RESEND [PATCH 2/3] NetXen: Support per PCI-function interrupt mask registers
This patch updates the various access routines to access different
control and status settings present in different register locations.
This will fix problems related to working of different ports in
multi Port card.
Signed-off by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off by: Milan Bag <mbag@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 91f25e0..6ce93fc 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -937,6 +937,7 @@
struct netxen_ring_ctx *ctx_desc;
struct pci_dev *ctx_desc_pdev;
dma_addr_t ctx_desc_phys_addr;
+ int intr_scheme;
int (*enable_phy_interrupts) (struct netxen_adapter *);
int (*disable_phy_interrupts) (struct netxen_adapter *);
void (*handle_phy_intr) (struct netxen_adapter *);
@@ -1080,37 +1081,106 @@
static inline void netxen_nic_disable_int(struct netxen_adapter *adapter)
{
- /*
- * ISR_INT_MASK: Can be read from window 0 or 1.
- */
- writel(0x7ff, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
+ uint32_t mask = 0x7ff;
+ int retries = 32;
+ DPRINTK(1, INFO, "Entered ISR Disable \n");
+
+ switch (adapter->portnum) {
+ case 0:
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
+ break;
+ case 1:
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
+ break;
+ case 2:
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
+ break;
+ case 3:
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
+ break;
+ }
+
+ if (adapter->intr_scheme != -1 &&
+ adapter->intr_scheme != INTR_SCHEME_PERPORT) {
+ writel(mask,
+ (void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK)));
+ }
+
+ /* Window = 0 or 1 */
+ if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
+ do {
+ writel(0xffffffff, (void *)
+ (PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_STATUS)));
+ mask = readl((void *)
+ (pci_base_offset(adapter, ISR_INT_VECTOR)));
+ if (!(mask & 0x80))
+ break;
+ udelay(10);
+ } while (--retries);
+
+ if (!retries) {
+ printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n",
+ netxen_nic_driver_name);
+ }
+ }
+
+ DPRINTK(1, INFO, "Done with Disable Int\n");
+
+ return;
}
static inline void netxen_nic_enable_int(struct netxen_adapter *adapter)
{
u32 mask;
- switch (adapter->ahw.board_type) {
- case NETXEN_NIC_GBE:
- mask = 0x77b;
+ DPRINTK(1, INFO, "Entered ISR Enable \n");
+
+ if (adapter->intr_scheme != -1 &&
+ adapter->intr_scheme != INTR_SCHEME_PERPORT) {
+ switch (adapter->ahw.board_type) {
+ case NETXEN_NIC_GBE:
+ mask = 0x77b;
+ break;
+ case NETXEN_NIC_XGBE:
+ mask = 0x77f;
+ break;
+ default:
+ mask = 0x7ff;
+ break;
+ }
+
+ writel(mask,
+ (void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK)));
+ }
+ switch (adapter->portnum) {
+ case 0:
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
break;
- case NETXEN_NIC_XGBE:
- mask = 0x77f;
+ case 1:
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
break;
- default:
- mask = 0x7ff;
+ case 2:
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
+ break;
+ case 3:
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
break;
}
- writel(mask, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
-
if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
mask = 0xbff;
- writel(0X0, NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
- writel(mask, PCI_OFFSET_SECOND_RANGE(adapter,
- ISR_INT_TARGET_MASK));
+ if (adapter->intr_scheme != -1 &&
+ adapter->intr_scheme != INTR_SCHEME_PERPORT) {
+ writel(0X0, NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
+ }
+ writel(mask,
+ (void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_MASK)));
}
+
+ DPRINTK(1, INFO, "Done with enable Int\n");
+
+ return;
}
/*
