diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 020cccd..1d06723 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -194,18 +194,22 @@
  (*) On any given CPU, dependent memory accesses will be issued in order, with
      respect to itself.  This means that for:
 
-	Q = P; D = *Q;
+	ACCESS_ONCE(Q) = P; smp_read_barrier_depends(); D = ACCESS_ONCE(*Q);
 
      the CPU will issue the following memory operations:
 
 	Q = LOAD P, D = LOAD *Q
 
-     and always in that order.
+     and always in that order.  On most systems, smp_read_barrier_depends()
+     does nothing, but it is required for DEC Alpha.  The ACCESS_ONCE()
+     is required to prevent compiler mischief.  Please note that you
+     should normally use something like rcu_dereference() instead of
+     open-coding smp_read_barrier_depends().
 
  (*) Overlapping loads and stores within a particular CPU will appear to be
      ordered within that CPU.  This means that for:
 
-	a = *X; *X = b;
+	a = ACCESS_ONCE(*X); ACCESS_ONCE(*X) = b;
 
      the CPU will only issue the following sequence of memory operations:
 
@@ -213,7 +217,7 @@
 
      And for:
 
-	*X = c; d = *X;
+	ACCESS_ONCE(*X) = c; d = ACCESS_ONCE(*X);
 
      the CPU will only issue:
 
@@ -224,6 +228,41 @@
 
 And there are a number of things that _must_ or _must_not_ be assumed:
 
+ (*) It _must_not_ be assumed that the compiler will do what you want with
+     memory references that are not protected by ACCESS_ONCE().  Without
+     ACCESS_ONCE(), the compiler is within its rights to do all sorts
+     of "creative" transformations:
+
+     (-) Repeat the load, possibly getting a different value on the second
+         and subsequent loads.  This is especially prone to happen when
+	 register pressure is high.
+
+     (-) Merge adjacent loads and stores to the same location.  The most
+         familiar example is the transformation from:
+
+		while (a)
+			do_something();
+
+         to something like:
+
+		if (a)
+			for (;;)
+				do_something();
+
+         Using ACCESS_ONCE() as follows prevents this sort of optimization:
+
+		while (ACCESS_ONCE(a))
+			do_something();
+
+     (-) "Store tearing", where a single store in the source code is split
+         into smaller stores in the object code.  Note that gcc really
+	 will do this on some architectures when storing certain constants.
+	 It can be cheaper to do a series of immediate stores than to
+	 form the constant in a register and then to store that register.
+
+     (-) "Load tearing", which splits loads in a manner analogous to
+     	 store tearing.
+
  (*) It _must_not_ be assumed that independent loads and stores will be issued
      in the order given.  This means that for:
 
@@ -450,14 +489,14 @@
 it's not always obvious that they're needed.  To illustrate, consider the
 following sequence of events:
 
-	CPU 1		CPU 2
-	===============	===============
+	CPU 1		      CPU 2
+	===============	      ===============
 	{ A == 1, B == 2, C = 3, P == &A, Q == &C }
 	B = 4;
 	<write barrier>
-	P = &B
-			Q = P;
-			D = *Q;
+	ACCESS_ONCE(P) = &B
+			      Q = ACCESS_ONCE(P);
+			      D = *Q;
 
 There's a clear data dependency here, and it would seem that by the end of the
 sequence, Q must be either &A or &B, and that:
@@ -477,15 +516,15 @@
 To deal with this, a data dependency barrier or better must be inserted
 between the address load and the data load:
 
-	CPU 1		CPU 2
-	===============	===============
+	CPU 1		      CPU 2
+	===============	      ===============
 	{ A == 1, B == 2, C = 3, P == &A, Q == &C }
 	B = 4;
 	<write barrier>
-	P = &B
-			Q = P;
-			<data dependency barrier>
-			D = *Q;
+	ACCESS_ONCE(P) = &B
+			      Q = ACCESS_ONCE(P);
+			      <data dependency barrier>
+			      D = *Q;
 
 This enforces the occurrence of one of the two implications, and prevents the
 third possibility from arising.
@@ -504,21 +543,22 @@
 number is read from memory and then used to calculate the index for an array
 access:
 
-	CPU 1		CPU 2
-	===============	===============
+	CPU 1		      CPU 2
+	===============	      ===============
 	{ M[0] == 1, M[1] == 2, M[3] = 3, P == 0, Q == 3 }
 	M[1] = 4;
 	<write barrier>
-	P = 1
-			Q = P;
-			<data dependency barrier>
-			D = M[Q];
+	ACCESS_ONCE(P) = 1
+			      Q = ACCESS_ONCE(P);
+			      <data dependency barrier>
+			      D = M[Q];
 
 
-The data dependency barrier is very important to the RCU system, for example.
-See rcu_dereference() in include/linux/rcupdate.h.  This permits the current
-target of an RCU'd pointer to be replaced with a new modified target, without
-the replacement target appearing to be incompletely initialised.
+The data dependency barrier is very important to the RCU system,
+for example.  See rcu_assign_pointer() and rcu_dereference() in
+include/linux/rcupdate.h.  This permits the current target of an RCU'd
+pointer to be replaced with a new modified target, without the replacement
+target appearing to be incompletely initialised.
 
 See also the subsection on "Cache Coherency" for a more thorough example.
 
@@ -530,22 +570,23 @@
 dependency barrier to make it work correctly.  Consider the following bit of
 code:
 
-	q = &a;
+	q = ACCESS_ONCE(a);
 	if (p) {
 		<data dependency barrier>
-		q = &b;
+		q = ACCESS_ONCE(b);
 	}
 	x = *q;
 
 This will not have the desired effect because there is no actual data
-dependency, but rather a control dependency that the CPU may short-circuit by
-attempting to predict the outcome in advance.  In such a case what's actually
-required is:
+dependency, but rather a control dependency that the CPU may short-circuit
+by attempting to predict the outcome in advance, so that other CPUs see
+the load from b as having happened before the load from a.  In such a
+case what's actually required is:
 
-	q = &a;
+	q = ACCESS_ONCE(a);
 	if (p) {
 		<read barrier>
-		q = &b;
+		q = ACCESS_ONCE(b);
 	}
 	x = *q;
 
@@ -561,23 +602,23 @@
 barrier or a data dependency barrier should always be paired with at least an
 write barrier, though, again, a general barrier is viable:
 
-	CPU 1		CPU 2
-	===============	===============
-	a = 1;
+	CPU 1		      CPU 2
+	===============	      ===============
+	ACCESS_ONCE(a) = 1;
 	<write barrier>
-	b = 2;		x = b;
-			<read barrier>
-			y = a;
+	ACCESS_ONCE(b) = 2;   x = ACCESS_ONCE(b);
+			      <read barrier>
+			      y = ACCESS_ONCE(a);
 
 Or:
 
-	CPU 1		CPU 2
-	===============	===============================
+	CPU 1		      CPU 2
+	===============	      ===============================
 	a = 1;
 	<write barrier>
-	b = &a;		x = b;
-			<data dependency barrier>
-			y = *x;
+	ACCESS_ONCE(b) = &a;  x = ACCESS_ONCE(b);
+			      <data dependency barrier>
+			      y = *x;
 
 Basically, the read barrier always has to be there, even though it can be of
 the "weaker" type.
@@ -586,13 +627,13 @@
 match the loads after the read barrier or the data dependency barrier, and vice
 versa:
 
-	CPU 1                           CPU 2
-	===============                 ===============
-	a = 1;           }----   --->{  v = c
-	b = 2;           }    \ /    {  w = d
-	<write barrier>        \        <read barrier>
-	c = 3;           }    / \    {  x = a;
-	d = 4;           }----   --->{  y = b;
+	CPU 1                               CPU 2
+	===================                 ===================
+	ACCESS_ONCE(a) = 1;  }----   --->{  v = ACCESS_ONCE(c);
+	ACCESS_ONCE(b) = 2;  }    \ /    {  w = ACCESS_ONCE(d);
+	<write barrier>            \        <read barrier>
+	ACCESS_ONCE(c) = 3;  }    / \    {  x = ACCESS_ONCE(a);
+	ACCESS_ONCE(d) = 4;  }----   --->{  y = ACCESS_ONCE(b);
 
 
 EXAMPLES OF MEMORY BARRIER SEQUENCES
@@ -1435,12 +1476,12 @@
 
 	CPU 1				CPU 2
 	===============================	===============================
-	*A = a;				*E = e;
+	ACCESS_ONCE(*A) = a;		ACCESS_ONCE(*E) = e;
 	LOCK M				LOCK Q
-	*B = b;				*F = f;
-	*C = c;				*G = g;
+	ACCESS_ONCE(*B) = b;		ACCESS_ONCE(*F) = f;
+	ACCESS_ONCE(*C) = c;		ACCESS_ONCE(*G) = g;
 	UNLOCK M			UNLOCK Q
-	*D = d;				*H = h;
+	ACCESS_ONCE(*D) = d;		ACCESS_ONCE(*H) = h;
 
 Then there is no guarantee as to what order CPU 3 will see the accesses to *A
 through *H occur in, other than the constraints imposed by the separate locks
@@ -1460,17 +1501,17 @@
 
 	CPU 1				CPU 2
 	===============================	===============================
-	*A = a;
-	LOCK M		[1]
-	*B = b;
-	*C = c;
-	UNLOCK M	[1]
-	*D = d;				*E = e;
-					LOCK M		[2]
-					*F = f;
-					*G = g;
-					UNLOCK M	[2]
-					*H = h;
+	ACCESS_ONCE(*A) = a;
+	LOCK M		     [1]
+	ACCESS_ONCE(*B) = b;
+	ACCESS_ONCE(*C) = c;
+	UNLOCK M	     [1]
+	ACCESS_ONCE(*D) = d;		ACCESS_ONCE(*E) = e;
+					LOCK M		     [2]
+					ACCESS_ONCE(*F) = f;
+					ACCESS_ONCE(*G) = g;
+					UNLOCK M	     [2]
+					ACCESS_ONCE(*H) = h;
 
 CPU 3 might see:
 
@@ -2177,11 +2218,11 @@
 operations in exactly the order specified, so that if the CPU is, for example,
 given the following piece of code to execute:
 
-	a = *A;
-	*B = b;
-	c = *C;
-	d = *D;
-	*E = e;
+	a = ACCESS_ONCE(*A);
+	ACCESS_ONCE(*B) = b;
+	c = ACCESS_ONCE(*C);
+	d = ACCESS_ONCE(*D);
+	ACCESS_ONCE(*E) = e;
 
 they would then expect that the CPU will complete the memory operation for each
 instruction before moving on to the next one, leading to a definite sequence of
@@ -2228,12 +2269,12 @@
 _own_ accesses appear to be correctly ordered, without the need for a memory
 barrier.  For instance with the following code:
 
-	U = *A;
-	*A = V;
-	*A = W;
-	X = *A;
-	*A = Y;
-	Z = *A;
+	U = ACCESS_ONCE(*A);
+	ACCESS_ONCE(*A) = V;
+	ACCESS_ONCE(*A) = W;
+	X = ACCESS_ONCE(*A);
+	ACCESS_ONCE(*A) = Y;
+	Z = ACCESS_ONCE(*A);
 
 and assuming no intervention by an external influence, it can be assumed that
 the final result will appear to be:
@@ -2250,7 +2291,12 @@
 
 in that order, but, without intervention, the sequence may have almost any
 combination of elements combined or discarded, provided the program's view of
-the world remains consistent.
+the world remains consistent.  Note that ACCESS_ONCE() is -not- optional
+in the above example, as there are architectures where a given CPU might
+interchange successive loads to the same location.  On such architectures,
+ACCESS_ONCE() does whatever is necessary to prevent this, for example, on
+Itanium the volatile casts used by ACCESS_ONCE() cause GCC to emit the
+special ld.acq and st.rel instructions that prevent such reordering.
 
 The compiler may also combine, discard or defer elements of the sequence before
 the CPU even sees them.
@@ -2264,13 +2310,13 @@
 
 	*A = W;
 
-since, without a write barrier, it can be assumed that the effect of the
-storage of V to *A is lost.  Similarly:
+since, without either a write barrier or an ACCESS_ONCE(), it can be
+assumed that the effect of the storage of V to *A is lost.  Similarly:
 
 	*A = Y;
 	Z = *A;
 
-may, without a memory barrier, be reduced to:
+may, without a memory barrier or an ACCESS_ONCE(), be reduced to:
 
 	*A = Y;
 	Z = Y;