iwlegacy: s/IL_RATE/RATE/
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
diff --git a/drivers/net/wireless/iwlegacy/iwl-3945.c b/drivers/net/wireless/iwlegacy/iwl-3945.c
index fa4c33a..728a90c 100644
--- a/drivers/net/wireless/iwlegacy/iwl-3945.c
+++ b/drivers/net/wireless/iwlegacy/iwl-3945.c
@@ -52,26 +52,26 @@
#include "iwl-3945-debugfs.h"
#define IL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \
- [IL_RATE_##r##M_INDEX] = { IL_RATE_##r##M_PLCP, \
- IL_RATE_##r##M_IEEE, \
- IL_RATE_##ip##M_INDEX, \
- IL_RATE_##in##M_INDEX, \
- IL_RATE_##rp##M_INDEX, \
- IL_RATE_##rn##M_INDEX, \
- IL_RATE_##pp##M_INDEX, \
- IL_RATE_##np##M_INDEX, \
- IL_RATE_##r##M_INDEX_TABLE, \
- IL_RATE_##ip##M_INDEX_TABLE }
+ [RATE_##r##M_INDEX] = { RATE_##r##M_PLCP, \
+ RATE_##r##M_IEEE, \
+ RATE_##ip##M_INDEX, \
+ RATE_##in##M_INDEX, \
+ RATE_##rp##M_INDEX, \
+ RATE_##rn##M_INDEX, \
+ RATE_##pp##M_INDEX, \
+ RATE_##np##M_INDEX, \
+ RATE_##r##M_INDEX_TABLE, \
+ RATE_##ip##M_INDEX_TABLE }
/*
* Parameter order:
* rate, prev rate, next rate, prev tgg rate, next tgg rate
*
* If there isn't a valid next or previous rate then INV is used which
- * maps to IL_RATE_INVALID
+ * maps to RATE_INVALID
*
*/
-const struct il3945_rate_info il3945_rates[IL_RATE_COUNT_3945] = {
+const struct il3945_rate_info il3945_rates[RATE_COUNT_3945] = {
IL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */
IL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */
IL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */
@@ -90,7 +90,7 @@
{
u8 rate = il3945_rates[rate_index].prev_ieee;
- if (rate == IL_RATE_INVALID)
+ if (rate == RATE_INVALID)
rate = rate_index;
return rate;
}
@@ -194,7 +194,7 @@
{
int idx;
- for (idx = 0; idx < IL_RATE_COUNT_3945; idx++)
+ for (idx = 0; idx < RATE_COUNT_3945; idx++)
if (il3945_rates[idx].plcp == plcp)
return idx;
return -1;
@@ -246,16 +246,16 @@
switch (il->band) {
case IEEE80211_BAND_5GHZ:
- if (rate == IL_RATE_12M_INDEX)
- next_rate = IL_RATE_9M_INDEX;
- else if (rate == IL_RATE_6M_INDEX)
- next_rate = IL_RATE_6M_INDEX;
+ if (rate == RATE_12M_INDEX)
+ next_rate = RATE_9M_INDEX;
+ else if (rate == RATE_6M_INDEX)
+ next_rate = RATE_6M_INDEX;
break;
case IEEE80211_BAND_2GHZ:
if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) &&
il_is_associated(il)) {
- if (rate == IL_RATE_11M_INDEX)
- next_rate = IL_RATE_5M_INDEX;
+ if (rate == RATE_11M_INDEX)
+ next_rate = RATE_5M_INDEX;
}
break;
@@ -675,7 +675,7 @@
int sta_id, int tx_id)
{
u16 hw_value = ieee80211_get_tx_rate(il->hw, info)->hw_value;
- u16 rate_index = min(hw_value & 0xffff, IL_RATE_COUNT_3945);
+ u16 rate_index = min(hw_value & 0xffff, RATE_COUNT_3945);
u16 rate_mask;
int rate;
u8 rts_retry_limit;
@@ -689,7 +689,7 @@
/* We need to figure out how to get the sta->supp_rates while
* in this running context */
- rate_mask = IL_RATES_MASK_3945;
+ rate_mask = RATES_MASK_3945;
/* Set retry limit on DATA packets and Probe Responses*/
if (ieee80211_is_probe_resp(fc))
@@ -1330,7 +1330,7 @@
/* use this channel group's 6Mbit clipping/saturation pwr,
* but cap at regulatory scan power restriction (set during init
* based on eeprom channel data) for this channel. */
- power = min(ch_info->scan_power, clip_pwrs[IL_RATE_6M_INDEX_TABLE]);
+ power = min(ch_info->scan_power, clip_pwrs[RATE_6M_INDEX_TABLE]);
power = min(power, il->tx_power_user_lmt);
scan_power_info->requested_power = power;
@@ -1342,7 +1342,7 @@
* *index*. */
power_index = ch_info->power_info[rate_index].power_table_index
- (power - ch_info->power_info
- [IL_RATE_6M_INDEX_TABLE].requested_power) * 2;
+ [RATE_6M_INDEX_TABLE].requested_power) * 2;
/* store reference index that we use when adjusting *all* scan
* powers. So we can accommodate user (all channel) or spectrum
@@ -1466,7 +1466,7 @@
power_info = ch_info->power_info;
/* update OFDM Txpower settings */
- for (i = IL_RATE_6M_INDEX_TABLE; i <= IL_RATE_54M_INDEX_TABLE;
+ for (i = RATE_6M_INDEX_TABLE; i <= RATE_54M_INDEX_TABLE;
i++, ++power_info) {
int delta_idx;
@@ -1490,14 +1490,14 @@
* ... all CCK power settings for a given channel are the *same*. */
if (power_changed) {
power =
- ch_info->power_info[IL_RATE_12M_INDEX_TABLE].
+ ch_info->power_info[RATE_12M_INDEX_TABLE].
requested_power + IL_CCK_FROM_OFDM_POWER_DIFF;
/* do all CCK rates' il3945_channel_power_info structures */
- for (i = IL_RATE_1M_INDEX_TABLE; i <= IL_RATE_11M_INDEX_TABLE; i++) {
+ for (i = RATE_1M_INDEX_TABLE; i <= RATE_11M_INDEX_TABLE; i++) {
power_info->requested_power = power;
power_info->base_power_index =
- ch_info->power_info[IL_RATE_12M_INDEX_TABLE].
+ ch_info->power_info[RATE_12M_INDEX_TABLE].
base_power_index + IL_CCK_FROM_OFDM_INDEX_DIFF;
++power_info;
}
@@ -1574,7 +1574,7 @@
ref_temp);
/* set tx power value for all rates, OFDM and CCK */
- for (rate_index = 0; rate_index < IL_RATE_COUNT_3945;
+ for (rate_index = 0; rate_index < RATE_COUNT_3945;
rate_index++) {
int power_idx =
ch_info->power_info[rate_index].base_power_index;
@@ -1597,7 +1597,7 @@
for (scan_tbl_index = 0;
scan_tbl_index < IL_NUM_SCAN_RATES; scan_tbl_index++) {
s32 actual_index = (scan_tbl_index == 0) ?
- IL_RATE_1M_INDEX_TABLE : IL_RATE_6M_INDEX_TABLE;
+ RATE_1M_INDEX_TABLE : RATE_6M_INDEX_TABLE;
il3945_hw_reg_set_scan_power(il, scan_tbl_index,
actual_index, clip_pwrs,
ch_info, a_band);
@@ -2010,21 +2010,21 @@
/* fill in channel group's nominal powers for each rate */
for (rate_index = 0;
- rate_index < IL_RATE_COUNT_3945; rate_index++, clip_pwrs++) {
+ rate_index < RATE_COUNT_3945; rate_index++, clip_pwrs++) {
switch (rate_index) {
- case IL_RATE_36M_INDEX_TABLE:
+ case RATE_36M_INDEX_TABLE:
if (i == 0) /* B/G */
*clip_pwrs = satur_pwr;
else /* A */
*clip_pwrs = satur_pwr - 5;
break;
- case IL_RATE_48M_INDEX_TABLE:
+ case RATE_48M_INDEX_TABLE:
if (i == 0)
*clip_pwrs = satur_pwr - 7;
else
*clip_pwrs = satur_pwr - 10;
break;
- case IL_RATE_54M_INDEX_TABLE:
+ case RATE_54M_INDEX_TABLE:
if (i == 0)
*clip_pwrs = satur_pwr - 9;
else
@@ -2139,7 +2139,7 @@
}
/* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
- pwr_info = &ch_info->power_info[IL_RATE_12M_INDEX_TABLE];
+ pwr_info = &ch_info->power_info[RATE_12M_INDEX_TABLE];
power = pwr_info->requested_power +
IL_CCK_FROM_OFDM_POWER_DIFF;
pwr_index = pwr_info->power_table_index +
@@ -2169,7 +2169,7 @@
for (scan_tbl_index = 0;
scan_tbl_index < IL_NUM_SCAN_RATES; scan_tbl_index++) {
s32 actual_index = (scan_tbl_index == 0) ?
- IL_RATE_1M_INDEX_TABLE : IL_RATE_6M_INDEX_TABLE;
+ RATE_1M_INDEX_TABLE : RATE_6M_INDEX_TABLE;
il3945_hw_reg_set_scan_power(il, scan_tbl_index,
actual_index, clip_pwrs, ch_info, a_band);
}
@@ -2289,7 +2289,7 @@
il3945_sync_sta(il, vif_priv->ibss_bssid_sta_id,
(il->band == IEEE80211_BAND_5GHZ) ?
- IL_RATE_6M_PLCP : IL_RATE_1M_PLCP);
+ RATE_6M_PLCP : RATE_1M_PLCP);
il3945_rate_scale_init(il->hw, vif_priv->ibss_bssid_sta_id);
return 0;
@@ -2326,17 +2326,17 @@
D_RATE("Select A mode rate scale\n");
/* If one of the following CCK rates is used,
* have it fall back to the 6M OFDM rate */
- for (i = IL_RATE_1M_INDEX_TABLE;
- i <= IL_RATE_11M_INDEX_TABLE; i++)
+ for (i = RATE_1M_INDEX_TABLE;
+ i <= RATE_11M_INDEX_TABLE; i++)
table[i].next_rate_index =
il3945_rates[IL_FIRST_OFDM_RATE].table_rs_index;
/* Don't fall back to CCK rates */
- table[IL_RATE_12M_INDEX_TABLE].next_rate_index =
- IL_RATE_9M_INDEX_TABLE;
+ table[RATE_12M_INDEX_TABLE].next_rate_index =
+ RATE_9M_INDEX_TABLE;
/* Don't drop out of OFDM rates */
- table[IL_RATE_6M_INDEX_TABLE].next_rate_index =
+ table[RATE_6M_INDEX_TABLE].next_rate_index =
il3945_rates[IL_FIRST_OFDM_RATE].table_rs_index;
break;
@@ -2349,14 +2349,14 @@
il_is_associated(il)) {
index = IL_FIRST_CCK_RATE;
- for (i = IL_RATE_6M_INDEX_TABLE;
- i <= IL_RATE_54M_INDEX_TABLE; i++)
+ for (i = RATE_6M_INDEX_TABLE;
+ i <= RATE_54M_INDEX_TABLE; i++)
table[i].next_rate_index =
il3945_rates[index].table_rs_index;
- index = IL_RATE_11M_INDEX_TABLE;
+ index = RATE_11M_INDEX_TABLE;
/* CCK shouldn't fall back to OFDM... */
- table[index].next_rate_index = IL_RATE_5M_INDEX_TABLE;
+ table[index].next_rate_index = RATE_5M_INDEX_TABLE;
}
break;
