[SCSI] nsp32: convert to use the data buffer accessors
- remove the unnecessary map_single path.
- convert to use the new accessors for the sg lists and the
parameters.
Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: GOTO Masanori <gotom@sanori.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index e4dfdfb..8cc9e64 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -719,7 +719,7 @@
command = 0;
command |= (TRANSFER_GO | ALL_COUNTER_CLR);
if (data->trans_method & NSP32_TRANSFER_BUSMASTER) {
- if (SCpnt->request_bufflen > 0) {
+ if (scsi_bufflen(SCpnt) > 0) {
command |= BM_START;
}
} else if (data->trans_method & NSP32_TRANSFER_MMIO) {
@@ -868,31 +868,28 @@
static int nsp32_setup_sg_table(struct scsi_cmnd *SCpnt)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
- struct scatterlist *sgl;
+ struct scatterlist *sg;
nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt;
int num, i;
u32_le l;
- if (SCpnt->request_bufflen == 0) {
- return TRUE;
- }
-
if (sgt == NULL) {
nsp32_dbg(NSP32_DEBUG_SGLIST, "SGT == null");
return FALSE;
}
- if (SCpnt->use_sg) {
- sgl = (struct scatterlist *)SCpnt->request_buffer;
- num = pci_map_sg(data->Pci, sgl, SCpnt->use_sg,
- SCpnt->sc_data_direction);
- for (i = 0; i < num; i++) {
+ num = scsi_dma_map(SCpnt);
+ if (!num)
+ return TRUE;
+ else if (num < 0)
+ return FALSE;
+ else {
+ scsi_for_each_sg(SCpnt, sg, num, i) {
/*
* Build nsp32_sglist, substitute sg dma addresses.
*/
- sgt[i].addr = cpu_to_le32(sg_dma_address(sgl));
- sgt[i].len = cpu_to_le32(sg_dma_len(sgl));
- sgl++;
+ sgt[i].addr = cpu_to_le32(sg_dma_address(sg));
+ sgt[i].len = cpu_to_le32(sg_dma_len(sg));
if (le32_to_cpu(sgt[i].len) > 0x10000) {
nsp32_msg(KERN_ERR,
@@ -909,23 +906,6 @@
/* set end mark */
l = le32_to_cpu(sgt[num-1].len);
sgt[num-1].len = cpu_to_le32(l | SGTEND);
-
- } else {
- SCpnt->SCp.have_data_in = pci_map_single(data->Pci,
- SCpnt->request_buffer, SCpnt->request_bufflen,
- SCpnt->sc_data_direction);
-
- sgt[0].addr = cpu_to_le32(SCpnt->SCp.have_data_in);
- sgt[0].len = cpu_to_le32(SCpnt->request_bufflen | SGTEND); /* set end mark */
-
- if (SCpnt->request_bufflen > 0x10000) {
- nsp32_msg(KERN_ERR,
- "can't transfer over 64KB at a time, size=0x%lx", SCpnt->request_bufflen);
- return FALSE;
- }
- nsp32_dbg(NSP32_DEBUG_SGLIST, "single : addr 0x%lx len=0x%lx",
- le32_to_cpu(sgt[0].addr),
- le32_to_cpu(sgt[0].len ));
}
return TRUE;
@@ -942,7 +922,7 @@
"enter. target: 0x%x LUN: 0x%x cmnd: 0x%x cmndlen: 0x%x "
"use_sg: 0x%x reqbuf: 0x%lx reqlen: 0x%x",
SCpnt->device->id, SCpnt->device->lun, SCpnt->cmnd[0], SCpnt->cmd_len,
- SCpnt->use_sg, SCpnt->request_buffer, SCpnt->request_bufflen);
+ scsi_sg_count(SCpnt), scsi_sglist(SCpnt), scsi_bufflen(SCpnt));
if (data->CurrentSC != NULL) {
nsp32_msg(KERN_ERR, "Currentsc != NULL. Cancel this command request");
@@ -974,10 +954,10 @@
data->CurrentSC = SCpnt;
SCpnt->SCp.Status = CHECK_CONDITION;
SCpnt->SCp.Message = 0;
- SCpnt->resid = SCpnt->request_bufflen;
+ scsi_set_resid(SCpnt, scsi_bufflen(SCpnt));
- SCpnt->SCp.ptr = (char *) SCpnt->request_buffer;
- SCpnt->SCp.this_residual = SCpnt->request_bufflen;
+ SCpnt->SCp.ptr = (char *)scsi_sglist(SCpnt);
+ SCpnt->SCp.this_residual = scsi_bufflen(SCpnt);
SCpnt->SCp.buffer = NULL;
SCpnt->SCp.buffers_residual = 0;
@@ -1288,7 +1268,7 @@
}
if ((auto_stat & DATA_IN_PHASE) &&
- (SCpnt->resid > 0) &&
+ (scsi_get_resid(SCpnt) > 0) &&
((nsp32_read2(base, FIFO_REST_CNT) & FIFO_REST_MASK) != 0)) {
printk( "auto+fifo\n");
//nsp32_pio_read(SCpnt);
@@ -1309,7 +1289,7 @@
nsp32_dbg(NSP32_DEBUG_INTR, "SSACK=0x%lx",
nsp32_read4(base, SAVED_SACK_CNT));
- SCpnt->resid = 0; /* all data transfered! */
+ scsi_set_resid(SCpnt, 0); /* all data transfered! */
}
/*
@@ -1577,25 +1557,8 @@
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
unsigned int base = SCpnt->device->host->io_port;
- /*
- * unmap pci
- */
- if (SCpnt->request_bufflen == 0) {
- goto skip;
- }
+ scsi_dma_unmap(SCpnt);
- if (SCpnt->use_sg) {
- pci_unmap_sg(data->Pci,
- (struct scatterlist *)SCpnt->request_buffer,
- SCpnt->use_sg, SCpnt->sc_data_direction);
- } else {
- pci_unmap_single(data->Pci,
- (u32)SCpnt->SCp.have_data_in,
- SCpnt->request_bufflen,
- SCpnt->sc_data_direction);
- }
-
- skip:
/*
* clear TRANSFERCONTROL_BM_START
*/
@@ -1751,7 +1714,7 @@
SCpnt->SCp.Message = 0;
nsp32_dbg(NSP32_DEBUG_BUSFREE,
"normal end stat=0x%x resid=0x%x\n",
- SCpnt->SCp.Status, SCpnt->resid);
+ SCpnt->SCp.Status, scsi_get_resid(SCpnt));
SCpnt->result = (DID_OK << 16) |
(SCpnt->SCp.Message << 8) |
(SCpnt->SCp.Status << 0);
@@ -1795,7 +1758,7 @@
unsigned int restlen, sentlen;
u32_le len, addr;
- nsp32_dbg(NSP32_DEBUG_SGLIST, "old resid=0x%x", SCpnt->resid);
+ nsp32_dbg(NSP32_DEBUG_SGLIST, "old resid=0x%x", scsi_get_resid(SCpnt));
/* adjust saved SACK count with 4 byte start address boundary */
s_sacklen -= le32_to_cpu(sgt[old_entry].addr) & 3;
@@ -1839,12 +1802,12 @@
return;
last:
- if (SCpnt->resid < sentlen) {
+ if (scsi_get_resid(SCpnt) < sentlen) {
nsp32_msg(KERN_ERR, "resid underflow");
}
- SCpnt->resid -= sentlen;
- nsp32_dbg(NSP32_DEBUG_SGLIST, "new resid=0x%x", SCpnt->resid);
+ scsi_set_resid(SCpnt, scsi_get_resid(SCpnt) - sentlen);
+ nsp32_dbg(NSP32_DEBUG_SGLIST, "new resid=0x%x", scsi_get_resid(SCpnt));
/* update hostdata and lun */
@@ -1973,7 +1936,7 @@
transfer = 0;
transfer |= (TRANSFER_GO | ALL_COUNTER_CLR);
if (data->trans_method & NSP32_TRANSFER_BUSMASTER) {
- if (SCpnt->request_bufflen > 0) {
+ if (scsi_bufflen(SCpnt) > 0) {
transfer |= BM_START;
}
} else if (data->trans_method & NSP32_TRANSFER_MMIO) {
