| // SPDX-License-Identifier: GPL-2.0-only |
| |
| /* PIPAPO: PIle PAcket POlicies: set for arbitrary concatenations of ranges |
| * |
| * Copyright (c) 2019-2020 Red Hat GmbH |
| * |
| * Author: Stefano Brivio <sbrivio@redhat.com> |
| */ |
| |
| /** |
| * DOC: Theory of Operation |
| * |
| * |
| * Problem |
| * ------- |
| * |
| * Match packet bytes against entries composed of ranged or non-ranged packet |
| * field specifiers, mapping them to arbitrary references. For example: |
| * |
| * :: |
| * |
| * --- fields ---> |
| * | [net],[port],[net]... => [reference] |
| * entries [net],[port],[net]... => [reference] |
| * | [net],[port],[net]... => [reference] |
| * V ... |
| * |
| * where [net] fields can be IP ranges or netmasks, and [port] fields are port |
| * ranges. Arbitrary packet fields can be matched. |
| * |
| * |
| * Algorithm Overview |
| * ------------------ |
| * |
| * This algorithm is loosely inspired by [Ligatti 2010], and fundamentally |
| * relies on the consideration that every contiguous range in a space of b bits |
| * can be converted into b * 2 netmasks, from Theorem 3 in [Rottenstreich 2010], |
| * as also illustrated in Section 9 of [Kogan 2014]. |
| * |
| * Classification against a number of entries, that require matching given bits |
| * of a packet field, is performed by grouping those bits in sets of arbitrary |
| * size, and classifying packet bits one group at a time. |
| * |
| * Example: |
| * to match the source port (16 bits) of a packet, we can divide those 16 bits |
| * in 4 groups of 4 bits each. Given the entry: |
| * 0000 0001 0101 1001 |
| * and a packet with source port: |
| * 0000 0001 1010 1001 |
| * first and second groups match, but the third doesn't. We conclude that the |
| * packet doesn't match the given entry. |
| * |
| * Translate the set to a sequence of lookup tables, one per field. Each table |
| * has two dimensions: bit groups to be matched for a single packet field, and |
| * all the possible values of said groups (buckets). Input entries are |
| * represented as one or more rules, depending on the number of composing |
| * netmasks for the given field specifier, and a group match is indicated as a |
| * set bit, with number corresponding to the rule index, in all the buckets |
| * whose value matches the entry for a given group. |
| * |
| * Rules are mapped between fields through an array of x, n pairs, with each |
| * item mapping a matched rule to one or more rules. The position of the pair in |
| * the array indicates the matched rule to be mapped to the next field, x |
| * indicates the first rule index in the next field, and n the amount of |
| * next-field rules the current rule maps to. |
| * |
| * The mapping array for the last field maps to the desired references. |
| * |
| * To match, we perform table lookups using the values of grouped packet bits, |
| * and use a sequence of bitwise operations to progressively evaluate rule |
| * matching. |
| * |
| * A stand-alone, reference implementation, also including notes about possible |
| * future optimisations, is available at: |
| * https://pipapo.lameexcu.se/ |
| * |
| * Insertion |
| * --------- |
| * |
| * - For each packet field: |
| * |
| * - divide the b packet bits we want to classify into groups of size t, |
| * obtaining ceil(b / t) groups |
| * |
| * Example: match on destination IP address, with t = 4: 32 bits, 8 groups |
| * of 4 bits each |
| * |
| * - allocate a lookup table with one column ("bucket") for each possible |
| * value of a group, and with one row for each group |
| * |
| * Example: 8 groups, 2^4 buckets: |
| * |
| * :: |
| * |
| * bucket |
| * group 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |
| * 0 |
| * 1 |
| * 2 |
| * 3 |
| * 4 |
| * 5 |
| * 6 |
| * 7 |
| * |
| * - map the bits we want to classify for the current field, for a given |
| * entry, to a single rule for non-ranged and netmask set items, and to one |
| * or multiple rules for ranges. Ranges are expanded to composing netmasks |
| * by pipapo_expand(). |
| * |
| * Example: 2 entries, 10.0.0.5:1024 and 192.168.1.0-192.168.2.1:2048 |
| * - rule #0: 10.0.0.5 |
| * - rule #1: 192.168.1.0/24 |
| * - rule #2: 192.168.2.0/31 |
| * |
| * - insert references to the rules in the lookup table, selecting buckets |
| * according to bit values of a rule in the given group. This is done by |
| * pipapo_insert(). |
| * |
| * Example: given: |
| * - rule #0: 10.0.0.5 mapping to buckets |
| * < 0 10 0 0 0 0 0 5 > |
| * - rule #1: 192.168.1.0/24 mapping to buckets |
| * < 12 0 10 8 0 1 < 0..15 > < 0..15 > > |
| * - rule #2: 192.168.2.0/31 mapping to buckets |
| * < 12 0 10 8 0 2 0 < 0..1 > > |
| * |
| * these bits are set in the lookup table: |
| * |
| * :: |
| * |
| * bucket |
| * group 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |
| * 0 0 1,2 |
| * 1 1,2 0 |
| * 2 0 1,2 |
| * 3 0 1,2 |
| * 4 0,1,2 |
| * 5 0 1 2 |
| * 6 0,1,2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 |
| * 7 1,2 1,2 1 1 1 0,1 1 1 1 1 1 1 1 1 1 1 |
| * |
| * - if this is not the last field in the set, fill a mapping array that maps |
| * rules from the lookup table to rules belonging to the same entry in |
| * the next lookup table, done by pipapo_map(). |
| * |
| * Note that as rules map to contiguous ranges of rules, given how netmask |
| * expansion and insertion is performed, &union nft_pipapo_map_bucket stores |
| * this information as pairs of first rule index, rule count. |
| * |
| * Example: 2 entries, 10.0.0.5:1024 and 192.168.1.0-192.168.2.1:2048, |
| * given lookup table #0 for field 0 (see example above): |
| * |
| * :: |
| * |
| * bucket |
| * group 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |
| * 0 0 1,2 |
| * 1 1,2 0 |
| * 2 0 1,2 |
| * 3 0 1,2 |
| * 4 0,1,2 |
| * 5 0 1 2 |
| * 6 0,1,2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 |
| * 7 1,2 1,2 1 1 1 0,1 1 1 1 1 1 1 1 1 1 1 |
| * |
| * and lookup table #1 for field 1 with: |
| * - rule #0: 1024 mapping to buckets |
| * < 0 0 4 0 > |
| * - rule #1: 2048 mapping to buckets |
| * < 0 0 5 0 > |
| * |
| * :: |
| * |
| * bucket |
| * group 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |
| * 0 0,1 |
| * 1 0,1 |
| * 2 0 1 |
| * 3 0,1 |
| * |
| * we need to map rules for 10.0.0.5 in lookup table #0 (rule #0) to 1024 |
| * in lookup table #1 (rule #0) and rules for 192.168.1.0-192.168.2.1 |
| * (rules #1, #2) to 2048 in lookup table #2 (rule #1): |
| * |
| * :: |
| * |
| * rule indices in current field: 0 1 2 |
| * map to rules in next field: 0 1 1 |
| * |
| * - if this is the last field in the set, fill a mapping array that maps |
| * rules from the last lookup table to element pointers, also done by |
| * pipapo_map(). |
| * |
| * Note that, in this implementation, we have two elements (start, end) for |
| * each entry. The pointer to the end element is stored in this array, and |
| * the pointer to the start element is linked from it. |
| * |
| * Example: entry 10.0.0.5:1024 has a corresponding &struct nft_pipapo_elem |
| * pointer, 0x66, and element for 192.168.1.0-192.168.2.1:2048 is at 0x42. |
| * From the rules of lookup table #1 as mapped above: |
| * |
| * :: |
| * |
| * rule indices in last field: 0 1 |
| * map to elements: 0x66 0x42 |
| * |
| * |
| * Matching |
| * -------- |
| * |
| * We use a result bitmap, with the size of a single lookup table bucket, to |
| * represent the matching state that applies at every algorithm step. This is |
| * done by pipapo_lookup(). |
| * |
| * - For each packet field: |
| * |
| * - start with an all-ones result bitmap (res_map in pipapo_lookup()) |
| * |
| * - perform a lookup into the table corresponding to the current field, |
| * for each group, and at every group, AND the current result bitmap with |
| * the value from the lookup table bucket |
| * |
| * :: |
| * |
| * Example: 192.168.1.5 < 12 0 10 8 0 1 0 5 >, with lookup table from |
| * insertion examples. |
| * Lookup table buckets are at least 3 bits wide, we'll assume 8 bits for |
| * convenience in this example. Initial result bitmap is 0xff, the steps |
| * below show the value of the result bitmap after each group is processed: |
| * |
| * bucket |
| * group 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |
| * 0 0 1,2 |
| * result bitmap is now: 0xff & 0x6 [bucket 12] = 0x6 |
| * |
| * 1 1,2 0 |
| * result bitmap is now: 0x6 & 0x6 [bucket 0] = 0x6 |
| * |
| * 2 0 1,2 |
| * result bitmap is now: 0x6 & 0x6 [bucket 10] = 0x6 |
| * |
| * 3 0 1,2 |
| * result bitmap is now: 0x6 & 0x6 [bucket 8] = 0x6 |
| * |
| * 4 0,1,2 |
| * result bitmap is now: 0x6 & 0x7 [bucket 0] = 0x6 |
| * |
| * 5 0 1 2 |
| * result bitmap is now: 0x6 & 0x2 [bucket 1] = 0x2 |
| * |
| * 6 0,1,2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 |
| * result bitmap is now: 0x2 & 0x7 [bucket 0] = 0x2 |
| * |
| * 7 1,2 1,2 1 1 1 0,1 1 1 1 1 1 1 1 1 1 1 |
| * final result bitmap for this field is: 0x2 & 0x3 [bucket 5] = 0x2 |
| * |
| * - at the next field, start with a new, all-zeroes result bitmap. For each |
| * bit set in the previous result bitmap, fill the new result bitmap |
| * (fill_map in pipapo_lookup()) with the rule indices from the |
| * corresponding buckets of the mapping field for this field, done by |
| * pipapo_refill() |
| * |
| * Example: with mapping table from insertion examples, with the current |
| * result bitmap from the previous example, 0x02: |
| * |
| * :: |
| * |
| * rule indices in current field: 0 1 2 |
| * map to rules in next field: 0 1 1 |
| * |
| * the new result bitmap will be 0x02: rule 1 was set, and rule 1 will be |
| * set. |
| * |
| * We can now extend this example to cover the second iteration of the step |
| * above (lookup and AND bitmap): assuming the port field is |
| * 2048 < 0 0 5 0 >, with starting result bitmap 0x2, and lookup table |
| * for "port" field from pre-computation example: |
| * |
| * :: |
| * |
| * bucket |
| * group 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |
| * 0 0,1 |
| * 1 0,1 |
| * 2 0 1 |
| * 3 0,1 |
| * |
| * operations are: 0x2 & 0x3 [bucket 0] & 0x3 [bucket 0] & 0x2 [bucket 5] |
| * & 0x3 [bucket 0], resulting bitmap is 0x2. |
| * |
| * - if this is the last field in the set, look up the value from the mapping |
| * array corresponding to the final result bitmap |
| * |
| * Example: 0x2 resulting bitmap from 192.168.1.5:2048, mapping array for |
| * last field from insertion example: |
| * |
| * :: |
| * |
| * rule indices in last field: 0 1 |
| * map to elements: 0x66 0x42 |
| * |
| * the matching element is at 0x42. |
| * |
| * |
| * References |
| * ---------- |
| * |
| * [Ligatti 2010] |
| * A Packet-classification Algorithm for Arbitrary Bitmask Rules, with |
| * Automatic Time-space Tradeoffs |
| * Jay Ligatti, Josh Kuhn, and Chris Gage. |
| * Proceedings of the IEEE International Conference on Computer |
| * Communication Networks (ICCCN), August 2010. |
| * https://www.cse.usf.edu/~ligatti/papers/grouper-conf.pdf |
| * |
| * [Rottenstreich 2010] |
| * Worst-Case TCAM Rule Expansion |
| * Ori Rottenstreich and Isaac Keslassy. |
| * 2010 Proceedings IEEE INFOCOM, San Diego, CA, 2010. |
| * http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.212.4592&rep=rep1&type=pdf |
| * |
| * [Kogan 2014] |
| * SAX-PAC (Scalable And eXpressive PAcket Classification) |
| * Kirill Kogan, Sergey Nikolenko, Ori Rottenstreich, William Culhane, |
| * and Patrick Eugster. |
| * Proceedings of the 2014 ACM conference on SIGCOMM, August 2014. |
| * https://www.sigcomm.org/sites/default/files/ccr/papers/2014/August/2619239-2626294.pdf |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/netlink.h> |
| #include <linux/netfilter.h> |
| #include <linux/netfilter/nf_tables.h> |
| #include <net/netfilter/nf_tables_core.h> |
| #include <uapi/linux/netfilter/nf_tables.h> |
| #include <linux/bitmap.h> |
| #include <linux/bitops.h> |
| |
| #include "nft_set_pipapo_avx2.h" |
| #include "nft_set_pipapo.h" |
| |
| /* Current working bitmap index, toggled between field matches */ |
| static DEFINE_PER_CPU(bool, nft_pipapo_scratch_index); |
| |
| /** |
| * pipapo_refill() - For each set bit, set bits from selected mapping table item |
| * @map: Bitmap to be scanned for set bits |
| * @len: Length of bitmap in longs |
| * @rules: Number of rules in field |
| * @dst: Destination bitmap |
| * @mt: Mapping table containing bit set specifiers |
| * @match_only: Find a single bit and return, don't fill |
| * |
| * Iteration over set bits with __builtin_ctzl(): Daniel Lemire, public domain. |
| * |
| * For each bit set in map, select the bucket from mapping table with index |
| * corresponding to the position of the bit set. Use start bit and amount of |
| * bits specified in bucket to fill region in dst. |
| * |
| * Return: -1 on no match, bit position on 'match_only', 0 otherwise. |
| */ |
| int pipapo_refill(unsigned long *map, int len, int rules, unsigned long *dst, |
| union nft_pipapo_map_bucket *mt, bool match_only) |
| { |
| unsigned long bitset; |
| int k, ret = -1; |
| |
| for (k = 0; k < len; k++) { |
| bitset = map[k]; |
| while (bitset) { |
| unsigned long t = bitset & -bitset; |
| int r = __builtin_ctzl(bitset); |
| int i = k * BITS_PER_LONG + r; |
| |
| if (unlikely(i >= rules)) { |
| map[k] = 0; |
| return -1; |
| } |
| |
| if (match_only) { |
| bitmap_clear(map, i, 1); |
| return i; |
| } |
| |
| ret = 0; |
| |
| bitmap_set(dst, mt[i].to, mt[i].n); |
| |
| bitset ^= t; |
| } |
| map[k] = 0; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * nft_pipapo_lookup() - Lookup function |
| * @net: Network namespace |
| * @set: nftables API set representation |
| * @key: nftables API element representation containing key data |
| * @ext: nftables API extension pointer, filled with matching reference |
| * |
| * For more details, see DOC: Theory of Operation. |
| * |
| * Return: true on match, false otherwise. |
| */ |
| bool nft_pipapo_lookup(const struct net *net, const struct nft_set *set, |
| const u32 *key, const struct nft_set_ext **ext) |
| { |
| struct nft_pipapo *priv = nft_set_priv(set); |
| unsigned long *res_map, *fill_map; |
| u8 genmask = nft_genmask_cur(net); |
| const u8 *rp = (const u8 *)key; |
| struct nft_pipapo_match *m; |
| struct nft_pipapo_field *f; |
| bool map_index; |
| int i; |
| |
| local_bh_disable(); |
| |
| map_index = raw_cpu_read(nft_pipapo_scratch_index); |
| |
| m = rcu_dereference(priv->match); |
| |
| if (unlikely(!m || !*raw_cpu_ptr(m->scratch))) |
| goto out; |
| |
| res_map = *raw_cpu_ptr(m->scratch) + (map_index ? m->bsize_max : 0); |
| fill_map = *raw_cpu_ptr(m->scratch) + (map_index ? 0 : m->bsize_max); |
| |
| memset(res_map, 0xff, m->bsize_max * sizeof(*res_map)); |
| |
| nft_pipapo_for_each_field(f, i, m) { |
| bool last = i == m->field_count - 1; |
| int b; |
| |
| /* For each bit group: select lookup table bucket depending on |
| * packet bytes value, then AND bucket value |
| */ |
| if (likely(f->bb == 8)) |
| pipapo_and_field_buckets_8bit(f, res_map, rp); |
| else |
| pipapo_and_field_buckets_4bit(f, res_map, rp); |
| NFT_PIPAPO_GROUP_BITS_ARE_8_OR_4; |
| |
| rp += f->groups / NFT_PIPAPO_GROUPS_PER_BYTE(f); |
| |
| /* Now populate the bitmap for the next field, unless this is |
| * the last field, in which case return the matched 'ext' |
| * pointer if any. |
| * |
| * Now res_map contains the matching bitmap, and fill_map is the |
| * bitmap for the next field. |
| */ |
| next_match: |
| b = pipapo_refill(res_map, f->bsize, f->rules, fill_map, f->mt, |
| last); |
| if (b < 0) { |
| raw_cpu_write(nft_pipapo_scratch_index, map_index); |
| local_bh_enable(); |
| |
| return false; |
| } |
| |
| if (last) { |
| *ext = &f->mt[b].e->ext; |
| if (unlikely(nft_set_elem_expired(*ext) || |
| !nft_set_elem_active(*ext, genmask))) |
| goto next_match; |
| |
| /* Last field: we're just returning the key without |
| * filling the initial bitmap for the next field, so the |
| * current inactive bitmap is clean and can be reused as |
| * *next* bitmap (not initial) for the next packet. |
| */ |
| raw_cpu_write(nft_pipapo_scratch_index, map_index); |
| local_bh_enable(); |
| |
| return true; |
| } |
| |
| /* Swap bitmap indices: res_map is the initial bitmap for the |
| * next field, and fill_map is guaranteed to be all-zeroes at |
| * this point. |
| */ |
| map_index = !map_index; |
| swap(res_map, fill_map); |
| |
| rp += NFT_PIPAPO_GROUPS_PADDING(f); |
| } |
| |
| out: |
| local_bh_enable(); |
| return false; |
| } |
| |
| /** |
| * pipapo_get() - Get matching element reference given key data |
| * @net: Network namespace |
| * @set: nftables API set representation |
| * @data: Key data to be matched against existing elements |
| * @genmask: If set, check that element is active in given genmask |
| * |
| * This is essentially the same as the lookup function, except that it matches |
| * key data against the uncommitted copy and doesn't use preallocated maps for |
| * bitmap results. |
| * |
| * Return: pointer to &struct nft_pipapo_elem on match, error pointer otherwise. |
| */ |
| static struct nft_pipapo_elem *pipapo_get(const struct net *net, |
| const struct nft_set *set, |
| const u8 *data, u8 genmask) |
| { |
| struct nft_pipapo_elem *ret = ERR_PTR(-ENOENT); |
| struct nft_pipapo *priv = nft_set_priv(set); |
| struct nft_pipapo_match *m = priv->clone; |
| unsigned long *res_map, *fill_map = NULL; |
| struct nft_pipapo_field *f; |
| int i; |
| |
| res_map = kmalloc_array(m->bsize_max, sizeof(*res_map), GFP_ATOMIC); |
| if (!res_map) { |
| ret = ERR_PTR(-ENOMEM); |
| goto out; |
| } |
| |
| fill_map = kcalloc(m->bsize_max, sizeof(*res_map), GFP_ATOMIC); |
| if (!fill_map) { |
| ret = ERR_PTR(-ENOMEM); |
| goto out; |
| } |
| |
| memset(res_map, 0xff, m->bsize_max * sizeof(*res_map)); |
| |
| nft_pipapo_for_each_field(f, i, m) { |
| bool last = i == m->field_count - 1; |
| int b; |
| |
| /* For each bit group: select lookup table bucket depending on |
| * packet bytes value, then AND bucket value |
| */ |
| if (f->bb == 8) |
| pipapo_and_field_buckets_8bit(f, res_map, data); |
| else if (f->bb == 4) |
| pipapo_and_field_buckets_4bit(f, res_map, data); |
| else |
| BUG(); |
| |
| data += f->groups / NFT_PIPAPO_GROUPS_PER_BYTE(f); |
| |
| /* Now populate the bitmap for the next field, unless this is |
| * the last field, in which case return the matched 'ext' |
| * pointer if any. |
| * |
| * Now res_map contains the matching bitmap, and fill_map is the |
| * bitmap for the next field. |
| */ |
| next_match: |
| b = pipapo_refill(res_map, f->bsize, f->rules, fill_map, f->mt, |
| last); |
| if (b < 0) |
| goto out; |
| |
| if (last) { |
| if (nft_set_elem_expired(&f->mt[b].e->ext) || |
| (genmask && |
| !nft_set_elem_active(&f->mt[b].e->ext, genmask))) |
| goto next_match; |
| |
| ret = f->mt[b].e; |
| goto out; |
| } |
| |
| data += NFT_PIPAPO_GROUPS_PADDING(f); |
| |
| /* Swap bitmap indices: fill_map will be the initial bitmap for |
| * the next field (i.e. the new res_map), and res_map is |
| * guaranteed to be all-zeroes at this point, ready to be filled |
| * according to the next mapping table. |
| */ |
| swap(res_map, fill_map); |
| } |
| |
| out: |
| kfree(fill_map); |
| kfree(res_map); |
| return ret; |
| } |
| |
| /** |
| * nft_pipapo_get() - Get matching element reference given key data |
| * @net: Network namespace |
| * @set: nftables API set representation |
| * @elem: nftables API element representation containing key data |
| * @flags: Unused |
| */ |
| static void *nft_pipapo_get(const struct net *net, const struct nft_set *set, |
| const struct nft_set_elem *elem, unsigned int flags) |
| { |
| return pipapo_get(net, set, (const u8 *)elem->key.val.data, |
| nft_genmask_cur(net)); |
| } |
| |
| /** |
| * pipapo_resize() - Resize lookup or mapping table, or both |
| * @f: Field containing lookup and mapping tables |
| * @old_rules: Previous amount of rules in field |
| * @rules: New amount of rules |
| * |
| * Increase, decrease or maintain tables size depending on new amount of rules, |
| * and copy data over. In case the new size is smaller, throw away data for |
| * highest-numbered rules. |
| * |
| * Return: 0 on success, -ENOMEM on allocation failure. |
| */ |
| static int pipapo_resize(struct nft_pipapo_field *f, int old_rules, int rules) |
| { |
| long *new_lt = NULL, *new_p, *old_lt = f->lt, *old_p; |
| union nft_pipapo_map_bucket *new_mt, *old_mt = f->mt; |
| size_t new_bucket_size, copy; |
| int group, bucket; |
| |
| new_bucket_size = DIV_ROUND_UP(rules, BITS_PER_LONG); |
| #ifdef NFT_PIPAPO_ALIGN |
| new_bucket_size = roundup(new_bucket_size, |
| NFT_PIPAPO_ALIGN / sizeof(*new_lt)); |
| #endif |
| |
| if (new_bucket_size == f->bsize) |
| goto mt; |
| |
| if (new_bucket_size > f->bsize) |
| copy = f->bsize; |
| else |
| copy = new_bucket_size; |
| |
| new_lt = kvzalloc(f->groups * NFT_PIPAPO_BUCKETS(f->bb) * |
| new_bucket_size * sizeof(*new_lt) + |
| NFT_PIPAPO_ALIGN_HEADROOM, |
| GFP_KERNEL); |
| if (!new_lt) |
| return -ENOMEM; |
| |
| new_p = NFT_PIPAPO_LT_ALIGN(new_lt); |
| old_p = NFT_PIPAPO_LT_ALIGN(old_lt); |
| |
| for (group = 0; group < f->groups; group++) { |
| for (bucket = 0; bucket < NFT_PIPAPO_BUCKETS(f->bb); bucket++) { |
| memcpy(new_p, old_p, copy * sizeof(*new_p)); |
| new_p += copy; |
| old_p += copy; |
| |
| if (new_bucket_size > f->bsize) |
| new_p += new_bucket_size - f->bsize; |
| else |
| old_p += f->bsize - new_bucket_size; |
| } |
| } |
| |
| mt: |
| new_mt = kvmalloc(rules * sizeof(*new_mt), GFP_KERNEL); |
| if (!new_mt) { |
| kvfree(new_lt); |
| return -ENOMEM; |
| } |
| |
| memcpy(new_mt, f->mt, min(old_rules, rules) * sizeof(*new_mt)); |
| if (rules > old_rules) { |
| memset(new_mt + old_rules, 0, |
| (rules - old_rules) * sizeof(*new_mt)); |
| } |
| |
| if (new_lt) { |
| f->bsize = new_bucket_size; |
| NFT_PIPAPO_LT_ASSIGN(f, new_lt); |
| kvfree(old_lt); |
| } |
| |
| f->mt = new_mt; |
| kvfree(old_mt); |
| |
| return 0; |
| } |
| |
| /** |
| * pipapo_bucket_set() - Set rule bit in bucket given group and group value |
| * @f: Field containing lookup table |
| * @rule: Rule index |
| * @group: Group index |
| * @v: Value of bit group |
| */ |
| static void pipapo_bucket_set(struct nft_pipapo_field *f, int rule, int group, |
| int v) |
| { |
| unsigned long *pos; |
| |
| pos = NFT_PIPAPO_LT_ALIGN(f->lt); |
| pos += f->bsize * NFT_PIPAPO_BUCKETS(f->bb) * group; |
| pos += f->bsize * v; |
| |
| __set_bit(rule, pos); |
| } |
| |
| /** |
| * pipapo_lt_4b_to_8b() - Switch lookup table group width from 4 bits to 8 bits |
| * @old_groups: Number of current groups |
| * @bsize: Size of one bucket, in longs |
| * @old_lt: Pointer to the current lookup table |
| * @new_lt: Pointer to the new, pre-allocated lookup table |
| * |
| * Each bucket with index b in the new lookup table, belonging to group g, is |
| * filled with the bit intersection between: |
| * - bucket with index given by the upper 4 bits of b, from group g, and |
| * - bucket with index given by the lower 4 bits of b, from group g + 1 |
| * |
| * That is, given buckets from the new lookup table N(x, y) and the old lookup |
| * table O(x, y), with x bucket index, and y group index: |
| * |
| * N(b, g) := O(b / 16, g) & O(b % 16, g + 1) |
| * |
| * This ensures equivalence of the matching results on lookup. Two examples in |
| * pictures: |
| * |
| * bucket |
| * group 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 ... 254 255 |
| * 0 ^ |
| * 1 | ^ |
| * ... ( & ) | |
| * / \ | |
| * / \ .-( & )-. |
| * / bucket \ | | |
| * group 0 / 1 2 3 \ 4 5 6 7 8 9 10 11 12 13 |14 15 | |
| * 0 / \ | | |
| * 1 \ | | |
| * 2 | --' |
| * 3 '- |
| * ... |
| */ |
| static void pipapo_lt_4b_to_8b(int old_groups, int bsize, |
| unsigned long *old_lt, unsigned long *new_lt) |
| { |
| int g, b, i; |
| |
| for (g = 0; g < old_groups / 2; g++) { |
| int src_g0 = g * 2, src_g1 = g * 2 + 1; |
| |
| for (b = 0; b < NFT_PIPAPO_BUCKETS(8); b++) { |
| int src_b0 = b / NFT_PIPAPO_BUCKETS(4); |
| int src_b1 = b % NFT_PIPAPO_BUCKETS(4); |
| int src_i0 = src_g0 * NFT_PIPAPO_BUCKETS(4) + src_b0; |
| int src_i1 = src_g1 * NFT_PIPAPO_BUCKETS(4) + src_b1; |
| |
| for (i = 0; i < bsize; i++) { |
| *new_lt = old_lt[src_i0 * bsize + i] & |
| old_lt[src_i1 * bsize + i]; |
| new_lt++; |
| } |
| } |
| } |
| } |
| |
| /** |
| * pipapo_lt_8b_to_4b() - Switch lookup table group width from 8 bits to 4 bits |
| * @old_groups: Number of current groups |
| * @bsize: Size of one bucket, in longs |
| * @old_lt: Pointer to the current lookup table |
| * @new_lt: Pointer to the new, pre-allocated lookup table |
| * |
| * Each bucket with index b in the new lookup table, belonging to group g, is |
| * filled with the bit union of: |
| * - all the buckets with index such that the upper four bits of the lower byte |
| * equal b, from group g, with g odd |
| * - all the buckets with index such that the lower four bits equal b, from |
| * group g, with g even |
| * |
| * That is, given buckets from the new lookup table N(x, y) and the old lookup |
| * table O(x, y), with x bucket index, and y group index: |
| * |
| * - with g odd: N(b, g) := U(O(x, g) for each x : x = (b & 0xf0) >> 4) |
| * - with g even: N(b, g) := U(O(x, g) for each x : x = b & 0x0f) |
| * |
| * where U() denotes the arbitrary union operation (binary OR of n terms). This |
| * ensures equivalence of the matching results on lookup. |
| */ |
| static void pipapo_lt_8b_to_4b(int old_groups, int bsize, |
| unsigned long *old_lt, unsigned long *new_lt) |
| { |
| int g, b, bsrc, i; |
| |
| memset(new_lt, 0, old_groups * 2 * NFT_PIPAPO_BUCKETS(4) * bsize * |
| sizeof(unsigned long)); |
| |
| for (g = 0; g < old_groups * 2; g += 2) { |
| int src_g = g / 2; |
| |
| for (b = 0; b < NFT_PIPAPO_BUCKETS(4); b++) { |
| for (bsrc = NFT_PIPAPO_BUCKETS(8) * src_g; |
| bsrc < NFT_PIPAPO_BUCKETS(8) * (src_g + 1); |
| bsrc++) { |
| if (((bsrc & 0xf0) >> 4) != b) |
| continue; |
| |
| for (i = 0; i < bsize; i++) |
| new_lt[i] |= old_lt[bsrc * bsize + i]; |
| } |
| |
| new_lt += bsize; |
| } |
| |
| for (b = 0; b < NFT_PIPAPO_BUCKETS(4); b++) { |
| for (bsrc = NFT_PIPAPO_BUCKETS(8) * src_g; |
| bsrc < NFT_PIPAPO_BUCKETS(8) * (src_g + 1); |
| bsrc++) { |
| if ((bsrc & 0x0f) != b) |
| continue; |
| |
| for (i = 0; i < bsize; i++) |
| new_lt[i] |= old_lt[bsrc * bsize + i]; |
| } |
| |
| new_lt += bsize; |
| } |
| } |
| } |
| |
| /** |
| * pipapo_lt_bits_adjust() - Adjust group size for lookup table if needed |
| * @f: Field containing lookup table |
| */ |
| static void pipapo_lt_bits_adjust(struct nft_pipapo_field *f) |
| { |
| unsigned long *new_lt; |
| int groups, bb; |
| size_t lt_size; |
| |
| lt_size = f->groups * NFT_PIPAPO_BUCKETS(f->bb) * f->bsize * |
| sizeof(*f->lt); |
| |
| if (f->bb == NFT_PIPAPO_GROUP_BITS_SMALL_SET && |
| lt_size > NFT_PIPAPO_LT_SIZE_HIGH) { |
| groups = f->groups * 2; |
| bb = NFT_PIPAPO_GROUP_BITS_LARGE_SET; |
| |
| lt_size = groups * NFT_PIPAPO_BUCKETS(bb) * f->bsize * |
| sizeof(*f->lt); |
| } else if (f->bb == NFT_PIPAPO_GROUP_BITS_LARGE_SET && |
| lt_size < NFT_PIPAPO_LT_SIZE_LOW) { |
| groups = f->groups / 2; |
| bb = NFT_PIPAPO_GROUP_BITS_SMALL_SET; |
| |
| lt_size = groups * NFT_PIPAPO_BUCKETS(bb) * f->bsize * |
| sizeof(*f->lt); |
| |
| /* Don't increase group width if the resulting lookup table size |
| * would exceed the upper size threshold for a "small" set. |
| */ |
| if (lt_size > NFT_PIPAPO_LT_SIZE_HIGH) |
| return; |
| } else { |
| return; |
| } |
| |
| new_lt = kvzalloc(lt_size + NFT_PIPAPO_ALIGN_HEADROOM, GFP_KERNEL); |
| if (!new_lt) |
| return; |
| |
| NFT_PIPAPO_GROUP_BITS_ARE_8_OR_4; |
| if (f->bb == 4 && bb == 8) { |
| pipapo_lt_4b_to_8b(f->groups, f->bsize, |
| NFT_PIPAPO_LT_ALIGN(f->lt), |
| NFT_PIPAPO_LT_ALIGN(new_lt)); |
| } else if (f->bb == 8 && bb == 4) { |
| pipapo_lt_8b_to_4b(f->groups, f->bsize, |
| NFT_PIPAPO_LT_ALIGN(f->lt), |
| NFT_PIPAPO_LT_ALIGN(new_lt)); |
| } else { |
| BUG(); |
| } |
| |
| f->groups = groups; |
| f->bb = bb; |
| kvfree(f->lt); |
| NFT_PIPAPO_LT_ASSIGN(f, new_lt); |
| } |
| |
| /** |
| * pipapo_insert() - Insert new rule in field given input key and mask length |
| * @f: Field containing lookup table |
| * @k: Input key for classification, without nftables padding |
| * @mask_bits: Length of mask; matches field length for non-ranged entry |
| * |
| * Insert a new rule reference in lookup buckets corresponding to k and |
| * mask_bits. |
| * |
| * Return: 1 on success (one rule inserted), negative error code on failure. |
| */ |
| static int pipapo_insert(struct nft_pipapo_field *f, const uint8_t *k, |
| int mask_bits) |
| { |
| int rule = f->rules++, group, ret, bit_offset = 0; |
| |
| ret = pipapo_resize(f, f->rules - 1, f->rules); |
| if (ret) |
| return ret; |
| |
| for (group = 0; group < f->groups; group++) { |
| int i, v; |
| u8 mask; |
| |
| v = k[group / (BITS_PER_BYTE / f->bb)]; |
| v &= GENMASK(BITS_PER_BYTE - bit_offset - 1, 0); |
| v >>= (BITS_PER_BYTE - bit_offset) - f->bb; |
| |
| bit_offset += f->bb; |
| bit_offset %= BITS_PER_BYTE; |
| |
| if (mask_bits >= (group + 1) * f->bb) { |
| /* Not masked */ |
| pipapo_bucket_set(f, rule, group, v); |
| } else if (mask_bits <= group * f->bb) { |
| /* Completely masked */ |
| for (i = 0; i < NFT_PIPAPO_BUCKETS(f->bb); i++) |
| pipapo_bucket_set(f, rule, group, i); |
| } else { |
| /* The mask limit falls on this group */ |
| mask = GENMASK(f->bb - 1, 0); |
| mask >>= mask_bits - group * f->bb; |
| for (i = 0; i < NFT_PIPAPO_BUCKETS(f->bb); i++) { |
| if ((i & ~mask) == (v & ~mask)) |
| pipapo_bucket_set(f, rule, group, i); |
| } |
| } |
| } |
| |
| pipapo_lt_bits_adjust(f); |
| |
| return 1; |
| } |
| |
| /** |
| * pipapo_step_diff() - Check if setting @step bit in netmask would change it |
| * @base: Mask we are expanding |
| * @step: Step bit for given expansion step |
| * @len: Total length of mask space (set and unset bits), bytes |
| * |
| * Convenience function for mask expansion. |
| * |
| * Return: true if step bit changes mask (i.e. isn't set), false otherwise. |
| */ |
| static bool pipapo_step_diff(u8 *base, int step, int len) |
| { |
| /* Network order, byte-addressed */ |
| #ifdef __BIG_ENDIAN__ |
| return !(BIT(step % BITS_PER_BYTE) & base[step / BITS_PER_BYTE]); |
| #else |
| return !(BIT(step % BITS_PER_BYTE) & |
| base[len - 1 - step / BITS_PER_BYTE]); |
| #endif |
| } |
| |
| /** |
| * pipapo_step_after_end() - Check if mask exceeds range end with given step |
| * @base: Mask we are expanding |
| * @end: End of range |
| * @step: Step bit for given expansion step, highest bit to be set |
| * @len: Total length of mask space (set and unset bits), bytes |
| * |
| * Convenience function for mask expansion. |
| * |
| * Return: true if mask exceeds range setting step bits, false otherwise. |
| */ |
| static bool pipapo_step_after_end(const u8 *base, const u8 *end, int step, |
| int len) |
| { |
| u8 tmp[NFT_PIPAPO_MAX_BYTES]; |
| int i; |
| |
| memcpy(tmp, base, len); |
| |
| /* Network order, byte-addressed */ |
| for (i = 0; i <= step; i++) |
| #ifdef __BIG_ENDIAN__ |
| tmp[i / BITS_PER_BYTE] |= BIT(i % BITS_PER_BYTE); |
| #else |
| tmp[len - 1 - i / BITS_PER_BYTE] |= BIT(i % BITS_PER_BYTE); |
| #endif |
| |
| return memcmp(tmp, end, len) > 0; |
| } |
| |
| /** |
| * pipapo_base_sum() - Sum step bit to given len-sized netmask base with carry |
| * @base: Netmask base |
| * @step: Step bit to sum |
| * @len: Netmask length, bytes |
| */ |
| static void pipapo_base_sum(u8 *base, int step, int len) |
| { |
| bool carry = false; |
| int i; |
| |
| /* Network order, byte-addressed */ |
| #ifdef __BIG_ENDIAN__ |
| for (i = step / BITS_PER_BYTE; i < len; i++) { |
| #else |
| for (i = len - 1 - step / BITS_PER_BYTE; i >= 0; i--) { |
| #endif |
| if (carry) |
| base[i]++; |
| else |
| base[i] += 1 << (step % BITS_PER_BYTE); |
| |
| if (base[i]) |
| break; |
| |
| carry = true; |
| } |
| } |
| |
| /** |
| * pipapo_expand() - Expand to composing netmasks, insert into lookup table |
| * @f: Field containing lookup table |
| * @start: Start of range |
| * @end: End of range |
| * @len: Length of value in bits |
| * |
| * Expand range to composing netmasks and insert corresponding rule references |
| * in lookup buckets. |
| * |
| * Return: number of inserted rules on success, negative error code on failure. |
| */ |
| static int pipapo_expand(struct nft_pipapo_field *f, |
| const u8 *start, const u8 *end, int len) |
| { |
| int step, masks = 0, bytes = DIV_ROUND_UP(len, BITS_PER_BYTE); |
| u8 base[NFT_PIPAPO_MAX_BYTES]; |
| |
| memcpy(base, start, bytes); |
| while (memcmp(base, end, bytes) <= 0) { |
| int err; |
| |
| step = 0; |
| while (pipapo_step_diff(base, step, bytes)) { |
| if (pipapo_step_after_end(base, end, step, bytes)) |
| break; |
| |
| step++; |
| if (step >= len) { |
| if (!masks) { |
| pipapo_insert(f, base, 0); |
| masks = 1; |
| } |
| goto out; |
| } |
| } |
| |
| err = pipapo_insert(f, base, len - step); |
| |
| if (err < 0) |
| return err; |
| |
| masks++; |
| pipapo_base_sum(base, step, bytes); |
| } |
| out: |
| return masks; |
| } |
| |
| /** |
| * pipapo_map() - Insert rules in mapping tables, mapping them between fields |
| * @m: Matching data, including mapping table |
| * @map: Table of rule maps: array of first rule and amount of rules |
| * in next field a given rule maps to, for each field |
| * @e: For last field, nft_set_ext pointer matching rules map to |
| */ |
| static void pipapo_map(struct nft_pipapo_match *m, |
| union nft_pipapo_map_bucket map[NFT_PIPAPO_MAX_FIELDS], |
| struct nft_pipapo_elem *e) |
| { |
| struct nft_pipapo_field *f; |
| int i, j; |
| |
| for (i = 0, f = m->f; i < m->field_count - 1; i++, f++) { |
| for (j = 0; j < map[i].n; j++) { |
| f->mt[map[i].to + j].to = map[i + 1].to; |
| f->mt[map[i].to + j].n = map[i + 1].n; |
| } |
| } |
| |
| /* Last field: map to ext instead of mapping to next field */ |
| for (j = 0; j < map[i].n; j++) |
| f->mt[map[i].to + j].e = e; |
| } |
| |
| /** |
| * pipapo_realloc_scratch() - Reallocate scratch maps for partial match results |
| * @clone: Copy of matching data with pending insertions and deletions |
| * @bsize_max: Maximum bucket size, scratch maps cover two buckets |
| * |
| * Return: 0 on success, -ENOMEM on failure. |
| */ |
| static int pipapo_realloc_scratch(struct nft_pipapo_match *clone, |
| unsigned long bsize_max) |
| { |
| int i; |
| |
| for_each_possible_cpu(i) { |
| unsigned long *scratch; |
| #ifdef NFT_PIPAPO_ALIGN |
| unsigned long *scratch_aligned; |
| #endif |
| |
| scratch = kzalloc_node(bsize_max * sizeof(*scratch) * 2 + |
| NFT_PIPAPO_ALIGN_HEADROOM, |
| GFP_KERNEL, cpu_to_node(i)); |
| if (!scratch) { |
| /* On failure, there's no need to undo previous |
| * allocations: this means that some scratch maps have |
| * a bigger allocated size now (this is only called on |
| * insertion), but the extra space won't be used by any |
| * CPU as new elements are not inserted and m->bsize_max |
| * is not updated. |
| */ |
| return -ENOMEM; |
| } |
| |
| kfree(*per_cpu_ptr(clone->scratch, i)); |
| |
| *per_cpu_ptr(clone->scratch, i) = scratch; |
| |
| #ifdef NFT_PIPAPO_ALIGN |
| scratch_aligned = NFT_PIPAPO_LT_ALIGN(scratch); |
| *per_cpu_ptr(clone->scratch_aligned, i) = scratch_aligned; |
| #endif |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * nft_pipapo_insert() - Validate and insert ranged elements |
| * @net: Network namespace |
| * @set: nftables API set representation |
| * @elem: nftables API element representation containing key data |
| * @ext2: Filled with pointer to &struct nft_set_ext in inserted element |
| * |
| * Return: 0 on success, error pointer on failure. |
| */ |
| static int nft_pipapo_insert(const struct net *net, const struct nft_set *set, |
| const struct nft_set_elem *elem, |
| struct nft_set_ext **ext2) |
| { |
| const struct nft_set_ext *ext = nft_set_elem_ext(set, elem->priv); |
| union nft_pipapo_map_bucket rulemap[NFT_PIPAPO_MAX_FIELDS]; |
| const u8 *start = (const u8 *)elem->key.val.data, *end; |
| struct nft_pipapo_elem *e = elem->priv, *dup; |
| struct nft_pipapo *priv = nft_set_priv(set); |
| struct nft_pipapo_match *m = priv->clone; |
| u8 genmask = nft_genmask_next(net); |
| struct nft_pipapo_field *f; |
| int i, bsize_max, err = 0; |
| |
| if (nft_set_ext_exists(ext, NFT_SET_EXT_KEY_END)) |
| end = (const u8 *)nft_set_ext_key_end(ext)->data; |
| else |
| end = start; |
| |
| dup = pipapo_get(net, set, start, genmask); |
| if (!IS_ERR(dup)) { |
| /* Check if we already have the same exact entry */ |
| const struct nft_data *dup_key, *dup_end; |
| |
| dup_key = nft_set_ext_key(&dup->ext); |
| if (nft_set_ext_exists(&dup->ext, NFT_SET_EXT_KEY_END)) |
| dup_end = nft_set_ext_key_end(&dup->ext); |
| else |
| dup_end = dup_key; |
| |
| if (!memcmp(start, dup_key->data, sizeof(*dup_key->data)) && |
| !memcmp(end, dup_end->data, sizeof(*dup_end->data))) { |
| *ext2 = &dup->ext; |
| return -EEXIST; |
| } |
| |
| return -ENOTEMPTY; |
| } |
| |
| if (PTR_ERR(dup) == -ENOENT) { |
| /* Look for partially overlapping entries */ |
| dup = pipapo_get(net, set, end, nft_genmask_next(net)); |
| } |
| |
| if (PTR_ERR(dup) != -ENOENT) { |
| if (IS_ERR(dup)) |
| return PTR_ERR(dup); |
| *ext2 = &dup->ext; |
| return -ENOTEMPTY; |
| } |
| |
| /* Validate */ |
| nft_pipapo_for_each_field(f, i, m) { |
| const u8 *start_p = start, *end_p = end; |
| |
| if (f->rules >= (unsigned long)NFT_PIPAPO_RULE0_MAX) |
| return -ENOSPC; |
| |
| if (memcmp(start_p, end_p, |
| f->groups / NFT_PIPAPO_GROUPS_PER_BYTE(f)) > 0) |
| return -EINVAL; |
| |
| start_p += NFT_PIPAPO_GROUPS_PADDED_SIZE(f); |
| end_p += NFT_PIPAPO_GROUPS_PADDED_SIZE(f); |
| } |
| |
| /* Insert */ |
| priv->dirty = true; |
| |
| bsize_max = m->bsize_max; |
| |
| nft_pipapo_for_each_field(f, i, m) { |
| int ret; |
| |
| rulemap[i].to = f->rules; |
| |
| ret = memcmp(start, end, |
| f->groups / NFT_PIPAPO_GROUPS_PER_BYTE(f)); |
| if (!ret) |
| ret = pipapo_insert(f, start, f->groups * f->bb); |
| else |
| ret = pipapo_expand(f, start, end, f->groups * f->bb); |
| |
| if (f->bsize > bsize_max) |
| bsize_max = f->bsize; |
| |
| rulemap[i].n = ret; |
| |
| start += NFT_PIPAPO_GROUPS_PADDED_SIZE(f); |
| end += NFT_PIPAPO_GROUPS_PADDED_SIZE(f); |
| } |
| |
| if (!*get_cpu_ptr(m->scratch) || bsize_max > m->bsize_max) { |
| put_cpu_ptr(m->scratch); |
| |
| err = pipapo_realloc_scratch(m, bsize_max); |
| if (err) |
| return err; |
| |
| m->bsize_max = bsize_max; |
| } else { |
| put_cpu_ptr(m->scratch); |
| } |
| |
| *ext2 = &e->ext; |
| |
| pipapo_map(m, rulemap, e); |
| |
| return 0; |
| } |
| |
| /** |
| * pipapo_clone() - Clone matching data to create new working copy |
| * @old: Existing matching data |
| * |
| * Return: copy of matching data passed as 'old', error pointer on failure |
| */ |
| static struct nft_pipapo_match *pipapo_clone(struct nft_pipapo_match *old) |
| { |
| struct nft_pipapo_field *dst, *src; |
| struct nft_pipapo_match *new; |
| int i; |
| |
| new = kmalloc(sizeof(*new) + sizeof(*dst) * old->field_count, |
| GFP_KERNEL); |
| if (!new) |
| return ERR_PTR(-ENOMEM); |
| |
| new->field_count = old->field_count; |
| new->bsize_max = old->bsize_max; |
| |
| new->scratch = alloc_percpu(*new->scratch); |
| if (!new->scratch) |
| goto out_scratch; |
| |
| #ifdef NFT_PIPAPO_ALIGN |
| new->scratch_aligned = alloc_percpu(*new->scratch_aligned); |
| if (!new->scratch_aligned) |
| goto out_scratch; |
| #endif |
| |
| rcu_head_init(&new->rcu); |
| |
| src = old->f; |
| dst = new->f; |
| |
| for (i = 0; i < old->field_count; i++) { |
| unsigned long *new_lt; |
| |
| memcpy(dst, src, offsetof(struct nft_pipapo_field, lt)); |
| |
| new_lt = kvzalloc(src->groups * NFT_PIPAPO_BUCKETS(src->bb) * |
| src->bsize * sizeof(*dst->lt) + |
| NFT_PIPAPO_ALIGN_HEADROOM, |
| GFP_KERNEL); |
| if (!new_lt) |
| goto out_lt; |
| |
| NFT_PIPAPO_LT_ASSIGN(dst, new_lt); |
| |
| memcpy(NFT_PIPAPO_LT_ALIGN(new_lt), |
| NFT_PIPAPO_LT_ALIGN(src->lt), |
| src->bsize * sizeof(*dst->lt) * |
| src->groups * NFT_PIPAPO_BUCKETS(src->bb)); |
| |
| dst->mt = kvmalloc(src->rules * sizeof(*src->mt), GFP_KERNEL); |
| if (!dst->mt) |
| goto out_mt; |
| |
| memcpy(dst->mt, src->mt, src->rules * sizeof(*src->mt)); |
| src++; |
| dst++; |
| } |
| |
| return new; |
| |
| out_mt: |
| kvfree(dst->lt); |
| out_lt: |
| for (dst--; i > 0; i--) { |
| kvfree(dst->mt); |
| kvfree(dst->lt); |
| dst--; |
| } |
| #ifdef NFT_PIPAPO_ALIGN |
| free_percpu(new->scratch_aligned); |
| #endif |
| out_scratch: |
| free_percpu(new->scratch); |
| kfree(new); |
| |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| /** |
| * pipapo_rules_same_key() - Get number of rules originated from the same entry |
| * @f: Field containing mapping table |
| * @first: Index of first rule in set of rules mapping to same entry |
| * |
| * Using the fact that all rules in a field that originated from the same entry |
| * will map to the same set of rules in the next field, or to the same element |
| * reference, return the cardinality of the set of rules that originated from |
| * the same entry as the rule with index @first, @first rule included. |
| * |
| * In pictures: |
| * rules |
| * field #0 0 1 2 3 4 |
| * map to: 0 1 2-4 2-4 5-9 |
| * . . ....... . ... |
| * | | | | \ \ |
| * | | | | \ \ |
| * | | | | \ \ |
| * ' ' ' ' ' \ |
| * in field #1 0 1 2 3 4 5 ... |
| * |
| * if this is called for rule 2 on field #0, it will return 3, as also rules 2 |
| * and 3 in field 0 map to the same set of rules (2, 3, 4) in the next field. |
| * |
| * For the last field in a set, we can rely on associated entries to map to the |
| * same element references. |
| * |
| * Return: Number of rules that originated from the same entry as @first. |
| */ |
| static int pipapo_rules_same_key(struct nft_pipapo_field *f, int first) |
| { |
| struct nft_pipapo_elem *e = NULL; /* Keep gcc happy */ |
| int r; |
| |
| for (r = first; r < f->rules; r++) { |
| if (r != first && e != f->mt[r].e) |
| return r - first; |
| |
| e = f->mt[r].e; |
| } |
| |
| if (r != first) |
| return r - first; |
| |
| return 0; |
| } |
| |
| /** |
| * pipapo_unmap() - Remove rules from mapping tables, renumber remaining ones |
| * @mt: Mapping array |
| * @rules: Original amount of rules in mapping table |
| * @start: First rule index to be removed |
| * @n: Amount of rules to be removed |
| * @to_offset: First rule index, in next field, this group of rules maps to |
| * @is_last: If this is the last field, delete reference from mapping array |
| * |
| * This is used to unmap rules from the mapping table for a single field, |
| * maintaining consistency and compactness for the existing ones. |
| * |
| * In pictures: let's assume that we want to delete rules 2 and 3 from the |
| * following mapping array: |
| * |
| * rules |
| * 0 1 2 3 4 |
| * map to: 4-10 4-10 11-15 11-15 16-18 |
| * |
| * the result will be: |
| * |
| * rules |
| * 0 1 2 |
| * map to: 4-10 4-10 11-13 |
| * |
| * for fields before the last one. In case this is the mapping table for the |
| * last field in a set, and rules map to pointers to &struct nft_pipapo_elem: |
| * |
| * rules |
| * 0 1 2 3 4 |
| * element pointers: 0x42 0x42 0x33 0x33 0x44 |
| * |
| * the result will be: |
| * |
| * rules |
| * 0 1 2 |
| * element pointers: 0x42 0x42 0x44 |
| */ |
| static void pipapo_unmap(union nft_pipapo_map_bucket *mt, int rules, |
| int start, int n, int to_offset, bool is_last) |
| { |
| int i; |
| |
| memmove(mt + start, mt + start + n, (rules - start - n) * sizeof(*mt)); |
| memset(mt + rules - n, 0, n * sizeof(*mt)); |
| |
| if (is_last) |
| return; |
| |
| for (i = start; i < rules - n; i++) |
| mt[i].to -= to_offset; |
| } |
| |
| /** |
| * pipapo_drop() - Delete entry from lookup and mapping tables, given rule map |
| * @m: Matching data |
| * @rulemap: Table of rule maps, arrays of first rule and amount of rules |
| * in next field a given entry maps to, for each field |
| * |
| * For each rule in lookup table buckets mapping to this set of rules, drop |
| * all bits set in lookup table mapping. In pictures, assuming we want to drop |
| * rules 0 and 1 from this lookup table: |
| * |
| * bucket |
| * group 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |
| * 0 0 1,2 |
| * 1 1,2 0 |
| * 2 0 1,2 |
| * 3 0 1,2 |
| * 4 0,1,2 |
| * 5 0 1 2 |
| * 6 0,1,2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 |
| * 7 1,2 1,2 1 1 1 0,1 1 1 1 1 1 1 1 1 1 1 |
| * |
| * rule 2 becomes rule 0, and the result will be: |
| * |
| * bucket |
| * group 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |
| * 0 0 |
| * 1 0 |
| * 2 0 |
| * 3 0 |
| * 4 0 |
| * 5 0 |
| * 6 0 |
| * 7 0 0 |
| * |
| * once this is done, call unmap() to drop all the corresponding rule references |
| * from mapping tables. |
| */ |
| static void pipapo_drop(struct nft_pipapo_match *m, |
| union nft_pipapo_map_bucket rulemap[]) |
| { |
| struct nft_pipapo_field *f; |
| int i; |
| |
| nft_pipapo_for_each_field(f, i, m) { |
| int g; |
| |
| for (g = 0; g < f->groups; g++) { |
| unsigned long *pos; |
| int b; |
| |
| pos = NFT_PIPAPO_LT_ALIGN(f->lt) + g * |
| NFT_PIPAPO_BUCKETS(f->bb) * f->bsize; |
| |
| for (b = 0; b < NFT_PIPAPO_BUCKETS(f->bb); b++) { |
| bitmap_cut(pos, pos, rulemap[i].to, |
| rulemap[i].n, |
| f->bsize * BITS_PER_LONG); |
| |
| pos += f->bsize; |
| } |
| } |
| |
| pipapo_unmap(f->mt, f->rules, rulemap[i].to, rulemap[i].n, |
| rulemap[i + 1].n, i == m->field_count - 1); |
| if (pipapo_resize(f, f->rules, f->rules - rulemap[i].n)) { |
| /* We can ignore this, a failure to shrink tables down |
| * doesn't make tables invalid. |
| */ |
| ; |
| } |
| f->rules -= rulemap[i].n; |
| |
| pipapo_lt_bits_adjust(f); |
| } |
| } |
| |
| /** |
| * pipapo_gc() - Drop expired entries from set, destroy start and end elements |
| * @set: nftables API set representation |
| * @m: Matching data |
| */ |
| static void pipapo_gc(const struct nft_set *set, struct nft_pipapo_match *m) |
| { |
| struct nft_pipapo *priv = nft_set_priv(set); |
| int rules_f0, first_rule = 0; |
| struct nft_pipapo_elem *e; |
| |
| while ((rules_f0 = pipapo_rules_same_key(m->f, first_rule))) { |
| union nft_pipapo_map_bucket rulemap[NFT_PIPAPO_MAX_FIELDS]; |
| struct nft_pipapo_field *f; |
| int i, start, rules_fx; |
| |
| start = first_rule; |
| rules_fx = rules_f0; |
| |
| nft_pipapo_for_each_field(f, i, m) { |
| rulemap[i].to = start; |
| rulemap[i].n = rules_fx; |
| |
| if (i < m->field_count - 1) { |
| rules_fx = f->mt[start].n; |
| start = f->mt[start].to; |
| } |
| } |
| |
| /* Pick the last field, and its last index */ |
| f--; |
| i--; |
| e = f->mt[rulemap[i].to].e; |
| if (nft_set_elem_expired(&e->ext) && |
| !nft_set_elem_mark_busy(&e->ext)) { |
| priv->dirty = true; |
| pipapo_drop(m, rulemap); |
| |
| rcu_barrier(); |
| nft_set_elem_destroy(set, e, true); |
| |
| /* And check again current first rule, which is now the |
| * first we haven't checked. |
| */ |
| } else { |
| first_rule += rules_f0; |
| } |
| } |
| |
| e = nft_set_catchall_gc(set); |
| if (e) |
| nft_set_elem_destroy(set, e, true); |
| |
| priv->last_gc = jiffies; |
| } |
| |
| /** |
| * pipapo_free_fields() - Free per-field tables contained in matching data |
| * @m: Matching data |
| */ |
| static void pipapo_free_fields(struct nft_pipapo_match *m) |
| { |
| struct nft_pipapo_field *f; |
| int i; |
| |
| nft_pipapo_for_each_field(f, i, m) { |
| kvfree(f->lt); |
| kvfree(f->mt); |
| } |
| } |
| |
| /** |
| * pipapo_reclaim_match - RCU callback to free fields from old matching data |
| * @rcu: RCU head |
| */ |
| static void pipapo_reclaim_match(struct rcu_head *rcu) |
| { |
| struct nft_pipapo_match *m; |
| int i; |
| |
| m = container_of(rcu, struct nft_pipapo_match, rcu); |
| |
| for_each_possible_cpu(i) |
| kfree(*per_cpu_ptr(m->scratch, i)); |
| |
| #ifdef NFT_PIPAPO_ALIGN |
| free_percpu(m->scratch_aligned); |
| #endif |
| free_percpu(m->scratch); |
| |
| pipapo_free_fields(m); |
| |
| kfree(m); |
| } |
| |
| /** |
| * pipapo_commit() - Replace lookup data with current working copy |
| * @set: nftables API set representation |
| * |
| * While at it, check if we should perform garbage collection on the working |
| * copy before committing it for lookup, and don't replace the table if the |
| * working copy doesn't have pending changes. |
| * |
| * We also need to create a new working copy for subsequent insertions and |
| * deletions. |
| */ |
| static void pipapo_commit(const struct nft_set *set) |
| { |
| struct nft_pipapo *priv = nft_set_priv(set); |
| struct nft_pipapo_match *new_clone, *old; |
| |
| if (time_after_eq(jiffies, priv->last_gc + nft_set_gc_interval(set))) |
| pipapo_gc(set, priv->clone); |
| |
| if (!priv->dirty) |
| return; |
| |
| new_clone = pipapo_clone(priv->clone); |
| if (IS_ERR(new_clone)) |
| return; |
| |
| priv->dirty = false; |
| |
| old = rcu_access_pointer(priv->match); |
| rcu_assign_pointer(priv->match, priv->clone); |
| if (old) |
| call_rcu(&old->rcu, pipapo_reclaim_match); |
| |
| priv->clone = new_clone; |
| } |
| |
| /** |
| * nft_pipapo_activate() - Mark element reference as active given key, commit |
| * @net: Network namespace |
| * @set: nftables API set representation |
| * @elem: nftables API element representation containing key data |
| * |
| * On insertion, elements are added to a copy of the matching data currently |
| * in use for lookups, and not directly inserted into current lookup data, so |
| * we'll take care of that by calling pipapo_commit() here. Both |
| * nft_pipapo_insert() and nft_pipapo_activate() are called once for each |
| * element, hence we can't purpose either one as a real commit operation. |
| */ |
| static void nft_pipapo_activate(const struct net *net, |
| const struct nft_set *set, |
| const struct nft_set_elem *elem) |
| { |
| struct nft_pipapo_elem *e; |
| |
| e = pipapo_get(net, set, (const u8 *)elem->key.val.data, 0); |
| if (IS_ERR(e)) |
| return; |
| |
| nft_set_elem_change_active(net, set, &e->ext); |
| nft_set_elem_clear_busy(&e->ext); |
| |
| pipapo_commit(set); |
| } |
| |
| /** |
| * pipapo_deactivate() - Check that element is in set, mark as inactive |
| * @net: Network namespace |
| * @set: nftables API set representation |
| * @data: Input key data |
| * @ext: nftables API extension pointer, used to check for end element |
| * |
| * This is a convenience function that can be called from both |
| * nft_pipapo_deactivate() and nft_pipapo_flush(), as they are in fact the same |
| * operation. |
| * |
| * Return: deactivated element if found, NULL otherwise. |
| */ |
| static void *pipapo_deactivate(const struct net *net, const struct nft_set *set, |
| const u8 *data, const struct nft_set_ext *ext) |
| { |
| struct nft_pipapo_elem *e; |
| |
| e = pipapo_get(net, set, data, nft_genmask_next(net)); |
| if (IS_ERR(e)) |
| return NULL; |
| |
| nft_set_elem_change_active(net, set, &e->ext); |
| |
| return e; |
| } |
| |
| /** |
| * nft_pipapo_deactivate() - Call pipapo_deactivate() to make element inactive |
| * @net: Network namespace |
| * @set: nftables API set representation |
| * @elem: nftables API element representation containing key data |
| * |
| * Return: deactivated element if found, NULL otherwise. |
| */ |
| static void *nft_pipapo_deactivate(const struct net *net, |
| const struct nft_set *set, |
| const struct nft_set_elem *elem) |
| { |
| const struct nft_set_ext *ext = nft_set_elem_ext(set, elem->priv); |
| |
| return pipapo_deactivate(net, set, (const u8 *)elem->key.val.data, ext); |
| } |
| |
| /** |
| * nft_pipapo_flush() - Call pipapo_deactivate() to make element inactive |
| * @net: Network namespace |
| * @set: nftables API set representation |
| * @elem: nftables API element representation containing key data |
| * |
| * This is functionally the same as nft_pipapo_deactivate(), with a slightly |
| * different interface, and it's also called once for each element in a set |
| * being flushed, so we can't implement, strictly speaking, a flush operation, |
| * which would otherwise be as simple as allocating an empty copy of the |
| * matching data. |
| * |
| * Note that we could in theory do that, mark the set as flushed, and ignore |
| * subsequent calls, but we would leak all the elements after the first one, |
| * because they wouldn't then be freed as result of API calls. |
| * |
| * Return: true if element was found and deactivated. |
| */ |
| static bool nft_pipapo_flush(const struct net *net, const struct nft_set *set, |
| void *elem) |
| { |
| struct nft_pipapo_elem *e = elem; |
| |
| return pipapo_deactivate(net, set, (const u8 *)nft_set_ext_key(&e->ext), |
| &e->ext); |
| } |
| |
| /** |
| * pipapo_get_boundaries() - Get byte interval for associated rules |
| * @f: Field including lookup table |
| * @first_rule: First rule (lowest index) |
| * @rule_count: Number of associated rules |
| * @left: Byte expression for left boundary (start of range) |
| * @right: Byte expression for right boundary (end of range) |
| * |
| * Given the first rule and amount of rules that originated from the same entry, |
| * build the original range associated with the entry, and calculate the length |
| * of the originating netmask. |
| * |
| * In pictures: |
| * |
| * bucket |
| * group 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |
| * 0 1,2 |
| * 1 1,2 |
| * 2 1,2 |
| * 3 1,2 |
| * 4 1,2 |
| * 5 1 2 |
| * 6 1,2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 |
| * 7 1,2 1,2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 |
| * |
| * this is the lookup table corresponding to the IPv4 range |
| * 192.168.1.0-192.168.2.1, which was expanded to the two composing netmasks, |
| * rule #1: 192.168.1.0/24, and rule #2: 192.168.2.0/31. |
| * |
| * This function fills @left and @right with the byte values of the leftmost |
| * and rightmost bucket indices for the lowest and highest rule indices, |
| * respectively. If @first_rule is 1 and @rule_count is 2, we obtain, in |
| * nibbles: |
| * left: < 12, 0, 10, 8, 0, 1, 0, 0 > |
| * right: < 12, 0, 10, 8, 0, 2, 2, 1 > |
| * corresponding to bytes: |
| * left: < 192, 168, 1, 0 > |
| * right: < 192, 168, 2, 1 > |
| * with mask length irrelevant here, unused on return, as the range is already |
| * defined by its start and end points. The mask length is relevant for a single |
| * ranged entry instead: if @first_rule is 1 and @rule_count is 1, we ignore |
| * rule 2 above: @left becomes < 192, 168, 1, 0 >, @right becomes |
| * < 192, 168, 1, 255 >, and the mask length, calculated from the distances |
| * between leftmost and rightmost bucket indices for each group, would be 24. |
| * |
| * Return: mask length, in bits. |
| */ |
| static int pipapo_get_boundaries(struct nft_pipapo_field *f, int first_rule, |
| int rule_count, u8 *left, u8 *right) |
| { |
| int g, mask_len = 0, bit_offset = 0; |
| u8 *l = left, *r = right; |
| |
| for (g = 0; g < f->groups; g++) { |
| int b, x0, x1; |
| |
| x0 = -1; |
| x1 = -1; |
| for (b = 0; b < NFT_PIPAPO_BUCKETS(f->bb); b++) { |
| unsigned long *pos; |
| |
| pos = NFT_PIPAPO_LT_ALIGN(f->lt) + |
| (g * NFT_PIPAPO_BUCKETS(f->bb) + b) * f->bsize; |
| if (test_bit(first_rule, pos) && x0 == -1) |
| x0 = b; |
| if (test_bit(first_rule + rule_count - 1, pos)) |
| x1 = b; |
| } |
| |
| *l |= x0 << (BITS_PER_BYTE - f->bb - bit_offset); |
| *r |= x1 << (BITS_PER_BYTE - f->bb - bit_offset); |
| |
| bit_offset += f->bb; |
| if (bit_offset >= BITS_PER_BYTE) { |
| bit_offset %= BITS_PER_BYTE; |
| l++; |
| r++; |
| } |
| |
| if (x1 - x0 == 0) |
| mask_len += 4; |
| else if (x1 - x0 == 1) |
| mask_len += 3; |
| else if (x1 - x0 == 3) |
| mask_len += 2; |
| else if (x1 - x0 == 7) |
| mask_len += 1; |
| } |
| |
| return mask_len; |
| } |
| |
| /** |
| * pipapo_match_field() - Match rules against byte ranges |
| * @f: Field including the lookup table |
| * @first_rule: First of associated rules originating from same entry |
| * @rule_count: Amount of associated rules |
| * @start: Start of range to be matched |
| * @end: End of range to be matched |
| * |
| * Return: true on match, false otherwise. |
| */ |
| static bool pipapo_match_field(struct nft_pipapo_field *f, |
| int first_rule, int rule_count, |
| const u8 *start, const u8 *end) |
| { |
| u8 right[NFT_PIPAPO_MAX_BYTES] = { 0 }; |
| u8 left[NFT_PIPAPO_MAX_BYTES] = { 0 }; |
| |
| pipapo_get_boundaries(f, first_rule, rule_count, left, right); |
| |
| return !memcmp(start, left, |
| f->groups / NFT_PIPAPO_GROUPS_PER_BYTE(f)) && |
| !memcmp(end, right, f->groups / NFT_PIPAPO_GROUPS_PER_BYTE(f)); |
| } |
| |
| /** |
| * nft_pipapo_remove() - Remove element given key, commit |
| * @net: Network namespace |
| * @set: nftables API set representation |
| * @elem: nftables API element representation containing key data |
| * |
| * Similarly to nft_pipapo_activate(), this is used as commit operation by the |
| * API, but it's called once per element in the pending transaction, so we can't |
| * implement this as a single commit operation. Closest we can get is to remove |
| * the matched element here, if any, and commit the updated matching data. |
| */ |
| static void nft_pipapo_remove(const struct net *net, const struct nft_set *set, |
| const struct nft_set_elem *elem) |
| { |
| struct nft_pipapo *priv = nft_set_priv(set); |
| struct nft_pipapo_match *m = priv->clone; |
| struct nft_pipapo_elem *e = elem->priv; |
| int rules_f0, first_rule = 0; |
| const u8 *data; |
| |
| data = (const u8 *)nft_set_ext_key(&e->ext); |
| |
| e = pipapo_get(net, set, data, 0); |
| if (IS_ERR(e)) |
| return; |
| |
| while ((rules_f0 = pipapo_rules_same_key(m->f, first_rule))) { |
| union nft_pipapo_map_bucket rulemap[NFT_PIPAPO_MAX_FIELDS]; |
| const u8 *match_start, *match_end; |
| struct nft_pipapo_field *f; |
| int i, start, rules_fx; |
| |
| match_start = data; |
| match_end = (const u8 *)nft_set_ext_key_end(&e->ext)->data; |
| |
| start = first_rule; |
| rules_fx = rules_f0; |
| |
| nft_pipapo_for_each_field(f, i, m) { |
| if (!pipapo_match_field(f, start, rules_fx, |
| match_start, match_end)) |
| break; |
| |
| rulemap[i].to = start; |
| rulemap[i].n = rules_fx; |
| |
| rules_fx = f->mt[start].n; |
| start = f->mt[start].to; |
| |
| match_start += NFT_PIPAPO_GROUPS_PADDED_SIZE(f); |
| match_end += NFT_PIPAPO_GROUPS_PADDED_SIZE(f); |
| } |
| |
| if (i == m->field_count) { |
| priv->dirty = true; |
| pipapo_drop(m, rulemap); |
| pipapo_commit(set); |
| return; |
| } |
| |
| first_rule += rules_f0; |
| } |
| } |
| |
| /** |
| * nft_pipapo_walk() - Walk over elements |
| * @ctx: nftables API context |
| * @set: nftables API set representation |
| * @iter: Iterator |
| * |
| * As elements are referenced in the mapping array for the last field, directly |
| * scan that array: there's no need to follow rule mappings from the first |
| * field. |
| */ |
| static void nft_pipapo_walk(const struct nft_ctx *ctx, struct nft_set *set, |
| struct nft_set_iter *iter) |
| { |
| struct nft_pipapo *priv = nft_set_priv(set); |
| struct nft_pipapo_match *m; |
| struct nft_pipapo_field *f; |
| int i, r; |
| |
| rcu_read_lock(); |
| m = rcu_dereference(priv->match); |
| |
| if (unlikely(!m)) |
| goto out; |
| |
| for (i = 0, f = m->f; i < m->field_count - 1; i++, f++) |
| ; |
| |
| for (r = 0; r < f->rules; r++) { |
| struct nft_pipapo_elem *e; |
| struct nft_set_elem elem; |
| |
| if (r < f->rules - 1 && f->mt[r + 1].e == f->mt[r].e) |
| continue; |
| |
| if (iter->count < iter->skip) |
| goto cont; |
| |
| e = f->mt[r].e; |
| if (nft_set_elem_expired(&e->ext)) |
| goto cont; |
| |
| elem.priv = e; |
| |
| iter->err = iter->fn(ctx, set, iter, &elem); |
| if (iter->err < 0) |
| goto out; |
| |
| cont: |
| iter->count++; |
| } |
| |
| out: |
| rcu_read_unlock(); |
| } |
| |
| /** |
| * nft_pipapo_privsize() - Return the size of private data for the set |
| * @nla: netlink attributes, ignored as size doesn't depend on them |
| * @desc: Set description, ignored as size doesn't depend on it |
| * |
| * Return: size of private data for this set implementation, in bytes |
| */ |
| static u64 nft_pipapo_privsize(const struct nlattr * const nla[], |
| const struct nft_set_desc *desc) |
| { |
| return sizeof(struct nft_pipapo); |
| } |
| |
| /** |
| * nft_pipapo_estimate() - Set size, space and lookup complexity |
| * @desc: Set description, element count and field description used |
| * @features: Flags: NFT_SET_INTERVAL needs to be there |
| * @est: Storage for estimation data |
| * |
| * Return: true if set description is compatible, false otherwise |
| */ |
| static bool nft_pipapo_estimate(const struct nft_set_desc *desc, u32 features, |
| struct nft_set_estimate *est) |
| { |
| if (!(features & NFT_SET_INTERVAL) || |
| desc->field_count < NFT_PIPAPO_MIN_FIELDS) |
| return false; |
| |
| est->size = pipapo_estimate_size(desc); |
| if (!est->size) |
| return false; |
| |
| est->lookup = NFT_SET_CLASS_O_LOG_N; |
| |
| est->space = NFT_SET_CLASS_O_N; |
| |
| return true; |
| } |
| |
| /** |
| * nft_pipapo_init() - Initialise data for a set instance |
| * @set: nftables API set representation |
| * @desc: Set description |
| * @nla: netlink attributes |
| * |
| * Validate number and size of fields passed as NFTA_SET_DESC_CONCAT netlink |
| * attributes, initialise internal set parameters, current instance of matching |
| * data and a copy for subsequent insertions. |
| * |
| * Return: 0 on success, negative error code on failure. |
| */ |
| static int nft_pipapo_init(const struct nft_set *set, |
| const struct nft_set_desc *desc, |
| const struct nlattr * const nla[]) |
| { |
| struct nft_pipapo *priv = nft_set_priv(set); |
| struct nft_pipapo_match *m; |
| struct nft_pipapo_field *f; |
| int err, i, field_count; |
| |
| field_count = desc->field_count ? : 1; |
| |
| if (field_count > NFT_PIPAPO_MAX_FIELDS) |
| return -EINVAL; |
| |
| m = kmalloc(sizeof(*priv->match) + sizeof(*f) * field_count, |
| GFP_KERNEL); |
| if (!m) |
| return -ENOMEM; |
| |
| m->field_count = field_count; |
| m->bsize_max = 0; |
| |
| m->scratch = alloc_percpu(unsigned long *); |
| if (!m->scratch) { |
| err = -ENOMEM; |
| goto out_scratch; |
| } |
| for_each_possible_cpu(i) |
| *per_cpu_ptr(m->scratch, i) = NULL; |
| |
| #ifdef NFT_PIPAPO_ALIGN |
| m->scratch_aligned = alloc_percpu(unsigned long *); |
| if (!m->scratch_aligned) { |
| err = -ENOMEM; |
| goto out_free; |
| } |
| for_each_possible_cpu(i) |
| *per_cpu_ptr(m->scratch_aligned, i) = NULL; |
| #endif |
| |
| rcu_head_init(&m->rcu); |
| |
| nft_pipapo_for_each_field(f, i, m) { |
| int len = desc->field_len[i] ? : set->klen; |
| |
| f->bb = NFT_PIPAPO_GROUP_BITS_INIT; |
| f->groups = len * NFT_PIPAPO_GROUPS_PER_BYTE(f); |
| |
| priv->width += round_up(len, sizeof(u32)); |
| |
| f->bsize = 0; |
| f->rules = 0; |
| NFT_PIPAPO_LT_ASSIGN(f, NULL); |
| f->mt = NULL; |
| } |
| |
| /* Create an initial clone of matching data for next insertion */ |
| priv->clone = pipapo_clone(m); |
| if (IS_ERR(priv->clone)) { |
| err = PTR_ERR(priv->clone); |
| goto out_free; |
| } |
| |
| priv->dirty = false; |
| |
| rcu_assign_pointer(priv->match, m); |
| |
| return 0; |
| |
| out_free: |
| #ifdef NFT_PIPAPO_ALIGN |
| free_percpu(m->scratch_aligned); |
| #endif |
| free_percpu(m->scratch); |
| out_scratch: |
| kfree(m); |
| |
| return err; |
| } |
| |
| /** |
| * nft_pipapo_destroy() - Free private data for set and all committed elements |
| * @set: nftables API set representation |
| */ |
| static void nft_pipapo_destroy(const struct nft_set *set) |
| { |
| struct nft_pipapo *priv = nft_set_priv(set); |
| struct nft_pipapo_match *m; |
| struct nft_pipapo_field *f; |
| int i, r, cpu; |
| |
| m = rcu_dereference_protected(priv->match, true); |
| if (m) { |
| rcu_barrier(); |
| |
| for (i = 0, f = m->f; i < m->field_count - 1; i++, f++) |
| ; |
| |
| for (r = 0; r < f->rules; r++) { |
| struct nft_pipapo_elem *e; |
| |
| if (r < f->rules - 1 && f->mt[r + 1].e == f->mt[r].e) |
| continue; |
| |
| e = f->mt[r].e; |
| |
| nft_set_elem_destroy(set, e, true); |
| } |
| |
| #ifdef NFT_PIPAPO_ALIGN |
| free_percpu(m->scratch_aligned); |
| #endif |
| for_each_possible_cpu(cpu) |
| kfree(*per_cpu_ptr(m->scratch, cpu)); |
| free_percpu(m->scratch); |
| pipapo_free_fields(m); |
| kfree(m); |
| priv->match = NULL; |
| } |
| |
| if (priv->clone) { |
| #ifdef NFT_PIPAPO_ALIGN |
| free_percpu(priv->clone->scratch_aligned); |
| #endif |
| for_each_possible_cpu(cpu) |
| kfree(*per_cpu_ptr(priv->clone->scratch, cpu)); |
| free_percpu(priv->clone->scratch); |
| |
| pipapo_free_fields(priv->clone); |
| kfree(priv->clone); |
| priv->clone = NULL; |
| } |
| } |
| |
| /** |
| * nft_pipapo_gc_init() - Initialise garbage collection |
| * @set: nftables API set representation |
| * |
| * Instead of actually setting up a periodic work for garbage collection, as |
| * this operation requires a swap of matching data with the working copy, we'll |
| * do that opportunistically with other commit operations if the interval is |
| * elapsed, so we just need to set the current jiffies timestamp here. |
| */ |
| static void nft_pipapo_gc_init(const struct nft_set *set) |
| { |
| struct nft_pipapo *priv = nft_set_priv(set); |
| |
| priv->last_gc = jiffies; |
| } |
| |
| const struct nft_set_type nft_set_pipapo_type = { |
| .features = NFT_SET_INTERVAL | NFT_SET_MAP | NFT_SET_OBJECT | |
| NFT_SET_TIMEOUT, |
| .ops = { |
| .lookup = nft_pipapo_lookup, |
| .insert = nft_pipapo_insert, |
| .activate = nft_pipapo_activate, |
| .deactivate = nft_pipapo_deactivate, |
| .flush = nft_pipapo_flush, |
| .remove = nft_pipapo_remove, |
| .walk = nft_pipapo_walk, |
| .get = nft_pipapo_get, |
| .privsize = nft_pipapo_privsize, |
| .estimate = nft_pipapo_estimate, |
| .init = nft_pipapo_init, |
| .destroy = nft_pipapo_destroy, |
| .gc_init = nft_pipapo_gc_init, |
| .elemsize = offsetof(struct nft_pipapo_elem, ext), |
| }, |
| }; |
| |
| #if defined(CONFIG_X86_64) && !defined(CONFIG_UML) |
| const struct nft_set_type nft_set_pipapo_avx2_type = { |
| .features = NFT_SET_INTERVAL | NFT_SET_MAP | NFT_SET_OBJECT | |
| NFT_SET_TIMEOUT, |
| .ops = { |
| .lookup = nft_pipapo_avx2_lookup, |
| .insert = nft_pipapo_insert, |
| .activate = nft_pipapo_activate, |
| .deactivate = nft_pipapo_deactivate, |
| .flush = nft_pipapo_flush, |
| .remove = nft_pipapo_remove, |
| .walk = nft_pipapo_walk, |
| .get = nft_pipapo_get, |
| .privsize = nft_pipapo_privsize, |
| .estimate = nft_pipapo_avx2_estimate, |
| .init = nft_pipapo_init, |
| .destroy = nft_pipapo_destroy, |
| .gc_init = nft_pipapo_gc_init, |
| .elemsize = offsetof(struct nft_pipapo_elem, ext), |
| }, |
| }; |
| #endif |