pcmcia: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/pcmcia/au1000_db1x00.c b/drivers/pcmcia/au1000_db1x00.c
index 74e0515..c78d77f 100644
--- a/drivers/pcmcia/au1000_db1x00.c
+++ b/drivers/pcmcia/au1000_db1x00.c
@@ -194,7 +194,7 @@
default:
pwr |= SET_VCC_VPP(0,0,sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
state->Vcc,
state->Vpp);
break;
@@ -215,7 +215,7 @@
default:
pwr |= SET_VCC_VPP(0,0,sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
state->Vcc,
state->Vpp);
break;
@@ -224,7 +224,7 @@
default: /* what's this ? */
pwr |= SET_VCC_VPP(0,0,sock);
printk(KERN_ERR "%s: bad Vcc %d\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
break;
}
diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c
index 86c0808..157e414 100644
--- a/drivers/pcmcia/au1000_pb1x00.c
+++ b/drivers/pcmcia/au1000_pb1x00.c
@@ -244,7 +244,7 @@
pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
configure->sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
configure->vcc,
configure->vpp);
break;
@@ -272,7 +272,7 @@
pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
configure->sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
configure->vcc,
configure->vpp);
break;
@@ -300,7 +300,7 @@
pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
configure->sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
configure->vcc,
configure->vpp);
break;
@@ -309,7 +309,7 @@
default: /* what's this ? */
pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,configure->sock);
printk(KERN_ERR "%s: bad Vcc %d\n",
- __FUNCTION__, configure->vcc);
+ __func__, configure->vcc);
break;
}
@@ -353,7 +353,7 @@
default:
pcr |= SET_VCC_VPP(0,0);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
configure->vcc,
configure->vpp);
break;
@@ -374,7 +374,7 @@
default:
pcr |= SET_VCC_VPP(0,0);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
configure->vcc,
configure->vpp);
break;
@@ -383,7 +383,7 @@
default: /* what's this ? */
pcr |= SET_VCC_VPP(0,0);
printk(KERN_ERR "%s: bad Vcc %d\n",
- __FUNCTION__, configure->vcc);
+ __func__, configure->vcc);
break;
}
diff --git a/drivers/pcmcia/au1000_xxs1500.c b/drivers/pcmcia/au1000_xxs1500.c
index ce9d5c4..c78ed53 100644
--- a/drivers/pcmcia/au1000_xxs1500.c
+++ b/drivers/pcmcia/au1000_xxs1500.c
@@ -56,7 +56,7 @@
#define PCMCIA_IRQ AU1000_GPIO_4
#if 0
-#define DEBUG(x,args...) printk(__FUNCTION__ ": " x,##args)
+#define DEBUG(x, args...) printk(__func__ ": " x, ##args)
#else
#define DEBUG(x,args...)
#endif
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index bb6db3a..46314b4 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -153,7 +153,7 @@
static int omap_cf_ss_suspend(struct pcmcia_socket *s)
{
- pr_debug("%s: %s\n", driver_name, __FUNCTION__);
+ pr_debug("%s: %s\n", driver_name, __func__);
return omap_cf_set_socket(s, &dead_socket);
}
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index 4a05802..881ec8a 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -87,7 +87,7 @@
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
ret = -1;
}
@@ -104,7 +104,7 @@
pa_dwr_set |= GPIO_A0;
else {
printk(KERN_ERR "%s(): unrecognized Vpp %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
ret = -1;
break;
}
@@ -128,14 +128,14 @@
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
ret = -1;
break;
}
if (state->Vpp != state->Vcc && state->Vpp != 0) {
printk(KERN_ERR "%s(): CF slot cannot support Vpp %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
ret = -1;
break;
}
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index 6fa5eaa..145b85e 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -99,7 +99,7 @@
case 50: power |= MST_PCMCIA_PWR_VCC_50; break;
default:
printk(KERN_ERR "%s(): bad Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
ret = -1;
}
@@ -111,7 +111,7 @@
power |= MST_PCMCIA_PWR_VPP_VCC;
} else {
printk(KERN_ERR "%s(): bad Vpp %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
ret = -1;
}
}
diff --git a/drivers/pcmcia/sa1100_assabet.c b/drivers/pcmcia/sa1100_assabet.c
index 7c57fdd..ce133ce 100644
--- a/drivers/pcmcia/sa1100_assabet.c
+++ b/drivers/pcmcia/sa1100_assabet.c
@@ -66,14 +66,14 @@
case 50:
printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V...\n",
- __FUNCTION__);
+ __func__);
case 33: /* Can only apply 3.3V to the CF slot. */
mask = ASSABET_BCR_CF_PWR;
break;
default:
- printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __FUNCTION__,
+ printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __func__,
state->Vcc);
return -1;
}
diff --git a/drivers/pcmcia/sa1100_badge4.c b/drivers/pcmcia/sa1100_badge4.c
index 62bfc75..607c3f3 100644
--- a/drivers/pcmcia/sa1100_badge4.c
+++ b/drivers/pcmcia/sa1100_badge4.c
@@ -82,14 +82,14 @@
case 0:
if ((state->Vcc != 0) &&
(state->Vcc != badge4_pcmvcc)) {
- complain_about_jumpering(__FUNCTION__, "pcmvcc",
+ complain_about_jumpering(__func__, "pcmvcc",
badge4_pcmvcc, state->Vcc);
// Apply power regardless of the jumpering.
// return -1;
}
if ((state->Vpp != 0) &&
(state->Vpp != badge4_pcmvpp)) {
- complain_about_jumpering(__FUNCTION__, "pcmvpp",
+ complain_about_jumpering(__func__, "pcmvpp",
badge4_pcmvpp, state->Vpp);
return -1;
}
@@ -98,7 +98,7 @@
case 1:
if ((state->Vcc != 0) &&
(state->Vcc != badge4_cfvcc)) {
- complain_about_jumpering(__FUNCTION__, "cfvcc",
+ complain_about_jumpering(__func__, "cfvcc",
badge4_cfvcc, state->Vcc);
return -1;
}
@@ -143,7 +143,7 @@
if (machine_is_badge4()) {
printk(KERN_INFO
"%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n",
- __FUNCTION__,
+ __func__,
badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc);
ret = sa11xx_drv_pcmcia_probe(dev, &badge4_pcmcia_ops, 0, 2);
diff --git a/drivers/pcmcia/sa1100_cerf.c b/drivers/pcmcia/sa1100_cerf.c
index 549a152..7c3951a 100644
--- a/drivers/pcmcia/sa1100_cerf.c
+++ b/drivers/pcmcia/sa1100_cerf.c
@@ -63,7 +63,7 @@
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
return -1;
}
diff --git a/drivers/pcmcia/sa1100_jornada720.c b/drivers/pcmcia/sa1100_jornada720.c
index 6284c35d..2167e67 100644
--- a/drivers/pcmcia/sa1100_jornada720.c
+++ b/drivers/pcmcia/sa1100_jornada720.c
@@ -42,7 +42,7 @@
unsigned int pa_dwr_mask, pa_dwr_set;
int ret;
-printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__,
+printk("%s(): config socket %d vcc %d vpp %d\n", __func__,
skt->nr, state->Vcc, state->Vpp);
switch (skt->nr) {
@@ -74,7 +74,7 @@
if (state->Vpp != state->Vcc && state->Vpp != 0) {
printk(KERN_ERR "%s(): slot cannot support VPP %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
return -1;
}
diff --git a/drivers/pcmcia/sa1100_neponset.c b/drivers/pcmcia/sa1100_neponset.c
index 5bc9e95..687492f 100644
--- a/drivers/pcmcia/sa1100_neponset.c
+++ b/drivers/pcmcia/sa1100_neponset.c
@@ -59,7 +59,7 @@
ncr_set = NCR_A0VPP;
else {
printk(KERN_ERR "%s(): unrecognized VPP %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
return -1;
}
break;
@@ -71,7 +71,7 @@
if (state->Vpp != state->Vcc && state->Vpp != 0) {
printk(KERN_ERR "%s(): CF slot cannot support VPP %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
return -1;
}
break;
diff --git a/drivers/pcmcia/sa1100_shannon.c b/drivers/pcmcia/sa1100_shannon.c
index 9456f54..494912f 100644
--- a/drivers/pcmcia/sa1100_shannon.c
+++ b/drivers/pcmcia/sa1100_shannon.c
@@ -73,19 +73,19 @@
{
switch (state->Vcc) {
case 0: /* power off */
- printk(KERN_WARNING "%s(): CS asked for 0V, still applying 3.3V..\n", __FUNCTION__);
+ printk(KERN_WARNING "%s(): CS asked for 0V, still applying 3.3V..\n", __func__);
break;
case 50:
- printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V..\n", __FUNCTION__);
+ printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V..\n", __func__);
case 33:
break;
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
return -1;
}
- printk(KERN_WARNING "%s(): Warning, Can't perform reset\n", __FUNCTION__);
+ printk(KERN_WARNING "%s(): Warning, Can't perform reset\n", __func__);
/* Silently ignore Vpp, output enable, speaker enable. */
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
index 04d6f7f..42567de 100644
--- a/drivers/pcmcia/sa1100_simpad.c
+++ b/drivers/pcmcia/sa1100_simpad.c
@@ -90,7 +90,7 @@
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
local_irq_restore(flags);
return -1;
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 7835648..420a775 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -354,7 +354,7 @@
(map->flags&MAP_PREFETCH)?"PREFETCH ":"");
if (map->map >= MAX_IO_WIN) {
- printk(KERN_ERR "%s(): map (%d) out of range\n", __FUNCTION__,
+ printk(KERN_ERR "%s(): map (%d) out of range\n", __func__,
map->map);
return -1;
}
