diff --git a/CREDITS b/CREDITS
index 2358846..b50db17 100644
--- a/CREDITS
+++ b/CREDITS
@@ -598,6 +598,11 @@
 S: Taiwan 251
 S: Republic of China
 
+N: Reinette Chatre
+E: reinette.chatre@intel.com
+D: WiMedia Link Protocol implementation
+D: UWB stack bits and pieces
+
 N: Michael Elizabeth Chastain
 E: mec@shout.net
 D: Configure, Menuconfig, xconfig
@@ -2695,6 +2700,12 @@
 S: Tula 300000
 S: Russia
 
+N: Inaky Perez-Gonzalez
+E: inaky.perez-gonzalez@intel.com
+D: UWB stack, HWA-RC driver and HWA-HC drivers
+D: Wireless USB additions to the USB stack
+D: WiMedia Link Protocol bits and pieces
+
 N: Gordon Peters
 E: GordPeters@smarttech.com
 D: Isochronous receive for IEEE 1394 driver (OHCI module).
diff --git a/Documentation/ABI/testing/sysfs-bus-umc b/Documentation/ABI/testing/sysfs-bus-umc
new file mode 100644
index 0000000..948fec4
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-umc
@@ -0,0 +1,28 @@
+What:           /sys/bus/umc/
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The Wireless Host Controller Interface (WHCI)
+                specification describes a PCI-based device with
+                multiple capabilities; the UWB Multi-interface
+                Controller (UMC).
+
+                The umc bus presents each of the individual
+                capabilties as a device.
+
+What:           /sys/bus/umc/devices/.../capability_id
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The ID of this capability, with 0 being the radio
+                controller capability.
+
+What:           /sys/bus/umc/devices/.../version
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The specification version this capability's hardware
+                interface complies with.
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index df6c8a0..7772928 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -101,3 +101,46 @@
 Users:
 		USB PM tool
 		git://git.moblin.org/users/sarah/usb-pm-tool/
+
+What:		/sys/bus/usb/device/.../authorized
+Date:		July 2008
+KernelVersion:	2.6.26
+Contact:	David Vrabel <david.vrabel@csr.com>
+Description:
+		Authorized devices are available for use by device
+		drivers, non-authorized one are not.  By default, wired
+		USB devices are authorized.
+
+		Certified Wireless USB devices are not authorized
+		initially and should be (by writing 1) after the
+		device has been authenticated.
+
+What:		/sys/bus/usb/device/.../wusb_cdid
+Date:		July 2008
+KernelVersion:	2.6.27
+Contact:	David Vrabel <david.vrabel@csr.com>
+Description:
+		For Certified Wireless USB devices only.
+
+		A devices's CDID, as 16 space-separated hex octets.
+
+What:		/sys/bus/usb/device/.../wusb_ck
+Date:		July 2008
+KernelVersion:	2.6.27
+Contact:	David Vrabel <david.vrabel@csr.com>
+Description:
+		For Certified Wireless USB devices only.
+
+		Write the device's connection key (CK) to start the
+		authentication of the device.  The CK is 16
+		space-separated hex octets.
+
+What:		/sys/bus/usb/device/.../wusb_disconnect
+Date:		July 2008
+KernelVersion:	2.6.27
+Contact:	David Vrabel <david.vrabel@csr.com>
+Description:
+		For Certified Wireless USB devices only.
+
+		Write a 1 to force the device to disconnect
+		(equivalent to unplugging a wired USB device).
diff --git a/Documentation/ABI/testing/sysfs-class-usb_host b/Documentation/ABI/testing/sysfs-class-usb_host
new file mode 100644
index 0000000..46b66ad1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-usb_host
@@ -0,0 +1,25 @@
+What:           /sys/class/usb_host/usb_hostN/wusb_chid
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                Write the CHID (16 space-separated hex octets) for this host controller.
+                This starts the host controller, allowing it to accept connection from
+                WUSB devices.
+
+                Set an all zero CHID to stop the host controller.
+
+What:           /sys/class/usb_host/usb_hostN/wusb_trust_timeout
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                Devices that haven't sent a WUSB packet to the host
+                within 'wusb_trust_timeout' ms are considered to have
+                disconnected and are removed.  The default value of
+                4000 ms is the value required by the WUSB
+                specification.
+
+                Since this relates to security (specifically, the
+                lifetime of PTKs and GTKs) it should not be changed
+                from the default.
diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc b/Documentation/ABI/testing/sysfs-class-uwb_rc
new file mode 100644
index 0000000..a0d18dbe
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-uwb_rc
@@ -0,0 +1,144 @@
+What:           /sys/class/uwb_rc
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                Interfaces for WiMedia Ultra Wideband Common Radio
+                Platform (UWB) radio controllers.
+
+                Familiarity with the ECMA-368 'High Rate Ultra
+                Wideband MAC and PHY Specification' is assumed.
+
+What:           /sys/class/uwb_rc/beacon_timeout_ms
+Date:           July 2008
+KernelVersion:  2.6.27
+Description:
+                If no beacons are received from a device for at least
+                this time, the device will be considered to have gone
+                and it will be removed.  The default is 3 superframes
+                (~197 ms) as required by the specification.
+
+What:           /sys/class/uwb_rc/uwbN/
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                An individual UWB radio controller.
+
+What:           /sys/class/uwb_rc/uwbN/beacon
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                Write:
+
+                <channel> [<bpst offset>]
+
+                to start beaconing on a specific channel, or stop
+                beaconing if <channel> is -1.  Valid channels depends
+                on the radio controller's supported band groups.
+
+                <bpst offset> may be used to try and join a specific
+                beacon group if more than one was found during a scan.
+
+What:           /sys/class/uwb_rc/uwbN/scan
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                Write:
+
+                <channel> <type> [<bpst offset>]
+
+                to start (or stop) scanning on a channel.  <type> is one of:
+                    0 - scan
+                    1 - scan outside BP
+                    2 - scan while inactive
+                    3 - scanning disabled
+                    4 - scan (with start time of <bpst offset>)
+
+What:           /sys/class/uwb_rc/uwbN/mac_address
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                The EUI-48, in colon-separated hex octets, for this
+                radio controller.  A write will change the radio
+                controller's EUI-48 but only do so while the device is
+                not beaconing or scanning.
+
+What:           /sys/class/uwb_rc/uwbN/wusbhc
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                A symlink to the device (if any) of the WUSB Host
+                Controller PAL using this radio controller.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                A neighbour UWB device that has either been detected
+                as part of a scan or is a member of the radio
+                controllers beacon group.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/BPST
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                The time (using the radio controllers internal 1 ms
+                interval superframe timer) of the last beacon from
+                this device was received.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/DevAddr
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                The current DevAddr of this device in colon separated
+                hex octets.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/EUI_48
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+
+                The EUI-48 of this device in colon separated hex
+                octets.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/BPST
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/IEs
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                The latest IEs included in this device's beacon, in
+                space separated hex octets with one IE per line.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/LQE
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                Link Quality Estimate - the Signal to Noise Ratio
+                (SNR) of all packets received from this device in dB.
+                This gives an estimate on a suitable PHY rate. Refer
+                to [ECMA-368] section 13.3 for more details.
+
+What:           /sys/class/uwb_rc/uwbN/<EUI-48>/RSSI
+Date:           July 2008
+KernelVersion:  2.6.27
+Contact:        linux-usb@vger.kernel.org
+Description:
+                Received Signal Strength Indication - the strength of
+                the received signal in dB.  LQE is a more useful
+                measure of the radio link quality.
diff --git a/Documentation/ABI/testing/sysfs-wusb_cbaf b/Documentation/ABI/testing/sysfs-wusb_cbaf
new file mode 100644
index 0000000..a99c5f8
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-wusb_cbaf
@@ -0,0 +1,100 @@
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_*
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                Various files for managing Cable Based Association of
+                (wireless) USB devices.
+
+                The sequence of operations should be:
+
+                1. Device is plugged in.
+
+                2. The connection manager (CM) sees a device with CBA capability.
+                   (the wusb_chid etc. files in /sys/devices/blah/OURDEVICE).
+
+                3. The CM writes the host name, supported band groups,
+                   and the CHID (host ID) into the wusb_host_name,
+                   wusb_host_band_groups and wusb_chid files. These
+                   get sent to the device and the CDID (if any) for
+                   this host is requested.
+
+                4. The CM can verify that the device's supported band
+                   groups (wusb_device_band_groups) are compatible
+                   with the host.
+
+                5. The CM reads the wusb_cdid file.
+
+                6. The CM looks it up its database.
+
+                   - If it has a matching CHID,CDID entry, the device
+                     has been authorized before and nothing further
+                     needs to be done.
+
+                   - If the CDID is zero (or the CM doesn't find a
+                     matching CDID in its database), the device is
+                     assumed to be not known.  The CM may associate
+                     the host with device by: writing a randomly
+                     generated CDID to wusb_cdid and then a random CK
+                     to wusb_ck (this uploads the new CC to the
+                     device).
+
+                     CMD may choose to prompt the user before
+                     associating with a new device.
+
+                7. Device is unplugged.
+
+                References:
+                  [WUSB-AM] Association Models Supplement to the
+                            Certified Wireless Universal Serial Bus
+                            Specification, version 1.0.
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_chid
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The CHID of the host formatted as 16 space-separated
+                hex octets.
+
+                Writes fetches device's supported band groups and the
+                the CDID for any existing association with this host.
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_host_name
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                A friendly name for the host as a UTF-8 encoded string.
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_host_band_groups
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The band groups supported by the host, in the format
+                defined in [WUSB-AM].
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_device_band_groups
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The band groups supported by the device, in the format
+                defined in [WUSB-AM].
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_cdid
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The device's CDID formatted as 16 space-separated hex
+                octets.
+
+What:           /sys/bus/usb/drivers/wusb_cbaf/.../wusb_ck
+Date:           August 2008
+KernelVersion:  2.6.27
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                Write 16 space-separated random, hex octets to
+                associate with the device.
diff --git a/Documentation/DocBook/deviceiobook.tmpl b/Documentation/DocBook/deviceiobook.tmpl
index 9ee6f3c..60d6e0b 100644
--- a/Documentation/DocBook/deviceiobook.tmpl
+++ b/Documentation/DocBook/deviceiobook.tmpl
@@ -316,7 +316,7 @@
 
   <chapter id="pubfunctions">
      <title>Public Functions Provided</title>
-!Iinclude/asm-x86/io_32.h
+!Iarch/x86/include/asm/io_32.h
 !Elib/iomap.c
   </chapter>
 
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index 9d0058e..5818ff7 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -45,8 +45,8 @@
      </sect1>
 
      <sect1><title>Atomic and pointer manipulation</title>
-!Iinclude/asm-x86/atomic_32.h
-!Iinclude/asm-x86/unaligned.h
+!Iarch/x86/include/asm/atomic_32.h
+!Iarch/x86/include/asm/unaligned.h
      </sect1>
 
      <sect1><title>Delaying, scheduling, and timer routines</title>
@@ -119,7 +119,7 @@
 !Elib/string.c
      </sect1>
      <sect1><title>Bit Operations</title>
-!Iinclude/asm-x86/bitops.h
+!Iarch/x86/include/asm/bitops.h
      </sect1>
   </chapter>
 
@@ -155,7 +155,7 @@
 !Emm/slab.c
      </sect1>
      <sect1><title>User Space Memory Access</title>
-!Iinclude/asm-x86/uaccess_32.h
+!Iarch/x86/include/asm/uaccess_32.h
 !Earch/x86/lib/usercopy_32.c
      </sect1>
      <sect1><title>More Memory Management Functions</title>
@@ -265,7 +265,7 @@
 -->
 	</sect2>
 	<sect2><title>MCA Bus DMA</title>
-!Iinclude/asm-x86/mca_dma.h
+!Iarch/x86/include/asm/mca_dma.h
 	</sect2>
      </sect1>
   </chapter>
diff --git a/Documentation/DocBook/kernel-hacking.tmpl b/Documentation/DocBook/kernel-hacking.tmpl
index ae15d55..a50d6cd 100644
--- a/Documentation/DocBook/kernel-hacking.tmpl
+++ b/Documentation/DocBook/kernel-hacking.tmpl
@@ -1239,7 +1239,7 @@
   </para>
 
   <para>
-   <filename>include/asm-x86/delay_32.h:</filename>
+   <filename>arch/x86/include/asm/delay.h:</filename>
   </para>
   <programlisting>
 #define ndelay(n) (__builtin_constant_p(n) ? \
@@ -1265,7 +1265,7 @@
 </programlisting>
 
   <para>
-   <filename>include/asm-x86/uaccess_32.h:</filename>
+   <filename>arch/x86/include/asm/uaccess_32.h:</filename>
   </para>
 
   <programlisting>
diff --git a/Documentation/DocBook/mcabook.tmpl b/Documentation/DocBook/mcabook.tmpl
index 529a53dc..499eddc 100644
--- a/Documentation/DocBook/mcabook.tmpl
+++ b/Documentation/DocBook/mcabook.tmpl
@@ -101,7 +101,7 @@
 
   <chapter id="dmafunctions">
      <title>DMA Functions Provided</title>
-!Iinclude/asm-x86/mca_dma.h
+!Iarch/x86/include/asm/mca_dma.h
   </chapter>
 
 </book>
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index f5f812d..05d71b4b 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -359,3 +359,11 @@
       eliminates the need for ide-scsi. The new method is more
       efficient in every way.
 Who:  FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
+
+---------------------------
+
+What:	i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client()
+When:	2.6.29 (ideally) or 2.6.30 (more likely)
+Why:	Deprecated by the new (standard) device driver binding model. Use
+	i2c_driver->probe() and ->remove() instead.
+Who:	Jean Delvare <khali@linux-fr.org>
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index e0d5206..0e84117 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -8,7 +8,7 @@
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/pf/LM/LM90.html
   * National Semiconductor LM89
-    Prefix: 'lm99'
+    Prefix: 'lm89' (no auto-detection)
     Addresses scanned: I2C 0x4c and 0x4d
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/mpf/LM/LM89.html
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index c31e029..81c0c59 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -13,8 +13,9 @@
   * Intel 631xESB/632xESB (ESB2)
   * Intel 82801H (ICH8)
   * Intel 82801I (ICH9)
-  * Intel Tolapai
-  * Intel ICH10
+  * Intel EP80579 (Tolapai)
+  * Intel 82801JI (ICH10)
+  * Intel PCH
    Datasheets: Publicly available at the Intel website
 
 Authors: 
@@ -32,7 +33,7 @@
 -----------
 
 The ICH (properly known as the 82801AA), ICH0 (82801AB), ICH2 (82801BA),
-ICH3 (82801CA/CAM) and later devices are Intel chips that are a part of
+ICH3 (82801CA/CAM) and later devices (PCH) are Intel chips that are a part of
 Intel's '810' chipset for Celeron-based PCs, '810E' chipset for
 Pentium-based PCs, '815E' chipset, and others.
 
diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients
deleted file mode 100644
index 7bf82c0..0000000
--- a/Documentation/i2c/porting-clients
+++ /dev/null
@@ -1,160 +0,0 @@
-Revision 7, 2007-04-19
-Jean Delvare <khali@linux-fr.org>
-Greg KH <greg@kroah.com>
-
-This is a guide on how to convert I2C chip drivers from Linux 2.4 to
-Linux 2.6. I have been using existing drivers (lm75, lm78) as examples.
-Then I converted a driver myself (lm83) and updated this document.
-Note that this guide is strongly oriented towards hardware monitoring
-drivers. Many points are still valid for other type of drivers, but
-others may be irrelevant.
-
-There are two sets of points below. The first set concerns technical
-changes. The second set concerns coding policy. Both are mandatory.
-
-Although reading this guide will help you porting drivers, I suggest
-you keep an eye on an already ported driver while porting your own
-driver. This will help you a lot understanding what this guide
-exactly means. Choose the chip driver that is the more similar to
-yours for best results.
-
-Technical changes:
-
-* [Driver type] Any driver that was relying on i2c-isa has to be
-  converted to a proper isa, platform or pci driver. This is not
-  covered by this guide.
-
-* [Includes] Get rid of "version.h" and <linux/i2c-proc.h>.
-  Includes typically look like that:
-  #include <linux/module.h>
-  #include <linux/init.h>
-  #include <linux/slab.h>
-  #include <linux/jiffies.h>
-  #include <linux/i2c.h>
-  #include <linux/hwmon.h>	/* for hardware monitoring drivers */
-  #include <linux/hwmon-sysfs.h>
-  #include <linux/hwmon-vid.h>	/* if you need VRM support */
-  #include <linux/err.h>	/* for class registration */
-  Please respect this inclusion order. Some extra headers may be
-  required for a given driver (e.g. "lm75.h").
-
-* [Addresses] SENSORS_I2C_END becomes I2C_CLIENT_END, ISA addresses
-  are no more handled by the i2c core. Address ranges are no more
-  supported either, define each individual address separately.
-  SENSORS_INSMOD_<n> becomes I2C_CLIENT_INSMOD_<n>.
-
-* [Client data] Get rid of sysctl_id. Try using standard names for
-  register values (for example, temp_os becomes temp_max). You're
-  still relatively free here, but you *have* to follow the standard
-  names for sysfs files (see the Sysctl section below).
-
-* [Function prototypes] The detect functions loses its flags
-  parameter. Sysctl (e.g. lm75_temp) and miscellaneous functions
-  are off the list of prototypes. This usually leaves five
-  prototypes:
-  static int lm75_attach_adapter(struct i2c_adapter *adapter);
-  static int lm75_detect(struct i2c_adapter *adapter, int address,
-      int kind);
-  static void lm75_init_client(struct i2c_client *client);
-  static int lm75_detach_client(struct i2c_client *client);
-  static struct lm75_data lm75_update_device(struct device *dev);
-
-* [Sysctl] All sysctl stuff is of course gone (defines, ctl_table
-  and functions). Instead, you have to define show and set functions for
-  each sysfs file. Only define set for writable values. Take a look at an
-  existing 2.6 driver for details (it87 for example). Don't forget
-  to define the attributes for each file (this is that step that
-  links callback functions). Use the file names specified in
-  Documentation/hwmon/sysfs-interface for the individual files. Also
-  convert the units these files read and write to the specified ones.
-  If you need to add a new type of file, please discuss it on the
-  sensors mailing list <lm-sensors@lm-sensors.org> by providing a
-  patch to the Documentation/hwmon/sysfs-interface file.
-
-* [Attach] The attach function should make sure that the adapter's
-  class has I2C_CLASS_HWMON (or whatever class is suitable for your
-  driver), using the following construct:
-  if (!(adapter->class & I2C_CLASS_HWMON))
-          return 0;
-  Call i2c_probe() instead of i2c_detect().
-
-* [Detect] As mentioned earlier, the flags parameter is gone.
-  The type_name and client_name strings are replaced by a single
-  name string, which will be filled with a lowercase, short string.
-  The labels used for error paths are reduced to the number needed.
-  It is advised that the labels are given descriptive names such as
-  exit and exit_free. Don't forget to properly set err before
-  jumping to error labels. By the way, labels should be left-aligned.
-  Use kzalloc instead of kmalloc.
-  Use i2c_set_clientdata to set the client data (as opposed to
-  a direct access to client->data).
-  Use strlcpy instead of strcpy or snprintf to copy the client name.
-  Replace the sysctl directory registration by calls to
-  device_create_file. Move the driver initialization before any
-  sysfs file creation.
-  Register the client with the hwmon class (using hwmon_device_register)
-  if applicable.
-  Drop client->id.
-  Drop any 24RF08 corruption prevention you find, as this is now done
-  at the i2c-core level, and doing it twice voids it.
-  Don't add I2C_CLIENT_ALLOW_USE to client->flags, it's the default now.
-
-* [Init] Limits must not be set by the driver (can be done later in
-  user-space). Chip should not be reset default (although a module
-  parameter may be used to force it), and initialization should be
-  limited to the strictly necessary steps.
-
-* [Detach] Remove the call to i2c_deregister_entry. Do not log an
-  error message if i2c_detach_client fails, as i2c-core will now do
-  it for you.
-  Unregister from the hwmon class if applicable.
-
-* [Update] The function prototype changed, it is now
-  passed a device structure, which you have to convert to a client
-  using to_i2c_client(dev). The update function should return a
-  pointer to the client data.
-  Don't access client->data directly, use i2c_get_clientdata(client)
-  instead.
-  Use time_after() instead of direct jiffies comparison.
-
-* [Interface] Make sure there is a MODULE_LICENSE() line, at the bottom
-  of the file (after MODULE_AUTHOR() and MODULE_DESCRIPTION(), in this
-  order).
-
-* [Driver] The flags field of the i2c_driver structure is gone.
-  I2C_DF_NOTIFY is now the default behavior.
-  The i2c_driver structure has a driver member, which is itself a
-  structure, those name member should be initialized to a driver name
-  string. i2c_driver itself has no name member anymore.
-
-* [Driver model] Instead of shutdown or reboot notifiers, provide a
-  shutdown() method in your driver.
-
-* [Power management] Use the driver model suspend() and resume()
-  callbacks instead of the obsolete pm_register() calls.
-
-Coding policy:
-
-* [Copyright] Use (C), not (c), for copyright.
-
-* [Debug/log] Get rid of #ifdef DEBUG/#endif constructs whenever you
-  can. Calls to printk for debugging purposes are replaced by calls to
-  dev_dbg where possible, else to pr_debug. Here is an example of how
-  to call it (taken from lm75_detect):
-  dev_dbg(&client->dev, "Starting lm75 update\n");
-  Replace other printk calls with the dev_info, dev_err or dev_warn
-  function, as appropriate.
-
-* [Constants] Constants defines (registers, conversions) should be
-  aligned. This greatly improves readability.
-  Alignments are achieved by the means of tabs, not spaces. Remember
-  that tabs are set to 8 in the Linux kernel code.
-
-* [Layout] Avoid extra empty lines between comments and what they
-  comment. Respect the coding style (see Documentation/CodingStyle),
-  in particular when it comes to placing curly braces.
-
-* [Comments] Make sure that no comment refers to a file that isn't
-  part of the Linux source tree (typically doc/chips/<chip name>),
-  and that remaining comments still match the code. Merging comment
-  lines when possible is encouraged.
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index d73ee11..6b9af7d 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -10,23 +10,21 @@
 ===============
 
 Try to keep the kernel namespace as clean as possible. The best way to
-do this is to use a unique prefix for all global symbols. This is 
+do this is to use a unique prefix for all global symbols. This is
 especially important for exported symbols, but it is a good idea to do
 it for non-exported symbols too. We will use the prefix `foo_' in this
-tutorial, and `FOO_' for preprocessor variables.
+tutorial.
 
 
 The driver structure
 ====================
 
 Usually, you will implement a single driver structure, and instantiate
-all clients from it. Remember, a driver structure contains general access 
+all clients from it. Remember, a driver structure contains general access
 routines, and should be zero-initialized except for fields with data you
 provide.  A client structure holds device-specific information like the
 driver model device node, and its I2C address.
 
-/* iff driver uses driver model ("new style") binding model: */
-
 static struct i2c_device_id foo_idtable[] = {
 	{ "foo", my_id_for_foo },
 	{ "bar", my_id_for_bar },
@@ -40,7 +38,6 @@
 		.name	= "foo",
 	},
 
-	/* iff driver uses driver model ("new style") binding model: */
 	.id_table	= foo_ids,
 	.probe		= foo_probe,
 	.remove		= foo_remove,
@@ -49,24 +46,19 @@
 	.detect		= foo_detect,
 	.address_data	= &addr_data,
 
-	/* else, driver uses "legacy" binding model: */
-	.attach_adapter	= foo_attach_adapter,
-	.detach_client	= foo_detach_client,
-
-	/* these may be used regardless of the driver binding model */
 	.shutdown	= foo_shutdown,	/* optional */
 	.suspend	= foo_suspend,	/* optional */
 	.resume		= foo_resume,	/* optional */
-	.command	= foo_command,	/* optional */
+	.command	= foo_command,	/* optional, deprecated */
 }
- 
+
 The name field is the driver name, and must not contain spaces.  It
 should match the module name (if the driver can be compiled as a module),
 although you can use MODULE_ALIAS (passing "foo" in this example) to add
 another name for the module.  If the driver name doesn't match the module
 name, the module won't be automatically loaded (hotplug/coldplug).
 
-All other fields are for call-back functions which will be explained 
+All other fields are for call-back functions which will be explained
 below.
 
 
@@ -74,34 +66,13 @@
 =================
 
 Each client structure has a special `data' field that can point to any
-structure at all.  You should use this to keep device-specific data,
-especially in drivers that handle multiple I2C or SMBUS devices.  You
-do not always need this, but especially for `sensors' drivers, it can
-be very useful.
+structure at all.  You should use this to keep device-specific data.
 
 	/* store the value */
 	void i2c_set_clientdata(struct i2c_client *client, void *data);
 
 	/* retrieve the value */
-	void *i2c_get_clientdata(struct i2c_client *client);
-
-An example structure is below.
-
-  struct foo_data {
-    struct i2c_client client;
-    enum chips type;       /* To keep the chips type for `sensors' drivers. */
-   
-    /* Because the i2c bus is slow, it is often useful to cache the read
-       information of a chip for some time (for example, 1 or 2 seconds).
-       It depends of course on the device whether this is really worthwhile
-       or even sensible. */
-    struct mutex update_lock;     /* When we are reading lots of information,
-                                     another process should not update the
-                                     below information */
-    char valid;                   /* != 0 if the following fields are valid. */
-    unsigned long last_updated;   /* In jiffies */
-    /* Add the read information here too */
-  };
+	void *i2c_get_clientdata(const struct i2c_client *client);
 
 
 Accessing the client
@@ -109,11 +80,9 @@
 
 Let's say we have a valid client structure. At some time, we will need
 to gather information from the client, or write new information to the
-client. How we will export this information to user-space is less 
-important at this moment (perhaps we do not need to do this at all for
-some obscure clients). But we need generic reading and writing routines.
+client.
 
-I have found it useful to define foo_read and foo_write function for this.
+I have found it useful to define foo_read and foo_write functions for this.
 For some cases, it will be easier to call the i2c functions directly,
 but many chips have some kind of register-value idea that can easily
 be encapsulated.
@@ -121,33 +90,33 @@
 The below functions are simple examples, and should not be copied
 literally.
 
-  int foo_read_value(struct i2c_client *client, u8 reg)
-  {
-    if (reg < 0x10) /* byte-sized register */
-      return i2c_smbus_read_byte_data(client,reg);
-    else /* word-sized register */
-      return i2c_smbus_read_word_data(client,reg);
-  }
+int foo_read_value(struct i2c_client *client, u8 reg)
+{
+	if (reg < 0x10)	/* byte-sized register */
+		return i2c_smbus_read_byte_data(client, reg);
+	else		/* word-sized register */
+		return i2c_smbus_read_word_data(client, reg);
+}
 
-  int foo_write_value(struct i2c_client *client, u8 reg, u16 value)
-  {
-    if (reg == 0x10) /* Impossible to write - driver error! */ {
-      return -1;
-    else if (reg < 0x10) /* byte-sized register */
-      return i2c_smbus_write_byte_data(client,reg,value);
-    else /* word-sized register */
-      return i2c_smbus_write_word_data(client,reg,value);
-  }
+int foo_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+	if (reg == 0x10)	/* Impossible to write - driver error! */
+		return -EINVAL;
+	else if (reg < 0x10)	/* byte-sized register */
+		return i2c_smbus_write_byte_data(client, reg, value);
+	else			/* word-sized register */
+		return i2c_smbus_write_word_data(client, reg, value);
+}
 
 
 Probing and attaching
 =====================
 
 The Linux I2C stack was originally written to support access to hardware
-monitoring chips on PC motherboards, and thus it embeds some assumptions
-that are more appropriate to SMBus (and PCs) than to I2C.  One of these
-assumptions is that most adapters and devices drivers support the SMBUS_QUICK
-protocol to probe device presence.  Another is that devices and their drivers
+monitoring chips on PC motherboards, and thus used to embed some assumptions
+that were more appropriate to SMBus (and PCs) than to I2C.  One of these
+assumptions was that most adapters and devices drivers support the SMBUS_QUICK
+protocol to probe device presence.  Another was that devices and their drivers
 can be sufficiently configured using only such probe primitives.
 
 As Linux and its I2C stack became more widely used in embedded systems
@@ -164,6 +133,9 @@
 objects after SMBus style probing, while the Linux driver model expects
 drivers to be given such device objects in their probe() routines.
 
+The legacy model is deprecated now and will soon be removed, so we no
+longer document it here.
+
 
 Standard Driver Model Binding ("New Style")
 -------------------------------------------
@@ -193,8 +165,8 @@
 the driver knows which one in the table matched.
 
 
-Device Creation (Standard driver model)
----------------------------------------
+Device Creation
+---------------
 
 If you know for a fact that an I2C device is connected to a given I2C bus,
 you can instantiate that device by simply filling an i2c_board_info
@@ -221,8 +193,8 @@
 reference for later use.
 
 
-Device Detection (Standard driver model)
-----------------------------------------
+Device Detection
+----------------
 
 Sometimes you do not know in advance which I2C devices are connected to
 a given I2C bus.  This is for example the case of hardware monitoring
@@ -246,8 +218,8 @@
 quickly.
 
 
-Device Deletion (Standard driver model)
----------------------------------------
+Device Deletion
+---------------
 
 Each I2C device which has been created using i2c_new_device() or
 i2c_new_probed_device() can be unregistered by calling
@@ -256,264 +228,37 @@
 device can't survive its parent in the device driver model.
 
 
-Legacy Driver Binding Model
----------------------------
+Initializing the driver
+=======================
 
-Most i2c devices can be present on several i2c addresses; for some this
-is determined in hardware (by soldering some chip pins to Vcc or Ground),
-for others this can be changed in software (by writing to specific client
-registers). Some devices are usually on a specific address, but not always;
-and some are even more tricky. So you will probably need to scan several
-i2c addresses for your clients, and do some sort of detection to see
-whether it is actually a device supported by your driver.
+When the kernel is booted, or when your foo driver module is inserted,
+you have to do some initializing. Fortunately, just registering the
+driver module is usually enough.
 
-To give the user a maximum of possibilities, some default module parameters
-are defined to help determine what addresses are scanned. Several macros
-are defined in i2c.h to help you support them, as well as a generic
-detection algorithm.
+static int __init foo_init(void)
+{
+	return i2c_add_driver(&foo_driver);
+}
 
-You do not have to use this parameter interface; but don't try to use
-function i2c_probe() if you don't.
+static void __exit foo_cleanup(void)
+{
+	i2c_del_driver(&foo_driver);
+}
 
+/* Substitute your own name and email address */
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"
+MODULE_DESCRIPTION("Driver for Barf Inc. Foo I2C devices");
 
-Probing classes (Legacy model)
-------------------------------
+/* a few non-GPL license types are also allowed */
+MODULE_LICENSE("GPL");
 
-All parameters are given as lists of unsigned 16-bit integers. Lists are
-terminated by I2C_CLIENT_END.
-The following lists are used internally:
+module_init(foo_init);
+module_exit(foo_cleanup);
 
-  normal_i2c: filled in by the module writer. 
-     A list of I2C addresses which should normally be examined.
-   probe: insmod parameter. 
-     A list of pairs. The first value is a bus number (-1 for any I2C bus), 
-     the second is the address. These addresses are also probed, as if they 
-     were in the 'normal' list.
-   ignore: insmod parameter.
-     A list of pairs. The first value is a bus number (-1 for any I2C bus), 
-     the second is the I2C address. These addresses are never probed. 
-     This parameter overrules the 'normal_i2c' list only.
-   force: insmod parameter. 
-     A list of pairs. The first value is a bus number (-1 for any I2C bus),
-     the second is the I2C address. A device is blindly assumed to be on
-     the given address, no probing is done. 
-
-Additionally, kind-specific force lists may optionally be defined if
-the driver supports several chip kinds. They are grouped in a
-NULL-terminated list of pointers named forces, those first element if the
-generic force list mentioned above. Each additional list correspond to an
-insmod parameter of the form force_<kind>.
-
-Fortunately, as a module writer, you just have to define the `normal_i2c' 
-parameter. The complete declaration could look like this:
-
-  /* Scan 0x4c to 0x4f */
-  static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, 0x4f,
-                                               I2C_CLIENT_END };
-
-  /* Magic definition of all other variables and things */
-  I2C_CLIENT_INSMOD;
-  /* Or, if your driver supports, say, 2 kind of devices: */
-  I2C_CLIENT_INSMOD_2(foo, bar);
-
-If you use the multi-kind form, an enum will be defined for you:
-  enum chips { any_chip, foo, bar, ... }
-You can then (and certainly should) use it in the driver code.
-
-Note that you *have* to call the defined variable `normal_i2c',
-without any prefix!
-
-
-Attaching to an adapter (Legacy model)
---------------------------------------
-
-Whenever a new adapter is inserted, or for all adapters if the driver is
-being registered, the callback attach_adapter() is called. Now is the
-time to determine what devices are present on the adapter, and to register
-a client for each of them.
-
-The attach_adapter callback is really easy: we just call the generic
-detection function. This function will scan the bus for us, using the
-information as defined in the lists explained above. If a device is
-detected at a specific address, another callback is called.
-
-  int foo_attach_adapter(struct i2c_adapter *adapter)
-  {
-    return i2c_probe(adapter,&addr_data,&foo_detect_client);
-  }
-
-Remember, structure `addr_data' is defined by the macros explained above,
-so you do not have to define it yourself.
-
-The i2c_probe function will call the foo_detect_client
-function only for those i2c addresses that actually have a device on
-them (unless a `force' parameter was used). In addition, addresses that
-are already in use (by some other registered client) are skipped.
-
-
-The detect client function (Legacy model)
------------------------------------------
-
-The detect client function is called by i2c_probe. The `kind' parameter
-contains -1 for a probed detection, 0 for a forced detection, or a positive
-number for a forced detection with a chip type forced.
-
-Returning an error different from -ENODEV in a detect function will cause
-the detection to stop: other addresses and adapters won't be scanned.
-This should only be done on fatal or internal errors, such as a memory
-shortage or i2c_attach_client failing.
-
-For now, you can ignore the `flags' parameter. It is there for future use.
-
-  int foo_detect_client(struct i2c_adapter *adapter, int address, 
-                        int kind)
-  {
-    int err = 0;
-    int i;
-    struct i2c_client *client;
-    struct foo_data *data;
-    const char *name = "";
-   
-    /* Let's see whether this adapter can support what we need.
-       Please substitute the things you need here! */
-    if (!i2c_check_functionality(adapter,I2C_FUNC_SMBUS_WORD_DATA |
-                                        I2C_FUNC_SMBUS_WRITE_BYTE))
-       goto ERROR0;
-
-    /* OK. For now, we presume we have a valid client. We now create the
-       client structure, even though we cannot fill it completely yet.
-       But it allows us to access several i2c functions safely */
-    
-    if (!(data = kzalloc(sizeof(struct foo_data), GFP_KERNEL))) {
-      err = -ENOMEM;
-      goto ERROR0;
-    }
-
-    client = &data->client;
-    i2c_set_clientdata(client, data);
-
-    client->addr = address;
-    client->adapter = adapter;
-    client->driver = &foo_driver;
-
-    /* Now, we do the remaining detection. If no `force' parameter is used. */
-
-    /* First, the generic detection (if any), that is skipped if any force
-       parameter was used. */
-    if (kind < 0) {
-      /* The below is of course bogus */
-      if (foo_read(client, FOO_REG_GENERIC) != FOO_GENERIC_VALUE)
-         goto ERROR1;
-    }
-
-    /* Next, specific detection. This is especially important for `sensors'
-       devices. */
-
-    /* Determine the chip type. Not needed if a `force_CHIPTYPE' parameter
-       was used. */
-    if (kind <= 0) {
-      i = foo_read(client, FOO_REG_CHIPTYPE);
-      if (i == FOO_TYPE_1) 
-        kind = chip1; /* As defined in the enum */
-      else if (i == FOO_TYPE_2)
-        kind = chip2;
-      else {
-        printk("foo: Ignoring 'force' parameter for unknown chip at "
-               "adapter %d, address 0x%02x\n",i2c_adapter_id(adapter),address);
-        goto ERROR1;
-      }
-    }
-
-    /* Now set the type and chip names */
-    if (kind == chip1) {
-      name = "chip1";
-    } else if (kind == chip2) {
-      name = "chip2";
-    }
-   
-    /* Fill in the remaining client fields. */
-    strlcpy(client->name, name, I2C_NAME_SIZE);
-    data->type = kind;
-    mutex_init(&data->update_lock); /* Only if you use this field */
-
-    /* Any other initializations in data must be done here too. */
-
-    /* This function can write default values to the client registers, if
-       needed. */
-    foo_init_client(client);
-
-    /* Tell the i2c layer a new client has arrived */
-    if ((err = i2c_attach_client(client)))
-      goto ERROR1;
-
-    return 0;
-
-    /* OK, this is not exactly good programming practice, usually. But it is
-       very code-efficient in this case. */
-
-    ERROR1:
-      kfree(data);
-    ERROR0:
-      return err;
-  }
-
-
-Removing the client (Legacy model)
-==================================
-
-The detach_client call back function is called when a client should be
-removed. It may actually fail, but only when panicking. This code is
-much simpler than the attachment code, fortunately!
-
-  int foo_detach_client(struct i2c_client *client)
-  {
-    int err;
-
-    /* Try to detach the client from i2c space */
-    if ((err = i2c_detach_client(client)))
-      return err;
-
-    kfree(i2c_get_clientdata(client));
-    return 0;
-  }
-
-
-Initializing the module or kernel
-=================================
-
-When the kernel is booted, or when your foo driver module is inserted, 
-you have to do some initializing. Fortunately, just attaching (registering)
-the driver module is usually enough.
-
-  static int __init foo_init(void)
-  {
-    int res;
-    
-    if ((res = i2c_add_driver(&foo_driver))) {
-      printk("foo: Driver registration failed, module not inserted.\n");
-      return res;
-    }
-    return 0;
-  }
-
-  static void __exit foo_cleanup(void)
-  {
-    i2c_del_driver(&foo_driver);
-  }
-
-  /* Substitute your own name and email address */
-  MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"
-  MODULE_DESCRIPTION("Driver for Barf Inc. Foo I2C devices");
-
-  /* a few non-GPL license types are also allowed */
-  MODULE_LICENSE("GPL");
-
-  module_init(foo_init);
-  module_exit(foo_cleanup);
-
-Note that some functions are marked by `__init', and some data structures
-by `__initdata'.  These functions and structures can be removed after
-kernel booting (or module loading) is completed.
+Note that some functions are marked by `__init'.  These functions can
+be removed after kernel booting (or module loading) is completed.
+Likewise, functions marked by `__exit' are dropped by the compiler when
+the code is built into the kernel, as they would never be called.
 
 
 Power Management
@@ -548,33 +293,35 @@
 
 A generic ioctl-like function call back is supported. You will seldom
 need this, and its use is deprecated anyway, so newer design should not
-use it. Set it to NULL.
+use it.
 
 
 Sending and receiving
 =====================
 
 If you want to communicate with your device, there are several functions
-to do this. You can find all of them in i2c.h.
+to do this. You can find all of them in <linux/i2c.h>.
 
-If you can choose between plain i2c communication and SMBus level
-communication, please use the last. All adapters understand SMBus level
-commands, but only some of them understand plain i2c!
+If you can choose between plain I2C communication and SMBus level
+communication, please use the latter. All adapters understand SMBus level
+commands, but only some of them understand plain I2C!
 
 
-Plain i2c communication
+Plain I2C communication
 -----------------------
 
-  extern int i2c_master_send(struct i2c_client *,const char* ,int);
-  extern int i2c_master_recv(struct i2c_client *,char* ,int);
+	int i2c_master_send(struct i2c_client *client, const char *buf,
+			    int count);
+	int i2c_master_recv(struct i2c_client *client, char *buf, int count);
 
 These routines read and write some bytes from/to a client. The client
 contains the i2c address, so you do not have to include it. The second
-parameter contains the bytes the read/write, the third the length of the
-buffer. Returned is the actual number of bytes read/written.
-  
-  extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msg,
-                          int num);
+parameter contains the bytes to read/write, the third the number of bytes
+to read/write (must be less than the length of the buffer.) Returned is
+the actual number of bytes read/written.
+
+	int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msg,
+			 int num);
 
 This sends a series of messages. Each message can be a read or write,
 and they can be mixed in any way. The transactions are combined: no
@@ -583,49 +330,45 @@
 and the message data itself.
 
 You can read the file `i2c-protocol' for more information about the
-actual i2c protocol.
+actual I2C protocol.
 
 
 SMBus communication
 -------------------
 
-  extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, 
-                             unsigned short flags,
-                             char read_write, u8 command, int size,
-                             union i2c_smbus_data * data);
+	s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+			   unsigned short flags, char read_write, u8 command,
+			   int size, union i2c_smbus_data *data);
 
-  This is the generic SMBus function. All functions below are implemented
-  in terms of it. Never use this function directly!
+This is the generic SMBus function. All functions below are implemented
+in terms of it. Never use this function directly!
 
-
-  extern s32 i2c_smbus_read_byte(struct i2c_client * client);
-  extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value);
-  extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command);
-  extern s32 i2c_smbus_write_byte_data(struct i2c_client * client,
-                                       u8 command, u8 value);
-  extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command);
-  extern s32 i2c_smbus_write_word_data(struct i2c_client * client,
-                                       u8 command, u16 value);
-  extern s32 i2c_smbus_process_call(struct i2c_client *client,
-                                    u8 command, u16 value);
-  extern s32 i2c_smbus_read_block_data(struct i2c_client * client,
-                                       u8 command, u8 *values);
-  extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
-                                        u8 command, u8 length,
-                                        u8 *values);
-  extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
-                                           u8 command, u8 length, u8 *values);
-  extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
-                                            u8 command, u8 length,
-                                            u8 *values);
+	s32 i2c_smbus_read_byte(struct i2c_client *client);
+	s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value);
+	s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command);
+	s32 i2c_smbus_write_byte_data(struct i2c_client *client,
+				      u8 command, u8 value);
+	s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command);
+	s32 i2c_smbus_write_word_data(struct i2c_client *client,
+				      u8 command, u16 value);
+	s32 i2c_smbus_process_call(struct i2c_client *client,
+				   u8 command, u16 value);
+	s32 i2c_smbus_read_block_data(struct i2c_client *client,
+				      u8 command, u8 *values);
+	s32 i2c_smbus_write_block_data(struct i2c_client *client,
+				       u8 command, u8 length, const u8 *values);
+	s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client,
+					  u8 command, u8 length, u8 *values);
+	s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client,
+					   u8 command, u8 length,
+					   const u8 *values);
 
 These ones were removed from i2c-core because they had no users, but could
 be added back later if needed:
 
-  extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value);
-  extern s32 i2c_smbus_block_process_call(struct i2c_client *client,
-                                          u8 command, u8 length,
-                                          u8 *values)
+	s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value);
+	s32 i2c_smbus_block_process_call(struct i2c_client *client,
+					 u8 command, u8 length, u8 *values);
 
 All these transactions return a negative errno value on failure. The 'write'
 transactions return 0 on success; the 'read' transactions return the read
@@ -642,7 +385,5 @@
 Below all general purpose routines are listed, that were not mentioned
 before.
 
-  /* This call returns a unique low identifier for each registered adapter.
-   */
-  extern int i2c_adapter_id(struct i2c_adapter *adap);
-
+	/* Return the adapter number for a specific adapter */
+	int i2c_adapter_id(struct i2c_adapter *adap);
diff --git a/Documentation/ia64/xen.txt b/Documentation/ia64/xen.txt
new file mode 100644
index 0000000..c61a99f
--- /dev/null
+++ b/Documentation/ia64/xen.txt
@@ -0,0 +1,183 @@
+       Recipe for getting/building/running Xen/ia64 with pv_ops
+       --------------------------------------------------------
+
+This recipe describes how to get xen-ia64 source and build it,
+and run domU with pv_ops.
+
+============
+Requirements
+============
+
+  - python
+  - mercurial
+    it (aka "hg") is an open-source source code
+    management software. See the below.
+    http://www.selenic.com/mercurial/wiki/
+  - git
+  - bridge-utils
+
+=================================
+Getting and Building Xen and Dom0
+=================================
+
+  My environment is;
+    Machine  : Tiger4
+    Domain0 OS  : RHEL5
+    DomainU OS  : RHEL5
+
+ 1. Download source
+    # hg clone http://xenbits.xensource.com/ext/ia64/xen-unstable.hg
+    # cd xen-unstable.hg
+    # hg clone http://xenbits.xensource.com/ext/ia64/linux-2.6.18-xen.hg
+
+ 2. # make world
+
+ 3. # make install-tools
+
+ 4. copy kernels and xen
+    # cp xen/xen.gz /boot/efi/efi/redhat/
+    # cp build-linux-2.6.18-xen_ia64/vmlinux.gz \
+      /boot/efi/efi/redhat/vmlinuz-2.6.18.8-xen
+
+ 5. make initrd for Dom0/DomU
+    # make -C linux-2.6.18-xen.hg ARCH=ia64 modules_install \
+      O=$(/bin/pwd)/build-linux-2.6.18-xen_ia64
+    # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6.18.8-xen.img \
+      2.6.18.8-xen --builtin mptspi --builtin mptbase \
+      --builtin mptscsih --builtin uhci-hcd --builtin ohci-hcd \
+      --builtin ehci-hcd
+
+================================
+Making a disk image for guest OS
+================================
+
+ 1. make file
+    # dd if=/dev/zero of=/root/rhel5.img bs=1M seek=4096 count=0
+    # mke2fs -F -j /root/rhel5.img
+    # mount -o loop /root/rhel5.img /mnt
+    # cp -ax /{dev,var,etc,usr,bin,sbin,lib} /mnt
+    # mkdir /mnt/{root,proc,sys,home,tmp}
+
+    Note: You may miss some device files. If so, please create them
+    with mknod. Or you can use tar instead of cp.
+
+ 2. modify DomU's fstab
+    # vi /mnt/etc/fstab
+       /dev/xvda1  /            ext3    defaults        1 1
+       none        /dev/pts     devpts  gid=5,mode=620  0 0
+       none        /dev/shm     tmpfs   defaults        0 0
+       none        /proc        proc    defaults        0 0
+       none        /sys         sysfs   defaults        0 0
+
+ 3. modify inittab
+    set runlevel to 3 to avoid X trying to start
+    # vi /mnt/etc/inittab
+       id:3:initdefault:
+    Start a getty on the hvc0 console
+       X0:2345:respawn:/sbin/mingetty hvc0
+    tty1-6 mingetty can be commented out
+
+ 4. add hvc0 into /etc/securetty
+    # vi /mnt/etc/securetty (add hvc0)
+
+ 5. umount
+    # umount /mnt
+
+FYI, virt-manager can also make a disk image for guest OS.
+It's GUI tools and easy to make it.
+
+==================
+Boot Xen & Domain0
+==================
+
+ 1. replace elilo
+    elilo of RHEL5 can boot Xen and Dom0.
+    If you use old elilo (e.g RHEL4), please download from the below
+    http://elilo.sourceforge.net/cgi-bin/blosxom
+    and copy into /boot/efi/efi/redhat/
+    # cp elilo-3.6-ia64.efi /boot/efi/efi/redhat/elilo.efi
+
+ 2. modify elilo.conf (like the below)
+    # vi /boot/efi/efi/redhat/elilo.conf
+     prompt
+     timeout=20
+     default=xen
+     relocatable
+
+     image=vmlinuz-2.6.18.8-xen
+             label=xen
+             vmm=xen.gz
+             initrd=initrd-2.6.18.8-xen.img
+             read-only
+             append=" -- rhgb root=/dev/sda2"
+
+The append options before "--" are for xen hypervisor,
+the options after "--" are for dom0.
+
+FYI, your machine may need console options like
+"com1=19200,8n1 console=vga,com1". For example,
+append="com1=19200,8n1 console=vga,com1 -- rhgb console=tty0 \
+console=ttyS0 root=/dev/sda2"
+
+=====================================
+Getting and Building domU with pv_ops
+=====================================
+
+ 1. get pv_ops tree
+    # git clone http://people.valinux.co.jp/~yamahata/xen-ia64/linux-2.6-xen-ia64.git/
+
+ 2. git branch (if necessary)
+    # cd linux-2.6-xen-ia64/
+    # git checkout -b your_branch origin/xen-ia64-domu-minimal-2008may19
+    (Note: The current branch is xen-ia64-domu-minimal-2008may19.
+    But you would find the new branch. You can see with
+    "git branch -r" to get the branch lists.
+    http://people.valinux.co.jp/~yamahata/xen-ia64/for_eagl/linux-2.6-ia64-pv-ops.git/
+    is also available. The tree is based on
+    git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 test)
+
+
+ 3. copy .config for pv_ops of domU
+    # cp arch/ia64/configs/xen_domu_wip_defconfig .config
+
+ 4. make kernel with pv_ops
+    # make oldconfig
+    # make
+
+ 5. install the kernel and initrd
+    # cp vmlinux.gz /boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU
+    # make modules_install
+    # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img \
+      2.6.26-rc3xen-ia64-08941-g1b12161 --builtin mptspi \
+      --builtin mptbase --builtin mptscsih --builtin uhci-hcd \
+      --builtin ohci-hcd --builtin ehci-hcd
+
+========================
+Boot DomainU with pv_ops
+========================
+
+ 1. make config of DomU
+   # vi /etc/xen/rhel5
+     kernel = "/boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU"
+     ramdisk = "/boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img"
+     vcpus = 1
+     memory = 512
+     name = "rhel5"
+     disk = [ 'file:/root/rhel5.img,xvda1,w' ]
+     root = "/dev/xvda1 ro"
+     extra= "rhgb console=hvc0"
+
+ 2. After boot xen and dom0, start xend
+   # /etc/init.d/xend start
+   ( In the debugging case, # XEND_DEBUG=1 xend trace_start )
+
+ 3. start domU
+   # xm create -c rhel5
+
+=========
+Reference
+=========
+- Wiki of Xen/IA64 upstream merge
+  http://wiki.xensource.com/xenwiki/XenIA64/UpstreamMerge
+
+Written by Akio Takebe <takebe_akio@jp.fujitsu.com> on 28 May 2008
diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt
new file mode 100644
index 0000000..a10c3b6
--- /dev/null
+++ b/Documentation/input/elantech.txt
@@ -0,0 +1,405 @@
+Elantech Touchpad Driver
+========================
+
+	Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net>
+
+	Extra information for hardware version 1 found and
+	provided by Steve Havelka
+
+	Version 2 (EeePC) hardware support based on patches
+	received from Woody at Xandros and forwarded to me
+	by user StewieGriffin at the eeeuser.com forum
+
+
+Contents
+~~~~~~~~
+
+ 1. Introduction
+ 2. Extra knobs
+ 3. Hardware version 1
+    3.1 Registers
+    3.2 Native relative mode 4 byte packet format
+    3.3 Native absolute mode 4 byte packet format
+ 4. Hardware version 2
+    4.1 Registers
+    4.2 Native absolute mode 6 byte packet format
+        4.2.1 One finger touch
+        4.2.2 Two finger touch
+
+
+
+1. Introduction
+   ~~~~~~~~~~~~
+
+Currently the Linux Elantech touchpad driver is aware of two different
+hardware versions unimaginatively called version 1 and version 2. Version 1
+is found in "older" laptops and uses 4 bytes per packet. Version 2 seems to
+be introduced with the EeePC and uses 6 bytes per packet.
+
+The driver tries to support both hardware versions and should be compatible
+with the Xorg Synaptics touchpad driver and its graphical configuration
+utilities.
+
+Additionally the operation of the touchpad can be altered by adjusting the
+contents of some of its internal registers. These registers are represented
+by the driver as sysfs entries under /sys/bus/serio/drivers/psmouse/serio?
+that can be read from and written to.
+
+Currently only the registers for hardware version 1 are somewhat understood.
+Hardware version 2 seems to use some of the same registers but it is not
+known whether the bits in the registers represent the same thing or might
+have changed their meaning.
+
+On top of that, some register settings have effect only when the touchpad is
+in relative mode and not in absolute mode. As the Linux Elantech touchpad
+driver always puts the hardware into absolute mode not all information
+mentioned below can be used immediately. But because there is no freely
+available Elantech documentation the information is provided here anyway for
+completeness sake.
+
+
+/////////////////////////////////////////////////////////////////////////////
+
+
+2. Extra knobs
+   ~~~~~~~~~~~
+
+Currently the Linux Elantech touchpad driver provides two extra knobs under
+/sys/bus/serio/drivers/psmouse/serio? for the user.
+
+* debug
+
+   Turn different levels of debugging ON or OFF.
+
+   By echoing "0" to this file all debugging will be turned OFF.
+
+   Currently a value of "1" will turn on some basic debugging and a value of
+   "2" will turn on packet debugging. For hardware version 1 the default is
+   OFF. For version 2 the default is "1".
+
+   Turning packet debugging on will make the driver dump every packet
+   received to the syslog before processing it. Be warned that this can
+   generate quite a lot of data!
+
+* paritycheck
+
+   Turns parity checking ON or OFF.
+
+   By echoing "0" to this file parity checking will be turned OFF. Any
+   non-zero value will turn it ON. For hardware version 1 the default is ON.
+   For version 2 the default it is OFF.
+
+   Hardware version 1 provides basic data integrity verification by
+   calculating a parity bit for the last 3 bytes of each packet. The driver
+   can check these bits and reject any packet that appears corrupted. Using
+   this knob you can bypass that check.
+
+   It is not known yet whether hardware version 2 provides the same parity
+   bits. Hence checking is disabled by default. Currently even turning it on
+   will do nothing.
+
+
+/////////////////////////////////////////////////////////////////////////////
+
+
+3. Hardware version 1
+   ==================
+
+3.1 Registers
+    ~~~~~~~~~
+
+By echoing a hexadecimal value to a register it contents can be altered.
+
+For example:
+
+   echo -n 0x16 > reg_10
+
+* reg_10
+
+   bit   7   6   5   4   3   2   1   0
+         B   C   T   D   L   A   S   E
+
+         E: 1 = enable smart edges unconditionally
+         S: 1 = enable smart edges only when dragging
+         A: 1 = absolute mode (needs 4 byte packets, see reg_11)
+         L: 1 = enable drag lock (see reg_22)
+         D: 1 = disable dynamic resolution
+         T: 1 = disable tapping
+         C: 1 = enable corner tap
+         B: 1 = swap left and right button
+
+* reg_11
+
+   bit   7   6   5   4   3   2   1   0
+         1   0   0   H   V   1   F   P
+
+         P: 1 = enable parity checking for relative mode
+         F: 1 = enable native 4 byte packet mode
+         V: 1 = enable vertical scroll area
+         H: 1 = enable horizontal scroll area
+
+* reg_20
+
+         single finger width?
+
+* reg_21
+
+         scroll area width (small: 0x40 ... wide: 0xff)
+
+* reg_22
+
+         drag lock time out (short: 0x14 ... long: 0xfe;
+                             0xff = tap again to release)
+
+* reg_23
+
+         tap make timeout?
+
+* reg_24
+
+         tap release timeout?
+
+* reg_25
+
+         smart edge cursor speed (0x02 = slow, 0x03 = medium, 0x04 = fast)
+
+* reg_26
+
+         smart edge activation area width?
+
+
+3.2 Native relative mode 4 byte packet format
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+byte 0:
+   bit   7   6   5   4   3   2   1   0
+         c   c  p2  p1   1   M   R   L
+
+         L, R, M = 1 when Left, Right, Middle mouse button pressed
+            some models have M as byte 3 odd parity bit
+         when parity checking is enabled (reg_11, P = 1):
+            p1..p2 = byte 1 and 2 odd parity bit
+         c = 1 when corner tap detected
+
+byte 1:
+   bit   7   6   5   4   3   2   1   0
+        dx7 dx6 dx5 dx4 dx3 dx2 dx1 dx0
+
+         dx7..dx0 = x movement;   positive = right, negative = left
+         byte 1 = 0xf0 when corner tap detected
+
+byte 2:
+   bit   7   6   5   4   3   2   1   0
+        dy7 dy6 dy5 dy4 dy3 dy2 dy1 dy0
+
+         dy7..dy0 = y movement;   positive = up,    negative = down
+
+byte 3:
+   parity checking enabled (reg_11, P = 1):
+
+      bit   7   6   5   4   3   2   1   0
+            w   h  n1  n0  ds3 ds2 ds1 ds0
+
+            normally:
+               ds3..ds0 = scroll wheel amount and direction
+                          positive = down or left
+                          negative = up or right
+            when corner tap detected:
+               ds0 = 1 when top right corner tapped
+               ds1 = 1 when bottom right corner tapped
+               ds2 = 1 when bottom left corner tapped
+               ds3 = 1 when top left corner tapped
+            n1..n0 = number of fingers on touchpad
+               only models with firmware 2.x report this, models with
+               firmware 1.x seem to map one, two and three finger taps
+               directly to L, M and R mouse buttons
+            h = 1 when horizontal scroll action
+            w = 1 when wide finger touch?
+
+   otherwise (reg_11, P = 0):
+
+      bit   7   6   5   4   3   2   1   0
+           ds7 ds6 ds5 ds4 ds3 ds2 ds1 ds0
+
+            ds7..ds0 = vertical scroll amount and direction
+                       negative = up
+                       positive = down
+
+
+3.3 Native absolute mode 4 byte packet format
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+byte 0:
+   firmware version 1.x:
+
+      bit   7   6   5   4   3   2   1   0
+            D   U  p1  p2   1  p3   R   L
+
+            L, R = 1 when Left, Right mouse button pressed
+            p1..p3 = byte 1..3 odd parity bit
+            D, U = 1 when rocker switch pressed Up, Down
+
+   firmware version 2.x:
+
+      bit   7   6   5   4   3   2   1   0
+           n1  n0  p2  p1   1  p3   R   L
+
+            L, R = 1 when Left, Right mouse button pressed
+            p1..p3 = byte 1..3 odd parity bit
+            n1..n0 = number of fingers on touchpad
+
+byte 1:
+   firmware version 1.x:
+
+      bit   7   6   5   4   3   2   1   0
+            f   0  th  tw  x9  x8  y9  y8
+
+            tw = 1 when two finger touch
+            th = 1 when three finger touch
+            f  = 1 when finger touch
+
+   firmware version 2.x:
+
+      bit   7   6   5   4   3   2   1   0
+            .   .   .   .  x9  x8  y9  y8
+
+byte 2:
+   bit   7   6   5   4   3   2   1   0
+        x7  x6  x5  x4  x3  x2  x1  x0
+
+         x9..x0 = absolute x value (horizontal)
+
+byte 3:
+   bit   7   6   5   4   3   2   1   0
+        y7  y6  y5  y4  y3  y2  y1  y0
+
+         y9..y0 = absolute y value (vertical)
+
+
+/////////////////////////////////////////////////////////////////////////////
+
+
+4. Hardware version 2
+   ==================
+
+
+4.1 Registers
+    ~~~~~~~~~
+
+By echoing a hexadecimal value to a register it contents can be altered.
+
+For example:
+
+   echo -n 0x56 > reg_10
+
+* reg_10
+
+   bit   7   6   5   4   3   2   1   0
+         0   1   0   1   0   1   D   0
+
+         D: 1 = enable drag and drop
+
+* reg_11
+
+   bit   7   6   5   4   3   2   1   0
+         1   0   0   0   S   0   1   0
+
+         S: 1 = enable vertical scroll
+
+* reg_21
+
+         unknown (0x00)
+
+* reg_22
+
+         drag and drop release time out (short: 0x70 ... long 0x7e;
+                                   0x7f = never i.e. tap again to release)
+
+
+4.2 Native absolute mode 6 byte packet format
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+4.2.1 One finger touch
+      ~~~~~~~~~~~~~~~~
+
+byte 0:
+
+   bit   7   6   5   4   3   2   1   0
+        n1  n0   .   .   .   .   R   L
+
+         L, R = 1 when Left, Right mouse button pressed
+         n1..n0 = numbers of fingers on touchpad
+
+byte 1:
+
+   bit   7   6   5   4   3   2   1   0
+        x15 x14 x13 x12 x11 x10 x9  x8
+
+byte 2:
+
+   bit   7   6   5   4   3   2   1   0
+        x7  x6  x5  x4  x4  x2  x1  x0
+
+         x15..x0 = absolute x value (horizontal)
+
+byte 3:
+
+   bit   7   6   5   4   3   2   1   0
+         .   .   .   .   .   .   .   .
+
+byte 4:
+
+   bit   7   6   5   4   3   2   1   0
+        y15 y14 y13 y12 y11 y10 y8  y8
+
+byte 5:
+
+   bit   7   6   5   4   3   2   1   0
+        y7  y6  y5  y4  y3  y2  y1  y0
+
+         y15..y0 = absolute y value (vertical)
+
+
+4.2.2 Two finger touch
+      ~~~~~~~~~~~~~~~~
+
+byte 0:
+
+   bit   7   6   5   4   3   2   1   0
+        n1  n0  ay8 ax8  .   .   R   L
+
+         L, R = 1 when Left, Right mouse button pressed
+         n1..n0 = numbers of fingers on touchpad
+
+byte 1:
+
+   bit   7   6   5   4   3   2   1   0
+        ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
+
+         ax8..ax0 = first finger absolute x value
+
+byte 2:
+
+   bit   7   6   5   4   3   2   1   0
+        ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0
+
+         ay8..ay0 = first finger absolute y value
+
+byte 3:
+
+   bit   7   6   5   4   3   2   1   0
+         .   .  by8 bx8  .   .   .   .
+
+byte 4:
+
+   bit   7   6   5   4   3   2   1   0
+        bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0
+
+         bx8..bx0 = second finger absolute x value
+
+byte 5:
+
+   bit   7   6   5   4   3   2   1   0
+        by7 by8 by5 by4 by3 by2 by1 by0
+
+         by8..by0 = second finger absolute y value
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 0705040..3f4bc84 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -109,7 +109,8 @@
 2) Or use the system kernel binary itself as dump-capture kernel and there is
    no need to build a separate dump-capture kernel. This is possible
    only with the architecutres which support a relocatable kernel. As
-   of today, i386, x86_64 and ia64 architectures support relocatable kernel.
+   of today, i386, x86_64, ppc64 and ia64 architectures support relocatable
+   kernel.
 
 Building a relocatable kernel is advantageous from the point of view that
 one does not have to build a second kernel for capturing the dump. But
@@ -207,8 +208,15 @@
 Dump-capture kernel config options (Arch Dependent, ppc64)
 ----------------------------------------------------------
 
-*  Make and install the kernel and its modules. DO NOT add this kernel
-   to the boot loader configuration files.
+1) Enable "Build a kdump crash kernel" support under "Kernel" options:
+
+   CONFIG_CRASH_DUMP=y
+
+2)   Enable "Build a relocatable kernel" support
+
+   CONFIG_RELOCATABLE=y
+
+   Make and install the kernel and its modules.
 
 Dump-capture kernel config options (Arch Dependent, ia64)
 ----------------------------------------------------------
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 53ba7c7..343e0f0 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -218,20 +218,47 @@
 	acpi.debug_level=	[HW,ACPI]
 			Format: <int>
 			Each bit of the <int> indicates an ACPI debug level,
-			1: enable, 0: disable. It is useful for boot time
-			debugging. After system has booted up, it can be set
-			via /sys/module/acpi/parameters/debug_level.
-			CONFIG_ACPI_DEBUG must be enabled for this to produce any output.
-			Available bits (add the numbers together) to enable different
-			debug output levels of the ACPI subsystem:
-			0x01 error 0x02 warn 0x04 init 0x08 debug object
-			0x10 info 0x20 init names 0x40 parse 0x80 load
-			0x100 dispatch 0x200 execute 0x400 names 0x800 operation region
-			0x1000 bfield 0x2000 tables 0x4000 values 0x8000 objects
-			0x10000 resources 0x20000 user requests 0x40000 package.
-			The number can be in decimal or prefixed with 0x in hex.
-			Warning: Many of these options can produce a lot of
-			output and make your system unusable. Be very careful.
+			which corresponds to the level in an ACPI_DEBUG_PRINT
+			statement.  After system has booted up, this mask
+			can be set via /sys/module/acpi/parameters/debug_level.
+
+			CONFIG_ACPI_DEBUG must be enabled for this to produce
+			any output.  The number can be in decimal or prefixed
+			with 0x in hex.  Some of these options produce so much
+			output that the system is unusable.
+
+			The following global components are defined by the
+			ACPI CA:
+			       0x01 error
+			       0x02 warn
+			       0x04 init
+			       0x08 debug object
+			       0x10 info
+			       0x20 init names
+			       0x40 parse
+			       0x80 load
+			      0x100 dispatch
+			      0x200 execute
+			      0x400 names
+			      0x800 operation region
+			     0x1000 bfield
+			     0x2000 tables
+			     0x4000 values
+			     0x8000 objects
+			    0x10000 resources
+			    0x20000 user requests
+			    0x40000 package
+ 			The number can be in decimal or prefixed with 0x in hex.
+ 			Warning: Many of these options can produce a lot of
+ 			output and make your system unusable. Be very careful.
+
+ 	acpi.power_nocheck=	[HW,ACPI]
+ 			Format: 1/0 enable/disable the check of power state.
+ 			On some bogus BIOS the _PSC object/_STA object of
+ 			power resource can't return the correct device power
+ 			state. In such case it is unneccessary to check its
+ 			power state again in power transition.
+ 			1 : disable the power state check
 
 	acpi_pm_good	[X86-32,X86-64]
 			Override the pmtimer bug detection: force the kernel
@@ -1711,6 +1738,10 @@
 			Override pmtimer IOPort with a hex value.
 			e.g. pmtmr=0x508
 
+	pnp.debug	[PNP]
+			Enable PNP debug messages.  This depends on the
+			CONFIG_PNP_DEBUG_MESSAGES option.
+
 	pnpacpi=	[ACPI]
 			{ off }
 
@@ -2208,7 +2239,7 @@
 
 	thermal.crt=	[HW,ACPI]
 			-1: disable all critical trip points in all thermal zones
-			<degrees C>: lower all critical trip points
+			<degrees C>: override all critical trip points
 
 	thermal.nocrt=	[HW,ACPI]
 			Set to disable actions on ACPI thermal zone
diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt
index 69b5dd4..2b3a6b5 100644
--- a/Documentation/laptops/acer-wmi.txt
+++ b/Documentation/laptops/acer-wmi.txt
@@ -1,7 +1,7 @@
 Acer Laptop WMI Extras Driver
 http://code.google.com/p/aceracpi
-Version 0.1
-9th February 2008
+Version 0.2
+18th August 2008
 
 Copyright 2007-2008 Carlos Corbacho <carlos@strangeworlds.co.uk>
 
@@ -87,17 +87,7 @@
 ever wish to remove the card, or swap it out at some point, please get in touch
 with me, as we may well be able to gain some data on wireless card detection.
 
-To read the status of the wireless radio (0=off, 1=on):
-cat /sys/devices/platform/acer-wmi/wireless
-
-To enable the wireless radio:
-echo 1 > /sys/devices/platform/acer-wmi/wireless
-
-To disable the wireless radio:
-echo 0 > /sys/devices/platform/acer-wmi/wireless
-
-To set the state of the wireless radio when loading acer-wmi, pass:
-wireless=X (where X is 0 or 1)
+The wireless radio is exposed through rfkill.
 
 Bluetooth
 *********
@@ -117,17 +107,7 @@
 module off the internet that is compatible with your laptop and fit it, then
 it will work just fine with acer-wmi.
 
-To read the status of the bluetooth module (0=off, 1=on):
-cat /sys/devices/platform/acer-wmi/wireless
-
-To enable the bluetooth module:
-echo 1 > /sys/devices/platform/acer-wmi/bluetooth
-
-To disable the bluetooth module:
-echo 0 > /sys/devices/platform/acer-wmi/bluetooth
-
-To set the state of the bluetooth module when loading acer-wmi, pass:
-bluetooth=X (where X is 0 or 1)
+Bluetooth is exposed through rfkill.
 
 3G
 **
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index de4063c..02ea9a9 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1917,6 +1917,8 @@
 			inverse clock polarity (CPOL) mode
     - spi-cpha        - (optional) Empty property indicating device requires
 			shifted clock phase (CPHA) mode
+    - spi-cs-high     - (optional) Empty property indicating device requires
+			chip select active high
 
     SPI example for an MPC5200 SPI bus:
 		spi@f00 {
diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt
index 74ae6f1..81a917e 100644
--- a/Documentation/powerpc/dts-bindings/fsl/board.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/board.txt
@@ -2,13 +2,13 @@
 
 Required properties:
 
- - device_type : Should be "board-control"
+ - compatible : Should be "fsl,<board>-bcsr"
  - reg : Offset and length of the register set for the device
 
 Example:
 
 	bcsr@f8000000 {
-		device_type = "board-control";
+		compatible = "fsl,mpc8360mds-bcsr";
 		reg = <f8000000 8000>;
 	};
 
diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt
new file mode 100644
index 0000000..4c3d62c
--- /dev/null
+++ b/Documentation/usb/WUSB-Design-overview.txt
@@ -0,0 +1,448 @@
+
+Linux UWB + Wireless USB + WiNET
+
+   (C) 2005-2006 Intel Corporation
+   Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License version
+   2 as published by the Free Software Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+   02110-1301, USA.
+
+
+Please visit http://bughost.org/thewiki/Design-overview.txt-1.8 for
+updated content.
+
+    * Design-overview.txt-1.8
+
+This code implements a Ultra Wide Band stack for Linux, as well as
+drivers for the the USB based UWB radio controllers defined in the
+Wireless USB 1.0 specification (including Wireless USB host controller
+and an Intel WiNET controller).
+
+   1. Introduction
+         1. HWA: Host Wire adapters, your Wireless USB dongle
+
+         2. DWA: Device Wired Adaptor, a Wireless USB hub for wired
+            devices
+         3. WHCI: Wireless Host Controller Interface, the PCI WUSB host
+            adapter
+   2. The UWB stack
+         1. Devices and hosts: the basic structure
+
+         2. Host Controller life cycle
+
+         3. On the air: beacons and enumerating the radio neighborhood
+
+         4. Device lists
+         5. Bandwidth allocation
+
+   3. Wireless USB Host Controller drivers
+
+   4. Glossary
+
+
+    Introduction
+
+UWB is a wide-band communication protocol that is to serve also as the
+low-level protocol for others (much like TCP sits on IP). Currently
+these others are Wireless USB and TCP/IP, but seems Bluetooth and
+Firewire/1394 are coming along.
+
+UWB uses a band from roughly 3 to 10 GHz, transmitting at a max of
+~-41dB (or 0.074 uW/MHz--geography specific data is still being
+negotiated w/ regulators, so watch for changes). That band is divided in
+a bunch of ~1.5 GHz wide channels (or band groups) composed of three
+subbands/subchannels (528 MHz each). Each channel is independent of each
+other, so you could consider them different "busses". Initially this
+driver considers them all a single one.
+
+Radio time is divided in 65536 us long /superframes/, each one divided
+in 256 256us long /MASs/ (Media Allocation Slots), which are the basic
+time/media allocation units for transferring data. At the beginning of
+each superframe there is a Beacon Period (BP), where every device
+transmit its beacon on a single MAS. The length of the BP depends on how
+many devices are present and the length of their beacons.
+
+Devices have a MAC (fixed, 48 bit address) and a device (changeable, 16
+bit address) and send periodic beacons to advertise themselves and pass
+info on what they are and do. They advertise their capabilities and a
+bunch of other stuff.
+
+The different logical parts of this driver are:
+
+    *
+
+      *UWB*: the Ultra-Wide-Band stack -- manages the radio and
+      associated spectrum to allow for devices sharing it. Allows to
+      control bandwidth assingment, beaconing, scanning, etc
+
+    *
+
+      *WUSB*: the layer that sits on top of UWB to provide Wireless USB.
+      The Wireless USB spec defines means to control a UWB radio and to
+      do the actual WUSB.
+
+
+      HWA: Host Wire adapters, your Wireless USB dongle
+
+WUSB also defines a device called a Host Wire Adaptor (HWA), which in
+mere terms is a USB dongle that enables your PC to have UWB and Wireless
+USB. The Wireless USB Host Controller in a HWA looks to the host like a
+[Wireless] USB controller connected via USB (!)
+
+The HWA itself is broken in two or three main interfaces:
+
+    *
+
+      *RC*: Radio control -- this implements an interface to the
+      Ultra-Wide-Band radio controller. The driver for this implements a
+      USB-based UWB Radio Controller to the UWB stack.
+
+    *
+
+      *HC*: the wireless USB host controller. It looks like a USB host
+      whose root port is the radio and the WUSB devices connect to it.
+      To the system it looks like a separate USB host. The driver (will)
+      implement a USB host controller (similar to UHCI, OHCI or EHCI)
+      for which the root hub is the radio...To reiterate: it is a USB
+      controller that is connected via USB instead of PCI.
+
+    *
+
+      *WINET*: some HW provide a WiNET interface (IP over UWB). This
+      package provides a driver for it (it looks like a network
+      interface, winetX). The driver detects when there is a link up for
+      their type and kick into gear.
+
+
+      DWA: Device Wired Adaptor, a Wireless USB hub for wired devices
+
+These are the complement to HWAs. They are a USB host for connecting
+wired devices, but it is connected to your PC connected via Wireless
+USB. To the system it looks like yet another USB host. To the untrained
+eye, it looks like a hub that connects upstream wirelessly.
+
+We still offer no support for this; however, it should share a lot of
+code with the HWA-RC driver; there is a bunch of factorization work that
+has been done to support that in upcoming releases.
+
+
+      WHCI: Wireless Host Controller Interface, the PCI WUSB host adapter
+
+This is your usual PCI device that implements WHCI. Similar in concept
+to EHCI, it allows your wireless USB devices (including DWAs) to connect
+to your host via a PCI interface. As in the case of the HWA, it has a
+Radio Control interface and the WUSB Host Controller interface per se.
+
+There is still no driver support for this, but will be in upcoming
+releases.
+
+
+    The UWB stack
+
+The main mission of the UWB stack is to keep a tally of which devices
+are in radio proximity to allow drivers to connect to them. As well, it
+provides an API for controlling the local radio controllers (RCs from
+now on), such as to start/stop beaconing, scan, allocate bandwidth, etc.
+
+
+      Devices and hosts: the basic structure
+
+The main building block here is the UWB device (struct uwb_dev). For
+each device that pops up in radio presence (ie: the UWB host receives a
+beacon from it) you get a struct uwb_dev that will show up in
+/sys/class/uwb and in /sys/bus/uwb/devices.
+
+For each RC that is detected, a new struct uwb_rc is created. In turn, a
+RC is also a device, so they also show in /sys/class/uwb and
+/sys/bus/uwb/devices, but at the same time, only radio controllers show
+up in /sys/class/uwb_rc.
+
+    *
+
+      [*] The reason for RCs being also devices is that not only we can
+      see them while enumerating the system device tree, but also on the
+      radio (their beacons and stuff), so the handling has to be
+      likewise to that of a device.
+
+Each RC driver is implemented by a separate driver that plugs into the
+interface that the UWB stack provides through a struct uwb_rc_ops. The
+spec creators have been nice enough to make the message format the same
+for HWA and WHCI RCs, so the driver is really a very thin transport that
+moves the requests from the UWB API to the device [/uwb_rc_ops->cmd()/]
+and sends the replies and notifications back to the API
+[/uwb_rc_neh_grok()/]. Notifications are handled to the UWB daemon, that
+is chartered, among other things, to keep the tab of how the UWB radio
+neighborhood looks, creating and destroying devices as they show up or
+dissapear.
+
+Command execution is very simple: a command block is sent and a event
+block or reply is expected back. For sending/receiving command/events, a
+handle called /neh/ (Notification/Event Handle) is opened with
+/uwb_rc_neh_open()/.
+
+The HWA-RC (USB dongle) driver (drivers/uwb/hwa-rc.c) does this job for
+the USB connected HWA. Eventually, drivers/whci-rc.c will do the same
+for the PCI connected WHCI controller.
+
+
+      Host Controller life cycle
+
+So let's say we connect a dongle to the system: it is detected and
+firmware uploaded if needed [for Intel's i1480
+/drivers/uwb/ptc/usb.c:ptc_usb_probe()/] and then it is reenumerated.
+Now we have a real HWA device connected and
+/drivers/uwb/hwa-rc.c:hwarc_probe()/ picks it up, that will set up the
+Wire-Adaptor environment and then suck it into the UWB stack's vision of
+the world [/drivers/uwb/lc-rc.c:uwb_rc_add()/].
+
+    *
+
+      [*] The stack should put a new RC to scan for devices
+      [/uwb_rc_scan()/] so it finds what's available around and tries to
+      connect to them, but this is policy stuff and should be driven
+      from user space. As of now, the operator is expected to do it
+      manually; see the release notes for documentation on the procedure.
+
+When a dongle is disconnected, /drivers/uwb/hwa-rc.c:hwarc_disconnect()/
+takes time of tearing everything down safely (or not...).
+
+
+      On the air: beacons and enumerating the radio neighborhood
+
+So assuming we have devices and we have agreed for a channel to connect
+on (let's say 9), we put the new RC to beacon:
+
+    *
+
+            $ echo 9 0 > /sys/class/uwb_rc/uwb0/beacon
+
+Now it is visible. If there were other devices in the same radio channel
+and beacon group (that's what the zero is for), the dongle's radio
+control interface will send beacon notifications on its
+notification/event endpoint (NEEP). The beacon notifications are part of
+the event stream that is funneled into the API with
+/drivers/uwb/neh.c:uwb_rc_neh_grok()/ and delivered to the UWBD, the UWB
+daemon through a notification list.
+
+UWBD wakes up and scans the event list; finds a beacon and adds it to
+the BEACON CACHE (/uwb_beca/). If he receives a number of beacons from
+the same device, he considers it to be 'onair' and creates a new device
+[/drivers/uwb/lc-dev.c:uwbd_dev_onair()/]. Similarly, when no beacons
+are received in some time, the device is considered gone and wiped out
+[uwbd calls periodically /uwb/beacon.c:uwb_beca_purge()/ that will purge
+the beacon cache of dead devices].
+
+
+      Device lists
+
+All UWB devices are kept in the list of the struct bus_type uwb_bus.
+
+
+      Bandwidth allocation
+
+The UWB stack maintains a local copy of DRP availability through
+processing of incoming *DRP Availability Change* notifications. This
+local copy is currently used to present the current bandwidth
+availability to the user through the sysfs file
+/sys/class/uwb_rc/uwbx/bw_avail. In the future the bandwidth
+availability information will be used by the bandwidth reservation
+routines.
+
+The bandwidth reservation routines are in progress and are thus not
+present in the current release. When completed they will enable a user
+to initiate DRP reservation requests through interaction with sysfs. DRP
+reservation requests from remote UWB devices will also be handled. The
+bandwidth management done by the UWB stack will include callbacks to the
+higher layers will enable the higher layers to use the reservations upon
+completion. [Note: The bandwidth reservation work is in progress and
+subject to change.]
+
+
+    Wireless USB Host Controller drivers
+
+*WARNING* This section needs a lot of work!
+
+As explained above, there are three different types of HCs in the WUSB
+world: HWA-HC, DWA-HC and WHCI-HC.
+
+HWA-HC and DWA-HC share that they are Wire-Adapters (USB or WUSB
+connected controllers), and their transfer management system is almost
+identical. So is their notification delivery system.
+
+HWA-HC and WHCI-HC share that they are both WUSB host controllers, so
+they have to deal with WUSB device life cycle and maintenance, wireless
+root-hub
+
+HWA exposes a Host Controller interface (HWA-HC 0xe0/02/02). This has
+three endpoints (Notifications, Data Transfer In and Data Transfer
+Out--known as NEP, DTI and DTO in the code).
+
+We reserve UWB bandwidth for our Wireless USB Cluster, create a Cluster
+ID and tell the HC to use all that. Then we start it. This means the HC
+starts sending MMCs.
+
+    *
+
+      The MMCs are blocks of data defined somewhere in the WUSB1.0 spec
+      that define a stream in the UWB channel time allocated for sending
+      WUSB IEs (host to device commands/notifications) and Device
+      Notifications (device initiated to host). Each host defines a
+      unique Wireless USB cluster through MMCs. Devices can connect to a
+      single cluster at the time. The IEs are Information Elements, and
+      among them are the bandwidth allocations that tell each device
+      when can they transmit or receive.
+
+Now it all depends on external stimuli.
+
+*New device connection*
+
+A new device pops up, it scans the radio looking for MMCs that give out
+the existence of Wireless USB channels. Once one (or more) are found,
+selects which one to connect to. Sends a /DN_Connect/ (device
+notification connect) during the DNTS (Device Notification Time
+Slot--announced in the MMCs
+
+HC picks the /DN_Connect/ out (nep module sends to notif.c for delivery
+into /devconnect/). This process starts the authentication process for
+the device. First we allocate a /fake port/ and assign an
+unauthenticated address (128 to 255--what we really do is
+0x80 | fake_port_idx). We fiddle with the fake port status and /khubd/
+sees a new connection, so he moves on to enable the fake port with a reset.
+
+So now we are in the reset path -- we know we have a non-yet enumerated
+device with an unauthorized address; we ask user space to authenticate
+(FIXME: not yet done, similar to bluetooth pairing), then we do the key
+exchange (FIXME: not yet done) and issue a /set address 0/ to bring the
+device to the default state. Device is authenticated.
+
+From here, the USB stack takes control through the usb_hcd ops. khubd
+has seen the port status changes, as we have been toggling them. It will
+start enumerating and doing transfers through usb_hcd->urb_enqueue() to
+read descriptors and move our data.
+
+*Device life cycle and keep alives*
+
+Everytime there is a succesful transfer to/from a device, we update a
+per-device activity timestamp. If not, every now and then we check and
+if the activity timestamp gets old, we ping the device by sending it a
+Keep Alive IE; it responds with a /DN_Alive/ pong during the DNTS (this
+arrives to us as a notification through
+devconnect.c:wusb_handle_dn_alive(). If a device times out, we
+disconnect it from the system (cleaning up internal information and
+toggling the bits in the fake hub port, which kicks khubd into removing
+the rest of the stuff).
+
+This is done through devconnect:__wusb_check_devs(), which will scan the
+device list looking for whom needs refreshing.
+
+If the device wants to disconnect, it will either die (ugly) or send a
+/DN_Disconnect/ that will prompt a disconnection from the system.
+
+*Sending and receiving data*
+
+Data is sent and received through /Remote Pipes/ (rpipes). An rpipe is
+/aimed/ at an endpoint in a WUSB device. This is the same for HWAs and
+DWAs.
+
+Each HC has a number of rpipes and buffers that can be assigned to them;
+when doing a data transfer (xfer), first the rpipe has to be aimed and
+prepared (buffers assigned), then we can start queueing requests for
+data in or out.
+
+Data buffers have to be segmented out before sending--so we send first a
+header (segment request) and then if there is any data, a data buffer
+immediately after to the DTI interface (yep, even the request). If our
+buffer is bigger than the max segment size, then we just do multiple
+requests.
+
+[This sucks, because doing USB scatter gatter in Linux is resource
+intensive, if any...not that the current approach is not. It just has to
+be cleaned up a lot :)].
+
+If reading, we don't send data buffers, just the segment headers saying
+we want to read segments.
+
+When the xfer is executed, we receive a notification that says data is
+ready in the DTI endpoint (handled through
+xfer.c:wa_handle_notif_xfer()). In there we read from the DTI endpoint a
+descriptor that gives us the status of the transfer, its identification
+(given when we issued it) and the segment number. If it was a data read,
+we issue another URB to read into the destination buffer the chunk of
+data coming out of the remote endpoint. Done, wait for the next guy. The
+callbacks for the URBs issued from here are the ones that will declare
+the xfer complete at some point and call it's callback.
+
+Seems simple, but the implementation is not trivial.
+
+    *
+
+      *WARNING* Old!!
+
+The main xfer descriptor, wa_xfer (equivalent to a URB) contains an
+array of segments, tallys on segments and buffers and callback
+information. Buried in there is a lot of URBs for executing the segments
+and buffer transfers.
+
+For OUT xfers, there is an array of segments, one URB for each, another
+one of buffer URB. When submitting, we submit URBs for segment request
+1, buffer 1, segment 2, buffer 2...etc. Then we wait on the DTI for xfer
+result data; when all the segments are complete, we call the callback to
+finalize the transfer.
+
+For IN xfers, we only issue URBs for the segments we want to read and
+then wait for the xfer result data.
+
+*URB mapping into xfers*
+
+This is done by hwahc_op_urb_[en|de]queue(). In enqueue() we aim an
+rpipe to the endpoint where we have to transmit, create a transfer
+context (wa_xfer) and submit it. When the xfer is done, our callback is
+called and we assign the status bits and release the xfer resources.
+
+In dequeue() we are basically cancelling/aborting the transfer. We issue
+a xfer abort request to the HC, cancell all the URBs we had submitted
+and not yet done and when all that is done, the xfer callback will be
+called--this will call the URB callback.
+
+
+    Glossary
+
+*DWA* -- Device Wire Adapter
+
+USB host, wired for downstream devices, upstream connects wirelessly
+with Wireless USB.
+
+*EVENT* -- Response to a command on the NEEP
+
+*HWA* -- Host Wire Adapter / USB dongle for UWB and Wireless USB
+
+*NEH* -- Notification/Event Handle
+
+Handle/file descriptor for receiving notifications or events. The WA
+code requires you to get one of this to listen for notifications or
+events on the NEEP.
+
+*NEEP* -- Notification/Event EndPoint
+
+Stuff related to the management of the first endpoint of a HWA USB
+dongle that is used to deliver an stream of events and notifications to
+the host.
+
+*NOTIFICATION* -- Message coming in the NEEP as response to something.
+
+*RC* -- Radio Control
+
+Design-overview.txt-1.8 (last edited 2006-11-04 12:22:24 by
+InakyPerezGonzalez)
+
diff --git a/Documentation/usb/wusb-cbaf b/Documentation/usb/wusb-cbaf
new file mode 100644
index 0000000..2e78b70
--- /dev/null
+++ b/Documentation/usb/wusb-cbaf
@@ -0,0 +1,139 @@
+#! /bin/bash
+#
+
+set -e
+
+progname=$(basename $0)
+function help
+{
+    cat <<EOF
+Usage: $progname COMMAND DEVICEs [ARGS]
+
+Command for manipulating the pairing/authentication credentials of a
+Wireless USB device that supports wired-mode Cable-Based-Association.
+
+Works in conjunction with the wusb-cba.ko driver from http://linuxuwb.org.
+
+
+DEVICE
+
+ sysfs path to the device to authenticate; for example, both this
+ guys are the same:
+
+ /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4:1.1
+ /sys/bus/usb/drivers/wusb-cbaf/1-4.4:1.1
+
+COMMAND/ARGS are
+
+ start
+
+   Start a WUSB host controller (by setting up a CHID)
+
+ set-chid DEVICE HOST-CHID HOST-BANDGROUP HOST-NAME
+
+   Sets host information in the device; after this you can call the
+   get-cdid to see how does this device report itself to us.
+
+ get-cdid DEVICE
+
+   Get the device ID associated to the HOST-CHDI we sent with
+   'set-chid'. We might not know about it.
+
+ set-cc DEVICE
+
+   If we allow the device to connect, set a random new CDID and CK
+   (connection key). Device saves them for the next time it wants to
+   connect wireless. We save them for that next time also so we can
+   authenticate the device (when we see the CDID he uses to id
+   itself) and the CK to crypto talk to it.
+
+CHID is always 16 hex bytes in 'XX YY ZZ...' form
+BANDGROUP is almost always 0001
+
+Examples:
+
+  You can default most arguments to '' to get a sane value:
+
+  $ $progname set-chid '' '' '' "My host name"
+
+  A full sequence:
+
+  $ $progname set-chid '' '' '' "My host name"
+  $ $progname get-cdid ''
+  $ $progname set-cc ''
+
+EOF
+}
+
+
+# Defaults
+# FIXME: CHID should come from a database :), band group from the host
+host_CHID="00 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff"
+host_band_group="0001"
+host_name=$(hostname)
+
+devs="$(echo /sys/bus/usb/drivers/wusb-cbaf/[0-9]*)"
+hdevs="$(for h in /sys/class/uwb_rc/*/wusbhc; do readlink -f $h; done)"
+
+result=0
+case $1 in
+    start)
+        for dev in ${2:-$hdevs}
+          do
+          uwb_rc=$(readlink -f $dev/uwb_rc)
+          if cat $uwb_rc/beacon | grep -q -- "-1"
+              then
+              echo 13 0 > $uwb_rc/beacon
+              echo I: started beaconing on ch 13 on $(basename $uwb_rc) >&2
+          fi
+          echo $host_CHID > $dev/wusb_chid
+          echo I: started host $(basename $dev) >&2
+        done
+        ;;
+    stop)
+        for dev in ${2:-$hdevs}
+          do
+          echo 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > $dev/wusb_chid
+          echo I: stopped host $(basename $dev) >&2
+          uwb_rc=$(readlink -f $dev/uwb_rc)
+          echo -1 | cat > $uwb_rc/beacon
+          echo I: stopped beaconing on $(basename $uwb_rc) >&2
+        done
+        ;;
+    set-chid)
+        shift
+        for dev in ${2:-$devs}; do
+            echo "${4:-$host_name}" > $dev/wusb_host_name
+            echo "${3:-$host_band_group}" > $dev/wusb_host_band_groups
+            echo ${2:-$host_CHID} > $dev/wusb_chid
+        done
+        ;;
+    get-cdid)
+        for dev in ${2:-$devs}
+          do
+          cat $dev/wusb_cdid
+        done
+        ;;
+    set-cc)
+        for dev in ${2:-$devs}; do
+            shift
+            CDID="$(head --bytes=16 /dev/urandom  | od -tx1 -An)"
+            CK="$(head --bytes=16 /dev/urandom  | od -tx1 -An)"
+            echo "$CDID" > $dev/wusb_cdid
+            echo "$CK" > $dev/wusb_ck
+
+            echo I: CC set >&2
+            echo "CHID: $(cat $dev/wusb_chid)"
+            echo "CDID:$CDID"
+            echo "CK:  $CK"
+        done
+        ;;
+    help|h|--help|-h)
+        help
+        ;;
+    *)
+        echo "E: Unknown usage" 1>&2
+        help 1>&2
+        result=1
+esac
+exit $result
diff --git a/MAINTAINERS b/MAINTAINERS
index 5c3f79c..16202c8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -378,8 +378,9 @@
 S:	Supported
 
 AMD MICROCODE UPDATE SUPPORT
-P:      Peter Oruba
-M:      peter.oruba@amd.com
+P:      Andreas Herrmann
+M:      andeas.herrmann3@amd.com
+L:      amd64-microcode@amd64.org
 S:      Supported
 
 AMS (Apple Motion Sensor) DRIVER
@@ -1053,6 +1054,12 @@
 W:	http://www.ibm.com/developerworks/power/cell/
 S:	Supported
 
+CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
+P:	David Vrabel
+M:	david.vrabel@csr.com
+L:	linux-usb@vger.kernel.org
+S:	Supported
+
 CFAG12864B LCD DRIVER
 P:	Miguel Ojeda Sandonis
 M:	miguel.ojeda.sandonis@gmail.com
@@ -1427,8 +1434,8 @@
 S:	Maintained
 
 DOCKING STATION DRIVER
-P:	Kristen Carlson Accardi
-M:	kristen.c.accardi@intel.com
+P:	Shaohua Li
+M:	shaohua.li@intel.com
 L:	linux-acpi@vger.kernel.org
 S:	Supported
 
@@ -2103,6 +2110,12 @@
 L:	linux-scsi@vger.kernel.org
 S:	Orphan
 
+IDLE-I7300
+P:	Andy Henroid
+M:	andrew.d.henroid@intel.com
+L:	linux-pm@lists.linux-foundation.org
+S:	Supported
+
 IEEE 1394 SUBSYSTEM (drivers/ieee1394)
 P:	Ben Collins
 M:	ben.collins@ubuntu.com
@@ -2176,6 +2189,13 @@
 L:	linux-kernel@vger.kernel.org
 S:	Supported
 
+INTEL IOMMU (VT-d)
+P:	David Woodhouse
+M:	dwmw2@infradead.org
+L:	iommu@lists.linux-foundation.org
+T:	git://git.infradead.org/iommu-2.6.git
+S:	Supported
+
 INTEL IOP-ADMA DMA DRIVER
 P:	Dan Williams
 M:	dan.j.williams@intel.com
@@ -2928,9 +2948,9 @@
 
 NETEFFECT IWARP RNIC DRIVER (IW_NES)
 P:	Faisal Latif
-M:	flatif@neteffect.com
+M:	faisal.latif@intel.com
 P:	Chien Tung
-M:	ctung@neteffect.com
+M:	chien.tin.tung@intel.com
 L:	general@lists.openfabrics.org
 W:	http://www.neteffect.com
 S:	Supported
@@ -3173,6 +3193,11 @@
 L:	i2c@lm-sensors.org
 S:	Maintained
 
+PANASONIC LAPTOP ACPI EXTRAS DRIVER
+P:	Harald Welte
+M:	laforge@gnumonks.org
+S:	Maintained
+
 PANASONIC MN10300/AM33 PORT
 P:	David Howells
 M:	dhowells@redhat.com
@@ -3244,11 +3269,6 @@
 T:	git kernel.org:/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
 S:	Supported
 
-PCI HOTPLUG CORE
-P:	Kristen Carlson Accardi
-M:	kristen.c.accardi@intel.com
-S:	Supported
-
 PCIE HOTPLUG DRIVER
 P:	Kristen Carlson Accardi
 M:	kristen.c.accardi@intel.com
@@ -4191,6 +4211,12 @@
 T:	git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6.git
 S:	Maintained
 
+ULTRA-WIDEBAND (UWB) SUBSYSTEM:
+P:	David Vrabel
+M:	david.vrabel@csr.com
+L:	linux-usb@vger.kernel.org
+S:	Supported
+
 UNIFORM CDROM DRIVER
 P:	Jens Axboe
 M:	axboe@kernel.dk
@@ -4616,6 +4642,11 @@
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 
+WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM
+P:	David Vrabel
+M:	david.vrabel@csr.com
+S:	Maintained
+
 WISTRON LAPTOP BUTTON DRIVER
 P:	Miloslav Trmac
 M:	mitr@volny.cz
diff --git a/Makefile b/Makefile
index 16e3fbb..e9c5d47 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
-SUBLEVEL = 27
-EXTRAVERSION =
-NAME = Rotary Wombat
+SUBLEVEL = 28
+EXTRAVERSION = -rc2
+NAME = Killer Bat of Doom
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -437,7 +437,7 @@
 # KBUILD_DEFCONFIG may point out an alternative default configuration
 # used for 'make defconfig'
 include $(srctree)/arch/$(SRCARCH)/Makefile
-export KBUILD_DEFCONFIG
+export KBUILD_DEFCONFIG KBUILD_KCONFIG
 
 config %config: scripts_basic outputmakefile FORCE
 	$(Q)mkdir -p include/linux include/config
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 8509dad..18a3ea1a 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -165,14 +165,11 @@
 	buf.error = 0;
 
 	error = vfs_readdir(file, osf_filldir, &buf);
-	if (error < 0)
-		goto out_putf;
-
-	error = buf.error;
+	if (error >= 0)
+		error = buf.error;
 	if (count != buf.count)
 		error = count - buf.count;
 
- out_putf:
 	fput(file);
  out:
 	return error;
@@ -986,10 +983,12 @@
 osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp,
 	   struct timeval32 __user *tvp)
 {
-	s64 timeout = MAX_SCHEDULE_TIMEOUT;
+	struct timespec end_time, *to = NULL;
 	if (tvp) {
 		time_t sec, usec;
 
+		to = &end_time;
+
 		if (!access_ok(VERIFY_READ, tvp, sizeof(*tvp))
 		    || __get_user(sec, &tvp->tv_sec)
 		    || __get_user(usec, &tvp->tv_usec)) {
@@ -999,14 +998,13 @@
 		if (sec < 0 || usec < 0)
 			return -EINVAL;
 
-		if ((unsigned long) sec < MAX_SELECT_SECONDS) {
-			timeout = (usec + 1000000/HZ - 1) / (1000000/HZ);
-			timeout += sec * (unsigned long) HZ;
-		}
+		if (poll_select_set_timeout(to, sec, usec * NSEC_PER_USEC))
+			return -EINVAL;		
+
 	}
 
 	/* OSF does not copy back the remaining time.  */
-	return core_sys_select(n, inp, outp, exp, &timeout);
+	return core_sys_select(n, inp, outp, exp, to);
 }
 
 struct rusage32 {
diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c
index 7c3d5ec..bd8ac53 100644
--- a/arch/alpha/oprofile/common.c
+++ b/arch/alpha/oprofile/common.c
@@ -106,7 +106,7 @@
 }
 
 static int
-op_axp_create_files(struct super_block * sb, struct dentry * root)
+op_axp_create_files(struct super_block *sb, struct dentry *root)
 {
 	int i;
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index df39d20..5021db2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -356,7 +356,7 @@
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select ZONE_DMA if PCI
+	select DMABOUNCE if PCI
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
@@ -540,16 +540,15 @@
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
-config ARCH_MSM7X00A
-	bool "Qualcomm MSM7X00A"
+config ARCH_MSM
+	bool "Qualcomm MSM"
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
-	  Support for Qualcomm MSM7X00A based systems.  This runs on the ARM11
-	  apps processor of the MSM7X00A and depends on a shared memory
+	  Support for Qualcomm MSM7K based systems.  This runs on the ARM11
+	  apps processor of the MSM7K and depends on a shared memory
 	  interface to the ARM9 modem processor which runs the baseband stack
 	  and controls some vital subsystems (clock and power control, etc).
-	  <http://www.cdmatech.com/products/msm7200_chipset_solution.jsp>
 
 endchoice
 
@@ -1256,6 +1255,8 @@
 
 source "drivers/usb/Kconfig"
 
+source "drivers/uwb/Kconfig"
+
 source "drivers/mmc/Kconfig"
 
 source "drivers/memstick/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 7d51212..bd6e281 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -141,7 +141,7 @@
  machine-$(CONFIG_ARCH_MX3)	   := mx3
  machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
     plat-$(CONFIG_PLAT_ORION)	   := orion
- machine-$(CONFIG_ARCH_MSM7X00A)   := msm
+ machine-$(CONFIG_ARCH_MSM)	   := msm
  machine-$(CONFIG_ARCH_LOKI)       := loki
  machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
 
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 2e32acc..86b5e69 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -13,10 +13,10 @@
 config SA1111
 	bool
 	select DMABOUNCE if !ARCH_PXA
-	select ZONE_DMA if !ARCH_PXA
 
 config DMABOUNCE
 	bool
+	select ZONE_DMA
 
 config TIMER_ACORN
 	bool
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index fb86f24..47ccec9 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -581,6 +581,7 @@
 		goto out;
 	}
 
+#ifdef CONFIG_DMABOUNCE
 	/*
 	 * If the parent device has a DMA mask associated with it,
 	 * propagate it down to the children.
@@ -598,6 +599,7 @@
 			}
 		}
 	}
+#endif
 
 out:
 	return ret;
@@ -937,7 +939,7 @@
 #define sa1111_resume  NULL
 #endif
 
-static int sa1111_probe(struct platform_device *pdev)
+static int __devinit sa1111_probe(struct platform_device *pdev)
 {
 	struct resource *mem;
 	int irq;
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index 9b8748a..f3af0b5 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -1,71 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Mon Nov 28 10:30:09 2005
+# Linux kernel version: 2.6.27
+# Mon Oct 20 10:12:23 2008
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -79,50 +119,97 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_MSM7X00A is not set
 
 #
-# Intel PXA2xx Implementations
+# Intel PXA2xx/PXA3xx Implementations
 #
+# CONFIG_ARCH_GUMSTIX is not set
 # CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
 # CONFIG_ARCH_PXA_IDP is not set
 CONFIG_PXA_SHARPSL=y
-CONFIG_PXA_SHARPSL_25x=y
-# CONFIG_PXA_SHARPSL_27x is not set
 CONFIG_MACH_POODLE=y
 CONFIG_MACH_CORGI=y
 CONFIG_MACH_SHEPHERD=y
 CONFIG_MACH_HUSKY=y
+# CONFIG_MACH_AKITA is not set
+# CONFIG_MACH_SPITZ is not set
+# CONFIG_MACH_BORZOI is not set
 CONFIG_MACH_TOSA=y
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
 CONFIG_PXA25x=y
 CONFIG_PXA_SHARP_C7xx=y
 CONFIG_PXA_SSP=y
+# CONFIG_PXA_PWM is not set
+# CONFIG_TOSA_BT is not set
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
 
 #
 # Processor Type
@@ -131,25 +218,30 @@
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
 CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_IWMMXT is not set
 CONFIG_XSCALE_PMU=y
+CONFIG_SHARP_LOCOMO=y
 CONFIG_SHARP_PARAM=y
+CONFIG_SHARPSL_PM=y
 CONFIG_SHARP_SCOOP=y
 
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -164,16 +256,32 @@
 #
 # Kernel Features
 #
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -183,6 +291,13 @@
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -199,6 +314,7 @@
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 # CONFIG_ARTHUR is not set
@@ -207,12 +323,12 @@
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=y
-
-#
-# Networking
-#
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
@@ -223,6 +339,10 @@
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -236,140 +356,131 @@
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 # CONFIG_IP_NF_TARGET_REJECT is not set
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-# CONFIG_IP_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
 # CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_DSCP is not set
-# CONFIG_IP_NF_TARGET_MARK is not set
-# CONFIG_IP_NF_TARGET_CLASSIFY is not set
 # CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_TARGET_NOTRACK is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+# CONFIG_IP6_NF_MATCH_AH is not set
 CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_RT=m
 # CONFIG_IP6_NF_TARGET_LOG is not set
+CONFIG_IP6_NF_FILTER=m
 # CONFIG_IP6_NF_TARGET_REJECT is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_MARK is not set
 # CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -377,21 +488,16 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 CONFIG_IRDA=m
 
 #
@@ -421,27 +527,17 @@
 #
 # Dongle support
 #
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
 
 #
 # FIR device drivers
 #
 # CONFIG_USB_IRDA is not set
 # CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VIA_FIR is not set
 CONFIG_PXA_FICP=m
+# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -457,9 +553,12 @@
 #
 CONFIG_BT_HCIUSB=m
 # CONFIG_BT_HCIUSB_SCO is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -468,11 +567,20 @@
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 # CONFIG_IEEE80211_CRYPT_CCMP is not set
 # CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -481,19 +589,16 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -501,16 +606,20 @@
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -535,16 +644,18 @@
 # Mapping drivers for chip access
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_SHARP_SL=y
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -553,78 +664,66 @@
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_H1900 is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_SHARPSL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=y
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -644,121 +743,76 @@
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# Ethernet (10000 Mbit)
+# USB Network Adapters
 #
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_CS=m
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
 # CONFIG_PCMCIA_3C574 is not set
@@ -768,10 +822,6 @@
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -782,30 +832,29 @@
 CONFIG_PPP_BSDCOMP=m
 # CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
+CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
 
 #
 # Input Device Drivers
@@ -814,19 +863,39 @@
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_LOCOMO is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_CORGI=y
 CONFIG_KEYBOARD_SPITZ=y
+CONFIG_KEYBOARD_TOSA=y
+# CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is not set
+# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_CORGI=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_CORGI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
 
 #
@@ -839,8 +908,11 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -849,6 +921,7 @@
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -860,97 +933,130 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
-#
-
-#
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
 # CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
 
 #
-# Hardware Monitoring support
+# SPI Master Controller Drivers
 #
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -960,70 +1066,193 @@
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+CONFIG_SENSORS_MAX1111=y
 # CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
 
 #
-# Video For Linux
+# Multimedia drivers
 #
-
-#
-# Video Adapters
-#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
 # CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
 # CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_VIDEO_AUDIO_DECODER is not set
-# CONFIG_VIDEO_DECODER is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_USB_DSBR=m
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_PXA is not set
+# CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_CORGI=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_LOCOMO=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -1031,6 +1260,7 @@
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
@@ -1043,93 +1273,95 @@
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
 # CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-CONFIG_SOUND_OSS=y
-# CONFIG_SOUND_TRACEINIT is not set
-# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_AD1816 is not set
-# CONFIG_SOUND_SGALAXY is not set
-# CONFIG_SOUND_ADLIB is not set
-# CONFIG_SOUND_ACI_MIXER is not set
-# CONFIG_SOUND_CS4232 is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_GUS is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_NM256 is not set
-# CONFIG_SOUND_MAD16 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
-# CONFIG_SOUND_SB is not set
-# CONFIG_SOUND_AWE32_SYNTH is not set
-# CONFIG_SOUND_WAVEFRONT is not set
-# CONFIG_SOUND_MAUI is not set
-# CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_OPL3SA1 is not set
-# CONFIG_SOUND_OPL3SA2 is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# USB support
+# USB Input Devices
 #
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_SL811_CS=m
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1148,33 +1380,11 @@
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-# CONFIG_USB_ACECAD is not set
-CONFIG_USB_KBTAB=m
-CONFIG_USB_POWERMATE=m
-CONFIG_USB_MTOUCH=m
-# CONFIG_USB_ITMTOUCH is not set
-CONFIG_USB_EGALAX=m
-# CONFIG_USB_YEALINK is not set
-CONFIG_USB_XPAD=m
-CONFIG_USB_ATI_REMOTE=m
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Imaging devices
@@ -1183,56 +1393,22 @@
 CONFIG_USB_MICROTEK=m
 
 #
-# USB Multimedia devices
-#
-CONFIG_USB_DABUSB=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_DSBR=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_PWC is not set
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
-
-#
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
 # CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1240,6 +1416,7 @@
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
 # CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
@@ -1257,50 +1434,68 @@
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 # CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
+# CONFIG_USB_SERIAL_DEBUG is not set
 
 #
 # USB Miscellaneous drivers
 #
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_AUERSWALD=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
+# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETSERVO=m
+# CONFIG_USB_PHIDGET is not set
 CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_PXA25X=y
+CONFIG_USB_PXA25X=y
+# CONFIG_USB_PXA25X_SMALL is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 # CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
@@ -1310,15 +1505,42 @@
 CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
 CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_WBSD is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1327,16 +1549,17 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
+# CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1361,11 +1584,13 @@
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1377,39 +1602,42 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
 # CONFIG_JFFS2_CMODE_NONE is not set
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1419,7 +1647,6 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1439,11 +1666,9 @@
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1484,35 +1709,71 @@
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1521,46 +1782,113 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
 
 #
-# Hardware crypto devices
+# Authenticated Encryption with Associated Data
 #
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
index ae4c5e6..3b4ecf2 100644
--- a/arch/arm/configs/msm_defconfig
+++ b/arch/arm/configs/msm_defconfig
@@ -133,7 +133,7 @@
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_MSM7X00A=y
+CONFIG_ARCH_MSM=y
 
 #
 # Boot options
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 7d59fb1..4df5b4d 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -1,71 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Mon Nov 28 10:26:52 2005
+# Linux kernel version: 2.6.27
+# Mon Oct 20 10:25:37 2008
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -79,49 +119,95 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_MSM7X00A is not set
 
 #
-# Intel PXA2xx Implementations
+# Intel PXA2xx/PXA3xx Implementations
 #
+# CONFIG_ARCH_GUMSTIX is not set
 # CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
 # CONFIG_ARCH_PXA_IDP is not set
 CONFIG_PXA_SHARPSL=y
-# CONFIG_PXA_SHARPSL_25x is not set
-CONFIG_PXA_SHARPSL_27x=y
+# CONFIG_MACH_POODLE is not set
+# CONFIG_MACH_CORGI is not set
+# CONFIG_MACH_SHEPHERD is not set
+# CONFIG_MACH_HUSKY is not set
 CONFIG_MACH_AKITA=y
 CONFIG_MACH_SPITZ=y
 CONFIG_MACH_BORZOI=y
+# CONFIG_MACH_TOSA is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
 CONFIG_PXA27x=y
-CONFIG_IWMMXT=y
 CONFIG_PXA_SHARP_Cxx00=y
 CONFIG_PXA_SSP=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
 
 #
 # Processor Type
@@ -130,25 +216,29 @@
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
 CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
 CONFIG_XSCALE_PMU=y
 CONFIG_SHARP_PARAM=y
+CONFIG_SHARPSL_PM=y
 CONFIG_SHARP_SCOOP=y
 
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -163,16 +253,32 @@
 #
 # Kernel Features
 #
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -182,6 +288,13 @@
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -198,6 +311,7 @@
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 # CONFIG_ARTHUR is not set
@@ -206,12 +320,12 @@
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=y
-
-#
-# Networking
-#
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
@@ -222,6 +336,10 @@
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -235,140 +353,131 @@
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 # CONFIG_IP_NF_TARGET_REJECT is not set
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-# CONFIG_IP_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_TOS is not set
 # CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_DSCP is not set
-# CONFIG_IP_NF_TARGET_MARK is not set
-# CONFIG_IP_NF_TARGET_CLASSIFY is not set
 # CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_TARGET_NOTRACK is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+# CONFIG_IP6_NF_MATCH_AH is not set
 CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_RT=m
 # CONFIG_IP6_NF_TARGET_LOG is not set
+CONFIG_IP6_NF_FILTER=m
 # CONFIG_IP6_NF_TARGET_REJECT is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_MARK is not set
 # CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -376,21 +485,16 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 CONFIG_IRDA=m
 
 #
@@ -420,27 +524,17 @@
 #
 # Dongle support
 #
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
 
 #
 # FIR device drivers
 #
 # CONFIG_USB_IRDA is not set
 # CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VIA_FIR is not set
 CONFIG_PXA_FICP=m
+# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -456,9 +550,12 @@
 #
 CONFIG_BT_HCIUSB=m
 # CONFIG_BT_HCIUSB_SCO is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -467,11 +564,20 @@
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 # CONFIG_IEEE80211_CRYPT_CCMP is not set
 # CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -480,19 +586,16 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -500,16 +603,20 @@
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -534,16 +641,18 @@
 # Mapping drivers for chip access
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_SHARP_SL=y
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -552,78 +661,66 @@
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_H1900 is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_SHARPSL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=y
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -643,121 +740,76 @@
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# Ethernet (10000 Mbit)
+# USB Network Adapters
 #
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_CS=m
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
 # CONFIG_PCMCIA_3C574 is not set
@@ -767,10 +819,6 @@
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -781,31 +829,29 @@
 CONFIG_PPP_BSDCOMP=m
 # CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
+CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_POWER is not set
+# CONFIG_INPUT_APMPOWER is not set
 
 #
 # Input Device Drivers
@@ -816,17 +862,35 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_CORGI is not set
 CONFIG_KEYBOARD_SPITZ=y
+# CONFIG_KEYBOARD_PXA27x is not set
+# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_CORGI=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_CORGI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
 
 #
@@ -839,8 +903,11 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -849,6 +916,7 @@
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -860,101 +928,253 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
-#
-
-#
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
 # CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_SIMTEC is not set
 
 #
-# Hardware Monitoring support
+# External I2C/SMBus adapter drivers
 #
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+CONFIG_SENSORS_MAX1111=y
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
 #
-# CONFIG_VIDEO_DEV is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia core support
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
 # CONFIG_FB_W100 is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_CORGI=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -962,6 +1182,7 @@
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
@@ -974,55 +1195,96 @@
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
 # CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# USB support
+# USB Input Devices
 #
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_SL811_CS=m
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1041,33 +1303,11 @@
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-# CONFIG_USB_ACECAD is not set
-CONFIG_USB_KBTAB=m
-CONFIG_USB_POWERMATE=m
-CONFIG_USB_MTOUCH=m
-# CONFIG_USB_ITMTOUCH is not set
-CONFIG_USB_EGALAX=m
-# CONFIG_USB_YEALINK is not set
-CONFIG_USB_XPAD=m
-CONFIG_USB_ATI_REMOTE=m
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Imaging devices
@@ -1076,51 +1316,22 @@
 CONFIG_USB_MICROTEK=m
 
 #
-# USB Multimedia devices
-#
-CONFIG_USB_DABUSB=m
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
-
-#
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
 # CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1128,6 +1339,7 @@
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
 # CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
@@ -1145,49 +1357,66 @@
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 # CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 # CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
+# CONFIG_USB_SERIAL_DEBUG is not set
 
 #
 # USB Miscellaneous drivers
 #
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_AUERSWALD=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
+# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETSERVO=m
+# CONFIG_USB_PHIDGET is not set
 CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
 CONFIG_USB_DUMMY_HCD=m
 CONFIG_USB_GADGET_DUALSPEED=y
@@ -1198,15 +1427,42 @@
 CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
 CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_WBSD is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1218,18 +1474,19 @@
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
+# CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1254,11 +1511,13 @@
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1270,39 +1529,42 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
 # CONFIG_JFFS2_CMODE_NONE is not set
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1312,7 +1574,6 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1332,11 +1593,9 @@
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1377,35 +1636,71 @@
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1414,46 +1709,113 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
 
 #
-# Hardware crypto devices
+# Authenticated Encryption with Associated Data
 #
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 8b7a431a..9033d14 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -147,6 +147,7 @@
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
+CONFIG_TRIZEPS_PXA=y
 CONFIG_MACH_TRIZEPS4=y
 CONFIG_MACH_TRIZEPS4_CONXS=y
 # CONFIG_MACH_TRIZEPS4_ANY is not set
diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h
index 5001390..d3f0a9e 100644
--- a/arch/arm/include/asm/div64.h
+++ b/arch/arm/include/asm/div64.h
@@ -165,7 +165,7 @@
 			__res = __m;					\
 			asm (	"umlal	%Q0, %R0, %Q1, %Q2\n\t"		\
 				"mov	%Q0, #0"			\
-				: "+r" (__res)				\
+				: "+&r" (__res)				\
 				: "r" (__m), "r" (__n)			\
 				: "cc" );				\
 		} else {						\
@@ -182,7 +182,7 @@
 				"umlal	%R0, %Q0, %Q1, %R2\n\t"		\
 				"mov	%R0, #0\n\t"			\
 				"umlal	%Q0, %R0, %R1, %R2"		\
-				: "+r" (__res)				\
+				: "+&r" (__res)				\
 				: "r" (__m), "r" (__n)			\
 				: "cc" );				\
 		} else {						\
@@ -192,7 +192,7 @@
 				"adds	%Q0, %1, %Q0\n\t"		\
 				"adc	%R0, %R0, #0\n\t"		\
 				"umlal	%Q0, %R0, %R2, %R3"		\
-				: "+r" (__res), "+r" (__z)		\
+				: "+&r" (__res), "+&r" (__z)		\
 				: "r" (__m), "r" (__n)			\
 				: "cc" );				\
 		}							\
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 7e5ebb5..9b0447c 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -404,6 +404,7 @@
 		}
 
 		pin = bank->chipbase;
+		gpio = &irq_desc[pin];
 
 		while (isr) {
 			if (isr & 1) {
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
index 71c2fa7..98ec30c 100644
--- a/arch/arm/mach-clps711x/include/mach/memory.h
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -89,6 +89,8 @@
  * 	node 3:  0xd8000000 - 0xdfffffff
  */
 #define NODE_MEM_SIZE_BITS	24
+#define SECTION_SIZE_BITS	24
+#define MAX_PHYSMEM_BITS	32
 
 #endif
 
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index db8b5fe..2c5a02b 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -167,11 +167,6 @@
 
 comment "IXP4xx Options"
 
-config DMABOUNCE
-	bool
-	default y
-	depends on PCI
-
 config IXP4XX_INDIRECT_PCI
 	bool "Use indirect PCI memory access"
 	depends on PCI
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index e14bf40..b96c55d 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -2,4 +2,4 @@
 
 obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
 obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
-obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6281-setup.o
+obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 85cad05..0bb1fbd 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -16,6 +16,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
 #include <linux/spi/orion_spi.h>
+#include <net/dsa.h>
 #include <asm/page.h>
 #include <asm/timex.h>
 #include <asm/mach/map.h>
@@ -152,6 +153,40 @@
 
 
 /*****************************************************************************
+ * Ethernet switch
+ ****************************************************************************/
+static struct resource kirkwood_switch_resources[] = {
+	{
+		.start	= 0,
+		.end	= 0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_switch_device = {
+	.name		= "dsa",
+	.id		= 0,
+	.num_resources	= 0,
+	.resource	= kirkwood_switch_resources,
+};
+
+void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
+{
+	if (irq != NO_IRQ) {
+		kirkwood_switch_resources[0].start = irq;
+		kirkwood_switch_resources[0].end = irq;
+		kirkwood_switch_device.num_resources = 1;
+	}
+
+	d->mii_bus = &kirkwood_ge00_shared.dev;
+	d->netdev = &kirkwood_ge00.dev;
+	kirkwood_switch_device.dev.platform_data = d;
+
+	platform_device_register(&kirkwood_switch_device);
+}
+
+
+/*****************************************************************************
  * SoC RTC
  ****************************************************************************/
 static struct resource kirkwood_rtc_resource = {
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 8fa0f6a..5774632 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -11,6 +11,7 @@
 #ifndef __ARCH_KIRKWOOD_COMMON_H
 #define __ARCH_KIRKWOOD_COMMON_H
 
+struct dsa_platform_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
@@ -29,6 +30,7 @@
 
 void kirkwood_ehci_init(void);
 void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
 void kirkwood_pcie_init(void);
 void kirkwood_rtc_init(void);
 void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index f785093..175054a 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -19,6 +19,7 @@
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
@@ -74,6 +75,15 @@
 	.duplex		= DUPLEX_FULL,
 };
 
+static struct dsa_platform_data rd88f6281_switch_data = {
+	.port_names[0]	= "lan1",
+	.port_names[1]	= "lan2",
+	.port_names[2]	= "lan3",
+	.port_names[3]	= "lan4",
+	.port_names[4]	= "wan",
+	.port_names[5]	= "cpu",
+};
+
 static struct mv_sata_platform_data rd88f6281_sata_data = {
 	.n_ports	= 2,
 };
@@ -87,6 +97,7 @@
 
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&rd88f6281_ge00_data);
+	kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ);
 	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6281_sata_data);
 	kirkwood_uart0_init();
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 3553bab..d140abc 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,18 +1,13 @@
-if ARCH_MSM7X00A
+if ARCH_MSM
 
-comment "MSM7X00A Board Type"
-	depends on ARCH_MSM7X00A
+comment "MSM Board Type"
+	depends on ARCH_MSM
 
 config MACH_HALIBUT
-	depends on ARCH_MSM7X00A
+	depends on ARCH_MSM
 	default y
-	bool "Halibut Board (QCT SURF7200A)"
+	bool "Halibut Board (QCT SURF7201A)"
 	help
-	  Support for the Qualcomm SURF7200A eval board.
-
-config MSM7X00A_IDLE
-	depends on ARCH_MSM7X00A
-	default y
-	bool "Idle Support for MSM7X00A"
+	  Support for the Qualcomm SURF7201A eval board.
 
 endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index d12f236..1aa4700 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,7 +1,8 @@
 obj-y += io.o idle.o irq.o timer.o dma.o
-
-# Common code for board init
-obj-y += common.o
+obj-y += devices.o
+obj-y += proc_comm.o
+obj-y += vreg.o
+obj-y += clock.o clock-7x01a.o
 
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o
 
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index a242591..c2a96e3 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -33,6 +33,8 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
+#include "devices.h"
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= 0x9C004300,
@@ -53,31 +55,12 @@
 	.resource	= smc91x_resources,
 };
 
-static void mddi0_panel_power(int on)
-{
-}
-
-static struct msm_mddi_platform_data msm_mddi0_pdata = {
-	.panel_power	= mddi0_panel_power,
-	.has_vsync_irq	= 0,
-};
-
-static struct platform_device msm_mddi0_device = {
-	.name	= "msm_mddi",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &msm_mddi0_pdata
-	},
-};
-
-static struct platform_device msm_serial0_device = {
-	.name	= "msm_serial",
-	.id	= 0,
-};
-
 static struct platform_device *devices[] __initdata = {
-	&msm_serial0_device,
-	&msm_mddi0_device,
+	&msm_device_uart3,
+	&msm_device_smd,
+	&msm_device_nand,
+	&msm_device_hsusb,
+	&msm_device_i2c,
 	&smc91x_device,
 };
 
@@ -91,20 +74,15 @@
 static void __init halibut_init(void)
 {
 	platform_add_devices(devices, ARRAY_SIZE(devices));
-	msm_add_devices();
 }
 
 static void __init halibut_map_io(void)
 {
 	msm_map_common_io();
+	msm_clock_init();
 }
 
 MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
-
-/* UART for LL DEBUG */
-	.phys_io	= MSM_UART1_PHYS,
-	.io_pg_offst	= ((MSM_UART1_BASE) >> 18) & 0xfffc,
-
 	.boot_params	= 0x10000100,
 	.map_io		= halibut_map_io,
 	.init_irq	= halibut_init_irq,
diff --git a/arch/arm/mach-msm/clock-7x01a.c b/arch/arm/mach-msm/clock-7x01a.c
new file mode 100644
index 0000000..62230a3
--- /dev/null
+++ b/arch/arm/mach-msm/clock-7x01a.c
@@ -0,0 +1,126 @@
+/* arch/arm/mach-msm/clock-7x01a.c
+ *
+ * Clock tables for MSM7X01A
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2007 QUALCOMM Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include "clock.h"
+#include "devices.h"
+
+/* clock IDs used by the modem processor */
+
+#define ACPU_CLK	0   /* Applications processor clock */
+#define ADM_CLK		1   /* Applications data mover clock */
+#define ADSP_CLK	2   /* ADSP clock */
+#define EBI1_CLK	3   /* External bus interface 1 clock */
+#define EBI2_CLK	4   /* External bus interface 2 clock */
+#define ECODEC_CLK	5   /* External CODEC clock */
+#define EMDH_CLK	6   /* External MDDI host clock */
+#define GP_CLK		7   /* General purpose clock */
+#define GRP_CLK		8   /* Graphics clock */
+#define I2C_CLK		9   /* I2C clock */
+#define ICODEC_RX_CLK	10  /* Internal CODEX RX clock */
+#define ICODEC_TX_CLK	11  /* Internal CODEX TX clock */
+#define IMEM_CLK	12  /* Internal graphics memory clock */
+#define MDC_CLK		13  /* MDDI client clock */
+#define MDP_CLK		14  /* Mobile display processor clock */
+#define PBUS_CLK	15  /* Peripheral bus clock */
+#define PCM_CLK		16  /* PCM clock */
+#define PMDH_CLK	17  /* Primary MDDI host clock */
+#define SDAC_CLK	18  /* Stereo DAC clock */
+#define SDC1_CLK	19  /* Secure Digital Card clocks */
+#define SDC1_PCLK	20
+#define SDC2_CLK	21
+#define SDC2_PCLK	22
+#define SDC3_CLK	23
+#define SDC3_PCLK	24
+#define SDC4_CLK	25
+#define SDC4_PCLK	26
+#define TSIF_CLK	27  /* Transport Stream Interface clocks */
+#define TSIF_REF_CLK	28
+#define TV_DAC_CLK	29  /* TV clocks */
+#define TV_ENC_CLK	30
+#define UART1_CLK	31  /* UART clocks */
+#define UART2_CLK	32
+#define UART3_CLK	33
+#define UART1DM_CLK	34
+#define UART2DM_CLK	35
+#define USB_HS_CLK	36  /* High speed USB core clock */
+#define USB_HS_PCLK	37  /* High speed USB pbus clock */
+#define USB_OTG_CLK	38  /* Full speed USB clock */
+#define VDC_CLK		39  /* Video controller clock */
+#define VFE_CLK		40  /* Camera / Video Front End clock */
+#define VFE_MDC_CLK	41  /* VFE MDDI client clock */
+
+#define NR_CLKS		42
+
+#define CLOCK(clk_name, clk_id, clk_dev, clk_flags) {	\
+	.name = clk_name, \
+	.id = clk_id, \
+	.flags = clk_flags, \
+	.dev = clk_dev, \
+	}
+
+#define OFF CLKFLAG_AUTO_OFF
+#define MINMAX CLKFLAG_USE_MIN_MAX_TO_SET
+
+struct clk msm_clocks[] = {
+	CLOCK("adm_clk",	ADM_CLK,	NULL, 0),
+	CLOCK("adsp_clk",	ADSP_CLK,	NULL, 0),
+	CLOCK("ebi1_clk",	EBI1_CLK,	NULL, 0),
+	CLOCK("ebi2_clk",	EBI2_CLK,	NULL, 0),
+	CLOCK("ecodec_clk",	ECODEC_CLK,	NULL, 0),
+	CLOCK("emdh_clk",	EMDH_CLK,	NULL, OFF),
+	CLOCK("gp_clk",		GP_CLK,		NULL, 0),
+	CLOCK("grp_clk",	GRP_CLK,	NULL, OFF),
+	CLOCK("i2c_clk",	I2C_CLK,	&msm_device_i2c.dev, 0),
+	CLOCK("icodec_rx_clk",	ICODEC_RX_CLK,	NULL, 0),
+	CLOCK("icodec_tx_clk",	ICODEC_TX_CLK,	NULL, 0),
+	CLOCK("imem_clk",	IMEM_CLK,	NULL, OFF),
+	CLOCK("mdc_clk",	MDC_CLK,	NULL, 0),
+	CLOCK("mdp_clk",	MDP_CLK,	NULL, OFF),
+	CLOCK("pbus_clk",	PBUS_CLK,	NULL, 0),
+	CLOCK("pcm_clk",	PCM_CLK,	NULL, 0),
+	CLOCK("pmdh_clk",	PMDH_CLK,	NULL, OFF | MINMAX),
+	CLOCK("sdac_clk",	SDAC_CLK,	NULL, OFF),
+	CLOCK("sdc_clk",	SDC1_CLK,	&msm_device_sdc1.dev, OFF),
+	CLOCK("sdc_pclk",	SDC1_PCLK,	&msm_device_sdc1.dev, OFF),
+	CLOCK("sdc_clk",	SDC2_CLK,	&msm_device_sdc2.dev, OFF),
+	CLOCK("sdc_pclk",	SDC2_PCLK,	&msm_device_sdc2.dev, OFF),
+	CLOCK("sdc_clk",	SDC3_CLK,	&msm_device_sdc3.dev, OFF),
+	CLOCK("sdc_pclk",	SDC3_PCLK,	&msm_device_sdc3.dev, OFF),
+	CLOCK("sdc_clk",	SDC4_CLK,	&msm_device_sdc4.dev, OFF),
+	CLOCK("sdc_pclk",	SDC4_PCLK,	&msm_device_sdc4.dev, OFF),
+	CLOCK("tsif_clk",	TSIF_CLK,	NULL, 0),
+	CLOCK("tsif_ref_clk",	TSIF_REF_CLK,	NULL, 0),
+	CLOCK("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
+	CLOCK("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
+	CLOCK("uart_clk",	UART1_CLK,	&msm_device_uart1.dev, OFF),
+	CLOCK("uart_clk",	UART2_CLK,	&msm_device_uart2.dev, 0),
+	CLOCK("uart_clk",	UART3_CLK,	&msm_device_uart3.dev, OFF),
+	CLOCK("uart1dm_clk",	UART1DM_CLK,	NULL, OFF),
+	CLOCK("uart2dm_clk",	UART2DM_CLK,	NULL, 0),
+	CLOCK("usb_hs_clk",	USB_HS_CLK,	&msm_device_hsusb.dev, OFF),
+	CLOCK("usb_hs_pclk",	USB_HS_PCLK,	&msm_device_hsusb.dev, OFF),
+	CLOCK("usb_otg_clk",	USB_OTG_CLK,	NULL, 0),
+	CLOCK("vdc_clk",	VDC_CLK,	NULL, OFF | MINMAX),
+	CLOCK("vfe_clk",	VFE_CLK,	NULL, OFF),
+	CLOCK("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, OFF),
+};
+
+unsigned msm_num_clocks = ARRAY_SIZE(msm_clocks);
diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c
new file mode 100644
index 0000000..3b1ce36
--- /dev/null
+++ b/arch/arm/mach-msm/clock.c
@@ -0,0 +1,218 @@
+/* arch/arm/mach-msm/clock.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2007 QUALCOMM Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+
+#include "clock.h"
+#include "proc_comm.h"
+
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clocks_lock);
+static LIST_HEAD(clocks);
+
+/*
+ * glue for the proc_comm interface
+ */
+static inline int pc_clk_enable(unsigned id)
+{
+	return msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
+}
+
+static inline void pc_clk_disable(unsigned id)
+{
+	msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
+}
+
+static inline int pc_clk_set_rate(unsigned id, unsigned rate)
+{
+	return msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
+}
+
+static inline int pc_clk_set_min_rate(unsigned id, unsigned rate)
+{
+	return msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
+}
+
+static inline int pc_clk_set_max_rate(unsigned id, unsigned rate)
+{
+	return msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate);
+}
+
+static inline int pc_clk_set_flags(unsigned id, unsigned flags)
+{
+	return msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags);
+}
+
+static inline unsigned pc_clk_get_rate(unsigned id)
+{
+	if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
+		return 0;
+	else
+		return id;
+}
+
+static inline unsigned pc_clk_is_enabled(unsigned id)
+{
+	if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
+		return 0;
+	else
+		return id;
+}
+
+static inline int pc_pll_request(unsigned id, unsigned on)
+{
+	on = !!on;
+	return msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on);
+}
+
+/*
+ * Standard clock functions defined in include/linux/clk.h
+ */
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *clk;
+
+	mutex_lock(&clocks_mutex);
+
+	list_for_each_entry(clk, &clocks, list)
+		if (!strcmp(id, clk->name) && clk->dev == dev)
+			goto found_it;
+
+	list_for_each_entry(clk, &clocks, list)
+		if (!strcmp(id, clk->name) && clk->dev == NULL)
+			goto found_it;
+
+	clk = ERR_PTR(-ENOENT);
+found_it:
+	mutex_unlock(&clocks_mutex);
+	return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&clocks_lock, flags);
+	clk->count++;
+	if (clk->count == 1)
+		pc_clk_enable(clk->id);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&clocks_lock, flags);
+	BUG_ON(clk->count == 0);
+	clk->count--;
+	if (clk->count == 0)
+		pc_clk_disable(clk->id);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return pc_clk_get_rate(clk->id);
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret;
+	if (clk->flags & CLKFLAG_USE_MIN_MAX_TO_SET) {
+		ret = pc_clk_set_max_rate(clk->id, rate);
+		if (ret)
+			return ret;
+		return pc_clk_set_min_rate(clk->id, rate);
+	}
+	return pc_clk_set_rate(clk->id, rate);
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	return -ENOSYS;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return ERR_PTR(-ENOSYS);
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_flags(struct clk *clk, unsigned long flags)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+	return pc_clk_set_flags(clk->id, flags);
+}
+EXPORT_SYMBOL(clk_set_flags);
+
+
+void __init msm_clock_init(void)
+{
+	unsigned n;
+
+	spin_lock_init(&clocks_lock);
+	mutex_lock(&clocks_mutex);
+	for (n = 0; n < msm_num_clocks; n++)
+		list_add_tail(&msm_clocks[n].list, &clocks);
+	mutex_unlock(&clocks_mutex);
+}
+
+/* The bootloader and/or AMSS may have left various clocks enabled.
+ * Disable any clocks that belong to us (CLKFLAG_AUTO_OFF) but have
+ * not been explicitly enabled by a clk_enable() call.
+ */
+static int __init clock_late_init(void)
+{
+	unsigned long flags;
+	struct clk *clk;
+	unsigned count = 0;
+
+	mutex_lock(&clocks_mutex);
+	list_for_each_entry(clk, &clocks, list) {
+		if (clk->flags & CLKFLAG_AUTO_OFF) {
+			spin_lock_irqsave(&clocks_lock, flags);
+			if (!clk->count) {
+				count++;
+				pc_clk_disable(clk->id);
+			}
+			spin_unlock_irqrestore(&clocks_lock, flags);
+		}
+	}
+	mutex_unlock(&clocks_mutex);
+	pr_info("clock_late_init() disabled %d unused clocks\n", count);
+	return 0;
+}
+
+late_initcall(clock_late_init);
diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h
new file mode 100644
index 0000000..f875e15
--- /dev/null
+++ b/arch/arm/mach-msm/clock.h
@@ -0,0 +1,48 @@
+/* arch/arm/mach-msm/clock.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2007 QUALCOMM Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_CLOCK_H
+#define __ARCH_ARM_MACH_MSM_CLOCK_H
+
+#include <linux/list.h>
+
+#define CLKFLAG_INVERT			0x00000001
+#define CLKFLAG_NOINVERT		0x00000002
+#define CLKFLAG_NONEST			0x00000004
+#define CLKFLAG_NORESET			0x00000008
+
+#define CLK_FIRST_AVAILABLE_FLAG	0x00000100
+#define CLKFLAG_USE_MIN_MAX_TO_SET	0x00000200
+#define CLKFLAG_AUTO_OFF		0x00000400
+
+struct clk {
+	uint32_t id;
+	uint32_t count;
+	uint32_t flags;
+	const char *name;
+	struct list_head list;
+	struct device *dev;
+};
+
+#define A11S_CLK_CNTL_ADDR		(MSM_CSR_BASE + 0x100)
+#define A11S_CLK_SEL_ADDR		(MSM_CSR_BASE + 0x104)
+#define A11S_VDD_SVS_PLEVEL_ADDR	(MSM_CSR_BASE + 0x124)
+
+extern struct clk msm_clocks[];
+extern unsigned msm_num_clocks;
+
+#endif
+
diff --git a/arch/arm/mach-msm/common.c b/arch/arm/mach-msm/common.c
deleted file mode 100644
index 604f8ad..0000000
--- a/arch/arm/mach-msm/common.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/* linux/arch/arm/mach-msm/common.c
- *
- * Common setup code for MSM7K Boards
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/flash.h>
-
-#include <asm/setup.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include <mach/msm_iomap.h>
-
-#include <mach/board.h>
-
-struct flash_platform_data msm_nand_data = {
-	.parts		= 0,
-	.nr_parts	= 0,
-};
-
-static struct resource msm_nand_resources[] = {
-	[0] = {
-		.start	= 7,
-		.end	= 7,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device msm_nand_device = {
-	.name		= "msm_nand",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(msm_nand_resources),
-	.resource	= msm_nand_resources,
-	.dev		= {
-		.platform_data	= &msm_nand_data,
-	},
-};
-
-static struct platform_device msm_smd_device = {
-	.name	= "msm_smd",
-	.id	= -1,
-};
-
-static struct resource msm_i2c_resources[] = {
-	{
-		.start	= MSM_I2C_BASE,
-		.end	= MSM_I2C_BASE + MSM_I2C_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_PWB_I2C,
-		.end	= INT_PWB_I2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device msm_i2c_device = {
-	.name		= "msm_i2c",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(msm_i2c_resources),
-	.resource	= msm_i2c_resources,
-};
-
-static struct resource usb_resources[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device msm_hsusb_device = {
-	.name		= "msm_hsusb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(usb_resources),
-	.resource	= usb_resources,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&msm_nand_device,
-	&msm_smd_device,
-	&msm_i2c_device,
-	&msm_hsusb_device,
-};
-
-void __init msm_add_devices(void)
-{
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
diff --git a/arch/arm/mach-msm/devices.c b/arch/arm/mach-msm/devices.c
new file mode 100644
index 0000000..f2a74b9
--- /dev/null
+++ b/arch/arm/mach-msm/devices.c
@@ -0,0 +1,267 @@
+/* linux/arch/arm/mach-msm/devices.c
+ *
+ * Copyright (C) 2008 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/msm_iomap.h>
+#include "devices.h"
+
+#include <asm/mach/flash.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+static struct resource resources_uart1[] = {
+	{
+		.start	= INT_UART1,
+		.end	= INT_UART1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= MSM_UART1_PHYS,
+		.end	= MSM_UART1_PHYS + MSM_UART1_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource resources_uart2[] = {
+	{
+		.start	= INT_UART2,
+		.end	= INT_UART2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= MSM_UART2_PHYS,
+		.end	= MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource resources_uart3[] = {
+	{
+		.start	= INT_UART3,
+		.end	= INT_UART3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= MSM_UART3_PHYS,
+		.end	= MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device msm_device_uart1 = {
+	.name	= "msm_serial",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(resources_uart1),
+	.resource	= resources_uart1,
+};
+
+struct platform_device msm_device_uart2 = {
+	.name	= "msm_serial",
+	.id	= 1,
+	.num_resources	= ARRAY_SIZE(resources_uart2),
+	.resource	= resources_uart2,
+};
+
+struct platform_device msm_device_uart3 = {
+	.name	= "msm_serial",
+	.id	= 2,
+	.num_resources	= ARRAY_SIZE(resources_uart3),
+	.resource	= resources_uart3,
+};
+
+static struct resource resources_i2c[] = {
+	{
+		.start	= MSM_I2C_PHYS,
+		.end	= MSM_I2C_PHYS + MSM_I2C_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_PWB_I2C,
+		.end	= INT_PWB_I2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_i2c = {
+	.name		= "msm_i2c",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(resources_i2c),
+	.resource	= resources_i2c,
+};
+
+static struct resource resources_hsusb[] = {
+	{
+		.start	= MSM_HSUSB_PHYS,
+		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_HS,
+		.end	= INT_USB_HS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_hsusb = {
+	.name		= "msm_hsusb",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(resources_hsusb),
+	.resource	= resources_hsusb,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+struct flash_platform_data msm_nand_data = {
+	.parts		= NULL,
+	.nr_parts	= 0,
+};
+
+static struct resource resources_nand[] = {
+	[0] = {
+		.start	= 7,
+		.end	= 7,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device msm_device_nand = {
+	.name		= "msm_nand",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(resources_nand),
+	.resource	= resources_nand,
+	.dev		= {
+		.platform_data	= &msm_nand_data,
+	},
+};
+
+struct platform_device msm_device_smd = {
+	.name	= "msm_smd",
+	.id	= -1,
+};
+
+static struct resource resources_sdc1[] = {
+	{
+		.start	= MSM_SDC1_PHYS,
+		.end	= MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_SDC1_0,
+		.end	= INT_SDC1_1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= 8,
+		.end	= 8,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource resources_sdc2[] = {
+	{
+		.start	= MSM_SDC2_PHYS,
+		.end	= MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_SDC2_0,
+		.end	= INT_SDC2_1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= 8,
+		.end	= 8,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource resources_sdc3[] = {
+	{
+		.start	= MSM_SDC3_PHYS,
+		.end	= MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_SDC3_0,
+		.end	= INT_SDC3_1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= 8,
+		.end	= 8,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource resources_sdc4[] = {
+	{
+		.start	= MSM_SDC4_PHYS,
+		.end	= MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_SDC4_0,
+		.end	= INT_SDC4_1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= 8,
+		.end	= 8,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device msm_device_sdc1 = {
+	.name		= "msm_sdcc",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(resources_sdc1),
+	.resource	= resources_sdc1,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+struct platform_device msm_device_sdc2 = {
+	.name		= "msm_sdcc",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(resources_sdc2),
+	.resource	= resources_sdc2,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+struct platform_device msm_device_sdc3 = {
+	.name		= "msm_sdcc",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(resources_sdc3),
+	.resource	= resources_sdc3,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+struct platform_device msm_device_sdc4 = {
+	.name		= "msm_sdcc",
+	.id		= 4,
+	.num_resources	= ARRAY_SIZE(resources_sdc4),
+	.resource	= resources_sdc4,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h
new file mode 100644
index 0000000..0744c4a
--- /dev/null
+++ b/arch/arm/mach-msm/devices.h
@@ -0,0 +1,36 @@
+/* linux/arch/arm/mach-msm/devices.h
+ *
+ * Copyright (C) 2008 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_DEVICES_H
+#define __ARCH_ARM_MACH_MSM_DEVICES_H
+
+extern struct platform_device msm_device_uart1;
+extern struct platform_device msm_device_uart2;
+extern struct platform_device msm_device_uart3;
+
+extern struct platform_device msm_device_sdc1;
+extern struct platform_device msm_device_sdc2;
+extern struct platform_device msm_device_sdc3;
+extern struct platform_device msm_device_sdc4;
+
+extern struct platform_device msm_device_hsusb;
+
+extern struct platform_device msm_device_i2c;
+
+extern struct platform_device msm_device_smd;
+
+extern struct platform_device msm_device_nand;
+
+#endif
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index 0c8f252..f5420f9 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -26,7 +26,7 @@
 };
 
 static DEFINE_SPINLOCK(msm_dmov_lock);
-static struct msm_dmov_cmd active_command;
+static unsigned int channel_active;
 static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT];
 static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT];
 unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS;
@@ -43,6 +43,11 @@
 #define PRINT_FLOW(format, args...) \
 	MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_FLOW, format, args);
 
+void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful)
+{
+	writel((graceful << 31), DMOV_FLUSH0(id));
+}
+
 void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
 {
 	unsigned long irq_flags;
@@ -60,6 +65,9 @@
 #endif
 		PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status);
 		list_add_tail(&cmd->list, &active_commands[id]);
+		if (!channel_active)
+			enable_irq(INT_ADM_AARM);
+		channel_active |= 1U << id;
 		writel(cmd->cmdptr, DMOV_CMD_PTR(id));
 	} else {
 		if (list_empty(&active_commands[id]))
@@ -76,21 +84,19 @@
 	struct completion complete;
 	unsigned id;
 	unsigned int result;
-	unsigned int flush[6];
+	struct msm_dmov_errdata err;
 };
 
-static void dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd, unsigned int result)
+static void
+dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd,
+			       unsigned int result,
+			       struct msm_dmov_errdata *err)
 {
 	struct msm_dmov_exec_cmdptr_cmd *cmd = container_of(_cmd, struct msm_dmov_exec_cmdptr_cmd, dmov_cmd);
 	cmd->result = result;
-	if (result != 0x80000002) {
-		cmd->flush[0] = readl(DMOV_FLUSH0(cmd->id));
-		cmd->flush[1] = readl(DMOV_FLUSH1(cmd->id));
-		cmd->flush[2] = readl(DMOV_FLUSH2(cmd->id));
-		cmd->flush[3] = readl(DMOV_FLUSH3(cmd->id));
-		cmd->flush[4] = readl(DMOV_FLUSH4(cmd->id));
-		cmd->flush[5] = readl(DMOV_FLUSH5(cmd->id));
-	}
+	if (result != 0x80000002 && err)
+		memcpy(&cmd->err, err, sizeof(struct msm_dmov_errdata));
+
 	complete(&cmd->complete);
 }
 
@@ -111,7 +117,7 @@
 	if (cmd.result != 0x80000002) {
 		PRINT_ERROR("dmov_exec_cmdptr(%d): ERROR, result: %x\n", id, cmd.result);
 		PRINT_ERROR("dmov_exec_cmdptr(%d):  flush: %x %x %x %x\n",
-			id, cmd.flush[0], cmd.flush[1], cmd.flush[2], cmd.flush[3]);
+			id, cmd.err.flush[0], cmd.err.flush[1], cmd.err.flush[2], cmd.err.flush[3]);
 		return -EIO;
 	}
 	PRINT_FLOW("dmov_exec_cmdptr(%d, %x) done\n", id, cmdptr);
@@ -159,25 +165,40 @@
 					"for %p, result %x\n", id, cmd, ch_result);
 				if (cmd) {
 					list_del(&cmd->list);
-					cmd->complete_func(cmd, ch_result);
+					cmd->complete_func(cmd, ch_result, NULL);
 				}
 			}
 			if (ch_result & DMOV_RSLT_FLUSH) {
-				unsigned int flush0 = readl(DMOV_FLUSH0(id));
+				struct msm_dmov_errdata errdata;
+
+				errdata.flush[0] = readl(DMOV_FLUSH0(id));
+				errdata.flush[1] = readl(DMOV_FLUSH1(id));
+				errdata.flush[2] = readl(DMOV_FLUSH2(id));
+				errdata.flush[3] = readl(DMOV_FLUSH3(id));
+				errdata.flush[4] = readl(DMOV_FLUSH4(id));
+				errdata.flush[5] = readl(DMOV_FLUSH5(id));
 				PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
-				PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, flush0);
+				PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
 				if (cmd) {
 					list_del(&cmd->list);
-					cmd->complete_func(cmd, ch_result);
+					cmd->complete_func(cmd, ch_result, &errdata);
 				}
 			}
 			if (ch_result & DMOV_RSLT_ERROR) {
-				unsigned int flush0 = readl(DMOV_FLUSH0(id));
+				struct msm_dmov_errdata errdata;
+
+				errdata.flush[0] = readl(DMOV_FLUSH0(id));
+				errdata.flush[1] = readl(DMOV_FLUSH1(id));
+				errdata.flush[2] = readl(DMOV_FLUSH2(id));
+				errdata.flush[3] = readl(DMOV_FLUSH3(id));
+				errdata.flush[4] = readl(DMOV_FLUSH4(id));
+				errdata.flush[5] = readl(DMOV_FLUSH5(id));
+
 				PRINT_ERROR("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
-				PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, flush0);
+				PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
 				if (cmd) {
 					list_del(&cmd->list);
-					cmd->complete_func(cmd, ch_result);
+					cmd->complete_func(cmd, ch_result, &errdata);
 				}
 				/* this does not seem to work, once we get an error */
 				/* the datamover will no longer accept commands */
@@ -193,8 +214,14 @@
 				writel(cmd->cmdptr, DMOV_CMD_PTR(id));
 			}
 		} while (ch_status & DMOV_STATUS_RSLT_VALID);
+		if (list_empty(&active_commands[id]) && list_empty(&ready_commands[id]))
+			channel_active &= ~(1U << id);
 		PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
 	}
+
+	if (!channel_active)
+		disable_irq(INT_ADM_AARM);
+
 	spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
 	return IRQ_HANDLED;
 }
@@ -202,12 +229,17 @@
 static int __init msm_init_datamover(void)
 {
 	int i;
+	int ret;
 	for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) {
 		INIT_LIST_HEAD(&ready_commands[i]);
 		INIT_LIST_HEAD(&active_commands[i]);
 		writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i));
 	}
-	return request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL);
+	ret = request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL);
+	if (ret)
+		return ret;
+	disable_irq(INT_ADM_AARM);
+	return 0;
 }
 
 arch_initcall(msm_init_datamover);
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
index a763949..264d62e 100644
--- a/arch/arm/mach-msm/include/mach/board.h
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -33,5 +33,6 @@
 void __init msm_map_common_io(void);
 void __init msm_init_irq(void);
 void __init msm_init_gpio(void);
+void __init msm_clock_init(void);
 
 #endif
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 528eef4..1db3c97 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -22,18 +22,22 @@
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1
 	ldreq	\rx, =MSM_UART1_PHYS
-	ldrne	\rx, =MSM_UART1_BASE
+	movne	\rx, #0
 	.endm
 
 	.macro	senduart,rd,rx
-	str	\rd, [\rx, #0x0C]
+	teq	\rx, #0
+	strne	\rd, [\rx, #0x0C]
 	.endm
 
 	.macro	waituart,rd,rx
 	@ wait for TX_READY
+	teq	\rx, #0
+	bne	2f
 1:	ldr	\rd, [\rx, #0x08]
 	tst	\rd, #0x04
 	beq	1b
+2:
 	.endm
 
 	.macro	busyuart,rd,rx
diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h
index ad1c87f..5ab5bdff 100644
--- a/arch/arm/mach-msm/include/mach/dma.h
+++ b/arch/arm/mach-msm/include/mach/dma.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-msm/include/mach/dma.h
+/* linux/include/asm-arm/arch-msm/dma.h
  *
  * Copyright (C) 2007 Google, Inc.
  *
@@ -18,17 +18,21 @@
 #include <linux/list.h>
 #include <mach/msm_iomap.h>
 
+struct msm_dmov_errdata {
+	uint32_t flush[6];
+};
+
 struct msm_dmov_cmd {
 	struct list_head list;
 	unsigned int cmdptr;
-	void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result);
-/*	void (*user_result_func)(struct msm_dmov_cmd *cmd); */
+	void (*complete_func)(struct msm_dmov_cmd *cmd,
+			      unsigned int result,
+			      struct msm_dmov_errdata *err);
 };
 
 void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
-void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd);
+void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful);
 int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
-/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */
 
 
 
@@ -122,6 +126,16 @@
 	unsigned _reserved;
 } dmov_sg;
 
+/* Box mode */
+typedef struct {
+	uint32_t cmd;
+	uint32_t src_row_addr;
+	uint32_t dst_row_addr;
+	uint32_t src_dst_len;
+	uint32_t num_rows;
+	uint32_t row_offset;
+} dmov_box;
+
 /* bits for the cmd field of the above structures */
 
 #define CMD_LC      (1 << 31)  /* last command */
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index e221f58..2f7b4c8 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -37,11 +37,17 @@
  *
  */
 
-#define MSM_VIC_BASE          0xE0000000
+#ifdef __ASSEMBLY__
+#define IOMEM(x)	x
+#else
+#define IOMEM(x)	((void __force __iomem *)(x))
+#endif
+
+#define MSM_VIC_BASE          IOMEM(0xE0000000)
 #define MSM_VIC_PHYS          0xC0000000
 #define MSM_VIC_SIZE          SZ_4K
 
-#define MSM_CSR_BASE          0xE0001000
+#define MSM_CSR_BASE          IOMEM(0xE0001000)
 #define MSM_CSR_PHYS          0xC0100000
 #define MSM_CSR_SIZE          SZ_4K
 
@@ -49,56 +55,67 @@
 #define MSM_GPT_BASE          MSM_CSR_BASE
 #define MSM_GPT_SIZE          SZ_4K
 
-#define MSM_DMOV_BASE         0xE0002000
+#define MSM_DMOV_BASE         IOMEM(0xE0002000)
 #define MSM_DMOV_PHYS         0xA9700000
 #define MSM_DMOV_SIZE         SZ_4K
 
-#define MSM_UART1_BASE        0xE0003000
-#define MSM_UART1_PHYS        0xA9A00000
-#define MSM_UART1_SIZE        SZ_4K
-
-#define MSM_UART2_BASE        0xE0004000
-#define MSM_UART2_PHYS        0xA9B00000
-#define MSM_UART2_SIZE        SZ_4K
-
-#define MSM_UART3_BASE        0xE0005000
-#define MSM_UART3_PHYS        0xA9C00000
-#define MSM_UART3_SIZE        SZ_4K
-
-#define MSM_I2C_BASE          0xE0006000
-#define MSM_I2C_PHYS          0xA9900000
-#define MSM_I2C_SIZE          SZ_4K
-
-#define MSM_GPIO1_BASE        0xE0007000
+#define MSM_GPIO1_BASE        IOMEM(0xE0003000)
 #define MSM_GPIO1_PHYS        0xA9200000
 #define MSM_GPIO1_SIZE        SZ_4K
 
-#define MSM_GPIO2_BASE        0xE0008000
+#define MSM_GPIO2_BASE        IOMEM(0xE0004000)
 #define MSM_GPIO2_PHYS        0xA9300000
 #define MSM_GPIO2_SIZE        SZ_4K
 
-#define MSM_HSUSB_BASE        0xE0009000
-#define MSM_HSUSB_PHYS        0xA0800000
-#define MSM_HSUSB_SIZE        SZ_4K
-
-#define MSM_CLK_CTL_BASE      0xE000A000
+#define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
 #define MSM_CLK_CTL_PHYS      0xA8600000
 #define MSM_CLK_CTL_SIZE      SZ_4K
 
-#define MSM_PMDH_BASE         0xE000B000
+#define MSM_SHARED_RAM_BASE   IOMEM(0xE0100000)
+#define MSM_SHARED_RAM_PHYS   0x01F00000
+#define MSM_SHARED_RAM_SIZE   SZ_1M
+
+#define MSM_UART1_PHYS        0xA9A00000
+#define MSM_UART1_SIZE        SZ_4K
+
+#define MSM_UART2_PHYS        0xA9B00000
+#define MSM_UART2_SIZE        SZ_4K
+
+#define MSM_UART3_PHYS        0xA9C00000
+#define MSM_UART3_SIZE        SZ_4K
+
+#define MSM_SDC1_PHYS         0xA0400000
+#define MSM_SDC1_SIZE         SZ_4K
+
+#define MSM_SDC2_PHYS         0xA0500000
+#define MSM_SDC2_SIZE         SZ_4K
+
+#define MSM_SDC3_PHYS         0xA0600000
+#define MSM_SDC3_SIZE         SZ_4K
+
+#define MSM_SDC4_PHYS         0xA0700000
+#define MSM_SDC4_SIZE         SZ_4K
+
+#define MSM_I2C_PHYS          0xA9900000
+#define MSM_I2C_SIZE          SZ_4K
+
+#define MSM_HSUSB_PHYS        0xA0800000
+#define MSM_HSUSB_SIZE        SZ_4K
+
 #define MSM_PMDH_PHYS         0xAA600000
 #define MSM_PMDH_SIZE         SZ_4K
 
-#define MSM_EMDH_BASE         0xE000C000
 #define MSM_EMDH_PHYS         0xAA700000
 #define MSM_EMDH_SIZE         SZ_4K
 
-#define MSM_MDP_BASE          0xE0010000
 #define MSM_MDP_PHYS          0xAA200000
 #define MSM_MDP_SIZE          0x000F0000
 
-#define MSM_SHARED_RAM_BASE   0xE0100000
-#define MSM_SHARED_RAM_PHYS   0x01F00000
-#define MSM_SHARED_RAM_SIZE   SZ_1M
+#define MSM_MDC_PHYS	      0xAA500000
+#define MSM_MDC_SIZE	      SZ_1M
+
+#define MSM_AD5_PHYS          0xAC000000
+#define MSM_AD5_SIZE          (SZ_1M*13)
+
 
 #endif
diff --git a/arch/arm/mach-msm/include/mach/vreg.h b/arch/arm/mach-msm/include/mach/vreg.h
new file mode 100644
index 0000000..9f9e25cb
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/vreg.h
@@ -0,0 +1,29 @@
+/* linux/include/asm-arm/arch-msm/vreg.h
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_VREG_H
+#define __ARCH_ARM_MACH_MSM_VREG_H
+
+struct vreg;
+
+struct vreg *vreg_get(struct device *dev, const char *id);
+void vreg_put(struct vreg *vreg);
+
+int vreg_enable(struct vreg *vreg);
+void vreg_disable(struct vreg *vreg);
+int vreg_set_level(struct vreg *vreg, unsigned mv);
+
+#endif
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 7999e4b..6e7692f 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -28,7 +28,7 @@
 #include <mach/board.h>
 
 #define MSM_DEVICE(name) { \
-		.virtual = MSM_##name##_BASE, \
+		.virtual = (unsigned long) MSM_##name##_BASE, \
 		.pfn = __phys_to_pfn(MSM_##name##_PHYS), \
 		.length = MSM_##name##_SIZE, \
 		.type = MT_DEVICE_NONSHARED, \
@@ -39,19 +39,11 @@
 	MSM_DEVICE(CSR),
 	MSM_DEVICE(GPT),
 	MSM_DEVICE(DMOV),
-	MSM_DEVICE(UART1),
-	MSM_DEVICE(UART2),
-	MSM_DEVICE(UART3),
-	MSM_DEVICE(I2C),
 	MSM_DEVICE(GPIO1),
 	MSM_DEVICE(GPIO2),
-	MSM_DEVICE(HSUSB),
 	MSM_DEVICE(CLK_CTL),
-	MSM_DEVICE(PMDH),
-	MSM_DEVICE(EMDH),
-	MSM_DEVICE(MDP),
 	{
-		.virtual =  MSM_SHARED_RAM_BASE,
+		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
 		.pfn =      __phys_to_pfn(MSM_SHARED_RAM_PHYS),
 		.length =   MSM_SHARED_RAM_SIZE,
 		.type =     MT_DEVICE,
diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c
index 04b8d18..69ca0dd 100644
--- a/arch/arm/mach-msm/irq.c
+++ b/arch/arm/mach-msm/irq.c
@@ -66,20 +66,20 @@
 
 static void msm_irq_ack(unsigned int irq)
 {
-	unsigned reg = VIC_INT_CLEAR0 + ((irq & 32) ? 4 : 0);
+	void __iomem *reg = VIC_INT_CLEAR0 + ((irq & 32) ? 4 : 0);
 	irq = 1 << (irq & 31);
 	writel(irq, reg);
 }
 
 static void msm_irq_mask(unsigned int irq)
 {
-	unsigned reg = VIC_INT_ENCLEAR0 + ((irq & 32) ? 4 : 0);
+	void __iomem *reg = VIC_INT_ENCLEAR0 + ((irq & 32) ? 4 : 0);
 	writel(1 << (irq & 31), reg);
 }
 
 static void msm_irq_unmask(unsigned int irq)
 {
-	unsigned reg = VIC_INT_ENSET0 + ((irq & 32) ? 4 : 0);
+	void __iomem *reg = VIC_INT_ENSET0 + ((irq & 32) ? 4 : 0);
 	writel(1 << (irq & 31), reg);
 }
 
@@ -90,8 +90,8 @@
 
 static int msm_irq_set_type(unsigned int irq, unsigned int flow_type)
 {
-	unsigned treg = VIC_INT_TYPE0 + ((irq & 32) ? 4 : 0);
-	unsigned preg = VIC_INT_POLARITY0 + ((irq & 32) ? 4 : 0);
+	void __iomem *treg = VIC_INT_TYPE0 + ((irq & 32) ? 4 : 0);
+	void __iomem *preg = VIC_INT_POLARITY0 + ((irq & 32) ? 4 : 0);
 	int b = 1 << (irq & 31);
 
 	if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c
new file mode 100644
index 0000000..915ee70
--- /dev/null
+++ b/arch/arm/mach-msm/proc_comm.c
@@ -0,0 +1,110 @@
+/* arch/arm/mach-msm/proc_comm.c
+ *
+ * Copyright (C) 2007-2008 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <mach/msm_iomap.h>
+#include <mach/system.h>
+
+#include "proc_comm.h"
+
+#define MSM_A2M_INT(n) (MSM_CSR_BASE + 0x400 + (n) * 4)
+
+static inline void notify_other_proc_comm(void)
+{
+	writel(1, MSM_A2M_INT(6));
+}
+
+#define APP_COMMAND 0x00
+#define APP_STATUS  0x04
+#define APP_DATA1   0x08
+#define APP_DATA2   0x0C
+
+#define MDM_COMMAND 0x10
+#define MDM_STATUS  0x14
+#define MDM_DATA1   0x18
+#define MDM_DATA2   0x1C
+
+static DEFINE_SPINLOCK(proc_comm_lock);
+
+/* The higher level SMD support will install this to
+ * provide a way to check for and handle modem restart.
+ */
+int (*msm_check_for_modem_crash)(void);
+
+/* Poll for a state change, checking for possible
+ * modem crashes along the way (so we don't wait
+ * forever while the ARM9 is blowing up).
+ *
+ * Return an error in the event of a modem crash and
+ * restart so the msm_proc_comm() routine can restart
+ * the operation from the beginning.
+ */
+static int proc_comm_wait_for(void __iomem *addr, unsigned value)
+{
+	for (;;) {
+		if (readl(addr) == value)
+			return 0;
+
+		if (msm_check_for_modem_crash)
+			if (msm_check_for_modem_crash())
+				return -EAGAIN;
+	}
+}
+
+int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
+{
+	void __iomem *base = MSM_SHARED_RAM_BASE;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&proc_comm_lock, flags);
+
+	for (;;) {
+		if (proc_comm_wait_for(base + MDM_STATUS, PCOM_READY))
+			continue;
+
+		writel(cmd, base + APP_COMMAND);
+		writel(data1 ? *data1 : 0, base + APP_DATA1);
+		writel(data2 ? *data2 : 0, base + APP_DATA2);
+
+		notify_other_proc_comm();
+
+		if (proc_comm_wait_for(base + APP_COMMAND, PCOM_CMD_DONE))
+			continue;
+
+		if (readl(base + APP_STATUS) != PCOM_CMD_FAIL) {
+			if (data1)
+				*data1 = readl(base + APP_DATA1);
+			if (data2)
+				*data2 = readl(base + APP_DATA2);
+			ret = 0;
+		} else {
+			ret = -EIO;
+		}
+		break;
+	}
+
+	writel(PCOM_CMD_IDLE, base + APP_COMMAND);
+
+	spin_unlock_irqrestore(&proc_comm_lock, flags);
+
+	return ret;
+}
+
+
diff --git a/arch/arm/mach-msm/proc_comm.h b/arch/arm/mach-msm/proc_comm.h
new file mode 100644
index 0000000..834760f
--- /dev/null
+++ b/arch/arm/mach-msm/proc_comm.h
@@ -0,0 +1,165 @@
+/* arch/arm/mach-msm/proc_comm.h
+ *
+ * Copyright (c) 2007 QUALCOMM Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _ARCH_ARM_MACH_MSM_PROC_COMM_H_
+#define _ARCH_ARM_MACH_MSM_PROC_COMM_H_
+
+enum {
+	PCOM_CMD_IDLE = 0x0,
+	PCOM_CMD_DONE,
+	PCOM_RESET_APPS,
+	PCOM_RESET_CHIP,
+	PCOM_CONFIG_NAND_MPU,
+	PCOM_CONFIG_USB_CLKS,
+	PCOM_GET_POWER_ON_STATUS,
+	PCOM_GET_WAKE_UP_STATUS,
+	PCOM_GET_BATT_LEVEL,
+	PCOM_CHG_IS_CHARGING,
+	PCOM_POWER_DOWN,
+	PCOM_USB_PIN_CONFIG,
+	PCOM_USB_PIN_SEL,
+	PCOM_SET_RTC_ALARM,
+	PCOM_NV_READ,
+	PCOM_NV_WRITE,
+	PCOM_GET_UUID_HIGH,
+	PCOM_GET_UUID_LOW,
+	PCOM_GET_HW_ENTROPY,
+	PCOM_RPC_GPIO_TLMM_CONFIG_REMOTE,
+	PCOM_CLKCTL_RPC_ENABLE,
+	PCOM_CLKCTL_RPC_DISABLE,
+	PCOM_CLKCTL_RPC_RESET,
+	PCOM_CLKCTL_RPC_SET_FLAGS,
+	PCOM_CLKCTL_RPC_SET_RATE,
+	PCOM_CLKCTL_RPC_MIN_RATE,
+	PCOM_CLKCTL_RPC_MAX_RATE,
+	PCOM_CLKCTL_RPC_RATE,
+	PCOM_CLKCTL_RPC_PLL_REQUEST,
+	PCOM_CLKCTL_RPC_ENABLED,
+	PCOM_VREG_SWITCH,
+	PCOM_VREG_SET_LEVEL,
+	PCOM_GPIO_TLMM_CONFIG_GROUP,
+	PCOM_GPIO_TLMM_UNCONFIG_GROUP,
+	PCOM_NV_WRITE_BYTES_4_7,
+	PCOM_CONFIG_DISP,
+	PCOM_GET_FTM_BOOT_COUNT,
+	PCOM_RPC_GPIO_TLMM_CONFIG_EX,
+	PCOM_PM_MPP_CONFIG,
+	PCOM_GPIO_IN,
+	PCOM_GPIO_OUT,
+	PCOM_RESET_MODEM,
+	PCOM_RESET_CHIP_IMM,
+	PCOM_PM_VID_EN,
+	PCOM_VREG_PULLDOWN,
+	PCOM_NUM_CMDS,
+};
+
+enum {
+	 PCOM_INVALID_STATUS = 0x0,
+	 PCOM_READY,
+	 PCOM_CMD_RUNNING,
+	 PCOM_CMD_SUCCESS,
+	 PCOM_CMD_FAIL,
+};
+
+/* List of VREGs that support the Pull Down Resistor setting. */
+enum {
+	PM_VREG_PDOWN_MSMA_ID,
+	PM_VREG_PDOWN_MSMP_ID,
+	PM_VREG_PDOWN_MSME1_ID,	/* Not supported in Panoramix */
+	PM_VREG_PDOWN_MSMC1_ID,	/* Not supported in PM6620 */
+	PM_VREG_PDOWN_MSMC2_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_GP3_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_MSME2_ID,	/* Supported in PM7500 and Panoramix only */
+	PM_VREG_PDOWN_GP4_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_GP1_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_TCXO_ID,
+	PM_VREG_PDOWN_PA_ID,
+	PM_VREG_PDOWN_RFTX_ID,
+	PM_VREG_PDOWN_RFRX1_ID,
+	PM_VREG_PDOWN_RFRX2_ID,
+	PM_VREG_PDOWN_SYNT_ID,
+	PM_VREG_PDOWN_WLAN_ID,
+	PM_VREG_PDOWN_USB_ID,
+	PM_VREG_PDOWN_MMC_ID,
+	PM_VREG_PDOWN_RUIM_ID,
+	PM_VREG_PDOWN_MSMC0_ID,	/* Supported in PM6610 only */
+	PM_VREG_PDOWN_GP2_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_GP5_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_GP6_ID,	/* Supported in PM7500 only */
+	PM_VREG_PDOWN_RF_ID,
+	PM_VREG_PDOWN_RF_VCO_ID,
+	PM_VREG_PDOWN_MPLL_ID,
+	PM_VREG_PDOWN_S2_ID,
+	PM_VREG_PDOWN_S3_ID,
+	PM_VREG_PDOWN_RFUBM_ID,
+
+	/* new for HAN */
+	PM_VREG_PDOWN_RF1_ID,
+	PM_VREG_PDOWN_RF2_ID,
+	PM_VREG_PDOWN_RFA_ID,
+	PM_VREG_PDOWN_CDC2_ID,
+	PM_VREG_PDOWN_RFTX2_ID,
+	PM_VREG_PDOWN_USIM_ID,
+	PM_VREG_PDOWN_USB2P6_ID,
+	PM_VREG_PDOWN_USB3P3_ID,
+	PM_VREG_PDOWN_INVALID_ID,
+
+	/* backward compatible enums only */
+	PM_VREG_PDOWN_CAM_ID = PM_VREG_PDOWN_GP1_ID,
+	PM_VREG_PDOWN_MDDI_ID = PM_VREG_PDOWN_GP2_ID,
+	PM_VREG_PDOWN_RUIM2_ID = PM_VREG_PDOWN_GP3_ID,
+	PM_VREG_PDOWN_AUX_ID = PM_VREG_PDOWN_GP4_ID,
+	PM_VREG_PDOWN_AUX2_ID = PM_VREG_PDOWN_GP5_ID,
+	PM_VREG_PDOWN_BT_ID = PM_VREG_PDOWN_GP6_ID,
+
+	PM_VREG_PDOWN_MSME_ID = PM_VREG_PDOWN_MSME1_ID,
+	PM_VREG_PDOWN_MSMC_ID = PM_VREG_PDOWN_MSMC1_ID,
+	PM_VREG_PDOWN_RFA1_ID = PM_VREG_PDOWN_RFRX2_ID,
+	PM_VREG_PDOWN_RFA2_ID = PM_VREG_PDOWN_RFTX2_ID,
+	PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID
+};
+
+/* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */
+
+#define GPIO_ENABLE	0
+#define GPIO_DISABLE	1
+
+#define GPIO_INPUT	0
+#define GPIO_OUTPUT	1
+
+#define GPIO_NO_PULL	0
+#define GPIO_PULL_DOWN	1
+#define GPIO_KEEPER	2
+#define GPIO_PULL_UP	3
+
+#define GPIO_2MA	0
+#define GPIO_4MA	1
+#define GPIO_6MA	2
+#define GPIO_8MA	3
+#define GPIO_10MA	4
+#define GPIO_12MA	5
+#define GPIO_14MA	6
+#define GPIO_16MA	7
+
+#define PCOM_GPIO_CFG(gpio, func, dir, pull, drvstr) \
+		((((gpio) & 0x3FF) << 4)	| \
+		((func) & 0xf)			| \
+		(((dir) & 0x1) << 14)		| \
+		(((pull) & 0x3) << 15)		| \
+		(((drvstr) & 0xF) << 17))
+
+int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2);
+
+#endif
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 2bffe9b..345a14c 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -45,7 +45,7 @@
 	struct clock_event_device   clockevent;
 	struct clocksource          clocksource;
 	struct irqaction            irq;
-	uint32_t                    regbase;
+	void __iomem                *regbase;
 	uint32_t                    freq;
 	uint32_t                    shift;
 };
diff --git a/arch/arm/mach-msm/vreg.c b/arch/arm/mach-msm/vreg.c
new file mode 100644
index 0000000..fcb0b9f
--- /dev/null
+++ b/arch/arm/mach-msm/vreg.c
@@ -0,0 +1,143 @@
+/* arch/arm/mach-msm/vreg.c
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <mach/vreg.h>
+
+#include "proc_comm.h"
+
+struct vreg {
+	const char *name;
+	unsigned id;
+};
+
+#define VREG(_name, _id) { .name = _name, .id = _id, }
+
+static struct vreg vregs[] = {
+	VREG("msma",	0),
+	VREG("msmp",	1),
+	VREG("msme1",	2),
+	VREG("msmc1",	3),
+	VREG("msmc2",	4),
+	VREG("gp3",	5),
+	VREG("msme2",	6),
+	VREG("gp4",	7),
+	VREG("gp1",	8),
+	VREG("tcxo",	9),
+	VREG("pa",	10),
+	VREG("rftx",	11),
+	VREG("rfrx1",	12),
+	VREG("rfrx2",	13),
+	VREG("synt",	14),
+	VREG("wlan",	15),
+	VREG("usb",	16),
+	VREG("boost",	17),
+	VREG("mmc",	18),
+	VREG("ruim",	19),
+	VREG("msmc0",	20),
+	VREG("gp2",	21),
+	VREG("gp5",	22),
+	VREG("gp6",	23),
+	VREG("rf",	24),
+	VREG("rf_vco",	26),
+	VREG("mpll",	27),
+	VREG("s2",	28),
+	VREG("s3",	29),
+	VREG("rfubm",	30),
+	VREG("ncp",	31),
+};
+
+struct vreg *vreg_get(struct device *dev, const char *id)
+{
+	int n;
+	for (n = 0; n < ARRAY_SIZE(vregs); n++) {
+		if (!strcmp(vregs[n].name, id))
+			return vregs + n;
+	}
+	return 0;
+}
+
+void vreg_put(struct vreg *vreg)
+{
+}
+
+int vreg_enable(struct vreg *vreg)
+{
+	unsigned id = vreg->id;
+	unsigned enable = 1;
+	return msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
+}
+
+void vreg_disable(struct vreg *vreg)
+{
+	unsigned id = vreg->id;
+	unsigned enable = 0;
+	msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
+}
+
+int vreg_set_level(struct vreg *vreg, unsigned mv)
+{
+	unsigned id = vreg->id;
+	return msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv);
+}
+
+#if defined(CONFIG_DEBUG_FS)
+
+static int vreg_debug_set(void *data, u64 val)
+{
+	struct vreg *vreg = data;
+	switch (val) {
+	case 0:
+		vreg_disable(vreg);
+		break;
+	case 1:
+		vreg_enable(vreg);
+		break;
+	default:
+		vreg_set_level(vreg, val);
+		break;
+	}
+	return 0;
+}
+
+static int vreg_debug_get(void *data, u64 *val)
+{
+	return -ENOSYS;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(vreg_fops, vreg_debug_get, vreg_debug_set, "%llu\n");
+
+static int __init vreg_debug_init(void)
+{
+	struct dentry *dent;
+	int n;
+
+	dent = debugfs_create_dir("vreg", 0);
+	if (IS_ERR(dent))
+		return 0;
+
+	for (n = 0; n < ARRAY_SIZE(vregs); n++)
+		(void) debugfs_create_file(vregs[n].name, 0644,
+					   dent, vregs + n, &vreg_fops);
+
+	return 0;
+}
+
+device_initcall(vreg_debug_init);
+#endif
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 49f434c..2e285bb 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -28,10 +29,14 @@
 
 static struct mv643xx_eth_platform_data db78x00_ge10_data = {
 	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static struct mv643xx_eth_platform_data db78x00_ge11_data = {
 	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static struct mv_sata_platform_data db78x00_sata_data = {
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 9625ef5..437065c 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -19,6 +19,7 @@
 #include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
 #include <linux/spi/orion_spi.h>
+#include <net/dsa.h>
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <asm/timex.h>
@@ -198,6 +199,40 @@
 
 
 /*****************************************************************************
+ * Ethernet switch
+ ****************************************************************************/
+static struct resource orion5x_switch_resources[] = {
+	{
+		.start	= 0,
+		.end	= 0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device orion5x_switch_device = {
+	.name		= "dsa",
+	.id		= 0,
+	.num_resources	= 0,
+	.resource	= orion5x_switch_resources,
+};
+
+void __init orion5x_eth_switch_init(struct dsa_platform_data *d, int irq)
+{
+	if (irq != NO_IRQ) {
+		orion5x_switch_resources[0].start = irq;
+		orion5x_switch_resources[0].end = irq;
+		orion5x_switch_device.num_resources = 1;
+	}
+
+	d->mii_bus = &orion5x_eth_shared.dev;
+	d->netdev = &orion5x_eth.dev;
+	orion5x_switch_device.dev.platform_data = d;
+
+	platform_device_register(&orion5x_switch_device);
+}
+
+
+/*****************************************************************************
  * I2C
  ****************************************************************************/
 static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
@@ -275,7 +310,8 @@
  * SPI
  ****************************************************************************/
 static struct orion_spi_info orion5x_spi_plat_data = {
-	.tclk		= 0,
+	.tclk			= 0,
+	.enable_clock_fix	= 1,
 };
 
 static struct resource orion5x_spi_resources[] = {
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 1f8b2da..a000c7c 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -1,6 +1,7 @@
 #ifndef __ARCH_ORION5X_COMMON_H
 #define __ARCH_ORION5X_COMMON_H
 
+struct dsa_platform_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
@@ -29,6 +30,7 @@
 void orion5x_ehci0_init(void);
 void orion5x_ehci1_init(void);
 void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
+void orion5x_eth_switch_init(struct dsa_platform_data *d, int irq);
 void orion5x_i2c_init(void);
 void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
 void orion5x_spi_init(void);
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 500cdada..15f5323 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -16,6 +16,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
@@ -93,6 +94,15 @@
 	.duplex		= DUPLEX_FULL,
 };
 
+static struct dsa_platform_data rd88f5181l_fxo_switch_data = {
+	.port_names[0]	= "lan2",
+	.port_names[1]	= "lan1",
+	.port_names[2]	= "wan",
+	.port_names[3]	= "cpu",
+	.port_names[5]	= "lan4",
+	.port_names[7]	= "lan3",
+};
+
 static void __init rd88f5181l_fxo_init(void)
 {
 	/*
@@ -107,6 +117,7 @@
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
+	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_data, NO_IRQ);
 	orion5x_uart0_init();
 
 	orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index ebde814..8ad3934 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -17,6 +17,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <linux/i2c.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
@@ -94,6 +95,15 @@
 	.duplex		= DUPLEX_FULL,
 };
 
+static struct dsa_platform_data rd88f5181l_ge_switch_data = {
+	.port_names[0]	= "lan2",
+	.port_names[1]	= "lan1",
+	.port_names[2]	= "wan",
+	.port_names[3]	= "cpu",
+	.port_names[5]	= "lan4",
+	.port_names[7]	= "lan3",
+};
+
 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
 	I2C_BOARD_INFO("ds1338", 0x68),
 };
@@ -112,6 +122,7 @@
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_ge_eth_data);
+	orion5x_eth_switch_init(&rd88f5181l_ge_switch_data, gpio_to_irq(8));
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 40e0495..262e25e 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -19,6 +19,7 @@
 #include <linux/spi/orion_spi.h>
 #include <linux/spi/flash.h>
 #include <linux/ethtool.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
@@ -34,6 +35,15 @@
 	.duplex		= DUPLEX_FULL,
 };
 
+static struct dsa_platform_data rd88f6183ap_ge_switch_data = {
+	.port_names[0]	= "lan1",
+	.port_names[1]	= "lan2",
+	.port_names[2]	= "lan3",
+	.port_names[3]	= "lan4",
+	.port_names[4]	= "wan",
+	.port_names[5]	= "cpu",
+};
+
 static struct mtd_partition rd88f6183ap_ge_partitions[] = {
 	{
 		.name	= "kernel",
@@ -79,6 +89,7 @@
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
+	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_data, gpio_to_irq(3));
 	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
 				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
 	orion5x_spi_init();
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 9a4fd52..cc8f892 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -15,6 +15,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -105,6 +106,15 @@
 	.duplex		= DUPLEX_FULL,
 };
 
+static struct dsa_platform_data wrt350n_v2_switch_data = {
+	.port_names[0]	= "lan2",
+	.port_names[1]	= "lan1",
+	.port_names[2]	= "wan",
+	.port_names[3]	= "cpu",
+	.port_names[5]	= "lan3",
+	.port_names[7]	= "lan4",
+};
+
 static void __init wrt350n_v2_init(void)
 {
 	/*
@@ -119,6 +129,7 @@
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&wrt350n_v2_eth_data);
+	orion5x_eth_switch_init(&wrt350n_v2_switch_data, NO_IRQ);
 	orion5x_uart0_init();
 
 	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index f27f6b3..a062235 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -71,6 +71,14 @@
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
+config CORGI_SSP_DEPRECATED
+	bool
+	select PXA_SSP
+	help
+	  This option will include corgi_ssp.c and corgi_lcd.c
+	  that corgi_ts.c and other legacy drivers (corgi_bl.c
+	  and sharpsl_pm.c) may depend on.
+
 config MACH_POODLE
 	bool "Enable Sharp SL-5600 (Poodle) Support"
 	depends on PXA_SHARPSL
@@ -257,7 +265,6 @@
 	bool "CompuLab CM-X255/CM-X270 modules"
 	select PXA27x
 	select IWMMXT
-	select ZONE_DMA if PCI
 	select PXA25x
 	select PXA_SSP
 
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index d31c997..d64c68b 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -37,6 +37,7 @@
 obj-$(CONFIG_MACH_COLIBRI)	+= colibri.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
+obj-$(CONFIG_CORGI_SSP_DEPRECATED)	+= corgi_ssp.o corgi_lcd.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_PCM027)	+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
new file mode 100644
index 0000000..411607b
--- /dev/null
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -0,0 +1,289 @@
+/*
+ * linux/arch/arm/mach-pxa/corgi_lcd.c
+ *
+ * Corgi/Spitz LCD Specific Code
+ *
+ * Copyright (C) 2005 Richard Purdie
+ *
+ * Connectivity:
+ *   Corgi - LCD to ATI Imageon w100 (Wallaby)
+ *   Spitz - LCD to PXA Framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
+#include <asm/hardware/scoop.h>
+#include <asm/mach/sharpsl_param.h>
+#include "generic.h"
+
+/* Register Addresses */
+#define RESCTL_ADRS     0x00
+#define PHACTRL_ADRS    0x01
+#define DUTYCTRL_ADRS   0x02
+#define POWERREG0_ADRS  0x03
+#define POWERREG1_ADRS  0x04
+#define GPOR3_ADRS      0x05
+#define PICTRL_ADRS     0x06
+#define POLCTRL_ADRS    0x07
+
+/* Register Bit Definitions */
+#define RESCTL_QVGA     0x01
+#define RESCTL_VGA      0x00
+
+#define POWER1_VW_ON    0x01  /* VW Supply FET ON */
+#define POWER1_GVSS_ON  0x02  /* GVSS(-8V) Power Supply ON */
+#define POWER1_VDD_ON   0x04  /* VDD(8V),SVSS(-4V) Power Supply ON */
+
+#define POWER1_VW_OFF   0x00  /* VW Supply FET OFF */
+#define POWER1_GVSS_OFF 0x00  /* GVSS(-8V) Power Supply OFF */
+#define POWER1_VDD_OFF  0x00  /* VDD(8V),SVSS(-4V) Power Supply OFF */
+
+#define POWER0_COM_DCLK 0x01  /* COM Voltage DC Bias DAC Serial Data Clock */
+#define POWER0_COM_DOUT 0x02  /* COM Voltage DC Bias DAC Serial Data Out */
+#define POWER0_DAC_ON   0x04  /* DAC Power Supply ON */
+#define POWER0_COM_ON   0x08  /* COM Power Supply ON */
+#define POWER0_VCC5_ON  0x10  /* VCC5 Power Supply ON */
+
+#define POWER0_DAC_OFF  0x00  /* DAC Power Supply OFF */
+#define POWER0_COM_OFF  0x00  /* COM Power Supply OFF */
+#define POWER0_VCC5_OFF 0x00  /* VCC5 Power Supply OFF */
+
+#define PICTRL_INIT_STATE      0x01
+#define PICTRL_INIOFF          0x02
+#define PICTRL_POWER_DOWN      0x04
+#define PICTRL_COM_SIGNAL_OFF  0x08
+#define PICTRL_DAC_SIGNAL_OFF  0x10
+
+#define POLCTRL_SYNC_POL_FALL  0x01
+#define POLCTRL_EN_POL_FALL    0x02
+#define POLCTRL_DATA_POL_FALL  0x04
+#define POLCTRL_SYNC_ACT_H     0x08
+#define POLCTRL_EN_ACT_L       0x10
+
+#define POLCTRL_SYNC_POL_RISE  0x00
+#define POLCTRL_EN_POL_RISE    0x00
+#define POLCTRL_DATA_POL_RISE  0x00
+#define POLCTRL_SYNC_ACT_L     0x00
+#define POLCTRL_EN_ACT_H       0x00
+
+#define PHACTRL_PHASE_MANUAL   0x01
+#define DEFAULT_PHAD_QVGA     (9)
+#define DEFAULT_COMADJ        (125)
+
+/*
+ * This is only a psuedo I2C interface. We can't use the standard kernel
+ * routines as the interface is write only. We just assume the data is acked...
+ */
+static void lcdtg_ssp_i2c_send(u8 data)
+{
+	corgi_ssp_lcdtg_send(POWERREG0_ADRS, data);
+	udelay(10);
+}
+
+static void lcdtg_i2c_send_bit(u8 data)
+{
+	lcdtg_ssp_i2c_send(data);
+	lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
+	lcdtg_ssp_i2c_send(data);
+}
+
+static void lcdtg_i2c_send_start(u8 base)
+{
+	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
+	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
+	lcdtg_ssp_i2c_send(base);
+}
+
+static void lcdtg_i2c_send_stop(u8 base)
+{
+	lcdtg_ssp_i2c_send(base);
+	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
+	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
+}
+
+static void lcdtg_i2c_send_byte(u8 base, u8 data)
+{
+	int i;
+	for (i = 0; i < 8; i++) {
+		if (data & 0x80)
+			lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
+		else
+			lcdtg_i2c_send_bit(base);
+		data <<= 1;
+	}
+}
+
+static void lcdtg_i2c_wait_ack(u8 base)
+{
+	lcdtg_i2c_send_bit(base);
+}
+
+static void lcdtg_set_common_voltage(u8 base_data, u8 data)
+{
+	/* Set Common Voltage to M62332FP via I2C */
+	lcdtg_i2c_send_start(base_data);
+	lcdtg_i2c_send_byte(base_data, 0x9c);
+	lcdtg_i2c_wait_ack(base_data);
+	lcdtg_i2c_send_byte(base_data, 0x00);
+	lcdtg_i2c_wait_ack(base_data);
+	lcdtg_i2c_send_byte(base_data, data);
+	lcdtg_i2c_wait_ack(base_data);
+	lcdtg_i2c_send_stop(base_data);
+}
+
+/* Set Phase Adjust */
+static void lcdtg_set_phadadj(int mode)
+{
+	int adj;
+	switch(mode) {
+		case 480:
+		case 640:
+			/* Setting for VGA */
+			adj = sharpsl_param.phadadj;
+			if (adj < 0) {
+				adj = PHACTRL_PHASE_MANUAL;
+			} else {
+				adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
+			}
+			break;
+		case 240:
+		case 320:
+		default:
+			/* Setting for QVGA */
+			adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
+			break;
+	}
+
+	corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj);
+}
+
+static int lcd_inited;
+
+void corgi_lcdtg_hw_init(int mode)
+{
+	if (!lcd_inited) {
+		int comadj;
+
+		/* Initialize Internal Logic & Port */
+		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE
+	  			| PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF);
+
+		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF
+				| POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
+
+		/* VDD(+8V), SVSS(-4V) ON */
+		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
+		mdelay(3);
+
+		/* DAC ON */
+		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
+				| POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+		/* INIB = H, INI = L  */
+		/* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
+		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
+
+		/* Set Common Voltage */
+		comadj = sharpsl_param.comadj;
+		if (comadj < 0)
+			comadj = DEFAULT_COMADJ;
+		lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
+
+		/* VCC5 ON, DAC ON */
+		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
+				POWER0_COM_OFF | POWER0_VCC5_ON);
+
+		/* GVSS(-8V) ON, VDD ON */
+		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
+		mdelay(2);
+
+		/* COM SIGNAL ON (PICTL[3] = L) */
+		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE);
+
+		/* COM ON, DAC ON, VCC5_ON */
+		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
+				| POWER0_COM_ON | POWER0_VCC5_ON);
+
+		/* VW ON, GVSS ON, VDD ON */
+		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
+
+		/* Signals output enable */
+		corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
+
+		/* Set Phase Adjust */
+		lcdtg_set_phadadj(mode);
+
+		/* Initialize for Input Signals from ATI */
+		corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE
+				| POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H);
+		udelay(1000);
+
+		lcd_inited=1;
+	} else {
+		lcdtg_set_phadadj(mode);
+	}
+
+	switch(mode) {
+		case 480:
+		case 640:
+			/* Set Lcd Resolution (VGA) */
+			corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA);
+			break;
+		case 240:
+		case 320:
+		default:
+			/* Set Lcd Resolution (QVGA) */
+			corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA);
+			break;
+	}
+}
+
+void corgi_lcdtg_suspend(void)
+{
+	/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
+	mdelay(34);
+
+	/* (1)VW OFF */
+	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
+
+	/* (2)COM OFF */
+	corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
+	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
+
+	/* (3)Set Common Voltage Bias 0V */
+	lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
+
+	/* (4)GVSS OFF */
+	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
+
+	/* (5)VCC5 OFF */
+	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+	/* (6)Set PDWN, INIOFF, DACOFF */
+	corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
+			PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
+
+	/* (7)DAC OFF */
+	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+	/* (8)VDD OFF */
+	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
+
+	lcd_inited = 0;
+}
+
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
new file mode 100644
index 0000000..8e2f221
--- /dev/null
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -0,0 +1,276 @@
+/*
+ *  SSP control code for Sharp Corgi devices
+ *
+ *  Copyright (c) 2004-2005 Richard Purdie
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/regs-ssp.h>
+#include "sharpsl.h"
+
+static DEFINE_SPINLOCK(corgi_ssp_lock);
+static struct ssp_dev corgi_ssp_dev;
+static struct ssp_state corgi_ssp_state;
+static struct corgissp_machinfo *ssp_machinfo;
+
+/*
+ * There are three devices connected to the SSP interface:
+ *   1. A touchscreen controller (TI ADS7846 compatible)
+ *   2. An LCD controller (with some Backlight functionality)
+ *   3. A battery monitoring IC (Maxim MAX1111)
+ *
+ * Each device uses a different speed/mode of communication.
+ *
+ * The touchscreen is very sensitive and the most frequently used
+ * so the port is left configured for this.
+ *
+ * Devices are selected using Chip Selects on GPIOs.
+ */
+
+/*
+ *  ADS7846 Routines
+ */
+unsigned long corgi_ssp_ads7846_putget(ulong data)
+{
+	unsigned long flag;
+	u32 ret = 0;
+
+	spin_lock_irqsave(&corgi_ssp_lock, flag);
+	if (ssp_machinfo->cs_ads7846 >= 0)
+		GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
+
+	ssp_write_word(&corgi_ssp_dev,data);
+ 	ssp_read_word(&corgi_ssp_dev, &ret);
+
+	if (ssp_machinfo->cs_ads7846 >= 0)
+		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
+	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
+
+	return ret;
+}
+
+/*
+ * NOTE: These functions should always be called in interrupt context
+ * and use the _lock and _unlock functions. They are very time sensitive.
+ */
+void corgi_ssp_ads7846_lock(void)
+{
+	spin_lock(&corgi_ssp_lock);
+	if (ssp_machinfo->cs_ads7846 >= 0)
+		GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
+}
+
+void corgi_ssp_ads7846_unlock(void)
+{
+	if (ssp_machinfo->cs_ads7846 >= 0)
+		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
+	spin_unlock(&corgi_ssp_lock);
+}
+
+void corgi_ssp_ads7846_put(ulong data)
+{
+	ssp_write_word(&corgi_ssp_dev,data);
+}
+
+unsigned long corgi_ssp_ads7846_get(void)
+{
+	u32 ret = 0;
+	ssp_read_word(&corgi_ssp_dev, &ret);
+	return ret;
+}
+
+EXPORT_SYMBOL(corgi_ssp_ads7846_putget);
+EXPORT_SYMBOL(corgi_ssp_ads7846_lock);
+EXPORT_SYMBOL(corgi_ssp_ads7846_unlock);
+EXPORT_SYMBOL(corgi_ssp_ads7846_put);
+EXPORT_SYMBOL(corgi_ssp_ads7846_get);
+
+
+/*
+ *  LCD/Backlight Routines
+ */
+unsigned long corgi_ssp_dac_put(ulong data)
+{
+	unsigned long flag, sscr1 = SSCR1_SPH;
+	u32 tmp;
+
+	spin_lock_irqsave(&corgi_ssp_lock, flag);
+
+	if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi())
+		sscr1 = 0;
+
+	ssp_disable(&corgi_ssp_dev);
+	ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon));
+	ssp_enable(&corgi_ssp_dev);
+
+	if (ssp_machinfo->cs_lcdcon >= 0)
+		GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
+	ssp_write_word(&corgi_ssp_dev,data);
+	/* Read null data back from device to prevent SSP overflow */
+	ssp_read_word(&corgi_ssp_dev, &tmp);
+	if (ssp_machinfo->cs_lcdcon >= 0)
+		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
+
+	ssp_disable(&corgi_ssp_dev);
+	ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
+	ssp_enable(&corgi_ssp_dev);
+
+	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
+
+	return 0;
+}
+
+void corgi_ssp_lcdtg_send(u8 adrs, u8 data)
+{
+	corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f));
+}
+
+void corgi_ssp_blduty_set(int duty)
+{
+	corgi_ssp_lcdtg_send(0x02,duty);
+}
+
+EXPORT_SYMBOL(corgi_ssp_lcdtg_send);
+EXPORT_SYMBOL(corgi_ssp_blduty_set);
+
+/*
+ *  Max1111 Routines
+ */
+int corgi_ssp_max1111_get(ulong data)
+{
+	unsigned long flag;
+	long voltage = 0, voltage1 = 0, voltage2 = 0;
+
+	spin_lock_irqsave(&corgi_ssp_lock, flag);
+	if (ssp_machinfo->cs_max1111 >= 0)
+		GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
+	ssp_disable(&corgi_ssp_dev);
+	ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111));
+	ssp_enable(&corgi_ssp_dev);
+
+	udelay(1);
+
+	/* TB1/RB1 */
+	ssp_write_word(&corgi_ssp_dev,data);
+	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */
+
+	/* TB12/RB2 */
+	ssp_write_word(&corgi_ssp_dev,0);
+	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1);
+
+	/* TB13/RB3*/
+	ssp_write_word(&corgi_ssp_dev,0);
+	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2);
+
+	ssp_disable(&corgi_ssp_dev);
+	ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
+	ssp_enable(&corgi_ssp_dev);
+	if (ssp_machinfo->cs_max1111 >= 0)
+		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
+	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
+
+	if (voltage1 & 0xc0 || voltage2 & 0x3f)
+		voltage = -1;
+	else
+		voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03);
+
+	return voltage;
+}
+
+EXPORT_SYMBOL(corgi_ssp_max1111_get);
+
+/*
+ *  Support Routines
+ */
+
+void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo)
+{
+	ssp_machinfo = machinfo;
+}
+
+static int __init corgi_ssp_probe(struct platform_device *dev)
+{
+	int ret;
+
+	/* Chip Select - Disable All */
+	if (ssp_machinfo->cs_lcdcon >= 0)
+		pxa_gpio_mode(ssp_machinfo->cs_lcdcon  | GPIO_OUT | GPIO_DFLT_HIGH);
+	if (ssp_machinfo->cs_max1111 >= 0)
+	        pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH);
+	if (ssp_machinfo->cs_ads7846 >= 0)
+        	pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH);
+
+	ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
+
+	if (ret)
+		printk(KERN_ERR "Unable to register SSP handler!\n");
+	else {
+		ssp_disable(&corgi_ssp_dev);
+		ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
+		ssp_enable(&corgi_ssp_dev);
+	}
+
+	return ret;
+}
+
+static int corgi_ssp_remove(struct platform_device *dev)
+{
+	ssp_exit(&corgi_ssp_dev);
+	return 0;
+}
+
+static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state)
+{
+	ssp_flush(&corgi_ssp_dev);
+	ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
+
+	return 0;
+}
+
+static int corgi_ssp_resume(struct platform_device *dev)
+{
+	if (ssp_machinfo->cs_lcdcon >= 0)
+		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);  /* High - Disable LCD Control/Timing Gen */
+	if (ssp_machinfo->cs_max1111 >= 0)
+		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
+	if (ssp_machinfo->cs_ads7846 >= 0)
+		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
+	ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
+	ssp_enable(&corgi_ssp_dev);
+
+	return 0;
+}
+
+static struct platform_driver corgissp_driver = {
+	.probe		= corgi_ssp_probe,
+	.remove		= corgi_ssp_remove,
+	.suspend	= corgi_ssp_suspend,
+	.resume		= corgi_ssp_resume,
+	.driver		= {
+		.name	= "corgi-ssp",
+	},
+};
+
+int __init corgi_ssp_init(void)
+{
+	return platform_driver_register(&corgissp_driver);
+}
+
+arch_initcall(corgi_ssp_init);
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index 585970e..7239281 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -113,6 +113,7 @@
  * Shared data structures
  */
 extern struct platform_device corgiscoop_device;
+extern struct platform_device corgissp_device;
 
 #endif /* __ASM_ARCH_CORGI_H  */
 
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 9c163e1..32bb4a2 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -9,7 +9,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H
 
 #ifdef CONFIG_PXA_HAVE_ISA_IRQS
 #define PXA_ISA_IRQ(x)	(x)
@@ -264,3 +265,5 @@
 #endif
 
 #endif /* CONFIG_PCI_HOST_ITE8152 */
+
+#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index 31ac26b..fa1998c 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -142,7 +142,7 @@
 
 #define SPITZ_SCP2_GPIO_BASE		(NR_BUILTIN_GPIO + 12)
 #define SPITZ_GPIO_IR_ON		(SPITZ_SCP2_GPIO_BASE + 0)
-#define SPITZ_GPIO_AKIN_PULLUP		(SPITZ_SCP2_GPIO_BASE + 1
+#define SPITZ_GPIO_AKIN_PULLUP		(SPITZ_SCP2_GPIO_BASE + 1)
 #define SPITZ_GPIO_RESERVED_1		(SPITZ_SCP2_GPIO_BASE + 2)
 #define SPITZ_GPIO_RESERVED_2		(SPITZ_SCP2_GPIO_BASE + 3)
 #define SPITZ_GPIO_RESERVED_3		(SPITZ_SCP2_GPIO_BASE + 4)
@@ -187,4 +187,5 @@
  */
 extern struct platform_device spitzscoop_device;
 extern struct platform_device spitzscoop2_device;
+extern struct platform_device spitzssp_device;
 extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index 8bce6d8..4df2d38 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -193,4 +193,7 @@
 #define TOSA_KEY_MAIL		KEY_MAIL
 #endif
 
+struct spi_device;
+extern int tosa_bl_enable(struct spi_device *spi, int enable);
+
 #endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
index 316cd986..74e2ead 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/mach-pxa/pwm.c
@@ -60,7 +60,7 @@
 	do_div(c, 1000000000);
 	period_cycles = c;
 
-	if (period_cycles < 0)
+	if (period_cycles < 1)
 		period_cycles = 1;
 	prescale = (period_cycles - 1) / 1024;
 	pv = period_cycles / (prescale + 1) - 1;
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 15c2f1a..f0845c1 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -116,20 +116,33 @@
 	{   0,   0},
 };
 
+/* MAX1111 Commands */
+#define MAXCTRL_PD0      1u << 0
+#define MAXCTRL_PD1      1u << 1
+#define MAXCTRL_SGL      1u << 2
+#define MAXCTRL_UNI      1u << 3
+#define MAXCTRL_SEL_SH   4
+#define MAXCTRL_STR      1u << 7
+
 /*
  * Read MAX1111 ADC
  */
-extern int max1111_read_channel(int);
-
 int sharpsl_pm_pxa_read_max1111(int channel)
 {
 	if (machine_is_tosa()) // Ugly, better move this function into another module
 	    return 0;
 
+#ifdef CONFIG_CORGI_SSP_DEPRECATED
+	return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
+			| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
+#else
+	extern int max1111_read_channel(int);
+
 	/* max1111 accepts channels from 0-3, however,
 	 * it is encoded from 0-7 here in the code.
 	 */
 	return max1111_read_channel(channel >> 1);
+#endif
 }
 
 void sharpsl_pm_pxa_init(void)
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index a6c4694..224897a 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -31,6 +31,7 @@
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
 #include <linux/rfkill.h>
+#include <linux/spi/spi.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -42,6 +43,7 @@
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/tosa_bt.h>
+#include <mach/pxa2xx_spi.h>
 
 #include <asm/mach/arch.h>
 #include <mach/tosa.h>
@@ -612,7 +614,7 @@
 	rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
 	if (rc)
 		goto err_req_suspend;
-	rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v");
+	rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "tc6393xb l3v");
 	if (rc)
 		goto err_req_l3v;
 	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
@@ -772,6 +774,20 @@
 	.dev.platform_data = &tosa_bt_data,
 };
 
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+	.num_chipselect	= 1,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias	= "tosa-lcd",
+		// .platform_data
+		.max_speed_hz	= 28750,
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
 
 static struct platform_device *devices[] __initdata = {
 	&tosascoop_device,
@@ -826,6 +842,9 @@
 	pxa_set_i2c_info(NULL);
 	platform_scoop_config = &tosa_pcmcia_config;
 
+	pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
 	clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index a13dbf3..a72e3ad 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -399,7 +399,7 @@
 	/* Switch mode */
 	if (mode & IR_SIRMODE)
 		trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;	/* Slow mode */
-	else if (mode & IR_FIRMODE) {
+	else if (mode & IR_FIRMODE)
 		trizeps_conxs_ircr |= ConXS_IRCR_MODE;	/* Fast mode */
 
 	/* Switch power */
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 2f60bf6..f854e73 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -1033,8 +1033,7 @@
 
 	fclk = pll / s3c2443_fclk_div(clkdiv0);
 	hclk = s3c2443_prediv_getrate(&clk_prediv);
-	hclk = hclk / s3c2443_get_hdiv(clkdiv0);
-	hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1);
+	hclk /= s3c2443_get_hdiv(clkdiv0);
  	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
 
 	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index d119388..ab5f7a2 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -400,9 +400,9 @@
 # ARMv6
 config CPU_V6
 	bool "Support ARM V6 processor"
-	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
+	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
 	default y if ARCH_MX3
-	default y if ARCH_MSM7X00A
+	default y if ARCH_MSM
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_PABRT_NOIFAR
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 33926c9..5786adf1 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -29,7 +29,7 @@
  *	Clean and invalidate the entire cache.
  */
 ENTRY(v4_flush_kern_cache_all)
-#ifdef CPU_CP15
+#ifdef CONFIG_CPU_CP15
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c7, 0		@ flush ID cache
 	mov	pc, lr
@@ -48,7 +48,7 @@
  *	- flags	- vma_area_struct flags describing address space
  */
 ENTRY(v4_flush_user_cache_range)
-#ifdef CPU_CP15
+#ifdef CONFIG_CPU_CP15
 	mov	ip, #0
 	mcreq	p15, 0, ip, c7, c7, 0		@ flush ID cache
 	mov	pc, lr
@@ -116,7 +116,7 @@
  *	- end	 - virtual end address
  */
 ENTRY(v4_dma_flush_range)
-#ifdef CPU_CP15
+#ifdef CONFIG_CPU_CP15
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c7, 0		@ flush ID cache
 #endif
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 34e4240..07f82db 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -180,8 +180,8 @@
 	mov	r10, #0x1f			@ domains 0, 1 = manager
 	mcr	p15, 0, r10, c3, c0, 0		@ load domain access register
 #endif
-	ldr	r5, =0x40e040e0
-	ldr	r6, =0xff0aa1a8
+	ldr	r5, =0xff0aa1a8
+	ldr	r6, =0x40e040e0
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
 	adr	r5, v7_crval
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c
index b8e854f..3fad68a 100644
--- a/arch/arm/plat-s3c24xx/pwm-clock.c
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@@ -315,7 +315,7 @@
 	if (parent == s3c24xx_pwmclk_tclk(id))
 		bits = S3C2410_TCFG1_MUX_TCLK << shift;
 	else if (parent == s3c24xx_pwmclk_tdiv(id))
-		bits = clk_pwm_tdiv_bits(to_tdiv(clk)) << shift;
+		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
 	else
 		return -EINVAL;
 
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
index feb770f..ec56b88 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c24xx/pwm.c
@@ -56,7 +56,7 @@
 		}					\
 	}
 
-#define DEFINE_TIMER(_tmr_no, _irq)			\
+#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
 	.name		= "s3c24xx-pwm",		\
 	.id		= _tmr_no,			\
 	.num_resources	= TIMER_RESOURCE_SIZE,		\
@@ -67,11 +67,11 @@
  */
 
 struct platform_device s3c_device_timer[] = {
-	[0] = { DEFINE_TIMER(0, IRQ_TIMER0) },
-	[1] = { DEFINE_TIMER(1, IRQ_TIMER1) },
-	[2] = { DEFINE_TIMER(2, IRQ_TIMER2) },
-	[3] = { DEFINE_TIMER(3, IRQ_TIMER3) },
-	[4] = { DEFINE_TIMER(4, IRQ_TIMER4) },
+	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
+	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
+	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
+	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
+	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
 };
 
 static inline int pwm_is_tdiv(struct pwm_device *pwm)
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 33a5b29..26eca87f 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -121,11 +121,19 @@
 config BOARD_ATNGW100
 	bool "ATNGW100 Network Gateway"
 	select CPU_AT32AP7000
+
+config BOARD_FAVR_32
+	bool "Favr-32 LCD-board"
+	select CPU_AT32AP7000
+
+config BOARD_MIMC200
+	bool "MIMC200 CPU board"
+	select CPU_AT32AP7000
 endchoice
 
-if BOARD_ATSTK1000
 source "arch/avr32/boards/atstk1000/Kconfig"
-endif
+source "arch/avr32/boards/atngw100/Kconfig"
+source "arch/avr32/boards/favr-32/Kconfig"
 
 choice
 	prompt "Boot loader type"
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
index c9e1f0b..b088e10 100644
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
@@ -33,6 +33,8 @@
 core-y					+= $(machdirs)
 core-$(CONFIG_BOARD_ATSTK1000)		+= arch/avr32/boards/atstk1000/
 core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/
+core-$(CONFIG_BOARD_FAVR_32)		+= arch/avr32/boards/favr-32/
+core-$(CONFIG_BOARD_MIMC200)		+= arch/avr32/boards/mimc200/
 core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
 core-y					+= arch/avr32/kernel/
 core-y					+= arch/avr32/mm/
diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
new file mode 100644
index 0000000..b3f9947
--- /dev/null
+++ b/arch/avr32/boards/atngw100/Kconfig
@@ -0,0 +1,35 @@
+# NGW100 customization
+
+if BOARD_ATNGW100
+
+config BOARD_ATNGW100_EVKLCD10X
+	bool "Add support for EVKLCD10X addon board"
+	help
+	  This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA)
+	  addon board for the NGW100. By enabling this the LCD controller and
+	  AC97 controller is added as platform devices.
+
+	  This choice disables the detect pin and the write-protect pin for the
+	  MCI platform device, since it conflicts with the LCD platform device.
+	  The MCI pins can be reenabled by editing the "add device function" but
+	  this may break the setup for other displays that use these pins.
+
+	  Choose 'Y' here if you have a EVKLCD100/101 connected to the NGW100.
+
+choice
+	prompt "LCD panel resolution on EVKLCD10X"
+	depends on BOARD_ATNGW100_EVKLCD10X
+	default BOARD_ATNGW100_EVKLCD10X_VGA
+
+config BOARD_ATNGW100_EVKLCD10X_QVGA
+	bool "QVGA (320x240)"
+
+config BOARD_ATNGW100_EVKLCD10X_VGA
+	bool "VGA (640x480)"
+
+config BOARD_ATNGW100_EVKLCD10X_POW_QVGA
+	bool "Powertip QVGA (320x240)"
+
+endchoice
+
+endif	# BOARD_ATNGW100
diff --git a/arch/avr32/boards/atngw100/Makefile b/arch/avr32/boards/atngw100/Makefile
index c740aa1..6376f53 100644
--- a/arch/avr32/boards/atngw100/Makefile
+++ b/arch/avr32/boards/atngw100/Makefile
@@ -1 +1,2 @@
-obj-y				+= setup.o flash.o
+obj-y					+= setup.o flash.o
+obj-$(CONFIG_BOARD_ATNGW100_EVKLCD10X)	+= evklcd10x.o
diff --git a/arch/avr32/boards/atngw100/evklcd10x.c b/arch/avr32/boards/atngw100/evklcd10x.c
new file mode 100644
index 0000000..8140b22
--- /dev/null
+++ b/arch/avr32/boards/atngw100/evklcd10x.c
@@ -0,0 +1,155 @@
+/*
+ * Board-specific setup code for the ATEVKLCD10X addon board to the ATNGW100
+ * Network Gateway
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/fb.h>
+#include <linux/platform_device.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/setup.h>
+
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+
+static struct ac97c_platform_data __initdata ac97c0_data = {
+	.dma_rx_periph_id	= 3,
+	.dma_tx_periph_id	= 4,
+	.dma_controller_id	= 0,
+	.reset_pin		= GPIO_PIN_PB(19),
+};
+
+#ifdef CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA
+static struct fb_videomode __initdata tcg057vglad_modes[] = {
+	{
+		.name		= "640x480 @ 60",
+		.refresh	= 60,
+		.xres		= 640,		.yres		= 480,
+		.pixclock	= KHZ2PICOS(25180),
+
+		.left_margin	= 64,		.right_margin	= 31,
+		.upper_margin	= 34,		.lower_margin	= 2,
+		.hsync_len	= 96,		.vsync_len	= 4,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
+	.manufacturer		= "KYO",
+	.monitor		= "TCG057VGLAD",
+	.modedb			= tcg057vglad_modes,
+	.modedb_len		= ARRAY_SIZE(tcg057vglad_modes),
+	.hfmin			= 19948,
+	.hfmax			= 31478,
+	.vfmin			= 50,
+	.vfmax			= 67,
+	.dclkmax		= 28330000,
+};
+
+static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+	.default_bpp		= 16,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.default_monspecs	= &atevklcd10x_default_monspecs,
+	.guard_time		= 2,
+};
+#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA
+static struct fb_videomode __initdata tcg057qvlad_modes[] = {
+	{
+		.name		= "320x240 @ 60",
+		.refresh	= 60,
+		.xres		= 320,		.yres		= 240,
+		.pixclock	= KHZ2PICOS(6300),
+
+		.left_margin	= 52,		.right_margin	= 28,
+		.upper_margin	= 7,		.lower_margin	= 2,
+		.hsync_len	= 96,		.vsync_len	= 4,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
+	.manufacturer		= "KYO",
+	.monitor		= "TCG057QVLAD",
+	.modedb			= tcg057qvlad_modes,
+	.modedb_len		= ARRAY_SIZE(tcg057qvlad_modes),
+	.hfmin			= 19948,
+	.hfmax			= 31478,
+	.vfmin			= 50,
+	.vfmax			= 67,
+	.dclkmax		= 7000000,
+};
+
+static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+	.default_bpp		= 16,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.default_monspecs	= &atevklcd10x_default_monspecs,
+	.guard_time		= 2,
+};
+#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA
+static struct fb_videomode __initdata ph320240t_modes[] = {
+	{
+		.name		= "320x240 @ 60",
+		.refresh	= 60,
+		.xres		= 320,		.yres		= 240,
+		.pixclock	= KHZ2PICOS(6300),
+
+		.left_margin	= 38,		.right_margin	= 20,
+		.upper_margin	= 15,		.lower_margin	= 5,
+		.hsync_len	= 30,		.vsync_len	= 3,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
+	.manufacturer		= "POW",
+	.monitor		= "PH320240T",
+	.modedb			= ph320240t_modes,
+	.modedb_len		= ARRAY_SIZE(ph320240t_modes),
+	.hfmin			= 14400,
+	.hfmax			= 21600,
+	.vfmin			= 50,
+	.vfmax			= 90,
+	.dclkmax		= 6400000,
+};
+
+static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+	.default_bpp		= 16,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.default_monspecs	= &atevklcd10x_default_monspecs,
+	.guard_time		= 2,
+};
+#endif
+
+static int __init atevklcd10x_init(void)
+{
+	at32_add_device_ac97c(0, &ac97c0_data);
+
+	at32_add_device_lcdc(0, &atevklcd10x_lcdc_data,
+			fbmem_start, fbmem_size, 1);
+	return 0;
+}
+postcore_initcall(atevklcd10x_init);
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 6c54580..32fb9ba 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -56,8 +56,13 @@
 static struct mci_platform_data __initdata mci0_data = {
 	.slot[0] = {
 		.bus_width	= 4,
+#ifndef CONFIG_BOARD_ATNGW100_EVKLCD10X
 		.detect_pin	= GPIO_PIN_PC(25),
 		.wp_pin		= GPIO_PIN_PE(0),
+#else
+		.detect_pin	= GPIO_PIN_NONE,
+		.wp_pin		= GPIO_PIN_NONE,
+#endif
 	},
 };
 
@@ -172,8 +177,6 @@
 	 * reserve any pins for it.
 	 */
 
-	at32_add_system_devices();
-
 	at32_add_device_usart(0);
 
 	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 29e5b51..5c5cdf3 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -305,8 +305,6 @@
 	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
 	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
 
-	at32_add_system_devices();
-
 #ifdef CONFIG_BOARD_ATSTK1006
 	smc_set_timing(&nand_config, &nand_timing);
 	smc_set_configuration(3, &nand_config);
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index be089d7f..134b566 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -149,8 +149,6 @@
 	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
 	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
 
-	at32_add_system_devices();
-
 #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_usart(1);
 #else
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index 248ef23..cb32eb8 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -132,8 +132,6 @@
 
 static int __init atstk1004_init(void)
 {
-	at32_add_system_devices();
-
 #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_usart(1);
 #else
diff --git a/arch/avr32/boards/favr-32/Kconfig b/arch/avr32/boards/favr-32/Kconfig
new file mode 100644
index 0000000..2c83d1d
--- /dev/null
+++ b/arch/avr32/boards/favr-32/Kconfig
@@ -0,0 +1,22 @@
+# Favr-32 customization
+
+if BOARD_FAVR_32
+
+config BOARD_FAVR32_ABDAC_RATE
+	int "DAC target rate"
+	default 44100
+	range 32000 50000
+	help
+	  Specify the target rate the internal DAC should try to match. This
+	  will use PLL1 to generate a frequency as close as possible to this
+	  rate.
+
+	  Must be within the range 32000 to 50000, which should be suitable to
+	  generate most other frequencies in power of 2 steps.
+
+	  Ex:
+		48000 will also suit 24000 and 12000
+		44100 will also suit 22050 and 11025
+		32000 will also suit 16000 and 8000
+
+endif # BOARD_FAVR_32
diff --git a/arch/avr32/boards/favr-32/Makefile b/arch/avr32/boards/favr-32/Makefile
new file mode 100644
index 0000000..234f215
--- /dev/null
+++ b/arch/avr32/boards/favr-32/Makefile
@@ -0,0 +1 @@
+obj-y	+= setup.o flash.o
diff --git a/arch/avr32/boards/favr-32/flash.c b/arch/avr32/boards/favr-32/flash.c
new file mode 100644
index 0000000..5f139b7c
--- /dev/null
+++ b/arch/avr32/boards/favr-32/flash.c
@@ -0,0 +1,98 @@
+/*
+ * Favr-32 board-specific flash initialization
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/arch/smc.h>
+
+static struct smc_timing flash_timing __initdata = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 40,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 10,
+
+	.ncs_read_pulse		= 80,
+	.nrd_pulse		= 40,
+	.ncs_write_pulse	= 65,
+	.nwe_pulse		= 55,
+
+	.read_cycle		= 120,
+	.write_cycle		= 120,
+};
+
+static struct smc_config flash_config __initdata = {
+	.bus_width		= 2,
+	.nrd_controlled		= 1,
+	.nwe_controlled		= 1,
+	.byte_write		= 1,
+};
+
+static struct mtd_partition flash_parts[] = {
+	{
+		.name           = "u-boot",
+		.offset         = 0x00000000,
+		.size           = 0x00020000,           /* 128 KiB */
+		.mask_flags     = MTD_WRITEABLE,
+	},
+	{
+		.name           = "root",
+		.offset         = 0x00020000,
+		.size           = 0x007d0000,
+	},
+	{
+		.name           = "env",
+		.offset         = 0x007f0000,
+		.size           = 0x00010000,
+		.mask_flags     = MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(flash_parts),
+	.parts		= flash_parts,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x00000000,
+	.end		= 0x007fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+/* This needs to be called after the SMC has been initialized */
+static int __init favr32_flash_init(void)
+{
+	int ret;
+
+	smc_set_timing(&flash_config, &flash_timing);
+	ret = smc_set_configuration(0, &flash_config);
+	if (ret < 0) {
+		printk(KERN_ERR "Favr-32: failed to set NOR flash timing\n");
+		return ret;
+	}
+
+	platform_device_register(&flash_device);
+
+	return 0;
+}
+device_initcall(favr32_flash_init);
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
new file mode 100644
index 0000000..7538f3d
--- /dev/null
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -0,0 +1,352 @@
+/*
+ * Favr-32 board-specific setup code.
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/etherdevice.h>
+#include <linux/bootmem.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/atmel-pwm-bl.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/setup.h>
+
+#include <asm/arch/at32ap700x.h>
+#include <asm/arch/init.h>
+#include <asm/arch/board.h>
+#include <asm/arch/portmux.h>
+
+/* Oscillator frequencies. These are board-specific */
+unsigned long at32_board_osc_rates[3] = {
+	[0] = 32768,	/* 32.768 kHz on RTC osc */
+	[1] = 20000000,	/* 20 MHz on osc0 */
+	[2] = 12000000,	/* 12 MHz on osc1 */
+};
+
+/* Initialized by bootloader-specific startup code. */
+struct tag *bootloader_tags __initdata;
+
+struct eth_addr {
+	u8 addr[6];
+};
+static struct eth_addr __initdata hw_addr[1];
+static struct eth_platform_data __initdata eth_data[1] = {
+	{
+		.phy_mask	= ~(1U << 1),
+	},
+};
+
+static int ads7843_get_pendown_state(void)
+{
+	return !gpio_get_value(GPIO_PIN_PB(3));
+}
+
+static struct ads7846_platform_data ads7843_data = {
+	.model			= 7843,
+	.get_pendown_state	= ads7843_get_pendown_state,
+	.pressure_max		= 255,
+	/*
+	 * Values below are for debounce filtering, these can be experimented
+	 * with further.
+	 */
+	.debounce_max		= 20,
+	.debounce_rep		= 4,
+	.debounce_tol		= 5,
+};
+
+static struct spi_board_info __initdata spi1_board_info[] = {
+	{
+		/* ADS7843 touch controller */
+		.modalias	= "ads7846",
+		.max_speed_hz	= 2000000,
+		.chip_select	= 0,
+		.bus_num	= 1,
+		.platform_data	= &ads7843_data,
+	},
+};
+
+static struct fb_videomode __initdata lb104v03_modes[] = {
+	{
+		.name		= "640x480 @ 50",
+		.refresh	= 50,
+		.xres		= 640,		.yres		= 480,
+		.pixclock	= KHZ2PICOS(25100),
+
+		.left_margin	= 90,		.right_margin	= 70,
+		.upper_margin	= 30,		.lower_margin	= 15,
+		.hsync_len	= 12,		.vsync_len	= 2,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata favr32_default_monspecs = {
+	.manufacturer		= "LG",
+	.monitor		= "LB104V03",
+	.modedb			= lb104v03_modes,
+	.modedb_len		= ARRAY_SIZE(lb104v03_modes),
+	.hfmin			= 27273,
+	.hfmax			= 31111,
+	.vfmin			= 45,
+	.vfmax			= 60,
+	.dclkmax		= 28000000,
+};
+
+struct atmel_lcdfb_info __initdata favr32_lcdc_data = {
+	.default_bpp		= 16,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.default_monspecs	= &favr32_default_monspecs,
+	.guard_time		= 2,
+};
+
+static struct gpio_led favr32_leds[] = {
+	{
+		.name		 = "green",
+		.gpio		 = GPIO_PIN_PE(19),
+		.default_trigger = "heartbeat",
+		.active_low	 = 1,
+	},
+	{
+		.name		 = "red",
+		.gpio		 = GPIO_PIN_PE(20),
+		.active_low	 = 1,
+	},
+};
+
+static struct gpio_led_platform_data favr32_led_data = {
+	.num_leds	= ARRAY_SIZE(favr32_leds),
+	.leds		= favr32_leds,
+};
+
+static struct platform_device favr32_led_dev = {
+	.name		= "leds-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &favr32_led_data,
+	},
+};
+
+/*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+ * ethernet address. But we need to keep it around for a while until
+ * we can be reasonably sure the boot loader does this.
+ *
+ * The phy_id is ignored as the driver will probe for it.
+ */
+static int __init parse_tag_ethernet(struct tag *tag)
+{
+	int i;
+
+	i = tag->u.ethernet.mac_index;
+	if (i < ARRAY_SIZE(hw_addr))
+		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
+		       sizeof(hw_addr[i].addr));
+
+	return 0;
+}
+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
+
+static void __init set_hw_addr(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	const u8 *addr;
+	void __iomem *regs;
+	struct clk *pclk;
+
+	if (!res)
+		return;
+	if (pdev->id >= ARRAY_SIZE(hw_addr))
+		return;
+
+	addr = hw_addr[pdev->id].addr;
+	if (!is_valid_ether_addr(addr))
+		return;
+
+	/*
+	 * Since this is board-specific code, we'll cheat and use the
+	 * physical address directly as we happen to know that it's
+	 * the same as the virtual address.
+	 */
+	regs = (void __iomem __force *)res->start;
+	pclk = clk_get(&pdev->dev, "pclk");
+	if (!pclk)
+		return;
+
+	clk_enable(pclk);
+	__raw_writel((addr[3] << 24) | (addr[2] << 16)
+		     | (addr[1] << 8) | addr[0], regs + 0x98);
+	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
+	clk_disable(pclk);
+	clk_put(pclk);
+}
+
+void __init favr32_setup_leds(void)
+{
+	unsigned i;
+
+	for (i = 0; i < ARRAY_SIZE(favr32_leds); i++)
+		at32_select_gpio(favr32_leds[i].gpio, AT32_GPIOF_OUTPUT);
+
+	platform_device_register(&favr32_led_dev);
+}
+
+static struct atmel_pwm_bl_platform_data atmel_pwm_bl_pdata = {
+	.pwm_channel		= 2,
+	.pwm_frequency		= 200000,
+	.pwm_compare_max	= 345,
+	.pwm_duty_max		= 345,
+	.pwm_duty_min		= 90,
+	.pwm_active_low		= 1,
+	.gpio_on		= GPIO_PIN_PA(28),
+	.on_active_low		= 0,
+};
+
+static struct platform_device atmel_pwm_bl_dev = {
+	.name		= "atmel-pwm-bl",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &atmel_pwm_bl_pdata,
+	},
+};
+
+static void __init favr32_setup_atmel_pwm_bl(void)
+{
+	platform_device_register(&atmel_pwm_bl_dev);
+	at32_select_gpio(atmel_pwm_bl_pdata.gpio_on, 0);
+}
+
+void __init setup_board(void)
+{
+	at32_map_usart(3, 0);	/* USART 3 => /dev/ttyS0 */
+	at32_setup_serial_console(0);
+}
+
+static int __init set_abdac_rate(struct platform_device *pdev)
+{
+	int retval;
+	struct clk *osc1;
+	struct clk *pll1;
+	struct clk *abdac;
+
+	if (pdev == NULL)
+		return -ENXIO;
+
+	osc1 = clk_get(NULL, "osc1");
+	if (IS_ERR(osc1)) {
+		retval = PTR_ERR(osc1);
+		goto out;
+	}
+
+	pll1 = clk_get(NULL, "pll1");
+	if (IS_ERR(pll1)) {
+		retval = PTR_ERR(pll1);
+		goto out_osc1;
+	}
+
+	abdac = clk_get(&pdev->dev, "sample_clk");
+	if (IS_ERR(abdac)) {
+		retval = PTR_ERR(abdac);
+		goto out_pll1;
+	}
+
+	retval = clk_set_parent(pll1, osc1);
+	if (retval != 0)
+		goto out_abdac;
+
+	/*
+	 * Rate is 32000 to 50000 and ABDAC oversamples 256x. Multiply, in
+	 * power of 2, to a value above 80 MHz. Power of 2 so it is possible
+	 * for the generic clock to divide it down again and 80 MHz is the
+	 * lowest frequency for the PLL.
+	 */
+	retval = clk_round_rate(pll1,
+			CONFIG_BOARD_FAVR32_ABDAC_RATE * 256 * 16);
+	if (retval < 0)
+		goto out_abdac;
+
+	retval = clk_set_rate(pll1, retval);
+	if (retval != 0)
+		goto out_abdac;
+
+	retval = clk_set_parent(abdac, pll1);
+	if (retval != 0)
+		goto out_abdac;
+
+out_abdac:
+	clk_put(abdac);
+out_pll1:
+	clk_put(pll1);
+out_osc1:
+	clk_put(osc1);
+out:
+	return retval;
+}
+
+static int __init favr32_init(void)
+{
+	/*
+	 * Favr-32 uses 32-bit SDRAM interface. Reserve the SDRAM-specific
+	 * pins so that nobody messes with them.
+	 */
+	at32_reserve_pin(GPIO_PIN_PE(0));	/* DATA[16]	*/
+	at32_reserve_pin(GPIO_PIN_PE(1));	/* DATA[17]	*/
+	at32_reserve_pin(GPIO_PIN_PE(2));	/* DATA[18]	*/
+	at32_reserve_pin(GPIO_PIN_PE(3));	/* DATA[19]	*/
+	at32_reserve_pin(GPIO_PIN_PE(4));	/* DATA[20]	*/
+	at32_reserve_pin(GPIO_PIN_PE(5));	/* DATA[21]	*/
+	at32_reserve_pin(GPIO_PIN_PE(6));	/* DATA[22]	*/
+	at32_reserve_pin(GPIO_PIN_PE(7));	/* DATA[23]	*/
+	at32_reserve_pin(GPIO_PIN_PE(8));	/* DATA[24]	*/
+	at32_reserve_pin(GPIO_PIN_PE(9));	/* DATA[25]	*/
+	at32_reserve_pin(GPIO_PIN_PE(10));	/* DATA[26]	*/
+	at32_reserve_pin(GPIO_PIN_PE(11));	/* DATA[27]	*/
+	at32_reserve_pin(GPIO_PIN_PE(12));	/* DATA[28]	*/
+	at32_reserve_pin(GPIO_PIN_PE(13));	/* DATA[29]	*/
+	at32_reserve_pin(GPIO_PIN_PE(14));	/* DATA[30]	*/
+	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
+	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
+
+	at32_select_gpio(GPIO_PIN_PB(3), 0);	/* IRQ from ADS7843 */
+
+	at32_add_system_devices();
+
+	at32_add_device_usart(0);
+
+	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+
+	spi1_board_info[0].irq = gpio_to_irq(GPIO_PIN_PB(3));
+
+	set_abdac_rate(at32_add_device_abdac(0));
+
+	at32_add_device_pwm(1 << atmel_pwm_bl_pdata.pwm_channel);
+	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+	at32_add_device_mci(0, NULL);
+	at32_add_device_usba(0, NULL);
+	at32_add_device_lcdc(0, &favr32_lcdc_data, fbmem_start, fbmem_size, 0);
+
+	favr32_setup_leds();
+
+	favr32_setup_atmel_pwm_bl();
+
+	return 0;
+}
+postcore_initcall(favr32_init);
diff --git a/arch/avr32/boards/mimc200/Makefile b/arch/avr32/boards/mimc200/Makefile
new file mode 100644
index 0000000..79c076e
--- /dev/null
+++ b/arch/avr32/boards/mimc200/Makefile
@@ -0,0 +1 @@
+obj-y				+= setup.o flash.o fram.o
diff --git a/arch/avr32/boards/mimc200/flash.c b/arch/avr32/boards/mimc200/flash.c
new file mode 100644
index 0000000..d83d650
--- /dev/null
+++ b/arch/avr32/boards/mimc200/flash.c
@@ -0,0 +1,143 @@
+/*
+ * MIMC200 board-specific flash initialization
+ *
+ * Copyright (C) 2008 Mercury IMC Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <mach/smc.h>
+
+static struct smc_timing flash_timing __initdata = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 15,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 0,
+
+	.ncs_read_pulse		= 115,
+	.nrd_pulse		= 110,
+	.ncs_write_pulse	= 60,
+	.nwe_pulse		= 60,
+
+	.read_cycle		= 115,
+	.write_cycle		= 100,
+};
+
+static struct smc_config flash_config __initdata = {
+	.bus_width		= 2,
+	.nrd_controlled		= 1,
+	.nwe_controlled		= 1,
+	.byte_write		= 1,
+};
+
+/* system flash definition */
+
+static struct mtd_partition flash_parts_system[] = {
+	{
+		.name           = "u-boot",
+		.offset         = 0x00000000,
+		.size           = 0x00020000,           /* 128 KiB */
+		.mask_flags     = MTD_WRITEABLE,
+	},
+	{
+		.name           = "root",
+		.offset         = 0x00020000,
+		.size           = 0x007c0000,
+	},
+	{
+		.name		= "splash",
+		.offset		= 0x007e0000,
+		.size		= 0x00010000,		/* 64KiB */
+	},
+	{
+		.name           = "env",
+		.offset         = 0x007f0000,
+		.size           = 0x00010000,
+		.mask_flags     = MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data flash_system = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(flash_parts_system),
+	.parts		= flash_parts_system,
+};
+
+static struct resource flash_resource_system = {
+	.start		= 0x00000000,
+	.end		= 0x007fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device_system = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &flash_resource_system,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_system,
+	},
+};
+
+/* data flash definition */
+
+static struct mtd_partition flash_parts_data[] = {
+	{
+		.name		= "data",
+		.offset		= 0x00000000,
+		.size		= 0x00800000,
+	},
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(flash_parts_data),
+	.parts		= flash_parts_data,
+};
+
+static struct resource flash_resource_data = {
+	.start		= 0x08000000,
+	.end		= 0x087fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device_data = {
+	.name		= "physmap-flash",
+	.id		= 1,
+	.resource	= &flash_resource_data,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+/* This needs to be called after the SMC has been initialized */
+static int __init mimc200_flash_init(void)
+{
+	int ret;
+
+	smc_set_timing(&flash_config, &flash_timing);
+	ret = smc_set_configuration(0, &flash_config);
+	if (ret < 0) {
+		printk(KERN_ERR "mimc200: failed to set 'System' NOR flash timing\n");
+		return ret;
+	}
+	ret = smc_set_configuration(1, &flash_config);
+	if (ret < 0) {
+		printk(KERN_ERR "mimc200: failed to set 'Data' NOR flash timing\n");
+		return ret;
+	}
+
+	platform_device_register(&flash_device_system);
+	platform_device_register(&flash_device_data);
+
+	return 0;
+}
+device_initcall(mimc200_flash_init);
diff --git a/arch/avr32/boards/mimc200/fram.c b/arch/avr32/boards/mimc200/fram.c
new file mode 100644
index 0000000..54fbd95
--- /dev/null
+++ b/arch/avr32/boards/mimc200/fram.c
@@ -0,0 +1,80 @@
+/*
+ * FRAM driver for MIMC200 board
+ *
+ * Copyright 2008 Mark Jackson <mpfj@mimc.co.uk>
+ *
+ * This module adds *very* simply support for the system's FRAM device.
+ * At the moment, this is hard-coded to the MIMC200 platform, and only
+ * supports mmap().
+ */
+
+#define FRAM_VERSION	"1.0"
+
+#include <linux/miscdevice.h>
+#include <linux/proc_fs.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+
+#define FRAM_BASE	0xac000000
+#define FRAM_SIZE	0x20000
+
+/*
+ * The are the file operation function for user access to /dev/fram
+ */
+
+static int fram_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	int ret;
+
+	ret = remap_pfn_range(vma,
+		vma->vm_start,
+		virt_to_phys((void *)((unsigned long)FRAM_BASE)) >> PAGE_SHIFT,
+		vma->vm_end-vma->vm_start,
+		PAGE_SHARED);
+
+	if (ret != 0)
+		return -EAGAIN;
+
+	return 0;
+}
+
+static const struct file_operations fram_fops = {
+	.owner			= THIS_MODULE,
+	.mmap			= fram_mmap,
+};
+
+#define FRAM_MINOR	0
+
+static struct miscdevice fram_dev = {
+	FRAM_MINOR,
+	"fram",
+	&fram_fops
+};
+
+static int __init
+fram_init(void)
+{
+	int ret;
+
+	ret = misc_register(&fram_dev);
+	if (ret) {
+		printk(KERN_ERR "fram: can't misc_register on minor=%d\n",
+		    FRAM_MINOR);
+		return ret;
+	}
+	printk(KERN_INFO "FRAM memory driver v" FRAM_VERSION "\n");
+	return 0;
+}
+
+static void __exit
+fram_cleanup_module(void)
+{
+	misc_deregister(&fram_dev);
+}
+
+module_init(fram_init);
+module_exit(fram_cleanup_module);
+
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS_MISCDEV(FRAM_MINOR);
diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
new file mode 100644
index 0000000..397cbb8
--- /dev/null
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -0,0 +1,237 @@
+/*
+ * Board-specific setup code for the MIMC200
+ *
+ * Copyright (C) 2008 Mercury IMC Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+extern struct atmel_lcdfb_info mimc200_lcdc_data;
+
+#include <linux/clk.h>
+#include <linux/etherdevice.h>
+#include <linux/i2c-gpio.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <video/atmel_lcdc.h>
+#include <linux/fb.h>
+
+#include <asm/atmel-mci.h>
+#include <linux/io.h>
+#include <asm/setup.h>
+
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
+
+/* Oscillator frequencies. These are board-specific */
+unsigned long at32_board_osc_rates[3] = {
+	[0] = 32768,	/* 32.768 kHz on RTC osc */
+	[1] = 10000000,	/* 10 MHz on osc0 */
+	[2] = 12000000,	/* 12 MHz on osc1 */
+};
+
+/* Initialized by bootloader-specific startup code. */
+struct tag *bootloader_tags __initdata;
+
+static struct fb_videomode __initdata tx14d14_modes[] = {
+	{
+		.name		= "640x480 @ 60",
+		.refresh	= 60,
+		.xres		= 640,		.yres		= 480,
+		.pixclock	= KHZ2PICOS(11666),
+
+		.left_margin	= 80,		.right_margin	= 1,
+		.upper_margin	= 13,		.lower_margin	= 2,
+		.hsync_len	= 64,		.vsync_len	= 1,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata mimc200_default_monspecs = {
+	.manufacturer		= "HIT",
+	.monitor		= "TX14D14VM1BAB",
+	.modedb			= tx14d14_modes,
+	.modedb_len		= ARRAY_SIZE(tx14d14_modes),
+	.hfmin			= 14820,
+	.hfmax			= 22230,
+	.vfmin			= 60,
+	.vfmax			= 73.3,
+	.dclkmax		= 25200000,
+};
+
+struct atmel_lcdfb_info __initdata mimc200_lcdc_data = {
+	.default_bpp		= 16,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_INVCLK
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.default_monspecs	= &mimc200_default_monspecs,
+	.guard_time		= 2,
+};
+
+struct eth_addr {
+	u8 addr[6];
+};
+static struct eth_addr __initdata hw_addr[2];
+static struct eth_platform_data __initdata eth_data[2];
+
+static struct spi_eeprom eeprom_25lc010 = {
+		.name = "25lc010",
+		.byte_len = 128,
+		.page_size = 16,
+		.flags = EE_ADDR1,
+};
+
+static struct spi_board_info spi0_board_info[] __initdata = {
+	{
+		.modalias	= "rtc-ds1390",
+		.max_speed_hz	= 4000000,
+		.chip_select	= 2,
+	},
+	{
+		.modalias	= "at25",
+		.max_speed_hz	= 1000000,
+		.chip_select	= 1,
+		.mode		= SPI_MODE_3,
+		.platform_data	= &eeprom_25lc010,
+	},
+};
+
+static struct mci_platform_data __initdata mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= GPIO_PIN_PA(26),
+		.wp_pin		= GPIO_PIN_PA(27),
+	},
+};
+
+/*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+ * ethernet address. But we need to keep it around for a while until
+ * we can be reasonably sure the boot loader does this.
+ *
+ * The phy_id is ignored as the driver will probe for it.
+ */
+static int __init parse_tag_ethernet(struct tag *tag)
+{
+	int i;
+
+	i = tag->u.ethernet.mac_index;
+	if (i < ARRAY_SIZE(hw_addr))
+		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
+		       sizeof(hw_addr[i].addr));
+
+	return 0;
+}
+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
+
+static void __init set_hw_addr(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	const u8 *addr;
+	void __iomem *regs;
+	struct clk *pclk;
+
+	if (!res)
+		return;
+	if (pdev->id >= ARRAY_SIZE(hw_addr))
+		return;
+
+	addr = hw_addr[pdev->id].addr;
+	if (!is_valid_ether_addr(addr))
+		return;
+
+	/*
+	 * Since this is board-specific code, we'll cheat and use the
+	 * physical address directly as we happen to know that it's
+	 * the same as the virtual address.
+	 */
+	regs = (void __iomem __force *)res->start;
+	pclk = clk_get(&pdev->dev, "pclk");
+	if (!pclk)
+		return;
+
+	clk_enable(pclk);
+	__raw_writel((addr[3] << 24) | (addr[2] << 16)
+		     | (addr[1] << 8) | addr[0], regs + 0x98);
+	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
+	clk_disable(pclk);
+	clk_put(pclk);
+}
+
+void __init setup_board(void)
+{
+	at32_map_usart(0, 0);	/* USART 0: /dev/ttyS0 (TTL --> Altera) */
+	at32_map_usart(1, 1);	/* USART 1: /dev/ttyS1 (RS232) */
+	at32_map_usart(2, 2);	/* USART 2: /dev/ttyS2 (RS485) */
+	at32_map_usart(3, 3);	/* USART 3: /dev/ttyS3 (RS422 Multidrop) */
+}
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+	.sda_pin		= GPIO_PIN_PA(6),
+	.scl_pin		= GPIO_PIN_PA(7),
+	.sda_is_open_drain	= 1,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,	/* close to 100 kHz */
+};
+
+static struct platform_device i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+	.platform_data	= &i2c_gpio_data,
+	},
+};
+
+static struct i2c_board_info __initdata i2c_info[] = {
+};
+
+static int __init mimc200_init(void)
+{
+	/*
+	 * MIMC200 uses 16-bit SDRAM interface, so we don't need to
+	 * reserve any pins for it.
+	 */
+
+	at32_add_system_devices();
+
+	at32_add_device_usart(0);
+	at32_add_device_usart(1);
+	at32_add_device_usart(2);
+	at32_add_device_usart(3);
+
+	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+
+	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+	at32_add_device_mci(0, &mci0_data);
+	at32_add_device_usba(0, NULL);
+
+	at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP);
+	at32_select_gpio(i2c_gpio_data.sda_pin,
+		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+	at32_select_gpio(i2c_gpio_data.scl_pin,
+		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+	platform_device_register(&i2c_gpio_device);
+	i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
+
+	at32_add_device_lcdc(0, &mimc200_lcdc_data,
+			     fbmem_start, fbmem_size, 1);
+
+	return 0;
+}
+postcore_initcall(mimc200_init);
diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig
new file mode 100644
index 0000000..b0572d21
--- /dev/null
+++ b/arch/avr32/configs/atngw100_evklcd100_defconfig
@@ -0,0 +1,1264 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25.6
+# Wed Jun 18 16:06:32 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+# CONFIG_BOARD_ATSTK1000 is not set
+CONFIG_BOARD_ATNGW100=y
+CONFIG_BOARD_ATNGW100_EVKLCD10X=y
+CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA=y
+# CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA is not set
+# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set
+CONFIG_BOARD_ATNGW100_I2C_GPIO=y
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_GPIO_DEV=y
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
+CONFIG_DW_DMAC=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_XFRM_TUNNEL=y
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=y
+CONFIG_INET6_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x80000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_ATMELTWI=m
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# AVR32 devices
+#
+CONFIG_SND_ATMEL_AC97=m
+
+#
+# SPI devices
+#
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=y
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig
new file mode 100644
index 0000000..c5b898d
--- /dev/null
+++ b/arch/avr32/configs/atngw100_evklcd101_defconfig
@@ -0,0 +1,1264 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25.6
+# Wed Jun 18 16:09:32 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+# CONFIG_BOARD_ATSTK1000 is not set
+CONFIG_BOARD_ATNGW100=y
+CONFIG_BOARD_ATNGW100_EVKLCD10X=y
+# CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA is not set
+CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA=y
+# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set
+CONFIG_BOARD_ATNGW100_I2C_GPIO=y
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_GPIO_DEV=y
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
+CONFIG_DW_DMAC=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_XFRM_TUNNEL=y
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=y
+CONFIG_INET6_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x80000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_ATMELTWI=m
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# AVR32 devices
+#
+CONFIG_SND_ATMEL_AC97=m
+
+#
+# SPI devices
+#
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=y
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig
new file mode 100644
index 0000000..e2bd998
--- /dev/null
+++ b/arch/avr32/configs/favr-32_defconfig
@@ -0,0 +1,1235 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc8
+# Tue Oct 14 13:20:41 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+# CONFIG_BOARD_ATSTK1000 is not set
+# CONFIG_BOARD_ATNGW100 is not set
+CONFIG_BOARD_FAVR_32=y
+# CONFIG_BOARD_MIMC200 is not set
+CONFIG_BOARD_FAVR32_ABDAC_RATE=44100
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=m
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_GPIO=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_ATMEL_LCDC is not set
+CONFIG_BACKLIGHT_ATMEL_PWM=m
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=m
+# CONFIG_SND is not set
+CONFIG_SOUND_PRIME=m
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_ATMELMCI_DMA=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_ATMEL_PWM=m
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig
new file mode 100644
index 0000000..981e4f8
--- /dev/null
+++ b/arch/avr32/configs/mimc200_defconfig
@@ -0,0 +1,1109 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc8
+# Mon Oct 13 15:46:53 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+# CONFIG_BOARD_ATSTK1000 is not set
+# CONFIG_BOARD_ATNGW100 is not set
+CONFIG_BOARD_MIMC200=y
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_XFRM_TUNNEL=y
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=y
+CONFIG_INET6_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x80000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_AT24=y
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS28CM00 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=y
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+CONFIG_MMC_TEST=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_ATMELMCI_DMA is not set
+CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+CONFIG_RTC_DRV_DS1390=y
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT32AP700X is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 813b684..0c6e02f 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -813,7 +813,7 @@
 DEFINE_DEV(pio, 4);
 DEV_CLK(mck, pio4, pba, 14);
 
-void __init at32_add_system_devices(void)
+static int __init system_device_init(void)
 {
 	platform_device_register(&at32_pm0_device);
 	platform_device_register(&at32_intc0_device);
@@ -832,7 +832,10 @@
 	platform_device_register(&pio2_device);
 	platform_device_register(&pio3_device);
 	platform_device_register(&pio4_device);
+
+	return 0;
 }
+core_initcall(system_device_init);
 
 /* --------------------------------------------------------------------
  *  PSIF
@@ -1091,7 +1094,9 @@
 			pin_mask |= (1 << 11);	/* RXD2 */
 			pin_mask |= (1 << 12);	/* RXD3 */
 			pin_mask |= (1 << 14);	/* RXCK */
+#ifndef CONFIG_BOARD_MIMC200
 			pin_mask |= (1 << 18);	/* SPD  */
+#endif
 		}
 
 		select_peripheral(PIOC, pin_mask, PERIPH_A, 0);
@@ -1112,8 +1117,10 @@
 		pin_mask |= (1 << 3);	/* MDC  */
 		pin_mask |= (1 << 2);	/* MDIO */
 
+#ifndef CONFIG_BOARD_MIMC200
 		if (!data->is_rmii)
 			pin_mask |= (1 << 15);	/* SPD  */
+#endif
 
 		select_peripheral(PIOD, pin_mask, PERIPH_B, 0);
 
@@ -1470,7 +1477,7 @@
 			pin_mask = ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL;
 
 		/* LCDC on port C */
-		portc_mask = (pin_mask & 0xfff80000) >> 19;
+		portc_mask = pin_mask & 0xfff80000;
 		select_peripheral(PIOC, portc_mask, PERIPH_A, 0);
 
 		/* LCDC on port D */
diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c
index d84efe4..024c586 100644
--- a/arch/avr32/mach-at32ap/cpufreq.c
+++ b/arch/avr32/mach-at32ap/cpufreq.c
@@ -40,6 +40,9 @@
 	return (unsigned int)((clk_get_rate(cpuclk) + 500) / 1000);
 }
 
+static unsigned int	ref_freq;
+static unsigned long	loops_per_jiffy_ref;
+
 static int at32_set_target(struct cpufreq_policy *policy,
 			  unsigned int target_freq,
 			  unsigned int relation)
@@ -61,8 +64,19 @@
 	freqs.cpu = 0;
 	freqs.flags = 0;
 
+	if (!ref_freq) {
+		ref_freq = freqs.old;
+		loops_per_jiffy_ref = boot_cpu_data.loops_per_jiffy;
+	}
+
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	if (freqs.old < freqs.new)
+		boot_cpu_data.loops_per_jiffy = cpufreq_scale(
+				loops_per_jiffy_ref, ref_freq, freqs.new);
 	clk_set_rate(cpuclk, freq);
+	if (freqs.new < freqs.old)
+		boot_cpu_data.loops_per_jiffy = cpufreq_scale(
+				loops_per_jiffy_ref, ref_freq, freqs.new);
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
 	pr_debug("cpufreq: set frequency %lu Hz\n", freq);
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index c48386d..aafaf7a 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -14,8 +14,14 @@
  */
 extern unsigned long at32_board_osc_rates[];
   
-/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
-void at32_add_system_devices(void);
+/*
+ * This used to add essential system devices, but this is now done
+ * automatically. Please don't use it in new board code.
+ */
+static inline void __deprecated at32_add_system_devices(void)
+{
+
+}
 
 #define ATMEL_MAX_UART	4
 extern struct platform_device *atmel_default_console_device;
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 07335e7..b17aeea 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -679,6 +679,8 @@
 
 source "drivers/usb/Kconfig"
 
+source "drivers/uwb/Kconfig"
+
 source "arch/cris/Kconfig.debug"
 
 source "security/Kconfig"
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index bd19954..28f06fd 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -216,6 +216,8 @@
 
 source "drivers/usb/Kconfig"
 
+source "drivers/uwb/Kconfig"
+
 endmenu
 
 source "fs/Kconfig"
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 912c57d..27eec714 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -23,6 +23,7 @@
 	select HAVE_KRETPROBES
 	select HAVE_DMA_ATTRS
 	select HAVE_KVM
+	select HAVE_ARCH_TRACEHOOK
 	default y
 	help
 	  The Itanium Processor Family is Intel's 64-bit successor to
@@ -110,6 +111,33 @@
 	bool
 	default y
 
+menuconfig PARAVIRT_GUEST
+	bool "Paravirtualized guest support"
+	help
+	  Say Y here to get to see options related to running Linux under
+	  various hypervisors.  This option alone does not add any kernel code.
+
+	  If you say N, all options in this submenu will be skipped and disabled.
+
+if PARAVIRT_GUEST
+
+config PARAVIRT
+	bool "Enable paravirtualization code"
+	depends on PARAVIRT_GUEST
+	default y
+	bool
+	default y
+	help
+	  This changes the kernel so it can modify itself when it is run
+	  under a hypervisor, potentially improving performance significantly
+	  over full virtualization.  However, when run without a hypervisor
+	  the kernel is theoretically slower and slightly larger.
+
+
+source "arch/ia64/xen/Kconfig"
+
+endif
+
 choice
 	prompt "System type"
 	default IA64_GENERIC
@@ -119,6 +147,7 @@
 	select NUMA
 	select ACPI_NUMA
 	select SWIOTLB
+	select PCI_MSI
 	help
 	  This selects the system type of your hardware.  A "generic" kernel
 	  will run on any supported IA-64 system.  However, if you configure
@@ -126,11 +155,13 @@
 
 	  generic		For any supported IA-64 system
 	  DIG-compliant		For DIG ("Developer's Interface Guide") compliant systems
+	  DIG+Intel+IOMMU	For DIG systems with Intel IOMMU
 	  HP-zx1/sx1000		For HP systems
 	  HP-zx1/sx1000+swiotlb	For HP systems with (broken) DMA-constrained devices.
 	  SGI-SN2		For SGI Altix systems
 	  SGI-UV		For SGI UV systems
 	  Ski-simulator		For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
+	  Xen-domU		For xen domU system
 
 	  If you don't know what to do, choose "generic".
 
@@ -138,6 +169,11 @@
 	bool "DIG-compliant"
 	select SWIOTLB
 
+config IA64_DIG_VTD
+	bool "DIG+Intel+IOMMU"
+	select DMAR
+	select PCI_MSI
+
 config IA64_HP_ZX1
 	bool "HP-zx1/sx1000"
 	help
@@ -181,6 +217,10 @@
 	bool "Ski-simulator"
 	select SWIOTLB
 
+config IA64_XEN_GUEST
+	bool "Xen guest"
+	depends on XEN
+
 endchoice
 
 choice
@@ -583,6 +623,16 @@
 
 source "drivers/pcmcia/Kconfig"
 
+config DMAR
+        bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
+        depends on IA64_GENERIC && ACPI && EXPERIMENTAL
+	help
+	  DMA remapping (DMAR) devices support enables independent address
+	  translations for Direct Memory Access (DMA) from devices.
+	  These DMA remapping devices are reported via ACPI tables
+	  and include PCI device scope covered by these DMA
+	  remapping devices.
+
 endmenu
 
 endif
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index 905d25b..58a7e46a 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -53,12 +53,15 @@
 core-y				+= arch/ia64/kernel/ arch/ia64/mm/
 core-$(CONFIG_IA32_SUPPORT)	+= arch/ia64/ia32/
 core-$(CONFIG_IA64_DIG) 	+= arch/ia64/dig/
+core-$(CONFIG_IA64_DIG_VTD) 	+= arch/ia64/dig/
 core-$(CONFIG_IA64_GENERIC) 	+= arch/ia64/dig/
 core-$(CONFIG_IA64_HP_ZX1)	+= arch/ia64/dig/
 core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/
+core-$(CONFIG_IA64_XEN_GUEST)	+= arch/ia64/dig/
 core-$(CONFIG_IA64_SGI_SN2)	+= arch/ia64/sn/
 core-$(CONFIG_IA64_SGI_UV)	+= arch/ia64/uv/
 core-$(CONFIG_KVM) 		+= arch/ia64/kvm/
+core-$(CONFIG_XEN)		+= arch/ia64/xen/
 
 drivers-$(CONFIG_PCI)		+= arch/ia64/pci/
 drivers-$(CONFIG_IA64_HP_SIM)	+= arch/ia64/hp/sim/
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 9f48397..e05f9e1 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -233,6 +233,8 @@
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
+# CONFIG_DMAR is not set
+
 #
 # Power management and ACPI
 #
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index 797acf9..c522edf 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -172,6 +172,8 @@
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
+# CONFIG_DMAR is not set
+
 #
 # Power management and ACPI
 #
diff --git a/arch/ia64/dig/Makefile b/arch/ia64/dig/Makefile
index 971cd78..5c02838 100644
--- a/arch/ia64/dig/Makefile
+++ b/arch/ia64/dig/Makefile
@@ -6,4 +6,9 @@
 #
 
 obj-y := setup.o
+ifeq ($(CONFIG_DMAR), y)
+obj-$(CONFIG_IA64_GENERIC) += machvec.o machvec_vtd.o dig_vtd_iommu.o
+else
 obj-$(CONFIG_IA64_GENERIC) += machvec.o
+endif
+obj-$(CONFIG_IA64_DIG_VTD) += dig_vtd_iommu.o
diff --git a/arch/ia64/dig/dig_vtd_iommu.c b/arch/ia64/dig/dig_vtd_iommu.c
new file mode 100644
index 0000000..1c8a079
--- /dev/null
+++ b/arch/ia64/dig/dig_vtd_iommu.c
@@ -0,0 +1,59 @@
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/intel-iommu.h>
+
+void *
+vtd_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		 gfp_t flags)
+{
+	return intel_alloc_coherent(dev, size, dma_handle, flags);
+}
+EXPORT_SYMBOL_GPL(vtd_alloc_coherent);
+
+void
+vtd_free_coherent(struct device *dev, size_t size, void *vaddr,
+		 dma_addr_t dma_handle)
+{
+	intel_free_coherent(dev, size, vaddr, dma_handle);
+}
+EXPORT_SYMBOL_GPL(vtd_free_coherent);
+
+dma_addr_t
+vtd_map_single_attrs(struct device *dev, void *addr, size_t size,
+		     int dir, struct dma_attrs *attrs)
+{
+	return intel_map_single(dev, (phys_addr_t)addr, size, dir);
+}
+EXPORT_SYMBOL_GPL(vtd_map_single_attrs);
+
+void
+vtd_unmap_single_attrs(struct device *dev, dma_addr_t iova, size_t size,
+		       int dir, struct dma_attrs *attrs)
+{
+	intel_unmap_single(dev, iova, size, dir);
+}
+EXPORT_SYMBOL_GPL(vtd_unmap_single_attrs);
+
+int
+vtd_map_sg_attrs(struct device *dev, struct scatterlist *sglist, int nents,
+		 int dir, struct dma_attrs *attrs)
+{
+	return intel_map_sg(dev, sglist, nents, dir);
+}
+EXPORT_SYMBOL_GPL(vtd_map_sg_attrs);
+
+void
+vtd_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist,
+		   int nents, int dir, struct dma_attrs *attrs)
+{
+	intel_unmap_sg(dev, sglist, nents, dir);
+}
+EXPORT_SYMBOL_GPL(vtd_unmap_sg_attrs);
+
+int
+vtd_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(vtd_dma_mapping_error);
diff --git a/arch/ia64/dig/machvec_vtd.c b/arch/ia64/dig/machvec_vtd.c
new file mode 100644
index 0000000..7cd3eb4
--- /dev/null
+++ b/arch/ia64/dig/machvec_vtd.c
@@ -0,0 +1,3 @@
+#define MACHVEC_PLATFORM_NAME		dig_vtd
+#define MACHVEC_PLATFORM_HEADER		<asm/machvec_dig_vtd.h>
+#include <asm/machvec_init.h>
diff --git a/arch/ia64/ia32/audit.c b/arch/ia64/ia32/audit.c
index 5e901c7..5c93ddd 100644
--- a/arch/ia64/ia32/audit.c
+++ b/arch/ia64/ia32/audit.c
@@ -1,4 +1,4 @@
-#include <asm-x86/unistd_32.h>
+#include "../../x86/include/asm/unistd_32.h"
 
 unsigned ia32_dir_class[] = {
 #include <asm-generic/audit_dir_write.h>
diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
index 53505bb..a8cf199 100644
--- a/arch/ia64/ia32/ia32_entry.S
+++ b/arch/ia64/ia32/ia32_entry.S
@@ -108,6 +108,11 @@
 	;;
 	st8 [r2]=r3				// initialize return code to -ENOSYS
 	br.call.sptk.few rp=syscall_trace_enter	// give parent a chance to catch syscall args
+	cmp.lt p6,p0=r8,r0			// check tracehook
+	adds r2=IA64_PT_REGS_R8_OFFSET+16,sp	// r2 = &pt_regs.r8
+	;;
+(p6)	st8.spill [r2]=r8			// store return value in slot for r8
+(p6)	br.spnt.few .ret4
 .ret2:	// Need to reload arguments (they may be changed by the tracing process)
 	adds r2=IA64_PT_REGS_R1_OFFSET+16,sp	// r2 = &pt_regs.r1
 	adds r3=IA64_PT_REGS_R13_OFFSET+16,sp	// r3 = &pt_regs.r13
@@ -199,10 +204,10 @@
 	data8 sys_setuid	/* 16-bit version */
 	data8 sys_getuid	/* 16-bit version */
 	data8 compat_sys_stime    /* 25 */
-	data8 sys32_ptrace
+	data8 compat_sys_ptrace
 	data8 sys32_alarm
 	data8 sys_ni_syscall
-	data8 sys32_pause
+	data8 sys_pause
 	data8 compat_sys_utime	  /* 30 */
 	data8 sys_ni_syscall	  /* old stty syscall holder */
 	data8 sys_ni_syscall	  /* old gtty syscall holder */
@@ -215,7 +220,7 @@
 	data8 sys_mkdir
 	data8 sys_rmdir		  /* 40 */
 	data8 sys_dup
-	data8 sys32_pipe
+	data8 sys_pipe
 	data8 compat_sys_times
 	data8 sys_ni_syscall	  /* old prof syscall holder */
 	data8 sys32_brk		  /* 45 */
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index f4430bb..5e92ae0 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -1098,21 +1098,6 @@
 	return ret;
 }
 
-asmlinkage long
-sys32_pipe (int __user *fd)
-{
-	int retval;
-	int fds[2];
-
-	retval = do_pipe_flags(fds, 0);
-	if (retval)
-		goto out;
-	if (copy_to_user(fd, fds, sizeof(fds)))
-		retval = -EFAULT;
-  out:
-	return retval;
-}
-
 asmlinkage unsigned long
 sys32_alarm (unsigned int seconds)
 {
@@ -1209,25 +1194,6 @@
 	return compat_sys_wait4(pid, stat_addr, options, NULL);
 }
 
-static unsigned int
-ia32_peek (struct task_struct *child, unsigned long addr, unsigned int *val)
-{
-	size_t copied;
-	unsigned int ret;
-
-	copied = access_process_vm(child, addr, val, sizeof(*val), 0);
-	return (copied != sizeof(ret)) ? -EIO : 0;
-}
-
-static unsigned int
-ia32_poke (struct task_struct *child, unsigned long addr, unsigned int val)
-{
-
-	if (access_process_vm(child, addr, &val, sizeof(val), 1) != sizeof(val))
-		return -EIO;
-	return 0;
-}
-
 /*
  *  The order in which registers are stored in the ptrace regs structure
  */
@@ -1525,49 +1491,15 @@
 	return 0;
 }
 
-asmlinkage long
-sys32_ptrace (int request, pid_t pid, unsigned int addr, unsigned int data)
+long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
+	compat_ulong_t caddr, compat_ulong_t cdata)
 {
-	struct task_struct *child;
-	unsigned int value, tmp;
+	unsigned long addr = caddr;
+	unsigned long data = cdata;
+	unsigned int tmp;
 	long i, ret;
 
-	lock_kernel();
-	if (request == PTRACE_TRACEME) {
-		ret = ptrace_traceme();
-		goto out;
-	}
-
-	child = ptrace_get_task_struct(pid);
-	if (IS_ERR(child)) {
-		ret = PTR_ERR(child);
-		goto out;
-	}
-
-	if (request == PTRACE_ATTACH) {
-		ret = sys_ptrace(request, pid, addr, data);
-		goto out_tsk;
-	}
-
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
-
 	switch (request) {
-	      case PTRACE_PEEKTEXT:
-	      case PTRACE_PEEKDATA:	/* read word at location addr */
-		ret = ia32_peek(child, addr, &value);
-		if (ret == 0)
-			ret = put_user(value, (unsigned int __user *) compat_ptr(data));
-		else
-			ret = -EIO;
-		goto out_tsk;
-
-	      case PTRACE_POKETEXT:
-	      case PTRACE_POKEDATA:	/* write the word at location addr */
-		ret = ia32_poke(child, addr, data);
-		goto out_tsk;
-
 	      case PTRACE_PEEKUSR:	/* read word at addr in USER area */
 		ret = -EIO;
 		if ((addr & 3) || addr > 17*sizeof(int))
@@ -1632,27 +1564,9 @@
 					    compat_ptr(data));
 		break;
 
-	      case PTRACE_GETEVENTMSG:   
-		ret = put_user(child->ptrace_message, (unsigned int __user *) compat_ptr(data));
-		break;
-
-	      case PTRACE_SYSCALL:	/* continue, stop after next syscall */
-	      case PTRACE_CONT:		/* restart after signal. */
-	      case PTRACE_KILL:
-	      case PTRACE_SINGLESTEP:	/* execute chile for one instruction */
-	      case PTRACE_DETACH:	/* detach a process */
-		ret = sys_ptrace(request, pid, addr, data);
-		break;
-
 	      default:
-		ret = ptrace_request(child, request, addr, data);
-		break;
-
+		return compat_ptrace_request(child, request, caddr, cdata);
 	}
-  out_tsk:
-	put_task_struct(child);
-  out:
-	unlock_kernel();
 	return ret;
 }
 
@@ -1704,14 +1618,6 @@
 }
 
 asmlinkage int
-sys32_pause (void)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	return -ERESTARTNOHAND;
-}
-
-asmlinkage int
 sys32_msync (unsigned int start, unsigned int len, int flags)
 {
 	unsigned int addr;
diff --git a/arch/ia64/include/asm/break.h b/arch/ia64/include/asm/break.h
index f034020..e90c40e 100644
--- a/arch/ia64/include/asm/break.h
+++ b/arch/ia64/include/asm/break.h
@@ -20,4 +20,13 @@
  */
 #define __IA64_BREAK_SYSCALL		0x100000
 
+/*
+ * Xen specific break numbers:
+ */
+#define __IA64_XEN_HYPERCALL		0x1000
+/* [__IA64_XEN_HYPERPRIVOP_START, __IA64_XEN_HYPERPRIVOP_MAX] is used
+   for xen hyperprivops */
+#define __IA64_XEN_HYPERPRIVOP_START	0x1
+#define __IA64_XEN_HYPERPRIVOP_MAX	0x1a
+
 #endif /* _ASM_IA64_BREAK_H */
diff --git a/arch/ia64/include/asm/cacheflush.h b/arch/ia64/include/asm/cacheflush.h
index afcfbda..c8ce271 100644
--- a/arch/ia64/include/asm/cacheflush.h
+++ b/arch/ia64/include/asm/cacheflush.h
@@ -34,6 +34,8 @@
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
 
 extern void flush_icache_range (unsigned long start, unsigned long end);
+extern void clflush_cache_range(void *addr, int size);
+
 
 #define flush_icache_user_range(vma, page, user_addr, len)					\
 do {												\
diff --git a/arch/ia64/include/asm/device.h b/arch/ia64/include/asm/device.h
index 3db6daf..41ab85d 100644
--- a/arch/ia64/include/asm/device.h
+++ b/arch/ia64/include/asm/device.h
@@ -10,6 +10,9 @@
 #ifdef CONFIG_ACPI
 	void	*acpi_handle;
 #endif
+#ifdef CONFIG_DMAR
+	void *iommu; /* hook for IOMMU specific extension */
+#endif
 };
 
 #endif /* _ASM_IA64_DEVICE_H */
diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
index 06ff1ba..bbab7e2 100644
--- a/arch/ia64/include/asm/dma-mapping.h
+++ b/arch/ia64/include/asm/dma-mapping.h
@@ -7,6 +7,49 @@
  */
 #include <asm/machvec.h>
 #include <linux/scatterlist.h>
+#include <asm/swiotlb.h>
+
+struct dma_mapping_ops {
+	int             (*mapping_error)(struct device *dev,
+					 dma_addr_t dma_addr);
+	void*           (*alloc_coherent)(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t gfp);
+	void            (*free_coherent)(struct device *dev, size_t size,
+				void *vaddr, dma_addr_t dma_handle);
+	dma_addr_t      (*map_single)(struct device *hwdev, unsigned long ptr,
+				size_t size, int direction);
+	void            (*unmap_single)(struct device *dev, dma_addr_t addr,
+				size_t size, int direction);
+	void            (*sync_single_for_cpu)(struct device *hwdev,
+				dma_addr_t dma_handle, size_t size,
+				int direction);
+	void            (*sync_single_for_device)(struct device *hwdev,
+				dma_addr_t dma_handle, size_t size,
+				int direction);
+	void            (*sync_single_range_for_cpu)(struct device *hwdev,
+				dma_addr_t dma_handle, unsigned long offset,
+				size_t size, int direction);
+	void            (*sync_single_range_for_device)(struct device *hwdev,
+				dma_addr_t dma_handle, unsigned long offset,
+				size_t size, int direction);
+	void            (*sync_sg_for_cpu)(struct device *hwdev,
+				struct scatterlist *sg, int nelems,
+				int direction);
+	void            (*sync_sg_for_device)(struct device *hwdev,
+				struct scatterlist *sg, int nelems,
+				int direction);
+	int             (*map_sg)(struct device *hwdev, struct scatterlist *sg,
+				int nents, int direction);
+	void            (*unmap_sg)(struct device *hwdev,
+				struct scatterlist *sg, int nents,
+				int direction);
+	int             (*dma_supported_op)(struct device *hwdev, u64 mask);
+	int		is_phys;
+};
+
+extern struct dma_mapping_ops *dma_ops;
+extern struct ia64_machine_vector ia64_mv;
+extern void set_iommu_machvec(void);
 
 #define dma_alloc_coherent(dev, size, handle, gfp)	\
 	platform_dma_alloc_coherent(dev, size, handle, (gfp) | GFP_DMA)
@@ -96,4 +139,11 @@
 
 #define dma_is_consistent(d, h)	(1)	/* all we do is coherent memory... */
 
+static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
+{
+	return dma_ops;
+}
+
+
+
 #endif /* _ASM_IA64_DMA_MAPPING_H */
diff --git a/arch/ia64/include/asm/iommu.h b/arch/ia64/include/asm/iommu.h
new file mode 100644
index 0000000..5fb2bb9
--- /dev/null
+++ b/arch/ia64/include/asm/iommu.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_IA64_IOMMU_H
+#define _ASM_IA64_IOMMU_H 1
+
+#define cpu_has_x2apic 0
+/* 10 seconds */
+#define DMAR_OPERATION_TIMEOUT (((cycles_t) local_cpu_data->itc_freq)*10)
+
+extern void pci_iommu_shutdown(void);
+extern void no_iommu_init(void);
+extern int force_iommu, no_iommu;
+extern int iommu_detected;
+extern void iommu_dma_init(void);
+extern void machvec_init(const char *name);
+extern int forbid_dac;
+
+#endif
diff --git a/arch/ia64/include/asm/kregs.h b/arch/ia64/include/asm/kregs.h
index aefcdfe..39e65f6 100644
--- a/arch/ia64/include/asm/kregs.h
+++ b/arch/ia64/include/asm/kregs.h
@@ -32,7 +32,7 @@
 #define IA64_TR_CURRENT_STACK	1	/* dtr1: maps kernel's memory- & register-stacks */
 
 #define IA64_TR_ALLOC_BASE	2 	/* itr&dtr: Base of dynamic TR resource*/
-#define IA64_TR_ALLOC_MAX	32 	/* Max number for dynamic use*/
+#define IA64_TR_ALLOC_MAX	64 	/* Max number for dynamic use*/
 
 /* Processor status register bits: */
 #define IA64_PSR_BE_BIT		1
diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h
index 2b850cc..1ea28bce 100644
--- a/arch/ia64/include/asm/machvec.h
+++ b/arch/ia64/include/asm/machvec.h
@@ -120,6 +120,8 @@
 #  include <asm/machvec_hpsim.h>
 # elif defined (CONFIG_IA64_DIG)
 #  include <asm/machvec_dig.h>
+# elif defined(CONFIG_IA64_DIG_VTD)
+#  include <asm/machvec_dig_vtd.h>
 # elif defined (CONFIG_IA64_HP_ZX1)
 #  include <asm/machvec_hpzx1.h>
 # elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
@@ -128,6 +130,8 @@
 #  include <asm/machvec_sn2.h>
 # elif defined (CONFIG_IA64_SGI_UV)
 #  include <asm/machvec_uv.h>
+# elif defined (CONFIG_IA64_XEN_GUEST)
+#  include <asm/machvec_xen.h>
 # elif defined (CONFIG_IA64_GENERIC)
 
 # ifdef MACHVEC_PLATFORM_HEADER
diff --git a/arch/ia64/include/asm/machvec_dig_vtd.h b/arch/ia64/include/asm/machvec_dig_vtd.h
new file mode 100644
index 0000000..3400b56
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_dig_vtd.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_MACHVEC_DIG_VTD_h
+#define _ASM_IA64_MACHVEC_DIG_VTD_h
+
+extern ia64_mv_setup_t			dig_setup;
+extern ia64_mv_dma_alloc_coherent	vtd_alloc_coherent;
+extern ia64_mv_dma_free_coherent	vtd_free_coherent;
+extern ia64_mv_dma_map_single_attrs	vtd_map_single_attrs;
+extern ia64_mv_dma_unmap_single_attrs	vtd_unmap_single_attrs;
+extern ia64_mv_dma_map_sg_attrs		vtd_map_sg_attrs;
+extern ia64_mv_dma_unmap_sg_attrs	vtd_unmap_sg_attrs;
+extern ia64_mv_dma_supported		iommu_dma_supported;
+extern ia64_mv_dma_mapping_error	vtd_dma_mapping_error;
+extern ia64_mv_dma_init			pci_iommu_alloc;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name				"dig_vtd"
+#define platform_setup				dig_setup
+#define platform_dma_init			pci_iommu_alloc
+#define platform_dma_alloc_coherent		vtd_alloc_coherent
+#define platform_dma_free_coherent		vtd_free_coherent
+#define platform_dma_map_single_attrs		vtd_map_single_attrs
+#define platform_dma_unmap_single_attrs		vtd_unmap_single_attrs
+#define platform_dma_map_sg_attrs		vtd_map_sg_attrs
+#define platform_dma_unmap_sg_attrs		vtd_unmap_sg_attrs
+#define platform_dma_sync_single_for_cpu	machvec_dma_sync_single
+#define platform_dma_sync_sg_for_cpu		machvec_dma_sync_sg
+#define platform_dma_sync_single_for_device	machvec_dma_sync_single
+#define platform_dma_sync_sg_for_device		machvec_dma_sync_sg
+#define platform_dma_supported			iommu_dma_supported
+#define platform_dma_mapping_error		vtd_dma_mapping_error
+
+#endif /* _ASM_IA64_MACHVEC_DIG_VTD_h */
diff --git a/arch/ia64/include/asm/machvec_init.h b/arch/ia64/include/asm/machvec_init.h
index 7f21249..ef964b2 100644
--- a/arch/ia64/include/asm/machvec_init.h
+++ b/arch/ia64/include/asm/machvec_init.h
@@ -1,3 +1,4 @@
+#include <asm/iommu.h>
 #include <asm/machvec.h>
 
 extern ia64_mv_send_ipi_t ia64_send_ipi;
diff --git a/arch/ia64/include/asm/machvec_xen.h b/arch/ia64/include/asm/machvec_xen.h
new file mode 100644
index 0000000..55f9228
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_xen.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_MACHVEC_XEN_h
+#define _ASM_IA64_MACHVEC_XEN_h
+
+extern ia64_mv_setup_t			dig_setup;
+extern ia64_mv_cpu_init_t		xen_cpu_init;
+extern ia64_mv_irq_init_t		xen_irq_init;
+extern ia64_mv_send_ipi_t		xen_platform_send_ipi;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name				"xen"
+#define platform_setup				dig_setup
+#define platform_cpu_init			xen_cpu_init
+#define platform_irq_init			xen_irq_init
+#define platform_send_ipi			xen_platform_send_ipi
+
+#endif /* _ASM_IA64_MACHVEC_XEN_h */
diff --git a/arch/ia64/include/asm/meminit.h b/arch/ia64/include/asm/meminit.h
index 7245a57..6bc96ee 100644
--- a/arch/ia64/include/asm/meminit.h
+++ b/arch/ia64/include/asm/meminit.h
@@ -18,10 +18,11 @@
  * 	- crash dumping code reserved region
  * 	- Kernel memory map built from EFI memory map
  * 	- ELF core header
+ *	- xen start info if CONFIG_XEN
  *
  * More could be added if necessary
  */
-#define IA64_MAX_RSVD_REGIONS 8
+#define IA64_MAX_RSVD_REGIONS 9
 
 struct rsvd_region {
 	unsigned long start;	/* virtual address of beginning of element */
diff --git a/arch/ia64/include/asm/native/inst.h b/arch/ia64/include/asm/native/inst.h
index c8efbf7..0a1026c 100644
--- a/arch/ia64/include/asm/native/inst.h
+++ b/arch/ia64/include/asm/native/inst.h
@@ -36,8 +36,13 @@
 	;;					\
 	movl clob = PARAVIRT_POISON;		\
 	;;
+# define CLOBBER_PRED(pred_clob)		\
+	;;					\
+	cmp.eq pred_clob, p0 = r0, r0		\
+	;;
 #else
-# define CLOBBER(clob)		/* nothing */
+# define CLOBBER(clob)			/* nothing */
+# define CLOBBER_PRED(pred_clob)	/* nothing */
 #endif
 
 #define MOV_FROM_IFA(reg)	\
@@ -136,7 +141,8 @@
 
 #define SSM_PSR_I(pred, pred_clob, clob)	\
 (pred)	ssm psr.i				\
-	CLOBBER(clob)
+	CLOBBER(clob)				\
+	CLOBBER_PRED(pred_clob)
 
 #define RSM_PSR_I(pred, clob0, clob1)	\
 (pred)	rsm psr.i			\
diff --git a/arch/ia64/include/asm/native/pvchk_inst.h b/arch/ia64/include/asm/native/pvchk_inst.h
new file mode 100644
index 0000000..b8e6eb1
--- /dev/null
+++ b/arch/ia64/include/asm/native/pvchk_inst.h
@@ -0,0 +1,263 @@
+#ifndef _ASM_NATIVE_PVCHK_INST_H
+#define _ASM_NATIVE_PVCHK_INST_H
+
+/******************************************************************************
+ * arch/ia64/include/asm/native/pvchk_inst.h
+ * Checker for paravirtualizations of privileged operations.
+ *
+ * Copyright (C) 2005 Hewlett-Packard Co
+ *      Dan Magenheimer <dan.magenheimer@hp.com>
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+/**********************************************
+ * Instructions paravirtualized for correctness
+ **********************************************/
+
+/* "fc" and "thash" are privilege-sensitive instructions, meaning they
+ *  may have different semantics depending on whether they are executed
+ *  at PL0 vs PL!=0.  When paravirtualized, these instructions mustn't
+ *  be allowed to execute directly, lest incorrect semantics result.
+ */
+
+#define fc	.error "fc should not be used directly."
+#define thash	.error "thash should not be used directly."
+
+/* Note that "ttag" and "cover" are also privilege-sensitive; "ttag"
+ * is not currently used (though it may be in a long-format VHPT system!)
+ * and the semantics of cover only change if psr.ic is off which is very
+ * rare (and currently non-existent outside of assembly code
+ */
+#define ttag	.error "ttag should not be used directly."
+#define cover	.error "cover should not be used directly."
+
+/* There are also privilege-sensitive registers.  These registers are
+ * readable at any privilege level but only writable at PL0.
+ */
+#define cpuid	.error "cpuid should not be used directly."
+#define pmd	.error "pmd should not be used directly."
+
+/*
+ * mov ar.eflag =
+ * mov = ar.eflag
+ */
+
+/**********************************************
+ * Instructions paravirtualized for performance
+ **********************************************/
+/*
+ * Those instructions include '.' which can't be handled by cpp.
+ * or can't be handled by cpp easily.
+ * They are handled by sed instead of cpp.
+ */
+
+/* for .S
+ * itc.i
+ * itc.d
+ *
+ * bsw.0
+ * bsw.1
+ *
+ * ssm psr.ic | PSR_DEFAULT_BITS
+ * ssm psr.ic
+ * rsm psr.ic
+ * ssm psr.i
+ * rsm psr.i
+ * rsm psr.i | psr.ic
+ * rsm psr.dt
+ * ssm psr.dt
+ *
+ * mov = cr.ifa
+ * mov = cr.itir
+ * mov = cr.isr
+ * mov = cr.iha
+ * mov = cr.ipsr
+ * mov = cr.iim
+ * mov = cr.iip
+ * mov = cr.ivr
+ * mov = psr
+ *
+ * mov cr.ifa =
+ * mov cr.itir =
+ * mov cr.iha =
+ * mov cr.ipsr =
+ * mov cr.ifs =
+ * mov cr.iip =
+ * mov cr.kr =
+ */
+
+/* for intrinsics
+ * ssm psr.i
+ * rsm psr.i
+ * mov = psr
+ * mov = ivr
+ * mov = tpr
+ * mov cr.itm =
+ * mov eoi =
+ * mov rr[] =
+ * mov = rr[]
+ * mov = kr
+ * mov kr =
+ * ptc.ga
+ */
+
+/*************************************************************
+ * define paravirtualized instrcution macros as nop to ingore.
+ * and check whether arguments are appropriate.
+ *************************************************************/
+
+/* check whether reg is a regular register */
+.macro is_rreg_in reg
+	.ifc "\reg", "r0"
+		nop 0
+		.exitm
+	.endif
+	;;
+	mov \reg = r0
+	;;
+.endm
+#define IS_RREG_IN(reg)	is_rreg_in reg ;
+
+#define IS_RREG_OUT(reg)			\
+	;;					\
+	mov reg = r0				\
+	;;
+
+#define IS_RREG_CLOB(reg)	IS_RREG_OUT(reg)
+
+/* check whether pred is a predicate register */
+#define IS_PRED_IN(pred)			\
+	;;					\
+	(pred)	nop 0				\
+	;;
+
+#define IS_PRED_OUT(pred)			\
+	;;					\
+	cmp.eq pred, p0 = r0, r0		\
+	;;
+
+#define IS_PRED_CLOB(pred)	IS_PRED_OUT(pred)
+
+
+#define DO_SAVE_MIN(__COVER, SAVE_IFS, EXTRA, WORKAROUND)	\
+	nop 0
+#define MOV_FROM_IFA(reg)			\
+	IS_RREG_OUT(reg)
+#define MOV_FROM_ITIR(reg)			\
+	IS_RREG_OUT(reg)
+#define MOV_FROM_ISR(reg)			\
+	IS_RREG_OUT(reg)
+#define MOV_FROM_IHA(reg)			\
+	IS_RREG_OUT(reg)
+#define MOV_FROM_IPSR(pred, reg)		\
+	IS_PRED_IN(pred)			\
+	IS_RREG_OUT(reg)
+#define MOV_FROM_IIM(reg)			\
+	IS_RREG_OUT(reg)
+#define MOV_FROM_IIP(reg)			\
+	IS_RREG_OUT(reg)
+#define MOV_FROM_IVR(reg, clob)			\
+	IS_RREG_OUT(reg)			\
+	IS_RREG_CLOB(clob)
+#define MOV_FROM_PSR(pred, reg, clob)		\
+	IS_PRED_IN(pred)			\
+	IS_RREG_OUT(reg)			\
+	IS_RREG_CLOB(clob)
+#define MOV_TO_IFA(reg, clob)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define MOV_TO_ITIR(pred, reg, clob)		\
+	IS_PRED_IN(pred)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define MOV_TO_IHA(pred, reg, clob)		\
+	IS_PRED_IN(pred)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define MOV_TO_IPSR(pred, reg, clob)		\
+	IS_PRED_IN(pred)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define MOV_TO_IFS(pred, reg, clob)		\
+	IS_PRED_IN(pred)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define MOV_TO_IIP(reg, clob)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define MOV_TO_KR(kr, reg, clob0, clob1)	\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob0)			\
+	IS_RREG_CLOB(clob1)
+#define ITC_I(pred, reg, clob)			\
+	IS_PRED_IN(pred)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define ITC_D(pred, reg, clob)			\
+	IS_PRED_IN(pred)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define ITC_I_AND_D(pred_i, pred_d, reg, clob)	\
+	IS_PRED_IN(pred_i)			\
+	IS_PRED_IN(pred_d)			\
+	IS_RREG_IN(reg)				\
+	IS_RREG_CLOB(clob)
+#define THASH(pred, reg0, reg1, clob)		\
+	IS_PRED_IN(pred)			\
+	IS_RREG_OUT(reg0)			\
+	IS_RREG_IN(reg1)			\
+	IS_RREG_CLOB(clob)
+#define SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(clob0, clob1)	\
+	IS_RREG_CLOB(clob0)					\
+	IS_RREG_CLOB(clob1)
+#define SSM_PSR_IC_AND_SRLZ_D(clob0, clob1)	\
+	IS_RREG_CLOB(clob0)			\
+	IS_RREG_CLOB(clob1)
+#define RSM_PSR_IC(clob)			\
+	IS_RREG_CLOB(clob)
+#define SSM_PSR_I(pred, pred_clob, clob)	\
+	IS_PRED_IN(pred)			\
+	IS_PRED_CLOB(pred_clob)			\
+	IS_RREG_CLOB(clob)
+#define RSM_PSR_I(pred, clob0, clob1)		\
+	IS_PRED_IN(pred)			\
+	IS_RREG_CLOB(clob0)			\
+	IS_RREG_CLOB(clob1)
+#define RSM_PSR_I_IC(clob0, clob1, clob2)	\
+	IS_RREG_CLOB(clob0)			\
+	IS_RREG_CLOB(clob1)			\
+	IS_RREG_CLOB(clob2)
+#define RSM_PSR_DT				\
+	nop 0
+#define SSM_PSR_DT_AND_SRLZ_I			\
+	nop 0
+#define BSW_0(clob0, clob1, clob2)		\
+	IS_RREG_CLOB(clob0)			\
+	IS_RREG_CLOB(clob1)			\
+	IS_RREG_CLOB(clob2)
+#define BSW_1(clob0, clob1)			\
+	IS_RREG_CLOB(clob0)			\
+	IS_RREG_CLOB(clob1)
+#define COVER					\
+	nop 0
+#define RFI					\
+	br.ret.sptk.many rp /* defining nop causes dependency error */
+
+#endif /* _ASM_NATIVE_PVCHK_INST_H */
diff --git a/arch/ia64/include/asm/paravirt.h b/arch/ia64/include/asm/paravirt.h
index 660cab0..2bf3636 100644
--- a/arch/ia64/include/asm/paravirt.h
+++ b/arch/ia64/include/asm/paravirt.h
@@ -117,7 +117,7 @@
 struct pv_iosapic_ops {
 	void (*pcat_compat_init)(void);
 
-	struct irq_chip *(*get_irq_chip)(unsigned long trigger);
+	struct irq_chip *(*__get_irq_chip)(unsigned long trigger);
 
 	unsigned int (*__read)(char __iomem *iosapic, unsigned int reg);
 	void (*__write)(char __iomem *iosapic, unsigned int reg, u32 val);
@@ -135,7 +135,7 @@
 static inline struct irq_chip*
 iosapic_get_irq_chip(unsigned long trigger)
 {
-	return pv_iosapic_ops.get_irq_chip(trigger);
+	return pv_iosapic_ops.__get_irq_chip(trigger);
 }
 
 static inline unsigned int
diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h
index ce342fb..1d660d8 100644
--- a/arch/ia64/include/asm/pci.h
+++ b/arch/ia64/include/asm/pci.h
@@ -156,4 +156,7 @@
 	return channel ? isa_irq_to_vector(15) : isa_irq_to_vector(14);
 }
 
+#ifdef CONFIG_DMAR
+extern void pci_iommu_alloc(void);
+#endif
 #endif /* _ASM_IA64_PCI_H */
diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h
index 15f8dcf..6417c1e 100644
--- a/arch/ia64/include/asm/ptrace.h
+++ b/arch/ia64/include/asm/ptrace.h
@@ -240,6 +240,12 @@
  */
 # define instruction_pointer(regs) ((regs)->cr_iip + ia64_psr(regs)->ri)
 
+static inline unsigned long user_stack_pointer(struct pt_regs *regs)
+{
+	/* FIXME: should this be bspstore + nr_dirty regs? */
+	return regs->ar_bspstore;
+}
+
 #define regs_return_value(regs) ((regs)->r8)
 
 /* Conserve space in histogram by encoding slot bits in address
@@ -319,6 +325,8 @@
   #define arch_has_block_step()   (1)
   extern void user_enable_block_step(struct task_struct *);
 
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
 #endif /* !__KERNEL__ */
 
 /* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
diff --git a/arch/ia64/include/asm/pvclock-abi.h b/arch/ia64/include/asm/pvclock-abi.h
new file mode 100644
index 0000000..44ef9ef
--- /dev/null
+++ b/arch/ia64/include/asm/pvclock-abi.h
@@ -0,0 +1,48 @@
+/*
+ * same structure to x86's
+ * Hopefully asm-x86/pvclock-abi.h would be moved to somewhere more generic.
+ * For now, define same duplicated definitions.
+ */
+
+#ifndef _ASM_IA64__PVCLOCK_ABI_H
+#define _ASM_IA64__PVCLOCK_ABI_H
+#ifndef __ASSEMBLY__
+
+/*
+ * These structs MUST NOT be changed.
+ * They are the ABI between hypervisor and guest OS.
+ * Both Xen and KVM are using this.
+ *
+ * pvclock_vcpu_time_info holds the system time and the tsc timestamp
+ * of the last update. So the guest can use the tsc delta to get a
+ * more precise system time.  There is one per virtual cpu.
+ *
+ * pvclock_wall_clock references the point in time when the system
+ * time was zero (usually boot time), thus the guest calculates the
+ * current wall clock by adding the system time.
+ *
+ * Protocol for the "version" fields is: hypervisor raises it (making
+ * it uneven) before it starts updating the fields and raises it again
+ * (making it even) when it is done.  Thus the guest can make sure the
+ * time values it got are consistent by checking the version before
+ * and after reading them.
+ */
+
+struct pvclock_vcpu_time_info {
+	u32   version;
+	u32   pad0;
+	u64   tsc_timestamp;
+	u64   system_time;
+	u32   tsc_to_system_mul;
+	s8    tsc_shift;
+	u8    pad[3];
+} __attribute__((__packed__)); /* 32 bytes */
+
+struct pvclock_wall_clock {
+	u32   version;
+	u32   sec;
+	u32   nsec;
+} __attribute__((__packed__));
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_IA64__PVCLOCK_ABI_H */
diff --git a/arch/ia64/include/asm/swiotlb.h b/arch/ia64/include/asm/swiotlb.h
new file mode 100644
index 0000000..fb79423
--- /dev/null
+++ b/arch/ia64/include/asm/swiotlb.h
@@ -0,0 +1,56 @@
+#ifndef ASM_IA64__SWIOTLB_H
+#define ASM_IA64__SWIOTLB_H
+
+#include <linux/dma-mapping.h>
+
+/* SWIOTLB interface */
+
+extern dma_addr_t swiotlb_map_single(struct device *hwdev, void *ptr,
+				     size_t size, int dir);
+extern void *swiotlb_alloc_coherent(struct device *hwdev, size_t size,
+				    dma_addr_t *dma_handle, gfp_t flags);
+extern void swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr,
+				 size_t size, int dir);
+extern void swiotlb_sync_single_for_cpu(struct device *hwdev,
+					dma_addr_t dev_addr,
+					size_t size, int dir);
+extern void swiotlb_sync_single_for_device(struct device *hwdev,
+					   dma_addr_t dev_addr,
+					   size_t size, int dir);
+extern void swiotlb_sync_single_range_for_cpu(struct device *hwdev,
+					      dma_addr_t dev_addr,
+					      unsigned long offset,
+					      size_t size, int dir);
+extern void swiotlb_sync_single_range_for_device(struct device *hwdev,
+						 dma_addr_t dev_addr,
+						 unsigned long offset,
+						 size_t size, int dir);
+extern void swiotlb_sync_sg_for_cpu(struct device *hwdev,
+				    struct scatterlist *sg, int nelems,
+				    int dir);
+extern void swiotlb_sync_sg_for_device(struct device *hwdev,
+				       struct scatterlist *sg, int nelems,
+				       int dir);
+extern int swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg,
+			  int nents, int direction);
+extern void swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg,
+			     int nents, int direction);
+extern int swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr);
+extern void swiotlb_free_coherent(struct device *hwdev, size_t size,
+				  void *vaddr, dma_addr_t dma_handle);
+extern int swiotlb_dma_supported(struct device *hwdev, u64 mask);
+extern void swiotlb_init(void);
+
+extern int swiotlb_force;
+
+#ifdef CONFIG_SWIOTLB
+extern int swiotlb;
+extern void pci_swiotlb_init(void);
+#else
+#define swiotlb 0
+static inline void pci_swiotlb_init(void)
+{
+}
+#endif
+
+#endif /* ASM_IA64__SWIOTLB_H */
diff --git a/arch/ia64/include/asm/sync_bitops.h b/arch/ia64/include/asm/sync_bitops.h
new file mode 100644
index 0000000..593c12e
--- /dev/null
+++ b/arch/ia64/include/asm/sync_bitops.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_IA64_SYNC_BITOPS_H
+#define _ASM_IA64_SYNC_BITOPS_H
+
+/*
+ * Copyright (C) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *
+ * Based on synch_bitops.h which Dan Magenhaimer wrote.
+ *
+ * bit operations which provide guaranteed strong synchronisation
+ * when communicating with Xen or other guest OSes running on other CPUs.
+ */
+
+static inline void sync_set_bit(int nr, volatile void *addr)
+{
+	set_bit(nr, addr);
+}
+
+static inline void sync_clear_bit(int nr, volatile void *addr)
+{
+	clear_bit(nr, addr);
+}
+
+static inline void sync_change_bit(int nr, volatile void *addr)
+{
+	change_bit(nr, addr);
+}
+
+static inline int sync_test_and_set_bit(int nr, volatile void *addr)
+{
+	return test_and_set_bit(nr, addr);
+}
+
+static inline int sync_test_and_clear_bit(int nr, volatile void *addr)
+{
+	return test_and_clear_bit(nr, addr);
+}
+
+static inline int sync_test_and_change_bit(int nr, volatile void *addr)
+{
+	return test_and_change_bit(nr, addr);
+}
+
+static inline int sync_test_bit(int nr, const volatile void *addr)
+{
+	return test_bit(nr, addr);
+}
+
+#define sync_cmpxchg(ptr, old, new)				\
+	((__typeof__(*(ptr)))cmpxchg_acq((ptr), (old), (new)))
+
+#endif /* _ASM_IA64_SYNC_BITOPS_H */
diff --git a/arch/ia64/include/asm/syscall.h b/arch/ia64/include/asm/syscall.h
new file mode 100644
index 0000000..2f758a4
--- /dev/null
+++ b/arch/ia64/include/asm/syscall.h
@@ -0,0 +1,163 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * Copyright (C) 2008 Intel Corp.  Shaohua Li <shaohua.li@intel.com>
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * See asm-generic/syscall.h for descriptions of what we must do here.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H	1
+
+#include <linux/sched.h>
+#include <linux/err.h>
+
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	if ((long)regs->cr_ifs < 0) /* Not a syscall */
+		return -1;
+
+#ifdef CONFIG_IA32_SUPPORT
+	if (IS_IA32_PROCESS(regs))
+		return regs->r1;
+#endif
+
+	return regs->r15;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+#ifdef CONFIG_IA32_SUPPORT
+	if (IS_IA32_PROCESS(regs))
+		regs->r8 = regs->r1;
+#endif
+
+	/* do nothing */
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+#ifdef CONFIG_IA32_SUPPORT
+	if (IS_IA32_PROCESS(regs))
+		return regs->r8;
+#endif
+
+	return regs->r10 == -1 ? regs->r8:0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->r8;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+#ifdef CONFIG_IA32_SUPPORT
+	if (IS_IA32_PROCESS(regs)) {
+		regs->r8 = (long) error ? error : val;
+		return;
+	}
+#endif
+
+	if (error) {
+		/* error < 0, but ia64 uses > 0 return value */
+		regs->r8 = -error;
+		regs->r10 = -1;
+	} else {
+		regs->r8 = val;
+		regs->r10 = 0;
+	}
+}
+
+extern void ia64_syscall_get_set_arguments(struct task_struct *task,
+	struct pt_regs *regs, unsigned int i, unsigned int n,
+	unsigned long *args, int rw);
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+
+#ifdef CONFIG_IA32_SUPPORT
+	if (IS_IA32_PROCESS(regs)) {
+		switch (i + n) {
+		case 6:
+			if (!n--) break;
+			*args++ = regs->r13;
+		case 5:
+			if (!n--) break;
+			*args++ = regs->r15;
+		case 4:
+			if (!n--) break;
+			*args++ = regs->r14;
+		case 3:
+			if (!n--) break;
+			*args++ = regs->r10;
+		case 2:
+			if (!n--) break;
+			*args++ = regs->r9;
+		case 1:
+			if (!n--) break;
+			*args++ = regs->r11;
+		case 0:
+			if (!n--) break;
+		default:
+			BUG();
+			break;
+		}
+
+		return;
+	}
+#endif
+	ia64_syscall_get_set_arguments(task, regs, i, n, args, 0);
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+
+#ifdef CONFIG_IA32_SUPPORT
+	if (IS_IA32_PROCESS(regs)) {
+		switch (i + n) {
+		case 6:
+			if (!n--) break;
+			regs->r13 = *args++;
+		case 5:
+			if (!n--) break;
+			regs->r15 = *args++;
+		case 4:
+			if (!n--) break;
+			regs->r14 = *args++;
+		case 3:
+			if (!n--) break;
+			regs->r10 = *args++;
+		case 2:
+			if (!n--) break;
+			regs->r9 = *args++;
+		case 1:
+			if (!n--) break;
+			regs->r11 = *args++;
+		case 0:
+			if (!n--) break;
+		}
+
+		return;
+	}
+#endif
+	ia64_syscall_get_set_arguments(task, regs, i, n, args, 1);
+}
+#endif	/* _ASM_SYSCALL_H */
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
index 7c60fcd..ae69226 100644
--- a/arch/ia64/include/asm/thread_info.h
+++ b/arch/ia64/include/asm/thread_info.h
@@ -87,9 +87,6 @@
 #define alloc_task_struct()	((struct task_struct *)__get_free_pages(GFP_KERNEL | __GFP_COMP, KERNEL_STACK_SIZE_ORDER))
 #define free_task_struct(tsk)	free_pages((unsigned long) (tsk), KERNEL_STACK_SIZE_ORDER)
 
-#define tsk_set_notify_resume(tsk) \
-	set_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME)
-extern void tsk_clear_notify_resume(struct task_struct *tsk);
 #endif /* !__ASSEMBLY */
 
 /*
diff --git a/arch/ia64/include/asm/timex.h b/arch/ia64/include/asm/timex.h
index 05a6baf..4e03cfe 100644
--- a/arch/ia64/include/asm/timex.h
+++ b/arch/ia64/include/asm/timex.h
@@ -39,4 +39,6 @@
 	return ret;
 }
 
+extern void ia64_cpu_local_tick (void);
+
 #endif /* _ASM_IA64_TIMEX_H */
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index d535833..f791576 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -337,6 +337,7 @@
 # define __ARCH_WANT_SYS_NICE
 # define __ARCH_WANT_SYS_OLD_GETRLIMIT
 # define __ARCH_WANT_SYS_OLDUMOUNT
+# define __ARCH_WANT_SYS_PAUSE
 # define __ARCH_WANT_SYS_SIGPENDING
 # define __ARCH_WANT_SYS_SIGPROCMASK
 # define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
diff --git a/arch/ia64/include/asm/xen/events.h b/arch/ia64/include/asm/xen/events.h
new file mode 100644
index 0000000..73248781
--- /dev/null
+++ b/arch/ia64/include/asm/xen/events.h
@@ -0,0 +1,50 @@
+/******************************************************************************
+ * arch/ia64/include/asm/xen/events.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#ifndef _ASM_IA64_XEN_EVENTS_H
+#define _ASM_IA64_XEN_EVENTS_H
+
+enum ipi_vector {
+	XEN_RESCHEDULE_VECTOR,
+	XEN_IPI_VECTOR,
+	XEN_CMCP_VECTOR,
+	XEN_CPEP_VECTOR,
+
+	XEN_NR_IPIS,
+};
+
+static inline int xen_irqs_disabled(struct pt_regs *regs)
+{
+	return !(ia64_psr(regs)->i);
+}
+
+static inline void xen_do_IRQ(int irq, struct pt_regs *regs)
+{
+	struct pt_regs *old_regs;
+	old_regs = set_irq_regs(regs);
+	irq_enter();
+	__do_IRQ(irq);
+	irq_exit();
+	set_irq_regs(old_regs);
+}
+#define irq_ctx_init(cpu)	do { } while (0)
+
+#endif /* _ASM_IA64_XEN_EVENTS_H */
diff --git a/arch/ia64/include/asm/xen/grant_table.h b/arch/ia64/include/asm/xen/grant_table.h
new file mode 100644
index 0000000..2b1fae0
--- /dev/null
+++ b/arch/ia64/include/asm/xen/grant_table.h
@@ -0,0 +1,29 @@
+/******************************************************************************
+ * arch/ia64/include/asm/xen/grant_table.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ASM_IA64_XEN_GRANT_TABLE_H
+#define _ASM_IA64_XEN_GRANT_TABLE_H
+
+struct vm_struct *xen_alloc_vm_area(unsigned long size);
+void xen_free_vm_area(struct vm_struct *area);
+
+#endif /* _ASM_IA64_XEN_GRANT_TABLE_H */
diff --git a/arch/ia64/include/asm/xen/hypercall.h b/arch/ia64/include/asm/xen/hypercall.h
new file mode 100644
index 0000000..96fc623
--- /dev/null
+++ b/arch/ia64/include/asm/xen/hypercall.h
@@ -0,0 +1,265 @@
+/******************************************************************************
+ * hypercall.h
+ *
+ * Linux-specific hypervisor handling.
+ *
+ * Copyright (c) 2002-2004, K A Fraser
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _ASM_IA64_XEN_HYPERCALL_H
+#define _ASM_IA64_XEN_HYPERCALL_H
+
+#include <xen/interface/xen.h>
+#include <xen/interface/physdev.h>
+#include <xen/interface/sched.h>
+#include <asm/xen/xcom_hcall.h>
+struct xencomm_handle;
+extern unsigned long __hypercall(unsigned long a1, unsigned long a2,
+				 unsigned long a3, unsigned long a4,
+				 unsigned long a5, unsigned long cmd);
+
+/*
+ * Assembler stubs for hyper-calls.
+ */
+
+#define _hypercall0(type, name)					\
+({								\
+	long __res;						\
+	__res = __hypercall(0, 0, 0, 0, 0, __HYPERVISOR_##name);\
+	(type)__res;						\
+})
+
+#define _hypercall1(type, name, a1)				\
+({								\
+	long __res;						\
+	__res = __hypercall((unsigned long)a1,			\
+			     0, 0, 0, 0, __HYPERVISOR_##name);	\
+	(type)__res;						\
+})
+
+#define _hypercall2(type, name, a1, a2)				\
+({								\
+	long __res;						\
+	__res = __hypercall((unsigned long)a1,			\
+			    (unsigned long)a2,			\
+			    0, 0, 0, __HYPERVISOR_##name);	\
+	(type)__res;						\
+})
+
+#define _hypercall3(type, name, a1, a2, a3)			\
+({								\
+	long __res;						\
+	__res = __hypercall((unsigned long)a1,			\
+			    (unsigned long)a2,			\
+			    (unsigned long)a3,			\
+			    0, 0, __HYPERVISOR_##name);		\
+	(type)__res;						\
+})
+
+#define _hypercall4(type, name, a1, a2, a3, a4)			\
+({								\
+	long __res;						\
+	__res = __hypercall((unsigned long)a1,			\
+			    (unsigned long)a2,			\
+			    (unsigned long)a3,			\
+			    (unsigned long)a4,			\
+			    0, __HYPERVISOR_##name);		\
+	(type)__res;						\
+})
+
+#define _hypercall5(type, name, a1, a2, a3, a4, a5)		\
+({								\
+	long __res;						\
+	__res = __hypercall((unsigned long)a1,			\
+			    (unsigned long)a2,			\
+			    (unsigned long)a3,			\
+			    (unsigned long)a4,			\
+			    (unsigned long)a5,			\
+			    __HYPERVISOR_##name);		\
+	(type)__res;						\
+})
+
+
+static inline int
+xencomm_arch_hypercall_sched_op(int cmd, struct xencomm_handle *arg)
+{
+	return _hypercall2(int, sched_op_new, cmd, arg);
+}
+
+static inline long
+HYPERVISOR_set_timer_op(u64 timeout)
+{
+	unsigned long timeout_hi = (unsigned long)(timeout >> 32);
+	unsigned long timeout_lo = (unsigned long)timeout;
+	return _hypercall2(long, set_timer_op, timeout_lo, timeout_hi);
+}
+
+static inline int
+xencomm_arch_hypercall_multicall(struct xencomm_handle *call_list,
+				 int nr_calls)
+{
+	return _hypercall2(int, multicall, call_list, nr_calls);
+}
+
+static inline int
+xencomm_arch_hypercall_memory_op(unsigned int cmd, struct xencomm_handle *arg)
+{
+	return _hypercall2(int, memory_op, cmd, arg);
+}
+
+static inline int
+xencomm_arch_hypercall_event_channel_op(int cmd, struct xencomm_handle *arg)
+{
+	return _hypercall2(int, event_channel_op, cmd, arg);
+}
+
+static inline int
+xencomm_arch_hypercall_xen_version(int cmd, struct xencomm_handle *arg)
+{
+	return _hypercall2(int, xen_version, cmd, arg);
+}
+
+static inline int
+xencomm_arch_hypercall_console_io(int cmd, int count,
+				  struct xencomm_handle *str)
+{
+	return _hypercall3(int, console_io, cmd, count, str);
+}
+
+static inline int
+xencomm_arch_hypercall_physdev_op(int cmd, struct xencomm_handle *arg)
+{
+	return _hypercall2(int, physdev_op, cmd, arg);
+}
+
+static inline int
+xencomm_arch_hypercall_grant_table_op(unsigned int cmd,
+				      struct xencomm_handle *uop,
+				      unsigned int count)
+{
+	return _hypercall3(int, grant_table_op, cmd, uop, count);
+}
+
+int HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count);
+
+extern int xencomm_arch_hypercall_suspend(struct xencomm_handle *arg);
+
+static inline int
+xencomm_arch_hypercall_callback_op(int cmd, struct xencomm_handle *arg)
+{
+	return _hypercall2(int, callback_op, cmd, arg);
+}
+
+static inline long
+xencomm_arch_hypercall_vcpu_op(int cmd, int cpu, void *arg)
+{
+	return _hypercall3(long, vcpu_op, cmd, cpu, arg);
+}
+
+static inline int
+HYPERVISOR_physdev_op(int cmd, void *arg)
+{
+	switch (cmd) {
+	case PHYSDEVOP_eoi:
+		return _hypercall1(int, ia64_fast_eoi,
+				   ((struct physdev_eoi *)arg)->irq);
+	default:
+		return xencomm_hypercall_physdev_op(cmd, arg);
+	}
+}
+
+static inline long
+xencomm_arch_hypercall_opt_feature(struct xencomm_handle *arg)
+{
+	return _hypercall1(long, opt_feature, arg);
+}
+
+/* for balloon driver */
+#define HYPERVISOR_update_va_mapping(va, new_val, flags) (0)
+
+/* Use xencomm to do hypercalls.  */
+#define HYPERVISOR_sched_op xencomm_hypercall_sched_op
+#define HYPERVISOR_event_channel_op xencomm_hypercall_event_channel_op
+#define HYPERVISOR_callback_op xencomm_hypercall_callback_op
+#define HYPERVISOR_multicall xencomm_hypercall_multicall
+#define HYPERVISOR_xen_version xencomm_hypercall_xen_version
+#define HYPERVISOR_console_io xencomm_hypercall_console_io
+#define HYPERVISOR_memory_op xencomm_hypercall_memory_op
+#define HYPERVISOR_suspend xencomm_hypercall_suspend
+#define HYPERVISOR_vcpu_op xencomm_hypercall_vcpu_op
+#define HYPERVISOR_opt_feature xencomm_hypercall_opt_feature
+
+/* to compile gnttab_copy_grant_page() in drivers/xen/core/gnttab.c */
+#define HYPERVISOR_mmu_update(req, count, success_count, domid) ({ BUG(); 0; })
+
+static inline int
+HYPERVISOR_shutdown(
+	unsigned int reason)
+{
+	struct sched_shutdown sched_shutdown = {
+		.reason = reason
+	};
+
+	int rc = HYPERVISOR_sched_op(SCHEDOP_shutdown, &sched_shutdown);
+
+	return rc;
+}
+
+/* for netfront.c, netback.c */
+#define MULTI_UVMFLAGS_INDEX 0 /* XXX any value */
+
+static inline void
+MULTI_update_va_mapping(
+	struct multicall_entry *mcl, unsigned long va,
+	pte_t new_val, unsigned long flags)
+{
+	mcl->op = __HYPERVISOR_update_va_mapping;
+	mcl->result = 0;
+}
+
+static inline void
+MULTI_grant_table_op(struct multicall_entry *mcl, unsigned int cmd,
+	void *uop, unsigned int count)
+{
+	mcl->op = __HYPERVISOR_grant_table_op;
+	mcl->args[0] = cmd;
+	mcl->args[1] = (unsigned long)uop;
+	mcl->args[2] = count;
+}
+
+static inline void
+MULTI_mmu_update(struct multicall_entry *mcl, struct mmu_update *req,
+		 int count, int *success_count, domid_t domid)
+{
+	mcl->op = __HYPERVISOR_mmu_update;
+	mcl->args[0] = (unsigned long)req;
+	mcl->args[1] = count;
+	mcl->args[2] = (unsigned long)success_count;
+	mcl->args[3] = domid;
+}
+
+#endif /* _ASM_IA64_XEN_HYPERCALL_H */
diff --git a/arch/ia64/include/asm/xen/hypervisor.h b/arch/ia64/include/asm/xen/hypervisor.h
new file mode 100644
index 0000000..7a804e8
--- /dev/null
+++ b/arch/ia64/include/asm/xen/hypervisor.h
@@ -0,0 +1,89 @@
+/******************************************************************************
+ * hypervisor.h
+ *
+ * Linux-specific hypervisor handling.
+ *
+ * Copyright (c) 2002-2004, K A Fraser
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _ASM_IA64_XEN_HYPERVISOR_H
+#define _ASM_IA64_XEN_HYPERVISOR_H
+
+#ifdef CONFIG_XEN
+
+#include <linux/init.h>
+#include <xen/interface/xen.h>
+#include <xen/interface/version.h>	/* to compile feature.c */
+#include <xen/features.h>		/* to comiple xen-netfront.c */
+#include <asm/xen/hypercall.h>
+
+/* xen_domain_type is set before executing any C code by early_xen_setup */
+enum xen_domain_type {
+	XEN_NATIVE,
+	XEN_PV_DOMAIN,
+	XEN_HVM_DOMAIN,
+};
+
+extern enum xen_domain_type xen_domain_type;
+
+#define xen_domain()		(xen_domain_type != XEN_NATIVE)
+#define xen_pv_domain()		(xen_domain_type == XEN_PV_DOMAIN)
+#define xen_initial_domain()	(xen_pv_domain() && \
+				 (xen_start_info->flags & SIF_INITDOMAIN))
+#define xen_hvm_domain()	(xen_domain_type == XEN_HVM_DOMAIN)
+
+/* deprecated. remove this */
+#define is_running_on_xen()	(xen_domain_type == XEN_PV_DOMAIN)
+
+extern struct shared_info *HYPERVISOR_shared_info;
+extern struct start_info *xen_start_info;
+
+void __init xen_setup_vcpu_info_placement(void);
+void force_evtchn_callback(void);
+
+/* for drivers/xen/balloon/balloon.c */
+#ifdef CONFIG_XEN_SCRUB_PAGES
+#define scrub_pages(_p, _n) memset((void *)(_p), 0, (_n) << PAGE_SHIFT)
+#else
+#define scrub_pages(_p, _n) ((void)0)
+#endif
+
+/* For setup_arch() in arch/ia64/kernel/setup.c */
+void xen_ia64_enable_opt_feature(void);
+
+#else /* CONFIG_XEN */
+
+#define xen_domain()		(0)
+#define xen_pv_domain()		(0)
+#define xen_initial_domain()	(0)
+#define xen_hvm_domain()	(0)
+#define is_running_on_xen()	(0)	/* deprecated. remove this */
+#endif
+
+#define is_initial_xendomain()	(0)	/* deprecated. remove this */
+
+#endif /* _ASM_IA64_XEN_HYPERVISOR_H */
diff --git a/arch/ia64/include/asm/xen/inst.h b/arch/ia64/include/asm/xen/inst.h
new file mode 100644
index 0000000..19c2ae1
--- /dev/null
+++ b/arch/ia64/include/asm/xen/inst.h
@@ -0,0 +1,458 @@
+/******************************************************************************
+ * arch/ia64/include/asm/xen/inst.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <asm/xen/privop.h>
+
+#define ia64_ivt				xen_ivt
+#define DO_SAVE_MIN				XEN_DO_SAVE_MIN
+
+#define __paravirt_switch_to			xen_switch_to
+#define __paravirt_leave_syscall		xen_leave_syscall
+#define __paravirt_work_processed_syscall	xen_work_processed_syscall
+#define __paravirt_leave_kernel			xen_leave_kernel
+#define __paravirt_pending_syscall_end		xen_work_pending_syscall_end
+#define __paravirt_work_processed_syscall_target \
+						xen_work_processed_syscall
+
+#define MOV_FROM_IFA(reg)	\
+	movl reg = XSI_IFA;	\
+	;;			\
+	ld8 reg = [reg]
+
+#define MOV_FROM_ITIR(reg)	\
+	movl reg = XSI_ITIR;	\
+	;;			\
+	ld8 reg = [reg]
+
+#define MOV_FROM_ISR(reg)	\
+	movl reg = XSI_ISR;	\
+	;;			\
+	ld8 reg = [reg]
+
+#define MOV_FROM_IHA(reg)	\
+	movl reg = XSI_IHA;	\
+	;;			\
+	ld8 reg = [reg]
+
+#define MOV_FROM_IPSR(pred, reg)	\
+(pred)	movl reg = XSI_IPSR;		\
+	;;				\
+(pred)	ld8 reg = [reg]
+
+#define MOV_FROM_IIM(reg)	\
+	movl reg = XSI_IIM;	\
+	;;			\
+	ld8 reg = [reg]
+
+#define MOV_FROM_IIP(reg)	\
+	movl reg = XSI_IIP;	\
+	;;			\
+	ld8 reg = [reg]
+
+.macro __MOV_FROM_IVR reg, clob
+	.ifc "\reg", "r8"
+		XEN_HYPER_GET_IVR
+		.exitm
+	.endif
+	.ifc "\clob", "r8"
+		XEN_HYPER_GET_IVR
+		;;
+		mov \reg = r8
+		.exitm
+	.endif
+
+	mov \clob = r8
+	;;
+	XEN_HYPER_GET_IVR
+	;;
+	mov \reg = r8
+	;;
+	mov r8 = \clob
+.endm
+#define MOV_FROM_IVR(reg, clob)	__MOV_FROM_IVR reg, clob
+
+.macro __MOV_FROM_PSR pred, reg, clob
+	.ifc "\reg", "r8"
+		(\pred)	XEN_HYPER_GET_PSR;
+		.exitm
+	.endif
+	.ifc "\clob", "r8"
+		(\pred)	XEN_HYPER_GET_PSR
+		;;
+		(\pred)	mov \reg = r8
+		.exitm
+	.endif
+
+	(\pred)	mov \clob = r8
+	(\pred)	XEN_HYPER_GET_PSR
+	;;
+	(\pred)	mov \reg = r8
+	(\pred)	mov r8 = \clob
+.endm
+#define MOV_FROM_PSR(pred, reg, clob)	__MOV_FROM_PSR pred, reg, clob
+
+
+#define MOV_TO_IFA(reg, clob)	\
+	movl clob = XSI_IFA;	\
+	;;			\
+	st8 [clob] = reg	\
+
+#define MOV_TO_ITIR(pred, reg, clob)	\
+(pred)	movl clob = XSI_ITIR;		\
+	;;				\
+(pred)	st8 [clob] = reg
+
+#define MOV_TO_IHA(pred, reg, clob)	\
+(pred)	movl clob = XSI_IHA;		\
+	;;				\
+(pred)	st8 [clob] = reg
+
+#define MOV_TO_IPSR(pred, reg, clob)	\
+(pred)	movl clob = XSI_IPSR;		\
+	;;				\
+(pred)	st8 [clob] = reg;		\
+	;;
+
+#define MOV_TO_IFS(pred, reg, clob)	\
+(pred)	movl clob = XSI_IFS;		\
+	;;				\
+(pred)	st8 [clob] = reg;		\
+	;;
+
+#define MOV_TO_IIP(reg, clob)	\
+	movl clob = XSI_IIP;	\
+	;;			\
+	st8 [clob] = reg
+
+.macro ____MOV_TO_KR kr, reg, clob0, clob1
+	.ifc "\clob0", "r9"
+		.error "clob0 \clob0 must not be r9"
+	.endif
+	.ifc "\clob1", "r8"
+		.error "clob1 \clob1 must not be r8"
+	.endif
+
+	.ifnc "\reg", "r9"
+		.ifnc "\clob1", "r9"
+			mov \clob1 = r9
+		.endif
+		mov r9 = \reg
+	.endif
+	.ifnc "\clob0", "r8"
+		mov \clob0 = r8
+	.endif
+	mov r8 = \kr
+	;;
+	XEN_HYPER_SET_KR
+
+	.ifnc "\reg", "r9"
+		.ifnc "\clob1", "r9"
+			mov r9 = \clob1
+		.endif
+	.endif
+	.ifnc "\clob0", "r8"
+		mov r8 = \clob0
+	.endif
+.endm
+
+.macro __MOV_TO_KR kr, reg, clob0, clob1
+	.ifc "\clob0", "r9"
+		____MOV_TO_KR \kr, \reg, \clob1, \clob0
+		.exitm
+	.endif
+	.ifc "\clob1", "r8"
+		____MOV_TO_KR \kr, \reg, \clob1, \clob0
+		.exitm
+	.endif
+
+	____MOV_TO_KR \kr, \reg, \clob0, \clob1
+.endm
+
+#define MOV_TO_KR(kr, reg, clob0, clob1) \
+	__MOV_TO_KR IA64_KR_ ## kr, reg, clob0, clob1
+
+
+.macro __ITC_I pred, reg, clob
+	.ifc "\reg", "r8"
+		(\pred)	XEN_HYPER_ITC_I
+		.exitm
+	.endif
+	.ifc "\clob", "r8"
+		(\pred)	mov r8 = \reg
+		;;
+		(\pred)	XEN_HYPER_ITC_I
+		.exitm
+	.endif
+
+	(\pred)	mov \clob = r8
+	(\pred)	mov r8 = \reg
+	;;
+	(\pred)	XEN_HYPER_ITC_I
+	;;
+	(\pred)	mov r8 = \clob
+	;;
+.endm
+#define ITC_I(pred, reg, clob)	__ITC_I pred, reg, clob
+
+.macro __ITC_D pred, reg, clob
+	.ifc "\reg", "r8"
+		(\pred)	XEN_HYPER_ITC_D
+		;;
+		.exitm
+	.endif
+	.ifc "\clob", "r8"
+		(\pred)	mov r8 = \reg
+		;;
+		(\pred)	XEN_HYPER_ITC_D
+		;;
+		.exitm
+	.endif
+
+	(\pred)	mov \clob = r8
+	(\pred)	mov r8 = \reg
+	;;
+	(\pred)	XEN_HYPER_ITC_D
+	;;
+	(\pred)	mov r8 = \clob
+	;;
+.endm
+#define ITC_D(pred, reg, clob)	__ITC_D pred, reg, clob
+
+.macro __ITC_I_AND_D pred_i, pred_d, reg, clob
+	.ifc "\reg", "r8"
+		(\pred_i)XEN_HYPER_ITC_I
+		;;
+		(\pred_d)XEN_HYPER_ITC_D
+		;;
+		.exitm
+	.endif
+	.ifc "\clob", "r8"
+		mov r8 = \reg
+		;;
+		(\pred_i)XEN_HYPER_ITC_I
+		;;
+		(\pred_d)XEN_HYPER_ITC_D
+		;;
+		.exitm
+	.endif
+
+	mov \clob = r8
+	mov r8 = \reg
+	;;
+	(\pred_i)XEN_HYPER_ITC_I
+	;;
+	(\pred_d)XEN_HYPER_ITC_D
+	;;
+	mov r8 = \clob
+	;;
+.endm
+#define ITC_I_AND_D(pred_i, pred_d, reg, clob) \
+	__ITC_I_AND_D pred_i, pred_d, reg, clob
+
+.macro __THASH pred, reg0, reg1, clob
+	.ifc "\reg0", "r8"
+		(\pred)	mov r8 = \reg1
+		(\pred)	XEN_HYPER_THASH
+		.exitm
+	.endc
+	.ifc "\reg1", "r8"
+		(\pred)	XEN_HYPER_THASH
+		;;
+		(\pred)	mov \reg0 = r8
+		;;
+		.exitm
+	.endif
+	.ifc "\clob", "r8"
+		(\pred)	mov r8 = \reg1
+		(\pred)	XEN_HYPER_THASH
+		;;
+		(\pred)	mov \reg0 = r8
+		;;
+		.exitm
+	.endif
+
+	(\pred)	mov \clob = r8
+	(\pred)	mov r8 = \reg1
+	(\pred)	XEN_HYPER_THASH
+	;;
+	(\pred)	mov \reg0 = r8
+	(\pred)	mov r8 = \clob
+	;;
+.endm
+#define THASH(pred, reg0, reg1, clob) __THASH pred, reg0, reg1, clob
+
+#define SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(clob0, clob1)	\
+	mov clob0 = 1;						\
+	movl clob1 = XSI_PSR_IC;				\
+	;;							\
+	st4 [clob1] = clob0					\
+	;;
+
+#define SSM_PSR_IC_AND_SRLZ_D(clob0, clob1)	\
+	;;					\
+	srlz.d;					\
+	mov clob1 = 1;				\
+	movl clob0 = XSI_PSR_IC;		\
+	;;					\
+	st4 [clob0] = clob1
+
+#define RSM_PSR_IC(clob)	\
+	movl clob = XSI_PSR_IC;	\
+	;;			\
+	st4 [clob] = r0;	\
+	;;
+
+/* pred will be clobbered */
+#define MASK_TO_PEND_OFS    (-1)
+#define SSM_PSR_I(pred, pred_clob, clob)				\
+(pred)	movl clob = XSI_PSR_I_ADDR					\
+	;;								\
+(pred)	ld8 clob = [clob]						\
+	;;								\
+	/* if (pred) vpsr.i = 1 */					\
+	/* if (pred) (vcpu->vcpu_info->evtchn_upcall_mask)=0 */		\
+(pred)	st1 [clob] = r0, MASK_TO_PEND_OFS				\
+	;;								\
+	/* if (vcpu->vcpu_info->evtchn_upcall_pending) */		\
+(pred)	ld1 clob = [clob]						\
+	;;								\
+(pred)	cmp.ne.unc pred_clob, p0 = clob, r0				\
+	;;								\
+(pred_clob)XEN_HYPER_SSM_I	/* do areal ssm psr.i */
+
+#define RSM_PSR_I(pred, clob0, clob1)	\
+	movl clob0 = XSI_PSR_I_ADDR;	\
+	mov clob1 = 1;			\
+	;;				\
+	ld8 clob0 = [clob0];		\
+	;;				\
+(pred)	st1 [clob0] = clob1
+
+#define RSM_PSR_I_IC(clob0, clob1, clob2)		\
+	movl clob0 = XSI_PSR_I_ADDR;			\
+	movl clob1 = XSI_PSR_IC;			\
+	;;						\
+	ld8 clob0 = [clob0];				\
+	mov clob2 = 1;					\
+	;;						\
+	/* note: clears both vpsr.i and vpsr.ic! */	\
+	st1 [clob0] = clob2;				\
+	st4 [clob1] = r0;				\
+	;;
+
+#define RSM_PSR_DT		\
+	XEN_HYPER_RSM_PSR_DT
+
+#define SSM_PSR_DT_AND_SRLZ_I	\
+	XEN_HYPER_SSM_PSR_DT
+
+#define BSW_0(clob0, clob1, clob2)			\
+	;;						\
+	/* r16-r31 all now hold bank1 values */		\
+	mov clob2 = ar.unat;				\
+	movl clob0 = XSI_BANK1_R16;			\
+	movl clob1 = XSI_BANK1_R16 + 8;			\
+	;;						\
+.mem.offset 0, 0; st8.spill [clob0] = r16, 16;		\
+.mem.offset 8, 0; st8.spill [clob1] = r17, 16;		\
+	;;						\
+.mem.offset 0, 0; st8.spill [clob0] = r18, 16;		\
+.mem.offset 8, 0; st8.spill [clob1] = r19, 16;		\
+	;;						\
+.mem.offset 0, 0; st8.spill [clob0] = r20, 16;		\
+.mem.offset 8, 0; st8.spill [clob1] = r21, 16;		\
+	;;						\
+.mem.offset 0, 0; st8.spill [clob0] = r22, 16;		\
+.mem.offset 8, 0; st8.spill [clob1] = r23, 16;		\
+	;;						\
+.mem.offset 0, 0; st8.spill [clob0] = r24, 16;		\
+.mem.offset 8, 0; st8.spill [clob1] = r25, 16;		\
+	;;						\
+.mem.offset 0, 0; st8.spill [clob0] = r26, 16;		\
+.mem.offset 8, 0; st8.spill [clob1] = r27, 16;		\
+	;;						\
+.mem.offset 0, 0; st8.spill [clob0] = r28, 16;		\
+.mem.offset 8, 0; st8.spill [clob1] = r29, 16;		\
+	;;						\
+.mem.offset 0, 0; st8.spill [clob0] = r30, 16;		\
+.mem.offset 8, 0; st8.spill [clob1] = r31, 16;		\
+	;;						\
+	mov clob1 = ar.unat;				\
+	movl clob0 = XSI_B1NAT;				\
+	;;						\
+	st8 [clob0] = clob1;				\
+	mov ar.unat = clob2;				\
+	movl clob0 = XSI_BANKNUM;			\
+	;;						\
+	st4 [clob0] = r0
+
+
+	/* FIXME: THIS CODE IS NOT NaT SAFE! */
+#define XEN_BSW_1(clob)			\
+	mov clob = ar.unat;		\
+	movl r30 = XSI_B1NAT;		\
+	;;				\
+	ld8 r30 = [r30];		\
+	mov r31 = 1;			\
+	;;				\
+	mov ar.unat = r30;		\
+	movl r30 = XSI_BANKNUM;		\
+	;;				\
+	st4 [r30] = r31;		\
+	movl r30 = XSI_BANK1_R16;	\
+	movl r31 = XSI_BANK1_R16+8;	\
+	;;				\
+	ld8.fill r16 = [r30], 16;	\
+	ld8.fill r17 = [r31], 16;	\
+	;;				\
+	ld8.fill r18 = [r30], 16;	\
+	ld8.fill r19 = [r31], 16;	\
+	;;				\
+	ld8.fill r20 = [r30], 16;	\
+	ld8.fill r21 = [r31], 16;	\
+	;;				\
+	ld8.fill r22 = [r30], 16;	\
+	ld8.fill r23 = [r31], 16;	\
+	;;				\
+	ld8.fill r24 = [r30], 16;	\
+	ld8.fill r25 = [r31], 16;	\
+	;;				\
+	ld8.fill r26 = [r30], 16;	\
+	ld8.fill r27 = [r31], 16;	\
+	;;				\
+	ld8.fill r28 = [r30], 16;	\
+	ld8.fill r29 = [r31], 16;	\
+	;;				\
+	ld8.fill r30 = [r30];		\
+	ld8.fill r31 = [r31];		\
+	;;				\
+	mov ar.unat = clob
+
+#define BSW_1(clob0, clob1)	XEN_BSW_1(clob1)
+
+
+#define COVER	\
+	XEN_HYPER_COVER
+
+#define RFI			\
+	XEN_HYPER_RFI;		\
+	dv_serialize_data
diff --git a/arch/ia64/include/asm/xen/interface.h b/arch/ia64/include/asm/xen/interface.h
new file mode 100644
index 0000000..f00fab40
--- /dev/null
+++ b/arch/ia64/include/asm/xen/interface.h
@@ -0,0 +1,346 @@
+/******************************************************************************
+ * arch-ia64/hypervisor-if.h
+ *
+ * Guest OS interface to IA64 Xen.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright by those who contributed. (in alphabetical order)
+ *
+ * Anthony Xu <anthony.xu@intel.com>
+ * Eddie Dong <eddie.dong@intel.com>
+ * Fred Yang <fred.yang@intel.com>
+ * Kevin Tian <kevin.tian@intel.com>
+ * Alex Williamson <alex.williamson@hp.com>
+ * Chris Wright <chrisw@sous-sol.org>
+ * Christian Limpach <Christian.Limpach@cl.cam.ac.uk>
+ * Dietmar Hahn <dietmar.hahn@fujitsu-siemens.com>
+ * Hollis Blanchard <hollisb@us.ibm.com>
+ * Isaku Yamahata <yamahata@valinux.co.jp>
+ * Jan Beulich <jbeulich@novell.com>
+ * John Levon <john.levon@sun.com>
+ * Kazuhiro Suzuki <kaz@jp.fujitsu.com>
+ * Keir Fraser <keir.fraser@citrix.com>
+ * Kouya Shimura <kouya@jp.fujitsu.com>
+ * Masaki Kanno <kanno.masaki@jp.fujitsu.com>
+ * Matt Chapman <matthewc@hp.com>
+ * Matthew Chapman <matthewc@hp.com>
+ * Samuel Thibault <samuel.thibault@eu.citrix.com>
+ * Tomonari Horikoshi <t.horikoshi@jp.fujitsu.com>
+ * Tristan Gingold <tgingold@free.fr>
+ * Tsunehisa Doi <Doi.Tsunehisa@jp.fujitsu.com>
+ * Yutaka Ezaki <yutaka.ezaki@jp.fujitsu.com>
+ * Zhang Xin <xing.z.zhang@intel.com>
+ * Zhang xiantao <xiantao.zhang@intel.com>
+ * dan.magenheimer@hp.com
+ * ian.pratt@cl.cam.ac.uk
+ * michael.fetterman@cl.cam.ac.uk
+ */
+
+#ifndef _ASM_IA64_XEN_INTERFACE_H
+#define _ASM_IA64_XEN_INTERFACE_H
+
+#define __DEFINE_GUEST_HANDLE(name, type)	\
+	typedef struct { type *p; } __guest_handle_ ## name
+
+#define DEFINE_GUEST_HANDLE_STRUCT(name)	\
+	__DEFINE_GUEST_HANDLE(name, struct name)
+#define DEFINE_GUEST_HANDLE(name)	__DEFINE_GUEST_HANDLE(name, name)
+#define GUEST_HANDLE(name)		__guest_handle_ ## name
+#define GUEST_HANDLE_64(name)		GUEST_HANDLE(name)
+#define set_xen_guest_handle(hnd, val)	do { (hnd).p = val; } while (0)
+
+#ifndef __ASSEMBLY__
+/* Guest handles for primitive C types. */
+__DEFINE_GUEST_HANDLE(uchar, unsigned char);
+__DEFINE_GUEST_HANDLE(uint, unsigned int);
+__DEFINE_GUEST_HANDLE(ulong, unsigned long);
+__DEFINE_GUEST_HANDLE(u64, unsigned long);
+DEFINE_GUEST_HANDLE(char);
+DEFINE_GUEST_HANDLE(int);
+DEFINE_GUEST_HANDLE(long);
+DEFINE_GUEST_HANDLE(void);
+
+typedef unsigned long xen_pfn_t;
+DEFINE_GUEST_HANDLE(xen_pfn_t);
+#define PRI_xen_pfn	"lx"
+#endif
+
+/* Arch specific VIRQs definition */
+#define VIRQ_ITC	VIRQ_ARCH_0	/* V. Virtual itc timer */
+#define VIRQ_MCA_CMC	VIRQ_ARCH_1	/* MCA cmc interrupt */
+#define VIRQ_MCA_CPE	VIRQ_ARCH_2	/* MCA cpe interrupt */
+
+/* Maximum number of virtual CPUs in multi-processor guests. */
+/* keep sizeof(struct shared_page) <= PAGE_SIZE.
+ * this is checked in arch/ia64/xen/hypervisor.c. */
+#define MAX_VIRT_CPUS	64
+
+#ifndef __ASSEMBLY__
+
+#define INVALID_MFN	(~0UL)
+
+union vac {
+	unsigned long value;
+	struct {
+		int a_int:1;
+		int a_from_int_cr:1;
+		int a_to_int_cr:1;
+		int a_from_psr:1;
+		int a_from_cpuid:1;
+		int a_cover:1;
+		int a_bsw:1;
+		long reserved:57;
+	};
+};
+
+union vdc {
+	unsigned long value;
+	struct {
+		int d_vmsw:1;
+		int d_extint:1;
+		int d_ibr_dbr:1;
+		int d_pmc:1;
+		int d_to_pmd:1;
+		int d_itm:1;
+		long reserved:58;
+	};
+};
+
+struct mapped_regs {
+	union vac vac;
+	union vdc vdc;
+	unsigned long virt_env_vaddr;
+	unsigned long reserved1[29];
+	unsigned long vhpi;
+	unsigned long reserved2[95];
+	union {
+		unsigned long vgr[16];
+		unsigned long bank1_regs[16];	/* bank1 regs (r16-r31)
+						   when bank0 active */
+	};
+	union {
+		unsigned long vbgr[16];
+		unsigned long bank0_regs[16];	/* bank0 regs (r16-r31)
+						   when bank1 active */
+	};
+	unsigned long vnat;
+	unsigned long vbnat;
+	unsigned long vcpuid[5];
+	unsigned long reserved3[11];
+	unsigned long vpsr;
+	unsigned long vpr;
+	unsigned long reserved4[76];
+	union {
+		unsigned long vcr[128];
+		struct {
+			unsigned long dcr;	/* CR0 */
+			unsigned long itm;
+			unsigned long iva;
+			unsigned long rsv1[5];
+			unsigned long pta;	/* CR8 */
+			unsigned long rsv2[7];
+			unsigned long ipsr;	/* CR16 */
+			unsigned long isr;
+			unsigned long rsv3;
+			unsigned long iip;
+			unsigned long ifa;
+			unsigned long itir;
+			unsigned long iipa;
+			unsigned long ifs;
+			unsigned long iim;	/* CR24 */
+			unsigned long iha;
+			unsigned long rsv4[38];
+			unsigned long lid;	/* CR64 */
+			unsigned long ivr;
+			unsigned long tpr;
+			unsigned long eoi;
+			unsigned long irr[4];
+			unsigned long itv;	/* CR72 */
+			unsigned long pmv;
+			unsigned long cmcv;
+			unsigned long rsv5[5];
+			unsigned long lrr0;	/* CR80 */
+			unsigned long lrr1;
+			unsigned long rsv6[46];
+		};
+	};
+	union {
+		unsigned long reserved5[128];
+		struct {
+			unsigned long precover_ifs;
+			unsigned long unat;	/* not sure if this is needed
+						   until NaT arch is done */
+			int interrupt_collection_enabled; /* virtual psr.ic */
+
+			/* virtual interrupt deliverable flag is
+			 * evtchn_upcall_mask in shared info area now.
+			 * interrupt_mask_addr is the address
+			 * of evtchn_upcall_mask for current vcpu
+			 */
+			unsigned char *interrupt_mask_addr;
+			int pending_interruption;
+			unsigned char vpsr_pp;
+			unsigned char vpsr_dfh;
+			unsigned char hpsr_dfh;
+			unsigned char hpsr_mfh;
+			unsigned long reserved5_1[4];
+			int metaphysical_mode;	/* 1 = use metaphys mapping
+						   0 = use virtual */
+			int banknum;		/* 0 or 1, which virtual
+						   register bank is active */
+			unsigned long rrs[8];	/* region registers */
+			unsigned long krs[8];	/* kernel registers */
+			unsigned long tmp[16];	/* temp registers
+						   (e.g. for hyperprivops) */
+		};
+	};
+};
+
+struct arch_vcpu_info {
+	/* nothing */
+};
+
+/*
+ * This structure is used for magic page in domain pseudo physical address
+ * space and the result of XENMEM_machine_memory_map.
+ * As the XENMEM_machine_memory_map result,
+ * xen_memory_map::nr_entries indicates the size in bytes
+ * including struct xen_ia64_memmap_info. Not the number of entries.
+ */
+struct xen_ia64_memmap_info {
+	uint64_t efi_memmap_size;	/* size of EFI memory map */
+	uint64_t efi_memdesc_size;	/* size of an EFI memory map
+					 * descriptor */
+	uint32_t efi_memdesc_version;	/* memory descriptor version */
+	void *memdesc[0];		/* array of efi_memory_desc_t */
+};
+
+struct arch_shared_info {
+	/* PFN of the start_info page.	*/
+	unsigned long start_info_pfn;
+
+	/* Interrupt vector for event channel.	*/
+	int evtchn_vector;
+
+	/* PFN of memmap_info page */
+	unsigned int memmap_info_num_pages;	/* currently only = 1 case is
+						   supported. */
+	unsigned long memmap_info_pfn;
+
+	uint64_t pad[31];
+};
+
+struct xen_callback {
+	unsigned long ip;
+};
+typedef struct xen_callback xen_callback_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/* Size of the shared_info area (this is not related to page size).  */
+#define XSI_SHIFT			14
+#define XSI_SIZE			(1 << XSI_SHIFT)
+/* Log size of mapped_regs area (64 KB - only 4KB is used).  */
+#define XMAPPEDREGS_SHIFT		12
+#define XMAPPEDREGS_SIZE		(1 << XMAPPEDREGS_SHIFT)
+/* Offset of XASI (Xen arch shared info) wrt XSI_BASE.	*/
+#define XMAPPEDREGS_OFS			XSI_SIZE
+
+/* Hyperprivops.  */
+#define HYPERPRIVOP_START		0x1
+#define HYPERPRIVOP_RFI			(HYPERPRIVOP_START + 0x0)
+#define HYPERPRIVOP_RSM_DT		(HYPERPRIVOP_START + 0x1)
+#define HYPERPRIVOP_SSM_DT		(HYPERPRIVOP_START + 0x2)
+#define HYPERPRIVOP_COVER		(HYPERPRIVOP_START + 0x3)
+#define HYPERPRIVOP_ITC_D		(HYPERPRIVOP_START + 0x4)
+#define HYPERPRIVOP_ITC_I		(HYPERPRIVOP_START + 0x5)
+#define HYPERPRIVOP_SSM_I		(HYPERPRIVOP_START + 0x6)
+#define HYPERPRIVOP_GET_IVR		(HYPERPRIVOP_START + 0x7)
+#define HYPERPRIVOP_GET_TPR		(HYPERPRIVOP_START + 0x8)
+#define HYPERPRIVOP_SET_TPR		(HYPERPRIVOP_START + 0x9)
+#define HYPERPRIVOP_EOI			(HYPERPRIVOP_START + 0xa)
+#define HYPERPRIVOP_SET_ITM		(HYPERPRIVOP_START + 0xb)
+#define HYPERPRIVOP_THASH		(HYPERPRIVOP_START + 0xc)
+#define HYPERPRIVOP_PTC_GA		(HYPERPRIVOP_START + 0xd)
+#define HYPERPRIVOP_ITR_D		(HYPERPRIVOP_START + 0xe)
+#define HYPERPRIVOP_GET_RR		(HYPERPRIVOP_START + 0xf)
+#define HYPERPRIVOP_SET_RR		(HYPERPRIVOP_START + 0x10)
+#define HYPERPRIVOP_SET_KR		(HYPERPRIVOP_START + 0x11)
+#define HYPERPRIVOP_FC			(HYPERPRIVOP_START + 0x12)
+#define HYPERPRIVOP_GET_CPUID		(HYPERPRIVOP_START + 0x13)
+#define HYPERPRIVOP_GET_PMD		(HYPERPRIVOP_START + 0x14)
+#define HYPERPRIVOP_GET_EFLAG		(HYPERPRIVOP_START + 0x15)
+#define HYPERPRIVOP_SET_EFLAG		(HYPERPRIVOP_START + 0x16)
+#define HYPERPRIVOP_RSM_BE		(HYPERPRIVOP_START + 0x17)
+#define HYPERPRIVOP_GET_PSR		(HYPERPRIVOP_START + 0x18)
+#define HYPERPRIVOP_SET_RR0_TO_RR4	(HYPERPRIVOP_START + 0x19)
+#define HYPERPRIVOP_MAX			(0x1a)
+
+/* Fast and light hypercalls.  */
+#define __HYPERVISOR_ia64_fast_eoi	__HYPERVISOR_arch_1
+
+/* Xencomm macros.  */
+#define XENCOMM_INLINE_MASK		0xf800000000000000UL
+#define XENCOMM_INLINE_FLAG		0x8000000000000000UL
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Optimization features.
+ * The hypervisor may do some special optimizations for guests. This hypercall
+ * can be used to switch on/of these special optimizations.
+ */
+#define __HYPERVISOR_opt_feature	0x700UL
+
+#define XEN_IA64_OPTF_OFF		0x0
+#define XEN_IA64_OPTF_ON		0x1
+
+/*
+ * If this feature is switched on, the hypervisor inserts the
+ * tlb entries without calling the guests traphandler.
+ * This is useful in guests using region 7 for identity mapping
+ * like the linux kernel does.
+ */
+#define XEN_IA64_OPTF_IDENT_MAP_REG7	1
+
+/* Identity mapping of region 4 addresses in HVM. */
+#define XEN_IA64_OPTF_IDENT_MAP_REG4	2
+
+/* Identity mapping of region 5 addresses in HVM. */
+#define XEN_IA64_OPTF_IDENT_MAP_REG5	3
+
+#define XEN_IA64_OPTF_IDENT_MAP_NOT_SET	 (0)
+
+struct xen_ia64_opt_feature {
+	unsigned long cmd;	/* Which feature */
+	unsigned char on;	/* Switch feature on/off */
+	union {
+		struct {
+			/* The page protection bit mask of the pte.
+			 * This will be or'ed with the pte. */
+			unsigned long pgprot;
+			unsigned long key;	/* A protection key for itir.*/
+		};
+	};
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_XEN_INTERFACE_H */
diff --git a/arch/ia64/include/asm/xen/irq.h b/arch/ia64/include/asm/xen/irq.h
new file mode 100644
index 0000000..a904509
--- /dev/null
+++ b/arch/ia64/include/asm/xen/irq.h
@@ -0,0 +1,44 @@
+/******************************************************************************
+ * arch/ia64/include/asm/xen/irq.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ASM_IA64_XEN_IRQ_H
+#define _ASM_IA64_XEN_IRQ_H
+
+/*
+ * The flat IRQ space is divided into two regions:
+ *  1. A one-to-one mapping of real physical IRQs. This space is only used
+ *     if we have physical device-access privilege. This region is at the
+ *     start of the IRQ space so that existing device drivers do not need
+ *     to be modified to translate physical IRQ numbers into our IRQ space.
+ *  3. A dynamic mapping of inter-domain and Xen-sourced virtual IRQs. These
+ *     are bound using the provided bind/unbind functions.
+ */
+
+#define XEN_PIRQ_BASE		0
+#define XEN_NR_PIRQS		256
+
+#define XEN_DYNIRQ_BASE		(XEN_PIRQ_BASE + XEN_NR_PIRQS)
+#define XEN_NR_DYNIRQS		(NR_CPUS * 8)
+
+#define XEN_NR_IRQS		(XEN_NR_PIRQS + XEN_NR_DYNIRQS)
+
+#endif /* _ASM_IA64_XEN_IRQ_H */
diff --git a/arch/ia64/include/asm/xen/minstate.h b/arch/ia64/include/asm/xen/minstate.h
new file mode 100644
index 0000000..4d92d9b
--- /dev/null
+++ b/arch/ia64/include/asm/xen/minstate.h
@@ -0,0 +1,134 @@
+/*
+ * DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves
+ * the minimum state necessary that allows us to turn psr.ic back
+ * on.
+ *
+ * Assumed state upon entry:
+ *	psr.ic: off
+ *	r31:	contains saved predicates (pr)
+ *
+ * Upon exit, the state is as follows:
+ *	psr.ic: off
+ *	 r2 = points to &pt_regs.r16
+ *	 r8 = contents of ar.ccv
+ *	 r9 = contents of ar.csd
+ *	r10 = contents of ar.ssd
+ *	r11 = FPSR_DEFAULT
+ *	r12 = kernel sp (kernel virtual address)
+ *	r13 = points to current task_struct (kernel virtual address)
+ *	p15 = TRUE if psr.i is set in cr.ipsr
+ *	predicate registers (other than p2, p3, and p15), b6, r3, r14, r15:
+ *		preserved
+ * CONFIG_XEN note: p6/p7 are not preserved
+ *
+ * Note that psr.ic is NOT turned on by this macro.  This is so that
+ * we can pass interruption state as arguments to a handler.
+ */
+#define XEN_DO_SAVE_MIN(__COVER,SAVE_IFS,EXTRA,WORKAROUND)					\
+	mov r16=IA64_KR(CURRENT);	/* M */							\
+	mov r27=ar.rsc;			/* M */							\
+	mov r20=r1;			/* A */							\
+	mov r25=ar.unat;		/* M */							\
+	MOV_FROM_IPSR(p0,r29);		/* M */							\
+	MOV_FROM_IIP(r28);		/* M */							\
+	mov r21=ar.fpsr;		/* M */							\
+	mov r26=ar.pfs;			/* I */							\
+	__COVER;			/* B;; (or nothing) */					\
+	adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16;						\
+	;;											\
+	ld1 r17=[r16];				/* load current->thread.on_ustack flag */	\
+	st1 [r16]=r0;				/* clear current->thread.on_ustack flag */	\
+	adds r1=-IA64_TASK_THREAD_ON_USTACK_OFFSET,r16						\
+	/* switch from user to kernel RBS: */							\
+	;;											\
+	invala;				/* M */							\
+	/* SAVE_IFS;*/ /* see xen special handling below */					\
+	cmp.eq pKStk,pUStk=r0,r17;		/* are we in kernel mode already? */		\
+	;;											\
+(pUStk)	mov ar.rsc=0;		/* set enforced lazy mode, pl 0, little-endian, loadrs=0 */	\
+	;;											\
+(pUStk)	mov.m r24=ar.rnat;									\
+(pUStk)	addl r22=IA64_RBS_OFFSET,r1;			/* compute base of RBS */		\
+(pKStk) mov r1=sp;					/* get sp  */				\
+	;;											\
+(pUStk) lfetch.fault.excl.nt1 [r22];								\
+(pUStk)	addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1;	/* compute base of memory stack */	\
+(pUStk)	mov r23=ar.bspstore;				/* save ar.bspstore */			\
+	;;											\
+(pUStk)	mov ar.bspstore=r22;				/* switch to kernel RBS */		\
+(pKStk) addl r1=-IA64_PT_REGS_SIZE,r1;			/* if in kernel mode, use sp (r12) */	\
+	;;											\
+(pUStk)	mov r18=ar.bsp;										\
+(pUStk)	mov ar.rsc=0x3;		/* set eager mode, pl 0, little-endian, loadrs=0 */		\
+	adds r17=2*L1_CACHE_BYTES,r1;		/* really: biggest cache-line size */		\
+	adds r16=PT(CR_IPSR),r1;								\
+	;;											\
+	lfetch.fault.excl.nt1 [r17],L1_CACHE_BYTES;						\
+	st8 [r16]=r29;		/* save cr.ipsr */						\
+	;;											\
+	lfetch.fault.excl.nt1 [r17];								\
+	tbit.nz p15,p0=r29,IA64_PSR_I_BIT;							\
+	mov r29=b0										\
+	;;											\
+	WORKAROUND;										\
+	adds r16=PT(R8),r1;	/* initialize first base pointer */				\
+	adds r17=PT(R9),r1;	/* initialize second base pointer */				\
+(pKStk)	mov r18=r0;		/* make sure r18 isn't NaT */					\
+	;;											\
+.mem.offset 0,0; st8.spill [r16]=r8,16;								\
+.mem.offset 8,0; st8.spill [r17]=r9,16;								\
+        ;;											\
+.mem.offset 0,0; st8.spill [r16]=r10,24;							\
+	movl r8=XSI_PRECOVER_IFS;								\
+.mem.offset 8,0; st8.spill [r17]=r11,24;							\
+        ;;											\
+	/* xen special handling for possibly lazy cover */					\
+	/* SAVE_MIN case in dispatch_ia32_handler: mov r30=r0 */				\
+	ld8 r30=[r8];										\
+(pUStk)	sub r18=r18,r22;	/* r18=RSE.ndirty*8 */						\
+	st8 [r16]=r28,16;	/* save cr.iip */						\
+	;;											\
+	st8 [r17]=r30,16;	/* save cr.ifs */						\
+	mov r8=ar.ccv;										\
+	mov r9=ar.csd;										\
+	mov r10=ar.ssd;										\
+	movl r11=FPSR_DEFAULT;   /* L-unit */							\
+	;;											\
+	st8 [r16]=r25,16;	/* save ar.unat */						\
+	st8 [r17]=r26,16;	/* save ar.pfs */						\
+	shl r18=r18,16;		/* compute ar.rsc to be used for "loadrs" */			\
+	;;											\
+	st8 [r16]=r27,16;	/* save ar.rsc */						\
+(pUStk)	st8 [r17]=r24,16;	/* save ar.rnat */						\
+(pKStk)	adds r17=16,r17;	/* skip over ar_rnat field */					\
+	;;			/* avoid RAW on r16 & r17 */					\
+(pUStk)	st8 [r16]=r23,16;	/* save ar.bspstore */						\
+	st8 [r17]=r31,16;	/* save predicates */						\
+(pKStk)	adds r16=16,r16;	/* skip over ar_bspstore field */				\
+	;;											\
+	st8 [r16]=r29,16;	/* save b0 */							\
+	st8 [r17]=r18,16;	/* save ar.rsc value for "loadrs" */				\
+	cmp.eq pNonSys,pSys=r0,r0	/* initialize pSys=0, pNonSys=1 */			\
+	;;											\
+.mem.offset 0,0; st8.spill [r16]=r20,16;	/* save original r1 */				\
+.mem.offset 8,0; st8.spill [r17]=r12,16;							\
+	adds r12=-16,r1;	/* switch to kernel memory stack (with 16 bytes of scratch) */	\
+	;;											\
+.mem.offset 0,0; st8.spill [r16]=r13,16;							\
+.mem.offset 8,0; st8.spill [r17]=r21,16;	/* save ar.fpsr */				\
+	mov r13=IA64_KR(CURRENT);	/* establish `current' */				\
+	;;											\
+.mem.offset 0,0; st8.spill [r16]=r15,16;							\
+.mem.offset 8,0; st8.spill [r17]=r14,16;							\
+	;;											\
+.mem.offset 0,0; st8.spill [r16]=r2,16;								\
+.mem.offset 8,0; st8.spill [r17]=r3,16;								\
+	ACCOUNT_GET_STAMP									\
+	adds r2=IA64_PT_REGS_R16_OFFSET,r1;							\
+	;;											\
+	EXTRA;											\
+	movl r1=__gp;		/* establish kernel global pointer */				\
+	;;											\
+	ACCOUNT_SYS_ENTER									\
+	BSW_1(r3,r14);	/* switch back to bank 1 (must be last in insn group) */		\
+	;;
diff --git a/arch/ia64/include/asm/xen/page.h b/arch/ia64/include/asm/xen/page.h
new file mode 100644
index 0000000..03441a78
--- /dev/null
+++ b/arch/ia64/include/asm/xen/page.h
@@ -0,0 +1,65 @@
+/******************************************************************************
+ * arch/ia64/include/asm/xen/page.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ASM_IA64_XEN_PAGE_H
+#define _ASM_IA64_XEN_PAGE_H
+
+#define INVALID_P2M_ENTRY	(~0UL)
+
+static inline unsigned long mfn_to_pfn(unsigned long mfn)
+{
+	return mfn;
+}
+
+static inline unsigned long pfn_to_mfn(unsigned long pfn)
+{
+	return pfn;
+}
+
+#define phys_to_machine_mapping_valid(_x)	(1)
+
+static inline void *mfn_to_virt(unsigned long mfn)
+{
+	return __va(mfn << PAGE_SHIFT);
+}
+
+static inline unsigned long virt_to_mfn(void *virt)
+{
+	return __pa(virt) >> PAGE_SHIFT;
+}
+
+/* for tpmfront.c */
+static inline unsigned long virt_to_machine(void *virt)
+{
+	return __pa(virt);
+}
+
+static inline void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+	/* nothing */
+}
+
+#define pte_mfn(_x)	pte_pfn(_x)
+#define mfn_pte(_x, _y)	__pte_ma(0)		/* unmodified use */
+#define __pte_ma(_x)	((pte_t) {(_x)})        /* unmodified use */
+
+#endif /* _ASM_IA64_XEN_PAGE_H */
diff --git a/arch/ia64/include/asm/xen/privop.h b/arch/ia64/include/asm/xen/privop.h
new file mode 100644
index 0000000..71ec754
--- /dev/null
+++ b/arch/ia64/include/asm/xen/privop.h
@@ -0,0 +1,129 @@
+#ifndef _ASM_IA64_XEN_PRIVOP_H
+#define _ASM_IA64_XEN_PRIVOP_H
+
+/*
+ * Copyright (C) 2005 Hewlett-Packard Co
+ *	Dan Magenheimer <dan.magenheimer@hp.com>
+ *
+ * Paravirtualizations of privileged operations for Xen/ia64
+ *
+ *
+ * inline privop and paravirt_alt support
+ * Copyright (c) 2007 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>		/* arch-ia64.h requires uint64_t */
+#endif
+#include <asm/xen/interface.h>
+
+/* At 1 MB, before per-cpu space but still addressable using addl instead
+   of movl. */
+#define XSI_BASE			0xfffffffffff00000
+
+/* Address of mapped regs.  */
+#define XMAPPEDREGS_BASE		(XSI_BASE + XSI_SIZE)
+
+#ifdef __ASSEMBLY__
+#define XEN_HYPER_RFI			break HYPERPRIVOP_RFI
+#define XEN_HYPER_RSM_PSR_DT		break HYPERPRIVOP_RSM_DT
+#define XEN_HYPER_SSM_PSR_DT		break HYPERPRIVOP_SSM_DT
+#define XEN_HYPER_COVER			break HYPERPRIVOP_COVER
+#define XEN_HYPER_ITC_D			break HYPERPRIVOP_ITC_D
+#define XEN_HYPER_ITC_I			break HYPERPRIVOP_ITC_I
+#define XEN_HYPER_SSM_I			break HYPERPRIVOP_SSM_I
+#define XEN_HYPER_GET_IVR		break HYPERPRIVOP_GET_IVR
+#define XEN_HYPER_THASH			break HYPERPRIVOP_THASH
+#define XEN_HYPER_ITR_D			break HYPERPRIVOP_ITR_D
+#define XEN_HYPER_SET_KR		break HYPERPRIVOP_SET_KR
+#define XEN_HYPER_GET_PSR		break HYPERPRIVOP_GET_PSR
+#define XEN_HYPER_SET_RR0_TO_RR4	break HYPERPRIVOP_SET_RR0_TO_RR4
+
+#define XSI_IFS				(XSI_BASE + XSI_IFS_OFS)
+#define XSI_PRECOVER_IFS		(XSI_BASE + XSI_PRECOVER_IFS_OFS)
+#define XSI_IFA				(XSI_BASE + XSI_IFA_OFS)
+#define XSI_ISR				(XSI_BASE + XSI_ISR_OFS)
+#define XSI_IIM				(XSI_BASE + XSI_IIM_OFS)
+#define XSI_ITIR			(XSI_BASE + XSI_ITIR_OFS)
+#define XSI_PSR_I_ADDR			(XSI_BASE + XSI_PSR_I_ADDR_OFS)
+#define XSI_PSR_IC			(XSI_BASE + XSI_PSR_IC_OFS)
+#define XSI_IPSR			(XSI_BASE + XSI_IPSR_OFS)
+#define XSI_IIP				(XSI_BASE + XSI_IIP_OFS)
+#define XSI_B1NAT			(XSI_BASE + XSI_B1NATS_OFS)
+#define XSI_BANK1_R16			(XSI_BASE + XSI_BANK1_R16_OFS)
+#define XSI_BANKNUM			(XSI_BASE + XSI_BANKNUM_OFS)
+#define XSI_IHA				(XSI_BASE + XSI_IHA_OFS)
+#endif
+
+#ifndef __ASSEMBLY__
+
+/************************************************/
+/* Instructions paravirtualized for correctness */
+/************************************************/
+
+/* "fc" and "thash" are privilege-sensitive instructions, meaning they
+ *  may have different semantics depending on whether they are executed
+ *  at PL0 vs PL!=0.  When paravirtualized, these instructions mustn't
+ *  be allowed to execute directly, lest incorrect semantics result. */
+extern void xen_fc(unsigned long addr);
+extern unsigned long xen_thash(unsigned long addr);
+
+/* Note that "ttag" and "cover" are also privilege-sensitive; "ttag"
+ * is not currently used (though it may be in a long-format VHPT system!)
+ * and the semantics of cover only change if psr.ic is off which is very
+ * rare (and currently non-existent outside of assembly code */
+
+/* There are also privilege-sensitive registers.  These registers are
+ * readable at any privilege level but only writable at PL0. */
+extern unsigned long xen_get_cpuid(int index);
+extern unsigned long xen_get_pmd(int index);
+
+extern unsigned long xen_get_eflag(void);	/* see xen_ia64_getreg */
+extern void xen_set_eflag(unsigned long);	/* see xen_ia64_setreg */
+
+/************************************************/
+/* Instructions paravirtualized for performance */
+/************************************************/
+
+/* Xen uses memory-mapped virtual privileged registers for access to many
+ * performance-sensitive privileged registers.  Some, like the processor
+ * status register (psr), are broken up into multiple memory locations.
+ * Others, like "pend", are abstractions based on privileged registers.
+ * "Pend" is guaranteed to be set if reading cr.ivr would return a
+ * (non-spurious) interrupt. */
+#define XEN_MAPPEDREGS ((struct mapped_regs *)XMAPPEDREGS_BASE)
+
+#define XSI_PSR_I			\
+	(*XEN_MAPPEDREGS->interrupt_mask_addr)
+#define xen_get_virtual_psr_i()		\
+	(!XSI_PSR_I)
+#define xen_set_virtual_psr_i(_val)	\
+	({ XSI_PSR_I = (uint8_t)(_val) ? 0 : 1; })
+#define xen_set_virtual_psr_ic(_val)	\
+	({ XEN_MAPPEDREGS->interrupt_collection_enabled = _val ? 1 : 0; })
+#define xen_get_virtual_pend()		\
+	(*(((uint8_t *)XEN_MAPPEDREGS->interrupt_mask_addr) - 1))
+
+/* Although all privileged operations can be left to trap and will
+ * be properly handled by Xen, some are frequent enough that we use
+ * hyperprivops for performance. */
+extern unsigned long xen_get_psr(void);
+extern unsigned long xen_get_ivr(void);
+extern unsigned long xen_get_tpr(void);
+extern void xen_hyper_ssm_i(void);
+extern void xen_set_itm(unsigned long);
+extern void xen_set_tpr(unsigned long);
+extern void xen_eoi(unsigned long);
+extern unsigned long xen_get_rr(unsigned long index);
+extern void xen_set_rr(unsigned long index, unsigned long val);
+extern void xen_set_rr0_to_rr4(unsigned long val0, unsigned long val1,
+			       unsigned long val2, unsigned long val3,
+			       unsigned long val4);
+extern void xen_set_kr(unsigned long index, unsigned long val);
+extern void xen_ptcga(unsigned long addr, unsigned long size);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_XEN_PRIVOP_H */
diff --git a/arch/ia64/include/asm/xen/xcom_hcall.h b/arch/ia64/include/asm/xen/xcom_hcall.h
new file mode 100644
index 0000000..20b2950c
--- /dev/null
+++ b/arch/ia64/include/asm/xen/xcom_hcall.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2006 Tristan Gingold <tristan.gingold@bull.net>, Bull SAS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_IA64_XEN_XCOM_HCALL_H
+#define _ASM_IA64_XEN_XCOM_HCALL_H
+
+/* These function creates inline or mini descriptor for the parameters and
+   calls the corresponding xencomm_arch_hypercall_X.
+   Architectures should defines HYPERVISOR_xxx as xencomm_hypercall_xxx unless
+   they want to use their own wrapper.  */
+extern int xencomm_hypercall_console_io(int cmd, int count, char *str);
+
+extern int xencomm_hypercall_event_channel_op(int cmd, void *op);
+
+extern int xencomm_hypercall_xen_version(int cmd, void *arg);
+
+extern int xencomm_hypercall_physdev_op(int cmd, void *op);
+
+extern int xencomm_hypercall_grant_table_op(unsigned int cmd, void *op,
+					    unsigned int count);
+
+extern int xencomm_hypercall_sched_op(int cmd, void *arg);
+
+extern int xencomm_hypercall_multicall(void *call_list, int nr_calls);
+
+extern int xencomm_hypercall_callback_op(int cmd, void *arg);
+
+extern int xencomm_hypercall_memory_op(unsigned int cmd, void *arg);
+
+extern int xencomm_hypercall_suspend(unsigned long srec);
+
+extern long xencomm_hypercall_vcpu_op(int cmd, int cpu, void *arg);
+
+extern long xencomm_hypercall_opt_feature(void *arg);
+
+#endif /* _ASM_IA64_XEN_XCOM_HCALL_H */
diff --git a/arch/ia64/include/asm/xen/xencomm.h b/arch/ia64/include/asm/xen/xencomm.h
new file mode 100644
index 0000000..cded677
--- /dev/null
+++ b/arch/ia64/include/asm/xen/xencomm.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2006 Hollis Blanchard <hollisb@us.ibm.com>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_IA64_XEN_XENCOMM_H
+#define _ASM_IA64_XEN_XENCOMM_H
+
+#include <xen/xencomm.h>
+#include <asm/pgtable.h>
+
+/* Must be called before any hypercall.  */
+extern void xencomm_initialize(void);
+extern int xencomm_is_initialized(void);
+
+/* Check if virtual contiguity means physical contiguity
+ * where the passed address is a pointer value in virtual address.
+ * On ia64, identity mapping area in region 7 or the piece of region 5
+ * that is mapped by itr[IA64_TR_KERNEL]/dtr[IA64_TR_KERNEL]
+ */
+static inline int xencomm_is_phys_contiguous(unsigned long addr)
+{
+	return (PAGE_OFFSET <= addr &&
+		addr < (PAGE_OFFSET + (1UL << IA64_MAX_PHYS_BITS))) ||
+		(KERNEL_START <= addr &&
+		 addr < KERNEL_START + KERNEL_TR_PAGE_SIZE);
+}
+
+#endif /* _ASM_IA64_XEN_XENCOMM_H */
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 87fea11..c381ea9 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -42,6 +42,10 @@
 ifneq ($(CONFIG_IA64_ESI),)
 obj-y				+= esi_stub.o	# must be in kernel proper
 endif
+obj-$(CONFIG_DMAR)		+= pci-dma.o
+ifeq ($(CONFIG_DMAR), y)
+obj-$(CONFIG_SWIOTLB)		+= pci-swiotlb.o
+endif
 
 # The gate DSO image is built using a special linker script.
 targets += gate.so gate-syms.o
@@ -112,5 +116,23 @@
 ASM_PARAVIRT_OBJS = ivt.o entry.o
 define paravirtualized_native
 AFLAGS_$(1) += -D__IA64_ASM_PARAVIRTUALIZED_NATIVE
+AFLAGS_pvchk-sed-$(1) += -D__IA64_ASM_PARAVIRTUALIZED_PVCHECK
+extra-y += pvchk-$(1)
 endef
 $(foreach obj,$(ASM_PARAVIRT_OBJS),$(eval $(call paravirtualized_native,$(obj))))
+
+#
+# Checker for paravirtualizations of privileged operations.
+#
+quiet_cmd_pv_check_sed = PVCHK   $@
+define cmd_pv_check_sed
+	sed -f $(srctree)/arch/$(SRCARCH)/scripts/pvcheck.sed $< > $@
+endef
+
+$(obj)/pvchk-sed-%.s: $(src)/%.S $(srctree)/arch/$(SRCARCH)/scripts/pvcheck.sed FORCE
+	$(call if_changed_dep,as_s_S)
+$(obj)/pvchk-%.s: $(obj)/pvchk-sed-%.s FORCE
+	$(call if_changed,pv_check_sed)
+$(obj)/pvchk-%.o: $(obj)/pvchk-%.s FORCE
+	$(call if_changed,as_o_S)
+.PRECIOUS: $(obj)/pvchk-sed-%.s $(obj)/pvchk-%.s $(obj)/pvchk-%.o
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 5d1eb7e..0635015 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -52,6 +52,7 @@
 #include <asm/numa.h>
 #include <asm/sal.h>
 #include <asm/cyclone.h>
+#include <asm/xen/hypervisor.h>
 
 #define BAD_MADT_ENTRY(entry, end) (                                        \
 		(!entry) || (unsigned long)entry + sizeof(*entry) > end ||  \
@@ -91,6 +92,9 @@
 	struct acpi_table_rsdp *rsdp;
 	struct acpi_table_xsdt *xsdt;
 	struct acpi_table_header *hdr;
+#ifdef CONFIG_DMAR
+	u64 i, nentries;
+#endif
 
 	rsdp_phys = acpi_find_rsdp();
 	if (!rsdp_phys) {
@@ -121,8 +125,22 @@
 			return "uv";
 		else
 			return "sn2";
+	} else if (xen_pv_domain() && !strcmp(hdr->oem_id, "XEN")) {
+		return "xen";
 	}
 
+#ifdef CONFIG_DMAR
+	/* Look for Intel IOMMU */
+	nentries = (hdr->length - sizeof(*hdr)) /
+			 sizeof(xsdt->table_offset_entry[0]);
+	for (i = 0; i < nentries; i++) {
+		hdr = __va(xsdt->table_offset_entry[i]);
+		if (strncmp(hdr->signature, ACPI_SIG_DMAR,
+			sizeof(ACPI_SIG_DMAR) - 1) == 0)
+			return "dig_vtd";
+	}
+#endif
+
 	return "dig";
 #else
 # if defined (CONFIG_IA64_HP_SIM)
@@ -137,6 +155,10 @@
 	return "uv";
 # elif defined (CONFIG_IA64_DIG)
 	return "dig";
+# elif defined (CONFIG_IA64_XEN_GUEST)
+	return "xen";
+# elif defined(CONFIG_IA64_DIG_VTD)
+	return "dig_vtd";
 # else
 #	error Unknown platform.  Fix acpi.c.
 # endif
diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c
index 94c44b1..742dbb1 100644
--- a/arch/ia64/kernel/asm-offsets.c
+++ b/arch/ia64/kernel/asm-offsets.c
@@ -16,6 +16,9 @@
 #include <asm/sigcontext.h>
 #include <asm/mca.h>
 
+#include <asm/xen/interface.h>
+#include <asm/xen/hypervisor.h>
+
 #include "../kernel/sigframe.h"
 #include "../kernel/fsyscall_gtod_data.h"
 
@@ -286,4 +289,32 @@
 		offsetof (struct itc_jitter_data_t, itc_jitter));
 	DEFINE(IA64_ITC_LASTCYCLE_OFFSET,
 		offsetof (struct itc_jitter_data_t, itc_lastcycle));
+
+#ifdef CONFIG_XEN
+	BLANK();
+
+	DEFINE(XEN_NATIVE_ASM, XEN_NATIVE);
+	DEFINE(XEN_PV_DOMAIN_ASM, XEN_PV_DOMAIN);
+
+#define DEFINE_MAPPED_REG_OFS(sym, field) \
+	DEFINE(sym, (XMAPPEDREGS_OFS + offsetof(struct mapped_regs, field)))
+
+	DEFINE_MAPPED_REG_OFS(XSI_PSR_I_ADDR_OFS, interrupt_mask_addr);
+	DEFINE_MAPPED_REG_OFS(XSI_IPSR_OFS, ipsr);
+	DEFINE_MAPPED_REG_OFS(XSI_IIP_OFS, iip);
+	DEFINE_MAPPED_REG_OFS(XSI_IFS_OFS, ifs);
+	DEFINE_MAPPED_REG_OFS(XSI_PRECOVER_IFS_OFS, precover_ifs);
+	DEFINE_MAPPED_REG_OFS(XSI_ISR_OFS, isr);
+	DEFINE_MAPPED_REG_OFS(XSI_IFA_OFS, ifa);
+	DEFINE_MAPPED_REG_OFS(XSI_IIPA_OFS, iipa);
+	DEFINE_MAPPED_REG_OFS(XSI_IIM_OFS, iim);
+	DEFINE_MAPPED_REG_OFS(XSI_IHA_OFS, iha);
+	DEFINE_MAPPED_REG_OFS(XSI_ITIR_OFS, itir);
+	DEFINE_MAPPED_REG_OFS(XSI_PSR_IC_OFS, interrupt_collection_enabled);
+	DEFINE_MAPPED_REG_OFS(XSI_BANKNUM_OFS, banknum);
+	DEFINE_MAPPED_REG_OFS(XSI_BANK0_R16_OFS, bank0_regs[0]);
+	DEFINE_MAPPED_REG_OFS(XSI_BANK1_R16_OFS, bank1_regs[0]);
+	DEFINE_MAPPED_REG_OFS(XSI_B0NATS_OFS, vbnat);
+	DEFINE_MAPPED_REG_OFS(XSI_B1NATS_OFS, vnat);
+#endif /* CONFIG_XEN */
 }
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 0dd6c14..7ef0c59 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -534,6 +534,11 @@
  	stf.spill [r16]=f10
  	stf.spill [r17]=f11
 	br.call.sptk.many rp=syscall_trace_enter // give parent a chance to catch syscall args
+	cmp.lt p6,p0=r8,r0			// check tracehook
+	adds r2=PT(R8)+16,sp			// r2 = &pt_regs.r8
+	adds r3=PT(R10)+16,sp			// r3 = &pt_regs.r10
+	mov r10=0
+(p6)	br.cond.sptk strace_error		// syscall failed ->
 	adds r16=PT(F6)+16,sp
 	adds r17=PT(F7)+16,sp
 	;;
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 416a952..f675d8e3 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -580,7 +580,7 @@
 	mov b0=r29				// restore b0
 	;;
 	st8 [r17]=r18				// store back updated PTE
-	itc.d r18				// install updated PTE
+	ITC_D(p0, r18, r16)			// install updated PTE
 #endif
 	mov pr=r31,-1				// restore pr
 	RFI
@@ -646,7 +646,7 @@
 	mov b0=r29				// restore b0
 	;;
 	st8 [r17]=r18				// store back updated PTE
-	itc.i r18				// install updated PTE
+	ITC_I(p0, r18, r16)			// install updated PTE
 #endif /* !CONFIG_SMP */
 	mov pr=r31,-1
 	RFI
@@ -698,7 +698,7 @@
 	or r18=_PAGE_A,r18			// set the accessed bit
 	;;
 	st8 [r17]=r18				// store back updated PTE
-	itc.d r18				// install updated PTE
+	ITC_D(p0, r18, r16)			// install updated PTE
 #endif
 	mov b0=r29				// restore b0
 	mov pr=r31,-1
diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 60c6ef6..702a09c 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -5,6 +5,7 @@
 #include <linux/pci.h>
 #include <linux/irq.h>
 #include <linux/msi.h>
+#include <linux/dmar.h>
 #include <asm/smp.h>
 
 /*
@@ -162,3 +163,82 @@
 
 	return ia64_teardown_msi_irq(irq);
 }
+
+#ifdef CONFIG_DMAR
+#ifdef CONFIG_SMP
+static void dmar_msi_set_affinity(unsigned int irq, cpumask_t mask)
+{
+	struct irq_cfg *cfg = irq_cfg + irq;
+	struct msi_msg msg;
+	int cpu = first_cpu(mask);
+
+
+	if (!cpu_online(cpu))
+		return;
+
+	if (irq_prepare_move(irq, cpu))
+		return;
+
+	dmar_msi_read(irq, &msg);
+
+	msg.data &= ~MSI_DATA_VECTOR_MASK;
+	msg.data |= MSI_DATA_VECTOR(cfg->vector);
+	msg.address_lo &= ~MSI_ADDR_DESTID_MASK;
+	msg.address_lo |= MSI_ADDR_DESTID_CPU(cpu_physical_id(cpu));
+
+	dmar_msi_write(irq, &msg);
+	irq_desc[irq].affinity = mask;
+}
+#endif /* CONFIG_SMP */
+
+struct irq_chip dmar_msi_type = {
+	.name = "DMAR_MSI",
+	.unmask = dmar_msi_unmask,
+	.mask = dmar_msi_mask,
+	.ack = ia64_ack_msi_irq,
+#ifdef CONFIG_SMP
+	.set_affinity = dmar_msi_set_affinity,
+#endif
+	.retrigger = ia64_msi_retrigger_irq,
+};
+
+static int
+msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
+{
+	struct irq_cfg *cfg = irq_cfg + irq;
+	unsigned dest;
+	cpumask_t mask;
+
+	cpus_and(mask, irq_to_domain(irq), cpu_online_map);
+	dest = cpu_physical_id(first_cpu(mask));
+
+	msg->address_hi = 0;
+	msg->address_lo =
+		MSI_ADDR_HEADER |
+		MSI_ADDR_DESTMODE_PHYS |
+		MSI_ADDR_REDIRECTION_CPU |
+		MSI_ADDR_DESTID_CPU(dest);
+
+	msg->data =
+		MSI_DATA_TRIGGER_EDGE |
+		MSI_DATA_LEVEL_ASSERT |
+		MSI_DATA_DELIVERY_FIXED |
+		MSI_DATA_VECTOR(cfg->vector);
+	return 0;
+}
+
+int arch_setup_dmar_msi(unsigned int irq)
+{
+	int ret;
+	struct msi_msg msg;
+
+	ret = msi_compose_msg(NULL, irq, &msg);
+	if (ret < 0)
+		return ret;
+	dmar_msi_write(irq, &msg);
+	set_irq_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq,
+		"edge");
+	return 0;
+}
+#endif /* CONFIG_DMAR */
+
diff --git a/arch/ia64/kernel/nr-irqs.c b/arch/ia64/kernel/nr-irqs.c
index 8273afc..ee56457 100644
--- a/arch/ia64/kernel/nr-irqs.c
+++ b/arch/ia64/kernel/nr-irqs.c
@@ -10,6 +10,7 @@
 #include <linux/kbuild.h>
 #include <linux/threads.h>
 #include <asm/native/irq.h>
+#include <asm/xen/irq.h>
 
 void foo(void)
 {
diff --git a/arch/ia64/kernel/paravirt.c b/arch/ia64/kernel/paravirt.c
index afaf5b9..de35d8e 100644
--- a/arch/ia64/kernel/paravirt.c
+++ b/arch/ia64/kernel/paravirt.c
@@ -332,7 +332,7 @@
 
 struct pv_iosapic_ops pv_iosapic_ops = {
 	.pcat_compat_init = ia64_native_iosapic_pcat_compat_init,
-	.get_irq_chip = ia64_native_iosapic_get_irq_chip,
+	.__get_irq_chip = ia64_native_iosapic_get_irq_chip,
 
 	.__read = ia64_native_iosapic_read,
 	.__write = ia64_native_iosapic_write,
diff --git a/arch/ia64/kernel/paravirt_inst.h b/arch/ia64/kernel/paravirt_inst.h
index 5cad6fb..64d6d81 100644
--- a/arch/ia64/kernel/paravirt_inst.h
+++ b/arch/ia64/kernel/paravirt_inst.h
@@ -20,7 +20,9 @@
  *
  */
 
-#ifdef __IA64_ASM_PARAVIRTUALIZED_XEN
+#ifdef __IA64_ASM_PARAVIRTUALIZED_PVCHECK
+#include <asm/native/pvchk_inst.h>
+#elif defined(__IA64_ASM_PARAVIRTUALIZED_XEN)
 #include <asm/xen/inst.h>
 #include <asm/xen/minstate.h>
 #else
diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c
new file mode 100644
index 0000000..10a75b5
--- /dev/null
+++ b/arch/ia64/kernel/pci-dma.c
@@ -0,0 +1,129 @@
+/*
+ * Dynamic DMA mapping support.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/dmar.h>
+#include <asm/iommu.h>
+#include <asm/machvec.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/machvec.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_DMAR
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+
+#include <asm/page.h>
+#include <asm/iommu.h>
+
+dma_addr_t bad_dma_address __read_mostly;
+EXPORT_SYMBOL(bad_dma_address);
+
+static int iommu_sac_force __read_mostly;
+
+int no_iommu __read_mostly;
+#ifdef CONFIG_IOMMU_DEBUG
+int force_iommu __read_mostly = 1;
+#else
+int force_iommu __read_mostly;
+#endif
+
+/* Set this to 1 if there is a HW IOMMU in the system */
+int iommu_detected __read_mostly;
+
+/* Dummy device used for NULL arguments (normally ISA). Better would
+   be probably a smaller DMA mask, but this is bug-to-bug compatible
+   to i386. */
+struct device fallback_dev = {
+	.bus_id = "fallback device",
+	.coherent_dma_mask = DMA_32BIT_MASK,
+	.dma_mask = &fallback_dev.coherent_dma_mask,
+};
+
+void __init pci_iommu_alloc(void)
+{
+	/*
+	 * The order of these functions is important for
+	 * fall-back/fail-over reasons
+	 */
+	detect_intel_iommu();
+
+#ifdef CONFIG_SWIOTLB
+	pci_swiotlb_init();
+#endif
+}
+
+static int __init pci_iommu_init(void)
+{
+	if (iommu_detected)
+		intel_iommu_init();
+
+	return 0;
+}
+
+/* Must execute after PCI subsystem */
+fs_initcall(pci_iommu_init);
+
+void pci_iommu_shutdown(void)
+{
+	return;
+}
+
+void __init
+iommu_dma_init(void)
+{
+	return;
+}
+
+struct dma_mapping_ops *dma_ops;
+EXPORT_SYMBOL(dma_ops);
+
+int iommu_dma_supported(struct device *dev, u64 mask)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
+#ifdef CONFIG_PCI
+	if (mask > 0xffffffff && forbid_dac > 0) {
+		dev_info(dev, "Disallowing DAC for device\n");
+		return 0;
+	}
+#endif
+
+	if (ops->dma_supported_op)
+		return ops->dma_supported_op(dev, mask);
+
+	/* Copied from i386. Doesn't make much sense, because it will
+	   only work for pci_alloc_coherent.
+	   The caller just has to use GFP_DMA in this case. */
+	if (mask < DMA_24BIT_MASK)
+		return 0;
+
+	/* Tell the device to use SAC when IOMMU force is on.  This
+	   allows the driver to use cheaper accesses in some cases.
+
+	   Problem with this is that if we overflow the IOMMU area and
+	   return DAC as fallback address the device may not handle it
+	   correctly.
+
+	   As a special case some controllers have a 39bit address
+	   mode that is as efficient as 32bit (aic79xx). Don't force
+	   SAC for these.  Assume all masks <= 40 bits are of this
+	   type. Normally this doesn't make any difference, but gives
+	   more gentle handling of IOMMU overflow. */
+	if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) {
+		dev_info(dev, "Force SAC with mask %lx\n", mask);
+		return 0;
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL(iommu_dma_supported);
+
+#endif
diff --git a/arch/ia64/kernel/pci-swiotlb.c b/arch/ia64/kernel/pci-swiotlb.c
new file mode 100644
index 0000000..16c5051
--- /dev/null
+++ b/arch/ia64/kernel/pci-swiotlb.c
@@ -0,0 +1,46 @@
+/* Glue code to lib/swiotlb.c */
+
+#include <linux/pci.h>
+#include <linux/cache.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/swiotlb.h>
+#include <asm/dma.h>
+#include <asm/iommu.h>
+#include <asm/machvec.h>
+
+int swiotlb __read_mostly;
+EXPORT_SYMBOL(swiotlb);
+
+struct dma_mapping_ops swiotlb_dma_ops = {
+	.mapping_error = swiotlb_dma_mapping_error,
+	.alloc_coherent = swiotlb_alloc_coherent,
+	.free_coherent = swiotlb_free_coherent,
+	.map_single = swiotlb_map_single,
+	.unmap_single = swiotlb_unmap_single,
+	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
+	.sync_single_for_device = swiotlb_sync_single_for_device,
+	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
+	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
+	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+	.sync_sg_for_device = swiotlb_sync_sg_for_device,
+	.map_sg = swiotlb_map_sg,
+	.unmap_sg = swiotlb_unmap_sg,
+	.dma_supported_op = swiotlb_dma_supported,
+};
+
+void __init pci_swiotlb_init(void)
+{
+	if (!iommu_detected) {
+#ifdef CONFIG_IA64_GENERIC
+		swiotlb = 1;
+		printk(KERN_INFO "PCI-DMA: Re-initialize machine vector.\n");
+		machvec_init("dig");
+		swiotlb_init();
+		dma_ops = &swiotlb_dma_ops;
+#else
+		panic("Unable to find Intel IOMMU");
+#endif
+	}
+}
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index fc8f350..ada4605 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -40,6 +40,7 @@
 #include <linux/capability.h>
 #include <linux/rcupdate.h>
 #include <linux/completion.h>
+#include <linux/tracehook.h>
 
 #include <asm/errno.h>
 #include <asm/intrinsics.h>
@@ -3684,7 +3685,7 @@
 
 		PFM_SET_WORK_PENDING(task, 1);
 
-		tsk_set_notify_resume(task);
+		set_notify_resume(task);
 
 		/*
 		 * XXX: send reschedule if task runs on another CPU
@@ -5044,8 +5045,6 @@
 
 	PFM_SET_WORK_PENDING(current, 0);
 
-	tsk_clear_notify_resume(current);
-
 	regs = task_pt_regs(current);
 
 	/*
@@ -5414,7 +5413,7 @@
 			 * when coming from ctxsw, current still points to the
 			 * previous task, therefore we must work with task and not current.
 			 */
-			tsk_set_notify_resume(task);
+			set_notify_resume(task);
 		}
 		/*
 		 * defer until state is changed (shorten spin window). the context is locked
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 3ab8373..c571627 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 #include <linux/kdebug.h>
 #include <linux/utsname.h>
+#include <linux/tracehook.h>
 
 #include <asm/cpu.h>
 #include <asm/delay.h>
@@ -160,21 +161,6 @@
 		show_stack(NULL, NULL);
 }
 
-void tsk_clear_notify_resume(struct task_struct *tsk)
-{
-#ifdef CONFIG_PERFMON
-	if (tsk->thread.pfm_needs_checking)
-		return;
-#endif
-	if (test_ti_thread_flag(task_thread_info(tsk), TIF_RESTORE_RSE))
-		return;
-	clear_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME);
-}
-
-/*
- * do_notify_resume_user():
- *	Called from notify_resume_user at entry.S, with interrupts disabled.
- */
 void
 do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall)
 {
@@ -203,6 +189,11 @@
 		ia64_do_signal(scr, in_syscall);
 	}
 
+	if (test_thread_flag(TIF_NOTIFY_RESUME)) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(&scr->pt);
+	}
+
 	/* copy user rbs to kernel rbs */
 	if (unlikely(test_thread_flag(TIF_RESTORE_RSE))) {
 		local_irq_enable();	/* force interrupt enable */
@@ -251,7 +242,6 @@
 /* We don't actually take CPU down, just spin without interrupts. */
 static inline void play_dead(void)
 {
-	extern void ia64_cpu_local_tick (void);
 	unsigned int this_cpu = smp_processor_id();
 
 	/* Ack it */
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 2a9943b..92c9689 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -22,6 +22,7 @@
 #include <linux/signal.h>
 #include <linux/regset.h>
 #include <linux/elf.h>
+#include <linux/tracehook.h>
 
 #include <asm/pgtable.h>
 #include <asm/processor.h>
@@ -603,7 +604,7 @@
 {
 	if (test_and_set_tsk_thread_flag(current, TIF_RESTORE_RSE))
 		return;
-	tsk_set_notify_resume(current);
+	set_notify_resume(current);
 	unw_init_running(do_sync_rbs, ia64_sync_user_rbs);
 }
 
@@ -613,7 +614,6 @@
 void ia64_sync_krbs(void)
 {
 	clear_tsk_thread_flag(current, TIF_RESTORE_RSE);
-	tsk_clear_notify_resume(current);
 
 	unw_init_running(do_sync_rbs, ia64_sync_kernel_rbs);
 }
@@ -644,7 +644,7 @@
 		spin_lock_irq(&child->sighand->siglock);
 		if (child->state == TASK_STOPPED &&
 		    !test_and_set_tsk_thread_flag(child, TIF_RESTORE_RSE)) {
-			tsk_set_notify_resume(child);
+			set_notify_resume(child);
 
 			child->state = TASK_TRACED;
 			stopped = 1;
@@ -1232,37 +1232,16 @@
 }
 
 
-static void
-syscall_trace (void)
-{
-	/*
-	 * The 0x80 provides a way for the tracing parent to
-	 * distinguish between a syscall stop and SIGTRAP delivery.
-	 */
-	ptrace_notify(SIGTRAP
-		      | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0));
-
-	/*
-	 * This isn't the same as continuing with a signal, but it
-	 * will do for normal use.  strace only continues with a
-	 * signal if the stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
-
 /* "asmlinkage" so the input arguments are preserved... */
 
-asmlinkage void
+asmlinkage long
 syscall_trace_enter (long arg0, long arg1, long arg2, long arg3,
 		     long arg4, long arg5, long arg6, long arg7,
 		     struct pt_regs regs)
 {
-	if (test_thread_flag(TIF_SYSCALL_TRACE) 
-	    && (current->ptrace & PT_PTRACED))
-		syscall_trace();
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		if (tracehook_report_syscall_entry(&regs))
+			return -ENOSYS;
 
 	/* copy user rbs to kernel rbs */
 	if (test_thread_flag(TIF_RESTORE_RSE))
@@ -1283,6 +1262,7 @@
 		audit_syscall_entry(arch, syscall, arg0, arg1, arg2, arg3);
 	}
 
+	return 0;
 }
 
 /* "asmlinkage" so the input arguments are preserved... */
@@ -1292,6 +1272,8 @@
 		     long arg4, long arg5, long arg6, long arg7,
 		     struct pt_regs regs)
 {
+	int step;
+
 	if (unlikely(current->audit_context)) {
 		int success = AUDITSC_RESULT(regs.r10);
 		long result = regs.r8;
@@ -1301,10 +1283,9 @@
 		audit_syscall_exit(success, result);
 	}
 
-	if ((test_thread_flag(TIF_SYSCALL_TRACE)
-	    || test_thread_flag(TIF_SINGLESTEP))
-	    && (current->ptrace & PT_PTRACED))
-		syscall_trace();
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(&regs, step);
 
 	/* copy user rbs to kernel rbs */
 	if (test_thread_flag(TIF_RESTORE_RSE))
@@ -1940,7 +1921,7 @@
 {
 	if (test_and_set_tsk_thread_flag(target, TIF_RESTORE_RSE))
 		return 0;
-	tsk_set_notify_resume(target);
+	set_notify_resume(target);
 	return do_regset_call(do_gpregs_writeback, target, regset, 0, 0,
 		NULL, NULL);
 }
@@ -2199,3 +2180,68 @@
 #endif
 	return &user_ia64_view;
 }
+
+struct syscall_get_set_args {
+	unsigned int i;
+	unsigned int n;
+	unsigned long *args;
+	struct pt_regs *regs;
+	int rw;
+};
+
+static void syscall_get_set_args_cb(struct unw_frame_info *info, void *data)
+{
+	struct syscall_get_set_args *args = data;
+	struct pt_regs *pt = args->regs;
+	unsigned long *krbs, cfm, ndirty;
+	int i, count;
+
+	if (unw_unwind_to_user(info) < 0)
+		return;
+
+	cfm = pt->cr_ifs;
+	krbs = (unsigned long *)info->task + IA64_RBS_OFFSET/8;
+	ndirty = ia64_rse_num_regs(krbs, krbs + (pt->loadrs >> 19));
+
+	count = 0;
+	if (in_syscall(pt))
+		count = min_t(int, args->n, cfm & 0x7f);
+
+	for (i = 0; i < count; i++) {
+		if (args->rw)
+			*ia64_rse_skip_regs(krbs, ndirty + i + args->i) =
+				args->args[i];
+		else
+			args->args[i] = *ia64_rse_skip_regs(krbs,
+				ndirty + i + args->i);
+	}
+
+	if (!args->rw) {
+		while (i < args->n) {
+			args->args[i] = 0;
+			i++;
+		}
+	}
+}
+
+void ia64_syscall_get_set_arguments(struct task_struct *task,
+	struct pt_regs *regs, unsigned int i, unsigned int n,
+	unsigned long *args, int rw)
+{
+	struct syscall_get_set_args data = {
+		.i = i,
+		.n = n,
+		.args = args,
+		.regs = regs,
+		.rw = rw,
+	};
+
+	if (task == current)
+		unw_init_running(syscall_get_set_args_cb, &data);
+	else {
+		struct unw_frame_info ufi;
+		memset(&ufi, 0, sizeof(ufi));
+		unw_init_from_blocked_task(&ufi, task);
+		syscall_get_set_args_cb(&ufi, &data);
+	}
+}
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 916ba89..ae79117 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -116,6 +116,13 @@
  */
 #define	I_CACHE_STRIDE_SHIFT	5	/* Safest way to go: 32 bytes by 32 bytes */
 unsigned long ia64_i_cache_stride_shift = ~0;
+/*
+ * "clflush_cache_range()" needs to know what processor dependent stride size to
+ * use when it flushes cache lines including both d-cache and i-cache.
+ */
+/* Safest way to go: 32 bytes by 32 bytes */
+#define	CACHE_STRIDE_SHIFT	5
+unsigned long ia64_cache_stride_shift = ~0;
 
 /*
  * The merge_mask variable needs to be set to (max(iommu_page_size(iommu)) - 1).  This
@@ -852,13 +859,14 @@
 }
 
 /*
- * Calculate the max. cache line size.
+ * Do the following calculations:
  *
- * In addition, the minimum of the i-cache stride sizes is calculated for
- * "flush_icache_range()".
+ * 1. the max. cache line size.
+ * 2. the minimum of the i-cache stride sizes for "flush_icache_range()".
+ * 3. the minimum of the cache stride sizes for "clflush_cache_range()".
  */
 static void __cpuinit
-get_max_cacheline_size (void)
+get_cache_info(void)
 {
 	unsigned long line_size, max = 1;
 	u64 l, levels, unique_caches;
@@ -872,12 +880,14 @@
                 max = SMP_CACHE_BYTES;
 		/* Safest setup for "flush_icache_range()" */
 		ia64_i_cache_stride_shift = I_CACHE_STRIDE_SHIFT;
+		/* Safest setup for "clflush_cache_range()" */
+		ia64_cache_stride_shift = CACHE_STRIDE_SHIFT;
 		goto out;
         }
 
 	for (l = 0; l < levels; ++l) {
-		status = ia64_pal_cache_config_info(l, /* cache_type (data_or_unified)= */ 2,
-						    &cci);
+		/* cache_type (data_or_unified)=2 */
+		status = ia64_pal_cache_config_info(l, 2, &cci);
 		if (status != 0) {
 			printk(KERN_ERR
 			       "%s: ia64_pal_cache_config_info(l=%lu, 2) failed (status=%ld)\n",
@@ -885,15 +895,21 @@
 			max = SMP_CACHE_BYTES;
 			/* The safest setup for "flush_icache_range()" */
 			cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
+			/* The safest setup for "clflush_cache_range()" */
+			ia64_cache_stride_shift = CACHE_STRIDE_SHIFT;
 			cci.pcci_unified = 1;
+		} else {
+			if (cci.pcci_stride < ia64_cache_stride_shift)
+				ia64_cache_stride_shift = cci.pcci_stride;
+
+			line_size = 1 << cci.pcci_line_size;
+			if (line_size > max)
+				max = line_size;
 		}
-		line_size = 1 << cci.pcci_line_size;
-		if (line_size > max)
-			max = line_size;
+
 		if (!cci.pcci_unified) {
-			status = ia64_pal_cache_config_info(l,
-						    /* cache_type (instruction)= */ 1,
-						    &cci);
+			/* cache_type (instruction)=1*/
+			status = ia64_pal_cache_config_info(l, 1, &cci);
 			if (status != 0) {
 				printk(KERN_ERR
 				"%s: ia64_pal_cache_config_info(l=%lu, 1) failed (status=%ld)\n",
@@ -947,7 +963,7 @@
 	}
 #endif
 
-	get_max_cacheline_size();
+	get_cache_info();
 
 	/*
 	 * We can't pass "local_cpu_data" to identify_cpu() because we haven't called
diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
index 19c5a78..e12500a 100644
--- a/arch/ia64/kernel/signal.c
+++ b/arch/ia64/kernel/signal.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
@@ -439,6 +440,13 @@
 		sigaddset(&current->blocked, sig);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
+
+	/*
+	 * Let tracing know that we've done the handler setup.
+	 */
+	tracehook_signal_handler(sig, info, ka, &scr->pt,
+				 test_thread_flag(TIF_SINGLESTEP));
+
 	return 1;
 }
 
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index c0699f0..a312c9e 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1114,7 +1114,7 @@
 	struct hrtimer *p_ht = &vcpu->arch.hlt_timer;
 
 	if (hrtimer_cancel(p_ht))
-		hrtimer_start(p_ht, p_ht->expires, HRTIMER_MODE_ABS);
+		hrtimer_start_expires(p_ht, HRTIMER_MODE_ABS);
 }
 
 static enum hrtimer_restart hlt_timer_fn(struct hrtimer *data)
diff --git a/arch/ia64/lib/flush.S b/arch/ia64/lib/flush.S
index 2a0d27f..1d8c888 100644
--- a/arch/ia64/lib/flush.S
+++ b/arch/ia64/lib/flush.S
@@ -60,3 +60,58 @@
 	mov	ar.lc=r3		// restore ar.lc
 	br.ret.sptk.many rp
 END(flush_icache_range)
+
+	/*
+	 * clflush_cache_range(start,size)
+	 *
+	 *	Flush cache lines from start to start+size-1.
+	 *
+	 *	Must deal with range from start to start+size-1 but nothing else
+	 *	(need to be careful not to touch addresses that may be
+	 *	unmapped).
+	 *
+	 *	Note: "in0" and "in1" are preserved for debugging purposes.
+	 */
+	.section .kprobes.text,"ax"
+GLOBAL_ENTRY(clflush_cache_range)
+
+	.prologue
+	alloc	r2=ar.pfs,2,0,0,0
+	movl	r3=ia64_cache_stride_shift
+	mov	r21=1
+	add     r22=in1,in0
+	;;
+	ld8	r20=[r3]		// r20: stride shift
+	sub	r22=r22,r0,1		// last byte address
+	;;
+	shr.u	r23=in0,r20		// start / (stride size)
+	shr.u	r22=r22,r20		// (last byte address) / (stride size)
+	shl	r21=r21,r20		// r21: stride size of the i-cache(s)
+	;;
+	sub	r8=r22,r23		// number of strides - 1
+	shl	r24=r23,r20		// r24: addresses for "fc" =
+					//	"start" rounded down to stride
+					//	boundary
+	.save	ar.lc,r3
+	mov	r3=ar.lc		// save ar.lc
+	;;
+
+	.body
+	mov	ar.lc=r8
+	;;
+	/*
+	 * 32 byte aligned loop, even number of (actually 2) bundles
+	 */
+.Loop_fc:
+	fc	r24		// issuable on M0 only
+	add	r24=r21,r24	// we flush "stride size" bytes per iteration
+	nop.i	0
+	br.cloop.sptk.few .Loop_fc
+	;;
+	sync.i
+	;;
+	srlz.i
+	;;
+	mov	ar.lc=r3		// restore ar.lc
+	br.ret.sptk.many rp
+END(clflush_cache_range)
diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c
index 8caf424..bd9818a 100644
--- a/arch/ia64/mm/tlb.c
+++ b/arch/ia64/mm/tlb.c
@@ -362,9 +362,13 @@
 		per_cpu(ia64_tr_num, cpu) =
 				vm_info_1.pal_vm_info_1_s.max_dtr_entry+1;
 	if (per_cpu(ia64_tr_num, cpu) > IA64_TR_ALLOC_MAX) {
+		static int justonce = 1;
 		per_cpu(ia64_tr_num, cpu) = IA64_TR_ALLOC_MAX;
-		printk(KERN_DEBUG "TR register number exceeds IA64_TR_ALLOC_MAX!"
-			"IA64_TR_ALLOC_MAX should be extended\n");
+		if (justonce) {
+			justonce = 0;
+			printk(KERN_DEBUG "TR register number exceeds "
+			       "IA64_TR_ALLOC_MAX!\n");
+		}
 	}
 }
 
diff --git a/arch/ia64/oprofile/init.c b/arch/ia64/oprofile/init.c
index 125a602..31b545c 100644
--- a/arch/ia64/oprofile/init.c
+++ b/arch/ia64/oprofile/init.c
@@ -12,11 +12,11 @@
 #include <linux/init.h>
 #include <linux/errno.h>
  
-extern int perfmon_init(struct oprofile_operations * ops);
+extern int perfmon_init(struct oprofile_operations *ops);
 extern void perfmon_exit(void);
 extern void ia64_backtrace(struct pt_regs * const regs, unsigned int depth);
 
-int __init oprofile_arch_init(struct oprofile_operations * ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
 	int ret = -ENODEV;
 
diff --git a/arch/ia64/oprofile/perfmon.c b/arch/ia64/oprofile/perfmon.c
index bc41dd3..192d3e8 100644
--- a/arch/ia64/oprofile/perfmon.c
+++ b/arch/ia64/oprofile/perfmon.c
@@ -56,7 +56,7 @@
 };
 
 
-static char * get_cpu_type(void)
+static char *get_cpu_type(void)
 {
 	__u8 family = local_cpu_data->family;
 
@@ -75,7 +75,7 @@
 
 static int using_perfmon;
 
-int perfmon_init(struct oprofile_operations * ops)
+int perfmon_init(struct oprofile_operations *ops)
 {
 	int ret = pfm_register_buffer_fmt(&oprofile_fmt);
 	if (ret)
diff --git a/arch/ia64/scripts/pvcheck.sed b/arch/ia64/scripts/pvcheck.sed
new file mode 100644
index 0000000..ba66ac2
--- /dev/null
+++ b/arch/ia64/scripts/pvcheck.sed
@@ -0,0 +1,32 @@
+#
+# Checker for paravirtualizations of privileged operations.
+#
+s/ssm.*psr\.ic.*/.warning \"ssm psr.ic should not be used directly\"/g
+s/rsm.*psr\.ic.*/.warning \"rsm psr.ic should not be used directly\"/g
+s/ssm.*psr\.i.*/.warning \"ssm psr.i should not be used directly\"/g
+s/rsm.*psr\.i.*/.warning \"rsm psr.i should not be used directly\"/g
+s/ssm.*psr\.dt.*/.warning \"ssm psr.dt should not be used directly\"/g
+s/rsm.*psr\.dt.*/.warning \"rsm psr.dt should not be used directly\"/g
+s/mov.*=.*cr\.ifa/.warning \"cr.ifa should not used directly\"/g
+s/mov.*=.*cr\.itir/.warning \"cr.itir should not used directly\"/g
+s/mov.*=.*cr\.isr/.warning \"cr.isr should not used directly\"/g
+s/mov.*=.*cr\.iha/.warning \"cr.iha should not used directly\"/g
+s/mov.*=.*cr\.ipsr/.warning \"cr.ipsr should not used directly\"/g
+s/mov.*=.*cr\.iim/.warning \"cr.iim should not used directly\"/g
+s/mov.*=.*cr\.iip/.warning \"cr.iip should not used directly\"/g
+s/mov.*=.*cr\.ivr/.warning \"cr.ivr should not used directly\"/g
+s/mov.*=[^\.]*psr/.warning \"psr should not used directly\"/g	# avoid ar.fpsr
+s/mov.*=.*ar\.eflags/.warning \"ar.eflags should not used directly\"/g
+s/mov.*cr\.ifa.*=.*/.warning \"cr.ifa should not used directly\"/g
+s/mov.*cr\.itir.*=.*/.warning \"cr.itir should not used directly\"/g
+s/mov.*cr\.iha.*=.*/.warning \"cr.iha should not used directly\"/g
+s/mov.*cr\.ipsr.*=.*/.warning \"cr.ipsr should not used directly\"/g
+s/mov.*cr\.ifs.*=.*/.warning \"cr.ifs should not used directly\"/g
+s/mov.*cr\.iip.*=.*/.warning \"cr.iip should not used directly\"/g
+s/mov.*cr\.kr.*=.*/.warning \"cr.kr should not used directly\"/g
+s/mov.*ar\.eflags.*=.*/.warning \"ar.eflags should not used directly\"/g
+s/itc\.i.*/.warning \"itc.i should not be used directly.\"/g
+s/itc\.d.*/.warning \"itc.d should not be used directly.\"/g
+s/bsw\.0/.warning \"bsw.0 should not be used directly.\"/g
+s/bsw\.1/.warning \"bsw.1 should not be used directly.\"/g
+s/ptc\.ga.*/.warning \"ptc.ga should not be used directly.\"/g
diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c
index 6568942..bc610a6 100644
--- a/arch/ia64/sn/kernel/io_acpi_init.c
+++ b/arch/ia64/sn/kernel/io_acpi_init.c
@@ -232,7 +232,7 @@
 static unsigned int
 get_host_devfn(acpi_handle device_handle, acpi_handle rootbus_handle)
 {
-	unsigned long adr;
+	unsigned long long adr;
 	acpi_handle child;
 	unsigned int devfn;
 	int function;
@@ -292,8 +292,8 @@
 static acpi_status
 find_matching_device(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
-	unsigned long bbn = -1;
-	unsigned long adr;
+	unsigned long long bbn = -1;
+	unsigned long long adr;
 	acpi_handle parent = NULL;
 	acpi_status status;
 	unsigned int devfn;
@@ -348,7 +348,7 @@
 	unsigned int host_devfn;
 	struct sn_pcidev_match pcidev_match;
 	acpi_handle rootbus_handle;
-	unsigned long segment;
+	unsigned long long segment;
 	acpi_status status;
 
 	rootbus_handle = PCI_CONTROLLER(dev)->acpi_handle;
@@ -357,7 +357,7 @@
         if (ACPI_SUCCESS(status)) {
 		if (segment != pci_domain_nr(dev)) {
 			printk(KERN_ERR
-			       "%s: Segment number mismatch, 0x%lx vs 0x%x for: ",
+			       "%s: Segment number mismatch, 0x%llx vs 0x%x for: ",
 			       __func__, segment, pci_domain_nr(dev));
 			acpi_ns_print_node_pathname(rootbus_handle, NULL);
 			printk("\n");
diff --git a/arch/ia64/xen/Kconfig b/arch/ia64/xen/Kconfig
new file mode 100644
index 0000000..f1683a2
--- /dev/null
+++ b/arch/ia64/xen/Kconfig
@@ -0,0 +1,26 @@
+#
+# This Kconfig describes xen/ia64 options
+#
+
+config XEN
+	bool "Xen hypervisor support"
+	default y
+	depends on PARAVIRT && MCKINLEY && IA64_PAGE_SIZE_16KB && EXPERIMENTAL
+	select XEN_XENCOMM
+	select NO_IDLE_HZ
+
+	# those are required to save/restore.
+	select ARCH_SUSPEND_POSSIBLE
+	select SUSPEND
+	select PM_SLEEP
+	help
+	  Enable Xen hypervisor support.  Resulting kernel runs
+	  both as a guest OS on Xen and natively on hardware.
+
+config XEN_XENCOMM
+	depends on XEN
+	bool
+
+config NO_IDLE_HZ
+	depends on XEN
+	bool
diff --git a/arch/ia64/xen/Makefile b/arch/ia64/xen/Makefile
new file mode 100644
index 0000000..0ad0224
--- /dev/null
+++ b/arch/ia64/xen/Makefile
@@ -0,0 +1,22 @@
+#
+# Makefile for Xen components
+#
+
+obj-y := hypercall.o xenivt.o xensetup.o xen_pv_ops.o irq_xen.o \
+	 hypervisor.o xencomm.o xcom_hcall.o grant-table.o time.o suspend.o
+
+obj-$(CONFIG_IA64_GENERIC) += machvec.o
+
+AFLAGS_xenivt.o += -D__IA64_ASM_PARAVIRTUALIZED_XEN
+
+# xen multi compile
+ASM_PARAVIRT_MULTI_COMPILE_SRCS = ivt.S entry.S
+ASM_PARAVIRT_OBJS = $(addprefix xen-,$(ASM_PARAVIRT_MULTI_COMPILE_SRCS:.S=.o))
+obj-y += $(ASM_PARAVIRT_OBJS)
+define paravirtualized_xen
+AFLAGS_$(1) += -D__IA64_ASM_PARAVIRTUALIZED_XEN
+endef
+$(foreach o,$(ASM_PARAVIRT_OBJS),$(eval $(call paravirtualized_xen,$(o))))
+
+$(obj)/xen-%.o: $(src)/../kernel/%.S FORCE
+	$(call if_changed_dep,as_o_S)
diff --git a/arch/ia64/xen/grant-table.c b/arch/ia64/xen/grant-table.c
new file mode 100644
index 0000000..777dd9a
--- /dev/null
+++ b/arch/ia64/xen/grant-table.c
@@ -0,0 +1,155 @@
+/******************************************************************************
+ * arch/ia64/xen/grant-table.c
+ *
+ * Copyright (c) 2006 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/memory.h>
+#include <xen/grant_table.h>
+
+#include <asm/xen/hypervisor.h>
+
+struct vm_struct *xen_alloc_vm_area(unsigned long size)
+{
+	int order;
+	unsigned long virt;
+	unsigned long nr_pages;
+	struct vm_struct *area;
+
+	order = get_order(size);
+	virt = __get_free_pages(GFP_KERNEL, order);
+	if (virt == 0)
+		goto err0;
+	nr_pages = 1 << order;
+	scrub_pages(virt, nr_pages);
+
+	area = kmalloc(sizeof(*area), GFP_KERNEL);
+	if (area == NULL)
+		goto err1;
+
+	area->flags = VM_IOREMAP;
+	area->addr = (void *)virt;
+	area->size = size;
+	area->pages = NULL;
+	area->nr_pages = nr_pages;
+	area->phys_addr = 0;	/* xenbus_map_ring_valloc uses this field!  */
+
+	return area;
+
+err1:
+	free_pages(virt, order);
+err0:
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(xen_alloc_vm_area);
+
+void xen_free_vm_area(struct vm_struct *area)
+{
+	unsigned int order = get_order(area->size);
+	unsigned long i;
+	unsigned long phys_addr = __pa(area->addr);
+
+	/* This area is used for foreign page mappping.
+	 * So underlying machine page may not be assigned. */
+	for (i = 0; i < (1 << order); i++) {
+		unsigned long ret;
+		unsigned long gpfn = (phys_addr >> PAGE_SHIFT) + i;
+		struct xen_memory_reservation reservation = {
+			.nr_extents   = 1,
+			.address_bits = 0,
+			.extent_order = 0,
+			.domid        = DOMID_SELF
+		};
+		set_xen_guest_handle(reservation.extent_start, &gpfn);
+		ret = HYPERVISOR_memory_op(XENMEM_populate_physmap,
+					   &reservation);
+		BUG_ON(ret != 1);
+	}
+	free_pages((unsigned long)area->addr, order);
+	kfree(area);
+}
+EXPORT_SYMBOL_GPL(xen_free_vm_area);
+
+
+/****************************************************************************
+ * grant table hack
+ * cmd: GNTTABOP_xxx
+ */
+
+int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes,
+			   unsigned long max_nr_gframes,
+			   struct grant_entry **__shared)
+{
+	*__shared = __va(frames[0] << PAGE_SHIFT);
+	return 0;
+}
+
+void arch_gnttab_unmap_shared(struct grant_entry *shared,
+			      unsigned long nr_gframes)
+{
+	/* nothing */
+}
+
+static void
+gnttab_map_grant_ref_pre(struct gnttab_map_grant_ref *uop)
+{
+	uint32_t flags;
+
+	flags = uop->flags;
+
+	if (flags & GNTMAP_host_map) {
+		if (flags & GNTMAP_application_map) {
+			printk(KERN_DEBUG
+			       "GNTMAP_application_map is not supported yet: "
+			       "flags 0x%x\n", flags);
+			BUG();
+		}
+		if (flags & GNTMAP_contains_pte) {
+			printk(KERN_DEBUG
+			       "GNTMAP_contains_pte is not supported yet: "
+			       "flags 0x%x\n", flags);
+			BUG();
+		}
+	} else if (flags & GNTMAP_device_map) {
+		printk("GNTMAP_device_map is not supported yet 0x%x\n", flags);
+		BUG();	/* not yet. actually this flag is not used. */
+	} else {
+		BUG();
+	}
+}
+
+int
+HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count)
+{
+	if (cmd == GNTTABOP_map_grant_ref) {
+		unsigned int i;
+		for (i = 0; i < count; i++) {
+			gnttab_map_grant_ref_pre(
+				(struct gnttab_map_grant_ref *)uop + i);
+		}
+	}
+	return xencomm_hypercall_grant_table_op(cmd, uop, count);
+}
+
+EXPORT_SYMBOL(HYPERVISOR_grant_table_op);
diff --git a/arch/ia64/xen/hypercall.S b/arch/ia64/xen/hypercall.S
new file mode 100644
index 0000000..d4ff0b9
--- /dev/null
+++ b/arch/ia64/xen/hypercall.S
@@ -0,0 +1,91 @@
+/*
+ * Support routines for Xen hypercalls
+ *
+ * Copyright (C) 2005 Dan Magenheimer <dan.magenheimer@hp.com>
+ * Copyright (C) 2008 Yaozu (Eddie) Dong <eddie.dong@intel.com>
+ */
+
+#include <asm/asmmacro.h>
+#include <asm/intrinsics.h>
+#include <asm/xen/privop.h>
+
+/*
+ * Hypercalls without parameter.
+ */
+#define __HCALL0(name,hcall)		\
+	GLOBAL_ENTRY(name);		\
+	break	hcall;			\
+	br.ret.sptk.many rp;		\
+	END(name)
+
+/*
+ * Hypercalls with 1 parameter.
+ */
+#define __HCALL1(name,hcall)		\
+	GLOBAL_ENTRY(name);		\
+	mov r8=r32;			\
+	break	hcall;			\
+	br.ret.sptk.many rp;		\
+	END(name)
+
+/*
+ * Hypercalls with 2 parameters.
+ */
+#define __HCALL2(name,hcall)		\
+	GLOBAL_ENTRY(name);		\
+	mov r8=r32;			\
+	mov r9=r33;			\
+	break	hcall;			\
+	br.ret.sptk.many rp;		\
+	END(name)
+
+__HCALL0(xen_get_psr, HYPERPRIVOP_GET_PSR)
+__HCALL0(xen_get_ivr, HYPERPRIVOP_GET_IVR)
+__HCALL0(xen_get_tpr, HYPERPRIVOP_GET_TPR)
+__HCALL0(xen_hyper_ssm_i, HYPERPRIVOP_SSM_I)
+
+__HCALL1(xen_set_tpr, HYPERPRIVOP_SET_TPR)
+__HCALL1(xen_eoi, HYPERPRIVOP_EOI)
+__HCALL1(xen_thash, HYPERPRIVOP_THASH)
+__HCALL1(xen_set_itm, HYPERPRIVOP_SET_ITM)
+__HCALL1(xen_get_rr, HYPERPRIVOP_GET_RR)
+__HCALL1(xen_fc, HYPERPRIVOP_FC)
+__HCALL1(xen_get_cpuid, HYPERPRIVOP_GET_CPUID)
+__HCALL1(xen_get_pmd, HYPERPRIVOP_GET_PMD)
+
+__HCALL2(xen_ptcga, HYPERPRIVOP_PTC_GA)
+__HCALL2(xen_set_rr, HYPERPRIVOP_SET_RR)
+__HCALL2(xen_set_kr, HYPERPRIVOP_SET_KR)
+
+#ifdef CONFIG_IA32_SUPPORT
+__HCALL1(xen_get_eflag, HYPERPRIVOP_GET_EFLAG)
+__HCALL1(xen_set_eflag, HYPERPRIVOP_SET_EFLAG)	// refer SDM vol1 3.1.8
+#endif /* CONFIG_IA32_SUPPORT */
+
+GLOBAL_ENTRY(xen_set_rr0_to_rr4)
+	mov r8=r32
+	mov r9=r33
+	mov r10=r34
+	mov r11=r35
+	mov r14=r36
+	XEN_HYPER_SET_RR0_TO_RR4
+	br.ret.sptk.many rp
+	;;
+END(xen_set_rr0_to_rr4)
+
+GLOBAL_ENTRY(xen_send_ipi)
+	mov r14=r32
+	mov r15=r33
+	mov r2=0x400
+	break 0x1000
+	;;
+	br.ret.sptk.many rp
+	;;
+END(xen_send_ipi)
+
+GLOBAL_ENTRY(__hypercall)
+	mov r2=r37
+	break 0x1000
+	br.ret.sptk.many b0
+	;;
+END(__hypercall)
diff --git a/arch/ia64/xen/hypervisor.c b/arch/ia64/xen/hypervisor.c
new file mode 100644
index 0000000..cac4d97
--- /dev/null
+++ b/arch/ia64/xen/hypervisor.c
@@ -0,0 +1,96 @@
+/******************************************************************************
+ * arch/ia64/xen/hypervisor.c
+ *
+ * Copyright (c) 2006 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/efi.h>
+#include <asm/xen/hypervisor.h>
+#include <asm/xen/privop.h>
+
+#include "irq_xen.h"
+
+struct shared_info *HYPERVISOR_shared_info __read_mostly =
+	(struct shared_info *)XSI_BASE;
+EXPORT_SYMBOL(HYPERVISOR_shared_info);
+
+DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
+
+struct start_info *xen_start_info;
+EXPORT_SYMBOL(xen_start_info);
+
+EXPORT_SYMBOL(xen_domain_type);
+
+EXPORT_SYMBOL(__hypercall);
+
+/* Stolen from arch/x86/xen/enlighten.c */
+/*
+ * Flag to determine whether vcpu info placement is available on all
+ * VCPUs.  We assume it is to start with, and then set it to zero on
+ * the first failure.  This is because it can succeed on some VCPUs
+ * and not others, since it can involve hypervisor memory allocation,
+ * or because the guest failed to guarantee all the appropriate
+ * constraints on all VCPUs (ie buffer can't cross a page boundary).
+ *
+ * Note that any particular CPU may be using a placed vcpu structure,
+ * but we can only optimise if the all are.
+ *
+ * 0: not available, 1: available
+ */
+
+static void __init xen_vcpu_setup(int cpu)
+{
+	/*
+	 * WARNING:
+	 * before changing MAX_VIRT_CPUS,
+	 * check that shared_info fits on a page
+	 */
+	BUILD_BUG_ON(sizeof(struct shared_info) > PAGE_SIZE);
+	per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
+}
+
+void __init xen_setup_vcpu_info_placement(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu)
+		xen_vcpu_setup(cpu);
+}
+
+void __cpuinit
+xen_cpu_init(void)
+{
+	xen_smp_intr_init();
+}
+
+/**************************************************************************
+ * opt feature
+ */
+void
+xen_ia64_enable_opt_feature(void)
+{
+	/* Enable region 7 identity map optimizations in Xen */
+	struct xen_ia64_opt_feature optf;
+
+	optf.cmd = XEN_IA64_OPTF_IDENT_MAP_REG7;
+	optf.on = XEN_IA64_OPTF_ON;
+	optf.pgprot = pgprot_val(PAGE_KERNEL);
+	optf.key = 0;	/* No key on linux. */
+	HYPERVISOR_opt_feature(&optf);
+}
diff --git a/arch/ia64/xen/irq_xen.c b/arch/ia64/xen/irq_xen.c
new file mode 100644
index 0000000..af93aad
--- /dev/null
+++ b/arch/ia64/xen/irq_xen.c
@@ -0,0 +1,435 @@
+/******************************************************************************
+ * arch/ia64/xen/irq_xen.c
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/cpu.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/callback.h>
+#include <xen/events.h>
+
+#include <asm/xen/privop.h>
+
+#include "irq_xen.h"
+
+/***************************************************************************
+ * pv_irq_ops
+ * irq operations
+ */
+
+static int
+xen_assign_irq_vector(int irq)
+{
+	struct physdev_irq irq_op;
+
+	irq_op.irq = irq;
+	if (HYPERVISOR_physdev_op(PHYSDEVOP_alloc_irq_vector, &irq_op))
+		return -ENOSPC;
+
+	return irq_op.vector;
+}
+
+static void
+xen_free_irq_vector(int vector)
+{
+	struct physdev_irq irq_op;
+
+	if (vector < IA64_FIRST_DEVICE_VECTOR ||
+	    vector > IA64_LAST_DEVICE_VECTOR)
+		return;
+
+	irq_op.vector = vector;
+	if (HYPERVISOR_physdev_op(PHYSDEVOP_free_irq_vector, &irq_op))
+		printk(KERN_WARNING "%s: xen_free_irq_vecotr fail vector=%d\n",
+		       __func__, vector);
+}
+
+
+static DEFINE_PER_CPU(int, timer_irq) = -1;
+static DEFINE_PER_CPU(int, ipi_irq) = -1;
+static DEFINE_PER_CPU(int, resched_irq) = -1;
+static DEFINE_PER_CPU(int, cmc_irq) = -1;
+static DEFINE_PER_CPU(int, cmcp_irq) = -1;
+static DEFINE_PER_CPU(int, cpep_irq) = -1;
+#define NAME_SIZE	15
+static DEFINE_PER_CPU(char[NAME_SIZE], timer_name);
+static DEFINE_PER_CPU(char[NAME_SIZE], ipi_name);
+static DEFINE_PER_CPU(char[NAME_SIZE], resched_name);
+static DEFINE_PER_CPU(char[NAME_SIZE], cmc_name);
+static DEFINE_PER_CPU(char[NAME_SIZE], cmcp_name);
+static DEFINE_PER_CPU(char[NAME_SIZE], cpep_name);
+#undef NAME_SIZE
+
+struct saved_irq {
+	unsigned int irq;
+	struct irqaction *action;
+};
+/* 16 should be far optimistic value, since only several percpu irqs
+ * are registered early.
+ */
+#define MAX_LATE_IRQ	16
+static struct saved_irq saved_percpu_irqs[MAX_LATE_IRQ];
+static unsigned short late_irq_cnt;
+static unsigned short saved_irq_cnt;
+static int xen_slab_ready;
+
+#ifdef CONFIG_SMP
+/* Dummy stub. Though we may check XEN_RESCHEDULE_VECTOR before __do_IRQ,
+ * it ends up to issue several memory accesses upon percpu data and
+ * thus adds unnecessary traffic to other paths.
+ */
+static irqreturn_t
+xen_dummy_handler(int irq, void *dev_id)
+{
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction xen_ipi_irqaction = {
+	.handler =	handle_IPI,
+	.flags =	IRQF_DISABLED,
+	.name =		"IPI"
+};
+
+static struct irqaction xen_resched_irqaction = {
+	.handler =	xen_dummy_handler,
+	.flags =	IRQF_DISABLED,
+	.name =		"resched"
+};
+
+static struct irqaction xen_tlb_irqaction = {
+	.handler =	xen_dummy_handler,
+	.flags =	IRQF_DISABLED,
+	.name =		"tlb_flush"
+};
+#endif
+
+/*
+ * This is xen version percpu irq registration, which needs bind
+ * to xen specific evtchn sub-system. One trick here is that xen
+ * evtchn binding interface depends on kmalloc because related
+ * port needs to be freed at device/cpu down. So we cache the
+ * registration on BSP before slab is ready and then deal them
+ * at later point. For rest instances happening after slab ready,
+ * we hook them to xen evtchn immediately.
+ *
+ * FIXME: MCA is not supported by far, and thus "nomca" boot param is
+ * required.
+ */
+static void
+__xen_register_percpu_irq(unsigned int cpu, unsigned int vec,
+			struct irqaction *action, int save)
+{
+	irq_desc_t *desc;
+	int irq = 0;
+
+	if (xen_slab_ready) {
+		switch (vec) {
+		case IA64_TIMER_VECTOR:
+			snprintf(per_cpu(timer_name, cpu),
+				 sizeof(per_cpu(timer_name, cpu)),
+				 "%s%d", action->name, cpu);
+			irq = bind_virq_to_irqhandler(VIRQ_ITC, cpu,
+				action->handler, action->flags,
+				per_cpu(timer_name, cpu), action->dev_id);
+			per_cpu(timer_irq, cpu) = irq;
+			break;
+		case IA64_IPI_RESCHEDULE:
+			snprintf(per_cpu(resched_name, cpu),
+				 sizeof(per_cpu(resched_name, cpu)),
+				 "%s%d", action->name, cpu);
+			irq = bind_ipi_to_irqhandler(XEN_RESCHEDULE_VECTOR, cpu,
+				action->handler, action->flags,
+				per_cpu(resched_name, cpu), action->dev_id);
+			per_cpu(resched_irq, cpu) = irq;
+			break;
+		case IA64_IPI_VECTOR:
+			snprintf(per_cpu(ipi_name, cpu),
+				 sizeof(per_cpu(ipi_name, cpu)),
+				 "%s%d", action->name, cpu);
+			irq = bind_ipi_to_irqhandler(XEN_IPI_VECTOR, cpu,
+				action->handler, action->flags,
+				per_cpu(ipi_name, cpu), action->dev_id);
+			per_cpu(ipi_irq, cpu) = irq;
+			break;
+		case IA64_CMC_VECTOR:
+			snprintf(per_cpu(cmc_name, cpu),
+				 sizeof(per_cpu(cmc_name, cpu)),
+				 "%s%d", action->name, cpu);
+			irq = bind_virq_to_irqhandler(VIRQ_MCA_CMC, cpu,
+						      action->handler,
+						      action->flags,
+						      per_cpu(cmc_name, cpu),
+						      action->dev_id);
+			per_cpu(cmc_irq, cpu) = irq;
+			break;
+		case IA64_CMCP_VECTOR:
+			snprintf(per_cpu(cmcp_name, cpu),
+				 sizeof(per_cpu(cmcp_name, cpu)),
+				 "%s%d", action->name, cpu);
+			irq = bind_ipi_to_irqhandler(XEN_CMCP_VECTOR, cpu,
+						     action->handler,
+						     action->flags,
+						     per_cpu(cmcp_name, cpu),
+						     action->dev_id);
+			per_cpu(cmcp_irq, cpu) = irq;
+			break;
+		case IA64_CPEP_VECTOR:
+			snprintf(per_cpu(cpep_name, cpu),
+				 sizeof(per_cpu(cpep_name, cpu)),
+				 "%s%d", action->name, cpu);
+			irq = bind_ipi_to_irqhandler(XEN_CPEP_VECTOR, cpu,
+						     action->handler,
+						     action->flags,
+						     per_cpu(cpep_name, cpu),
+						     action->dev_id);
+			per_cpu(cpep_irq, cpu) = irq;
+			break;
+		case IA64_CPE_VECTOR:
+		case IA64_MCA_RENDEZ_VECTOR:
+		case IA64_PERFMON_VECTOR:
+		case IA64_MCA_WAKEUP_VECTOR:
+		case IA64_SPURIOUS_INT_VECTOR:
+			/* No need to complain, these aren't supported. */
+			break;
+		default:
+			printk(KERN_WARNING "Percpu irq %d is unsupported "
+			       "by xen!\n", vec);
+			break;
+		}
+		BUG_ON(irq < 0);
+
+		if (irq > 0) {
+			/*
+			 * Mark percpu.  Without this, migrate_irqs() will
+			 * mark the interrupt for migrations and trigger it
+			 * on cpu hotplug.
+			 */
+			desc = irq_desc + irq;
+			desc->status |= IRQ_PER_CPU;
+		}
+	}
+
+	/* For BSP, we cache registered percpu irqs, and then re-walk
+	 * them when initializing APs
+	 */
+	if (!cpu && save) {
+		BUG_ON(saved_irq_cnt == MAX_LATE_IRQ);
+		saved_percpu_irqs[saved_irq_cnt].irq = vec;
+		saved_percpu_irqs[saved_irq_cnt].action = action;
+		saved_irq_cnt++;
+		if (!xen_slab_ready)
+			late_irq_cnt++;
+	}
+}
+
+static void
+xen_register_percpu_irq(ia64_vector vec, struct irqaction *action)
+{
+	__xen_register_percpu_irq(smp_processor_id(), vec, action, 1);
+}
+
+static void
+xen_bind_early_percpu_irq(void)
+{
+	int i;
+
+	xen_slab_ready = 1;
+	/* There's no race when accessing this cached array, since only
+	 * BSP will face with such step shortly
+	 */
+	for (i = 0; i < late_irq_cnt; i++)
+		__xen_register_percpu_irq(smp_processor_id(),
+					  saved_percpu_irqs[i].irq,
+					  saved_percpu_irqs[i].action, 0);
+}
+
+/* FIXME: There's no obvious point to check whether slab is ready. So
+ * a hack is used here by utilizing a late time hook.
+ */
+
+#ifdef CONFIG_HOTPLUG_CPU
+static int __devinit
+unbind_evtchn_callback(struct notifier_block *nfb,
+		       unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+
+	if (action == CPU_DEAD) {
+		/* Unregister evtchn.  */
+		if (per_cpu(cpep_irq, cpu) >= 0) {
+			unbind_from_irqhandler(per_cpu(cpep_irq, cpu), NULL);
+			per_cpu(cpep_irq, cpu) = -1;
+		}
+		if (per_cpu(cmcp_irq, cpu) >= 0) {
+			unbind_from_irqhandler(per_cpu(cmcp_irq, cpu), NULL);
+			per_cpu(cmcp_irq, cpu) = -1;
+		}
+		if (per_cpu(cmc_irq, cpu) >= 0) {
+			unbind_from_irqhandler(per_cpu(cmc_irq, cpu), NULL);
+			per_cpu(cmc_irq, cpu) = -1;
+		}
+		if (per_cpu(ipi_irq, cpu) >= 0) {
+			unbind_from_irqhandler(per_cpu(ipi_irq, cpu), NULL);
+			per_cpu(ipi_irq, cpu) = -1;
+		}
+		if (per_cpu(resched_irq, cpu) >= 0) {
+			unbind_from_irqhandler(per_cpu(resched_irq, cpu),
+						NULL);
+			per_cpu(resched_irq, cpu) = -1;
+		}
+		if (per_cpu(timer_irq, cpu) >= 0) {
+			unbind_from_irqhandler(per_cpu(timer_irq, cpu), NULL);
+			per_cpu(timer_irq, cpu) = -1;
+		}
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block unbind_evtchn_notifier = {
+	.notifier_call = unbind_evtchn_callback,
+	.priority = 0
+};
+#endif
+
+void xen_smp_intr_init_early(unsigned int cpu)
+{
+#ifdef CONFIG_SMP
+	unsigned int i;
+
+	for (i = 0; i < saved_irq_cnt; i++)
+		__xen_register_percpu_irq(cpu, saved_percpu_irqs[i].irq,
+					  saved_percpu_irqs[i].action, 0);
+#endif
+}
+
+void xen_smp_intr_init(void)
+{
+#ifdef CONFIG_SMP
+	unsigned int cpu = smp_processor_id();
+	struct callback_register event = {
+		.type = CALLBACKTYPE_event,
+		.address = { .ip = (unsigned long)&xen_event_callback },
+	};
+
+	if (cpu == 0) {
+		/* Initialization was already done for boot cpu.  */
+#ifdef CONFIG_HOTPLUG_CPU
+		/* Register the notifier only once.  */
+		register_cpu_notifier(&unbind_evtchn_notifier);
+#endif
+		return;
+	}
+
+	/* This should be piggyback when setup vcpu guest context */
+	BUG_ON(HYPERVISOR_callback_op(CALLBACKOP_register, &event));
+#endif /* CONFIG_SMP */
+}
+
+void __init
+xen_irq_init(void)
+{
+	struct callback_register event = {
+		.type = CALLBACKTYPE_event,
+		.address = { .ip = (unsigned long)&xen_event_callback },
+	};
+
+	xen_init_IRQ();
+	BUG_ON(HYPERVISOR_callback_op(CALLBACKOP_register, &event));
+	late_time_init = xen_bind_early_percpu_irq;
+}
+
+void
+xen_platform_send_ipi(int cpu, int vector, int delivery_mode, int redirect)
+{
+#ifdef CONFIG_SMP
+	/* TODO: we need to call vcpu_up here */
+	if (unlikely(vector == ap_wakeup_vector)) {
+		/* XXX
+		 * This should be in __cpu_up(cpu) in ia64 smpboot.c
+		 * like x86. But don't want to modify it,
+		 * keep it untouched.
+		 */
+		xen_smp_intr_init_early(cpu);
+
+		xen_send_ipi(cpu, vector);
+		/* vcpu_prepare_and_up(cpu); */
+		return;
+	}
+#endif
+
+	switch (vector) {
+	case IA64_IPI_VECTOR:
+		xen_send_IPI_one(cpu, XEN_IPI_VECTOR);
+		break;
+	case IA64_IPI_RESCHEDULE:
+		xen_send_IPI_one(cpu, XEN_RESCHEDULE_VECTOR);
+		break;
+	case IA64_CMCP_VECTOR:
+		xen_send_IPI_one(cpu, XEN_CMCP_VECTOR);
+		break;
+	case IA64_CPEP_VECTOR:
+		xen_send_IPI_one(cpu, XEN_CPEP_VECTOR);
+		break;
+	case IA64_TIMER_VECTOR: {
+		/* this is used only once by check_sal_cache_flush()
+		   at boot time */
+		static int used = 0;
+		if (!used) {
+			xen_send_ipi(cpu, IA64_TIMER_VECTOR);
+			used = 1;
+			break;
+		}
+		/* fallthrough */
+	}
+	default:
+		printk(KERN_WARNING "Unsupported IPI type 0x%x\n",
+		       vector);
+		notify_remote_via_irq(0); /* defaults to 0 irq */
+		break;
+	}
+}
+
+static void __init
+xen_register_ipi(void)
+{
+#ifdef CONFIG_SMP
+	register_percpu_irq(IA64_IPI_VECTOR, &xen_ipi_irqaction);
+	register_percpu_irq(IA64_IPI_RESCHEDULE, &xen_resched_irqaction);
+	register_percpu_irq(IA64_IPI_LOCAL_TLB_FLUSH, &xen_tlb_irqaction);
+#endif
+}
+
+static void
+xen_resend_irq(unsigned int vector)
+{
+	(void)resend_irq_on_evtchn(vector);
+}
+
+const struct pv_irq_ops xen_irq_ops __initdata = {
+	.register_ipi = xen_register_ipi,
+
+	.assign_irq_vector = xen_assign_irq_vector,
+	.free_irq_vector = xen_free_irq_vector,
+	.register_percpu_irq = xen_register_percpu_irq,
+
+	.resend_irq = xen_resend_irq,
+};
diff --git a/arch/ia64/xen/irq_xen.h b/arch/ia64/xen/irq_xen.h
new file mode 100644
index 0000000..26110f3
--- /dev/null
+++ b/arch/ia64/xen/irq_xen.h
@@ -0,0 +1,34 @@
+/******************************************************************************
+ * arch/ia64/xen/irq_xen.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef IRQ_XEN_H
+#define IRQ_XEN_H
+
+extern void (*late_time_init)(void);
+extern char xen_event_callback;
+void __init xen_init_IRQ(void);
+
+extern const struct pv_irq_ops xen_irq_ops __initdata;
+extern void xen_smp_intr_init(void);
+extern void xen_send_ipi(int cpu, int vec);
+
+#endif /* IRQ_XEN_H */
diff --git a/arch/ia64/xen/machvec.c b/arch/ia64/xen/machvec.c
new file mode 100644
index 0000000..4ad588a
--- /dev/null
+++ b/arch/ia64/xen/machvec.c
@@ -0,0 +1,4 @@
+#define MACHVEC_PLATFORM_NAME           xen
+#define MACHVEC_PLATFORM_HEADER         <asm/machvec_xen.h>
+#include <asm/machvec_init.h>
+
diff --git a/arch/ia64/xen/suspend.c b/arch/ia64/xen/suspend.c
new file mode 100644
index 0000000..fd66b04
--- /dev/null
+++ b/arch/ia64/xen/suspend.c
@@ -0,0 +1,64 @@
+/******************************************************************************
+ * arch/ia64/xen/suspend.c
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * suspend/resume
+ */
+
+#include <xen/xen-ops.h>
+#include <asm/xen/hypervisor.h>
+#include "time.h"
+
+void
+xen_mm_pin_all(void)
+{
+	/* nothing */
+}
+
+void
+xen_mm_unpin_all(void)
+{
+	/* nothing */
+}
+
+void xen_pre_device_suspend(void)
+{
+	/* nothing */
+}
+
+void
+xen_pre_suspend()
+{
+	/* nothing */
+}
+
+void
+xen_post_suspend(int suspend_cancelled)
+{
+	if (suspend_cancelled)
+		return;
+
+	xen_ia64_enable_opt_feature();
+	/* add more if necessary */
+}
+
+void xen_arch_resume(void)
+{
+	xen_timer_resume_on_aps();
+}
diff --git a/arch/ia64/xen/time.c b/arch/ia64/xen/time.c
new file mode 100644
index 0000000..d15a94c
--- /dev/null
+++ b/arch/ia64/xen/time.c
@@ -0,0 +1,213 @@
+/******************************************************************************
+ * arch/ia64/xen/time.c
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel_stat.h>
+#include <linux/posix-timers.h>
+#include <linux/irq.h>
+#include <linux/clocksource.h>
+
+#include <asm/timex.h>
+
+#include <asm/xen/hypervisor.h>
+
+#include <xen/interface/vcpu.h>
+
+#include "../kernel/fsyscall_gtod_data.h"
+
+DEFINE_PER_CPU(struct vcpu_runstate_info, runstate);
+DEFINE_PER_CPU(unsigned long, processed_stolen_time);
+DEFINE_PER_CPU(unsigned long, processed_blocked_time);
+
+/* taken from i386/kernel/time-xen.c */
+static void xen_init_missing_ticks_accounting(int cpu)
+{
+	struct vcpu_register_runstate_memory_area area;
+	struct vcpu_runstate_info *runstate = &per_cpu(runstate, cpu);
+	int rc;
+
+	memset(runstate, 0, sizeof(*runstate));
+
+	area.addr.v = runstate;
+	rc = HYPERVISOR_vcpu_op(VCPUOP_register_runstate_memory_area, cpu,
+				&area);
+	WARN_ON(rc && rc != -ENOSYS);
+
+	per_cpu(processed_blocked_time, cpu) = runstate->time[RUNSTATE_blocked];
+	per_cpu(processed_stolen_time, cpu) = runstate->time[RUNSTATE_runnable]
+					    + runstate->time[RUNSTATE_offline];
+}
+
+/*
+ * Runstate accounting
+ */
+/* stolen from arch/x86/xen/time.c */
+static void get_runstate_snapshot(struct vcpu_runstate_info *res)
+{
+	u64 state_time;
+	struct vcpu_runstate_info *state;
+
+	BUG_ON(preemptible());
+
+	state = &__get_cpu_var(runstate);
+
+	/*
+	 * The runstate info is always updated by the hypervisor on
+	 * the current CPU, so there's no need to use anything
+	 * stronger than a compiler barrier when fetching it.
+	 */
+	do {
+		state_time = state->state_entry_time;
+		rmb();
+		*res = *state;
+		rmb();
+	} while (state->state_entry_time != state_time);
+}
+
+#define NS_PER_TICK (1000000000LL/HZ)
+
+static unsigned long
+consider_steal_time(unsigned long new_itm)
+{
+	unsigned long stolen, blocked;
+	unsigned long delta_itm = 0, stolentick = 0;
+	int cpu = smp_processor_id();
+	struct vcpu_runstate_info runstate;
+	struct task_struct *p = current;
+
+	get_runstate_snapshot(&runstate);
+
+	/*
+	 * Check for vcpu migration effect
+	 * In this case, itc value is reversed.
+	 * This causes huge stolen value.
+	 * This function just checks and reject this effect.
+	 */
+	if (!time_after_eq(runstate.time[RUNSTATE_blocked],
+			   per_cpu(processed_blocked_time, cpu)))
+		blocked = 0;
+
+	if (!time_after_eq(runstate.time[RUNSTATE_runnable] +
+			   runstate.time[RUNSTATE_offline],
+			   per_cpu(processed_stolen_time, cpu)))
+		stolen = 0;
+
+	if (!time_after(delta_itm + new_itm, ia64_get_itc()))
+		stolentick = ia64_get_itc() - new_itm;
+
+	do_div(stolentick, NS_PER_TICK);
+	stolentick++;
+
+	do_div(stolen, NS_PER_TICK);
+
+	if (stolen > stolentick)
+		stolen = stolentick;
+
+	stolentick -= stolen;
+	do_div(blocked, NS_PER_TICK);
+
+	if (blocked > stolentick)
+		blocked = stolentick;
+
+	if (stolen > 0 || blocked > 0) {
+		account_steal_time(NULL, jiffies_to_cputime(stolen));
+		account_steal_time(idle_task(cpu), jiffies_to_cputime(blocked));
+		run_local_timers();
+
+		if (rcu_pending(cpu))
+			rcu_check_callbacks(cpu, user_mode(get_irq_regs()));
+
+		scheduler_tick();
+		run_posix_cpu_timers(p);
+		delta_itm += local_cpu_data->itm_delta * (stolen + blocked);
+
+		if (cpu == time_keeper_id) {
+			write_seqlock(&xtime_lock);
+			do_timer(stolen + blocked);
+			local_cpu_data->itm_next = delta_itm + new_itm;
+			write_sequnlock(&xtime_lock);
+		} else {
+			local_cpu_data->itm_next = delta_itm + new_itm;
+		}
+		per_cpu(processed_stolen_time, cpu) += NS_PER_TICK * stolen;
+		per_cpu(processed_blocked_time, cpu) += NS_PER_TICK * blocked;
+	}
+	return delta_itm;
+}
+
+static int xen_do_steal_accounting(unsigned long *new_itm)
+{
+	unsigned long delta_itm;
+	delta_itm = consider_steal_time(*new_itm);
+	*new_itm += delta_itm;
+	if (time_after(*new_itm, ia64_get_itc()) && delta_itm)
+		return 1;
+
+	return 0;
+}
+
+static void xen_itc_jitter_data_reset(void)
+{
+	u64 lcycle, ret;
+
+	do {
+		lcycle = itc_jitter_data.itc_lastcycle;
+		ret = cmpxchg(&itc_jitter_data.itc_lastcycle, lcycle, 0);
+	} while (unlikely(ret != lcycle));
+}
+
+struct pv_time_ops xen_time_ops __initdata = {
+	.init_missing_ticks_accounting	= xen_init_missing_ticks_accounting,
+	.do_steal_accounting		= xen_do_steal_accounting,
+	.clocksource_resume		= xen_itc_jitter_data_reset,
+};
+
+/* Called after suspend, to resume time.  */
+static void xen_local_tick_resume(void)
+{
+	/* Just trigger a tick.  */
+	ia64_cpu_local_tick();
+	touch_softlockup_watchdog();
+}
+
+void
+xen_timer_resume(void)
+{
+	unsigned int cpu;
+
+	xen_local_tick_resume();
+
+	for_each_online_cpu(cpu)
+		xen_init_missing_ticks_accounting(cpu);
+}
+
+static void ia64_cpu_local_tick_fn(void *unused)
+{
+	xen_local_tick_resume();
+	xen_init_missing_ticks_accounting(smp_processor_id());
+}
+
+void
+xen_timer_resume_on_aps(void)
+{
+	smp_call_function(&ia64_cpu_local_tick_fn, NULL, 1);
+}
diff --git a/arch/ia64/xen/time.h b/arch/ia64/xen/time.h
new file mode 100644
index 0000000..f98d7e1
--- /dev/null
+++ b/arch/ia64/xen/time.h
@@ -0,0 +1,24 @@
+/******************************************************************************
+ * arch/ia64/xen/time.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+extern struct pv_time_ops xen_time_ops __initdata;
+void xen_timer_resume_on_aps(void);
diff --git a/arch/ia64/xen/xcom_hcall.c b/arch/ia64/xen/xcom_hcall.c
new file mode 100644
index 0000000..ccaf743
--- /dev/null
+++ b/arch/ia64/xen/xcom_hcall.c
@@ -0,0 +1,441 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ *          Tristan Gingold <tristan.gingold@bull.net>
+ *
+ *          Copyright (c) 2007
+ *          Isaku Yamahata <yamahata at valinux co jp>
+ *                          VA Linux Systems Japan K.K.
+ *          consolidate mini and inline version.
+ */
+
+#include <linux/module.h>
+#include <xen/interface/xen.h>
+#include <xen/interface/memory.h>
+#include <xen/interface/grant_table.h>
+#include <xen/interface/callback.h>
+#include <xen/interface/vcpu.h>
+#include <asm/xen/hypervisor.h>
+#include <asm/xen/xencomm.h>
+
+/* Xencomm notes:
+ * This file defines hypercalls to be used by xencomm.  The hypercalls simply
+ * create inlines or mini descriptors for pointers and then call the raw arch
+ * hypercall xencomm_arch_hypercall_XXX
+ *
+ * If the arch wants to directly use these hypercalls, simply define macros
+ * in asm/xen/hypercall.h, eg:
+ *  #define HYPERVISOR_sched_op xencomm_hypercall_sched_op
+ *
+ * The arch may also define HYPERVISOR_xxx as a function and do more operations
+ * before/after doing the hypercall.
+ *
+ * Note: because only inline or mini descriptors are created these functions
+ * must only be called with in kernel memory parameters.
+ */
+
+int
+xencomm_hypercall_console_io(int cmd, int count, char *str)
+{
+	/* xen early printk uses console io hypercall before
+	 * xencomm initialization. In that case, we just ignore it.
+	 */
+	if (!xencomm_is_initialized())
+		return 0;
+
+	return xencomm_arch_hypercall_console_io
+		(cmd, count, xencomm_map_no_alloc(str, count));
+}
+EXPORT_SYMBOL_GPL(xencomm_hypercall_console_io);
+
+int
+xencomm_hypercall_event_channel_op(int cmd, void *op)
+{
+	struct xencomm_handle *desc;
+	desc = xencomm_map_no_alloc(op, sizeof(struct evtchn_op));
+	if (desc == NULL)
+		return -EINVAL;
+
+	return xencomm_arch_hypercall_event_channel_op(cmd, desc);
+}
+EXPORT_SYMBOL_GPL(xencomm_hypercall_event_channel_op);
+
+int
+xencomm_hypercall_xen_version(int cmd, void *arg)
+{
+	struct xencomm_handle *desc;
+	unsigned int argsize;
+
+	switch (cmd) {
+	case XENVER_version:
+		/* do not actually pass an argument */
+		return xencomm_arch_hypercall_xen_version(cmd, 0);
+	case XENVER_extraversion:
+		argsize = sizeof(struct xen_extraversion);
+		break;
+	case XENVER_compile_info:
+		argsize = sizeof(struct xen_compile_info);
+		break;
+	case XENVER_capabilities:
+		argsize = sizeof(struct xen_capabilities_info);
+		break;
+	case XENVER_changeset:
+		argsize = sizeof(struct xen_changeset_info);
+		break;
+	case XENVER_platform_parameters:
+		argsize = sizeof(struct xen_platform_parameters);
+		break;
+	case XENVER_get_features:
+		argsize = (arg == NULL) ? 0 : sizeof(struct xen_feature_info);
+		break;
+
+	default:
+		printk(KERN_DEBUG
+		       "%s: unknown version op %d\n", __func__, cmd);
+		return -ENOSYS;
+	}
+
+	desc = xencomm_map_no_alloc(arg, argsize);
+	if (desc == NULL)
+		return -EINVAL;
+
+	return xencomm_arch_hypercall_xen_version(cmd, desc);
+}
+EXPORT_SYMBOL_GPL(xencomm_hypercall_xen_version);
+
+int
+xencomm_hypercall_physdev_op(int cmd, void *op)
+{
+	unsigned int argsize;
+
+	switch (cmd) {
+	case PHYSDEVOP_apic_read:
+	case PHYSDEVOP_apic_write:
+		argsize = sizeof(struct physdev_apic);
+		break;
+	case PHYSDEVOP_alloc_irq_vector:
+	case PHYSDEVOP_free_irq_vector:
+		argsize = sizeof(struct physdev_irq);
+		break;
+	case PHYSDEVOP_irq_status_query:
+		argsize = sizeof(struct physdev_irq_status_query);
+		break;
+
+	default:
+		printk(KERN_DEBUG
+		       "%s: unknown physdev op %d\n", __func__, cmd);
+		return -ENOSYS;
+	}
+
+	return xencomm_arch_hypercall_physdev_op
+		(cmd, xencomm_map_no_alloc(op, argsize));
+}
+
+static int
+xencommize_grant_table_op(struct xencomm_mini **xc_area,
+			  unsigned int cmd, void *op, unsigned int count,
+			  struct xencomm_handle **desc)
+{
+	struct xencomm_handle *desc1;
+	unsigned int argsize;
+
+	switch (cmd) {
+	case GNTTABOP_map_grant_ref:
+		argsize = sizeof(struct gnttab_map_grant_ref);
+		break;
+	case GNTTABOP_unmap_grant_ref:
+		argsize = sizeof(struct gnttab_unmap_grant_ref);
+		break;
+	case GNTTABOP_setup_table:
+	{
+		struct gnttab_setup_table *setup = op;
+
+		argsize = sizeof(*setup);
+
+		if (count != 1)
+			return -EINVAL;
+		desc1 = __xencomm_map_no_alloc
+			(xen_guest_handle(setup->frame_list),
+			 setup->nr_frames *
+			 sizeof(*xen_guest_handle(setup->frame_list)),
+			 *xc_area);
+		if (desc1 == NULL)
+			return -EINVAL;
+		(*xc_area)++;
+		set_xen_guest_handle(setup->frame_list, (void *)desc1);
+		break;
+	}
+	case GNTTABOP_dump_table:
+		argsize = sizeof(struct gnttab_dump_table);
+		break;
+	case GNTTABOP_transfer:
+		argsize = sizeof(struct gnttab_transfer);
+		break;
+	case GNTTABOP_copy:
+		argsize = sizeof(struct gnttab_copy);
+		break;
+	case GNTTABOP_query_size:
+		argsize = sizeof(struct gnttab_query_size);
+		break;
+	default:
+		printk(KERN_DEBUG "%s: unknown hypercall grant table op %d\n",
+		       __func__, cmd);
+		BUG();
+	}
+
+	*desc = __xencomm_map_no_alloc(op, count * argsize, *xc_area);
+	if (*desc == NULL)
+		return -EINVAL;
+	(*xc_area)++;
+
+	return 0;
+}
+
+int
+xencomm_hypercall_grant_table_op(unsigned int cmd, void *op,
+				 unsigned int count)
+{
+	int rc;
+	struct xencomm_handle *desc;
+	XENCOMM_MINI_ALIGNED(xc_area, 2);
+
+	rc = xencommize_grant_table_op(&xc_area, cmd, op, count, &desc);
+	if (rc)
+		return rc;
+
+	return xencomm_arch_hypercall_grant_table_op(cmd, desc, count);
+}
+EXPORT_SYMBOL_GPL(xencomm_hypercall_grant_table_op);
+
+int
+xencomm_hypercall_sched_op(int cmd, void *arg)
+{
+	struct xencomm_handle *desc;
+	unsigned int argsize;
+
+	switch (cmd) {
+	case SCHEDOP_yield:
+	case SCHEDOP_block:
+		argsize = 0;
+		break;
+	case SCHEDOP_shutdown:
+		argsize = sizeof(struct sched_shutdown);
+		break;
+	case SCHEDOP_poll:
+	{
+		struct sched_poll *poll = arg;
+		struct xencomm_handle *ports;
+
+		argsize = sizeof(struct sched_poll);
+		ports = xencomm_map_no_alloc(xen_guest_handle(poll->ports),
+				     sizeof(*xen_guest_handle(poll->ports)));
+
+		set_xen_guest_handle(poll->ports, (void *)ports);
+		break;
+	}
+	default:
+		printk(KERN_DEBUG "%s: unknown sched op %d\n", __func__, cmd);
+		return -ENOSYS;
+	}
+
+	desc = xencomm_map_no_alloc(arg, argsize);
+	if (desc == NULL)
+		return -EINVAL;
+
+	return xencomm_arch_hypercall_sched_op(cmd, desc);
+}
+EXPORT_SYMBOL_GPL(xencomm_hypercall_sched_op);
+
+int
+xencomm_hypercall_multicall(void *call_list, int nr_calls)
+{
+	int rc;
+	int i;
+	struct multicall_entry *mce;
+	struct xencomm_handle *desc;
+	XENCOMM_MINI_ALIGNED(xc_area, nr_calls * 2);
+
+	for (i = 0; i < nr_calls; i++) {
+		mce = (struct multicall_entry *)call_list + i;
+
+		switch (mce->op) {
+		case __HYPERVISOR_update_va_mapping:
+		case __HYPERVISOR_mmu_update:
+			/* No-op on ia64.  */
+			break;
+		case __HYPERVISOR_grant_table_op:
+			rc = xencommize_grant_table_op
+				(&xc_area,
+				 mce->args[0], (void *)mce->args[1],
+				 mce->args[2], &desc);
+			if (rc)
+				return rc;
+			mce->args[1] = (unsigned long)desc;
+			break;
+		case __HYPERVISOR_memory_op:
+		default:
+			printk(KERN_DEBUG
+			       "%s: unhandled multicall op entry op %lu\n",
+			       __func__, mce->op);
+			return -ENOSYS;
+		}
+	}
+
+	desc = xencomm_map_no_alloc(call_list,
+				    nr_calls * sizeof(struct multicall_entry));
+	if (desc == NULL)
+		return -EINVAL;
+
+	return xencomm_arch_hypercall_multicall(desc, nr_calls);
+}
+EXPORT_SYMBOL_GPL(xencomm_hypercall_multicall);
+
+int
+xencomm_hypercall_callback_op(int cmd, void *arg)
+{
+	unsigned int argsize;
+	switch (cmd) {
+	case CALLBACKOP_register:
+		argsize = sizeof(struct callback_register);
+		break;
+	case CALLBACKOP_unregister:
+		argsize = sizeof(struct callback_unregister);
+		break;
+	default:
+		printk(KERN_DEBUG
+		       "%s: unknown callback op %d\n", __func__, cmd);
+		return -ENOSYS;
+	}
+
+	return xencomm_arch_hypercall_callback_op
+		(cmd, xencomm_map_no_alloc(arg, argsize));
+}
+
+static int
+xencommize_memory_reservation(struct xencomm_mini *xc_area,
+			      struct xen_memory_reservation *mop)
+{
+	struct xencomm_handle *desc;
+
+	desc = __xencomm_map_no_alloc(xen_guest_handle(mop->extent_start),
+			mop->nr_extents *
+			sizeof(*xen_guest_handle(mop->extent_start)),
+			xc_area);
+	if (desc == NULL)
+		return -EINVAL;
+
+	set_xen_guest_handle(mop->extent_start, (void *)desc);
+	return 0;
+}
+
+int
+xencomm_hypercall_memory_op(unsigned int cmd, void *arg)
+{
+	GUEST_HANDLE(xen_pfn_t) extent_start_va[2] = { {NULL}, {NULL} };
+	struct xen_memory_reservation *xmr = NULL;
+	int rc;
+	struct xencomm_handle *desc;
+	unsigned int argsize;
+	XENCOMM_MINI_ALIGNED(xc_area, 2);
+
+	switch (cmd) {
+	case XENMEM_increase_reservation:
+	case XENMEM_decrease_reservation:
+	case XENMEM_populate_physmap:
+		xmr = (struct xen_memory_reservation *)arg;
+		set_xen_guest_handle(extent_start_va[0],
+				     xen_guest_handle(xmr->extent_start));
+
+		argsize = sizeof(*xmr);
+		rc = xencommize_memory_reservation(xc_area, xmr);
+		if (rc)
+			return rc;
+		xc_area++;
+		break;
+
+	case XENMEM_maximum_ram_page:
+		argsize = 0;
+		break;
+
+	case XENMEM_add_to_physmap:
+		argsize = sizeof(struct xen_add_to_physmap);
+		break;
+
+	default:
+		printk(KERN_DEBUG "%s: unknown memory op %d\n", __func__, cmd);
+		return -ENOSYS;
+	}
+
+	desc = xencomm_map_no_alloc(arg, argsize);
+	if (desc == NULL)
+		return -EINVAL;
+
+	rc = xencomm_arch_hypercall_memory_op(cmd, desc);
+
+	switch (cmd) {
+	case XENMEM_increase_reservation:
+	case XENMEM_decrease_reservation:
+	case XENMEM_populate_physmap:
+		set_xen_guest_handle(xmr->extent_start,
+				     xen_guest_handle(extent_start_va[0]));
+		break;
+	}
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(xencomm_hypercall_memory_op);
+
+int
+xencomm_hypercall_suspend(unsigned long srec)
+{
+	struct sched_shutdown arg;
+
+	arg.reason = SHUTDOWN_suspend;
+
+	return xencomm_arch_hypercall_sched_op(
+		SCHEDOP_shutdown, xencomm_map_no_alloc(&arg, sizeof(arg)));
+}
+
+long
+xencomm_hypercall_vcpu_op(int cmd, int cpu, void *arg)
+{
+	unsigned int argsize;
+	switch (cmd) {
+	case VCPUOP_register_runstate_memory_area: {
+		struct vcpu_register_runstate_memory_area *area =
+			(struct vcpu_register_runstate_memory_area *)arg;
+		argsize = sizeof(*arg);
+		set_xen_guest_handle(area->addr.h,
+		     (void *)xencomm_map_no_alloc(area->addr.v,
+						  sizeof(area->addr.v)));
+		break;
+	}
+
+	default:
+		printk(KERN_DEBUG "%s: unknown vcpu op %d\n", __func__, cmd);
+		return -ENOSYS;
+	}
+
+	return xencomm_arch_hypercall_vcpu_op(cmd, cpu,
+					xencomm_map_no_alloc(arg, argsize));
+}
+
+long
+xencomm_hypercall_opt_feature(void *arg)
+{
+	return xencomm_arch_hypercall_opt_feature(
+		xencomm_map_no_alloc(arg,
+				     sizeof(struct xen_ia64_opt_feature)));
+}
diff --git a/arch/ia64/xen/xen_pv_ops.c b/arch/ia64/xen/xen_pv_ops.c
new file mode 100644
index 0000000..04cd123
--- /dev/null
+++ b/arch/ia64/xen/xen_pv_ops.c
@@ -0,0 +1,364 @@
+/******************************************************************************
+ * arch/ia64/xen/xen_pv_ops.c
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/console.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/pm.h>
+
+#include <asm/xen/hypervisor.h>
+#include <asm/xen/xencomm.h>
+#include <asm/xen/privop.h>
+
+#include "irq_xen.h"
+#include "time.h"
+
+/***************************************************************************
+ * general info
+ */
+static struct pv_info xen_info __initdata = {
+	.kernel_rpl = 2,	/* or 1: determin at runtime */
+	.paravirt_enabled = 1,
+	.name = "Xen/ia64",
+};
+
+#define IA64_RSC_PL_SHIFT	2
+#define IA64_RSC_PL_BIT_SIZE	2
+#define IA64_RSC_PL_MASK	\
+	(((1UL << IA64_RSC_PL_BIT_SIZE) - 1) << IA64_RSC_PL_SHIFT)
+
+static void __init
+xen_info_init(void)
+{
+	/* Xenified Linux/ia64 may run on pl = 1 or 2.
+	 * determin at run time. */
+	unsigned long rsc = ia64_getreg(_IA64_REG_AR_RSC);
+	unsigned int rpl = (rsc & IA64_RSC_PL_MASK) >> IA64_RSC_PL_SHIFT;
+	xen_info.kernel_rpl = rpl;
+}
+
+/***************************************************************************
+ * pv_init_ops
+ * initialization hooks.
+ */
+
+static void
+xen_panic_hypercall(struct unw_frame_info *info, void *arg)
+{
+	current->thread.ksp = (__u64)info->sw - 16;
+	HYPERVISOR_shutdown(SHUTDOWN_crash);
+	/* we're never actually going to get here... */
+}
+
+static int
+xen_panic_event(struct notifier_block *this, unsigned long event, void *ptr)
+{
+	unw_init_running(xen_panic_hypercall, NULL);
+	/* we're never actually going to get here... */
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block xen_panic_block = {
+	xen_panic_event, NULL, 0 /* try to go last */
+};
+
+static void xen_pm_power_off(void)
+{
+	local_irq_disable();
+	HYPERVISOR_shutdown(SHUTDOWN_poweroff);
+}
+
+static void __init
+xen_banner(void)
+{
+	printk(KERN_INFO
+	       "Running on Xen! pl = %d start_info_pfn=0x%lx nr_pages=%ld "
+	       "flags=0x%x\n",
+	       xen_info.kernel_rpl,
+	       HYPERVISOR_shared_info->arch.start_info_pfn,
+	       xen_start_info->nr_pages, xen_start_info->flags);
+}
+
+static int __init
+xen_reserve_memory(struct rsvd_region *region)
+{
+	region->start = (unsigned long)__va(
+		(HYPERVISOR_shared_info->arch.start_info_pfn << PAGE_SHIFT));
+	region->end   = region->start + PAGE_SIZE;
+	return 1;
+}
+
+static void __init
+xen_arch_setup_early(void)
+{
+	struct shared_info *s;
+	BUG_ON(!xen_pv_domain());
+
+	s = HYPERVISOR_shared_info;
+	xen_start_info = __va(s->arch.start_info_pfn << PAGE_SHIFT);
+
+	/* Must be done before any hypercall.  */
+	xencomm_initialize();
+
+	xen_setup_features();
+	/* Register a call for panic conditions. */
+	atomic_notifier_chain_register(&panic_notifier_list,
+				       &xen_panic_block);
+	pm_power_off = xen_pm_power_off;
+
+	xen_ia64_enable_opt_feature();
+}
+
+static void __init
+xen_arch_setup_console(char **cmdline_p)
+{
+	add_preferred_console("xenboot", 0, NULL);
+	add_preferred_console("tty", 0, NULL);
+	/* use hvc_xen */
+	add_preferred_console("hvc", 0, NULL);
+
+#if !defined(CONFIG_VT) || !defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = NULL;
+#endif
+}
+
+static int __init
+xen_arch_setup_nomca(void)
+{
+	return 1;
+}
+
+static void __init
+xen_post_smp_prepare_boot_cpu(void)
+{
+	xen_setup_vcpu_info_placement();
+}
+
+static const struct pv_init_ops xen_init_ops __initdata = {
+	.banner = xen_banner,
+
+	.reserve_memory = xen_reserve_memory,
+
+	.arch_setup_early = xen_arch_setup_early,
+	.arch_setup_console = xen_arch_setup_console,
+	.arch_setup_nomca = xen_arch_setup_nomca,
+
+	.post_smp_prepare_boot_cpu = xen_post_smp_prepare_boot_cpu,
+};
+
+/***************************************************************************
+ * pv_cpu_ops
+ * intrinsics hooks.
+ */
+
+static void xen_setreg(int regnum, unsigned long val)
+{
+	switch (regnum) {
+	case _IA64_REG_AR_KR0 ... _IA64_REG_AR_KR7:
+		xen_set_kr(regnum - _IA64_REG_AR_KR0, val);
+		break;
+#ifdef CONFIG_IA32_SUPPORT
+	case _IA64_REG_AR_EFLAG:
+		xen_set_eflag(val);
+		break;
+#endif
+	case _IA64_REG_CR_TPR:
+		xen_set_tpr(val);
+		break;
+	case _IA64_REG_CR_ITM:
+		xen_set_itm(val);
+		break;
+	case _IA64_REG_CR_EOI:
+		xen_eoi(val);
+		break;
+	default:
+		ia64_native_setreg_func(regnum, val);
+		break;
+	}
+}
+
+static unsigned long xen_getreg(int regnum)
+{
+	unsigned long res;
+
+	switch (regnum) {
+	case _IA64_REG_PSR:
+		res = xen_get_psr();
+		break;
+#ifdef CONFIG_IA32_SUPPORT
+	case _IA64_REG_AR_EFLAG:
+		res = xen_get_eflag();
+		break;
+#endif
+	case _IA64_REG_CR_IVR:
+		res = xen_get_ivr();
+		break;
+	case _IA64_REG_CR_TPR:
+		res = xen_get_tpr();
+		break;
+	default:
+		res = ia64_native_getreg_func(regnum);
+		break;
+	}
+	return res;
+}
+
+/* turning on interrupts is a bit more complicated.. write to the
+ * memory-mapped virtual psr.i bit first (to avoid race condition),
+ * then if any interrupts were pending, we have to execute a hyperprivop
+ * to ensure the pending interrupt gets delivered; else we're done! */
+static void
+xen_ssm_i(void)
+{
+	int old = xen_get_virtual_psr_i();
+	xen_set_virtual_psr_i(1);
+	barrier();
+	if (!old && xen_get_virtual_pend())
+		xen_hyper_ssm_i();
+}
+
+/* turning off interrupts can be paravirtualized simply by writing
+ * to a memory-mapped virtual psr.i bit (implemented as a 16-bit bool) */
+static void
+xen_rsm_i(void)
+{
+	xen_set_virtual_psr_i(0);
+	barrier();
+}
+
+static unsigned long
+xen_get_psr_i(void)
+{
+	return xen_get_virtual_psr_i() ? IA64_PSR_I : 0;
+}
+
+static void
+xen_intrin_local_irq_restore(unsigned long mask)
+{
+	if (mask & IA64_PSR_I)
+		xen_ssm_i();
+	else
+		xen_rsm_i();
+}
+
+static const struct pv_cpu_ops xen_cpu_ops __initdata = {
+	.fc		= xen_fc,
+	.thash		= xen_thash,
+	.get_cpuid	= xen_get_cpuid,
+	.get_pmd	= xen_get_pmd,
+	.getreg		= xen_getreg,
+	.setreg		= xen_setreg,
+	.ptcga		= xen_ptcga,
+	.get_rr		= xen_get_rr,
+	.set_rr		= xen_set_rr,
+	.set_rr0_to_rr4	= xen_set_rr0_to_rr4,
+	.ssm_i		= xen_ssm_i,
+	.rsm_i		= xen_rsm_i,
+	.get_psr_i	= xen_get_psr_i,
+	.intrin_local_irq_restore
+			= xen_intrin_local_irq_restore,
+};
+
+/******************************************************************************
+ * replacement of hand written assembly codes.
+ */
+
+extern char xen_switch_to;
+extern char xen_leave_syscall;
+extern char xen_work_processed_syscall;
+extern char xen_leave_kernel;
+
+const struct pv_cpu_asm_switch xen_cpu_asm_switch = {
+	.switch_to		= (unsigned long)&xen_switch_to,
+	.leave_syscall		= (unsigned long)&xen_leave_syscall,
+	.work_processed_syscall	= (unsigned long)&xen_work_processed_syscall,
+	.leave_kernel		= (unsigned long)&xen_leave_kernel,
+};
+
+/***************************************************************************
+ * pv_iosapic_ops
+ * iosapic read/write hooks.
+ */
+static void
+xen_pcat_compat_init(void)
+{
+	/* nothing */
+}
+
+static struct irq_chip*
+xen_iosapic_get_irq_chip(unsigned long trigger)
+{
+	return NULL;
+}
+
+static unsigned int
+xen_iosapic_read(char __iomem *iosapic, unsigned int reg)
+{
+	struct physdev_apic apic_op;
+	int ret;
+
+	apic_op.apic_physbase = (unsigned long)iosapic -
+					__IA64_UNCACHED_OFFSET;
+	apic_op.reg = reg;
+	ret = HYPERVISOR_physdev_op(PHYSDEVOP_apic_read, &apic_op);
+	if (ret)
+		return ret;
+	return apic_op.value;
+}
+
+static void
+xen_iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
+{
+	struct physdev_apic apic_op;
+
+	apic_op.apic_physbase = (unsigned long)iosapic -
+					__IA64_UNCACHED_OFFSET;
+	apic_op.reg = reg;
+	apic_op.value = val;
+	HYPERVISOR_physdev_op(PHYSDEVOP_apic_write, &apic_op);
+}
+
+static const struct pv_iosapic_ops xen_iosapic_ops __initdata = {
+	.pcat_compat_init = xen_pcat_compat_init,
+	.__get_irq_chip = xen_iosapic_get_irq_chip,
+
+	.__read = xen_iosapic_read,
+	.__write = xen_iosapic_write,
+};
+
+/***************************************************************************
+ * pv_ops initialization
+ */
+
+void __init
+xen_setup_pv_ops(void)
+{
+	xen_info_init();
+	pv_info = xen_info;
+	pv_init_ops = xen_init_ops;
+	pv_cpu_ops = xen_cpu_ops;
+	pv_iosapic_ops = xen_iosapic_ops;
+	pv_irq_ops = xen_irq_ops;
+	pv_time_ops = xen_time_ops;
+
+	paravirt_cpu_asm_init(&xen_cpu_asm_switch);
+}
diff --git a/arch/ia64/xen/xencomm.c b/arch/ia64/xen/xencomm.c
new file mode 100644
index 0000000..1f5d7ac
--- /dev/null
+++ b/arch/ia64/xen/xencomm.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2006 Hollis Blanchard <hollisb@us.ibm.com>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/mm.h>
+
+static unsigned long kernel_virtual_offset;
+static int is_xencomm_initialized;
+
+/* for xen early printk. It uses console io hypercall which uses xencomm.
+ * However early printk may use it before xencomm initialization.
+ */
+int
+xencomm_is_initialized(void)
+{
+	return is_xencomm_initialized;
+}
+
+void
+xencomm_initialize(void)
+{
+	kernel_virtual_offset = KERNEL_START - ia64_tpa(KERNEL_START);
+	is_xencomm_initialized = 1;
+}
+
+/* Translate virtual address to physical address.  */
+unsigned long
+xencomm_vtop(unsigned long vaddr)
+{
+	struct page *page;
+	struct vm_area_struct *vma;
+
+	if (vaddr == 0)
+		return 0UL;
+
+	if (REGION_NUMBER(vaddr) == 5) {
+		pgd_t *pgd;
+		pud_t *pud;
+		pmd_t *pmd;
+		pte_t *ptep;
+
+		/* On ia64, TASK_SIZE refers to current.  It is not initialized
+		   during boot.
+		   Furthermore the kernel is relocatable and __pa() doesn't
+		   work on  addresses.  */
+		if (vaddr >= KERNEL_START
+		    && vaddr < (KERNEL_START + KERNEL_TR_PAGE_SIZE))
+			return vaddr - kernel_virtual_offset;
+
+		/* In kernel area -- virtually mapped.  */
+		pgd = pgd_offset_k(vaddr);
+		if (pgd_none(*pgd) || pgd_bad(*pgd))
+			return ~0UL;
+
+		pud = pud_offset(pgd, vaddr);
+		if (pud_none(*pud) || pud_bad(*pud))
+			return ~0UL;
+
+		pmd = pmd_offset(pud, vaddr);
+		if (pmd_none(*pmd) || pmd_bad(*pmd))
+			return ~0UL;
+
+		ptep = pte_offset_kernel(pmd, vaddr);
+		if (!ptep)
+			return ~0UL;
+
+		return (pte_val(*ptep) & _PFN_MASK) | (vaddr & ~PAGE_MASK);
+	}
+
+	if (vaddr > TASK_SIZE) {
+		/* percpu variables */
+		if (REGION_NUMBER(vaddr) == 7 &&
+		    REGION_OFFSET(vaddr) >= (1ULL << IA64_MAX_PHYS_BITS))
+			ia64_tpa(vaddr);
+
+		/* kernel address */
+		return __pa(vaddr);
+	}
+
+	/* XXX double-check (lack of) locking */
+	vma = find_extend_vma(current->mm, vaddr);
+	if (!vma)
+		return ~0UL;
+
+	/* We assume the page is modified.  */
+	page = follow_page(vma, vaddr, FOLL_WRITE | FOLL_TOUCH);
+	if (!page)
+		return ~0UL;
+
+	return (page_to_pfn(page) << PAGE_SHIFT) | (vaddr & ~PAGE_MASK);
+}
diff --git a/arch/ia64/xen/xenivt.S b/arch/ia64/xen/xenivt.S
new file mode 100644
index 0000000..3e71d50
--- /dev/null
+++ b/arch/ia64/xen/xenivt.S
@@ -0,0 +1,52 @@
+/*
+ * arch/ia64/xen/ivt.S
+ *
+ * Copyright (C) 2005 Hewlett-Packard Co
+ *	Dan Magenheimer <dan.magenheimer@hp.com>
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *                    pv_ops.
+ */
+
+#include <asm/asmmacro.h>
+#include <asm/kregs.h>
+#include <asm/pgtable.h>
+
+#include "../kernel/minstate.h"
+
+	.section .text,"ax"
+GLOBAL_ENTRY(xen_event_callback)
+	mov r31=pr		// prepare to save predicates
+	;;
+	SAVE_MIN_WITH_COVER	// uses r31; defines r2 and r3
+	;;
+	movl r3=XSI_PSR_IC
+	mov r14=1
+	;;
+	st4 [r3]=r14
+	;;
+	adds r3=8,r2		// set up second base pointer for SAVE_REST
+	srlz.i			// ensure everybody knows psr.ic is back on
+	;;
+	SAVE_REST
+	;;
+1:
+	alloc r14=ar.pfs,0,0,1,0 // must be first in an insn group
+	add out0=16,sp		// pass pointer to pt_regs as first arg
+	;;
+	br.call.sptk.many b0=xen_evtchn_do_upcall
+	;;
+	movl r20=XSI_PSR_I_ADDR
+	;;
+	ld8 r20=[r20]
+	;;
+	adds r20=-1,r20		// vcpu_info->evtchn_upcall_pending
+	;;
+	ld1 r20=[r20]
+	;;
+	cmp.ne p6,p0=r20,r0	// if there are pending events,
+	(p6) br.spnt.few 1b	// call evtchn_do_upcall again.
+	br.sptk.many xen_leave_kernel	// we know ia64_leave_kernel is
+					// paravirtualized as xen_leave_kernel
+END(xen_event_callback)
diff --git a/arch/ia64/xen/xensetup.S b/arch/ia64/xen/xensetup.S
new file mode 100644
index 0000000..28fed1f
--- /dev/null
+++ b/arch/ia64/xen/xensetup.S
@@ -0,0 +1,83 @@
+/*
+ * Support routines for Xen
+ *
+ * Copyright (C) 2005 Dan Magenheimer <dan.magenheimer@hp.com>
+ */
+
+#include <asm/processor.h>
+#include <asm/asmmacro.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/paravirt.h>
+#include <asm/xen/privop.h>
+#include <linux/elfnote.h>
+#include <linux/init.h>
+#include <xen/interface/elfnote.h>
+
+	.section .data.read_mostly
+	.align 8
+	.global xen_domain_type
+xen_domain_type:
+	data4 XEN_NATIVE_ASM
+	.previous
+
+	__INIT
+ENTRY(startup_xen)
+	// Calculate load offset.
+	// The constant, LOAD_OFFSET, can't be used because the boot
+	// loader doesn't always load to the LMA specified by the vmlinux.lds.
+	mov r9=ip	// must be the first instruction to make sure
+			// that r9 = the physical address of startup_xen.
+			// Usually r9 = startup_xen - LOAD_OFFSET
+	movl r8=startup_xen
+	;;
+	sub r9=r9,r8	// Usually r9 = -LOAD_OFFSET.
+
+	mov r10=PARAVIRT_HYPERVISOR_TYPE_XEN
+	movl r11=_start
+	;;
+	add r11=r11,r9
+	movl r8=hypervisor_type
+	;;
+	add r8=r8,r9
+	mov b0=r11
+	;;
+	st8 [r8]=r10
+	br.cond.sptk.many b0
+	;;
+END(startup_xen)
+
+	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS,	.asciz "linux")
+	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION,	.asciz "2.6")
+	ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION,	.asciz "xen-3.0")
+	ELFNOTE(Xen, XEN_ELFNOTE_ENTRY,		data8.ua startup_xen - LOAD_OFFSET)
+
+#define isBP	p3	// are we the Bootstrap Processor?
+
+	.text
+
+GLOBAL_ENTRY(xen_setup_hook)
+	mov r8=XEN_PV_DOMAIN_ASM
+(isBP)	movl r9=xen_domain_type;;
+(isBP)	st4 [r9]=r8
+	movl r10=xen_ivt;;
+
+	mov cr.iva=r10
+
+	/* Set xsi base.  */
+#define FW_HYPERCALL_SET_SHARED_INFO_VA			0x600
+(isBP)	mov r2=FW_HYPERCALL_SET_SHARED_INFO_VA
+(isBP)	movl r28=XSI_BASE;;
+(isBP)	break 0x1000;;
+
+	/* setup pv_ops */
+(isBP)	mov r4=rp
+	;;
+(isBP)	br.call.sptk.many rp=xen_setup_pv_ops
+	;;
+(isBP)	mov rp=r4
+	;;
+
+	br.ret.sptk.many rp
+	;;
+END(xen_setup_hook)
diff --git a/arch/m32r/oprofile/init.c b/arch/m32r/oprofile/init.c
index b7773e4..fa56860 100644
--- a/arch/m32r/oprofile/init.c
+++ b/arch/m32r/oprofile/init.c
@@ -12,7 +12,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 
-int __init oprofile_arch_init(struct oprofile_operations * ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
 	return -ENODEV;
 }
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 0a3f9e8..ab9862c 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
+#include <linux/seq_file.h>
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/rtc.h>
@@ -93,7 +94,7 @@
 
 static void amiga_sched_init(irq_handler_t handler);
 static void amiga_get_model(char *model);
-static int amiga_get_hardware_list(char *buffer);
+static void amiga_get_hardware_list(struct seq_file *m);
 /* amiga specific timer functions */
 static unsigned long amiga_gettimeoffset(void);
 static int a3000_hwclk(int, struct rtc_time *);
@@ -911,13 +912,11 @@
 }
 
 
-static int amiga_get_hardware_list(char *buffer)
+static void amiga_get_hardware_list(struct seq_file *m)
 {
-	int len = 0;
-
 	if (AMIGAHW_PRESENT(CHIP_RAM))
-		len += sprintf(buffer+len, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
-	len += sprintf(buffer+len, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
+		seq_printf(m, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
+	seq_printf(m, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
 			amiga_psfreq, amiga_eclock);
 	if (AMIGAHW_PRESENT(AMI_VIDEO)) {
 		char *type;
@@ -935,14 +934,14 @@
 			type = "Old or Unknown";
 			break;
 		}
-		len += sprintf(buffer+len, "Graphics:\t%s\n", type);
+		seq_printf(m, "Graphics:\t%s\n", type);
 	}
 
 #define AMIGAHW_ANNOUNCE(name, str)			\
 	if (AMIGAHW_PRESENT(name))			\
-		len += sprintf (buffer+len, "\t%s\n", str)
+		seq_printf (m, "\t%s\n", str)
 
-	len += sprintf (buffer + len, "Detected hardware:\n");
+	seq_printf (m, "Detected hardware:\n");
 
 	AMIGAHW_ANNOUNCE(AMI_VIDEO, "Amiga Video");
 	AMIGAHW_ANNOUNCE(AMI_BLITTER, "Blitter");
@@ -975,15 +974,13 @@
 	AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA Slot");
 #ifdef CONFIG_ZORRO
 	if (AMIGAHW_PRESENT(ZORRO))
-		len += sprintf(buffer+len, "\tZorro II%s AutoConfig: %d Expansion "
+		seq_printf(m, "\tZorro II%s AutoConfig: %d Expansion "
 				"Device%s\n",
 				AMIGAHW_PRESENT(ZORRO3) ? "I" : "",
 				zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
 #endif /* CONFIG_ZORRO */
 
 #undef AMIGAHW_ANNOUNCE
-
-	return len;
 }
 
 /*
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index af03185..49c28cd 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -26,6 +26,7 @@
 
 #include <linux/types.h>
 #include <linux/mm.h>
+#include <linux/seq_file.h>
 #include <linux/console.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -63,7 +64,7 @@
 /* local function prototypes */
 static void atari_reset(void);
 static void atari_get_model(char *model);
-static int atari_get_hardware_list(char *buffer);
+static void atari_get_hardware_list(struct seq_file *m);
 
 /* atari specific irq functions */
 extern void atari_init_IRQ (void);
@@ -611,21 +612,21 @@
 }
 
 
-static int atari_get_hardware_list(char *buffer)
+static void atari_get_hardware_list(struct seq_file *m)
 {
-	int len = 0, i;
+	int i;
 
 	for (i = 0; i < m68k_num_memory; i++)
-		len += sprintf(buffer+len, "\t%3ld MB at 0x%08lx (%s)\n",
+		seq_printf(m, "\t%3ld MB at 0x%08lx (%s)\n",
 				m68k_memory[i].size >> 20, m68k_memory[i].addr,
 				(m68k_memory[i].addr & 0xff000000 ?
 				 "alternate RAM" : "ST-RAM"));
 
 #define ATARIHW_ANNOUNCE(name, str)			\
 	if (ATARIHW_PRESENT(name))			\
-		len += sprintf(buffer + len, "\t%s\n", str)
+		seq_printf(m, "\t%s\n", str)
 
-	len += sprintf(buffer + len, "Detected hardware:\n");
+	seq_printf(m, "Detected hardware:\n");
 	ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter");
 	ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter");
 	ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter");
@@ -654,6 +655,4 @@
 	ATARIHW_ANNOUNCE(BLITTER, "Blitter");
 	ATARIHW_ANNOUNCE(VME, "VME Bus");
 	ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
-
-	return len;
 }
diff --git a/arch/m68k/atari/stram.c b/arch/m68k/atari/stram.c
index 04c69ff..6ec3b7f 100644
--- a/arch/m68k/atari/stram.c
+++ b/arch/m68k/atari/stram.c
@@ -42,6 +42,7 @@
 /* abbrev for the && above... */
 #define DO_PROC
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #endif
 
 /*
@@ -323,19 +324,16 @@
 
 #ifdef DO_PROC
 
-#define	PRINT_PROC(fmt,args...) len += sprintf( buf+len, fmt, ##args )
+#define	PRINT_PROC(fmt,args...) seq_printf( m, fmt, ##args )
 
-int get_stram_list( char *buf )
+static int stram_proc_show(struct seq_file *m, void *v)
 {
-	int len = 0;
 	BLOCK *p;
 
 	PRINT_PROC("Total ST-RAM:      %8u kB\n",
 			   (stram_end - stram_start) >> 10);
 	PRINT_PROC( "Allocated regions:\n" );
 	for( p = alloc_list; p; p = p->next ) {
-		if (len + 50 >= PAGE_SIZE)
-			break;
 		PRINT_PROC("0x%08lx-0x%08lx: %s (",
 			   virt_to_phys(p->start),
 			   virt_to_phys(p->start+p->size-1),
@@ -346,9 +344,27 @@
 			PRINT_PROC( "??)\n" );
 	}
 
-	return( len );
+	return 0;
 }
 
+static int stram_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, stram_proc_show, NULL);
+}
+
+static const struct file_operations stram_proc_fops = {
+	.open		= stram_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_stram_init(void)
+{
+	proc_create("stram", 0, NULL, &stram_proc_fops);
+	return 0;
+}
+module_init(proc_stram_init);
 #endif
 
 
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 65c9204..c072595 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -38,7 +38,6 @@
 #include <asm/bvme6000hw.h>
 
 static void bvme6000_get_model(char *model);
-static int  bvme6000_get_hardware_list(char *buffer);
 extern void bvme6000_sched_init(irq_handler_t handler);
 extern unsigned long bvme6000_gettimeoffset (void);
 extern int bvme6000_hwclk (int, struct rtc_time *);
@@ -82,15 +81,6 @@
     sprintf(model, "BVME%d000", m68k_cputype == CPU_68060 ? 6 : 4);
 }
 
-
-/* No hardware options on BVME6000? */
-
-static int bvme6000_get_hardware_list(char *buffer)
-{
-    *buffer = '\0';
-    return 0;
-}
-
 /*
  * This function is called during kernel startup to initialize
  * the bvme6000 IRQ handling routines.
@@ -127,7 +117,6 @@
     mach_set_clock_mmss	 = bvme6000_set_clock_mmss;
     mach_reset		 = bvme6000_reset;
     mach_get_model       = bvme6000_get_model;
-    mach_get_hardware_list = bvme6000_get_hardware_list;
 
     printk ("Board is %sconfigured as a System Controller\n",
 		*config_reg_ptr & BVME_CONFIG_SW1 ? "" : "not ");
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index ea1e44d..4d97bd2 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -20,6 +20,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/module.h>
 #include <linux/initrd.h>
@@ -80,7 +81,7 @@
 /* machine dependent irq functions */
 void (*mach_init_IRQ) (void) __initdata = NULL;
 void (*mach_get_model) (char *model);
-int (*mach_get_hardware_list) (char *buffer);
+void (*mach_get_hardware_list) (struct seq_file *m);
 /* machine dependent timer functions */
 unsigned long (*mach_gettimeoffset) (void);
 int (*mach_hwclk) (int, struct rtc_time*);
@@ -467,9 +468,9 @@
 	.show	= show_cpuinfo,
 };
 
-int get_hardware_list(char *buffer)
+#ifdef CONFIG_PROC_HARDWARE
+static int hardware_proc_show(struct seq_file *m, void *v)
 {
-	int len = 0;
 	char model[80];
 	unsigned long mem;
 	int i;
@@ -479,17 +480,37 @@
 	else
 		strcpy(model, "Unknown m68k");
 
-	len += sprintf(buffer + len, "Model:\t\t%s\n", model);
+	seq_printf(m, "Model:\t\t%s\n", model);
 	for (mem = 0, i = 0; i < m68k_num_memory; i++)
 		mem += m68k_memory[i].size;
-	len += sprintf(buffer + len, "System Memory:\t%ldK\n", mem >> 10);
+	seq_printf(m, "System Memory:\t%ldK\n", mem >> 10);
 
 	if (mach_get_hardware_list)
-		len += mach_get_hardware_list(buffer + len);
+		mach_get_hardware_list(m);
 
-	return len;
+	return 0;
 }
 
+static int hardware_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, hardware_proc_show, NULL);
+}
+
+static const struct file_operations hardware_proc_fops = {
+	.open		= hardware_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_hardware_init(void)
+{
+	proc_create("hardware", 0, NULL, &hardware_proc_fops);
+	return 0;
+}
+module_init(proc_hardware_init);
+#endif
+
 void check_bugs(void)
 {
 #ifndef CONFIG_M68KFPU_EMU
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index 92fe507..43cdf47 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -37,7 +37,6 @@
 
 
 static void mvme147_get_model(char *model);
-static int  mvme147_get_hardware_list(char *buffer);
 extern void mvme147_sched_init(irq_handler_t handler);
 extern unsigned long mvme147_gettimeoffset (void);
 extern int mvme147_hwclk (int, struct rtc_time *);
@@ -76,14 +75,6 @@
 	sprintf(model, "Motorola MVME147");
 }
 
-
-static int mvme147_get_hardware_list(char *buffer)
-{
-	*buffer = '\0';
-
-	return 0;
-}
-
 /*
  * This function is called during kernel startup to initialize
  * the mvme147 IRQ handling routines.
@@ -104,7 +95,6 @@
 	mach_set_clock_mmss	= mvme147_set_clock_mmss;
 	mach_reset		= mvme147_reset;
 	mach_get_model		= mvme147_get_model;
-	mach_get_hardware_list	= mvme147_get_hardware_list;
 
 	/* Board type is only set by newer versions of vmelilo/tftplilo */
 	if (!vme_brdtype)
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index 24cbc30..1521826 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -17,6 +17,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
+#include <linux/seq_file.h>
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/linkage.h>
@@ -42,7 +43,6 @@
 static MK48T08ptr_t volatile rtc = (MK48T08ptr_t)MVME_RTC_BASE;
 
 static void mvme16x_get_model(char *model);
-static int  mvme16x_get_hardware_list(char *buffer);
 extern void mvme16x_sched_init(irq_handler_t handler);
 extern unsigned long mvme16x_gettimeoffset (void);
 extern int mvme16x_hwclk (int, struct rtc_time *);
@@ -93,26 +93,21 @@
 }
 
 
-static int mvme16x_get_hardware_list(char *buffer)
+static void mvme16x_get_hardware_list(struct seq_file *m)
 {
     p_bdid p = &mvme_bdid;
-    int len = 0;
 
     if (p->brdno == 0x0162 || p->brdno == 0x0172)
     {
 	unsigned char rev = *(unsigned char *)MVME162_VERSION_REG;
 
-	len += sprintf (buffer+len, "VMEchip2        %spresent\n",
+	seq_printf (m, "VMEchip2        %spresent\n",
 			rev & MVME16x_CONFIG_NO_VMECHIP2 ? "NOT " : "");
-	len += sprintf (buffer+len, "SCSI interface  %spresent\n",
+	seq_printf (m, "SCSI interface  %spresent\n",
 			rev & MVME16x_CONFIG_NO_SCSICHIP ? "NOT " : "");
-	len += sprintf (buffer+len, "Ethernet i/f    %spresent\n",
+	seq_printf (m, "Ethernet i/f    %spresent\n",
 			rev & MVME16x_CONFIG_NO_ETHERNET ? "NOT " : "");
     }
-    else
-	*buffer = '\0';
-
-    return (len);
 }
 
 /*
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 9c7eefa..7110546 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -39,7 +39,6 @@
 extern irqreturn_t q40_process_int(int level, struct pt_regs *regs);
 extern void q40_init_IRQ(void);
 static void q40_get_model(char *model);
-static int  q40_get_hardware_list(char *buffer);
 extern void q40_sched_init(irq_handler_t handler);
 
 static unsigned long q40_gettimeoffset(void);
@@ -153,14 +152,6 @@
 	sprintf(model, "Q40");
 }
 
-/* No hardware options on Q40? */
-
-static int q40_get_hardware_list(char *buffer)
-{
-	*buffer = '\0';
-	return 0;
-}
-
 static unsigned int serports[] =
 {
 	0x3f8,0x2f8,0x3e8,0x2e8,0
@@ -191,7 +182,6 @@
 
 	mach_reset = q40_reset;
 	mach_get_model = q40_get_model;
-	mach_get_hardware_list = q40_get_hardware_list;
 
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
 	mach_beep = q40_mksound;
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index 732087d0..8dfaa20 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -11,6 +11,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
+#include <linux/seq_file.h>
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/init.h>
@@ -46,16 +47,9 @@
 extern unsigned long availmem;
 unsigned long num_pages;
 
-static int sun3_get_hardware_list(char *buffer)
+static void sun3_get_hardware_list(struct seq_file *m)
 {
-
-	int len = 0;
-
-	len += sprintf(buffer + len, "PROM Revision:\t%s\n",
-		       romvec->pv_monid);
-
-	return len;
-
+	seq_printf(m, "PROM Revision:\t%s\n", romvec->pv_monid);
 }
 
 void __init sun3_init(void)
diff --git a/arch/m68k/sun3x/config.c b/arch/m68k/sun3x/config.c
index 9878917..2b1ca2d 100644
--- a/arch/m68k/sun3x/config.c
+++ b/arch/m68k/sun3x/config.c
@@ -8,6 +8,7 @@
 
 #include <linux/types.h>
 #include <linux/mm.h>
+#include <linux/seq_file.h>
 #include <linux/console.h>
 #include <linux/init.h>
 
@@ -31,16 +32,9 @@
 
 }
 
-static int sun3x_get_hardware_list(char *buffer)
+static void sun3x_get_hardware_list(struct seq_file *m)
 {
-
-	int len = 0;
-
-	len += sprintf(buffer + len, "PROM Revision:\t%s\n",
-		       romvec->pv_monid);
-
-	return len;
-
+	seq_printf(m, "PROM Revision:\t%s\n", romvec->pv_monid);
 }
 
 /*
diff --git a/arch/mips/include/asm/txx9/tx4938.h b/arch/mips/include/asm/txx9/tx4938.h
index 989e775..0b06815 100644
--- a/arch/mips/include/asm/txx9/tx4938.h
+++ b/arch/mips/include/asm/txx9/tx4938.h
@@ -292,4 +292,17 @@
 void tx4938_irq_init(void);
 void tx4938_mtd_init(int ch);
 
+struct tx4938ide_platform_info {
+	/*
+	 * I/O port shift, for platforms with ports that are
+	 * constantly spaced and need larger than the 1-byte
+	 * spacing used by ata_std_ports().
+	 */
+	unsigned int ioport_shift;
+	unsigned int gbus_clock;	/*  0 means no PIO mode tuning. */
+	unsigned int ebus_ch;
+};
+
+void tx4938_ata_init(unsigned int irq, unsigned int shift, int tune);
+
 #endif
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index dd2fbd6..3bf3354 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -32,7 +32,7 @@
         return 0;
 }
 
-static int op_mips_create_files(struct super_block * sb, struct dentry * root)
+static int op_mips_create_files(struct super_block *sb, struct dentry *root)
 {
 	int i;
 
diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h
index 2bfc17c..f04b54f 100644
--- a/arch/mips/oprofile/op_impl.h
+++ b/arch/mips/oprofile/op_impl.h
@@ -27,7 +27,7 @@
 /* Per-architecture configury and hooks.  */
 struct op_mips_model {
 	void (*reg_setup) (struct op_counter_config *);
-	void (*cpu_setup) (void * dummy);
+	void (*cpu_setup) (void *dummy);
 	int (*init)(void);
 	void (*exit)(void);
 	void (*cpu_start)(void *args);
diff --git a/arch/mips/oprofile/op_model_rm9000.c b/arch/mips/oprofile/op_model_rm9000.c
index a45d320..3aa8138 100644
--- a/arch/mips/oprofile/op_model_rm9000.c
+++ b/arch/mips/oprofile/op_model_rm9000.c
@@ -80,7 +80,7 @@
 	write_c0_perfcontrol(0);
 }
 
-static irqreturn_t rm9000_perfcount_handler(int irq, void * dev_id)
+static irqreturn_t rm9000_perfcount_handler(int irq, void *dev_id)
 {
 	unsigned int control = read_c0_perfcontrol();
 	struct pt_regs *regs = get_irq_regs();
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index af724e5..25819ff 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -16,6 +16,7 @@
 #include <linux/param.h>
 #include <linux/ptrace.h>
 #include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
 #include <asm/reboot.h>
 #include <asm/traps.h>
 #include <asm/txx9irq.h>
@@ -335,6 +336,52 @@
 	txx9_physmap_flash_init(ch, start, size, &pdata);
 }
 
+void __init tx4938_ata_init(unsigned int irq, unsigned int shift, int tune)
+{
+	struct platform_device *pdev;
+	struct resource res[] = {
+		{
+			/* .start and .end are filled in later */
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	struct tx4938ide_platform_info pdata = {
+		.ioport_shift = shift,
+		/*
+		 * The IDE driver should not change bus timings if other ISA
+		 * devices existed.
+		 */
+		.gbus_clock = tune ? txx9_gbus_clock : 0,
+	};
+	u64 ebccr;
+	int i;
+
+	if ((__raw_readq(&tx4938_ccfgptr->pcfg) &
+	     (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL))
+	    != TX4938_PCFG_ATA_SEL)
+		return;
+	for (i = 0; i < 8; i++) {
+		/* check EBCCRn.ISA, EBCCRn.BSZ, EBCCRn.ME */
+		ebccr = __raw_readq(&tx4938_ebuscptr->cr[i]);
+		if ((ebccr & 0x00f00008) == 0x00e00008)
+			break;
+	}
+	if (i == 8)
+		return;
+	pdata.ebus_ch = i;
+	res[0].start = ((ebccr >> 48) << 20) + 0x10000;
+	res[0].end = res[0].start + 0x20000 - 1;
+	pdev = platform_device_alloc("tx4938ide", -1);
+	if (!pdev ||
+	    platform_device_add_resources(pdev, res, ARRAY_SIZE(res)) ||
+	    platform_device_add_data(pdev, &pdata, sizeof(pdata)) ||
+	    platform_device_add(pdev))
+		platform_device_put(pdev);
+}
+
 static void __init tx4938_stop_unused_modules(void)
 {
 	__u64 pcfg, rst = 0, ckd = 0;
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index e077cc4..547ff29 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -352,6 +352,7 @@
 	rbtx4938_ne_init();
 	tx4938_wdt_init();
 	rbtx4938_mtd_init();
+	tx4938_ata_init(RBTX4938_IRQ_IOC_ATA, 0, 1);
 	txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL);
 }
 
diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c
index 12c04c5..bd9a4db3 100644
--- a/arch/parisc/hpux/fs.c
+++ b/arch/parisc/hpux/fs.c
@@ -127,9 +127,8 @@
 	buf.error = 0;
 
 	error = vfs_readdir(file, filldir, &buf);
-	if (error < 0)
-		goto out_putf;
-	error = buf.error;
+	if (error >= 0)
+		error = buf.error;
 	lastdirent = buf.previous;
 	if (lastdirent) {
 		if (put_user(file->f_pos, &lastdirent->d_off))
diff --git a/arch/parisc/oprofile/init.c b/arch/parisc/oprofile/init.c
index 113f513..026cba2 100644
--- a/arch/parisc/oprofile/init.c
+++ b/arch/parisc/oprofile/init.c
@@ -12,7 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/oprofile.h>
 
-int __init oprofile_arch_init(struct oprofile_operations * ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
 	return -ENODEV;
 }
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 9391199..5b15278 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -19,9 +19,6 @@
 	default 64 if PPC64
 	default 32 if !PPC64
 
-config PPC_MERGE
-	def_bool y
-
 config ARCH_PHYS_ADDR_T_64BIT
        def_bool PPC64 || PHYS_64BIT
 
@@ -326,13 +323,11 @@
 
 config CRASH_DUMP
 	bool "Build a kdump crash kernel"
-	depends on PPC_MULTIPLATFORM && PPC64
+	depends on PPC_MULTIPLATFORM && PPC64 && RELOCATABLE
 	help
 	  Build a kernel suitable for use as a kdump capture kernel.
-	  The kernel will be linked at a different address than normal, and
-	  so can only be used for Kdump.
-
-	  Don't change this unless you know what you are doing.
+	  The same kernel binary can be used as production kernel and dump
+	  capture kernel.
 
 config PHYP_DUMP
 	bool "Hypervisor-assisted dump (EXPERIMENTAL)"
@@ -832,11 +827,9 @@
 	default "0xc000000000000000"
 config KERNEL_START
 	hex
-	default "0xc000000002000000" if CRASH_DUMP
 	default "0xc000000000000000"
 config PHYSICAL_START
 	hex
-	default "0x02000000" if CRASH_DUMP
 	default "0x00000000"
 endif
 
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index aac1406..8fc6d72 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -68,7 +68,8 @@
 		fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
-		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c
+		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
+		cuboot-acadia.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -211,6 +212,7 @@
 # Board ports in arch/powerpc/platform/40x/Kconfig
 image-$(CONFIG_EP405)			+= dtbImage.ep405
 image-$(CONFIG_WALNUT)			+= treeImage.walnut
+image-$(CONFIG_ACADIA)			+= cuImage.acadia
 
 # Board ports in arch/powerpc/platform/44x/Kconfig
 image-$(CONFIG_EBONY)			+= treeImage.ebony cuImage.ebony
@@ -319,6 +321,9 @@
 $(obj)/uImage: vmlinux $(wrapperbits)
 	$(call if_changed,wrap,uboot)
 
+$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+
 $(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 	$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
 
diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c
index dcc9ab2..3091d1d 100644
--- a/arch/powerpc/boot/addnote.c
+++ b/arch/powerpc/boot/addnote.c
@@ -11,7 +11,7 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  *
- * Usage: addnote zImage [note.elf]
+ * Usage: addnote [-r realbase] zImage [note.elf]
  *
  * If note.elf is supplied, it is the name of an ELF file that contains
  * an RPA note to use instead of the built-in one.  Alternatively, the
@@ -153,18 +153,31 @@
 int
 main(int ac, char **av)
 {
-	int fd, n, i;
+	int fd, n, i, ai;
 	int ph, ps, np;
 	int nnote, nnote2, ns;
 	unsigned char *rpap;
+	char *p, *endp;
 
-	if (ac != 2 && ac != 3) {
-		fprintf(stderr, "Usage: %s elf-file [rpanote.elf]\n", av[0]);
+	ai = 1;
+	if (ac >= ai + 2 && strcmp(av[ai], "-r") == 0) {
+		/* process -r realbase */
+		p = av[ai + 1];
+		descr[1] = strtol(p, &endp, 16);
+		if (endp == p || *endp != 0) {
+			fprintf(stderr, "Can't parse -r argument '%s' as hex\n",
+				p);
+			exit(1);
+		}
+		ai += 2;
+	}
+	if (ac != ai + 1 && ac != ai + 2) {
+		fprintf(stderr, "Usage: %s [-r realbase] elf-file [rpanote.elf]\n", av[0]);
 		exit(1);
 	}
-	fd = open(av[1], O_RDWR);
+	fd = open(av[ai], O_RDWR);
 	if (fd < 0) {
-		perror(av[1]);
+		perror(av[ai]);
 		exit(1);
 	}
 
@@ -184,12 +197,12 @@
 	if (buf[E_IDENT+EI_CLASS] != ELFCLASS32
 	    || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) {
 		fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n",
-			av[1]);
+			av[ai]);
 		exit(1);
 	}
 
-	if (ac == 3)
-		rpap = read_rpanote(av[2], &nnote2);
+	if (ac == ai + 2)
+		rpap = read_rpanote(av[ai + 1], &nnote2);
 
 	ph = GET_32BE(buf, E_PHOFF);
 	ps = GET_16BE(buf, E_PHENTSIZE);
@@ -202,7 +215,7 @@
 	for (i = 0; i < np; ++i) {
 		if (GET_32BE(buf, ph + PH_TYPE) == PT_NOTE) {
 			fprintf(stderr, "%s already has a note entry\n",
-				av[1]);
+				av[ai]);
 			exit(0);
 		}
 		ph += ps;
@@ -260,18 +273,18 @@
 		exit(1);
 	}
 	if (i < n) {
-		fprintf(stderr, "%s: write truncated\n", av[1]);
+		fprintf(stderr, "%s: write truncated\n", av[ai]);
 		exit(1);
 	}
 
 	exit(0);
 
  notelf:
-	fprintf(stderr, "%s does not appear to be an ELF file\n", av[1]);
+	fprintf(stderr, "%s does not appear to be an ELF file\n", av[ai]);
 	exit(1);
 
  nospace:
 	fprintf(stderr, "sorry, I can't find space in %s to put the note\n",
-		av[1]);
+		av[ai]);
 	exit(1);
 }
diff --git a/arch/powerpc/boot/cuboot-52xx.c b/arch/powerpc/boot/cuboot-52xx.c
index a861154..4c42ec8 100644
--- a/arch/powerpc/boot/cuboot-52xx.c
+++ b/arch/powerpc/boot/cuboot-52xx.c
@@ -37,6 +37,10 @@
 	 * this can do a simple path lookup.
 	 */
 	soc = find_node_by_devtype(NULL, "soc");
+	if (!soc)
+		soc = find_node_by_compatible(NULL, "fsl,mpc5200-immr");
+	if (!soc)
+		soc = find_node_by_compatible(NULL, "fsl,mpc5200b-immr");
 	if (soc) {
 		setprop(soc, "bus-frequency", &bd.bi_ipbfreq,
 			sizeof(bd.bi_ipbfreq));
diff --git a/arch/powerpc/boot/cuboot-acadia.c b/arch/powerpc/boot/cuboot-acadia.c
new file mode 100644
index 0000000..0634aba
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-acadia.c
@@ -0,0 +1,174 @@
+/*
+ * Old U-boot compatibility for Acadia
+ *
+ * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Copyright 2008 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "io.h"
+#include "dcr.h"
+#include "stdio.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#include "ppcboot.h"
+
+static bd_t bd;
+
+#define CPR_PERD0_SPIDV_MASK   0x000F0000     /* SPI Clock Divider */
+
+#define PLLC_SRC_MASK	       0x20000000     /* PLL feedback source */
+
+#define PLLD_FBDV_MASK	       0x1F000000     /* PLL feedback divider value */
+#define PLLD_FWDVA_MASK        0x000F0000     /* PLL forward divider A value */
+#define PLLD_FWDVB_MASK        0x00000700     /* PLL forward divider B value */
+
+#define PRIMAD_CPUDV_MASK      0x0F000000     /* CPU Clock Divisor Mask */
+#define PRIMAD_PLBDV_MASK      0x000F0000     /* PLB Clock Divisor Mask */
+#define PRIMAD_OPBDV_MASK      0x00000F00     /* OPB Clock Divisor Mask */
+#define PRIMAD_EBCDV_MASK      0x0000000F     /* EBC Clock Divisor Mask */
+
+#define PERD0_PWMDV_MASK       0xFF000000     /* PWM Divider Mask */
+#define PERD0_SPIDV_MASK       0x000F0000     /* SPI Divider Mask */
+#define PERD0_U0DV_MASK        0x0000FF00     /* UART 0 Divider Mask */
+#define PERD0_U1DV_MASK        0x000000FF     /* UART 1 Divider Mask */
+
+static void get_clocks(void)
+{
+	unsigned long sysclk, cpr_plld, cpr_pllc, cpr_primad, plloutb, i;
+	unsigned long pllFwdDiv, pllFwdDivB, pllFbkDiv, pllPlbDiv, pllExtBusDiv;
+	unsigned long pllOpbDiv, freqEBC, freqUART, freqOPB;
+	unsigned long div;		/* total divisor udiv * bdiv */
+	unsigned long umin;		/* minimum udiv	*/
+	unsigned short diff;		/* smallest diff */
+	unsigned long udiv;		/* best udiv */
+	unsigned short idiff;		/* current diff */
+	unsigned short ibdiv;		/* current bdiv */
+	unsigned long est;		/* current estimate */
+	unsigned long baud;
+	void *np;
+
+	/* read the sysclk value from the CPLD */
+	sysclk = (in_8((unsigned char *)0x80000000) == 0xc) ? 66666666 : 33333000;
+
+	/*
+	 * Read PLL Mode registers
+	 */
+	cpr_plld = CPR0_READ(DCRN_CPR0_PLLD);
+	cpr_pllc = CPR0_READ(DCRN_CPR0_PLLC);
+
+	/*
+	 * Determine forward divider A
+	 */
+	pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
+
+	/*
+	 * Determine forward divider B
+	 */
+	pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
+	if (pllFwdDivB == 0)
+		pllFwdDivB = 8;
+
+	/*
+	 * Determine FBK_DIV.
+	 */
+	pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
+	if (pllFbkDiv == 0)
+		pllFbkDiv = 256;
+
+	/*
+	 * Read CPR_PRIMAD register
+	 */
+	cpr_primad = CPR0_READ(DCRN_CPR0_PRIMAD);
+
+	/*
+	 * Determine PLB_DIV.
+	 */
+	pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
+	if (pllPlbDiv == 0)
+		pllPlbDiv = 16;
+
+	/*
+	 * Determine EXTBUS_DIV.
+	 */
+	pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
+	if (pllExtBusDiv == 0)
+		pllExtBusDiv = 16;
+
+	/*
+	 * Determine OPB_DIV.
+	 */
+	pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
+	if (pllOpbDiv == 0)
+		pllOpbDiv = 16;
+
+	/* There is a bug in U-Boot that prevents us from using
+	 * bd.bi_opbfreq because U-Boot doesn't populate it for
+	 * 405EZ.  We get to calculate it, yay!
+	 */
+	freqOPB = (sysclk *pllFbkDiv) /pllOpbDiv;
+
+	freqEBC = (sysclk * pllFbkDiv) / pllExtBusDiv;
+
+	plloutb = ((sysclk * ((cpr_pllc & PLLC_SRC_MASK) ?
+					   pllFwdDivB : pllFwdDiv) *
+		    pllFbkDiv) / pllFwdDivB);
+
+	np = find_node_by_alias("serial0");
+	if (getprop(np, "current-speed", &baud, sizeof(baud)) != sizeof(baud))
+		fatal("no current-speed property\n\r");
+
+	udiv = 256;			/* Assume lowest possible serial clk */
+	div = plloutb / (16 * baud); /* total divisor */
+	umin = (plloutb / freqOPB) << 1;	/* 2 x OPB divisor */
+	diff = 256;			/* highest possible */
+
+	/* i is the test udiv value -- start with the largest
+	 * possible (256) to minimize serial clock and constrain
+	 * search to umin.
+	 */
+	for (i = 256; i > umin; i--) {
+		ibdiv = div / i;
+		est = i * ibdiv;
+		idiff = (est > div) ? (est-div) : (div-est);
+		if (idiff == 0) {
+			udiv = i;
+			break;      /* can't do better */
+		} else if (idiff < diff) {
+			udiv = i;       /* best so far */
+			diff = idiff;   /* update lowest diff*/
+		}
+	}
+	freqUART = plloutb / udiv;
+
+	dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_intfreq, bd.bi_plb_busfreq);
+	dt_fixup_clock("/plb/ebc", freqEBC);
+	dt_fixup_clock("/plb/opb", freqOPB);
+	dt_fixup_clock("/plb/opb/serial@ef600300", freqUART);
+	dt_fixup_clock("/plb/opb/serial@ef600400", freqUART);
+}
+
+static void acadia_fixups(void)
+{
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+	get_clocks();
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+}
+	
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = acadia_fixups;
+	platform_ops.exit = ibm40x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/dts/acadia.dts b/arch/powerpc/boot/dts/acadia.dts
new file mode 100644
index 0000000..57291f6
--- /dev/null
+++ b/arch/powerpc/boot/dts/acadia.dts
@@ -0,0 +1,224 @@
+/*
+ * Device Tree Source for AMCC Acadia (405EZ)
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "amcc,acadia";
+	compatible = "amcc,acadia";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405EZ";
+			reg = <0x0>;
+			clock-frequency = <0>; /* Filled in by wrapper */
+			timebase-frequency = <0>; /* Filled in by wrapper */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>;
+			d-cache-size = <16384>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>; /* Filled in by wrapper */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic-405ez", "ibm,uic";
+		interrupt-controller;
+		dcr-reg = <0x0c0 0x009>;
+		cell-index = <0>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	plb {
+		compatible = "ibm,plb-405ez", "ibm,plb3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by wrapper */
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-405ez", "ibm,mcmal";
+			dcr-reg = <0x380 0x62>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&UIC0>;
+			/* 405EZ has only 3 interrupts to the UIC, as
+			 * SERR, TXDE, and RXDE are or'd together into
+			 * one UIC bit
+			 */
+			interrupts = <
+				0x13 0x4 /* TXEOB */
+				0x15 0x4 /* RXEOB */
+				0x12 0x4 /* SERR, TXDE, RXDE */>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405ez", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			dcr-reg = <0x0a 0x05>;
+			clock-frequency = <0>; /* Filled in by wrapper */
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x8>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by wrapper */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x5 0x4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x8>;
+				clock-frequency = <0>; /* Filled in by wrapper */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x6 0x4>;
+			};
+
+			IIC: i2c@ef600500 {
+				compatible = "ibm,iic-405ez", "ibm,iic";
+				reg = <0xef600500 0x11>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0xa 0x4>;
+			};
+
+			GPIO0: gpio@ef600700 {
+				compatible = "ibm,gpio-405ez";
+				reg = <0xef600700 0x20>;
+			};
+
+			GPIO1: gpio@ef600800 {
+				compatible = "ibm,gpio-405ez";
+				reg = <0xef600800 0x20>;
+			};
+
+			EMAC0: ethernet@ef600900 {
+				device_type = "network";
+				compatible = "ibm,emac-405ez", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0x10 0x4 /* Ethernet */
+					0x11 0x4 /* Ethernet Wake up */>;
+				local-mac-address = [000000000000]; /* Filled in by wrapper */
+				reg = <0xef600900 0x70>;
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "mii";
+				phy-map = <0x0>;
+			};
+
+			CAN0: can@ef601000 {
+				compatible = "amcc,can-405ez";
+				reg = <0xef601000 0x620>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x7 0x4>;
+			};
+
+			CAN1: can@ef601800 {
+				compatible = "amcc,can-405ez";
+				reg = <0xef601800 0x620>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x8 0x4>;
+			};
+
+			cameleon@ef602000 {
+				compatible = "amcc,cameleon-405ez";
+				reg = <0xef602000 0x800>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0xb 0x4 0xc 0x4>;
+			};
+
+			ieee1588@ef602800 {
+				compatible = "amcc,ieee1588-405ez";
+				reg = <0xef602800 0x60>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x4 0x4>;
+				/* This thing is a bit weird.  It has it's own UIC
+				 * that it uses to generate snapshot triggers.  We
+				 * don't really support this device yet, and it needs
+				 * work to figure this out.
+				 */
+				dcr-reg = <0xe0 0x9>;
+			};
+
+			usb@ef603000 {
+				compatible = "ohci-be";
+				reg = <0xef603000 0x80>;
+				interrupts-parent = <&UIC0>;
+				interrupts = <0xd 0x4 0xe 0x4>;
+			};
+
+			dac@ef603300 {
+				compatible = "amcc,dac-405ez";
+				reg = <0xef603300 0x40>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x18 0x4>;
+			};
+
+			adc@ef603400 {
+				compatible = "amcc,adc-405ez";
+				reg = <0xef603400 0x40>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x17 0x4>;
+			};
+
+			spi@ef603500 {
+				compatible = "amcc,spi-405ez";
+				reg = <0xef603500 0x100>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x9 0x4>;
+			};
+		};
+
+		EBC0: ebc {
+			compatible = "ibm,ebc-405ez", "ibm,ebc";
+			dcr-reg = <0x12 0x2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			clock-frequency = <0>; /* Filled in by wrapper */
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/arch/powerpc/boot/dts/hcu4.dts b/arch/powerpc/boot/dts/hcu4.dts
new file mode 100644
index 0000000..7988598
--- /dev/null
+++ b/arch/powerpc/boot/dts/hcu4.dts
@@ -0,0 +1,168 @@
+/*
+* Device Tree Source for Netstal Maschinen HCU4
+* based on the IBM Walnut
+*
+* Copyright 2008
+* Niklaus Giger <niklaus.giger@member.fsf.org>
+*
+* Copyright 2007 IBM Corp.
+* Josh Boyer <jwboyer@linux.vnet.ibm.com>
+*
+* This file is licensed under the terms of the GNU General Public
+* License version 2.  This program is licensed "as is" without
+* any warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+/ {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	model = "netstal,hcu4";
+	compatible = "netstal,hcu4";
+	dcr-parent = <0x1>;
+
+	aliases {
+		ethernet0 = "/plb/opb/ethernet@ef600800";
+		serial0 = "/plb/opb/serial@ef600300";
+	};
+
+	cpus {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405GPr";
+			reg = <0x0>;
+			clock-frequency = <0>;		/* Filled in by U-Boot */
+			timebase-frequency = <0x0>;	/* Filled in by U-Boot */
+			i-cache-line-size = <0x20>;
+			d-cache-line-size = <0x20>;
+			i-cache-size = <0x4000>;
+			d-cache-size = <0x4000>;
+			dcr-controller;
+			dcr-access-method = "native";
+			linux,phandle = <0x1>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;	/* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0x0>;
+		dcr-reg = <0xc0 0x9>;
+		#address-cells = <0x0>;
+		#size-cells = <0x0>;
+		#interrupt-cells = <0x2>;
+		linux,phandle = <0x2>;
+	};
+
+	plb {
+		compatible = "ibm,plb3";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges;
+		clock-frequency = <0x0>;	/* Filled in by U-Boot */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-405gp";
+			dcr-reg = <0x10 0x2>;
+		};
+
+		MAL: mcmal {
+			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x62>;
+			num-tx-chans = <0x1>;
+			num-rx-chans = <0x1>;
+			interrupt-parent = <0x2>;
+			interrupts = <0xb 0x4 0xc 0x4 0xa 0x4 0xd 0x4 0xe 0x4>;
+			linux,phandle = <0x3>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405gp", "ibm,opb";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			ranges = <0xef600000 0xef600000 0xa00000>;
+			dcr-reg = <0xa0 0x5>;
+			clock-frequency = <0x0>;	/* Filled in by U-Boot */
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x8>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0x0>;/* Filled in by U-Boot */
+				current-speed = <0>;	/* Filled in by U-Boot */
+				interrupt-parent = <0x2>;
+				interrupts = <0x0 0x4>;
+			};
+
+			IIC: i2c@ef600500 {
+				compatible = "ibm,iic-405gp", "ibm,iic";
+				reg = <0xef600500 0x11>;
+				interrupt-parent = <0x2>;
+				interrupts = <0x2 0x4>;
+			};
+
+			GPIO: gpio@ef600700 {
+				compatible = "ibm,gpio-405gp";
+				reg = <0xef600700 0x20>;
+			};
+
+			EMAC: ethernet@ef600800 {
+				device_type = "network";
+				compatible = "ibm,emac-405gp", "ibm,emac";
+				interrupt-parent = <0x2>;
+				interrupts = <0xf 0x4 0x9 0x4>;
+				local-mac-address = [00 00 00 00 00 00];
+				reg = <0xef600800 0x70>;
+				mal-device = <0x3>;
+				mal-tx-channel = <0x0>;
+				mal-rx-channel = <0x0>;
+				cell-index = <0x0>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "rmii";
+				phy-map = <0x1>;
+			};
+		};
+
+		EBC0: ebc {
+			compatible = "ibm,ebc-405gp", "ibm,ebc";
+			dcr-reg = <0x12 0x2>;
+			#address-cells = <0x2>;
+			#size-cells = <0x1>;
+			clock-frequency = <0x0>;	/* Filled in by U-Boot */
+
+			sram@0,0 {
+				reg = <0x0 0x0 0x80000>;
+			};
+
+			flash@0,80000 {
+				compatible = "jedec-flash";
+				bank-width = <0x1>;
+				reg = <0x0 0x80000 0x80000>;
+				#address-cells = <0x1>;
+				#size-cells = <0x1>;
+
+				partition@0 {
+					label = "OpenBIOS";
+					reg = <0x0 0x80000>;
+					read-only;
+				};
+			};
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index 7449e54c..6b85067 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -121,6 +121,14 @@
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
+
+			mcu_pio: mcu@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8315erdb",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
 		};
 
 		spi@7000 {
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index e4cc176..57c595b 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -60,7 +60,7 @@
 	};
 
 	bcsr@f8000000 {
-		device_type = "board-control";
+		compatible = "fsl,mpc8323mds-bcsr";
 		reg = <0xf8000000 0x8000>;
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 5cedf37..2c9d54a 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -83,6 +83,14 @@
 			interrupts = <15 0x8>;
 			interrupt-parent = <&ipic>;
 			dfsrr;
+
+			rtc@68 {
+				device_type = "rtc";
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+				interrupts = <18 0x8>;
+				interrupt-parent = <&ipic>;
+			};
 		};
 
 		spi@7000 {
@@ -131,6 +139,14 @@
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
+
+			mcu_pio: mcu@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8349emitx",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
 		};
 
 		usb@22000 {
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index 81ae1d3..fa40647 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -81,6 +81,14 @@
 			interrupts = <15 0x8>;
 			interrupt-parent = <&ipic>;
 			dfsrr;
+
+			rtc@68 {
+				device_type = "rtc";
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+				interrupts = <18 0x8>;
+				interrupt-parent = <&ipic>;
+			};
 		};
 
 		spi@7000 {
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 04bfde3..c986c541e 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -49,7 +49,7 @@
 	};
 
 	bcsr@e2400000 {
-		device_type = "board-control";
+		compatible = "fsl,mpc8349mds-bcsr";
 		reg = <0xe2400000 0x8000>;
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 66a12d2..14534d0 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -69,7 +69,7 @@
 		};
 
 		bcsr@1,0 {
-			device_type = "board-control";
+ 			compatible = "fsl,mpc8360mds-bcsr";
 			reg = <1 0 0x8000>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 53191ba..435ef3d 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -121,6 +121,14 @@
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
+
+			mcu_pio: mcu@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8377erdb",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
 		};
 
 		i2c@3100 {
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 4a09153..b11e68f 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -121,6 +121,14 @@
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
+
+			mcu_pio: mcu@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8378erdb",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
 		};
 
 		i2c@3100 {
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index bbd884a..337af6e 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -121,6 +121,14 @@
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
+
+			mcu_pio: mcu@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8379erdb",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
 		};
 
 		i2c@3100 {
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 93fdd99..35db1e5 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -109,7 +109,7 @@
 				reg = <0x0 0x80>;
 				cell-index = <0>;
 				interrupt-parent = <&mpic>;
-				interrupts = <14 0x2>;
+				interrupts = <20 2>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,mpc8536-dma-channel",
@@ -117,7 +117,7 @@
 				reg = <0x80 0x80>;
 				cell-index = <1>;
 				interrupt-parent = <&mpic>;
-				interrupts = <15 0x2>;
+				interrupts = <21 2>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,mpc8536-dma-channel",
@@ -125,7 +125,7 @@
 				reg = <0x100 0x80>;
 				cell-index = <2>;
 				interrupt-parent = <&mpic>;
-				interrupts = <16 0x2>;
+				interrupts = <22 2>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,mpc8536-dma-channel",
@@ -133,7 +133,7 @@
 				reg = <0x180 0x80>;
 				cell-index = <3>;
 				interrupt-parent = <&mpic>;
-				interrupts = <17 0x2>;
+				interrupts = <23 2>;
 			};
 		};
 
@@ -180,7 +180,7 @@
 		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";
-			model = "TSEC";
+			model = "eTSEC";
 			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
@@ -193,7 +193,7 @@
 		enet1: ethernet@26000 {
 			cell-index = <1>;
 			device_type = "network";
-			model = "TSEC";
+			model = "eTSEC";
 			compatible = "gianfar";
 			reg = <0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index a15f103..c80158f 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -52,7 +52,7 @@
 	};
 
 	bcsr@f8000000 {
-		device_type = "board-control";
+		compatible = "fsl,mpc8568mds-bcsr";
 		reg = <0xf8000000 0x8000>;
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index e124dd1..cadd465 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -13,8 +13,8 @@
 / {
 	model = "fsl,MPC8572DS";
 	compatible = "fsl,MPC8572DS";
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	aliases {
 		ethernet0 = &enet0;
@@ -61,7 +61,6 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x0 0x0>;	// Filled by U-Boot
 	};
 
 	soc8572@ffe00000 {
@@ -69,8 +68,8 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		compatible = "simple-bus";
-		ranges = <0x0 0xffe00000 0x100000>;
-		reg = <0xffe00000 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
+		ranges = <0x0 0 0xffe00000 0x100000>;
+		reg = <0 0xffe00000 0 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
 
 		memory-controller@2000 {
@@ -351,10 +350,10 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe08000 0x1000>;
+		reg = <0 0xffe08000 0 0x1000>;
 		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;
@@ -561,10 +560,10 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe09000 0x1000>;
+		reg = <0 0xffe09000 0 0x1000>;
 		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <26 2>;
@@ -598,10 +597,10 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe0a000 0x1000>;
+		reg = <0 0xffe0a000 0 0x1000>;
 		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <27 2>;
diff --git a/arch/powerpc/boot/libfdt-wrapper.c b/arch/powerpc/boot/libfdt-wrapper.c
index c541fd8..9276327 100644
--- a/arch/powerpc/boot/libfdt-wrapper.c
+++ b/arch/powerpc/boot/libfdt-wrapper.c
@@ -105,6 +105,11 @@
 	return check_err(rc);
 }
 
+static int fdt_wrapper_del_node(const void *devp)
+{
+	return fdt_del_node(fdt, devp_offset(devp));
+}
+
 static void *fdt_wrapper_get_parent(const void *devp)
 {
 	return offset_devp(fdt_parent_offset(fdt, devp_offset(devp)));
@@ -165,6 +170,7 @@
 void fdt_init(void *blob)
 {
 	int err;
+	int bufsize;
 
 	dt_ops.finddevice = fdt_wrapper_finddevice;
 	dt_ops.getprop = fdt_wrapper_getprop;
@@ -173,21 +179,21 @@
 	dt_ops.create_node = fdt_wrapper_create_node;
 	dt_ops.find_node_by_prop_value = fdt_wrapper_find_node_by_prop_value;
 	dt_ops.find_node_by_compatible = fdt_wrapper_find_node_by_compatible;
+	dt_ops.del_node = fdt_wrapper_del_node;
 	dt_ops.get_path = fdt_wrapper_get_path;
 	dt_ops.finalize = fdt_wrapper_finalize;
 
 	/* Make sure the dt blob is the right version and so forth */
 	fdt = blob;
-	err = fdt_open_into(fdt, fdt, fdt_totalsize(blob));
-	if (err == -FDT_ERR_NOSPACE) {
-		int bufsize = fdt_totalsize(fdt) + 4;
-		buf = malloc(bufsize);
-		err = fdt_open_into(fdt, buf, bufsize);
-	}
+	bufsize = fdt_totalsize(fdt) + 4;
+	buf = malloc(bufsize);
+	if(!buf)
+		fatal("malloc failed. can't relocate the device tree\n\r");
+
+	err = fdt_open_into(fdt, buf, bufsize);
 
 	if (err != 0)
 		fatal("fdt_init(): %s\n\r", fdt_strerror(err));
 
-	if (buf)
-		fdt = buf;
+	fdt = buf;
 }
diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c
index 9e7f3dd..ae32801 100644
--- a/arch/powerpc/boot/main.c
+++ b/arch/powerpc/boot/main.c
@@ -56,9 +56,19 @@
 	if (platform_ops.vmlinux_alloc) {
 		addr = platform_ops.vmlinux_alloc(ei.memsize);
 	} else {
-		if ((unsigned long)_start < ei.memsize)
+		/*
+		 * Check if the kernel image (without bss) would overwrite the
+		 * bootwrapper. The device tree has been moved in fdt_init()
+		 * to an area allocated with malloc() (somewhere past _end).
+		 */
+		if ((unsigned long)_start < ei.loadsize)
 			fatal("Insufficient memory for kernel at address 0!"
-			       " (_start=%p)\n\r", _start);
+			       " (_start=%p, uncomressed size=%08x)\n\r",
+			       _start, ei.loadsize);
+
+		if ((unsigned long)_end < ei.memsize)
+			fatal("The final kernel image would overwrite the "
+					"device tree\n\r");
 	}
 
 	/* Finally, gunzip the kernel */
diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h
index 321e2f5..b3218ce 100644
--- a/arch/powerpc/boot/ops.h
+++ b/arch/powerpc/boot/ops.h
@@ -40,6 +40,7 @@
 			const int buflen);
 	int	(*setprop)(const void *phandle, const char *name,
 			const void *buf, const int buflen);
+	int (*del_node)(const void *phandle);
 	void *(*get_parent)(const void *phandle);
 	/* The node must not already exist. */
 	void *(*create_node)(const void *parent, const char *name);
@@ -126,6 +127,11 @@
 	return -1;
 }
 
+static inline int del_node(const void *devp)
+{
+	return dt_ops.del_node ? dt_ops.del_node(devp) : -1;
+}
+
 static inline void *get_parent(const char *devp)
 {
 	return dt_ops.get_parent ? dt_ops.get_parent(devp) : NULL;
diff --git a/arch/powerpc/boot/string.S b/arch/powerpc/boot/string.S
index 643e4cb..acc9428 100644
--- a/arch/powerpc/boot/string.S
+++ b/arch/powerpc/boot/string.S
@@ -235,7 +235,7 @@
 	.globl	memcmp
 memcmp:
 	cmpwi	0,r5,0
-	blelr
+	ble	2f
 	mtctr	r5
 	addi	r6,r3,-1
 	addi	r4,r4,-1
@@ -244,6 +244,8 @@
 	subf.	r3,r0,r3
 	bdnzt	2,1b
 	blr
+2:	li	r3,0
+	blr
 
 
 /*
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index ee0dc41..f390735 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -306,11 +306,14 @@
 
 # post-processing needed for some platforms
 case "$platform" in
-pseries|chrp)
+pseries)
     ${CROSS}objcopy -O binary -j .fakeelf "$kernel" "$ofile".rpanote
     $objbin/addnote "$ofile" "$ofile".rpanote
     rm -r "$ofile".rpanote
     ;;
+chrp)
+    $objbin/addnote -r c00000 "$ofile"
+    ;;
 coff)
     ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
     $objbin/hack-coff "$ofile"
diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig
new file mode 100644
index 0000000..39bd9eb4
--- /dev/null
+++ b/arch/powerpc/configs/40x/acadia_defconfig
@@ -0,0 +1,921 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Mon Oct 13 13:47:16 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_ACADIA=y
+# CONFIG_EP405 is not set
+# CONFIG_KILAUEA is not set
+# CONFIG_MAKALU is not set
+# CONFIG_WALNUT is not set
+# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+CONFIG_PPC40x_SIMPLE=y
+CONFIG_405EZ=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+CONFIG_IBM_NEW_EMAC_DEBUG=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL=y
+CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT=y
+CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig
new file mode 100644
index 0000000..682fce0
--- /dev/null
+++ b/arch/powerpc/configs/40x/hcu4_defconfig
@@ -0,0 +1,929 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26.5
+# Tue Sep 16 00:44:33 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_LOGBUFFER is not set
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_EP405 is not set
+CONFIG_HCU4=y
+# CONFIG_KILAUEA is not set
+# CONFIG_MAKALU is not set
+# CONFIG_WALNUT is not set
+# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h
index f6c93c7..a503da9 100644
--- a/arch/powerpc/include/asm/kdump.h
+++ b/arch/powerpc/include/asm/kdump.h
@@ -9,6 +9,12 @@
  * Reserve to the end of the FWNMI area, see head_64.S */
 #define KDUMP_RESERVE_LIMIT	0x10000 /* 64K */
 
+/*
+ * Used to differentiate between relocatable kdump kernel and other
+ * kernels
+ */
+#define KDUMP_SIGNATURE	0xfeed1234
+
 #ifdef CONFIG_CRASH_DUMP
 
 #define KDUMP_TRAMPOLINE_START	0x0100
@@ -19,17 +25,18 @@
 #endif /* CONFIG_CRASH_DUMP */
 
 #ifndef __ASSEMBLY__
-#ifdef CONFIG_CRASH_DUMP
 
+extern unsigned long __kdump_flag;
+
+#if defined(CONFIG_CRASH_DUMP) && !defined(CONFIG_RELOCATABLE)
 extern void reserve_kdump_trampoline(void);
 extern void setup_kdump_trampoline(void);
-
-#else /* !CONFIG_CRASH_DUMP */
-
+#else
+/* !CRASH_DUMP || RELOCATABLE */
 static inline void reserve_kdump_trampoline(void) { ; }
 static inline void setup_kdump_trampoline(void) { ; }
+#endif
 
-#endif /* CONFIG_CRASH_DUMP */
 #endif /* __ASSEMBLY__ */
 
 #endif /* __PPC64_KDUMP_H */
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 5ac51e6..c0b8d4a 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -77,6 +77,7 @@
 
 #if defined(CONFIG_RELOCATABLE)
 #ifndef __ASSEMBLY__
+
 extern phys_addr_t memstart_addr;
 extern phys_addr_t kernstart_addr;
 #endif
diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h
index a7360cd..69f709d 100644
--- a/arch/powerpc/include/asm/signal.h
+++ b/arch/powerpc/include/asm/signal.h
@@ -122,7 +122,6 @@
 
 #ifdef __KERNEL__
 struct pt_regs;
-extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
 #define ptrace_signal_deliver(regs, cookie) do { } while (0)
 #endif /* __KERNEL__ */
 
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index e70d048..b1eb834 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1277,6 +1277,19 @@
 		.machine_check		= machine_check_4xx,
 		.platform		= "ppc405",
 	},
+	{
+		/* 405EZ */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x41510000,
+		.cpu_name		= "405EZ",
+		.cpu_features		= CPU_FTRS_40X,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.machine_check		= machine_check_4xx,
+		.platform		= "ppc405",
+	},
 	{	/* default match */
 		.pvr_mask		= 0x00000000,
 		.pvr_value		= 0x00000000,
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 97e0563..19671ac 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -30,6 +30,7 @@
 /* Stores the physical address of elf header of crash image. */
 unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
 
+#ifndef CONFIG_RELOCATABLE
 void __init reserve_kdump_trampoline(void)
 {
 	lmb_reserve(0, KDUMP_RESERVE_LIMIT);
@@ -68,6 +69,7 @@
 
 	DBG(" <- setup_kdump_trampoline()\n");
 }
+#endif /* CONFIG_RELOCATABLE */
 
 /*
  * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 84856be..69489bd 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -97,6 +97,12 @@
 __secondary_hold_acknowledge:
 	.llong	0x0
 
+	/* This flag is set by purgatory if we should be a kdump kernel. */
+	/* Do not move this variable as purgatory knows about it. */
+	.globl	__kdump_flag
+__kdump_flag:
+	.llong	0x0
+
 #ifdef CONFIG_PPC_ISERIES
 	/*
 	 * At offset 0x20, there is a pointer to iSeries LPAR data.
@@ -1384,7 +1390,13 @@
 	/* process relocations for the final address of the kernel */
 	lis	r25,PAGE_OFFSET@highest	/* compute virtual base of kernel */
 	sldi	r25,r25,32
-	mr	r3,r25
+#ifdef CONFIG_CRASH_DUMP
+	ld	r7,__kdump_flag-_stext(r26)
+	cmpldi	cr0,r7,1	/* kdump kernel ? - stay where we are */
+	bne	1f
+	add	r25,r25,r26
+#endif
+1:	mr	r3,r25
 	bl	.relocate
 #endif
 
@@ -1398,11 +1410,26 @@
 	li	r3,0			/* target addr */
 	mr.	r4,r26			/* In some cases the loader may  */
 	beq	9f			/* have already put us at zero */
-	lis	r5,(copy_to_here - _stext)@ha
-	addi	r5,r5,(copy_to_here - _stext)@l /* # bytes of memory to copy */
 	li	r6,0x100		/* Start offset, the first 0x100 */
 					/* bytes were copied earlier.	 */
 
+#ifdef CONFIG_CRASH_DUMP
+/*
+ * Check if the kernel has to be running as relocatable kernel based on the
+ * variable __kdump_flag, if it is set the kernel is treated as relocatable
+ * kernel, otherwise it will be moved to PHYSICAL_START
+ */
+	ld	r7,__kdump_flag-_stext(r26)
+	cmpldi	cr0,r7,1
+	bne	3f
+
+	li	r5,__end_interrupts - _stext	/* just copy interrupts */
+	b	5f
+3:
+#endif
+	lis	r5,(copy_to_here - _stext)@ha
+	addi	r5,r5,(copy_to_here - _stext)@l /* # bytes of memory to copy */
+
 	bl	.copy_and_flush		/* copy the first n bytes	 */
 					/* this includes the code being	 */
 					/* executed here.		 */
@@ -1411,15 +1438,15 @@
 	mtctr	r8
 	bctr
 
+p_end:	.llong	_end - _stext
+
 4:	/* Now copy the rest of the kernel up to _end */
 	addis	r5,r26,(p_end - _stext)@ha
 	ld	r5,(p_end - _stext)@l(r5)	/* get _end */
-	bl	.copy_and_flush		/* copy the rest */
+5:	bl	.copy_and_flush		/* copy the rest */
 
 9:	b	.start_here_multiplatform
 
-p_end:	.llong	_end - _stext
-
 /*
  * Copy routine used to copy the kernel to start at physical address 0
  * and flush and invalidate the caches as needed.
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index ea1ba89..3857d7e 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -458,6 +458,42 @@
 	spin_unlock_irqrestore(&(tbl->it_lock), flags);
 }
 
+static void iommu_table_clear(struct iommu_table *tbl)
+{
+	if (!__kdump_flag) {
+		/* Clear the table in case firmware left allocations in it */
+		ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size);
+		return;
+	}
+
+#ifdef CONFIG_CRASH_DUMP
+	if (ppc_md.tce_get) {
+		unsigned long index, tceval, tcecount = 0;
+
+		/* Reserve the existing mappings left by the first kernel. */
+		for (index = 0; index < tbl->it_size; index++) {
+			tceval = ppc_md.tce_get(tbl, index + tbl->it_offset);
+			/*
+			 * Freed TCE entry contains 0x7fffffffffffffff on JS20
+			 */
+			if (tceval && (tceval != 0x7fffffffffffffffUL)) {
+				__set_bit(index, tbl->it_map);
+				tcecount++;
+			}
+		}
+
+		if ((tbl->it_size - tcecount) < KDUMP_MIN_TCE_ENTRIES) {
+			printk(KERN_WARNING "TCE table is full; freeing ");
+			printk(KERN_WARNING "%d entries for the kdump boot\n",
+				KDUMP_MIN_TCE_ENTRIES);
+			for (index = tbl->it_size - KDUMP_MIN_TCE_ENTRIES;
+				index < tbl->it_size; index++)
+				__clear_bit(index, tbl->it_map);
+		}
+	}
+#endif
+}
+
 /*
  * Build a iommu_table structure.  This contains a bit map which
  * is used to manage allocation of the tce space.
@@ -484,38 +520,7 @@
 	tbl->it_largehint = tbl->it_halfpoint;
 	spin_lock_init(&tbl->it_lock);
 
-#ifdef CONFIG_CRASH_DUMP
-	if (ppc_md.tce_get) {
-		unsigned long index;
-		unsigned long tceval;
-		unsigned long tcecount = 0;
-
-		/*
-		 * Reserve the existing mappings left by the first kernel.
-		 */
-		for (index = 0; index < tbl->it_size; index++) {
-			tceval = ppc_md.tce_get(tbl, index + tbl->it_offset);
-			/*
-			 * Freed TCE entry contains 0x7fffffffffffffff on JS20
-			 */
-			if (tceval && (tceval != 0x7fffffffffffffffUL)) {
-				__set_bit(index, tbl->it_map);
-				tcecount++;
-			}
-		}
-		if ((tbl->it_size - tcecount) < KDUMP_MIN_TCE_ENTRIES) {
-			printk(KERN_WARNING "TCE table is full; ");
-			printk(KERN_WARNING "freeing %d entries for the kdump boot\n",
-				KDUMP_MIN_TCE_ENTRIES);
-			for (index = tbl->it_size - KDUMP_MIN_TCE_ENTRIES;
-				index < tbl->it_size; index++)
-				__clear_bit(index, tbl->it_map);
-		}
-	}
-#else
-	/* Clear the hardware table in case firmware left allocations in it */
-	ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size);
-#endif
+	iommu_table_clear(tbl);
 
 	if (!welcomed) {
 		printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n",
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index aab7688..ac2a21f 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -88,11 +88,13 @@
 
 	crash_size = crashk_res.end - crashk_res.start + 1;
 
+#ifndef CONFIG_RELOCATABLE
 	if (crashk_res.start != KDUMP_KERNELBASE)
 		printk("Crash kernel location must be 0x%x\n",
 				KDUMP_KERNELBASE);
 
 	crashk_res.start = KDUMP_KERNELBASE;
+#endif
 	crash_size = PAGE_ALIGN(crash_size);
 	crashk_res.end = crashk_res.start + crash_size - 1;
 
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index a168514..e6efec7 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -255,11 +255,14 @@
 /* Our assembly helper, in kexec_stub.S */
 extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start,
 					void *image, void *control,
-					void (*clear_all)(void)) ATTRIB_NORET;
+					void (*clear_all)(void),
+					unsigned long kdump_flag) ATTRIB_NORET;
 
 /* too late to fail here */
 void default_machine_kexec(struct kimage *image)
 {
+	unsigned long kdump_flag = 0;
+
 	/* prepare control code if any */
 
 	/*
@@ -270,8 +273,10 @@
         * using debugger IPI.
         */
 
-       if (crashing_cpu == -1)
-               kexec_prepare_cpus();
+	if (crashing_cpu == -1)
+		kexec_prepare_cpus();
+	else
+		kdump_flag = KDUMP_SIGNATURE;
 
 	/* switch to a staticly allocated stack.  Based on irq stack code.
 	 * XXX: the task struct will likely be invalid once we do the copy!
@@ -284,7 +289,7 @@
 	 */
 	kexec_sequence(&kexec_stack, image->start, image,
 			page_address(image->control_code_page),
-			ppc_md.hpte_clear_all);
+			ppc_md.hpte_clear_all, kdump_flag);
 	/* NOTREACHED */
 }
 
@@ -312,11 +317,24 @@
 static void __init export_htab_values(void)
 {
 	struct device_node *node;
+	struct property *prop;
 
 	node = of_find_node_by_path("/chosen");
 	if (!node)
 		return;
 
+	/* remove any stale propertys so ours can be found */
+	prop = of_find_property(node, kernel_end_prop.name, NULL);
+	if (prop)
+		prom_remove_property(node, prop);
+	prop = of_find_property(node, htab_base_prop.name, NULL);
+	if (prop)
+		prom_remove_property(node, prop);
+	prop = of_find_property(node, htab_size_prop.name, NULL);
+	if (prop)
+		prom_remove_property(node, prop);
+
+	/* information needed by userspace when using default_machine_kexec */
 	kernel_end = __pa(_end);
 	prom_add_property(node, &kernel_end_prop);
 
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 3053fe5..a243fd0 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -611,10 +611,12 @@
 
 
 /*
- * kexec_sequence(newstack, start, image, control, clear_all())
+ * kexec_sequence(newstack, start, image, control, clear_all(), kdump_flag)
  *
  * does the grungy work with stack switching and real mode switches
  * also does simple calls to other code
+ *
+ * kdump_flag says whether the next kernel should be a kdump kernel.
  */
 
 _GLOBAL(kexec_sequence)
@@ -647,7 +649,7 @@
 	mr	r29,r5			/* image (virt) */
 	mr	r28,r6			/* control, unused */
 	mr	r27,r7			/* clear_all() fn desc */
-	mr	r26,r8			/* spare */
+	mr	r26,r8			/* kdump flag */
 	lhz	r25,PACAHWCPUID(r13)	/* get our phys cpu from paca */
 
 	/* disable interrupts, we are overwriting kernel data next */
@@ -709,5 +711,6 @@
 	mr	r4,r30	# start, aka phys mem offset
 	mtlr	4
 	li	r5,0
-	blr	/* image->start(physid, image->start, 0); */
+	mr	r6,r26			/* kdump_flag */
+	blr	/* image->start(physid, image->start, 0, kdump_flag); */
 #endif /* CONFIG_KEXEC */
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 3815d84..1ec7393 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -610,7 +610,8 @@
 	pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset);
 
 	vma->vm_pgoff = offset >> PAGE_SHIFT;
-	vma->vm_page_prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
+	vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
+				     | _PAGE_NO_CACHE | _PAGE_GUARDED);
 	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
 			       vma->vm_end - vma->vm_start,
 			       vma->vm_page_prot);
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 2fdbc18..23e0db2 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -487,67 +487,6 @@
 	return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd);
 }
 
-/* We can't use the standard versions because of RELOC headaches. */
-#define isxdigit(c)	(('0' <= (c) && (c) <= '9') \
-			 || ('a' <= (c) && (c) <= 'f') \
-			 || ('A' <= (c) && (c) <= 'F'))
-
-#define isdigit(c)	('0' <= (c) && (c) <= '9')
-#define islower(c)	('a' <= (c) && (c) <= 'z')
-#define toupper(c)	(islower(c) ? ((c) - 'a' + 'A') : (c))
-
-unsigned long prom_strtoul(const char *cp, const char **endp)
-{
-	unsigned long result = 0, base = 10, value;
-
-	if (*cp == '0') {
-		base = 8;
-		cp++;
-		if (toupper(*cp) == 'X') {
-			cp++;
-			base = 16;
-		}
-	}
-
-	while (isxdigit(*cp) &&
-	       (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) {
-		result = result * base + value;
-		cp++;
-	}
-
-	if (endp)
-		*endp = cp;
-
-	return result;
-}
-
-unsigned long prom_memparse(const char *ptr, const char **retptr)
-{
-	unsigned long ret = prom_strtoul(ptr, retptr);
-	int shift = 0;
-
-	/*
-	 * We can't use a switch here because GCC *may* generate a
-	 * jump table which won't work, because we're not running at
-	 * the address we're linked at.
-	 */
-	if ('G' == **retptr || 'g' == **retptr)
-		shift = 30;
-
-	if ('M' == **retptr || 'm' == **retptr)
-		shift = 20;
-
-	if ('K' == **retptr || 'k' == **retptr)
-		shift = 10;
-
-	if (shift) {
-		ret <<= shift;
-		(*retptr)++;
-	}
-
-	return ret;
-}
-
 /*
  * Early parsing of the command line passed to the kernel, used for
  * "mem=x" and the options that affect the iommu
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 2c7e8e8..ea3a2ec 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -20,7 +20,7 @@
 _end enter_prom memcpy memset reloc_offset __secondary_hold
 __secondary_hold_acknowledge __secondary_hold_spinloop __start
 strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
-reloc_got2 kernstart_addr"
+reloc_got2 kernstart_addr memstart_addr"
 
 NM="$1"
 OBJ="$2"
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 5ec56ff..705fc4b 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -59,6 +59,7 @@
 #include <asm/mmu.h>
 #include <asm/xmon.h>
 #include <asm/cputhreads.h>
+#include <mm/mmu_decl.h>
 
 #include "setup.h"
 
@@ -190,6 +191,12 @@
 		if (ppc_md.show_cpuinfo != NULL)
 			ppc_md.show_cpuinfo(m);
 
+#ifdef CONFIG_PPC32
+		/* Display the amount of memory */
+		seq_printf(m, "Memory\t\t: %d MB\n",
+			   (unsigned int)(total_memory / (1024 * 1024)));
+#endif
+
 		return 0;
 	}
 
diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h
index 28f4b9f..b427bf8 100644
--- a/arch/powerpc/kernel/signal.h
+++ b/arch/powerpc/kernel/signal.h
@@ -12,6 +12,8 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
+
 extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 				  size_t frame_size);
 extern void restore_sigmask(sigset_t *set);
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 65ad925..c6a8f232 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -235,8 +235,6 @@
 	else
 		for (i = 0; i < 32 ; i++)
 			current->thread.fpr[i][TS_VSRLOWOFFSET] = 0;
-
-#else
 #endif
 	return err;
 }
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index cb01ebc..7b7da8c 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -142,7 +142,7 @@
 	speed = (clock / prescaler) / (divisor * 16);
 
 	/* sanity check */
-	if (speed < 0 || speed > (clock / 16))
+	if (speed > (clock / 16))
 		speed = 9600;
 
 	return speed;
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 5c64af1..8d5b475 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -382,8 +382,10 @@
 	printk(KERN_INFO "Huge page(16GB) memory: "
 			"addr = 0x%lX size = 0x%lX pages = %d\n",
 			phys_addr, block_size, expected_pages);
-	lmb_reserve(phys_addr, block_size * expected_pages);
-	add_gpage(phys_addr, block_size, expected_pages);
+	if (phys_addr + (16 * GB) <= lmb_end_of_DRAM()) {
+		lmb_reserve(phys_addr, block_size * expected_pages);
+		add_gpage(phys_addr, block_size, expected_pages);
+	}
 	return 0;
 }
 #endif /* CONFIG_HUGETLB_PAGE */
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 6cf5c71..eb505ad 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -116,6 +116,7 @@
 
 /*
  * get_node_active_region - Return active region containing start_pfn
+ * Active range returned is empty if none found.
  * @start_pfn: The page to return the region for.
  * @node_ar: Returned set to the active region containing start_pfn
  */
@@ -126,6 +127,7 @@
 
 	node_ar->nid = nid;
 	node_ar->start_pfn = start_pfn;
+	node_ar->end_pfn = start_pfn;
 	work_with_active_regions(nid, get_active_region_work_fn, node_ar);
 }
 
@@ -526,12 +528,10 @@
 	/*
 	 * We use lmb_end_of_DRAM() in here instead of memory_limit because
 	 * we've already adjusted it for the limit and it takes care of
-	 * having memory holes below the limit.
+	 * having memory holes below the limit.  Also, in the case of
+	 * iommu_is_off, memory_limit is not set but is implicitly enforced.
 	 */
 
-	if (! memory_limit)
-		return size;
-
 	if (start + size <= lmb_end_of_DRAM())
 		return size;
 
@@ -933,18 +933,20 @@
 		struct node_active_region node_ar;
 
 		get_node_active_region(start_pfn, &node_ar);
-		while (start_pfn < end_pfn) {
+		while (start_pfn < end_pfn &&
+			node_ar.start_pfn < node_ar.end_pfn) {
+			unsigned long reserve_size = size;
 			/*
 			 * if reserved region extends past active region
 			 * then trim size to active region
 			 */
 			if (end_pfn > node_ar.end_pfn)
-				size = (node_ar.end_pfn << PAGE_SHIFT)
+				reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
 					- (start_pfn << PAGE_SHIFT);
-			dbg("reserve_bootmem %lx %lx nid=%d\n", physbase, size,
-				node_ar.nid);
+			dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
+				reserve_size, node_ar.nid);
 			reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
-						size, BOOTMEM_DEFAULT);
+						reserve_size, BOOTMEM_DEFAULT);
 			/*
 			 * if reserved region is contained in the active region
 			 * then done.
@@ -959,6 +961,7 @@
 			 */
 			start_pfn = node_ar.end_pfn;
 			physbase = start_pfn << PAGE_SHIFT;
+			size = size - reserve_size;
 			get_node_active_region(start_pfn, &node_ar);
 		}
 
diff --git a/arch/powerpc/oprofile/cell/pr_util.h b/arch/powerpc/oprofile/cell/pr_util.h
index 22e4e8d..628009c 100644
--- a/arch/powerpc/oprofile/cell/pr_util.h
+++ b/arch/powerpc/oprofile/cell/pr_util.h
@@ -24,6 +24,11 @@
 #define SKIP_GENERIC_SYNC 0
 #define SYNC_START_ERROR -1
 #define DO_GENERIC_SYNC 1
+#define SPUS_PER_NODE   8
+#define DEFAULT_TIMER_EXPIRE  (HZ / 10)
+
+extern struct delayed_work spu_work;
+extern int spu_prof_running;
 
 struct spu_overlay_info {	/* map of sections within an SPU overlay */
 	unsigned int vma;	/* SPU virtual memory address from elf */
@@ -62,6 +67,14 @@
 
 };
 
+struct spu_buffer {
+	int last_guard_val;
+	int ctx_sw_seen;
+	unsigned long *buff;
+	unsigned int head, tail;
+};
+
+
 /* The three functions below are for maintaining and accessing
  * the vma-to-fileoffset map.
  */
diff --git a/arch/powerpc/oprofile/cell/spu_profiler.c b/arch/powerpc/oprofile/cell/spu_profiler.c
index 380d7e2..dd499c3 100644
--- a/arch/powerpc/oprofile/cell/spu_profiler.c
+++ b/arch/powerpc/oprofile/cell/spu_profiler.c
@@ -23,12 +23,11 @@
 
 static u32 *samples;
 
-static int spu_prof_running;
+int spu_prof_running;
 static unsigned int profiling_interval;
 
 #define NUM_SPU_BITS_TRBUF 16
 #define SPUS_PER_TB_ENTRY   4
-#define SPUS_PER_NODE	     8
 
 #define SPU_PC_MASK	     0xFFFF
 
@@ -196,7 +195,7 @@
 	pr_debug("timer resolution: %lu\n", TICK_NSEC);
 	kt = ktime_set(0, profiling_interval);
 	hrtimer_init(&timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	timer.expires = kt;
+	hrtimer_set_expires(&timer, kt);
 	timer.function = profile_spus;
 
 	/* Allocate arrays for collecting SPU PC samples */
@@ -208,6 +207,7 @@
 
 	spu_prof_running = 1;
 	hrtimer_start(&timer, kt, HRTIMER_MODE_REL);
+	schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE);
 
 	return 0;
 }
diff --git a/arch/powerpc/oprofile/cell/spu_task_sync.c b/arch/powerpc/oprofile/cell/spu_task_sync.c
index 2a9b4a0..2949126 100644
--- a/arch/powerpc/oprofile/cell/spu_task_sync.c
+++ b/arch/powerpc/oprofile/cell/spu_task_sync.c
@@ -35,7 +35,102 @@
 static DEFINE_SPINLOCK(cache_lock);
 static int num_spu_nodes;
 int spu_prof_num_nodes;
-int last_guard_val[MAX_NUMNODES * 8];
+
+struct spu_buffer spu_buff[MAX_NUMNODES * SPUS_PER_NODE];
+struct delayed_work spu_work;
+static unsigned max_spu_buff;
+
+static void spu_buff_add(unsigned long int value, int spu)
+{
+	/* spu buff is a circular buffer.  Add entries to the
+	 * head.  Head is the index to store the next value.
+	 * The buffer is full when there is one available entry
+	 * in the queue, i.e. head and tail can't be equal.
+	 * That way we can tell the difference between the
+	 * buffer being full versus empty.
+	 *
+	 *  ASSUPTION: the buffer_lock is held when this function
+	 *             is called to lock the buffer, head and tail.
+	 */
+	int full = 1;
+
+	if (spu_buff[spu].head >= spu_buff[spu].tail) {
+		if ((spu_buff[spu].head - spu_buff[spu].tail)
+		    <  (max_spu_buff - 1))
+			full = 0;
+
+	} else if (spu_buff[spu].tail > spu_buff[spu].head) {
+		if ((spu_buff[spu].tail - spu_buff[spu].head)
+		    > 1)
+			full = 0;
+	}
+
+	if (!full) {
+		spu_buff[spu].buff[spu_buff[spu].head] = value;
+		spu_buff[spu].head++;
+
+		if (spu_buff[spu].head >= max_spu_buff)
+			spu_buff[spu].head = 0;
+	} else {
+		/* From the user's perspective make the SPU buffer
+		 * size management/overflow look like we are using
+		 * per cpu buffers.  The user uses the same
+		 * per cpu parameter to adjust the SPU buffer size.
+		 * Increment the sample_lost_overflow to inform
+		 * the user the buffer size needs to be increased.
+		 */
+		oprofile_cpu_buffer_inc_smpl_lost();
+	}
+}
+
+/* This function copies the per SPU buffers to the
+ * OProfile kernel buffer.
+ */
+void sync_spu_buff(void)
+{
+	int spu;
+	unsigned long flags;
+	int curr_head;
+
+	for (spu = 0; spu < num_spu_nodes; spu++) {
+		/* In case there was an issue and the buffer didn't
+		 * get created skip it.
+		 */
+		if (spu_buff[spu].buff == NULL)
+			continue;
+
+		/* Hold the lock to make sure the head/tail
+		 * doesn't change while spu_buff_add() is
+		 * deciding if the buffer is full or not.
+		 * Being a little paranoid.
+		 */
+		spin_lock_irqsave(&buffer_lock, flags);
+		curr_head = spu_buff[spu].head;
+		spin_unlock_irqrestore(&buffer_lock, flags);
+
+		/* Transfer the current contents to the kernel buffer.
+		 * data can still be added to the head of the buffer.
+		 */
+		oprofile_put_buff(spu_buff[spu].buff,
+				  spu_buff[spu].tail,
+				  curr_head, max_spu_buff);
+
+		spin_lock_irqsave(&buffer_lock, flags);
+		spu_buff[spu].tail = curr_head;
+		spin_unlock_irqrestore(&buffer_lock, flags);
+	}
+
+}
+
+static void wq_sync_spu_buff(struct work_struct *work)
+{
+	/* move data from spu buffers to kernel buffer */
+	sync_spu_buff();
+
+	/* only reschedule if profiling is not done */
+	if (spu_prof_running)
+		schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE);
+}
 
 /* Container for caching information about an active SPU task. */
 struct cached_info {
@@ -305,14 +400,21 @@
 
 	/* Record context info in event buffer */
 	spin_lock_irqsave(&buffer_lock, flags);
-	add_event_entry(ESCAPE_CODE);
-	add_event_entry(SPU_CTX_SWITCH_CODE);
-	add_event_entry(spu->number);
-	add_event_entry(spu->pid);
-	add_event_entry(spu->tgid);
-	add_event_entry(app_dcookie);
-	add_event_entry(spu_cookie);
-	add_event_entry(offset);
+	spu_buff_add(ESCAPE_CODE, spu->number);
+	spu_buff_add(SPU_CTX_SWITCH_CODE, spu->number);
+	spu_buff_add(spu->number, spu->number);
+	spu_buff_add(spu->pid, spu->number);
+	spu_buff_add(spu->tgid, spu->number);
+	spu_buff_add(app_dcookie, spu->number);
+	spu_buff_add(spu_cookie, spu->number);
+	spu_buff_add(offset, spu->number);
+
+	/* Set flag to indicate SPU PC data can now be written out.  If
+	 * the SPU program counter data is seen before an SPU context
+	 * record is seen, the postprocessing will fail.
+	 */
+	spu_buff[spu->number].ctx_sw_seen = 1;
+
 	spin_unlock_irqrestore(&buffer_lock, flags);
 	smp_wmb();	/* insure spu event buffer updates are written */
 			/* don't want entries intermingled... */
@@ -360,6 +462,47 @@
         return nodes;
 }
 
+static int oprofile_spu_buff_create(void)
+{
+	int spu;
+
+	max_spu_buff = oprofile_get_cpu_buffer_size();
+
+	for (spu = 0; spu < num_spu_nodes; spu++) {
+		/* create circular buffers to store the data in.
+		 * use locks to manage accessing the buffers
+		 */
+		spu_buff[spu].head = 0;
+		spu_buff[spu].tail = 0;
+
+		/*
+		 * Create a buffer for each SPU.  Can't reliably
+		 * create a single buffer for all spus due to not
+		 * enough contiguous kernel memory.
+		 */
+
+		spu_buff[spu].buff = kzalloc((max_spu_buff
+					      * sizeof(unsigned long)),
+					     GFP_KERNEL);
+
+		if (!spu_buff[spu].buff) {
+			printk(KERN_ERR "SPU_PROF: "
+			       "%s, line %d:  oprofile_spu_buff_create "
+		       "failed to allocate spu buffer %d.\n",
+			       __func__, __LINE__, spu);
+
+			/* release the spu buffers that have been allocated */
+			while (spu >= 0) {
+				kfree(spu_buff[spu].buff);
+				spu_buff[spu].buff = 0;
+				spu--;
+			}
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
 /* The main purpose of this function is to synchronize
  * OProfile with SPUFS by registering to be notified of
  * SPU task switches.
@@ -372,20 +515,35 @@
  */
 int spu_sync_start(void)
 {
-	int k;
+	int spu;
 	int ret = SKIP_GENERIC_SYNC;
 	int register_ret;
 	unsigned long flags = 0;
 
 	spu_prof_num_nodes = number_of_online_nodes();
 	num_spu_nodes = spu_prof_num_nodes * 8;
+	INIT_DELAYED_WORK(&spu_work, wq_sync_spu_buff);
+
+	/* create buffer for storing the SPU data to put in
+	 * the kernel buffer.
+	 */
+	ret = oprofile_spu_buff_create();
+	if (ret)
+		goto out;
 
 	spin_lock_irqsave(&buffer_lock, flags);
-	add_event_entry(ESCAPE_CODE);
-	add_event_entry(SPU_PROFILING_CODE);
-	add_event_entry(num_spu_nodes);
+	for (spu = 0; spu < num_spu_nodes; spu++) {
+		spu_buff_add(ESCAPE_CODE, spu);
+		spu_buff_add(SPU_PROFILING_CODE, spu);
+		spu_buff_add(num_spu_nodes, spu);
+	}
 	spin_unlock_irqrestore(&buffer_lock, flags);
 
+	for (spu = 0; spu < num_spu_nodes; spu++) {
+		spu_buff[spu].ctx_sw_seen = 0;
+		spu_buff[spu].last_guard_val = 0;
+	}
+
 	/* Register for SPU events  */
 	register_ret = spu_switch_event_register(&spu_active);
 	if (register_ret) {
@@ -393,8 +551,6 @@
 		goto out;
 	}
 
-	for (k = 0; k < (MAX_NUMNODES * 8); k++)
-		last_guard_val[k] = 0;
 	pr_debug("spu_sync_start -- running.\n");
 out:
 	return ret;
@@ -446,13 +602,20 @@
 		 * use.	 We need to discard samples taken during the time
 		 * period which an overlay occurs (i.e., guard value changes).
 		 */
-		if (grd_val && grd_val != last_guard_val[spu_num]) {
-			last_guard_val[spu_num] = grd_val;
+		if (grd_val && grd_val != spu_buff[spu_num].last_guard_val) {
+			spu_buff[spu_num].last_guard_val = grd_val;
 			/* Drop the rest of the samples. */
 			break;
 		}
 
-		add_event_entry(file_offset | spu_num_shifted);
+		/* We must ensure that the SPU context switch has been written
+		 * out before samples for the SPU.  Otherwise, the SPU context
+		 * information is not available and the postprocessing of the
+		 * SPU PC will fail with no available anonymous map information.
+		 */
+		if (spu_buff[spu_num].ctx_sw_seen)
+			spu_buff_add((file_offset | spu_num_shifted),
+					 spu_num);
 	}
 	spin_unlock(&buffer_lock);
 out:
@@ -463,20 +626,41 @@
 int spu_sync_stop(void)
 {
 	unsigned long flags = 0;
-	int ret = spu_switch_event_unregister(&spu_active);
-	if (ret) {
+	int ret;
+	int k;
+
+	ret = spu_switch_event_unregister(&spu_active);
+
+	if (ret)
 		printk(KERN_ERR "SPU_PROF: "
-			"%s, line %d: spu_switch_event_unregister returned %d\n",
-			__func__, __LINE__, ret);
-		goto out;
-	}
+		       "%s, line %d: spu_switch_event_unregister "	\
+		       "returned %d\n",
+		       __func__, __LINE__, ret);
+
+	/* flush any remaining data in the per SPU buffers */
+	sync_spu_buff();
 
 	spin_lock_irqsave(&cache_lock, flags);
 	ret = release_cached_info(RELEASE_ALL);
 	spin_unlock_irqrestore(&cache_lock, flags);
-out:
+
+	/* remove scheduled work queue item rather then waiting
+	 * for every queued entry to execute.  Then flush pending
+	 * system wide buffer to event buffer.
+	 */
+	cancel_delayed_work(&spu_work);
+
+	for (k = 0; k < num_spu_nodes; k++) {
+		spu_buff[k].ctx_sw_seen = 0;
+
+		/*
+		 * spu_sys_buff will be null if there was a problem
+		 * allocating the buffer.  Only delete if it exists.
+		 */
+		kfree(spu_buff[k].buff);
+		spu_buff[k].buff = 0;
+	}
 	pr_debug("spu_sync_stop -- done.\n");
 	return ret;
 }
 
-
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 5ff4de3..35141a8 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -404,7 +404,7 @@
 	}
 }
 
-static inline void enable_ctr(u32 cpu, u32 ctr, u32 * pm07_cntrl)
+static inline void enable_ctr(u32 cpu, u32 ctr, u32 *pm07_cntrl)
 {
 
 	pm07_cntrl[ctr] |= CBE_PM_CTR_ENABLE;
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index a9260e2..6573027 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -14,6 +14,15 @@
 #	help
 #	  This option enables support for the CPCI405 board.
 
+config ACADIA
+	bool "Acadia"
+	depends on 40x
+	default n
+	select PPC40x_SIMPLE
+	select 405EZ
+	help
+	  This option enables support for the AMCC 405EZ Acadia evaluation board.
+
 config EP405
 	bool "EP405/EP405PC"
 	depends on 40x
@@ -23,6 +32,14 @@
 	help
 	  This option enables support for the EP405/EP405PC boards.
 
+config HCU4
+	bool "Hcu4"
+	depends on 40x
+	default y
+	select 405GPR
+	help
+	  This option enables support for the Nestal Maschinen HCU4 board.
+
 config KILAUEA
 	bool "Kilauea"
 	depends on 40x
@@ -93,6 +110,13 @@
 	  Most Virtex designs should use this unless it needs to do some
 	  special configuration at board probe time.
 
+config PPC40x_SIMPLE
+	bool "Simple PowerPC 40x board support"
+	depends on 40x
+	default n
+	help
+	  This option enables the simple PowerPC 40x platform support.
+
 # 40x specific CPU modules, selected based on the board above.
 config NP405H
 	bool
@@ -118,6 +142,12 @@
 	select IBM_NEW_EMAC_EMAC4
 	select IBM_NEW_EMAC_RGMII
 
+config 405EZ
+	bool
+	select IBM_NEW_EMAC_NO_FLOW_CTRL
+	select IBM_NEW_EMAC_MAL_CLR_ICINTSTAT
+	select IBM_NEW_EMAC_MAL_COMMON_ERR
+
 config 405GPR
 	bool
 
@@ -139,6 +169,14 @@
 	select IBM405_ERR77
 	select IBM405_ERR51
 
+config PPC4xx_GPIO
+	bool "PPC4xx GPIO support"
+	depends on 40x
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
+	help
+	  Enable gpiolib support for ppc40x based boards
+
 # 40x errata/workaround config symbols, selected by the CPU models above
 
 # All 405-based cores up until the 405GPR and 405EP have this errata.
diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile
index 5533a5c..9bab76a6 100644
--- a/arch/powerpc/platforms/40x/Makefile
+++ b/arch/powerpc/platforms/40x/Makefile
@@ -1,5 +1,7 @@
 obj-$(CONFIG_KILAUEA)				+= kilauea.o
+obj-$(CONFIG_HCU4)				+= hcu4.o
 obj-$(CONFIG_MAKALU)				+= makalu.o
 obj-$(CONFIG_WALNUT)				+= walnut.o
 obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD)	+= virtex.o
 obj-$(CONFIG_EP405)				+= ep405.o
+obj-$(CONFIG_PPC40x_SIMPLE)		+= ppc40x_simple.o
diff --git a/arch/powerpc/platforms/40x/hcu4.c b/arch/powerpc/platforms/40x/hcu4.c
new file mode 100644
index 0000000..60b2afe
--- /dev/null
+++ b/arch/powerpc/platforms/40x/hcu4.c
@@ -0,0 +1,61 @@
+/*
+ * Architecture- / platform-specific boot-time initialization code for
+ * IBM PowerPC 4xx based boards. Adapted from original
+ * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
+ * <dan@net4x.com>.
+ *
+ * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Copyright 2007 IBM Corporation
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+
+static __initdata struct of_device_id hcu4_of_bus[] = {
+	{ .compatible = "ibm,plb3", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+static int __init hcu4_device_probe(void)
+{
+	of_platform_bus_probe(NULL, hcu4_of_bus, NULL);
+	return 0;
+}
+machine_device_initcall(hcu4, hcu4_device_probe);
+
+static int __init hcu4_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "netstal,hcu4"))
+		return 0;
+
+	return 1;
+}
+
+define_machine(hcu4) {
+	.name			= "HCU4",
+	.probe			= hcu4_probe,
+	.progress		= udbg_progress,
+	.init_IRQ		= uic_init_tree,
+	.get_irq		= uic_get_irq,
+	.restart		= ppc4xx_reset_system,
+	.calibrate_decr		= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
new file mode 100644
index 0000000..4498a86
--- /dev/null
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -0,0 +1,80 @@
+/*
+ * Generic PowerPC 40x platform support
+ *
+ * Copyright 2008 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ *
+ * This implements simple platform support for PowerPC 44x chips.  This is
+ * mostly used for eval boards or other simple and "generic" 44x boards.  If
+ * your board has custom functions or hardware, then you will likely want to
+ * implement your own board.c file to accommodate it.
+ */
+
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+#include <asm/uic.h>
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+static __initdata struct of_device_id ppc40x_of_bus[] = {
+	{ .compatible = "ibm,plb3", },
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init ppc40x_device_probe(void)
+{
+	of_platform_bus_probe(NULL, ppc40x_of_bus, NULL);
+
+	return 0;
+}
+machine_device_initcall(ppc40x_simple, ppc40x_device_probe);
+
+/* This is the list of boards that can be supported by this simple
+ * platform code.  This does _not_ mean the boards are compatible,
+ * as they most certainly are not from a device tree perspective.
+ * However, their differences are handled by the device tree and the
+ * drivers and therefore they don't need custom board support files.
+ *
+ * Again, if your board needs to do things differently then create a
+ * board.c file for it rather than adding it to this list.
+ */
+static char *board[] __initdata = {
+	"amcc,acadia"
+};
+
+static int __init ppc40x_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+	int i = 0;
+
+	for (i = 0; i < ARRAY_SIZE(board); i++) {
+		if (of_flat_dt_is_compatible(root, board[i])) {
+			ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+define_machine(ppc40x_simple) {
+	.name = "PowerPC 40x Platform",
+	.probe = ppc40x_probe,
+	.progress = udbg_progress,
+	.init_IRQ = uic_init_tree,
+	.get_irq = uic_get_irq,
+	.restart = ppc4xx_reset_system,
+	.calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 79c1154..3496bc05 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -167,6 +167,14 @@
 	help
 	  This option enables the simple PowerPC 44x platform support.
 
+config PPC4xx_GPIO
+	bool "PPC4xx GPIO support"
+	depends on 44x
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
+	help
+	  Enable gpiolib support for ppc440 based boards
+
 # 44x specific CPU modules, selected based on the board above.
 config 440EP
 	bool
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 044b4e6..ae7c34f 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -99,11 +99,14 @@
 	out_be32(&xlb->master_pri_enable, 0xff);
 	out_be32(&xlb->master_priority, 0x11111111);
 
-	/* Disable XLB pipelining
+	/*
+	 * Disable XLB pipelining
 	 * (cfr errate 292. We could do this only just before ATA PIO
 	 *  transaction and re-enable it afterwards ...)
+	 * Not needed on MPC5200B.
 	 */
-	out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
+	if ((mfspr(SPRN_SVR) & MPC5200_SVR_MASK) == MPC5200_SVR)
+		out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
 
 	iounmap(xlb);
 }
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
index 8a3b117..81cee7b 100644
--- a/arch/powerpc/platforms/85xx/ksi8560.c
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -193,7 +193,6 @@
 static void ksi8560_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
-	uint memsize = total_memory;
 
 	pvid = mfspr(SPRN_PVR);
 	svid = mfspr(SPRN_SVR);
@@ -215,9 +214,6 @@
 	/* Display cpu Pll setting */
 	phid1 = mfspr(SPRN_HID1);
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 static struct of_device_id __initdata of_bus_ids[] = {
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 0293e3d..21f0090 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -207,7 +207,6 @@
 static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
-	uint memsize = total_memory;
 
 	pvid = mfspr(SPRN_PVR);
 	svid = mfspr(SPRN_SVR);
@@ -219,9 +218,6 @@
 	/* Display cpu Pll setting */
 	phid1 = mfspr(SPRN_HID1);
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 static struct of_device_id __initdata of_bus_ids[] = {
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 50d7ea8f..aeb6a5b 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -307,7 +307,6 @@
 static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
-	uint memsize = total_memory;
 
 	pvid = mfspr(SPRN_PVR);
 	svid = mfspr(SPRN_SVR);
@@ -320,9 +319,6 @@
 	/* Display cpu Pll setting */
 	phid1 = mfspr(SPRN_HID1);
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 
diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
index b9246ea..7ec77ce 100644
--- a/arch/powerpc/platforms/85xx/sbc8548.c
+++ b/arch/powerpc/platforms/85xx/sbc8548.c
@@ -136,7 +136,6 @@
 static void sbc8548_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
-	uint memsize = total_memory;
 
 	pvid = mfspr(SPRN_PVR);
 	svid = mfspr(SPRN_SVR);
@@ -149,9 +148,6 @@
 	/* Display cpu Pll setting */
 	phid1 = mfspr(SPRN_HID1);
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 static struct of_device_id __initdata of_bus_ids[] = {
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index 0c9a856..472f254 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -194,7 +194,6 @@
 static void sbc8560_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
-	uint memsize = total_memory;
 
 	pvid = mfspr(SPRN_PVR);
 	svid = mfspr(SPRN_SVR);
@@ -206,9 +205,6 @@
 	/* Display cpu Pll setting */
 	phid1 = mfspr(SPRN_HID1);
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 static struct of_device_id __initdata of_bus_ids[] = {
diff --git a/arch/powerpc/platforms/85xx/stx_gp3.c b/arch/powerpc/platforms/85xx/stx_gp3.c
index 18499d7..0cca8f5 100644
--- a/arch/powerpc/platforms/85xx/stx_gp3.c
+++ b/arch/powerpc/platforms/85xx/stx_gp3.c
@@ -130,7 +130,6 @@
 static void stx_gp3_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
-	uint memsize = total_memory;
 
 	pvid = mfspr(SPRN_PVR);
 	svid = mfspr(SPRN_SVR);
@@ -142,9 +141,6 @@
 	/* Display cpu Pll setting */
 	phid1 = mfspr(SPRN_HID1);
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 static struct of_device_id __initdata of_bus_ids[] = {
diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c
index d850880..2933a8e 100644
--- a/arch/powerpc/platforms/85xx/tqm85xx.c
+++ b/arch/powerpc/platforms/85xx/tqm85xx.c
@@ -138,7 +138,6 @@
 static void tqm85xx_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
-	uint memsize = total_memory;
 
 	pvid = mfspr(SPRN_PVR);
 	svid = mfspr(SPRN_SVR);
@@ -150,9 +149,6 @@
 	/* Display cpu Pll setting */
 	phid1 = mfspr(SPRN_HID1);
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 static struct of_device_id __initdata of_bus_ids[] = {
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index 821c45f..fb371f5 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -127,7 +127,6 @@
 
 static void gef_sbc610_show_cpuinfo(struct seq_file *m)
 {
-	uint memsize = total_memory;
 	uint svid = mfspr(SPRN_SVR);
 
 	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
@@ -137,7 +136,6 @@
 	seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev());
 
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 static void __init gef_sbc610_nec_fixup(struct pci_dev *pdev)
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 2672829..27e0e68 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -101,13 +101,11 @@
 static void
 mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
 {
-	uint memsize = total_memory;
 	uint svid = mfspr(SPRN_SVR);
 
 	seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
 
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
index da677a7..5fd7ed4 100644
--- a/arch/powerpc/platforms/86xx/sbc8641d.c
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -63,13 +63,11 @@
 static void
 sbc8641_show_cpuinfo(struct seq_file *m)
 {
-	uint memsize = total_memory;
 	uint svid = mfspr(SPRN_SVR);
 
 	seq_printf(m, "Vendor\t\t: Wind River Systems\n");
 
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
 
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 2a14b05..665af1c 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -21,6 +21,7 @@
 #include <asm/machdep.h>
 #include <asm/rtas.h>
 #include <asm/cell-regs.h>
+#include <asm/kdump.h>
 
 #include "ras.h"
 
@@ -111,9 +112,8 @@
 	int ret = -ENOMEM;
 	unsigned long addr;
 
-#ifdef CONFIG_CRASH_DUMP
-	rtas_call(ptcal_stop_tok, 1, 1, NULL, nid);
-#endif
+	if (__kdump_flag)
+		rtas_call(ptcal_stop_tok, 1, 1, NULL, nid);
 
 	area = kmalloc(sizeof(*area), GFP_KERNEL);
 	if (!area)
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index efb3964..c0d86e1 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -54,8 +54,8 @@
 #endif
 
 /*
- * The primary thread of each non-boot processor is recorded here before
- * smp init.
+ * The Primary thread of each non-boot processor was started from the OF client
+ * interface by prom_hold_cpus and is spinning on secondary_hold_spinloop.
  */
 static cpumask_t of_spin_map;
 
@@ -208,11 +208,7 @@
 	/* Mark threads which are still spinning in hold loops. */
 	if (cpu_has_feature(CPU_FTR_SMT)) {
 		for_each_present_cpu(i) {
-			if (i % 2 == 0)
-				/*
-				 * Even-numbered logical cpus correspond to
-				 * primary threads.
-				 */
+			if (cpu_thread_in_core(i) == 0)
 				cpu_set(i, of_spin_map);
 		}
 	} else {
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 010a51f..b73c369 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -548,6 +548,11 @@
 	int ret;
 	struct spu_context *ctx = file->private_data;
 
+	/* pre-check for file position: if we'd return EOF, there's no point
+	 * causing a deschedule */
+	if (*pos >= sizeof(ctx->csa.lscsa->gprs))
+		return 0;
+
 	ret = spu_acquire_saved(ctx);
 	if (ret)
 		return ret;
@@ -2426,38 +2431,49 @@
 static int spufs_switch_log_open(struct inode *inode, struct file *file)
 {
 	struct spu_context *ctx = SPUFS_I(inode)->i_ctx;
+	int rc;
 
-	/*
-	 * We (ab-)use the mapping_lock here because it serves the similar
-	 * purpose for synchronizing open/close elsewhere.  Maybe it should
-	 * be renamed eventually.
-	 */
-	mutex_lock(&ctx->mapping_lock);
+	rc = spu_acquire(ctx);
+	if (rc)
+		return rc;
+
 	if (ctx->switch_log) {
-		spin_lock(&ctx->switch_log->lock);
-		ctx->switch_log->head = 0;
-		ctx->switch_log->tail = 0;
-		spin_unlock(&ctx->switch_log->lock);
-	} else {
-		/*
-		 * We allocate the switch log data structures on first open.
-		 * They will never be free because we assume a context will
-		 * be traced until it goes away.
-		 */
-		ctx->switch_log = kzalloc(sizeof(struct switch_log) +
-			SWITCH_LOG_BUFSIZE * sizeof(struct switch_log_entry),
-			GFP_KERNEL);
-		if (!ctx->switch_log)
-			goto out;
-		spin_lock_init(&ctx->switch_log->lock);
-		init_waitqueue_head(&ctx->switch_log->wait);
+		rc = -EBUSY;
+		goto out;
 	}
-	mutex_unlock(&ctx->mapping_lock);
+
+	ctx->switch_log = kmalloc(sizeof(struct switch_log) +
+		SWITCH_LOG_BUFSIZE * sizeof(struct switch_log_entry),
+		GFP_KERNEL);
+
+	if (!ctx->switch_log) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	ctx->switch_log->head = ctx->switch_log->tail = 0;
+	init_waitqueue_head(&ctx->switch_log->wait);
+	rc = 0;
+
+out:
+	spu_release(ctx);
+	return rc;
+}
+
+static int spufs_switch_log_release(struct inode *inode, struct file *file)
+{
+	struct spu_context *ctx = SPUFS_I(inode)->i_ctx;
+	int rc;
+
+	rc = spu_acquire(ctx);
+	if (rc)
+		return rc;
+
+	kfree(ctx->switch_log);
+	ctx->switch_log = NULL;
+	spu_release(ctx);
 
 	return 0;
- out:
-	mutex_unlock(&ctx->mapping_lock);
-	return -ENOMEM;
 }
 
 static int switch_log_sprint(struct spu_context *ctx, char *tbuf, int n)
@@ -2485,42 +2501,54 @@
 	if (!buf || len < 0)
 		return -EINVAL;
 
+	error = spu_acquire(ctx);
+	if (error)
+		return error;
+
 	while (cnt < len) {
 		char tbuf[128];
 		int width;
 
-		if (file->f_flags & O_NONBLOCK) {
-			if (spufs_switch_log_used(ctx) <= 0)
-				return cnt ? cnt : -EAGAIN;
-		} else {
-			/* Wait for data in buffer */
-			error = wait_event_interruptible(ctx->switch_log->wait,
-					spufs_switch_log_used(ctx) > 0);
-			if (error)
+		if (spufs_switch_log_used(ctx) == 0) {
+			if (cnt > 0) {
+				/* If there's data ready to go, we can
+				 * just return straight away */
 				break;
-		}
 
-		spin_lock(&ctx->switch_log->lock);
-		if (ctx->switch_log->head == ctx->switch_log->tail) {
-			/* multiple readers race? */
-			spin_unlock(&ctx->switch_log->lock);
-			continue;
+			} else if (file->f_flags & O_NONBLOCK) {
+				error = -EAGAIN;
+				break;
+
+			} else {
+				/* spufs_wait will drop the mutex and
+				 * re-acquire, but since we're in read(), the
+				 * file cannot be _released (and so
+				 * ctx->switch_log is stable).
+				 */
+				error = spufs_wait(ctx->switch_log->wait,
+						spufs_switch_log_used(ctx) > 0);
+
+				/* On error, spufs_wait returns without the
+				 * state mutex held */
+				if (error)
+					return error;
+
+				/* We may have had entries read from underneath
+				 * us while we dropped the mutex in spufs_wait,
+				 * so re-check */
+				if (spufs_switch_log_used(ctx) == 0)
+					continue;
+			}
 		}
 
 		width = switch_log_sprint(ctx, tbuf, sizeof(tbuf));
-		if (width < len) {
+		if (width < len)
 			ctx->switch_log->tail =
 				(ctx->switch_log->tail + 1) %
 				 SWITCH_LOG_BUFSIZE;
-		}
-
-		spin_unlock(&ctx->switch_log->lock);
-
-		/*
-		 * If the record is greater than space available return
-		 * partial buffer (so far)
-		 */
-		if (width >= len)
+		else
+			/* If the record is greater than space available return
+			 * partial buffer (so far) */
 			break;
 
 		error = copy_to_user(buf + cnt, tbuf, width);
@@ -2529,6 +2557,8 @@
 		cnt += width;
 	}
 
+	spu_release(ctx);
+
 	return cnt == 0 ? error : cnt;
 }
 
@@ -2537,29 +2567,41 @@
 	struct inode *inode = file->f_path.dentry->d_inode;
 	struct spu_context *ctx = SPUFS_I(inode)->i_ctx;
 	unsigned int mask = 0;
+	int rc;
 
 	poll_wait(file, &ctx->switch_log->wait, wait);
 
+	rc = spu_acquire(ctx);
+	if (rc)
+		return rc;
+
 	if (spufs_switch_log_used(ctx) > 0)
 		mask |= POLLIN;
 
+	spu_release(ctx);
+
 	return mask;
 }
 
 static const struct file_operations spufs_switch_log_fops = {
-	.owner	= THIS_MODULE,
-	.open	= spufs_switch_log_open,
-	.read	= spufs_switch_log_read,
-	.poll	= spufs_switch_log_poll,
+	.owner		= THIS_MODULE,
+	.open		= spufs_switch_log_open,
+	.read		= spufs_switch_log_read,
+	.poll		= spufs_switch_log_poll,
+	.release	= spufs_switch_log_release,
 };
 
+/**
+ * Log a context switch event to a switch log reader.
+ *
+ * Must be called with ctx->state_mutex held.
+ */
 void spu_switch_log_notify(struct spu *spu, struct spu_context *ctx,
 		u32 type, u32 val)
 {
 	if (!ctx->switch_log)
 		return;
 
-	spin_lock(&ctx->switch_log->lock);
 	if (spufs_switch_log_avail(ctx) > 1) {
 		struct switch_log_entry *p;
 
@@ -2573,7 +2615,6 @@
 		ctx->switch_log->head =
 			(ctx->switch_log->head + 1) % SWITCH_LOG_BUFSIZE;
 	}
-	spin_unlock(&ctx->switch_log->lock);
 
 	wake_up(&ctx->switch_log->wait);
 }
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index c9bb7cf..c58bd36 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -249,6 +249,7 @@
 
 	spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED);
 	clear_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags);
+	spu_switch_log_notify(NULL, ctx, SWITCH_LOG_EXIT, *status);
 	spu_release(ctx);
 
 	if (signal_pending(current))
@@ -417,8 +418,6 @@
 	ret = spu_run_fini(ctx, npc, &status);
 	spu_yield(ctx);
 
-	spu_switch_log_notify(NULL, ctx, SWITCH_LOG_EXIT, status);
-
 	if ((status & SPU_STATUS_STOPPED_BY_STOP) &&
 	    (((status >> SPU_STOP_STATUS_SHIFT) & 0x3f00) == 0x2100))
 		ctx->stats.libassist++;
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 67595bc..2ad914c 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -312,6 +312,15 @@
 	 */
 	node = cpu_to_node(raw_smp_processor_id());
 	for (n = 0; n < MAX_NUMNODES; n++, node++) {
+		/*
+		 * "available_spus" counts how many spus are not potentially
+		 * going to be used by other affinity gangs whose reference
+		 * context is already in place. Although this code seeks to
+		 * avoid having affinity gangs with a summed amount of
+		 * contexts bigger than the amount of spus in the node,
+		 * this may happen sporadically. In this case, available_spus
+		 * becomes negative, which is harmless.
+		 */
 		int available_spus;
 
 		node = (node < MAX_NUMNODES) ? node : 0;
@@ -321,12 +330,10 @@
 		available_spus = 0;
 		mutex_lock(&cbe_spu_info[node].list_mutex);
 		list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
-			if (spu->ctx && spu->ctx->gang
-					&& spu->ctx->aff_offset == 0)
-				available_spus -=
-					(spu->ctx->gang->contexts - 1);
-			else
-				available_spus++;
+			if (spu->ctx && spu->ctx->gang && !spu->ctx->aff_offset
+					&& spu->ctx->gang->aff_ref_spu)
+				available_spus -= spu->ctx->gang->contexts;
+			available_spus++;
 		}
 		if (available_spus < ctx->gang->contexts) {
 			mutex_unlock(&cbe_spu_info[node].list_mutex);
@@ -437,6 +444,11 @@
 		atomic_dec(&cbe_spu_info[spu->node].reserved_spus);
 
 	if (ctx->gang)
+		/*
+		 * If ctx->gang->aff_sched_count is positive, SPU affinity is
+		 * being considered in this gang. Using atomic_dec_if_positive
+		 * allow us to skip an explicit check for affinity in this gang
+		 */
 		atomic_dec_if_positive(&ctx->gang->aff_sched_count);
 
 	spu_switch_notify(spu, NULL);
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index 8ae8ef9..15c62d3 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -65,7 +65,6 @@
 };
 
 struct switch_log {
-	spinlock_t		lock;
 	wait_queue_head_t	wait;
 	unsigned long		head;
 	unsigned long		tail;
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c
index 2ece399..d0b1f3f 100644
--- a/arch/powerpc/platforms/cell/spufs/sputrace.c
+++ b/arch/powerpc/platforms/cell/spufs/sputrace.c
@@ -40,6 +40,7 @@
 static ktime_t sputrace_start;
 static unsigned long sputrace_head, sputrace_tail;
 static struct sputrace *sputrace_log;
+static int sputrace_logging;
 
 static int sputrace_used(void)
 {
@@ -79,6 +80,11 @@
 		char tbuf[128];
 		int width;
 
+		/* If we have data ready to return, don't block waiting
+		 * for more */
+		if (cnt > 0 && sputrace_used() == 0)
+			break;
+
 		error = wait_event_interruptible(sputrace_wait,
 						 sputrace_used() > 0);
 		if (error)
@@ -109,24 +115,49 @@
 
 static int sputrace_open(struct inode *inode, struct file *file)
 {
+	int rc;
+
 	spin_lock(&sputrace_lock);
+	if (sputrace_logging) {
+		rc = -EBUSY;
+		goto out;
+	}
+
+	sputrace_logging = 1;
 	sputrace_head = sputrace_tail = 0;
 	sputrace_start = ktime_get();
-	spin_unlock(&sputrace_lock);
+	rc = 0;
 
+out:
+	spin_unlock(&sputrace_lock);
+	return rc;
+}
+
+static int sputrace_release(struct inode *inode, struct file *file)
+{
+	spin_lock(&sputrace_lock);
+	sputrace_logging = 0;
+	spin_unlock(&sputrace_lock);
 	return 0;
 }
 
 static const struct file_operations sputrace_fops = {
-	.owner	= THIS_MODULE,
-	.open	= sputrace_open,
-	.read	= sputrace_read,
+	.owner   = THIS_MODULE,
+	.open    = sputrace_open,
+	.read    = sputrace_read,
+	.release = sputrace_release,
 };
 
 static void sputrace_log_item(const char *name, struct spu_context *ctx,
 		struct spu *spu)
 {
 	spin_lock(&sputrace_lock);
+
+	if (!sputrace_logging) {
+		spin_unlock(&sputrace_lock);
+		return;
+	}
+
 	if (sputrace_avail() > 1) {
 		struct sputrace *t = sputrace_log + sputrace_head;
 
diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c
index 49c8776..c23617c 100644
--- a/arch/powerpc/platforms/cell/spufs/syscalls.c
+++ b/arch/powerpc/platforms/cell/spufs/syscalls.c
@@ -69,9 +69,9 @@
 	if (!IS_ERR(tmp)) {
 		struct nameidata nd;
 
-		ret = path_lookup(tmp, LOOKUP_PARENT|
-				LOOKUP_OPEN|LOOKUP_CREATE, &nd);
+		ret = path_lookup(tmp, LOOKUP_PARENT, &nd);
 		if (!ret) {
+			nd.flags |= LOOKUP_OPEN | LOOKUP_CREATE;
 			ret = spufs_create(&nd, flags, mode, neighbor);
 			path_put(&nd.path);
 		}
diff --git a/arch/powerpc/platforms/embedded6xx/c2k.c b/arch/powerpc/platforms/embedded6xx/c2k.c
index d0b25b8..32ba0fa0 100644
--- a/arch/powerpc/platforms/embedded6xx/c2k.c
+++ b/arch/powerpc/platforms/embedded6xx/c2k.c
@@ -116,10 +116,7 @@
 
 void c2k_show_cpuinfo(struct seq_file *m)
 {
-	uint memsize = total_memory;
-
 	seq_printf(m, "Vendor\t\t: GEFanuc\n");
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 	seq_printf(m, "coherency\t: %s\n", COHERENCY_SETTING);
 }
 
diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
index 5a19b9a1..4c485e9 100644
--- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c
+++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
@@ -119,10 +119,7 @@
 
 void prpmc2800_show_cpuinfo(struct seq_file *m)
 {
-	uint memsize = total_memory;
-
 	seq_printf(m, "Vendor\t\t: Motorola\n");
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 	seq_printf(m, "coherency\t: %s\n", PPRPM2800_COHERENCY_SETTING);
 }
 
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 140d02a..a623ad2 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -22,6 +22,12 @@
 	int ret;
 
 	start_pfn = base >> PAGE_SHIFT;
+
+	if (!pfn_valid(start_pfn)) {
+		lmb_remove(base, lmb_size);
+		return 0;
+	}
+
 	zone = page_zone(pfn_to_page(start_pfn));
 
 	/*
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index a8c4466..d56491d 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -44,6 +44,7 @@
 #include <asm/tce.h>
 #include <asm/ppc-pci.h>
 #include <asm/udbg.h>
+#include <asm/kdump.h>
 
 #include "plpar_wrappers.h"
 
@@ -291,9 +292,8 @@
 
 	tbl->it_base = (unsigned long)__va(*basep);
 
-#ifndef CONFIG_CRASH_DUMP
-	memset((void *)tbl->it_base, 0, *sizep);
-#endif
+	if (!__kdump_flag)
+		memset((void *)tbl->it_base, 0, *sizep);
 
 	tbl->it_busno = phb->bus->number;
 
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index e00f96b..1a231c3 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -52,8 +52,8 @@
 
 
 /*
- * The primary thread of each non-boot processor is recorded here before
- * smp init.
+ * The Primary thread of each non-boot processor was started from the OF client
+ * interface by prom_hold_cpus and is spinning on secondary_hold_spinloop.
  */
 static cpumask_t of_spin_map;
 
@@ -161,8 +161,7 @@
 static int smp_pSeries_cpu_bootable(unsigned int nr)
 {
 	/* Special case - we inhibit secondary thread startup
-	 * during boot if the user requests it.  Odd-numbered
-	 * cpus are assumed to be secondary threads.
+	 * during boot if the user requests it.
 	 */
 	if (system_state < SYSTEM_RUNNING &&
 	    cpu_has_feature(CPU_FTR_SMT) &&
@@ -199,11 +198,7 @@
 	/* Mark threads which are still spinning in hold loops. */
 	if (cpu_has_feature(CPU_FTR_SMT)) {
 		for_each_present_cpu(i) { 
-			if (i % 2 == 0)
-				/*
-				 * Even-numbered logical cpus correspond to
-				 * primary threads.
-				 */
+			if (cpu_thread_in_core(i) == 0)
 				cpu_set(i, of_spin_map);
 		}
 	} else {
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index a44709a..5afce11 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -37,6 +37,7 @@
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_4xx)		+= ppc4xx_pci.o
 endif
+obj-$(CONFIG_PPC4xx_GPIO)	+= ppc4xx_gpio.o
 
 obj-$(CONFIG_CPM)		+= cpm_common.o
 obj-$(CONFIG_CPM2)		+= cpm2.o cpm2_pic.o
diff --git a/arch/powerpc/sysdev/ppc4xx_gpio.c b/arch/powerpc/sysdev/ppc4xx_gpio.c
new file mode 100644
index 0000000..110efe2
--- /dev/null
+++ b/arch/powerpc/sysdev/ppc4xx_gpio.c
@@ -0,0 +1,217 @@
+/*
+ * PPC4xx gpio driver
+ *
+ * Copyright (c) 2008 Harris Corporation
+ * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Steve Falco <sfalco@harris.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/types.h>
+
+#define GPIO_MASK(gpio)		(0x80000000 >> (gpio))
+#define GPIO_MASK2(gpio)	(0xc0000000 >> ((gpio) * 2))
+
+/* Physical GPIO register layout */
+struct ppc4xx_gpio {
+	__be32 or;
+	__be32 tcr;
+	__be32 osrl;
+	__be32 osrh;
+	__be32 tsrl;
+	__be32 tsrh;
+	__be32 odr;
+	__be32 ir;
+	__be32 rr1;
+	__be32 rr2;
+	__be32 rr3;
+	__be32 reserved1;
+	__be32 isr1l;
+	__be32 isr1h;
+	__be32 isr2l;
+	__be32 isr2h;
+	__be32 isr3l;
+	__be32 isr3h;
+};
+
+struct ppc4xx_gpio_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+};
+
+/*
+ * GPIO LIB API implementation for GPIOs
+ *
+ * There are a maximum of 32 gpios in each gpio controller.
+ */
+
+static inline struct ppc4xx_gpio_chip *
+to_ppc4xx_gpiochip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct ppc4xx_gpio_chip, mm_gc);
+}
+
+static int ppc4xx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+
+	return in_be32(&regs->ir) & GPIO_MASK(gpio);
+}
+
+static inline void
+__ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+
+	if (val)
+		setbits32(&regs->or, GPIO_MASK(gpio));
+	else
+		clrbits32(&regs->or, GPIO_MASK(gpio));
+}
+
+static void
+ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	__ppc4xx_gpio_set(gc, gpio, val);
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+}
+
+static int ppc4xx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc);
+	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	/* Disable open-drain function */
+	clrbits32(&regs->odr, GPIO_MASK(gpio));
+
+	/* Float the pin */
+	clrbits32(&regs->tcr, GPIO_MASK(gpio));
+
+	/* Bits 0-15 use TSRL/OSRL, bits 16-31 use TSRH/OSRH */
+	if (gpio < 16) {
+		clrbits32(&regs->osrl, GPIO_MASK2(gpio));
+		clrbits32(&regs->tsrl, GPIO_MASK2(gpio));
+	} else {
+		clrbits32(&regs->osrh, GPIO_MASK2(gpio));
+		clrbits32(&regs->tsrh, GPIO_MASK2(gpio));
+	}
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int
+ppc4xx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc);
+	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->lock, flags);
+
+	/* First set initial value */
+	__ppc4xx_gpio_set(gc, gpio, val);
+
+	/* Disable open-drain function */
+	clrbits32(&regs->odr, GPIO_MASK(gpio));
+
+	/* Drive the pin */
+	setbits32(&regs->tcr, GPIO_MASK(gpio));
+
+	/* Bits 0-15 use TSRL, bits 16-31 use TSRH */
+	if (gpio < 16) {
+		clrbits32(&regs->osrl, GPIO_MASK2(gpio));
+		clrbits32(&regs->tsrl, GPIO_MASK2(gpio));
+	} else {
+		clrbits32(&regs->osrh, GPIO_MASK2(gpio));
+		clrbits32(&regs->tsrh, GPIO_MASK2(gpio));
+	}
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+
+	return 0;
+}
+
+static int __init ppc4xx_add_gpiochips(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "ibm,ppc4xx-gpio") {
+		int ret;
+		struct ppc4xx_gpio_chip *ppc4xx_gc;
+		struct of_mm_gpio_chip *mm_gc;
+		struct of_gpio_chip *of_gc;
+		struct gpio_chip *gc;
+
+		ppc4xx_gc = kzalloc(sizeof(*ppc4xx_gc), GFP_KERNEL);
+		if (!ppc4xx_gc) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		spin_lock_init(&ppc4xx_gc->lock);
+
+		mm_gc = &ppc4xx_gc->mm_gc;
+		of_gc = &mm_gc->of_gc;
+		gc = &of_gc->gc;
+
+		of_gc->gpio_cells = 2;
+		gc->ngpio = 32;
+		gc->direction_input = ppc4xx_gpio_dir_in;
+		gc->direction_output = ppc4xx_gpio_dir_out;
+		gc->get = ppc4xx_gpio_get;
+		gc->set = ppc4xx_gpio_set;
+
+		ret = of_mm_gpiochip_add(np, mm_gc);
+		if (ret)
+			goto err;
+		continue;
+err:
+		pr_err("%s: registration failed with status %d\n",
+		       np->full_name, ret);
+		kfree(ppc4xx_gc);
+		/* try others anyway */
+	}
+	return 0;
+}
+arch_initcall(ppc4xx_add_gpiochips);
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 7c7874e..8881a64 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -15,6 +15,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/sh_flctl.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/smc911x.h>
@@ -108,10 +109,45 @@
 	},
 };
 
+static struct mtd_partition nand_partition_info[] = {
+	{
+		.name	= "nand_data",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct resource nand_flash_resources[] = {
+	[0] = {
+		.start	= 0xa4530000,
+		.end	= 0xa45300ff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct sh_flctl_platform_data nand_flash_data = {
+	.parts		= nand_partition_info,
+	.nr_parts	= ARRAY_SIZE(nand_partition_info),
+	.flcmncr_val	= FCKSEL_E | TYPESEL_SET | NANWF_E,
+	.has_hwecc	= 1,
+};
+
+static struct platform_device nand_flash_device = {
+	.name		= "sh_flctl",
+	.resource	= nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(nand_flash_resources),
+	.dev		= {
+		.platform_data = &nand_flash_data,
+	},
+};
+
 #define FPGA_LCDREG	0xB4100180
 #define FPGA_BKLREG	0xB4100212
 #define FPGA_LCDREG_VAL	0x0018
 #define PORT_MSELCRB	0xA4050182
+#define PORT_HIZCRC	0xA405015C
+#define PORT_DRVCRA	0xA405018A
+#define PORT_DRVCRB	0xA405018C
 
 static void ap320_wvga_power_on(void *board_data)
 {
@@ -282,6 +318,7 @@
 #ifdef CONFIG_I2C
 	&camera_device,
 #endif
+	&nand_flash_device,
 };
 
 static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
@@ -364,21 +401,36 @@
 
 	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
 
+	/* FLCTL */
+	gpio_request(GPIO_FN_FCE, NULL);
+	gpio_request(GPIO_FN_NAF7, NULL);
+	gpio_request(GPIO_FN_NAF6, NULL);
+	gpio_request(GPIO_FN_NAF5, NULL);
+	gpio_request(GPIO_FN_NAF4, NULL);
+	gpio_request(GPIO_FN_NAF3, NULL);
+	gpio_request(GPIO_FN_NAF2, NULL);
+	gpio_request(GPIO_FN_NAF1, NULL);
+	gpio_request(GPIO_FN_NAF0, NULL);
+	gpio_request(GPIO_FN_FCDE, NULL);
+	gpio_request(GPIO_FN_FOE, NULL);
+	gpio_request(GPIO_FN_FSC, NULL);
+	gpio_request(GPIO_FN_FWE, NULL);
+	gpio_request(GPIO_FN_FRB, NULL);
+
+	ctrl_outw(0, PORT_HIZCRC);
+	ctrl_outw(0xFFFF, PORT_DRVCRA);
+	ctrl_outw(0xFFFF, PORT_DRVCRB);
+
 	platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
 
 	i2c_register_board_info(0, ap325rxa_i2c_devices,
 				ARRAY_SIZE(ap325rxa_i2c_devices));
- 
+
 	return platform_add_devices(ap325rxa_devices,
 				ARRAY_SIZE(ap325rxa_devices));
 }
 device_initcall(ap325rxa_devices_setup);
 
-static void __init ap325rxa_setup(char **cmdline_p)
-{
-}
-
 static struct sh_machine_vector mv_ap325rxa __initmv = {
 	.mv_name = "AP-325RXA",
-	.mv_setup = ap325rxa_setup,
 };
diff --git a/arch/sh/boards/board-rsk7203.c b/arch/sh/boards/board-rsk7203.c
index ded799c..58266f0 100644
--- a/arch/sh/boards/board-rsk7203.c
+++ b/arch/sh/boards/board-rsk7203.c
@@ -17,9 +17,10 @@
 #include <linux/mtd/map.h>
 #include <linux/smc911x.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
-#include <asm/sh7203.h>
+#include <cpu/sh7203.h>
 
 static struct smc911x_platdata smc911x_info = {
 	.flags		= SMC911X_USE_16BIT,
@@ -116,10 +117,46 @@
 	}
 }
 
+static struct gpio_led rsk7203_gpio_leds[] = {
+	{
+		.name			= "green",
+		.gpio			= GPIO_PE10,
+		.active_low		= 1,
+	}, {
+		.name			= "orange",
+		.default_trigger	= "nand-disk",
+		.gpio			= GPIO_PE12,
+		.active_low		= 1,
+	}, {
+		.name			= "red:timer",
+		.default_trigger	= "timer",
+		.gpio			= GPIO_PC14,
+		.active_low		= 1,
+	}, {
+		.name			= "red:heartbeat",
+		.default_trigger	= "heartbeat",
+		.gpio			= GPIO_PE11,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data rsk7203_gpio_leds_info = {
+	.leds		= rsk7203_gpio_leds,
+	.num_leds	= ARRAY_SIZE(rsk7203_gpio_leds),
+};
+
+static struct platform_device led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &rsk7203_gpio_leds_info,
+	},
+};
 
 static struct platform_device *rsk7203_devices[] __initdata = {
 	&smc911x_device,
 	&flash_device,
+	&led_device,
 };
 
 static int __init rsk7203_devices_setup(void)
@@ -128,11 +165,6 @@
 	gpio_request(GPIO_FN_TXD0, NULL);
 	gpio_request(GPIO_FN_RXD0, NULL);
 
-	/* Lit LED0 */
-	gpio_request(GPIO_PE10, NULL);
-	gpio_direction_output(GPIO_PE10, 0);
-	gpio_export(GPIO_PE10, 0);
-
 	set_mtd_partitions();
 	return platform_add_devices(rsk7203_devices,
 				    ARRAY_SIZE(rsk7203_devices));
diff --git a/arch/sh/boards/mach-highlander/Kconfig b/arch/sh/boards/mach-highlander/Kconfig
index fc8f28e..08057f6 100644
--- a/arch/sh/boards/mach-highlander/Kconfig
+++ b/arch/sh/boards/mach-highlander/Kconfig
@@ -18,6 +18,7 @@
 config SH_R7785RP
 	bool "R7785RP board support"
 	depends on CPU_SUBTYPE_SH7785
+	select GENERIC_GPIO
 
 endchoice
 
diff --git a/arch/sh/boards/mach-highlander/Makefile b/arch/sh/boards/mach-highlander/Makefile
index 20a1008..d93aaf8 100644
--- a/arch/sh/boards/mach-highlander/Makefile
+++ b/arch/sh/boards/mach-highlander/Makefile
@@ -1,10 +1,10 @@
 #
-# Makefile for the R7780RP-1 specific parts of the kernel
+# Makefile for the Highlander specific parts of the kernel
 #
-irqinit-$(CONFIG_SH_R7780MP)	:= irq-r7780mp.o
-irqinit-$(CONFIG_SH_R7785RP)	:= irq-r7785rp.o
-irqinit-$(CONFIG_SH_R7780RP)	:= irq-r7780rp.o
-obj-y				:= setup.o $(irqinit-y)
+obj-y				:= setup.o
+obj-$(CONFIG_SH_R7780RP)	+= irq-r7780rp.o
+obj-$(CONFIG_SH_R7780MP)	+= irq-r7780mp.o
+obj-$(CONFIG_SH_R7785RP)	+= irq-r7785rp.o pinmux-r7785rp.o
 
 ifneq ($(CONFIG_SH_R7785RP),y)
 obj-$(CONFIG_PUSH_SWITCH)	+= psw.o
diff --git a/arch/sh/boards/mach-highlander/pinmux-r7785rp.c b/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
new file mode 100644
index 0000000..c77a2be
--- /dev/null
+++ b/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <cpu/sh7785.h>
+
+void __init highlander_plat_pinmux_setup(void)
+{
+	/* SCIF0 */
+	gpio_request(GPIO_FN_SCIF0_CTS, NULL);
+	gpio_request(GPIO_FN_SCIF0_RTS, NULL);
+	gpio_request(GPIO_FN_SCIF0_SCK, NULL);
+	gpio_request(GPIO_FN_SCIF0_RXD, NULL);
+	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
+}
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index c5a40f7..806438b 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -294,6 +294,8 @@
 			 (ver >> 12) & 0xf, (ver >> 8) & 0xf,
 			 (ver >>  4) & 0xf, ver & 0xf);
 
+	highlander_plat_pinmux_setup();
+
 	/*
 	 * Enable the important clocks right away..
 	 */
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 769d630..9752819 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -288,8 +288,11 @@
 
 static void camera_power_on(void)
 {
+	/* Use 10 MHz VIO_CKO instead of 24 MHz to work
+	 * around signal quality issues on Panel Board V2.1.
+	 */
 	camera_clk = clk_get(NULL, "video_clk");
-	clk_set_rate(camera_clk, 24000000);
+	clk_set_rate(camera_clk, 10000000);
 	clk_enable(camera_clk);	/* start VIO_CKO */
 
 	/* use VIO_RST to take camera out of reset */
@@ -307,10 +310,18 @@
 	gpio_set_value(GPIO_PTT3, 0);
 }
 
+static void camera_power(int mode)
+{
+	if (mode)
+		camera_power_on();
+	else
+		camera_power_off();
+}
+
 #ifdef CONFIG_I2C
 static unsigned char camera_ov772x_magic[] =
 {
-	0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01,
+	0x09, 0x01, 0x0c, 0x20, 0x0d, 0x41, 0x0e, 0x01,
 	0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00,
 	0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07,
 	0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10,
@@ -386,6 +397,7 @@
 	},
 	.bus_param =  SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
 	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+	.power = camera_power,
 	.set_capture = ov772x_set_capture,
 };
 
@@ -400,8 +412,6 @@
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
 	| SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH,
-	.enable_camera = camera_power_on,
-	.disable_camera = camera_power_off,
 };
 
 static struct resource migor_ceu_resources[] = {
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 851c870..874dd97 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Tue Aug 26 14:21:17 2008
+# Linux kernel version: 2.6.27
+# Tue Oct 21 18:20:06 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,11 +13,12 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -72,22 +73,20 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -120,6 +119,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -190,12 +190,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -289,6 +290,8 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
 
@@ -339,6 +342,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -359,11 +363,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -455,7 +458,15 @@
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_SH_FLCTL=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -541,6 +552,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -645,6 +659,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -692,6 +707,8 @@
 # CONFIG_UIO_PDRV is not set
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -705,12 +722,13 @@
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -743,6 +761,7 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -785,6 +804,7 @@
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -855,7 +875,12 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -866,14 +891,19 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -946,13 +976,17 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/cayman_defconfig b/arch/sh/configs/cayman_defconfig
index a05b278..e21c0e8 100644
--- a/arch/sh/configs/cayman_defconfig
+++ b/arch/sh/configs/cayman_defconfig
@@ -1,22 +1,25 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Fri Nov 23 14:15:55 2007
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:04:52 2008
 #
 CONFIG_SUPERH=y
 # CONFIG_SUPERH32 is not set
 CONFIG_SUPERH64=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/cayman_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -36,17 +39,15 @@
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -60,21 +61,33 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -85,6 +98,7 @@
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -98,13 +112,18 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
 CONFIG_CPU_SH5=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -113,6 +132,7 @@
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -121,12 +141,15 @@
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 CONFIG_CPU_SUBTYPE_SH5_101=y
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -147,7 +170,9 @@
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -161,11 +186,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -196,7 +223,6 @@
 #
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=50000000
-# CONFIG_TICK_ONESHOT is not set
 
 #
 # CPU Frequency scaling
@@ -225,13 +251,12 @@
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
-CONFIG_GUSA=y
+# CONFIG_PREEMPT_RCU is not set
 
 #
 # Boot options
@@ -257,11 +282,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -274,6 +297,7 @@
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -303,8 +327,6 @@
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -312,6 +334,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -328,14 +351,14 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -371,14 +394,18 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -438,6 +465,7 @@
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -449,6 +477,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -456,18 +485,20 @@
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -486,13 +517,19 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -500,15 +537,17 @@
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
@@ -517,6 +556,9 @@
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -524,13 +566,13 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -575,10 +617,13 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -603,48 +648,62 @@
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
 
 #
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -653,16 +712,12 @@
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -671,6 +726,7 @@
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -700,6 +756,7 @@
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -709,9 +766,12 @@
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -719,6 +779,7 @@
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 
 #
 # PCI-based Watchdog Cards
@@ -735,35 +796,71 @@
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 CONFIG_VIDEO_DEV=m
-# CONFIG_VIDEO_V4L1 is not set
-# CONFIG_VIDEO_V4L1_COMPAT is not set
-CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=y
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
 # CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_MXB is not set
 # CONFIG_VIDEO_HEXIUM_ORION is not set
 # CONFIG_VIDEO_HEXIUM_GEMINI is not set
 # CONFIG_VIDEO_CX88 is not set
 # CONFIG_VIDEO_CX23885 is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_CX18 is not set
 # CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_SOC_CAMERA is not set
 # CONFIG_RADIO_ADAPTERS is not set
-CONFIG_DVB_CORE=y
-# CONFIG_DVB_CORE_ATTACH is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
 # Supported SAA7146 based PCI Adapters
 #
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_AV7110 is not set
+# CONFIG_DVB_BUDGET_CORE is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -780,6 +877,11 @@
 # CONFIG_DVB_PLUTO2 is not set
 
 #
+# Supported SDMC DM1105 Adapters
+#
+# CONFIG_DVB_DM1105 is not set
+
+#
 # Supported DVB Frontends
 #
 
@@ -791,14 +893,21 @@
 #
 # DVB-S (satellite) frontends
 #
-# CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_CX24110 is not set
 # CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0288 is not set
+# CONFIG_DVB_STB6000 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
+# CONFIG_DVB_CX24116 is not set
+# CONFIG_DVB_SI21XX is not set
 
 #
 # DVB-T (terrestrial) frontends
@@ -807,6 +916,7 @@
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -816,6 +926,7 @@
 # CONFIG_DVB_DIB3000MC is not set
 # CONFIG_DVB_DIB7000M is not set
 # CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
 
 #
 # DVB-C (cable) frontends
@@ -834,25 +945,28 @@
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
 # CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
 
 #
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
 # CONFIG_DVB_TUNER_DIB0070 is not set
 
 #
-# Miscellaneous devices
+# SEC control devices for DVB-S
 #
 # CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
 # CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
+# CONFIG_DVB_LGS8GL5 is not set
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+# CONFIG_DVB_AF9013 is not set
 CONFIG_DAB=y
 
 #
@@ -864,15 +978,16 @@
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -897,6 +1012,7 @@
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -905,7 +1021,10 @@
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -938,38 +1057,42 @@
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -981,22 +1104,20 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1020,6 +1141,7 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1039,8 +1161,11 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1048,14 +1173,13 @@
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1087,9 +1211,6 @@
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1098,6 +1219,7 @@
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1105,9 +1227,12 @@
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1123,15 +1248,20 @@
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1147,8 +1277,93 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
@@ -1156,6 +1371,7 @@
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 3dc1cbd..be4c2e0 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Mon Aug  4 16:49:13 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:18:02 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,12 +13,13 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -70,7 +71,9 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -78,15 +81,12 @@
 # CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -119,6 +119,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -192,12 +193,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -230,7 +232,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=49876504
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -318,6 +319,8 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
 
@@ -365,6 +368,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -385,11 +389,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -480,6 +483,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -504,6 +510,7 @@
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -559,6 +566,7 @@
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -626,6 +634,7 @@
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 CONFIG_SH_WDT=y
 # CONFIG_SH_WDT_MMAP is not set
 
@@ -647,6 +656,8 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -673,6 +684,7 @@
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -707,6 +719,7 @@
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -718,6 +731,7 @@
 # CONFIG_FB_CARMINE is not set
 # CONFIG_FB_SH_MOBILE_LCDC is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -755,6 +769,12 @@
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -764,6 +784,10 @@
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -775,16 +799,18 @@
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -814,6 +840,7 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -872,6 +899,11 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -882,12 +914,14 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -960,6 +994,11 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -967,7 +1006,6 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig
index bef07fa..1580068 100644
--- a/arch/sh/configs/edosk7760_defconfig
+++ b/arch/sh/configs/edosk7760_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Tue Aug 26 11:36:09 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:20:09 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -55,7 +57,6 @@
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -72,7 +73,9 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -80,10 +83,13 @@
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -100,6 +106,7 @@
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -114,6 +121,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -171,7 +179,9 @@
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -179,12 +189,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -254,9 +265,10 @@
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -283,11 +295,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -332,6 +342,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -352,11 +363,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -472,6 +482,7 @@
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -486,7 +497,6 @@
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -498,12 +508,15 @@
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
-# CONFIG_SMC9194 is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -558,6 +571,7 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -588,26 +602,41 @@
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
 CONFIG_I2C_SH7760=y
 # CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -632,8 +661,12 @@
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
@@ -659,6 +692,7 @@
 CONFIG_FB=m
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
@@ -677,9 +711,11 @@
 #
 # Frame buffer hardware drivers
 #
-# CONFIG_FB_MB86290_640X480_16BPP is not set
 # CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
+# CONFIG_FB_SH7760 is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -693,15 +729,8 @@
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -713,39 +742,18 @@
 # CONFIG_SND_VERBOSE_PROCFS is not set
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# SUPERH devices
-#
-
-#
-# System on Chip audio support
-#
+CONFIG_SND_SUPERH=y
 CONFIG_SND_SOC=y
 
 #
 # SoC Audio support for SuperH
 #
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
+# CONFIG_SND_SOC_ALL_CODECS is not set
 # CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -754,7 +762,9 @@
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -764,17 +774,18 @@
 # CONFIG_EXT2_FS_POSIX_ACL is not set
 # CONFIG_EXT2_FS_SECURITY is not set
 CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_XIP=y
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -805,6 +816,7 @@
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
@@ -826,6 +838,7 @@
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -835,12 +848,12 @@
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -911,6 +924,8 @@
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
@@ -932,13 +947,27 @@
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -956,12 +985,14 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1001,6 +1032,10 @@
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1031,15 +1066,20 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 41e25b3..1032b23 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:24:57 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:23:53 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,18 +11,19 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -67,22 +68,21 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -108,6 +108,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -175,12 +176,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -212,7 +214,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=22110000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -257,6 +258,7 @@
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -292,6 +294,8 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
@@ -304,10 +308,6 @@
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
 # CONFIG_NET is not set
 
 #
@@ -446,7 +446,6 @@
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -522,6 +521,8 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -546,6 +547,7 @@
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -568,6 +570,7 @@
 CONFIG_FB_HIT=y
 CONFIG_FB_SH_MOBILE_LCDC=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_LCD_ILI9320 is not set
@@ -630,12 +633,15 @@
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -644,6 +650,7 @@
 CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -652,10 +659,11 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -687,6 +695,7 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
@@ -774,6 +783,11 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -784,14 +798,19 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -863,13 +882,17 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index 99cc39c..b82dfb4 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:35:07 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:25:51 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,17 +11,18 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -68,22 +69,22 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -115,6 +116,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -182,12 +184,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -225,7 +228,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -261,6 +263,7 @@
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -309,11 +312,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -360,7 +361,6 @@
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
@@ -374,10 +374,12 @@
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -386,6 +388,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -408,11 +411,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -462,22 +464,20 @@
 # CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECS is not set
 # CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
@@ -640,6 +640,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -660,6 +663,7 @@
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -680,9 +684,11 @@
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
@@ -692,6 +698,7 @@
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -727,7 +734,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -838,6 +845,8 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -861,10 +870,12 @@
 CONFIG_VIDEO_V4L1=m
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_SOC_CAMERA is not set
 CONFIG_V4L_USB_DRIVERS=y
 # CONFIG_USB_VIDEO_CLASS is not set
 # CONFIG_USB_GSPCA is not set
@@ -884,14 +895,13 @@
 # CONFIG_USB_ZR364XX is not set
 # CONFIG_USB_STKWEBCAM is not set
 # CONFIG_USB_S2255 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 CONFIG_RADIO_ADAPTERS=y
 # CONFIG_RADIO_GEMTEK_PCI is not set
 # CONFIG_RADIO_MAXIRADIO is not set
 # CONFIG_RADIO_MAESTRO is not set
 CONFIG_USB_DSBR=m
 # CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
 # CONFIG_DAB is not set
 
 #
@@ -914,6 +924,7 @@
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FONT_8x16=y
 CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
 CONFIG_HID_SUPPORT=y
@@ -925,8 +936,7 @@
 # USB Input Devices
 #
 CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
 
 #
@@ -934,6 +944,34 @@
 #
 # CONFIG_USB_KBD is not set
 # CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -951,6 +989,7 @@
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -975,6 +1014,7 @@
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1004,7 +1044,6 @@
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1059,7 +1098,7 @@
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1078,6 +1117,7 @@
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1087,6 +1127,7 @@
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1098,7 +1139,7 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
@@ -1107,6 +1148,7 @@
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1143,6 +1185,7 @@
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1185,6 +1228,7 @@
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1256,6 +1300,11 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1267,12 +1316,14 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1345,6 +1396,11 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1352,7 +1408,6 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index aecdfd3..c3ecedf 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:39:41 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:29:42 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,17 +11,18 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -68,22 +69,22 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -115,6 +116,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -182,12 +184,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -225,7 +228,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=40000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -261,6 +263,7 @@
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -309,11 +312,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -360,7 +361,6 @@
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
@@ -374,10 +374,12 @@
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -386,6 +388,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -406,11 +409,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -631,6 +633,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -655,6 +660,7 @@
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -675,9 +681,11 @@
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
@@ -687,6 +695,7 @@
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -832,6 +841,8 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -872,6 +883,12 @@
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -881,6 +898,10 @@
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -911,12 +932,15 @@
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -925,6 +949,7 @@
 # CONFIG_RTC_DRV_SH is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -936,12 +961,13 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -974,6 +1000,7 @@
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1071,6 +1098,11 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1082,12 +1114,14 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1160,6 +1194,11 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1167,7 +1206,6 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index a3a80f3..499ed72 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:41:08 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:32:23 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,16 +11,17 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -55,7 +56,6 @@
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -72,22 +72,22 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -119,6 +119,7 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -186,12 +187,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -229,7 +231,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=24000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -268,6 +269,7 @@
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -291,11 +293,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -340,6 +340,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -360,11 +361,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -513,6 +513,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -560,11 +563,13 @@
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -641,6 +646,8 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -703,12 +710,15 @@
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -717,6 +727,7 @@
 CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -726,11 +737,12 @@
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -759,6 +771,7 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -806,6 +819,7 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -899,10 +913,22 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -938,6 +964,7 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
@@ -945,7 +972,6 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index e4b900e..b8ada8c 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:47:16 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:37:41 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,16 +11,17 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -69,22 +70,21 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -110,6 +110,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -183,12 +184,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -221,7 +223,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=66000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -260,6 +261,7 @@
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -287,11 +289,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -340,6 +340,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -360,11 +361,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -402,19 +402,17 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=1
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -451,6 +449,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
@@ -542,6 +543,8 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -581,6 +584,10 @@
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -591,6 +598,7 @@
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -602,12 +610,13 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -640,6 +649,7 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -678,6 +688,7 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -748,6 +759,11 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -758,14 +774,19 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -837,13 +858,17 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 4f8b197..624c47a 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Tue Aug 26 14:18:17 2008
+# Linux kernel version: 2.6.27
+# Tue Oct 21 12:57:28 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,12 +13,13 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -70,7 +71,9 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -78,15 +81,12 @@
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -118,6 +118,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -179,6 +180,7 @@
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -192,13 +194,14 @@
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -235,7 +238,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -295,6 +297,8 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
 
@@ -345,6 +349,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -365,11 +370,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
@@ -555,6 +559,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -599,6 +606,7 @@
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_KEYBOARD_SH_KEYSC=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
@@ -656,6 +664,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
@@ -709,6 +718,8 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
@@ -717,13 +728,44 @@
 #
 # Multimedia core support
 #
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
 # CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_MEDIA=y
 
 #
 # Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+CONFIG_SOC_CAMERA_PLATFORM=y
+CONFIG_VIDEO_SH_MOBILE_CEU=y
+# CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
 
 #
@@ -748,6 +790,12 @@
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -755,7 +803,6 @@
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MUSB_HDRC is not set
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
@@ -764,21 +811,23 @@
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 # CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 CONFIG_SUPERH_BUILT_IN_M66592=y
-# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
@@ -831,12 +880,15 @@
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -848,16 +900,19 @@
 # CONFIG_UIO_PDRV is not set
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -886,6 +941,7 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -938,6 +994,11 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -950,12 +1011,14 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1028,13 +1091,17 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 57a3007..2e65149 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:51:13 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 20:03:46 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,17 +11,18 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -77,7 +78,9 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -85,15 +88,13 @@
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -124,6 +125,7 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -199,12 +201,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -242,7 +245,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=28
 CONFIG_SH_PCLK_FREQ=32000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -278,6 +280,7 @@
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -309,11 +312,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -369,6 +370,7 @@
 # CONFIG_ATM is not set
 CONFIG_STP=m
 CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -390,11 +392,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
@@ -616,6 +617,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
 # CONFIG_AMD8111_ETH is not set
@@ -641,11 +645,11 @@
 CONFIG_VIA_RHINE=m
 CONFIG_VIA_RHINE_MMIO=y
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
@@ -662,9 +666,11 @@
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
@@ -674,6 +680,7 @@
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -773,24 +780,129 @@
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_HIGHLANDER=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
@@ -810,6 +922,9 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
@@ -841,12 +956,19 @@
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -856,6 +978,10 @@
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -880,18 +1006,37 @@
 # CONFIG_RTC_DRV_TEST is not set
 
 #
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
 # SPI RTC drivers
 #
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -900,6 +1045,7 @@
 CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -911,13 +1057,14 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -952,6 +1099,7 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -994,6 +1142,7 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1088,10 +1237,22 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1108,15 +1269,19 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1189,6 +1354,11 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1196,7 +1366,6 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 1d09d24..043a8a5 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 00:59:19 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 16:25:30 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,18 +11,19 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -38,11 +39,13 @@
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -67,31 +70,33 @@
 CONFIG_ELF_CORE=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
+CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
-CONFIG_OPROFILE=m
+CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -120,7 +125,8 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_CLASSIC_RCU is not set
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -182,6 +188,7 @@
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -200,13 +207,15 @@
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -243,15 +252,30 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=28
 CONFIG_SH_PCLK_FREQ=50000000
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
 #
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
 
 #
 # DMA support
@@ -276,13 +300,15 @@
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 
 #
@@ -301,7 +327,7 @@
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
@@ -310,11 +336,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
 CONFIG_NET=y
 
 #
@@ -370,6 +394,7 @@
 # CONFIG_ATM is not set
 CONFIG_STP=m
 CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -386,16 +411,16 @@
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
@@ -617,8 +642,12 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -639,9 +668,11 @@
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
@@ -651,6 +682,7 @@
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -750,24 +782,129 @@
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_HIGHLANDER=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
@@ -787,6 +924,9 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
@@ -813,6 +953,7 @@
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
@@ -846,6 +987,7 @@
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -857,6 +999,7 @@
 # CONFIG_FB_CARMINE is not set
 CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -865,12 +1008,19 @@
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
 CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -880,6 +1030,10 @@
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -904,18 +1058,37 @@
 # CONFIG_RTC_DRV_TEST is not set
 
 #
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
 # SPI RTC drivers
 #
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -924,6 +1097,7 @@
 CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -935,13 +1109,14 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -976,6 +1151,7 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1018,6 +1194,7 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1094,6 +1271,8 @@
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_LOCK_ALLOC=y
@@ -1113,10 +1292,23 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1133,15 +1325,19 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1214,6 +1410,11 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1221,7 +1422,6 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1229,6 +1429,8 @@
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index 840fe38..85b0ac4 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Mon Jul 28 22:23:03 2008
+# Linux kernel version: 2.6.27
+# Tue Oct 21 12:58:47 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -56,7 +58,6 @@
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -72,7 +73,9 @@
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
@@ -80,14 +83,12 @@
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -117,6 +118,7 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -183,10 +185,10 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 
@@ -219,7 +221,6 @@
 CONFIG_SH_TIMER_IRQ=142
 CONFIG_SH_PCLK_FREQ=16670800
 CONFIG_SH_CLK_MD=0
-# CONFIG_TICK_ONESHOT is not set
 
 #
 # CPU Frequency scaling
@@ -266,6 +267,7 @@
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -292,11 +294,8 @@
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -339,6 +338,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -359,11 +359,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -442,7 +441,6 @@
 CONFIG_MTD_PHYSMAP_START=0x0
 CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -509,6 +507,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -541,7 +542,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -615,6 +616,8 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -655,9 +658,36 @@
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -675,6 +705,7 @@
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -691,6 +722,7 @@
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -705,7 +737,6 @@
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -718,7 +749,7 @@
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -735,6 +766,7 @@
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -762,12 +794,15 @@
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -776,16 +811,18 @@
 CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -847,6 +884,7 @@
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -905,10 +943,21 @@
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_SG=y
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -924,6 +973,7 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
@@ -931,7 +981,6 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index 8413236..7d2a9e8 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:55:52 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:44:36 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,17 +11,18 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -69,7 +70,9 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -77,15 +80,13 @@
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -116,6 +117,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -183,12 +185,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -232,7 +235,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=60000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -268,6 +270,7 @@
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -302,11 +305,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -353,6 +354,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -373,11 +375,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
@@ -598,6 +599,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -622,6 +626,7 @@
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -642,9 +647,11 @@
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
@@ -654,6 +661,7 @@
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -688,7 +696,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -776,11 +784,13 @@
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
@@ -808,6 +818,8 @@
 # CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -835,6 +847,7 @@
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -868,6 +881,7 @@
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -880,6 +894,7 @@
 CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -905,6 +920,7 @@
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1005,9 +1021,36 @@
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1025,6 +1068,7 @@
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -1047,6 +1091,7 @@
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1076,7 +1121,6 @@
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1089,7 +1133,7 @@
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1105,6 +1149,7 @@
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1134,16 +1179,20 @@
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1152,6 +1201,7 @@
 # CONFIG_RTC_DRV_SH is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1160,10 +1210,11 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1196,6 +1247,7 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1293,6 +1345,11 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1305,12 +1362,14 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1383,6 +1442,11 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1390,7 +1454,6 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index 7d9fa6e..f680d3e 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:59:18 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:47:39 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,17 +11,18 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -69,7 +70,9 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -77,15 +80,13 @@
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -116,6 +117,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -183,12 +185,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -232,7 +235,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=60000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -268,6 +270,7 @@
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -302,11 +305,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -353,6 +354,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -373,11 +375,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
@@ -598,6 +599,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -622,6 +626,7 @@
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -642,9 +647,11 @@
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
@@ -654,6 +661,7 @@
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -688,7 +696,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -776,11 +784,13 @@
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
@@ -808,6 +818,8 @@
 # CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -835,6 +847,7 @@
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -868,6 +881,7 @@
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -880,6 +894,7 @@
 CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -905,6 +920,7 @@
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1005,9 +1021,36 @@
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1025,6 +1068,7 @@
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -1047,6 +1091,7 @@
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1076,7 +1121,6 @@
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1089,7 +1133,7 @@
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1105,6 +1149,7 @@
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1134,16 +1179,20 @@
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1152,6 +1201,7 @@
 # CONFIG_RTC_DRV_SH is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1160,10 +1210,11 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1196,6 +1247,7 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1293,6 +1345,11 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1305,12 +1362,14 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1383,6 +1442,11 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1390,7 +1454,6 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/rts7751r2dplus_qemu_defconfig b/arch/sh/configs/rts7751r2dplus_qemu_defconfig
index a72796c..ae8f630 100644
--- a/arch/sh/configs/rts7751r2dplus_qemu_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_qemu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc2
-# Mon Aug 18 22:17:44 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:51:20 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,12 +13,13 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -73,7 +74,9 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -81,15 +84,12 @@
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -121,6 +121,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -188,12 +189,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -237,7 +239,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=60000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -299,6 +300,8 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_NET is not set
 
@@ -467,10 +470,12 @@
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -495,6 +500,8 @@
 # CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -519,6 +526,7 @@
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -541,6 +549,7 @@
 CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -566,6 +575,7 @@
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
@@ -588,6 +598,12 @@
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -616,16 +632,20 @@
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -634,6 +654,7 @@
 # CONFIG_RTC_DRV_SH is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -642,10 +663,11 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -677,6 +699,7 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -790,10 +813,21 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -811,12 +845,14 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -889,13 +925,17 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index 6d834f2..543287b 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 02:00:12 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:53:22 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,17 +11,18 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -56,7 +57,6 @@
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -73,7 +73,9 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -81,15 +83,13 @@
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -121,6 +121,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -196,12 +197,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -273,9 +275,10 @@
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -328,11 +331,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -406,6 +407,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -424,6 +426,7 @@
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -456,11 +459,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -510,21 +512,19 @@
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECS is not set
 # CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
@@ -748,9 +748,13 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_NET_POCKET is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -790,7 +794,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -825,6 +829,7 @@
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -923,6 +928,8 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -949,6 +956,7 @@
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
@@ -982,6 +990,7 @@
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -993,6 +1002,7 @@
 # CONFIG_FB_CARMINE is not set
 CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1022,6 +1032,7 @@
 CONFIG_LOGO_SUPERH_VGA16=y
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=y
 CONFIG_HID_SUPPORT=y
@@ -1033,9 +1044,36 @@
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1053,6 +1091,7 @@
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1074,6 +1113,7 @@
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1103,7 +1143,6 @@
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1117,7 +1156,7 @@
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1135,6 +1174,7 @@
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1155,6 +1195,7 @@
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1168,12 +1209,13 @@
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1211,6 +1253,7 @@
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
@@ -1252,6 +1295,7 @@
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1349,10 +1393,23 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1369,12 +1426,14 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1448,6 +1507,11 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1455,7 +1519,6 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index af15cbe..25717ff 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 02:06:07 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 18:57:39 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,16 +11,17 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -45,6 +46,7 @@
 CONFIG_CGROUPS=y
 CONFIG_CGROUP_DEBUG=y
 CONFIG_CGROUP_NS=y
+# CONFIG_CGROUP_FREEZER is not set
 CONFIG_CGROUP_DEVICE=y
 # CONFIG_GROUP_SCHED is not set
 CONFIG_CGROUP_CPUACCT=y
@@ -80,7 +82,9 @@
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
@@ -88,14 +92,12 @@
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -126,6 +128,7 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 # CONFIG_CLASSIC_RCU is not set
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -192,10 +195,10 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 
@@ -228,7 +231,6 @@
 CONFIG_SH_TIMER_IRQ=140
 CONFIG_SH_PCLK_FREQ=33333333
 CONFIG_SH_CLK_MD=6
-# CONFIG_TICK_ONESHOT is not set
 
 #
 # CPU Frequency scaling
@@ -275,6 +277,7 @@
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -307,11 +310,8 @@
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -361,6 +361,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -381,11 +382,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -461,7 +461,6 @@
 CONFIG_MTD_PHYSMAP_START=0x20000000
 CONFIG_MTD_PHYSMAP_LEN=0x01000000
 CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -531,6 +530,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -609,6 +611,8 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -666,12 +670,15 @@
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -680,6 +687,7 @@
 CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -687,10 +695,11 @@
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -755,6 +764,7 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -811,10 +821,19 @@
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -828,12 +847,14 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -907,13 +928,17 @@
 #
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 4e30b70..075f42e 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 02:08:38 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:00:21 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,16 +11,17 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,22 +72,22 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -117,6 +118,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -186,12 +188,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -225,7 +228,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=27000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -261,6 +263,7 @@
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -284,11 +287,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -334,6 +335,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -354,11 +356,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -529,6 +530,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
@@ -632,6 +636,8 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -655,11 +661,11 @@
 CONFIG_VIDEO_V4L1=y
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_SOC_CAMERA is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 CONFIG_RADIO_ADAPTERS=y
 # CONFIG_DAB is not set
 
@@ -671,6 +677,7 @@
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
@@ -692,6 +699,7 @@
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -706,6 +714,7 @@
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 # CONFIG_LOGO is not set
 CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -734,6 +743,12 @@
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -742,6 +757,7 @@
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -753,12 +769,13 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -787,6 +804,7 @@
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -837,6 +855,7 @@
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -868,6 +887,11 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -880,12 +904,14 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -958,13 +984,17 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index 80c1c72..db9cacd 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 02:12:32 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:03:29 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,16 +11,17 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -58,21 +59,20 @@
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
+CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
@@ -96,6 +96,7 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -161,10 +162,10 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 
@@ -196,7 +197,6 @@
 CONFIG_SH_TIMER_IRQ=86
 CONFIG_SH_PCLK_FREQ=31250000
 CONFIG_SH_CLK_MD=5
-# CONFIG_TICK_ONESHOT is not set
 
 #
 # CPU Frequency scaling
@@ -228,6 +228,7 @@
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -253,11 +254,8 @@
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 # CONFIG_NET is not set
 
 #
@@ -328,7 +326,6 @@
 CONFIG_MTD_PHYSMAP_LEN=0x01000000
 CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_SOLUTIONENGINE is not set
-# CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -455,6 +452,8 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -488,6 +487,12 @@
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -497,6 +502,10 @@
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -507,16 +516,18 @@
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
@@ -589,6 +600,11 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -597,6 +613,7 @@
 # Security options
 #
 # CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
@@ -604,7 +621,6 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index 490dcbc..d88190f 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -1,34 +1,36 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc5
-# Thu Apr 26 09:16:31 2007
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:04:52 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
@@ -36,11 +38,13 @@
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -53,32 +57,45 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -92,59 +109,18 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-CONFIG_SH_SOLUTION_ENGINE=y
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7780_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7722_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_LBOX_RE2 is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH3=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 CONFIG_CPU_SUBTYPE_SH7705=y
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -152,10 +128,8 @@
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -164,63 +138,62 @@
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 CONFIG_SH7705_CACHE_32KB=y
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-# CONFIG_CF_AREA4 is not set
-CONFIG_CF_BASE_ADDR=0xb8000000
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -228,18 +201,27 @@
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 # CONFIG_SH_FPU_EMU is not set
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_ADC is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 
 #
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_SOLUTION_ENGINE=y
+# CONFIG_SH_EDOSK7705 is not set
+
+#
 # Timer and clock configuration
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -254,7 +236,6 @@
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -270,55 +251,45 @@
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -326,6 +297,7 @@
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -347,6 +319,7 @@
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -354,27 +327,14 @@
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -384,10 +344,6 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -395,9 +351,19 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -409,21 +375,14 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -436,6 +395,7 @@
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -461,7 +421,6 @@
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -484,47 +443,29 @@
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -532,73 +473,41 @@
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_AX88796 is not set
 CONFIG_STNIC=y
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=y
 # CONFIG_PPP_MULTILINK is not set
@@ -609,21 +518,13 @@
 # CONFIG_PPP_BSDCOMP is not set
 # CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -631,13 +532,13 @@
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -647,6 +548,7 @@
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -664,6 +566,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -681,153 +584,110 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
-# CONFIG_VIDEO_DEV is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia core support
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
 
 #
-# USB support
+# Special HID drivers
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_HID_COMPAT=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -836,18 +696,16 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -871,11 +729,11 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 
 #
 # Miscellaneous filesystems
@@ -890,31 +748,33 @@
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -922,40 +782,34 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
-# Distributed Lock Manager
-#
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -964,11 +818,92 @@
 # Security options
 #
 # CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
@@ -976,10 +911,14 @@
 CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index 7be79cd..869ab17 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,24 +1,26 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Wed Jun 18 16:36:08 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:08:12 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -51,7 +53,6 @@
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -68,17 +69,22 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
@@ -88,12 +94,13 @@
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -108,6 +115,7 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -167,6 +175,7 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -174,12 +183,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -207,7 +217,6 @@
 #
 CONFIG_SOLUTION_ENGINE=y
 CONFIG_SH_SOLUTION_ENGINE=y
-# CONFIG_SH_AP325RXA is not set
 
 #
 # Timer and clock configuration
@@ -215,7 +224,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=66666666
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -251,6 +259,7 @@
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -279,11 +288,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -297,6 +304,7 @@
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -341,6 +349,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -359,7 +368,7 @@
 CONFIG_NET_SCH_HTB=y
 CONFIG_NET_SCH_HFSC=y
 CONFIG_NET_SCH_PRIO=y
-# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=y
 CONFIG_NET_SCH_SFQ=y
 CONFIG_NET_SCH_TEQL=y
@@ -395,12 +404,11 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -418,6 +426,8 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -504,6 +514,7 @@
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -550,6 +561,7 @@
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -558,7 +570,6 @@
 CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -593,9 +604,11 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -657,6 +670,7 @@
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -668,8 +682,11 @@
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -699,10 +716,6 @@
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -713,6 +726,10 @@
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -734,7 +751,9 @@
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -748,12 +767,13 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -782,6 +802,7 @@
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -813,6 +834,7 @@
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -822,12 +844,12 @@
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -877,13 +899,26 @@
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -899,16 +934,19 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -947,6 +985,10 @@
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -977,15 +1019,20 @@
 #
 CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
index f3d4ca0..b52be140 100644
--- a/arch/sh/configs/se7721_defconfig
+++ b/arch/sh/configs/se7721_defconfig
@@ -1,24 +1,26 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc5
-# Fri Mar 21 12:05:31 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:12:06 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,30 +73,38 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -109,6 +119,7 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -136,6 +147,7 @@
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -165,7 +177,9 @@
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -173,11 +187,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -211,7 +227,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -247,6 +262,7 @@
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -275,11 +291,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -293,6 +307,7 @@
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -330,8 +345,6 @@
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -339,6 +352,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -357,7 +371,7 @@
 CONFIG_NET_SCH_HTB=y
 CONFIG_NET_SCH_HFSC=y
 CONFIG_NET_SCH_PRIO=y
-# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=y
 CONFIG_NET_SCH_SFQ=y
 CONFIG_NET_SCH_TEQL=y
@@ -393,12 +407,11 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -416,6 +429,8 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -426,6 +441,7 @@
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -502,6 +518,7 @@
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -546,13 +563,15 @@
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
 CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -561,7 +580,6 @@
 # CONFIG_VETH is not set
 # CONFIG_NET_ETHERNET is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -569,6 +587,7 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -591,7 +610,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -620,6 +639,7 @@
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -636,6 +656,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -659,12 +680,7 @@
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -680,13 +696,26 @@
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -701,10 +730,6 @@
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -715,9 +740,36 @@
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -733,11 +785,16 @@
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -750,6 +807,8 @@
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -771,6 +830,7 @@
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -778,7 +838,6 @@
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -791,7 +850,7 @@
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -806,6 +865,8 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -822,12 +883,12 @@
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -841,14 +902,14 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
@@ -879,6 +940,7 @@
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -910,6 +972,7 @@
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -971,6 +1034,7 @@
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -981,6 +1045,7 @@
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -994,13 +1059,27 @@
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1016,55 +1095,96 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
@@ -1073,6 +1193,7 @@
 CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
index 8e6a6baf..e6df51f 100644
--- a/arch/sh/configs/se7722_defconfig
+++ b/arch/sh/configs/se7722_defconfig
@@ -1,53 +1,56 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Wed Jun 20 18:08:04 2007
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:15:10 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -61,6 +64,7 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -69,32 +73,41 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -108,6 +121,8 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -117,8 +132,10 @@
 CONFIG_CPU_SH4AL_DSP=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -126,6 +143,8 @@
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -134,14 +153,17 @@
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 CONFIG_CPU_SUBTYPE_SH7722=y
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -151,6 +173,7 @@
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 # CONFIG_X2TLB is not set
 CONFIG_VSYSCALL=y
 CONFIG_NUMA=y
@@ -161,14 +184,18 @@
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -181,34 +208,38 @@
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_SH_FPU is not set
 # CONFIG_SH_FPU_EMU is not set
 CONFIG_SH_DSP=y
 CONFIG_SH_STORE_QUEUES=y
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_DSP=y
 
 #
 # Board support
 #
 CONFIG_SOLUTION_ENGINE=y
 CONFIG_SH_7722_SOLUTION_ENGINE=y
+# CONFIG_SH_MIGOR is not set
 
 #
 # Timer and clock configuration
@@ -219,6 +250,7 @@
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -248,19 +280,21 @@
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -271,21 +305,15 @@
 CONFIG_CF_AREA6=y
 CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -298,6 +326,7 @@
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -316,6 +345,7 @@
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -323,8 +353,6 @@
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -332,6 +360,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -341,10 +370,6 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -352,18 +377,19 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -372,44 +398,29 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -417,6 +428,7 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -446,40 +458,41 @@
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 CONFIG_PATA_PLATFORM=y
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 
@@ -488,22 +501,14 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -511,6 +516,7 @@
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -520,7 +526,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -534,6 +539,7 @@
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -554,6 +560,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -572,119 +579,106 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
 
 #
-# USB support
+# Special HID drivers
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_HID_COMPAT=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -701,38 +695,30 @@
 # CONFIG_RTC_DRV_TEST is not set
 
 #
-# I2C RTC drivers
-#
-
-#
 # SPI RTC drivers
 #
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -744,22 +730,20 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -783,12 +767,12 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -803,14 +787,14 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -818,42 +802,39 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
@@ -864,11 +845,92 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
@@ -876,8 +938,10 @@
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
index 167786f..a577099 100644
--- a/arch/sh/configs/se7750_defconfig
+++ b/arch/sh/configs/se7750_defconfig
@@ -1,48 +1,55 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc2
-# Thu Dec 28 23:15:49 2006
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:17:29 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -54,33 +61,47 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -94,68 +115,27 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-CONFIG_SH_SOLUTION_ENGINE=y
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 CONFIG_CPU_SUBTYPE_SH7750=y
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -164,58 +144,61 @@
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -223,19 +206,28 @@
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
+CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_SOLUTION_ENGINE=y
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -250,12 +242,11 @@
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
-CONFIG_HEARTBEAT=y
 
 #
 # Additional SuperH Device Drivers
 #
+CONFIG_HEARTBEAT=y
 # CONFIG_PUSH_SWITCH is not set
 
 #
@@ -266,11 +257,15 @@
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -283,43 +278,32 @@
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -342,6 +326,7 @@
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -349,27 +334,14 @@
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -379,10 +351,6 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -390,9 +358,19 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -404,32 +382,27 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -455,7 +428,6 @@
 # CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -478,75 +450,53 @@
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -568,6 +518,7 @@
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -575,96 +526,52 @@
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_AX88796 is not set
 CONFIG_STNIC=y
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -682,6 +589,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -704,15 +612,30 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -722,148 +645,92 @@
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SH_WDT=y
 # CONFIG_SH_WDT_MMAP is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
 
 #
-# TPM devices
+# Sonics Silicon Backplane
 #
-# CONFIG_TCG_TPM is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# I2C support
+# Multifunction device drivers
 #
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
-# CONFIG_VIDEO_DEV is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia core support
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Virtualization
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -887,12 +754,12 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -908,31 +775,33 @@
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -940,7 +809,6 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -958,49 +826,126 @@
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
@@ -1008,9 +953,14 @@
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
index a909559..d99a6bd 100644
--- a/arch/sh/configs/se7751_defconfig
+++ b/arch/sh/configs/se7751_defconfig
@@ -1,40 +1,54 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 12:10:12 2006
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:21:12 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -47,33 +61,47 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -87,60 +115,27 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-CONFIG_SH_7751_SOLUTION_ENGINE=y
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -149,65 +144,91 @@
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7751_SOLUTION_ENGINE=y
+# CONFIG_SH_SH03 is not set
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=60000000
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -222,21 +243,30 @@
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -250,43 +280,29 @@
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_CF_ENABLER is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -308,52 +324,42 @@
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 CONFIG_NETFILTER_DEBUG=y
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
-# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=y
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -363,10 +369,6 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -374,9 +376,19 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -388,32 +400,27 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 # CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -439,7 +446,6 @@
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -462,43 +468,29 @@
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -506,89 +498,48 @@
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -606,6 +557,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -620,15 +572,30 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -637,133 +604,75 @@
 #
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_SH_WDT is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
+# Sonics Silicon Backplane
 #
-# CONFIG_RAW_DRIVER is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# TPM devices
+# Multifunction device drivers
 #
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia core support
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -772,17 +681,17 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -806,12 +715,12 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -824,26 +733,27 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -851,57 +761,146 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
index 30f5ee4..ad95b80 100644
--- a/arch/sh/configs/se7780_defconfig
+++ b/arch/sh/configs/se7780_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc3
-# Thu Feb 28 10:18:04 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:27:30 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -41,11 +43,8 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -68,20 +67,27 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
@@ -90,6 +96,7 @@
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -104,7 +111,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -115,6 +122,7 @@
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -132,6 +140,7 @@
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -152,7 +161,6 @@
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_29BIT=y
-# CONFIG_PMB is not set
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -161,9 +169,12 @@
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -171,11 +182,14 @@
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -210,7 +224,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=28
 CONFIG_SH_PCLK_FREQ=33333333
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -244,10 +257,10 @@
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 
 #
@@ -273,11 +286,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -347,11 +358,10 @@
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -374,6 +384,7 @@
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -461,11 +472,13 @@
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -537,9 +550,13 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_NV is not set
@@ -547,11 +564,11 @@
 # CONFIG_SATA_QSTOR is not set
 # CONFIG_SATA_PROMISE is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
@@ -575,6 +592,7 @@
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -583,12 +601,11 @@
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -621,12 +638,16 @@
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -645,6 +666,7 @@
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -654,6 +676,7 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -675,7 +698,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -709,9 +732,11 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -737,12 +762,7 @@
 # CONFIG_RAW_DRIVER is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -757,6 +777,7 @@
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -768,13 +789,26 @@
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -786,15 +820,16 @@
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -818,6 +853,7 @@
 # CONFIG_FB_ATY is not set
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -825,7 +861,10 @@
 # CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -850,24 +889,10 @@
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -877,8 +902,36 @@
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -892,11 +945,17 @@
 #
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -911,6 +970,8 @@
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -921,17 +982,25 @@
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Imaging devices
 #
+# CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -943,6 +1012,10 @@
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
@@ -956,17 +1029,19 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -975,9 +1050,11 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -1010,6 +1087,7 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1025,6 +1103,7 @@
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1034,9 +1113,8 @@
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -1099,12 +1177,20 @@
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1115,45 +1201,86 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_PCBC is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1163,6 +1290,7 @@
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index 9fd5ea7..95f0f5d 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -1,41 +1,56 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 12:13:26 2006
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:31:54 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -48,34 +63,49 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -89,59 +119,27 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-CONFIG_SH_SH03=y
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -150,69 +148,90 @@
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-CONFIG_CF_ENABLER=y
-CONFIG_CF_AREA5=y
-# CONFIG_CF_AREA6 is not set
-CONFIG_CF_BASE_ADDR=0xb4000000
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+CONFIG_SH_SH03=y
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=60000000
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -227,22 +246,31 @@
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -256,20 +284,17 @@
 #
 # Bus options
 #
+CONFIG_CF_ENABLER=y
+CONFIG_CF_AREA5=y
+# CONFIG_CF_AREA6 is not set
+CONFIG_CF_BASE_ADDR=0xb4000000
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
 CONFIG_HOTPLUG_PCI=m
 # CONFIG_HOTPLUG_PCI_FAKE is not set
 # CONFIG_HOTPLUG_PCI_CPCI is not set
@@ -279,30 +304,24 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -323,33 +342,23 @@
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -359,10 +368,6 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -370,9 +375,19 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -381,34 +396,15 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -420,45 +416,76 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
@@ -479,6 +506,8 @@
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -486,12 +515,9 @@
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
@@ -501,7 +527,6 @@
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -512,88 +537,67 @@
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -601,18 +605,21 @@
 # CONFIG_NE2K_PCI is not set
 CONFIG_8139CP=y
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -620,52 +627,46 @@
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -673,6 +674,7 @@
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -682,7 +684,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -692,6 +693,7 @@
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -705,10 +707,13 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -731,15 +736,36 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -747,6 +773,7 @@
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 CONFIG_SH_WDT=m
 # CONFIG_SH_WDT_MMAP is not set
 
@@ -755,142 +782,92 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
 
 #
-# Ftape, the floppy tape device driver
+# Sonics Silicon Backplane
 #
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# TPM devices
+# Multifunction device drivers
 #
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia core support
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
 
 #
-# USB support
+# Special HID drivers
 #
+CONFIG_HID_COMPAT=y
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -904,20 +881,19 @@
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -928,7 +904,6 @@
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -948,12 +923,12 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -968,31 +943,30 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1000,7 +974,6 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1022,10 +995,7 @@
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -1066,81 +1036,146 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
 
 #
-# Hardware crypto devices
+# Authenticated Encryption with Associated Data
 #
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
index 37e49a5..9a768b2 100644
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ b/arch/sh/configs/sh7710voipgw_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc4
-# Thu Mar  6 16:02:29 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:35:18 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -70,30 +72,38 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -108,7 +118,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -118,6 +128,7 @@
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -135,6 +146,7 @@
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -164,7 +176,9 @@
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -172,11 +186,13 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -209,7 +225,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=32768000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -245,10 +260,10 @@
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -269,11 +284,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -311,10 +324,7 @@
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -327,10 +337,12 @@
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -339,6 +351,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -357,7 +370,7 @@
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_MULTIQ is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -395,11 +408,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -417,6 +429,8 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -425,6 +439,7 @@
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -500,6 +515,7 @@
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -516,7 +532,6 @@
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -528,14 +543,18 @@
 # CONFIG_MII is not set
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
+# CONFIG_SH_ETH is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -543,6 +562,7 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -587,6 +607,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -611,12 +632,7 @@
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -632,13 +648,26 @@
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -653,20 +682,28 @@
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -675,24 +712,23 @@
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
@@ -720,6 +756,7 @@
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -751,6 +788,7 @@
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -780,12 +818,19 @@
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -796,51 +841,91 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
@@ -849,6 +934,7 @@
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index baf830c..6a77f69 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc2
-# Fri Aug  8 13:44:20 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:37:12 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,11 +13,12 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -76,7 +77,9 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -84,15 +87,12 @@
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -124,6 +124,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -181,6 +182,7 @@
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -193,13 +195,15 @@
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -231,7 +235,6 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=28
 CONFIG_SH_PCLK_FREQ=66666666
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -291,6 +294,8 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
 
@@ -341,6 +346,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -361,11 +367,10 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
@@ -563,6 +568,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -675,6 +683,8 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
@@ -700,6 +710,7 @@
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -725,6 +736,7 @@
 # CONFIG_FB_SH_MOBILE_LCDC is not set
 CONFIG_FB_SH7760=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -768,6 +780,7 @@
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -788,6 +801,7 @@
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -817,7 +831,6 @@
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -830,7 +843,7 @@
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -846,13 +859,14 @@
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
@@ -860,7 +874,7 @@
 # CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MEMSTICK is not set
@@ -869,6 +883,7 @@
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -880,12 +895,13 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -919,6 +935,7 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
@@ -955,6 +972,7 @@
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1025,6 +1043,11 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1035,12 +1058,14 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1113,13 +1138,17 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
index ff72697..07e33c2 100644
--- a/arch/sh/configs/sh7785lcr_defconfig
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -1,27 +1,29 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Tue Jul 15 21:37:59 2008
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:49:23 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -61,7 +63,6 @@
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -78,7 +79,9 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -86,10 +89,13 @@
 # CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -106,6 +112,7 @@
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -120,6 +127,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
@@ -181,10 +189,12 @@
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -192,13 +202,15 @@
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
@@ -266,9 +278,10 @@
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -299,11 +312,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -358,6 +369,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -378,12 +390,12 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -499,6 +511,7 @@
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -541,6 +554,7 @@
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -615,7 +629,6 @@
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -624,19 +637,18 @@
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_NET_ETHERNET is not set
+CONFIG_MII=y
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
@@ -645,6 +657,8 @@
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -679,7 +693,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -720,6 +734,7 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -754,44 +769,65 @@
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOPCA=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-CONFIG_I2C_PCA_PLATFORM=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -816,8 +852,12 @@
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
@@ -844,6 +884,7 @@
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -877,6 +918,7 @@
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -885,8 +927,11 @@
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -911,10 +956,6 @@
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 # CONFIG_LOGO_SUPERH_CLUT224 is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -925,9 +966,36 @@
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -945,6 +1013,7 @@
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -969,6 +1038,7 @@
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -998,7 +1068,6 @@
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1011,7 +1080,7 @@
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1029,6 +1098,7 @@
 # CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1073,19 +1143,24 @@
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1097,12 +1172,13 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1137,6 +1213,7 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1158,6 +1235,7 @@
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1168,18 +1246,18 @@
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1250,6 +1328,8 @@
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1270,13 +1350,27 @@
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1292,15 +1386,19 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1339,6 +1437,10 @@
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1369,15 +1471,20 @@
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
index 8800fef..e2b38a3 100644
--- a/arch/sh/configs/shmin_defconfig
+++ b/arch/sh/configs/shmin_defconfig
@@ -1,27 +1,34 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 12:52:49 2006
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:52:59 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
@@ -29,11 +36,14 @@
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -44,27 +54,38 @@
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 # CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-# CONFIG_SLAB is not set
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
-CONFIG_SLOB=y
-
-#
-# Loadable module support
-#
 # CONFIG_MODULES is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -78,59 +99,27 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-CONFIG_SH_SHMIN=y
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH3=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 CONFIG_CPU_SUBTYPE_SH7706=y
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -139,65 +128,87 @@
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x00800000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 # CONFIG_SH_FPU_EMU is not set
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_ADC is not set
 CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 
 #
-# Timer support
+# Board support
+#
+CONFIG_SH_SHMIN=y
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=32000000
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -212,69 +223,63 @@
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00210000
-# CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -295,33 +300,23 @@
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -331,10 +326,6 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -342,9 +333,19 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -356,32 +357,27 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 # CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -407,7 +403,6 @@
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -433,41 +428,27 @@
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -475,89 +456,48 @@
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -575,6 +515,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -593,153 +534,103 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia core support
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -763,12 +654,12 @@
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_SYSFS is not set
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 
 #
 # Miscellaneous filesystems
@@ -780,29 +671,28 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -810,53 +700,140 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
index a794c08..ae5cbe2 100644
--- a/arch/sh/configs/shx3_defconfig
+++ b/arch/sh/configs/shx3_defconfig
@@ -1,18 +1,23 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc7
-# Fri Sep 21 19:07:30 2007
+# Linux kernel version: 2.6.27
+# Tue Oct 21 12:16:25 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -26,7 +31,6 @@
 # General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
@@ -34,20 +38,41 @@
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+# CONFIG_CPUSETS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MM_OWNER=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
@@ -59,44 +84,66 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -105,7 +152,10 @@
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -114,6 +164,7 @@
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -122,14 +173,17 @@
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 CONFIG_CPU_SUBTYPE_SHX3=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -139,45 +193,56 @@
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
 CONFIG_VSYSCALL=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=3
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=6
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_4KB is not set
 # CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_64KB=y
+CONFIG_ENTRY_OFFSET=0x00010000
+# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+CONFIG_HUGETLB_PAGE_SIZE_1MB=y
 # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_CACHE_WRITEBACK is not set
+CONFIG_CACHE_WRITEBACK=y
 # CONFIG_CACHE_WRITETHROUGH is not set
-CONFIG_CACHE_OFF=y
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -202,8 +267,9 @@
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=50000000
 CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
+CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -214,7 +280,10 @@
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
@@ -245,20 +314,23 @@
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
-# CONFIG_SMP is not set
+CONFIG_SECCOMP=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
 
@@ -266,21 +338,15 @@
 # Bus options
 #
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -292,6 +358,7 @@
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -313,6 +380,7 @@
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -334,8 +402,10 @@
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -343,6 +413,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -352,28 +423,28 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+# CONFIG_CAN_DEBUG_DEVICES is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -384,6 +455,7 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -397,14 +469,18 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -443,25 +519,41 @@
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -470,10 +562,19 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -495,6 +596,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -514,6 +616,76 @@
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_SH_SCI is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -522,78 +694,158 @@
 #
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_SH_WDT is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 
 #
-# SPI support
+# USB-based Watchdog Cards
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
-# USB Gadget Support
+# may also be needed; see USB_STORAGE Help for more information
 #
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
-# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_M66592=y
+CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
@@ -602,27 +854,78 @@
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# I2C RTC drivers
 #
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
-# DMA Devices
+# SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
-# Userspace I/O
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 CONFIG_UIO=m
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -634,22 +937,20 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -673,12 +974,12 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -693,14 +994,14 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -714,29 +1015,17 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -744,9 +1033,12 @@
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -761,18 +1053,36 @@
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
 # CONFIG_DEBUG_BOOTMEM is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_SH_KGDB is not set
 
 #
@@ -780,7 +1090,92 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
@@ -788,10 +1183,12 @@
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig
index e4e5d21..b4ca511 100644
--- a/arch/sh/configs/snapgear_defconfig
+++ b/arch/sh/configs/snapgear_defconfig
@@ -1,36 +1,36 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Thu Jul 26 11:49:11 2007
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:55:03 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
@@ -38,12 +38,15 @@
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -57,6 +60,7 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -65,10 +69,22 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -78,6 +94,7 @@
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -91,13 +108,18 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -105,6 +127,8 @@
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -113,14 +137,17 @@
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -130,6 +157,7 @@
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -139,7 +167,9 @@
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -147,16 +177,21 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -164,20 +199,18 @@
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
 # Board support
 #
 # CONFIG_SH_7751_SYSTEMH is not set
 CONFIG_SH_SECUREEDGE5410=y
-# CONFIG_SH_HS7751RVOIP is not set
 # CONFIG_SH_RTS7751R2D is not set
 # CONFIG_SH_LANDISK is not set
 # CONFIG_SH_TITAN is not set
@@ -189,9 +222,9 @@
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=60000000
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -224,11 +257,15 @@
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -241,26 +278,20 @@
 #
 # Bus options
 #
-CONFIG_SH_CONCAT_FS=y
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -286,14 +317,13 @@
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -301,6 +331,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -310,10 +341,6 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -321,14 +348,14 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -352,6 +379,7 @@
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -365,6 +393,7 @@
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -401,6 +430,7 @@
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
 CONFIG_MTD_PLATRAM=y
 
 #
@@ -437,10 +467,12 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -452,44 +484,52 @@
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -501,12 +541,14 @@
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -516,12 +558,12 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -540,7 +582,6 @@
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -564,7 +605,9 @@
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -584,82 +627,77 @@
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -668,18 +706,16 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -703,12 +739,12 @@
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -724,14 +760,14 @@
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -745,34 +781,30 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -782,6 +814,8 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -790,6 +824,7 @@
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig
index af921b5a..1711f0f 100644
--- a/arch/sh/configs/systemh_defconfig
+++ b/arch/sh/configs/systemh_defconfig
@@ -1,36 +1,50 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 12:57:29 2006
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:56:48 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -43,34 +57,48 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -84,59 +112,27 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-CONFIG_SH_7751_SYSTEMH=y
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -145,65 +141,93 @@
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x00400000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+CONFIG_SH_7751_SYSTEMH=y
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_LBOX_RE2 is not set
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=60000000
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -218,21 +242,31 @@
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -245,31 +279,15 @@
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 # CONFIG_NET is not set
 
 #
@@ -282,40 +300,21 @@
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=1024
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -323,38 +322,10 @@
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -376,6 +347,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -390,158 +362,115 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia core support
 #
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -565,12 +494,12 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -585,8 +514,11 @@
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 
@@ -595,49 +527,55 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index 0686ed6..ea3c5e8 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -1,41 +1,55 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc3
-# Mon Oct 30 18:04:49 2006
+# Linux kernel version: 2.6.27
+# Wed Oct 22 19:58:12 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -49,34 +63,48 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -90,59 +118,27 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-CONFIG_SH_TITAN=y
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -151,65 +147,94 @@
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08030000
 CONFIG_MEMORY_SIZE=0x7fd0000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_LANDISK is not set
+CONFIG_SH_TITAN=y
+# CONFIG_SH_LBOX_RE2 is not set
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=30000000
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -219,6 +244,7 @@
 #
 # DMA support
 #
+CONFIG_SH_DMA_API=y
 CONFIG_SH_DMA=y
 CONFIG_NR_ONCHIP_DMA_CHANNELS=8
 # CONFIG_NR_DMA_CHANNELS_BOOL is not set
@@ -226,20 +252,30 @@
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -257,17 +293,10 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
 CONFIG_HOTPLUG_PCI=y
 # CONFIG_HOTPLUG_PCI_FAKE is not set
 # CONFIG_HOTPLUG_PCI_CPCI is not set
@@ -277,30 +306,25 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
@@ -308,13 +332,7 @@
 # CONFIG_IP_FIB_TRIE is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_ROUTE_FWMARK is not set
 CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
-CONFIG_IP_ROUTE_MULTIPATH_RR=m
-CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m
-CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m
-CONFIG_IP_ROUTE_MULTIPATH_DRR=m
 # CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
@@ -336,19 +354,17 @@
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_TCP_DIAG=m
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
 CONFIG_IPV6_PRIVACY=y
 # CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=y
 CONFIG_INET6_ESP=y
 CONFIG_INET6_IPCOMP=y
@@ -360,11 +376,14 @@
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=y
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 CONFIG_BRIDGE_NETFILTER=y
 
 #
@@ -373,134 +392,95 @@
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
 # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_NETBIOS_NS=m
-CONFIG_IP_NF_TFTP=m
-# CONFIG_IP_NF_AMANDA is not set
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_H323=m
-# CONFIG_IP_NF_SIP is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_H323=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
 # CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=y
 CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=y
 # CONFIG_LLC2 is not set
@@ -510,14 +490,7 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
 
 #
 # Queueing/Scheduling
@@ -526,6 +499,7 @@
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -549,6 +523,7 @@
 CONFIG_CLS_U32_MARK=y
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
 CONFIG_NET_EMATCH=y
 CONFIG_NET_EMATCH_STACK=32
 CONFIG_NET_EMATCH_CMP=m
@@ -562,27 +537,37 @@
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
 CONFIG_NET_ACT_IPT=m
+# CONFIG_NET_ACT_NAT is not set
 CONFIG_NET_ACT_PEDIT=m
 # CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
 CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
 CONFIG_IEEE80211_CRYPT_TKIP=y
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_FIB_RULES=y
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -591,20 +576,16 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=m
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=0
@@ -615,6 +596,7 @@
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
 CONFIG_MTD_BLOCK=m
 # CONFIG_MTD_BLOCK_RO is not set
 CONFIG_FTL=m
@@ -623,6 +605,7 @@
 CONFIG_INFTL=m
 CONFIG_RFD_FTL=m
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -644,16 +627,17 @@
 # CONFIG_MTD_CFI_INTELEXT is not set
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -671,34 +655,23 @@
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=m
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -711,20 +684,18 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -732,6 +703,8 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
@@ -752,6 +725,8 @@
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -759,12 +734,9 @@
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
@@ -774,7 +746,6 @@
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -785,6 +756,7 @@
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -795,53 +767,31 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=m
 
 #
@@ -854,32 +804,35 @@
 CONFIG_CICADA_PHY=m
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -891,18 +844,21 @@
 CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_8139TOO_8129 is not set
 CONFIG_8139_OLD_RX_RESET=y
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -910,63 +866,56 @@
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-CONFIG_NET_RADIO=y
-CONFIG_NET_WIRELESS_RTNETLINK=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# Obsolete Wireless cards support (pre-802.11)
+# USB Network Adapters
 #
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-CONFIG_PRISM54=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_BCM43XX=m
-CONFIG_BCM43XX_DEBUG=y
-CONFIG_BCM43XX_DMA=y
-CONFIG_BCM43XX_PIO=y
-CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
-# CONFIG_BCM43XX_DMA_MODE is not set
-# CONFIG_BCM43XX_PIO_MODE is not set
-# CONFIG_ZD1211RW is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -979,25 +928,17 @@
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 # CONFIG_SLIP_MODE_SLIP6 is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -1005,6 +946,7 @@
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -1014,7 +956,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -1024,6 +965,7 @@
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -1037,10 +979,13 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -1059,15 +1004,36 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1075,6 +1041,7 @@
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 CONFIG_SH_WDT=m
 # CONFIG_SH_WDT_MMAP is not set
 
@@ -1088,113 +1055,121 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
 
 #
-# Ftape, the floppy tape device driver
+# Sonics Silicon Backplane
 #
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# TPM devices
+# Multifunction device drivers
 #
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
-# CONFIG_VIDEO_DEV is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia core support
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# USB support
+# USB Input Devices
 #
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1207,76 +1182,34 @@
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_MON=y
-
-#
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 CONFIG_USB_SERIAL_ARK3116=m
 # CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 # CONFIG_USB_SERIAL_CP2101 is not set
@@ -1291,6 +1224,7 @@
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KLSI is not set
@@ -1298,8 +1232,11 @@
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -1308,6 +1245,7 @@
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
 
 #
 # USB Miscellaneous drivers
@@ -1315,10 +1253,11 @@
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1329,80 +1268,53 @@
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=m
 CONFIG_RTC_CLASS=m
 
 #
 # RTC interfaces
 #
-CONFIG_RTC_INTF_SYSFS=m
-CONFIG_RTC_INTF_PROC=m
-CONFIG_RTC_INTF_DEV=m
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# RTC drivers
+# SPI RTC drivers
 #
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SH=m
-# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
-# DMA Engine support
+# on-CPU RTC drivers
 #
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+CONFIG_RTC_DRV_SH=m
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1412,31 +1324,25 @@
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4DEV_FS=m
-# CONFIG_EXT4DEV_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -1447,7 +1353,6 @@
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -1467,12 +1372,12 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=m
 
 #
@@ -1485,34 +1390,32 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1526,7 +1429,6 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-CONFIG_9P_FS=m
 
 #
 # Partition Types
@@ -1548,10 +1450,7 @@
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -1592,101 +1491,180 @@
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_BOOTMEM is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
-# CONFIG_KGDB is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
-# Hardware crypto devices
+# Authenticated Encryption with Associated Data
 #
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
@@ -1695,3 +1673,6 @@
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
index 9650e7c..9067365 100644
--- a/arch/sh/include/asm/gpio.h
+++ b/arch/sh/include/asm/gpio.h
@@ -12,6 +12,9 @@
 #ifndef __ASM_SH_GPIO_H
 #define __ASM_SH_GPIO_H
 
+#include <linux/kernel.h>
+#include <linux/errno.h>
+
 #if defined(CONFIG_CPU_SH3)
 #include <cpu/gpio.h>
 #endif
@@ -62,6 +65,7 @@
 struct pinmux_range {
 	pinmux_enum_t begin;
 	pinmux_enum_t end;
+	pinmux_enum_t force;
 };
 
 struct pinmux_info {
@@ -99,9 +103,20 @@
 int gpio_direction_output(unsigned gpio, int value);
 int gpio_get_value(unsigned gpio);
 void gpio_set_value(unsigned gpio, int value);
-static inline int gpio_export(unsigned gpio, bool direction_may_change)
+
+/* IRQ modes are unspported */
+static inline int gpio_to_irq(unsigned gpio)
 {
-	return 0;
+	WARN_ON(1);
+	return -EINVAL;
 }
 
+static inline int irq_to_gpio(unsigned irq)
+{
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+#include <asm-generic/gpio.h>
+
 #endif /* __ASM_SH_GPIO_H */
diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h
index 49cd690..0b9f896 100644
--- a/arch/sh/include/asm/kdebug.h
+++ b/arch/sh/include/asm/kdebug.h
@@ -4,6 +4,7 @@
 /* Grossly misnamed. */
 enum die_val {
 	DIE_TRAP,
+	DIE_OOPS,
 };
 
 #endif /* __ASM_SH_KDEBUG_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7785.h b/arch/sh/include/cpu-sh4/cpu/sh7785.h
new file mode 100644
index 0000000..e4006af
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/sh7785.h
@@ -0,0 +1,234 @@
+#ifndef __ASM_SH7785_H__
+#define __ASM_SH7785_H__
+
+enum {
+	/* PA */
+	GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
+	GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
+
+	/* PB */
+	GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
+	GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
+
+	/* PC */
+	GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
+	GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
+
+	/* PD */
+	GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
+	GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
+
+	/* PE */
+	GPIO_PE5, GPIO_PE4, GPIO_PE3, GPIO_PE2,
+	GPIO_PE1, GPIO_PE0,
+
+	/* PF */
+	GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
+	GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
+
+	/* PG */
+	GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
+	GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
+
+	/* PH */
+	GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4,
+	GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
+
+	/* PJ */
+	GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
+	GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
+
+	/* PK */
+	GPIO_PK7, GPIO_PK6, GPIO_PK5, GPIO_PK4,
+	GPIO_PK3, GPIO_PK2, GPIO_PK1, GPIO_PK0,
+
+	/* PL */
+	GPIO_PL7, GPIO_PL6, GPIO_PL5, GPIO_PL4,
+	GPIO_PL3, GPIO_PL2, GPIO_PL1, GPIO_PL0,
+
+	/* PM */
+	GPIO_PM1, GPIO_PM0,
+
+	/* PN */
+	GPIO_PN7, GPIO_PN6, GPIO_PN5, GPIO_PN4,
+	GPIO_PN3, GPIO_PN2, GPIO_PN1, GPIO_PN0,
+
+	/* PP */
+	GPIO_PP5, GPIO_PP4,
+	GPIO_PP3, GPIO_PP2, GPIO_PP1, GPIO_PP0,
+
+	/* PQ */
+	GPIO_PQ4,
+	GPIO_PQ3, GPIO_PQ2, GPIO_PQ1, GPIO_PQ0,
+
+	/* PR */
+	GPIO_PR3, GPIO_PR2, GPIO_PR1, GPIO_PR0,
+
+	GPIO_FN_D63_AD31,
+	GPIO_FN_D62_AD30,
+	GPIO_FN_D61_AD29,
+	GPIO_FN_D60_AD28,
+	GPIO_FN_D59_AD27,
+	GPIO_FN_D58_AD26,
+	GPIO_FN_D57_AD25,
+	GPIO_FN_D56_AD24,
+	GPIO_FN_D55_AD23,
+	GPIO_FN_D54_AD22,
+	GPIO_FN_D53_AD21,
+	GPIO_FN_D52_AD20,
+	GPIO_FN_D51_AD19,
+	GPIO_FN_D50_AD18,
+	GPIO_FN_D49_AD17_DB5,
+	GPIO_FN_D48_AD16_DB4,
+	GPIO_FN_D47_AD15_DB3,
+	GPIO_FN_D46_AD14_DB2,
+	GPIO_FN_D45_AD13_DB1,
+	GPIO_FN_D44_AD12_DB0,
+	GPIO_FN_D43_AD11_DG5,
+	GPIO_FN_D42_AD10_DG4,
+	GPIO_FN_D41_AD9_DG3,
+	GPIO_FN_D40_AD8_DG2,
+	GPIO_FN_D39_AD7_DG1,
+	GPIO_FN_D38_AD6_DG0,
+	GPIO_FN_D37_AD5_DR5,
+	GPIO_FN_D36_AD4_DR4,
+	GPIO_FN_D35_AD3_DR3,
+	GPIO_FN_D34_AD2_DR2,
+	GPIO_FN_D33_AD1_DR1,
+	GPIO_FN_D32_AD0_DR0,
+	GPIO_FN_REQ1,
+	GPIO_FN_REQ2,
+	GPIO_FN_REQ3,
+	GPIO_FN_GNT1,
+	GPIO_FN_GNT2,
+	GPIO_FN_GNT3,
+	GPIO_FN_MMCCLK,
+	GPIO_FN_D31,
+	GPIO_FN_D30,
+	GPIO_FN_D29,
+	GPIO_FN_D28,
+	GPIO_FN_D27,
+	GPIO_FN_D26,
+	GPIO_FN_D25,
+	GPIO_FN_D24,
+	GPIO_FN_D23,
+	GPIO_FN_D22,
+	GPIO_FN_D21,
+	GPIO_FN_D20,
+	GPIO_FN_D19,
+	GPIO_FN_D18,
+	GPIO_FN_D17,
+	GPIO_FN_D16,
+	GPIO_FN_SCIF1_SCK,
+	GPIO_FN_SCIF1_RXD,
+	GPIO_FN_SCIF1_TXD,
+	GPIO_FN_SCIF0_CTS,
+	GPIO_FN_INTD,
+	GPIO_FN_FCE,
+	GPIO_FN_SCIF0_RTS,
+	GPIO_FN_HSPI_CS,
+	GPIO_FN_FSE,
+	GPIO_FN_SCIF0_SCK,
+	GPIO_FN_HSPI_CLK,
+	GPIO_FN_FRE,
+	GPIO_FN_SCIF0_RXD,
+	GPIO_FN_HSPI_RX,
+	GPIO_FN_FRB,
+	GPIO_FN_SCIF0_TXD,
+	GPIO_FN_HSPI_TX,
+	GPIO_FN_FWE,
+	GPIO_FN_SCIF5_TXD,
+	GPIO_FN_HAC1_SYNC,
+	GPIO_FN_SSI1_WS,
+	GPIO_FN_SIOF_TXD_PJ,
+	GPIO_FN_HAC0_SDOUT,
+	GPIO_FN_SSI0_SDATA,
+	GPIO_FN_SIOF_RXD_PJ,
+	GPIO_FN_HAC0_SDIN,
+	GPIO_FN_SSI0_SCK,
+	GPIO_FN_SIOF_SYNC_PJ,
+	GPIO_FN_HAC0_SYNC,
+	GPIO_FN_SSI0_WS,
+	GPIO_FN_SIOF_MCLK_PJ,
+	GPIO_FN_HAC_RES,
+	GPIO_FN_SIOF_SCK_PJ,
+	GPIO_FN_HAC0_BITCLK,
+	GPIO_FN_SSI0_CLK,
+	GPIO_FN_HAC1_BITCLK,
+	GPIO_FN_SSI1_CLK,
+	GPIO_FN_TCLK,
+	GPIO_FN_IOIS16,
+	GPIO_FN_STATUS0,
+	GPIO_FN_DRAK0_PK3,
+	GPIO_FN_STATUS1,
+	GPIO_FN_DRAK1_PK2,
+	GPIO_FN_DACK2,
+	GPIO_FN_SCIF2_TXD,
+	GPIO_FN_MMCCMD,
+	GPIO_FN_SIOF_TXD_PK,
+	GPIO_FN_DACK3,
+	GPIO_FN_SCIF2_SCK,
+	GPIO_FN_MMCDAT,
+	GPIO_FN_SIOF_SCK_PK,
+	GPIO_FN_DREQ0,
+	GPIO_FN_DREQ1,
+	GPIO_FN_DRAK0_PK1,
+	GPIO_FN_DRAK1_PK0,
+	GPIO_FN_DREQ2,
+	GPIO_FN_INTB,
+	GPIO_FN_DREQ3,
+	GPIO_FN_INTC,
+	GPIO_FN_DRAK2,
+	GPIO_FN_CE2A,
+	GPIO_FN_IRL4,
+	GPIO_FN_FD4,
+	GPIO_FN_IRL5,
+	GPIO_FN_FD5,
+	GPIO_FN_IRL6,
+	GPIO_FN_FD6,
+	GPIO_FN_IRL7,
+	GPIO_FN_FD7,
+	GPIO_FN_DRAK3,
+	GPIO_FN_CE2B,
+	GPIO_FN_BREQ_BSACK,
+	GPIO_FN_BACK_BSREQ,
+	GPIO_FN_SCIF5_RXD,
+	GPIO_FN_HAC1_SDIN,
+	GPIO_FN_SSI1_SCK,
+	GPIO_FN_SCIF5_SCK,
+	GPIO_FN_HAC1_SDOUT,
+	GPIO_FN_SSI1_SDATA,
+	GPIO_FN_SCIF3_TXD,
+	GPIO_FN_FCLE,
+	GPIO_FN_SCIF3_RXD,
+	GPIO_FN_FALE,
+	GPIO_FN_SCIF3_SCK,
+	GPIO_FN_FD0,
+	GPIO_FN_SCIF4_TXD,
+	GPIO_FN_FD1,
+	GPIO_FN_SCIF4_RXD,
+	GPIO_FN_FD2,
+	GPIO_FN_SCIF4_SCK,
+	GPIO_FN_FD3,
+	GPIO_FN_DEVSEL_DCLKOUT,
+	GPIO_FN_STOP_CDE,
+	GPIO_FN_LOCK_ODDF,
+	GPIO_FN_TRDY_DISPL,
+	GPIO_FN_IRDY_HSYNC,
+	GPIO_FN_PCIFRAME_VSYNC,
+	GPIO_FN_INTA,
+	GPIO_FN_GNT0_GNTIN,
+	GPIO_FN_REQ0_REQOUT,
+	GPIO_FN_PERR,
+	GPIO_FN_SERR,
+	GPIO_FN_WE7_CBE3,
+	GPIO_FN_WE6_CBE2,
+	GPIO_FN_WE5_CBE1,
+	GPIO_FN_WE4_CBE0,
+	GPIO_FN_SCIF2_RXD,
+	GPIO_FN_SIOF_RXD,
+	GPIO_FN_MRESETOUT,
+	GPIO_FN_IRQOUT,
+};
+
+#endif /* __ASM_SH7785_H__ */
diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h
index 306f735..bd26a84 100644
--- a/arch/sh/include/mach-common/mach/highlander.h
+++ b/arch/sh/include/mach-common/mach/highlander.h
@@ -195,4 +195,10 @@
 
 unsigned char *highlander_plat_irq_setup(void);
 
+#ifdef CONFIG_SH_R7785RP
+void highlander_plat_pinmux_setup(void);
+#else
+#define highlander_plat_pinmux_setup()	do { } while (0)
+#endif
+
 #endif  /* __ASM_SH_RENESAS_R7780RP */
diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
index 39a5b88..c465af7 100644
--- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c
@@ -11,7 +11,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/gpio.h>
-#include <asm/sh7203.h>
+#include <cpu/sh7203.h>
 
 enum {
 	PINMUX_RESERVED = 0,
@@ -46,11 +46,10 @@
 	PINMUX_DATA_END,
 
 	PINMUX_INPUT_BEGIN,
+	FORCE_IN,
 	PA7_IN, PA6_IN, PA5_IN, PA4_IN,
 	PA3_IN, PA2_IN, PA1_IN, PA0_IN,
 	PB11_IN, PB10_IN, PB9_IN, PB8_IN,
-	PB7_IN, PB6_IN, PB5_IN, PB4_IN,
-	PB3_IN, PB2_IN, PB1_IN, PB0_IN,
 	PC14_IN, PC13_IN, PC12_IN,
 	PC11_IN, PC10_IN, PC9_IN, PC8_IN,
 	PC7_IN, PC6_IN, PC5_IN, PC4_IN,
@@ -74,7 +73,7 @@
 	PINMUX_INPUT_END,
 
 	PINMUX_OUTPUT_BEGIN,
-	PB12_OUT,
+	FORCE_OUT,
 	PB11_OUT, PB10_OUT, PB9_OUT, PB8_OUT,
 	PC14_OUT, PC13_OUT, PC12_OUT,
 	PC11_OUT, PC10_OUT, PC9_OUT, PC8_OUT,
@@ -285,7 +284,7 @@
 	PINMUX_DATA(PA0_DATA, PA0_IN),
 
 	/* PB */
-	PINMUX_DATA(PB12_DATA, PB12MD_00, PB12_OUT),
+	PINMUX_DATA(PB12_DATA, PB12MD_00, FORCE_OUT),
 	PINMUX_DATA(WDTOVF_MARK, PB12MD_01),
 	PINMUX_DATA(IRQOUT_MARK, PB12MD_10, PB12IRQ_00),
 	PINMUX_DATA(REFOUT_MARK, PB12MD_10, PB12IRQ_01),
@@ -306,42 +305,42 @@
 	PINMUX_DATA(CRX0_MARK, PB8MD_01),
 	PINMUX_DATA(CRX0_CRX1_MARK, PB8MD_10),
 
-	PINMUX_DATA(PB7_DATA, PB7MD_00, PB7_IN),
+	PINMUX_DATA(PB7_DATA, PB7MD_00, FORCE_IN),
 	PINMUX_DATA(SDA3_MARK, PB7MD_01),
 	PINMUX_DATA(PINT7_PB_MARK, PB7MD_10),
 	PINMUX_DATA(IRQ7_PB_MARK, PB7MD_11),
 
-	PINMUX_DATA(PB6_DATA, PB6MD_00, PB6_IN),
+	PINMUX_DATA(PB6_DATA, PB6MD_00, FORCE_IN),
 	PINMUX_DATA(SCL3_MARK, PB6MD_01),
 	PINMUX_DATA(PINT6_PB_MARK, PB6MD_10),
 	PINMUX_DATA(IRQ6_PB_MARK, PB6MD_11),
 
-	PINMUX_DATA(PB5_DATA, PB5MD_00, PB5_IN),
+	PINMUX_DATA(PB5_DATA, PB5MD_00, FORCE_IN),
 	PINMUX_DATA(SDA2_MARK, PB6MD_01),
 	PINMUX_DATA(PINT5_PB_MARK, PB6MD_10),
 	PINMUX_DATA(IRQ5_PB_MARK, PB6MD_11),
 
-	PINMUX_DATA(PB4_DATA, PB4MD_00, PB4_IN),
+	PINMUX_DATA(PB4_DATA, PB4MD_00, FORCE_IN),
 	PINMUX_DATA(SCL2_MARK, PB4MD_01),
 	PINMUX_DATA(PINT4_PB_MARK, PB4MD_10),
 	PINMUX_DATA(IRQ4_PB_MARK, PB4MD_11),
 
-	PINMUX_DATA(PB3_DATA, PB3MD_00, PB3_IN),
+	PINMUX_DATA(PB3_DATA, PB3MD_00, FORCE_IN),
 	PINMUX_DATA(SDA1_MARK, PB3MD_01),
 	PINMUX_DATA(PINT3_PB_MARK, PB3MD_10),
 	PINMUX_DATA(IRQ3_PB_MARK, PB3MD_11),
 
-	PINMUX_DATA(PB2_DATA, PB2MD_00, PB2_IN),
+	PINMUX_DATA(PB2_DATA, PB2MD_00, FORCE_IN),
 	PINMUX_DATA(SCL1_MARK, PB2MD_01),
 	PINMUX_DATA(PINT2_PB_MARK, PB2MD_10),
 	PINMUX_DATA(IRQ2_PB_MARK, PB2MD_11),
 
-	PINMUX_DATA(PB1_DATA, PB1MD_00, PB1_IN),
+	PINMUX_DATA(PB1_DATA, PB1MD_00, FORCE_IN),
 	PINMUX_DATA(SDA0_MARK, PB1MD_01),
 	PINMUX_DATA(PINT1_PB_MARK, PB1MD_10),
 	PINMUX_DATA(IRQ1_PB_MARK, PB1MD_11),
 
-	PINMUX_DATA(PB0_DATA, PB0MD_00, PB0_IN),
+	PINMUX_DATA(PB0_DATA, PB0MD_00, FORCE_IN),
 	PINMUX_DATA(SCL0_MARK, PB0MD_01),
 	PINMUX_DATA(PINT0_PB_MARK, PB0MD_10),
 	PINMUX_DATA(IRQ0_PB_MARK, PB0MD_11),
@@ -1575,8 +1574,8 @@
 	.name = "sh7203_pfc",
 	.reserved_id = PINMUX_RESERVED,
 	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
-	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
-	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END, FORCE_IN },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END, FORCE_OUT },
 	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
 	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
 
@@ -1595,5 +1594,4 @@
 {
 	return register_pinmux(&sh7203_pinmux_info);
 }
-
 arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index be9a0c1..8e344ec 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -30,6 +30,7 @@
 # Pinmux setup
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7722)	:= pinmux-sh7722.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7723)	:= pinmux-sh7723.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7785)	:= pinmux-sh7785.o
 
 obj-y			+= $(clock-y)
 obj-$(CONFIG_SMP)	+= $(smp-y)
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
index 45889d4..3177d0d 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
@@ -18,7 +18,6 @@
 
 static int bfc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 };
 static int p0fc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 };
-static int p1fc_divisors[] = { 1, 1, 1, 16, 1, 1, 1, 1 };
 static int cfc_divisors[] = { 1, 1, 4, 1, 1, 1, 1, 1 };
 
 static void master_clk_init(struct clk *clk)
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
new file mode 100644
index 0000000..5ebc25f
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c
@@ -0,0 +1,1310 @@
+/*
+ * SH7785 Pinmux
+ *
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <cpu/sh7785.h>
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
+	PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
+	PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
+	PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
+	PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
+	PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
+	PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
+	PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
+	PE5_DATA, PE4_DATA, PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
+	PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
+	PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
+	PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
+	PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
+	PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
+	PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
+	PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
+	PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA,
+	PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA,
+	PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA,
+	PL7_DATA, PL6_DATA, PL5_DATA, PL4_DATA,
+	PL3_DATA, PL2_DATA, PL1_DATA, PL0_DATA,
+	PM1_DATA, PM0_DATA,
+	PN7_DATA, PN6_DATA, PN5_DATA, PN4_DATA,
+	PN3_DATA, PN2_DATA, PN1_DATA, PN0_DATA,
+	PP5_DATA, PP4_DATA, PP3_DATA, PP2_DATA, PP1_DATA, PP0_DATA,
+	PQ4_DATA, PQ3_DATA, PQ2_DATA, PQ1_DATA, PQ0_DATA,
+	PR3_DATA, PR2_DATA, PR1_DATA, PR0_DATA,
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PA7_IN, PA6_IN, PA5_IN, PA4_IN,
+	PA3_IN, PA2_IN, PA1_IN, PA0_IN,
+	PB7_IN, PB6_IN, PB5_IN, PB4_IN,
+	PB3_IN, PB2_IN, PB1_IN, PB0_IN,
+	PC7_IN, PC6_IN, PC5_IN, PC4_IN,
+	PC3_IN, PC2_IN, PC1_IN, PC0_IN,
+	PD7_IN, PD6_IN, PD5_IN, PD4_IN,
+	PD3_IN, PD2_IN, PD1_IN, PD0_IN,
+	PE5_IN, PE4_IN, PE3_IN, PE2_IN, PE1_IN, PE0_IN,
+	PF7_IN, PF6_IN, PF5_IN, PF4_IN,
+	PF3_IN, PF2_IN, PF1_IN, PF0_IN,
+	PG7_IN, PG6_IN, PG5_IN, PG4_IN,
+	PG3_IN, PG2_IN, PG1_IN, PG0_IN,
+	PH7_IN, PH6_IN, PH5_IN, PH4_IN,
+	PH3_IN, PH2_IN, PH1_IN, PH0_IN,
+	PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN,
+	PJ3_IN, PJ2_IN, PJ1_IN, PJ0_IN,
+	PK7_IN, PK6_IN, PK5_IN, PK4_IN,
+	PK3_IN, PK2_IN, PK1_IN, PK0_IN,
+	PL7_IN, PL6_IN, PL5_IN, PL4_IN,
+	PL3_IN, PL2_IN, PL1_IN, PL0_IN,
+	PM1_IN, PM0_IN,
+	PN7_IN, PN6_IN, PN5_IN, PN4_IN,
+	PN3_IN, PN2_IN, PN1_IN, PN0_IN,
+	PP5_IN, PP4_IN, PP3_IN, PP2_IN, PP1_IN, PP0_IN,
+	PQ4_IN, PQ3_IN, PQ2_IN, PQ1_IN, PQ0_IN,
+	PR3_IN, PR2_IN, PR1_IN, PR0_IN,
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PA7_IN_PU, PA6_IN_PU, PA5_IN_PU, PA4_IN_PU,
+	PA3_IN_PU, PA2_IN_PU, PA1_IN_PU, PA0_IN_PU,
+	PB7_IN_PU, PB6_IN_PU, PB5_IN_PU, PB4_IN_PU,
+	PB3_IN_PU, PB2_IN_PU, PB1_IN_PU, PB0_IN_PU,
+	PC7_IN_PU, PC6_IN_PU, PC5_IN_PU, PC4_IN_PU,
+	PC3_IN_PU, PC2_IN_PU, PC1_IN_PU, PC0_IN_PU,
+	PD7_IN_PU, PD6_IN_PU, PD5_IN_PU, PD4_IN_PU,
+	PD3_IN_PU, PD2_IN_PU, PD1_IN_PU, PD0_IN_PU,
+	PE5_IN_PU, PE4_IN_PU, PE3_IN_PU, PE2_IN_PU, PE1_IN_PU, PE0_IN_PU,
+	PF7_IN_PU, PF6_IN_PU, PF5_IN_PU, PF4_IN_PU,
+	PF3_IN_PU, PF2_IN_PU, PF1_IN_PU, PF0_IN_PU,
+	PG7_IN_PU, PG6_IN_PU, PG5_IN_PU, PG4_IN_PU,
+	PG3_IN_PU, PG2_IN_PU, PG1_IN_PU, PG0_IN_PU,
+	PH7_IN_PU, PH6_IN_PU, PH5_IN_PU, PH4_IN_PU,
+	PH3_IN_PU, PH2_IN_PU, PH1_IN_PU, PH0_IN_PU,
+	PJ7_IN_PU, PJ6_IN_PU, PJ5_IN_PU, PJ4_IN_PU,
+	PJ3_IN_PU, PJ2_IN_PU, PJ1_IN_PU, PJ0_IN_PU,
+	PK7_IN_PU, PK6_IN_PU, PK5_IN_PU, PK4_IN_PU,
+	PK3_IN_PU, PK2_IN_PU, PK1_IN_PU, PK0_IN_PU,
+	PL7_IN_PU, PL6_IN_PU, PL5_IN_PU, PL4_IN_PU,
+	PL3_IN_PU, PL2_IN_PU, PL1_IN_PU, PL0_IN_PU,
+	PM1_IN_PU, PM0_IN_PU,
+	PN7_IN_PU, PN6_IN_PU, PN5_IN_PU, PN4_IN_PU,
+	PN3_IN_PU, PN2_IN_PU, PN1_IN_PU, PN0_IN_PU,
+	PP5_IN_PU, PP4_IN_PU, PP3_IN_PU, PP2_IN_PU, PP1_IN_PU, PP0_IN_PU,
+	PQ4_IN_PU, PQ3_IN_PU, PQ2_IN_PU, PQ1_IN_PU, PQ0_IN_PU,
+	PR3_IN_PU, PR2_IN_PU, PR1_IN_PU, PR0_IN_PU,
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PA7_OUT, PA6_OUT, PA5_OUT, PA4_OUT,
+	PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT,
+	PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
+	PB3_OUT, PB2_OUT, PB1_OUT, PB0_OUT,
+	PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
+	PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
+	PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
+	PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
+	PE5_OUT, PE4_OUT, PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT,
+	PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
+	PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
+	PG7_OUT, PG6_OUT, PG5_OUT, PG4_OUT,
+	PG3_OUT, PG2_OUT, PG1_OUT, PG0_OUT,
+	PH7_OUT, PH6_OUT, PH5_OUT, PH4_OUT,
+	PH3_OUT, PH2_OUT, PH1_OUT, PH0_OUT,
+	PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT,
+	PJ3_OUT, PJ2_OUT, PJ1_OUT, PJ0_OUT,
+	PK7_OUT, PK6_OUT, PK5_OUT, PK4_OUT,
+	PK3_OUT, PK2_OUT, PK1_OUT, PK0_OUT,
+	PL7_OUT, PL6_OUT, PL5_OUT, PL4_OUT,
+	PL3_OUT, PL2_OUT, PL1_OUT, PL0_OUT,
+	PM1_OUT, PM0_OUT,
+	PN7_OUT, PN6_OUT, PN5_OUT, PN4_OUT,
+	PN3_OUT, PN2_OUT, PN1_OUT, PN0_OUT,
+	PP5_OUT, PP4_OUT, PP3_OUT, PP2_OUT, PP1_OUT, PP0_OUT,
+	PQ4_OUT, PQ3_OUT, PQ2_OUT, PQ1_OUT, PQ0_OUT,
+	PR3_OUT, PR2_OUT, PR1_OUT, PR0_OUT,
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PA7_FN, PA6_FN, PA5_FN, PA4_FN,
+	PA3_FN, PA2_FN, PA1_FN, PA0_FN,
+	PB7_FN, PB6_FN, PB5_FN, PB4_FN,
+	PB3_FN, PB2_FN, PB1_FN, PB0_FN,
+	PC7_FN, PC6_FN, PC5_FN, PC4_FN,
+	PC3_FN, PC2_FN, PC1_FN, PC0_FN,
+	PD7_FN, PD6_FN, PD5_FN, PD4_FN,
+	PD3_FN, PD2_FN, PD1_FN, PD0_FN,
+	PE5_FN, PE4_FN, PE3_FN, PE2_FN, PE1_FN, PE0_FN,
+	PF7_FN, PF6_FN, PF5_FN, PF4_FN,
+	PF3_FN, PF2_FN, PF1_FN, PF0_FN,
+	PG7_FN, PG6_FN, PG5_FN, PG4_FN,
+	PG3_FN, PG2_FN, PG1_FN, PG0_FN,
+	PH7_FN, PH6_FN, PH5_FN, PH4_FN,
+	PH3_FN, PH2_FN, PH1_FN, PH0_FN,
+	PJ7_FN, PJ6_FN, PJ5_FN, PJ4_FN,
+	PJ3_FN, PJ2_FN, PJ1_FN, PJ0_FN,
+	PK7_FN, PK6_FN, PK5_FN, PK4_FN,
+	PK3_FN, PK2_FN, PK1_FN, PK0_FN,
+	PL7_FN, PL6_FN, PL5_FN, PL4_FN,
+	PL3_FN, PL2_FN, PL1_FN, PL0_FN,
+	PM1_FN, PM0_FN,
+	PN7_FN, PN6_FN, PN5_FN, PN4_FN,
+	PN3_FN, PN2_FN, PN1_FN, PN0_FN,
+	PP5_FN, PP4_FN, PP3_FN, PP2_FN, PP1_FN, PP0_FN,
+	PQ4_FN, PQ3_FN, PQ2_FN, PQ1_FN, PQ0_FN,
+	PR3_FN, PR2_FN, PR1_FN, PR0_FN,
+	P1MSEL15_0, P1MSEL15_1,
+	P1MSEL14_0, P1MSEL14_1,
+	P1MSEL13_0, P1MSEL13_1,
+	P1MSEL12_0, P1MSEL12_1,
+	P1MSEL11_0, P1MSEL11_1,
+	P1MSEL10_0, P1MSEL10_1,
+	P1MSEL9_0, P1MSEL9_1,
+	P1MSEL8_0, P1MSEL8_1,
+	P1MSEL7_0, P1MSEL7_1,
+	P1MSEL6_0, P1MSEL6_1,
+	P1MSEL5_0,
+	P1MSEL4_0, P1MSEL4_1,
+	P1MSEL3_0, P1MSEL3_1,
+	P1MSEL2_0, P1MSEL2_1,
+	P1MSEL1_0, P1MSEL1_1,
+	P1MSEL0_0, P1MSEL0_1,
+	P2MSEL2_0, P2MSEL2_1,
+	P2MSEL1_0, P2MSEL1_1,
+	P2MSEL0_0, P2MSEL0_1,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	D63_AD31_MARK,
+	D62_AD30_MARK,
+	D61_AD29_MARK,
+	D60_AD28_MARK,
+	D59_AD27_MARK,
+	D58_AD26_MARK,
+	D57_AD25_MARK,
+	D56_AD24_MARK,
+	D55_AD23_MARK,
+	D54_AD22_MARK,
+	D53_AD21_MARK,
+	D52_AD20_MARK,
+	D51_AD19_MARK,
+	D50_AD18_MARK,
+	D49_AD17_DB5_MARK,
+	D48_AD16_DB4_MARK,
+	D47_AD15_DB3_MARK,
+	D46_AD14_DB2_MARK,
+	D45_AD13_DB1_MARK,
+	D44_AD12_DB0_MARK,
+	D43_AD11_DG5_MARK,
+	D42_AD10_DG4_MARK,
+	D41_AD9_DG3_MARK,
+	D40_AD8_DG2_MARK,
+	D39_AD7_DG1_MARK,
+	D38_AD6_DG0_MARK,
+	D37_AD5_DR5_MARK,
+	D36_AD4_DR4_MARK,
+	D35_AD3_DR3_MARK,
+	D34_AD2_DR2_MARK,
+	D33_AD1_DR1_MARK,
+	D32_AD0_DR0_MARK,
+	REQ1_MARK,
+	REQ2_MARK,
+	REQ3_MARK,
+	GNT1_MARK,
+	GNT2_MARK,
+	GNT3_MARK,
+	MMCCLK_MARK,
+	D31_MARK,
+	D30_MARK,
+	D29_MARK,
+	D28_MARK,
+	D27_MARK,
+	D26_MARK,
+	D25_MARK,
+	D24_MARK,
+	D23_MARK,
+	D22_MARK,
+	D21_MARK,
+	D20_MARK,
+	D19_MARK,
+	D18_MARK,
+	D17_MARK,
+	D16_MARK,
+	SCIF1_SCK_MARK,
+	SCIF1_RXD_MARK,
+	SCIF1_TXD_MARK,
+	SCIF0_CTS_MARK,
+	INTD_MARK,
+	FCE_MARK,
+	SCIF0_RTS_MARK,
+	HSPI_CS_MARK,
+	FSE_MARK,
+	SCIF0_SCK_MARK,
+	HSPI_CLK_MARK,
+	FRE_MARK,
+	SCIF0_RXD_MARK,
+	HSPI_RX_MARK,
+	FRB_MARK,
+	SCIF0_TXD_MARK,
+	HSPI_TX_MARK,
+	FWE_MARK,
+	SCIF5_TXD_MARK,
+	HAC1_SYNC_MARK,
+	SSI1_WS_MARK,
+	SIOF_TXD_PJ_MARK,
+	HAC0_SDOUT_MARK,
+	SSI0_SDATA_MARK,
+	SIOF_RXD_PJ_MARK,
+	HAC0_SDIN_MARK,
+	SSI0_SCK_MARK,
+	SIOF_SYNC_PJ_MARK,
+	HAC0_SYNC_MARK,
+	SSI0_WS_MARK,
+	SIOF_MCLK_PJ_MARK,
+	HAC_RES_MARK,
+	SIOF_SCK_PJ_MARK,
+	HAC0_BITCLK_MARK,
+	SSI0_CLK_MARK,
+	HAC1_BITCLK_MARK,
+	SSI1_CLK_MARK,
+	TCLK_MARK,
+	IOIS16_MARK,
+	STATUS0_MARK,
+	DRAK0_PK3_MARK,
+	STATUS1_MARK,
+	DRAK1_PK2_MARK,
+	DACK2_MARK,
+	SCIF2_TXD_MARK,
+	MMCCMD_MARK,
+	SIOF_TXD_PK_MARK,
+	DACK3_MARK,
+	SCIF2_SCK_MARK,
+	MMCDAT_MARK,
+	SIOF_SCK_PK_MARK,
+	DREQ0_MARK,
+	DREQ1_MARK,
+	DRAK0_PK1_MARK,
+	DRAK1_PK0_MARK,
+	DREQ2_MARK,
+	INTB_MARK,
+	DREQ3_MARK,
+	INTC_MARK,
+	DRAK2_MARK,
+	CE2A_MARK,
+	IRL4_MARK,
+	FD4_MARK,
+	IRL5_MARK,
+	FD5_MARK,
+	IRL6_MARK,
+	FD6_MARK,
+	IRL7_MARK,
+	FD7_MARK,
+	DRAK3_MARK,
+	CE2B_MARK,
+	BREQ_BSACK_MARK,
+	BACK_BSREQ_MARK,
+	SCIF5_RXD_MARK,
+	HAC1_SDIN_MARK,
+	SSI1_SCK_MARK,
+	SCIF5_SCK_MARK,
+	HAC1_SDOUT_MARK,
+	SSI1_SDATA_MARK,
+	SCIF3_TXD_MARK,
+	FCLE_MARK,
+	SCIF3_RXD_MARK,
+	FALE_MARK,
+	SCIF3_SCK_MARK,
+	FD0_MARK,
+	SCIF4_TXD_MARK,
+	FD1_MARK,
+	SCIF4_RXD_MARK,
+	FD2_MARK,
+	SCIF4_SCK_MARK,
+	FD3_MARK,
+	DEVSEL_DCLKOUT_MARK,
+	STOP_CDE_MARK,
+	LOCK_ODDF_MARK,
+	TRDY_DISPL_MARK,
+	IRDY_HSYNC_MARK,
+	PCIFRAME_VSYNC_MARK,
+	INTA_MARK,
+	GNT0_GNTIN_MARK,
+	REQ0_REQOUT_MARK,
+	PERR_MARK,
+	SERR_MARK,
+	WE7_CBE3_MARK,
+	WE6_CBE2_MARK,
+	WE5_CBE1_MARK,
+	WE4_CBE0_MARK,
+	SCIF2_RXD_MARK,
+	SIOF_RXD_MARK,
+	MRESETOUT_MARK,
+	IRQOUT_MARK,
+	PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+
+	/* PA GPIO */
+	PINMUX_DATA(PA7_DATA, PA7_IN, PA7_OUT, PA7_IN_PU),
+	PINMUX_DATA(PA6_DATA, PA6_IN, PA6_OUT, PA6_IN_PU),
+	PINMUX_DATA(PA5_DATA, PA5_IN, PA5_OUT, PA5_IN_PU),
+	PINMUX_DATA(PA4_DATA, PA4_IN, PA4_OUT, PA4_IN_PU),
+	PINMUX_DATA(PA3_DATA, PA3_IN, PA3_OUT, PA3_IN_PU),
+	PINMUX_DATA(PA2_DATA, PA2_IN, PA2_OUT, PA2_IN_PU),
+	PINMUX_DATA(PA1_DATA, PA1_IN, PA1_OUT, PA1_IN_PU),
+	PINMUX_DATA(PA0_DATA, PA0_IN, PA0_OUT, PA0_IN_PU),
+
+	/* PB GPIO */
+	PINMUX_DATA(PB7_DATA, PB7_IN, PB7_OUT, PB7_IN_PU),
+	PINMUX_DATA(PB6_DATA, PB6_IN, PB6_OUT, PB6_IN_PU),
+	PINMUX_DATA(PB5_DATA, PB5_IN, PB5_OUT, PB5_IN_PU),
+	PINMUX_DATA(PB4_DATA, PB4_IN, PB4_OUT, PB4_IN_PU),
+	PINMUX_DATA(PB3_DATA, PB3_IN, PB3_OUT, PB3_IN_PU),
+	PINMUX_DATA(PB2_DATA, PB2_IN, PB2_OUT, PB2_IN_PU),
+	PINMUX_DATA(PB1_DATA, PB1_IN, PB1_OUT, PB1_IN_PU),
+	PINMUX_DATA(PB0_DATA, PB0_IN, PB0_OUT, PB0_IN_PU),
+
+	/* PC GPIO */
+	PINMUX_DATA(PC7_DATA, PC7_IN, PC7_OUT, PC7_IN_PU),
+	PINMUX_DATA(PC6_DATA, PC6_IN, PC6_OUT, PC6_IN_PU),
+	PINMUX_DATA(PC5_DATA, PC5_IN, PC5_OUT, PC5_IN_PU),
+	PINMUX_DATA(PC4_DATA, PC4_IN, PC4_OUT, PC4_IN_PU),
+	PINMUX_DATA(PC3_DATA, PC3_IN, PC3_OUT, PC3_IN_PU),
+	PINMUX_DATA(PC2_DATA, PC2_IN, PC2_OUT, PC2_IN_PU),
+	PINMUX_DATA(PC1_DATA, PC1_IN, PC1_OUT, PC1_IN_PU),
+	PINMUX_DATA(PC0_DATA, PC0_IN, PC0_OUT, PC0_IN_PU),
+
+	/* PD GPIO */
+	PINMUX_DATA(PD7_DATA, PD7_IN, PD7_OUT, PD7_IN_PU),
+	PINMUX_DATA(PD6_DATA, PD6_IN, PD6_OUT, PD6_IN_PU),
+	PINMUX_DATA(PD5_DATA, PD5_IN, PD5_OUT, PD5_IN_PU),
+	PINMUX_DATA(PD4_DATA, PD4_IN, PD4_OUT, PD4_IN_PU),
+	PINMUX_DATA(PD3_DATA, PD3_IN, PD3_OUT, PD3_IN_PU),
+	PINMUX_DATA(PD2_DATA, PD2_IN, PD2_OUT, PD2_IN_PU),
+	PINMUX_DATA(PD1_DATA, PD1_IN, PD1_OUT, PD1_IN_PU),
+	PINMUX_DATA(PD0_DATA, PD0_IN, PD0_OUT, PD0_IN_PU),
+
+	/* PE GPIO */
+	PINMUX_DATA(PE5_DATA, PE5_IN, PE5_OUT, PE5_IN_PU),
+	PINMUX_DATA(PE4_DATA, PE4_IN, PE4_OUT, PE4_IN_PU),
+	PINMUX_DATA(PE3_DATA, PE3_IN, PE3_OUT, PE3_IN_PU),
+	PINMUX_DATA(PE2_DATA, PE2_IN, PE2_OUT, PE2_IN_PU),
+	PINMUX_DATA(PE1_DATA, PE1_IN, PE1_OUT, PE1_IN_PU),
+	PINMUX_DATA(PE0_DATA, PE0_IN, PE0_OUT, PE0_IN_PU),
+
+	/* PF GPIO */
+	PINMUX_DATA(PF7_DATA, PF7_IN, PF7_OUT, PF7_IN_PU),
+	PINMUX_DATA(PF6_DATA, PF6_IN, PF6_OUT, PF6_IN_PU),
+	PINMUX_DATA(PF5_DATA, PF5_IN, PF5_OUT, PF5_IN_PU),
+	PINMUX_DATA(PF4_DATA, PF4_IN, PF4_OUT, PF4_IN_PU),
+	PINMUX_DATA(PF3_DATA, PF3_IN, PF3_OUT, PF3_IN_PU),
+	PINMUX_DATA(PF2_DATA, PF2_IN, PF2_OUT, PF2_IN_PU),
+	PINMUX_DATA(PF1_DATA, PF1_IN, PF1_OUT, PF1_IN_PU),
+	PINMUX_DATA(PF0_DATA, PF0_IN, PF0_OUT, PF0_IN_PU),
+
+	/* PG GPIO */
+	PINMUX_DATA(PG7_DATA, PG7_IN, PG7_OUT, PG7_IN_PU),
+	PINMUX_DATA(PG6_DATA, PG6_IN, PG6_OUT, PG6_IN_PU),
+	PINMUX_DATA(PG5_DATA, PG5_IN, PG5_OUT, PG5_IN_PU),
+	PINMUX_DATA(PG4_DATA, PG4_IN, PG4_OUT, PG4_IN_PU),
+	PINMUX_DATA(PG3_DATA, PG3_IN, PG3_OUT, PG3_IN_PU),
+	PINMUX_DATA(PG2_DATA, PG2_IN, PG2_OUT, PG2_IN_PU),
+	PINMUX_DATA(PG1_DATA, PG1_IN, PG1_OUT, PG1_IN_PU),
+	PINMUX_DATA(PG0_DATA, PG0_IN, PG0_OUT, PG0_IN_PU),
+
+	/* PH GPIO */
+	PINMUX_DATA(PH7_DATA, PH7_IN, PH7_OUT, PH7_IN_PU),
+	PINMUX_DATA(PH6_DATA, PH6_IN, PH6_OUT, PH6_IN_PU),
+	PINMUX_DATA(PH5_DATA, PH5_IN, PH5_OUT, PH5_IN_PU),
+	PINMUX_DATA(PH4_DATA, PH4_IN, PH4_OUT, PH4_IN_PU),
+	PINMUX_DATA(PH3_DATA, PH3_IN, PH3_OUT, PH3_IN_PU),
+	PINMUX_DATA(PH2_DATA, PH2_IN, PH2_OUT, PH2_IN_PU),
+	PINMUX_DATA(PH1_DATA, PH1_IN, PH1_OUT, PH1_IN_PU),
+	PINMUX_DATA(PH0_DATA, PH0_IN, PH0_OUT, PH0_IN_PU),
+
+	/* PJ GPIO */
+	PINMUX_DATA(PJ7_DATA, PJ7_IN, PJ7_OUT, PJ7_IN_PU),
+	PINMUX_DATA(PJ6_DATA, PJ6_IN, PJ6_OUT, PJ6_IN_PU),
+	PINMUX_DATA(PJ5_DATA, PJ5_IN, PJ5_OUT, PJ5_IN_PU),
+	PINMUX_DATA(PJ4_DATA, PJ4_IN, PJ4_OUT, PJ4_IN_PU),
+	PINMUX_DATA(PJ3_DATA, PJ3_IN, PJ3_OUT, PJ3_IN_PU),
+	PINMUX_DATA(PJ2_DATA, PJ2_IN, PJ2_OUT, PJ2_IN_PU),
+	PINMUX_DATA(PJ1_DATA, PJ1_IN, PJ1_OUT, PJ1_IN_PU),
+	PINMUX_DATA(PJ0_DATA, PJ0_IN, PJ0_OUT, PJ0_IN_PU),
+
+	/* PK GPIO */
+	PINMUX_DATA(PK7_DATA, PK7_IN, PK7_OUT, PK7_IN_PU),
+	PINMUX_DATA(PK6_DATA, PK6_IN, PK6_OUT, PK6_IN_PU),
+	PINMUX_DATA(PK5_DATA, PK5_IN, PK5_OUT, PK5_IN_PU),
+	PINMUX_DATA(PK4_DATA, PK4_IN, PK4_OUT, PK4_IN_PU),
+	PINMUX_DATA(PK3_DATA, PK3_IN, PK3_OUT, PK3_IN_PU),
+	PINMUX_DATA(PK2_DATA, PK2_IN, PK2_OUT, PK2_IN_PU),
+	PINMUX_DATA(PK1_DATA, PK1_IN, PK1_OUT, PK1_IN_PU),
+	PINMUX_DATA(PK0_DATA, PK0_IN, PK0_OUT, PK0_IN_PU),
+
+	/* PL GPIO */
+	PINMUX_DATA(PL7_DATA, PL7_IN, PL7_OUT, PL7_IN_PU),
+	PINMUX_DATA(PL6_DATA, PL6_IN, PL6_OUT, PL6_IN_PU),
+	PINMUX_DATA(PL5_DATA, PL5_IN, PL5_OUT, PL5_IN_PU),
+	PINMUX_DATA(PL4_DATA, PL4_IN, PL4_OUT, PL4_IN_PU),
+	PINMUX_DATA(PL3_DATA, PL3_IN, PL3_OUT, PL3_IN_PU),
+	PINMUX_DATA(PL2_DATA, PL2_IN, PL2_OUT, PL2_IN_PU),
+	PINMUX_DATA(PL1_DATA, PL1_IN, PL1_OUT, PL1_IN_PU),
+	PINMUX_DATA(PL0_DATA, PL0_IN, PL0_OUT, PL0_IN_PU),
+
+	/* PM GPIO */
+	PINMUX_DATA(PM1_DATA, PM1_IN, PM1_OUT, PM1_IN_PU),
+	PINMUX_DATA(PM0_DATA, PM0_IN, PM0_OUT, PM0_IN_PU),
+
+	/* PN GPIO */
+	PINMUX_DATA(PN7_DATA, PN7_IN, PN7_OUT, PN7_IN_PU),
+	PINMUX_DATA(PN6_DATA, PN6_IN, PN6_OUT, PN6_IN_PU),
+	PINMUX_DATA(PN5_DATA, PN5_IN, PN5_OUT, PN5_IN_PU),
+	PINMUX_DATA(PN4_DATA, PN4_IN, PN4_OUT, PN4_IN_PU),
+	PINMUX_DATA(PN3_DATA, PN3_IN, PN3_OUT, PN3_IN_PU),
+	PINMUX_DATA(PN2_DATA, PN2_IN, PN2_OUT, PN2_IN_PU),
+	PINMUX_DATA(PN1_DATA, PN1_IN, PN1_OUT, PN1_IN_PU),
+	PINMUX_DATA(PN0_DATA, PN0_IN, PN0_OUT, PN0_IN_PU),
+
+	/* PP GPIO */
+	PINMUX_DATA(PP5_DATA, PP5_IN, PP5_OUT, PP5_IN_PU),
+	PINMUX_DATA(PP4_DATA, PP4_IN, PP4_OUT, PP4_IN_PU),
+	PINMUX_DATA(PP3_DATA, PP3_IN, PP3_OUT, PP3_IN_PU),
+	PINMUX_DATA(PP2_DATA, PP2_IN, PP2_OUT, PP2_IN_PU),
+	PINMUX_DATA(PP1_DATA, PP1_IN, PP1_OUT, PP1_IN_PU),
+	PINMUX_DATA(PP0_DATA, PP0_IN, PP0_OUT, PP0_IN_PU),
+
+	/* PQ GPIO */
+	PINMUX_DATA(PQ4_DATA, PQ4_IN, PQ4_OUT, PQ4_IN_PU),
+	PINMUX_DATA(PQ3_DATA, PQ3_IN, PQ3_OUT, PQ3_IN_PU),
+	PINMUX_DATA(PQ2_DATA, PQ2_IN, PQ2_OUT, PQ2_IN_PU),
+	PINMUX_DATA(PQ1_DATA, PQ1_IN, PQ1_OUT, PQ1_IN_PU),
+	PINMUX_DATA(PQ0_DATA, PQ0_IN, PQ0_OUT, PQ0_IN_PU),
+
+	/* PR GPIO */
+	PINMUX_DATA(PR3_DATA, PR3_IN, PR3_OUT, PR3_IN_PU),
+	PINMUX_DATA(PR2_DATA, PR2_IN, PR2_OUT, PR2_IN_PU),
+	PINMUX_DATA(PR1_DATA, PR1_IN, PR1_OUT, PR1_IN_PU),
+	PINMUX_DATA(PR0_DATA, PR0_IN, PR0_OUT, PR0_IN_PU),
+
+	/* PA FN */
+	PINMUX_DATA(D63_AD31_MARK, PA7_FN),
+	PINMUX_DATA(D62_AD30_MARK, PA6_FN),
+	PINMUX_DATA(D61_AD29_MARK, PA5_FN),
+	PINMUX_DATA(D60_AD28_MARK, PA4_FN),
+	PINMUX_DATA(D59_AD27_MARK, PA3_FN),
+	PINMUX_DATA(D58_AD26_MARK, PA2_FN),
+	PINMUX_DATA(D57_AD25_MARK, PA1_FN),
+	PINMUX_DATA(D56_AD24_MARK, PA0_FN),
+
+	/* PB FN */
+	PINMUX_DATA(D55_AD23_MARK, PB7_FN),
+	PINMUX_DATA(D54_AD22_MARK, PB6_FN),
+	PINMUX_DATA(D53_AD21_MARK, PB5_FN),
+	PINMUX_DATA(D52_AD20_MARK, PB4_FN),
+	PINMUX_DATA(D51_AD19_MARK, PB3_FN),
+	PINMUX_DATA(D50_AD18_MARK, PB2_FN),
+	PINMUX_DATA(D49_AD17_DB5_MARK, PB1_FN),
+	PINMUX_DATA(D48_AD16_DB4_MARK, PB0_FN),
+
+	/* PC FN */
+	PINMUX_DATA(D47_AD15_DB3_MARK, PC7_FN),
+	PINMUX_DATA(D46_AD14_DB2_MARK, PC6_FN),
+	PINMUX_DATA(D45_AD13_DB1_MARK, PC5_FN),
+	PINMUX_DATA(D44_AD12_DB0_MARK, PC4_FN),
+	PINMUX_DATA(D43_AD11_DG5_MARK, PC3_FN),
+	PINMUX_DATA(D42_AD10_DG4_MARK, PC2_FN),
+	PINMUX_DATA(D41_AD9_DG3_MARK, PC1_FN),
+	PINMUX_DATA(D40_AD8_DG2_MARK, PC0_FN),
+
+	/* PD FN */
+	PINMUX_DATA(D39_AD7_DG1_MARK, PD7_FN),
+	PINMUX_DATA(D38_AD6_DG0_MARK, PD6_FN),
+	PINMUX_DATA(D37_AD5_DR5_MARK, PD5_FN),
+	PINMUX_DATA(D36_AD4_DR4_MARK, PD4_FN),
+	PINMUX_DATA(D35_AD3_DR3_MARK, PD3_FN),
+	PINMUX_DATA(D34_AD2_DR2_MARK, PD2_FN),
+	PINMUX_DATA(D33_AD1_DR1_MARK, PD1_FN),
+	PINMUX_DATA(D32_AD0_DR0_MARK, PD0_FN),
+
+	/* PE FN */
+	PINMUX_DATA(REQ1_MARK, PE5_FN),
+	PINMUX_DATA(REQ2_MARK, PE4_FN),
+	PINMUX_DATA(REQ3_MARK, P2MSEL0_0, PE3_FN),
+	PINMUX_DATA(GNT1_MARK, PE2_FN),
+	PINMUX_DATA(GNT2_MARK, PE1_FN),
+	PINMUX_DATA(GNT3_MARK, P2MSEL0_0, PE0_FN),
+	PINMUX_DATA(MMCCLK_MARK, P2MSEL0_1, PE0_FN),
+
+	/* PF FN */
+	PINMUX_DATA(D31_MARK, PF7_FN),
+	PINMUX_DATA(D30_MARK, PF6_FN),
+	PINMUX_DATA(D29_MARK, PF5_FN),
+	PINMUX_DATA(D28_MARK, PF4_FN),
+	PINMUX_DATA(D27_MARK, PF3_FN),
+	PINMUX_DATA(D26_MARK, PF2_FN),
+	PINMUX_DATA(D25_MARK, PF1_FN),
+	PINMUX_DATA(D24_MARK, PF0_FN),
+
+	/* PF FN */
+	PINMUX_DATA(D23_MARK, PG7_FN),
+	PINMUX_DATA(D22_MARK, PG6_FN),
+	PINMUX_DATA(D21_MARK, PG5_FN),
+	PINMUX_DATA(D20_MARK, PG4_FN),
+	PINMUX_DATA(D19_MARK, PG3_FN),
+	PINMUX_DATA(D18_MARK, PG2_FN),
+	PINMUX_DATA(D17_MARK, PG1_FN),
+	PINMUX_DATA(D16_MARK, PG0_FN),
+
+	/* PH FN */
+	PINMUX_DATA(SCIF1_SCK_MARK, PH7_FN),
+	PINMUX_DATA(SCIF1_RXD_MARK, PH6_FN),
+	PINMUX_DATA(SCIF1_TXD_MARK, PH5_FN),
+	PINMUX_DATA(SCIF0_CTS_MARK, PH4_FN),
+	PINMUX_DATA(INTD_MARK, P1MSEL7_1, PH4_FN),
+	PINMUX_DATA(FCE_MARK, P1MSEL8_1, P1MSEL7_0, PH4_FN),
+	PINMUX_DATA(SCIF0_RTS_MARK, P1MSEL8_0, P1MSEL7_0, PH3_FN),
+	PINMUX_DATA(HSPI_CS_MARK, P1MSEL8_0, P1MSEL7_1, PH3_FN),
+	PINMUX_DATA(FSE_MARK, P1MSEL8_1, P1MSEL7_0, PH3_FN),
+	PINMUX_DATA(SCIF0_SCK_MARK, P1MSEL8_0, P1MSEL7_0, PH2_FN),
+	PINMUX_DATA(HSPI_CLK_MARK, P1MSEL8_0, P1MSEL7_1, PH2_FN),
+	PINMUX_DATA(FRE_MARK, P1MSEL8_1, P1MSEL7_0, PH2_FN),
+	PINMUX_DATA(SCIF0_RXD_MARK, P1MSEL8_0, P1MSEL7_0, PH1_FN),
+	PINMUX_DATA(HSPI_RX_MARK, P1MSEL8_0, P1MSEL7_1, PH1_FN),
+	PINMUX_DATA(FRB_MARK, P1MSEL8_1, P1MSEL7_0, PH1_FN),
+	PINMUX_DATA(SCIF0_TXD_MARK, P1MSEL8_0, P1MSEL7_0, PH0_FN),
+	PINMUX_DATA(HSPI_TX_MARK, P1MSEL8_0, P1MSEL7_1, PH0_FN),
+	PINMUX_DATA(FWE_MARK, P1MSEL8_1, P1MSEL7_0, PH0_FN),
+
+	/* PJ FN */
+	PINMUX_DATA(SCIF5_TXD_MARK, P1MSEL2_0, P1MSEL1_0, PJ7_FN),
+	PINMUX_DATA(HAC1_SYNC_MARK, P1MSEL2_0, P1MSEL1_1, PJ7_FN),
+	PINMUX_DATA(SSI1_WS_MARK, P1MSEL2_1, P1MSEL1_0, PJ7_FN),
+	PINMUX_DATA(SIOF_TXD_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ6_FN),
+	PINMUX_DATA(HAC0_SDOUT_MARK, P1MSEL4_0, P1MSEL3_1, PJ6_FN),
+	PINMUX_DATA(SSI0_SDATA_MARK, P1MSEL4_1, P1MSEL3_0, PJ6_FN),
+	PINMUX_DATA(SIOF_RXD_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ5_FN),
+	PINMUX_DATA(HAC0_SDIN_MARK, P1MSEL4_0, P1MSEL3_1, PJ5_FN),
+	PINMUX_DATA(SSI0_SCK_MARK, P1MSEL4_1, P1MSEL3_0, PJ5_FN),
+	PINMUX_DATA(SIOF_SYNC_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ4_FN),
+	PINMUX_DATA(HAC0_SYNC_MARK, P1MSEL4_0, P1MSEL3_1, PJ4_FN),
+	PINMUX_DATA(SSI0_WS_MARK, P1MSEL4_1, P1MSEL3_0, PJ4_FN),
+	PINMUX_DATA(SIOF_MCLK_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ3_FN),
+	PINMUX_DATA(HAC_RES_MARK, P1MSEL4_0, P1MSEL3_1, PJ3_FN),
+	PINMUX_DATA(SIOF_SCK_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ2_FN),
+	PINMUX_DATA(HAC0_BITCLK_MARK, P1MSEL4_0, P1MSEL3_1, PJ2_FN),
+	PINMUX_DATA(SSI0_CLK_MARK, P1MSEL4_1, P1MSEL3_0, PJ2_FN),
+	PINMUX_DATA(HAC1_BITCLK_MARK, P1MSEL2_0, PJ1_FN),
+	PINMUX_DATA(SSI1_CLK_MARK, P1MSEL2_1, P1MSEL1_0, PJ1_FN),
+	PINMUX_DATA(TCLK_MARK, P1MSEL9_0, PJ0_FN),
+	PINMUX_DATA(IOIS16_MARK, P1MSEL9_1, PJ0_FN),
+
+	/* PK FN */
+	PINMUX_DATA(STATUS0_MARK, P1MSEL15_0, PK7_FN),
+	PINMUX_DATA(DRAK0_PK3_MARK, P1MSEL15_1, PK7_FN),
+	PINMUX_DATA(STATUS1_MARK, P1MSEL15_0, PK6_FN),
+	PINMUX_DATA(DRAK1_PK2_MARK, P1MSEL15_1, PK6_FN),
+	PINMUX_DATA(DACK2_MARK, P1MSEL12_0, P1MSEL11_0, PK5_FN),
+	PINMUX_DATA(SCIF2_TXD_MARK, P1MSEL12_1, P1MSEL11_0, PK5_FN),
+	PINMUX_DATA(MMCCMD_MARK, P1MSEL12_1, P1MSEL11_1, PK5_FN),
+	PINMUX_DATA(SIOF_TXD_PK_MARK, P2MSEL1_1,
+		    P1MSEL12_0, P1MSEL11_1, PK5_FN),
+	PINMUX_DATA(DACK3_MARK, P1MSEL12_0, P1MSEL11_0, PK4_FN),
+	PINMUX_DATA(SCIF2_SCK_MARK, P1MSEL12_1, P1MSEL11_0, PK4_FN),
+	PINMUX_DATA(MMCDAT_MARK, P1MSEL12_1, P1MSEL11_1, PK4_FN),
+	PINMUX_DATA(SIOF_SCK_PK_MARK, P2MSEL1_1,
+		    P1MSEL12_0, P1MSEL11_1, PK4_FN),
+	PINMUX_DATA(DREQ0_MARK, PK3_FN),
+	PINMUX_DATA(DREQ1_MARK, PK2_FN),
+	PINMUX_DATA(DRAK0_PK1_MARK, PK1_FN),
+	PINMUX_DATA(DRAK1_PK0_MARK, PK0_FN),
+
+	/* PL FN */
+	PINMUX_DATA(DREQ2_MARK, P1MSEL13_0, PL7_FN),
+	PINMUX_DATA(INTB_MARK, P1MSEL13_1, PL7_FN),
+	PINMUX_DATA(DREQ3_MARK, P1MSEL13_0, PL6_FN),
+	PINMUX_DATA(INTC_MARK, P1MSEL13_1, PL6_FN),
+	PINMUX_DATA(DRAK2_MARK, P1MSEL10_0, PL5_FN),
+	PINMUX_DATA(CE2A_MARK, P1MSEL10_1, PL5_FN),
+	PINMUX_DATA(IRL4_MARK, P1MSEL14_0, PL4_FN),
+	PINMUX_DATA(FD4_MARK, P1MSEL14_1, PL4_FN),
+	PINMUX_DATA(IRL5_MARK, P1MSEL14_0, PL3_FN),
+	PINMUX_DATA(FD5_MARK, P1MSEL14_1, PL3_FN),
+	PINMUX_DATA(IRL6_MARK, P1MSEL14_0, PL2_FN),
+	PINMUX_DATA(FD6_MARK, P1MSEL14_1, PL2_FN),
+	PINMUX_DATA(IRL7_MARK, P1MSEL14_0, PL1_FN),
+	PINMUX_DATA(FD7_MARK, P1MSEL14_1, PL1_FN),
+	PINMUX_DATA(DRAK3_MARK, P1MSEL10_0, PL0_FN),
+	PINMUX_DATA(CE2B_MARK, P1MSEL10_1, PL0_FN),
+
+	/* PM FN */
+	PINMUX_DATA(BREQ_BSACK_MARK, PM1_FN),
+	PINMUX_DATA(BACK_BSREQ_MARK, PM0_FN),
+
+	/* PN FN */
+	PINMUX_DATA(SCIF5_RXD_MARK, P1MSEL2_0, P1MSEL1_0, PN7_FN),
+	PINMUX_DATA(HAC1_SDIN_MARK, P1MSEL2_0, P1MSEL1_1, PN7_FN),
+	PINMUX_DATA(SSI1_SCK_MARK, P1MSEL2_1, P1MSEL1_0, PN7_FN),
+	PINMUX_DATA(SCIF5_SCK_MARK, P1MSEL2_0, P1MSEL1_0, PN6_FN),
+	PINMUX_DATA(HAC1_SDOUT_MARK, P1MSEL2_0, P1MSEL1_1, PN6_FN),
+	PINMUX_DATA(SSI1_SDATA_MARK, P1MSEL2_1, P1MSEL1_0, PN6_FN),
+	PINMUX_DATA(SCIF3_TXD_MARK, P1MSEL0_0, PN5_FN),
+	PINMUX_DATA(FCLE_MARK, P1MSEL0_1, PN5_FN),
+	PINMUX_DATA(SCIF3_RXD_MARK, P1MSEL0_0, PN4_FN),
+	PINMUX_DATA(FALE_MARK, P1MSEL0_1, PN4_FN),
+	PINMUX_DATA(SCIF3_SCK_MARK, P1MSEL0_0, PN3_FN),
+	PINMUX_DATA(FD0_MARK, P1MSEL0_1, PN3_FN),
+	PINMUX_DATA(SCIF4_TXD_MARK, P1MSEL0_0, PN2_FN),
+	PINMUX_DATA(FD1_MARK, P1MSEL0_1, PN2_FN),
+	PINMUX_DATA(SCIF4_RXD_MARK, P1MSEL0_0, PN1_FN),
+	PINMUX_DATA(FD2_MARK, P1MSEL0_1, PN1_FN),
+	PINMUX_DATA(SCIF4_SCK_MARK, P1MSEL0_0, PN0_FN),
+	PINMUX_DATA(FD3_MARK, P1MSEL0_1, PN0_FN),
+
+	/* PP FN */
+	PINMUX_DATA(DEVSEL_DCLKOUT_MARK, PP5_FN),
+	PINMUX_DATA(STOP_CDE_MARK, PP4_FN),
+	PINMUX_DATA(LOCK_ODDF_MARK, PP3_FN),
+	PINMUX_DATA(TRDY_DISPL_MARK, PP2_FN),
+	PINMUX_DATA(IRDY_HSYNC_MARK, PP1_FN),
+	PINMUX_DATA(PCIFRAME_VSYNC_MARK, PP0_FN),
+
+	/* PQ FN */
+	PINMUX_DATA(INTA_MARK, PQ4_FN),
+	PINMUX_DATA(GNT0_GNTIN_MARK, PQ3_FN),
+	PINMUX_DATA(REQ0_REQOUT_MARK, PQ2_FN),
+	PINMUX_DATA(PERR_MARK, PQ1_FN),
+	PINMUX_DATA(SERR_MARK, PQ0_FN),
+
+	/* PR FN */
+	PINMUX_DATA(WE7_CBE3_MARK, PR3_FN),
+	PINMUX_DATA(WE6_CBE2_MARK, PR2_FN),
+	PINMUX_DATA(WE5_CBE1_MARK, PR1_FN),
+	PINMUX_DATA(WE4_CBE0_MARK, PR0_FN),
+
+	/* MISC FN */
+	PINMUX_DATA(SCIF2_RXD_MARK, P1MSEL6_0, P1MSEL5_0),
+	PINMUX_DATA(SIOF_RXD_MARK, P2MSEL1_1, P1MSEL6_1, P1MSEL5_0),
+	PINMUX_DATA(MRESETOUT_MARK, P2MSEL2_0),
+	PINMUX_DATA(IRQOUT_MARK, P2MSEL2_1),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	/* PA */
+	PINMUX_GPIO(GPIO_PA7, PA7_DATA),
+	PINMUX_GPIO(GPIO_PA6, PA6_DATA),
+	PINMUX_GPIO(GPIO_PA5, PA5_DATA),
+	PINMUX_GPIO(GPIO_PA4, PA4_DATA),
+	PINMUX_GPIO(GPIO_PA3, PA3_DATA),
+	PINMUX_GPIO(GPIO_PA2, PA2_DATA),
+	PINMUX_GPIO(GPIO_PA1, PA1_DATA),
+	PINMUX_GPIO(GPIO_PA0, PA0_DATA),
+
+	/* PB */
+	PINMUX_GPIO(GPIO_PB7, PB7_DATA),
+	PINMUX_GPIO(GPIO_PB6, PB6_DATA),
+	PINMUX_GPIO(GPIO_PB5, PB5_DATA),
+	PINMUX_GPIO(GPIO_PB4, PB4_DATA),
+	PINMUX_GPIO(GPIO_PB3, PB3_DATA),
+	PINMUX_GPIO(GPIO_PB2, PB2_DATA),
+	PINMUX_GPIO(GPIO_PB1, PB1_DATA),
+	PINMUX_GPIO(GPIO_PB0, PB0_DATA),
+
+	/* PC */
+	PINMUX_GPIO(GPIO_PC7, PC7_DATA),
+	PINMUX_GPIO(GPIO_PC6, PC6_DATA),
+	PINMUX_GPIO(GPIO_PC5, PC5_DATA),
+	PINMUX_GPIO(GPIO_PC4, PC4_DATA),
+	PINMUX_GPIO(GPIO_PC3, PC3_DATA),
+	PINMUX_GPIO(GPIO_PC2, PC2_DATA),
+	PINMUX_GPIO(GPIO_PC1, PC1_DATA),
+	PINMUX_GPIO(GPIO_PC0, PC0_DATA),
+
+	/* PD */
+	PINMUX_GPIO(GPIO_PD7, PD7_DATA),
+	PINMUX_GPIO(GPIO_PD6, PD6_DATA),
+	PINMUX_GPIO(GPIO_PD5, PD5_DATA),
+	PINMUX_GPIO(GPIO_PD4, PD4_DATA),
+	PINMUX_GPIO(GPIO_PD3, PD3_DATA),
+	PINMUX_GPIO(GPIO_PD2, PD2_DATA),
+	PINMUX_GPIO(GPIO_PD1, PD1_DATA),
+	PINMUX_GPIO(GPIO_PD0, PD0_DATA),
+
+	/* PE */
+	PINMUX_GPIO(GPIO_PE5, PE5_DATA),
+	PINMUX_GPIO(GPIO_PE4, PE4_DATA),
+	PINMUX_GPIO(GPIO_PE3, PE3_DATA),
+	PINMUX_GPIO(GPIO_PE2, PE2_DATA),
+	PINMUX_GPIO(GPIO_PE1, PE1_DATA),
+	PINMUX_GPIO(GPIO_PE0, PE0_DATA),
+
+	/* PF */
+	PINMUX_GPIO(GPIO_PF7, PF7_DATA),
+	PINMUX_GPIO(GPIO_PF6, PF6_DATA),
+	PINMUX_GPIO(GPIO_PF5, PF5_DATA),
+	PINMUX_GPIO(GPIO_PF4, PF4_DATA),
+	PINMUX_GPIO(GPIO_PF3, PF3_DATA),
+	PINMUX_GPIO(GPIO_PF2, PF2_DATA),
+	PINMUX_GPIO(GPIO_PF1, PF1_DATA),
+	PINMUX_GPIO(GPIO_PF0, PF0_DATA),
+
+	/* PG */
+	PINMUX_GPIO(GPIO_PG7, PG7_DATA),
+	PINMUX_GPIO(GPIO_PG6, PG6_DATA),
+	PINMUX_GPIO(GPIO_PG5, PG5_DATA),
+	PINMUX_GPIO(GPIO_PG4, PG4_DATA),
+	PINMUX_GPIO(GPIO_PG3, PG3_DATA),
+	PINMUX_GPIO(GPIO_PG2, PG2_DATA),
+	PINMUX_GPIO(GPIO_PG1, PG1_DATA),
+	PINMUX_GPIO(GPIO_PG0, PG0_DATA),
+
+	/* PH */
+	PINMUX_GPIO(GPIO_PH7, PH7_DATA),
+	PINMUX_GPIO(GPIO_PH6, PH6_DATA),
+	PINMUX_GPIO(GPIO_PH5, PH5_DATA),
+	PINMUX_GPIO(GPIO_PH4, PH4_DATA),
+	PINMUX_GPIO(GPIO_PH3, PH3_DATA),
+	PINMUX_GPIO(GPIO_PH2, PH2_DATA),
+	PINMUX_GPIO(GPIO_PH1, PH1_DATA),
+	PINMUX_GPIO(GPIO_PH0, PH0_DATA),
+
+	/* PJ */
+	PINMUX_GPIO(GPIO_PJ7, PJ7_DATA),
+	PINMUX_GPIO(GPIO_PJ6, PJ6_DATA),
+	PINMUX_GPIO(GPIO_PJ5, PJ5_DATA),
+	PINMUX_GPIO(GPIO_PJ4, PJ4_DATA),
+	PINMUX_GPIO(GPIO_PJ3, PJ3_DATA),
+	PINMUX_GPIO(GPIO_PJ2, PJ2_DATA),
+	PINMUX_GPIO(GPIO_PJ1, PJ1_DATA),
+	PINMUX_GPIO(GPIO_PJ0, PJ0_DATA),
+
+	/* PK */
+	PINMUX_GPIO(GPIO_PK7, PK7_DATA),
+	PINMUX_GPIO(GPIO_PK6, PK6_DATA),
+	PINMUX_GPIO(GPIO_PK5, PK5_DATA),
+	PINMUX_GPIO(GPIO_PK4, PK4_DATA),
+	PINMUX_GPIO(GPIO_PK3, PK3_DATA),
+	PINMUX_GPIO(GPIO_PK2, PK2_DATA),
+	PINMUX_GPIO(GPIO_PK1, PK1_DATA),
+	PINMUX_GPIO(GPIO_PK0, PK0_DATA),
+
+	/* PL */
+	PINMUX_GPIO(GPIO_PL7, PL7_DATA),
+	PINMUX_GPIO(GPIO_PL6, PL6_DATA),
+	PINMUX_GPIO(GPIO_PL5, PL5_DATA),
+	PINMUX_GPIO(GPIO_PL4, PL4_DATA),
+	PINMUX_GPIO(GPIO_PL3, PL3_DATA),
+	PINMUX_GPIO(GPIO_PL2, PL2_DATA),
+	PINMUX_GPIO(GPIO_PL1, PL1_DATA),
+	PINMUX_GPIO(GPIO_PL0, PL0_DATA),
+
+	/* PM */
+	PINMUX_GPIO(GPIO_PM1, PM1_DATA),
+	PINMUX_GPIO(GPIO_PM0, PM0_DATA),
+
+	/* PN */
+	PINMUX_GPIO(GPIO_PN7, PN7_DATA),
+	PINMUX_GPIO(GPIO_PN6, PN6_DATA),
+	PINMUX_GPIO(GPIO_PN5, PN5_DATA),
+	PINMUX_GPIO(GPIO_PN4, PN4_DATA),
+	PINMUX_GPIO(GPIO_PN3, PN3_DATA),
+	PINMUX_GPIO(GPIO_PN2, PN2_DATA),
+	PINMUX_GPIO(GPIO_PN1, PN1_DATA),
+	PINMUX_GPIO(GPIO_PN0, PN0_DATA),
+
+	/* PP */
+	PINMUX_GPIO(GPIO_PP5, PP5_DATA),
+	PINMUX_GPIO(GPIO_PP4, PP4_DATA),
+	PINMUX_GPIO(GPIO_PP3, PP3_DATA),
+	PINMUX_GPIO(GPIO_PP2, PP2_DATA),
+	PINMUX_GPIO(GPIO_PP1, PP1_DATA),
+	PINMUX_GPIO(GPIO_PP0, PP0_DATA),
+
+	/* PQ */
+	PINMUX_GPIO(GPIO_PQ4, PQ4_DATA),
+	PINMUX_GPIO(GPIO_PQ3, PQ3_DATA),
+	PINMUX_GPIO(GPIO_PQ2, PQ2_DATA),
+	PINMUX_GPIO(GPIO_PQ1, PQ1_DATA),
+	PINMUX_GPIO(GPIO_PQ0, PQ0_DATA),
+
+	/* PR */
+	PINMUX_GPIO(GPIO_PR3, PR3_DATA),
+	PINMUX_GPIO(GPIO_PR2, PR2_DATA),
+	PINMUX_GPIO(GPIO_PR1, PR1_DATA),
+	PINMUX_GPIO(GPIO_PR0, PR0_DATA),
+
+	/* FN */
+	PINMUX_GPIO(GPIO_FN_D63_AD31, D63_AD31_MARK),
+	PINMUX_GPIO(GPIO_FN_D62_AD30, D62_AD30_MARK),
+	PINMUX_GPIO(GPIO_FN_D61_AD29, D61_AD29_MARK),
+	PINMUX_GPIO(GPIO_FN_D60_AD28, D60_AD28_MARK),
+	PINMUX_GPIO(GPIO_FN_D59_AD27, D59_AD27_MARK),
+	PINMUX_GPIO(GPIO_FN_D58_AD26, D58_AD26_MARK),
+	PINMUX_GPIO(GPIO_FN_D57_AD25, D57_AD25_MARK),
+	PINMUX_GPIO(GPIO_FN_D56_AD24, D56_AD24_MARK),
+	PINMUX_GPIO(GPIO_FN_D55_AD23, D55_AD23_MARK),
+	PINMUX_GPIO(GPIO_FN_D54_AD22, D54_AD22_MARK),
+	PINMUX_GPIO(GPIO_FN_D53_AD21, D53_AD21_MARK),
+	PINMUX_GPIO(GPIO_FN_D52_AD20, D52_AD20_MARK),
+	PINMUX_GPIO(GPIO_FN_D51_AD19, D51_AD19_MARK),
+	PINMUX_GPIO(GPIO_FN_D50_AD18, D50_AD18_MARK),
+	PINMUX_GPIO(GPIO_FN_D49_AD17_DB5, D49_AD17_DB5_MARK),
+	PINMUX_GPIO(GPIO_FN_D48_AD16_DB4, D48_AD16_DB4_MARK),
+	PINMUX_GPIO(GPIO_FN_D47_AD15_DB3, D47_AD15_DB3_MARK),
+	PINMUX_GPIO(GPIO_FN_D46_AD14_DB2, D46_AD14_DB2_MARK),
+	PINMUX_GPIO(GPIO_FN_D45_AD13_DB1, D45_AD13_DB1_MARK),
+	PINMUX_GPIO(GPIO_FN_D44_AD12_DB0, D44_AD12_DB0_MARK),
+	PINMUX_GPIO(GPIO_FN_D43_AD11_DG5, D43_AD11_DG5_MARK),
+	PINMUX_GPIO(GPIO_FN_D42_AD10_DG4, D42_AD10_DG4_MARK),
+	PINMUX_GPIO(GPIO_FN_D41_AD9_DG3, D41_AD9_DG3_MARK),
+	PINMUX_GPIO(GPIO_FN_D40_AD8_DG2, D40_AD8_DG2_MARK),
+	PINMUX_GPIO(GPIO_FN_D39_AD7_DG1, D39_AD7_DG1_MARK),
+	PINMUX_GPIO(GPIO_FN_D38_AD6_DG0, D38_AD6_DG0_MARK),
+	PINMUX_GPIO(GPIO_FN_D37_AD5_DR5, D37_AD5_DR5_MARK),
+	PINMUX_GPIO(GPIO_FN_D36_AD4_DR4, D36_AD4_DR4_MARK),
+	PINMUX_GPIO(GPIO_FN_D35_AD3_DR3, D35_AD3_DR3_MARK),
+	PINMUX_GPIO(GPIO_FN_D34_AD2_DR2, D34_AD2_DR2_MARK),
+	PINMUX_GPIO(GPIO_FN_D33_AD1_DR1, D33_AD1_DR1_MARK),
+	PINMUX_GPIO(GPIO_FN_D32_AD0_DR0, D32_AD0_DR0_MARK),
+	PINMUX_GPIO(GPIO_FN_REQ1, REQ1_MARK),
+	PINMUX_GPIO(GPIO_FN_REQ2, REQ2_MARK),
+	PINMUX_GPIO(GPIO_FN_REQ3, REQ3_MARK),
+	PINMUX_GPIO(GPIO_FN_GNT1, GNT1_MARK),
+	PINMUX_GPIO(GPIO_FN_GNT2, GNT2_MARK),
+	PINMUX_GPIO(GPIO_FN_GNT3, GNT3_MARK),
+	PINMUX_GPIO(GPIO_FN_MMCCLK, MMCCLK_MARK),
+	PINMUX_GPIO(GPIO_FN_D31, D31_MARK),
+	PINMUX_GPIO(GPIO_FN_D30, D30_MARK),
+	PINMUX_GPIO(GPIO_FN_D29, D29_MARK),
+	PINMUX_GPIO(GPIO_FN_D28, D28_MARK),
+	PINMUX_GPIO(GPIO_FN_D27, D27_MARK),
+	PINMUX_GPIO(GPIO_FN_D26, D26_MARK),
+	PINMUX_GPIO(GPIO_FN_D25, D25_MARK),
+	PINMUX_GPIO(GPIO_FN_D24, D24_MARK),
+	PINMUX_GPIO(GPIO_FN_D23, D23_MARK),
+	PINMUX_GPIO(GPIO_FN_D22, D22_MARK),
+	PINMUX_GPIO(GPIO_FN_D21, D21_MARK),
+	PINMUX_GPIO(GPIO_FN_D20, D20_MARK),
+	PINMUX_GPIO(GPIO_FN_D19, D19_MARK),
+	PINMUX_GPIO(GPIO_FN_D18, D18_MARK),
+	PINMUX_GPIO(GPIO_FN_D17, D17_MARK),
+	PINMUX_GPIO(GPIO_FN_D16, D16_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_SCK, SCIF1_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_RXD, SCIF1_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_TXD, SCIF1_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_CTS, SCIF0_CTS_MARK),
+	PINMUX_GPIO(GPIO_FN_INTD, INTD_MARK),
+	PINMUX_GPIO(GPIO_FN_FCE, FCE_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_RTS, SCIF0_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_HSPI_CS, HSPI_CS_MARK),
+	PINMUX_GPIO(GPIO_FN_FSE, FSE_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_SCK, SCIF0_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_HSPI_CLK, HSPI_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_FRE, FRE_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_RXD, SCIF0_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_HSPI_RX, HSPI_RX_MARK),
+	PINMUX_GPIO(GPIO_FN_FRB, FRB_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_TXD, SCIF0_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_HSPI_TX, HSPI_TX_MARK),
+	PINMUX_GPIO(GPIO_FN_FWE, FWE_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF5_TXD, SCIF5_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC1_SYNC, HAC1_SYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI1_WS, SSI1_WS_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF_TXD_PJ, SIOF_TXD_PJ_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC0_SDOUT, HAC0_SDOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI0_SDATA, SSI0_SDATA_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF_RXD_PJ, SIOF_RXD_PJ_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC0_SDIN, HAC0_SDIN_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI0_SCK, SSI0_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF_SYNC_PJ, SIOF_SYNC_PJ_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC0_SYNC, HAC0_SYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI0_WS, SSI0_WS_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF_MCLK_PJ, SIOF_MCLK_PJ_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC_RES, HAC_RES_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF_SCK_PJ, SIOF_SCK_PJ_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC0_BITCLK, HAC0_BITCLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI0_CLK, SSI0_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC1_BITCLK, HAC1_BITCLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI1_CLK, SSI1_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_TCLK, TCLK_MARK),
+	PINMUX_GPIO(GPIO_FN_IOIS16, IOIS16_MARK),
+	PINMUX_GPIO(GPIO_FN_STATUS0, STATUS0_MARK),
+	PINMUX_GPIO(GPIO_FN_DRAK0_PK3, DRAK0_PK3_MARK),
+	PINMUX_GPIO(GPIO_FN_STATUS1, STATUS1_MARK),
+	PINMUX_GPIO(GPIO_FN_DRAK1_PK2, DRAK1_PK2_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK2, DACK2_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_TXD, SCIF2_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_MMCCMD, MMCCMD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF_TXD_PK, SIOF_TXD_PK_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK3, DACK3_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_SCK, SCIF2_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_MMCDAT, MMCDAT_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF_SCK_PK, SIOF_SCK_PK_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ0, DREQ0_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ1, DREQ1_MARK),
+	PINMUX_GPIO(GPIO_FN_DRAK0_PK1, DRAK0_PK1_MARK),
+	PINMUX_GPIO(GPIO_FN_DRAK1_PK0, DRAK1_PK0_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ2, DREQ2_MARK),
+	PINMUX_GPIO(GPIO_FN_INTB, INTB_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ3, DREQ3_MARK),
+	PINMUX_GPIO(GPIO_FN_INTC, INTC_MARK),
+	PINMUX_GPIO(GPIO_FN_DRAK2, DRAK2_MARK),
+	PINMUX_GPIO(GPIO_FN_CE2A, CE2A_MARK),
+	PINMUX_GPIO(GPIO_FN_IRL4, IRL4_MARK),
+	PINMUX_GPIO(GPIO_FN_FD4, FD4_MARK),
+	PINMUX_GPIO(GPIO_FN_IRL5, IRL5_MARK),
+	PINMUX_GPIO(GPIO_FN_FD5, FD5_MARK),
+	PINMUX_GPIO(GPIO_FN_IRL6, IRL6_MARK),
+	PINMUX_GPIO(GPIO_FN_FD6, FD6_MARK),
+	PINMUX_GPIO(GPIO_FN_IRL7, IRL7_MARK),
+	PINMUX_GPIO(GPIO_FN_FD7, FD7_MARK),
+	PINMUX_GPIO(GPIO_FN_DRAK3, DRAK3_MARK),
+	PINMUX_GPIO(GPIO_FN_CE2B, CE2B_MARK),
+	PINMUX_GPIO(GPIO_FN_BREQ_BSACK, BREQ_BSACK_MARK),
+	PINMUX_GPIO(GPIO_FN_BACK_BSREQ, BACK_BSREQ_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF5_RXD, SCIF5_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC1_SDIN, HAC1_SDIN_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI1_SCK, SSI1_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF5_SCK, SCIF5_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC1_SDOUT, HAC1_SDOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI1_SDATA, SSI1_SDATA_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_TXD, SCIF3_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_FCLE, FCLE_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_RXD, SCIF3_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_FALE, FALE_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_SCK, SCIF3_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_FD0, FD0_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF4_TXD, SCIF4_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_FD1, FD1_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF4_RXD, SCIF4_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_FD2, FD2_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF4_SCK, SCIF4_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_FD3, FD3_MARK),
+	PINMUX_GPIO(GPIO_FN_DEVSEL_DCLKOUT, DEVSEL_DCLKOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_STOP_CDE, STOP_CDE_MARK),
+	PINMUX_GPIO(GPIO_FN_LOCK_ODDF, LOCK_ODDF_MARK),
+	PINMUX_GPIO(GPIO_FN_TRDY_DISPL, TRDY_DISPL_MARK),
+	PINMUX_GPIO(GPIO_FN_IRDY_HSYNC, IRDY_HSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_PCIFRAME_VSYNC, PCIFRAME_VSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_INTA, INTA_MARK),
+	PINMUX_GPIO(GPIO_FN_GNT0_GNTIN, GNT0_GNTIN_MARK),
+	PINMUX_GPIO(GPIO_FN_REQ0_REQOUT, REQ0_REQOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_PERR, PERR_MARK),
+	PINMUX_GPIO(GPIO_FN_SERR, SERR_MARK),
+	PINMUX_GPIO(GPIO_FN_WE7_CBE3, WE7_CBE3_MARK),
+	PINMUX_GPIO(GPIO_FN_WE6_CBE2, WE6_CBE2_MARK),
+	PINMUX_GPIO(GPIO_FN_WE5_CBE1, WE5_CBE1_MARK),
+	PINMUX_GPIO(GPIO_FN_WE4_CBE0, WE4_CBE0_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF2_RXD, SCIF2_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SIOF_RXD, SIOF_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_MRESETOUT, MRESETOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQOUT, IRQOUT_MARK),
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	{ PINMUX_CFG_REG("PACR", 0xffe70000, 16, 2) {
+		PA7_FN, PA7_OUT, PA7_IN, PA7_IN_PU,
+		PA6_FN, PA6_OUT, PA6_IN, PA6_IN_PU,
+		PA5_FN, PA5_OUT, PA5_IN, PA5_IN_PU,
+		PA4_FN, PA4_OUT, PA4_IN, PA4_IN_PU,
+		PA3_FN, PA3_OUT, PA3_IN, PA3_IN_PU,
+		PA2_FN, PA2_OUT, PA2_IN, PA2_IN_PU,
+		PA1_FN, PA1_OUT, PA1_IN, PA1_IN_PU,
+		PA0_FN, PA0_OUT, PA0_IN, PA0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PBCR", 0xffe70002, 16, 2) {
+		PB7_FN, PB7_OUT, PB7_IN, PB7_IN_PU,
+		PB6_FN, PB6_OUT, PB6_IN, PB6_IN_PU,
+		PB5_FN, PB5_OUT, PB5_IN, PB5_IN_PU,
+		PB4_FN, PB4_OUT, PB4_IN, PB4_IN_PU,
+		PB3_FN, PB3_OUT, PB3_IN, PB3_IN_PU,
+		PB2_FN, PB2_OUT, PB2_IN, PB2_IN_PU,
+		PB1_FN, PB1_OUT, PB1_IN, PB1_IN_PU,
+		PB0_FN, PB0_OUT, PB0_IN, PB0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PCCR", 0xffe70004, 16, 2) {
+		PC7_FN, PC7_OUT, PC7_IN, PC7_IN_PU,
+		PC6_FN, PC6_OUT, PC6_IN, PC6_IN_PU,
+		PC5_FN, PC5_OUT, PC5_IN, PC5_IN_PU,
+		PC4_FN, PC4_OUT, PC4_IN, PC4_IN_PU,
+		PC3_FN, PC3_OUT, PC3_IN, PC3_IN_PU,
+		PC2_FN, PC2_OUT, PC2_IN, PC2_IN_PU,
+		PC1_FN, PC1_OUT, PC1_IN, PC1_IN_PU,
+		PC0_FN, PC0_OUT, PC0_IN, PC0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PDCR", 0xffe70006, 16, 2) {
+		PD7_FN, PD7_OUT, PD7_IN, PD7_IN_PU,
+		PD6_FN, PD6_OUT, PD6_IN, PD6_IN_PU,
+		PD5_FN, PD5_OUT, PD5_IN, PD5_IN_PU,
+		PD4_FN, PD4_OUT, PD4_IN, PD4_IN_PU,
+		PD3_FN, PD3_OUT, PD3_IN, PD3_IN_PU,
+		PD2_FN, PD2_OUT, PD2_IN, PD2_IN_PU,
+		PD1_FN, PD1_OUT, PD1_IN, PD1_IN_PU,
+		PD0_FN, PD0_OUT, PD0_IN, PD0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PECR", 0xffe70008, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PE5_FN, PE5_OUT, PE5_IN, PE5_IN_PU,
+		PE4_FN, PE4_OUT, PE4_IN, PE4_IN_PU,
+		PE3_FN, PE3_OUT, PE3_IN, PE3_IN_PU,
+		PE2_FN, PE2_OUT, PE2_IN, PE2_IN_PU,
+		PE1_FN, PE1_OUT, PE1_IN, PE1_IN_PU,
+		PE0_FN, PE0_OUT, PE0_IN, PE0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PFCR", 0xffe7000a, 16, 2) {
+		PF7_FN, PF7_OUT, PF7_IN, PF7_IN_PU,
+		PF6_FN, PF6_OUT, PF6_IN, PF6_IN_PU,
+		PF5_FN, PF5_OUT, PF5_IN, PF5_IN_PU,
+		PF4_FN, PF4_OUT, PF4_IN, PF4_IN_PU,
+		PF3_FN, PF3_OUT, PF3_IN, PF3_IN_PU,
+		PF2_FN, PF2_OUT, PF2_IN, PF2_IN_PU,
+		PF1_FN, PF1_OUT, PF1_IN, PF1_IN_PU,
+		PF0_FN, PF0_OUT, PF0_IN, PF0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PGCR", 0xffe7000c, 16, 2) {
+		PG7_FN, PG7_OUT, PG7_IN, PG7_IN_PU,
+		PG6_FN, PG6_OUT, PG6_IN, PG6_IN_PU,
+		PG5_FN, PG5_OUT, PG5_IN, PG5_IN_PU,
+		PG4_FN, PG4_OUT, PG4_IN, PG4_IN_PU,
+		PG3_FN, PG3_OUT, PG3_IN, PG3_IN_PU,
+		PG2_FN, PG2_OUT, PG2_IN, PG2_IN_PU,
+		PG1_FN, PG1_OUT, PG1_IN, PG1_IN_PU,
+		PG0_FN, PG0_OUT, PG0_IN, PG0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PHCR", 0xffe7000e, 16, 2) {
+		PH7_FN, PH7_OUT, PH7_IN, PH7_IN_PU,
+		PH6_FN, PH6_OUT, PH6_IN, PH6_IN_PU,
+		PH5_FN, PH5_OUT, PH5_IN, PH5_IN_PU,
+		PH4_FN, PH4_OUT, PH4_IN, PH4_IN_PU,
+		PH3_FN, PH3_OUT, PH3_IN, PH3_IN_PU,
+		PH2_FN, PH2_OUT, PH2_IN, PH2_IN_PU,
+		PH1_FN, PH1_OUT, PH1_IN, PH1_IN_PU,
+		PH0_FN, PH0_OUT, PH0_IN, PH0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PJCR", 0xffe70010, 16, 2) {
+		PJ7_FN, PJ7_OUT, PJ7_IN, PJ7_IN_PU,
+		PJ6_FN, PJ6_OUT, PJ6_IN, PJ6_IN_PU,
+		PJ5_FN, PJ5_OUT, PJ5_IN, PJ5_IN_PU,
+		PJ4_FN, PJ4_OUT, PJ4_IN, PJ4_IN_PU,
+		PJ3_FN, PJ3_OUT, PJ3_IN, PJ3_IN_PU,
+		PJ2_FN, PJ2_OUT, PJ2_IN, PJ2_IN_PU,
+		PJ1_FN, PJ1_OUT, PJ1_IN, PJ1_IN_PU,
+		PJ0_FN, PJ0_OUT, PJ0_IN, PJ0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PKCR", 0xffe70012, 16, 2) {
+		PK7_FN, PK7_OUT, PK7_IN, PK7_IN_PU,
+		PK6_FN, PK6_OUT, PK6_IN, PK6_IN_PU,
+		PK5_FN, PK5_OUT, PK5_IN, PK5_IN_PU,
+		PK4_FN, PK4_OUT, PK4_IN, PK4_IN_PU,
+		PK3_FN, PK3_OUT, PK3_IN, PK3_IN_PU,
+		PK2_FN, PK2_OUT, PK2_IN, PK2_IN_PU,
+		PK1_FN, PK1_OUT, PK1_IN, PK1_IN_PU,
+		PK0_FN, PK0_OUT, PK0_IN, PK0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PLCR", 0xffe70014, 16, 2) {
+		PL7_FN, PL7_OUT, PL7_IN, PL7_IN_PU,
+		PL6_FN, PL6_OUT, PL6_IN, PL6_IN_PU,
+		PL5_FN, PL5_OUT, PL5_IN, PL5_IN_PU,
+		PL4_FN, PL4_OUT, PL4_IN, PL4_IN_PU,
+		PL3_FN, PL3_OUT, PL3_IN, PL3_IN_PU,
+		PL2_FN, PL2_OUT, PL2_IN, PL2_IN_PU,
+		PL1_FN, PL1_OUT, PL1_IN, PL1_IN_PU,
+		PL0_FN, PL0_OUT, PL0_IN, PL0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PMCR", 0xffe70016, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PM1_FN, PM1_OUT, PM1_IN, PM1_IN_PU,
+		PM0_FN, PM0_OUT, PM0_IN, PM0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PNCR", 0xffe70018, 16, 2) {
+		PN7_FN, PN7_OUT, PN7_IN, PN7_IN_PU,
+		PN6_FN, PN6_OUT, PN6_IN, PN6_IN_PU,
+		PN5_FN, PN5_OUT, PN5_IN, PN5_IN_PU,
+		PN4_FN, PN4_OUT, PN4_IN, PN4_IN_PU,
+		PN3_FN, PN3_OUT, PN3_IN, PN3_IN_PU,
+		PN2_FN, PN2_OUT, PN2_IN, PN2_IN_PU,
+		PN1_FN, PN1_OUT, PN1_IN, PN1_IN_PU,
+		PN0_FN, PN0_OUT, PN0_IN, PN0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PPCR", 0xffe7001a, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PP5_FN, PP5_OUT, PP5_IN, PP5_IN_PU,
+		PP4_FN, PP4_OUT, PP4_IN, PP4_IN_PU,
+		PP3_FN, PP3_OUT, PP3_IN, PP3_IN_PU,
+		PP2_FN, PP2_OUT, PP2_IN, PP2_IN_PU,
+		PP1_FN, PP1_OUT, PP1_IN, PP1_IN_PU,
+		PP0_FN, PP0_OUT, PP0_IN, PP0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PQCR", 0xffe7001c, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PQ4_FN, PQ4_OUT, PQ4_IN, PQ4_IN_PU,
+		PQ3_FN, PQ3_OUT, PQ3_IN, PQ3_IN_PU,
+		PQ2_FN, PQ2_OUT, PQ2_IN, PQ2_IN_PU,
+		PQ1_FN, PQ1_OUT, PQ1_IN, PQ1_IN_PU,
+		PQ0_FN, PQ0_OUT, PQ0_IN, PQ0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PRCR", 0xffe7001e, 16, 2) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		PR3_FN, PR3_OUT, PR3_IN, PR3_IN_PU,
+		PR2_FN, PR2_OUT, PR2_IN, PR2_IN_PU,
+		PR1_FN, PR1_OUT, PR1_IN, PR1_IN_PU,
+		PR0_FN, PR0_OUT, PR0_IN, PR0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("P1MSELR", 0xffe70080, 16, 1) {
+		P1MSEL15_0, P1MSEL15_1,
+		P1MSEL14_0, P1MSEL14_1,
+		P1MSEL13_0, P1MSEL13_1,
+		P1MSEL12_0, P1MSEL12_1,
+		P1MSEL11_0, P1MSEL11_1,
+		P1MSEL10_0, P1MSEL10_1,
+		P1MSEL9_0, P1MSEL9_1,
+		P1MSEL8_0, P1MSEL8_1,
+		P1MSEL7_0, P1MSEL7_1,
+		P1MSEL6_0, P1MSEL6_1,
+		P1MSEL5_0, 0,
+		P1MSEL4_0, P1MSEL4_1,
+		P1MSEL3_0, P1MSEL3_1,
+		P1MSEL2_0, P1MSEL2_1,
+		P1MSEL1_0, P1MSEL1_1,
+		P1MSEL0_0, P1MSEL0_1 }
+	},
+	{ PINMUX_CFG_REG("P2MSELR", 0xffe70082, 16, 1) {
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		P2MSEL2_0, P2MSEL2_1,
+		P2MSEL1_0, P2MSEL1_1,
+		P2MSEL0_0, P2MSEL0_1 }
+	},
+	{}
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PADR", 0xffe70020, 8) {
+		PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
+		PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA }
+	},
+	{ PINMUX_DATA_REG("PBDR", 0xffe70022, 8) {
+		PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
+		PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA }
+	},
+	{ PINMUX_DATA_REG("PCDR", 0xffe70024, 8) {
+		PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
+		PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA }
+	},
+	{ PINMUX_DATA_REG("PDDR", 0xffe70026, 8) {
+		PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
+		PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA }
+	},
+	{ PINMUX_DATA_REG("PEDR", 0xffe70028, 8) {
+		0, 0, PE5_DATA, PE4_DATA,
+		PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA }
+	},
+	{ PINMUX_DATA_REG("PFDR", 0xffe7002a, 8) {
+		PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
+		PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA }
+	},
+	{ PINMUX_DATA_REG("PGDR", 0xffe7002c, 8) {
+		PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
+		PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA }
+	},
+	{ PINMUX_DATA_REG("PHDR", 0xffe7002e, 8) {
+		PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
+		PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA }
+	},
+	{ PINMUX_DATA_REG("PJDR", 0xffe70030, 8) {
+		PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
+		PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA }
+	},
+	{ PINMUX_DATA_REG("PKDR", 0xffe70032, 8) {
+		PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA,
+		PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA }
+	},
+	{ PINMUX_DATA_REG("PLDR", 0xffe70034, 8) {
+		PL7_DATA, PL6_DATA, PL5_DATA, PL4_DATA,
+		PL3_DATA, PL2_DATA, PL1_DATA, PL0_DATA }
+	},
+	{ PINMUX_DATA_REG("PMDR", 0xffe70036, 8) {
+		0, 0, 0, 0,
+		0, 0, PM1_DATA, PM0_DATA }
+	},
+	{ PINMUX_DATA_REG("PNDR", 0xffe70038, 8) {
+		PN7_DATA, PN6_DATA, PN5_DATA, PN4_DATA,
+		PN3_DATA, PN2_DATA, PN1_DATA, PN0_DATA }
+	},
+	{ PINMUX_DATA_REG("PPDR", 0xffe7003a, 8) {
+		0, 0, PP5_DATA, PP4_DATA,
+		PP3_DATA, PP2_DATA, PP1_DATA, PP0_DATA }
+	},
+	{ PINMUX_DATA_REG("PQDR", 0xffe7003c, 8) {
+		0, 0, 0, PQ4_DATA,
+		PQ3_DATA, PQ2_DATA, PQ1_DATA, PQ0_DATA }
+	},
+	{ PINMUX_DATA_REG("PRDR", 0xffe7003e, 8) {
+		0, 0, 0, 0,
+		PR3_DATA, PR2_DATA, PR1_DATA, PR0_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info sh7785_pinmux_info = {
+	.name = "sh7785_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PA7,
+	.last_gpio = GPIO_FN_IRQOUT,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return register_pinmux(&sh7785_pinmux_info);
+}
+
+arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/gpio.c b/arch/sh/kernel/gpio.c
index bb8b812..d371653 100644
--- a/arch/sh/kernel/gpio.c
+++ b/arch/sh/kernel/gpio.c
@@ -267,9 +267,13 @@
 			break;
 
 		in_range = enum_in_range(enum_id, &gpioc->function);
-		if (!in_range && range)
+		if (!in_range && range) {
 			in_range = enum_in_range(enum_id, range);
 
+			if (in_range && enum_id == range->force)
+				continue;
+		}
+
 		if (!in_range)
 			continue;
 
@@ -432,7 +436,7 @@
 		BUG();
 	else
 		value = read_write_reg(dr->reg, dr->reg_width,
-				       1, bit, value, do_write);
+				       1, bit, !!value, do_write);
 
 	return value;
 }
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index d917b7b..d366a74 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -126,7 +126,6 @@
 EXPORT_SYMBOL(flush_cache_all);
 EXPORT_SYMBOL(flush_cache_range);
 EXPORT_SYMBOL(flush_dcache_page);
-EXPORT_SYMBOL(__flush_purge_region);
 #endif
 
 #if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
@@ -147,3 +146,9 @@
 EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(_ebss);
 EXPORT_SYMBOL(empty_zero_page);
+
+#ifndef CONFIG_CACHE_OFF
+EXPORT_SYMBOL(__flush_purge_region);
+EXPORT_SYMBOL(__flush_wback_region);
+EXPORT_SYMBOL(__flush_invalidate_region);
+#endif
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 508dfb02..3c5ad16 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -18,6 +18,7 @@
 #include <linux/spinlock.h>
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/cpu.h>
 #include <linux/interrupt.h>
 #include <asm/atomic.h>
 #include <asm/processor.h>
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index b359b08..1e5c74e 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -105,6 +105,8 @@
 		dump_mem("Stack: ", regs->regs[15], THREAD_SIZE +
 			 (unsigned long)task_stack_page(current));
 
+	notify_die(DIE_OOPS, str, regs, err, 255, SIGSEGV);
+
 	bust_spinlocks(0);
 	add_taint(TAINT_DIE);
 	spin_unlock_irq(&die_lock);
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 2a53943..4abf000 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -321,21 +321,4 @@
 }
 EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
 #endif
-
-#ifdef CONFIG_MEMORY_HOTREMOVE
-int remove_memory(u64 start, u64 size)
-{
-	unsigned long start_pfn = start >> PAGE_SHIFT;
-	unsigned long end_pfn = start_pfn + (size >> PAGE_SHIFT);
-	int ret;
-
-	ret = offline_pages(start_pfn, end_pfn, 120 * HZ);
-	if (unlikely(ret))
-		printk("%s: Failed, offline_pages() == %d\n", __func__, ret);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(remove_memory);
-#endif
-
 #endif /* CONFIG_MEMORY_HOTPLUG */
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index 4dd1ba7..9c11582 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -31,7 +31,7 @@
 #define APC_DEVNAME "apc"
 
 static u8 __iomem *regs;
-static int apc_no_idle __initdata = 0;
+static int apc_no_idle __devinitdata = 0;
 
 #define apc_readb(offs)		(sbus_readb(regs+offs))
 #define apc_writeb(val, offs) 	(sbus_writeb(val, regs+offs))
diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S
index 2d325fd..2fe2c11 100644
--- a/arch/sparc/kernel/head.S
+++ b/arch/sparc/kernel/head.S
@@ -465,6 +465,7 @@
 		mov	%o7, %g4		! Save %o7
 
 		/* Jump to it, and pray... */
+		__INIT
 current_pc:
 		call	1f
 		 nop
diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c
index 9ab815b..17bb603 100644
--- a/arch/sparc/oprofile/init.c
+++ b/arch/sparc/oprofile/init.c
@@ -12,7 +12,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
  
-int __init oprofile_arch_init(struct oprofile_operations * ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
 	return -ENODEV;
 }
diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S
index 704a3af..83abd5a 100644
--- a/arch/sparc64/kernel/trampoline.S
+++ b/arch/sparc64/kernel/trampoline.S
@@ -328,6 +328,12 @@
 
 	wrpr		%g0, 0, %wstate
 
+	sethi		%hi(prom_entry_lock), %g2
+1:	ldstub		[%g2 + %lo(prom_entry_lock)], %g1
+	membar		#StoreLoad | #StoreStore
+	brnz,pn		%g1, 1b
+	 nop
+
 	/* As a hack, put &init_thread_union into %g6.
 	 * prom_world() loads from here to restore the %asi
 	 * register.
@@ -337,7 +343,7 @@
 
 	sethi		%hi(is_sun4v), %o0
 	lduw		[%o0 + %lo(is_sun4v)], %o0
-	brz,pt		%o0, 1f
+	brz,pt		%o0, 2f
 	 nop
 
 	TRAP_LOAD_TRAP_BLOCK(%g2, %g3)
@@ -369,10 +375,10 @@
 	call		%o1
 	 add		%sp, (2047 + 128), %o0
 
-	ba,pt		%xcc, 2f
+	ba,pt		%xcc, 3f
 	 nop
 
-1:	sethi		%hi(sparc64_ttable_tl0), %o0
+2:	sethi		%hi(sparc64_ttable_tl0), %o0
 	set		prom_set_trap_table_name, %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x00]
 	mov		1, %g2
@@ -386,7 +392,11 @@
 	call		%o1
 	 add		%sp, (2047 + 128), %o0
 
-2:	ldx		[%l0], %g6
+3:	sethi		%hi(prom_entry_lock), %g2
+	stb		%g0, [%g2 + %lo(prom_entry_lock)]
+	membar		#StoreStore | #StoreLoad
+
+	ldx		[%l0], %g6
 	ldx		[%g6 + TI_TASK], %g4
 
 	mov		1, %g5
diff --git a/arch/sparc64/oprofile/init.c b/arch/sparc64/oprofile/init.c
index 9ab815b..17bb603 100644
--- a/arch/sparc64/oprofile/init.c
+++ b/arch/sparc64/oprofile/init.c
@@ -12,7 +12,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
  
-int __init oprofile_arch_init(struct oprofile_operations * ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
 	return -ENODEV;
 }
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
deleted file mode 100644
index 393bccf..0000000
--- a/arch/um/Kconfig
+++ /dev/null
@@ -1,271 +0,0 @@
-config DEFCONFIG_LIST
-	string
-	option defconfig_list
-	default "arch/$ARCH/defconfig"
-
-# UML uses the generic IRQ subsystem
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config UML
-	bool
-	default y
-
-config MMU
-	bool
-	default y
-
-config NO_IOMEM
-	def_bool y
-
-mainmenu "Linux/Usermode Kernel Configuration"
-
-config ISA
-	bool
-
-config SBUS
-	bool
-
-config PCI
-	bool
-
-config PCMCIA
-	bool
-
-# Yet to do!
-config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default n
-
-config LOCKDEP_SUPPORT
-	bool
-	default y
-
-config STACKTRACE_SUPPORT
-	bool
-	default n
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config GENERIC_BUG
-	bool
-	default y
-	depends on BUG
-
-config GENERIC_TIME
-	bool
-	default y
-
-config GENERIC_CLOCKEVENTS
-	bool
-	default y
-
-# Used in kernel/irq/manage.c and include/linux/irq.h
-config IRQ_RELEASE_METHOD
-	bool
-	default y
-
-config HZ
-	int
-	default 100
-
-menu "UML-specific options"
-
-config STATIC_LINK
-	bool "Force a static link"
-	default n
-	help
-	  This option gives you the ability to force a static link of UML.
-	  Normally, UML is linked as a shared binary.  This is inconvenient for
-	  use in a chroot jail.  So, if you intend to run UML inside a chroot,
-	  you probably want to say Y here.
-	  Additionally, this option enables using higher memory spaces (up to
-	  2.75G) for UML.
-
-source "arch/um/Kconfig.arch"
-source "mm/Kconfig"
-source "kernel/time/Kconfig"
-
-config LD_SCRIPT_STATIC
-	bool
-	default y
-	depends on STATIC_LINK
-
-config LD_SCRIPT_DYN
-	bool
-	default y
-	depends on !LD_SCRIPT_STATIC
-
-source "fs/Kconfig.binfmt"
-
-config HOSTFS
-	tristate "Host filesystem"
-	help
-          While the User-Mode Linux port uses its own root file system for
-          booting and normal file access, this module lets the UML user
-          access files stored on the host.  It does not require any
-          network connection between the Host and UML.  An example use of
-          this might be:
-
-          mount none /tmp/fromhost -t hostfs -o /tmp/umlshare
-
-          where /tmp/fromhost is an empty directory inside UML and
-          /tmp/umlshare is a directory on the host with files the UML user
-          wishes to access.
-
-          For more information, see
-          <http://user-mode-linux.sourceforge.net/hostfs.html>.
-
-          If you'd like to be able to work with files stored on the host,
-          say Y or M here; otherwise say N.
-
-config HPPFS
-	tristate "HoneyPot ProcFS (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  hppfs (HoneyPot ProcFS) is a filesystem which allows UML /proc
-	  entries to be overridden, removed, or fabricated from the host.
-	  Its purpose is to allow a UML to appear to be a physical machine
-	  by removing or changing anything in /proc which gives away the
-	  identity of a UML.
-
-	  See <http://user-mode-linux.sf.net/old/hppfs.html> for more information.
-
-	  You only need this if you are setting up a UML honeypot.  Otherwise,
-	  it is safe to say 'N' here.
-
-config MCONSOLE
-	bool "Management console"
-	default y
-	help
-          The user mode linux management console is a low-level interface to
-          the kernel, somewhat like the i386 SysRq interface.  Since there is
-          a full-blown operating system running under every user mode linux
-          instance, there is much greater flexibility possible than with the
-          SysRq mechanism.
-
-          If you answer 'Y' to this option, to use this feature, you need the
-          mconsole client (called uml_mconsole) which is present in CVS in
-          2.4.5-9um and later (path /tools/mconsole), and is also in the
-          distribution RPM package in 2.4.6 and later.
-
-          It is safe to say 'Y' here.
-
-config MAGIC_SYSRQ
-	bool "Magic SysRq key"
-	depends on MCONSOLE
-	help
-	  If you say Y here, you will have some control over the system even
-	  if the system crashes for example during kernel debugging (e.g., you
-	  will be able to flush the buffer cache to disk, reboot the system
-	  immediately or dump some status information). A key for each of the
-	  possible requests is provided.
-
-	  This is the feature normally accomplished by pressing a key
-	  while holding SysRq (Alt+PrintScreen).
-
-	  On UML, this is accomplished by sending a "sysrq" command with
-	  mconsole, followed by the letter for the requested command.
-
-	  The keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
-	  unless you really know what this hack does.
-
-config SMP
-	bool "Symmetric multi-processing support (EXPERIMENTAL)"
-	default n
-	depends on BROKEN
-	help
-	  This option enables UML SMP support.
-	  It is NOT related to having a real SMP box. Not directly, at least.
-
-	  UML implements virtual SMP by allowing as many processes to run
-	  simultaneously on the host as there are virtual processors configured.
-
-	  Obviously, if the host is a uniprocessor, those processes will
-	  timeshare, but, inside UML, will appear to be running simultaneously.
-	  If the host is a multiprocessor, then UML processes may run
-	  simultaneously, depending on the host scheduler.
-
-	  This, however, is supported only in TT mode. So, if you use the SKAS
-	  patch on your host, switching to TT mode and enabling SMP usually
-	  gives	you worse performances.
-	  Also, since the support for SMP has been under-developed, there could
-	  be some bugs being exposed by enabling SMP.
-
-	  If you don't know what to do, say N.
-
-config NR_CPUS
-	int "Maximum number of CPUs (2-32)"
-	range 2 32
-	depends on SMP
-	default "32"
-
-config HIGHMEM
-	bool "Highmem support (EXPERIMENTAL)"
-	depends on !64BIT && EXPERIMENTAL
-	default n
-	help
-	  This was used to allow UML to run with big amounts of memory.
-	  Currently it is unstable, so if unsure say N.
-
-	  To use big amounts of memory, it is recommended enable static
-	  linking (i.e. CONFIG_STATIC_LINK) - this should allow the
-	  guest to use up to 2.75G of memory.
-
-config KERNEL_STACK_ORDER
-	int "Kernel stack size order"
-	default 1 if 64BIT
-	range 1 10 if 64BIT
-	default 0 if !64BIT
-	help
-	  This option determines the size of UML kernel stacks.  They will
-	  be 1 << order pages.  The default is OK unless you're running Valgrind
-	  on UML, in which case, set this to 3.
-
-endmenu
-
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
-source "drivers/block/Kconfig"
-
-source "arch/um/Kconfig.char"
-
-source "drivers/base/Kconfig"
-
-source "net/Kconfig"
-
-source "arch/um/Kconfig.net"
-
-source "drivers/net/Kconfig"
-
-source "drivers/connector/Kconfig"
-
-source "fs/Kconfig"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/md/Kconfig"
-
-if BROKEN
-	source "drivers/mtd/Kconfig"
-endif
-
-source "drivers/leds/Kconfig"
-
-#This is just to shut up some Kconfig warnings, so no prompt.
-config INPUT
-	bool
-	default n
-
-source "arch/um/Kconfig.debug"
diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
new file mode 100644
index 0000000..0d207e7
--- /dev/null
+++ b/arch/um/Kconfig.common
@@ -0,0 +1,77 @@
+config DEFCONFIG_LIST
+	string
+	option defconfig_list
+	default "arch/$ARCH/defconfig"
+
+# UML uses the generic IRQ subsystem
+config GENERIC_HARDIRQS
+	bool
+	default y
+
+config UML
+	bool
+	default y
+
+config MMU
+	bool
+	default y
+
+config NO_IOMEM
+	def_bool y
+
+mainmenu "Linux/Usermode Kernel Configuration"
+
+config ISA
+	bool
+
+config SBUS
+	bool
+
+config PCI
+	bool
+
+config PCMCIA
+	bool
+
+# Yet to do!
+config TRACE_IRQFLAGS_SUPPORT
+	bool
+	default n
+
+config LOCKDEP_SUPPORT
+	bool
+	default y
+
+config STACKTRACE_SUPPORT
+	bool
+	default n
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+config GENERIC_BUG
+	bool
+	default y
+	depends on BUG
+
+config GENERIC_TIME
+	bool
+	default y
+
+config GENERIC_CLOCKEVENTS
+	bool
+	default y
+
+# Used in kernel/irq/manage.c and include/linux/irq.h
+config IRQ_RELEASE_METHOD
+	bool
+	default y
+
+config HZ
+	int
+	default 100
+
+config SUBARCH
+	string
+	option env="SUBARCH"
diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386
deleted file mode 100644
index 1f57c11..0000000
--- a/arch/um/Kconfig.i386
+++ /dev/null
@@ -1,45 +0,0 @@
-menu "Host processor type and features"
-
-source "arch/x86/Kconfig.cpu"
-
-endmenu
-
-config UML_X86
-	bool
-	default y
-
-config X86_32
-	bool
-	default y
-  	select HAVE_AOUT
-
-config RWSEM_XCHGADD_ALGORITHM
-	def_bool y
-
-config 64BIT
-	bool
-	default n
-
-config 3_LEVEL_PGTABLES
-	bool "Three-level pagetables (EXPERIMENTAL)"
-	default n
-	depends on EXPERIMENTAL
-	help
-	Three-level pagetables will let UML have more than 4G of physical
-	memory.  All the memory that can't be mapped directly will be treated
-	as high memory.
-
-	However, this it experimental on 32-bit architectures, so if unsure say
-	N (on x86-64 it's automatically enabled, instead, as it's safe there).
-
-config ARCH_HAS_SC_SIGNALS
-	bool
-	default y
-
-config ARCH_REUSE_HOST_VSYSCALL_AREA
-	bool
-	default y
-
-config GENERIC_HWEIGHT
-	bool
-	default y
diff --git a/arch/um/Kconfig.rest b/arch/um/Kconfig.rest
new file mode 100644
index 0000000..7b5cea7
--- /dev/null
+++ b/arch/um/Kconfig.rest
@@ -0,0 +1,42 @@
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+source "drivers/block/Kconfig"
+
+source "arch/um/Kconfig.char"
+
+source "drivers/base/Kconfig"
+
+source "net/Kconfig"
+
+source "arch/um/Kconfig.net"
+
+source "drivers/net/Kconfig"
+
+source "drivers/connector/Kconfig"
+
+source "fs/Kconfig"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+source "drivers/scsi/Kconfig"
+
+source "drivers/md/Kconfig"
+
+if BROKEN
+	source "drivers/mtd/Kconfig"
+endif
+
+source "drivers/leds/Kconfig"
+
+#This is just to shut up some Kconfig warnings, so no prompt.
+config INPUT
+	bool
+	default n
+
+source "arch/um/Kconfig.debug"
diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig.um
new file mode 100644
index 0000000..ec2b8da
--- /dev/null
+++ b/arch/um/Kconfig.um
@@ -0,0 +1,149 @@
+config STATIC_LINK
+	bool "Force a static link"
+	default n
+	help
+	  This option gives you the ability to force a static link of UML.
+	  Normally, UML is linked as a shared binary.  This is inconvenient for
+	  use in a chroot jail.  So, if you intend to run UML inside a chroot,
+	  you probably want to say Y here.
+	  Additionally, this option enables using higher memory spaces (up to
+	  2.75G) for UML.
+
+source "mm/Kconfig"
+source "kernel/time/Kconfig"
+
+config LD_SCRIPT_STATIC
+	bool
+	default y
+	depends on STATIC_LINK
+
+config LD_SCRIPT_DYN
+	bool
+	default y
+	depends on !LD_SCRIPT_STATIC
+
+source "fs/Kconfig.binfmt"
+
+config HOSTFS
+	tristate "Host filesystem"
+	help
+          While the User-Mode Linux port uses its own root file system for
+          booting and normal file access, this module lets the UML user
+          access files stored on the host.  It does not require any
+          network connection between the Host and UML.  An example use of
+          this might be:
+
+          mount none /tmp/fromhost -t hostfs -o /tmp/umlshare
+
+          where /tmp/fromhost is an empty directory inside UML and
+          /tmp/umlshare is a directory on the host with files the UML user
+          wishes to access.
+
+          For more information, see
+          <http://user-mode-linux.sourceforge.net/hostfs.html>.
+
+          If you'd like to be able to work with files stored on the host,
+          say Y or M here; otherwise say N.
+
+config HPPFS
+	tristate "HoneyPot ProcFS (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  hppfs (HoneyPot ProcFS) is a filesystem which allows UML /proc
+	  entries to be overridden, removed, or fabricated from the host.
+	  Its purpose is to allow a UML to appear to be a physical machine
+	  by removing or changing anything in /proc which gives away the
+	  identity of a UML.
+
+	  See <http://user-mode-linux.sf.net/old/hppfs.html> for more information.
+
+	  You only need this if you are setting up a UML honeypot.  Otherwise,
+	  it is safe to say 'N' here.
+
+config MCONSOLE
+	bool "Management console"
+	default y
+	help
+          The user mode linux management console is a low-level interface to
+          the kernel, somewhat like the i386 SysRq interface.  Since there is
+          a full-blown operating system running under every user mode linux
+          instance, there is much greater flexibility possible than with the
+          SysRq mechanism.
+
+          If you answer 'Y' to this option, to use this feature, you need the
+          mconsole client (called uml_mconsole) which is present in CVS in
+          2.4.5-9um and later (path /tools/mconsole), and is also in the
+          distribution RPM package in 2.4.6 and later.
+
+          It is safe to say 'Y' here.
+
+config MAGIC_SYSRQ
+	bool "Magic SysRq key"
+	depends on MCONSOLE
+	help
+	  If you say Y here, you will have some control over the system even
+	  if the system crashes for example during kernel debugging (e.g., you
+	  will be able to flush the buffer cache to disk, reboot the system
+	  immediately or dump some status information). A key for each of the
+	  possible requests is provided.
+
+	  This is the feature normally accomplished by pressing a key
+	  while holding SysRq (Alt+PrintScreen).
+
+	  On UML, this is accomplished by sending a "sysrq" command with
+	  mconsole, followed by the letter for the requested command.
+
+	  The keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+	  unless you really know what this hack does.
+
+config SMP
+	bool "Symmetric multi-processing support (EXPERIMENTAL)"
+	default n
+	depends on BROKEN
+	help
+	  This option enables UML SMP support.
+	  It is NOT related to having a real SMP box. Not directly, at least.
+
+	  UML implements virtual SMP by allowing as many processes to run
+	  simultaneously on the host as there are virtual processors configured.
+
+	  Obviously, if the host is a uniprocessor, those processes will
+	  timeshare, but, inside UML, will appear to be running simultaneously.
+	  If the host is a multiprocessor, then UML processes may run
+	  simultaneously, depending on the host scheduler.
+
+	  This, however, is supported only in TT mode. So, if you use the SKAS
+	  patch on your host, switching to TT mode and enabling SMP usually
+	  gives	you worse performances.
+	  Also, since the support for SMP has been under-developed, there could
+	  be some bugs being exposed by enabling SMP.
+
+	  If you don't know what to do, say N.
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-32)"
+	range 2 32
+	depends on SMP
+	default "32"
+
+config HIGHMEM
+	bool "Highmem support (EXPERIMENTAL)"
+	depends on !64BIT && EXPERIMENTAL
+	default n
+	help
+	  This was used to allow UML to run with big amounts of memory.
+	  Currently it is unstable, so if unsure say N.
+
+	  To use big amounts of memory, it is recommended enable static
+	  linking (i.e. CONFIG_STATIC_LINK) - this should allow the
+	  guest to use up to 2.75G of memory.
+
+config KERNEL_STACK_ORDER
+	int "Kernel stack size order"
+	default 1 if 64BIT
+	range 1 10 if 64BIT
+	default 0 if !64BIT
+	help
+	  This option determines the size of UML kernel stacks.  They will
+	  be 1 << order pages.  The default is OK unless you're running Valgrind
+	  on UML, in which case, set this to 3.
diff --git a/arch/um/Kconfig.x86 b/arch/um/Kconfig.x86
new file mode 100644
index 0000000..5ee3280
--- /dev/null
+++ b/arch/um/Kconfig.x86
@@ -0,0 +1,56 @@
+source "arch/um/Kconfig.common"
+
+menu "UML-specific options"
+
+menu "Host processor type and features"
+
+source "arch/x86/Kconfig.cpu"
+
+endmenu
+
+config UML_X86
+	def_bool y
+
+config 64BIT
+	bool
+	default SUBARCH = "x86_64"
+
+config X86_32
+	def_bool !64BIT
+	select HAVE_AOUT
+
+config RWSEM_XCHGADD_ALGORITHM
+	def_bool X86_XADD
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool !X86_XADD
+
+config 3_LEVEL_PGTABLES
+	bool "Three-level pagetables (EXPERIMENTAL)" if !64BIT
+	default 64BIT
+	depends on EXPERIMENTAL
+	help
+	Three-level pagetables will let UML have more than 4G of physical
+	memory.  All the memory that can't be mapped directly will be treated
+	as high memory.
+
+	However, this it experimental on 32-bit architectures, so if unsure say
+	N (on x86-64 it's automatically enabled, instead, as it's safe there).
+
+config ARCH_HAS_SC_SIGNALS
+	def_bool !64BIT
+
+config ARCH_REUSE_HOST_VSYSCALL_AREA
+	def_bool !64BIT
+
+config SMP_BROKEN
+	def_bool 64BIT
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+source "arch/um/Kconfig.um"
+
+endmenu
+
+source "arch/um/Kconfig.rest"
diff --git a/arch/um/Kconfig.x86_64 b/arch/um/Kconfig.x86_64
deleted file mode 100644
index 40b3407..0000000
--- a/arch/um/Kconfig.x86_64
+++ /dev/null
@@ -1,39 +0,0 @@
-
-menu "Host processor type and features"
-
-source "arch/x86/Kconfig.cpu"
-
-endmenu
-
-config UML_X86
-	bool
-	default y
-
-config 64BIT
-	bool
-	default y
-
-#XXX: this is so in the underlying arch, but it's wrong!!!
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
-config 3_LEVEL_PGTABLES
-       bool
-       default y
-
-config ARCH_HAS_SC_SIGNALS
-	bool
-	default n
-
-config ARCH_REUSE_HOST_VSYSCALL_AREA
-	bool
-	default n
-
-config SMP_BROKEN
-	bool
-	default y
-
-config GENERIC_HWEIGHT
-	bool
-	default y
diff --git a/arch/um/Makefile b/arch/um/Makefile
index ca40397..d944c34 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -18,28 +18,16 @@
 			   $(ARCH_DIR)/drivers/		\
 			   $(ARCH_DIR)/os-$(OS)/
 
-# Have to precede the include because the included Makefiles reference them.
-SYMLINK_HEADERS := archparam.h system.h sigcontext.h processor.h ptrace.h \
-	module.h vm-flags.h elf.h host_ldt.h
-SYMLINK_HEADERS := $(foreach header,$(SYMLINK_HEADERS),include/asm-um/$(header))
-
-# XXX: The "os" symlink is only used by arch/um/include/os.h, which includes
-# ../os/include/file.h
-#
-# These are cleaned up during mrproper. Please DO NOT fix it again, this is
-# the Correct Thing(tm) to do!
-ARCH_SYMLINKS = include/asm-um/arch $(ARCH_DIR)/include/sysdep $(ARCH_DIR)/os \
-	$(SYMLINK_HEADERS) $(ARCH_DIR)/include/uml-config.h
-
-MODE_INCLUDE	+= -I$(srctree)/$(ARCH_DIR)/include/skas
+MODE_INCLUDE	+= -I$(srctree)/$(ARCH_DIR)/include/shared/skas
 
 include $(srctree)/$(ARCH_DIR)/Makefile-skas
 
-ARCH_INCLUDE	:= -I$(ARCH_DIR)/include
+ARCH_INCLUDE	:= -I$(srctree)/$(ARCH_DIR)/include/shared
+ARCH_INCLUDE	+= -I$(srctree)/$(ARCH_DIR)/sys-$(SUBARCH)/shared
 ifneq ($(KBUILD_SRC),)
-ARCH_INCLUDE	+= -I$(srctree)/$(ARCH_DIR)/include
+ARCH_INCLUDE	+= -I$(ARCH_DIR)/include/shared # for two generated files
 endif
-SYS_DIR		:= $(ARCH_DIR)/include/sysdep-$(SUBARCH)
+KBUILD_CPPFLAGS += -I$(srctree)/$(ARCH_DIR)/sys-$(SUBARCH)
 
 # -Dvmap=kernel_vmap prevents anything from referencing the libpcap.o symbol so
 # named - it's a common symbol in libpcap, so we get a binary which crashes.
@@ -65,6 +53,8 @@
 #This will adjust *FLAGS accordingly to the platform.
 include $(srctree)/$(ARCH_DIR)/Makefile-os-$(OS)
 
+KBUILD_CPPFLAGS += -I$(srctree)/arch/$(HEADER_ARCH)/include
+
 # -Derrno=kernel_errno - This turns all kernel references to errno into
 # kernel_errno to separate them from the libc errno.  This allows -fno-common
 # in KBUILD_CFLAGS.  Otherwise, it would cause ld to complain about the two different
@@ -93,14 +83,10 @@
   echo '		   find in the kernel root.'
 endef
 
-ifneq ($(KBUILD_SRC),)
-$(shell mkdir -p $(ARCH_DIR) && ln -fsn $(srctree)/$(ARCH_DIR)/Kconfig.$(SUBARCH) $(ARCH_DIR)/Kconfig.arch)
-else
-$(shell cd $(ARCH_DIR) && ln -sf Kconfig.$(SUBARCH) Kconfig.arch)
-endif
+KBUILD_KCONFIG := arch/um/Kconfig.$(HEADER_ARCH)
 
-archprepare: $(ARCH_SYMLINKS) $(ARCH_DIR)/include/user_constants.h
-prepare: $(ARCH_DIR)/include/kern_constants.h
+archprepare: $(ARCH_DIR)/include/shared/user_constants.h
+prepare: $(ARCH_DIR)/include/shared/kern_constants.h
 
 LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static
 LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib
@@ -132,62 +118,19 @@
 
 # When cleaning we don't include .config, so we don't include
 # TT or skas makefiles and don't clean skas_ptregs.h.
-CLEAN_FILES += linux x.i gmon.out $(ARCH_DIR)/include/uml-config.h \
-	$(ARCH_DIR)/include/user_constants.h \
-	$(ARCH_DIR)/include/kern_constants.h $(ARCH_DIR)/Kconfig.arch
-
-MRPROPER_FILES += $(ARCH_SYMLINKS)
+CLEAN_FILES += linux x.i gmon.out \
+	$(ARCH_DIR)/include/shared/user_constants.h \
+	$(ARCH_DIR)/include/shared/kern_constants.h
 
 archclean:
 	@find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \
 		-o -name '*.gcov' \) -type f -print | xargs rm -f
 
-$(SYMLINK_HEADERS):
-	@echo '  SYMLINK $@'
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p $(objtree)/include/asm-um
-	$(Q)ln -fsn $(srctree)/include/asm-um/$(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $@
-else
-	$(Q)cd $(srctree)/$(dir $@) ; \
-	ln -sf $(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $(notdir $@)
-endif
-
-include/asm-um/arch:
-	@echo '  SYMLINK $@'
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p $(objtree)/include/asm-um
-	$(Q)ln -fsn $(srctree)/include/asm-$(HEADER_ARCH) include/asm-um/arch
-else
-	$(Q)cd $(srctree)/include/asm-um && ln -fsn ../asm-$(HEADER_ARCH) arch
-endif
-
-$(objtree)/$(ARCH_DIR)/include:
+$(objtree)/$(ARCH_DIR)/include/shared:
 	@echo '  MKDIR $@'
 	$(Q)mkdir -p $@
 
-$(ARCH_DIR)/include/sysdep: $(objtree)/$(ARCH_DIR)/include
-	@echo '  SYMLINK $@'
-ifneq ($(KBUILD_SRC),)
-	$(Q)ln -fsn $(srctree)/$(ARCH_DIR)/include/sysdep-$(SUBARCH) $(ARCH_DIR)/include/sysdep
-else
-	$(Q)cd $(ARCH_DIR)/include && ln -fsn sysdep-$(SUBARCH) sysdep
-endif
-
-$(ARCH_DIR)/os:
-	@echo '  SYMLINK $@'
-ifneq ($(KBUILD_SRC),)
-	$(Q)ln -fsn $(srctree)/$(ARCH_DIR)/os-$(OS) $(ARCH_DIR)/os
-else
-	$(Q)cd $(ARCH_DIR) && ln -fsn os-$(OS) os
-endif
-
 # Generated files
-define filechk_umlconfig
-	sed 's/ CONFIG/ UML_CONFIG/'
-endef
-
-$(ARCH_DIR)/include/uml-config.h : include/linux/autoconf.h
-	$(call filechk,umlconfig)
 
 $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s: FORCE
 	$(Q)$(MAKE) $(build)=$(ARCH_DIR)/sys-$(SUBARCH) $@
@@ -205,11 +148,11 @@
          echo ""; )
 endef
 
-$(ARCH_DIR)/include/user_constants.h: $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s
+$(ARCH_DIR)/include/shared/user_constants.h: $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s
 	$(call filechk,gen-asm-offsets)
 
-$(ARCH_DIR)/include/kern_constants.h: $(objtree)/$(ARCH_DIR)/include
+$(ARCH_DIR)/include/shared/kern_constants.h: $(objtree)/$(ARCH_DIR)/include/shared
 	@echo '  SYMLINK $@'
-	$(Q)ln -sf ../../../include/asm-um/asm-offsets.h $@
+	$(Q)ln -sf ../../../../include/asm/asm-offsets.h $@
 
-export SUBARCH USER_CFLAGS CFLAGS_NO_HARDENING OS HEADER_ARCH
+export SUBARCH USER_CFLAGS CFLAGS_NO_HARDENING OS HEADER_ARCH DEV_NULL_PATH
diff --git a/arch/um/Makefile-os-Linux b/arch/um/Makefile-os-Linux
index 5285948..2c8a598 100644
--- a/arch/um/Makefile-os-Linux
+++ b/arch/um/Makefile-os-Linux
@@ -6,3 +6,4 @@
 # To get a definition of F_SETSIG
 USER_CFLAGS += -D_GNU_SOURCE -D_LARGEFILE64_SOURCE
 KBUILD_CFLAGS += -D_LARGEFILE64_SOURCE
+DEV_NULL_PATH = \"/dev/null\"
diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile
index d283e7b..1d9b6ae 100644
--- a/arch/um/drivers/Makefile
+++ b/arch/um/drivers/Makefile
@@ -62,5 +62,6 @@
 
 # pcap_user.o must be added explicitly.
 USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o pcap_user.o vde_user.o
+CFLAGS_null.o = -DDEV_NULL=$(DEV_NULL_PATH)
 
 include arch/um/scripts/Makefile.rules
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index b58fb89..0a86811 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -98,9 +98,9 @@
 
 static DEFINE_MUTEX(ubd_lock);
 
-static int ubd_open(struct inode * inode, struct file * filp);
-static int ubd_release(struct inode * inode, struct file * file);
-static int ubd_ioctl(struct inode * inode, struct file * file,
+static int ubd_open(struct block_device *bdev, fmode_t mode);
+static int ubd_release(struct gendisk *disk, fmode_t mode);
+static int ubd_ioctl(struct block_device *bdev, fmode_t mode,
 		     unsigned int cmd, unsigned long arg);
 static int ubd_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 
@@ -1112,9 +1112,9 @@
 
 device_initcall(ubd_driver_init);
 
-static int ubd_open(struct inode *inode, struct file *filp)
+static int ubd_open(struct block_device *bdev, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
+	struct gendisk *disk = bdev->bd_disk;
 	struct ubd *ubd_dev = disk->private_data;
 	int err = 0;
 
@@ -1131,7 +1131,7 @@
 
 	/* This should no more be needed. And it didn't work anyway to exclude
 	 * read-write remounting of filesystems.*/
-	/*if((filp->f_mode & FMODE_WRITE) && !ubd_dev->openflags.w){
+	/*if((mode & FMODE_WRITE) && !ubd_dev->openflags.w){
 	        if(--ubd_dev->count == 0) ubd_close_dev(ubd_dev);
 	        err = -EROFS;
 	}*/
@@ -1139,9 +1139,8 @@
 	return err;
 }
 
-static int ubd_release(struct inode * inode, struct file * file)
+static int ubd_release(struct gendisk *disk, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
 	struct ubd *ubd_dev = disk->private_data;
 
 	if(--ubd_dev->count == 0)
@@ -1306,10 +1305,10 @@
 	return 0;
 }
 
-static int ubd_ioctl(struct inode * inode, struct file * file,
+static int ubd_ioctl(struct block_device *bdev, fmode_t mode,
 		     unsigned int cmd, unsigned long arg)
 {
-	struct ubd *ubd_dev = inode->i_bdev->bd_disk->private_data;
+	struct ubd *ubd_dev = bdev->bd_disk->private_data;
 	struct hd_driveid ubd_id = {
 		.cyls		= 0,
 		.heads		= 128,
diff --git a/arch/um/include/as-layout.h b/arch/um/include/as-layout.h
deleted file mode 100644
index 58e852d..0000000
--- a/arch/um/include/as-layout.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (C) 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __START_H__
-#define __START_H__
-
-#include "uml-config.h"
-#include "kern_constants.h"
-
-/*
- * Stolen from linux/const.h, which can't be directly included since
- * this is used in userspace code, which has no access to the kernel
- * headers.  Changed to be suitable for adding casts to the start,
- * rather than "UL" to the end.
- */
-
-/* Some constant macros are used in both assembler and
- * C code.  Therefore we cannot annotate them always with
- * 'UL' and other type specifiers unilaterally.  We
- * use the following macros to deal with this.
- */
-
-#ifdef __ASSEMBLY__
-#define _UML_AC(X, Y)	(Y)
-#else
-#define __UML_AC(X, Y)	(X(Y))
-#define _UML_AC(X, Y)	__UML_AC(X, Y)
-#endif
-
-#define STUB_START _UML_AC(, 0x100000)
-#define STUB_CODE _UML_AC((unsigned long), STUB_START)
-#define STUB_DATA _UML_AC((unsigned long), STUB_CODE + UM_KERN_PAGE_SIZE)
-#define STUB_END _UML_AC((unsigned long), STUB_DATA + UM_KERN_PAGE_SIZE)
-
-#ifndef __ASSEMBLY__
-
-#include "sysdep/ptrace.h"
-
-struct cpu_task {
-	int pid;
-	void *task;
-};
-
-extern struct cpu_task cpu_tasks[];
-
-extern unsigned long low_physmem;
-extern unsigned long high_physmem;
-extern unsigned long uml_physmem;
-extern unsigned long uml_reserved;
-extern unsigned long end_vm;
-extern unsigned long start_vm;
-extern unsigned long long highmem;
-
-extern unsigned long _stext, _etext, _sdata, _edata, __bss_start, _end;
-extern unsigned long _unprotected_end;
-extern unsigned long brk_start;
-
-extern unsigned long host_task_size;
-
-extern int linux_main(int argc, char **argv);
-
-extern void (*sig_info[])(int, struct uml_pt_regs *);
-
-#endif
-
-#endif
diff --git a/include/asm-um/a.out-core.h b/arch/um/include/asm/a.out-core.h
similarity index 100%
rename from include/asm-um/a.out-core.h
rename to arch/um/include/asm/a.out-core.h
diff --git a/include/asm-um/apic.h b/arch/um/include/asm/apic.h
similarity index 100%
rename from include/asm-um/apic.h
rename to arch/um/include/asm/apic.h
diff --git a/include/asm-um/auxvec.h b/arch/um/include/asm/auxvec.h
similarity index 100%
rename from include/asm-um/auxvec.h
rename to arch/um/include/asm/auxvec.h
diff --git a/include/asm-um/bugs.h b/arch/um/include/asm/bugs.h
similarity index 100%
rename from include/asm-um/bugs.h
rename to arch/um/include/asm/bugs.h
diff --git a/include/asm-um/cache.h b/arch/um/include/asm/cache.h
similarity index 100%
rename from include/asm-um/cache.h
rename to arch/um/include/asm/cache.h
diff --git a/include/asm-um/checksum.h b/arch/um/include/asm/checksum.h
similarity index 100%
rename from include/asm-um/checksum.h
rename to arch/um/include/asm/checksum.h
diff --git a/include/asm-um/common.lds.S b/arch/um/include/asm/common.lds.S
similarity index 100%
rename from include/asm-um/common.lds.S
rename to arch/um/include/asm/common.lds.S
diff --git a/include/asm-um/cputime.h b/arch/um/include/asm/cputime.h
similarity index 100%
rename from include/asm-um/cputime.h
rename to arch/um/include/asm/cputime.h
diff --git a/include/asm-um/current.h b/arch/um/include/asm/current.h
similarity index 100%
rename from include/asm-um/current.h
rename to arch/um/include/asm/current.h
diff --git a/include/asm-um/delay.h b/arch/um/include/asm/delay.h
similarity index 100%
rename from include/asm-um/delay.h
rename to arch/um/include/asm/delay.h
diff --git a/include/asm-um/desc.h b/arch/um/include/asm/desc.h
similarity index 100%
rename from include/asm-um/desc.h
rename to arch/um/include/asm/desc.h
diff --git a/include/asm-um/device.h b/arch/um/include/asm/device.h
similarity index 100%
rename from include/asm-um/device.h
rename to arch/um/include/asm/device.h
diff --git a/include/asm-um/dma-mapping.h b/arch/um/include/asm/dma-mapping.h
similarity index 100%
rename from include/asm-um/dma-mapping.h
rename to arch/um/include/asm/dma-mapping.h
diff --git a/include/asm-um/dma.h b/arch/um/include/asm/dma.h
similarity index 100%
rename from include/asm-um/dma.h
rename to arch/um/include/asm/dma.h
diff --git a/include/asm-um/emergency-restart.h b/arch/um/include/asm/emergency-restart.h
similarity index 100%
rename from include/asm-um/emergency-restart.h
rename to arch/um/include/asm/emergency-restart.h
diff --git a/arch/um/include/asm/fixmap.h b/arch/um/include/asm/fixmap.h
new file mode 100644
index 0000000..69c0252
--- /dev/null
+++ b/arch/um/include/asm/fixmap.h
@@ -0,0 +1,99 @@
+#ifndef __UM_FIXMAP_H
+#define __UM_FIXMAP_H
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/kmap_types.h>
+#include <asm/archparam.h>
+#include <asm/page.h>
+#include <linux/threads.h>
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special  addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanizm,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap (enum fixed_addresses idx,
+			  unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap, and leave one page empty
+ * at the top of mem..
+ */
+
+#define FIXADDR_TOP	(TASK_SIZE - 2 * PAGE_SIZE)
+#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)      ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+      BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+      return __virt_to_fix(vaddr);
+}
+
+#endif
diff --git a/include/asm-um/futex.h b/arch/um/include/asm/futex.h
similarity index 100%
rename from include/asm-um/futex.h
rename to arch/um/include/asm/futex.h
diff --git a/include/asm-um/hardirq.h b/arch/um/include/asm/hardirq.h
similarity index 100%
rename from include/asm-um/hardirq.h
rename to arch/um/include/asm/hardirq.h
diff --git a/include/asm-um/hw_irq.h b/arch/um/include/asm/hw_irq.h
similarity index 100%
rename from include/asm-um/hw_irq.h
rename to arch/um/include/asm/hw_irq.h
diff --git a/include/asm-um/io.h b/arch/um/include/asm/io.h
similarity index 100%
rename from include/asm-um/io.h
rename to arch/um/include/asm/io.h
diff --git a/include/asm-um/irq.h b/arch/um/include/asm/irq.h
similarity index 100%
rename from include/asm-um/irq.h
rename to arch/um/include/asm/irq.h
diff --git a/include/asm-um/irq_regs.h b/arch/um/include/asm/irq_regs.h
similarity index 100%
rename from include/asm-um/irq_regs.h
rename to arch/um/include/asm/irq_regs.h
diff --git a/include/asm-um/irq_vectors.h b/arch/um/include/asm/irq_vectors.h
similarity index 100%
rename from include/asm-um/irq_vectors.h
rename to arch/um/include/asm/irq_vectors.h
diff --git a/include/asm-um/irqflags.h b/arch/um/include/asm/irqflags.h
similarity index 100%
rename from include/asm-um/irqflags.h
rename to arch/um/include/asm/irqflags.h
diff --git a/include/asm-um/kdebug.h b/arch/um/include/asm/kdebug.h
similarity index 100%
rename from include/asm-um/kdebug.h
rename to arch/um/include/asm/kdebug.h
diff --git a/include/asm-um/kmap_types.h b/arch/um/include/asm/kmap_types.h
similarity index 100%
rename from include/asm-um/kmap_types.h
rename to arch/um/include/asm/kmap_types.h
diff --git a/include/asm-um/mmu.h b/arch/um/include/asm/mmu.h
similarity index 100%
rename from include/asm-um/mmu.h
rename to arch/um/include/asm/mmu.h
diff --git a/include/asm-um/mmu_context.h b/arch/um/include/asm/mmu_context.h
similarity index 100%
rename from include/asm-um/mmu_context.h
rename to arch/um/include/asm/mmu_context.h
diff --git a/include/asm-um/mutex.h b/arch/um/include/asm/mutex.h
similarity index 100%
rename from include/asm-um/mutex.h
rename to arch/um/include/asm/mutex.h
diff --git a/arch/um/include/asm/page.h b/arch/um/include/asm/page.h
new file mode 100644
index 0000000..55f28a0
--- /dev/null
+++ b/arch/um/include/asm/page.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com)
+ * Copyright 2003 PathScale, Inc.
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PAGE_H
+#define __UM_PAGE_H
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#ifndef __ASSEMBLY__
+
+struct page;
+
+#include <linux/types.h>
+#include <sysdep/vm-flags.h>
+
+/*
+ * These are used to make use of C type-checking..
+ */
+
+#define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#if defined(CONFIG_3_LEVEL_PGTABLES) && !defined(CONFIG_64BIT)
+
+typedef struct { unsigned long pte_low, pte_high; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#define pte_val(x) ((x).pte_low | ((unsigned long long) (x).pte_high << 32))
+
+#define pte_get_bits(pte, bits) ((pte).pte_low & (bits))
+#define pte_set_bits(pte, bits) ((pte).pte_low |= (bits))
+#define pte_clear_bits(pte, bits) ((pte).pte_low &= ~(bits))
+#define pte_copy(to, from) ({ (to).pte_high = (from).pte_high; \
+			      smp_wmb(); \
+			      (to).pte_low = (from).pte_low; })
+#define pte_is_zero(pte) (!((pte).pte_low & ~_PAGE_NEWPAGE) && !(pte).pte_high)
+#define pte_set_val(pte, phys, prot) \
+	({ (pte).pte_high = (phys) >> 32; \
+	   (pte).pte_low = (phys) | pgprot_val(prot); })
+
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x) ((pmd_t) { (x) } )
+
+typedef unsigned long long pfn_t;
+typedef unsigned long long phys_t;
+
+#else
+
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+
+#ifdef CONFIG_3_LEVEL_PGTABLES
+typedef struct { unsigned long pmd; } pmd_t;
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x) ((pmd_t) { (x) } )
+#endif
+
+#define pte_val(x)	((x).pte)
+
+
+#define pte_get_bits(p, bits) ((p).pte & (bits))
+#define pte_set_bits(p, bits) ((p).pte |= (bits))
+#define pte_clear_bits(p, bits) ((p).pte &= ~(bits))
+#define pte_copy(to, from) ((to).pte = (from).pte)
+#define pte_is_zero(p) (!((p).pte & ~_PAGE_NEWPAGE))
+#define pte_set_val(p, phys, prot) (p).pte = (phys | pgprot_val(prot))
+
+typedef unsigned long pfn_t;
+typedef unsigned long phys_t;
+
+#endif
+
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+typedef struct page *pgtable_t;
+
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+extern unsigned long uml_physmem;
+
+#define PAGE_OFFSET (uml_physmem)
+#define KERNELBASE PAGE_OFFSET
+
+#define __va_space (8*1024*1024)
+
+#include "mem.h"
+
+/* Cast to unsigned long before casting to void * to avoid a warning from
+ * mmap_kmem about cutting a long long down to a void *.  Not sure that
+ * casting is the right thing, but 32-bit UML can't have 64-bit virtual
+ * addresses
+ */
+#define __pa(virt) to_phys((void *) (unsigned long) (virt))
+#define __va(phys) to_virt((unsigned long) (phys))
+
+#define phys_to_pfn(p) ((pfn_t) ((p) >> PAGE_SHIFT))
+#define pfn_to_phys(pfn) ((phys_t) ((pfn) << PAGE_SHIFT))
+
+#define pfn_valid(pfn) ((pfn) < max_mapnr)
+#define virt_addr_valid(v) pfn_valid(phys_to_pfn(__pa(v)))
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif	/* __ASSEMBLY__ */
+#endif	/* __UM_PAGE_H */
diff --git a/include/asm-um/page_offset.h b/arch/um/include/asm/page_offset.h
similarity index 100%
rename from include/asm-um/page_offset.h
rename to arch/um/include/asm/page_offset.h
diff --git a/include/asm-um/param.h b/arch/um/include/asm/param.h
similarity index 100%
rename from include/asm-um/param.h
rename to arch/um/include/asm/param.h
diff --git a/include/asm-um/pci.h b/arch/um/include/asm/pci.h
similarity index 100%
rename from include/asm-um/pci.h
rename to arch/um/include/asm/pci.h
diff --git a/include/asm-um/pda.h b/arch/um/include/asm/pda.h
similarity index 100%
rename from include/asm-um/pda.h
rename to arch/um/include/asm/pda.h
diff --git a/include/asm-um/pgalloc.h b/arch/um/include/asm/pgalloc.h
similarity index 100%
rename from include/asm-um/pgalloc.h
rename to arch/um/include/asm/pgalloc.h
diff --git a/include/asm-um/pgtable-2level.h b/arch/um/include/asm/pgtable-2level.h
similarity index 100%
rename from include/asm-um/pgtable-2level.h
rename to arch/um/include/asm/pgtable-2level.h
diff --git a/include/asm-um/pgtable-3level.h b/arch/um/include/asm/pgtable-3level.h
similarity index 100%
rename from include/asm-um/pgtable-3level.h
rename to arch/um/include/asm/pgtable-3level.h
diff --git a/arch/um/include/asm/pgtable.h b/arch/um/include/asm/pgtable.h
new file mode 100644
index 0000000..58da248
--- /dev/null
+++ b/arch/um/include/asm/pgtable.h
@@ -0,0 +1,366 @@
+/* 
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Copyright 2003 PathScale, Inc.
+ * Derived from include/asm-i386/pgtable.h
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PGTABLE_H
+#define __UM_PGTABLE_H
+
+#include <asm/fixmap.h>
+
+#define _PAGE_PRESENT	0x001
+#define _PAGE_NEWPAGE	0x002
+#define _PAGE_NEWPROT	0x004
+#define _PAGE_RW	0x020
+#define _PAGE_USER	0x040
+#define _PAGE_ACCESSED	0x080
+#define _PAGE_DIRTY	0x100
+/* If _PAGE_PRESENT is clear, we use these: */
+#define _PAGE_FILE	0x008	/* nonlinear file mapping, saved PTE; unset:swap */
+#define _PAGE_PROTNONE	0x010	/* if the user mapped it with PROT_NONE;
+				   pte_present gives true */
+
+#ifdef CONFIG_3_LEVEL_PGTABLES
+#include "asm/pgtable-3level.h"
+#else
+#include "asm/pgtable-2level.h"
+#endif
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/* zero page used for uninitialized stuff */
+extern unsigned long *empty_zero_page;
+
+#define pgtable_cache_init() do ; while (0)
+
+/* Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+
+extern unsigned long end_iomem;
+
+#define VMALLOC_OFFSET	(__va_space)
+#define VMALLOC_START ((end_iomem + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define PKMAP_BASE ((FIXADDR_START - LAST_PKMAP * PAGE_SIZE) & PMD_MASK)
+#ifdef CONFIG_HIGHMEM
+# define VMALLOC_END	(PKMAP_BASE-2*PAGE_SIZE)
+#else
+# define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
+#endif
+
+#define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED)
+
+/*
+ * The i386 can't do page protection for execute, and considers that the same
+ * are read.
+ * Also, write permissions imply read permissions. This is the closest we can
+ * get..
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page)
+
+#define pte_clear(mm,addr,xp) pte_set_val(*(xp), (phys_t) 0, __pgprot(_PAGE_NEWPAGE))
+
+#define pmd_none(x)	(!((unsigned long)pmd_val(x) & ~_PAGE_NEWPAGE))
+#define	pmd_bad(x)	((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+
+#define pmd_present(x)	(pmd_val(x) & _PAGE_PRESENT)
+#define pmd_clear(xp)	do { pmd_val(*(xp)) = _PAGE_NEWPAGE; } while (0)
+
+#define pmd_newpage(x)  (pmd_val(x) & _PAGE_NEWPAGE)
+#define pmd_mkuptodate(x) (pmd_val(x) &= ~_PAGE_NEWPAGE)
+
+#define pud_newpage(x)  (pud_val(x) & _PAGE_NEWPAGE)
+#define pud_mkuptodate(x) (pud_val(x) &= ~_PAGE_NEWPAGE)
+
+#define pmd_page(pmd) phys_to_page(pmd_val(pmd) & PAGE_MASK)
+
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+#define pte_present(x)	pte_get_bits(x, (_PAGE_PRESENT | _PAGE_PROTNONE))
+
+/*
+ * =================================
+ * Flags checking section.
+ * =================================
+ */
+
+static inline int pte_none(pte_t pte)
+{
+	return pte_is_zero(pte);
+}
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte)
+{ 
+	return((pte_get_bits(pte, _PAGE_USER)) &&
+	       !(pte_get_bits(pte, _PAGE_PROTNONE)));
+}
+
+static inline int pte_exec(pte_t pte){
+	return((pte_get_bits(pte, _PAGE_USER)) &&
+	       !(pte_get_bits(pte, _PAGE_PROTNONE)));
+}
+
+static inline int pte_write(pte_t pte)
+{
+	return((pte_get_bits(pte, _PAGE_RW)) &&
+	       !(pte_get_bits(pte, _PAGE_PROTNONE)));
+}
+
+/*
+ * The following only works if pte_present() is not true.
+ */
+static inline int pte_file(pte_t pte)
+{
+	return pte_get_bits(pte, _PAGE_FILE);
+}
+
+static inline int pte_dirty(pte_t pte)
+{
+	return pte_get_bits(pte, _PAGE_DIRTY);
+}
+
+static inline int pte_young(pte_t pte)
+{
+	return pte_get_bits(pte, _PAGE_ACCESSED);
+}
+
+static inline int pte_newpage(pte_t pte)
+{
+	return pte_get_bits(pte, _PAGE_NEWPAGE);
+}
+
+static inline int pte_newprot(pte_t pte)
+{ 
+	return(pte_present(pte) && (pte_get_bits(pte, _PAGE_NEWPROT)));
+}
+
+static inline int pte_special(pte_t pte)
+{
+	return 0;
+}
+
+/*
+ * =================================
+ * Flags setting section.
+ * =================================
+ */
+
+static inline pte_t pte_mknewprot(pte_t pte)
+{
+	pte_set_bits(pte, _PAGE_NEWPROT);
+	return(pte);
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	pte_clear_bits(pte, _PAGE_DIRTY);
+	return(pte);
+}
+
+static inline pte_t pte_mkold(pte_t pte)	
+{ 
+	pte_clear_bits(pte, _PAGE_ACCESSED);
+	return(pte);
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{ 
+	pte_clear_bits(pte, _PAGE_RW);
+	return(pte_mknewprot(pte)); 
+}
+
+static inline pte_t pte_mkread(pte_t pte)
+{ 
+	pte_set_bits(pte, _PAGE_USER);
+	return(pte_mknewprot(pte)); 
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{ 
+	pte_set_bits(pte, _PAGE_DIRTY);
+	return(pte);
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	pte_set_bits(pte, _PAGE_ACCESSED);
+	return(pte);
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)	
+{
+	pte_set_bits(pte, _PAGE_RW);
+	return(pte_mknewprot(pte)); 
+}
+
+static inline pte_t pte_mkuptodate(pte_t pte)	
+{
+	pte_clear_bits(pte, _PAGE_NEWPAGE);
+	if(pte_present(pte))
+		pte_clear_bits(pte, _PAGE_NEWPROT);
+	return(pte); 
+}
+
+static inline pte_t pte_mknewpage(pte_t pte)
+{
+	pte_set_bits(pte, _PAGE_NEWPAGE);
+	return(pte);
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return(pte);
+}
+
+static inline void set_pte(pte_t *pteptr, pte_t pteval)
+{
+	pte_copy(*pteptr, pteval);
+
+	/* If it's a swap entry, it needs to be marked _PAGE_NEWPAGE so
+	 * fix_range knows to unmap it.  _PAGE_NEWPROT is specific to
+	 * mapped pages.
+	 */
+
+	*pteptr = pte_mknewpage(*pteptr);
+	if(pte_present(*pteptr)) *pteptr = pte_mknewprot(*pteptr);
+}
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define phys_to_page(phys) pfn_to_page(phys_to_pfn(phys))
+#define __virt_to_page(virt) phys_to_page(__pa(virt))
+#define page_to_phys(page) pfn_to_phys((pfn_t) page_to_pfn(page))
+#define virt_to_page(addr) __virt_to_page((const unsigned long) addr)
+
+#define mk_pte(page, pgprot) \
+	({ pte_t pte;					\
+							\
+	pte_set_val(pte, page_to_phys(page), (pgprot));	\
+	if (pte_present(pte))				\
+		pte_mknewprot(pte_mknewpage(pte));	\
+	pte;})
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_set_val(pte, (pte_val(pte) & _PAGE_CHG_MASK), newprot);
+	return pte; 
+}
+
+/*
+ * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
+ *
+ * this macro returns the index of the entry in the pgd page which would
+ * control the given virtual address
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * this macro returns the index of the entry in the pmd page which would
+ * control the given virtual address
+ */
+#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+#define pmd_page_vaddr(pmd) \
+	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+	((pte_t *) pmd_page_vaddr(*(dir)) +  pte_index(address))
+#define pte_offset_map(dir, address) \
+	((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+
+struct mm_struct;
+extern pte_t *virt_to_pte(struct mm_struct *mm, unsigned long addr);
+
+#define update_mmu_cache(vma,address,pte) do ; while (0)
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x)			(((x).val >> 4) & 0x3f)
+#define __swp_offset(x)			((x).val >> 11)
+
+#define __swp_entry(type, offset) \
+	((swp_entry_t) { ((type) << 4) | ((offset) << 11) })
+#define __pte_to_swp_entry(pte) \
+	((swp_entry_t) { pte_val(pte_mkuptodate(pte)) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+#define kern_addr_valid(addr) (1)
+
+#include <asm-generic/pgtable.h>
+
+/* Clear a kernel PTE and flush it from the TLB */
+#define kpte_clear_flush(ptep, vaddr)		\
+do {						\
+	pte_clear(&init_mm, (vaddr), (ptep));	\
+	__flush_tlb_one((vaddr));		\
+} while (0)
+
+#endif
diff --git a/include/asm-um/processor-generic.h b/arch/um/include/asm/processor-generic.h
similarity index 100%
rename from include/asm-um/processor-generic.h
rename to arch/um/include/asm/processor-generic.h
diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h
new file mode 100644
index 0000000..6c88990
--- /dev/null
+++ b/arch/um/include/asm/ptrace-generic.h
@@ -0,0 +1,55 @@
+/* 
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PTRACE_GENERIC_H
+#define __UM_PTRACE_GENERIC_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace-abi.h>
+#include <asm/user.h>
+#include "sysdep/ptrace.h"
+
+struct pt_regs {
+	struct uml_pt_regs regs;
+};
+
+#define EMPTY_REGS { .regs = EMPTY_UML_PT_REGS }
+
+#define PT_REGS_IP(r) UPT_IP(&(r)->regs)
+#define PT_REGS_SP(r) UPT_SP(&(r)->regs)
+
+#define PT_REG(r, reg) UPT_REG(&(r)->regs, reg)
+#define PT_REGS_SET(r, reg, val) UPT_SET(&(r)->regs, reg, val)
+
+#define PT_REGS_SET_SYSCALL_RETURN(r, res) \
+	UPT_SET_SYSCALL_RETURN(&(r)->regs, res)
+#define PT_REGS_RESTART_SYSCALL(r) UPT_RESTART_SYSCALL(&(r)->regs)
+
+#define PT_REGS_SYSCALL_NR(r) UPT_SYSCALL_NR(&(r)->regs)
+
+#define PT_REGS_SC(r) UPT_SC(&(r)->regs)
+
+#define instruction_pointer(regs) PT_REGS_IP(regs)
+
+struct task_struct;
+
+extern long subarch_ptrace(struct task_struct *child, long request, long addr,
+			   long data);
+extern unsigned long getreg(struct task_struct *child, int regno);
+extern int putreg(struct task_struct *child, int regno, unsigned long value);
+extern int get_fpregs(struct user_i387_struct __user *buf,
+		      struct task_struct *child);
+extern int set_fpregs(struct user_i387_struct __user *buf,
+		      struct task_struct *child);
+
+extern void show_regs(struct pt_regs *regs);
+
+extern int arch_copy_tls(struct task_struct *new);
+extern void clear_flushed_tls(struct task_struct *task);
+
+#endif
+
+#endif
diff --git a/include/asm-um/required-features.h b/arch/um/include/asm/required-features.h
similarity index 100%
rename from include/asm-um/required-features.h
rename to arch/um/include/asm/required-features.h
diff --git a/include/asm-um/sections.h b/arch/um/include/asm/sections.h
similarity index 100%
rename from include/asm-um/sections.h
rename to arch/um/include/asm/sections.h
diff --git a/include/asm-um/segment.h b/arch/um/include/asm/segment.h
similarity index 100%
rename from include/asm-um/segment.h
rename to arch/um/include/asm/segment.h
diff --git a/include/asm-um/setup.h b/arch/um/include/asm/setup.h
similarity index 100%
rename from include/asm-um/setup.h
rename to arch/um/include/asm/setup.h
diff --git a/include/asm-um/smp.h b/arch/um/include/asm/smp.h
similarity index 100%
rename from include/asm-um/smp.h
rename to arch/um/include/asm/smp.h
diff --git a/include/asm-um/suspend.h b/arch/um/include/asm/suspend.h
similarity index 100%
rename from include/asm-um/suspend.h
rename to arch/um/include/asm/suspend.h
diff --git a/arch/um/include/asm/system.h b/arch/um/include/asm/system.h
new file mode 100644
index 0000000..753346e
--- /dev/null
+++ b/arch/um/include/asm/system.h
@@ -0,0 +1,35 @@
+#ifndef __UM_SYSTEM_GENERIC_H
+#define __UM_SYSTEM_GENERIC_H
+
+#include "sysdep/system.h"
+
+extern void *switch_to(void *prev, void *next, void *last);
+
+extern int get_signals(void);
+extern int set_signals(int enable);
+extern int get_signals(void);
+extern void block_signals(void);
+extern void unblock_signals(void);
+
+#define local_save_flags(flags) do { typecheck(unsigned long, flags); \
+				     (flags) = get_signals(); } while(0)
+#define local_irq_restore(flags) do { typecheck(unsigned long, flags); \
+				      set_signals(flags); } while(0)
+
+#define local_irq_save(flags) do { local_save_flags(flags); \
+                                   local_irq_disable(); } while(0)
+
+#define local_irq_enable() unblock_signals()
+#define local_irq_disable() block_signals()
+
+#define irqs_disabled()                 \
+({                                      \
+        unsigned long flags;            \
+        local_save_flags(flags);        \
+        (flags == 0);                   \
+})
+
+extern void *_switch_to(void *prev, void *next, void *last);
+#define switch_to(prev, next, last) prev = _switch_to(prev, next, last)
+
+#endif
diff --git a/include/asm-um/thread_info.h b/arch/um/include/asm/thread_info.h
similarity index 100%
rename from include/asm-um/thread_info.h
rename to arch/um/include/asm/thread_info.h
diff --git a/include/asm-um/timex.h b/arch/um/include/asm/timex.h
similarity index 100%
rename from include/asm-um/timex.h
rename to arch/um/include/asm/timex.h
diff --git a/include/asm-um/tlb.h b/arch/um/include/asm/tlb.h
similarity index 100%
rename from include/asm-um/tlb.h
rename to arch/um/include/asm/tlb.h
diff --git a/include/asm-um/tlbflush.h b/arch/um/include/asm/tlbflush.h
similarity index 100%
rename from include/asm-um/tlbflush.h
rename to arch/um/include/asm/tlbflush.h
diff --git a/include/asm-um/topology.h b/arch/um/include/asm/topology.h
similarity index 100%
rename from include/asm-um/topology.h
rename to arch/um/include/asm/topology.h
diff --git a/include/asm-um/uaccess.h b/arch/um/include/asm/uaccess.h
similarity index 100%
rename from include/asm-um/uaccess.h
rename to arch/um/include/asm/uaccess.h
diff --git a/include/asm-um/xor.h b/arch/um/include/asm/xor.h
similarity index 100%
rename from include/asm-um/xor.h
rename to arch/um/include/asm/xor.h
diff --git a/arch/um/include/common-offsets.h b/arch/um/include/common-offsets.h
deleted file mode 100644
index b54bd35..0000000
--- a/arch/um/include/common-offsets.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* for use by sys-$SUBARCH/kernel-offsets.c */
-
-DEFINE(KERNEL_MADV_REMOVE, MADV_REMOVE);
-
-OFFSET(HOST_TASK_REGS, task_struct, thread.regs);
-OFFSET(HOST_TASK_PID, task_struct, pid);
-
-DEFINE(UM_KERN_PAGE_SIZE, PAGE_SIZE);
-DEFINE(UM_KERN_PAGE_MASK, PAGE_MASK);
-DEFINE(UM_KERN_PAGE_SHIFT, PAGE_SHIFT);
-DEFINE(UM_NSEC_PER_SEC, NSEC_PER_SEC);
-
-DEFINE_STR(UM_KERN_EMERG, KERN_EMERG);
-DEFINE_STR(UM_KERN_ALERT, KERN_ALERT);
-DEFINE_STR(UM_KERN_CRIT, KERN_CRIT);
-DEFINE_STR(UM_KERN_ERR, KERN_ERR);
-DEFINE_STR(UM_KERN_WARNING, KERN_WARNING);
-DEFINE_STR(UM_KERN_NOTICE, KERN_NOTICE);
-DEFINE_STR(UM_KERN_INFO, KERN_INFO);
-DEFINE_STR(UM_KERN_DEBUG, KERN_DEBUG);
-DEFINE_STR(UM_KERN_CONT, KERN_CONT);
-
-DEFINE(UM_ELF_CLASS, ELF_CLASS);
-DEFINE(UM_ELFCLASS32, ELFCLASS32);
-DEFINE(UM_ELFCLASS64, ELFCLASS64);
-
-DEFINE(UM_NR_CPUS, NR_CPUS);
-
-DEFINE(UM_GFP_KERNEL, GFP_KERNEL);
-DEFINE(UM_GFP_ATOMIC, GFP_ATOMIC);
-
-/* For crypto assembler code. */
-DEFINE(crypto_tfm_ctx_offset, offsetof(struct crypto_tfm, __crt_ctx));
-
-DEFINE(UM_THREAD_SIZE, THREAD_SIZE);
-
-DEFINE(UM_HZ, HZ);
-
-DEFINE(UM_USEC_PER_SEC, USEC_PER_SEC);
-DEFINE(UM_NSEC_PER_SEC, NSEC_PER_SEC);
-DEFINE(UM_NSEC_PER_USEC, NSEC_PER_USEC);
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
deleted file mode 100644
index db5be46..0000000
--- a/arch/um/include/os.h
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __OS_H__
-#define __OS_H__
-
-#include <stdarg.h>
-#include "irq_user.h"
-#include "longjmp.h"
-#include "mm_id.h"
-#include "sysdep/tls.h"
-#include "../os/include/file.h"
-
-#define CATCH_EINTR(expr) while ((errno = 0, ((expr) < 0)) && (errno == EINTR))
-
-#define OS_TYPE_FILE 1
-#define OS_TYPE_DIR 2
-#define OS_TYPE_SYMLINK 3
-#define OS_TYPE_CHARDEV 4
-#define OS_TYPE_BLOCKDEV 5
-#define OS_TYPE_FIFO 6
-#define OS_TYPE_SOCK 7
-
-/* os_access() flags */
-#define OS_ACC_F_OK    0       /* Test for existence.  */
-#define OS_ACC_X_OK    1       /* Test for execute permission.  */
-#define OS_ACC_W_OK    2       /* Test for write permission.  */
-#define OS_ACC_R_OK    4       /* Test for read permission.  */
-#define OS_ACC_RW_OK   (OS_ACC_W_OK | OS_ACC_R_OK) /* Test for RW permission */
-
-/*
- * types taken from stat_file() in hostfs_user.c
- * (if they are wrong here, they are wrong there...).
- */
-struct uml_stat {
-	int                ust_dev;        /* device */
-	unsigned long long ust_ino;        /* inode */
-	int                ust_mode;       /* protection */
-	int                ust_nlink;      /* number of hard links */
-	int                ust_uid;        /* user ID of owner */
-	int                ust_gid;        /* group ID of owner */
-	unsigned long long ust_size;       /* total size, in bytes */
-	int                ust_blksize;    /* blocksize for filesystem I/O */
-	unsigned long long ust_blocks;     /* number of blocks allocated */
-	unsigned long      ust_atime;      /* time of last access */
-	unsigned long      ust_mtime;      /* time of last modification */
-	unsigned long      ust_ctime;      /* time of last change */
-};
-
-struct openflags {
-	unsigned int r : 1;
-	unsigned int w : 1;
-	unsigned int s : 1;	/* O_SYNC */
-	unsigned int c : 1;	/* O_CREAT */
-	unsigned int t : 1;	/* O_TRUNC */
-	unsigned int a : 1;	/* O_APPEND */
-	unsigned int e : 1;	/* O_EXCL */
-	unsigned int cl : 1;    /* FD_CLOEXEC */
-};
-
-#define OPENFLAGS() ((struct openflags) { .r = 0, .w = 0, .s = 0, .c = 0, \
-					  .t = 0, .a = 0, .e = 0, .cl = 0 })
-
-static inline struct openflags of_read(struct openflags flags)
-{
-	flags.r = 1;
-	return flags;
-}
-
-static inline struct openflags of_write(struct openflags flags)
-{
-	flags.w = 1;
-	return flags;
-}
-
-static inline struct openflags of_rdwr(struct openflags flags)
-{
-	return of_read(of_write(flags));
-}
-
-static inline struct openflags of_set_rw(struct openflags flags, int r, int w)
-{
-	flags.r = r;
-	flags.w = w;
-	return flags;
-}
-
-static inline struct openflags of_sync(struct openflags flags)
-{
-	flags.s = 1;
-	return flags;
-}
-
-static inline struct openflags of_create(struct openflags flags)
-{
-	flags.c = 1;
-	return flags;
-}
-
-static inline struct openflags of_trunc(struct openflags flags)
-{
-	flags.t = 1;
-	return flags;
-}
-
-static inline struct openflags of_append(struct openflags flags)
-{
-	flags.a = 1;
-	return flags;
-}
-
-static inline struct openflags of_excl(struct openflags flags)
-{
-	flags.e = 1;
-	return flags;
-}
-
-static inline struct openflags of_cloexec(struct openflags flags)
-{
-	flags.cl = 1;
-	return flags;
-}
-
-/* file.c */
-extern int os_stat_file(const char *file_name, struct uml_stat *buf);
-extern int os_stat_fd(const int fd, struct uml_stat *buf);
-extern int os_access(const char *file, int mode);
-extern int os_set_exec_close(int fd);
-extern int os_ioctl_generic(int fd, unsigned int cmd, unsigned long arg);
-extern int os_get_ifname(int fd, char *namebuf);
-extern int os_set_slip(int fd);
-extern int os_mode_fd(int fd, int mode);
-
-extern int os_seek_file(int fd, unsigned long long offset);
-extern int os_open_file(const char *file, struct openflags flags, int mode);
-extern int os_read_file(int fd, void *buf, int len);
-extern int os_write_file(int fd, const void *buf, int count);
-extern int os_file_size(const char *file, unsigned long long *size_out);
-extern int os_file_modtime(const char *file, unsigned long *modtime);
-extern int os_pipe(int *fd, int stream, int close_on_exec);
-extern int os_set_fd_async(int fd);
-extern int os_clear_fd_async(int fd);
-extern int os_set_fd_block(int fd, int blocking);
-extern int os_accept_connection(int fd);
-extern int os_create_unix_socket(const char *file, int len, int close_on_exec);
-extern int os_shutdown_socket(int fd, int r, int w);
-extern void os_close_file(int fd);
-extern int os_rcv_fd(int fd, int *helper_pid_out);
-extern int create_unix_socket(char *file, int len, int close_on_exec);
-extern int os_connect_socket(const char *name);
-extern int os_file_type(char *file);
-extern int os_file_mode(const char *file, struct openflags *mode_out);
-extern int os_lock_file(int fd, int excl);
-extern void os_flush_stdout(void);
-extern int os_stat_filesystem(char *path, long *bsize_out,
-			      long long *blocks_out, long long *bfree_out,
-			      long long *bavail_out, long long *files_out,
-			      long long *ffree_out, void *fsid_out,
-			      int fsid_size, long *namelen_out,
-			      long *spare_out);
-extern int os_change_dir(char *dir);
-extern int os_fchange_dir(int fd);
-
-/* start_up.c */
-extern void os_early_checks(void);
-extern void can_do_skas(void);
-extern void os_check_bugs(void);
-extern void check_host_supports_tls(int *supports_tls, int *tls_min);
-
-/* mem.c */
-extern int create_mem_file(unsigned long long len);
-
-/* process.c */
-extern unsigned long os_process_pc(int pid);
-extern int os_process_parent(int pid);
-extern void os_stop_process(int pid);
-extern void os_kill_process(int pid, int reap_child);
-extern void os_kill_ptraced_process(int pid, int reap_child);
-extern long os_ptrace_ldt(long pid, long addr, long data);
-
-extern int os_getpid(void);
-extern int os_getpgrp(void);
-
-extern void init_new_thread_signals(void);
-extern int run_kernel_thread(int (*fn)(void *), void *arg, jmp_buf **jmp_ptr);
-
-extern int os_map_memory(void *virt, int fd, unsigned long long off,
-			 unsigned long len, int r, int w, int x);
-extern int os_protect_memory(void *addr, unsigned long len,
-			     int r, int w, int x);
-extern int os_unmap_memory(void *addr, int len);
-extern int os_drop_memory(void *addr, int length);
-extern int can_drop_memory(void);
-extern void os_flush_stdout(void);
-
-/* uaccess.c */
-extern unsigned long __do_user_copy(void *to, const void *from, int n,
-				    void **fault_addr, jmp_buf **fault_catcher,
-				    void (*op)(void *to, const void *from,
-					       int n), int *faulted_out);
-
-/* execvp.c */
-extern int execvp_noalloc(char *buf, const char *file, char *const argv[]);
-/* helper.c */
-extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv);
-extern int run_helper_thread(int (*proc)(void *), void *arg,
-			     unsigned int flags, unsigned long *stack_out);
-extern int helper_wait(int pid);
-
-
-/* tls.c */
-extern int os_set_thread_area(user_desc_t *info, int pid);
-extern int os_get_thread_area(user_desc_t *info, int pid);
-
-/* umid.c */
-extern int umid_file_name(char *name, char *buf, int len);
-extern int set_umid(char *name);
-extern char *get_umid(void);
-
-/* signal.c */
-extern void timer_init(void);
-extern void set_sigstack(void *sig_stack, int size);
-extern void remove_sigstack(void);
-extern void set_handler(int sig, void (*handler)(int), int flags, ...);
-extern int change_sig(int signal, int on);
-extern void block_signals(void);
-extern void unblock_signals(void);
-extern int get_signals(void);
-extern int set_signals(int enable);
-
-/* util.c */
-extern void stack_protections(unsigned long address);
-extern int raw(int fd);
-extern void setup_machinename(char *machine_out);
-extern void setup_hostinfo(char *buf, int len);
-extern void os_dump_core(void) __attribute__ ((noreturn));
-
-/* time.c */
-extern void idle_sleep(unsigned long long nsecs);
-extern int set_interval(void);
-extern int timer_one_shot(int ticks);
-extern long long disable_timer(void);
-extern void uml_idle_timer(void);
-extern long long os_nsecs(void);
-
-/* skas/mem.c */
-extern long run_syscall_stub(struct mm_id * mm_idp,
-			     int syscall, unsigned long *args, long expected,
-			     void **addr, int done);
-extern long syscall_stub_data(struct mm_id * mm_idp,
-			      unsigned long *data, int data_count,
-			      void **addr, void **stub_addr);
-extern int map(struct mm_id * mm_idp, unsigned long virt,
-	       unsigned long len, int prot, int phys_fd,
-	       unsigned long long offset, int done, void **data);
-extern int unmap(struct mm_id * mm_idp, unsigned long addr, unsigned long len,
-		 int done, void **data);
-extern int protect(struct mm_id * mm_idp, unsigned long addr,
-		   unsigned long len, unsigned int prot, int done, void **data);
-
-/* skas/process.c */
-extern int is_skas_winch(int pid, int fd, void *data);
-extern int start_userspace(unsigned long stub_stack);
-extern int copy_context_skas0(unsigned long stack, int pid);
-extern void userspace(struct uml_pt_regs *regs);
-extern int map_stub_pages(int fd, unsigned long code, unsigned long data,
-			  unsigned long stack);
-extern void new_thread(void *stack, jmp_buf *buf, void (*handler)(void));
-extern void switch_threads(jmp_buf *me, jmp_buf *you);
-extern int start_idle_thread(void *stack, jmp_buf *switch_buf);
-extern void initial_thread_cb_skas(void (*proc)(void *),
-				 void *arg);
-extern void halt_skas(void);
-extern void reboot_skas(void);
-
-/* irq.c */
-extern int os_waiting_for_events(struct irq_fd *active_fds);
-extern int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds);
-extern void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg,
-		struct irq_fd *active_fds, struct irq_fd ***last_irq_ptr2);
-extern void os_free_irq_later(struct irq_fd *active_fds,
-		int irq, void *dev_id);
-extern int os_get_pollfd(int i);
-extern void os_set_pollfd(int i, int fd);
-extern void os_set_ioignore(void);
-
-/* sigio.c */
-extern int add_sigio_fd(int fd);
-extern int ignore_sigio_fd(int fd);
-extern void maybe_sigio_broken(int fd, int read);
-extern void sigio_broken(int fd, int read);
-
-/* sys-x86_64/prctl.c */
-extern int os_arch_prctl(int pid, int code, unsigned long *addr);
-
-/* tty.c */
-extern int get_pty(void);
-
-/* sys-$ARCH/task_size.c */
-extern unsigned long os_get_top_address(void);
-
-#endif
diff --git a/arch/um/include/aio.h b/arch/um/include/shared/aio.h
similarity index 100%
rename from arch/um/include/aio.h
rename to arch/um/include/shared/aio.h
diff --git a/arch/um/include/arch.h b/arch/um/include/shared/arch.h
similarity index 100%
rename from arch/um/include/arch.h
rename to arch/um/include/shared/arch.h
diff --git a/arch/um/include/shared/as-layout.h b/arch/um/include/shared/as-layout.h
new file mode 100644
index 0000000..a92b678
--- /dev/null
+++ b/arch/um/include/shared/as-layout.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __START_H__
+#define __START_H__
+
+#include "kern_constants.h"
+
+/*
+ * Stolen from linux/const.h, which can't be directly included since
+ * this is used in userspace code, which has no access to the kernel
+ * headers.  Changed to be suitable for adding casts to the start,
+ * rather than "UL" to the end.
+ */
+
+/* Some constant macros are used in both assembler and
+ * C code.  Therefore we cannot annotate them always with
+ * 'UL' and other type specifiers unilaterally.  We
+ * use the following macros to deal with this.
+ */
+
+#ifdef __ASSEMBLY__
+#define _UML_AC(X, Y)	(Y)
+#else
+#define __UML_AC(X, Y)	(X(Y))
+#define _UML_AC(X, Y)	__UML_AC(X, Y)
+#endif
+
+#define STUB_START _UML_AC(, 0x100000)
+#define STUB_CODE _UML_AC((unsigned long), STUB_START)
+#define STUB_DATA _UML_AC((unsigned long), STUB_CODE + UM_KERN_PAGE_SIZE)
+#define STUB_END _UML_AC((unsigned long), STUB_DATA + UM_KERN_PAGE_SIZE)
+
+#ifndef __ASSEMBLY__
+
+#include "sysdep/ptrace.h"
+
+struct cpu_task {
+	int pid;
+	void *task;
+};
+
+extern struct cpu_task cpu_tasks[];
+
+extern unsigned long low_physmem;
+extern unsigned long high_physmem;
+extern unsigned long uml_physmem;
+extern unsigned long uml_reserved;
+extern unsigned long end_vm;
+extern unsigned long start_vm;
+extern unsigned long long highmem;
+
+extern unsigned long _stext, _etext, _sdata, _edata, __bss_start, _end;
+extern unsigned long _unprotected_end;
+extern unsigned long brk_start;
+
+extern unsigned long host_task_size;
+
+extern int linux_main(int argc, char **argv);
+
+extern void (*sig_info[])(int, struct uml_pt_regs *);
+
+#endif
+
+#endif
diff --git a/arch/um/include/chan_kern.h b/arch/um/include/shared/chan_kern.h
similarity index 100%
rename from arch/um/include/chan_kern.h
rename to arch/um/include/shared/chan_kern.h
diff --git a/arch/um/include/chan_user.h b/arch/um/include/shared/chan_user.h
similarity index 100%
rename from arch/um/include/chan_user.h
rename to arch/um/include/shared/chan_user.h
diff --git a/arch/um/include/shared/common-offsets.h b/arch/um/include/shared/common-offsets.h
new file mode 100644
index 0000000..72009c7
--- /dev/null
+++ b/arch/um/include/shared/common-offsets.h
@@ -0,0 +1,54 @@
+/* for use by sys-$SUBARCH/kernel-offsets.c */
+
+DEFINE(KERNEL_MADV_REMOVE, MADV_REMOVE);
+
+OFFSET(HOST_TASK_REGS, task_struct, thread.regs);
+OFFSET(HOST_TASK_PID, task_struct, pid);
+
+DEFINE(UM_KERN_PAGE_SIZE, PAGE_SIZE);
+DEFINE(UM_KERN_PAGE_MASK, PAGE_MASK);
+DEFINE(UM_KERN_PAGE_SHIFT, PAGE_SHIFT);
+DEFINE(UM_NSEC_PER_SEC, NSEC_PER_SEC);
+
+DEFINE_STR(UM_KERN_EMERG, KERN_EMERG);
+DEFINE_STR(UM_KERN_ALERT, KERN_ALERT);
+DEFINE_STR(UM_KERN_CRIT, KERN_CRIT);
+DEFINE_STR(UM_KERN_ERR, KERN_ERR);
+DEFINE_STR(UM_KERN_WARNING, KERN_WARNING);
+DEFINE_STR(UM_KERN_NOTICE, KERN_NOTICE);
+DEFINE_STR(UM_KERN_INFO, KERN_INFO);
+DEFINE_STR(UM_KERN_DEBUG, KERN_DEBUG);
+DEFINE_STR(UM_KERN_CONT, KERN_CONT);
+
+DEFINE(UM_ELF_CLASS, ELF_CLASS);
+DEFINE(UM_ELFCLASS32, ELFCLASS32);
+DEFINE(UM_ELFCLASS64, ELFCLASS64);
+
+DEFINE(UM_NR_CPUS, NR_CPUS);
+
+DEFINE(UM_GFP_KERNEL, GFP_KERNEL);
+DEFINE(UM_GFP_ATOMIC, GFP_ATOMIC);
+
+/* For crypto assembler code. */
+DEFINE(crypto_tfm_ctx_offset, offsetof(struct crypto_tfm, __crt_ctx));
+
+DEFINE(UM_THREAD_SIZE, THREAD_SIZE);
+
+DEFINE(UM_HZ, HZ);
+
+DEFINE(UM_USEC_PER_SEC, USEC_PER_SEC);
+DEFINE(UM_NSEC_PER_SEC, NSEC_PER_SEC);
+DEFINE(UM_NSEC_PER_USEC, NSEC_PER_USEC);
+
+#ifdef CONFIG_PRINTK
+DEFINE(UML_CONFIG_PRINTK, CONFIG_PRINTK);
+#endif
+#ifdef CONFIG_NO_HZ
+DEFINE(UML_CONFIG_NO_HZ, CONFIG_NO_HZ);
+#endif
+#ifdef CONFIG_UML_X86
+DEFINE(UML_CONFIG_UML_X86, CONFIG_UML_X86);
+#endif
+#ifdef CONFIG_64BIT
+DEFINE(UML_CONFIG_64BIT, CONFIG_64BIT);
+#endif
diff --git a/arch/um/include/elf_user.h b/arch/um/include/shared/elf_user.h
similarity index 100%
rename from arch/um/include/elf_user.h
rename to arch/um/include/shared/elf_user.h
diff --git a/arch/um/include/frame_kern.h b/arch/um/include/shared/frame_kern.h
similarity index 100%
rename from arch/um/include/frame_kern.h
rename to arch/um/include/shared/frame_kern.h
diff --git a/arch/um/include/init.h b/arch/um/include/shared/init.h
similarity index 100%
rename from arch/um/include/init.h
rename to arch/um/include/shared/init.h
diff --git a/arch/um/include/initrd.h b/arch/um/include/shared/initrd.h
similarity index 100%
rename from arch/um/include/initrd.h
rename to arch/um/include/shared/initrd.h
diff --git a/arch/um/include/irq_kern.h b/arch/um/include/shared/irq_kern.h
similarity index 100%
rename from arch/um/include/irq_kern.h
rename to arch/um/include/shared/irq_kern.h
diff --git a/arch/um/include/irq_user.h b/arch/um/include/shared/irq_user.h
similarity index 100%
rename from arch/um/include/irq_user.h
rename to arch/um/include/shared/irq_user.h
diff --git a/arch/um/include/kern.h b/arch/um/include/shared/kern.h
similarity index 100%
rename from arch/um/include/kern.h
rename to arch/um/include/shared/kern.h
diff --git a/arch/um/include/kern_util.h b/arch/um/include/shared/kern_util.h
similarity index 100%
rename from arch/um/include/kern_util.h
rename to arch/um/include/shared/kern_util.h
diff --git a/arch/um/include/shared/ldt.h b/arch/um/include/shared/ldt.h
new file mode 100644
index 0000000..a7f999a
--- /dev/null
+++ b/arch/um/include/shared/ldt.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
+ * Licensed under the GPL
+ *
+ * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
+ */
+
+#ifndef __ASM_LDT_H
+#define __ASM_LDT_H
+
+#include <linux/mutex.h>
+#include <sysdep/host_ldt.h>
+
+extern void ldt_host_info(void);
+
+#define LDT_PAGES_MAX \
+	((LDT_ENTRIES * LDT_ENTRY_SIZE)/PAGE_SIZE)
+#define LDT_ENTRIES_PER_PAGE \
+	(PAGE_SIZE/LDT_ENTRY_SIZE)
+#define LDT_DIRECT_ENTRIES \
+	((LDT_PAGES_MAX*sizeof(void *))/LDT_ENTRY_SIZE)
+
+struct ldt_entry {
+	__u32 a;
+	__u32 b;
+};
+
+typedef struct uml_ldt {
+	int entry_count;
+	struct mutex lock;
+	union {
+		struct ldt_entry * pages[LDT_PAGES_MAX];
+		struct ldt_entry entries[LDT_DIRECT_ENTRIES];
+	} u;
+} uml_ldt_t;
+
+#endif
diff --git a/arch/um/include/line.h b/arch/um/include/shared/line.h
similarity index 100%
rename from arch/um/include/line.h
rename to arch/um/include/shared/line.h
diff --git a/arch/um/include/longjmp.h b/arch/um/include/shared/longjmp.h
similarity index 100%
rename from arch/um/include/longjmp.h
rename to arch/um/include/shared/longjmp.h
diff --git a/arch/um/include/mconsole.h b/arch/um/include/shared/mconsole.h
similarity index 100%
rename from arch/um/include/mconsole.h
rename to arch/um/include/shared/mconsole.h
diff --git a/arch/um/include/mconsole_kern.h b/arch/um/include/shared/mconsole_kern.h
similarity index 100%
rename from arch/um/include/mconsole_kern.h
rename to arch/um/include/shared/mconsole_kern.h
diff --git a/arch/um/include/mem.h b/arch/um/include/shared/mem.h
similarity index 100%
rename from arch/um/include/mem.h
rename to arch/um/include/shared/mem.h
diff --git a/arch/um/include/mem_kern.h b/arch/um/include/shared/mem_kern.h
similarity index 100%
rename from arch/um/include/mem_kern.h
rename to arch/um/include/shared/mem_kern.h
diff --git a/arch/um/include/mem_user.h b/arch/um/include/shared/mem_user.h
similarity index 100%
rename from arch/um/include/mem_user.h
rename to arch/um/include/shared/mem_user.h
diff --git a/arch/um/include/net_kern.h b/arch/um/include/shared/net_kern.h
similarity index 100%
rename from arch/um/include/net_kern.h
rename to arch/um/include/shared/net_kern.h
diff --git a/arch/um/include/net_user.h b/arch/um/include/shared/net_user.h
similarity index 100%
rename from arch/um/include/net_user.h
rename to arch/um/include/shared/net_user.h
diff --git a/arch/um/include/shared/os.h b/arch/um/include/shared/os.h
new file mode 100644
index 0000000..cd40fdd
--- /dev/null
+++ b/arch/um/include/shared/os.h
@@ -0,0 +1,303 @@
+/*
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __OS_H__
+#define __OS_H__
+
+#include <stdarg.h>
+#include "irq_user.h"
+#include "longjmp.h"
+#include "mm_id.h"
+#include "sysdep/tls.h"
+
+#define CATCH_EINTR(expr) while ((errno = 0, ((expr) < 0)) && (errno == EINTR))
+
+#define OS_TYPE_FILE 1
+#define OS_TYPE_DIR 2
+#define OS_TYPE_SYMLINK 3
+#define OS_TYPE_CHARDEV 4
+#define OS_TYPE_BLOCKDEV 5
+#define OS_TYPE_FIFO 6
+#define OS_TYPE_SOCK 7
+
+/* os_access() flags */
+#define OS_ACC_F_OK    0       /* Test for existence.  */
+#define OS_ACC_X_OK    1       /* Test for execute permission.  */
+#define OS_ACC_W_OK    2       /* Test for write permission.  */
+#define OS_ACC_R_OK    4       /* Test for read permission.  */
+#define OS_ACC_RW_OK   (OS_ACC_W_OK | OS_ACC_R_OK) /* Test for RW permission */
+
+/*
+ * types taken from stat_file() in hostfs_user.c
+ * (if they are wrong here, they are wrong there...).
+ */
+struct uml_stat {
+	int                ust_dev;        /* device */
+	unsigned long long ust_ino;        /* inode */
+	int                ust_mode;       /* protection */
+	int                ust_nlink;      /* number of hard links */
+	int                ust_uid;        /* user ID of owner */
+	int                ust_gid;        /* group ID of owner */
+	unsigned long long ust_size;       /* total size, in bytes */
+	int                ust_blksize;    /* blocksize for filesystem I/O */
+	unsigned long long ust_blocks;     /* number of blocks allocated */
+	unsigned long      ust_atime;      /* time of last access */
+	unsigned long      ust_mtime;      /* time of last modification */
+	unsigned long      ust_ctime;      /* time of last change */
+};
+
+struct openflags {
+	unsigned int r : 1;
+	unsigned int w : 1;
+	unsigned int s : 1;	/* O_SYNC */
+	unsigned int c : 1;	/* O_CREAT */
+	unsigned int t : 1;	/* O_TRUNC */
+	unsigned int a : 1;	/* O_APPEND */
+	unsigned int e : 1;	/* O_EXCL */
+	unsigned int cl : 1;    /* FD_CLOEXEC */
+};
+
+#define OPENFLAGS() ((struct openflags) { .r = 0, .w = 0, .s = 0, .c = 0, \
+					  .t = 0, .a = 0, .e = 0, .cl = 0 })
+
+static inline struct openflags of_read(struct openflags flags)
+{
+	flags.r = 1;
+	return flags;
+}
+
+static inline struct openflags of_write(struct openflags flags)
+{
+	flags.w = 1;
+	return flags;
+}
+
+static inline struct openflags of_rdwr(struct openflags flags)
+{
+	return of_read(of_write(flags));
+}
+
+static inline struct openflags of_set_rw(struct openflags flags, int r, int w)
+{
+	flags.r = r;
+	flags.w = w;
+	return flags;
+}
+
+static inline struct openflags of_sync(struct openflags flags)
+{
+	flags.s = 1;
+	return flags;
+}
+
+static inline struct openflags of_create(struct openflags flags)
+{
+	flags.c = 1;
+	return flags;
+}
+
+static inline struct openflags of_trunc(struct openflags flags)
+{
+	flags.t = 1;
+	return flags;
+}
+
+static inline struct openflags of_append(struct openflags flags)
+{
+	flags.a = 1;
+	return flags;
+}
+
+static inline struct openflags of_excl(struct openflags flags)
+{
+	flags.e = 1;
+	return flags;
+}
+
+static inline struct openflags of_cloexec(struct openflags flags)
+{
+	flags.cl = 1;
+	return flags;
+}
+
+/* file.c */
+extern int os_stat_file(const char *file_name, struct uml_stat *buf);
+extern int os_stat_fd(const int fd, struct uml_stat *buf);
+extern int os_access(const char *file, int mode);
+extern int os_set_exec_close(int fd);
+extern int os_ioctl_generic(int fd, unsigned int cmd, unsigned long arg);
+extern int os_get_ifname(int fd, char *namebuf);
+extern int os_set_slip(int fd);
+extern int os_mode_fd(int fd, int mode);
+
+extern int os_seek_file(int fd, unsigned long long offset);
+extern int os_open_file(const char *file, struct openflags flags, int mode);
+extern int os_read_file(int fd, void *buf, int len);
+extern int os_write_file(int fd, const void *buf, int count);
+extern int os_file_size(const char *file, unsigned long long *size_out);
+extern int os_file_modtime(const char *file, unsigned long *modtime);
+extern int os_pipe(int *fd, int stream, int close_on_exec);
+extern int os_set_fd_async(int fd);
+extern int os_clear_fd_async(int fd);
+extern int os_set_fd_block(int fd, int blocking);
+extern int os_accept_connection(int fd);
+extern int os_create_unix_socket(const char *file, int len, int close_on_exec);
+extern int os_shutdown_socket(int fd, int r, int w);
+extern void os_close_file(int fd);
+extern int os_rcv_fd(int fd, int *helper_pid_out);
+extern int create_unix_socket(char *file, int len, int close_on_exec);
+extern int os_connect_socket(const char *name);
+extern int os_file_type(char *file);
+extern int os_file_mode(const char *file, struct openflags *mode_out);
+extern int os_lock_file(int fd, int excl);
+extern void os_flush_stdout(void);
+extern int os_stat_filesystem(char *path, long *bsize_out,
+			      long long *blocks_out, long long *bfree_out,
+			      long long *bavail_out, long long *files_out,
+			      long long *ffree_out, void *fsid_out,
+			      int fsid_size, long *namelen_out,
+			      long *spare_out);
+extern int os_change_dir(char *dir);
+extern int os_fchange_dir(int fd);
+
+/* start_up.c */
+extern void os_early_checks(void);
+extern void can_do_skas(void);
+extern void os_check_bugs(void);
+extern void check_host_supports_tls(int *supports_tls, int *tls_min);
+
+/* mem.c */
+extern int create_mem_file(unsigned long long len);
+
+/* process.c */
+extern unsigned long os_process_pc(int pid);
+extern int os_process_parent(int pid);
+extern void os_stop_process(int pid);
+extern void os_kill_process(int pid, int reap_child);
+extern void os_kill_ptraced_process(int pid, int reap_child);
+extern long os_ptrace_ldt(long pid, long addr, long data);
+
+extern int os_getpid(void);
+extern int os_getpgrp(void);
+
+extern void init_new_thread_signals(void);
+extern int run_kernel_thread(int (*fn)(void *), void *arg, jmp_buf **jmp_ptr);
+
+extern int os_map_memory(void *virt, int fd, unsigned long long off,
+			 unsigned long len, int r, int w, int x);
+extern int os_protect_memory(void *addr, unsigned long len,
+			     int r, int w, int x);
+extern int os_unmap_memory(void *addr, int len);
+extern int os_drop_memory(void *addr, int length);
+extern int can_drop_memory(void);
+extern void os_flush_stdout(void);
+
+/* uaccess.c */
+extern unsigned long __do_user_copy(void *to, const void *from, int n,
+				    void **fault_addr, jmp_buf **fault_catcher,
+				    void (*op)(void *to, const void *from,
+					       int n), int *faulted_out);
+
+/* execvp.c */
+extern int execvp_noalloc(char *buf, const char *file, char *const argv[]);
+/* helper.c */
+extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv);
+extern int run_helper_thread(int (*proc)(void *), void *arg,
+			     unsigned int flags, unsigned long *stack_out);
+extern int helper_wait(int pid);
+
+
+/* tls.c */
+extern int os_set_thread_area(user_desc_t *info, int pid);
+extern int os_get_thread_area(user_desc_t *info, int pid);
+
+/* umid.c */
+extern int umid_file_name(char *name, char *buf, int len);
+extern int set_umid(char *name);
+extern char *get_umid(void);
+
+/* signal.c */
+extern void timer_init(void);
+extern void set_sigstack(void *sig_stack, int size);
+extern void remove_sigstack(void);
+extern void set_handler(int sig, void (*handler)(int), int flags, ...);
+extern int change_sig(int signal, int on);
+extern void block_signals(void);
+extern void unblock_signals(void);
+extern int get_signals(void);
+extern int set_signals(int enable);
+
+/* util.c */
+extern void stack_protections(unsigned long address);
+extern int raw(int fd);
+extern void setup_machinename(char *machine_out);
+extern void setup_hostinfo(char *buf, int len);
+extern void os_dump_core(void) __attribute__ ((noreturn));
+
+/* time.c */
+extern void idle_sleep(unsigned long long nsecs);
+extern int set_interval(void);
+extern int timer_one_shot(int ticks);
+extern long long disable_timer(void);
+extern void uml_idle_timer(void);
+extern long long os_nsecs(void);
+
+/* skas/mem.c */
+extern long run_syscall_stub(struct mm_id * mm_idp,
+			     int syscall, unsigned long *args, long expected,
+			     void **addr, int done);
+extern long syscall_stub_data(struct mm_id * mm_idp,
+			      unsigned long *data, int data_count,
+			      void **addr, void **stub_addr);
+extern int map(struct mm_id * mm_idp, unsigned long virt,
+	       unsigned long len, int prot, int phys_fd,
+	       unsigned long long offset, int done, void **data);
+extern int unmap(struct mm_id * mm_idp, unsigned long addr, unsigned long len,
+		 int done, void **data);
+extern int protect(struct mm_id * mm_idp, unsigned long addr,
+		   unsigned long len, unsigned int prot, int done, void **data);
+
+/* skas/process.c */
+extern int is_skas_winch(int pid, int fd, void *data);
+extern int start_userspace(unsigned long stub_stack);
+extern int copy_context_skas0(unsigned long stack, int pid);
+extern void userspace(struct uml_pt_regs *regs);
+extern int map_stub_pages(int fd, unsigned long code, unsigned long data,
+			  unsigned long stack);
+extern void new_thread(void *stack, jmp_buf *buf, void (*handler)(void));
+extern void switch_threads(jmp_buf *me, jmp_buf *you);
+extern int start_idle_thread(void *stack, jmp_buf *switch_buf);
+extern void initial_thread_cb_skas(void (*proc)(void *),
+				 void *arg);
+extern void halt_skas(void);
+extern void reboot_skas(void);
+
+/* irq.c */
+extern int os_waiting_for_events(struct irq_fd *active_fds);
+extern int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds);
+extern void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg,
+		struct irq_fd *active_fds, struct irq_fd ***last_irq_ptr2);
+extern void os_free_irq_later(struct irq_fd *active_fds,
+		int irq, void *dev_id);
+extern int os_get_pollfd(int i);
+extern void os_set_pollfd(int i, int fd);
+extern void os_set_ioignore(void);
+
+/* sigio.c */
+extern int add_sigio_fd(int fd);
+extern int ignore_sigio_fd(int fd);
+extern void maybe_sigio_broken(int fd, int read);
+extern void sigio_broken(int fd, int read);
+
+/* sys-x86_64/prctl.c */
+extern int os_arch_prctl(int pid, int code, unsigned long *addr);
+
+/* tty.c */
+extern int get_pty(void);
+
+/* sys-$ARCH/task_size.c */
+extern unsigned long os_get_top_address(void);
+
+#endif
diff --git a/arch/um/include/process.h b/arch/um/include/shared/process.h
similarity index 100%
rename from arch/um/include/process.h
rename to arch/um/include/shared/process.h
diff --git a/arch/um/include/ptrace_user.h b/arch/um/include/shared/ptrace_user.h
similarity index 100%
rename from arch/um/include/ptrace_user.h
rename to arch/um/include/shared/ptrace_user.h
diff --git a/arch/um/include/registers.h b/arch/um/include/shared/registers.h
similarity index 100%
rename from arch/um/include/registers.h
rename to arch/um/include/shared/registers.h
diff --git a/arch/um/include/sigio.h b/arch/um/include/shared/sigio.h
similarity index 100%
rename from arch/um/include/sigio.h
rename to arch/um/include/shared/sigio.h
diff --git a/arch/um/include/skas/mm_id.h b/arch/um/include/shared/skas/mm_id.h
similarity index 100%
rename from arch/um/include/skas/mm_id.h
rename to arch/um/include/shared/skas/mm_id.h
diff --git a/arch/um/include/skas/proc_mm.h b/arch/um/include/shared/skas/proc_mm.h
similarity index 100%
rename from arch/um/include/skas/proc_mm.h
rename to arch/um/include/shared/skas/proc_mm.h
diff --git a/arch/um/include/skas/skas.h b/arch/um/include/shared/skas/skas.h
similarity index 100%
rename from arch/um/include/skas/skas.h
rename to arch/um/include/shared/skas/skas.h
diff --git a/arch/um/include/skas/stub-data.h b/arch/um/include/shared/skas/stub-data.h
similarity index 100%
rename from arch/um/include/skas/stub-data.h
rename to arch/um/include/shared/skas/stub-data.h
diff --git a/arch/um/include/skas_ptrace.h b/arch/um/include/shared/skas_ptrace.h
similarity index 100%
rename from arch/um/include/skas_ptrace.h
rename to arch/um/include/shared/skas_ptrace.h
diff --git a/arch/um/include/skas_ptregs.h b/arch/um/include/shared/skas_ptregs.h
similarity index 100%
rename from arch/um/include/skas_ptregs.h
rename to arch/um/include/shared/skas_ptregs.h
diff --git a/arch/um/include/syscall.h b/arch/um/include/shared/syscall.h
similarity index 100%
rename from arch/um/include/syscall.h
rename to arch/um/include/shared/syscall.h
diff --git a/arch/um/include/sysrq.h b/arch/um/include/shared/sysrq.h
similarity index 100%
rename from arch/um/include/sysrq.h
rename to arch/um/include/shared/sysrq.h
diff --git a/arch/um/include/task.h b/arch/um/include/shared/task.h
similarity index 100%
rename from arch/um/include/task.h
rename to arch/um/include/shared/task.h
diff --git a/arch/um/include/tlb.h b/arch/um/include/shared/tlb.h
similarity index 100%
rename from arch/um/include/tlb.h
rename to arch/um/include/shared/tlb.h
diff --git a/arch/um/include/ubd_user.h b/arch/um/include/shared/ubd_user.h
similarity index 100%
rename from arch/um/include/ubd_user.h
rename to arch/um/include/shared/ubd_user.h
diff --git a/arch/um/include/um_malloc.h b/arch/um/include/shared/um_malloc.h
similarity index 100%
rename from arch/um/include/um_malloc.h
rename to arch/um/include/shared/um_malloc.h
diff --git a/arch/um/include/shared/um_mmu.h b/arch/um/include/shared/um_mmu.h
new file mode 100644
index 0000000..b1a7e47
--- /dev/null
+++ b/arch/um/include/shared/um_mmu.h
@@ -0,0 +1,24 @@
+/* 
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __ARCH_UM_MMU_H
+#define __ARCH_UM_MMU_H
+
+#include "mm_id.h"
+#include "ldt.h"
+
+typedef struct mm_context {
+	struct mm_id id;
+	struct uml_ldt ldt;
+	struct page **stub_pages;
+} mm_context_t;
+
+extern void __switch_mm(struct mm_id * mm_idp);
+
+/* Avoid tangled inclusion with asm/ldt.h */
+extern long init_new_ldt(struct mm_context *to_mm, struct mm_context *from_mm);
+extern void free_ldt(struct mm_context *mm);
+
+#endif
diff --git a/arch/um/include/um_uaccess.h b/arch/um/include/shared/um_uaccess.h
similarity index 100%
rename from arch/um/include/um_uaccess.h
rename to arch/um/include/shared/um_uaccess.h
diff --git a/arch/um/include/shared/user.h b/arch/um/include/shared/user.h
new file mode 100644
index 0000000..293f7c7
--- /dev/null
+++ b/arch/um/include/shared/user.h
@@ -0,0 +1,45 @@
+/* 
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __USER_H__
+#define __USER_H__
+
+#include "kern_constants.h"
+
+/*
+ * The usual definition - copied here because the kernel provides its own,
+ * fancier, type-safe, definition.  Using that one would require
+ * copying too much infrastructure for my taste, so userspace files
+ * get less checking than kernel files.
+ */
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+/* This is to get size_t */
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stddef.h>
+#endif
+
+extern void panic(const char *fmt, ...)
+	__attribute__ ((format (printf, 1, 2)));
+
+#ifdef UML_CONFIG_PRINTK
+extern int printk(const char *fmt, ...)
+	__attribute__ ((format (printf, 1, 2)));
+#else
+static inline int printk(const char *fmt, ...)
+{
+	return 0;
+}
+#endif
+
+extern void schedule(void);
+extern int in_aton(char *str);
+extern int open_gdb_chan(void);
+extern size_t strlcpy(char *, const char *, size_t);
+extern size_t strlcat(char *, const char *, size_t);
+
+#endif
diff --git a/arch/um/include/sigcontext.h b/arch/um/include/sigcontext.h
deleted file mode 100644
index 59816ca..0000000
--- a/arch/um/include/sigcontext.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* 
- * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __UML_SIGCONTEXT_H__
-#define __UML_SIGCONTEXT_H__
-
-#include "sysdep/sigcontext.h"
-
-extern int sc_size(void *data);
-extern void sc_to_sc(void *to_ptr, void *from_ptr);
-
-#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/sysdep-i386/ptrace.h b/arch/um/include/sysdep-i386/ptrace.h
deleted file mode 100644
index 11c0896..0000000
--- a/arch/um/include/sysdep-i386/ptrace.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_I386_PTRACE_H
-#define __SYSDEP_I386_PTRACE_H
-
-#include "uml-config.h"
-#include "user_constants.h"
-#include "sysdep/faultinfo.h"
-
-#define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long))
-#define MAX_REG_OFFSET (UM_FRAME_SIZE)
-
-static inline void update_debugregs(int seq) {}
-
-/* syscall emulation path in ptrace */
-
-#ifndef PTRACE_SYSEMU
-#define PTRACE_SYSEMU 31
-#endif
-
-void set_using_sysemu(int value);
-int get_using_sysemu(void);
-extern int sysemu_supported;
-
-#include "skas_ptregs.h"
-
-#define REGS_IP(r) ((r)[HOST_IP])
-#define REGS_SP(r) ((r)[HOST_SP])
-#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
-#define REGS_EAX(r) ((r)[HOST_EAX])
-#define REGS_EBX(r) ((r)[HOST_EBX])
-#define REGS_ECX(r) ((r)[HOST_ECX])
-#define REGS_EDX(r) ((r)[HOST_EDX])
-#define REGS_ESI(r) ((r)[HOST_ESI])
-#define REGS_EDI(r) ((r)[HOST_EDI])
-#define REGS_EBP(r) ((r)[HOST_EBP])
-#define REGS_CS(r) ((r)[HOST_CS])
-#define REGS_SS(r) ((r)[HOST_SS])
-#define REGS_DS(r) ((r)[HOST_DS])
-#define REGS_ES(r) ((r)[HOST_ES])
-#define REGS_FS(r) ((r)[HOST_FS])
-#define REGS_GS(r) ((r)[HOST_GS])
-
-#define REGS_SET_SYSCALL_RETURN(r, res) REGS_EAX(r) = (res)
-
-#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
-
-#ifndef PTRACE_SYSEMU_SINGLESTEP
-#define PTRACE_SYSEMU_SINGLESTEP 32
-#endif
-
-struct uml_pt_regs {
-	unsigned long gp[MAX_REG_NR];
-	struct faultinfo faultinfo;
-	long syscall;
-	int is_user;
-};
-
-#define EMPTY_UML_PT_REGS { }
-
-#define UPT_IP(r) REGS_IP((r)->gp)
-#define UPT_SP(r) REGS_SP((r)->gp)
-#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
-#define UPT_EAX(r) REGS_EAX((r)->gp)
-#define UPT_EBX(r) REGS_EBX((r)->gp)
-#define UPT_ECX(r) REGS_ECX((r)->gp)
-#define UPT_EDX(r) REGS_EDX((r)->gp)
-#define UPT_ESI(r) REGS_ESI((r)->gp)
-#define UPT_EDI(r) REGS_EDI((r)->gp)
-#define UPT_EBP(r) REGS_EBP((r)->gp)
-#define UPT_ORIG_EAX(r) ((r)->syscall)
-#define UPT_CS(r) REGS_CS((r)->gp)
-#define UPT_SS(r) REGS_SS((r)->gp)
-#define UPT_DS(r) REGS_DS((r)->gp)
-#define UPT_ES(r) REGS_ES((r)->gp)
-#define UPT_FS(r) REGS_FS((r)->gp)
-#define UPT_GS(r) REGS_GS((r)->gp)
-
-#define UPT_SYSCALL_ARG1(r) UPT_EBX(r)
-#define UPT_SYSCALL_ARG2(r) UPT_ECX(r)
-#define UPT_SYSCALL_ARG3(r) UPT_EDX(r)
-#define UPT_SYSCALL_ARG4(r) UPT_ESI(r)
-#define UPT_SYSCALL_ARG5(r) UPT_EDI(r)
-#define UPT_SYSCALL_ARG6(r) UPT_EBP(r)
-
-extern int user_context(unsigned long sp);
-
-#define UPT_IS_USER(r) ((r)->is_user)
-
-struct syscall_args {
-	unsigned long args[6];
-};
-
-#define SYSCALL_ARGS(r) ((struct syscall_args) \
-			 { .args = { UPT_SYSCALL_ARG1(r),	\
-				     UPT_SYSCALL_ARG2(r),	\
-				     UPT_SYSCALL_ARG3(r),	\
-				     UPT_SYSCALL_ARG4(r),	\
-				     UPT_SYSCALL_ARG5(r),	\
-				     UPT_SYSCALL_ARG6(r) } } )
-
-#define UPT_REG(regs, reg) \
-	({	unsigned long val; \
-		switch(reg){ \
-		case EIP: val = UPT_IP(regs); break; \
-		case UESP: val = UPT_SP(regs); break; \
-		case EAX: val = UPT_EAX(regs); break; \
-		case EBX: val = UPT_EBX(regs); break; \
-		case ECX: val = UPT_ECX(regs); break; \
-		case EDX: val = UPT_EDX(regs); break; \
-		case ESI: val = UPT_ESI(regs); break; \
-		case EDI: val = UPT_EDI(regs); break; \
-		case EBP: val = UPT_EBP(regs); break; \
-		case ORIG_EAX: val = UPT_ORIG_EAX(regs); break; \
-		case CS: val = UPT_CS(regs); break; \
-		case SS: val = UPT_SS(regs); break; \
-		case DS: val = UPT_DS(regs); break; \
-		case ES: val = UPT_ES(regs); break; \
-		case FS: val = UPT_FS(regs); break; \
-		case GS: val = UPT_GS(regs); break; \
-		case EFL: val = UPT_EFLAGS(regs); break; \
-		default :  \
-			panic("Bad register in UPT_REG : %d\n", reg);  \
-			val = -1; \
-		} \
-	        val; \
-	})
-
-#define UPT_SET(regs, reg, val) \
-	do { \
-		switch(reg){ \
-		case EIP: UPT_IP(regs) = val; break; \
-		case UESP: UPT_SP(regs) = val; break; \
-		case EAX: UPT_EAX(regs) = val; break; \
-		case EBX: UPT_EBX(regs) = val; break; \
-		case ECX: UPT_ECX(regs) = val; break; \
-		case EDX: UPT_EDX(regs) = val; break; \
-		case ESI: UPT_ESI(regs) = val; break; \
-		case EDI: UPT_EDI(regs) = val; break; \
-		case EBP: UPT_EBP(regs) = val; break; \
-		case ORIG_EAX: UPT_ORIG_EAX(regs) = val; break; \
-		case CS: UPT_CS(regs) = val; break; \
-		case SS: UPT_SS(regs) = val; break; \
-		case DS: UPT_DS(regs) = val; break; \
-		case ES: UPT_ES(regs) = val; break; \
-		case FS: UPT_FS(regs) = val; break; \
-		case GS: UPT_GS(regs) = val; break; \
-		case EFL: UPT_EFLAGS(regs) = val; break; \
-		default :  \
-			panic("Bad register in UPT_SET : %d\n", reg);  \
-			break; \
-		} \
-	} while (0)
-
-#define UPT_SET_SYSCALL_RETURN(r, res) \
-	REGS_SET_SYSCALL_RETURN((r)->regs, (res))
-
-#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
-
-#define UPT_ORIG_SYSCALL(r) UPT_EAX(r)
-#define UPT_SYSCALL_NR(r) UPT_ORIG_EAX(r)
-#define UPT_SYSCALL_RET(r) UPT_EAX(r)
-
-#define UPT_FAULTINFO(r) (&(r)->faultinfo)
-
-extern void arch_init_registers(int pid);
-
-#endif
diff --git a/arch/um/include/sysdep-i386/stub.h b/arch/um/include/sysdep-i386/stub.h
deleted file mode 100644
index 8c097b8..0000000
--- a/arch/um/include/sysdep-i386/stub.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_STUB_H
-#define __SYSDEP_STUB_H
-
-#include <sys/mman.h>
-#include <asm/ptrace.h>
-#include <asm/unistd.h>
-#include "as-layout.h"
-#include "stub-data.h"
-#include "kern_constants.h"
-#include "uml-config.h"
-
-extern void stub_segv_handler(int sig);
-extern void stub_clone_handler(void);
-
-#define STUB_SYSCALL_RET EAX
-#define STUB_MMAP_NR __NR_mmap2
-#define MMAP_OFFSET(o) ((o) >> UM_KERN_PAGE_SHIFT)
-
-static inline long stub_syscall0(long syscall)
-{
-	long ret;
-
-	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall));
-
-	return ret;
-}
-
-static inline long stub_syscall1(long syscall, long arg1)
-{
-	long ret;
-
-	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1));
-
-	return ret;
-}
-
-static inline long stub_syscall2(long syscall, long arg1, long arg2)
-{
-	long ret;
-
-	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
-			"c" (arg2));
-
-	return ret;
-}
-
-static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
-{
-	long ret;
-
-	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
-			"c" (arg2), "d" (arg3));
-
-	return ret;
-}
-
-static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
-				 long arg4)
-{
-	long ret;
-
-	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
-			"c" (arg2), "d" (arg3), "S" (arg4));
-
-	return ret;
-}
-
-static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
-				 long arg4, long arg5)
-{
-	long ret;
-
-	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
-			"c" (arg2), "d" (arg3), "S" (arg4), "D" (arg5));
-
-	return ret;
-}
-
-static inline void trap_myself(void)
-{
-	__asm("int3");
-}
-
-static inline void remap_stack(int fd, unsigned long offset)
-{
-	__asm__ volatile ("movl %%eax,%%ebp ; movl %0,%%eax ; int $0x80 ;"
-			  "movl %7, %%ebx ; movl %%eax, (%%ebx)"
-			  : : "g" (STUB_MMAP_NR), "b" (STUB_DATA),
-			    "c" (UM_KERN_PAGE_SIZE),
-			    "d" (PROT_READ | PROT_WRITE),
-			    "S" (MAP_FIXED | MAP_SHARED), "D" (fd),
-			    "a" (offset),
-			    "i" (&((struct stub_data *) STUB_DATA)->err)
-			  : "memory");
-}
-
-#endif
diff --git a/arch/um/include/sysdep-i386/tls.h b/arch/um/include/sysdep-i386/tls.h
deleted file mode 100644
index 918fd3c..0000000
--- a/arch/um/include/sysdep-i386/tls.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _SYSDEP_TLS_H
-#define _SYSDEP_TLS_H
-
-# ifndef __KERNEL__
-
-/* Change name to avoid conflicts with the original one from <asm/ldt.h>, which
- * may be named user_desc (but in 2.4 and in header matching its API was named
- * modify_ldt_ldt_s). */
-
-typedef struct um_dup_user_desc {
-	unsigned int  entry_number;
-	unsigned int  base_addr;
-	unsigned int  limit;
-	unsigned int  seg_32bit:1;
-	unsigned int  contents:2;
-	unsigned int  read_exec_only:1;
-	unsigned int  limit_in_pages:1;
-	unsigned int  seg_not_present:1;
-	unsigned int  useable:1;
-} user_desc_t;
-
-# else /* __KERNEL__ */
-
-#  include <asm/ldt.h>
-typedef struct user_desc user_desc_t;
-
-# endif /* __KERNEL__ */
-
-#define GDT_ENTRY_TLS_MIN_I386 6
-#define GDT_ENTRY_TLS_MIN_X86_64 12
-
-#endif /* _SYSDEP_TLS_H */
diff --git a/arch/um/include/sysdep-x86_64/ptrace.h b/arch/um/include/sysdep-x86_64/ptrace.h
deleted file mode 100644
index 9ea44d1..0000000
--- a/arch/um/include/sysdep-x86_64/ptrace.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- *
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_X86_64_PTRACE_H
-#define __SYSDEP_X86_64_PTRACE_H
-
-#include "uml-config.h"
-#include "user_constants.h"
-#include "sysdep/faultinfo.h"
-
-#define MAX_REG_OFFSET (UM_FRAME_SIZE)
-#define MAX_REG_NR ((MAX_REG_OFFSET) / sizeof(unsigned long))
-
-#include "skas_ptregs.h"
-
-#define REGS_IP(r) ((r)[HOST_IP])
-#define REGS_SP(r) ((r)[HOST_SP])
-
-#define REGS_RBX(r) ((r)[HOST_RBX])
-#define REGS_RCX(r) ((r)[HOST_RCX])
-#define REGS_RDX(r) ((r)[HOST_RDX])
-#define REGS_RSI(r) ((r)[HOST_RSI])
-#define REGS_RDI(r) ((r)[HOST_RDI])
-#define REGS_RBP(r) ((r)[HOST_RBP])
-#define REGS_RAX(r) ((r)[HOST_RAX])
-#define REGS_R8(r) ((r)[HOST_R8])
-#define REGS_R9(r) ((r)[HOST_R9])
-#define REGS_R10(r) ((r)[HOST_R10])
-#define REGS_R11(r) ((r)[HOST_R11])
-#define REGS_R12(r) ((r)[HOST_R12])
-#define REGS_R13(r) ((r)[HOST_R13])
-#define REGS_R14(r) ((r)[HOST_R14])
-#define REGS_R15(r) ((r)[HOST_R15])
-#define REGS_CS(r) ((r)[HOST_CS])
-#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
-#define REGS_SS(r) ((r)[HOST_SS])
-
-#define HOST_FS_BASE 21
-#define HOST_GS_BASE 22
-#define HOST_DS 23
-#define HOST_ES 24
-#define HOST_FS 25
-#define HOST_GS 26
-
-/* Also defined in asm/ptrace-x86_64.h, but not in libc headers.  So, these
- * are already defined for kernel code, but not for userspace code.
- */
-#ifndef FS_BASE
-/* These aren't defined in ptrace.h, but exist in struct user_regs_struct,
- * which is what x86_64 ptrace actually uses.
- */
-#define FS_BASE (HOST_FS_BASE * sizeof(long))
-#define GS_BASE (HOST_GS_BASE * sizeof(long))
-#define DS (HOST_DS * sizeof(long))
-#define ES (HOST_ES * sizeof(long))
-#define FS (HOST_FS * sizeof(long))
-#define GS (HOST_GS * sizeof(long))
-#endif
-
-#define REGS_FS_BASE(r) ((r)[HOST_FS_BASE])
-#define REGS_GS_BASE(r) ((r)[HOST_GS_BASE])
-#define REGS_DS(r) ((r)[HOST_DS])
-#define REGS_ES(r) ((r)[HOST_ES])
-#define REGS_FS(r) ((r)[HOST_FS])
-#define REGS_GS(r) ((r)[HOST_GS])
-
-#define REGS_ORIG_RAX(r) ((r)[HOST_ORIG_RAX])
-
-#define REGS_SET_SYSCALL_RETURN(r, res) REGS_RAX(r) = (res)
-
-#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
-
-#define REGS_SEGV_IS_FIXABLE(r) SEGV_IS_FIXABLE((r)->trap_type)
-
-#define REGS_FAULT_ADDR(r) ((r)->fault_addr)
-
-#define REGS_FAULT_WRITE(r) FAULT_WRITE((r)->fault_type)
-
-#define REGS_TRAP(r) ((r)->trap_type)
-
-#define REGS_ERR(r) ((r)->fault_type)
-
-struct uml_pt_regs {
-	unsigned long gp[MAX_REG_NR];
-	struct faultinfo faultinfo;
-	long syscall;
-	int is_user;
-};
-
-#define EMPTY_UML_PT_REGS { }
-
-#define UPT_RBX(r) REGS_RBX((r)->gp)
-#define UPT_RCX(r) REGS_RCX((r)->gp)
-#define UPT_RDX(r) REGS_RDX((r)->gp)
-#define UPT_RSI(r) REGS_RSI((r)->gp)
-#define UPT_RDI(r) REGS_RDI((r)->gp)
-#define UPT_RBP(r) REGS_RBP((r)->gp)
-#define UPT_RAX(r) REGS_RAX((r)->gp)
-#define UPT_R8(r) REGS_R8((r)->gp)
-#define UPT_R9(r) REGS_R9((r)->gp)
-#define UPT_R10(r) REGS_R10((r)->gp)
-#define UPT_R11(r) REGS_R11((r)->gp)
-#define UPT_R12(r) REGS_R12((r)->gp)
-#define UPT_R13(r) REGS_R13((r)->gp)
-#define UPT_R14(r) REGS_R14((r)->gp)
-#define UPT_R15(r) REGS_R15((r)->gp)
-#define UPT_CS(r) REGS_CS((r)->gp)
-#define UPT_FS_BASE(r) REGS_FS_BASE((r)->gp)
-#define UPT_FS(r) REGS_FS((r)->gp)
-#define UPT_GS_BASE(r) REGS_GS_BASE((r)->gp)
-#define UPT_GS(r) REGS_GS((r)->gp)
-#define UPT_DS(r) REGS_DS((r)->gp)
-#define UPT_ES(r) REGS_ES((r)->gp)
-#define UPT_CS(r) REGS_CS((r)->gp)
-#define UPT_SS(r) REGS_SS((r)->gp)
-#define UPT_ORIG_RAX(r) REGS_ORIG_RAX((r)->gp)
-
-#define UPT_IP(r) REGS_IP((r)->gp)
-#define UPT_SP(r) REGS_SP((r)->gp)
-
-#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
-#define UPT_SYSCALL_NR(r) ((r)->syscall)
-#define UPT_SYSCALL_RET(r) UPT_RAX(r)
-
-extern int user_context(unsigned long sp);
-
-#define UPT_IS_USER(r) ((r)->is_user)
-
-#define UPT_SYSCALL_ARG1(r) UPT_RDI(r)
-#define UPT_SYSCALL_ARG2(r) UPT_RSI(r)
-#define UPT_SYSCALL_ARG3(r) UPT_RDX(r)
-#define UPT_SYSCALL_ARG4(r) UPT_R10(r)
-#define UPT_SYSCALL_ARG5(r) UPT_R8(r)
-#define UPT_SYSCALL_ARG6(r) UPT_R9(r)
-
-struct syscall_args {
-	unsigned long args[6];
-};
-
-#define SYSCALL_ARGS(r) ((struct syscall_args) \
-			 { .args = { UPT_SYSCALL_ARG1(r),	 \
-				     UPT_SYSCALL_ARG2(r),	 \
-				     UPT_SYSCALL_ARG3(r),	 \
-				     UPT_SYSCALL_ARG4(r),	 \
-				     UPT_SYSCALL_ARG5(r),	 \
-				     UPT_SYSCALL_ARG6(r) } } )
-
-#define UPT_REG(regs, reg) \
-	({      unsigned long val;		\
-		switch(reg){						\
-		case R8: val = UPT_R8(regs); break;			\
-		case R9: val = UPT_R9(regs); break;			\
-		case R10: val = UPT_R10(regs); break;			\
-		case R11: val = UPT_R11(regs); break;			\
-		case R12: val = UPT_R12(regs); break;			\
-		case R13: val = UPT_R13(regs); break;			\
-		case R14: val = UPT_R14(regs); break;			\
-		case R15: val = UPT_R15(regs); break;			\
-		case RIP: val = UPT_IP(regs); break;			\
-		case RSP: val = UPT_SP(regs); break;			\
-		case RAX: val = UPT_RAX(regs); break;			\
-		case RBX: val = UPT_RBX(regs); break;			\
-		case RCX: val = UPT_RCX(regs); break;			\
-		case RDX: val = UPT_RDX(regs); break;			\
-		case RSI: val = UPT_RSI(regs); break;			\
-		case RDI: val = UPT_RDI(regs); break;			\
-		case RBP: val = UPT_RBP(regs); break;			\
-		case ORIG_RAX: val = UPT_ORIG_RAX(regs); break;		\
-		case CS: val = UPT_CS(regs); break;			\
-		case SS: val = UPT_SS(regs); break;			\
-		case FS_BASE: val = UPT_FS_BASE(regs); break;		\
-		case GS_BASE: val = UPT_GS_BASE(regs); break;		\
-		case DS: val = UPT_DS(regs); break;			\
-		case ES: val = UPT_ES(regs); break;			\
-		case FS : val = UPT_FS (regs); break;			\
-		case GS: val = UPT_GS(regs); break;			\
-		case EFLAGS: val = UPT_EFLAGS(regs); break;		\
-		default :						\
-			panic("Bad register in UPT_REG : %d\n", reg);	\
-			val = -1;					\
-		}							\
-		val;							\
-	})
-
-
-#define UPT_SET(regs, reg, val) \
-	({      unsigned long __upt_val = val;	\
-		switch(reg){						\
-		case R8: UPT_R8(regs) = __upt_val; break;		\
-		case R9: UPT_R9(regs) = __upt_val; break;		\
-		case R10: UPT_R10(regs) = __upt_val; break;		\
-		case R11: UPT_R11(regs) = __upt_val; break;		\
-		case R12: UPT_R12(regs) = __upt_val; break;		\
-		case R13: UPT_R13(regs) = __upt_val; break;		\
-		case R14: UPT_R14(regs) = __upt_val; break;		\
-		case R15: UPT_R15(regs) = __upt_val; break;		\
-		case RIP: UPT_IP(regs) = __upt_val; break;		\
-		case RSP: UPT_SP(regs) = __upt_val; break;		\
-		case RAX: UPT_RAX(regs) = __upt_val; break;		\
-		case RBX: UPT_RBX(regs) = __upt_val; break;		\
-		case RCX: UPT_RCX(regs) = __upt_val; break;		\
-		case RDX: UPT_RDX(regs) = __upt_val; break;		\
-		case RSI: UPT_RSI(regs) = __upt_val; break;		\
-		case RDI: UPT_RDI(regs) = __upt_val; break;		\
-		case RBP: UPT_RBP(regs) = __upt_val; break;		\
-		case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break;	\
-		case CS: UPT_CS(regs) = __upt_val; break;		\
-		case SS: UPT_SS(regs) = __upt_val; break;		\
-		case FS_BASE: UPT_FS_BASE(regs) = __upt_val; break;	\
-		case GS_BASE: UPT_GS_BASE(regs) = __upt_val; break;	\
-		case DS: UPT_DS(regs) = __upt_val; break;		\
-		case ES: UPT_ES(regs) = __upt_val; break;		\
-		case FS: UPT_FS(regs) = __upt_val; break;		\
-		case GS: UPT_GS(regs) = __upt_val; break;		\
-		case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break;	\
-		default :						\
-			panic("Bad register in UPT_SET : %d\n", reg);	\
-			break;						\
-		}							\
-		__upt_val;						\
-	})
-
-#define UPT_SET_SYSCALL_RETURN(r, res) \
-	REGS_SET_SYSCALL_RETURN((r)->regs, (res))
-
-#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
-
-#define UPT_SEGV_IS_FIXABLE(r) REGS_SEGV_IS_FIXABLE(&r->skas)
-
-#define UPT_FAULTINFO(r) (&(r)->faultinfo)
-
-static inline void arch_init_registers(int pid)
-{
-}
-
-#endif
diff --git a/arch/um/include/sysdep-x86_64/stub.h b/arch/um/include/sysdep-x86_64/stub.h
deleted file mode 100644
index 655f9c2..0000000
--- a/arch/um/include/sysdep-x86_64/stub.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_STUB_H
-#define __SYSDEP_STUB_H
-
-#include <sys/mman.h>
-#include <asm/unistd.h>
-#include <sysdep/ptrace_user.h>
-#include "as-layout.h"
-#include "stub-data.h"
-#include "kern_constants.h"
-#include "uml-config.h"
-
-extern void stub_segv_handler(int sig);
-extern void stub_clone_handler(void);
-
-#define STUB_SYSCALL_RET PT_INDEX(RAX)
-#define STUB_MMAP_NR __NR_mmap
-#define MMAP_OFFSET(o) (o)
-
-#define __syscall_clobber "r11","rcx","memory"
-#define __syscall "syscall"
-
-static inline long stub_syscall0(long syscall)
-{
-	long ret;
-
-	__asm__ volatile (__syscall
-		: "=a" (ret)
-		: "0" (syscall) : __syscall_clobber );
-
-	return ret;
-}
-
-static inline long stub_syscall2(long syscall, long arg1, long arg2)
-{
-	long ret;
-
-	__asm__ volatile (__syscall
-		: "=a" (ret)
-		: "0" (syscall), "D" (arg1), "S" (arg2) : __syscall_clobber );
-
-	return ret;
-}
-
-static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
-{
-	long ret;
-
-	__asm__ volatile (__syscall
-		: "=a" (ret)
-		: "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3)
-		: __syscall_clobber );
-
-	return ret;
-}
-
-static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
-				 long arg4)
-{
-	long ret;
-
-	__asm__ volatile ("movq %5,%%r10 ; " __syscall
-		: "=a" (ret)
-		: "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3),
-		  "g" (arg4)
-		: __syscall_clobber, "r10" );
-
-	return ret;
-}
-
-static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
-				 long arg4, long arg5)
-{
-	long ret;
-
-	__asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; " __syscall
-		: "=a" (ret)
-		: "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3),
-		  "g" (arg4), "g" (arg5)
-		: __syscall_clobber, "r10", "r8" );
-
-	return ret;
-}
-
-static inline void trap_myself(void)
-{
-	__asm("int3");
-}
-
-static inline void remap_stack(long fd, unsigned long offset)
-{
-	__asm__ volatile ("movq %4,%%r10 ; movq %5,%%r8 ; "
-			  "movq %6, %%r9; " __syscall "; movq %7, %%rbx ; "
-			  "movq %%rax, (%%rbx)":
-			  : "a" (STUB_MMAP_NR), "D" (STUB_DATA),
-			    "S" (UM_KERN_PAGE_SIZE),
-			    "d" (PROT_READ | PROT_WRITE),
-                            "g" (MAP_FIXED | MAP_SHARED), "g" (fd),
-			    "g" (offset),
-			    "i" (&((struct stub_data *) STUB_DATA)->err)
-			  : __syscall_clobber, "r10", "r8", "r9" );
-}
-
-#endif
diff --git a/arch/um/include/sysdep-x86_64/tls.h b/arch/um/include/sysdep-x86_64/tls.h
deleted file mode 100644
index 35f19f2..0000000
--- a/arch/um/include/sysdep-x86_64/tls.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _SYSDEP_TLS_H
-#define _SYSDEP_TLS_H
-
-# ifndef __KERNEL__
-
-/* Change name to avoid conflicts with the original one from <asm/ldt.h>, which
- * may be named user_desc (but in 2.4 and in header matching its API was named
- * modify_ldt_ldt_s). */
-
-typedef struct um_dup_user_desc {
-	unsigned int  entry_number;
-	unsigned int  base_addr;
-	unsigned int  limit;
-	unsigned int  seg_32bit:1;
-	unsigned int  contents:2;
-	unsigned int  read_exec_only:1;
-	unsigned int  limit_in_pages:1;
-	unsigned int  seg_not_present:1;
-	unsigned int  useable:1;
-	unsigned int  lm:1;
-} user_desc_t;
-
-# else /* __KERNEL__ */
-
-#  include <asm/ldt.h>
-typedef struct user_desc user_desc_t;
-
-# endif /* __KERNEL__ */
-#endif /* _SYSDEP_TLS_H */
diff --git a/arch/um/include/um_mmu.h b/arch/um/include/um_mmu.h
deleted file mode 100644
index f575ff9..0000000
--- a/arch/um/include/um_mmu.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* 
- * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __ARCH_UM_MMU_H
-#define __ARCH_UM_MMU_H
-
-#include "uml-config.h"
-#include "mm_id.h"
-#include "asm/ldt.h"
-
-typedef struct mm_context {
-	struct mm_id id;
-	struct uml_ldt ldt;
-	struct page **stub_pages;
-} mm_context_t;
-
-extern void __switch_mm(struct mm_id * mm_idp);
-
-/* Avoid tangled inclusion with asm/ldt.h */
-extern long init_new_ldt(struct mm_context *to_mm, struct mm_context *from_mm);
-extern void free_ldt(struct mm_context *mm);
-
-#endif
diff --git a/arch/um/include/user.h b/arch/um/include/user.h
deleted file mode 100644
index 1723fac..0000000
--- a/arch/um/include/user.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* 
- * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __USER_H__
-#define __USER_H__
-
-#include "uml-config.h"
-
-/*
- * The usual definition - copied here because the kernel provides its own,
- * fancier, type-safe, definition.  Using that one would require
- * copying too much infrastructure for my taste, so userspace files
- * get less checking than kernel files.
- */
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
-/* This is to get size_t */
-#ifdef __KERNEL__
-#include <linux/types.h>
-#else
-#include <stddef.h>
-#endif
-
-extern void panic(const char *fmt, ...)
-	__attribute__ ((format (printf, 1, 2)));
-
-#ifdef UML_CONFIG_PRINTK
-extern int printk(const char *fmt, ...)
-	__attribute__ ((format (printf, 1, 2)));
-#else
-static inline int printk(const char *fmt, ...)
-{
-	return 0;
-}
-#endif
-
-extern void schedule(void);
-extern int in_aton(char *str);
-extern int open_gdb_chan(void);
-extern size_t strlcpy(char *, const char *, size_t);
-extern size_t strlcat(char *, const char *, size_t);
-
-#endif
diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c
index 598711c..fda30d2 100644
--- a/arch/um/kernel/exec.c
+++ b/arch/um/kernel/exec.c
@@ -15,6 +15,7 @@
 #include "mem_user.h"
 #include "skas.h"
 #include "os.h"
+#include "internal.h"
 
 void flush_thread(void)
 {
diff --git a/arch/um/kernel/internal.h b/arch/um/kernel/internal.h
new file mode 100644
index 0000000..3bda43c
--- /dev/null
+++ b/arch/um/kernel/internal.h
@@ -0,0 +1 @@
+extern long um_execve(char *file, char __user *__user *argv, char __user *__user *env);
diff --git a/arch/um/kernel/signal.c b/arch/um/kernel/signal.c
index b0fce72..b5c094c 100644
--- a/arch/um/kernel/signal.c
+++ b/arch/um/kernel/signal.c
@@ -11,7 +11,7 @@
 #include <asm/unistd.h>
 #include "frame_kern.h"
 #include "kern_util.h"
-#include "sigcontext.h"
+#include <sysdep/sigcontext.h>
 
 EXPORT_SYMBOL(block_signals);
 EXPORT_SYMBOL(unblock_signals);
diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c
index 128ee85..c4df705 100644
--- a/arch/um/kernel/syscall.c
+++ b/arch/um/kernel/syscall.c
@@ -12,6 +12,7 @@
 #include "asm/mman.h"
 #include "asm/uaccess.h"
 #include "asm/unistd.h"
+#include "internal.h"
 
 long sys_fork(void)
 {
diff --git a/arch/um/os-Linux/include/file.h b/arch/um/os-Linux/include/file.h
deleted file mode 100644
index fe71be2..0000000
--- a/arch/um/os-Linux/include/file.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* 
- * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __OS_FILE_H__
-#define __OS_FILE_H__
-
-#define DEV_NULL "/dev/null"
-
-#endif
diff --git a/arch/um/os-Linux/skas/mem.c b/arch/um/os-Linux/skas/mem.c
index 484e68f..d261f17 100644
--- a/arch/um/os-Linux/skas/mem.c
+++ b/arch/um/os-Linux/skas/mem.c
@@ -20,7 +20,6 @@
 #include "user.h"
 #include "sysdep/ptrace.h"
 #include "sysdep/stub.h"
-#include "uml-config.h"
 
 extern unsigned long batch_syscall_stub, __syscall_stub_start;
 
diff --git a/arch/um/sys-i386/asm/archparam.h b/arch/um/sys-i386/asm/archparam.h
new file mode 100644
index 0000000..93fd723
--- /dev/null
+++ b/arch/um/sys-i386/asm/archparam.h
@@ -0,0 +1,26 @@
+/* 
+ * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_ARCHPARAM_I386_H
+#define __UM_ARCHPARAM_I386_H
+
+#ifdef CONFIG_X86_PAE
+#define LAST_PKMAP 512
+#else
+#define LAST_PKMAP 1024
+#endif
+
+#endif
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/include/asm-um/elf-i386.h b/arch/um/sys-i386/asm/elf.h
similarity index 100%
rename from include/asm-um/elf-i386.h
rename to arch/um/sys-i386/asm/elf.h
diff --git a/include/asm-um/module-i386.h b/arch/um/sys-i386/asm/module.h
similarity index 100%
rename from include/asm-um/module-i386.h
rename to arch/um/sys-i386/asm/module.h
diff --git a/arch/um/sys-i386/asm/processor.h b/arch/um/sys-i386/asm/processor.h
new file mode 100644
index 0000000..82a9061
--- /dev/null
+++ b/arch/um/sys-i386/asm/processor.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PROCESSOR_I386_H
+#define __UM_PROCESSOR_I386_H
+
+#include "linux/string.h"
+#include <sysdep/host_ldt.h>
+#include "asm/segment.h"
+
+extern int host_has_cmov;
+
+/* include faultinfo structure */
+#include "sysdep/faultinfo.h"
+
+struct uml_tls_struct {
+	struct user_desc tls;
+	unsigned flushed:1;
+	unsigned present:1;
+};
+
+struct arch_thread {
+	struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
+	unsigned long debugregs[8];
+	int debugregs_seq;
+	struct faultinfo faultinfo;
+};
+
+#define INIT_ARCH_THREAD { \
+	.tls_array  		= { [ 0 ... GDT_ENTRY_TLS_ENTRIES - 1 ] = \
+				    { .present = 0, .flushed = 0 } }, \
+	.debugregs  		= { [ 0 ... 7 ] = 0 }, \
+	.debugregs_seq		= 0, \
+	.faultinfo		= { 0, 0, 0 } \
+}
+
+static inline void arch_flush_thread(struct arch_thread *thread)
+{
+	/* Clear any TLS still hanging */
+	memset(&thread->tls_array, 0, sizeof(thread->tls_array));
+}
+
+static inline void arch_copy_thread(struct arch_thread *from,
+                                    struct arch_thread *to)
+{
+        memcpy(&to->tls_array, &from->tls_array, sizeof(from->tls_array));
+}
+
+#include <asm/user.h>
+
+/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
+static inline void rep_nop(void)
+{
+	__asm__ __volatile__("rep;nop": : :"memory");
+}
+
+#define cpu_relax()	rep_nop()
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter"). Stolen
+ * from asm-i386/processor.h
+ */
+#define current_text_addr() \
+	({ void *pc; __asm__("movl $1f,%0\n1:":"=g" (pc)); pc; })
+
+#define ARCH_IS_STACKGROW(address) \
+       (address + 32 >= UPT_SP(&current->thread.regs.regs))
+
+#define KSTK_EIP(tsk) KSTK_REG(tsk, EIP)
+#define KSTK_ESP(tsk) KSTK_REG(tsk, UESP)
+#define KSTK_EBP(tsk) KSTK_REG(tsk, EBP)
+
+#include "asm/processor-generic.h"
+
+#endif
diff --git a/arch/um/sys-i386/asm/ptrace.h b/arch/um/sys-i386/asm/ptrace.h
new file mode 100644
index 0000000..0273e4d
--- /dev/null
+++ b/arch/um/sys-i386/asm/ptrace.h
@@ -0,0 +1,56 @@
+/* 
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PTRACE_I386_H
+#define __UM_PTRACE_I386_H
+
+#define HOST_AUDIT_ARCH AUDIT_ARCH_I386
+
+#include "linux/compiler.h"
+#include "asm/ptrace-generic.h"
+
+#define PT_REGS_EAX(r) UPT_EAX(&(r)->regs)
+#define PT_REGS_EBX(r) UPT_EBX(&(r)->regs)
+#define PT_REGS_ECX(r) UPT_ECX(&(r)->regs)
+#define PT_REGS_EDX(r) UPT_EDX(&(r)->regs)
+#define PT_REGS_ESI(r) UPT_ESI(&(r)->regs)
+#define PT_REGS_EDI(r) UPT_EDI(&(r)->regs)
+#define PT_REGS_EBP(r) UPT_EBP(&(r)->regs)
+
+#define PT_REGS_CS(r) UPT_CS(&(r)->regs)
+#define PT_REGS_SS(r) UPT_SS(&(r)->regs)
+#define PT_REGS_DS(r) UPT_DS(&(r)->regs)
+#define PT_REGS_ES(r) UPT_ES(&(r)->regs)
+#define PT_REGS_FS(r) UPT_FS(&(r)->regs)
+#define PT_REGS_GS(r) UPT_GS(&(r)->regs)
+
+#define PT_REGS_EFLAGS(r) UPT_EFLAGS(&(r)->regs)
+
+#define PT_REGS_ORIG_SYSCALL(r) PT_REGS_EAX(r)
+#define PT_REGS_SYSCALL_RET(r) PT_REGS_EAX(r)
+#define PT_FIX_EXEC_STACK(sp) do ; while(0)
+
+#define profile_pc(regs) PT_REGS_IP(regs)
+
+#define user_mode(r) UPT_IS_USER(&(r)->regs)
+
+/*
+ * Forward declaration to avoid including sysdep/tls.h, which causes a
+ * circular include, and compilation failures.
+ */
+struct user_desc;
+
+extern int get_fpxregs(struct user_fxsr_struct __user *buf,
+		       struct task_struct *child);
+extern int set_fpxregs(struct user_fxsr_struct __user *buf,
+		       struct task_struct *tsk);
+
+extern int ptrace_get_thread_area(struct task_struct *child, int idx,
+                                  struct user_desc __user *user_desc);
+
+extern int ptrace_set_thread_area(struct task_struct *child, int idx,
+                                  struct user_desc __user *user_desc);
+
+#endif
diff --git a/arch/um/include/sysdep-i386/archsetjmp.h b/arch/um/sys-i386/shared/sysdep/archsetjmp.h
similarity index 100%
rename from arch/um/include/sysdep-i386/archsetjmp.h
rename to arch/um/sys-i386/shared/sysdep/archsetjmp.h
diff --git a/arch/um/include/sysdep-i386/barrier.h b/arch/um/sys-i386/shared/sysdep/barrier.h
similarity index 100%
rename from arch/um/include/sysdep-i386/barrier.h
rename to arch/um/sys-i386/shared/sysdep/barrier.h
diff --git a/arch/um/include/sysdep-i386/checksum.h b/arch/um/sys-i386/shared/sysdep/checksum.h
similarity index 100%
rename from arch/um/include/sysdep-i386/checksum.h
rename to arch/um/sys-i386/shared/sysdep/checksum.h
diff --git a/arch/um/include/sysdep-i386/faultinfo.h b/arch/um/sys-i386/shared/sysdep/faultinfo.h
similarity index 100%
rename from arch/um/include/sysdep-i386/faultinfo.h
rename to arch/um/sys-i386/shared/sysdep/faultinfo.h
diff --git a/arch/um/sys-i386/shared/sysdep/host_ldt.h b/arch/um/sys-i386/shared/sysdep/host_ldt.h
new file mode 100644
index 0000000..0953cc4
--- /dev/null
+++ b/arch/um/sys-i386/shared/sysdep/host_ldt.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_HOST_LDT_I386_H
+#define __ASM_HOST_LDT_I386_H
+
+#include <asm/ldt.h>
+
+/*
+ * macros stolen from include/asm-i386/desc.h
+ */
+#define LDT_entry_a(info) \
+	((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
+
+#define LDT_entry_b(info) \
+	(((info)->base_addr & 0xff000000) | \
+	(((info)->base_addr & 0x00ff0000) >> 16) | \
+	((info)->limit & 0xf0000) | \
+	(((info)->read_exec_only ^ 1) << 9) | \
+	((info)->contents << 10) | \
+	(((info)->seg_not_present ^ 1) << 15) | \
+	((info)->seg_32bit << 22) | \
+	((info)->limit_in_pages << 23) | \
+	((info)->useable << 20) | \
+	0x7000)
+
+#define LDT_empty(info) (\
+	(info)->base_addr	== 0	&& \
+	(info)->limit		== 0	&& \
+	(info)->contents	== 0	&& \
+	(info)->read_exec_only	== 1	&& \
+	(info)->seg_32bit	== 0	&& \
+	(info)->limit_in_pages	== 0	&& \
+	(info)->seg_not_present	== 1	&& \
+	(info)->useable		== 0	)
+
+#endif
diff --git a/arch/um/include/sysdep-i386/kernel-offsets.h b/arch/um/sys-i386/shared/sysdep/kernel-offsets.h
similarity index 100%
rename from arch/um/include/sysdep-i386/kernel-offsets.h
rename to arch/um/sys-i386/shared/sysdep/kernel-offsets.h
diff --git a/arch/um/sys-i386/shared/sysdep/ptrace.h b/arch/um/sys-i386/shared/sysdep/ptrace.h
new file mode 100644
index 0000000..d50e62e
--- /dev/null
+++ b/arch/um/sys-i386/shared/sysdep/ptrace.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_I386_PTRACE_H
+#define __SYSDEP_I386_PTRACE_H
+
+#include "user_constants.h"
+#include "sysdep/faultinfo.h"
+
+#define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long))
+#define MAX_REG_OFFSET (UM_FRAME_SIZE)
+
+static inline void update_debugregs(int seq) {}
+
+/* syscall emulation path in ptrace */
+
+#ifndef PTRACE_SYSEMU
+#define PTRACE_SYSEMU 31
+#endif
+
+void set_using_sysemu(int value);
+int get_using_sysemu(void);
+extern int sysemu_supported;
+
+#include "skas_ptregs.h"
+
+#define REGS_IP(r) ((r)[HOST_IP])
+#define REGS_SP(r) ((r)[HOST_SP])
+#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
+#define REGS_EAX(r) ((r)[HOST_EAX])
+#define REGS_EBX(r) ((r)[HOST_EBX])
+#define REGS_ECX(r) ((r)[HOST_ECX])
+#define REGS_EDX(r) ((r)[HOST_EDX])
+#define REGS_ESI(r) ((r)[HOST_ESI])
+#define REGS_EDI(r) ((r)[HOST_EDI])
+#define REGS_EBP(r) ((r)[HOST_EBP])
+#define REGS_CS(r) ((r)[HOST_CS])
+#define REGS_SS(r) ((r)[HOST_SS])
+#define REGS_DS(r) ((r)[HOST_DS])
+#define REGS_ES(r) ((r)[HOST_ES])
+#define REGS_FS(r) ((r)[HOST_FS])
+#define REGS_GS(r) ((r)[HOST_GS])
+
+#define REGS_SET_SYSCALL_RETURN(r, res) REGS_EAX(r) = (res)
+
+#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
+
+#ifndef PTRACE_SYSEMU_SINGLESTEP
+#define PTRACE_SYSEMU_SINGLESTEP 32
+#endif
+
+struct uml_pt_regs {
+	unsigned long gp[MAX_REG_NR];
+	struct faultinfo faultinfo;
+	long syscall;
+	int is_user;
+};
+
+#define EMPTY_UML_PT_REGS { }
+
+#define UPT_IP(r) REGS_IP((r)->gp)
+#define UPT_SP(r) REGS_SP((r)->gp)
+#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
+#define UPT_EAX(r) REGS_EAX((r)->gp)
+#define UPT_EBX(r) REGS_EBX((r)->gp)
+#define UPT_ECX(r) REGS_ECX((r)->gp)
+#define UPT_EDX(r) REGS_EDX((r)->gp)
+#define UPT_ESI(r) REGS_ESI((r)->gp)
+#define UPT_EDI(r) REGS_EDI((r)->gp)
+#define UPT_EBP(r) REGS_EBP((r)->gp)
+#define UPT_ORIG_EAX(r) ((r)->syscall)
+#define UPT_CS(r) REGS_CS((r)->gp)
+#define UPT_SS(r) REGS_SS((r)->gp)
+#define UPT_DS(r) REGS_DS((r)->gp)
+#define UPT_ES(r) REGS_ES((r)->gp)
+#define UPT_FS(r) REGS_FS((r)->gp)
+#define UPT_GS(r) REGS_GS((r)->gp)
+
+#define UPT_SYSCALL_ARG1(r) UPT_EBX(r)
+#define UPT_SYSCALL_ARG2(r) UPT_ECX(r)
+#define UPT_SYSCALL_ARG3(r) UPT_EDX(r)
+#define UPT_SYSCALL_ARG4(r) UPT_ESI(r)
+#define UPT_SYSCALL_ARG5(r) UPT_EDI(r)
+#define UPT_SYSCALL_ARG6(r) UPT_EBP(r)
+
+extern int user_context(unsigned long sp);
+
+#define UPT_IS_USER(r) ((r)->is_user)
+
+struct syscall_args {
+	unsigned long args[6];
+};
+
+#define SYSCALL_ARGS(r) ((struct syscall_args) \
+			 { .args = { UPT_SYSCALL_ARG1(r),	\
+				     UPT_SYSCALL_ARG2(r),	\
+				     UPT_SYSCALL_ARG3(r),	\
+				     UPT_SYSCALL_ARG4(r),	\
+				     UPT_SYSCALL_ARG5(r),	\
+				     UPT_SYSCALL_ARG6(r) } } )
+
+#define UPT_REG(regs, reg) \
+	({	unsigned long val; \
+		switch(reg){ \
+		case EIP: val = UPT_IP(regs); break; \
+		case UESP: val = UPT_SP(regs); break; \
+		case EAX: val = UPT_EAX(regs); break; \
+		case EBX: val = UPT_EBX(regs); break; \
+		case ECX: val = UPT_ECX(regs); break; \
+		case EDX: val = UPT_EDX(regs); break; \
+		case ESI: val = UPT_ESI(regs); break; \
+		case EDI: val = UPT_EDI(regs); break; \
+		case EBP: val = UPT_EBP(regs); break; \
+		case ORIG_EAX: val = UPT_ORIG_EAX(regs); break; \
+		case CS: val = UPT_CS(regs); break; \
+		case SS: val = UPT_SS(regs); break; \
+		case DS: val = UPT_DS(regs); break; \
+		case ES: val = UPT_ES(regs); break; \
+		case FS: val = UPT_FS(regs); break; \
+		case GS: val = UPT_GS(regs); break; \
+		case EFL: val = UPT_EFLAGS(regs); break; \
+		default :  \
+			panic("Bad register in UPT_REG : %d\n", reg);  \
+			val = -1; \
+		} \
+	        val; \
+	})
+
+#define UPT_SET(regs, reg, val) \
+	do { \
+		switch(reg){ \
+		case EIP: UPT_IP(regs) = val; break; \
+		case UESP: UPT_SP(regs) = val; break; \
+		case EAX: UPT_EAX(regs) = val; break; \
+		case EBX: UPT_EBX(regs) = val; break; \
+		case ECX: UPT_ECX(regs) = val; break; \
+		case EDX: UPT_EDX(regs) = val; break; \
+		case ESI: UPT_ESI(regs) = val; break; \
+		case EDI: UPT_EDI(regs) = val; break; \
+		case EBP: UPT_EBP(regs) = val; break; \
+		case ORIG_EAX: UPT_ORIG_EAX(regs) = val; break; \
+		case CS: UPT_CS(regs) = val; break; \
+		case SS: UPT_SS(regs) = val; break; \
+		case DS: UPT_DS(regs) = val; break; \
+		case ES: UPT_ES(regs) = val; break; \
+		case FS: UPT_FS(regs) = val; break; \
+		case GS: UPT_GS(regs) = val; break; \
+		case EFL: UPT_EFLAGS(regs) = val; break; \
+		default :  \
+			panic("Bad register in UPT_SET : %d\n", reg);  \
+			break; \
+		} \
+	} while (0)
+
+#define UPT_SET_SYSCALL_RETURN(r, res) \
+	REGS_SET_SYSCALL_RETURN((r)->regs, (res))
+
+#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
+
+#define UPT_ORIG_SYSCALL(r) UPT_EAX(r)
+#define UPT_SYSCALL_NR(r) UPT_ORIG_EAX(r)
+#define UPT_SYSCALL_RET(r) UPT_EAX(r)
+
+#define UPT_FAULTINFO(r) (&(r)->faultinfo)
+
+extern void arch_init_registers(int pid);
+
+#endif
diff --git a/arch/um/include/sysdep-i386/ptrace_user.h b/arch/um/sys-i386/shared/sysdep/ptrace_user.h
similarity index 100%
rename from arch/um/include/sysdep-i386/ptrace_user.h
rename to arch/um/sys-i386/shared/sysdep/ptrace_user.h
diff --git a/arch/um/include/sysdep-i386/sc.h b/arch/um/sys-i386/shared/sysdep/sc.h
similarity index 100%
rename from arch/um/include/sysdep-i386/sc.h
rename to arch/um/sys-i386/shared/sysdep/sc.h
diff --git a/arch/um/include/sysdep-i386/sigcontext.h b/arch/um/sys-i386/shared/sysdep/sigcontext.h
similarity index 100%
rename from arch/um/include/sysdep-i386/sigcontext.h
rename to arch/um/sys-i386/shared/sysdep/sigcontext.h
diff --git a/arch/um/include/sysdep-i386/skas_ptrace.h b/arch/um/sys-i386/shared/sysdep/skas_ptrace.h
similarity index 100%
rename from arch/um/include/sysdep-i386/skas_ptrace.h
rename to arch/um/sys-i386/shared/sysdep/skas_ptrace.h
diff --git a/arch/um/sys-i386/shared/sysdep/stub.h b/arch/um/sys-i386/shared/sysdep/stub.h
new file mode 100644
index 0000000..977dedd
--- /dev/null
+++ b/arch/um/sys-i386/shared/sysdep/stub.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_STUB_H
+#define __SYSDEP_STUB_H
+
+#include <sys/mman.h>
+#include <asm/ptrace.h>
+#include <asm/unistd.h>
+#include "as-layout.h"
+#include "stub-data.h"
+#include "kern_constants.h"
+
+extern void stub_segv_handler(int sig);
+extern void stub_clone_handler(void);
+
+#define STUB_SYSCALL_RET EAX
+#define STUB_MMAP_NR __NR_mmap2
+#define MMAP_OFFSET(o) ((o) >> UM_KERN_PAGE_SHIFT)
+
+static inline long stub_syscall0(long syscall)
+{
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall));
+
+	return ret;
+}
+
+static inline long stub_syscall1(long syscall, long arg1)
+{
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1));
+
+	return ret;
+}
+
+static inline long stub_syscall2(long syscall, long arg1, long arg2)
+{
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
+			"c" (arg2));
+
+	return ret;
+}
+
+static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
+{
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
+			"c" (arg2), "d" (arg3));
+
+	return ret;
+}
+
+static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
+				 long arg4)
+{
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
+			"c" (arg2), "d" (arg3), "S" (arg4));
+
+	return ret;
+}
+
+static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
+				 long arg4, long arg5)
+{
+	long ret;
+
+	__asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1),
+			"c" (arg2), "d" (arg3), "S" (arg4), "D" (arg5));
+
+	return ret;
+}
+
+static inline void trap_myself(void)
+{
+	__asm("int3");
+}
+
+static inline void remap_stack(int fd, unsigned long offset)
+{
+	__asm__ volatile ("movl %%eax,%%ebp ; movl %0,%%eax ; int $0x80 ;"
+			  "movl %7, %%ebx ; movl %%eax, (%%ebx)"
+			  : : "g" (STUB_MMAP_NR), "b" (STUB_DATA),
+			    "c" (UM_KERN_PAGE_SIZE),
+			    "d" (PROT_READ | PROT_WRITE),
+			    "S" (MAP_FIXED | MAP_SHARED), "D" (fd),
+			    "a" (offset),
+			    "i" (&((struct stub_data *) STUB_DATA)->err)
+			  : "memory");
+}
+
+#endif
diff --git a/arch/um/include/sysdep-i386/syscalls.h b/arch/um/sys-i386/shared/sysdep/syscalls.h
similarity index 100%
rename from arch/um/include/sysdep-i386/syscalls.h
rename to arch/um/sys-i386/shared/sysdep/syscalls.h
diff --git a/arch/um/sys-i386/shared/sysdep/system.h b/arch/um/sys-i386/shared/sysdep/system.h
new file mode 100644
index 0000000..d1b93c4
--- /dev/null
+++ b/arch/um/sys-i386/shared/sysdep/system.h
@@ -0,0 +1,132 @@
+#ifndef _ASM_X86_SYSTEM_H_
+#define _ASM_X86_SYSTEM_H_
+
+#include <asm/asm.h>
+#include <asm/segment.h>
+#include <asm/cpufeature.h>
+#include <asm/cmpxchg.h>
+#include <asm/nops.h>
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+
+/* entries in ARCH_DLINFO: */
+#ifdef CONFIG_IA32_EMULATION
+# define AT_VECTOR_SIZE_ARCH 2
+#else
+# define AT_VECTOR_SIZE_ARCH 1
+#endif
+
+extern unsigned long arch_align_stack(unsigned long sp);
+
+void default_idle(void);
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ */
+#ifdef CONFIG_X86_32
+/*
+ * Some non-Intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
+#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
+#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+#else
+#define mb() 	asm volatile("mfence":::"memory")
+#define rmb()	asm volatile("lfence":::"memory")
+#define wmb()	asm volatile("sfence" ::: "memory")
+#endif
+
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like this where there are no data dependencies.
+ **/
+
+#define read_barrier_depends()	do { } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#ifdef CONFIG_X86_PPRO_FENCE
+# define smp_rmb()	rmb()
+#else
+# define smp_rmb()	barrier()
+#endif
+#ifdef CONFIG_X86_OOSTORE
+# define smp_wmb() 	wmb()
+#else
+# define smp_wmb()	barrier()
+#endif
+#define smp_read_barrier_depends()	read_barrier_depends()
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while (0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+#endif
+
+/*
+ * Stop RDTSC speculation. This is needed when you need to use RDTSC
+ * (or get_cycles or vread that possibly accesses the TSC) in a defined
+ * code region.
+ *
+ * (Could use an alternative three way for this if there was one.)
+ */
+static inline void rdtsc_barrier(void)
+{
+	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
+	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
+}
+
+#endif
diff --git a/arch/um/sys-i386/shared/sysdep/tls.h b/arch/um/sys-i386/shared/sysdep/tls.h
new file mode 100644
index 0000000..3455075
--- /dev/null
+++ b/arch/um/sys-i386/shared/sysdep/tls.h
@@ -0,0 +1,32 @@
+#ifndef _SYSDEP_TLS_H
+#define _SYSDEP_TLS_H
+
+# ifndef __KERNEL__
+
+/* Change name to avoid conflicts with the original one from <asm/ldt.h>, which
+ * may be named user_desc (but in 2.4 and in header matching its API was named
+ * modify_ldt_ldt_s). */
+
+typedef struct um_dup_user_desc {
+	unsigned int  entry_number;
+	unsigned int  base_addr;
+	unsigned int  limit;
+	unsigned int  seg_32bit:1;
+	unsigned int  contents:2;
+	unsigned int  read_exec_only:1;
+	unsigned int  limit_in_pages:1;
+	unsigned int  seg_not_present:1;
+	unsigned int  useable:1;
+} user_desc_t;
+
+# else /* __KERNEL__ */
+
+#  include <ldt.h>
+typedef struct user_desc user_desc_t;
+
+# endif /* __KERNEL__ */
+
+#define GDT_ENTRY_TLS_MIN_I386 6
+#define GDT_ENTRY_TLS_MIN_X86_64 12
+
+#endif /* _SYSDEP_TLS_H */
diff --git a/include/asm-um/vm-flags-i386.h b/arch/um/sys-i386/shared/sysdep/vm-flags.h
similarity index 100%
rename from include/asm-um/vm-flags-i386.h
rename to arch/um/sys-i386/shared/sysdep/vm-flags.h
diff --git a/arch/um/sys-i386/stub.S b/arch/um/sys-i386/stub.S
index 7699e89..c41b04b 100644
--- a/arch/um/sys-i386/stub.S
+++ b/arch/um/sys-i386/stub.S
@@ -1,4 +1,3 @@
-#include "uml-config.h"
 #include "as-layout.h"
 
 	.globl syscall_stub
diff --git a/arch/um/sys-i386/syscalls.c b/arch/um/sys-i386/syscalls.c
index e2d1426..857ca0b 100644
--- a/arch/um/sys-i386/syscalls.c
+++ b/arch/um/sys-i386/syscalls.c
@@ -6,6 +6,7 @@
 #include "linux/sched.h"
 #include "linux/shm.h"
 #include "linux/ipc.h"
+#include "linux/syscalls.h"
 #include "asm/mman.h"
 #include "asm/uaccess.h"
 #include "asm/unistd.h"
diff --git a/arch/um/include/sysdep-ia64/ptrace.h b/arch/um/sys-ia64/sysdep/ptrace.h
similarity index 100%
rename from arch/um/include/sysdep-ia64/ptrace.h
rename to arch/um/sys-ia64/sysdep/ptrace.h
diff --git a/arch/um/include/sysdep-ia64/sigcontext.h b/arch/um/sys-ia64/sysdep/sigcontext.h
similarity index 100%
rename from arch/um/include/sysdep-ia64/sigcontext.h
rename to arch/um/sys-ia64/sysdep/sigcontext.h
diff --git a/arch/um/include/sysdep-ia64/skas_ptrace.h b/arch/um/sys-ia64/sysdep/skas_ptrace.h
similarity index 100%
rename from arch/um/include/sysdep-ia64/skas_ptrace.h
rename to arch/um/sys-ia64/sysdep/skas_ptrace.h
diff --git a/arch/um/include/sysdep-ia64/syscalls.h b/arch/um/sys-ia64/sysdep/syscalls.h
similarity index 100%
rename from arch/um/include/sysdep-ia64/syscalls.h
rename to arch/um/sys-ia64/sysdep/syscalls.h
diff --git a/include/asm-um/archparam-ppc.h b/arch/um/sys-ppc/asm/archparam.h
similarity index 100%
rename from include/asm-um/archparam-ppc.h
rename to arch/um/sys-ppc/asm/archparam.h
diff --git a/include/asm-um/elf-ppc.h b/arch/um/sys-ppc/asm/elf.h
similarity index 100%
rename from include/asm-um/elf-ppc.h
rename to arch/um/sys-ppc/asm/elf.h
diff --git a/include/asm-um/processor-ppc.h b/arch/um/sys-ppc/asm/processor.h
similarity index 100%
rename from include/asm-um/processor-ppc.h
rename to arch/um/sys-ppc/asm/processor.h
diff --git a/arch/um/include/sysdep-ppc/ptrace.h b/arch/um/sys-ppc/shared/sysdep/ptrace.h
similarity index 100%
rename from arch/um/include/sysdep-ppc/ptrace.h
rename to arch/um/sys-ppc/shared/sysdep/ptrace.h
diff --git a/arch/um/include/sysdep-ppc/sigcontext.h b/arch/um/sys-ppc/shared/sysdep/sigcontext.h
similarity index 100%
rename from arch/um/include/sysdep-ppc/sigcontext.h
rename to arch/um/sys-ppc/shared/sysdep/sigcontext.h
diff --git a/arch/um/include/sysdep-ppc/skas_ptrace.h b/arch/um/sys-ppc/shared/sysdep/skas_ptrace.h
similarity index 100%
rename from arch/um/include/sysdep-ppc/skas_ptrace.h
rename to arch/um/sys-ppc/shared/sysdep/skas_ptrace.h
diff --git a/arch/um/include/sysdep-ppc/syscalls.h b/arch/um/sys-ppc/shared/sysdep/syscalls.h
similarity index 100%
rename from arch/um/include/sysdep-ppc/syscalls.h
rename to arch/um/sys-ppc/shared/sysdep/syscalls.h
diff --git a/include/asm-um/archparam-x86_64.h b/arch/um/sys-x86_64/asm/archparam.h
similarity index 100%
rename from include/asm-um/archparam-x86_64.h
rename to arch/um/sys-x86_64/asm/archparam.h
diff --git a/include/asm-um/elf-x86_64.h b/arch/um/sys-x86_64/asm/elf.h
similarity index 100%
rename from include/asm-um/elf-x86_64.h
rename to arch/um/sys-x86_64/asm/elf.h
diff --git a/include/asm-um/module-x86_64.h b/arch/um/sys-x86_64/asm/module.h
similarity index 100%
rename from include/asm-um/module-x86_64.h
rename to arch/um/sys-x86_64/asm/module.h
diff --git a/arch/um/sys-x86_64/asm/processor.h b/arch/um/sys-x86_64/asm/processor.h
new file mode 100644
index 0000000..875a26a
--- /dev/null
+++ b/arch/um/sys-x86_64/asm/processor.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PROCESSOR_X86_64_H
+#define __UM_PROCESSOR_X86_64_H
+
+/* include faultinfo structure */
+#include "sysdep/faultinfo.h"
+
+struct arch_thread {
+        unsigned long debugregs[8];
+        int debugregs_seq;
+        unsigned long fs;
+        struct faultinfo faultinfo;
+};
+
+/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
+static inline void rep_nop(void)
+{
+	__asm__ __volatile__("rep;nop": : :"memory");
+}
+
+#define cpu_relax()   rep_nop()
+
+#define INIT_ARCH_THREAD { .debugregs  		= { [ 0 ... 7 ] = 0 }, \
+			   .debugregs_seq	= 0, \
+			   .fs			= 0, \
+			   .faultinfo		= { 0, 0, 0 } }
+
+static inline void arch_flush_thread(struct arch_thread *thread)
+{
+}
+
+static inline void arch_copy_thread(struct arch_thread *from,
+                                    struct arch_thread *to)
+{
+	to->fs = from->fs;
+}
+
+#include <asm/user.h>
+
+#define current_text_addr() \
+	({ void *pc; __asm__("movq $1f,%0\n1:":"=g" (pc)); pc; })
+
+#define ARCH_IS_STACKGROW(address) \
+        (address + 128 >= UPT_SP(&current->thread.regs.regs))
+
+#define KSTK_EIP(tsk) KSTK_REG(tsk, RIP)
+#define KSTK_ESP(tsk) KSTK_REG(tsk, RSP)
+
+#include "asm/processor-generic.h"
+
+#endif
diff --git a/arch/um/sys-x86_64/asm/ptrace.h b/arch/um/sys-x86_64/asm/ptrace.h
new file mode 100644
index 0000000..83d8c47
--- /dev/null
+++ b/arch/um/sys-x86_64/asm/ptrace.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __UM_PTRACE_X86_64_H
+#define __UM_PTRACE_X86_64_H
+
+#include "linux/compiler.h"
+#include "asm/errno.h"
+
+#define __FRAME_OFFSETS /* Needed to get the R* macros */
+#include "asm/ptrace-generic.h"
+
+#define HOST_AUDIT_ARCH AUDIT_ARCH_X86_64
+
+#define PT_REGS_RBX(r) UPT_RBX(&(r)->regs)
+#define PT_REGS_RCX(r) UPT_RCX(&(r)->regs)
+#define PT_REGS_RDX(r) UPT_RDX(&(r)->regs)
+#define PT_REGS_RSI(r) UPT_RSI(&(r)->regs)
+#define PT_REGS_RDI(r) UPT_RDI(&(r)->regs)
+#define PT_REGS_RBP(r) UPT_RBP(&(r)->regs)
+#define PT_REGS_RAX(r) UPT_RAX(&(r)->regs)
+#define PT_REGS_R8(r) UPT_R8(&(r)->regs)
+#define PT_REGS_R9(r) UPT_R9(&(r)->regs)
+#define PT_REGS_R10(r) UPT_R10(&(r)->regs)
+#define PT_REGS_R11(r) UPT_R11(&(r)->regs)
+#define PT_REGS_R12(r) UPT_R12(&(r)->regs)
+#define PT_REGS_R13(r) UPT_R13(&(r)->regs)
+#define PT_REGS_R14(r) UPT_R14(&(r)->regs)
+#define PT_REGS_R15(r) UPT_R15(&(r)->regs)
+
+#define PT_REGS_FS(r) UPT_FS(&(r)->regs)
+#define PT_REGS_GS(r) UPT_GS(&(r)->regs)
+#define PT_REGS_DS(r) UPT_DS(&(r)->regs)
+#define PT_REGS_ES(r) UPT_ES(&(r)->regs)
+#define PT_REGS_SS(r) UPT_SS(&(r)->regs)
+#define PT_REGS_CS(r) UPT_CS(&(r)->regs)
+
+#define PT_REGS_ORIG_RAX(r) UPT_ORIG_RAX(&(r)->regs)
+#define PT_REGS_RIP(r) UPT_IP(&(r)->regs)
+#define PT_REGS_RSP(r) UPT_SP(&(r)->regs)
+
+#define PT_REGS_EFLAGS(r) UPT_EFLAGS(&(r)->regs)
+
+/* XXX */
+#define user_mode(r) UPT_IS_USER(&(r)->regs)
+#define PT_REGS_ORIG_SYSCALL(r) PT_REGS_RAX(r)
+#define PT_REGS_SYSCALL_RET(r) PT_REGS_RAX(r)
+
+#define PT_FIX_EXEC_STACK(sp) do ; while(0)
+
+#define profile_pc(regs) PT_REGS_IP(regs)
+
+struct user_desc;
+
+static inline int ptrace_get_thread_area(struct task_struct *child, int idx,
+                                         struct user_desc __user *user_desc)
+{
+        return -ENOSYS;
+}
+
+static inline int ptrace_set_thread_area(struct task_struct *child, int idx,
+                                         struct user_desc __user *user_desc)
+{
+        return -ENOSYS;
+}
+
+extern long arch_prctl(struct task_struct *task, int code,
+		       unsigned long __user *addr);
+#endif
diff --git a/arch/um/include/sysdep-x86_64/archsetjmp.h b/arch/um/sys-x86_64/shared/sysdep/archsetjmp.h
similarity index 100%
rename from arch/um/include/sysdep-x86_64/archsetjmp.h
rename to arch/um/sys-x86_64/shared/sysdep/archsetjmp.h
diff --git a/arch/um/include/sysdep-x86_64/barrier.h b/arch/um/sys-x86_64/shared/sysdep/barrier.h
similarity index 100%
rename from arch/um/include/sysdep-x86_64/barrier.h
rename to arch/um/sys-x86_64/shared/sysdep/barrier.h
diff --git a/arch/um/include/sysdep-x86_64/checksum.h b/arch/um/sys-x86_64/shared/sysdep/checksum.h
similarity index 100%
rename from arch/um/include/sysdep-x86_64/checksum.h
rename to arch/um/sys-x86_64/shared/sysdep/checksum.h
diff --git a/arch/um/include/sysdep-x86_64/faultinfo.h b/arch/um/sys-x86_64/shared/sysdep/faultinfo.h
similarity index 100%
rename from arch/um/include/sysdep-x86_64/faultinfo.h
rename to arch/um/sys-x86_64/shared/sysdep/faultinfo.h
diff --git a/arch/um/sys-x86_64/shared/sysdep/host_ldt.h b/arch/um/sys-x86_64/shared/sysdep/host_ldt.h
new file mode 100644
index 0000000..e8b1be1
--- /dev/null
+++ b/arch/um/sys-x86_64/shared/sysdep/host_ldt.h
@@ -0,0 +1,38 @@
+#ifndef __ASM_HOST_LDT_X86_64_H
+#define __ASM_HOST_LDT_X86_64_H
+
+#include <asm/ldt.h>
+
+/*
+ * macros stolen from include/asm-x86_64/desc.h
+ */
+#define LDT_entry_a(info) \
+	((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
+
+/* Don't allow setting of the lm bit. It is useless anyways because
+ * 64bit system calls require __USER_CS. */
+#define LDT_entry_b(info) \
+	(((info)->base_addr & 0xff000000) | \
+	(((info)->base_addr & 0x00ff0000) >> 16) | \
+	((info)->limit & 0xf0000) | \
+	(((info)->read_exec_only ^ 1) << 9) | \
+	((info)->contents << 10) | \
+	(((info)->seg_not_present ^ 1) << 15) | \
+	((info)->seg_32bit << 22) | \
+	((info)->limit_in_pages << 23) | \
+	((info)->useable << 20) | \
+	/* ((info)->lm << 21) | */ \
+	0x7000)
+
+#define LDT_empty(info) (\
+	(info)->base_addr	== 0	&& \
+	(info)->limit		== 0	&& \
+	(info)->contents	== 0	&& \
+	(info)->read_exec_only	== 1	&& \
+	(info)->seg_32bit	== 0	&& \
+	(info)->limit_in_pages	== 0	&& \
+	(info)->seg_not_present	== 1	&& \
+	(info)->useable		== 0	&& \
+	(info)->lm              == 0)
+
+#endif
diff --git a/arch/um/include/sysdep-x86_64/kernel-offsets.h b/arch/um/sys-x86_64/shared/sysdep/kernel-offsets.h
similarity index 100%
rename from arch/um/include/sysdep-x86_64/kernel-offsets.h
rename to arch/um/sys-x86_64/shared/sysdep/kernel-offsets.h
diff --git a/arch/um/sys-x86_64/shared/sysdep/ptrace.h b/arch/um/sys-x86_64/shared/sysdep/ptrace.h
new file mode 100644
index 0000000..fdba545
--- /dev/null
+++ b/arch/um/sys-x86_64/shared/sysdep/ptrace.h
@@ -0,0 +1,239 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_X86_64_PTRACE_H
+#define __SYSDEP_X86_64_PTRACE_H
+
+#include "user_constants.h"
+#include "sysdep/faultinfo.h"
+
+#define MAX_REG_OFFSET (UM_FRAME_SIZE)
+#define MAX_REG_NR ((MAX_REG_OFFSET) / sizeof(unsigned long))
+
+#include "skas_ptregs.h"
+
+#define REGS_IP(r) ((r)[HOST_IP])
+#define REGS_SP(r) ((r)[HOST_SP])
+
+#define REGS_RBX(r) ((r)[HOST_RBX])
+#define REGS_RCX(r) ((r)[HOST_RCX])
+#define REGS_RDX(r) ((r)[HOST_RDX])
+#define REGS_RSI(r) ((r)[HOST_RSI])
+#define REGS_RDI(r) ((r)[HOST_RDI])
+#define REGS_RBP(r) ((r)[HOST_RBP])
+#define REGS_RAX(r) ((r)[HOST_RAX])
+#define REGS_R8(r) ((r)[HOST_R8])
+#define REGS_R9(r) ((r)[HOST_R9])
+#define REGS_R10(r) ((r)[HOST_R10])
+#define REGS_R11(r) ((r)[HOST_R11])
+#define REGS_R12(r) ((r)[HOST_R12])
+#define REGS_R13(r) ((r)[HOST_R13])
+#define REGS_R14(r) ((r)[HOST_R14])
+#define REGS_R15(r) ((r)[HOST_R15])
+#define REGS_CS(r) ((r)[HOST_CS])
+#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
+#define REGS_SS(r) ((r)[HOST_SS])
+
+#define HOST_FS_BASE 21
+#define HOST_GS_BASE 22
+#define HOST_DS 23
+#define HOST_ES 24
+#define HOST_FS 25
+#define HOST_GS 26
+
+/* Also defined in asm/ptrace-x86_64.h, but not in libc headers.  So, these
+ * are already defined for kernel code, but not for userspace code.
+ */
+#ifndef FS_BASE
+/* These aren't defined in ptrace.h, but exist in struct user_regs_struct,
+ * which is what x86_64 ptrace actually uses.
+ */
+#define FS_BASE (HOST_FS_BASE * sizeof(long))
+#define GS_BASE (HOST_GS_BASE * sizeof(long))
+#define DS (HOST_DS * sizeof(long))
+#define ES (HOST_ES * sizeof(long))
+#define FS (HOST_FS * sizeof(long))
+#define GS (HOST_GS * sizeof(long))
+#endif
+
+#define REGS_FS_BASE(r) ((r)[HOST_FS_BASE])
+#define REGS_GS_BASE(r) ((r)[HOST_GS_BASE])
+#define REGS_DS(r) ((r)[HOST_DS])
+#define REGS_ES(r) ((r)[HOST_ES])
+#define REGS_FS(r) ((r)[HOST_FS])
+#define REGS_GS(r) ((r)[HOST_GS])
+
+#define REGS_ORIG_RAX(r) ((r)[HOST_ORIG_RAX])
+
+#define REGS_SET_SYSCALL_RETURN(r, res) REGS_RAX(r) = (res)
+
+#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
+
+#define REGS_SEGV_IS_FIXABLE(r) SEGV_IS_FIXABLE((r)->trap_type)
+
+#define REGS_FAULT_ADDR(r) ((r)->fault_addr)
+
+#define REGS_FAULT_WRITE(r) FAULT_WRITE((r)->fault_type)
+
+#define REGS_TRAP(r) ((r)->trap_type)
+
+#define REGS_ERR(r) ((r)->fault_type)
+
+struct uml_pt_regs {
+	unsigned long gp[MAX_REG_NR];
+	struct faultinfo faultinfo;
+	long syscall;
+	int is_user;
+};
+
+#define EMPTY_UML_PT_REGS { }
+
+#define UPT_RBX(r) REGS_RBX((r)->gp)
+#define UPT_RCX(r) REGS_RCX((r)->gp)
+#define UPT_RDX(r) REGS_RDX((r)->gp)
+#define UPT_RSI(r) REGS_RSI((r)->gp)
+#define UPT_RDI(r) REGS_RDI((r)->gp)
+#define UPT_RBP(r) REGS_RBP((r)->gp)
+#define UPT_RAX(r) REGS_RAX((r)->gp)
+#define UPT_R8(r) REGS_R8((r)->gp)
+#define UPT_R9(r) REGS_R9((r)->gp)
+#define UPT_R10(r) REGS_R10((r)->gp)
+#define UPT_R11(r) REGS_R11((r)->gp)
+#define UPT_R12(r) REGS_R12((r)->gp)
+#define UPT_R13(r) REGS_R13((r)->gp)
+#define UPT_R14(r) REGS_R14((r)->gp)
+#define UPT_R15(r) REGS_R15((r)->gp)
+#define UPT_CS(r) REGS_CS((r)->gp)
+#define UPT_FS_BASE(r) REGS_FS_BASE((r)->gp)
+#define UPT_FS(r) REGS_FS((r)->gp)
+#define UPT_GS_BASE(r) REGS_GS_BASE((r)->gp)
+#define UPT_GS(r) REGS_GS((r)->gp)
+#define UPT_DS(r) REGS_DS((r)->gp)
+#define UPT_ES(r) REGS_ES((r)->gp)
+#define UPT_CS(r) REGS_CS((r)->gp)
+#define UPT_SS(r) REGS_SS((r)->gp)
+#define UPT_ORIG_RAX(r) REGS_ORIG_RAX((r)->gp)
+
+#define UPT_IP(r) REGS_IP((r)->gp)
+#define UPT_SP(r) REGS_SP((r)->gp)
+
+#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
+#define UPT_SYSCALL_NR(r) ((r)->syscall)
+#define UPT_SYSCALL_RET(r) UPT_RAX(r)
+
+extern int user_context(unsigned long sp);
+
+#define UPT_IS_USER(r) ((r)->is_user)
+
+#define UPT_SYSCALL_ARG1(r) UPT_RDI(r)
+#define UPT_SYSCALL_ARG2(r) UPT_RSI(r)
+#define UPT_SYSCALL_ARG3(r) UPT_RDX(r)
+#define UPT_SYSCALL_ARG4(r) UPT_R10(r)
+#define UPT_SYSCALL_ARG5(r) UPT_R8(r)
+#define UPT_SYSCALL_ARG6(r) UPT_R9(r)
+
+struct syscall_args {
+	unsigned long args[6];
+};
+
+#define SYSCALL_ARGS(r) ((struct syscall_args) \
+			 { .args = { UPT_SYSCALL_ARG1(r),	 \
+				     UPT_SYSCALL_ARG2(r),	 \
+				     UPT_SYSCALL_ARG3(r),	 \
+				     UPT_SYSCALL_ARG4(r),	 \
+				     UPT_SYSCALL_ARG5(r),	 \
+				     UPT_SYSCALL_ARG6(r) } } )
+
+#define UPT_REG(regs, reg) \
+	({      unsigned long val;		\
+		switch(reg){						\
+		case R8: val = UPT_R8(regs); break;			\
+		case R9: val = UPT_R9(regs); break;			\
+		case R10: val = UPT_R10(regs); break;			\
+		case R11: val = UPT_R11(regs); break;			\
+		case R12: val = UPT_R12(regs); break;			\
+		case R13: val = UPT_R13(regs); break;			\
+		case R14: val = UPT_R14(regs); break;			\
+		case R15: val = UPT_R15(regs); break;			\
+		case RIP: val = UPT_IP(regs); break;			\
+		case RSP: val = UPT_SP(regs); break;			\
+		case RAX: val = UPT_RAX(regs); break;			\
+		case RBX: val = UPT_RBX(regs); break;			\
+		case RCX: val = UPT_RCX(regs); break;			\
+		case RDX: val = UPT_RDX(regs); break;			\
+		case RSI: val = UPT_RSI(regs); break;			\
+		case RDI: val = UPT_RDI(regs); break;			\
+		case RBP: val = UPT_RBP(regs); break;			\
+		case ORIG_RAX: val = UPT_ORIG_RAX(regs); break;		\
+		case CS: val = UPT_CS(regs); break;			\
+		case SS: val = UPT_SS(regs); break;			\
+		case FS_BASE: val = UPT_FS_BASE(regs); break;		\
+		case GS_BASE: val = UPT_GS_BASE(regs); break;		\
+		case DS: val = UPT_DS(regs); break;			\
+		case ES: val = UPT_ES(regs); break;			\
+		case FS : val = UPT_FS (regs); break;			\
+		case GS: val = UPT_GS(regs); break;			\
+		case EFLAGS: val = UPT_EFLAGS(regs); break;		\
+		default :						\
+			panic("Bad register in UPT_REG : %d\n", reg);	\
+			val = -1;					\
+		}							\
+		val;							\
+	})
+
+
+#define UPT_SET(regs, reg, val) \
+	({      unsigned long __upt_val = val;	\
+		switch(reg){						\
+		case R8: UPT_R8(regs) = __upt_val; break;		\
+		case R9: UPT_R9(regs) = __upt_val; break;		\
+		case R10: UPT_R10(regs) = __upt_val; break;		\
+		case R11: UPT_R11(regs) = __upt_val; break;		\
+		case R12: UPT_R12(regs) = __upt_val; break;		\
+		case R13: UPT_R13(regs) = __upt_val; break;		\
+		case R14: UPT_R14(regs) = __upt_val; break;		\
+		case R15: UPT_R15(regs) = __upt_val; break;		\
+		case RIP: UPT_IP(regs) = __upt_val; break;		\
+		case RSP: UPT_SP(regs) = __upt_val; break;		\
+		case RAX: UPT_RAX(regs) = __upt_val; break;		\
+		case RBX: UPT_RBX(regs) = __upt_val; break;		\
+		case RCX: UPT_RCX(regs) = __upt_val; break;		\
+		case RDX: UPT_RDX(regs) = __upt_val; break;		\
+		case RSI: UPT_RSI(regs) = __upt_val; break;		\
+		case RDI: UPT_RDI(regs) = __upt_val; break;		\
+		case RBP: UPT_RBP(regs) = __upt_val; break;		\
+		case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break;	\
+		case CS: UPT_CS(regs) = __upt_val; break;		\
+		case SS: UPT_SS(regs) = __upt_val; break;		\
+		case FS_BASE: UPT_FS_BASE(regs) = __upt_val; break;	\
+		case GS_BASE: UPT_GS_BASE(regs) = __upt_val; break;	\
+		case DS: UPT_DS(regs) = __upt_val; break;		\
+		case ES: UPT_ES(regs) = __upt_val; break;		\
+		case FS: UPT_FS(regs) = __upt_val; break;		\
+		case GS: UPT_GS(regs) = __upt_val; break;		\
+		case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break;	\
+		default :						\
+			panic("Bad register in UPT_SET : %d\n", reg);	\
+			break;						\
+		}							\
+		__upt_val;						\
+	})
+
+#define UPT_SET_SYSCALL_RETURN(r, res) \
+	REGS_SET_SYSCALL_RETURN((r)->regs, (res))
+
+#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
+
+#define UPT_SEGV_IS_FIXABLE(r) REGS_SEGV_IS_FIXABLE(&r->skas)
+
+#define UPT_FAULTINFO(r) (&(r)->faultinfo)
+
+static inline void arch_init_registers(int pid)
+{
+}
+
+#endif
diff --git a/arch/um/include/sysdep-x86_64/ptrace_user.h b/arch/um/sys-x86_64/shared/sysdep/ptrace_user.h
similarity index 100%
rename from arch/um/include/sysdep-x86_64/ptrace_user.h
rename to arch/um/sys-x86_64/shared/sysdep/ptrace_user.h
diff --git a/arch/um/include/sysdep-x86_64/sc.h b/arch/um/sys-x86_64/shared/sysdep/sc.h
similarity index 100%
rename from arch/um/include/sysdep-x86_64/sc.h
rename to arch/um/sys-x86_64/shared/sysdep/sc.h
diff --git a/arch/um/include/sysdep-x86_64/sigcontext.h b/arch/um/sys-x86_64/shared/sysdep/sigcontext.h
similarity index 100%
rename from arch/um/include/sysdep-x86_64/sigcontext.h
rename to arch/um/sys-x86_64/shared/sysdep/sigcontext.h
diff --git a/arch/um/include/sysdep-x86_64/skas_ptrace.h b/arch/um/sys-x86_64/shared/sysdep/skas_ptrace.h
similarity index 100%
rename from arch/um/include/sysdep-x86_64/skas_ptrace.h
rename to arch/um/sys-x86_64/shared/sysdep/skas_ptrace.h
diff --git a/arch/um/sys-x86_64/shared/sysdep/stub.h b/arch/um/sys-x86_64/shared/sysdep/stub.h
new file mode 100644
index 0000000..3432aa2
--- /dev/null
+++ b/arch/um/sys-x86_64/shared/sysdep/stub.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_STUB_H
+#define __SYSDEP_STUB_H
+
+#include <sys/mman.h>
+#include <asm/unistd.h>
+#include <sysdep/ptrace_user.h>
+#include "as-layout.h"
+#include "stub-data.h"
+#include "kern_constants.h"
+
+extern void stub_segv_handler(int sig);
+extern void stub_clone_handler(void);
+
+#define STUB_SYSCALL_RET PT_INDEX(RAX)
+#define STUB_MMAP_NR __NR_mmap
+#define MMAP_OFFSET(o) (o)
+
+#define __syscall_clobber "r11","rcx","memory"
+#define __syscall "syscall"
+
+static inline long stub_syscall0(long syscall)
+{
+	long ret;
+
+	__asm__ volatile (__syscall
+		: "=a" (ret)
+		: "0" (syscall) : __syscall_clobber );
+
+	return ret;
+}
+
+static inline long stub_syscall2(long syscall, long arg1, long arg2)
+{
+	long ret;
+
+	__asm__ volatile (__syscall
+		: "=a" (ret)
+		: "0" (syscall), "D" (arg1), "S" (arg2) : __syscall_clobber );
+
+	return ret;
+}
+
+static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3)
+{
+	long ret;
+
+	__asm__ volatile (__syscall
+		: "=a" (ret)
+		: "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3)
+		: __syscall_clobber );
+
+	return ret;
+}
+
+static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3,
+				 long arg4)
+{
+	long ret;
+
+	__asm__ volatile ("movq %5,%%r10 ; " __syscall
+		: "=a" (ret)
+		: "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3),
+		  "g" (arg4)
+		: __syscall_clobber, "r10" );
+
+	return ret;
+}
+
+static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3,
+				 long arg4, long arg5)
+{
+	long ret;
+
+	__asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; " __syscall
+		: "=a" (ret)
+		: "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3),
+		  "g" (arg4), "g" (arg5)
+		: __syscall_clobber, "r10", "r8" );
+
+	return ret;
+}
+
+static inline void trap_myself(void)
+{
+	__asm("int3");
+}
+
+static inline void remap_stack(long fd, unsigned long offset)
+{
+	__asm__ volatile ("movq %4,%%r10 ; movq %5,%%r8 ; "
+			  "movq %6, %%r9; " __syscall "; movq %7, %%rbx ; "
+			  "movq %%rax, (%%rbx)":
+			  : "a" (STUB_MMAP_NR), "D" (STUB_DATA),
+			    "S" (UM_KERN_PAGE_SIZE),
+			    "d" (PROT_READ | PROT_WRITE),
+                            "g" (MAP_FIXED | MAP_SHARED), "g" (fd),
+			    "g" (offset),
+			    "i" (&((struct stub_data *) STUB_DATA)->err)
+			  : __syscall_clobber, "r10", "r8", "r9" );
+}
+
+#endif
diff --git a/arch/um/include/sysdep-x86_64/syscalls.h b/arch/um/sys-x86_64/shared/sysdep/syscalls.h
similarity index 100%
rename from arch/um/include/sysdep-x86_64/syscalls.h
rename to arch/um/sys-x86_64/shared/sysdep/syscalls.h
diff --git a/arch/um/sys-x86_64/shared/sysdep/system.h b/arch/um/sys-x86_64/shared/sysdep/system.h
new file mode 100644
index 0000000..d1b93c4
--- /dev/null
+++ b/arch/um/sys-x86_64/shared/sysdep/system.h
@@ -0,0 +1,132 @@
+#ifndef _ASM_X86_SYSTEM_H_
+#define _ASM_X86_SYSTEM_H_
+
+#include <asm/asm.h>
+#include <asm/segment.h>
+#include <asm/cpufeature.h>
+#include <asm/cmpxchg.h>
+#include <asm/nops.h>
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+
+/* entries in ARCH_DLINFO: */
+#ifdef CONFIG_IA32_EMULATION
+# define AT_VECTOR_SIZE_ARCH 2
+#else
+# define AT_VECTOR_SIZE_ARCH 1
+#endif
+
+extern unsigned long arch_align_stack(unsigned long sp);
+
+void default_idle(void);
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ */
+#ifdef CONFIG_X86_32
+/*
+ * Some non-Intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
+#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
+#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+#else
+#define mb() 	asm volatile("mfence":::"memory")
+#define rmb()	asm volatile("lfence":::"memory")
+#define wmb()	asm volatile("sfence" ::: "memory")
+#endif
+
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like this where there are no data dependencies.
+ **/
+
+#define read_barrier_depends()	do { } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#ifdef CONFIG_X86_PPRO_FENCE
+# define smp_rmb()	rmb()
+#else
+# define smp_rmb()	barrier()
+#endif
+#ifdef CONFIG_X86_OOSTORE
+# define smp_wmb() 	wmb()
+#else
+# define smp_wmb()	barrier()
+#endif
+#define smp_read_barrier_depends()	read_barrier_depends()
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while (0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+#endif
+
+/*
+ * Stop RDTSC speculation. This is needed when you need to use RDTSC
+ * (or get_cycles or vread that possibly accesses the TSC) in a defined
+ * code region.
+ *
+ * (Could use an alternative three way for this if there was one.)
+ */
+static inline void rdtsc_barrier(void)
+{
+	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
+	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
+}
+
+#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/tls.h b/arch/um/sys-x86_64/shared/sysdep/tls.h
new file mode 100644
index 0000000..18c000d
--- /dev/null
+++ b/arch/um/sys-x86_64/shared/sysdep/tls.h
@@ -0,0 +1,29 @@
+#ifndef _SYSDEP_TLS_H
+#define _SYSDEP_TLS_H
+
+# ifndef __KERNEL__
+
+/* Change name to avoid conflicts with the original one from <asm/ldt.h>, which
+ * may be named user_desc (but in 2.4 and in header matching its API was named
+ * modify_ldt_ldt_s). */
+
+typedef struct um_dup_user_desc {
+	unsigned int  entry_number;
+	unsigned int  base_addr;
+	unsigned int  limit;
+	unsigned int  seg_32bit:1;
+	unsigned int  contents:2;
+	unsigned int  read_exec_only:1;
+	unsigned int  limit_in_pages:1;
+	unsigned int  seg_not_present:1;
+	unsigned int  useable:1;
+	unsigned int  lm:1;
+} user_desc_t;
+
+# else /* __KERNEL__ */
+
+#  include <ldt.h>
+typedef struct user_desc user_desc_t;
+
+# endif /* __KERNEL__ */
+#endif /* _SYSDEP_TLS_H */
diff --git a/include/asm-um/vm-flags-x86_64.h b/arch/um/sys-x86_64/shared/sysdep/vm-flags.h
similarity index 100%
rename from include/asm-um/vm-flags-x86_64.h
rename to arch/um/sys-x86_64/shared/sysdep/vm-flags.h
diff --git a/arch/um/sys-x86_64/stub.S b/arch/um/sys-x86_64/stub.S
index 5687687..6d9edf9 100644
--- a/arch/um/sys-x86_64/stub.S
+++ b/arch/um/sys-x86_64/stub.S
@@ -1,4 +1,3 @@
-#include "uml-config.h"
 #include "as-layout.h"
 
 	.globl syscall_stub
diff --git a/arch/um/sys-x86_64/syscall_table.c b/arch/um/sys-x86_64/syscall_table.c
index 32f5fbe..dd21d69 100644
--- a/arch/um/sys-x86_64/syscall_table.c
+++ b/arch/um/sys-x86_64/syscall_table.c
@@ -41,12 +41,12 @@
 #define stub_rt_sigreturn sys_rt_sigreturn
 
 #define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
-#undef ASM_X86__UNISTD_64_H
-#include <asm-x86/unistd_64.h>
+#undef _ASM_X86_UNISTD_64_H
+#include "../../x86/include/asm/unistd_64.h"
 
 #undef __SYSCALL
 #define __SYSCALL(nr, sym) [ nr ] = sym,
-#undef ASM_X86__UNISTD_64_H
+#undef _ASM_X86_UNISTD_64_H
 
 typedef void (*sys_call_ptr_t)(void);
 
@@ -64,7 +64,7 @@
  */
 
 sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
-#include <asm-x86/unistd_64.h>
+#include "../../x86/include/asm/unistd_64.h"
 };
 
 int syscall_table_size = sizeof(sys_call_table);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5b9b123..350bee1 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -116,6 +116,9 @@
 config ARCH_HAS_CPU_RELAX
 	def_bool y
 
+config ARCH_HAS_DEFAULT_IDLE
+	def_bool y
+
 config ARCH_HAS_CACHE_LINE_SIZE
 	def_bool y
 
@@ -1635,6 +1638,8 @@
 
 source "drivers/cpuidle/Kconfig"
 
+source "drivers/idle/Kconfig"
+
 endmenu
 
 
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index f5631da..d1a47ad 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -110,16 +110,16 @@
 mcore-y  := arch/x86/mach-default/
 
 # Voyager subarch support
-mflags-$(CONFIG_X86_VOYAGER)	:= -Iinclude/asm-x86/mach-voyager
+mflags-$(CONFIG_X86_VOYAGER)	:= -Iarch/x86/include/asm/mach-voyager
 mcore-$(CONFIG_X86_VOYAGER)	:= arch/x86/mach-voyager/
 
 # generic subarchitecture
-mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
+mflags-$(CONFIG_X86_GENERICARCH):= -Iarch/x86/include/asm/mach-generic
 fcore-$(CONFIG_X86_GENERICARCH)	+= arch/x86/mach-generic/
 mcore-$(CONFIG_X86_GENERICARCH)	:= arch/x86/mach-default/
 
 # default subarch .h files
-mflags-y += -Iinclude/asm-x86/mach-default
+mflags-y += -Iarch/x86/include/asm/mach-default
 
 # 64 bit does not support subarch support - clear sub arch variables
 fcore-$(CONFIG_X86_64)  :=
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 5780d36..da06221 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -16,7 +16,7 @@
  */
 #undef CONFIG_PARAVIRT
 #ifdef CONFIG_X86_32
-#define ASM_X86__DESC_H 1
+#define _ASM_X86_DESC_H 1
 #endif
 
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c
index 49f26aa..3fa979c 100644
--- a/arch/x86/boot/video-bios.c
+++ b/arch/x86/boot/video-bios.c
@@ -17,7 +17,7 @@
 #include "boot.h"
 #include "video.h"
 
-__videocard video_bios;
+static __videocard video_bios;
 
 /* Set a conventional BIOS mode */
 static int set_bios_mode(u8 mode);
@@ -119,7 +119,7 @@
 	return nmodes;
 }
 
-__videocard video_bios =
+static __videocard video_bios =
 {
 	.card_name	= "BIOS",
 	.probe		= bios_probe,
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index 99b3079..7511584 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -20,7 +20,7 @@
 static struct vesa_general_info vginfo;
 static struct vesa_mode_info vminfo;
 
-__videocard video_vesa;
+static __videocard video_vesa;
 
 #ifndef _WAKEUP
 static void vesa_store_mode_params_graphics(void);
@@ -293,7 +293,7 @@
 
 #endif /* not _WAKEUP */
 
-__videocard video_vesa =
+static __videocard video_vesa =
 {
 	.card_name	= "VESA",
 	.probe		= vesa_probe,
diff --git a/include/asm-x86/Kbuild b/arch/x86/include/asm/Kbuild
similarity index 100%
rename from include/asm-x86/Kbuild
rename to arch/x86/include/asm/Kbuild
diff --git a/arch/x86/include/asm/a.out-core.h b/arch/x86/include/asm/a.out-core.h
new file mode 100644
index 0000000..3782220
--- /dev/null
+++ b/arch/x86/include/asm/a.out-core.h
@@ -0,0 +1,73 @@
+/* a.out coredump register dumper
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_X86_A_OUT_CORE_H
+#define _ASM_X86_A_OUT_CORE_H
+
+#ifdef __KERNEL__
+#ifdef CONFIG_X86_32
+
+#include <linux/user.h>
+#include <linux/elfcore.h>
+
+/*
+ * fill in the user structure for an a.out core dump
+ */
+static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
+{
+	u16 gs;
+
+/* changed the size calculations - should hopefully work better. lbt */
+	dump->magic = CMAGIC;
+	dump->start_code = 0;
+	dump->start_stack = regs->sp & ~(PAGE_SIZE - 1);
+	dump->u_tsize = ((unsigned long)current->mm->end_code) >> PAGE_SHIFT;
+	dump->u_dsize = ((unsigned long)(current->mm->brk + (PAGE_SIZE - 1)))
+			>> PAGE_SHIFT;
+	dump->u_dsize -= dump->u_tsize;
+	dump->u_ssize = 0;
+	dump->u_debugreg[0] = current->thread.debugreg0;
+	dump->u_debugreg[1] = current->thread.debugreg1;
+	dump->u_debugreg[2] = current->thread.debugreg2;
+	dump->u_debugreg[3] = current->thread.debugreg3;
+	dump->u_debugreg[4] = 0;
+	dump->u_debugreg[5] = 0;
+	dump->u_debugreg[6] = current->thread.debugreg6;
+	dump->u_debugreg[7] = current->thread.debugreg7;
+
+	if (dump->start_stack < TASK_SIZE)
+		dump->u_ssize = ((unsigned long)(TASK_SIZE - dump->start_stack))
+				>> PAGE_SHIFT;
+
+	dump->regs.bx = regs->bx;
+	dump->regs.cx = regs->cx;
+	dump->regs.dx = regs->dx;
+	dump->regs.si = regs->si;
+	dump->regs.di = regs->di;
+	dump->regs.bp = regs->bp;
+	dump->regs.ax = regs->ax;
+	dump->regs.ds = (u16)regs->ds;
+	dump->regs.es = (u16)regs->es;
+	dump->regs.fs = (u16)regs->fs;
+	savesegment(gs, gs);
+	dump->regs.orig_ax = regs->orig_ax;
+	dump->regs.ip = regs->ip;
+	dump->regs.cs = (u16)regs->cs;
+	dump->regs.flags = regs->flags;
+	dump->regs.sp = regs->sp;
+	dump->regs.ss = (u16)regs->ss;
+
+	dump->u_fpvalid = dump_fpu(regs, &dump->i387);
+}
+
+#endif /* CONFIG_X86_32 */
+#endif /* __KERNEL__ */
+#endif /* _ASM_X86_A_OUT_CORE_H */
diff --git a/arch/x86/include/asm/a.out.h b/arch/x86/include/asm/a.out.h
new file mode 100644
index 0000000..4684f97
--- /dev/null
+++ b/arch/x86/include/asm/a.out.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_X86_A_OUT_H
+#define _ASM_X86_A_OUT_H
+
+struct exec
+{
+	unsigned int a_info;	/* Use macros N_MAGIC, etc for access */
+	unsigned a_text;	/* length of text, in bytes */
+	unsigned a_data;	/* length of data, in bytes */
+	unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+	unsigned a_syms;	/* length of symbol table data in file, in bytes */
+	unsigned a_entry;	/* start address */
+	unsigned a_trsize;	/* length of relocation info for text, in bytes */
+	unsigned a_drsize;	/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#endif /* _ASM_X86_A_OUT_H */
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
new file mode 100644
index 0000000..8d676d8
--- /dev/null
+++ b/arch/x86/include/asm/acpi.h
@@ -0,0 +1,178 @@
+#ifndef _ASM_X86_ACPI_H
+#define _ASM_X86_ACPI_H
+
+/*
+ *  Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *  Copyright (C) 2001 Patrick Mochel <mochel@osdl.org>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+#include <acpi/pdc_intel.h>
+
+#include <asm/numa.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/mpspec.h>
+
+#define COMPILER_DEPENDENT_INT64   long long
+#define COMPILER_DEPENDENT_UINT64  unsigned long long
+
+/*
+ * Calling conventions:
+ *
+ * ACPI_SYSTEM_XFACE        - Interfaces to host OS (handlers, threads)
+ * ACPI_EXTERNAL_XFACE      - External ACPI interfaces
+ * ACPI_INTERNAL_XFACE      - Internal ACPI interfaces
+ * ACPI_INTERNAL_VAR_XFACE  - Internal variable-parameter list interfaces
+ */
+#define ACPI_SYSTEM_XFACE
+#define ACPI_EXTERNAL_XFACE
+#define ACPI_INTERNAL_XFACE
+#define ACPI_INTERNAL_VAR_XFACE
+
+/* Asm macros */
+
+#define ACPI_ASM_MACROS
+#define BREAKPOINT3
+#define ACPI_DISABLE_IRQS() local_irq_disable()
+#define ACPI_ENABLE_IRQS()  local_irq_enable()
+#define ACPI_FLUSH_CPU_CACHE()	wbinvd()
+
+int __acpi_acquire_global_lock(unsigned int *lock);
+int __acpi_release_global_lock(unsigned int *lock);
+
+#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \
+	((Acq) = __acpi_acquire_global_lock(&facs->global_lock))
+
+#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \
+	((Acq) = __acpi_release_global_lock(&facs->global_lock))
+
+/*
+ * Math helper asm macros
+ */
+#define ACPI_DIV_64_BY_32(n_hi, n_lo, d32, q32, r32) \
+	asm("divl %2;"				     \
+	    : "=a"(q32), "=d"(r32)		     \
+	    : "r"(d32),				     \
+	     "0"(n_lo), "1"(n_hi))
+
+
+#define ACPI_SHIFT_RIGHT_64(n_hi, n_lo) \
+	asm("shrl   $1,%2	;"	\
+	    "rcrl   $1,%3;"		\
+	    : "=r"(n_hi), "=r"(n_lo)	\
+	    : "0"(n_hi), "1"(n_lo))
+
+#ifdef CONFIG_ACPI
+extern int acpi_lapic;
+extern int acpi_ioapic;
+extern int acpi_noirq;
+extern int acpi_strict;
+extern int acpi_disabled;
+extern int acpi_ht;
+extern int acpi_pci_disabled;
+extern int acpi_skip_timer_override;
+extern int acpi_use_timer_override;
+
+extern u8 acpi_sci_flags;
+extern int acpi_sci_override_gsi;
+void acpi_pic_sci_set_trigger(unsigned int, u16);
+
+static inline void disable_acpi(void)
+{
+	acpi_disabled = 1;
+	acpi_ht = 0;
+	acpi_pci_disabled = 1;
+	acpi_noirq = 1;
+}
+
+/* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */
+#define FIX_ACPI_PAGES 4
+
+extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
+
+static inline void acpi_noirq_set(void) { acpi_noirq = 1; }
+static inline void acpi_disable_pci(void)
+{
+	acpi_pci_disabled = 1;
+	acpi_noirq_set();
+}
+extern int acpi_irq_balance_set(char *str);
+
+/* routines for saving/restoring kernel state */
+extern int acpi_save_state_mem(void);
+extern void acpi_restore_state_mem(void);
+
+extern unsigned long acpi_wakeup_address;
+
+/* early initialization routine */
+extern void acpi_reserve_bootmem(void);
+
+/*
+ * Check if the CPU can handle C2 and deeper
+ */
+static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
+{
+	/*
+	 * Early models (<=5) of AMD Opterons are not supposed to go into
+	 * C2 state.
+	 *
+	 * Steppings 0x0A and later are good
+	 */
+	if (boot_cpu_data.x86 == 0x0F &&
+	    boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+	    boot_cpu_data.x86_model <= 0x05 &&
+	    boot_cpu_data.x86_mask < 0x0A)
+		return 1;
+	else if (boot_cpu_has(X86_FEATURE_AMDC1E))
+		return 1;
+	else
+		return max_cstate;
+}
+
+#else /* !CONFIG_ACPI */
+
+#define acpi_lapic 0
+#define acpi_ioapic 0
+static inline void acpi_noirq_set(void) { }
+static inline void acpi_disable_pci(void) { }
+static inline void disable_acpi(void) { }
+
+#endif /* !CONFIG_ACPI */
+
+#define ARCH_HAS_POWER_INIT	1
+
+struct bootnode;
+
+#ifdef CONFIG_ACPI_NUMA
+extern int acpi_numa;
+extern int acpi_scan_nodes(unsigned long start, unsigned long end);
+#define NR_NODE_MEMBLKS (MAX_NUMNODES*2)
+extern void acpi_fake_nodes(const struct bootnode *fake_nodes,
+				   int num_nodes);
+#else
+static inline void acpi_fake_nodes(const struct bootnode *fake_nodes,
+				   int num_nodes)
+{
+}
+#endif
+
+#define acpi_unlazy_tlb(x)	leave_mm(x)
+
+#endif /* _ASM_X86_ACPI_H */
diff --git a/arch/x86/include/asm/agp.h b/arch/x86/include/asm/agp.h
new file mode 100644
index 0000000..9825cd6
--- /dev/null
+++ b/arch/x86/include/asm/agp.h
@@ -0,0 +1,35 @@
+#ifndef _ASM_X86_AGP_H
+#define _ASM_X86_AGP_H
+
+#include <asm/pgtable.h>
+#include <asm/cacheflush.h>
+
+/*
+ * Functions to keep the agpgart mappings coherent with the MMU. The
+ * GART gives the CPU a physical alias of pages in memory. The alias
+ * region is mapped uncacheable. Make sure there are no conflicting
+ * mappings with different cachability attributes for the same
+ * page. This avoids data corruption on some CPUs.
+ */
+
+#define map_page_into_agp(page) set_pages_uc(page, 1)
+#define unmap_page_from_agp(page) set_pages_wb(page, 1)
+
+/*
+ * Could use CLFLUSH here if the cpu supports it. But then it would
+ * need to be called for each cacheline of the whole page so it may
+ * not be worth it. Would need a page for it.
+ */
+#define flush_agp_cache() wbinvd()
+
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order)		\
+	((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order)	\
+	free_pages((unsigned long)(table), (order))
+
+#endif /* _ASM_X86_AGP_H */
diff --git a/include/asm-x86/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h
similarity index 100%
rename from include/asm-x86/alternative-asm.h
rename to arch/x86/include/asm/alternative-asm.h
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
new file mode 100644
index 0000000..f6aa18e
--- /dev/null
+++ b/arch/x86/include/asm/alternative.h
@@ -0,0 +1,183 @@
+#ifndef _ASM_X86_ALTERNATIVE_H
+#define _ASM_X86_ALTERNATIVE_H
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <asm/asm.h>
+
+/*
+ * Alternative inline assembly for SMP.
+ *
+ * The LOCK_PREFIX macro defined here replaces the LOCK and
+ * LOCK_PREFIX macros used everywhere in the source tree.
+ *
+ * SMP alternatives use the same data structures as the other
+ * alternatives and the X86_FEATURE_UP flag to indicate the case of a
+ * UP system running a SMP kernel.  The existing apply_alternatives()
+ * works fine for patching a SMP kernel for UP.
+ *
+ * The SMP alternative tables can be kept after boot and contain both
+ * UP and SMP versions of the instructions to allow switching back to
+ * SMP at runtime, when hotplugging in a new CPU, which is especially
+ * useful in virtualized environments.
+ *
+ * The very common lock prefix is handled as special case in a
+ * separate table which is a pure address list without replacement ptr
+ * and size information.  That keeps the table sizes small.
+ */
+
+#ifdef CONFIG_SMP
+#define LOCK_PREFIX \
+		".section .smp_locks,\"a\"\n"	\
+		_ASM_ALIGN "\n"			\
+		_ASM_PTR "661f\n" /* address */	\
+		".previous\n"			\
+		"661:\n\tlock; "
+
+#else /* ! CONFIG_SMP */
+#define LOCK_PREFIX ""
+#endif
+
+/* This must be included *after* the definition of LOCK_PREFIX */
+#include <asm/cpufeature.h>
+
+struct alt_instr {
+	u8 *instr;		/* original instruction */
+	u8 *replacement;
+	u8  cpuid;		/* cpuid bit set for replacement */
+	u8  instrlen;		/* length of original instruction */
+	u8  replacementlen;	/* length of new instruction, <= instrlen */
+	u8  pad1;
+#ifdef CONFIG_X86_64
+	u32 pad2;
+#endif
+};
+
+extern void alternative_instructions(void);
+extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
+
+struct module;
+
+#ifdef CONFIG_SMP
+extern void alternatives_smp_module_add(struct module *mod, char *name,
+					void *locks, void *locks_end,
+					void *text, void *text_end);
+extern void alternatives_smp_module_del(struct module *mod);
+extern void alternatives_smp_switch(int smp);
+#else
+static inline void alternatives_smp_module_add(struct module *mod, char *name,
+					       void *locks, void *locks_end,
+					       void *text, void *text_end) {}
+static inline void alternatives_smp_module_del(struct module *mod) {}
+static inline void alternatives_smp_switch(int smp) {}
+#endif	/* CONFIG_SMP */
+
+const unsigned char *const *find_nop_table(void);
+
+/*
+ * Alternative instructions for different CPU types or capabilities.
+ *
+ * This allows to use optimized instructions even on generic binary
+ * kernels.
+ *
+ * length of oldinstr must be longer or equal the length of newinstr
+ * It can be padded with nops as needed.
+ *
+ * For non barrier like inlines please define new variants
+ * without volatile and memory clobber.
+ */
+#define alternative(oldinstr, newinstr, feature)			\
+	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
+		      ".section .altinstructions,\"a\"\n"		\
+		      _ASM_ALIGN "\n"					\
+		      _ASM_PTR "661b\n"		/* label */		\
+		      _ASM_PTR "663f\n"		/* new instruction */	\
+		      "	 .byte %c0\n"		/* feature bit */	\
+		      "	 .byte 662b-661b\n"	/* sourcelen */		\
+		      "	 .byte 664f-663f\n"	/* replacementlen */	\
+		      ".previous\n"					\
+		      ".section .altinstr_replacement,\"ax\"\n"		\
+		      "663:\n\t" newinstr "\n664:\n"  /* replacement */	\
+		      ".previous" :: "i" (feature) : "memory")
+
+/*
+ * Alternative inline assembly with input.
+ *
+ * Pecularities:
+ * No memory clobber here.
+ * Argument numbers start with 1.
+ * Best is to use constraints that are fixed size (like (%1) ... "r")
+ * If you use variable sized constraints like "m" or "g" in the
+ * replacement make sure to pad to the worst case length.
+ */
+#define alternative_input(oldinstr, newinstr, feature, input...)	\
+	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
+		      ".section .altinstructions,\"a\"\n"		\
+		      _ASM_ALIGN "\n"					\
+		      _ASM_PTR "661b\n"		/* label */		\
+		      _ASM_PTR "663f\n"		/* new instruction */	\
+		      "	 .byte %c0\n"		/* feature bit */	\
+		      "	 .byte 662b-661b\n"	/* sourcelen */		\
+		      "	 .byte 664f-663f\n"	/* replacementlen */	\
+		      ".previous\n"					\
+		      ".section .altinstr_replacement,\"ax\"\n"		\
+		      "663:\n\t" newinstr "\n664:\n"  /* replacement */	\
+		      ".previous" :: "i" (feature), ##input)
+
+/* Like alternative_input, but with a single output argument */
+#define alternative_io(oldinstr, newinstr, feature, output, input...)	\
+	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
+		      ".section .altinstructions,\"a\"\n"		\
+		      _ASM_ALIGN "\n"					\
+		      _ASM_PTR "661b\n"		/* label */		\
+		      _ASM_PTR "663f\n"		/* new instruction */	\
+		      "	 .byte %c[feat]\n"	/* feature bit */	\
+		      "	 .byte 662b-661b\n"	/* sourcelen */		\
+		      "	 .byte 664f-663f\n"	/* replacementlen */	\
+		      ".previous\n"					\
+		      ".section .altinstr_replacement,\"ax\"\n"		\
+		      "663:\n\t" newinstr "\n664:\n"  /* replacement */ \
+		      ".previous" : output : [feat] "i" (feature), ##input)
+
+/*
+ * use this macro(s) if you need more than one output parameter
+ * in alternative_io
+ */
+#define ASM_OUTPUT2(a, b) a, b
+
+struct paravirt_patch_site;
+#ifdef CONFIG_PARAVIRT
+void apply_paravirt(struct paravirt_patch_site *start,
+		    struct paravirt_patch_site *end);
+#else
+static inline void apply_paravirt(struct paravirt_patch_site *start,
+				  struct paravirt_patch_site *end)
+{}
+#define __parainstructions	NULL
+#define __parainstructions_end	NULL
+#endif
+
+extern void add_nops(void *insns, unsigned int len);
+
+/*
+ * Clear and restore the kernel write-protection flag on the local CPU.
+ * Allows the kernel to edit read-only pages.
+ * Side-effect: any interrupt handler running between save and restore will have
+ * the ability to write to read-only pages.
+ *
+ * Warning:
+ * Code patching in the UP case is safe if NMIs and MCE handlers are stopped and
+ * no thread can be preempted in the instructions being modified (no iret to an
+ * invalid instruction possible) or if the instructions are changed from a
+ * consistent state to another consistent state atomically.
+ * More care must be taken when modifying code in the SMP case because of
+ * Intel's errata.
+ * On the local CPU you need to be protected again NMI or MCE handlers seeing an
+ * inconsistent instruction while you patch.
+ * The _early version expects the memory to already be RW.
+ */
+
+extern void *text_poke(void *addr, const void *opcode, size_t len);
+extern void *text_poke_early(void *addr, const void *opcode, size_t len);
+
+#endif /* _ASM_X86_ALTERNATIVE_H */
diff --git a/arch/x86/include/asm/amd_iommu.h b/arch/x86/include/asm/amd_iommu.h
new file mode 100644
index 0000000..f712344
--- /dev/null
+++ b/arch/x86/include/asm/amd_iommu.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Author: Joerg Roedel <joerg.roedel@amd.com>
+ *         Leo Duran <leo.duran@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_X86_AMD_IOMMU_H
+#define _ASM_X86_AMD_IOMMU_H
+
+#include <linux/irqreturn.h>
+
+#ifdef CONFIG_AMD_IOMMU
+extern int amd_iommu_init(void);
+extern int amd_iommu_init_dma_ops(void);
+extern void amd_iommu_detect(void);
+extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
+#else
+static inline int amd_iommu_init(void) { return -ENODEV; }
+static inline void amd_iommu_detect(void) { }
+#endif
+
+#endif /* _ASM_X86_AMD_IOMMU_H */
diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
new file mode 100644
index 0000000..1a30c04
--- /dev/null
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -0,0 +1,404 @@
+/*
+ * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Author: Joerg Roedel <joerg.roedel@amd.com>
+ *         Leo Duran <leo.duran@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_X86_AMD_IOMMU_TYPES_H
+#define _ASM_X86_AMD_IOMMU_TYPES_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+/*
+ * some size calculation constants
+ */
+#define DEV_TABLE_ENTRY_SIZE		32
+#define ALIAS_TABLE_ENTRY_SIZE		2
+#define RLOOKUP_TABLE_ENTRY_SIZE	(sizeof(void *))
+
+/* Length of the MMIO region for the AMD IOMMU */
+#define MMIO_REGION_LENGTH       0x4000
+
+/* Capability offsets used by the driver */
+#define MMIO_CAP_HDR_OFFSET	0x00
+#define MMIO_RANGE_OFFSET	0x0c
+#define MMIO_MISC_OFFSET	0x10
+
+/* Masks, shifts and macros to parse the device range capability */
+#define MMIO_RANGE_LD_MASK	0xff000000
+#define MMIO_RANGE_FD_MASK	0x00ff0000
+#define MMIO_RANGE_BUS_MASK	0x0000ff00
+#define MMIO_RANGE_LD_SHIFT	24
+#define MMIO_RANGE_FD_SHIFT	16
+#define MMIO_RANGE_BUS_SHIFT	8
+#define MMIO_GET_LD(x)  (((x) & MMIO_RANGE_LD_MASK) >> MMIO_RANGE_LD_SHIFT)
+#define MMIO_GET_FD(x)  (((x) & MMIO_RANGE_FD_MASK) >> MMIO_RANGE_FD_SHIFT)
+#define MMIO_GET_BUS(x) (((x) & MMIO_RANGE_BUS_MASK) >> MMIO_RANGE_BUS_SHIFT)
+#define MMIO_MSI_NUM(x)	((x) & 0x1f)
+
+/* Flag masks for the AMD IOMMU exclusion range */
+#define MMIO_EXCL_ENABLE_MASK 0x01ULL
+#define MMIO_EXCL_ALLOW_MASK  0x02ULL
+
+/* Used offsets into the MMIO space */
+#define MMIO_DEV_TABLE_OFFSET   0x0000
+#define MMIO_CMD_BUF_OFFSET     0x0008
+#define MMIO_EVT_BUF_OFFSET     0x0010
+#define MMIO_CONTROL_OFFSET     0x0018
+#define MMIO_EXCL_BASE_OFFSET   0x0020
+#define MMIO_EXCL_LIMIT_OFFSET  0x0028
+#define MMIO_CMD_HEAD_OFFSET	0x2000
+#define MMIO_CMD_TAIL_OFFSET	0x2008
+#define MMIO_EVT_HEAD_OFFSET	0x2010
+#define MMIO_EVT_TAIL_OFFSET	0x2018
+#define MMIO_STATUS_OFFSET	0x2020
+
+/* MMIO status bits */
+#define MMIO_STATUS_COM_WAIT_INT_MASK	0x04
+
+/* event logging constants */
+#define EVENT_ENTRY_SIZE	0x10
+#define EVENT_TYPE_SHIFT	28
+#define EVENT_TYPE_MASK		0xf
+#define EVENT_TYPE_ILL_DEV	0x1
+#define EVENT_TYPE_IO_FAULT	0x2
+#define EVENT_TYPE_DEV_TAB_ERR	0x3
+#define EVENT_TYPE_PAGE_TAB_ERR	0x4
+#define EVENT_TYPE_ILL_CMD	0x5
+#define EVENT_TYPE_CMD_HARD_ERR	0x6
+#define EVENT_TYPE_IOTLB_INV_TO	0x7
+#define EVENT_TYPE_INV_DEV_REQ	0x8
+#define EVENT_DEVID_MASK	0xffff
+#define EVENT_DEVID_SHIFT	0
+#define EVENT_DOMID_MASK	0xffff
+#define EVENT_DOMID_SHIFT	0
+#define EVENT_FLAGS_MASK	0xfff
+#define EVENT_FLAGS_SHIFT	0x10
+
+/* feature control bits */
+#define CONTROL_IOMMU_EN        0x00ULL
+#define CONTROL_HT_TUN_EN       0x01ULL
+#define CONTROL_EVT_LOG_EN      0x02ULL
+#define CONTROL_EVT_INT_EN      0x03ULL
+#define CONTROL_COMWAIT_EN      0x04ULL
+#define CONTROL_PASSPW_EN       0x08ULL
+#define CONTROL_RESPASSPW_EN    0x09ULL
+#define CONTROL_COHERENT_EN     0x0aULL
+#define CONTROL_ISOC_EN         0x0bULL
+#define CONTROL_CMDBUF_EN       0x0cULL
+#define CONTROL_PPFLOG_EN       0x0dULL
+#define CONTROL_PPFINT_EN       0x0eULL
+
+/* command specific defines */
+#define CMD_COMPL_WAIT          0x01
+#define CMD_INV_DEV_ENTRY       0x02
+#define CMD_INV_IOMMU_PAGES     0x03
+
+#define CMD_COMPL_WAIT_STORE_MASK	0x01
+#define CMD_COMPL_WAIT_INT_MASK		0x02
+#define CMD_INV_IOMMU_PAGES_SIZE_MASK	0x01
+#define CMD_INV_IOMMU_PAGES_PDE_MASK	0x02
+
+#define CMD_INV_IOMMU_ALL_PAGES_ADDRESS	0x7fffffffffffffffULL
+
+/* macros and definitions for device table entries */
+#define DEV_ENTRY_VALID         0x00
+#define DEV_ENTRY_TRANSLATION   0x01
+#define DEV_ENTRY_IR            0x3d
+#define DEV_ENTRY_IW            0x3e
+#define DEV_ENTRY_NO_PAGE_FAULT	0x62
+#define DEV_ENTRY_EX            0x67
+#define DEV_ENTRY_SYSMGT1       0x68
+#define DEV_ENTRY_SYSMGT2       0x69
+#define DEV_ENTRY_INIT_PASS     0xb8
+#define DEV_ENTRY_EINT_PASS     0xb9
+#define DEV_ENTRY_NMI_PASS      0xba
+#define DEV_ENTRY_LINT0_PASS    0xbe
+#define DEV_ENTRY_LINT1_PASS    0xbf
+#define DEV_ENTRY_MODE_MASK	0x07
+#define DEV_ENTRY_MODE_SHIFT	0x09
+
+/* constants to configure the command buffer */
+#define CMD_BUFFER_SIZE    8192
+#define CMD_BUFFER_ENTRIES 512
+#define MMIO_CMD_SIZE_SHIFT 56
+#define MMIO_CMD_SIZE_512 (0x9ULL << MMIO_CMD_SIZE_SHIFT)
+
+/* constants for event buffer handling */
+#define EVT_BUFFER_SIZE		8192 /* 512 entries */
+#define EVT_LEN_MASK		(0x9ULL << 56)
+
+#define PAGE_MODE_1_LEVEL 0x01
+#define PAGE_MODE_2_LEVEL 0x02
+#define PAGE_MODE_3_LEVEL 0x03
+
+#define IOMMU_PDE_NL_0   0x000ULL
+#define IOMMU_PDE_NL_1   0x200ULL
+#define IOMMU_PDE_NL_2   0x400ULL
+#define IOMMU_PDE_NL_3   0x600ULL
+
+#define IOMMU_PTE_L2_INDEX(address) (((address) >> 30) & 0x1ffULL)
+#define IOMMU_PTE_L1_INDEX(address) (((address) >> 21) & 0x1ffULL)
+#define IOMMU_PTE_L0_INDEX(address) (((address) >> 12) & 0x1ffULL)
+
+#define IOMMU_MAP_SIZE_L1 (1ULL << 21)
+#define IOMMU_MAP_SIZE_L2 (1ULL << 30)
+#define IOMMU_MAP_SIZE_L3 (1ULL << 39)
+
+#define IOMMU_PTE_P  (1ULL << 0)
+#define IOMMU_PTE_TV (1ULL << 1)
+#define IOMMU_PTE_U  (1ULL << 59)
+#define IOMMU_PTE_FC (1ULL << 60)
+#define IOMMU_PTE_IR (1ULL << 61)
+#define IOMMU_PTE_IW (1ULL << 62)
+
+#define IOMMU_L1_PDE(address) \
+	((address) | IOMMU_PDE_NL_1 | IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
+#define IOMMU_L2_PDE(address) \
+	((address) | IOMMU_PDE_NL_2 | IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
+
+#define IOMMU_PAGE_MASK (((1ULL << 52) - 1) & ~0xfffULL)
+#define IOMMU_PTE_PRESENT(pte) ((pte) & IOMMU_PTE_P)
+#define IOMMU_PTE_PAGE(pte) (phys_to_virt((pte) & IOMMU_PAGE_MASK))
+#define IOMMU_PTE_MODE(pte) (((pte) >> 9) & 0x07)
+
+#define IOMMU_PROT_MASK 0x03
+#define IOMMU_PROT_IR 0x01
+#define IOMMU_PROT_IW 0x02
+
+/* IOMMU capabilities */
+#define IOMMU_CAP_IOTLB   24
+#define IOMMU_CAP_NPCACHE 26
+
+#define MAX_DOMAIN_ID 65536
+
+/* FIXME: move this macro to <linux/pci.h> */
+#define PCI_BUS(x) (((x) >> 8) & 0xff)
+
+/*
+ * This structure contains generic data for  IOMMU protection domains
+ * independent of their use.
+ */
+struct protection_domain {
+	spinlock_t lock; /* mostly used to lock the page table*/
+	u16 id;		 /* the domain id written to the device table */
+	int mode;	 /* paging mode (0-6 levels) */
+	u64 *pt_root;	 /* page table root pointer */
+	void *priv;	 /* private data */
+};
+
+/*
+ * Data container for a dma_ops specific protection domain
+ */
+struct dma_ops_domain {
+	struct list_head list;
+
+	/* generic protection domain information */
+	struct protection_domain domain;
+
+	/* size of the aperture for the mappings */
+	unsigned long aperture_size;
+
+	/* address we start to search for free addresses */
+	unsigned long next_bit;
+
+	/* address allocation bitmap */
+	unsigned long *bitmap;
+
+	/*
+	 * Array of PTE pages for the aperture. In this array we save all the
+	 * leaf pages of the domain page table used for the aperture. This way
+	 * we don't need to walk the page table to find a specific PTE. We can
+	 * just calculate its address in constant time.
+	 */
+	u64 **pte_pages;
+
+	/* This will be set to true when TLB needs to be flushed */
+	bool need_flush;
+
+	/*
+	 * if this is a preallocated domain, keep the device for which it was
+	 * preallocated in this variable
+	 */
+	u16 target_dev;
+};
+
+/*
+ * Structure where we save information about one hardware AMD IOMMU in the
+ * system.
+ */
+struct amd_iommu {
+	struct list_head list;
+
+	/* locks the accesses to the hardware */
+	spinlock_t lock;
+
+	/* Pointer to PCI device of this IOMMU */
+	struct pci_dev *dev;
+
+	/*
+	 * Capability pointer. There could be more than one IOMMU per PCI
+	 * device function if there are more than one AMD IOMMU capability
+	 * pointers.
+	 */
+	u16 cap_ptr;
+
+	/* physical address of MMIO space */
+	u64 mmio_phys;
+	/* virtual address of MMIO space */
+	u8 *mmio_base;
+
+	/* capabilities of that IOMMU read from ACPI */
+	u32 cap;
+
+	/* pci domain of this IOMMU */
+	u16 pci_seg;
+
+	/* first device this IOMMU handles. read from PCI */
+	u16 first_device;
+	/* last device this IOMMU handles. read from PCI */
+	u16 last_device;
+
+	/* start of exclusion range of that IOMMU */
+	u64 exclusion_start;
+	/* length of exclusion range of that IOMMU */
+	u64 exclusion_length;
+
+	/* command buffer virtual address */
+	u8 *cmd_buf;
+	/* size of command buffer */
+	u32 cmd_buf_size;
+
+	/* event buffer virtual address */
+	u8 *evt_buf;
+	/* size of event buffer */
+	u32 evt_buf_size;
+	/* MSI number for event interrupt */
+	u16 evt_msi_num;
+
+	/* if one, we need to send a completion wait command */
+	int need_sync;
+
+	/* true if interrupts for this IOMMU are already enabled */
+	bool int_enabled;
+
+	/* default dma_ops domain for that IOMMU */
+	struct dma_ops_domain *default_dom;
+};
+
+/*
+ * List with all IOMMUs in the system. This list is not locked because it is
+ * only written and read at driver initialization or suspend time
+ */
+extern struct list_head amd_iommu_list;
+
+/*
+ * Structure defining one entry in the device table
+ */
+struct dev_table_entry {
+	u32 data[8];
+};
+
+/*
+ * One entry for unity mappings parsed out of the ACPI table.
+ */
+struct unity_map_entry {
+	struct list_head list;
+
+	/* starting device id this entry is used for (including) */
+	u16 devid_start;
+	/* end device id this entry is used for (including) */
+	u16 devid_end;
+
+	/* start address to unity map (including) */
+	u64 address_start;
+	/* end address to unity map (including) */
+	u64 address_end;
+
+	/* required protection */
+	int prot;
+};
+
+/*
+ * List of all unity mappings. It is not locked because as runtime it is only
+ * read. It is created at ACPI table parsing time.
+ */
+extern struct list_head amd_iommu_unity_map;
+
+/*
+ * Data structures for device handling
+ */
+
+/*
+ * Device table used by hardware. Read and write accesses by software are
+ * locked with the amd_iommu_pd_table lock.
+ */
+extern struct dev_table_entry *amd_iommu_dev_table;
+
+/*
+ * Alias table to find requestor ids to device ids. Not locked because only
+ * read on runtime.
+ */
+extern u16 *amd_iommu_alias_table;
+
+/*
+ * Reverse lookup table to find the IOMMU which translates a specific device.
+ */
+extern struct amd_iommu **amd_iommu_rlookup_table;
+
+/* size of the dma_ops aperture as power of 2 */
+extern unsigned amd_iommu_aperture_order;
+
+/* largest PCI device id we expect translation requests for */
+extern u16 amd_iommu_last_bdf;
+
+/* data structures for protection domain handling */
+extern struct protection_domain **amd_iommu_pd_table;
+
+/* allocation bitmap for domain ids */
+extern unsigned long *amd_iommu_pd_alloc_bitmap;
+
+/* will be 1 if device isolation is enabled */
+extern int amd_iommu_isolate;
+
+/*
+ * If true, the addresses will be flushed on unmap time, not when
+ * they are reused
+ */
+extern bool amd_iommu_unmap_flush;
+
+/* takes a PCI device id and prints it out in a readable form */
+static inline void print_devid(u16 devid, int nl)
+{
+	int bus = devid >> 8;
+	int dev = devid >> 3 & 0x1f;
+	int fn  = devid & 0x07;
+
+	printk("%02x:%02x.%x", bus, dev, fn);
+	if (nl)
+		printk("\n");
+}
+
+/* takes bus and device/function and returns the device id
+ * FIXME: should that be in generic PCI code? */
+static inline u16 calc_devid(u8 bus, u8 devfn)
+{
+	return (((u16)bus) << 8) | devfn;
+}
+
+#endif /* _ASM_X86_AMD_IOMMU_TYPES_H */
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
new file mode 100644
index 0000000..3b1510b
--- /dev/null
+++ b/arch/x86/include/asm/apic.h
@@ -0,0 +1,199 @@
+#ifndef _ASM_X86_APIC_H
+#define _ASM_X86_APIC_H
+
+#include <linux/pm.h>
+#include <linux/delay.h>
+
+#include <asm/alternative.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/cpufeature.h>
+#include <asm/msr.h>
+
+#define ARCH_APICTIMER_STOPS_ON_C3	1
+
+/*
+ * Debugging macros
+ */
+#define APIC_QUIET   0
+#define APIC_VERBOSE 1
+#define APIC_DEBUG   2
+
+/*
+ * Define the default level of output to be very little
+ * This can be turned up by using apic=verbose for more
+ * information and apic=debug for _lots_ of information.
+ * apic_verbosity is defined in apic.c
+ */
+#define apic_printk(v, s, a...) do {       \
+		if ((v) <= apic_verbosity) \
+			printk(s, ##a);    \
+	} while (0)
+
+
+extern void generic_apic_probe(void);
+
+#ifdef CONFIG_X86_LOCAL_APIC
+
+extern unsigned int apic_verbosity;
+extern int local_apic_timer_c2_ok;
+
+extern int disable_apic;
+/*
+ * Basic functions accessing APICs.
+ */
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define setup_boot_clock setup_boot_APIC_clock
+#define setup_secondary_clock setup_secondary_APIC_clock
+#endif
+
+extern int is_vsmp_box(void);
+extern void xapic_wait_icr_idle(void);
+extern u32 safe_xapic_wait_icr_idle(void);
+extern u64 xapic_icr_read(void);
+extern void xapic_icr_write(u32, u32);
+extern int setup_profiling_timer(unsigned int);
+
+static inline void native_apic_mem_write(u32 reg, u32 v)
+{
+	volatile u32 *addr = (volatile u32 *)(APIC_BASE + reg);
+
+	alternative_io("movl %0, %1", "xchgl %0, %1", X86_FEATURE_11AP,
+		       ASM_OUTPUT2("=r" (v), "=m" (*addr)),
+		       ASM_OUTPUT2("0" (v), "m" (*addr)));
+}
+
+static inline u32 native_apic_mem_read(u32 reg)
+{
+	return *((volatile u32 *)(APIC_BASE + reg));
+}
+
+static inline void native_apic_msr_write(u32 reg, u32 v)
+{
+	if (reg == APIC_DFR || reg == APIC_ID || reg == APIC_LDR ||
+	    reg == APIC_LVR)
+		return;
+
+	wrmsr(APIC_BASE_MSR + (reg >> 4), v, 0);
+}
+
+static inline u32 native_apic_msr_read(u32 reg)
+{
+	u32 low, high;
+
+	if (reg == APIC_DFR)
+		return -1;
+
+	rdmsr(APIC_BASE_MSR + (reg >> 4), low, high);
+	return low;
+}
+
+#ifndef CONFIG_X86_32
+extern int x2apic, x2apic_preenabled;
+extern void check_x2apic(void);
+extern void enable_x2apic(void);
+extern void enable_IR_x2apic(void);
+extern void x2apic_icr_write(u32 low, u32 id);
+static inline int x2apic_enabled(void)
+{
+	int msr, msr2;
+
+	if (!cpu_has_x2apic)
+		return 0;
+
+	rdmsr(MSR_IA32_APICBASE, msr, msr2);
+	if (msr & X2APIC_ENABLE)
+		return 1;
+	return 0;
+}
+#else
+#define x2apic_enabled()	0
+#endif
+
+struct apic_ops {
+	u32 (*read)(u32 reg);
+	void (*write)(u32 reg, u32 v);
+	u64 (*icr_read)(void);
+	void (*icr_write)(u32 low, u32 high);
+	void (*wait_icr_idle)(void);
+	u32 (*safe_wait_icr_idle)(void);
+};
+
+extern struct apic_ops *apic_ops;
+
+#define apic_read (apic_ops->read)
+#define apic_write (apic_ops->write)
+#define apic_icr_read (apic_ops->icr_read)
+#define apic_icr_write (apic_ops->icr_write)
+#define apic_wait_icr_idle (apic_ops->wait_icr_idle)
+#define safe_apic_wait_icr_idle (apic_ops->safe_wait_icr_idle)
+
+extern int get_physical_broadcast(void);
+
+#ifdef CONFIG_X86_64
+static inline void ack_x2APIC_irq(void)
+{
+	/* Docs say use 0 for future compatibility */
+	native_apic_msr_write(APIC_EOI, 0);
+}
+#endif
+
+
+static inline void ack_APIC_irq(void)
+{
+	/*
+	 * ack_APIC_irq() actually gets compiled as a single instruction
+	 * ... yummie.
+	 */
+
+	/* Docs say use 0 for future compatibility */
+	apic_write(APIC_EOI, 0);
+}
+
+extern int lapic_get_maxlvt(void);
+extern void clear_local_APIC(void);
+extern void connect_bsp_APIC(void);
+extern void disconnect_bsp_APIC(int virt_wire_setup);
+extern void disable_local_APIC(void);
+extern void lapic_shutdown(void);
+extern int verify_local_APIC(void);
+extern void cache_APIC_registers(void);
+extern void sync_Arb_IDs(void);
+extern void init_bsp_APIC(void);
+extern void setup_local_APIC(void);
+extern void end_local_APIC_setup(void);
+extern void init_apic_mappings(void);
+extern void setup_boot_APIC_clock(void);
+extern void setup_secondary_APIC_clock(void);
+extern int APIC_init_uniprocessor(void);
+extern void enable_NMI_through_LVT0(void);
+
+/*
+ * On 32bit this is mach-xxx local
+ */
+#ifdef CONFIG_X86_64
+extern void early_init_lapic_mapping(void);
+extern int apic_is_clustered_box(void);
+#else
+static inline int apic_is_clustered_box(void)
+{
+	return 0;
+}
+#endif
+
+extern u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask);
+extern u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask);
+
+
+#else /* !CONFIG_X86_LOCAL_APIC */
+static inline void lapic_shutdown(void) { }
+#define local_apic_timer_c2_ok		1
+static inline void init_apic_mappings(void) { }
+
+#endif /* !CONFIG_X86_LOCAL_APIC */
+
+#endif /* _ASM_X86_APIC_H */
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
new file mode 100644
index 0000000..63134e3
--- /dev/null
+++ b/arch/x86/include/asm/apicdef.h
@@ -0,0 +1,417 @@
+#ifndef _ASM_X86_APICDEF_H
+#define _ASM_X86_APICDEF_H
+
+/*
+ * Constants for various Intel APICs. (local APIC, IOAPIC, etc.)
+ *
+ * Alan Cox <Alan.Cox@linux.org>, 1995.
+ * Ingo Molnar <mingo@redhat.com>, 1999, 2000
+ */
+
+#define	APIC_DEFAULT_PHYS_BASE	0xfee00000
+
+#define	APIC_ID		0x20
+
+#define	APIC_LVR	0x30
+#define		APIC_LVR_MASK		0xFF00FF
+#define		GET_APIC_VERSION(x)	((x) & 0xFFu)
+#define		GET_APIC_MAXLVT(x)	(((x) >> 16) & 0xFFu)
+#ifdef CONFIG_X86_32
+#  define	APIC_INTEGRATED(x)	((x) & 0xF0u)
+#else
+#  define	APIC_INTEGRATED(x)	(1)
+#endif
+#define		APIC_XAPIC(x)		((x) >= 0x14)
+#define	APIC_TASKPRI	0x80
+#define		APIC_TPRI_MASK		0xFFu
+#define	APIC_ARBPRI	0x90
+#define		APIC_ARBPRI_MASK	0xFFu
+#define	APIC_PROCPRI	0xA0
+#define	APIC_EOI	0xB0
+#define		APIC_EIO_ACK		0x0
+#define	APIC_RRR	0xC0
+#define	APIC_LDR	0xD0
+#define		APIC_LDR_MASK		(0xFFu << 24)
+#define		GET_APIC_LOGICAL_ID(x)	(((x) >> 24) & 0xFFu)
+#define		SET_APIC_LOGICAL_ID(x)	(((x) << 24))
+#define		APIC_ALL_CPUS		0xFFu
+#define	APIC_DFR	0xE0
+#define		APIC_DFR_CLUSTER		0x0FFFFFFFul
+#define		APIC_DFR_FLAT			0xFFFFFFFFul
+#define	APIC_SPIV	0xF0
+#define		APIC_SPIV_FOCUS_DISABLED	(1 << 9)
+#define		APIC_SPIV_APIC_ENABLED		(1 << 8)
+#define	APIC_ISR	0x100
+#define	APIC_ISR_NR     0x8     /* Number of 32 bit ISR registers. */
+#define	APIC_TMR	0x180
+#define	APIC_IRR	0x200
+#define	APIC_ESR	0x280
+#define		APIC_ESR_SEND_CS	0x00001
+#define		APIC_ESR_RECV_CS	0x00002
+#define		APIC_ESR_SEND_ACC	0x00004
+#define		APIC_ESR_RECV_ACC	0x00008
+#define		APIC_ESR_SENDILL	0x00020
+#define		APIC_ESR_RECVILL	0x00040
+#define		APIC_ESR_ILLREGA	0x00080
+#define	APIC_ICR	0x300
+#define		APIC_DEST_SELF		0x40000
+#define		APIC_DEST_ALLINC	0x80000
+#define		APIC_DEST_ALLBUT	0xC0000
+#define		APIC_ICR_RR_MASK	0x30000
+#define		APIC_ICR_RR_INVALID	0x00000
+#define		APIC_ICR_RR_INPROG	0x10000
+#define		APIC_ICR_RR_VALID	0x20000
+#define		APIC_INT_LEVELTRIG	0x08000
+#define		APIC_INT_ASSERT		0x04000
+#define		APIC_ICR_BUSY		0x01000
+#define		APIC_DEST_LOGICAL	0x00800
+#define		APIC_DEST_PHYSICAL	0x00000
+#define		APIC_DM_FIXED		0x00000
+#define		APIC_DM_LOWEST		0x00100
+#define		APIC_DM_SMI		0x00200
+#define		APIC_DM_REMRD		0x00300
+#define		APIC_DM_NMI		0x00400
+#define		APIC_DM_INIT		0x00500
+#define		APIC_DM_STARTUP		0x00600
+#define		APIC_DM_EXTINT		0x00700
+#define		APIC_VECTOR_MASK	0x000FF
+#define	APIC_ICR2	0x310
+#define		GET_APIC_DEST_FIELD(x)	(((x) >> 24) & 0xFF)
+#define		SET_APIC_DEST_FIELD(x)	((x) << 24)
+#define	APIC_LVTT	0x320
+#define	APIC_LVTTHMR	0x330
+#define	APIC_LVTPC	0x340
+#define	APIC_LVT0	0x350
+#define		APIC_LVT_TIMER_BASE_MASK	(0x3 << 18)
+#define		GET_APIC_TIMER_BASE(x)		(((x) >> 18) & 0x3)
+#define		SET_APIC_TIMER_BASE(x)		(((x) << 18))
+#define		APIC_TIMER_BASE_CLKIN		0x0
+#define		APIC_TIMER_BASE_TMBASE		0x1
+#define		APIC_TIMER_BASE_DIV		0x2
+#define		APIC_LVT_TIMER_PERIODIC		(1 << 17)
+#define		APIC_LVT_MASKED			(1 << 16)
+#define		APIC_LVT_LEVEL_TRIGGER		(1 << 15)
+#define		APIC_LVT_REMOTE_IRR		(1 << 14)
+#define		APIC_INPUT_POLARITY		(1 << 13)
+#define		APIC_SEND_PENDING		(1 << 12)
+#define		APIC_MODE_MASK			0x700
+#define		GET_APIC_DELIVERY_MODE(x)	(((x) >> 8) & 0x7)
+#define		SET_APIC_DELIVERY_MODE(x, y)	(((x) & ~0x700) | ((y) << 8))
+#define			APIC_MODE_FIXED		0x0
+#define			APIC_MODE_NMI		0x4
+#define			APIC_MODE_EXTINT	0x7
+#define	APIC_LVT1	0x360
+#define	APIC_LVTERR	0x370
+#define	APIC_TMICT	0x380
+#define	APIC_TMCCT	0x390
+#define	APIC_TDCR	0x3E0
+#define APIC_SELF_IPI	0x3F0
+#define		APIC_TDR_DIV_TMBASE	(1 << 2)
+#define		APIC_TDR_DIV_1		0xB
+#define		APIC_TDR_DIV_2		0x0
+#define		APIC_TDR_DIV_4		0x1
+#define		APIC_TDR_DIV_8		0x2
+#define		APIC_TDR_DIV_16		0x3
+#define		APIC_TDR_DIV_32		0x8
+#define		APIC_TDR_DIV_64		0x9
+#define		APIC_TDR_DIV_128	0xA
+#define	APIC_EILVT0     0x500
+#define		APIC_EILVT_NR_AMD_K8	1	/* # of extended interrupts */
+#define		APIC_EILVT_NR_AMD_10H	4
+#define		APIC_EILVT_LVTOFF(x)	(((x) >> 4) & 0xF)
+#define		APIC_EILVT_MSG_FIX	0x0
+#define		APIC_EILVT_MSG_SMI	0x2
+#define		APIC_EILVT_MSG_NMI	0x4
+#define		APIC_EILVT_MSG_EXT	0x7
+#define		APIC_EILVT_MASKED	(1 << 16)
+#define	APIC_EILVT1     0x510
+#define	APIC_EILVT2     0x520
+#define	APIC_EILVT3     0x530
+
+#define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
+#define APIC_BASE_MSR	0x800
+#define X2APIC_ENABLE	(1UL << 10)
+
+#ifdef CONFIG_X86_32
+# define MAX_IO_APICS 64
+#else
+# define MAX_IO_APICS 128
+# define MAX_LOCAL_APIC 32768
+#endif
+
+/*
+ * All x86-64 systems are xAPIC compatible.
+ * In the following, "apicid" is a physical APIC ID.
+ */
+#define XAPIC_DEST_CPUS_SHIFT	4
+#define XAPIC_DEST_CPUS_MASK	((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
+#define XAPIC_DEST_CLUSTER_MASK	(XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
+#define APIC_CLUSTER(apicid)	((apicid) & XAPIC_DEST_CLUSTER_MASK)
+#define APIC_CLUSTERID(apicid)	(APIC_CLUSTER(apicid) >> XAPIC_DEST_CPUS_SHIFT)
+#define APIC_CPUID(apicid)	((apicid) & XAPIC_DEST_CPUS_MASK)
+#define NUM_APIC_CLUSTERS	((BAD_APICID + 1) >> XAPIC_DEST_CPUS_SHIFT)
+
+/*
+ * the local APIC register structure, memory mapped. Not terribly well
+ * tested, but we might eventually use this one in the future - the
+ * problem why we cannot use it right now is the P5 APIC, it has an
+ * errata which cannot take 8-bit reads and writes, only 32-bit ones ...
+ */
+#define u32 unsigned int
+
+struct local_apic {
+
+/*000*/	struct { u32 __reserved[4]; } __reserved_01;
+
+/*010*/	struct { u32 __reserved[4]; } __reserved_02;
+
+/*020*/	struct { /* APIC ID Register */
+		u32   __reserved_1	: 24,
+			phys_apic_id	:  4,
+			__reserved_2	:  4;
+		u32 __reserved[3];
+	} id;
+
+/*030*/	const
+	struct { /* APIC Version Register */
+		u32   version		:  8,
+			__reserved_1	:  8,
+			max_lvt		:  8,
+			__reserved_2	:  8;
+		u32 __reserved[3];
+	} version;
+
+/*040*/	struct { u32 __reserved[4]; } __reserved_03;
+
+/*050*/	struct { u32 __reserved[4]; } __reserved_04;
+
+/*060*/	struct { u32 __reserved[4]; } __reserved_05;
+
+/*070*/	struct { u32 __reserved[4]; } __reserved_06;
+
+/*080*/	struct { /* Task Priority Register */
+		u32   priority	:  8,
+			__reserved_1	: 24;
+		u32 __reserved_2[3];
+	} tpr;
+
+/*090*/	const
+	struct { /* Arbitration Priority Register */
+		u32   priority	:  8,
+			__reserved_1	: 24;
+		u32 __reserved_2[3];
+	} apr;
+
+/*0A0*/	const
+	struct { /* Processor Priority Register */
+		u32   priority	:  8,
+			__reserved_1	: 24;
+		u32 __reserved_2[3];
+	} ppr;
+
+/*0B0*/	struct { /* End Of Interrupt Register */
+		u32   eoi;
+		u32 __reserved[3];
+	} eoi;
+
+/*0C0*/	struct { u32 __reserved[4]; } __reserved_07;
+
+/*0D0*/	struct { /* Logical Destination Register */
+		u32   __reserved_1	: 24,
+			logical_dest	:  8;
+		u32 __reserved_2[3];
+	} ldr;
+
+/*0E0*/	struct { /* Destination Format Register */
+		u32   __reserved_1	: 28,
+			model		:  4;
+		u32 __reserved_2[3];
+	} dfr;
+
+/*0F0*/	struct { /* Spurious Interrupt Vector Register */
+		u32	spurious_vector	:  8,
+			apic_enabled	:  1,
+			focus_cpu	:  1,
+			__reserved_2	: 22;
+		u32 __reserved_3[3];
+	} svr;
+
+/*100*/	struct { /* In Service Register */
+/*170*/		u32 bitfield;
+		u32 __reserved[3];
+	} isr [8];
+
+/*180*/	struct { /* Trigger Mode Register */
+/*1F0*/		u32 bitfield;
+		u32 __reserved[3];
+	} tmr [8];
+
+/*200*/	struct { /* Interrupt Request Register */
+/*270*/		u32 bitfield;
+		u32 __reserved[3];
+	} irr [8];
+
+/*280*/	union { /* Error Status Register */
+		struct {
+			u32   send_cs_error			:  1,
+				receive_cs_error		:  1,
+				send_accept_error		:  1,
+				receive_accept_error		:  1,
+				__reserved_1			:  1,
+				send_illegal_vector		:  1,
+				receive_illegal_vector		:  1,
+				illegal_register_address	:  1,
+				__reserved_2			: 24;
+			u32 __reserved_3[3];
+		} error_bits;
+		struct {
+			u32 errors;
+			u32 __reserved_3[3];
+		} all_errors;
+	} esr;
+
+/*290*/	struct { u32 __reserved[4]; } __reserved_08;
+
+/*2A0*/	struct { u32 __reserved[4]; } __reserved_09;
+
+/*2B0*/	struct { u32 __reserved[4]; } __reserved_10;
+
+/*2C0*/	struct { u32 __reserved[4]; } __reserved_11;
+
+/*2D0*/	struct { u32 __reserved[4]; } __reserved_12;
+
+/*2E0*/	struct { u32 __reserved[4]; } __reserved_13;
+
+/*2F0*/	struct { u32 __reserved[4]; } __reserved_14;
+
+/*300*/	struct { /* Interrupt Command Register 1 */
+		u32   vector			:  8,
+			delivery_mode		:  3,
+			destination_mode	:  1,
+			delivery_status		:  1,
+			__reserved_1		:  1,
+			level			:  1,
+			trigger			:  1,
+			__reserved_2		:  2,
+			shorthand		:  2,
+			__reserved_3		:  12;
+		u32 __reserved_4[3];
+	} icr1;
+
+/*310*/	struct { /* Interrupt Command Register 2 */
+		union {
+			u32   __reserved_1	: 24,
+				phys_dest	:  4,
+				__reserved_2	:  4;
+			u32   __reserved_3	: 24,
+				logical_dest	:  8;
+		} dest;
+		u32 __reserved_4[3];
+	} icr2;
+
+/*320*/	struct { /* LVT - Timer */
+		u32   vector		:  8,
+			__reserved_1	:  4,
+			delivery_status	:  1,
+			__reserved_2	:  3,
+			mask		:  1,
+			timer_mode	:  1,
+			__reserved_3	: 14;
+		u32 __reserved_4[3];
+	} lvt_timer;
+
+/*330*/	struct { /* LVT - Thermal Sensor */
+		u32  vector		:  8,
+			delivery_mode	:  3,
+			__reserved_1	:  1,
+			delivery_status	:  1,
+			__reserved_2	:  3,
+			mask		:  1,
+			__reserved_3	: 15;
+		u32 __reserved_4[3];
+	} lvt_thermal;
+
+/*340*/	struct { /* LVT - Performance Counter */
+		u32   vector		:  8,
+			delivery_mode	:  3,
+			__reserved_1	:  1,
+			delivery_status	:  1,
+			__reserved_2	:  3,
+			mask		:  1,
+			__reserved_3	: 15;
+		u32 __reserved_4[3];
+	} lvt_pc;
+
+/*350*/	struct { /* LVT - LINT0 */
+		u32   vector		:  8,
+			delivery_mode	:  3,
+			__reserved_1	:  1,
+			delivery_status	:  1,
+			polarity	:  1,
+			remote_irr	:  1,
+			trigger		:  1,
+			mask		:  1,
+			__reserved_2	: 15;
+		u32 __reserved_3[3];
+	} lvt_lint0;
+
+/*360*/	struct { /* LVT - LINT1 */
+		u32   vector		:  8,
+			delivery_mode	:  3,
+			__reserved_1	:  1,
+			delivery_status	:  1,
+			polarity	:  1,
+			remote_irr	:  1,
+			trigger		:  1,
+			mask		:  1,
+			__reserved_2	: 15;
+		u32 __reserved_3[3];
+	} lvt_lint1;
+
+/*370*/	struct { /* LVT - Error */
+		u32   vector		:  8,
+			__reserved_1	:  4,
+			delivery_status	:  1,
+			__reserved_2	:  3,
+			mask		:  1,
+			__reserved_3	: 15;
+		u32 __reserved_4[3];
+	} lvt_error;
+
+/*380*/	struct { /* Timer Initial Count Register */
+		u32   initial_count;
+		u32 __reserved_2[3];
+	} timer_icr;
+
+/*390*/	const
+	struct { /* Timer Current Count Register */
+		u32   curr_count;
+		u32 __reserved_2[3];
+	} timer_ccr;
+
+/*3A0*/	struct { u32 __reserved[4]; } __reserved_16;
+
+/*3B0*/	struct { u32 __reserved[4]; } __reserved_17;
+
+/*3C0*/	struct { u32 __reserved[4]; } __reserved_18;
+
+/*3D0*/	struct { u32 __reserved[4]; } __reserved_19;
+
+/*3E0*/	struct { /* Timer Divide Configuration Register */
+		u32   divisor		:  4,
+			__reserved_1	: 28;
+		u32 __reserved_2[3];
+	} timer_dcr;
+
+/*3F0*/	struct { u32 __reserved[4]; } __reserved_20;
+
+} __attribute__ ((packed));
+
+#undef u32
+
+#ifdef CONFIG_X86_32
+ #define BAD_APICID 0xFFu
+#else
+ #define BAD_APICID 0xFFFFu
+#endif
+#endif /* _ASM_X86_APICDEF_H */
diff --git a/arch/x86/include/asm/arch_hooks.h b/arch/x86/include/asm/arch_hooks.h
new file mode 100644
index 0000000..cbd4957
--- /dev/null
+++ b/arch/x86/include/asm/arch_hooks.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_X86_ARCH_HOOKS_H
+#define _ASM_X86_ARCH_HOOKS_H
+
+#include <linux/interrupt.h>
+
+/*
+ *	linux/include/asm/arch_hooks.h
+ *
+ *	define the architecture specific hooks
+ */
+
+/* these aren't arch hooks, they are generic routines
+ * that can be used by the hooks */
+extern void init_ISA_irqs(void);
+extern irqreturn_t timer_interrupt(int irq, void *dev_id);
+
+/* these are the defined hooks */
+extern void intr_init_hook(void);
+extern void pre_intr_init_hook(void);
+extern void pre_setup_arch_hook(void);
+extern void trap_init_hook(void);
+extern void pre_time_init_hook(void);
+extern void time_init_hook(void);
+extern void mca_nmi_hook(void);
+
+#endif /* _ASM_X86_ARCH_HOOKS_H */
diff --git a/arch/x86/include/asm/asm.h b/arch/x86/include/asm/asm.h
new file mode 100644
index 0000000..56be78f
--- /dev/null
+++ b/arch/x86/include/asm/asm.h
@@ -0,0 +1,47 @@
+#ifndef _ASM_X86_ASM_H
+#define _ASM_X86_ASM_H
+
+#ifdef __ASSEMBLY__
+# define __ASM_FORM(x)	x
+# define __ASM_EX_SEC	.section __ex_table
+#else
+# define __ASM_FORM(x)	" " #x " "
+# define __ASM_EX_SEC	" .section __ex_table,\"a\"\n"
+#endif
+
+#ifdef CONFIG_X86_32
+# define __ASM_SEL(a,b) __ASM_FORM(a)
+#else
+# define __ASM_SEL(a,b) __ASM_FORM(b)
+#endif
+
+#define __ASM_SIZE(inst)	__ASM_SEL(inst##l, inst##q)
+#define __ASM_REG(reg)		__ASM_SEL(e##reg, r##reg)
+
+#define _ASM_PTR	__ASM_SEL(.long, .quad)
+#define _ASM_ALIGN	__ASM_SEL(.balign 4, .balign 8)
+
+#define _ASM_MOV	__ASM_SIZE(mov)
+#define _ASM_INC	__ASM_SIZE(inc)
+#define _ASM_DEC	__ASM_SIZE(dec)
+#define _ASM_ADD	__ASM_SIZE(add)
+#define _ASM_SUB	__ASM_SIZE(sub)
+#define _ASM_XADD	__ASM_SIZE(xadd)
+
+#define _ASM_AX		__ASM_REG(ax)
+#define _ASM_BX		__ASM_REG(bx)
+#define _ASM_CX		__ASM_REG(cx)
+#define _ASM_DX		__ASM_REG(dx)
+#define _ASM_SP		__ASM_REG(sp)
+#define _ASM_BP		__ASM_REG(bp)
+#define _ASM_SI		__ASM_REG(si)
+#define _ASM_DI		__ASM_REG(di)
+
+/* Exception table entry */
+# define _ASM_EXTABLE(from,to) \
+	__ASM_EX_SEC	\
+	_ASM_ALIGN "\n" \
+	_ASM_PTR #from "," #to "\n" \
+	" .previous\n"
+
+#endif /* _ASM_X86_ASM_H */
diff --git a/include/asm-x86/atomic.h b/arch/x86/include/asm/atomic.h
similarity index 100%
rename from include/asm-x86/atomic.h
rename to arch/x86/include/asm/atomic.h
diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
new file mode 100644
index 0000000..ad5b9f6
--- /dev/null
+++ b/arch/x86/include/asm/atomic_32.h
@@ -0,0 +1,259 @@
+#ifndef _ASM_X86_ATOMIC_32_H
+#define _ASM_X86_ATOMIC_32_H
+
+#include <linux/compiler.h>
+#include <asm/processor.h>
+#include <asm/cmpxchg.h>
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+/*
+ * Make sure gcc doesn't try to be clever and move things around
+ * on us. We need to use _exactly_ the address the user gave us,
+ * not some alias that contains the same information.
+ */
+typedef struct {
+	int counter;
+} atomic_t;
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+#define atomic_read(v)		((v)->counter)
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+#define atomic_set(v, i)	(((v)->counter) = (i))
+
+/**
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v.
+ */
+static inline void atomic_add(int i, atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "addl %1,%0"
+		     : "+m" (v->counter)
+		     : "ir" (i));
+}
+
+/**
+ * atomic_sub - subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "subl %1,%0"
+		     : "+m" (v->counter)
+		     : "ir" (i));
+}
+
+/**
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic_sub_and_test(int i, atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "subl %2,%0; sete %1"
+		     : "+m" (v->counter), "=qm" (c)
+		     : "ir" (i) : "memory");
+	return c;
+}
+
+/**
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+static inline void atomic_inc(atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "incl %0"
+		     : "+m" (v->counter));
+}
+
+/**
+ * atomic_dec - decrement atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1.
+ */
+static inline void atomic_dec(atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "decl %0"
+		     : "+m" (v->counter));
+}
+
+/**
+ * atomic_dec_and_test - decrement and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+static inline int atomic_dec_and_test(atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "decl %0; sete %1"
+		     : "+m" (v->counter), "=qm" (c)
+		     : : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic_inc_and_test(atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "incl %0; sete %1"
+		     : "+m" (v->counter), "=qm" (c)
+		     : : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic_add_negative - add and test if negative
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "addl %2,%0; sets %1"
+		     : "+m" (v->counter), "=qm" (c)
+		     : "ir" (i) : "memory");
+	return c;
+}
+
+/**
+ * atomic_add_return - add integer and return
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	int __i;
+#ifdef CONFIG_M386
+	unsigned long flags;
+	if (unlikely(boot_cpu_data.x86 <= 3))
+		goto no_xadd;
+#endif
+	/* Modern 486+ processor */
+	__i = i;
+	asm volatile(LOCK_PREFIX "xaddl %0, %1"
+		     : "+r" (i), "+m" (v->counter)
+		     : : "memory");
+	return i + __i;
+
+#ifdef CONFIG_M386
+no_xadd: /* Legacy 386 processor */
+	local_irq_save(flags);
+	__i = atomic_read(v);
+	atomic_set(v, i + __i);
+	local_irq_restore(flags);
+	return i + __i;
+#endif
+}
+
+/**
+ * atomic_sub_return - subtract integer and return
+ * @v: pointer of type atomic_t
+ * @i: integer value to subtract
+ *
+ * Atomically subtracts @i from @v and returns @v - @i
+ */
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	return atomic_add_return(-i, v);
+}
+
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+
+/**
+ * atomic_add_unless - add unless the number is already a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as @v was not already @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_inc_return(v)  (atomic_add_return(1, v))
+#define atomic_dec_return(v)  (atomic_sub_return(1, v))
+
+/* These are x86-specific, used by some header files */
+#define atomic_clear_mask(mask, addr)				\
+	asm volatile(LOCK_PREFIX "andl %0,%1"			\
+		     : : "r" (~(mask)), "m" (*(addr)) : "memory")
+
+#define atomic_set_mask(mask, addr)				\
+	asm volatile(LOCK_PREFIX "orl %0,%1"				\
+		     : : "r" (mask), "m" (*(addr)) : "memory")
+
+/* Atomic operations are already serializing on x86 */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#include <asm-generic/atomic.h>
+#endif /* _ASM_X86_ATOMIC_32_H */
diff --git a/arch/x86/include/asm/atomic_64.h b/arch/x86/include/asm/atomic_64.h
new file mode 100644
index 0000000..279d2a73
--- /dev/null
+++ b/arch/x86/include/asm/atomic_64.h
@@ -0,0 +1,473 @@
+#ifndef _ASM_X86_ATOMIC_64_H
+#define _ASM_X86_ATOMIC_64_H
+
+#include <asm/alternative.h>
+#include <asm/cmpxchg.h>
+
+/* atomic_t should be 32 bit signed type */
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+/*
+ * Make sure gcc doesn't try to be clever and move things around
+ * on us. We need to use _exactly_ the address the user gave us,
+ * not some alias that contains the same information.
+ */
+typedef struct {
+	int counter;
+} atomic_t;
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+#define atomic_read(v)		((v)->counter)
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+#define atomic_set(v, i)		(((v)->counter) = (i))
+
+/**
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v.
+ */
+static inline void atomic_add(int i, atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "addl %1,%0"
+		     : "=m" (v->counter)
+		     : "ir" (i), "m" (v->counter));
+}
+
+/**
+ * atomic_sub - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "subl %1,%0"
+		     : "=m" (v->counter)
+		     : "ir" (i), "m" (v->counter));
+}
+
+/**
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic_sub_and_test(int i, atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "subl %2,%0; sete %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "ir" (i), "m" (v->counter) : "memory");
+	return c;
+}
+
+/**
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+static inline void atomic_inc(atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "incl %0"
+		     : "=m" (v->counter)
+		     : "m" (v->counter));
+}
+
+/**
+ * atomic_dec - decrement atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1.
+ */
+static inline void atomic_dec(atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "decl %0"
+		     : "=m" (v->counter)
+		     : "m" (v->counter));
+}
+
+/**
+ * atomic_dec_and_test - decrement and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+static inline int atomic_dec_and_test(atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "decl %0; sete %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "m" (v->counter) : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic_inc_and_test(atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "incl %0; sete %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "m" (v->counter) : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic_add_negative - add and test if negative
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "addl %2,%0; sets %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "ir" (i), "m" (v->counter) : "memory");
+	return c;
+}
+
+/**
+ * atomic_add_return - add and return
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	int __i = i;
+	asm volatile(LOCK_PREFIX "xaddl %0, %1"
+		     : "+r" (i), "+m" (v->counter)
+		     : : "memory");
+	return i + __i;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	return atomic_add_return(-i, v);
+}
+
+#define atomic_inc_return(v)  (atomic_add_return(1, v))
+#define atomic_dec_return(v)  (atomic_sub_return(1, v))
+
+/* An 64bit atomic type */
+
+typedef struct {
+	long counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i)	{ (i) }
+
+/**
+ * atomic64_read - read atomic64 variable
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically reads the value of @v.
+ * Doesn't imply a read memory barrier.
+ */
+#define atomic64_read(v)		((v)->counter)
+
+/**
+ * atomic64_set - set atomic64 variable
+ * @v: pointer to type atomic64_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+#define atomic64_set(v, i)		(((v)->counter) = (i))
+
+/**
+ * atomic64_add - add integer to atomic64 variable
+ * @i: integer value to add
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically adds @i to @v.
+ */
+static inline void atomic64_add(long i, atomic64_t *v)
+{
+	asm volatile(LOCK_PREFIX "addq %1,%0"
+		     : "=m" (v->counter)
+		     : "er" (i), "m" (v->counter));
+}
+
+/**
+ * atomic64_sub - subtract the atomic64 variable
+ * @i: integer value to subtract
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static inline void atomic64_sub(long i, atomic64_t *v)
+{
+	asm volatile(LOCK_PREFIX "subq %1,%0"
+		     : "=m" (v->counter)
+		     : "er" (i), "m" (v->counter));
+}
+
+/**
+ * atomic64_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic64_sub_and_test(long i, atomic64_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "subq %2,%0; sete %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "er" (i), "m" (v->counter) : "memory");
+	return c;
+}
+
+/**
+ * atomic64_inc - increment atomic64 variable
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically increments @v by 1.
+ */
+static inline void atomic64_inc(atomic64_t *v)
+{
+	asm volatile(LOCK_PREFIX "incq %0"
+		     : "=m" (v->counter)
+		     : "m" (v->counter));
+}
+
+/**
+ * atomic64_dec - decrement atomic64 variable
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically decrements @v by 1.
+ */
+static inline void atomic64_dec(atomic64_t *v)
+{
+	asm volatile(LOCK_PREFIX "decq %0"
+		     : "=m" (v->counter)
+		     : "m" (v->counter));
+}
+
+/**
+ * atomic64_dec_and_test - decrement and test
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+static inline int atomic64_dec_and_test(atomic64_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "decq %0; sete %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "m" (v->counter) : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic64_inc_and_test - increment and test
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic64_inc_and_test(atomic64_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "incq %0; sete %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "m" (v->counter) : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic64_add_negative - add and test if negative
+ * @i: integer value to add
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+static inline int atomic64_add_negative(long i, atomic64_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "addq %2,%0; sets %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "er" (i), "m" (v->counter) : "memory");
+	return c;
+}
+
+/**
+ * atomic64_add_return - add and return
+ * @i: integer value to add
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static inline long atomic64_add_return(long i, atomic64_t *v)
+{
+	long __i = i;
+	asm volatile(LOCK_PREFIX "xaddq %0, %1;"
+		     : "+r" (i), "+m" (v->counter)
+		     : : "memory");
+	return i + __i;
+}
+
+static inline long atomic64_sub_return(long i, atomic64_t *v)
+{
+	return atomic64_add_return(-i, v);
+}
+
+#define atomic64_inc_return(v)  (atomic64_add_return(1, (v)))
+#define atomic64_dec_return(v)  (atomic64_sub_return(1, (v)))
+
+#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+/**
+ * atomic64_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+	long c, old;
+	c = atomic64_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic64_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+/**
+ * atomic_inc_short - increment of a short integer
+ * @v: pointer to type int
+ *
+ * Atomically adds 1 to @v
+ * Returns the new value of @u
+ */
+static inline short int atomic_inc_short(short int *v)
+{
+	asm(LOCK_PREFIX "addw $1, %0" : "+m" (*v));
+	return *v;
+}
+
+/**
+ * atomic_or_long - OR of two long integers
+ * @v1: pointer to type unsigned long
+ * @v2: pointer to type unsigned long
+ *
+ * Atomically ORs @v1 and @v2
+ * Returns the result of the OR
+ */
+static inline void atomic_or_long(unsigned long *v1, unsigned long v2)
+{
+	asm(LOCK_PREFIX "orq %1, %0" : "+m" (*v1) : "r" (v2));
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+/* These are x86-specific, used by some header files */
+#define atomic_clear_mask(mask, addr)					\
+	asm volatile(LOCK_PREFIX "andl %0,%1"				\
+		     : : "r" (~(mask)), "m" (*(addr)) : "memory")
+
+#define atomic_set_mask(mask, addr)					\
+	asm volatile(LOCK_PREFIX "orl %0,%1"				\
+		     : : "r" ((unsigned)(mask)), "m" (*(addr))		\
+		     : "memory")
+
+/* Atomic operations are already serializing on x86 */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#include <asm-generic/atomic.h>
+#endif /* _ASM_X86_ATOMIC_64_H */
diff --git a/arch/x86/include/asm/auxvec.h b/arch/x86/include/asm/auxvec.h
new file mode 100644
index 0000000..1316b4c
--- /dev/null
+++ b/arch/x86/include/asm/auxvec.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_X86_AUXVEC_H
+#define _ASM_X86_AUXVEC_H
+/*
+ * Architecture-neutral AT_ values in 0-17, leave some room
+ * for more of them, start the x86-specific ones at 32.
+ */
+#ifdef __i386__
+#define AT_SYSINFO		32
+#endif
+#define AT_SYSINFO_EHDR		33
+
+#endif /* _ASM_X86_AUXVEC_H */
diff --git a/include/asm-x86/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
similarity index 100%
rename from include/asm-x86/bigsmp/apic.h
rename to arch/x86/include/asm/bigsmp/apic.h
diff --git a/include/asm-x86/bigsmp/apicdef.h b/arch/x86/include/asm/bigsmp/apicdef.h
similarity index 100%
rename from include/asm-x86/bigsmp/apicdef.h
rename to arch/x86/include/asm/bigsmp/apicdef.h
diff --git a/include/asm-x86/bigsmp/ipi.h b/arch/x86/include/asm/bigsmp/ipi.h
similarity index 100%
rename from include/asm-x86/bigsmp/ipi.h
rename to arch/x86/include/asm/bigsmp/ipi.h
diff --git a/arch/x86/include/asm/bios_ebda.h b/arch/x86/include/asm/bios_ebda.h
new file mode 100644
index 0000000..3c75210
--- /dev/null
+++ b/arch/x86/include/asm/bios_ebda.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_X86_BIOS_EBDA_H
+#define _ASM_X86_BIOS_EBDA_H
+
+#include <asm/io.h>
+
+/*
+ * there is a real-mode segmented pointer pointing to the
+ * 4K EBDA area at 0x40E.
+ */
+static inline unsigned int get_bios_ebda(void)
+{
+	unsigned int address = *(unsigned short *)phys_to_virt(0x40E);
+	address <<= 4;
+	return address;	/* 0 means none */
+}
+
+void reserve_ebda_region(void);
+
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+/*
+ * This is obviously not a great place for this, but we want to be
+ * able to scatter it around anywhere in the kernel.
+ */
+void check_for_bios_corruption(void);
+void start_periodic_check_for_corruption(void);
+#else
+static inline void check_for_bios_corruption(void)
+{
+}
+
+static inline void start_periodic_check_for_corruption(void)
+{
+}
+#endif
+
+#endif /* _ASM_X86_BIOS_EBDA_H */
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
new file mode 100644
index 0000000..3600103
--- /dev/null
+++ b/arch/x86/include/asm/bitops.h
@@ -0,0 +1,451 @@
+#ifndef _ASM_X86_BITOPS_H
+#define _ASM_X86_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <asm/alternative.h>
+
+/*
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 1)
+/* Technically wrong, but this avoids compilation errors on some gcc
+   versions. */
+#define BITOP_ADDR(x) "=m" (*(volatile long *) (x))
+#else
+#define BITOP_ADDR(x) "+m" (*(volatile long *) (x))
+#endif
+
+#define ADDR				BITOP_ADDR(addr)
+
+/*
+ * We do the locked ops that don't return the old value as
+ * a mask operation on a byte.
+ */
+#define IS_IMMEDIATE(nr)		(__builtin_constant_p(nr))
+#define CONST_MASK_ADDR(nr, addr)	BITOP_ADDR((void *)(addr) + ((nr)>>3))
+#define CONST_MASK(nr)			(1 << ((nr) & 7))
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ *
+ * Note: there are no guarantees that this function will not be reordered
+ * on non x86 architectures, so if you are writing portable code,
+ * make sure not to rely on its reordering guarantees.
+ *
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(unsigned int nr, volatile unsigned long *addr)
+{
+	if (IS_IMMEDIATE(nr)) {
+		asm volatile(LOCK_PREFIX "orb %1,%0"
+			: CONST_MASK_ADDR(nr, addr)
+			: "iq" ((u8)CONST_MASK(nr))
+			: "memory");
+	} else {
+		asm volatile(LOCK_PREFIX "bts %1,%0"
+			: BITOP_ADDR(addr) : "Ir" (nr) : "memory");
+	}
+}
+
+/**
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __set_bit(int nr, volatile unsigned long *addr)
+{
+	asm volatile("bts %1,%0" : ADDR : "Ir" (nr) : "memory");
+}
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static inline void clear_bit(int nr, volatile unsigned long *addr)
+{
+	if (IS_IMMEDIATE(nr)) {
+		asm volatile(LOCK_PREFIX "andb %1,%0"
+			: CONST_MASK_ADDR(nr, addr)
+			: "iq" ((u8)~CONST_MASK(nr)));
+	} else {
+		asm volatile(LOCK_PREFIX "btr %1,%0"
+			: BITOP_ADDR(addr)
+			: "Ir" (nr));
+	}
+}
+
+/*
+ * clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and implies release semantics before the memory
+ * operation. It can be used for an unlock.
+ */
+static inline void clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
+{
+	barrier();
+	clear_bit(nr, addr);
+}
+
+static inline void __clear_bit(int nr, volatile unsigned long *addr)
+{
+	asm volatile("btr %1,%0" : ADDR : "Ir" (nr));
+}
+
+/*
+ * __clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * __clear_bit() is non-atomic and implies release semantics before the memory
+ * operation. It can be used for an unlock if no other CPUs can concurrently
+ * modify other bits in the word.
+ *
+ * No memory barrier is required here, because x86 cannot reorder stores past
+ * older loads. Same principle as spin_unlock.
+ */
+static inline void __clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
+{
+	barrier();
+	__clear_bit(nr, addr);
+}
+
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to change
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __change_bit(int nr, volatile unsigned long *addr)
+{
+	asm volatile("btc %1,%0" : ADDR : "Ir" (nr));
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(int nr, volatile unsigned long *addr)
+{
+	asm volatile(LOCK_PREFIX "btc %1,%0" : ADDR : "Ir" (nr));
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile(LOCK_PREFIX "bts %2,%1\n\t"
+		     "sbb %0,%0" : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
+
+	return oldbit;
+}
+
+/**
+ * test_and_set_bit_lock - Set a bit and return its old value for lock
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This is the same as test_and_set_bit on x86.
+ */
+static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr)
+{
+	return test_and_set_bit(nr, addr);
+}
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm("bts %2,%1\n\t"
+	    "sbb %0,%0"
+	    : "=r" (oldbit), ADDR
+	    : "Ir" (nr));
+	return oldbit;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile(LOCK_PREFIX "btr %2,%1\n\t"
+		     "sbb %0,%0"
+		     : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
+
+	return oldbit;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile("btr %2,%1\n\t"
+		     "sbb %0,%0"
+		     : "=r" (oldbit), ADDR
+		     : "Ir" (nr));
+	return oldbit;
+}
+
+/* WARNING: non atomic and it can be reordered! */
+static inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile("btc %2,%1\n\t"
+		     "sbb %0,%0"
+		     : "=r" (oldbit), ADDR
+		     : "Ir" (nr) : "memory");
+
+	return oldbit;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile(LOCK_PREFIX "btc %2,%1\n\t"
+		     "sbb %0,%0"
+		     : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
+
+	return oldbit;
+}
+
+static inline int constant_test_bit(int nr, const volatile unsigned long *addr)
+{
+	return ((1UL << (nr % BITS_PER_LONG)) &
+		(((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0;
+}
+
+static inline int variable_test_bit(int nr, volatile const unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile("bt %2,%1\n\t"
+		     "sbb %0,%0"
+		     : "=r" (oldbit)
+		     : "m" (*(unsigned long *)addr), "Ir" (nr));
+
+	return oldbit;
+}
+
+#if 0 /* Fool kernel-doc since it doesn't do macros yet */
+/**
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static int test_bit(int nr, const volatile unsigned long *addr);
+#endif
+
+#define test_bit(nr, addr)			\
+	(__builtin_constant_p((nr))		\
+	 ? constant_test_bit((nr), (addr))	\
+	 : variable_test_bit((nr), (addr)))
+
+/**
+ * __ffs - find first set bit in word
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+	asm("bsf %1,%0"
+		: "=r" (word)
+		: "rm" (word));
+	return word;
+}
+
+/**
+ * ffz - find first zero bit in word
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+	asm("bsf %1,%0"
+		: "=r" (word)
+		: "r" (~word));
+	return word;
+}
+
+/*
+ * __fls: find last set bit in word
+ * @word: The word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __fls(unsigned long word)
+{
+	asm("bsr %1,%0"
+	    : "=r" (word)
+	    : "rm" (word));
+	return word;
+}
+
+#ifdef __KERNEL__
+/**
+ * ffs - find first set bit in word
+ * @x: the word to search
+ *
+ * This is defined the same way as the libc and compiler builtin ffs
+ * routines, therefore differs in spirit from the other bitops.
+ *
+ * ffs(value) returns 0 if value is 0 or the position of the first
+ * set bit if value is nonzero. The first (least significant) bit
+ * is at position 1.
+ */
+static inline int ffs(int x)
+{
+	int r;
+#ifdef CONFIG_X86_CMOV
+	asm("bsfl %1,%0\n\t"
+	    "cmovzl %2,%0"
+	    : "=r" (r) : "rm" (x), "r" (-1));
+#else
+	asm("bsfl %1,%0\n\t"
+	    "jnz 1f\n\t"
+	    "movl $-1,%0\n"
+	    "1:" : "=r" (r) : "rm" (x));
+#endif
+	return r + 1;
+}
+
+/**
+ * fls - find last set bit in word
+ * @x: the word to search
+ *
+ * This is defined in a similar way as the libc and compiler builtin
+ * ffs, but returns the position of the most significant set bit.
+ *
+ * fls(value) returns 0 if value is 0 or the position of the last
+ * set bit if value is nonzero. The last (most significant) bit is
+ * at position 32.
+ */
+static inline int fls(int x)
+{
+	int r;
+#ifdef CONFIG_X86_CMOV
+	asm("bsrl %1,%0\n\t"
+	    "cmovzl %2,%0"
+	    : "=&r" (r) : "rm" (x), "rm" (-1));
+#else
+	asm("bsrl %1,%0\n\t"
+	    "jnz 1f\n\t"
+	    "movl $-1,%0\n"
+	    "1:" : "=r" (r) : "rm" (x));
+#endif
+	return r + 1;
+}
+#endif /* __KERNEL__ */
+
+#undef ADDR
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/sched.h>
+
+#define ARCH_HAS_FAST_MULTIPLIER 1
+
+#include <asm-generic/bitops/hweight.h>
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/fls64.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+
+#define ext2_set_bit_atomic(lock, nr, addr)			\
+	test_and_set_bit((nr), (unsigned long *)(addr))
+#define ext2_clear_bit_atomic(lock, nr, addr)			\
+	test_and_clear_bit((nr), (unsigned long *)(addr))
+
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_X86_BITOPS_H */
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
new file mode 100644
index 0000000..dd61616
--- /dev/null
+++ b/arch/x86/include/asm/boot.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_X86_BOOT_H
+#define _ASM_X86_BOOT_H
+
+/* Don't touch these, unless you really know what you're doing. */
+#define DEF_SYSSEG	0x1000
+#define DEF_SYSSIZE	0x7F00
+
+/* Internal svga startup constants */
+#define NORMAL_VGA	0xffff		/* 80x25 mode */
+#define EXTENDED_VGA	0xfffe		/* 80x50 mode */
+#define ASK_VGA		0xfffd		/* ask for it at bootup */
+
+/* Physical address where kernel should be loaded. */
+#define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
+				+ (CONFIG_PHYSICAL_ALIGN - 1)) \
+				& ~(CONFIG_PHYSICAL_ALIGN - 1))
+
+#ifdef CONFIG_X86_64
+#define BOOT_HEAP_SIZE	0x7000
+#define BOOT_STACK_SIZE	0x4000
+#else
+#define BOOT_HEAP_SIZE	0x4000
+#define BOOT_STACK_SIZE	0x1000
+#endif
+
+#endif /* _ASM_X86_BOOT_H */
diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h
new file mode 100644
index 0000000..433adae
--- /dev/null
+++ b/arch/x86/include/asm/bootparam.h
@@ -0,0 +1,111 @@
+#ifndef _ASM_X86_BOOTPARAM_H
+#define _ASM_X86_BOOTPARAM_H
+
+#include <linux/types.h>
+#include <linux/screen_info.h>
+#include <linux/apm_bios.h>
+#include <linux/edd.h>
+#include <asm/e820.h>
+#include <asm/ist.h>
+#include <video/edid.h>
+
+/* setup data types */
+#define SETUP_NONE			0
+#define SETUP_E820_EXT			1
+
+/* extensible setup data list node */
+struct setup_data {
+	__u64 next;
+	__u32 type;
+	__u32 len;
+	__u8 data[0];
+};
+
+struct setup_header {
+	__u8	setup_sects;
+	__u16	root_flags;
+	__u32	syssize;
+	__u16	ram_size;
+#define RAMDISK_IMAGE_START_MASK	0x07FF
+#define RAMDISK_PROMPT_FLAG		0x8000
+#define RAMDISK_LOAD_FLAG		0x4000
+	__u16	vid_mode;
+	__u16	root_dev;
+	__u16	boot_flag;
+	__u16	jump;
+	__u32	header;
+	__u16	version;
+	__u32	realmode_swtch;
+	__u16	start_sys;
+	__u16	kernel_version;
+	__u8	type_of_loader;
+	__u8	loadflags;
+#define LOADED_HIGH	(1<<0)
+#define QUIET_FLAG	(1<<5)
+#define KEEP_SEGMENTS	(1<<6)
+#define CAN_USE_HEAP	(1<<7)
+	__u16	setup_move_size;
+	__u32	code32_start;
+	__u32	ramdisk_image;
+	__u32	ramdisk_size;
+	__u32	bootsect_kludge;
+	__u16	heap_end_ptr;
+	__u16	_pad1;
+	__u32	cmd_line_ptr;
+	__u32	initrd_addr_max;
+	__u32	kernel_alignment;
+	__u8	relocatable_kernel;
+	__u8	_pad2[3];
+	__u32	cmdline_size;
+	__u32	hardware_subarch;
+	__u64	hardware_subarch_data;
+	__u32	payload_offset;
+	__u32	payload_length;
+	__u64	setup_data;
+} __attribute__((packed));
+
+struct sys_desc_table {
+	__u16 length;
+	__u8  table[14];
+};
+
+struct efi_info {
+	__u32 efi_loader_signature;
+	__u32 efi_systab;
+	__u32 efi_memdesc_size;
+	__u32 efi_memdesc_version;
+	__u32 efi_memmap;
+	__u32 efi_memmap_size;
+	__u32 efi_systab_hi;
+	__u32 efi_memmap_hi;
+};
+
+/* The so-called "zeropage" */
+struct boot_params {
+	struct screen_info screen_info;			/* 0x000 */
+	struct apm_bios_info apm_bios_info;		/* 0x040 */
+	__u8  _pad2[12];				/* 0x054 */
+	struct ist_info ist_info;			/* 0x060 */
+	__u8  _pad3[16];				/* 0x070 */
+	__u8  hd0_info[16];	/* obsolete! */		/* 0x080 */
+	__u8  hd1_info[16];	/* obsolete! */		/* 0x090 */
+	struct sys_desc_table sys_desc_table;		/* 0x0a0 */
+	__u8  _pad4[144];				/* 0x0b0 */
+	struct edid_info edid_info;			/* 0x140 */
+	struct efi_info efi_info;			/* 0x1c0 */
+	__u32 alt_mem_k;				/* 0x1e0 */
+	__u32 scratch;		/* Scratch field! */	/* 0x1e4 */
+	__u8  e820_entries;				/* 0x1e8 */
+	__u8  eddbuf_entries;				/* 0x1e9 */
+	__u8  edd_mbr_sig_buf_entries;			/* 0x1ea */
+	__u8  _pad6[6];					/* 0x1eb */
+	struct setup_header hdr;    /* setup header */	/* 0x1f1 */
+	__u8  _pad7[0x290-0x1f1-sizeof(struct setup_header)];
+	__u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX];	/* 0x290 */
+	struct e820entry e820_map[E820MAX];		/* 0x2d0 */
+	__u8  _pad8[48];				/* 0xcd0 */
+	struct edd_info eddbuf[EDDMAXNR];		/* 0xd00 */
+	__u8  _pad9[276];				/* 0xeec */
+} __attribute__((packed));
+
+#endif /* _ASM_X86_BOOTPARAM_H */
diff --git a/arch/x86/include/asm/bug.h b/arch/x86/include/asm/bug.h
new file mode 100644
index 0000000..3def206
--- /dev/null
+++ b/arch/x86/include/asm/bug.h
@@ -0,0 +1,39 @@
+#ifndef _ASM_X86_BUG_H
+#define _ASM_X86_BUG_H
+
+#ifdef CONFIG_BUG
+#define HAVE_ARCH_BUG
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+
+#ifdef CONFIG_X86_32
+# define __BUG_C0	"2:\t.long 1b, %c0\n"
+#else
+# define __BUG_C0	"2:\t.quad 1b, %c0\n"
+#endif
+
+#define BUG()							\
+do {								\
+	asm volatile("1:\tud2\n"				\
+		     ".pushsection __bug_table,\"a\"\n"		\
+		     __BUG_C0					\
+		     "\t.word %c1, 0\n"				\
+		     "\t.org 2b+%c2\n"				\
+		     ".popsection"				\
+		     : : "i" (__FILE__), "i" (__LINE__),	\
+		     "i" (sizeof(struct bug_entry)));		\
+	for (;;) ;						\
+} while (0)
+
+#else
+#define BUG()							\
+do {								\
+	asm volatile("ud2");					\
+	for (;;) ;						\
+} while (0)
+#endif
+
+#endif /* !CONFIG_BUG */
+
+#include <asm-generic/bug.h>
+#endif /* _ASM_X86_BUG_H */
diff --git a/arch/x86/include/asm/bugs.h b/arch/x86/include/asm/bugs.h
new file mode 100644
index 0000000..08abf63
--- /dev/null
+++ b/arch/x86/include/asm/bugs.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_X86_BUGS_H
+#define _ASM_X86_BUGS_H
+
+extern void check_bugs(void);
+
+#if defined(CONFIG_CPU_SUP_INTEL) && defined(CONFIG_X86_32)
+int ppro_with_ram_bug(void);
+#else
+static inline int ppro_with_ram_bug(void) { return 0; }
+#endif
+
+#endif /* _ASM_X86_BUGS_H */
diff --git a/arch/x86/include/asm/byteorder.h b/arch/x86/include/asm/byteorder.h
new file mode 100644
index 0000000..e02ae2d8
--- /dev/null
+++ b/arch/x86/include/asm/byteorder.h
@@ -0,0 +1,81 @@
+#ifndef _ASM_X86_BYTEORDER_H
+#define _ASM_X86_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+
+#ifdef __i386__
+
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+#ifdef CONFIG_X86_BSWAP
+	asm("bswap %0" : "=r" (x) : "0" (x));
+#else
+	asm("xchgb %b0,%h0\n\t"	/* swap lower bytes	*/
+	    "rorl $16,%0\n\t"	/* swap words		*/
+	    "xchgb %b0,%h0"	/* swap higher bytes	*/
+	    : "=q" (x)
+	    : "0" (x));
+#endif
+	return x;
+}
+
+static inline __attribute_const__ __u64 ___arch__swab64(__u64 val)
+{
+	union {
+		struct {
+			__u32 a;
+			__u32 b;
+		} s;
+		__u64 u;
+	} v;
+	v.u = val;
+#ifdef CONFIG_X86_BSWAP
+	asm("bswapl %0 ; bswapl %1 ; xchgl %0,%1"
+	    : "=r" (v.s.a), "=r" (v.s.b)
+	    : "0" (v.s.a), "1" (v.s.b));
+#else
+	v.s.a = ___arch__swab32(v.s.a);
+	v.s.b = ___arch__swab32(v.s.b);
+	asm("xchgl %0,%1"
+	    : "=r" (v.s.a), "=r" (v.s.b)
+	    : "0" (v.s.a), "1" (v.s.b));
+#endif
+	return v.u;
+}
+
+#else /* __i386__ */
+
+static inline __attribute_const__ __u64 ___arch__swab64(__u64 x)
+{
+	asm("bswapq %0"
+	    : "=r" (x)
+	    : "0" (x));
+	return x;
+}
+
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+	asm("bswapl %0"
+	    : "=r" (x)
+	    : "0" (x));
+	return x;
+}
+
+#endif
+
+/* Do not define swab16.  Gcc is smart enough to recognize "C" version and
+   convert it into rotation or exhange.  */
+
+#define __arch__swab64(x) ___arch__swab64(x)
+#define __arch__swab32(x) ___arch__swab32(x)
+
+#define __BYTEORDER_HAS_U64__
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_X86_BYTEORDER_H */
diff --git a/arch/x86/include/asm/cache.h b/arch/x86/include/asm/cache.h
new file mode 100644
index 0000000..5d367ca
--- /dev/null
+++ b/arch/x86/include/asm/cache.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_X86_CACHE_H
+#define _ASM_X86_CACHE_H
+
+/* L1 cache line size */
+#define L1_CACHE_SHIFT	(CONFIG_X86_L1_CACHE_SHIFT)
+#define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
+
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+#ifdef CONFIG_X86_VSMP
+/* vSMP Internode cacheline shift */
+#define INTERNODE_CACHE_SHIFT (12)
+#ifdef CONFIG_SMP
+#define __cacheline_aligned_in_smp					\
+	__attribute__((__aligned__(1 << (INTERNODE_CACHE_SHIFT))))	\
+	__attribute__((__section__(".data.page_aligned")))
+#endif
+#endif
+
+#endif /* _ASM_X86_CACHE_H */
diff --git a/arch/x86/include/asm/cacheflush.h b/arch/x86/include/asm/cacheflush.h
new file mode 100644
index 0000000..2f84665
--- /dev/null
+++ b/arch/x86/include/asm/cacheflush.h
@@ -0,0 +1,118 @@
+#ifndef _ASM_X86_CACHEFLUSH_H
+#define _ASM_X86_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/* Caches aren't brain-dead on the intel. */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma, pg)		do { } while (0)
+#define flush_icache_user_range(vma, pg, adr, len)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
+	memcpy((dst), (src), (len))
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
+	memcpy((dst), (src), (len))
+
+#define PG_non_WB				PG_arch_1
+PAGEFLAG(NonWB, non_WB)
+
+/*
+ * The set_memory_* API can be used to change various attributes of a virtual
+ * address range. The attributes include:
+ * Cachability   : UnCached, WriteCombining, WriteBack
+ * Executability : eXeutable, NoteXecutable
+ * Read/Write    : ReadOnly, ReadWrite
+ * Presence      : NotPresent
+ *
+ * Within a catagory, the attributes are mutually exclusive.
+ *
+ * The implementation of this API will take care of various aspects that
+ * are associated with changing such attributes, such as:
+ * - Flushing TLBs
+ * - Flushing CPU caches
+ * - Making sure aliases of the memory behind the mapping don't violate
+ *   coherency rules as defined by the CPU in the system.
+ *
+ * What this API does not do:
+ * - Provide exclusion between various callers - including callers that
+ *   operation on other mappings of the same physical page
+ * - Restore default attributes when a page is freed
+ * - Guarantee that mappings other than the requested one are
+ *   in any state, other than that these do not violate rules for
+ *   the CPU you have. Do not depend on any effects on other mappings,
+ *   CPUs other than the one you have may have more relaxed rules.
+ * The caller is required to take care of these.
+ */
+
+int _set_memory_uc(unsigned long addr, int numpages);
+int _set_memory_wc(unsigned long addr, int numpages);
+int _set_memory_wb(unsigned long addr, int numpages);
+int set_memory_uc(unsigned long addr, int numpages);
+int set_memory_wc(unsigned long addr, int numpages);
+int set_memory_wb(unsigned long addr, int numpages);
+int set_memory_x(unsigned long addr, int numpages);
+int set_memory_nx(unsigned long addr, int numpages);
+int set_memory_ro(unsigned long addr, int numpages);
+int set_memory_rw(unsigned long addr, int numpages);
+int set_memory_np(unsigned long addr, int numpages);
+int set_memory_4k(unsigned long addr, int numpages);
+
+int set_memory_array_uc(unsigned long *addr, int addrinarray);
+int set_memory_array_wb(unsigned long *addr, int addrinarray);
+
+/*
+ * For legacy compatibility with the old APIs, a few functions
+ * are provided that work on a "struct page".
+ * These functions operate ONLY on the 1:1 kernel mapping of the
+ * memory that the struct page represents, and internally just
+ * call the set_memory_* function. See the description of the
+ * set_memory_* function for more details on conventions.
+ *
+ * These APIs should be considered *deprecated* and are likely going to
+ * be removed in the future.
+ * The reason for this is the implicit operation on the 1:1 mapping only,
+ * making this not a generally useful API.
+ *
+ * Specifically, many users of the old APIs had a virtual address,
+ * called virt_to_page() or vmalloc_to_page() on that address to
+ * get a struct page* that the old API required.
+ * To convert these cases, use set_memory_*() on the original
+ * virtual address, do not use these functions.
+ */
+
+int set_pages_uc(struct page *page, int numpages);
+int set_pages_wb(struct page *page, int numpages);
+int set_pages_x(struct page *page, int numpages);
+int set_pages_nx(struct page *page, int numpages);
+int set_pages_ro(struct page *page, int numpages);
+int set_pages_rw(struct page *page, int numpages);
+
+
+void clflush_cache_range(void *addr, unsigned int size);
+
+#ifdef CONFIG_DEBUG_RODATA
+void mark_rodata_ro(void);
+extern const int rodata_test_data;
+#endif
+
+#ifdef CONFIG_DEBUG_RODATA_TEST
+int rodata_test(void);
+#else
+static inline int rodata_test(void)
+{
+	return 0;
+}
+#endif
+
+#endif /* _ASM_X86_CACHEFLUSH_H */
diff --git a/arch/x86/include/asm/calgary.h b/arch/x86/include/asm/calgary.h
new file mode 100644
index 0000000..b03bedb
--- /dev/null
+++ b/arch/x86/include/asm/calgary.h
@@ -0,0 +1,72 @@
+/*
+ * Derived from include/asm-powerpc/iommu.h
+ *
+ * Copyright IBM Corporation, 2006-2007
+ *
+ * Author: Jon Mason <jdmason@us.ibm.com>
+ * Author: Muli Ben-Yehuda <muli@il.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_X86_CALGARY_H
+#define _ASM_X86_CALGARY_H
+
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/timer.h>
+#include <asm/types.h>
+
+struct iommu_table {
+	struct cal_chipset_ops *chip_ops; /* chipset specific funcs */
+	unsigned long  it_base;      /* mapped address of tce table */
+	unsigned long  it_hint;      /* Hint for next alloc */
+	unsigned long *it_map;       /* A simple allocation bitmap for now */
+	void __iomem  *bbar;         /* Bridge BAR */
+	u64	       tar_val;      /* Table Address Register */
+	struct timer_list watchdog_timer;
+	spinlock_t     it_lock;      /* Protects it_map */
+	unsigned int   it_size;      /* Size of iommu table in entries */
+	unsigned char  it_busno;     /* Bus number this table belongs to */
+};
+
+struct cal_chipset_ops {
+	void (*handle_quirks)(struct iommu_table *tbl, struct pci_dev *dev);
+	void (*tce_cache_blast)(struct iommu_table *tbl);
+	void (*dump_error_regs)(struct iommu_table *tbl);
+};
+
+#define TCE_TABLE_SIZE_UNSPECIFIED	~0
+#define TCE_TABLE_SIZE_64K		0
+#define TCE_TABLE_SIZE_128K		1
+#define TCE_TABLE_SIZE_256K		2
+#define TCE_TABLE_SIZE_512K		3
+#define TCE_TABLE_SIZE_1M		4
+#define TCE_TABLE_SIZE_2M		5
+#define TCE_TABLE_SIZE_4M		6
+#define TCE_TABLE_SIZE_8M		7
+
+extern int use_calgary;
+
+#ifdef CONFIG_CALGARY_IOMMU
+extern int calgary_iommu_init(void);
+extern void detect_calgary(void);
+#else
+static inline int calgary_iommu_init(void) { return 1; }
+static inline void detect_calgary(void) { return; }
+#endif
+
+#endif /* _ASM_X86_CALGARY_H */
diff --git a/include/asm-x86/calling.h b/arch/x86/include/asm/calling.h
similarity index 100%
rename from include/asm-x86/calling.h
rename to arch/x86/include/asm/calling.h
diff --git a/include/asm-x86/checksum.h b/arch/x86/include/asm/checksum.h
similarity index 100%
rename from include/asm-x86/checksum.h
rename to arch/x86/include/asm/checksum.h
diff --git a/arch/x86/include/asm/checksum_32.h b/arch/x86/include/asm/checksum_32.h
new file mode 100644
index 0000000..7c5ef8b
--- /dev/null
+++ b/arch/x86/include/asm/checksum_32.h
@@ -0,0 +1,189 @@
+#ifndef _ASM_X86_CHECKSUM_32_H
+#define _ASM_X86_CHECKSUM_32_H
+
+#include <linux/in6.h>
+
+#include <asm/uaccess.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst,
+					    int len, __wsum sum,
+					    int *src_err_ptr, int *dst_err_ptr);
+
+/*
+ *	Note: when you get a NULL pointer exception here this means someone
+ *	passed in an incorrect kernel address to one of these functions.
+ *
+ *	If you use these functions directly please don't forget the
+ *	access_ok().
+ */
+static inline __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+					       int len, __wsum sum)
+{
+	return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL);
+}
+
+static inline __wsum csum_partial_copy_from_user(const void __user *src,
+						 void *dst,
+						 int len, __wsum sum,
+						 int *err_ptr)
+{
+	might_sleep();
+	return csum_partial_copy_generic((__force void *)src, dst,
+					 len, sum, err_ptr, NULL);
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ *	By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
+ *	Arnt Gulbrandsen.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int sum;
+
+	asm volatile("movl (%1), %0	;\n"
+		     "subl $4, %2	;\n"
+		     "jbe 2f		;\n"
+		     "addl 4(%1), %0	;\n"
+		     "adcl 8(%1), %0	;\n"
+		     "adcl 12(%1), %0;\n"
+		     "1:	adcl 16(%1), %0	;\n"
+		     "lea 4(%1), %1	;\n"
+		     "decl %2	;\n"
+		     "jne 1b		;\n"
+		     "adcl $0, %0	;\n"
+		     "movl %0, %2	;\n"
+		     "shrl $16, %0	;\n"
+		     "addw %w2, %w0	;\n"
+		     "adcl $0, %0	;\n"
+		     "notl %0	;\n"
+		     "2:		;\n"
+	/* Since the input registers which are loaded with iph and ihl
+	   are modified, we must also specify them as outputs, or gcc
+	   will assume they contain their original values. */
+		     : "=r" (sum), "=r" (iph), "=r" (ihl)
+		     : "1" (iph), "2" (ihl)
+		     : "memory");
+	return (__force __sum16)sum;
+}
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	asm("addl %1, %0		;\n"
+	    "adcl $0xffff, %0	;\n"
+	    : "=r" (sum)
+	    : "r" ((__force u32)sum << 16),
+	      "0" ((__force u32)sum & 0xffff0000));
+	return (__force __sum16)(~(__force u32)sum >> 16);
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+					unsigned short len,
+					unsigned short proto,
+					__wsum sum)
+{
+	asm("addl %1, %0	;\n"
+	    "adcl %2, %0	;\n"
+	    "adcl %3, %0	;\n"
+	    "adcl $0, %0	;\n"
+	    : "=r" (sum)
+	    : "g" (daddr), "g"(saddr),
+	      "g" ((len + proto) << 8), "0" (sum));
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+					unsigned short len,
+					unsigned short proto,
+					__wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+    return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+				      const struct in6_addr *daddr,
+				      __u32 len, unsigned short proto,
+				      __wsum sum)
+{
+	asm("addl 0(%1), %0	;\n"
+	    "adcl 4(%1), %0	;\n"
+	    "adcl 8(%1), %0	;\n"
+	    "adcl 12(%1), %0	;\n"
+	    "adcl 0(%2), %0	;\n"
+	    "adcl 4(%2), %0	;\n"
+	    "adcl 8(%2), %0	;\n"
+	    "adcl 12(%2), %0	;\n"
+	    "adcl %3, %0	;\n"
+	    "adcl %4, %0	;\n"
+	    "adcl $0, %0	;\n"
+	    : "=&r" (sum)
+	    : "r" (saddr), "r" (daddr),
+	      "r" (htonl(len)), "r" (htonl(proto)), "0" (sum));
+
+	return csum_fold(sum);
+}
+
+/*
+ *	Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static inline __wsum csum_and_copy_to_user(const void *src,
+					   void __user *dst,
+					   int len, __wsum sum,
+					   int *err_ptr)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, dst, len))
+		return csum_partial_copy_generic(src, (__force void *)dst,
+						 len, sum, NULL, err_ptr);
+
+	if (len)
+		*err_ptr = -EFAULT;
+
+	return (__force __wsum)-1; /* invalid checksum */
+}
+
+#endif /* _ASM_X86_CHECKSUM_32_H */
diff --git a/arch/x86/include/asm/checksum_64.h b/arch/x86/include/asm/checksum_64.h
new file mode 100644
index 0000000..9bfdc41
--- /dev/null
+++ b/arch/x86/include/asm/checksum_64.h
@@ -0,0 +1,191 @@
+#ifndef _ASM_X86_CHECKSUM_64_H
+#define _ASM_X86_CHECKSUM_64_H
+
+/*
+ * Checksums for x86-64
+ * Copyright 2002 by Andi Kleen, SuSE Labs
+ * with some code from asm-x86/checksum.h
+ */
+
+#include <linux/compiler.h>
+#include <asm/uaccess.h>
+#include <asm/byteorder.h>
+
+/**
+ * csum_fold - Fold and invert a 32bit checksum.
+ * sum: 32bit unfolded sum
+ *
+ * Fold a 32bit running checksum to 16bit and invert it. This is usually
+ * the last step before putting a checksum into a packet.
+ * Make sure not to mix with 64bit checksums.
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	asm("  addl %1,%0\n"
+	    "  adcl $0xffff,%0"
+	    : "=r" (sum)
+	    : "r" ((__force u32)sum << 16),
+	      "0" ((__force u32)sum & 0xffff0000));
+	return (__force __sum16)(~(__force u32)sum >> 16);
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ *	By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
+ *	Arnt Gulbrandsen.
+ */
+
+/**
+ * ip_fast_csum - Compute the IPv4 header checksum efficiently.
+ * iph: ipv4 header
+ * ihl: length of header / 4
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int sum;
+
+	asm("  movl (%1), %0\n"
+	    "  subl $4, %2\n"
+	    "  jbe 2f\n"
+	    "  addl 4(%1), %0\n"
+	    "  adcl 8(%1), %0\n"
+	    "  adcl 12(%1), %0\n"
+	    "1: adcl 16(%1), %0\n"
+	    "  lea 4(%1), %1\n"
+	    "  decl %2\n"
+	    "  jne	1b\n"
+	    "  adcl $0, %0\n"
+	    "  movl %0, %2\n"
+	    "  shrl $16, %0\n"
+	    "  addw %w2, %w0\n"
+	    "  adcl $0, %0\n"
+	    "  notl %0\n"
+	    "2:"
+	/* Since the input registers which are loaded with iph and ihl
+	   are modified, we must also specify them as outputs, or gcc
+	   will assume they contain their original values. */
+	    : "=r" (sum), "=r" (iph), "=r" (ihl)
+	    : "1" (iph), "2" (ihl)
+	    : "memory");
+	return (__force __sum16)sum;
+}
+
+/**
+ * csum_tcpup_nofold - Compute an IPv4 pseudo header checksum.
+ * @saddr: source address
+ * @daddr: destination address
+ * @len: length of packet
+ * @proto: ip protocol of packet
+ * @sum: initial sum to be added in (32bit unfolded)
+ *
+ * Returns the pseudo header checksum the input data. Result is
+ * 32bit unfolded.
+ */
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		   unsigned short proto, __wsum sum)
+{
+	asm("  addl %1, %0\n"
+	    "  adcl %2, %0\n"
+	    "  adcl %3, %0\n"
+	    "  adcl $0, %0\n"
+	    : "=r" (sum)
+	    : "g" (daddr), "g" (saddr),
+	      "g" ((len + proto)<<8), "0" (sum));
+	return sum;
+}
+
+
+/**
+ * csum_tcpup_magic - Compute an IPv4 pseudo header checksum.
+ * @saddr: source address
+ * @daddr: destination address
+ * @len: length of packet
+ * @proto: ip protocol of packet
+ * @sum: initial sum to be added in (32bit unfolded)
+ *
+ * Returns the 16bit pseudo header checksum the input data already
+ * complemented and ready to be filled in.
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+					unsigned short len,
+					unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/**
+ * csum_partial - Compute an internet checksum.
+ * @buff: buffer to be checksummed
+ * @len: length of buffer.
+ * @sum: initial sum to be added in (32bit unfolded)
+ *
+ * Returns the 32bit unfolded internet checksum of the buffer.
+ * Before filling it in it needs to be csum_fold()'ed.
+ * buff should be aligned to a 64bit boundary if possible.
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+#define  _HAVE_ARCH_COPY_AND_CSUM_FROM_USER 1
+#define HAVE_CSUM_COPY_USER 1
+
+
+/* Do not call this directly. Use the wrappers below */
+extern __wsum csum_partial_copy_generic(const void *src, const void *dst,
+					int len, __wsum sum,
+					int *src_err_ptr, int *dst_err_ptr);
+
+
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+					  int len, __wsum isum, int *errp);
+extern __wsum csum_partial_copy_to_user(const void *src, void __user *dst,
+					int len, __wsum isum, int *errp);
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+					int len, __wsum sum);
+
+/* Old names. To be removed. */
+#define csum_and_copy_to_user csum_partial_copy_to_user
+#define csum_and_copy_from_user csum_partial_copy_from_user
+
+/**
+ * ip_compute_csum - Compute an 16bit IP checksum.
+ * @buff: buffer address.
+ * @len: length of buffer.
+ *
+ * Returns the 16bit folded/inverted checksum of the passed buffer.
+ * Ready to fill in.
+ */
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+/**
+ * csum_ipv6_magic - Compute checksum of an IPv6 pseudo header.
+ * @saddr: source address
+ * @daddr: destination address
+ * @len: length of packet
+ * @proto: protocol of packet
+ * @sum: initial sum (32bit unfolded) to be added in
+ *
+ * Computes an IPv6 pseudo header checksum. This sum is added the checksum
+ * into UDP/TCP packets and contains some link layer information.
+ * Returns the unfolded 32bit checksum.
+ */
+
+struct in6_addr;
+
+#define _HAVE_ARCH_IPV6_CSUM 1
+extern __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+		__u32 len, unsigned short proto, __wsum sum);
+
+static inline unsigned add32_with_carry(unsigned a, unsigned b)
+{
+	asm("addl %2,%0\n\t"
+	    "adcl $0,%0"
+	    : "=r" (a)
+	    : "0" (a), "r" (b));
+	return a;
+}
+
+#endif /* _ASM_X86_CHECKSUM_64_H */
diff --git a/include/asm-x86/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h
similarity index 100%
rename from include/asm-x86/cmpxchg.h
rename to arch/x86/include/asm/cmpxchg.h
diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h
new file mode 100644
index 0000000..82ceb78
--- /dev/null
+++ b/arch/x86/include/asm/cmpxchg_32.h
@@ -0,0 +1,344 @@
+#ifndef _ASM_X86_CMPXCHG_32_H
+#define _ASM_X86_CMPXCHG_32_H
+
+#include <linux/bitops.h> /* for LOCK_PREFIX */
+
+/*
+ * Note: if you use set64_bit(), __cmpxchg64(), or their variants, you
+ *       you need to test for the feature in boot_cpu_data.
+ */
+
+#define xchg(ptr, v)							\
+	((__typeof__(*(ptr)))__xchg((unsigned long)(v), (ptr), sizeof(*(ptr))))
+
+struct __xchg_dummy {
+	unsigned long a[100];
+};
+#define __xg(x) ((struct __xchg_dummy *)(x))
+
+/*
+ * The semantics of XCHGCMP8B are a bit strange, this is why
+ * there is a loop and the loading of %%eax and %%edx has to
+ * be inside. This inlines well in most cases, the cached
+ * cost is around ~38 cycles. (in the future we might want
+ * to do an SIMD/3DNOW!/MMX/FPU 64-bit store here, but that
+ * might have an implicit FPU-save as a cost, so it's not
+ * clear which path to go.)
+ *
+ * cmpxchg8b must be used with the lock prefix here to allow
+ * the instruction to be executed atomically, see page 3-102
+ * of the instruction set reference 24319102.pdf. We need
+ * the reader side to see the coherent 64bit value.
+ */
+static inline void __set_64bit(unsigned long long *ptr,
+			       unsigned int low, unsigned int high)
+{
+	asm volatile("\n1:\t"
+		     "movl (%0), %%eax\n\t"
+		     "movl 4(%0), %%edx\n\t"
+		     LOCK_PREFIX "cmpxchg8b (%0)\n\t"
+		     "jnz 1b"
+		     : /* no outputs */
+		     : "D"(ptr),
+		       "b"(low),
+		       "c"(high)
+		     : "ax", "dx", "memory");
+}
+
+static inline void __set_64bit_constant(unsigned long long *ptr,
+					unsigned long long value)
+{
+	__set_64bit(ptr, (unsigned int)value, (unsigned int)(value >> 32));
+}
+
+#define ll_low(x)	*(((unsigned int *)&(x)) + 0)
+#define ll_high(x)	*(((unsigned int *)&(x)) + 1)
+
+static inline void __set_64bit_var(unsigned long long *ptr,
+				   unsigned long long value)
+{
+	__set_64bit(ptr, ll_low(value), ll_high(value));
+}
+
+#define set_64bit(ptr, value)			\
+	(__builtin_constant_p((value))		\
+	 ? __set_64bit_constant((ptr), (value))	\
+	 : __set_64bit_var((ptr), (value)))
+
+#define _set_64bit(ptr, value)						\
+	(__builtin_constant_p(value)					\
+	 ? __set_64bit(ptr, (unsigned int)(value),			\
+		       (unsigned int)((value) >> 32))			\
+	 : __set_64bit(ptr, ll_low((value)), ll_high((value))))
+
+/*
+ * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
+ * Note 2: xchg has side effect, so that attribute volatile is necessary,
+ *	  but generally the primitive is invalid, *ptr is output argument. --ANK
+ */
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+				   int size)
+{
+	switch (size) {
+	case 1:
+		asm volatile("xchgb %b0,%1"
+			     : "=q" (x)
+			     : "m" (*__xg(ptr)), "0" (x)
+			     : "memory");
+		break;
+	case 2:
+		asm volatile("xchgw %w0,%1"
+			     : "=r" (x)
+			     : "m" (*__xg(ptr)), "0" (x)
+			     : "memory");
+		break;
+	case 4:
+		asm volatile("xchgl %0,%1"
+			     : "=r" (x)
+			     : "m" (*__xg(ptr)), "0" (x)
+			     : "memory");
+		break;
+	}
+	return x;
+}
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#ifdef CONFIG_X86_CMPXCHG
+#define __HAVE_ARCH_CMPXCHG 1
+#define cmpxchg(ptr, o, n)						\
+	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),	\
+				       (unsigned long)(n),		\
+				       sizeof(*(ptr))))
+#define sync_cmpxchg(ptr, o, n)						\
+	((__typeof__(*(ptr)))__sync_cmpxchg((ptr), (unsigned long)(o),	\
+					    (unsigned long)(n),		\
+					    sizeof(*(ptr))))
+#define cmpxchg_local(ptr, o, n)					\
+	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
+					     (unsigned long)(n),	\
+					     sizeof(*(ptr))))
+#endif
+
+#ifdef CONFIG_X86_CMPXCHG64
+#define cmpxchg64(ptr, o, n)						\
+	((__typeof__(*(ptr)))__cmpxchg64((ptr), (unsigned long long)(o), \
+					 (unsigned long long)(n)))
+#define cmpxchg64_local(ptr, o, n)					\
+	((__typeof__(*(ptr)))__cmpxchg64_local((ptr), (unsigned long long)(o), \
+					       (unsigned long long)(n)))
+#endif
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+				      unsigned long new, int size)
+{
+	unsigned long prev;
+	switch (size) {
+	case 1:
+		asm volatile(LOCK_PREFIX "cmpxchgb %b1,%2"
+			     : "=a"(prev)
+			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 2:
+		asm volatile(LOCK_PREFIX "cmpxchgw %w1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 4:
+		asm volatile(LOCK_PREFIX "cmpxchgl %1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	}
+	return old;
+}
+
+/*
+ * Always use locked operations when touching memory shared with a
+ * hypervisor, since the system may be SMP even if the guest kernel
+ * isn't.
+ */
+static inline unsigned long __sync_cmpxchg(volatile void *ptr,
+					   unsigned long old,
+					   unsigned long new, int size)
+{
+	unsigned long prev;
+	switch (size) {
+	case 1:
+		asm volatile("lock; cmpxchgb %b1,%2"
+			     : "=a"(prev)
+			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 2:
+		asm volatile("lock; cmpxchgw %w1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 4:
+		asm volatile("lock; cmpxchgl %1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	}
+	return old;
+}
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+					    unsigned long old,
+					    unsigned long new, int size)
+{
+	unsigned long prev;
+	switch (size) {
+	case 1:
+		asm volatile("cmpxchgb %b1,%2"
+			     : "=a"(prev)
+			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 2:
+		asm volatile("cmpxchgw %w1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 4:
+		asm volatile("cmpxchgl %1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	}
+	return old;
+}
+
+static inline unsigned long long __cmpxchg64(volatile void *ptr,
+					     unsigned long long old,
+					     unsigned long long new)
+{
+	unsigned long long prev;
+	asm volatile(LOCK_PREFIX "cmpxchg8b %3"
+		     : "=A"(prev)
+		     : "b"((unsigned long)new),
+		       "c"((unsigned long)(new >> 32)),
+		       "m"(*__xg(ptr)),
+		       "0"(old)
+		     : "memory");
+	return prev;
+}
+
+static inline unsigned long long __cmpxchg64_local(volatile void *ptr,
+						   unsigned long long old,
+						   unsigned long long new)
+{
+	unsigned long long prev;
+	asm volatile("cmpxchg8b %3"
+		     : "=A"(prev)
+		     : "b"((unsigned long)new),
+		       "c"((unsigned long)(new >> 32)),
+		       "m"(*__xg(ptr)),
+		       "0"(old)
+		     : "memory");
+	return prev;
+}
+
+#ifndef CONFIG_X86_CMPXCHG
+/*
+ * Building a kernel capable running on 80386. It may be necessary to
+ * simulate the cmpxchg on the 80386 CPU. For that purpose we define
+ * a function for each of the sizes we support.
+ */
+
+extern unsigned long cmpxchg_386_u8(volatile void *, u8, u8);
+extern unsigned long cmpxchg_386_u16(volatile void *, u16, u16);
+extern unsigned long cmpxchg_386_u32(volatile void *, u32, u32);
+
+static inline unsigned long cmpxchg_386(volatile void *ptr, unsigned long old,
+					unsigned long new, int size)
+{
+	switch (size) {
+	case 1:
+		return cmpxchg_386_u8(ptr, old, new);
+	case 2:
+		return cmpxchg_386_u16(ptr, old, new);
+	case 4:
+		return cmpxchg_386_u32(ptr, old, new);
+	}
+	return old;
+}
+
+#define cmpxchg(ptr, o, n)						\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	if (likely(boot_cpu_data.x86 > 3))				\
+		__ret = (__typeof__(*(ptr)))__cmpxchg((ptr),		\
+				(unsigned long)(o), (unsigned long)(n),	\
+				sizeof(*(ptr)));			\
+	else								\
+		__ret = (__typeof__(*(ptr)))cmpxchg_386((ptr),		\
+				(unsigned long)(o), (unsigned long)(n),	\
+				sizeof(*(ptr)));			\
+	__ret;								\
+})
+#define cmpxchg_local(ptr, o, n)					\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	if (likely(boot_cpu_data.x86 > 3))				\
+		__ret = (__typeof__(*(ptr)))__cmpxchg_local((ptr),	\
+				(unsigned long)(o), (unsigned long)(n),	\
+				sizeof(*(ptr)));			\
+	else								\
+		__ret = (__typeof__(*(ptr)))cmpxchg_386((ptr),		\
+				(unsigned long)(o), (unsigned long)(n),	\
+				sizeof(*(ptr)));			\
+	__ret;								\
+})
+#endif
+
+#ifndef CONFIG_X86_CMPXCHG64
+/*
+ * Building a kernel capable running on 80386 and 80486. It may be necessary
+ * to simulate the cmpxchg8b on the 80386 and 80486 CPU.
+ */
+
+extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64);
+
+#define cmpxchg64(ptr, o, n)						\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	if (likely(boot_cpu_data.x86 > 4))				\
+		__ret = (__typeof__(*(ptr)))__cmpxchg64((ptr),		\
+				(unsigned long long)(o),		\
+				(unsigned long long)(n));		\
+	else								\
+		__ret = (__typeof__(*(ptr)))cmpxchg_486_u64((ptr),	\
+				(unsigned long long)(o),		\
+				(unsigned long long)(n));		\
+	__ret;								\
+})
+#define cmpxchg64_local(ptr, o, n)					\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	if (likely(boot_cpu_data.x86 > 4))				\
+		__ret = (__typeof__(*(ptr)))__cmpxchg64_local((ptr),	\
+				(unsigned long long)(o),		\
+				(unsigned long long)(n));		\
+	else								\
+		__ret = (__typeof__(*(ptr)))cmpxchg_486_u64((ptr),	\
+				(unsigned long long)(o),		\
+				(unsigned long long)(n));		\
+	__ret;								\
+})
+
+#endif
+
+#endif /* _ASM_X86_CMPXCHG_32_H */
diff --git a/arch/x86/include/asm/cmpxchg_64.h b/arch/x86/include/asm/cmpxchg_64.h
new file mode 100644
index 0000000..52de72e
--- /dev/null
+++ b/arch/x86/include/asm/cmpxchg_64.h
@@ -0,0 +1,185 @@
+#ifndef _ASM_X86_CMPXCHG_64_H
+#define _ASM_X86_CMPXCHG_64_H
+
+#include <asm/alternative.h> /* Provides LOCK_PREFIX */
+
+#define xchg(ptr, v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v), \
+						 (ptr), sizeof(*(ptr))))
+
+#define __xg(x) ((volatile long *)(x))
+
+static inline void set_64bit(volatile unsigned long *ptr, unsigned long val)
+{
+	*ptr = val;
+}
+
+#define _set_64bit set_64bit
+
+/*
+ * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
+ * Note 2: xchg has side effect, so that attribute volatile is necessary,
+ *	  but generally the primitive is invalid, *ptr is output argument. --ANK
+ */
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+				   int size)
+{
+	switch (size) {
+	case 1:
+		asm volatile("xchgb %b0,%1"
+			     : "=q" (x)
+			     : "m" (*__xg(ptr)), "0" (x)
+			     : "memory");
+		break;
+	case 2:
+		asm volatile("xchgw %w0,%1"
+			     : "=r" (x)
+			     : "m" (*__xg(ptr)), "0" (x)
+			     : "memory");
+		break;
+	case 4:
+		asm volatile("xchgl %k0,%1"
+			     : "=r" (x)
+			     : "m" (*__xg(ptr)), "0" (x)
+			     : "memory");
+		break;
+	case 8:
+		asm volatile("xchgq %0,%1"
+			     : "=r" (x)
+			     : "m" (*__xg(ptr)), "0" (x)
+			     : "memory");
+		break;
+	}
+	return x;
+}
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+				      unsigned long new, int size)
+{
+	unsigned long prev;
+	switch (size) {
+	case 1:
+		asm volatile(LOCK_PREFIX "cmpxchgb %b1,%2"
+			     : "=a"(prev)
+			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 2:
+		asm volatile(LOCK_PREFIX "cmpxchgw %w1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 4:
+		asm volatile(LOCK_PREFIX "cmpxchgl %k1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 8:
+		asm volatile(LOCK_PREFIX "cmpxchgq %1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	}
+	return old;
+}
+
+/*
+ * Always use locked operations when touching memory shared with a
+ * hypervisor, since the system may be SMP even if the guest kernel
+ * isn't.
+ */
+static inline unsigned long __sync_cmpxchg(volatile void *ptr,
+					   unsigned long old,
+					   unsigned long new, int size)
+{
+	unsigned long prev;
+	switch (size) {
+	case 1:
+		asm volatile("lock; cmpxchgb %b1,%2"
+			     : "=a"(prev)
+			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 2:
+		asm volatile("lock; cmpxchgw %w1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 4:
+		asm volatile("lock; cmpxchgl %1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	}
+	return old;
+}
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+					    unsigned long old,
+					    unsigned long new, int size)
+{
+	unsigned long prev;
+	switch (size) {
+	case 1:
+		asm volatile("cmpxchgb %b1,%2"
+			     : "=a"(prev)
+			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 2:
+		asm volatile("cmpxchgw %w1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 4:
+		asm volatile("cmpxchgl %k1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	case 8:
+		asm volatile("cmpxchgq %1,%2"
+			     : "=a"(prev)
+			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
+			     : "memory");
+		return prev;
+	}
+	return old;
+}
+
+#define cmpxchg(ptr, o, n)						\
+	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),	\
+				       (unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64(ptr, o, n)						\
+({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg((ptr), (o), (n));					\
+})
+#define cmpxchg_local(ptr, o, n)					\
+	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
+					     (unsigned long)(n),	\
+					     sizeof(*(ptr))))
+#define sync_cmpxchg(ptr, o, n)						\
+	((__typeof__(*(ptr)))__sync_cmpxchg((ptr), (unsigned long)(o),	\
+					    (unsigned long)(n),		\
+					    sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n)					\
+({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+})
+
+#endif /* _ASM_X86_CMPXCHG_64_H */
diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h
new file mode 100644
index 0000000..9a9c7bd
--- /dev/null
+++ b/arch/x86/include/asm/compat.h
@@ -0,0 +1,218 @@
+#ifndef _ASM_X86_COMPAT_H
+#define _ASM_X86_COMPAT_H
+
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <asm/user32.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_pid_t;
+typedef u16		__compat_uid_t;
+typedef u16		__compat_gid_t;
+typedef u32		__compat_uid32_t;
+typedef u32		__compat_gid32_t;
+typedef u16		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u16		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef u16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_timer_t;
+typedef s32		compat_key_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef s64 __attribute__((aligned(4))) compat_s64;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+typedef u64 __attribute__((aligned(4))) compat_u64;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	u16		__pad1;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	__compat_uid_t	st_uid;
+	__compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	u16		__pad2;
+	u32		st_size;
+	u32		st_blksize;
+	u32		st_blocks;
+	u32		st_atime;
+	u32		st_atime_nsec;
+	u32		st_mtime;
+	u32		st_mtime_nsec;
+	u32		st_ctime;
+	u32		st_ctime_nsec;
+	u32		__unused4;
+	u32		__unused5;
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/*
+ * IA32 uses 4 byte alignment for 64 bit quantities,
+ * so we need to pack this structure.
+ */
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+} __attribute__((packed));
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_spare[5];
+};
+
+#define COMPAT_RLIM_OLD_INFINITY	0x7fffffff
+#define COMPAT_RLIM_INFINITY		0xffffffff
+
+typedef u32		compat_old_sigset_t;	/* at least 32 bits */
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32               compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid32_t uid;
+	__compat_gid32_t gid;
+	__compat_uid32_t cuid;
+	__compat_gid32_t cgid;
+	unsigned short mode;
+	unsigned short __pad1;
+	unsigned short seq;
+	unsigned short __pad2;
+	compat_ulong_t unused1;
+	compat_ulong_t unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	compat_time_t  sem_otime;
+	compat_ulong_t __unused1;
+	compat_time_t  sem_ctime;
+	compat_ulong_t __unused2;
+	compat_ulong_t sem_nsems;
+	compat_ulong_t __unused3;
+	compat_ulong_t __unused4;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	compat_time_t  msg_stime;
+	compat_ulong_t __unused1;
+	compat_time_t  msg_rtime;
+	compat_ulong_t __unused2;
+	compat_time_t  msg_ctime;
+	compat_ulong_t __unused3;
+	compat_ulong_t msg_cbytes;
+	compat_ulong_t msg_qnum;
+	compat_ulong_t msg_qbytes;
+	compat_pid_t   msg_lspid;
+	compat_pid_t   msg_lrpid;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	compat_size_t  shm_segsz;
+	compat_time_t  shm_atime;
+	compat_ulong_t __unused1;
+	compat_time_t  shm_dtime;
+	compat_ulong_t __unused2;
+	compat_time_t  shm_ctime;
+	compat_ulong_t __unused3;
+	compat_pid_t   shm_cpid;
+	compat_pid_t   shm_lpid;
+	compat_ulong_t shm_nattch;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+/*
+ * The type of struct elf_prstatus.pr_reg in compatible core dumps.
+ */
+typedef struct user_regs_struct32 compat_elf_gregset_t;
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = task_pt_regs(current);
+	return (void __user *)regs->sp - len;
+}
+
+static inline int is_compat_task(void)
+{
+	return current_thread_info()->status & TS_COMPAT;
+}
+
+#endif /* _ASM_X86_COMPAT_H */
diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
new file mode 100644
index 0000000..bae482d
--- /dev/null
+++ b/arch/x86/include/asm/cpu.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_X86_CPU_H
+#define _ASM_X86_CPU_H
+
+#include <linux/device.h>
+#include <linux/cpu.h>
+#include <linux/topology.h>
+#include <linux/nodemask.h>
+#include <linux/percpu.h>
+
+struct x86_cpu {
+	struct cpu cpu;
+};
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern int arch_register_cpu(int num);
+extern void arch_unregister_cpu(int);
+#endif
+
+DECLARE_PER_CPU(int, cpu_state);
+#endif /* _ASM_X86_CPU_H */
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
new file mode 100644
index 0000000..f73e95d
--- /dev/null
+++ b/arch/x86/include/asm/cpufeature.h
@@ -0,0 +1,271 @@
+/*
+ * Defines x86 CPU feature bits
+ */
+#ifndef _ASM_X86_CPUFEATURE_H
+#define _ASM_X86_CPUFEATURE_H
+
+#include <asm/required-features.h>
+
+#define NCAPINTS	9	/* N 32-bit words worth of info */
+
+/*
+ * Note: If the comment begins with a quoted string, that string is used
+ * in /proc/cpuinfo instead of the macro name.  If the string is "",
+ * this feature bit is not displayed in /proc/cpuinfo at all.
+ */
+
+/* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */
+#define X86_FEATURE_FPU		(0*32+ 0) /* Onboard FPU */
+#define X86_FEATURE_VME		(0*32+ 1) /* Virtual Mode Extensions */
+#define X86_FEATURE_DE		(0*32+ 2) /* Debugging Extensions */
+#define X86_FEATURE_PSE		(0*32+ 3) /* Page Size Extensions */
+#define X86_FEATURE_TSC		(0*32+ 4) /* Time Stamp Counter */
+#define X86_FEATURE_MSR		(0*32+ 5) /* Model-Specific Registers */
+#define X86_FEATURE_PAE		(0*32+ 6) /* Physical Address Extensions */
+#define X86_FEATURE_MCE		(0*32+ 7) /* Machine Check Architecture */
+#define X86_FEATURE_CX8		(0*32+ 8) /* CMPXCHG8 instruction */
+#define X86_FEATURE_APIC	(0*32+ 9) /* Onboard APIC */
+#define X86_FEATURE_SEP		(0*32+11) /* SYSENTER/SYSEXIT */
+#define X86_FEATURE_MTRR	(0*32+12) /* Memory Type Range Registers */
+#define X86_FEATURE_PGE		(0*32+13) /* Page Global Enable */
+#define X86_FEATURE_MCA		(0*32+14) /* Machine Check Architecture */
+#define X86_FEATURE_CMOV	(0*32+15) /* CMOV instructions */
+					  /* (plus FCMOVcc, FCOMI with FPU) */
+#define X86_FEATURE_PAT		(0*32+16) /* Page Attribute Table */
+#define X86_FEATURE_PSE36	(0*32+17) /* 36-bit PSEs */
+#define X86_FEATURE_PN		(0*32+18) /* Processor serial number */
+#define X86_FEATURE_CLFLSH	(0*32+19) /* "clflush" CLFLUSH instruction */
+#define X86_FEATURE_DS		(0*32+21) /* "dts" Debug Store */
+#define X86_FEATURE_ACPI	(0*32+22) /* ACPI via MSR */
+#define X86_FEATURE_MMX		(0*32+23) /* Multimedia Extensions */
+#define X86_FEATURE_FXSR	(0*32+24) /* FXSAVE/FXRSTOR, CR4.OSFXSR */
+#define X86_FEATURE_XMM		(0*32+25) /* "sse" */
+#define X86_FEATURE_XMM2	(0*32+26) /* "sse2" */
+#define X86_FEATURE_SELFSNOOP	(0*32+27) /* "ss" CPU self snoop */
+#define X86_FEATURE_HT		(0*32+28) /* Hyper-Threading */
+#define X86_FEATURE_ACC		(0*32+29) /* "tm" Automatic clock control */
+#define X86_FEATURE_IA64	(0*32+30) /* IA-64 processor */
+#define X86_FEATURE_PBE		(0*32+31) /* Pending Break Enable */
+
+/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
+/* Don't duplicate feature flags which are redundant with Intel! */
+#define X86_FEATURE_SYSCALL	(1*32+11) /* SYSCALL/SYSRET */
+#define X86_FEATURE_MP		(1*32+19) /* MP Capable. */
+#define X86_FEATURE_NX		(1*32+20) /* Execute Disable */
+#define X86_FEATURE_MMXEXT	(1*32+22) /* AMD MMX extensions */
+#define X86_FEATURE_FXSR_OPT	(1*32+25) /* FXSAVE/FXRSTOR optimizations */
+#define X86_FEATURE_GBPAGES	(1*32+26) /* "pdpe1gb" GB pages */
+#define X86_FEATURE_RDTSCP	(1*32+27) /* RDTSCP */
+#define X86_FEATURE_LM		(1*32+29) /* Long Mode (x86-64) */
+#define X86_FEATURE_3DNOWEXT	(1*32+30) /* AMD 3DNow! extensions */
+#define X86_FEATURE_3DNOW	(1*32+31) /* 3DNow! */
+
+/* Transmeta-defined CPU features, CPUID level 0x80860001, word 2 */
+#define X86_FEATURE_RECOVERY	(2*32+ 0) /* CPU in recovery mode */
+#define X86_FEATURE_LONGRUN	(2*32+ 1) /* Longrun power control */
+#define X86_FEATURE_LRTI	(2*32+ 3) /* LongRun table interface */
+
+/* Other features, Linux-defined mapping, word 3 */
+/* This range is used for feature bits which conflict or are synthesized */
+#define X86_FEATURE_CXMMX	(3*32+ 0) /* Cyrix MMX extensions */
+#define X86_FEATURE_K6_MTRR	(3*32+ 1) /* AMD K6 nonstandard MTRRs */
+#define X86_FEATURE_CYRIX_ARR	(3*32+ 2) /* Cyrix ARRs (= MTRRs) */
+#define X86_FEATURE_CENTAUR_MCR	(3*32+ 3) /* Centaur MCRs (= MTRRs) */
+/* cpu types for specific tunings: */
+#define X86_FEATURE_K8		(3*32+ 4) /* "" Opteron, Athlon64 */
+#define X86_FEATURE_K7		(3*32+ 5) /* "" Athlon */
+#define X86_FEATURE_P3		(3*32+ 6) /* "" P3 */
+#define X86_FEATURE_P4		(3*32+ 7) /* "" P4 */
+#define X86_FEATURE_CONSTANT_TSC (3*32+ 8) /* TSC ticks at a constant rate */
+#define X86_FEATURE_UP		(3*32+ 9) /* smp kernel running on up */
+#define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* "" FXSAVE leaks FOP/FIP/FOP */
+#define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */
+#define X86_FEATURE_NOPL	(3*32+20) /* The NOPL (0F 1F) instructions */
+#define X86_FEATURE_PEBS	(3*32+12) /* Precise-Event Based Sampling */
+#define X86_FEATURE_BTS		(3*32+13) /* Branch Trace Store */
+#define X86_FEATURE_SYSCALL32	(3*32+14) /* "" syscall in ia32 userspace */
+#define X86_FEATURE_SYSENTER32	(3*32+15) /* "" sysenter in ia32 userspace */
+#define X86_FEATURE_REP_GOOD	(3*32+16) /* rep microcode works well */
+#define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* "" Mfence synchronizes RDTSC */
+#define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* "" Lfence synchronizes RDTSC */
+#define X86_FEATURE_11AP	(3*32+19) /* "" Bad local APIC aka 11AP */
+#define X86_FEATURE_NOPL	(3*32+20) /* The NOPL (0F 1F) instructions */
+#define X86_FEATURE_AMDC1E	(3*32+21) /* AMD C1E detected */
+#define X86_FEATURE_XTOPOLOGY	(3*32+21) /* cpu topology enum extensions */
+
+/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
+#define X86_FEATURE_XMM3	(4*32+ 0) /* "pni" SSE-3 */
+#define X86_FEATURE_PCLMULQDQ	(4*32+ 1) /* PCLMULQDQ instruction */
+#define X86_FEATURE_DTES64	(4*32+ 2) /* 64-bit Debug Store */
+#define X86_FEATURE_MWAIT	(4*32+ 3) /* "monitor" Monitor/Mwait support */
+#define X86_FEATURE_DSCPL	(4*32+ 4) /* "ds_cpl" CPL Qual. Debug Store */
+#define X86_FEATURE_VMX		(4*32+ 5) /* Hardware virtualization */
+#define X86_FEATURE_SMX		(4*32+ 6) /* Safer mode */
+#define X86_FEATURE_EST		(4*32+ 7) /* Enhanced SpeedStep */
+#define X86_FEATURE_TM2		(4*32+ 8) /* Thermal Monitor 2 */
+#define X86_FEATURE_SSSE3	(4*32+ 9) /* Supplemental SSE-3 */
+#define X86_FEATURE_CID		(4*32+10) /* Context ID */
+#define X86_FEATURE_FMA		(4*32+12) /* Fused multiply-add */
+#define X86_FEATURE_CX16	(4*32+13) /* CMPXCHG16B */
+#define X86_FEATURE_XTPR	(4*32+14) /* Send Task Priority Messages */
+#define X86_FEATURE_PDCM	(4*32+15) /* Performance Capabilities */
+#define X86_FEATURE_DCA		(4*32+18) /* Direct Cache Access */
+#define X86_FEATURE_XMM4_1	(4*32+19) /* "sse4_1" SSE-4.1 */
+#define X86_FEATURE_XMM4_2	(4*32+20) /* "sse4_2" SSE-4.2 */
+#define X86_FEATURE_X2APIC	(4*32+21) /* x2APIC */
+#define X86_FEATURE_AES		(4*32+25) /* AES instructions */
+#define X86_FEATURE_XSAVE	(4*32+26) /* XSAVE/XRSTOR/XSETBV/XGETBV */
+#define X86_FEATURE_OSXSAVE	(4*32+27) /* "" XSAVE enabled in the OS */
+#define X86_FEATURE_AVX		(4*32+28) /* Advanced Vector Extensions */
+
+/* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
+#define X86_FEATURE_XSTORE	(5*32+ 2) /* "rng" RNG present (xstore) */
+#define X86_FEATURE_XSTORE_EN	(5*32+ 3) /* "rng_en" RNG enabled */
+#define X86_FEATURE_XCRYPT	(5*32+ 6) /* "ace" on-CPU crypto (xcrypt) */
+#define X86_FEATURE_XCRYPT_EN	(5*32+ 7) /* "ace_en" on-CPU crypto enabled */
+#define X86_FEATURE_ACE2	(5*32+ 8) /* Advanced Cryptography Engine v2 */
+#define X86_FEATURE_ACE2_EN	(5*32+ 9) /* ACE v2 enabled */
+#define X86_FEATURE_PHE		(5*32+10) /* PadLock Hash Engine */
+#define X86_FEATURE_PHE_EN	(5*32+11) /* PHE enabled */
+#define X86_FEATURE_PMM		(5*32+12) /* PadLock Montgomery Multiplier */
+#define X86_FEATURE_PMM_EN	(5*32+13) /* PMM enabled */
+
+/* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */
+#define X86_FEATURE_LAHF_LM	(6*32+ 0) /* LAHF/SAHF in long mode */
+#define X86_FEATURE_CMP_LEGACY	(6*32+ 1) /* If yes HyperThreading not valid */
+#define X86_FEATURE_SVM		(6*32+ 2) /* Secure virtual machine */
+#define X86_FEATURE_EXTAPIC	(6*32+ 3) /* Extended APIC space */
+#define X86_FEATURE_CR8_LEGACY	(6*32+ 4) /* CR8 in 32-bit mode */
+#define X86_FEATURE_ABM		(6*32+ 5) /* Advanced bit manipulation */
+#define X86_FEATURE_SSE4A	(6*32+ 6) /* SSE-4A */
+#define X86_FEATURE_MISALIGNSSE (6*32+ 7) /* Misaligned SSE mode */
+#define X86_FEATURE_3DNOWPREFETCH (6*32+ 8) /* 3DNow prefetch instructions */
+#define X86_FEATURE_OSVW	(6*32+ 9) /* OS Visible Workaround */
+#define X86_FEATURE_IBS		(6*32+10) /* Instruction Based Sampling */
+#define X86_FEATURE_SSE5	(6*32+11) /* SSE-5 */
+#define X86_FEATURE_SKINIT	(6*32+12) /* SKINIT/STGI instructions */
+#define X86_FEATURE_WDT		(6*32+13) /* Watchdog timer */
+
+/*
+ * Auxiliary flags: Linux defined - For features scattered in various
+ * CPUID levels like 0x6, 0xA etc
+ */
+#define X86_FEATURE_IDA		(7*32+ 0) /* Intel Dynamic Acceleration */
+
+/* Virtualization flags: Linux defined */
+#define X86_FEATURE_TPR_SHADOW  (8*32+ 0) /* Intel TPR Shadow */
+#define X86_FEATURE_VNMI        (8*32+ 1) /* Intel Virtual NMI */
+#define X86_FEATURE_FLEXPRIORITY (8*32+ 2) /* Intel FlexPriority */
+#define X86_FEATURE_EPT         (8*32+ 3) /* Intel Extended Page Table */
+#define X86_FEATURE_VPID        (8*32+ 4) /* Intel Virtual Processor ID */
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+
+#include <linux/bitops.h>
+
+extern const char * const x86_cap_flags[NCAPINTS*32];
+extern const char * const x86_power_flags[32];
+
+#define test_cpu_cap(c, bit)						\
+	 test_bit(bit, (unsigned long *)((c)->x86_capability))
+
+#define cpu_has(c, bit)							\
+	(__builtin_constant_p(bit) &&					\
+	 ( (((bit)>>5)==0 && (1UL<<((bit)&31) & REQUIRED_MASK0)) ||	\
+	   (((bit)>>5)==1 && (1UL<<((bit)&31) & REQUIRED_MASK1)) ||	\
+	   (((bit)>>5)==2 && (1UL<<((bit)&31) & REQUIRED_MASK2)) ||	\
+	   (((bit)>>5)==3 && (1UL<<((bit)&31) & REQUIRED_MASK3)) ||	\
+	   (((bit)>>5)==4 && (1UL<<((bit)&31) & REQUIRED_MASK4)) ||	\
+	   (((bit)>>5)==5 && (1UL<<((bit)&31) & REQUIRED_MASK5)) ||	\
+	   (((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) ||	\
+	   (((bit)>>5)==7 && (1UL<<((bit)&31) & REQUIRED_MASK7)) )	\
+	  ? 1 :								\
+	 test_cpu_cap(c, bit))
+
+#define boot_cpu_has(bit)	cpu_has(&boot_cpu_data, bit)
+
+#define set_cpu_cap(c, bit)	set_bit(bit, (unsigned long *)((c)->x86_capability))
+#define clear_cpu_cap(c, bit)	clear_bit(bit, (unsigned long *)((c)->x86_capability))
+#define setup_clear_cpu_cap(bit) do { \
+	clear_cpu_cap(&boot_cpu_data, bit);	\
+	set_bit(bit, (unsigned long *)cleared_cpu_caps); \
+} while (0)
+#define setup_force_cpu_cap(bit) do { \
+	set_cpu_cap(&boot_cpu_data, bit);	\
+	clear_bit(bit, (unsigned long *)cleared_cpu_caps);	\
+} while (0)
+
+#define cpu_has_fpu		boot_cpu_has(X86_FEATURE_FPU)
+#define cpu_has_vme		boot_cpu_has(X86_FEATURE_VME)
+#define cpu_has_de		boot_cpu_has(X86_FEATURE_DE)
+#define cpu_has_pse		boot_cpu_has(X86_FEATURE_PSE)
+#define cpu_has_tsc		boot_cpu_has(X86_FEATURE_TSC)
+#define cpu_has_pae		boot_cpu_has(X86_FEATURE_PAE)
+#define cpu_has_pge		boot_cpu_has(X86_FEATURE_PGE)
+#define cpu_has_apic		boot_cpu_has(X86_FEATURE_APIC)
+#define cpu_has_sep		boot_cpu_has(X86_FEATURE_SEP)
+#define cpu_has_mtrr		boot_cpu_has(X86_FEATURE_MTRR)
+#define cpu_has_mmx		boot_cpu_has(X86_FEATURE_MMX)
+#define cpu_has_fxsr		boot_cpu_has(X86_FEATURE_FXSR)
+#define cpu_has_xmm		boot_cpu_has(X86_FEATURE_XMM)
+#define cpu_has_xmm2		boot_cpu_has(X86_FEATURE_XMM2)
+#define cpu_has_xmm3		boot_cpu_has(X86_FEATURE_XMM3)
+#define cpu_has_ht		boot_cpu_has(X86_FEATURE_HT)
+#define cpu_has_mp		boot_cpu_has(X86_FEATURE_MP)
+#define cpu_has_nx		boot_cpu_has(X86_FEATURE_NX)
+#define cpu_has_k6_mtrr		boot_cpu_has(X86_FEATURE_K6_MTRR)
+#define cpu_has_cyrix_arr	boot_cpu_has(X86_FEATURE_CYRIX_ARR)
+#define cpu_has_centaur_mcr	boot_cpu_has(X86_FEATURE_CENTAUR_MCR)
+#define cpu_has_xstore		boot_cpu_has(X86_FEATURE_XSTORE)
+#define cpu_has_xstore_enabled	boot_cpu_has(X86_FEATURE_XSTORE_EN)
+#define cpu_has_xcrypt		boot_cpu_has(X86_FEATURE_XCRYPT)
+#define cpu_has_xcrypt_enabled	boot_cpu_has(X86_FEATURE_XCRYPT_EN)
+#define cpu_has_ace2		boot_cpu_has(X86_FEATURE_ACE2)
+#define cpu_has_ace2_enabled	boot_cpu_has(X86_FEATURE_ACE2_EN)
+#define cpu_has_phe		boot_cpu_has(X86_FEATURE_PHE)
+#define cpu_has_phe_enabled	boot_cpu_has(X86_FEATURE_PHE_EN)
+#define cpu_has_pmm		boot_cpu_has(X86_FEATURE_PMM)
+#define cpu_has_pmm_enabled	boot_cpu_has(X86_FEATURE_PMM_EN)
+#define cpu_has_ds		boot_cpu_has(X86_FEATURE_DS)
+#define cpu_has_pebs		boot_cpu_has(X86_FEATURE_PEBS)
+#define cpu_has_clflush		boot_cpu_has(X86_FEATURE_CLFLSH)
+#define cpu_has_bts		boot_cpu_has(X86_FEATURE_BTS)
+#define cpu_has_gbpages		boot_cpu_has(X86_FEATURE_GBPAGES)
+#define cpu_has_arch_perfmon	boot_cpu_has(X86_FEATURE_ARCH_PERFMON)
+#define cpu_has_pat		boot_cpu_has(X86_FEATURE_PAT)
+#define cpu_has_xmm4_1		boot_cpu_has(X86_FEATURE_XMM4_1)
+#define cpu_has_xmm4_2		boot_cpu_has(X86_FEATURE_XMM4_2)
+#define cpu_has_x2apic		boot_cpu_has(X86_FEATURE_X2APIC)
+#define cpu_has_xsave		boot_cpu_has(X86_FEATURE_XSAVE)
+
+#if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64)
+# define cpu_has_invlpg		1
+#else
+# define cpu_has_invlpg		(boot_cpu_data.x86 > 3)
+#endif
+
+#ifdef CONFIG_X86_64
+
+#undef  cpu_has_vme
+#define cpu_has_vme		0
+
+#undef  cpu_has_pae
+#define cpu_has_pae		___BUG___
+
+#undef  cpu_has_mp
+#define cpu_has_mp		1
+
+#undef  cpu_has_k6_mtrr
+#define cpu_has_k6_mtrr		0
+
+#undef  cpu_has_cyrix_arr
+#define cpu_has_cyrix_arr	0
+
+#undef  cpu_has_centaur_mcr
+#define cpu_has_centaur_mcr	0
+
+#endif /* CONFIG_X86_64 */
+
+#endif /* defined(__KERNEL__) && !defined(__ASSEMBLY__) */
+
+#endif /* _ASM_X86_CPUFEATURE_H */
diff --git a/include/asm-x86/cputime.h b/arch/x86/include/asm/cputime.h
similarity index 100%
rename from include/asm-x86/cputime.h
rename to arch/x86/include/asm/cputime.h
diff --git a/arch/x86/include/asm/current.h b/arch/x86/include/asm/current.h
new file mode 100644
index 0000000..0930b4f
--- /dev/null
+++ b/arch/x86/include/asm/current.h
@@ -0,0 +1,39 @@
+#ifndef _ASM_X86_CURRENT_H
+#define _ASM_X86_CURRENT_H
+
+#ifdef CONFIG_X86_32
+#include <linux/compiler.h>
+#include <asm/percpu.h>
+
+struct task_struct;
+
+DECLARE_PER_CPU(struct task_struct *, current_task);
+static __always_inline struct task_struct *get_current(void)
+{
+	return x86_read_percpu(current_task);
+}
+
+#else /* X86_32 */
+
+#ifndef __ASSEMBLY__
+#include <asm/pda.h>
+
+struct task_struct;
+
+static __always_inline struct task_struct *get_current(void)
+{
+	return read_pda(pcurrent);
+}
+
+#else /* __ASSEMBLY__ */
+
+#include <asm/asm-offsets.h>
+#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* X86_32 */
+
+#define current get_current()
+
+#endif /* _ASM_X86_CURRENT_H */
diff --git a/arch/x86/include/asm/debugreg.h b/arch/x86/include/asm/debugreg.h
new file mode 100644
index 0000000..3ea6f37
--- /dev/null
+++ b/arch/x86/include/asm/debugreg.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_X86_DEBUGREG_H
+#define _ASM_X86_DEBUGREG_H
+
+
+/* Indicate the register numbers for a number of the specific
+   debug registers.  Registers 0-3 contain the addresses we wish to trap on */
+#define DR_FIRSTADDR 0        /* u_debugreg[DR_FIRSTADDR] */
+#define DR_LASTADDR 3         /* u_debugreg[DR_LASTADDR]  */
+
+#define DR_STATUS 6           /* u_debugreg[DR_STATUS]     */
+#define DR_CONTROL 7          /* u_debugreg[DR_CONTROL] */
+
+/* Define a few things for the status register.  We can use this to determine
+   which debugging register was responsible for the trap.  The other bits
+   are either reserved or not of interest to us. */
+
+#define DR_TRAP0	(0x1)		/* db0 */
+#define DR_TRAP1	(0x2)		/* db1 */
+#define DR_TRAP2	(0x4)		/* db2 */
+#define DR_TRAP3	(0x8)		/* db3 */
+
+#define DR_STEP		(0x4000)	/* single-step */
+#define DR_SWITCH	(0x8000)	/* task switch */
+
+/* Now define a bunch of things for manipulating the control register.
+   The top two bytes of the control register consist of 4 fields of 4
+   bits - each field corresponds to one of the four debug registers,
+   and indicates what types of access we trap on, and how large the data
+   field is that we are looking at */
+
+#define DR_CONTROL_SHIFT 16 /* Skip this many bits in ctl register */
+#define DR_CONTROL_SIZE 4   /* 4 control bits per register */
+
+#define DR_RW_EXECUTE (0x0)   /* Settings for the access types to trap on */
+#define DR_RW_WRITE (0x1)
+#define DR_RW_READ (0x3)
+
+#define DR_LEN_1 (0x0) /* Settings for data length to trap on */
+#define DR_LEN_2 (0x4)
+#define DR_LEN_4 (0xC)
+#define DR_LEN_8 (0x8)
+
+/* The low byte to the control register determine which registers are
+   enabled.  There are 4 fields of two bits.  One bit is "local", meaning
+   that the processor will reset the bit after a task switch and the other
+   is global meaning that we have to explicitly reset the bit.  With linux,
+   you can use either one, since we explicitly zero the register when we enter
+   kernel mode. */
+
+#define DR_LOCAL_ENABLE_SHIFT 0    /* Extra shift to the local enable bit */
+#define DR_GLOBAL_ENABLE_SHIFT 1   /* Extra shift to the global enable bit */
+#define DR_ENABLE_SIZE 2           /* 2 enable bits per register */
+
+#define DR_LOCAL_ENABLE_MASK (0x55)  /* Set  local bits for all 4 regs */
+#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */
+
+/* The second byte to the control register has a few special things.
+   We can slow the instruction pipeline for instructions coming via the
+   gdt or the ldt if we want to.  I am not sure why this is an advantage */
+
+#ifdef __i386__
+#define DR_CONTROL_RESERVED (0xFC00) /* Reserved by Intel */
+#else
+#define DR_CONTROL_RESERVED (0xFFFFFFFF0000FC00UL) /* Reserved */
+#endif
+
+#define DR_LOCAL_SLOWDOWN (0x100)   /* Local slow the pipeline */
+#define DR_GLOBAL_SLOWDOWN (0x200)  /* Global slow the pipeline */
+
+#endif /* _ASM_X86_DEBUGREG_H */
diff --git a/arch/x86/include/asm/delay.h b/arch/x86/include/asm/delay.h
new file mode 100644
index 0000000..409a649
--- /dev/null
+++ b/arch/x86/include/asm/delay.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_X86_DELAY_H
+#define _ASM_X86_DELAY_H
+
+/*
+ * Copyright (C) 1993 Linus Torvalds
+ *
+ * Delay routines calling functions in arch/x86/lib/delay.c
+ */
+
+/* Undefined functions to get compile-time errors */
+extern void __bad_udelay(void);
+extern void __bad_ndelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __ndelay(unsigned long nsecs);
+extern void __const_udelay(unsigned long xloops);
+extern void __delay(unsigned long loops);
+
+/* 0x10c7 is 2**32 / 1000000 (rounded up) */
+#define udelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c7ul)) : \
+	__udelay(n))
+
+/* 0x5 is 2**32 / 1000000000 (rounded up) */
+#define ndelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
+	__ndelay(n))
+
+void use_tsc_delay(void);
+
+#endif /* _ASM_X86_DELAY_H */
diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
new file mode 100644
index 0000000..e6b82b17
--- /dev/null
+++ b/arch/x86/include/asm/desc.h
@@ -0,0 +1,409 @@
+#ifndef _ASM_X86_DESC_H
+#define _ASM_X86_DESC_H
+
+#ifndef __ASSEMBLY__
+#include <asm/desc_defs.h>
+#include <asm/ldt.h>
+#include <asm/mmu.h>
+#include <linux/smp.h>
+
+static inline void fill_ldt(struct desc_struct *desc,
+			    const struct user_desc *info)
+{
+	desc->limit0 = info->limit & 0x0ffff;
+	desc->base0 = info->base_addr & 0x0000ffff;
+
+	desc->base1 = (info->base_addr & 0x00ff0000) >> 16;
+	desc->type = (info->read_exec_only ^ 1) << 1;
+	desc->type |= info->contents << 2;
+	desc->s = 1;
+	desc->dpl = 0x3;
+	desc->p = info->seg_not_present ^ 1;
+	desc->limit = (info->limit & 0xf0000) >> 16;
+	desc->avl = info->useable;
+	desc->d = info->seg_32bit;
+	desc->g = info->limit_in_pages;
+	desc->base2 = (info->base_addr & 0xff000000) >> 24;
+	/*
+	 * Don't allow setting of the lm bit. It is useless anyway
+	 * because 64bit system calls require __USER_CS:
+	 */
+	desc->l = 0;
+}
+
+extern struct desc_ptr idt_descr;
+extern gate_desc idt_table[];
+
+struct gdt_page {
+	struct desc_struct gdt[GDT_ENTRIES];
+} __attribute__((aligned(PAGE_SIZE)));
+DECLARE_PER_CPU(struct gdt_page, gdt_page);
+
+static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu)
+{
+	return per_cpu(gdt_page, cpu).gdt;
+}
+
+#ifdef CONFIG_X86_64
+
+static inline void pack_gate(gate_desc *gate, unsigned type, unsigned long func,
+			     unsigned dpl, unsigned ist, unsigned seg)
+{
+	gate->offset_low = PTR_LOW(func);
+	gate->segment = __KERNEL_CS;
+	gate->ist = ist;
+	gate->p = 1;
+	gate->dpl = dpl;
+	gate->zero0 = 0;
+	gate->zero1 = 0;
+	gate->type = type;
+	gate->offset_middle = PTR_MIDDLE(func);
+	gate->offset_high = PTR_HIGH(func);
+}
+
+#else
+static inline void pack_gate(gate_desc *gate, unsigned char type,
+			     unsigned long base, unsigned dpl, unsigned flags,
+			     unsigned short seg)
+{
+	gate->a = (seg << 16) | (base & 0xffff);
+	gate->b = (base & 0xffff0000) |
+		  (((0x80 | type | (dpl << 5)) & 0xff) << 8);
+}
+
+#endif
+
+static inline int desc_empty(const void *ptr)
+{
+	const u32 *desc = ptr;
+	return !(desc[0] | desc[1]);
+}
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define load_TR_desc() native_load_tr_desc()
+#define load_gdt(dtr) native_load_gdt(dtr)
+#define load_idt(dtr) native_load_idt(dtr)
+#define load_tr(tr) asm volatile("ltr %0"::"m" (tr))
+#define load_ldt(ldt) asm volatile("lldt %0"::"m" (ldt))
+
+#define store_gdt(dtr) native_store_gdt(dtr)
+#define store_idt(dtr) native_store_idt(dtr)
+#define store_tr(tr) (tr = native_store_tr())
+#define store_ldt(ldt) asm("sldt %0":"=m" (ldt))
+
+#define load_TLS(t, cpu) native_load_tls(t, cpu)
+#define set_ldt native_set_ldt
+
+#define write_ldt_entry(dt, entry, desc)	\
+	native_write_ldt_entry(dt, entry, desc)
+#define write_gdt_entry(dt, entry, desc, type)		\
+	native_write_gdt_entry(dt, entry, desc, type)
+#define write_idt_entry(dt, entry, g)		\
+	native_write_idt_entry(dt, entry, g)
+
+static inline void paravirt_alloc_ldt(struct desc_struct *ldt, unsigned entries)
+{
+}
+
+static inline void paravirt_free_ldt(struct desc_struct *ldt, unsigned entries)
+{
+}
+#endif	/* CONFIG_PARAVIRT */
+
+static inline void native_write_idt_entry(gate_desc *idt, int entry,
+					  const gate_desc *gate)
+{
+	memcpy(&idt[entry], gate, sizeof(*gate));
+}
+
+static inline void native_write_ldt_entry(struct desc_struct *ldt, int entry,
+					  const void *desc)
+{
+	memcpy(&ldt[entry], desc, 8);
+}
+
+static inline void native_write_gdt_entry(struct desc_struct *gdt, int entry,
+					  const void *desc, int type)
+{
+	unsigned int size;
+	switch (type) {
+	case DESC_TSS:
+		size = sizeof(tss_desc);
+		break;
+	case DESC_LDT:
+		size = sizeof(ldt_desc);
+		break;
+	default:
+		size = sizeof(struct desc_struct);
+		break;
+	}
+	memcpy(&gdt[entry], desc, size);
+}
+
+static inline void pack_descriptor(struct desc_struct *desc, unsigned long base,
+				   unsigned long limit, unsigned char type,
+				   unsigned char flags)
+{
+	desc->a = ((base & 0xffff) << 16) | (limit & 0xffff);
+	desc->b = (base & 0xff000000) | ((base & 0xff0000) >> 16) |
+		(limit & 0x000f0000) | ((type & 0xff) << 8) |
+		((flags & 0xf) << 20);
+	desc->p = 1;
+}
+
+
+static inline void set_tssldt_descriptor(void *d, unsigned long addr,
+					 unsigned type, unsigned size)
+{
+#ifdef CONFIG_X86_64
+	struct ldttss_desc64 *desc = d;
+	memset(desc, 0, sizeof(*desc));
+	desc->limit0 = size & 0xFFFF;
+	desc->base0 = PTR_LOW(addr);
+	desc->base1 = PTR_MIDDLE(addr) & 0xFF;
+	desc->type = type;
+	desc->p = 1;
+	desc->limit1 = (size >> 16) & 0xF;
+	desc->base2 = (PTR_MIDDLE(addr) >> 8) & 0xFF;
+	desc->base3 = PTR_HIGH(addr);
+#else
+	pack_descriptor((struct desc_struct *)d, addr, size, 0x80 | type, 0);
+#endif
+}
+
+static inline void __set_tss_desc(unsigned cpu, unsigned int entry, void *addr)
+{
+	struct desc_struct *d = get_cpu_gdt_table(cpu);
+	tss_desc tss;
+
+	/*
+	 * sizeof(unsigned long) coming from an extra "long" at the end
+	 * of the iobitmap. See tss_struct definition in processor.h
+	 *
+	 * -1? seg base+limit should be pointing to the address of the
+	 * last valid byte
+	 */
+	set_tssldt_descriptor(&tss, (unsigned long)addr, DESC_TSS,
+			      IO_BITMAP_OFFSET + IO_BITMAP_BYTES +
+			      sizeof(unsigned long) - 1);
+	write_gdt_entry(d, entry, &tss, DESC_TSS);
+}
+
+#define set_tss_desc(cpu, addr) __set_tss_desc(cpu, GDT_ENTRY_TSS, addr)
+
+static inline void native_set_ldt(const void *addr, unsigned int entries)
+{
+	if (likely(entries == 0))
+		asm volatile("lldt %w0"::"q" (0));
+	else {
+		unsigned cpu = smp_processor_id();
+		ldt_desc ldt;
+
+		set_tssldt_descriptor(&ldt, (unsigned long)addr, DESC_LDT,
+				      entries * LDT_ENTRY_SIZE - 1);
+		write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT,
+				&ldt, DESC_LDT);
+		asm volatile("lldt %w0"::"q" (GDT_ENTRY_LDT*8));
+	}
+}
+
+static inline void native_load_tr_desc(void)
+{
+	asm volatile("ltr %w0"::"q" (GDT_ENTRY_TSS*8));
+}
+
+static inline void native_load_gdt(const struct desc_ptr *dtr)
+{
+	asm volatile("lgdt %0"::"m" (*dtr));
+}
+
+static inline void native_load_idt(const struct desc_ptr *dtr)
+{
+	asm volatile("lidt %0"::"m" (*dtr));
+}
+
+static inline void native_store_gdt(struct desc_ptr *dtr)
+{
+	asm volatile("sgdt %0":"=m" (*dtr));
+}
+
+static inline void native_store_idt(struct desc_ptr *dtr)
+{
+	asm volatile("sidt %0":"=m" (*dtr));
+}
+
+static inline unsigned long native_store_tr(void)
+{
+	unsigned long tr;
+	asm volatile("str %0":"=r" (tr));
+	return tr;
+}
+
+static inline void native_load_tls(struct thread_struct *t, unsigned int cpu)
+{
+	unsigned int i;
+	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+
+	for (i = 0; i < GDT_ENTRY_TLS_ENTRIES; i++)
+		gdt[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i];
+}
+
+#define _LDT_empty(info)				\
+	((info)->base_addr		== 0	&&	\
+	 (info)->limit			== 0	&&	\
+	 (info)->contents		== 0	&&	\
+	 (info)->read_exec_only		== 1	&&	\
+	 (info)->seg_32bit		== 0	&&	\
+	 (info)->limit_in_pages		== 0	&&	\
+	 (info)->seg_not_present	== 1	&&	\
+	 (info)->useable		== 0)
+
+#ifdef CONFIG_X86_64
+#define LDT_empty(info) (_LDT_empty(info) && ((info)->lm == 0))
+#else
+#define LDT_empty(info) (_LDT_empty(info))
+#endif
+
+static inline void clear_LDT(void)
+{
+	set_ldt(NULL, 0);
+}
+
+/*
+ * load one particular LDT into the current CPU
+ */
+static inline void load_LDT_nolock(mm_context_t *pc)
+{
+	set_ldt(pc->ldt, pc->size);
+}
+
+static inline void load_LDT(mm_context_t *pc)
+{
+	preempt_disable();
+	load_LDT_nolock(pc);
+	preempt_enable();
+}
+
+static inline unsigned long get_desc_base(const struct desc_struct *desc)
+{
+	return desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24);
+}
+
+static inline unsigned long get_desc_limit(const struct desc_struct *desc)
+{
+	return desc->limit0 | (desc->limit << 16);
+}
+
+static inline void _set_gate(int gate, unsigned type, void *addr,
+			     unsigned dpl, unsigned ist, unsigned seg)
+{
+	gate_desc s;
+	pack_gate(&s, type, (unsigned long)addr, dpl, ist, seg);
+	/*
+	 * does not need to be atomic because it is only done once at
+	 * setup time
+	 */
+	write_idt_entry(idt_table, gate, &s);
+}
+
+/*
+ * This needs to use 'idt_table' rather than 'idt', and
+ * thus use the _nonmapped_ version of the IDT, as the
+ * Pentium F0 0F bugfix can have resulted in the mapped
+ * IDT being write-protected.
+ */
+static inline void set_intr_gate(unsigned int n, void *addr)
+{
+	BUG_ON((unsigned)n > 0xFF);
+	_set_gate(n, GATE_INTERRUPT, addr, 0, 0, __KERNEL_CS);
+}
+
+#define SYS_VECTOR_FREE		0
+#define SYS_VECTOR_ALLOCED	1
+
+extern int first_system_vector;
+extern char system_vectors[];
+
+static inline void alloc_system_vector(int vector)
+{
+	if (system_vectors[vector] == SYS_VECTOR_FREE) {
+		system_vectors[vector] = SYS_VECTOR_ALLOCED;
+		if (first_system_vector > vector)
+			first_system_vector = vector;
+	} else
+		BUG();
+}
+
+static inline void alloc_intr_gate(unsigned int n, void *addr)
+{
+	alloc_system_vector(n);
+	set_intr_gate(n, addr);
+}
+
+/*
+ * This routine sets up an interrupt gate at directory privilege level 3.
+ */
+static inline void set_system_intr_gate(unsigned int n, void *addr)
+{
+	BUG_ON((unsigned)n > 0xFF);
+	_set_gate(n, GATE_INTERRUPT, addr, 0x3, 0, __KERNEL_CS);
+}
+
+static inline void set_system_trap_gate(unsigned int n, void *addr)
+{
+	BUG_ON((unsigned)n > 0xFF);
+	_set_gate(n, GATE_TRAP, addr, 0x3, 0, __KERNEL_CS);
+}
+
+static inline void set_trap_gate(unsigned int n, void *addr)
+{
+	BUG_ON((unsigned)n > 0xFF);
+	_set_gate(n, GATE_TRAP, addr, 0, 0, __KERNEL_CS);
+}
+
+static inline void set_task_gate(unsigned int n, unsigned int gdt_entry)
+{
+	BUG_ON((unsigned)n > 0xFF);
+	_set_gate(n, GATE_TASK, (void *)0, 0, 0, (gdt_entry<<3));
+}
+
+static inline void set_intr_gate_ist(int n, void *addr, unsigned ist)
+{
+	BUG_ON((unsigned)n > 0xFF);
+	_set_gate(n, GATE_INTERRUPT, addr, 0, ist, __KERNEL_CS);
+}
+
+static inline void set_system_intr_gate_ist(int n, void *addr, unsigned ist)
+{
+	BUG_ON((unsigned)n > 0xFF);
+	_set_gate(n, GATE_INTERRUPT, addr, 0x3, ist, __KERNEL_CS);
+}
+
+#else
+/*
+ * GET_DESC_BASE reads the descriptor base of the specified segment.
+ *
+ * Args:
+ *    idx - descriptor index
+ *    gdt - GDT pointer
+ *    base - 32bit register to which the base will be written
+ *    lo_w - lo word of the "base" register
+ *    lo_b - lo byte of the "base" register
+ *    hi_b - hi byte of the low word of the "base" register
+ *
+ * Example:
+ *    GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah)
+ *    Will read the base address of GDT_ENTRY_ESPFIX_SS and put it into %eax.
+ */
+#define GET_DESC_BASE(idx, gdt, base, lo_w, lo_b, hi_b) \
+	movb idx * 8 + 4(gdt), lo_b;			\
+	movb idx * 8 + 7(gdt), hi_b;			\
+	shll $16, base;					\
+	movw idx * 8 + 2(gdt), lo_w;
+
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_DESC_H */
diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h
new file mode 100644
index 0000000..a6adefa
--- /dev/null
+++ b/arch/x86/include/asm/desc_defs.h
@@ -0,0 +1,95 @@
+/* Written 2000 by Andi Kleen */
+#ifndef _ASM_X86_DESC_DEFS_H
+#define _ASM_X86_DESC_DEFS_H
+
+/*
+ * Segment descriptor structure definitions, usable from both x86_64 and i386
+ * archs.
+ */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/*
+ * FIXME: Acessing the desc_struct through its fields is more elegant,
+ * and should be the one valid thing to do. However, a lot of open code
+ * still touches the a and b acessors, and doing this allow us to do it
+ * incrementally. We keep the signature as a struct, rather than an union,
+ * so we can get rid of it transparently in the future -- glommer
+ */
+/* 8 byte segment descriptor */
+struct desc_struct {
+	union {
+		struct {
+			unsigned int a;
+			unsigned int b;
+		};
+		struct {
+			u16 limit0;
+			u16 base0;
+			unsigned base1: 8, type: 4, s: 1, dpl: 2, p: 1;
+			unsigned limit: 4, avl: 1, l: 1, d: 1, g: 1, base2: 8;
+		};
+	};
+} __attribute__((packed));
+
+enum {
+	GATE_INTERRUPT = 0xE,
+	GATE_TRAP = 0xF,
+	GATE_CALL = 0xC,
+	GATE_TASK = 0x5,
+};
+
+/* 16byte gate */
+struct gate_struct64 {
+	u16 offset_low;
+	u16 segment;
+	unsigned ist : 3, zero0 : 5, type : 5, dpl : 2, p : 1;
+	u16 offset_middle;
+	u32 offset_high;
+	u32 zero1;
+} __attribute__((packed));
+
+#define PTR_LOW(x) ((unsigned long long)(x) & 0xFFFF)
+#define PTR_MIDDLE(x) (((unsigned long long)(x) >> 16) & 0xFFFF)
+#define PTR_HIGH(x) ((unsigned long long)(x) >> 32)
+
+enum {
+	DESC_TSS = 0x9,
+	DESC_LDT = 0x2,
+	DESCTYPE_S = 0x10,	/* !system */
+};
+
+/* LDT or TSS descriptor in the GDT. 16 bytes. */
+struct ldttss_desc64 {
+	u16 limit0;
+	u16 base0;
+	unsigned base1 : 8, type : 5, dpl : 2, p : 1;
+	unsigned limit1 : 4, zero0 : 3, g : 1, base2 : 8;
+	u32 base3;
+	u32 zero1;
+} __attribute__((packed));
+
+#ifdef CONFIG_X86_64
+typedef struct gate_struct64 gate_desc;
+typedef struct ldttss_desc64 ldt_desc;
+typedef struct ldttss_desc64 tss_desc;
+#define gate_offset(g) ((g).offset_low | ((unsigned long)(g).offset_middle << 16) | ((unsigned long)(g).offset_high << 32))
+#define gate_segment(g) ((g).segment)
+#else
+typedef struct desc_struct gate_desc;
+typedef struct desc_struct ldt_desc;
+typedef struct desc_struct tss_desc;
+#define gate_offset(g)		(((g).b & 0xffff0000) | ((g).a & 0x0000ffff))
+#define gate_segment(g)		((g).a >> 16)
+#endif
+
+struct desc_ptr {
+	unsigned short size;
+	unsigned long address;
+} __attribute__((packed)) ;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_X86_DESC_DEFS_H */
diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h
new file mode 100644
index 0000000..3c034f4
--- /dev/null
+++ b/arch/x86/include/asm/device.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_X86_DEVICE_H
+#define _ASM_X86_DEVICE_H
+
+struct dev_archdata {
+#ifdef CONFIG_ACPI
+	void	*acpi_handle;
+#endif
+#ifdef CONFIG_X86_64
+struct dma_mapping_ops *dma_ops;
+#endif
+#ifdef CONFIG_DMAR
+	void *iommu; /* hook for IOMMU specific extension */
+#endif
+};
+
+#endif /* _ASM_X86_DEVICE_H */
diff --git a/arch/x86/include/asm/div64.h b/arch/x86/include/asm/div64.h
new file mode 100644
index 0000000..9a2d644
--- /dev/null
+++ b/arch/x86/include/asm/div64.h
@@ -0,0 +1,60 @@
+#ifndef _ASM_X86_DIV64_H
+#define _ASM_X86_DIV64_H
+
+#ifdef CONFIG_X86_32
+
+#include <linux/types.h>
+
+/*
+ * do_div() is NOT a C function. It wants to return
+ * two values (the quotient and the remainder), but
+ * since that doesn't work very well in C, what it
+ * does is:
+ *
+ * - modifies the 64-bit dividend _in_place_
+ * - returns the 32-bit remainder
+ *
+ * This ends up being the most efficient "calling
+ * convention" on x86.
+ */
+#define do_div(n, base)						\
+({								\
+	unsigned long __upper, __low, __high, __mod, __base;	\
+	__base = (base);					\
+	asm("":"=a" (__low), "=d" (__high) : "A" (n));		\
+	__upper = __high;					\
+	if (__high) {						\
+		__upper = __high % (__base);			\
+		__high = __high / (__base);			\
+	}							\
+	asm("divl %2":"=a" (__low), "=d" (__mod)		\
+	    : "rm" (__base), "0" (__low), "1" (__upper));	\
+	asm("":"=A" (n) : "a" (__low), "d" (__high));		\
+	__mod;							\
+})
+
+static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
+{
+	union {
+		u64 v64;
+		u32 v32[2];
+	} d = { dividend };
+	u32 upper;
+
+	upper = d.v32[1];
+	d.v32[1] = 0;
+	if (upper >= divisor) {
+		d.v32[1] = upper / divisor;
+		upper %= divisor;
+	}
+	asm ("divl %2" : "=a" (d.v32[0]), "=d" (*remainder) :
+		"rm" (divisor), "0" (d.v32[0]), "1" (upper));
+	return d.v64;
+}
+#define div_u64_rem	div_u64_rem
+
+#else
+# include <asm-generic/div64.h>
+#endif /* CONFIG_X86_32 */
+
+#endif /* _ASM_X86_DIV64_H */
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
new file mode 100644
index 0000000..4a5397b
--- /dev/null
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -0,0 +1,308 @@
+#ifndef _ASM_X86_DMA_MAPPING_H
+#define _ASM_X86_DMA_MAPPING_H
+
+/*
+ * IOMMU interface. See Documentation/DMA-mapping.txt and DMA-API.txt for
+ * documentation.
+ */
+
+#include <linux/scatterlist.h>
+#include <asm/io.h>
+#include <asm/swiotlb.h>
+#include <asm-generic/dma-coherent.h>
+
+extern dma_addr_t bad_dma_address;
+extern int iommu_merge;
+extern struct device x86_dma_fallback_dev;
+extern int panic_on_overflow;
+
+struct dma_mapping_ops {
+	int             (*mapping_error)(struct device *dev,
+					 dma_addr_t dma_addr);
+	void*           (*alloc_coherent)(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t gfp);
+	void            (*free_coherent)(struct device *dev, size_t size,
+				void *vaddr, dma_addr_t dma_handle);
+	dma_addr_t      (*map_single)(struct device *hwdev, phys_addr_t ptr,
+				size_t size, int direction);
+	void            (*unmap_single)(struct device *dev, dma_addr_t addr,
+				size_t size, int direction);
+	void            (*sync_single_for_cpu)(struct device *hwdev,
+				dma_addr_t dma_handle, size_t size,
+				int direction);
+	void            (*sync_single_for_device)(struct device *hwdev,
+				dma_addr_t dma_handle, size_t size,
+				int direction);
+	void            (*sync_single_range_for_cpu)(struct device *hwdev,
+				dma_addr_t dma_handle, unsigned long offset,
+				size_t size, int direction);
+	void            (*sync_single_range_for_device)(struct device *hwdev,
+				dma_addr_t dma_handle, unsigned long offset,
+				size_t size, int direction);
+	void            (*sync_sg_for_cpu)(struct device *hwdev,
+				struct scatterlist *sg, int nelems,
+				int direction);
+	void            (*sync_sg_for_device)(struct device *hwdev,
+				struct scatterlist *sg, int nelems,
+				int direction);
+	int             (*map_sg)(struct device *hwdev, struct scatterlist *sg,
+				int nents, int direction);
+	void            (*unmap_sg)(struct device *hwdev,
+				struct scatterlist *sg, int nents,
+				int direction);
+	int             (*dma_supported)(struct device *hwdev, u64 mask);
+	int		is_phys;
+};
+
+extern struct dma_mapping_ops *dma_ops;
+
+static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
+{
+#ifdef CONFIG_X86_32
+	return dma_ops;
+#else
+	if (unlikely(!dev) || !dev->archdata.dma_ops)
+		return dma_ops;
+	else
+		return dev->archdata.dma_ops;
+#endif /* _ASM_X86_DMA_MAPPING_H */
+}
+
+/* Make sure we keep the same behaviour */
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+#ifdef CONFIG_X86_32
+	return 0;
+#else
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+	if (ops->mapping_error)
+		return ops->mapping_error(dev, dma_addr);
+
+	return (dma_addr == bad_dma_address);
+#endif
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h)	(1)
+
+extern int dma_supported(struct device *hwdev, u64 mask);
+extern int dma_set_mask(struct device *dev, u64 mask);
+
+extern void *dma_generic_alloc_coherent(struct device *dev, size_t size,
+					dma_addr_t *dma_addr, gfp_t flag);
+
+static inline dma_addr_t
+dma_map_single(struct device *hwdev, void *ptr, size_t size,
+	       int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	return ops->map_single(hwdev, virt_to_phys(ptr), size, direction);
+}
+
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t addr, size_t size,
+		 int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->unmap_single)
+		ops->unmap_single(dev, addr, size, direction);
+}
+
+static inline int
+dma_map_sg(struct device *hwdev, struct scatterlist *sg,
+	   int nents, int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	return ops->map_sg(hwdev, sg, nents, direction);
+}
+
+static inline void
+dma_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents,
+	     int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->unmap_sg)
+		ops->unmap_sg(hwdev, sg, nents, direction);
+}
+
+static inline void
+dma_sync_single_for_cpu(struct device *hwdev, dma_addr_t dma_handle,
+			size_t size, int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_single_for_cpu)
+		ops->sync_single_for_cpu(hwdev, dma_handle, size, direction);
+	flush_write_buffers();
+}
+
+static inline void
+dma_sync_single_for_device(struct device *hwdev, dma_addr_t dma_handle,
+			   size_t size, int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_single_for_device)
+		ops->sync_single_for_device(hwdev, dma_handle, size, direction);
+	flush_write_buffers();
+}
+
+static inline void
+dma_sync_single_range_for_cpu(struct device *hwdev, dma_addr_t dma_handle,
+			      unsigned long offset, size_t size, int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_single_range_for_cpu)
+		ops->sync_single_range_for_cpu(hwdev, dma_handle, offset,
+					       size, direction);
+	flush_write_buffers();
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *hwdev, dma_addr_t dma_handle,
+				 unsigned long offset, size_t size,
+				 int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_single_range_for_device)
+		ops->sync_single_range_for_device(hwdev, dma_handle,
+						  offset, size, direction);
+	flush_write_buffers();
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
+		    int nelems, int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_sg_for_cpu)
+		ops->sync_sg_for_cpu(hwdev, sg, nelems, direction);
+	flush_write_buffers();
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
+		       int nelems, int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_sg_for_device)
+		ops->sync_sg_for_device(hwdev, sg, nelems, direction);
+
+	flush_write_buffers();
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      size_t offset, size_t size,
+				      int direction)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(direction));
+	return ops->map_single(dev, page_to_phys(page) + offset,
+			       size, direction);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t addr,
+				  size_t size, int direction)
+{
+	dma_unmap_single(dev, addr, size, direction);
+}
+
+static inline void
+dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+	enum dma_data_direction dir)
+{
+	flush_write_buffers();
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	/* no easy way to get cache size on all x86, so return the
+	 * maximum possible, to be safe */
+	return boot_cpu_data.x86_clflush_size;
+}
+
+static inline unsigned long dma_alloc_coherent_mask(struct device *dev,
+						    gfp_t gfp)
+{
+	unsigned long dma_mask = 0;
+
+	dma_mask = dev->coherent_dma_mask;
+	if (!dma_mask)
+		dma_mask = (gfp & GFP_DMA) ? DMA_24BIT_MASK : DMA_32BIT_MASK;
+
+	return dma_mask;
+}
+
+static inline gfp_t dma_alloc_coherent_gfp_flags(struct device *dev, gfp_t gfp)
+{
+#ifdef CONFIG_X86_64
+	unsigned long dma_mask = dma_alloc_coherent_mask(dev, gfp);
+
+	if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA))
+		gfp |= GFP_DMA32;
+#endif
+       return gfp;
+}
+
+static inline void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		gfp_t gfp)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+	void *memory;
+
+	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
+
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &memory))
+		return memory;
+
+	if (!dev) {
+		dev = &x86_dma_fallback_dev;
+		gfp |= GFP_DMA;
+	}
+
+	if (!is_device_dma_capable(dev))
+		return NULL;
+
+	if (!ops->alloc_coherent)
+		return NULL;
+
+	return ops->alloc_coherent(dev, size, dma_handle,
+				   dma_alloc_coherent_gfp_flags(dev, gfp));
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *vaddr, dma_addr_t bus)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
+	WARN_ON(irqs_disabled());       /* for portability */
+
+	if (dma_release_from_coherent(dev, get_order(size), vaddr))
+		return;
+
+	if (ops->free_coherent)
+		ops->free_coherent(dev, size, vaddr, bus);
+}
+
+#endif
diff --git a/arch/x86/include/asm/dma.h b/arch/x86/include/asm/dma.h
new file mode 100644
index 0000000..ca1098a
--- /dev/null
+++ b/arch/x86/include/asm/dma.h
@@ -0,0 +1,318 @@
+/*
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ */
+
+#ifndef _ASM_X86_DMA_H
+#define _ASM_X86_DMA_H
+
+#include <linux/spinlock.h>	/* And spinlocks */
+#include <asm/io.h>		/* need byte IO */
+#include <linux/delay.h>
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb	outb_p
+#else
+#define dma_outb	outb
+#endif
+
+#define dma_inb		inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+#define MAX_DMA_CHANNELS	8
+
+#ifdef CONFIG_X86_32
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+#define MAX_DMA_ADDRESS      (PAGE_OFFSET + 0x1000000)
+
+#else
+
+/* 16MB ISA DMA zone */
+#define MAX_DMA_PFN   ((16 * 1024 * 1024) >> PAGE_SHIFT)
+
+/* 4GB broken PCI/AGP hardware bus master zone */
+#define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
+
+/* Compat define for old dma zone */
+#define MAX_DMA_ADDRESS ((unsigned long)__va(MAX_DMA_PFN << PAGE_SHIFT))
+
+#endif
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG		0x09    /* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG		0x0D    /* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
+#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG		0xD2    /* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG		0xDA    /* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
+#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
+
+#define DMA_ADDR_0		0x00    /* DMA address registers */
+#define DMA_ADDR_1		0x02
+#define DMA_ADDR_2		0x04
+#define DMA_ADDR_3		0x06
+#define DMA_ADDR_4		0xC0
+#define DMA_ADDR_5		0xC4
+#define DMA_ADDR_6		0xC8
+#define DMA_ADDR_7		0xCC
+
+#define DMA_CNT_0		0x01    /* DMA count registers */
+#define DMA_CNT_1		0x03
+#define DMA_CNT_2		0x05
+#define DMA_CNT_3		0x07
+#define DMA_CNT_4		0xC2
+#define DMA_CNT_5		0xC6
+#define DMA_CNT_6		0xCA
+#define DMA_CNT_7		0xCE
+
+#define DMA_PAGE_0		0x87    /* DMA page registers */
+#define DMA_PAGE_1		0x83
+#define DMA_PAGE_2		0x81
+#define DMA_PAGE_3		0x82
+#define DMA_PAGE_5		0x8B
+#define DMA_PAGE_6		0x89
+#define DMA_PAGE_7		0x8A
+
+/* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_READ		0x44
+/* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE		0x48
+/* pass thru DREQ->HRQ, DACK<-HLDA only */
+#define DMA_MODE_CASCADE	0xC0
+
+#define DMA_AUTOINIT		0x10
+
+
+extern spinlock_t  dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static inline void enable_dma(unsigned int dmanr)
+{
+	if (dmanr <= 3)
+		dma_outb(dmanr, DMA1_MASK_REG);
+	else
+		dma_outb(dmanr & 3, DMA2_MASK_REG);
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+	if (dmanr <= 3)
+		dma_outb(dmanr | 4, DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static inline void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr <= 3)
+		dma_outb(0, DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0, DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static inline void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr <= 3)
+		dma_outb(mode | dmanr, DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr & 3), DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
+{
+	switch (dmanr) {
+	case 0:
+		dma_outb(pagenr, DMA_PAGE_0);
+		break;
+	case 1:
+		dma_outb(pagenr, DMA_PAGE_1);
+		break;
+	case 2:
+		dma_outb(pagenr, DMA_PAGE_2);
+		break;
+	case 3:
+		dma_outb(pagenr, DMA_PAGE_3);
+		break;
+	case 5:
+		dma_outb(pagenr & 0xfe, DMA_PAGE_5);
+		break;
+	case 6:
+		dma_outb(pagenr & 0xfe, DMA_PAGE_6);
+		break;
+	case 7:
+		dma_outb(pagenr & 0xfe, DMA_PAGE_7);
+		break;
+	}
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static inline void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+	set_dma_page(dmanr, a>>16);
+	if (dmanr <= 3)  {
+		dma_outb(a & 0xff, ((dmanr & 3) << 1) + IO_DMA1_BASE);
+		dma_outb((a >> 8) & 0xff, ((dmanr & 3) << 1) + IO_DMA1_BASE);
+	}  else  {
+		dma_outb((a >> 1) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
+		dma_outb((a >> 9) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
+	}
+}
+
+
+/* Set transfer size (max 64k for DMA0..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	count--;
+	if (dmanr <= 3)  {
+		dma_outb(count & 0xff, ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
+		dma_outb((count >> 8) & 0xff,
+			 ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
+	} else {
+		dma_outb((count >> 1) & 0xff,
+			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+		dma_outb((count >> 9) & 0xff,
+			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+	}
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static inline int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port;
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	io_port = (dmanr <= 3) ? ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE
+		: ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+
+	return (dmanr <= 3) ? count : (count << 1);
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+extern void free_dma(unsigned int dmanr);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+#endif /* _ASM_X86_DMA_H */
diff --git a/arch/x86/include/asm/dmi.h b/arch/x86/include/asm/dmi.h
new file mode 100644
index 0000000..bc68212
--- /dev/null
+++ b/arch/x86/include/asm/dmi.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_X86_DMI_H
+#define _ASM_X86_DMI_H
+
+#include <asm/io.h>
+
+#define DMI_MAX_DATA 2048
+
+extern int dmi_alloc_index;
+extern char dmi_alloc_data[DMI_MAX_DATA];
+
+/* This is so early that there is no good way to allocate dynamic memory.
+   Allocate data in an BSS array. */
+static inline void *dmi_alloc(unsigned len)
+{
+	int idx = dmi_alloc_index;
+	if ((dmi_alloc_index + len) > DMI_MAX_DATA)
+		return NULL;
+	dmi_alloc_index += len;
+	return dmi_alloc_data + idx;
+}
+
+/* Use early IO mappings for DMI because it's initialized early */
+#define dmi_ioremap early_ioremap
+#define dmi_iounmap early_iounmap
+
+#endif /* _ASM_X86_DMI_H */
diff --git a/arch/x86/include/asm/ds.h b/arch/x86/include/asm/ds.h
new file mode 100644
index 0000000..72c5a19
--- /dev/null
+++ b/arch/x86/include/asm/ds.h
@@ -0,0 +1,238 @@
+/*
+ * Debug Store (DS) support
+ *
+ * This provides a low-level interface to the hardware's Debug Store
+ * feature that is used for branch trace store (BTS) and
+ * precise-event based sampling (PEBS).
+ *
+ * It manages:
+ * - per-thread and per-cpu allocation of BTS and PEBS
+ * - buffer memory allocation (optional)
+ * - buffer overflow handling
+ * - buffer access
+ *
+ * It assumes:
+ * - get_task_struct on all parameter tasks
+ * - current is allowed to trace parameter tasks
+ *
+ *
+ * Copyright (C) 2007-2008 Intel Corporation.
+ * Markus Metzger <markus.t.metzger@intel.com>, 2007-2008
+ */
+
+#ifndef _ASM_X86_DS_H
+#define _ASM_X86_DS_H
+
+#ifdef CONFIG_X86_DS
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+
+struct task_struct;
+
+/*
+ * Request BTS or PEBS
+ *
+ * Due to alignement constraints, the actual buffer may be slightly
+ * smaller than the requested or provided buffer.
+ *
+ * Returns 0 on success; -Eerrno otherwise
+ *
+ * task: the task to request recording for;
+ *       NULL for per-cpu recording on the current cpu
+ * base: the base pointer for the (non-pageable) buffer;
+ *       NULL if buffer allocation requested
+ * size: the size of the requested or provided buffer
+ * ovfl: pointer to a function to be called on buffer overflow;
+ *       NULL if cyclic buffer requested
+ */
+typedef void (*ds_ovfl_callback_t)(struct task_struct *);
+extern int ds_request_bts(struct task_struct *task, void *base, size_t size,
+			  ds_ovfl_callback_t ovfl);
+extern int ds_request_pebs(struct task_struct *task, void *base, size_t size,
+			   ds_ovfl_callback_t ovfl);
+
+/*
+ * Release BTS or PEBS resources
+ *
+ * Frees buffers allocated on ds_request.
+ *
+ * Returns 0 on success; -Eerrno otherwise
+ *
+ * task: the task to release resources for;
+ *       NULL to release resources for the current cpu
+ */
+extern int ds_release_bts(struct task_struct *task);
+extern int ds_release_pebs(struct task_struct *task);
+
+/*
+ * Return the (array) index of the write pointer.
+ * (assuming an array of BTS/PEBS records)
+ *
+ * Returns -Eerrno on error
+ *
+ * task: the task to access;
+ *       NULL to access the current cpu
+ * pos (out): if not NULL, will hold the result
+ */
+extern int ds_get_bts_index(struct task_struct *task, size_t *pos);
+extern int ds_get_pebs_index(struct task_struct *task, size_t *pos);
+
+/*
+ * Return the (array) index one record beyond the end of the array.
+ * (assuming an array of BTS/PEBS records)
+ *
+ * Returns -Eerrno on error
+ *
+ * task: the task to access;
+ *       NULL to access the current cpu
+ * pos (out): if not NULL, will hold the result
+ */
+extern int ds_get_bts_end(struct task_struct *task, size_t *pos);
+extern int ds_get_pebs_end(struct task_struct *task, size_t *pos);
+
+/*
+ * Provide a pointer to the BTS/PEBS record at parameter index.
+ * (assuming an array of BTS/PEBS records)
+ *
+ * The pointer points directly into the buffer. The user is
+ * responsible for copying the record.
+ *
+ * Returns the size of a single record on success; -Eerrno on error
+ *
+ * task: the task to access;
+ *       NULL to access the current cpu
+ * index: the index of the requested record
+ * record (out): pointer to the requested record
+ */
+extern int ds_access_bts(struct task_struct *task,
+			 size_t index, const void **record);
+extern int ds_access_pebs(struct task_struct *task,
+			  size_t index, const void **record);
+
+/*
+ * Write one or more BTS/PEBS records at the write pointer index and
+ * advance the write pointer.
+ *
+ * If size is not a multiple of the record size, trailing bytes are
+ * zeroed out.
+ *
+ * May result in one or more overflow notifications.
+ *
+ * If called during overflow handling, that is, with index >=
+ * interrupt threshold, the write will wrap around.
+ *
+ * An overflow notification is given if and when the interrupt
+ * threshold is reached during or after the write.
+ *
+ * Returns the number of bytes written or -Eerrno.
+ *
+ * task: the task to access;
+ *       NULL to access the current cpu
+ * buffer: the buffer to write
+ * size: the size of the buffer
+ */
+extern int ds_write_bts(struct task_struct *task,
+			const void *buffer, size_t size);
+extern int ds_write_pebs(struct task_struct *task,
+			 const void *buffer, size_t size);
+
+/*
+ * Same as ds_write_bts/pebs, but omit ownership checks.
+ *
+ * This is needed to have some other task than the owner of the
+ * BTS/PEBS buffer or the parameter task itself write into the
+ * respective buffer.
+ */
+extern int ds_unchecked_write_bts(struct task_struct *task,
+				  const void *buffer, size_t size);
+extern int ds_unchecked_write_pebs(struct task_struct *task,
+				   const void *buffer, size_t size);
+
+/*
+ * Reset the write pointer of the BTS/PEBS buffer.
+ *
+ * Returns 0 on success; -Eerrno on error
+ *
+ * task: the task to access;
+ *       NULL to access the current cpu
+ */
+extern int ds_reset_bts(struct task_struct *task);
+extern int ds_reset_pebs(struct task_struct *task);
+
+/*
+ * Clear the BTS/PEBS buffer and reset the write pointer.
+ * The entire buffer will be zeroed out.
+ *
+ * Returns 0 on success; -Eerrno on error
+ *
+ * task: the task to access;
+ *       NULL to access the current cpu
+ */
+extern int ds_clear_bts(struct task_struct *task);
+extern int ds_clear_pebs(struct task_struct *task);
+
+/*
+ * Provide the PEBS counter reset value.
+ *
+ * Returns 0 on success; -Eerrno on error
+ *
+ * task: the task to access;
+ *       NULL to access the current cpu
+ * value (out): the counter reset value
+ */
+extern int ds_get_pebs_reset(struct task_struct *task, u64 *value);
+
+/*
+ * Set the PEBS counter reset value.
+ *
+ * Returns 0 on success; -Eerrno on error
+ *
+ * task: the task to access;
+ *       NULL to access the current cpu
+ * value: the new counter reset value
+ */
+extern int ds_set_pebs_reset(struct task_struct *task, u64 value);
+
+/*
+ * Initialization
+ */
+struct cpuinfo_x86;
+extern void __cpuinit ds_init_intel(struct cpuinfo_x86 *);
+
+
+
+/*
+ * The DS context - part of struct thread_struct.
+ */
+struct ds_context {
+	/* pointer to the DS configuration; goes into MSR_IA32_DS_AREA */
+	unsigned char *ds;
+	/* the owner of the BTS and PEBS configuration, respectively */
+	struct task_struct *owner[2];
+	/* buffer overflow notification function for BTS and PEBS */
+	ds_ovfl_callback_t callback[2];
+	/* the original buffer address */
+	void *buffer[2];
+	/* the number of allocated pages for on-request allocated buffers */
+	unsigned int pages[2];
+	/* use count */
+	unsigned long count;
+	/* a pointer to the context location inside the thread_struct
+	 * or the per_cpu context array */
+	struct ds_context **this;
+	/* a pointer to the task owning this context, or NULL, if the
+	 * context is owned by a cpu */
+	struct task_struct *task;
+};
+
+/* called by exit_thread() to free leftover contexts */
+extern void ds_free(struct ds_context *context);
+
+#else /* CONFIG_X86_DS */
+
+#define ds_init_intel(config) do {} while (0)
+
+#endif /* CONFIG_X86_DS */
+#endif /* _ASM_X86_DS_H */
diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h
new file mode 100644
index 0000000..804b6e6
--- /dev/null
+++ b/arch/x86/include/asm/dwarf2.h
@@ -0,0 +1,61 @@
+#ifndef _ASM_X86_DWARF2_H
+#define _ASM_X86_DWARF2_H
+
+#ifndef __ASSEMBLY__
+#warning "asm/dwarf2.h should be only included in pure assembly files"
+#endif
+
+/*
+   Macros for dwarf2 CFI unwind table entries.
+   See "as.info" for details on these pseudo ops. Unfortunately
+   they are only supported in very new binutils, so define them
+   away for older version.
+ */
+
+#ifdef CONFIG_AS_CFI
+
+#define CFI_STARTPROC .cfi_startproc
+#define CFI_ENDPROC .cfi_endproc
+#define CFI_DEF_CFA .cfi_def_cfa
+#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register
+#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset
+#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset
+#define CFI_OFFSET .cfi_offset
+#define CFI_REL_OFFSET .cfi_rel_offset
+#define CFI_REGISTER .cfi_register
+#define CFI_RESTORE .cfi_restore
+#define CFI_REMEMBER_STATE .cfi_remember_state
+#define CFI_RESTORE_STATE .cfi_restore_state
+#define CFI_UNDEFINED .cfi_undefined
+
+#ifdef CONFIG_AS_CFI_SIGNAL_FRAME
+#define CFI_SIGNAL_FRAME .cfi_signal_frame
+#else
+#define CFI_SIGNAL_FRAME
+#endif
+
+#else
+
+/* Due to the structure of pre-exisiting code, don't use assembler line
+   comment character # to ignore the arguments. Instead, use a dummy macro. */
+.macro cfi_ignore a=0, b=0, c=0, d=0
+.endm
+
+#define CFI_STARTPROC	cfi_ignore
+#define CFI_ENDPROC	cfi_ignore
+#define CFI_DEF_CFA	cfi_ignore
+#define CFI_DEF_CFA_REGISTER	cfi_ignore
+#define CFI_DEF_CFA_OFFSET	cfi_ignore
+#define CFI_ADJUST_CFA_OFFSET	cfi_ignore
+#define CFI_OFFSET	cfi_ignore
+#define CFI_REL_OFFSET	cfi_ignore
+#define CFI_REGISTER	cfi_ignore
+#define CFI_RESTORE	cfi_ignore
+#define CFI_REMEMBER_STATE cfi_ignore
+#define CFI_RESTORE_STATE cfi_ignore
+#define CFI_UNDEFINED cfi_ignore
+#define CFI_SIGNAL_FRAME cfi_ignore
+
+#endif
+
+#endif /* _ASM_X86_DWARF2_H */
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
new file mode 100644
index 0000000..3d8cedd
--- /dev/null
+++ b/arch/x86/include/asm/e820.h
@@ -0,0 +1,146 @@
+#ifndef _ASM_X86_E820_H
+#define _ASM_X86_E820_H
+#define E820MAP	0x2d0		/* our map */
+#define E820MAX	128		/* number of entries in E820MAP */
+
+/*
+ * Legacy E820 BIOS limits us to 128 (E820MAX) nodes due to the
+ * constrained space in the zeropage.  If we have more nodes than
+ * that, and if we've booted off EFI firmware, then the EFI tables
+ * passed us from the EFI firmware can list more nodes.  Size our
+ * internal memory map tables to have room for these additional
+ * nodes, based on up to three entries per node for which the
+ * kernel was built: MAX_NUMNODES == (1 << CONFIG_NODES_SHIFT),
+ * plus E820MAX, allowing space for the possible duplicate E820
+ * entries that might need room in the same arrays, prior to the
+ * call to sanitize_e820_map() to remove duplicates.  The allowance
+ * of three memory map entries per node is "enough" entries for
+ * the initial hardware platform motivating this mechanism to make
+ * use of additional EFI map entries.  Future platforms may want
+ * to allow more than three entries per node or otherwise refine
+ * this size.
+ */
+
+/*
+ * Odd: 'make headers_check' complains about numa.h if I try
+ * to collapse the next two #ifdef lines to a single line:
+ *	#if defined(__KERNEL__) && defined(CONFIG_EFI)
+ */
+#ifdef __KERNEL__
+#ifdef CONFIG_EFI
+#include <linux/numa.h>
+#define E820_X_MAX (E820MAX + 3 * MAX_NUMNODES)
+#else	/* ! CONFIG_EFI */
+#define E820_X_MAX E820MAX
+#endif
+#else	/* ! __KERNEL__ */
+#define E820_X_MAX E820MAX
+#endif
+
+#define E820NR	0x1e8		/* # entries in E820MAP */
+
+#define E820_RAM	1
+#define E820_RESERVED	2
+#define E820_ACPI	3
+#define E820_NVS	4
+#define E820_UNUSABLE	5
+
+/* reserved RAM used by kernel itself */
+#define E820_RESERVED_KERN        128
+
+#ifndef __ASSEMBLY__
+struct e820entry {
+	__u64 addr;	/* start of memory segment */
+	__u64 size;	/* size of memory segment */
+	__u32 type;	/* type of memory segment */
+} __attribute__((packed));
+
+struct e820map {
+	__u32 nr_map;
+	struct e820entry map[E820_X_MAX];
+};
+
+#ifdef __KERNEL__
+/* see comment in arch/x86/kernel/e820.c */
+extern struct e820map e820;
+extern struct e820map e820_saved;
+
+extern unsigned long pci_mem_start;
+extern int e820_any_mapped(u64 start, u64 end, unsigned type);
+extern int e820_all_mapped(u64 start, u64 end, unsigned type);
+extern void e820_add_region(u64 start, u64 size, int type);
+extern void e820_print_map(char *who);
+extern int
+sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, int *pnr_map);
+extern u64 e820_update_range(u64 start, u64 size, unsigned old_type,
+			       unsigned new_type);
+extern u64 e820_remove_range(u64 start, u64 size, unsigned old_type,
+			     int checktype);
+extern void update_e820(void);
+extern void e820_setup_gap(void);
+extern int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
+			unsigned long start_addr, unsigned long long end_addr);
+struct setup_data;
+extern void parse_e820_ext(struct setup_data *data, unsigned long pa_data);
+
+#if defined(CONFIG_X86_64) || \
+	(defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION))
+extern void e820_mark_nosave_regions(unsigned long limit_pfn);
+#else
+static inline void e820_mark_nosave_regions(unsigned long limit_pfn)
+{
+}
+#endif
+
+#ifdef CONFIG_MEMTEST
+extern void early_memtest(unsigned long start, unsigned long end);
+#else
+static inline void early_memtest(unsigned long start, unsigned long end)
+{
+}
+#endif
+
+extern unsigned long end_user_pfn;
+
+extern u64 find_e820_area(u64 start, u64 end, u64 size, u64 align);
+extern u64 find_e820_area_size(u64 start, u64 *sizep, u64 align);
+extern void reserve_early(u64 start, u64 end, char *name);
+extern void reserve_early_overlap_ok(u64 start, u64 end, char *name);
+extern void free_early(u64 start, u64 end);
+extern void early_res_to_bootmem(u64 start, u64 end);
+extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);
+
+extern unsigned long e820_end_of_ram_pfn(void);
+extern unsigned long e820_end_of_low_ram_pfn(void);
+extern int e820_find_active_region(const struct e820entry *ei,
+				  unsigned long start_pfn,
+				  unsigned long last_pfn,
+				  unsigned long *ei_startpfn,
+				  unsigned long *ei_endpfn);
+extern void e820_register_active_regions(int nid, unsigned long start_pfn,
+					 unsigned long end_pfn);
+extern u64 e820_hole_size(u64 start, u64 end);
+extern void finish_e820_parsing(void);
+extern void e820_reserve_resources(void);
+extern void e820_reserve_resources_late(void);
+extern void setup_memory_map(void);
+extern char *default_machine_specific_memory_setup(void);
+extern char *machine_specific_memory_setup(void);
+extern char *memory_setup(void);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+
+#define ISA_START_ADDRESS	0xa0000
+#define ISA_END_ADDRESS		0x100000
+#define is_ISA_range(s, e) ((s) >= ISA_START_ADDRESS && (e) < ISA_END_ADDRESS)
+
+#define BIOS_BEGIN		0x000a0000
+#define BIOS_END		0x00100000
+
+#ifdef __KERNEL__
+#include <linux/ioport.h>
+
+#define HIGH_MEMORY	(1024*1024)
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_E820_H */
diff --git a/arch/x86/include/asm/edac.h b/arch/x86/include/asm/edac.h
new file mode 100644
index 0000000..e9b57ec
--- /dev/null
+++ b/arch/x86/include/asm/edac.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_X86_EDAC_H
+#define _ASM_X86_EDAC_H
+
+/* ECC atomic, DMA, SMP and interrupt safe scrub function */
+
+static inline void atomic_scrub(void *va, u32 size)
+{
+	u32 i, *virt_addr = va;
+
+	/*
+	 * Very carefully read and write to memory atomically so we
+	 * are interrupt, DMA and SMP safe.
+	 */
+	for (i = 0; i < size / 4; i++, virt_addr++)
+		asm volatile("lock; addl $0, %0"::"m" (*virt_addr));
+}
+
+#endif /* _ASM_X86_EDAC_H */
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
new file mode 100644
index 0000000..a2e545c
--- /dev/null
+++ b/arch/x86/include/asm/efi.h
@@ -0,0 +1,110 @@
+#ifndef _ASM_X86_EFI_H
+#define _ASM_X86_EFI_H
+
+#ifdef CONFIG_X86_32
+
+extern unsigned long asmlinkage efi_call_phys(void *, ...);
+
+#define efi_call_phys0(f)		efi_call_phys(f)
+#define efi_call_phys1(f, a1)		efi_call_phys(f, a1)
+#define efi_call_phys2(f, a1, a2)	efi_call_phys(f, a1, a2)
+#define efi_call_phys3(f, a1, a2, a3)	efi_call_phys(f, a1, a2, a3)
+#define efi_call_phys4(f, a1, a2, a3, a4)	\
+	efi_call_phys(f, a1, a2, a3, a4)
+#define efi_call_phys5(f, a1, a2, a3, a4, a5)	\
+	efi_call_phys(f, a1, a2, a3, a4, a5)
+#define efi_call_phys6(f, a1, a2, a3, a4, a5, a6)	\
+	efi_call_phys(f, a1, a2, a3, a4, a5, a6)
+/*
+ * Wrap all the virtual calls in a way that forces the parameters on the stack.
+ */
+
+#define efi_call_virt(f, args...) \
+	((efi_##f##_t __attribute__((regparm(0)))*)efi.systab->runtime->f)(args)
+
+#define efi_call_virt0(f)		efi_call_virt(f)
+#define efi_call_virt1(f, a1)		efi_call_virt(f, a1)
+#define efi_call_virt2(f, a1, a2)	efi_call_virt(f, a1, a2)
+#define efi_call_virt3(f, a1, a2, a3)	efi_call_virt(f, a1, a2, a3)
+#define efi_call_virt4(f, a1, a2, a3, a4)	\
+	efi_call_virt(f, a1, a2, a3, a4)
+#define efi_call_virt5(f, a1, a2, a3, a4, a5)	\
+	efi_call_virt(f, a1, a2, a3, a4, a5)
+#define efi_call_virt6(f, a1, a2, a3, a4, a5, a6)	\
+	efi_call_virt(f, a1, a2, a3, a4, a5, a6)
+
+#define efi_ioremap(addr, size)			ioremap_cache(addr, size)
+
+#else /* !CONFIG_X86_32 */
+
+#define MAX_EFI_IO_PAGES	100
+
+extern u64 efi_call0(void *fp);
+extern u64 efi_call1(void *fp, u64 arg1);
+extern u64 efi_call2(void *fp, u64 arg1, u64 arg2);
+extern u64 efi_call3(void *fp, u64 arg1, u64 arg2, u64 arg3);
+extern u64 efi_call4(void *fp, u64 arg1, u64 arg2, u64 arg3, u64 arg4);
+extern u64 efi_call5(void *fp, u64 arg1, u64 arg2, u64 arg3,
+		     u64 arg4, u64 arg5);
+extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3,
+		     u64 arg4, u64 arg5, u64 arg6);
+
+#define efi_call_phys0(f)			\
+	efi_call0((void *)(f))
+#define efi_call_phys1(f, a1)			\
+	efi_call1((void *)(f), (u64)(a1))
+#define efi_call_phys2(f, a1, a2)			\
+	efi_call2((void *)(f), (u64)(a1), (u64)(a2))
+#define efi_call_phys3(f, a1, a2, a3)				\
+	efi_call3((void *)(f), (u64)(a1), (u64)(a2), (u64)(a3))
+#define efi_call_phys4(f, a1, a2, a3, a4)				\
+	efi_call4((void *)(f), (u64)(a1), (u64)(a2), (u64)(a3),		\
+		  (u64)(a4))
+#define efi_call_phys5(f, a1, a2, a3, a4, a5)				\
+	efi_call5((void *)(f), (u64)(a1), (u64)(a2), (u64)(a3),		\
+		  (u64)(a4), (u64)(a5))
+#define efi_call_phys6(f, a1, a2, a3, a4, a5, a6)			\
+	efi_call6((void *)(f), (u64)(a1), (u64)(a2), (u64)(a3),		\
+		  (u64)(a4), (u64)(a5), (u64)(a6))
+
+#define efi_call_virt0(f)				\
+	efi_call0((void *)(efi.systab->runtime->f))
+#define efi_call_virt1(f, a1)					\
+	efi_call1((void *)(efi.systab->runtime->f), (u64)(a1))
+#define efi_call_virt2(f, a1, a2)					\
+	efi_call2((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2))
+#define efi_call_virt3(f, a1, a2, a3)					\
+	efi_call3((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
+		  (u64)(a3))
+#define efi_call_virt4(f, a1, a2, a3, a4)				\
+	efi_call4((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
+		  (u64)(a3), (u64)(a4))
+#define efi_call_virt5(f, a1, a2, a3, a4, a5)				\
+	efi_call5((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
+		  (u64)(a3), (u64)(a4), (u64)(a5))
+#define efi_call_virt6(f, a1, a2, a3, a4, a5, a6)			\
+	efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
+		  (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6))
+
+extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size);
+
+#endif /* CONFIG_X86_32 */
+
+extern void efi_reserve_early(void);
+extern void efi_call_phys_prelog(void);
+extern void efi_call_phys_epilog(void);
+
+#ifndef CONFIG_EFI
+/*
+ * IF EFI is not configured, have the EFI calls return -ENOSYS.
+ */
+#define efi_call0(_f)					(-ENOSYS)
+#define efi_call1(_f, _a1)				(-ENOSYS)
+#define efi_call2(_f, _a1, _a2)				(-ENOSYS)
+#define efi_call3(_f, _a1, _a2, _a3)			(-ENOSYS)
+#define efi_call4(_f, _a1, _a2, _a3, _a4)		(-ENOSYS)
+#define efi_call5(_f, _a1, _a2, _a3, _a4, _a5)		(-ENOSYS)
+#define efi_call6(_f, _a1, _a2, _a3, _a4, _a5, _a6)	(-ENOSYS)
+#endif /* CONFIG_EFI */
+
+#endif /* _ASM_X86_EFI_H */
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
new file mode 100644
index 0000000..40ca1be
--- /dev/null
+++ b/arch/x86/include/asm/elf.h
@@ -0,0 +1,336 @@
+#ifndef _ASM_X86_ELF_H
+#define _ASM_X86_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+#include <asm/auxvec.h>
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_i387_struct elf_fpregset_t;
+
+#ifdef __i386__
+
+typedef struct user_fxsr_struct elf_fpxregset_t;
+
+#define R_386_NONE	0
+#define R_386_32	1
+#define R_386_PC32	2
+#define R_386_GOT32	3
+#define R_386_PLT32	4
+#define R_386_COPY	5
+#define R_386_GLOB_DAT	6
+#define R_386_JMP_SLOT	7
+#define R_386_RELATIVE	8
+#define R_386_GOTOFF	9
+#define R_386_GOTPC	10
+#define R_386_NUM	11
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_386
+
+#else
+
+/* x86-64 relocation types */
+#define R_X86_64_NONE		0	/* No reloc */
+#define R_X86_64_64		1	/* Direct 64 bit  */
+#define R_X86_64_PC32		2	/* PC relative 32 bit signed */
+#define R_X86_64_GOT32		3	/* 32 bit GOT entry */
+#define R_X86_64_PLT32		4	/* 32 bit PLT address */
+#define R_X86_64_COPY		5	/* Copy symbol at runtime */
+#define R_X86_64_GLOB_DAT	6	/* Create GOT entry */
+#define R_X86_64_JUMP_SLOT	7	/* Create PLT entry */
+#define R_X86_64_RELATIVE	8	/* Adjust by program base */
+#define R_X86_64_GOTPCREL	9	/* 32 bit signed pc relative
+					   offset to GOT */
+#define R_X86_64_32		10	/* Direct 32 bit zero extended */
+#define R_X86_64_32S		11	/* Direct 32 bit sign extended */
+#define R_X86_64_16		12	/* Direct 16 bit zero extended */
+#define R_X86_64_PC16		13	/* 16 bit sign extended pc relative */
+#define R_X86_64_8		14	/* Direct 8 bit sign extended  */
+#define R_X86_64_PC8		15	/* 8 bit sign extended pc relative */
+
+#define R_X86_64_NUM		16
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS64
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_X86_64
+
+#endif
+
+#include <asm/vdso.h>
+
+extern unsigned int vdso_enabled;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch_ia32(x) \
+	(((x)->e_machine == EM_386) || ((x)->e_machine == EM_486))
+
+#include <asm/processor.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_X86_32
+#include <asm/desc.h>
+
+#define elf_check_arch(x)	elf_check_arch_ia32(x)
+
+/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program starts %edx
+   contains a pointer to a function which might be registered using `atexit'.
+   This provides a mean for the dynamic linker to call DT_FINI functions for
+   shared libraries that have been loaded before the code runs.
+
+   A value of 0 tells we have no such handler.
+
+   We might as well make sure everything else is cleared too (except for %esp),
+   just to make things more deterministic.
+ */
+#define ELF_PLAT_INIT(_r, load_addr)		\
+	do {					\
+	_r->bx = 0; _r->cx = 0; _r->dx = 0;	\
+	_r->si = 0; _r->di = 0; _r->bp = 0;	\
+	_r->ax = 0;				\
+} while (0)
+
+/*
+ * regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+ * now struct_user_regs, they are different)
+ */
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)	\
+do {						\
+	pr_reg[0] = regs->bx;			\
+	pr_reg[1] = regs->cx;			\
+	pr_reg[2] = regs->dx;			\
+	pr_reg[3] = regs->si;			\
+	pr_reg[4] = regs->di;			\
+	pr_reg[5] = regs->bp;			\
+	pr_reg[6] = regs->ax;			\
+	pr_reg[7] = regs->ds & 0xffff;		\
+	pr_reg[8] = regs->es & 0xffff;		\
+	pr_reg[9] = regs->fs & 0xffff;		\
+	savesegment(gs, pr_reg[10]);		\
+	pr_reg[11] = regs->orig_ax;		\
+	pr_reg[12] = regs->ip;			\
+	pr_reg[13] = regs->cs & 0xffff;		\
+	pr_reg[14] = regs->flags;		\
+	pr_reg[15] = regs->sp;			\
+	pr_reg[16] = regs->ss & 0xffff;		\
+} while (0);
+
+#define ELF_PLATFORM	(utsname()->machine)
+#define set_personality_64bit()	do { } while (0)
+
+#else /* CONFIG_X86_32 */
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)			\
+	((x)->e_machine == EM_X86_64)
+
+#define compat_elf_check_arch(x)	elf_check_arch_ia32(x)
+
+static inline void start_ia32_thread(struct pt_regs *regs, u32 ip, u32 sp)
+{
+	loadsegment(fs, 0);
+	loadsegment(ds, __USER32_DS);
+	loadsegment(es, __USER32_DS);
+	load_gs_index(0);
+	regs->ip = ip;
+	regs->sp = sp;
+	regs->flags = X86_EFLAGS_IF;
+	regs->cs = __USER32_CS;
+	regs->ss = __USER32_DS;
+}
+
+static inline void elf_common_init(struct thread_struct *t,
+				   struct pt_regs *regs, const u16 ds)
+{
+	regs->ax = regs->bx = regs->cx = regs->dx = 0;
+	regs->si = regs->di = regs->bp = 0;
+	regs->r8 = regs->r9 = regs->r10 = regs->r11 = 0;
+	regs->r12 = regs->r13 = regs->r14 = regs->r15 = 0;
+	t->fs = t->gs = 0;
+	t->fsindex = t->gsindex = 0;
+	t->ds = t->es = ds;
+}
+
+#define ELF_PLAT_INIT(_r, load_addr)			\
+do {							\
+	elf_common_init(&current->thread, _r, 0);	\
+	clear_thread_flag(TIF_IA32);			\
+} while (0)
+
+#define	COMPAT_ELF_PLAT_INIT(regs, load_addr)		\
+	elf_common_init(&current->thread, regs, __USER_DS)
+
+#define	compat_start_thread(regs, ip, sp)		\
+do {							\
+	start_ia32_thread(regs, ip, sp);		\
+	set_fs(USER_DS);				\
+} while (0)
+
+#define COMPAT_SET_PERSONALITY(ex)			\
+do {							\
+	if (test_thread_flag(TIF_IA32))			\
+		clear_thread_flag(TIF_ABI_PENDING);	\
+	else						\
+		set_thread_flag(TIF_ABI_PENDING);	\
+	current->personality |= force_personality32;	\
+} while (0)
+
+#define COMPAT_ELF_PLATFORM			("i686")
+
+/*
+ * regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+ * now struct_user_regs, they are different). Assumes current is the process
+ * getting dumped.
+ */
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)			\
+do {								\
+	unsigned v;						\
+	(pr_reg)[0] = (regs)->r15;				\
+	(pr_reg)[1] = (regs)->r14;				\
+	(pr_reg)[2] = (regs)->r13;				\
+	(pr_reg)[3] = (regs)->r12;				\
+	(pr_reg)[4] = (regs)->bp;				\
+	(pr_reg)[5] = (regs)->bx;				\
+	(pr_reg)[6] = (regs)->r11;				\
+	(pr_reg)[7] = (regs)->r10;				\
+	(pr_reg)[8] = (regs)->r9;				\
+	(pr_reg)[9] = (regs)->r8;				\
+	(pr_reg)[10] = (regs)->ax;				\
+	(pr_reg)[11] = (regs)->cx;				\
+	(pr_reg)[12] = (regs)->dx;				\
+	(pr_reg)[13] = (regs)->si;				\
+	(pr_reg)[14] = (regs)->di;				\
+	(pr_reg)[15] = (regs)->orig_ax;				\
+	(pr_reg)[16] = (regs)->ip;				\
+	(pr_reg)[17] = (regs)->cs;				\
+	(pr_reg)[18] = (regs)->flags;				\
+	(pr_reg)[19] = (regs)->sp;				\
+	(pr_reg)[20] = (regs)->ss;				\
+	(pr_reg)[21] = current->thread.fs;			\
+	(pr_reg)[22] = current->thread.gs;			\
+	asm("movl %%ds,%0" : "=r" (v)); (pr_reg)[23] = v;	\
+	asm("movl %%es,%0" : "=r" (v)); (pr_reg)[24] = v;	\
+	asm("movl %%fs,%0" : "=r" (v)); (pr_reg)[25] = v;	\
+	asm("movl %%gs,%0" : "=r" (v)); (pr_reg)[26] = v;	\
+} while (0);
+
+/* I'm not sure if we can use '-' here */
+#define ELF_PLATFORM       ("x86_64")
+extern void set_personality_64bit(void);
+extern unsigned int sysctl_vsyscall32;
+extern int force_personality32;
+
+#endif /* !CONFIG_X86_32 */
+
+#define CORE_DUMP_USE_REGSET
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE		(TASK_SIZE / 3 * 2)
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP		(boot_cpu_data.x86_capability[0])
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define SET_PERSONALITY(ex) set_personality_64bit()
+
+/*
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically.
+ */
+#define elf_read_implies_exec(ex, executable_stack)	\
+	(executable_stack != EXSTACK_DISABLE_X)
+
+struct task_struct;
+
+#define	ARCH_DLINFO_IA32(vdso_enabled)					\
+do {									\
+	if (vdso_enabled) {						\
+		NEW_AUX_ENT(AT_SYSINFO,	VDSO_ENTRY);			\
+		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_CURRENT_BASE);	\
+	}								\
+} while (0)
+
+#ifdef CONFIG_X86_32
+
+#define VDSO_HIGH_BASE		(__fix_to_virt(FIX_VDSO))
+
+#define ARCH_DLINFO		ARCH_DLINFO_IA32(vdso_enabled)
+
+/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
+
+#else /* CONFIG_X86_32 */
+
+#define VDSO_HIGH_BASE		0xffffe000U /* CONFIG_COMPAT_VDSO address */
+
+/* 1GB for 64bit, 8MB for 32bit */
+#define STACK_RND_MASK (test_thread_flag(TIF_IA32) ? 0x7ff : 0x3fffff)
+
+#define ARCH_DLINFO							\
+do {									\
+	if (vdso_enabled)						\
+		NEW_AUX_ENT(AT_SYSINFO_EHDR,				\
+			    (unsigned long)current->mm->context.vdso);	\
+} while (0)
+
+#define AT_SYSINFO		32
+
+#define COMPAT_ARCH_DLINFO	ARCH_DLINFO_IA32(sysctl_vsyscall32)
+
+#define COMPAT_ELF_ET_DYN_BASE	(TASK_UNMAPPED_BASE + 0x1000000)
+
+#endif /* !CONFIG_X86_32 */
+
+#define VDSO_CURRENT_BASE	((unsigned long)current->mm->context.vdso)
+
+#define VDSO_ENTRY							\
+	((unsigned long)VDSO32_SYMBOL(VDSO_CURRENT_BASE, vsyscall))
+
+struct linux_binprm;
+
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+				       int executable_stack);
+
+extern int syscall32_setup_pages(struct linux_binprm *, int exstack);
+#define compat_arch_setup_additional_pages	syscall32_setup_pages
+
+extern unsigned long arch_randomize_brk(struct mm_struct *mm);
+#define arch_randomize_brk arch_randomize_brk
+
+#endif /* _ASM_X86_ELF_H */
diff --git a/arch/x86/include/asm/emergency-restart.h b/arch/x86/include/asm/emergency-restart.h
new file mode 100644
index 0000000..94826cf
--- /dev/null
+++ b/arch/x86/include/asm/emergency-restart.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_X86_EMERGENCY_RESTART_H
+#define _ASM_X86_EMERGENCY_RESTART_H
+
+enum reboot_type {
+	BOOT_TRIPLE = 't',
+	BOOT_KBD = 'k',
+#ifdef CONFIG_X86_32
+	BOOT_BIOS = 'b',
+#endif
+	BOOT_ACPI = 'a',
+	BOOT_EFI = 'e'
+};
+
+extern enum reboot_type reboot_type;
+
+extern void machine_emergency_restart(void);
+
+#endif /* _ASM_X86_EMERGENCY_RESTART_H */
diff --git a/include/asm-x86/errno.h b/arch/x86/include/asm/errno.h
similarity index 100%
rename from include/asm-x86/errno.h
rename to arch/x86/include/asm/errno.h
diff --git a/include/asm-x86/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
similarity index 100%
rename from include/asm-x86/es7000/apic.h
rename to arch/x86/include/asm/es7000/apic.h
diff --git a/include/asm-x86/es7000/apicdef.h b/arch/x86/include/asm/es7000/apicdef.h
similarity index 100%
rename from include/asm-x86/es7000/apicdef.h
rename to arch/x86/include/asm/es7000/apicdef.h
diff --git a/include/asm-x86/es7000/ipi.h b/arch/x86/include/asm/es7000/ipi.h
similarity index 100%
rename from include/asm-x86/es7000/ipi.h
rename to arch/x86/include/asm/es7000/ipi.h
diff --git a/include/asm-x86/es7000/mpparse.h b/arch/x86/include/asm/es7000/mpparse.h
similarity index 100%
rename from include/asm-x86/es7000/mpparse.h
rename to arch/x86/include/asm/es7000/mpparse.h
diff --git a/include/asm-x86/es7000/wakecpu.h b/arch/x86/include/asm/es7000/wakecpu.h
similarity index 100%
rename from include/asm-x86/es7000/wakecpu.h
rename to arch/x86/include/asm/es7000/wakecpu.h
diff --git a/arch/x86/include/asm/fb.h b/arch/x86/include/asm/fb.h
new file mode 100644
index 0000000..5301846
--- /dev/null
+++ b/arch/x86/include/asm/fb.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_X86_FB_H
+#define _ASM_X86_FB_H
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	if (boot_cpu_data.x86 > 3)
+		pgprot_val(vma->vm_page_prot) |= _PAGE_PCD;
+}
+
+#ifdef CONFIG_X86_32
+extern int fb_is_primary_device(struct fb_info *info);
+#else
+static inline int fb_is_primary_device(struct fb_info *info) { return 0; }
+#endif
+
+#endif /* _ASM_X86_FB_H */
diff --git a/include/asm-x86/fcntl.h b/arch/x86/include/asm/fcntl.h
similarity index 100%
rename from include/asm-x86/fcntl.h
rename to arch/x86/include/asm/fcntl.h
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
new file mode 100644
index 0000000..8668a94
--- /dev/null
+++ b/arch/x86/include/asm/fixmap.h
@@ -0,0 +1,68 @@
+#ifndef _ASM_X86_FIXMAP_H
+#define _ASM_X86_FIXMAP_H
+
+#ifdef CONFIG_X86_32
+# include "fixmap_32.h"
+#else
+# include "fixmap_64.h"
+#endif
+
+extern int fixmaps_set;
+
+void __native_set_fixmap(enum fixed_addresses idx, pte_t pte);
+void native_set_fixmap(enum fixed_addresses idx,
+		       unsigned long phys, pgprot_t flags);
+
+#ifndef CONFIG_PARAVIRT
+static inline void __set_fixmap(enum fixed_addresses idx,
+				unsigned long phys, pgprot_t flags)
+{
+	native_set_fixmap(idx, phys, flags);
+}
+#endif
+
+#define set_fixmap(idx, phys)				\
+	__set_fixmap(idx, phys, PAGE_KERNEL)
+
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys)			\
+	__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+
+#define clear_fixmap(idx)			\
+	__set_fixmap(idx, 0, __pgprot(0))
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without translation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static __always_inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+	return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+#endif /* _ASM_X86_FIXMAP_H */
diff --git a/arch/x86/include/asm/fixmap_32.h b/arch/x86/include/asm/fixmap_32.h
new file mode 100644
index 0000000..09f29ab
--- /dev/null
+++ b/arch/x86/include/asm/fixmap_32.h
@@ -0,0 +1,123 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_X86_FIXMAP_32_H
+#define _ASM_X86_FIXMAP_32_H
+
+
+/* used by vmalloc.c, vsyscall.lds.S.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap.
+ */
+extern unsigned long __FIXADDR_TOP;
+#define FIXADDR_USER_START     __fix_to_virt(FIX_VDSO)
+#define FIXADDR_USER_END       __fix_to_virt(FIX_VDSO - 1)
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+#include <asm/acpi.h>
+#include <asm/apicdef.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+enum fixed_addresses {
+	FIX_HOLE,
+	FIX_VDSO,
+	FIX_DBGP_BASE,
+	FIX_EARLYCON_MEM_BASE,
+#ifdef CONFIG_X86_LOCAL_APIC
+	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
+#endif
+#ifdef CONFIG_X86_IO_APIC
+	FIX_IO_APIC_BASE_0,
+	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS-1,
+#endif
+#ifdef CONFIG_X86_VISWS_APIC
+	FIX_CO_CPU,	/* Cobalt timer */
+	FIX_CO_APIC,	/* Cobalt APIC Redirection Table */
+	FIX_LI_PCIA,	/* Lithium PCI Bridge A */
+	FIX_LI_PCIB,	/* Lithium PCI Bridge B */
+#endif
+#ifdef CONFIG_X86_F00F_BUG
+	FIX_F00F_IDT,	/* Virtual mapping for IDT */
+#endif
+#ifdef CONFIG_X86_CYCLONE_TIMER
+	FIX_CYCLONE_TIMER, /*cyclone timer register*/
+#endif
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+#ifdef CONFIG_PCI_MMCONFIG
+	FIX_PCIE_MCFG,
+#endif
+#ifdef CONFIG_PARAVIRT
+	FIX_PARAVIRT_BOOTMAP,
+#endif
+	__end_of_permanent_fixed_addresses,
+	/*
+	 * 256 temporary boot-time mappings, used by early_ioremap(),
+	 * before ioremap() is functional.
+	 *
+	 * We round it up to the next 256 pages boundary so that we
+	 * can have a single pgd entry and a single pte table:
+	 */
+#define NR_FIX_BTMAPS		64
+#define FIX_BTMAPS_SLOTS	4
+	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
+			(__end_of_permanent_fixed_addresses & 255),
+	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
+	FIX_WP_TEST,
+#ifdef CONFIG_ACPI
+	FIX_ACPI_BEGIN,
+	FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
+#endif
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+	FIX_OHCI1394_BASE,
+#endif
+	__end_of_fixed_addresses
+};
+
+extern void reserve_top_address(unsigned long reserve);
+
+
+#define FIXADDR_TOP	((unsigned long)__FIXADDR_TOP)
+
+#define __FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
+#define __FIXADDR_BOOT_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START		(FIXADDR_TOP - __FIXADDR_SIZE)
+#define FIXADDR_BOOT_START	(FIXADDR_TOP - __FIXADDR_BOOT_SIZE)
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_X86_FIXMAP_32_H */
diff --git a/arch/x86/include/asm/fixmap_64.h b/arch/x86/include/asm/fixmap_64.h
new file mode 100644
index 0000000..00a30ab9
--- /dev/null
+++ b/arch/x86/include/asm/fixmap_64.h
@@ -0,0 +1,83 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ */
+
+#ifndef _ASM_X86_FIXMAP_64_H
+#define _ASM_X86_FIXMAP_64_H
+
+#include <linux/kernel.h>
+#include <asm/acpi.h>
+#include <asm/apicdef.h>
+#include <asm/page.h>
+#include <asm/vsyscall.h>
+#include <asm/efi.h>
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process.
+ *
+ * These 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages (or larger if used with an increment
+ * higher than 1). Use set_fixmap(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+enum fixed_addresses {
+	VSYSCALL_LAST_PAGE,
+	VSYSCALL_FIRST_PAGE = VSYSCALL_LAST_PAGE
+			    + ((VSYSCALL_END-VSYSCALL_START) >> PAGE_SHIFT) - 1,
+	VSYSCALL_HPET,
+	FIX_DBGP_BASE,
+	FIX_EARLYCON_MEM_BASE,
+	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
+	FIX_IO_APIC_BASE_0,
+	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
+	FIX_EFI_IO_MAP_LAST_PAGE,
+	FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
+				  + MAX_EFI_IO_PAGES - 1,
+#ifdef CONFIG_PARAVIRT
+	FIX_PARAVIRT_BOOTMAP,
+#endif
+	__end_of_permanent_fixed_addresses,
+#ifdef CONFIG_ACPI
+	FIX_ACPI_BEGIN,
+	FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
+#endif
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+	FIX_OHCI1394_BASE,
+#endif
+	/*
+	 * 256 temporary boot-time mappings, used by early_ioremap(),
+	 * before ioremap() is functional.
+	 *
+	 * We round it up to the next 256 pages boundary so that we
+	 * can have a single pgd entry and a single pte table:
+	 */
+#define NR_FIX_BTMAPS		64
+#define FIX_BTMAPS_SLOTS	4
+	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
+			(__end_of_permanent_fixed_addresses & 255),
+	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
+	__end_of_fixed_addresses
+};
+
+#define FIXADDR_TOP	(VSYSCALL_END-PAGE_SIZE)
+#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+/* Only covers 32bit vsyscalls currently. Need another set for 64bit. */
+#define FIXADDR_USER_START	((unsigned long)VSYSCALL32_VSYSCALL)
+#define FIXADDR_USER_END	(FIXADDR_USER_START + PAGE_SIZE)
+
+#endif /* _ASM_X86_FIXMAP_64_H */
diff --git a/arch/x86/include/asm/floppy.h b/arch/x86/include/asm/floppy.h
new file mode 100644
index 0000000..dbe82a5
--- /dev/null
+++ b/arch/x86/include/asm/floppy.h
@@ -0,0 +1,281 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995
+ */
+#ifndef _ASM_X86_FLOPPY_H
+#define _ASM_X86_FLOPPY_H
+
+#include <linux/vmalloc.h>
+
+/*
+ * The DMA channel used by the floppy controller cannot access data at
+ * addresses >= 16MB
+ *
+ * Went back to the 1MB limit, as some people had problems with the floppy
+ * driver otherwise. It doesn't matter much for performance anyway, as most
+ * floppy accesses go through the track buffer.
+ */
+#define _CROSS_64KB(a, s, vdma)						\
+	(!(vdma) &&							\
+	 ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
+
+#define CROSS_64KB(a, s) _CROSS_64KB(a, s, use_virtual_dma & 1)
+
+
+#define SW fd_routine[use_virtual_dma & 1]
+#define CSW fd_routine[can_use_virtual_dma & 1]
+
+
+#define fd_inb(port)		inb_p(port)
+#define fd_outb(value, port)	outb_p(value, port)
+
+#define fd_request_dma()	CSW._request_dma(FLOPPY_DMA, "floppy")
+#define fd_free_dma()		CSW._free_dma(FLOPPY_DMA)
+#define fd_enable_irq()		enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq()	disable_irq(FLOPPY_IRQ)
+#define fd_free_irq()		free_irq(FLOPPY_IRQ, NULL)
+#define fd_get_dma_residue()	SW._get_dma_residue(FLOPPY_DMA)
+#define fd_dma_mem_alloc(size)	SW._dma_mem_alloc(size)
+#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io)
+
+#define FLOPPY_CAN_FALLBACK_ON_NODMA
+
+static int virtual_dma_count;
+static int virtual_dma_residue;
+static char *virtual_dma_addr;
+static int virtual_dma_mode;
+static int doing_pdma;
+
+static irqreturn_t floppy_hardint(int irq, void *dev_id)
+{
+	unsigned char st;
+
+#undef TRACE_FLPY_INT
+
+#ifdef TRACE_FLPY_INT
+	static int calls;
+	static int bytes;
+	static int dma_wait;
+#endif
+	if (!doing_pdma)
+		return floppy_interrupt(irq, dev_id);
+
+#ifdef TRACE_FLPY_INT
+	if (!calls)
+		bytes = virtual_dma_count;
+#endif
+
+	{
+		int lcount;
+		char *lptr;
+
+		st = 1;
+		for (lcount = virtual_dma_count, lptr = virtual_dma_addr;
+		     lcount; lcount--, lptr++) {
+			st = inb(virtual_dma_port + 4) & 0xa0;
+			if (st != 0xa0)
+				break;
+			if (virtual_dma_mode)
+				outb_p(*lptr, virtual_dma_port + 5);
+			else
+				*lptr = inb_p(virtual_dma_port + 5);
+		}
+		virtual_dma_count = lcount;
+		virtual_dma_addr = lptr;
+		st = inb(virtual_dma_port + 4);
+	}
+
+#ifdef TRACE_FLPY_INT
+	calls++;
+#endif
+	if (st == 0x20)
+		return IRQ_HANDLED;
+	if (!(st & 0x20)) {
+		virtual_dma_residue += virtual_dma_count;
+		virtual_dma_count = 0;
+#ifdef TRACE_FLPY_INT
+		printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
+		       virtual_dma_count, virtual_dma_residue, calls, bytes,
+		       dma_wait);
+		calls = 0;
+		dma_wait = 0;
+#endif
+		doing_pdma = 0;
+		floppy_interrupt(irq, dev_id);
+		return IRQ_HANDLED;
+	}
+#ifdef TRACE_FLPY_INT
+	if (!virtual_dma_count)
+		dma_wait++;
+#endif
+	return IRQ_HANDLED;
+}
+
+static void fd_disable_dma(void)
+{
+	if (!(can_use_virtual_dma & 1))
+		disable_dma(FLOPPY_DMA);
+	doing_pdma = 0;
+	virtual_dma_residue += virtual_dma_count;
+	virtual_dma_count = 0;
+}
+
+static int vdma_request_dma(unsigned int dmanr, const char *device_id)
+{
+	return 0;
+}
+
+static void vdma_nop(unsigned int dummy)
+{
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+	return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static int fd_request_irq(void)
+{
+	if (can_use_virtual_dma)
+		return request_irq(FLOPPY_IRQ, floppy_hardint,
+				   IRQF_DISABLED, "floppy", NULL);
+	else
+		return request_irq(FLOPPY_IRQ, floppy_interrupt,
+				   IRQF_DISABLED, "floppy", NULL);
+}
+
+static unsigned long dma_mem_alloc(unsigned long size)
+{
+	return __get_dma_pages(GFP_KERNEL|__GFP_NORETRY, get_order(size));
+}
+
+
+static unsigned long vdma_mem_alloc(unsigned long size)
+{
+	return (unsigned long)vmalloc(size);
+
+}
+
+#define nodma_mem_alloc(size) vdma_mem_alloc(size)
+
+static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+	if ((unsigned long)addr >= (unsigned long)high_memory)
+		vfree((void *)addr);
+	else
+		free_pages(addr, get_order(size));
+}
+
+#define fd_dma_mem_free(addr, size)  _fd_dma_mem_free(addr, size)
+
+static void _fd_chose_dma_mode(char *addr, unsigned long size)
+{
+	if (can_use_virtual_dma == 2) {
+		if ((unsigned long)addr >= (unsigned long)high_memory ||
+		    isa_virt_to_bus(addr) >= 0x1000000 ||
+		    _CROSS_64KB(addr, size, 0))
+			use_virtual_dma = 1;
+		else
+			use_virtual_dma = 0;
+	} else {
+		use_virtual_dma = can_use_virtual_dma & 1;
+	}
+}
+
+#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size)
+
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	doing_pdma = 1;
+	virtual_dma_port = io;
+	virtual_dma_mode = (mode == DMA_MODE_WRITE);
+	virtual_dma_addr = addr;
+	virtual_dma_count = size;
+	virtual_dma_residue = 0;
+	return 0;
+}
+
+static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+#ifdef FLOPPY_SANITY_CHECK
+	if (CROSS_64KB(addr, size)) {
+		printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
+		return -1;
+	}
+#endif
+	/* actual, physical DMA */
+	doing_pdma = 0;
+	clear_dma_ff(FLOPPY_DMA);
+	set_dma_mode(FLOPPY_DMA, mode);
+	set_dma_addr(FLOPPY_DMA, isa_virt_to_bus(addr));
+	set_dma_count(FLOPPY_DMA, size);
+	enable_dma(FLOPPY_DMA);
+	return 0;
+}
+
+static struct fd_routine_l {
+	int (*_request_dma)(unsigned int dmanr, const char *device_id);
+	void (*_free_dma)(unsigned int dmanr);
+	int (*_get_dma_residue)(unsigned int dummy);
+	unsigned long (*_dma_mem_alloc)(unsigned long size);
+	int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
+} fd_routine[] = {
+	{
+		request_dma,
+		free_dma,
+		get_dma_residue,
+		dma_mem_alloc,
+		hard_dma_setup
+	},
+	{
+		vdma_request_dma,
+		vdma_nop,
+		vdma_get_dma_residue,
+		vdma_mem_alloc,
+		vdma_dma_setup
+	}
+};
+
+
+static int FDC1 = 0x3f0;
+static int FDC2 = -1;
+
+/*
+ * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock
+ * is needed to prevent corrupted CMOS RAM in case "insmod floppy"
+ * coincides with another rtc CMOS user.		Paul G.
+ */
+#define FLOPPY0_TYPE					\
+({							\
+	unsigned long flags;				\
+	unsigned char val;				\
+	spin_lock_irqsave(&rtc_lock, flags);		\
+	val = (CMOS_READ(0x10) >> 4) & 15;		\
+	spin_unlock_irqrestore(&rtc_lock, flags);	\
+	val;						\
+})
+
+#define FLOPPY1_TYPE					\
+({							\
+	unsigned long flags;				\
+	unsigned char val;				\
+	spin_lock_irqsave(&rtc_lock, flags);		\
+	val = CMOS_READ(0x10) & 15;			\
+	spin_unlock_irqrestore(&rtc_lock, flags);	\
+	val;						\
+})
+
+#define N_FDC 2
+#define N_DRIVE 8
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* _ASM_X86_FLOPPY_H */
diff --git a/include/asm-x86/frame.h b/arch/x86/include/asm/frame.h
similarity index 100%
rename from include/asm-x86/frame.h
rename to arch/x86/include/asm/frame.h
diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
new file mode 100644
index 0000000..47f7e65
--- /dev/null
+++ b/arch/x86/include/asm/ftrace.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_X86_FTRACE_H
+#define _ASM_X86_FTRACE_H
+
+#ifdef CONFIG_FTRACE
+#define MCOUNT_ADDR		((long)(mcount))
+#define MCOUNT_INSN_SIZE	5 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void mcount(void);
+
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	/*
+	 * call mcount is "e8 <4 byte offset>"
+	 * The addr points to the 4 byte offset and the caller of this
+	 * function wants the pointer to e8. Simply subtract one.
+	 */
+	return addr - 1;
+}
+#endif
+
+#endif /* CONFIG_FTRACE */
+
+#endif /* _ASM_X86_FTRACE_H */
diff --git a/arch/x86/include/asm/futex.h b/arch/x86/include/asm/futex.h
new file mode 100644
index 0000000..1f11ce4
--- /dev/null
+++ b/arch/x86/include/asm/futex.h
@@ -0,0 +1,140 @@
+#ifndef _ASM_X86_FUTEX_H
+#define _ASM_X86_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+
+#include <asm/asm.h>
+#include <asm/errno.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+
+#define __futex_atomic_op1(insn, ret, oldval, uaddr, oparg)	\
+	asm volatile("1:\t" insn "\n"				\
+		     "2:\t.section .fixup,\"ax\"\n"		\
+		     "3:\tmov\t%3, %1\n"			\
+		     "\tjmp\t2b\n"				\
+		     "\t.previous\n"				\
+		     _ASM_EXTABLE(1b, 3b)			\
+		     : "=r" (oldval), "=r" (ret), "+m" (*uaddr)	\
+		     : "i" (-EFAULT), "0" (oparg), "1" (0))
+
+#define __futex_atomic_op2(insn, ret, oldval, uaddr, oparg)	\
+	asm volatile("1:\tmovl	%2, %0\n"			\
+		     "\tmovl\t%0, %3\n"				\
+		     "\t" insn "\n"				\
+		     "2:\t" LOCK_PREFIX "cmpxchgl %3, %2\n"	\
+		     "\tjnz\t1b\n"				\
+		     "3:\t.section .fixup,\"ax\"\n"		\
+		     "4:\tmov\t%5, %1\n"			\
+		     "\tjmp\t3b\n"				\
+		     "\t.previous\n"				\
+		     _ASM_EXTABLE(1b, 4b)			\
+		     _ASM_EXTABLE(2b, 4b)			\
+		     : "=&a" (oldval), "=&r" (ret),		\
+		       "+m" (*uaddr), "=&r" (tem)		\
+		     : "r" (oparg), "i" (-EFAULT), "1" (0))
+
+static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret, tem;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_BSWAP)
+	/* Real i386 machines can only support FUTEX_OP_SET */
+	if (op != FUTEX_OP_SET && boot_cpu_data.x86 == 3)
+		return -ENOSYS;
+#endif
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op1("xchgl %0, %2", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op1(LOCK_PREFIX "xaddl %0, %2", ret, oldval,
+				   uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op2("orl %4, %3", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op2("andl %4, %3", ret, oldval, uaddr, ~oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op2("xorl %4, %3", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ:
+			ret = (oldval == cmparg);
+			break;
+		case FUTEX_OP_CMP_NE:
+			ret = (oldval != cmparg);
+			break;
+		case FUTEX_OP_CMP_LT:
+			ret = (oldval < cmparg);
+			break;
+		case FUTEX_OP_CMP_GE:
+			ret = (oldval >= cmparg);
+			break;
+		case FUTEX_OP_CMP_LE:
+			ret = (oldval <= cmparg);
+			break;
+		case FUTEX_OP_CMP_GT:
+			ret = (oldval > cmparg);
+			break;
+		default:
+			ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval,
+						int newval)
+{
+
+#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_BSWAP)
+	/* Real i386 machines have no cmpxchg instruction */
+	if (boot_cpu_data.x86 == 3)
+		return -ENOSYS;
+#endif
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	asm volatile("1:\t" LOCK_PREFIX "cmpxchgl %3, %1\n"
+		     "2:\t.section .fixup, \"ax\"\n"
+		     "3:\tmov     %2, %0\n"
+		     "\tjmp     2b\n"
+		     "\t.previous\n"
+		     _ASM_EXTABLE(1b, 3b)
+		     : "=a" (oldval), "+m" (*uaddr)
+		     : "i" (-EFAULT), "r" (newval), "0" (oldval)
+		     : "memory"
+	);
+
+	return oldval;
+}
+
+#endif
+#endif /* _ASM_X86_FUTEX_H */
diff --git a/arch/x86/include/asm/gart.h b/arch/x86/include/asm/gart.h
new file mode 100644
index 0000000..7425226
--- /dev/null
+++ b/arch/x86/include/asm/gart.h
@@ -0,0 +1,73 @@
+#ifndef _ASM_X86_GART_H
+#define _ASM_X86_GART_H
+
+#include <asm/e820.h>
+
+extern void set_up_gart_resume(u32, u32);
+
+extern int fallback_aper_order;
+extern int fallback_aper_force;
+extern int fix_aperture;
+
+/* PTE bits. */
+#define GPTE_VALID	1
+#define GPTE_COHERENT	2
+
+/* Aperture control register bits. */
+#define GARTEN		(1<<0)
+#define DISGARTCPU	(1<<4)
+#define DISGARTIO	(1<<5)
+
+/* GART cache control register bits. */
+#define INVGART		(1<<0)
+#define GARTPTEERR	(1<<1)
+
+/* K8 On-cpu GART registers */
+#define AMD64_GARTAPERTURECTL	0x90
+#define AMD64_GARTAPERTUREBASE	0x94
+#define AMD64_GARTTABLEBASE	0x98
+#define AMD64_GARTCACHECTL	0x9c
+#define AMD64_GARTEN		(1<<0)
+
+extern int agp_amd64_init(void);
+
+static inline void enable_gart_translation(struct pci_dev *dev, u64 addr)
+{
+	u32 tmp, ctl;
+
+        /* address of the mappings table */
+        addr >>= 12;
+        tmp = (u32) addr<<4;
+        tmp &= ~0xf;
+        pci_write_config_dword(dev, AMD64_GARTTABLEBASE, tmp);
+
+        /* Enable GART translation for this hammer. */
+        pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl);
+        ctl |= GARTEN;
+        ctl &= ~(DISGARTCPU | DISGARTIO);
+        pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
+}
+
+static inline int aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)
+{
+	if (!aper_base)
+		return 0;
+
+	if (aper_base + aper_size > 0x100000000ULL) {
+		printk(KERN_INFO "Aperture beyond 4GB. Ignoring.\n");
+		return 0;
+	}
+	if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
+		printk(KERN_INFO "Aperture pointing to e820 RAM. Ignoring.\n");
+		return 0;
+	}
+	if (aper_size < min_size) {
+		printk(KERN_INFO "Aperture too small (%d MB) than (%d MB)\n",
+				 aper_size>>20, min_size>>20);
+		return 0;
+	}
+
+	return 1;
+}
+
+#endif /* _ASM_X86_GART_H */
diff --git a/include/asm-x86/genapic.h b/arch/x86/include/asm/genapic.h
similarity index 100%
rename from include/asm-x86/genapic.h
rename to arch/x86/include/asm/genapic.h
diff --git a/arch/x86/include/asm/genapic_32.h b/arch/x86/include/asm/genapic_32.h
new file mode 100644
index 0000000..5cbd4fc
--- /dev/null
+++ b/arch/x86/include/asm/genapic_32.h
@@ -0,0 +1,126 @@
+#ifndef _ASM_X86_GENAPIC_32_H
+#define _ASM_X86_GENAPIC_32_H
+
+#include <asm/mpspec.h>
+
+/*
+ * Generic APIC driver interface.
+ *
+ * An straight forward mapping of the APIC related parts of the
+ * x86 subarchitecture interface to a dynamic object.
+ *
+ * This is used by the "generic" x86 subarchitecture.
+ *
+ * Copyright 2003 Andi Kleen, SuSE Labs.
+ */
+
+struct mpc_config_bus;
+struct mp_config_table;
+struct mpc_config_processor;
+
+struct genapic {
+	char *name;
+	int (*probe)(void);
+
+	int (*apic_id_registered)(void);
+	cpumask_t (*target_cpus)(void);
+	int int_delivery_mode;
+	int int_dest_mode;
+	int ESR_DISABLE;
+	int apic_destination_logical;
+	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
+	unsigned long (*check_apicid_present)(int apicid);
+	int no_balance_irq;
+	int no_ioapic_check;
+	void (*init_apic_ldr)(void);
+	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
+
+	void (*setup_apic_routing)(void);
+	int (*multi_timer_check)(int apic, int irq);
+	int (*apicid_to_node)(int logical_apicid);
+	int (*cpu_to_logical_apicid)(int cpu);
+	int (*cpu_present_to_apicid)(int mps_cpu);
+	physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
+	void (*setup_portio_remap)(void);
+	int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
+	void (*enable_apic_mode)(void);
+	u32 (*phys_pkg_id)(u32 cpuid_apic, int index_msb);
+
+	/* mpparse */
+	/* When one of the next two hooks returns 1 the genapic
+	   is switched to this. Essentially they are additional probe
+	   functions. */
+	int (*mps_oem_check)(struct mp_config_table *mpc, char *oem,
+			     char *productid);
+	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
+
+	unsigned (*get_apic_id)(unsigned long x);
+	unsigned long apic_id_mask;
+	unsigned int (*cpu_mask_to_apicid)(cpumask_t cpumask);
+	cpumask_t (*vector_allocation_domain)(int cpu);
+
+#ifdef CONFIG_SMP
+	/* ipi */
+	void (*send_IPI_mask)(cpumask_t mask, int vector);
+	void (*send_IPI_allbutself)(int vector);
+	void (*send_IPI_all)(int vector);
+#endif
+};
+
+#define APICFUNC(x) .x = x,
+
+/* More functions could be probably marked IPIFUNC and save some space
+   in UP GENERICARCH kernels, but I don't have the nerve right now
+   to untangle this mess. -AK  */
+#ifdef CONFIG_SMP
+#define IPIFUNC(x) APICFUNC(x)
+#else
+#define IPIFUNC(x)
+#endif
+
+#define APIC_INIT(aname, aprobe)			\
+{							\
+	.name = aname,					\
+	.probe = aprobe,				\
+	.int_delivery_mode = INT_DELIVERY_MODE,		\
+	.int_dest_mode = INT_DEST_MODE,			\
+	.no_balance_irq = NO_BALANCE_IRQ,		\
+	.ESR_DISABLE = esr_disable,			\
+	.apic_destination_logical = APIC_DEST_LOGICAL,	\
+	APICFUNC(apic_id_registered)			\
+	APICFUNC(target_cpus)				\
+	APICFUNC(check_apicid_used)			\
+	APICFUNC(check_apicid_present)			\
+	APICFUNC(init_apic_ldr)				\
+	APICFUNC(ioapic_phys_id_map)			\
+	APICFUNC(setup_apic_routing)			\
+	APICFUNC(multi_timer_check)			\
+	APICFUNC(apicid_to_node)			\
+	APICFUNC(cpu_to_logical_apicid)			\
+	APICFUNC(cpu_present_to_apicid)			\
+	APICFUNC(apicid_to_cpu_present)			\
+	APICFUNC(setup_portio_remap)			\
+	APICFUNC(check_phys_apicid_present)		\
+	APICFUNC(mps_oem_check)				\
+	APICFUNC(get_apic_id)				\
+	.apic_id_mask = APIC_ID_MASK,			\
+	APICFUNC(cpu_mask_to_apicid)			\
+	APICFUNC(vector_allocation_domain)			\
+	APICFUNC(acpi_madt_oem_check)			\
+	IPIFUNC(send_IPI_mask)				\
+	IPIFUNC(send_IPI_allbutself)			\
+	IPIFUNC(send_IPI_all)				\
+	APICFUNC(enable_apic_mode)			\
+	APICFUNC(phys_pkg_id)				\
+}
+
+extern struct genapic *genapic;
+
+enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
+#define get_uv_system_type()		UV_NONE
+#define is_uv_system()			0
+#define uv_wakeup_secondary(a, b)	1
+#define uv_system_init()		do {} while (0)
+
+
+#endif /* _ASM_X86_GENAPIC_32_H */
diff --git a/arch/x86/include/asm/genapic_64.h b/arch/x86/include/asm/genapic_64.h
new file mode 100644
index 0000000..13c4e96
--- /dev/null
+++ b/arch/x86/include/asm/genapic_64.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_X86_GENAPIC_64_H
+#define _ASM_X86_GENAPIC_64_H
+
+/*
+ * Copyright 2004 James Cleverdon, IBM.
+ * Subject to the GNU Public License, v.2
+ *
+ * Generic APIC sub-arch data struct.
+ *
+ * Hacked for x86-64 by James Cleverdon from i386 architecture code by
+ * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
+ * James Cleverdon.
+ */
+
+struct genapic {
+	char *name;
+	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
+	u32 int_delivery_mode;
+	u32 int_dest_mode;
+	int (*apic_id_registered)(void);
+	cpumask_t (*target_cpus)(void);
+	cpumask_t (*vector_allocation_domain)(int cpu);
+	void (*init_apic_ldr)(void);
+	/* ipi */
+	void (*send_IPI_mask)(cpumask_t mask, int vector);
+	void (*send_IPI_allbutself)(int vector);
+	void (*send_IPI_all)(int vector);
+	void (*send_IPI_self)(int vector);
+	/* */
+	unsigned int (*cpu_mask_to_apicid)(cpumask_t cpumask);
+	unsigned int (*phys_pkg_id)(int index_msb);
+	unsigned int (*get_apic_id)(unsigned long x);
+	unsigned long (*set_apic_id)(unsigned int id);
+	unsigned long apic_id_mask;
+};
+
+extern struct genapic *genapic;
+
+extern struct genapic apic_flat;
+extern struct genapic apic_physflat;
+extern struct genapic apic_x2apic_cluster;
+extern struct genapic apic_x2apic_phys;
+extern int acpi_madt_oem_check(char *, char *);
+
+extern void apic_send_IPI_self(int vector);
+enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
+extern enum uv_system_type get_uv_system_type(void);
+extern int is_uv_system(void);
+
+extern struct genapic apic_x2apic_uv_x;
+DECLARE_PER_CPU(int, x2apic_extra_bits);
+extern void uv_cpu_init(void);
+extern void uv_system_init(void);
+extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip);
+
+extern void setup_apic_routing(void);
+
+#endif /* _ASM_X86_GENAPIC_64_H */
diff --git a/arch/x86/include/asm/geode.h b/arch/x86/include/asm/geode.h
new file mode 100644
index 0000000..ad3c2ed
--- /dev/null
+++ b/arch/x86/include/asm/geode.h
@@ -0,0 +1,253 @@
+/*
+ * AMD Geode definitions
+ * Copyright (C) 2006, Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_X86_GEODE_H
+#define _ASM_X86_GEODE_H
+
+#include <asm/processor.h>
+#include <linux/io.h>
+
+/* Generic southbridge functions */
+
+#define GEODE_DEV_PMS 0
+#define GEODE_DEV_ACPI 1
+#define GEODE_DEV_GPIO 2
+#define GEODE_DEV_MFGPT 3
+
+extern int geode_get_dev_base(unsigned int dev);
+
+/* Useful macros */
+#define geode_pms_base()	geode_get_dev_base(GEODE_DEV_PMS)
+#define geode_acpi_base()	geode_get_dev_base(GEODE_DEV_ACPI)
+#define geode_gpio_base()	geode_get_dev_base(GEODE_DEV_GPIO)
+#define geode_mfgpt_base()	geode_get_dev_base(GEODE_DEV_MFGPT)
+
+/* MSRS */
+
+#define MSR_GLIU_P2D_RO0	0x10000029
+
+#define MSR_LX_GLD_MSR_CONFIG	0x48002001
+#define MSR_LX_MSR_PADSEL	0x48002011	/* NOT 0x48000011; the data
+						 * sheet has the wrong value */
+#define MSR_GLCP_SYS_RSTPLL	0x4C000014
+#define MSR_GLCP_DOTPLL		0x4C000015
+
+#define MSR_LBAR_SMB		0x5140000B
+#define MSR_LBAR_GPIO		0x5140000C
+#define MSR_LBAR_MFGPT		0x5140000D
+#define MSR_LBAR_ACPI		0x5140000E
+#define MSR_LBAR_PMS		0x5140000F
+
+#define MSR_DIVIL_SOFT_RESET	0x51400017
+
+#define MSR_PIC_YSEL_LOW	0x51400020
+#define MSR_PIC_YSEL_HIGH	0x51400021
+#define MSR_PIC_ZSEL_LOW	0x51400022
+#define MSR_PIC_ZSEL_HIGH	0x51400023
+#define MSR_PIC_IRQM_LPC	0x51400025
+
+#define MSR_MFGPT_IRQ		0x51400028
+#define MSR_MFGPT_NR		0x51400029
+#define MSR_MFGPT_SETUP		0x5140002B
+
+#define MSR_LX_SPARE_MSR	0x80000011	/* DC-specific */
+
+#define MSR_GX_GLD_MSR_CONFIG	0xC0002001
+#define MSR_GX_MSR_PADSEL	0xC0002011
+
+/* Resource Sizes */
+
+#define LBAR_GPIO_SIZE		0xFF
+#define LBAR_MFGPT_SIZE		0x40
+#define LBAR_ACPI_SIZE		0x40
+#define LBAR_PMS_SIZE		0x80
+
+/* ACPI registers (PMS block) */
+
+/*
+ * PM1_EN is only valid when VSA is enabled for 16 bit reads.
+ * When VSA is not enabled, *always* read both PM1_STS and PM1_EN
+ * with a 32 bit read at offset 0x0
+ */
+
+#define PM1_STS			0x00
+#define PM1_EN			0x02
+#define PM1_CNT			0x08
+#define PM2_CNT			0x0C
+#define PM_TMR			0x10
+#define PM_GPE0_STS		0x18
+#define PM_GPE0_EN		0x1C
+
+/* PMC registers (PMS block) */
+
+#define PM_SSD			0x00
+#define PM_SCXA			0x04
+#define PM_SCYA			0x08
+#define PM_OUT_SLPCTL		0x0C
+#define PM_SCLK			0x10
+#define PM_SED			0x1
+#define PM_SCXD			0x18
+#define PM_SCYD			0x1C
+#define PM_IN_SLPCTL		0x20
+#define PM_WKD			0x30
+#define PM_WKXD			0x34
+#define PM_RD			0x38
+#define PM_WKXA			0x3C
+#define PM_FSD			0x40
+#define PM_TSD			0x44
+#define PM_PSD			0x48
+#define PM_NWKD			0x4C
+#define PM_AWKD			0x50
+#define PM_SSC			0x54
+
+/* VSA2 magic values */
+
+#define VSA_VRC_INDEX		0xAC1C
+#define VSA_VRC_DATA		0xAC1E
+#define VSA_VR_UNLOCK		0xFC53	/* unlock virtual register */
+#define VSA_VR_SIGNATURE	0x0003
+#define VSA_VR_MEM_SIZE		0x0200
+#define AMD_VSA_SIG		0x4132	/* signature is ascii 'VSA2' */
+#define GSW_VSA_SIG		0x534d  /* General Software signature */
+/* GPIO */
+
+#define GPIO_OUTPUT_VAL		0x00
+#define GPIO_OUTPUT_ENABLE	0x04
+#define GPIO_OUTPUT_OPEN_DRAIN	0x08
+#define GPIO_OUTPUT_INVERT	0x0C
+#define GPIO_OUTPUT_AUX1	0x10
+#define GPIO_OUTPUT_AUX2	0x14
+#define GPIO_PULL_UP		0x18
+#define GPIO_PULL_DOWN		0x1C
+#define GPIO_INPUT_ENABLE	0x20
+#define GPIO_INPUT_INVERT	0x24
+#define GPIO_INPUT_FILTER	0x28
+#define GPIO_INPUT_EVENT_COUNT	0x2C
+#define GPIO_READ_BACK		0x30
+#define GPIO_INPUT_AUX1		0x34
+#define GPIO_EVENTS_ENABLE	0x38
+#define GPIO_LOCK_ENABLE	0x3C
+#define GPIO_POSITIVE_EDGE_EN	0x40
+#define GPIO_NEGATIVE_EDGE_EN	0x44
+#define GPIO_POSITIVE_EDGE_STS	0x48
+#define GPIO_NEGATIVE_EDGE_STS	0x4C
+
+#define GPIO_MAP_X		0xE0
+#define GPIO_MAP_Y		0xE4
+#define GPIO_MAP_Z		0xE8
+#define GPIO_MAP_W		0xEC
+
+static inline u32 geode_gpio(unsigned int nr)
+{
+	BUG_ON(nr > 28);
+	return 1 << nr;
+}
+
+extern void geode_gpio_set(u32, unsigned int);
+extern void geode_gpio_clear(u32, unsigned int);
+extern int geode_gpio_isset(u32, unsigned int);
+extern void geode_gpio_setup_event(unsigned int, int, int);
+extern void geode_gpio_set_irq(unsigned int, unsigned int);
+
+static inline void geode_gpio_event_irq(unsigned int gpio, int pair)
+{
+	geode_gpio_setup_event(gpio, pair, 0);
+}
+
+static inline void geode_gpio_event_pme(unsigned int gpio, int pair)
+{
+	geode_gpio_setup_event(gpio, pair, 1);
+}
+
+/* Specific geode tests */
+
+static inline int is_geode_gx(void)
+{
+	return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
+		(boot_cpu_data.x86 == 5) &&
+		(boot_cpu_data.x86_model == 5));
+}
+
+static inline int is_geode_lx(void)
+{
+	return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
+		(boot_cpu_data.x86 == 5) &&
+		(boot_cpu_data.x86_model == 10));
+}
+
+static inline int is_geode(void)
+{
+	return (is_geode_gx() || is_geode_lx());
+}
+
+#ifdef CONFIG_MGEODE_LX
+extern int geode_has_vsa2(void);
+#else
+static inline int geode_has_vsa2(void)
+{
+	return 0;
+}
+#endif
+
+/* MFGPTs */
+
+#define MFGPT_MAX_TIMERS	8
+#define MFGPT_TIMER_ANY		(-1)
+
+#define MFGPT_DOMAIN_WORKING	1
+#define MFGPT_DOMAIN_STANDBY	2
+#define MFGPT_DOMAIN_ANY	(MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY)
+
+#define MFGPT_CMP1		0
+#define MFGPT_CMP2		1
+
+#define MFGPT_EVENT_IRQ		0
+#define MFGPT_EVENT_NMI		1
+#define MFGPT_EVENT_RESET	3
+
+#define MFGPT_REG_CMP1		0
+#define MFGPT_REG_CMP2		2
+#define MFGPT_REG_COUNTER	4
+#define MFGPT_REG_SETUP		6
+
+#define MFGPT_SETUP_CNTEN	(1 << 15)
+#define MFGPT_SETUP_CMP2	(1 << 14)
+#define MFGPT_SETUP_CMP1	(1 << 13)
+#define MFGPT_SETUP_SETUP	(1 << 12)
+#define MFGPT_SETUP_STOPEN	(1 << 11)
+#define MFGPT_SETUP_EXTEN	(1 << 10)
+#define MFGPT_SETUP_REVEN	(1 << 5)
+#define MFGPT_SETUP_CLKSEL	(1 << 4)
+
+static inline void geode_mfgpt_write(int timer, u16 reg, u16 value)
+{
+	u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
+	outw(value, base + reg + (timer * 8));
+}
+
+static inline u16 geode_mfgpt_read(int timer, u16 reg)
+{
+	u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
+	return inw(base + reg + (timer * 8));
+}
+
+extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
+extern int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable);
+extern int geode_mfgpt_alloc_timer(int timer, int domain);
+
+#define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1)
+#define geode_mfgpt_release_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 0)
+
+#ifdef CONFIG_GEODE_MFGPT_TIMER
+extern int __init mfgpt_timer_setup(void);
+#else
+static inline int mfgpt_timer_setup(void) { return 0; }
+#endif
+
+#endif /* _ASM_X86_GEODE_H */
diff --git a/arch/x86/include/asm/gpio.h b/arch/x86/include/asm/gpio.h
new file mode 100644
index 0000000..49dbfdf
--- /dev/null
+++ b/arch/x86/include/asm/gpio.h
@@ -0,0 +1,56 @@
+/*
+ * Generic GPIO API implementation for x86.
+ *
+ * Derived from the generic GPIO API for powerpc:
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _ASM_X86_GPIO_H
+#define _ASM_X86_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+/*
+ * Not implemented, yet.
+ */
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* _ASM_X86_GPIO_H */
diff --git a/include/asm-x86/hardirq.h b/arch/x86/include/asm/hardirq.h
similarity index 100%
rename from include/asm-x86/hardirq.h
rename to arch/x86/include/asm/hardirq.h
diff --git a/arch/x86/include/asm/hardirq_32.h b/arch/x86/include/asm/hardirq_32.h
new file mode 100644
index 0000000..5ca135e
--- /dev/null
+++ b/arch/x86/include/asm/hardirq_32.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_X86_HARDIRQ_32_H
+#define _ASM_X86_HARDIRQ_32_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+	unsigned long idle_timestamp;
+	unsigned int __nmi_count;	/* arch dependent */
+	unsigned int apic_timer_irqs;	/* arch dependent */
+	unsigned int irq0_irqs;
+	unsigned int irq_resched_count;
+	unsigned int irq_call_count;
+	unsigned int irq_tlb_count;
+	unsigned int irq_thermal_count;
+	unsigned int irq_spurious_count;
+} ____cacheline_aligned irq_cpustat_t;
+
+DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
+
+#define __ARCH_IRQ_STAT
+#define __IRQ_STAT(cpu, member) (per_cpu(irq_stat, cpu).member)
+
+void ack_bad_irq(unsigned int irq);
+#include <linux/irq_cpustat.h>
+
+#endif /* _ASM_X86_HARDIRQ_32_H */
diff --git a/arch/x86/include/asm/hardirq_64.h b/arch/x86/include/asm/hardirq_64.h
new file mode 100644
index 0000000..1ba381f
--- /dev/null
+++ b/arch/x86/include/asm/hardirq_64.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_X86_HARDIRQ_64_H
+#define _ASM_X86_HARDIRQ_64_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+#include <asm/pda.h>
+#include <asm/apic.h>
+
+/* We can have at most NR_VECTORS irqs routed to a cpu at a time */
+#define MAX_HARDIRQS_PER_CPU NR_VECTORS
+
+#define __ARCH_IRQ_STAT 1
+
+#define local_softirq_pending() read_pda(__softirq_pending)
+
+#define __ARCH_SET_SOFTIRQ_PENDING 1
+
+#define set_softirq_pending(x) write_pda(__softirq_pending, (x))
+#define or_softirq_pending(x)  or_pda(__softirq_pending, (x))
+
+extern void ack_bad_irq(unsigned int irq);
+
+#endif /* _ASM_X86_HARDIRQ_64_H */
diff --git a/arch/x86/include/asm/highmem.h b/arch/x86/include/asm/highmem.h
new file mode 100644
index 0000000..a3b3b7c
--- /dev/null
+++ b/arch/x86/include/asm/highmem.h
@@ -0,0 +1,82 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#ifndef _ASM_X86_HIGHMEM_H
+#define _ASM_X86_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/interrupt.h>
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#include <asm/tlbflush.h>
+#include <asm/paravirt.h>
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+/*
+ * Ordering is:
+ *
+ * FIXADDR_TOP
+ * 			fixed_addresses
+ * FIXADDR_START
+ * 			temp fixed addresses
+ * FIXADDR_BOOT_START
+ * 			Persistent kmap area
+ * PKMAP_BASE
+ * VMALLOC_END
+ * 			Vmalloc area
+ * VMALLOC_START
+ * high_memory
+ */
+#define LAST_PKMAP_MASK (LAST_PKMAP-1)
+#define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+void *kmap(struct page *page);
+void kunmap(struct page *page);
+void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot);
+void *kmap_atomic(struct page *page, enum km_type type);
+void kunmap_atomic(void *kvaddr, enum km_type type);
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
+struct page *kmap_atomic_to_page(void *ptr);
+
+#ifndef CONFIG_PARAVIRT
+#define kmap_atomic_pte(page, type)	kmap_atomic(page, type)
+#endif
+
+#define flush_cache_kmaps()	do { } while (0)
+
+extern void add_highpages_with_active_regions(int nid, unsigned long start_pfn,
+					unsigned long end_pfn);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_HIGHMEM_H */
diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h
new file mode 100644
index 0000000..1c22cb0
--- /dev/null
+++ b/arch/x86/include/asm/hpet.h
@@ -0,0 +1,114 @@
+#ifndef _ASM_X86_HPET_H
+#define _ASM_X86_HPET_H
+
+#include <linux/msi.h>
+
+#ifdef CONFIG_HPET_TIMER
+
+#define HPET_MMAP_SIZE		1024
+
+#define HPET_ID			0x000
+#define HPET_PERIOD		0x004
+#define HPET_CFG		0x010
+#define HPET_STATUS		0x020
+#define HPET_COUNTER		0x0f0
+
+#define HPET_Tn_CFG(n)		(0x100 + 0x20 * n)
+#define HPET_Tn_CMP(n)		(0x108 + 0x20 * n)
+#define HPET_Tn_ROUTE(n)	(0x110 + 0x20 * n)
+
+#define HPET_T0_CFG		0x100
+#define HPET_T0_CMP		0x108
+#define HPET_T0_ROUTE		0x110
+#define HPET_T1_CFG		0x120
+#define HPET_T1_CMP		0x128
+#define HPET_T1_ROUTE		0x130
+#define HPET_T2_CFG		0x140
+#define HPET_T2_CMP		0x148
+#define HPET_T2_ROUTE		0x150
+
+#define HPET_ID_REV		0x000000ff
+#define HPET_ID_NUMBER		0x00001f00
+#define HPET_ID_64BIT		0x00002000
+#define HPET_ID_LEGSUP		0x00008000
+#define HPET_ID_VENDOR		0xffff0000
+#define	HPET_ID_NUMBER_SHIFT	8
+#define HPET_ID_VENDOR_SHIFT	16
+
+#define HPET_ID_VENDOR_8086	0x8086
+
+#define HPET_CFG_ENABLE		0x001
+#define HPET_CFG_LEGACY		0x002
+#define	HPET_LEGACY_8254	2
+#define	HPET_LEGACY_RTC		8
+
+#define HPET_TN_LEVEL		0x0002
+#define HPET_TN_ENABLE		0x0004
+#define HPET_TN_PERIODIC	0x0008
+#define HPET_TN_PERIODIC_CAP	0x0010
+#define HPET_TN_64BIT_CAP	0x0020
+#define HPET_TN_SETVAL		0x0040
+#define HPET_TN_32BIT		0x0100
+#define HPET_TN_ROUTE		0x3e00
+#define HPET_TN_FSB		0x4000
+#define HPET_TN_FSB_CAP		0x8000
+#define HPET_TN_ROUTE_SHIFT	9
+
+/* Max HPET Period is 10^8 femto sec as in HPET spec */
+#define HPET_MAX_PERIOD		100000000UL
+/*
+ * Min HPET period is 10^5 femto sec just for safety. If it is less than this,
+ * then 32 bit HPET counter wrapsaround in less than 0.5 sec.
+ */
+#define HPET_MIN_PERIOD		100000UL
+
+/* hpet memory map physical address */
+extern unsigned long hpet_address;
+extern unsigned long force_hpet_address;
+extern int hpet_force_user;
+extern int is_hpet_enabled(void);
+extern int hpet_enable(void);
+extern void hpet_disable(void);
+extern unsigned long hpet_readl(unsigned long a);
+extern void force_hpet_resume(void);
+
+extern void hpet_msi_unmask(unsigned int irq);
+extern void hpet_msi_mask(unsigned int irq);
+extern void hpet_msi_write(unsigned int irq, struct msi_msg *msg);
+extern void hpet_msi_read(unsigned int irq, struct msi_msg *msg);
+
+#ifdef CONFIG_PCI_MSI
+extern int arch_setup_hpet_msi(unsigned int irq);
+#else
+static inline int arch_setup_hpet_msi(unsigned int irq)
+{
+	return -EINVAL;
+}
+#endif
+
+#ifdef CONFIG_HPET_EMULATE_RTC
+
+#include <linux/interrupt.h>
+
+typedef irqreturn_t (*rtc_irq_handler)(int interrupt, void *cookie);
+extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask);
+extern int hpet_set_rtc_irq_bit(unsigned long bit_mask);
+extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min,
+			       unsigned char sec);
+extern int hpet_set_periodic_freq(unsigned long freq);
+extern int hpet_rtc_dropped_irq(void);
+extern int hpet_rtc_timer_init(void);
+extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id);
+extern int hpet_register_irq_handler(rtc_irq_handler handler);
+extern void hpet_unregister_irq_handler(rtc_irq_handler handler);
+
+#endif /* CONFIG_HPET_EMULATE_RTC */
+
+#else /* CONFIG_HPET_TIMER */
+
+static inline int hpet_enable(void) { return 0; }
+static inline int is_hpet_enabled(void) { return 0; }
+#define hpet_readl(a) 0
+
+#endif
+#endif /* _ASM_X86_HPET_H */
diff --git a/arch/x86/include/asm/hugetlb.h b/arch/x86/include/asm/hugetlb.h
new file mode 100644
index 0000000..439a9ac
--- /dev/null
+++ b/arch/x86/include/asm/hugetlb.h
@@ -0,0 +1,93 @@
+#ifndef _ASM_X86_HUGETLB_H
+#define _ASM_X86_HUGETLB_H
+
+#include <asm/page.h>
+
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+					 unsigned long addr,
+					 unsigned long len) {
+	return 0;
+}
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
+{
+	struct hstate *h = hstate_file(file);
+	if (len & ~huge_page_mask(h))
+		return -EINVAL;
+	if (addr & ~huge_page_mask(h))
+		return -EINVAL;
+	return 0;
+}
+
+static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) {
+}
+
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
+					  unsigned long addr, unsigned long end,
+					  unsigned long floor,
+					  unsigned long ceiling)
+{
+	free_pgd_range(tlb, addr, end, floor, ceiling);
+}
+
+static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+				   pte_t *ptep, pte_t pte)
+{
+	set_pte_at(mm, addr, ptep, pte);
+}
+
+static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+					    unsigned long addr, pte_t *ptep)
+{
+	return ptep_get_and_clear(mm, addr, ptep);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	return pte_wrprotect(pte);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty)
+{
+	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline int arch_prepare_hugepage(struct page *page)
+{
+	return 0;
+}
+
+static inline void arch_release_hugepage(struct page *page)
+{
+}
+
+#endif /* _ASM_X86_HUGETLB_H */
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
new file mode 100644
index 0000000..b97aecb
--- /dev/null
+++ b/arch/x86/include/asm/hw_irq.h
@@ -0,0 +1,131 @@
+#ifndef _ASM_X86_HW_IRQ_H
+#define _ASM_X86_HW_IRQ_H
+
+/*
+ * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ * moved some of the old arch/i386/kernel/irq.h to here. VY
+ *
+ * IRQ/IPI changes taken from work by Thomas Radke
+ * <tomsoft@informatik.tu-chemnitz.de>
+ *
+ * hacked by Andi Kleen for x86-64.
+ * unified by tglx
+ */
+
+#include <asm/irq_vectors.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/percpu.h>
+#include <linux/profile.h>
+#include <linux/smp.h>
+
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/sections.h>
+
+#define platform_legacy_irq(irq)	((irq) < 16)
+
+/* Interrupt handlers registered during init_IRQ */
+extern void apic_timer_interrupt(void);
+extern void error_interrupt(void);
+extern void spurious_interrupt(void);
+extern void thermal_interrupt(void);
+extern void reschedule_interrupt(void);
+
+extern void invalidate_interrupt(void);
+extern void invalidate_interrupt0(void);
+extern void invalidate_interrupt1(void);
+extern void invalidate_interrupt2(void);
+extern void invalidate_interrupt3(void);
+extern void invalidate_interrupt4(void);
+extern void invalidate_interrupt5(void);
+extern void invalidate_interrupt6(void);
+extern void invalidate_interrupt7(void);
+
+extern void irq_move_cleanup_interrupt(void);
+extern void threshold_interrupt(void);
+
+extern void call_function_interrupt(void);
+extern void call_function_single_interrupt(void);
+
+/* PIC specific functions */
+extern void disable_8259A_irq(unsigned int irq);
+extern void enable_8259A_irq(unsigned int irq);
+extern int i8259A_irq_pending(unsigned int irq);
+extern void make_8259A_irq(unsigned int irq);
+extern void init_8259A(int aeoi);
+
+/* IOAPIC */
+#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs))
+extern unsigned long io_apic_irqs;
+
+extern void init_VISWS_APIC_irqs(void);
+extern void setup_IO_APIC(void);
+extern void disable_IO_APIC(void);
+extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
+extern void setup_ioapic_dest(void);
+
+#ifdef CONFIG_X86_64
+extern void enable_IO_APIC(void);
+#endif
+
+/* IPI functions */
+#ifdef CONFIG_X86_32
+extern void send_IPI_self(int vector);
+#endif
+extern void send_IPI(int dest, int vector);
+
+/* Statistics */
+extern atomic_t irq_err_count;
+extern atomic_t irq_mis_count;
+
+/* EISA */
+extern void eisa_set_level_irq(unsigned int irq);
+
+/* Voyager functions */
+extern asmlinkage void vic_cpi_interrupt(void);
+extern asmlinkage void vic_sys_interrupt(void);
+extern asmlinkage void vic_cmn_interrupt(void);
+extern asmlinkage void qic_timer_interrupt(void);
+extern asmlinkage void qic_invalidate_interrupt(void);
+extern asmlinkage void qic_reschedule_interrupt(void);
+extern asmlinkage void qic_enable_irq_interrupt(void);
+extern asmlinkage void qic_call_function_interrupt(void);
+
+/* SMP */
+extern void smp_apic_timer_interrupt(struct pt_regs *);
+extern void smp_spurious_interrupt(struct pt_regs *);
+extern void smp_error_interrupt(struct pt_regs *);
+#ifdef CONFIG_X86_SMP
+extern void smp_reschedule_interrupt(struct pt_regs *);
+extern void smp_call_function_interrupt(struct pt_regs *);
+extern void smp_call_function_single_interrupt(struct pt_regs *);
+#ifdef CONFIG_X86_32
+extern void smp_invalidate_interrupt(struct pt_regs *);
+#else
+extern asmlinkage void smp_invalidate_interrupt(struct pt_regs *);
+#endif
+#endif
+
+#ifdef CONFIG_X86_32
+extern void (*const interrupt[NR_VECTORS])(void);
+#endif
+
+typedef int vector_irq_t[NR_VECTORS];
+DECLARE_PER_CPU(vector_irq_t, vector_irq);
+
+#ifdef CONFIG_X86_IO_APIC
+extern void lock_vector_lock(void);
+extern void unlock_vector_lock(void);
+extern void __setup_vector_irq(int cpu);
+#else
+static inline void lock_vector_lock(void) {}
+static inline void unlock_vector_lock(void) {}
+static inline void __setup_vector_irq(int cpu) {}
+#endif
+
+#endif /* !ASSEMBLY_ */
+
+#endif /* _ASM_X86_HW_IRQ_H */
diff --git a/arch/x86/include/asm/hypertransport.h b/arch/x86/include/asm/hypertransport.h
new file mode 100644
index 0000000..334b1a8
--- /dev/null
+++ b/arch/x86/include/asm/hypertransport.h
@@ -0,0 +1,45 @@
+#ifndef _ASM_X86_HYPERTRANSPORT_H
+#define _ASM_X86_HYPERTRANSPORT_H
+
+/*
+ * Constants for x86 Hypertransport Interrupts.
+ */
+
+#define HT_IRQ_LOW_BASE			0xf8000000
+
+#define HT_IRQ_LOW_VECTOR_SHIFT		16
+#define HT_IRQ_LOW_VECTOR_MASK		0x00ff0000
+#define HT_IRQ_LOW_VECTOR(v)						\
+	(((v) << HT_IRQ_LOW_VECTOR_SHIFT) & HT_IRQ_LOW_VECTOR_MASK)
+
+#define HT_IRQ_LOW_DEST_ID_SHIFT	8
+#define HT_IRQ_LOW_DEST_ID_MASK		0x0000ff00
+#define HT_IRQ_LOW_DEST_ID(v)						\
+	(((v) << HT_IRQ_LOW_DEST_ID_SHIFT) & HT_IRQ_LOW_DEST_ID_MASK)
+
+#define HT_IRQ_LOW_DM_PHYSICAL		0x0000000
+#define HT_IRQ_LOW_DM_LOGICAL		0x0000040
+
+#define HT_IRQ_LOW_RQEOI_EDGE		0x0000000
+#define HT_IRQ_LOW_RQEOI_LEVEL		0x0000020
+
+
+#define HT_IRQ_LOW_MT_FIXED		0x0000000
+#define HT_IRQ_LOW_MT_ARBITRATED	0x0000004
+#define HT_IRQ_LOW_MT_SMI		0x0000008
+#define HT_IRQ_LOW_MT_NMI		0x000000c
+#define HT_IRQ_LOW_MT_INIT		0x0000010
+#define HT_IRQ_LOW_MT_STARTUP		0x0000014
+#define HT_IRQ_LOW_MT_EXTINT		0x0000018
+#define HT_IRQ_LOW_MT_LINT1		0x000008c
+#define HT_IRQ_LOW_MT_LINT0		0x0000098
+
+#define HT_IRQ_LOW_IRQ_MASKED		0x0000001
+
+
+#define HT_IRQ_HIGH_DEST_ID_SHIFT	0
+#define HT_IRQ_HIGH_DEST_ID_MASK	0x00ffffff
+#define HT_IRQ_HIGH_DEST_ID(v)						\
+	((((v) >> 8) << HT_IRQ_HIGH_DEST_ID_SHIFT) & HT_IRQ_HIGH_DEST_ID_MASK)
+
+#endif /* _ASM_X86_HYPERTRANSPORT_H */
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
new file mode 100644
index 0000000..48f0004
--- /dev/null
+++ b/arch/x86/include/asm/i387.h
@@ -0,0 +1,400 @@
+/*
+ * Copyright (C) 1994 Linus Torvalds
+ *
+ * Pentium III FXSR, SSE support
+ * General FPU state handling cleanups
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ * x86-64 work by Andi Kleen 2002
+ */
+
+#ifndef _ASM_X86_I387_H
+#define _ASM_X86_I387_H
+
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/regset.h>
+#include <linux/hardirq.h>
+#include <asm/asm.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+#include <asm/user.h>
+#include <asm/uaccess.h>
+#include <asm/xsave.h>
+
+extern unsigned int sig_xstate_size;
+extern void fpu_init(void);
+extern void mxcsr_feature_mask_init(void);
+extern int init_fpu(struct task_struct *child);
+extern asmlinkage void math_state_restore(void);
+extern void init_thread_xstate(void);
+extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
+
+extern user_regset_active_fn fpregs_active, xfpregs_active;
+extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get;
+extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set;
+
+extern struct _fpx_sw_bytes fx_sw_reserved;
+#ifdef CONFIG_IA32_EMULATION
+extern unsigned int sig_xstate_ia32_size;
+extern struct _fpx_sw_bytes fx_sw_reserved_ia32;
+struct _fpstate_ia32;
+struct _xstate_ia32;
+extern int save_i387_xstate_ia32(void __user *buf);
+extern int restore_i387_xstate_ia32(void __user *buf);
+#endif
+
+#define X87_FSW_ES (1 << 7)	/* Exception Summary */
+
+#ifdef CONFIG_X86_64
+
+/* Ignore delayed exceptions from user space */
+static inline void tolerant_fwait(void)
+{
+	asm volatile("1: fwait\n"
+		     "2:\n"
+		     _ASM_EXTABLE(1b, 2b));
+}
+
+static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
+{
+	int err;
+
+	asm volatile("1:  rex64/fxrstor (%[fx])\n\t"
+		     "2:\n"
+		     ".section .fixup,\"ax\"\n"
+		     "3:  movl $-1,%[err]\n"
+		     "    jmp  2b\n"
+		     ".previous\n"
+		     _ASM_EXTABLE(1b, 3b)
+		     : [err] "=r" (err)
+#if 0 /* See comment in __save_init_fpu() below. */
+		     : [fx] "r" (fx), "m" (*fx), "0" (0));
+#else
+		     : [fx] "cdaSDb" (fx), "m" (*fx), "0" (0));
+#endif
+	return err;
+}
+
+static inline int restore_fpu_checking(struct task_struct *tsk)
+{
+	if (task_thread_info(tsk)->status & TS_XSAVE)
+		return xrstor_checking(&tsk->thread.xstate->xsave);
+	else
+		return fxrstor_checking(&tsk->thread.xstate->fxsave);
+}
+
+/* AMD CPUs don't save/restore FDP/FIP/FOP unless an exception
+   is pending. Clear the x87 state here by setting it to fixed
+   values. The kernel data segment can be sometimes 0 and sometimes
+   new user value. Both should be ok.
+   Use the PDA as safe address because it should be already in L1. */
+static inline void clear_fpu_state(struct task_struct *tsk)
+{
+	struct xsave_struct *xstate = &tsk->thread.xstate->xsave;
+	struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
+
+	/*
+	 * xsave header may indicate the init state of the FP.
+	 */
+	if ((task_thread_info(tsk)->status & TS_XSAVE) &&
+	    !(xstate->xsave_hdr.xstate_bv & XSTATE_FP))
+		return;
+
+	if (unlikely(fx->swd & X87_FSW_ES))
+		asm volatile("fnclex");
+	alternative_input(ASM_NOP8 ASM_NOP2,
+			  "    emms\n"		/* clear stack tags */
+			  "    fildl %%gs:0",	/* load to clear state */
+			  X86_FEATURE_FXSAVE_LEAK);
+}
+
+static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
+{
+	int err;
+
+	asm volatile("1:  rex64/fxsave (%[fx])\n\t"
+		     "2:\n"
+		     ".section .fixup,\"ax\"\n"
+		     "3:  movl $-1,%[err]\n"
+		     "    jmp  2b\n"
+		     ".previous\n"
+		     _ASM_EXTABLE(1b, 3b)
+		     : [err] "=r" (err), "=m" (*fx)
+#if 0 /* See comment in __fxsave_clear() below. */
+		     : [fx] "r" (fx), "0" (0));
+#else
+		     : [fx] "cdaSDb" (fx), "0" (0));
+#endif
+	if (unlikely(err) &&
+	    __clear_user(fx, sizeof(struct i387_fxsave_struct)))
+		err = -EFAULT;
+	/* No need to clear here because the caller clears USED_MATH */
+	return err;
+}
+
+static inline void fxsave(struct task_struct *tsk)
+{
+	/* Using "rex64; fxsave %0" is broken because, if the memory operand
+	   uses any extended registers for addressing, a second REX prefix
+	   will be generated (to the assembler, rex64 followed by semicolon
+	   is a separate instruction), and hence the 64-bitness is lost. */
+#if 0
+	/* Using "fxsaveq %0" would be the ideal choice, but is only supported
+	   starting with gas 2.16. */
+	__asm__ __volatile__("fxsaveq %0"
+			     : "=m" (tsk->thread.xstate->fxsave));
+#elif 0
+	/* Using, as a workaround, the properly prefixed form below isn't
+	   accepted by any binutils version so far released, complaining that
+	   the same type of prefix is used twice if an extended register is
+	   needed for addressing (fix submitted to mainline 2005-11-21). */
+	__asm__ __volatile__("rex64/fxsave %0"
+			     : "=m" (tsk->thread.xstate->fxsave));
+#else
+	/* This, however, we can work around by forcing the compiler to select
+	   an addressing mode that doesn't require extended registers. */
+	__asm__ __volatile__("rex64/fxsave (%1)"
+			     : "=m" (tsk->thread.xstate->fxsave)
+			     : "cdaSDb" (&tsk->thread.xstate->fxsave));
+#endif
+}
+
+static inline void __save_init_fpu(struct task_struct *tsk)
+{
+	if (task_thread_info(tsk)->status & TS_XSAVE)
+		xsave(tsk);
+	else
+		fxsave(tsk);
+
+	clear_fpu_state(tsk);
+	task_thread_info(tsk)->status &= ~TS_USEDFPU;
+}
+
+#else  /* CONFIG_X86_32 */
+
+extern void finit(void);
+
+static inline void tolerant_fwait(void)
+{
+	asm volatile("fnclex ; fwait");
+}
+
+static inline void restore_fpu(struct task_struct *tsk)
+{
+	if (task_thread_info(tsk)->status & TS_XSAVE) {
+		xrstor_checking(&tsk->thread.xstate->xsave);
+		return;
+	}
+	/*
+	 * The "nop" is needed to make the instructions the same
+	 * length.
+	 */
+	alternative_input(
+		"nop ; frstor %1",
+		"fxrstor %1",
+		X86_FEATURE_FXSR,
+		"m" (tsk->thread.xstate->fxsave));
+}
+
+/* We need a safe address that is cheap to find and that is already
+   in L1 during context switch. The best choices are unfortunately
+   different for UP and SMP */
+#ifdef CONFIG_SMP
+#define safe_address (__per_cpu_offset[0])
+#else
+#define safe_address (kstat_cpu(0).cpustat.user)
+#endif
+
+/*
+ * These must be called with preempt disabled
+ */
+static inline void __save_init_fpu(struct task_struct *tsk)
+{
+	if (task_thread_info(tsk)->status & TS_XSAVE) {
+		struct xsave_struct *xstate = &tsk->thread.xstate->xsave;
+		struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
+
+		xsave(tsk);
+
+		/*
+		 * xsave header may indicate the init state of the FP.
+		 */
+		if (!(xstate->xsave_hdr.xstate_bv & XSTATE_FP))
+			goto end;
+
+		if (unlikely(fx->swd & X87_FSW_ES))
+			asm volatile("fnclex");
+
+		/*
+		 * we can do a simple return here or be paranoid :)
+		 */
+		goto clear_state;
+	}
+
+	/* Use more nops than strictly needed in case the compiler
+	   varies code */
+	alternative_input(
+		"fnsave %[fx] ;fwait;" GENERIC_NOP8 GENERIC_NOP4,
+		"fxsave %[fx]\n"
+		"bt $7,%[fsw] ; jnc 1f ; fnclex\n1:",
+		X86_FEATURE_FXSR,
+		[fx] "m" (tsk->thread.xstate->fxsave),
+		[fsw] "m" (tsk->thread.xstate->fxsave.swd) : "memory");
+clear_state:
+	/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
+	   is pending.  Clear the x87 state here by setting it to fixed
+	   values. safe_address is a random variable that should be in L1 */
+	alternative_input(
+		GENERIC_NOP8 GENERIC_NOP2,
+		"emms\n\t"	  	/* clear stack tags */
+		"fildl %[addr]", 	/* set F?P to defined value */
+		X86_FEATURE_FXSAVE_LEAK,
+		[addr] "m" (safe_address));
+end:
+	task_thread_info(tsk)->status &= ~TS_USEDFPU;
+}
+
+#endif	/* CONFIG_X86_64 */
+
+/*
+ * Signal frame handlers...
+ */
+extern int save_i387_xstate(void __user *buf);
+extern int restore_i387_xstate(void __user *buf);
+
+static inline void __unlazy_fpu(struct task_struct *tsk)
+{
+	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+		__save_init_fpu(tsk);
+		stts();
+	} else
+		tsk->fpu_counter = 0;
+}
+
+static inline void __clear_fpu(struct task_struct *tsk)
+{
+	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+		tolerant_fwait();
+		task_thread_info(tsk)->status &= ~TS_USEDFPU;
+		stts();
+	}
+}
+
+static inline void kernel_fpu_begin(void)
+{
+	struct thread_info *me = current_thread_info();
+	preempt_disable();
+	if (me->status & TS_USEDFPU)
+		__save_init_fpu(me->task);
+	else
+		clts();
+}
+
+static inline void kernel_fpu_end(void)
+{
+	stts();
+	preempt_enable();
+}
+
+/*
+ * Some instructions like VIA's padlock instructions generate a spurious
+ * DNA fault but don't modify SSE registers. And these instructions
+ * get used from interrupt context aswell. To prevent these kernel instructions
+ * in interrupt context interact wrongly with other user/kernel fpu usage, we
+ * should use them only in the context of irq_ts_save/restore()
+ */
+static inline int irq_ts_save(void)
+{
+	/*
+	 * If we are in process context, we are ok to take a spurious DNA fault.
+	 * Otherwise, doing clts() in process context require pre-emption to
+	 * be disabled or some heavy lifting like kernel_fpu_begin()
+	 */
+	if (!in_interrupt())
+		return 0;
+
+	if (read_cr0() & X86_CR0_TS) {
+		clts();
+		return 1;
+	}
+
+	return 0;
+}
+
+static inline void irq_ts_restore(int TS_state)
+{
+	if (TS_state)
+		stts();
+}
+
+#ifdef CONFIG_X86_64
+
+static inline void save_init_fpu(struct task_struct *tsk)
+{
+	__save_init_fpu(tsk);
+	stts();
+}
+
+#define unlazy_fpu	__unlazy_fpu
+#define clear_fpu	__clear_fpu
+
+#else  /* CONFIG_X86_32 */
+
+/*
+ * These disable preemption on their own and are safe
+ */
+static inline void save_init_fpu(struct task_struct *tsk)
+{
+	preempt_disable();
+	__save_init_fpu(tsk);
+	stts();
+	preempt_enable();
+}
+
+static inline void unlazy_fpu(struct task_struct *tsk)
+{
+	preempt_disable();
+	__unlazy_fpu(tsk);
+	preempt_enable();
+}
+
+static inline void clear_fpu(struct task_struct *tsk)
+{
+	preempt_disable();
+	__clear_fpu(tsk);
+	preempt_enable();
+}
+
+#endif	/* CONFIG_X86_64 */
+
+/*
+ * i387 state interaction
+ */
+static inline unsigned short get_fpu_cwd(struct task_struct *tsk)
+{
+	if (cpu_has_fxsr) {
+		return tsk->thread.xstate->fxsave.cwd;
+	} else {
+		return (unsigned short)tsk->thread.xstate->fsave.cwd;
+	}
+}
+
+static inline unsigned short get_fpu_swd(struct task_struct *tsk)
+{
+	if (cpu_has_fxsr) {
+		return tsk->thread.xstate->fxsave.swd;
+	} else {
+		return (unsigned short)tsk->thread.xstate->fsave.swd;
+	}
+}
+
+static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk)
+{
+	if (cpu_has_xmm) {
+		return tsk->thread.xstate->fxsave.mxcsr;
+	} else {
+		return MXCSR_DEFAULT;
+	}
+}
+
+#endif /* _ASM_X86_I387_H */
diff --git a/arch/x86/include/asm/i8253.h b/arch/x86/include/asm/i8253.h
new file mode 100644
index 0000000..1edbf89
--- /dev/null
+++ b/arch/x86/include/asm/i8253.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_X86_I8253_H
+#define _ASM_X86_I8253_H
+
+/* i8253A PIT registers */
+#define PIT_MODE		0x43
+#define PIT_CH0			0x40
+#define PIT_CH2			0x42
+
+extern spinlock_t i8253_lock;
+
+extern struct clock_event_device *global_clock_event;
+
+extern void setup_pit_timer(void);
+
+#define inb_pit		inb_p
+#define outb_pit	outb_p
+
+#endif /* _ASM_X86_I8253_H */
diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h
new file mode 100644
index 0000000..58d7091
--- /dev/null
+++ b/arch/x86/include/asm/i8259.h
@@ -0,0 +1,63 @@
+#ifndef _ASM_X86_I8259_H
+#define _ASM_X86_I8259_H
+
+#include <linux/delay.h>
+
+extern unsigned int cached_irq_mask;
+
+#define __byte(x, y)		(((unsigned char *)&(y))[x])
+#define cached_master_mask	(__byte(0, cached_irq_mask))
+#define cached_slave_mask	(__byte(1, cached_irq_mask))
+
+/* i8259A PIC registers */
+#define PIC_MASTER_CMD		0x20
+#define PIC_MASTER_IMR		0x21
+#define PIC_MASTER_ISR		PIC_MASTER_CMD
+#define PIC_MASTER_POLL		PIC_MASTER_ISR
+#define PIC_MASTER_OCW3		PIC_MASTER_ISR
+#define PIC_SLAVE_CMD		0xa0
+#define PIC_SLAVE_IMR		0xa1
+
+/* i8259A PIC related value */
+#define PIC_CASCADE_IR		2
+#define MASTER_ICW4_DEFAULT	0x01
+#define SLAVE_ICW4_DEFAULT	0x01
+#define PIC_ICW4_AEOI		2
+
+extern spinlock_t i8259A_lock;
+
+extern void init_8259A(int auto_eoi);
+extern void enable_8259A_irq(unsigned int irq);
+extern void disable_8259A_irq(unsigned int irq);
+extern unsigned int startup_8259A_irq(unsigned int irq);
+
+/* the PIC may need a careful delay on some platforms, hence specific calls */
+static inline unsigned char inb_pic(unsigned int port)
+{
+	unsigned char value = inb(port);
+
+	/*
+	 * delay for some accesses to PIC on motherboard or in chipset
+	 * must be at least one microsecond, so be safe here:
+	 */
+	udelay(2);
+
+	return value;
+}
+
+static inline void outb_pic(unsigned char value, unsigned int port)
+{
+	outb(value, port);
+	/*
+	 * delay for some accesses to PIC on motherboard or in chipset
+	 * must be at least one microsecond, so be safe here:
+	 */
+	udelay(2);
+}
+
+extern struct irq_chip i8259A_chip;
+
+extern void mask_8259A(void);
+extern void unmask_8259A(void);
+
+#endif /* _ASM_X86_I8259_H */
diff --git a/arch/x86/include/asm/ia32.h b/arch/x86/include/asm/ia32.h
new file mode 100644
index 0000000..97989c0
--- /dev/null
+++ b/arch/x86/include/asm/ia32.h
@@ -0,0 +1,170 @@
+#ifndef _ASM_X86_IA32_H
+#define _ASM_X86_IA32_H
+
+
+#ifdef CONFIG_IA32_EMULATION
+
+#include <linux/compat.h>
+
+/*
+ * 32 bit structures for IA32 support.
+ */
+
+#include <asm/sigcontext32.h>
+
+/* signal.h */
+struct sigaction32 {
+	unsigned int  sa_handler;	/* Really a pointer, but need to deal
+					   with 32 bits */
+	unsigned int sa_flags;
+	unsigned int sa_restorer;	/* Another 32 bit pointer */
+	compat_sigset_t sa_mask;	/* A 32 bit mask */
+};
+
+struct old_sigaction32 {
+	unsigned int  sa_handler;	/* Really a pointer, but need to deal
+					   with 32 bits */
+	compat_old_sigset_t sa_mask;	/* A 32 bit mask */
+	unsigned int sa_flags;
+	unsigned int sa_restorer;	/* Another 32 bit pointer */
+};
+
+typedef struct sigaltstack_ia32 {
+	unsigned int	ss_sp;
+	int		ss_flags;
+	unsigned int	ss_size;
+} stack_ia32_t;
+
+struct ucontext_ia32 {
+	unsigned int	  uc_flags;
+	unsigned int 	  uc_link;
+	stack_ia32_t	  uc_stack;
+	struct sigcontext_ia32 uc_mcontext;
+	compat_sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+/* This matches struct stat64 in glibc2.2, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char		__pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned int		__st_ino;
+
+	unsigned int		st_mode;
+	unsigned int		st_nlink;
+
+	unsigned int		st_uid;
+	unsigned int		st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char		__pad3[4];
+
+	long long		st_size;
+	unsigned int		st_blksize;
+
+	long long		st_blocks;/* Number 512-byte blocks allocated */
+
+	unsigned 		st_atime;
+	unsigned 		st_atime_nsec;
+	unsigned 		st_mtime;
+	unsigned 		st_mtime_nsec;
+	unsigned 		st_ctime;
+	unsigned 		st_ctime_nsec;
+
+	unsigned long long	st_ino;
+} __attribute__((packed));
+
+typedef struct compat_siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+
+	union {
+		int _pad[((128 / sizeof(int)) - 3)];
+
+		/* kill() */
+		struct {
+			unsigned int _pid;	/* sender's pid */
+			unsigned int _uid;	/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			compat_timer_t _tid;	/* timer id */
+			int _overrun;		/* overrun count */
+			compat_sigval_t _sigval;	/* same as below */
+			int _sys_private;	/* not to be passed to user */
+			int _overrun_incr;	/* amount to add to overrun */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			unsigned int _pid;	/* sender's pid */
+			unsigned int _uid;	/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			unsigned int _pid;	/* which child */
+			unsigned int _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			compat_clock_t _utime;
+			compat_clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			unsigned int _addr;	/* faulting insn/memory ref. */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} compat_siginfo_t;
+
+struct sigframe32 {
+	u32 pretcode;
+	int sig;
+	struct sigcontext_ia32 sc;
+	struct _fpstate_ia32 fpstate;
+	unsigned int extramask[_COMPAT_NSIG_WORDS-1];
+};
+
+struct rt_sigframe32 {
+	u32 pretcode;
+	int sig;
+	u32 pinfo;
+	u32 puc;
+	compat_siginfo_t info;
+	struct ucontext_ia32 uc;
+	struct _fpstate_ia32 fpstate;
+};
+
+struct ustat32 {
+	__u32			f_tfree;
+	compat_ino_t		f_tinode;
+	char			f_fname[6];
+	char			f_fpack[6];
+};
+
+#define IA32_STACK_TOP IA32_PAGE_OFFSET
+
+#ifdef __KERNEL__
+struct linux_binprm;
+extern int ia32_setup_arg_pages(struct linux_binprm *bprm,
+				unsigned long stack_top, int exec_stack);
+struct mm_struct;
+extern void ia32_pick_mmap_layout(struct mm_struct *mm);
+
+#endif
+
+#endif /* !CONFIG_IA32_SUPPORT */
+
+#endif /* _ASM_X86_IA32_H */
diff --git a/arch/x86/include/asm/ia32_unistd.h b/arch/x86/include/asm/ia32_unistd.h
new file mode 100644
index 0000000..976f6ec
--- /dev/null
+++ b/arch/x86/include/asm/ia32_unistd.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_X86_IA32_UNISTD_H
+#define _ASM_X86_IA32_UNISTD_H
+
+/*
+ * This file contains the system call numbers of the ia32 port,
+ * this is for the kernel only.
+ * Only add syscalls here where some part of the kernel needs to know
+ * the number. This should be otherwise in sync with asm-x86/unistd_32.h. -AK
+ */
+
+#define __NR_ia32_restart_syscall 0
+#define __NR_ia32_exit		  1
+#define __NR_ia32_read		  3
+#define __NR_ia32_write		  4
+#define __NR_ia32_sigreturn	119
+#define __NR_ia32_rt_sigreturn	173
+
+#endif /* _ASM_X86_IA32_UNISTD_H */
diff --git a/arch/x86/include/asm/idle.h b/arch/x86/include/asm/idle.h
new file mode 100644
index 0000000..44c89c3
--- /dev/null
+++ b/arch/x86/include/asm/idle.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_X86_IDLE_H
+#define _ASM_X86_IDLE_H
+
+#define IDLE_START 1
+#define IDLE_END 2
+
+struct notifier_block;
+void idle_notifier_register(struct notifier_block *n);
+void idle_notifier_unregister(struct notifier_block *n);
+
+void enter_idle(void);
+void exit_idle(void);
+
+void c1e_remove_cpu(int cpu);
+
+#endif /* _ASM_X86_IDLE_H */
diff --git a/arch/x86/include/asm/intel_arch_perfmon.h b/arch/x86/include/asm/intel_arch_perfmon.h
new file mode 100644
index 0000000..fa0fd06
--- /dev/null
+++ b/arch/x86/include/asm/intel_arch_perfmon.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_X86_INTEL_ARCH_PERFMON_H
+#define _ASM_X86_INTEL_ARCH_PERFMON_H
+
+#define MSR_ARCH_PERFMON_PERFCTR0		0xc1
+#define MSR_ARCH_PERFMON_PERFCTR1		0xc2
+
+#define MSR_ARCH_PERFMON_EVENTSEL0		0x186
+#define MSR_ARCH_PERFMON_EVENTSEL1		0x187
+
+#define ARCH_PERFMON_EVENTSEL0_ENABLE	(1 << 22)
+#define ARCH_PERFMON_EVENTSEL_INT	(1 << 20)
+#define ARCH_PERFMON_EVENTSEL_OS	(1 << 17)
+#define ARCH_PERFMON_EVENTSEL_USR	(1 << 16)
+
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL	(0x3c)
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK	(0x00 << 8)
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX (0)
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT \
+	(1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX))
+
+union cpuid10_eax {
+	struct {
+		unsigned int version_id:8;
+		unsigned int num_counters:8;
+		unsigned int bit_width:8;
+		unsigned int mask_length:8;
+	} split;
+	unsigned int full;
+};
+
+#endif /* _ASM_X86_INTEL_ARCH_PERFMON_H */
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
new file mode 100644
index 0000000..5618a10
--- /dev/null
+++ b/arch/x86/include/asm/io.h
@@ -0,0 +1,91 @@
+#ifndef _ASM_X86_IO_H
+#define _ASM_X86_IO_H
+
+#define ARCH_HAS_IOREMAP_WC
+
+#include <linux/compiler.h>
+
+#define build_mmio_read(name, size, type, reg, barrier) \
+static inline type name(const volatile void __iomem *addr) \
+{ type ret; asm volatile("mov" size " %1,%0":reg (ret) \
+:"m" (*(volatile type __force *)addr) barrier); return ret; }
+
+#define build_mmio_write(name, size, type, reg, barrier) \
+static inline void name(type val, volatile void __iomem *addr) \
+{ asm volatile("mov" size " %0,%1": :reg (val), \
+"m" (*(volatile type __force *)addr) barrier); }
+
+build_mmio_read(readb, "b", unsigned char, "=q", :"memory")
+build_mmio_read(readw, "w", unsigned short, "=r", :"memory")
+build_mmio_read(readl, "l", unsigned int, "=r", :"memory")
+
+build_mmio_read(__readb, "b", unsigned char, "=q", )
+build_mmio_read(__readw, "w", unsigned short, "=r", )
+build_mmio_read(__readl, "l", unsigned int, "=r", )
+
+build_mmio_write(writeb, "b", unsigned char, "q", :"memory")
+build_mmio_write(writew, "w", unsigned short, "r", :"memory")
+build_mmio_write(writel, "l", unsigned int, "r", :"memory")
+
+build_mmio_write(__writeb, "b", unsigned char, "q", )
+build_mmio_write(__writew, "w", unsigned short, "r", )
+build_mmio_write(__writel, "l", unsigned int, "r", )
+
+#define readb_relaxed(a) __readb(a)
+#define readw_relaxed(a) __readw(a)
+#define readl_relaxed(a) __readl(a)
+#define __raw_readb __readb
+#define __raw_readw __readw
+#define __raw_readl __readl
+
+#define __raw_writeb __writeb
+#define __raw_writew __writew
+#define __raw_writel __writel
+
+#define mmiowb() barrier()
+
+#ifdef CONFIG_X86_64
+build_mmio_read(readq, "q", unsigned long, "=r", :"memory")
+build_mmio_read(__readq, "q", unsigned long, "=r", )
+build_mmio_write(writeq, "q", unsigned long, "r", :"memory")
+build_mmio_write(__writeq, "q", unsigned long, "r", )
+
+#define readq_relaxed(a) __readq(a)
+#define __raw_readq __readq
+#define __raw_writeq writeq
+
+/* Let people know we have them */
+#define readq readq
+#define writeq writeq
+#endif
+
+extern int iommu_bio_merge;
+
+#ifdef CONFIG_X86_32
+# include "io_32.h"
+#else
+# include "io_64.h"
+#endif
+
+extern void *xlate_dev_mem_ptr(unsigned long phys);
+extern void unxlate_dev_mem_ptr(unsigned long phys, void *addr);
+
+extern int ioremap_change_attr(unsigned long vaddr, unsigned long size,
+				unsigned long prot_val);
+extern void __iomem *ioremap_wc(unsigned long offset, unsigned long size);
+
+/*
+ * early_ioremap() and early_iounmap() are for temporary early boot-time
+ * mappings, before the real ioremap() is functional.
+ * A boot-time mapping is currently limited to at most 16 pages.
+ */
+extern void early_ioremap_init(void);
+extern void early_ioremap_clear(void);
+extern void early_ioremap_reset(void);
+extern void *early_ioremap(unsigned long offset, unsigned long size);
+extern void *early_memremap(unsigned long offset, unsigned long size);
+extern void early_iounmap(void *addr, unsigned long size);
+extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
+
+
+#endif /* _ASM_X86_IO_H */
diff --git a/arch/x86/include/asm/io_32.h b/arch/x86/include/asm/io_32.h
new file mode 100644
index 0000000..d8e242e
--- /dev/null
+++ b/arch/x86/include/asm/io_32.h
@@ -0,0 +1,284 @@
+#ifndef _ASM_X86_IO_32_H
+#define _ASM_X86_IO_32_H
+
+#include <linux/string.h>
+#include <linux/compiler.h>
+
+/*
+ * This file contains the definitions for the x86 IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated
+ * to (a) handle it all in a way that makes gcc able to optimize it
+ * as well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ */
+
+/*
+ * Thanks to James van Artsdalen for a better timing-fix than
+ * the two short jumps: using outb's to a nonexistent port seems
+ * to guarantee better timings even on fast machines.
+ *
+ * On the other hand, I'd like to be sure of a non-existent port:
+ * I feel a bit unsafe about using 0x80 (should be safe, though)
+ *
+ *		Linus
+ */
+
+ /*
+  *  Bit simplified and optimized by Jan Hubicka
+  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
+  *
+  *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
+  *  isa_read[wl] and isa_write[wl] fixed
+  *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+  */
+
+#define IO_SPACE_LIMIT 0xffff
+
+#define XQUAD_PORTIO_BASE 0xfe400000
+#define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
+
+#ifdef __KERNEL__
+
+#include <asm-generic/iomap.h>
+
+#include <linux/vmalloc.h>
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+/**
+ *	virt_to_phys	-	map virtual addresses to physical
+ *	@address: address to remap
+ *
+ *	The returned physical address is the physical (CPU) mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses directly mapped or allocated via kmalloc.
+ *
+ *	This function does not give bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+	return __pa(address);
+}
+
+/**
+ *	phys_to_virt	-	map physical address to virtual
+ *	@address: address to remap
+ *
+ *	The returned virtual address is a current CPU mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses that have a kernel mapping
+ *
+ *	This function does not handle bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+
+static inline void *phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+/**
+ * ioremap     -   map bus memory into CPU space
+ * @offset:    bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * If the area you are trying to map is a PCI BAR you should have a
+ * look at pci_iomap().
+ */
+extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
+				unsigned long prot_val);
+
+/*
+ * The default ioremap() behavior is non-cached:
+ */
+static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
+{
+	return ioremap_nocache(offset, size);
+}
+
+extern void iounmap(volatile void __iomem *addr);
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+#define isa_virt_to_bus virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them on x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+static inline void
+memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+	memset((void __force *)addr, val, count);
+}
+
+static inline void
+memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+	__memcpy(dst, (const void __force *)src, count);
+}
+
+static inline void
+memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+	__memcpy((void __force *)dst, src, count);
+}
+
+/*
+ * ISA space is 'always mapped' on a typical x86 system, no need to
+ * explicitly ioremap() it. The fact that the ISA IO space is mapped
+ * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
+ * are physical addresses. The following constant pointer can be
+ * used as the IO-area pointer (it can be iounmapped as well, so the
+ * analogy with PCI is quite large):
+ */
+#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
+
+/*
+ *	Cache management
+ *
+ *	This needed for two cases
+ *	1. Out of order aware processors
+ *	2. Accidentally out of order processors (PPro errata #51)
+ */
+
+#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE)
+
+static inline void flush_write_buffers(void)
+{
+	asm volatile("lock; addl $0,0(%%esp)": : :"memory");
+}
+
+#else
+
+#define flush_write_buffers() do { } while (0)
+
+#endif
+
+#endif /* __KERNEL__ */
+
+extern void native_io_delay(void);
+
+extern int io_delay_type;
+extern void io_delay_init(void);
+
+#if defined(CONFIG_PARAVIRT)
+#include <asm/paravirt.h>
+#else
+
+static inline void slow_down_io(void)
+{
+	native_io_delay();
+#ifdef REALLY_SLOW_IO
+	native_io_delay();
+	native_io_delay();
+	native_io_delay();
+#endif
+}
+
+#endif
+
+#define __BUILDIO(bwl, bw, type)				\
+static inline void out##bwl(unsigned type value, int port)	\
+{								\
+	out##bwl##_local(value, port);				\
+}								\
+								\
+static inline unsigned type in##bwl(int port)			\
+{								\
+	return in##bwl##_local(port);				\
+}
+
+#define BUILDIO(bwl, bw, type)						\
+static inline void out##bwl##_local(unsigned type value, int port)	\
+{									\
+	asm volatile("out" #bwl " %" #bw "0, %w1"		\
+		     : : "a"(value), "Nd"(port));			\
+}									\
+									\
+static inline unsigned type in##bwl##_local(int port)			\
+{									\
+	unsigned type value;						\
+	asm volatile("in" #bwl " %w1, %" #bw "0"		\
+		     : "=a"(value) : "Nd"(port));			\
+	return value;							\
+}									\
+									\
+static inline void out##bwl##_local_p(unsigned type value, int port)	\
+{									\
+	out##bwl##_local(value, port);					\
+	slow_down_io();							\
+}									\
+									\
+static inline unsigned type in##bwl##_local_p(int port)			\
+{									\
+	unsigned type value = in##bwl##_local(port);			\
+	slow_down_io();							\
+	return value;							\
+}									\
+									\
+__BUILDIO(bwl, bw, type)						\
+									\
+static inline void out##bwl##_p(unsigned type value, int port)		\
+{									\
+	out##bwl(value, port);						\
+	slow_down_io();							\
+}									\
+									\
+static inline unsigned type in##bwl##_p(int port)			\
+{									\
+	unsigned type value = in##bwl(port);				\
+	slow_down_io();							\
+	return value;							\
+}									\
+									\
+static inline void outs##bwl(int port, const void *addr, unsigned long count) \
+{									\
+	asm volatile("rep; outs" #bwl					\
+		     : "+S"(addr), "+c"(count) : "d"(port));		\
+}									\
+									\
+static inline void ins##bwl(int port, void *addr, unsigned long count)	\
+{									\
+	asm volatile("rep; ins" #bwl					\
+		     : "+D"(addr), "+c"(count) : "d"(port));		\
+}
+
+BUILDIO(b, b, char)
+BUILDIO(w, w, short)
+BUILDIO(l, , int)
+
+#endif /* _ASM_X86_IO_32_H */
diff --git a/arch/x86/include/asm/io_64.h b/arch/x86/include/asm/io_64.h
new file mode 100644
index 0000000..fea325a
--- /dev/null
+++ b/arch/x86/include/asm/io_64.h
@@ -0,0 +1,244 @@
+#ifndef _ASM_X86_IO_64_H
+#define _ASM_X86_IO_64_H
+
+
+/*
+ * This file contains the definitions for the x86 IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated
+ * to (a) handle it all in a way that makes gcc able to optimize it
+ * as well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ */
+
+/*
+ * Thanks to James van Artsdalen for a better timing-fix than
+ * the two short jumps: using outb's to a nonexistent port seems
+ * to guarantee better timings even on fast machines.
+ *
+ * On the other hand, I'd like to be sure of a non-existent port:
+ * I feel a bit unsafe about using 0x80 (should be safe, though)
+ *
+ *		Linus
+ */
+
+ /*
+  *  Bit simplified and optimized by Jan Hubicka
+  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
+  *
+  *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
+  *  isa_read[wl] and isa_write[wl] fixed
+  *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+  */
+
+extern void native_io_delay(void);
+
+extern int io_delay_type;
+extern void io_delay_init(void);
+
+#if defined(CONFIG_PARAVIRT)
+#include <asm/paravirt.h>
+#else
+
+static inline void slow_down_io(void)
+{
+	native_io_delay();
+#ifdef REALLY_SLOW_IO
+	native_io_delay();
+	native_io_delay();
+	native_io_delay();
+#endif
+}
+#endif
+
+/*
+ * Talk about misusing macros..
+ */
+#define __OUT1(s, x)							\
+static inline void out##s(unsigned x value, unsigned short port) {
+
+#define __OUT2(s, s1, s2)				\
+asm volatile ("out" #s " %" s1 "0,%" s2 "1"
+
+#ifndef REALLY_SLOW_IO
+#define REALLY_SLOW_IO
+#define UNSET_REALLY_SLOW_IO
+#endif
+
+#define __OUT(s, s1, x)							\
+	__OUT1(s, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port));	\
+	}								\
+	__OUT1(s##_p, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \
+	slow_down_io();							\
+}
+
+#define __IN1(s)							\
+static inline RETURN_TYPE in##s(unsigned short port)			\
+{									\
+	RETURN_TYPE _v;
+
+#define __IN2(s, s1, s2)						\
+	asm volatile ("in" #s " %" s2 "1,%" s1 "0"
+
+#define __IN(s, s1, i...)						\
+	__IN1(s) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i);	\
+	return _v;							\
+	}								\
+	__IN1(s##_p) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i);	\
+	slow_down_io(); \
+	return _v; }
+
+#ifdef UNSET_REALLY_SLOW_IO
+#undef REALLY_SLOW_IO
+#endif
+
+#define __INS(s)							\
+static inline void ins##s(unsigned short port, void *addr,		\
+			  unsigned long count)				\
+{									\
+	asm volatile ("rep ; ins" #s					\
+		      : "=D" (addr), "=c" (count)			\
+		      : "d" (port), "0" (addr), "1" (count));		\
+}
+
+#define __OUTS(s)							\
+static inline void outs##s(unsigned short port, const void *addr,	\
+			   unsigned long count)				\
+{									\
+	asm volatile ("rep ; outs" #s					\
+		      : "=S" (addr), "=c" (count)			\
+		      : "d" (port), "0" (addr), "1" (count));		\
+}
+
+#define RETURN_TYPE unsigned char
+__IN(b, "")
+#undef RETURN_TYPE
+#define RETURN_TYPE unsigned short
+__IN(w, "")
+#undef RETURN_TYPE
+#define RETURN_TYPE unsigned int
+__IN(l, "")
+#undef RETURN_TYPE
+
+__OUT(b, "b", char)
+__OUT(w, "w", short)
+__OUT(l, , int)
+
+__INS(b)
+__INS(w)
+__INS(l)
+
+__OUTS(b)
+__OUTS(w)
+__OUTS(l)
+
+#define IO_SPACE_LIMIT 0xffff
+
+#if defined(__KERNEL__) && defined(__x86_64__)
+
+#include <linux/vmalloc.h>
+
+#ifndef __i386__
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+	return __pa(address);
+}
+
+static inline void *phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+#endif
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+#include <asm-generic/iomap.h>
+
+/*
+ * This one maps high address device memory and turns off caching for that area.
+ * it's useful if some control registers are in such an area and write combining
+ * or read caching is not desirable:
+ */
+extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
+				unsigned long prot_val);
+
+/*
+ * The default ioremap() behavior is non-cached:
+ */
+static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
+{
+	return ioremap_nocache(offset, size);
+}
+
+extern void iounmap(volatile void __iomem *addr);
+
+extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+#define isa_virt_to_bus virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them on x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+void __memcpy_fromio(void *, unsigned long, unsigned);
+void __memcpy_toio(unsigned long, const void *, unsigned);
+
+static inline void memcpy_fromio(void *to, const volatile void __iomem *from,
+				 unsigned len)
+{
+	__memcpy_fromio(to, (unsigned long)from, len);
+}
+
+static inline void memcpy_toio(volatile void __iomem *to, const void *from,
+			       unsigned len)
+{
+	__memcpy_toio((unsigned long)to, from, len);
+}
+
+void memset_io(volatile void __iomem *a, int b, size_t c);
+
+/*
+ * ISA space is 'always mapped' on a typical x86 system, no need to
+ * explicitly ioremap() it. The fact that the ISA IO space is mapped
+ * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
+ * are physical addresses. The following constant pointer can be
+ * used as the IO-area pointer (it can be iounmapped as well, so the
+ * analogy with PCI is quite large):
+ */
+#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
+
+#define flush_write_buffers()
+
+#define BIO_VMERGE_BOUNDARY iommu_bio_merge
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_IO_64_H */
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
new file mode 100644
index 0000000..6afd993
--- /dev/null
+++ b/arch/x86/include/asm/io_apic.h
@@ -0,0 +1,204 @@
+#ifndef _ASM_X86_IO_APIC_H
+#define _ASM_X86_IO_APIC_H
+
+#include <linux/types.h>
+#include <asm/mpspec.h>
+#include <asm/apicdef.h>
+#include <asm/irq_vectors.h>
+
+/*
+ * Intel IO-APIC support for SMP and UP systems.
+ *
+ * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar
+ */
+
+/* I/O Unit Redirection Table */
+#define IO_APIC_REDIR_VECTOR_MASK	0x000FF
+#define IO_APIC_REDIR_DEST_LOGICAL	0x00800
+#define IO_APIC_REDIR_DEST_PHYSICAL	0x00000
+#define IO_APIC_REDIR_SEND_PENDING	(1 << 12)
+#define IO_APIC_REDIR_REMOTE_IRR	(1 << 14)
+#define IO_APIC_REDIR_LEVEL_TRIGGER	(1 << 15)
+#define IO_APIC_REDIR_MASKED		(1 << 16)
+
+/*
+ * The structure of the IO-APIC:
+ */
+union IO_APIC_reg_00 {
+	u32	raw;
+	struct {
+		u32	__reserved_2	: 14,
+			LTS		:  1,
+			delivery_type	:  1,
+			__reserved_1	:  8,
+			ID		:  8;
+	} __attribute__ ((packed)) bits;
+};
+
+union IO_APIC_reg_01 {
+	u32	raw;
+	struct {
+		u32	version		:  8,
+			__reserved_2	:  7,
+			PRQ		:  1,
+			entries		:  8,
+			__reserved_1	:  8;
+	} __attribute__ ((packed)) bits;
+};
+
+union IO_APIC_reg_02 {
+	u32	raw;
+	struct {
+		u32	__reserved_2	: 24,
+			arbitration	:  4,
+			__reserved_1	:  4;
+	} __attribute__ ((packed)) bits;
+};
+
+union IO_APIC_reg_03 {
+	u32	raw;
+	struct {
+		u32	boot_DT		:  1,
+			__reserved_1	: 31;
+	} __attribute__ ((packed)) bits;
+};
+
+enum ioapic_irq_destination_types {
+	dest_Fixed = 0,
+	dest_LowestPrio = 1,
+	dest_SMI = 2,
+	dest__reserved_1 = 3,
+	dest_NMI = 4,
+	dest_INIT = 5,
+	dest__reserved_2 = 6,
+	dest_ExtINT = 7
+};
+
+struct IO_APIC_route_entry {
+	__u32	vector		:  8,
+		delivery_mode	:  3,	/* 000: FIXED
+					 * 001: lowest prio
+					 * 111: ExtINT
+					 */
+		dest_mode	:  1,	/* 0: physical, 1: logical */
+		delivery_status	:  1,
+		polarity	:  1,
+		irr		:  1,
+		trigger		:  1,	/* 0: edge, 1: level */
+		mask		:  1,	/* 0: enabled, 1: disabled */
+		__reserved_2	: 15;
+
+	__u32	__reserved_3	: 24,
+		dest		:  8;
+} __attribute__ ((packed));
+
+struct IR_IO_APIC_route_entry {
+	__u64	vector		: 8,
+		zero		: 3,
+		index2		: 1,
+		delivery_status : 1,
+		polarity	: 1,
+		irr		: 1,
+		trigger		: 1,
+		mask		: 1,
+		reserved	: 31,
+		format		: 1,
+		index		: 15;
+} __attribute__ ((packed));
+
+#ifdef CONFIG_X86_IO_APIC
+
+/*
+ * # of IO-APICs and # of IRQ routing registers
+ */
+extern int nr_ioapics;
+extern int nr_ioapic_registers[MAX_IO_APICS];
+
+/*
+ * MP-BIOS irq configuration table structures:
+ */
+
+#define MP_MAX_IOAPIC_PIN 127
+
+struct mp_config_ioapic {
+	unsigned long mp_apicaddr;
+	unsigned int mp_apicid;
+	unsigned char mp_type;
+	unsigned char mp_apicver;
+	unsigned char mp_flags;
+};
+
+struct mp_config_intsrc {
+	unsigned int mp_dstapic;
+	unsigned char mp_type;
+	unsigned char mp_irqtype;
+	unsigned short mp_irqflag;
+	unsigned char mp_srcbus;
+	unsigned char mp_srcbusirq;
+	unsigned char mp_dstirq;
+};
+
+/* I/O APIC entries */
+extern struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
+
+/* # of MP IRQ source entries */
+extern int mp_irq_entries;
+
+/* MP IRQ source entries */
+extern struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+
+/* non-0 if default (table-less) MP configuration */
+extern int mpc_default_type;
+
+/* Older SiS APIC requires we rewrite the index register */
+extern int sis_apic_bug;
+
+/* 1 if "noapic" boot option passed */
+extern int skip_ioapic_setup;
+
+/* 1 if the timer IRQ uses the '8259A Virtual Wire' mode */
+extern int timer_through_8259;
+
+static inline void disable_ioapic_setup(void)
+{
+	skip_ioapic_setup = 1;
+}
+
+/*
+ * If we use the IO-APIC for IRQ routing, disable automatic
+ * assignment of PCI IRQ's.
+ */
+#define io_apic_assign_pci_irqs \
+	(mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
+
+#ifdef CONFIG_ACPI
+extern int io_apic_get_unique_id(int ioapic, int apic_id);
+extern int io_apic_get_version(int ioapic);
+extern int io_apic_get_redir_entries(int ioapic);
+extern int io_apic_set_pci_routing(int ioapic, int pin, int irq,
+				   int edge_level, int active_high_low);
+#endif /* CONFIG_ACPI */
+
+extern int (*ioapic_renumber_irq)(int ioapic, int irq);
+extern void ioapic_init_mappings(void);
+
+#ifdef CONFIG_X86_64
+extern int save_mask_IO_APIC_setup(void);
+extern void restore_IO_APIC_setup(void);
+extern void reinit_intr_remapped_IO_APIC(int);
+#endif
+
+extern int probe_nr_irqs(void);
+
+#else  /* !CONFIG_X86_IO_APIC */
+#define io_apic_assign_pci_irqs 0
+static const int timer_through_8259 = 0;
+static inline void ioapic_init_mappings(void) { }
+
+static inline int probe_nr_irqs(void)
+{
+	return NR_IRQS;
+}
+#endif
+
+#endif /* _ASM_X86_IO_APIC_H */
diff --git a/include/asm-x86/ioctl.h b/arch/x86/include/asm/ioctl.h
similarity index 100%
rename from include/asm-x86/ioctl.h
rename to arch/x86/include/asm/ioctl.h
diff --git a/arch/x86/include/asm/ioctls.h b/arch/x86/include/asm/ioctls.h
new file mode 100644
index 0000000..0d5b23b7
--- /dev/null
+++ b/arch/x86/include/asm/ioctls.h
@@ -0,0 +1,94 @@
+#ifndef _ASM_X86_IOCTLS_H
+#define _ASM_X86_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T', 0x2A, struct termios2)
+#define TCSETS2		_IOW('T', 0x2B, struct termios2)
+#define TCSETSW2	_IOW('T', 0x2C, struct termios2)
+#define TCSETSF2	_IOW('T', 0x2D, struct termios2)
+#define TIOCGRS485	0x542E
+#define TIOCSRS485	0x542F
+#define TIOCGPTN	_IOR('T', 0x30, unsigned int)
+				/* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
+#define TCGETX		0x5432 /* SYS5 TCGETX compatibility */
+#define TCSETX		0x5433
+#define TCSETXF		0x5434
+#define TCSETXW		0x5435
+
+#define FIONCLEX	0x5450
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE	0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* _ASM_X86_IOCTLS_H */
diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h
new file mode 100644
index 0000000..98e28ea
--- /dev/null
+++ b/arch/x86/include/asm/iommu.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_X86_IOMMU_H
+#define _ASM_X86_IOMMU_H
+
+extern void pci_iommu_shutdown(void);
+extern void no_iommu_init(void);
+extern struct dma_mapping_ops nommu_dma_ops;
+extern int force_iommu, no_iommu;
+extern int iommu_detected;
+extern int dmar_disabled;
+extern int forbid_dac;
+
+extern unsigned long iommu_nr_pages(unsigned long addr, unsigned long len);
+
+/* 10 seconds */
+#define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000)
+
+#ifdef CONFIG_GART_IOMMU
+extern int gart_iommu_aperture;
+extern int gart_iommu_aperture_allowed;
+extern int gart_iommu_aperture_disabled;
+
+extern void early_gart_iommu_check(void);
+extern void gart_iommu_init(void);
+extern void gart_iommu_shutdown(void);
+extern void __init gart_parse_options(char *);
+extern void gart_iommu_hole_init(void);
+
+#else
+#define gart_iommu_aperture            0
+#define gart_iommu_aperture_allowed    0
+#define gart_iommu_aperture_disabled   1
+
+static inline void early_gart_iommu_check(void)
+{
+}
+static inline void gart_iommu_init(void)
+{
+}
+static inline void gart_iommu_shutdown(void)
+{
+}
+static inline void gart_parse_options(char *options)
+{
+}
+static inline void gart_iommu_hole_init(void)
+{
+}
+#endif
+
+#endif /* _ASM_X86_IOMMU_H */
diff --git a/arch/x86/include/asm/ipcbuf.h b/arch/x86/include/asm/ipcbuf.h
new file mode 100644
index 0000000..ee678fd
--- /dev/null
+++ b/arch/x86/include/asm/ipcbuf.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_X86_IPCBUF_H
+#define _ASM_X86_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for x86 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm {
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* _ASM_X86_IPCBUF_H */
diff --git a/arch/x86/include/asm/ipi.h b/arch/x86/include/asm/ipi.h
new file mode 100644
index 0000000..f89dffb
--- /dev/null
+++ b/arch/x86/include/asm/ipi.h
@@ -0,0 +1,138 @@
+#ifndef _ASM_X86_IPI_H
+#define _ASM_X86_IPI_H
+
+/*
+ * Copyright 2004 James Cleverdon, IBM.
+ * Subject to the GNU Public License, v.2
+ *
+ * Generic APIC InterProcessor Interrupt code.
+ *
+ * Moved to include file by James Cleverdon from
+ * arch/x86-64/kernel/smp.c
+ *
+ * Copyrights from kernel/smp.c:
+ *
+ * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
+ * (c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
+ * (c) 2002,2003 Andi Kleen, SuSE Labs.
+ * Subject to the GNU Public License, v.2
+ */
+
+#include <asm/hw_irq.h>
+#include <asm/apic.h>
+#include <asm/smp.h>
+
+/*
+ * the following functions deal with sending IPIs between CPUs.
+ *
+ * We use 'broadcast', CPU->CPU IPIs and self-IPIs too.
+ */
+
+static inline unsigned int __prepare_ICR(unsigned int shortcut, int vector,
+					 unsigned int dest)
+{
+	unsigned int icr = shortcut | dest;
+
+	switch (vector) {
+	default:
+		icr |= APIC_DM_FIXED | vector;
+		break;
+	case NMI_VECTOR:
+		icr |= APIC_DM_NMI;
+		break;
+	}
+	return icr;
+}
+
+static inline int __prepare_ICR2(unsigned int mask)
+{
+	return SET_APIC_DEST_FIELD(mask);
+}
+
+static inline void __xapic_wait_icr_idle(void)
+{
+	while (native_apic_mem_read(APIC_ICR) & APIC_ICR_BUSY)
+		cpu_relax();
+}
+
+static inline void __send_IPI_shortcut(unsigned int shortcut, int vector,
+				       unsigned int dest)
+{
+	/*
+	 * Subtle. In the case of the 'never do double writes' workaround
+	 * we have to lock out interrupts to be safe.  As we don't care
+	 * of the value read we use an atomic rmw access to avoid costly
+	 * cli/sti.  Otherwise we use an even cheaper single atomic write
+	 * to the APIC.
+	 */
+	unsigned int cfg;
+
+	/*
+	 * Wait for idle.
+	 */
+	__xapic_wait_icr_idle();
+
+	/*
+	 * No need to touch the target chip field
+	 */
+	cfg = __prepare_ICR(shortcut, vector, dest);
+
+	/*
+	 * Send the IPI. The write to APIC_ICR fires this off.
+	 */
+	native_apic_mem_write(APIC_ICR, cfg);
+}
+
+/*
+ * This is used to send an IPI with no shorthand notation (the destination is
+ * specified in bits 56 to 63 of the ICR).
+ */
+static inline void __send_IPI_dest_field(unsigned int mask, int vector,
+					 unsigned int dest)
+{
+	unsigned long cfg;
+
+	/*
+	 * Wait for idle.
+	 */
+	if (unlikely(vector == NMI_VECTOR))
+		safe_apic_wait_icr_idle();
+	else
+		__xapic_wait_icr_idle();
+
+	/*
+	 * prepare target chip field
+	 */
+	cfg = __prepare_ICR2(mask);
+	native_apic_mem_write(APIC_ICR2, cfg);
+
+	/*
+	 * program the ICR
+	 */
+	cfg = __prepare_ICR(0, vector, dest);
+
+	/*
+	 * Send the IPI. The write to APIC_ICR fires this off.
+	 */
+	native_apic_mem_write(APIC_ICR, cfg);
+}
+
+static inline void send_IPI_mask_sequence(cpumask_t mask, int vector)
+{
+	unsigned long flags;
+	unsigned long query_cpu;
+
+	/*
+	 * Hack. The clustered APIC addressing mode doesn't allow us to send
+	 * to an arbitrary mask, so I do a unicast to each CPU instead.
+	 * - mbligh
+	 */
+	local_irq_save(flags);
+	for_each_cpu_mask_nr(query_cpu, mask) {
+		__send_IPI_dest_field(per_cpu(x86_cpu_to_apicid, query_cpu),
+				      vector, APIC_DEST_PHYSICAL);
+	}
+	local_irq_restore(flags);
+}
+
+#endif /* _ASM_X86_IPI_H */
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
new file mode 100644
index 0000000..bae0eda
--- /dev/null
+++ b/arch/x86/include/asm/irq.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_X86_IRQ_H
+#define _ASM_X86_IRQ_H
+/*
+ *	(C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ *	IRQ/IPI changes taken from work by Thomas Radke
+ *	<tomsoft@informatik.tu-chemnitz.de>
+ */
+
+#include <asm/apicdef.h>
+#include <asm/irq_vectors.h>
+
+static inline int irq_canonicalize(int irq)
+{
+	return ((irq == 2) ? 9 : irq);
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+# define ARCH_HAS_NMI_WATCHDOG
+#endif
+
+#ifdef CONFIG_4KSTACKS
+  extern void irq_ctx_init(int cpu);
+  extern void irq_ctx_exit(int cpu);
+# define __ARCH_HAS_DO_SOFTIRQ
+#else
+# define irq_ctx_init(cpu) do { } while (0)
+# define irq_ctx_exit(cpu) do { } while (0)
+# ifdef CONFIG_X86_64
+#  define __ARCH_HAS_DO_SOFTIRQ
+# endif
+#endif
+
+#ifdef CONFIG_IRQBALANCE
+extern int irqbalance_disable(char *str);
+#endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+#include <linux/cpumask.h>
+extern void fixup_irqs(cpumask_t map);
+#endif
+
+extern unsigned int do_IRQ(struct pt_regs *regs);
+extern void init_IRQ(void);
+extern void native_init_IRQ(void);
+
+/* Interrupt vector management */
+extern DECLARE_BITMAP(used_vectors, NR_VECTORS);
+
+#endif /* _ASM_X86_IRQ_H */
diff --git a/include/asm-x86/irq_regs.h b/arch/x86/include/asm/irq_regs.h
similarity index 100%
rename from include/asm-x86/irq_regs.h
rename to arch/x86/include/asm/irq_regs.h
diff --git a/arch/x86/include/asm/irq_regs_32.h b/arch/x86/include/asm/irq_regs_32.h
new file mode 100644
index 0000000..af2f02d
--- /dev/null
+++ b/arch/x86/include/asm/irq_regs_32.h
@@ -0,0 +1,29 @@
+/*
+ * Per-cpu current frame pointer - the location of the last exception frame on
+ * the stack, stored in the per-cpu area.
+ *
+ * Jeremy Fitzhardinge <jeremy@goop.org>
+ */
+#ifndef _ASM_X86_IRQ_REGS_32_H
+#define _ASM_X86_IRQ_REGS_32_H
+
+#include <asm/percpu.h>
+
+DECLARE_PER_CPU(struct pt_regs *, irq_regs);
+
+static inline struct pt_regs *get_irq_regs(void)
+{
+	return x86_read_percpu(irq_regs);
+}
+
+static inline struct pt_regs *set_irq_regs(struct pt_regs *new_regs)
+{
+	struct pt_regs *old_regs;
+
+	old_regs = get_irq_regs();
+	x86_write_percpu(irq_regs, new_regs);
+
+	return old_regs;
+}
+
+#endif /* _ASM_X86_IRQ_REGS_32_H */
diff --git a/include/asm-x86/irq_regs_64.h b/arch/x86/include/asm/irq_regs_64.h
similarity index 100%
rename from include/asm-x86/irq_regs_64.h
rename to arch/x86/include/asm/irq_regs_64.h
diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h
new file mode 100644
index 0000000..20e1fd5
--- /dev/null
+++ b/arch/x86/include/asm/irq_remapping.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_X86_IRQ_REMAPPING_H
+#define _ASM_X86_IRQ_REMAPPING_H
+
+extern int x2apic;
+
+#define IRTE_DEST(dest) ((x2apic) ? dest : dest << 8)
+
+#endif	/* _ASM_X86_IRQ_REMAPPING_H */
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
new file mode 100644
index 0000000..d843ed0
--- /dev/null
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -0,0 +1,164 @@
+#ifndef _ASM_X86_IRQ_VECTORS_H
+#define _ASM_X86_IRQ_VECTORS_H
+
+#include <linux/threads.h>
+
+#define NMI_VECTOR		0x02
+
+/*
+ * IDT vectors usable for external interrupt sources start
+ * at 0x20:
+ */
+#define FIRST_EXTERNAL_VECTOR	0x20
+
+#ifdef CONFIG_X86_32
+# define SYSCALL_VECTOR		0x80
+#else
+# define IA32_SYSCALL_VECTOR	0x80
+#endif
+
+/*
+ * Reserve the lowest usable priority level 0x20 - 0x2f for triggering
+ * cleanup after irq migration.
+ */
+#define IRQ_MOVE_CLEANUP_VECTOR	FIRST_EXTERNAL_VECTOR
+
+/*
+ * Vectors 0x30-0x3f are used for ISA interrupts.
+ */
+#define IRQ0_VECTOR		(FIRST_EXTERNAL_VECTOR + 0x10)
+#define IRQ1_VECTOR		(IRQ0_VECTOR + 1)
+#define IRQ2_VECTOR		(IRQ0_VECTOR + 2)
+#define IRQ3_VECTOR		(IRQ0_VECTOR + 3)
+#define IRQ4_VECTOR		(IRQ0_VECTOR + 4)
+#define IRQ5_VECTOR		(IRQ0_VECTOR + 5)
+#define IRQ6_VECTOR		(IRQ0_VECTOR + 6)
+#define IRQ7_VECTOR		(IRQ0_VECTOR + 7)
+#define IRQ8_VECTOR		(IRQ0_VECTOR + 8)
+#define IRQ9_VECTOR		(IRQ0_VECTOR + 9)
+#define IRQ10_VECTOR		(IRQ0_VECTOR + 10)
+#define IRQ11_VECTOR		(IRQ0_VECTOR + 11)
+#define IRQ12_VECTOR		(IRQ0_VECTOR + 12)
+#define IRQ13_VECTOR		(IRQ0_VECTOR + 13)
+#define IRQ14_VECTOR		(IRQ0_VECTOR + 14)
+#define IRQ15_VECTOR		(IRQ0_VECTOR + 15)
+
+/*
+ * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
+ *
+ *  some of the following vectors are 'rare', they are merged
+ *  into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
+ *  TLB, reschedule and local APIC vectors are performance-critical.
+ *
+ *  Vectors 0xf0-0xfa are free (reserved for future Linux use).
+ */
+#ifdef CONFIG_X86_32
+
+# define SPURIOUS_APIC_VECTOR		0xff
+# define ERROR_APIC_VECTOR		0xfe
+# define INVALIDATE_TLB_VECTOR		0xfd
+# define RESCHEDULE_VECTOR		0xfc
+# define CALL_FUNCTION_VECTOR		0xfb
+# define CALL_FUNCTION_SINGLE_VECTOR	0xfa
+# define THERMAL_APIC_VECTOR		0xf0
+
+#else
+
+#define SPURIOUS_APIC_VECTOR		0xff
+#define ERROR_APIC_VECTOR		0xfe
+#define RESCHEDULE_VECTOR		0xfd
+#define CALL_FUNCTION_VECTOR		0xfc
+#define CALL_FUNCTION_SINGLE_VECTOR	0xfb
+#define THERMAL_APIC_VECTOR		0xfa
+#define THRESHOLD_APIC_VECTOR		0xf9
+#define UV_BAU_MESSAGE			0xf8
+#define INVALIDATE_TLB_VECTOR_END	0xf7
+#define INVALIDATE_TLB_VECTOR_START	0xf0	/* f0-f7 used for TLB flush */
+
+#define NUM_INVALIDATE_TLB_VECTORS	8
+
+#endif
+
+/*
+ * Local APIC timer IRQ vector is on a different priority level,
+ * to work around the 'lost local interrupt if more than 2 IRQ
+ * sources per level' errata.
+ */
+#define LOCAL_TIMER_VECTOR	0xef
+
+/*
+ * First APIC vector available to drivers: (vectors 0x30-0xee) we
+ * start at 0x31(0x41) to spread out vectors evenly between priority
+ * levels. (0x80 is the syscall vector)
+ */
+#define FIRST_DEVICE_VECTOR	(IRQ15_VECTOR + 2)
+
+#define NR_VECTORS		256
+
+#define FPU_IRQ			13
+
+#define	FIRST_VM86_IRQ		3
+#define LAST_VM86_IRQ		15
+#define invalid_vm86_irq(irq)	((irq) < 3 || (irq) > 15)
+
+#ifdef CONFIG_X86_64
+# if NR_CPUS < MAX_IO_APICS
+#  define NR_IRQS (NR_VECTORS + (32 * NR_CPUS))
+# else
+#  define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS))
+# endif
+
+#elif !defined(CONFIG_X86_VOYAGER)
+
+# if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT) || defined(CONFIG_X86_VISWS)
+
+#  define NR_IRQS		224
+
+# else /* IO_APIC || PARAVIRT */
+
+#  define NR_IRQS		16
+
+# endif
+
+#else /* !VISWS && !VOYAGER */
+
+# define NR_IRQS		224
+
+#endif /* VISWS */
+
+/* Voyager specific defines */
+/* These define the CPIs we use in linux */
+#define VIC_CPI_LEVEL0			0
+#define VIC_CPI_LEVEL1			1
+/* now the fake CPIs */
+#define VIC_TIMER_CPI			2
+#define VIC_INVALIDATE_CPI		3
+#define VIC_RESCHEDULE_CPI		4
+#define VIC_ENABLE_IRQ_CPI		5
+#define VIC_CALL_FUNCTION_CPI		6
+#define VIC_CALL_FUNCTION_SINGLE_CPI	7
+
+/* Now the QIC CPIs:  Since we don't need the two initial levels,
+ * these are 2 less than the VIC CPIs */
+#define QIC_CPI_OFFSET			1
+#define QIC_TIMER_CPI			(VIC_TIMER_CPI - QIC_CPI_OFFSET)
+#define QIC_INVALIDATE_CPI		(VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
+#define QIC_RESCHEDULE_CPI		(VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
+#define QIC_ENABLE_IRQ_CPI		(VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
+#define QIC_CALL_FUNCTION_CPI		(VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
+#define QIC_CALL_FUNCTION_SINGLE_CPI	(VIC_CALL_FUNCTION_SINGLE_CPI - QIC_CPI_OFFSET)
+
+#define VIC_START_FAKE_CPI		VIC_TIMER_CPI
+#define VIC_END_FAKE_CPI		VIC_CALL_FUNCTION_SINGLE_CPI
+
+/* this is the SYS_INT CPI. */
+#define VIC_SYS_INT			8
+#define VIC_CMN_INT			15
+
+/* This is the boot CPI for alternate processors.  It gets overwritten
+ * by the above once the system has activated all available processors */
+#define VIC_CPU_BOOT_CPI		VIC_CPI_LEVEL0
+#define VIC_CPU_BOOT_ERRATA_CPI		(VIC_CPI_LEVEL0 + 8)
+
+
+#endif /* _ASM_X86_IRQ_VECTORS_H */
diff --git a/include/asm-x86/irqflags.h b/arch/x86/include/asm/irqflags.h
similarity index 100%
rename from include/asm-x86/irqflags.h
rename to arch/x86/include/asm/irqflags.h
diff --git a/arch/x86/include/asm/ist.h b/arch/x86/include/asm/ist.h
new file mode 100644
index 0000000..7e5dff1
--- /dev/null
+++ b/arch/x86/include/asm/ist.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_X86_IST_H
+#define _ASM_X86_IST_H
+
+/*
+ * Include file for the interface to IST BIOS
+ * Copyright 2002 Andy Grover <andrew.grover@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+
+#include <linux/types.h>
+
+struct ist_info {
+	__u32 signature;
+	__u32 command;
+	__u32 event;
+	__u32 perf_level;
+};
+
+#ifdef __KERNEL__
+
+extern struct ist_info ist_info;
+
+#endif	/* __KERNEL__ */
+#endif /* _ASM_X86_IST_H */
diff --git a/arch/x86/include/asm/k8.h b/arch/x86/include/asm/k8.h
new file mode 100644
index 0000000..54c8cc5
--- /dev/null
+++ b/arch/x86/include/asm/k8.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_X86_K8_H
+#define _ASM_X86_K8_H
+
+#include <linux/pci.h>
+
+extern struct pci_device_id k8_nb_ids[];
+
+extern int early_is_k8_nb(u32 value);
+extern struct pci_dev **k8_northbridges;
+extern int num_k8_northbridges;
+extern int cache_k8_northbridges(void);
+extern void k8_flush_garts(void);
+extern int k8_scan_nodes(unsigned long start, unsigned long end);
+
+#endif /* _ASM_X86_K8_H */
diff --git a/arch/x86/include/asm/kdebug.h b/arch/x86/include/asm/kdebug.h
new file mode 100644
index 0000000..fa7c0b9
--- /dev/null
+++ b/arch/x86/include/asm/kdebug.h
@@ -0,0 +1,37 @@
+#ifndef _ASM_X86_KDEBUG_H
+#define _ASM_X86_KDEBUG_H
+
+#include <linux/notifier.h>
+
+struct pt_regs;
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_INT3,
+	DIE_DEBUG,
+	DIE_PANIC,
+	DIE_NMI,
+	DIE_DIE,
+	DIE_NMIWATCHDOG,
+	DIE_KERNELDEBUG,
+	DIE_TRAP,
+	DIE_GPF,
+	DIE_CALL,
+	DIE_NMI_IPI,
+	DIE_PAGE_FAULT,
+	DIE_NMIUNKNOWN,
+};
+
+extern void printk_address(unsigned long address, int reliable);
+extern void die(const char *, struct pt_regs *,long);
+extern int __must_check __die(const char *, struct pt_regs *, long);
+extern void show_registers(struct pt_regs *regs);
+extern void show_trace(struct task_struct *t, struct pt_regs *regs,
+		       unsigned long *sp, unsigned long bp);
+extern void __show_regs(struct pt_regs *regs, int all);
+extern void show_regs(struct pt_regs *regs);
+extern unsigned long oops_begin(void);
+extern void oops_end(unsigned long, struct pt_regs *, int signr);
+
+#endif /* _ASM_X86_KDEBUG_H */
diff --git a/arch/x86/include/asm/kexec.h b/arch/x86/include/asm/kexec.h
new file mode 100644
index 0000000..a1f2277
--- /dev/null
+++ b/arch/x86/include/asm/kexec.h
@@ -0,0 +1,175 @@
+#ifndef _ASM_X86_KEXEC_H
+#define _ASM_X86_KEXEC_H
+
+#ifdef CONFIG_X86_32
+# define PA_CONTROL_PAGE	0
+# define VA_CONTROL_PAGE	1
+# define PA_PGD			2
+# define VA_PGD			3
+# define PA_PTE_0		4
+# define VA_PTE_0		5
+# define PA_PTE_1		6
+# define VA_PTE_1		7
+# define PA_SWAP_PAGE		8
+# ifdef CONFIG_X86_PAE
+#  define PA_PMD_0		9
+#  define VA_PMD_0		10
+#  define PA_PMD_1		11
+#  define VA_PMD_1		12
+#  define PAGES_NR		13
+# else
+#  define PAGES_NR		9
+# endif
+#else
+# define PA_CONTROL_PAGE	0
+# define VA_CONTROL_PAGE	1
+# define PA_PGD			2
+# define VA_PGD			3
+# define PA_PUD_0		4
+# define VA_PUD_0		5
+# define PA_PMD_0		6
+# define VA_PMD_0		7
+# define PA_PTE_0		8
+# define VA_PTE_0		9
+# define PA_PUD_1		10
+# define VA_PUD_1		11
+# define PA_PMD_1		12
+# define VA_PMD_1		13
+# define PA_PTE_1		14
+# define VA_PTE_1		15
+# define PA_TABLE_PAGE		16
+# define PAGES_NR		17
+#endif
+
+#ifdef CONFIG_X86_32
+# define KEXEC_CONTROL_CODE_MAX_SIZE	2048
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <linux/string.h>
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+
+/*
+ * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
+ * I.e. Maximum page that is mapped directly into kernel memory,
+ * and kmap is not required.
+ *
+ * So far x86_64 is limited to 40 physical address bits.
+ */
+#ifdef CONFIG_X86_32
+/* Maximum physical address we can use pages from */
+# define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+/* Maximum address we can reach in physical address mode */
+# define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+/* Maximum address we can use for the control code buffer */
+# define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+
+# define KEXEC_CONTROL_PAGE_SIZE	4096
+
+/* The native architecture */
+# define KEXEC_ARCH KEXEC_ARCH_386
+
+/* We can also handle crash dumps from 64 bit kernel. */
+# define vmcore_elf_check_arch_cross(x) ((x)->e_machine == EM_X86_64)
+#else
+/* Maximum physical address we can use pages from */
+# define KEXEC_SOURCE_MEMORY_LIMIT      (0xFFFFFFFFFFUL)
+/* Maximum address we can reach in physical address mode */
+# define KEXEC_DESTINATION_MEMORY_LIMIT (0xFFFFFFFFFFUL)
+/* Maximum address we can use for the control pages */
+# define KEXEC_CONTROL_MEMORY_LIMIT     (0xFFFFFFFFFFUL)
+
+/* Allocate one page for the pdp and the second for the code */
+# define KEXEC_CONTROL_PAGE_SIZE  (4096UL + 4096UL)
+
+/* The native architecture */
+# define KEXEC_ARCH KEXEC_ARCH_X86_64
+#endif
+
+/*
+ * CPU does not save ss and sp on stack if execution is already
+ * running in kernel mode at the time of NMI occurrence. This code
+ * fixes it.
+ */
+static inline void crash_fixup_ss_esp(struct pt_regs *newregs,
+				      struct pt_regs *oldregs)
+{
+#ifdef CONFIG_X86_32
+	newregs->sp = (unsigned long)&(oldregs->sp);
+	asm volatile("xorl %%eax, %%eax\n\t"
+		     "movw %%ss, %%ax\n\t"
+		     :"=a"(newregs->ss));
+#endif
+}
+
+/*
+ * This function is responsible for capturing register states if coming
+ * via panic otherwise just fix up the ss and sp if coming via kernel
+ * mode exception.
+ */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+				    struct pt_regs *oldregs)
+{
+	if (oldregs) {
+		memcpy(newregs, oldregs, sizeof(*newregs));
+		crash_fixup_ss_esp(newregs, oldregs);
+	} else {
+#ifdef CONFIG_X86_32
+		asm volatile("movl %%ebx,%0" : "=m"(newregs->bx));
+		asm volatile("movl %%ecx,%0" : "=m"(newregs->cx));
+		asm volatile("movl %%edx,%0" : "=m"(newregs->dx));
+		asm volatile("movl %%esi,%0" : "=m"(newregs->si));
+		asm volatile("movl %%edi,%0" : "=m"(newregs->di));
+		asm volatile("movl %%ebp,%0" : "=m"(newregs->bp));
+		asm volatile("movl %%eax,%0" : "=m"(newregs->ax));
+		asm volatile("movl %%esp,%0" : "=m"(newregs->sp));
+		asm volatile("movl %%ss, %%eax;" :"=a"(newregs->ss));
+		asm volatile("movl %%cs, %%eax;" :"=a"(newregs->cs));
+		asm volatile("movl %%ds, %%eax;" :"=a"(newregs->ds));
+		asm volatile("movl %%es, %%eax;" :"=a"(newregs->es));
+		asm volatile("pushfl; popl %0" :"=m"(newregs->flags));
+#else
+		asm volatile("movq %%rbx,%0" : "=m"(newregs->bx));
+		asm volatile("movq %%rcx,%0" : "=m"(newregs->cx));
+		asm volatile("movq %%rdx,%0" : "=m"(newregs->dx));
+		asm volatile("movq %%rsi,%0" : "=m"(newregs->si));
+		asm volatile("movq %%rdi,%0" : "=m"(newregs->di));
+		asm volatile("movq %%rbp,%0" : "=m"(newregs->bp));
+		asm volatile("movq %%rax,%0" : "=m"(newregs->ax));
+		asm volatile("movq %%rsp,%0" : "=m"(newregs->sp));
+		asm volatile("movq %%r8,%0" : "=m"(newregs->r8));
+		asm volatile("movq %%r9,%0" : "=m"(newregs->r9));
+		asm volatile("movq %%r10,%0" : "=m"(newregs->r10));
+		asm volatile("movq %%r11,%0" : "=m"(newregs->r11));
+		asm volatile("movq %%r12,%0" : "=m"(newregs->r12));
+		asm volatile("movq %%r13,%0" : "=m"(newregs->r13));
+		asm volatile("movq %%r14,%0" : "=m"(newregs->r14));
+		asm volatile("movq %%r15,%0" : "=m"(newregs->r15));
+		asm volatile("movl %%ss, %%eax;" :"=a"(newregs->ss));
+		asm volatile("movl %%cs, %%eax;" :"=a"(newregs->cs));
+		asm volatile("pushfq; popq %0" :"=m"(newregs->flags));
+#endif
+		newregs->ip = (unsigned long)current_text_addr();
+	}
+}
+
+#ifdef CONFIG_X86_32
+asmlinkage unsigned long
+relocate_kernel(unsigned long indirection_page,
+		unsigned long control_page,
+		unsigned long start_address,
+		unsigned int has_pae,
+		unsigned int preserve_context);
+#else
+NORET_TYPE void
+relocate_kernel(unsigned long indirection_page,
+		unsigned long page_list,
+		unsigned long start_address) ATTRIB_NORET;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_KEXEC_H */
diff --git a/arch/x86/include/asm/kgdb.h b/arch/x86/include/asm/kgdb.h
new file mode 100644
index 0000000..e6c6c80
--- /dev/null
+++ b/arch/x86/include/asm/kgdb.h
@@ -0,0 +1,79 @@
+#ifndef _ASM_X86_KGDB_H
+#define _ASM_X86_KGDB_H
+
+/*
+ * Copyright (C) 2001-2004 Amit S. Kale
+ * Copyright (C) 2008 Wind River Systems, Inc.
+ */
+
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound
+ * buffers at least NUMREGBYTES*2 are needed for register packets
+ * Longer buffer is needed to list all threads
+ */
+#define BUFMAX			1024
+
+/*
+ *  Note that this register image is in a different order than
+ *  the register image that Linux produces at interrupt time.
+ *
+ *  Linux's register image is defined by struct pt_regs in ptrace.h.
+ *  Just why GDB uses a different order is a historical mystery.
+ */
+#ifdef CONFIG_X86_32
+enum regnames {
+	GDB_AX,			/* 0 */
+	GDB_CX,			/* 1 */
+	GDB_DX,			/* 2 */
+	GDB_BX,			/* 3 */
+	GDB_SP,			/* 4 */
+	GDB_BP,			/* 5 */
+	GDB_SI,			/* 6 */
+	GDB_DI,			/* 7 */
+	GDB_PC,			/* 8 also known as eip */
+	GDB_PS,			/* 9 also known as eflags */
+	GDB_CS,			/* 10 */
+	GDB_SS,			/* 11 */
+	GDB_DS,			/* 12 */
+	GDB_ES,			/* 13 */
+	GDB_FS,			/* 14 */
+	GDB_GS,			/* 15 */
+};
+#define NUMREGBYTES		((GDB_GS+1)*4)
+#else /* ! CONFIG_X86_32 */
+enum regnames64 {
+	GDB_AX,			/* 0 */
+	GDB_BX,			/* 1 */
+	GDB_CX,			/* 2 */
+	GDB_DX,			/* 3 */
+	GDB_SI,			/* 4 */
+	GDB_DI,			/* 5 */
+	GDB_BP,			/* 6 */
+	GDB_SP,			/* 7 */
+	GDB_R8,			/* 8 */
+	GDB_R9,			/* 9 */
+	GDB_R10,		/* 10 */
+	GDB_R11,		/* 11 */
+	GDB_R12,		/* 12 */
+	GDB_R13,		/* 13 */
+	GDB_R14,		/* 14 */
+	GDB_R15,		/* 15 */
+	GDB_PC,			/* 16 */
+};
+
+enum regnames32 {
+	GDB_PS = 34,
+	GDB_CS,
+	GDB_SS,
+};
+#define NUMREGBYTES		((GDB_SS+1)*4)
+#endif /* CONFIG_X86_32 */
+
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm("   int $3");
+}
+#define BREAK_INSTR_SIZE	1
+#define CACHE_FLUSH_IS_SAFE	1
+
+#endif /* _ASM_X86_KGDB_H */
diff --git a/arch/x86/include/asm/kmap_types.h b/arch/x86/include/asm/kmap_types.h
new file mode 100644
index 0000000..5759c16
--- /dev/null
+++ b/arch/x86/include/asm/kmap_types.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_X86_KMAP_TYPES_H
+#define _ASM_X86_KMAP_TYPES_H
+
+#if defined(CONFIG_X86_32) && defined(CONFIG_DEBUG_HIGHMEM)
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif /* _ASM_X86_KMAP_TYPES_H */
diff --git a/arch/x86/include/asm/kprobes.h b/arch/x86/include/asm/kprobes.h
new file mode 100644
index 0000000..4fe681d
--- /dev/null
+++ b/arch/x86/include/asm/kprobes.h
@@ -0,0 +1,88 @@
+#ifndef _ASM_X86_KPROBES_H
+#define _ASM_X86_KPROBES_H
+/*
+ *  Kernel Probes (KProbes)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * See arch/x86/kernel/kprobes.c for x86 kprobes history.
+ */
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define  __ARCH_WANT_KPROBES_INSN_SLOT
+
+struct pt_regs;
+struct kprobe;
+
+typedef u8 kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION	0xcc
+#define RELATIVEJUMP_INSTRUCTION 0xe9
+#define MAX_INSN_SIZE 16
+#define MAX_STACK_SIZE 64
+#define MIN_STACK_SIZE(ADDR)					       \
+	(((MAX_STACK_SIZE) < (((unsigned long)current_thread_info()) + \
+			      THREAD_SIZE - (unsigned long)(ADDR)))    \
+	 ? (MAX_STACK_SIZE)					       \
+	 : (((unsigned long)current_thread_info()) +		       \
+	    THREAD_SIZE - (unsigned long)(ADDR)))
+
+#define flush_insn_slot(p)	do { } while (0)
+
+extern const int kretprobe_blacklist_size;
+
+void arch_remove_kprobe(struct kprobe *p);
+void kretprobe_trampoline(void);
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+	/* copy of the original instruction */
+	kprobe_opcode_t *insn;
+	/*
+	 * boostable = -1: This instruction type is not boostable.
+	 * boostable = 0: This instruction type is boostable.
+	 * boostable = 1: This instruction has been boosted: we have
+	 * added a relative jump after the instruction copy in insn,
+	 * so no single-step and fixup are needed (unless there's
+	 * a post_handler or break_handler).
+	 */
+	int boostable;
+};
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+	unsigned long old_flags;
+	unsigned long saved_flags;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	unsigned long kprobe_old_flags;
+	unsigned long kprobe_saved_flags;
+	unsigned long *jprobe_saved_sp;
+	struct pt_regs jprobe_saved_regs;
+	kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
+	struct prev_kprobe prev_kprobe;
+};
+
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+#endif /* _ASM_X86_KPROBES_H */
diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
new file mode 100644
index 0000000..b95162a
--- /dev/null
+++ b/arch/x86/include/asm/kvm.h
@@ -0,0 +1,211 @@
+#ifndef _ASM_X86_KVM_H
+#define _ASM_X86_KVM_H
+
+/*
+ * KVM x86 specific structures and definitions
+ *
+ */
+
+#include <asm/types.h>
+#include <linux/ioctl.h>
+
+/* Architectural interrupt line count. */
+#define KVM_NR_INTERRUPTS 256
+
+struct kvm_memory_alias {
+	__u32 slot;  /* this has a different namespace than memory slots */
+	__u32 flags;
+	__u64 guest_phys_addr;
+	__u64 memory_size;
+	__u64 target_phys_addr;
+};
+
+/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */
+struct kvm_pic_state {
+	__u8 last_irr;	/* edge detection */
+	__u8 irr;		/* interrupt request register */
+	__u8 imr;		/* interrupt mask register */
+	__u8 isr;		/* interrupt service register */
+	__u8 priority_add;	/* highest irq priority */
+	__u8 irq_base;
+	__u8 read_reg_select;
+	__u8 poll;
+	__u8 special_mask;
+	__u8 init_state;
+	__u8 auto_eoi;
+	__u8 rotate_on_auto_eoi;
+	__u8 special_fully_nested_mode;
+	__u8 init4;		/* true if 4 byte init */
+	__u8 elcr;		/* PIIX edge/trigger selection */
+	__u8 elcr_mask;
+};
+
+#define KVM_IOAPIC_NUM_PINS  24
+struct kvm_ioapic_state {
+	__u64 base_address;
+	__u32 ioregsel;
+	__u32 id;
+	__u32 irr;
+	__u32 pad;
+	union {
+		__u64 bits;
+		struct {
+			__u8 vector;
+			__u8 delivery_mode:3;
+			__u8 dest_mode:1;
+			__u8 delivery_status:1;
+			__u8 polarity:1;
+			__u8 remote_irr:1;
+			__u8 trig_mode:1;
+			__u8 mask:1;
+			__u8 reserve:7;
+			__u8 reserved[4];
+			__u8 dest_id;
+		} fields;
+	} redirtbl[KVM_IOAPIC_NUM_PINS];
+};
+
+#define KVM_IRQCHIP_PIC_MASTER   0
+#define KVM_IRQCHIP_PIC_SLAVE    1
+#define KVM_IRQCHIP_IOAPIC       2
+
+/* for KVM_GET_REGS and KVM_SET_REGS */
+struct kvm_regs {
+	/* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+	__u64 rax, rbx, rcx, rdx;
+	__u64 rsi, rdi, rsp, rbp;
+	__u64 r8,  r9,  r10, r11;
+	__u64 r12, r13, r14, r15;
+	__u64 rip, rflags;
+};
+
+/* for KVM_GET_LAPIC and KVM_SET_LAPIC */
+#define KVM_APIC_REG_SIZE 0x400
+struct kvm_lapic_state {
+	char regs[KVM_APIC_REG_SIZE];
+};
+
+struct kvm_segment {
+	__u64 base;
+	__u32 limit;
+	__u16 selector;
+	__u8  type;
+	__u8  present, dpl, db, s, l, g, avl;
+	__u8  unusable;
+	__u8  padding;
+};
+
+struct kvm_dtable {
+	__u64 base;
+	__u16 limit;
+	__u16 padding[3];
+};
+
+
+/* for KVM_GET_SREGS and KVM_SET_SREGS */
+struct kvm_sregs {
+	/* out (KVM_GET_SREGS) / in (KVM_SET_SREGS) */
+	struct kvm_segment cs, ds, es, fs, gs, ss;
+	struct kvm_segment tr, ldt;
+	struct kvm_dtable gdt, idt;
+	__u64 cr0, cr2, cr3, cr4, cr8;
+	__u64 efer;
+	__u64 apic_base;
+	__u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64];
+};
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+	__u8  fpr[8][16];
+	__u16 fcw;
+	__u16 fsw;
+	__u8  ftwx;  /* in fxsave format */
+	__u8  pad1;
+	__u16 last_opcode;
+	__u64 last_ip;
+	__u64 last_dp;
+	__u8  xmm[16][16];
+	__u32 mxcsr;
+	__u32 pad2;
+};
+
+struct kvm_msr_entry {
+	__u32 index;
+	__u32 reserved;
+	__u64 data;
+};
+
+/* for KVM_GET_MSRS and KVM_SET_MSRS */
+struct kvm_msrs {
+	__u32 nmsrs; /* number of msrs in entries */
+	__u32 pad;
+
+	struct kvm_msr_entry entries[0];
+};
+
+/* for KVM_GET_MSR_INDEX_LIST */
+struct kvm_msr_list {
+	__u32 nmsrs; /* number of msrs in entries */
+	__u32 indices[0];
+};
+
+
+struct kvm_cpuid_entry {
+	__u32 function;
+	__u32 eax;
+	__u32 ebx;
+	__u32 ecx;
+	__u32 edx;
+	__u32 padding;
+};
+
+/* for KVM_SET_CPUID */
+struct kvm_cpuid {
+	__u32 nent;
+	__u32 padding;
+	struct kvm_cpuid_entry entries[0];
+};
+
+struct kvm_cpuid_entry2 {
+	__u32 function;
+	__u32 index;
+	__u32 flags;
+	__u32 eax;
+	__u32 ebx;
+	__u32 ecx;
+	__u32 edx;
+	__u32 padding[3];
+};
+
+#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX 1
+#define KVM_CPUID_FLAG_STATEFUL_FUNC    2
+#define KVM_CPUID_FLAG_STATE_READ_NEXT  4
+
+/* for KVM_SET_CPUID2 */
+struct kvm_cpuid2 {
+	__u32 nent;
+	__u32 padding;
+	struct kvm_cpuid_entry2 entries[0];
+};
+
+/* for KVM_GET_PIT and KVM_SET_PIT */
+struct kvm_pit_channel_state {
+	__u32 count; /* can be 65536 */
+	__u16 latched_count;
+	__u8 count_latched;
+	__u8 status_latched;
+	__u8 status;
+	__u8 read_state;
+	__u8 write_state;
+	__u8 write_latch;
+	__u8 rw_mode;
+	__u8 mode;
+	__u8 bcd;
+	__u8 gate;
+	__s64 count_load_time;
+};
+
+struct kvm_pit_state {
+	struct kvm_pit_channel_state channels[3];
+};
+#endif /* _ASM_X86_KVM_H */
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
new file mode 100644
index 0000000..65679d0
--- /dev/null
+++ b/arch/x86/include/asm/kvm_host.h
@@ -0,0 +1,752 @@
+/*
+ * Kernel-based Virtual Machine driver for Linux
+ *
+ * This header defines architecture specific interfaces, x86 version
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef _ASM_X86_KVM_HOST_H
+#define _ASM_X86_KVM_HOST_H
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/mmu_notifier.h>
+
+#include <linux/kvm.h>
+#include <linux/kvm_para.h>
+#include <linux/kvm_types.h>
+
+#include <asm/pvclock-abi.h>
+#include <asm/desc.h>
+
+#define KVM_MAX_VCPUS 16
+#define KVM_MEMORY_SLOTS 32
+/* memory slots that does not exposed to userspace */
+#define KVM_PRIVATE_MEM_SLOTS 4
+
+#define KVM_PIO_PAGE_OFFSET 1
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 2
+
+#define CR3_PAE_RESERVED_BITS ((X86_CR3_PWT | X86_CR3_PCD) - 1)
+#define CR3_NONPAE_RESERVED_BITS ((PAGE_SIZE-1) & ~(X86_CR3_PWT | X86_CR3_PCD))
+#define CR3_L_MODE_RESERVED_BITS (CR3_NONPAE_RESERVED_BITS |	\
+				  0xFFFFFF0000000000ULL)
+
+#define KVM_GUEST_CR0_MASK				   \
+	(X86_CR0_PG | X86_CR0_PE | X86_CR0_WP | X86_CR0_NE \
+	 | X86_CR0_NW | X86_CR0_CD)
+#define KVM_VM_CR0_ALWAYS_ON						\
+	(X86_CR0_PG | X86_CR0_PE | X86_CR0_WP | X86_CR0_NE | X86_CR0_TS \
+	 | X86_CR0_MP)
+#define KVM_GUEST_CR4_MASK						\
+	(X86_CR4_VME | X86_CR4_PSE | X86_CR4_PAE | X86_CR4_PGE | X86_CR4_VMXE)
+#define KVM_PMODE_VM_CR4_ALWAYS_ON (X86_CR4_PAE | X86_CR4_VMXE)
+#define KVM_RMODE_VM_CR4_ALWAYS_ON (X86_CR4_VME | X86_CR4_PAE | X86_CR4_VMXE)
+
+#define INVALID_PAGE (~(hpa_t)0)
+#define UNMAPPED_GVA (~(gpa_t)0)
+
+/* shadow tables are PAE even on non-PAE hosts */
+#define KVM_HPAGE_SHIFT 21
+#define KVM_HPAGE_SIZE (1UL << KVM_HPAGE_SHIFT)
+#define KVM_HPAGE_MASK (~(KVM_HPAGE_SIZE - 1))
+
+#define KVM_PAGES_PER_HPAGE (KVM_HPAGE_SIZE / PAGE_SIZE)
+
+#define DE_VECTOR 0
+#define DB_VECTOR 1
+#define BP_VECTOR 3
+#define OF_VECTOR 4
+#define BR_VECTOR 5
+#define UD_VECTOR 6
+#define NM_VECTOR 7
+#define DF_VECTOR 8
+#define TS_VECTOR 10
+#define NP_VECTOR 11
+#define SS_VECTOR 12
+#define GP_VECTOR 13
+#define PF_VECTOR 14
+#define MF_VECTOR 16
+#define MC_VECTOR 18
+
+#define SELECTOR_TI_MASK (1 << 2)
+#define SELECTOR_RPL_MASK 0x03
+
+#define IOPL_SHIFT 12
+
+#define KVM_ALIAS_SLOTS 4
+
+#define KVM_PERMILLE_MMU_PAGES 20
+#define KVM_MIN_ALLOC_MMU_PAGES 64
+#define KVM_MMU_HASH_SHIFT 10
+#define KVM_NUM_MMU_PAGES (1 << KVM_MMU_HASH_SHIFT)
+#define KVM_MIN_FREE_MMU_PAGES 5
+#define KVM_REFILL_PAGES 25
+#define KVM_MAX_CPUID_ENTRIES 40
+#define KVM_NR_VAR_MTRR 8
+
+extern spinlock_t kvm_lock;
+extern struct list_head vm_list;
+
+struct kvm_vcpu;
+struct kvm;
+
+enum kvm_reg {
+	VCPU_REGS_RAX = 0,
+	VCPU_REGS_RCX = 1,
+	VCPU_REGS_RDX = 2,
+	VCPU_REGS_RBX = 3,
+	VCPU_REGS_RSP = 4,
+	VCPU_REGS_RBP = 5,
+	VCPU_REGS_RSI = 6,
+	VCPU_REGS_RDI = 7,
+#ifdef CONFIG_X86_64
+	VCPU_REGS_R8 = 8,
+	VCPU_REGS_R9 = 9,
+	VCPU_REGS_R10 = 10,
+	VCPU_REGS_R11 = 11,
+	VCPU_REGS_R12 = 12,
+	VCPU_REGS_R13 = 13,
+	VCPU_REGS_R14 = 14,
+	VCPU_REGS_R15 = 15,
+#endif
+	VCPU_REGS_RIP,
+	NR_VCPU_REGS
+};
+
+enum {
+	VCPU_SREG_ES,
+	VCPU_SREG_CS,
+	VCPU_SREG_SS,
+	VCPU_SREG_DS,
+	VCPU_SREG_FS,
+	VCPU_SREG_GS,
+	VCPU_SREG_TR,
+	VCPU_SREG_LDTR,
+};
+
+#include <asm/kvm_x86_emulate.h>
+
+#define KVM_NR_MEM_OBJS 40
+
+struct kvm_guest_debug {
+	int enabled;
+	unsigned long bp[4];
+	int singlestep;
+};
+
+/*
+ * We don't want allocation failures within the mmu code, so we preallocate
+ * enough memory for a single page fault in a cache.
+ */
+struct kvm_mmu_memory_cache {
+	int nobjs;
+	void *objects[KVM_NR_MEM_OBJS];
+};
+
+#define NR_PTE_CHAIN_ENTRIES 5
+
+struct kvm_pte_chain {
+	u64 *parent_ptes[NR_PTE_CHAIN_ENTRIES];
+	struct hlist_node link;
+};
+
+/*
+ * kvm_mmu_page_role, below, is defined as:
+ *
+ *   bits 0:3 - total guest paging levels (2-4, or zero for real mode)
+ *   bits 4:7 - page table level for this shadow (1-4)
+ *   bits 8:9 - page table quadrant for 2-level guests
+ *   bit   16 - "metaphysical" - gfn is not a real page (huge page/real mode)
+ *   bits 17:19 - common access permissions for all ptes in this shadow page
+ */
+union kvm_mmu_page_role {
+	unsigned word;
+	struct {
+		unsigned glevels:4;
+		unsigned level:4;
+		unsigned quadrant:2;
+		unsigned pad_for_nice_hex_output:6;
+		unsigned metaphysical:1;
+		unsigned access:3;
+		unsigned invalid:1;
+	};
+};
+
+struct kvm_mmu_page {
+	struct list_head link;
+	struct hlist_node hash_link;
+
+	/*
+	 * The following two entries are used to key the shadow page in the
+	 * hash table.
+	 */
+	gfn_t gfn;
+	union kvm_mmu_page_role role;
+
+	u64 *spt;
+	/* hold the gfn of each spte inside spt */
+	gfn_t *gfns;
+	unsigned long slot_bitmap; /* One bit set per slot which has memory
+				    * in this shadow page.
+				    */
+	int multimapped;         /* More than one parent_pte? */
+	int root_count;          /* Currently serving as active root */
+	bool unsync;
+	bool unsync_children;
+	union {
+		u64 *parent_pte;               /* !multimapped */
+		struct hlist_head parent_ptes; /* multimapped, kvm_pte_chain */
+	};
+	DECLARE_BITMAP(unsync_child_bitmap, 512);
+};
+
+struct kvm_pv_mmu_op_buffer {
+	void *ptr;
+	unsigned len;
+	unsigned processed;
+	char buf[512] __aligned(sizeof(long));
+};
+
+/*
+ * x86 supports 3 paging modes (4-level 64-bit, 3-level 64-bit, and 2-level
+ * 32-bit).  The kvm_mmu structure abstracts the details of the current mmu
+ * mode.
+ */
+struct kvm_mmu {
+	void (*new_cr3)(struct kvm_vcpu *vcpu);
+	int (*page_fault)(struct kvm_vcpu *vcpu, gva_t gva, u32 err);
+	void (*free)(struct kvm_vcpu *vcpu);
+	gpa_t (*gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t gva);
+	void (*prefetch_page)(struct kvm_vcpu *vcpu,
+			      struct kvm_mmu_page *page);
+	int (*sync_page)(struct kvm_vcpu *vcpu,
+			 struct kvm_mmu_page *sp);
+	void (*invlpg)(struct kvm_vcpu *vcpu, gva_t gva);
+	hpa_t root_hpa;
+	int root_level;
+	int shadow_root_level;
+
+	u64 *pae_root;
+};
+
+struct kvm_vcpu_arch {
+	u64 host_tsc;
+	int interrupt_window_open;
+	unsigned long irq_summary; /* bit vector: 1 per word in irq_pending */
+	DECLARE_BITMAP(irq_pending, KVM_NR_INTERRUPTS);
+	/*
+	 * rip and regs accesses must go through
+	 * kvm_{register,rip}_{read,write} functions.
+	 */
+	unsigned long regs[NR_VCPU_REGS];
+	u32 regs_avail;
+	u32 regs_dirty;
+
+	unsigned long cr0;
+	unsigned long cr2;
+	unsigned long cr3;
+	unsigned long cr4;
+	unsigned long cr8;
+	u64 pdptrs[4]; /* pae */
+	u64 shadow_efer;
+	u64 apic_base;
+	struct kvm_lapic *apic;    /* kernel irqchip context */
+	int mp_state;
+	int sipi_vector;
+	u64 ia32_misc_enable_msr;
+	bool tpr_access_reporting;
+
+	struct kvm_mmu mmu;
+	/* only needed in kvm_pv_mmu_op() path, but it's hot so
+	 * put it here to avoid allocation */
+	struct kvm_pv_mmu_op_buffer mmu_op_buffer;
+
+	struct kvm_mmu_memory_cache mmu_pte_chain_cache;
+	struct kvm_mmu_memory_cache mmu_rmap_desc_cache;
+	struct kvm_mmu_memory_cache mmu_page_cache;
+	struct kvm_mmu_memory_cache mmu_page_header_cache;
+
+	gfn_t last_pt_write_gfn;
+	int   last_pt_write_count;
+	u64  *last_pte_updated;
+	gfn_t last_pte_gfn;
+
+	struct {
+		gfn_t gfn;	/* presumed gfn during guest pte update */
+		pfn_t pfn;	/* pfn corresponding to that gfn */
+		int largepage;
+		unsigned long mmu_seq;
+	} update_pte;
+
+	struct i387_fxsave_struct host_fx_image;
+	struct i387_fxsave_struct guest_fx_image;
+
+	gva_t mmio_fault_cr2;
+	struct kvm_pio_request pio;
+	void *pio_data;
+
+	struct kvm_queued_exception {
+		bool pending;
+		bool has_error_code;
+		u8 nr;
+		u32 error_code;
+	} exception;
+
+	struct kvm_queued_interrupt {
+		bool pending;
+		u8 nr;
+	} interrupt;
+
+	struct {
+		int active;
+		u8 save_iopl;
+		struct kvm_save_segment {
+			u16 selector;
+			unsigned long base;
+			u32 limit;
+			u32 ar;
+		} tr, es, ds, fs, gs;
+	} rmode;
+	int halt_request; /* real mode on Intel only */
+
+	int cpuid_nent;
+	struct kvm_cpuid_entry2 cpuid_entries[KVM_MAX_CPUID_ENTRIES];
+	/* emulate context */
+
+	struct x86_emulate_ctxt emulate_ctxt;
+
+	gpa_t time;
+	struct pvclock_vcpu_time_info hv_clock;
+	unsigned int hv_clock_tsc_khz;
+	unsigned int time_offset;
+	struct page *time_page;
+
+	bool nmi_pending;
+	bool nmi_injected;
+
+	u64 mtrr[0x100];
+};
+
+struct kvm_mem_alias {
+	gfn_t base_gfn;
+	unsigned long npages;
+	gfn_t target_gfn;
+};
+
+struct kvm_arch{
+	int naliases;
+	struct kvm_mem_alias aliases[KVM_ALIAS_SLOTS];
+
+	unsigned int n_free_mmu_pages;
+	unsigned int n_requested_mmu_pages;
+	unsigned int n_alloc_mmu_pages;
+	struct hlist_head mmu_page_hash[KVM_NUM_MMU_PAGES];
+	/*
+	 * Hash table of struct kvm_mmu_page.
+	 */
+	struct list_head active_mmu_pages;
+	struct list_head assigned_dev_head;
+	struct dmar_domain *intel_iommu_domain;
+	struct kvm_pic *vpic;
+	struct kvm_ioapic *vioapic;
+	struct kvm_pit *vpit;
+	struct hlist_head irq_ack_notifier_list;
+
+	int round_robin_prev_vcpu;
+	unsigned int tss_addr;
+	struct page *apic_access_page;
+
+	gpa_t wall_clock;
+
+	struct page *ept_identity_pagetable;
+	bool ept_identity_pagetable_done;
+};
+
+struct kvm_vm_stat {
+	u32 mmu_shadow_zapped;
+	u32 mmu_pte_write;
+	u32 mmu_pte_updated;
+	u32 mmu_pde_zapped;
+	u32 mmu_flooded;
+	u32 mmu_recycled;
+	u32 mmu_cache_miss;
+	u32 mmu_unsync;
+	u32 remote_tlb_flush;
+	u32 lpages;
+};
+
+struct kvm_vcpu_stat {
+	u32 pf_fixed;
+	u32 pf_guest;
+	u32 tlb_flush;
+	u32 invlpg;
+
+	u32 exits;
+	u32 io_exits;
+	u32 mmio_exits;
+	u32 signal_exits;
+	u32 irq_window_exits;
+	u32 nmi_window_exits;
+	u32 halt_exits;
+	u32 halt_wakeup;
+	u32 request_irq_exits;
+	u32 irq_exits;
+	u32 host_state_reload;
+	u32 efer_reload;
+	u32 fpu_reload;
+	u32 insn_emulation;
+	u32 insn_emulation_fail;
+	u32 hypercalls;
+	u32 irq_injections;
+};
+
+struct descriptor_table {
+	u16 limit;
+	unsigned long base;
+} __attribute__((packed));
+
+struct kvm_x86_ops {
+	int (*cpu_has_kvm_support)(void);          /* __init */
+	int (*disabled_by_bios)(void);             /* __init */
+	void (*hardware_enable)(void *dummy);      /* __init */
+	void (*hardware_disable)(void *dummy);
+	void (*check_processor_compatibility)(void *rtn);
+	int (*hardware_setup)(void);               /* __init */
+	void (*hardware_unsetup)(void);            /* __exit */
+	bool (*cpu_has_accelerated_tpr)(void);
+
+	/* Create, but do not attach this VCPU */
+	struct kvm_vcpu *(*vcpu_create)(struct kvm *kvm, unsigned id);
+	void (*vcpu_free)(struct kvm_vcpu *vcpu);
+	int (*vcpu_reset)(struct kvm_vcpu *vcpu);
+
+	void (*prepare_guest_switch)(struct kvm_vcpu *vcpu);
+	void (*vcpu_load)(struct kvm_vcpu *vcpu, int cpu);
+	void (*vcpu_put)(struct kvm_vcpu *vcpu);
+
+	int (*set_guest_debug)(struct kvm_vcpu *vcpu,
+			       struct kvm_debug_guest *dbg);
+	void (*guest_debug_pre)(struct kvm_vcpu *vcpu);
+	int (*get_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata);
+	int (*set_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 data);
+	u64 (*get_segment_base)(struct kvm_vcpu *vcpu, int seg);
+	void (*get_segment)(struct kvm_vcpu *vcpu,
+			    struct kvm_segment *var, int seg);
+	int (*get_cpl)(struct kvm_vcpu *vcpu);
+	void (*set_segment)(struct kvm_vcpu *vcpu,
+			    struct kvm_segment *var, int seg);
+	void (*get_cs_db_l_bits)(struct kvm_vcpu *vcpu, int *db, int *l);
+	void (*decache_cr4_guest_bits)(struct kvm_vcpu *vcpu);
+	void (*set_cr0)(struct kvm_vcpu *vcpu, unsigned long cr0);
+	void (*set_cr3)(struct kvm_vcpu *vcpu, unsigned long cr3);
+	void (*set_cr4)(struct kvm_vcpu *vcpu, unsigned long cr4);
+	void (*set_efer)(struct kvm_vcpu *vcpu, u64 efer);
+	void (*get_idt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
+	void (*set_idt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
+	void (*get_gdt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
+	void (*set_gdt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
+	unsigned long (*get_dr)(struct kvm_vcpu *vcpu, int dr);
+	void (*set_dr)(struct kvm_vcpu *vcpu, int dr, unsigned long value,
+		       int *exception);
+	void (*cache_reg)(struct kvm_vcpu *vcpu, enum kvm_reg reg);
+	unsigned long (*get_rflags)(struct kvm_vcpu *vcpu);
+	void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags);
+
+	void (*tlb_flush)(struct kvm_vcpu *vcpu);
+
+	void (*run)(struct kvm_vcpu *vcpu, struct kvm_run *run);
+	int (*handle_exit)(struct kvm_run *run, struct kvm_vcpu *vcpu);
+	void (*skip_emulated_instruction)(struct kvm_vcpu *vcpu);
+	void (*patch_hypercall)(struct kvm_vcpu *vcpu,
+				unsigned char *hypercall_addr);
+	int (*get_irq)(struct kvm_vcpu *vcpu);
+	void (*set_irq)(struct kvm_vcpu *vcpu, int vec);
+	void (*queue_exception)(struct kvm_vcpu *vcpu, unsigned nr,
+				bool has_error_code, u32 error_code);
+	bool (*exception_injected)(struct kvm_vcpu *vcpu);
+	void (*inject_pending_irq)(struct kvm_vcpu *vcpu);
+	void (*inject_pending_vectors)(struct kvm_vcpu *vcpu,
+				       struct kvm_run *run);
+
+	int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
+	int (*get_tdp_level)(void);
+};
+
+extern struct kvm_x86_ops *kvm_x86_ops;
+
+int kvm_mmu_module_init(void);
+void kvm_mmu_module_exit(void);
+
+void kvm_mmu_destroy(struct kvm_vcpu *vcpu);
+int kvm_mmu_create(struct kvm_vcpu *vcpu);
+int kvm_mmu_setup(struct kvm_vcpu *vcpu);
+void kvm_mmu_set_nonpresent_ptes(u64 trap_pte, u64 notrap_pte);
+void kvm_mmu_set_base_ptes(u64 base_pte);
+void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask,
+		u64 dirty_mask, u64 nx_mask, u64 x_mask);
+
+int kvm_mmu_reset_context(struct kvm_vcpu *vcpu);
+void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot);
+void kvm_mmu_zap_all(struct kvm *kvm);
+unsigned int kvm_mmu_calculate_mmu_pages(struct kvm *kvm);
+void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int kvm_nr_mmu_pages);
+
+int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3);
+
+int emulator_write_phys(struct kvm_vcpu *vcpu, gpa_t gpa,
+			  const void *val, int bytes);
+int kvm_pv_mmu_op(struct kvm_vcpu *vcpu, unsigned long bytes,
+		  gpa_t addr, unsigned long *ret);
+
+extern bool tdp_enabled;
+
+enum emulation_result {
+	EMULATE_DONE,       /* no further processing */
+	EMULATE_DO_MMIO,      /* kvm_run filled with mmio request */
+	EMULATE_FAIL,         /* can't emulate this instruction */
+};
+
+#define EMULTYPE_NO_DECODE	    (1 << 0)
+#define EMULTYPE_TRAP_UD	    (1 << 1)
+int emulate_instruction(struct kvm_vcpu *vcpu, struct kvm_run *run,
+			unsigned long cr2, u16 error_code, int emulation_type);
+void kvm_report_emulation_failure(struct kvm_vcpu *cvpu, const char *context);
+void realmode_lgdt(struct kvm_vcpu *vcpu, u16 size, unsigned long address);
+void realmode_lidt(struct kvm_vcpu *vcpu, u16 size, unsigned long address);
+void realmode_lmsw(struct kvm_vcpu *vcpu, unsigned long msw,
+		   unsigned long *rflags);
+
+unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr);
+void realmode_set_cr(struct kvm_vcpu *vcpu, int cr, unsigned long value,
+		     unsigned long *rflags);
+void kvm_enable_efer_bits(u64);
+int kvm_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *data);
+int kvm_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data);
+
+struct x86_emulate_ctxt;
+
+int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
+		     int size, unsigned port);
+int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
+			   int size, unsigned long count, int down,
+			    gva_t address, int rep, unsigned port);
+void kvm_emulate_cpuid(struct kvm_vcpu *vcpu);
+int kvm_emulate_halt(struct kvm_vcpu *vcpu);
+int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address);
+int emulate_clts(struct kvm_vcpu *vcpu);
+int emulator_get_dr(struct x86_emulate_ctxt *ctxt, int dr,
+		    unsigned long *dest);
+int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr,
+		    unsigned long value);
+
+void kvm_get_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg);
+int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
+				int type_bits, int seg);
+
+int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason);
+
+void kvm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0);
+void kvm_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3);
+void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
+void kvm_set_cr8(struct kvm_vcpu *vcpu, unsigned long cr8);
+unsigned long kvm_get_cr8(struct kvm_vcpu *vcpu);
+void kvm_lmsw(struct kvm_vcpu *vcpu, unsigned long msw);
+void kvm_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l);
+
+int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata);
+int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data);
+
+void kvm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr);
+void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code);
+void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long cr2,
+			   u32 error_code);
+
+void kvm_pic_set_irq(void *opaque, int irq, int level);
+
+void kvm_inject_nmi(struct kvm_vcpu *vcpu);
+
+void fx_init(struct kvm_vcpu *vcpu);
+
+int emulator_read_std(unsigned long addr,
+		      void *val,
+		      unsigned int bytes,
+		      struct kvm_vcpu *vcpu);
+int emulator_write_emulated(unsigned long addr,
+			    const void *val,
+			    unsigned int bytes,
+			    struct kvm_vcpu *vcpu);
+
+unsigned long segment_base(u16 selector);
+
+void kvm_mmu_flush_tlb(struct kvm_vcpu *vcpu);
+void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
+		       const u8 *new, int bytes);
+int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva);
+void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu);
+int kvm_mmu_load(struct kvm_vcpu *vcpu);
+void kvm_mmu_unload(struct kvm_vcpu *vcpu);
+void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu);
+
+int kvm_emulate_hypercall(struct kvm_vcpu *vcpu);
+
+int kvm_fix_hypercall(struct kvm_vcpu *vcpu);
+
+int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t gva, u32 error_code);
+void kvm_mmu_invlpg(struct kvm_vcpu *vcpu, gva_t gva);
+
+void kvm_enable_tdp(void);
+void kvm_disable_tdp(void);
+
+int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3);
+int complete_pio(struct kvm_vcpu *vcpu);
+
+static inline struct kvm_mmu_page *page_header(hpa_t shadow_page)
+{
+	struct page *page = pfn_to_page(shadow_page >> PAGE_SHIFT);
+
+	return (struct kvm_mmu_page *)page_private(page);
+}
+
+static inline u16 kvm_read_fs(void)
+{
+	u16 seg;
+	asm("mov %%fs, %0" : "=g"(seg));
+	return seg;
+}
+
+static inline u16 kvm_read_gs(void)
+{
+	u16 seg;
+	asm("mov %%gs, %0" : "=g"(seg));
+	return seg;
+}
+
+static inline u16 kvm_read_ldt(void)
+{
+	u16 ldt;
+	asm("sldt %0" : "=g"(ldt));
+	return ldt;
+}
+
+static inline void kvm_load_fs(u16 sel)
+{
+	asm("mov %0, %%fs" : : "rm"(sel));
+}
+
+static inline void kvm_load_gs(u16 sel)
+{
+	asm("mov %0, %%gs" : : "rm"(sel));
+}
+
+static inline void kvm_load_ldt(u16 sel)
+{
+	asm("lldt %0" : : "rm"(sel));
+}
+
+static inline void kvm_get_idt(struct descriptor_table *table)
+{
+	asm("sidt %0" : "=m"(*table));
+}
+
+static inline void kvm_get_gdt(struct descriptor_table *table)
+{
+	asm("sgdt %0" : "=m"(*table));
+}
+
+static inline unsigned long kvm_read_tr_base(void)
+{
+	u16 tr;
+	asm("str %0" : "=g"(tr));
+	return segment_base(tr);
+}
+
+#ifdef CONFIG_X86_64
+static inline unsigned long read_msr(unsigned long msr)
+{
+	u64 value;
+
+	rdmsrl(msr, value);
+	return value;
+}
+#endif
+
+static inline void kvm_fx_save(struct i387_fxsave_struct *image)
+{
+	asm("fxsave (%0)":: "r" (image));
+}
+
+static inline void kvm_fx_restore(struct i387_fxsave_struct *image)
+{
+	asm("fxrstor (%0)":: "r" (image));
+}
+
+static inline void kvm_fx_finit(void)
+{
+	asm("finit");
+}
+
+static inline u32 get_rdx_init_val(void)
+{
+	return 0x600; /* P6 family */
+}
+
+static inline void kvm_inject_gp(struct kvm_vcpu *vcpu, u32 error_code)
+{
+	kvm_queue_exception_e(vcpu, GP_VECTOR, error_code);
+}
+
+#define ASM_VMX_VMCLEAR_RAX       ".byte 0x66, 0x0f, 0xc7, 0x30"
+#define ASM_VMX_VMLAUNCH          ".byte 0x0f, 0x01, 0xc2"
+#define ASM_VMX_VMRESUME          ".byte 0x0f, 0x01, 0xc3"
+#define ASM_VMX_VMPTRLD_RAX       ".byte 0x0f, 0xc7, 0x30"
+#define ASM_VMX_VMREAD_RDX_RAX    ".byte 0x0f, 0x78, 0xd0"
+#define ASM_VMX_VMWRITE_RAX_RDX   ".byte 0x0f, 0x79, 0xd0"
+#define ASM_VMX_VMWRITE_RSP_RDX   ".byte 0x0f, 0x79, 0xd4"
+#define ASM_VMX_VMXOFF            ".byte 0x0f, 0x01, 0xc4"
+#define ASM_VMX_VMXON_RAX         ".byte 0xf3, 0x0f, 0xc7, 0x30"
+#define ASM_VMX_INVEPT		  ".byte 0x66, 0x0f, 0x38, 0x80, 0x08"
+#define ASM_VMX_INVVPID		  ".byte 0x66, 0x0f, 0x38, 0x81, 0x08"
+
+#define MSR_IA32_TIME_STAMP_COUNTER		0x010
+
+#define TSS_IOPB_BASE_OFFSET 0x66
+#define TSS_BASE_SIZE 0x68
+#define TSS_IOPB_SIZE (65536 / 8)
+#define TSS_REDIRECTION_SIZE (256 / 8)
+#define RMODE_TSS_SIZE							\
+	(TSS_BASE_SIZE + TSS_REDIRECTION_SIZE + TSS_IOPB_SIZE + 1)
+
+enum {
+	TASK_SWITCH_CALL = 0,
+	TASK_SWITCH_IRET = 1,
+	TASK_SWITCH_JMP = 2,
+	TASK_SWITCH_GATE = 3,
+};
+
+/*
+ * Hardware virtualization extension instructions may fault if a
+ * reboot turns off virtualization while processes are running.
+ * Trap the fault and ignore the instruction if that happens.
+ */
+asmlinkage void kvm_handle_fault_on_reboot(void);
+
+#define __kvm_handle_fault_on_reboot(insn) \
+	"666: " insn "\n\t" \
+	".pushsection .fixup, \"ax\" \n" \
+	"667: \n\t" \
+	__ASM_SIZE(push) " $666b \n\t"	      \
+	"jmp kvm_handle_fault_on_reboot \n\t" \
+	".popsection \n\t" \
+	".pushsection __ex_table, \"a\" \n\t" \
+	_ASM_PTR " 666b, 667b \n\t" \
+	".popsection"
+
+#define KVM_ARCH_WANT_MMU_NOTIFIER
+int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
+int kvm_age_hva(struct kvm *kvm, unsigned long hva);
+
+#endif /* _ASM_X86_KVM_HOST_H */
diff --git a/arch/x86/include/asm/kvm_para.h b/arch/x86/include/asm/kvm_para.h
new file mode 100644
index 0000000..b8a3305
--- /dev/null
+++ b/arch/x86/include/asm/kvm_para.h
@@ -0,0 +1,147 @@
+#ifndef _ASM_X86_KVM_PARA_H
+#define _ASM_X86_KVM_PARA_H
+
+/* This CPUID returns the signature 'KVMKVMKVM' in ebx, ecx, and edx.  It
+ * should be used to determine that a VM is running under KVM.
+ */
+#define KVM_CPUID_SIGNATURE	0x40000000
+
+/* This CPUID returns a feature bitmap in eax.  Before enabling a particular
+ * paravirtualization, the appropriate feature bit should be checked.
+ */
+#define KVM_CPUID_FEATURES	0x40000001
+#define KVM_FEATURE_CLOCKSOURCE		0
+#define KVM_FEATURE_NOP_IO_DELAY	1
+#define KVM_FEATURE_MMU_OP		2
+
+#define MSR_KVM_WALL_CLOCK  0x11
+#define MSR_KVM_SYSTEM_TIME 0x12
+
+#define KVM_MAX_MMU_OP_BATCH           32
+
+/* Operations for KVM_HC_MMU_OP */
+#define KVM_MMU_OP_WRITE_PTE            1
+#define KVM_MMU_OP_FLUSH_TLB	        2
+#define KVM_MMU_OP_RELEASE_PT	        3
+
+/* Payload for KVM_HC_MMU_OP */
+struct kvm_mmu_op_header {
+	__u32 op;
+	__u32 pad;
+};
+
+struct kvm_mmu_op_write_pte {
+	struct kvm_mmu_op_header header;
+	__u64 pte_phys;
+	__u64 pte_val;
+};
+
+struct kvm_mmu_op_flush_tlb {
+	struct kvm_mmu_op_header header;
+};
+
+struct kvm_mmu_op_release_pt {
+	struct kvm_mmu_op_header header;
+	__u64 pt_phys;
+};
+
+#ifdef __KERNEL__
+#include <asm/processor.h>
+
+extern void kvmclock_init(void);
+
+
+/* This instruction is vmcall.  On non-VT architectures, it will generate a
+ * trap that we will then rewrite to the appropriate instruction.
+ */
+#define KVM_HYPERCALL ".byte 0x0f,0x01,0xc1"
+
+/* For KVM hypercalls, a three-byte sequence of either the vmrun or the vmmrun
+ * instruction.  The hypervisor may replace it with something else but only the
+ * instructions are guaranteed to be supported.
+ *
+ * Up to four arguments may be passed in rbx, rcx, rdx, and rsi respectively.
+ * The hypercall number should be placed in rax and the return value will be
+ * placed in rax.  No other registers will be clobbered unless explicited
+ * noted by the particular hypercall.
+ */
+
+static inline long kvm_hypercall0(unsigned int nr)
+{
+	long ret;
+	asm volatile(KVM_HYPERCALL
+		     : "=a"(ret)
+		     : "a"(nr)
+		     : "memory");
+	return ret;
+}
+
+static inline long kvm_hypercall1(unsigned int nr, unsigned long p1)
+{
+	long ret;
+	asm volatile(KVM_HYPERCALL
+		     : "=a"(ret)
+		     : "a"(nr), "b"(p1)
+		     : "memory");
+	return ret;
+}
+
+static inline long kvm_hypercall2(unsigned int nr, unsigned long p1,
+				  unsigned long p2)
+{
+	long ret;
+	asm volatile(KVM_HYPERCALL
+		     : "=a"(ret)
+		     : "a"(nr), "b"(p1), "c"(p2)
+		     : "memory");
+	return ret;
+}
+
+static inline long kvm_hypercall3(unsigned int nr, unsigned long p1,
+				  unsigned long p2, unsigned long p3)
+{
+	long ret;
+	asm volatile(KVM_HYPERCALL
+		     : "=a"(ret)
+		     : "a"(nr), "b"(p1), "c"(p2), "d"(p3)
+		     : "memory");
+	return ret;
+}
+
+static inline long kvm_hypercall4(unsigned int nr, unsigned long p1,
+				  unsigned long p2, unsigned long p3,
+				  unsigned long p4)
+{
+	long ret;
+	asm volatile(KVM_HYPERCALL
+		     : "=a"(ret)
+		     : "a"(nr), "b"(p1), "c"(p2), "d"(p3), "S"(p4)
+		     : "memory");
+	return ret;
+}
+
+static inline int kvm_para_available(void)
+{
+	unsigned int eax, ebx, ecx, edx;
+	char signature[13];
+
+	cpuid(KVM_CPUID_SIGNATURE, &eax, &ebx, &ecx, &edx);
+	memcpy(signature + 0, &ebx, 4);
+	memcpy(signature + 4, &ecx, 4);
+	memcpy(signature + 8, &edx, 4);
+	signature[12] = 0;
+
+	if (strcmp(signature, "KVMKVMKVM") == 0)
+		return 1;
+
+	return 0;
+}
+
+static inline unsigned int kvm_arch_para_features(void)
+{
+	return cpuid_eax(KVM_CPUID_FEATURES);
+}
+
+#endif
+
+#endif /* _ASM_X86_KVM_PARA_H */
diff --git a/arch/x86/include/asm/kvm_x86_emulate.h b/arch/x86/include/asm/kvm_x86_emulate.h
new file mode 100644
index 0000000..25179a2
--- /dev/null
+++ b/arch/x86/include/asm/kvm_x86_emulate.h
@@ -0,0 +1,184 @@
+/******************************************************************************
+ * x86_emulate.h
+ *
+ * Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
+ *
+ * Copyright (c) 2005 Keir Fraser
+ *
+ * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
+ */
+
+#ifndef _ASM_X86_KVM_X86_EMULATE_H
+#define _ASM_X86_KVM_X86_EMULATE_H
+
+struct x86_emulate_ctxt;
+
+/*
+ * x86_emulate_ops:
+ *
+ * These operations represent the instruction emulator's interface to memory.
+ * There are two categories of operation: those that act on ordinary memory
+ * regions (*_std), and those that act on memory regions known to require
+ * special treatment or emulation (*_emulated).
+ *
+ * The emulator assumes that an instruction accesses only one 'emulated memory'
+ * location, that this location is the given linear faulting address (cr2), and
+ * that this is one of the instruction's data operands. Instruction fetches and
+ * stack operations are assumed never to access emulated memory. The emulator
+ * automatically deduces which operand of a string-move operation is accessing
+ * emulated memory, and assumes that the other operand accesses normal memory.
+ *
+ * NOTES:
+ *  1. The emulator isn't very smart about emulated vs. standard memory.
+ *     'Emulated memory' access addresses should be checked for sanity.
+ *     'Normal memory' accesses may fault, and the caller must arrange to
+ *     detect and handle reentrancy into the emulator via recursive faults.
+ *     Accesses may be unaligned and may cross page boundaries.
+ *  2. If the access fails (cannot emulate, or a standard access faults) then
+ *     it is up to the memop to propagate the fault to the guest VM via
+ *     some out-of-band mechanism, unknown to the emulator. The memop signals
+ *     failure by returning X86EMUL_PROPAGATE_FAULT to the emulator, which will
+ *     then immediately bail.
+ *  3. Valid access sizes are 1, 2, 4 and 8 bytes. On x86/32 systems only
+ *     cmpxchg8b_emulated need support 8-byte accesses.
+ *  4. The emulator cannot handle 64-bit mode emulation on an x86/32 system.
+ */
+/* Access completed successfully: continue emulation as normal. */
+#define X86EMUL_CONTINUE        0
+/* Access is unhandleable: bail from emulation and return error to caller. */
+#define X86EMUL_UNHANDLEABLE    1
+/* Terminate emulation but return success to the caller. */
+#define X86EMUL_PROPAGATE_FAULT 2 /* propagate a generated fault to guest */
+#define X86EMUL_RETRY_INSTR     2 /* retry the instruction for some reason */
+#define X86EMUL_CMPXCHG_FAILED  2 /* cmpxchg did not see expected value */
+struct x86_emulate_ops {
+	/*
+	 * read_std: Read bytes of standard (non-emulated/special) memory.
+	 *           Used for instruction fetch, stack operations, and others.
+	 *  @addr:  [IN ] Linear address from which to read.
+	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
+	 *  @bytes: [IN ] Number of bytes to read from memory.
+	 */
+	int (*read_std)(unsigned long addr, void *val,
+			unsigned int bytes, struct kvm_vcpu *vcpu);
+
+	/*
+	 * read_emulated: Read bytes from emulated/special memory area.
+	 *  @addr:  [IN ] Linear address from which to read.
+	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
+	 *  @bytes: [IN ] Number of bytes to read from memory.
+	 */
+	int (*read_emulated)(unsigned long addr,
+			     void *val,
+			     unsigned int bytes,
+			     struct kvm_vcpu *vcpu);
+
+	/*
+	 * write_emulated: Read bytes from emulated/special memory area.
+	 *  @addr:  [IN ] Linear address to which to write.
+	 *  @val:   [IN ] Value to write to memory (low-order bytes used as
+	 *                required).
+	 *  @bytes: [IN ] Number of bytes to write to memory.
+	 */
+	int (*write_emulated)(unsigned long addr,
+			      const void *val,
+			      unsigned int bytes,
+			      struct kvm_vcpu *vcpu);
+
+	/*
+	 * cmpxchg_emulated: Emulate an atomic (LOCKed) CMPXCHG operation on an
+	 *                   emulated/special memory area.
+	 *  @addr:  [IN ] Linear address to access.
+	 *  @old:   [IN ] Value expected to be current at @addr.
+	 *  @new:   [IN ] Value to write to @addr.
+	 *  @bytes: [IN ] Number of bytes to access using CMPXCHG.
+	 */
+	int (*cmpxchg_emulated)(unsigned long addr,
+				const void *old,
+				const void *new,
+				unsigned int bytes,
+				struct kvm_vcpu *vcpu);
+
+};
+
+/* Type, address-of, and value of an instruction's operand. */
+struct operand {
+	enum { OP_REG, OP_MEM, OP_IMM, OP_NONE } type;
+	unsigned int bytes;
+	unsigned long val, orig_val, *ptr;
+};
+
+struct fetch_cache {
+	u8 data[15];
+	unsigned long start;
+	unsigned long end;
+};
+
+struct decode_cache {
+	u8 twobyte;
+	u8 b;
+	u8 lock_prefix;
+	u8 rep_prefix;
+	u8 op_bytes;
+	u8 ad_bytes;
+	u8 rex_prefix;
+	struct operand src;
+	struct operand dst;
+	bool has_seg_override;
+	u8 seg_override;
+	unsigned int d;
+	unsigned long regs[NR_VCPU_REGS];
+	unsigned long eip;
+	/* modrm */
+	u8 modrm;
+	u8 modrm_mod;
+	u8 modrm_reg;
+	u8 modrm_rm;
+	u8 use_modrm_ea;
+	bool rip_relative;
+	unsigned long modrm_ea;
+	void *modrm_ptr;
+	unsigned long modrm_val;
+	struct fetch_cache fetch;
+};
+
+struct x86_emulate_ctxt {
+	/* Register state before/after emulation. */
+	struct kvm_vcpu *vcpu;
+
+	/* Linear faulting address (if emulating a page-faulting instruction) */
+	unsigned long eflags;
+
+	/* Emulated execution mode, represented by an X86EMUL_MODE value. */
+	int mode;
+
+	u32 cs_base;
+
+	/* decode cache */
+
+	struct decode_cache decode;
+};
+
+/* Repeat String Operation Prefix */
+#define REPE_PREFIX  1
+#define REPNE_PREFIX    2
+
+/* Execution mode, passed to the emulator. */
+#define X86EMUL_MODE_REAL     0	/* Real mode.             */
+#define X86EMUL_MODE_PROT16   2	/* 16-bit protected mode. */
+#define X86EMUL_MODE_PROT32   4	/* 32-bit protected mode. */
+#define X86EMUL_MODE_PROT64   8	/* 64-bit (long) mode.    */
+
+/* Host execution mode. */
+#if defined(__i386__)
+#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT32
+#elif defined(CONFIG_X86_64)
+#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT64
+#endif
+
+int x86_decode_insn(struct x86_emulate_ctxt *ctxt,
+		    struct x86_emulate_ops *ops);
+int x86_emulate_insn(struct x86_emulate_ctxt *ctxt,
+		     struct x86_emulate_ops *ops);
+
+#endif /* _ASM_X86_KVM_X86_EMULATE_H */
diff --git a/arch/x86/include/asm/ldt.h b/arch/x86/include/asm/ldt.h
new file mode 100644
index 0000000..46727eb
--- /dev/null
+++ b/arch/x86/include/asm/ldt.h
@@ -0,0 +1,40 @@
+/*
+ * ldt.h
+ *
+ * Definitions of structures used with the modify_ldt system call.
+ */
+#ifndef _ASM_X86_LDT_H
+#define _ASM_X86_LDT_H
+
+/* Maximum number of LDT entries supported. */
+#define LDT_ENTRIES	8192
+/* The size of each LDT entry. */
+#define LDT_ENTRY_SIZE	8
+
+#ifndef __ASSEMBLY__
+/*
+ * Note on 64bit base and limit is ignored and you cannot set DS/ES/CS
+ * not to the default values if you still want to do syscalls. This
+ * call is more for 32bit mode therefore.
+ */
+struct user_desc {
+	unsigned int  entry_number;
+	unsigned int  base_addr;
+	unsigned int  limit;
+	unsigned int  seg_32bit:1;
+	unsigned int  contents:2;
+	unsigned int  read_exec_only:1;
+	unsigned int  limit_in_pages:1;
+	unsigned int  seg_not_present:1;
+	unsigned int  useable:1;
+#ifdef __x86_64__
+	unsigned int  lm:1;
+#endif
+};
+
+#define MODIFY_LDT_CONTENTS_DATA	0
+#define MODIFY_LDT_CONTENTS_STACK	1
+#define MODIFY_LDT_CONTENTS_CODE	2
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_X86_LDT_H */
diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h
new file mode 100644
index 0000000..d28a507
--- /dev/null
+++ b/arch/x86/include/asm/lguest.h
@@ -0,0 +1,94 @@
+#ifndef _ASM_X86_LGUEST_H
+#define _ASM_X86_LGUEST_H
+
+#define GDT_ENTRY_LGUEST_CS	10
+#define GDT_ENTRY_LGUEST_DS	11
+#define LGUEST_CS		(GDT_ENTRY_LGUEST_CS * 8)
+#define LGUEST_DS		(GDT_ENTRY_LGUEST_DS * 8)
+
+#ifndef __ASSEMBLY__
+#include <asm/desc.h>
+
+#define GUEST_PL 1
+
+/* Every guest maps the core switcher code. */
+#define SHARED_SWITCHER_PAGES \
+	DIV_ROUND_UP(end_switcher_text - start_switcher_text, PAGE_SIZE)
+/* Pages for switcher itself, then two pages per cpu */
+#define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * NR_CPUS)
+
+/* We map at -4M for ease of mapping into the guest (one PTE page). */
+#define SWITCHER_ADDR 0xFFC00000
+
+/* Found in switcher.S */
+extern unsigned long default_idt_entries[];
+
+/* Declarations for definitions in lguest_guest.S */
+extern char lguest_noirq_start[], lguest_noirq_end[];
+extern const char lgstart_cli[], lgend_cli[];
+extern const char lgstart_sti[], lgend_sti[];
+extern const char lgstart_popf[], lgend_popf[];
+extern const char lgstart_pushf[], lgend_pushf[];
+extern const char lgstart_iret[], lgend_iret[];
+
+extern void lguest_iret(void);
+extern void lguest_init(void);
+
+struct lguest_regs {
+	/* Manually saved part. */
+	unsigned long eax, ebx, ecx, edx;
+	unsigned long esi, edi, ebp;
+	unsigned long gs;
+	unsigned long fs, ds, es;
+	unsigned long trapnum, errcode;
+	/* Trap pushed part */
+	unsigned long eip;
+	unsigned long cs;
+	unsigned long eflags;
+	unsigned long esp;
+	unsigned long ss;
+};
+
+/* This is a guest-specific page (mapped ro) into the guest. */
+struct lguest_ro_state {
+	/* Host information we need to restore when we switch back. */
+	u32 host_cr3;
+	struct desc_ptr host_idt_desc;
+	struct desc_ptr host_gdt_desc;
+	u32 host_sp;
+
+	/* Fields which are used when guest is running. */
+	struct desc_ptr guest_idt_desc;
+	struct desc_ptr guest_gdt_desc;
+	struct x86_hw_tss guest_tss;
+	struct desc_struct guest_idt[IDT_ENTRIES];
+	struct desc_struct guest_gdt[GDT_ENTRIES];
+};
+
+struct lg_cpu_arch {
+	/* The GDT entries copied into lguest_ro_state when running. */
+	struct desc_struct gdt[GDT_ENTRIES];
+
+	/* The IDT entries: some copied into lguest_ro_state when running. */
+	struct desc_struct idt[IDT_ENTRIES];
+
+	/* The address of the last guest-visible pagefault (ie. cr2). */
+	unsigned long last_pagefault;
+};
+
+static inline void lguest_set_ts(void)
+{
+	u32 cr0;
+
+	cr0 = read_cr0();
+	if (!(cr0 & 8))
+		write_cr0(cr0 | 8);
+}
+
+/* Full 4G segment descriptors, suitable for CS and DS. */
+#define FULL_EXEC_SEGMENT ((struct desc_struct){ { {0x0000ffff, 0x00cf9b00} } })
+#define FULL_SEGMENT ((struct desc_struct){ { {0x0000ffff, 0x00cf9300} } })
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_LGUEST_H */
diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
new file mode 100644
index 0000000..4389442
--- /dev/null
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -0,0 +1,71 @@
+/* Architecture specific portion of the lguest hypercalls */
+#ifndef _ASM_X86_LGUEST_HCALL_H
+#define _ASM_X86_LGUEST_HCALL_H
+
+#define LHCALL_FLUSH_ASYNC	0
+#define LHCALL_LGUEST_INIT	1
+#define LHCALL_SHUTDOWN		2
+#define LHCALL_LOAD_GDT		3
+#define LHCALL_NEW_PGTABLE	4
+#define LHCALL_FLUSH_TLB	5
+#define LHCALL_LOAD_IDT_ENTRY	6
+#define LHCALL_SET_STACK	7
+#define LHCALL_TS		8
+#define LHCALL_SET_CLOCKEVENT	9
+#define LHCALL_HALT		10
+#define LHCALL_SET_PTE		14
+#define LHCALL_SET_PMD		15
+#define LHCALL_LOAD_TLS		16
+#define LHCALL_NOTIFY		17
+
+#define LGUEST_TRAP_ENTRY 0x1F
+
+/* Argument number 3 to LHCALL_LGUEST_SHUTDOWN */
+#define LGUEST_SHUTDOWN_POWEROFF	1
+#define LGUEST_SHUTDOWN_RESTART		2
+
+#ifndef __ASSEMBLY__
+#include <asm/hw_irq.h>
+
+/*G:031 But first, how does our Guest contact the Host to ask for privileged
+ * operations?  There are two ways: the direct way is to make a "hypercall",
+ * to make requests of the Host Itself.
+ *
+ * Our hypercall mechanism uses the highest unused trap code (traps 32 and
+ * above are used by real hardware interrupts).  Fifteen hypercalls are
+ * available: the hypercall number is put in the %eax register, and the
+ * arguments (when required) are placed in %edx, %ebx and %ecx.  If a return
+ * value makes sense, it's returned in %eax.
+ *
+ * Grossly invalid calls result in Sudden Death at the hands of the vengeful
+ * Host, rather than returning failure.  This reflects Winston Churchill's
+ * definition of a gentleman: "someone who is only rude intentionally". */
+static inline unsigned long
+hcall(unsigned long call,
+      unsigned long arg1, unsigned long arg2, unsigned long arg3)
+{
+	/* "int" is the Intel instruction to trigger a trap. */
+	asm volatile("int $" __stringify(LGUEST_TRAP_ENTRY)
+		     /* The call in %eax (aka "a") might be overwritten */
+		     : "=a"(call)
+		       /* The arguments are in %eax, %edx, %ebx & %ecx */
+		     : "a"(call), "d"(arg1), "b"(arg2), "c"(arg3)
+		       /* "memory" means this might write somewhere in memory.
+			* This isn't true for all calls, but it's safe to tell
+			* gcc that it might happen so it doesn't get clever. */
+		     : "memory");
+	return call;
+}
+/*:*/
+
+/* Can't use our min() macro here: needs to be a constant */
+#define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32)
+
+#define LHCALL_RING_SIZE 64
+struct hcall_args {
+	/* These map directly onto eax, ebx, ecx, edx in struct lguest_regs */
+	unsigned long arg0, arg2, arg3, arg1;
+};
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_X86_LGUEST_HCALL_H */
diff --git a/arch/x86/include/asm/linkage.h b/arch/x86/include/asm/linkage.h
new file mode 100644
index 0000000..f61ee8f
--- /dev/null
+++ b/arch/x86/include/asm/linkage.h
@@ -0,0 +1,61 @@
+#ifndef _ASM_X86_LINKAGE_H
+#define _ASM_X86_LINKAGE_H
+
+#undef notrace
+#define notrace __attribute__((no_instrument_function))
+
+#ifdef CONFIG_X86_64
+#define __ALIGN .p2align 4,,15
+#define __ALIGN_STR ".p2align 4,,15"
+#endif
+
+#ifdef CONFIG_X86_32
+#define asmlinkage CPP_ASMLINKAGE __attribute__((regparm(0)))
+/*
+ * For 32-bit UML - mark functions implemented in assembly that use
+ * regparm input parameters:
+ */
+#define asmregparm __attribute__((regparm(3)))
+
+/*
+ * Make sure the compiler doesn't do anything stupid with the
+ * arguments on the stack - they are owned by the *caller*, not
+ * the callee. This just fools gcc into not spilling into them,
+ * and keeps it from doing tailcall recursion and/or using the
+ * stack slots for temporaries, since they are live and "used"
+ * all the way to the end of the function.
+ *
+ * NOTE! On x86-64, all the arguments are in registers, so this
+ * only matters on a 32-bit kernel.
+ */
+#define asmlinkage_protect(n, ret, args...) \
+	__asmlinkage_protect##n(ret, ##args)
+#define __asmlinkage_protect_n(ret, args...) \
+	__asm__ __volatile__ ("" : "=r" (ret) : "0" (ret), ##args)
+#define __asmlinkage_protect0(ret) \
+	__asmlinkage_protect_n(ret)
+#define __asmlinkage_protect1(ret, arg1) \
+	__asmlinkage_protect_n(ret, "g" (arg1))
+#define __asmlinkage_protect2(ret, arg1, arg2) \
+	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2))
+#define __asmlinkage_protect3(ret, arg1, arg2, arg3) \
+	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3))
+#define __asmlinkage_protect4(ret, arg1, arg2, arg3, arg4) \
+	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
+			      "g" (arg4))
+#define __asmlinkage_protect5(ret, arg1, arg2, arg3, arg4, arg5) \
+	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
+			      "g" (arg4), "g" (arg5))
+#define __asmlinkage_protect6(ret, arg1, arg2, arg3, arg4, arg5, arg6) \
+	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
+			      "g" (arg4), "g" (arg5), "g" (arg6))
+
+#endif
+
+#ifdef CONFIG_X86_ALIGNMENT_16
+#define __ALIGN .align 16,0x90
+#define __ALIGN_STR ".align 16,0x90"
+#endif
+
+#endif /* _ASM_X86_LINKAGE_H */
+
diff --git a/arch/x86/include/asm/local.h b/arch/x86/include/asm/local.h
new file mode 100644
index 0000000..47b9b6f
--- /dev/null
+++ b/arch/x86/include/asm/local.h
@@ -0,0 +1,235 @@
+#ifndef _ASM_X86_LOCAL_H
+#define _ASM_X86_LOCAL_H
+
+#include <linux/percpu.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/asm.h>
+
+typedef struct {
+	atomic_long_t a;
+} local_t;
+
+#define LOCAL_INIT(i)	{ ATOMIC_LONG_INIT(i) }
+
+#define local_read(l)	atomic_long_read(&(l)->a)
+#define local_set(l, i)	atomic_long_set(&(l)->a, (i))
+
+static inline void local_inc(local_t *l)
+{
+	asm volatile(_ASM_INC "%0"
+		     : "+m" (l->a.counter));
+}
+
+static inline void local_dec(local_t *l)
+{
+	asm volatile(_ASM_DEC "%0"
+		     : "+m" (l->a.counter));
+}
+
+static inline void local_add(long i, local_t *l)
+{
+	asm volatile(_ASM_ADD "%1,%0"
+		     : "+m" (l->a.counter)
+		     : "ir" (i));
+}
+
+static inline void local_sub(long i, local_t *l)
+{
+	asm volatile(_ASM_SUB "%1,%0"
+		     : "+m" (l->a.counter)
+		     : "ir" (i));
+}
+
+/**
+ * local_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @l: pointer to type local_t
+ *
+ * Atomically subtracts @i from @l and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int local_sub_and_test(long i, local_t *l)
+{
+	unsigned char c;
+
+	asm volatile(_ASM_SUB "%2,%0; sete %1"
+		     : "+m" (l->a.counter), "=qm" (c)
+		     : "ir" (i) : "memory");
+	return c;
+}
+
+/**
+ * local_dec_and_test - decrement and test
+ * @l: pointer to type local_t
+ *
+ * Atomically decrements @l by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+static inline int local_dec_and_test(local_t *l)
+{
+	unsigned char c;
+
+	asm volatile(_ASM_DEC "%0; sete %1"
+		     : "+m" (l->a.counter), "=qm" (c)
+		     : : "memory");
+	return c != 0;
+}
+
+/**
+ * local_inc_and_test - increment and test
+ * @l: pointer to type local_t
+ *
+ * Atomically increments @l by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int local_inc_and_test(local_t *l)
+{
+	unsigned char c;
+
+	asm volatile(_ASM_INC "%0; sete %1"
+		     : "+m" (l->a.counter), "=qm" (c)
+		     : : "memory");
+	return c != 0;
+}
+
+/**
+ * local_add_negative - add and test if negative
+ * @i: integer value to add
+ * @l: pointer to type local_t
+ *
+ * Atomically adds @i to @l and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+static inline int local_add_negative(long i, local_t *l)
+{
+	unsigned char c;
+
+	asm volatile(_ASM_ADD "%2,%0; sets %1"
+		     : "+m" (l->a.counter), "=qm" (c)
+		     : "ir" (i) : "memory");
+	return c;
+}
+
+/**
+ * local_add_return - add and return
+ * @i: integer value to add
+ * @l: pointer to type local_t
+ *
+ * Atomically adds @i to @l and returns @i + @l
+ */
+static inline long local_add_return(long i, local_t *l)
+{
+	long __i;
+#ifdef CONFIG_M386
+	unsigned long flags;
+	if (unlikely(boot_cpu_data.x86 <= 3))
+		goto no_xadd;
+#endif
+	/* Modern 486+ processor */
+	__i = i;
+	asm volatile(_ASM_XADD "%0, %1;"
+		     : "+r" (i), "+m" (l->a.counter)
+		     : : "memory");
+	return i + __i;
+
+#ifdef CONFIG_M386
+no_xadd: /* Legacy 386 processor */
+	local_irq_save(flags);
+	__i = local_read(l);
+	local_set(l, i + __i);
+	local_irq_restore(flags);
+	return i + __i;
+#endif
+}
+
+static inline long local_sub_return(long i, local_t *l)
+{
+	return local_add_return(-i, l);
+}
+
+#define local_inc_return(l)  (local_add_return(1, l))
+#define local_dec_return(l)  (local_sub_return(1, l))
+
+#define local_cmpxchg(l, o, n) \
+	(cmpxchg_local(&((l)->a.counter), (o), (n)))
+/* Always has a lock prefix */
+#define local_xchg(l, n) (xchg(&((l)->a.counter), (n)))
+
+/**
+ * local_add_unless - add unless the number is a given value
+ * @l: pointer of type local_t
+ * @a: the amount to add to l...
+ * @u: ...unless l is equal to u.
+ *
+ * Atomically adds @a to @l, so long as it was not @u.
+ * Returns non-zero if @l was not @u, and zero otherwise.
+ */
+#define local_add_unless(l, a, u)				\
+({								\
+	long c, old;						\
+	c = local_read((l));					\
+	for (;;) {						\
+		if (unlikely(c == (u)))				\
+			break;					\
+		old = local_cmpxchg((l), c, c + (a));		\
+		if (likely(old == c))				\
+			break;					\
+		c = old;					\
+	}							\
+	c != (u);						\
+})
+#define local_inc_not_zero(l) local_add_unless((l), 1, 0)
+
+/* On x86_32, these are no better than the atomic variants.
+ * On x86-64 these are better than the atomic variants on SMP kernels
+ * because they dont use a lock prefix.
+ */
+#define __local_inc(l)		local_inc(l)
+#define __local_dec(l)		local_dec(l)
+#define __local_add(i, l)	local_add((i), (l))
+#define __local_sub(i, l)	local_sub((i), (l))
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations.  Note they take
+ * a variable, not an address.
+ *
+ * X86_64: This could be done better if we moved the per cpu data directly
+ * after GS.
+ */
+
+/* Need to disable preemption for the cpu local counters otherwise we could
+   still access a variable of a previous CPU in a non atomic way. */
+#define cpu_local_wrap_v(l)		\
+({					\
+	local_t res__;			\
+	preempt_disable(); 		\
+	res__ = (l);			\
+	preempt_enable();		\
+	res__;				\
+})
+#define cpu_local_wrap(l)		\
+({					\
+	preempt_disable();		\
+	(l);				\
+	preempt_enable();		\
+})					\
+
+#define cpu_local_read(l)    cpu_local_wrap_v(local_read(&__get_cpu_var((l))))
+#define cpu_local_set(l, i)  cpu_local_wrap(local_set(&__get_cpu_var((l)), (i)))
+#define cpu_local_inc(l)     cpu_local_wrap(local_inc(&__get_cpu_var((l))))
+#define cpu_local_dec(l)     cpu_local_wrap(local_dec(&__get_cpu_var((l))))
+#define cpu_local_add(i, l)  cpu_local_wrap(local_add((i), &__get_cpu_var((l))))
+#define cpu_local_sub(i, l)  cpu_local_wrap(local_sub((i), &__get_cpu_var((l))))
+
+#define __cpu_local_inc(l)	cpu_local_inc((l))
+#define __cpu_local_dec(l)	cpu_local_dec((l))
+#define __cpu_local_add(i, l)	cpu_local_add((i), (l))
+#define __cpu_local_sub(i, l)	cpu_local_sub((i), (l))
+
+#endif /* _ASM_X86_LOCAL_H */
diff --git a/arch/x86/include/asm/mach-default/apm.h b/arch/x86/include/asm/mach-default/apm.h
new file mode 100644
index 0000000..20370c6
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/apm.h
@@ -0,0 +1,73 @@
+/*
+ *  Machine specific APM BIOS functions for generic.
+ *  Split out from apm.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+
+#ifndef _ASM_X86_MACH_DEFAULT_APM_H
+#define _ASM_X86_MACH_DEFAULT_APM_H
+
+#ifdef APM_ZERO_SEGS
+#	define APM_DO_ZERO_SEGS \
+		"pushl %%ds\n\t" \
+		"pushl %%es\n\t" \
+		"xorl %%edx, %%edx\n\t" \
+		"mov %%dx, %%ds\n\t" \
+		"mov %%dx, %%es\n\t" \
+		"mov %%dx, %%fs\n\t" \
+		"mov %%dx, %%gs\n\t"
+#	define APM_DO_POP_SEGS \
+		"popl %%es\n\t" \
+		"popl %%ds\n\t"
+#else
+#	define APM_DO_ZERO_SEGS
+#	define APM_DO_POP_SEGS
+#endif
+
+static inline void apm_bios_call_asm(u32 func, u32 ebx_in, u32 ecx_in,
+					u32 *eax, u32 *ebx, u32 *ecx,
+					u32 *edx, u32 *esi)
+{
+	/*
+	 * N.B. We do NOT need a cld after the BIOS call
+	 * because we always save and restore the flags.
+	 */
+	__asm__ __volatile__(APM_DO_ZERO_SEGS
+		"pushl %%edi\n\t"
+		"pushl %%ebp\n\t"
+		"lcall *%%cs:apm_bios_entry\n\t"
+		"setc %%al\n\t"
+		"popl %%ebp\n\t"
+		"popl %%edi\n\t"
+		APM_DO_POP_SEGS
+		: "=a" (*eax), "=b" (*ebx), "=c" (*ecx), "=d" (*edx),
+		  "=S" (*esi)
+		: "a" (func), "b" (ebx_in), "c" (ecx_in)
+		: "memory", "cc");
+}
+
+static inline u8 apm_bios_call_simple_asm(u32 func, u32 ebx_in,
+						u32 ecx_in, u32 *eax)
+{
+	int	cx, dx, si;
+	u8	error;
+
+	/*
+	 * N.B. We do NOT need a cld after the BIOS call
+	 * because we always save and restore the flags.
+	 */
+	__asm__ __volatile__(APM_DO_ZERO_SEGS
+		"pushl %%edi\n\t"
+		"pushl %%ebp\n\t"
+		"lcall *%%cs:apm_bios_entry\n\t"
+		"setc %%bl\n\t"
+		"popl %%ebp\n\t"
+		"popl %%edi\n\t"
+		APM_DO_POP_SEGS
+		: "=a" (*eax), "=b" (error), "=c" (cx), "=d" (dx),
+		  "=S" (si)
+		: "a" (func), "b" (ebx_in), "c" (ecx_in)
+		: "memory", "cc");
+	return error;
+}
+
+#endif /* _ASM_X86_MACH_DEFAULT_APM_H */
diff --git a/include/asm-x86/mach-default/do_timer.h b/arch/x86/include/asm/mach-default/do_timer.h
similarity index 100%
rename from include/asm-x86/mach-default/do_timer.h
rename to arch/x86/include/asm/mach-default/do_timer.h
diff --git a/include/asm-x86/mach-default/entry_arch.h b/arch/x86/include/asm/mach-default/entry_arch.h
similarity index 100%
rename from include/asm-x86/mach-default/entry_arch.h
rename to arch/x86/include/asm/mach-default/entry_arch.h
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
new file mode 100644
index 0000000..ff3a6c2
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -0,0 +1,156 @@
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_APIC_H
+#define _ASM_X86_MACH_DEFAULT_MACH_APIC_H
+
+#ifdef CONFIG_X86_LOCAL_APIC
+
+#include <mach_apicdef.h>
+#include <asm/smp.h>
+
+#define APIC_DFR_VALUE	(APIC_DFR_FLAT)
+
+static inline cpumask_t target_cpus(void)
+{ 
+#ifdef CONFIG_SMP
+	return cpu_online_map;
+#else
+	return cpumask_of_cpu(0);
+#endif
+} 
+
+#define NO_BALANCE_IRQ (0)
+#define esr_disable (0)
+
+#ifdef CONFIG_X86_64
+#include <asm/genapic.h>
+#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
+#define INT_DEST_MODE (genapic->int_dest_mode)
+#define TARGET_CPUS	  (genapic->target_cpus())
+#define apic_id_registered (genapic->apic_id_registered)
+#define init_apic_ldr (genapic->init_apic_ldr)
+#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
+#define phys_pkg_id	(genapic->phys_pkg_id)
+#define vector_allocation_domain    (genapic->vector_allocation_domain)
+#define read_apic_id()  (GET_APIC_ID(apic_read(APIC_ID)))
+#define send_IPI_self (genapic->send_IPI_self)
+extern void setup_apic_routing(void);
+#else
+#define INT_DELIVERY_MODE dest_LowestPrio
+#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
+#define TARGET_CPUS (target_cpus())
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+	unsigned long val;
+
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
+	apic_write(APIC_LDR, val);
+}
+
+static inline int apic_id_registered(void)
+{
+	return physid_isset(read_apic_id(), phys_cpu_present_map);
+}
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	return cpus_addr(cpumask)[0];
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+static inline void setup_apic_routing(void)
+{
+#ifdef CONFIG_X86_IO_APIC
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+					"Flat", nr_ioapics);
+#endif
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+#ifdef CONFIG_SMP
+	return apicid_2_node[hard_smp_processor_id()];
+#else
+	return 0;
+#endif
+}
+
+static inline cpumask_t vector_allocation_domain(int cpu)
+{
+        /* Careful. Some cpus do not strictly honor the set of cpus
+         * specified in the interrupt destination when using lowest
+         * priority interrupt delivery mode.
+         *
+         * In particular there was a hyperthreading cpu observed to
+         * deliver interrupts to the wrong hyperthread when only one
+         * hyperthread was specified in the interrupt desitination.
+         */
+        cpumask_t domain = { { [0] = APIC_ALL_CPUS, } };
+        return domain;
+}
+#endif
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+
+static inline unsigned long check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	return phys_map;
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+	return 0;
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+	return 1 << cpu;
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < NR_CPUS && cpu_present(mps_cpu))
+		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
+	else
+		return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+{
+	return physid_mask_of_physid(phys_apicid);
+}
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+#endif /* CONFIG_X86_LOCAL_APIC */
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_APIC_H */
diff --git a/arch/x86/include/asm/mach-default/mach_apicdef.h b/arch/x86/include/asm/mach-default/mach_apicdef.h
new file mode 100644
index 0000000..5317993
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/mach_apicdef.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_APICDEF_H
+#define _ASM_X86_MACH_DEFAULT_MACH_APICDEF_H
+
+#include <asm/apic.h>
+
+#ifdef CONFIG_X86_64
+#define	APIC_ID_MASK		(genapic->apic_id_mask)
+#define GET_APIC_ID(x)		(genapic->get_apic_id(x))
+#define	SET_APIC_ID(x)		(genapic->set_apic_id(x))
+#else
+#define		APIC_ID_MASK		(0xF<<24)
+static inline unsigned get_apic_id(unsigned long x) 
+{
+	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
+	if (APIC_XAPIC(ver))
+		return (((x)>>24)&0xFF);
+	else
+		return (((x)>>24)&0xF);
+} 
+
+#define		GET_APIC_ID(x)	get_apic_id(x)
+#endif
+
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_APICDEF_H */
diff --git a/arch/x86/include/asm/mach-default/mach_ipi.h b/arch/x86/include/asm/mach-default/mach_ipi.h
new file mode 100644
index 0000000..fabca01
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/mach_ipi.h
@@ -0,0 +1,64 @@
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_IPI_H
+#define _ASM_X86_MACH_DEFAULT_MACH_IPI_H
+
+/* Avoid include hell */
+#define NMI_VECTOR 0x02
+
+void send_IPI_mask_bitmask(cpumask_t mask, int vector);
+void __send_IPI_shortcut(unsigned int shortcut, int vector);
+
+extern int no_broadcast;
+
+#ifdef CONFIG_X86_64
+#include <asm/genapic.h>
+#define send_IPI_mask (genapic->send_IPI_mask)
+#else
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+	send_IPI_mask_bitmask(mask, vector);
+}
+#endif
+
+static inline void __local_send_IPI_allbutself(int vector)
+{
+	if (no_broadcast || vector == NMI_VECTOR) {
+		cpumask_t mask = cpu_online_map;
+
+		cpu_clear(smp_processor_id(), mask);
+		send_IPI_mask(mask, vector);
+	} else
+		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector);
+}
+
+static inline void __local_send_IPI_all(int vector)
+{
+	if (no_broadcast || vector == NMI_VECTOR)
+		send_IPI_mask(cpu_online_map, vector);
+	else
+		__send_IPI_shortcut(APIC_DEST_ALLINC, vector);
+}
+
+#ifdef CONFIG_X86_64
+#define send_IPI_allbutself (genapic->send_IPI_allbutself)
+#define send_IPI_all (genapic->send_IPI_all)
+#else
+static inline void send_IPI_allbutself(int vector)
+{
+	/*
+	 * if there are no other CPUs in the system then we get an APIC send 
+	 * error if we try to broadcast, thus avoid sending IPIs in this case.
+	 */
+	if (!(num_online_cpus() > 1))
+		return;
+
+	__local_send_IPI_allbutself(vector);
+	return;
+}
+
+static inline void send_IPI_all(int vector)
+{
+	__local_send_IPI_all(vector);
+}
+#endif
+
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_IPI_H */
diff --git a/arch/x86/include/asm/mach-default/mach_mpparse.h b/arch/x86/include/asm/mach-default/mach_mpparse.h
new file mode 100644
index 0000000..8c1ea212
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/mach_mpparse.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_MPPARSE_H
+#define _ASM_X86_MACH_DEFAULT_MACH_MPPARSE_H
+
+static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, 
+		char *productid)
+{
+	return 0;
+}
+
+/* Hook from generic ACPI tables.c */
+static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	return 0;
+}
+
+
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_MPPARSE_H */
diff --git a/arch/x86/include/asm/mach-default/mach_mpspec.h b/arch/x86/include/asm/mach-default/mach_mpspec.h
new file mode 100644
index 0000000..e85ede6
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/mach_mpspec.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_MPSPEC_H
+#define _ASM_X86_MACH_DEFAULT_MACH_MPSPEC_H
+
+#define MAX_IRQ_SOURCES 256
+
+#if CONFIG_BASE_SMALL == 0
+#define MAX_MP_BUSSES 256
+#else
+#define MAX_MP_BUSSES 32
+#endif
+
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_MPSPEC_H */
diff --git a/arch/x86/include/asm/mach-default/mach_timer.h b/arch/x86/include/asm/mach-default/mach_timer.h
new file mode 100644
index 0000000..8537285
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/mach_timer.h
@@ -0,0 +1,48 @@
+/*
+ *  Machine specific calibrate_tsc() for generic.
+ *  Split out from timer_tsc.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+/* ------ Calibrate the TSC ------- 
+ * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
+ * Too much 64-bit arithmetic here to do this cleanly in C, and for
+ * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
+ * output busy loop as low as possible. We avoid reading the CTC registers
+ * directly because of the awkward 8-bit access mechanism of the 82C54
+ * device.
+ */
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_TIMER_H
+#define _ASM_X86_MACH_DEFAULT_MACH_TIMER_H
+
+#define CALIBRATE_TIME_MSEC 30 /* 30 msecs */
+#define CALIBRATE_LATCH	\
+	((CLOCK_TICK_RATE * CALIBRATE_TIME_MSEC + 1000/2)/1000)
+
+static inline void mach_prepare_counter(void)
+{
+       /* Set the Gate high, disable speaker */
+	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+	/*
+	 * Now let's take care of CTC channel 2
+	 *
+	 * Set the Gate high, program CTC channel 2 for mode 0,
+	 * (interrupt on terminal count mode), binary count,
+	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
+	 *
+	 * Some devices need a delay here.
+	 */
+	outb(0xb0, 0x43);			/* binary, mode 0, LSB/MSB, Ch 2 */
+	outb_p(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
+	outb_p(CALIBRATE_LATCH >> 8, 0x42);       /* MSB of count */
+}
+
+static inline void mach_countup(unsigned long *count_p)
+{
+	unsigned long count = 0;
+	do {
+		count++;
+	} while ((inb_p(0x61) & 0x20) == 0);
+	*count_p = count;
+}
+
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_TIMER_H */
diff --git a/arch/x86/include/asm/mach-default/mach_traps.h b/arch/x86/include/asm/mach-default/mach_traps.h
new file mode 100644
index 0000000..f792060
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/mach_traps.h
@@ -0,0 +1,33 @@
+/*
+ *  Machine specific NMI handling for generic.
+ *  Split out from traps.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_TRAPS_H
+#define _ASM_X86_MACH_DEFAULT_MACH_TRAPS_H
+
+#include <asm/mc146818rtc.h>
+
+static inline unsigned char get_nmi_reason(void)
+{
+	return inb(0x61);
+}
+
+static inline void reassert_nmi(void)
+{
+	int old_reg = -1;
+
+	if (do_i_have_lock_cmos())
+		old_reg = current_lock_cmos_reg();
+	else
+		lock_cmos(0); /* register doesn't matter here */
+	outb(0x8f, 0x70);
+	inb(0x71);		/* dummy */
+	outb(0x0f, 0x70);
+	inb(0x71);		/* dummy */
+	if (old_reg >= 0)
+		outb(old_reg, 0x70);
+	else
+		unlock_cmos();
+}
+
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_TRAPS_H */
diff --git a/arch/x86/include/asm/mach-default/mach_wakecpu.h b/arch/x86/include/asm/mach-default/mach_wakecpu.h
new file mode 100644
index 0000000..d5c0b82
--- /dev/null
+++ b/arch/x86/include/asm/mach-default/mach_wakecpu.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H
+#define _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H
+
+/* 
+ * This file copes with machines that wakeup secondary CPUs by the
+ * INIT, INIT, STARTUP sequence.
+ */
+
+#define WAKE_SECONDARY_VIA_INIT
+
+#define TRAMPOLINE_LOW phys_to_virt(0x467)
+#define TRAMPOLINE_HIGH phys_to_virt(0x469)
+
+#define boot_cpu_apicid boot_cpu_physical_apicid
+
+static inline void wait_for_init_deassert(atomic_t *deassert)
+{
+	while (!atomic_read(deassert))
+		cpu_relax();
+	return;
+}
+
+/* Nothing to do for most platforms, since cleared by the INIT cycle */
+static inline void smp_callin_clear_local_apic(void)
+{
+}
+
+static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+#if APIC_DEBUG
+ #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
+#else
+ #define inquire_remote_apic(apicid) {}
+#endif
+
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H */
diff --git a/include/asm-x86/mach-default/pci-functions.h b/arch/x86/include/asm/mach-default/pci-functions.h
similarity index 100%
rename from include/asm-x86/mach-default/pci-functions.h
rename to arch/x86/include/asm/mach-default/pci-functions.h
diff --git a/include/asm-x86/mach-default/setup_arch.h b/arch/x86/include/asm/mach-default/setup_arch.h
similarity index 100%
rename from include/asm-x86/mach-default/setup_arch.h
rename to arch/x86/include/asm/mach-default/setup_arch.h
diff --git a/include/asm-x86/mach-default/smpboot_hooks.h b/arch/x86/include/asm/mach-default/smpboot_hooks.h
similarity index 100%
rename from include/asm-x86/mach-default/smpboot_hooks.h
rename to arch/x86/include/asm/mach-default/smpboot_hooks.h
diff --git a/arch/x86/include/asm/mach-generic/gpio.h b/arch/x86/include/asm/mach-generic/gpio.h
new file mode 100644
index 0000000..995c45e
--- /dev/null
+++ b/arch/x86/include/asm/mach-generic/gpio.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_X86_MACH_GENERIC_GPIO_H
+#define _ASM_X86_MACH_GENERIC_GPIO_H
+
+int gpio_request(unsigned gpio, const char *label);
+void gpio_free(unsigned gpio);
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
+int gpio_to_irq(unsigned gpio);
+int irq_to_gpio(unsigned irq);
+
+#include <asm-generic/gpio.h>           /* cansleep wrappers */
+
+#endif /* _ASM_X86_MACH_GENERIC_GPIO_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
new file mode 100644
index 0000000..5180bd7
--- /dev/null
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_X86_MACH_GENERIC_MACH_APIC_H
+#define _ASM_X86_MACH_GENERIC_MACH_APIC_H
+
+#include <asm/genapic.h>
+
+#define esr_disable (genapic->ESR_DISABLE)
+#define NO_BALANCE_IRQ (genapic->no_balance_irq)
+#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
+#define INT_DEST_MODE (genapic->int_dest_mode)
+#undef APIC_DEST_LOGICAL
+#define APIC_DEST_LOGICAL (genapic->apic_destination_logical)
+#define TARGET_CPUS	  (genapic->target_cpus())
+#define apic_id_registered (genapic->apic_id_registered)
+#define init_apic_ldr (genapic->init_apic_ldr)
+#define ioapic_phys_id_map (genapic->ioapic_phys_id_map)
+#define setup_apic_routing (genapic->setup_apic_routing)
+#define multi_timer_check (genapic->multi_timer_check)
+#define apicid_to_node (genapic->apicid_to_node)
+#define cpu_to_logical_apicid (genapic->cpu_to_logical_apicid) 
+#define cpu_present_to_apicid (genapic->cpu_present_to_apicid)
+#define apicid_to_cpu_present (genapic->apicid_to_cpu_present)
+#define setup_portio_remap (genapic->setup_portio_remap)
+#define check_apicid_present (genapic->check_apicid_present)
+#define check_phys_apicid_present (genapic->check_phys_apicid_present)
+#define check_apicid_used (genapic->check_apicid_used)
+#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
+#define vector_allocation_domain (genapic->vector_allocation_domain)
+#define enable_apic_mode (genapic->enable_apic_mode)
+#define phys_pkg_id (genapic->phys_pkg_id)
+
+extern void generic_bigsmp_probe(void);
+
+#endif /* _ASM_X86_MACH_GENERIC_MACH_APIC_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_apicdef.h b/arch/x86/include/asm/mach-generic/mach_apicdef.h
new file mode 100644
index 0000000..68041f3
--- /dev/null
+++ b/arch/x86/include/asm/mach-generic/mach_apicdef.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_X86_MACH_GENERIC_MACH_APICDEF_H
+#define _ASM_X86_MACH_GENERIC_MACH_APICDEF_H
+
+#ifndef APIC_DEFINITION
+#include <asm/genapic.h>
+
+#define GET_APIC_ID (genapic->get_apic_id)
+#define APIC_ID_MASK (genapic->apic_id_mask)
+#endif
+
+#endif /* _ASM_X86_MACH_GENERIC_MACH_APICDEF_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_ipi.h b/arch/x86/include/asm/mach-generic/mach_ipi.h
new file mode 100644
index 0000000..ffd637e
--- /dev/null
+++ b/arch/x86/include/asm/mach-generic/mach_ipi.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_X86_MACH_GENERIC_MACH_IPI_H
+#define _ASM_X86_MACH_GENERIC_MACH_IPI_H
+
+#include <asm/genapic.h>
+
+#define send_IPI_mask (genapic->send_IPI_mask)
+#define send_IPI_allbutself (genapic->send_IPI_allbutself)
+#define send_IPI_all (genapic->send_IPI_all)
+
+#endif /* _ASM_X86_MACH_GENERIC_MACH_IPI_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_mpparse.h b/arch/x86/include/asm/mach-generic/mach_mpparse.h
new file mode 100644
index 0000000..048f1d4
--- /dev/null
+++ b/arch/x86/include/asm/mach-generic/mach_mpparse.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_X86_MACH_GENERIC_MACH_MPPARSE_H
+#define _ASM_X86_MACH_GENERIC_MACH_MPPARSE_H
+
+
+extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
+			 char *productid);
+
+extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
+
+#endif /* _ASM_X86_MACH_GENERIC_MACH_MPPARSE_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_mpspec.h b/arch/x86/include/asm/mach-generic/mach_mpspec.h
new file mode 100644
index 0000000..bbab5cc
--- /dev/null
+++ b/arch/x86/include/asm/mach-generic/mach_mpspec.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_X86_MACH_GENERIC_MACH_MPSPEC_H
+#define _ASM_X86_MACH_GENERIC_MACH_MPSPEC_H
+
+#define MAX_IRQ_SOURCES 256
+
+/* Summit or generic (i.e. installer) kernels need lots of bus entries. */
+/* Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets. */
+#define MAX_MP_BUSSES 260
+
+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+				char *productid);
+#endif /* _ASM_X86_MACH_GENERIC_MACH_MPSPEC_H */
diff --git a/arch/x86/include/asm/mach-rdc321x/gpio.h b/arch/x86/include/asm/mach-rdc321x/gpio.h
new file mode 100644
index 0000000..c210ab5
--- /dev/null
+++ b/arch/x86/include/asm/mach-rdc321x/gpio.h
@@ -0,0 +1,60 @@
+#ifndef _ASM_X86_MACH_RDC321X_GPIO_H
+#define _ASM_X86_MACH_RDC321X_GPIO_H
+
+#include <linux/kernel.h>
+
+extern int rdc_gpio_get_value(unsigned gpio);
+extern void rdc_gpio_set_value(unsigned gpio, int value);
+extern int rdc_gpio_direction_input(unsigned gpio);
+extern int rdc_gpio_direction_output(unsigned gpio, int value);
+extern int rdc_gpio_request(unsigned gpio, const char *label);
+extern void rdc_gpio_free(unsigned gpio);
+extern void __init rdc321x_gpio_setup(void);
+
+/* Wrappers for the arch-neutral GPIO API */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return rdc_gpio_request(gpio, label);
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	might_sleep();
+	rdc_gpio_free(gpio);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	return rdc_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	return rdc_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return rdc_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	rdc_gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq;
+}
+
+/* For cansleep */
+#include <asm-generic/gpio.h>
+
+#endif /* _ASM_X86_MACH_RDC321X_GPIO_H */
diff --git a/include/asm-x86/mach-rdc321x/rdc321x_defs.h b/arch/x86/include/asm/mach-rdc321x/rdc321x_defs.h
similarity index 100%
rename from include/asm-x86/mach-rdc321x/rdc321x_defs.h
rename to arch/x86/include/asm/mach-rdc321x/rdc321x_defs.h
diff --git a/include/asm-x86/mach-voyager/do_timer.h b/arch/x86/include/asm/mach-voyager/do_timer.h
similarity index 100%
rename from include/asm-x86/mach-voyager/do_timer.h
rename to arch/x86/include/asm/mach-voyager/do_timer.h
diff --git a/include/asm-x86/mach-voyager/entry_arch.h b/arch/x86/include/asm/mach-voyager/entry_arch.h
similarity index 100%
rename from include/asm-x86/mach-voyager/entry_arch.h
rename to arch/x86/include/asm/mach-voyager/entry_arch.h
diff --git a/include/asm-x86/mach-voyager/setup_arch.h b/arch/x86/include/asm/mach-voyager/setup_arch.h
similarity index 100%
rename from include/asm-x86/mach-voyager/setup_arch.h
rename to arch/x86/include/asm/mach-voyager/setup_arch.h
diff --git a/arch/x86/include/asm/math_emu.h b/arch/x86/include/asm/math_emu.h
new file mode 100644
index 0000000..5a65b10
--- /dev/null
+++ b/arch/x86/include/asm/math_emu.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_X86_MATH_EMU_H
+#define _ASM_X86_MATH_EMU_H
+
+/* This structure matches the layout of the data saved to the stack
+   following a device-not-present interrupt, part of it saved
+   automatically by the 80386/80486.
+   */
+struct info {
+	long ___orig_eip;
+	long ___ebx;
+	long ___ecx;
+	long ___edx;
+	long ___esi;
+	long ___edi;
+	long ___ebp;
+	long ___eax;
+	long ___ds;
+	long ___es;
+	long ___fs;
+	long ___orig_eax;
+	long ___eip;
+	long ___cs;
+	long ___eflags;
+	long ___esp;
+	long ___ss;
+	long ___vm86_es; /* This and the following only in vm86 mode */
+	long ___vm86_ds;
+	long ___vm86_fs;
+	long ___vm86_gs;
+};
+#endif /* _ASM_X86_MATH_EMU_H */
diff --git a/arch/x86/include/asm/mc146818rtc.h b/arch/x86/include/asm/mc146818rtc.h
new file mode 100644
index 0000000..01fdf56
--- /dev/null
+++ b/arch/x86/include/asm/mc146818rtc.h
@@ -0,0 +1,104 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_X86_MC146818RTC_H
+#define _ASM_X86_MC146818RTC_H
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <linux/mc146818rtc.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+#if defined(CONFIG_X86_32) && defined(__HAVE_ARCH_CMPXCHG)
+/*
+ * This lock provides nmi access to the CMOS/RTC registers.  It has some
+ * special properties.  It is owned by a CPU and stores the index register
+ * currently being accessed (if owned).  The idea here is that it works
+ * like a normal lock (normally).  However, in an NMI, the NMI code will
+ * first check to see if its CPU owns the lock, meaning that the NMI
+ * interrupted during the read/write of the device.  If it does, it goes ahead
+ * and performs the access and then restores the index register.  If it does
+ * not, it locks normally.
+ *
+ * Note that since we are working with NMIs, we need this lock even in
+ * a non-SMP machine just to mark that the lock is owned.
+ *
+ * This only works with compare-and-swap.  There is no other way to
+ * atomically claim the lock and set the owner.
+ */
+#include <linux/smp.h>
+extern volatile unsigned long cmos_lock;
+
+/*
+ * All of these below must be called with interrupts off, preempt
+ * disabled, etc.
+ */
+
+static inline void lock_cmos(unsigned char reg)
+{
+	unsigned long new;
+	new = ((smp_processor_id() + 1) << 8) | reg;
+	for (;;) {
+		if (cmos_lock) {
+			cpu_relax();
+			continue;
+		}
+		if (__cmpxchg(&cmos_lock, 0, new, sizeof(cmos_lock)) == 0)
+			return;
+	}
+}
+
+static inline void unlock_cmos(void)
+{
+	cmos_lock = 0;
+}
+
+static inline int do_i_have_lock_cmos(void)
+{
+	return (cmos_lock >> 8) == (smp_processor_id() + 1);
+}
+
+static inline unsigned char current_lock_cmos_reg(void)
+{
+	return cmos_lock & 0xff;
+}
+
+#define lock_cmos_prefix(reg)			\
+	do {					\
+		unsigned long cmos_flags;	\
+		local_irq_save(cmos_flags);	\
+		lock_cmos(reg)
+
+#define lock_cmos_suffix(reg)			\
+	unlock_cmos();				\
+	local_irq_restore(cmos_flags);		\
+	} while (0)
+#else
+#define lock_cmos_prefix(reg) do {} while (0)
+#define lock_cmos_suffix(reg) do {} while (0)
+#define lock_cmos(reg)
+#define unlock_cmos()
+#define do_i_have_lock_cmos() 0
+#define current_lock_cmos_reg() 0
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) rtc_cmos_read(addr)
+#define CMOS_WRITE(val, addr) rtc_cmos_write(val, addr)
+unsigned char rtc_cmos_read(unsigned char addr);
+void rtc_cmos_write(unsigned char val, unsigned char addr);
+
+extern int mach_set_rtc_mmss(unsigned long nowtime);
+extern unsigned long mach_get_cmos_time(void);
+
+#define RTC_IRQ 8
+
+#endif /* _ASM_X86_MC146818RTC_H */
diff --git a/arch/x86/include/asm/mca.h b/arch/x86/include/asm/mca.h
new file mode 100644
index 0000000..eedbb6c
--- /dev/null
+++ b/arch/x86/include/asm/mca.h
@@ -0,0 +1,43 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* Platform specific MCA defines */
+#ifndef _ASM_X86_MCA_H
+#define _ASM_X86_MCA_H
+
+/* Maximal number of MCA slots - actually, some machines have less, but
+ * they all have sufficient number of POS registers to cover 8.
+ */
+#define MCA_MAX_SLOT_NR  8
+
+/* Most machines have only one MCA bus.  The only multiple bus machines
+ * I know have at most two */
+#define MAX_MCA_BUSSES 2
+
+#define MCA_PRIMARY_BUS		0
+#define MCA_SECONDARY_BUS	1
+
+/* Dummy slot numbers on primary MCA for integrated functions */
+#define MCA_INTEGSCSI	(MCA_MAX_SLOT_NR)
+#define MCA_INTEGVIDEO	(MCA_MAX_SLOT_NR+1)
+#define MCA_MOTHERBOARD (MCA_MAX_SLOT_NR+2)
+
+/* Dummy POS values for integrated functions */
+#define MCA_DUMMY_POS_START	0x10000
+#define MCA_INTEGSCSI_POS	(MCA_DUMMY_POS_START+1)
+#define MCA_INTEGVIDEO_POS	(MCA_DUMMY_POS_START+2)
+#define MCA_MOTHERBOARD_POS	(MCA_DUMMY_POS_START+3)
+
+/* MCA registers */
+
+#define MCA_MOTHERBOARD_SETUP_REG	0x94
+#define MCA_ADAPTER_SETUP_REG		0x96
+#define MCA_POS_REG(n)			(0x100+(n))
+
+#define MCA_ENABLED	0x01	/* POS 2, set if adapter enabled */
+
+/* Max number of adapters, including both slots and various integrated
+ * things.
+ */
+#define MCA_NUMADAPTERS (MCA_MAX_SLOT_NR+3)
+
+#endif /* _ASM_X86_MCA_H */
diff --git a/arch/x86/include/asm/mca_dma.h b/arch/x86/include/asm/mca_dma.h
new file mode 100644
index 0000000..45271ae
--- /dev/null
+++ b/arch/x86/include/asm/mca_dma.h
@@ -0,0 +1,201 @@
+#ifndef _ASM_X86_MCA_DMA_H
+#define _ASM_X86_MCA_DMA_H
+
+#include <asm/io.h>
+#include <linux/ioport.h>
+
+/*
+ * Microchannel specific DMA stuff.  DMA on an MCA machine is fairly similar to
+ *   standard PC dma, but it certainly has its quirks.  DMA register addresses
+ *   are in a different place and there are some added functions.  Most of this
+ *   should be pretty obvious on inspection.  Note that the user must divide
+ *   count by 2 when using 16-bit dma; that is not handled by these functions.
+ *
+ * Ramen Noodles are yummy.
+ *
+ *  1998 Tymm Twillman <tymm@computer.org>
+ */
+
+/*
+ * Registers that are used by the DMA controller; FN is the function register
+ *   (tell the controller what to do) and EXE is the execution register (how
+ *   to do it)
+ */
+
+#define MCA_DMA_REG_FN  0x18
+#define MCA_DMA_REG_EXE 0x1A
+
+/*
+ * Functions that the DMA controller can do
+ */
+
+#define MCA_DMA_FN_SET_IO       0x00
+#define MCA_DMA_FN_SET_ADDR     0x20
+#define MCA_DMA_FN_GET_ADDR     0x30
+#define MCA_DMA_FN_SET_COUNT    0x40
+#define MCA_DMA_FN_GET_COUNT    0x50
+#define MCA_DMA_FN_GET_STATUS   0x60
+#define MCA_DMA_FN_SET_MODE     0x70
+#define MCA_DMA_FN_SET_ARBUS    0x80
+#define MCA_DMA_FN_MASK         0x90
+#define MCA_DMA_FN_RESET_MASK   0xA0
+#define MCA_DMA_FN_MASTER_CLEAR 0xD0
+
+/*
+ * Modes (used by setting MCA_DMA_FN_MODE in the function register)
+ *
+ * Note that the MODE_READ is read from memory (write to device), and
+ *   MODE_WRITE is vice-versa.
+ */
+
+#define MCA_DMA_MODE_XFER  0x04  /* read by default */
+#define MCA_DMA_MODE_READ  0x04  /* same as XFER */
+#define MCA_DMA_MODE_WRITE 0x08  /* OR with MODE_XFER to use */
+#define MCA_DMA_MODE_IO    0x01  /* DMA from IO register */
+#define MCA_DMA_MODE_16    0x40  /* 16 bit xfers */
+
+
+/**
+ *	mca_enable_dma	-	channel to enable DMA on
+ *	@dmanr: DMA channel
+ *
+ *	Enable the MCA bus DMA on a channel. This can be called from
+ *	IRQ context.
+ */
+
+static inline void mca_enable_dma(unsigned int dmanr)
+{
+	outb(MCA_DMA_FN_RESET_MASK | dmanr, MCA_DMA_REG_FN);
+}
+
+/**
+ *	mca_disble_dma	-	channel to disable DMA on
+ *	@dmanr: DMA channel
+ *
+ *	Enable the MCA bus DMA on a channel. This can be called from
+ *	IRQ context.
+ */
+
+static inline void mca_disable_dma(unsigned int dmanr)
+{
+	outb(MCA_DMA_FN_MASK | dmanr, MCA_DMA_REG_FN);
+}
+
+/**
+ *	mca_set_dma_addr -	load a 24bit DMA address
+ *	@dmanr: DMA channel
+ *	@a: 24bit bus address
+ *
+ *	Load the address register in the DMA controller. This has a 24bit
+ *	limitation (16Mb).
+ */
+
+static inline void mca_set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+	outb(MCA_DMA_FN_SET_ADDR | dmanr, MCA_DMA_REG_FN);
+	outb(a & 0xff, MCA_DMA_REG_EXE);
+	outb((a >> 8) & 0xff, MCA_DMA_REG_EXE);
+	outb((a >> 16) & 0xff, MCA_DMA_REG_EXE);
+}
+
+/**
+ *	mca_get_dma_addr -	load a 24bit DMA address
+ *	@dmanr: DMA channel
+ *
+ *	Read the address register in the DMA controller. This has a 24bit
+ *	limitation (16Mb). The return is a bus address.
+ */
+
+static inline unsigned int mca_get_dma_addr(unsigned int dmanr)
+{
+	unsigned int addr;
+
+	outb(MCA_DMA_FN_GET_ADDR | dmanr, MCA_DMA_REG_FN);
+	addr = inb(MCA_DMA_REG_EXE);
+	addr |= inb(MCA_DMA_REG_EXE) << 8;
+	addr |= inb(MCA_DMA_REG_EXE) << 16;
+
+	return addr;
+}
+
+/**
+ *	mca_set_dma_count -	load a 16bit transfer count
+ *	@dmanr: DMA channel
+ *	@count: count
+ *
+ *	Set the DMA count for this channel. This can be up to 64Kbytes.
+ *	Setting a count of zero will not do what you expect.
+ */
+
+static inline void mca_set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	count--;  /* transfers one more than count -- correct for this */
+
+	outb(MCA_DMA_FN_SET_COUNT | dmanr, MCA_DMA_REG_FN);
+	outb(count & 0xff, MCA_DMA_REG_EXE);
+	outb((count >> 8) & 0xff, MCA_DMA_REG_EXE);
+}
+
+/**
+ *	mca_get_dma_residue -	get the remaining bytes to transfer
+ *	@dmanr: DMA channel
+ *
+ *	This function returns the number of bytes left to transfer
+ *	on this DMA channel.
+ */
+
+static inline unsigned int mca_get_dma_residue(unsigned int dmanr)
+{
+	unsigned short count;
+
+	outb(MCA_DMA_FN_GET_COUNT | dmanr, MCA_DMA_REG_FN);
+	count = 1 + inb(MCA_DMA_REG_EXE);
+	count += inb(MCA_DMA_REG_EXE) << 8;
+
+	return count;
+}
+
+/**
+ *	mca_set_dma_io -	set the port for an I/O transfer
+ *	@dmanr: DMA channel
+ *	@io_addr: an I/O port number
+ *
+ *	Unlike the ISA bus DMA controllers the DMA on MCA bus can transfer
+ *	with an I/O port target.
+ */
+
+static inline void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr)
+{
+	/*
+	 * DMA from a port address -- set the io address
+	 */
+
+	outb(MCA_DMA_FN_SET_IO | dmanr, MCA_DMA_REG_FN);
+	outb(io_addr & 0xff, MCA_DMA_REG_EXE);
+	outb((io_addr >>  8) & 0xff, MCA_DMA_REG_EXE);
+}
+
+/**
+ *	mca_set_dma_mode -	set the DMA mode
+ *	@dmanr: DMA channel
+ *	@mode: mode to set
+ *
+ *	The DMA controller supports several modes. The mode values you can
+ *	set are-
+ *
+ *	%MCA_DMA_MODE_READ when reading from the DMA device.
+ *
+ *	%MCA_DMA_MODE_WRITE to writing to the DMA device.
+ *
+ *	%MCA_DMA_MODE_IO to do DMA to or from an I/O port.
+ *
+ *	%MCA_DMA_MODE_16 to do 16bit transfers.
+ */
+
+static inline void mca_set_dma_mode(unsigned int dmanr, unsigned int mode)
+{
+	outb(MCA_DMA_FN_SET_MODE | dmanr, MCA_DMA_REG_FN);
+	outb(mode, MCA_DMA_REG_EXE);
+}
+
+#endif /* _ASM_X86_MCA_DMA_H */
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
new file mode 100644
index 0000000..1d6e17c
--- /dev/null
+++ b/arch/x86/include/asm/mce.h
@@ -0,0 +1,130 @@
+#ifndef _ASM_X86_MCE_H
+#define _ASM_X86_MCE_H
+
+#ifdef __x86_64__
+
+#include <asm/ioctls.h>
+#include <asm/types.h>
+
+/*
+ * Machine Check support for x86
+ */
+
+#define MCG_CTL_P	 (1UL<<8)   /* MCG_CAP register available */
+
+#define MCG_STATUS_RIPV  (1UL<<0)   /* restart ip valid */
+#define MCG_STATUS_EIPV  (1UL<<1)   /* ip points to correct instruction */
+#define MCG_STATUS_MCIP  (1UL<<2)   /* machine check in progress */
+
+#define MCI_STATUS_VAL   (1UL<<63)  /* valid error */
+#define MCI_STATUS_OVER  (1UL<<62)  /* previous errors lost */
+#define MCI_STATUS_UC    (1UL<<61)  /* uncorrected error */
+#define MCI_STATUS_EN    (1UL<<60)  /* error enabled */
+#define MCI_STATUS_MISCV (1UL<<59)  /* misc error reg. valid */
+#define MCI_STATUS_ADDRV (1UL<<58)  /* addr reg. valid */
+#define MCI_STATUS_PCC   (1UL<<57)  /* processor context corrupt */
+
+/* Fields are zero when not available */
+struct mce {
+	__u64 status;
+	__u64 misc;
+	__u64 addr;
+	__u64 mcgstatus;
+	__u64 ip;
+	__u64 tsc;	/* cpu time stamp counter */
+	__u64 res1;	/* for future extension */
+	__u64 res2;	/* dito. */
+	__u8  cs;		/* code segment */
+	__u8  bank;	/* machine check bank */
+	__u8  cpu;	/* cpu that raised the error */
+	__u8  finished;   /* entry is valid */
+	__u32 pad;
+};
+
+/*
+ * This structure contains all data related to the MCE log.  Also
+ * carries a signature to make it easier to find from external
+ * debugging tools.  Each entry is only valid when its finished flag
+ * is set.
+ */
+
+#define MCE_LOG_LEN 32
+
+struct mce_log {
+	char signature[12]; /* "MACHINECHECK" */
+	unsigned len;	    /* = MCE_LOG_LEN */
+	unsigned next;
+	unsigned flags;
+	unsigned pad0;
+	struct mce entry[MCE_LOG_LEN];
+};
+
+#define MCE_OVERFLOW 0		/* bit 0 in flags means overflow */
+
+#define MCE_LOG_SIGNATURE	"MACHINECHECK"
+
+#define MCE_GET_RECORD_LEN   _IOR('M', 1, int)
+#define MCE_GET_LOG_LEN      _IOR('M', 2, int)
+#define MCE_GETCLEAR_FLAGS   _IOR('M', 3, int)
+
+/* Software defined banks */
+#define MCE_EXTENDED_BANK	128
+#define MCE_THERMAL_BANK	MCE_EXTENDED_BANK + 0
+
+#define K8_MCE_THRESHOLD_BASE      (MCE_EXTENDED_BANK + 1)      /* MCE_AMD */
+#define K8_MCE_THRESHOLD_BANK_0    (MCE_THRESHOLD_BASE + 0 * 9)
+#define K8_MCE_THRESHOLD_BANK_1    (MCE_THRESHOLD_BASE + 1 * 9)
+#define K8_MCE_THRESHOLD_BANK_2    (MCE_THRESHOLD_BASE + 2 * 9)
+#define K8_MCE_THRESHOLD_BANK_3    (MCE_THRESHOLD_BASE + 3 * 9)
+#define K8_MCE_THRESHOLD_BANK_4    (MCE_THRESHOLD_BASE + 4 * 9)
+#define K8_MCE_THRESHOLD_BANK_5    (MCE_THRESHOLD_BASE + 5 * 9)
+#define K8_MCE_THRESHOLD_DRAM_ECC  (MCE_THRESHOLD_BANK_4 + 0)
+
+#endif /* __x86_64__ */
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_X86_32
+extern int mce_disabled;
+#else /* CONFIG_X86_32 */
+
+#include <asm/atomic.h>
+
+void mce_log(struct mce *m);
+DECLARE_PER_CPU(struct sys_device, device_mce);
+extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
+
+#ifdef CONFIG_X86_MCE_INTEL
+void mce_intel_feature_init(struct cpuinfo_x86 *c);
+#else
+static inline void mce_intel_feature_init(struct cpuinfo_x86 *c) { }
+#endif
+
+#ifdef CONFIG_X86_MCE_AMD
+void mce_amd_feature_init(struct cpuinfo_x86 *c);
+#else
+static inline void mce_amd_feature_init(struct cpuinfo_x86 *c) { }
+#endif
+
+void mce_log_therm_throt_event(unsigned int cpu, __u64 status);
+
+extern atomic_t mce_entry;
+
+extern void do_machine_check(struct pt_regs *, long);
+extern int mce_notify_user(void);
+
+#endif /* !CONFIG_X86_32 */
+
+
+
+#ifdef CONFIG_X86_MCE
+extern void mcheck_init(struct cpuinfo_x86 *c);
+#else
+#define mcheck_init(c) do { } while (0)
+#endif
+extern void stop_mce(void);
+extern void restart_mce(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_MCE_H */
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
new file mode 100644
index 0000000..c882664
--- /dev/null
+++ b/arch/x86/include/asm/microcode.h
@@ -0,0 +1,47 @@
+#ifndef _ASM_X86_MICROCODE_H
+#define _ASM_X86_MICROCODE_H
+
+struct cpu_signature {
+	unsigned int sig;
+	unsigned int pf;
+	unsigned int rev;
+};
+
+struct device;
+
+struct microcode_ops {
+	int  (*request_microcode_user) (int cpu, const void __user *buf, size_t size);
+	int  (*request_microcode_fw) (int cpu, struct device *device);
+
+	void (*apply_microcode) (int cpu);
+
+	int  (*collect_cpu_info) (int cpu, struct cpu_signature *csig);
+	void (*microcode_fini_cpu) (int cpu);
+};
+
+struct ucode_cpu_info {
+	struct cpu_signature cpu_sig;
+	int valid;
+	void *mc;
+};
+extern struct ucode_cpu_info ucode_cpu_info[];
+
+#ifdef CONFIG_MICROCODE_INTEL
+extern struct microcode_ops * __init init_intel_microcode(void);
+#else
+static inline struct microcode_ops * __init init_intel_microcode(void)
+{
+	return NULL;
+}
+#endif /* CONFIG_MICROCODE_INTEL */
+
+#ifdef CONFIG_MICROCODE_AMD
+extern struct microcode_ops * __init init_amd_microcode(void);
+#else
+static inline struct microcode_ops * __init init_amd_microcode(void)
+{
+	return NULL;
+}
+#endif
+
+#endif /* _ASM_X86_MICROCODE_H */
diff --git a/arch/x86/include/asm/mman.h b/arch/x86/include/asm/mman.h
new file mode 100644
index 0000000..90bc410
--- /dev/null
+++ b/arch/x86/include/asm/mman.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_X86_MMAN_H
+#define _ASM_X86_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#define MAP_32BIT	0x40		/* only give out 32bit addresses */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#endif /* _ASM_X86_MMAN_H */
diff --git a/arch/x86/include/asm/mmconfig.h b/arch/x86/include/asm/mmconfig.h
new file mode 100644
index 0000000..9b119da
--- /dev/null
+++ b/arch/x86/include/asm/mmconfig.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_X86_MMCONFIG_H
+#define _ASM_X86_MMCONFIG_H
+
+#ifdef CONFIG_PCI_MMCONFIG
+extern void __cpuinit fam10h_check_enable_mmcfg(void);
+extern void __cpuinit check_enable_amd_mmconf_dmi(void);
+#else
+static inline void fam10h_check_enable_mmcfg(void) { }
+static inline void check_enable_amd_mmconf_dmi(void) { }
+#endif
+
+#endif /* _ASM_X86_MMCONFIG_H */
diff --git a/arch/x86/include/asm/mmu.h b/arch/x86/include/asm/mmu.h
new file mode 100644
index 0000000..80a1dee
--- /dev/null
+++ b/arch/x86/include/asm/mmu.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_X86_MMU_H
+#define _ASM_X86_MMU_H
+
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+
+/*
+ * The x86 doesn't have a mmu context, but
+ * we put the segment information here.
+ */
+typedef struct {
+	void *ldt;
+	int size;
+	struct mutex lock;
+	void *vdso;
+} mm_context_t;
+
+#ifdef CONFIG_SMP
+void leave_mm(int cpu);
+#else
+static inline void leave_mm(int cpu)
+{
+}
+#endif
+
+#endif /* _ASM_X86_MMU_H */
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
new file mode 100644
index 0000000..8aeeb3f
--- /dev/null
+++ b/arch/x86/include/asm/mmu_context.h
@@ -0,0 +1,37 @@
+#ifndef _ASM_X86_MMU_CONTEXT_H
+#define _ASM_X86_MMU_CONTEXT_H
+
+#include <asm/desc.h>
+#include <asm/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/paravirt.h>
+#ifndef CONFIG_PARAVIRT
+#include <asm-generic/mm_hooks.h>
+
+static inline void paravirt_activate_mm(struct mm_struct *prev,
+					struct mm_struct *next)
+{
+}
+#endif	/* !CONFIG_PARAVIRT */
+
+/*
+ * Used for LDT copy/destruction.
+ */
+int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+void destroy_context(struct mm_struct *mm);
+
+#ifdef CONFIG_X86_32
+# include "mmu_context_32.h"
+#else
+# include "mmu_context_64.h"
+#endif
+
+#define activate_mm(prev, next)			\
+do {						\
+	paravirt_activate_mm((prev), (next));	\
+	switch_mm((prev), (next), NULL);	\
+} while (0);
+
+
+#endif /* _ASM_X86_MMU_CONTEXT_H */
diff --git a/arch/x86/include/asm/mmu_context_32.h b/arch/x86/include/asm/mmu_context_32.h
new file mode 100644
index 0000000..8e10015
--- /dev/null
+++ b/arch/x86/include/asm/mmu_context_32.h
@@ -0,0 +1,56 @@
+#ifndef _ASM_X86_MMU_CONTEXT_32_H
+#define _ASM_X86_MMU_CONTEXT_32_H
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+#ifdef CONFIG_SMP
+	unsigned cpu = smp_processor_id();
+	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK)
+		per_cpu(cpu_tlbstate, cpu).state = TLBSTATE_LAZY;
+#endif
+}
+
+static inline void switch_mm(struct mm_struct *prev,
+			     struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	int cpu = smp_processor_id();
+
+	if (likely(prev != next)) {
+		/* stop flush ipis for the previous mm */
+		cpu_clear(cpu, prev->cpu_vm_mask);
+#ifdef CONFIG_SMP
+		per_cpu(cpu_tlbstate, cpu).state = TLBSTATE_OK;
+		per_cpu(cpu_tlbstate, cpu).active_mm = next;
+#endif
+		cpu_set(cpu, next->cpu_vm_mask);
+
+		/* Re-load page tables */
+		load_cr3(next->pgd);
+
+		/*
+		 * load the LDT, if the LDT is different:
+		 */
+		if (unlikely(prev->context.ldt != next->context.ldt))
+			load_LDT_nolock(&next->context);
+	}
+#ifdef CONFIG_SMP
+	else {
+		per_cpu(cpu_tlbstate, cpu).state = TLBSTATE_OK;
+		BUG_ON(per_cpu(cpu_tlbstate, cpu).active_mm != next);
+
+		if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
+			/* We were in lazy tlb mode and leave_mm disabled
+			 * tlb flush IPI delivery. We must reload %cr3.
+			 */
+			load_cr3(next->pgd);
+			load_LDT_nolock(&next->context);
+		}
+	}
+#endif
+}
+
+#define deactivate_mm(tsk, mm)			\
+	asm("movl %0,%%gs": :"r" (0));
+
+#endif /* _ASM_X86_MMU_CONTEXT_32_H */
diff --git a/arch/x86/include/asm/mmu_context_64.h b/arch/x86/include/asm/mmu_context_64.h
new file mode 100644
index 0000000..677d36e
--- /dev/null
+++ b/arch/x86/include/asm/mmu_context_64.h
@@ -0,0 +1,54 @@
+#ifndef _ASM_X86_MMU_CONTEXT_64_H
+#define _ASM_X86_MMU_CONTEXT_64_H
+
+#include <asm/pda.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+#ifdef CONFIG_SMP
+	if (read_pda(mmu_state) == TLBSTATE_OK)
+		write_pda(mmu_state, TLBSTATE_LAZY);
+#endif
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	unsigned cpu = smp_processor_id();
+	if (likely(prev != next)) {
+		/* stop flush ipis for the previous mm */
+		cpu_clear(cpu, prev->cpu_vm_mask);
+#ifdef CONFIG_SMP
+		write_pda(mmu_state, TLBSTATE_OK);
+		write_pda(active_mm, next);
+#endif
+		cpu_set(cpu, next->cpu_vm_mask);
+		load_cr3(next->pgd);
+
+		if (unlikely(next->context.ldt != prev->context.ldt))
+			load_LDT_nolock(&next->context);
+	}
+#ifdef CONFIG_SMP
+	else {
+		write_pda(mmu_state, TLBSTATE_OK);
+		if (read_pda(active_mm) != next)
+			BUG();
+		if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
+			/* We were in lazy tlb mode and leave_mm disabled
+			 * tlb flush IPI delivery. We must reload CR3
+			 * to make sure to use no freed page tables.
+			 */
+			load_cr3(next->pgd);
+			load_LDT_nolock(&next->context);
+		}
+	}
+#endif
+}
+
+#define deactivate_mm(tsk, mm)			\
+do {						\
+	load_gs_index(0);			\
+	asm volatile("movl %0,%%fs"::"r"(0));	\
+} while (0)
+
+#endif /* _ASM_X86_MMU_CONTEXT_64_H */
diff --git a/arch/x86/include/asm/mmx.h b/arch/x86/include/asm/mmx.h
new file mode 100644
index 0000000..5cbf313
--- /dev/null
+++ b/arch/x86/include/asm/mmx.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_X86_MMX_H
+#define _ASM_X86_MMX_H
+
+/*
+ *	MMX 3Dnow! helper operations
+ */
+
+#include <linux/types.h>
+
+extern void *_mmx_memcpy(void *to, const void *from, size_t size);
+extern void mmx_clear_page(void *page);
+extern void mmx_copy_page(void *to, void *from);
+
+#endif /* _ASM_X86_MMX_H */
diff --git a/include/asm-x86/mmzone.h b/arch/x86/include/asm/mmzone.h
similarity index 100%
rename from include/asm-x86/mmzone.h
rename to arch/x86/include/asm/mmzone.h
diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h
new file mode 100644
index 0000000..485bdf0
--- /dev/null
+++ b/arch/x86/include/asm/mmzone_32.h
@@ -0,0 +1,134 @@
+/*
+ * Written by Pat Gaughen (gone@us.ibm.com) Mar 2002
+ *
+ */
+
+#ifndef _ASM_X86_MMZONE_32_H
+#define _ASM_X86_MMZONE_32_H
+
+#include <asm/smp.h>
+
+#ifdef CONFIG_NUMA
+extern struct pglist_data *node_data[];
+#define NODE_DATA(nid)	(node_data[nid])
+
+#include <asm/numaq.h>
+/* summit or generic arch */
+#include <asm/srat.h>
+
+extern int get_memcfg_numa_flat(void);
+/*
+ * This allows any one NUMA architecture to be compiled
+ * for, and still fall back to the flat function if it
+ * fails.
+ */
+static inline void get_memcfg_numa(void)
+{
+
+	if (get_memcfg_numaq())
+		return;
+	if (get_memcfg_from_srat())
+		return;
+	get_memcfg_numa_flat();
+}
+
+extern int early_pfn_to_nid(unsigned long pfn);
+
+#else /* !CONFIG_NUMA */
+
+#define get_memcfg_numa get_memcfg_numa_flat
+
+#endif /* CONFIG_NUMA */
+
+#ifdef CONFIG_DISCONTIGMEM
+
+/*
+ * generic node memory support, the following assumptions apply:
+ *
+ * 1) memory comes in 64Mb contigious chunks which are either present or not
+ * 2) we will not have more than 64Gb in total
+ *
+ * for now assume that 64Gb is max amount of RAM for whole system
+ *    64Gb / 4096bytes/page = 16777216 pages
+ */
+#define MAX_NR_PAGES 16777216
+#define MAX_ELEMENTS 1024
+#define PAGES_PER_ELEMENT (MAX_NR_PAGES/MAX_ELEMENTS)
+
+extern s8 physnode_map[];
+
+static inline int pfn_to_nid(unsigned long pfn)
+{
+#ifdef CONFIG_NUMA
+	return((int) physnode_map[(pfn) / PAGES_PER_ELEMENT]);
+#else
+	return 0;
+#endif
+}
+
+/*
+ * Following are macros that each numa implmentation must define.
+ */
+
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)						\
+({									\
+	pg_data_t *__pgdat = NODE_DATA(nid);				\
+	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
+})
+
+static inline int pfn_valid(int pfn)
+{
+	int nid = pfn_to_nid(pfn);
+
+	if (nid >= 0)
+		return (pfn < node_end_pfn(nid));
+	return 0;
+}
+
+#endif /* CONFIG_DISCONTIGMEM */
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+
+/*
+ * Following are macros that are specific to this numa platform.
+ */
+#define reserve_bootmem(addr, size, flags) \
+	reserve_bootmem_node(NODE_DATA(0), (addr), (size), (flags))
+#define alloc_bootmem(x) \
+	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_nopanic(x) \
+	__alloc_bootmem_node_nopanic(NODE_DATA(0), (x), SMP_CACHE_BYTES, \
+				__pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_low(x) \
+	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, 0)
+#define alloc_bootmem_pages(x) \
+	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_pages_nopanic(x) \
+	__alloc_bootmem_node_nopanic(NODE_DATA(0), (x), PAGE_SIZE, \
+				__pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_low_pages(x) \
+	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0)
+#define alloc_bootmem_node(pgdat, x)					\
+({									\
+	struct pglist_data  __maybe_unused			\
+				*__alloc_bootmem_node__pgdat = (pgdat);	\
+	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES,	\
+						__pa(MAX_DMA_ADDRESS));	\
+})
+#define alloc_bootmem_pages_node(pgdat, x)				\
+({									\
+	struct pglist_data  __maybe_unused			\
+				*__alloc_bootmem_node__pgdat = (pgdat);	\
+	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE,		\
+						__pa(MAX_DMA_ADDRESS));	\
+})
+#define alloc_bootmem_low_pages_node(pgdat, x)				\
+({									\
+	struct pglist_data  __maybe_unused			\
+				*__alloc_bootmem_node__pgdat = (pgdat);	\
+	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0);		\
+})
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
+
+#endif /* _ASM_X86_MMZONE_32_H */
diff --git a/arch/x86/include/asm/mmzone_64.h b/arch/x86/include/asm/mmzone_64.h
new file mode 100644
index 0000000..a5b3817
--- /dev/null
+++ b/arch/x86/include/asm/mmzone_64.h
@@ -0,0 +1,51 @@
+/* K8 NUMA support */
+/* Copyright 2002,2003 by Andi Kleen, SuSE Labs */
+/* 2.5 Version loosely based on the NUMAQ Code by Pat Gaughen. */
+#ifndef _ASM_X86_MMZONE_64_H
+#define _ASM_X86_MMZONE_64_H
+
+
+#ifdef CONFIG_NUMA
+
+#include <linux/mmdebug.h>
+
+#include <asm/smp.h>
+
+/* Simple perfect hash to map physical addresses to node numbers */
+struct memnode {
+	int shift;
+	unsigned int mapsize;
+	s16 *map;
+	s16 embedded_map[64 - 8];
+} ____cacheline_aligned; /* total size = 128 bytes */
+extern struct memnode memnode;
+#define memnode_shift memnode.shift
+#define memnodemap memnode.map
+#define memnodemapsize memnode.mapsize
+
+extern struct pglist_data *node_data[];
+
+static inline __attribute__((pure)) int phys_to_nid(unsigned long addr)
+{
+	unsigned nid;
+	VIRTUAL_BUG_ON(!memnodemap);
+	nid = memnodemap[addr >> memnode_shift];
+	VIRTUAL_BUG_ON(nid >= MAX_NUMNODES || !node_data[nid]);
+	return nid;
+}
+
+#define NODE_DATA(nid)		(node_data[nid])
+
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)       (NODE_DATA(nid)->node_start_pfn +	\
+				 NODE_DATA(nid)->node_spanned_pages)
+
+extern int early_pfn_to_nid(unsigned long pfn);
+
+#ifdef CONFIG_NUMA_EMU
+#define FAKE_NODE_MIN_SIZE	(64 * 1024 * 1024)
+#define FAKE_NODE_MIN_HASH_MASK	(~(FAKE_NODE_MIN_SIZE - 1UL))
+#endif
+
+#endif
+#endif /* _ASM_X86_MMZONE_64_H */
diff --git a/arch/x86/include/asm/module.h b/arch/x86/include/asm/module.h
new file mode 100644
index 0000000..47d6274
--- /dev/null
+++ b/arch/x86/include/asm/module.h
@@ -0,0 +1,80 @@
+#ifndef _ASM_X86_MODULE_H
+#define _ASM_X86_MODULE_H
+
+/* x86_32/64 are simple */
+struct mod_arch_specific {};
+
+#ifdef CONFIG_X86_32
+# define Elf_Shdr Elf32_Shdr
+# define Elf_Sym Elf32_Sym
+# define Elf_Ehdr Elf32_Ehdr
+#else
+# define Elf_Shdr Elf64_Shdr
+# define Elf_Sym Elf64_Sym
+# define Elf_Ehdr Elf64_Ehdr
+#endif
+
+#ifdef CONFIG_X86_64
+/* X86_64 does not define MODULE_PROC_FAMILY */
+#elif defined CONFIG_M386
+#define MODULE_PROC_FAMILY "386 "
+#elif defined CONFIG_M486
+#define MODULE_PROC_FAMILY "486 "
+#elif defined CONFIG_M586
+#define MODULE_PROC_FAMILY "586 "
+#elif defined CONFIG_M586TSC
+#define MODULE_PROC_FAMILY "586TSC "
+#elif defined CONFIG_M586MMX
+#define MODULE_PROC_FAMILY "586MMX "
+#elif defined CONFIG_MCORE2
+#define MODULE_PROC_FAMILY "CORE2 "
+#elif defined CONFIG_M686
+#define MODULE_PROC_FAMILY "686 "
+#elif defined CONFIG_MPENTIUMII
+#define MODULE_PROC_FAMILY "PENTIUMII "
+#elif defined CONFIG_MPENTIUMIII
+#define MODULE_PROC_FAMILY "PENTIUMIII "
+#elif defined CONFIG_MPENTIUMM
+#define MODULE_PROC_FAMILY "PENTIUMM "
+#elif defined CONFIG_MPENTIUM4
+#define MODULE_PROC_FAMILY "PENTIUM4 "
+#elif defined CONFIG_MK6
+#define MODULE_PROC_FAMILY "K6 "
+#elif defined CONFIG_MK7
+#define MODULE_PROC_FAMILY "K7 "
+#elif defined CONFIG_MK8
+#define MODULE_PROC_FAMILY "K8 "
+#elif defined CONFIG_X86_ELAN
+#define MODULE_PROC_FAMILY "ELAN "
+#elif defined CONFIG_MCRUSOE
+#define MODULE_PROC_FAMILY "CRUSOE "
+#elif defined CONFIG_MEFFICEON
+#define MODULE_PROC_FAMILY "EFFICEON "
+#elif defined CONFIG_MWINCHIPC6
+#define MODULE_PROC_FAMILY "WINCHIPC6 "
+#elif defined CONFIG_MWINCHIP3D
+#define MODULE_PROC_FAMILY "WINCHIP3D "
+#elif defined CONFIG_MCYRIXIII
+#define MODULE_PROC_FAMILY "CYRIXIII "
+#elif defined CONFIG_MVIAC3_2
+#define MODULE_PROC_FAMILY "VIAC3-2 "
+#elif defined CONFIG_MVIAC7
+#define MODULE_PROC_FAMILY "VIAC7 "
+#elif defined CONFIG_MGEODEGX1
+#define MODULE_PROC_FAMILY "GEODEGX1 "
+#elif defined CONFIG_MGEODE_LX
+#define MODULE_PROC_FAMILY "GEODE "
+#else
+#error unknown processor family
+#endif
+
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_4KSTACKS
+#  define MODULE_STACKSIZE "4KSTACKS "
+# else
+#  define MODULE_STACKSIZE ""
+# endif
+# define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY MODULE_STACKSIZE
+#endif
+
+#endif /* _ASM_X86_MODULE_H */
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
new file mode 100644
index 0000000..91885c2
--- /dev/null
+++ b/arch/x86/include/asm/mpspec.h
@@ -0,0 +1,145 @@
+#ifndef _ASM_X86_MPSPEC_H
+#define _ASM_X86_MPSPEC_H
+
+#include <linux/init.h>
+
+#include <asm/mpspec_def.h>
+
+extern int apic_version[MAX_APICS];
+
+#ifdef CONFIG_X86_32
+#include <mach_mpspec.h>
+
+extern unsigned int def_to_bigsmp;
+extern u8 apicid_2_node[];
+extern int pic_mode;
+
+#ifdef CONFIG_X86_NUMAQ
+extern int mp_bus_id_to_node[MAX_MP_BUSSES];
+extern int mp_bus_id_to_local[MAX_MP_BUSSES];
+extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+#endif
+
+#define MAX_APICID 256
+
+#else
+
+#define MAX_MP_BUSSES 256
+/* Each PCI slot may be a combo card with its own bus.  4 IRQ pins per slot. */
+#define MAX_IRQ_SOURCES (MAX_MP_BUSSES * 4)
+
+#endif
+
+extern void early_find_smp_config(void);
+extern void early_get_smp_config(void);
+
+#if defined(CONFIG_MCA) || defined(CONFIG_EISA)
+extern int mp_bus_id_to_type[MAX_MP_BUSSES];
+#endif
+
+extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
+
+extern unsigned int boot_cpu_physical_apicid;
+extern unsigned int max_physical_apicid;
+extern int smp_found_config;
+extern int mpc_default_type;
+extern unsigned long mp_lapic_addr;
+
+extern void find_smp_config(void);
+extern void get_smp_config(void);
+#ifdef CONFIG_X86_MPPARSE
+extern void early_reserve_e820_mpc_new(void);
+#else
+static inline void early_reserve_e820_mpc_new(void) { }
+#endif
+
+void __cpuinit generic_processor_info(int apicid, int version);
+#ifdef CONFIG_ACPI
+extern void mp_register_ioapic(int id, u32 address, u32 gsi_base);
+extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
+				   u32 gsi);
+extern void mp_config_acpi_legacy_irqs(void);
+extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low);
+#ifdef CONFIG_X86_IO_APIC
+extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
+				u32 gsi, int triggering, int polarity);
+#else
+static inline int
+mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
+		   u32 gsi, int triggering, int polarity)
+{
+	return 0;
+}
+#endif
+#endif /* CONFIG_ACPI */
+
+#define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_APICS)
+
+struct physid_mask {
+	unsigned long mask[PHYSID_ARRAY_SIZE];
+};
+
+typedef struct physid_mask physid_mask_t;
+
+#define physid_set(physid, map)			set_bit(physid, (map).mask)
+#define physid_clear(physid, map)		clear_bit(physid, (map).mask)
+#define physid_isset(physid, map)		test_bit(physid, (map).mask)
+#define physid_test_and_set(physid, map)			\
+	test_and_set_bit(physid, (map).mask)
+
+#define physids_and(dst, src1, src2)					\
+	bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+
+#define physids_or(dst, src1, src2)					\
+	bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+
+#define physids_clear(map)					\
+	bitmap_zero((map).mask, MAX_APICS)
+
+#define physids_complement(dst, src)				\
+	bitmap_complement((dst).mask, (src).mask, MAX_APICS)
+
+#define physids_empty(map)					\
+	bitmap_empty((map).mask, MAX_APICS)
+
+#define physids_equal(map1, map2)				\
+	bitmap_equal((map1).mask, (map2).mask, MAX_APICS)
+
+#define physids_weight(map)					\
+	bitmap_weight((map).mask, MAX_APICS)
+
+#define physids_shift_right(d, s, n)				\
+	bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS)
+
+#define physids_shift_left(d, s, n)				\
+	bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS)
+
+#define physids_coerce(map)			((map).mask[0])
+
+#define physids_promote(physids)					\
+	({								\
+		physid_mask_t __physid_mask = PHYSID_MASK_NONE;		\
+		__physid_mask.mask[0] = physids;			\
+		__physid_mask;						\
+	})
+
+/* Note: will create very large stack frames if physid_mask_t is big */
+#define physid_mask_of_physid(physid)					\
+	({								\
+		physid_mask_t __physid_mask = PHYSID_MASK_NONE;		\
+		physid_set(physid, __physid_mask);			\
+		__physid_mask;						\
+	})
+
+static inline void physid_set_mask_of_physid(int physid, physid_mask_t *map)
+{
+	physids_clear(*map);
+	physid_set(physid, *map);
+}
+
+#define PHYSID_MASK_ALL		{ {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} }
+#define PHYSID_MASK_NONE	{ {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} }
+
+extern physid_mask_t phys_cpu_present_map;
+
+#endif /* _ASM_X86_MPSPEC_H */
diff --git a/arch/x86/include/asm/mpspec_def.h b/arch/x86/include/asm/mpspec_def.h
new file mode 100644
index 0000000..e3ace7d
--- /dev/null
+++ b/arch/x86/include/asm/mpspec_def.h
@@ -0,0 +1,180 @@
+#ifndef _ASM_X86_MPSPEC_DEF_H
+#define _ASM_X86_MPSPEC_DEF_H
+
+/*
+ * Structure definitions for SMP machines following the
+ * Intel Multiprocessing Specification 1.1 and 1.4.
+ */
+
+/*
+ * This tag identifies where the SMP configuration
+ * information is.
+ */
+
+#define SMP_MAGIC_IDENT	(('_'<<24) | ('P'<<16) | ('M'<<8) | '_')
+
+#ifdef CONFIG_X86_32
+# define MAX_MPC_ENTRY 1024
+# define MAX_APICS      256
+#else
+# if NR_CPUS <= 255
+#  define MAX_APICS     255
+# else
+#  define MAX_APICS   32768
+# endif
+#endif
+
+struct intel_mp_floating {
+	char mpf_signature[4];		/* "_MP_"			*/
+	unsigned int mpf_physptr;	/* Configuration table address	*/
+	unsigned char mpf_length;	/* Our length (paragraphs)	*/
+	unsigned char mpf_specification;/* Specification version	*/
+	unsigned char mpf_checksum;	/* Checksum (makes sum 0)	*/
+	unsigned char mpf_feature1;	/* Standard or configuration ?	*/
+	unsigned char mpf_feature2;	/* Bit7 set for IMCR|PIC	*/
+	unsigned char mpf_feature3;	/* Unused (0)			*/
+	unsigned char mpf_feature4;	/* Unused (0)			*/
+	unsigned char mpf_feature5;	/* Unused (0)			*/
+};
+
+#define MPC_SIGNATURE "PCMP"
+
+struct mp_config_table {
+	char mpc_signature[4];
+	unsigned short mpc_length;	/* Size of table */
+	char mpc_spec;			/* 0x01 */
+	char mpc_checksum;
+	char mpc_oem[8];
+	char mpc_productid[12];
+	unsigned int mpc_oemptr;	/* 0 if not present */
+	unsigned short mpc_oemsize;	/* 0 if not present */
+	unsigned short mpc_oemcount;
+	unsigned int mpc_lapic;	/* APIC address */
+	unsigned int reserved;
+};
+
+/* Followed by entries */
+
+#define	MP_PROCESSOR		0
+#define	MP_BUS			1
+#define	MP_IOAPIC		2
+#define	MP_INTSRC		3
+#define	MP_LINTSRC		4
+/* Used by IBM NUMA-Q to describe node locality */
+#define	MP_TRANSLATION		192
+
+#define CPU_ENABLED		1	/* Processor is available */
+#define CPU_BOOTPROCESSOR	2	/* Processor is the BP */
+
+#define CPU_STEPPING_MASK	0x000F
+#define CPU_MODEL_MASK		0x00F0
+#define CPU_FAMILY_MASK		0x0F00
+
+struct mpc_config_processor {
+	unsigned char mpc_type;
+	unsigned char mpc_apicid;	/* Local APIC number */
+	unsigned char mpc_apicver;	/* Its versions */
+	unsigned char mpc_cpuflag;
+	unsigned int mpc_cpufeature;
+	unsigned int mpc_featureflag;	/* CPUID feature value */
+	unsigned int mpc_reserved[2];
+};
+
+struct mpc_config_bus {
+	unsigned char mpc_type;
+	unsigned char mpc_busid;
+	unsigned char mpc_bustype[6];
+};
+
+/* List of Bus Type string values, Intel MP Spec. */
+#define BUSTYPE_EISA	"EISA"
+#define BUSTYPE_ISA	"ISA"
+#define BUSTYPE_INTERN	"INTERN"	/* Internal BUS */
+#define BUSTYPE_MCA	"MCA"
+#define BUSTYPE_VL	"VL"		/* Local bus */
+#define BUSTYPE_PCI	"PCI"
+#define BUSTYPE_PCMCIA	"PCMCIA"
+#define BUSTYPE_CBUS	"CBUS"
+#define BUSTYPE_CBUSII	"CBUSII"
+#define BUSTYPE_FUTURE	"FUTURE"
+#define BUSTYPE_MBI	"MBI"
+#define BUSTYPE_MBII	"MBII"
+#define BUSTYPE_MPI	"MPI"
+#define BUSTYPE_MPSA	"MPSA"
+#define BUSTYPE_NUBUS	"NUBUS"
+#define BUSTYPE_TC	"TC"
+#define BUSTYPE_VME	"VME"
+#define BUSTYPE_XPRESS	"XPRESS"
+
+#define MPC_APIC_USABLE		0x01
+
+struct mpc_config_ioapic {
+	unsigned char mpc_type;
+	unsigned char mpc_apicid;
+	unsigned char mpc_apicver;
+	unsigned char mpc_flags;
+	unsigned int mpc_apicaddr;
+};
+
+struct mpc_config_intsrc {
+	unsigned char mpc_type;
+	unsigned char mpc_irqtype;
+	unsigned short mpc_irqflag;
+	unsigned char mpc_srcbus;
+	unsigned char mpc_srcbusirq;
+	unsigned char mpc_dstapic;
+	unsigned char mpc_dstirq;
+};
+
+enum mp_irq_source_types {
+	mp_INT = 0,
+	mp_NMI = 1,
+	mp_SMI = 2,
+	mp_ExtINT = 3
+};
+
+#define MP_IRQDIR_DEFAULT	0
+#define MP_IRQDIR_HIGH		1
+#define MP_IRQDIR_LOW		3
+
+#define MP_APIC_ALL	0xFF
+
+struct mpc_config_lintsrc {
+	unsigned char mpc_type;
+	unsigned char mpc_irqtype;
+	unsigned short mpc_irqflag;
+	unsigned char mpc_srcbusid;
+	unsigned char mpc_srcbusirq;
+	unsigned char mpc_destapic;
+	unsigned char mpc_destapiclint;
+};
+
+#define MPC_OEM_SIGNATURE "_OEM"
+
+struct mp_config_oemtable {
+	char oem_signature[4];
+	unsigned short oem_length;	/* Size of table */
+	char  oem_rev;			/* 0x01 */
+	char  oem_checksum;
+	char  mpc_oem[8];
+};
+
+/*
+ *	Default configurations
+ *
+ *	1	2 CPU ISA 82489DX
+ *	2	2 CPU EISA 82489DX neither IRQ 0 timer nor IRQ 13 DMA chaining
+ *	3	2 CPU EISA 82489DX
+ *	4	2 CPU MCA 82489DX
+ *	5	2 CPU ISA+PCI
+ *	6	2 CPU EISA+PCI
+ *	7	2 CPU MCA+PCI
+ */
+
+enum mp_bustype {
+	MP_BUS_ISA = 1,
+	MP_BUS_EISA,
+	MP_BUS_PCI,
+	MP_BUS_MCA,
+};
+#endif /* _ASM_X86_MPSPEC_DEF_H */
diff --git a/arch/x86/include/asm/msgbuf.h b/arch/x86/include/asm/msgbuf.h
new file mode 100644
index 0000000..7e4e948
--- /dev/null
+++ b/arch/x86/include/asm/msgbuf.h
@@ -0,0 +1,39 @@
+#ifndef _ASM_X86_MSGBUF_H
+#define _ASM_X86_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space on i386 is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ *
+ * Pad space on x8664 is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+#ifdef __i386__
+	unsigned long	__unused1;
+#endif
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+#ifdef __i386__
+	unsigned long	__unused2;
+#endif
+	__kernel_time_t msg_ctime;	/* last change time */
+#ifdef __i386__
+	unsigned long	__unused3;
+#endif
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _ASM_X86_MSGBUF_H */
diff --git a/arch/x86/include/asm/msidef.h b/arch/x86/include/asm/msidef.h
new file mode 100644
index 0000000..6706b30
--- /dev/null
+++ b/arch/x86/include/asm/msidef.h
@@ -0,0 +1,55 @@
+#ifndef _ASM_X86_MSIDEF_H
+#define _ASM_X86_MSIDEF_H
+
+/*
+ * Constants for Intel APIC based MSI messages.
+ */
+
+/*
+ * Shifts for MSI data
+ */
+
+#define MSI_DATA_VECTOR_SHIFT		0
+#define  MSI_DATA_VECTOR_MASK		0x000000ff
+#define	 MSI_DATA_VECTOR(v)		(((v) << MSI_DATA_VECTOR_SHIFT) & \
+					 MSI_DATA_VECTOR_MASK)
+
+#define MSI_DATA_DELIVERY_MODE_SHIFT	8
+#define  MSI_DATA_DELIVERY_FIXED	(0 << MSI_DATA_DELIVERY_MODE_SHIFT)
+#define  MSI_DATA_DELIVERY_LOWPRI	(1 << MSI_DATA_DELIVERY_MODE_SHIFT)
+
+#define MSI_DATA_LEVEL_SHIFT		14
+#define	 MSI_DATA_LEVEL_DEASSERT	(0 << MSI_DATA_LEVEL_SHIFT)
+#define	 MSI_DATA_LEVEL_ASSERT		(1 << MSI_DATA_LEVEL_SHIFT)
+
+#define MSI_DATA_TRIGGER_SHIFT		15
+#define  MSI_DATA_TRIGGER_EDGE		(0 << MSI_DATA_TRIGGER_SHIFT)
+#define  MSI_DATA_TRIGGER_LEVEL		(1 << MSI_DATA_TRIGGER_SHIFT)
+
+/*
+ * Shift/mask fields for msi address
+ */
+
+#define MSI_ADDR_BASE_HI		0
+#define MSI_ADDR_BASE_LO		0xfee00000
+
+#define MSI_ADDR_DEST_MODE_SHIFT	2
+#define  MSI_ADDR_DEST_MODE_PHYSICAL	(0 << MSI_ADDR_DEST_MODE_SHIFT)
+#define	 MSI_ADDR_DEST_MODE_LOGICAL	(1 << MSI_ADDR_DEST_MODE_SHIFT)
+
+#define MSI_ADDR_REDIRECTION_SHIFT	3
+#define  MSI_ADDR_REDIRECTION_CPU	(0 << MSI_ADDR_REDIRECTION_SHIFT)
+					/* dedicated cpu */
+#define  MSI_ADDR_REDIRECTION_LOWPRI	(1 << MSI_ADDR_REDIRECTION_SHIFT)
+					/* lowest priority */
+
+#define MSI_ADDR_DEST_ID_SHIFT		12
+#define	 MSI_ADDR_DEST_ID_MASK		0x00ffff0
+#define  MSI_ADDR_DEST_ID(dest)		(((dest) << MSI_ADDR_DEST_ID_SHIFT) & \
+					 MSI_ADDR_DEST_ID_MASK)
+
+#define MSI_ADDR_IR_EXT_INT		(1 << 4)
+#define MSI_ADDR_IR_SHV			(1 << 3)
+#define MSI_ADDR_IR_INDEX1(index)	((index & 0x8000) >> 13)
+#define MSI_ADDR_IR_INDEX2(index)	((index & 0x7fff) << 5)
+#endif /* _ASM_X86_MSIDEF_H */
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
new file mode 100644
index 0000000..e38859d
--- /dev/null
+++ b/arch/x86/include/asm/msr-index.h
@@ -0,0 +1,332 @@
+#ifndef _ASM_X86_MSR_INDEX_H
+#define _ASM_X86_MSR_INDEX_H
+
+/* CPU model specific register (MSR) numbers */
+
+/* x86-64 specific MSRs */
+#define MSR_EFER		0xc0000080 /* extended feature register */
+#define MSR_STAR		0xc0000081 /* legacy mode SYSCALL target */
+#define MSR_LSTAR		0xc0000082 /* long mode SYSCALL target */
+#define MSR_CSTAR		0xc0000083 /* compat mode SYSCALL target */
+#define MSR_SYSCALL_MASK	0xc0000084 /* EFLAGS mask for syscall */
+#define MSR_FS_BASE		0xc0000100 /* 64bit FS base */
+#define MSR_GS_BASE		0xc0000101 /* 64bit GS base */
+#define MSR_KERNEL_GS_BASE	0xc0000102 /* SwapGS GS shadow */
+
+/* EFER bits: */
+#define _EFER_SCE		0  /* SYSCALL/SYSRET */
+#define _EFER_LME		8  /* Long mode enable */
+#define _EFER_LMA		10 /* Long mode active (read-only) */
+#define _EFER_NX		11 /* No execute enable */
+
+#define EFER_SCE		(1<<_EFER_SCE)
+#define EFER_LME		(1<<_EFER_LME)
+#define EFER_LMA		(1<<_EFER_LMA)
+#define EFER_NX			(1<<_EFER_NX)
+
+/* Intel MSRs. Some also available on other CPUs */
+#define MSR_IA32_PERFCTR0		0x000000c1
+#define MSR_IA32_PERFCTR1		0x000000c2
+#define MSR_FSB_FREQ			0x000000cd
+
+#define MSR_MTRRcap			0x000000fe
+#define MSR_IA32_BBL_CR_CTL		0x00000119
+
+#define MSR_IA32_SYSENTER_CS		0x00000174
+#define MSR_IA32_SYSENTER_ESP		0x00000175
+#define MSR_IA32_SYSENTER_EIP		0x00000176
+
+#define MSR_IA32_MCG_CAP		0x00000179
+#define MSR_IA32_MCG_STATUS		0x0000017a
+#define MSR_IA32_MCG_CTL		0x0000017b
+
+#define MSR_IA32_PEBS_ENABLE		0x000003f1
+#define MSR_IA32_DS_AREA		0x00000600
+#define MSR_IA32_PERF_CAPABILITIES	0x00000345
+
+#define MSR_MTRRfix64K_00000		0x00000250
+#define MSR_MTRRfix16K_80000		0x00000258
+#define MSR_MTRRfix16K_A0000		0x00000259
+#define MSR_MTRRfix4K_C0000		0x00000268
+#define MSR_MTRRfix4K_C8000		0x00000269
+#define MSR_MTRRfix4K_D0000		0x0000026a
+#define MSR_MTRRfix4K_D8000		0x0000026b
+#define MSR_MTRRfix4K_E0000		0x0000026c
+#define MSR_MTRRfix4K_E8000		0x0000026d
+#define MSR_MTRRfix4K_F0000		0x0000026e
+#define MSR_MTRRfix4K_F8000		0x0000026f
+#define MSR_MTRRdefType			0x000002ff
+
+#define MSR_IA32_CR_PAT			0x00000277
+
+#define MSR_IA32_DEBUGCTLMSR		0x000001d9
+#define MSR_IA32_LASTBRANCHFROMIP	0x000001db
+#define MSR_IA32_LASTBRANCHTOIP		0x000001dc
+#define MSR_IA32_LASTINTFROMIP		0x000001dd
+#define MSR_IA32_LASTINTTOIP		0x000001de
+
+/* DEBUGCTLMSR bits (others vary by model): */
+#define _DEBUGCTLMSR_LBR	0 /* last branch recording */
+#define _DEBUGCTLMSR_BTF	1 /* single-step on branches */
+
+#define DEBUGCTLMSR_LBR		(1UL << _DEBUGCTLMSR_LBR)
+#define DEBUGCTLMSR_BTF		(1UL << _DEBUGCTLMSR_BTF)
+
+#define MSR_IA32_MC0_CTL		0x00000400
+#define MSR_IA32_MC0_STATUS		0x00000401
+#define MSR_IA32_MC0_ADDR		0x00000402
+#define MSR_IA32_MC0_MISC		0x00000403
+
+#define MSR_P6_PERFCTR0			0x000000c1
+#define MSR_P6_PERFCTR1			0x000000c2
+#define MSR_P6_EVNTSEL0			0x00000186
+#define MSR_P6_EVNTSEL1			0x00000187
+
+/* AMD64 MSRs. Not complete. See the architecture manual for a more
+   complete list. */
+
+#define MSR_AMD64_NB_CFG		0xc001001f
+#define MSR_AMD64_IBSFETCHCTL		0xc0011030
+#define MSR_AMD64_IBSFETCHLINAD		0xc0011031
+#define MSR_AMD64_IBSFETCHPHYSAD	0xc0011032
+#define MSR_AMD64_IBSOPCTL		0xc0011033
+#define MSR_AMD64_IBSOPRIP		0xc0011034
+#define MSR_AMD64_IBSOPDATA		0xc0011035
+#define MSR_AMD64_IBSOPDATA2		0xc0011036
+#define MSR_AMD64_IBSOPDATA3		0xc0011037
+#define MSR_AMD64_IBSDCLINAD		0xc0011038
+#define MSR_AMD64_IBSDCPHYSAD		0xc0011039
+#define MSR_AMD64_IBSCTL		0xc001103a
+
+/* Fam 10h MSRs */
+#define MSR_FAM10H_MMIO_CONF_BASE	0xc0010058
+#define FAM10H_MMIO_CONF_ENABLE		(1<<0)
+#define FAM10H_MMIO_CONF_BUSRANGE_MASK	0xf
+#define FAM10H_MMIO_CONF_BUSRANGE_SHIFT 2
+#define FAM10H_MMIO_CONF_BASE_MASK	0xfffffff
+#define FAM10H_MMIO_CONF_BASE_SHIFT	20
+
+/* K8 MSRs */
+#define MSR_K8_TOP_MEM1			0xc001001a
+#define MSR_K8_TOP_MEM2			0xc001001d
+#define MSR_K8_SYSCFG			0xc0010010
+#define MSR_K8_HWCR			0xc0010015
+#define MSR_K8_INT_PENDING_MSG		0xc0010055
+/* C1E active bits in int pending message */
+#define K8_INTP_C1E_ACTIVE_MASK		0x18000000
+#define MSR_K8_TSEG_ADDR		0xc0010112
+#define K8_MTRRFIXRANGE_DRAM_ENABLE	0x00040000 /* MtrrFixDramEn bit    */
+#define K8_MTRRFIXRANGE_DRAM_MODIFY	0x00080000 /* MtrrFixDramModEn bit */
+#define K8_MTRR_RDMEM_WRMEM_MASK	0x18181818 /* Mask: RdMem|WrMem    */
+
+/* K7 MSRs */
+#define MSR_K7_EVNTSEL0			0xc0010000
+#define MSR_K7_PERFCTR0			0xc0010004
+#define MSR_K7_EVNTSEL1			0xc0010001
+#define MSR_K7_PERFCTR1			0xc0010005
+#define MSR_K7_EVNTSEL2			0xc0010002
+#define MSR_K7_PERFCTR2			0xc0010006
+#define MSR_K7_EVNTSEL3			0xc0010003
+#define MSR_K7_PERFCTR3			0xc0010007
+#define MSR_K7_CLK_CTL			0xc001001b
+#define MSR_K7_HWCR			0xc0010015
+#define MSR_K7_FID_VID_CTL		0xc0010041
+#define MSR_K7_FID_VID_STATUS		0xc0010042
+
+/* K6 MSRs */
+#define MSR_K6_EFER			0xc0000080
+#define MSR_K6_STAR			0xc0000081
+#define MSR_K6_WHCR			0xc0000082
+#define MSR_K6_UWCCR			0xc0000085
+#define MSR_K6_EPMR			0xc0000086
+#define MSR_K6_PSOR			0xc0000087
+#define MSR_K6_PFIR			0xc0000088
+
+/* Centaur-Hauls/IDT defined MSRs. */
+#define MSR_IDT_FCR1			0x00000107
+#define MSR_IDT_FCR2			0x00000108
+#define MSR_IDT_FCR3			0x00000109
+#define MSR_IDT_FCR4			0x0000010a
+
+#define MSR_IDT_MCR0			0x00000110
+#define MSR_IDT_MCR1			0x00000111
+#define MSR_IDT_MCR2			0x00000112
+#define MSR_IDT_MCR3			0x00000113
+#define MSR_IDT_MCR4			0x00000114
+#define MSR_IDT_MCR5			0x00000115
+#define MSR_IDT_MCR6			0x00000116
+#define MSR_IDT_MCR7			0x00000117
+#define MSR_IDT_MCR_CTRL		0x00000120
+
+/* VIA Cyrix defined MSRs*/
+#define MSR_VIA_FCR			0x00001107
+#define MSR_VIA_LONGHAUL		0x0000110a
+#define MSR_VIA_RNG			0x0000110b
+#define MSR_VIA_BCR2			0x00001147
+
+/* Transmeta defined MSRs */
+#define MSR_TMTA_LONGRUN_CTRL		0x80868010
+#define MSR_TMTA_LONGRUN_FLAGS		0x80868011
+#define MSR_TMTA_LRTI_READOUT		0x80868018
+#define MSR_TMTA_LRTI_VOLT_MHZ		0x8086801a
+
+/* Intel defined MSRs. */
+#define MSR_IA32_P5_MC_ADDR		0x00000000
+#define MSR_IA32_P5_MC_TYPE		0x00000001
+#define MSR_IA32_TSC			0x00000010
+#define MSR_IA32_PLATFORM_ID		0x00000017
+#define MSR_IA32_EBL_CR_POWERON		0x0000002a
+#define MSR_IA32_FEATURE_CONTROL        0x0000003a
+
+#define FEATURE_CONTROL_LOCKED		(1<<0)
+#define FEATURE_CONTROL_VMXON_ENABLED	(1<<2)
+
+#define MSR_IA32_APICBASE		0x0000001b
+#define MSR_IA32_APICBASE_BSP		(1<<8)
+#define MSR_IA32_APICBASE_ENABLE	(1<<11)
+#define MSR_IA32_APICBASE_BASE		(0xfffff<<12)
+
+#define MSR_IA32_UCODE_WRITE		0x00000079
+#define MSR_IA32_UCODE_REV		0x0000008b
+
+#define MSR_IA32_PERF_STATUS		0x00000198
+#define MSR_IA32_PERF_CTL		0x00000199
+
+#define MSR_IA32_MPERF			0x000000e7
+#define MSR_IA32_APERF			0x000000e8
+
+#define MSR_IA32_THERM_CONTROL		0x0000019a
+#define MSR_IA32_THERM_INTERRUPT	0x0000019b
+#define MSR_IA32_THERM_STATUS		0x0000019c
+#define MSR_IA32_MISC_ENABLE		0x000001a0
+
+/* Intel Model 6 */
+#define MSR_P6_EVNTSEL0			0x00000186
+#define MSR_P6_EVNTSEL1			0x00000187
+
+/* P4/Xeon+ specific */
+#define MSR_IA32_MCG_EAX		0x00000180
+#define MSR_IA32_MCG_EBX		0x00000181
+#define MSR_IA32_MCG_ECX		0x00000182
+#define MSR_IA32_MCG_EDX		0x00000183
+#define MSR_IA32_MCG_ESI		0x00000184
+#define MSR_IA32_MCG_EDI		0x00000185
+#define MSR_IA32_MCG_EBP		0x00000186
+#define MSR_IA32_MCG_ESP		0x00000187
+#define MSR_IA32_MCG_EFLAGS		0x00000188
+#define MSR_IA32_MCG_EIP		0x00000189
+#define MSR_IA32_MCG_RESERVED		0x0000018a
+
+/* Pentium IV performance counter MSRs */
+#define MSR_P4_BPU_PERFCTR0		0x00000300
+#define MSR_P4_BPU_PERFCTR1		0x00000301
+#define MSR_P4_BPU_PERFCTR2		0x00000302
+#define MSR_P4_BPU_PERFCTR3		0x00000303
+#define MSR_P4_MS_PERFCTR0		0x00000304
+#define MSR_P4_MS_PERFCTR1		0x00000305
+#define MSR_P4_MS_PERFCTR2		0x00000306
+#define MSR_P4_MS_PERFCTR3		0x00000307
+#define MSR_P4_FLAME_PERFCTR0		0x00000308
+#define MSR_P4_FLAME_PERFCTR1		0x00000309
+#define MSR_P4_FLAME_PERFCTR2		0x0000030a
+#define MSR_P4_FLAME_PERFCTR3		0x0000030b
+#define MSR_P4_IQ_PERFCTR0		0x0000030c
+#define MSR_P4_IQ_PERFCTR1		0x0000030d
+#define MSR_P4_IQ_PERFCTR2		0x0000030e
+#define MSR_P4_IQ_PERFCTR3		0x0000030f
+#define MSR_P4_IQ_PERFCTR4		0x00000310
+#define MSR_P4_IQ_PERFCTR5		0x00000311
+#define MSR_P4_BPU_CCCR0		0x00000360
+#define MSR_P4_BPU_CCCR1		0x00000361
+#define MSR_P4_BPU_CCCR2		0x00000362
+#define MSR_P4_BPU_CCCR3		0x00000363
+#define MSR_P4_MS_CCCR0			0x00000364
+#define MSR_P4_MS_CCCR1			0x00000365
+#define MSR_P4_MS_CCCR2			0x00000366
+#define MSR_P4_MS_CCCR3			0x00000367
+#define MSR_P4_FLAME_CCCR0		0x00000368
+#define MSR_P4_FLAME_CCCR1		0x00000369
+#define MSR_P4_FLAME_CCCR2		0x0000036a
+#define MSR_P4_FLAME_CCCR3		0x0000036b
+#define MSR_P4_IQ_CCCR0			0x0000036c
+#define MSR_P4_IQ_CCCR1			0x0000036d
+#define MSR_P4_IQ_CCCR2			0x0000036e
+#define MSR_P4_IQ_CCCR3			0x0000036f
+#define MSR_P4_IQ_CCCR4			0x00000370
+#define MSR_P4_IQ_CCCR5			0x00000371
+#define MSR_P4_ALF_ESCR0		0x000003ca
+#define MSR_P4_ALF_ESCR1		0x000003cb
+#define MSR_P4_BPU_ESCR0		0x000003b2
+#define MSR_P4_BPU_ESCR1		0x000003b3
+#define MSR_P4_BSU_ESCR0		0x000003a0
+#define MSR_P4_BSU_ESCR1		0x000003a1
+#define MSR_P4_CRU_ESCR0		0x000003b8
+#define MSR_P4_CRU_ESCR1		0x000003b9
+#define MSR_P4_CRU_ESCR2		0x000003cc
+#define MSR_P4_CRU_ESCR3		0x000003cd
+#define MSR_P4_CRU_ESCR4		0x000003e0
+#define MSR_P4_CRU_ESCR5		0x000003e1
+#define MSR_P4_DAC_ESCR0		0x000003a8
+#define MSR_P4_DAC_ESCR1		0x000003a9
+#define MSR_P4_FIRM_ESCR0		0x000003a4
+#define MSR_P4_FIRM_ESCR1		0x000003a5
+#define MSR_P4_FLAME_ESCR0		0x000003a6
+#define MSR_P4_FLAME_ESCR1		0x000003a7
+#define MSR_P4_FSB_ESCR0		0x000003a2
+#define MSR_P4_FSB_ESCR1		0x000003a3
+#define MSR_P4_IQ_ESCR0			0x000003ba
+#define MSR_P4_IQ_ESCR1			0x000003bb
+#define MSR_P4_IS_ESCR0			0x000003b4
+#define MSR_P4_IS_ESCR1			0x000003b5
+#define MSR_P4_ITLB_ESCR0		0x000003b6
+#define MSR_P4_ITLB_ESCR1		0x000003b7
+#define MSR_P4_IX_ESCR0			0x000003c8
+#define MSR_P4_IX_ESCR1			0x000003c9
+#define MSR_P4_MOB_ESCR0		0x000003aa
+#define MSR_P4_MOB_ESCR1		0x000003ab
+#define MSR_P4_MS_ESCR0			0x000003c0
+#define MSR_P4_MS_ESCR1			0x000003c1
+#define MSR_P4_PMH_ESCR0		0x000003ac
+#define MSR_P4_PMH_ESCR1		0x000003ad
+#define MSR_P4_RAT_ESCR0		0x000003bc
+#define MSR_P4_RAT_ESCR1		0x000003bd
+#define MSR_P4_SAAT_ESCR0		0x000003ae
+#define MSR_P4_SAAT_ESCR1		0x000003af
+#define MSR_P4_SSU_ESCR0		0x000003be
+#define MSR_P4_SSU_ESCR1		0x000003bf /* guess: not in manual */
+
+#define MSR_P4_TBPU_ESCR0		0x000003c2
+#define MSR_P4_TBPU_ESCR1		0x000003c3
+#define MSR_P4_TC_ESCR0			0x000003c4
+#define MSR_P4_TC_ESCR1			0x000003c5
+#define MSR_P4_U2L_ESCR0		0x000003b0
+#define MSR_P4_U2L_ESCR1		0x000003b1
+
+/* Intel Core-based CPU performance counters */
+#define MSR_CORE_PERF_FIXED_CTR0	0x00000309
+#define MSR_CORE_PERF_FIXED_CTR1	0x0000030a
+#define MSR_CORE_PERF_FIXED_CTR2	0x0000030b
+#define MSR_CORE_PERF_FIXED_CTR_CTRL	0x0000038d
+#define MSR_CORE_PERF_GLOBAL_STATUS	0x0000038e
+#define MSR_CORE_PERF_GLOBAL_CTRL	0x0000038f
+#define MSR_CORE_PERF_GLOBAL_OVF_CTRL	0x00000390
+
+/* Geode defined MSRs */
+#define MSR_GEODE_BUSCONT_CONF0		0x00001900
+
+/* Intel VT MSRs */
+#define MSR_IA32_VMX_BASIC              0x00000480
+#define MSR_IA32_VMX_PINBASED_CTLS      0x00000481
+#define MSR_IA32_VMX_PROCBASED_CTLS     0x00000482
+#define MSR_IA32_VMX_EXIT_CTLS          0x00000483
+#define MSR_IA32_VMX_ENTRY_CTLS         0x00000484
+#define MSR_IA32_VMX_MISC               0x00000485
+#define MSR_IA32_VMX_CR0_FIXED0         0x00000486
+#define MSR_IA32_VMX_CR0_FIXED1         0x00000487
+#define MSR_IA32_VMX_CR4_FIXED0         0x00000488
+#define MSR_IA32_VMX_CR4_FIXED1         0x00000489
+#define MSR_IA32_VMX_VMCS_ENUM          0x0000048a
+#define MSR_IA32_VMX_PROCBASED_CTLS2    0x0000048b
+#define MSR_IA32_VMX_EPT_VPID_CAP       0x0000048c
+
+#endif /* _ASM_X86_MSR_INDEX_H */
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
new file mode 100644
index 0000000..46be2fa
--- /dev/null
+++ b/arch/x86/include/asm/msr.h
@@ -0,0 +1,247 @@
+#ifndef _ASM_X86_MSR_H
+#define _ASM_X86_MSR_H
+
+#include <asm/msr-index.h>
+
+#ifndef __ASSEMBLY__
+# include <linux/types.h>
+#endif
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <asm/asm.h>
+#include <asm/errno.h>
+
+static inline unsigned long long native_read_tscp(unsigned int *aux)
+{
+	unsigned long low, high;
+	asm volatile(".byte 0x0f,0x01,0xf9"
+		     : "=a" (low), "=d" (high), "=c" (*aux));
+	return low | ((u64)high << 32);
+}
+
+/*
+ * i386 calling convention returns 64-bit value in edx:eax, while
+ * x86_64 returns at rax. Also, the "A" constraint does not really
+ * mean rdx:rax in x86_64, so we need specialized behaviour for each
+ * architecture
+ */
+#ifdef CONFIG_X86_64
+#define DECLARE_ARGS(val, low, high)	unsigned low, high
+#define EAX_EDX_VAL(val, low, high)	((low) | ((u64)(high) << 32))
+#define EAX_EDX_ARGS(val, low, high)	"a" (low), "d" (high)
+#define EAX_EDX_RET(val, low, high)	"=a" (low), "=d" (high)
+#else
+#define DECLARE_ARGS(val, low, high)	unsigned long long val
+#define EAX_EDX_VAL(val, low, high)	(val)
+#define EAX_EDX_ARGS(val, low, high)	"A" (val)
+#define EAX_EDX_RET(val, low, high)	"=A" (val)
+#endif
+
+static inline unsigned long long native_read_msr(unsigned int msr)
+{
+	DECLARE_ARGS(val, low, high);
+
+	asm volatile("rdmsr" : EAX_EDX_RET(val, low, high) : "c" (msr));
+	return EAX_EDX_VAL(val, low, high);
+}
+
+static inline unsigned long long native_read_msr_safe(unsigned int msr,
+						      int *err)
+{
+	DECLARE_ARGS(val, low, high);
+
+	asm volatile("2: rdmsr ; xor %[err],%[err]\n"
+		     "1:\n\t"
+		     ".section .fixup,\"ax\"\n\t"
+		     "3:  mov %[fault],%[err] ; jmp 1b\n\t"
+		     ".previous\n\t"
+		     _ASM_EXTABLE(2b, 3b)
+		     : [err] "=r" (*err), EAX_EDX_RET(val, low, high)
+		     : "c" (msr), [fault] "i" (-EFAULT));
+	return EAX_EDX_VAL(val, low, high);
+}
+
+static inline unsigned long long native_read_msr_amd_safe(unsigned int msr,
+						      int *err)
+{
+	DECLARE_ARGS(val, low, high);
+
+	asm volatile("2: rdmsr ; xor %0,%0\n"
+		     "1:\n\t"
+		     ".section .fixup,\"ax\"\n\t"
+		     "3:  mov %3,%0 ; jmp 1b\n\t"
+		     ".previous\n\t"
+		     _ASM_EXTABLE(2b, 3b)
+		     : "=r" (*err), EAX_EDX_RET(val, low, high)
+		     : "c" (msr), "D" (0x9c5a203a), "i" (-EFAULT));
+	return EAX_EDX_VAL(val, low, high);
+}
+
+static inline void native_write_msr(unsigned int msr,
+				    unsigned low, unsigned high)
+{
+	asm volatile("wrmsr" : : "c" (msr), "a"(low), "d" (high) : "memory");
+}
+
+static inline int native_write_msr_safe(unsigned int msr,
+					unsigned low, unsigned high)
+{
+	int err;
+	asm volatile("2: wrmsr ; xor %[err],%[err]\n"
+		     "1:\n\t"
+		     ".section .fixup,\"ax\"\n\t"
+		     "3:  mov %[fault],%[err] ; jmp 1b\n\t"
+		     ".previous\n\t"
+		     _ASM_EXTABLE(2b, 3b)
+		     : [err] "=a" (err)
+		     : "c" (msr), "0" (low), "d" (high),
+		       [fault] "i" (-EFAULT)
+		     : "memory");
+	return err;
+}
+
+extern unsigned long long native_read_tsc(void);
+
+static __always_inline unsigned long long __native_read_tsc(void)
+{
+	DECLARE_ARGS(val, low, high);
+
+	rdtsc_barrier();
+	asm volatile("rdtsc" : EAX_EDX_RET(val, low, high));
+	rdtsc_barrier();
+
+	return EAX_EDX_VAL(val, low, high);
+}
+
+static inline unsigned long long native_read_pmc(int counter)
+{
+	DECLARE_ARGS(val, low, high);
+
+	asm volatile("rdpmc" : EAX_EDX_RET(val, low, high) : "c" (counter));
+	return EAX_EDX_VAL(val, low, high);
+}
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#include <linux/errno.h>
+/*
+ * Access to machine-specific registers (available on 586 and better only)
+ * Note: the rd* operations modify the parameters directly (without using
+ * pointer indirection), this allows gcc to optimize better
+ */
+
+#define rdmsr(msr, val1, val2)					\
+do {								\
+	u64 __val = native_read_msr((msr));			\
+	(val1) = (u32)__val;					\
+	(val2) = (u32)(__val >> 32);				\
+} while (0)
+
+static inline void wrmsr(unsigned msr, unsigned low, unsigned high)
+{
+	native_write_msr(msr, low, high);
+}
+
+#define rdmsrl(msr, val)			\
+	((val) = native_read_msr((msr)))
+
+#define wrmsrl(msr, val)						\
+	native_write_msr((msr), (u32)((u64)(val)), (u32)((u64)(val) >> 32))
+
+/* wrmsr with exception handling */
+static inline int wrmsr_safe(unsigned msr, unsigned low, unsigned high)
+{
+	return native_write_msr_safe(msr, low, high);
+}
+
+/* rdmsr with exception handling */
+#define rdmsr_safe(msr, p1, p2)					\
+({								\
+	int __err;						\
+	u64 __val = native_read_msr_safe((msr), &__err);	\
+	(*p1) = (u32)__val;					\
+	(*p2) = (u32)(__val >> 32);				\
+	__err;							\
+})
+
+static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
+{
+	int err;
+
+	*p = native_read_msr_safe(msr, &err);
+	return err;
+}
+static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
+{
+	int err;
+
+	*p = native_read_msr_amd_safe(msr, &err);
+	return err;
+}
+
+#define rdtscl(low)						\
+	((low) = (u32)native_read_tsc())
+
+#define rdtscll(val)						\
+	((val) = native_read_tsc())
+
+#define rdpmc(counter, low, high)			\
+do {							\
+	u64 _l = native_read_pmc((counter));		\
+	(low)  = (u32)_l;				\
+	(high) = (u32)(_l >> 32);			\
+} while (0)
+
+#define rdtscp(low, high, aux)					\
+do {                                                            \
+	unsigned long long _val = native_read_tscp(&(aux));     \
+	(low) = (u32)_val;                                      \
+	(high) = (u32)(_val >> 32);                             \
+} while (0)
+
+#define rdtscpll(val, aux) (val) = native_read_tscp(&(aux))
+
+#endif	/* !CONFIG_PARAVIRT */
+
+
+#define checking_wrmsrl(msr, val) wrmsr_safe((msr), (u32)(val),		\
+					     (u32)((val) >> 32))
+
+#define write_tsc(val1, val2) wrmsr(0x10, (val1), (val2))
+
+#define write_rdtscp_aux(val) wrmsr(0xc0000103, (val), 0)
+
+#ifdef CONFIG_SMP
+int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
+int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
+int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+#else  /*  CONFIG_SMP  */
+static inline int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+{
+	rdmsr(msr_no, *l, *h);
+	return 0;
+}
+static inline int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+{
+	wrmsr(msr_no, l, h);
+	return 0;
+}
+static inline int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no,
+				    u32 *l, u32 *h)
+{
+	return rdmsr_safe(msr_no, l, h);
+}
+static inline int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+{
+	return wrmsr_safe(msr_no, l, h);
+}
+#endif  /* CONFIG_SMP */
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+
+#endif /* _ASM_X86_MSR_H */
diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h
new file mode 100644
index 0000000..7c1e425
--- /dev/null
+++ b/arch/x86/include/asm/mtrr.h
@@ -0,0 +1,173 @@
+/*  Generic MTRR (Memory Type Range Register) ioctls.
+
+    Copyright (C) 1997-1999  Richard Gooch
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Library General Public
+    License as published by the Free Software Foundation; either
+    version 2 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Library General Public License for more details.
+
+    You should have received a copy of the GNU Library General Public
+    License along with this library; if not, write to the Free
+    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+    Richard Gooch may be reached by email at  rgooch@atnf.csiro.au
+    The postal address is:
+      Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia.
+*/
+#ifndef _ASM_X86_MTRR_H
+#define _ASM_X86_MTRR_H
+
+#include <linux/ioctl.h>
+#include <linux/errno.h>
+
+#define	MTRR_IOCTL_BASE	'M'
+
+struct mtrr_sentry {
+    unsigned long base;    /*  Base address     */
+    unsigned int size;    /*  Size of region   */
+    unsigned int type;     /*  Type of region   */
+};
+
+/* Warning: this structure has a different order from i386
+   on x86-64. The 32bit emulation code takes care of that.
+   But you need to use this for 64bit, otherwise your X server
+   will break. */
+
+#ifdef __i386__
+struct mtrr_gentry {
+    unsigned int regnum;   /*  Register number  */
+    unsigned long base;    /*  Base address     */
+    unsigned int size;    /*  Size of region   */
+    unsigned int type;     /*  Type of region   */
+};
+
+#else /* __i386__ */
+
+struct mtrr_gentry {
+    unsigned long base;    /*  Base address     */
+    unsigned int size;    /*  Size of region   */
+    unsigned int regnum;   /*  Register number  */
+    unsigned int type;     /*  Type of region   */
+};
+#endif /* !__i386__ */
+
+/*  These are the various ioctls  */
+#define MTRRIOC_ADD_ENTRY        _IOW(MTRR_IOCTL_BASE,  0, struct mtrr_sentry)
+#define MTRRIOC_SET_ENTRY        _IOW(MTRR_IOCTL_BASE,  1, struct mtrr_sentry)
+#define MTRRIOC_DEL_ENTRY        _IOW(MTRR_IOCTL_BASE,  2, struct mtrr_sentry)
+#define MTRRIOC_GET_ENTRY        _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry)
+#define MTRRIOC_KILL_ENTRY       _IOW(MTRR_IOCTL_BASE,  4, struct mtrr_sentry)
+#define MTRRIOC_ADD_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  5, struct mtrr_sentry)
+#define MTRRIOC_SET_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  6, struct mtrr_sentry)
+#define MTRRIOC_DEL_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  7, struct mtrr_sentry)
+#define MTRRIOC_GET_PAGE_ENTRY   _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry)
+#define MTRRIOC_KILL_PAGE_ENTRY  _IOW(MTRR_IOCTL_BASE,  9, struct mtrr_sentry)
+
+/*  These are the region types  */
+#define MTRR_TYPE_UNCACHABLE 0
+#define MTRR_TYPE_WRCOMB     1
+/*#define MTRR_TYPE_         2*/
+/*#define MTRR_TYPE_         3*/
+#define MTRR_TYPE_WRTHROUGH  4
+#define MTRR_TYPE_WRPROT     5
+#define MTRR_TYPE_WRBACK     6
+#define MTRR_NUM_TYPES       7
+
+#ifdef __KERNEL__
+
+/*  The following functions are for use by other drivers  */
+# ifdef CONFIG_MTRR
+extern u8 mtrr_type_lookup(u64 addr, u64 end);
+extern void mtrr_save_fixed_ranges(void *);
+extern void mtrr_save_state(void);
+extern int mtrr_add(unsigned long base, unsigned long size,
+		    unsigned int type, bool increment);
+extern int mtrr_add_page(unsigned long base, unsigned long size,
+			 unsigned int type, bool increment);
+extern int mtrr_del(int reg, unsigned long base, unsigned long size);
+extern int mtrr_del_page(int reg, unsigned long base, unsigned long size);
+extern void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi);
+extern void mtrr_ap_init(void);
+extern void mtrr_bp_init(void);
+extern int mtrr_trim_uncached_memory(unsigned long end_pfn);
+extern int amd_special_default_mtrr(void);
+#  else
+static inline u8 mtrr_type_lookup(u64 addr, u64 end)
+{
+	/*
+	 * Return no-MTRRs:
+	 */
+	return 0xff;
+}
+#define mtrr_save_fixed_ranges(arg) do {} while (0)
+#define mtrr_save_state() do {} while (0)
+static inline int mtrr_add(unsigned long base, unsigned long size,
+			   unsigned int type, bool increment)
+{
+    return -ENODEV;
+}
+static inline int mtrr_add_page(unsigned long base, unsigned long size,
+				unsigned int type, bool increment)
+{
+    return -ENODEV;
+}
+static inline int mtrr_del(int reg, unsigned long base, unsigned long size)
+{
+    return -ENODEV;
+}
+static inline int mtrr_del_page(int reg, unsigned long base, unsigned long size)
+{
+    return -ENODEV;
+}
+static inline int mtrr_trim_uncached_memory(unsigned long end_pfn)
+{
+	return 0;
+}
+static inline void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
+{
+}
+
+#define mtrr_ap_init() do {} while (0)
+#define mtrr_bp_init() do {} while (0)
+#  endif
+
+#ifdef CONFIG_COMPAT
+#include <linux/compat.h>
+
+struct mtrr_sentry32 {
+    compat_ulong_t base;    /*  Base address     */
+    compat_uint_t size;    /*  Size of region   */
+    compat_uint_t type;     /*  Type of region   */
+};
+
+struct mtrr_gentry32 {
+    compat_ulong_t regnum;   /*  Register number  */
+    compat_uint_t base;    /*  Base address     */
+    compat_uint_t size;    /*  Size of region   */
+    compat_uint_t type;     /*  Type of region   */
+};
+
+#define MTRR_IOCTL_BASE 'M'
+
+#define MTRRIOC32_ADD_ENTRY      _IOW(MTRR_IOCTL_BASE,  0, struct mtrr_sentry32)
+#define MTRRIOC32_SET_ENTRY      _IOW(MTRR_IOCTL_BASE,  1, struct mtrr_sentry32)
+#define MTRRIOC32_DEL_ENTRY      _IOW(MTRR_IOCTL_BASE,  2, struct mtrr_sentry32)
+#define MTRRIOC32_GET_ENTRY      _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry32)
+#define MTRRIOC32_KILL_ENTRY     _IOW(MTRR_IOCTL_BASE,  4, struct mtrr_sentry32)
+#define MTRRIOC32_ADD_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE,  5, struct mtrr_sentry32)
+#define MTRRIOC32_SET_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE,  6, struct mtrr_sentry32)
+#define MTRRIOC32_DEL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE,  7, struct mtrr_sentry32)
+#define MTRRIOC32_GET_PAGE_ENTRY _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry32)
+#define MTRRIOC32_KILL_PAGE_ENTRY		\
+				 _IOW(MTRR_IOCTL_BASE,  9, struct mtrr_sentry32)
+#endif /* CONFIG_COMPAT */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_MTRR_H */
diff --git a/include/asm-x86/mutex.h b/arch/x86/include/asm/mutex.h
similarity index 100%
rename from include/asm-x86/mutex.h
rename to arch/x86/include/asm/mutex.h
diff --git a/arch/x86/include/asm/mutex_32.h b/arch/x86/include/asm/mutex_32.h
new file mode 100644
index 0000000..03f90c8
--- /dev/null
+++ b/arch/x86/include/asm/mutex_32.h
@@ -0,0 +1,125 @@
+/*
+ * Assembly implementation of the mutex fastpath, based on atomic
+ * decrement/increment.
+ *
+ * started by Ingo Molnar:
+ *
+ *  Copyright (C) 2004, 2005, 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
+ */
+#ifndef _ASM_X86_MUTEX_32_H
+#define _ASM_X86_MUTEX_32_H
+
+#include <asm/alternative.h>
+
+/**
+ *  __mutex_fastpath_lock - try to take the lock by moving the count
+ *                          from 1 to a 0 value
+ *  @count: pointer of type atomic_t
+ *  @fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call <fn> if it
+ * wasn't 1 originally. This function MUST leave the value lower than 1
+ * even when the "1" assertion wasn't true.
+ */
+#define __mutex_fastpath_lock(count, fail_fn)			\
+do {								\
+	unsigned int dummy;					\
+								\
+	typecheck(atomic_t *, count);				\
+	typecheck_fn(void (*)(atomic_t *), fail_fn);		\
+								\
+	asm volatile(LOCK_PREFIX "   decl (%%eax)\n"		\
+		     "   jns 1f	\n"				\
+		     "   call " #fail_fn "\n"			\
+		     "1:\n"					\
+		     : "=a" (dummy)				\
+		     : "a" (count)				\
+		     : "memory", "ecx", "edx");			\
+} while (0)
+
+
+/**
+ *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
+ *                                 from 1 to a 0 value
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call <fail_fn> if it
+ * wasn't 1 originally. This function returns 0 if the fastpath succeeds,
+ * or anything the slow path function returns
+ */
+static inline int __mutex_fastpath_lock_retval(atomic_t *count,
+					       int (*fail_fn)(atomic_t *))
+{
+	if (unlikely(atomic_dec_return(count) < 0))
+		return fail_fn(count);
+	else
+		return 0;
+}
+
+/**
+ *  __mutex_fastpath_unlock - try to promote the mutex from 0 to 1
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 0
+ *
+ * try to promote the mutex from 0 to 1. if it wasn't 0, call <fail_fn>.
+ * In the failure case, this function is allowed to either set the value
+ * to 1, or to set it to a value lower than 1.
+ *
+ * If the implementation sets it to a value of lower than 1, the
+ * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
+ * to return 0 otherwise.
+ */
+#define __mutex_fastpath_unlock(count, fail_fn)			\
+do {								\
+	unsigned int dummy;					\
+								\
+	typecheck(atomic_t *, count);				\
+	typecheck_fn(void (*)(atomic_t *), fail_fn);		\
+								\
+	asm volatile(LOCK_PREFIX "   incl (%%eax)\n"		\
+		     "   jg	1f\n"				\
+		     "   call " #fail_fn "\n"			\
+		     "1:\n"					\
+		     : "=a" (dummy)				\
+		     : "a" (count)				\
+		     : "memory", "ecx", "edx");			\
+} while (0)
+
+#define __mutex_slowpath_needs_to_unlock()	1
+
+/**
+ * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
+ *
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: fallback function
+ *
+ * Change the count from 1 to a value lower than 1, and return 0 (failure)
+ * if it wasn't 1 originally, or return 1 (success) otherwise. This function
+ * MUST leave the value lower than 1 even when the "1" assertion wasn't true.
+ * Additionally, if the value was < 0 originally, this function must not leave
+ * it to 0 on failure.
+ */
+static inline int __mutex_fastpath_trylock(atomic_t *count,
+					   int (*fail_fn)(atomic_t *))
+{
+	/*
+	 * We have two variants here. The cmpxchg based one is the best one
+	 * because it never induce a false contention state.  It is included
+	 * here because architectures using the inc/dec algorithms over the
+	 * xchg ones are much more likely to support cmpxchg natively.
+	 *
+	 * If not we fall back to the spinlock based variant - that is
+	 * just as efficient (and simpler) as a 'destructive' probing of
+	 * the mutex state would be.
+	 */
+#ifdef __HAVE_ARCH_CMPXCHG
+	if (likely(atomic_cmpxchg(count, 1, 0) == 1))
+		return 1;
+	return 0;
+#else
+	return fail_fn(count);
+#endif
+}
+
+#endif /* _ASM_X86_MUTEX_32_H */
diff --git a/arch/x86/include/asm/mutex_64.h b/arch/x86/include/asm/mutex_64.h
new file mode 100644
index 0000000..68a87b0
--- /dev/null
+++ b/arch/x86/include/asm/mutex_64.h
@@ -0,0 +1,100 @@
+/*
+ * Assembly implementation of the mutex fastpath, based on atomic
+ * decrement/increment.
+ *
+ * started by Ingo Molnar:
+ *
+ *  Copyright (C) 2004, 2005, 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
+ */
+#ifndef _ASM_X86_MUTEX_64_H
+#define _ASM_X86_MUTEX_64_H
+
+/**
+ * __mutex_fastpath_lock - decrement and call function if negative
+ * @v: pointer of type atomic_t
+ * @fail_fn: function to call if the result is negative
+ *
+ * Atomically decrements @v and calls <fail_fn> if the result is negative.
+ */
+#define __mutex_fastpath_lock(v, fail_fn)			\
+do {								\
+	unsigned long dummy;					\
+								\
+	typecheck(atomic_t *, v);				\
+	typecheck_fn(void (*)(atomic_t *), fail_fn);		\
+								\
+	asm volatile(LOCK_PREFIX "   decl (%%rdi)\n"		\
+		     "   jns 1f		\n"			\
+		     "   call " #fail_fn "\n"			\
+		     "1:"					\
+		     : "=D" (dummy)				\
+		     : "D" (v)					\
+		     : "rax", "rsi", "rdx", "rcx",		\
+		       "r8", "r9", "r10", "r11", "memory");	\
+} while (0)
+
+/**
+ *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
+ *                                 from 1 to a 0 value
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call <fail_fn> if
+ * it wasn't 1 originally. This function returns 0 if the fastpath succeeds,
+ * or anything the slow path function returns
+ */
+static inline int __mutex_fastpath_lock_retval(atomic_t *count,
+					       int (*fail_fn)(atomic_t *))
+{
+	if (unlikely(atomic_dec_return(count) < 0))
+		return fail_fn(count);
+	else
+		return 0;
+}
+
+/**
+ * __mutex_fastpath_unlock - increment and call function if nonpositive
+ * @v: pointer of type atomic_t
+ * @fail_fn: function to call if the result is nonpositive
+ *
+ * Atomically increments @v and calls <fail_fn> if the result is nonpositive.
+ */
+#define __mutex_fastpath_unlock(v, fail_fn)			\
+do {								\
+	unsigned long dummy;					\
+								\
+	typecheck(atomic_t *, v);				\
+	typecheck_fn(void (*)(atomic_t *), fail_fn);		\
+								\
+	asm volatile(LOCK_PREFIX "   incl (%%rdi)\n"		\
+		     "   jg 1f\n"				\
+		     "   call " #fail_fn "\n"			\
+		     "1:"					\
+		     : "=D" (dummy)				\
+		     : "D" (v)					\
+		     : "rax", "rsi", "rdx", "rcx",		\
+		       "r8", "r9", "r10", "r11", "memory");	\
+} while (0)
+
+#define __mutex_slowpath_needs_to_unlock()	1
+
+/**
+ * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
+ *
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: fallback function
+ *
+ * Change the count from 1 to 0 and return 1 (success), or return 0 (failure)
+ * if it wasn't 1 originally. [the fallback function is never used on
+ * x86_64, because all x86_64 CPUs have a CMPXCHG instruction.]
+ */
+static inline int __mutex_fastpath_trylock(atomic_t *count,
+					   int (*fail_fn)(atomic_t *))
+{
+	if (likely(atomic_cmpxchg(count, 1, 0) == 1))
+		return 1;
+	else
+		return 0;
+}
+
+#endif /* _ASM_X86_MUTEX_64_H */
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
new file mode 100644
index 0000000..c45a0a5
--- /dev/null
+++ b/arch/x86/include/asm/nmi.h
@@ -0,0 +1,81 @@
+#ifndef _ASM_X86_NMI_H
+#define _ASM_X86_NMI_H
+
+#include <linux/pm.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#ifdef ARCH_HAS_NMI_WATCHDOG
+
+/**
+ * do_nmi_callback
+ *
+ * Check to see if a callback exists and execute it.  Return 1
+ * if the handler exists and was handled successfully.
+ */
+int do_nmi_callback(struct pt_regs *regs, int cpu);
+
+extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
+extern int check_nmi_watchdog(void);
+extern int nmi_watchdog_enabled;
+extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
+extern int avail_to_resrv_perfctr_nmi(unsigned int);
+extern int reserve_perfctr_nmi(unsigned int);
+extern void release_perfctr_nmi(unsigned int);
+extern int reserve_evntsel_nmi(unsigned int);
+extern void release_evntsel_nmi(unsigned int);
+
+extern void setup_apic_nmi_watchdog(void *);
+extern void stop_apic_nmi_watchdog(void *);
+extern void disable_timer_nmi_watchdog(void);
+extern void enable_timer_nmi_watchdog(void);
+extern int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason);
+extern void cpu_nmi_set_wd_enabled(void);
+
+extern atomic_t nmi_active;
+extern unsigned int nmi_watchdog;
+#define NMI_NONE	0
+#define NMI_IO_APIC	1
+#define NMI_LOCAL_APIC	2
+#define NMI_INVALID	3
+
+struct ctl_table;
+struct file;
+extern int proc_nmi_enabled(struct ctl_table *, int , struct file *,
+			void __user *, size_t *, loff_t *);
+extern int unknown_nmi_panic;
+
+void __trigger_all_cpu_backtrace(void);
+#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
+
+static inline void localise_nmi_watchdog(void)
+{
+	if (nmi_watchdog == NMI_IO_APIC)
+		nmi_watchdog = NMI_LOCAL_APIC;
+}
+
+/* check if nmi_watchdog is active (ie was specified at boot) */
+static inline int nmi_watchdog_active(void)
+{
+	/*
+	 * actually it should be:
+	 * 	return (nmi_watchdog == NMI_LOCAL_APIC ||
+	 * 		nmi_watchdog == NMI_IO_APIC)
+	 * but since they are power of two we could use a
+	 * cheaper way --cvg
+	 */
+	return nmi_watchdog & 0x3;
+}
+#endif
+
+void lapic_watchdog_stop(void);
+int lapic_watchdog_init(unsigned nmi_hz);
+int lapic_wd_event(unsigned nmi_hz);
+unsigned lapic_adjust_nmi_hz(unsigned hz);
+int lapic_watchdog_ok(void);
+void disable_lapic_nmi_watchdog(void);
+void enable_lapic_nmi_watchdog(void);
+void stop_nmi(void);
+void restart_nmi(void);
+
+#endif /* _ASM_X86_NMI_H */
diff --git a/arch/x86/include/asm/nops.h b/arch/x86/include/asm/nops.h
new file mode 100644
index 0000000..ad2668e
--- /dev/null
+++ b/arch/x86/include/asm/nops.h
@@ -0,0 +1,118 @@
+#ifndef _ASM_X86_NOPS_H
+#define _ASM_X86_NOPS_H
+
+/* Define nops for use with alternative() */
+
+/* generic versions from gas
+   1: nop
+   the following instructions are NOT nops in 64-bit mode,
+   for 64-bit mode use K8 or P6 nops instead
+   2: movl %esi,%esi
+   3: leal 0x00(%esi),%esi
+   4: leal 0x00(,%esi,1),%esi
+   6: leal 0x00000000(%esi),%esi
+   7: leal 0x00000000(,%esi,1),%esi
+*/
+#define GENERIC_NOP1 ".byte 0x90\n"
+#define GENERIC_NOP2 ".byte 0x89,0xf6\n"
+#define GENERIC_NOP3 ".byte 0x8d,0x76,0x00\n"
+#define GENERIC_NOP4 ".byte 0x8d,0x74,0x26,0x00\n"
+#define GENERIC_NOP5 GENERIC_NOP1 GENERIC_NOP4
+#define GENERIC_NOP6 ".byte 0x8d,0xb6,0x00,0x00,0x00,0x00\n"
+#define GENERIC_NOP7 ".byte 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00\n"
+#define GENERIC_NOP8 GENERIC_NOP1 GENERIC_NOP7
+
+/* Opteron 64bit nops
+   1: nop
+   2: osp nop
+   3: osp osp nop
+   4: osp osp osp nop
+*/
+#define K8_NOP1 GENERIC_NOP1
+#define K8_NOP2	".byte 0x66,0x90\n"
+#define K8_NOP3	".byte 0x66,0x66,0x90\n"
+#define K8_NOP4	".byte 0x66,0x66,0x66,0x90\n"
+#define K8_NOP5	K8_NOP3 K8_NOP2
+#define K8_NOP6	K8_NOP3 K8_NOP3
+#define K8_NOP7	K8_NOP4 K8_NOP3
+#define K8_NOP8	K8_NOP4 K8_NOP4
+
+/* K7 nops
+   uses eax dependencies (arbitary choice)
+   1: nop
+   2: movl %eax,%eax
+   3: leal (,%eax,1),%eax
+   4: leal 0x00(,%eax,1),%eax
+   6: leal 0x00000000(%eax),%eax
+   7: leal 0x00000000(,%eax,1),%eax
+*/
+#define K7_NOP1	GENERIC_NOP1
+#define K7_NOP2	".byte 0x8b,0xc0\n"
+#define K7_NOP3	".byte 0x8d,0x04,0x20\n"
+#define K7_NOP4	".byte 0x8d,0x44,0x20,0x00\n"
+#define K7_NOP5	K7_NOP4 ASM_NOP1
+#define K7_NOP6	".byte 0x8d,0x80,0,0,0,0\n"
+#define K7_NOP7	".byte 0x8D,0x04,0x05,0,0,0,0\n"
+#define K7_NOP8	K7_NOP7 ASM_NOP1
+
+/* P6 nops
+   uses eax dependencies (Intel-recommended choice)
+   1: nop
+   2: osp nop
+   3: nopl (%eax)
+   4: nopl 0x00(%eax)
+   5: nopl 0x00(%eax,%eax,1)
+   6: osp nopl 0x00(%eax,%eax,1)
+   7: nopl 0x00000000(%eax)
+   8: nopl 0x00000000(%eax,%eax,1)
+*/
+#define P6_NOP1	GENERIC_NOP1
+#define P6_NOP2	".byte 0x66,0x90\n"
+#define P6_NOP3	".byte 0x0f,0x1f,0x00\n"
+#define P6_NOP4	".byte 0x0f,0x1f,0x40,0\n"
+#define P6_NOP5	".byte 0x0f,0x1f,0x44,0x00,0\n"
+#define P6_NOP6	".byte 0x66,0x0f,0x1f,0x44,0x00,0\n"
+#define P6_NOP7	".byte 0x0f,0x1f,0x80,0,0,0,0\n"
+#define P6_NOP8	".byte 0x0f,0x1f,0x84,0x00,0,0,0,0\n"
+
+#if defined(CONFIG_MK7)
+#define ASM_NOP1 K7_NOP1
+#define ASM_NOP2 K7_NOP2
+#define ASM_NOP3 K7_NOP3
+#define ASM_NOP4 K7_NOP4
+#define ASM_NOP5 K7_NOP5
+#define ASM_NOP6 K7_NOP6
+#define ASM_NOP7 K7_NOP7
+#define ASM_NOP8 K7_NOP8
+#elif defined(CONFIG_X86_P6_NOP)
+#define ASM_NOP1 P6_NOP1
+#define ASM_NOP2 P6_NOP2
+#define ASM_NOP3 P6_NOP3
+#define ASM_NOP4 P6_NOP4
+#define ASM_NOP5 P6_NOP5
+#define ASM_NOP6 P6_NOP6
+#define ASM_NOP7 P6_NOP7
+#define ASM_NOP8 P6_NOP8
+#elif defined(CONFIG_X86_64)
+#define ASM_NOP1 K8_NOP1
+#define ASM_NOP2 K8_NOP2
+#define ASM_NOP3 K8_NOP3
+#define ASM_NOP4 K8_NOP4
+#define ASM_NOP5 K8_NOP5
+#define ASM_NOP6 K8_NOP6
+#define ASM_NOP7 K8_NOP7
+#define ASM_NOP8 K8_NOP8
+#else
+#define ASM_NOP1 GENERIC_NOP1
+#define ASM_NOP2 GENERIC_NOP2
+#define ASM_NOP3 GENERIC_NOP3
+#define ASM_NOP4 GENERIC_NOP4
+#define ASM_NOP5 GENERIC_NOP5
+#define ASM_NOP6 GENERIC_NOP6
+#define ASM_NOP7 GENERIC_NOP7
+#define ASM_NOP8 GENERIC_NOP8
+#endif
+
+#define ASM_NOP_MAX 8
+
+#endif /* _ASM_X86_NOPS_H */
diff --git a/include/asm-x86/numa.h b/arch/x86/include/asm/numa.h
similarity index 100%
rename from include/asm-x86/numa.h
rename to arch/x86/include/asm/numa.h
diff --git a/arch/x86/include/asm/numa_32.h b/arch/x86/include/asm/numa_32.h
new file mode 100644
index 0000000..e9f5db7
--- /dev/null
+++ b/arch/x86/include/asm/numa_32.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_X86_NUMA_32_H
+#define _ASM_X86_NUMA_32_H
+
+extern int pxm_to_nid(int pxm);
+extern void numa_remove_cpu(int cpu);
+
+#ifdef CONFIG_NUMA
+extern void set_highmem_pages_init(void);
+#endif
+
+#endif /* _ASM_X86_NUMA_32_H */
diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h
new file mode 100644
index 0000000..064ed6d
--- /dev/null
+++ b/arch/x86/include/asm/numa_64.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_X86_NUMA_64_H
+#define _ASM_X86_NUMA_64_H
+
+#include <linux/nodemask.h>
+#include <asm/apicdef.h>
+
+struct bootnode {
+	u64 start;
+	u64 end;
+};
+
+extern int compute_hash_shift(struct bootnode *nodes, int numblks,
+			      int *nodeids);
+
+#define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT))
+
+extern void numa_init_array(void);
+extern int numa_off;
+
+extern void srat_reserve_add_area(int nodeid);
+extern int hotadd_percent;
+
+extern s16 apicid_to_node[MAX_LOCAL_APIC];
+
+extern unsigned long numa_free_all_bootmem(void);
+extern void setup_node_bootmem(int nodeid, unsigned long start,
+			       unsigned long end);
+
+#ifdef CONFIG_NUMA
+extern void __init init_cpu_to_node(void);
+extern void __cpuinit numa_set_node(int cpu, int node);
+extern void __cpuinit numa_clear_node(int cpu);
+extern void __cpuinit numa_add_cpu(int cpu);
+extern void __cpuinit numa_remove_cpu(int cpu);
+#else
+static inline void init_cpu_to_node(void)		{ }
+static inline void numa_set_node(int cpu, int node)	{ }
+static inline void numa_clear_node(int cpu)		{ }
+static inline void numa_add_cpu(int cpu, int node)	{ }
+static inline void numa_remove_cpu(int cpu)		{ }
+#endif
+
+#endif /* _ASM_X86_NUMA_64_H */
diff --git a/arch/x86/include/asm/numaq.h b/arch/x86/include/asm/numaq.h
new file mode 100644
index 0000000..1e8bd30
--- /dev/null
+++ b/arch/x86/include/asm/numaq.h
@@ -0,0 +1,169 @@
+/*
+ * Written by: Patricia Gaughen, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gone@us.ibm.com>
+ */
+
+#ifndef _ASM_X86_NUMAQ_H
+#define _ASM_X86_NUMAQ_H
+
+#ifdef CONFIG_X86_NUMAQ
+
+extern int found_numaq;
+extern int get_memcfg_numaq(void);
+
+/*
+ * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the
+ */
+#define SYS_CFG_DATA_PRIV_ADDR		0x0009d000 /* place for scd in private
+						      quad space */
+
+/*
+ * Communication area for each processor on lynxer-processor tests.
+ *
+ * NOTE: If you change the size of this eachproc structure you need
+ *       to change the definition for EACH_QUAD_SIZE.
+ */
+struct eachquadmem {
+	unsigned int	priv_mem_start;		/* Starting address of this */
+						/* quad's private memory. */
+						/* This is always 0. */
+						/* In MB. */
+	unsigned int	priv_mem_size;		/* Size of this quad's */
+						/* private memory. */
+						/* In MB. */
+	unsigned int	low_shrd_mem_strp_start;/* Starting address of this */
+						/* quad's low shared block */
+						/* (untranslated). */
+						/* In MB. */
+	unsigned int	low_shrd_mem_start;	/* Starting address of this */
+						/* quad's low shared memory */
+						/* (untranslated). */
+						/* In MB. */
+	unsigned int	low_shrd_mem_size;	/* Size of this quad's low */
+						/* shared memory. */
+						/* In MB. */
+	unsigned int	lmmio_copb_start;	/* Starting address of this */
+						/* quad's local memory */
+						/* mapped I/O in the */
+						/* compatibility OPB. */
+						/* In MB. */
+	unsigned int	lmmio_copb_size;	/* Size of this quad's local */
+						/* memory mapped I/O in the */
+						/* compatibility OPB. */
+						/* In MB. */
+	unsigned int	lmmio_nopb_start;	/* Starting address of this */
+						/* quad's local memory */
+						/* mapped I/O in the */
+						/* non-compatibility OPB. */
+						/* In MB. */
+	unsigned int	lmmio_nopb_size;	/* Size of this quad's local */
+						/* memory mapped I/O in the */
+						/* non-compatibility OPB. */
+						/* In MB. */
+	unsigned int	io_apic_0_start;	/* Starting address of I/O */
+						/* APIC 0. */
+	unsigned int	io_apic_0_sz;		/* Size I/O APIC 0. */
+	unsigned int	io_apic_1_start;	/* Starting address of I/O */
+						/* APIC 1. */
+	unsigned int	io_apic_1_sz;		/* Size I/O APIC 1. */
+	unsigned int	hi_shrd_mem_start;	/* Starting address of this */
+						/* quad's high shared memory.*/
+						/* In MB. */
+	unsigned int	hi_shrd_mem_size;	/* Size of this quad's high */
+						/* shared memory. */
+						/* In MB. */
+	unsigned int	mps_table_addr;		/* Address of this quad's */
+						/* MPS tables from BIOS, */
+						/* in system space.*/
+	unsigned int	lcl_MDC_pio_addr;	/* Port-I/O address for */
+						/* local access of MDC. */
+	unsigned int	rmt_MDC_mmpio_addr;	/* MM-Port-I/O address for */
+						/* remote access of MDC. */
+	unsigned int	mm_port_io_start;	/* Starting address of this */
+						/* quad's memory mapped Port */
+						/* I/O space. */
+	unsigned int	mm_port_io_size;	/* Size of this quad's memory*/
+						/* mapped Port I/O space. */
+	unsigned int	mm_rmt_io_apic_start;	/* Starting address of this */
+						/* quad's memory mapped */
+						/* remote I/O APIC space. */
+	unsigned int	mm_rmt_io_apic_size;	/* Size of this quad's memory*/
+						/* mapped remote I/O APIC */
+						/* space. */
+	unsigned int	mm_isa_start;		/* Starting address of this */
+						/* quad's memory mapped ISA */
+						/* space (contains MDC */
+						/* memory space). */
+	unsigned int	mm_isa_size;		/* Size of this quad's memory*/
+						/* mapped ISA space (contains*/
+						/* MDC memory space). */
+	unsigned int	rmt_qmi_addr;		/* Remote addr to access QMI.*/
+	unsigned int	lcl_qmi_addr;		/* Local addr to access QMI. */
+};
+
+/*
+ * Note: This structure must be NOT be changed unless the multiproc and
+ * OS are changed to reflect the new structure.
+ */
+struct sys_cfg_data {
+	unsigned int	quad_id;
+	unsigned int	bsp_proc_id; /* Boot Strap Processor in this quad. */
+	unsigned int	scd_version; /* Version number of this table. */
+	unsigned int	first_quad_id;
+	unsigned int	quads_present31_0; /* 1 bit for each quad */
+	unsigned int	quads_present63_32; /* 1 bit for each quad */
+	unsigned int	config_flags;
+	unsigned int	boot_flags;
+	unsigned int	csr_start_addr; /* Absolute value (not in MB) */
+	unsigned int	csr_size; /* Absolute value (not in MB) */
+	unsigned int	lcl_apic_start_addr; /* Absolute value (not in MB) */
+	unsigned int	lcl_apic_size; /* Absolute value (not in MB) */
+	unsigned int	low_shrd_mem_base; /* 0 or 512MB or 1GB */
+	unsigned int	low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */
+					/* may not be totally populated */
+	unsigned int	split_mem_enbl; /* 0 for no low shared memory */
+	unsigned int	mmio_sz; /* Size of total system memory mapped I/O */
+				 /* (in MB). */
+	unsigned int	quad_spin_lock; /* Spare location used for quad */
+					/* bringup. */
+	unsigned int	nonzero55; /* For checksumming. */
+	unsigned int	nonzeroaa; /* For checksumming. */
+	unsigned int	scd_magic_number;
+	unsigned int	system_type;
+	unsigned int	checksum;
+	/*
+	 *	memory configuration area for each quad
+	 */
+	struct		eachquadmem eq[MAX_NUMNODES];	/* indexed by quad id */
+};
+
+void numaq_tsc_disable(void);
+
+#else
+static inline int get_memcfg_numaq(void)
+{
+	return 0;
+}
+#endif /* CONFIG_X86_NUMAQ */
+#endif /* _ASM_X86_NUMAQ_H */
+
diff --git a/include/asm-x86/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
similarity index 100%
rename from include/asm-x86/numaq/apic.h
rename to arch/x86/include/asm/numaq/apic.h
diff --git a/include/asm-x86/numaq/apicdef.h b/arch/x86/include/asm/numaq/apicdef.h
similarity index 100%
rename from include/asm-x86/numaq/apicdef.h
rename to arch/x86/include/asm/numaq/apicdef.h
diff --git a/include/asm-x86/numaq/ipi.h b/arch/x86/include/asm/numaq/ipi.h
similarity index 100%
rename from include/asm-x86/numaq/ipi.h
rename to arch/x86/include/asm/numaq/ipi.h
diff --git a/include/asm-x86/numaq/mpparse.h b/arch/x86/include/asm/numaq/mpparse.h
similarity index 100%
rename from include/asm-x86/numaq/mpparse.h
rename to arch/x86/include/asm/numaq/mpparse.h
diff --git a/include/asm-x86/numaq/wakecpu.h b/arch/x86/include/asm/numaq/wakecpu.h
similarity index 100%
rename from include/asm-x86/numaq/wakecpu.h
rename to arch/x86/include/asm/numaq/wakecpu.h
diff --git a/arch/x86/include/asm/olpc.h b/arch/x86/include/asm/olpc.h
new file mode 100644
index 0000000..834a302
--- /dev/null
+++ b/arch/x86/include/asm/olpc.h
@@ -0,0 +1,132 @@
+/* OLPC machine specific definitions */
+
+#ifndef _ASM_X86_OLPC_H
+#define _ASM_X86_OLPC_H
+
+#include <asm/geode.h>
+
+struct olpc_platform_t {
+	int flags;
+	uint32_t boardrev;
+	int ecver;
+};
+
+#define OLPC_F_PRESENT		0x01
+#define OLPC_F_DCON		0x02
+#define OLPC_F_VSA		0x04
+
+#ifdef CONFIG_OLPC
+
+extern struct olpc_platform_t olpc_platform_info;
+
+/*
+ * OLPC board IDs contain the major build number within the mask 0x0ff0,
+ * and the minor build number withing 0x000f.  Pre-builds have a minor
+ * number less than 8, and normal builds start at 8.  For example, 0x0B10
+ * is a PreB1, and 0x0C18 is a C1.
+ */
+
+static inline uint32_t olpc_board(uint8_t id)
+{
+	return (id << 4) | 0x8;
+}
+
+static inline uint32_t olpc_board_pre(uint8_t id)
+{
+	return id << 4;
+}
+
+static inline int machine_is_olpc(void)
+{
+	return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0;
+}
+
+/*
+ * The DCON is OLPC's Display Controller.  It has a number of unique
+ * features that we might want to take advantage of..
+ */
+static inline int olpc_has_dcon(void)
+{
+	return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0;
+}
+
+/*
+ * The VSA is software from AMD that typical Geode bioses will include.
+ * It is used to emulate the PCI bus, VGA, etc.  OLPC's Open Firmware does
+ * not include the VSA; instead, PCI is emulated by the kernel.
+ *
+ * The VSA is described further in arch/x86/pci/olpc.c.
+ */
+static inline int olpc_has_vsa(void)
+{
+	return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
+}
+
+/*
+ * The "Mass Production" version of OLPC's XO is identified as being model
+ * C2.  During the prototype phase, the following models (in chronological
+ * order) were created: A1, B1, B2, B3, B4, C1.  The A1 through B2 models
+ * were based on Geode GX CPUs, and models after that were based upon
+ * Geode LX CPUs.  There were also some hand-assembled models floating
+ * around, referred to as PreB1, PreB2, etc.
+ */
+static inline int olpc_board_at_least(uint32_t rev)
+{
+	return olpc_platform_info.boardrev >= rev;
+}
+
+#else
+
+static inline int machine_is_olpc(void)
+{
+	return 0;
+}
+
+static inline int olpc_has_dcon(void)
+{
+	return 0;
+}
+
+static inline int olpc_has_vsa(void)
+{
+	return 0;
+}
+
+#endif
+
+/* EC related functions */
+
+extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
+		unsigned char *outbuf, size_t outlen);
+
+extern int olpc_ec_mask_set(uint8_t bits);
+extern int olpc_ec_mask_unset(uint8_t bits);
+
+/* EC commands */
+
+#define EC_FIRMWARE_REV		0x08
+
+/* SCI source values */
+
+#define EC_SCI_SRC_EMPTY	0x00
+#define EC_SCI_SRC_GAME		0x01
+#define EC_SCI_SRC_BATTERY	0x02
+#define EC_SCI_SRC_BATSOC	0x04
+#define EC_SCI_SRC_BATERR	0x08
+#define EC_SCI_SRC_EBOOK	0x10
+#define EC_SCI_SRC_WLAN		0x20
+#define EC_SCI_SRC_ACPWR	0x40
+#define EC_SCI_SRC_ALL		0x7F
+
+/* GPIO assignments */
+
+#define OLPC_GPIO_MIC_AC	geode_gpio(1)
+#define OLPC_GPIO_DCON_IRQ	geode_gpio(7)
+#define OLPC_GPIO_THRM_ALRM	geode_gpio(10)
+#define OLPC_GPIO_SMB_CLK	geode_gpio(14)
+#define OLPC_GPIO_SMB_DATA	geode_gpio(15)
+#define OLPC_GPIO_WORKAUX	geode_gpio(24)
+#define OLPC_GPIO_LID		geode_gpio(26)
+#define OLPC_GPIO_ECSCI		geode_gpio(27)
+
+#endif /* _ASM_X86_OLPC_H */
diff --git a/arch/x86/include/asm/page.h b/arch/x86/include/asm/page.h
new file mode 100644
index 0000000..e9873a2
--- /dev/null
+++ b/arch/x86/include/asm/page.h
@@ -0,0 +1,209 @@
+#ifndef _ASM_X86_PAGE_H
+#define _ASM_X86_PAGE_H
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+#define __PHYSICAL_MASK		((phys_addr_t)(1ULL << __PHYSICAL_MASK_SHIFT) - 1)
+#define __VIRTUAL_MASK		((1UL << __VIRTUAL_MASK_SHIFT) - 1)
+
+/* Cast PAGE_MASK to a signed type so that it is sign-extended if
+   virtual addresses are 32-bits but physical addresses are larger
+   (ie, 32-bit PAE). */
+#define PHYSICAL_PAGE_MASK	(((signed long)PAGE_MASK) & __PHYSICAL_MASK)
+
+/* PTE_PFN_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
+#define PTE_PFN_MASK		((pteval_t)PHYSICAL_PAGE_MASK)
+
+/* PTE_FLAGS_MASK extracts the flags from a (pte|pmd|pud|pgd)val_t */
+#define PTE_FLAGS_MASK		(~PTE_PFN_MASK)
+
+#define PMD_PAGE_SIZE		(_AC(1, UL) << PMD_SHIFT)
+#define PMD_PAGE_MASK		(~(PMD_PAGE_SIZE-1))
+
+#define HPAGE_SHIFT		PMD_SHIFT
+#define HPAGE_SIZE		(_AC(1,UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+
+#define HUGE_MAX_HSTATE 2
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+
+#ifdef CONFIG_X86_64
+#include <asm/page_64.h>
+#else
+#include <asm/page_32.h>
+#endif	/* CONFIG_X86_64 */
+
+#define PAGE_OFFSET		((unsigned long)__PAGE_OFFSET)
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+
+#ifndef __ASSEMBLY__
+
+typedef struct { pgdval_t pgd; } pgd_t;
+typedef struct { pgprotval_t pgprot; } pgprot_t;
+
+extern int page_is_ram(unsigned long pagenr);
+extern int pagerange_is_ram(unsigned long start, unsigned long end);
+extern int devmem_is_allowed(unsigned long pagenr);
+extern void map_devmem(unsigned long pfn, unsigned long size,
+		       pgprot_t vma_prot);
+extern void unmap_devmem(unsigned long pfn, unsigned long size,
+			 pgprot_t vma_prot);
+
+extern unsigned long max_low_pfn_mapped;
+extern unsigned long max_pfn_mapped;
+
+struct page;
+
+static inline void clear_user_page(void *page, unsigned long vaddr,
+				struct page *pg)
+{
+	clear_page(page);
+}
+
+static inline void copy_user_page(void *to, void *from, unsigned long vaddr,
+				struct page *topage)
+{
+	copy_page(to, from);
+}
+
+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
+	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+static inline pgd_t native_make_pgd(pgdval_t val)
+{
+	return (pgd_t) { val };
+}
+
+static inline pgdval_t native_pgd_val(pgd_t pgd)
+{
+	return pgd.pgd;
+}
+
+#if PAGETABLE_LEVELS >= 3
+#if PAGETABLE_LEVELS == 4
+typedef struct { pudval_t pud; } pud_t;
+
+static inline pud_t native_make_pud(pmdval_t val)
+{
+	return (pud_t) { val };
+}
+
+static inline pudval_t native_pud_val(pud_t pud)
+{
+	return pud.pud;
+}
+#else	/* PAGETABLE_LEVELS == 3 */
+#include <asm-generic/pgtable-nopud.h>
+
+static inline pudval_t native_pud_val(pud_t pud)
+{
+	return native_pgd_val(pud.pgd);
+}
+#endif	/* PAGETABLE_LEVELS == 4 */
+
+typedef struct { pmdval_t pmd; } pmd_t;
+
+static inline pmd_t native_make_pmd(pmdval_t val)
+{
+	return (pmd_t) { val };
+}
+
+static inline pmdval_t native_pmd_val(pmd_t pmd)
+{
+	return pmd.pmd;
+}
+#else  /* PAGETABLE_LEVELS == 2 */
+#include <asm-generic/pgtable-nopmd.h>
+
+static inline pmdval_t native_pmd_val(pmd_t pmd)
+{
+	return native_pgd_val(pmd.pud.pgd);
+}
+#endif	/* PAGETABLE_LEVELS >= 3 */
+
+static inline pte_t native_make_pte(pteval_t val)
+{
+	return (pte_t) { .pte = val };
+}
+
+static inline pteval_t native_pte_val(pte_t pte)
+{
+	return pte.pte;
+}
+
+static inline pteval_t native_pte_flags(pte_t pte)
+{
+	return native_pte_val(pte) & PTE_FLAGS_MASK;
+}
+
+#define pgprot_val(x)	((x).pgprot)
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else  /* !CONFIG_PARAVIRT */
+
+#define pgd_val(x)	native_pgd_val(x)
+#define __pgd(x)	native_make_pgd(x)
+
+#ifndef __PAGETABLE_PUD_FOLDED
+#define pud_val(x)	native_pud_val(x)
+#define __pud(x)	native_make_pud(x)
+#endif
+
+#ifndef __PAGETABLE_PMD_FOLDED
+#define pmd_val(x)	native_pmd_val(x)
+#define __pmd(x)	native_make_pmd(x)
+#endif
+
+#define pte_val(x)	native_pte_val(x)
+#define pte_flags(x)	native_pte_flags(x)
+#define __pte(x)	native_make_pte(x)
+
+#endif	/* CONFIG_PARAVIRT */
+
+#define __pa(x)		__phys_addr((unsigned long)(x))
+#define __pa_nodebug(x)	__phys_addr_nodebug((unsigned long)(x))
+/* __pa_symbol should be used for C visible symbols.
+   This seems to be the official gcc blessed way to do such arithmetic. */
+#define __pa_symbol(x)	__pa(__phys_reloc_hide((unsigned long)(x)))
+
+#define __va(x)			((void *)((unsigned long)(x)+PAGE_OFFSET))
+
+#define __boot_va(x)		__va(x)
+#define __boot_pa(x)		__pa(x)
+
+/*
+ * virt_to_page(kaddr) returns a valid pointer if and only if
+ * virt_addr_valid(kaddr) returns true.
+ */
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_kaddr(pfn)      __va((pfn) << PAGE_SHIFT)
+extern bool __virt_addr_valid(unsigned long kaddr);
+#define virt_addr_valid(kaddr)	__virt_addr_valid((unsigned long) (kaddr))
+
+#endif	/* __ASSEMBLY__ */
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#define __HAVE_ARCH_GATE_AREA 1
+
+#endif	/* __KERNEL__ */
+#endif /* _ASM_X86_PAGE_H */
diff --git a/arch/x86/include/asm/page_32.h b/arch/x86/include/asm/page_32.h
new file mode 100644
index 0000000..bcde0d7
--- /dev/null
+++ b/arch/x86/include/asm/page_32.h
@@ -0,0 +1,136 @@
+#ifndef _ASM_X86_PAGE_32_H
+#define _ASM_X86_PAGE_32_H
+
+/*
+ * This handles the memory map.
+ *
+ * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 950MB.
+ *
+ * If you want more physical memory than this then see the CONFIG_HIGHMEM4G
+ * and CONFIG_HIGHMEM64G options in the kernel configuration.
+ */
+#define __PAGE_OFFSET		_AC(CONFIG_PAGE_OFFSET, UL)
+
+#ifdef CONFIG_4KSTACKS
+#define THREAD_ORDER	0
+#else
+#define THREAD_ORDER	1
+#endif
+#define THREAD_SIZE 	(PAGE_SIZE << THREAD_ORDER)
+
+#define STACKFAULT_STACK 0
+#define DOUBLEFAULT_STACK 1
+#define NMI_STACK 0
+#define DEBUG_STACK 0
+#define MCE_STACK 0
+#define N_EXCEPTION_STACKS 1
+
+#ifdef CONFIG_X86_PAE
+/* 44=32+12, the limit we can fit into an unsigned long pfn */
+#define __PHYSICAL_MASK_SHIFT	44
+#define __VIRTUAL_MASK_SHIFT	32
+#define PAGETABLE_LEVELS	3
+
+#ifndef __ASSEMBLY__
+typedef u64	pteval_t;
+typedef u64	pmdval_t;
+typedef u64	pudval_t;
+typedef u64	pgdval_t;
+typedef u64	pgprotval_t;
+
+typedef union {
+	struct {
+		unsigned long pte_low, pte_high;
+	};
+	pteval_t pte;
+} pte_t;
+#endif	/* __ASSEMBLY__
+ */
+#else  /* !CONFIG_X86_PAE */
+#define __PHYSICAL_MASK_SHIFT	32
+#define __VIRTUAL_MASK_SHIFT	32
+#define PAGETABLE_LEVELS	2
+
+#ifndef __ASSEMBLY__
+typedef unsigned long	pteval_t;
+typedef unsigned long	pmdval_t;
+typedef unsigned long	pudval_t;
+typedef unsigned long	pgdval_t;
+typedef unsigned long	pgprotval_t;
+
+typedef union {
+	pteval_t pte;
+	pteval_t pte_low;
+} pte_t;
+
+#endif	/* __ASSEMBLY__ */
+#endif	/* CONFIG_X86_PAE */
+
+#ifndef __ASSEMBLY__
+typedef struct page *pgtable_t;
+#endif
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#endif
+
+#ifndef __ASSEMBLY__
+#define __phys_addr_nodebug(x)	((x) - PAGE_OFFSET)
+#ifdef CONFIG_DEBUG_VIRTUAL
+extern unsigned long __phys_addr(unsigned long);
+#else
+#define __phys_addr(x)		__phys_addr_nodebug(x)
+#endif
+#define __phys_reloc_hide(x)	RELOC_HIDE((x), 0)
+
+#ifdef CONFIG_FLATMEM
+#define pfn_valid(pfn)		((pfn) < max_mapnr)
+#endif /* CONFIG_FLATMEM */
+
+extern int nx_enabled;
+
+/*
+ * This much address space is reserved for vmalloc() and iomap()
+ * as well as fixmap mappings.
+ */
+extern unsigned int __VMALLOC_RESERVE;
+extern int sysctl_legacy_va_layout;
+
+extern void find_low_pfn_range(void);
+extern unsigned long init_memory_mapping(unsigned long start,
+					 unsigned long end);
+extern void initmem_init(unsigned long, unsigned long);
+extern void free_initmem(void);
+extern void setup_bootmem_allocator(void);
+
+
+#ifdef CONFIG_X86_USE_3DNOW
+#include <asm/mmx.h>
+
+static inline void clear_page(void *page)
+{
+	mmx_clear_page(page);
+}
+
+static inline void copy_page(void *to, void *from)
+{
+	mmx_copy_page(to, from);
+}
+#else  /* !CONFIG_X86_USE_3DNOW */
+#include <linux/string.h>
+
+static inline void clear_page(void *page)
+{
+	memset(page, 0, PAGE_SIZE);
+}
+
+static inline void copy_page(void *to, void *from)
+{
+	memcpy(to, from, PAGE_SIZE);
+}
+#endif	/* CONFIG_X86_3DNOW */
+#endif	/* !__ASSEMBLY__ */
+
+#endif /* _ASM_X86_PAGE_32_H */
diff --git a/arch/x86/include/asm/page_64.h b/arch/x86/include/asm/page_64.h
new file mode 100644
index 0000000..5ebca29
--- /dev/null
+++ b/arch/x86/include/asm/page_64.h
@@ -0,0 +1,105 @@
+#ifndef _ASM_X86_PAGE_64_H
+#define _ASM_X86_PAGE_64_H
+
+#define PAGETABLE_LEVELS	4
+
+#define THREAD_ORDER	1
+#define THREAD_SIZE  (PAGE_SIZE << THREAD_ORDER)
+#define CURRENT_MASK (~(THREAD_SIZE - 1))
+
+#define EXCEPTION_STACK_ORDER 0
+#define EXCEPTION_STKSZ (PAGE_SIZE << EXCEPTION_STACK_ORDER)
+
+#define DEBUG_STACK_ORDER (EXCEPTION_STACK_ORDER + 1)
+#define DEBUG_STKSZ (PAGE_SIZE << DEBUG_STACK_ORDER)
+
+#define IRQSTACK_ORDER 2
+#define IRQSTACKSIZE (PAGE_SIZE << IRQSTACK_ORDER)
+
+#define STACKFAULT_STACK 1
+#define DOUBLEFAULT_STACK 2
+#define NMI_STACK 3
+#define DEBUG_STACK 4
+#define MCE_STACK 5
+#define N_EXCEPTION_STACKS 5  /* hw limit: 7 */
+
+#define PUD_PAGE_SIZE		(_AC(1, UL) << PUD_SHIFT)
+#define PUD_PAGE_MASK		(~(PUD_PAGE_SIZE-1))
+
+/*
+ * Set __PAGE_OFFSET to the most negative possible address +
+ * PGDIR_SIZE*16 (pgd slot 272).  The gap is to allow a space for a
+ * hypervisor to fit.  Choosing 16 slots here is arbitrary, but it's
+ * what Xen requires.
+ */
+#define __PAGE_OFFSET           _AC(0xffff880000000000, UL)
+
+#define __PHYSICAL_START	CONFIG_PHYSICAL_START
+#define __KERNEL_ALIGN		0x200000
+
+/*
+ * Make sure kernel is aligned to 2MB address. Catching it at compile
+ * time is better. Change your config file and compile the kernel
+ * for a 2MB aligned address (CONFIG_PHYSICAL_START)
+ */
+#if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0
+#error "CONFIG_PHYSICAL_START must be a multiple of 2MB"
+#endif
+
+#define __START_KERNEL		(__START_KERNEL_map + __PHYSICAL_START)
+#define __START_KERNEL_map	_AC(0xffffffff80000000, UL)
+
+/* See Documentation/x86_64/mm.txt for a description of the memory map. */
+#define __PHYSICAL_MASK_SHIFT	46
+#define __VIRTUAL_MASK_SHIFT	48
+
+/*
+ * Kernel image size is limited to 512 MB (see level2_kernel_pgt in
+ * arch/x86/kernel/head_64.S), and it is mapped here:
+ */
+#define KERNEL_IMAGE_SIZE	(512 * 1024 * 1024)
+#define KERNEL_IMAGE_START	_AC(0xffffffff80000000, UL)
+
+#ifndef __ASSEMBLY__
+void clear_page(void *page);
+void copy_page(void *to, void *from);
+
+/* duplicated to the one in bootmem.h */
+extern unsigned long max_pfn;
+extern unsigned long phys_base;
+
+extern unsigned long __phys_addr(unsigned long);
+#define __phys_reloc_hide(x)	(x)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef unsigned long	pteval_t;
+typedef unsigned long	pmdval_t;
+typedef unsigned long	pudval_t;
+typedef unsigned long	pgdval_t;
+typedef unsigned long	pgprotval_t;
+
+typedef struct page *pgtable_t;
+
+typedef struct { pteval_t pte; } pte_t;
+
+#define vmemmap ((struct page *)VMEMMAP_START)
+
+extern unsigned long init_memory_mapping(unsigned long start,
+					 unsigned long end);
+
+extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
+extern void free_initmem(void);
+
+extern void init_extra_mapping_uc(unsigned long phys, unsigned long size);
+extern void init_extra_mapping_wb(unsigned long phys, unsigned long size);
+
+#endif	/* !__ASSEMBLY__ */
+
+#ifdef CONFIG_FLATMEM
+#define pfn_valid(pfn)          ((pfn) < max_pfn)
+#endif
+
+
+#endif /* _ASM_X86_PAGE_64_H */
diff --git a/arch/x86/include/asm/param.h b/arch/x86/include/asm/param.h
new file mode 100644
index 0000000..6f0d042
--- /dev/null
+++ b/arch/x86/include/asm/param.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_X86_PARAM_H
+#define _ASM_X86_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100		/* some user interfaces are */
+# define CLOCKS_PER_SEC	(USER_HZ)       /* in "ticks" like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _ASM_X86_PARAM_H */
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
new file mode 100644
index 0000000..ba3e2ff
--- /dev/null
+++ b/arch/x86/include/asm/paravirt.h
@@ -0,0 +1,1650 @@
+#ifndef _ASM_X86_PARAVIRT_H
+#define _ASM_X86_PARAVIRT_H
+/* Various instructions on x86 need to be replaced for
+ * para-virtualization: those hooks are defined here. */
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/page.h>
+#include <asm/asm.h>
+
+/* Bitmask of what can be clobbered: usually at least eax. */
+#define CLBR_NONE 0
+#define CLBR_EAX  (1 << 0)
+#define CLBR_ECX  (1 << 1)
+#define CLBR_EDX  (1 << 2)
+
+#ifdef CONFIG_X86_64
+#define CLBR_RSI  (1 << 3)
+#define CLBR_RDI  (1 << 4)
+#define CLBR_R8   (1 << 5)
+#define CLBR_R9   (1 << 6)
+#define CLBR_R10  (1 << 7)
+#define CLBR_R11  (1 << 8)
+#define CLBR_ANY  ((1 << 9) - 1)
+#include <asm/desc_defs.h>
+#else
+/* CLBR_ANY should match all regs platform has. For i386, that's just it */
+#define CLBR_ANY  ((1 << 3) - 1)
+#endif /* X86_64 */
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <asm/kmap_types.h>
+#include <asm/desc_defs.h>
+
+struct page;
+struct thread_struct;
+struct desc_ptr;
+struct tss_struct;
+struct mm_struct;
+struct desc_struct;
+
+/* general info */
+struct pv_info {
+	unsigned int kernel_rpl;
+	int shared_kernel_pmd;
+	int paravirt_enabled;
+	const char *name;
+};
+
+struct pv_init_ops {
+	/*
+	 * Patch may replace one of the defined code sequences with
+	 * arbitrary code, subject to the same register constraints.
+	 * This generally means the code is not free to clobber any
+	 * registers other than EAX.  The patch function should return
+	 * the number of bytes of code generated, as we nop pad the
+	 * rest in generic code.
+	 */
+	unsigned (*patch)(u8 type, u16 clobber, void *insnbuf,
+			  unsigned long addr, unsigned len);
+
+	/* Basic arch-specific setup */
+	void (*arch_setup)(void);
+	char *(*memory_setup)(void);
+	void (*post_allocator_init)(void);
+
+	/* Print a banner to identify the environment */
+	void (*banner)(void);
+};
+
+
+struct pv_lazy_ops {
+	/* Set deferred update mode, used for batching operations. */
+	void (*enter)(void);
+	void (*leave)(void);
+};
+
+struct pv_time_ops {
+	void (*time_init)(void);
+
+	/* Set and set time of day */
+	unsigned long (*get_wallclock)(void);
+	int (*set_wallclock)(unsigned long);
+
+	unsigned long long (*sched_clock)(void);
+	unsigned long (*get_tsc_khz)(void);
+};
+
+struct pv_cpu_ops {
+	/* hooks for various privileged instructions */
+	unsigned long (*get_debugreg)(int regno);
+	void (*set_debugreg)(int regno, unsigned long value);
+
+	void (*clts)(void);
+
+	unsigned long (*read_cr0)(void);
+	void (*write_cr0)(unsigned long);
+
+	unsigned long (*read_cr4_safe)(void);
+	unsigned long (*read_cr4)(void);
+	void (*write_cr4)(unsigned long);
+
+#ifdef CONFIG_X86_64
+	unsigned long (*read_cr8)(void);
+	void (*write_cr8)(unsigned long);
+#endif
+
+	/* Segment descriptor handling */
+	void (*load_tr_desc)(void);
+	void (*load_gdt)(const struct desc_ptr *);
+	void (*load_idt)(const struct desc_ptr *);
+	void (*store_gdt)(struct desc_ptr *);
+	void (*store_idt)(struct desc_ptr *);
+	void (*set_ldt)(const void *desc, unsigned entries);
+	unsigned long (*store_tr)(void);
+	void (*load_tls)(struct thread_struct *t, unsigned int cpu);
+#ifdef CONFIG_X86_64
+	void (*load_gs_index)(unsigned int idx);
+#endif
+	void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum,
+				const void *desc);
+	void (*write_gdt_entry)(struct desc_struct *,
+				int entrynum, const void *desc, int size);
+	void (*write_idt_entry)(gate_desc *,
+				int entrynum, const gate_desc *gate);
+	void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries);
+	void (*free_ldt)(struct desc_struct *ldt, unsigned entries);
+
+	void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t);
+
+	void (*set_iopl_mask)(unsigned mask);
+
+	void (*wbinvd)(void);
+	void (*io_delay)(void);
+
+	/* cpuid emulation, mostly so that caps bits can be disabled */
+	void (*cpuid)(unsigned int *eax, unsigned int *ebx,
+		      unsigned int *ecx, unsigned int *edx);
+
+	/* MSR, PMC and TSR operations.
+	   err = 0/-EFAULT.  wrmsr returns 0/-EFAULT. */
+	u64 (*read_msr_amd)(unsigned int msr, int *err);
+	u64 (*read_msr)(unsigned int msr, int *err);
+	int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
+
+	u64 (*read_tsc)(void);
+	u64 (*read_pmc)(int counter);
+	unsigned long long (*read_tscp)(unsigned int *aux);
+
+	/*
+	 * Atomically enable interrupts and return to userspace.  This
+	 * is only ever used to return to 32-bit processes; in a
+	 * 64-bit kernel, it's used for 32-on-64 compat processes, but
+	 * never native 64-bit processes.  (Jump, not call.)
+	 */
+	void (*irq_enable_sysexit)(void);
+
+	/*
+	 * Switch to usermode gs and return to 64-bit usermode using
+	 * sysret.  Only used in 64-bit kernels to return to 64-bit
+	 * processes.  Usermode register state, including %rsp, must
+	 * already be restored.
+	 */
+	void (*usergs_sysret64)(void);
+
+	/*
+	 * Switch to usermode gs and return to 32-bit usermode using
+	 * sysret.  Used to return to 32-on-64 compat processes.
+	 * Other usermode register state, including %esp, must already
+	 * be restored.
+	 */
+	void (*usergs_sysret32)(void);
+
+	/* Normal iret.  Jump to this with the standard iret stack
+	   frame set up. */
+	void (*iret)(void);
+
+	void (*swapgs)(void);
+
+	struct pv_lazy_ops lazy_mode;
+};
+
+struct pv_irq_ops {
+	void (*init_IRQ)(void);
+
+	/*
+	 * Get/set interrupt state.  save_fl and restore_fl are only
+	 * expected to use X86_EFLAGS_IF; all other bits
+	 * returned from save_fl are undefined, and may be ignored by
+	 * restore_fl.
+	 */
+	unsigned long (*save_fl)(void);
+	void (*restore_fl)(unsigned long);
+	void (*irq_disable)(void);
+	void (*irq_enable)(void);
+	void (*safe_halt)(void);
+	void (*halt)(void);
+
+#ifdef CONFIG_X86_64
+	void (*adjust_exception_frame)(void);
+#endif
+};
+
+struct pv_apic_ops {
+#ifdef CONFIG_X86_LOCAL_APIC
+	void (*setup_boot_clock)(void);
+	void (*setup_secondary_clock)(void);
+
+	void (*startup_ipi_hook)(int phys_apicid,
+				 unsigned long start_eip,
+				 unsigned long start_esp);
+#endif
+};
+
+struct pv_mmu_ops {
+	/*
+	 * Called before/after init_mm pagetable setup. setup_start
+	 * may reset %cr3, and may pre-install parts of the pagetable;
+	 * pagetable setup is expected to preserve any existing
+	 * mapping.
+	 */
+	void (*pagetable_setup_start)(pgd_t *pgd_base);
+	void (*pagetable_setup_done)(pgd_t *pgd_base);
+
+	unsigned long (*read_cr2)(void);
+	void (*write_cr2)(unsigned long);
+
+	unsigned long (*read_cr3)(void);
+	void (*write_cr3)(unsigned long);
+
+	/*
+	 * Hooks for intercepting the creation/use/destruction of an
+	 * mm_struct.
+	 */
+	void (*activate_mm)(struct mm_struct *prev,
+			    struct mm_struct *next);
+	void (*dup_mmap)(struct mm_struct *oldmm,
+			 struct mm_struct *mm);
+	void (*exit_mmap)(struct mm_struct *mm);
+
+
+	/* TLB operations */
+	void (*flush_tlb_user)(void);
+	void (*flush_tlb_kernel)(void);
+	void (*flush_tlb_single)(unsigned long addr);
+	void (*flush_tlb_others)(const cpumask_t *cpus, struct mm_struct *mm,
+				 unsigned long va);
+
+	/* Hooks for allocating and freeing a pagetable top-level */
+	int  (*pgd_alloc)(struct mm_struct *mm);
+	void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd);
+
+	/*
+	 * Hooks for allocating/releasing pagetable pages when they're
+	 * attached to a pagetable
+	 */
+	void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn);
+	void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn);
+	void (*alloc_pmd_clone)(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count);
+	void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn);
+	void (*release_pte)(unsigned long pfn);
+	void (*release_pmd)(unsigned long pfn);
+	void (*release_pud)(unsigned long pfn);
+
+	/* Pagetable manipulation functions */
+	void (*set_pte)(pte_t *ptep, pte_t pteval);
+	void (*set_pte_at)(struct mm_struct *mm, unsigned long addr,
+			   pte_t *ptep, pte_t pteval);
+	void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval);
+	void (*pte_update)(struct mm_struct *mm, unsigned long addr,
+			   pte_t *ptep);
+	void (*pte_update_defer)(struct mm_struct *mm,
+				 unsigned long addr, pte_t *ptep);
+
+	pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr,
+					pte_t *ptep);
+	void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr,
+					pte_t *ptep, pte_t pte);
+
+	pteval_t (*pte_val)(pte_t);
+	pteval_t (*pte_flags)(pte_t);
+	pte_t (*make_pte)(pteval_t pte);
+
+	pgdval_t (*pgd_val)(pgd_t);
+	pgd_t (*make_pgd)(pgdval_t pgd);
+
+#if PAGETABLE_LEVELS >= 3
+#ifdef CONFIG_X86_PAE
+	void (*set_pte_atomic)(pte_t *ptep, pte_t pteval);
+	void (*set_pte_present)(struct mm_struct *mm, unsigned long addr,
+				pte_t *ptep, pte_t pte);
+	void (*pte_clear)(struct mm_struct *mm, unsigned long addr,
+			  pte_t *ptep);
+	void (*pmd_clear)(pmd_t *pmdp);
+
+#endif	/* CONFIG_X86_PAE */
+
+	void (*set_pud)(pud_t *pudp, pud_t pudval);
+
+	pmdval_t (*pmd_val)(pmd_t);
+	pmd_t (*make_pmd)(pmdval_t pmd);
+
+#if PAGETABLE_LEVELS == 4
+	pudval_t (*pud_val)(pud_t);
+	pud_t (*make_pud)(pudval_t pud);
+
+	void (*set_pgd)(pgd_t *pudp, pgd_t pgdval);
+#endif	/* PAGETABLE_LEVELS == 4 */
+#endif	/* PAGETABLE_LEVELS >= 3 */
+
+#ifdef CONFIG_HIGHPTE
+	void *(*kmap_atomic_pte)(struct page *page, enum km_type type);
+#endif
+
+	struct pv_lazy_ops lazy_mode;
+
+	/* dom0 ops */
+
+	/* Sometimes the physical address is a pfn, and sometimes its
+	   an mfn.  We can tell which is which from the index. */
+	void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
+			   unsigned long phys, pgprot_t flags);
+};
+
+struct raw_spinlock;
+struct pv_lock_ops {
+	int (*spin_is_locked)(struct raw_spinlock *lock);
+	int (*spin_is_contended)(struct raw_spinlock *lock);
+	void (*spin_lock)(struct raw_spinlock *lock);
+	void (*spin_lock_flags)(struct raw_spinlock *lock, unsigned long flags);
+	int (*spin_trylock)(struct raw_spinlock *lock);
+	void (*spin_unlock)(struct raw_spinlock *lock);
+};
+
+/* This contains all the paravirt structures: we get a convenient
+ * number for each function using the offset which we use to indicate
+ * what to patch. */
+struct paravirt_patch_template {
+	struct pv_init_ops pv_init_ops;
+	struct pv_time_ops pv_time_ops;
+	struct pv_cpu_ops pv_cpu_ops;
+	struct pv_irq_ops pv_irq_ops;
+	struct pv_apic_ops pv_apic_ops;
+	struct pv_mmu_ops pv_mmu_ops;
+	struct pv_lock_ops pv_lock_ops;
+};
+
+extern struct pv_info pv_info;
+extern struct pv_init_ops pv_init_ops;
+extern struct pv_time_ops pv_time_ops;
+extern struct pv_cpu_ops pv_cpu_ops;
+extern struct pv_irq_ops pv_irq_ops;
+extern struct pv_apic_ops pv_apic_ops;
+extern struct pv_mmu_ops pv_mmu_ops;
+extern struct pv_lock_ops pv_lock_ops;
+
+#define PARAVIRT_PATCH(x)					\
+	(offsetof(struct paravirt_patch_template, x) / sizeof(void *))
+
+#define paravirt_type(op)				\
+	[paravirt_typenum] "i" (PARAVIRT_PATCH(op)),	\
+	[paravirt_opptr] "m" (op)
+#define paravirt_clobber(clobber)		\
+	[paravirt_clobber] "i" (clobber)
+
+/*
+ * Generate some code, and mark it as patchable by the
+ * apply_paravirt() alternate instruction patcher.
+ */
+#define _paravirt_alt(insn_string, type, clobber)	\
+	"771:\n\t" insn_string "\n" "772:\n"		\
+	".pushsection .parainstructions,\"a\"\n"	\
+	_ASM_ALIGN "\n"					\
+	_ASM_PTR " 771b\n"				\
+	"  .byte " type "\n"				\
+	"  .byte 772b-771b\n"				\
+	"  .short " clobber "\n"			\
+	".popsection\n"
+
+/* Generate patchable code, with the default asm parameters. */
+#define paravirt_alt(insn_string)					\
+	_paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
+
+/* Simple instruction patching code. */
+#define DEF_NATIVE(ops, name, code) 					\
+	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
+	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
+
+unsigned paravirt_patch_nop(void);
+unsigned paravirt_patch_ignore(unsigned len);
+unsigned paravirt_patch_call(void *insnbuf,
+			     const void *target, u16 tgt_clobbers,
+			     unsigned long addr, u16 site_clobbers,
+			     unsigned len);
+unsigned paravirt_patch_jmp(void *insnbuf, const void *target,
+			    unsigned long addr, unsigned len);
+unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
+				unsigned long addr, unsigned len);
+
+unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
+			      const char *start, const char *end);
+
+unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
+		      unsigned long addr, unsigned len);
+
+int paravirt_disable_iospace(void);
+
+/*
+ * This generates an indirect call based on the operation type number.
+ * The type number, computed in PARAVIRT_PATCH, is derived from the
+ * offset into the paravirt_patch_template structure, and can therefore be
+ * freely converted back into a structure offset.
+ */
+#define PARAVIRT_CALL	"call *%[paravirt_opptr];"
+
+/*
+ * These macros are intended to wrap calls through one of the paravirt
+ * ops structs, so that they can be later identified and patched at
+ * runtime.
+ *
+ * Normally, a call to a pv_op function is a simple indirect call:
+ * (pv_op_struct.operations)(args...).
+ *
+ * Unfortunately, this is a relatively slow operation for modern CPUs,
+ * because it cannot necessarily determine what the destination
+ * address is.  In this case, the address is a runtime constant, so at
+ * the very least we can patch the call to e a simple direct call, or
+ * ideally, patch an inline implementation into the callsite.  (Direct
+ * calls are essentially free, because the call and return addresses
+ * are completely predictable.)
+ *
+ * For i386, these macros rely on the standard gcc "regparm(3)" calling
+ * convention, in which the first three arguments are placed in %eax,
+ * %edx, %ecx (in that order), and the remaining arguments are placed
+ * on the stack.  All caller-save registers (eax,edx,ecx) are expected
+ * to be modified (either clobbered or used for return values).
+ * X86_64, on the other hand, already specifies a register-based calling
+ * conventions, returning at %rax, with parameteres going on %rdi, %rsi,
+ * %rdx, and %rcx. Note that for this reason, x86_64 does not need any
+ * special handling for dealing with 4 arguments, unlike i386.
+ * However, x86_64 also have to clobber all caller saved registers, which
+ * unfortunately, are quite a bit (r8 - r11)
+ *
+ * The call instruction itself is marked by placing its start address
+ * and size into the .parainstructions section, so that
+ * apply_paravirt() in arch/i386/kernel/alternative.c can do the
+ * appropriate patching under the control of the backend pv_init_ops
+ * implementation.
+ *
+ * Unfortunately there's no way to get gcc to generate the args setup
+ * for the call, and then allow the call itself to be generated by an
+ * inline asm.  Because of this, we must do the complete arg setup and
+ * return value handling from within these macros.  This is fairly
+ * cumbersome.
+ *
+ * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments.
+ * It could be extended to more arguments, but there would be little
+ * to be gained from that.  For each number of arguments, there are
+ * the two VCALL and CALL variants for void and non-void functions.
+ *
+ * When there is a return value, the invoker of the macro must specify
+ * the return type.  The macro then uses sizeof() on that type to
+ * determine whether its a 32 or 64 bit value, and places the return
+ * in the right register(s) (just %eax for 32-bit, and %edx:%eax for
+ * 64-bit). For x86_64 machines, it just returns at %rax regardless of
+ * the return value size.
+ *
+ * 64-bit arguments are passed as a pair of adjacent 32-bit arguments
+ * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments
+ * in low,high order
+ *
+ * Small structures are passed and returned in registers.  The macro
+ * calling convention can't directly deal with this, so the wrapper
+ * functions must do this.
+ *
+ * These PVOP_* macros are only defined within this header.  This
+ * means that all uses must be wrapped in inline functions.  This also
+ * makes sure the incoming and outgoing types are always correct.
+ */
+#ifdef CONFIG_X86_32
+#define PVOP_VCALL_ARGS			unsigned long __eax, __edx, __ecx
+#define PVOP_CALL_ARGS			PVOP_VCALL_ARGS
+#define PVOP_VCALL_CLOBBERS		"=a" (__eax), "=d" (__edx),	\
+					"=c" (__ecx)
+#define PVOP_CALL_CLOBBERS		PVOP_VCALL_CLOBBERS
+#define EXTRA_CLOBBERS
+#define VEXTRA_CLOBBERS
+#else
+#define PVOP_VCALL_ARGS		unsigned long __edi, __esi, __edx, __ecx
+#define PVOP_CALL_ARGS		PVOP_VCALL_ARGS, __eax
+#define PVOP_VCALL_CLOBBERS	"=D" (__edi),				\
+				"=S" (__esi), "=d" (__edx),		\
+				"=c" (__ecx)
+
+#define PVOP_CALL_CLOBBERS	PVOP_VCALL_CLOBBERS, "=a" (__eax)
+
+#define EXTRA_CLOBBERS	 , "r8", "r9", "r10", "r11"
+#define VEXTRA_CLOBBERS	 , "rax", "r8", "r9", "r10", "r11"
+#endif
+
+#ifdef CONFIG_PARAVIRT_DEBUG
+#define PVOP_TEST_NULL(op)	BUG_ON(op == NULL)
+#else
+#define PVOP_TEST_NULL(op)	((void)op)
+#endif
+
+#define __PVOP_CALL(rettype, op, pre, post, ...)			\
+	({								\
+		rettype __ret;						\
+		PVOP_CALL_ARGS;					\
+		PVOP_TEST_NULL(op);					\
+		/* This is 32-bit specific, but is okay in 64-bit */	\
+		/* since this condition will never hold */		\
+		if (sizeof(rettype) > sizeof(unsigned long)) {		\
+			asm volatile(pre				\
+				     paravirt_alt(PARAVIRT_CALL)	\
+				     post				\
+				     : PVOP_CALL_CLOBBERS		\
+				     : paravirt_type(op),		\
+				       paravirt_clobber(CLBR_ANY),	\
+				       ##__VA_ARGS__			\
+				     : "memory", "cc" EXTRA_CLOBBERS);	\
+			__ret = (rettype)((((u64)__edx) << 32) | __eax); \
+		} else {						\
+			asm volatile(pre				\
+				     paravirt_alt(PARAVIRT_CALL)	\
+				     post				\
+				     : PVOP_CALL_CLOBBERS		\
+				     : paravirt_type(op),		\
+				       paravirt_clobber(CLBR_ANY),	\
+				       ##__VA_ARGS__			\
+				     : "memory", "cc" EXTRA_CLOBBERS);	\
+			__ret = (rettype)__eax;				\
+		}							\
+		__ret;							\
+	})
+#define __PVOP_VCALL(op, pre, post, ...)				\
+	({								\
+		PVOP_VCALL_ARGS;					\
+		PVOP_TEST_NULL(op);					\
+		asm volatile(pre					\
+			     paravirt_alt(PARAVIRT_CALL)		\
+			     post					\
+			     : PVOP_VCALL_CLOBBERS			\
+			     : paravirt_type(op),			\
+			       paravirt_clobber(CLBR_ANY),		\
+			       ##__VA_ARGS__				\
+			     : "memory", "cc" VEXTRA_CLOBBERS);		\
+	})
+
+#define PVOP_CALL0(rettype, op)						\
+	__PVOP_CALL(rettype, op, "", "")
+#define PVOP_VCALL0(op)							\
+	__PVOP_VCALL(op, "", "")
+
+#define PVOP_CALL1(rettype, op, arg1)					\
+	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)))
+#define PVOP_VCALL1(op, arg1)						\
+	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)))
+
+#define PVOP_CALL2(rettype, op, arg1, arg2)				\
+	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)), 	\
+	"1" ((unsigned long)(arg2)))
+#define PVOP_VCALL2(op, arg1, arg2)					\
+	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)), 		\
+	"1" ((unsigned long)(arg2)))
+
+#define PVOP_CALL3(rettype, op, arg1, arg2, arg3)			\
+	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)),	\
+	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)))
+#define PVOP_VCALL3(op, arg1, arg2, arg3)				\
+	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)),		\
+	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)))
+
+/* This is the only difference in x86_64. We can make it much simpler */
+#ifdef CONFIG_X86_32
+#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
+	__PVOP_CALL(rettype, op,					\
+		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
+		    "0" ((u32)(arg1)), "1" ((u32)(arg2)),		\
+		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
+#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
+	__PVOP_VCALL(op,						\
+		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
+		    "0" ((u32)(arg1)), "1" ((u32)(arg2)),		\
+		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
+#else
+#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
+	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)),	\
+	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)),		\
+	"3"((unsigned long)(arg4)))
+#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
+	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)),		\
+	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)),		\
+	"3"((unsigned long)(arg4)))
+#endif
+
+static inline int paravirt_enabled(void)
+{
+	return pv_info.paravirt_enabled;
+}
+
+static inline void load_sp0(struct tss_struct *tss,
+			     struct thread_struct *thread)
+{
+	PVOP_VCALL2(pv_cpu_ops.load_sp0, tss, thread);
+}
+
+#define ARCH_SETUP			pv_init_ops.arch_setup();
+static inline unsigned long get_wallclock(void)
+{
+	return PVOP_CALL0(unsigned long, pv_time_ops.get_wallclock);
+}
+
+static inline int set_wallclock(unsigned long nowtime)
+{
+	return PVOP_CALL1(int, pv_time_ops.set_wallclock, nowtime);
+}
+
+static inline void (*choose_time_init(void))(void)
+{
+	return pv_time_ops.time_init;
+}
+
+/* The paravirtualized CPUID instruction. */
+static inline void __cpuid(unsigned int *eax, unsigned int *ebx,
+			   unsigned int *ecx, unsigned int *edx)
+{
+	PVOP_VCALL4(pv_cpu_ops.cpuid, eax, ebx, ecx, edx);
+}
+
+/*
+ * These special macros can be used to get or set a debugging register
+ */
+static inline unsigned long paravirt_get_debugreg(int reg)
+{
+	return PVOP_CALL1(unsigned long, pv_cpu_ops.get_debugreg, reg);
+}
+#define get_debugreg(var, reg) var = paravirt_get_debugreg(reg)
+static inline void set_debugreg(unsigned long val, int reg)
+{
+	PVOP_VCALL2(pv_cpu_ops.set_debugreg, reg, val);
+}
+
+static inline void clts(void)
+{
+	PVOP_VCALL0(pv_cpu_ops.clts);
+}
+
+static inline unsigned long read_cr0(void)
+{
+	return PVOP_CALL0(unsigned long, pv_cpu_ops.read_cr0);
+}
+
+static inline void write_cr0(unsigned long x)
+{
+	PVOP_VCALL1(pv_cpu_ops.write_cr0, x);
+}
+
+static inline unsigned long read_cr2(void)
+{
+	return PVOP_CALL0(unsigned long, pv_mmu_ops.read_cr2);
+}
+
+static inline void write_cr2(unsigned long x)
+{
+	PVOP_VCALL1(pv_mmu_ops.write_cr2, x);
+}
+
+static inline unsigned long read_cr3(void)
+{
+	return PVOP_CALL0(unsigned long, pv_mmu_ops.read_cr3);
+}
+
+static inline void write_cr3(unsigned long x)
+{
+	PVOP_VCALL1(pv_mmu_ops.write_cr3, x);
+}
+
+static inline unsigned long read_cr4(void)
+{
+	return PVOP_CALL0(unsigned long, pv_cpu_ops.read_cr4);
+}
+static inline unsigned long read_cr4_safe(void)
+{
+	return PVOP_CALL0(unsigned long, pv_cpu_ops.read_cr4_safe);
+}
+
+static inline void write_cr4(unsigned long x)
+{
+	PVOP_VCALL1(pv_cpu_ops.write_cr4, x);
+}
+
+#ifdef CONFIG_X86_64
+static inline unsigned long read_cr8(void)
+{
+	return PVOP_CALL0(unsigned long, pv_cpu_ops.read_cr8);
+}
+
+static inline void write_cr8(unsigned long x)
+{
+	PVOP_VCALL1(pv_cpu_ops.write_cr8, x);
+}
+#endif
+
+static inline void raw_safe_halt(void)
+{
+	PVOP_VCALL0(pv_irq_ops.safe_halt);
+}
+
+static inline void halt(void)
+{
+	PVOP_VCALL0(pv_irq_ops.safe_halt);
+}
+
+static inline void wbinvd(void)
+{
+	PVOP_VCALL0(pv_cpu_ops.wbinvd);
+}
+
+#define get_kernel_rpl()  (pv_info.kernel_rpl)
+
+static inline u64 paravirt_read_msr(unsigned msr, int *err)
+{
+	return PVOP_CALL2(u64, pv_cpu_ops.read_msr, msr, err);
+}
+static inline u64 paravirt_read_msr_amd(unsigned msr, int *err)
+{
+	return PVOP_CALL2(u64, pv_cpu_ops.read_msr_amd, msr, err);
+}
+static inline int paravirt_write_msr(unsigned msr, unsigned low, unsigned high)
+{
+	return PVOP_CALL3(int, pv_cpu_ops.write_msr, msr, low, high);
+}
+
+/* These should all do BUG_ON(_err), but our headers are too tangled. */
+#define rdmsr(msr, val1, val2)			\
+do {						\
+	int _err;				\
+	u64 _l = paravirt_read_msr(msr, &_err);	\
+	val1 = (u32)_l;				\
+	val2 = _l >> 32;			\
+} while (0)
+
+#define wrmsr(msr, val1, val2)			\
+do {						\
+	paravirt_write_msr(msr, val1, val2);	\
+} while (0)
+
+#define rdmsrl(msr, val)			\
+do {						\
+	int _err;				\
+	val = paravirt_read_msr(msr, &_err);	\
+} while (0)
+
+#define wrmsrl(msr, val)	wrmsr(msr, (u32)((u64)(val)), ((u64)(val))>>32)
+#define wrmsr_safe(msr, a, b)	paravirt_write_msr(msr, a, b)
+
+/* rdmsr with exception handling */
+#define rdmsr_safe(msr, a, b)			\
+({						\
+	int _err;				\
+	u64 _l = paravirt_read_msr(msr, &_err);	\
+	(*a) = (u32)_l;				\
+	(*b) = _l >> 32;			\
+	_err;					\
+})
+
+static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
+{
+	int err;
+
+	*p = paravirt_read_msr(msr, &err);
+	return err;
+}
+static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
+{
+	int err;
+
+	*p = paravirt_read_msr_amd(msr, &err);
+	return err;
+}
+
+static inline u64 paravirt_read_tsc(void)
+{
+	return PVOP_CALL0(u64, pv_cpu_ops.read_tsc);
+}
+
+#define rdtscl(low)				\
+do {						\
+	u64 _l = paravirt_read_tsc();		\
+	low = (int)_l;				\
+} while (0)
+
+#define rdtscll(val) (val = paravirt_read_tsc())
+
+static inline unsigned long long paravirt_sched_clock(void)
+{
+	return PVOP_CALL0(unsigned long long, pv_time_ops.sched_clock);
+}
+#define calibrate_tsc() (pv_time_ops.get_tsc_khz())
+
+static inline unsigned long long paravirt_read_pmc(int counter)
+{
+	return PVOP_CALL1(u64, pv_cpu_ops.read_pmc, counter);
+}
+
+#define rdpmc(counter, low, high)		\
+do {						\
+	u64 _l = paravirt_read_pmc(counter);	\
+	low = (u32)_l;				\
+	high = _l >> 32;			\
+} while (0)
+
+static inline unsigned long long paravirt_rdtscp(unsigned int *aux)
+{
+	return PVOP_CALL1(u64, pv_cpu_ops.read_tscp, aux);
+}
+
+#define rdtscp(low, high, aux)				\
+do {							\
+	int __aux;					\
+	unsigned long __val = paravirt_rdtscp(&__aux);	\
+	(low) = (u32)__val;				\
+	(high) = (u32)(__val >> 32);			\
+	(aux) = __aux;					\
+} while (0)
+
+#define rdtscpll(val, aux)				\
+do {							\
+	unsigned long __aux; 				\
+	val = paravirt_rdtscp(&__aux);			\
+	(aux) = __aux;					\
+} while (0)
+
+static inline void paravirt_alloc_ldt(struct desc_struct *ldt, unsigned entries)
+{
+	PVOP_VCALL2(pv_cpu_ops.alloc_ldt, ldt, entries);
+}
+
+static inline void paravirt_free_ldt(struct desc_struct *ldt, unsigned entries)
+{
+	PVOP_VCALL2(pv_cpu_ops.free_ldt, ldt, entries);
+}
+
+static inline void load_TR_desc(void)
+{
+	PVOP_VCALL0(pv_cpu_ops.load_tr_desc);
+}
+static inline void load_gdt(const struct desc_ptr *dtr)
+{
+	PVOP_VCALL1(pv_cpu_ops.load_gdt, dtr);
+}
+static inline void load_idt(const struct desc_ptr *dtr)
+{
+	PVOP_VCALL1(pv_cpu_ops.load_idt, dtr);
+}
+static inline void set_ldt(const void *addr, unsigned entries)
+{
+	PVOP_VCALL2(pv_cpu_ops.set_ldt, addr, entries);
+}
+static inline void store_gdt(struct desc_ptr *dtr)
+{
+	PVOP_VCALL1(pv_cpu_ops.store_gdt, dtr);
+}
+static inline void store_idt(struct desc_ptr *dtr)
+{
+	PVOP_VCALL1(pv_cpu_ops.store_idt, dtr);
+}
+static inline unsigned long paravirt_store_tr(void)
+{
+	return PVOP_CALL0(unsigned long, pv_cpu_ops.store_tr);
+}
+#define store_tr(tr)	((tr) = paravirt_store_tr())
+static inline void load_TLS(struct thread_struct *t, unsigned cpu)
+{
+	PVOP_VCALL2(pv_cpu_ops.load_tls, t, cpu);
+}
+
+#ifdef CONFIG_X86_64
+static inline void load_gs_index(unsigned int gs)
+{
+	PVOP_VCALL1(pv_cpu_ops.load_gs_index, gs);
+}
+#endif
+
+static inline void write_ldt_entry(struct desc_struct *dt, int entry,
+				   const void *desc)
+{
+	PVOP_VCALL3(pv_cpu_ops.write_ldt_entry, dt, entry, desc);
+}
+
+static inline void write_gdt_entry(struct desc_struct *dt, int entry,
+				   void *desc, int type)
+{
+	PVOP_VCALL4(pv_cpu_ops.write_gdt_entry, dt, entry, desc, type);
+}
+
+static inline void write_idt_entry(gate_desc *dt, int entry, const gate_desc *g)
+{
+	PVOP_VCALL3(pv_cpu_ops.write_idt_entry, dt, entry, g);
+}
+static inline void set_iopl_mask(unsigned mask)
+{
+	PVOP_VCALL1(pv_cpu_ops.set_iopl_mask, mask);
+}
+
+/* The paravirtualized I/O functions */
+static inline void slow_down_io(void)
+{
+	pv_cpu_ops.io_delay();
+#ifdef REALLY_SLOW_IO
+	pv_cpu_ops.io_delay();
+	pv_cpu_ops.io_delay();
+	pv_cpu_ops.io_delay();
+#endif
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static inline void setup_boot_clock(void)
+{
+	PVOP_VCALL0(pv_apic_ops.setup_boot_clock);
+}
+
+static inline void setup_secondary_clock(void)
+{
+	PVOP_VCALL0(pv_apic_ops.setup_secondary_clock);
+}
+#endif
+
+static inline void paravirt_post_allocator_init(void)
+{
+	if (pv_init_ops.post_allocator_init)
+		(*pv_init_ops.post_allocator_init)();
+}
+
+static inline void paravirt_pagetable_setup_start(pgd_t *base)
+{
+	(*pv_mmu_ops.pagetable_setup_start)(base);
+}
+
+static inline void paravirt_pagetable_setup_done(pgd_t *base)
+{
+	(*pv_mmu_ops.pagetable_setup_done)(base);
+}
+
+#ifdef CONFIG_SMP
+static inline void startup_ipi_hook(int phys_apicid, unsigned long start_eip,
+				    unsigned long start_esp)
+{
+	PVOP_VCALL3(pv_apic_ops.startup_ipi_hook,
+		    phys_apicid, start_eip, start_esp);
+}
+#endif
+
+static inline void paravirt_activate_mm(struct mm_struct *prev,
+					struct mm_struct *next)
+{
+	PVOP_VCALL2(pv_mmu_ops.activate_mm, prev, next);
+}
+
+static inline void arch_dup_mmap(struct mm_struct *oldmm,
+				 struct mm_struct *mm)
+{
+	PVOP_VCALL2(pv_mmu_ops.dup_mmap, oldmm, mm);
+}
+
+static inline void arch_exit_mmap(struct mm_struct *mm)
+{
+	PVOP_VCALL1(pv_mmu_ops.exit_mmap, mm);
+}
+
+static inline void __flush_tlb(void)
+{
+	PVOP_VCALL0(pv_mmu_ops.flush_tlb_user);
+}
+static inline void __flush_tlb_global(void)
+{
+	PVOP_VCALL0(pv_mmu_ops.flush_tlb_kernel);
+}
+static inline void __flush_tlb_single(unsigned long addr)
+{
+	PVOP_VCALL1(pv_mmu_ops.flush_tlb_single, addr);
+}
+
+static inline void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
+				    unsigned long va)
+{
+	PVOP_VCALL3(pv_mmu_ops.flush_tlb_others, &cpumask, mm, va);
+}
+
+static inline int paravirt_pgd_alloc(struct mm_struct *mm)
+{
+	return PVOP_CALL1(int, pv_mmu_ops.pgd_alloc, mm);
+}
+
+static inline void paravirt_pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	PVOP_VCALL2(pv_mmu_ops.pgd_free, mm, pgd);
+}
+
+static inline void paravirt_alloc_pte(struct mm_struct *mm, unsigned long pfn)
+{
+	PVOP_VCALL2(pv_mmu_ops.alloc_pte, mm, pfn);
+}
+static inline void paravirt_release_pte(unsigned long pfn)
+{
+	PVOP_VCALL1(pv_mmu_ops.release_pte, pfn);
+}
+
+static inline void paravirt_alloc_pmd(struct mm_struct *mm, unsigned long pfn)
+{
+	PVOP_VCALL2(pv_mmu_ops.alloc_pmd, mm, pfn);
+}
+
+static inline void paravirt_alloc_pmd_clone(unsigned long pfn, unsigned long clonepfn,
+					    unsigned long start, unsigned long count)
+{
+	PVOP_VCALL4(pv_mmu_ops.alloc_pmd_clone, pfn, clonepfn, start, count);
+}
+static inline void paravirt_release_pmd(unsigned long pfn)
+{
+	PVOP_VCALL1(pv_mmu_ops.release_pmd, pfn);
+}
+
+static inline void paravirt_alloc_pud(struct mm_struct *mm, unsigned long pfn)
+{
+	PVOP_VCALL2(pv_mmu_ops.alloc_pud, mm, pfn);
+}
+static inline void paravirt_release_pud(unsigned long pfn)
+{
+	PVOP_VCALL1(pv_mmu_ops.release_pud, pfn);
+}
+
+#ifdef CONFIG_HIGHPTE
+static inline void *kmap_atomic_pte(struct page *page, enum km_type type)
+{
+	unsigned long ret;
+	ret = PVOP_CALL2(unsigned long, pv_mmu_ops.kmap_atomic_pte, page, type);
+	return (void *)ret;
+}
+#endif
+
+static inline void pte_update(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep)
+{
+	PVOP_VCALL3(pv_mmu_ops.pte_update, mm, addr, ptep);
+}
+
+static inline void pte_update_defer(struct mm_struct *mm, unsigned long addr,
+				    pte_t *ptep)
+{
+	PVOP_VCALL3(pv_mmu_ops.pte_update_defer, mm, addr, ptep);
+}
+
+static inline pte_t __pte(pteval_t val)
+{
+	pteval_t ret;
+
+	if (sizeof(pteval_t) > sizeof(long))
+		ret = PVOP_CALL2(pteval_t,
+				 pv_mmu_ops.make_pte,
+				 val, (u64)val >> 32);
+	else
+		ret = PVOP_CALL1(pteval_t,
+				 pv_mmu_ops.make_pte,
+				 val);
+
+	return (pte_t) { .pte = ret };
+}
+
+static inline pteval_t pte_val(pte_t pte)
+{
+	pteval_t ret;
+
+	if (sizeof(pteval_t) > sizeof(long))
+		ret = PVOP_CALL2(pteval_t, pv_mmu_ops.pte_val,
+				 pte.pte, (u64)pte.pte >> 32);
+	else
+		ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_val,
+				 pte.pte);
+
+	return ret;
+}
+
+static inline pteval_t pte_flags(pte_t pte)
+{
+	pteval_t ret;
+
+	if (sizeof(pteval_t) > sizeof(long))
+		ret = PVOP_CALL2(pteval_t, pv_mmu_ops.pte_flags,
+				 pte.pte, (u64)pte.pte >> 32);
+	else
+		ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_flags,
+				 pte.pte);
+
+#ifdef CONFIG_PARAVIRT_DEBUG
+	BUG_ON(ret & PTE_PFN_MASK);
+#endif
+	return ret;
+}
+
+static inline pgd_t __pgd(pgdval_t val)
+{
+	pgdval_t ret;
+
+	if (sizeof(pgdval_t) > sizeof(long))
+		ret = PVOP_CALL2(pgdval_t, pv_mmu_ops.make_pgd,
+				 val, (u64)val >> 32);
+	else
+		ret = PVOP_CALL1(pgdval_t, pv_mmu_ops.make_pgd,
+				 val);
+
+	return (pgd_t) { ret };
+}
+
+static inline pgdval_t pgd_val(pgd_t pgd)
+{
+	pgdval_t ret;
+
+	if (sizeof(pgdval_t) > sizeof(long))
+		ret =  PVOP_CALL2(pgdval_t, pv_mmu_ops.pgd_val,
+				  pgd.pgd, (u64)pgd.pgd >> 32);
+	else
+		ret =  PVOP_CALL1(pgdval_t, pv_mmu_ops.pgd_val,
+				  pgd.pgd);
+
+	return ret;
+}
+
+#define  __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION
+static inline pte_t ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr,
+					   pte_t *ptep)
+{
+	pteval_t ret;
+
+	ret = PVOP_CALL3(pteval_t, pv_mmu_ops.ptep_modify_prot_start,
+			 mm, addr, ptep);
+
+	return (pte_t) { .pte = ret };
+}
+
+static inline void ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
+					   pte_t *ptep, pte_t pte)
+{
+	if (sizeof(pteval_t) > sizeof(long))
+		/* 5 arg words */
+		pv_mmu_ops.ptep_modify_prot_commit(mm, addr, ptep, pte);
+	else
+		PVOP_VCALL4(pv_mmu_ops.ptep_modify_prot_commit,
+			    mm, addr, ptep, pte.pte);
+}
+
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+	if (sizeof(pteval_t) > sizeof(long))
+		PVOP_VCALL3(pv_mmu_ops.set_pte, ptep,
+			    pte.pte, (u64)pte.pte >> 32);
+	else
+		PVOP_VCALL2(pv_mmu_ops.set_pte, ptep,
+			    pte.pte);
+}
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pte)
+{
+	if (sizeof(pteval_t) > sizeof(long))
+		/* 5 arg words */
+		pv_mmu_ops.set_pte_at(mm, addr, ptep, pte);
+	else
+		PVOP_VCALL4(pv_mmu_ops.set_pte_at, mm, addr, ptep, pte.pte);
+}
+
+static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
+{
+	pmdval_t val = native_pmd_val(pmd);
+
+	if (sizeof(pmdval_t) > sizeof(long))
+		PVOP_VCALL3(pv_mmu_ops.set_pmd, pmdp, val, (u64)val >> 32);
+	else
+		PVOP_VCALL2(pv_mmu_ops.set_pmd, pmdp, val);
+}
+
+#if PAGETABLE_LEVELS >= 3
+static inline pmd_t __pmd(pmdval_t val)
+{
+	pmdval_t ret;
+
+	if (sizeof(pmdval_t) > sizeof(long))
+		ret = PVOP_CALL2(pmdval_t, pv_mmu_ops.make_pmd,
+				 val, (u64)val >> 32);
+	else
+		ret = PVOP_CALL1(pmdval_t, pv_mmu_ops.make_pmd,
+				 val);
+
+	return (pmd_t) { ret };
+}
+
+static inline pmdval_t pmd_val(pmd_t pmd)
+{
+	pmdval_t ret;
+
+	if (sizeof(pmdval_t) > sizeof(long))
+		ret =  PVOP_CALL2(pmdval_t, pv_mmu_ops.pmd_val,
+				  pmd.pmd, (u64)pmd.pmd >> 32);
+	else
+		ret =  PVOP_CALL1(pmdval_t, pv_mmu_ops.pmd_val,
+				  pmd.pmd);
+
+	return ret;
+}
+
+static inline void set_pud(pud_t *pudp, pud_t pud)
+{
+	pudval_t val = native_pud_val(pud);
+
+	if (sizeof(pudval_t) > sizeof(long))
+		PVOP_VCALL3(pv_mmu_ops.set_pud, pudp,
+			    val, (u64)val >> 32);
+	else
+		PVOP_VCALL2(pv_mmu_ops.set_pud, pudp,
+			    val);
+}
+#if PAGETABLE_LEVELS == 4
+static inline pud_t __pud(pudval_t val)
+{
+	pudval_t ret;
+
+	if (sizeof(pudval_t) > sizeof(long))
+		ret = PVOP_CALL2(pudval_t, pv_mmu_ops.make_pud,
+				 val, (u64)val >> 32);
+	else
+		ret = PVOP_CALL1(pudval_t, pv_mmu_ops.make_pud,
+				 val);
+
+	return (pud_t) { ret };
+}
+
+static inline pudval_t pud_val(pud_t pud)
+{
+	pudval_t ret;
+
+	if (sizeof(pudval_t) > sizeof(long))
+		ret =  PVOP_CALL2(pudval_t, pv_mmu_ops.pud_val,
+				  pud.pud, (u64)pud.pud >> 32);
+	else
+		ret =  PVOP_CALL1(pudval_t, pv_mmu_ops.pud_val,
+				  pud.pud);
+
+	return ret;
+}
+
+static inline void set_pgd(pgd_t *pgdp, pgd_t pgd)
+{
+	pgdval_t val = native_pgd_val(pgd);
+
+	if (sizeof(pgdval_t) > sizeof(long))
+		PVOP_VCALL3(pv_mmu_ops.set_pgd, pgdp,
+			    val, (u64)val >> 32);
+	else
+		PVOP_VCALL2(pv_mmu_ops.set_pgd, pgdp,
+			    val);
+}
+
+static inline void pgd_clear(pgd_t *pgdp)
+{
+	set_pgd(pgdp, __pgd(0));
+}
+
+static inline void pud_clear(pud_t *pudp)
+{
+	set_pud(pudp, __pud(0));
+}
+
+#endif	/* PAGETABLE_LEVELS == 4 */
+
+#endif	/* PAGETABLE_LEVELS >= 3 */
+
+#ifdef CONFIG_X86_PAE
+/* Special-case pte-setting operations for PAE, which can't update a
+   64-bit pte atomically */
+static inline void set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+	PVOP_VCALL3(pv_mmu_ops.set_pte_atomic, ptep,
+		    pte.pte, pte.pte >> 32);
+}
+
+static inline void set_pte_present(struct mm_struct *mm, unsigned long addr,
+				   pte_t *ptep, pte_t pte)
+{
+	/* 5 arg words */
+	pv_mmu_ops.set_pte_present(mm, addr, ptep, pte);
+}
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
+			     pte_t *ptep)
+{
+	PVOP_VCALL3(pv_mmu_ops.pte_clear, mm, addr, ptep);
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	PVOP_VCALL1(pv_mmu_ops.pmd_clear, pmdp);
+}
+#else  /* !CONFIG_X86_PAE */
+static inline void set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+	set_pte(ptep, pte);
+}
+
+static inline void set_pte_present(struct mm_struct *mm, unsigned long addr,
+				   pte_t *ptep, pte_t pte)
+{
+	set_pte(ptep, pte);
+}
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
+			     pte_t *ptep)
+{
+	set_pte_at(mm, addr, ptep, __pte(0));
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	set_pmd(pmdp, __pmd(0));
+}
+#endif	/* CONFIG_X86_PAE */
+
+/* Lazy mode for batching updates / context switch */
+enum paravirt_lazy_mode {
+	PARAVIRT_LAZY_NONE,
+	PARAVIRT_LAZY_MMU,
+	PARAVIRT_LAZY_CPU,
+};
+
+enum paravirt_lazy_mode paravirt_get_lazy_mode(void);
+void paravirt_enter_lazy_cpu(void);
+void paravirt_leave_lazy_cpu(void);
+void paravirt_enter_lazy_mmu(void);
+void paravirt_leave_lazy_mmu(void);
+void paravirt_leave_lazy(enum paravirt_lazy_mode mode);
+
+#define  __HAVE_ARCH_ENTER_LAZY_CPU_MODE
+static inline void arch_enter_lazy_cpu_mode(void)
+{
+	PVOP_VCALL0(pv_cpu_ops.lazy_mode.enter);
+}
+
+static inline void arch_leave_lazy_cpu_mode(void)
+{
+	PVOP_VCALL0(pv_cpu_ops.lazy_mode.leave);
+}
+
+static inline void arch_flush_lazy_cpu_mode(void)
+{
+	if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU)) {
+		arch_leave_lazy_cpu_mode();
+		arch_enter_lazy_cpu_mode();
+	}
+}
+
+
+#define  __HAVE_ARCH_ENTER_LAZY_MMU_MODE
+static inline void arch_enter_lazy_mmu_mode(void)
+{
+	PVOP_VCALL0(pv_mmu_ops.lazy_mode.enter);
+}
+
+static inline void arch_leave_lazy_mmu_mode(void)
+{
+	PVOP_VCALL0(pv_mmu_ops.lazy_mode.leave);
+}
+
+static inline void arch_flush_lazy_mmu_mode(void)
+{
+	if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU)) {
+		arch_leave_lazy_mmu_mode();
+		arch_enter_lazy_mmu_mode();
+	}
+}
+
+static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
+				unsigned long phys, pgprot_t flags)
+{
+	pv_mmu_ops.set_fixmap(idx, phys, flags);
+}
+
+void _paravirt_nop(void);
+#define paravirt_nop	((void *)_paravirt_nop)
+
+void paravirt_use_bytelocks(void);
+
+#ifdef CONFIG_SMP
+
+static inline int __raw_spin_is_locked(struct raw_spinlock *lock)
+{
+	return PVOP_CALL1(int, pv_lock_ops.spin_is_locked, lock);
+}
+
+static inline int __raw_spin_is_contended(struct raw_spinlock *lock)
+{
+	return PVOP_CALL1(int, pv_lock_ops.spin_is_contended, lock);
+}
+
+static __always_inline void __raw_spin_lock(struct raw_spinlock *lock)
+{
+	PVOP_VCALL1(pv_lock_ops.spin_lock, lock);
+}
+
+static __always_inline void __raw_spin_lock_flags(struct raw_spinlock *lock,
+						  unsigned long flags)
+{
+	PVOP_VCALL2(pv_lock_ops.spin_lock_flags, lock, flags);
+}
+
+static __always_inline int __raw_spin_trylock(struct raw_spinlock *lock)
+{
+	return PVOP_CALL1(int, pv_lock_ops.spin_trylock, lock);
+}
+
+static __always_inline void __raw_spin_unlock(struct raw_spinlock *lock)
+{
+	PVOP_VCALL1(pv_lock_ops.spin_unlock, lock);
+}
+
+#endif
+
+/* These all sit in the .parainstructions section to tell us what to patch. */
+struct paravirt_patch_site {
+	u8 *instr; 		/* original instructions */
+	u8 instrtype;		/* type of this instruction */
+	u8 len;			/* length of original instruction */
+	u16 clobbers;		/* what registers you may clobber */
+};
+
+extern struct paravirt_patch_site __parainstructions[],
+	__parainstructions_end[];
+
+#ifdef CONFIG_X86_32
+#define PV_SAVE_REGS "pushl %%ecx; pushl %%edx;"
+#define PV_RESTORE_REGS "popl %%edx; popl %%ecx"
+#define PV_FLAGS_ARG "0"
+#define PV_EXTRA_CLOBBERS
+#define PV_VEXTRA_CLOBBERS
+#else
+/* We save some registers, but all of them, that's too much. We clobber all
+ * caller saved registers but the argument parameter */
+#define PV_SAVE_REGS "pushq %%rdi;"
+#define PV_RESTORE_REGS "popq %%rdi;"
+#define PV_EXTRA_CLOBBERS EXTRA_CLOBBERS, "rcx" , "rdx", "rsi"
+#define PV_VEXTRA_CLOBBERS EXTRA_CLOBBERS, "rdi", "rcx" , "rdx", "rsi"
+#define PV_FLAGS_ARG "D"
+#endif
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	unsigned long f;
+
+	asm volatile(paravirt_alt(PV_SAVE_REGS
+				  PARAVIRT_CALL
+				  PV_RESTORE_REGS)
+		     : "=a"(f)
+		     : paravirt_type(pv_irq_ops.save_fl),
+		       paravirt_clobber(CLBR_EAX)
+		     : "memory", "cc" PV_VEXTRA_CLOBBERS);
+	return f;
+}
+
+static inline void raw_local_irq_restore(unsigned long f)
+{
+	asm volatile(paravirt_alt(PV_SAVE_REGS
+				  PARAVIRT_CALL
+				  PV_RESTORE_REGS)
+		     : "=a"(f)
+		     : PV_FLAGS_ARG(f),
+		       paravirt_type(pv_irq_ops.restore_fl),
+		       paravirt_clobber(CLBR_EAX)
+		     : "memory", "cc" PV_EXTRA_CLOBBERS);
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	asm volatile(paravirt_alt(PV_SAVE_REGS
+				  PARAVIRT_CALL
+				  PV_RESTORE_REGS)
+		     :
+		     : paravirt_type(pv_irq_ops.irq_disable),
+		       paravirt_clobber(CLBR_EAX)
+		     : "memory", "eax", "cc" PV_EXTRA_CLOBBERS);
+}
+
+static inline void raw_local_irq_enable(void)
+{
+	asm volatile(paravirt_alt(PV_SAVE_REGS
+				  PARAVIRT_CALL
+				  PV_RESTORE_REGS)
+		     :
+		     : paravirt_type(pv_irq_ops.irq_enable),
+		       paravirt_clobber(CLBR_EAX)
+		     : "memory", "eax", "cc" PV_EXTRA_CLOBBERS);
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long f;
+
+	f = __raw_local_save_flags();
+	raw_local_irq_disable();
+	return f;
+}
+
+
+/* Make sure as little as possible of this mess escapes. */
+#undef PARAVIRT_CALL
+#undef __PVOP_CALL
+#undef __PVOP_VCALL
+#undef PVOP_VCALL0
+#undef PVOP_CALL0
+#undef PVOP_VCALL1
+#undef PVOP_CALL1
+#undef PVOP_VCALL2
+#undef PVOP_CALL2
+#undef PVOP_VCALL3
+#undef PVOP_CALL3
+#undef PVOP_VCALL4
+#undef PVOP_CALL4
+
+#else  /* __ASSEMBLY__ */
+
+#define _PVSITE(ptype, clobbers, ops, word, algn)	\
+771:;						\
+	ops;					\
+772:;						\
+	.pushsection .parainstructions,"a";	\
+	 .align	algn;				\
+	 word 771b;				\
+	 .byte ptype;				\
+	 .byte 772b-771b;			\
+	 .short clobbers;			\
+	.popsection
+
+
+#ifdef CONFIG_X86_64
+#define PV_SAVE_REGS				\
+	push %rax;				\
+	push %rcx;				\
+	push %rdx;				\
+	push %rsi;				\
+	push %rdi;				\
+	push %r8;				\
+	push %r9;				\
+	push %r10;				\
+	push %r11
+#define PV_RESTORE_REGS				\
+	pop %r11;				\
+	pop %r10;				\
+	pop %r9;				\
+	pop %r8;				\
+	pop %rdi;				\
+	pop %rsi;				\
+	pop %rdx;				\
+	pop %rcx;				\
+	pop %rax
+#define PARA_PATCH(struct, off)        ((PARAVIRT_PATCH_##struct + (off)) / 8)
+#define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .quad, 8)
+#define PARA_INDIRECT(addr)	*addr(%rip)
+#else
+#define PV_SAVE_REGS   pushl %eax; pushl %edi; pushl %ecx; pushl %edx
+#define PV_RESTORE_REGS popl %edx; popl %ecx; popl %edi; popl %eax
+#define PARA_PATCH(struct, off)        ((PARAVIRT_PATCH_##struct + (off)) / 4)
+#define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .long, 4)
+#define PARA_INDIRECT(addr)	*%cs:addr
+#endif
+
+#define INTERRUPT_RETURN						\
+	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_iret), CLBR_NONE,	\
+		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_iret))
+
+#define DISABLE_INTERRUPTS(clobbers)					\
+	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_disable), clobbers, \
+		  PV_SAVE_REGS;						\
+		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_disable);	\
+		  PV_RESTORE_REGS;)			\
+
+#define ENABLE_INTERRUPTS(clobbers)					\
+	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_enable), clobbers,	\
+		  PV_SAVE_REGS;						\
+		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_enable);	\
+		  PV_RESTORE_REGS;)
+
+#define USERGS_SYSRET32							\
+	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret32),	\
+		  CLBR_NONE,						\
+		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_usergs_sysret32))
+
+#ifdef CONFIG_X86_32
+#define GET_CR0_INTO_EAX				\
+	push %ecx; push %edx;				\
+	call PARA_INDIRECT(pv_cpu_ops+PV_CPU_read_cr0);	\
+	pop %edx; pop %ecx
+
+#define ENABLE_INTERRUPTS_SYSEXIT					\
+	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_irq_enable_sysexit),	\
+		  CLBR_NONE,						\
+		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_irq_enable_sysexit))
+
+
+#else	/* !CONFIG_X86_32 */
+
+/*
+ * If swapgs is used while the userspace stack is still current,
+ * there's no way to call a pvop.  The PV replacement *must* be
+ * inlined, or the swapgs instruction must be trapped and emulated.
+ */
+#define SWAPGS_UNSAFE_STACK						\
+	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE,	\
+		  swapgs)
+
+#define SWAPGS								\
+	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE,	\
+		  PV_SAVE_REGS;						\
+		  call PARA_INDIRECT(pv_cpu_ops+PV_CPU_swapgs);		\
+		  PV_RESTORE_REGS					\
+		 )
+
+#define GET_CR2_INTO_RCX				\
+	call PARA_INDIRECT(pv_mmu_ops+PV_MMU_read_cr2);	\
+	movq %rax, %rcx;				\
+	xorq %rax, %rax;
+
+#define PARAVIRT_ADJUST_EXCEPTION_FRAME					\
+	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_adjust_exception_frame), \
+		  CLBR_NONE,						\
+		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_adjust_exception_frame))
+
+#define USERGS_SYSRET64							\
+	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret64),	\
+		  CLBR_NONE,						\
+		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_usergs_sysret64))
+
+#define ENABLE_INTERRUPTS_SYSEXIT32					\
+	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_irq_enable_sysexit),	\
+		  CLBR_NONE,						\
+		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_irq_enable_sysexit))
+#endif	/* CONFIG_X86_32 */
+
+#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_PARAVIRT */
+#endif /* _ASM_X86_PARAVIRT_H */
diff --git a/arch/x86/include/asm/parport.h b/arch/x86/include/asm/parport.h
new file mode 100644
index 0000000..3c4ffeb
--- /dev/null
+++ b/arch/x86/include/asm/parport.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_X86_PARPORT_H
+#define _ASM_X86_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports(autoirq, autodma);
+}
+
+#endif /* _ASM_X86_PARPORT_H */
diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h
new file mode 100644
index 0000000..b8493b3
--- /dev/null
+++ b/arch/x86/include/asm/pat.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_X86_PAT_H
+#define _ASM_X86_PAT_H
+
+#include <linux/types.h>
+
+#ifdef CONFIG_X86_PAT
+extern int pat_enabled;
+extern void validate_pat_support(struct cpuinfo_x86 *c);
+#else
+static const int pat_enabled;
+static inline void validate_pat_support(struct cpuinfo_x86 *c) { }
+#endif
+
+extern void pat_init(void);
+
+extern int reserve_memtype(u64 start, u64 end,
+		unsigned long req_type, unsigned long *ret_type);
+extern int free_memtype(u64 start, u64 end);
+
+extern void pat_disable(char *reason);
+
+#endif /* _ASM_X86_PAT_H */
diff --git a/arch/x86/include/asm/pci-direct.h b/arch/x86/include/asm/pci-direct.h
new file mode 100644
index 0000000..b1e7a45
--- /dev/null
+++ b/arch/x86/include/asm/pci-direct.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_X86_PCI_DIRECT_H
+#define _ASM_X86_PCI_DIRECT_H
+
+#include <linux/types.h>
+
+/* Direct PCI access. This is used for PCI accesses in early boot before
+   the PCI subsystem works. */
+
+extern u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset);
+extern u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset);
+extern u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset);
+extern void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, u32 val);
+extern void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val);
+extern void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val);
+
+extern int early_pci_allowed(void);
+
+extern unsigned int pci_early_dump_regs;
+extern void early_dump_pci_device(u8 bus, u8 slot, u8 func);
+extern void early_dump_pci_devices(void);
+#endif /* _ASM_X86_PCI_DIRECT_H */
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
new file mode 100644
index 0000000..875b38e
--- /dev/null
+++ b/arch/x86/include/asm/pci.h
@@ -0,0 +1,114 @@
+#ifndef _ASM_X86_PCI_H
+#define _ASM_X86_PCI_H
+
+#include <linux/mm.h> /* for struct page */
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+
+#ifdef __KERNEL__
+
+struct pci_sysdata {
+	int		domain;		/* PCI domain */
+	int		node;		/* NUMA node */
+#ifdef CONFIG_X86_64
+	void		*iommu;		/* IOMMU private data */
+#endif
+};
+
+extern int pci_routeirq;
+
+/* scan a bus after allocating a pci_sysdata for it */
+extern struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops,
+					    int node);
+extern struct pci_bus *pci_scan_bus_with_sysdata(int busno);
+
+static inline int pci_domain_nr(struct pci_bus *bus)
+{
+	struct pci_sysdata *sd = bus->sysdata;
+	return sd->domain;
+}
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return pci_domain_nr(bus);
+}
+
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+   already-configured bus numbers - to be used for buggy BIOSes
+   or architectures with incomplete PCI setup by the loader */
+
+#ifdef CONFIG_PCI
+extern unsigned int pcibios_assign_all_busses(void);
+#else
+#define pcibios_assign_all_busses()	0
+#endif
+#define pcibios_scan_all_fns(a, b)	0
+
+extern unsigned long pci_mem_start;
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		(pci_mem_start)
+
+#define PCIBIOS_MIN_CARDBUS_IO	0x4000
+
+void pcibios_config_init(void);
+struct pci_bus *pcibios_scan_root(int bus);
+
+void pcibios_set_master(struct pci_dev *dev);
+void pcibios_penalize_isa_irq(int irq, int active);
+struct irq_routing_table *pcibios_get_irq_routing_table(void);
+int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
+
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			       enum pci_mmap_state mmap_state,
+			       int write_combine);
+
+
+#ifdef CONFIG_PCI
+extern void early_quirks(void);
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#else
+static inline void early_quirks(void) { }
+#endif
+
+#endif  /* __KERNEL__ */
+
+#ifdef CONFIG_X86_32
+# include "pci_32.h"
+#else
+# include "pci_64.h"
+#endif
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+#ifdef CONFIG_NUMA
+/* Returns the node based on pci bus */
+static inline int __pcibus_to_node(struct pci_bus *bus)
+{
+	struct pci_sysdata *sd = bus->sysdata;
+
+	return sd->node;
+}
+
+static inline cpumask_t __pcibus_to_cpumask(struct pci_bus *bus)
+{
+	return node_to_cpumask(__pcibus_to_node(bus));
+}
+#endif
+
+#endif /* _ASM_X86_PCI_H */
diff --git a/arch/x86/include/asm/pci_32.h b/arch/x86/include/asm/pci_32.h
new file mode 100644
index 0000000..6f1213a
--- /dev/null
+++ b/arch/x86/include/asm/pci_32.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_X86_PCI_32_H
+#define _ASM_X86_PCI_32_H
+
+
+#ifdef __KERNEL__
+
+
+/* Dynamic DMA mapping stuff.
+ * i386 has everything mapped statically.
+ */
+
+struct pci_dev;
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME[0];
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)	unsigned LEN_NAME[0];
+#define pci_unmap_addr(PTR, ADDR_NAME)	sizeof((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
+	do { break; } while (pci_unmap_addr(PTR, ADDR_NAME))
+#define pci_unmap_len(PTR, LEN_NAME)		sizeof((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
+	do { break; } while (pci_unmap_len(PTR, LEN_NAME))
+
+
+#endif /* __KERNEL__ */
+
+
+#endif /* _ASM_X86_PCI_32_H */
diff --git a/arch/x86/include/asm/pci_64.h b/arch/x86/include/asm/pci_64.h
new file mode 100644
index 0000000..5b28995
--- /dev/null
+++ b/arch/x86/include/asm/pci_64.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_X86_PCI_64_H
+#define _ASM_X86_PCI_64_H
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_CALGARY_IOMMU
+static inline void *pci_iommu(struct pci_bus *bus)
+{
+	struct pci_sysdata *sd = bus->sysdata;
+	return sd->iommu;
+}
+
+static inline void set_pci_iommu(struct pci_bus *bus, void *val)
+{
+	struct pci_sysdata *sd = bus->sysdata;
+	sd->iommu = val;
+}
+#endif /* CONFIG_CALGARY_IOMMU */
+
+extern int (*pci_config_read)(int seg, int bus, int dev, int fn,
+			      int reg, int len, u32 *value);
+extern int (*pci_config_write)(int seg, int bus, int dev, int fn,
+			       int reg, int len, u32 value);
+
+extern void dma32_reserve_bootmem(void);
+extern void pci_iommu_alloc(void);
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions
+ *
+ * On AMD64 it mostly equals, but we set it to zero if a hardware
+ * IOMMU (gart) of sotware IOMMU (swiotlb) is available.
+ */
+#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
+
+#if defined(CONFIG_GART_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
+
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+#else
+/* No IOMMU */
+
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_PCI_64_H */
diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
new file mode 100644
index 0000000..2fbfff8
--- /dev/null
+++ b/arch/x86/include/asm/pda.h
@@ -0,0 +1,137 @@
+#ifndef _ASM_X86_PDA_H
+#define _ASM_X86_PDA_H
+
+#ifndef __ASSEMBLY__
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/cache.h>
+#include <asm/page.h>
+
+/* Per processor datastructure. %gs points to it while the kernel runs */
+struct x8664_pda {
+	struct task_struct *pcurrent;	/* 0  Current process */
+	unsigned long data_offset;	/* 8 Per cpu data offset from linker
+					   address */
+	unsigned long kernelstack;	/* 16 top of kernel stack for current */
+	unsigned long oldrsp;		/* 24 user rsp for system call */
+	int irqcount;			/* 32 Irq nesting counter. Starts -1 */
+	unsigned int cpunumber;		/* 36 Logical CPU number */
+#ifdef CONFIG_CC_STACKPROTECTOR
+	unsigned long stack_canary;	/* 40 stack canary value */
+					/* gcc-ABI: this canary MUST be at
+					   offset 40!!! */
+#endif
+	char *irqstackptr;
+	short nodenumber;		/* number of current node (32k max) */
+	short in_bootmem;		/* pda lives in bootmem */
+	unsigned int __softirq_pending;
+	unsigned int __nmi_count;	/* number of NMI on this CPUs */
+	short mmu_state;
+	short isidle;
+	struct mm_struct *active_mm;
+	unsigned apic_timer_irqs;
+	unsigned irq0_irqs;
+	unsigned irq_resched_count;
+	unsigned irq_call_count;
+	unsigned irq_tlb_count;
+	unsigned irq_thermal_count;
+	unsigned irq_threshold_count;
+	unsigned irq_spurious_count;
+} ____cacheline_aligned_in_smp;
+
+extern struct x8664_pda **_cpu_pda;
+extern void pda_init(int);
+
+#define cpu_pda(i) (_cpu_pda[i])
+
+/*
+ * There is no fast way to get the base address of the PDA, all the accesses
+ * have to mention %fs/%gs.  So it needs to be done this Torvaldian way.
+ */
+extern void __bad_pda_field(void) __attribute__((noreturn));
+
+/*
+ * proxy_pda doesn't actually exist, but tell gcc it is accessed for
+ * all PDA accesses so it gets read/write dependencies right.
+ */
+extern struct x8664_pda _proxy_pda;
+
+#define pda_offset(field) offsetof(struct x8664_pda, field)
+
+#define pda_to_op(op, field, val)					\
+do {									\
+	typedef typeof(_proxy_pda.field) T__;				\
+	if (0) { T__ tmp__; tmp__ = (val); }	/* type checking */	\
+	switch (sizeof(_proxy_pda.field)) {				\
+	case 2:								\
+		asm(op "w %1,%%gs:%c2" :				\
+		    "+m" (_proxy_pda.field) :				\
+		    "ri" ((T__)val),					\
+		    "i"(pda_offset(field)));				\
+		break;							\
+	case 4:								\
+		asm(op "l %1,%%gs:%c2" :				\
+		    "+m" (_proxy_pda.field) :				\
+		    "ri" ((T__)val),					\
+		    "i" (pda_offset(field)));				\
+		break;							\
+	case 8:								\
+		asm(op "q %1,%%gs:%c2":					\
+		    "+m" (_proxy_pda.field) :				\
+		    "ri" ((T__)val),					\
+		    "i"(pda_offset(field)));				\
+		break;							\
+	default:							\
+		__bad_pda_field();					\
+	}								\
+} while (0)
+
+#define pda_from_op(op, field)			\
+({						\
+	typeof(_proxy_pda.field) ret__;		\
+	switch (sizeof(_proxy_pda.field)) {	\
+	case 2:					\
+		asm(op "w %%gs:%c1,%0" :	\
+		    "=r" (ret__) :		\
+		    "i" (pda_offset(field)),	\
+		    "m" (_proxy_pda.field));	\
+		break;				\
+	case 4:					\
+		asm(op "l %%gs:%c1,%0":		\
+		    "=r" (ret__):		\
+		    "i" (pda_offset(field)),	\
+		    "m" (_proxy_pda.field));	\
+		break;				\
+	case 8:					\
+		asm(op "q %%gs:%c1,%0":		\
+		    "=r" (ret__) :		\
+		    "i" (pda_offset(field)),	\
+		    "m" (_proxy_pda.field));	\
+		break;				\
+	default:				\
+		__bad_pda_field();		\
+	}					\
+	ret__;					\
+})
+
+#define read_pda(field)		pda_from_op("mov", field)
+#define write_pda(field, val)	pda_to_op("mov", field, val)
+#define add_pda(field, val)	pda_to_op("add", field, val)
+#define sub_pda(field, val)	pda_to_op("sub", field, val)
+#define or_pda(field, val)	pda_to_op("or", field, val)
+
+/* This is not atomic against other CPUs -- CPU preemption needs to be off */
+#define test_and_clear_bit_pda(bit, field)				\
+({									\
+	int old__;							\
+	asm volatile("btr %2,%%gs:%c3\n\tsbbl %0,%0"			\
+		     : "=r" (old__), "+m" (_proxy_pda.field)		\
+		     : "dIr" (bit), "i" (pda_offset(field)) : "memory");\
+	old__;								\
+})
+
+#endif
+
+#define PDA_STACKOFFSET (5*8)
+
+#endif /* _ASM_X86_PDA_H */
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
new file mode 100644
index 0000000..ece7205
--- /dev/null
+++ b/arch/x86/include/asm/percpu.h
@@ -0,0 +1,218 @@
+#ifndef _ASM_X86_PERCPU_H
+#define _ASM_X86_PERCPU_H
+
+#ifdef CONFIG_X86_64
+#include <linux/compiler.h>
+
+/* Same as asm-generic/percpu.h, except that we store the per cpu offset
+   in the PDA. Longer term the PDA and every per cpu variable
+   should be just put into a single section and referenced directly
+   from %gs */
+
+#ifdef CONFIG_SMP
+#include <asm/pda.h>
+
+#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
+#define __my_cpu_offset read_pda(data_offset)
+
+#define per_cpu_offset(x) (__per_cpu_offset(x))
+
+#endif
+#include <asm-generic/percpu.h>
+
+DECLARE_PER_CPU(struct x8664_pda, pda);
+
+/*
+ * These are supposed to be implemented as a single instruction which
+ * operates on the per-cpu data base segment.  x86-64 doesn't have
+ * that yet, so this is a fairly inefficient workaround for the
+ * meantime.  The single instruction is atomic with respect to
+ * preemption and interrupts, so we need to explicitly disable
+ * interrupts here to achieve the same effect.  However, because it
+ * can be used from within interrupt-disable/enable, we can't actually
+ * disable interrupts; disabling preemption is enough.
+ */
+#define x86_read_percpu(var)						\
+	({								\
+		typeof(per_cpu_var(var)) __tmp;				\
+		preempt_disable();					\
+		__tmp = __get_cpu_var(var);				\
+		preempt_enable();					\
+		__tmp;							\
+	})
+
+#define x86_write_percpu(var, val)					\
+	do {								\
+		preempt_disable();					\
+		__get_cpu_var(var) = (val);				\
+		preempt_enable();					\
+	} while(0)
+
+#else /* CONFIG_X86_64 */
+
+#ifdef __ASSEMBLY__
+
+/*
+ * PER_CPU finds an address of a per-cpu variable.
+ *
+ * Args:
+ *    var - variable name
+ *    reg - 32bit register
+ *
+ * The resulting address is stored in the "reg" argument.
+ *
+ * Example:
+ *    PER_CPU(cpu_gdt_descr, %ebx)
+ */
+#ifdef CONFIG_SMP
+#define PER_CPU(var, reg)				\
+	movl %fs:per_cpu__##this_cpu_off, reg;		\
+	lea per_cpu__##var(reg), reg
+#define PER_CPU_VAR(var)	%fs:per_cpu__##var
+#else /* ! SMP */
+#define PER_CPU(var, reg)			\
+	movl $per_cpu__##var, reg
+#define PER_CPU_VAR(var)	per_cpu__##var
+#endif	/* SMP */
+
+#else /* ...!ASSEMBLY */
+
+/*
+ * PER_CPU finds an address of a per-cpu variable.
+ *
+ * Args:
+ *    var - variable name
+ *    cpu - 32bit register containing the current CPU number
+ *
+ * The resulting address is stored in the "cpu" argument.
+ *
+ * Example:
+ *    PER_CPU(cpu_gdt_descr, %ebx)
+ */
+#ifdef CONFIG_SMP
+
+#define __my_cpu_offset x86_read_percpu(this_cpu_off)
+
+/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
+#define __percpu_seg "%%fs:"
+
+#else  /* !SMP */
+
+#define __percpu_seg ""
+
+#endif	/* SMP */
+
+#include <asm-generic/percpu.h>
+
+/* We can use this directly for local CPU (faster). */
+DECLARE_PER_CPU(unsigned long, this_cpu_off);
+
+/* For arch-specific code, we can use direct single-insn ops (they
+ * don't give an lvalue though). */
+extern void __bad_percpu_size(void);
+
+#define percpu_to_op(op, var, val)			\
+do {							\
+	typedef typeof(var) T__;			\
+	if (0) {					\
+		T__ tmp__;				\
+		tmp__ = (val);				\
+	}						\
+	switch (sizeof(var)) {				\
+	case 1:						\
+		asm(op "b %1,"__percpu_seg"%0"		\
+		    : "+m" (var)			\
+		    : "ri" ((T__)val));			\
+		break;					\
+	case 2:						\
+		asm(op "w %1,"__percpu_seg"%0"		\
+		    : "+m" (var)			\
+		    : "ri" ((T__)val));			\
+		break;					\
+	case 4:						\
+		asm(op "l %1,"__percpu_seg"%0"		\
+		    : "+m" (var)			\
+		    : "ri" ((T__)val));			\
+		break;					\
+	default: __bad_percpu_size();			\
+	}						\
+} while (0)
+
+#define percpu_from_op(op, var)				\
+({							\
+	typeof(var) ret__;				\
+	switch (sizeof(var)) {				\
+	case 1:						\
+		asm(op "b "__percpu_seg"%1,%0"		\
+		    : "=r" (ret__)			\
+		    : "m" (var));			\
+		break;					\
+	case 2:						\
+		asm(op "w "__percpu_seg"%1,%0"		\
+		    : "=r" (ret__)			\
+		    : "m" (var));			\
+		break;					\
+	case 4:						\
+		asm(op "l "__percpu_seg"%1,%0"		\
+		    : "=r" (ret__)			\
+		    : "m" (var));			\
+		break;					\
+	default: __bad_percpu_size();			\
+	}						\
+	ret__;						\
+})
+
+#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
+#define x86_write_percpu(var, val) percpu_to_op("mov", per_cpu__##var, val)
+#define x86_add_percpu(var, val) percpu_to_op("add", per_cpu__##var, val)
+#define x86_sub_percpu(var, val) percpu_to_op("sub", per_cpu__##var, val)
+#define x86_or_percpu(var, val) percpu_to_op("or", per_cpu__##var, val)
+#endif /* !__ASSEMBLY__ */
+#endif /* !CONFIG_X86_64 */
+
+#ifdef CONFIG_SMP
+
+/*
+ * Define the "EARLY_PER_CPU" macros.  These are used for some per_cpu
+ * variables that are initialized and accessed before there are per_cpu
+ * areas allocated.
+ */
+
+#define	DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)			\
+	DEFINE_PER_CPU(_type, _name) = _initvalue;			\
+	__typeof__(_type) _name##_early_map[NR_CPUS] __initdata =	\
+				{ [0 ... NR_CPUS-1] = _initvalue };	\
+	__typeof__(_type) *_name##_early_ptr __refdata = _name##_early_map
+
+#define EXPORT_EARLY_PER_CPU_SYMBOL(_name)			\
+	EXPORT_PER_CPU_SYMBOL(_name)
+
+#define DECLARE_EARLY_PER_CPU(_type, _name)			\
+	DECLARE_PER_CPU(_type, _name);				\
+	extern __typeof__(_type) *_name##_early_ptr;		\
+	extern __typeof__(_type)  _name##_early_map[]
+
+#define	early_per_cpu_ptr(_name) (_name##_early_ptr)
+#define	early_per_cpu_map(_name, _idx) (_name##_early_map[_idx])
+#define	early_per_cpu(_name, _cpu) 				\
+	(early_per_cpu_ptr(_name) ?				\
+		early_per_cpu_ptr(_name)[_cpu] :		\
+		per_cpu(_name, _cpu))
+
+#else	/* !CONFIG_SMP */
+#define	DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)		\
+	DEFINE_PER_CPU(_type, _name) = _initvalue
+
+#define EXPORT_EARLY_PER_CPU_SYMBOL(_name)			\
+	EXPORT_PER_CPU_SYMBOL(_name)
+
+#define DECLARE_EARLY_PER_CPU(_type, _name)			\
+	DECLARE_PER_CPU(_type, _name)
+
+#define	early_per_cpu(_name, _cpu) per_cpu(_name, _cpu)
+#define	early_per_cpu_ptr(_name) NULL
+/* no early_per_cpu_map() */
+
+#endif	/* !CONFIG_SMP */
+
+#endif /* _ASM_X86_PERCPU_H */
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
new file mode 100644
index 0000000..cb7c151
--- /dev/null
+++ b/arch/x86/include/asm/pgalloc.h
@@ -0,0 +1,114 @@
+#ifndef _ASM_X86_PGALLOC_H
+#define _ASM_X86_PGALLOC_H
+
+#include <linux/threads.h>
+#include <linux/mm.h>		/* for struct page */
+#include <linux/pagemap.h>
+
+static inline int  __paravirt_pgd_alloc(struct mm_struct *mm) { return 0; }
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define paravirt_pgd_alloc(mm)	__paravirt_pgd_alloc(mm)
+static inline void paravirt_pgd_free(struct mm_struct *mm, pgd_t *pgd) {}
+static inline void paravirt_alloc_pte(struct mm_struct *mm, unsigned long pfn)	{}
+static inline void paravirt_alloc_pmd(struct mm_struct *mm, unsigned long pfn)	{}
+static inline void paravirt_alloc_pmd_clone(unsigned long pfn, unsigned long clonepfn,
+					    unsigned long start, unsigned long count) {}
+static inline void paravirt_alloc_pud(struct mm_struct *mm, unsigned long pfn)	{}
+static inline void paravirt_release_pte(unsigned long pfn) {}
+static inline void paravirt_release_pmd(unsigned long pfn) {}
+static inline void paravirt_release_pud(unsigned long pfn) {}
+#endif
+
+/*
+ * Allocate and free page tables.
+ */
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long);
+
+/* Should really implement gc for free page table pages. This could be
+   done with a reference count in struct page. */
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	BUG_ON((unsigned long)pte & (PAGE_SIZE-1));
+	free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, struct page *pte)
+{
+	__free_page(pte);
+}
+
+extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+
+static inline void pmd_populate_kernel(struct mm_struct *mm,
+				       pmd_t *pmd, pte_t *pte)
+{
+	paravirt_alloc_pte(mm, __pa(pte) >> PAGE_SHIFT);
+	set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+				struct page *pte)
+{
+	unsigned long pfn = page_to_pfn(pte);
+
+	paravirt_alloc_pte(mm, pfn);
+	set_pmd(pmd, __pmd(((pteval_t)pfn << PAGE_SHIFT) | _PAGE_TABLE));
+}
+
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+#if PAGETABLE_LEVELS > 2
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return (pmd_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	BUG_ON((unsigned long)pmd & (PAGE_SIZE-1));
+	free_page((unsigned long)pmd);
+}
+
+extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+
+#ifdef CONFIG_X86_PAE
+extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
+#else	/* !CONFIG_X86_PAE */
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	paravirt_alloc_pmd(mm, __pa(pmd) >> PAGE_SHIFT);
+	set_pud(pud, __pud(_PAGE_TABLE | __pa(pmd)));
+}
+#endif	/* CONFIG_X86_PAE */
+
+#if PAGETABLE_LEVELS > 3
+static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
+{
+	paravirt_alloc_pud(mm, __pa(pud) >> PAGE_SHIFT);
+	set_pgd(pgd, __pgd(_PAGE_TABLE | __pa(pud)));
+}
+
+static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return (pud_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void pud_free(struct mm_struct *mm, pud_t *pud)
+{
+	BUG_ON((unsigned long)pud & (PAGE_SIZE-1));
+	free_page((unsigned long)pud);
+}
+
+extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+#endif	/* PAGETABLE_LEVELS > 3 */
+#endif	/* PAGETABLE_LEVELS > 2 */
+
+#endif /* _ASM_X86_PGALLOC_H */
diff --git a/arch/x86/include/asm/pgtable-2level-defs.h b/arch/x86/include/asm/pgtable-2level-defs.h
new file mode 100644
index 0000000..d77db89
--- /dev/null
+++ b/arch/x86/include/asm/pgtable-2level-defs.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_X86_PGTABLE_2LEVEL_DEFS_H
+#define _ASM_X86_PGTABLE_2LEVEL_DEFS_H
+
+#define SHARED_KERNEL_PMD	0
+
+/*
+ * traditional i386 two-level paging structure:
+ */
+
+#define PGDIR_SHIFT	22
+#define PTRS_PER_PGD	1024
+
+/*
+ * the i386 is two-level, so we don't really have any
+ * PMD directory physically.
+ */
+
+#define PTRS_PER_PTE	1024
+
+#endif /* _ASM_X86_PGTABLE_2LEVEL_DEFS_H */
diff --git a/arch/x86/include/asm/pgtable-2level.h b/arch/x86/include/asm/pgtable-2level.h
new file mode 100644
index 0000000..b17edfd
--- /dev/null
+++ b/arch/x86/include/asm/pgtable-2level.h
@@ -0,0 +1,79 @@
+#ifndef _ASM_X86_PGTABLE_2LEVEL_H
+#define _ASM_X86_PGTABLE_2LEVEL_H
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte_low)
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+static inline void native_set_pte(pte_t *ptep , pte_t pte)
+{
+	*ptep = pte;
+}
+
+static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
+{
+	*pmdp = pmd;
+}
+
+static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+	native_set_pte(ptep, pte);
+}
+
+static inline void native_set_pte_present(struct mm_struct *mm,
+					  unsigned long addr,
+					  pte_t *ptep, pte_t pte)
+{
+	native_set_pte(ptep, pte);
+}
+
+static inline void native_pmd_clear(pmd_t *pmdp)
+{
+	native_set_pmd(pmdp, __pmd(0));
+}
+
+static inline void native_pte_clear(struct mm_struct *mm,
+				    unsigned long addr, pte_t *xp)
+{
+	*xp = native_make_pte(0);
+}
+
+#ifdef CONFIG_SMP
+static inline pte_t native_ptep_get_and_clear(pte_t *xp)
+{
+	return __pte(xchg(&xp->pte_low, 0));
+}
+#else
+#define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
+#endif
+
+#define pte_none(x)		(!(x).pte_low)
+
+/*
+ * Bits 0, 6 and 7 are taken, split up the 29 bits of offset
+ * into this range:
+ */
+#define PTE_FILE_MAX_BITS	29
+
+#define pte_to_pgoff(pte)						\
+	((((pte).pte_low >> 1) & 0x1f) + (((pte).pte_low >> 8) << 5))
+
+#define pgoff_to_pte(off)						\
+	((pte_t) { .pte_low = (((off) & 0x1f) << 1) +			\
+			(((off) >> 5) << 8) + _PAGE_FILE })
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x)			(((x).val >> 1) & 0x1f)
+#define __swp_offset(x)			((x).val >> 8)
+#define __swp_entry(type, offset)				\
+	((swp_entry_t) { ((type) << 1) | ((offset) << 8) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { (pte).pte_low })
+#define __swp_entry_to_pte(x)		((pte_t) { .pte = (x).val })
+
+#endif /* _ASM_X86_PGTABLE_2LEVEL_H */
diff --git a/arch/x86/include/asm/pgtable-3level-defs.h b/arch/x86/include/asm/pgtable-3level-defs.h
new file mode 100644
index 0000000..6256136
--- /dev/null
+++ b/arch/x86/include/asm/pgtable-3level-defs.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_X86_PGTABLE_3LEVEL_DEFS_H
+#define _ASM_X86_PGTABLE_3LEVEL_DEFS_H
+
+#ifdef CONFIG_PARAVIRT
+#define SHARED_KERNEL_PMD	(pv_info.shared_kernel_pmd)
+#else
+#define SHARED_KERNEL_PMD	1
+#endif
+
+/*
+ * PGDIR_SHIFT determines what a top-level page table entry can map
+ */
+#define PGDIR_SHIFT	30
+#define PTRS_PER_PGD	4
+
+/*
+ * PMD_SHIFT determines the size of the area a middle-level
+ * page table can map
+ */
+#define PMD_SHIFT	21
+#define PTRS_PER_PMD	512
+
+/*
+ * entries per page directory level
+ */
+#define PTRS_PER_PTE	512
+
+#endif /* _ASM_X86_PGTABLE_3LEVEL_DEFS_H */
diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
new file mode 100644
index 0000000..fb16cec
--- /dev/null
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -0,0 +1,175 @@
+#ifndef _ASM_X86_PGTABLE_3LEVEL_H
+#define _ASM_X86_PGTABLE_3LEVEL_H
+
+/*
+ * Intel Physical Address Extension (PAE) Mode - three-level page
+ * tables on PPro+ CPUs.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#define pte_ERROR(e)							\
+	printk("%s:%d: bad pte %p(%08lx%08lx).\n",			\
+	       __FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low)
+#define pmd_ERROR(e)							\
+	printk("%s:%d: bad pmd %p(%016Lx).\n",				\
+	       __FILE__, __LINE__, &(e), pmd_val(e))
+#define pgd_ERROR(e)							\
+	printk("%s:%d: bad pgd %p(%016Lx).\n",				\
+	       __FILE__, __LINE__, &(e), pgd_val(e))
+
+static inline int pud_none(pud_t pud)
+{
+	return pud_val(pud) == 0;
+}
+
+static inline int pud_bad(pud_t pud)
+{
+	return (pud_val(pud) & ~(PTE_PFN_MASK | _KERNPG_TABLE | _PAGE_USER)) != 0;
+}
+
+static inline int pud_present(pud_t pud)
+{
+	return pud_val(pud) & _PAGE_PRESENT;
+}
+
+/* Rules for using set_pte: the pte being assigned *must* be
+ * either not present or in a state where the hardware will
+ * not attempt to update the pte.  In places where this is
+ * not possible, use pte_get_and_clear to obtain the old pte
+ * value and then use set_pte to update it.  -ben
+ */
+static inline void native_set_pte(pte_t *ptep, pte_t pte)
+{
+	ptep->pte_high = pte.pte_high;
+	smp_wmb();
+	ptep->pte_low = pte.pte_low;
+}
+
+/*
+ * Since this is only called on user PTEs, and the page fault handler
+ * must handle the already racy situation of simultaneous page faults,
+ * we are justified in merely clearing the PTE present bit, followed
+ * by a set.  The ordering here is important.
+ */
+static inline void native_set_pte_present(struct mm_struct *mm,
+					  unsigned long addr,
+					  pte_t *ptep, pte_t pte)
+{
+	ptep->pte_low = 0;
+	smp_wmb();
+	ptep->pte_high = pte.pte_high;
+	smp_wmb();
+	ptep->pte_low = pte.pte_low;
+}
+
+static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+	set_64bit((unsigned long long *)(ptep), native_pte_val(pte));
+}
+
+static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
+{
+	set_64bit((unsigned long long *)(pmdp), native_pmd_val(pmd));
+}
+
+static inline void native_set_pud(pud_t *pudp, pud_t pud)
+{
+	set_64bit((unsigned long long *)(pudp), native_pud_val(pud));
+}
+
+/*
+ * For PTEs and PDEs, we must clear the P-bit first when clearing a page table
+ * entry, so clear the bottom half first and enforce ordering with a compiler
+ * barrier.
+ */
+static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr,
+				    pte_t *ptep)
+{
+	ptep->pte_low = 0;
+	smp_wmb();
+	ptep->pte_high = 0;
+}
+
+static inline void native_pmd_clear(pmd_t *pmd)
+{
+	u32 *tmp = (u32 *)pmd;
+	*tmp = 0;
+	smp_wmb();
+	*(tmp + 1) = 0;
+}
+
+static inline void pud_clear(pud_t *pudp)
+{
+	unsigned long pgd;
+
+	set_pud(pudp, __pud(0));
+
+	/*
+	 * According to Intel App note "TLBs, Paging-Structure Caches,
+	 * and Their Invalidation", April 2007, document 317080-001,
+	 * section 8.1: in PAE mode we explicitly have to flush the
+	 * TLB via cr3 if the top-level pgd is changed...
+	 *
+	 * Make sure the pud entry we're updating is within the
+	 * current pgd to avoid unnecessary TLB flushes.
+	 */
+	pgd = read_cr3();
+	if (__pa(pudp) >= pgd && __pa(pudp) <
+	    (pgd + sizeof(pgd_t)*PTRS_PER_PGD))
+		write_cr3(pgd);
+}
+
+#define pud_page(pud) ((struct page *) __va(pud_val(pud) & PTE_PFN_MASK))
+
+#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PTE_PFN_MASK))
+
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(pud, address) ((pmd_t *)pud_page(*(pud)) +	\
+				  pmd_index(address))
+
+#ifdef CONFIG_SMP
+static inline pte_t native_ptep_get_and_clear(pte_t *ptep)
+{
+	pte_t res;
+
+	/* xchg acts as a barrier before the setting of the high bits */
+	res.pte_low = xchg(&ptep->pte_low, 0);
+	res.pte_high = ptep->pte_high;
+	ptep->pte_high = 0;
+
+	return res;
+}
+#else
+#define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
+#endif
+
+#define __HAVE_ARCH_PTE_SAME
+static inline int pte_same(pte_t a, pte_t b)
+{
+	return a.pte_low == b.pte_low && a.pte_high == b.pte_high;
+}
+
+static inline int pte_none(pte_t pte)
+{
+	return !pte.pte_low && !pte.pte_high;
+}
+
+/*
+ * Bits 0, 6 and 7 are taken in the low part of the pte,
+ * put the 32 bits of offset into the high part.
+ */
+#define pte_to_pgoff(pte) ((pte).pte_high)
+#define pgoff_to_pte(off)						\
+	((pte_t) { { .pte_low = _PAGE_FILE, .pte_high = (off) } })
+#define PTE_FILE_MAX_BITS       32
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x)			(((x).val) & 0x1f)
+#define __swp_offset(x)			((x).val >> 5)
+#define __swp_entry(type, offset)	((swp_entry_t){(type) | (offset) << 5})
+#define __pte_to_swp_entry(pte)		((swp_entry_t){ (pte).pte_high })
+#define __swp_entry_to_pte(x)		((pte_t){ { .pte_high = (x).val } })
+
+#endif /* _ASM_X86_PGTABLE_3LEVEL_H */
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
new file mode 100644
index 0000000..c012f3b
--- /dev/null
+++ b/arch/x86/include/asm/pgtable.h
@@ -0,0 +1,562 @@
+#ifndef _ASM_X86_PGTABLE_H
+#define _ASM_X86_PGTABLE_H
+
+#define FIRST_USER_ADDRESS	0
+
+#define _PAGE_BIT_PRESENT	0	/* is present */
+#define _PAGE_BIT_RW		1	/* writeable */
+#define _PAGE_BIT_USER		2	/* userspace addressable */
+#define _PAGE_BIT_PWT		3	/* page write through */
+#define _PAGE_BIT_PCD		4	/* page cache disabled */
+#define _PAGE_BIT_ACCESSED	5	/* was accessed (raised by CPU) */
+#define _PAGE_BIT_DIRTY		6	/* was written to (raised by CPU) */
+#define _PAGE_BIT_FILE		6
+#define _PAGE_BIT_PSE		7	/* 4 MB (or 2MB) page */
+#define _PAGE_BIT_PAT		7	/* on 4KB pages */
+#define _PAGE_BIT_GLOBAL	8	/* Global TLB entry PPro+ */
+#define _PAGE_BIT_UNUSED1	9	/* available for programmer */
+#define _PAGE_BIT_IOMAP		10	/* flag used to indicate IO mapping */
+#define _PAGE_BIT_UNUSED3	11
+#define _PAGE_BIT_PAT_LARGE	12	/* On 2MB or 1GB pages */
+#define _PAGE_BIT_SPECIAL	_PAGE_BIT_UNUSED1
+#define _PAGE_BIT_CPA_TEST	_PAGE_BIT_UNUSED1
+#define _PAGE_BIT_NX           63       /* No execute: only valid after cpuid check */
+
+#define _PAGE_PRESENT	(_AT(pteval_t, 1) << _PAGE_BIT_PRESENT)
+#define _PAGE_RW	(_AT(pteval_t, 1) << _PAGE_BIT_RW)
+#define _PAGE_USER	(_AT(pteval_t, 1) << _PAGE_BIT_USER)
+#define _PAGE_PWT	(_AT(pteval_t, 1) << _PAGE_BIT_PWT)
+#define _PAGE_PCD	(_AT(pteval_t, 1) << _PAGE_BIT_PCD)
+#define _PAGE_ACCESSED	(_AT(pteval_t, 1) << _PAGE_BIT_ACCESSED)
+#define _PAGE_DIRTY	(_AT(pteval_t, 1) << _PAGE_BIT_DIRTY)
+#define _PAGE_PSE	(_AT(pteval_t, 1) << _PAGE_BIT_PSE)
+#define _PAGE_GLOBAL	(_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL)
+#define _PAGE_UNUSED1	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1)
+#define _PAGE_IOMAP	(_AT(pteval_t, 1) << _PAGE_BIT_IOMAP)
+#define _PAGE_UNUSED3	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED3)
+#define _PAGE_PAT	(_AT(pteval_t, 1) << _PAGE_BIT_PAT)
+#define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
+#define _PAGE_SPECIAL	(_AT(pteval_t, 1) << _PAGE_BIT_SPECIAL)
+#define _PAGE_CPA_TEST	(_AT(pteval_t, 1) << _PAGE_BIT_CPA_TEST)
+#define __HAVE_ARCH_PTE_SPECIAL
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+#define _PAGE_NX	(_AT(pteval_t, 1) << _PAGE_BIT_NX)
+#else
+#define _PAGE_NX	(_AT(pteval_t, 0))
+#endif
+
+/* If _PAGE_PRESENT is clear, we use these: */
+#define _PAGE_FILE	_PAGE_DIRTY	/* nonlinear file mapping,
+					 * saved PTE; unset:swap */
+#define _PAGE_PROTNONE	_PAGE_PSE	/* if the user mapped it with PROT_NONE;
+					   pte_present gives true */
+
+#define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER |	\
+			 _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED |	\
+			 _PAGE_DIRTY)
+
+/* Set of bits not changed in pte_modify */
+#define _PAGE_CHG_MASK	(PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT |		\
+			 _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define _PAGE_CACHE_MASK	(_PAGE_PCD | _PAGE_PWT)
+#define _PAGE_CACHE_WB		(0)
+#define _PAGE_CACHE_WC		(_PAGE_PWT)
+#define _PAGE_CACHE_UC_MINUS	(_PAGE_PCD)
+#define _PAGE_CACHE_UC		(_PAGE_PCD | _PAGE_PWT)
+
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
+				 _PAGE_ACCESSED | _PAGE_NX)
+
+#define PAGE_SHARED_EXEC	__pgprot(_PAGE_PRESENT | _PAGE_RW |	\
+					 _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_COPY_NOEXEC	__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
+					 _PAGE_ACCESSED | _PAGE_NX)
+#define PAGE_COPY_EXEC		__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
+					 _PAGE_ACCESSED)
+#define PAGE_COPY		PAGE_COPY_NOEXEC
+#define PAGE_READONLY		__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
+					 _PAGE_ACCESSED | _PAGE_NX)
+#define PAGE_READONLY_EXEC	__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
+					 _PAGE_ACCESSED)
+
+#define __PAGE_KERNEL_EXEC						\
+	(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL)
+#define __PAGE_KERNEL		(__PAGE_KERNEL_EXEC | _PAGE_NX)
+
+#define __PAGE_KERNEL_RO		(__PAGE_KERNEL & ~_PAGE_RW)
+#define __PAGE_KERNEL_RX		(__PAGE_KERNEL_EXEC & ~_PAGE_RW)
+#define __PAGE_KERNEL_EXEC_NOCACHE	(__PAGE_KERNEL_EXEC | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_WC		(__PAGE_KERNEL | _PAGE_CACHE_WC)
+#define __PAGE_KERNEL_NOCACHE		(__PAGE_KERNEL | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_UC_MINUS		(__PAGE_KERNEL | _PAGE_PCD)
+#define __PAGE_KERNEL_VSYSCALL		(__PAGE_KERNEL_RX | _PAGE_USER)
+#define __PAGE_KERNEL_VSYSCALL_NOCACHE	(__PAGE_KERNEL_VSYSCALL | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_LARGE		(__PAGE_KERNEL | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_NOCACHE	(__PAGE_KERNEL | _PAGE_CACHE_UC | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_EXEC	(__PAGE_KERNEL_EXEC | _PAGE_PSE)
+
+#define __PAGE_KERNEL_IO		(__PAGE_KERNEL | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_NOCACHE	(__PAGE_KERNEL_NOCACHE | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_UC_MINUS	(__PAGE_KERNEL_UC_MINUS | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_WC		(__PAGE_KERNEL_WC | _PAGE_IOMAP)
+
+#define PAGE_KERNEL			__pgprot(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO			__pgprot(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_EXEC		__pgprot(__PAGE_KERNEL_EXEC)
+#define PAGE_KERNEL_RX			__pgprot(__PAGE_KERNEL_RX)
+#define PAGE_KERNEL_WC			__pgprot(__PAGE_KERNEL_WC)
+#define PAGE_KERNEL_NOCACHE		__pgprot(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_UC_MINUS		__pgprot(__PAGE_KERNEL_UC_MINUS)
+#define PAGE_KERNEL_EXEC_NOCACHE	__pgprot(__PAGE_KERNEL_EXEC_NOCACHE)
+#define PAGE_KERNEL_LARGE		__pgprot(__PAGE_KERNEL_LARGE)
+#define PAGE_KERNEL_LARGE_NOCACHE	__pgprot(__PAGE_KERNEL_LARGE_NOCACHE)
+#define PAGE_KERNEL_LARGE_EXEC		__pgprot(__PAGE_KERNEL_LARGE_EXEC)
+#define PAGE_KERNEL_VSYSCALL		__pgprot(__PAGE_KERNEL_VSYSCALL)
+#define PAGE_KERNEL_VSYSCALL_NOCACHE	__pgprot(__PAGE_KERNEL_VSYSCALL_NOCACHE)
+
+#define PAGE_KERNEL_IO			__pgprot(__PAGE_KERNEL_IO)
+#define PAGE_KERNEL_IO_NOCACHE		__pgprot(__PAGE_KERNEL_IO_NOCACHE)
+#define PAGE_KERNEL_IO_UC_MINUS		__pgprot(__PAGE_KERNEL_IO_UC_MINUS)
+#define PAGE_KERNEL_IO_WC		__pgprot(__PAGE_KERNEL_IO_WC)
+
+/*         xwr */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY_EXEC
+#define __P101	PAGE_READONLY_EXEC
+#define __P110	PAGE_COPY_EXEC
+#define __P111	PAGE_COPY_EXEC
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY_EXEC
+#define __S101	PAGE_READONLY_EXEC
+#define __S110	PAGE_SHARED_EXEC
+#define __S111	PAGE_SHARED_EXEC
+
+/*
+ * early identity mapping  pte attrib macros.
+ */
+#ifdef CONFIG_X86_64
+#define __PAGE_KERNEL_IDENT_LARGE_EXEC	__PAGE_KERNEL_LARGE_EXEC
+#else
+/*
+ * For PDE_IDENT_ATTR include USER bit. As the PDE and PTE protection
+ * bits are combined, this will alow user to access the high address mapped
+ * VDSO in the presence of CONFIG_COMPAT_VDSO
+ */
+#define PTE_IDENT_ATTR	 0x003		/* PRESENT+RW */
+#define PDE_IDENT_ATTR	 0x067		/* PRESENT+RW+USER+DIRTY+ACCESSED */
+#define PGD_IDENT_ATTR	 0x001		/* PRESENT (no other attributes) */
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+extern spinlock_t pgd_lock;
+extern struct list_head pgd_list;
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_dirty(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_DIRTY;
+}
+
+static inline int pte_young(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_ACCESSED;
+}
+
+static inline int pte_write(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_RW;
+}
+
+static inline int pte_file(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_FILE;
+}
+
+static inline int pte_huge(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_PSE;
+}
+
+static inline int pte_global(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_GLOBAL;
+}
+
+static inline int pte_exec(pte_t pte)
+{
+	return !(pte_flags(pte) & _PAGE_NX);
+}
+
+static inline int pte_special(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_SPECIAL;
+}
+
+static inline unsigned long pte_pfn(pte_t pte)
+{
+	return (pte_val(pte) & PTE_PFN_MASK) >> PAGE_SHIFT;
+}
+
+#define pte_page(pte)	pfn_to_page(pte_pfn(pte))
+
+static inline int pmd_large(pmd_t pte)
+{
+	return (pmd_val(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
+		(_PAGE_PSE | _PAGE_PRESENT);
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_DIRTY);
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_ACCESSED);
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_RW);
+}
+
+static inline pte_t pte_mkexec(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_NX);
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_DIRTY);
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_ACCESSED);
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_RW);
+}
+
+static inline pte_t pte_mkhuge(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_PSE);
+}
+
+static inline pte_t pte_clrhuge(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_PSE);
+}
+
+static inline pte_t pte_mkglobal(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_GLOBAL);
+}
+
+static inline pte_t pte_clrglobal(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_GLOBAL);
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_SPECIAL);
+}
+
+extern pteval_t __supported_pte_mask;
+
+static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot)
+{
+	return __pte((((phys_addr_t)page_nr << PAGE_SHIFT) |
+		      pgprot_val(pgprot)) & __supported_pte_mask);
+}
+
+static inline pmd_t pfn_pmd(unsigned long page_nr, pgprot_t pgprot)
+{
+	return __pmd((((phys_addr_t)page_nr << PAGE_SHIFT) |
+		      pgprot_val(pgprot)) & __supported_pte_mask);
+}
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pteval_t val = pte_val(pte);
+
+	/*
+	 * Chop off the NX bit (if present), and add the NX portion of
+	 * the newprot (if present):
+	 */
+	val &= _PAGE_CHG_MASK;
+	val |= pgprot_val(newprot) & (~_PAGE_CHG_MASK) & __supported_pte_mask;
+
+	return __pte(val);
+}
+
+/* mprotect needs to preserve PAT bits when updating vm_page_prot */
+#define pgprot_modify pgprot_modify
+static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
+{
+	pgprotval_t preservebits = pgprot_val(oldprot) & _PAGE_CHG_MASK;
+	pgprotval_t addbits = pgprot_val(newprot);
+	return __pgprot(preservebits | addbits);
+}
+
+#define pte_pgprot(x) __pgprot(pte_flags(x) & PTE_FLAGS_MASK)
+
+#define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
+
+#ifndef __ASSEMBLY__
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+struct file;
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+                              unsigned long size, pgprot_t vma_prot);
+int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
+                              unsigned long size, pgprot_t *vma_prot);
+#endif
+
+/* Install a pte for a particular vaddr in kernel space. */
+void set_pte_vaddr(unsigned long vaddr, pte_t pte);
+
+#ifdef CONFIG_X86_32
+extern void native_pagetable_setup_start(pgd_t *base);
+extern void native_pagetable_setup_done(pgd_t *base);
+#else
+static inline void native_pagetable_setup_start(pgd_t *base) {}
+static inline void native_pagetable_setup_done(pgd_t *base) {}
+#endif
+
+struct seq_file;
+extern void arch_report_meminfo(struct seq_file *m);
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else  /* !CONFIG_PARAVIRT */
+#define set_pte(ptep, pte)		native_set_pte(ptep, pte)
+#define set_pte_at(mm, addr, ptep, pte)	native_set_pte_at(mm, addr, ptep, pte)
+
+#define set_pte_present(mm, addr, ptep, pte)				\
+	native_set_pte_present(mm, addr, ptep, pte)
+#define set_pte_atomic(ptep, pte)					\
+	native_set_pte_atomic(ptep, pte)
+
+#define set_pmd(pmdp, pmd)		native_set_pmd(pmdp, pmd)
+
+#ifndef __PAGETABLE_PUD_FOLDED
+#define set_pgd(pgdp, pgd)		native_set_pgd(pgdp, pgd)
+#define pgd_clear(pgd)			native_pgd_clear(pgd)
+#endif
+
+#ifndef set_pud
+# define set_pud(pudp, pud)		native_set_pud(pudp, pud)
+#endif
+
+#ifndef __PAGETABLE_PMD_FOLDED
+#define pud_clear(pud)			native_pud_clear(pud)
+#endif
+
+#define pte_clear(mm, addr, ptep)	native_pte_clear(mm, addr, ptep)
+#define pmd_clear(pmd)			native_pmd_clear(pmd)
+
+#define pte_update(mm, addr, ptep)              do { } while (0)
+#define pte_update_defer(mm, addr, ptep)        do { } while (0)
+
+static inline void __init paravirt_pagetable_setup_start(pgd_t *base)
+{
+	native_pagetable_setup_start(base);
+}
+
+static inline void __init paravirt_pagetable_setup_done(pgd_t *base)
+{
+	native_pagetable_setup_done(base);
+}
+#endif	/* CONFIG_PARAVIRT */
+
+#endif	/* __ASSEMBLY__ */
+
+#ifdef CONFIG_X86_32
+# include "pgtable_32.h"
+#else
+# include "pgtable_64.h"
+#endif
+
+/*
+ * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
+ *
+ * this macro returns the index of the entry in the pgd page which would
+ * control the given virtual address
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index((address)))
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, (address))
+
+
+#define KERNEL_PGD_BOUNDARY	pgd_index(PAGE_OFFSET)
+#define KERNEL_PGD_PTRS		(PTRS_PER_PGD - KERNEL_PGD_BOUNDARY)
+
+#ifndef __ASSEMBLY__
+
+enum {
+	PG_LEVEL_NONE,
+	PG_LEVEL_4K,
+	PG_LEVEL_2M,
+	PG_LEVEL_1G,
+	PG_LEVEL_NUM
+};
+
+#ifdef CONFIG_PROC_FS
+extern void update_page_count(int level, unsigned long pages);
+#else
+static inline void update_page_count(int level, unsigned long pages) { }
+#endif
+
+/*
+ * Helper function that returns the kernel pagetable entry controlling
+ * the virtual address 'address'. NULL means no pagetable entry present.
+ * NOTE: the return type is pte_t but if the pmd is PSE then we return it
+ * as a pte too.
+ */
+extern pte_t *lookup_address(unsigned long address, unsigned int *level);
+
+/* local pte updates need not use xchg for locking */
+static inline pte_t native_local_ptep_get_and_clear(pte_t *ptep)
+{
+	pte_t res = *ptep;
+
+	/* Pure native function needs no input for mm, addr */
+	native_pte_clear(NULL, 0, ptep);
+	return res;
+}
+
+static inline void native_set_pte_at(struct mm_struct *mm, unsigned long addr,
+				     pte_t *ptep , pte_t pte)
+{
+	native_set_pte(ptep, pte);
+}
+
+#ifndef CONFIG_PARAVIRT
+/*
+ * Rules for using pte_update - it must be called after any PTE update which
+ * has not been done using the set_pte / clear_pte interfaces.  It is used by
+ * shadow mode hypervisors to resynchronize the shadow page tables.  Kernel PTE
+ * updates should either be sets, clears, or set_pte_atomic for P->P
+ * transitions, which means this hook should only be called for user PTEs.
+ * This hook implies a P->P protection or access change has taken place, which
+ * requires a subsequent TLB flush.  The notification can optionally be delayed
+ * until the TLB flush event by using the pte_update_defer form of the
+ * interface, but care must be taken to assure that the flush happens while
+ * still holding the same page table lock so that the shadow and primary pages
+ * do not become out of sync on SMP.
+ */
+#define pte_update(mm, addr, ptep)		do { } while (0)
+#define pte_update_defer(mm, addr, ptep)	do { } while (0)
+#endif
+
+/*
+ * We only update the dirty/accessed state if we set
+ * the dirty bit by hand in the kernel, since the hardware
+ * will do the accessed bit for us, and we don't want to
+ * race with other CPU's that might be updating the dirty
+ * bit at the same time.
+ */
+struct vm_area_struct;
+
+#define  __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+extern int ptep_set_access_flags(struct vm_area_struct *vma,
+				 unsigned long address, pte_t *ptep,
+				 pte_t entry, int dirty);
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+extern int ptep_test_and_clear_young(struct vm_area_struct *vma,
+				     unsigned long addr, pte_t *ptep);
+
+#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+extern int ptep_clear_flush_young(struct vm_area_struct *vma,
+				  unsigned long address, pte_t *ptep);
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+				       pte_t *ptep)
+{
+	pte_t pte = native_ptep_get_and_clear(ptep);
+	pte_update(mm, addr, ptep);
+	return pte;
+}
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
+static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
+					    unsigned long addr, pte_t *ptep,
+					    int full)
+{
+	pte_t pte;
+	if (full) {
+		/*
+		 * Full address destruction in progress; paravirt does not
+		 * care about updates and native needs no locking
+		 */
+		pte = native_local_ptep_get_and_clear(ptep);
+	} else {
+		pte = ptep_get_and_clear(mm, addr, ptep);
+	}
+	return pte;
+}
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm,
+				      unsigned long addr, pte_t *ptep)
+{
+	clear_bit(_PAGE_BIT_RW, (unsigned long *)&ptep->pte);
+	pte_update(mm, addr, ptep);
+}
+
+/*
+ * clone_pgd_range(pgd_t *dst, pgd_t *src, int count);
+ *
+ *  dst - pointer to pgd range anwhere on a pgd page
+ *  src - ""
+ *  count - the number of pgds to copy.
+ *
+ * dst and src can be on the same page, but the range must not overlap,
+ * and must not cross a page boundary.
+ */
+static inline void clone_pgd_range(pgd_t *dst, pgd_t *src, int count)
+{
+       memcpy(dst, src, count * sizeof(pgd_t));
+}
+
+
+#include <asm-generic/pgtable.h>
+#endif	/* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_PGTABLE_H */
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
new file mode 100644
index 0000000..f9d5889
--- /dev/null
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -0,0 +1,191 @@
+#ifndef _ASM_X86_PGTABLE_32_H
+#define _ASM_X86_PGTABLE_32_H
+
+
+/*
+ * The Linux memory management assumes a three-level page table setup. On
+ * the i386, we use that, but "fold" the mid level into the top-level page
+ * table, so that we physically have the same two-level page table as the
+ * i386 mmu expects.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the i386 page table tree.
+ */
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/fixmap.h>
+#include <linux/threads.h>
+#include <asm/paravirt.h>
+
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+struct mm_struct;
+struct vm_area_struct;
+
+extern pgd_t swapper_pg_dir[1024];
+
+static inline void pgtable_cache_init(void) { }
+static inline void check_pgt_cache(void) { }
+void paging_init(void);
+
+extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t);
+
+/*
+ * The Linux x86 paging architecture is 'compile-time dual-mode', it
+ * implements both the traditional 2-level x86 page tables and the
+ * newer 3-level PAE-mode page tables.
+ */
+#ifdef CONFIG_X86_PAE
+# include <asm/pgtable-3level-defs.h>
+# define PMD_SIZE	(1UL << PMD_SHIFT)
+# define PMD_MASK	(~(PMD_SIZE - 1))
+#else
+# include <asm/pgtable-2level-defs.h>
+#endif
+
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE - 1))
+
+/* Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	(8 * 1024 * 1024)
+#define VMALLOC_START	((unsigned long)high_memory + VMALLOC_OFFSET)
+#ifdef CONFIG_X86_PAE
+#define LAST_PKMAP 512
+#else
+#define LAST_PKMAP 1024
+#endif
+
+#define PKMAP_BASE ((FIXADDR_BOOT_START - PAGE_SIZE * (LAST_PKMAP + 1))	\
+		    & PMD_MASK)
+
+#ifdef CONFIG_HIGHMEM
+# define VMALLOC_END	(PKMAP_BASE - 2 * PAGE_SIZE)
+#else
+# define VMALLOC_END	(FIXADDR_START - 2 * PAGE_SIZE)
+#endif
+
+#define MAXMEM	(VMALLOC_END - PAGE_OFFSET - __VMALLOC_RESERVE)
+
+/*
+ * Define this if things work differently on an i386 and an i486:
+ * it will (on an i486) warn about kernel memory accesses that are
+ * done without a 'access_ok(VERIFY_WRITE,..)'
+ */
+#undef TEST_ACCESS_OK
+
+/* The boot page tables (all created as a single array) */
+extern unsigned long pg0[];
+
+#define pte_present(x)	((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
+
+/* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
+#define pmd_none(x)	(!(unsigned long)pmd_val((x)))
+#define pmd_present(x)	(pmd_val((x)) & _PAGE_PRESENT)
+#define pmd_bad(x) ((pmd_val(x) & (PTE_FLAGS_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+
+#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
+
+#ifdef CONFIG_X86_PAE
+# include <asm/pgtable-3level.h>
+#else
+# include <asm/pgtable-2level.h>
+#endif
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ * On processors which do not support it, this is a no-op.
+ */
+#define pgprot_noncached(prot)					\
+	((boot_cpu_data.x86 > 3)				\
+	 ? (__pgprot(pgprot_val(prot) | _PAGE_PCD | _PAGE_PWT))	\
+	 : (prot))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+
+static inline int pud_large(pud_t pud) { return 0; }
+
+/*
+ * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * this macro returns the index of the entry in the pmd page which would
+ * control the given virtual address
+ */
+#define pmd_index(address)				\
+	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address)					\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address)				\
+	((pte_t *)pmd_page_vaddr(*(dir)) +  pte_index((address)))
+
+#define pmd_page(pmd) (pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
+
+#define pmd_page_vaddr(pmd)					\
+	((unsigned long)__va(pmd_val((pmd)) & PTE_PFN_MASK))
+
+#if defined(CONFIG_HIGHPTE)
+#define pte_offset_map(dir, address)					\
+	((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE0) +		\
+	 pte_index((address)))
+#define pte_offset_map_nested(dir, address)				\
+	((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE1) +		\
+	 pte_index((address)))
+#define pte_unmap(pte) kunmap_atomic((pte), KM_PTE0)
+#define pte_unmap_nested(pte) kunmap_atomic((pte), KM_PTE1)
+#else
+#define pte_offset_map(dir, address)					\
+	((pte_t *)page_address(pmd_page(*(dir))) + pte_index((address)))
+#define pte_offset_map_nested(dir, address) pte_offset_map((dir), (address))
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+#endif
+
+/* Clear a kernel PTE and flush it from the TLB */
+#define kpte_clear_flush(ptep, vaddr)		\
+do {						\
+	pte_clear(&init_mm, (vaddr), (ptep));	\
+	__flush_tlb_one((vaddr));		\
+} while (0)
+
+/*
+ * The i386 doesn't have any external MMU info: the kernel page
+ * tables contain all the necessary information.
+ */
+#define update_mmu_cache(vma, address, pte) do { } while (0)
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * kern_addr_valid() is (1) for FLATMEM and (0) for
+ * SPARSEMEM and DISCONTIGMEM
+ */
+#ifdef CONFIG_FLATMEM
+#define kern_addr_valid(addr)	(1)
+#else
+#define kern_addr_valid(kaddr)	(0)
+#endif
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
+	remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#endif /* _ASM_X86_PGTABLE_32_H */
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
new file mode 100644
index 0000000..545a0e0
--- /dev/null
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -0,0 +1,285 @@
+#ifndef _ASM_X86_PGTABLE_64_H
+#define _ASM_X86_PGTABLE_64_H
+
+#include <linux/const.h>
+#ifndef __ASSEMBLY__
+
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the x86-64 page table tree.
+ */
+#include <asm/processor.h>
+#include <linux/bitops.h>
+#include <linux/threads.h>
+#include <asm/pda.h>
+
+extern pud_t level3_kernel_pgt[512];
+extern pud_t level3_ident_pgt[512];
+extern pmd_t level2_kernel_pgt[512];
+extern pmd_t level2_fixmap_pgt[512];
+extern pmd_t level2_ident_pgt[512];
+extern pgd_t init_level4_pgt[];
+
+#define swapper_pg_dir init_level4_pgt
+
+extern void paging_init(void);
+
+#endif /* !__ASSEMBLY__ */
+
+#define SHARED_KERNEL_PMD	0
+
+/*
+ * PGDIR_SHIFT determines what a top-level page table entry can map
+ */
+#define PGDIR_SHIFT	39
+#define PTRS_PER_PGD	512
+
+/*
+ * 3rd level page
+ */
+#define PUD_SHIFT	30
+#define PTRS_PER_PUD	512
+
+/*
+ * PMD_SHIFT determines the size of the area a middle-level
+ * page table can map
+ */
+#define PMD_SHIFT	21
+#define PTRS_PER_PMD	512
+
+/*
+ * entries per page directory level
+ */
+#define PTRS_PER_PTE	512
+
+#ifndef __ASSEMBLY__
+
+#define pte_ERROR(e)					\
+	printk("%s:%d: bad pte %p(%016lx).\n",		\
+	       __FILE__, __LINE__, &(e), pte_val(e))
+#define pmd_ERROR(e)					\
+	printk("%s:%d: bad pmd %p(%016lx).\n",		\
+	       __FILE__, __LINE__, &(e), pmd_val(e))
+#define pud_ERROR(e)					\
+	printk("%s:%d: bad pud %p(%016lx).\n",		\
+	       __FILE__, __LINE__, &(e), pud_val(e))
+#define pgd_ERROR(e)					\
+	printk("%s:%d: bad pgd %p(%016lx).\n",		\
+	       __FILE__, __LINE__, &(e), pgd_val(e))
+
+#define pgd_none(x)	(!pgd_val(x))
+#define pud_none(x)	(!pud_val(x))
+
+struct mm_struct;
+
+void set_pte_vaddr_pud(pud_t *pud_page, unsigned long vaddr, pte_t new_pte);
+
+
+static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr,
+				    pte_t *ptep)
+{
+	*ptep = native_make_pte(0);
+}
+
+static inline void native_set_pte(pte_t *ptep, pte_t pte)
+{
+	*ptep = pte;
+}
+
+static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+	native_set_pte(ptep, pte);
+}
+
+static inline pte_t native_ptep_get_and_clear(pte_t *xp)
+{
+#ifdef CONFIG_SMP
+	return native_make_pte(xchg(&xp->pte, 0));
+#else
+	/* native_local_ptep_get_and_clear,
+	   but duplicated because of cyclic dependency */
+	pte_t ret = *xp;
+	native_pte_clear(NULL, 0, xp);
+	return ret;
+#endif
+}
+
+static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
+{
+	*pmdp = pmd;
+}
+
+static inline void native_pmd_clear(pmd_t *pmd)
+{
+	native_set_pmd(pmd, native_make_pmd(0));
+}
+
+static inline void native_set_pud(pud_t *pudp, pud_t pud)
+{
+	*pudp = pud;
+}
+
+static inline void native_pud_clear(pud_t *pud)
+{
+	native_set_pud(pud, native_make_pud(0));
+}
+
+static inline void native_set_pgd(pgd_t *pgdp, pgd_t pgd)
+{
+	*pgdp = pgd;
+}
+
+static inline void native_pgd_clear(pgd_t *pgd)
+{
+	native_set_pgd(pgd, native_make_pgd(0));
+}
+
+#define pte_same(a, b)		((a).pte == (b).pte)
+
+#endif /* !__ASSEMBLY__ */
+
+#define PMD_SIZE	(_AC(1, UL) << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE - 1))
+#define PUD_SIZE	(_AC(1, UL) << PUD_SHIFT)
+#define PUD_MASK	(~(PUD_SIZE - 1))
+#define PGDIR_SIZE	(_AC(1, UL) << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE - 1))
+
+
+#define MAXMEM		 _AC(0x00003fffffffffff, UL)
+#define VMALLOC_START    _AC(0xffffc20000000000, UL)
+#define VMALLOC_END      _AC(0xffffe1ffffffffff, UL)
+#define VMEMMAP_START	 _AC(0xffffe20000000000, UL)
+#define MODULES_VADDR    _AC(0xffffffffa0000000, UL)
+#define MODULES_END      _AC(0xffffffffff000000, UL)
+#define MODULES_LEN   (MODULES_END - MODULES_VADDR)
+
+#ifndef __ASSEMBLY__
+
+static inline int pgd_bad(pgd_t pgd)
+{
+	return (pgd_val(pgd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
+}
+
+static inline int pud_bad(pud_t pud)
+{
+	return (pud_val(pud) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
+}
+
+static inline int pmd_bad(pmd_t pmd)
+{
+	return (pmd_val(pmd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
+}
+
+#define pte_none(x)	(!pte_val((x)))
+#define pte_present(x)	(pte_val((x)) & (_PAGE_PRESENT | _PAGE_PROTNONE))
+
+#define pages_to_mb(x)	((x) >> (20 - PAGE_SHIFT))   /* FIXME: is this right? */
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#define pgprot_noncached(prot)					\
+	(__pgprot(pgprot_val((prot)) | _PAGE_PCD | _PAGE_PWT))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+/*
+ * Level 4 access.
+ */
+#define pgd_page_vaddr(pgd)						\
+	((unsigned long)__va((unsigned long)pgd_val((pgd)) & PTE_PFN_MASK))
+#define pgd_page(pgd)		(pfn_to_page(pgd_val((pgd)) >> PAGE_SHIFT))
+#define pgd_present(pgd) (pgd_val(pgd) & _PAGE_PRESENT)
+static inline int pgd_large(pgd_t pgd) { return 0; }
+#define mk_kernel_pgd(address) __pgd((address) | _KERNPG_TABLE)
+
+/* PUD - Level3 access */
+/* to find an entry in a page-table-directory. */
+#define pud_page_vaddr(pud)						\
+	((unsigned long)__va(pud_val((pud)) & PHYSICAL_PAGE_MASK))
+#define pud_page(pud)	(pfn_to_page(pud_val((pud)) >> PAGE_SHIFT))
+#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
+#define pud_offset(pgd, address)					\
+	((pud_t *)pgd_page_vaddr(*(pgd)) + pud_index((address)))
+#define pud_present(pud) (pud_val((pud)) & _PAGE_PRESENT)
+
+static inline int pud_large(pud_t pte)
+{
+	return (pud_val(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
+		(_PAGE_PSE | _PAGE_PRESENT);
+}
+
+/* PMD  - Level 2 access */
+#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val((pmd)) & PTE_PFN_MASK))
+#define pmd_page(pmd)		(pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
+
+#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+#define pmd_offset(dir, address) ((pmd_t *)pud_page_vaddr(*(dir)) + \
+				  pmd_index(address))
+#define pmd_none(x)	(!pmd_val((x)))
+#define pmd_present(x)	(pmd_val((x)) & _PAGE_PRESENT)
+#define pfn_pmd(nr, prot) (__pmd(((nr) << PAGE_SHIFT) | pgprot_val((prot))))
+#define pmd_pfn(x)  ((pmd_val((x)) & __PHYSICAL_MASK) >> PAGE_SHIFT)
+
+#define pte_to_pgoff(pte) ((pte_val((pte)) & PHYSICAL_PAGE_MASK) >> PAGE_SHIFT)
+#define pgoff_to_pte(off) ((pte_t) { .pte = ((off) << PAGE_SHIFT) |	\
+					    _PAGE_FILE })
+#define PTE_FILE_MAX_BITS __PHYSICAL_MASK_SHIFT
+
+/* PTE - Level 1 access. */
+
+/* page, protection -> pte */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn((page)), (pgprot))
+
+#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) ((pte_t *) pmd_page_vaddr(*(dir)) + \
+					 pte_index((address)))
+
+/* x86-64 always has all page tables mapped. */
+#define pte_offset_map(dir, address) pte_offset_kernel((dir), (address))
+#define pte_offset_map_nested(dir, address) pte_offset_kernel((dir), (address))
+#define pte_unmap(pte) /* NOP */
+#define pte_unmap_nested(pte) /* NOP */
+
+#define update_mmu_cache(vma, address, pte) do { } while (0)
+
+extern int direct_gbpages;
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x)			(((x).val >> 1) & 0x3f)
+#define __swp_offset(x)			((x).val >> 8)
+#define __swp_entry(type, offset)	((swp_entry_t) { ((type) << 1) | \
+							 ((offset) << 8) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val((pte)) })
+#define __swp_entry_to_pte(x)		((pte_t) { .pte = (x).val })
+
+extern int kern_addr_valid(unsigned long addr);
+extern void cleanup_highmap(void);
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
+	remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+
+#define pgtable_cache_init()   do { } while (0)
+#define check_pgt_cache()      do { } while (0)
+
+#define PAGE_AGP    PAGE_KERNEL_NOCACHE
+#define HAVE_PAGE_AGP 1
+
+/* fs/proc/kcore.c */
+#define	kc_vaddr_to_offset(v) ((v) & __VIRTUAL_MASK)
+#define	kc_offset_to_vaddr(o)				\
+	(((o) & (1UL << (__VIRTUAL_MASK_SHIFT - 1)))	\
+	 ? ((o) | ~__VIRTUAL_MASK)			\
+	 : (o))
+
+#define __HAVE_ARCH_PTE_SAME
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_X86_PGTABLE_64_H */
diff --git a/include/asm-x86/poll.h b/arch/x86/include/asm/poll.h
similarity index 100%
rename from include/asm-x86/poll.h
rename to arch/x86/include/asm/poll.h
diff --git a/include/asm-x86/posix_types.h b/arch/x86/include/asm/posix_types.h
similarity index 100%
rename from include/asm-x86/posix_types.h
rename to arch/x86/include/asm/posix_types.h
diff --git a/arch/x86/include/asm/posix_types_32.h b/arch/x86/include/asm/posix_types_32.h
new file mode 100644
index 0000000..f7d9adf
--- /dev/null
+++ b/arch/x86/include/asm/posix_types_32.h
@@ -0,0 +1,85 @@
+#ifndef _ASM_X86_POSIX_TYPES_32_H
+#define _ASM_X86_POSIX_TYPES_32_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef	__FD_SET
+#define __FD_SET(fd,fdsetp)					\
+	asm volatile("btsl %1,%0":				\
+		     "+m" (*(__kernel_fd_set *)(fdsetp))	\
+		     : "r" ((int)(fd)))
+
+#undef	__FD_CLR
+#define __FD_CLR(fd,fdsetp)					\
+	asm volatile("btrl %1,%0":				\
+		     "+m" (*(__kernel_fd_set *)(fdsetp))	\
+		     : "r" ((int) (fd)))
+
+#undef	__FD_ISSET
+#define __FD_ISSET(fd,fdsetp)					\
+	(__extension__						\
+	 ({							\
+	 unsigned char __result;				\
+	 asm volatile("btl %1,%2 ; setb %0"			\
+		      : "=q" (__result)				\
+		      : "r" ((int)(fd)),			\
+			"m" (*(__kernel_fd_set *)(fdsetp)));	\
+	 __result;						\
+}))
+
+#undef	__FD_ZERO
+#define __FD_ZERO(fdsetp)					\
+do {								\
+	int __d0, __d1;						\
+	asm volatile("cld ; rep ; stosl"			\
+		     : "=m" (*(__kernel_fd_set *)(fdsetp)),	\
+		       "=&c" (__d0), "=&D" (__d1)		\
+		     : "a" (0), "1" (__FDSET_LONGS),		\
+		       "2" ((__kernel_fd_set *)(fdsetp))	\
+		     : "memory");				\
+} while (0)
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* _ASM_X86_POSIX_TYPES_32_H */
diff --git a/arch/x86/include/asm/posix_types_64.h b/arch/x86/include/asm/posix_types_64.h
new file mode 100644
index 0000000..eb8d2d9
--- /dev/null
+++ b/arch/x86/include/asm/posix_types_64.h
@@ -0,0 +1,119 @@
+#ifndef _ASM_X86_POSIX_TYPES_64_H
+#define _ASM_X86_POSIX_TYPES_64_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+typedef unsigned long	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef int		__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+typedef __kernel_uid_t __kernel_uid32_t;
+typedef __kernel_gid_t __kernel_gid32_t;
+
+typedef unsigned long	__kernel_old_dev_t;
+
+#ifdef __KERNEL__
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant cases (8 or 32 longs,
+ * for 256 and 1024-bit fd_sets respectively)
+ */
+#undef __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 32:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
+			tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
+			tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
+			tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
+			return;
+		case 16:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			return;
+		case 8:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			return;
+		case 4:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* _ASM_X86_POSIX_TYPES_64_H */
diff --git a/arch/x86/include/asm/prctl.h b/arch/x86/include/asm/prctl.h
new file mode 100644
index 0000000..fe68114
--- /dev/null
+++ b/arch/x86/include/asm/prctl.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_X86_PRCTL_H
+#define _ASM_X86_PRCTL_H
+
+#define ARCH_SET_GS 0x1001
+#define ARCH_SET_FS 0x1002
+#define ARCH_GET_FS 0x1003
+#define ARCH_GET_GS 0x1004
+
+
+#endif /* _ASM_X86_PRCTL_H */
diff --git a/include/asm-x86/processor-cyrix.h b/arch/x86/include/asm/processor-cyrix.h
similarity index 100%
rename from include/asm-x86/processor-cyrix.h
rename to arch/x86/include/asm/processor-cyrix.h
diff --git a/arch/x86/include/asm/processor-flags.h b/arch/x86/include/asm/processor-flags.h
new file mode 100644
index 0000000..7a3e836
--- /dev/null
+++ b/arch/x86/include/asm/processor-flags.h
@@ -0,0 +1,100 @@
+#ifndef _ASM_X86_PROCESSOR_FLAGS_H
+#define _ASM_X86_PROCESSOR_FLAGS_H
+/* Various flags defined: can be included from assembler. */
+
+/*
+ * EFLAGS bits
+ */
+#define X86_EFLAGS_CF	0x00000001 /* Carry Flag */
+#define X86_EFLAGS_PF	0x00000004 /* Parity Flag */
+#define X86_EFLAGS_AF	0x00000010 /* Auxillary carry Flag */
+#define X86_EFLAGS_ZF	0x00000040 /* Zero Flag */
+#define X86_EFLAGS_SF	0x00000080 /* Sign Flag */
+#define X86_EFLAGS_TF	0x00000100 /* Trap Flag */
+#define X86_EFLAGS_IF	0x00000200 /* Interrupt Flag */
+#define X86_EFLAGS_DF	0x00000400 /* Direction Flag */
+#define X86_EFLAGS_OF	0x00000800 /* Overflow Flag */
+#define X86_EFLAGS_IOPL	0x00003000 /* IOPL mask */
+#define X86_EFLAGS_NT	0x00004000 /* Nested Task */
+#define X86_EFLAGS_RF	0x00010000 /* Resume Flag */
+#define X86_EFLAGS_VM	0x00020000 /* Virtual Mode */
+#define X86_EFLAGS_AC	0x00040000 /* Alignment Check */
+#define X86_EFLAGS_VIF	0x00080000 /* Virtual Interrupt Flag */
+#define X86_EFLAGS_VIP	0x00100000 /* Virtual Interrupt Pending */
+#define X86_EFLAGS_ID	0x00200000 /* CPUID detection flag */
+
+/*
+ * Basic CPU control in CR0
+ */
+#define X86_CR0_PE	0x00000001 /* Protection Enable */
+#define X86_CR0_MP	0x00000002 /* Monitor Coprocessor */
+#define X86_CR0_EM	0x00000004 /* Emulation */
+#define X86_CR0_TS	0x00000008 /* Task Switched */
+#define X86_CR0_ET	0x00000010 /* Extension Type */
+#define X86_CR0_NE	0x00000020 /* Numeric Error */
+#define X86_CR0_WP	0x00010000 /* Write Protect */
+#define X86_CR0_AM	0x00040000 /* Alignment Mask */
+#define X86_CR0_NW	0x20000000 /* Not Write-through */
+#define X86_CR0_CD	0x40000000 /* Cache Disable */
+#define X86_CR0_PG	0x80000000 /* Paging */
+
+/*
+ * Paging options in CR3
+ */
+#define X86_CR3_PWT	0x00000008 /* Page Write Through */
+#define X86_CR3_PCD	0x00000010 /* Page Cache Disable */
+
+/*
+ * Intel CPU features in CR4
+ */
+#define X86_CR4_VME	0x00000001 /* enable vm86 extensions */
+#define X86_CR4_PVI	0x00000002 /* virtual interrupts flag enable */
+#define X86_CR4_TSD	0x00000004 /* disable time stamp at ipl 3 */
+#define X86_CR4_DE	0x00000008 /* enable debugging extensions */
+#define X86_CR4_PSE	0x00000010 /* enable page size extensions */
+#define X86_CR4_PAE	0x00000020 /* enable physical address extensions */
+#define X86_CR4_MCE	0x00000040 /* Machine check enable */
+#define X86_CR4_PGE	0x00000080 /* enable global pages */
+#define X86_CR4_PCE	0x00000100 /* enable performance counters at ipl 3 */
+#define X86_CR4_OSFXSR	0x00000200 /* enable fast FPU save and restore */
+#define X86_CR4_OSXMMEXCPT 0x00000400 /* enable unmasked SSE exceptions */
+#define X86_CR4_VMXE	0x00002000 /* enable VMX virtualization */
+#define X86_CR4_OSXSAVE 0x00040000 /* enable xsave and xrestore */
+
+/*
+ * x86-64 Task Priority Register, CR8
+ */
+#define X86_CR8_TPR	0x0000000F /* task priority register */
+
+/*
+ * AMD and Transmeta use MSRs for configuration; see <asm/msr-index.h>
+ */
+
+/*
+ *      NSC/Cyrix CPU configuration register indexes
+ */
+#define CX86_PCR0	0x20
+#define CX86_GCR	0xb8
+#define CX86_CCR0	0xc0
+#define CX86_CCR1	0xc1
+#define CX86_CCR2	0xc2
+#define CX86_CCR3	0xc3
+#define CX86_CCR4	0xe8
+#define CX86_CCR5	0xe9
+#define CX86_CCR6	0xea
+#define CX86_CCR7	0xeb
+#define CX86_PCR1	0xf0
+#define CX86_DIR0	0xfe
+#define CX86_DIR1	0xff
+#define CX86_ARR_BASE	0xc4
+#define CX86_RCR_BASE	0xdc
+
+#ifdef __KERNEL__
+#ifdef CONFIG_VM86
+#define X86_VM_MASK	X86_EFLAGS_VM
+#else
+#define X86_VM_MASK	0 /* No VM86 support */
+#endif
+#endif
+
+#endif /* _ASM_X86_PROCESSOR_FLAGS_H */
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
new file mode 100644
index 0000000..5ca01e3
--- /dev/null
+++ b/arch/x86/include/asm/processor.h
@@ -0,0 +1,936 @@
+#ifndef _ASM_X86_PROCESSOR_H
+#define _ASM_X86_PROCESSOR_H
+
+#include <asm/processor-flags.h>
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+#include <asm/vm86.h>
+#include <asm/math_emu.h>
+#include <asm/segment.h>
+#include <asm/types.h>
+#include <asm/sigcontext.h>
+#include <asm/current.h>
+#include <asm/cpufeature.h>
+#include <asm/system.h>
+#include <asm/page.h>
+#include <asm/percpu.h>
+#include <asm/msr.h>
+#include <asm/desc_defs.h>
+#include <asm/nops.h>
+#include <asm/ds.h>
+
+#include <linux/personality.h>
+#include <linux/cpumask.h>
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <linux/init.h>
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+static inline void *current_text_addr(void)
+{
+	void *pc;
+
+	asm volatile("mov $1f, %0; 1:":"=r" (pc));
+
+	return pc;
+}
+
+#ifdef CONFIG_X86_VSMP
+# define ARCH_MIN_TASKALIGN		(1 << INTERNODE_CACHE_SHIFT)
+# define ARCH_MIN_MMSTRUCT_ALIGN	(1 << INTERNODE_CACHE_SHIFT)
+#else
+# define ARCH_MIN_TASKALIGN		16
+# define ARCH_MIN_MMSTRUCT_ALIGN	0
+#endif
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *  Members of this structure are referenced in head.S, so think twice
+ *  before touching them. [mj]
+ */
+
+struct cpuinfo_x86 {
+	__u8			x86;		/* CPU family */
+	__u8			x86_vendor;	/* CPU vendor */
+	__u8			x86_model;
+	__u8			x86_mask;
+#ifdef CONFIG_X86_32
+	char			wp_works_ok;	/* It doesn't on 386's */
+
+	/* Problems on some 486Dx4's and old 386's: */
+	char			hlt_works_ok;
+	char			hard_math;
+	char			rfu;
+	char			fdiv_bug;
+	char			f00f_bug;
+	char			coma_bug;
+	char			pad0;
+#else
+	/* Number of 4K pages in DTLB/ITLB combined(in pages): */
+	int			 x86_tlbsize;
+	__u8			x86_virt_bits;
+	__u8			x86_phys_bits;
+#endif
+	/* CPUID returned core id bits: */
+	__u8			x86_coreid_bits;
+	/* Max extended CPUID function supported: */
+	__u32			extended_cpuid_level;
+	/* Maximum supported CPUID level, -1=no CPUID: */
+	int			cpuid_level;
+	__u32			x86_capability[NCAPINTS];
+	char			x86_vendor_id[16];
+	char			x86_model_id[64];
+	/* in KB - valid for CPUS which support this call: */
+	int			x86_cache_size;
+	int			x86_cache_alignment;	/* In bytes */
+	int			x86_power;
+	unsigned long		loops_per_jiffy;
+#ifdef CONFIG_SMP
+	/* cpus sharing the last level cache: */
+	cpumask_t		llc_shared_map;
+#endif
+	/* cpuid returned max cores value: */
+	u16			 x86_max_cores;
+	u16			apicid;
+	u16			initial_apicid;
+	u16			x86_clflush_size;
+#ifdef CONFIG_SMP
+	/* number of cores as seen by the OS: */
+	u16			booted_cores;
+	/* Physical processor id: */
+	u16			phys_proc_id;
+	/* Core id: */
+	u16			cpu_core_id;
+	/* Index into per_cpu list: */
+	u16			cpu_index;
+#endif
+} __attribute__((__aligned__(SMP_CACHE_BYTES)));
+
+#define X86_VENDOR_INTEL	0
+#define X86_VENDOR_CYRIX	1
+#define X86_VENDOR_AMD		2
+#define X86_VENDOR_UMC		3
+#define X86_VENDOR_CENTAUR	5
+#define X86_VENDOR_TRANSMETA	7
+#define X86_VENDOR_NSC		8
+#define X86_VENDOR_NUM		9
+
+#define X86_VENDOR_UNKNOWN	0xff
+
+/*
+ * capabilities of CPUs
+ */
+extern struct cpuinfo_x86	boot_cpu_data;
+extern struct cpuinfo_x86	new_cpu_data;
+
+extern struct tss_struct	doublefault_tss;
+extern __u32			cleared_cpu_caps[NCAPINTS];
+
+#ifdef CONFIG_SMP
+DECLARE_PER_CPU(struct cpuinfo_x86, cpu_info);
+#define cpu_data(cpu)		per_cpu(cpu_info, cpu)
+#define current_cpu_data	__get_cpu_var(cpu_info)
+#else
+#define cpu_data(cpu)		boot_cpu_data
+#define current_cpu_data	boot_cpu_data
+#endif
+
+extern const struct seq_operations cpuinfo_op;
+
+static inline int hlt_works(int cpu)
+{
+#ifdef CONFIG_X86_32
+	return cpu_data(cpu).hlt_works_ok;
+#else
+	return 1;
+#endif
+}
+
+#define cache_line_size()	(boot_cpu_data.x86_cache_alignment)
+
+extern void cpu_detect(struct cpuinfo_x86 *c);
+
+extern struct pt_regs *idle_regs(struct pt_regs *);
+
+extern void early_cpu_init(void);
+extern void identify_boot_cpu(void);
+extern void identify_secondary_cpu(struct cpuinfo_x86 *);
+extern void print_cpu_info(struct cpuinfo_x86 *);
+extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c);
+extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
+extern unsigned short num_cache_leaves;
+
+extern void detect_extended_topology(struct cpuinfo_x86 *c);
+extern void detect_ht(struct cpuinfo_x86 *c);
+
+static inline void native_cpuid(unsigned int *eax, unsigned int *ebx,
+				unsigned int *ecx, unsigned int *edx)
+{
+	/* ecx is often an input as well as an output. */
+	asm("cpuid"
+	    : "=a" (*eax),
+	      "=b" (*ebx),
+	      "=c" (*ecx),
+	      "=d" (*edx)
+	    : "0" (*eax), "2" (*ecx));
+}
+
+static inline void load_cr3(pgd_t *pgdir)
+{
+	write_cr3(__pa(pgdir));
+}
+
+#ifdef CONFIG_X86_32
+/* This is the TSS defined by the hardware. */
+struct x86_hw_tss {
+	unsigned short		back_link, __blh;
+	unsigned long		sp0;
+	unsigned short		ss0, __ss0h;
+	unsigned long		sp1;
+	/* ss1 caches MSR_IA32_SYSENTER_CS: */
+	unsigned short		ss1, __ss1h;
+	unsigned long		sp2;
+	unsigned short		ss2, __ss2h;
+	unsigned long		__cr3;
+	unsigned long		ip;
+	unsigned long		flags;
+	unsigned long		ax;
+	unsigned long		cx;
+	unsigned long		dx;
+	unsigned long		bx;
+	unsigned long		sp;
+	unsigned long		bp;
+	unsigned long		si;
+	unsigned long		di;
+	unsigned short		es, __esh;
+	unsigned short		cs, __csh;
+	unsigned short		ss, __ssh;
+	unsigned short		ds, __dsh;
+	unsigned short		fs, __fsh;
+	unsigned short		gs, __gsh;
+	unsigned short		ldt, __ldth;
+	unsigned short		trace;
+	unsigned short		io_bitmap_base;
+
+} __attribute__((packed));
+#else
+struct x86_hw_tss {
+	u32			reserved1;
+	u64			sp0;
+	u64			sp1;
+	u64			sp2;
+	u64			reserved2;
+	u64			ist[7];
+	u32			reserved3;
+	u32			reserved4;
+	u16			reserved5;
+	u16			io_bitmap_base;
+
+} __attribute__((packed)) ____cacheline_aligned;
+#endif
+
+/*
+ * IO-bitmap sizes:
+ */
+#define IO_BITMAP_BITS			65536
+#define IO_BITMAP_BYTES			(IO_BITMAP_BITS/8)
+#define IO_BITMAP_LONGS			(IO_BITMAP_BYTES/sizeof(long))
+#define IO_BITMAP_OFFSET		offsetof(struct tss_struct, io_bitmap)
+#define INVALID_IO_BITMAP_OFFSET	0x8000
+#define INVALID_IO_BITMAP_OFFSET_LAZY	0x9000
+
+struct tss_struct {
+	/*
+	 * The hardware state:
+	 */
+	struct x86_hw_tss	x86_tss;
+
+	/*
+	 * The extra 1 is there because the CPU will access an
+	 * additional byte beyond the end of the IO permission
+	 * bitmap. The extra byte must be all 1 bits, and must
+	 * be within the limit.
+	 */
+	unsigned long		io_bitmap[IO_BITMAP_LONGS + 1];
+	/*
+	 * Cache the current maximum and the last task that used the bitmap:
+	 */
+	unsigned long		io_bitmap_max;
+	struct thread_struct	*io_bitmap_owner;
+
+	/*
+	 * .. and then another 0x100 bytes for the emergency kernel stack:
+	 */
+	unsigned long		stack[64];
+
+} ____cacheline_aligned;
+
+DECLARE_PER_CPU(struct tss_struct, init_tss);
+
+/*
+ * Save the original ist values for checking stack pointers during debugging
+ */
+struct orig_ist {
+	unsigned long		ist[7];
+};
+
+#define	MXCSR_DEFAULT		0x1f80
+
+struct i387_fsave_struct {
+	u32			cwd;	/* FPU Control Word		*/
+	u32			swd;	/* FPU Status Word		*/
+	u32			twd;	/* FPU Tag Word			*/
+	u32			fip;	/* FPU IP Offset		*/
+	u32			fcs;	/* FPU IP Selector		*/
+	u32			foo;	/* FPU Operand Pointer Offset	*/
+	u32			fos;	/* FPU Operand Pointer Selector	*/
+
+	/* 8*10 bytes for each FP-reg = 80 bytes:			*/
+	u32			st_space[20];
+
+	/* Software status information [not touched by FSAVE ]:		*/
+	u32			status;
+};
+
+struct i387_fxsave_struct {
+	u16			cwd; /* Control Word			*/
+	u16			swd; /* Status Word			*/
+	u16			twd; /* Tag Word			*/
+	u16			fop; /* Last Instruction Opcode		*/
+	union {
+		struct {
+			u64	rip; /* Instruction Pointer		*/
+			u64	rdp; /* Data Pointer			*/
+		};
+		struct {
+			u32	fip; /* FPU IP Offset			*/
+			u32	fcs; /* FPU IP Selector			*/
+			u32	foo; /* FPU Operand Offset		*/
+			u32	fos; /* FPU Operand Selector		*/
+		};
+	};
+	u32			mxcsr;		/* MXCSR Register State */
+	u32			mxcsr_mask;	/* MXCSR Mask		*/
+
+	/* 8*16 bytes for each FP-reg = 128 bytes:			*/
+	u32			st_space[32];
+
+	/* 16*16 bytes for each XMM-reg = 256 bytes:			*/
+	u32			xmm_space[64];
+
+	u32			padding[12];
+
+	union {
+		u32		padding1[12];
+		u32		sw_reserved[12];
+	};
+
+} __attribute__((aligned(16)));
+
+struct i387_soft_struct {
+	u32			cwd;
+	u32			swd;
+	u32			twd;
+	u32			fip;
+	u32			fcs;
+	u32			foo;
+	u32			fos;
+	/* 8*10 bytes for each FP-reg = 80 bytes: */
+	u32			st_space[20];
+	u8			ftop;
+	u8			changed;
+	u8			lookahead;
+	u8			no_update;
+	u8			rm;
+	u8			alimit;
+	struct info		*info;
+	u32			entry_eip;
+};
+
+struct xsave_hdr_struct {
+	u64 xstate_bv;
+	u64 reserved1[2];
+	u64 reserved2[5];
+} __attribute__((packed));
+
+struct xsave_struct {
+	struct i387_fxsave_struct i387;
+	struct xsave_hdr_struct xsave_hdr;
+	/* new processor state extensions will go here */
+} __attribute__ ((packed, aligned (64)));
+
+union thread_xstate {
+	struct i387_fsave_struct	fsave;
+	struct i387_fxsave_struct	fxsave;
+	struct i387_soft_struct		soft;
+	struct xsave_struct		xsave;
+};
+
+#ifdef CONFIG_X86_64
+DECLARE_PER_CPU(struct orig_ist, orig_ist);
+#endif
+
+extern void print_cpu_info(struct cpuinfo_x86 *);
+extern unsigned int xstate_size;
+extern void free_thread_xstate(struct task_struct *);
+extern struct kmem_cache *task_xstate_cachep;
+extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c);
+extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
+extern unsigned short num_cache_leaves;
+
+struct thread_struct {
+	/* Cached TLS descriptors: */
+	struct desc_struct	tls_array[GDT_ENTRY_TLS_ENTRIES];
+	unsigned long		sp0;
+	unsigned long		sp;
+#ifdef CONFIG_X86_32
+	unsigned long		sysenter_cs;
+#else
+	unsigned long		usersp;	/* Copy from PDA */
+	unsigned short		es;
+	unsigned short		ds;
+	unsigned short		fsindex;
+	unsigned short		gsindex;
+#endif
+	unsigned long		ip;
+	unsigned long		fs;
+	unsigned long		gs;
+	/* Hardware debugging registers: */
+	unsigned long		debugreg0;
+	unsigned long		debugreg1;
+	unsigned long		debugreg2;
+	unsigned long		debugreg3;
+	unsigned long		debugreg6;
+	unsigned long		debugreg7;
+	/* Fault info: */
+	unsigned long		cr2;
+	unsigned long		trap_no;
+	unsigned long		error_code;
+	/* floating point and extended processor state */
+	union thread_xstate	*xstate;
+#ifdef CONFIG_X86_32
+	/* Virtual 86 mode info */
+	struct vm86_struct __user *vm86_info;
+	unsigned long		screen_bitmap;
+	unsigned long		v86flags;
+	unsigned long		v86mask;
+	unsigned long		saved_sp0;
+	unsigned int		saved_fs;
+	unsigned int		saved_gs;
+#endif
+	/* IO permissions: */
+	unsigned long		*io_bitmap_ptr;
+	unsigned long		iopl;
+	/* Max allowed port in the bitmap, in bytes: */
+	unsigned		io_bitmap_max;
+/* MSR_IA32_DEBUGCTLMSR value to switch in if TIF_DEBUGCTLMSR is set.  */
+	unsigned long	debugctlmsr;
+#ifdef CONFIG_X86_DS
+/* Debug Store context; see include/asm-x86/ds.h; goes into MSR_IA32_DS_AREA */
+	struct ds_context	*ds_ctx;
+#endif /* CONFIG_X86_DS */
+#ifdef CONFIG_X86_PTRACE_BTS
+/* the signal to send on a bts buffer overflow */
+	unsigned int	bts_ovfl_signal;
+#endif /* CONFIG_X86_PTRACE_BTS */
+};
+
+static inline unsigned long native_get_debugreg(int regno)
+{
+	unsigned long val = 0;	/* Damn you, gcc! */
+
+	switch (regno) {
+	case 0:
+		asm("mov %%db0, %0" :"=r" (val));
+		break;
+	case 1:
+		asm("mov %%db1, %0" :"=r" (val));
+		break;
+	case 2:
+		asm("mov %%db2, %0" :"=r" (val));
+		break;
+	case 3:
+		asm("mov %%db3, %0" :"=r" (val));
+		break;
+	case 6:
+		asm("mov %%db6, %0" :"=r" (val));
+		break;
+	case 7:
+		asm("mov %%db7, %0" :"=r" (val));
+		break;
+	default:
+		BUG();
+	}
+	return val;
+}
+
+static inline void native_set_debugreg(int regno, unsigned long value)
+{
+	switch (regno) {
+	case 0:
+		asm("mov %0, %%db0"	::"r" (value));
+		break;
+	case 1:
+		asm("mov %0, %%db1"	::"r" (value));
+		break;
+	case 2:
+		asm("mov %0, %%db2"	::"r" (value));
+		break;
+	case 3:
+		asm("mov %0, %%db3"	::"r" (value));
+		break;
+	case 6:
+		asm("mov %0, %%db6"	::"r" (value));
+		break;
+	case 7:
+		asm("mov %0, %%db7"	::"r" (value));
+		break;
+	default:
+		BUG();
+	}
+}
+
+/*
+ * Set IOPL bits in EFLAGS from given mask
+ */
+static inline void native_set_iopl_mask(unsigned mask)
+{
+#ifdef CONFIG_X86_32
+	unsigned int reg;
+
+	asm volatile ("pushfl;"
+		      "popl %0;"
+		      "andl %1, %0;"
+		      "orl %2, %0;"
+		      "pushl %0;"
+		      "popfl"
+		      : "=&r" (reg)
+		      : "i" (~X86_EFLAGS_IOPL), "r" (mask));
+#endif
+}
+
+static inline void
+native_load_sp0(struct tss_struct *tss, struct thread_struct *thread)
+{
+	tss->x86_tss.sp0 = thread->sp0;
+#ifdef CONFIG_X86_32
+	/* Only happens when SEP is enabled, no need to test "SEP"arately: */
+	if (unlikely(tss->x86_tss.ss1 != thread->sysenter_cs)) {
+		tss->x86_tss.ss1 = thread->sysenter_cs;
+		wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0);
+	}
+#endif
+}
+
+static inline void native_swapgs(void)
+{
+#ifdef CONFIG_X86_64
+	asm volatile("swapgs" ::: "memory");
+#endif
+}
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define __cpuid			native_cpuid
+#define paravirt_enabled()	0
+
+/*
+ * These special macros can be used to get or set a debugging register
+ */
+#define get_debugreg(var, register)				\
+	(var) = native_get_debugreg(register)
+#define set_debugreg(value, register)				\
+	native_set_debugreg(register, value)
+
+static inline void load_sp0(struct tss_struct *tss,
+			    struct thread_struct *thread)
+{
+	native_load_sp0(tss, thread);
+}
+
+#define set_iopl_mask native_set_iopl_mask
+#endif /* CONFIG_PARAVIRT */
+
+/*
+ * Save the cr4 feature set we're using (ie
+ * Pentium 4MB enable and PPro Global page
+ * enable), so that any CPU's that boot up
+ * after us can get the correct flags.
+ */
+extern unsigned long		mmu_cr4_features;
+
+static inline void set_in_cr4(unsigned long mask)
+{
+	unsigned cr4;
+
+	mmu_cr4_features |= mask;
+	cr4 = read_cr4();
+	cr4 |= mask;
+	write_cr4(cr4);
+}
+
+static inline void clear_in_cr4(unsigned long mask)
+{
+	unsigned cr4;
+
+	mmu_cr4_features &= ~mask;
+	cr4 = read_cr4();
+	cr4 &= ~mask;
+	write_cr4(cr4);
+}
+
+typedef struct {
+	unsigned long		seg;
+} mm_segment_t;
+
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy state */
+extern void prepare_to_copy(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+/*
+ * Generic CPUID function
+ * clear %ecx since some cpus (Cyrix MII) do not set or clear %ecx
+ * resulting in stale register contents being returned.
+ */
+static inline void cpuid(unsigned int op,
+			 unsigned int *eax, unsigned int *ebx,
+			 unsigned int *ecx, unsigned int *edx)
+{
+	*eax = op;
+	*ecx = 0;
+	__cpuid(eax, ebx, ecx, edx);
+}
+
+/* Some CPUID calls want 'count' to be placed in ecx */
+static inline void cpuid_count(unsigned int op, int count,
+			       unsigned int *eax, unsigned int *ebx,
+			       unsigned int *ecx, unsigned int *edx)
+{
+	*eax = op;
+	*ecx = count;
+	__cpuid(eax, ebx, ecx, edx);
+}
+
+/*
+ * CPUID functions returning a single datum
+ */
+static inline unsigned int cpuid_eax(unsigned int op)
+{
+	unsigned int eax, ebx, ecx, edx;
+
+	cpuid(op, &eax, &ebx, &ecx, &edx);
+
+	return eax;
+}
+
+static inline unsigned int cpuid_ebx(unsigned int op)
+{
+	unsigned int eax, ebx, ecx, edx;
+
+	cpuid(op, &eax, &ebx, &ecx, &edx);
+
+	return ebx;
+}
+
+static inline unsigned int cpuid_ecx(unsigned int op)
+{
+	unsigned int eax, ebx, ecx, edx;
+
+	cpuid(op, &eax, &ebx, &ecx, &edx);
+
+	return ecx;
+}
+
+static inline unsigned int cpuid_edx(unsigned int op)
+{
+	unsigned int eax, ebx, ecx, edx;
+
+	cpuid(op, &eax, &ebx, &ecx, &edx);
+
+	return edx;
+}
+
+/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
+static inline void rep_nop(void)
+{
+	asm volatile("rep; nop" ::: "memory");
+}
+
+static inline void cpu_relax(void)
+{
+	rep_nop();
+}
+
+/* Stop speculative execution: */
+static inline void sync_core(void)
+{
+	int tmp;
+
+	asm volatile("cpuid" : "=a" (tmp) : "0" (1)
+		     : "ebx", "ecx", "edx", "memory");
+}
+
+static inline void __monitor(const void *eax, unsigned long ecx,
+			     unsigned long edx)
+{
+	/* "monitor %eax, %ecx, %edx;" */
+	asm volatile(".byte 0x0f, 0x01, 0xc8;"
+		     :: "a" (eax), "c" (ecx), "d"(edx));
+}
+
+static inline void __mwait(unsigned long eax, unsigned long ecx)
+{
+	/* "mwait %eax, %ecx;" */
+	asm volatile(".byte 0x0f, 0x01, 0xc9;"
+		     :: "a" (eax), "c" (ecx));
+}
+
+static inline void __sti_mwait(unsigned long eax, unsigned long ecx)
+{
+	trace_hardirqs_on();
+	/* "mwait %eax, %ecx;" */
+	asm volatile("sti; .byte 0x0f, 0x01, 0xc9;"
+		     :: "a" (eax), "c" (ecx));
+}
+
+extern void mwait_idle_with_hints(unsigned long eax, unsigned long ecx);
+
+extern void select_idle_routine(const struct cpuinfo_x86 *c);
+
+extern unsigned long		boot_option_idle_override;
+extern unsigned long		idle_halt;
+extern unsigned long		idle_nomwait;
+
+/*
+ * on systems with caches, caches must be flashed as the absolute
+ * last instruction before going into a suspended halt.  Otherwise,
+ * dirty data can linger in the cache and become stale on resume,
+ * leading to strange errors.
+ *
+ * perform a variety of operations to guarantee that the compiler
+ * will not reorder instructions.  wbinvd itself is serializing
+ * so the processor will not reorder.
+ *
+ * Systems without cache can just go into halt.
+ */
+static inline void wbinvd_halt(void)
+{
+	mb();
+	/* check for clflush to determine if wbinvd is legal */
+	if (cpu_has_clflush)
+		asm volatile("cli; wbinvd; 1: hlt; jmp 1b" : : : "memory");
+	else
+		while (1)
+			halt();
+}
+
+extern void enable_sep_cpu(void);
+extern int sysenter_setup(void);
+
+/* Defined in head.S */
+extern struct desc_ptr		early_gdt_descr;
+
+extern void cpu_set_gdt(int);
+extern void switch_to_new_gdt(void);
+extern void cpu_init(void);
+extern void init_gdt(int cpu);
+
+static inline void update_debugctlmsr(unsigned long debugctlmsr)
+{
+#ifndef CONFIG_X86_DEBUGCTLMSR
+	if (boot_cpu_data.x86 < 6)
+		return;
+#endif
+	wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctlmsr);
+}
+
+/*
+ * from system description table in BIOS. Mostly for MCA use, but
+ * others may find it useful:
+ */
+extern unsigned int		machine_id;
+extern unsigned int		machine_submodel_id;
+extern unsigned int		BIOS_revision;
+
+/* Boot loader type from the setup header: */
+extern int			bootloader_type;
+
+extern char			ignore_fpu_irq;
+
+#define HAVE_ARCH_PICK_MMAP_LAYOUT 1
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+#ifdef CONFIG_X86_32
+# define BASE_PREFETCH		ASM_NOP4
+# define ARCH_HAS_PREFETCH
+#else
+# define BASE_PREFETCH		"prefetcht0 (%1)"
+#endif
+
+/*
+ * Prefetch instructions for Pentium III (+) and AMD Athlon (+)
+ *
+ * It's not worth to care about 3dnow prefetches for the K6
+ * because they are microcoded there and very slow.
+ */
+static inline void prefetch(const void *x)
+{
+	alternative_input(BASE_PREFETCH,
+			  "prefetchnta (%1)",
+			  X86_FEATURE_XMM,
+			  "r" (x));
+}
+
+/*
+ * 3dnow prefetch to get an exclusive cache line.
+ * Useful for spinlocks to avoid one state transition in the
+ * cache coherency protocol:
+ */
+static inline void prefetchw(const void *x)
+{
+	alternative_input(BASE_PREFETCH,
+			  "prefetchw (%1)",
+			  X86_FEATURE_3DNOW,
+			  "r" (x));
+}
+
+static inline void spin_lock_prefetch(const void *x)
+{
+	prefetchw(x);
+}
+
+#ifdef CONFIG_X86_32
+/*
+ * User space process size: 3GB (default).
+ */
+#define TASK_SIZE		PAGE_OFFSET
+#define STACK_TOP		TASK_SIZE
+#define STACK_TOP_MAX		STACK_TOP
+
+#define INIT_THREAD  {							  \
+	.sp0			= sizeof(init_stack) + (long)&init_stack, \
+	.vm86_info		= NULL,					  \
+	.sysenter_cs		= __KERNEL_CS,				  \
+	.io_bitmap_ptr		= NULL,					  \
+	.fs			= __KERNEL_PERCPU,			  \
+}
+
+/*
+ * Note that the .io_bitmap member must be extra-big. This is because
+ * the CPU will access an additional byte beyond the end of the IO
+ * permission bitmap. The extra byte must be all 1 bits, and must
+ * be within the limit.
+ */
+#define INIT_TSS  {							  \
+	.x86_tss = {							  \
+		.sp0		= sizeof(init_stack) + (long)&init_stack, \
+		.ss0		= __KERNEL_DS,				  \
+		.ss1		= __KERNEL_CS,				  \
+		.io_bitmap_base	= INVALID_IO_BITMAP_OFFSET,		  \
+	 },								  \
+	.io_bitmap		= { [0 ... IO_BITMAP_LONGS] = ~0 },	  \
+}
+
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+#define THREAD_SIZE_LONGS      (THREAD_SIZE/sizeof(unsigned long))
+#define KSTK_TOP(info)                                                 \
+({                                                                     \
+       unsigned long *__ptr = (unsigned long *)(info);                 \
+       (unsigned long)(&__ptr[THREAD_SIZE_LONGS]);                     \
+})
+
+/*
+ * The below -8 is to reserve 8 bytes on top of the ring0 stack.
+ * This is necessary to guarantee that the entire "struct pt_regs"
+ * is accessable even if the CPU haven't stored the SS/ESP registers
+ * on the stack (interrupt gate does not save these registers
+ * when switching to the same priv ring).
+ * Therefore beware: accessing the ss/esp fields of the
+ * "struct pt_regs" is possible, but they may contain the
+ * completely wrong values.
+ */
+#define task_pt_regs(task)                                             \
+({                                                                     \
+       struct pt_regs *__regs__;                                       \
+       __regs__ = (struct pt_regs *)(KSTK_TOP(task_stack_page(task))-8); \
+       __regs__ - 1;                                                   \
+})
+
+#define KSTK_ESP(task)		(task_pt_regs(task)->sp)
+
+#else
+/*
+ * User space process size. 47bits minus one guard page.
+ */
+#define TASK_SIZE64	((1UL << 47) - PAGE_SIZE)
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define IA32_PAGE_OFFSET	((current->personality & ADDR_LIMIT_3GB) ? \
+					0xc0000000 : 0xFFFFe000)
+
+#define TASK_SIZE		(test_thread_flag(TIF_IA32) ? \
+					IA32_PAGE_OFFSET : TASK_SIZE64)
+#define TASK_SIZE_OF(child)	((test_tsk_thread_flag(child, TIF_IA32)) ? \
+					IA32_PAGE_OFFSET : TASK_SIZE64)
+
+#define STACK_TOP		TASK_SIZE
+#define STACK_TOP_MAX		TASK_SIZE64
+
+#define INIT_THREAD  { \
+	.sp0 = (unsigned long)&init_stack + sizeof(init_stack) \
+}
+
+#define INIT_TSS  { \
+	.x86_tss.sp0 = (unsigned long)&init_stack + sizeof(init_stack) \
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ * What is this good for? it will be always the scheduler or ret_from_fork.
+ */
+#define thread_saved_pc(t)	(*(unsigned long *)((t)->thread.sp - 8))
+
+#define task_pt_regs(tsk)	((struct pt_regs *)(tsk)->thread.sp0 - 1)
+#define KSTK_ESP(tsk)		-1 /* sorry. doesn't work for syscall. */
+#endif /* CONFIG_X86_64 */
+
+extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
+					       unsigned long new_sp);
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 3))
+
+#define KSTK_EIP(task)		(task_pt_regs(task)->ip)
+
+/* Get/set a process' ability to use the timestamp counter instruction */
+#define GET_TSC_CTL(adr)	get_tsc_mode((adr))
+#define SET_TSC_CTL(val)	set_tsc_mode((val))
+
+extern int get_tsc_mode(unsigned long adr);
+extern int set_tsc_mode(unsigned int val);
+
+#endif /* _ASM_X86_PROCESSOR_H */
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
new file mode 100644
index 0000000..d6a22f9
--- /dev/null
+++ b/arch/x86/include/asm/proto.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_X86_PROTO_H
+#define _ASM_X86_PROTO_H
+
+#include <asm/ldt.h>
+
+/* misc architecture specific prototypes */
+
+extern void early_idt_handler(void);
+
+extern void system_call(void);
+extern void syscall_init(void);
+
+extern void ia32_syscall(void);
+extern void ia32_cstar_target(void);
+extern void ia32_sysenter_target(void);
+
+extern void syscall32_cpu_init(void);
+
+extern void check_efer(void);
+
+#ifdef CONFIG_X86_BIOS_REBOOT
+extern int reboot_force;
+#else
+static const int reboot_force = 0;
+#endif
+
+long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
+
+#define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1))
+#define round_down(x, y) ((x) & ~((y) - 1))
+
+#endif /* _ASM_X86_PROTO_H */
diff --git a/arch/x86/include/asm/ptrace-abi.h b/arch/x86/include/asm/ptrace-abi.h
new file mode 100644
index 0000000..25f1bb8
--- /dev/null
+++ b/arch/x86/include/asm/ptrace-abi.h
@@ -0,0 +1,145 @@
+#ifndef _ASM_X86_PTRACE_ABI_H
+#define _ASM_X86_PTRACE_ABI_H
+
+#ifdef __i386__
+
+#define EBX 0
+#define ECX 1
+#define EDX 2
+#define ESI 3
+#define EDI 4
+#define EBP 5
+#define EAX 6
+#define DS 7
+#define ES 8
+#define FS 9
+#define GS 10
+#define ORIG_EAX 11
+#define EIP 12
+#define CS  13
+#define EFL 14
+#define UESP 15
+#define SS   16
+#define FRAME_SIZE 17
+
+#else /* __i386__ */
+
+#if defined(__ASSEMBLY__) || defined(__FRAME_OFFSETS)
+#define R15 0
+#define R14 8
+#define R13 16
+#define R12 24
+#define RBP 32
+#define RBX 40
+/* arguments: interrupts/non tracing syscalls only save upto here*/
+#define R11 48
+#define R10 56
+#define R9 64
+#define R8 72
+#define RAX 80
+#define RCX 88
+#define RDX 96
+#define RSI 104
+#define RDI 112
+#define ORIG_RAX 120       /* = ERROR */
+/* end of arguments */
+/* cpu exception frame or undefined in case of fast syscall. */
+#define RIP 128
+#define CS 136
+#define EFLAGS 144
+#define RSP 152
+#define SS 160
+#define ARGOFFSET R11
+#endif /* __ASSEMBLY__ */
+
+/* top of stack page */
+#define FRAME_SIZE 168
+
+#endif /* !__i386__ */
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_GETFPXREGS         18
+#define PTRACE_SETFPXREGS         19
+
+#define PTRACE_OLDSETOPTIONS      21
+
+/* only useful for access 32bit programs / kernels */
+#define PTRACE_GET_THREAD_AREA    25
+#define PTRACE_SET_THREAD_AREA    26
+
+#ifdef __x86_64__
+# define PTRACE_ARCH_PRCTL	  30
+#endif
+
+#define PTRACE_SYSEMU		  31
+#define PTRACE_SYSEMU_SINGLESTEP  32
+
+#define PTRACE_SINGLEBLOCK	33	/* resume execution until next branch */
+
+#ifdef CONFIG_X86_PTRACE_BTS
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+/* configuration/status structure used in PTRACE_BTS_CONFIG and
+   PTRACE_BTS_STATUS commands.
+*/
+struct ptrace_bts_config {
+	/* requested or actual size of BTS buffer in bytes */
+	__u32 size;
+	/* bitmask of below flags */
+	__u32 flags;
+	/* buffer overflow signal */
+	__u32 signal;
+	/* actual size of bts_struct in bytes */
+	__u32 bts_size;
+};
+#endif /* __ASSEMBLY__ */
+
+#define PTRACE_BTS_O_TRACE	0x1 /* branch trace */
+#define PTRACE_BTS_O_SCHED	0x2 /* scheduling events w/ jiffies */
+#define PTRACE_BTS_O_SIGNAL     0x4 /* send SIG<signal> on buffer overflow
+				       instead of wrapping around */
+#define PTRACE_BTS_O_ALLOC	0x8 /* (re)allocate buffer */
+
+#define PTRACE_BTS_CONFIG	40
+/* Configure branch trace recording.
+   ADDR points to a struct ptrace_bts_config.
+   DATA gives the size of that buffer.
+   A new buffer is allocated, if requested in the flags.
+   An overflow signal may only be requested for new buffers.
+   Returns the number of bytes read.
+*/
+#define PTRACE_BTS_STATUS	41
+/* Return the current configuration in a struct ptrace_bts_config
+   pointed to by ADDR; DATA gives the size of that buffer.
+   Returns the number of bytes written.
+*/
+#define PTRACE_BTS_SIZE		42
+/* Return the number of available BTS records for draining.
+   DATA and ADDR are ignored.
+*/
+#define PTRACE_BTS_GET		43
+/* Get a single BTS record.
+   DATA defines the index into the BTS array, where 0 is the newest
+   entry, and higher indices refer to older entries.
+   ADDR is pointing to struct bts_struct (see asm/ds.h).
+*/
+#define PTRACE_BTS_CLEAR	44
+/* Clear the BTS buffer.
+   DATA and ADDR are ignored.
+*/
+#define PTRACE_BTS_DRAIN	45
+/* Read all available BTS records and clear the buffer.
+   ADDR points to an array of struct bts_struct.
+   DATA gives the size of that buffer.
+   BTS records are read from oldest to newest.
+   Returns number of BTS records drained.
+*/
+#endif /* CONFIG_X86_PTRACE_BTS */
+
+#endif /* _ASM_X86_PTRACE_ABI_H */
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
new file mode 100644
index 0000000..d1531c8
--- /dev/null
+++ b/arch/x86/include/asm/ptrace.h
@@ -0,0 +1,280 @@
+#ifndef _ASM_X86_PTRACE_H
+#define _ASM_X86_PTRACE_H
+
+#include <linux/compiler.h>	/* For __user */
+#include <asm/ptrace-abi.h>
+#include <asm/processor-flags.h>
+
+#ifdef __KERNEL__
+#include <asm/ds.h>		/* the DS BTS struct is used for ptrace too */
+#include <asm/segment.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef __i386__
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+#ifndef __KERNEL__
+
+struct pt_regs {
+	long ebx;
+	long ecx;
+	long edx;
+	long esi;
+	long edi;
+	long ebp;
+	long eax;
+	int  xds;
+	int  xes;
+	int  xfs;
+	/* int  gs; */
+	long orig_eax;
+	long eip;
+	int  xcs;
+	long eflags;
+	long esp;
+	int  xss;
+};
+
+#else /* __KERNEL__ */
+
+struct pt_regs {
+	unsigned long bx;
+	unsigned long cx;
+	unsigned long dx;
+	unsigned long si;
+	unsigned long di;
+	unsigned long bp;
+	unsigned long ax;
+	unsigned long ds;
+	unsigned long es;
+	unsigned long fs;
+	/* int  gs; */
+	unsigned long orig_ax;
+	unsigned long ip;
+	unsigned long cs;
+	unsigned long flags;
+	unsigned long sp;
+	unsigned long ss;
+};
+
+#endif /* __KERNEL__ */
+
+#else /* __i386__ */
+
+#ifndef __KERNEL__
+
+struct pt_regs {
+	unsigned long r15;
+	unsigned long r14;
+	unsigned long r13;
+	unsigned long r12;
+	unsigned long rbp;
+	unsigned long rbx;
+/* arguments: non interrupts/non tracing syscalls only save upto here*/
+	unsigned long r11;
+	unsigned long r10;
+	unsigned long r9;
+	unsigned long r8;
+	unsigned long rax;
+	unsigned long rcx;
+	unsigned long rdx;
+	unsigned long rsi;
+	unsigned long rdi;
+	unsigned long orig_rax;
+/* end of arguments */
+/* cpu exception frame or undefined */
+	unsigned long rip;
+	unsigned long cs;
+	unsigned long eflags;
+	unsigned long rsp;
+	unsigned long ss;
+/* top of stack page */
+};
+
+#else /* __KERNEL__ */
+
+struct pt_regs {
+	unsigned long r15;
+	unsigned long r14;
+	unsigned long r13;
+	unsigned long r12;
+	unsigned long bp;
+	unsigned long bx;
+/* arguments: non interrupts/non tracing syscalls only save upto here*/
+	unsigned long r11;
+	unsigned long r10;
+	unsigned long r9;
+	unsigned long r8;
+	unsigned long ax;
+	unsigned long cx;
+	unsigned long dx;
+	unsigned long si;
+	unsigned long di;
+	unsigned long orig_ax;
+/* end of arguments */
+/* cpu exception frame or undefined */
+	unsigned long ip;
+	unsigned long cs;
+	unsigned long flags;
+	unsigned long sp;
+	unsigned long ss;
+/* top of stack page */
+};
+
+#endif /* __KERNEL__ */
+#endif /* !__i386__ */
+
+
+#ifdef CONFIG_X86_PTRACE_BTS
+/* a branch trace record entry
+ *
+ * In order to unify the interface between various processor versions,
+ * we use the below data structure for all processors.
+ */
+enum bts_qualifier {
+	BTS_INVALID = 0,
+	BTS_BRANCH,
+	BTS_TASK_ARRIVES,
+	BTS_TASK_DEPARTS
+};
+
+struct bts_struct {
+	__u64 qualifier;
+	union {
+		/* BTS_BRANCH */
+		struct {
+			__u64 from_ip;
+			__u64 to_ip;
+		} lbr;
+		/* BTS_TASK_ARRIVES or
+		   BTS_TASK_DEPARTS */
+		__u64 jiffies;
+	} variant;
+};
+#endif /* CONFIG_X86_PTRACE_BTS */
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+
+struct cpuinfo_x86;
+struct task_struct;
+
+#ifdef CONFIG_X86_PTRACE_BTS
+extern void __cpuinit ptrace_bts_init_intel(struct cpuinfo_x86 *);
+extern void ptrace_bts_take_timestamp(struct task_struct *, enum bts_qualifier);
+#else
+#define ptrace_bts_init_intel(config) do {} while (0)
+#endif /* CONFIG_X86_PTRACE_BTS */
+
+extern unsigned long profile_pc(struct pt_regs *regs);
+
+extern unsigned long
+convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs);
+extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs,
+			 int error_code, int si_code);
+void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
+
+extern long syscall_trace_enter(struct pt_regs *);
+extern void syscall_trace_leave(struct pt_regs *);
+
+static inline unsigned long regs_return_value(struct pt_regs *regs)
+{
+	return regs->ax;
+}
+
+/*
+ * user_mode_vm(regs) determines whether a register set came from user mode.
+ * This is true if V8086 mode was enabled OR if the register set was from
+ * protected mode with RPL-3 CS value.  This tricky test checks that with
+ * one comparison.  Many places in the kernel can bypass this full check
+ * if they have already ruled out V8086 mode, so user_mode(regs) can be used.
+ */
+static inline int user_mode(struct pt_regs *regs)
+{
+#ifdef CONFIG_X86_32
+	return (regs->cs & SEGMENT_RPL_MASK) == USER_RPL;
+#else
+	return !!(regs->cs & 3);
+#endif
+}
+
+static inline int user_mode_vm(struct pt_regs *regs)
+{
+#ifdef CONFIG_X86_32
+	return ((regs->cs & SEGMENT_RPL_MASK) | (regs->flags & X86_VM_MASK)) >=
+		USER_RPL;
+#else
+	return user_mode(regs);
+#endif
+}
+
+static inline int v8086_mode(struct pt_regs *regs)
+{
+#ifdef CONFIG_X86_32
+	return (regs->flags & X86_VM_MASK);
+#else
+	return 0;	/* No V86 mode support in long mode */
+#endif
+}
+
+/*
+ * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
+ * when it traps.  So regs will be the current sp.
+ *
+ * This is valid only for kernel mode traps.
+ */
+static inline unsigned long kernel_trap_sp(struct pt_regs *regs)
+{
+#ifdef CONFIG_X86_32
+	return (unsigned long)regs;
+#else
+	return regs->sp;
+#endif
+}
+
+static inline unsigned long instruction_pointer(struct pt_regs *regs)
+{
+	return regs->ip;
+}
+
+static inline unsigned long frame_pointer(struct pt_regs *regs)
+{
+	return regs->bp;
+}
+
+static inline unsigned long user_stack_pointer(struct pt_regs *regs)
+{
+	return regs->sp;
+}
+
+/*
+ * These are defined as per linux/ptrace.h, which see.
+ */
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+
+extern void user_enable_block_step(struct task_struct *);
+#ifdef CONFIG_X86_DEBUGCTLMSR
+#define arch_has_block_step()	(1)
+#else
+#define arch_has_block_step()	(boot_cpu_data.x86 >= 6)
+#endif
+
+struct user_desc;
+extern int do_get_thread_area(struct task_struct *p, int idx,
+			      struct user_desc __user *info);
+extern int do_set_thread_area(struct task_struct *p, int idx,
+			      struct user_desc __user *info, int can_allocate);
+
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
+#endif /* __KERNEL__ */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_X86_PTRACE_H */
diff --git a/arch/x86/include/asm/pvclock-abi.h b/arch/x86/include/asm/pvclock-abi.h
new file mode 100644
index 0000000..6d93508
--- /dev/null
+++ b/arch/x86/include/asm/pvclock-abi.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_X86_PVCLOCK_ABI_H
+#define _ASM_X86_PVCLOCK_ABI_H
+#ifndef __ASSEMBLY__
+
+/*
+ * These structs MUST NOT be changed.
+ * They are the ABI between hypervisor and guest OS.
+ * Both Xen and KVM are using this.
+ *
+ * pvclock_vcpu_time_info holds the system time and the tsc timestamp
+ * of the last update. So the guest can use the tsc delta to get a
+ * more precise system time.  There is one per virtual cpu.
+ *
+ * pvclock_wall_clock references the point in time when the system
+ * time was zero (usually boot time), thus the guest calculates the
+ * current wall clock by adding the system time.
+ *
+ * Protocol for the "version" fields is: hypervisor raises it (making
+ * it uneven) before it starts updating the fields and raises it again
+ * (making it even) when it is done.  Thus the guest can make sure the
+ * time values it got are consistent by checking the version before
+ * and after reading them.
+ */
+
+struct pvclock_vcpu_time_info {
+	u32   version;
+	u32   pad0;
+	u64   tsc_timestamp;
+	u64   system_time;
+	u32   tsc_to_system_mul;
+	s8    tsc_shift;
+	u8    pad[3];
+} __attribute__((__packed__)); /* 32 bytes */
+
+struct pvclock_wall_clock {
+	u32   version;
+	u32   sec;
+	u32   nsec;
+} __attribute__((__packed__));
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_X86_PVCLOCK_ABI_H */
diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h
new file mode 100644
index 0000000..53235fd
--- /dev/null
+++ b/arch/x86/include/asm/pvclock.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_X86_PVCLOCK_H
+#define _ASM_X86_PVCLOCK_H
+
+#include <linux/clocksource.h>
+#include <asm/pvclock-abi.h>
+
+/* some helper functions for xen and kvm pv clock sources */
+cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src);
+unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src);
+void pvclock_read_wallclock(struct pvclock_wall_clock *wall,
+			    struct pvclock_vcpu_time_info *vcpu,
+			    struct timespec *ts);
+
+#endif /* _ASM_X86_PVCLOCK_H */
diff --git a/arch/x86/include/asm/reboot.h b/arch/x86/include/asm/reboot.h
new file mode 100644
index 0000000..df77103
--- /dev/null
+++ b/arch/x86/include/asm/reboot.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_X86_REBOOT_H
+#define _ASM_X86_REBOOT_H
+
+struct pt_regs;
+
+struct machine_ops {
+	void (*restart)(char *cmd);
+	void (*halt)(void);
+	void (*power_off)(void);
+	void (*shutdown)(void);
+	void (*crash_shutdown)(struct pt_regs *);
+	void (*emergency_restart)(void);
+};
+
+extern struct machine_ops machine_ops;
+
+void native_machine_crash_shutdown(struct pt_regs *regs);
+void native_machine_shutdown(void);
+void machine_real_restart(const unsigned char *code, int length);
+
+#endif /* _ASM_X86_REBOOT_H */
diff --git a/arch/x86/include/asm/reboot_fixups.h b/arch/x86/include/asm/reboot_fixups.h
new file mode 100644
index 0000000..765debe
--- /dev/null
+++ b/arch/x86/include/asm/reboot_fixups.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_X86_REBOOT_FIXUPS_H
+#define _ASM_X86_REBOOT_FIXUPS_H
+
+extern void mach_reboot_fixups(void);
+
+#endif /* _ASM_X86_REBOOT_FIXUPS_H */
diff --git a/arch/x86/include/asm/required-features.h b/arch/x86/include/asm/required-features.h
new file mode 100644
index 0000000..d5cd6c5
--- /dev/null
+++ b/arch/x86/include/asm/required-features.h
@@ -0,0 +1,82 @@
+#ifndef _ASM_X86_REQUIRED_FEATURES_H
+#define _ASM_X86_REQUIRED_FEATURES_H
+
+/* Define minimum CPUID feature set for kernel These bits are checked
+   really early to actually display a visible error message before the
+   kernel dies.  Make sure to assign features to the proper mask!
+
+   Some requirements that are not in CPUID yet are also in the
+   CONFIG_X86_MINIMUM_CPU_FAMILY which is checked too.
+
+   The real information is in arch/x86/Kconfig.cpu, this just converts
+   the CONFIGs into a bitmask */
+
+#ifndef CONFIG_MATH_EMULATION
+# define NEED_FPU	(1<<(X86_FEATURE_FPU & 31))
+#else
+# define NEED_FPU	0
+#endif
+
+#if defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64)
+# define NEED_PAE	(1<<(X86_FEATURE_PAE & 31))
+#else
+# define NEED_PAE	0
+#endif
+
+#ifdef CONFIG_X86_CMPXCHG64
+# define NEED_CX8	(1<<(X86_FEATURE_CX8 & 31))
+#else
+# define NEED_CX8	0
+#endif
+
+#if defined(CONFIG_X86_CMOV) || defined(CONFIG_X86_64)
+# define NEED_CMOV	(1<<(X86_FEATURE_CMOV & 31))
+#else
+# define NEED_CMOV	0
+#endif
+
+#ifdef CONFIG_X86_USE_3DNOW
+# define NEED_3DNOW	(1<<(X86_FEATURE_3DNOW & 31))
+#else
+# define NEED_3DNOW	0
+#endif
+
+#if defined(CONFIG_X86_P6_NOP) || defined(CONFIG_X86_64)
+# define NEED_NOPL	(1<<(X86_FEATURE_NOPL & 31))
+#else
+# define NEED_NOPL	0
+#endif
+
+#ifdef CONFIG_X86_64
+#define NEED_PSE	0
+#define NEED_MSR	(1<<(X86_FEATURE_MSR & 31))
+#define NEED_PGE	(1<<(X86_FEATURE_PGE & 31))
+#define NEED_FXSR	(1<<(X86_FEATURE_FXSR & 31))
+#define NEED_XMM	(1<<(X86_FEATURE_XMM & 31))
+#define NEED_XMM2	(1<<(X86_FEATURE_XMM2 & 31))
+#define NEED_LM		(1<<(X86_FEATURE_LM & 31))
+#else
+#define NEED_PSE	0
+#define NEED_MSR	0
+#define NEED_PGE	0
+#define NEED_FXSR	0
+#define NEED_XMM	0
+#define NEED_XMM2	0
+#define NEED_LM		0
+#endif
+
+#define REQUIRED_MASK0	(NEED_FPU|NEED_PSE|NEED_MSR|NEED_PAE|\
+			 NEED_CX8|NEED_PGE|NEED_FXSR|NEED_CMOV|\
+			 NEED_XMM|NEED_XMM2)
+#define SSE_MASK	(NEED_XMM|NEED_XMM2)
+
+#define REQUIRED_MASK1	(NEED_LM|NEED_3DNOW)
+
+#define REQUIRED_MASK2	0
+#define REQUIRED_MASK3	(NEED_NOPL)
+#define REQUIRED_MASK4	0
+#define REQUIRED_MASK5	0
+#define REQUIRED_MASK6	0
+#define REQUIRED_MASK7	0
+
+#endif /* _ASM_X86_REQUIRED_FEATURES_H */
diff --git a/include/asm-x86/resource.h b/arch/x86/include/asm/resource.h
similarity index 100%
rename from include/asm-x86/resource.h
rename to arch/x86/include/asm/resource.h
diff --git a/arch/x86/include/asm/resume-trace.h b/arch/x86/include/asm/resume-trace.h
new file mode 100644
index 0000000..3ff1c2c
--- /dev/null
+++ b/arch/x86/include/asm/resume-trace.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_X86_RESUME_TRACE_H
+#define _ASM_X86_RESUME_TRACE_H
+
+#include <asm/asm.h>
+
+#define TRACE_RESUME(user)					\
+do {								\
+	if (pm_trace_enabled) {					\
+		const void *tracedata;				\
+		asm volatile(_ASM_MOV " $1f,%0\n"		\
+			     ".section .tracedata,\"a\"\n"	\
+			     "1:\t.word %c1\n\t"		\
+			     _ASM_PTR " %c2\n"			\
+			     ".previous"			\
+			     :"=r" (tracedata)			\
+			     : "i" (__LINE__), "i" (__FILE__));	\
+		generate_resume_trace(tracedata, user);		\
+	}							\
+} while (0)
+
+#endif /* _ASM_X86_RESUME_TRACE_H */
diff --git a/arch/x86/include/asm/rio.h b/arch/x86/include/asm/rio.h
new file mode 100644
index 0000000..97bab63
--- /dev/null
+++ b/arch/x86/include/asm/rio.h
@@ -0,0 +1,63 @@
+/*
+ * Derived from include/asm-x86/mach-summit/mach_mpparse.h
+ *          and include/asm-x86/mach-default/bios_ebda.h
+ *
+ * Author: Laurent Vivier <Laurent.Vivier@bull.net>
+ */
+
+#ifndef _ASM_X86_RIO_H
+#define _ASM_X86_RIO_H
+
+#define RIO_TABLE_VERSION	3
+
+struct rio_table_hdr {
+	u8 version;		/* Version number of this data structure  */
+	u8 num_scal_dev;	/* # of Scalability devices               */
+	u8 num_rio_dev;		/* # of RIO I/O devices                   */
+} __attribute__((packed));
+
+struct scal_detail {
+	u8 node_id;		/* Scalability Node ID                    */
+	u32 CBAR;		/* Address of 1MB register space          */
+	u8 port0node;		/* Node ID port connected to: 0xFF=None   */
+	u8 port0port;		/* Port num port connected to: 0,1,2, or  */
+				/* 0xFF=None                              */
+	u8 port1node;		/* Node ID port connected to: 0xFF = None */
+	u8 port1port;		/* Port num port connected to: 0,1,2, or  */
+				/* 0xFF=None                              */
+	u8 port2node;		/* Node ID port connected to: 0xFF = None */
+	u8 port2port;		/* Port num port connected to: 0,1,2, or  */
+				/* 0xFF=None                              */
+	u8 chassis_num;		/* 1 based Chassis number (1 = boot node) */
+} __attribute__((packed));
+
+struct rio_detail {
+	u8 node_id;		/* RIO Node ID                            */
+	u32 BBAR;		/* Address of 1MB register space          */
+	u8 type;		/* Type of device                         */
+	u8 owner_id;		/* Node ID of Hurricane that owns this    */
+				/* node                                   */
+	u8 port0node;		/* Node ID port connected to: 0xFF=None   */
+	u8 port0port;		/* Port num port connected to: 0,1,2, or  */
+				/* 0xFF=None                              */
+	u8 port1node;		/* Node ID port connected to: 0xFF=None   */
+	u8 port1port;		/* Port num port connected to: 0,1,2, or  */
+				/* 0xFF=None                              */
+	u8 first_slot;		/* Lowest slot number below this Calgary  */
+	u8 status;		/* Bit 0 = 1 : the XAPIC is used          */
+				/*       = 0 : the XAPIC is not used, ie: */
+				/*            ints fwded to another XAPIC */
+				/*           Bits1:7 Reserved             */
+	u8 WP_index;		/* instance index - lower ones have       */
+				/*     lower slot numbers/PCI bus numbers */
+	u8 chassis_num;		/* 1 based Chassis number                 */
+} __attribute__((packed));
+
+enum {
+	HURR_SCALABILTY	= 0,	/* Hurricane Scalability info */
+	HURR_RIOIB	= 2,	/* Hurricane RIOIB info       */
+	COMPAT_CALGARY	= 4,	/* Compatibility Calgary      */
+	ALT_CALGARY	= 5,	/* Second Planar Calgary      */
+};
+
+#endif /* _ASM_X86_RIO_H */
diff --git a/include/asm-x86/rtc.h b/arch/x86/include/asm/rtc.h
similarity index 100%
rename from include/asm-x86/rtc.h
rename to arch/x86/include/asm/rtc.h
diff --git a/arch/x86/include/asm/rwlock.h b/arch/x86/include/asm/rwlock.h
new file mode 100644
index 0000000..6a8c0d6
--- /dev/null
+++ b/arch/x86/include/asm/rwlock.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_X86_RWLOCK_H
+#define _ASM_X86_RWLOCK_H
+
+#define RW_LOCK_BIAS		 0x01000000
+
+/* Actual code is in asm/spinlock.h or in arch/x86/lib/rwlock.S */
+
+#endif /* _ASM_X86_RWLOCK_H */
diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h
new file mode 100644
index 0000000..ca7517d
--- /dev/null
+++ b/arch/x86/include/asm/rwsem.h
@@ -0,0 +1,265 @@
+/* rwsem.h: R/W semaphores implemented using XADD/CMPXCHG for i486+
+ *
+ * Written by David Howells (dhowells@redhat.com).
+ *
+ * Derived from asm-x86/semaphore.h
+ *
+ *
+ * The MSW of the count is the negated number of active writers and waiting
+ * lockers, and the LSW is the total number of active locks
+ *
+ * The lock count is initialized to 0 (no active and no waiting lockers).
+ *
+ * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case of an
+ * uncontended lock. This can be determined because XADD returns the old value.
+ * Readers increment by 1 and see a positive value when uncontended, negative
+ * if there are writers (and maybe) readers waiting (in which case it goes to
+ * sleep).
+ *
+ * The value of WAITING_BIAS supports up to 32766 waiting processes. This can
+ * be extended to 65534 by manually checking the whole MSW rather than relying
+ * on the S flag.
+ *
+ * The value of ACTIVE_BIAS supports up to 65535 active processes.
+ *
+ * This should be totally fair - if anything is waiting, a process that wants a
+ * lock will go to the back of the queue. When the currently active lock is
+ * released, if there's a writer at the front of the queue, then that and only
+ * that will be woken up; if there's a bunch of consequtive readers at the
+ * front, then they'll all be woken up, but no other readers will be.
+ */
+
+#ifndef _ASM_X86_RWSEM_H
+#define _ASM_X86_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/lockdep.h>
+
+struct rwsem_waiter;
+
+extern asmregparm struct rw_semaphore *
+ rwsem_down_read_failed(struct rw_semaphore *sem);
+extern asmregparm struct rw_semaphore *
+ rwsem_down_write_failed(struct rw_semaphore *sem);
+extern asmregparm struct rw_semaphore *
+ rwsem_wake(struct rw_semaphore *);
+extern asmregparm struct rw_semaphore *
+ rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+/*
+ * the semaphore definition
+ */
+
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		(-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+struct rw_semaphore {
+	signed long		count;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map dep_map;
+#endif
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
+
+#define __RWSEM_INITIALIZER(name)				\
+{								\
+	RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
+	LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) \
+}
+
+#define DECLARE_RWSEM(name)					\
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_rwsem(sem)						\
+do {								\
+	static struct lock_class_key __key;			\
+								\
+	__init_rwsem((sem), #sem, &__key);			\
+} while (0)
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	asm volatile("# beginning down_read\n\t"
+		     LOCK_PREFIX "  incl      (%%eax)\n\t"
+		     /* adds 0x00000001, returns the old value */
+		     "  jns        1f\n"
+		     "  call call_rwsem_down_read_failed\n"
+		     "1:\n\t"
+		     "# ending down_read\n\t"
+		     : "+m" (sem->count)
+		     : "a" (sem)
+		     : "memory", "cc");
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	__s32 result, tmp;
+	asm volatile("# beginning __down_read_trylock\n\t"
+		     "  movl      %0,%1\n\t"
+		     "1:\n\t"
+		     "  movl	     %1,%2\n\t"
+		     "  addl      %3,%2\n\t"
+		     "  jle	     2f\n\t"
+		     LOCK_PREFIX "  cmpxchgl  %2,%0\n\t"
+		     "  jnz	     1b\n\t"
+		     "2:\n\t"
+		     "# ending __down_read_trylock\n\t"
+		     : "+m" (sem->count), "=&a" (result), "=&r" (tmp)
+		     : "i" (RWSEM_ACTIVE_READ_BIAS)
+		     : "memory", "cc");
+	return result >= 0 ? 1 : 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+	int tmp;
+
+	tmp = RWSEM_ACTIVE_WRITE_BIAS;
+	asm volatile("# beginning down_write\n\t"
+		     LOCK_PREFIX "  xadd      %%edx,(%%eax)\n\t"
+		     /* subtract 0x0000ffff, returns the old value */
+		     "  testl     %%edx,%%edx\n\t"
+		     /* was the count 0 before? */
+		     "  jz        1f\n"
+		     "  call call_rwsem_down_write_failed\n"
+		     "1:\n"
+		     "# ending down_write"
+		     : "+m" (sem->count), "=d" (tmp)
+		     : "a" (sem), "1" (tmp)
+		     : "memory", "cc");
+}
+
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	__down_write_nested(sem, 0);
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	signed long ret = cmpxchg(&sem->count,
+				  RWSEM_UNLOCKED_VALUE,
+				  RWSEM_ACTIVE_WRITE_BIAS);
+	if (ret == RWSEM_UNLOCKED_VALUE)
+		return 1;
+	return 0;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	__s32 tmp = -RWSEM_ACTIVE_READ_BIAS;
+	asm volatile("# beginning __up_read\n\t"
+		     LOCK_PREFIX "  xadd      %%edx,(%%eax)\n\t"
+		     /* subtracts 1, returns the old value */
+		     "  jns        1f\n\t"
+		     "  call call_rwsem_wake\n"
+		     "1:\n"
+		     "# ending __up_read\n"
+		     : "+m" (sem->count), "=d" (tmp)
+		     : "a" (sem), "1" (tmp)
+		     : "memory", "cc");
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	asm volatile("# beginning __up_write\n\t"
+		     "  movl      %2,%%edx\n\t"
+		     LOCK_PREFIX "  xaddl     %%edx,(%%eax)\n\t"
+		     /* tries to transition
+			0xffff0001 -> 0x00000000 */
+		     "  jz       1f\n"
+		     "  call call_rwsem_wake\n"
+		     "1:\n\t"
+		     "# ending __up_write\n"
+		     : "+m" (sem->count)
+		     : "a" (sem), "i" (-RWSEM_ACTIVE_WRITE_BIAS)
+		     : "memory", "cc", "edx");
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	asm volatile("# beginning __downgrade_write\n\t"
+		     LOCK_PREFIX "  addl      %2,(%%eax)\n\t"
+		     /* transitions 0xZZZZ0001 -> 0xYYYY0001 */
+		     "  jns       1f\n\t"
+		     "  call call_rwsem_downgrade_wake\n"
+		     "1:\n\t"
+		     "# ending __downgrade_write\n"
+		     : "+m" (sem->count)
+		     : "a" (sem), "i" (-RWSEM_WAITING_BIAS)
+		     : "memory", "cc");
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	asm volatile(LOCK_PREFIX "addl %1,%0"
+		     : "+m" (sem->count)
+		     : "ir" (delta));
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	int tmp = delta;
+
+	asm volatile(LOCK_PREFIX "xadd %0,%1"
+		     : "+r" (tmp), "+m" (sem->count)
+		     : : "memory");
+
+	return tmp + delta;
+}
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_X86_RWSEM_H */
diff --git a/arch/x86/include/asm/scatterlist.h b/arch/x86/include/asm/scatterlist.h
new file mode 100644
index 0000000..263d397
--- /dev/null
+++ b/arch/x86/include/asm/scatterlist.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_X86_SCATTERLIST_H
+#define _ASM_X86_SCATTERLIST_H
+
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;
+	unsigned int	length;
+	dma_addr_t	dma_address;
+	unsigned int	dma_length;
+};
+
+#define ARCH_HAS_SG_CHAIN
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#ifdef CONFIG_X86_32
+# define sg_dma_len(sg)		((sg)->length)
+#else
+# define sg_dma_len(sg)		((sg)->dma_length)
+#endif
+
+#endif /* _ASM_X86_SCATTERLIST_H */
diff --git a/include/asm-x86/seccomp.h b/arch/x86/include/asm/seccomp.h
similarity index 100%
rename from include/asm-x86/seccomp.h
rename to arch/x86/include/asm/seccomp.h
diff --git a/arch/x86/include/asm/seccomp_32.h b/arch/x86/include/asm/seccomp_32.h
new file mode 100644
index 0000000..a6ad87b
--- /dev/null
+++ b/arch/x86/include/asm/seccomp_32.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_X86_SECCOMP_32_H
+#define _ASM_X86_SECCOMP_32_H
+
+#include <linux/thread_info.h>
+
+#ifdef TIF_32BIT
+#error "unexpected TIF_32BIT on i386"
+#endif
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_sigreturn
+
+#endif /* _ASM_X86_SECCOMP_32_H */
diff --git a/arch/x86/include/asm/seccomp_64.h b/arch/x86/include/asm/seccomp_64.h
new file mode 100644
index 0000000..4171bb7
--- /dev/null
+++ b/arch/x86/include/asm/seccomp_64.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_X86_SECCOMP_64_H
+#define _ASM_X86_SECCOMP_64_H
+
+#include <linux/thread_info.h>
+
+#ifdef TIF_32BIT
+#error "unexpected TIF_32BIT on x86_64"
+#else
+#define TIF_32BIT TIF_IA32
+#endif
+
+#include <linux/unistd.h>
+#include <asm/ia32_unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#define __NR_seccomp_read_32 __NR_ia32_read
+#define __NR_seccomp_write_32 __NR_ia32_write
+#define __NR_seccomp_exit_32 __NR_ia32_exit
+#define __NR_seccomp_sigreturn_32 __NR_ia32_sigreturn
+
+#endif /* _ASM_X86_SECCOMP_64_H */
diff --git a/include/asm-x86/sections.h b/arch/x86/include/asm/sections.h
similarity index 100%
rename from include/asm-x86/sections.h
rename to arch/x86/include/asm/sections.h
diff --git a/arch/x86/include/asm/segment.h b/arch/x86/include/asm/segment.h
new file mode 100644
index 0000000..1dc1b51
--- /dev/null
+++ b/arch/x86/include/asm/segment.h
@@ -0,0 +1,209 @@
+#ifndef _ASM_X86_SEGMENT_H
+#define _ASM_X86_SEGMENT_H
+
+/* Constructor for a conventional segment GDT (or LDT) entry */
+/* This is a macro so it can be used in initializers */
+#define GDT_ENTRY(flags, base, limit)			\
+	((((base)  & 0xff000000ULL) << (56-24)) |	\
+	 (((flags) & 0x0000f0ffULL) << 40) |		\
+	 (((limit) & 0x000f0000ULL) << (48-16)) |	\
+	 (((base)  & 0x00ffffffULL) << 16) |		\
+	 (((limit) & 0x0000ffffULL)))
+
+/* Simple and small GDT entries for booting only */
+
+#define GDT_ENTRY_BOOT_CS	2
+#define __BOOT_CS		(GDT_ENTRY_BOOT_CS * 8)
+
+#define GDT_ENTRY_BOOT_DS	(GDT_ENTRY_BOOT_CS + 1)
+#define __BOOT_DS		(GDT_ENTRY_BOOT_DS * 8)
+
+#define GDT_ENTRY_BOOT_TSS	(GDT_ENTRY_BOOT_CS + 2)
+#define __BOOT_TSS		(GDT_ENTRY_BOOT_TSS * 8)
+
+#ifdef CONFIG_X86_32
+/*
+ * The layout of the per-CPU GDT under Linux:
+ *
+ *   0 - null
+ *   1 - reserved
+ *   2 - reserved
+ *   3 - reserved
+ *
+ *   4 - unused			<==== new cacheline
+ *   5 - unused
+ *
+ *  ------- start of TLS (Thread-Local Storage) segments:
+ *
+ *   6 - TLS segment #1			[ glibc's TLS segment ]
+ *   7 - TLS segment #2			[ Wine's %fs Win32 segment ]
+ *   8 - TLS segment #3
+ *   9 - reserved
+ *  10 - reserved
+ *  11 - reserved
+ *
+ *  ------- start of kernel segments:
+ *
+ *  12 - kernel code segment		<==== new cacheline
+ *  13 - kernel data segment
+ *  14 - default user CS
+ *  15 - default user DS
+ *  16 - TSS
+ *  17 - LDT
+ *  18 - PNPBIOS support (16->32 gate)
+ *  19 - PNPBIOS support
+ *  20 - PNPBIOS support
+ *  21 - PNPBIOS support
+ *  22 - PNPBIOS support
+ *  23 - APM BIOS support
+ *  24 - APM BIOS support
+ *  25 - APM BIOS support
+ *
+ *  26 - ESPFIX small SS
+ *  27 - per-cpu			[ offset to per-cpu data area ]
+ *  28 - unused
+ *  29 - unused
+ *  30 - unused
+ *  31 - TSS for double fault handler
+ */
+#define GDT_ENTRY_TLS_MIN	6
+#define GDT_ENTRY_TLS_MAX 	(GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
+
+#define GDT_ENTRY_DEFAULT_USER_CS	14
+
+#define GDT_ENTRY_DEFAULT_USER_DS	15
+
+#define GDT_ENTRY_KERNEL_BASE	12
+
+#define GDT_ENTRY_KERNEL_CS		(GDT_ENTRY_KERNEL_BASE + 0)
+
+#define GDT_ENTRY_KERNEL_DS		(GDT_ENTRY_KERNEL_BASE + 1)
+
+#define GDT_ENTRY_TSS			(GDT_ENTRY_KERNEL_BASE + 4)
+#define GDT_ENTRY_LDT			(GDT_ENTRY_KERNEL_BASE + 5)
+
+#define GDT_ENTRY_PNPBIOS_BASE		(GDT_ENTRY_KERNEL_BASE + 6)
+#define GDT_ENTRY_APMBIOS_BASE		(GDT_ENTRY_KERNEL_BASE + 11)
+
+#define GDT_ENTRY_ESPFIX_SS		(GDT_ENTRY_KERNEL_BASE + 14)
+#define __ESPFIX_SS (GDT_ENTRY_ESPFIX_SS * 8)
+
+#define GDT_ENTRY_PERCPU			(GDT_ENTRY_KERNEL_BASE + 15)
+#ifdef CONFIG_SMP
+#define __KERNEL_PERCPU (GDT_ENTRY_PERCPU * 8)
+#else
+#define __KERNEL_PERCPU 0
+#endif
+
+#define GDT_ENTRY_DOUBLEFAULT_TSS	31
+
+/*
+ * The GDT has 32 entries
+ */
+#define GDT_ENTRIES 32
+
+/* The PnP BIOS entries in the GDT */
+#define GDT_ENTRY_PNPBIOS_CS32		(GDT_ENTRY_PNPBIOS_BASE + 0)
+#define GDT_ENTRY_PNPBIOS_CS16		(GDT_ENTRY_PNPBIOS_BASE + 1)
+#define GDT_ENTRY_PNPBIOS_DS		(GDT_ENTRY_PNPBIOS_BASE + 2)
+#define GDT_ENTRY_PNPBIOS_TS1		(GDT_ENTRY_PNPBIOS_BASE + 3)
+#define GDT_ENTRY_PNPBIOS_TS2		(GDT_ENTRY_PNPBIOS_BASE + 4)
+
+/* The PnP BIOS selectors */
+#define PNP_CS32   (GDT_ENTRY_PNPBIOS_CS32 * 8)	/* segment for calling fn */
+#define PNP_CS16   (GDT_ENTRY_PNPBIOS_CS16 * 8)	/* code segment for BIOS */
+#define PNP_DS     (GDT_ENTRY_PNPBIOS_DS * 8)	/* data segment for BIOS */
+#define PNP_TS1    (GDT_ENTRY_PNPBIOS_TS1 * 8)	/* transfer data segment */
+#define PNP_TS2    (GDT_ENTRY_PNPBIOS_TS2 * 8)	/* another data segment */
+
+/* Bottom two bits of selector give the ring privilege level */
+#define SEGMENT_RPL_MASK	0x3
+/* Bit 2 is table indicator (LDT/GDT) */
+#define SEGMENT_TI_MASK		0x4
+
+/* User mode is privilege level 3 */
+#define USER_RPL		0x3
+/* LDT segment has TI set, GDT has it cleared */
+#define SEGMENT_LDT		0x4
+#define SEGMENT_GDT		0x0
+
+/*
+ * Matching rules for certain types of segments.
+ */
+
+/* Matches PNP_CS32 and PNP_CS16 (they must be consecutive) */
+#define SEGMENT_IS_PNP_CODE(x)   (((x) & 0xf4) == GDT_ENTRY_PNPBIOS_BASE * 8)
+
+
+#else
+#include <asm/cache.h>
+
+#define GDT_ENTRY_KERNEL32_CS 1
+#define GDT_ENTRY_KERNEL_CS 2
+#define GDT_ENTRY_KERNEL_DS 3
+
+#define __KERNEL32_CS   (GDT_ENTRY_KERNEL32_CS * 8)
+
+/*
+ * we cannot use the same code segment descriptor for user and kernel
+ * -- not even in the long flat mode, because of different DPL /kkeil
+ * The segment offset needs to contain a RPL. Grr. -AK
+ * GDT layout to get 64bit syscall right (sysret hardcodes gdt offsets)
+ */
+#define GDT_ENTRY_DEFAULT_USER32_CS 4
+#define GDT_ENTRY_DEFAULT_USER_DS 5
+#define GDT_ENTRY_DEFAULT_USER_CS 6
+#define __USER32_CS   (GDT_ENTRY_DEFAULT_USER32_CS * 8 + 3)
+#define __USER32_DS	__USER_DS
+
+#define GDT_ENTRY_TSS 8	/* needs two entries */
+#define GDT_ENTRY_LDT 10 /* needs two entries */
+#define GDT_ENTRY_TLS_MIN 12
+#define GDT_ENTRY_TLS_MAX 14
+
+#define GDT_ENTRY_PER_CPU 15	/* Abused to load per CPU data from limit */
+#define __PER_CPU_SEG	(GDT_ENTRY_PER_CPU * 8 + 3)
+
+/* TLS indexes for 64bit - hardcoded in arch_prctl */
+#define FS_TLS 0
+#define GS_TLS 1
+
+#define GS_TLS_SEL ((GDT_ENTRY_TLS_MIN+GS_TLS)*8 + 3)
+#define FS_TLS_SEL ((GDT_ENTRY_TLS_MIN+FS_TLS)*8 + 3)
+
+#define GDT_ENTRIES 16
+
+#endif
+
+#define __KERNEL_CS	(GDT_ENTRY_KERNEL_CS * 8)
+#define __KERNEL_DS	(GDT_ENTRY_KERNEL_DS * 8)
+#define __USER_DS     (GDT_ENTRY_DEFAULT_USER_DS* 8 + 3)
+#define __USER_CS     (GDT_ENTRY_DEFAULT_USER_CS* 8 + 3)
+#ifndef CONFIG_PARAVIRT
+#define get_kernel_rpl()  0
+#endif
+
+/* User mode is privilege level 3 */
+#define USER_RPL		0x3
+/* LDT segment has TI set, GDT has it cleared */
+#define SEGMENT_LDT		0x4
+#define SEGMENT_GDT		0x0
+
+/* Bottom two bits of selector give the ring privilege level */
+#define SEGMENT_RPL_MASK	0x3
+/* Bit 2 is table indicator (LDT/GDT) */
+#define SEGMENT_TI_MASK		0x4
+
+#define IDT_ENTRIES 256
+#define NUM_EXCEPTION_VECTORS 32
+#define GDT_SIZE (GDT_ENTRIES * 8)
+#define GDT_ENTRY_TLS_ENTRIES 3
+#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+extern const char early_idt_handlers[NUM_EXCEPTION_VECTORS][10];
+#endif
+#endif
+
+#endif /* _ASM_X86_SEGMENT_H */
diff --git a/arch/x86/include/asm/sembuf.h b/arch/x86/include/asm/sembuf.h
new file mode 100644
index 0000000..ee50c80
--- /dev/null
+++ b/arch/x86/include/asm/sembuf.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_X86_SEMBUF_H
+#define _ASM_X86_SEMBUF_H
+
+/*
+ * The semid64_ds structure for x86 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+struct semid64_ds {
+	struct ipc64_perm sem_perm;	/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;	/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;	/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;	/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_X86_SEMBUF_H */
diff --git a/arch/x86/include/asm/serial.h b/arch/x86/include/asm/serial.h
new file mode 100644
index 0000000..628c801
--- /dev/null
+++ b/arch/x86/include/asm/serial.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_X86_SERIAL_H
+#define _ASM_X86_SERIAL_H
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#define SERIAL_PORT_DFNS			\
+	/* UART CLK   PORT IRQ     FLAGS        */			\
+	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
+	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
+	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
+	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
+
+#endif /* _ASM_X86_SERIAL_H */
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
new file mode 100644
index 0000000..f12d372
--- /dev/null
+++ b/arch/x86/include/asm/setup.h
@@ -0,0 +1,105 @@
+#ifndef _ASM_X86_SETUP_H
+#define _ASM_X86_SETUP_H
+
+#define COMMAND_LINE_SIZE 2048
+
+#ifndef __ASSEMBLY__
+
+/* Interrupt control for vSMPowered x86_64 systems */
+void vsmp_init(void);
+
+#ifdef CONFIG_X86_VISWS
+extern void visws_early_detect(void);
+extern int is_visws_box(void);
+#else
+static inline void visws_early_detect(void) { }
+static inline int is_visws_box(void) { return 0; }
+#endif
+
+/*
+ * Any setup quirks to be performed?
+ */
+struct mpc_config_processor;
+struct mpc_config_bus;
+struct mp_config_oemtable;
+struct x86_quirks {
+	int (*arch_pre_time_init)(void);
+	int (*arch_time_init)(void);
+	int (*arch_pre_intr_init)(void);
+	int (*arch_intr_init)(void);
+	int (*arch_trap_init)(void);
+	char * (*arch_memory_setup)(void);
+	int (*mach_get_smp_config)(unsigned int early);
+	int (*mach_find_smp_config)(unsigned int reserve);
+
+	int *mpc_record;
+	int (*mpc_apic_id)(struct mpc_config_processor *m);
+	void (*mpc_oem_bus_info)(struct mpc_config_bus *m, char *name);
+	void (*mpc_oem_pci_bus)(struct mpc_config_bus *m);
+	void (*smp_read_mpc_oem)(struct mp_config_oemtable *oemtable,
+                                    unsigned short oemsize);
+	int (*setup_ioapic_ids)(void);
+};
+
+extern struct x86_quirks *x86_quirks;
+extern unsigned long saved_video_mode;
+
+#ifndef CONFIG_PARAVIRT
+#define paravirt_post_allocator_init()	do {} while (0)
+#endif
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#ifdef __i386__
+
+#include <linux/pfn.h>
+/*
+ * Reserved space for vmalloc and iomap - defined in asm/page.h
+ */
+#define MAXMEM_PFN	PFN_DOWN(MAXMEM)
+#define MAX_NONPAE_PFN	(1 << 20)
+
+#endif /* __i386__ */
+
+#define PARAM_SIZE 4096		/* sizeof(struct boot_params) */
+
+#define OLD_CL_MAGIC		0xA33F
+#define OLD_CL_ADDRESS		0x020	/* Relative to real mode data */
+#define NEW_CL_POINTER		0x228	/* Relative to real mode data */
+
+#ifndef __ASSEMBLY__
+#include <asm/bootparam.h>
+
+#ifndef _SETUP
+
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+extern struct boot_params boot_params;
+
+/*
+ * Do NOT EVER look at the BIOS memory size location.
+ * It does not work on many machines.
+ */
+#define LOWMEMSIZE()	(0x9f000)
+
+#ifdef __i386__
+
+void __init i386_start_kernel(void);
+extern void probe_roms(void);
+
+extern unsigned long init_pg_tables_start;
+extern unsigned long init_pg_tables_end;
+
+#else
+void __init x86_64_init_pda(void);
+void __init x86_64_start_kernel(char *real_mode);
+void __init x86_64_start_reservations(char *real_mode_data);
+
+#endif /* __i386__ */
+#endif /* _SETUP */
+#endif /* __ASSEMBLY__ */
+#endif  /*  __KERNEL__  */
+
+#endif /* _ASM_X86_SETUP_H */
diff --git a/arch/x86/include/asm/shmbuf.h b/arch/x86/include/asm/shmbuf.h
new file mode 100644
index 0000000..b51413b
--- /dev/null
+++ b/arch/x86/include/asm/shmbuf.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_X86_SHMBUF_H
+#define _ASM_X86_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for x86 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space on 32 bit is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ *
+ * Pad space on 64 bit is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+#ifdef __i386__
+	unsigned long		__unused1;
+#endif
+	__kernel_time_t		shm_dtime;	/* last detach time */
+#ifdef __i386__
+	unsigned long		__unused2;
+#endif
+	__kernel_time_t		shm_ctime;	/* last change time */
+#ifdef __i386__
+	unsigned long		__unused3;
+#endif
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_X86_SHMBUF_H */
diff --git a/arch/x86/include/asm/shmparam.h b/arch/x86/include/asm/shmparam.h
new file mode 100644
index 0000000..0880cf0
--- /dev/null
+++ b/arch/x86/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_X86_SHMPARAM_H
+#define _ASM_X86_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE	 /* attach addr a multiple of this */
+
+#endif /* _ASM_X86_SHMPARAM_H */
diff --git a/arch/x86/include/asm/sigcontext.h b/arch/x86/include/asm/sigcontext.h
new file mode 100644
index 0000000..0afcb5e
--- /dev/null
+++ b/arch/x86/include/asm/sigcontext.h
@@ -0,0 +1,284 @@
+#ifndef _ASM_X86_SIGCONTEXT_H
+#define _ASM_X86_SIGCONTEXT_H
+
+#include <linux/compiler.h>
+#include <asm/types.h>
+
+#define FP_XSTATE_MAGIC1	0x46505853U
+#define FP_XSTATE_MAGIC2	0x46505845U
+#define FP_XSTATE_MAGIC2_SIZE	sizeof(FP_XSTATE_MAGIC2)
+
+/*
+ * bytes 464..511 in the current 512byte layout of fxsave/fxrstor frame
+ * are reserved for SW usage. On cpu's supporting xsave/xrstor, these bytes
+ * are used to extended the fpstate pointer in the sigcontext, which now
+ * includes the extended state information along with fpstate information.
+ *
+ * Presence of FP_XSTATE_MAGIC1 at the beginning of this SW reserved
+ * area and FP_XSTATE_MAGIC2 at the end of memory layout
+ * (extended_size - FP_XSTATE_MAGIC2_SIZE) indicates the presence of the
+ * extended state information in the memory layout pointed by the fpstate
+ * pointer in sigcontext.
+ */
+struct _fpx_sw_bytes {
+	__u32 magic1;		/* FP_XSTATE_MAGIC1 */
+	__u32 extended_size;	/* total size of the layout referred by
+				 * fpstate pointer in the sigcontext.
+				 */
+	__u64 xstate_bv;
+				/* feature bit mask (including fp/sse/extended
+				 * state) that is present in the memory
+				 * layout.
+				 */
+	__u32 xstate_size;	/* actual xsave state size, based on the
+				 * features saved in the layout.
+				 * 'extended_size' will be greater than
+				 * 'xstate_size'.
+				 */
+	__u32 padding[7];	/*  for future use. */
+};
+
+#ifdef __i386__
+/*
+ * As documented in the iBCS2 standard..
+ *
+ * The first part of "struct _fpstate" is just the normal i387
+ * hardware setup, the extra "status" word is used to save the
+ * coprocessor status word before entering the handler.
+ *
+ * Pentium III FXSR, SSE support
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ *
+ * The FPU state data structure has had to grow to accommodate the
+ * extended FPU state required by the Streaming SIMD Extensions.
+ * There is no documented standard to accomplish this at the moment.
+ */
+struct _fpreg {
+	unsigned short significand[4];
+	unsigned short exponent;
+};
+
+struct _fpxreg {
+	unsigned short significand[4];
+	unsigned short exponent;
+	unsigned short padding[3];
+};
+
+struct _xmmreg {
+	unsigned long element[4];
+};
+
+struct _fpstate {
+	/* Regular FPU environment */
+	unsigned long	cw;
+	unsigned long	sw;
+	unsigned long	tag;
+	unsigned long	ipoff;
+	unsigned long	cssel;
+	unsigned long	dataoff;
+	unsigned long	datasel;
+	struct _fpreg	_st[8];
+	unsigned short	status;
+	unsigned short	magic;		/* 0xffff = regular FPU data only */
+
+	/* FXSR FPU environment */
+	unsigned long	_fxsr_env[6];	/* FXSR FPU env is ignored */
+	unsigned long	mxcsr;
+	unsigned long	reserved;
+	struct _fpxreg	_fxsr_st[8];	/* FXSR FPU reg data is ignored */
+	struct _xmmreg	_xmm[8];
+	unsigned long	padding1[44];
+
+	union {
+		unsigned long	padding2[12];
+		struct _fpx_sw_bytes sw_reserved; /* represents the extended
+						   * state info */
+	};
+};
+
+#define X86_FXSR_MAGIC		0x0000
+
+#ifdef __KERNEL__
+struct sigcontext {
+	unsigned short gs, __gsh;
+	unsigned short fs, __fsh;
+	unsigned short es, __esh;
+	unsigned short ds, __dsh;
+	unsigned long di;
+	unsigned long si;
+	unsigned long bp;
+	unsigned long sp;
+	unsigned long bx;
+	unsigned long dx;
+	unsigned long cx;
+	unsigned long ax;
+	unsigned long trapno;
+	unsigned long err;
+	unsigned long ip;
+	unsigned short cs, __csh;
+	unsigned long flags;
+	unsigned long sp_at_signal;
+	unsigned short ss, __ssh;
+
+	/*
+	 * fpstate is really (struct _fpstate *) or (struct _xstate *)
+	 * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
+	 * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
+	 * of extended memory layout. See comments at the defintion of
+	 * (struct _fpx_sw_bytes)
+	 */
+	void __user *fpstate;		/* zero when no FPU/extended context */
+	unsigned long oldmask;
+	unsigned long cr2;
+};
+#else /* __KERNEL__ */
+/*
+ * User-space might still rely on the old definition:
+ */
+struct sigcontext {
+	unsigned short gs, __gsh;
+	unsigned short fs, __fsh;
+	unsigned short es, __esh;
+	unsigned short ds, __dsh;
+	unsigned long edi;
+	unsigned long esi;
+	unsigned long ebp;
+	unsigned long esp;
+	unsigned long ebx;
+	unsigned long edx;
+	unsigned long ecx;
+	unsigned long eax;
+	unsigned long trapno;
+	unsigned long err;
+	unsigned long eip;
+	unsigned short cs, __csh;
+	unsigned long eflags;
+	unsigned long esp_at_signal;
+	unsigned short ss, __ssh;
+	struct _fpstate __user *fpstate;
+	unsigned long oldmask;
+	unsigned long cr2;
+};
+#endif /* !__KERNEL__ */
+
+#else /* __i386__ */
+
+/* FXSAVE frame */
+/* Note: reserved1/2 may someday contain valuable data. Always save/restore
+   them when you change signal frames. */
+struct _fpstate {
+	__u16	cwd;
+	__u16	swd;
+	__u16	twd;		/* Note this is not the same as the
+				   32bit/x87/FSAVE twd */
+	__u16	fop;
+	__u64	rip;
+	__u64	rdp;
+	__u32	mxcsr;
+	__u32	mxcsr_mask;
+	__u32	st_space[32];	/* 8*16 bytes for each FP-reg */
+	__u32	xmm_space[64];	/* 16*16 bytes for each XMM-reg  */
+	__u32	reserved2[12];
+	union {
+		__u32	reserved3[12];
+		struct _fpx_sw_bytes sw_reserved; /* represents the extended
+						   * state information */
+	};
+};
+
+#ifdef __KERNEL__
+struct sigcontext {
+	unsigned long r8;
+	unsigned long r9;
+	unsigned long r10;
+	unsigned long r11;
+	unsigned long r12;
+	unsigned long r13;
+	unsigned long r14;
+	unsigned long r15;
+	unsigned long di;
+	unsigned long si;
+	unsigned long bp;
+	unsigned long bx;
+	unsigned long dx;
+	unsigned long ax;
+	unsigned long cx;
+	unsigned long sp;
+	unsigned long ip;
+	unsigned long flags;
+	unsigned short cs;
+	unsigned short gs;
+	unsigned short fs;
+	unsigned short __pad0;
+	unsigned long err;
+	unsigned long trapno;
+	unsigned long oldmask;
+	unsigned long cr2;
+
+	/*
+	 * fpstate is really (struct _fpstate *) or (struct _xstate *)
+	 * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
+	 * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
+	 * of extended memory layout. See comments at the defintion of
+	 * (struct _fpx_sw_bytes)
+	 */
+	void __user *fpstate;		/* zero when no FPU/extended context */
+	unsigned long reserved1[8];
+};
+#else /* __KERNEL__ */
+/*
+ * User-space might still rely on the old definition:
+ */
+struct sigcontext {
+	unsigned long r8;
+	unsigned long r9;
+	unsigned long r10;
+	unsigned long r11;
+	unsigned long r12;
+	unsigned long r13;
+	unsigned long r14;
+	unsigned long r15;
+	unsigned long rdi;
+	unsigned long rsi;
+	unsigned long rbp;
+	unsigned long rbx;
+	unsigned long rdx;
+	unsigned long rax;
+	unsigned long rcx;
+	unsigned long rsp;
+	unsigned long rip;
+	unsigned long eflags;		/* RFLAGS */
+	unsigned short cs;
+	unsigned short gs;
+	unsigned short fs;
+	unsigned short __pad0;
+	unsigned long err;
+	unsigned long trapno;
+	unsigned long oldmask;
+	unsigned long cr2;
+	struct _fpstate __user *fpstate;	/* zero when no FPU context */
+	unsigned long reserved1[8];
+};
+#endif /* !__KERNEL__ */
+
+#endif /* !__i386__ */
+
+struct _xsave_hdr {
+	__u64 xstate_bv;
+	__u64 reserved1[2];
+	__u64 reserved2[5];
+};
+
+/*
+ * Extended state pointed by the fpstate pointer in the sigcontext.
+ * In addition to the fpstate, information encoded in the xstate_hdr
+ * indicates the presence of other extended state information
+ * supported by the processor and OS.
+ */
+struct _xstate {
+	struct _fpstate fpstate;
+	struct _xsave_hdr xstate_hdr;
+	/* new processor state extensions go here */
+};
+
+#endif /* _ASM_X86_SIGCONTEXT_H */
diff --git a/arch/x86/include/asm/sigcontext32.h b/arch/x86/include/asm/sigcontext32.h
new file mode 100644
index 0000000..6126188
--- /dev/null
+++ b/arch/x86/include/asm/sigcontext32.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_X86_SIGCONTEXT32_H
+#define _ASM_X86_SIGCONTEXT32_H
+
+/* signal context for 32bit programs. */
+
+#define X86_FXSR_MAGIC		0x0000
+
+struct _fpreg {
+	unsigned short significand[4];
+	unsigned short exponent;
+};
+
+struct _fpxreg {
+	unsigned short significand[4];
+	unsigned short exponent;
+	unsigned short padding[3];
+};
+
+struct _xmmreg {
+	__u32	element[4];
+};
+
+/* FSAVE frame with extensions */
+struct _fpstate_ia32 {
+	/* Regular FPU environment */
+	__u32 	cw;
+	__u32	sw;
+	__u32	tag;	/* not compatible to 64bit twd */
+	__u32	ipoff;
+	__u32	cssel;
+	__u32	dataoff;
+	__u32	datasel;
+	struct _fpreg	_st[8];
+	unsigned short	status;
+	unsigned short	magic;		/* 0xffff = regular FPU data only */
+
+	/* FXSR FPU environment */
+	__u32	_fxsr_env[6];
+	__u32	mxcsr;
+	__u32	reserved;
+	struct _fpxreg	_fxsr_st[8];
+	struct _xmmreg	_xmm[8];	/* It's actually 16 */
+	__u32	padding[44];
+	union {
+		__u32 padding2[12];
+		struct _fpx_sw_bytes sw_reserved;
+	};
+};
+
+struct sigcontext_ia32 {
+       unsigned short gs, __gsh;
+       unsigned short fs, __fsh;
+       unsigned short es, __esh;
+       unsigned short ds, __dsh;
+       unsigned int di;
+       unsigned int si;
+       unsigned int bp;
+       unsigned int sp;
+       unsigned int bx;
+       unsigned int dx;
+       unsigned int cx;
+       unsigned int ax;
+       unsigned int trapno;
+       unsigned int err;
+       unsigned int ip;
+       unsigned short cs, __csh;
+       unsigned int flags;
+       unsigned int sp_at_signal;
+       unsigned short ss, __ssh;
+       unsigned int fpstate;		/* really (struct _fpstate_ia32 *) */
+       unsigned int oldmask;
+       unsigned int cr2;
+};
+
+#endif /* _ASM_X86_SIGCONTEXT32_H */
diff --git a/arch/x86/include/asm/siginfo.h b/arch/x86/include/asm/siginfo.h
new file mode 100644
index 0000000..fc1aa55
--- /dev/null
+++ b/arch/x86/include/asm/siginfo.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_X86_SIGINFO_H
+#define _ASM_X86_SIGINFO_H
+
+#ifdef __x86_64__
+# define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+#endif
+
+#include <asm-generic/siginfo.h>
+
+#endif /* _ASM_X86_SIGINFO_H */
diff --git a/arch/x86/include/asm/signal.h b/arch/x86/include/asm/signal.h
new file mode 100644
index 0000000..96ac44f
--- /dev/null
+++ b/arch/x86/include/asm/signal.h
@@ -0,0 +1,262 @@
+#ifndef _ASM_X86_SIGNAL_H
+#define _ASM_X86_SIGNAL_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/compiler.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+#include <linux/linkage.h>
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+
+#ifdef __i386__
+# define _NSIG_BPW	32
+#else
+# define _NSIG_BPW	64
+#endif
+
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001u
+#define SA_NOCLDWAIT	0x00000002u
+#define SA_SIGINFO	0x00000004u
+#define SA_ONSTACK	0x08000000u
+#define SA_RESTART	0x10000000u
+#define SA_NODEFER	0x40000000u
+#define SA_RESETHAND	0x80000000u
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef __i386__
+# ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+extern void do_notify_resume(struct pt_regs *, void *, __u32);
+
+# else /* __KERNEL__ */
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+# endif /* ! __KERNEL__ */
+#else /* __i386__ */
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+#endif /* !__i386__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#ifdef __i386__
+
+#define __HAVE_ARCH_SIG_BITOPS
+
+#define sigaddset(set,sig)		    \
+	(__builtin_constant_p(sig)	    \
+	 ? __const_sigaddset((set), (sig))  \
+	 : __gen_sigaddset((set), (sig)))
+
+static inline void __gen_sigaddset(sigset_t *set, int _sig)
+{
+	asm("btsl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc");
+}
+
+static inline void __const_sigaddset(sigset_t *set, int _sig)
+{
+	unsigned long sig = _sig - 1;
+	set->sig[sig / _NSIG_BPW] |= 1 << (sig % _NSIG_BPW);
+}
+
+#define sigdelset(set, sig)		    \
+	(__builtin_constant_p(sig)	    \
+	 ? __const_sigdelset((set), (sig))  \
+	 : __gen_sigdelset((set), (sig)))
+
+
+static inline void __gen_sigdelset(sigset_t *set, int _sig)
+{
+	asm("btrl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc");
+}
+
+static inline void __const_sigdelset(sigset_t *set, int _sig)
+{
+	unsigned long sig = _sig - 1;
+	set->sig[sig / _NSIG_BPW] &= ~(1 << (sig % _NSIG_BPW));
+}
+
+static inline int __const_sigismember(sigset_t *set, int _sig)
+{
+	unsigned long sig = _sig - 1;
+	return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
+}
+
+static inline int __gen_sigismember(sigset_t *set, int _sig)
+{
+	int ret;
+	asm("btl %2,%1\n\tsbbl %0,%0"
+	    : "=r"(ret) : "m"(*set), "Ir"(_sig-1) : "cc");
+	return ret;
+}
+
+#define sigismember(set, sig)			\
+	(__builtin_constant_p(sig)		\
+	 ? __const_sigismember((set), (sig))	\
+	 : __gen_sigismember((set), (sig)))
+
+static inline int sigfindinword(unsigned long word)
+{
+	asm("bsfl %1,%0" : "=r"(word) : "rm"(word) : "cc");
+	return word;
+}
+
+struct pt_regs;
+
+#else /* __i386__ */
+
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#endif /* !__i386__ */
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_SIGNAL_H */
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
new file mode 100644
index 0000000..2766021
--- /dev/null
+++ b/arch/x86/include/asm/smp.h
@@ -0,0 +1,229 @@
+#ifndef _ASM_X86_SMP_H
+#define _ASM_X86_SMP_H
+#ifndef __ASSEMBLY__
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <asm/percpu.h>
+
+/*
+ * We need the APIC definitions automatically as part of 'smp.h'
+ */
+#ifdef CONFIG_X86_LOCAL_APIC
+# include <asm/mpspec.h>
+# include <asm/apic.h>
+# ifdef CONFIG_X86_IO_APIC
+#  include <asm/io_apic.h>
+# endif
+#endif
+#include <asm/pda.h>
+#include <asm/thread_info.h>
+
+extern cpumask_t cpu_callout_map;
+extern cpumask_t cpu_initialized;
+extern cpumask_t cpu_callin_map;
+
+extern void (*mtrr_hook)(void);
+extern void zap_low_mappings(void);
+
+extern int __cpuinit get_local_pda(int cpu);
+
+extern int smp_num_siblings;
+extern unsigned int num_processors;
+extern cpumask_t cpu_initialized;
+
+DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+DECLARE_PER_CPU(cpumask_t, cpu_core_map);
+DECLARE_PER_CPU(u16, cpu_llc_id);
+#ifdef CONFIG_X86_32
+DECLARE_PER_CPU(int, cpu_number);
+#endif
+
+DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid);
+DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);
+
+/* Static state in head.S used to set up a CPU */
+extern struct {
+	void *sp;
+	unsigned short ss;
+} stack_start;
+
+struct smp_ops {
+	void (*smp_prepare_boot_cpu)(void);
+	void (*smp_prepare_cpus)(unsigned max_cpus);
+	void (*smp_cpus_done)(unsigned max_cpus);
+
+	void (*smp_send_stop)(void);
+	void (*smp_send_reschedule)(int cpu);
+
+	int (*cpu_up)(unsigned cpu);
+	int (*cpu_disable)(void);
+	void (*cpu_die)(unsigned int cpu);
+	void (*play_dead)(void);
+
+	void (*send_call_func_ipi)(cpumask_t mask);
+	void (*send_call_func_single_ipi)(int cpu);
+};
+
+/* Globals due to paravirt */
+extern void set_cpu_sibling_map(int cpu);
+
+#ifdef CONFIG_SMP
+#ifndef CONFIG_PARAVIRT
+#define startup_ipi_hook(phys_apicid, start_eip, start_esp) do { } while (0)
+#endif
+extern struct smp_ops smp_ops;
+
+static inline void smp_send_stop(void)
+{
+	smp_ops.smp_send_stop();
+}
+
+static inline void smp_prepare_boot_cpu(void)
+{
+	smp_ops.smp_prepare_boot_cpu();
+}
+
+static inline void smp_prepare_cpus(unsigned int max_cpus)
+{
+	smp_ops.smp_prepare_cpus(max_cpus);
+}
+
+static inline void smp_cpus_done(unsigned int max_cpus)
+{
+	smp_ops.smp_cpus_done(max_cpus);
+}
+
+static inline int __cpu_up(unsigned int cpu)
+{
+	return smp_ops.cpu_up(cpu);
+}
+
+static inline int __cpu_disable(void)
+{
+	return smp_ops.cpu_disable();
+}
+
+static inline void __cpu_die(unsigned int cpu)
+{
+	smp_ops.cpu_die(cpu);
+}
+
+static inline void play_dead(void)
+{
+	smp_ops.play_dead();
+}
+
+static inline void smp_send_reschedule(int cpu)
+{
+	smp_ops.smp_send_reschedule(cpu);
+}
+
+static inline void arch_send_call_function_single_ipi(int cpu)
+{
+	smp_ops.send_call_func_single_ipi(cpu);
+}
+
+static inline void arch_send_call_function_ipi(cpumask_t mask)
+{
+	smp_ops.send_call_func_ipi(mask);
+}
+
+void cpu_disable_common(void);
+void native_smp_prepare_boot_cpu(void);
+void native_smp_prepare_cpus(unsigned int max_cpus);
+void native_smp_cpus_done(unsigned int max_cpus);
+int native_cpu_up(unsigned int cpunum);
+int native_cpu_disable(void);
+void native_cpu_die(unsigned int cpu);
+void native_play_dead(void);
+void play_dead_common(void);
+
+void native_send_call_func_ipi(cpumask_t mask);
+void native_send_call_func_single_ipi(int cpu);
+
+extern void prefill_possible_map(void);
+
+void smp_store_cpu_info(int id);
+#define cpu_physical_id(cpu)	per_cpu(x86_cpu_to_apicid, cpu)
+
+/* We don't mark CPUs online until __cpu_up(), so we need another measure */
+static inline int num_booting_cpus(void)
+{
+	return cpus_weight(cpu_callout_map);
+}
+#else
+static inline void prefill_possible_map(void)
+{
+}
+#endif /* CONFIG_SMP */
+
+extern unsigned disabled_cpus __cpuinitdata;
+
+#ifdef CONFIG_X86_32_SMP
+/*
+ * This function is needed by all SMP systems. It must _always_ be valid
+ * from the initial startup. We map APIC_BASE very early in page_setup(),
+ * so this is correct in the x86 case.
+ */
+#define raw_smp_processor_id() (x86_read_percpu(cpu_number))
+extern int safe_smp_processor_id(void);
+
+#elif defined(CONFIG_X86_64_SMP)
+#define raw_smp_processor_id()	read_pda(cpunumber)
+
+#define stack_smp_processor_id()					\
+({								\
+	struct thread_info *ti;						\
+	__asm__("andq %%rsp,%0; ":"=r" (ti) : "0" (CURRENT_MASK));	\
+	ti->cpu;							\
+})
+#define safe_smp_processor_id()		smp_processor_id()
+
+#else /* !CONFIG_X86_32_SMP && !CONFIG_X86_64_SMP */
+#define cpu_physical_id(cpu)		boot_cpu_physical_apicid
+#define safe_smp_processor_id()		0
+#define stack_smp_processor_id() 	0
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+
+#ifndef CONFIG_X86_64
+static inline int logical_smp_processor_id(void)
+{
+	/* we don't want to mark this access volatile - bad code generation */
+	return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
+}
+
+#include <mach_apicdef.h>
+static inline unsigned int read_apic_id(void)
+{
+	unsigned int reg;
+
+	reg = *(u32 *)(APIC_BASE + APIC_ID);
+
+	return GET_APIC_ID(reg);
+}
+#endif
+
+
+# if defined(APIC_DEFINITION) || defined(CONFIG_X86_64)
+extern int hard_smp_processor_id(void);
+# else
+#include <mach_apicdef.h>
+static inline int hard_smp_processor_id(void)
+{
+	/* we don't want to mark this access volatile - bad code generation */
+	return read_apic_id();
+}
+# endif /* APIC_DEFINITION */
+
+#else /* CONFIG_X86_LOCAL_APIC */
+
+# ifndef CONFIG_SMP
+#  define hard_smp_processor_id()	0
+# endif
+
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_X86_SMP_H */
diff --git a/arch/x86/include/asm/socket.h b/arch/x86/include/asm/socket.h
new file mode 100644
index 0000000..8ab9cc8
--- /dev/null
+++ b/arch/x86/include/asm/socket.h
@@ -0,0 +1,57 @@
+#ifndef _ASM_X86_SOCKET_H
+#define _ASM_X86_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif /* _ASM_X86_SOCKET_H */
diff --git a/arch/x86/include/asm/sockios.h b/arch/x86/include/asm/sockios.h
new file mode 100644
index 0000000..49cc72b
--- /dev/null
+++ b/arch/x86/include/asm/sockios.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_X86_SOCKIOS_H
+#define _ASM_X86_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* _ASM_X86_SOCKIOS_H */
diff --git a/arch/x86/include/asm/sparsemem.h b/arch/x86/include/asm/sparsemem.h
new file mode 100644
index 0000000..be44f7d
--- /dev/null
+++ b/arch/x86/include/asm/sparsemem.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_X86_SPARSEMEM_H
+#define _ASM_X86_SPARSEMEM_H
+
+#ifdef CONFIG_SPARSEMEM
+/*
+ * generic non-linear memory support:
+ *
+ * 1) we will not split memory into more chunks than will fit into the flags
+ *    field of the struct page
+ *
+ * SECTION_SIZE_BITS		2^n: size of each section
+ * MAX_PHYSADDR_BITS		2^n: max size of physical address space
+ * MAX_PHYSMEM_BITS		2^n: how much memory we can have in that space
+ *
+ */
+
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_X86_PAE
+#  define SECTION_SIZE_BITS	29
+#  define MAX_PHYSADDR_BITS	36
+#  define MAX_PHYSMEM_BITS	36
+# else
+#  define SECTION_SIZE_BITS	26
+#  define MAX_PHYSADDR_BITS	32
+#  define MAX_PHYSMEM_BITS	32
+# endif
+#else /* CONFIG_X86_32 */
+# define SECTION_SIZE_BITS	27 /* matt - 128 is convenient right now */
+# define MAX_PHYSADDR_BITS	44
+# define MAX_PHYSMEM_BITS	44
+#endif
+
+#endif /* CONFIG_SPARSEMEM */
+#endif /* _ASM_X86_SPARSEMEM_H */
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
new file mode 100644
index 0000000..d17c919
--- /dev/null
+++ b/arch/x86/include/asm/spinlock.h
@@ -0,0 +1,364 @@
+#ifndef _ASM_X86_SPINLOCK_H
+#define _ASM_X86_SPINLOCK_H
+
+#include <asm/atomic.h>
+#include <asm/rwlock.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <linux/compiler.h>
+#include <asm/paravirt.h>
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ *
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * These are fair FIFO ticket locks, which are currently limited to 256
+ * CPUs.
+ *
+ * (the type definitions are in asm/spinlock_types.h)
+ */
+
+#ifdef CONFIG_X86_32
+# define LOCK_PTR_REG "a"
+# define REG_PTR_MODE "k"
+#else
+# define LOCK_PTR_REG "D"
+# define REG_PTR_MODE "q"
+#endif
+
+#if defined(CONFIG_X86_32) && \
+	(defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE))
+/*
+ * On PPro SMP or if we are using OOSTORE, we use a locked operation to unlock
+ * (PPro errata 66, 92)
+ */
+# define UNLOCK_LOCK_PREFIX LOCK_PREFIX
+#else
+# define UNLOCK_LOCK_PREFIX
+#endif
+
+/*
+ * Ticket locks are conceptually two parts, one indicating the current head of
+ * the queue, and the other indicating the current tail. The lock is acquired
+ * by atomically noting the tail and incrementing it by one (thus adding
+ * ourself to the queue and noting our position), then waiting until the head
+ * becomes equal to the the initial value of the tail.
+ *
+ * We use an xadd covering *both* parts of the lock, to increment the tail and
+ * also load the position of the head, which takes care of memory ordering
+ * issues and should be optimal for the uncontended case. Note the tail must be
+ * in the high part, because a wide xadd increment of the low part would carry
+ * up and contaminate the high part.
+ *
+ * With fewer than 2^8 possible CPUs, we can use x86's partial registers to
+ * save some instructions and make the code more elegant. There really isn't
+ * much between them in performance though, especially as locks are out of line.
+ */
+#if (NR_CPUS < 256)
+#define TICKET_SHIFT 8
+
+static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
+{
+	short inc = 0x0100;
+
+	asm volatile (
+		LOCK_PREFIX "xaddw %w0, %1\n"
+		"1:\t"
+		"cmpb %h0, %b0\n\t"
+		"je 2f\n\t"
+		"rep ; nop\n\t"
+		"movb %1, %b0\n\t"
+		/* don't need lfence here, because loads are in-order */
+		"jmp 1b\n"
+		"2:"
+		: "+Q" (inc), "+m" (lock->slock)
+		:
+		: "memory", "cc");
+}
+
+static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock)
+{
+	int tmp, new;
+
+	asm volatile("movzwl %2, %0\n\t"
+		     "cmpb %h0,%b0\n\t"
+		     "leal 0x100(%" REG_PTR_MODE "0), %1\n\t"
+		     "jne 1f\n\t"
+		     LOCK_PREFIX "cmpxchgw %w1,%2\n\t"
+		     "1:"
+		     "sete %b1\n\t"
+		     "movzbl %b1,%0\n\t"
+		     : "=&a" (tmp), "=&q" (new), "+m" (lock->slock)
+		     :
+		     : "memory", "cc");
+
+	return tmp;
+}
+
+static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock)
+{
+	asm volatile(UNLOCK_LOCK_PREFIX "incb %0"
+		     : "+m" (lock->slock)
+		     :
+		     : "memory", "cc");
+}
+#else
+#define TICKET_SHIFT 16
+
+static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
+{
+	int inc = 0x00010000;
+	int tmp;
+
+	asm volatile(LOCK_PREFIX "xaddl %0, %1\n"
+		     "movzwl %w0, %2\n\t"
+		     "shrl $16, %0\n\t"
+		     "1:\t"
+		     "cmpl %0, %2\n\t"
+		     "je 2f\n\t"
+		     "rep ; nop\n\t"
+		     "movzwl %1, %2\n\t"
+		     /* don't need lfence here, because loads are in-order */
+		     "jmp 1b\n"
+		     "2:"
+		     : "+r" (inc), "+m" (lock->slock), "=&r" (tmp)
+		     :
+		     : "memory", "cc");
+}
+
+static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock)
+{
+	int tmp;
+	int new;
+
+	asm volatile("movl %2,%0\n\t"
+		     "movl %0,%1\n\t"
+		     "roll $16, %0\n\t"
+		     "cmpl %0,%1\n\t"
+		     "leal 0x00010000(%" REG_PTR_MODE "0), %1\n\t"
+		     "jne 1f\n\t"
+		     LOCK_PREFIX "cmpxchgl %1,%2\n\t"
+		     "1:"
+		     "sete %b1\n\t"
+		     "movzbl %b1,%0\n\t"
+		     : "=&a" (tmp), "=&q" (new), "+m" (lock->slock)
+		     :
+		     : "memory", "cc");
+
+	return tmp;
+}
+
+static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock)
+{
+	asm volatile(UNLOCK_LOCK_PREFIX "incw %0"
+		     : "+m" (lock->slock)
+		     :
+		     : "memory", "cc");
+}
+#endif
+
+static inline int __ticket_spin_is_locked(raw_spinlock_t *lock)
+{
+	int tmp = ACCESS_ONCE(lock->slock);
+
+	return !!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1 << TICKET_SHIFT) - 1));
+}
+
+static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
+{
+	int tmp = ACCESS_ONCE(lock->slock);
+
+	return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1;
+}
+
+#ifdef CONFIG_PARAVIRT
+/*
+ * Define virtualization-friendly old-style lock byte lock, for use in
+ * pv_lock_ops if desired.
+ *
+ * This differs from the pre-2.6.24 spinlock by always using xchgb
+ * rather than decb to take the lock; this allows it to use a
+ * zero-initialized lock structure.  It also maintains a 1-byte
+ * contention counter, so that we can implement
+ * __byte_spin_is_contended.
+ */
+struct __byte_spinlock {
+	s8 lock;
+	s8 spinners;
+};
+
+static inline int __byte_spin_is_locked(raw_spinlock_t *lock)
+{
+	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
+	return bl->lock != 0;
+}
+
+static inline int __byte_spin_is_contended(raw_spinlock_t *lock)
+{
+	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
+	return bl->spinners != 0;
+}
+
+static inline void __byte_spin_lock(raw_spinlock_t *lock)
+{
+	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
+	s8 val = 1;
+
+	asm("1: xchgb %1, %0\n"
+	    "   test %1,%1\n"
+	    "   jz 3f\n"
+	    "   " LOCK_PREFIX "incb %2\n"
+	    "2: rep;nop\n"
+	    "   cmpb $1, %0\n"
+	    "   je 2b\n"
+	    "   " LOCK_PREFIX "decb %2\n"
+	    "   jmp 1b\n"
+	    "3:"
+	    : "+m" (bl->lock), "+q" (val), "+m" (bl->spinners): : "memory");
+}
+
+static inline int __byte_spin_trylock(raw_spinlock_t *lock)
+{
+	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
+	u8 old = 1;
+
+	asm("xchgb %1,%0"
+	    : "+m" (bl->lock), "+q" (old) : : "memory");
+
+	return old == 0;
+}
+
+static inline void __byte_spin_unlock(raw_spinlock_t *lock)
+{
+	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
+	smp_wmb();
+	bl->lock = 0;
+}
+#else  /* !CONFIG_PARAVIRT */
+static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
+{
+	return __ticket_spin_is_locked(lock);
+}
+
+static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
+{
+	return __ticket_spin_is_contended(lock);
+}
+
+static __always_inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	__ticket_spin_lock(lock);
+}
+
+static __always_inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	return __ticket_spin_trylock(lock);
+}
+
+static __always_inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	__ticket_spin_unlock(lock);
+}
+
+static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
+						  unsigned long flags)
+{
+	__raw_spin_lock(lock);
+}
+
+#endif	/* CONFIG_PARAVIRT */
+
+static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
+{
+	while (__raw_spin_is_locked(lock))
+		cpu_relax();
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ *
+ * On x86, we implement read-write locks as a 32-bit counter
+ * with the high bit (sign) being the "contended" bit.
+ */
+
+/**
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+static inline int __raw_read_can_lock(raw_rwlock_t *lock)
+{
+	return (int)(lock)->lock > 0;
+}
+
+/**
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+static inline int __raw_write_can_lock(raw_rwlock_t *lock)
+{
+	return (lock)->lock == RW_LOCK_BIAS;
+}
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+	asm volatile(LOCK_PREFIX " subl $1,(%0)\n\t"
+		     "jns 1f\n"
+		     "call __read_lock_failed\n\t"
+		     "1:\n"
+		     ::LOCK_PTR_REG (rw) : "memory");
+}
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+	asm volatile(LOCK_PREFIX " subl %1,(%0)\n\t"
+		     "jz 1f\n"
+		     "call __write_lock_failed\n\t"
+		     "1:\n"
+		     ::LOCK_PTR_REG (rw), "i" (RW_LOCK_BIAS) : "memory");
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t *lock)
+{
+	atomic_t *count = (atomic_t *)lock;
+
+	atomic_dec(count);
+	if (atomic_read(count) >= 0)
+		return 1;
+	atomic_inc(count);
+	return 0;
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *lock)
+{
+	atomic_t *count = (atomic_t *)lock;
+
+	if (atomic_sub_and_test(RW_LOCK_BIAS, count))
+		return 1;
+	atomic_add(RW_LOCK_BIAS, count);
+	return 0;
+}
+
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+	asm volatile(LOCK_PREFIX "incl %0" :"+m" (rw->lock) : : "memory");
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+	asm volatile(LOCK_PREFIX "addl %1, %0"
+		     : "+m" (rw->lock) : "i" (RW_LOCK_BIAS) : "memory");
+}
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /* _ASM_X86_SPINLOCK_H */
diff --git a/arch/x86/include/asm/spinlock_types.h b/arch/x86/include/asm/spinlock_types.h
new file mode 100644
index 0000000..845f81c
--- /dev/null
+++ b/arch/x86/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_X86_SPINLOCK_TYPES_H
+#define _ASM_X86_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct raw_spinlock {
+	unsigned int slock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	unsigned int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ RW_LOCK_BIAS }
+
+#endif /* _ASM_X86_SPINLOCK_TYPES_H */
diff --git a/arch/x86/include/asm/srat.h b/arch/x86/include/asm/srat.h
new file mode 100644
index 0000000..b508d63
--- /dev/null
+++ b/arch/x86/include/asm/srat.h
@@ -0,0 +1,39 @@
+/*
+ * Some of the code in this file has been gleaned from the 64 bit
+ * discontigmem support code base.
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to Pat Gaughen <gone@us.ibm.com>
+ */
+
+#ifndef _ASM_X86_SRAT_H
+#define _ASM_X86_SRAT_H
+
+#ifdef CONFIG_ACPI_NUMA
+extern int get_memcfg_from_srat(void);
+#else
+static inline int get_memcfg_from_srat(void)
+{
+	return 0;
+}
+#endif
+
+#endif /* _ASM_X86_SRAT_H */
diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
new file mode 100644
index 0000000..f517944
--- /dev/null
+++ b/arch/x86/include/asm/stacktrace.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_X86_STACKTRACE_H
+#define _ASM_X86_STACKTRACE_H
+
+extern int kstack_depth_to_print;
+
+/* Generic stack tracer with callbacks */
+
+struct stacktrace_ops {
+	void (*warning)(void *data, char *msg);
+	/* msg must contain %s for the symbol */
+	void (*warning_symbol)(void *data, char *msg, unsigned long symbol);
+	void (*address)(void *data, unsigned long address, int reliable);
+	/* On negative return stop dumping */
+	int (*stack)(void *data, char *name);
+};
+
+void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
+		unsigned long *stack, unsigned long bp,
+		const struct stacktrace_ops *ops, void *data);
+
+#endif /* _ASM_X86_STACKTRACE_H */
diff --git a/arch/x86/include/asm/stat.h b/arch/x86/include/asm/stat.h
new file mode 100644
index 0000000..e0b1d9b
--- /dev/null
+++ b/arch/x86/include/asm/stat.h
@@ -0,0 +1,114 @@
+#ifndef _ASM_X86_STAT_H
+#define _ASM_X86_STAT_H
+
+#define STAT_HAVE_NSEC 1
+
+#ifdef __i386__
+struct stat {
+	unsigned long  st_dev;
+	unsigned long  st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned long  st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char	__pad0[4];
+
+	unsigned long	__st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char	__pad3[4];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	/* Number 512-byte blocks allocated. */
+	unsigned long long	st_blocks;
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned int	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+#else /* __i386__ */
+
+struct stat {
+	unsigned long	st_dev;
+	unsigned long	st_ino;
+	unsigned long	st_nlink;
+
+	unsigned int	st_mode;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	__pad0;
+	unsigned long	st_rdev;
+	long		st_size;
+	long		st_blksize;
+	long		st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+	unsigned long	st_ctime;
+	unsigned long   st_ctime_nsec;
+	long		__unused[3];
+};
+#endif
+
+/* for 32bit emulation and 32 bit kernels */
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+#ifdef __i386__
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+#else
+	unsigned int  st_size;
+	unsigned int  st_atime;
+	unsigned int  st_mtime;
+	unsigned int  st_ctime;
+#endif
+};
+
+#endif /* _ASM_X86_STAT_H */
diff --git a/arch/x86/include/asm/statfs.h b/arch/x86/include/asm/statfs.h
new file mode 100644
index 0000000..2d0adbf
--- /dev/null
+++ b/arch/x86/include/asm/statfs.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_X86_STATFS_H
+#define _ASM_X86_STATFS_H
+
+/*
+ * We need compat_statfs64 to be packed, because the i386 ABI won't
+ * add padding at the end to bring it to a multiple of 8 bytes, but
+ * the x86_64 ABI will.
+ */
+#define ARCH_PACK_COMPAT_STATFS64 __attribute__((packed,aligned(4)))
+
+#include <asm-generic/statfs.h>
+#endif /* _ASM_X86_STATFS_H */
diff --git a/include/asm-x86/string.h b/arch/x86/include/asm/string.h
similarity index 100%
rename from include/asm-x86/string.h
rename to arch/x86/include/asm/string.h
diff --git a/arch/x86/include/asm/string_32.h b/arch/x86/include/asm/string_32.h
new file mode 100644
index 0000000..0e0e3ba
--- /dev/null
+++ b/arch/x86/include/asm/string_32.h
@@ -0,0 +1,326 @@
+#ifndef _ASM_X86_STRING_32_H
+#define _ASM_X86_STRING_32_H
+
+#ifdef __KERNEL__
+
+/* Let gcc decide whether to inline or use the out of line functions */
+
+#define __HAVE_ARCH_STRCPY
+extern char *strcpy(char *dest, const char *src);
+
+#define __HAVE_ARCH_STRNCPY
+extern char *strncpy(char *dest, const char *src, size_t count);
+
+#define __HAVE_ARCH_STRCAT
+extern char *strcat(char *dest, const char *src);
+
+#define __HAVE_ARCH_STRNCAT
+extern char *strncat(char *dest, const char *src, size_t count);
+
+#define __HAVE_ARCH_STRCMP
+extern int strcmp(const char *cs, const char *ct);
+
+#define __HAVE_ARCH_STRNCMP
+extern int strncmp(const char *cs, const char *ct, size_t count);
+
+#define __HAVE_ARCH_STRCHR
+extern char *strchr(const char *s, int c);
+
+#define __HAVE_ARCH_STRLEN
+extern size_t strlen(const char *s);
+
+static __always_inline void *__memcpy(void *to, const void *from, size_t n)
+{
+	int d0, d1, d2;
+	asm volatile("rep ; movsl\n\t"
+		     "movl %4,%%ecx\n\t"
+		     "andl $3,%%ecx\n\t"
+		     "jz 1f\n\t"
+		     "rep ; movsb\n\t"
+		     "1:"
+		     : "=&c" (d0), "=&D" (d1), "=&S" (d2)
+		     : "0" (n / 4), "g" (n), "1" ((long)to), "2" ((long)from)
+		     : "memory");
+	return to;
+}
+
+/*
+ * This looks ugly, but the compiler can optimize it totally,
+ * as the count is constant.
+ */
+static __always_inline void *__constant_memcpy(void *to, const void *from,
+					       size_t n)
+{
+	long esi, edi;
+	if (!n)
+		return to;
+
+	switch (n) {
+	case 1:
+		*(char *)to = *(char *)from;
+		return to;
+	case 2:
+		*(short *)to = *(short *)from;
+		return to;
+	case 4:
+		*(int *)to = *(int *)from;
+		return to;
+
+	case 3:
+		*(short *)to = *(short *)from;
+		*((char *)to + 2) = *((char *)from + 2);
+		return to;
+	case 5:
+		*(int *)to = *(int *)from;
+		*((char *)to + 4) = *((char *)from + 4);
+		return to;
+	case 6:
+		*(int *)to = *(int *)from;
+		*((short *)to + 2) = *((short *)from + 2);
+		return to;
+	case 8:
+		*(int *)to = *(int *)from;
+		*((int *)to + 1) = *((int *)from + 1);
+		return to;
+	}
+
+	esi = (long)from;
+	edi = (long)to;
+	if (n >= 5 * 4) {
+		/* large block: use rep prefix */
+		int ecx;
+		asm volatile("rep ; movsl"
+			     : "=&c" (ecx), "=&D" (edi), "=&S" (esi)
+			     : "0" (n / 4), "1" (edi), "2" (esi)
+			     : "memory"
+		);
+	} else {
+		/* small block: don't clobber ecx + smaller code */
+		if (n >= 4 * 4)
+			asm volatile("movsl"
+				     : "=&D"(edi), "=&S"(esi)
+				     : "0"(edi), "1"(esi)
+				     : "memory");
+		if (n >= 3 * 4)
+			asm volatile("movsl"
+				     : "=&D"(edi), "=&S"(esi)
+				     : "0"(edi), "1"(esi)
+				     : "memory");
+		if (n >= 2 * 4)
+			asm volatile("movsl"
+				     : "=&D"(edi), "=&S"(esi)
+				     : "0"(edi), "1"(esi)
+				     : "memory");
+		if (n >= 1 * 4)
+			asm volatile("movsl"
+				     : "=&D"(edi), "=&S"(esi)
+				     : "0"(edi), "1"(esi)
+				     : "memory");
+	}
+	switch (n % 4) {
+		/* tail */
+	case 0:
+		return to;
+	case 1:
+		asm volatile("movsb"
+			     : "=&D"(edi), "=&S"(esi)
+			     : "0"(edi), "1"(esi)
+			     : "memory");
+		return to;
+	case 2:
+		asm volatile("movsw"
+			     : "=&D"(edi), "=&S"(esi)
+			     : "0"(edi), "1"(esi)
+			     : "memory");
+		return to;
+	default:
+		asm volatile("movsw\n\tmovsb"
+			     : "=&D"(edi), "=&S"(esi)
+			     : "0"(edi), "1"(esi)
+			     : "memory");
+		return to;
+	}
+}
+
+#define __HAVE_ARCH_MEMCPY
+
+#ifdef CONFIG_X86_USE_3DNOW
+
+#include <asm/mmx.h>
+
+/*
+ *	This CPU favours 3DNow strongly (eg AMD Athlon)
+ */
+
+static inline void *__constant_memcpy3d(void *to, const void *from, size_t len)
+{
+	if (len < 512)
+		return __constant_memcpy(to, from, len);
+	return _mmx_memcpy(to, from, len);
+}
+
+static inline void *__memcpy3d(void *to, const void *from, size_t len)
+{
+	if (len < 512)
+		return __memcpy(to, from, len);
+	return _mmx_memcpy(to, from, len);
+}
+
+#define memcpy(t, f, n)				\
+	(__builtin_constant_p((n))		\
+	 ? __constant_memcpy3d((t), (f), (n))	\
+	 : __memcpy3d((t), (f), (n)))
+
+#else
+
+/*
+ *	No 3D Now!
+ */
+
+#define memcpy(t, f, n)				\
+	(__builtin_constant_p((n))		\
+	 ? __constant_memcpy((t), (f), (n))	\
+	 : __memcpy((t), (f), (n)))
+
+#endif
+
+#define __HAVE_ARCH_MEMMOVE
+void *memmove(void *dest, const void *src, size_t n);
+
+#define memcmp __builtin_memcmp
+
+#define __HAVE_ARCH_MEMCHR
+extern void *memchr(const void *cs, int c, size_t count);
+
+static inline void *__memset_generic(void *s, char c, size_t count)
+{
+	int d0, d1;
+	asm volatile("rep\n\t"
+		     "stosb"
+		     : "=&c" (d0), "=&D" (d1)
+		     : "a" (c), "1" (s), "0" (count)
+		     : "memory");
+	return s;
+}
+
+/* we might want to write optimized versions of these later */
+#define __constant_count_memset(s, c, count) __memset_generic((s), (c), (count))
+
+/*
+ * memset(x, 0, y) is a reasonably common thing to do, so we want to fill
+ * things 32 bits at a time even when we don't know the size of the
+ * area at compile-time..
+ */
+static __always_inline
+void *__constant_c_memset(void *s, unsigned long c, size_t count)
+{
+	int d0, d1;
+	asm volatile("rep ; stosl\n\t"
+		     "testb $2,%b3\n\t"
+		     "je 1f\n\t"
+		     "stosw\n"
+		     "1:\ttestb $1,%b3\n\t"
+		     "je 2f\n\t"
+		     "stosb\n"
+		     "2:"
+		     : "=&c" (d0), "=&D" (d1)
+		     : "a" (c), "q" (count), "0" (count/4), "1" ((long)s)
+		     : "memory");
+	return s;
+}
+
+/* Added by Gertjan van Wingerde to make minix and sysv module work */
+#define __HAVE_ARCH_STRNLEN
+extern size_t strnlen(const char *s, size_t count);
+/* end of additional stuff */
+
+#define __HAVE_ARCH_STRSTR
+extern char *strstr(const char *cs, const char *ct);
+
+/*
+ * This looks horribly ugly, but the compiler can optimize it totally,
+ * as we by now know that both pattern and count is constant..
+ */
+static __always_inline
+void *__constant_c_and_count_memset(void *s, unsigned long pattern,
+				    size_t count)
+{
+	switch (count) {
+	case 0:
+		return s;
+	case 1:
+		*(unsigned char *)s = pattern & 0xff;
+		return s;
+	case 2:
+		*(unsigned short *)s = pattern & 0xffff;
+		return s;
+	case 3:
+		*(unsigned short *)s = pattern & 0xffff;
+		*((unsigned char *)s + 2) = pattern & 0xff;
+		return s;
+	case 4:
+		*(unsigned long *)s = pattern;
+		return s;
+	}
+
+#define COMMON(x)							\
+	asm volatile("rep ; stosl"					\
+		     x							\
+		     : "=&c" (d0), "=&D" (d1)				\
+		     : "a" (eax), "0" (count/4), "1" ((long)s)	\
+		     : "memory")
+
+	{
+		int d0, d1;
+#if __GNUC__ == 4 && __GNUC_MINOR__ == 0
+		/* Workaround for broken gcc 4.0 */
+		register unsigned long eax asm("%eax") = pattern;
+#else
+		unsigned long eax = pattern;
+#endif
+
+		switch (count % 4) {
+		case 0:
+			COMMON("");
+			return s;
+		case 1:
+			COMMON("\n\tstosb");
+			return s;
+		case 2:
+			COMMON("\n\tstosw");
+			return s;
+		default:
+			COMMON("\n\tstosw\n\tstosb");
+			return s;
+		}
+	}
+
+#undef COMMON
+}
+
+#define __constant_c_x_memset(s, c, count)			\
+	(__builtin_constant_p(count)				\
+	 ? __constant_c_and_count_memset((s), (c), (count))	\
+	 : __constant_c_memset((s), (c), (count)))
+
+#define __memset(s, c, count)				\
+	(__builtin_constant_p(count)			\
+	 ? __constant_count_memset((s), (c), (count))	\
+	 : __memset_generic((s), (c), (count)))
+
+#define __HAVE_ARCH_MEMSET
+#define memset(s, c, count)						\
+	(__builtin_constant_p(c)					\
+	 ? __constant_c_x_memset((s), (0x01010101UL * (unsigned char)(c)), \
+				 (count))				\
+	 : __memset((s), (c), (count)))
+
+/*
+ * find the first occurrence of byte 'c', or 1 past the area if none
+ */
+#define __HAVE_ARCH_MEMSCAN
+extern void *memscan(void *addr, int c, size_t size);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_STRING_32_H */
diff --git a/arch/x86/include/asm/string_64.h b/arch/x86/include/asm/string_64.h
new file mode 100644
index 0000000..2afe164
--- /dev/null
+++ b/arch/x86/include/asm/string_64.h
@@ -0,0 +1,60 @@
+#ifndef _ASM_X86_STRING_64_H
+#define _ASM_X86_STRING_64_H
+
+#ifdef __KERNEL__
+
+/* Written 2002 by Andi Kleen */
+
+/* Only used for special circumstances. Stolen from i386/string.h */
+static __always_inline void *__inline_memcpy(void *to, const void *from, size_t n)
+{
+	unsigned long d0, d1, d2;
+	asm volatile("rep ; movsl\n\t"
+		     "testb $2,%b4\n\t"
+		     "je 1f\n\t"
+		     "movsw\n"
+		     "1:\ttestb $1,%b4\n\t"
+		     "je 2f\n\t"
+		     "movsb\n"
+		     "2:"
+		     : "=&c" (d0), "=&D" (d1), "=&S" (d2)
+		     : "0" (n / 4), "q" (n), "1" ((long)to), "2" ((long)from)
+		     : "memory");
+	return to;
+}
+
+/* Even with __builtin_ the compiler may decide to use the out of line
+   function. */
+
+#define __HAVE_ARCH_MEMCPY 1
+#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
+extern void *memcpy(void *to, const void *from, size_t len);
+#else
+extern void *__memcpy(void *to, const void *from, size_t len);
+#define memcpy(dst, src, len)					\
+({								\
+	size_t __len = (len);					\
+	void *__ret;						\
+	if (__builtin_constant_p(len) && __len >= 64)		\
+		__ret = __memcpy((dst), (src), __len);		\
+	else							\
+		__ret = __builtin_memcpy((dst), (src), __len);	\
+	__ret;							\
+})
+#endif
+
+#define __HAVE_ARCH_MEMSET
+void *memset(void *s, int c, size_t n);
+
+#define __HAVE_ARCH_MEMMOVE
+void *memmove(void *dest, const void *src, size_t count);
+
+int memcmp(const void *cs, const void *ct, size_t count);
+size_t strlen(const char *s);
+char *strcpy(char *dest, const char *src);
+char *strcat(char *dest, const char *src);
+int strcmp(const char *cs, const char *ct);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_STRING_64_H */
diff --git a/include/asm-x86/summit/apic.h b/arch/x86/include/asm/summit/apic.h
similarity index 100%
rename from include/asm-x86/summit/apic.h
rename to arch/x86/include/asm/summit/apic.h
diff --git a/include/asm-x86/summit/apicdef.h b/arch/x86/include/asm/summit/apicdef.h
similarity index 100%
rename from include/asm-x86/summit/apicdef.h
rename to arch/x86/include/asm/summit/apicdef.h
diff --git a/include/asm-x86/summit/ipi.h b/arch/x86/include/asm/summit/ipi.h
similarity index 100%
rename from include/asm-x86/summit/ipi.h
rename to arch/x86/include/asm/summit/ipi.h
diff --git a/include/asm-x86/summit/mpparse.h b/arch/x86/include/asm/summit/mpparse.h
similarity index 100%
rename from include/asm-x86/summit/mpparse.h
rename to arch/x86/include/asm/summit/mpparse.h
diff --git a/include/asm-x86/suspend.h b/arch/x86/include/asm/suspend.h
similarity index 100%
rename from include/asm-x86/suspend.h
rename to arch/x86/include/asm/suspend.h
diff --git a/arch/x86/include/asm/suspend_32.h b/arch/x86/include/asm/suspend_32.h
new file mode 100644
index 0000000..a5074bd
--- /dev/null
+++ b/arch/x86/include/asm/suspend_32.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2001-2002 Pavel Machek <pavel@suse.cz>
+ * Based on code
+ * Copyright 2001 Patrick Mochel <mochel@osdl.org>
+ */
+#ifndef _ASM_X86_SUSPEND_32_H
+#define _ASM_X86_SUSPEND_32_H
+
+#include <asm/desc.h>
+#include <asm/i387.h>
+
+static inline int arch_prepare_suspend(void) { return 0; }
+
+/* image of the saved processor state */
+struct saved_context {
+	u16 es, fs, gs, ss;
+	unsigned long cr0, cr2, cr3, cr4;
+	struct desc_ptr gdt;
+	struct desc_ptr idt;
+	u16 ldt;
+	u16 tss;
+	unsigned long tr;
+	unsigned long safety;
+	unsigned long return_address;
+} __attribute__((packed));
+
+#ifdef CONFIG_ACPI
+extern unsigned long saved_eip;
+extern unsigned long saved_esp;
+extern unsigned long saved_ebp;
+extern unsigned long saved_ebx;
+extern unsigned long saved_esi;
+extern unsigned long saved_edi;
+
+static inline void acpi_save_register_state(unsigned long return_point)
+{
+	saved_eip = return_point;
+	asm volatile("movl %%esp,%0" : "=m" (saved_esp));
+	asm volatile("movl %%ebp,%0" : "=m" (saved_ebp));
+	asm volatile("movl %%ebx,%0" : "=m" (saved_ebx));
+	asm volatile("movl %%edi,%0" : "=m" (saved_edi));
+	asm volatile("movl %%esi,%0" : "=m" (saved_esi));
+}
+
+#define acpi_restore_register_state()  do {} while (0)
+
+/* routines for saving/restoring kernel state */
+extern int acpi_save_state_mem(void);
+#endif
+
+#endif /* _ASM_X86_SUSPEND_32_H */
diff --git a/arch/x86/include/asm/suspend_64.h b/arch/x86/include/asm/suspend_64.h
new file mode 100644
index 0000000..06284f4
--- /dev/null
+++ b/arch/x86/include/asm/suspend_64.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2001-2003 Pavel Machek <pavel@suse.cz>
+ * Based on code
+ * Copyright 2001 Patrick Mochel <mochel@osdl.org>
+ */
+#ifndef _ASM_X86_SUSPEND_64_H
+#define _ASM_X86_SUSPEND_64_H
+
+#include <asm/desc.h>
+#include <asm/i387.h>
+
+static inline int arch_prepare_suspend(void)
+{
+	return 0;
+}
+
+/*
+ * Image of the saved processor state, used by the low level ACPI suspend to
+ * RAM code and by the low level hibernation code.
+ *
+ * If you modify it, fix arch/x86/kernel/acpi/wakeup_64.S and make sure that
+ * __save/__restore_processor_state(), defined in arch/x86/kernel/suspend_64.c,
+ * still work as required.
+ */
+struct saved_context {
+	struct pt_regs regs;
+	u16 ds, es, fs, gs, ss;
+	unsigned long gs_base, gs_kernel_base, fs_base;
+	unsigned long cr0, cr2, cr3, cr4, cr8;
+	unsigned long efer;
+	u16 gdt_pad;
+	u16 gdt_limit;
+	unsigned long gdt_base;
+	u16 idt_pad;
+	u16 idt_limit;
+	unsigned long idt_base;
+	u16 ldt;
+	u16 tss;
+	unsigned long tr;
+	unsigned long safety;
+	unsigned long return_address;
+} __attribute__((packed));
+
+#define loaddebug(thread,register) \
+	set_debugreg((thread)->debugreg##register, register)
+
+/* routines for saving/restoring kernel state */
+extern int acpi_save_state_mem(void);
+extern char core_restore_code;
+extern char restore_registers;
+
+#endif /* _ASM_X86_SUSPEND_64_H */
diff --git a/arch/x86/include/asm/swiotlb.h b/arch/x86/include/asm/swiotlb.h
new file mode 100644
index 0000000..51fb2c7
--- /dev/null
+++ b/arch/x86/include/asm/swiotlb.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_X86_SWIOTLB_H
+#define _ASM_X86_SWIOTLB_H
+
+#include <asm/dma-mapping.h>
+
+/* SWIOTLB interface */
+
+extern dma_addr_t swiotlb_map_single(struct device *hwdev, void *ptr,
+				     size_t size, int dir);
+extern void *swiotlb_alloc_coherent(struct device *hwdev, size_t size,
+				    dma_addr_t *dma_handle, gfp_t flags);
+extern void swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr,
+				 size_t size, int dir);
+extern void swiotlb_sync_single_for_cpu(struct device *hwdev,
+					dma_addr_t dev_addr,
+					size_t size, int dir);
+extern void swiotlb_sync_single_for_device(struct device *hwdev,
+					   dma_addr_t dev_addr,
+					   size_t size, int dir);
+extern void swiotlb_sync_single_range_for_cpu(struct device *hwdev,
+					      dma_addr_t dev_addr,
+					      unsigned long offset,
+					      size_t size, int dir);
+extern void swiotlb_sync_single_range_for_device(struct device *hwdev,
+						 dma_addr_t dev_addr,
+						 unsigned long offset,
+						 size_t size, int dir);
+extern void swiotlb_sync_sg_for_cpu(struct device *hwdev,
+				    struct scatterlist *sg, int nelems,
+				    int dir);
+extern void swiotlb_sync_sg_for_device(struct device *hwdev,
+				       struct scatterlist *sg, int nelems,
+				       int dir);
+extern int swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg,
+			  int nents, int direction);
+extern void swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg,
+			     int nents, int direction);
+extern int swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr);
+extern void swiotlb_free_coherent(struct device *hwdev, size_t size,
+				  void *vaddr, dma_addr_t dma_handle);
+extern int swiotlb_dma_supported(struct device *hwdev, u64 mask);
+extern void swiotlb_init(void);
+
+extern int swiotlb_force;
+
+#ifdef CONFIG_SWIOTLB
+extern int swiotlb;
+extern void pci_swiotlb_init(void);
+#else
+#define swiotlb 0
+static inline void pci_swiotlb_init(void)
+{
+}
+#endif
+
+static inline void dma_mark_clean(void *addr, size_t size) {}
+
+#endif /* _ASM_X86_SWIOTLB_H */
diff --git a/arch/x86/include/asm/sync_bitops.h b/arch/x86/include/asm/sync_bitops.h
new file mode 100644
index 0000000..9d09b40
--- /dev/null
+++ b/arch/x86/include/asm/sync_bitops.h
@@ -0,0 +1,130 @@
+#ifndef _ASM_X86_SYNC_BITOPS_H
+#define _ASM_X86_SYNC_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+/*
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+
+#define ADDR (*(volatile long *)addr)
+
+/**
+ * sync_set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ *
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void sync_set_bit(int nr, volatile unsigned long *addr)
+{
+	asm volatile("lock; btsl %1,%0"
+		     : "+m" (ADDR)
+		     : "Ir" (nr)
+		     : "memory");
+}
+
+/**
+ * sync_clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * sync_clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static inline void sync_clear_bit(int nr, volatile unsigned long *addr)
+{
+	asm volatile("lock; btrl %1,%0"
+		     : "+m" (ADDR)
+		     : "Ir" (nr)
+		     : "memory");
+}
+
+/**
+ * sync_change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * sync_change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void sync_change_bit(int nr, volatile unsigned long *addr)
+{
+	asm volatile("lock; btcl %1,%0"
+		     : "+m" (ADDR)
+		     : "Ir" (nr)
+		     : "memory");
+}
+
+/**
+ * sync_test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int sync_test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile("lock; btsl %2,%1\n\tsbbl %0,%0"
+		     : "=r" (oldbit), "+m" (ADDR)
+		     : "Ir" (nr) : "memory");
+	return oldbit;
+}
+
+/**
+ * sync_test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int sync_test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile("lock; btrl %2,%1\n\tsbbl %0,%0"
+		     : "=r" (oldbit), "+m" (ADDR)
+		     : "Ir" (nr) : "memory");
+	return oldbit;
+}
+
+/**
+ * sync_test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int sync_test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	int oldbit;
+
+	asm volatile("lock; btcl %2,%1\n\tsbbl %0,%0"
+		     : "=r" (oldbit), "+m" (ADDR)
+		     : "Ir" (nr) : "memory");
+	return oldbit;
+}
+
+#define sync_test_bit(nr, addr) test_bit(nr, addr)
+
+#undef ADDR
+
+#endif /* _ASM_X86_SYNC_BITOPS_H */
diff --git a/arch/x86/include/asm/syscall.h b/arch/x86/include/asm/syscall.h
new file mode 100644
index 0000000..d82f39b
--- /dev/null
+++ b/arch/x86/include/asm/syscall.h
@@ -0,0 +1,213 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * See asm-generic/syscall.h for descriptions of what we must do here.
+ */
+
+#ifndef _ASM_X86_SYSCALL_H
+#define _ASM_X86_SYSCALL_H
+
+#include <linux/sched.h>
+#include <linux/err.h>
+
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	/*
+	 * We always sign-extend a -1 value being set here,
+	 * so this is always either -1L or a syscall number.
+	 */
+	return regs->orig_ax;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->ax = regs->orig_ax;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	unsigned long error = regs->ax;
+#ifdef CONFIG_IA32_EMULATION
+	/*
+	 * TS_COMPAT is set for 32-bit syscall entries and then
+	 * remains set until we return to user mode.
+	 */
+	if (task_thread_info(task)->status & TS_COMPAT)
+		/*
+		 * Sign-extend the value so (int)-EFOO becomes (long)-EFOO
+		 * and will match correctly in comparisons.
+		 */
+		error = (long) (int) error;
+#endif
+	return IS_ERR_VALUE(error) ? error : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->ax;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	regs->ax = (long) error ?: val;
+}
+
+#ifdef CONFIG_X86_32
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+	memcpy(args, &regs->bx + i, n * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+	memcpy(&regs->bx + i, args, n * sizeof(args[0]));
+}
+
+#else	 /* CONFIG_X86_64 */
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+# ifdef CONFIG_IA32_EMULATION
+	if (task_thread_info(task)->status & TS_COMPAT)
+		switch (i) {
+		case 0:
+			if (!n--) break;
+			*args++ = regs->bx;
+		case 1:
+			if (!n--) break;
+			*args++ = regs->cx;
+		case 2:
+			if (!n--) break;
+			*args++ = regs->dx;
+		case 3:
+			if (!n--) break;
+			*args++ = regs->si;
+		case 4:
+			if (!n--) break;
+			*args++ = regs->di;
+		case 5:
+			if (!n--) break;
+			*args++ = regs->bp;
+		case 6:
+			if (!n--) break;
+		default:
+			BUG();
+			break;
+		}
+	else
+# endif
+		switch (i) {
+		case 0:
+			if (!n--) break;
+			*args++ = regs->di;
+		case 1:
+			if (!n--) break;
+			*args++ = regs->si;
+		case 2:
+			if (!n--) break;
+			*args++ = regs->dx;
+		case 3:
+			if (!n--) break;
+			*args++ = regs->r10;
+		case 4:
+			if (!n--) break;
+			*args++ = regs->r8;
+		case 5:
+			if (!n--) break;
+			*args++ = regs->r9;
+		case 6:
+			if (!n--) break;
+		default:
+			BUG();
+			break;
+		}
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+# ifdef CONFIG_IA32_EMULATION
+	if (task_thread_info(task)->status & TS_COMPAT)
+		switch (i) {
+		case 0:
+			if (!n--) break;
+			regs->bx = *args++;
+		case 1:
+			if (!n--) break;
+			regs->cx = *args++;
+		case 2:
+			if (!n--) break;
+			regs->dx = *args++;
+		case 3:
+			if (!n--) break;
+			regs->si = *args++;
+		case 4:
+			if (!n--) break;
+			regs->di = *args++;
+		case 5:
+			if (!n--) break;
+			regs->bp = *args++;
+		case 6:
+			if (!n--) break;
+		default:
+			BUG();
+			break;
+		}
+	else
+# endif
+		switch (i) {
+		case 0:
+			if (!n--) break;
+			regs->di = *args++;
+		case 1:
+			if (!n--) break;
+			regs->si = *args++;
+		case 2:
+			if (!n--) break;
+			regs->dx = *args++;
+		case 3:
+			if (!n--) break;
+			regs->r10 = *args++;
+		case 4:
+			if (!n--) break;
+			regs->r8 = *args++;
+		case 5:
+			if (!n--) break;
+			regs->r9 = *args++;
+		case 6:
+			if (!n--) break;
+		default:
+			BUG();
+			break;
+		}
+}
+
+#endif	/* CONFIG_X86_32 */
+
+#endif	/* _ASM_X86_SYSCALL_H */
diff --git a/include/asm-x86/syscalls.h b/arch/x86/include/asm/syscalls.h
similarity index 100%
rename from include/asm-x86/syscalls.h
rename to arch/x86/include/asm/syscalls.h
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
new file mode 100644
index 0000000..2ed3f0f
--- /dev/null
+++ b/arch/x86/include/asm/system.h
@@ -0,0 +1,425 @@
+#ifndef _ASM_X86_SYSTEM_H
+#define _ASM_X86_SYSTEM_H
+
+#include <asm/asm.h>
+#include <asm/segment.h>
+#include <asm/cpufeature.h>
+#include <asm/cmpxchg.h>
+#include <asm/nops.h>
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+
+/* entries in ARCH_DLINFO: */
+#ifdef CONFIG_IA32_EMULATION
+# define AT_VECTOR_SIZE_ARCH 2
+#else
+# define AT_VECTOR_SIZE_ARCH 1
+#endif
+
+#ifdef CONFIG_X86_32
+
+struct task_struct; /* one of the stranger aspects of C forward declarations */
+struct task_struct *__switch_to(struct task_struct *prev,
+				struct task_struct *next);
+
+/*
+ * Saving eflags is important. It switches not only IOPL between tasks,
+ * it also protects other tasks from NT leaking through sysenter etc.
+ */
+#define switch_to(prev, next, last)					\
+do {									\
+	/*								\
+	 * Context-switching clobbers all registers, so we clobber	\
+	 * them explicitly, via unused output variables.		\
+	 * (EAX and EBP is not listed because EBP is saved/restored	\
+	 * explicitly for wchan access and EAX is the return value of	\
+	 * __switch_to())						\
+	 */								\
+	unsigned long ebx, ecx, edx, esi, edi;				\
+									\
+	asm volatile("pushfl\n\t"		/* save    flags */	\
+		     "pushl %%ebp\n\t"		/* save    EBP   */	\
+		     "movl %%esp,%[prev_sp]\n\t"	/* save    ESP   */ \
+		     "movl %[next_sp],%%esp\n\t"	/* restore ESP   */ \
+		     "movl $1f,%[prev_ip]\n\t"	/* save    EIP   */	\
+		     "pushl %[next_ip]\n\t"	/* restore EIP   */	\
+		     "jmp __switch_to\n"	/* regparm call  */	\
+		     "1:\t"						\
+		     "popl %%ebp\n\t"		/* restore EBP   */	\
+		     "popfl\n"			/* restore flags */	\
+									\
+		     /* output parameters */				\
+		     : [prev_sp] "=m" (prev->thread.sp),		\
+		       [prev_ip] "=m" (prev->thread.ip),		\
+		       "=a" (last),					\
+									\
+		       /* clobbered output registers: */		\
+		       "=b" (ebx), "=c" (ecx), "=d" (edx),		\
+		       "=S" (esi), "=D" (edi)				\
+		       							\
+		       /* input parameters: */				\
+		     : [next_sp]  "m" (next->thread.sp),		\
+		       [next_ip]  "m" (next->thread.ip),		\
+		       							\
+		       /* regparm parameters for __switch_to(): */	\
+		       [prev]     "a" (prev),				\
+		       [next]     "d" (next)				\
+									\
+		     : /* reloaded segment registers */			\
+			"memory");					\
+} while (0)
+
+/*
+ * disable hlt during certain critical i/o operations
+ */
+#define HAVE_DISABLE_HLT
+#else
+#define __SAVE(reg, offset) "movq %%" #reg ",(14-" #offset ")*8(%%rsp)\n\t"
+#define __RESTORE(reg, offset) "movq (14-" #offset ")*8(%%rsp),%%" #reg "\n\t"
+
+/* frame pointer must be last for get_wchan */
+#define SAVE_CONTEXT    "pushf ; pushq %%rbp ; movq %%rsi,%%rbp\n\t"
+#define RESTORE_CONTEXT "movq %%rbp,%%rsi ; popq %%rbp ; popf\t"
+
+#define __EXTRA_CLOBBER  \
+	, "rcx", "rbx", "rdx", "r8", "r9", "r10", "r11", \
+	  "r12", "r13", "r14", "r15"
+
+/* Save restore flags to clear handle leaking NT */
+#define switch_to(prev, next, last) \
+	asm volatile(SAVE_CONTEXT						    \
+	     "movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */	  \
+	     "movq %P[threadrsp](%[next]),%%rsp\n\t" /* restore RSP */	  \
+	     "call __switch_to\n\t"					  \
+	     ".globl thread_return\n"					  \
+	     "thread_return:\n\t"					  \
+	     "movq %%gs:%P[pda_pcurrent],%%rsi\n\t"			  \
+	     "movq %P[thread_info](%%rsi),%%r8\n\t"			  \
+	     LOCK_PREFIX "btr  %[tif_fork],%P[ti_flags](%%r8)\n\t"	  \
+	     "movq %%rax,%%rdi\n\t" 					  \
+	     "jc   ret_from_fork\n\t"					  \
+	     RESTORE_CONTEXT						  \
+	     : "=a" (last)					  	  \
+	     : [next] "S" (next), [prev] "D" (prev),			  \
+	       [threadrsp] "i" (offsetof(struct task_struct, thread.sp)), \
+	       [ti_flags] "i" (offsetof(struct thread_info, flags)),	  \
+	       [tif_fork] "i" (TIF_FORK),			  	  \
+	       [thread_info] "i" (offsetof(struct task_struct, stack)),   \
+	       [pda_pcurrent] "i" (offsetof(struct x8664_pda, pcurrent))  \
+	     : "memory", "cc" __EXTRA_CLOBBER)
+#endif
+
+#ifdef __KERNEL__
+#define _set_base(addr, base) do { unsigned long __pr; \
+__asm__ __volatile__ ("movw %%dx,%1\n\t" \
+	"rorl $16,%%edx\n\t" \
+	"movb %%dl,%2\n\t" \
+	"movb %%dh,%3" \
+	:"=&d" (__pr) \
+	:"m" (*((addr)+2)), \
+	 "m" (*((addr)+4)), \
+	 "m" (*((addr)+7)), \
+	 "0" (base) \
+	); } while (0)
+
+#define _set_limit(addr, limit) do { unsigned long __lr; \
+__asm__ __volatile__ ("movw %%dx,%1\n\t" \
+	"rorl $16,%%edx\n\t" \
+	"movb %2,%%dh\n\t" \
+	"andb $0xf0,%%dh\n\t" \
+	"orb %%dh,%%dl\n\t" \
+	"movb %%dl,%2" \
+	:"=&d" (__lr) \
+	:"m" (*(addr)), \
+	 "m" (*((addr)+6)), \
+	 "0" (limit) \
+	); } while (0)
+
+#define set_base(ldt, base) _set_base(((char *)&(ldt)) , (base))
+#define set_limit(ldt, limit) _set_limit(((char *)&(ldt)) , ((limit)-1))
+
+extern void native_load_gs_index(unsigned);
+
+/*
+ * Load a segment. Fall back on loading the zero
+ * segment if something goes wrong..
+ */
+#define loadsegment(seg, value)			\
+	asm volatile("\n"			\
+		     "1:\t"			\
+		     "movl %k0,%%" #seg "\n"	\
+		     "2:\n"			\
+		     ".section .fixup,\"ax\"\n"	\
+		     "3:\t"			\
+		     "movl %k1, %%" #seg "\n\t"	\
+		     "jmp 2b\n"			\
+		     ".previous\n"		\
+		     _ASM_EXTABLE(1b,3b)	\
+		     : :"r" (value), "r" (0) : "memory")
+
+
+/*
+ * Save a segment register away
+ */
+#define savesegment(seg, value)				\
+	asm("mov %%" #seg ",%0":"=r" (value) : : "memory")
+
+static inline unsigned long get_limit(unsigned long segment)
+{
+	unsigned long __limit;
+	asm("lsll %1,%0" : "=r" (__limit) : "r" (segment));
+	return __limit + 1;
+}
+
+static inline void native_clts(void)
+{
+	asm volatile("clts");
+}
+
+/*
+ * Volatile isn't enough to prevent the compiler from reordering the
+ * read/write functions for the control registers and messing everything up.
+ * A memory clobber would solve the problem, but would prevent reordering of
+ * all loads stores around it, which can hurt performance. Solution is to
+ * use a variable and mimic reads and writes to it to enforce serialization
+ */
+static unsigned long __force_order;
+
+static inline unsigned long native_read_cr0(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline void native_write_cr0(unsigned long val)
+{
+	asm volatile("mov %0,%%cr0": : "r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr2(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline void native_write_cr2(unsigned long val)
+{
+	asm volatile("mov %0,%%cr2": : "r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr3(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline void native_write_cr3(unsigned long val)
+{
+	asm volatile("mov %0,%%cr3": : "r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr4(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline unsigned long native_read_cr4_safe(void)
+{
+	unsigned long val;
+	/* This could fault if %cr4 does not exist. In x86_64, a cr4 always
+	 * exists, so it will never fail. */
+#ifdef CONFIG_X86_32
+	asm volatile("1: mov %%cr4, %0\n"
+		     "2:\n"
+		     _ASM_EXTABLE(1b, 2b)
+		     : "=r" (val), "=m" (__force_order) : "0" (0));
+#else
+	val = native_read_cr4();
+#endif
+	return val;
+}
+
+static inline void native_write_cr4(unsigned long val)
+{
+	asm volatile("mov %0,%%cr4": : "r" (val), "m" (__force_order));
+}
+
+#ifdef CONFIG_X86_64
+static inline unsigned long native_read_cr8(void)
+{
+	unsigned long cr8;
+	asm volatile("movq %%cr8,%0" : "=r" (cr8));
+	return cr8;
+}
+
+static inline void native_write_cr8(unsigned long val)
+{
+	asm volatile("movq %0,%%cr8" :: "r" (val) : "memory");
+}
+#endif
+
+static inline void native_wbinvd(void)
+{
+	asm volatile("wbinvd": : :"memory");
+}
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define read_cr0()	(native_read_cr0())
+#define write_cr0(x)	(native_write_cr0(x))
+#define read_cr2()	(native_read_cr2())
+#define write_cr2(x)	(native_write_cr2(x))
+#define read_cr3()	(native_read_cr3())
+#define write_cr3(x)	(native_write_cr3(x))
+#define read_cr4()	(native_read_cr4())
+#define read_cr4_safe()	(native_read_cr4_safe())
+#define write_cr4(x)	(native_write_cr4(x))
+#define wbinvd()	(native_wbinvd())
+#ifdef CONFIG_X86_64
+#define read_cr8()	(native_read_cr8())
+#define write_cr8(x)	(native_write_cr8(x))
+#define load_gs_index   native_load_gs_index
+#endif
+
+/* Clear the 'TS' bit */
+#define clts()		(native_clts())
+
+#endif/* CONFIG_PARAVIRT */
+
+#define stts() write_cr0(read_cr0() | X86_CR0_TS)
+
+#endif /* __KERNEL__ */
+
+static inline void clflush(volatile void *__p)
+{
+	asm volatile("clflush %0" : "+m" (*(volatile char __force *)__p));
+}
+
+#define nop() asm volatile ("nop")
+
+void disable_hlt(void);
+void enable_hlt(void);
+
+void cpu_idle_wait(void);
+
+extern unsigned long arch_align_stack(unsigned long sp);
+extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
+
+void default_idle(void);
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ */
+#ifdef CONFIG_X86_32
+/*
+ * Some non-Intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
+#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
+#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+#else
+#define mb() 	asm volatile("mfence":::"memory")
+#define rmb()	asm volatile("lfence":::"memory")
+#define wmb()	asm volatile("sfence" ::: "memory")
+#endif
+
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like this where there are no data dependencies.
+ **/
+
+#define read_barrier_depends()	do { } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#ifdef CONFIG_X86_PPRO_FENCE
+# define smp_rmb()	rmb()
+#else
+# define smp_rmb()	barrier()
+#endif
+#ifdef CONFIG_X86_OOSTORE
+# define smp_wmb() 	wmb()
+#else
+# define smp_wmb()	barrier()
+#endif
+#define smp_read_barrier_depends()	read_barrier_depends()
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while (0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+#endif
+
+/*
+ * Stop RDTSC speculation. This is needed when you need to use RDTSC
+ * (or get_cycles or vread that possibly accesses the TSC) in a defined
+ * code region.
+ *
+ * (Could use an alternative three way for this if there was one.)
+ */
+static inline void rdtsc_barrier(void)
+{
+	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
+	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
+}
+
+#endif /* _ASM_X86_SYSTEM_H */
diff --git a/arch/x86/include/asm/system_64.h b/arch/x86/include/asm/system_64.h
new file mode 100644
index 0000000..1159e091
--- /dev/null
+++ b/arch/x86/include/asm/system_64.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_X86_SYSTEM_64_H
+#define _ASM_X86_SYSTEM_64_H
+
+#include <asm/segment.h>
+#include <asm/cmpxchg.h>
+
+
+static inline unsigned long read_cr8(void)
+{
+	unsigned long cr8;
+	asm volatile("movq %%cr8,%0" : "=r" (cr8));
+	return cr8;
+}
+
+static inline void write_cr8(unsigned long val)
+{
+	asm volatile("movq %0,%%cr8" :: "r" (val) : "memory");
+}
+
+#include <linux/irqflags.h>
+
+#endif /* _ASM_X86_SYSTEM_64_H */
diff --git a/arch/x86/include/asm/tce.h b/arch/x86/include/asm/tce.h
new file mode 100644
index 0000000..7a6677c
--- /dev/null
+++ b/arch/x86/include/asm/tce.h
@@ -0,0 +1,48 @@
+/*
+ * This file is derived from asm-powerpc/tce.h.
+ *
+ * Copyright (C) IBM Corporation, 2006
+ *
+ * Author: Muli Ben-Yehuda <muli@il.ibm.com>
+ * Author: Jon Mason <jdmason@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_X86_TCE_H
+#define _ASM_X86_TCE_H
+
+extern unsigned int specified_table_size;
+struct iommu_table;
+
+#define TCE_ENTRY_SIZE   8   /* in bytes */
+
+#define TCE_READ_SHIFT   0
+#define TCE_WRITE_SHIFT  1
+#define TCE_HUBID_SHIFT  2   /* unused */
+#define TCE_RSVD_SHIFT   8   /* unused */
+#define TCE_RPN_SHIFT    12
+#define TCE_UNUSED_SHIFT 48  /* unused */
+
+#define TCE_RPN_MASK     0x0000fffffffff000ULL
+
+extern void tce_build(struct iommu_table *tbl, unsigned long index,
+		      unsigned int npages, unsigned long uaddr, int direction);
+extern void tce_free(struct iommu_table *tbl, long index, unsigned int npages);
+extern void * __init alloc_tce_table(void);
+extern void __init free_tce_table(void *tbl);
+extern int __init build_tce_table(struct pci_dev *dev, void __iomem *bbar);
+
+#endif /* _ASM_X86_TCE_H */
diff --git a/arch/x86/include/asm/termbits.h b/arch/x86/include/asm/termbits.h
new file mode 100644
index 0000000..af1b70e
--- /dev/null
+++ b/arch/x86/include/asm/termbits.h
@@ -0,0 +1,198 @@
+#ifndef _ASM_X86_TERMBITS_H
+#define _ASM_X86_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define	   BOTHER 0010000		/* non standard rate */
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate */
+#define CMSPAR	  010000000000	/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000	/* flow control */
+
+#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* _ASM_X86_TERMBITS_H */
diff --git a/arch/x86/include/asm/termios.h b/arch/x86/include/asm/termios.h
new file mode 100644
index 0000000..f729563
--- /dev/null
+++ b/arch/x86/include/asm/termios.h
@@ -0,0 +1,113 @@
+#ifndef _ASM_X86_TERMIOS_H
+#define _ASM_X86_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+#include <asm/uaccess.h>
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+static inline int user_termio_to_kernel_termios(struct ktermios *termios,
+						struct termio __user *termio)
+{
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag);
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag);
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag);
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag);
+	return copy_from_user(termios->c_cc, termio->c_cc, NCC);
+}
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+static inline int kernel_termios_to_user_termio(struct termio __user *termio,
+					    struct ktermios *termios)
+{
+	put_user((termios)->c_iflag, &(termio)->c_iflag);
+	put_user((termios)->c_oflag, &(termio)->c_oflag);
+	put_user((termios)->c_cflag, &(termio)->c_cflag);
+	put_user((termios)->c_lflag, &(termio)->c_lflag);
+	put_user((termios)->c_line,  &(termio)->c_line);
+	return copy_to_user((termio)->c_cc, (termios)->c_cc, NCC);
+}
+
+static inline int user_termios_to_kernel_termios(struct ktermios *k,
+						 struct termios2 __user *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios2));
+}
+
+static inline int kernel_termios_to_user_termios(struct termios2 __user *u,
+						 struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios2));
+}
+
+static inline int user_termios_to_kernel_termios_1(struct ktermios *k,
+						   struct termios __user *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios));
+}
+
+static inline int kernel_termios_to_user_termios_1(struct termios __user *u,
+						   struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios));
+}
+
+#endif	/* __KERNEL__ */
+
+#endif /* _ASM_X86_TERMIOS_H */
diff --git a/arch/x86/include/asm/therm_throt.h b/arch/x86/include/asm/therm_throt.h
new file mode 100644
index 0000000..c62349e
--- /dev/null
+++ b/arch/x86/include/asm/therm_throt.h
@@ -0,0 +1,9 @@
+#ifndef _ASM_X86_THERM_THROT_H
+#define _ASM_X86_THERM_THROT_H
+
+#include <asm/atomic.h>
+
+extern atomic_t therm_throt_en;
+int therm_throt_process(int curr);
+
+#endif /* _ASM_X86_THERM_THROT_H */
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
new file mode 100644
index 0000000..e44d379
--- /dev/null
+++ b/arch/x86/include/asm/thread_info.h
@@ -0,0 +1,264 @@
+/* thread_info.h: low-level thread information
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_X86_THREAD_INFO_H
+#define _ASM_X86_THREAD_INFO_H
+
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/types.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ */
+#ifndef __ASSEMBLY__
+struct task_struct;
+struct exec_domain;
+#include <asm/processor.h>
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	__u32			status;		/* thread synchronous flags */
+	__u32			cpu;		/* current CPU */
+	int			preempt_count;	/* 0 => preemptable,
+						   <0 => BUG */
+	mm_segment_t		addr_limit;
+	struct restart_block    restart_block;
+	void __user		*sysenter_return;
+#ifdef CONFIG_X86_32
+	unsigned long           previous_esp;   /* ESP of the previous stack in
+						   case of nested (IRQ) stacks
+						*/
+	__u8			supervisor_stack[0];
+#endif
+};
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+#else /* !__ASSEMBLY__ */
+
+#include <asm/asm-offsets.h>
+
+#endif
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files
+ *   may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ * Warning: layout of LSW is hardcoded in entry.S
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_SINGLESTEP		4	/* reenable singlestep on user return*/
+#define TIF_IRET		5	/* force IRET */
+#define TIF_SYSCALL_EMU		6	/* syscall emulation active */
+#define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
+#define TIF_SECCOMP		8	/* secure computing */
+#define TIF_MCE_NOTIFY		10	/* notify userspace of an MCE */
+#define TIF_NOTSC		16	/* TSC is not accessible in userland */
+#define TIF_IA32		17	/* 32bit process */
+#define TIF_FORK		18	/* ret_from_fork */
+#define TIF_ABI_PENDING		19
+#define TIF_MEMDIE		20
+#define TIF_DEBUG		21	/* uses debug registers */
+#define TIF_IO_BITMAP		22	/* uses I/O bitmap */
+#define TIF_FREEZE		23	/* is freezing for suspend */
+#define TIF_FORCED_TF		24	/* true if TF in eflags artificially */
+#define TIF_DEBUGCTLMSR		25	/* uses thread_struct.debugctlmsr */
+#define TIF_DS_AREA_MSR		26      /* uses thread_struct.ds_area_msr */
+#define TIF_BTS_TRACE_TS	27      /* record scheduling event timestamps */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_IRET		(1 << TIF_IRET)
+#define _TIF_SYSCALL_EMU	(1 << TIF_SYSCALL_EMU)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
+#define _TIF_MCE_NOTIFY		(1 << TIF_MCE_NOTIFY)
+#define _TIF_NOTSC		(1 << TIF_NOTSC)
+#define _TIF_IA32		(1 << TIF_IA32)
+#define _TIF_FORK		(1 << TIF_FORK)
+#define _TIF_ABI_PENDING	(1 << TIF_ABI_PENDING)
+#define _TIF_DEBUG		(1 << TIF_DEBUG)
+#define _TIF_IO_BITMAP		(1 << TIF_IO_BITMAP)
+#define _TIF_FREEZE		(1 << TIF_FREEZE)
+#define _TIF_FORCED_TF		(1 << TIF_FORCED_TF)
+#define _TIF_DEBUGCTLMSR	(1 << TIF_DEBUGCTLMSR)
+#define _TIF_DS_AREA_MSR	(1 << TIF_DS_AREA_MSR)
+#define _TIF_BTS_TRACE_TS	(1 << TIF_BTS_TRACE_TS)
+
+/* work to do in syscall_trace_enter() */
+#define _TIF_WORK_SYSCALL_ENTRY	\
+	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | \
+	 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | _TIF_SINGLESTEP)
+
+/* work to do in syscall_trace_leave() */
+#define _TIF_WORK_SYSCALL_EXIT	\
+	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK							\
+	(0x0000FFFF &							\
+	 ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|			\
+	   _TIF_SINGLESTEP|_TIF_SECCOMP|_TIF_SYSCALL_EMU))
+
+/* work to do on any return to user space */
+#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP)
+
+/* Only used for 64 bit */
+#define _TIF_DO_NOTIFY_MASK						\
+	(_TIF_SIGPENDING|_TIF_MCE_NOTIFY|_TIF_NOTIFY_RESUME)
+
+/* flags to check in __switch_to() */
+#define _TIF_WORK_CTXSW							\
+	(_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS| \
+								_TIF_NOTSC)
+
+#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW
+#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG)
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO)
+#else
+#define THREAD_FLAGS GFP_KERNEL
+#endif
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+#define alloc_thread_info(tsk)						\
+	((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER))
+
+#ifdef CONFIG_X86_32
+
+#define STACK_WARN	(THREAD_SIZE/8)
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+
+/* how to get the current stack pointer from C */
+register unsigned long current_stack_pointer asm("esp") __used;
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	return (struct thread_info *)
+		(current_stack_pointer & ~(THREAD_SIZE - 1));
+}
+
+#else /* !__ASSEMBLY__ */
+
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg)	 \
+	movl $-THREAD_SIZE, reg; \
+	andl %esp, reg
+
+/* use this one if reg already contains %esp */
+#define GET_THREAD_INFO_WITH_ESP(reg) \
+	andl $-THREAD_SIZE, reg
+
+#endif
+
+#else /* X86_32 */
+
+#include <asm/pda.h>
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE);
+	return ti;
+}
+
+/* do not use in interrupt context */
+static inline struct thread_info *stack_thread_info(void)
+{
+	struct thread_info *ti;
+	asm("andq %%rsp,%0; " : "=r" (ti) : "0" (~(THREAD_SIZE - 1)));
+	return ti;
+}
+
+#else /* !__ASSEMBLY__ */
+
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg) \
+	movq %gs:pda_kernelstack,reg ; \
+	subq $(THREAD_SIZE-PDA_STACKOFFSET),reg
+
+#endif
+
+#endif /* !X86_32 */
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_USEDFPU		0x0001	/* FPU was used by this task
+					   this quantum (SMP) */
+#define TS_COMPAT		0x0002	/* 32bit syscall active (64BIT)*/
+#define TS_POLLING		0x0004	/* true if in idle loop
+					   and not sleeping */
+#define TS_RESTORE_SIGMASK	0x0008	/* restore signal mask in do_signal() */
+#define TS_XSAVE		0x0010	/* Use xsave/xrstor */
+
+#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK	1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->status |= TS_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags);
+}
+#endif	/* !__ASSEMBLY__ */
+
+#ifndef __ASSEMBLY__
+extern void arch_task_cache_init(void);
+extern void free_thread_info(struct thread_info *ti);
+extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
+#define arch_task_cache_init arch_task_cache_init
+#endif
+#endif /* _ASM_X86_THREAD_INFO_H */
diff --git a/arch/x86/include/asm/time.h b/arch/x86/include/asm/time.h
new file mode 100644
index 0000000..50c733a
--- /dev/null
+++ b/arch/x86/include/asm/time.h
@@ -0,0 +1,63 @@
+#ifndef _ASM_X86_TIME_H
+#define _ASM_X86_TIME_H
+
+extern void hpet_time_init(void);
+
+#include <asm/mc146818rtc.h>
+#ifdef CONFIG_X86_32
+#include <linux/efi.h>
+
+static inline unsigned long native_get_wallclock(void)
+{
+	unsigned long retval;
+
+	if (efi_enabled)
+		retval = efi_get_time();
+	else
+		retval = mach_get_cmos_time();
+
+	return retval;
+}
+
+static inline int native_set_wallclock(unsigned long nowtime)
+{
+	int retval;
+
+	if (efi_enabled)
+		retval = efi_set_rtc_mmss(nowtime);
+	else
+		retval = mach_set_rtc_mmss(nowtime);
+
+	return retval;
+}
+
+#else
+extern void native_time_init_hook(void);
+
+static inline unsigned long native_get_wallclock(void)
+{
+	return mach_get_cmos_time();
+}
+
+static inline int native_set_wallclock(unsigned long nowtime)
+{
+	return mach_set_rtc_mmss(nowtime);
+}
+
+#endif
+
+extern void time_init(void);
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else /* !CONFIG_PARAVIRT */
+
+#define get_wallclock() native_get_wallclock()
+#define set_wallclock(x) native_set_wallclock(x)
+#define choose_time_init() hpet_time_init
+
+#endif /* CONFIG_PARAVIRT */
+
+extern unsigned long __init calibrate_cpu(void);
+
+#endif /* _ASM_X86_TIME_H */
diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h
new file mode 100644
index 0000000..2bb6a83
--- /dev/null
+++ b/arch/x86/include/asm/timer.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_X86_TIMER_H
+#define _ASM_X86_TIMER_H
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/percpu.h>
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+unsigned long long native_sched_clock(void);
+unsigned long native_calibrate_tsc(void);
+
+#ifdef CONFIG_X86_32
+extern int timer_ack;
+extern int recalibrate_cpu_khz(void);
+#endif /* CONFIG_X86_32 */
+
+extern int no_timer_check;
+
+#ifndef CONFIG_PARAVIRT
+#define calibrate_tsc() native_calibrate_tsc()
+#endif
+
+/* Accelerators for sched_clock()
+ * convert from cycles(64bits) => nanoseconds (64bits)
+ *  basic equation:
+ *		ns = cycles / (freq / ns_per_sec)
+ *		ns = cycles * (ns_per_sec / freq)
+ *		ns = cycles * (10^9 / (cpu_khz * 10^3))
+ *		ns = cycles * (10^6 / cpu_khz)
+ *
+ *	Then we use scaling math (suggested by george@mvista.com) to get:
+ *		ns = cycles * (10^6 * SC / cpu_khz) / SC
+ *		ns = cycles * cyc2ns_scale / SC
+ *
+ *	And since SC is a constant power of two, we can convert the div
+ *  into a shift.
+ *
+ *  We can use khz divisor instead of mhz to keep a better precision, since
+ *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ *  (mathieu.desnoyers@polymtl.ca)
+ *
+ *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
+ */
+
+DECLARE_PER_CPU(unsigned long, cyc2ns);
+
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+
+static inline unsigned long long __cycles_2_ns(unsigned long long cyc)
+{
+	return cyc * per_cpu(cyc2ns, smp_processor_id()) >> CYC2NS_SCALE_FACTOR;
+}
+
+static inline unsigned long long cycles_2_ns(unsigned long long cyc)
+{
+	unsigned long long ns;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ns = __cycles_2_ns(cyc);
+	local_irq_restore(flags);
+
+	return ns;
+}
+
+#endif /* _ASM_X86_TIMER_H */
diff --git a/arch/x86/include/asm/timex.h b/arch/x86/include/asm/timex.h
new file mode 100644
index 0000000..1287dc1
--- /dev/null
+++ b/arch/x86/include/asm/timex.h
@@ -0,0 +1,19 @@
+/* x86 architecture timex specifications */
+#ifndef _ASM_X86_TIMEX_H
+#define _ASM_X86_TIMEX_H
+
+#include <asm/processor.h>
+#include <asm/tsc.h>
+
+#ifdef CONFIG_X86_ELAN
+#  define PIT_TICK_RATE 1189200 /* AMD Elan has different frequency! */
+#elif defined(CONFIG_X86_RDC321X)
+#  define PIT_TICK_RATE 1041667 /* Underlying HZ for R8610 */
+#else
+#  define PIT_TICK_RATE 1193182 /* Underlying HZ */
+#endif
+#define CLOCK_TICK_RATE	PIT_TICK_RATE
+
+#define ARCH_HAS_READ_CURRENT_TIMER
+
+#endif /* _ASM_X86_TIMEX_H */
diff --git a/arch/x86/include/asm/tlb.h b/arch/x86/include/asm/tlb.h
new file mode 100644
index 0000000..829215f
--- /dev/null
+++ b/arch/x86/include/asm/tlb.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_X86_TLB_H
+#define _ASM_X86_TLB_H
+
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_X86_TLB_H */
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
new file mode 100644
index 0000000..0e7bbb5
--- /dev/null
+++ b/arch/x86/include/asm/tlbflush.h
@@ -0,0 +1,178 @@
+#ifndef _ASM_X86_TLBFLUSH_H
+#define _ASM_X86_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define __flush_tlb() __native_flush_tlb()
+#define __flush_tlb_global() __native_flush_tlb_global()
+#define __flush_tlb_single(addr) __native_flush_tlb_single(addr)
+#endif
+
+static inline void __native_flush_tlb(void)
+{
+	write_cr3(read_cr3());
+}
+
+static inline void __native_flush_tlb_global(void)
+{
+	unsigned long flags;
+	unsigned long cr4;
+
+	/*
+	 * Read-modify-write to CR4 - protect it from preemption and
+	 * from interrupts. (Use the raw variant because this code can
+	 * be called from deep inside debugging code.)
+	 */
+	raw_local_irq_save(flags);
+
+	cr4 = read_cr4();
+	/* clear PGE */
+	write_cr4(cr4 & ~X86_CR4_PGE);
+	/* write old PGE again and flush TLBs */
+	write_cr4(cr4);
+
+	raw_local_irq_restore(flags);
+}
+
+static inline void __native_flush_tlb_single(unsigned long addr)
+{
+	asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
+}
+
+static inline void __flush_tlb_all(void)
+{
+	if (cpu_has_pge)
+		__flush_tlb_global();
+	else
+		__flush_tlb();
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+	if (cpu_has_invlpg)
+		__flush_tlb_single(addr);
+	else
+		__flush_tlb();
+}
+
+#ifdef CONFIG_X86_32
+# define TLB_FLUSH_ALL	0xffffffff
+#else
+# define TLB_FLUSH_ALL	-1ULL
+#endif
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ *  - flush_tlb_others(cpumask, mm, va) flushes TLBs on other cpus
+ *
+ * ..but the i386 has somewhat limited tlb flushing capabilities,
+ * and page-granular flushes are available only on i486 and up.
+ *
+ * x86-64 can only flush individual pages or full VMs. For a range flush
+ * we always do the full VM. Might be worth trying if for a small
+ * range a few INVLPGs in a row are a win.
+ */
+
+#ifndef CONFIG_SMP
+
+#define flush_tlb() __flush_tlb()
+#define flush_tlb_all() __flush_tlb_all()
+#define local_flush_tlb() __flush_tlb()
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	if (mm == current->active_mm)
+		__flush_tlb();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long addr)
+{
+	if (vma->vm_mm == current->active_mm)
+		__flush_tlb_one(addr);
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+	if (vma->vm_mm == current->active_mm)
+		__flush_tlb();
+}
+
+static inline void native_flush_tlb_others(const cpumask_t *cpumask,
+					   struct mm_struct *mm,
+					   unsigned long va)
+{
+}
+
+static inline void reset_lazy_tlbstate(void)
+{
+}
+
+#else  /* SMP */
+
+#include <asm/smp.h>
+
+#define local_flush_tlb() __flush_tlb()
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_current_task(void);
+extern void flush_tlb_mm(struct mm_struct *);
+extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
+
+#define flush_tlb()	flush_tlb_current_task()
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+	flush_tlb_mm(vma->vm_mm);
+}
+
+void native_flush_tlb_others(const cpumask_t *cpumask, struct mm_struct *mm,
+			     unsigned long va);
+
+#define TLBSTATE_OK	1
+#define TLBSTATE_LAZY	2
+
+#ifdef CONFIG_X86_32
+struct tlb_state {
+	struct mm_struct *active_mm;
+	int state;
+	char __cacheline_padding[L1_CACHE_BYTES-8];
+};
+DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate);
+
+void reset_lazy_tlbstate(void);
+#else
+static inline void reset_lazy_tlbstate(void)
+{
+}
+#endif
+
+#endif	/* SMP */
+
+#ifndef CONFIG_PARAVIRT
+#define flush_tlb_others(mask, mm, va)	native_flush_tlb_others(&mask, mm, va)
+#endif
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+	flush_tlb_all();
+}
+
+#endif /* _ASM_X86_TLBFLUSH_H */
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
new file mode 100644
index 0000000..90ac771
--- /dev/null
+++ b/arch/x86/include/asm/topology.h
@@ -0,0 +1,258 @@
+/*
+ * Written by: Matthew Dobson, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ */
+#ifndef _ASM_X86_TOPOLOGY_H
+#define _ASM_X86_TOPOLOGY_H
+
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_X86_HT
+#  define ENABLE_TOPO_DEFINES
+# endif
+#else
+# ifdef CONFIG_SMP
+#  define ENABLE_TOPO_DEFINES
+# endif
+#endif
+
+/* Node not present */
+#define NUMA_NO_NODE	(-1)
+
+#ifdef CONFIG_NUMA
+#include <linux/cpumask.h>
+#include <asm/mpspec.h>
+
+#ifdef CONFIG_X86_32
+
+/* Mappings between node number and cpus on that node. */
+extern cpumask_t node_to_cpumask_map[];
+
+/* Mappings between logical cpu number and node number */
+extern int cpu_to_node_map[];
+
+/* Returns the number of the node containing CPU 'cpu' */
+static inline int cpu_to_node(int cpu)
+{
+	return cpu_to_node_map[cpu];
+}
+#define early_cpu_to_node(cpu)	cpu_to_node(cpu)
+
+/* Returns a bitmask of CPUs on Node 'node'.
+ *
+ * Side note: this function creates the returned cpumask on the stack
+ * so with a high NR_CPUS count, excessive stack space is used.  The
+ * node_to_cpumask_ptr function should be used whenever possible.
+ */
+static inline cpumask_t node_to_cpumask(int node)
+{
+	return node_to_cpumask_map[node];
+}
+
+#else /* CONFIG_X86_64 */
+
+/* Mappings between node number and cpus on that node. */
+extern cpumask_t *node_to_cpumask_map;
+
+/* Mappings between logical cpu number and node number */
+DECLARE_EARLY_PER_CPU(int, x86_cpu_to_node_map);
+
+/* Returns the number of the current Node. */
+#define numa_node_id()		read_pda(nodenumber)
+
+#ifdef CONFIG_DEBUG_PER_CPU_MAPS
+extern int cpu_to_node(int cpu);
+extern int early_cpu_to_node(int cpu);
+extern const cpumask_t *_node_to_cpumask_ptr(int node);
+extern cpumask_t node_to_cpumask(int node);
+
+#else	/* !CONFIG_DEBUG_PER_CPU_MAPS */
+
+/* Returns the number of the node containing CPU 'cpu' */
+static inline int cpu_to_node(int cpu)
+{
+	return per_cpu(x86_cpu_to_node_map, cpu);
+}
+
+/* Same function but used if called before per_cpu areas are setup */
+static inline int early_cpu_to_node(int cpu)
+{
+	if (early_per_cpu_ptr(x86_cpu_to_node_map))
+		return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
+
+	return per_cpu(x86_cpu_to_node_map, cpu);
+}
+
+/* Returns a pointer to the cpumask of CPUs on Node 'node'. */
+static inline const cpumask_t *_node_to_cpumask_ptr(int node)
+{
+	return &node_to_cpumask_map[node];
+}
+
+/* Returns a bitmask of CPUs on Node 'node'. */
+static inline cpumask_t node_to_cpumask(int node)
+{
+	return node_to_cpumask_map[node];
+}
+
+#endif /* !CONFIG_DEBUG_PER_CPU_MAPS */
+
+/* Replace default node_to_cpumask_ptr with optimized version */
+#define node_to_cpumask_ptr(v, node)		\
+		const cpumask_t *v = _node_to_cpumask_ptr(node)
+
+#define node_to_cpumask_ptr_next(v, node)	\
+			   v = _node_to_cpumask_ptr(node)
+
+#endif /* CONFIG_X86_64 */
+
+/*
+ * Returns the number of the node containing Node 'node'. This
+ * architecture is flat, so it is a pretty simple function!
+ */
+#define parent_node(node) (node)
+
+#define pcibus_to_node(bus) __pcibus_to_node(bus)
+#define pcibus_to_cpumask(bus) __pcibus_to_cpumask(bus)
+
+#ifdef CONFIG_X86_32
+extern unsigned long node_start_pfn[];
+extern unsigned long node_end_pfn[];
+extern unsigned long node_remap_size[];
+#define node_has_online_mem(nid) (node_start_pfn[nid] != node_end_pfn[nid])
+
+# define SD_CACHE_NICE_TRIES	1
+# define SD_IDLE_IDX		1
+# define SD_NEWIDLE_IDX		2
+# define SD_FORKEXEC_IDX	0
+
+#else
+
+# define SD_CACHE_NICE_TRIES	2
+# define SD_IDLE_IDX		2
+# define SD_NEWIDLE_IDX		2
+# define SD_FORKEXEC_IDX	1
+
+#endif
+
+/* sched_domains SD_NODE_INIT for NUMAQ machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= SD_CACHE_NICE_TRIES,	\
+	.busy_idx		= 3,			\
+	.idle_idx		= SD_IDLE_IDX,		\
+	.newidle_idx		= SD_NEWIDLE_IDX,	\
+	.wake_idx		= 1,			\
+	.forkexec_idx		= SD_FORKEXEC_IDX,	\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_FORK	\
+				| SD_SERIALIZE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+}
+
+#ifdef CONFIG_X86_64_ACPI_NUMA
+extern int __node_distance(int, int);
+#define node_distance(a, b) __node_distance(a, b)
+#endif
+
+#else /* !CONFIG_NUMA */
+
+#define numa_node_id()		0
+#define	cpu_to_node(cpu)	0
+#define	early_cpu_to_node(cpu)	0
+
+static inline const cpumask_t *_node_to_cpumask_ptr(int node)
+{
+	return &cpu_online_map;
+}
+static inline cpumask_t node_to_cpumask(int node)
+{
+	return cpu_online_map;
+}
+static inline int node_to_first_cpu(int node)
+{
+	return first_cpu(cpu_online_map);
+}
+
+/* Replace default node_to_cpumask_ptr with optimized version */
+#define node_to_cpumask_ptr(v, node)		\
+		const cpumask_t *v = _node_to_cpumask_ptr(node)
+
+#define node_to_cpumask_ptr_next(v, node)	\
+			   v = _node_to_cpumask_ptr(node)
+#endif
+
+#include <asm-generic/topology.h>
+
+#ifdef CONFIG_NUMA
+/* Returns the number of the first CPU on Node 'node'. */
+static inline int node_to_first_cpu(int node)
+{
+	node_to_cpumask_ptr(mask, node);
+	return first_cpu(*mask);
+}
+#endif
+
+extern cpumask_t cpu_coregroup_map(int cpu);
+
+#ifdef ENABLE_TOPO_DEFINES
+#define topology_physical_package_id(cpu)	(cpu_data(cpu).phys_proc_id)
+#define topology_core_id(cpu)			(cpu_data(cpu).cpu_core_id)
+#define topology_core_siblings(cpu)		(per_cpu(cpu_core_map, cpu))
+#define topology_thread_siblings(cpu)		(per_cpu(cpu_sibling_map, cpu))
+
+/* indicates that pointers to the topology cpumask_t maps are valid */
+#define arch_provides_topology_pointers		yes
+#endif
+
+static inline void arch_fix_phys_package_id(int num, u32 slot)
+{
+}
+
+struct pci_bus;
+void set_pci_bus_resources_arch_default(struct pci_bus *b);
+
+#ifdef CONFIG_SMP
+#define mc_capable()			(boot_cpu_data.x86_max_cores > 1)
+#define smt_capable()			(smp_num_siblings > 1)
+#endif
+
+#ifdef CONFIG_NUMA
+extern int get_mp_bus_to_node(int busnum);
+extern void set_mp_bus_to_node(int busnum, int node);
+#else
+static inline int get_mp_bus_to_node(int busnum)
+{
+	return 0;
+}
+static inline void set_mp_bus_to_node(int busnum, int node)
+{
+}
+#endif
+
+#endif /* _ASM_X86_TOPOLOGY_H */
diff --git a/arch/x86/include/asm/trampoline.h b/arch/x86/include/asm/trampoline.h
new file mode 100644
index 0000000..fa0d79fac
--- /dev/null
+++ b/arch/x86/include/asm/trampoline.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_X86_TRAMPOLINE_H
+#define _ASM_X86_TRAMPOLINE_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Trampoline 80x86 program as an array.
+ */
+extern const unsigned char trampoline_data [];
+extern const unsigned char trampoline_end  [];
+extern unsigned char *trampoline_base;
+
+extern unsigned long init_rsp;
+extern unsigned long initial_code;
+
+#define TRAMPOLINE_BASE 0x6000
+extern unsigned long setup_trampoline(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_TRAMPOLINE_H */
diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
new file mode 100644
index 0000000..45dee28
--- /dev/null
+++ b/arch/x86/include/asm/traps.h
@@ -0,0 +1,81 @@
+#ifndef _ASM_X86_TRAPS_H
+#define _ASM_X86_TRAPS_H
+
+#include <asm/debugreg.h>
+
+#ifdef CONFIG_X86_32
+#define dotraplinkage
+#else
+#define dotraplinkage asmlinkage
+#endif
+
+asmlinkage void divide_error(void);
+asmlinkage void debug(void);
+asmlinkage void nmi(void);
+asmlinkage void int3(void);
+asmlinkage void overflow(void);
+asmlinkage void bounds(void);
+asmlinkage void invalid_op(void);
+asmlinkage void device_not_available(void);
+#ifdef CONFIG_X86_64
+asmlinkage void double_fault(void);
+#endif
+asmlinkage void coprocessor_segment_overrun(void);
+asmlinkage void invalid_TSS(void);
+asmlinkage void segment_not_present(void);
+asmlinkage void stack_segment(void);
+asmlinkage void general_protection(void);
+asmlinkage void page_fault(void);
+asmlinkage void spurious_interrupt_bug(void);
+asmlinkage void coprocessor_error(void);
+asmlinkage void alignment_check(void);
+#ifdef CONFIG_X86_MCE
+asmlinkage void machine_check(void);
+#endif /* CONFIG_X86_MCE */
+asmlinkage void simd_coprocessor_error(void);
+
+dotraplinkage void do_divide_error(struct pt_regs *, long);
+dotraplinkage void do_debug(struct pt_regs *, long);
+dotraplinkage void do_nmi(struct pt_regs *, long);
+dotraplinkage void do_int3(struct pt_regs *, long);
+dotraplinkage void do_overflow(struct pt_regs *, long);
+dotraplinkage void do_bounds(struct pt_regs *, long);
+dotraplinkage void do_invalid_op(struct pt_regs *, long);
+dotraplinkage void do_device_not_available(struct pt_regs *, long);
+dotraplinkage void do_coprocessor_segment_overrun(struct pt_regs *, long);
+dotraplinkage void do_invalid_TSS(struct pt_regs *, long);
+dotraplinkage void do_segment_not_present(struct pt_regs *, long);
+dotraplinkage void do_stack_segment(struct pt_regs *, long);
+dotraplinkage void do_general_protection(struct pt_regs *, long);
+dotraplinkage void do_page_fault(struct pt_regs *, unsigned long);
+dotraplinkage void do_spurious_interrupt_bug(struct pt_regs *, long);
+dotraplinkage void do_coprocessor_error(struct pt_regs *, long);
+dotraplinkage void do_alignment_check(struct pt_regs *, long);
+#ifdef CONFIG_X86_MCE
+dotraplinkage void do_machine_check(struct pt_regs *, long);
+#endif
+dotraplinkage void do_simd_coprocessor_error(struct pt_regs *, long);
+#ifdef CONFIG_X86_32
+dotraplinkage void do_iret_error(struct pt_regs *, long);
+#endif
+
+static inline int get_si_code(unsigned long condition)
+{
+	if (condition & DR_STEP)
+		return TRAP_TRACE;
+	else if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3))
+		return TRAP_HWBKPT;
+	else
+		return TRAP_BRKPT;
+}
+
+extern int panic_on_unrecovered_nmi;
+extern int kstack_depth_to_print;
+
+#ifdef CONFIG_X86_32
+void math_error(void __user *);
+unsigned long patch_espfix_desc(unsigned long, unsigned long);
+asmlinkage void math_emulate(long);
+#endif
+
+#endif /* _ASM_X86_TRAPS_H */
diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h
new file mode 100644
index 0000000..38ae163
--- /dev/null
+++ b/arch/x86/include/asm/tsc.h
@@ -0,0 +1,62 @@
+/*
+ * x86 TSC related functions
+ */
+#ifndef _ASM_X86_TSC_H
+#define _ASM_X86_TSC_H
+
+#include <asm/processor.h>
+
+#define NS_SCALE	10 /* 2^10, carefully chosen */
+#define US_SCALE	32 /* 2^32, arbitralrily chosen */
+
+/*
+ * Standard way to access the cycle counter.
+ */
+typedef unsigned long long cycles_t;
+
+extern unsigned int cpu_khz;
+extern unsigned int tsc_khz;
+
+extern void disable_TSC(void);
+
+static inline cycles_t get_cycles(void)
+{
+	unsigned long long ret = 0;
+
+#ifndef CONFIG_X86_TSC
+	if (!cpu_has_tsc)
+		return 0;
+#endif
+	rdtscll(ret);
+
+	return ret;
+}
+
+static __always_inline cycles_t vget_cycles(void)
+{
+	/*
+	 * We only do VDSOs on TSC capable CPUs, so this shouldnt
+	 * access boot_cpu_data (which is not VDSO-safe):
+	 */
+#ifndef CONFIG_X86_TSC
+	if (!cpu_has_tsc)
+		return 0;
+#endif
+	return (cycles_t)__native_read_tsc();
+}
+
+extern void tsc_init(void);
+extern void mark_tsc_unstable(char *reason);
+extern int unsynchronized_tsc(void);
+int check_tsc_unstable(void);
+
+/*
+ * Boot-time check whether the TSCs are synchronized across
+ * all CPUs/cores:
+ */
+extern void check_tsc_sync_source(int cpu);
+extern void check_tsc_sync_target(void);
+
+extern int notsc_setup(char *);
+
+#endif /* _ASM_X86_TSC_H */
diff --git a/arch/x86/include/asm/types.h b/arch/x86/include/asm/types.h
new file mode 100644
index 0000000..e6f7363
--- /dev/null
+++ b/arch/x86/include/asm/types.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_X86_TYPES_H
+#define _ASM_X86_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#ifdef CONFIG_X86_32
+# define BITS_PER_LONG 32
+#else
+# define BITS_PER_LONG 64
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef u64 dma64_addr_t;
+#if defined(CONFIG_X86_64) || defined(CONFIG_HIGHMEM64G)
+/* DMA addresses come in 32-bit and 64-bit flavours. */
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_TYPES_H */
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
new file mode 100644
index 0000000..35c54921b
--- /dev/null
+++ b/arch/x86/include/asm/uaccess.h
@@ -0,0 +1,454 @@
+#ifndef _ASM_X86_UACCESS_H
+#define _ASM_X86_UACCESS_H
+/*
+ * User space memory access functions
+ */
+#include <linux/errno.h>
+#include <linux/compiler.h>
+#include <linux/thread_info.h>
+#include <linux/prefetch.h>
+#include <linux/string.h>
+#include <asm/asm.h>
+#include <asm/page.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+#define KERNEL_DS	MAKE_MM_SEG(-1UL)
+#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b)	((a).seg == (b).seg)
+
+#define __addr_ok(addr)					\
+	((unsigned long __force)(addr) <		\
+	 (current_thread_info()->addr_limit.seg))
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 0 if the range is valid, nonzero otherwise.
+ *
+ * This is equivalent to the following test:
+ * (u33)addr + (u33)size >= (u33)current->addr_limit.seg (u65 for x86_64)
+ *
+ * This needs 33-bit (65-bit for x86_64) arithmetic. We have a carry...
+ */
+
+#define __range_not_ok(addr, size)					\
+({									\
+	unsigned long flag, roksum;					\
+	__chk_user_ptr(addr);						\
+	asm("add %3,%1 ; sbb %0,%0 ; cmp %1,%4 ; sbb $0,%0"		\
+	    : "=&r" (flag), "=r" (roksum)				\
+	    : "1" (addr), "g" ((long)(size)),				\
+	      "rm" (current_thread_info()->addr_limit.seg));		\
+	flag;								\
+})
+
+/**
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE.  Note that
+ *        %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ *        to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+#define access_ok(type, addr, size) (likely(__range_not_ok(addr, size) == 0))
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+	unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ */
+
+extern int __get_user_1(void);
+extern int __get_user_2(void);
+extern int __get_user_4(void);
+extern int __get_user_8(void);
+extern int __get_user_bad(void);
+
+#define __get_user_x(size, ret, x, ptr)		      \
+	asm volatile("call __get_user_" #size	      \
+		     : "=a" (ret),"=d" (x)	      \
+		     : "0" (ptr))		      \
+
+/* Careful: we have to cast the result to the type of the pointer
+ * for sign reasons */
+
+/**
+ * get_user: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#ifdef CONFIG_X86_32
+#define __get_user_8(__ret_gu, __val_gu, ptr)				\
+		__get_user_x(X, __ret_gu, __val_gu, ptr)
+#else
+#define __get_user_8(__ret_gu, __val_gu, ptr)				\
+		__get_user_x(8, __ret_gu, __val_gu, ptr)
+#endif
+
+#define get_user(x, ptr)						\
+({									\
+	int __ret_gu;							\
+	unsigned long __val_gu;						\
+	__chk_user_ptr(ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1:								\
+		__get_user_x(1, __ret_gu, __val_gu, ptr);		\
+		break;							\
+	case 2:								\
+		__get_user_x(2, __ret_gu, __val_gu, ptr);		\
+		break;							\
+	case 4:								\
+		__get_user_x(4, __ret_gu, __val_gu, ptr);		\
+		break;							\
+	case 8:								\
+		__get_user_8(__ret_gu, __val_gu, ptr);			\
+		break;							\
+	default:							\
+		__get_user_x(X, __ret_gu, __val_gu, ptr);		\
+		break;							\
+	}								\
+	(x) = (__typeof__(*(ptr)))__val_gu;				\
+	__ret_gu;							\
+})
+
+#define __put_user_x(size, x, ptr, __ret_pu)			\
+	asm volatile("call __put_user_" #size : "=a" (__ret_pu)	\
+		     :"0" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
+
+
+
+#ifdef CONFIG_X86_32
+#define __put_user_u64(x, addr, err)					\
+	asm volatile("1:	movl %%eax,0(%2)\n"			\
+		     "2:	movl %%edx,4(%2)\n"			\
+		     "3:\n"						\
+		     ".section .fixup,\"ax\"\n"				\
+		     "4:	movl %3,%0\n"				\
+		     "	jmp 3b\n"					\
+		     ".previous\n"					\
+		     _ASM_EXTABLE(1b, 4b)				\
+		     _ASM_EXTABLE(2b, 4b)				\
+		     : "=r" (err)					\
+		     : "A" (x), "r" (addr), "i" (-EFAULT), "0" (err))
+
+#define __put_user_x8(x, ptr, __ret_pu)				\
+	asm volatile("call __put_user_8" : "=a" (__ret_pu)	\
+		     : "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
+#else
+#define __put_user_u64(x, ptr, retval) \
+	__put_user_asm(x, ptr, retval, "q", "", "Zr", -EFAULT)
+#define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
+#endif
+
+extern void __put_user_bad(void);
+
+/*
+ * Strange magic calling convention: pointer in %ecx,
+ * value in %eax(:%edx), return value in %eax. clobbers %rbx
+ */
+extern void __put_user_1(void);
+extern void __put_user_2(void);
+extern void __put_user_4(void);
+extern void __put_user_8(void);
+
+#ifdef CONFIG_X86_WP_WORKS_OK
+
+/**
+ * put_user: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x, ptr)					\
+({								\
+	int __ret_pu;						\
+	__typeof__(*(ptr)) __pu_val;				\
+	__chk_user_ptr(ptr);					\
+	__pu_val = x;						\
+	switch (sizeof(*(ptr))) {				\
+	case 1:							\
+		__put_user_x(1, __pu_val, ptr, __ret_pu);	\
+		break;						\
+	case 2:							\
+		__put_user_x(2, __pu_val, ptr, __ret_pu);	\
+		break;						\
+	case 4:							\
+		__put_user_x(4, __pu_val, ptr, __ret_pu);	\
+		break;						\
+	case 8:							\
+		__put_user_x8(__pu_val, ptr, __ret_pu);		\
+		break;						\
+	default:						\
+		__put_user_x(X, __pu_val, ptr, __ret_pu);	\
+		break;						\
+	}							\
+	__ret_pu;						\
+})
+
+#define __put_user_size(x, ptr, size, retval, errret)			\
+do {									\
+	retval = 0;							\
+	__chk_user_ptr(ptr);						\
+	switch (size) {							\
+	case 1:								\
+		__put_user_asm(x, ptr, retval, "b", "b", "iq", errret);	\
+		break;							\
+	case 2:								\
+		__put_user_asm(x, ptr, retval, "w", "w", "ir", errret);	\
+		break;							\
+	case 4:								\
+		__put_user_asm(x, ptr, retval, "l", "k",  "ir", errret);\
+		break;							\
+	case 8:								\
+		__put_user_u64((__typeof__(*ptr))(x), ptr, retval);	\
+		break;							\
+	default:							\
+		__put_user_bad();					\
+	}								\
+} while (0)
+
+#else
+
+#define __put_user_size(x, ptr, size, retval, errret)			\
+do {									\
+	__typeof__(*(ptr))__pus_tmp = x;				\
+	retval = 0;							\
+									\
+	if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0))	\
+		retval = errret;					\
+} while (0)
+
+#define put_user(x, ptr)					\
+({								\
+	int __ret_pu;						\
+	__typeof__(*(ptr))__pus_tmp = x;			\
+	__ret_pu = 0;						\
+	if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp,		\
+				       sizeof(*(ptr))) != 0))	\
+		__ret_pu = -EFAULT;				\
+	__ret_pu;						\
+})
+#endif
+
+#ifdef CONFIG_X86_32
+#define __get_user_asm_u64(x, ptr, retval, errret)	(x) = __get_user_bad()
+#else
+#define __get_user_asm_u64(x, ptr, retval, errret) \
+	 __get_user_asm(x, ptr, retval, "q", "", "=r", errret)
+#endif
+
+#define __get_user_size(x, ptr, size, retval, errret)			\
+do {									\
+	retval = 0;							\
+	__chk_user_ptr(ptr);						\
+	switch (size) {							\
+	case 1:								\
+		__get_user_asm(x, ptr, retval, "b", "b", "=q", errret);	\
+		break;							\
+	case 2:								\
+		__get_user_asm(x, ptr, retval, "w", "w", "=r", errret);	\
+		break;							\
+	case 4:								\
+		__get_user_asm(x, ptr, retval, "l", "k", "=r", errret);	\
+		break;							\
+	case 8:								\
+		__get_user_asm_u64(x, ptr, retval, errret);		\
+		break;							\
+	default:							\
+		(x) = __get_user_bad();					\
+	}								\
+} while (0)
+
+#define __get_user_asm(x, addr, err, itype, rtype, ltype, errret)	\
+	asm volatile("1:	mov"itype" %2,%"rtype"1\n"		\
+		     "2:\n"						\
+		     ".section .fixup,\"ax\"\n"				\
+		     "3:	mov %3,%0\n"				\
+		     "	xor"itype" %"rtype"1,%"rtype"1\n"		\
+		     "	jmp 2b\n"					\
+		     ".previous\n"					\
+		     _ASM_EXTABLE(1b, 3b)				\
+		     : "=r" (err), ltype(x)				\
+		     : "m" (__m(addr)), "i" (errret), "0" (err))
+
+#define __put_user_nocheck(x, ptr, size)			\
+({								\
+	long __pu_err;						\
+	__put_user_size((x), (ptr), (size), __pu_err, -EFAULT);	\
+	__pu_err;						\
+})
+
+#define __get_user_nocheck(x, ptr, size)				\
+({									\
+	long __gu_err;							\
+	unsigned long __gu_val;						\
+	__get_user_size(__gu_val, (ptr), (size), __gu_err, -EFAULT);	\
+	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
+	__gu_err;							\
+})
+
+/* FIXME: this hack is definitely wrong -AK */
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, itype, rtype, ltype, errret)	\
+	asm volatile("1:	mov"itype" %"rtype"1,%2\n"		\
+		     "2:\n"						\
+		     ".section .fixup,\"ax\"\n"				\
+		     "3:	mov %3,%0\n"				\
+		     "	jmp 2b\n"					\
+		     ".previous\n"					\
+		     _ASM_EXTABLE(1b, 3b)				\
+		     : "=r"(err)					\
+		     : ltype(x), "m" (__m(addr)), "i" (errret), "0" (err))
+/**
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+
+#define __get_user(x, ptr)						\
+	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+/**
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+
+#define __put_user(x, ptr)						\
+	__put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#define __get_user_unaligned __get_user
+#define __put_user_unaligned __put_user
+
+/*
+ * movsl can be slow when source and dest are not both 8-byte aligned
+ */
+#ifdef CONFIG_X86_INTEL_USERCOPY
+extern struct movsl_mask {
+	int mask;
+} ____cacheline_aligned_in_smp movsl_mask;
+#endif
+
+#define ARCH_HAS_NOCACHE_UACCESS 1
+
+#ifdef CONFIG_X86_32
+# include "uaccess_32.h"
+#else
+# define ARCH_HAS_SEARCH_EXTABLE
+# include "uaccess_64.h"
+#endif
+
+#endif /* _ASM_X86_UACCESS_H */
+
diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
new file mode 100644
index 0000000..d095a3a
--- /dev/null
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -0,0 +1,218 @@
+#ifndef _ASM_X86_UACCESS_32_H
+#define _ASM_X86_UACCESS_32_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/errno.h>
+#include <linux/thread_info.h>
+#include <linux/prefetch.h>
+#include <linux/string.h>
+#include <asm/asm.h>
+#include <asm/page.h>
+
+unsigned long __must_check __copy_to_user_ll
+		(void __user *to, const void *from, unsigned long n);
+unsigned long __must_check __copy_from_user_ll
+		(void *to, const void __user *from, unsigned long n);
+unsigned long __must_check __copy_from_user_ll_nozero
+		(void *to, const void __user *from, unsigned long n);
+unsigned long __must_check __copy_from_user_ll_nocache
+		(void *to, const void __user *from, unsigned long n);
+unsigned long __must_check __copy_from_user_ll_nocache_nozero
+		(void *to, const void __user *from, unsigned long n);
+
+/**
+ * __copy_to_user_inatomic: - Copy a block of data into user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.
+ *
+ * Copy data from kernel space to user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ * The caller should also make sure he pins the user space address
+ * so that the we don't result in page fault and sleep.
+ *
+ * Here we special-case 1, 2 and 4-byte copy_*_user invocations.  On a fault
+ * we return the initial request size (1, 2 or 4), as copy_*_user should do.
+ * If a store crosses a page boundary and gets a fault, the x86 will not write
+ * anything, so this is accurate.
+ */
+
+static __always_inline unsigned long __must_check
+__copy_to_user_inatomic(void __user *to, const void *from, unsigned long n)
+{
+	if (__builtin_constant_p(n)) {
+		unsigned long ret;
+
+		switch (n) {
+		case 1:
+			__put_user_size(*(u8 *)from, (u8 __user *)to,
+					1, ret, 1);
+			return ret;
+		case 2:
+			__put_user_size(*(u16 *)from, (u16 __user *)to,
+					2, ret, 2);
+			return ret;
+		case 4:
+			__put_user_size(*(u32 *)from, (u32 __user *)to,
+					4, ret, 4);
+			return ret;
+		}
+	}
+	return __copy_to_user_ll(to, from, n);
+}
+
+/**
+ * __copy_to_user: - Copy a block of data into user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+static __always_inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+       might_sleep();
+       return __copy_to_user_inatomic(to, from, n);
+}
+
+static __always_inline unsigned long
+__copy_from_user_inatomic(void *to, const void __user *from, unsigned long n)
+{
+	/* Avoid zeroing the tail if the copy fails..
+	 * If 'n' is constant and 1, 2, or 4, we do still zero on a failure,
+	 * but as the zeroing behaviour is only significant when n is not
+	 * constant, that shouldn't be a problem.
+	 */
+	if (__builtin_constant_p(n)) {
+		unsigned long ret;
+
+		switch (n) {
+		case 1:
+			__get_user_size(*(u8 *)to, from, 1, ret, 1);
+			return ret;
+		case 2:
+			__get_user_size(*(u16 *)to, from, 2, ret, 2);
+			return ret;
+		case 4:
+			__get_user_size(*(u32 *)to, from, 4, ret, 4);
+			return ret;
+		}
+	}
+	return __copy_from_user_ll_nozero(to, from, n);
+}
+
+/**
+ * __copy_from_user: - Copy a block of data from user space, with less checking.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ *
+ * An alternate version - __copy_from_user_inatomic() - may be called from
+ * atomic context and will fail rather than sleep.  In this case the
+ * uncopied bytes will *NOT* be padded with zeros.  See fs/filemap.h
+ * for explanation of why this is needed.
+ */
+static __always_inline unsigned long
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	might_sleep();
+	if (__builtin_constant_p(n)) {
+		unsigned long ret;
+
+		switch (n) {
+		case 1:
+			__get_user_size(*(u8 *)to, from, 1, ret, 1);
+			return ret;
+		case 2:
+			__get_user_size(*(u16 *)to, from, 2, ret, 2);
+			return ret;
+		case 4:
+			__get_user_size(*(u32 *)to, from, 4, ret, 4);
+			return ret;
+		}
+	}
+	return __copy_from_user_ll(to, from, n);
+}
+
+static __always_inline unsigned long __copy_from_user_nocache(void *to,
+				const void __user *from, unsigned long n)
+{
+	might_sleep();
+	if (__builtin_constant_p(n)) {
+		unsigned long ret;
+
+		switch (n) {
+		case 1:
+			__get_user_size(*(u8 *)to, from, 1, ret, 1);
+			return ret;
+		case 2:
+			__get_user_size(*(u16 *)to, from, 2, ret, 2);
+			return ret;
+		case 4:
+			__get_user_size(*(u32 *)to, from, 4, ret, 4);
+			return ret;
+		}
+	}
+	return __copy_from_user_ll_nocache(to, from, n);
+}
+
+static __always_inline unsigned long
+__copy_from_user_inatomic_nocache(void *to, const void __user *from,
+				  unsigned long n)
+{
+       return __copy_from_user_ll_nocache_nozero(to, from, n);
+}
+
+unsigned long __must_check copy_to_user(void __user *to,
+					const void *from, unsigned long n);
+unsigned long __must_check copy_from_user(void *to,
+					  const void __user *from,
+					  unsigned long n);
+long __must_check strncpy_from_user(char *dst, const char __user *src,
+				    long count);
+long __must_check __strncpy_from_user(char *dst,
+				      const char __user *src, long count);
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+#define strlen_user(str) strnlen_user(str, LONG_MAX)
+
+long strnlen_user(const char __user *str, long n);
+unsigned long __must_check clear_user(void __user *mem, unsigned long len);
+unsigned long __must_check __clear_user(void __user *mem, unsigned long len);
+
+#endif /* _ASM_X86_UACCESS_32_H */
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
new file mode 100644
index 0000000..664f152
--- /dev/null
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -0,0 +1,202 @@
+#ifndef _ASM_X86_UACCESS_64_H
+#define _ASM_X86_UACCESS_64_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/prefetch.h>
+#include <linux/lockdep.h>
+#include <asm/page.h>
+
+/*
+ * Copy To/From Userspace
+ */
+
+/* Handles exceptions in both to and from, but doesn't do access_ok */
+__must_check unsigned long
+copy_user_generic(void *to, const void *from, unsigned len);
+
+__must_check unsigned long
+copy_to_user(void __user *to, const void *from, unsigned len);
+__must_check unsigned long
+copy_from_user(void *to, const void __user *from, unsigned len);
+__must_check unsigned long
+copy_in_user(void __user *to, const void __user *from, unsigned len);
+
+static __always_inline __must_check
+int __copy_from_user(void *dst, const void __user *src, unsigned size)
+{
+	int ret = 0;
+	if (!__builtin_constant_p(size))
+		return copy_user_generic(dst, (__force void *)src, size);
+	switch (size) {
+	case 1:__get_user_asm(*(u8 *)dst, (u8 __user *)src,
+			      ret, "b", "b", "=q", 1);
+		return ret;
+	case 2:__get_user_asm(*(u16 *)dst, (u16 __user *)src,
+			      ret, "w", "w", "=r", 2);
+		return ret;
+	case 4:__get_user_asm(*(u32 *)dst, (u32 __user *)src,
+			      ret, "l", "k", "=r", 4);
+		return ret;
+	case 8:__get_user_asm(*(u64 *)dst, (u64 __user *)src,
+			      ret, "q", "", "=r", 8);
+		return ret;
+	case 10:
+		__get_user_asm(*(u64 *)dst, (u64 __user *)src,
+			       ret, "q", "", "=r", 16);
+		if (unlikely(ret))
+			return ret;
+		__get_user_asm(*(u16 *)(8 + (char *)dst),
+			       (u16 __user *)(8 + (char __user *)src),
+			       ret, "w", "w", "=r", 2);
+		return ret;
+	case 16:
+		__get_user_asm(*(u64 *)dst, (u64 __user *)src,
+			       ret, "q", "", "=r", 16);
+		if (unlikely(ret))
+			return ret;
+		__get_user_asm(*(u64 *)(8 + (char *)dst),
+			       (u64 __user *)(8 + (char __user *)src),
+			       ret, "q", "", "=r", 8);
+		return ret;
+	default:
+		return copy_user_generic(dst, (__force void *)src, size);
+	}
+}
+
+static __always_inline __must_check
+int __copy_to_user(void __user *dst, const void *src, unsigned size)
+{
+	int ret = 0;
+	if (!__builtin_constant_p(size))
+		return copy_user_generic((__force void *)dst, src, size);
+	switch (size) {
+	case 1:__put_user_asm(*(u8 *)src, (u8 __user *)dst,
+			      ret, "b", "b", "iq", 1);
+		return ret;
+	case 2:__put_user_asm(*(u16 *)src, (u16 __user *)dst,
+			      ret, "w", "w", "ir", 2);
+		return ret;
+	case 4:__put_user_asm(*(u32 *)src, (u32 __user *)dst,
+			      ret, "l", "k", "ir", 4);
+		return ret;
+	case 8:__put_user_asm(*(u64 *)src, (u64 __user *)dst,
+			      ret, "q", "", "ir", 8);
+		return ret;
+	case 10:
+		__put_user_asm(*(u64 *)src, (u64 __user *)dst,
+			       ret, "q", "", "ir", 10);
+		if (unlikely(ret))
+			return ret;
+		asm("":::"memory");
+		__put_user_asm(4[(u16 *)src], 4 + (u16 __user *)dst,
+			       ret, "w", "w", "ir", 2);
+		return ret;
+	case 16:
+		__put_user_asm(*(u64 *)src, (u64 __user *)dst,
+			       ret, "q", "", "ir", 16);
+		if (unlikely(ret))
+			return ret;
+		asm("":::"memory");
+		__put_user_asm(1[(u64 *)src], 1 + (u64 __user *)dst,
+			       ret, "q", "", "ir", 8);
+		return ret;
+	default:
+		return copy_user_generic((__force void *)dst, src, size);
+	}
+}
+
+static __always_inline __must_check
+int __copy_in_user(void __user *dst, const void __user *src, unsigned size)
+{
+	int ret = 0;
+	if (!__builtin_constant_p(size))
+		return copy_user_generic((__force void *)dst,
+					 (__force void *)src, size);
+	switch (size) {
+	case 1: {
+		u8 tmp;
+		__get_user_asm(tmp, (u8 __user *)src,
+			       ret, "b", "b", "=q", 1);
+		if (likely(!ret))
+			__put_user_asm(tmp, (u8 __user *)dst,
+				       ret, "b", "b", "iq", 1);
+		return ret;
+	}
+	case 2: {
+		u16 tmp;
+		__get_user_asm(tmp, (u16 __user *)src,
+			       ret, "w", "w", "=r", 2);
+		if (likely(!ret))
+			__put_user_asm(tmp, (u16 __user *)dst,
+				       ret, "w", "w", "ir", 2);
+		return ret;
+	}
+
+	case 4: {
+		u32 tmp;
+		__get_user_asm(tmp, (u32 __user *)src,
+			       ret, "l", "k", "=r", 4);
+		if (likely(!ret))
+			__put_user_asm(tmp, (u32 __user *)dst,
+				       ret, "l", "k", "ir", 4);
+		return ret;
+	}
+	case 8: {
+		u64 tmp;
+		__get_user_asm(tmp, (u64 __user *)src,
+			       ret, "q", "", "=r", 8);
+		if (likely(!ret))
+			__put_user_asm(tmp, (u64 __user *)dst,
+				       ret, "q", "", "ir", 8);
+		return ret;
+	}
+	default:
+		return copy_user_generic((__force void *)dst,
+					 (__force void *)src, size);
+	}
+}
+
+__must_check long
+strncpy_from_user(char *dst, const char __user *src, long count);
+__must_check long
+__strncpy_from_user(char *dst, const char __user *src, long count);
+__must_check long strnlen_user(const char __user *str, long n);
+__must_check long __strnlen_user(const char __user *str, long n);
+__must_check long strlen_user(const char __user *str);
+__must_check unsigned long clear_user(void __user *mem, unsigned long len);
+__must_check unsigned long __clear_user(void __user *mem, unsigned long len);
+
+__must_check long __copy_from_user_inatomic(void *dst, const void __user *src,
+					    unsigned size);
+
+static __must_check __always_inline int
+__copy_to_user_inatomic(void __user *dst, const void *src, unsigned size)
+{
+	return copy_user_generic((__force void *)dst, src, size);
+}
+
+extern long __copy_user_nocache(void *dst, const void __user *src,
+				unsigned size, int zerorest);
+
+static inline int __copy_from_user_nocache(void *dst, const void __user *src,
+					   unsigned size)
+{
+	might_sleep();
+	return __copy_user_nocache(dst, src, size, 1);
+}
+
+static inline int __copy_from_user_inatomic_nocache(void *dst,
+						    const void __user *src,
+						    unsigned size)
+{
+	return __copy_user_nocache(dst, src, size, 0);
+}
+
+unsigned long
+copy_user_handle_tail(char *to, char *from, unsigned len, unsigned zerorest);
+
+#endif /* _ASM_X86_UACCESS_64_H */
diff --git a/arch/x86/include/asm/ucontext.h b/arch/x86/include/asm/ucontext.h
new file mode 100644
index 0000000..87324cf
--- /dev/null
+++ b/arch/x86/include/asm/ucontext.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_X86_UCONTEXT_H
+#define _ASM_X86_UCONTEXT_H
+
+#define UC_FP_XSTATE	0x1	/* indicates the presence of extended state
+				 * information in the memory layout pointed
+				 * by the fpstate pointer in the ucontext's
+				 * sigcontext struct (uc_mcontext).
+				 */
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* _ASM_X86_UCONTEXT_H */
diff --git a/arch/x86/include/asm/unaligned.h b/arch/x86/include/asm/unaligned.h
new file mode 100644
index 0000000..a7bd416
--- /dev/null
+++ b/arch/x86/include/asm/unaligned.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_X86_UNALIGNED_H
+#define _ASM_X86_UNALIGNED_H
+
+/*
+ * The x86 can do unaligned accesses itself.
+ */
+
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned __get_unaligned_le
+#define put_unaligned __put_unaligned_le
+
+#endif /* _ASM_X86_UNALIGNED_H */
diff --git a/include/asm-x86/unistd.h b/arch/x86/include/asm/unistd.h
similarity index 100%
rename from include/asm-x86/unistd.h
rename to arch/x86/include/asm/unistd.h
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
new file mode 100644
index 0000000..f2bba78
--- /dev/null
+++ b/arch/x86/include/asm/unistd_32.h
@@ -0,0 +1,379 @@
+#ifndef _ASM_X86_UNISTD_32_H
+#define _ASM_X86_UNISTD_32_H
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76   /* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86old		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_vm86		166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+#define __NR_madvise1		219	/* delete when C lib stub is removed */
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+/* 223 is unused */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+#define __NR_set_thread_area	243
+#define __NR_get_thread_area	244
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_fadvise64		250
+/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_epoll_create	254
+#define __NR_epoll_ctl		255
+#define __NR_epoll_wait		256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+#define __NR_vserver		273
+#define __NR_mbind		274
+#define __NR_get_mempolicy	275
+#define __NR_set_mempolicy	276
+#define __NR_mq_open 		277
+#define __NR_mq_unlink		(__NR_mq_open+1)
+#define __NR_mq_timedsend	(__NR_mq_open+2)
+#define __NR_mq_timedreceive	(__NR_mq_open+3)
+#define __NR_mq_notify		(__NR_mq_open+4)
+#define __NR_mq_getsetattr	(__NR_mq_open+5)
+#define __NR_kexec_load		283
+#define __NR_waitid		284
+/* #define __NR_sys_setaltroot	285 */
+#define __NR_add_key		286
+#define __NR_request_key	287
+#define __NR_keyctl		288
+#define __NR_ioprio_set		289
+#define __NR_ioprio_get		290
+#define __NR_inotify_init	291
+#define __NR_inotify_add_watch	292
+#define __NR_inotify_rm_watch	293
+#define __NR_migrate_pages	294
+#define __NR_openat		295
+#define __NR_mkdirat		296
+#define __NR_mknodat		297
+#define __NR_fchownat		298
+#define __NR_futimesat		299
+#define __NR_fstatat64		300
+#define __NR_unlinkat		301
+#define __NR_renameat		302
+#define __NR_linkat		303
+#define __NR_symlinkat		304
+#define __NR_readlinkat		305
+#define __NR_fchmodat		306
+#define __NR_faccessat		307
+#define __NR_pselect6		308
+#define __NR_ppoll		309
+#define __NR_unshare		310
+#define __NR_set_robust_list	311
+#define __NR_get_robust_list	312
+#define __NR_splice		313
+#define __NR_sync_file_range	314
+#define __NR_tee		315
+#define __NR_vmsplice		316
+#define __NR_move_pages		317
+#define __NR_getcpu		318
+#define __NR_epoll_pwait	319
+#define __NR_utimensat		320
+#define __NR_signalfd		321
+#define __NR_timerfd_create	322
+#define __NR_eventfd		323
+#define __NR_fallocate		324
+#define __NR_timerfd_settime	325
+#define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
+
+#ifdef __KERNEL__
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_X86_UNISTD_32_H */
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
new file mode 100644
index 0000000..834b2c1
--- /dev/null
+++ b/arch/x86/include/asm/unistd_64.h
@@ -0,0 +1,693 @@
+#ifndef _ASM_X86_UNISTD_64_H
+#define _ASM_X86_UNISTD_64_H
+
+#ifndef __SYSCALL
+#define __SYSCALL(a, b)
+#endif
+
+/*
+ * This file contains the system call numbers.
+ *
+ * Note: holes are not allowed.
+ */
+
+/* at least 8 syscall per cacheline */
+#define __NR_read				0
+__SYSCALL(__NR_read, sys_read)
+#define __NR_write				1
+__SYSCALL(__NR_write, sys_write)
+#define __NR_open				2
+__SYSCALL(__NR_open, sys_open)
+#define __NR_close				3
+__SYSCALL(__NR_close, sys_close)
+#define __NR_stat				4
+__SYSCALL(__NR_stat, sys_newstat)
+#define __NR_fstat				5
+__SYSCALL(__NR_fstat, sys_newfstat)
+#define __NR_lstat				6
+__SYSCALL(__NR_lstat, sys_newlstat)
+#define __NR_poll				7
+__SYSCALL(__NR_poll, sys_poll)
+
+#define __NR_lseek				8
+__SYSCALL(__NR_lseek, sys_lseek)
+#define __NR_mmap				9
+__SYSCALL(__NR_mmap, sys_mmap)
+#define __NR_mprotect				10
+__SYSCALL(__NR_mprotect, sys_mprotect)
+#define __NR_munmap				11
+__SYSCALL(__NR_munmap, sys_munmap)
+#define __NR_brk				12
+__SYSCALL(__NR_brk, sys_brk)
+#define __NR_rt_sigaction			13
+__SYSCALL(__NR_rt_sigaction, sys_rt_sigaction)
+#define __NR_rt_sigprocmask			14
+__SYSCALL(__NR_rt_sigprocmask, sys_rt_sigprocmask)
+#define __NR_rt_sigreturn			15
+__SYSCALL(__NR_rt_sigreturn, stub_rt_sigreturn)
+
+#define __NR_ioctl				16
+__SYSCALL(__NR_ioctl, sys_ioctl)
+#define __NR_pread64				17
+__SYSCALL(__NR_pread64, sys_pread64)
+#define __NR_pwrite64				18
+__SYSCALL(__NR_pwrite64, sys_pwrite64)
+#define __NR_readv				19
+__SYSCALL(__NR_readv, sys_readv)
+#define __NR_writev				20
+__SYSCALL(__NR_writev, sys_writev)
+#define __NR_access				21
+__SYSCALL(__NR_access, sys_access)
+#define __NR_pipe				22
+__SYSCALL(__NR_pipe, sys_pipe)
+#define __NR_select				23
+__SYSCALL(__NR_select, sys_select)
+
+#define __NR_sched_yield			24
+__SYSCALL(__NR_sched_yield, sys_sched_yield)
+#define __NR_mremap				25
+__SYSCALL(__NR_mremap, sys_mremap)
+#define __NR_msync				26
+__SYSCALL(__NR_msync, sys_msync)
+#define __NR_mincore				27
+__SYSCALL(__NR_mincore, sys_mincore)
+#define __NR_madvise				28
+__SYSCALL(__NR_madvise, sys_madvise)
+#define __NR_shmget				29
+__SYSCALL(__NR_shmget, sys_shmget)
+#define __NR_shmat				30
+__SYSCALL(__NR_shmat, sys_shmat)
+#define __NR_shmctl				31
+__SYSCALL(__NR_shmctl, sys_shmctl)
+
+#define __NR_dup				32
+__SYSCALL(__NR_dup, sys_dup)
+#define __NR_dup2				33
+__SYSCALL(__NR_dup2, sys_dup2)
+#define __NR_pause				34
+__SYSCALL(__NR_pause, sys_pause)
+#define __NR_nanosleep				35
+__SYSCALL(__NR_nanosleep, sys_nanosleep)
+#define __NR_getitimer				36
+__SYSCALL(__NR_getitimer, sys_getitimer)
+#define __NR_alarm				37
+__SYSCALL(__NR_alarm, sys_alarm)
+#define __NR_setitimer				38
+__SYSCALL(__NR_setitimer, sys_setitimer)
+#define __NR_getpid				39
+__SYSCALL(__NR_getpid, sys_getpid)
+
+#define __NR_sendfile				40
+__SYSCALL(__NR_sendfile, sys_sendfile64)
+#define __NR_socket				41
+__SYSCALL(__NR_socket, sys_socket)
+#define __NR_connect				42
+__SYSCALL(__NR_connect, sys_connect)
+#define __NR_accept				43
+__SYSCALL(__NR_accept, sys_accept)
+#define __NR_sendto				44
+__SYSCALL(__NR_sendto, sys_sendto)
+#define __NR_recvfrom				45
+__SYSCALL(__NR_recvfrom, sys_recvfrom)
+#define __NR_sendmsg				46
+__SYSCALL(__NR_sendmsg, sys_sendmsg)
+#define __NR_recvmsg				47
+__SYSCALL(__NR_recvmsg, sys_recvmsg)
+
+#define __NR_shutdown				48
+__SYSCALL(__NR_shutdown, sys_shutdown)
+#define __NR_bind				49
+__SYSCALL(__NR_bind, sys_bind)
+#define __NR_listen				50
+__SYSCALL(__NR_listen, sys_listen)
+#define __NR_getsockname			51
+__SYSCALL(__NR_getsockname, sys_getsockname)
+#define __NR_getpeername			52
+__SYSCALL(__NR_getpeername, sys_getpeername)
+#define __NR_socketpair				53
+__SYSCALL(__NR_socketpair, sys_socketpair)
+#define __NR_setsockopt				54
+__SYSCALL(__NR_setsockopt, sys_setsockopt)
+#define __NR_getsockopt				55
+__SYSCALL(__NR_getsockopt, sys_getsockopt)
+
+#define __NR_clone				56
+__SYSCALL(__NR_clone, stub_clone)
+#define __NR_fork				57
+__SYSCALL(__NR_fork, stub_fork)
+#define __NR_vfork				58
+__SYSCALL(__NR_vfork, stub_vfork)
+#define __NR_execve				59
+__SYSCALL(__NR_execve, stub_execve)
+#define __NR_exit				60
+__SYSCALL(__NR_exit, sys_exit)
+#define __NR_wait4				61
+__SYSCALL(__NR_wait4, sys_wait4)
+#define __NR_kill				62
+__SYSCALL(__NR_kill, sys_kill)
+#define __NR_uname				63
+__SYSCALL(__NR_uname, sys_uname)
+
+#define __NR_semget				64
+__SYSCALL(__NR_semget, sys_semget)
+#define __NR_semop				65
+__SYSCALL(__NR_semop, sys_semop)
+#define __NR_semctl				66
+__SYSCALL(__NR_semctl, sys_semctl)
+#define __NR_shmdt				67
+__SYSCALL(__NR_shmdt, sys_shmdt)
+#define __NR_msgget				68
+__SYSCALL(__NR_msgget, sys_msgget)
+#define __NR_msgsnd				69
+__SYSCALL(__NR_msgsnd, sys_msgsnd)
+#define __NR_msgrcv				70
+__SYSCALL(__NR_msgrcv, sys_msgrcv)
+#define __NR_msgctl				71
+__SYSCALL(__NR_msgctl, sys_msgctl)
+
+#define __NR_fcntl				72
+__SYSCALL(__NR_fcntl, sys_fcntl)
+#define __NR_flock				73
+__SYSCALL(__NR_flock, sys_flock)
+#define __NR_fsync				74
+__SYSCALL(__NR_fsync, sys_fsync)
+#define __NR_fdatasync				75
+__SYSCALL(__NR_fdatasync, sys_fdatasync)
+#define __NR_truncate				76
+__SYSCALL(__NR_truncate, sys_truncate)
+#define __NR_ftruncate				77
+__SYSCALL(__NR_ftruncate, sys_ftruncate)
+#define __NR_getdents				78
+__SYSCALL(__NR_getdents, sys_getdents)
+#define __NR_getcwd				79
+__SYSCALL(__NR_getcwd, sys_getcwd)
+
+#define __NR_chdir				80
+__SYSCALL(__NR_chdir, sys_chdir)
+#define __NR_fchdir				81
+__SYSCALL(__NR_fchdir, sys_fchdir)
+#define __NR_rename				82
+__SYSCALL(__NR_rename, sys_rename)
+#define __NR_mkdir				83
+__SYSCALL(__NR_mkdir, sys_mkdir)
+#define __NR_rmdir				84
+__SYSCALL(__NR_rmdir, sys_rmdir)
+#define __NR_creat				85
+__SYSCALL(__NR_creat, sys_creat)
+#define __NR_link				86
+__SYSCALL(__NR_link, sys_link)
+#define __NR_unlink				87
+__SYSCALL(__NR_unlink, sys_unlink)
+
+#define __NR_symlink				88
+__SYSCALL(__NR_symlink, sys_symlink)
+#define __NR_readlink				89
+__SYSCALL(__NR_readlink, sys_readlink)
+#define __NR_chmod				90
+__SYSCALL(__NR_chmod, sys_chmod)
+#define __NR_fchmod				91
+__SYSCALL(__NR_fchmod, sys_fchmod)
+#define __NR_chown				92
+__SYSCALL(__NR_chown, sys_chown)
+#define __NR_fchown				93
+__SYSCALL(__NR_fchown, sys_fchown)
+#define __NR_lchown				94
+__SYSCALL(__NR_lchown, sys_lchown)
+#define __NR_umask				95
+__SYSCALL(__NR_umask, sys_umask)
+
+#define __NR_gettimeofday			96
+__SYSCALL(__NR_gettimeofday, sys_gettimeofday)
+#define __NR_getrlimit				97
+__SYSCALL(__NR_getrlimit, sys_getrlimit)
+#define __NR_getrusage				98
+__SYSCALL(__NR_getrusage, sys_getrusage)
+#define __NR_sysinfo				99
+__SYSCALL(__NR_sysinfo, sys_sysinfo)
+#define __NR_times				100
+__SYSCALL(__NR_times, sys_times)
+#define __NR_ptrace				101
+__SYSCALL(__NR_ptrace, sys_ptrace)
+#define __NR_getuid				102
+__SYSCALL(__NR_getuid, sys_getuid)
+#define __NR_syslog				103
+__SYSCALL(__NR_syslog, sys_syslog)
+
+/* at the very end the stuff that never runs during the benchmarks */
+#define __NR_getgid				104
+__SYSCALL(__NR_getgid, sys_getgid)
+#define __NR_setuid				105
+__SYSCALL(__NR_setuid, sys_setuid)
+#define __NR_setgid				106
+__SYSCALL(__NR_setgid, sys_setgid)
+#define __NR_geteuid				107
+__SYSCALL(__NR_geteuid, sys_geteuid)
+#define __NR_getegid				108
+__SYSCALL(__NR_getegid, sys_getegid)
+#define __NR_setpgid				109
+__SYSCALL(__NR_setpgid, sys_setpgid)
+#define __NR_getppid				110
+__SYSCALL(__NR_getppid, sys_getppid)
+#define __NR_getpgrp				111
+__SYSCALL(__NR_getpgrp, sys_getpgrp)
+
+#define __NR_setsid				112
+__SYSCALL(__NR_setsid, sys_setsid)
+#define __NR_setreuid				113
+__SYSCALL(__NR_setreuid, sys_setreuid)
+#define __NR_setregid				114
+__SYSCALL(__NR_setregid, sys_setregid)
+#define __NR_getgroups				115
+__SYSCALL(__NR_getgroups, sys_getgroups)
+#define __NR_setgroups				116
+__SYSCALL(__NR_setgroups, sys_setgroups)
+#define __NR_setresuid				117
+__SYSCALL(__NR_setresuid, sys_setresuid)
+#define __NR_getresuid				118
+__SYSCALL(__NR_getresuid, sys_getresuid)
+#define __NR_setresgid				119
+__SYSCALL(__NR_setresgid, sys_setresgid)
+
+#define __NR_getresgid				120
+__SYSCALL(__NR_getresgid, sys_getresgid)
+#define __NR_getpgid				121
+__SYSCALL(__NR_getpgid, sys_getpgid)
+#define __NR_setfsuid				122
+__SYSCALL(__NR_setfsuid, sys_setfsuid)
+#define __NR_setfsgid				123
+__SYSCALL(__NR_setfsgid, sys_setfsgid)
+#define __NR_getsid				124
+__SYSCALL(__NR_getsid, sys_getsid)
+#define __NR_capget				125
+__SYSCALL(__NR_capget, sys_capget)
+#define __NR_capset				126
+__SYSCALL(__NR_capset, sys_capset)
+
+#define __NR_rt_sigpending			127
+__SYSCALL(__NR_rt_sigpending, sys_rt_sigpending)
+#define __NR_rt_sigtimedwait			128
+__SYSCALL(__NR_rt_sigtimedwait, sys_rt_sigtimedwait)
+#define __NR_rt_sigqueueinfo			129
+__SYSCALL(__NR_rt_sigqueueinfo, sys_rt_sigqueueinfo)
+#define __NR_rt_sigsuspend			130
+__SYSCALL(__NR_rt_sigsuspend, sys_rt_sigsuspend)
+#define __NR_sigaltstack			131
+__SYSCALL(__NR_sigaltstack, stub_sigaltstack)
+#define __NR_utime				132
+__SYSCALL(__NR_utime, sys_utime)
+#define __NR_mknod				133
+__SYSCALL(__NR_mknod, sys_mknod)
+
+/* Only needed for a.out */
+#define __NR_uselib				134
+__SYSCALL(__NR_uselib, sys_ni_syscall)
+#define __NR_personality			135
+__SYSCALL(__NR_personality, sys_personality)
+
+#define __NR_ustat				136
+__SYSCALL(__NR_ustat, sys_ustat)
+#define __NR_statfs				137
+__SYSCALL(__NR_statfs, sys_statfs)
+#define __NR_fstatfs				138
+__SYSCALL(__NR_fstatfs, sys_fstatfs)
+#define __NR_sysfs				139
+__SYSCALL(__NR_sysfs, sys_sysfs)
+
+#define __NR_getpriority			140
+__SYSCALL(__NR_getpriority, sys_getpriority)
+#define __NR_setpriority			141
+__SYSCALL(__NR_setpriority, sys_setpriority)
+#define __NR_sched_setparam			142
+__SYSCALL(__NR_sched_setparam, sys_sched_setparam)
+#define __NR_sched_getparam			143
+__SYSCALL(__NR_sched_getparam, sys_sched_getparam)
+#define __NR_sched_setscheduler			144
+__SYSCALL(__NR_sched_setscheduler, sys_sched_setscheduler)
+#define __NR_sched_getscheduler			145
+__SYSCALL(__NR_sched_getscheduler, sys_sched_getscheduler)
+#define __NR_sched_get_priority_max		146
+__SYSCALL(__NR_sched_get_priority_max, sys_sched_get_priority_max)
+#define __NR_sched_get_priority_min		147
+__SYSCALL(__NR_sched_get_priority_min, sys_sched_get_priority_min)
+#define __NR_sched_rr_get_interval		148
+__SYSCALL(__NR_sched_rr_get_interval, sys_sched_rr_get_interval)
+
+#define __NR_mlock				149
+__SYSCALL(__NR_mlock, sys_mlock)
+#define __NR_munlock				150
+__SYSCALL(__NR_munlock, sys_munlock)
+#define __NR_mlockall				151
+__SYSCALL(__NR_mlockall, sys_mlockall)
+#define __NR_munlockall				152
+__SYSCALL(__NR_munlockall, sys_munlockall)
+
+#define __NR_vhangup				153
+__SYSCALL(__NR_vhangup, sys_vhangup)
+
+#define __NR_modify_ldt				154
+__SYSCALL(__NR_modify_ldt, sys_modify_ldt)
+
+#define __NR_pivot_root				155
+__SYSCALL(__NR_pivot_root, sys_pivot_root)
+
+#define __NR__sysctl				156
+__SYSCALL(__NR__sysctl, sys_sysctl)
+
+#define __NR_prctl				157
+__SYSCALL(__NR_prctl, sys_prctl)
+#define __NR_arch_prctl				158
+__SYSCALL(__NR_arch_prctl, sys_arch_prctl)
+
+#define __NR_adjtimex				159
+__SYSCALL(__NR_adjtimex, sys_adjtimex)
+
+#define __NR_setrlimit				160
+__SYSCALL(__NR_setrlimit, sys_setrlimit)
+
+#define __NR_chroot				161
+__SYSCALL(__NR_chroot, sys_chroot)
+
+#define __NR_sync				162
+__SYSCALL(__NR_sync, sys_sync)
+
+#define __NR_acct				163
+__SYSCALL(__NR_acct, sys_acct)
+
+#define __NR_settimeofday			164
+__SYSCALL(__NR_settimeofday, sys_settimeofday)
+
+#define __NR_mount				165
+__SYSCALL(__NR_mount, sys_mount)
+#define __NR_umount2				166
+__SYSCALL(__NR_umount2, sys_umount)
+
+#define __NR_swapon				167
+__SYSCALL(__NR_swapon, sys_swapon)
+#define __NR_swapoff				168
+__SYSCALL(__NR_swapoff, sys_swapoff)
+
+#define __NR_reboot				169
+__SYSCALL(__NR_reboot, sys_reboot)
+
+#define __NR_sethostname			170
+__SYSCALL(__NR_sethostname, sys_sethostname)
+#define __NR_setdomainname			171
+__SYSCALL(__NR_setdomainname, sys_setdomainname)
+
+#define __NR_iopl				172
+__SYSCALL(__NR_iopl, stub_iopl)
+#define __NR_ioperm				173
+__SYSCALL(__NR_ioperm, sys_ioperm)
+
+#define __NR_create_module			174
+__SYSCALL(__NR_create_module, sys_ni_syscall)
+#define __NR_init_module			175
+__SYSCALL(__NR_init_module, sys_init_module)
+#define __NR_delete_module			176
+__SYSCALL(__NR_delete_module, sys_delete_module)
+#define __NR_get_kernel_syms			177
+__SYSCALL(__NR_get_kernel_syms, sys_ni_syscall)
+#define __NR_query_module			178
+__SYSCALL(__NR_query_module, sys_ni_syscall)
+
+#define __NR_quotactl				179
+__SYSCALL(__NR_quotactl, sys_quotactl)
+
+#define __NR_nfsservctl				180
+__SYSCALL(__NR_nfsservctl, sys_nfsservctl)
+
+/* reserved for LiS/STREAMS */
+#define __NR_getpmsg				181
+__SYSCALL(__NR_getpmsg, sys_ni_syscall)
+#define __NR_putpmsg				182
+__SYSCALL(__NR_putpmsg, sys_ni_syscall)
+
+/* reserved for AFS */
+#define __NR_afs_syscall			183
+__SYSCALL(__NR_afs_syscall, sys_ni_syscall)
+
+/* reserved for tux */
+#define __NR_tuxcall				184
+__SYSCALL(__NR_tuxcall, sys_ni_syscall)
+
+#define __NR_security				185
+__SYSCALL(__NR_security, sys_ni_syscall)
+
+#define __NR_gettid				186
+__SYSCALL(__NR_gettid, sys_gettid)
+
+#define __NR_readahead				187
+__SYSCALL(__NR_readahead, sys_readahead)
+#define __NR_setxattr				188
+__SYSCALL(__NR_setxattr, sys_setxattr)
+#define __NR_lsetxattr				189
+__SYSCALL(__NR_lsetxattr, sys_lsetxattr)
+#define __NR_fsetxattr				190
+__SYSCALL(__NR_fsetxattr, sys_fsetxattr)
+#define __NR_getxattr				191
+__SYSCALL(__NR_getxattr, sys_getxattr)
+#define __NR_lgetxattr				192
+__SYSCALL(__NR_lgetxattr, sys_lgetxattr)
+#define __NR_fgetxattr				193
+__SYSCALL(__NR_fgetxattr, sys_fgetxattr)
+#define __NR_listxattr				194
+__SYSCALL(__NR_listxattr, sys_listxattr)
+#define __NR_llistxattr				195
+__SYSCALL(__NR_llistxattr, sys_llistxattr)
+#define __NR_flistxattr				196
+__SYSCALL(__NR_flistxattr, sys_flistxattr)
+#define __NR_removexattr			197
+__SYSCALL(__NR_removexattr, sys_removexattr)
+#define __NR_lremovexattr			198
+__SYSCALL(__NR_lremovexattr, sys_lremovexattr)
+#define __NR_fremovexattr			199
+__SYSCALL(__NR_fremovexattr, sys_fremovexattr)
+#define __NR_tkill				200
+__SYSCALL(__NR_tkill, sys_tkill)
+#define __NR_time				201
+__SYSCALL(__NR_time, sys_time)
+#define __NR_futex				202
+__SYSCALL(__NR_futex, sys_futex)
+#define __NR_sched_setaffinity			203
+__SYSCALL(__NR_sched_setaffinity, sys_sched_setaffinity)
+#define __NR_sched_getaffinity			204
+__SYSCALL(__NR_sched_getaffinity, sys_sched_getaffinity)
+#define __NR_set_thread_area			205
+__SYSCALL(__NR_set_thread_area, sys_ni_syscall)	/* use arch_prctl */
+#define __NR_io_setup				206
+__SYSCALL(__NR_io_setup, sys_io_setup)
+#define __NR_io_destroy				207
+__SYSCALL(__NR_io_destroy, sys_io_destroy)
+#define __NR_io_getevents			208
+__SYSCALL(__NR_io_getevents, sys_io_getevents)
+#define __NR_io_submit				209
+__SYSCALL(__NR_io_submit, sys_io_submit)
+#define __NR_io_cancel				210
+__SYSCALL(__NR_io_cancel, sys_io_cancel)
+#define __NR_get_thread_area			211
+__SYSCALL(__NR_get_thread_area, sys_ni_syscall)	/* use arch_prctl */
+#define __NR_lookup_dcookie			212
+__SYSCALL(__NR_lookup_dcookie, sys_lookup_dcookie)
+#define __NR_epoll_create			213
+__SYSCALL(__NR_epoll_create, sys_epoll_create)
+#define __NR_epoll_ctl_old			214
+__SYSCALL(__NR_epoll_ctl_old, sys_ni_syscall)
+#define __NR_epoll_wait_old			215
+__SYSCALL(__NR_epoll_wait_old, sys_ni_syscall)
+#define __NR_remap_file_pages			216
+__SYSCALL(__NR_remap_file_pages, sys_remap_file_pages)
+#define __NR_getdents64				217
+__SYSCALL(__NR_getdents64, sys_getdents64)
+#define __NR_set_tid_address			218
+__SYSCALL(__NR_set_tid_address, sys_set_tid_address)
+#define __NR_restart_syscall			219
+__SYSCALL(__NR_restart_syscall, sys_restart_syscall)
+#define __NR_semtimedop				220
+__SYSCALL(__NR_semtimedop, sys_semtimedop)
+#define __NR_fadvise64				221
+__SYSCALL(__NR_fadvise64, sys_fadvise64)
+#define __NR_timer_create			222
+__SYSCALL(__NR_timer_create, sys_timer_create)
+#define __NR_timer_settime			223
+__SYSCALL(__NR_timer_settime, sys_timer_settime)
+#define __NR_timer_gettime			224
+__SYSCALL(__NR_timer_gettime, sys_timer_gettime)
+#define __NR_timer_getoverrun			225
+__SYSCALL(__NR_timer_getoverrun, sys_timer_getoverrun)
+#define __NR_timer_delete			226
+__SYSCALL(__NR_timer_delete, sys_timer_delete)
+#define __NR_clock_settime			227
+__SYSCALL(__NR_clock_settime, sys_clock_settime)
+#define __NR_clock_gettime			228
+__SYSCALL(__NR_clock_gettime, sys_clock_gettime)
+#define __NR_clock_getres			229
+__SYSCALL(__NR_clock_getres, sys_clock_getres)
+#define __NR_clock_nanosleep			230
+__SYSCALL(__NR_clock_nanosleep, sys_clock_nanosleep)
+#define __NR_exit_group				231
+__SYSCALL(__NR_exit_group, sys_exit_group)
+#define __NR_epoll_wait				232
+__SYSCALL(__NR_epoll_wait, sys_epoll_wait)
+#define __NR_epoll_ctl				233
+__SYSCALL(__NR_epoll_ctl, sys_epoll_ctl)
+#define __NR_tgkill				234
+__SYSCALL(__NR_tgkill, sys_tgkill)
+#define __NR_utimes				235
+__SYSCALL(__NR_utimes, sys_utimes)
+#define __NR_vserver				236
+__SYSCALL(__NR_vserver, sys_ni_syscall)
+#define __NR_mbind				237
+__SYSCALL(__NR_mbind, sys_mbind)
+#define __NR_set_mempolicy			238
+__SYSCALL(__NR_set_mempolicy, sys_set_mempolicy)
+#define __NR_get_mempolicy			239
+__SYSCALL(__NR_get_mempolicy, sys_get_mempolicy)
+#define __NR_mq_open				240
+__SYSCALL(__NR_mq_open, sys_mq_open)
+#define __NR_mq_unlink				241
+__SYSCALL(__NR_mq_unlink, sys_mq_unlink)
+#define __NR_mq_timedsend			242
+__SYSCALL(__NR_mq_timedsend, sys_mq_timedsend)
+#define __NR_mq_timedreceive			243
+__SYSCALL(__NR_mq_timedreceive, sys_mq_timedreceive)
+#define __NR_mq_notify				244
+__SYSCALL(__NR_mq_notify, sys_mq_notify)
+#define __NR_mq_getsetattr			245
+__SYSCALL(__NR_mq_getsetattr, sys_mq_getsetattr)
+#define __NR_kexec_load				246
+__SYSCALL(__NR_kexec_load, sys_kexec_load)
+#define __NR_waitid				247
+__SYSCALL(__NR_waitid, sys_waitid)
+#define __NR_add_key				248
+__SYSCALL(__NR_add_key, sys_add_key)
+#define __NR_request_key			249
+__SYSCALL(__NR_request_key, sys_request_key)
+#define __NR_keyctl				250
+__SYSCALL(__NR_keyctl, sys_keyctl)
+#define __NR_ioprio_set				251
+__SYSCALL(__NR_ioprio_set, sys_ioprio_set)
+#define __NR_ioprio_get				252
+__SYSCALL(__NR_ioprio_get, sys_ioprio_get)
+#define __NR_inotify_init			253
+__SYSCALL(__NR_inotify_init, sys_inotify_init)
+#define __NR_inotify_add_watch			254
+__SYSCALL(__NR_inotify_add_watch, sys_inotify_add_watch)
+#define __NR_inotify_rm_watch			255
+__SYSCALL(__NR_inotify_rm_watch, sys_inotify_rm_watch)
+#define __NR_migrate_pages			256
+__SYSCALL(__NR_migrate_pages, sys_migrate_pages)
+#define __NR_openat				257
+__SYSCALL(__NR_openat, sys_openat)
+#define __NR_mkdirat				258
+__SYSCALL(__NR_mkdirat, sys_mkdirat)
+#define __NR_mknodat				259
+__SYSCALL(__NR_mknodat, sys_mknodat)
+#define __NR_fchownat				260
+__SYSCALL(__NR_fchownat, sys_fchownat)
+#define __NR_futimesat				261
+__SYSCALL(__NR_futimesat, sys_futimesat)
+#define __NR_newfstatat				262
+__SYSCALL(__NR_newfstatat, sys_newfstatat)
+#define __NR_unlinkat				263
+__SYSCALL(__NR_unlinkat, sys_unlinkat)
+#define __NR_renameat				264
+__SYSCALL(__NR_renameat, sys_renameat)
+#define __NR_linkat				265
+__SYSCALL(__NR_linkat, sys_linkat)
+#define __NR_symlinkat				266
+__SYSCALL(__NR_symlinkat, sys_symlinkat)
+#define __NR_readlinkat				267
+__SYSCALL(__NR_readlinkat, sys_readlinkat)
+#define __NR_fchmodat				268
+__SYSCALL(__NR_fchmodat, sys_fchmodat)
+#define __NR_faccessat				269
+__SYSCALL(__NR_faccessat, sys_faccessat)
+#define __NR_pselect6				270
+__SYSCALL(__NR_pselect6, sys_pselect6)
+#define __NR_ppoll				271
+__SYSCALL(__NR_ppoll,	sys_ppoll)
+#define __NR_unshare				272
+__SYSCALL(__NR_unshare,	sys_unshare)
+#define __NR_set_robust_list			273
+__SYSCALL(__NR_set_robust_list, sys_set_robust_list)
+#define __NR_get_robust_list			274
+__SYSCALL(__NR_get_robust_list, sys_get_robust_list)
+#define __NR_splice				275
+__SYSCALL(__NR_splice, sys_splice)
+#define __NR_tee				276
+__SYSCALL(__NR_tee, sys_tee)
+#define __NR_sync_file_range			277
+__SYSCALL(__NR_sync_file_range, sys_sync_file_range)
+#define __NR_vmsplice				278
+__SYSCALL(__NR_vmsplice, sys_vmsplice)
+#define __NR_move_pages				279
+__SYSCALL(__NR_move_pages, sys_move_pages)
+#define __NR_utimensat				280
+__SYSCALL(__NR_utimensat, sys_utimensat)
+#define __IGNORE_getcpu		/* implemented as a vsyscall */
+#define __NR_epoll_pwait			281
+__SYSCALL(__NR_epoll_pwait, sys_epoll_pwait)
+#define __NR_signalfd				282
+__SYSCALL(__NR_signalfd, sys_signalfd)
+#define __NR_timerfd_create			283
+__SYSCALL(__NR_timerfd_create, sys_timerfd_create)
+#define __NR_eventfd				284
+__SYSCALL(__NR_eventfd, sys_eventfd)
+#define __NR_fallocate				285
+__SYSCALL(__NR_fallocate, sys_fallocate)
+#define __NR_timerfd_settime			286
+__SYSCALL(__NR_timerfd_settime, sys_timerfd_settime)
+#define __NR_timerfd_gettime			287
+__SYSCALL(__NR_timerfd_gettime, sys_timerfd_gettime)
+#define __NR_paccept				288
+__SYSCALL(__NR_paccept, sys_paccept)
+#define __NR_signalfd4				289
+__SYSCALL(__NR_signalfd4, sys_signalfd4)
+#define __NR_eventfd2				290
+__SYSCALL(__NR_eventfd2, sys_eventfd2)
+#define __NR_epoll_create1			291
+__SYSCALL(__NR_epoll_create1, sys_epoll_create1)
+#define __NR_dup3				292
+__SYSCALL(__NR_dup3, sys_dup3)
+#define __NR_pipe2				293
+__SYSCALL(__NR_pipe2, sys_pipe2)
+#define __NR_inotify_init1			294
+__SYSCALL(__NR_inotify_init1, sys_inotify_init1)
+
+
+#ifndef __NO_STUBS
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_TIME
+#endif	/* __NO_STUBS */
+
+#ifdef __KERNEL__
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif	/* __KERNEL__ */
+
+#endif /* _ASM_X86_UNISTD_64_H */
diff --git a/arch/x86/include/asm/unwind.h b/arch/x86/include/asm/unwind.h
new file mode 100644
index 0000000..8b064bd
--- /dev/null
+++ b/arch/x86/include/asm/unwind.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_X86_UNWIND_H
+#define _ASM_X86_UNWIND_H
+
+#define UNW_PC(frame) ((void)(frame), 0UL)
+#define UNW_SP(frame) ((void)(frame), 0UL)
+#define UNW_FP(frame) ((void)(frame), 0UL)
+
+static inline int arch_unw_user_mode(const void *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_X86_UNWIND_H */
diff --git a/include/asm-x86/user.h b/arch/x86/include/asm/user.h
similarity index 100%
rename from include/asm-x86/user.h
rename to arch/x86/include/asm/user.h
diff --git a/arch/x86/include/asm/user32.h b/arch/x86/include/asm/user32.h
new file mode 100644
index 0000000..14cbb73
--- /dev/null
+++ b/arch/x86/include/asm/user32.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_X86_USER32_H
+#define _ASM_X86_USER32_H
+
+/* IA32 compatible user structures for ptrace.
+ * These should be used for 32bit coredumps too. */
+
+struct user_i387_ia32_struct {
+	u32	cwd;
+	u32	swd;
+	u32	twd;
+	u32	fip;
+	u32	fcs;
+	u32	foo;
+	u32	fos;
+	u32	st_space[20];   /* 8*10 bytes for each FP-reg = 80 bytes */
+};
+
+/* FSAVE frame with extensions */
+struct user32_fxsr_struct {
+	unsigned short	cwd;
+	unsigned short	swd;
+	unsigned short	twd;	/* not compatible to 64bit twd */
+	unsigned short	fop;
+	int	fip;
+	int	fcs;
+	int	foo;
+	int	fos;
+	int	mxcsr;
+	int	reserved;
+	int	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
+	int	xmm_space[32];	/* 8*16 bytes for each XMM-reg = 128 bytes */
+	int	padding[56];
+};
+
+struct user_regs_struct32 {
+	__u32 ebx, ecx, edx, esi, edi, ebp, eax;
+	unsigned short ds, __ds, es, __es;
+	unsigned short fs, __fs, gs, __gs;
+	__u32 orig_eax, eip;
+	unsigned short cs, __cs;
+	__u32 eflags, esp;
+	unsigned short ss, __ss;
+};
+
+struct user32 {
+  struct user_regs_struct32 regs; /* Where the registers are actually stored */
+  int u_fpvalid;		/* True if math co-processor being used. */
+				/* for this mess. Not yet used. */
+  struct user_i387_ia32_struct i387;	/* Math Co-processor registers. */
+/* The rest of this junk is to help gdb figure out what goes where */
+  __u32 u_tsize;	/* Text segment size (pages). */
+  __u32 u_dsize;	/* Data segment size (pages). */
+  __u32 u_ssize;	/* Stack segment size (pages). */
+  __u32 start_code;     /* Starting virtual address of text. */
+  __u32 start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  __u32 signal;     		/* Signal that caused the core dump. */
+  int reserved;			/* No __u32er used */
+  __u32 u_ar0;	/* Used by gdb to help find the values for */
+				/* the registers. */
+  __u32 u_fpstate;	/* Math Co-processor pointer. */
+  __u32 magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+  int u_debugreg[8];
+};
+
+
+#endif /* _ASM_X86_USER32_H */
diff --git a/arch/x86/include/asm/user_32.h b/arch/x86/include/asm/user_32.h
new file mode 100644
index 0000000..bebfd86
--- /dev/null
+++ b/arch/x86/include/asm/user_32.h
@@ -0,0 +1,131 @@
+#ifndef _ASM_X86_USER_32_H
+#define _ASM_X86_USER_32_H
+
+#include <asm/page.h>
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user (under
+   linux we use the 'trad-core' bfd).  There are quite a number of
+   obstacles to being able to view the contents of the floating point
+   registers, and until these are solved you will not be able to view the
+   contents of them.  Actually, you can read in the core file and look at
+   the contents of the user struct to find out what the floating point
+   registers contain.
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+/*
+ * Pentium III FXSR, SSE support
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ *
+ * Provide support for the GDB 5.0+ PTRACE_{GET|SET}FPXREGS requests for
+ * interacting with the FXSR-format floating point environment.  Floating
+ * point data can be accessed in the regular format in the usual manner,
+ * and both the standard and SIMD floating point data can be accessed via
+ * the new ptrace requests.  In either case, changes to the FPU environment
+ * will be reflected in the task's state as expected.
+ */
+
+struct user_i387_struct {
+	long	cwd;
+	long	swd;
+	long	twd;
+	long	fip;
+	long	fcs;
+	long	foo;
+	long	fos;
+	long	st_space[20];	/* 8*10 bytes for each FP-reg = 80 bytes */
+};
+
+struct user_fxsr_struct {
+	unsigned short	cwd;
+	unsigned short	swd;
+	unsigned short	twd;
+	unsigned short	fop;
+	long	fip;
+	long	fcs;
+	long	foo;
+	long	fos;
+	long	mxcsr;
+	long	reserved;
+	long	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
+	long	xmm_space[32];	/* 8*16 bytes for each XMM-reg = 128 bytes */
+	long	padding[56];
+};
+
+/*
+ * This is the old layout of "struct pt_regs", and
+ * is still the layout used by user mode (the new
+ * pt_regs doesn't have all registers as the kernel
+ * doesn't use the extra segment registers)
+ */
+struct user_regs_struct {
+	unsigned long	bx;
+	unsigned long	cx;
+	unsigned long	dx;
+	unsigned long	si;
+	unsigned long	di;
+	unsigned long	bp;
+	unsigned long	ax;
+	unsigned long	ds;
+	unsigned long	es;
+	unsigned long	fs;
+	unsigned long	gs;
+	unsigned long	orig_ax;
+	unsigned long	ip;
+	unsigned long	cs;
+	unsigned long	flags;
+	unsigned long	sp;
+	unsigned long	ss;
+};
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+struct user{
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct user_regs_struct regs;	/* Where the registers are actually stored */
+/* ptrace does not yet supply these.  Someday.... */
+  int u_fpvalid;		/* True if math co-processor being used. */
+				/* for this mess. Not yet used. */
+  struct user_i387_struct i387;	/* Math Co-processor registers. */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;	/* Text segment size (pages). */
+  unsigned long int u_dsize;	/* Data segment size (pages). */
+  unsigned long int u_ssize;	/* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  long int signal;     		/* Signal that caused the core dump. */
+  int reserved;			/* No longer used */
+  unsigned long u_ar0;		/* Used by gdb to help find the values for */
+				/* the registers. */
+  struct user_i387_struct *u_fpstate;	/* Math Co-processor pointer. */
+  unsigned long magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+  int u_debugreg[8];
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_X86_USER_32_H */
diff --git a/arch/x86/include/asm/user_64.h b/arch/x86/include/asm/user_64.h
new file mode 100644
index 0000000..faf2cd3
--- /dev/null
+++ b/arch/x86/include/asm/user_64.h
@@ -0,0 +1,137 @@
+#ifndef _ASM_X86_USER_64_H
+#define _ASM_X86_USER_64_H
+
+#include <asm/types.h>
+#include <asm/page.h>
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user.
+   There are quite a number of obstacles to being able to view the
+   contents of the floating point registers, and until these are
+   solved you will not be able to view the contents of them.
+   Actually, you can read in the core file and look at the contents of
+   the user struct to find out what the floating point registers
+   contain.
+
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.  */
+
+/*
+ * Pentium III FXSR, SSE support
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ *
+ * Provide support for the GDB 5.0+ PTRACE_{GET|SET}FPXREGS requests for
+ * interacting with the FXSR-format floating point environment.  Floating
+ * point data can be accessed in the regular format in the usual manner,
+ * and both the standard and SIMD floating point data can be accessed via
+ * the new ptrace requests.  In either case, changes to the FPU environment
+ * will be reflected in the task's state as expected.
+ *
+ * x86-64 support by Andi Kleen.
+ */
+
+/* This matches the 64bit FXSAVE format as defined by AMD. It is the same
+   as the 32bit format defined by Intel, except that the selector:offset pairs
+   for data and eip are replaced with flat 64bit pointers. */
+struct user_i387_struct {
+	unsigned short	cwd;
+	unsigned short	swd;
+	unsigned short	twd;	/* Note this is not the same as
+				   the 32bit/x87/FSAVE twd */
+	unsigned short	fop;
+	__u64	rip;
+	__u64	rdp;
+	__u32	mxcsr;
+	__u32	mxcsr_mask;
+	__u32	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
+	__u32	xmm_space[64];	/* 16*16 bytes for each XMM-reg = 256 bytes */
+	__u32	padding[24];
+};
+
+/*
+ * Segment register layout in coredumps.
+ */
+struct user_regs_struct {
+	unsigned long	r15;
+	unsigned long	r14;
+	unsigned long	r13;
+	unsigned long	r12;
+	unsigned long	bp;
+	unsigned long	bx;
+	unsigned long	r11;
+	unsigned long	r10;
+	unsigned long	r9;
+	unsigned long	r8;
+	unsigned long	ax;
+	unsigned long	cx;
+	unsigned long	dx;
+	unsigned long	si;
+	unsigned long	di;
+	unsigned long	orig_ax;
+	unsigned long	ip;
+	unsigned long	cs;
+	unsigned long	flags;
+	unsigned long	sp;
+	unsigned long	ss;
+	unsigned long	fs_base;
+	unsigned long	gs_base;
+	unsigned long	ds;
+	unsigned long	es;
+	unsigned long	fs;
+	unsigned long	gs;
+};
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+
+struct user {
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct user_regs_struct regs;	/* Where the registers are actually stored */
+/* ptrace does not yet supply these.  Someday.... */
+  int u_fpvalid;		/* True if math co-processor being used. */
+				/* for this mess. Not yet used. */
+  int pad0;
+  struct user_i387_struct i387;	/* Math Co-processor registers. */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;	/* Text segment size (pages). */
+  unsigned long int u_dsize;	/* Data segment size (pages). */
+  unsigned long int u_ssize;	/* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  long int signal;		/* Signal that caused the core dump. */
+  int reserved;			/* No longer used */
+  int pad1;
+  unsigned long u_ar0;		/* Used by gdb to help find the values for */
+				/* the registers. */
+  struct user_i387_struct *u_fpstate;	/* Math Co-processor pointer. */
+  unsigned long magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+  unsigned long u_debugreg[8];
+  unsigned long error_code; /* CPU error code or 0 */
+  unsigned long fault_address; /* CR3 or 0 */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_X86_USER_64_H */
diff --git a/arch/x86/include/asm/uv/bios.h b/arch/x86/include/asm/uv/bios.h
new file mode 100644
index 0000000..d931d3b
--- /dev/null
+++ b/arch/x86/include/asm/uv/bios.h
@@ -0,0 +1,94 @@
+#ifndef _ASM_X86_UV_BIOS_H
+#define _ASM_X86_UV_BIOS_H
+
+/*
+ * UV BIOS layer definitions.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *  Copyright (c) Russ Anderson
+ */
+
+#include <linux/rtc.h>
+
+/*
+ * Values for the BIOS calls.  It is passed as the first * argument in the
+ * BIOS call.  Passing any other value in the first argument will result
+ * in a BIOS_STATUS_UNIMPLEMENTED return status.
+ */
+enum uv_bios_cmd {
+	UV_BIOS_COMMON,
+	UV_BIOS_GET_SN_INFO,
+	UV_BIOS_FREQ_BASE
+};
+
+/*
+ * Status values returned from a BIOS call.
+ */
+enum {
+	BIOS_STATUS_SUCCESS		=  0,
+	BIOS_STATUS_UNIMPLEMENTED	= -ENOSYS,
+	BIOS_STATUS_EINVAL		= -EINVAL,
+	BIOS_STATUS_UNAVAIL		= -EBUSY
+};
+
+/*
+ * The UV system table describes specific firmware
+ * capabilities available to the Linux kernel at runtime.
+ */
+struct uv_systab {
+	char signature[4];	/* must be "UVST" */
+	u32 revision;		/* distinguish different firmware revs */
+	u64 function;		/* BIOS runtime callback function ptr */
+};
+
+enum {
+	BIOS_FREQ_BASE_PLATFORM = 0,
+	BIOS_FREQ_BASE_INTERVAL_TIMER = 1,
+	BIOS_FREQ_BASE_REALTIME_CLOCK = 2
+};
+
+union partition_info_u {
+	u64	val;
+	struct {
+		u64	hub_version	:  8,
+			partition_id	: 16,
+			coherence_id	: 16,
+			region_size	: 24;
+	};
+};
+
+/*
+ * bios calls have 6 parameters
+ */
+extern s64 uv_bios_call(enum uv_bios_cmd, u64, u64, u64, u64, u64);
+extern s64 uv_bios_call_irqsave(enum uv_bios_cmd, u64, u64, u64, u64, u64);
+extern s64 uv_bios_call_reentrant(enum uv_bios_cmd, u64, u64, u64, u64, u64);
+
+extern s64 uv_bios_get_sn_info(int, int *, long *, long *, long *);
+extern s64 uv_bios_freq_base(u64, u64 *);
+
+extern void uv_bios_init(void);
+
+extern int uv_type;
+extern long sn_partition_id;
+extern long uv_coherency_id;
+extern long uv_region_size;
+#define partition_coherence_id()	(uv_coherency_id)
+
+extern struct kobject *sgi_uv_kobj;	/* /sys/firmware/sgi_uv */
+
+#endif /* _ASM_X86_UV_BIOS_H */
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
new file mode 100644
index 0000000..e236325
--- /dev/null
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -0,0 +1,332 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV Broadcast Assist Unit definitions
+ *
+ * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_X86_UV_UV_BAU_H
+#define _ASM_X86_UV_UV_BAU_H
+
+#include <linux/bitmap.h>
+#define BITSPERBYTE 8
+
+/*
+ * Broadcast Assist Unit messaging structures
+ *
+ * Selective Broadcast activations are induced by software action
+ * specifying a particular 8-descriptor "set" via a 6-bit index written
+ * to an MMR.
+ * Thus there are 64 unique 512-byte sets of SB descriptors - one set for
+ * each 6-bit index value. These descriptor sets are mapped in sequence
+ * starting with set 0 located at the address specified in the
+ * BAU_SB_DESCRIPTOR_BASE register, set 1 is located at BASE + 512,
+ * set 2 is at BASE + 2*512, set 3 at BASE + 3*512, and so on.
+ *
+ * We will use 31 sets, one for sending BAU messages from each of the 32
+ * cpu's on the node.
+ *
+ * TLB shootdown will use the first of the 8 descriptors of each set.
+ * Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set).
+ */
+
+#define UV_ITEMS_PER_DESCRIPTOR		8
+#define UV_CPUS_PER_ACT_STATUS		32
+#define UV_ACT_STATUS_MASK		0x3
+#define UV_ACT_STATUS_SIZE		2
+#define UV_ACTIVATION_DESCRIPTOR_SIZE	32
+#define UV_DISTRIBUTION_SIZE		256
+#define UV_SW_ACK_NPENDING		8
+#define UV_NET_ENDPOINT_INTD		0x38
+#define UV_DESC_BASE_PNODE_SHIFT	49
+#define UV_PAYLOADQ_PNODE_SHIFT		49
+#define UV_PTC_BASENAME			"sgi_uv/ptc_statistics"
+#define uv_physnodeaddr(x)		((__pa((unsigned long)(x)) & uv_mmask))
+
+/*
+ * bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1
+ */
+#define DESC_STATUS_IDLE		0
+#define DESC_STATUS_ACTIVE		1
+#define DESC_STATUS_DESTINATION_TIMEOUT	2
+#define DESC_STATUS_SOURCE_TIMEOUT	3
+
+/*
+ * source side threshholds at which message retries print a warning
+ */
+#define SOURCE_TIMEOUT_LIMIT		20
+#define DESTINATION_TIMEOUT_LIMIT	20
+
+/*
+ * number of entries in the destination side payload queue
+ */
+#define DEST_Q_SIZE			17
+/*
+ * number of destination side software ack resources
+ */
+#define DEST_NUM_RESOURCES		8
+#define MAX_CPUS_PER_NODE		32
+/*
+ * completion statuses for sending a TLB flush message
+ */
+#define	FLUSH_RETRY			1
+#define	FLUSH_GIVEUP			2
+#define	FLUSH_COMPLETE			3
+
+/*
+ * Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor)
+ * If the 'multilevel' flag in the header portion of the descriptor
+ * has been set to 0, then endpoint multi-unicast mode is selected.
+ * The distribution specification (32 bytes) is interpreted as a 256-bit
+ * distribution vector. Adjacent bits correspond to consecutive even numbered
+ * nodeIDs. The result of adding the index of a given bit to the 15-bit
+ * 'base_dest_nodeid' field of the header corresponds to the
+ * destination nodeID associated with that specified bit.
+ */
+struct bau_target_nodemask {
+	unsigned long bits[BITS_TO_LONGS(256)];
+};
+
+/*
+ * mask of cpu's on a node
+ * (during initialization we need to check that unsigned long has
+ *  enough bits for max. cpu's per node)
+ */
+struct bau_local_cpumask {
+	unsigned long bits;
+};
+
+/*
+ * Payload: 16 bytes (128 bits) (bytes 0x20-0x2f of descriptor)
+ * only 12 bytes (96 bits) of the payload area are usable.
+ * An additional 3 bytes (bits 27:4) of the header address are carried
+ * to the next bytes of the destination payload queue.
+ * And an additional 2 bytes of the header Suppl_A field are also
+ * carried to the destination payload queue.
+ * But the first byte of the Suppl_A becomes bits 127:120 (the 16th byte)
+ * of the destination payload queue, which is written by the hardware
+ * with the s/w ack resource bit vector.
+ * [ effective message contents (16 bytes (128 bits) maximum), not counting
+ *   the s/w ack bit vector  ]
+ */
+
+/*
+ * The payload is software-defined for INTD transactions
+ */
+struct bau_msg_payload {
+	unsigned long address;		/* signifies a page or all TLB's
+						of the cpu */
+	/* 64 bits */
+	unsigned short sending_cpu;	/* filled in by sender */
+	/* 16 bits */
+	unsigned short acknowledge_count;/* filled in by destination */
+	/* 16 bits */
+	unsigned int reserved1:32;	/* not usable */
+};
+
+
+/*
+ * Message header:  16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
+ * see table 4.2.3.0.1 in broacast_assist spec.
+ */
+struct bau_msg_header {
+	int dest_subnodeid:6;	/* must be zero */
+	/* bits 5:0 */
+	int base_dest_nodeid:15; /* nasid>>1 (pnode) of first bit in node_map */
+	/* bits 20:6 */
+	int command:8;		/* message type */
+	/* bits 28:21 */
+				/* 0x38: SN3net EndPoint Message */
+	int rsvd_1:3;		/* must be zero */
+	/* bits 31:29 */
+				/* int will align on 32 bits */
+	int rsvd_2:9;		/* must be zero */
+	/* bits 40:32 */
+				/* Suppl_A is 56-41 */
+	int payload_2a:8;	/* becomes byte 16 of msg */
+	/* bits 48:41 */	/* not currently using */
+	int payload_2b:8;	/* becomes byte 17 of msg */
+	/* bits 56:49 */	/* not currently using */
+				/* Address field (96:57) is never used as an
+				   address (these are address bits 42:3) */
+	int rsvd_3:1;		/* must be zero */
+	/* bit 57 */
+				/* address bits 27:4 are payload */
+				/* these 24 bits become bytes 12-14 of msg */
+	int replied_to:1;	/* sent as 0 by the source to byte 12 */
+	/* bit 58 */
+
+	int payload_1a:5;	/* not currently used */
+	/* bits 63:59 */
+	int payload_1b:8;	/* not currently used */
+	/* bits 71:64 */
+	int payload_1c:8;	/* not currently used */
+	/* bits 79:72 */
+	int payload_1d:2;	/* not currently used */
+	/* bits 81:80 */
+
+	int rsvd_4:7;		/* must be zero */
+	/* bits 88:82 */
+	int sw_ack_flag:1;	/* software acknowledge flag */
+	/* bit 89 */
+				/* INTD trasactions at destination are to
+				   wait for software acknowledge */
+	int rsvd_5:6;		/* must be zero */
+	/* bits 95:90 */
+	int rsvd_6:5;		/* must be zero */
+	/* bits 100:96 */
+	int int_both:1;		/* if 1, interrupt both sockets on the blade */
+	/* bit 101*/
+	int fairness:3;		/* usually zero */
+	/* bits 104:102 */
+	int multilevel:1;	/* multi-level multicast format */
+	/* bit 105 */
+				/* 0 for TLB: endpoint multi-unicast messages */
+	int chaining:1;		/* next descriptor is part of this activation*/
+	/* bit 106 */
+	int rsvd_7:21;		/* must be zero */
+	/* bits 127:107 */
+};
+
+/*
+ * The activation descriptor:
+ * The format of the message to send, plus all accompanying control
+ * Should be 64 bytes
+ */
+struct bau_desc {
+	struct bau_target_nodemask distribution;
+	/*
+	 * message template, consisting of header and payload:
+	 */
+	struct bau_msg_header header;
+	struct bau_msg_payload payload;
+};
+/*
+ *   -payload--    ---------header------
+ *   bytes 0-11    bits 41-56  bits 58-81
+ *       A           B  (2)      C (3)
+ *
+ *            A/B/C are moved to:
+ *       A            C          B
+ *   bytes 0-11  bytes 12-14  bytes 16-17  (byte 15 filled in by hw as vector)
+ *   ------------payload queue-----------
+ */
+
+/*
+ * The payload queue on the destination side is an array of these.
+ * With BAU_MISC_CONTROL set for software acknowledge mode, the messages
+ * are 32 bytes (2 micropackets) (256 bits) in length, but contain only 17
+ * bytes of usable data, including the sw ack vector in byte 15 (bits 127:120)
+ * (12 bytes come from bau_msg_payload, 3 from payload_1, 2 from
+ *  sw_ack_vector and payload_2)
+ * "Enabling Software Acknowledgment mode (see Section 4.3.3 Software
+ *  Acknowledge Processing) also selects 32 byte (17 bytes usable) payload
+ *  operation."
+ */
+struct bau_payload_queue_entry {
+	unsigned long address;		/* signifies a page or all TLB's
+						of the cpu */
+	/* 64 bits, bytes 0-7 */
+
+	unsigned short sending_cpu;	/* cpu that sent the message */
+	/* 16 bits, bytes 8-9 */
+
+	unsigned short acknowledge_count; /* filled in by destination */
+	/* 16 bits, bytes 10-11 */
+
+	unsigned short replied_to:1;	/* sent as 0 by the source */
+	/* 1 bit */
+	unsigned short unused1:7;       /* not currently using */
+	/* 7 bits: byte 12) */
+
+	unsigned char unused2[2];	/* not currently using */
+	/* bytes 13-14 */
+
+	unsigned char sw_ack_vector;	/* filled in by the hardware */
+	/* byte 15 (bits 127:120) */
+
+	unsigned char unused4[3];	/* not currently using bytes 17-19 */
+	/* bytes 17-19 */
+
+	int number_of_cpus;		/* filled in at destination */
+	/* 32 bits, bytes 20-23 (aligned) */
+
+	unsigned char unused5[8];       /* not using */
+	/* bytes 24-31 */
+};
+
+/*
+ * one for every slot in the destination payload queue
+ */
+struct bau_msg_status {
+	struct bau_local_cpumask seen_by;	/* map of cpu's */
+};
+
+/*
+ * one for every slot in the destination software ack resources
+ */
+struct bau_sw_ack_status {
+	struct bau_payload_queue_entry *msg;	/* associated message */
+	int watcher;				/* cpu monitoring, or -1 */
+};
+
+/*
+ * one on every node and per-cpu; to locate the software tables
+ */
+struct bau_control {
+	struct bau_desc *descriptor_base;
+	struct bau_payload_queue_entry *bau_msg_head;
+	struct bau_payload_queue_entry *va_queue_first;
+	struct bau_payload_queue_entry *va_queue_last;
+	struct bau_msg_status *msg_statuses;
+	int *watching; /* pointer to array */
+};
+
+/*
+ * This structure is allocated per_cpu for UV TLB shootdown statistics.
+ */
+struct ptc_stats {
+	unsigned long ptc_i;	/* number of IPI-style flushes */
+	unsigned long requestor;	/* number of nodes this cpu sent to */
+	unsigned long requestee;	/* times cpu was remotely requested */
+	unsigned long alltlb;	/* times all tlb's on this cpu were flushed */
+	unsigned long onetlb;	/* times just one tlb on this cpu was flushed */
+	unsigned long s_retry;	/* retries on source side timeouts */
+	unsigned long d_retry;	/* retries on destination side timeouts */
+	unsigned long sflush;	/* cycles spent in uv_flush_tlb_others */
+	unsigned long dflush;	/* cycles spent on destination side */
+	unsigned long retriesok; /* successes on retries */
+	unsigned long nomsg;	/* interrupts with no message */
+	unsigned long multmsg;	/* interrupts with multiple messages */
+	unsigned long ntargeted;/* nodes targeted */
+};
+
+static inline int bau_node_isset(int node, struct bau_target_nodemask *dstp)
+{
+	return constant_test_bit(node, &dstp->bits[0]);
+}
+static inline void bau_node_set(int node, struct bau_target_nodemask *dstp)
+{
+	__set_bit(node, &dstp->bits[0]);
+}
+static inline void bau_nodes_clear(struct bau_target_nodemask *dstp, int nbits)
+{
+	bitmap_zero(&dstp->bits[0], nbits);
+}
+
+static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits)
+{
+	bitmap_zero(&dstp->bits, nbits);
+}
+
+#define cpubit_isset(cpu, bau_local_cpumask) \
+	test_bit((cpu), (bau_local_cpumask).bits)
+
+extern int uv_flush_tlb_others(cpumask_t *, struct mm_struct *, unsigned long);
+extern void uv_bau_message_intr1(void);
+extern void uv_bau_timeout_intr1(void);
+
+#endif /* _ASM_X86_UV_UV_BAU_H */
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
new file mode 100644
index 0000000..c6ad93e
--- /dev/null
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -0,0 +1,354 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV architectural definitions
+ *
+ * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_X86_UV_UV_HUB_H
+#define _ASM_X86_UV_UV_HUB_H
+
+#include <linux/numa.h>
+#include <linux/percpu.h>
+#include <asm/types.h>
+#include <asm/percpu.h>
+
+
+/*
+ * Addressing Terminology
+ *
+ *	M       - The low M bits of a physical address represent the offset
+ *		  into the blade local memory. RAM memory on a blade is physically
+ *		  contiguous (although various IO spaces may punch holes in
+ *		  it)..
+ *
+ * 	N	- Number of bits in the node portion of a socket physical
+ * 		  address.
+ *
+ * 	NASID   - network ID of a router, Mbrick or Cbrick. Nasid values of
+ * 	 	  routers always have low bit of 1, C/MBricks have low bit
+ * 		  equal to 0. Most addressing macros that target UV hub chips
+ * 		  right shift the NASID by 1 to exclude the always-zero bit.
+ * 		  NASIDs contain up to 15 bits.
+ *
+ *	GNODE   - NASID right shifted by 1 bit. Most mmrs contain gnodes instead
+ *		  of nasids.
+ *
+ * 	PNODE   - the low N bits of the GNODE. The PNODE is the most useful variant
+ * 		  of the nasid for socket usage.
+ *
+ *
+ *  NumaLink Global Physical Address Format:
+ *  +--------------------------------+---------------------+
+ *  |00..000|      GNODE             |      NodeOffset     |
+ *  +--------------------------------+---------------------+
+ *          |<-------53 - M bits --->|<--------M bits ----->
+ *
+ *	M - number of node offset bits (35 .. 40)
+ *
+ *
+ *  Memory/UV-HUB Processor Socket Address Format:
+ *  +----------------+---------------+---------------------+
+ *  |00..000000000000|   PNODE       |      NodeOffset     |
+ *  +----------------+---------------+---------------------+
+ *                   <--- N bits --->|<--------M bits ----->
+ *
+ *	M - number of node offset bits (35 .. 40)
+ *	N - number of PNODE bits (0 .. 10)
+ *
+ *		Note: M + N cannot currently exceed 44 (x86_64) or 46 (IA64).
+ *		The actual values are configuration dependent and are set at
+ *		boot time. M & N values are set by the hardware/BIOS at boot.
+ *
+ *
+ * APICID format
+ * 	NOTE!!!!!! This is the current format of the APICID. However, code
+ * 	should assume that this will change in the future. Use functions
+ * 	in this file for all APICID bit manipulations and conversion.
+ *
+ * 		1111110000000000
+ * 		5432109876543210
+ *		pppppppppplc0cch
+ *		sssssssssss
+ *
+ *			p  = pnode bits
+ *			l =  socket number on board
+ *			c  = core
+ *			h  = hyperthread
+ *			s  = bits that are in the SOCKET_ID CSR
+ *
+ *	Note: Processor only supports 12 bits in the APICID register. The ACPI
+ *	      tables hold all 16 bits. Software needs to be aware of this.
+ *
+ * 	      Unless otherwise specified, all references to APICID refer to
+ * 	      the FULL value contained in ACPI tables, not the subset in the
+ * 	      processor APICID register.
+ */
+
+
+/*
+ * Maximum number of bricks in all partitions and in all coherency domains.
+ * This is the total number of bricks accessible in the numalink fabric. It
+ * includes all C & M bricks. Routers are NOT included.
+ *
+ * This value is also the value of the maximum number of non-router NASIDs
+ * in the numalink fabric.
+ *
+ * NOTE: a brick may contain 1 or 2 OS nodes. Don't get these confused.
+ */
+#define UV_MAX_NUMALINK_BLADES	16384
+
+/*
+ * Maximum number of C/Mbricks within a software SSI (hardware may support
+ * more).
+ */
+#define UV_MAX_SSI_BLADES	256
+
+/*
+ * The largest possible NASID of a C or M brick (+ 2)
+ */
+#define UV_MAX_NASID_VALUE	(UV_MAX_NUMALINK_NODES * 2)
+
+/*
+ * The following defines attributes of the HUB chip. These attributes are
+ * frequently referenced and are kept in the per-cpu data areas of each cpu.
+ * They are kept together in a struct to minimize cache misses.
+ */
+struct uv_hub_info_s {
+	unsigned long	global_mmr_base;
+	unsigned long	gpa_mask;
+	unsigned long	gnode_upper;
+	unsigned long	lowmem_remap_top;
+	unsigned long	lowmem_remap_base;
+	unsigned short	pnode;
+	unsigned short	pnode_mask;
+	unsigned short	coherency_domain_number;
+	unsigned short	numa_blade_id;
+	unsigned char	blade_processor_id;
+	unsigned char	m_val;
+	unsigned char	n_val;
+};
+DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
+#define uv_hub_info 		(&__get_cpu_var(__uv_hub_info))
+#define uv_cpu_hub_info(cpu)	(&per_cpu(__uv_hub_info, cpu))
+
+/*
+ * Local & Global MMR space macros.
+ * 	Note: macros are intended to be used ONLY by inline functions
+ * 	in this file - not by other kernel code.
+ * 		n -  NASID (full 15-bit global nasid)
+ * 		g -  GNODE (full 15-bit global nasid, right shifted 1)
+ * 		p -  PNODE (local part of nsids, right shifted 1)
+ */
+#define UV_NASID_TO_PNODE(n)		(((n) >> 1) & uv_hub_info->pnode_mask)
+#define UV_PNODE_TO_NASID(p)		(((p) << 1) | uv_hub_info->gnode_upper)
+
+#define UV_LOCAL_MMR_BASE		0xf4000000UL
+#define UV_GLOBAL_MMR32_BASE		0xf8000000UL
+#define UV_GLOBAL_MMR64_BASE		(uv_hub_info->global_mmr_base)
+#define UV_LOCAL_MMR_SIZE		(64UL * 1024 * 1024)
+#define UV_GLOBAL_MMR32_SIZE		(64UL * 1024 * 1024)
+
+#define UV_GLOBAL_MMR32_PNODE_SHIFT	15
+#define UV_GLOBAL_MMR64_PNODE_SHIFT	26
+
+#define UV_GLOBAL_MMR32_PNODE_BITS(p)	((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT))
+
+#define UV_GLOBAL_MMR64_PNODE_BITS(p)					\
+	((unsigned long)(p) << UV_GLOBAL_MMR64_PNODE_SHIFT)
+
+#define UV_APIC_PNODE_SHIFT	6
+
+/*
+ * Macros for converting between kernel virtual addresses, socket local physical
+ * addresses, and UV global physical addresses.
+ * 	Note: use the standard __pa() & __va() macros for converting
+ * 	      between socket virtual and socket physical addresses.
+ */
+
+/* socket phys RAM --> UV global physical address */
+static inline unsigned long uv_soc_phys_ram_to_gpa(unsigned long paddr)
+{
+	if (paddr < uv_hub_info->lowmem_remap_top)
+		paddr += uv_hub_info->lowmem_remap_base;
+	return paddr | uv_hub_info->gnode_upper;
+}
+
+
+/* socket virtual --> UV global physical address */
+static inline unsigned long uv_gpa(void *v)
+{
+	return __pa(v) | uv_hub_info->gnode_upper;
+}
+
+/* socket virtual --> UV global physical address */
+static inline void *uv_vgpa(void *v)
+{
+	return (void *)uv_gpa(v);
+}
+
+/* UV global physical address --> socket virtual */
+static inline void *uv_va(unsigned long gpa)
+{
+	return __va(gpa & uv_hub_info->gpa_mask);
+}
+
+/* pnode, offset --> socket virtual */
+static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset)
+{
+	return __va(((unsigned long)pnode << uv_hub_info->m_val) | offset);
+}
+
+
+/*
+ * Extract a PNODE from an APICID (full apicid, not processor subset)
+ */
+static inline int uv_apicid_to_pnode(int apicid)
+{
+	return (apicid >> UV_APIC_PNODE_SHIFT);
+}
+
+/*
+ * Access global MMRs using the low memory MMR32 space. This region supports
+ * faster MMR access but not all MMRs are accessible in this space.
+ */
+static inline unsigned long *uv_global_mmr32_address(int pnode,
+				unsigned long offset)
+{
+	return __va(UV_GLOBAL_MMR32_BASE |
+		       UV_GLOBAL_MMR32_PNODE_BITS(pnode) | offset);
+}
+
+static inline void uv_write_global_mmr32(int pnode, unsigned long offset,
+				 unsigned long val)
+{
+	*uv_global_mmr32_address(pnode, offset) = val;
+}
+
+static inline unsigned long uv_read_global_mmr32(int pnode,
+						 unsigned long offset)
+{
+	return *uv_global_mmr32_address(pnode, offset);
+}
+
+/*
+ * Access Global MMR space using the MMR space located at the top of physical
+ * memory.
+ */
+static inline unsigned long *uv_global_mmr64_address(int pnode,
+				unsigned long offset)
+{
+	return __va(UV_GLOBAL_MMR64_BASE |
+		    UV_GLOBAL_MMR64_PNODE_BITS(pnode) | offset);
+}
+
+static inline void uv_write_global_mmr64(int pnode, unsigned long offset,
+				unsigned long val)
+{
+	*uv_global_mmr64_address(pnode, offset) = val;
+}
+
+static inline unsigned long uv_read_global_mmr64(int pnode,
+						 unsigned long offset)
+{
+	return *uv_global_mmr64_address(pnode, offset);
+}
+
+/*
+ * Access hub local MMRs. Faster than using global space but only local MMRs
+ * are accessible.
+ */
+static inline unsigned long *uv_local_mmr_address(unsigned long offset)
+{
+	return __va(UV_LOCAL_MMR_BASE | offset);
+}
+
+static inline unsigned long uv_read_local_mmr(unsigned long offset)
+{
+	return *uv_local_mmr_address(offset);
+}
+
+static inline void uv_write_local_mmr(unsigned long offset, unsigned long val)
+{
+	*uv_local_mmr_address(offset) = val;
+}
+
+/*
+ * Structures and definitions for converting between cpu, node, pnode, and blade
+ * numbers.
+ */
+struct uv_blade_info {
+	unsigned short	nr_possible_cpus;
+	unsigned short	nr_online_cpus;
+	unsigned short	pnode;
+};
+extern struct uv_blade_info *uv_blade_info;
+extern short *uv_node_to_blade;
+extern short *uv_cpu_to_blade;
+extern short uv_possible_blades;
+
+/* Blade-local cpu number of current cpu. Numbered 0 .. <# cpus on the blade> */
+static inline int uv_blade_processor_id(void)
+{
+	return uv_hub_info->blade_processor_id;
+}
+
+/* Blade number of current cpu. Numnbered 0 .. <#blades -1> */
+static inline int uv_numa_blade_id(void)
+{
+	return uv_hub_info->numa_blade_id;
+}
+
+/* Convert a cpu number to the the UV blade number */
+static inline int uv_cpu_to_blade_id(int cpu)
+{
+	return uv_cpu_to_blade[cpu];
+}
+
+/* Convert linux node number to the UV blade number */
+static inline int uv_node_to_blade_id(int nid)
+{
+	return uv_node_to_blade[nid];
+}
+
+/* Convert a blade id to the PNODE of the blade */
+static inline int uv_blade_to_pnode(int bid)
+{
+	return uv_blade_info[bid].pnode;
+}
+
+/* Determine the number of possible cpus on a blade */
+static inline int uv_blade_nr_possible_cpus(int bid)
+{
+	return uv_blade_info[bid].nr_possible_cpus;
+}
+
+/* Determine the number of online cpus on a blade */
+static inline int uv_blade_nr_online_cpus(int bid)
+{
+	return uv_blade_info[bid].nr_online_cpus;
+}
+
+/* Convert a cpu id to the PNODE of the blade containing the cpu */
+static inline int uv_cpu_to_pnode(int cpu)
+{
+	return uv_blade_info[uv_cpu_to_blade_id(cpu)].pnode;
+}
+
+/* Convert a linux node number to the PNODE of the blade */
+static inline int uv_node_to_pnode(int nid)
+{
+	return uv_blade_info[uv_node_to_blade_id(nid)].pnode;
+}
+
+/* Maximum possible number of blades */
+static inline int uv_num_possible_blades(void)
+{
+	return uv_possible_blades;
+}
+
+#endif /* _ASM_X86_UV_UV_HUB_H */
+
diff --git a/arch/x86/include/asm/uv/uv_irq.h b/arch/x86/include/asm/uv/uv_irq.h
new file mode 100644
index 0000000..9613c8c
--- /dev/null
+++ b/arch/x86/include/asm/uv/uv_irq.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV IRQ definitions
+ *
+ * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_X86_UV_UV_IRQ_H
+#define _ASM_X86_UV_UV_IRQ_H
+
+/* If a generic version of this structure gets defined, eliminate this one. */
+struct uv_IO_APIC_route_entry {
+	__u64	vector		:  8,
+		delivery_mode	:  3,
+		dest_mode	:  1,
+		delivery_status	:  1,
+		polarity	:  1,
+		__reserved_1	:  1,
+		trigger		:  1,
+		mask		:  1,
+		__reserved_2	: 15,
+		dest		: 32;
+};
+
+extern struct irq_chip uv_irq_chip;
+
+extern int arch_enable_uv_irq(char *, unsigned int, int, int, unsigned long);
+extern void arch_disable_uv_irq(int, unsigned long);
+
+extern int uv_setup_irq(char *, int, int, unsigned long);
+extern void uv_teardown_irq(unsigned int, int, unsigned long);
+
+#endif /* _ASM_X86_UV_UV_IRQ_H */
diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
new file mode 100644
index 0000000..dd62779
--- /dev/null
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -0,0 +1,1295 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV MMR definitions
+ *
+ * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_X86_UV_UV_MMRS_H
+#define _ASM_X86_UV_UV_MMRS_H
+
+#define UV_MMR_ENABLE		(1UL << 63)
+
+/* ========================================================================= */
+/*                           UVH_BAU_DATA_CONFIG                             */
+/* ========================================================================= */
+#define UVH_BAU_DATA_CONFIG 0x61680UL
+#define UVH_BAU_DATA_CONFIG_32 0x0438
+
+#define UVH_BAU_DATA_CONFIG_VECTOR_SHFT 0
+#define UVH_BAU_DATA_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_BAU_DATA_CONFIG_DM_SHFT 8
+#define UVH_BAU_DATA_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_BAU_DATA_CONFIG_DESTMODE_SHFT 11
+#define UVH_BAU_DATA_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_BAU_DATA_CONFIG_STATUS_SHFT 12
+#define UVH_BAU_DATA_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_BAU_DATA_CONFIG_P_SHFT 13
+#define UVH_BAU_DATA_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_BAU_DATA_CONFIG_T_SHFT 15
+#define UVH_BAU_DATA_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_BAU_DATA_CONFIG_M_SHFT 16
+#define UVH_BAU_DATA_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_BAU_DATA_CONFIG_APIC_ID_SHFT 32
+#define UVH_BAU_DATA_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_bau_data_config_u {
+    unsigned long	v;
+    struct uvh_bau_data_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                           UVH_EVENT_OCCURRED0                             */
+/* ========================================================================= */
+#define UVH_EVENT_OCCURRED0 0x70000UL
+#define UVH_EVENT_OCCURRED0_32 0x005e8
+
+#define UVH_EVENT_OCCURRED0_LB_HCERR_SHFT 0
+#define UVH_EVENT_OCCURRED0_LB_HCERR_MASK 0x0000000000000001UL
+#define UVH_EVENT_OCCURRED0_GR0_HCERR_SHFT 1
+#define UVH_EVENT_OCCURRED0_GR0_HCERR_MASK 0x0000000000000002UL
+#define UVH_EVENT_OCCURRED0_GR1_HCERR_SHFT 2
+#define UVH_EVENT_OCCURRED0_GR1_HCERR_MASK 0x0000000000000004UL
+#define UVH_EVENT_OCCURRED0_LH_HCERR_SHFT 3
+#define UVH_EVENT_OCCURRED0_LH_HCERR_MASK 0x0000000000000008UL
+#define UVH_EVENT_OCCURRED0_RH_HCERR_SHFT 4
+#define UVH_EVENT_OCCURRED0_RH_HCERR_MASK 0x0000000000000010UL
+#define UVH_EVENT_OCCURRED0_XN_HCERR_SHFT 5
+#define UVH_EVENT_OCCURRED0_XN_HCERR_MASK 0x0000000000000020UL
+#define UVH_EVENT_OCCURRED0_SI_HCERR_SHFT 6
+#define UVH_EVENT_OCCURRED0_SI_HCERR_MASK 0x0000000000000040UL
+#define UVH_EVENT_OCCURRED0_LB_AOERR0_SHFT 7
+#define UVH_EVENT_OCCURRED0_LB_AOERR0_MASK 0x0000000000000080UL
+#define UVH_EVENT_OCCURRED0_GR0_AOERR0_SHFT 8
+#define UVH_EVENT_OCCURRED0_GR0_AOERR0_MASK 0x0000000000000100UL
+#define UVH_EVENT_OCCURRED0_GR1_AOERR0_SHFT 9
+#define UVH_EVENT_OCCURRED0_GR1_AOERR0_MASK 0x0000000000000200UL
+#define UVH_EVENT_OCCURRED0_LH_AOERR0_SHFT 10
+#define UVH_EVENT_OCCURRED0_LH_AOERR0_MASK 0x0000000000000400UL
+#define UVH_EVENT_OCCURRED0_RH_AOERR0_SHFT 11
+#define UVH_EVENT_OCCURRED0_RH_AOERR0_MASK 0x0000000000000800UL
+#define UVH_EVENT_OCCURRED0_XN_AOERR0_SHFT 12
+#define UVH_EVENT_OCCURRED0_XN_AOERR0_MASK 0x0000000000001000UL
+#define UVH_EVENT_OCCURRED0_SI_AOERR0_SHFT 13
+#define UVH_EVENT_OCCURRED0_SI_AOERR0_MASK 0x0000000000002000UL
+#define UVH_EVENT_OCCURRED0_LB_AOERR1_SHFT 14
+#define UVH_EVENT_OCCURRED0_LB_AOERR1_MASK 0x0000000000004000UL
+#define UVH_EVENT_OCCURRED0_GR0_AOERR1_SHFT 15
+#define UVH_EVENT_OCCURRED0_GR0_AOERR1_MASK 0x0000000000008000UL
+#define UVH_EVENT_OCCURRED0_GR1_AOERR1_SHFT 16
+#define UVH_EVENT_OCCURRED0_GR1_AOERR1_MASK 0x0000000000010000UL
+#define UVH_EVENT_OCCURRED0_LH_AOERR1_SHFT 17
+#define UVH_EVENT_OCCURRED0_LH_AOERR1_MASK 0x0000000000020000UL
+#define UVH_EVENT_OCCURRED0_RH_AOERR1_SHFT 18
+#define UVH_EVENT_OCCURRED0_RH_AOERR1_MASK 0x0000000000040000UL
+#define UVH_EVENT_OCCURRED0_XN_AOERR1_SHFT 19
+#define UVH_EVENT_OCCURRED0_XN_AOERR1_MASK 0x0000000000080000UL
+#define UVH_EVENT_OCCURRED0_SI_AOERR1_SHFT 20
+#define UVH_EVENT_OCCURRED0_SI_AOERR1_MASK 0x0000000000100000UL
+#define UVH_EVENT_OCCURRED0_RH_VPI_INT_SHFT 21
+#define UVH_EVENT_OCCURRED0_RH_VPI_INT_MASK 0x0000000000200000UL
+#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_SHFT 22
+#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_SHFT 23
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_MASK 0x0000000000800000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_SHFT 24
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_MASK 0x0000000001000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_SHFT 25
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_MASK 0x0000000002000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_SHFT 26
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_MASK 0x0000000004000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_SHFT 27
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_MASK 0x0000000008000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_SHFT 28
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_MASK 0x0000000010000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_SHFT 29
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_MASK 0x0000000020000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_SHFT 30
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_MASK 0x0000000040000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_SHFT 31
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_MASK 0x0000000080000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_SHFT 32
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_MASK 0x0000000100000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_SHFT 33
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_MASK 0x0000000200000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_SHFT 34
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_MASK 0x0000000400000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_SHFT 35
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_MASK 0x0000000800000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_SHFT 36
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_MASK 0x0000001000000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_SHFT 37
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_MASK 0x0000002000000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_SHFT 38
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_MASK 0x0000004000000000UL
+#define UVH_EVENT_OCCURRED0_L1_NMI_INT_SHFT 39
+#define UVH_EVENT_OCCURRED0_L1_NMI_INT_MASK 0x0000008000000000UL
+#define UVH_EVENT_OCCURRED0_STOP_CLOCK_SHFT 40
+#define UVH_EVENT_OCCURRED0_STOP_CLOCK_MASK 0x0000010000000000UL
+#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_SHFT 41
+#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_MASK 0x0000020000000000UL
+#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_SHFT 42
+#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_MASK 0x0000040000000000UL
+#define UVH_EVENT_OCCURRED0_LTC_INT_SHFT 43
+#define UVH_EVENT_OCCURRED0_LTC_INT_MASK 0x0000080000000000UL
+#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_SHFT 44
+#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL
+#define UVH_EVENT_OCCURRED0_IPI_INT_SHFT 45
+#define UVH_EVENT_OCCURRED0_IPI_INT_MASK 0x0000200000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT0_SHFT 46
+#define UVH_EVENT_OCCURRED0_EXTIO_INT0_MASK 0x0000400000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT1_SHFT 47
+#define UVH_EVENT_OCCURRED0_EXTIO_INT1_MASK 0x0000800000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT2_SHFT 48
+#define UVH_EVENT_OCCURRED0_EXTIO_INT2_MASK 0x0001000000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT3_SHFT 49
+#define UVH_EVENT_OCCURRED0_EXTIO_INT3_MASK 0x0002000000000000UL
+#define UVH_EVENT_OCCURRED0_PROFILE_INT_SHFT 50
+#define UVH_EVENT_OCCURRED0_PROFILE_INT_MASK 0x0004000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC0_SHFT 51
+#define UVH_EVENT_OCCURRED0_RTC0_MASK 0x0008000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC1_SHFT 52
+#define UVH_EVENT_OCCURRED0_RTC1_MASK 0x0010000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC2_SHFT 53
+#define UVH_EVENT_OCCURRED0_RTC2_MASK 0x0020000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC3_SHFT 54
+#define UVH_EVENT_OCCURRED0_RTC3_MASK 0x0040000000000000UL
+#define UVH_EVENT_OCCURRED0_BAU_DATA_SHFT 55
+#define UVH_EVENT_OCCURRED0_BAU_DATA_MASK 0x0080000000000000UL
+#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_SHFT 56
+#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_MASK 0x0100000000000000UL
+union uvh_event_occurred0_u {
+    unsigned long	v;
+    struct uvh_event_occurred0_s {
+	unsigned long	lb_hcerr             :  1;  /* RW, W1C */
+	unsigned long	gr0_hcerr            :  1;  /* RW, W1C */
+	unsigned long	gr1_hcerr            :  1;  /* RW, W1C */
+	unsigned long	lh_hcerr             :  1;  /* RW, W1C */
+	unsigned long	rh_hcerr             :  1;  /* RW, W1C */
+	unsigned long	xn_hcerr             :  1;  /* RW, W1C */
+	unsigned long	si_hcerr             :  1;  /* RW, W1C */
+	unsigned long	lb_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	gr0_aoerr0           :  1;  /* RW, W1C */
+	unsigned long	gr1_aoerr0           :  1;  /* RW, W1C */
+	unsigned long	lh_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	rh_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	xn_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	si_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	lb_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	gr0_aoerr1           :  1;  /* RW, W1C */
+	unsigned long	gr1_aoerr1           :  1;  /* RW, W1C */
+	unsigned long	lh_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	rh_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	xn_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	si_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	rh_vpi_int           :  1;  /* RW, W1C */
+	unsigned long	system_shutdown_int  :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_0         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_1         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_2         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_3         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_4         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_5         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_6         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_7         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_8         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_9         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_10        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_11        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_12        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_13        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_14        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_15        :  1;  /* RW, W1C */
+	unsigned long	l1_nmi_int           :  1;  /* RW, W1C */
+	unsigned long	stop_clock           :  1;  /* RW, W1C */
+	unsigned long	asic_to_l1           :  1;  /* RW, W1C */
+	unsigned long	l1_to_asic           :  1;  /* RW, W1C */
+	unsigned long	ltc_int              :  1;  /* RW, W1C */
+	unsigned long	la_seq_trigger       :  1;  /* RW, W1C */
+	unsigned long	ipi_int              :  1;  /* RW, W1C */
+	unsigned long	extio_int0           :  1;  /* RW, W1C */
+	unsigned long	extio_int1           :  1;  /* RW, W1C */
+	unsigned long	extio_int2           :  1;  /* RW, W1C */
+	unsigned long	extio_int3           :  1;  /* RW, W1C */
+	unsigned long	profile_int          :  1;  /* RW, W1C */
+	unsigned long	rtc0                 :  1;  /* RW, W1C */
+	unsigned long	rtc1                 :  1;  /* RW, W1C */
+	unsigned long	rtc2                 :  1;  /* RW, W1C */
+	unsigned long	rtc3                 :  1;  /* RW, W1C */
+	unsigned long	bau_data             :  1;  /* RW, W1C */
+	unsigned long	power_management_req :  1;  /* RW, W1C */
+	unsigned long	rsvd_57_63           :  7;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                        UVH_EVENT_OCCURRED0_ALIAS                          */
+/* ========================================================================= */
+#define UVH_EVENT_OCCURRED0_ALIAS 0x0000000000070008UL
+#define UVH_EVENT_OCCURRED0_ALIAS_32 0x005f0
+
+/* ========================================================================= */
+/*                               UVH_INT_CMPB                                */
+/* ========================================================================= */
+#define UVH_INT_CMPB 0x22080UL
+
+#define UVH_INT_CMPB_REAL_TIME_CMPB_SHFT 0
+#define UVH_INT_CMPB_REAL_TIME_CMPB_MASK 0x00ffffffffffffffUL
+
+union uvh_int_cmpb_u {
+    unsigned long	v;
+    struct uvh_int_cmpb_s {
+	unsigned long	real_time_cmpb : 56;  /* RW */
+	unsigned long	rsvd_56_63     :  8;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                               UVH_INT_CMPC                                */
+/* ========================================================================= */
+#define UVH_INT_CMPC 0x22100UL
+
+#define UVH_INT_CMPC_REAL_TIME_CMPC_SHFT 0
+#define UVH_INT_CMPC_REAL_TIME_CMPC_MASK 0x00ffffffffffffffUL
+
+union uvh_int_cmpc_u {
+    unsigned long	v;
+    struct uvh_int_cmpc_s {
+	unsigned long	real_time_cmpc : 56;  /* RW */
+	unsigned long	rsvd_56_63     :  8;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                               UVH_INT_CMPD                                */
+/* ========================================================================= */
+#define UVH_INT_CMPD 0x22180UL
+
+#define UVH_INT_CMPD_REAL_TIME_CMPD_SHFT 0
+#define UVH_INT_CMPD_REAL_TIME_CMPD_MASK 0x00ffffffffffffffUL
+
+union uvh_int_cmpd_u {
+    unsigned long	v;
+    struct uvh_int_cmpd_s {
+	unsigned long	real_time_cmpd : 56;  /* RW */
+	unsigned long	rsvd_56_63     :  8;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                               UVH_IPI_INT                                 */
+/* ========================================================================= */
+#define UVH_IPI_INT 0x60500UL
+#define UVH_IPI_INT_32 0x0348
+
+#define UVH_IPI_INT_VECTOR_SHFT 0
+#define UVH_IPI_INT_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_IPI_INT_DELIVERY_MODE_SHFT 8
+#define UVH_IPI_INT_DELIVERY_MODE_MASK 0x0000000000000700UL
+#define UVH_IPI_INT_DESTMODE_SHFT 11
+#define UVH_IPI_INT_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_IPI_INT_APIC_ID_SHFT 16
+#define UVH_IPI_INT_APIC_ID_MASK 0x0000ffffffff0000UL
+#define UVH_IPI_INT_SEND_SHFT 63
+#define UVH_IPI_INT_SEND_MASK 0x8000000000000000UL
+
+union uvh_ipi_int_u {
+    unsigned long	v;
+    struct uvh_ipi_int_s {
+	unsigned long	vector_       :  8;  /* RW */
+	unsigned long	delivery_mode :  3;  /* RW */
+	unsigned long	destmode      :  1;  /* RW */
+	unsigned long	rsvd_12_15    :  4;  /*    */
+	unsigned long	apic_id       : 32;  /* RW */
+	unsigned long	rsvd_48_62    : 15;  /*    */
+	unsigned long	send          :  1;  /* WP */
+    } s;
+};
+
+/* ========================================================================= */
+/*                   UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST                     */
+/* ========================================================================= */
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST 0x320050UL
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_32 0x009c0
+
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_SHFT 4
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_MASK 0x000007fffffffff0UL
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_NODE_ID_SHFT 49
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_NODE_ID_MASK 0x7ffe000000000000UL
+
+union uvh_lb_bau_intd_payload_queue_first_u {
+    unsigned long	v;
+    struct uvh_lb_bau_intd_payload_queue_first_s {
+	unsigned long	rsvd_0_3:  4;  /*    */
+	unsigned long	address : 39;  /* RW */
+	unsigned long	rsvd_43_48:  6;  /*    */
+	unsigned long	node_id : 14;  /* RW */
+	unsigned long	rsvd_63 :  1;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST                     */
+/* ========================================================================= */
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST 0x320060UL
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_32 0x009c8
+
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_SHFT 4
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_MASK 0x000007fffffffff0UL
+
+union uvh_lb_bau_intd_payload_queue_last_u {
+    unsigned long	v;
+    struct uvh_lb_bau_intd_payload_queue_last_s {
+	unsigned long	rsvd_0_3:  4;  /*    */
+	unsigned long	address : 39;  /* RW */
+	unsigned long	rsvd_43_63: 21;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL                     */
+/* ========================================================================= */
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL 0x320070UL
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_32 0x009d0
+
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_SHFT 4
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_MASK 0x000007fffffffff0UL
+
+union uvh_lb_bau_intd_payload_queue_tail_u {
+    unsigned long	v;
+    struct uvh_lb_bau_intd_payload_queue_tail_s {
+	unsigned long	rsvd_0_3:  4;  /*    */
+	unsigned long	address : 39;  /* RW */
+	unsigned long	rsvd_43_63: 21;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                   UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE                    */
+/* ========================================================================= */
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE 0x320080UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_32 0x0a68
+
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_SHFT 0
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_MASK 0x0000000000000001UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_1_SHFT 1
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_1_MASK 0x0000000000000002UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_2_SHFT 2
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_2_MASK 0x0000000000000004UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_3_SHFT 3
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_3_MASK 0x0000000000000008UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_4_SHFT 4
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_4_MASK 0x0000000000000010UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_5_SHFT 5
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_5_MASK 0x0000000000000020UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_6_SHFT 6
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_6_MASK 0x0000000000000040UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_7_SHFT 7
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_7_MASK 0x0000000000000080UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_0_SHFT 8
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_0_MASK 0x0000000000000100UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_1_SHFT 9
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_1_MASK 0x0000000000000200UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_2_SHFT 10
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_2_MASK 0x0000000000000400UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_3_SHFT 11
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_3_MASK 0x0000000000000800UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_4_SHFT 12
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_4_MASK 0x0000000000001000UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_5_SHFT 13
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_5_MASK 0x0000000000002000UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_6_SHFT 14
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_6_MASK 0x0000000000004000UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_7_SHFT 15
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_7_MASK 0x0000000000008000UL
+union uvh_lb_bau_intd_software_acknowledge_u {
+    unsigned long	v;
+    struct uvh_lb_bau_intd_software_acknowledge_s {
+	unsigned long	pending_0 :  1;  /* RW, W1C */
+	unsigned long	pending_1 :  1;  /* RW, W1C */
+	unsigned long	pending_2 :  1;  /* RW, W1C */
+	unsigned long	pending_3 :  1;  /* RW, W1C */
+	unsigned long	pending_4 :  1;  /* RW, W1C */
+	unsigned long	pending_5 :  1;  /* RW, W1C */
+	unsigned long	pending_6 :  1;  /* RW, W1C */
+	unsigned long	pending_7 :  1;  /* RW, W1C */
+	unsigned long	timeout_0 :  1;  /* RW, W1C */
+	unsigned long	timeout_1 :  1;  /* RW, W1C */
+	unsigned long	timeout_2 :  1;  /* RW, W1C */
+	unsigned long	timeout_3 :  1;  /* RW, W1C */
+	unsigned long	timeout_4 :  1;  /* RW, W1C */
+	unsigned long	timeout_5 :  1;  /* RW, W1C */
+	unsigned long	timeout_6 :  1;  /* RW, W1C */
+	unsigned long	timeout_7 :  1;  /* RW, W1C */
+	unsigned long	rsvd_16_63: 48;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS                 */
+/* ========================================================================= */
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS 0x0000000000320088UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS_32 0x0a70
+
+/* ========================================================================= */
+/*                     UVH_LB_BAU_SB_ACTIVATION_CONTROL                      */
+/* ========================================================================= */
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL 0x320020UL
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_32 0x009a8
+
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INDEX_SHFT 0
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INDEX_MASK 0x000000000000003fUL
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT 62
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_MASK 0x4000000000000000UL
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INIT_SHFT 63
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INIT_MASK 0x8000000000000000UL
+
+union uvh_lb_bau_sb_activation_control_u {
+    unsigned long	v;
+    struct uvh_lb_bau_sb_activation_control_s {
+	unsigned long	index :  6;  /* RW */
+	unsigned long	rsvd_6_61: 56;  /*    */
+	unsigned long	push  :  1;  /* WP */
+	unsigned long	init  :  1;  /* WP */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_LB_BAU_SB_ACTIVATION_STATUS_0                      */
+/* ========================================================================= */
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0 0x320030UL
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_32 0x009b0
+
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_STATUS_SHFT 0
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_STATUS_MASK 0xffffffffffffffffUL
+
+union uvh_lb_bau_sb_activation_status_0_u {
+    unsigned long	v;
+    struct uvh_lb_bau_sb_activation_status_0_s {
+	unsigned long	status : 64;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_LB_BAU_SB_ACTIVATION_STATUS_1                      */
+/* ========================================================================= */
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1 0x320040UL
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_32 0x009b8
+
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_STATUS_SHFT 0
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_STATUS_MASK 0xffffffffffffffffUL
+
+union uvh_lb_bau_sb_activation_status_1_u {
+    unsigned long	v;
+    struct uvh_lb_bau_sb_activation_status_1_s {
+	unsigned long	status : 64;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                      UVH_LB_BAU_SB_DESCRIPTOR_BASE                        */
+/* ========================================================================= */
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE 0x320010UL
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_32 0x009a0
+
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_PAGE_ADDRESS_SHFT 12
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_PAGE_ADDRESS_MASK 0x000007fffffff000UL
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_SHFT 49
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_MASK 0x7ffe000000000000UL
+
+union uvh_lb_bau_sb_descriptor_base_u {
+    unsigned long	v;
+    struct uvh_lb_bau_sb_descriptor_base_s {
+	unsigned long	rsvd_0_11    : 12;  /*    */
+	unsigned long	page_address : 31;  /* RW */
+	unsigned long	rsvd_43_48   :  6;  /*    */
+	unsigned long	node_id      : 14;  /* RW */
+	unsigned long	rsvd_63      :  1;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                      UVH_LB_MCAST_AOERR0_RPT_ENABLE                       */
+/* ========================================================================= */
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE 0x50b20UL
+
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_OBESE_MSG_SHFT 0
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_OBESE_MSG_MASK 0x0000000000000001UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_DATA_SB_ERR_SHFT 1
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_DATA_SB_ERR_MASK 0x0000000000000002UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_NACK_BUFF_PARITY_SHFT 2
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_NACK_BUFF_PARITY_MASK 0x0000000000000004UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_TIMEOUT_SHFT 3
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_TIMEOUT_MASK 0x0000000000000008UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_INACTIVE_REPLY_SHFT 4
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_INACTIVE_REPLY_MASK 0x0000000000000010UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_UPGRADE_ERROR_SHFT 5
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_UPGRADE_ERROR_MASK 0x0000000000000020UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REG_COUNT_UNDERFLOW_SHFT 6
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REG_COUNT_UNDERFLOW_MASK 0x0000000000000040UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REP_OBESE_MSG_SHFT 7
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REP_OBESE_MSG_MASK 0x0000000000000080UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_RUNT_MSG_SHFT 8
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_RUNT_MSG_MASK 0x0000000000000100UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_OBESE_MSG_SHFT 9
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_OBESE_MSG_MASK 0x0000000000000200UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_DATA_SB_ERR_SHFT 10
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_DATA_SB_ERR_MASK 0x0000000000000400UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_RUNT_MSG_SHFT 11
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_RUNT_MSG_MASK 0x0000000000000800UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_OBESE_MSG_SHFT 12
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_OBESE_MSG_MASK 0x0000000000001000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_DATA_SB_ERR_SHFT 13
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_DATA_SB_ERR_MASK 0x0000000000002000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_COMMAND_ERR_SHFT 14
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_COMMAND_ERR_MASK 0x0000000000004000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_PEND_TIMEOUT_SHFT 15
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_PEND_TIMEOUT_MASK 0x0000000000008000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_RUNT_MSG_SHFT 16
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_RUNT_MSG_MASK 0x0000000000010000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_OBESE_MSG_SHFT 17
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_OBESE_MSG_MASK 0x0000000000020000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_DATA_SB_ERR_SHFT 18
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_DATA_SB_ERR_MASK 0x0000000000040000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_RUNT_MSG_SHFT 19
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_RUNT_MSG_MASK 0x0000000000080000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_OBESE_MSG_SHFT 20
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_OBESE_MSG_MASK 0x0000000000100000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_DATA_SB_ERR_SHFT 21
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_DATA_SB_ERR_MASK 0x0000000000200000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_AMO_TIMEOUT_SHFT 22
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_AMO_TIMEOUT_MASK 0x0000000000400000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_PUT_TIMEOUT_SHFT 23
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_PUT_TIMEOUT_MASK 0x0000000000800000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_SPURIOUS_EVENT_SHFT 24
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_SPURIOUS_EVENT_MASK 0x0000000001000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IOH_DESTINATION_TABLE_PARITY_SHFT 25
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IOH_DESTINATION_TABLE_PARITY_MASK 0x0000000002000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_HAD_ERROR_REPLY_SHFT 26
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_HAD_ERROR_REPLY_MASK 0x0000000004000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_TIMEOUT_SHFT 27
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_TIMEOUT_MASK 0x0000000008000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_LOCK_MANAGER_HAD_ERROR_REPLY_SHFT 28
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_LOCK_MANAGER_HAD_ERROR_REPLY_MASK 0x0000000010000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_HAD_ERROR_REPLY_SHFT 29
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_HAD_ERROR_REPLY_MASK 0x0000000020000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_TIMEOUT_SHFT 30
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_TIMEOUT_MASK 0x0000000040000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SB_ACTIVATION_OVERRUN_SHFT 31
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SB_ACTIVATION_OVERRUN_MASK 0x0000000080000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_HAD_ERROR_REPLY_SHFT 32
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_HAD_ERROR_REPLY_MASK 0x0000000100000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_TIMEOUT_SHFT 33
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_TIMEOUT_MASK 0x0000000200000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_0_PARITY_SHFT 34
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_0_PARITY_MASK 0x0000000400000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_1_PARITY_SHFT 35
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_1_PARITY_MASK 0x0000000800000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SOCKET_DESTINATION_TABLE_PARITY_SHFT 36
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SOCKET_DESTINATION_TABLE_PARITY_MASK 0x0000001000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_BAU_REPLY_PAYLOAD_CORRUPTION_SHFT 37
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_BAU_REPLY_PAYLOAD_CORRUPTION_MASK 0x0000002000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IO_PORT_DESTINATION_TABLE_PARITY_SHFT 38
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IO_PORT_DESTINATION_TABLE_PARITY_MASK 0x0000004000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INTD_SOFT_ACK_TIMEOUT_SHFT 39
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INTD_SOFT_ACK_TIMEOUT_MASK 0x0000008000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_OBESE_MSG_SHFT 40
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_OBESE_MSG_MASK 0x0000010000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_COMMAND_ERR_SHFT 41
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_COMMAND_ERR_MASK 0x0000020000000000UL
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_TIMEOUT_SHFT 42
+#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_TIMEOUT_MASK 0x0000040000000000UL
+
+union uvh_lb_mcast_aoerr0_rpt_enable_u {
+    unsigned long	v;
+    struct uvh_lb_mcast_aoerr0_rpt_enable_s {
+	unsigned long	mcast_obese_msg                         :  1;  /* RW */
+	unsigned long	mcast_data_sb_err                       :  1;  /* RW */
+	unsigned long	mcast_nack_buff_parity                  :  1;  /* RW */
+	unsigned long	mcast_timeout                           :  1;  /* RW */
+	unsigned long	mcast_inactive_reply                    :  1;  /* RW */
+	unsigned long	mcast_upgrade_error                     :  1;  /* RW */
+	unsigned long	mcast_reg_count_underflow               :  1;  /* RW */
+	unsigned long	mcast_rep_obese_msg                     :  1;  /* RW */
+	unsigned long	ucache_req_runt_msg                     :  1;  /* RW */
+	unsigned long	ucache_req_obese_msg                    :  1;  /* RW */
+	unsigned long	ucache_req_data_sb_err                  :  1;  /* RW */
+	unsigned long	ucache_rep_runt_msg                     :  1;  /* RW */
+	unsigned long	ucache_rep_obese_msg                    :  1;  /* RW */
+	unsigned long	ucache_rep_data_sb_err                  :  1;  /* RW */
+	unsigned long	ucache_rep_command_err                  :  1;  /* RW */
+	unsigned long	ucache_pend_timeout                     :  1;  /* RW */
+	unsigned long	macc_req_runt_msg                       :  1;  /* RW */
+	unsigned long	macc_req_obese_msg                      :  1;  /* RW */
+	unsigned long	macc_req_data_sb_err                    :  1;  /* RW */
+	unsigned long	macc_rep_runt_msg                       :  1;  /* RW */
+	unsigned long	macc_rep_obese_msg                      :  1;  /* RW */
+	unsigned long	macc_rep_data_sb_err                    :  1;  /* RW */
+	unsigned long	macc_amo_timeout                        :  1;  /* RW */
+	unsigned long	macc_put_timeout                        :  1;  /* RW */
+	unsigned long	macc_spurious_event                     :  1;  /* RW */
+	unsigned long	ioh_destination_table_parity            :  1;  /* RW */
+	unsigned long	get_had_error_reply                     :  1;  /* RW */
+	unsigned long	get_timeout                             :  1;  /* RW */
+	unsigned long	lock_manager_had_error_reply            :  1;  /* RW */
+	unsigned long	put_had_error_reply                     :  1;  /* RW */
+	unsigned long	put_timeout                             :  1;  /* RW */
+	unsigned long	sb_activation_overrun                   :  1;  /* RW */
+	unsigned long	completed_gb_activation_had_error_reply :  1;  /* RW */
+	unsigned long	completed_gb_activation_timeout         :  1;  /* RW */
+	unsigned long	descriptor_buffer_0_parity              :  1;  /* RW */
+	unsigned long	descriptor_buffer_1_parity              :  1;  /* RW */
+	unsigned long	socket_destination_table_parity         :  1;  /* RW */
+	unsigned long	bau_reply_payload_corruption            :  1;  /* RW */
+	unsigned long	io_port_destination_table_parity        :  1;  /* RW */
+	unsigned long	intd_soft_ack_timeout                   :  1;  /* RW */
+	unsigned long	int_rep_obese_msg                       :  1;  /* RW */
+	unsigned long	int_rep_command_err                     :  1;  /* RW */
+	unsigned long	int_timeout                             :  1;  /* RW */
+	unsigned long	rsvd_43_63                              : 21;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                          UVH_LOCAL_INT0_CONFIG                            */
+/* ========================================================================= */
+#define UVH_LOCAL_INT0_CONFIG 0x61000UL
+
+#define UVH_LOCAL_INT0_CONFIG_VECTOR_SHFT 0
+#define UVH_LOCAL_INT0_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_LOCAL_INT0_CONFIG_DM_SHFT 8
+#define UVH_LOCAL_INT0_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_LOCAL_INT0_CONFIG_DESTMODE_SHFT 11
+#define UVH_LOCAL_INT0_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_LOCAL_INT0_CONFIG_STATUS_SHFT 12
+#define UVH_LOCAL_INT0_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_LOCAL_INT0_CONFIG_P_SHFT 13
+#define UVH_LOCAL_INT0_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_LOCAL_INT0_CONFIG_T_SHFT 15
+#define UVH_LOCAL_INT0_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_LOCAL_INT0_CONFIG_M_SHFT 16
+#define UVH_LOCAL_INT0_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_LOCAL_INT0_CONFIG_APIC_ID_SHFT 32
+#define UVH_LOCAL_INT0_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_local_int0_config_u {
+    unsigned long	v;
+    struct uvh_local_int0_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                          UVH_LOCAL_INT0_ENABLE                            */
+/* ========================================================================= */
+#define UVH_LOCAL_INT0_ENABLE 0x65000UL
+
+#define UVH_LOCAL_INT0_ENABLE_LB_HCERR_SHFT 0
+#define UVH_LOCAL_INT0_ENABLE_LB_HCERR_MASK 0x0000000000000001UL
+#define UVH_LOCAL_INT0_ENABLE_GR0_HCERR_SHFT 1
+#define UVH_LOCAL_INT0_ENABLE_GR0_HCERR_MASK 0x0000000000000002UL
+#define UVH_LOCAL_INT0_ENABLE_GR1_HCERR_SHFT 2
+#define UVH_LOCAL_INT0_ENABLE_GR1_HCERR_MASK 0x0000000000000004UL
+#define UVH_LOCAL_INT0_ENABLE_LH_HCERR_SHFT 3
+#define UVH_LOCAL_INT0_ENABLE_LH_HCERR_MASK 0x0000000000000008UL
+#define UVH_LOCAL_INT0_ENABLE_RH_HCERR_SHFT 4
+#define UVH_LOCAL_INT0_ENABLE_RH_HCERR_MASK 0x0000000000000010UL
+#define UVH_LOCAL_INT0_ENABLE_XN_HCERR_SHFT 5
+#define UVH_LOCAL_INT0_ENABLE_XN_HCERR_MASK 0x0000000000000020UL
+#define UVH_LOCAL_INT0_ENABLE_SI_HCERR_SHFT 6
+#define UVH_LOCAL_INT0_ENABLE_SI_HCERR_MASK 0x0000000000000040UL
+#define UVH_LOCAL_INT0_ENABLE_LB_AOERR0_SHFT 7
+#define UVH_LOCAL_INT0_ENABLE_LB_AOERR0_MASK 0x0000000000000080UL
+#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR0_SHFT 8
+#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR0_MASK 0x0000000000000100UL
+#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR0_SHFT 9
+#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR0_MASK 0x0000000000000200UL
+#define UVH_LOCAL_INT0_ENABLE_LH_AOERR0_SHFT 10
+#define UVH_LOCAL_INT0_ENABLE_LH_AOERR0_MASK 0x0000000000000400UL
+#define UVH_LOCAL_INT0_ENABLE_RH_AOERR0_SHFT 11
+#define UVH_LOCAL_INT0_ENABLE_RH_AOERR0_MASK 0x0000000000000800UL
+#define UVH_LOCAL_INT0_ENABLE_XN_AOERR0_SHFT 12
+#define UVH_LOCAL_INT0_ENABLE_XN_AOERR0_MASK 0x0000000000001000UL
+#define UVH_LOCAL_INT0_ENABLE_SI_AOERR0_SHFT 13
+#define UVH_LOCAL_INT0_ENABLE_SI_AOERR0_MASK 0x0000000000002000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_AOERR1_SHFT 14
+#define UVH_LOCAL_INT0_ENABLE_LB_AOERR1_MASK 0x0000000000004000UL
+#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR1_SHFT 15
+#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR1_MASK 0x0000000000008000UL
+#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR1_SHFT 16
+#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR1_MASK 0x0000000000010000UL
+#define UVH_LOCAL_INT0_ENABLE_LH_AOERR1_SHFT 17
+#define UVH_LOCAL_INT0_ENABLE_LH_AOERR1_MASK 0x0000000000020000UL
+#define UVH_LOCAL_INT0_ENABLE_RH_AOERR1_SHFT 18
+#define UVH_LOCAL_INT0_ENABLE_RH_AOERR1_MASK 0x0000000000040000UL
+#define UVH_LOCAL_INT0_ENABLE_XN_AOERR1_SHFT 19
+#define UVH_LOCAL_INT0_ENABLE_XN_AOERR1_MASK 0x0000000000080000UL
+#define UVH_LOCAL_INT0_ENABLE_SI_AOERR1_SHFT 20
+#define UVH_LOCAL_INT0_ENABLE_SI_AOERR1_MASK 0x0000000000100000UL
+#define UVH_LOCAL_INT0_ENABLE_RH_VPI_INT_SHFT 21
+#define UVH_LOCAL_INT0_ENABLE_RH_VPI_INT_MASK 0x0000000000200000UL
+#define UVH_LOCAL_INT0_ENABLE_SYSTEM_SHUTDOWN_INT_SHFT 22
+#define UVH_LOCAL_INT0_ENABLE_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_0_SHFT 23
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_0_MASK 0x0000000000800000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_1_SHFT 24
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_1_MASK 0x0000000001000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_2_SHFT 25
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_2_MASK 0x0000000002000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_3_SHFT 26
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_3_MASK 0x0000000004000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_4_SHFT 27
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_4_MASK 0x0000000008000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_5_SHFT 28
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_5_MASK 0x0000000010000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_6_SHFT 29
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_6_MASK 0x0000000020000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_7_SHFT 30
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_7_MASK 0x0000000040000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_8_SHFT 31
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_8_MASK 0x0000000080000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_9_SHFT 32
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_9_MASK 0x0000000100000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_10_SHFT 33
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_10_MASK 0x0000000200000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_11_SHFT 34
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_11_MASK 0x0000000400000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_12_SHFT 35
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_12_MASK 0x0000000800000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_13_SHFT 36
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_13_MASK 0x0000001000000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_14_SHFT 37
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_14_MASK 0x0000002000000000UL
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_15_SHFT 38
+#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_15_MASK 0x0000004000000000UL
+#define UVH_LOCAL_INT0_ENABLE_L1_NMI_INT_SHFT 39
+#define UVH_LOCAL_INT0_ENABLE_L1_NMI_INT_MASK 0x0000008000000000UL
+#define UVH_LOCAL_INT0_ENABLE_STOP_CLOCK_SHFT 40
+#define UVH_LOCAL_INT0_ENABLE_STOP_CLOCK_MASK 0x0000010000000000UL
+#define UVH_LOCAL_INT0_ENABLE_ASIC_TO_L1_SHFT 41
+#define UVH_LOCAL_INT0_ENABLE_ASIC_TO_L1_MASK 0x0000020000000000UL
+#define UVH_LOCAL_INT0_ENABLE_L1_TO_ASIC_SHFT 42
+#define UVH_LOCAL_INT0_ENABLE_L1_TO_ASIC_MASK 0x0000040000000000UL
+#define UVH_LOCAL_INT0_ENABLE_LTC_INT_SHFT 43
+#define UVH_LOCAL_INT0_ENABLE_LTC_INT_MASK 0x0000080000000000UL
+#define UVH_LOCAL_INT0_ENABLE_LA_SEQ_TRIGGER_SHFT 44
+#define UVH_LOCAL_INT0_ENABLE_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL
+
+union uvh_local_int0_enable_u {
+    unsigned long	v;
+    struct uvh_local_int0_enable_s {
+	unsigned long	lb_hcerr            :  1;  /* RW */
+	unsigned long	gr0_hcerr           :  1;  /* RW */
+	unsigned long	gr1_hcerr           :  1;  /* RW */
+	unsigned long	lh_hcerr            :  1;  /* RW */
+	unsigned long	rh_hcerr            :  1;  /* RW */
+	unsigned long	xn_hcerr            :  1;  /* RW */
+	unsigned long	si_hcerr            :  1;  /* RW */
+	unsigned long	lb_aoerr0           :  1;  /* RW */
+	unsigned long	gr0_aoerr0          :  1;  /* RW */
+	unsigned long	gr1_aoerr0          :  1;  /* RW */
+	unsigned long	lh_aoerr0           :  1;  /* RW */
+	unsigned long	rh_aoerr0           :  1;  /* RW */
+	unsigned long	xn_aoerr0           :  1;  /* RW */
+	unsigned long	si_aoerr0           :  1;  /* RW */
+	unsigned long	lb_aoerr1           :  1;  /* RW */
+	unsigned long	gr0_aoerr1          :  1;  /* RW */
+	unsigned long	gr1_aoerr1          :  1;  /* RW */
+	unsigned long	lh_aoerr1           :  1;  /* RW */
+	unsigned long	rh_aoerr1           :  1;  /* RW */
+	unsigned long	xn_aoerr1           :  1;  /* RW */
+	unsigned long	si_aoerr1           :  1;  /* RW */
+	unsigned long	rh_vpi_int          :  1;  /* RW */
+	unsigned long	system_shutdown_int :  1;  /* RW */
+	unsigned long	lb_irq_int_0        :  1;  /* RW */
+	unsigned long	lb_irq_int_1        :  1;  /* RW */
+	unsigned long	lb_irq_int_2        :  1;  /* RW */
+	unsigned long	lb_irq_int_3        :  1;  /* RW */
+	unsigned long	lb_irq_int_4        :  1;  /* RW */
+	unsigned long	lb_irq_int_5        :  1;  /* RW */
+	unsigned long	lb_irq_int_6        :  1;  /* RW */
+	unsigned long	lb_irq_int_7        :  1;  /* RW */
+	unsigned long	lb_irq_int_8        :  1;  /* RW */
+	unsigned long	lb_irq_int_9        :  1;  /* RW */
+	unsigned long	lb_irq_int_10       :  1;  /* RW */
+	unsigned long	lb_irq_int_11       :  1;  /* RW */
+	unsigned long	lb_irq_int_12       :  1;  /* RW */
+	unsigned long	lb_irq_int_13       :  1;  /* RW */
+	unsigned long	lb_irq_int_14       :  1;  /* RW */
+	unsigned long	lb_irq_int_15       :  1;  /* RW */
+	unsigned long	l1_nmi_int          :  1;  /* RW */
+	unsigned long	stop_clock          :  1;  /* RW */
+	unsigned long	asic_to_l1          :  1;  /* RW */
+	unsigned long	l1_to_asic          :  1;  /* RW */
+	unsigned long	ltc_int             :  1;  /* RW */
+	unsigned long	la_seq_trigger      :  1;  /* RW */
+	unsigned long	rsvd_45_63          : 19;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                               UVH_NODE_ID                                 */
+/* ========================================================================= */
+#define UVH_NODE_ID 0x0UL
+
+#define UVH_NODE_ID_FORCE1_SHFT 0
+#define UVH_NODE_ID_FORCE1_MASK 0x0000000000000001UL
+#define UVH_NODE_ID_MANUFACTURER_SHFT 1
+#define UVH_NODE_ID_MANUFACTURER_MASK 0x0000000000000ffeUL
+#define UVH_NODE_ID_PART_NUMBER_SHFT 12
+#define UVH_NODE_ID_PART_NUMBER_MASK 0x000000000ffff000UL
+#define UVH_NODE_ID_REVISION_SHFT 28
+#define UVH_NODE_ID_REVISION_MASK 0x00000000f0000000UL
+#define UVH_NODE_ID_NODE_ID_SHFT 32
+#define UVH_NODE_ID_NODE_ID_MASK 0x00007fff00000000UL
+#define UVH_NODE_ID_NODES_PER_BIT_SHFT 48
+#define UVH_NODE_ID_NODES_PER_BIT_MASK 0x007f000000000000UL
+#define UVH_NODE_ID_NI_PORT_SHFT 56
+#define UVH_NODE_ID_NI_PORT_MASK 0x0f00000000000000UL
+
+union uvh_node_id_u {
+    unsigned long	v;
+    struct uvh_node_id_s {
+	unsigned long	force1        :  1;  /* RO */
+	unsigned long	manufacturer  : 11;  /* RO */
+	unsigned long	part_number   : 16;  /* RO */
+	unsigned long	revision      :  4;  /* RO */
+	unsigned long	node_id       : 15;  /* RW */
+	unsigned long	rsvd_47       :  1;  /*    */
+	unsigned long	nodes_per_bit :  7;  /* RW */
+	unsigned long	rsvd_55       :  1;  /*    */
+	unsigned long	ni_port       :  4;  /* RO */
+	unsigned long	rsvd_60_63    :  4;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                          UVH_NODE_PRESENT_TABLE                           */
+/* ========================================================================= */
+#define UVH_NODE_PRESENT_TABLE 0x1400UL
+#define UVH_NODE_PRESENT_TABLE_DEPTH 16
+
+#define UVH_NODE_PRESENT_TABLE_NODES_SHFT 0
+#define UVH_NODE_PRESENT_TABLE_NODES_MASK 0xffffffffffffffffUL
+
+union uvh_node_present_table_u {
+    unsigned long	v;
+    struct uvh_node_present_table_s {
+	unsigned long	nodes : 64;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_0_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_redirect_config_0_mmr_s {
+	unsigned long	rsvd_0_23 : 24;  /*    */
+	unsigned long	dest_base : 22;  /* RW */
+	unsigned long	rsvd_46_63: 18;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_1_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_redirect_config_1_mmr_s {
+	unsigned long	rsvd_0_23 : 24;  /*    */
+	unsigned long	dest_base : 22;  /* RW */
+	unsigned long	rsvd_46_63: 18;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_redirect_config_2_mmr_s {
+	unsigned long	rsvd_0_23 : 24;  /*    */
+	unsigned long	dest_base : 22;  /* RW */
+	unsigned long	rsvd_46_63: 18;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR                      */
+/* ========================================================================= */
+#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR 0x1600020UL
+
+#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_SHFT 26
+#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
+#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_cfg_overlay_config_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_cfg_overlay_config_mmr_s {
+	unsigned long	rsvd_0_25: 26;  /*    */
+	unsigned long	base   : 20;  /* RW */
+	unsigned long	rsvd_46_62: 17;  /*    */
+	unsigned long	enable :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR                      */
+/* ========================================================================= */
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
+
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_SHFT 48
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_MASK 0x0001000000000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_gru_overlay_config_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_gru_overlay_config_mmr_s {
+	unsigned long	rsvd_0_27: 28;  /*    */
+	unsigned long	base   : 18;  /* RW */
+	unsigned long	rsvd_46_47:  2;  /*    */
+	unsigned long	gr4    :  1;  /* RW */
+	unsigned long	rsvd_49_51:  3;  /*    */
+	unsigned long	n_gru  :  4;  /* RW */
+	unsigned long	rsvd_56_62:  7;  /*    */
+	unsigned long	enable :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                   UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR                     */
+/* ========================================================================= */
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR 0x1600030UL
+
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT 30
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003fffc0000000UL
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_SHFT 46
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_MASK 0x000fc00000000000UL
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_SHFT 52
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_MASK 0x00f0000000000000UL
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_mmioh_overlay_config_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_mmioh_overlay_config_mmr_s {
+	unsigned long	rsvd_0_29: 30;  /*    */
+	unsigned long	base   : 16;  /* RW */
+	unsigned long	m_io   :  6;  /* RW */
+	unsigned long	n_io   :  4;  /* RW */
+	unsigned long	rsvd_56_62:  7;  /*    */
+	unsigned long	enable :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR                      */
+/* ========================================================================= */
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
+
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_SHFT 46
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_MASK 0x0000400000000000UL
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_mmr_overlay_config_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_mmr_overlay_config_mmr_s {
+	unsigned long	rsvd_0_25: 26;  /*    */
+	unsigned long	base     : 20;  /* RW */
+	unsigned long	dual_hub :  1;  /* RW */
+	unsigned long	rsvd_47_62: 16;  /*    */
+	unsigned long	enable   :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                                 UVH_RTC                                   */
+/* ========================================================================= */
+#define UVH_RTC 0x340000UL
+
+#define UVH_RTC_REAL_TIME_CLOCK_SHFT 0
+#define UVH_RTC_REAL_TIME_CLOCK_MASK 0x00ffffffffffffffUL
+
+union uvh_rtc_u {
+    unsigned long	v;
+    struct uvh_rtc_s {
+	unsigned long	real_time_clock : 56;  /* RW */
+	unsigned long	rsvd_56_63      :  8;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                           UVH_RTC1_INT_CONFIG                             */
+/* ========================================================================= */
+#define UVH_RTC1_INT_CONFIG 0x615c0UL
+
+#define UVH_RTC1_INT_CONFIG_VECTOR_SHFT 0
+#define UVH_RTC1_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_RTC1_INT_CONFIG_DM_SHFT 8
+#define UVH_RTC1_INT_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_RTC1_INT_CONFIG_DESTMODE_SHFT 11
+#define UVH_RTC1_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_RTC1_INT_CONFIG_STATUS_SHFT 12
+#define UVH_RTC1_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_RTC1_INT_CONFIG_P_SHFT 13
+#define UVH_RTC1_INT_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_RTC1_INT_CONFIG_T_SHFT 15
+#define UVH_RTC1_INT_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_RTC1_INT_CONFIG_M_SHFT 16
+#define UVH_RTC1_INT_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_RTC1_INT_CONFIG_APIC_ID_SHFT 32
+#define UVH_RTC1_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_rtc1_int_config_u {
+    unsigned long	v;
+    struct uvh_rtc1_int_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                           UVH_RTC2_INT_CONFIG                             */
+/* ========================================================================= */
+#define UVH_RTC2_INT_CONFIG 0x61600UL
+
+#define UVH_RTC2_INT_CONFIG_VECTOR_SHFT 0
+#define UVH_RTC2_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_RTC2_INT_CONFIG_DM_SHFT 8
+#define UVH_RTC2_INT_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_RTC2_INT_CONFIG_DESTMODE_SHFT 11
+#define UVH_RTC2_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_RTC2_INT_CONFIG_STATUS_SHFT 12
+#define UVH_RTC2_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_RTC2_INT_CONFIG_P_SHFT 13
+#define UVH_RTC2_INT_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_RTC2_INT_CONFIG_T_SHFT 15
+#define UVH_RTC2_INT_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_RTC2_INT_CONFIG_M_SHFT 16
+#define UVH_RTC2_INT_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_RTC2_INT_CONFIG_APIC_ID_SHFT 32
+#define UVH_RTC2_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_rtc2_int_config_u {
+    unsigned long	v;
+    struct uvh_rtc2_int_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                           UVH_RTC3_INT_CONFIG                             */
+/* ========================================================================= */
+#define UVH_RTC3_INT_CONFIG 0x61640UL
+
+#define UVH_RTC3_INT_CONFIG_VECTOR_SHFT 0
+#define UVH_RTC3_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_RTC3_INT_CONFIG_DM_SHFT 8
+#define UVH_RTC3_INT_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_RTC3_INT_CONFIG_DESTMODE_SHFT 11
+#define UVH_RTC3_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_RTC3_INT_CONFIG_STATUS_SHFT 12
+#define UVH_RTC3_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_RTC3_INT_CONFIG_P_SHFT 13
+#define UVH_RTC3_INT_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_RTC3_INT_CONFIG_T_SHFT 15
+#define UVH_RTC3_INT_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_RTC3_INT_CONFIG_M_SHFT 16
+#define UVH_RTC3_INT_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_RTC3_INT_CONFIG_APIC_ID_SHFT 32
+#define UVH_RTC3_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_rtc3_int_config_u {
+    unsigned long	v;
+    struct uvh_rtc3_int_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                            UVH_RTC_INC_RATIO                              */
+/* ========================================================================= */
+#define UVH_RTC_INC_RATIO 0x350000UL
+
+#define UVH_RTC_INC_RATIO_FRACTION_SHFT 0
+#define UVH_RTC_INC_RATIO_FRACTION_MASK 0x00000000000fffffUL
+#define UVH_RTC_INC_RATIO_RATIO_SHFT 20
+#define UVH_RTC_INC_RATIO_RATIO_MASK 0x0000000000700000UL
+
+union uvh_rtc_inc_ratio_u {
+    unsigned long	v;
+    struct uvh_rtc_inc_ratio_s {
+	unsigned long	fraction : 20;  /* RW */
+	unsigned long	ratio    :  3;  /* RW */
+	unsigned long	rsvd_23_63: 41;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                          UVH_SI_ADDR_MAP_CONFIG                           */
+/* ========================================================================= */
+#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
+
+#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0
+#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL
+#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8
+#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL
+
+union uvh_si_addr_map_config_u {
+    unsigned long	v;
+    struct uvh_si_addr_map_config_s {
+	unsigned long	m_skt :  6;  /* RW */
+	unsigned long	rsvd_6_7:  2;  /*    */
+	unsigned long	n_skt :  4;  /* RW */
+	unsigned long	rsvd_12_63: 52;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                       UVH_SI_ALIAS0_OVERLAY_CONFIG                        */
+/* ========================================================================= */
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL
+
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias0_overlay_config_u {
+    unsigned long	v;
+    struct uvh_si_alias0_overlay_config_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                       UVH_SI_ALIAS1_OVERLAY_CONFIG                        */
+/* ========================================================================= */
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL
+
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias1_overlay_config_u {
+    unsigned long	v;
+    struct uvh_si_alias1_overlay_config_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                       UVH_SI_ALIAS2_OVERLAY_CONFIG                        */
+/* ========================================================================= */
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL
+
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias2_overlay_config_u {
+    unsigned long	v;
+    struct uvh_si_alias2_overlay_config_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+
+#endif /* _ASM_X86_UV_UV_MMRS_H */
diff --git a/arch/x86/include/asm/vdso.h b/arch/x86/include/asm/vdso.h
new file mode 100644
index 0000000..9064052
--- /dev/null
+++ b/arch/x86/include/asm/vdso.h
@@ -0,0 +1,47 @@
+#ifndef _ASM_X86_VDSO_H
+#define _ASM_X86_VDSO_H
+
+#ifdef CONFIG_X86_64
+extern const char VDSO64_PRELINK[];
+
+/*
+ * Given a pointer to the vDSO image, find the pointer to VDSO64_name
+ * as that symbol is defined in the vDSO sources or linker script.
+ */
+#define VDSO64_SYMBOL(base, name)					\
+({									\
+	extern const char VDSO64_##name[];				\
+	(void *)(VDSO64_##name - VDSO64_PRELINK + (unsigned long)(base)); \
+})
+#endif
+
+#if defined CONFIG_X86_32 || defined CONFIG_COMPAT
+extern const char VDSO32_PRELINK[];
+
+/*
+ * Given a pointer to the vDSO image, find the pointer to VDSO32_name
+ * as that symbol is defined in the vDSO sources or linker script.
+ */
+#define VDSO32_SYMBOL(base, name)					\
+({									\
+	extern const char VDSO32_##name[];				\
+	(void *)(VDSO32_##name - VDSO32_PRELINK + (unsigned long)(base)); \
+})
+#endif
+
+/*
+ * These symbols are defined with the addresses in the vsyscall page.
+ * See vsyscall-sigreturn.S.
+ */
+extern void __user __kernel_sigreturn;
+extern void __user __kernel_rt_sigreturn;
+
+/*
+ * These symbols are defined by vdso32.S to mark the bounds
+ * of the ELF DSO images included therein.
+ */
+extern const char vdso32_int80_start, vdso32_int80_end;
+extern const char vdso32_syscall_start, vdso32_syscall_end;
+extern const char vdso32_sysenter_start, vdso32_sysenter_end;
+
+#endif /* _ASM_X86_VDSO_H */
diff --git a/arch/x86/include/asm/vga.h b/arch/x86/include/asm/vga.h
new file mode 100644
index 0000000..c4b9dc2
--- /dev/null
+++ b/arch/x86/include/asm/vga.h
@@ -0,0 +1,20 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+#ifndef _ASM_X86_VGA_H
+#define _ASM_X86_VGA_H
+
+/*
+ *	On the PC, we can just recalculate addresses and then
+ *	access the videoram directly without any black magic.
+ */
+
+#define VGA_MAP_MEM(x, s) (unsigned long)phys_to_virt(x)
+
+#define vga_readb(x) (*(x))
+#define vga_writeb(x, y) (*(y) = (x))
+
+#endif /* _ASM_X86_VGA_H */
diff --git a/arch/x86/include/asm/vgtod.h b/arch/x86/include/asm/vgtod.h
new file mode 100644
index 0000000..dc27a69
--- /dev/null
+++ b/arch/x86/include/asm/vgtod.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_X86_VGTOD_H
+#define _ASM_X86_VGTOD_H
+
+#include <asm/vsyscall.h>
+#include <linux/clocksource.h>
+
+struct vsyscall_gtod_data {
+	seqlock_t	lock;
+
+	/* open coded 'struct timespec' */
+	time_t		wall_time_sec;
+	u32		wall_time_nsec;
+
+	int		sysctl_enabled;
+	struct timezone sys_tz;
+	struct { /* extract of a clocksource struct */
+		cycle_t (*vread)(void);
+		cycle_t	cycle_last;
+		cycle_t	mask;
+		u32	mult;
+		u32	shift;
+	} clock;
+	struct timespec wall_to_monotonic;
+};
+extern struct vsyscall_gtod_data __vsyscall_gtod_data
+__section_vsyscall_gtod_data;
+extern struct vsyscall_gtod_data vsyscall_gtod_data;
+
+#endif /* _ASM_X86_VGTOD_H */
diff --git a/include/asm-x86/vic.h b/arch/x86/include/asm/vic.h
similarity index 100%
rename from include/asm-x86/vic.h
rename to arch/x86/include/asm/vic.h
diff --git a/arch/x86/include/asm/visws/cobalt.h b/arch/x86/include/asm/visws/cobalt.h
new file mode 100644
index 0000000..166adf6
--- /dev/null
+++ b/arch/x86/include/asm/visws/cobalt.h
@@ -0,0 +1,125 @@
+#ifndef _ASM_X86_VISWS_COBALT_H
+#define _ASM_X86_VISWS_COBALT_H
+
+#include <asm/fixmap.h>
+
+/*
+ * Cobalt SGI Visual Workstation system ASIC
+ */ 
+
+#define CO_CPU_NUM_PHYS 0x1e00
+#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2)
+
+#define CO_CPU_MAX 4
+
+#define	CO_CPU_PHYS		0xc2000000
+#define	CO_APIC_PHYS		0xc4000000
+
+/* see set_fixmap() and asm/fixmap.h */
+#define	CO_CPU_VADDR		(fix_to_virt(FIX_CO_CPU))
+#define	CO_APIC_VADDR		(fix_to_virt(FIX_CO_APIC))
+
+/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */
+#define	CO_CPU_REV		0x08
+#define	CO_CPU_CTRL		0x10
+#define	CO_CPU_STAT		0x20
+#define	CO_CPU_TIMEVAL		0x30
+
+/* CO_CPU_CTRL bits */
+#define	CO_CTRL_TIMERUN		0x04		/* 0 == disabled */
+#define	CO_CTRL_TIMEMASK	0x08		/* 0 == unmasked */
+
+/* CO_CPU_STATUS bits */
+#define	CO_STAT_TIMEINTR	0x02	/* (r) 1 == int pend, (w) 0 == clear */
+
+/* CO_CPU_TIMEVAL value */
+#define	CO_TIME_HZ		100000000	/* Cobalt core rate */
+
+/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */
+#define	CO_APIC_HI(n)		(((n) * 0x10) + 4)
+#define	CO_APIC_LO(n)		((n) * 0x10)
+#define	CO_APIC_ID		0x0ffc
+
+/* CO_APIC_ID bits */
+#define	CO_APIC_ENABLE		0x00000100
+
+/* CO_APIC_LO bits */
+#define	CO_APIC_MASK		0x00010000	/* 0 = enabled */
+#define	CO_APIC_LEVEL		0x00008000	/* 0 = edge */
+
+/*
+ * Where things are physically wired to Cobalt
+ * #defines with no board _<type>_<rev>_ are common to all (thus far)
+ */
+#define	CO_APIC_IDE0		4
+#define CO_APIC_IDE1		2		/* Only on 320 */
+
+#define	CO_APIC_8259		12		/* serial, floppy, par-l-l */
+
+/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */
+#define	CO_APIC_PCIA_BASE0	0 /* and 1 */	/* slot 0, line 0 */
+#define	CO_APIC_PCIA_BASE123	5 /* and 6 */	/* slot 0, line 1 */
+
+#define	CO_APIC_PIIX4_USB	7		/* this one is weird */
+
+/* Lithium PCI Bridge B -- "the one with PIIX4" */
+#define	CO_APIC_PCIB_BASE0	8 /* and 9-12 *//* slot 0, line 0 */
+#define	CO_APIC_PCIB_BASE123	13 /* 14.15 */	/* slot 0, line 1 */
+
+#define	CO_APIC_VIDOUT0		16
+#define	CO_APIC_VIDOUT1		17
+#define	CO_APIC_VIDIN0		18
+#define	CO_APIC_VIDIN1		19
+
+#define	CO_APIC_LI_AUDIO	22
+
+#define	CO_APIC_AS		24
+#define	CO_APIC_RE		25
+
+#define CO_APIC_CPU		28		/* Timer and Cache interrupt */
+#define	CO_APIC_NMI		29
+#define	CO_APIC_LAST		CO_APIC_NMI
+
+/*
+ * This is how irqs are assigned on the Visual Workstation.
+ * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU).
+ * All other devices (including PCI) go to Cobalt and are irq's 16 on up.
+ */
+#define	CO_IRQ_APIC0	16			/* irq of apic entry 0 */
+#define	IS_CO_APIC(irq)	((irq) >= CO_IRQ_APIC0)
+#define	CO_IRQ(apic)	(CO_IRQ_APIC0 + (apic))	/* apic ent to irq */
+#define	CO_APIC(irq)	((irq) - CO_IRQ_APIC0)	/* irq to apic ent */
+#define CO_IRQ_IDE0	14			/* knowledge of... */
+#define CO_IRQ_IDE1	15			/* ... ide driver defaults! */
+#define	CO_IRQ_8259	CO_IRQ(CO_APIC_8259)
+
+#ifdef CONFIG_X86_VISWS_APIC
+static inline void co_cpu_write(unsigned long reg, unsigned long v)
+{
+	*((volatile unsigned long *)(CO_CPU_VADDR+reg))=v;
+}
+
+static inline unsigned long co_cpu_read(unsigned long reg)
+{
+	return *((volatile unsigned long *)(CO_CPU_VADDR+reg));
+}            
+             
+static inline void co_apic_write(unsigned long reg, unsigned long v)
+{
+	*((volatile unsigned long *)(CO_APIC_VADDR+reg))=v;
+}            
+             
+static inline unsigned long co_apic_read(unsigned long reg)
+{
+	return *((volatile unsigned long *)(CO_APIC_VADDR+reg));
+}
+#endif
+
+extern char visws_board_type;
+
+#define	VISWS_320	0
+#define	VISWS_540	1
+
+extern char visws_board_rev;
+
+#endif /* _ASM_X86_VISWS_COBALT_H */
diff --git a/arch/x86/include/asm/visws/lithium.h b/arch/x86/include/asm/visws/lithium.h
new file mode 100644
index 0000000..a10d89b
--- /dev/null
+++ b/arch/x86/include/asm/visws/lithium.h
@@ -0,0 +1,53 @@
+#ifndef _ASM_X86_VISWS_LITHIUM_H
+#define _ASM_X86_VISWS_LITHIUM_H
+
+#include <asm/fixmap.h>
+
+/*
+ * Lithium is the SGI Visual Workstation I/O ASIC
+ */
+
+#define	LI_PCI_A_PHYS		0xfc000000	/* Enet is dev 3 */
+#define	LI_PCI_B_PHYS		0xfd000000	/* PIIX4 is here */
+
+/* see set_fixmap() and asm/fixmap.h */
+#define LI_PCIA_VADDR   (fix_to_virt(FIX_LI_PCIA))
+#define LI_PCIB_VADDR   (fix_to_virt(FIX_LI_PCIB))
+
+/* Not a standard PCI? (not in linux/pci.h) */
+#define	LI_PCI_BUSNUM	0x44			/* lo8: primary, hi8: sub */
+#define LI_PCI_INTEN    0x46
+
+/* LI_PCI_INTENT bits */
+#define	LI_INTA_0	0x0001
+#define	LI_INTA_1	0x0002
+#define	LI_INTA_2	0x0004
+#define	LI_INTA_3	0x0008
+#define	LI_INTA_4	0x0010
+#define	LI_INTB		0x0020
+#define	LI_INTC		0x0040
+#define	LI_INTD		0x0080
+
+/* More special purpose macros... */
+static inline void li_pcia_write16(unsigned long reg, unsigned short v)
+{
+	*((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v;
+}
+
+static inline unsigned short li_pcia_read16(unsigned long reg)
+{
+	 return *((volatile unsigned short *)(LI_PCIA_VADDR+reg));
+}
+
+static inline void li_pcib_write16(unsigned long reg, unsigned short v)
+{
+	*((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v;
+}
+
+static inline unsigned short li_pcib_read16(unsigned long reg)
+{
+	return *((volatile unsigned short *)(LI_PCIB_VADDR+reg));
+}
+
+#endif /* _ASM_X86_VISWS_LITHIUM_H */
+
diff --git a/arch/x86/include/asm/visws/piix4.h b/arch/x86/include/asm/visws/piix4.h
new file mode 100644
index 0000000..d0af4d3
--- /dev/null
+++ b/arch/x86/include/asm/visws/piix4.h
@@ -0,0 +1,107 @@
+#ifndef _ASM_X86_VISWS_PIIX4_H
+#define _ASM_X86_VISWS_PIIX4_H
+
+/*
+ * PIIX4 as used on SGI Visual Workstations
+ */
+
+#define	PIIX_PM_START		0x0F80
+
+#define	SIO_GPIO_START		0x0FC0
+
+#define	SIO_PM_START		0x0FC8
+
+#define	PMBASE			PIIX_PM_START
+#define	GPIREG0			(PMBASE+0x30)
+#define	GPIREG(x)		(GPIREG0+((x)/8))
+#define	GPIBIT(x)		(1 << ((x)%8))
+
+#define	PIIX_GPI_BD_ID1		18
+#define	PIIX_GPI_BD_ID2		19
+#define	PIIX_GPI_BD_ID3		20
+#define	PIIX_GPI_BD_ID4		21
+#define	PIIX_GPI_BD_REG		GPIREG(PIIX_GPI_BD_ID1)
+#define	PIIX_GPI_BD_MASK	(GPIBIT(PIIX_GPI_BD_ID1) | \
+				GPIBIT(PIIX_GPI_BD_ID2) | \
+				GPIBIT(PIIX_GPI_BD_ID3) | \
+				GPIBIT(PIIX_GPI_BD_ID4) )
+
+#define	PIIX_GPI_BD_SHIFT	(PIIX_GPI_BD_ID1 % 8)
+
+#define	SIO_INDEX		0x2e
+#define	SIO_DATA		0x2f
+
+#define	SIO_DEV_SEL		0x7
+#define	SIO_DEV_ENB		0x30
+#define	SIO_DEV_MSB		0x60
+#define	SIO_DEV_LSB		0x61
+
+#define	SIO_GP_DEV		0x7
+
+#define	SIO_GP_BASE		SIO_GPIO_START
+#define	SIO_GP_MSB		(SIO_GP_BASE>>8)
+#define	SIO_GP_LSB		(SIO_GP_BASE&0xff)
+
+#define	SIO_GP_DATA1		(SIO_GP_BASE+0)
+
+#define	SIO_PM_DEV		0x8
+
+#define	SIO_PM_BASE		SIO_PM_START
+#define	SIO_PM_MSB		(SIO_PM_BASE>>8)
+#define	SIO_PM_LSB		(SIO_PM_BASE&0xff)
+#define	SIO_PM_INDEX		(SIO_PM_BASE+0)
+#define	SIO_PM_DATA		(SIO_PM_BASE+1)
+
+#define	SIO_PM_FER2		0x1
+
+#define	SIO_PM_GP_EN		0x80
+
+
+
+/*
+ * This is the dev/reg where generating a config cycle will
+ * result in a PCI special cycle.
+ */
+#define SPECIAL_DEV		0xff
+#define SPECIAL_REG		0x00
+
+/*
+ * PIIX4 needs to see a special cycle with the following data
+ * to be convinced the processor has gone into the stop grant
+ * state.  PIIX4 insists on seeing this before it will power
+ * down a system.
+ */
+#define PIIX_SPECIAL_STOP		0x00120002
+
+#define PIIX4_RESET_PORT	0xcf9
+#define PIIX4_RESET_VAL		0x6
+
+#define PMSTS_PORT		0xf80	// 2 bytes	PM Status
+#define PMEN_PORT		0xf82	// 2 bytes	PM Enable
+#define	PMCNTRL_PORT		0xf84	// 2 bytes	PM Control
+
+#define PM_SUSPEND_ENABLE	0x2000	// start sequence to suspend state
+
+/*
+ * PMSTS and PMEN I/O bit definitions.
+ * (Bits are the same in both registers)
+ */
+#define PM_STS_RSM		(1<<15)	// Resume Status
+#define PM_STS_PWRBTNOR		(1<<11)	// Power Button Override
+#define PM_STS_RTC		(1<<10)	// RTC status
+#define PM_STS_PWRBTN		(1<<8)	// Power Button Pressed?
+#define PM_STS_GBL		(1<<5)	// Global Status
+#define PM_STS_BM		(1<<4)	// Bus Master Status
+#define PM_STS_TMROF		(1<<0)	// Timer Overflow Status.
+
+/*
+ * Stop clock GPI register
+ */
+#define PIIX_GPIREG0			(0xf80 + 0x30)
+
+/*
+ * Stop clock GPI bit in GPIREG0
+ */
+#define	PIIX_GPI_STPCLK		0x4	// STPCLK signal routed back in
+
+#endif /* _ASM_X86_VISWS_PIIX4_H */
diff --git a/include/asm-x86/visws/sgivw.h b/arch/x86/include/asm/visws/sgivw.h
similarity index 100%
rename from include/asm-x86/visws/sgivw.h
rename to arch/x86/include/asm/visws/sgivw.h
diff --git a/arch/x86/include/asm/vm86.h b/arch/x86/include/asm/vm86.h
new file mode 100644
index 0000000..f930360
--- /dev/null
+++ b/arch/x86/include/asm/vm86.h
@@ -0,0 +1,208 @@
+#ifndef _ASM_X86_VM86_H
+#define _ASM_X86_VM86_H
+
+/*
+ * I'm guessing at the VIF/VIP flag usage, but hope that this is how
+ * the Pentium uses them. Linux will return from vm86 mode when both
+ * VIF and VIP is set.
+ *
+ * On a Pentium, we could probably optimize the virtual flags directly
+ * in the eflags register instead of doing it "by hand" in vflags...
+ *
+ * Linus
+ */
+
+#include <asm/processor-flags.h>
+
+#define BIOSSEG		0x0f000
+
+#define CPU_086		0
+#define CPU_186		1
+#define CPU_286		2
+#define CPU_386		3
+#define CPU_486		4
+#define CPU_586		5
+
+/*
+ * Return values for the 'vm86()' system call
+ */
+#define VM86_TYPE(retval)	((retval) & 0xff)
+#define VM86_ARG(retval)	((retval) >> 8)
+
+#define VM86_SIGNAL	0	/* return due to signal */
+#define VM86_UNKNOWN	1	/* unhandled GP fault
+				   - IO-instruction or similar */
+#define VM86_INTx	2	/* int3/int x instruction (ARG = x) */
+#define VM86_STI	3	/* sti/popf/iret instruction enabled
+				   virtual interrupts */
+
+/*
+ * Additional return values when invoking new vm86()
+ */
+#define VM86_PICRETURN	4	/* return due to pending PIC request */
+#define VM86_TRAP	6	/* return due to DOS-debugger request */
+
+/*
+ * function codes when invoking new vm86()
+ */
+#define VM86_PLUS_INSTALL_CHECK	0
+#define VM86_ENTER		1
+#define VM86_ENTER_NO_BYPASS	2
+#define	VM86_REQUEST_IRQ	3
+#define VM86_FREE_IRQ		4
+#define VM86_GET_IRQ_BITS	5
+#define VM86_GET_AND_RESET_IRQ	6
+
+/*
+ * This is the stack-layout seen by the user space program when we have
+ * done a translation of "SAVE_ALL" from vm86 mode. The real kernel layout
+ * is 'kernel_vm86_regs' (see below).
+ */
+
+struct vm86_regs {
+/*
+ * normal regs, with special meaning for the segment descriptors..
+ */
+	long ebx;
+	long ecx;
+	long edx;
+	long esi;
+	long edi;
+	long ebp;
+	long eax;
+	long __null_ds;
+	long __null_es;
+	long __null_fs;
+	long __null_gs;
+	long orig_eax;
+	long eip;
+	unsigned short cs, __csh;
+	long eflags;
+	long esp;
+	unsigned short ss, __ssh;
+/*
+ * these are specific to v86 mode:
+ */
+	unsigned short es, __esh;
+	unsigned short ds, __dsh;
+	unsigned short fs, __fsh;
+	unsigned short gs, __gsh;
+};
+
+struct revectored_struct {
+	unsigned long __map[8];			/* 256 bits */
+};
+
+struct vm86_struct {
+	struct vm86_regs regs;
+	unsigned long flags;
+	unsigned long screen_bitmap;
+	unsigned long cpu_type;
+	struct revectored_struct int_revectored;
+	struct revectored_struct int21_revectored;
+};
+
+/*
+ * flags masks
+ */
+#define VM86_SCREEN_BITMAP	0x0001
+
+struct vm86plus_info_struct {
+	unsigned long force_return_for_pic:1;
+	unsigned long vm86dbg_active:1;       /* for debugger */
+	unsigned long vm86dbg_TFpendig:1;     /* for debugger */
+	unsigned long unused:28;
+	unsigned long is_vm86pus:1;	      /* for vm86 internal use */
+	unsigned char vm86dbg_intxxtab[32];   /* for debugger */
+};
+struct vm86plus_struct {
+	struct vm86_regs regs;
+	unsigned long flags;
+	unsigned long screen_bitmap;
+	unsigned long cpu_type;
+	struct revectored_struct int_revectored;
+	struct revectored_struct int21_revectored;
+	struct vm86plus_info_struct vm86plus;
+};
+
+#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+
+/*
+ * This is the (kernel) stack-layout when we have done a "SAVE_ALL" from vm86
+ * mode - the main change is that the old segment descriptors aren't
+ * useful any more and are forced to be zero by the kernel (and the
+ * hardware when a trap occurs), and the real segment descriptors are
+ * at the end of the structure. Look at ptrace.h to see the "normal"
+ * setup. For user space layout see 'struct vm86_regs' above.
+ */
+
+struct kernel_vm86_regs {
+/*
+ * normal regs, with special meaning for the segment descriptors..
+ */
+	struct pt_regs pt;
+/*
+ * these are specific to v86 mode:
+ */
+	unsigned short es, __esh;
+	unsigned short ds, __dsh;
+	unsigned short fs, __fsh;
+	unsigned short gs, __gsh;
+};
+
+struct kernel_vm86_struct {
+	struct kernel_vm86_regs regs;
+/*
+ * the below part remains on the kernel stack while we are in VM86 mode.
+ * 'tss.esp0' then contains the address of VM86_TSS_ESP0 below, and when we
+ * get forced back from VM86, the CPU and "SAVE_ALL" will restore the above
+ * 'struct kernel_vm86_regs' with the then actual values.
+ * Therefore, pt_regs in fact points to a complete 'kernel_vm86_struct'
+ * in kernelspace, hence we need not reget the data from userspace.
+ */
+#define VM86_TSS_ESP0 flags
+	unsigned long flags;
+	unsigned long screen_bitmap;
+	unsigned long cpu_type;
+	struct revectored_struct int_revectored;
+	struct revectored_struct int21_revectored;
+	struct vm86plus_info_struct vm86plus;
+	struct pt_regs *regs32;   /* here we save the pointer to the old regs */
+/*
+ * The below is not part of the structure, but the stack layout continues
+ * this way. In front of 'return-eip' may be some data, depending on
+ * compilation, so we don't rely on this and save the pointer to 'oldregs'
+ * in 'regs32' above.
+ * However, with GCC-2.7.2 and the current CFLAGS you see exactly this:
+
+	long return-eip;        from call to vm86()
+	struct pt_regs oldregs;  user space registers as saved by syscall
+ */
+};
+
+#ifdef CONFIG_VM86
+
+void handle_vm86_fault(struct kernel_vm86_regs *, long);
+int handle_vm86_trap(struct kernel_vm86_regs *, long, int);
+struct pt_regs *save_v86_state(struct kernel_vm86_regs *);
+
+struct task_struct;
+void release_vm86_irqs(struct task_struct *);
+
+#else
+
+#define handle_vm86_fault(a, b)
+#define release_vm86_irqs(a)
+
+static inline int handle_vm86_trap(struct kernel_vm86_regs *a, long b, int c)
+{
+	return 0;
+}
+
+#endif /* CONFIG_VM86 */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_VM86_H */
diff --git a/include/asm-x86/vmi.h b/arch/x86/include/asm/vmi.h
similarity index 100%
rename from include/asm-x86/vmi.h
rename to arch/x86/include/asm/vmi.h
diff --git a/arch/x86/include/asm/vmi_time.h b/arch/x86/include/asm/vmi_time.h
new file mode 100644
index 0000000..c6e0bee
--- /dev/null
+++ b/arch/x86/include/asm/vmi_time.h
@@ -0,0 +1,98 @@
+/*
+ * VMI Time wrappers
+ *
+ * Copyright (C) 2006, VMware, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to dhecht@vmware.com
+ *
+ */
+
+#ifndef _ASM_X86_VMI_TIME_H
+#define _ASM_X86_VMI_TIME_H
+
+/*
+ * Raw VMI call indices for timer functions
+ */
+#define VMI_CALL_GetCycleFrequency	66
+#define VMI_CALL_GetCycleCounter	67
+#define VMI_CALL_SetAlarm		68
+#define VMI_CALL_CancelAlarm		69
+#define VMI_CALL_GetWallclockTime	70
+#define VMI_CALL_WallclockUpdated	71
+
+/* Cached VMI timer operations */
+extern struct vmi_timer_ops {
+	u64 (*get_cycle_frequency)(void);
+	u64 (*get_cycle_counter)(int);
+	u64 (*get_wallclock)(void);
+	int (*wallclock_updated)(void);
+	void (*set_alarm)(u32 flags, u64 expiry, u64 period);
+	void (*cancel_alarm)(u32 flags);
+} vmi_timer_ops;
+
+/* Prototypes */
+extern void __init vmi_time_init(void);
+extern unsigned long vmi_get_wallclock(void);
+extern int vmi_set_wallclock(unsigned long now);
+extern unsigned long long vmi_sched_clock(void);
+extern unsigned long vmi_tsc_khz(void);
+
+#ifdef CONFIG_X86_LOCAL_APIC
+extern void __devinit vmi_time_bsp_init(void);
+extern void __devinit vmi_time_ap_init(void);
+#endif
+
+/*
+ * When run under a hypervisor, a vcpu is always in one of three states:
+ * running, halted, or ready.  The vcpu is in the 'running' state if it
+ * is executing.  When the vcpu executes the halt interface, the vcpu
+ * enters the 'halted' state and remains halted until there is some work
+ * pending for the vcpu (e.g. an alarm expires, host I/O completes on
+ * behalf of virtual I/O).  At this point, the vcpu enters the 'ready'
+ * state (waiting for the hypervisor to reschedule it).  Finally, at any
+ * time when the vcpu is not in the 'running' state nor the 'halted'
+ * state, it is in the 'ready' state.
+ *
+ * Real time is advances while the vcpu is 'running', 'ready', or
+ * 'halted'.  Stolen time is the time in which the vcpu is in the
+ * 'ready' state.  Available time is the remaining time -- the vcpu is
+ * either 'running' or 'halted'.
+ *
+ * All three views of time are accessible through the VMI cycle
+ * counters.
+ */
+
+/* The cycle counters. */
+#define VMI_CYCLES_REAL         0
+#define VMI_CYCLES_AVAILABLE    1
+#define VMI_CYCLES_STOLEN       2
+
+/* The alarm interface 'flags' bits */
+#define VMI_ALARM_COUNTERS      2
+
+#define VMI_ALARM_COUNTER_MASK  0x000000ff
+
+#define VMI_ALARM_WIRED_IRQ0    0x00000000
+#define VMI_ALARM_WIRED_LVTT    0x00010000
+
+#define VMI_ALARM_IS_ONESHOT    0x00000000
+#define VMI_ALARM_IS_PERIODIC   0x00000100
+
+#define CONFIG_VMI_ALARM_HZ	100
+
+#endif /* _ASM_X86_VMI_TIME_H */
diff --git a/include/asm-x86/voyager.h b/arch/x86/include/asm/voyager.h
similarity index 100%
rename from include/asm-x86/voyager.h
rename to arch/x86/include/asm/voyager.h
diff --git a/arch/x86/include/asm/vsyscall.h b/arch/x86/include/asm/vsyscall.h
new file mode 100644
index 0000000..d0983d2
--- /dev/null
+++ b/arch/x86/include/asm/vsyscall.h
@@ -0,0 +1,44 @@
+#ifndef _ASM_X86_VSYSCALL_H
+#define _ASM_X86_VSYSCALL_H
+
+enum vsyscall_num {
+	__NR_vgettimeofday,
+	__NR_vtime,
+	__NR_vgetcpu,
+};
+
+#define VSYSCALL_START (-10UL << 20)
+#define VSYSCALL_SIZE 1024
+#define VSYSCALL_END (-2UL << 20)
+#define VSYSCALL_MAPPED_PAGES 1
+#define VSYSCALL_ADDR(vsyscall_nr) (VSYSCALL_START+VSYSCALL_SIZE*(vsyscall_nr))
+
+#ifdef __KERNEL__
+#include <linux/seqlock.h>
+
+#define __section_vgetcpu_mode __attribute__ ((unused, __section__ (".vgetcpu_mode"), aligned(16)))
+#define __section_jiffies __attribute__ ((unused, __section__ (".jiffies"), aligned(16)))
+
+/* Definitions for CONFIG_GENERIC_TIME definitions */
+#define __section_vsyscall_gtod_data __attribute__ \
+	((unused, __section__ (".vsyscall_gtod_data"),aligned(16)))
+#define __section_vsyscall_clock __attribute__ \
+	((unused, __section__ (".vsyscall_clock"),aligned(16)))
+#define __vsyscall_fn \
+	__attribute__ ((unused, __section__(".vsyscall_fn"))) notrace
+
+#define VGETCPU_RDTSCP	1
+#define VGETCPU_LSL	2
+
+extern int __vgetcpu_mode;
+extern volatile unsigned long __jiffies;
+
+/* kernel space (writeable) */
+extern int vgetcpu_mode;
+extern struct timezone sys_tz;
+
+extern void map_vsyscall(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_VSYSCALL_H */
diff --git a/include/asm-x86/xcr.h b/arch/x86/include/asm/xcr.h
similarity index 100%
rename from include/asm-x86/xcr.h
rename to arch/x86/include/asm/xcr.h
diff --git a/arch/x86/include/asm/xen/events.h b/arch/x86/include/asm/xen/events.h
new file mode 100644
index 0000000..1914418
--- /dev/null
+++ b/arch/x86/include/asm/xen/events.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_X86_XEN_EVENTS_H
+#define _ASM_X86_XEN_EVENTS_H
+
+enum ipi_vector {
+	XEN_RESCHEDULE_VECTOR,
+	XEN_CALL_FUNCTION_VECTOR,
+	XEN_CALL_FUNCTION_SINGLE_VECTOR,
+	XEN_SPIN_UNLOCK_VECTOR,
+
+	XEN_NR_IPIS,
+};
+
+static inline int xen_irqs_disabled(struct pt_regs *regs)
+{
+	return raw_irqs_disabled_flags(regs->flags);
+}
+
+static inline void xen_do_IRQ(int irq, struct pt_regs *regs)
+{
+	regs->orig_ax = ~irq;
+	do_IRQ(regs);
+}
+
+#endif /* _ASM_X86_XEN_EVENTS_H */
diff --git a/arch/x86/include/asm/xen/grant_table.h b/arch/x86/include/asm/xen/grant_table.h
new file mode 100644
index 0000000..fdbbb45
--- /dev/null
+++ b/arch/x86/include/asm/xen/grant_table.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_X86_XEN_GRANT_TABLE_H
+#define _ASM_X86_XEN_GRANT_TABLE_H
+
+#define xen_alloc_vm_area(size)	alloc_vm_area(size)
+#define xen_free_vm_area(area)	free_vm_area(area)
+
+#endif /* _ASM_X86_XEN_GRANT_TABLE_H */
diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h
new file mode 100644
index 0000000..3f6000d
--- /dev/null
+++ b/arch/x86/include/asm/xen/hypercall.h
@@ -0,0 +1,527 @@
+/******************************************************************************
+ * hypercall.h
+ *
+ * Linux-specific hypervisor handling.
+ *
+ * Copyright (c) 2002-2004, K A Fraser
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _ASM_X86_XEN_HYPERCALL_H
+#define _ASM_X86_XEN_HYPERCALL_H
+
+#include <linux/errno.h>
+#include <linux/string.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/sched.h>
+#include <xen/interface/physdev.h>
+
+/*
+ * The hypercall asms have to meet several constraints:
+ * - Work on 32- and 64-bit.
+ *    The two architectures put their arguments in different sets of
+ *    registers.
+ *
+ * - Work around asm syntax quirks
+ *    It isn't possible to specify one of the rNN registers in a
+ *    constraint, so we use explicit register variables to get the
+ *    args into the right place.
+ *
+ * - Mark all registers as potentially clobbered
+ *    Even unused parameters can be clobbered by the hypervisor, so we
+ *    need to make sure gcc knows it.
+ *
+ * - Avoid compiler bugs.
+ *    This is the tricky part.  Because x86_32 has such a constrained
+ *    register set, gcc versions below 4.3 have trouble generating
+ *    code when all the arg registers and memory are trashed by the
+ *    asm.  There are syntactically simpler ways of achieving the
+ *    semantics below, but they cause the compiler to crash.
+ *
+ *    The only combination I found which works is:
+ *     - assign the __argX variables first
+ *     - list all actually used parameters as "+r" (__argX)
+ *     - clobber the rest
+ *
+ * The result certainly isn't pretty, and it really shows up cpp's
+ * weakness as as macro language.  Sorry.  (But let's just give thanks
+ * there aren't more than 5 arguments...)
+ */
+
+extern struct { char _entry[32]; } hypercall_page[];
+
+#define __HYPERCALL		"call hypercall_page+%c[offset]"
+#define __HYPERCALL_ENTRY(x)						\
+	[offset] "i" (__HYPERVISOR_##x * sizeof(hypercall_page[0]))
+
+#ifdef CONFIG_X86_32
+#define __HYPERCALL_RETREG	"eax"
+#define __HYPERCALL_ARG1REG	"ebx"
+#define __HYPERCALL_ARG2REG	"ecx"
+#define __HYPERCALL_ARG3REG	"edx"
+#define __HYPERCALL_ARG4REG	"esi"
+#define __HYPERCALL_ARG5REG	"edi"
+#else
+#define __HYPERCALL_RETREG	"rax"
+#define __HYPERCALL_ARG1REG	"rdi"
+#define __HYPERCALL_ARG2REG	"rsi"
+#define __HYPERCALL_ARG3REG	"rdx"
+#define __HYPERCALL_ARG4REG	"r10"
+#define __HYPERCALL_ARG5REG	"r8"
+#endif
+
+#define __HYPERCALL_DECLS						\
+	register unsigned long __res  asm(__HYPERCALL_RETREG);		\
+	register unsigned long __arg1 asm(__HYPERCALL_ARG1REG) = __arg1; \
+	register unsigned long __arg2 asm(__HYPERCALL_ARG2REG) = __arg2; \
+	register unsigned long __arg3 asm(__HYPERCALL_ARG3REG) = __arg3; \
+	register unsigned long __arg4 asm(__HYPERCALL_ARG4REG) = __arg4; \
+	register unsigned long __arg5 asm(__HYPERCALL_ARG5REG) = __arg5;
+
+#define __HYPERCALL_0PARAM	"=r" (__res)
+#define __HYPERCALL_1PARAM	__HYPERCALL_0PARAM, "+r" (__arg1)
+#define __HYPERCALL_2PARAM	__HYPERCALL_1PARAM, "+r" (__arg2)
+#define __HYPERCALL_3PARAM	__HYPERCALL_2PARAM, "+r" (__arg3)
+#define __HYPERCALL_4PARAM	__HYPERCALL_3PARAM, "+r" (__arg4)
+#define __HYPERCALL_5PARAM	__HYPERCALL_4PARAM, "+r" (__arg5)
+
+#define __HYPERCALL_0ARG()
+#define __HYPERCALL_1ARG(a1)						\
+	__HYPERCALL_0ARG()		__arg1 = (unsigned long)(a1);
+#define __HYPERCALL_2ARG(a1,a2)						\
+	__HYPERCALL_1ARG(a1)		__arg2 = (unsigned long)(a2);
+#define __HYPERCALL_3ARG(a1,a2,a3)					\
+	__HYPERCALL_2ARG(a1,a2)		__arg3 = (unsigned long)(a3);
+#define __HYPERCALL_4ARG(a1,a2,a3,a4)					\
+	__HYPERCALL_3ARG(a1,a2,a3)	__arg4 = (unsigned long)(a4);
+#define __HYPERCALL_5ARG(a1,a2,a3,a4,a5)				\
+	__HYPERCALL_4ARG(a1,a2,a3,a4)	__arg5 = (unsigned long)(a5);
+
+#define __HYPERCALL_CLOBBER5	"memory"
+#define __HYPERCALL_CLOBBER4	__HYPERCALL_CLOBBER5, __HYPERCALL_ARG5REG
+#define __HYPERCALL_CLOBBER3	__HYPERCALL_CLOBBER4, __HYPERCALL_ARG4REG
+#define __HYPERCALL_CLOBBER2	__HYPERCALL_CLOBBER3, __HYPERCALL_ARG3REG
+#define __HYPERCALL_CLOBBER1	__HYPERCALL_CLOBBER2, __HYPERCALL_ARG2REG
+#define __HYPERCALL_CLOBBER0	__HYPERCALL_CLOBBER1, __HYPERCALL_ARG1REG
+
+#define _hypercall0(type, name)						\
+({									\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_0ARG();						\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_0PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER0);				\
+	(type)__res;							\
+})
+
+#define _hypercall1(type, name, a1)					\
+({									\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_1ARG(a1);						\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_1PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER1);				\
+	(type)__res;							\
+})
+
+#define _hypercall2(type, name, a1, a2)					\
+({									\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_2ARG(a1, a2);					\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_2PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER2);				\
+	(type)__res;							\
+})
+
+#define _hypercall3(type, name, a1, a2, a3)				\
+({									\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_3ARG(a1, a2, a3);					\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_3PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER3);				\
+	(type)__res;							\
+})
+
+#define _hypercall4(type, name, a1, a2, a3, a4)				\
+({									\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_4ARG(a1, a2, a3, a4);				\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_4PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER4);				\
+	(type)__res;							\
+})
+
+#define _hypercall5(type, name, a1, a2, a3, a4, a5)			\
+({									\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_5ARG(a1, a2, a3, a4, a5);				\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_5PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER5);				\
+	(type)__res;							\
+})
+
+static inline int
+HYPERVISOR_set_trap_table(struct trap_info *table)
+{
+	return _hypercall1(int, set_trap_table, table);
+}
+
+static inline int
+HYPERVISOR_mmu_update(struct mmu_update *req, int count,
+		      int *success_count, domid_t domid)
+{
+	return _hypercall4(int, mmu_update, req, count, success_count, domid);
+}
+
+static inline int
+HYPERVISOR_mmuext_op(struct mmuext_op *op, int count,
+		     int *success_count, domid_t domid)
+{
+	return _hypercall4(int, mmuext_op, op, count, success_count, domid);
+}
+
+static inline int
+HYPERVISOR_set_gdt(unsigned long *frame_list, int entries)
+{
+	return _hypercall2(int, set_gdt, frame_list, entries);
+}
+
+static inline int
+HYPERVISOR_stack_switch(unsigned long ss, unsigned long esp)
+{
+	return _hypercall2(int, stack_switch, ss, esp);
+}
+
+#ifdef CONFIG_X86_32
+static inline int
+HYPERVISOR_set_callbacks(unsigned long event_selector,
+			 unsigned long event_address,
+			 unsigned long failsafe_selector,
+			 unsigned long failsafe_address)
+{
+	return _hypercall4(int, set_callbacks,
+			   event_selector, event_address,
+			   failsafe_selector, failsafe_address);
+}
+#else  /* CONFIG_X86_64 */
+static inline int
+HYPERVISOR_set_callbacks(unsigned long event_address,
+			unsigned long failsafe_address,
+			unsigned long syscall_address)
+{
+	return _hypercall3(int, set_callbacks,
+			   event_address, failsafe_address,
+			   syscall_address);
+}
+#endif  /* CONFIG_X86_{32,64} */
+
+static inline int
+HYPERVISOR_callback_op(int cmd, void *arg)
+{
+	return _hypercall2(int, callback_op, cmd, arg);
+}
+
+static inline int
+HYPERVISOR_fpu_taskswitch(int set)
+{
+	return _hypercall1(int, fpu_taskswitch, set);
+}
+
+static inline int
+HYPERVISOR_sched_op(int cmd, void *arg)
+{
+	return _hypercall2(int, sched_op_new, cmd, arg);
+}
+
+static inline long
+HYPERVISOR_set_timer_op(u64 timeout)
+{
+	unsigned long timeout_hi = (unsigned long)(timeout>>32);
+	unsigned long timeout_lo = (unsigned long)timeout;
+	return _hypercall2(long, set_timer_op, timeout_lo, timeout_hi);
+}
+
+static inline int
+HYPERVISOR_set_debugreg(int reg, unsigned long value)
+{
+	return _hypercall2(int, set_debugreg, reg, value);
+}
+
+static inline unsigned long
+HYPERVISOR_get_debugreg(int reg)
+{
+	return _hypercall1(unsigned long, get_debugreg, reg);
+}
+
+static inline int
+HYPERVISOR_update_descriptor(u64 ma, u64 desc)
+{
+	return _hypercall4(int, update_descriptor, ma, ma>>32, desc, desc>>32);
+}
+
+static inline int
+HYPERVISOR_memory_op(unsigned int cmd, void *arg)
+{
+	return _hypercall2(int, memory_op, cmd, arg);
+}
+
+static inline int
+HYPERVISOR_multicall(void *call_list, int nr_calls)
+{
+	return _hypercall2(int, multicall, call_list, nr_calls);
+}
+
+static inline int
+HYPERVISOR_update_va_mapping(unsigned long va, pte_t new_val,
+			     unsigned long flags)
+{
+	if (sizeof(new_val) == sizeof(long))
+		return _hypercall3(int, update_va_mapping, va,
+				   new_val.pte, flags);
+	else
+		return _hypercall4(int, update_va_mapping, va,
+				   new_val.pte, new_val.pte >> 32, flags);
+}
+
+static inline int
+HYPERVISOR_event_channel_op(int cmd, void *arg)
+{
+	int rc = _hypercall2(int, event_channel_op, cmd, arg);
+	if (unlikely(rc == -ENOSYS)) {
+		struct evtchn_op op;
+		op.cmd = cmd;
+		memcpy(&op.u, arg, sizeof(op.u));
+		rc = _hypercall1(int, event_channel_op_compat, &op);
+		memcpy(arg, &op.u, sizeof(op.u));
+	}
+	return rc;
+}
+
+static inline int
+HYPERVISOR_xen_version(int cmd, void *arg)
+{
+	return _hypercall2(int, xen_version, cmd, arg);
+}
+
+static inline int
+HYPERVISOR_console_io(int cmd, int count, char *str)
+{
+	return _hypercall3(int, console_io, cmd, count, str);
+}
+
+static inline int
+HYPERVISOR_physdev_op(int cmd, void *arg)
+{
+	int rc = _hypercall2(int, physdev_op, cmd, arg);
+	if (unlikely(rc == -ENOSYS)) {
+		struct physdev_op op;
+		op.cmd = cmd;
+		memcpy(&op.u, arg, sizeof(op.u));
+		rc = _hypercall1(int, physdev_op_compat, &op);
+		memcpy(arg, &op.u, sizeof(op.u));
+	}
+	return rc;
+}
+
+static inline int
+HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count)
+{
+	return _hypercall3(int, grant_table_op, cmd, uop, count);
+}
+
+static inline int
+HYPERVISOR_update_va_mapping_otherdomain(unsigned long va, pte_t new_val,
+					 unsigned long flags, domid_t domid)
+{
+	if (sizeof(new_val) == sizeof(long))
+		return _hypercall4(int, update_va_mapping_otherdomain, va,
+				   new_val.pte, flags, domid);
+	else
+		return _hypercall5(int, update_va_mapping_otherdomain, va,
+				   new_val.pte, new_val.pte >> 32,
+				   flags, domid);
+}
+
+static inline int
+HYPERVISOR_vm_assist(unsigned int cmd, unsigned int type)
+{
+	return _hypercall2(int, vm_assist, cmd, type);
+}
+
+static inline int
+HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args)
+{
+	return _hypercall3(int, vcpu_op, cmd, vcpuid, extra_args);
+}
+
+#ifdef CONFIG_X86_64
+static inline int
+HYPERVISOR_set_segment_base(int reg, unsigned long value)
+{
+	return _hypercall2(int, set_segment_base, reg, value);
+}
+#endif
+
+static inline int
+HYPERVISOR_suspend(unsigned long srec)
+{
+	return _hypercall3(int, sched_op, SCHEDOP_shutdown,
+			   SHUTDOWN_suspend, srec);
+}
+
+static inline int
+HYPERVISOR_nmi_op(unsigned long op, unsigned long arg)
+{
+	return _hypercall2(int, nmi_op, op, arg);
+}
+
+static inline void
+MULTI_fpu_taskswitch(struct multicall_entry *mcl, int set)
+{
+	mcl->op = __HYPERVISOR_fpu_taskswitch;
+	mcl->args[0] = set;
+}
+
+static inline void
+MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va,
+			pte_t new_val, unsigned long flags)
+{
+	mcl->op = __HYPERVISOR_update_va_mapping;
+	mcl->args[0] = va;
+	if (sizeof(new_val) == sizeof(long)) {
+		mcl->args[1] = new_val.pte;
+		mcl->args[2] = flags;
+	} else {
+		mcl->args[1] = new_val.pte;
+		mcl->args[2] = new_val.pte >> 32;
+		mcl->args[3] = flags;
+	}
+}
+
+static inline void
+MULTI_grant_table_op(struct multicall_entry *mcl, unsigned int cmd,
+		     void *uop, unsigned int count)
+{
+	mcl->op = __HYPERVISOR_grant_table_op;
+	mcl->args[0] = cmd;
+	mcl->args[1] = (unsigned long)uop;
+	mcl->args[2] = count;
+}
+
+static inline void
+MULTI_update_va_mapping_otherdomain(struct multicall_entry *mcl, unsigned long va,
+				    pte_t new_val, unsigned long flags,
+				    domid_t domid)
+{
+	mcl->op = __HYPERVISOR_update_va_mapping_otherdomain;
+	mcl->args[0] = va;
+	if (sizeof(new_val) == sizeof(long)) {
+		mcl->args[1] = new_val.pte;
+		mcl->args[2] = flags;
+		mcl->args[3] = domid;
+	} else {
+		mcl->args[1] = new_val.pte;
+		mcl->args[2] = new_val.pte >> 32;
+		mcl->args[3] = flags;
+		mcl->args[4] = domid;
+	}
+}
+
+static inline void
+MULTI_update_descriptor(struct multicall_entry *mcl, u64 maddr,
+			struct desc_struct desc)
+{
+	mcl->op = __HYPERVISOR_update_descriptor;
+	if (sizeof(maddr) == sizeof(long)) {
+		mcl->args[0] = maddr;
+		mcl->args[1] = *(unsigned long *)&desc;
+	} else {
+		mcl->args[0] = maddr;
+		mcl->args[1] = maddr >> 32;
+		mcl->args[2] = desc.a;
+		mcl->args[3] = desc.b;
+	}
+}
+
+static inline void
+MULTI_memory_op(struct multicall_entry *mcl, unsigned int cmd, void *arg)
+{
+	mcl->op = __HYPERVISOR_memory_op;
+	mcl->args[0] = cmd;
+	mcl->args[1] = (unsigned long)arg;
+}
+
+static inline void
+MULTI_mmu_update(struct multicall_entry *mcl, struct mmu_update *req,
+		 int count, int *success_count, domid_t domid)
+{
+	mcl->op = __HYPERVISOR_mmu_update;
+	mcl->args[0] = (unsigned long)req;
+	mcl->args[1] = count;
+	mcl->args[2] = (unsigned long)success_count;
+	mcl->args[3] = domid;
+}
+
+static inline void
+MULTI_mmuext_op(struct multicall_entry *mcl, struct mmuext_op *op, int count,
+		int *success_count, domid_t domid)
+{
+	mcl->op = __HYPERVISOR_mmuext_op;
+	mcl->args[0] = (unsigned long)op;
+	mcl->args[1] = count;
+	mcl->args[2] = (unsigned long)success_count;
+	mcl->args[3] = domid;
+}
+
+static inline void
+MULTI_set_gdt(struct multicall_entry *mcl, unsigned long *frames, int entries)
+{
+	mcl->op = __HYPERVISOR_set_gdt;
+	mcl->args[0] = (unsigned long)frames;
+	mcl->args[1] = entries;
+}
+
+static inline void
+MULTI_stack_switch(struct multicall_entry *mcl,
+		   unsigned long ss, unsigned long esp)
+{
+	mcl->op = __HYPERVISOR_stack_switch;
+	mcl->args[0] = ss;
+	mcl->args[1] = esp;
+}
+
+#endif /* _ASM_X86_XEN_HYPERCALL_H */
diff --git a/arch/x86/include/asm/xen/hypervisor.h b/arch/x86/include/asm/xen/hypervisor.h
new file mode 100644
index 0000000..a38d25a
--- /dev/null
+++ b/arch/x86/include/asm/xen/hypervisor.h
@@ -0,0 +1,82 @@
+/******************************************************************************
+ * hypervisor.h
+ *
+ * Linux-specific hypervisor handling.
+ *
+ * Copyright (c) 2002-2004, K A Fraser
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _ASM_X86_XEN_HYPERVISOR_H
+#define _ASM_X86_XEN_HYPERVISOR_H
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/version.h>
+
+#include <asm/ptrace.h>
+#include <asm/page.h>
+#include <asm/desc.h>
+#if defined(__i386__)
+#  ifdef CONFIG_X86_PAE
+#   include <asm-generic/pgtable-nopud.h>
+#  else
+#   include <asm-generic/pgtable-nopmd.h>
+#  endif
+#endif
+#include <asm/xen/hypercall.h>
+
+/* arch/i386/kernel/setup.c */
+extern struct shared_info *HYPERVISOR_shared_info;
+extern struct start_info *xen_start_info;
+
+/* arch/i386/mach-xen/evtchn.c */
+/* Force a proper event-channel callback from Xen. */
+extern void force_evtchn_callback(void);
+
+/* Turn jiffies into Xen system time. */
+u64 jiffies_to_st(unsigned long jiffies);
+
+
+#define MULTI_UVMFLAGS_INDEX 3
+#define MULTI_UVMDOMID_INDEX 4
+
+enum xen_domain_type {
+	XEN_NATIVE,
+	XEN_PV_DOMAIN,
+	XEN_HVM_DOMAIN,
+};
+
+extern enum xen_domain_type xen_domain_type;
+
+#define xen_domain()		(xen_domain_type != XEN_NATIVE)
+#define xen_pv_domain()		(xen_domain_type == XEN_PV_DOMAIN)
+#define xen_initial_domain()	(xen_pv_domain() && xen_start_info->flags & SIF_INITDOMAIN)
+#define xen_hvm_domain()	(xen_domain_type == XEN_HVM_DOMAIN)
+
+#endif /* _ASM_X86_XEN_HYPERVISOR_H */
diff --git a/arch/x86/include/asm/xen/interface.h b/arch/x86/include/asm/xen/interface.h
new file mode 100644
index 0000000..e8506c1
--- /dev/null
+++ b/arch/x86/include/asm/xen/interface.h
@@ -0,0 +1,175 @@
+/******************************************************************************
+ * arch-x86_32.h
+ *
+ * Guest OS interface to x86 Xen.
+ *
+ * Copyright (c) 2004, K A Fraser
+ */
+
+#ifndef _ASM_X86_XEN_INTERFACE_H
+#define _ASM_X86_XEN_INTERFACE_H
+
+#ifdef __XEN__
+#define __DEFINE_GUEST_HANDLE(name, type) \
+    typedef struct { type *p; } __guest_handle_ ## name
+#else
+#define __DEFINE_GUEST_HANDLE(name, type) \
+    typedef type * __guest_handle_ ## name
+#endif
+
+#define DEFINE_GUEST_HANDLE_STRUCT(name) \
+	__DEFINE_GUEST_HANDLE(name, struct name)
+#define DEFINE_GUEST_HANDLE(name) __DEFINE_GUEST_HANDLE(name, name)
+#define GUEST_HANDLE(name)        __guest_handle_ ## name
+
+#ifdef __XEN__
+#if defined(__i386__)
+#define set_xen_guest_handle(hnd, val)			\
+	do {						\
+		if (sizeof(hnd) == 8)			\
+			*(uint64_t *)&(hnd) = 0;	\
+		(hnd).p = val;				\
+	} while (0)
+#elif defined(__x86_64__)
+#define set_xen_guest_handle(hnd, val)	do { (hnd).p = val; } while (0)
+#endif
+#else
+#if defined(__i386__)
+#define set_xen_guest_handle(hnd, val)			\
+	do {						\
+		if (sizeof(hnd) == 8)			\
+			*(uint64_t *)&(hnd) = 0;	\
+		(hnd) = val;				\
+	} while (0)
+#elif defined(__x86_64__)
+#define set_xen_guest_handle(hnd, val)	do { (hnd) = val; } while (0)
+#endif
+#endif
+
+#ifndef __ASSEMBLY__
+/* Guest handles for primitive C types. */
+__DEFINE_GUEST_HANDLE(uchar, unsigned char);
+__DEFINE_GUEST_HANDLE(uint,  unsigned int);
+__DEFINE_GUEST_HANDLE(ulong, unsigned long);
+DEFINE_GUEST_HANDLE(char);
+DEFINE_GUEST_HANDLE(int);
+DEFINE_GUEST_HANDLE(long);
+DEFINE_GUEST_HANDLE(void);
+#endif
+
+#ifndef HYPERVISOR_VIRT_START
+#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
+#endif
+
+#ifndef machine_to_phys_mapping
+#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
+#endif
+
+/* Maximum number of virtual CPUs in multi-processor guests. */
+#define MAX_VIRT_CPUS 32
+
+/*
+ * SEGMENT DESCRIPTOR TABLES
+ */
+/*
+ * A number of GDT entries are reserved by Xen. These are not situated at the
+ * start of the GDT because some stupid OSes export hard-coded selector values
+ * in their ABI. These hard-coded values are always near the start of the GDT,
+ * so Xen places itself out of the way, at the far end of the GDT.
+ */
+#define FIRST_RESERVED_GDT_PAGE  14
+#define FIRST_RESERVED_GDT_BYTE  (FIRST_RESERVED_GDT_PAGE * 4096)
+#define FIRST_RESERVED_GDT_ENTRY (FIRST_RESERVED_GDT_BYTE / 8)
+
+/*
+ * Send an array of these to HYPERVISOR_set_trap_table()
+ * The privilege level specifies which modes may enter a trap via a software
+ * interrupt. On x86/64, since rings 1 and 2 are unavailable, we allocate
+ * privilege levels as follows:
+ *  Level == 0: Noone may enter
+ *  Level == 1: Kernel may enter
+ *  Level == 2: Kernel may enter
+ *  Level == 3: Everyone may enter
+ */
+#define TI_GET_DPL(_ti)		((_ti)->flags & 3)
+#define TI_GET_IF(_ti)		((_ti)->flags & 4)
+#define TI_SET_DPL(_ti, _dpl)	((_ti)->flags |= (_dpl))
+#define TI_SET_IF(_ti, _if)	((_ti)->flags |= ((!!(_if))<<2))
+
+#ifndef __ASSEMBLY__
+struct trap_info {
+    uint8_t       vector;  /* exception vector                              */
+    uint8_t       flags;   /* 0-3: privilege level; 4: clear event enable?  */
+    uint16_t      cs;      /* code selector                                 */
+    unsigned long address; /* code offset                                   */
+};
+DEFINE_GUEST_HANDLE_STRUCT(trap_info);
+
+struct arch_shared_info {
+    unsigned long max_pfn;                  /* max pfn that appears in table */
+    /* Frame containing list of mfns containing list of mfns containing p2m. */
+    unsigned long pfn_to_mfn_frame_list_list;
+    unsigned long nmi_reason;
+};
+#endif	/* !__ASSEMBLY__ */
+
+#ifdef CONFIG_X86_32
+#include "interface_32.h"
+#else
+#include "interface_64.h"
+#endif
+
+#ifndef __ASSEMBLY__
+/*
+ * The following is all CPU context. Note that the fpu_ctxt block is filled
+ * in by FXSAVE if the CPU has feature FXSR; otherwise FSAVE is used.
+ */
+struct vcpu_guest_context {
+    /* FPU registers come first so they can be aligned for FXSAVE/FXRSTOR. */
+    struct { char x[512]; } fpu_ctxt;       /* User-level FPU registers     */
+#define VGCF_I387_VALID (1<<0)
+#define VGCF_HVM_GUEST  (1<<1)
+#define VGCF_IN_KERNEL  (1<<2)
+    unsigned long flags;                    /* VGCF_* flags                 */
+    struct cpu_user_regs user_regs;         /* User-level CPU registers     */
+    struct trap_info trap_ctxt[256];        /* Virtual IDT                  */
+    unsigned long ldt_base, ldt_ents;       /* LDT (linear address, # ents) */
+    unsigned long gdt_frames[16], gdt_ents; /* GDT (machine frames, # ents) */
+    unsigned long kernel_ss, kernel_sp;     /* Virtual TSS (only SS1/SP1)   */
+    /* NB. User pagetable on x86/64 is placed in ctrlreg[1]. */
+    unsigned long ctrlreg[8];               /* CR0-CR7 (control registers)  */
+    unsigned long debugreg[8];              /* DB0-DB7 (debug registers)    */
+#ifdef __i386__
+    unsigned long event_callback_cs;        /* CS:EIP of event callback     */
+    unsigned long event_callback_eip;
+    unsigned long failsafe_callback_cs;     /* CS:EIP of failsafe callback  */
+    unsigned long failsafe_callback_eip;
+#else
+    unsigned long event_callback_eip;
+    unsigned long failsafe_callback_eip;
+    unsigned long syscall_callback_eip;
+#endif
+    unsigned long vm_assist;                /* VMASST_TYPE_* bitmap */
+#ifdef __x86_64__
+    /* Segment base addresses. */
+    uint64_t      fs_base;
+    uint64_t      gs_base_kernel;
+    uint64_t      gs_base_user;
+#endif
+};
+DEFINE_GUEST_HANDLE_STRUCT(vcpu_guest_context);
+#endif	/* !__ASSEMBLY__ */
+
+/*
+ * Prefix forces emulation of some non-trapping instructions.
+ * Currently only CPUID.
+ */
+#ifdef __ASSEMBLY__
+#define XEN_EMULATE_PREFIX .byte 0x0f,0x0b,0x78,0x65,0x6e ;
+#define XEN_CPUID          XEN_EMULATE_PREFIX cpuid
+#else
+#define XEN_EMULATE_PREFIX ".byte 0x0f,0x0b,0x78,0x65,0x6e ; "
+#define XEN_CPUID          XEN_EMULATE_PREFIX "cpuid"
+#endif
+
+#endif /* _ASM_X86_XEN_INTERFACE_H */
diff --git a/arch/x86/include/asm/xen/interface_32.h b/arch/x86/include/asm/xen/interface_32.h
new file mode 100644
index 0000000..42a7e00
--- /dev/null
+++ b/arch/x86/include/asm/xen/interface_32.h
@@ -0,0 +1,97 @@
+/******************************************************************************
+ * arch-x86_32.h
+ *
+ * Guest OS interface to x86 32-bit Xen.
+ *
+ * Copyright (c) 2004, K A Fraser
+ */
+
+#ifndef _ASM_X86_XEN_INTERFACE_32_H
+#define _ASM_X86_XEN_INTERFACE_32_H
+
+
+/*
+ * These flat segments are in the Xen-private section of every GDT. Since these
+ * are also present in the initial GDT, many OSes will be able to avoid
+ * installing their own GDT.
+ */
+#define FLAT_RING1_CS 0xe019    /* GDT index 259 */
+#define FLAT_RING1_DS 0xe021    /* GDT index 260 */
+#define FLAT_RING1_SS 0xe021    /* GDT index 260 */
+#define FLAT_RING3_CS 0xe02b    /* GDT index 261 */
+#define FLAT_RING3_DS 0xe033    /* GDT index 262 */
+#define FLAT_RING3_SS 0xe033    /* GDT index 262 */
+
+#define FLAT_KERNEL_CS FLAT_RING1_CS
+#define FLAT_KERNEL_DS FLAT_RING1_DS
+#define FLAT_KERNEL_SS FLAT_RING1_SS
+#define FLAT_USER_CS    FLAT_RING3_CS
+#define FLAT_USER_DS    FLAT_RING3_DS
+#define FLAT_USER_SS    FLAT_RING3_SS
+
+/* And the trap vector is... */
+#define TRAP_INSTR "int $0x82"
+
+/*
+ * Virtual addresses beyond this are not modifiable by guest OSes. The
+ * machine->physical mapping table starts at this address, read-only.
+ */
+#define __HYPERVISOR_VIRT_START 0xF5800000
+
+#ifndef __ASSEMBLY__
+
+struct cpu_user_regs {
+    uint32_t ebx;
+    uint32_t ecx;
+    uint32_t edx;
+    uint32_t esi;
+    uint32_t edi;
+    uint32_t ebp;
+    uint32_t eax;
+    uint16_t error_code;    /* private */
+    uint16_t entry_vector;  /* private */
+    uint32_t eip;
+    uint16_t cs;
+    uint8_t  saved_upcall_mask;
+    uint8_t  _pad0;
+    uint32_t eflags;        /* eflags.IF == !saved_upcall_mask */
+    uint32_t esp;
+    uint16_t ss, _pad1;
+    uint16_t es, _pad2;
+    uint16_t ds, _pad3;
+    uint16_t fs, _pad4;
+    uint16_t gs, _pad5;
+};
+DEFINE_GUEST_HANDLE_STRUCT(cpu_user_regs);
+
+typedef uint64_t tsc_timestamp_t; /* RDTSC timestamp */
+
+struct arch_vcpu_info {
+    unsigned long cr2;
+    unsigned long pad[5]; /* sizeof(struct vcpu_info) == 64 */
+};
+
+struct xen_callback {
+	unsigned long cs;
+	unsigned long eip;
+};
+typedef struct xen_callback xen_callback_t;
+
+#define XEN_CALLBACK(__cs, __eip)				\
+	((struct xen_callback){ .cs = (__cs), .eip = (unsigned long)(__eip) })
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * Page-directory addresses above 4GB do not fit into architectural %cr3.
+ * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
+ * must use the following accessor macros to pack/unpack valid MFNs.
+ *
+ * Note that Xen is using the fact that the pagetable base is always
+ * page-aligned, and putting the 12 MSB of the address into the 12 LSB
+ * of cr3.
+ */
+#define xen_pfn_to_cr3(pfn) (((unsigned)(pfn) << 12) | ((unsigned)(pfn) >> 20))
+#define xen_cr3_to_pfn(cr3) (((unsigned)(cr3) >> 12) | ((unsigned)(cr3) << 20))
+
+#endif /* _ASM_X86_XEN_INTERFACE_32_H */
diff --git a/arch/x86/include/asm/xen/interface_64.h b/arch/x86/include/asm/xen/interface_64.h
new file mode 100644
index 0000000..100d266
--- /dev/null
+++ b/arch/x86/include/asm/xen/interface_64.h
@@ -0,0 +1,159 @@
+#ifndef _ASM_X86_XEN_INTERFACE_64_H
+#define _ASM_X86_XEN_INTERFACE_64_H
+
+/*
+ * 64-bit segment selectors
+ * These flat segments are in the Xen-private section of every GDT. Since these
+ * are also present in the initial GDT, many OSes will be able to avoid
+ * installing their own GDT.
+ */
+
+#define FLAT_RING3_CS32 0xe023  /* GDT index 260 */
+#define FLAT_RING3_CS64 0xe033  /* GDT index 261 */
+#define FLAT_RING3_DS32 0xe02b  /* GDT index 262 */
+#define FLAT_RING3_DS64 0x0000  /* NULL selector */
+#define FLAT_RING3_SS32 0xe02b  /* GDT index 262 */
+#define FLAT_RING3_SS64 0xe02b  /* GDT index 262 */
+
+#define FLAT_KERNEL_DS64 FLAT_RING3_DS64
+#define FLAT_KERNEL_DS32 FLAT_RING3_DS32
+#define FLAT_KERNEL_DS   FLAT_KERNEL_DS64
+#define FLAT_KERNEL_CS64 FLAT_RING3_CS64
+#define FLAT_KERNEL_CS32 FLAT_RING3_CS32
+#define FLAT_KERNEL_CS   FLAT_KERNEL_CS64
+#define FLAT_KERNEL_SS64 FLAT_RING3_SS64
+#define FLAT_KERNEL_SS32 FLAT_RING3_SS32
+#define FLAT_KERNEL_SS   FLAT_KERNEL_SS64
+
+#define FLAT_USER_DS64 FLAT_RING3_DS64
+#define FLAT_USER_DS32 FLAT_RING3_DS32
+#define FLAT_USER_DS   FLAT_USER_DS64
+#define FLAT_USER_CS64 FLAT_RING3_CS64
+#define FLAT_USER_CS32 FLAT_RING3_CS32
+#define FLAT_USER_CS   FLAT_USER_CS64
+#define FLAT_USER_SS64 FLAT_RING3_SS64
+#define FLAT_USER_SS32 FLAT_RING3_SS32
+#define FLAT_USER_SS   FLAT_USER_SS64
+
+#define __HYPERVISOR_VIRT_START 0xFFFF800000000000
+#define __HYPERVISOR_VIRT_END   0xFFFF880000000000
+#define __MACH2PHYS_VIRT_START  0xFFFF800000000000
+#define __MACH2PHYS_VIRT_END    0xFFFF804000000000
+
+#ifndef HYPERVISOR_VIRT_START
+#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
+#define HYPERVISOR_VIRT_END   mk_unsigned_long(__HYPERVISOR_VIRT_END)
+#endif
+
+#define MACH2PHYS_VIRT_START  mk_unsigned_long(__MACH2PHYS_VIRT_START)
+#define MACH2PHYS_VIRT_END    mk_unsigned_long(__MACH2PHYS_VIRT_END)
+#define MACH2PHYS_NR_ENTRIES  ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>3)
+#ifndef machine_to_phys_mapping
+#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
+#endif
+
+/*
+ * int HYPERVISOR_set_segment_base(unsigned int which, unsigned long base)
+ *  @which == SEGBASE_*  ;  @base == 64-bit base address
+ * Returns 0 on success.
+ */
+#define SEGBASE_FS          0
+#define SEGBASE_GS_USER     1
+#define SEGBASE_GS_KERNEL   2
+#define SEGBASE_GS_USER_SEL 3 /* Set user %gs specified in base[15:0] */
+
+/*
+ * int HYPERVISOR_iret(void)
+ * All arguments are on the kernel stack, in the following format.
+ * Never returns if successful. Current kernel context is lost.
+ * The saved CS is mapped as follows:
+ *   RING0 -> RING3 kernel mode.
+ *   RING1 -> RING3 kernel mode.
+ *   RING2 -> RING3 kernel mode.
+ *   RING3 -> RING3 user mode.
+ * However RING0 indicates that the guest kernel should return to iteself
+ * directly with
+ *      orb   $3,1*8(%rsp)
+ *      iretq
+ * If flags contains VGCF_in_syscall:
+ *   Restore RAX, RIP, RFLAGS, RSP.
+ *   Discard R11, RCX, CS, SS.
+ * Otherwise:
+ *   Restore RAX, R11, RCX, CS:RIP, RFLAGS, SS:RSP.
+ * All other registers are saved on hypercall entry and restored to user.
+ */
+/* Guest exited in SYSCALL context? Return to guest with SYSRET? */
+#define _VGCF_in_syscall 8
+#define VGCF_in_syscall  (1<<_VGCF_in_syscall)
+#define VGCF_IN_SYSCALL  VGCF_in_syscall
+
+#ifndef __ASSEMBLY__
+
+struct iret_context {
+    /* Top of stack (%rsp at point of hypercall). */
+    uint64_t rax, r11, rcx, flags, rip, cs, rflags, rsp, ss;
+    /* Bottom of iret stack frame. */
+};
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+/* Anonymous union includes both 32- and 64-bit names (e.g., eax/rax). */
+#define __DECL_REG(name) union { \
+    uint64_t r ## name, e ## name; \
+    uint32_t _e ## name; \
+}
+#else
+/* Non-gcc sources must always use the proper 64-bit name (e.g., rax). */
+#define __DECL_REG(name) uint64_t r ## name
+#endif
+
+struct cpu_user_regs {
+    uint64_t r15;
+    uint64_t r14;
+    uint64_t r13;
+    uint64_t r12;
+    __DECL_REG(bp);
+    __DECL_REG(bx);
+    uint64_t r11;
+    uint64_t r10;
+    uint64_t r9;
+    uint64_t r8;
+    __DECL_REG(ax);
+    __DECL_REG(cx);
+    __DECL_REG(dx);
+    __DECL_REG(si);
+    __DECL_REG(di);
+    uint32_t error_code;    /* private */
+    uint32_t entry_vector;  /* private */
+    __DECL_REG(ip);
+    uint16_t cs, _pad0[1];
+    uint8_t  saved_upcall_mask;
+    uint8_t  _pad1[3];
+    __DECL_REG(flags);      /* rflags.IF == !saved_upcall_mask */
+    __DECL_REG(sp);
+    uint16_t ss, _pad2[3];
+    uint16_t es, _pad3[3];
+    uint16_t ds, _pad4[3];
+    uint16_t fs, _pad5[3]; /* Non-zero => takes precedence over fs_base.     */
+    uint16_t gs, _pad6[3]; /* Non-zero => takes precedence over gs_base_usr. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(cpu_user_regs);
+
+#undef __DECL_REG
+
+#define xen_pfn_to_cr3(pfn) ((unsigned long)(pfn) << 12)
+#define xen_cr3_to_pfn(cr3) ((unsigned long)(cr3) >> 12)
+
+struct arch_vcpu_info {
+    unsigned long cr2;
+    unsigned long pad; /* sizeof(vcpu_info_t) == 64 */
+};
+
+typedef unsigned long xen_callback_t;
+
+#define XEN_CALLBACK(__cs, __rip)				\
+	((unsigned long)(__rip))
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* _ASM_X86_XEN_INTERFACE_64_H */
diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
new file mode 100644
index 0000000..bc62899
--- /dev/null
+++ b/arch/x86/include/asm/xen/page.h
@@ -0,0 +1,165 @@
+#ifndef _ASM_X86_XEN_PAGE_H
+#define _ASM_X86_XEN_PAGE_H
+
+#include <linux/pfn.h>
+
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+
+#include <xen/features.h>
+
+/* Xen machine address */
+typedef struct xmaddr {
+	phys_addr_t maddr;
+} xmaddr_t;
+
+/* Xen pseudo-physical address */
+typedef struct xpaddr {
+	phys_addr_t paddr;
+} xpaddr_t;
+
+#define XMADDR(x)	((xmaddr_t) { .maddr = (x) })
+#define XPADDR(x)	((xpaddr_t) { .paddr = (x) })
+
+/**** MACHINE <-> PHYSICAL CONVERSION MACROS ****/
+#define INVALID_P2M_ENTRY	(~0UL)
+#define FOREIGN_FRAME_BIT	(1UL<<31)
+#define FOREIGN_FRAME(m)	((m) | FOREIGN_FRAME_BIT)
+
+/* Maximum amount of memory we can handle in a domain in pages */
+#define MAX_DOMAIN_PAGES						\
+    ((unsigned long)((u64)CONFIG_XEN_MAX_DOMAIN_MEMORY * 1024 * 1024 * 1024 / PAGE_SIZE))
+
+
+extern unsigned long get_phys_to_machine(unsigned long pfn);
+extern void set_phys_to_machine(unsigned long pfn, unsigned long mfn);
+
+static inline unsigned long pfn_to_mfn(unsigned long pfn)
+{
+	if (xen_feature(XENFEAT_auto_translated_physmap))
+		return pfn;
+
+	return get_phys_to_machine(pfn) & ~FOREIGN_FRAME_BIT;
+}
+
+static inline int phys_to_machine_mapping_valid(unsigned long pfn)
+{
+	if (xen_feature(XENFEAT_auto_translated_physmap))
+		return 1;
+
+	return get_phys_to_machine(pfn) != INVALID_P2M_ENTRY;
+}
+
+static inline unsigned long mfn_to_pfn(unsigned long mfn)
+{
+	unsigned long pfn;
+
+	if (xen_feature(XENFEAT_auto_translated_physmap))
+		return mfn;
+
+#if 0
+	if (unlikely((mfn >> machine_to_phys_order) != 0))
+		return max_mapnr;
+#endif
+
+	pfn = 0;
+	/*
+	 * The array access can fail (e.g., device space beyond end of RAM).
+	 * In such cases it doesn't matter what we return (we return garbage),
+	 * but we must handle the fault without crashing!
+	 */
+	__get_user(pfn, &machine_to_phys_mapping[mfn]);
+
+	return pfn;
+}
+
+static inline xmaddr_t phys_to_machine(xpaddr_t phys)
+{
+	unsigned offset = phys.paddr & ~PAGE_MASK;
+	return XMADDR(PFN_PHYS(pfn_to_mfn(PFN_DOWN(phys.paddr))) | offset);
+}
+
+static inline xpaddr_t machine_to_phys(xmaddr_t machine)
+{
+	unsigned offset = machine.maddr & ~PAGE_MASK;
+	return XPADDR(PFN_PHYS(mfn_to_pfn(PFN_DOWN(machine.maddr))) | offset);
+}
+
+/*
+ * We detect special mappings in one of two ways:
+ *  1. If the MFN is an I/O page then Xen will set the m2p entry
+ *     to be outside our maximum possible pseudophys range.
+ *  2. If the MFN belongs to a different domain then we will certainly
+ *     not have MFN in our p2m table. Conversely, if the page is ours,
+ *     then we'll have p2m(m2p(MFN))==MFN.
+ * If we detect a special mapping then it doesn't have a 'struct page'.
+ * We force !pfn_valid() by returning an out-of-range pointer.
+ *
+ * NB. These checks require that, for any MFN that is not in our reservation,
+ * there is no PFN such that p2m(PFN) == MFN. Otherwise we can get confused if
+ * we are foreign-mapping the MFN, and the other domain as m2p(MFN) == PFN.
+ * Yikes! Various places must poke in INVALID_P2M_ENTRY for safety.
+ *
+ * NB2. When deliberately mapping foreign pages into the p2m table, you *must*
+ *      use FOREIGN_FRAME(). This will cause pte_pfn() to choke on it, as we
+ *      require. In all the cases we care about, the FOREIGN_FRAME bit is
+ *      masked (e.g., pfn_to_mfn()) so behaviour there is correct.
+ */
+static inline unsigned long mfn_to_local_pfn(unsigned long mfn)
+{
+	extern unsigned long max_mapnr;
+	unsigned long pfn = mfn_to_pfn(mfn);
+	if ((pfn < max_mapnr)
+	    && !xen_feature(XENFEAT_auto_translated_physmap)
+	    && (get_phys_to_machine(pfn) != mfn))
+		return max_mapnr; /* force !pfn_valid() */
+	/* XXX fixme; not true with sparsemem */
+	return pfn;
+}
+
+/* VIRT <-> MACHINE conversion */
+#define virt_to_machine(v)	(phys_to_machine(XPADDR(__pa(v))))
+#define virt_to_mfn(v)		(pfn_to_mfn(PFN_DOWN(__pa(v))))
+#define mfn_to_virt(m)		(__va(mfn_to_pfn(m) << PAGE_SHIFT))
+
+static inline unsigned long pte_mfn(pte_t pte)
+{
+	return (pte.pte & PTE_PFN_MASK) >> PAGE_SHIFT;
+}
+
+static inline pte_t mfn_pte(unsigned long page_nr, pgprot_t pgprot)
+{
+	pte_t pte;
+
+	pte.pte = ((phys_addr_t)page_nr << PAGE_SHIFT) |
+		(pgprot_val(pgprot) & __supported_pte_mask);
+
+	return pte;
+}
+
+static inline pteval_t pte_val_ma(pte_t pte)
+{
+	return pte.pte;
+}
+
+static inline pte_t __pte_ma(pteval_t x)
+{
+	return (pte_t) { .pte = x };
+}
+
+#define pmd_val_ma(v) ((v).pmd)
+#ifdef __PAGETABLE_PUD_FOLDED
+#define pud_val_ma(v) ((v).pgd.pgd)
+#else
+#define pud_val_ma(v) ((v).pud)
+#endif
+#define __pmd_ma(x)	((pmd_t) { (x) } )
+
+#define pgd_val_ma(x)	((x).pgd)
+
+
+xmaddr_t arbitrary_virt_to_machine(void *address);
+void make_lowmem_page_readonly(void *vaddr);
+void make_lowmem_page_readwrite(void *vaddr);
+
+#endif /* _ASM_X86_XEN_PAGE_H */
diff --git a/include/asm-x86/xor.h b/arch/x86/include/asm/xor.h
similarity index 100%
rename from include/asm-x86/xor.h
rename to arch/x86/include/asm/xor.h
diff --git a/arch/x86/include/asm/xor_32.h b/arch/x86/include/asm/xor_32.h
new file mode 100644
index 0000000..133b40a
--- /dev/null
+++ b/arch/x86/include/asm/xor_32.h
@@ -0,0 +1,888 @@
+#ifndef _ASM_X86_XOR_32_H
+#define _ASM_X86_XOR_32_H
+
+/*
+ * Optimized RAID-5 checksumming functions for MMX and SSE.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * High-speed RAID5 checksumming functions utilizing MMX instructions.
+ * Copyright (C) 1998 Ingo Molnar.
+ */
+
+#define LD(x, y)	"       movq   8*("#x")(%1), %%mm"#y"   ;\n"
+#define ST(x, y)	"       movq %%mm"#y",   8*("#x")(%1)   ;\n"
+#define XO1(x, y)	"       pxor   8*("#x")(%2), %%mm"#y"   ;\n"
+#define XO2(x, y)	"       pxor   8*("#x")(%3), %%mm"#y"   ;\n"
+#define XO3(x, y)	"       pxor   8*("#x")(%4), %%mm"#y"   ;\n"
+#define XO4(x, y)	"       pxor   8*("#x")(%5), %%mm"#y"   ;\n"
+
+#include <asm/i387.h>
+
+static void
+xor_pII_mmx_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	unsigned long lines = bytes >> 7;
+
+	kernel_fpu_begin();
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i)				\
+	LD(i, 0)				\
+		LD(i + 1, 1)			\
+			LD(i + 2, 2)		\
+				LD(i + 3, 3)	\
+	XO1(i, 0)				\
+	ST(i, 0)				\
+		XO1(i+1, 1)			\
+		ST(i+1, 1)			\
+			XO1(i + 2, 2)		\
+			ST(i + 2, 2)		\
+				XO1(i + 3, 3)	\
+				ST(i + 3, 3)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+	BLOCK(0)
+	BLOCK(4)
+	BLOCK(8)
+	BLOCK(12)
+
+	"       addl $128, %1         ;\n"
+	"       addl $128, %2         ;\n"
+	"       decl %0               ;\n"
+	"       jnz 1b                ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2)
+	:
+	: "memory");
+
+	kernel_fpu_end();
+}
+
+static void
+xor_pII_mmx_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	      unsigned long *p3)
+{
+	unsigned long lines = bytes >> 7;
+
+	kernel_fpu_begin();
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i)				\
+	LD(i, 0)				\
+		LD(i + 1, 1)			\
+			LD(i + 2, 2)		\
+				LD(i + 3, 3)	\
+	XO1(i, 0)				\
+		XO1(i + 1, 1)			\
+			XO1(i + 2, 2)		\
+				XO1(i + 3, 3)	\
+	XO2(i, 0)				\
+	ST(i, 0)				\
+		XO2(i + 1, 1)			\
+		ST(i + 1, 1)			\
+			XO2(i + 2, 2)		\
+			ST(i + 2, 2)		\
+				XO2(i + 3, 3)	\
+				ST(i + 3, 3)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+	BLOCK(0)
+	BLOCK(4)
+	BLOCK(8)
+	BLOCK(12)
+
+	"       addl $128, %1         ;\n"
+	"       addl $128, %2         ;\n"
+	"       addl $128, %3         ;\n"
+	"       decl %0               ;\n"
+	"       jnz 1b                ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3)
+	:
+	: "memory");
+
+	kernel_fpu_end();
+}
+
+static void
+xor_pII_mmx_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	      unsigned long *p3, unsigned long *p4)
+{
+	unsigned long lines = bytes >> 7;
+
+	kernel_fpu_begin();
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i)				\
+	LD(i, 0)				\
+		LD(i + 1, 1)			\
+			LD(i + 2, 2)		\
+				LD(i + 3, 3)	\
+	XO1(i, 0)				\
+		XO1(i + 1, 1)			\
+			XO1(i + 2, 2)		\
+				XO1(i + 3, 3)	\
+	XO2(i, 0)				\
+		XO2(i + 1, 1)			\
+			XO2(i + 2, 2)		\
+				XO2(i + 3, 3)	\
+	XO3(i, 0)				\
+	ST(i, 0)				\
+		XO3(i + 1, 1)			\
+		ST(i + 1, 1)			\
+			XO3(i + 2, 2)		\
+			ST(i + 2, 2)		\
+				XO3(i + 3, 3)	\
+				ST(i + 3, 3)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+	BLOCK(0)
+	BLOCK(4)
+	BLOCK(8)
+	BLOCK(12)
+
+	"       addl $128, %1         ;\n"
+	"       addl $128, %2         ;\n"
+	"       addl $128, %3         ;\n"
+	"       addl $128, %4         ;\n"
+	"       decl %0               ;\n"
+	"       jnz 1b                ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
+	:
+	: "memory");
+
+	kernel_fpu_end();
+}
+
+
+static void
+xor_pII_mmx_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	      unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	unsigned long lines = bytes >> 7;
+
+	kernel_fpu_begin();
+
+	/* Make sure GCC forgets anything it knows about p4 or p5,
+	   such that it won't pass to the asm volatile below a
+	   register that is shared with any other variable.  That's
+	   because we modify p4 and p5 there, but we can't mark them
+	   as read/write, otherwise we'd overflow the 10-asm-operands
+	   limit of GCC < 3.1.  */
+	asm("" : "+r" (p4), "+r" (p5));
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i)				\
+	LD(i, 0)				\
+		LD(i + 1, 1)			\
+			LD(i + 2, 2)		\
+				LD(i + 3, 3)	\
+	XO1(i, 0)				\
+		XO1(i + 1, 1)			\
+			XO1(i + 2, 2)		\
+				XO1(i + 3, 3)	\
+	XO2(i, 0)				\
+		XO2(i + 1, 1)			\
+			XO2(i + 2, 2)		\
+				XO2(i + 3, 3)	\
+	XO3(i, 0)				\
+		XO3(i + 1, 1)			\
+			XO3(i + 2, 2)		\
+				XO3(i + 3, 3)	\
+	XO4(i, 0)				\
+	ST(i, 0)				\
+		XO4(i + 1, 1)			\
+		ST(i + 1, 1)			\
+			XO4(i + 2, 2)		\
+			ST(i + 2, 2)		\
+				XO4(i + 3, 3)	\
+				ST(i + 3, 3)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+	BLOCK(0)
+	BLOCK(4)
+	BLOCK(8)
+	BLOCK(12)
+
+	"       addl $128, %1         ;\n"
+	"       addl $128, %2         ;\n"
+	"       addl $128, %3         ;\n"
+	"       addl $128, %4         ;\n"
+	"       addl $128, %5         ;\n"
+	"       decl %0               ;\n"
+	"       jnz 1b                ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3)
+	: "r" (p4), "r" (p5)
+	: "memory");
+
+	/* p4 and p5 were modified, and now the variables are dead.
+	   Clobber them just to be sure nobody does something stupid
+	   like assuming they have some legal value.  */
+	asm("" : "=r" (p4), "=r" (p5));
+
+	kernel_fpu_end();
+}
+
+#undef LD
+#undef XO1
+#undef XO2
+#undef XO3
+#undef XO4
+#undef ST
+#undef BLOCK
+
+static void
+xor_p5_mmx_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	unsigned long lines = bytes >> 6;
+
+	kernel_fpu_begin();
+
+	asm volatile(
+	" .align 32	             ;\n"
+	" 1:                         ;\n"
+	"       movq   (%1), %%mm0   ;\n"
+	"       movq  8(%1), %%mm1   ;\n"
+	"       pxor   (%2), %%mm0   ;\n"
+	"       movq 16(%1), %%mm2   ;\n"
+	"       movq %%mm0,   (%1)   ;\n"
+	"       pxor  8(%2), %%mm1   ;\n"
+	"       movq 24(%1), %%mm3   ;\n"
+	"       movq %%mm1,  8(%1)   ;\n"
+	"       pxor 16(%2), %%mm2   ;\n"
+	"       movq 32(%1), %%mm4   ;\n"
+	"       movq %%mm2, 16(%1)   ;\n"
+	"       pxor 24(%2), %%mm3   ;\n"
+	"       movq 40(%1), %%mm5   ;\n"
+	"       movq %%mm3, 24(%1)   ;\n"
+	"       pxor 32(%2), %%mm4   ;\n"
+	"       movq 48(%1), %%mm6   ;\n"
+	"       movq %%mm4, 32(%1)   ;\n"
+	"       pxor 40(%2), %%mm5   ;\n"
+	"       movq 56(%1), %%mm7   ;\n"
+	"       movq %%mm5, 40(%1)   ;\n"
+	"       pxor 48(%2), %%mm6   ;\n"
+	"       pxor 56(%2), %%mm7   ;\n"
+	"       movq %%mm6, 48(%1)   ;\n"
+	"       movq %%mm7, 56(%1)   ;\n"
+
+	"       addl $64, %1         ;\n"
+	"       addl $64, %2         ;\n"
+	"       decl %0              ;\n"
+	"       jnz 1b               ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2)
+	:
+	: "memory");
+
+	kernel_fpu_end();
+}
+
+static void
+xor_p5_mmx_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	     unsigned long *p3)
+{
+	unsigned long lines = bytes >> 6;
+
+	kernel_fpu_begin();
+
+	asm volatile(
+	" .align 32,0x90             ;\n"
+	" 1:                         ;\n"
+	"       movq   (%1), %%mm0   ;\n"
+	"       movq  8(%1), %%mm1   ;\n"
+	"       pxor   (%2), %%mm0   ;\n"
+	"       movq 16(%1), %%mm2   ;\n"
+	"       pxor  8(%2), %%mm1   ;\n"
+	"       pxor   (%3), %%mm0   ;\n"
+	"       pxor 16(%2), %%mm2   ;\n"
+	"       movq %%mm0,   (%1)   ;\n"
+	"       pxor  8(%3), %%mm1   ;\n"
+	"       pxor 16(%3), %%mm2   ;\n"
+	"       movq 24(%1), %%mm3   ;\n"
+	"       movq %%mm1,  8(%1)   ;\n"
+	"       movq 32(%1), %%mm4   ;\n"
+	"       movq 40(%1), %%mm5   ;\n"
+	"       pxor 24(%2), %%mm3   ;\n"
+	"       movq %%mm2, 16(%1)   ;\n"
+	"       pxor 32(%2), %%mm4   ;\n"
+	"       pxor 24(%3), %%mm3   ;\n"
+	"       pxor 40(%2), %%mm5   ;\n"
+	"       movq %%mm3, 24(%1)   ;\n"
+	"       pxor 32(%3), %%mm4   ;\n"
+	"       pxor 40(%3), %%mm5   ;\n"
+	"       movq 48(%1), %%mm6   ;\n"
+	"       movq %%mm4, 32(%1)   ;\n"
+	"       movq 56(%1), %%mm7   ;\n"
+	"       pxor 48(%2), %%mm6   ;\n"
+	"       movq %%mm5, 40(%1)   ;\n"
+	"       pxor 56(%2), %%mm7   ;\n"
+	"       pxor 48(%3), %%mm6   ;\n"
+	"       pxor 56(%3), %%mm7   ;\n"
+	"       movq %%mm6, 48(%1)   ;\n"
+	"       movq %%mm7, 56(%1)   ;\n"
+
+	"       addl $64, %1         ;\n"
+	"       addl $64, %2         ;\n"
+	"       addl $64, %3         ;\n"
+	"       decl %0              ;\n"
+	"       jnz 1b               ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3)
+	:
+	: "memory" );
+
+	kernel_fpu_end();
+}
+
+static void
+xor_p5_mmx_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	     unsigned long *p3, unsigned long *p4)
+{
+	unsigned long lines = bytes >> 6;
+
+	kernel_fpu_begin();
+
+	asm volatile(
+	" .align 32,0x90             ;\n"
+	" 1:                         ;\n"
+	"       movq   (%1), %%mm0   ;\n"
+	"       movq  8(%1), %%mm1   ;\n"
+	"       pxor   (%2), %%mm0   ;\n"
+	"       movq 16(%1), %%mm2   ;\n"
+	"       pxor  8(%2), %%mm1   ;\n"
+	"       pxor   (%3), %%mm0   ;\n"
+	"       pxor 16(%2), %%mm2   ;\n"
+	"       pxor  8(%3), %%mm1   ;\n"
+	"       pxor   (%4), %%mm0   ;\n"
+	"       movq 24(%1), %%mm3   ;\n"
+	"       pxor 16(%3), %%mm2   ;\n"
+	"       pxor  8(%4), %%mm1   ;\n"
+	"       movq %%mm0,   (%1)   ;\n"
+	"       movq 32(%1), %%mm4   ;\n"
+	"       pxor 24(%2), %%mm3   ;\n"
+	"       pxor 16(%4), %%mm2   ;\n"
+	"       movq %%mm1,  8(%1)   ;\n"
+	"       movq 40(%1), %%mm5   ;\n"
+	"       pxor 32(%2), %%mm4   ;\n"
+	"       pxor 24(%3), %%mm3   ;\n"
+	"       movq %%mm2, 16(%1)   ;\n"
+	"       pxor 40(%2), %%mm5   ;\n"
+	"       pxor 32(%3), %%mm4   ;\n"
+	"       pxor 24(%4), %%mm3   ;\n"
+	"       movq %%mm3, 24(%1)   ;\n"
+	"       movq 56(%1), %%mm7   ;\n"
+	"       movq 48(%1), %%mm6   ;\n"
+	"       pxor 40(%3), %%mm5   ;\n"
+	"       pxor 32(%4), %%mm4   ;\n"
+	"       pxor 48(%2), %%mm6   ;\n"
+	"       movq %%mm4, 32(%1)   ;\n"
+	"       pxor 56(%2), %%mm7   ;\n"
+	"       pxor 40(%4), %%mm5   ;\n"
+	"       pxor 48(%3), %%mm6   ;\n"
+	"       pxor 56(%3), %%mm7   ;\n"
+	"       movq %%mm5, 40(%1)   ;\n"
+	"       pxor 48(%4), %%mm6   ;\n"
+	"       pxor 56(%4), %%mm7   ;\n"
+	"       movq %%mm6, 48(%1)   ;\n"
+	"       movq %%mm7, 56(%1)   ;\n"
+
+	"       addl $64, %1         ;\n"
+	"       addl $64, %2         ;\n"
+	"       addl $64, %3         ;\n"
+	"       addl $64, %4         ;\n"
+	"       decl %0              ;\n"
+	"       jnz 1b               ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
+	:
+	: "memory");
+
+	kernel_fpu_end();
+}
+
+static void
+xor_p5_mmx_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	     unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	unsigned long lines = bytes >> 6;
+
+	kernel_fpu_begin();
+
+	/* Make sure GCC forgets anything it knows about p4 or p5,
+	   such that it won't pass to the asm volatile below a
+	   register that is shared with any other variable.  That's
+	   because we modify p4 and p5 there, but we can't mark them
+	   as read/write, otherwise we'd overflow the 10-asm-operands
+	   limit of GCC < 3.1.  */
+	asm("" : "+r" (p4), "+r" (p5));
+
+	asm volatile(
+	" .align 32,0x90             ;\n"
+	" 1:                         ;\n"
+	"       movq   (%1), %%mm0   ;\n"
+	"       movq  8(%1), %%mm1   ;\n"
+	"       pxor   (%2), %%mm0   ;\n"
+	"       pxor  8(%2), %%mm1   ;\n"
+	"       movq 16(%1), %%mm2   ;\n"
+	"       pxor   (%3), %%mm0   ;\n"
+	"       pxor  8(%3), %%mm1   ;\n"
+	"       pxor 16(%2), %%mm2   ;\n"
+	"       pxor   (%4), %%mm0   ;\n"
+	"       pxor  8(%4), %%mm1   ;\n"
+	"       pxor 16(%3), %%mm2   ;\n"
+	"       movq 24(%1), %%mm3   ;\n"
+	"       pxor   (%5), %%mm0   ;\n"
+	"       pxor  8(%5), %%mm1   ;\n"
+	"       movq %%mm0,   (%1)   ;\n"
+	"       pxor 16(%4), %%mm2   ;\n"
+	"       pxor 24(%2), %%mm3   ;\n"
+	"       movq %%mm1,  8(%1)   ;\n"
+	"       pxor 16(%5), %%mm2   ;\n"
+	"       pxor 24(%3), %%mm3   ;\n"
+	"       movq 32(%1), %%mm4   ;\n"
+	"       movq %%mm2, 16(%1)   ;\n"
+	"       pxor 24(%4), %%mm3   ;\n"
+	"       pxor 32(%2), %%mm4   ;\n"
+	"       movq 40(%1), %%mm5   ;\n"
+	"       pxor 24(%5), %%mm3   ;\n"
+	"       pxor 32(%3), %%mm4   ;\n"
+	"       pxor 40(%2), %%mm5   ;\n"
+	"       movq %%mm3, 24(%1)   ;\n"
+	"       pxor 32(%4), %%mm4   ;\n"
+	"       pxor 40(%3), %%mm5   ;\n"
+	"       movq 48(%1), %%mm6   ;\n"
+	"       movq 56(%1), %%mm7   ;\n"
+	"       pxor 32(%5), %%mm4   ;\n"
+	"       pxor 40(%4), %%mm5   ;\n"
+	"       pxor 48(%2), %%mm6   ;\n"
+	"       pxor 56(%2), %%mm7   ;\n"
+	"       movq %%mm4, 32(%1)   ;\n"
+	"       pxor 48(%3), %%mm6   ;\n"
+	"       pxor 56(%3), %%mm7   ;\n"
+	"       pxor 40(%5), %%mm5   ;\n"
+	"       pxor 48(%4), %%mm6   ;\n"
+	"       pxor 56(%4), %%mm7   ;\n"
+	"       movq %%mm5, 40(%1)   ;\n"
+	"       pxor 48(%5), %%mm6   ;\n"
+	"       pxor 56(%5), %%mm7   ;\n"
+	"       movq %%mm6, 48(%1)   ;\n"
+	"       movq %%mm7, 56(%1)   ;\n"
+
+	"       addl $64, %1         ;\n"
+	"       addl $64, %2         ;\n"
+	"       addl $64, %3         ;\n"
+	"       addl $64, %4         ;\n"
+	"       addl $64, %5         ;\n"
+	"       decl %0              ;\n"
+	"       jnz 1b               ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3)
+	: "r" (p4), "r" (p5)
+	: "memory");
+
+	/* p4 and p5 were modified, and now the variables are dead.
+	   Clobber them just to be sure nobody does something stupid
+	   like assuming they have some legal value.  */
+	asm("" : "=r" (p4), "=r" (p5));
+
+	kernel_fpu_end();
+}
+
+static struct xor_block_template xor_block_pII_mmx = {
+	.name = "pII_mmx",
+	.do_2 = xor_pII_mmx_2,
+	.do_3 = xor_pII_mmx_3,
+	.do_4 = xor_pII_mmx_4,
+	.do_5 = xor_pII_mmx_5,
+};
+
+static struct xor_block_template xor_block_p5_mmx = {
+	.name = "p5_mmx",
+	.do_2 = xor_p5_mmx_2,
+	.do_3 = xor_p5_mmx_3,
+	.do_4 = xor_p5_mmx_4,
+	.do_5 = xor_p5_mmx_5,
+};
+
+/*
+ * Cache avoiding checksumming functions utilizing KNI instructions
+ * Copyright (C) 1999 Zach Brown (with obvious credit due Ingo)
+ */
+
+#define XMMS_SAVE				\
+do {						\
+	preempt_disable();			\
+	cr0 = read_cr0();			\
+	clts();					\
+	asm volatile(				\
+		"movups %%xmm0,(%0)	;\n\t"	\
+		"movups %%xmm1,0x10(%0)	;\n\t"	\
+		"movups %%xmm2,0x20(%0)	;\n\t"	\
+		"movups %%xmm3,0x30(%0)	;\n\t"	\
+		:				\
+		: "r" (xmm_save) 		\
+		: "memory");			\
+} while (0)
+
+#define XMMS_RESTORE				\
+do {						\
+	asm volatile(				\
+		"sfence			;\n\t"	\
+		"movups (%0),%%xmm0	;\n\t"	\
+		"movups 0x10(%0),%%xmm1	;\n\t"	\
+		"movups 0x20(%0),%%xmm2	;\n\t"	\
+		"movups 0x30(%0),%%xmm3	;\n\t"	\
+		:				\
+		: "r" (xmm_save)		\
+		: "memory");			\
+	write_cr0(cr0);				\
+	preempt_enable();			\
+} while (0)
+
+#define ALIGN16 __attribute__((aligned(16)))
+
+#define OFFS(x)		"16*("#x")"
+#define PF_OFFS(x)	"256+16*("#x")"
+#define	PF0(x)		"	prefetchnta "PF_OFFS(x)"(%1)		;\n"
+#define LD(x, y)	"       movaps   "OFFS(x)"(%1), %%xmm"#y"	;\n"
+#define ST(x, y)	"       movaps %%xmm"#y",   "OFFS(x)"(%1)	;\n"
+#define PF1(x)		"	prefetchnta "PF_OFFS(x)"(%2)		;\n"
+#define PF2(x)		"	prefetchnta "PF_OFFS(x)"(%3)		;\n"
+#define PF3(x)		"	prefetchnta "PF_OFFS(x)"(%4)		;\n"
+#define PF4(x)		"	prefetchnta "PF_OFFS(x)"(%5)		;\n"
+#define PF5(x)		"	prefetchnta "PF_OFFS(x)"(%6)		;\n"
+#define XO1(x, y)	"       xorps   "OFFS(x)"(%2), %%xmm"#y"	;\n"
+#define XO2(x, y)	"       xorps   "OFFS(x)"(%3), %%xmm"#y"	;\n"
+#define XO3(x, y)	"       xorps   "OFFS(x)"(%4), %%xmm"#y"	;\n"
+#define XO4(x, y)	"       xorps   "OFFS(x)"(%5), %%xmm"#y"	;\n"
+#define XO5(x, y)	"       xorps   "OFFS(x)"(%6), %%xmm"#y"	;\n"
+
+
+static void
+xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	unsigned long lines = bytes >> 8;
+	char xmm_save[16*4] ALIGN16;
+	int cr0;
+
+	XMMS_SAVE;
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i)					\
+		LD(i, 0)				\
+			LD(i + 1, 1)			\
+		PF1(i)					\
+				PF1(i + 2)		\
+				LD(i + 2, 2)		\
+					LD(i + 3, 3)	\
+		PF0(i + 4)				\
+				PF0(i + 6)		\
+		XO1(i, 0)				\
+			XO1(i + 1, 1)			\
+				XO1(i + 2, 2)		\
+					XO1(i + 3, 3)	\
+		ST(i, 0)				\
+			ST(i + 1, 1)			\
+				ST(i + 2, 2)		\
+					ST(i + 3, 3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+	"       addl $256, %1           ;\n"
+	"       addl $256, %2           ;\n"
+	"       decl %0                 ;\n"
+	"       jnz 1b                  ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2)
+	:
+	: "memory");
+
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3)
+{
+	unsigned long lines = bytes >> 8;
+	char xmm_save[16*4] ALIGN16;
+	int cr0;
+
+	XMMS_SAVE;
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i + 2)		\
+		LD(i,0)					\
+			LD(i + 1, 1)			\
+				LD(i + 2, 2)		\
+					LD(i + 3, 3)	\
+		PF2(i)					\
+				PF2(i + 2)		\
+		PF0(i + 4)				\
+				PF0(i + 6)		\
+		XO1(i,0)				\
+			XO1(i + 1, 1)			\
+				XO1(i + 2, 2)		\
+					XO1(i + 3, 3)	\
+		XO2(i,0)				\
+			XO2(i + 1, 1)			\
+				XO2(i + 2, 2)		\
+					XO2(i + 3, 3)	\
+		ST(i,0)					\
+			ST(i + 1, 1)			\
+				ST(i + 2, 2)		\
+					ST(i + 3, 3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+	"       addl $256, %1           ;\n"
+	"       addl $256, %2           ;\n"
+	"       addl $256, %3           ;\n"
+	"       decl %0                 ;\n"
+	"       jnz 1b                  ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r"(p2), "+r"(p3)
+	:
+	: "memory" );
+
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3, unsigned long *p4)
+{
+	unsigned long lines = bytes >> 8;
+	char xmm_save[16*4] ALIGN16;
+	int cr0;
+
+	XMMS_SAVE;
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i + 2)		\
+		LD(i,0)					\
+			LD(i + 1, 1)			\
+				LD(i + 2, 2)		\
+					LD(i + 3, 3)	\
+		PF2(i)					\
+				PF2(i + 2)		\
+		XO1(i,0)				\
+			XO1(i + 1, 1)			\
+				XO1(i + 2, 2)		\
+					XO1(i + 3, 3)	\
+		PF3(i)					\
+				PF3(i + 2)		\
+		PF0(i + 4)				\
+				PF0(i + 6)		\
+		XO2(i,0)				\
+			XO2(i + 1, 1)			\
+				XO2(i + 2, 2)		\
+					XO2(i + 3, 3)	\
+		XO3(i,0)				\
+			XO3(i + 1, 1)			\
+				XO3(i + 2, 2)		\
+					XO3(i + 3, 3)	\
+		ST(i,0)					\
+			ST(i + 1, 1)			\
+				ST(i + 2, 2)		\
+					ST(i + 3, 3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+	"       addl $256, %1           ;\n"
+	"       addl $256, %2           ;\n"
+	"       addl $256, %3           ;\n"
+	"       addl $256, %4           ;\n"
+	"       decl %0                 ;\n"
+	"       jnz 1b                  ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
+	:
+	: "memory" );
+
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	unsigned long lines = bytes >> 8;
+	char xmm_save[16*4] ALIGN16;
+	int cr0;
+
+	XMMS_SAVE;
+
+	/* Make sure GCC forgets anything it knows about p4 or p5,
+	   such that it won't pass to the asm volatile below a
+	   register that is shared with any other variable.  That's
+	   because we modify p4 and p5 there, but we can't mark them
+	   as read/write, otherwise we'd overflow the 10-asm-operands
+	   limit of GCC < 3.1.  */
+	asm("" : "+r" (p4), "+r" (p5));
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i + 2)		\
+		LD(i,0)					\
+			LD(i + 1, 1)			\
+				LD(i + 2, 2)		\
+					LD(i + 3, 3)	\
+		PF2(i)					\
+				PF2(i + 2)		\
+		XO1(i,0)				\
+			XO1(i + 1, 1)			\
+				XO1(i + 2, 2)		\
+					XO1(i + 3, 3)	\
+		PF3(i)					\
+				PF3(i + 2)		\
+		XO2(i,0)				\
+			XO2(i + 1, 1)			\
+				XO2(i + 2, 2)		\
+					XO2(i + 3, 3)	\
+		PF4(i)					\
+				PF4(i + 2)		\
+		PF0(i + 4)				\
+				PF0(i + 6)		\
+		XO3(i,0)				\
+			XO3(i + 1, 1)			\
+				XO3(i + 2, 2)		\
+					XO3(i + 3, 3)	\
+		XO4(i,0)				\
+			XO4(i + 1, 1)			\
+				XO4(i + 2, 2)		\
+					XO4(i + 3, 3)	\
+		ST(i,0)					\
+			ST(i + 1, 1)			\
+				ST(i + 2, 2)		\
+					ST(i + 3, 3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+	"       addl $256, %1           ;\n"
+	"       addl $256, %2           ;\n"
+	"       addl $256, %3           ;\n"
+	"       addl $256, %4           ;\n"
+	"       addl $256, %5           ;\n"
+	"       decl %0                 ;\n"
+	"       jnz 1b                  ;\n"
+	: "+r" (lines),
+	  "+r" (p1), "+r" (p2), "+r" (p3)
+	: "r" (p4), "r" (p5)
+	: "memory");
+
+	/* p4 and p5 were modified, and now the variables are dead.
+	   Clobber them just to be sure nobody does something stupid
+	   like assuming they have some legal value.  */
+	asm("" : "=r" (p4), "=r" (p5));
+
+	XMMS_RESTORE;
+}
+
+static struct xor_block_template xor_block_pIII_sse = {
+	.name = "pIII_sse",
+	.do_2 = xor_sse_2,
+	.do_3 = xor_sse_3,
+	.do_4 = xor_sse_4,
+	.do_5 = xor_sse_5,
+};
+
+/* Also try the generic routines.  */
+#include <asm-generic/xor.h>
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES				\
+do {							\
+	xor_speed(&xor_block_8regs);			\
+	xor_speed(&xor_block_8regs_p);			\
+	xor_speed(&xor_block_32regs);			\
+	xor_speed(&xor_block_32regs_p);			\
+	if (cpu_has_xmm)				\
+		xor_speed(&xor_block_pIII_sse);		\
+	if (cpu_has_mmx) {				\
+		xor_speed(&xor_block_pII_mmx);		\
+		xor_speed(&xor_block_p5_mmx);		\
+	}						\
+} while (0)
+
+/* We force the use of the SSE xor block because it can write around L2.
+   We may also be able to load into the L1 only depending on how the cpu
+   deals with a load to a line that is being prefetched.  */
+#define XOR_SELECT_TEMPLATE(FASTEST)			\
+	(cpu_has_xmm ? &xor_block_pIII_sse : FASTEST)
+
+#endif /* _ASM_X86_XOR_32_H */
diff --git a/arch/x86/include/asm/xor_64.h b/arch/x86/include/asm/xor_64.h
new file mode 100644
index 0000000..1549b5e
--- /dev/null
+++ b/arch/x86/include/asm/xor_64.h
@@ -0,0 +1,361 @@
+#ifndef _ASM_X86_XOR_64_H
+#define _ASM_X86_XOR_64_H
+
+/*
+ * Optimized RAID-5 checksumming functions for MMX and SSE.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+/*
+ * Cache avoiding checksumming functions utilizing KNI instructions
+ * Copyright (C) 1999 Zach Brown (with obvious credit due Ingo)
+ */
+
+/*
+ * Based on
+ * High-speed RAID5 checksumming functions utilizing SSE instructions.
+ * Copyright (C) 1998 Ingo Molnar.
+ */
+
+/*
+ * x86-64 changes / gcc fixes from Andi Kleen.
+ * Copyright 2002 Andi Kleen, SuSE Labs.
+ *
+ * This hasn't been optimized for the hammer yet, but there are likely
+ * no advantages to be gotten from x86-64 here anyways.
+ */
+
+typedef struct {
+	unsigned long a, b;
+} __attribute__((aligned(16))) xmm_store_t;
+
+/* Doesn't use gcc to save the XMM registers, because there is no easy way to
+   tell it to do a clts before the register saving. */
+#define XMMS_SAVE				\
+do {						\
+	preempt_disable();			\
+	asm volatile(				\
+		"movq %%cr0,%0		;\n\t"	\
+		"clts			;\n\t"	\
+		"movups %%xmm0,(%1)	;\n\t"	\
+		"movups %%xmm1,0x10(%1)	;\n\t"	\
+		"movups %%xmm2,0x20(%1)	;\n\t"	\
+		"movups %%xmm3,0x30(%1)	;\n\t"	\
+		: "=&r" (cr0)			\
+		: "r" (xmm_save) 		\
+		: "memory");			\
+} while (0)
+
+#define XMMS_RESTORE				\
+do {						\
+	asm volatile(				\
+		"sfence			;\n\t"	\
+		"movups (%1),%%xmm0	;\n\t"	\
+		"movups 0x10(%1),%%xmm1	;\n\t"	\
+		"movups 0x20(%1),%%xmm2	;\n\t"	\
+		"movups 0x30(%1),%%xmm3	;\n\t"	\
+		"movq 	%0,%%cr0	;\n\t"	\
+		:				\
+		: "r" (cr0), "r" (xmm_save)	\
+		: "memory");			\
+	preempt_enable();			\
+} while (0)
+
+#define OFFS(x)		"16*("#x")"
+#define PF_OFFS(x)	"256+16*("#x")"
+#define	PF0(x)		"	prefetchnta "PF_OFFS(x)"(%[p1])		;\n"
+#define LD(x, y)	"       movaps   "OFFS(x)"(%[p1]), %%xmm"#y"	;\n"
+#define ST(x, y)	"       movaps %%xmm"#y",   "OFFS(x)"(%[p1])	;\n"
+#define PF1(x)		"	prefetchnta "PF_OFFS(x)"(%[p2])		;\n"
+#define PF2(x)		"	prefetchnta "PF_OFFS(x)"(%[p3])		;\n"
+#define PF3(x)		"	prefetchnta "PF_OFFS(x)"(%[p4])		;\n"
+#define PF4(x)		"	prefetchnta "PF_OFFS(x)"(%[p5])		;\n"
+#define PF5(x)		"	prefetchnta "PF_OFFS(x)"(%[p6])		;\n"
+#define XO1(x, y)	"       xorps   "OFFS(x)"(%[p2]), %%xmm"#y"	;\n"
+#define XO2(x, y)	"       xorps   "OFFS(x)"(%[p3]), %%xmm"#y"	;\n"
+#define XO3(x, y)	"       xorps   "OFFS(x)"(%[p4]), %%xmm"#y"	;\n"
+#define XO4(x, y)	"       xorps   "OFFS(x)"(%[p5]), %%xmm"#y"	;\n"
+#define XO5(x, y)	"       xorps   "OFFS(x)"(%[p6]), %%xmm"#y"	;\n"
+
+
+static void
+xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	unsigned int lines = bytes >> 8;
+	unsigned long cr0;
+	xmm_store_t xmm_save[4];
+
+	XMMS_SAVE;
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+		LD(i, 0)				\
+			LD(i + 1, 1)			\
+		PF1(i)					\
+				PF1(i + 2)		\
+				LD(i + 2, 2)		\
+					LD(i + 3, 3)	\
+		PF0(i + 4)				\
+				PF0(i + 6)		\
+		XO1(i, 0)				\
+			XO1(i + 1, 1)			\
+				XO1(i + 2, 2)		\
+					XO1(i + 3, 3)	\
+		ST(i, 0)				\
+			ST(i + 1, 1)			\
+				ST(i + 2, 2)		\
+					ST(i + 3, 3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+	"       addq %[inc], %[p1]           ;\n"
+	"       addq %[inc], %[p2]           ;\n"
+		"		decl %[cnt] ; jnz 1b"
+	: [p1] "+r" (p1), [p2] "+r" (p2), [cnt] "+r" (lines)
+	: [inc] "r" (256UL)
+	: "memory");
+
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3)
+{
+	unsigned int lines = bytes >> 8;
+	xmm_store_t xmm_save[4];
+	unsigned long cr0;
+
+	XMMS_SAVE;
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i + 2)		\
+		LD(i, 0)					\
+			LD(i + 1, 1)			\
+				LD(i + 2, 2)		\
+					LD(i + 3, 3)	\
+		PF2(i)					\
+				PF2(i + 2)		\
+		PF0(i + 4)				\
+				PF0(i + 6)		\
+		XO1(i, 0)				\
+			XO1(i + 1, 1)			\
+				XO1(i + 2, 2)		\
+					XO1(i + 3, 3)	\
+		XO2(i, 0)				\
+			XO2(i + 1, 1)			\
+				XO2(i + 2, 2)		\
+					XO2(i + 3, 3)	\
+		ST(i, 0)				\
+			ST(i + 1, 1)			\
+				ST(i + 2, 2)		\
+					ST(i + 3, 3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+	"       addq %[inc], %[p1]           ;\n"
+	"       addq %[inc], %[p2]          ;\n"
+	"       addq %[inc], %[p3]           ;\n"
+		"		decl %[cnt] ; jnz 1b"
+	: [cnt] "+r" (lines),
+	  [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3)
+	: [inc] "r" (256UL)
+	: "memory");
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3, unsigned long *p4)
+{
+	unsigned int lines = bytes >> 8;
+	xmm_store_t xmm_save[4];
+	unsigned long cr0;
+
+	XMMS_SAVE;
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i + 2)		\
+		LD(i, 0)				\
+			LD(i + 1, 1)			\
+				LD(i + 2, 2)		\
+					LD(i + 3, 3)	\
+		PF2(i)					\
+				PF2(i + 2)		\
+		XO1(i, 0)				\
+			XO1(i + 1, 1)			\
+				XO1(i + 2, 2)		\
+					XO1(i + 3, 3)	\
+		PF3(i)					\
+				PF3(i + 2)		\
+		PF0(i + 4)				\
+				PF0(i + 6)		\
+		XO2(i, 0)				\
+			XO2(i + 1, 1)			\
+				XO2(i + 2, 2)		\
+					XO2(i + 3, 3)	\
+		XO3(i, 0)				\
+			XO3(i + 1, 1)			\
+				XO3(i + 2, 2)		\
+					XO3(i + 3, 3)	\
+		ST(i, 0)				\
+			ST(i + 1, 1)			\
+				ST(i + 2, 2)		\
+					ST(i + 3, 3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+	"       addq %[inc], %[p1]           ;\n"
+	"       addq %[inc], %[p2]           ;\n"
+	"       addq %[inc], %[p3]           ;\n"
+	"       addq %[inc], %[p4]           ;\n"
+	"	decl %[cnt] ; jnz 1b"
+	: [cnt] "+c" (lines),
+	  [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3), [p4] "+r" (p4)
+	: [inc] "r" (256UL)
+	: "memory" );
+
+	XMMS_RESTORE;
+}
+
+static void
+xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	  unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	unsigned int lines = bytes >> 8;
+	xmm_store_t xmm_save[4];
+	unsigned long cr0;
+
+	XMMS_SAVE;
+
+	asm volatile(
+#undef BLOCK
+#define BLOCK(i) \
+		PF1(i)					\
+				PF1(i + 2)		\
+		LD(i, 0)				\
+			LD(i + 1, 1)			\
+				LD(i + 2, 2)		\
+					LD(i + 3, 3)	\
+		PF2(i)					\
+				PF2(i + 2)		\
+		XO1(i, 0)				\
+			XO1(i + 1, 1)			\
+				XO1(i + 2, 2)		\
+					XO1(i + 3, 3)	\
+		PF3(i)					\
+				PF3(i + 2)		\
+		XO2(i, 0)				\
+			XO2(i + 1, 1)			\
+				XO2(i + 2, 2)		\
+					XO2(i + 3, 3)	\
+		PF4(i)					\
+				PF4(i + 2)		\
+		PF0(i + 4)				\
+				PF0(i + 6)		\
+		XO3(i, 0)				\
+			XO3(i + 1, 1)			\
+				XO3(i + 2, 2)		\
+					XO3(i + 3, 3)	\
+		XO4(i, 0)				\
+			XO4(i + 1, 1)			\
+				XO4(i + 2, 2)		\
+					XO4(i + 3, 3)	\
+		ST(i, 0)				\
+			ST(i + 1, 1)			\
+				ST(i + 2, 2)		\
+					ST(i + 3, 3)	\
+
+
+		PF0(0)
+				PF0(2)
+
+	" .align 32			;\n"
+	" 1:                            ;\n"
+
+		BLOCK(0)
+		BLOCK(4)
+		BLOCK(8)
+		BLOCK(12)
+
+	"       addq %[inc], %[p1]           ;\n"
+	"       addq %[inc], %[p2]           ;\n"
+	"       addq %[inc], %[p3]           ;\n"
+	"       addq %[inc], %[p4]           ;\n"
+	"       addq %[inc], %[p5]           ;\n"
+	"	decl %[cnt] ; jnz 1b"
+	: [cnt] "+c" (lines),
+	  [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3), [p4] "+r" (p4),
+	  [p5] "+r" (p5)
+	: [inc] "r" (256UL)
+	: "memory");
+
+	XMMS_RESTORE;
+}
+
+static struct xor_block_template xor_block_sse = {
+	.name = "generic_sse",
+	.do_2 = xor_sse_2,
+	.do_3 = xor_sse_3,
+	.do_4 = xor_sse_4,
+	.do_5 = xor_sse_5,
+};
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES			\
+do {						\
+	xor_speed(&xor_block_sse);		\
+} while (0)
+
+/* We force the use of the SSE xor block because it can write around L2.
+   We may also be able to load into the L1 only depending on how the cpu
+   deals with a load to a line that is being prefetched.  */
+#define XOR_SELECT_TEMPLATE(FASTEST) (&xor_block_sse)
+
+#endif /* _ASM_X86_XOR_64_H */
diff --git a/include/asm-x86/xsave.h b/arch/x86/include/asm/xsave.h
similarity index 100%
rename from include/asm-x86/xsave.h
rename to arch/x86/include/asm/xsave.h
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 0d1c26a..8c1f76a 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -153,12 +153,13 @@
 }
 
 #ifdef CONFIG_PCI_MMCONFIG
+
+static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
+
 /* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
 struct acpi_mcfg_allocation *pci_mmcfg_config;
 int pci_mmcfg_config_num;
 
-static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
-
 static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
 {
 	if (!strcmp(mcfg->header.oem_id, "SGI"))
@@ -1136,7 +1137,7 @@
 		return gsi;
 	}
 	if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
-		pr_debug(KERN_DEBUG "Pin %d-%d already programmed\n",
+		pr_debug("Pin %d-%d already programmed\n",
 			 mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
 #ifdef CONFIG_X86_32
 		return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
@@ -1598,6 +1599,11 @@
 		     DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
 		     },
 	 },
+	{}
+};
+
+/* second table for DMI checks that should run after early-quirks */
+static struct dmi_system_id __initdata acpi_dmi_table_late[] = {
 	/*
 	 * HP laptops which use a DSDT reporting as HP/SB400/10000,
 	 * which includes some code which overrides all temperature
@@ -1726,6 +1732,9 @@
 
 int __init acpi_boot_init(void)
 {
+	/* those are executed after early-quirks are executed */
+	dmi_check_system(acpi_dmi_table_late);
+
 	/*
 	 * If acpi_disabled, bail out
 	 * One exception: acpi=ht continues far enough to enumerate LAPICs
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index c44cd6d..806b4e9 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -22,7 +22,7 @@
 static unsigned long acpi_realmode;
 
 #if defined(CONFIG_SMP) && defined(CONFIG_64BIT)
-static char temp_stack[10240];
+static char temp_stack[4096];
 #endif
 
 /**
@@ -98,7 +98,7 @@
 #else /* CONFIG_64BIT */
 	header->trampoline_segment = setup_trampoline() >> 4;
 #ifdef CONFIG_SMP
-	stack_start.sp = temp_stack + 4096;
+	stack_start.sp = temp_stack + sizeof(temp_stack);
 	early_gdt_descr.address =
 			(unsigned long)get_cpu_gdt_table(smp_processor_id());
 #endif
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 4cd8083..0cdcda3 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -212,7 +212,7 @@
 /* Programs the physical address of the device table into the IOMMU hardware */
 static void __init iommu_set_device_table(struct amd_iommu *iommu)
 {
-	u32 entry;
+	u64 entry;
 
 	BUG_ON(iommu->mmio_base == NULL);
 
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index 505543a..7fcf63d 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -22,7 +22,7 @@
 
 #define __NO_STUBS 1
 #undef __SYSCALL
-#undef ASM_X86__UNISTD_64_H
+#undef _ASM_X86_UNISTD_64_H
 #define __SYSCALL(nr, sym) [nr] = 1,
 static char syscalls[] = {
 #include <asm/unistd.h>
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 7f0b45a5..82ec607 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -25,7 +25,7 @@
 quiet_cmd_mkcapflags = MKCAP   $@
       cmd_mkcapflags = $(PERL) $(srctree)/$(src)/mkcapflags.pl $< $@
 
-cpufeature = $(src)/../../../../include/asm-x86/cpufeature.h
+cpufeature = $(src)/../../include/asm/cpufeature.h
 
 targets += capflags.c
 $(obj)/capflags.c: $(cpufeature) $(src)/mkcapflags.pl FORCE
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index c24c4a4..8e48c5d 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -780,6 +780,9 @@
 {
 	int ret;
 
+	if (acpi_disabled)
+		return 0;
+
 	dprintk("acpi_cpufreq_init\n");
 
 	ret = acpi_cpufreq_early_init();
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 008d23b..d3dcd58 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -45,7 +45,6 @@
 #endif
 
 #define PFX "powernow-k8: "
-#define BFX PFX "BIOS error: "
 #define VERSION "version 2.20.00"
 #include "powernow-k8.h"
 
@@ -536,35 +535,40 @@
 
 	for (j = 0; j < data->numps; j++) {
 		if (pst[j].vid > LEAST_VID) {
-			printk(KERN_ERR PFX "vid %d invalid : 0x%x\n", j, pst[j].vid);
+			printk(KERN_ERR FW_BUG PFX "vid %d invalid : 0x%x\n",
+			       j, pst[j].vid);
 			return -EINVAL;
 		}
 		if (pst[j].vid < data->rvo) {	/* vid + rvo >= 0 */
-			printk(KERN_ERR BFX "0 vid exceeded with pstate %d\n", j);
+			printk(KERN_ERR FW_BUG PFX "0 vid exceeded with pstate"
+			       " %d\n", j);
 			return -ENODEV;
 		}
 		if (pst[j].vid < maxvid + data->rvo) {	/* vid + rvo >= maxvid */
-			printk(KERN_ERR BFX "maxvid exceeded with pstate %d\n", j);
+			printk(KERN_ERR FW_BUG PFX "maxvid exceeded with pstate"
+			       " %d\n", j);
 			return -ENODEV;
 		}
 		if (pst[j].fid > MAX_FID) {
-			printk(KERN_ERR BFX "maxfid exceeded with pstate %d\n", j);
+			printk(KERN_ERR FW_BUG PFX "maxfid exceeded with pstate"
+			       " %d\n", j);
 			return -ENODEV;
 		}
 		if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) {
 			/* Only first fid is allowed to be in "low" range */
-			printk(KERN_ERR BFX "two low fids - %d : 0x%x\n", j, pst[j].fid);
+			printk(KERN_ERR FW_BUG PFX "two low fids - %d : "
+			       "0x%x\n", j, pst[j].fid);
 			return -EINVAL;
 		}
 		if (pst[j].fid < lastfid)
 			lastfid = pst[j].fid;
 	}
 	if (lastfid & 1) {
-		printk(KERN_ERR BFX "lastfid invalid\n");
+		printk(KERN_ERR FW_BUG PFX "lastfid invalid\n");
 		return -EINVAL;
 	}
 	if (lastfid > LO_FID_TABLE_TOP)
-		printk(KERN_INFO BFX  "first fid not from lo freq table\n");
+		printk(KERN_INFO FW_BUG PFX  "first fid not from lo freq table\n");
 
 	return 0;
 }
@@ -672,13 +676,13 @@
 
 		dprintk("table vers: 0x%x\n", psb->tableversion);
 		if (psb->tableversion != PSB_VERSION_1_4) {
-			printk(KERN_ERR BFX "PSB table is not v1.4\n");
+			printk(KERN_ERR FW_BUG PFX "PSB table is not v1.4\n");
 			return -ENODEV;
 		}
 
 		dprintk("flags: 0x%x\n", psb->flags1);
 		if (psb->flags1) {
-			printk(KERN_ERR BFX "unknown flags\n");
+			printk(KERN_ERR FW_BUG PFX "unknown flags\n");
 			return -ENODEV;
 		}
 
@@ -705,7 +709,7 @@
 			}
 		}
 		if (cpst != 1) {
-			printk(KERN_ERR BFX "numpst must be 1\n");
+			printk(KERN_ERR FW_BUG PFX "numpst must be 1\n");
 			return -ENODEV;
 		}
 
@@ -1130,17 +1134,19 @@
 			       "ACPI Processor module before starting this "
 			       "driver.\n");
 #else
-			printk(KERN_ERR PFX "Your BIOS does not provide ACPI "
-			       "_PSS objects in a way that Linux understands. "
-			       "Please report this to the Linux ACPI maintainers"
-			       " and complain to your BIOS vendor.\n");
+			printk(KERN_ERR FW_BUG PFX "Your BIOS does not provide"
+			       " ACPI _PSS objects in a way that Linux "
+			       "understands. Please report this to the Linux "
+			       "ACPI maintainers and complain to your BIOS "
+			       "vendor.\n");
 #endif
 			kfree(data);
 			return -ENODEV;
 		}
 		if (pol->cpu != 0) {
-			printk(KERN_ERR PFX "No ACPI _PSS objects for CPU other than "
-			       "CPU0. Complain to your BIOS vendor.\n");
+			printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for "
+			       "CPU other than CPU0. Complain to your BIOS "
+			       "vendor.\n");
 			kfree(data);
 			return -ENODEV;
 		}
@@ -1193,7 +1199,7 @@
 
 	/* min/max the cpu is capable of */
 	if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) {
-		printk(KERN_ERR PFX "invalid powernow_table\n");
+		printk(KERN_ERR FW_BUG PFX "invalid powernow_table\n");
 		powernow_k8_cpu_exit_acpi(data);
 		kfree(data->powernow_table);
 		kfree(data);
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index a26c480..01b1244 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -160,14 +160,16 @@
 {
 	if (*pos == 0)	/* just in case, cpu 0 is not the first */
 		*pos = first_cpu(cpu_online_map);
-	if ((*pos) < nr_cpu_ids && cpu_online(*pos))
+	else
+		*pos = next_cpu_nr(*pos - 1, cpu_online_map);
+	if ((*pos) < nr_cpu_ids)
 		return &cpu_data(*pos);
 	return NULL;
 }
 
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 {
-	*pos = next_cpu(*pos, cpu_online_map);
+	(*pos)++;
 	return c_start(m, pos);
 }
 
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index 1a78180..b361475 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -405,7 +405,6 @@
 		panic("Non maskable interrupt");
 	console_silent();
 	spin_unlock(&nmi_print_lock);
-	bust_spinlocks(0);
 
 	/*
 	 * If we are in kernel we are probably nested up pretty bad
@@ -416,6 +415,7 @@
 		crash_kexec(regs);
 	}
 
+	bust_spinlocks(0);
 	do_exit(SIGSEGV);
 }
 
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 733c4f8..3ce029f 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -95,7 +95,8 @@
 
 }
 
-static u32 ati_ixp4x0_rev(int num, int slot, int func)
+#if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC)
+static u32 __init ati_ixp4x0_rev(int num, int slot, int func)
 {
 	u32 d;
 	u8  b;
@@ -115,7 +116,6 @@
 
 static void __init ati_bugs(int num, int slot, int func)
 {
-#if defined(CONFIG_ACPI) && defined (CONFIG_X86_IO_APIC)
 	u32 d;
 	u8  b;
 
@@ -138,9 +138,56 @@
 		printk(KERN_INFO "If you got timer trouble "
 		       "try acpi_use_timer_override\n");
 	}
-#endif
 }
 
+static u32 __init ati_sbx00_rev(int num, int slot, int func)
+{
+	u32 old, d;
+
+	d = read_pci_config(num, slot, func, 0x70);
+	old = d;
+	d &= ~(1<<8);
+	write_pci_config(num, slot, func, 0x70, d);
+	d = read_pci_config(num, slot, func, 0x8);
+	d &= 0xff;
+	write_pci_config(num, slot, func, 0x70, old);
+
+	return d;
+}
+
+static void __init ati_bugs_contd(int num, int slot, int func)
+{
+	u32 d, rev;
+
+	if (acpi_use_timer_override)
+		return;
+
+	rev = ati_sbx00_rev(num, slot, func);
+	if (rev > 0x13)
+		return;
+
+	/* check for IRQ0 interrupt swap */
+	d = read_pci_config(num, slot, func, 0x64);
+	if (!(d & (1<<14)))
+		acpi_skip_timer_override = 1;
+
+	if (acpi_skip_timer_override) {
+		printk(KERN_INFO "SB600 revision 0x%x\n", rev);
+		printk(KERN_INFO "Ignoring ACPI timer override.\n");
+		printk(KERN_INFO "If you got timer trouble "
+		       "try acpi_use_timer_override\n");
+	}
+}
+#else
+static void __init ati_bugs(int num, int slot, int func)
+{
+}
+
+static void __init ati_bugs_contd(int num, int slot, int func)
+{
+}
+#endif
+
 #ifdef CONFIG_DMAR
 static void __init intel_g33_dmar(int num, int slot, int func)
 {
@@ -176,6 +223,8 @@
 	  PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config },
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
 	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
+	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
 #ifdef CONFIG_DMAR
 	{ PCI_VENDOR_ID_INTEL, 0x29c0,
 	  PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, intel_g33_dmar },
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index c356423..dd65143 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -1024,7 +1024,7 @@
 	RING0_INT_FRAME
 	pushl $0
 	CFI_ADJUST_CFA_OFFSET 4
-	pushl $do_machine_check
+	pushl machine_check_vector
 	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
 	CFI_ENDPROC
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 2ec2de8..c026279 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -25,7 +25,7 @@
 #include <acpi/acpi_bus.h>
 #endif
 
-static int __init flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	return 1;
 }
@@ -170,7 +170,7 @@
  * We cannot use logical delivery in this case because the mask
  * overflows, so use physical mode.
  */
-static int __init physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 #ifdef CONFIG_ACPI
 	/*
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index e4bf2cc..f6a2c8e 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -12,7 +12,7 @@
 
 DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
 
-static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (cpu_has_x2apic)
 		return 1;
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index 8f1343d..d042211 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -19,7 +19,7 @@
 }
 early_param("x2apic_phys", set_x2apic_phys_mode);
 
-static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (cpu_has_x2apic && x2apic_phys)
 		return 1;
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index bfd53284..680a065 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -30,7 +30,7 @@
 
 static enum uv_system_type uv_system_type;
 
-static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (!strcmp(oem_id, "SGI")) {
 		if (!strcmp(oem_table_id, "UVL"))
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index ccf6c50..d1d4dc5 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -36,7 +36,7 @@
 }
 
 #ifdef CONFIG_X86_32
-# define irq_stats(x)		(&per_cpu(irq_stat,x))
+# define irq_stats(x)		(&per_cpu(irq_stat, x))
 #else
 # define irq_stats(x)		cpu_pda(x)
 #endif
@@ -113,7 +113,7 @@
 	if (i == 0) {
 		seq_printf(p, "           ");
 		for_each_online_cpu(j)
-			seq_printf(p, "CPU%-8d",j);
+			seq_printf(p, "CPU%-8d", j);
 		seq_putc(p, '\n');
 	}
 
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 1926248..1972266 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -9,8 +9,6 @@
 #include <asm/calgary.h>
 #include <asm/amd_iommu.h>
 
-static int forbid_dac __read_mostly;
-
 struct dma_mapping_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
@@ -293,17 +291,3 @@
 }
 /* Must execute after PCI subsystem */
 fs_initcall(pci_iommu_init);
-
-#ifdef CONFIG_PCI
-/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
-
-static __devinit void via_no_dac(struct pci_dev *dev)
-{
-	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
-		printk(KERN_INFO "PCI: VIA PCI bridge detected."
-				 "Disabling DAC.\n");
-		forbid_dac = 1;
-	}
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
-#endif
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index cd8c0ed..c958120f 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -63,6 +63,13 @@
 {
 	atomic_notifier_chain_register(&idle_notifier, n);
 }
+EXPORT_SYMBOL_GPL(idle_notifier_register);
+
+void idle_notifier_unregister(struct notifier_block *n)
+{
+	atomic_notifier_chain_unregister(&idle_notifier, n);
+}
+EXPORT_SYMBOL_GPL(idle_notifier_unregister);
 
 void enter_idle(void)
 {
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 410c88f..ae0c0d3 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -218,7 +218,7 @@
 	/* allocate the map */
 	map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t));
 
-	pr_debug(KERN_DEBUG "Node to cpumask map at %p for %d nodes\n",
+	pr_debug("Node to cpumask map at %p for %d nodes\n",
 		 map, nr_node_ids);
 
 	/* node_to_cpumask() will now work */
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 7ece815..7b10933 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -893,9 +893,11 @@
 		smpboot_setup_warm_reset_vector(start_ip);
 		/*
 		 * Be paranoid about clearing APIC errors.
-	 	*/
-		apic_write(APIC_ESR, 0);
-		apic_read(APIC_ESR);
+		*/
+		if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+			apic_write(APIC_ESR, 0);
+			apic_read(APIC_ESR);
+		}
 	}
 
 	/*
diff --git a/arch/x86/kernel/syscall_64.c b/arch/x86/kernel/syscall_64.c
index 3d1be4f..de87d60 100644
--- a/arch/x86/kernel/syscall_64.c
+++ b/arch/x86/kernel/syscall_64.c
@@ -8,12 +8,12 @@
 #define __NO_STUBS
 
 #define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
-#undef ASM_X86__UNISTD_64_H
+#undef _ASM_X86_UNISTD_64_H
 #include <asm/unistd_64.h>
 
 #undef __SYSCALL
 #define __SYSCALL(nr, sym) [nr] = sym,
-#undef ASM_X86__UNISTD_64_H
+#undef _ASM_X86_UNISTD_64_H
 
 typedef void (*sys_call_ptr_t)(void);
 
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 8b8c0d66..04431f3 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -6,7 +6,7 @@
  *	This code is released under the GNU General Public License version 2 or
  *	later.
  */
-#include <linux/mc146818rtc.h>
+#include <linux/seq_file.h>
 #include <linux/proc_fs.h>
 #include <linux/kernel.h>
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index e062974..04d242ab 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -931,14 +931,6 @@
 }
 
 #ifdef CONFIG_X86_32
-#ifdef CONFIG_X86_MCE
-dotraplinkage void __kprobes do_machine_check(struct pt_regs *regs, long error)
-{
-	conditional_sti(regs);
-	machine_check_vector(regs, error);
-}
-#endif
-
 dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
 {
 	siginfo_t info;
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index 9abac8a..b13acb7 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -248,7 +248,7 @@
  * This will be saved when ever the FP and extended state context is
  * saved on the user stack during the signal handler delivery to the user.
  */
-void prepare_fx_sw_frame(void)
+static void prepare_fx_sw_frame(void)
 {
 	int size_extended = (xstate_size - sizeof(struct i387_fxsave_struct)) +
 			     FP_XSTATE_MAGIC2_SIZE;
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 634132a..11c6725 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -204,10 +204,10 @@
 	if (vcpu0 && waitqueue_active(&vcpu0->wq))
 		wake_up_interruptible(&vcpu0->wq);
 
-	pt->timer.expires = ktime_add_ns(pt->timer.expires, pt->period);
-	pt->scheduled = ktime_to_ns(pt->timer.expires);
+	hrtimer_add_expires_ns(&pt->timer, pt->period);
+	pt->scheduled = hrtimer_get_expires_ns(&pt->timer);
 	if (pt->period)
-		ps->channels[0].count_load_time = pt->timer.expires;
+		ps->channels[0].count_load_time = hrtimer_get_expires(&pt->timer);
 
 	return (pt->period == 0 ? 0 : 1);
 }
@@ -257,7 +257,7 @@
 
 	timer = &pit->pit_state.pit_timer.timer;
 	if (hrtimer_cancel(timer))
-		hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS);
+		hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
 }
 
 static void destroy_pit_timer(struct kvm_kpit_timer *pt)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 6571926..0fc3cab 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -946,9 +946,7 @@
 
 	if (apic_lvtt_period(apic)) {
 		result = 1;
-		apic->timer.dev.expires = ktime_add_ns(
-					apic->timer.dev.expires,
-					apic->timer.period);
+		hrtimer_add_expires_ns(&apic->timer.dev, apic->timer.period);
 	}
 	return result;
 }
@@ -1117,7 +1115,7 @@
 
 	timer = &apic->timer.dev;
 	if (hrtimer_cancel(timer))
-		hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS);
+		hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
 }
 
 void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
index 672e17f..9cab18b 100644
--- a/arch/x86/mm/memtest.c
+++ b/arch/x86/mm/memtest.c
@@ -61,9 +61,9 @@
 				last_bad += incr;
 			} else {
 				if (start_bad) {
-					printk(KERN_CONT "\n  %010lx bad mem addr %010lx - %010lx reserved",
+					printk(KERN_CONT "\n  %016lx bad mem addr %010lx - %010lx reserved",
 						val, start_bad, last_bad + incr);
-					reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
+					reserve_early(start_bad, last_bad + incr, "BAD RAM");
 				}
 				start_bad = last_bad = start_phys_aligned;
 			}
@@ -72,9 +72,8 @@
 	if (start_bad) {
 		printk(KERN_CONT "\n  %016lx bad mem addr %010lx - %010lx reserved",
 			val, start_bad, last_bad + incr);
-		reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
+		reserve_early(start_bad, last_bad + incr, "BAD RAM");
 	}
-
 }
 
 /* default is disabled */
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 407d878..f1dc1b7 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -65,23 +65,22 @@
 	direct_pages_count[level - 1] += PTRS_PER_PTE;
 }
 
-int arch_report_meminfo(char *page)
+void arch_report_meminfo(struct seq_file *m)
 {
-	int n = sprintf(page, "DirectMap4k:  %8lu kB\n",
+	seq_printf(m, "DirectMap4k:  %8lu kB\n",
 			direct_pages_count[PG_LEVEL_4K] << 2);
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
-	n += sprintf(page + n, "DirectMap2M:  %8lu kB\n",
+	seq_printf(m, "DirectMap2M:  %8lu kB\n",
 			direct_pages_count[PG_LEVEL_2M] << 11);
 #else
-	n += sprintf(page + n, "DirectMap4M:  %8lu kB\n",
+	seq_printf(m, "DirectMap4M:  %8lu kB\n",
 			direct_pages_count[PG_LEVEL_2M] << 12);
 #endif
 #ifdef CONFIG_X86_64
 	if (direct_gbpages)
-		n += sprintf(page + n, "DirectMap1G:  %8lu kB\n",
+		seq_printf(m, "DirectMap1G:  %8lu kB\n",
 			direct_pages_count[PG_LEVEL_1G] << 20);
 #endif
-	return n;
 }
 #else
 static inline void split_page_count(int level) { }
diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c
index e2095cb..04df67f 100644
--- a/arch/x86/oprofile/backtrace.c
+++ b/arch/x86/oprofile/backtrace.c
@@ -52,8 +52,7 @@
 	unsigned long ret;
 } __attribute__((packed));
 
-static struct frame_head *
-dump_user_backtrace(struct frame_head * head)
+static struct frame_head *dump_user_backtrace(struct frame_head *head)
 {
 	struct frame_head bufhead[2];
 
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 57f6c90..022cd41 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -28,85 +28,9 @@
 static DEFINE_PER_CPU(struct op_msrs, cpu_msrs);
 static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
 
-static int nmi_start(void);
-static void nmi_stop(void);
-static void nmi_cpu_start(void *dummy);
-static void nmi_cpu_stop(void *dummy);
-
 /* 0 == registered but off, 1 == registered and on */
 static int nmi_enabled = 0;
 
-#ifdef CONFIG_SMP
-static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
-				 void *data)
-{
-	int cpu = (unsigned long)data;
-	switch (action) {
-	case CPU_DOWN_FAILED:
-	case CPU_ONLINE:
-		smp_call_function_single(cpu, nmi_cpu_start, NULL, 0);
-		break;
-	case CPU_DOWN_PREPARE:
-		smp_call_function_single(cpu, nmi_cpu_stop, NULL, 1);
-		break;
-	}
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block oprofile_cpu_nb = {
-	.notifier_call = oprofile_cpu_notifier
-};
-#endif
-
-#ifdef CONFIG_PM
-
-static int nmi_suspend(struct sys_device *dev, pm_message_t state)
-{
-	/* Only one CPU left, just stop that one */
-	if (nmi_enabled == 1)
-		nmi_cpu_stop(NULL);
-	return 0;
-}
-
-static int nmi_resume(struct sys_device *dev)
-{
-	if (nmi_enabled == 1)
-		nmi_cpu_start(NULL);
-	return 0;
-}
-
-static struct sysdev_class oprofile_sysclass = {
-	.name		= "oprofile",
-	.resume		= nmi_resume,
-	.suspend	= nmi_suspend,
-};
-
-static struct sys_device device_oprofile = {
-	.id	= 0,
-	.cls	= &oprofile_sysclass,
-};
-
-static int __init init_sysfs(void)
-{
-	int error;
-
-	error = sysdev_class_register(&oprofile_sysclass);
-	if (!error)
-		error = sysdev_register(&device_oprofile);
-	return error;
-}
-
-static void exit_sysfs(void)
-{
-	sysdev_unregister(&device_oprofile);
-	sysdev_class_unregister(&oprofile_sysclass);
-}
-
-#else
-#define init_sysfs() do { } while (0)
-#define exit_sysfs() do { } while (0)
-#endif /* CONFIG_PM */
-
 static int profile_exceptions_notify(struct notifier_block *self,
 				     unsigned long val, void *data)
 {
@@ -361,6 +285,77 @@
 	return 0;
 }
 
+#ifdef CONFIG_SMP
+static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
+				 void *data)
+{
+	int cpu = (unsigned long)data;
+	switch (action) {
+	case CPU_DOWN_FAILED:
+	case CPU_ONLINE:
+		smp_call_function_single(cpu, nmi_cpu_start, NULL, 0);
+		break;
+	case CPU_DOWN_PREPARE:
+		smp_call_function_single(cpu, nmi_cpu_stop, NULL, 1);
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block oprofile_cpu_nb = {
+	.notifier_call = oprofile_cpu_notifier
+};
+#endif
+
+#ifdef CONFIG_PM
+
+static int nmi_suspend(struct sys_device *dev, pm_message_t state)
+{
+	/* Only one CPU left, just stop that one */
+	if (nmi_enabled == 1)
+		nmi_cpu_stop(NULL);
+	return 0;
+}
+
+static int nmi_resume(struct sys_device *dev)
+{
+	if (nmi_enabled == 1)
+		nmi_cpu_start(NULL);
+	return 0;
+}
+
+static struct sysdev_class oprofile_sysclass = {
+	.name		= "oprofile",
+	.resume		= nmi_resume,
+	.suspend	= nmi_suspend,
+};
+
+static struct sys_device device_oprofile = {
+	.id	= 0,
+	.cls	= &oprofile_sysclass,
+};
+
+static int __init init_sysfs(void)
+{
+	int error;
+
+	error = sysdev_class_register(&oprofile_sysclass);
+	if (!error)
+		error = sysdev_register(&device_oprofile);
+	return error;
+}
+
+static void exit_sysfs(void)
+{
+	sysdev_unregister(&device_oprofile);
+	sysdev_class_unregister(&oprofile_sysclass);
+}
+
+#else
+#define init_sysfs() do { } while (0)
+#define exit_sysfs() do { } while (0)
+#endif /* CONFIG_PM */
+
 static int p4force;
 module_param(p4force, int, 0);
 
@@ -420,9 +415,6 @@
 	case 15: case 23:
 		*cpu_type = "i386/core_2";
 		break;
-	case 26:
-		*cpu_type = "i386/core_2";
-		break;
 	default:
 		/* Unknown */
 		return 0;
@@ -432,6 +424,16 @@
 	return 1;
 }
 
+static int __init arch_perfmon_init(char **cpu_type)
+{
+	if (!cpu_has_arch_perfmon)
+		return 0;
+	*cpu_type = "i386/arch_perfmon";
+	model = &op_arch_perfmon_spec;
+	arch_perfmon_setup_counters();
+	return 1;
+}
+
 /* in order to get sysfs right */
 static int using_nmi;
 
@@ -439,7 +441,7 @@
 {
 	__u8 vendor = boot_cpu_data.x86_vendor;
 	__u8 family = boot_cpu_data.x86;
-	char *cpu_type;
+	char *cpu_type = NULL;
 	int ret = 0;
 
 	if (!cpu_has_apic)
@@ -477,19 +479,20 @@
 		switch (family) {
 			/* Pentium IV */
 		case 0xf:
-			if (!p4_init(&cpu_type))
-				return -ENODEV;
+			p4_init(&cpu_type);
 			break;
 
 			/* A P6-class processor */
 		case 6:
-			if (!ppro_init(&cpu_type))
-				return -ENODEV;
+			ppro_init(&cpu_type);
 			break;
 
 		default:
-			return -ENODEV;
+			break;
 		}
+
+		if (!cpu_type && !arch_perfmon_init(&cpu_type))
+			return -ENODEV;
 		break;
 
 	default:
diff --git a/arch/x86/oprofile/op_counter.h b/arch/x86/oprofile/op_counter.h
index 2880b15..91b6a11 100644
--- a/arch/x86/oprofile/op_counter.h
+++ b/arch/x86/oprofile/op_counter.h
@@ -6,22 +6,22 @@
  *
  * @author John Levon
  */
- 
+
 #ifndef OP_COUNTER_H
 #define OP_COUNTER_H
- 
+
 #define OP_MAX_COUNTER 8
- 
+
 /* Per-perfctr configuration as set via
  * oprofilefs.
  */
 struct op_counter_config {
-        unsigned long count;
-        unsigned long enabled;
-        unsigned long event;
-        unsigned long kernel;
-        unsigned long user;
-        unsigned long unit_mask;
+	unsigned long count;
+	unsigned long enabled;
+	unsigned long event;
+	unsigned long kernel;
+	unsigned long user;
+	unsigned long unit_mask;
 };
 
 extern struct op_counter_config counter_config[];
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index d9faf60..5095137 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -67,8 +67,9 @@
 
 /* The function interface needs to be fixed, something like add
    data. Should then be added to linux/oprofile.h. */
-extern void oprofile_add_ibs_sample(struct pt_regs *const regs,
-				    unsigned int * const ibs_sample, u8 code);
+extern void
+oprofile_add_ibs_sample(struct pt_regs *const regs,
+			unsigned int *const ibs_sample, int ibs_code);
 
 struct ibs_fetch_sample {
 	/* MSRC001_1031 IBS Fetch Linear Address Register */
@@ -309,12 +310,15 @@
 #ifdef CONFIG_OPROFILE_IBS
 	if (ibs_allowed && ibs_config.fetch_enabled) {
 		low = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF;
-		high = IBS_FETCH_HIGH_ENABLE;
+		high = ((ibs_config.rand_en & 0x1) << 25) /* bit 57 */
+			+ IBS_FETCH_HIGH_ENABLE;
 		wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
 	}
 
 	if (ibs_allowed && ibs_config.op_enabled) {
-		low = ((ibs_config.max_cnt_op >> 4) & 0xFFFF) + IBS_OP_LOW_ENABLE;
+		low = ((ibs_config.max_cnt_op >> 4) & 0xFFFF)
+			+ ((ibs_config.dispatched_ops & 0x1) << 19) /* bit 19 */
+			+ IBS_OP_LOW_ENABLE;
 		high = 0;
 		wrmsr(MSR_AMD64_IBSOPCTL, low, high);
 	}
@@ -468,11 +472,10 @@
 		on_each_cpu(apic_clear_ibs_nmi_per_cpu, NULL, 1);
 }
 
-static int (*create_arch_files)(struct super_block * sb, struct dentry * root);
+static int (*create_arch_files)(struct super_block *sb, struct dentry *root);
 
-static int setup_ibs_files(struct super_block * sb, struct dentry * root)
+static int setup_ibs_files(struct super_block *sb, struct dentry *root)
 {
-	char buf[12];
 	struct dentry *dir;
 	int ret = 0;
 
@@ -494,22 +497,22 @@
 	ibs_config.max_cnt_op = 250000;
 	ibs_config.op_enabled = 0;
 	ibs_config.dispatched_ops = 1;
-	snprintf(buf,  sizeof(buf), "ibs_fetch");
-	dir = oprofilefs_mkdir(sb, root, buf);
+
+	dir = oprofilefs_mkdir(sb, root, "ibs_fetch");
+	oprofilefs_create_ulong(sb, dir, "enable",
+				&ibs_config.fetch_enabled);
+	oprofilefs_create_ulong(sb, dir, "max_count",
+				&ibs_config.max_cnt_fetch);
 	oprofilefs_create_ulong(sb, dir, "rand_enable",
 				&ibs_config.rand_en);
+
+	dir = oprofilefs_mkdir(sb, root, "ibs_op");
 	oprofilefs_create_ulong(sb, dir, "enable",
-		&ibs_config.fetch_enabled);
+				&ibs_config.op_enabled);
 	oprofilefs_create_ulong(sb, dir, "max_count",
-		&ibs_config.max_cnt_fetch);
-	snprintf(buf,  sizeof(buf), "ibs_uops");
-	dir = oprofilefs_mkdir(sb, root, buf);
-	oprofilefs_create_ulong(sb, dir, "enable",
-		&ibs_config.op_enabled);
-	oprofilefs_create_ulong(sb, dir, "max_count",
-		&ibs_config.max_cnt_op);
+				&ibs_config.max_cnt_op);
 	oprofilefs_create_ulong(sb, dir, "dispatched_ops",
-		&ibs_config.dispatched_ops);
+				&ibs_config.dispatched_ops);
 
 	return 0;
 }
@@ -530,14 +533,14 @@
 #endif
 
 struct op_x86_model_spec const op_amd_spec = {
-	.init = op_amd_init,
-	.exit = op_amd_exit,
-	.num_counters = NUM_COUNTERS,
-	.num_controls = NUM_CONTROLS,
-	.fill_in_addresses = &op_amd_fill_in_addresses,
-	.setup_ctrs = &op_amd_setup_ctrs,
-	.check_ctrs = &op_amd_check_ctrs,
-	.start = &op_amd_start,
-	.stop = &op_amd_stop,
-	.shutdown = &op_amd_shutdown
+	.init			= op_amd_init,
+	.exit			= op_amd_exit,
+	.num_counters		= NUM_COUNTERS,
+	.num_controls		= NUM_CONTROLS,
+	.fill_in_addresses	= &op_amd_fill_in_addresses,
+	.setup_ctrs		= &op_amd_setup_ctrs,
+	.check_ctrs		= &op_amd_check_ctrs,
+	.start			= &op_amd_start,
+	.stop			= &op_amd_stop,
+	.shutdown		= &op_amd_shutdown
 };
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 43ac5af..4c4a51c 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -698,24 +698,24 @@
 
 #ifdef CONFIG_SMP
 struct op_x86_model_spec const op_p4_ht2_spec = {
-	.num_counters = NUM_COUNTERS_HT2,
-	.num_controls = NUM_CONTROLS_HT2,
-	.fill_in_addresses = &p4_fill_in_addresses,
-	.setup_ctrs = &p4_setup_ctrs,
-	.check_ctrs = &p4_check_ctrs,
-	.start = &p4_start,
-	.stop = &p4_stop,
-	.shutdown = &p4_shutdown
+	.num_counters		= NUM_COUNTERS_HT2,
+	.num_controls		= NUM_CONTROLS_HT2,
+	.fill_in_addresses	= &p4_fill_in_addresses,
+	.setup_ctrs		= &p4_setup_ctrs,
+	.check_ctrs		= &p4_check_ctrs,
+	.start			= &p4_start,
+	.stop			= &p4_stop,
+	.shutdown		= &p4_shutdown
 };
 #endif
 
 struct op_x86_model_spec const op_p4_spec = {
-	.num_counters = NUM_COUNTERS_NON_HT,
-	.num_controls = NUM_CONTROLS_NON_HT,
-	.fill_in_addresses = &p4_fill_in_addresses,
-	.setup_ctrs = &p4_setup_ctrs,
-	.check_ctrs = &p4_check_ctrs,
-	.start = &p4_start,
-	.stop = &p4_stop,
-	.shutdown = &p4_shutdown
+	.num_counters		= NUM_COUNTERS_NON_HT,
+	.num_controls		= NUM_CONTROLS_NON_HT,
+	.fill_in_addresses	= &p4_fill_in_addresses,
+	.setup_ctrs		= &p4_setup_ctrs,
+	.check_ctrs		= &p4_check_ctrs,
+	.start			= &p4_start,
+	.stop			= &p4_stop,
+	.shutdown		= &p4_shutdown
 };
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index eff431f..0620d6d 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -1,32 +1,34 @@
 /*
  * @file op_model_ppro.h
- * pentium pro / P6 model-specific MSR operations
+ * Family 6 perfmon and architectural perfmon MSR operations
  *
  * @remark Copyright 2002 OProfile authors
+ * @remark Copyright 2008 Intel Corporation
  * @remark Read the file COPYING
  *
  * @author John Levon
  * @author Philippe Elie
  * @author Graydon Hoare
+ * @author Andi Kleen
  */
 
 #include <linux/oprofile.h>
+#include <linux/slab.h>
 #include <asm/ptrace.h>
 #include <asm/msr.h>
 #include <asm/apic.h>
 #include <asm/nmi.h>
+#include <asm/intel_arch_perfmon.h>
 
 #include "op_x86_model.h"
 #include "op_counter.h"
 
-#define NUM_COUNTERS 2
-#define NUM_CONTROLS 2
+static int num_counters = 2;
+static int counter_width = 32;
 
 #define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
 #define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
-#define CTR_32BIT_WRITE(l, msrs, c)	\
-	do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), 0); } while (0)
-#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
+#define CTR_OVERFLOWED(n) (!((n) & (1U<<(counter_width-1))))
 
 #define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
 #define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
@@ -40,20 +42,20 @@
 #define CTRL_SET_UM(val, m) (val |= (m << 8))
 #define CTRL_SET_EVENT(val, e) (val |= e)
 
-static unsigned long reset_value[NUM_COUNTERS];
+static u64 *reset_value;
 
 static void ppro_fill_in_addresses(struct op_msrs * const msrs)
 {
 	int i;
 
-	for (i = 0; i < NUM_COUNTERS; i++) {
+	for (i = 0; i < num_counters; i++) {
 		if (reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
 			msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
 		else
 			msrs->counters[i].addr = 0;
 	}
 
-	for (i = 0; i < NUM_CONTROLS; i++) {
+	for (i = 0; i < num_counters; i++) {
 		if (reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i))
 			msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
 		else
@@ -67,8 +69,22 @@
 	unsigned int low, high;
 	int i;
 
+	if (!reset_value) {
+		reset_value = kmalloc(sizeof(unsigned) * num_counters,
+					GFP_ATOMIC);
+		if (!reset_value)
+			return;
+	}
+
+	if (cpu_has_arch_perfmon) {
+		union cpuid10_eax eax;
+		eax.full = cpuid_eax(0xa);
+		if (counter_width < eax.split.bit_width)
+			counter_width = eax.split.bit_width;
+	}
+
 	/* clear all counters */
-	for (i = 0 ; i < NUM_CONTROLS; ++i) {
+	for (i = 0 ; i < num_counters; ++i) {
 		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
 			continue;
 		CTRL_READ(low, high, msrs, i);
@@ -77,18 +93,18 @@
 	}
 
 	/* avoid a false detection of ctr overflows in NMI handler */
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (unlikely(!CTR_IS_RESERVED(msrs, i)))
 			continue;
-		CTR_32BIT_WRITE(1, msrs, i);
+		wrmsrl(msrs->counters[i].addr, -1LL);
 	}
 
 	/* enable active counters */
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
 			reset_value[i] = counter_config[i].count;
 
-			CTR_32BIT_WRITE(counter_config[i].count, msrs, i);
+			wrmsrl(msrs->counters[i].addr, -reset_value[i]);
 
 			CTRL_READ(low, high, msrs, i);
 			CTRL_CLEAR(low);
@@ -111,13 +127,13 @@
 	unsigned int low, high;
 	int i;
 
-	for (i = 0 ; i < NUM_COUNTERS; ++i) {
+	for (i = 0 ; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
 		CTR_READ(low, high, msrs, i);
 		if (CTR_OVERFLOWED(low)) {
 			oprofile_add_sample(regs, i);
-			CTR_32BIT_WRITE(reset_value[i], msrs, i);
+			wrmsrl(msrs->counters[i].addr, -reset_value[i]);
 		}
 	}
 
@@ -141,7 +157,7 @@
 	unsigned int low, high;
 	int i;
 
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (reset_value[i]) {
 			CTRL_READ(low, high, msrs, i);
 			CTRL_SET_ACTIVE(low);
@@ -156,7 +172,7 @@
 	unsigned int low, high;
 	int i;
 
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
 		CTRL_READ(low, high, msrs, i);
@@ -169,24 +185,70 @@
 {
 	int i;
 
-	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+	for (i = 0 ; i < num_counters ; ++i) {
 		if (CTR_IS_RESERVED(msrs, i))
 			release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
 	}
-	for (i = 0 ; i < NUM_CONTROLS ; ++i) {
+	for (i = 0 ; i < num_counters ; ++i) {
 		if (CTRL_IS_RESERVED(msrs, i))
 			release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
 	}
+	if (reset_value) {
+		kfree(reset_value);
+		reset_value = NULL;
+	}
 }
 
 
-struct op_x86_model_spec const op_ppro_spec = {
-	.num_counters = NUM_COUNTERS,
-	.num_controls = NUM_CONTROLS,
-	.fill_in_addresses = &ppro_fill_in_addresses,
-	.setup_ctrs = &ppro_setup_ctrs,
-	.check_ctrs = &ppro_check_ctrs,
-	.start = &ppro_start,
-	.stop = &ppro_stop,
-	.shutdown = &ppro_shutdown
+struct op_x86_model_spec op_ppro_spec = {
+	.num_counters		= 2,	/* can be overriden */
+	.num_controls		= 2,	/* dito */
+	.fill_in_addresses	= &ppro_fill_in_addresses,
+	.setup_ctrs		= &ppro_setup_ctrs,
+	.check_ctrs		= &ppro_check_ctrs,
+	.start			= &ppro_start,
+	.stop			= &ppro_stop,
+	.shutdown		= &ppro_shutdown
+};
+
+/*
+ * Architectural performance monitoring.
+ *
+ * Newer Intel CPUs (Core1+) have support for architectural
+ * events described in CPUID 0xA. See the IA32 SDM Vol3b.18 for details.
+ * The advantage of this is that it can be done without knowing about
+ * the specific CPU.
+ */
+
+void arch_perfmon_setup_counters(void)
+{
+	union cpuid10_eax eax;
+
+	eax.full = cpuid_eax(0xa);
+
+	/* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */
+	if (eax.split.version_id == 0 && current_cpu_data.x86 == 6 &&
+		current_cpu_data.x86_model == 15) {
+		eax.split.version_id = 2;
+		eax.split.num_counters = 2;
+		eax.split.bit_width = 40;
+	}
+
+	num_counters = eax.split.num_counters;
+
+	op_arch_perfmon_spec.num_counters = num_counters;
+	op_arch_perfmon_spec.num_controls = num_counters;
+	op_ppro_spec.num_counters = num_counters;
+	op_ppro_spec.num_controls = num_counters;
+}
+
+struct op_x86_model_spec op_arch_perfmon_spec = {
+	/* num_counters/num_controls filled in at runtime */
+	.fill_in_addresses	= &ppro_fill_in_addresses,
+	/* user space does the cpuid check for available events */
+	.setup_ctrs		= &ppro_setup_ctrs,
+	.check_ctrs		= &ppro_check_ctrs,
+	.start			= &ppro_start,
+	.stop			= &ppro_stop,
+	.shutdown		= &ppro_shutdown
 };
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 05a0261..825e790 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -22,8 +22,8 @@
 };
 
 struct op_msrs {
-	struct op_msr * counters;
-	struct op_msr * controls;
+	struct op_msr *counters;
+	struct op_msr *controls;
 };
 
 struct pt_regs;
@@ -34,8 +34,8 @@
 struct op_x86_model_spec {
 	int (*init)(struct oprofile_operations *ops);
 	void (*exit)(void);
-	unsigned int const num_counters;
-	unsigned int const num_controls;
+	unsigned int num_counters;
+	unsigned int num_controls;
 	void (*fill_in_addresses)(struct op_msrs * const msrs);
 	void (*setup_ctrs)(struct op_msrs const * const msrs);
 	int (*check_ctrs)(struct pt_regs * const regs,
@@ -45,9 +45,12 @@
 	void (*shutdown)(struct op_msrs const * const msrs);
 };
 
-extern struct op_x86_model_spec const op_ppro_spec;
+extern struct op_x86_model_spec op_ppro_spec;
 extern struct op_x86_model_spec const op_p4_spec;
 extern struct op_x86_model_spec const op_p4_ht2_spec;
 extern struct op_x86_model_spec const op_amd_spec;
+extern struct op_x86_model_spec op_arch_perfmon_spec;
+
+extern void arch_perfmon_setup_counters(void);
 
 #endif /* OP_X86_MODEL_H */
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index a213260..6c873dc 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -64,7 +64,12 @@
 	default XTENSA_VARIANT_FSF
 
 config XTENSA_VARIANT_FSF
-	bool "fsf"
+	bool "fsf - default (not generic) configuration"
+
+config XTENSA_VARIANT_DC232B
+	bool "dc232b - Diamond 232L Standard Core Rev.B (LE)"
+	help
+	This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE).
 endchoice
 
 config MMU
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 4bd1e14..015b6b2 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -14,6 +14,7 @@
 # (Use VAR=<xtensa_config> to use another default compiler.)
 
 variant-$(CONFIG_XTENSA_VARIANT_FSF)		:= fsf
+variant-$(CONFIG_XTENSA_VARIANT_DC232B)		:= dc232b
 variant-$(CONFIG_XTENSA_VARIANT_LINUX_CUSTOM)	:= custom
 
 VARIANT = $(variant-y)
diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c
index c9ea73b..5fbcde5 100644
--- a/arch/xtensa/kernel/irq.c
+++ b/arch/xtensa/kernel/irq.c
@@ -48,7 +48,7 @@
 
 	if (irq >= NR_IRQS) {
 		printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
-				__FUNCTION__, irq);
+				__func__, irq);
 	}
 
 	irq_enter();
diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c
index a2e2522..11a20ad 100644
--- a/arch/xtensa/platforms/iss/network.c
+++ b/arch/xtensa/platforms/iss/network.c
@@ -640,7 +640,7 @@
 	*lp = ((struct iss_net_private) {
 		.device_list		= LIST_HEAD_INIT(lp->device_list),
 		.opened_list		= LIST_HEAD_INIT(lp->opened_list),
-		.lock			= SPIN_LOCK_UNLOCKED,
+		.lock			= __SPIN_LOCK_UNLOCKED(lp.lock),
 		.dev			= dev,
 		.index			= index,
 		//.fd                   = -1,
diff --git a/block/bsg.c b/block/bsg.c
index 034112b..e8bd247 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -173,7 +173,7 @@
 
 static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq,
 				struct sg_io_v4 *hdr, struct bsg_device *bd,
-				int has_write_perm)
+				fmode_t has_write_perm)
 {
 	if (hdr->request_len > BLK_MAX_CDB) {
 		rq->cmd = kzalloc(hdr->request_len, GFP_KERNEL);
@@ -242,7 +242,7 @@
  * map sg_io_v4 to a request.
  */
 static struct request *
-bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, int has_write_perm)
+bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, fmode_t has_write_perm)
 {
 	struct request_queue *q = bd->queue;
 	struct request *rq, *next_rq = NULL;
@@ -601,7 +601,8 @@
 }
 
 static int __bsg_write(struct bsg_device *bd, const char __user *buf,
-		       size_t count, ssize_t *bytes_written, int has_write_perm)
+		       size_t count, ssize_t *bytes_written,
+		       fmode_t has_write_perm)
 {
 	struct bsg_command *bc;
 	struct request *rq;
@@ -913,7 +914,7 @@
 	case SG_EMULATED_HOST:
 	case SCSI_IOCTL_SEND_COMMAND: {
 		void __user *uarg = (void __user *) arg;
-		return scsi_cmd_ioctl(file, bd->queue, NULL, cmd, uarg);
+		return scsi_cmd_ioctl(bd->queue, NULL, file->f_mode, cmd, uarg);
 	}
 	case SG_IO: {
 		struct request *rq;
diff --git a/block/cmd-filter.c b/block/cmd-filter.c
index e669aed..504b275 100644
--- a/block/cmd-filter.c
+++ b/block/cmd-filter.c
@@ -27,7 +27,7 @@
 #include <linux/cdrom.h>
 
 int blk_verify_command(struct blk_cmd_filter *filter,
-		       unsigned char *cmd, int has_write_perm)
+		       unsigned char *cmd, fmode_t has_write_perm)
 {
 	/* root can do any command. */
 	if (capable(CAP_SYS_RAWIO))
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index 1e559fb..3d3e7a4 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -71,8 +71,8 @@
 	return ret;
 }
 
-static int compat_hdio_ioctl(struct inode *inode, struct file *file,
-		struct gendisk *disk, unsigned int cmd, unsigned long arg)
+static int compat_hdio_ioctl(struct block_device *bdev, fmode_t mode,
+		unsigned int cmd, unsigned long arg)
 {
 	mm_segment_t old_fs = get_fs();
 	unsigned long kval;
@@ -80,7 +80,7 @@
 	int error;
 
 	set_fs(KERNEL_DS);
-	error = blkdev_driver_ioctl(inode, file, disk,
+	error = __blkdev_driver_ioctl(bdev, mode,
 				cmd, (unsigned long)(&kval));
 	set_fs(old_fs);
 
@@ -111,8 +111,8 @@
 	compat_caddr_t	reserved[1];
 };
 
-static int compat_cdrom_read_audio(struct inode *inode, struct file *file,
-		struct gendisk *disk, unsigned int cmd, unsigned long arg)
+static int compat_cdrom_read_audio(struct block_device *bdev, fmode_t mode,
+		unsigned int cmd, unsigned long arg)
 {
 	struct cdrom_read_audio __user *cdread_audio;
 	struct compat_cdrom_read_audio __user *cdread_audio32;
@@ -134,12 +134,12 @@
 	if (put_user(datap, &cdread_audio->buf))
 		return -EFAULT;
 
-	return blkdev_driver_ioctl(inode, file, disk, cmd,
+	return __blkdev_driver_ioctl(bdev, mode, cmd,
 			(unsigned long)cdread_audio);
 }
 
-static int compat_cdrom_generic_command(struct inode *inode, struct file *file,
-		struct gendisk *disk, unsigned int cmd, unsigned long arg)
+static int compat_cdrom_generic_command(struct block_device *bdev, fmode_t mode,
+		unsigned int cmd, unsigned long arg)
 {
 	struct cdrom_generic_command __user *cgc;
 	struct compat_cdrom_generic_command __user *cgc32;
@@ -167,7 +167,7 @@
 	    put_user(compat_ptr(data), &cgc->reserved[0]))
 		return -EFAULT;
 
-	return blkdev_driver_ioctl(inode, file, disk, cmd, (unsigned long)cgc);
+	return __blkdev_driver_ioctl(bdev, mode, cmd, (unsigned long)cgc);
 }
 
 struct compat_blkpg_ioctl_arg {
@@ -177,7 +177,7 @@
 	compat_caddr_t data;
 };
 
-static int compat_blkpg_ioctl(struct inode *inode, struct file *file,
+static int compat_blkpg_ioctl(struct block_device *bdev, fmode_t mode,
 		unsigned int cmd, struct compat_blkpg_ioctl_arg __user *ua32)
 {
 	struct blkpg_ioctl_arg __user *a = compat_alloc_user_space(sizeof(*a));
@@ -196,7 +196,7 @@
 	if (err)
 		return err;
 
-	return blkdev_ioctl(inode, file, cmd, (unsigned long)a);
+	return blkdev_ioctl(bdev, mode, cmd, (unsigned long)a);
 }
 
 #define BLKBSZGET_32		_IOR(0x12, 112, int)
@@ -308,8 +308,8 @@
 
 #define NR_FD_IOCTL_TRANS ARRAY_SIZE(fd_ioctl_trans_table)
 
-static int compat_fd_ioctl(struct inode *inode, struct file *file,
-		struct gendisk *disk, unsigned int cmd, unsigned long arg)
+static int compat_fd_ioctl(struct block_device *bdev, fmode_t mode,
+		unsigned int cmd, unsigned long arg)
 {
 	mm_segment_t old_fs = get_fs();
 	void *karg = NULL;
@@ -413,7 +413,7 @@
 		return -EINVAL;
 	}
 	set_fs(KERNEL_DS);
-	err = blkdev_driver_ioctl(inode, file, disk, kcmd, (unsigned long)karg);
+	err = __blkdev_driver_ioctl(bdev, mode, kcmd, (unsigned long)karg);
 	set_fs(old_fs);
 	if (err)
 		goto out;
@@ -579,11 +579,9 @@
 	return 0;
 }
 
-static int compat_blkdev_driver_ioctl(struct inode *inode, struct file *file,
-			struct gendisk *disk, unsigned cmd, unsigned long arg)
+static int compat_blkdev_driver_ioctl(struct block_device *bdev, fmode_t mode,
+			unsigned cmd, unsigned long arg)
 {
-	int ret;
-
 	switch (cmd) {
 	case HDIO_GET_UNMASKINTR:
 	case HDIO_GET_MULTCOUNT:
@@ -596,7 +594,7 @@
 	case HDIO_GET_ACOUSTIC:
 	case HDIO_GET_ADDRESS:
 	case HDIO_GET_BUSSTATE:
-		return compat_hdio_ioctl(inode, file, disk, cmd, arg);
+		return compat_hdio_ioctl(bdev, mode, cmd, arg);
 	case FDSETPRM32:
 	case FDDEFPRM32:
 	case FDGETPRM32:
@@ -606,11 +604,11 @@
 	case FDPOLLDRVSTAT32:
 	case FDGETFDCSTAT32:
 	case FDWERRORGET32:
-		return compat_fd_ioctl(inode, file, disk, cmd, arg);
+		return compat_fd_ioctl(bdev, mode, cmd, arg);
 	case CDROMREADAUDIO:
-		return compat_cdrom_read_audio(inode, file, disk, cmd, arg);
+		return compat_cdrom_read_audio(bdev, mode, cmd, arg);
 	case CDROM_SEND_PACKET:
-		return compat_cdrom_generic_command(inode, file, disk, cmd, arg);
+		return compat_cdrom_generic_command(bdev, mode, cmd, arg);
 
 	/*
 	 * No handler required for the ones below, we just need to
@@ -679,55 +677,49 @@
 	case DVD_WRITE_STRUCT:
 	case DVD_AUTH:
 		arg = (unsigned long)compat_ptr(arg);
-	/* These intepret arg as an unsigned long, not as a pointer,
-	 * so we must not do compat_ptr() conversion. */
-	case HDIO_SET_MULTCOUNT:
-	case HDIO_SET_UNMASKINTR:
-	case HDIO_SET_KEEPSETTINGS:
-	case HDIO_SET_32BIT:
-	case HDIO_SET_NOWERR:
-	case HDIO_SET_DMA:
-	case HDIO_SET_PIO_MODE:
-	case HDIO_SET_NICE:
-	case HDIO_SET_WCACHE:
-	case HDIO_SET_ACOUSTIC:
-	case HDIO_SET_BUSSTATE:
-	case HDIO_SET_ADDRESS:
-	case CDROMEJECT_SW:
-	case CDROM_SET_OPTIONS:
-	case CDROM_CLEAR_OPTIONS:
-	case CDROM_SELECT_SPEED:
-	case CDROM_SELECT_DISC:
-	case CDROM_MEDIA_CHANGED:
-	case CDROM_DRIVE_STATUS:
-	case CDROM_LOCKDOOR:
-	case CDROM_DEBUG:
 		break;
 	default:
 		/* unknown ioctl number */
 		return -ENOIOCTLCMD;
 	}
 
-	if (disk->fops->unlocked_ioctl)
-		return disk->fops->unlocked_ioctl(file, cmd, arg);
-
-	if (disk->fops->ioctl) {
-		lock_kernel();
-		ret = disk->fops->ioctl(inode, file, cmd, arg);
-		unlock_kernel();
-		return ret;
-	}
-
-	return -ENOTTY;
+	return __blkdev_driver_ioctl(bdev, mode, cmd, arg);
 }
 
-static int compat_blkdev_locked_ioctl(struct inode *inode, struct file *file,
-				struct block_device *bdev,
-				unsigned cmd, unsigned long arg)
+/* Most of the generic ioctls are handled in the normal fallback path.
+   This assumes the blkdev's low level compat_ioctl always returns
+   ENOIOCTLCMD for unknown ioctls. */
+long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 {
+	int ret = -ENOIOCTLCMD;
+	struct inode *inode = file->f_mapping->host;
+	struct block_device *bdev = inode->i_bdev;
+	struct gendisk *disk = bdev->bd_disk;
+	fmode_t mode = file->f_mode;
 	struct backing_dev_info *bdi;
+	loff_t size;
+
+	if (file->f_flags & O_NDELAY)
+		mode |= FMODE_NDELAY_NOW;
 
 	switch (cmd) {
+	case HDIO_GETGEO:
+		return compat_hdio_getgeo(disk, bdev, compat_ptr(arg));
+	case BLKFLSBUF:
+	case BLKROSET:
+	case BLKDISCARD:
+	/*
+	 * the ones below are implemented in blkdev_locked_ioctl,
+	 * but we call blkdev_ioctl, which gets the lock for us
+	 */
+	case BLKRRPART:
+		return blkdev_ioctl(bdev, mode, cmd,
+				(unsigned long)compat_ptr(arg));
+	case BLKBSZSET_32:
+		return blkdev_ioctl(bdev, mode, BLKBSZSET,
+				(unsigned long)compat_ptr(arg));
+	case BLKPG:
+		return compat_blkpg_ioctl(bdev, mode, cmd, compat_ptr(arg));
 	case BLKRAGET:
 	case BLKFRAGET:
 		if (!arg)
@@ -753,65 +745,36 @@
 		bdi = blk_get_backing_dev_info(bdev);
 		if (bdi == NULL)
 			return -ENOTTY;
+		lock_kernel();
 		bdi->ra_pages = (arg * 512) / PAGE_CACHE_SIZE;
+		unlock_kernel();
 		return 0;
 	case BLKGETSIZE:
-		if ((bdev->bd_inode->i_size >> 9) > ~0UL)
+		size = bdev->bd_inode->i_size;
+		if ((size >> 9) > ~0UL)
 			return -EFBIG;
-		return compat_put_ulong(arg, bdev->bd_inode->i_size >> 9);
+		return compat_put_ulong(arg, size >> 9);
 
 	case BLKGETSIZE64_32:
 		return compat_put_u64(arg, bdev->bd_inode->i_size);
 
 	case BLKTRACESETUP32:
-		return compat_blk_trace_setup(bdev, compat_ptr(arg));
+		lock_kernel();
+		ret = compat_blk_trace_setup(bdev, compat_ptr(arg));
+		unlock_kernel();
+		return ret;
 	case BLKTRACESTART: /* compatible */
 	case BLKTRACESTOP:  /* compatible */
 	case BLKTRACETEARDOWN: /* compatible */
-		return blk_trace_ioctl(bdev, cmd, compat_ptr(arg));
-	}
-	return -ENOIOCTLCMD;
-}
-
-/* Most of the generic ioctls are handled in the normal fallback path.
-   This assumes the blkdev's low level compat_ioctl always returns
-   ENOIOCTLCMD for unknown ioctls. */
-long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
-{
-	int ret = -ENOIOCTLCMD;
-	struct inode *inode = file->f_mapping->host;
-	struct block_device *bdev = inode->i_bdev;
-	struct gendisk *disk = bdev->bd_disk;
-
-	switch (cmd) {
-	case HDIO_GETGEO:
-		return compat_hdio_getgeo(disk, bdev, compat_ptr(arg));
-	case BLKFLSBUF:
-	case BLKROSET:
-	case BLKDISCARD:
-	/*
-	 * the ones below are implemented in blkdev_locked_ioctl,
-	 * but we call blkdev_ioctl, which gets the lock for us
-	 */
-	case BLKRRPART:
-		return blkdev_ioctl(inode, file, cmd,
-				(unsigned long)compat_ptr(arg));
-	case BLKBSZSET_32:
-		return blkdev_ioctl(inode, file, BLKBSZSET,
-				(unsigned long)compat_ptr(arg));
-	case BLKPG:
-		return compat_blkpg_ioctl(inode, file, cmd, compat_ptr(arg));
-	}
-
-	lock_kernel();
-	ret = compat_blkdev_locked_ioctl(inode, file, bdev, cmd, arg);
-	/* FIXME: why do we assume -> compat_ioctl needs the BKL? */
-	if (ret == -ENOIOCTLCMD && disk->fops->compat_ioctl)
-		ret = disk->fops->compat_ioctl(file, cmd, arg);
-	unlock_kernel();
-
-	if (ret != -ENOIOCTLCMD)
+		lock_kernel();
+		ret = blk_trace_ioctl(bdev, cmd, compat_ptr(arg));
+		unlock_kernel();
 		return ret;
-
-	return compat_blkdev_driver_ioctl(inode, file, disk, cmd, arg);
+	default:
+		if (disk->fops->compat_ioctl)
+			ret = disk->fops->compat_ioctl(bdev, mode, cmd, arg);
+		if (ret == -ENOIOCTLCMD)
+			ret = compat_blkdev_driver_ioctl(bdev, mode, cmd, arg);
+		return ret;
+	}
 }
diff --git a/block/genhd.c b/block/genhd.c
index 646e1d2..4e5e749 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -10,6 +10,7 @@
 #include <linux/blkdev.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/kmod.h>
@@ -727,12 +728,24 @@
 	return 0;
 }
 
-const struct seq_operations partitions_op = {
+static const struct seq_operations partitions_op = {
 	.start	= show_partition_start,
 	.next	= disk_seqf_next,
 	.stop	= disk_seqf_stop,
 	.show	= show_partition
 };
+
+static int partitions_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &partitions_op);
+}
+
+static const struct file_operations proc_partitions_operations = {
+	.open		= partitions_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
 #endif
 
 
@@ -992,12 +1005,32 @@
 	return 0;
 }
 
-const struct seq_operations diskstats_op = {
+static const struct seq_operations diskstats_op = {
 	.start	= disk_seqf_start,
 	.next	= disk_seqf_next,
 	.stop	= disk_seqf_stop,
 	.show	= diskstats_show
 };
+
+static int diskstats_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &diskstats_op);
+}
+
+static const struct file_operations proc_diskstats_operations = {
+	.open		= diskstats_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int __init proc_genhd_init(void)
+{
+	proc_create("diskstats", 0, NULL, &proc_diskstats_operations);
+	proc_create("partitions", 0, NULL, &proc_partitions_operations);
+	return 0;
+}
+module_init(proc_genhd_init);
 #endif /* CONFIG_PROC_FS */
 
 static void media_change_notify_thread(struct work_struct *work)
diff --git a/block/ioctl.c b/block/ioctl.c
index 38bee321..c832d63 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -201,97 +201,41 @@
 	return put_user(val, (u64 __user *)arg);
 }
 
-static int blkdev_locked_ioctl(struct file *file, struct block_device *bdev,
-				unsigned cmd, unsigned long arg)
+int __blkdev_driver_ioctl(struct block_device *bdev, fmode_t mode,
+			unsigned cmd, unsigned long arg)
 {
-	struct backing_dev_info *bdi;
-	int ret, n;
-
-	switch (cmd) {
-	case BLKRAGET:
-	case BLKFRAGET:
-		if (!arg)
-			return -EINVAL;
-		bdi = blk_get_backing_dev_info(bdev);
-		if (bdi == NULL)
-			return -ENOTTY;
-		return put_long(arg, (bdi->ra_pages * PAGE_CACHE_SIZE) / 512);
-	case BLKROGET:
-		return put_int(arg, bdev_read_only(bdev) != 0);
-	case BLKBSZGET: /* get the logical block size (cf. BLKSSZGET) */
-		return put_int(arg, block_size(bdev));
-	case BLKSSZGET: /* get block device hardware sector size */
-		return put_int(arg, bdev_hardsect_size(bdev));
-	case BLKSECTGET:
-		return put_ushort(arg, bdev_get_queue(bdev)->max_sectors);
-	case BLKRASET:
-	case BLKFRASET:
-		if(!capable(CAP_SYS_ADMIN))
-			return -EACCES;
-		bdi = blk_get_backing_dev_info(bdev);
-		if (bdi == NULL)
-			return -ENOTTY;
-		bdi->ra_pages = (arg * 512) / PAGE_CACHE_SIZE;
-		return 0;
-	case BLKBSZSET:
-		/* set the logical block size */
-		if (!capable(CAP_SYS_ADMIN))
-			return -EACCES;
-		if (!arg)
-			return -EINVAL;
-		if (get_user(n, (int __user *) arg))
-			return -EFAULT;
-		if (bd_claim(bdev, file) < 0)
-			return -EBUSY;
-		ret = set_blocksize(bdev, n);
-		bd_release(bdev);
-		return ret;
-	case BLKPG:
-		return blkpg_ioctl(bdev, (struct blkpg_ioctl_arg __user *) arg);
-	case BLKRRPART:
-		return blkdev_reread_part(bdev);
-	case BLKGETSIZE:
-		if ((bdev->bd_inode->i_size >> 9) > ~0UL)
-			return -EFBIG;
-		return put_ulong(arg, bdev->bd_inode->i_size >> 9);
-	case BLKGETSIZE64:
-		return put_u64(arg, bdev->bd_inode->i_size);
-	case BLKTRACESTART:
-	case BLKTRACESTOP:
-	case BLKTRACESETUP:
-	case BLKTRACETEARDOWN:
-		return blk_trace_ioctl(bdev, cmd, (char __user *) arg);
-	}
-	return -ENOIOCTLCMD;
-}
-
-int blkdev_driver_ioctl(struct inode *inode, struct file *file,
-			struct gendisk *disk, unsigned cmd, unsigned long arg)
-{
+	struct gendisk *disk = bdev->bd_disk;
 	int ret;
-	if (disk->fops->unlocked_ioctl)
-		return disk->fops->unlocked_ioctl(file, cmd, arg);
 
-	if (disk->fops->ioctl) {
+	if (disk->fops->ioctl)
+		return disk->fops->ioctl(bdev, mode, cmd, arg);
+
+	if (disk->fops->locked_ioctl) {
 		lock_kernel();
-		ret = disk->fops->ioctl(inode, file, cmd, arg);
+		ret = disk->fops->locked_ioctl(bdev, mode, cmd, arg);
 		unlock_kernel();
 		return ret;
 	}
 
 	return -ENOTTY;
 }
-EXPORT_SYMBOL_GPL(blkdev_driver_ioctl);
+/*
+ * For the record: _GPL here is only because somebody decided to slap it
+ * on the previous export.  Sheer idiocy, since it wasn't copyrightable
+ * at all and could be open-coded without any exports by anybody who cares.
+ */
+EXPORT_SYMBOL_GPL(__blkdev_driver_ioctl);
 
 /*
  * always keep this in sync with compat_blkdev_ioctl() and
  * compat_blkdev_locked_ioctl()
  */
-int blkdev_ioctl(struct inode *inode, struct file *file, unsigned cmd,
+int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
 			unsigned long arg)
 {
-	struct block_device *bdev = inode->i_bdev;
 	struct gendisk *disk = bdev->bd_disk;
+	struct backing_dev_info *bdi;
+	loff_t size;
 	int ret, n;
 
 	switch(cmd) {
@@ -299,7 +243,7 @@
 		if (!capable(CAP_SYS_ADMIN))
 			return -EACCES;
 
-		ret = blkdev_driver_ioctl(inode, file, disk, cmd, arg);
+		ret = __blkdev_driver_ioctl(bdev, mode, cmd, arg);
 		/* -EINVAL to handle old uncorrected drivers */
 		if (ret != -EINVAL && ret != -ENOTTY)
 			return ret;
@@ -311,7 +255,7 @@
 		return 0;
 
 	case BLKROSET:
-		ret = blkdev_driver_ioctl(inode, file, disk, cmd, arg);
+		ret = __blkdev_driver_ioctl(bdev, mode, cmd, arg);
 		/* -EINVAL to handle old uncorrected drivers */
 		if (ret != -EINVAL && ret != -ENOTTY)
 			return ret;
@@ -327,7 +271,7 @@
 	case BLKDISCARD: {
 		uint64_t range[2];
 
-		if (!(file->f_mode & FMODE_WRITE))
+		if (!(mode & FMODE_WRITE))
 			return -EBADF;
 
 		if (copy_from_user(range, (void __user *)arg, sizeof(range)))
@@ -357,14 +301,75 @@
 			return -EFAULT;
 		return 0;
 	}
-	}
-
-	lock_kernel();
-	ret = blkdev_locked_ioctl(file, bdev, cmd, arg);
-	unlock_kernel();
-	if (ret != -ENOIOCTLCMD)
+	case BLKRAGET:
+	case BLKFRAGET:
+		if (!arg)
+			return -EINVAL;
+		bdi = blk_get_backing_dev_info(bdev);
+		if (bdi == NULL)
+			return -ENOTTY;
+		return put_long(arg, (bdi->ra_pages * PAGE_CACHE_SIZE) / 512);
+	case BLKROGET:
+		return put_int(arg, bdev_read_only(bdev) != 0);
+	case BLKBSZGET: /* get the logical block size (cf. BLKSSZGET) */
+		return put_int(arg, block_size(bdev));
+	case BLKSSZGET: /* get block device hardware sector size */
+		return put_int(arg, bdev_hardsect_size(bdev));
+	case BLKSECTGET:
+		return put_ushort(arg, bdev_get_queue(bdev)->max_sectors);
+	case BLKRASET:
+	case BLKFRASET:
+		if(!capable(CAP_SYS_ADMIN))
+			return -EACCES;
+		bdi = blk_get_backing_dev_info(bdev);
+		if (bdi == NULL)
+			return -ENOTTY;
+		lock_kernel();
+		bdi->ra_pages = (arg * 512) / PAGE_CACHE_SIZE;
+		unlock_kernel();
+		return 0;
+	case BLKBSZSET:
+		/* set the logical block size */
+		if (!capable(CAP_SYS_ADMIN))
+			return -EACCES;
+		if (!arg)
+			return -EINVAL;
+		if (get_user(n, (int __user *) arg))
+			return -EFAULT;
+		if (!(mode & FMODE_EXCL) && bd_claim(bdev, &bdev) < 0)
+			return -EBUSY;
+		ret = set_blocksize(bdev, n);
+		if (!(mode & FMODE_EXCL))
+			bd_release(bdev);
 		return ret;
-
-	return blkdev_driver_ioctl(inode, file, disk, cmd, arg);
+	case BLKPG:
+		lock_kernel();
+		ret = blkpg_ioctl(bdev, (struct blkpg_ioctl_arg __user *) arg);
+		unlock_kernel();
+		break;
+	case BLKRRPART:
+		lock_kernel();
+		ret = blkdev_reread_part(bdev);
+		unlock_kernel();
+		break;
+	case BLKGETSIZE:
+		size = bdev->bd_inode->i_size;
+		if ((size >> 9) > ~0UL)
+			return -EFBIG;
+		return put_ulong(arg, size >> 9);
+	case BLKGETSIZE64:
+		return put_u64(arg, bdev->bd_inode->i_size);
+	case BLKTRACESTART:
+	case BLKTRACESTOP:
+	case BLKTRACESETUP:
+	case BLKTRACETEARDOWN:
+		lock_kernel();
+		ret = blk_trace_ioctl(bdev, cmd, (char __user *) arg);
+		unlock_kernel();
+		break;
+	default:
+		ret = __blkdev_driver_ioctl(bdev, mode, cmd, arg);
+	}
+	return ret;
 }
 EXPORT_SYMBOL_GPL(blkdev_ioctl);
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index c34272a..5963cf9 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -190,12 +190,11 @@
 EXPORT_SYMBOL_GPL(blk_set_cmd_filter_defaults);
 
 static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq,
-			     struct sg_io_hdr *hdr, struct file *file)
+			     struct sg_io_hdr *hdr, fmode_t mode)
 {
 	if (copy_from_user(rq->cmd, hdr->cmdp, hdr->cmd_len))
 		return -EFAULT;
-	if (blk_verify_command(&q->cmd_filter, rq->cmd,
-			       file->f_mode & FMODE_WRITE))
+	if (blk_verify_command(&q->cmd_filter, rq->cmd, mode & FMODE_WRITE))
 		return -EPERM;
 
 	/*
@@ -260,8 +259,8 @@
 	return r;
 }
 
-static int sg_io(struct file *file, struct request_queue *q,
-		struct gendisk *bd_disk, struct sg_io_hdr *hdr)
+static int sg_io(struct request_queue *q, struct gendisk *bd_disk,
+		struct sg_io_hdr *hdr, fmode_t mode)
 {
 	unsigned long start_time;
 	int writing = 0, ret = 0;
@@ -293,7 +292,7 @@
 	if (!rq)
 		return -ENOMEM;
 
-	if (blk_fill_sghdr_rq(q, rq, hdr, file)) {
+	if (blk_fill_sghdr_rq(q, rq, hdr, mode)) {
 		blk_put_request(rq);
 		return -EFAULT;
 	}
@@ -380,11 +379,11 @@
  *      bytes in one int) where the lowest byte is the SCSI status.
  */
 #define OMAX_SB_LEN 16          /* For backward compatibility */
-int sg_scsi_ioctl(struct file *file, struct request_queue *q,
-		  struct gendisk *disk, struct scsi_ioctl_command __user *sic)
+int sg_scsi_ioctl(struct request_queue *q, struct gendisk *disk, fmode_t mode,
+		struct scsi_ioctl_command __user *sic)
 {
 	struct request *rq;
-	int err, write_perm = 0;
+	int err;
 	unsigned int in_len, out_len, bytes, opcode, cmdlen;
 	char *buffer = NULL, sense[SCSI_SENSE_BUFFERSIZE];
 
@@ -426,11 +425,7 @@
 	if (in_len && copy_from_user(buffer, sic->data + cmdlen, in_len))
 		goto error;
 
-	/* scsi_ioctl passes NULL */
-	if (file && (file->f_mode & FMODE_WRITE))
-		write_perm = 1;
-
-	err = blk_verify_command(&q->cmd_filter, rq->cmd, write_perm);
+	err = blk_verify_command(&q->cmd_filter, rq->cmd, mode & FMODE_WRITE);
 	if (err)
 		goto error;
 
@@ -522,8 +517,8 @@
 	return __blk_send_generic(q, bd_disk, GPCMD_START_STOP_UNIT, data);
 }
 
-int scsi_cmd_ioctl(struct file *file, struct request_queue *q,
-		   struct gendisk *bd_disk, unsigned int cmd, void __user *arg)
+int scsi_cmd_ioctl(struct request_queue *q, struct gendisk *bd_disk, fmode_t mode,
+		   unsigned int cmd, void __user *arg)
 {
 	int err;
 
@@ -564,7 +559,7 @@
 			err = -EFAULT;
 			if (copy_from_user(&hdr, arg, sizeof(hdr)))
 				break;
-			err = sg_io(file, q, bd_disk, &hdr);
+			err = sg_io(q, bd_disk, &hdr, mode);
 			if (err == -EFAULT)
 				break;
 
@@ -612,7 +607,7 @@
 			hdr.cmdp = ((struct cdrom_generic_command __user*) arg)->cmd;
 			hdr.cmd_len = sizeof(cgc.cmd);
 
-			err = sg_io(file, q, bd_disk, &hdr);
+			err = sg_io(q, bd_disk, &hdr, mode);
 			if (err == -EFAULT)
 				break;
 
@@ -636,7 +631,7 @@
 			if (!arg)
 				break;
 
-			err = sg_scsi_ioctl(file, q, bd_disk, arg);
+			err = sg_scsi_ioctl(q, bd_disk, mode, arg);
 			break;
 		case CDROMCLOSETRAY:
 			err = blk_send_start_stop(q, bd_disk, 0x03);
diff --git a/drivers/Kconfig b/drivers/Kconfig
index d19b6f5..d38f43f 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -78,6 +78,8 @@
 
 source "drivers/usb/Kconfig"
 
+source "drivers/uwb/Kconfig"
+
 source "drivers/mmc/Kconfig"
 
 source "drivers/memstick/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 46c8681..fceb71a 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -56,6 +56,7 @@
 obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe/
 obj-$(CONFIG_PARIDE) 		+= block/paride/
 obj-$(CONFIG_TC)		+= tc/
+obj-$(CONFIG_UWB)		+= uwb/
 obj-$(CONFIG_USB)		+= usb/
 obj-$(CONFIG_USB_MUSB_HDRC)	+= usb/musb/
 obj-$(CONFIG_PCI)		+= usb/
@@ -82,6 +83,7 @@
 obj-y				+= lguest/
 obj-$(CONFIG_CPU_FREQ)		+= cpufreq/
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle/
+obj-y				+= idle/
 obj-$(CONFIG_MMC)		+= mmc/
 obj-$(CONFIG_MEMSTICK)		+= memstick/
 obj-$(CONFIG_NEW_LEDS)		+= leds/
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index da49b00..f4f6329 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -42,7 +42,7 @@
 
 config ACPI_SLEEP
 	bool
-	depends on PM_SLEEP
+	depends on SUSPEND || HIBERNATION
 	default y
 
 config ACPI_PROCFS
@@ -157,18 +157,11 @@
 	  applications to perform basic fan control (on, off, status).
 
 config ACPI_DOCK
-	tristate "Dock"
+	bool "Dock"
 	depends on EXPERIMENTAL
 	help
-	  This driver adds support for ACPI controlled docking stations
-
-config ACPI_BAY
-	tristate "Removable Drive Bay (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	depends on ACPI_DOCK
-	help
-	  This driver adds support for ACPI controlled removable drive
-	  bays such as the IBM ultrabay or the Dell Module Bay.
+	  This driver adds support for ACPI controlled docking stations and removable
+	  drive bays such as the IBM ultrabay or the Dell Module Bay.
 
 config ACPI_PROCESSOR
 	tristate "Processor"
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 52a4cd4..d91c027 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -45,14 +45,13 @@
 obj-$(CONFIG_ACPI_BUTTON)	+= button.o
 obj-$(CONFIG_ACPI_FAN)		+= fan.o
 obj-$(CONFIG_ACPI_DOCK)		+= dock.o
-obj-$(CONFIG_ACPI_BAY)		+= bay.o
 obj-$(CONFIG_ACPI_VIDEO)	+= video.o
 obj-y				+= pci_root.o pci_link.o pci_irq.o pci_bind.o
 obj-$(CONFIG_ACPI_PCI_SLOT)	+= pci_slot.o
-obj-$(CONFIG_ACPI_POWER)	+= power.o
 obj-$(CONFIG_ACPI_PROCESSOR)	+= processor.o
 obj-$(CONFIG_ACPI_CONTAINER)	+= container.o
 obj-$(CONFIG_ACPI_THERMAL)	+= thermal.o
+obj-$(CONFIG_ACPI_POWER)	+= power.o
 obj-$(CONFIG_ACPI_SYSTEM)	+= system.o event.o
 obj-$(CONFIG_ACPI_DEBUG)	+= debug.o
 obj-$(CONFIG_ACPI_NUMA)		+= numa.o
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index 831883b..d72a1b6 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -85,7 +85,7 @@
 	struct power_supply charger;
 #endif
 	struct acpi_device * device;
-	unsigned long state;
+	unsigned long long state;
 };
 
 #define to_acpi_ac(x) container_of(x, struct acpi_ac, charger);
@@ -269,7 +269,7 @@
 	ac->device = device;
 	strcpy(acpi_device_name(device), ACPI_AC_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_AC_CLASS);
-	acpi_driver_data(device) = ac;
+	device->driver_data = ac;
 
 	result = acpi_ac_get_state(ac);
 	if (result)
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 5f1127a..71d21c5 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -194,8 +194,7 @@
 
 static int acpi_memory_check_device(struct acpi_memory_device *mem_device)
 {
-	unsigned long current_status;
-
+	unsigned long long current_status;
 
 	/* Get device present/absent information from the _STA */
 	if (ACPI_FAILURE(acpi_evaluate_integer(mem_device->device->handle, "_STA",
@@ -264,7 +263,7 @@
 	acpi_status status;
 	struct acpi_object_list arg_list;
 	union acpi_object arg;
-	unsigned long current_status;
+	unsigned long long current_status;
 
 
 	/* Issue the _EJ0 command */
@@ -403,7 +402,7 @@
 	mem_device->device = device;
 	sprintf(acpi_device_name(device), "%s", ACPI_MEMORY_DEVICE_NAME);
 	sprintf(acpi_device_class(device), "%s", ACPI_MEMORY_DEVICE_CLASS);
-	acpi_driver_data(device) = mem_device;
+	device->driver_data = mem_device;
 
 	/* Get the range from the _CRS */
 	result = acpi_memory_get_device_resources(mem_device);
@@ -454,8 +453,8 @@
 		/* call add_memory func */
 		result = acpi_memory_enable_device(mem_device);
 		if (result)
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				"Error in acpi_memory_enable_device\n"));
+			printk(KERN_ERR PREFIX
+				"Error in acpi_memory_enable_device\n");
 	}
 	return result;
 }
diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c
index d3d0886..1e74988 100644
--- a/drivers/acpi/asus_acpi.c
+++ b/drivers/acpi/asus_acpi.c
@@ -42,7 +42,7 @@
 
 #define ASUS_ACPI_VERSION "0.30"
 
-#define PROC_ASUS       "asus"	//the directory
+#define PROC_ASUS       "asus"	/* The directory */
 #define PROC_MLED       "mled"
 #define PROC_WLED       "wled"
 #define PROC_TLED       "tled"
@@ -66,10 +66,10 @@
 /*
  * Flags for hotk status
  */
-#define MLED_ON     0x01	//mail LED
-#define WLED_ON     0x02	//wireless LED
-#define TLED_ON     0x04	//touchpad LED
-#define BT_ON       0x08	//internal Bluetooth
+#define MLED_ON     0x01	/* Mail LED */
+#define WLED_ON     0x02	/* Wireless LED */
+#define TLED_ON     0x04	/* Touchpad LED */
+#define BT_ON       0x08	/* Internal Bluetooth */
 
 MODULE_AUTHOR("Julien Lerouge, Karol Kozimor");
 MODULE_DESCRIPTION(ACPI_HOTK_NAME);
@@ -82,28 +82,28 @@
 module_param(asus_gid, uint, 0);
 MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus");
 
-/* For each model, all features implemented, 
+/* For each model, all features implemented,
  * those marked with R are relative to HOTK, A for absolute */
 struct model_data {
-	char *name;		//name of the laptop________________A
-	char *mt_mled;		//method to handle mled_____________R
-	char *mled_status;	//node to handle mled reading_______A
-	char *mt_wled;		//method to handle wled_____________R
-	char *wled_status;	//node to handle wled reading_______A
-	char *mt_tled;		//method to handle tled_____________R
-	char *tled_status;	//node to handle tled reading_______A
-	char *mt_ledd;		//method to handle LED display______R
-	char *mt_bt_switch;	//method to switch Bluetooth on/off_R
-	char *bt_status;	//no model currently supports this__?
-	char *mt_lcd_switch;	//method to turn LCD on/off_________A
-	char *lcd_status;	//node to read LCD panel state______A
-	char *brightness_up;	//method to set brightness up_______A
-	char *brightness_down;	//guess what ?______________________A
-	char *brightness_set;	//method to set absolute brightness_R
-	char *brightness_get;	//method to get absolute brightness_R
-	char *brightness_status;	//node to get brightness____________A
-	char *display_set;	//method to set video output________R
-	char *display_get;	//method to get video output________R
+	char *name;		/* name of the laptop________________A */
+	char *mt_mled;		/* method to handle mled_____________R */
+	char *mled_status;	/* node to handle mled reading_______A */
+	char *mt_wled;		/* method to handle wled_____________R */
+	char *wled_status;	/* node to handle wled reading_______A */
+	char *mt_tled;		/* method to handle tled_____________R */
+	char *tled_status;	/* node to handle tled reading_______A */
+	char *mt_ledd;		/* method to handle LED display______R */
+	char *mt_bt_switch;	/* method to switch Bluetooth on/off_R */
+	char *bt_status;	/* no model currently supports this__? */
+	char *mt_lcd_switch;	/* method to turn LCD on/off_________A */
+	char *lcd_status;	/* node to read LCD panel state______A */
+	char *brightness_up;	/* method to set brightness up_______A */
+	char *brightness_down;	/* method to set brightness down ____A */
+	char *brightness_set;	/* method to set absolute brightness_R */
+	char *brightness_get;	/* method to get absolute brightness_R */
+	char *brightness_status;/* node to get brightness____________A */
+	char *display_set;	/* method to set video output________R */
+	char *display_get;	/* method to get video output________R */
 };
 
 /*
@@ -111,41 +111,41 @@
  * about the hotk device
  */
 struct asus_hotk {
-	struct acpi_device *device;	//the device we are in
-	acpi_handle handle;	//the handle of the hotk device
-	char status;		//status of the hotk, for LEDs, ...
-	u32 ledd_status;	//status of the LED display
-	struct model_data *methods;	//methods available on the laptop
-	u8 brightness;		//brightness level
+	struct acpi_device *device;	/* the device we are in */
+	acpi_handle handle;		/* the handle of the hotk device */
+	char status;			/* status of the hotk, for LEDs */
+	u32 ledd_status;		/* status of the LED display */
+	struct model_data *methods;	/* methods available on the laptop */
+	u8 brightness;			/* brightness level */
 	enum {
-		A1x = 0,	//A1340D, A1300F
-		A2x,		//A2500H
-		A4G,		//A4700G
-		D1x,		//D1
-		L2D,		//L2000D
-		L3C,		//L3800C
-		L3D,		//L3400D
-		L3H,		//L3H, L2000E, L5D
-		L4R,		//L4500R
-		L5x,		//L5800C 
-		L8L,		//L8400L
-		M1A,		//M1300A
-		M2E,		//M2400E, L4400L
-		M6N,		//M6800N, W3400N
-		M6R,		//M6700R, A3000G
-		P30,		//Samsung P30
-		S1x,		//S1300A, but also L1400B and M2400A (L84F)
-		S2x,		//S200 (J1 reported), Victor MP-XP7210
-		W1N,		//W1000N
-		W5A,		//W5A
-		W3V,            //W3030V
-		xxN,		//M2400N, M3700N, M5200N, M6800N, S1300N, S5200N
-		A4S,            //Z81sp
-		//(Centrino)
-		F3Sa,
+		A1x = 0,	/* A1340D, A1300F */
+		A2x,		/* A2500H */
+		A4G,		/* A4700G */
+		D1x,		/* D1 */
+		L2D,		/* L2000D */
+		L3C,		/* L3800C */
+		L3D,		/* L3400D */
+		L3H,		/* L3H, L2000E, L5D */
+		L4R,		/* L4500R */
+		L5x,		/* L5800C */
+		L8L,		/* L8400L */
+		M1A,		/* M1300A */
+		M2E,		/* M2400E, L4400L */
+		M6N,		/* M6800N, W3400N */
+		M6R,		/* M6700R, A3000G */
+		P30,		/* Samsung P30 */
+		S1x,		/* S1300A, but also L1400B and M2400A (L84F) */
+		S2x,		/* S200 (J1 reported), Victor MP-XP7210 */
+		W1N,		/* W1000N */
+		W5A,		/* W5A */
+		W3V,            /* W3030V */
+		xxN,		/* M2400N, M3700N, M5200N, M6800N,
+							 S1300N, S5200N*/
+		A4S,            /* Z81sp */
+		F3Sa,		/* (Centrino) */
 		END_MODEL
-	} model;		//Models currently supported
-	u16 event_count[128];	//count for each event TODO make this better
+	} model;		/* Models currently supported */
+	u16 event_count[128];	/* Count for each event TODO make this better */
 };
 
 /* Here we go */
@@ -459,18 +459,18 @@
 		},
 };
 
-/* 
+/*
  * This function evaluates an ACPI method, given an int as parameter, the
  * method is searched within the scope of the handle, can be NULL. The output
  * of the method is written is output, which can also be NULL
  *
- * returns 1 if write is successful, 0 else. 
+ * returns 1 if write is successful, 0 else.
  */
 static int write_acpi_int(acpi_handle handle, const char *method, int val,
 			  struct acpi_buffer *output)
 {
-	struct acpi_object_list params;	//list of input parameters (an int here)
-	union acpi_object in_obj;	//the only param we use
+	struct acpi_object_list params;	/* list of input parameters (int) */
+	union acpi_object in_obj;	/* the only param we use */
 	acpi_status status;
 
 	params.count = 1;
@@ -507,18 +507,18 @@
 {
 	int len = 0;
 	int temp;
-	char buf[16];		//enough for all info
+	char buf[16];		/* enough for all info */
 	/*
-	 * We use the easy way, we don't care of off and count, so we don't set eof
-	 * to 1
+	 * We use the easy way, we don't care of off and count,
+	 * so we don't set eof to 1
 	 */
 
 	len += sprintf(page, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n");
 	len += sprintf(page + len, "Model reference    : %s\n",
 		       hotk->methods->name);
-	/* 
-	 * The SFUN method probably allows the original driver to get the list 
-	 * of features supported by a given model. For now, 0x0100 or 0x0800 
+	/*
+	 * The SFUN method probably allows the original driver to get the list
+	 * of features supported by a given model. For now, 0x0100 or 0x0800
 	 * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card.
 	 * The significance of others is yet to be found.
 	 */
@@ -528,7 +528,7 @@
 	/*
 	 * Another value for userspace: the ASYM method returns 0x02 for
 	 * battery low and 0x04 for battery critical, its readings tend to be
-	 * more accurate than those provided by _BST. 
+	 * more accurate than those provided by _BST.
 	 * Note: since not all the laptops provide this method, errors are
 	 * silently ignored.
 	 */
@@ -579,7 +579,7 @@
 	return (hotk->status & ledmask) ? 1 : 0;
 }
 
-static int parse_arg(const char __user * buf, unsigned long count, int *val)
+static int parse_arg(const char __user *buf, unsigned long count, int *val)
 {
 	char s[32];
 	if (!count)
@@ -596,7 +596,7 @@
 
 /* FIXME: kill extraneous args so it can be called independently */
 static int
-write_led(const char __user * buffer, unsigned long count,
+write_led(const char __user *buffer, unsigned long count,
 	  char *ledname, int ledmask, int invert)
 {
 	int rv, value;
@@ -631,7 +631,7 @@
 }
 
 static int
-proc_write_mled(struct file *file, const char __user * buffer,
+proc_write_mled(struct file *file, const char __user *buffer,
 		unsigned long count, void *data)
 {
 	return write_led(buffer, count, hotk->methods->mt_mled, MLED_ON, 1);
@@ -648,7 +648,7 @@
 }
 
 static int
-proc_write_ledd(struct file *file, const char __user * buffer,
+proc_write_ledd(struct file *file, const char __user *buffer,
 		unsigned long count, void *data)
 {
 	int rv, value;
@@ -677,7 +677,7 @@
 }
 
 static int
-proc_write_wled(struct file *file, const char __user * buffer,
+proc_write_wled(struct file *file, const char __user *buffer,
 		unsigned long count, void *data)
 {
 	return write_led(buffer, count, hotk->methods->mt_wled, WLED_ON, 0);
@@ -694,10 +694,10 @@
 }
 
 static int
-proc_write_bluetooth(struct file *file, const char __user * buffer,
+proc_write_bluetooth(struct file *file, const char __user *buffer,
 		     unsigned long count, void *data)
 {
-	/* Note: mt_bt_switch controls both internal Bluetooth adapter's 
+	/* Note: mt_bt_switch controls both internal Bluetooth adapter's
 	   presence and its LED */
 	return write_led(buffer, count, hotk->methods->mt_bt_switch, BT_ON, 0);
 }
@@ -714,7 +714,7 @@
 }
 
 static int
-proc_write_tled(struct file *file, const char __user * buffer,
+proc_write_tled(struct file *file, const char __user *buffer,
 		unsigned long count, void *data)
 {
 	return write_led(buffer, count, hotk->methods->mt_tled, TLED_ON, 0);
@@ -734,7 +734,7 @@
 
 		input.count = 2;
 		input.pointer = mt_params;
-		/* Note: the following values are partly guessed up, but 
+		/* Note: the following values are partly guessed up, but
 		   otherwise they seem to work */
 		mt_params[0].type = ACPI_TYPE_INTEGER;
 		mt_params[0].integer.value = 0x02;
@@ -753,7 +753,7 @@
 			/* That's what the AML code does */
 			lcd = out_obj.integer.value >> 8;
 	} else if (hotk->model == F3Sa) {
-		unsigned long tmp;
+		unsigned long long tmp;
 		union acpi_object param;
 		struct acpi_object_list input;
 		acpi_status status;
@@ -796,12 +796,13 @@
 			    acpi_evaluate_object(NULL,
 						 hotk->methods->mt_lcd_switch,
 						 NULL, NULL);
-		} else {	/* L3H and the like have to be handled differently */
+		} else {
+			/* L3H and the like must be handled differently */
 			if (!write_acpi_int
 			    (hotk->handle, hotk->methods->mt_lcd_switch, 0x07,
 			     NULL))
 				status = AE_ERROR;
-			/* L3H's AML executes EHK (0x07) upon Fn+F7 keypress, 
+			/* L3H's AML executes EHK (0x07) upon Fn+F7 keypress,
 			   the exact behaviour is simulated here */
 		}
 		if (ACPI_FAILURE(status))
@@ -819,7 +820,7 @@
 }
 
 static int
-proc_write_lcd(struct file *file, const char __user * buffer,
+proc_write_lcd(struct file *file, const char __user *buffer,
 	       unsigned long count, void *data)
 {
 	int rv, value;
@@ -897,7 +898,7 @@
 }
 
 static int
-proc_write_brn(struct file *file, const char __user * buffer,
+proc_write_brn(struct file *file, const char __user *buffer,
 	       unsigned long count, void *data)
 {
 	int rv, value;
@@ -921,7 +922,7 @@
 }
 
 /*
- * Now, *this* one could be more user-friendly, but so far, no-one has 
+ * Now, *this* one could be more user-friendly, but so far, no-one has
  * complained. The significance of bits is the same as in proc_write_disp()
  */
 static int
@@ -933,18 +934,18 @@
 	if (!read_acpi_int(hotk->handle, hotk->methods->display_get, &value))
 		printk(KERN_WARNING
 		       "Asus ACPI: Error reading display status\n");
-	value &= 0x07;		/* needed for some models, shouldn't hurt others */
+	value &= 0x07;	/* needed for some models, shouldn't hurt others */
 	return sprintf(page, "%d\n", value);
 }
 
 /*
- * Experimental support for display switching. As of now: 1 should activate 
- * the LCD output, 2 should do for CRT, and 4 for TV-Out. Any combination 
- * (bitwise) of these will suffice. I never actually tested 3 displays hooked up 
- * simultaneously, so be warned. See the acpi4asus README for more info.
+ * Experimental support for display switching. As of now: 1 should activate
+ * the LCD output, 2 should do for CRT, and 4 for TV-Out. Any combination
+ * (bitwise) of these will suffice. I never actually tested 3 displays hooked
+ * up simultaneously, so be warned. See the acpi4asus README for more info.
  */
 static int
-proc_write_disp(struct file *file, const char __user * buffer,
+proc_write_disp(struct file *file, const char __user *buffer,
 		unsigned long count, void *data)
 {
 	int rv, value;
@@ -957,12 +958,12 @@
 
 typedef int (proc_readfunc) (char *page, char **start, off_t off, int count,
 			     int *eof, void *data);
-typedef int (proc_writefunc) (struct file * file, const char __user * buffer,
+typedef int (proc_writefunc) (struct file *file, const char __user *buffer,
 			      unsigned long count, void *data);
 
 static int
-asus_proc_add(char *name, proc_writefunc * writefunc,
-		     proc_readfunc * readfunc, mode_t mode,
+asus_proc_add(char *name, proc_writefunc *writefunc,
+		     proc_readfunc *readfunc, mode_t mode,
 		     struct acpi_device *device)
 {
 	struct proc_dir_entry *proc =
@@ -1040,9 +1041,9 @@
 			      &proc_read_bluetooth, mode, device);
 	}
 
-	/* 
-	 * We need both read node and write method as LCD switch is also accessible
-	 * from keyboard 
+	/*
+	 * We need both read node and write method as LCD switch is also
+	 * accessible from the keyboard
 	 */
 	if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) {
 		asus_proc_add(PROC_LCD, &proc_write_lcd, &proc_read_lcd, mode,
@@ -1096,11 +1097,10 @@
 	if (!hotk)
 		return;
 
-	if ((event & ~((u32) BR_UP)) < 16) {
+	if ((event & ~((u32) BR_UP)) < 16)
 		hotk->brightness = (event & ~((u32) BR_UP));
-	} else if ((event & ~((u32) BR_DOWN)) < 16) {
+	else if ((event & ~((u32) BR_DOWN)) < 16)
 		hotk->brightness = (event & ~((u32) BR_DOWN));
-	}
 
 	acpi_bus_generate_proc_event(hotk->device, event,
 				hotk->event_count[event % 128]++);
@@ -1186,8 +1186,8 @@
 	acpi_status status;
 
 	/*
-	 * Get DSDT headers early enough to allow for differentiating between 
-	 * models, but late enough to allow acpi_bus_register_driver() to fail 
+	 * Get DSDT headers early enough to allow for differentiating between
+	 * models, but late enough to allow acpi_bus_register_driver() to fail
 	 * before doing anything ACPI-specific. Should we encounter a machine,
 	 * which needs special handling (i.e. its hotkey device has a different
 	 * HID), this bit will be moved. A global variable asus_info contains
@@ -1212,8 +1212,8 @@
 
 	/*
 	 * Try to match the object returned by INIT to the specific model.
-	 * Handle every possible object (or the lack of thereof) the DSDT 
-	 * writers might throw at us. When in trouble, we pass NULL to 
+	 * Handle every possible object (or the lack of thereof) the DSDT
+	 * writers might throw at us. When in trouble, we pass NULL to
 	 * asus_model_match() and try something completely different.
 	 */
 	if (buffer.pointer) {
@@ -1244,6 +1244,8 @@
 			       "default values\n", string);
 			printk(KERN_NOTICE
 			       "  send /proc/acpi/dsdt to the developers\n");
+			kfree(model);
+			return -ENODEV;
 		}
 		hotk->methods = &model_conf[hotk->model];
 		return AE_OK;
@@ -1254,7 +1256,7 @@
 	/* Sort of per-model blacklist */
 	if (strncmp(string, "L2B", 3) == 0)
 		hotk->methods->lcd_status = NULL;
-	/* L2B is similar enough to L3C to use its settings, with this only 
+	/* L2B is similar enough to L3C to use its settings, with this only
 	   exception */
 	else if (strncmp(string, "A3G", 3) == 0)
 		hotk->methods->lcd_status = "\\BLFG";
@@ -1321,7 +1323,7 @@
 	hotk->handle = device->handle;
 	strcpy(acpi_device_name(device), ACPI_HOTK_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_HOTK_CLASS);
-	acpi_driver_data(device) = hotk;
+	device->driver_data = hotk;
 	hotk->device = device;
 
 	result = asus_hotk_check();
@@ -1366,10 +1368,9 @@
 	/* LED display is off by default */
 	hotk->ledd_status = 0xFFF;
 
-      end:
-	if (result) {
+end:
+	if (result)
 		kfree(hotk);
-	}
 
 	return result;
 }
@@ -1394,8 +1395,8 @@
 }
 
 static struct backlight_ops asus_backlight_data = {
-        .get_brightness = read_brightness,
-        .update_status  = set_brightness_status,
+	.get_brightness = read_brightness,
+	.update_status  = set_brightness_status,
 };
 
 static void asus_acpi_exit(void)
@@ -1442,15 +1443,15 @@
 		return -ENODEV;
 	}
 
-	asus_backlight_device = backlight_device_register("asus",NULL,NULL,
+	asus_backlight_device = backlight_device_register("asus", NULL, NULL,
 							  &asus_backlight_data);
-        if (IS_ERR(asus_backlight_device)) {
+	if (IS_ERR(asus_backlight_device)) {
 		printk(KERN_ERR "Could not register asus backlight device\n");
 		asus_backlight_device = NULL;
 		asus_acpi_exit();
 		return -ENODEV;
 	}
-        asus_backlight_device->props.max_brightness = 15;
+	asus_backlight_device->props.max_brightness = 15;
 
 	return 0;
 }
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 70f7f60..b2133e8 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -804,7 +804,7 @@
 	battery->device = device;
 	strcpy(acpi_device_name(device), ACPI_BATTERY_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_BATTERY_CLASS);
-	acpi_driver_data(device) = battery;
+	device->driver_data = battery;
 	mutex_init(&battery->lock);
 	acpi_battery_update(battery);
 #ifdef CONFIG_ACPI_PROCFS_POWER
diff --git a/drivers/acpi/bay.c b/drivers/acpi/bay.c
deleted file mode 100644
index 61b6c5b..0000000
--- a/drivers/acpi/bay.c
+++ /dev/null
@@ -1,411 +0,0 @@
-/*
- *  bay.c - ACPI removable drive bay driver
- *
- *  Copyright (C) 2006 Kristen Carlson Accardi <kristen.c.accardi@intel.com>
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or (at
- *  your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/notifier.h>
-#include <acpi/acpi_bus.h>
-#include <acpi/acpi_drivers.h>
-#include <linux/seq_file.h>
-#include <asm/uaccess.h>
-#include <linux/platform_device.h>
-
-ACPI_MODULE_NAME("bay");
-MODULE_AUTHOR("Kristen Carlson Accardi");
-MODULE_DESCRIPTION("ACPI Removable Drive Bay Driver");
-MODULE_LICENSE("GPL");
-#define ACPI_BAY_CLASS "bay"
-#define ACPI_BAY_COMPONENT	0x10000000
-#define _COMPONENT ACPI_BAY_COMPONENT
-#define bay_dprintk(h,s) {\
-	char prefix[80] = {'\0'};\
-	struct acpi_buffer buffer = {sizeof(prefix), prefix};\
-	acpi_get_name(h, ACPI_FULL_PATHNAME, &buffer);\
-	printk(KERN_DEBUG PREFIX "%s: %s\n", prefix, s); }
-static void bay_notify(acpi_handle handle, u32 event, void *data);
-
-static const struct acpi_device_id bay_device_ids[] = {
-	{"LNXIOBAY", 0},
-	{"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, bay_device_ids);
-
-struct bay {
-	acpi_handle handle;
-	char *name;
-	struct list_head list;
-	struct platform_device *pdev;
-};
-
-static LIST_HEAD(drive_bays);
-
-
-/*****************************************************************************
- *                         Drive Bay functions                               *
- *****************************************************************************/
-/**
- * is_ejectable - see if a device is ejectable
- * @handle: acpi handle of the device
- *
- * If an acpi object has a _EJ0 method, then it is ejectable
- */
-static int is_ejectable(acpi_handle handle)
-{
-	acpi_status status;
-	acpi_handle tmp;
-
-	status = acpi_get_handle(handle, "_EJ0", &tmp);
-	if (ACPI_FAILURE(status))
-		return 0;
-	return 1;
-}
-
-/**
- * bay_present - see if the bay device is present
- * @bay: the drive bay
- *
- * execute the _STA method.
- */
-static int bay_present(struct bay *bay)
-{
-	unsigned long sta;
-	acpi_status status;
-
-	if (bay) {
-		status = acpi_evaluate_integer(bay->handle, "_STA", NULL, &sta);
-		if (ACPI_SUCCESS(status) && sta)
-			return 1;
-	}
-	return 0;
-}
-
-/**
- * eject_device - respond to an eject request
- * @handle - the device to eject
- *
- * Call this devices _EJ0 method.
- */
-static void eject_device(acpi_handle handle)
-{
-	struct acpi_object_list arg_list;
-	union acpi_object arg;
-
-	bay_dprintk(handle, "Ejecting device");
-
-	arg_list.count = 1;
-	arg_list.pointer = &arg;
-	arg.type = ACPI_TYPE_INTEGER;
-	arg.integer.value = 1;
-
-	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_EJ0",
-					      &arg_list, NULL)))
-		pr_debug("Failed to evaluate _EJ0!\n");
-}
-
-/*
- * show_present - read method for "present" file in sysfs
- */
-static ssize_t show_present(struct device *dev,
-			   struct device_attribute *attr, char *buf)
-{
-	struct bay *bay = dev_get_drvdata(dev);
-	return snprintf(buf, PAGE_SIZE, "%d\n", bay_present(bay));
-
-}
-static DEVICE_ATTR(present, S_IRUGO, show_present, NULL);
-
-/*
- * write_eject - write method for "eject" file in sysfs
- */
-static ssize_t write_eject(struct device *dev, struct device_attribute *attr,
-			   const char *buf, size_t count)
-{
-	struct bay *bay = dev_get_drvdata(dev);
-
-	if (!count)
-		return -EINVAL;
-
-	eject_device(bay->handle);
-	return count;
-}
-static DEVICE_ATTR(eject, S_IWUSR, NULL, write_eject);
-
-/**
- * is_ata - see if a device is an ata device
- * @handle: acpi handle of the device
- *
- * If an acpi object has one of 4 ATA ACPI methods defined,
- * then it is an ATA device
- */
-static int is_ata(acpi_handle handle)
-{
-	acpi_handle tmp;
-
-	if ((ACPI_SUCCESS(acpi_get_handle(handle, "_GTF", &tmp))) ||
-	   (ACPI_SUCCESS(acpi_get_handle(handle, "_GTM", &tmp))) ||
-	   (ACPI_SUCCESS(acpi_get_handle(handle, "_STM", &tmp))) ||
-	   (ACPI_SUCCESS(acpi_get_handle(handle, "_SDD", &tmp))))
-		return 1;
-
-	return 0;
-}
-
-/**
- * parent_is_ata(acpi_handle handle)
- *
- */
-static int parent_is_ata(acpi_handle handle)
-{
-	acpi_handle phandle;
-
-	if (acpi_get_parent(handle, &phandle))
-		return 0;
-
-	return is_ata(phandle);
-}
-
-/**
- * is_ejectable_bay - see if a device is an ejectable drive bay
- * @handle: acpi handle of the device
- *
- * If an acpi object is ejectable and has one of the ACPI ATA
- * methods defined, then we can safely call it an ejectable
- * drive bay
- */
-static int is_ejectable_bay(acpi_handle handle)
-{
-	if ((is_ata(handle) || parent_is_ata(handle)) && is_ejectable(handle))
-		return 1;
-	return 0;
-}
-
-#if 0
-/**
- * eject_removable_drive - try to eject this drive
- * @dev : the device structure of the drive
- *
- * If a device is a removable drive that requires an _EJ0 method
- * to be executed in order to safely remove from the system, do
- * it.  ATM - always returns success
- */
-int eject_removable_drive(struct device *dev)
-{
-	acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
-
-	if (handle) {
-		bay_dprintk(handle, "Got device handle");
-		if (is_ejectable_bay(handle))
-			eject_device(handle);
-	} else {
-		printk("No acpi handle for device\n");
-	}
-
-	/* should I return an error code? */
-	return 0;
-}
-EXPORT_SYMBOL_GPL(eject_removable_drive);
-#endif  /*  0  */
-
-static int acpi_bay_add_fs(struct bay *bay)
-{
-	int ret;
-	struct device *dev = &bay->pdev->dev;
-
-	ret = device_create_file(dev, &dev_attr_present);
-	if (ret)
-		goto add_fs_err;
-	ret = device_create_file(dev, &dev_attr_eject);
-	if (ret) {
-		device_remove_file(dev, &dev_attr_present);
-		goto add_fs_err;
-	}
-	return 0;
-
- add_fs_err:
-	bay_dprintk(bay->handle, "Error adding sysfs files\n");
-	return ret;
-}
-
-static void acpi_bay_remove_fs(struct bay *bay)
-{
-	struct device *dev = &bay->pdev->dev;
-
-	/* cleanup sysfs */
-	device_remove_file(dev, &dev_attr_present);
-	device_remove_file(dev, &dev_attr_eject);
-}
-
-static int bay_is_dock_device(acpi_handle handle)
-{
-	acpi_handle parent;
-
-	acpi_get_parent(handle, &parent);
-
-	/* if the device or it's parent is dependent on the
-	 * dock, then we are a dock device
-	 */
-	return (is_dock_device(handle) || is_dock_device(parent));
-}
-
-static int bay_add(acpi_handle handle, int id)
-{
-	acpi_status status;
-	struct bay *new_bay;
-	struct platform_device *pdev;
-	struct acpi_buffer nbuffer = {ACPI_ALLOCATE_BUFFER, NULL};
-	acpi_get_name(handle, ACPI_FULL_PATHNAME, &nbuffer);
-
-	bay_dprintk(handle, "Adding notify handler");
-
-	/*
-	 * Initialize bay device structure
-	 */
-	new_bay = kzalloc(sizeof(*new_bay), GFP_ATOMIC);
-	INIT_LIST_HEAD(&new_bay->list);
-	new_bay->handle = handle;
-	new_bay->name = (char *)nbuffer.pointer;
-
-	/* initialize platform device stuff */
-	pdev = platform_device_register_simple(ACPI_BAY_CLASS, id, NULL, 0);
-	if (IS_ERR(pdev)) {
-		printk(KERN_ERR PREFIX "Error registering bay device\n");
-		goto bay_add_err;
-	}
-	new_bay->pdev = pdev;
-	platform_set_drvdata(pdev, new_bay);
-
-	/*
-	 * we want the bay driver to be able to send uevents
-	 */
-	pdev->dev.uevent_suppress = 0;
-
-	/* register for events on this device */
-	status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
-			bay_notify, new_bay);
-	if (ACPI_FAILURE(status)) {
-		printk(KERN_INFO PREFIX "Error installing bay notify handler\n");
-		platform_device_unregister(new_bay->pdev);
-		goto bay_add_err;
-	}
-
-	if (acpi_bay_add_fs(new_bay)) {
-		acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
-					   bay_notify);
-		platform_device_unregister(new_bay->pdev);
-		goto bay_add_err;
-	}
-
-	/* if we are on a dock station, we should register for dock
-	 * notifications.
-	 */
-	if (bay_is_dock_device(handle)) {
-		bay_dprintk(handle, "Is dependent on dock\n");
-		register_hotplug_dock_device(handle, bay_notify, new_bay);
-	}
-	list_add(&new_bay->list, &drive_bays);
-	printk(KERN_INFO PREFIX "Bay [%s] Added\n", new_bay->name);
-	return 0;
-
-bay_add_err:
-	kfree(new_bay->name);
-	kfree(new_bay);
-	return -ENODEV;
-}
-
-/**
- * bay_notify - act upon an acpi bay notification
- * @handle: the bay handle
- * @event: the acpi event
- * @data: our driver data struct
- *
- */
-static void bay_notify(acpi_handle handle, u32 event, void *data)
-{
-	struct bay *bay_dev = (struct bay *)data;
-	struct device *dev = &bay_dev->pdev->dev;
-	char event_string[12];
-	char *envp[] = { event_string, NULL };
-
-	bay_dprintk(handle, "Bay event");
-	sprintf(event_string, "BAY_EVENT=%d", event);
-	kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, envp);
-}
-
-static acpi_status
-find_bay(acpi_handle handle, u32 lvl, void *context, void **rv)
-{
-	int *count = (int *)context;
-
-	/*
-	 * there could be more than one ejectable bay.
-	 * so, just return AE_OK always so that every object
-	 * will be checked.
-	 */
-	if (is_ejectable_bay(handle)) {
-		bay_dprintk(handle, "found ejectable bay");
-		if (!bay_add(handle, *count))
-			(*count)++;
-	}
-	return AE_OK;
-}
-
-static int __init bay_init(void)
-{
-	int bays = 0;
-
-	INIT_LIST_HEAD(&drive_bays);
-
-	if (acpi_disabled)
-		return -ENODEV;
-
-	/* look for dockable drive bays */
-	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
-		ACPI_UINT32_MAX, find_bay, &bays, NULL);
-
-	if (!bays)
-		return -ENODEV;
-
-	return 0;
-}
-
-static void __exit bay_exit(void)
-{
-	struct bay *bay, *tmp;
-
-	list_for_each_entry_safe(bay, tmp, &drive_bays, list) {
-		if (is_dock_device(bay->handle))
-			unregister_hotplug_dock_device(bay->handle);
-		acpi_bay_remove_fs(bay);
-		acpi_remove_notify_handler(bay->handle, ACPI_SYSTEM_NOTIFY,
-			bay_notify);
-		platform_device_unregister(bay->pdev);
-		kfree(bay->name);
-		kfree(bay);
-	}
-}
-
-postcore_initcall(bay_init);
-module_exit(bay_exit);
-
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index ccae305..c797c64 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -48,6 +48,23 @@
 
 #define STRUCT_TO_INT(s)	(*((int*)&s))
 
+static int set_power_nocheck(const struct dmi_system_id *id)
+{
+	printk(KERN_NOTICE PREFIX "%s detected - "
+		"disable power check in power transistion\n", id->ident);
+	acpi_power_nocheck = 1;
+	return 0;
+}
+static struct dmi_system_id __cpuinitdata power_nocheck_dmi_table[] = {
+	{
+	set_power_nocheck, "HP Pavilion 05", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+	DMI_MATCH(DMI_SYS_VENDOR, "HP Pavilion 05"),
+	DMI_MATCH(DMI_PRODUCT_VERSION, "2001211RE101GLEND") }, NULL},
+	{},
+};
+
+
 /* --------------------------------------------------------------------------
                                 Device Management
    -------------------------------------------------------------------------- */
@@ -77,7 +94,7 @@
 int acpi_bus_get_status(struct acpi_device *device)
 {
 	acpi_status status = AE_OK;
-	unsigned long sta = 0;
+	unsigned long long sta = 0;
 
 
 	if (!device)
@@ -95,21 +112,21 @@
 	}
 
 	/*
-	 * Otherwise we assume the status of our parent (unless we don't
-	 * have one, in which case status is implied).
+	 * According to ACPI spec some device can be present and functional
+	 * even if the parent is not present but functional.
+	 * In such conditions the child device should not inherit the status
+	 * from the parent.
 	 */
-	else if (device->parent)
-		device->status = device->parent->status;
 	else
 		STRUCT_TO_INT(device->status) =
 		    ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
 		    ACPI_STA_DEVICE_UI      | ACPI_STA_DEVICE_FUNCTIONING;
 
 	if (device->status.functional && !device->status.present) {
-		printk(KERN_WARNING PREFIX "Device [%s] status [%08x]: "
-		       "functional but not present; setting present\n",
-		       device->pnp.bus_id, (u32) STRUCT_TO_INT(device->status));
-		device->status.present = 1;
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]: "
+		       "functional but not present;\n",
+			device->pnp.bus_id,
+			(u32) STRUCT_TO_INT(device->status)));
 	}
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]\n",
@@ -155,7 +172,7 @@
 	int result = 0;
 	acpi_status status = 0;
 	struct acpi_device *device = NULL;
-	unsigned long psc = 0;
+	unsigned long long psc = 0;
 
 
 	result = acpi_bus_get_device(handle, &device);
@@ -223,7 +240,19 @@
 	/*
 	 * Get device's current power state
 	 */
-	acpi_bus_get_power(device->handle, &device->power.state);
+	if (!acpi_power_nocheck) {
+		/*
+		 * Maybe the incorrect power state is returned on the bogus
+		 * bios, which is different with the real power state.
+		 * For example: the bios returns D0 state and the real power
+		 * state is D3. OS expects to set the device to D0 state. In
+		 * such case if OS uses the power state returned by the BIOS,
+		 * the device can't be transisted to the correct power state.
+		 * So if the acpi_power_nocheck is set, it is unnecessary to
+		 * get the power state by calling acpi_bus_get_power.
+		 */
+		acpi_bus_get_power(device->handle, &device->power.state);
+	}
 	if ((state == device->power.state) && !device->flags.force_power_state) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n",
 				  state));
@@ -496,6 +525,19 @@
 	return 0;
 }
 
+static BLOCKING_NOTIFIER_HEAD(acpi_bus_notify_list);
+int register_acpi_bus_notifier(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&acpi_bus_notify_list, nb);
+}
+EXPORT_SYMBOL_GPL(register_acpi_bus_notifier);
+
+void unregister_acpi_bus_notifier(struct notifier_block *nb)
+{
+	blocking_notifier_chain_unregister(&acpi_bus_notify_list, nb);
+}
+EXPORT_SYMBOL_GPL(unregister_acpi_bus_notifier);
+
 /**
  * acpi_bus_notify
  * ---------------
@@ -506,6 +548,8 @@
 	int result = 0;
 	struct acpi_device *device = NULL;
 
+	blocking_notifier_call_chain(&acpi_bus_notify_list,
+		type, (void *)handle);
 
 	if (acpi_bus_get_device(handle, &device))
 		return;
@@ -749,6 +793,12 @@
 		goto error1;
 	}
 
+	/*
+	 * Maybe EC region is required at bus_scan/acpi_get_devices. So it
+	 * is necessary to enable it as early as possible.
+	 */
+	acpi_boot_ec_enable();
+
 	printk(KERN_INFO PREFIX "Interpreter enabled\n");
 
 	/* Initialize sleep structures */
@@ -818,7 +868,11 @@
 		}
 	} else
 		disable_acpi();
-
+	/*
+	 * If the laptop falls into the DMI check table, the power state check
+	 * will be disabled in the course of device power transistion.
+	 */
+	dmi_check_system(power_nocheck_dmi_table);
 	return result;
 }
 
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 1dfec41..cb046c3 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -145,7 +145,7 @@
 {
 	struct acpi_button *button = seq->private;
 	acpi_status status;
-	unsigned long state;
+	unsigned long long state;
 
 	if (!button || !button->device)
 		return 0;
@@ -253,7 +253,7 @@
    -------------------------------------------------------------------------- */
 static int acpi_lid_send_state(struct acpi_button *button)
 {
-	unsigned long state;
+	unsigned long long state;
 	acpi_status status;
 
 	status = acpi_evaluate_integer(button->device->handle, "_LID", NULL,
@@ -262,6 +262,7 @@
 		return -ENODEV;
 	/* input layer checks if event is redundant */
 	input_report_switch(button->input, SW_LID, !state);
+	input_sync(button->input);
 	return 0;
 }
 
@@ -285,8 +286,8 @@
 			input_report_key(input, keycode, 1);
 			input_sync(input);
 			input_report_key(input, keycode, 0);
+			input_sync(input);
 		}
-		input_sync(input);
 
 		acpi_bus_generate_proc_event(button->device, event,
 					++button->pushed);
@@ -384,7 +385,7 @@
 		return -ENOMEM;
 
 	button->device = device;
-	acpi_driver_data(device) = button;
+	device->driver_data = button;
 
 	button->input = input = input_allocate_device();
 	if (!input) {
diff --git a/drivers/acpi/cm_sbs.c b/drivers/acpi/cm_sbs.c
index f9db4f4..4441e84 100644
--- a/drivers/acpi/cm_sbs.c
+++ b/drivers/acpi/cm_sbs.c
@@ -52,8 +52,8 @@
 	if (acpi_ac_dir) {
 		lock_ac_dir_cnt++;
 	} else {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Cannot create %s\n", ACPI_AC_CLASS));
+		printk(KERN_ERR PREFIX
+				  "Cannot create %s\n", ACPI_AC_CLASS);
 	}
 	mutex_unlock(&cm_sbs_mutex);
 	return acpi_ac_dir;
@@ -83,8 +83,8 @@
 	if (acpi_battery_dir) {
 		lock_battery_dir_cnt++;
 	} else {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Cannot create %s\n", ACPI_BATTERY_CLASS));
+		printk(KERN_ERR PREFIX
+				  "Cannot create %s\n", ACPI_BATTERY_CLASS);
 	}
 	mutex_unlock(&cm_sbs_mutex);
 	return acpi_battery_dir;
diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c
index 3c25ec7..134818b 100644
--- a/drivers/acpi/container.c
+++ b/drivers/acpi/container.c
@@ -76,7 +76,7 @@
 {
 	acpi_handle temp;
 	acpi_status status;
-	unsigned long sta;
+	unsigned long long sta;
 
 
 	status = acpi_get_handle(handle, "_STA", &temp);
@@ -108,7 +108,7 @@
 	container->handle = device->handle;
 	strcpy(acpi_device_name(device), ACPI_CONTAINER_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_CONTAINER_CLASS);
-	acpi_driver_data(device) = container;
+	device->driver_data = container;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device <%s> bid <%s>\n",
 			  acpi_device_name(device), acpi_device_bid(device)));
diff --git a/drivers/acpi/debug.c b/drivers/acpi/debug.c
index 6df564f..abf36b4 100644
--- a/drivers/acpi/debug.c
+++ b/drivers/acpi/debug.c
@@ -47,8 +47,6 @@
 };
 
 static const struct acpi_dlevel acpi_debug_levels[] = {
-	ACPI_DEBUG_INIT(ACPI_LV_ERROR),
-	ACPI_DEBUG_INIT(ACPI_LV_WARN),
 	ACPI_DEBUG_INIT(ACPI_LV_INIT),
 	ACPI_DEBUG_INIT(ACPI_LV_DEBUG_OBJECT),
 	ACPI_DEBUG_INIT(ACPI_LV_INFO),
diff --git a/drivers/acpi/dispatcher/dsmethod.c b/drivers/acpi/dispatcher/dsmethod.c
index 4613b9c..279a5a6 100644
--- a/drivers/acpi/dispatcher/dsmethod.c
+++ b/drivers/acpi/dispatcher/dsmethod.c
@@ -103,6 +103,9 @@
 						    NULL);
 		acpi_ex_enter_interpreter();
 	}
+
+	acpi_ds_clear_implicit_return(walk_state);
+
 #ifdef ACPI_DISASSEMBLER
 	if (ACPI_FAILURE(status)) {
 
diff --git a/drivers/acpi/dispatcher/dsmthdat.c b/drivers/acpi/dispatcher/dsmthdat.c
index 13c43ea..d03f81b 100644
--- a/drivers/acpi/dispatcher/dsmthdat.c
+++ b/drivers/acpi/dispatcher/dsmthdat.c
@@ -43,7 +43,6 @@
 
 #include <acpi/acpi.h>
 #include <acpi/acdispat.h>
-#include <acpi/amlcode.h>
 #include <acpi/acnamesp.h>
 #include <acpi/acinterp.h>
 
@@ -52,11 +51,11 @@
 
 /* Local prototypes */
 static void
-acpi_ds_method_data_delete_value(u16 opcode,
+acpi_ds_method_data_delete_value(u8 type,
 				 u32 index, struct acpi_walk_state *walk_state);
 
 static acpi_status
-acpi_ds_method_data_set_value(u16 opcode,
+acpi_ds_method_data_set_value(u8 type,
 			      u32 index,
 			      union acpi_operand_object *object,
 			      struct acpi_walk_state *walk_state);
@@ -216,7 +215,7 @@
 		 * Store the argument in the method/walk descriptor.
 		 * Do not copy the arg in order to implement call by reference
 		 */
-		status = acpi_ds_method_data_set_value(AML_ARG_OP, index,
+		status = acpi_ds_method_data_set_value(ACPI_REFCLASS_ARG, index,
 						       params[index],
 						       walk_state);
 		if (ACPI_FAILURE(status)) {
@@ -234,7 +233,8 @@
  *
  * FUNCTION:    acpi_ds_method_data_get_node
  *
- * PARAMETERS:  Opcode              - Either AML_LOCAL_OP or AML_ARG_OP
+ * PARAMETERS:  Type                - Either ACPI_REFCLASS_LOCAL or
+ *                                    ACPI_REFCLASS_ARG
  *              Index               - Which Local or Arg whose type to get
  *              walk_state          - Current walk state object
  *              Node                - Where the node is returned.
@@ -246,7 +246,7 @@
  ******************************************************************************/
 
 acpi_status
-acpi_ds_method_data_get_node(u16 opcode,
+acpi_ds_method_data_get_node(u8 type,
 			     u32 index,
 			     struct acpi_walk_state *walk_state,
 			     struct acpi_namespace_node **node)
@@ -256,8 +256,8 @@
 	/*
 	 * Method Locals and Arguments are supported
 	 */
-	switch (opcode) {
-	case AML_LOCAL_OP:
+	switch (type) {
+	case ACPI_REFCLASS_LOCAL:
 
 		if (index > ACPI_METHOD_MAX_LOCAL) {
 			ACPI_ERROR((AE_INFO,
@@ -271,7 +271,7 @@
 		*node = &walk_state->local_variables[index];
 		break;
 
-	case AML_ARG_OP:
+	case ACPI_REFCLASS_ARG:
 
 		if (index > ACPI_METHOD_MAX_ARG) {
 			ACPI_ERROR((AE_INFO,
@@ -286,8 +286,8 @@
 		break;
 
 	default:
-		ACPI_ERROR((AE_INFO, "Opcode %d is invalid", opcode));
-		return_ACPI_STATUS(AE_AML_BAD_OPCODE);
+		ACPI_ERROR((AE_INFO, "Type %d is invalid", type));
+		return_ACPI_STATUS(AE_TYPE);
 	}
 
 	return_ACPI_STATUS(AE_OK);
@@ -297,7 +297,8 @@
  *
  * FUNCTION:    acpi_ds_method_data_set_value
  *
- * PARAMETERS:  Opcode              - Either AML_LOCAL_OP or AML_ARG_OP
+ * PARAMETERS:  Type                - Either ACPI_REFCLASS_LOCAL or
+ *                                    ACPI_REFCLASS_ARG
  *              Index               - Which Local or Arg to get
  *              Object              - Object to be inserted into the stack entry
  *              walk_state          - Current walk state object
@@ -310,7 +311,7 @@
  ******************************************************************************/
 
 static acpi_status
-acpi_ds_method_data_set_value(u16 opcode,
+acpi_ds_method_data_set_value(u8 type,
 			      u32 index,
 			      union acpi_operand_object *object,
 			      struct acpi_walk_state *walk_state)
@@ -321,13 +322,13 @@
 	ACPI_FUNCTION_TRACE(ds_method_data_set_value);
 
 	ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-			  "NewObj %p Opcode %X, Refs=%d [%s]\n", object,
-			  opcode, object->common.reference_count,
+			  "NewObj %p Type %2.2X, Refs=%d [%s]\n", object,
+			  type, object->common.reference_count,
 			  acpi_ut_get_type_name(object->common.type)));
 
 	/* Get the namespace node for the arg/local */
 
-	status = acpi_ds_method_data_get_node(opcode, index, walk_state, &node);
+	status = acpi_ds_method_data_get_node(type, index, walk_state, &node);
 	if (ACPI_FAILURE(status)) {
 		return_ACPI_STATUS(status);
 	}
@@ -350,7 +351,8 @@
  *
  * FUNCTION:    acpi_ds_method_data_get_value
  *
- * PARAMETERS:  Opcode              - Either AML_LOCAL_OP or AML_ARG_OP
+ * PARAMETERS:  Type                - Either ACPI_REFCLASS_LOCAL or
+ *                                    ACPI_REFCLASS_ARG
  *              Index               - Which local_var or argument to get
  *              walk_state          - Current walk state object
  *              dest_desc           - Where Arg or Local value is returned
@@ -363,7 +365,7 @@
  ******************************************************************************/
 
 acpi_status
-acpi_ds_method_data_get_value(u16 opcode,
+acpi_ds_method_data_get_value(u8 type,
 			      u32 index,
 			      struct acpi_walk_state *walk_state,
 			      union acpi_operand_object **dest_desc)
@@ -383,7 +385,7 @@
 
 	/* Get the namespace node for the arg/local */
 
-	status = acpi_ds_method_data_get_node(opcode, index, walk_state, &node);
+	status = acpi_ds_method_data_get_node(type, index, walk_state, &node);
 	if (ACPI_FAILURE(status)) {
 		return_ACPI_STATUS(status);
 	}
@@ -419,8 +421,8 @@
 		/* Otherwise, return the error */
 
 		else
-			switch (opcode) {
-			case AML_ARG_OP:
+			switch (type) {
+			case ACPI_REFCLASS_ARG:
 
 				ACPI_ERROR((AE_INFO,
 					    "Uninitialized Arg[%d] at node %p",
@@ -428,7 +430,7 @@
 
 				return_ACPI_STATUS(AE_AML_UNINITIALIZED_ARG);
 
-			case AML_LOCAL_OP:
+			case ACPI_REFCLASS_LOCAL:
 
 				ACPI_ERROR((AE_INFO,
 					    "Uninitialized Local[%d] at node %p",
@@ -437,9 +439,10 @@
 				return_ACPI_STATUS(AE_AML_UNINITIALIZED_LOCAL);
 
 			default:
+
 				ACPI_ERROR((AE_INFO,
 					    "Not a Arg/Local opcode: %X",
-					    opcode));
+					    type));
 				return_ACPI_STATUS(AE_AML_INTERNAL);
 			}
 	}
@@ -458,7 +461,8 @@
  *
  * FUNCTION:    acpi_ds_method_data_delete_value
  *
- * PARAMETERS:  Opcode              - Either AML_LOCAL_OP or AML_ARG_OP
+ * PARAMETERS:  Type                - Either ACPI_REFCLASS_LOCAL or
+ *                                    ACPI_REFCLASS_ARG
  *              Index               - Which local_var or argument to delete
  *              walk_state          - Current walk state object
  *
@@ -470,7 +474,7 @@
  ******************************************************************************/
 
 static void
-acpi_ds_method_data_delete_value(u16 opcode,
+acpi_ds_method_data_delete_value(u8 type,
 				 u32 index, struct acpi_walk_state *walk_state)
 {
 	acpi_status status;
@@ -481,7 +485,7 @@
 
 	/* Get the namespace node for the arg/local */
 
-	status = acpi_ds_method_data_get_node(opcode, index, walk_state, &node);
+	status = acpi_ds_method_data_get_node(type, index, walk_state, &node);
 	if (ACPI_FAILURE(status)) {
 		return_VOID;
 	}
@@ -514,7 +518,8 @@
  *
  * FUNCTION:    acpi_ds_store_object_to_local
  *
- * PARAMETERS:  Opcode              - Either AML_LOCAL_OP or AML_ARG_OP
+ * PARAMETERS:  Type                - Either ACPI_REFCLASS_LOCAL or
+ *                                    ACPI_REFCLASS_ARG
  *              Index               - Which Local or Arg to set
  *              obj_desc            - Value to be stored
  *              walk_state          - Current walk state
@@ -528,7 +533,7 @@
  ******************************************************************************/
 
 acpi_status
-acpi_ds_store_object_to_local(u16 opcode,
+acpi_ds_store_object_to_local(u8 type,
 			      u32 index,
 			      union acpi_operand_object *obj_desc,
 			      struct acpi_walk_state *walk_state)
@@ -539,8 +544,8 @@
 	union acpi_operand_object *new_obj_desc;
 
 	ACPI_FUNCTION_TRACE(ds_store_object_to_local);
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Opcode=%X Index=%d Obj=%p\n",
-			  opcode, index, obj_desc));
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Type=%2.2X Index=%d Obj=%p\n",
+			  type, index, obj_desc));
 
 	/* Parameter validation */
 
@@ -550,7 +555,7 @@
 
 	/* Get the namespace node for the arg/local */
 
-	status = acpi_ds_method_data_get_node(opcode, index, walk_state, &node);
+	status = acpi_ds_method_data_get_node(type, index, walk_state, &node);
 	if (ACPI_FAILURE(status)) {
 		return_ACPI_STATUS(status);
 	}
@@ -602,7 +607,7 @@
 		 *
 		 * Weird, but true.
 		 */
-		if (opcode == AML_ARG_OP) {
+		if (type == ACPI_REFCLASS_ARG) {
 			/*
 			 * If we have a valid reference object that came from ref_of(),
 			 * do the indirect store
@@ -611,8 +616,8 @@
 			     ACPI_DESC_TYPE_OPERAND)
 			    && (current_obj_desc->common.type ==
 				ACPI_TYPE_LOCAL_REFERENCE)
-			    && (current_obj_desc->reference.opcode ==
-				AML_REF_OF_OP)) {
+			    && (current_obj_desc->reference.class ==
+				ACPI_REFCLASS_REFOF)) {
 				ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 						  "Arg (%p) is an ObjRef(Node), storing in node %p\n",
 						  new_obj_desc,
@@ -640,11 +645,9 @@
 			}
 		}
 
-		/*
-		 * Delete the existing object
-		 * before storing the new one
-		 */
-		acpi_ds_method_data_delete_value(opcode, index, walk_state);
+		/* Delete the existing object before storing the new one */
+
+		acpi_ds_method_data_delete_value(type, index, walk_state);
 	}
 
 	/*
@@ -653,7 +656,7 @@
 	 * (increments the object reference count by one)
 	 */
 	status =
-	    acpi_ds_method_data_set_value(opcode, index, new_obj_desc,
+	    acpi_ds_method_data_set_value(type, index, new_obj_desc,
 					  walk_state);
 
 	/* Remove local reference if we copied the object above */
diff --git a/drivers/acpi/dispatcher/dsobject.c b/drivers/acpi/dispatcher/dsobject.c
index 0f28058..4f08e59 100644
--- a/drivers/acpi/dispatcher/dsobject.c
+++ b/drivers/acpi/dispatcher/dsobject.c
@@ -731,54 +731,70 @@
 		switch (op_info->type) {
 		case AML_TYPE_LOCAL_VARIABLE:
 
-			/* Split the opcode into a base opcode + offset */
+			/* Local ID (0-7) is (AML opcode - base AML_LOCAL_OP) */
 
-			obj_desc->reference.opcode = AML_LOCAL_OP;
-			obj_desc->reference.offset = opcode - AML_LOCAL_OP;
+			obj_desc->reference.value = opcode - AML_LOCAL_OP;
+			obj_desc->reference.class = ACPI_REFCLASS_LOCAL;
 
 #ifndef ACPI_NO_METHOD_EXECUTION
-			status = acpi_ds_method_data_get_node(AML_LOCAL_OP,
-							      obj_desc->
-							      reference.offset,
-							      walk_state,
-							      (struct
-							       acpi_namespace_node
-							       **)&obj_desc->
-							      reference.object);
+			status =
+			    acpi_ds_method_data_get_node(ACPI_REFCLASS_LOCAL,
+							 obj_desc->reference.
+							 value, walk_state,
+							 ACPI_CAST_INDIRECT_PTR
+							 (struct
+							  acpi_namespace_node,
+							  &obj_desc->reference.
+							  object));
 #endif
 			break;
 
 		case AML_TYPE_METHOD_ARGUMENT:
 
-			/* Split the opcode into a base opcode + offset */
+			/* Arg ID (0-6) is (AML opcode - base AML_ARG_OP) */
 
-			obj_desc->reference.opcode = AML_ARG_OP;
-			obj_desc->reference.offset = opcode - AML_ARG_OP;
+			obj_desc->reference.value = opcode - AML_ARG_OP;
+			obj_desc->reference.class = ACPI_REFCLASS_ARG;
 
 #ifndef ACPI_NO_METHOD_EXECUTION
-			status = acpi_ds_method_data_get_node(AML_ARG_OP,
+			status = acpi_ds_method_data_get_node(ACPI_REFCLASS_ARG,
 							      obj_desc->
-							      reference.offset,
+							      reference.value,
 							      walk_state,
+							      ACPI_CAST_INDIRECT_PTR
 							      (struct
-							       acpi_namespace_node
-							       **)&obj_desc->
-							      reference.object);
+							       acpi_namespace_node,
+							       &obj_desc->
+							       reference.
+							       object));
 #endif
 			break;
 
-		default:	/* Other literals, etc.. */
+		default:	/* Object name or Debug object */
 
-			if (op->common.aml_opcode == AML_INT_NAMEPATH_OP) {
+			switch (op->common.aml_opcode) {
+			case AML_INT_NAMEPATH_OP:
 
 				/* Node was saved in Op */
 
 				obj_desc->reference.node = op->common.node;
 				obj_desc->reference.object =
 				    op->common.node->object;
-			}
+				obj_desc->reference.class = ACPI_REFCLASS_NAME;
+				break;
 
-			obj_desc->reference.opcode = opcode;
+			case AML_DEBUG_OP:
+
+				obj_desc->reference.class = ACPI_REFCLASS_DEBUG;
+				break;
+
+			default:
+
+				ACPI_ERROR((AE_INFO,
+					    "Unimplemented reference type for AML opcode: %4.4X",
+					    opcode));
+				return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+			}
 			break;
 		}
 		break;
diff --git a/drivers/acpi/dispatcher/dsopcode.c b/drivers/acpi/dispatcher/dsopcode.c
index 6a81c44..69fae59 100644
--- a/drivers/acpi/dispatcher/dsopcode.c
+++ b/drivers/acpi/dispatcher/dsopcode.c
@@ -1330,7 +1330,7 @@
 			     (walk_state->results->results.obj_desc[0]) ==
 			     ACPI_TYPE_LOCAL_REFERENCE)
 			    && ((walk_state->results->results.obj_desc[0])->
-				reference.opcode != AML_INDEX_OP)) {
+				reference.class != ACPI_REFCLASS_INDEX)) {
 				status =
 				    acpi_ex_resolve_to_value(&walk_state->
 							     results->results.
diff --git a/drivers/acpi/dispatcher/dswexec.c b/drivers/acpi/dispatcher/dswexec.c
index b5072fa..396fe12 100644
--- a/drivers/acpi/dispatcher/dswexec.c
+++ b/drivers/acpi/dispatcher/dswexec.c
@@ -166,6 +166,10 @@
 		status = AE_CTRL_FALSE;
 	}
 
+	/* Predicate can be used for an implicit return value */
+
+	(void)acpi_ds_do_implicit_return(local_obj_desc, walk_state, TRUE);
+
       cleanup:
 
 	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Completed a predicate eval=%X Op=%p\n",
@@ -429,10 +433,10 @@
 			     ACPI_TYPE_LOCAL_REFERENCE)
 			    && (walk_state->operands[1]->common.type ==
 				ACPI_TYPE_LOCAL_REFERENCE)
-			    && (walk_state->operands[0]->reference.opcode ==
-				walk_state->operands[1]->reference.opcode)
-			    && (walk_state->operands[0]->reference.offset ==
-				walk_state->operands[1]->reference.offset)) {
+			    && (walk_state->operands[0]->reference.class ==
+				walk_state->operands[1]->reference.class)
+			    && (walk_state->operands[0]->reference.value ==
+				walk_state->operands[1]->reference.value)) {
 				status = AE_OK;
 			} else {
 				ACPI_EXCEPTION((AE_INFO, status,
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index 7d2edf1..5b30b8d 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -48,7 +48,6 @@
 	" before undocking");
 
 static struct atomic_notifier_head dock_notifier_list;
-static struct platform_device *dock_device;
 static char dock_device_name[] = "dock";
 
 static const struct acpi_device_id dock_device_ids[] = {
@@ -65,23 +64,29 @@
 	struct mutex hp_lock;
 	struct list_head dependent_devices;
 	struct list_head hotplug_devices;
+
+	struct list_head sibiling;
+	struct platform_device *dock_device;
 };
+static LIST_HEAD(dock_stations);
+static int dock_station_count;
 
 struct dock_dependent_device {
 	struct list_head list;
 	struct list_head hotplug_list;
 	acpi_handle handle;
-	acpi_notify_handler handler;
+	struct acpi_dock_ops *ops;
 	void *context;
 };
 
 #define DOCK_DOCKING	0x00000001
 #define DOCK_UNDOCKING  0x00000002
+#define DOCK_IS_DOCK	0x00000010
+#define DOCK_IS_ATA	0x00000020
+#define DOCK_IS_BAT	0x00000040
 #define DOCK_EVENT	3
 #define UNDOCK_EVENT	2
 
-static struct dock_station *dock_station;
-
 /*****************************************************************************
  *                         Dock Dependent device functions                   *
  *****************************************************************************/
@@ -199,6 +204,60 @@
 	return 1;
 }
 
+static int is_ejectable(acpi_handle handle)
+{
+	acpi_status status;
+	acpi_handle tmp;
+
+	status = acpi_get_handle(handle, "_EJ0", &tmp);
+	if (ACPI_FAILURE(status))
+		return 0;
+	return 1;
+}
+
+static int is_ata(acpi_handle handle)
+{
+	acpi_handle tmp;
+
+	if ((ACPI_SUCCESS(acpi_get_handle(handle, "_GTF", &tmp))) ||
+	   (ACPI_SUCCESS(acpi_get_handle(handle, "_GTM", &tmp))) ||
+	   (ACPI_SUCCESS(acpi_get_handle(handle, "_STM", &tmp))) ||
+	   (ACPI_SUCCESS(acpi_get_handle(handle, "_SDD", &tmp))))
+		return 1;
+
+	return 0;
+}
+
+static int is_battery(acpi_handle handle)
+{
+	struct acpi_device_info *info;
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	int ret = 1;
+
+	if (!ACPI_SUCCESS(acpi_get_object_info(handle, &buffer)))
+		return 0;
+	info = buffer.pointer;
+	if (!(info->valid & ACPI_VALID_HID))
+		ret = 0;
+	else
+		ret = !strcmp("PNP0C0A", info->hardware_id.value);
+
+	kfree(buffer.pointer);
+	return ret;
+}
+
+static int is_ejectable_bay(acpi_handle handle)
+{
+	acpi_handle phandle;
+	if (!is_ejectable(handle))
+		return 0;
+	if (is_battery(handle) || is_ata(handle))
+		return 1;
+	if (!acpi_get_parent(handle, &phandle) && is_ata(phandle))
+		return 1;
+	return 0;
+}
+
 /**
  * is_dock_device - see if a device is on a dock station
  * @handle: acpi handle of the device
@@ -209,11 +268,17 @@
  */
 int is_dock_device(acpi_handle handle)
 {
-	if (!dock_station)
+	struct dock_station *dock_station;
+
+	if (!dock_station_count)
 		return 0;
 
-	if (is_dock(handle) || find_dock_dependent_device(dock_station, handle))
+	if (is_dock(handle))
 		return 1;
+	list_for_each_entry(dock_station, &dock_stations, sibiling) {
+		if (find_dock_dependent_device(dock_station, handle))
+			return 1;
+	}
 
 	return 0;
 }
@@ -229,7 +294,7 @@
  */
 static int dock_present(struct dock_station *ds)
 {
-	unsigned long sta;
+	unsigned long long sta;
 	acpi_status status;
 
 	if (ds) {
@@ -320,8 +385,8 @@
 	 * First call driver specific hotplug functions
 	 */
 	list_for_each_entry(dd, &ds->hotplug_devices, hotplug_list) {
-		if (dd->handler)
-			dd->handler(dd->handle, event, dd->context);
+		if (dd->ops && dd->ops->handler)
+			dd->ops->handler(dd->handle, event, dd->context);
 	}
 
 	/*
@@ -341,9 +406,10 @@
 
 static void dock_event(struct dock_station *ds, u32 event, int num)
 {
-	struct device *dev = &dock_device->dev;
+	struct device *dev = &ds->dock_device->dev;
 	char event_string[13];
 	char *envp[] = { event_string, NULL };
+	struct dock_dependent_device *dd;
 
 	if (num == UNDOCK_EVENT)
 		sprintf(event_string, "EVENT=undock");
@@ -354,7 +420,14 @@
 	 * Indicate that the status of the dock station has
 	 * changed.
 	 */
-	kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, envp);
+	if (num == DOCK_EVENT)
+		kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, envp);
+
+	list_for_each_entry(dd, &ds->hotplug_devices, hotplug_list)
+		if (dd->ops && dd->ops->uevent)
+			dd->ops->uevent(dd->handle, event, dd->context);
+	if (num != DOCK_EVENT)
+		kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, envp);
 }
 
 /**
@@ -414,9 +487,10 @@
 	arg.type = ACPI_TYPE_INTEGER;
 	arg.integer.value = dock;
 	status = acpi_evaluate_object(ds->handle, "_DCK", &arg_list, &buffer);
-	if (ACPI_FAILURE(status))
-		printk(KERN_ERR PREFIX "%s - failed to execute _DCK\n",
-			 (char *)name_buffer.pointer);
+	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND)
+		ACPI_EXCEPTION((AE_INFO, status, "%s - failed to execute"
+			" _DCK\n", (char *)name_buffer.pointer));
+
 	kfree(buffer.pointer);
 	kfree(name_buffer.pointer);
 }
@@ -452,6 +526,25 @@
 	ds->flags &= ~(DOCK_UNDOCKING);
 }
 
+static void dock_lock(struct dock_station *ds, int lock)
+{
+	struct acpi_object_list arg_list;
+	union acpi_object arg;
+	acpi_status status;
+
+	arg_list.count = 1;
+	arg_list.pointer = &arg;
+	arg.type = ACPI_TYPE_INTEGER;
+	arg.integer.value = !!lock;
+	status = acpi_evaluate_object(ds->handle, "_LCK", &arg_list, NULL);
+	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+		if (lock)
+			printk(KERN_WARNING PREFIX "Locking device failed\n");
+		else
+			printk(KERN_WARNING PREFIX "Unlocking device failed\n");
+	}
+}
+
 /**
  * dock_in_progress - see if we are in the middle of handling a dock event
  * @ds: the dock station
@@ -479,7 +572,7 @@
  */
 int register_dock_notifier(struct notifier_block *nb)
 {
-	if (!dock_station)
+	if (!dock_station_count)
 		return -ENODEV;
 
 	return atomic_notifier_chain_register(&dock_notifier_list, nb);
@@ -493,7 +586,7 @@
  */
 void unregister_dock_notifier(struct notifier_block *nb)
 {
-	if (!dock_station)
+	if (!dock_station_count)
 		return;
 
 	atomic_notifier_chain_unregister(&dock_notifier_list, nb);
@@ -504,7 +597,7 @@
 /**
  * register_hotplug_dock_device - register a hotplug function
  * @handle: the handle of the device
- * @handler: the acpi_notifier_handler to call after docking
+ * @ops: handlers to call after docking
  * @context: device specific data
  *
  * If a driver would like to perform a hotplug operation after a dock
@@ -512,27 +605,36 @@
  * the dock driver after _DCK is executed.
  */
 int
-register_hotplug_dock_device(acpi_handle handle, acpi_notify_handler handler,
+register_hotplug_dock_device(acpi_handle handle, struct acpi_dock_ops *ops,
 			     void *context)
 {
 	struct dock_dependent_device *dd;
+	struct dock_station *dock_station;
+	int ret = -EINVAL;
 
-	if (!dock_station)
+	if (!dock_station_count)
 		return -ENODEV;
 
 	/*
 	 * make sure this handle is for a device dependent on the dock,
 	 * this would include the dock station itself
 	 */
-	dd = find_dock_dependent_device(dock_station, handle);
-	if (dd) {
-		dd->handler = handler;
-		dd->context = context;
-		dock_add_hotplug_device(dock_station, dd);
-		return 0;
+	list_for_each_entry(dock_station, &dock_stations, sibiling) {
+		/*
+		 * An ATA bay can be in a dock and itself can be ejected
+		 * seperately, so there are two 'dock stations' which need the
+		 * ops
+		 */
+		dd = find_dock_dependent_device(dock_station, handle);
+		if (dd) {
+			dd->ops = ops;
+			dd->context = context;
+			dock_add_hotplug_device(dock_station, dd);
+			ret = 0;
+		}
 	}
 
-	return -EINVAL;
+	return ret;
 }
 
 EXPORT_SYMBOL_GPL(register_hotplug_dock_device);
@@ -544,13 +646,16 @@
 void unregister_hotplug_dock_device(acpi_handle handle)
 {
 	struct dock_dependent_device *dd;
+	struct dock_station *dock_station;
 
-	if (!dock_station)
+	if (!dock_station_count)
 		return;
 
-	dd = find_dock_dependent_device(dock_station, handle);
-	if (dd)
-		dock_del_hotplug_device(dock_station, dd);
+	list_for_each_entry(dock_station, &dock_stations, sibiling) {
+		dd = find_dock_dependent_device(dock_station, handle);
+		if (dd)
+			dock_del_hotplug_device(dock_station, dd);
+	}
 }
 
 EXPORT_SYMBOL_GPL(unregister_hotplug_dock_device);
@@ -575,13 +680,9 @@
 	 */
 	dock_event(ds, event, UNDOCK_EVENT);
 
-	if (!dock_present(ds)) {
-		complete_undock(ds);
-		return -ENODEV;
-	}
-
 	hotplug_dock_devices(ds, ACPI_NOTIFY_EJECT_REQUEST);
 	undock(ds);
+	dock_lock(ds, 0);
 	eject_dock(ds);
 	if (dock_present(ds)) {
 		printk(KERN_ERR PREFIX "Unable to undock!\n");
@@ -604,14 +705,36 @@
 static void dock_notify(acpi_handle handle, u32 event, void *data)
 {
 	struct dock_station *ds = data;
+	struct acpi_device *tmp;
+	int surprise_removal = 0;
 
+	/*
+	 * According to acpi spec 3.0a, if a DEVICE_CHECK notification
+	 * is sent and _DCK is present, it is assumed to mean an undock
+	 * request.
+	 */
+	if ((ds->flags & DOCK_IS_DOCK) && event == ACPI_NOTIFY_DEVICE_CHECK)
+		event = ACPI_NOTIFY_EJECT_REQUEST;
+
+	/*
+	 * dock station: BUS_CHECK - docked or surprise removal
+	 *		 DEVICE_CHECK - undocked
+	 * other device: BUS_CHECK/DEVICE_CHECK - added or surprise removal
+	 *
+	 * To simplify event handling, dock dependent device handler always
+	 * get ACPI_NOTIFY_BUS_CHECK/ACPI_NOTIFY_DEVICE_CHECK for add and
+	 * ACPI_NOTIFY_EJECT_REQUEST for removal
+	 */
 	switch (event) {
 	case ACPI_NOTIFY_BUS_CHECK:
-		if (!dock_in_progress(ds) && dock_present(ds)) {
+	case ACPI_NOTIFY_DEVICE_CHECK:
+		if (!dock_in_progress(ds) && acpi_bus_get_device(ds->handle,
+		   &tmp)) {
 			begin_dock(ds);
 			dock(ds);
 			if (!dock_present(ds)) {
 				printk(KERN_ERR PREFIX "Unable to dock!\n");
+				complete_dock(ds);
 				break;
 			}
 			atomic_notifier_call_chain(&dock_notifier_list,
@@ -619,20 +742,19 @@
 			hotplug_dock_devices(ds, event);
 			complete_dock(ds);
 			dock_event(ds, event, DOCK_EVENT);
+			dock_lock(ds, 1);
+			break;
 		}
-		break;
-	case ACPI_NOTIFY_DEVICE_CHECK:
-	/*
-         * According to acpi spec 3.0a, if a DEVICE_CHECK notification
-         * is sent and _DCK is present, it is assumed to mean an
-         * undock request.  This notify routine will only be called
-         * for objects defining _DCK, so we will fall through to eject
-         * request here.  However, we will pass an eject request through
-	 * to the driver who wish to hotplug.
-         */
+		if (dock_present(ds) || dock_in_progress(ds))
+			break;
+		/* This is a surprise removal */
+		surprise_removal = 1;
+		event = ACPI_NOTIFY_EJECT_REQUEST;
+		/* Fall back */
 	case ACPI_NOTIFY_EJECT_REQUEST:
 		begin_undock(ds);
-		if (immediate_undock)
+		if ((immediate_undock && !(ds->flags & DOCK_IS_ATA))
+		   || surprise_removal)
 			handle_eject_request(ds, event);
 		else
 			dock_event(ds, event, UNDOCK_EVENT);
@@ -642,6 +764,51 @@
 	}
 }
 
+struct dock_data {
+	acpi_handle handle;
+	unsigned long event;
+	struct dock_station *ds;
+};
+
+static void acpi_dock_deferred_cb(void *context)
+{
+	struct dock_data *data = (struct dock_data *)context;
+
+	dock_notify(data->handle, data->event, data->ds);
+	kfree(data);
+}
+
+static int acpi_dock_notifier_call(struct notifier_block *this,
+	unsigned long event, void *data)
+{
+	struct dock_station *dock_station;
+	acpi_handle handle = (acpi_handle)data;
+
+	if (event != ACPI_NOTIFY_BUS_CHECK && event != ACPI_NOTIFY_DEVICE_CHECK
+	   && event != ACPI_NOTIFY_EJECT_REQUEST)
+		return 0;
+	list_for_each_entry(dock_station, &dock_stations, sibiling) {
+		if (dock_station->handle == handle) {
+			struct dock_data *dock_data;
+
+			dock_data = kmalloc(sizeof(*dock_data), GFP_KERNEL);
+			if (!dock_data)
+				return 0;
+			dock_data->handle = handle;
+			dock_data->event = event;
+			dock_data->ds = dock_station;
+			acpi_os_hotplug_execute(acpi_dock_deferred_cb,
+				dock_data);
+			return 0 ;
+		}
+	}
+	return 0;
+}
+
+static struct notifier_block dock_acpi_notifier = {
+	.notifier_call = acpi_dock_notifier_call,
+};
+
 /**
  * find_dock_devices - find devices on the dock station
  * @handle: the handle of the device we are examining
@@ -688,6 +855,8 @@
 static ssize_t show_docked(struct device *dev,
 			   struct device_attribute *attr, char *buf)
 {
+	struct dock_station *dock_station = *((struct dock_station **)
+		dev->platform_data);
 	return snprintf(buf, PAGE_SIZE, "%d\n", dock_present(dock_station));
 
 }
@@ -699,6 +868,8 @@
 static ssize_t show_flags(struct device *dev,
 			  struct device_attribute *attr, char *buf)
 {
+	struct dock_station *dock_station = *((struct dock_station **)
+		dev->platform_data);
 	return snprintf(buf, PAGE_SIZE, "%d\n", dock_station->flags);
 
 }
@@ -711,6 +882,8 @@
 			   const char *buf, size_t count)
 {
 	int ret;
+	struct dock_station *dock_station = *((struct dock_station **)
+		dev->platform_data);
 
 	if (!count)
 		return -EINVAL;
@@ -727,16 +900,38 @@
 static ssize_t show_dock_uid(struct device *dev,
 			     struct device_attribute *attr, char *buf)
 {
-	unsigned long lbuf;
+	unsigned long long lbuf;
+	struct dock_station *dock_station = *((struct dock_station **)
+		dev->platform_data);
 	acpi_status status = acpi_evaluate_integer(dock_station->handle,
 					"_UID", NULL, &lbuf);
 	if (ACPI_FAILURE(status))
 	    return 0;
 
-	return snprintf(buf, PAGE_SIZE, "%lx\n", lbuf);
+	return snprintf(buf, PAGE_SIZE, "%llx\n", lbuf);
 }
 static DEVICE_ATTR(uid, S_IRUGO, show_dock_uid, NULL);
 
+static ssize_t show_dock_type(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct dock_station *dock_station = *((struct dock_station **)
+		dev->platform_data);
+	char *type;
+
+	if (dock_station->flags & DOCK_IS_DOCK)
+		type = "dock_station";
+	else if (dock_station->flags & DOCK_IS_ATA)
+		type = "ata_bay";
+	else if (dock_station->flags & DOCK_IS_BAT)
+		type = "battery_bay";
+	else
+		type = "unknown";
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", type);
+}
+static DEVICE_ATTR(type, S_IRUGO, show_dock_type, NULL);
+
 /**
  * dock_add - add a new dock station
  * @handle: the dock station handle
@@ -747,8 +942,9 @@
 static int dock_add(acpi_handle handle)
 {
 	int ret;
-	acpi_status status;
 	struct dock_dependent_device *dd;
+	struct dock_station *dock_station;
+	struct platform_device *dock_device;
 
 	/* allocate & initialize the dock_station private data */
 	dock_station = kzalloc(sizeof(*dock_station), GFP_KERNEL);
@@ -758,22 +954,34 @@
 	dock_station->last_dock_time = jiffies - HZ;
 	INIT_LIST_HEAD(&dock_station->dependent_devices);
 	INIT_LIST_HEAD(&dock_station->hotplug_devices);
+	INIT_LIST_HEAD(&dock_station->sibiling);
 	spin_lock_init(&dock_station->dd_lock);
 	mutex_init(&dock_station->hp_lock);
 	ATOMIC_INIT_NOTIFIER_HEAD(&dock_notifier_list);
 
 	/* initialize platform device stuff */
-	dock_device =
-		platform_device_register_simple(dock_device_name, 0, NULL, 0);
+	dock_station->dock_device =
+		platform_device_register_simple(dock_device_name,
+			dock_station_count, NULL, 0);
+	dock_device = dock_station->dock_device;
 	if (IS_ERR(dock_device)) {
 		kfree(dock_station);
 		dock_station = NULL;
 		return PTR_ERR(dock_device);
 	}
+	platform_device_add_data(dock_device, &dock_station,
+		sizeof(struct dock_station *));
 
 	/* we want the dock device to send uevents */
 	dock_device->dev.uevent_suppress = 0;
 
+	if (is_dock(handle))
+		dock_station->flags |= DOCK_IS_DOCK;
+	if (is_ata(handle))
+		dock_station->flags |= DOCK_IS_ATA;
+	if (is_battery(handle))
+		dock_station->flags |= DOCK_IS_BAT;
+
 	ret = device_create_file(&dock_device->dev, &dev_attr_docked);
 	if (ret) {
 		printk("Error %d adding sysfs file\n", ret);
@@ -812,6 +1020,9 @@
 		dock_station = NULL;
 		return ret;
 	}
+	ret = device_create_file(&dock_device->dev, &dev_attr_type);
+	if (ret)
+		printk(KERN_ERR"Error %d adding sysfs file\n", ret);
 
 	/* Find dependent devices */
 	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
@@ -828,24 +1039,12 @@
 	}
 	add_dock_dependent_device(dock_station, dd);
 
-	/* register for dock events */
-	status = acpi_install_notify_handler(dock_station->handle,
-					     ACPI_SYSTEM_NOTIFY,
-					     dock_notify, dock_station);
-
-	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR PREFIX "Error installing notify handler\n");
-		ret = -ENODEV;
-		goto dock_add_err;
-	}
-
-	printk(KERN_INFO PREFIX "%s\n", ACPI_DOCK_DRIVER_DESCRIPTION);
-
+	dock_station_count++;
+	list_add(&dock_station->sibiling, &dock_stations);
 	return 0;
 
-dock_add_err:
-	kfree(dd);
 dock_add_err_unregister:
+	device_remove_file(&dock_device->dev, &dev_attr_type);
 	device_remove_file(&dock_device->dev, &dev_attr_docked);
 	device_remove_file(&dock_device->dev, &dev_attr_undock);
 	device_remove_file(&dock_device->dev, &dev_attr_uid);
@@ -859,12 +1058,12 @@
 /**
  * dock_remove - free up resources related to the dock station
  */
-static int dock_remove(void)
+static int dock_remove(struct dock_station *dock_station)
 {
 	struct dock_dependent_device *dd, *tmp;
-	acpi_status status;
+	struct platform_device *dock_device = dock_station->dock_device;
 
-	if (!dock_station)
+	if (!dock_station_count)
 		return 0;
 
 	/* remove dependent devices */
@@ -872,14 +1071,8 @@
 				 list)
 	    kfree(dd);
 
-	/* remove dock notify handler */
-	status = acpi_remove_notify_handler(dock_station->handle,
-					    ACPI_SYSTEM_NOTIFY,
-					    dock_notify);
-	if (ACPI_FAILURE(status))
-		printk(KERN_ERR "Error removing notify handler\n");
-
 	/* cleanup sysfs */
+	device_remove_file(&dock_device->dev, &dev_attr_type);
 	device_remove_file(&dock_device->dev, &dev_attr_docked);
 	device_remove_file(&dock_device->dev, &dev_attr_undock);
 	device_remove_file(&dock_device->dev, &dev_attr_uid);
@@ -904,41 +1097,60 @@
 static acpi_status
 find_dock(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
-	int *count = context;
 	acpi_status status = AE_OK;
 
 	if (is_dock(handle)) {
 		if (dock_add(handle) >= 0) {
-			(*count)++;
 			status = AE_CTRL_TERMINATE;
 		}
 	}
 	return status;
 }
 
+static acpi_status
+find_bay(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+	/* If bay is a dock, it's already handled */
+	if (is_ejectable_bay(handle) && !is_dock(handle))
+		dock_add(handle);
+	return AE_OK;
+}
+
 static int __init dock_init(void)
 {
-	int num = 0;
-
-	dock_station = NULL;
-
 	if (acpi_disabled)
 		return 0;
 
 	/* look for a dock station */
 	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
-			    ACPI_UINT32_MAX, find_dock, &num, NULL);
+			    ACPI_UINT32_MAX, find_dock, NULL, NULL);
 
-	if (!num)
-		printk(KERN_INFO "No dock devices found.\n");
+	/* look for bay */
+	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+			ACPI_UINT32_MAX, find_bay, NULL, NULL);
+	if (!dock_station_count) {
+		printk(KERN_INFO PREFIX "No dock devices found.\n");
+		return 0;
+	}
 
+	register_acpi_bus_notifier(&dock_acpi_notifier);
+	printk(KERN_INFO PREFIX "%s: %d docks/bays found\n",
+		ACPI_DOCK_DRIVER_DESCRIPTION, dock_station_count);
 	return 0;
 }
 
 static void __exit dock_exit(void)
 {
-	dock_remove();
+	struct dock_station *dock_station;
+
+	unregister_acpi_bus_notifier(&dock_acpi_notifier);
+	list_for_each_entry(dock_station, &dock_stations, sibiling)
+		dock_remove(dock_station);
 }
 
-postcore_initcall(dock_init);
+/*
+ * Must be called before drivers of devices in dock, otherwise we can't know
+ * which devices are in a dock
+ */
+subsys_initcall(dock_init);
 module_exit(dock_exit);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 13593f9..ef42316 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1,7 +1,7 @@
 /*
- *  ec.c - ACPI Embedded Controller Driver (v2.0)
+ *  ec.c - ACPI Embedded Controller Driver (v2.1)
  *
- *  Copyright (C) 2006, 2007 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
+ *  Copyright (C) 2006-2008 Alexey Starikovskiy <astarikovskiy@suse.de>
  *  Copyright (C) 2006 Denis Sadykov <denis.m.sadykov@intel.com>
  *  Copyright (C) 2004 Luming Yu <luming.yu@intel.com>
  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
@@ -26,7 +26,7 @@
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  */
 
-/* Uncomment next line to get verbose print outs*/
+/* Uncomment next line to get verbose printout */
 /* #define DEBUG */
 
 #include <linux/kernel.h>
@@ -38,6 +38,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/spinlock.h>
 #include <asm/io.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
@@ -65,22 +66,21 @@
 	ACPI_EC_COMMAND_QUERY = 0x84,
 };
 
-/* EC events */
-enum ec_event {
-	ACPI_EC_EVENT_OBF_1 = 1,	/* Output buffer full */
-	ACPI_EC_EVENT_IBF_0,		/* Input buffer empty */
-};
-
 #define ACPI_EC_DELAY		500	/* Wait 500ms max. during EC ops */
 #define ACPI_EC_UDELAY_GLK	1000	/* Wait 1ms max. to get global lock */
 #define ACPI_EC_UDELAY		100	/* Wait 100us before polling EC again */
 
+#define ACPI_EC_STORM_THRESHOLD 20	/* number of false interrupts
+					   per one transaction */
+
 enum {
-	EC_FLAGS_WAIT_GPE = 0,		/* Don't check status until GPE arrives */
 	EC_FLAGS_QUERY_PENDING,		/* Query is pending */
-	EC_FLAGS_GPE_MODE,		/* Expect GPE to be sent for status change */
+	EC_FLAGS_GPE_MODE,		/* Expect GPE to be sent
+					 * for status change */
 	EC_FLAGS_NO_GPE,		/* Don't use GPE mode */
-	EC_FLAGS_RESCHEDULE_POLL	/* Re-schedule poll */
+	EC_FLAGS_GPE_STORM,		/* GPE storm detected */
+	EC_FLAGS_HANDLERS_INSTALLED	/* Handlers for GPE and
+					 * OpReg are installed */
 };
 
 /* If we find an EC via the ECDT, we need to keep a ptr to its context */
@@ -95,6 +95,15 @@
 	u8 query_bit;
 };
 
+struct transaction {
+	const u8 *wdata;
+	u8 *rdata;
+	unsigned short irq_count;
+	u8 command;
+	u8 wlen;
+	u8 rlen;
+};
+
 static struct acpi_ec {
 	acpi_handle handle;
 	unsigned long gpe;
@@ -105,9 +114,8 @@
 	struct mutex lock;
 	wait_queue_head_t wait;
 	struct list_head list;
-	struct delayed_work work;
-	atomic_t irq_count;
-	u8 handlers_installed;
+	struct transaction *curr;
+	spinlock_t curr_lock;
 } *boot_ec, *first_ec;
 
 /* 
@@ -150,7 +158,7 @@
 {
 	u8 x = inb(ec->data_addr);
 	pr_debug(PREFIX "---> data = 0x%2.2x\n", x);
-	return inb(ec->data_addr);
+	return x;
 }
 
 static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command)
@@ -165,158 +173,172 @@
 	outb(data, ec->data_addr);
 }
 
-static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event)
+static int ec_transaction_done(struct acpi_ec *ec)
 {
-	if (test_bit(EC_FLAGS_WAIT_GPE, &ec->flags))
-		return 0;
-	if (event == ACPI_EC_EVENT_OBF_1) {
-		if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_OBF)
-			return 1;
-	} else if (event == ACPI_EC_EVENT_IBF_0) {
-		if (!(acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF))
-			return 1;
-	}
+	unsigned long flags;
+	int ret = 0;
+	spin_lock_irqsave(&ec->curr_lock, flags);
+	if (!ec->curr || (!ec->curr->wlen && !ec->curr->rlen))
+		ret = 1;
+	spin_unlock_irqrestore(&ec->curr_lock, flags);
+	return ret;
+}
 
+static void gpe_transaction(struct acpi_ec *ec, u8 status)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&ec->curr_lock, flags);
+	if (!ec->curr)
+		goto unlock;
+	if (ec->curr->wlen > 0) {
+		if ((status & ACPI_EC_FLAG_IBF) == 0) {
+			acpi_ec_write_data(ec, *(ec->curr->wdata++));
+			--ec->curr->wlen;
+		} else
+			/* false interrupt, state didn't change */
+			++ec->curr->irq_count;
+
+	} else if (ec->curr->rlen > 0) {
+		if ((status & ACPI_EC_FLAG_OBF) == 1) {
+			*(ec->curr->rdata++) = acpi_ec_read_data(ec);
+			--ec->curr->rlen;
+		} else
+			/* false interrupt, state didn't change */
+			++ec->curr->irq_count;
+	}
+unlock:
+	spin_unlock_irqrestore(&ec->curr_lock, flags);
+}
+
+static int acpi_ec_wait(struct acpi_ec *ec)
+{
+	if (wait_event_timeout(ec->wait, ec_transaction_done(ec),
+			       msecs_to_jiffies(ACPI_EC_DELAY)))
+		return 0;
+	/* missing GPEs, switch back to poll mode */
+	if (printk_ratelimit())
+		pr_info(PREFIX "missing confirmations, "
+				"switch off interrupt mode.\n");
+	set_bit(EC_FLAGS_NO_GPE, &ec->flags);
+	clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
+	return 1;
+}
+
+static void acpi_ec_gpe_query(void *ec_cxt);
+
+static int ec_check_sci(struct acpi_ec *ec, u8 state)
+{
+	if (state & ACPI_EC_FLAG_SCI) {
+		if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags))
+			return acpi_os_execute(OSL_EC_BURST_HANDLER,
+				acpi_ec_gpe_query, ec);
+	}
 	return 0;
 }
 
-static void ec_schedule_ec_poll(struct acpi_ec *ec)
+static int ec_poll(struct acpi_ec *ec)
 {
-	if (test_bit(EC_FLAGS_RESCHEDULE_POLL, &ec->flags))
-		schedule_delayed_work(&ec->work,
-				      msecs_to_jiffies(ACPI_EC_DELAY));
-}
-
-static void ec_switch_to_poll_mode(struct acpi_ec *ec)
-{
-	set_bit(EC_FLAGS_NO_GPE, &ec->flags);
-	clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
-	acpi_disable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
-	set_bit(EC_FLAGS_RESCHEDULE_POLL, &ec->flags);
-}
-
-static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
-{
-	atomic_set(&ec->irq_count, 0);
-	if (likely(test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) &&
-	    likely(!force_poll)) {
-		if (wait_event_timeout(ec->wait, acpi_ec_check_status(ec, event),
-				       msecs_to_jiffies(ACPI_EC_DELAY)))
-			return 0;
-		clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
-		if (acpi_ec_check_status(ec, event)) {
-			/* missing GPEs, switch back to poll mode */
-			if (printk_ratelimit())
-				pr_info(PREFIX "missing confirmations, "
-						"switch off interrupt mode.\n");
-			ec_switch_to_poll_mode(ec);
-			ec_schedule_ec_poll(ec);
-			return 0;
-		}
-	} else {
-		unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
-		clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
-		while (time_before(jiffies, delay)) {
-			if (acpi_ec_check_status(ec, event))
-				return 0;
-			msleep(1);
-		}
-		if (acpi_ec_check_status(ec,event))
+	unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
+	msleep(1);
+	while (time_before(jiffies, delay)) {
+		gpe_transaction(ec, acpi_ec_read_status(ec));
+		msleep(1);
+		if (ec_transaction_done(ec))
 			return 0;
 	}
-	pr_err(PREFIX "acpi_ec_wait timeout, status = 0x%2.2x, event = %s\n",
-		acpi_ec_read_status(ec),
-		(event == ACPI_EC_EVENT_OBF_1) ? "\"b0=1\"" : "\"b1=0\"");
 	return -ETIME;
 }
 
-static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
-					const u8 * wdata, unsigned wdata_len,
-					u8 * rdata, unsigned rdata_len,
+static int acpi_ec_transaction_unlocked(struct acpi_ec *ec,
+					struct transaction *t,
 					int force_poll)
 {
-	int result = 0;
-	set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
+	unsigned long tmp;
+	int ret = 0;
 	pr_debug(PREFIX "transaction start\n");
-	acpi_ec_write_cmd(ec, command);
-	for (; wdata_len > 0; --wdata_len) {
-		result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
-		if (result) {
-			pr_err(PREFIX
-			       "write_cmd timeout, command = %d\n", command);
-			goto end;
-		}
-		set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
-		acpi_ec_write_data(ec, *(wdata++));
+	/* disable GPE during transaction if storm is detected */
+	if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
+		clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
+		acpi_disable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
 	}
-
-	if (!rdata_len) {
-		result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
-		if (result) {
-			pr_err(PREFIX
-			       "finish-write timeout, command = %d\n", command);
-			goto end;
-		}
-	} else if (command == ACPI_EC_COMMAND_QUERY)
+	/* start transaction */
+	spin_lock_irqsave(&ec->curr_lock, tmp);
+	/* following two actions should be kept atomic */
+	t->irq_count = 0;
+	ec->curr = t;
+	acpi_ec_write_cmd(ec, ec->curr->command);
+	if (ec->curr->command == ACPI_EC_COMMAND_QUERY)
 		clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
-
-	for (; rdata_len > 0; --rdata_len) {
-		result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, force_poll);
-		if (result) {
-			pr_err(PREFIX "read timeout, command = %d\n", command);
-			goto end;
-		}
-		/* Don't expect GPE after last read */
-		if (rdata_len > 1)
-			set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
-		*(rdata++) = acpi_ec_read_data(ec);
-	}
-      end:
+	spin_unlock_irqrestore(&ec->curr_lock, tmp);
+	/* if we selected poll mode or failed in GPE-mode do a poll loop */
+	if (force_poll ||
+	    !test_bit(EC_FLAGS_GPE_MODE, &ec->flags) ||
+	    acpi_ec_wait(ec))
+		ret = ec_poll(ec);
 	pr_debug(PREFIX "transaction end\n");
-	return result;
+	spin_lock_irqsave(&ec->curr_lock, tmp);
+	ec->curr = NULL;
+	spin_unlock_irqrestore(&ec->curr_lock, tmp);
+	if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
+		/* check if we received SCI during transaction */
+		ec_check_sci(ec, acpi_ec_read_status(ec));
+		/* it is safe to enable GPE outside of transaction */
+		acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
+	} else if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags) &&
+		   t->irq_count > ACPI_EC_STORM_THRESHOLD) {
+		pr_debug(PREFIX "GPE storm detected\n");
+		set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
+	}
+	return ret;
 }
 
-static int acpi_ec_transaction(struct acpi_ec *ec, u8 command,
-			       const u8 * wdata, unsigned wdata_len,
-			       u8 * rdata, unsigned rdata_len,
+static int ec_check_ibf0(struct acpi_ec *ec)
+{
+	u8 status = acpi_ec_read_status(ec);
+	return (status & ACPI_EC_FLAG_IBF) == 0;
+}
+
+static int ec_wait_ibf0(struct acpi_ec *ec)
+{
+	unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
+	/* interrupt wait manually if GPE mode is not active */
+	unsigned long timeout = test_bit(EC_FLAGS_GPE_MODE, &ec->flags) ?
+		msecs_to_jiffies(ACPI_EC_DELAY) : msecs_to_jiffies(1);
+	while (time_before(jiffies, delay))
+		if (wait_event_timeout(ec->wait, ec_check_ibf0(ec), timeout))
+			return 0;
+	return -ETIME;
+}
+
+static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t,
 			       int force_poll)
 {
 	int status;
 	u32 glk;
-
-	if (!ec || (wdata_len && !wdata) || (rdata_len && !rdata))
+	if (!ec || (!t) || (t->wlen && !t->wdata) || (t->rlen && !t->rdata))
 		return -EINVAL;
-
-	if (rdata)
-		memset(rdata, 0, rdata_len);
-
+	if (t->rdata)
+		memset(t->rdata, 0, t->rlen);
 	mutex_lock(&ec->lock);
 	if (ec->global_lock) {
 		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
 		if (ACPI_FAILURE(status)) {
-			mutex_unlock(&ec->lock);
-			return -ENODEV;
+			status = -ENODEV;
+			goto unlock;
 		}
 	}
-
-	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0);
-	if (status) {
+	if (ec_wait_ibf0(ec)) {
 		pr_err(PREFIX "input buffer is not empty, "
 				"aborting transaction\n");
+		status = -ETIME;
 		goto end;
 	}
-
-	status = acpi_ec_transaction_unlocked(ec, command,
-					      wdata, wdata_len,
-					      rdata, rdata_len,
-					      force_poll);
-
-      end:
-
+	status = acpi_ec_transaction_unlocked(ec, t, force_poll);
+end:
 	if (ec->global_lock)
 		acpi_release_global_lock(glk);
+unlock:
 	mutex_unlock(&ec->lock);
-
 	return status;
 }
 
@@ -327,21 +349,32 @@
 int acpi_ec_burst_enable(struct acpi_ec *ec)
 {
 	u8 d;
-	return acpi_ec_transaction(ec, ACPI_EC_BURST_ENABLE, NULL, 0, &d, 1, 0);
+	struct transaction t = {.command = ACPI_EC_BURST_ENABLE,
+				.wdata = NULL, .rdata = &d,
+				.wlen = 0, .rlen = 1};
+
+	return acpi_ec_transaction(ec, &t, 0);
 }
 
 int acpi_ec_burst_disable(struct acpi_ec *ec)
 {
-	return acpi_ec_transaction(ec, ACPI_EC_BURST_DISABLE, NULL, 0, NULL, 0, 0);
+	struct transaction t = {.command = ACPI_EC_BURST_DISABLE,
+				.wdata = NULL, .rdata = NULL,
+				.wlen = 0, .rlen = 0};
+
+	return (acpi_ec_read_status(ec) & ACPI_EC_FLAG_BURST) ?
+				acpi_ec_transaction(ec, &t, 0) : 0;
 }
 
 static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 * data)
 {
 	int result;
 	u8 d;
+	struct transaction t = {.command = ACPI_EC_COMMAND_READ,
+				.wdata = &address, .rdata = &d,
+				.wlen = 1, .rlen = 1};
 
-	result = acpi_ec_transaction(ec, ACPI_EC_COMMAND_READ,
-				     &address, 1, &d, 1, 0);
+	result = acpi_ec_transaction(ec, &t, 0);
 	*data = d;
 	return result;
 }
@@ -349,8 +382,11 @@
 static int acpi_ec_write(struct acpi_ec *ec, u8 address, u8 data)
 {
 	u8 wdata[2] = { address, data };
-	return acpi_ec_transaction(ec, ACPI_EC_COMMAND_WRITE,
-				   wdata, 2, NULL, 0, 0);
+	struct transaction t = {.command = ACPI_EC_COMMAND_WRITE,
+				.wdata = wdata, .rdata = NULL,
+				.wlen = 2, .rlen = 0};
+
+	return acpi_ec_transaction(ec, &t, 0);
 }
 
 /*
@@ -412,12 +448,13 @@
 		   u8 * rdata, unsigned rdata_len,
 		   int force_poll)
 {
+	struct transaction t = {.command = command,
+				.wdata = wdata, .rdata = rdata,
+				.wlen = wdata_len, .rlen = rdata_len};
 	if (!first_ec)
 		return -ENODEV;
 
-	return acpi_ec_transaction(first_ec, command, wdata,
-				   wdata_len, rdata, rdata_len,
-				   force_poll);
+	return acpi_ec_transaction(first_ec, &t, force_poll);
 }
 
 EXPORT_SYMBOL(ec_transaction);
@@ -426,7 +463,9 @@
 {
 	int result;
 	u8 d;
-
+	struct transaction t = {.command = ACPI_EC_COMMAND_QUERY,
+				.wdata = NULL, .rdata = &d,
+				.wlen = 0, .rlen = 1};
 	if (!ec || !data)
 		return -EINVAL;
 
@@ -436,7 +475,7 @@
 	 * bit to be cleared (and thus clearing the interrupt source).
 	 */
 
-	result = acpi_ec_transaction(ec, ACPI_EC_COMMAND_QUERY, NULL, 0, &d, 1, 0);
+	result = acpi_ec_transaction(ec, &t, 0);
 	if (result)
 		return result;
 
@@ -513,46 +552,26 @@
 
 static u32 acpi_ec_gpe_handler(void *data)
 {
-	acpi_status status = AE_OK;
 	struct acpi_ec *ec = data;
-	u8 state = acpi_ec_read_status(ec);
+	u8 status;
 
 	pr_debug(PREFIX "~~~> interrupt\n");
-	atomic_inc(&ec->irq_count);
-	if (atomic_read(&ec->irq_count) > 5) {
-		pr_err(PREFIX "GPE storm detected, disabling EC GPE\n");
-		ec_switch_to_poll_mode(ec);
-		goto end;
-	}
-	clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
-	if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))
+	status = acpi_ec_read_status(ec);
+
+	gpe_transaction(ec, status);
+	if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0)
 		wake_up(&ec->wait);
 
-	if (state & ACPI_EC_FLAG_SCI) {
-		if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags))
-			status = acpi_os_execute(OSL_EC_BURST_HANDLER,
-				acpi_ec_gpe_query, ec);
-	} else if (!test_bit(EC_FLAGS_GPE_MODE, &ec->flags) &&
-		   !test_bit(EC_FLAGS_NO_GPE, &ec->flags) &&
-		   in_interrupt()) {
+	ec_check_sci(ec, status);
+	if (!test_bit(EC_FLAGS_GPE_MODE, &ec->flags) &&
+	    !test_bit(EC_FLAGS_NO_GPE, &ec->flags)) {
 		/* this is non-query, must be confirmation */
 		if (printk_ratelimit())
 			pr_info(PREFIX "non-query interrupt received,"
 				" switching to interrupt mode\n");
 		set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
-		clear_bit(EC_FLAGS_RESCHEDULE_POLL, &ec->flags);
 	}
-end:
-	ec_schedule_ec_poll(ec);
-	return ACPI_SUCCESS(status) ?
-	    ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED;
-}
-
-static void do_ec_poll(struct work_struct *work)
-{
-	struct acpi_ec *ec = container_of(work, struct acpi_ec, work.work);
-	atomic_set(&ec->irq_count, 0);
-	(void)acpi_ec_gpe_handler(ec);
+	return ACPI_INTERRUPT_HANDLED;
 }
 
 /* --------------------------------------------------------------------------
@@ -696,8 +715,7 @@
 	mutex_init(&ec->lock);
 	init_waitqueue_head(&ec->wait);
 	INIT_LIST_HEAD(&ec->list);
-	INIT_DELAYED_WORK_DEFERRABLE(&ec->work, do_ec_poll);
-	atomic_set(&ec->irq_count, 0);
+	spin_lock_init(&ec->curr_lock);
 	return ec;
 }
 
@@ -718,6 +736,7 @@
 ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval)
 {
 	acpi_status status;
+	unsigned long long tmp;
 
 	struct acpi_ec *ec = context;
 	status = acpi_walk_resources(handle, METHOD_NAME__CRS,
@@ -727,31 +746,26 @@
 
 	/* Get GPE bit assignment (EC events). */
 	/* TODO: Add support for _GPE returning a package */
-	status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec->gpe);
+	status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp);
 	if (ACPI_FAILURE(status))
 		return status;
+	ec->gpe = tmp;
 	/* Use the global lock for all EC transactions? */
-	acpi_evaluate_integer(handle, "_GLK", NULL, &ec->global_lock);
+	acpi_evaluate_integer(handle, "_GLK", NULL, &tmp);
+	ec->global_lock = tmp;
 	ec->handle = handle;
 	return AE_CTRL_TERMINATE;
 }
 
-static void ec_poll_stop(struct acpi_ec *ec)
-{
-	clear_bit(EC_FLAGS_RESCHEDULE_POLL, &ec->flags);
-	cancel_delayed_work(&ec->work);
-}
-
 static void ec_remove_handlers(struct acpi_ec *ec)
 {
-	ec_poll_stop(ec);
 	if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle,
 				ACPI_ADR_SPACE_EC, &acpi_ec_space_handler)))
 		pr_err(PREFIX "failed to remove space handler\n");
 	if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe,
 				&acpi_ec_gpe_handler)))
 		pr_err(PREFIX "failed to remove gpe handler\n");
-	ec->handlers_installed = 0;
+	clear_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags);
 }
 
 static int acpi_ec_add(struct acpi_device *device)
@@ -788,7 +802,7 @@
 
 	if (!first_ec)
 		first_ec = ec;
-	acpi_driver_data(device) = ec;
+	device->driver_data = ec;
 	acpi_ec_add_fs(device);
 	pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
 			  ec->gpe, ec->command_addr, ec->data_addr);
@@ -813,7 +827,7 @@
 	}
 	mutex_unlock(&ec->lock);
 	acpi_ec_remove_fs(device);
-	acpi_driver_data(device) = NULL;
+	device->driver_data = NULL;
 	if (ec == first_ec)
 		first_ec = NULL;
 	kfree(ec);
@@ -846,27 +860,36 @@
 static int ec_install_handlers(struct acpi_ec *ec)
 {
 	acpi_status status;
-	if (ec->handlers_installed)
+	if (test_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags))
 		return 0;
 	status = acpi_install_gpe_handler(NULL, ec->gpe,
-					  ACPI_GPE_EDGE_TRIGGERED,
-					  &acpi_ec_gpe_handler, ec);
+				  ACPI_GPE_EDGE_TRIGGERED,
+				  &acpi_ec_gpe_handler, ec);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
-
 	acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
 	acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
-
 	status = acpi_install_address_space_handler(ec->handle,
 						    ACPI_ADR_SPACE_EC,
 						    &acpi_ec_space_handler,
 						    NULL, ec);
 	if (ACPI_FAILURE(status)) {
-		acpi_remove_gpe_handler(NULL, ec->gpe, &acpi_ec_gpe_handler);
-		return -ENODEV;
+		if (status == AE_NOT_FOUND) {
+			/*
+			 * Maybe OS fails in evaluating the _REG object.
+			 * The AE_NOT_FOUND error will be ignored and OS
+			 * continue to initialize EC.
+			 */
+			printk(KERN_ERR "Fail in evaluating the _REG object"
+				" of EC device. Broken bios is suspected.\n");
+		} else {
+			acpi_remove_gpe_handler(NULL, ec->gpe,
+				&acpi_ec_gpe_handler);
+			return -ENODEV;
+		}
 	}
 
-	ec->handlers_installed = 1;
+	set_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags);
 	return 0;
 }
 
@@ -887,7 +910,6 @@
 
 	/* EC is fully operational, allow queries */
 	clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
-	ec_schedule_ec_poll(ec);
 	return ret;
 }
 
@@ -906,7 +928,7 @@
 
 int __init acpi_boot_ec_enable(void)
 {
-	if (!boot_ec || boot_ec->handlers_installed)
+	if (!boot_ec || test_bit(EC_FLAGS_HANDLERS_INSTALLED, &boot_ec->flags))
 		return 0;
 	if (!ec_install_handlers(boot_ec)) {
 		first_ec = boot_ec;
diff --git a/drivers/acpi/executer/exconfig.c b/drivers/acpi/executer/exconfig.c
index 8892b98..74da6fa 100644
--- a/drivers/acpi/executer/exconfig.c
+++ b/drivers/acpi/executer/exconfig.c
@@ -43,7 +43,6 @@
 
 #include <acpi/acpi.h>
 #include <acpi/acinterp.h>
-#include <acpi/amlcode.h>
 #include <acpi/acnamesp.h>
 #include <acpi/actables.h>
 #include <acpi/acdispat.h>
@@ -91,13 +90,12 @@
 
 	/* Init the table handle */
 
-	obj_desc->reference.opcode = AML_LOAD_OP;
+	obj_desc->reference.class = ACPI_REFCLASS_TABLE;
 	*ddb_handle = obj_desc;
 
 	/* Install the new table into the local data structures */
 
-	obj_desc->reference.object = ACPI_CAST_PTR(void,
-			(unsigned long)table_index);
+	obj_desc->reference.value = table_index;
 
 	/* Add the table to the namespace */
 
@@ -280,6 +278,7 @@
 		struct acpi_walk_state *walk_state)
 {
 	union acpi_operand_object *ddb_handle;
+	struct acpi_table_header *table;
 	struct acpi_table_desc table_desc;
 	u32 table_index;
 	acpi_status status;
@@ -294,9 +293,8 @@
 	switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
 	case ACPI_TYPE_REGION:
 
-		ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Load from Region %p %s\n",
-				  obj_desc,
-				  acpi_ut_get_object_type_name(obj_desc)));
+		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+				  "Load table from Region %p\n", obj_desc));
 
 		/* Region must be system_memory (from ACPI spec) */
 
@@ -316,22 +314,17 @@
 		}
 
 		/*
-		 * We will simply map the memory region for the table. However, the
-		 * memory region is technically not guaranteed to remain stable and
-		 * we may eventually have to copy the table to a local buffer.
+		 * Map the table header and get the actual table length. The region
+		 * length is not guaranteed to be the same as the table length.
 		 */
-		table_desc.address = obj_desc->region.address;
-		table_desc.length = obj_desc->region.length;
-		table_desc.flags = ACPI_TABLE_ORIGIN_MAPPED;
-		break;
+		table = acpi_os_map_memory(obj_desc->region.address,
+					   sizeof(struct acpi_table_header));
+		if (!table) {
+			return_ACPI_STATUS(AE_NO_MEMORY);
+		}
 
-	case ACPI_TYPE_BUFFER:	/* Buffer or resolved region_field */
-
-		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-				  "Load from Buffer or Field %p %s\n", obj_desc,
-				  acpi_ut_get_object_type_name(obj_desc)));
-
-		length = obj_desc->buffer.length;
+		length = table->length;
+		acpi_os_unmap_memory(table, sizeof(struct acpi_table_header));
 
 		/* Must have at least an ACPI table header */
 
@@ -339,38 +332,94 @@
 			return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
 		}
 
-		/* Validate checksum here. It won't get validated in tb_add_table */
+		/*
+		 * The memory region is not guaranteed to remain stable and we must
+		 * copy the table to a local buffer. For example, the memory region
+		 * is corrupted after suspend on some machines. Dynamically loaded
+		 * tables are usually small, so this overhead is minimal.
+		 */
 
-		status =
-		    acpi_tb_verify_checksum(ACPI_CAST_PTR
-					    (struct acpi_table_header,
-					     obj_desc->buffer.pointer), length);
-		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
+		/* Allocate a buffer for the table */
+
+		table_desc.pointer = ACPI_ALLOCATE(length);
+		if (!table_desc.pointer) {
+			return_ACPI_STATUS(AE_NO_MEMORY);
+		}
+
+		/* Map the entire table and copy it */
+
+		table = acpi_os_map_memory(obj_desc->region.address, length);
+		if (!table) {
+			ACPI_FREE(table_desc.pointer);
+			return_ACPI_STATUS(AE_NO_MEMORY);
+		}
+
+		ACPI_MEMCPY(table_desc.pointer, table, length);
+		acpi_os_unmap_memory(table, length);
+
+		table_desc.address = obj_desc->region.address;
+		break;
+
+	case ACPI_TYPE_BUFFER:	/* Buffer or resolved region_field */
+
+		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+				  "Load table from Buffer or Field %p\n",
+				  obj_desc));
+
+		/* Must have at least an ACPI table header */
+
+		if (obj_desc->buffer.length < sizeof(struct acpi_table_header)) {
+			return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
+		}
+
+		/* Get the actual table length from the table header */
+
+		table =
+		    ACPI_CAST_PTR(struct acpi_table_header,
+				  obj_desc->buffer.pointer);
+		length = table->length;
+
+		/* Table cannot extend beyond the buffer */
+
+		if (length > obj_desc->buffer.length) {
+			return_ACPI_STATUS(AE_AML_BUFFER_LIMIT);
+		}
+		if (length < sizeof(struct acpi_table_header)) {
+			return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
 		}
 
 		/*
-		 * We need to copy the buffer since the original buffer could be
-		 * changed or deleted in the future
+		 * Copy the table from the buffer because the buffer could be modified
+		 * or even deleted in the future
 		 */
 		table_desc.pointer = ACPI_ALLOCATE(length);
 		if (!table_desc.pointer) {
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}
 
-		ACPI_MEMCPY(table_desc.pointer, obj_desc->buffer.pointer,
-			    length);
-		table_desc.length = length;
-		table_desc.flags = ACPI_TABLE_ORIGIN_ALLOCATED;
+		ACPI_MEMCPY(table_desc.pointer, table, length);
+		table_desc.address = ACPI_TO_INTEGER(table_desc.pointer);
 		break;
 
 	default:
 		return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 	}
 
-	/*
-	 * Install the new table into the local data structures
-	 */
+	/* Validate table checksum (will not get validated in tb_add_table) */
+
+	status = acpi_tb_verify_checksum(table_desc.pointer, length);
+	if (ACPI_FAILURE(status)) {
+		ACPI_FREE(table_desc.pointer);
+		return_ACPI_STATUS(status);
+	}
+
+	/* Complete the table descriptor */
+
+	table_desc.length = length;
+	table_desc.flags = ACPI_TABLE_ORIGIN_ALLOCATED;
+
+	/* Install the new table into the local data structures */
+
 	status = acpi_tb_add_table(&table_desc, &table_index);
 	if (ACPI_FAILURE(status)) {
 		goto cleanup;
@@ -379,7 +428,7 @@
 	/*
 	 * Add the table to the namespace.
 	 *
-	 * Note: We load the table objects relative to the root of the namespace.
+	 * Note: Load the table objects relative to the root of the namespace.
 	 * This appears to go against the ACPI specification, but we do it for
 	 * compatibility with other ACPI implementations.
 	 */
@@ -415,7 +464,7 @@
       cleanup:
 	if (ACPI_FAILURE(status)) {
 
-		/* Delete allocated buffer or mapping */
+		/* Delete allocated table buffer */
 
 		acpi_tb_delete_table(&table_desc);
 	}
@@ -455,9 +504,9 @@
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
-	/* Get the table index from the ddb_handle (acpi_size for 64-bit case) */
+	/* Get the table index from the ddb_handle */
 
-	table_index = (u32) (acpi_size) table_desc->reference.object;
+	table_index = table_desc->reference.value;
 
 	/* Invoke table handler if present */
 
diff --git a/drivers/acpi/executer/exconvrt.c b/drivers/acpi/executer/exconvrt.c
index 261d975..1d1f35a 100644
--- a/drivers/acpi/executer/exconvrt.c
+++ b/drivers/acpi/executer/exconvrt.c
@@ -57,7 +57,7 @@
  *
  * FUNCTION:    acpi_ex_convert_to_integer
  *
- * PARAMETERS:  obj_desc        - Object to be converted.  Must be an
+ * PARAMETERS:  obj_desc        - Object to be converted. Must be an
  *                                Integer, Buffer, or String
  *              result_desc     - Where the new Integer object is returned
  *              Flags           - Used for string conversion
@@ -103,7 +103,7 @@
 	}
 
 	/*
-	 * Convert the buffer/string to an integer.  Note that both buffers and
+	 * Convert the buffer/string to an integer. Note that both buffers and
 	 * strings are treated as raw data - we don't convert ascii to hex for
 	 * strings.
 	 *
@@ -120,7 +120,7 @@
 
 		/*
 		 * Convert string to an integer - for most cases, the string must be
-		 * hexadecimal as per the ACPI specification.  The only exception (as
+		 * hexadecimal as per the ACPI specification. The only exception (as
 		 * of ACPI 3.0) is that the to_integer() operator allows both decimal
 		 * and hexadecimal strings (hex prefixed with "0x").
 		 */
@@ -159,6 +159,7 @@
 		break;
 
 	default:
+
 		/* No other types can get here */
 		break;
 	}
@@ -185,7 +186,7 @@
  *
  * FUNCTION:    acpi_ex_convert_to_buffer
  *
- * PARAMETERS:  obj_desc        - Object to be converted.  Must be an
+ * PARAMETERS:  obj_desc        - Object to be converted. Must be an
  *                                Integer, Buffer, or String
  *              result_desc     - Where the new buffer object is returned
  *
@@ -365,7 +366,7 @@
 	}
 
 	/*
-	 * Since leading zeros are supressed, we must check for the case where
+	 * Since leading zeros are suppressed, we must check for the case where
 	 * the integer equals 0
 	 *
 	 * Finally, null terminate the string and return the length
@@ -383,7 +384,7 @@
  *
  * FUNCTION:    acpi_ex_convert_to_string
  *
- * PARAMETERS:  obj_desc        - Object to be converted.  Must be an
+ * PARAMETERS:  obj_desc        - Object to be converted. Must be an
  *                                Integer, Buffer, or String
  *              result_desc     - Where the string object is returned
  *              Type            - String flags (base and conversion type)
@@ -472,7 +473,7 @@
 			base = 10;
 
 			/*
-			 * Calculate the final string length.  Individual string values
+			 * Calculate the final string length. Individual string values
 			 * are variable length (include separator for each)
 			 */
 			for (i = 0; i < obj_desc->buffer.length; i++) {
@@ -511,9 +512,14 @@
 		/*
 		 * Create a new string object and string buffer
 		 * (-1 because of extra separator included in string_length from above)
+		 * Allow creation of zero-length strings from zero-length buffers.
 		 */
+		if (string_length) {
+			string_length--;
+		}
+
 		return_desc = acpi_ut_create_string_object((acpi_size)
-							   (string_length - 1));
+							   string_length);
 		if (!return_desc) {
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}
@@ -536,7 +542,9 @@
 		 * Null terminate the string
 		 * (overwrites final comma/space from above)
 		 */
-		new_buf--;
+		if (obj_desc->buffer.length) {
+			new_buf--;
+		}
 		*new_buf = 0;
 		break;
 
@@ -617,7 +625,7 @@
 		case ACPI_TYPE_LOCAL_BANK_FIELD:
 		case ACPI_TYPE_LOCAL_INDEX_FIELD:
 			/*
-			 * These types require an Integer operand.  We can convert
+			 * These types require an Integer operand. We can convert
 			 * a Buffer or a String to an Integer if necessary.
 			 */
 			status =
@@ -627,7 +635,7 @@
 
 		case ACPI_TYPE_STRING:
 			/*
-			 * The operand must be a String.  We can convert an
+			 * The operand must be a String. We can convert an
 			 * Integer or Buffer if necessary
 			 */
 			status =
@@ -637,7 +645,7 @@
 
 		case ACPI_TYPE_BUFFER:
 			/*
-			 * The operand must be a Buffer.  We can convert an
+			 * The operand must be a Buffer. We can convert an
 			 * Integer or String if necessary
 			 */
 			status =
diff --git a/drivers/acpi/executer/exdump.c b/drivers/acpi/executer/exdump.c
index 2be2e2b..d087a7d 100644
--- a/drivers/acpi/executer/exdump.c
+++ b/drivers/acpi/executer/exdump.c
@@ -45,7 +45,6 @@
 #include <acpi/acinterp.h>
 #include <acpi/amlcode.h>
 #include <acpi/acnamesp.h>
-#include <acpi/acparser.h>
 
 #define _COMPONENT          ACPI_EXECUTER
 ACPI_MODULE_NAME("exdump")
@@ -214,10 +213,11 @@
 	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(index_field.data_obj), "Data Object"}
 };
 
-static struct acpi_exdump_info acpi_ex_dump_reference[7] = {
+static struct acpi_exdump_info acpi_ex_dump_reference[8] = {
 	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_reference), NULL},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(reference.class), "Class"},
 	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(reference.target_type), "Target Type"},
-	{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(reference.offset), "Offset"},
+	{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(reference.value), "Value"},
 	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(reference.object), "Object Desc"},
 	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(reference.node), "Node"},
 	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(reference.where), "Where"},
@@ -413,10 +413,10 @@
 
 		case ACPI_EXD_REFERENCE:
 
-			acpi_ex_out_string("Opcode",
-					   (acpi_ps_get_opcode_info
-					    (obj_desc->reference.opcode))->
-					   name);
+			acpi_ex_out_string("Class Name",
+					   (char *)
+					   acpi_ut_get_reference_name
+					   (obj_desc));
 			acpi_ex_dump_reference_obj(obj_desc);
 			break;
 
@@ -494,40 +494,41 @@
 	switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
 	case ACPI_TYPE_LOCAL_REFERENCE:
 
-		switch (obj_desc->reference.opcode) {
-		case AML_DEBUG_OP:
+		acpi_os_printf("Reference: [%s] ",
+			       acpi_ut_get_reference_name(obj_desc));
 
-			acpi_os_printf("Reference: Debug\n");
+		switch (obj_desc->reference.class) {
+		case ACPI_REFCLASS_DEBUG:
+
+			acpi_os_printf("\n");
 			break;
 
-		case AML_INDEX_OP:
+		case ACPI_REFCLASS_INDEX:
 
-			acpi_os_printf("Reference: Index %p\n",
-				       obj_desc->reference.object);
+			acpi_os_printf("%p\n", obj_desc->reference.object);
 			break;
 
-		case AML_LOAD_OP:
+		case ACPI_REFCLASS_TABLE:
 
-			acpi_os_printf("Reference: [DdbHandle] TableIndex %p\n",
-				       obj_desc->reference.object);
+			acpi_os_printf("Table Index %X\n",
+				       obj_desc->reference.value);
 			break;
 
-		case AML_REF_OF_OP:
+		case ACPI_REFCLASS_REFOF:
 
-			acpi_os_printf("Reference: (RefOf) %p [%s]\n",
-				       obj_desc->reference.object,
+			acpi_os_printf("%p [%s]\n", obj_desc->reference.object,
 				       acpi_ut_get_type_name(((union
 							       acpi_operand_object
-							       *)obj_desc->
+							       *)
+							      obj_desc->
 							      reference.
 							      object)->common.
 							     type));
 			break;
 
-		case AML_ARG_OP:
+		case ACPI_REFCLASS_ARG:
 
-			acpi_os_printf("Reference: Arg%d",
-				       obj_desc->reference.offset);
+			acpi_os_printf("%X", obj_desc->reference.value);
 
 			if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
 
@@ -542,10 +543,9 @@
 			acpi_os_printf("\n");
 			break;
 
-		case AML_LOCAL_OP:
+		case ACPI_REFCLASS_LOCAL:
 
-			acpi_os_printf("Reference: Local%d",
-				       obj_desc->reference.offset);
+			acpi_os_printf("%X", obj_desc->reference.value);
 
 			if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
 
@@ -560,21 +560,16 @@
 			acpi_os_printf("\n");
 			break;
 
-		case AML_INT_NAMEPATH_OP:
+		case ACPI_REFCLASS_NAME:
 
-			acpi_os_printf("Reference: Namepath %X [%4.4s]\n",
-				       obj_desc->reference.node->name.integer,
+			acpi_os_printf("- [%4.4s]\n",
 				       obj_desc->reference.node->name.ascii);
 			break;
 
-		default:
+		default:	/* Unknown reference class */
 
-			/* Unknown opcode */
-
-			acpi_os_printf("Unknown Reference opcode=%X\n",
-				       obj_desc->reference.opcode);
+			acpi_os_printf("%2.2X\n", obj_desc->reference.class);
 			break;
-
 		}
 		break;
 
@@ -865,8 +860,8 @@
 
 	ret_buf.length = ACPI_ALLOCATE_LOCAL_BUFFER;
 
-	if (obj_desc->reference.opcode == AML_INT_NAMEPATH_OP) {
-		acpi_os_printf(" Named Object %p ", obj_desc->reference.node);
+	if (obj_desc->reference.class == ACPI_REFCLASS_NAME) {
+		acpi_os_printf(" %p ", obj_desc->reference.node);
 
 		status =
 		    acpi_ns_handle_to_pathname(obj_desc->reference.node,
@@ -882,14 +877,12 @@
 		    ACPI_DESC_TYPE_OPERAND) {
 			acpi_os_printf(" Target: %p",
 				       obj_desc->reference.object);
-			if (obj_desc->reference.opcode == AML_LOAD_OP) {
-				/*
-				 * For DDBHandle reference,
-				 * obj_desc->Reference.Object is the table index
-				 */
-				acpi_os_printf(" [DDBHandle]\n");
+			if (obj_desc->reference.class == ACPI_REFCLASS_TABLE) {
+				acpi_os_printf(" Table Index: %X\n",
+					       obj_desc->reference.value);
 			} else {
-				acpi_os_printf(" [%s]\n",
+				acpi_os_printf(" Target: %p [%s]\n",
+					       obj_desc->reference.object,
 					       acpi_ut_get_type_name(((union
 								       acpi_operand_object
 								       *)
@@ -988,9 +981,9 @@
 
 	case ACPI_TYPE_LOCAL_REFERENCE:
 
-		acpi_os_printf("[Object Reference] %s",
-			       (acpi_ps_get_opcode_info
-				(obj_desc->reference.opcode))->name);
+		acpi_os_printf("[Object Reference] Type [%s] %2.2X",
+			       acpi_ut_get_reference_name(obj_desc),
+			       obj_desc->reference.class);
 		acpi_ex_dump_reference_obj(obj_desc);
 		break;
 
diff --git a/drivers/acpi/executer/exmisc.c b/drivers/acpi/executer/exmisc.c
index 731414a..efb1913 100644
--- a/drivers/acpi/executer/exmisc.c
+++ b/drivers/acpi/executer/exmisc.c
@@ -86,10 +86,10 @@
 		/*
 		 * Must be a reference to a Local or Arg
 		 */
-		switch (obj_desc->reference.opcode) {
-		case AML_LOCAL_OP:
-		case AML_ARG_OP:
-		case AML_DEBUG_OP:
+		switch (obj_desc->reference.class) {
+		case ACPI_REFCLASS_LOCAL:
+		case ACPI_REFCLASS_ARG:
+		case ACPI_REFCLASS_DEBUG:
 
 			/* The referenced object is the pseudo-node for the local/arg */
 
@@ -98,8 +98,8 @@
 
 		default:
 
-			ACPI_ERROR((AE_INFO, "Unknown Reference opcode %X",
-				    obj_desc->reference.opcode));
+			ACPI_ERROR((AE_INFO, "Unknown Reference Class %2.2X",
+				    obj_desc->reference.class));
 			return_ACPI_STATUS(AE_AML_INTERNAL);
 		}
 		break;
@@ -127,7 +127,7 @@
 		return_ACPI_STATUS(AE_NO_MEMORY);
 	}
 
-	reference_obj->reference.opcode = AML_REF_OF_OP;
+	reference_obj->reference.class = ACPI_REFCLASS_REFOF;
 	reference_obj->reference.object = referenced_obj;
 	*return_desc = reference_obj;
 
diff --git a/drivers/acpi/executer/exoparg1.c b/drivers/acpi/executer/exoparg1.c
index 7c3bea5..f622f9e 100644
--- a/drivers/acpi/executer/exoparg1.c
+++ b/drivers/acpi/executer/exoparg1.c
@@ -825,16 +825,16 @@
 				 *
 				 * Must resolve/dereference the local/arg reference first
 				 */
-				switch (operand[0]->reference.opcode) {
-				case AML_LOCAL_OP:
-				case AML_ARG_OP:
+				switch (operand[0]->reference.class) {
+				case ACPI_REFCLASS_LOCAL:
+				case ACPI_REFCLASS_ARG:
 
 					/* Set Operand[0] to the value of the local/arg */
 
 					status =
 					    acpi_ds_method_data_get_value
-					    (operand[0]->reference.opcode,
-					     operand[0]->reference.offset,
+					    (operand[0]->reference.class,
+					     operand[0]->reference.value,
 					     walk_state, &temp_desc);
 					if (ACPI_FAILURE(status)) {
 						goto cleanup;
@@ -848,7 +848,7 @@
 					operand[0] = temp_desc;
 					break;
 
-				case AML_REF_OF_OP:
+				case ACPI_REFCLASS_REFOF:
 
 					/* Get the object to which the reference refers */
 
@@ -928,8 +928,8 @@
 			 * This must be a reference object produced by either the
 			 * Index() or ref_of() operator
 			 */
-			switch (operand[0]->reference.opcode) {
-			case AML_INDEX_OP:
+			switch (operand[0]->reference.class) {
+			case ACPI_REFCLASS_INDEX:
 
 				/*
 				 * The target type for the Index operator must be
@@ -965,7 +965,7 @@
 					return_desc->integer.value =
 					    temp_desc->buffer.
 					    pointer[operand[0]->reference.
-						    offset];
+						    value];
 					break;
 
 				case ACPI_TYPE_PACKAGE:
@@ -985,7 +985,7 @@
 				default:
 
 					ACPI_ERROR((AE_INFO,
-						    "Unknown Index TargetType %X in obj %p",
+						    "Unknown Index TargetType %X in reference object %p",
 						    operand[0]->reference.
 						    target_type, operand[0]));
 					status = AE_AML_OPERAND_TYPE;
@@ -993,7 +993,7 @@
 				}
 				break;
 
-			case AML_REF_OF_OP:
+			case ACPI_REFCLASS_REFOF:
 
 				return_desc = operand[0]->reference.object;
 
@@ -1013,9 +1013,9 @@
 
 			default:
 				ACPI_ERROR((AE_INFO,
-					    "Unknown opcode in reference(%p) - %X",
+					    "Unknown class in reference(%p) - %2.2X",
 					    operand[0],
-					    operand[0]->reference.opcode));
+					    operand[0]->reference.class));
 
 				status = AE_TYPE;
 				goto cleanup;
diff --git a/drivers/acpi/executer/exoparg2.c b/drivers/acpi/executer/exoparg2.c
index 8e8bbb6..368def5 100644
--- a/drivers/acpi/executer/exoparg2.c
+++ b/drivers/acpi/executer/exoparg2.c
@@ -391,8 +391,8 @@
 		/* Initialize the Index reference object */
 
 		index = operand[1]->integer.value;
-		return_desc->reference.offset = (u32) index;
-		return_desc->reference.opcode = AML_INDEX_OP;
+		return_desc->reference.value = (u32) index;
+		return_desc->reference.class = ACPI_REFCLASS_INDEX;
 
 		/*
 		 * At this point, the Source operand is a String, Buffer, or Package.
diff --git a/drivers/acpi/executer/exresnte.c b/drivers/acpi/executer/exresnte.c
index 5596f42..423ad36 100644
--- a/drivers/acpi/executer/exresnte.c
+++ b/drivers/acpi/executer/exresnte.c
@@ -46,8 +46,6 @@
 #include <acpi/acdispat.h>
 #include <acpi/acinterp.h>
 #include <acpi/acnamesp.h>
-#include <acpi/acparser.h>
-#include <acpi/amlcode.h>
 
 #define _COMPONENT          ACPI_EXECUTER
 ACPI_MODULE_NAME("exresnte")
@@ -238,10 +236,10 @@
 
 	case ACPI_TYPE_LOCAL_REFERENCE:
 
-		switch (source_desc->reference.opcode) {
-		case AML_LOAD_OP:	/* This is a ddb_handle */
-		case AML_REF_OF_OP:
-		case AML_INDEX_OP:
+		switch (source_desc->reference.class) {
+		case ACPI_REFCLASS_TABLE:	/* This is a ddb_handle */
+		case ACPI_REFCLASS_REFOF:
+		case ACPI_REFCLASS_INDEX:
 
 			/* Return an additional reference to the object */
 
@@ -253,10 +251,8 @@
 			/* No named references are allowed here */
 
 			ACPI_ERROR((AE_INFO,
-				    "Unsupported Reference opcode %X (%s)",
-				    source_desc->reference.opcode,
-				    acpi_ps_get_opcode_name(source_desc->
-							    reference.opcode)));
+				    "Unsupported Reference type %X",
+				    source_desc->reference.class));
 
 			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 		}
diff --git a/drivers/acpi/executer/exresolv.c b/drivers/acpi/executer/exresolv.c
index b35f7c8..89571b9 100644
--- a/drivers/acpi/executer/exresolv.c
+++ b/drivers/acpi/executer/exresolv.c
@@ -47,7 +47,6 @@
 #include <acpi/acdispat.h>
 #include <acpi/acinterp.h>
 #include <acpi/acnamesp.h>
-#include <acpi/acparser.h>
 
 #define _COMPONENT          ACPI_EXECUTER
 ACPI_MODULE_NAME("exresolv")
@@ -141,7 +140,7 @@
 	acpi_status status = AE_OK;
 	union acpi_operand_object *stack_desc;
 	union acpi_operand_object *obj_desc = NULL;
-	u16 opcode;
+	u8 ref_type;
 
 	ACPI_FUNCTION_TRACE(ex_resolve_object_to_value);
 
@@ -152,19 +151,19 @@
 	switch (ACPI_GET_OBJECT_TYPE(stack_desc)) {
 	case ACPI_TYPE_LOCAL_REFERENCE:
 
-		opcode = stack_desc->reference.opcode;
+		ref_type = stack_desc->reference.class;
 
-		switch (opcode) {
-		case AML_LOCAL_OP:
-		case AML_ARG_OP:
+		switch (ref_type) {
+		case ACPI_REFCLASS_LOCAL:
+		case ACPI_REFCLASS_ARG:
 
 			/*
 			 * Get the local from the method's state info
 			 * Note: this increments the local's object reference count
 			 */
-			status = acpi_ds_method_data_get_value(opcode,
+			status = acpi_ds_method_data_get_value(ref_type,
 							       stack_desc->
-							       reference.offset,
+							       reference.value,
 							       walk_state,
 							       &obj_desc);
 			if (ACPI_FAILURE(status)) {
@@ -173,7 +172,7 @@
 
 			ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 					  "[Arg/Local %X] ValueObj is %p\n",
-					  stack_desc->reference.offset,
+					  stack_desc->reference.value,
 					  obj_desc));
 
 			/*
@@ -184,7 +183,7 @@
 			*stack_ptr = obj_desc;
 			break;
 
-		case AML_INDEX_OP:
+		case ACPI_REFCLASS_INDEX:
 
 			switch (stack_desc->reference.target_type) {
 			case ACPI_TYPE_BUFFER_FIELD:
@@ -239,15 +238,15 @@
 			}
 			break;
 
-		case AML_REF_OF_OP:
-		case AML_DEBUG_OP:
-		case AML_LOAD_OP:
+		case ACPI_REFCLASS_REFOF:
+		case ACPI_REFCLASS_DEBUG:
+		case ACPI_REFCLASS_TABLE:
 
 			/* Just leave the object as-is, do not dereference */
 
 			break;
 
-		case AML_INT_NAMEPATH_OP:	/* Reference to a named object */
+		case ACPI_REFCLASS_NAME:	/* Reference to a named object */
 
 			/* Dereference the name */
 
@@ -273,8 +272,7 @@
 		default:
 
 			ACPI_ERROR((AE_INFO,
-				    "Unknown Reference opcode %X (%s) in %p",
-				    opcode, acpi_ps_get_opcode_name(opcode),
+				    "Unknown Reference type %X in %p", ref_type,
 				    stack_desc));
 			status = AE_AML_INTERNAL;
 			break;
@@ -388,13 +386,13 @@
 	 * traversing the list of possibly many nested references.
 	 */
 	while (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_LOCAL_REFERENCE) {
-		switch (obj_desc->reference.opcode) {
-		case AML_REF_OF_OP:
-		case AML_INT_NAMEPATH_OP:
+		switch (obj_desc->reference.class) {
+		case ACPI_REFCLASS_REFOF:
+		case ACPI_REFCLASS_NAME:
 
 			/* Dereference the reference pointer */
 
-			if (obj_desc->reference.opcode == AML_REF_OF_OP) {
+			if (obj_desc->reference.class == ACPI_REFCLASS_REFOF) {
 				node = obj_desc->reference.object;
 			} else {	/* AML_INT_NAMEPATH_OP */
 
@@ -429,7 +427,7 @@
 			}
 			break;
 
-		case AML_INDEX_OP:
+		case ACPI_REFCLASS_INDEX:
 
 			/* Get the type of this reference (index into another object) */
 
@@ -455,22 +453,22 @@
 			}
 			break;
 
-		case AML_LOAD_OP:
+		case ACPI_REFCLASS_TABLE:
 
 			type = ACPI_TYPE_DDB_HANDLE;
 			goto exit;
 
-		case AML_LOCAL_OP:
-		case AML_ARG_OP:
+		case ACPI_REFCLASS_LOCAL:
+		case ACPI_REFCLASS_ARG:
 
 			if (return_desc) {
 				status =
 				    acpi_ds_method_data_get_value(obj_desc->
 								  reference.
-								  opcode,
+								  class,
 								  obj_desc->
 								  reference.
-								  offset,
+								  value,
 								  walk_state,
 								  &obj_desc);
 				if (ACPI_FAILURE(status)) {
@@ -481,10 +479,10 @@
 				status =
 				    acpi_ds_method_data_get_node(obj_desc->
 								 reference.
-								 opcode,
+								 class,
 								 obj_desc->
 								 reference.
-								 offset,
+								 value,
 								 walk_state,
 								 &node);
 				if (ACPI_FAILURE(status)) {
@@ -499,7 +497,7 @@
 			}
 			break;
 
-		case AML_DEBUG_OP:
+		case ACPI_REFCLASS_DEBUG:
 
 			/* The Debug Object is of type "DebugObject" */
 
@@ -509,8 +507,8 @@
 		default:
 
 			ACPI_ERROR((AE_INFO,
-				    "Unknown Reference subtype %X",
-				    obj_desc->reference.opcode));
+				    "Unknown Reference Class %2.2X",
+				    obj_desc->reference.class));
 			return_ACPI_STATUS(AE_AML_INTERNAL);
 		}
 	}
diff --git a/drivers/acpi/executer/exresop.c b/drivers/acpi/executer/exresop.c
index 54085f1..0bb8259 100644
--- a/drivers/acpi/executer/exresop.c
+++ b/drivers/acpi/executer/exresop.c
@@ -225,41 +225,36 @@
 
 			if (object_type == (u8) ACPI_TYPE_LOCAL_REFERENCE) {
 
-				/* Decode the Reference */
+				/* Validate the Reference */
 
-				op_info = acpi_ps_get_opcode_info(opcode);
-				if (op_info->class == AML_CLASS_UNKNOWN) {
-					return_ACPI_STATUS(AE_AML_BAD_OPCODE);
-				}
+				switch (obj_desc->reference.class) {
+				case ACPI_REFCLASS_DEBUG:
 
-				switch (obj_desc->reference.opcode) {
-				case AML_DEBUG_OP:
 					target_op = AML_DEBUG_OP;
 
 					/*lint -fallthrough */
 
-				case AML_INDEX_OP:
-				case AML_REF_OF_OP:
-				case AML_ARG_OP:
-				case AML_LOCAL_OP:
-				case AML_LOAD_OP:	/* ddb_handle from LOAD_OP or LOAD_TABLE_OP */
-				case AML_INT_NAMEPATH_OP:	/* Reference to a named object */
+				case ACPI_REFCLASS_ARG:
+				case ACPI_REFCLASS_LOCAL:
+				case ACPI_REFCLASS_INDEX:
+				case ACPI_REFCLASS_REFOF:
+				case ACPI_REFCLASS_TABLE:	/* ddb_handle from LOAD_OP or LOAD_TABLE_OP */
+				case ACPI_REFCLASS_NAME:	/* Reference to a named object */
 
-					ACPI_DEBUG_ONLY_MEMBERS(ACPI_DEBUG_PRINT
-								((ACPI_DB_EXEC,
-								  "Operand is a Reference, RefOpcode [%s]\n",
-								  (acpi_ps_get_opcode_info
-								   (obj_desc->
-								    reference.
-								    opcode))->
-								  name)));
+					ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+							  "Operand is a Reference, Class [%s] %2.2X\n",
+							  acpi_ut_get_reference_name
+							  (obj_desc),
+							  obj_desc->reference.
+							  class));
 					break;
 
 				default:
+
 					ACPI_ERROR((AE_INFO,
-						    "Operand is a Reference, Unknown Reference Opcode: %X",
-						    obj_desc->reference.
-						    opcode));
+						    "Unknown Reference Class %2.2X in %p",
+						    obj_desc->reference.class,
+						    obj_desc));
 
 					return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 				}
@@ -270,8 +265,7 @@
 
 			/* Invalid descriptor */
 
-			ACPI_ERROR((AE_INFO,
-				    "Invalid descriptor %p [%s]",
+			ACPI_ERROR((AE_INFO, "Invalid descriptor %p [%s]",
 				    obj_desc,
 				    acpi_ut_get_descriptor_name(obj_desc)));
 
@@ -343,7 +337,7 @@
 			if ((opcode == AML_STORE_OP) &&
 			    (ACPI_GET_OBJECT_TYPE(*stack_ptr) ==
 			     ACPI_TYPE_LOCAL_REFERENCE)
-			    && ((*stack_ptr)->reference.opcode == AML_INDEX_OP)) {
+			    && ((*stack_ptr)->reference.class == ACPI_REFCLASS_INDEX)) {
 				goto next_operand;
 			}
 			break;
diff --git a/drivers/acpi/executer/exstore.c b/drivers/acpi/executer/exstore.c
index 38b55e3..3318df4 100644
--- a/drivers/acpi/executer/exstore.c
+++ b/drivers/acpi/executer/exstore.c
@@ -47,7 +47,6 @@
 #include <acpi/acinterp.h>
 #include <acpi/amlcode.h>
 #include <acpi/acnamesp.h>
-#include <acpi/acparser.h>
 
 #define _COMPONENT          ACPI_EXECUTER
 ACPI_MODULE_NAME("exstore")
@@ -179,22 +178,26 @@
 
 	case ACPI_TYPE_LOCAL_REFERENCE:
 
-		if (source_desc->reference.opcode == AML_INDEX_OP) {
-			ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT,
-					      "[%s, 0x%X]\n",
-					      acpi_ps_get_opcode_name
-					      (source_desc->reference.opcode),
-					      source_desc->reference.offset));
-		} else {
-			ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[%s]",
-					      acpi_ps_get_opcode_name
-					      (source_desc->reference.opcode)));
-		}
+		ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[%s] ",
+				      acpi_ut_get_reference_name(source_desc)));
 
-		if (source_desc->reference.opcode == AML_LOAD_OP) {	/* Load and load_table */
+		/* Decode the reference */
+
+		switch (source_desc->reference.class) {
+		case ACPI_REFCLASS_INDEX:
+
+			ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "0x%X\n",
+					      source_desc->reference.value));
+			break;
+
+		case ACPI_REFCLASS_TABLE:
+
 			ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT,
-					      " Table OwnerId %p\n",
-					      source_desc->reference.object));
+					      "Table Index 0x%X\n",
+					      source_desc->reference.value));
+			break;
+
+		default:
 			break;
 		}
 
@@ -347,15 +350,15 @@
 	}
 
 	/*
-	 * Examine the Reference opcode.  These cases are handled:
+	 * Examine the Reference class. These cases are handled:
 	 *
 	 * 1) Store to Name (Change the object associated with a name)
 	 * 2) Store to an indexed area of a Buffer or Package
 	 * 3) Store to a Method Local or Arg
 	 * 4) Store to the debug object
 	 */
-	switch (ref_desc->reference.opcode) {
-	case AML_REF_OF_OP:
+	switch (ref_desc->reference.class) {
+	case ACPI_REFCLASS_REFOF:
 
 		/* Storing an object into a Name "container" */
 
@@ -365,7 +368,7 @@
 						      ACPI_IMPLICIT_CONVERSION);
 		break;
 
-	case AML_INDEX_OP:
+	case ACPI_REFCLASS_INDEX:
 
 		/* Storing to an Index (pointer into a packager or buffer) */
 
@@ -374,18 +377,18 @@
 						  walk_state);
 		break;
 
-	case AML_LOCAL_OP:
-	case AML_ARG_OP:
+	case ACPI_REFCLASS_LOCAL:
+	case ACPI_REFCLASS_ARG:
 
 		/* Store to a method local/arg  */
 
 		status =
-		    acpi_ds_store_object_to_local(ref_desc->reference.opcode,
-						  ref_desc->reference.offset,
+		    acpi_ds_store_object_to_local(ref_desc->reference.class,
+						  ref_desc->reference.value,
 						  source_desc, walk_state);
 		break;
 
-	case AML_DEBUG_OP:
+	case ACPI_REFCLASS_DEBUG:
 
 		/*
 		 * Storing to the Debug object causes the value stored to be
@@ -401,9 +404,9 @@
 
 	default:
 
-		ACPI_ERROR((AE_INFO, "Unknown Reference opcode %X",
-			    ref_desc->reference.opcode));
-		ACPI_DUMP_ENTRY(ref_desc, ACPI_LV_ERROR);
+		ACPI_ERROR((AE_INFO, "Unknown Reference Class %2.2X",
+			    ref_desc->reference.class));
+		ACPI_DUMP_ENTRY(ref_desc, ACPI_LV_INFO);
 
 		status = AE_AML_INTERNAL;
 		break;
@@ -458,7 +461,7 @@
 
 		if (ACPI_GET_OBJECT_TYPE(source_desc) ==
 		    ACPI_TYPE_LOCAL_REFERENCE
-		    && source_desc->reference.opcode == AML_LOAD_OP) {
+		    && source_desc->reference.class == ACPI_REFCLASS_TABLE) {
 
 			/* This is a DDBHandle, just add a reference to it */
 
@@ -553,7 +556,7 @@
 
 		/* Store the source value into the target buffer byte */
 
-		obj_desc->buffer.pointer[index_desc->reference.offset] = value;
+		obj_desc->buffer.pointer[index_desc->reference.value] = value;
 		break;
 
 	default:
diff --git a/drivers/acpi/executer/exstoren.c b/drivers/acpi/executer/exstoren.c
index a6d2168..eef61a0 100644
--- a/drivers/acpi/executer/exstoren.c
+++ b/drivers/acpi/executer/exstoren.c
@@ -121,7 +121,8 @@
 		    (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_STRING) &&
 		    !((ACPI_GET_OBJECT_TYPE(source_desc) ==
 		       ACPI_TYPE_LOCAL_REFERENCE)
-		      && (source_desc->reference.opcode == AML_LOAD_OP))) {
+		      && (source_desc->reference.class ==
+			  ACPI_REFCLASS_TABLE))) {
 
 			/* Conversion successful but still not a valid type */
 
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index 2655bc1..60d54d1 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -265,7 +265,7 @@
 
 	dev_info(&device->dev, "registered as cooling_device%d\n", cdev->id);
 
-	acpi_driver_data(device) = cdev;
+	device->driver_data = cdev;
 	result = sysfs_create_link(&device->dev.kobj,
 				   &cdev->device.kobj,
 				   "thermal_cooling");
@@ -327,8 +327,8 @@
 
 	result = acpi_bus_get_power(device->handle, &power_state);
 	if (result) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Error reading fan power state\n"));
+		printk(KERN_ERR PREFIX
+				  "Error reading fan power state\n");
 		return result;
 	}
 
diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c
index dba3cfb..25dccdf 100644
--- a/drivers/acpi/hardware/hwsleep.c
+++ b/drivers/acpi/hardware/hwsleep.c
@@ -78,19 +78,17 @@
 		return_ACPI_STATUS(status);
 	}
 
-	/* Set the vector */
+	/*
+	 * According to the ACPI specification 2.0c and later, the 64-bit
+	 * waking vector should be cleared and the 32-bit waking vector should
+	 * be used, unless we want the wake-up code to be called by the BIOS in
+	 * Protected Mode.  Some systems (for example HP dv5-1004nr) are known
+	 * to fail to resume if the 64-bit vector is used.
+	 */
+	if (facs->version >= 1)
+		facs->xfirmware_waking_vector = 0;
 
-	if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) {
-		/*
-		 * ACPI 1.0 FACS or short table or optional X_ field is zero
-		 */
-		facs->firmware_waking_vector = (u32) physical_address;
-	} else {
-		/*
-		 * ACPI 2.0 FACS with valid X_ field
-		 */
-		facs->xfirmware_waking_vector = physical_address;
-	}
+	facs->firmware_waking_vector = (u32)physical_address;
 
 	return_ACPI_STATUS(AE_OK);
 }
@@ -134,20 +132,7 @@
 	}
 
 	/* Get the vector */
-
-	if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) {
-		/*
-		 * ACPI 1.0 FACS or short table or optional X_ field is zero
-		 */
-		*physical_address =
-		    (acpi_physical_address) facs->firmware_waking_vector;
-	} else {
-		/*
-		 * ACPI 2.0 FACS with valid X_ field
-		 */
-		*physical_address =
-		    (acpi_physical_address) facs->xfirmware_waking_vector;
-	}
+	*physical_address = (acpi_physical_address)facs->firmware_waking_vector;
 
 	return_ACPI_STATUS(AE_OK);
 }
@@ -627,6 +612,13 @@
 	}
 	/* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */
 
+	/*
+	 * Some BIOSes assume that WAK_STS will be cleared on resume and use
+	 * it to determine whether the system is rebooting or resuming. Clear
+	 * it for compatibility.
+	 */
+	acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1);
+
 	acpi_gbl_system_awake_and_running = TRUE;
 
 	/* Enable power button */
diff --git a/drivers/acpi/namespace/Makefile b/drivers/acpi/namespace/Makefile
index 3f63d36..371a2da 100644
--- a/drivers/acpi/namespace/Makefile
+++ b/drivers/acpi/namespace/Makefile
@@ -5,7 +5,7 @@
 obj-y := nsaccess.o  nsload.o    nssearch.o  nsxfeval.o \
 	 nsalloc.o   nseval.o    nsnames.o   nsutils.o   nsxfname.o \
 	 nsdump.o    nsinit.o    nsobject.o  nswalk.o    nsxfobj.o  \
-	 nsparse.o
+	 nsparse.o   nspredef.o
 
 obj-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
 
diff --git a/drivers/acpi/namespace/nsdump.c b/drivers/acpi/namespace/nsdump.c
index 0ab2200..cc0ae39 100644
--- a/drivers/acpi/namespace/nsdump.c
+++ b/drivers/acpi/namespace/nsdump.c
@@ -43,7 +43,6 @@
 
 #include <acpi/acpi.h>
 #include <acpi/acnamesp.h>
-#include <acpi/acparser.h>
 
 #define _COMPONENT          ACPI_NAMESPACE
 ACPI_MODULE_NAME("nsdump")
@@ -334,9 +333,7 @@
 		case ACPI_TYPE_LOCAL_REFERENCE:
 
 			acpi_os_printf("[%s]\n",
-				       acpi_ps_get_opcode_name(obj_desc->
-							       reference.
-							       opcode));
+				       acpi_ut_get_reference_name(obj_desc));
 			break;
 
 		case ACPI_TYPE_BUFFER_FIELD:
diff --git a/drivers/acpi/namespace/nseval.c b/drivers/acpi/namespace/nseval.c
index d369164..4cdf03a 100644
--- a/drivers/acpi/namespace/nseval.c
+++ b/drivers/acpi/namespace/nseval.c
@@ -78,6 +78,7 @@
 acpi_status acpi_ns_evaluate(struct acpi_evaluate_info * info)
 {
 	acpi_status status;
+	struct acpi_namespace_node *node;
 
 	ACPI_FUNCTION_TRACE(ns_evaluate);
 
@@ -117,6 +118,8 @@
 			  info->resolved_node,
 			  acpi_ns_get_attached_object(info->resolved_node)));
 
+	node = info->resolved_node;
+
 	/*
 	 * Two major cases here:
 	 *
@@ -148,21 +151,22 @@
 				info->param_count++;
 		}
 
-		/* Error if too few arguments were passed in */
+		/*
+		 * Warning if too few or too many arguments have been passed by the
+		 * caller. We don't want to abort here with an error because an
+		 * incorrect number of arguments may not cause the method to fail.
+		 * However, the method will fail if there are too few arguments passed
+		 * and the method attempts to use one of the missing ones.
+		 */
 
 		if (info->param_count < info->obj_desc->method.param_count) {
-			ACPI_ERROR((AE_INFO,
+			ACPI_WARNING((AE_INFO,
 				    "Insufficient arguments - "
 				    "method [%4.4s] needs %d, found %d",
 				    acpi_ut_get_node_name(info->resolved_node),
 				    info->obj_desc->method.param_count,
 				    info->param_count));
-			return_ACPI_STATUS(AE_MISSING_ARGUMENTS);
-		}
-
-		/* Just a warning if too many arguments */
-
-		else if (info->param_count >
+		} else if (info->param_count >
 				info->obj_desc->method.param_count) {
 			ACPI_WARNING((AE_INFO,
 				      "Excess arguments - "
@@ -195,7 +199,28 @@
 	} else {
 		/*
 		 * 2) Object is not a method, return its current value
+		 *
+		 * Disallow certain object types. For these, "evaluation" is undefined.
 		 */
+		switch (info->resolved_node->type) {
+		case ACPI_TYPE_DEVICE:
+		case ACPI_TYPE_EVENT:
+		case ACPI_TYPE_MUTEX:
+		case ACPI_TYPE_REGION:
+		case ACPI_TYPE_THERMAL:
+		case ACPI_TYPE_LOCAL_SCOPE:
+
+			ACPI_ERROR((AE_INFO,
+				    "[%4.4s] Evaluation of object type [%s] is not supported",
+				    info->resolved_node->name.ascii,
+				    acpi_ut_get_type_name(info->resolved_node->
+							  type)));
+
+			return_ACPI_STATUS(AE_TYPE);
+
+		default:
+			break;
+		}
 
 		/*
 		 * Objects require additional resolution steps (e.g., the Node may be
@@ -239,9 +264,35 @@
 		}
 	}
 
-	/*
-	 * Check if there is a return value that must be dealt with
-	 */
+	/* Validation of return values for ACPI-predefined methods and objects */
+
+	if ((status == AE_OK) || (status == AE_CTRL_RETURN_VALUE)) {
+		/*
+		 * If this is the first evaluation, check the return value. This
+		 * ensures that any warnings will only be emitted during the very
+		 * first evaluation of the object.
+		 */
+		if (!(node->flags & ANOBJ_EVALUATED)) {
+			/*
+			 * Check for a predefined ACPI name. If found, validate the
+			 * returned object.
+			 *
+			 * Note: Ignore return status for now, emit warnings if there are
+			 * problems with the returned object. May change later to abort
+			 * the method on invalid return object.
+			 */
+			(void)acpi_ns_check_predefined_names(node,
+							     info->
+							     return_object);
+		}
+
+		/* Mark the node as having been evaluated */
+
+		node->flags |= ANOBJ_EVALUATED;
+	}
+
+	/* Check if there is a return value that must be dealt with */
+
 	if (status == AE_CTRL_RETURN_VALUE) {
 
 		/* If caller does not want the return value, delete it */
diff --git a/drivers/acpi/namespace/nsnames.c b/drivers/acpi/namespace/nsnames.c
index bd57738..42a39a7 100644
--- a/drivers/acpi/namespace/nsnames.c
+++ b/drivers/acpi/namespace/nsnames.c
@@ -115,7 +115,6 @@
 	return (AE_OK);
 }
 
-#ifdef ACPI_DEBUG_OUTPUT
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ns_get_external_pathname
@@ -142,7 +141,7 @@
 
 	size = acpi_ns_get_pathname_length(node);
 	if (!size) {
-		return (NULL);
+		return_PTR(NULL);
 	}
 
 	/* Allocate a buffer to be returned to caller */
@@ -157,12 +156,12 @@
 
 	status = acpi_ns_build_external_path(node, size, name_buffer);
 	if (ACPI_FAILURE(status)) {
-		return (NULL);
+		ACPI_FREE(name_buffer);
+		return_PTR(NULL);
 	}
 
 	return_PTR(name_buffer);
 }
-#endif
 
 /*******************************************************************************
  *
diff --git a/drivers/acpi/namespace/nspredef.c b/drivers/acpi/namespace/nspredef.c
new file mode 100644
index 0000000..0f17cf0
--- /dev/null
+++ b/drivers/acpi/namespace/nspredef.c
@@ -0,0 +1,900 @@
+/******************************************************************************
+ *
+ * Module Name: nspredef - Validation of ACPI predefined methods and objects
+ *              $Revision: 1.1 $
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2008, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acpredef.h>
+
+#define _COMPONENT          ACPI_NAMESPACE
+ACPI_MODULE_NAME("nspredef")
+
+/*******************************************************************************
+ *
+ * This module validates predefined ACPI objects that appear in the namespace,
+ * at the time they are evaluated (via acpi_evaluate_object). The purpose of this
+ * validation is to detect problems with BIOS-exposed predefined ACPI objects
+ * before the results are returned to the ACPI-related drivers.
+ *
+ * There are several areas that are validated:
+ *
+ *  1) The number of input arguments as defined by the method/object in the
+ *      ASL is validated against the ACPI specification.
+ *  2) The type of the return object (if any) is validated against the ACPI
+ *      specification.
+ *  3) For returned package objects, the count of package elements is
+ *      validated, as well as the type of each package element. Nested
+ *      packages are supported.
+ *
+ * For any problems found, a warning message is issued.
+ *
+ ******************************************************************************/
+/* Local prototypes */
+static acpi_status
+acpi_ns_check_package(char *pathname,
+		      union acpi_operand_object *return_object,
+		      const union acpi_predefined_info *predefined);
+
+static acpi_status
+acpi_ns_check_package_elements(char *pathname,
+			       union acpi_operand_object **elements,
+			       u8 type1, u32 count1, u8 type2, u32 count2);
+
+static acpi_status
+acpi_ns_check_object_type(char *pathname,
+			  union acpi_operand_object *return_object,
+			  u32 expected_btypes, u32 package_index);
+
+static acpi_status
+acpi_ns_check_reference(char *pathname,
+			union acpi_operand_object *return_object);
+
+/*
+ * Names for the types that can be returned by the predefined objects.
+ * Used for warning messages. Must be in the same order as the ACPI_RTYPEs
+ */
+static const char *acpi_rtype_names[] = {
+	"/Integer",
+	"/String",
+	"/Buffer",
+	"/Package",
+	"/Reference",
+};
+
+#define ACPI_NOT_PACKAGE    ACPI_UINT32_MAX
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ns_check_predefined_names
+ *
+ * PARAMETERS:  Node            - Namespace node for the method/object
+ *              return_object   - Object returned from the evaluation of this
+ *                                method/object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Check an ACPI name for a match in the predefined name list.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ns_check_predefined_names(struct acpi_namespace_node *node,
+			       union acpi_operand_object *return_object)
+{
+	acpi_status status = AE_OK;
+	const union acpi_predefined_info *predefined;
+	char *pathname;
+
+	/* Match the name for this method/object against the predefined list */
+
+	predefined = acpi_ns_check_for_predefined_name(node);
+	if (!predefined) {
+
+		/* Name was not one of the predefined names */
+
+		return (AE_OK);
+	}
+
+	/* Get the full pathname to the object, for use in error messages */
+
+	pathname = acpi_ns_get_external_pathname(node);
+	if (!pathname) {
+		pathname = ACPI_CAST_PTR(char, predefined->info.name);
+	}
+
+	/*
+	 * Check that the parameter count for this method is in accordance
+	 * with the ACPI specification.
+	 */
+	acpi_ns_check_parameter_count(pathname, node, predefined);
+
+	/*
+	 * If there is no return value, check if we require a return value for
+	 * this predefined name. Either one return value is expected, or none,
+	 * for both methods and other objects.
+	 *
+	 * Exit now if there is no return object. Warning if one was expected.
+	 */
+	if (!return_object) {
+		if ((predefined->info.expected_btypes) &&
+		    (!(predefined->info.expected_btypes & ACPI_RTYPE_NONE))) {
+			ACPI_ERROR((AE_INFO,
+				    "%s: Missing expected return value",
+				    pathname));
+
+			status = AE_AML_NO_RETURN_VALUE;
+		}
+		goto exit;
+	}
+
+	/*
+	 * We have a return value, but if one wasn't expected, just exit, this is
+	 * not a problem
+	 *
+	 * For example, if "Implicit return value" is enabled, methods will
+	 * always return a value
+	 */
+	if (!predefined->info.expected_btypes) {
+		goto exit;
+	}
+
+	/*
+	 * Check that the type of the return object is what is expected for
+	 * this predefined name
+	 */
+	status = acpi_ns_check_object_type(pathname, return_object,
+					   predefined->info.expected_btypes,
+					   ACPI_NOT_PACKAGE);
+	if (ACPI_FAILURE(status)) {
+		goto exit;
+	}
+
+	/* For returned Package objects, check the type of all sub-objects */
+
+	if (ACPI_GET_OBJECT_TYPE(return_object) == ACPI_TYPE_PACKAGE) {
+		status =
+		    acpi_ns_check_package(pathname, return_object, predefined);
+	}
+
+      exit:
+	if (pathname) {
+		ACPI_FREE(pathname);
+	}
+
+	return (status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ns_check_parameter_count
+ *
+ * PARAMETERS:  Pathname        - Full pathname to the node (for error msgs)
+ *              Node            - Namespace node for the method/object
+ *              Predefined      - Pointer to entry in predefined name table
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Check that the declared (in ASL/AML) parameter count for a
+ *              predefined name is what is expected (i.e., what is defined in
+ *              the ACPI specification for this predefined name.)
+ *
+ ******************************************************************************/
+
+void
+acpi_ns_check_parameter_count(char *pathname,
+			      struct acpi_namespace_node *node,
+			      const union acpi_predefined_info *predefined)
+{
+	u32 param_count;
+	u32 required_params_current;
+	u32 required_params_old;
+
+	/*
+	 * Check that the ASL-defined parameter count is what is expected for
+	 * this predefined name.
+	 *
+	 * Methods have 0-7 parameters. All other types have zero.
+	 */
+	param_count = 0;
+	if (node->type == ACPI_TYPE_METHOD) {
+		param_count = node->object->method.param_count;
+	}
+
+	/* Validate parameter count - allow two different legal counts (_SCP) */
+
+	required_params_current = predefined->info.param_count & 0x0F;
+	required_params_old = predefined->info.param_count >> 4;
+
+	if ((param_count != required_params_current) &&
+	    (param_count != required_params_old)) {
+		ACPI_WARNING((AE_INFO,
+			      "%s: Parameter count mismatch - ASL declared %d, expected %d",
+			      pathname, param_count, required_params_current));
+	}
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ns_check_for_predefined_name
+ *
+ * PARAMETERS:  Node            - Namespace node for the method/object
+ *
+ * RETURN:      Pointer to entry in predefined table. NULL indicates not found.
+ *
+ * DESCRIPTION: Check an object name against the predefined object list.
+ *
+ ******************************************************************************/
+
+const union acpi_predefined_info *acpi_ns_check_for_predefined_name(struct
+								    acpi_namespace_node
+								    *node)
+{
+	const union acpi_predefined_info *this_name;
+
+	/* Quick check for a predefined name, first character must be underscore */
+
+	if (node->name.ascii[0] != '_') {
+		return (NULL);
+	}
+
+	/* Search info table for a predefined method/object name */
+
+	this_name = predefined_names;
+	while (this_name->info.name[0]) {
+		if (ACPI_COMPARE_NAME(node->name.ascii, this_name->info.name)) {
+
+			/* Return pointer to this table entry */
+
+			return (this_name);
+		}
+
+		/*
+		 * Skip next entry in the table if this name returns a Package
+		 * (next entry contains the package info)
+		 */
+		if (this_name->info.expected_btypes & ACPI_RTYPE_PACKAGE) {
+			this_name++;
+		}
+
+		this_name++;
+	}
+
+	return (NULL);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ns_check_package
+ *
+ * PARAMETERS:  Pathname        - Full pathname to the node (for error msgs)
+ *              return_object   - Object returned from the evaluation of a
+ *                                method or object
+ *              Predefined      - Pointer to entry in predefined name table
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Check a returned package object for the correct count and
+ *              correct type of all sub-objects.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ns_check_package(char *pathname,
+		      union acpi_operand_object *return_object,
+		      const union acpi_predefined_info *predefined)
+{
+	const union acpi_predefined_info *package;
+	union acpi_operand_object *sub_package;
+	union acpi_operand_object **elements;
+	union acpi_operand_object **sub_elements;
+	acpi_status status;
+	u32 expected_count;
+	u32 count;
+	u32 i;
+	u32 j;
+
+	ACPI_FUNCTION_NAME(ns_check_package);
+
+	/* The package info for this name is in the next table entry */
+
+	package = predefined + 1;
+
+	ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
+			  "%s Validating return Package of Type %X, Count %X\n",
+			  pathname, package->ret_info.type,
+			  return_object->package.count));
+
+	/* Extract package count and elements array */
+
+	elements = return_object->package.elements;
+	count = return_object->package.count;
+
+	/* The package must have at least one element, else invalid */
+
+	if (!count) {
+		ACPI_WARNING((AE_INFO,
+			      "%s: Return Package has no elements (empty)",
+			      pathname));
+
+		return (AE_AML_OPERAND_VALUE);
+	}
+
+	/*
+	 * Decode the type of the expected package contents
+	 *
+	 * PTYPE1 packages contain no subpackages
+	 * PTYPE2 packages contain sub-packages
+	 */
+	switch (package->ret_info.type) {
+	case ACPI_PTYPE1_FIXED:
+
+		/*
+		 * The package count is fixed and there are no sub-packages
+		 *
+		 * If package is too small, exit.
+		 * If package is larger than expected, issue warning but continue
+		 */
+		expected_count =
+		    package->ret_info.count1 + package->ret_info.count2;
+		if (count < expected_count) {
+			goto package_too_small;
+		} else if (count > expected_count) {
+			ACPI_WARNING((AE_INFO,
+				      "%s: Return Package is larger than needed - "
+				      "found %u, expected %u", pathname, count,
+				      expected_count));
+		}
+
+		/* Validate all elements of the returned package */
+
+		status = acpi_ns_check_package_elements(pathname, elements,
+							package->ret_info.
+							object_type1,
+							package->ret_info.
+							count1,
+							package->ret_info.
+							object_type2,
+							package->ret_info.
+							count2);
+		if (ACPI_FAILURE(status)) {
+			return (status);
+		}
+		break;
+
+	case ACPI_PTYPE1_VAR:
+
+		/*
+		 * The package count is variable, there are no sub-packages, and all
+		 * elements must be of the same type
+		 */
+		for (i = 0; i < count; i++) {
+			status = acpi_ns_check_object_type(pathname, *elements,
+							   package->ret_info.
+							   object_type1, i);
+			if (ACPI_FAILURE(status)) {
+				return (status);
+			}
+			elements++;
+		}
+		break;
+
+	case ACPI_PTYPE1_OPTION:
+
+		/*
+		 * The package count is variable, there are no sub-packages. There are
+		 * a fixed number of required elements, and a variable number of
+		 * optional elements.
+		 *
+		 * Check if package is at least as large as the minimum required
+		 */
+		expected_count = package->ret_info3.count;
+		if (count < expected_count) {
+			goto package_too_small;
+		}
+
+		/* Variable number of sub-objects */
+
+		for (i = 0; i < count; i++) {
+			if (i < package->ret_info3.count) {
+
+				/* These are the required package elements (0, 1, or 2) */
+
+				status =
+				    acpi_ns_check_object_type(pathname,
+							      *elements,
+							      package->
+							      ret_info3.
+							      object_type[i],
+							      i);
+				if (ACPI_FAILURE(status)) {
+					return (status);
+				}
+			} else {
+				/* These are the optional package elements */
+
+				status =
+				    acpi_ns_check_object_type(pathname,
+							      *elements,
+							      package->
+							      ret_info3.
+							      tail_object_type,
+							      i);
+				if (ACPI_FAILURE(status)) {
+					return (status);
+				}
+			}
+			elements++;
+		}
+		break;
+
+	case ACPI_PTYPE2_PKG_COUNT:
+
+		/* First element is the (Integer) count of sub-packages to follow */
+
+		status = acpi_ns_check_object_type(pathname, *elements,
+						   ACPI_RTYPE_INTEGER, 0);
+		if (ACPI_FAILURE(status)) {
+			return (status);
+		}
+
+		/*
+		 * Count cannot be larger than the parent package length, but allow it
+		 * to be smaller. The >= accounts for the Integer above.
+		 */
+		expected_count = (u32) (*elements)->integer.value;
+		if (expected_count >= count) {
+			goto package_too_small;
+		}
+
+		count = expected_count;
+		elements++;
+
+		/* Now we can walk the sub-packages */
+
+		/*lint -fallthrough */
+
+	case ACPI_PTYPE2:
+	case ACPI_PTYPE2_FIXED:
+	case ACPI_PTYPE2_MIN:
+	case ACPI_PTYPE2_COUNT:
+
+		/*
+		 * These types all return a single package that consists of a variable
+		 * number of sub-packages
+		 */
+		for (i = 0; i < count; i++) {
+			sub_package = *elements;
+			sub_elements = sub_package->package.elements;
+
+			/* Each sub-object must be of type Package */
+
+			status =
+			    acpi_ns_check_object_type(pathname, sub_package,
+						      ACPI_RTYPE_PACKAGE, i);
+			if (ACPI_FAILURE(status)) {
+				return (status);
+			}
+
+			/* Examine the different types of sub-packages */
+
+			switch (package->ret_info.type) {
+			case ACPI_PTYPE2:
+			case ACPI_PTYPE2_PKG_COUNT:
+
+				/* Each subpackage has a fixed number of elements */
+
+				expected_count =
+				    package->ret_info.count1 +
+				    package->ret_info.count2;
+				if (sub_package->package.count !=
+				    expected_count) {
+					count = sub_package->package.count;
+					goto package_too_small;
+				}
+
+				status =
+				    acpi_ns_check_package_elements(pathname,
+								   sub_elements,
+								   package->
+								   ret_info.
+								   object_type1,
+								   package->
+								   ret_info.
+								   count1,
+								   package->
+								   ret_info.
+								   object_type2,
+								   package->
+								   ret_info.
+								   count2);
+				if (ACPI_FAILURE(status)) {
+					return (status);
+				}
+				break;
+
+			case ACPI_PTYPE2_FIXED:
+
+				/* Each sub-package has a fixed length */
+
+				expected_count = package->ret_info2.count;
+				if (sub_package->package.count < expected_count) {
+					count = sub_package->package.count;
+					goto package_too_small;
+				}
+
+				/* Check the type of each sub-package element */
+
+				for (j = 0; j < expected_count; j++) {
+					status =
+					    acpi_ns_check_object_type(pathname,
+								      sub_elements
+								      [j],
+								      package->
+								      ret_info2.
+								      object_type
+								      [j], j);
+					if (ACPI_FAILURE(status)) {
+						return (status);
+					}
+				}
+				break;
+
+			case ACPI_PTYPE2_MIN:
+
+				/* Each sub-package has a variable but minimum length */
+
+				expected_count = package->ret_info.count1;
+				if (sub_package->package.count < expected_count) {
+					count = sub_package->package.count;
+					goto package_too_small;
+				}
+
+				/* Check the type of each sub-package element */
+
+				status =
+				    acpi_ns_check_package_elements(pathname,
+								   sub_elements,
+								   package->
+								   ret_info.
+								   object_type1,
+								   sub_package->
+								   package.
+								   count, 0, 0);
+				if (ACPI_FAILURE(status)) {
+					return (status);
+				}
+				break;
+
+			case ACPI_PTYPE2_COUNT:
+
+				/* First element is the (Integer) count of elements to follow */
+
+				status =
+				    acpi_ns_check_object_type(pathname,
+							      *sub_elements,
+							      ACPI_RTYPE_INTEGER,
+							      0);
+				if (ACPI_FAILURE(status)) {
+					return (status);
+				}
+
+				/* Make sure package is large enough for the Count */
+
+				expected_count =
+				    (u32) (*sub_elements)->integer.value;
+				if (sub_package->package.count < expected_count) {
+					count = sub_package->package.count;
+					goto package_too_small;
+				}
+
+				/* Check the type of each sub-package element */
+
+				status =
+				    acpi_ns_check_package_elements(pathname,
+								   (sub_elements
+								    + 1),
+								   package->
+								   ret_info.
+								   object_type1,
+								   (expected_count
+								    - 1), 0, 0);
+				if (ACPI_FAILURE(status)) {
+					return (status);
+				}
+				break;
+
+			default:
+				break;
+			}
+
+			elements++;
+		}
+		break;
+
+	default:
+
+		/* Should not get here if predefined info table is correct */
+
+		ACPI_WARNING((AE_INFO,
+			      "%s: Invalid internal return type in table entry: %X",
+			      pathname, package->ret_info.type));
+
+		return (AE_AML_INTERNAL);
+	}
+
+	return (AE_OK);
+
+      package_too_small:
+
+	/* Error exit for the case with an incorrect package count */
+
+	ACPI_WARNING((AE_INFO, "%s: Return Package is too small - "
+		      "found %u, expected %u", pathname, count,
+		      expected_count));
+
+	return (AE_AML_OPERAND_VALUE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ns_check_package_elements
+ *
+ * PARAMETERS:  Pathname        - Full pathname to the node (for error msgs)
+ *              Elements        - Pointer to the package elements array
+ *              Type1           - Object type for first group
+ *              Count1          - Count for first group
+ *              Type2           - Object type for second group
+ *              Count2          - Count for second group
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Check that all elements of a package are of the correct object
+ *              type. Supports up to two groups of different object types.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ns_check_package_elements(char *pathname,
+			       union acpi_operand_object **elements,
+			       u8 type1, u32 count1, u8 type2, u32 count2)
+{
+	union acpi_operand_object **this_element = elements;
+	acpi_status status;
+	u32 i;
+
+	/*
+	 * Up to two groups of package elements are supported by the data
+	 * structure. All elements in each group must be of the same type.
+	 * The second group can have a count of zero.
+	 */
+	for (i = 0; i < count1; i++) {
+		status = acpi_ns_check_object_type(pathname, *this_element,
+						   type1, i);
+		if (ACPI_FAILURE(status)) {
+			return (status);
+		}
+		this_element++;
+	}
+
+	for (i = 0; i < count2; i++) {
+		status = acpi_ns_check_object_type(pathname, *this_element,
+						   type2, (i + count1));
+		if (ACPI_FAILURE(status)) {
+			return (status);
+		}
+		this_element++;
+	}
+
+	return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ns_check_object_type
+ *
+ * PARAMETERS:  Pathname        - Full pathname to the node (for error msgs)
+ *              return_object   - Object return from the execution of this
+ *                                method/object
+ *              expected_btypes - Bitmap of expected return type(s)
+ *              package_index   - Index of object within parent package (if
+ *                                applicable - ACPI_NOT_PACKAGE otherwise)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Check the type of the return object against the expected object
+ *              type(s). Use of Btype allows multiple expected object types.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ns_check_object_type(char *pathname,
+			  union acpi_operand_object *return_object,
+			  u32 expected_btypes, u32 package_index)
+{
+	acpi_status status = AE_OK;
+	u32 return_btype;
+	char type_buffer[48];	/* Room for 5 types */
+	u32 this_rtype;
+	u32 i;
+	u32 j;
+
+	/*
+	 * If we get a NULL return_object here, it is a NULL package element,
+	 * and this is always an error.
+	 */
+	if (!return_object) {
+		goto type_error_exit;
+	}
+
+	/* A Namespace node should not get here, but make sure */
+
+	if (ACPI_GET_DESCRIPTOR_TYPE(return_object) == ACPI_DESC_TYPE_NAMED) {
+		ACPI_WARNING((AE_INFO,
+			      "%s: Invalid return type - Found a Namespace node [%4.4s] type %s",
+			      pathname, return_object->node.name.ascii,
+			      acpi_ut_get_type_name(return_object->node.type)));
+		return (AE_AML_OPERAND_TYPE);
+	}
+
+	/*
+	 * Convert the object type (ACPI_TYPE_xxx) to a bitmapped object type.
+	 * The bitmapped type allows multiple possible return types.
+	 *
+	 * Note, the cases below must handle all of the possible types returned
+	 * from all of the predefined names (including elements of returned
+	 * packages)
+	 */
+	switch (ACPI_GET_OBJECT_TYPE(return_object)) {
+	case ACPI_TYPE_INTEGER:
+		return_btype = ACPI_RTYPE_INTEGER;
+		break;
+
+	case ACPI_TYPE_BUFFER:
+		return_btype = ACPI_RTYPE_BUFFER;
+		break;
+
+	case ACPI_TYPE_STRING:
+		return_btype = ACPI_RTYPE_STRING;
+		break;
+
+	case ACPI_TYPE_PACKAGE:
+		return_btype = ACPI_RTYPE_PACKAGE;
+		break;
+
+	case ACPI_TYPE_LOCAL_REFERENCE:
+		return_btype = ACPI_RTYPE_REFERENCE;
+		break;
+
+	default:
+		/* Not one of the supported objects, must be incorrect */
+
+		goto type_error_exit;
+	}
+
+	/* Is the object one of the expected types? */
+
+	if (!(return_btype & expected_btypes)) {
+		goto type_error_exit;
+	}
+
+	/* For reference objects, check that the reference type is correct */
+
+	if (ACPI_GET_OBJECT_TYPE(return_object) == ACPI_TYPE_LOCAL_REFERENCE) {
+		status = acpi_ns_check_reference(pathname, return_object);
+	}
+
+	return (status);
+
+      type_error_exit:
+
+	/* Create a string with all expected types for this predefined object */
+
+	j = 1;
+	type_buffer[0] = 0;
+	this_rtype = ACPI_RTYPE_INTEGER;
+
+	for (i = 0; i < ACPI_NUM_RTYPES; i++) {
+
+		/* If one of the expected types, concatenate the name of this type */
+
+		if (expected_btypes & this_rtype) {
+			ACPI_STRCAT(type_buffer, &acpi_rtype_names[i][j]);
+			j = 0;	/* Use name separator from now on */
+		}
+		this_rtype <<= 1;	/* Next Rtype */
+	}
+
+	if (package_index == ACPI_NOT_PACKAGE) {
+		ACPI_WARNING((AE_INFO,
+			      "%s: Return type mismatch - found %s, expected %s",
+			      pathname,
+			      acpi_ut_get_object_type_name(return_object),
+			      type_buffer));
+	} else {
+		ACPI_WARNING((AE_INFO,
+			      "%s: Return Package type mismatch at index %u - "
+			      "found %s, expected %s", pathname, package_index,
+			      acpi_ut_get_object_type_name(return_object),
+			      type_buffer));
+	}
+
+	return (AE_AML_OPERAND_TYPE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ns_check_reference
+ *
+ * PARAMETERS:  Pathname        - Full pathname to the node (for error msgs)
+ *              return_object   - Object returned from the evaluation of a
+ *                                method or object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Check a returned reference object for the correct reference
+ *              type. The only reference type that can be returned from a
+ *              predefined method is a named reference. All others are invalid.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ns_check_reference(char *pathname,
+			union acpi_operand_object *return_object)
+{
+
+	/*
+	 * Check the reference object for the correct reference type (opcode).
+	 * The only type of reference that can be converted to an union acpi_object is
+	 * a reference to a named object (reference class: NAME)
+	 */
+	if (return_object->reference.class == ACPI_REFCLASS_NAME) {
+		return (AE_OK);
+	}
+
+	ACPI_WARNING((AE_INFO,
+		      "%s: Return type mismatch - unexpected reference object type [%s] %2.2X",
+		      pathname, acpi_ut_get_reference_name(return_object),
+		      return_object->reference.class));
+
+	return (AE_AML_OPERAND_TYPE);
+}
diff --git a/drivers/acpi/namespace/nssearch.c b/drivers/acpi/namespace/nssearch.c
index 8399276..a9a80bf 100644
--- a/drivers/acpi/namespace/nssearch.c
+++ b/drivers/acpi/namespace/nssearch.c
@@ -331,7 +331,7 @@
 				      "Found bad character(s) in name, repaired: [%4.4s]\n",
 				      ACPI_CAST_PTR(char, &target_name)));
 		} else {
-			ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 					  "Found bad character(s) in name, repaired: [%4.4s]\n",
 					  ACPI_CAST_PTR(char, &target_name)));
 		}
diff --git a/drivers/acpi/namespace/nsxfeval.c b/drivers/acpi/namespace/nsxfeval.c
index 38be586..a085cc3 100644
--- a/drivers/acpi/namespace/nsxfeval.c
+++ b/drivers/acpi/namespace/nsxfeval.c
@@ -48,6 +48,10 @@
 
 #define _COMPONENT          ACPI_NAMESPACE
 ACPI_MODULE_NAME("nsxfeval")
+
+/* Local prototypes */
+static void acpi_ns_resolve_references(struct acpi_evaluate_info *info);
+
 #ifdef ACPI_FUTURE_USAGE
 /*******************************************************************************
  *
@@ -69,6 +73,7 @@
  *              be valid (non-null)
  *
  ******************************************************************************/
+
 acpi_status
 acpi_evaluate_object_typed(acpi_handle handle,
 			   acpi_string pathname,
@@ -283,6 +288,10 @@
 
 			if (ACPI_SUCCESS(status)) {
 
+				/* Dereference Index and ref_of references */
+
+				acpi_ns_resolve_references(info);
+
 				/* Get the size of the returned object */
 
 				status =
@@ -352,6 +361,74 @@
 
 /*******************************************************************************
  *
+ * FUNCTION:    acpi_ns_resolve_references
+ *
+ * PARAMETERS:  Info                    - Evaluation info block
+ *
+ * RETURN:      Info->return_object is replaced with the dereferenced object
+ *
+ * DESCRIPTION: Dereference certain reference objects. Called before an
+ *              internal return object is converted to an external union acpi_object.
+ *
+ * Performs an automatic dereference of Index and ref_of reference objects.
+ * These reference objects are not supported by the union acpi_object, so this is a
+ * last resort effort to return something useful. Also, provides compatibility
+ * with other ACPI implementations.
+ *
+ * NOTE: does not handle references within returned package objects or nested
+ * references, but this support could be added later if found to be necessary.
+ *
+ ******************************************************************************/
+static void acpi_ns_resolve_references(struct acpi_evaluate_info *info)
+{
+	union acpi_operand_object *obj_desc = NULL;
+	struct acpi_namespace_node *node;
+
+	/* We are interested in reference objects only */
+
+	if (ACPI_GET_OBJECT_TYPE(info->return_object) !=
+	    ACPI_TYPE_LOCAL_REFERENCE) {
+		return;
+	}
+
+	/*
+	 * Two types of references are supported - those created by Index and
+	 * ref_of operators. A name reference (AML_NAMEPATH_OP) can be converted
+	 * to an union acpi_object, so it is not dereferenced here. A ddb_handle
+	 * (AML_LOAD_OP) cannot be dereferenced, nor can it be converted to
+	 * an union acpi_object.
+	 */
+	switch (info->return_object->reference.class) {
+	case ACPI_REFCLASS_INDEX:
+
+		obj_desc = *(info->return_object->reference.where);
+		break;
+
+	case ACPI_REFCLASS_REFOF:
+
+		node = info->return_object->reference.object;
+		if (node) {
+			obj_desc = node->object;
+		}
+		break;
+
+	default:
+		return;
+	}
+
+	/* Replace the existing reference object */
+
+	if (obj_desc) {
+		acpi_ut_add_reference(obj_desc);
+		acpi_ut_remove_reference(info->return_object);
+		info->return_object = obj_desc;
+	}
+
+	return;
+}
+
+/*******************************************************************************
+ *
  * FUNCTION:    acpi_walk_namespace
  *
  * PARAMETERS:  Type                - acpi_object_type to search for
@@ -379,6 +456,7 @@
  *              function, etc.
  *
  ******************************************************************************/
+
 acpi_status
 acpi_walk_namespace(acpi_object_type type,
 		    acpi_handle start_object,
diff --git a/drivers/acpi/namespace/nsxfname.c b/drivers/acpi/namespace/nsxfname.c
index a287ed5..5efa4e7 100644
--- a/drivers/acpi/namespace/nsxfname.c
+++ b/drivers/acpi/namespace/nsxfname.c
@@ -253,6 +253,7 @@
 	node = acpi_ns_map_handle_to_node(handle);
 	if (!node) {
 		(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+		status = AE_BAD_PARAMETER;
 		goto cleanup;
 	}
 
@@ -264,6 +265,10 @@
 	info->name = node->name.integer;
 	info->valid = 0;
 
+	if (node->type == ACPI_TYPE_METHOD) {
+		info->param_count = node->object->method.param_count;
+	}
+
 	status = acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 	if (ACPI_FAILURE(status)) {
 		goto cleanup;
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index cb9864e..25ceae91 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -258,7 +258,7 @@
 
 int acpi_get_pxm(acpi_handle h)
 {
-	unsigned long pxm;
+	unsigned long long pxm;
 	acpi_status status;
 	acpi_handle handle;
 	acpi_handle phandle = h;
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 235a138..4be2521 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -608,7 +608,7 @@
 	acpi_handle handle;
 	struct acpi_pci_id *pci_id = *id;
 	acpi_status status;
-	unsigned long temp;
+	unsigned long long temp;
 	acpi_object_type type;
 
 	acpi_get_parent(chandle, &handle);
@@ -620,8 +620,7 @@
 		if ((ACPI_FAILURE(status)) || (type != ACPI_TYPE_DEVICE))
 			return;
 
-		status =
-		    acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL,
+		status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL,
 					  &temp);
 		if (ACPI_SUCCESS(status)) {
 			u32 val;
@@ -682,6 +681,22 @@
 	return;
 }
 
+static void acpi_os_execute_hp_deferred(struct work_struct *work)
+{
+	struct acpi_os_dpc *dpc = container_of(work, struct acpi_os_dpc, work);
+	if (!dpc) {
+		printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
+		return;
+	}
+
+	acpi_os_wait_events_complete(NULL);
+
+	dpc->function(dpc->context);
+	kfree(dpc);
+
+	return;
+}
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_os_execute
@@ -697,12 +712,13 @@
  *
  ******************************************************************************/
 
-acpi_status acpi_os_execute(acpi_execute_type type,
-			    acpi_osd_exec_callback function, void *context)
+static acpi_status __acpi_os_execute(acpi_execute_type type,
+	acpi_osd_exec_callback function, void *context, int hp)
 {
 	acpi_status status = AE_OK;
 	struct acpi_os_dpc *dpc;
 	struct workqueue_struct *queue;
+	int ret;
 	ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 			  "Scheduling function [%p(%p)] for deferred execution.\n",
 			  function, context));
@@ -726,19 +742,38 @@
 	dpc->function = function;
 	dpc->context = context;
 
-	INIT_WORK(&dpc->work, acpi_os_execute_deferred);
-	queue = (type == OSL_NOTIFY_HANDLER) ? kacpi_notify_wq : kacpid_wq;
-	if (!queue_work(queue, &dpc->work)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-			  "Call to queue_work() failed.\n"));
+	if (!hp) {
+		INIT_WORK(&dpc->work, acpi_os_execute_deferred);
+		queue = (type == OSL_NOTIFY_HANDLER) ?
+			kacpi_notify_wq : kacpid_wq;
+		ret = queue_work(queue, &dpc->work);
+	} else {
+		INIT_WORK(&dpc->work, acpi_os_execute_hp_deferred);
+		ret = schedule_work(&dpc->work);
+	}
+
+	if (!ret) {
+		printk(KERN_ERR PREFIX
+			  "Call to queue_work() failed.\n");
 		status = AE_ERROR;
 		kfree(dpc);
 	}
 	return_ACPI_STATUS(status);
 }
 
+acpi_status acpi_os_execute(acpi_execute_type type,
+			    acpi_osd_exec_callback function, void *context)
+{
+	return __acpi_os_execute(type, function, context, 0);
+}
 EXPORT_SYMBOL(acpi_os_execute);
 
+acpi_status acpi_os_hotplug_execute(acpi_osd_exec_callback function,
+	void *context)
+{
+	return __acpi_os_execute(0, function, context, 1);
+}
+
 void acpi_os_wait_events_complete(void *context)
 {
 	flush_workqueue(kacpid_wq);
diff --git a/drivers/acpi/parser/psloop.c b/drivers/acpi/parser/psloop.c
index c06238e..4647039 100644
--- a/drivers/acpi/parser/psloop.c
+++ b/drivers/acpi/parser/psloop.c
@@ -719,6 +719,8 @@
 		*op = NULL;
 	}
 
+	ACPI_PREEMPTION_POINT();
+
 	return_ACPI_STATUS(AE_OK);
 }
 
diff --git a/drivers/acpi/parser/psparse.c b/drivers/acpi/parser/psparse.c
index 15e1702..68e932f 100644
--- a/drivers/acpi/parser/psparse.c
+++ b/drivers/acpi/parser/psparse.c
@@ -137,6 +137,7 @@
 	union acpi_parse_object *next;
 	const struct acpi_opcode_info *parent_info;
 	union acpi_parse_object *replacement_op = NULL;
+	acpi_status status = AE_OK;
 
 	ACPI_FUNCTION_TRACE_PTR(ps_complete_this_op, op);
 
@@ -186,7 +187,7 @@
 			replacement_op =
 			    acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP);
 			if (!replacement_op) {
-				goto allocate_error;
+				status = AE_NO_MEMORY;
 			}
 			break;
 
@@ -211,7 +212,7 @@
 				replacement_op =
 				    acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP);
 				if (!replacement_op) {
-					goto allocate_error;
+					status = AE_NO_MEMORY;
 				}
 			} else
 			    if ((op->common.parent->common.aml_opcode ==
@@ -226,13 +227,13 @@
 					    acpi_ps_alloc_op(op->common.
 							     aml_opcode);
 					if (!replacement_op) {
-						goto allocate_error;
+						status = AE_NO_MEMORY;
+					} else {
+						replacement_op->named.data =
+						    op->named.data;
+						replacement_op->named.length =
+						    op->named.length;
 					}
-
-					replacement_op->named.data =
-					    op->named.data;
-					replacement_op->named.length =
-					    op->named.length;
 				}
 			}
 			break;
@@ -242,7 +243,7 @@
 			replacement_op =
 			    acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP);
 			if (!replacement_op) {
-				goto allocate_error;
+				status = AE_NO_MEMORY;
 			}
 		}
 
@@ -302,14 +303,7 @@
 	/* Now we can actually delete the subtree rooted at Op */
 
 	acpi_ps_delete_parse_tree(op);
-	return_ACPI_STATUS(AE_OK);
-
-      allocate_error:
-
-	/* Always delete the subtree, even on error */
-
-	acpi_ps_delete_parse_tree(op);
-	return_ACPI_STATUS(AE_NO_MEMORY);
+	return_ACPI_STATUS(status);
 }
 
 /*******************************************************************************
@@ -641,10 +635,12 @@
 					    ACPI_WALK_METHOD_RESTART;
 				}
 			} else {
-				/* On error, delete any return object */
+				/* On error, delete any return object or implicit return */
 
 				acpi_ut_remove_reference(previous_walk_state->
 							 return_desc);
+				acpi_ds_clear_implicit_return
+				    (previous_walk_state);
 			}
 		}
 
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index cf47805..fcfdef7 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -709,7 +709,7 @@
 			  acpi_device_bid(link->device)));
 
 	if (link->refcnt == 0) {
-		acpi_ut_evaluate_object(link->device->handle, "_DIS", 0, NULL);
+		acpi_evaluate_object(link->device->handle, "_DIS", NULL, NULL);
 	}
 	mutex_unlock(&acpi_link_lock);
 	return (link->irq.active);
@@ -737,7 +737,7 @@
 	link->device = device;
 	strcpy(acpi_device_name(device), ACPI_PCI_LINK_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_PCI_LINK_CLASS);
-	acpi_driver_data(device) = link;
+	device->driver_data = link;
 
 	mutex_lock(&acpi_link_lock);
 	result = acpi_pci_link_get_possible(link);
@@ -773,7 +773,7 @@
 
       end:
 	/* disable all links -- to be activated on use */
-	acpi_ut_evaluate_object(device->handle, "_DIS", 0, NULL);
+	acpi_evaluate_object(device->handle, "_DIS", NULL, NULL);
 	mutex_unlock(&acpi_link_lock);
 
 	if (result)
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index c3fed31..1b8f67d2 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -190,7 +190,7 @@
 	struct acpi_pci_root *root = NULL;
 	struct acpi_pci_root *tmp;
 	acpi_status status = AE_OK;
-	unsigned long value = 0;
+	unsigned long long value = 0;
 	acpi_handle handle = NULL;
 	struct acpi_device *child;
 
@@ -206,7 +206,7 @@
 	root->device = device;
 	strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
-	acpi_driver_data(device) = root;
+	device->driver_data = root;
 
 	device->ops.bind = acpi_pci_bind;
 
diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c
index d5b4ef8..cd1f446 100644
--- a/drivers/acpi/pci_slot.c
+++ b/drivers/acpi/pci_slot.c
@@ -76,10 +76,10 @@
 };
 
 static int
-check_slot(acpi_handle handle, unsigned long *sun)
+check_slot(acpi_handle handle, unsigned long long *sun)
 {
 	int device = -1;
-	unsigned long adr, sta;
+	unsigned long long adr, sta;
 	acpi_status status;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 
@@ -132,7 +132,7 @@
 register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
 	int device;
-	unsigned long sun;
+	unsigned long long sun;
 	char name[SLOT_NAME_SIZE];
 	struct acpi_pci_slot *slot;
 	struct pci_slot *pci_slot;
@@ -150,7 +150,7 @@
 	}
 
 	snprintf(name, sizeof(name), "%u", (u32)sun);
-	pci_slot = pci_create_slot(pci_bus, device, name);
+	pci_slot = pci_create_slot(pci_bus, device, name, NULL);
 	if (IS_ERR(pci_slot)) {
 		err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot));
 		kfree(slot);
@@ -182,7 +182,7 @@
 walk_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
 	int device, function;
-	unsigned long adr;
+	unsigned long long adr;
 	acpi_status status;
 	acpi_handle dummy_handle;
 	acpi_walk_callback user_function;
@@ -239,7 +239,7 @@
 walk_root_bridge(acpi_handle handle, acpi_walk_callback user_function)
 {
 	int seg, bus;
-	unsigned long tmp;
+	unsigned long long tmp;
 	acpi_status status;
 	acpi_handle dummy_handle;
 	struct pci_bus *pci_bus;
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 4ab21cb..a1718e5 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -54,6 +54,14 @@
 #define ACPI_POWER_RESOURCE_STATE_OFF	0x00
 #define ACPI_POWER_RESOURCE_STATE_ON	0x01
 #define ACPI_POWER_RESOURCE_STATE_UNKNOWN 0xFF
+
+#ifdef MODULE_PARAM_PREFIX
+#undef MODULE_PARAM_PREFIX
+#endif
+#define MODULE_PARAM_PREFIX "acpi."
+int acpi_power_nocheck;
+module_param_named(power_nocheck, acpi_power_nocheck, bool, 000);
+
 static int acpi_power_add(struct acpi_device *device);
 static int acpi_power_remove(struct acpi_device *device, int type);
 static int acpi_power_resume(struct acpi_device *device);
@@ -128,16 +136,16 @@
 	return 0;
 }
 
-static int acpi_power_get_state(struct acpi_power_resource *resource, int *state)
+static int acpi_power_get_state(acpi_handle handle, int *state)
 {
 	acpi_status status = AE_OK;
-	unsigned long sta = 0;
+	unsigned long long sta = 0;
 
 
-	if (!resource || !state)
+	if (!handle || !state)
 		return -EINVAL;
 
-	status = acpi_evaluate_integer(resource->device->handle, "_STA", NULL, &sta);
+	status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
@@ -145,7 +153,7 @@
 			      ACPI_POWER_RESOURCE_STATE_OFF;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] is %s\n",
-			  resource->name, state ? "on" : "off"));
+			  acpi_ut_get_node_name(handle), state ? "on" : "off"));
 
 	return 0;
 }
@@ -153,7 +161,6 @@
 static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state)
 {
 	int result = 0, state1;
-	struct acpi_power_resource *resource = NULL;
 	u32 i = 0;
 
 
@@ -161,12 +168,15 @@
 		return -EINVAL;
 
 	/* The state of the list is 'on' IFF all resources are 'on'. */
+	/* */
 
 	for (i = 0; i < list->count; i++) {
-		result = acpi_power_get_context(list->handles[i], &resource);
-		if (result)
-			return result;
-		result = acpi_power_get_state(resource, &state1);
+		/*
+		 * The state of the power resource can be obtained by
+		 * using the ACPI handle. In such case it is unnecessary to
+		 * get the Power resource first and then get its state again.
+		 */
+		result = acpi_power_get_state(list->handles[i], &state1);
 		if (result)
 			return result;
 
@@ -226,12 +236,18 @@
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
-	result = acpi_power_get_state(resource, &state);
-	if (result)
-		return result;
-	if (state != ACPI_POWER_RESOURCE_STATE_ON)
-		return -ENOEXEC;
-
+	if (!acpi_power_nocheck) {
+		/*
+		 * If acpi_power_nocheck is set, it is unnecessary to check
+		 * the power state after power transition.
+		 */
+		result = acpi_power_get_state(resource->device->handle,
+				&state);
+		if (result)
+			return result;
+		if (state != ACPI_POWER_RESOURCE_STATE_ON)
+			return -ENOEXEC;
+	}
 	/* Update the power resource's _device_ power state */
 	resource->device->power.state = ACPI_STATE_D0;
 
@@ -277,11 +293,17 @@
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
-	result = acpi_power_get_state(resource, &state);
-	if (result)
-		return result;
-	if (state != ACPI_POWER_RESOURCE_STATE_OFF)
-		return -ENOEXEC;
+	if (!acpi_power_nocheck) {
+		/*
+		 * If acpi_power_nocheck is set, it is unnecessary to check
+		 * the power state after power transition.
+		 */
+		result = acpi_power_get_state(handle, &state);
+		if (result)
+			return result;
+		if (state != ACPI_POWER_RESOURCE_STATE_OFF)
+			return -ENOEXEC;
+	}
 
 	/* Update the power resource's _device_ power state */
 	resource->device->power.state = ACPI_STATE_D3;
@@ -555,7 +577,7 @@
 	if (!resource)
 		goto end;
 
-	result = acpi_power_get_state(resource, &state);
+	result = acpi_power_get_state(resource->device->handle, &state);
 	if (result)
 		goto end;
 
@@ -657,7 +679,7 @@
 	strcpy(resource->name, device->pnp.bus_id);
 	strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_POWER_CLASS);
-	acpi_driver_data(device) = resource;
+	device->driver_data = resource;
 
 	/* Evalute the object to get the system level and resource order. */
 	status = acpi_evaluate_object(device->handle, NULL, NULL, &buffer);
@@ -668,7 +690,7 @@
 	resource->system_level = acpi_object.power_resource.system_level;
 	resource->order = acpi_object.power_resource.resource_order;
 
-	result = acpi_power_get_state(resource, &state);
+	result = acpi_power_get_state(device->handle, &state);
 	if (result)
 		goto end;
 
@@ -733,9 +755,9 @@
 	if (!device || !acpi_driver_data(device))
 		return -EINVAL;
 
-	resource = (struct acpi_power_resource *)acpi_driver_data(device);
+	resource = acpi_driver_data(device);
 
-	result = acpi_power_get_state(resource, &state);
+	result = acpi_power_get_state(device->handle, &state);
 	if (result)
 		return result;
 
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index ee68ac5..24a362f 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -563,7 +563,7 @@
 
 	/* Check if it is a Device with HID and UID */
 	if (has_uid) {
-		unsigned long value;
+		unsigned long long value;
 		status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
 						NULL, &value);
 		if (ACPI_FAILURE(status)) {
@@ -818,7 +818,7 @@
 	pr->handle = device->handle;
 	strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS);
-	acpi_driver_data(device) = pr;
+	device->driver_data = pr;
 
 	return 0;
 }
@@ -875,7 +875,7 @@
 static int is_processor_present(acpi_handle handle)
 {
 	acpi_status status;
-	unsigned long sta = 0;
+	unsigned long long sta = 0;
 
 
 	status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index cf5b1b7..81b40ed 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1587,6 +1587,7 @@
 
 	if (acpi_idle_bm_check()) {
 		if (dev->safe_state) {
+			dev->last_state = dev->safe_state;
 			return dev->safe_state->enter(dev, dev->safe_state);
 		} else {
 			local_irq_disable();
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 80c251e..dbcf260 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -39,6 +39,10 @@
 #include <asm/uaccess.h>
 #endif
 
+#ifdef CONFIG_X86
+#include <asm/cpufeature.h>
+#endif
+
 #include <acpi/acpi_bus.h>
 #include <acpi/processor.h>
 
@@ -126,7 +130,7 @@
 static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 {
 	acpi_status status = 0;
-	unsigned long ppc = 0;
+	unsigned long long ppc = 0;
 
 
 	if (!pr)
@@ -334,7 +338,6 @@
 	acpi_status status = AE_OK;
 	acpi_handle handle = NULL;
 
-
 	if (!pr || !pr->performance || !pr->handle)
 		return -EINVAL;
 
@@ -347,13 +350,27 @@
 
 	result = acpi_processor_get_performance_control(pr);
 	if (result)
-		return result;
+		goto update_bios;
 
 	result = acpi_processor_get_performance_states(pr);
 	if (result)
-		return result;
+		goto update_bios;
 
 	return 0;
+
+	/*
+	 * Having _PPC but missing frequencies (_PSS, _PCT) is a very good hint that
+	 * the BIOS is older than the CPU and does not know its frequencies
+	 */
+ update_bios:
+#ifdef CONFIG_X86
+	if (ACPI_SUCCESS(acpi_get_handle(pr->handle, "_PPC", &handle))){
+		if(boot_cpu_has(X86_FEATURE_EST))
+			printk(KERN_WARNING FW_BUG "BIOS needs update for CPU "
+			       "frequency support\n");
+	}
+#endif
+	return result;
 }
 
 int acpi_processor_notify_smm(struct module *calling_module)
@@ -524,13 +541,13 @@
 
 	psd = buffer.pointer;
 	if (!psd || (psd->type != ACPI_TYPE_PACKAGE)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _PSD data\n"));
+		printk(KERN_ERR PREFIX "Invalid _PSD data\n");
 		result = -EFAULT;
 		goto end;
 	}
 
 	if (psd->package.count != 1) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _PSD data\n"));
+		printk(KERN_ERR PREFIX "Invalid _PSD data\n");
 		result = -EFAULT;
 		goto end;
 	}
@@ -543,19 +560,19 @@
 	status = acpi_extract_package(&(psd->package.elements[0]),
 		&format, &state);
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _PSD data\n"));
+		printk(KERN_ERR PREFIX "Invalid _PSD data\n");
 		result = -EFAULT;
 		goto end;
 	}
 
 	if (pdomain->num_entries != ACPI_PSD_REV0_ENTRIES) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unknown _PSD:num_entries\n"));
+		printk(KERN_ERR PREFIX "Unknown _PSD:num_entries\n");
 		result = -EFAULT;
 		goto end;
 	}
 
 	if (pdomain->revision != ACPI_PSD_REV0_REVISION) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unknown _PSD:revision\n"));
+		printk(KERN_ERR PREFIX "Unknown _PSD:revision\n");
 		result = -EFAULT;
 		goto end;
 	}
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index a56fc6c..3da2df9 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -274,7 +274,7 @@
 static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 {
 	acpi_status status = 0;
-	unsigned long tpc = 0;
+	unsigned long long tpc = 0;
 
 	if (!pr)
 		return -EINVAL;
@@ -528,13 +528,13 @@
 
 	tsd = buffer.pointer;
 	if (!tsd || (tsd->type != ACPI_TYPE_PACKAGE)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _TSD data\n"));
+		printk(KERN_ERR PREFIX "Invalid _TSD data\n");
 		result = -EFAULT;
 		goto end;
 	}
 
 	if (tsd->package.count != 1) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _TSD data\n"));
+		printk(KERN_ERR PREFIX "Invalid _TSD data\n");
 		result = -EFAULT;
 		goto end;
 	}
@@ -547,19 +547,19 @@
 	status = acpi_extract_package(&(tsd->package.elements[0]),
 				      &format, &state);
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _TSD data\n"));
+		printk(KERN_ERR PREFIX "Invalid _TSD data\n");
 		result = -EFAULT;
 		goto end;
 	}
 
 	if (pdomain->num_entries != ACPI_TSD_REV0_ENTRIES) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unknown _TSD:num_entries\n"));
+		printk(KERN_ERR PREFIX "Unknown _TSD:num_entries\n");
 		result = -EFAULT;
 		goto end;
 	}
 
 	if (pdomain->revision != ACPI_TSD_REV0_REVISION) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unknown _TSD:revision\n"));
+		printk(KERN_ERR PREFIX "Unknown _TSD:revision\n");
 		result = -EFAULT;
 		goto end;
 	}
diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c
index a6b662c..755baf2 100644
--- a/drivers/acpi/reboot.c
+++ b/drivers/acpi/reboot.c
@@ -15,9 +15,28 @@
 
 	rr = &acpi_gbl_FADT.reset_register;
 
-	/* Is the reset register supported? */
-	if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) ||
-	    rr->bit_width != 8 || rr->bit_offset != 0)
+	/*
+	 * Is the ACPI reset register supported?
+	 *
+	 * According to ACPI 3.0, FADT.flags.RESET_REG_SUP indicates
+	 * whether the ACPI reset mechanism is supported.
+	 *
+	 * However, some boxes have this bit clear, yet a valid
+	 * ACPI_RESET_REG & RESET_VALUE, and ACPI reboot is the only
+	 * mechanism that works for them after S3.
+	 *
+	 * This suggests that other operating systems may not be checking
+	 * the RESET_REG_SUP bit, and are using other means to decide
+	 * whether to use the ACPI reboot mechanism or not.
+	 *
+	 * So when acpi reboot is requested,
+	 * only the reset_register is checked. If the following
+	 * conditions are met, it indicates that the reset register is supported.
+	 * 	a. reset_register is not zero
+	 * 	b. the access width is eight
+	 * 	c. the bit_offset is zero
+	 */
+	if (!(rr->address) || rr->bit_width != 8 || rr->bit_offset != 0)
 		return;
 
 	reset_value = acpi_gbl_FADT.reset_value;
diff --git a/drivers/acpi/resources/rscalc.c b/drivers/acpi/resources/rscalc.c
index d9063ea..8eaaecf 100644
--- a/drivers/acpi/resources/rscalc.c
+++ b/drivers/acpi/resources/rscalc.c
@@ -43,7 +43,6 @@
 
 #include <acpi/acpi.h>
 #include <acpi/acresrc.h>
-#include <acpi/amlcode.h>
 #include <acpi/acnamesp.h>
 
 #define _COMPONENT          ACPI_RESOURCES
@@ -560,8 +559,8 @@
 			      ACPI_GET_OBJECT_TYPE(*sub_object_list)) ||
 			     ((ACPI_TYPE_LOCAL_REFERENCE ==
 			       ACPI_GET_OBJECT_TYPE(*sub_object_list)) &&
-			      ((*sub_object_list)->reference.opcode ==
-			       AML_INT_NAMEPATH_OP)))) {
+			      ((*sub_object_list)->reference.class ==
+			       ACPI_REFCLASS_NAME)))) {
 				name_found = TRUE;
 			} else {
 				/* Look at the next element */
diff --git a/drivers/acpi/resources/rscreate.c b/drivers/acpi/resources/rscreate.c
index 7804a8c..c0bbfa2 100644
--- a/drivers/acpi/resources/rscreate.c
+++ b/drivers/acpi/resources/rscreate.c
@@ -43,7 +43,6 @@
 
 #include <acpi/acpi.h>
 #include <acpi/acresrc.h>
-#include <acpi/amlcode.h>
 #include <acpi/acnamesp.h>
 
 #define _COMPONENT          ACPI_RESOURCES
@@ -310,13 +309,12 @@
 			switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
 			case ACPI_TYPE_LOCAL_REFERENCE:
 
-				if (obj_desc->reference.opcode !=
-				    AML_INT_NAMEPATH_OP) {
+				if (obj_desc->reference.class !=
+				    ACPI_REFCLASS_NAME) {
 					ACPI_ERROR((AE_INFO,
-						    "(PRT[%X].Source) Need name, found reference op %X",
+						    "(PRT[%X].Source) Need name, found Reference Class %X",
 						    index,
-						    obj_desc->reference.
-						    opcode));
+						    obj_desc->reference.class));
 					return_ACPI_STATUS(AE_BAD_DATA);
 				}
 
diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c
index 7b011e7..6050ce4 100644
--- a/drivers/acpi/sbs.c
+++ b/drivers/acpi/sbs.c
@@ -931,7 +931,7 @@
 	sbs->device = device;
 	strcpy(acpi_device_name(device), ACPI_SBS_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_SBS_CLASS);
-	acpi_driver_data(device) = sbs;
+	device->driver_data = sbs;
 
 	result = acpi_charger_add(sbs);
 	if (result)
diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c
index a4e3767..e53e590 100644
--- a/drivers/acpi/sbshc.c
+++ b/drivers/acpi/sbshc.c
@@ -258,7 +258,7 @@
 static int acpi_smbus_hc_add(struct acpi_device *device)
 {
 	int status;
-	unsigned long val;
+	unsigned long long val;
 	struct acpi_smb_hc *hc;
 
 	if (!device)
@@ -282,7 +282,7 @@
 	hc->ec = acpi_driver_data(device->parent);
 	hc->offset = (val >> 8) & 0xff;
 	hc->query_bit = val & 0xff;
-	acpi_driver_data(device) = hc;
+	device->driver_data = hc;
 
 	acpi_ec_add_query_handler(hc->ec, hc->query_bit, NULL, smbus_alarm, hc);
 	printk(KERN_INFO PREFIX "SBS HC: EC = 0x%p, offset = 0x%0x, query_bit = 0x%0x\n",
@@ -303,7 +303,7 @@
 	hc = acpi_driver_data(device);
 	acpi_ec_remove_query_handler(hc->ec, hc->query_bit);
 	kfree(hc);
-	acpi_driver_data(device) = NULL;
+	device->driver_data = NULL;
 	return 0;
 }
 
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index f6f52c1..a9dda8e 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -113,16 +113,16 @@
 
 
 	if (acpi_bus_trim(device, 1)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				"Removing device failed\n"));
+		printk(KERN_ERR PREFIX
+				"Removing device failed\n");
 		return -1;
 	}
 
 	/* power off device */
 	status = acpi_evaluate_object(handle, "_PS3", NULL, NULL);
 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND)
-		ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-				"Power-off device failed\n"));
+		printk(KERN_WARNING PREFIX
+				"Power-off device failed\n");
 
 	if (device->flags.lockable) {
 		arg_list.count = 1;
@@ -276,6 +276,13 @@
 {
 	const struct acpi_device_id *id;
 
+	/*
+	 * If the device is not present, it is unnecessary to load device
+	 * driver for it.
+	 */
+	if (!device->status.present)
+		return -ENODEV;
+
 	if (device->flags.hardware_id) {
 		for (id = ids; id->id[0]; id++) {
 			if (!strcmp((char*)id->id, device->pnp.hardware_id))
@@ -384,7 +391,7 @@
 			acpi_drv->ops.remove(acpi_dev, acpi_dev->removal_type);
 	}
 	acpi_dev->driver = NULL;
-	acpi_driver_data(dev) = NULL;
+	acpi_dev->driver_data = NULL;
 
 	put_device(dev);
 	return 0;
@@ -477,7 +484,7 @@
 
 	result = acpi_device_setup_files(device);
 	if(result)
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error creating sysfs interface for device %s\n", device->dev.bus_id));
+		printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", device->dev.bus_id);
 
 	device->removal_type = ACPI_BUS_REMOVAL_NORMAL;
 	return 0;
@@ -537,7 +544,7 @@
 	result = driver->ops.add(device);
 	if (result) {
 		device->driver = NULL;
-		acpi_driver_data(device) = NULL;
+		device->driver_data = NULL;
 		return result;
 	}
 
@@ -744,6 +751,16 @@
 	if (!acpi_match_device_ids(device, button_device_ids))
 		device->wakeup.flags.run_wake = 1;
 
+	/*
+	 * Don't set Power button GPE as run_wake
+	 * if Fixed Power button is used
+	 */
+	if (!strcmp(device->pnp.hardware_id, "PNP0C0C") &&
+		!(acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON)) {
+		device->wakeup.flags.run_wake = 0;
+		device->wakeup.flags.valid = 0;
+	}
+
       end:
 	if (ACPI_FAILURE(status))
 		device->flags.wake_capable = 0;
@@ -807,6 +824,7 @@
 	/* TBD: System wake support and resource requirements. */
 
 	device->power.state = ACPI_STATE_UNKNOWN;
+	acpi_bus_get_power(device->handle, &(device->power.state));
 
 	return 0;
 }
@@ -1153,20 +1171,6 @@
 }
 
 static int
-acpi_is_child_device(struct acpi_device *device,
-			int (*matcher)(struct acpi_device *))
-{
-	int result = -ENODEV;
-
-	do {
-		if (ACPI_SUCCESS(matcher(device)))
-			return AE_OK;
-	} while ((device = device->parent));
-
-	return result;
-}
-
-static int
 acpi_add_single_object(struct acpi_device **child,
 		       struct acpi_device *parent, acpi_handle handle, int type,
 			struct acpi_bus_ops *ops)
@@ -1221,15 +1225,18 @@
 			result = -ENODEV;
 			goto end;
 		}
-		if (!device->status.present) {
-			/* Bay and dock should be handled even if absent */
-			if (!ACPI_SUCCESS(
-			     acpi_is_child_device(device, acpi_bay_match)) &&
-			    !ACPI_SUCCESS(
-			     acpi_is_child_device(device, acpi_dock_match))) {
-					result = -ENODEV;
-					goto end;
-			}
+		/*
+		 * When the device is neither present nor functional, the
+		 * device should not be added to Linux ACPI device tree.
+		 * When the status of the device is not present but functinal,
+		 * it should be added to Linux ACPI tree. For example : bay
+		 * device , dock device.
+		 * In such conditions it is unncessary to check whether it is
+		 * bay device or dock device.
+		 */
+		if (!device->status.present && !device->status.functional) {
+			result = -ENODEV;
+			goto end;
 		}
 		break;
 	default:
@@ -1252,6 +1259,16 @@
 	acpi_device_set_id(device, parent, handle, type);
 
 	/*
+	 * The ACPI device is attached to acpi handle before getting
+	 * the power/wakeup/peformance flags. Otherwise OS can't get
+	 * the corresponding ACPI device by the acpi handle in the course
+	 * of getting the power/wakeup/performance flags.
+	 */
+	result = acpi_device_set_context(device, type);
+	if (result)
+		goto end;
+
+	/*
 	 * Power Management
 	 * ----------------
 	 */
@@ -1281,8 +1298,6 @@
 			goto end;
 	}
 
-	if ((result = acpi_device_set_context(device, type)))
-		goto end;
 
 	result = acpi_device_register(device, parent);
 
@@ -1402,7 +1417,12 @@
 		 * TBD: Need notifications and other detection mechanisms
 		 *      in place before we can fully implement this.
 		 */
-		if (child->status.present) {
+		 /*
+		 * When the device is not present but functional, it is also
+		 * necessary to scan the children of this device.
+		 */
+		if (child->status.present || (!child->status.present &&
+					child->status.functional)) {
 			status = acpi_get_next_object(ACPI_TYPE_ANY, chandle,
 						      NULL, NULL);
 			if (ACPI_SUCCESS(status)) {
@@ -1545,7 +1565,6 @@
 	return result;
 }
 
-int __init acpi_boot_ec_enable(void);
 
 static int __init acpi_scan_init(void)
 {
@@ -1579,9 +1598,6 @@
 	 */
 	result = acpi_bus_scan_fixed(acpi_root);
 
-	/* EC region might be needed at bus_scan, so enable it now */
-	acpi_boot_ec_enable();
-
 	if (!result)
 		result = acpi_bus_scan(acpi_root, &ops);
 
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index d13194a..80c0868 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -15,6 +15,7 @@
 #include <linux/dmi.h>
 #include <linux/device.h>
 #include <linux/suspend.h>
+#include <linux/reboot.h>
 
 #include <asm/io.h>
 
@@ -24,6 +25,36 @@
 
 u8 sleep_states[ACPI_S_STATE_COUNT];
 
+static void acpi_sleep_tts_switch(u32 acpi_state)
+{
+	union acpi_object in_arg = { ACPI_TYPE_INTEGER };
+	struct acpi_object_list arg_list = { 1, &in_arg };
+	acpi_status status = AE_OK;
+
+	in_arg.integer.value = acpi_state;
+	status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL);
+	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+		/*
+		 * OS can't evaluate the _TTS object correctly. Some warning
+		 * message will be printed. But it won't break anything.
+		 */
+		printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
+	}
+}
+
+static int tts_notify_reboot(struct notifier_block *this,
+			unsigned long code, void *x)
+{
+	acpi_sleep_tts_switch(ACPI_STATE_S5);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block tts_notifier = {
+	.notifier_call	= tts_notify_reboot,
+	.next		= NULL,
+	.priority	= 0,
+};
+
 static int acpi_sleep_prepare(u32 acpi_state)
 {
 #ifdef CONFIG_ACPI_SLEEP
@@ -45,9 +76,8 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_ACPI_SLEEP
 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-
 /*
  * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
  * user to request that behavior by using the 'acpi_old_suspend_ordering'
@@ -131,8 +161,11 @@
 	 * failing transition to a sleep state.
 	 */
 	acpi_target_sleep_state = ACPI_STATE_S0;
+	acpi_sleep_tts_switch(acpi_target_sleep_state);
 }
-#endif /* CONFIG_PM_SLEEP */
+#else /* !CONFIG_ACPI_SLEEP */
+#define acpi_target_sleep_state	ACPI_STATE_S0
+#endif /* CONFIG_ACPI_SLEEP */
 
 #ifdef CONFIG_SUSPEND
 extern void do_suspend_lowlevel(void);
@@ -155,6 +188,7 @@
 
 	if (sleep_states[acpi_state]) {
 		acpi_target_sleep_state = acpi_state;
+		acpi_sleep_tts_switch(acpi_target_sleep_state);
 	} else {
 		printk(KERN_ERR "ACPI does not support this state: %d\n",
 			pm_state);
@@ -200,6 +234,8 @@
 		break;
 	}
 
+	/* If ACPI is not enabled by the BIOS, we need to enable it here. */
+	acpi_enable();
 	/* Reprogram control registers and execute _BFS */
 	acpi_leave_sleep_state_prep(acpi_state);
 
@@ -296,6 +332,14 @@
 		DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
 		},
 	},
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "HP xw4600 Workstation",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
+		},
+	},
 	{},
 };
 #endif /* CONFIG_SUSPEND */
@@ -313,6 +357,7 @@
 static int acpi_hibernation_begin(void)
 {
 	acpi_target_sleep_state = ACPI_STATE_S4;
+	acpi_sleep_tts_switch(acpi_target_sleep_state);
 	return 0;
 }
 
@@ -376,7 +421,15 @@
  */
 static int acpi_hibernation_begin_old(void)
 {
-	int error = acpi_sleep_prepare(ACPI_STATE_S4);
+	int error;
+	/*
+	 * The _TTS object should always be evaluated before the _PTS object.
+	 * When the old_suspended_ordering is true, the _PTS object is
+	 * evaluated in the acpi_sleep_prepare.
+	 */
+	acpi_sleep_tts_switch(ACPI_STATE_S4);
+
+	error = acpi_sleep_prepare(ACPI_STATE_S4);
 
 	if (!error)
 		acpi_target_sleep_state = ACPI_STATE_S4;
@@ -444,7 +497,7 @@
 	acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
 	struct acpi_device *adev;
 	char acpi_method[] = "_SxD";
-	unsigned long d_min, d_max;
+	unsigned long long d_min, d_max;
 
 	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
 		printk(KERN_DEBUG "ACPI handle has no context!\n");
@@ -596,5 +649,10 @@
 		pm_power_off = acpi_power_off;
 	}
 	printk(")\n");
+	/*
+	 * Register the tts_notifier to reboot notifier list so that the _TTS
+	 * object can also be evaluated when the system enters S5.
+	 */
+	register_reboot_notifier(&tts_notifier);
 	return 0;
 }
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index 24e80fd..1d74171 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -386,8 +386,8 @@
 		goto end;
 
 	if (!(all_counters[index].flags & ACPI_EVENT_VALID)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-			"Can not change Invalid GPE/Fixed Event status\n"));
+		printk(KERN_WARNING PREFIX
+			"Can not change Invalid GPE/Fixed Event status\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c
index a4a41ba..2c7885e 100644
--- a/drivers/acpi/tables/tbfadt.c
+++ b/drivers/acpi/tables/tbfadt.c
@@ -50,7 +50,7 @@
 /* Local prototypes */
 static void inline
 acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
-			     u8 bit_width, u64 address);
+			     u8 byte_width, u64 address);
 
 static void acpi_tb_convert_fadt(void);
 
@@ -111,7 +111,7 @@
  * FUNCTION:    acpi_tb_init_generic_address
  *
  * PARAMETERS:  generic_address     - GAS struct to be initialized
- *              bit_width           - Width of this register
+ *              byte_width          - Width of this register
  *              Address             - Address of the register
  *
  * RETURN:      None
@@ -124,7 +124,7 @@
 
 static void inline
 acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
-			     u8 bit_width, u64 address)
+			     u8 byte_width, u64 address)
 {
 
 	/*
@@ -136,7 +136,7 @@
 	/* All other fields are byte-wide */
 
 	generic_address->space_id = ACPI_ADR_SPACE_SYSTEM_IO;
-	generic_address->bit_width = bit_width;
+	generic_address->bit_width = byte_width << 3;
 	generic_address->bit_offset = 0;
 	generic_address->access_width = 0;
 }
@@ -342,9 +342,20 @@
 	 * useful to calculate them once, here.
 	 *
 	 * The PM event blocks are split into two register blocks, first is the
-	 * PM Status Register block, followed immediately by the PM Enable Register
-	 * block. Each is of length (pm1_event_length/2)
+	 * PM Status Register block, followed immediately by the PM Enable
+	 * Register block. Each is of length (xpm1x_event_block.bit_width/2).
+	 *
+	 * On various systems the v2 fields (and particularly the bit widths)
+	 * cannot be relied upon, though. Hence resort to using the v1 length
+	 * here (and warn about the inconsistency).
 	 */
+	if (acpi_gbl_FADT.xpm1a_event_block.bit_width
+	    != acpi_gbl_FADT.pm1_event_length * 8)
+		printk(KERN_WARNING "FADT: "
+		       "X_PM1a_EVT_BLK.bit_width (%u) does not match"
+		       " PM1_EVT_LEN (%u)\n",
+		       acpi_gbl_FADT.xpm1a_event_block.bit_width,
+		       acpi_gbl_FADT.pm1_event_length);
 	pm1_register_length = (u8) ACPI_DIV_2(acpi_gbl_FADT.pm1_event_length);
 
 	/* The PM1A register block is required */
@@ -360,13 +371,20 @@
 	/* The PM1B register block is optional, ignore if not present */
 
 	if (acpi_gbl_FADT.xpm1b_event_block.address) {
+		if (acpi_gbl_FADT.xpm1b_event_block.bit_width
+		    != acpi_gbl_FADT.pm1_event_length * 8)
+			printk(KERN_WARNING "FADT: "
+			       "X_PM1b_EVT_BLK.bit_width (%u) does not match"
+			       " PM1_EVT_LEN (%u)\n",
+			       acpi_gbl_FADT.xpm1b_event_block.bit_width,
+			       acpi_gbl_FADT.pm1_event_length);
 		acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable,
 					     pm1_register_length,
 					     (acpi_gbl_FADT.xpm1b_event_block.
 					      address + pm1_register_length));
 		/* Don't forget to copy space_id of the GAS */
 		acpi_gbl_xpm1b_enable.space_id =
-		    acpi_gbl_FADT.xpm1a_event_block.space_id;
+		    acpi_gbl_FADT.xpm1b_event_block.space_id;
 
 	}
 }
diff --git a/drivers/acpi/tables/tbinstal.c b/drivers/acpi/tables/tbinstal.c
index b22185f..18747ce 100644
--- a/drivers/acpi/tables/tbinstal.c
+++ b/drivers/acpi/tables/tbinstal.c
@@ -110,7 +110,6 @@
 acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index)
 {
 	u32 i;
-	u32 length;
 	acpi_status status = AE_OK;
 
 	ACPI_FUNCTION_TRACE(tb_add_table);
@@ -145,25 +144,64 @@
 			}
 		}
 
-		length = ACPI_MIN(table_desc->length,
-				  acpi_gbl_root_table_list.tables[i].length);
-		if (ACPI_MEMCMP(table_desc->pointer,
-				acpi_gbl_root_table_list.tables[i].pointer,
-				length)) {
+		/*
+		 * Check for a table match on the entire table length,
+		 * not just the header.
+		 */
+		if (table_desc->length !=
+		    acpi_gbl_root_table_list.tables[i].length) {
 			continue;
 		}
 
-		/* Table is already registered */
+		if (ACPI_MEMCMP(table_desc->pointer,
+				acpi_gbl_root_table_list.tables[i].pointer,
+				acpi_gbl_root_table_list.tables[i].length)) {
+			continue;
+		}
 
+		/*
+		 * Note: the current mechanism does not unregister a table if it is
+		 * dynamically unloaded. The related namespace entries are deleted,
+		 * but the table remains in the root table list.
+		 *
+		 * The assumption here is that the number of different tables that
+		 * will be loaded is actually small, and there is minimal overhead
+		 * in just keeping the table in case it is needed again.
+		 *
+		 * If this assumption changes in the future (perhaps on large
+		 * machines with many table load/unload operations), tables will
+		 * need to be unregistered when they are unloaded, and slots in the
+		 * root table list should be reused when empty.
+		 */
+
+		/*
+		 * Table is already registered.
+		 * We can delete the table that was passed as a parameter.
+		 */
 		acpi_tb_delete_table(table_desc);
 		*table_index = i;
-		status = AE_ALREADY_EXISTS;
-		goto release;
+
+		if (acpi_gbl_root_table_list.tables[i].
+		    flags & ACPI_TABLE_IS_LOADED) {
+
+			/* Table is still loaded, this is an error */
+
+			status = AE_ALREADY_EXISTS;
+			goto release;
+		} else {
+			/* Table was unloaded, allow it to be reloaded */
+
+			table_desc->pointer =
+			    acpi_gbl_root_table_list.tables[i].pointer;
+			table_desc->address =
+			    acpi_gbl_root_table_list.tables[i].address;
+			status = AE_OK;
+			goto print_header;
+		}
 	}
 
-	/*
-	 * Add the table to the global table list
-	 */
+	/* Add the table to the global root table list */
+
 	status = acpi_tb_store_table(table_desc->address, table_desc->pointer,
 				     table_desc->length, table_desc->flags,
 				     table_index);
@@ -171,6 +209,7 @@
 		goto release;
 	}
 
+      print_header:
 	acpi_tb_print_table_header(table_desc->address, table_desc->pointer);
 
       release:
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 9127036..ad6cae9 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -246,18 +246,18 @@
 static int acpi_thermal_get_temperature(struct acpi_thermal *tz)
 {
 	acpi_status status = AE_OK;
-
+	unsigned long long tmp;
 
 	if (!tz)
 		return -EINVAL;
 
 	tz->last_temperature = tz->temperature;
 
-	status =
-	    acpi_evaluate_integer(tz->device->handle, "_TMP", NULL, &tz->temperature);
+	status = acpi_evaluate_integer(tz->device->handle, "_TMP", NULL, &tmp);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
+	tz->temperature = tmp;
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Temperature is %lu dK\n",
 			  tz->temperature));
 
@@ -267,17 +267,16 @@
 static int acpi_thermal_get_polling_frequency(struct acpi_thermal *tz)
 {
 	acpi_status status = AE_OK;
-
+	unsigned long long tmp;
 
 	if (!tz)
 		return -EINVAL;
 
-	status =
-	    acpi_evaluate_integer(tz->device->handle, "_TZP", NULL,
-				  &tz->polling_frequency);
+	status = acpi_evaluate_integer(tz->device->handle, "_TZP", NULL, &tmp);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
+	tz->polling_frequency = tmp;
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Polling frequency is %lu dS\n",
 			  tz->polling_frequency));
 
@@ -356,6 +355,7 @@
 static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 {
 	acpi_status status = AE_OK;
+	unsigned long long tmp;
 	struct acpi_handle_list devices;
 	int valid = 0;
 	int i;
@@ -363,7 +363,8 @@
 	/* Critical Shutdown (required) */
 	if (flag & ACPI_TRIPS_CRITICAL) {
 		status = acpi_evaluate_integer(tz->device->handle,
-				"_CRT", NULL, &tz->trips.critical.temperature);
+				"_CRT", NULL, &tmp);
+		tz->trips.critical.temperature = tmp;
 		/*
 		 * Treat freezing temperatures as invalid as well; some
 		 * BIOSes return really low values and cause reboots at startup.
@@ -388,10 +389,12 @@
 			} else if (crt > 0) {
 				unsigned long crt_k = CELSIUS_TO_KELVIN(crt);
 				/*
-				 * Allow override to lower critical threshold
+				 * Allow override critical threshold
 				 */
-				if (crt_k < tz->trips.critical.temperature)
-					tz->trips.critical.temperature = crt_k;
+				if (crt_k > tz->trips.critical.temperature)
+					printk(KERN_WARNING PREFIX
+						"Critical threshold %d C\n", crt);
+				tz->trips.critical.temperature = crt_k;
 			}
 		}
 	}
@@ -399,12 +402,13 @@
 	/* Critical Sleep (optional) */
 	if (flag & ACPI_TRIPS_HOT) {
 		status = acpi_evaluate_integer(tz->device->handle,
-				"_HOT", NULL, &tz->trips.hot.temperature);
+				"_HOT", NULL, &tmp);
 		if (ACPI_FAILURE(status)) {
 			tz->trips.hot.flags.valid = 0;
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 					"No hot threshold\n"));
 		} else {
+			tz->trips.hot.temperature = tmp;
 			tz->trips.hot.flags.valid = 1;
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 					"Found hot threshold [%lu]\n",
@@ -418,33 +422,40 @@
 		if (psv == -1) {
 			status = AE_SUPPORT;
 		} else if (psv > 0) {
-			tz->trips.passive.temperature = CELSIUS_TO_KELVIN(psv);
+			tmp = CELSIUS_TO_KELVIN(psv);
 			status = AE_OK;
 		} else {
 			status = acpi_evaluate_integer(tz->device->handle,
-				"_PSV", NULL, &tz->trips.passive.temperature);
+				"_PSV", NULL, &tmp);
 		}
 
 		if (ACPI_FAILURE(status))
 			tz->trips.passive.flags.valid = 0;
 		else {
+			tz->trips.passive.temperature = tmp;
 			tz->trips.passive.flags.valid = 1;
 			if (flag == ACPI_TRIPS_INIT) {
 				status = acpi_evaluate_integer(
 						tz->device->handle, "_TC1",
-						NULL, &tz->trips.passive.tc1);
+						NULL, &tmp);
 				if (ACPI_FAILURE(status))
 					tz->trips.passive.flags.valid = 0;
+				else
+					tz->trips.passive.tc1 = tmp;
 				status = acpi_evaluate_integer(
 						tz->device->handle, "_TC2",
-						NULL, &tz->trips.passive.tc2);
+						NULL, &tmp);
 				if (ACPI_FAILURE(status))
 					tz->trips.passive.flags.valid = 0;
+				else
+					tz->trips.passive.tc2 = tmp;
 				status = acpi_evaluate_integer(
 						tz->device->handle, "_TSP",
-						NULL, &tz->trips.passive.tsp);
+						NULL, &tmp);
 				if (ACPI_FAILURE(status))
 					tz->trips.passive.flags.valid = 0;
+				else
+					tz->trips.passive.tsp = tmp;
 			}
 		}
 	}
@@ -479,7 +490,7 @@
 
 		if (flag & ACPI_TRIPS_ACTIVE) {
 			status = acpi_evaluate_integer(tz->device->handle,
-				name, NULL, &tz->trips.active[i].temperature);
+							name, NULL, &tmp);
 			if (ACPI_FAILURE(status)) {
 				tz->trips.active[i].flags.valid = 0;
 				if (i == 0)
@@ -500,8 +511,10 @@
 						tz->trips.active[i - 2].temperature :
 						CELSIUS_TO_KELVIN(act));
 				break;
-			} else
+			} else {
+				tz->trips.active[i].temperature = tmp;
 				tz->trips.active[i].flags.valid = 1;
+			}
 		}
 
 		name[2] = 'L';
@@ -1213,8 +1226,8 @@
 				  acpi_bus_private_data_handler,
 				  tz->thermal_zone);
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				"Error attaching device data\n"));
+		printk(KERN_ERR PREFIX
+				"Error attaching device data\n");
 		return -ENODEV;
 	}
 
@@ -1647,7 +1660,7 @@
 	strcpy(tz->name, device->pnp.bus_id);
 	strcpy(acpi_device_name(device), ACPI_THERMAL_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS);
-	acpi_driver_data(device) = tz;
+	device->driver_data = tz;
 	mutex_init(&tz->lock);
 
 
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
index 8a649f4..66aac06 100644
--- a/drivers/acpi/toshiba_acpi.c
+++ b/drivers/acpi/toshiba_acpi.c
@@ -371,6 +371,7 @@
 				   RFKILL_STATE_HARD_BLOCKED);
 		input_report_switch(poll_dev->input, SW_RFKILL_ALL,
 				    new_rfk_state);
+		input_sync(poll_dev->input);
 	}
 }
 
@@ -548,7 +549,7 @@
 
 	hci_read1(HCI_VIDEO_OUT, &video_out, &hci_result);
 	if (hci_result == HCI_SUCCESS) {
-		int new_video_out = video_out;
+		unsigned int new_video_out = video_out;
 		if (lcd_out != -1)
 			_set_bit(&new_video_out, HCI_VIDEO_OUT_LCD, lcd_out);
 		if (crt_out != -1)
@@ -842,6 +843,7 @@
 	set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
 	set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
 	input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
+	input_sync(toshiba_acpi.poll_dev->input);
 
 	ret = input_register_polled_device(toshiba_acpi.poll_dev);
 	if (ret) {
diff --git a/drivers/acpi/utilities/utalloc.c b/drivers/acpi/utilities/utalloc.c
index 7dcb67e..241c535 100644
--- a/drivers/acpi/utilities/utalloc.c
+++ b/drivers/acpi/utilities/utalloc.c
@@ -232,7 +232,7 @@
  * RETURN:      Status
  *
  * DESCRIPTION: Validate that the buffer is of the required length or
- *              allocate a new buffer.  Returned buffer is always zeroed.
+ *              allocate a new buffer. Returned buffer is always zeroed.
  *
  ******************************************************************************/
 
@@ -240,7 +240,7 @@
 acpi_ut_initialize_buffer(struct acpi_buffer * buffer,
 			  acpi_size required_length)
 {
-	acpi_status status = AE_OK;
+	acpi_size input_buffer_length;
 
 	/* Parameter validation */
 
@@ -248,55 +248,58 @@
 		return (AE_BAD_PARAMETER);
 	}
 
-	switch (buffer->length) {
+	/*
+	 * Buffer->Length is used as both an input and output parameter. Get the
+	 * input actual length and set the output required buffer length.
+	 */
+	input_buffer_length = buffer->length;
+	buffer->length = required_length;
+
+	/*
+	 * The input buffer length contains the actual buffer length, or the type
+	 * of buffer to be allocated by this routine.
+	 */
+	switch (input_buffer_length) {
 	case ACPI_NO_BUFFER:
 
-		/* Set the exception and returned the required length */
+		/* Return the exception (and the required buffer length) */
 
-		status = AE_BUFFER_OVERFLOW;
-		break;
+		return (AE_BUFFER_OVERFLOW);
 
 	case ACPI_ALLOCATE_BUFFER:
 
 		/* Allocate a new buffer */
 
 		buffer->pointer = acpi_os_allocate(required_length);
-		if (!buffer->pointer) {
-			return (AE_NO_MEMORY);
-		}
-
-		/* Clear the buffer */
-
-		ACPI_MEMSET(buffer->pointer, 0, required_length);
 		break;
 
 	case ACPI_ALLOCATE_LOCAL_BUFFER:
 
 		/* Allocate a new buffer with local interface to allow tracking */
 
-		buffer->pointer = ACPI_ALLOCATE_ZEROED(required_length);
-		if (!buffer->pointer) {
-			return (AE_NO_MEMORY);
-		}
+		buffer->pointer = ACPI_ALLOCATE(required_length);
 		break;
 
 	default:
 
 		/* Existing buffer: Validate the size of the buffer */
 
-		if (buffer->length < required_length) {
-			status = AE_BUFFER_OVERFLOW;
-			break;
+		if (input_buffer_length < required_length) {
+			return (AE_BUFFER_OVERFLOW);
 		}
-
-		/* Clear the buffer */
-
-		ACPI_MEMSET(buffer->pointer, 0, required_length);
 		break;
 	}
 
-	buffer->length = required_length;
-	return (status);
+	/* Validate allocation from above or input buffer pointer */
+
+	if (!buffer->pointer) {
+		return (AE_NO_MEMORY);
+	}
+
+	/* Have a valid buffer, clear it */
+
+	ACPI_MEMSET(buffer->pointer, 0, required_length);
+	return (AE_OK);
 }
 
 #ifdef NOT_USED_BY_LINUX
diff --git a/drivers/acpi/utilities/utcopy.c b/drivers/acpi/utilities/utcopy.c
index 53499ac..5b2f7c27 100644
--- a/drivers/acpi/utilities/utcopy.c
+++ b/drivers/acpi/utilities/utcopy.c
@@ -42,7 +42,6 @@
  */
 
 #include <acpi/acpi.h>
-#include <acpi/amlcode.h>
 #include <acpi/acnamesp.h>
 
 
@@ -176,20 +175,24 @@
 
 		/* This is an object reference. */
 
-		switch (internal_object->reference.opcode) {
-		case AML_INT_NAMEPATH_OP:
+		switch (internal_object->reference.class) {
+		case ACPI_REFCLASS_NAME:
 
-			/* For namepath, return the object handle ("reference") */
-
-		default:
-
-			/* We are referring to the namespace node */
-
+			/*
+			 * For namepath, return the object handle ("reference")
+			 * We are referring to the namespace node
+			 */
 			external_object->reference.handle =
 			    internal_object->reference.node;
 			external_object->reference.actual_type =
 			    acpi_ns_get_type(internal_object->reference.node);
 			break;
+
+		default:
+
+			/* All other reference types are unsupported */
+
+			return_ACPI_STATUS(AE_TYPE);
 		}
 		break;
 
@@ -533,7 +536,7 @@
 
 		/* TBD: should validate incoming handle */
 
-		internal_object->reference.opcode = AML_INT_NAMEPATH_OP;
+		internal_object->reference.class = ACPI_REFCLASS_NAME;
 		internal_object->reference.node =
 		    external_object->reference.handle;
 		break;
@@ -743,11 +746,11 @@
 		 * We copied the reference object, so we now must add a reference
 		 * to the object pointed to by the reference
 		 *
-		 * DDBHandle reference (from Load/load_table is a special reference,
-		 * it's Reference.Object is the table index, so does not need to
+		 * DDBHandle reference (from Load/load_table) is a special reference,
+		 * it does not have a Reference.Object, so does not need to
 		 * increase the reference count
 		 */
-		if (source_desc->reference.opcode == AML_LOAD_OP) {
+		if (source_desc->reference.class == ACPI_REFCLASS_TABLE) {
 			break;
 		}
 
diff --git a/drivers/acpi/utilities/utdelete.c b/drivers/acpi/utilities/utdelete.c
index 42609d3..d197c6b 100644
--- a/drivers/acpi/utilities/utdelete.c
+++ b/drivers/acpi/utilities/utdelete.c
@@ -45,7 +45,6 @@
 #include <acpi/acinterp.h>
 #include <acpi/acnamesp.h>
 #include <acpi/acevents.h>
-#include <acpi/amlcode.h>
 
 #define _COMPONENT          ACPI_UTILITIES
 ACPI_MODULE_NAME("utdelete")
@@ -548,8 +547,8 @@
 			 * reference must track changes to the ref count of the index or
 			 * target object.
 			 */
-			if ((object->reference.opcode == AML_INDEX_OP) ||
-			    (object->reference.opcode == AML_INT_NAMEPATH_OP)) {
+			if ((object->reference.class == ACPI_REFCLASS_INDEX) ||
+			    (object->reference.class == ACPI_REFCLASS_NAME)) {
 				next_object = object->reference.object;
 			}
 			break;
@@ -586,6 +585,13 @@
 	ACPI_EXCEPTION((AE_INFO, status,
 			"Could not update object reference count"));
 
+	/* Free any stacked Update State objects */
+
+	while (state_list) {
+		state = acpi_ut_pop_generic_state(&state_list);
+		acpi_ut_delete_generic_state(state);
+	}
+
 	return_ACPI_STATUS(status);
 }
 
diff --git a/drivers/acpi/utilities/utglobal.c b/drivers/acpi/utilities/utglobal.c
index a6e71b8..670551b 100644
--- a/drivers/acpi/utilities/utglobal.c
+++ b/drivers/acpi/utilities/utglobal.c
@@ -281,7 +281,6 @@
 	/* ACPI_BITREG_RT_CLOCK_ENABLE      */ {ACPI_REGISTER_PM1_ENABLE,
 						ACPI_BITPOSITION_RT_CLOCK_ENABLE,
 						ACPI_BITMASK_RT_CLOCK_ENABLE},
-	/* ACPI_BITREG_WAKE_ENABLE          */ {ACPI_REGISTER_PM1_ENABLE, 0, 0},
 	/* ACPI_BITREG_PCIEXP_WAKE_DISABLE  */ {ACPI_REGISTER_PM1_ENABLE,
 						ACPI_BITPOSITION_PCIEXP_WAKE_DISABLE,
 						ACPI_BITMASK_PCIEXP_WAKE_DISABLE},
@@ -575,6 +574,47 @@
 
 }
 
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_get_reference_name
+ *
+ * PARAMETERS:  Object               - An ACPI reference object
+ *
+ * RETURN:      Pointer to a string
+ *
+ * DESCRIPTION: Decode a reference object sub-type to a string.
+ *
+ ******************************************************************************/
+
+/* Printable names of reference object sub-types */
+
+static const char *acpi_gbl_ref_class_names[] = {
+	/* 00 */ "Local",
+	/* 01 */ "Argument",
+	/* 02 */ "RefOf",
+	/* 03 */ "Index",
+	/* 04 */ "DdbHandle",
+	/* 05 */ "Named Object",
+	/* 06 */ "Debug"
+};
+
+const char *acpi_ut_get_reference_name(union acpi_operand_object *object)
+{
+	if (!object)
+		return "NULL Object";
+
+	if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND)
+		return "Not an Operand object";
+
+	if (object->common.type != ACPI_TYPE_LOCAL_REFERENCE)
+		return "Not a Reference object";
+
+	if (object->reference.class > ACPI_REFCLASS_MAX)
+		return "Unknown Reference class";
+
+	return acpi_gbl_ref_class_names[object->reference.class];
+}
+
 #if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
 /*
  * Strings and procedures used for debug only
@@ -677,14 +717,14 @@
  *
  * PARAMETERS:  None
  *
- * RETURN:      None
+ * RETURN:      Status
  *
  * DESCRIPTION: Init library globals.  All globals that require specific
  *              initialization should be initialized here!
  *
  ******************************************************************************/
 
-void acpi_ut_init_globals(void)
+acpi_status acpi_ut_init_globals(void)
 {
 	acpi_status status;
 	u32 i;
@@ -695,7 +735,7 @@
 
 	status = acpi_ut_create_caches();
 	if (ACPI_FAILURE(status)) {
-		return;
+		return_ACPI_STATUS(status);
 	}
 
 	/* Mutex locked flags */
@@ -772,8 +812,8 @@
 	acpi_gbl_display_final_mem_stats = FALSE;
 #endif
 
-	return_VOID;
+	return_ACPI_STATUS(AE_OK);
 }
 
 ACPI_EXPORT_SYMBOL(acpi_dbg_level)
-    ACPI_EXPORT_SYMBOL(acpi_dbg_layer)
+ACPI_EXPORT_SYMBOL(acpi_dbg_layer)
diff --git a/drivers/acpi/utilities/utmisc.c b/drivers/acpi/utilities/utmisc.c
index f34be67..9089a15 100644
--- a/drivers/acpi/utilities/utmisc.c
+++ b/drivers/acpi/utilities/utmisc.c
@@ -995,6 +995,15 @@
 							 state->pkg.
 							 this_target_obj, 0);
 			if (!state) {
+
+				/* Free any stacked Update State objects */
+
+				while (state_list) {
+					state =
+					    acpi_ut_pop_generic_state
+					    (&state_list);
+					acpi_ut_delete_generic_state(state);
+				}
 				return_ACPI_STATUS(AE_NO_MEMORY);
 			}
 		}
diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c
index 916eff3..c354e7a 100644
--- a/drivers/acpi/utilities/utobject.c
+++ b/drivers/acpi/utilities/utobject.c
@@ -43,7 +43,6 @@
 
 #include <acpi/acpi.h>
 #include <acpi/acnamesp.h>
-#include <acpi/amlcode.h>
 
 #define _COMPONENT          ACPI_UTILITIES
 ACPI_MODULE_NAME("utobject")
@@ -478,8 +477,8 @@
 
 	case ACPI_TYPE_LOCAL_REFERENCE:
 
-		switch (internal_object->reference.opcode) {
-		case AML_INT_NAMEPATH_OP:
+		switch (internal_object->reference.class) {
+		case ACPI_REFCLASS_NAME:
 
 			/*
 			 * Get the actual length of the full pathname to this object.
@@ -503,8 +502,10 @@
 			 * required eventually.
 			 */
 			ACPI_ERROR((AE_INFO,
-				    "Unsupported Reference opcode=%X in object %p",
-				    internal_object->reference.opcode,
+				    "Cannot convert to external object - "
+				    "unsupported Reference Class [%s] %X in object %p",
+				    acpi_ut_get_reference_name(internal_object),
+				    internal_object->reference.class,
 				    internal_object));
 			status = AE_TYPE;
 			break;
@@ -513,7 +514,9 @@
 
 	default:
 
-		ACPI_ERROR((AE_INFO, "Unsupported type=%X in object %p",
+		ACPI_ERROR((AE_INFO, "Cannot convert to external object - "
+			    "unsupported type [%s] %X in object %p",
+			    acpi_ut_get_object_type_name(internal_object),
 			    ACPI_GET_OBJECT_TYPE(internal_object),
 			    internal_object));
 		status = AE_TYPE;
diff --git a/drivers/acpi/utilities/utxface.c b/drivers/acpi/utilities/utxface.c
index f8bdadf..c198a4d 100644
--- a/drivers/acpi/utilities/utxface.c
+++ b/drivers/acpi/utilities/utxface.c
@@ -81,7 +81,12 @@
 
 	/* Initialize all globals used by the subsystem */
 
-	acpi_ut_init_globals();
+	status = acpi_ut_init_globals();
+	if (ACPI_FAILURE(status)) {
+		ACPI_EXCEPTION((AE_INFO, status,
+				"During initialization of globals"));
+		return_ACPI_STATUS(status);
+	}
 
 	/* Create the default mutex objects */
 
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index 1009261..e827be3 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -256,7 +256,7 @@
 acpi_status
 acpi_evaluate_integer(acpi_handle handle,
 		      acpi_string pathname,
-		      struct acpi_object_list *arguments, unsigned long *data)
+		      struct acpi_object_list *arguments, unsigned long long *data)
 {
 	acpi_status status = AE_OK;
 	union acpi_object *element;
@@ -288,7 +288,7 @@
 	*data = element->integer.value;
 	kfree(element);
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%lu]\n", *data));
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%llu]\n", *data));
 
 	return AE_OK;
 }
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index e8a51a1..a29b0cc 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -291,20 +291,20 @@
 			int level);
 static int acpi_video_device_lcd_get_level_current(
 			struct acpi_video_device *device,
-			unsigned long *level);
+			unsigned long long *level);
 static int acpi_video_get_next_level(struct acpi_video_device *device,
 				     u32 level_current, u32 event);
 static void acpi_video_switch_brightness(struct acpi_video_device *device,
 					 int event);
 static int acpi_video_device_get_state(struct acpi_video_device *device,
-			    unsigned long *state);
+			    unsigned long long *state);
 static int acpi_video_output_get(struct output_device *od);
 static int acpi_video_device_set_state(struct acpi_video_device *device, int state);
 
 /*backlight device sysfs support*/
 static int acpi_video_get_brightness(struct backlight_device *bd)
 {
-	unsigned long cur_level;
+	unsigned long long cur_level;
 	int i;
 	struct acpi_video_device *vd =
 		(struct acpi_video_device *)bl_get_data(bd);
@@ -336,7 +336,7 @@
 /*video output device sysfs support*/
 static int acpi_video_output_get(struct output_device *od)
 {
-	unsigned long state;
+	unsigned long long state;
 	struct acpi_video_device *vd =
 		(struct acpi_video_device *)dev_get_drvdata(&od->dev);
 	acpi_video_device_get_state(vd, &state);
@@ -370,7 +370,7 @@
 {
 	struct acpi_device *device = cdev->devdata;
 	struct acpi_video_device *video = acpi_driver_data(device);
-	unsigned long level;
+	unsigned long long level;
 	int state;
 
 	acpi_video_device_lcd_get_level_current(video, &level);
@@ -410,7 +410,7 @@
 /* device */
 
 static int
-acpi_video_device_query(struct acpi_video_device *device, unsigned long *state)
+acpi_video_device_query(struct acpi_video_device *device, unsigned long long *state)
 {
 	int status;
 
@@ -421,7 +421,7 @@
 
 static int
 acpi_video_device_get_state(struct acpi_video_device *device,
-			    unsigned long *state)
+			    unsigned long long *state)
 {
 	int status;
 
@@ -436,7 +436,7 @@
 	int status;
 	union acpi_object arg0 = { ACPI_TYPE_INTEGER };
 	struct acpi_object_list args = { 1, &arg0 };
-	unsigned long ret;
+	unsigned long long ret;
 
 
 	arg0.integer.value = state;
@@ -495,7 +495,7 @@
 
 static int
 acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
-					unsigned long *level)
+					unsigned long long *level)
 {
 	if (device->cap._BQC)
 		return acpi_evaluate_integer(device->dev->handle, "_BQC", NULL,
@@ -549,7 +549,7 @@
 acpi_video_bus_set_POST(struct acpi_video_bus *video, unsigned long option)
 {
 	int status;
-	unsigned long tmp;
+	unsigned long long tmp;
 	union acpi_object arg0 = { ACPI_TYPE_INTEGER };
 	struct acpi_object_list args = { 1, &arg0 };
 
@@ -564,7 +564,7 @@
 }
 
 static int
-acpi_video_bus_get_POST(struct acpi_video_bus *video, unsigned long *id)
+acpi_video_bus_get_POST(struct acpi_video_bus *video, unsigned long long *id)
 {
 	int status;
 
@@ -575,7 +575,7 @@
 
 static int
 acpi_video_bus_POST_options(struct acpi_video_bus *video,
-			    unsigned long *options)
+			    unsigned long long *options)
 {
 	int status;
 
@@ -918,7 +918,7 @@
 {
 	int status;
 	struct acpi_video_device *dev = seq->private;
-	unsigned long state;
+	unsigned long long state;
 
 
 	if (!dev)
@@ -927,14 +927,14 @@
 	status = acpi_video_device_get_state(dev, &state);
 	seq_printf(seq, "state:     ");
 	if (ACPI_SUCCESS(status))
-		seq_printf(seq, "0x%02lx\n", state);
+		seq_printf(seq, "0x%02llx\n", state);
 	else
 		seq_printf(seq, "<not supported>\n");
 
 	status = acpi_video_device_query(dev, &state);
 	seq_printf(seq, "query:     ");
 	if (ACPI_SUCCESS(status))
-		seq_printf(seq, "0x%02lx\n", state);
+		seq_printf(seq, "0x%02llx\n", state);
 	else
 		seq_printf(seq, "<not supported>\n");
 
@@ -1217,7 +1217,7 @@
 static int acpi_video_bus_POST_info_seq_show(struct seq_file *seq, void *offset)
 {
 	struct acpi_video_bus *video = seq->private;
-	unsigned long options;
+	unsigned long long options;
 	int status;
 
 
@@ -1232,7 +1232,7 @@
 			printk(KERN_WARNING PREFIX
 			       "This indicates a BIOS bug. Please contact the manufacturer.\n");
 		}
-		printk("%lx\n", options);
+		printk("%llx\n", options);
 		seq_printf(seq, "can POST: <integrated video>");
 		if (options & 2)
 			seq_printf(seq, " <PCI video>");
@@ -1256,7 +1256,7 @@
 {
 	struct acpi_video_bus *video = seq->private;
 	int status;
-	unsigned long id;
+	unsigned long long id;
 
 
 	if (!video)
@@ -1303,7 +1303,7 @@
 	struct seq_file *m = file->private_data;
 	struct acpi_video_bus *video = m->private;
 	char str[12] = { 0 };
-	unsigned long opt, options;
+	unsigned long long opt, options;
 
 
 	if (!video || count + 1 > sizeof str)
@@ -1473,7 +1473,7 @@
 acpi_video_bus_get_one_device(struct acpi_device *device,
 			      struct acpi_video_bus *video)
 {
-	unsigned long device_id;
+	unsigned long long device_id;
 	int status;
 	struct acpi_video_device *data;
 	struct acpi_video_device_attrib* attribute;
@@ -1491,7 +1491,7 @@
 
 		strcpy(acpi_device_name(device), ACPI_VIDEO_DEVICE_NAME);
 		strcpy(acpi_device_class(device), ACPI_VIDEO_CLASS);
-		acpi_driver_data(device) = data;
+		device->driver_data = data;
 
 		data->device_id = device_id;
 		data->video = video;
@@ -1530,8 +1530,8 @@
 						     acpi_video_device_notify,
 						     data);
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-					  "Error installing notify handler\n"));
+			printk(KERN_ERR PREFIX
+					  "Error installing notify handler\n");
 			if(data->brightness)
 				kfree(data->brightness->levels);
 			kfree(data->brightness);
@@ -1724,7 +1724,7 @@
 static void
 acpi_video_switch_brightness(struct acpi_video_device *device, int event)
 {
-	unsigned long level_current, level_next;
+	unsigned long long level_current, level_next;
 	if (!device->brightness)
 		return;
 	acpi_video_device_lcd_get_level_current(device, &level_current);
@@ -1745,8 +1745,8 @@
 
 		status = acpi_video_bus_get_one_device(dev, video);
 		if (ACPI_FAILURE(status)) {
-			ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-					"Cant attach device"));
+			printk(KERN_WARNING PREFIX
+					"Cant attach device");
 			continue;
 		}
 	}
@@ -1982,7 +1982,7 @@
 	video->device = device;
 	strcpy(acpi_device_name(device), ACPI_VIDEO_BUS_NAME);
 	strcpy(acpi_device_class(device), ACPI_VIDEO_CLASS);
-	acpi_driver_data(device) = video;
+	device->driver_data = video;
 
 	acpi_video_bus_find_cap(video);
 	error = acpi_video_bus_check(video);
@@ -2003,8 +2003,8 @@
 					     ACPI_DEVICE_NOTIFY,
 					     acpi_video_bus_notify, video);
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-				  "Error installing notify handler\n"));
+		printk(KERN_ERR PREFIX
+				  "Error installing notify handler\n");
 		error = -ENODEV;
 		goto err_stop_video;
 	}
@@ -2058,7 +2058,7 @@
 	acpi_video_bus_remove_fs(device);
  err_free_video:
 	kfree(video);
-	acpi_driver_data(device) = NULL;
+	device->driver_data = NULL;
 
 	return error;
 }
diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c
index cfe2c83..47cd7ba 100644
--- a/drivers/acpi/wmi.c
+++ b/drivers/acpi/wmi.c
@@ -217,6 +217,35 @@
 	return 0;
 }
 
+static acpi_status wmi_method_enable(struct wmi_block *wblock, int enable)
+{
+	struct guid_block *block = NULL;
+	char method[5];
+	struct acpi_object_list input;
+	union acpi_object params[1];
+	acpi_status status;
+	acpi_handle handle;
+
+	block = &wblock->gblock;
+	handle = wblock->handle;
+
+	if (!block)
+		return AE_NOT_EXIST;
+
+	input.count = 1;
+	input.pointer = params;
+	params[0].type = ACPI_TYPE_INTEGER;
+	params[0].integer.value = enable;
+
+	snprintf(method, 5, "WE%02X", block->notify_id);
+	status = acpi_evaluate_object(handle, method, &input, NULL);
+
+	if (status != AE_OK && status != AE_NOT_FOUND)
+		return status;
+	else
+		return AE_OK;
+}
+
 /*
  * Exported WMI functions
  */
@@ -242,7 +271,7 @@
 	char method[4] = "WM";
 
 	if (!find_guid(guid_string, &wblock))
-		return AE_BAD_ADDRESS;
+		return AE_ERROR;
 
 	block = &wblock->gblock;
 	handle = wblock->handle;
@@ -304,7 +333,7 @@
 		return AE_BAD_PARAMETER;
 
 	if (!find_guid(guid_string, &wblock))
-		return AE_BAD_ADDRESS;
+		return AE_ERROR;
 
 	block = &wblock->gblock;
 	handle = wblock->handle;
@@ -314,7 +343,7 @@
 
 	/* Check GUID is a data block */
 	if (block->flags & (ACPI_WMI_EVENT | ACPI_WMI_METHOD))
-		return AE_BAD_ADDRESS;
+		return AE_ERROR;
 
 	input.count = 1;
 	input.pointer = wq_params;
@@ -385,7 +414,7 @@
 		return AE_BAD_DATA;
 
 	if (!find_guid(guid_string, &wblock))
-		return AE_BAD_ADDRESS;
+		return AE_ERROR;
 
 	block = &wblock->gblock;
 	handle = wblock->handle;
@@ -395,7 +424,7 @@
 
 	/* Check GUID is a data block */
 	if (block->flags & (ACPI_WMI_EVENT | ACPI_WMI_METHOD))
-		return AE_BAD_ADDRESS;
+		return AE_ERROR;
 
 	input.count = 2;
 	input.pointer = params;
@@ -427,6 +456,7 @@
 wmi_notify_handler handler, void *data)
 {
 	struct wmi_block *block;
+	acpi_status status;
 
 	if (!guid || !handler)
 		return AE_BAD_PARAMETER;
@@ -441,7 +471,9 @@
 	block->handler = handler;
 	block->handler_data = data;
 
-	return AE_OK;
+	status = wmi_method_enable(block, 1);
+
+	return status;
 }
 EXPORT_SYMBOL_GPL(wmi_install_notify_handler);
 
@@ -453,6 +485,7 @@
 acpi_status wmi_remove_notify_handler(const char *guid)
 {
 	struct wmi_block *block;
+	acpi_status status;
 
 	if (!guid)
 		return AE_BAD_PARAMETER;
@@ -464,10 +497,12 @@
 	if (!block->handler)
 		return AE_NULL_ENTRY;
 
+	status = wmi_method_enable(block, 0);
+
 	block->handler = NULL;
 	block->handler_data = NULL;
 
-	return AE_OK;
+	return status;
 }
 EXPORT_SYMBOL_GPL(wmi_remove_notify_handler);
 
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 9330b79..c012307 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -120,21 +120,6 @@
 		ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
 }
 
-static void ata_acpi_eject_device(acpi_handle handle)
-{
-	struct acpi_object_list arg_list;
-	union acpi_object arg;
-
-	arg_list.count = 1;
-	arg_list.pointer = &arg;
-	arg.type = ACPI_TYPE_INTEGER;
-	arg.integer.value = 1;
-
-	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_EJ0",
-					      &arg_list, NULL)))
-		printk(KERN_ERR "Failed to evaluate _EJ0!\n");
-}
-
 /* @ap and @dev are the same as ata_acpi_handle_hotplug() */
 static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev)
 {
@@ -157,7 +142,6 @@
  * @ap: ATA port ACPI event occurred
  * @dev: ATA device ACPI event occurred (can be NULL)
  * @event: ACPI event which occurred
- * @is_dock_event: boolean indicating whether the event was a dock one
  *
  * All ACPI bay / device realted events end up in this function.  If
  * the event is port-wide @dev is NULL.  If the event is specific to a
@@ -171,116 +155,99 @@
  * ACPI notify handler context.  May sleep.
  */
 static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
-				    u32 event, int is_dock_event)
+				    u32 event)
 {
-	char event_string[12];
-	char *envp[] = { event_string, NULL };
 	struct ata_eh_info *ehi = &ap->link.eh_info;
-	struct kobject *kobj = NULL;
 	int wait = 0;
 	unsigned long flags;
-	acpi_handle handle, tmphandle;
-	unsigned long sta;
-	acpi_status status;
+	acpi_handle handle;
 
-	if (dev) {
-		if (dev->sdev)
-			kobj = &dev->sdev->sdev_gendev.kobj;
+	if (dev)
 		handle = dev->acpi_handle;
-	} else {
-		kobj = &ap->dev->kobj;
+	else
 		handle = ap->acpi_handle;
-	}
-
-	status = acpi_get_handle(handle, "_EJ0", &tmphandle);
-	if (ACPI_FAILURE(status))
-		/* This device does not support hotplug */
-		return;
-
-	if (event == ACPI_NOTIFY_BUS_CHECK ||
-	    event == ACPI_NOTIFY_DEVICE_CHECK)
-		status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
 
 	spin_lock_irqsave(ap->lock, flags);
-
+	/*
+	 * When dock driver calls into the routine, it will always use
+	 * ACPI_NOTIFY_BUS_CHECK/ACPI_NOTIFY_DEVICE_CHECK for add and
+	 * ACPI_NOTIFY_EJECT_REQUEST for remove
+	 */
 	switch (event) {
 	case ACPI_NOTIFY_BUS_CHECK:
 	case ACPI_NOTIFY_DEVICE_CHECK:
 		ata_ehi_push_desc(ehi, "ACPI event");
 
-		if (ACPI_FAILURE(status)) {
-			ata_port_printk(ap, KERN_ERR,
-				"acpi: failed to determine bay status (0x%x)\n",
-				status);
-			break;
-		}
-
-		if (sta) {
-			ata_ehi_hotplugged(ehi);
-			ata_port_freeze(ap);
-		} else {
-			/* The device has gone - unplug it */
-			ata_acpi_detach_device(ap, dev);
-			wait = 1;
-		}
+		ata_ehi_hotplugged(ehi);
+		ata_port_freeze(ap);
 		break;
 	case ACPI_NOTIFY_EJECT_REQUEST:
 		ata_ehi_push_desc(ehi, "ACPI event");
 
-		if (!is_dock_event)
-			break;
-
-		/* undock event - immediate unplug */
 		ata_acpi_detach_device(ap, dev);
 		wait = 1;
 		break;
 	}
 
-	/* make sure kobj doesn't go away while ap->lock is released */
-	kobject_get(kobj);
-
 	spin_unlock_irqrestore(ap->lock, flags);
 
-	if (wait) {
+	if (wait)
 		ata_port_wait_eh(ap);
-		ata_acpi_eject_device(handle);
-	}
-
-	if (kobj && !is_dock_event) {
-		sprintf(event_string, "BAY_EVENT=%d", event);
-		kobject_uevent_env(kobj, KOBJ_CHANGE, envp);
-	}
-
-	kobject_put(kobj);
 }
 
 static void ata_acpi_dev_notify_dock(acpi_handle handle, u32 event, void *data)
 {
 	struct ata_device *dev = data;
 
-	ata_acpi_handle_hotplug(dev->link->ap, dev, event, 1);
+	ata_acpi_handle_hotplug(dev->link->ap, dev, event);
 }
 
 static void ata_acpi_ap_notify_dock(acpi_handle handle, u32 event, void *data)
 {
 	struct ata_port *ap = data;
 
-	ata_acpi_handle_hotplug(ap, NULL, event, 1);
+	ata_acpi_handle_hotplug(ap, NULL, event);
 }
 
-static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data)
+static void ata_acpi_uevent(struct ata_port *ap, struct ata_device *dev,
+	u32 event)
+{
+	struct kobject *kobj = NULL;
+	char event_string[20];
+	char *envp[] = { event_string, NULL };
+
+	if (dev) {
+		if (dev->sdev)
+			kobj = &dev->sdev->sdev_gendev.kobj;
+	} else
+		kobj = &ap->dev->kobj;
+
+	if (kobj) {
+		snprintf(event_string, 20, "BAY_EVENT=%d", event);
+		kobject_uevent_env(kobj, KOBJ_CHANGE, envp);
+	}
+}
+
+static void ata_acpi_ap_uevent(acpi_handle handle, u32 event, void *data)
+{
+	ata_acpi_uevent(data, NULL, event);
+}
+
+static void ata_acpi_dev_uevent(acpi_handle handle, u32 event, void *data)
 {
 	struct ata_device *dev = data;
-
-	ata_acpi_handle_hotplug(dev->link->ap, dev, event, 0);
+	ata_acpi_uevent(dev->link->ap, dev, event);
 }
 
-static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data)
-{
-	struct ata_port *ap = data;
+static struct acpi_dock_ops ata_acpi_dev_dock_ops = {
+	.handler = ata_acpi_dev_notify_dock,
+	.uevent = ata_acpi_dev_uevent,
+};
 
-	ata_acpi_handle_hotplug(ap, NULL, event, 0);
-}
+static struct acpi_dock_ops ata_acpi_ap_dock_ops = {
+	.handler = ata_acpi_ap_notify_dock,
+	.uevent = ata_acpi_ap_uevent,
+};
 
 /**
  * ata_acpi_associate - associate ATA host with ACPI objects
@@ -315,24 +282,18 @@
 			ata_acpi_associate_ide_port(ap);
 
 		if (ap->acpi_handle) {
-			acpi_install_notify_handler(ap->acpi_handle,
-						    ACPI_SYSTEM_NOTIFY,
-						    ata_acpi_ap_notify, ap);
 			/* we might be on a docking station */
 			register_hotplug_dock_device(ap->acpi_handle,
-					     ata_acpi_ap_notify_dock, ap);
+					     &ata_acpi_ap_dock_ops, ap);
 		}
 
 		for (j = 0; j < ata_link_max_devices(&ap->link); j++) {
 			struct ata_device *dev = &ap->link.device[j];
 
 			if (dev->acpi_handle) {
-				acpi_install_notify_handler(dev->acpi_handle,
-						ACPI_SYSTEM_NOTIFY,
-						ata_acpi_dev_notify, dev);
 				/* we might be on a docking station */
 				register_hotplug_dock_device(dev->acpi_handle,
-					     ata_acpi_dev_notify_dock, dev);
+					     &ata_acpi_dev_dock_ops, dev);
 			}
 		}
 	}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 1ee9499..8cb0b36 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1713,8 +1713,6 @@
 	else
 		tag = 0;
 
-	if (test_and_set_bit(tag, &ap->qc_allocated))
-		BUG();
 	qc = __ata_qc_from_tag(ap, tag);
 
 	qc->tag = tag;
@@ -4553,37 +4551,6 @@
 }
 
 /**
- *	ata_qc_new - Request an available ATA command, for queueing
- *	@ap: Port associated with device @dev
- *	@dev: Device from whom we request an available command structure
- *
- *	LOCKING:
- *	None.
- */
-
-static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
-{
-	struct ata_queued_cmd *qc = NULL;
-	unsigned int i;
-
-	/* no command while frozen */
-	if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
-		return NULL;
-
-	/* the last tag is reserved for internal command. */
-	for (i = 0; i < ATA_MAX_QUEUE - 1; i++)
-		if (!test_and_set_bit(i, &ap->qc_allocated)) {
-			qc = __ata_qc_from_tag(ap, i);
-			break;
-		}
-
-	if (qc)
-		qc->tag = i;
-
-	return qc;
-}
-
-/**
  *	ata_qc_new_init - Request an available ATA command, and initialize it
  *	@dev: Device from whom we request an available command structure
  *
@@ -4591,16 +4558,20 @@
  *	None.
  */
 
-struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev)
+struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag)
 {
 	struct ata_port *ap = dev->link->ap;
 	struct ata_queued_cmd *qc;
 
-	qc = ata_qc_new(ap);
+	if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
+		return NULL;
+
+	qc = __ata_qc_from_tag(ap, tag);
 	if (qc) {
 		qc->scsicmd = NULL;
 		qc->ap = ap;
 		qc->dev = dev;
+		qc->tag = tag;
 
 		ata_qc_reinit(qc);
 	}
@@ -4608,31 +4579,6 @@
 	return qc;
 }
 
-/**
- *	ata_qc_free - free unused ata_queued_cmd
- *	@qc: Command to complete
- *
- *	Designed to free unused ata_queued_cmd object
- *	in case something prevents using it.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-void ata_qc_free(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	unsigned int tag;
-
-	WARN_ON(qc == NULL);	/* ata_qc_from_tag _might_ return NULL */
-
-	qc->flags = 0;
-	tag = qc->tag;
-	if (likely(ata_tag_valid(tag))) {
-		qc->tag = ATA_TAG_POISON;
-		clear_bit(tag, &ap->qc_allocated);
-	}
-}
-
 void __ata_qc_complete(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
@@ -5373,6 +5319,8 @@
 
 #ifdef CONFIG_ATA_SFF
 	INIT_DELAYED_WORK(&ap->port_task, ata_pio_task);
+#else
+	INIT_DELAYED_WORK(&ap->port_task, NULL);
 #endif
 	INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
 	INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index a93247c..5d687d7 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1206,7 +1206,10 @@
 
 	ata_eh_clear_action(link, dev, ehi, action);
 
-	if (!(ehc->i.flags & ATA_EHI_QUIET))
+	/* About to take EH action, set RECOVERED.  Ignore actions on
+	 * slave links as master will do them again.
+	 */
+	if (!(ehc->i.flags & ATA_EHI_QUIET) && link != ap->slave_link)
 		ap->pflags |= ATA_PFLAG_RECOVERED;
 
 	spin_unlock_irqrestore(ap->lock, flags);
@@ -2010,8 +2013,13 @@
 		struct ata_eh_context *mehc = &ap->link.eh_context;
 		struct ata_eh_context *sehc = &ap->slave_link->eh_context;
 
+		/* transfer control flags from master to slave */
+		sehc->i.flags |= mehc->i.flags & ATA_EHI_TO_SLAVE_MASK;
+
+		/* perform autopsy on the slave link */
 		ata_eh_link_autopsy(ap->slave_link);
 
+		/* transfer actions from slave to master and clear slave */
 		ata_eh_about_to_do(ap->slave_link, NULL, ATA_EH_ALL_ACTIONS);
 		mehc->i.action		|= sehc->i.action;
 		mehc->i.dev_action[1]	|= sehc->i.dev_action[1];
@@ -2447,14 +2455,14 @@
 		dev->pio_mode = XFER_PIO_0;
 		dev->flags &= ~ATA_DFLAG_SLEEPING;
 
-		if (ata_phys_link_offline(ata_dev_phys_link(dev)))
-			continue;
-
-		/* apply class override */
-		if (lflags & ATA_LFLAG_ASSUME_ATA)
-			classes[dev->devno] = ATA_DEV_ATA;
-		else if (lflags & ATA_LFLAG_ASSUME_SEMB)
-			classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */
+		if (!ata_phys_link_offline(ata_dev_phys_link(dev))) {
+			/* apply class override */
+			if (lflags & ATA_LFLAG_ASSUME_ATA)
+				classes[dev->devno] = ATA_DEV_ATA;
+			else if (lflags & ATA_LFLAG_ASSUME_SEMB)
+				classes[dev->devno] = ATA_DEV_SEMB_UNSUP;
+		} else
+			classes[dev->devno] = ATA_DEV_NONE;
 	}
 
 	/* record current link speed */
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 5d312dc..4b95c43 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -708,7 +708,11 @@
 {
 	struct ata_queued_cmd *qc;
 
-	qc = ata_qc_new_init(dev);
+	if (cmd->request->tag != -1)
+		qc = ata_qc_new_init(dev, cmd->request->tag);
+	else
+		qc = ata_qc_new_init(dev, 0);
+
 	if (qc) {
 		qc->scsicmd = cmd;
 		qc->scsidone = done;
@@ -1103,7 +1107,8 @@
 
 		depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id));
 		depth = min(ATA_MAX_QUEUE - 1, depth);
-		scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth);
+		scsi_set_tag_type(sdev, MSG_SIMPLE_TAG);
+		scsi_activate_tcq(sdev, depth);
 	}
 
 	return 0;
@@ -1943,6 +1948,11 @@
 		hdr[1] |= (1 << 7);
 
 	memcpy(rbuf, hdr, sizeof(hdr));
+
+	/* if ncq, set tags supported */
+	if (ata_id_has_ncq(args->id))
+		rbuf[7] |= (1 << 1);
+
 	memcpy(&rbuf[8], "ATA     ", 8);
 	ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16);
 	ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV, 4);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 2a4c516..4b47394 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2153,8 +2153,17 @@
  */
 void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc)
 {
-	if (qc->ap->ioaddr.bmdma_addr)
+	struct ata_port *ap = qc->ap;
+	unsigned long flags;
+
+	spin_lock_irqsave(ap->lock, flags);
+
+	ap->hsm_task_state = HSM_ST_IDLE;
+
+	if (ap->ioaddr.bmdma_addr)
 		ata_bmdma_stop(qc);
+
+	spin_unlock_irqrestore(ap->lock, flags);
 }
 
 /**
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index fe2839e..d3831d3 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -74,7 +74,7 @@
 extern void ata_force_cbl(struct ata_port *ap);
 extern u64 ata_tf_to_lba(const struct ata_taskfile *tf);
 extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf);
-extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
+extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag);
 extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
 			   u64 block, u32 n_block, unsigned int tf_flags,
 			   unsigned int tag);
@@ -103,7 +103,6 @@
 extern int sata_down_spd_limit(struct ata_link *link);
 extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
 extern void ata_sg_clean(struct ata_queued_cmd *qc);
-extern void ata_qc_free(struct ata_queued_cmd *qc);
 extern void ata_qc_issue(struct ata_queued_cmd *qc);
 extern void __ata_qc_complete(struct ata_queued_cmd *qc);
 extern int atapi_check_dma(struct ata_queued_cmd *qc);
@@ -119,6 +118,22 @@
 extern void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy);
 extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm);
 
+/**
+ *	ata_qc_free - free unused ata_queued_cmd
+ *	@qc: Command to complete
+ *
+ *	Designed to free unused ata_queued_cmd object
+ *	in case something prevents using it.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+static inline void ata_qc_free(struct ata_queued_cmd *qc)
+{
+	qc->flags = 0;
+	qc->tag = ATA_TAG_POISON;
+}
+
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
 extern void ata_acpi_associate_sata_port(struct ata_port *ap);
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 1cfa745..5b72e73 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -70,6 +70,7 @@
 static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
 static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
+static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
 static void svia_noop_freeze(struct ata_port *ap);
 static int vt6420_prereset(struct ata_link *link, unsigned long deadline);
 static int vt6421_pata_cable_detect(struct ata_port *ap);
@@ -103,21 +104,26 @@
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static struct ata_port_operations vt6420_sata_ops = {
+static struct ata_port_operations svia_base_ops = {
 	.inherits		= &ata_bmdma_port_ops,
+	.sff_tf_load		= svia_tf_load,
+};
+
+static struct ata_port_operations vt6420_sata_ops = {
+	.inherits		= &svia_base_ops,
 	.freeze			= svia_noop_freeze,
 	.prereset		= vt6420_prereset,
 };
 
 static struct ata_port_operations vt6421_pata_ops = {
-	.inherits		= &ata_bmdma_port_ops,
+	.inherits		= &svia_base_ops,
 	.cable_detect		= vt6421_pata_cable_detect,
 	.set_piomode		= vt6421_set_pio_mode,
 	.set_dmamode		= vt6421_set_dma_mode,
 };
 
 static struct ata_port_operations vt6421_sata_ops = {
-	.inherits		= &ata_bmdma_port_ops,
+	.inherits		= &svia_base_ops,
 	.scr_read		= svia_scr_read,
 	.scr_write		= svia_scr_write,
 };
@@ -168,6 +174,29 @@
 	return 0;
 }
 
+/**
+ *	svia_tf_load - send taskfile registers to host controller
+ *	@ap: Port to which output is sent
+ *	@tf: ATA taskfile register set
+ *
+ *	Outputs ATA taskfile to standard ATA host controller.
+ *
+ *	This is to fix the internal bug of via chipsets, which will
+ *	reset the device register after changing the IEN bit on ctl
+ *	register.
+ */
+static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+	struct ata_taskfile ttf;
+
+	if (tf->ctl != ap->last_ctl)  {
+		ttf = *tf;
+		ttf.flags |= ATA_TFLAG_DEVICE;
+		tf = &ttf;
+	}
+	ata_sff_tf_load(ap, tf);
+}
+
 static void svia_noop_freeze(struct ata_port *ap)
 {
 	/* Some VIA controllers choke if ATA_NIEN is manipulated in
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index a002a38..f6a337c 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -72,9 +72,9 @@
 	}
 }
 
-static int DAC960_open(struct inode *inode, struct file *file)
+static int DAC960_open(struct block_device *bdev, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
+	struct gendisk *disk = bdev->bd_disk;
 	DAC960_Controller_T *p = disk->queue->queuedata;
 	int drive_nr = (long)disk->private_data;
 
@@ -89,7 +89,7 @@
 			return -ENXIO;
 	}
 
-	check_disk_change(inode->i_bdev);
+	check_disk_change(bdev);
 
 	if (!get_capacity(p->disks[drive_nr]))
 		return -ENXIO;
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 7516baff..4b1d4ac 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1437,10 +1437,11 @@
 	return 0;
 }
 
-static int fd_ioctl(struct inode *inode, struct file *filp,
+static int fd_ioctl(struct block_device *bdev, fmode_t mode,
 		    unsigned int cmd, unsigned long param)
 {
-	int drive = iminor(inode) & 3;
+	struct amiga_floppy_struct *p = bdev->bd_disk->private_data;
+	int drive = p - unit;
 	static struct floppy_struct getprm;
 	void __user *argp = (void __user *)param;
 
@@ -1451,7 +1452,7 @@
 			rel_fdc();
 			return -EBUSY;
 		}
-		fsync_bdev(inode->i_bdev);
+		fsync_bdev(bdev);
 		if (fd_motor_on(drive) == 0) {
 			rel_fdc();
 			return -ENODEV;
@@ -1464,12 +1465,12 @@
 		rel_fdc();
 		break;
 	case FDFMTTRK:
-		if (param < unit[drive].type->tracks * unit[drive].type->heads)
+		if (param < p->type->tracks * p->type->heads)
 		{
 			get_fdc(drive);
 			if (fd_seek(drive,param) != 0){
-				memset(unit[drive].trackbuf, FD_FILL_BYTE,
-				       unit[drive].dtype->sects * unit[drive].type->sect_mult * 512);
+				memset(p->trackbuf, FD_FILL_BYTE,
+				       p->dtype->sects * p->type->sect_mult * 512);
 				non_int_flush_track(drive);
 			}
 			floppy_off(drive);
@@ -1480,14 +1481,14 @@
 		break;
 	case FDFMTEND:
 		floppy_off(drive);
-		invalidate_bdev(inode->i_bdev);
+		invalidate_bdev(bdev);
 		break;
 	case FDGETPRM:
 		memset((void *)&getprm, 0, sizeof (getprm));
-		getprm.track=unit[drive].type->tracks;
-		getprm.head=unit[drive].type->heads;
-		getprm.sect=unit[drive].dtype->sects * unit[drive].type->sect_mult;
-		getprm.size=unit[drive].blocks;
+		getprm.track=p->type->tracks;
+		getprm.head=p->type->heads;
+		getprm.sect=p->dtype->sects * p->type->sect_mult;
+		getprm.size=p->blocks;
 		if (copy_to_user(argp, &getprm, sizeof(struct floppy_struct)))
 			return -EFAULT;
 		break;
@@ -1500,10 +1501,10 @@
 		break;
 #ifdef RAW_IOCTL
 	case IOCTL_RAW_TRACK:
-		if (copy_to_user(argp, raw_buf, unit[drive].type->read_size))
+		if (copy_to_user(argp, raw_buf, p->type->read_size))
 			return -EFAULT;
 		else
-			return unit[drive].type->read_size;
+			return p->type->read_size;
 #endif
 	default:
 		printk(KERN_DEBUG "fd_ioctl: unknown cmd %d for drive %d.",
@@ -1548,10 +1549,10 @@
  * /dev/PS0 etc), and disallows simultaneous access to the same
  * drive with different device numbers.
  */
-static int floppy_open(struct inode *inode, struct file *filp)
+static int floppy_open(struct block_device *bdev, fmode_t mode)
 {
-	int drive = iminor(inode) & 3;
-	int system =  (iminor(inode) & 4) >> 2;
+	int drive = MINOR(bdev->bd_dev) & 3;
+	int system =  (MINOR(bdev->bd_dev) & 4) >> 2;
 	int old_dev;
 	unsigned long flags;
 
@@ -1560,9 +1561,9 @@
 	if (fd_ref[drive] && old_dev != system)
 		return -EBUSY;
 
-	if (filp && filp->f_mode & 3) {
-		check_disk_change(inode->i_bdev);
-		if (filp->f_mode & 2 ) {
+	if (mode & (FMODE_READ|FMODE_WRITE)) {
+		check_disk_change(bdev);
+		if (mode & FMODE_WRITE) {
 			int wrprot;
 
 			get_fdc(drive);
@@ -1592,9 +1593,10 @@
 	return 0;
 }
 
-static int floppy_release(struct inode * inode, struct file * filp)
+static int floppy_release(struct gendisk *disk, fmode_t mode)
 {
-	int drive = iminor(inode) & 3;
+	struct amiga_floppy_struct *p = disk->private_data;
+	int drive = p - unit;
 
 	if (unit[drive].dirty == 1) {
 		del_timer (flush_track_timer + drive);
@@ -1650,7 +1652,7 @@
 	.owner		= THIS_MODULE,
 	.open		= floppy_open,
 	.release	= floppy_release,
-	.ioctl		= fd_ioctl,
+	.locked_ioctl	= fd_ioctl,
 	.getgeo		= fd_getgeo,
 	.media_changed	= amiga_floppy_change,
 };
diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c
index d876ad8..1747dd2 100644
--- a/drivers/block/aoe/aoeblk.c
+++ b/drivers/block/aoe/aoeblk.c
@@ -118,13 +118,11 @@
 }
 
 static int
-aoeblk_open(struct inode *inode, struct file *filp)
+aoeblk_open(struct block_device *bdev, fmode_t mode)
 {
-	struct aoedev *d;
+	struct aoedev *d = bdev->bd_disk->private_data;
 	ulong flags;
 
-	d = inode->i_bdev->bd_disk->private_data;
-
 	spin_lock_irqsave(&d->lock, flags);
 	if (d->flags & DEVFL_UP) {
 		d->nopen++;
@@ -136,13 +134,11 @@
 }
 
 static int
-aoeblk_release(struct inode *inode, struct file *filp)
+aoeblk_release(struct gendisk *disk, fmode_t mode)
 {
-	struct aoedev *d;
+	struct aoedev *d = disk->private_data;
 	ulong flags;
 
-	d = inode->i_bdev->bd_disk->private_data;
-
 	spin_lock_irqsave(&d->lock, flags);
 
 	if (--d->nopen == 0) {
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 432cf40..69e1df7 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -361,13 +361,13 @@
 static void finish_fdc_done( int dummy );
 static void setup_req_params( int drive );
 static void redo_fd_request( void);
-static int fd_ioctl( struct inode *inode, struct file *filp, unsigned int
+static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int
                      cmd, unsigned long param);
 static void fd_probe( int drive );
 static int fd_test_drive_present( int drive );
 static void config_types( void );
-static int floppy_open( struct inode *inode, struct file *filp );
-static int floppy_release( struct inode * inode, struct file * filp );
+static int floppy_open(struct block_device *bdev, fmode_t mode);
+static int floppy_release(struct gendisk *disk, fmode_t mode);
 
 /************************* End of Prototypes **************************/
 
@@ -1483,10 +1483,10 @@
 	atari_enable_irq( IRQ_MFP_FDC );
 }
 
-static int fd_ioctl(struct inode *inode, struct file *filp,
+static int fd_ioctl(struct block_device *bdev, fmode_t mode,
 		    unsigned int cmd, unsigned long param)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
+	struct gendisk *disk = bdev->bd_disk;
 	struct atari_floppy_struct *floppy = disk->private_data;
 	int drive = floppy - unit;
 	int type = floppy->type;
@@ -1661,7 +1661,7 @@
 		/* invalidate the buffer track to force a reread */
 		BufferDrive = -1;
 		set_bit(drive, &fake_change);
-		check_disk_change(inode->i_bdev);
+		check_disk_change(bdev);
 		return 0;
 	default:
 		return -EINVAL;
@@ -1804,37 +1804,36 @@
  * drive with different device numbers.
  */
 
-static int floppy_open( struct inode *inode, struct file *filp )
+static int floppy_open(struct block_device *bdev, fmode_t mode)
 {
-	struct atari_floppy_struct *p = inode->i_bdev->bd_disk->private_data;
-	int type  = iminor(inode) >> 2;
+	struct atari_floppy_struct *p = bdev->bd_disk->private_data;
+	int type  = MINOR(bdev->bd_dev) >> 2;
 
 	DPRINT(("fd_open: type=%d\n",type));
 	if (p->ref && p->type != type)
 		return -EBUSY;
 
-	if (p->ref == -1 || (p->ref && filp->f_flags & O_EXCL))
+	if (p->ref == -1 || (p->ref && mode & FMODE_EXCL))
 		return -EBUSY;
 
-	if (filp->f_flags & O_EXCL)
+	if (mode & FMODE_EXCL)
 		p->ref = -1;
 	else
 		p->ref++;
 
 	p->type = type;
 
-	if (filp->f_flags & O_NDELAY)
+	if (mode & FMODE_NDELAY)
 		return 0;
 
-	if (filp->f_mode & 3) {
-		check_disk_change(inode->i_bdev);
-		if (filp->f_mode & 2) {
+	if (mode & (FMODE_READ|FMODE_WRITE)) {
+		check_disk_change(bdev);
+		if (mode & FMODE_WRITE) {
 			if (p->wpstat) {
 				if (p->ref < 0)
 					p->ref = 0;
 				else
 					p->ref--;
-				floppy_release(inode, filp);
 				return -EROFS;
 			}
 		}
@@ -1843,9 +1842,9 @@
 }
 
 
-static int floppy_release( struct inode * inode, struct file * filp )
+static int floppy_release(struct gendisk *disk, fmode_t mode)
 {
-	struct atari_floppy_struct *p = inode->i_bdev->bd_disk->private_data;
+	struct atari_floppy_struct *p = disk->private_data;
 	if (p->ref < 0)
 		p->ref = 0;
 	else if (!p->ref--) {
@@ -1859,7 +1858,7 @@
 	.owner		= THIS_MODULE,
 	.open		= floppy_open,
 	.release	= floppy_release,
-	.ioctl		= fd_ioctl,
+	.locked_ioctl	= fd_ioctl,
 	.media_changed	= check_floppy_change,
 	.revalidate_disk= floppy_revalidate,
 };
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index d070d49..bdd4f5f 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -340,11 +340,10 @@
 }
 #endif
 
-static int brd_ioctl(struct inode *inode, struct file *file,
+static int brd_ioctl(struct block_device *bdev, fmode_t mode,
 			unsigned int cmd, unsigned long arg)
 {
 	int error;
-	struct block_device *bdev = inode->i_bdev;
 	struct brd_device *brd = bdev->bd_disk->private_data;
 
 	if (cmd != BLKFLSBUF)
@@ -376,7 +375,7 @@
 
 static struct block_device_operations brd_fops = {
 	.owner =		THIS_MODULE,
-	.ioctl =		brd_ioctl,
+	.locked_ioctl =		brd_ioctl,
 #ifdef CONFIG_BLK_DEV_XIP
 	.direct_access =	brd_direct_access,
 #endif
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 1e1f915..4023885 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -152,9 +152,9 @@
 
 static void do_cciss_request(struct request_queue *q);
 static irqreturn_t do_cciss_intr(int irq, void *dev_id);
-static int cciss_open(struct inode *inode, struct file *filep);
-static int cciss_release(struct inode *inode, struct file *filep);
-static int cciss_ioctl(struct inode *inode, struct file *filep,
+static int cciss_open(struct block_device *bdev, fmode_t mode);
+static int cciss_release(struct gendisk *disk, fmode_t mode);
+static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
 		       unsigned int cmd, unsigned long arg);
 static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 
@@ -192,14 +192,15 @@
 #endif				/* CONFIG_PROC_FS */
 
 #ifdef CONFIG_COMPAT
-static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg);
+static int cciss_compat_ioctl(struct block_device *, fmode_t,
+			      unsigned, unsigned long);
 #endif
 
 static struct block_device_operations cciss_fops = {
 	.owner = THIS_MODULE,
 	.open = cciss_open,
 	.release = cciss_release,
-	.ioctl = cciss_ioctl,
+	.locked_ioctl = cciss_ioctl,
 	.getgeo = cciss_getgeo,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl = cciss_compat_ioctl,
@@ -547,13 +548,13 @@
 /*
  * Open.  Make sure the device is really there.
  */
-static int cciss_open(struct inode *inode, struct file *filep)
+static int cciss_open(struct block_device *bdev, fmode_t mode)
 {
-	ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
-	drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk);
+	ctlr_info_t *host = get_host(bdev->bd_disk);
+	drive_info_struct *drv = get_drv(bdev->bd_disk);
 
 #ifdef CCISS_DEBUG
-	printk(KERN_DEBUG "cciss_open %s\n", inode->i_bdev->bd_disk->disk_name);
+	printk(KERN_DEBUG "cciss_open %s\n", bdev->bd_disk->disk_name);
 #endif				/* CCISS_DEBUG */
 
 	if (host->busy_initializing || drv->busy_configuring)
@@ -567,9 +568,9 @@
 	 * for "raw controller".
 	 */
 	if (drv->heads == 0) {
-		if (iminor(inode) != 0) {	/* not node 0? */
+		if (MINOR(bdev->bd_dev) != 0) {	/* not node 0? */
 			/* if not node 0 make sure it is a partition = 0 */
-			if (iminor(inode) & 0x0f) {
+			if (MINOR(bdev->bd_dev) & 0x0f) {
 				return -ENXIO;
 				/* if it is, make sure we have a LUN ID */
 			} else if (drv->LunID == 0) {
@@ -587,14 +588,13 @@
 /*
  * Close.  Sync first.
  */
-static int cciss_release(struct inode *inode, struct file *filep)
+static int cciss_release(struct gendisk *disk, fmode_t mode)
 {
-	ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
-	drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk);
+	ctlr_info_t *host = get_host(disk);
+	drive_info_struct *drv = get_drv(disk);
 
 #ifdef CCISS_DEBUG
-	printk(KERN_DEBUG "cciss_release %s\n",
-	       inode->i_bdev->bd_disk->disk_name);
+	printk(KERN_DEBUG "cciss_release %s\n", disk->disk_name);
 #endif				/* CCISS_DEBUG */
 
 	drv->usage_count--;
@@ -604,21 +604,23 @@
 
 #ifdef CONFIG_COMPAT
 
-static int do_ioctl(struct file *f, unsigned cmd, unsigned long arg)
+static int do_ioctl(struct block_device *bdev, fmode_t mode,
+		    unsigned cmd, unsigned long arg)
 {
 	int ret;
 	lock_kernel();
-	ret = cciss_ioctl(f->f_path.dentry->d_inode, f, cmd, arg);
+	ret = cciss_ioctl(bdev, mode, cmd, arg);
 	unlock_kernel();
 	return ret;
 }
 
-static int cciss_ioctl32_passthru(struct file *f, unsigned cmd,
-				  unsigned long arg);
-static int cciss_ioctl32_big_passthru(struct file *f, unsigned cmd,
-				      unsigned long arg);
+static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode,
+				  unsigned cmd, unsigned long arg);
+static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode,
+				      unsigned cmd, unsigned long arg);
 
-static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg)
+static int cciss_compat_ioctl(struct block_device *bdev, fmode_t mode,
+			      unsigned cmd, unsigned long arg)
 {
 	switch (cmd) {
 	case CCISS_GETPCIINFO:
@@ -636,20 +638,20 @@
 	case CCISS_REGNEWD:
 	case CCISS_RESCANDISK:
 	case CCISS_GETLUNINFO:
-		return do_ioctl(f, cmd, arg);
+		return do_ioctl(bdev, mode, cmd, arg);
 
 	case CCISS_PASSTHRU32:
-		return cciss_ioctl32_passthru(f, cmd, arg);
+		return cciss_ioctl32_passthru(bdev, mode, cmd, arg);
 	case CCISS_BIG_PASSTHRU32:
-		return cciss_ioctl32_big_passthru(f, cmd, arg);
+		return cciss_ioctl32_big_passthru(bdev, mode, cmd, arg);
 
 	default:
 		return -ENOIOCTLCMD;
 	}
 }
 
-static int cciss_ioctl32_passthru(struct file *f, unsigned cmd,
-				  unsigned long arg)
+static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode,
+				  unsigned cmd, unsigned long arg)
 {
 	IOCTL32_Command_struct __user *arg32 =
 	    (IOCTL32_Command_struct __user *) arg;
@@ -676,7 +678,7 @@
 	if (err)
 		return -EFAULT;
 
-	err = do_ioctl(f, CCISS_PASSTHRU, (unsigned long)p);
+	err = do_ioctl(bdev, mode, CCISS_PASSTHRU, (unsigned long)p);
 	if (err)
 		return err;
 	err |=
@@ -687,8 +689,8 @@
 	return err;
 }
 
-static int cciss_ioctl32_big_passthru(struct file *file, unsigned cmd,
-				      unsigned long arg)
+static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode,
+				      unsigned cmd, unsigned long arg)
 {
 	BIG_IOCTL32_Command_struct __user *arg32 =
 	    (BIG_IOCTL32_Command_struct __user *) arg;
@@ -717,7 +719,7 @@
 	if (err)
 		return -EFAULT;
 
-	err = do_ioctl(file, CCISS_BIG_PASSTHRU, (unsigned long)p);
+	err = do_ioctl(bdev, mode, CCISS_BIG_PASSTHRU, (unsigned long)p);
 	if (err)
 		return err;
 	err |=
@@ -745,10 +747,9 @@
 /*
  * ioctl
  */
-static int cciss_ioctl(struct inode *inode, struct file *filep,
+static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
 		       unsigned int cmd, unsigned long arg)
 {
-	struct block_device *bdev = inode->i_bdev;
 	struct gendisk *disk = bdev->bd_disk;
 	ctlr_info_t *host = get_host(disk);
 	drive_info_struct *drv = get_drv(disk);
@@ -1232,7 +1233,7 @@
 	case SG_EMULATED_HOST:
 	case SG_IO:
 	case SCSI_IOCTL_SEND_COMMAND:
-		return scsi_cmd_ioctl(filep, disk->queue, disk, cmd, argp);
+		return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp);
 
 	/* scsi_cmd_ioctl would normally handle these, below, but */
 	/* they aren't a good fit for cciss, as CD-ROMs are */
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 3d967525..47d233c 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -156,9 +156,9 @@
 	unsigned int blkcnt,
 	unsigned int log_unit );
 
-static int ida_open(struct inode *inode, struct file *filep);
-static int ida_release(struct inode *inode, struct file *filep);
-static int ida_ioctl(struct inode *inode, struct file *filep, unsigned int cmd, unsigned long arg);
+static int ida_open(struct block_device *bdev, fmode_t mode);
+static int ida_release(struct gendisk *disk, fmode_t mode);
+static int ida_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg);
 static int ida_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 static int ida_ctlr_ioctl(ctlr_info_t *h, int dsk, ida_ioctl_t *io);
 
@@ -197,7 +197,7 @@
 	.owner		= THIS_MODULE,
 	.open		= ida_open,
 	.release	= ida_release,
-	.ioctl		= ida_ioctl,
+	.locked_ioctl	= ida_ioctl,
 	.getgeo		= ida_getgeo,
 	.revalidate_disk= ida_revalidate,
 };
@@ -818,12 +818,12 @@
 /*
  * Open.  Make sure the device is really there.
  */
-static int ida_open(struct inode *inode, struct file *filep)
+static int ida_open(struct block_device *bdev, fmode_t mode)
 {
-	drv_info_t *drv = get_drv(inode->i_bdev->bd_disk);
-	ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
+	drv_info_t *drv = get_drv(bdev->bd_disk);
+	ctlr_info_t *host = get_host(bdev->bd_disk);
 
-	DBGINFO(printk("ida_open %s\n", inode->i_bdev->bd_disk->disk_name));
+	DBGINFO(printk("ida_open %s\n", bdev->bd_disk->disk_name));
 	/*
 	 * Root is allowed to open raw volume zero even if it's not configured
 	 * so array config can still work.  I don't think I really like this,
@@ -843,9 +843,9 @@
 /*
  * Close.  Sync first.
  */
-static int ida_release(struct inode *inode, struct file *filep)
+static int ida_release(struct gendisk *disk, fmode_t mode)
 {
-	ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
+	ctlr_info_t *host = get_host(disk);
 	host->usage_count--;
 	return 0;
 }
@@ -1128,10 +1128,10 @@
  *  ida_ioctl does some miscellaneous stuff like reporting drive geometry,
  *  setting readahead and submitting commands from userspace to the controller.
  */
-static int ida_ioctl(struct inode *inode, struct file *filep, unsigned int cmd, unsigned long arg)
+static int ida_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg)
 {
-	drv_info_t *drv = get_drv(inode->i_bdev->bd_disk);
-	ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
+	drv_info_t *drv = get_drv(bdev->bd_disk);
+	ctlr_info_t *host = get_host(bdev->bd_disk);
 	int error;
 	ida_ioctl_t __user *io = (ida_ioctl_t __user *)arg;
 	ida_ioctl_t *my_io;
@@ -1165,7 +1165,7 @@
 		put_user(host->ctlr_sig, (int __user *)arg);
 		return 0;
 	case IDAREVALIDATEVOLS:
-		if (iminor(inode) != 0)
+		if (MINOR(bdev->bd_dev) != 0)
 			return -ENXIO;
 		return revalidate_allvol(host);
 	case IDADRIVERVERSION:
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 2cea27a..14db747 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3450,14 +3450,14 @@
 	return 0;
 }
 
-static int fd_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
+static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
 		    unsigned long param)
 {
-#define FD_IOCTL_ALLOWED ((filp) && (filp)->private_data)
+#define FD_IOCTL_ALLOWED (mode & (FMODE_WRITE|FMODE_WRITE_IOCTL))
 #define OUT(c,x) case c: outparam = (const char *) (x); break
 #define IN(c,x,tag) case c: *(x) = inparam. tag ; return 0
 
-	int drive = (long)inode->i_bdev->bd_disk->private_data;
+	int drive = (long)bdev->bd_disk->private_data;
 	int type = ITYPE(UDRS->fd_device);
 	int i;
 	int ret;
@@ -3516,11 +3516,11 @@
 			current_type[drive] = NULL;
 			floppy_sizes[drive] = MAX_DISK_SIZE << 1;
 			UDRS->keep_data = 0;
-			return invalidate_drive(inode->i_bdev);
+			return invalidate_drive(bdev);
 		case FDSETPRM:
 		case FDDEFPRM:
 			return set_geometry(cmd, &inparam.g,
-					    drive, type, inode->i_bdev);
+					    drive, type, bdev);
 		case FDGETPRM:
 			ECALL(get_floppy_geometry(drive, type,
 						  (struct floppy_struct **)
@@ -3551,7 +3551,7 @@
 		case FDFMTEND:
 		case FDFLUSH:
 			LOCK_FDC(drive, 1);
-			return invalidate_drive(inode->i_bdev);
+			return invalidate_drive(bdev);
 
 		case FDSETEMSGTRESH:
 			UDP->max_errors.reporting =
@@ -3659,9 +3659,9 @@
 		printk("\n");
 }
 
-static int floppy_release(struct inode *inode, struct file *filp)
+static int floppy_release(struct gendisk *disk, fmode_t mode)
 {
-	int drive = (long)inode->i_bdev->bd_disk->private_data;
+	int drive = (long)disk->private_data;
 
 	mutex_lock(&open_lock);
 	if (UDRS->fd_ref < 0)
@@ -3682,18 +3682,17 @@
  * /dev/PS0 etc), and disallows simultaneous access to the same
  * drive with different device numbers.
  */
-static int floppy_open(struct inode *inode, struct file *filp)
+static int floppy_open(struct block_device *bdev, fmode_t mode)
 {
-	int drive = (long)inode->i_bdev->bd_disk->private_data;
-	int old_dev;
+	int drive = (long)bdev->bd_disk->private_data;
+	int old_dev, new_dev;
 	int try;
 	int res = -EBUSY;
 	char *tmp;
 
-	filp->private_data = (void *)0;
 	mutex_lock(&open_lock);
 	old_dev = UDRS->fd_device;
-	if (opened_bdev[drive] && opened_bdev[drive] != inode->i_bdev)
+	if (opened_bdev[drive] && opened_bdev[drive] != bdev)
 		goto out2;
 
 	if (!UDRS->fd_ref && (UDP->flags & FD_BROKEN_DCL)) {
@@ -3701,15 +3700,15 @@
 		USETF(FD_VERIFY);
 	}
 
-	if (UDRS->fd_ref == -1 || (UDRS->fd_ref && (filp->f_flags & O_EXCL)))
+	if (UDRS->fd_ref == -1 || (UDRS->fd_ref && (mode & FMODE_EXCL)))
 		goto out2;
 
-	if (filp->f_flags & O_EXCL)
+	if (mode & FMODE_EXCL)
 		UDRS->fd_ref = -1;
 	else
 		UDRS->fd_ref++;
 
-	opened_bdev[drive] = inode->i_bdev;
+	opened_bdev[drive] = bdev;
 
 	res = -ENXIO;
 
@@ -3744,31 +3743,26 @@
 		}
 	}
 
-	UDRS->fd_device = iminor(inode);
-	set_capacity(disks[drive], floppy_sizes[iminor(inode)]);
-	if (old_dev != -1 && old_dev != iminor(inode)) {
+	new_dev = MINOR(bdev->bd_dev);
+	UDRS->fd_device = new_dev;
+	set_capacity(disks[drive], floppy_sizes[new_dev]);
+	if (old_dev != -1 && old_dev != new_dev) {
 		if (buffer_drive == drive)
 			buffer_track = -1;
 	}
 
-	/* Allow ioctls if we have write-permissions even if read-only open.
-	 * Needed so that programs such as fdrawcmd still can work on write
-	 * protected disks */
-	if ((filp->f_mode & FMODE_WRITE) || !file_permission(filp, MAY_WRITE))
-		filp->private_data = (void *)8;
-
 	if (UFDCS->rawcmd == 1)
 		UFDCS->rawcmd = 2;
 
-	if (!(filp->f_flags & O_NDELAY)) {
-		if (filp->f_mode & 3) {
+	if (!(mode & FMODE_NDELAY)) {
+		if (mode & (FMODE_READ|FMODE_WRITE)) {
 			UDRS->last_checked = 0;
-			check_disk_change(inode->i_bdev);
+			check_disk_change(bdev);
 			if (UTESTF(FD_DISK_CHANGED))
 				goto out;
 		}
 		res = -EROFS;
-		if ((filp->f_mode & 2) && !(UTESTF(FD_DISK_WRITABLE)))
+		if ((mode & FMODE_WRITE) && !(UTESTF(FD_DISK_WRITABLE)))
 			goto out;
 	}
 	mutex_unlock(&open_lock);
@@ -3911,7 +3905,7 @@
 	.owner			= THIS_MODULE,
 	.open			= floppy_open,
 	.release		= floppy_release,
-	.ioctl			= fd_ioctl,
+	.locked_ioctl		= fd_ioctl,
 	.getgeo			= fd_getgeo,
 	.media_changed		= check_floppy_change,
 	.revalidate_disk	= floppy_revalidate,
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index d3a25b0..3f09cd8 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -210,7 +210,7 @@
  * space operations write_begin and write_end.
  */
 static int do_lo_send_aops(struct loop_device *lo, struct bio_vec *bvec,
-		int bsize, loff_t pos, struct page *unused)
+		loff_t pos, struct page *unused)
 {
 	struct file *file = lo->lo_backing_file; /* kudos to NFsckingS */
 	struct address_space *mapping = file->f_mapping;
@@ -302,7 +302,7 @@
  * filesystems.
  */
 static int do_lo_send_direct_write(struct loop_device *lo,
-		struct bio_vec *bvec, int bsize, loff_t pos, struct page *page)
+		struct bio_vec *bvec, loff_t pos, struct page *page)
 {
 	ssize_t bw = __do_lo_send_write(lo->lo_backing_file,
 			kmap(bvec->bv_page) + bvec->bv_offset,
@@ -326,7 +326,7 @@
  * destination pages of the backing file.
  */
 static int do_lo_send_write(struct loop_device *lo, struct bio_vec *bvec,
-		int bsize, loff_t pos, struct page *page)
+		loff_t pos, struct page *page)
 {
 	int ret = lo_do_transfer(lo, WRITE, page, 0, bvec->bv_page,
 			bvec->bv_offset, bvec->bv_len, pos >> 9);
@@ -341,10 +341,9 @@
 	return ret;
 }
 
-static int lo_send(struct loop_device *lo, struct bio *bio, int bsize,
-		loff_t pos)
+static int lo_send(struct loop_device *lo, struct bio *bio, loff_t pos)
 {
-	int (*do_lo_send)(struct loop_device *, struct bio_vec *, int, loff_t,
+	int (*do_lo_send)(struct loop_device *, struct bio_vec *, loff_t,
 			struct page *page);
 	struct bio_vec *bvec;
 	struct page *page = NULL;
@@ -362,7 +361,7 @@
 		}
 	}
 	bio_for_each_segment(bvec, bio, i) {
-		ret = do_lo_send(lo, bvec, bsize, pos, page);
+		ret = do_lo_send(lo, bvec, pos, page);
 		if (ret < 0)
 			break;
 		pos += bvec->bv_len;
@@ -478,7 +477,7 @@
 
 	pos = ((loff_t) bio->bi_sector << 9) + lo->lo_offset;
 	if (bio_rw(bio) == WRITE)
-		ret = lo_send(lo, bio, lo->lo_blocksize, pos);
+		ret = lo_send(lo, bio, pos);
 	else
 		ret = lo_receive(lo, bio, lo->lo_blocksize, pos);
 	return ret;
@@ -652,8 +651,8 @@
  * This can only work if the loop device is used read-only, and if the
  * new backing store is the same size and type as the old backing store.
  */
-static int loop_change_fd(struct loop_device *lo, struct file *lo_file,
-		       struct block_device *bdev, unsigned int arg)
+static int loop_change_fd(struct loop_device *lo, struct block_device *bdev,
+			  unsigned int arg)
 {
 	struct file	*file, *old_file;
 	struct inode	*inode;
@@ -712,7 +711,7 @@
 	return i && S_ISBLK(i->i_mode) && MAJOR(i->i_rdev) == LOOP_MAJOR;
 }
 
-static int loop_set_fd(struct loop_device *lo, struct file *lo_file,
+static int loop_set_fd(struct loop_device *lo, fmode_t mode,
 		       struct block_device *bdev, unsigned int arg)
 {
 	struct file	*file, *f;
@@ -740,7 +739,7 @@
 	while (is_loop_device(f)) {
 		struct loop_device *l;
 
-		if (f->f_mapping->host->i_rdev == lo_file->f_mapping->host->i_rdev)
+		if (f->f_mapping->host->i_bdev == bdev)
 			goto out_putf;
 
 		l = f->f_mapping->host->i_bdev->bd_disk->private_data;
@@ -786,7 +785,7 @@
 		goto out_putf;
 	}
 
-	if (!(lo_file->f_mode & FMODE_WRITE))
+	if (!(mode & FMODE_WRITE))
 		lo_flags |= LO_FLAGS_READ_ONLY;
 
 	set_device_ro(bdev, (lo_flags & LO_FLAGS_READ_ONLY) != 0);
@@ -918,9 +917,11 @@
 	memset(lo->lo_encrypt_key, 0, LO_KEY_SIZE);
 	memset(lo->lo_crypt_name, 0, LO_NAME_SIZE);
 	memset(lo->lo_file_name, 0, LO_NAME_SIZE);
-	invalidate_bdev(bdev);
+	if (bdev)
+		invalidate_bdev(bdev);
 	set_capacity(lo->lo_disk, 0);
-	bd_set_size(bdev, 0);
+	if (bdev)
+		bd_set_size(bdev, 0);
 	mapping_set_gfp_mask(filp->f_mapping, gfp);
 	lo->lo_state = Lo_unbound;
 	fput(filp);
@@ -1137,22 +1138,22 @@
 	return err;
 }
 
-static int lo_ioctl(struct inode * inode, struct file * file,
+static int lo_ioctl(struct block_device *bdev, fmode_t mode,
 	unsigned int cmd, unsigned long arg)
 {
-	struct loop_device *lo = inode->i_bdev->bd_disk->private_data;
+	struct loop_device *lo = bdev->bd_disk->private_data;
 	int err;
 
 	mutex_lock(&lo->lo_ctl_mutex);
 	switch (cmd) {
 	case LOOP_SET_FD:
-		err = loop_set_fd(lo, file, inode->i_bdev, arg);
+		err = loop_set_fd(lo, mode, bdev, arg);
 		break;
 	case LOOP_CHANGE_FD:
-		err = loop_change_fd(lo, file, inode->i_bdev, arg);
+		err = loop_change_fd(lo, bdev, arg);
 		break;
 	case LOOP_CLR_FD:
-		err = loop_clr_fd(lo, inode->i_bdev);
+		err = loop_clr_fd(lo, bdev);
 		break;
 	case LOOP_SET_STATUS:
 		err = loop_set_status_old(lo, (struct loop_info __user *) arg);
@@ -1292,10 +1293,10 @@
 	return err;
 }
 
-static long lo_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+static int lo_compat_ioctl(struct block_device *bdev, fmode_t mode,
+			   unsigned int cmd, unsigned long arg)
 {
-	struct inode *inode = file->f_path.dentry->d_inode;
-	struct loop_device *lo = inode->i_bdev->bd_disk->private_data;
+	struct loop_device *lo = bdev->bd_disk->private_data;
 	int err;
 
 	switch(cmd) {
@@ -1317,7 +1318,7 @@
 		arg = (unsigned long) compat_ptr(arg);
 	case LOOP_SET_FD:
 	case LOOP_CHANGE_FD:
-		err = lo_ioctl(inode, file, cmd, arg);
+		err = lo_ioctl(bdev, mode, cmd, arg);
 		break;
 	default:
 		err = -ENOIOCTLCMD;
@@ -1327,9 +1328,9 @@
 }
 #endif
 
-static int lo_open(struct inode *inode, struct file *file)
+static int lo_open(struct block_device *bdev, fmode_t mode)
 {
-	struct loop_device *lo = inode->i_bdev->bd_disk->private_data;
+	struct loop_device *lo = bdev->bd_disk->private_data;
 
 	mutex_lock(&lo->lo_ctl_mutex);
 	lo->lo_refcnt++;
@@ -1338,15 +1339,15 @@
 	return 0;
 }
 
-static int lo_release(struct inode *inode, struct file *file)
+static int lo_release(struct gendisk *disk, fmode_t mode)
 {
-	struct loop_device *lo = inode->i_bdev->bd_disk->private_data;
+	struct loop_device *lo = disk->private_data;
 
 	mutex_lock(&lo->lo_ctl_mutex);
 	--lo->lo_refcnt;
 
 	if ((lo->lo_flags & LO_FLAGS_AUTOCLEAR) && !lo->lo_refcnt)
-		loop_clr_fd(lo, inode->i_bdev);
+		loop_clr_fd(lo, NULL);
 
 	mutex_unlock(&lo->lo_ctl_mutex);
 
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 9034ca5..d3a91ca 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -557,10 +557,11 @@
 	}
 }
 
-static int nbd_ioctl(struct inode *inode, struct file *file,
+static int nbd_ioctl(struct block_device *bdev, fmode_t mode,
 		     unsigned int cmd, unsigned long arg)
 {
-	struct nbd_device *lo = inode->i_bdev->bd_disk->private_data;
+	struct nbd_device *lo = bdev->bd_disk->private_data;
+	struct file *file;
 	int error;
 	struct request sreq ;
 	struct task_struct *thread;
@@ -612,8 +613,7 @@
 		error = -EINVAL;
 		file = fget(arg);
 		if (file) {
-			struct block_device *bdev = inode->i_bdev;
-			inode = file->f_path.dentry->d_inode;
+			struct inode *inode = file->f_path.dentry->d_inode;
 			if (S_ISSOCK(inode->i_mode)) {
 				lo->file = file;
 				lo->sock = SOCKET_I(inode);
@@ -628,14 +628,14 @@
 	case NBD_SET_BLKSIZE:
 		lo->blksize = arg;
 		lo->bytesize &= ~(lo->blksize-1);
-		inode->i_bdev->bd_inode->i_size = lo->bytesize;
-		set_blocksize(inode->i_bdev, lo->blksize);
+		bdev->bd_inode->i_size = lo->bytesize;
+		set_blocksize(bdev, lo->blksize);
 		set_capacity(lo->disk, lo->bytesize >> 9);
 		return 0;
 	case NBD_SET_SIZE:
 		lo->bytesize = arg & ~(lo->blksize-1);
-		inode->i_bdev->bd_inode->i_size = lo->bytesize;
-		set_blocksize(inode->i_bdev, lo->blksize);
+		bdev->bd_inode->i_size = lo->bytesize;
+		set_blocksize(bdev, lo->blksize);
 		set_capacity(lo->disk, lo->bytesize >> 9);
 		return 0;
 	case NBD_SET_TIMEOUT:
@@ -643,8 +643,8 @@
 		return 0;
 	case NBD_SET_SIZE_BLOCKS:
 		lo->bytesize = ((u64) arg) * lo->blksize;
-		inode->i_bdev->bd_inode->i_size = lo->bytesize;
-		set_blocksize(inode->i_bdev, lo->blksize);
+		bdev->bd_inode->i_size = lo->bytesize;
+		set_blocksize(bdev, lo->blksize);
 		set_capacity(lo->disk, lo->bytesize >> 9);
 		return 0;
 	case NBD_DO_IT:
@@ -666,10 +666,10 @@
 		if (file)
 			fput(file);
 		lo->bytesize = 0;
-		inode->i_bdev->bd_inode->i_size = 0;
+		bdev->bd_inode->i_size = 0;
 		set_capacity(lo->disk, 0);
 		if (max_part > 0)
-			ioctl_by_bdev(inode->i_bdev, BLKRRPART, 0);
+			ioctl_by_bdev(bdev, BLKRRPART, 0);
 		return lo->harderror;
 	case NBD_CLEAR_QUE:
 		/*
@@ -680,7 +680,7 @@
 		return 0;
 	case NBD_PRINT_DEBUG:
 		printk(KERN_INFO "%s: next = %p, prev = %p, head = %p\n",
-			inode->i_bdev->bd_disk->disk_name,
+			bdev->bd_disk->disk_name,
 			lo->queue_head.next, lo->queue_head.prev,
 			&lo->queue_head);
 		return 0;
@@ -691,7 +691,7 @@
 static struct block_device_operations nbd_fops =
 {
 	.owner =	THIS_MODULE,
-	.ioctl =	nbd_ioctl,
+	.locked_ioctl =	nbd_ioctl,
 };
 
 /*
diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c
index b8a994a..e91d4b4 100644
--- a/drivers/block/paride/pcd.c
+++ b/drivers/block/paride/pcd.c
@@ -223,23 +223,24 @@
 
 /* kernel glue structures */
 
-static int pcd_block_open(struct inode *inode, struct file *file)
+static int pcd_block_open(struct block_device *bdev, fmode_t mode)
 {
-	struct pcd_unit *cd = inode->i_bdev->bd_disk->private_data;
-	return cdrom_open(&cd->info, inode, file);
+	struct pcd_unit *cd = bdev->bd_disk->private_data;
+	return cdrom_open(&cd->info, bdev, mode);
 }
 
-static int pcd_block_release(struct inode *inode, struct file *file)
+static int pcd_block_release(struct gendisk *disk, fmode_t mode)
 {
-	struct pcd_unit *cd = inode->i_bdev->bd_disk->private_data;
-	return cdrom_release(&cd->info, file);
+	struct pcd_unit *cd = disk->private_data;
+	cdrom_release(&cd->info, mode);
+	return 0;
 }
 
-static int pcd_block_ioctl(struct inode *inode, struct file *file,
+static int pcd_block_ioctl(struct block_device *bdev, fmode_t mode,
 				unsigned cmd, unsigned long arg)
 {
-	struct pcd_unit *cd = inode->i_bdev->bd_disk->private_data;
-	return cdrom_ioctl(file, &cd->info, inode, cmd, arg);
+	struct pcd_unit *cd = bdev->bd_disk->private_data;
+	return cdrom_ioctl(&cd->info, bdev, mode, cmd, arg);
 }
 
 static int pcd_block_media_changed(struct gendisk *disk)
@@ -252,7 +253,7 @@
 	.owner		= THIS_MODULE,
 	.open		= pcd_block_open,
 	.release	= pcd_block_release,
-	.ioctl		= pcd_block_ioctl,
+	.locked_ioctl	= pcd_block_ioctl,
 	.media_changed	= pcd_block_media_changed,
 };
 
diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c
index 5fdfa7c..9299455 100644
--- a/drivers/block/paride/pd.c
+++ b/drivers/block/paride/pd.c
@@ -728,9 +728,9 @@
 
 /* kernel glue structures */
 
-static int pd_open(struct inode *inode, struct file *file)
+static int pd_open(struct block_device *bdev, fmode_t mode)
 {
-	struct pd_unit *disk = inode->i_bdev->bd_disk->private_data;
+	struct pd_unit *disk = bdev->bd_disk->private_data;
 
 	disk->access++;
 
@@ -758,10 +758,10 @@
 	return 0;
 }
 
-static int pd_ioctl(struct inode *inode, struct file *file,
+static int pd_ioctl(struct block_device *bdev, fmode_t mode,
 	 unsigned int cmd, unsigned long arg)
 {
-	struct pd_unit *disk = inode->i_bdev->bd_disk->private_data;
+	struct pd_unit *disk = bdev->bd_disk->private_data;
 
 	switch (cmd) {
 	case CDROMEJECT:
@@ -773,9 +773,9 @@
 	}
 }
 
-static int pd_release(struct inode *inode, struct file *file)
+static int pd_release(struct gendisk *p, fmode_t mode)
 {
-	struct pd_unit *disk = inode->i_bdev->bd_disk->private_data;
+	struct pd_unit *disk = p->private_data;
 
 	if (!--disk->access && disk->removable)
 		pd_special_command(disk, pd_door_unlock);
@@ -809,7 +809,7 @@
 	.owner		= THIS_MODULE,
 	.open		= pd_open,
 	.release	= pd_release,
-	.ioctl		= pd_ioctl,
+	.locked_ioctl	= pd_ioctl,
 	.getgeo		= pd_getgeo,
 	.media_changed	= pd_check_media,
 	.revalidate_disk= pd_revalidate
diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c
index e7fe6ca..bef3b99 100644
--- a/drivers/block/paride/pf.c
+++ b/drivers/block/paride/pf.c
@@ -201,13 +201,13 @@
 #define ATAPI_READ_10		0x28
 #define ATAPI_WRITE_10		0x2a
 
-static int pf_open(struct inode *inode, struct file *file);
+static int pf_open(struct block_device *bdev, fmode_t mode);
 static void do_pf_request(struct request_queue * q);
-static int pf_ioctl(struct inode *inode, struct file *file,
+static int pf_ioctl(struct block_device *bdev, fmode_t mode,
 		    unsigned int cmd, unsigned long arg);
 static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 
-static int pf_release(struct inode *inode, struct file *file);
+static int pf_release(struct gendisk *disk, fmode_t mode);
 
 static int pf_detect(void);
 static void do_pf_read(void);
@@ -266,7 +266,7 @@
 	.owner		= THIS_MODULE,
 	.open		= pf_open,
 	.release	= pf_release,
-	.ioctl		= pf_ioctl,
+	.locked_ioctl	= pf_ioctl,
 	.getgeo		= pf_getgeo,
 	.media_changed	= pf_check_media,
 };
@@ -296,16 +296,16 @@
 	}
 }
 
-static int pf_open(struct inode *inode, struct file *file)
+static int pf_open(struct block_device *bdev, fmode_t mode)
 {
-	struct pf_unit *pf = inode->i_bdev->bd_disk->private_data;
+	struct pf_unit *pf = bdev->bd_disk->private_data;
 
 	pf_identify(pf);
 
 	if (pf->media_status == PF_NM)
 		return -ENODEV;
 
-	if ((pf->media_status == PF_RO) && (file->f_mode & 2))
+	if ((pf->media_status == PF_RO) && (mode & FMODE_WRITE))
 		return -EROFS;
 
 	pf->access++;
@@ -333,9 +333,9 @@
 	return 0;
 }
 
-static int pf_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static int pf_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg)
 {
-	struct pf_unit *pf = inode->i_bdev->bd_disk->private_data;
+	struct pf_unit *pf = bdev->bd_disk->private_data;
 
 	if (cmd != CDROMEJECT)
 		return -EINVAL;
@@ -346,9 +346,9 @@
 	return 0;
 }
 
-static int pf_release(struct inode *inode, struct file *file)
+static int pf_release(struct gendisk *disk, fmode_t mode)
 {
-	struct pf_unit *pf = inode->i_bdev->bd_disk->private_data;
+	struct pf_unit *pf = disk->private_data;
 
 	if (pf->access <= 0)
 		return -EINVAL;
diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c
index 5ae2296..1e4006e 100644
--- a/drivers/block/paride/pt.c
+++ b/drivers/block/paride/pt.c
@@ -667,7 +667,7 @@
 		goto out;
 
 	err = -EROFS;
-	if ((!(tape->flags & PT_WRITE_OK)) && (file->f_mode & 2))
+	if ((!(tape->flags & PT_WRITE_OK)) && (file->f_mode & FMODE_WRITE))
 		goto out;
 
 	if (!(iminor(inode) & 128))
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 195ca7c..f20bf35 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -2320,7 +2320,7 @@
 /*
  * called at open time.
  */
-static int pkt_open_dev(struct pktcdvd_device *pd, int write)
+static int pkt_open_dev(struct pktcdvd_device *pd, fmode_t write)
 {
 	int ret;
 	long lba;
@@ -2332,7 +2332,7 @@
 	 * so bdget() can't fail.
 	 */
 	bdget(pd->bdev->bd_dev);
-	if ((ret = blkdev_get(pd->bdev, FMODE_READ, O_RDONLY)))
+	if ((ret = blkdev_get(pd->bdev, FMODE_READ)))
 		goto out;
 
 	if ((ret = bd_claim(pd->bdev, pd)))
@@ -2381,7 +2381,7 @@
 out_unclaim:
 	bd_release(pd->bdev);
 out_putdev:
-	blkdev_put(pd->bdev);
+	blkdev_put(pd->bdev, FMODE_READ);
 out:
 	return ret;
 }
@@ -2399,7 +2399,7 @@
 
 	pkt_set_speed(pd, MAX_SPEED, MAX_SPEED);
 	bd_release(pd->bdev);
-	blkdev_put(pd->bdev);
+	blkdev_put(pd->bdev, FMODE_READ);
 
 	pkt_shrink_pktlist(pd);
 }
@@ -2411,7 +2411,7 @@
 	return pkt_devs[dev_minor];
 }
 
-static int pkt_open(struct inode *inode, struct file *file)
+static int pkt_open(struct block_device *bdev, fmode_t mode)
 {
 	struct pktcdvd_device *pd = NULL;
 	int ret;
@@ -2419,7 +2419,7 @@
 	VPRINTK(DRIVER_NAME": entering open\n");
 
 	mutex_lock(&ctl_mutex);
-	pd = pkt_find_dev_from_minor(iminor(inode));
+	pd = pkt_find_dev_from_minor(MINOR(bdev->bd_dev));
 	if (!pd) {
 		ret = -ENODEV;
 		goto out;
@@ -2428,20 +2428,20 @@
 
 	pd->refcnt++;
 	if (pd->refcnt > 1) {
-		if ((file->f_mode & FMODE_WRITE) &&
+		if ((mode & FMODE_WRITE) &&
 		    !test_bit(PACKET_WRITABLE, &pd->flags)) {
 			ret = -EBUSY;
 			goto out_dec;
 		}
 	} else {
-		ret = pkt_open_dev(pd, file->f_mode & FMODE_WRITE);
+		ret = pkt_open_dev(pd, mode & FMODE_WRITE);
 		if (ret)
 			goto out_dec;
 		/*
 		 * needed here as well, since ext2 (among others) may change
 		 * the blocksize at mount time
 		 */
-		set_blocksize(inode->i_bdev, CD_FRAMESIZE);
+		set_blocksize(bdev, CD_FRAMESIZE);
 	}
 
 	mutex_unlock(&ctl_mutex);
@@ -2455,9 +2455,9 @@
 	return ret;
 }
 
-static int pkt_close(struct inode *inode, struct file *file)
+static int pkt_close(struct gendisk *disk, fmode_t mode)
 {
-	struct pktcdvd_device *pd = inode->i_bdev->bd_disk->private_data;
+	struct pktcdvd_device *pd = disk->private_data;
 	int ret = 0;
 
 	mutex_lock(&ctl_mutex);
@@ -2765,7 +2765,7 @@
 	bdev = bdget(dev);
 	if (!bdev)
 		return -ENOMEM;
-	ret = blkdev_get(bdev, FMODE_READ, O_RDONLY | O_NONBLOCK);
+	ret = blkdev_get(bdev, FMODE_READ | FMODE_NDELAY);
 	if (ret)
 		return ret;
 
@@ -2790,19 +2790,28 @@
 	return 0;
 
 out_mem:
-	blkdev_put(bdev);
+	blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
 	/* This is safe: open() is still holding a reference. */
 	module_put(THIS_MODULE);
 	return ret;
 }
 
-static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static int pkt_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg)
 {
-	struct pktcdvd_device *pd = inode->i_bdev->bd_disk->private_data;
+	struct pktcdvd_device *pd = bdev->bd_disk->private_data;
 
-	VPRINTK("pkt_ioctl: cmd %x, dev %d:%d\n", cmd, imajor(inode), iminor(inode));
+	VPRINTK("pkt_ioctl: cmd %x, dev %d:%d\n", cmd,
+		MAJOR(bdev->bd_dev), MINOR(bdev->bd_dev));
 
 	switch (cmd) {
+	case CDROMEJECT:
+		/*
+		 * The door gets locked when the device is opened, so we
+		 * have to unlock it or else the eject command fails.
+		 */
+		if (pd->refcnt == 1)
+			pkt_lock_door(pd, 0);
+		/* fallthru */
 	/*
 	 * forward selected CDROM ioctls to CD-ROM, for UDF
 	 */
@@ -2811,16 +2820,7 @@
 	case CDROM_LAST_WRITTEN:
 	case CDROM_SEND_PACKET:
 	case SCSI_IOCTL_SEND_COMMAND:
-		return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
-
-	case CDROMEJECT:
-		/*
-		 * The door gets locked when the device is opened, so we
-		 * have to unlock it or else the eject command fails.
-		 */
-		if (pd->refcnt == 1)
-			pkt_lock_door(pd, 0);
-		return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
+		return __blkdev_driver_ioctl(pd->bdev, mode, cmd, arg);
 
 	default:
 		VPRINTK(DRIVER_NAME": Unknown ioctl for %s (%x)\n", pd->name, cmd);
@@ -2849,7 +2849,7 @@
 	.owner =		THIS_MODULE,
 	.open =			pkt_open,
 	.release =		pkt_close,
-	.ioctl =		pkt_ioctl,
+	.locked_ioctl =		pkt_ioctl,
 	.media_changed =	pkt_media_changed,
 };
 
@@ -2975,7 +2975,7 @@
 	pkt_debugfs_dev_remove(pd);
 	pkt_sysfs_dev_remove(pd);
 
-	blkdev_put(pd->bdev);
+	blkdev_put(pd->bdev, FMODE_READ|FMODE_WRITE);
 
 	remove_proc_entry(pd->name, pkt_proc);
 	DPRINTK(DRIVER_NAME": writer %s unmapped\n", pd->name);
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index 730ccea..61296530 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -244,10 +244,10 @@
 		      int interruptible);
 static void release_drive(struct floppy_state *fs);
 static int fd_eject(struct floppy_state *fs);
-static int floppy_ioctl(struct inode *inode, struct file *filp,
+static int floppy_ioctl(struct block_device *bdev, fmode_t mode,
 			unsigned int cmd, unsigned long param);
-static int floppy_open(struct inode *inode, struct file *filp);
-static int floppy_release(struct inode *inode, struct file *filp);
+static int floppy_open(struct block_device *bdev, fmode_t mode);
+static int floppy_release(struct gendisk *disk, fmode_t mode);
 static int floppy_check_change(struct gendisk *disk);
 static int floppy_revalidate(struct gendisk *disk);
 
@@ -839,10 +839,10 @@
 static struct floppy_struct floppy_type =
 	{ 2880,18,2,80,0,0x1B,0x00,0xCF,0x6C,NULL };	/*  7 1.44MB 3.5"   */
 
-static int floppy_ioctl(struct inode *inode, struct file *filp,
+static int floppy_ioctl(struct block_device *bdev, fmode_t mode,
 			unsigned int cmd, unsigned long param)
 {
-	struct floppy_state *fs = inode->i_bdev->bd_disk->private_data;
+	struct floppy_state *fs = bdev->bd_disk->private_data;
 	int err;
 		
 	if ((cmd & 0x80) && !capable(CAP_SYS_ADMIN))
@@ -868,9 +868,9 @@
 	return -ENOTTY;
 }
 
-static int floppy_open(struct inode *inode, struct file *filp)
+static int floppy_open(struct block_device *bdev, fmode_t mode)
 {
-	struct floppy_state *fs = inode->i_bdev->bd_disk->private_data;
+	struct floppy_state *fs = bdev->bd_disk->private_data;
 	struct swim3 __iomem *sw = fs->swim3;
 	int n, err = 0;
 
@@ -904,17 +904,17 @@
 		swim3_action(fs, SETMFM);
 		swim3_select(fs, RELAX);
 
-	} else if (fs->ref_count == -1 || filp->f_flags & O_EXCL)
+	} else if (fs->ref_count == -1 || mode & FMODE_EXCL)
 		return -EBUSY;
 
-	if (err == 0 && (filp->f_flags & O_NDELAY) == 0
-	    && (filp->f_mode & 3)) {
-		check_disk_change(inode->i_bdev);
+	if (err == 0 && (mode & FMODE_NDELAY) == 0
+	    && (mode & (FMODE_READ|FMODE_WRITE))) {
+		check_disk_change(bdev);
 		if (fs->ejected)
 			err = -ENXIO;
 	}
 
-	if (err == 0 && (filp->f_mode & 2)) {
+	if (err == 0 && (mode & FMODE_WRITE)) {
 		if (fs->write_prot < 0)
 			fs->write_prot = swim3_readbit(fs, WRITE_PROT);
 		if (fs->write_prot)
@@ -930,7 +930,7 @@
 		return err;
 	}
 
-	if (filp->f_flags & O_EXCL)
+	if (mode & FMODE_EXCL)
 		fs->ref_count = -1;
 	else
 		++fs->ref_count;
@@ -938,9 +938,9 @@
 	return 0;
 }
 
-static int floppy_release(struct inode *inode, struct file *filp)
+static int floppy_release(struct gendisk *disk, fmode_t mode)
 {
-	struct floppy_state *fs = inode->i_bdev->bd_disk->private_data;
+	struct floppy_state *fs = disk->private_data;
 	struct swim3 __iomem *sw = fs->swim3;
 	if (fs->ref_count > 0 && --fs->ref_count == 0) {
 		swim3_action(fs, MOTOR_OFF);
@@ -1000,7 +1000,7 @@
 static struct block_device_operations floppy_fops = {
 	.open		= floppy_open,
 	.release	= floppy_release,
-	.ioctl		= floppy_ioctl,
+	.locked_ioctl	= floppy_ioctl,
 	.media_changed	= floppy_check_change,
 	.revalidate_disk= floppy_revalidate,
 };
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index f60e418..fccac18 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -1667,10 +1667,9 @@
  * This is mostly needed to keep refcounting, but also to support
  * media checks on removable media drives.
  */
-static int ub_bd_open(struct inode *inode, struct file *filp)
+static int ub_bd_open(struct block_device *bdev, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
-	struct ub_lun *lun = disk->private_data;
+	struct ub_lun *lun = bdev->bd_disk->private_data;
 	struct ub_dev *sc = lun->udev;
 	unsigned long flags;
 	int rc;
@@ -1684,19 +1683,19 @@
 	spin_unlock_irqrestore(&ub_lock, flags);
 
 	if (lun->removable || lun->readonly)
-		check_disk_change(inode->i_bdev);
+		check_disk_change(bdev);
 
 	/*
 	 * The sd.c considers ->media_present and ->changed not equivalent,
 	 * under some pretty murky conditions (a failure of READ CAPACITY).
 	 * We may need it one day.
 	 */
-	if (lun->removable && lun->changed && !(filp->f_flags & O_NDELAY)) {
+	if (lun->removable && lun->changed && !(mode & FMODE_NDELAY)) {
 		rc = -ENOMEDIUM;
 		goto err_open;
 	}
 
-	if (lun->readonly && (filp->f_mode & FMODE_WRITE)) {
+	if (lun->readonly && (mode & FMODE_WRITE)) {
 		rc = -EROFS;
 		goto err_open;
 	}
@@ -1710,9 +1709,8 @@
 
 /*
  */
-static int ub_bd_release(struct inode *inode, struct file *filp)
+static int ub_bd_release(struct gendisk *disk, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
 	struct ub_lun *lun = disk->private_data;
 	struct ub_dev *sc = lun->udev;
 
@@ -1723,13 +1721,13 @@
 /*
  * The ioctl interface.
  */
-static int ub_bd_ioctl(struct inode *inode, struct file *filp,
+static int ub_bd_ioctl(struct block_device *bdev, fmode_t mode,
     unsigned int cmd, unsigned long arg)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
+	struct gendisk *disk = bdev->bd_disk;
 	void __user *usermem = (void __user *) arg;
 
-	return scsi_cmd_ioctl(filp, disk->queue, disk, cmd, usermem);
+	return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, usermem);
 }
 
 /*
@@ -1793,7 +1791,7 @@
 	.owner		= THIS_MODULE,
 	.open		= ub_bd_open,
 	.release	= ub_bd_release,
-	.ioctl		= ub_bd_ioctl,
+	.locked_ioctl	= ub_bd_ioctl,
 	.media_changed	= ub_bd_media_changed,
 	.revalidate_disk = ub_bd_revalidate,
 };
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index 1730d29..ecccf65 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -130,15 +130,15 @@
 /*
  * External open entry point.
  */
-static int viodasd_open(struct inode *ino, struct file *fil)
+static int viodasd_open(struct block_device *bdev, fmode_t mode)
 {
-	struct viodasd_device *d = ino->i_bdev->bd_disk->private_data;
+	struct viodasd_device *d = bdev->bd_disk->private_data;
 	HvLpEvent_Rc hvrc;
 	struct viodasd_waitevent we;
 	u16 flags = 0;
 
 	if (d->read_only) {
-		if ((fil != NULL) && (fil->f_mode & FMODE_WRITE))
+		if (mode & FMODE_WRITE)
 			return -EROFS;
 		flags = vioblockflags_ro;
 	}
@@ -179,9 +179,9 @@
 /*
  * External release entry point.
  */
-static int viodasd_release(struct inode *ino, struct file *fil)
+static int viodasd_release(struct gendisk *disk, fmode_t mode)
 {
-	struct viodasd_device *d = ino->i_bdev->bd_disk->private_data;
+	struct viodasd_device *d = disk->private_data;
 	HvLpEvent_Rc hvrc;
 
 	/* Send the event to OS/400.  We DON'T expect a response */
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 6ec5fc0..85d79a0 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -146,11 +146,11 @@
 		vblk->vq->vq_ops->kick(vblk->vq);
 }
 
-static int virtblk_ioctl(struct inode *inode, struct file *filp,
+static int virtblk_ioctl(struct block_device *bdev, fmode_t mode,
 			 unsigned cmd, unsigned long data)
 {
-	return scsi_cmd_ioctl(filp, inode->i_bdev->bd_disk->queue,
-			      inode->i_bdev->bd_disk, cmd,
+	return scsi_cmd_ioctl(bdev->bd_disk->queue,
+			      bdev->bd_disk, mode, cmd,
 			      (void __user *)data);
 }
 
@@ -180,7 +180,7 @@
 }
 
 static struct block_device_operations virtblk_fops = {
-	.ioctl  = virtblk_ioctl,
+	.locked_ioctl = virtblk_ioctl,
 	.owner  = THIS_MODULE,
 	.getgeo = virtblk_getgeo,
 };
diff --git a/drivers/block/xd.c b/drivers/block/xd.c
index 624d30f..64b496f 100644
--- a/drivers/block/xd.c
+++ b/drivers/block/xd.c
@@ -132,7 +132,7 @@
 
 static struct block_device_operations xd_fops = {
 	.owner	= THIS_MODULE,
-	.ioctl	= xd_ioctl,
+	.locked_ioctl	= xd_ioctl,
 	.getgeo = xd_getgeo,
 };
 static DECLARE_WAIT_QUEUE_HEAD(xd_wait_int);
@@ -343,7 +343,7 @@
 }
 
 /* xd_ioctl: handle device ioctl's */
-static int xd_ioctl (struct inode *inode,struct file *file,u_int cmd,u_long arg)
+static int xd_ioctl(struct block_device *bdev, fmode_t mode, u_int cmd, u_long arg)
 {
 	switch (cmd) {
 		case HDIO_SET_DMA:
diff --git a/drivers/block/xd.h b/drivers/block/xd.h
index cffd44a..37cacef 100644
--- a/drivers/block/xd.h
+++ b/drivers/block/xd.h
@@ -105,7 +105,7 @@
 static u_char xd_initdrives (void (*init_drive)(u_char drive));
 
 static void do_xd_request (struct request_queue * q);
-static int xd_ioctl (struct inode *inode,struct file *file,unsigned int cmd,unsigned long arg);
+static int xd_ioctl (struct block_device *bdev,fmode_t mode,unsigned int cmd,unsigned long arg);
 static int xd_readwrite (u_char operation,XD_INFO *disk,char *buffer,u_int block,u_int count);
 static void xd_recalibrate (u_char drive);
 
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 1a50ae7..b220c68 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -156,11 +156,10 @@
 	return 0;
 }
 
-static int blkif_ioctl(struct inode *inode, struct file *filep,
+static int blkif_ioctl(struct block_device *bdev, fmode_t mode,
 		       unsigned command, unsigned long argument)
 {
-	struct blkfront_info *info =
-		inode->i_bdev->bd_disk->private_data;
+	struct blkfront_info *info = bdev->bd_disk->private_data;
 	int i;
 
 	dev_dbg(&info->xbdev->dev, "command: 0x%x, argument: 0x%lx\n",
@@ -1014,16 +1013,16 @@
 	return info->is_ready;
 }
 
-static int blkif_open(struct inode *inode, struct file *filep)
+static int blkif_open(struct block_device *bdev, fmode_t mode)
 {
-	struct blkfront_info *info = inode->i_bdev->bd_disk->private_data;
+	struct blkfront_info *info = bdev->bd_disk->private_data;
 	info->users++;
 	return 0;
 }
 
-static int blkif_release(struct inode *inode, struct file *filep)
+static int blkif_release(struct gendisk *disk, fmode_t mode)
 {
-	struct blkfront_info *info = inode->i_bdev->bd_disk->private_data;
+	struct blkfront_info *info = disk->private_data;
 	info->users--;
 	if (info->users == 0) {
 		/* Check whether we have been instructed to close.  We will
@@ -1044,7 +1043,7 @@
 	.open = blkif_open,
 	.release = blkif_release,
 	.getgeo = blkif_getgeo,
-	.ioctl = blkif_ioctl,
+	.locked_ioctl = blkif_ioctl,
 };
 
 
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 4a7a059..ecab9e6 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -870,25 +870,24 @@
 	return ace->id_result;
 }
 
-static int ace_open(struct inode *inode, struct file *filp)
+static int ace_open(struct block_device *bdev, fmode_t mode)
 {
-	struct ace_device *ace = inode->i_bdev->bd_disk->private_data;
+	struct ace_device *ace = bdev->bd_disk->private_data;
 	unsigned long flags;
 
 	dev_dbg(ace->dev, "ace_open() users=%i\n", ace->users + 1);
 
-	filp->private_data = ace;
 	spin_lock_irqsave(&ace->lock, flags);
 	ace->users++;
 	spin_unlock_irqrestore(&ace->lock, flags);
 
-	check_disk_change(inode->i_bdev);
+	check_disk_change(bdev);
 	return 0;
 }
 
-static int ace_release(struct inode *inode, struct file *filp)
+static int ace_release(struct gendisk *disk, fmode_t mode)
 {
-	struct ace_device *ace = inode->i_bdev->bd_disk->private_data;
+	struct ace_device *ace = disk->private_data;
 	unsigned long flags;
 	u16 val;
 
diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c
index be20a67..80754cd 100644
--- a/drivers/block/z2ram.c
+++ b/drivers/block/z2ram.c
@@ -137,8 +137,7 @@
     return;
 }
 
-static int
-z2_open( struct inode *inode, struct file *filp )
+static int z2_open(struct block_device *bdev, fmode_t mode)
 {
     int device;
     int max_z2_map = ( Z2RAM_SIZE / Z2RAM_CHUNKSIZE ) *
@@ -147,7 +146,7 @@
 	sizeof( z2ram_map[0] );
     int rc = -ENOMEM;
 
-    device = iminor(inode);
+    device = MINOR(bdev->bd_dev);
 
     if ( current_device != -1 && current_device != device )
     {
@@ -299,7 +298,7 @@
 }
 
 static int
-z2_release( struct inode *inode, struct file *filp )
+z2_release(struct gendisk *disk, fmode_t mode)
 {
     if ( current_device == -1 )
 	return 0;     
diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c
index 58630cc..cda6c7c 100644
--- a/drivers/bluetooth/btsdio.c
+++ b/drivers/bluetooth/btsdio.c
@@ -152,7 +152,7 @@
 
 	err = sdio_readsb(data->func, skb->data, REG_RDAT, len - 4);
 	if (err < 0) {
-		kfree(skb);
+		kfree_skb(skb);
 		return err;
 	}
 
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index d47f2f8..d16b024 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -973,7 +973,7 @@
  * is in their own interest: device control becomes a lot easier
  * this way.
  */
-int cdrom_open(struct cdrom_device_info *cdi, struct inode *ip, struct file *fp)
+int cdrom_open(struct cdrom_device_info *cdi, struct block_device *bdev, fmode_t mode)
 {
 	int ret;
 
@@ -982,14 +982,14 @@
 	/* if this was a O_NONBLOCK open and we should honor the flags,
 	 * do a quick open without drive/disc integrity checks. */
 	cdi->use_count++;
-	if ((fp->f_flags & O_NONBLOCK) && (cdi->options & CDO_USE_FFLAGS)) {
+	if ((mode & FMODE_NDELAY) && (cdi->options & CDO_USE_FFLAGS)) {
 		ret = cdi->ops->open(cdi, 1);
 	} else {
 		ret = open_for_data(cdi);
 		if (ret)
 			goto err;
 		cdrom_mmc3_profile(cdi);
-		if (fp->f_mode & FMODE_WRITE) {
+		if (mode & FMODE_WRITE) {
 			ret = -EROFS;
 			if (cdrom_open_write(cdi))
 				goto err_release;
@@ -1007,7 +1007,7 @@
 			cdi->name, cdi->use_count);
 	/* Do this on open.  Don't wait for mount, because they might
 	    not be mounting, but opening with O_NONBLOCK */
-	check_disk_change(ip->i_bdev);
+	check_disk_change(bdev);
 	return 0;
 err_release:
 	if (CDROM_CAN(CDC_LOCK) && cdi->options & CDO_LOCK) {
@@ -1184,7 +1184,7 @@
 	return 0;
 }
 
-int cdrom_release(struct cdrom_device_info *cdi, struct file *fp)
+void cdrom_release(struct cdrom_device_info *cdi, fmode_t mode)
 {
 	struct cdrom_device_ops *cdo = cdi->ops;
 	int opened_for_data;
@@ -1205,7 +1205,7 @@
 	}
 
 	opened_for_data = !(cdi->options & CDO_USE_FFLAGS) ||
-		!(fp && fp->f_flags & O_NONBLOCK);
+		!(mode & FMODE_NDELAY);
 
 	/*
 	 * flush cache on last write release
@@ -1219,7 +1219,6 @@
 		    cdi->options & CDO_AUTO_EJECT && CDROM_CAN(CDC_OPEN_TRAY))
 			cdo->tray_move(cdi, 1);
 	}
-	return 0;
 }
 
 static int cdrom_read_mech_status(struct cdrom_device_info *cdi, 
@@ -2662,17 +2661,17 @@
  * these days.
  * ATAPI / SCSI specific code now mainly resides in mmc_ioctl().
  */
-int cdrom_ioctl(struct file * file, struct cdrom_device_info *cdi,
-		struct inode *ip, unsigned int cmd, unsigned long arg)
+int cdrom_ioctl(struct cdrom_device_info *cdi, struct block_device *bdev,
+		fmode_t mode, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int ret;
-	struct gendisk *disk = ip->i_bdev->bd_disk;
+	struct gendisk *disk = bdev->bd_disk;
 
 	/*
 	 * Try the generic SCSI command ioctl's first.
 	 */
-	ret = scsi_cmd_ioctl(file, disk->queue, disk, cmd, argp);
+	ret = scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp);
 	if (ret != -ENOTTY)
 		return ret;
 
@@ -2696,7 +2695,7 @@
 	case CDROM_SELECT_DISC:
 		return cdrom_ioctl_select_disc(cdi, arg);
 	case CDROMRESET:
-		return cdrom_ioctl_reset(cdi, ip->i_bdev);
+		return cdrom_ioctl_reset(cdi, bdev);
 	case CDROM_LOCKDOOR:
 		return cdrom_ioctl_lock_door(cdi, arg);
 	case CDROM_DEBUG:
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index d6ba77a..9aaa86b 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -490,14 +490,14 @@
 	.n_minors		= 1,
 };
 
-static int gdrom_bdops_open(struct inode *inode, struct file *file)
+static int gdrom_bdops_open(struct block_device *bdev, fmode_t mode)
 {
-	return cdrom_open(gd.cd_info, inode, file);
+	return cdrom_open(gd.cd_info, bdev, mode);
 }
 
-static int gdrom_bdops_release(struct inode *inode, struct file *file)
+static int gdrom_bdops_release(struct block_device *bdev, fmode_t mode)
 {
-	return cdrom_release(gd.cd_info, file);
+	return cdrom_release(gd.cd_info, mode);
 }
 
 static int gdrom_bdops_mediachanged(struct gendisk *disk)
@@ -505,10 +505,10 @@
 	return cdrom_media_changed(gd.cd_info);
 }
 
-static int gdrom_bdops_ioctl(struct inode *inode, struct file *file,
+static int gdrom_bdops_ioctl(struct block_device *bdev, fmode_t mode,
 	unsigned cmd, unsigned long arg)
 {
-	return cdrom_ioctl(file, gd.cd_info, inode, cmd, arg);
+	return cdrom_ioctl(gd.cd_info, bdev, mode, cmd, arg);
 }
 
 static struct block_device_operations gdrom_bdops = {
@@ -516,7 +516,7 @@
 	.open			= gdrom_bdops_open,
 	.release		= gdrom_bdops_release,
 	.media_changed		= gdrom_bdops_mediachanged,
-	.ioctl			= gdrom_bdops_ioctl,
+	.locked_ioctl		= gdrom_bdops_ioctl,
 };
 
 static irqreturn_t gdrom_command_interrupt(int irq, void *dev_id)
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 031e0e1..1392935 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -151,23 +151,24 @@
 	.release	= single_release,
 };
 
-static int viocd_blk_open(struct inode *inode, struct file *file)
+static int viocd_blk_open(struct block_device *bdev, fmode_t mode)
 {
-	struct disk_info *di = inode->i_bdev->bd_disk->private_data;
-	return cdrom_open(&di->viocd_info, inode, file);
+	struct disk_info *di = bdev->bd_disk->private_data;
+	return cdrom_open(&di->viocd_info, bdev, mode);
 }
 
-static int viocd_blk_release(struct inode *inode, struct file *file)
+static int viocd_blk_release(struct gendisk *disk, fmode_t mode)
 {
-	struct disk_info *di = inode->i_bdev->bd_disk->private_data;
-	return cdrom_release(&di->viocd_info, file);
+	struct disk_info *di = disk->private_data;
+	cdrom_release(&di->viocd_info, mode);
+	return 0;
 }
 
-static int viocd_blk_ioctl(struct inode *inode, struct file *file,
+static int viocd_blk_ioctl(struct block_device *bdev, fmode_t mode,
 		unsigned cmd, unsigned long arg)
 {
-	struct disk_info *di = inode->i_bdev->bd_disk->private_data;
-	return cdrom_ioctl(file, &di->viocd_info, inode, cmd, arg);
+	struct disk_info *di = bdev->bd_disk->private_data;
+	return cdrom_ioctl(&di->viocd_info, bdev, mode, cmd, arg);
 }
 
 static int viocd_blk_media_changed(struct gendisk *disk)
@@ -180,7 +181,7 @@
 	.owner =		THIS_MODULE,
 	.open =			viocd_blk_open,
 	.release =		viocd_blk_release,
-	.ioctl =		viocd_blk_ioctl,
+	.locked_ioctl =		viocd_blk_ioctl,
 	.media_changed =	viocd_blk_media_changed,
 };
 
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 98821f9..b97aebd 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -2071,12 +2071,13 @@
 module_exit(rs_exit)
 
 
+#if defined(CONFIG_SERIAL_CONSOLE) && !defined(MODULE)
+
 /*
  * ------------------------------------------------------------
  * Serial console driver
  * ------------------------------------------------------------
  */
-#ifdef CONFIG_SERIAL_CONSOLE
 
 static void amiga_serial_putc(char c)
 {
@@ -2130,6 +2131,7 @@
 	return 0;
 }
 console_initcall(amiserial_console_init);
-#endif
+
+#endif /* CONFIG_SERIAL_CONSOLE && !MODULE */
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index bf70450..5b819b1 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -161,7 +161,7 @@
 			}
 		} else {
 			r = cons_ops[index]->put_chars(vtermnos[index], c, i);
-			if (r < 0) {
+			if (r <= 0) {
 				/* throw away chars on error */
 				i = 0;
 			} else if (r > 0) {
@@ -374,6 +374,9 @@
 		if (hp->ops->notifier_del)
 			hp->ops->notifier_del(hp, hp->data);
 
+		/* cancel pending tty resize work */
+		cancel_work_sync(&hp->tty_resize);
+
 		/*
 		 * Chain calls chars_in_buffer() and returns immediately if
 		 * there is no buffered data otherwise sleeps on a wait queue
@@ -399,6 +402,9 @@
 	if (!hp)
 		return;
 
+	/* cancel pending tty resize work */
+	cancel_work_sync(&hp->tty_resize);
+
 	spin_lock_irqsave(&hp->lock, flags);
 
 	/*
@@ -418,8 +424,8 @@
 
 	spin_unlock_irqrestore(&hp->lock, flags);
 
-	if (hp->ops->notifier_del)
-			hp->ops->notifier_del(hp, hp->data);
+	if (hp->ops->notifier_hangup)
+			hp->ops->notifier_hangup(hp, hp->data);
 
 	while(temp_open_count) {
 		--temp_open_count;
@@ -431,7 +437,7 @@
  * Push buffered characters whether they were just recently buffered or waiting
  * on a blocked hypervisor.  Call this function with hp->lock held.
  */
-static void hvc_push(struct hvc_struct *hp)
+static int hvc_push(struct hvc_struct *hp)
 {
 	int n;
 
@@ -439,7 +445,7 @@
 	if (n <= 0) {
 		if (n == 0) {
 			hp->do_wakeup = 1;
-			return;
+			return 0;
 		}
 		/* throw away output on error; this happens when
 		   there is no session connected to the vterm. */
@@ -450,6 +456,8 @@
 		memmove(hp->outbuf, hp->outbuf + n, hp->n_outbuf);
 	else
 		hp->do_wakeup = 1;
+
+	return n;
 }
 
 static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count)
@@ -492,6 +500,39 @@
 	return written;
 }
 
+/**
+ * hvc_set_winsz() - Resize the hvc tty terminal window.
+ * @work:	work structure.
+ *
+ * The routine shall not be called within an atomic context because it
+ * might sleep.
+ *
+ * Locking:	hp->lock
+ */
+static void hvc_set_winsz(struct work_struct *work)
+{
+	struct hvc_struct *hp;
+	unsigned long hvc_flags;
+	struct tty_struct *tty;
+	struct winsize ws;
+
+	hp = container_of(work, struct hvc_struct, tty_resize);
+	if (!hp)
+		return;
+
+	spin_lock_irqsave(&hp->lock, hvc_flags);
+	if (!hp->tty) {
+		spin_unlock_irqrestore(&hp->lock, hvc_flags);
+		return;
+	}
+	ws  = hp->ws;
+	tty = tty_kref_get(hp->tty);
+	spin_unlock_irqrestore(&hp->lock, hvc_flags);
+
+	tty_do_resize(tty, tty, &ws);
+	tty_kref_put(tty);
+}
+
 /*
  * This is actually a contract between the driver and the tty layer outlining
  * how much write room the driver can guarantee will be sent OR BUFFERED.  This
@@ -538,16 +579,20 @@
 	char buf[N_INBUF] __ALIGNED__;
 	unsigned long flags;
 	int read_total = 0;
+	int written_total = 0;
 
 	spin_lock_irqsave(&hp->lock, flags);
 
 	/* Push pending writes */
 	if (hp->n_outbuf > 0)
-		hvc_push(hp);
+		written_total = hvc_push(hp);
 
 	/* Reschedule us if still some write pending */
-	if (hp->n_outbuf > 0)
+	if (hp->n_outbuf > 0) {
 		poll_mask |= HVC_POLL_WRITE;
+		/* If hvc_push() was not able to write, sleep a few msecs */
+		timeout = (written_total) ? 0 : MIN_TIMEOUT;
+	}
 
 	/* No tty attached, just skip */
 	tty = hp->tty;
@@ -632,6 +677,24 @@
 }
 EXPORT_SYMBOL_GPL(hvc_poll);
 
+/**
+ * hvc_resize() - Update terminal window size information.
+ * @hp:		HVC console pointer
+ * @ws:		Terminal window size structure
+ *
+ * Stores the specified window size information in the hvc structure of @hp.
+ * The function schedule the tty resize update.
+ *
+ * Locking:	Locking free; the function MUST be called holding hp->lock
+ */
+void hvc_resize(struct hvc_struct *hp, struct winsize ws)
+{
+	if ((hp->ws.ws_row != ws.ws_row) || (hp->ws.ws_col != ws.ws_col)) {
+		hp->ws = ws;
+		schedule_work(&hp->tty_resize);
+	}
+}
+
 /*
  * This kthread is either polling or interrupt driven.  This is determined by
  * calling hvc_poll() who determines whether a console adapter support
@@ -659,10 +722,6 @@
 			poll_mask |= HVC_POLL_READ;
 		if (hvc_kicked)
 			continue;
-		if (poll_mask & HVC_POLL_WRITE) {
-			yield();
-			continue;
-		}
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (!hvc_kicked) {
 			if (poll_mask == 0)
@@ -718,6 +777,7 @@
 
 	kref_init(&hp->kref);
 
+	INIT_WORK(&hp->tty_resize, hvc_set_winsz);
 	spin_lock_init(&hp->lock);
 	spin_lock(&hvc_structs_lock);
 
@@ -743,7 +803,7 @@
 }
 EXPORT_SYMBOL_GPL(hvc_alloc);
 
-int __devexit hvc_remove(struct hvc_struct *hp)
+int hvc_remove(struct hvc_struct *hp)
 {
 	unsigned long flags;
 	struct tty_struct *tty;
@@ -796,7 +856,7 @@
 	drv->minor_start = HVC_MINOR;
 	drv->type = TTY_DRIVER_TYPE_SYSTEM;
 	drv->init_termios = tty_std_termios;
-	drv->flags = TTY_DRIVER_REAL_RAW;
+	drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS;
 	tty_set_operations(drv, &hvc_ops);
 
 	/* Always start the kthread because there can be hotplug vty adapters
diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h
index 9790201..8297dbc 100644
--- a/drivers/char/hvc_console.h
+++ b/drivers/char/hvc_console.h
@@ -27,6 +27,7 @@
 #ifndef HVC_CONSOLE_H
 #define HVC_CONSOLE_H
 #include <linux/kref.h>
+#include <linux/tty.h>
 
 /*
  * This is the max number of console adapters that can/will be found as
@@ -56,6 +57,8 @@
 	struct hv_ops *ops;
 	int irq_requested;
 	int data;
+	struct winsize ws;
+	struct work_struct tty_resize;
 	struct list_head next;
 	struct kref kref; /* ref count & hvc_struct lifetime */
 };
@@ -65,9 +68,10 @@
 	int (*get_chars)(uint32_t vtermno, char *buf, int count);
 	int (*put_chars)(uint32_t vtermno, const char *buf, int count);
 
-	/* Callbacks for notification. Called in open and close */
+	/* Callbacks for notification. Called in open, close and hangup */
 	int (*notifier_add)(struct hvc_struct *hp, int irq);
 	void (*notifier_del)(struct hvc_struct *hp, int irq);
+	void (*notifier_hangup)(struct hvc_struct *hp, int irq);
 };
 
 /* Register a vterm and a slot index for use as a console (console_init) */
@@ -77,15 +81,19 @@
 extern struct hvc_struct * __devinit hvc_alloc(uint32_t vtermno, int data,
 				struct hv_ops *ops, int outbuf_size);
 /* remove a vterm from hvc tty operation (module_exit or hotplug remove) */
-extern int __devexit hvc_remove(struct hvc_struct *hp);
+extern int hvc_remove(struct hvc_struct *hp);
 
 /* data available */
 int hvc_poll(struct hvc_struct *hp);
 void hvc_kick(void);
 
+/* Resize hvc tty terminal window */
+extern void hvc_resize(struct hvc_struct *hp, struct winsize ws);
+
 /* default notifier for irq based notification */
 extern int notifier_add_irq(struct hvc_struct *hp, int data);
 extern void notifier_del_irq(struct hvc_struct *hp, int data);
+extern void notifier_hangup_irq(struct hvc_struct *hp, int data);
 
 
 #if defined(CONFIG_XMON) && defined(CONFIG_SMP)
diff --git a/drivers/char/hvc_irq.c b/drivers/char/hvc_irq.c
index 73a59cd..d09e568 100644
--- a/drivers/char/hvc_irq.c
+++ b/drivers/char/hvc_irq.c
@@ -42,3 +42,8 @@
 	free_irq(irq, hp);
 	hp->irq_requested = 0;
 }
+
+void notifier_hangup_irq(struct hvc_struct *hp, int irq)
+{
+	notifier_del_irq(hp, irq);
+}
diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c
index b71c610..b74a2f8 100644
--- a/drivers/char/hvc_iseries.c
+++ b/drivers/char/hvc_iseries.c
@@ -202,6 +202,7 @@
 	.put_chars = put_chars,
 	.notifier_add = notifier_add_irq,
 	.notifier_del = notifier_del_irq,
+	.notifier_hangup = notifier_hangup_irq,
 };
 
 static int __devinit hvc_vio_probe(struct vio_dev *vdev,
diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c
index 93f3840..019e0b5 100644
--- a/drivers/char/hvc_vio.c
+++ b/drivers/char/hvc_vio.c
@@ -82,6 +82,7 @@
 	.put_chars = hvc_put_chars,
 	.notifier_add = notifier_add_irq,
 	.notifier_del = notifier_del_irq,
+	.notifier_hangup = notifier_hangup_irq,
 };
 
 static int __devinit hvc_vio_probe(struct vio_dev *vdev,
diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c
index 538ceea..eba999f 100644
--- a/drivers/char/hvc_xen.c
+++ b/drivers/char/hvc_xen.c
@@ -102,6 +102,7 @@
 	.put_chars = write_console,
 	.notifier_add = notifier_add_irq,
 	.notifier_del = notifier_del_irq,
+	.notifier_hangup = notifier_hangup_irq,
 };
 
 static int __init xen_init(void)
diff --git a/drivers/char/hw_random/amd-rng.c b/drivers/char/hw_random/amd-rng.c
index c422e87..cd0ba51 100644
--- a/drivers/char/hw_random/amd-rng.c
+++ b/drivers/char/hw_random/amd-rng.c
@@ -11,7 +11,7 @@
  * derived from
  *
  * Hardware driver for the AMD 768 Random Number Generator (RNG)
- * (c) Copyright 2001 Red Hat Inc <alan@redhat.com>
+ * (c) Copyright 2001 Red Hat Inc
  *
  * derived from
  *
diff --git a/drivers/char/hw_random/geode-rng.c b/drivers/char/hw_random/geode-rng.c
index fed4ef5..64d513f6 100644
--- a/drivers/char/hw_random/geode-rng.c
+++ b/drivers/char/hw_random/geode-rng.c
@@ -11,7 +11,7 @@
  * derived from
  *
  * Hardware driver for the AMD 768 Random Number Generator (RNG)
- * (c) Copyright 2001 Red Hat Inc <alan@redhat.com>
+ * (c) Copyright 2001 Red Hat Inc
  *
  * derived from
  *
diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c
index 8a2fce0..5dcbe60 100644
--- a/drivers/char/hw_random/intel-rng.c
+++ b/drivers/char/hw_random/intel-rng.c
@@ -11,7 +11,7 @@
  * derived from
  *
  * Hardware driver for the AMD 768 Random Number Generator (RNG)
- * (c) Copyright 2001 Red Hat Inc <alan@redhat.com>
+ * (c) Copyright 2001 Red Hat Inc
  *
  * derived from
  *
diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c
index 128202e..4e9573c 100644
--- a/drivers/char/hw_random/via-rng.c
+++ b/drivers/char/hw_random/via-rng.c
@@ -11,7 +11,7 @@
  * derived from
  *
  * Hardware driver for the AMD 768 Random Number Generator (RNG)
- * (c) Copyright 2001 Red Hat Inc <alan@redhat.com>
+ * (c) Copyright 2001 Red Hat Inc
  *
  * derived from
  *
diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c
index 39f6357..8054ee8 100644
--- a/drivers/char/nvram.c
+++ b/drivers/char/nvram.c
@@ -338,7 +338,7 @@
 
 	if ((nvram_open_cnt && (file->f_flags & O_EXCL)) ||
 	    (nvram_open_mode & NVRAM_EXCL) ||
-	    ((file->f_mode & 2) && (nvram_open_mode & NVRAM_WRITE))) {
+	    ((file->f_mode & FMODE_WRITE) && (nvram_open_mode & NVRAM_WRITE))) {
 		spin_unlock(&nvram_state_lock);
 		unlock_kernel();
 		return -EBUSY;
@@ -346,7 +346,7 @@
 
 	if (file->f_flags & O_EXCL)
 		nvram_open_mode |= NVRAM_EXCL;
-	if (file->f_mode & 2)
+	if (file->f_mode & FMODE_WRITE)
 		nvram_open_mode |= NVRAM_WRITE;
 	nvram_open_cnt++;
 
@@ -366,7 +366,7 @@
 	/* if only one instance is open, clear the EXCL bit */
 	if (nvram_open_mode & NVRAM_EXCL)
 		nvram_open_mode &= ~NVRAM_EXCL;
-	if (file->f_mode & 2)
+	if (file->f_mode & FMODE_WRITE)
 		nvram_open_mode &= ~NVRAM_WRITE;
 
 	spin_unlock(&nvram_state_lock);
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index e139372..96adf28 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -65,7 +65,7 @@
 	if (!bdev)
 		goto out;
 	igrab(bdev->bd_inode);
-	err = blkdev_get(bdev, filp->f_mode, 0);
+	err = blkdev_get(bdev, filp->f_mode);
 	if (err)
 		goto out;
 	err = bd_claim(bdev, raw_open);
@@ -87,7 +87,7 @@
 out2:
 	bd_release(bdev);
 out1:
-	blkdev_put(bdev);
+	blkdev_put(bdev, filp->f_mode);
 out:
 	mutex_unlock(&raw_mutex);
 	return err;
@@ -112,7 +112,7 @@
 	mutex_unlock(&raw_mutex);
 
 	bd_release(bdev);
-	blkdev_put(bdev);
+	blkdev_put(bdev, filp->f_mode);
 	return 0;
 }
 
@@ -125,7 +125,7 @@
 {
 	struct block_device *bdev = filp->private_data;
 
-	return blkdev_ioctl(bdev->bd_inode, NULL, command, arg);
+	return blkdev_ioctl(bdev, 0, command, arg);
 }
 
 static void bind_device(struct raw_config_request *rq)
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index 553b0e9..c8f8024 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -90,7 +90,7 @@
 	spin_lock_irqsave(&port->lock, flags);
 	if (port->tty)
 		tty_kref_put(port->tty);
-	port->tty = tty;
+	port->tty = tty_kref_get(tty);
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 EXPORT_SYMBOL(tty_port_tty_set);
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index d0f4eb6..3fb0d2c 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -198,6 +198,7 @@
 	virtio_cons.put_chars = put_chars;
 	virtio_cons.notifier_add = notifier_add_vio;
 	virtio_cons.notifier_del = notifier_del_vio;
+	virtio_cons.notifier_hangup = notifier_del_vio;
 
 	/* The first argument of hvc_alloc() is the virtual console number, so
 	 * we use zero.  The second argument is the parameter for the
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 5ce07b5..5bed733 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -16,6 +16,7 @@
 #include <linux/cpu.h>
 #include <linux/cpuidle.h>
 #include <linux/ktime.h>
+#include <linux/hrtimer.h>
 
 #include "cpuidle.h"
 
@@ -56,10 +57,20 @@
 		if (pm_idle_old)
 			pm_idle_old();
 		else
+#if defined(CONFIG_ARCH_HAS_DEFAULT_IDLE)
+			default_idle();
+#else
 			local_irq_enable();
+#endif
 		return;
 	}
 
+	/*
+	 * run any timers that can be run now, at this point
+	 * before calculating the idle duration etc.
+	 */
+	hrtimer_peek_ahead_timers();
+
 	/* ask the governor for the next state */
 	next_state = cpuidle_curr_governor->select(dev);
 	if (need_resched())
@@ -67,8 +78,11 @@
 	target_state = &dev->states[next_state];
 
 	/* enter the state and update stats */
-	dev->last_residency = target_state->enter(dev, target_state);
 	dev->last_state = target_state;
+	dev->last_residency = target_state->enter(dev, target_state);
+	if (dev->last_state)
+		target_state = dev->last_state;
+
 	target_state->time += (unsigned long long)dev->last_residency;
 	target_state->usage++;
 
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index 1ef68b3..b0438c4 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -33,6 +33,7 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/workqueue.h>
+#include <linux/i7300_idle.h>
 #include "ioatdma.h"
 #include "ioatdma_registers.h"
 #include "ioatdma_hw.h"
@@ -171,6 +172,11 @@
 	xfercap_scale = readb(device->reg_base + IOAT_XFERCAP_OFFSET);
 	xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale));
 
+#ifdef  CONFIG_I7300_IDLE_IOAT_CHANNEL
+	if (i7300_idle_platform_probe(NULL, NULL) == 0) {
+		device->common.chancnt--;
+	}
+#endif
 	for (i = 0; i < device->common.chancnt; i++) {
 		ioat_chan = kzalloc(sizeof(*ioat_chan), GFP_KERNEL);
 		if (!ioat_chan) {
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index dbd42d6..7f2ee27 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -127,6 +127,13 @@
 	  This driver provides an in-kernel interface to those GPIOs using
 	  platform-neutral GPIO calls.
 
+config GPIO_TWL4030
+	tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
+	depends on TWL4030_CORE
+	help
+	  Say yes here to access the GPIO signals of various multi-function
+	  power management chips from Texas Instruments.
+
 comment "PCI GPIO expanders:"
 
 config GPIO_BT8XX
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 01b4bbd..6aafdeb 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -9,4 +9,5 @@
 obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
 obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
+obj-$(CONFIG_GPIO_TWL4030)	+= twl4030-gpio.o
 obj-$(CONFIG_GPIO_BT8XX)	+= bt8xxgpio.o
diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c
new file mode 100644
index 0000000..37d3eec
--- /dev/null
+++ b/drivers/gpio/twl4030-gpio.c
@@ -0,0 +1,521 @@
+/*
+ * twl4030_gpio.c -- access to GPIOs on TWL4030/TPS659x0 chips
+ *
+ * Copyright (C) 2006-2007 Texas Instruments, Inc.
+ * Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * Code re-arranged and cleaned up by:
+ *	Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * Initial Code:
+ *	Andy Lowe / Nishanth Menon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kthread.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/i2c/twl4030.h>
+
+
+/*
+ * The GPIO "subchip" supports 18 GPIOs which can be configured as
+ * inputs or outputs, with pullups or pulldowns on each pin.  Each
+ * GPIO can trigger interrupts on either or both edges.
+ *
+ * GPIO interrupts can be fed to either of two IRQ lines; this is
+ * intended to support multiple hosts.
+ *
+ * There are also two LED pins used sometimes as output-only GPIOs.
+ */
+
+
+static struct gpio_chip twl_gpiochip;
+static int twl4030_gpio_irq_base;
+
+/* genirq interfaces are not available to modules */
+#ifdef MODULE
+#define is_module()	true
+#else
+#define is_module()	false
+#endif
+
+/* GPIO_CTRL Fields */
+#define MASK_GPIO_CTRL_GPIO0CD1		BIT(0)
+#define MASK_GPIO_CTRL_GPIO1CD2		BIT(1)
+#define MASK_GPIO_CTRL_GPIO_ON		BIT(2)
+
+/* Mask for GPIO registers when aggregated into a 32-bit integer */
+#define GPIO_32_MASK			0x0003ffff
+
+/* Data structures */
+static DEFINE_MUTEX(gpio_lock);
+
+/* store usage of each GPIO. - each bit represents one GPIO */
+static unsigned int gpio_usage_count;
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * To configure TWL4030 GPIO module registers
+ */
+static inline int gpio_twl4030_write(u8 address, u8 data)
+{
+	return twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, data, address);
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * LED register offsets (use TWL4030_MODULE_{LED,PWMA,PWMB}))
+ * PWMs A and B are dedicated to LEDs A and B, respectively.
+ */
+
+#define TWL4030_LED_LEDEN	0x0
+
+/* LEDEN bits */
+#define LEDEN_LEDAON		BIT(0)
+#define LEDEN_LEDBON		BIT(1)
+#define LEDEN_LEDAEXT		BIT(2)
+#define LEDEN_LEDBEXT		BIT(3)
+#define LEDEN_LEDAPWM		BIT(4)
+#define LEDEN_LEDBPWM		BIT(5)
+#define LEDEN_PWM_LENGTHA	BIT(6)
+#define LEDEN_PWM_LENGTHB	BIT(7)
+
+#define TWL4030_PWMx_PWMxON	0x0
+#define TWL4030_PWMx_PWMxOFF	0x1
+
+#define PWMxON_LENGTH		BIT(7)
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * To read a TWL4030 GPIO module register
+ */
+static inline int gpio_twl4030_read(u8 address)
+{
+	u8 data;
+	int ret = 0;
+
+	ret = twl4030_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address);
+	return (ret < 0) ? ret : data;
+}
+
+/*----------------------------------------------------------------------*/
+
+static u8 cached_leden;		/* protected by gpio_lock */
+
+/* The LED lines are open drain outputs ... a FET pulls to GND, so an
+ * external pullup is needed.  We could also expose the integrated PWM
+ * as a LED brightness control; we initialize it as "always on".
+ */
+static void twl4030_led_set_value(int led, int value)
+{
+	u8 mask = LEDEN_LEDAON | LEDEN_LEDAPWM;
+	int status;
+
+	if (led)
+		mask <<= 1;
+
+	mutex_lock(&gpio_lock);
+	if (value)
+		cached_leden &= ~mask;
+	else
+		cached_leden |= mask;
+	status = twl4030_i2c_write_u8(TWL4030_MODULE_LED, cached_leden,
+			TWL4030_LED_LEDEN);
+	mutex_unlock(&gpio_lock);
+}
+
+static int twl4030_set_gpio_direction(int gpio, int is_input)
+{
+	u8 d_bnk = gpio >> 3;
+	u8 d_msk = BIT(gpio & 0x7);
+	u8 reg = 0;
+	u8 base = REG_GPIODATADIR1 + d_bnk;
+	int ret = 0;
+
+	mutex_lock(&gpio_lock);
+	ret = gpio_twl4030_read(base);
+	if (ret >= 0) {
+		if (is_input)
+			reg = ret & ~d_msk;
+		else
+			reg = ret | d_msk;
+
+		ret = gpio_twl4030_write(base, reg);
+	}
+	mutex_unlock(&gpio_lock);
+	return ret;
+}
+
+static int twl4030_set_gpio_dataout(int gpio, int enable)
+{
+	u8 d_bnk = gpio >> 3;
+	u8 d_msk = BIT(gpio & 0x7);
+	u8 base = 0;
+
+	if (enable)
+		base = REG_SETGPIODATAOUT1 + d_bnk;
+	else
+		base = REG_CLEARGPIODATAOUT1 + d_bnk;
+
+	return gpio_twl4030_write(base, d_msk);
+}
+
+static int twl4030_get_gpio_datain(int gpio)
+{
+	u8 d_bnk = gpio >> 3;
+	u8 d_off = gpio & 0x7;
+	u8 base = 0;
+	int ret = 0;
+
+	if (unlikely((gpio >= TWL4030_GPIO_MAX)
+		|| !(gpio_usage_count & BIT(gpio))))
+		return -EPERM;
+
+	base = REG_GPIODATAIN1 + d_bnk;
+	ret = gpio_twl4030_read(base);
+	if (ret > 0)
+		ret = (ret >> d_off) & 0x1;
+
+	return ret;
+}
+
+/*
+ * Configure debounce timing value for a GPIO pin on TWL4030
+ */
+int twl4030_set_gpio_debounce(int gpio, int enable)
+{
+	u8 d_bnk = gpio >> 3;
+	u8 d_msk = BIT(gpio & 0x7);
+	u8 reg = 0;
+	u8 base = 0;
+	int ret = 0;
+
+	if (unlikely((gpio >= TWL4030_GPIO_MAX)
+		|| !(gpio_usage_count & BIT(gpio))))
+		return -EPERM;
+
+	base = REG_GPIO_DEBEN1 + d_bnk;
+	mutex_lock(&gpio_lock);
+	ret = gpio_twl4030_read(base);
+	if (ret >= 0) {
+		if (enable)
+			reg = ret | d_msk;
+		else
+			reg = ret & ~d_msk;
+
+		ret = gpio_twl4030_write(base, reg);
+	}
+	mutex_unlock(&gpio_lock);
+	return ret;
+}
+EXPORT_SYMBOL(twl4030_set_gpio_debounce);
+
+/*----------------------------------------------------------------------*/
+
+static int twl_request(struct gpio_chip *chip, unsigned offset)
+{
+	int status = 0;
+
+	mutex_lock(&gpio_lock);
+
+	/* Support the two LED outputs as output-only GPIOs. */
+	if (offset >= TWL4030_GPIO_MAX) {
+		u8	ledclr_mask = LEDEN_LEDAON | LEDEN_LEDAEXT
+				| LEDEN_LEDAPWM | LEDEN_PWM_LENGTHA;
+		u8	module = TWL4030_MODULE_PWMA;
+
+		offset -= TWL4030_GPIO_MAX;
+		if (offset) {
+			ledclr_mask <<= 1;
+			module = TWL4030_MODULE_PWMB;
+		}
+
+		/* initialize PWM to always-drive */
+		status = twl4030_i2c_write_u8(module, 0x7f,
+				TWL4030_PWMx_PWMxOFF);
+		if (status < 0)
+			goto done;
+		status = twl4030_i2c_write_u8(module, 0x7f,
+				TWL4030_PWMx_PWMxON);
+		if (status < 0)
+			goto done;
+
+		/* init LED to not-driven (high) */
+		module = TWL4030_MODULE_LED;
+		status = twl4030_i2c_read_u8(module, &cached_leden,
+				TWL4030_LED_LEDEN);
+		if (status < 0)
+			goto done;
+		cached_leden &= ~ledclr_mask;
+		status = twl4030_i2c_write_u8(module, cached_leden,
+				TWL4030_LED_LEDEN);
+		if (status < 0)
+			goto done;
+
+		status = 0;
+		goto done;
+	}
+
+	/* on first use, turn GPIO module "on" */
+	if (!gpio_usage_count) {
+		struct twl4030_gpio_platform_data *pdata;
+		u8 value = MASK_GPIO_CTRL_GPIO_ON;
+
+		/* optionally have the first two GPIOs switch vMMC1
+		 * and vMMC2 power supplies based on card presence.
+		 */
+		pdata = chip->dev->platform_data;
+		value |= pdata->mmc_cd & 0x03;
+
+		status = gpio_twl4030_write(REG_GPIO_CTRL, value);
+	}
+
+	if (!status)
+		gpio_usage_count |= (0x1 << offset);
+
+done:
+	mutex_unlock(&gpio_lock);
+	return status;
+}
+
+static void twl_free(struct gpio_chip *chip, unsigned offset)
+{
+	if (offset >= TWL4030_GPIO_MAX) {
+		twl4030_led_set_value(offset - TWL4030_GPIO_MAX, 1);
+		return;
+	}
+
+	mutex_lock(&gpio_lock);
+
+	gpio_usage_count &= ~BIT(offset);
+
+	/* on last use, switch off GPIO module */
+	if (!gpio_usage_count)
+		gpio_twl4030_write(REG_GPIO_CTRL, 0x0);
+
+	mutex_unlock(&gpio_lock);
+}
+
+static int twl_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	return (offset < TWL4030_GPIO_MAX)
+		? twl4030_set_gpio_direction(offset, 1)
+		: -EINVAL;
+}
+
+static int twl_get(struct gpio_chip *chip, unsigned offset)
+{
+	int status = 0;
+
+	if (offset < TWL4030_GPIO_MAX)
+		status = twl4030_get_gpio_datain(offset);
+	else if (offset == TWL4030_GPIO_MAX)
+		status = cached_leden & LEDEN_LEDAON;
+	else
+		status = cached_leden & LEDEN_LEDBON;
+	return (status < 0) ? 0 : status;
+}
+
+static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value)
+{
+	if (offset < TWL4030_GPIO_MAX) {
+		twl4030_set_gpio_dataout(offset, value);
+		return twl4030_set_gpio_direction(offset, 0);
+	} else {
+		twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value);
+		return 0;
+	}
+}
+
+static void twl_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	if (offset < TWL4030_GPIO_MAX)
+		twl4030_set_gpio_dataout(offset, value);
+	else
+		twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value);
+}
+
+static int twl_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	return (twl4030_gpio_irq_base && (offset < TWL4030_GPIO_MAX))
+		? (twl4030_gpio_irq_base + offset)
+		: -EINVAL;
+}
+
+static struct gpio_chip twl_gpiochip = {
+	.label			= "twl4030",
+	.owner			= THIS_MODULE,
+	.request		= twl_request,
+	.free			= twl_free,
+	.direction_input	= twl_direction_in,
+	.get			= twl_get,
+	.direction_output	= twl_direction_out,
+	.set			= twl_set,
+	.to_irq			= twl_to_irq,
+	.can_sleep		= 1,
+};
+
+/*----------------------------------------------------------------------*/
+
+static int __devinit gpio_twl4030_pulls(u32 ups, u32 downs)
+{
+	u8		message[6];
+	unsigned	i, gpio_bit;
+
+	/* For most pins, a pulldown was enabled by default.
+	 * We should have data that's specific to this board.
+	 */
+	for (gpio_bit = 1, i = 1; i < 6; i++) {
+		u8		bit_mask;
+		unsigned	j;
+
+		for (bit_mask = 0, j = 0; j < 8; j += 2, gpio_bit <<= 1) {
+			if (ups & gpio_bit)
+				bit_mask |= 1 << (j + 1);
+			else if (downs & gpio_bit)
+				bit_mask |= 1 << (j + 0);
+		}
+		message[i] = bit_mask;
+	}
+
+	return twl4030_i2c_write(TWL4030_MODULE_GPIO, message,
+				REG_GPIOPUPDCTR1, 5);
+}
+
+static int gpio_twl4030_remove(struct platform_device *pdev);
+
+static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
+{
+	struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
+	int ret;
+
+	/* maybe setup IRQs */
+	if (pdata->irq_base) {
+		if (is_module()) {
+			dev_err(&pdev->dev,
+				"can't dispatch IRQs from modules\n");
+			goto no_irqs;
+		}
+		ret = twl4030_sih_setup(TWL4030_MODULE_GPIO);
+		if (ret < 0)
+			return ret;
+		WARN_ON(ret != pdata->irq_base);
+		twl4030_gpio_irq_base = ret;
+	}
+
+no_irqs:
+	/*
+	 * NOTE:  boards may waste power if they don't set pullups
+	 * and pulldowns correctly ... default for non-ULPI pins is
+	 * pulldown, and some other pins may have external pullups
+	 * or pulldowns.  Careful!
+	 */
+	ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
+	if (ret)
+		dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
+				pdata->pullups, pdata->pulldowns,
+				ret);
+
+	twl_gpiochip.base = pdata->gpio_base;
+	twl_gpiochip.ngpio = TWL4030_GPIO_MAX;
+	twl_gpiochip.dev = &pdev->dev;
+
+	/* NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
+	 * is (still) clear if use_leds is set.
+	 */
+	if (pdata->use_leds)
+		twl_gpiochip.ngpio += 2;
+
+	ret = gpiochip_add(&twl_gpiochip);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+				"could not register gpiochip, %d\n",
+				ret);
+		twl_gpiochip.ngpio = 0;
+		gpio_twl4030_remove(pdev);
+	} else if (pdata->setup) {
+		int status;
+
+		status = pdata->setup(&pdev->dev,
+				pdata->gpio_base, TWL4030_GPIO_MAX);
+		if (status)
+			dev_dbg(&pdev->dev, "setup --> %d\n", status);
+	}
+
+	return ret;
+}
+
+static int __devexit gpio_twl4030_remove(struct platform_device *pdev)
+{
+	struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
+	int status;
+
+	if (pdata->teardown) {
+		status = pdata->teardown(&pdev->dev,
+				pdata->gpio_base, TWL4030_GPIO_MAX);
+		if (status) {
+			dev_dbg(&pdev->dev, "teardown --> %d\n", status);
+			return status;
+		}
+	}
+
+	status = gpiochip_remove(&twl_gpiochip);
+	if (status < 0)
+		return status;
+
+	if (is_module())
+		return 0;
+
+	/* REVISIT no support yet for deregistering all the IRQs */
+	WARN_ON(1);
+	return -EIO;
+}
+
+/* Note:  this hardware lives inside an I2C-based multi-function device. */
+MODULE_ALIAS("platform:twl4030_gpio");
+
+static struct platform_driver gpio_twl4030_driver = {
+	.driver.name	= "twl4030_gpio",
+	.driver.owner	= THIS_MODULE,
+	.probe		= gpio_twl4030_probe,
+	.remove		= __devexit_p(gpio_twl4030_remove),
+};
+
+static int __init gpio_twl4030_init(void)
+{
+	return platform_driver_register(&gpio_twl4030_driver);
+}
+subsys_initcall(gpio_twl4030_init);
+
+static void __exit gpio_twl4030_exit(void)
+{
+	platform_driver_unregister(&gpio_twl4030_driver);
+}
+module_exit(gpio_twl4030_exit);
+
+MODULE_AUTHOR("Texas Instruments, Inc.");
+MODULE_DESCRIPTION("GPIO interface for TWL4030");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/drm_drawable.c b/drivers/gpu/drm/drm_drawable.c
index 1839c57..80be1ca 100644
--- a/drivers/gpu/drm/drm_drawable.c
+++ b/drivers/gpu/drm/drm_drawable.c
@@ -76,11 +76,18 @@
 {
 	struct drm_draw *draw = data;
 	unsigned long irqflags;
+	struct drm_drawable_info *info;
 
 	spin_lock_irqsave(&dev->drw_lock, irqflags);
 
-	drm_free(drm_get_drawable_info(dev, draw->handle),
-		 sizeof(struct drm_drawable_info), DRM_MEM_BUFS);
+	info = drm_get_drawable_info(dev, draw->handle);
+	if (info == NULL) {
+		spin_unlock_irqrestore(&dev->drw_lock, irqflags);
+		return -EINVAL;
+	}
+	drm_free(info->rects, info->num_rects * sizeof(struct drm_clip_rect),
+			DRM_MEM_BUFS);
+	drm_free(info, sizeof(struct drm_drawable_info), DRM_MEM_BUFS);
 
 	idr_remove(&dev->drw_idr, draw->handle);
 
@@ -111,7 +118,9 @@
 
 	switch (update->type) {
 	case DRM_DRAWABLE_CLIPRECTS:
-		if (update->num != info->num_rects) {
+		if (update->num == 0)
+			rects = NULL;
+		else if (update->num != info->num_rects) {
 			rects = drm_alloc(update->num * sizeof(struct drm_clip_rect),
 					 DRM_MEM_BUFS);
 		} else
diff --git a/drivers/gpu/drm/drm_ioc32.c b/drivers/gpu/drm/drm_ioc32.c
index 90f5a8d..920b72f 100644
--- a/drivers/gpu/drm/drm_ioc32.c
+++ b/drivers/gpu/drm/drm_ioc32.c
@@ -64,6 +64,8 @@
 #define DRM_IOCTL_SG_ALLOC32		DRM_IOW( 0x38, drm_scatter_gather32_t)
 #define DRM_IOCTL_SG_FREE32		DRM_IOW( 0x39, drm_scatter_gather32_t)
 
+#define DRM_IOCTL_UPDATE_DRAW32		DRM_IOW( 0x3f, drm_update_draw32_t)
+
 #define DRM_IOCTL_WAIT_VBLANK32		DRM_IOWR(0x3a, drm_wait_vblank32_t)
 
 typedef struct drm_version_32 {
@@ -952,6 +954,37 @@
 			 DRM_IOCTL_SG_FREE, (unsigned long)request);
 }
 
+typedef struct drm_update_draw32 {
+	drm_drawable_t handle;
+	unsigned int type;
+	unsigned int num;
+	/* 64-bit version has a 32-bit pad here */
+	u64 data;	/**< Pointer */
+} __attribute__((packed)) drm_update_draw32_t;
+
+static int compat_drm_update_draw(struct file *file, unsigned int cmd,
+				  unsigned long arg)
+{
+	drm_update_draw32_t update32;
+	struct drm_update_draw __user *request;
+	int err;
+
+	if (copy_from_user(&update32, (void __user *)arg, sizeof(update32)))
+		return -EFAULT;
+
+	request = compat_alloc_user_space(sizeof(*request));
+	if (!access_ok(VERIFY_WRITE, request, sizeof(*request)) ||
+	    __put_user(update32.handle, &request->handle) ||
+	    __put_user(update32.type, &request->type) ||
+	    __put_user(update32.num, &request->num) ||
+	    __put_user(update32.data, &request->data))
+		return -EFAULT;
+
+	err = drm_ioctl(file->f_path.dentry->d_inode, file,
+			DRM_IOCTL_UPDATE_DRAW, (unsigned long)request);
+	return err;
+}
+
 struct drm_wait_vblank_request32 {
 	enum drm_vblank_seq_type type;
 	unsigned int sequence;
@@ -1033,6 +1066,7 @@
 #endif
 	[DRM_IOCTL_NR(DRM_IOCTL_SG_ALLOC32)] = compat_drm_sg_alloc,
 	[DRM_IOCTL_NR(DRM_IOCTL_SG_FREE32)] = compat_drm_sg_free,
+	[DRM_IOCTL_NR(DRM_IOCTL_UPDATE_DRAW32)] = compat_drm_update_draw,
 	[DRM_IOCTL_NR(DRM_IOCTL_WAIT_VBLANK32)] = compat_drm_wait_vblank,
 };
 
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 4091b9e..212a94f7 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -594,11 +594,14 @@
 			goto done;
 		}
 
+		/* Get a refcount on the vblank, which will be released by
+		 * drm_vbl_send_signals().
+		 */
 		ret = drm_vblank_get(dev, crtc);
 		if (ret) {
 			drm_free(vbl_sig, sizeof(struct drm_vbl_sig),
 				 DRM_MEM_DRIVER);
-			return ret;
+			goto done;
 		}
 
 		atomic_inc(&dev->vbl_signal_pending);
diff --git a/drivers/gpu/drm/drm_lock.c b/drivers/gpu/drm/drm_lock.c
index a4caf95..888159e 100644
--- a/drivers/gpu/drm/drm_lock.c
+++ b/drivers/gpu/drm/drm_lock.c
@@ -232,6 +232,7 @@
 	}
 	return 0;
 }
+EXPORT_SYMBOL(drm_lock_take);
 
 /**
  * This takes a lock forcibly and hands it to context.	Should ONLY be used
@@ -299,6 +300,7 @@
 	wake_up_interruptible(&lock_data->lock_queue);
 	return 0;
 }
+EXPORT_SYMBOL(drm_lock_free);
 
 /**
  * If we get here, it means that the process has called DRM_IOCTL_LOCK
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index db34780e..01de536 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -844,8 +844,11 @@
 	 * correctly in testing on 945G.
 	 * This may be a side effect of MSI having been made available for PEG
 	 * and the registers being closely associated.
+	 *
+	 * According to chipset errata, on the 965GM, MSI interrupts may
+	 * be lost or delayed
 	 */
-	if (!IS_I945G(dev) && !IS_I945GM(dev))
+	if (!IS_I945G(dev) && !IS_I945GM(dev) && !IS_I965GM(dev))
 		if (pci_enable_msi(dev->pdev))
 			DRM_ERROR("failed to enable MSI\n");
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index eae4ed3..f20ffe1 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -90,7 +90,7 @@
 typedef struct _drm_i915_vbl_swap {
 	struct list_head head;
 	drm_drawable_t drw_id;
-	unsigned int plane;
+	unsigned int pipe;
 	unsigned int sequence;
 } drm_i915_vbl_swap_t;
 
@@ -240,6 +240,9 @@
 	u8 saveDACDATA[256*3]; /* 256 3-byte colors */
 	u8 saveCR[37];
 
+	/** Work task for vblank-related ring access */
+	struct work_struct vblank_work;
+
 	struct {
 		struct drm_mm gtt_space;
 
@@ -285,9 +288,6 @@
 		 */
 		struct delayed_work retire_work;
 
-		/** Work task for vblank-related ring access */
-		struct work_struct vblank_work;
-
 		uint32_t next_gem_seqno;
 
 		/**
@@ -441,7 +441,7 @@
 void i915_user_irq_get(struct drm_device *dev);
 void i915_user_irq_put(struct drm_device *dev);
 
-extern void i915_gem_vblank_work_handler(struct work_struct *work);
+extern void i915_vblank_work_handler(struct work_struct *work);
 extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS);
 extern void i915_driver_irq_preinstall(struct drm_device * dev);
 extern int i915_driver_irq_postinstall(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index dc2e6fd..17ae330 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2564,8 +2564,6 @@
 	INIT_LIST_HEAD(&dev_priv->mm.request_list);
 	INIT_DELAYED_WORK(&dev_priv->mm.retire_work,
 			  i915_gem_retire_work_handler);
-	INIT_WORK(&dev_priv->mm.vblank_work,
-		  i915_gem_vblank_work_handler);
 	dev_priv->mm.next_gem_seqno = 1;
 
 	i915_gem_detect_bit_6_swizzle(dev);
diff --git a/drivers/gpu/drm/i915/i915_gem_proc.c b/drivers/gpu/drm/i915/i915_gem_proc.c
index 15d4160..93de15b 100644
--- a/drivers/gpu/drm/i915/i915_gem_proc.c
+++ b/drivers/gpu/drm/i915/i915_gem_proc.c
@@ -192,7 +192,12 @@
 
 	*start = &buf[offset];
 	*eof = 0;
-	DRM_PROC_PRINT("Current sequence: %d\n", i915_get_gem_seqno(dev));
+	if (dev_priv->hw_status_page != NULL) {
+		DRM_PROC_PRINT("Current sequence: %d\n",
+			       i915_get_gem_seqno(dev));
+	} else {
+		DRM_PROC_PRINT("Current sequence: hws uninitialized\n");
+	}
 	DRM_PROC_PRINT("Waiter sequence:  %d\n",
 		       dev_priv->mm.waiting_gem_seqno);
 	DRM_PROC_PRINT("IRQ sequence:     %d\n", dev_priv->mm.irq_gem_seqno);
@@ -230,8 +235,12 @@
 		       I915_READ(PIPEBSTAT));
 	DRM_PROC_PRINT("Interrupts received: %d\n",
 		       atomic_read(&dev_priv->irq_received));
-	DRM_PROC_PRINT("Current sequence:    %d\n",
-		       i915_get_gem_seqno(dev));
+	if (dev_priv->hw_status_page != NULL) {
+		DRM_PROC_PRINT("Current sequence:    %d\n",
+			       i915_get_gem_seqno(dev));
+	} else {
+		DRM_PROC_PRINT("Current sequence:    hws uninitialized\n");
+	}
 	DRM_PROC_PRINT("Waiter sequence:     %d\n",
 		       dev_priv->mm.waiting_gem_seqno);
 	DRM_PROC_PRINT("IRQ sequence:        %d\n",
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index baae511..26f4893 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -60,43 +60,6 @@
 }
 
 /**
- * i915_get_pipe - return the the pipe associated with a given plane
- * @dev: DRM device
- * @plane: plane to look for
- *
- * The Intel Mesa & 2D drivers call the vblank routines with a plane number
- * rather than a pipe number, since they may not always be equal.  This routine
- * maps the given @plane back to a pipe number.
- */
-static int
-i915_get_pipe(struct drm_device *dev, int plane)
-{
-	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	u32 dspcntr;
-
-	dspcntr = plane ? I915_READ(DSPBCNTR) : I915_READ(DSPACNTR);
-
-	return dspcntr & DISPPLANE_SEL_PIPE_MASK ? 1 : 0;
-}
-
-/**
- * i915_get_plane - return the the plane associated with a given pipe
- * @dev: DRM device
- * @pipe: pipe to look for
- *
- * The Intel Mesa & 2D drivers call the vblank routines with a plane number
- * rather than a plane number, since they may not always be equal.  This routine
- * maps the given @pipe back to a plane number.
- */
-static int
-i915_get_plane(struct drm_device *dev, int pipe)
-{
-	if (i915_get_pipe(dev, 0) == pipe)
-		return 0;
-	return 1;
-}
-
-/**
  * i915_pipe_enabled - check if a pipe is enabled
  * @dev: DRM device
  * @pipe: pipe to check
@@ -121,6 +84,9 @@
  * Emit blits for scheduled buffer swaps.
  *
  * This function will be called with the HW lock held.
+ * Because this function must grab the ring mutex (dev->struct_mutex),
+ * it can no longer run at soft irq time. We'll fix this when we do
+ * the DRI2 swap buffer work.
  */
 static void i915_vblank_tasklet(struct drm_device *dev)
 {
@@ -141,6 +107,8 @@
 	u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24);
 	RING_LOCALS;
 
+	mutex_lock(&dev->struct_mutex);
+
 	if (IS_I965G(dev) && sarea_priv->front_tiled) {
 		cmd |= XY_SRC_COPY_BLT_DST_TILED;
 		dst_pitch >>= 2;
@@ -165,7 +133,7 @@
 	list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) {
 		drm_i915_vbl_swap_t *vbl_swap =
 			list_entry(list, drm_i915_vbl_swap_t, head);
-		int pipe = i915_get_pipe(dev, vbl_swap->plane);
+		int pipe = vbl_swap->pipe;
 
 		if ((counter[pipe] - vbl_swap->sequence) > (1<<23))
 			continue;
@@ -179,20 +147,19 @@
 
 		drw = drm_get_drawable_info(dev, vbl_swap->drw_id);
 
-		if (!drw) {
-			spin_unlock(&dev->drw_lock);
-			drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
-			spin_lock(&dev_priv->swaps_lock);
-			continue;
-		}
-
 		list_for_each(hit, &hits) {
 			drm_i915_vbl_swap_t *swap_cmp =
 				list_entry(hit, drm_i915_vbl_swap_t, head);
 			struct drm_drawable_info *drw_cmp =
 				drm_get_drawable_info(dev, swap_cmp->drw_id);
 
-			if (drw_cmp &&
+			/* Make sure both drawables are still
+			 * around and have some rectangles before
+			 * we look inside to order them for the
+			 * blts below.
+			 */
+			if (drw_cmp && drw_cmp->num_rects > 0 &&
+			    drw && drw->num_rects > 0 &&
 			    drw_cmp->rects[0].y1 > drw->rects[0].y1) {
 				list_add_tail(list, hit);
 				break;
@@ -212,6 +179,7 @@
 
 	if (nhits == 0) {
 		spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
+		mutex_unlock(&dev->struct_mutex);
 		return;
 	}
 
@@ -265,18 +233,21 @@
 			drm_i915_vbl_swap_t *swap_hit =
 				list_entry(hit, drm_i915_vbl_swap_t, head);
 			struct drm_clip_rect *rect;
-			int num_rects, plane;
+			int num_rects, pipe;
 			unsigned short top, bottom;
 
 			drw = drm_get_drawable_info(dev, swap_hit->drw_id);
 
+			/* The drawable may have been destroyed since
+			 * the vblank swap was queued
+			 */
 			if (!drw)
 				continue;
 
 			rect = drw->rects;
-			plane = swap_hit->plane;
-			top = upper[plane];
-			bottom = lower[plane];
+			pipe = swap_hit->pipe;
+			top = upper[pipe];
+			bottom = lower[pipe];
 
 			for (num_rects = drw->num_rects; num_rects--; rect++) {
 				int y1 = max(rect->y1, top);
@@ -302,6 +273,7 @@
 	}
 
 	spin_unlock_irqrestore(&dev->drw_lock, irqflags);
+	mutex_unlock(&dev->struct_mutex);
 
 	list_for_each_safe(hit, tmp, &hits) {
 		drm_i915_vbl_swap_t *swap_hit =
@@ -313,15 +285,16 @@
 	}
 }
 
-u32 i915_get_vblank_counter(struct drm_device *dev, int plane)
+/* Called from drm generic code, passed a 'crtc', which
+ * we use as a pipe index
+ */
+u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	unsigned long high_frame;
 	unsigned long low_frame;
 	u32 high1, high2, low, count;
-	int pipe;
 
-	pipe = i915_get_pipe(dev, plane);
 	high_frame = pipe ? PIPEBFRAMEHIGH : PIPEAFRAMEHIGH;
 	low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL;
 
@@ -350,18 +323,37 @@
 }
 
 void
-i915_gem_vblank_work_handler(struct work_struct *work)
+i915_vblank_work_handler(struct work_struct *work)
 {
-	drm_i915_private_t *dev_priv;
-	struct drm_device *dev;
+	drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
+						    vblank_work);
+	struct drm_device *dev = dev_priv->dev;
+	unsigned long irqflags;
 
-	dev_priv = container_of(work, drm_i915_private_t,
-				mm.vblank_work);
-	dev = dev_priv->dev;
+	if (dev->lock.hw_lock == NULL) {
+		i915_vblank_tasklet(dev);
+		return;
+	}
 
-	mutex_lock(&dev->struct_mutex);
+	spin_lock_irqsave(&dev->tasklet_lock, irqflags);
+	dev->locked_tasklet_func = i915_vblank_tasklet;
+	spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
+
+	/* Try to get the lock now, if this fails, the lock
+	 * holder will execute the tasklet during unlock
+	 */
+	if (!drm_lock_take(&dev->lock, DRM_KERNEL_CONTEXT))
+		return;
+
+	dev->lock.lock_time = jiffies;
+	atomic_inc(&dev->counts[_DRM_STAT_LOCKS]);
+
+	spin_lock_irqsave(&dev->tasklet_lock, irqflags);
+	dev->locked_tasklet_func = NULL;
+	spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
+
 	i915_vblank_tasklet(dev);
-	mutex_unlock(&dev->struct_mutex);
+	drm_lock_free(&dev->lock, DRM_KERNEL_CONTEXT);
 }
 
 irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
@@ -398,7 +390,7 @@
 		else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
 					PIPE_VBLANK_INTERRUPT_STATUS)) {
 			vblank++;
-			drm_handle_vblank(dev, i915_get_plane(dev, 0));
+			drm_handle_vblank(dev, 0);
 		}
 
 		I915_WRITE(PIPEASTAT, pipea_stats);
@@ -416,7 +408,7 @@
 		else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
 					PIPE_VBLANK_INTERRUPT_STATUS)) {
 			vblank++;
-			drm_handle_vblank(dev, i915_get_plane(dev, 1));
+			drm_handle_vblank(dev, 1);
 		}
 
 		if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS)
@@ -441,12 +433,8 @@
 	if (iir & I915_ASLE_INTERRUPT)
 		opregion_asle_intr(dev);
 
-	if (vblank && dev_priv->swaps_pending > 0) {
-		if (dev_priv->ring.ring_obj == NULL)
-			drm_locked_tasklet(dev, i915_vblank_tasklet);
-		else
-			schedule_work(&dev_priv->mm.vblank_work);
-	}
+	if (vblank && dev_priv->swaps_pending > 0)
+		schedule_work(&dev_priv->vblank_work);
 
 	return IRQ_HANDLED;
 }
@@ -481,22 +469,24 @@
 void i915_user_irq_get(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	unsigned long irqflags;
 
-	spin_lock(&dev_priv->user_irq_lock);
+	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 	if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1))
 		i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
-	spin_unlock(&dev_priv->user_irq_lock);
+	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 }
 
 void i915_user_irq_put(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	unsigned long irqflags;
 
-	spin_lock(&dev_priv->user_irq_lock);
+	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 	BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0);
 	if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0))
 		i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
-	spin_unlock(&dev_priv->user_irq_lock);
+	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 }
 
 static int i915_wait_irq(struct drm_device * dev, int irq_nr)
@@ -578,74 +568,95 @@
 	return i915_wait_irq(dev, irqwait->irq_seq);
 }
 
-int i915_enable_vblank(struct drm_device *dev, int plane)
+/* Called from drm generic code, passed 'crtc' which
+ * we use as a pipe index
+ */
+int i915_enable_vblank(struct drm_device *dev, int pipe)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	int pipe = i915_get_pipe(dev, plane);
 	u32	pipestat_reg = 0;
 	u32	pipestat;
+	u32	interrupt = 0;
+	unsigned long irqflags;
 
 	switch (pipe) {
 	case 0:
 		pipestat_reg = PIPEASTAT;
-		i915_enable_irq(dev_priv, I915_DISPLAY_PIPE_A_EVENT_INTERRUPT);
+		interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
 		break;
 	case 1:
 		pipestat_reg = PIPEBSTAT;
-		i915_enable_irq(dev_priv, I915_DISPLAY_PIPE_B_EVENT_INTERRUPT);
+		interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
 		break;
 	default:
 		DRM_ERROR("tried to enable vblank on non-existent pipe %d\n",
 			  pipe);
-		break;
+		return 0;
 	}
 
-	if (pipestat_reg) {
-		pipestat = I915_READ(pipestat_reg);
-		if (IS_I965G(dev))
-			pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE;
-		else
-			pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE;
-		/* Clear any stale interrupt status */
-		pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
-			     PIPE_VBLANK_INTERRUPT_STATUS);
-		I915_WRITE(pipestat_reg, pipestat);
-	}
+	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
+	/* Enabling vblank events in IMR comes before PIPESTAT write, or
+	 * there's a race where the PIPESTAT vblank bit gets set to 1, so
+	 * the OR of enabled PIPESTAT bits goes to 1, so the PIPExEVENT in
+	 * ISR flashes to 1, but the IIR bit doesn't get set to 1 because
+	 * IMR masks it.  It doesn't ever get set after we clear the masking
+	 * in IMR because the ISR bit is edge, not level-triggered, on the
+	 * OR of PIPESTAT bits.
+	 */
+	i915_enable_irq(dev_priv, interrupt);
+	pipestat = I915_READ(pipestat_reg);
+	if (IS_I965G(dev))
+		pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE;
+	else
+		pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE;
+	/* Clear any stale interrupt status */
+	pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
+		     PIPE_VBLANK_INTERRUPT_STATUS);
+	I915_WRITE(pipestat_reg, pipestat);
+	(void) I915_READ(pipestat_reg);	/* Posting read */
+	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 
 	return 0;
 }
 
-void i915_disable_vblank(struct drm_device *dev, int plane)
+/* Called from drm generic code, passed 'crtc' which
+ * we use as a pipe index
+ */
+void i915_disable_vblank(struct drm_device *dev, int pipe)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	int pipe = i915_get_pipe(dev, plane);
 	u32	pipestat_reg = 0;
 	u32	pipestat;
+	u32	interrupt = 0;
+	unsigned long irqflags;
 
 	switch (pipe) {
 	case 0:
 		pipestat_reg = PIPEASTAT;
-		i915_disable_irq(dev_priv, I915_DISPLAY_PIPE_A_EVENT_INTERRUPT);
+		interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
 		break;
 	case 1:
 		pipestat_reg = PIPEBSTAT;
-		i915_disable_irq(dev_priv, I915_DISPLAY_PIPE_B_EVENT_INTERRUPT);
+		interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
 		break;
 	default:
 		DRM_ERROR("tried to disable vblank on non-existent pipe %d\n",
 			  pipe);
+		return;
 		break;
 	}
 
-	if (pipestat_reg) {
-		pipestat = I915_READ(pipestat_reg);
-		pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
-			      PIPE_VBLANK_INTERRUPT_ENABLE);
-		/* Clear any stale interrupt status */
-		pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
-			     PIPE_VBLANK_INTERRUPT_STATUS);
-		I915_WRITE(pipestat_reg, pipestat);
-	}
+	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
+	i915_disable_irq(dev_priv, interrupt);
+	pipestat = I915_READ(pipestat_reg);
+	pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
+		      PIPE_VBLANK_INTERRUPT_ENABLE);
+	/* Clear any stale interrupt status */
+	pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
+		     PIPE_VBLANK_INTERRUPT_STATUS);
+	I915_WRITE(pipestat_reg, pipestat);
+	(void) I915_READ(pipestat_reg);	/* Posting read */
+	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 }
 
 /* Set the vblank monitor pipe
@@ -687,8 +698,8 @@
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	drm_i915_vblank_swap_t *swap = data;
-	drm_i915_vbl_swap_t *vbl_swap;
-	unsigned int pipe, seqtype, curseq, plane;
+	drm_i915_vbl_swap_t *vbl_swap, *vbl_old;
+	unsigned int pipe, seqtype, curseq;
 	unsigned long irqflags;
 	struct list_head *list;
 	int ret;
@@ -709,8 +720,7 @@
 		return -EINVAL;
 	}
 
-	plane = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0;
-	pipe = i915_get_pipe(dev, plane);
+	pipe = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0;
 
 	seqtype = swap->seqtype & (_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE);
 
@@ -751,28 +761,6 @@
 		}
 	}
 
-	spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
-
-	list_for_each(list, &dev_priv->vbl_swaps.head) {
-		vbl_swap = list_entry(list, drm_i915_vbl_swap_t, head);
-
-		if (vbl_swap->drw_id == swap->drawable &&
-		    vbl_swap->plane == plane &&
-		    vbl_swap->sequence == swap->sequence) {
-			spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
-			DRM_DEBUG("Already scheduled\n");
-			return 0;
-		}
-	}
-
-	spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
-
-	if (dev_priv->swaps_pending >= 100) {
-		DRM_DEBUG("Too many swaps queued\n");
-		drm_vblank_put(dev, pipe);
-		return -EBUSY;
-	}
-
 	vbl_swap = drm_calloc(1, sizeof(*vbl_swap), DRM_MEM_DRIVER);
 
 	if (!vbl_swap) {
@@ -781,14 +769,44 @@
 		return -ENOMEM;
 	}
 
-	DRM_DEBUG("\n");
-
 	vbl_swap->drw_id = swap->drawable;
-	vbl_swap->plane = plane;
+	vbl_swap->pipe = pipe;
 	vbl_swap->sequence = swap->sequence;
 
 	spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
 
+	list_for_each(list, &dev_priv->vbl_swaps.head) {
+		vbl_old = list_entry(list, drm_i915_vbl_swap_t, head);
+
+		if (vbl_old->drw_id == swap->drawable &&
+		    vbl_old->pipe == pipe &&
+		    vbl_old->sequence == swap->sequence) {
+			spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
+			drm_vblank_put(dev, pipe);
+			drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
+			DRM_DEBUG("Already scheduled\n");
+			return 0;
+		}
+	}
+
+	if (dev_priv->swaps_pending >= 10) {
+		DRM_DEBUG("Too many swaps queued\n");
+		DRM_DEBUG(" pipe 0: %d pipe 1: %d\n",
+			  drm_vblank_count(dev, 0),
+			  drm_vblank_count(dev, 1));
+
+		list_for_each(list, &dev_priv->vbl_swaps.head) {
+			vbl_old = list_entry(list, drm_i915_vbl_swap_t, head);
+			DRM_DEBUG("\tdrw %x pipe %d seq %x\n",
+				  vbl_old->drw_id, vbl_old->pipe,
+				  vbl_old->sequence);
+		}
+		spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
+		drm_vblank_put(dev, pipe);
+		drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
+		return -EBUSY;
+	}
+
 	list_add_tail(&vbl_swap->head, &dev_priv->vbl_swaps.head);
 	dev_priv->swaps_pending++;
 
@@ -815,6 +833,7 @@
 
 	spin_lock_init(&dev_priv->swaps_lock);
 	INIT_LIST_HEAD(&dev_priv->vbl_swaps.head);
+	INIT_WORK(&dev_priv->vblank_work, i915_vblank_work_handler);
 	dev_priv->swaps_pending = 0;
 
 	/* Set initial unmasked IRQs to just the selected vblank pipes. */
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index f5999a9..b4fd8ca 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -247,7 +247,6 @@
 
 config THRUSTMASTER_FF
 	tristate "ThrustMaster devices support"
-	default m
 	depends on USB_HID
 	select INPUT_FF_MEMLESS
 	help
@@ -256,7 +255,6 @@
 
 config ZEROPLUS_FF
 	tristate "Zeroplus based game controller support"
-	default m
 	depends on USB_HID
 	select INPUT_FF_MEMLESS
 	help
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index fd7f896..c6ab4ba 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -312,13 +312,6 @@
 	unsigned int connect_mask = HID_CONNECT_DEFAULT;
 	int ret;
 
-	/* return something else or move to hid layer? device will reside
-	   allocated */
-	if (id->bus == BUS_USB && (quirks & APPLE_IGNORE_MOUSE) &&
-			to_usb_interface(hdev->dev.parent)->cur_altsetting->
-			desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE)
-		return -ENODEV;
-
 	asc = kzalloc(sizeof(*asc), GFP_KERNEL);
 	if (asc == NULL) {
 		dev_err(&hdev->dev, "can't alloc apple descriptor\n");
@@ -367,38 +360,32 @@
 		.driver_data = APPLE_MIGHTYMOUSE | APPLE_INVERT_HWHEEL },
 
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI),
-		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
-			APPLE_IGNORE_MOUSE },
+		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO),
-		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
-			APPLE_IGNORE_MOUSE },
+		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI),
-		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
-			APPLE_IGNORE_MOUSE },
+		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
-			APPLE_IGNORE_MOUSE | APPLE_ISO_KEYBOARD },
+			APPLE_ISO_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS),
-		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
-			APPLE_IGNORE_MOUSE },
+		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI),
-		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
-			APPLE_IGNORE_MOUSE },
+		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
-			APPLE_IGNORE_MOUSE | APPLE_ISO_KEYBOARD },
+			APPLE_ISO_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
-			APPLE_IGNORE_MOUSE | APPLE_RDESC_JIS },
+			APPLE_RDESC_JIS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI),
-		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
-			APPLE_IGNORE_MOUSE },
+		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
-			APPLE_IGNORE_MOUSE | APPLE_ISO_KEYBOARD },
+			APPLE_ISO_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
-			APPLE_IGNORE_MOUSE | APPLE_RDESC_JIS},
+			APPLE_RDESC_JIS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ANSI),
 		.driver_data = APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ISO),
@@ -406,14 +393,12 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_JIS),
 		.driver_data = APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI),
-		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
-			APPLE_IGNORE_MOUSE },
+		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO),
-		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
-			APPLE_IGNORE_MOUSE },
+		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
-			APPLE_IGNORE_MOUSE | APPLE_RDESC_JIS },
+			APPLE_RDESC_JIS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO),
@@ -422,25 +407,21 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
-		.driver_data = APPLE_HAS_FN | APPLE_IGNORE_MOUSE },
+		.driver_data = APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO),
-		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD |
-			APPLE_IGNORE_MOUSE },
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS),
-		.driver_data = APPLE_HAS_FN | APPLE_IGNORE_MOUSE | APPLE_RDESC_JIS },
+		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI),
-		.driver_data = APPLE_HAS_FN | APPLE_IGNORE_MOUSE },
+		.driver_data = APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO),
-		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD |
-			APPLE_IGNORE_MOUSE },
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS),
-		.driver_data = APPLE_HAS_FN | APPLE_IGNORE_MOUSE | APPLE_RDESC_JIS },
+		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY),
-		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
-			APPLE_IGNORE_MOUSE },
+		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY),
-		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
-			APPLE_IGNORE_MOUSE },
+		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 
 	/* Apple wireless Mighty Mouse */
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c),
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 721a36d..743e6f8 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1264,6 +1264,7 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) },
@@ -1275,8 +1276,6 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_KBD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_ELITE_KBD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_LX3) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_V150) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_EXTREME_3D) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WHEEL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD) },
@@ -1295,6 +1294,7 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) },
 
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c) },
@@ -1406,6 +1406,7 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)},
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)},
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) },
@@ -1541,6 +1542,40 @@
 	{ }
 };
 
+/**
+ * hid_mouse_ignore_list - mouse devices which should not be handled by the hid layer
+ *
+ * There are composite devices for which we want to ignore only a certain
+ * interface. This is a list of devices for which only the mouse interface will
+ * be ignored. This allows a dedicated driver to take care of the interface.
+ */
+static const struct hid_device_id hid_mouse_ignore_list[] = {
+	/* appletouch driver */
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
+	{ }
+};
+
 static bool hid_ignore(struct hid_device *hdev)
 {
 	switch (hdev->vendor) {
@@ -1557,6 +1592,10 @@
 		break;
 	}
 
+	if (hdev->type == HID_TYPE_USBMOUSE &&
+			hid_match_id(hdev, hid_mouse_ignore_list))
+		return true;
+
 	return !!hid_match_id(hdev, hid_ignore_list);
 }
 
diff --git a/drivers/hid/hid-gyration.c b/drivers/hid/hid-gyration.c
index ac5120f..04a0afe 100644
--- a/drivers/hid/hid-gyration.c
+++ b/drivers/hid/hid-gyration.c
@@ -4,9 +4,9 @@
  *  Copyright (c) 1999 Andreas Gal
  *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
  *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
- *  Copyright (c) 2006-2007 Jiri Kosina
  *  Copyright (c) 2007 Paul Walmsley
  *  Copyright (c) 2008 Jiri Slaby
+ *  Copyright (c) 2006-2008 Jiri Kosina
  */
 
 /*
@@ -40,6 +40,7 @@
 	case 0x025: gy_map_key_clear(KEY_PVR);		break;
 	case 0x046: gy_map_key_clear(KEY_MEDIA);	break;
 	case 0x047: gy_map_key_clear(KEY_MP3);		break;
+	case 0x048: gy_map_key_clear(KEY_MEDIA);	break;
 	case 0x049: gy_map_key_clear(KEY_CAMERA);	break;
 	case 0x04a: gy_map_key_clear(KEY_VIDEO);	break;
 
@@ -68,6 +69,7 @@
 
 static const struct hid_device_id gyration_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, gyration_devices);
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index d9a1ba9..a0d6a6c 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -89,6 +89,7 @@
 
 #define USB_VENDOR_ID_ASUS		0x0b05
 #define USB_DEVICE_ID_ASUS_LCM		0x1726
+#define USB_DEVICE_ID_ASUS_LCM2		0x175b
 
 #define USB_VENDOR_ID_ATEN		0x0557
 #define USB_DEVICE_ID_ATEN_UC100KM	0x2004
@@ -236,6 +237,7 @@
 
 #define USB_VENDOR_ID_GYRATION		0x0c16
 #define USB_DEVICE_ID_GYRATION_REMOTE	0x0002
+#define USB_DEVICE_ID_GYRATION_REMOTE_2 0x0003
 
 #define USB_VENDOR_ID_HAPP		0x078b
 #define USB_DEVICE_ID_UGCI_DRIVING	0x0010
@@ -268,8 +270,6 @@
 #define USB_DEVICE_ID_LD_MACHINETEST	0x2040
 
 #define USB_VENDOR_ID_LOGITECH		0x046d
-#define USB_DEVICE_ID_LOGITECH_LX3	0xc044
-#define USB_DEVICE_ID_LOGITECH_V150	0xc047
 #define USB_DEVICE_ID_LOGITECH_RECEIVER	0xc101
 #define USB_DEVICE_ID_LOGITECH_HARMONY_FIRST  0xc110
 #define USB_DEVICE_ID_LOGITECH_HARMONY_LAST 0xc14f
@@ -350,6 +350,7 @@
 #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE	0x0001
 
 #define USB_VENDOR_ID_SONY			0x054c
+#define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE	0x024b
 #define USB_DEVICE_ID_SONY_PS3_CONTROLLER	0x0268
 
 #define USB_VENDOR_ID_SOUNDGRAPH	0x15c2
diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c
index 406d8c8..2bae340 100644
--- a/drivers/hid/hid-lg.c
+++ b/drivers/hid/hid-lg.c
@@ -287,11 +287,6 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500),
 		.driver_data = LG_IGNORE_DOUBLED_WHEEL | LG_EXPANDED_KEYMAP },
 
-	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_LX3),
-		.driver_data = LG_INVERT_HWHEEL },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_V150),
-		.driver_data = LG_INVERT_HWHEEL },
-
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_EXTREME_3D),
 		.driver_data = LG_NOGET },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WHEEL),
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 3af8095..86e563b 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -4,9 +4,9 @@
  *  Copyright (c) 1999 Andreas Gal
  *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
  *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
- *  Copyright (c) 2006-2007 Jiri Kosina
  *  Copyright (c) 2007 Paul Walmsley
  *  Copyright (c) 2008 Jiri Slaby
+ *  Copyright (c) 2006-2008 Jiri Kosina
  */
 
 /*
@@ -23,6 +23,26 @@
 
 #include "hid-ids.h"
 
+#define VAIO_RDESC_CONSTANT 0x0001
+
+struct sony_sc {
+	unsigned long quirks;
+};
+
+/* Sony Vaio VGX has wrongly mouse pointer declared as constant */
+static void sony_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int rsize)
+{
+	struct sony_sc *sc = hid_get_drvdata(hdev);
+
+	if ((sc->quirks & VAIO_RDESC_CONSTANT) &&
+			rsize >= 56 && rdesc[54] == 0x81 && rdesc[55] == 0x07) {
+		dev_info(&hdev->dev, "Fixing up Sony Vaio VGX report "
+				"descriptor\n");
+		rdesc[55] = 0x06;
+	}
+}
+
 /*
  * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
  * to "operational".  Without this, the ps3 controller will not report any
@@ -56,6 +76,17 @@
 static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
 	int ret;
+	unsigned long quirks = id->driver_data;
+	struct sony_sc *sc;
+
+	sc = kzalloc(sizeof(*sc), GFP_KERNEL);
+	if (sc == NULL) {
+		dev_err(&hdev->dev, "can't alloc apple descriptor\n");
+		return -ENOMEM;
+	}
+
+	sc->quirks = quirks;
+	hid_set_drvdata(hdev, sc);
 
 	ret = hid_parse(hdev);
 	if (ret) {
@@ -78,11 +109,20 @@
 err_stop:
 	hid_hw_stop(hdev);
 err_free:
+	kfree(sc);
 	return ret;
 }
 
+static void sony_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+}
+
 static const struct hid_device_id sony_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE),
+		.driver_data = VAIO_RDESC_CONSTANT },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, sony_devices);
@@ -91,6 +131,8 @@
 	.name = "sony",
 	.id_table = sony_devices,
 	.probe = sony_probe,
+	.remove = sony_remove,
+	.report_fixup = sony_report_fixup,
 };
 
 static int sony_init(void)
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index af3edb9..894d52e 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -264,6 +264,7 @@
 		default:
 			ret = -ENOTTY;
 	}
+	unlock_kernel();
 	return ret;
 }
 
@@ -403,7 +404,7 @@
 	return result;
 }
 
-void __exit hidraw_exit(void)
+void hidraw_exit(void)
 {
 	dev_t dev_id = MKDEV(hidraw_major, 0);
 
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 705a43c..42bdd83 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -972,6 +972,9 @@
 	hid->vendor = le16_to_cpu(dev->descriptor.idVendor);
 	hid->product = le16_to_cpu(dev->descriptor.idProduct);
 	hid->name[0] = 0;
+	if (intf->cur_altsetting->desc.bInterfaceProtocol ==
+			USB_INTERFACE_PROTOCOL_MOUSE)
+		hid->type = HID_TYPE_USBMOUSE;
 
 	if (dev->manufacturer)
 		strlcpy(hid->name, dev->manufacturer, sizeof(hid->name));
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index babd65d..3ac3207 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -436,8 +436,7 @@
 		if (copy_to_user(user_arg, uref, sizeof(*uref)))
 			goto fault;
 
-		kfree(uref_multi);
-		return 0;
+		goto goodreturn;
 
 	default:
 		if (cmd != HIDIOCGUSAGE &&
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index d9e7a49..70bb854 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -178,7 +178,7 @@
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM",		26, 1, 1, 1, 0 },
 		{ "CPU Fan",		32, 2, 60, 1, 0 },
 		{ "NB Fan",		33, 2, 60, 1, 0 },
@@ -200,7 +200,7 @@
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM1",		26, 1, 1, 1, 0 },
 		{ "PWM2",		27, 1, 1, 1, 0 },
 		{ "PWM3",		28, 1, 1, 1, 0 },
@@ -229,7 +229,7 @@
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM",		26, 1, 1, 1, 0 },
 		{ "CPU Fan",		32, 2, 60, 1, 0 },
 		{ "NB Fan",		33, 2, 60, 1, 0 },
@@ -250,7 +250,7 @@
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM",		26, 1, 1, 1, 0 },
 		{ "CPU Fan",		32, 2, 60, 1, 0 },
 		{ "NB Fan",		33, 2, 60, 1, 0 },
@@ -342,7 +342,7 @@
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM1",		26, 1, 1, 1, 0 },
 		{ "PWM2",		27, 1, 1, 1, 0 },
 		{ "PWM3",		28, 1, 1, 1, 0 },
@@ -371,7 +371,7 @@
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM",		26, 1, 1, 1, 0 },
 		{ "CPU Fan",		32, 2, 60, 1, 0 },
 		{ "NB Fan",		33, 2, 60, 1, 0 },
@@ -402,7 +402,7 @@
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0016, NULL /* AW9D-MAX, need DMI string */, {
+	{ 0x0016, "AW9D-MAX       (Intel i975-ICH7)", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -416,7 +416,7 @@
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM1",		26, 1, 1, 1, 0 },
 		{ "PWM2",		27, 1, 1, 1, 0 },
 		{ "PWM3",		28, 1, 1, 1, 0 },
@@ -446,7 +446,7 @@
 		{ "ATX +3.3V",		10, 0, 20, 1, 0 },
 		{ "ATX 5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		26, 1, 1, 1, 0 },
+		{ "System",		26, 1, 1, 1, 0 },
 		{ "PWM",		27, 1, 1, 1, 0 },
 		{ "CPU FAN",		32, 2, 60, 1, 0 },
 		{ "SYS FAN",		34, 2, 60, 1, 0 },
@@ -469,7 +469,7 @@
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM Phase1",		26, 1, 1, 1, 0 },
 		{ "PWM Phase2",		27, 1, 1, 1, 0 },
 		{ "PWM Phase3",		28, 1, 1, 1, 0 },
@@ -487,7 +487,7 @@
 		{ "DDR2",		13, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		14, 0, 10, 1, 0 },
 		{ "CPU VTT",		 3, 0, 20, 1, 0 },
-		{ "NB 1.2V ",		 4, 0, 10, 1, 0 },
+		{ "NB 1.2V",		 4, 0, 10, 1, 0 },
 		{ "SB 1.5V",		 6, 0, 10, 1, 0 },
 		{ "HyperTransport",	 5, 0, 10, 1, 0 },
 		{ "ATX +12V (24-Pin)",	12, 0, 60, 1, 0 },
@@ -496,7 +496,7 @@
 		{ "ATX +3.3V",		10, 0, 20, 1, 0 },
 		{ "ATX 5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM Phase1",		26, 1, 1, 1, 0 },
 		{ "PWM Phase2",		27, 1, 1, 1, 0 },
 		{ "PWM Phase3",		28, 1, 1, 1, 0 },
@@ -523,8 +523,8 @@
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
-		{ "PWM ",		26, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
+		{ "PWM",		26, 1, 1, 1, 0 },
 		{ "PWM Phase2",		27, 1, 1, 1, 0 },
 		{ "PWM Phase3",		28, 1, 1, 1, 0 },
 		{ "PWM Phase4",		29, 1, 1, 1, 0 },
@@ -947,7 +947,7 @@
 	if (!abituguru3_motherboards[i].dmi_name) {
 		printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was "
 			"not detected using DMI. Please send the output of "
-			"\"dmidecode\" to the abituguru3 maintainer"
+			"\"dmidecode\" to the abituguru3 maintainer "
 			"(see MAINTAINERS)\n");
 	}
 #endif
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index 3a0b631..b9a8ea3 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -319,35 +319,24 @@
 }
 
 /*
- * On this chip, voltages are given as a count of steps between a minimum
- * and maximum voltage, not a direct voltage.
+ * Conversions
  */
-static const int volt_convert_table[][2] = {
-	{2997, 3},
-	{4395, 4},
+
+/* IN are scaled acording to built-in resistors */
+static const int adt7473_scaling[] = {  /* .001 Volts */
+	2250, 3300
 };
+#define SCALE(val, from, to)	(((val) * (to) + ((from) / 2)) / (from))
 
 static int decode_volt(int volt_index, u8 raw)
 {
-	int cmax = volt_convert_table[volt_index][0];
-	int cmin = volt_convert_table[volt_index][1];
-	return ((raw * (cmax - cmin)) / 255) + cmin;
+	return SCALE(raw, 192, adt7473_scaling[volt_index]);
 }
 
 static u8 encode_volt(int volt_index, int cooked)
 {
-	int cmax = volt_convert_table[volt_index][0];
-	int cmin = volt_convert_table[volt_index][1];
-	u8 x;
-
-	if (cooked > cmax)
-		cooked = cmax;
-	else if (cooked < cmin)
-		cooked = cmin;
-
-	x = ((cooked - cmin) * 255) / (cmax - cmin);
-
-	return x;
+	int raw = SCALE(cooked, adt7473_scaling[volt_index], 192);
+	return SENSORS_LIMIT(raw, 0, 255);
 }
 
 static ssize_t show_volt_min(struct device *dev,
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index c54eff9..bfc2961 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -180,6 +180,7 @@
 	{X86_VENDOR_AMD, 0x6, ANY, ANY, 90},		/* Athlon Duron etc */
 	{X86_VENDOR_AMD, 0xF, 0x3F, ANY, 24},		/* Athlon 64, Opteron */
 	{X86_VENDOR_AMD, 0xF, ANY, ANY, 25},		/* NPT family 0Fh */
+	{X86_VENDOR_AMD, 0x10, ANY, ANY, 25},		/* NPT family 10h */
 	{X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13},		/* Pentium M (130 nm) */
 	{X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85},		/* Tualatin */
 	{X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13},		/* Pentium M (90 nm) */
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 3edeebc..96a7018 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -12,9 +12,9 @@
  * made by National Semiconductor. Both have an increased remote
  * temperature measurement accuracy (1 degree), and the LM99
  * additionally shifts remote temperatures (measured and limits) by 16
- * degrees, which allows for higher temperatures measurement. The
- * driver doesn't handle it since it can be done easily in user-space.
+ * degrees, which allows for higher temperatures measurement.
  * Note that there is no way to differentiate between both chips.
+ * When device is auto-detected, the driver will assume an LM99.
  *
  * This driver also supports the LM86, another sensor chip made by
  * National Semiconductor. It is exactly similar to the LM90 except it
@@ -169,8 +169,8 @@
 	{ "adt7461", adt7461 },
 	{ "lm90", lm90 },
 	{ "lm86", lm86 },
-	{ "lm89", lm99 },
-	{ "lm99", lm99 },	/* Missing temperature offset */
+	{ "lm89", lm86 },
+	{ "lm99", lm99 },
 	{ "max6646", max6646 },
 	{ "max6647", max6646 },
 	{ "max6649", max6646 },
@@ -366,6 +366,10 @@
 	else
 		temp = temp_from_s8(data->temp8[attr->index]);
 
+	/* +16 degrees offset for temp2 for the LM99 */
+	if (data->kind == lm99 && attr->index == 3)
+		temp += 16000;
+
 	return sprintf(buf, "%d\n", temp);
 }
 
@@ -385,6 +389,10 @@
 	long val = simple_strtol(buf, NULL, 10);
 	int nr = attr->index;
 
+	/* +16 degrees offset for temp2 for the LM99 */
+	if (data->kind == lm99 && attr->index == 3)
+		val -= 16000;
+
 	mutex_lock(&data->update_lock);
 	if (data->kind == adt7461)
 		data->temp8[nr] = temp_to_u8_adt7461(data, val);
@@ -411,6 +419,10 @@
 	else
 		temp = temp_from_s16(data->temp11[attr->index]);
 
+	/* +16 degrees offset for temp2 for the LM99 */
+	if (data->kind == lm99 &&  attr->index <= 2)
+		temp += 16000;
+
 	return sprintf(buf, "%d\n", temp);
 }
 
@@ -432,6 +444,10 @@
 	long val = simple_strtol(buf, NULL, 10);
 	int nr = attr->index;
 
+	/* +16 degrees offset for temp2 for the LM99 */
+	if (data->kind == lm99 && attr->index <= 2)
+		val -= 16000;
+
 	mutex_lock(&data->update_lock);
 	if (data->kind == adt7461)
 		data->temp11[nr] = temp_to_u16_adt7461(data, val);
@@ -461,9 +477,15 @@
 
 	if (data->kind == adt7461)
 		temp = temp_from_u8_adt7461(data, data->temp8[attr->index]);
+	else if (data->kind == max6646)
+		temp = temp_from_u8(data->temp8[attr->index]);
 	else
 		temp = temp_from_s8(data->temp8[attr->index]);
 
+	/* +16 degrees offset for temp2 for the LM99 */
+	if (data->kind == lm99 && attr->index == 3)
+		temp += 16000;
+
 	return sprintf(buf, "%d\n", temp - temp_from_s8(data->temp_hyst));
 }
 
@@ -473,12 +495,19 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm90_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
-	long hyst;
+	int temp;
 
 	mutex_lock(&data->update_lock);
-	hyst = temp_from_s8(data->temp8[2]) - val;
+	if (data->kind == adt7461)
+		temp = temp_from_u8_adt7461(data, data->temp8[2]);
+	else if (data->kind == max6646)
+		temp = temp_from_u8(data->temp8[2]);
+	else
+		temp = temp_from_s8(data->temp8[2]);
+
+	data->temp_hyst = hyst_to_reg(temp - val);
 	i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST,
-				  hyst_to_reg(hyst));
+				  data->temp_hyst);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -682,6 +711,15 @@
 				} else
 				if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
 					kind = lm99;
+					dev_info(&adapter->dev,
+						 "Assuming LM99 chip at "
+						 "0x%02x\n", address);
+					dev_info(&adapter->dev,
+						 "If it is an LM89, pass "
+						 "force_lm86=%d,0x%02x when "
+						 "loading the lm90 driver\n",
+						 i2c_adapter_id(adapter),
+						 address);
 				} else
 				if (address == 0x4C
 				 && (chip_id & 0xF0) == 0x10) { /* LM86 */
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index d4d1b85..fc12bd4 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1968,7 +1968,7 @@
 	return res;
 }
 
-static void __exit
+static void
 w83781d_isa_unregister(void)
 {
 	if (pdev) {
@@ -2017,7 +2017,7 @@
 	return 0;
 }
 
-static void __exit
+static void
 w83781d_isa_unregister(void)
 {
 }
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 1e328d19..3e01992 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -135,7 +135,7 @@
 	*status = get_pcf(adap, 1);
 #ifndef STUB_I2C
 	while (timeout-- && (*status & I2C_PCF_PIN)) {
-		adap->waitforpin();
+		adap->waitforpin(adap->data);
 		*status = get_pcf(adap, 1);
 	}
 	if (*status & I2C_PCF_LAB) {
@@ -208,7 +208,7 @@
 		return -ENXIO;
 	}
 	
-	printk(KERN_DEBUG "i2c-algo-pcf.o: deteted and initialized PCF8584.\n");
+	printk(KERN_DEBUG "i2c-algo-pcf.o: detected and initialized PCF8584.\n");
 
 	return 0;
 }
@@ -331,13 +331,16 @@
 	int i;
 	int ret=0, timeout, status;
     
+	if (adap->xfer_begin)
+		adap->xfer_begin(adap->data);
 
 	/* Check for bus busy */
 	timeout = wait_for_bb(adap);
 	if (timeout) {
 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: "
 		            "Timeout waiting for BB in pcf_xfer\n");)
-		return -EIO;
+		i = -EIO;
+		goto out;
 	}
 	
 	for (i = 0;ret >= 0 && i < num; i++) {
@@ -359,12 +362,14 @@
 		if (timeout) {
 			if (timeout == -EINTR) {
 				/* arbitration lost */
-				return (-EINTR);
+				i = -EINTR;
+				goto out;
 			}
 			i2c_stop(adap);
 			DEB2(printk(KERN_ERR "i2c-algo-pcf.o: Timeout waiting "
 				    "for PIN(1) in pcf_xfer\n");)
-			return (-EREMOTEIO);
+			i = -EREMOTEIO;
+			goto out;
 		}
     
 #ifndef STUB_I2C
@@ -372,7 +377,8 @@
 		if (status & I2C_PCF_LRB) {
 			i2c_stop(adap);
 			DEB2(printk(KERN_ERR "i2c-algo-pcf.o: No LRB(1) in pcf_xfer\n");)
-			return (-EREMOTEIO);
+			i = -EREMOTEIO;
+			goto out;
 		}
 #endif
     
@@ -404,6 +410,9 @@
 		}
 	}
 
+out:
+	if (adap->xfer_end)
+		adap->xfer_end(adap->data);
 	return (i);
 }
 
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index acadbc5..7f95905 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -97,6 +97,7 @@
 	    ICH9
 	    Tolapai
 	    ICH10
+	    PCH
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 8164de1..228f757 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -423,7 +423,6 @@
 	.owner		= THIS_MODULE,
 	.name		= "i2c-cpm",
 	.algo		= &cpm_i2c_algo,
-	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 };
 
 static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 7f38c01..0ed3ccb 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -104,7 +104,8 @@
 	return (clock);
 }
 
-static void pcf_isa_waitforpin(void) {
+static void pcf_isa_waitforpin(void *data)
+{
 	DEFINE_WAIT(wait);
 	int timeout = 2;
 	unsigned long flags;
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index 1098f21..648aa7b 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -123,7 +123,7 @@
 				hydra_adap.name))
 		return -EBUSY;
 
-	hydra_bit_data.data = ioremap(base, pci_resource_len(dev, 0));
+	hydra_bit_data.data = pci_ioremap_bar(dev, 0);
 	if (hydra_bit_data.data == NULL) {
 		release_mem_region(base+offsetof(struct Hydra, CachePD), 4);
 		return -ENODEV;
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index dc7ea32..5123eb6 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -41,6 +41,7 @@
   Tolapai               0x5032     32     hard     yes     yes     yes
   ICH10                 0x3a30     32     hard     yes     yes     yes
   ICH10                 0x3a60     32     hard     yes     yes     yes
+  PCH                   0x3b30     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -576,6 +577,7 @@
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) },
 	{ 0, }
 };
 
@@ -599,6 +601,7 @@
 	case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
 	case PCI_DEVICE_ID_INTEL_ICH10_4:
 	case PCI_DEVICE_ID_INTEL_ICH10_5:
+	case PCI_DEVICE_ID_INTEL_PCH_SMBUS:
 		i801_features |= FEATURE_I2C_BLOCK_READ;
 		/* fall through */
 	case PCI_DEVICE_ID_INTEL_82801DB_3:
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 1735682..4c35702 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -1,6 +1,8 @@
 #
 # Miscellaneous I2C chip drivers configuration
 #
+# *** DEPRECATED! Do not add new entries! See Makefile ***
+#
 
 menu "Miscellaneous I2C Chip support"
 
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index ca520fa..23d2a31 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -1,7 +1,8 @@
 #
 # Makefile for miscellaneous I2C chip drivers.
 #
-# Think twice before you add a new driver to this directory.
+# Do not add new drivers to this directory! It is DEPRECATED.
+#
 # Device drivers are better grouped according to the functionality they
 # implement rather than to the bus they are connected to. In particular:
 # * Hardware monitoring chip drivers go to drivers/hwmon
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 42e852d..5a485c2 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -266,6 +266,9 @@
 
 	client->dev.platform_data = info->platform_data;
 
+	if (info->archdata)
+		client->dev.archdata = *info->archdata;
+
 	client->flags = info->flags;
 	client->addr = info->addr;
 	client->irq = info->irq;
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index a820ca6..6d74017 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -720,6 +720,16 @@
        default "128"
        depends on BLK_DEV_IDE_AU1XXX
 
+config BLK_DEV_IDE_TX4938
+	tristate "TX4938 internal IDE support"
+	depends on SOC_TX4938
+	select IDE_TIMINGS
+
+config BLK_DEV_IDE_TX4939
+	tristate "TX4939 internal IDE support"
+	depends on SOC_TX4939
+	select BLK_DEV_IDEDMA_SFF
+
 config IDE_ARM
 	tristate "ARM IDE support"
 	depends on ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 093d324..7818d40 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -18,22 +18,65 @@
 
 obj-$(CONFIG_IDE)			+= ide-core.o
 
-ifeq ($(CONFIG_IDE_ARM), y)
-	ide-arm-core-y += arm/ide_arm.o
-	obj-y += ide-arm-core.o
-endif
+obj-$(CONFIG_IDE_ARM)			+= ide_arm.o
 
-obj-$(CONFIG_IDE)			+= legacy/ pci/
+obj-$(CONFIG_BLK_DEV_ALI14XX)		+= ali14xx.o
+obj-$(CONFIG_BLK_DEV_UMC8672)		+= umc8672.o
+obj-$(CONFIG_BLK_DEV_DTC2278)		+= dtc2278.o
+obj-$(CONFIG_BLK_DEV_HT6560B)		+= ht6560b.o
+obj-$(CONFIG_BLK_DEV_QD65XX)		+= qd65xx.o
+obj-$(CONFIG_BLK_DEV_4DRIVES)		+= ide-4drives.o
+
+obj-$(CONFIG_BLK_DEV_GAYLE)		+= gayle.o
+obj-$(CONFIG_BLK_DEV_FALCON_IDE)	+= falconide.o
+obj-$(CONFIG_BLK_DEV_MAC_IDE)		+= macide.o
+obj-$(CONFIG_BLK_DEV_Q40IDE)		+= q40ide.o
+obj-$(CONFIG_BLK_DEV_BUDDHA)		+= buddha.o
+
+obj-$(CONFIG_BLK_DEV_AEC62XX)		+= aec62xx.o
+obj-$(CONFIG_BLK_DEV_ALI15X3)		+= alim15x3.o
+obj-$(CONFIG_BLK_DEV_AMD74XX)		+= amd74xx.o
+obj-$(CONFIG_BLK_DEV_ATIIXP)		+= atiixp.o
+obj-$(CONFIG_BLK_DEV_CELLEB)		+= scc_pata.o
+obj-$(CONFIG_BLK_DEV_CMD64X)		+= cmd64x.o
+obj-$(CONFIG_BLK_DEV_CS5520)		+= cs5520.o
+obj-$(CONFIG_BLK_DEV_CS5530)		+= cs5530.o
+obj-$(CONFIG_BLK_DEV_CS5535)		+= cs5535.o
+obj-$(CONFIG_BLK_DEV_SC1200)		+= sc1200.o
+obj-$(CONFIG_BLK_DEV_CY82C693)		+= cy82c693.o
+obj-$(CONFIG_BLK_DEV_DELKIN)		+= delkin_cb.o
+obj-$(CONFIG_BLK_DEV_HPT366)		+= hpt366.o
+obj-$(CONFIG_BLK_DEV_IT8213)		+= it8213.o
+obj-$(CONFIG_BLK_DEV_IT821X)		+= it821x.o
+obj-$(CONFIG_BLK_DEV_JMICRON)		+= jmicron.o
+obj-$(CONFIG_BLK_DEV_NS87415)		+= ns87415.o
+obj-$(CONFIG_BLK_DEV_OPTI621)		+= opti621.o
+obj-$(CONFIG_BLK_DEV_PDC202XX_OLD)	+= pdc202xx_old.o
+obj-$(CONFIG_BLK_DEV_PDC202XX_NEW)	+= pdc202xx_new.o
+obj-$(CONFIG_BLK_DEV_PIIX)		+= piix.o
+obj-$(CONFIG_BLK_DEV_RZ1000)		+= rz1000.o
+obj-$(CONFIG_BLK_DEV_SVWKS)		+= serverworks.o
+obj-$(CONFIG_BLK_DEV_SGIIOC4)		+= sgiioc4.o
+obj-$(CONFIG_BLK_DEV_SIIMAGE)		+= siimage.o
+obj-$(CONFIG_BLK_DEV_SIS5513)		+= sis5513.o
+obj-$(CONFIG_BLK_DEV_SL82C105)		+= sl82c105.o
+obj-$(CONFIG_BLK_DEV_SLC90E66)		+= slc90e66.o
+obj-$(CONFIG_BLK_DEV_TC86C001)		+= tc86c001.o
+obj-$(CONFIG_BLK_DEV_TRIFLEX)		+= triflex.o
+obj-$(CONFIG_BLK_DEV_TRM290)		+= trm290.o
+obj-$(CONFIG_BLK_DEV_VIA82CXXX)		+= via82cxxx.o
+
+# Must appear at the end of the block
+obj-$(CONFIG_BLK_DEV_GENERIC)		+= ide-pci-generic.o
 
 obj-$(CONFIG_IDEPCI_PCIBUS_ORDER)	+= ide-scan-pci.o
 
-ifeq ($(CONFIG_BLK_DEV_CMD640), y)
-	cmd640-core-y += pci/cmd640.o
-	obj-y += cmd640-core.o
-endif
+obj-$(CONFIG_BLK_DEV_CMD640)		+= cmd640.o
 
-obj-$(CONFIG_IDE)			+= ppc/
-obj-$(CONFIG_IDE_H8300)			+= h8300/
+obj-$(CONFIG_BLK_DEV_IDE_PMAC)		+= pmac.o
+
+obj-$(CONFIG_IDE_H8300)			+= ide-h8300.o
+
 obj-$(CONFIG_IDE_GENERIC)		+= ide-generic.o
 obj-$(CONFIG_BLK_DEV_IDEPNP)		+= ide-pnp.o
 
@@ -58,14 +101,15 @@
 obj-$(CONFIG_BLK_DEV_IDECD)		+= ide-cd_mod.o
 obj-$(CONFIG_BLK_DEV_IDETAPE)		+= ide-tape.o
 
-ifeq ($(CONFIG_BLK_DEV_IDECS), y)
-	ide-cs-core-y += legacy/ide-cs.o
-	obj-y += ide-cs-core.o
-endif
+obj-$(CONFIG_BLK_DEV_IDECS)		+= ide-cs.o
 
-ifeq ($(CONFIG_BLK_DEV_PLATFORM), y)
-	ide-platform-core-y += legacy/ide_platform.o
-	obj-y += ide-platform-core.o
-endif
+obj-$(CONFIG_BLK_DEV_PLATFORM)		+= ide_platform.o
 
-obj-$(CONFIG_IDE)			+= arm/ mips/
+obj-$(CONFIG_BLK_DEV_IDE_ICSIDE)	+= icside.o
+obj-$(CONFIG_BLK_DEV_IDE_RAPIDE)	+= rapide.o
+obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710)	+= palm_bk3710.o
+
+obj-$(CONFIG_BLK_DEV_IDE_AU1XXX)	+= au1xxx-ide.o
+
+obj-$(CONFIG_BLK_DEV_IDE_TX4938)	+= tx4938ide.o
+obj-$(CONFIG_BLK_DEV_IDE_TX4939)	+= tx4939ide.o
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/aec62xx.c
similarity index 100%
rename from drivers/ide/pci/aec62xx.c
rename to drivers/ide/aec62xx.c
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/ali14xx.c
similarity index 100%
rename from drivers/ide/legacy/ali14xx.c
rename to drivers/ide/ali14xx.c
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/alim15x3.c
similarity index 100%
rename from drivers/ide/pci/alim15x3.c
rename to drivers/ide/alim15x3.c
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/amd74xx.c
similarity index 100%
rename from drivers/ide/pci/amd74xx.c
rename to drivers/ide/amd74xx.c
diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile
deleted file mode 100644
index 5bc2605..0000000
--- a/drivers/ide/arm/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-
-obj-$(CONFIG_BLK_DEV_IDE_ICSIDE)	+= icside.o
-obj-$(CONFIG_BLK_DEV_IDE_RAPIDE)	+= rapide.o
-obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710)	+= palm_bk3710.o
-
-ifeq ($(CONFIG_IDE_ARM), m)
-	obj-m += ide_arm.o
-endif
-
-EXTRA_CFLAGS	:= -Idrivers/ide
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
deleted file mode 100644
index 76bdc9a..0000000
--- a/drivers/ide/arm/icside.c
+++ /dev/null
@@ -1,703 +0,0 @@
-/*
- * Copyright (c) 1996-2004 Russell King.
- *
- * Please note that this platform does not support 32-bit IDE IO.
- */
-
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
-#include <linux/errno.h>
-#include <linux/ide.h>
-#include <linux/dma-mapping.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/scatterlist.h>
-#include <linux/io.h>
-
-#include <asm/dma.h>
-#include <asm/ecard.h>
-
-#define DRV_NAME "icside"
-
-#define ICS_IDENT_OFFSET		0x2280
-
-#define ICS_ARCIN_V5_INTRSTAT		0x0000
-#define ICS_ARCIN_V5_INTROFFSET		0x0004
-#define ICS_ARCIN_V5_IDEOFFSET		0x2800
-#define ICS_ARCIN_V5_IDEALTOFFSET	0x2b80
-#define ICS_ARCIN_V5_IDESTEPPING	6
-
-#define ICS_ARCIN_V6_IDEOFFSET_1	0x2000
-#define ICS_ARCIN_V6_INTROFFSET_1	0x2200
-#define ICS_ARCIN_V6_INTRSTAT_1		0x2290
-#define ICS_ARCIN_V6_IDEALTOFFSET_1	0x2380
-#define ICS_ARCIN_V6_IDEOFFSET_2	0x3000
-#define ICS_ARCIN_V6_INTROFFSET_2	0x3200
-#define ICS_ARCIN_V6_INTRSTAT_2		0x3290
-#define ICS_ARCIN_V6_IDEALTOFFSET_2	0x3380
-#define ICS_ARCIN_V6_IDESTEPPING	6
-
-struct cardinfo {
-	unsigned int dataoffset;
-	unsigned int ctrloffset;
-	unsigned int stepping;
-};
-
-static struct cardinfo icside_cardinfo_v5 = {
-	.dataoffset	= ICS_ARCIN_V5_IDEOFFSET,
-	.ctrloffset	= ICS_ARCIN_V5_IDEALTOFFSET,
-	.stepping	= ICS_ARCIN_V5_IDESTEPPING,
-};
-
-static struct cardinfo icside_cardinfo_v6_1 = {
-	.dataoffset	= ICS_ARCIN_V6_IDEOFFSET_1,
-	.ctrloffset	= ICS_ARCIN_V6_IDEALTOFFSET_1,
-	.stepping	= ICS_ARCIN_V6_IDESTEPPING,
-};
-
-static struct cardinfo icside_cardinfo_v6_2 = {
-	.dataoffset	= ICS_ARCIN_V6_IDEOFFSET_2,
-	.ctrloffset	= ICS_ARCIN_V6_IDEALTOFFSET_2,
-	.stepping	= ICS_ARCIN_V6_IDESTEPPING,
-};
-
-struct icside_state {
-	unsigned int channel;
-	unsigned int enabled;
-	void __iomem *irq_port;
-	void __iomem *ioc_base;
-	unsigned int sel;
-	unsigned int type;
-	struct ide_host *host;
-};
-
-#define ICS_TYPE_A3IN	0
-#define ICS_TYPE_A3USER	1
-#define ICS_TYPE_V6	3
-#define ICS_TYPE_V5	15
-#define ICS_TYPE_NOTYPE	((unsigned int)-1)
-
-/* ---------------- Version 5 PCB Support Functions --------------------- */
-/* Prototype: icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
- * Purpose  : enable interrupts from card
- */
-static void icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
-{
-	struct icside_state *state = ec->irq_data;
-
-	writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET);
-}
-
-/* Prototype: icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
- * Purpose  : disable interrupts from card
- */
-static void icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
-{
-	struct icside_state *state = ec->irq_data;
-
-	readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET);
-}
-
-static const expansioncard_ops_t icside_ops_arcin_v5 = {
-	.irqenable	= icside_irqenable_arcin_v5,
-	.irqdisable	= icside_irqdisable_arcin_v5,
-};
-
-
-/* ---------------- Version 6 PCB Support Functions --------------------- */
-/* Prototype: icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
- * Purpose  : enable interrupts from card
- */
-static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
-{
-	struct icside_state *state = ec->irq_data;
-	void __iomem *base = state->irq_port;
-
-	state->enabled = 1;
-
-	switch (state->channel) {
-	case 0:
-		writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
-		readb(base + ICS_ARCIN_V6_INTROFFSET_2);
-		break;
-	case 1:
-		writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
-		readb(base + ICS_ARCIN_V6_INTROFFSET_1);
-		break;
-	}
-}
-
-/* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
- * Purpose  : disable interrupts from card
- */
-static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
-{
-	struct icside_state *state = ec->irq_data;
-
-	state->enabled = 0;
-
-	readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
-	readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-}
-
-/* Prototype: icside_irqprobe(struct expansion_card *ec)
- * Purpose  : detect an active interrupt from card
- */
-static int icside_irqpending_arcin_v6(struct expansion_card *ec)
-{
-	struct icside_state *state = ec->irq_data;
-
-	return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 ||
-	       readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1;
-}
-
-static const expansioncard_ops_t icside_ops_arcin_v6 = {
-	.irqenable	= icside_irqenable_arcin_v6,
-	.irqdisable	= icside_irqdisable_arcin_v6,
-	.irqpending	= icside_irqpending_arcin_v6,
-};
-
-/*
- * Handle routing of interrupts.  This is called before
- * we write the command to the drive.
- */
-static void icside_maskproc(ide_drive_t *drive, int mask)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-	struct expansion_card *ec = ECARD_DEV(hwif->dev);
-	struct icside_state *state = ecard_get_drvdata(ec);
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	state->channel = hwif->channel;
-
-	if (state->enabled && !mask) {
-		switch (hwif->channel) {
-		case 0:
-			writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
-			readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-			break;
-		case 1:
-			writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-			readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
-			break;
-		}
-	} else {
-		readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-		readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
-	}
-
-	local_irq_restore(flags);
-}
-
-static const struct ide_port_ops icside_v6_no_dma_port_ops = {
-	.maskproc		= icside_maskproc,
-};
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
-/*
- * SG-DMA support.
- *
- * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers.
- * There is only one DMA controller per card, which means that only
- * one drive can be accessed at one time.  NOTE! We do not enforce that
- * here, but we rely on the main IDE driver spotting that both
- * interfaces use the same IRQ, which should guarantee this.
- */
-
-/*
- * Configure the IOMD to give the appropriate timings for the transfer
- * mode being requested.  We take the advice of the ATA standards, and
- * calculate the cycle time based on the transfer mode, and the EIDE
- * MW DMA specs that the drive provides in the IDENTIFY command.
- *
- * We have the following IOMD DMA modes to choose from:
- *
- *	Type	Active		Recovery	Cycle
- *	A	250 (250)	312 (550)	562 (800)
- *	B	187		250		437
- *	C	125 (125)	125 (375)	250 (500)
- *	D	62		125		187
- *
- * (figures in brackets are actual measured timings)
- *
- * However, we also need to take care of the read/write active and
- * recovery timings:
- *
- *			Read	Write
- *  	Mode	Active	-- Recovery --	Cycle	IOMD type
- *	MW0	215	50	215	480	A
- *	MW1	80	50	50	150	C
- *	MW2	70	25	25	120	C
- */
-static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
-{
-	int cycle_time, use_dma_info = 0;
-
-	switch (xfer_mode) {
-	case XFER_MW_DMA_2:
-		cycle_time = 250;
-		use_dma_info = 1;
-		break;
-
-	case XFER_MW_DMA_1:
-		cycle_time = 250;
-		use_dma_info = 1;
-		break;
-
-	case XFER_MW_DMA_0:
-		cycle_time = 480;
-		break;
-
-	case XFER_SW_DMA_2:
-	case XFER_SW_DMA_1:
-	case XFER_SW_DMA_0:
-		cycle_time = 480;
-		break;
-	}
-
-	/*
-	 * If we're going to be doing MW_DMA_1 or MW_DMA_2, we should
-	 * take care to note the values in the ID...
-	 */
-	if (use_dma_info && drive->id[ATA_ID_EIDE_DMA_TIME] > cycle_time)
-		cycle_time = drive->id[ATA_ID_EIDE_DMA_TIME];
-
-	drive->drive_data = cycle_time;
-
-	printk("%s: %s selected (peak %dMB/s)\n", drive->name,
-		ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data);
-}
-
-static const struct ide_port_ops icside_v6_port_ops = {
-	.set_dma_mode		= icside_set_dma_mode,
-	.maskproc		= icside_maskproc,
-};
-
-static void icside_dma_host_set(ide_drive_t *drive, int on)
-{
-}
-
-static int icside_dma_end(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-	struct expansion_card *ec = ECARD_DEV(hwif->dev);
-
-	drive->waiting_for_dma = 0;
-
-	disable_dma(ec->dma);
-
-	/* Teardown mappings after DMA has completed. */
-	ide_destroy_dmatable(drive);
-
-	return get_dma_residue(ec->dma) != 0;
-}
-
-static void icside_dma_start(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-	struct expansion_card *ec = ECARD_DEV(hwif->dev);
-
-	/* We can not enable DMA on both channels simultaneously. */
-	BUG_ON(dma_channel_active(ec->dma));
-	enable_dma(ec->dma);
-}
-
-static int icside_dma_setup(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-	struct expansion_card *ec = ECARD_DEV(hwif->dev);
-	struct icside_state *state = ecard_get_drvdata(ec);
-	struct request *rq = hwif->hwgroup->rq;
-	unsigned int dma_mode;
-
-	if (rq_data_dir(rq))
-		dma_mode = DMA_MODE_WRITE;
-	else
-		dma_mode = DMA_MODE_READ;
-
-	/*
-	 * We can not enable DMA on both channels.
-	 */
-	BUG_ON(dma_channel_active(ec->dma));
-
-	hwif->sg_nents = ide_build_sglist(drive, rq);
-
-	/*
-	 * Ensure that we have the right interrupt routed.
-	 */
-	icside_maskproc(drive, 0);
-
-	/*
-	 * Route the DMA signals to the correct interface.
-	 */
-	writeb(state->sel | hwif->channel, state->ioc_base);
-
-	/*
-	 * Select the correct timing for this drive.
-	 */
-	set_dma_speed(ec->dma, drive->drive_data);
-
-	/*
-	 * Tell the DMA engine about the SG table and
-	 * data direction.
-	 */
-	set_dma_sg(ec->dma, hwif->sg_table, hwif->sg_nents);
-	set_dma_mode(ec->dma, dma_mode);
-
-	drive->waiting_for_dma = 1;
-
-	return 0;
-}
-
-static void icside_dma_exec_cmd(ide_drive_t *drive, u8 cmd)
-{
-	/* issue cmd to drive */
-	ide_execute_command(drive, cmd, ide_dma_intr, 2 * WAIT_CMD, NULL);
-}
-
-static int icside_dma_test_irq(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-	struct expansion_card *ec = ECARD_DEV(hwif->dev);
-	struct icside_state *state = ecard_get_drvdata(ec);
-
-	return readb(state->irq_port +
-		     (hwif->channel ?
-			ICS_ARCIN_V6_INTRSTAT_2 :
-			ICS_ARCIN_V6_INTRSTAT_1)) & 1;
-}
-
-static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
-	hwif->dmatable_cpu	= NULL;
-	hwif->dmatable_dma	= 0;
-
-	return 0;
-}
-
-static const struct ide_dma_ops icside_v6_dma_ops = {
-	.dma_host_set		= icside_dma_host_set,
-	.dma_setup		= icside_dma_setup,
-	.dma_exec_cmd		= icside_dma_exec_cmd,
-	.dma_start		= icside_dma_start,
-	.dma_end		= icside_dma_end,
-	.dma_test_irq		= icside_dma_test_irq,
-	.dma_timeout		= ide_dma_timeout,
-	.dma_lost_irq		= ide_dma_lost_irq,
-};
-#else
-#define icside_v6_dma_ops NULL
-#endif
-
-static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
-	return -EOPNOTSUPP;
-}
-
-static void icside_setup_ports(hw_regs_t *hw, void __iomem *base,
-			       struct cardinfo *info, struct expansion_card *ec)
-{
-	unsigned long port = (unsigned long)base + info->dataoffset;
-
-	hw->io_ports.data_addr	 = port;
-	hw->io_ports.error_addr	 = port + (1 << info->stepping);
-	hw->io_ports.nsect_addr	 = port + (2 << info->stepping);
-	hw->io_ports.lbal_addr	 = port + (3 << info->stepping);
-	hw->io_ports.lbam_addr	 = port + (4 << info->stepping);
-	hw->io_ports.lbah_addr	 = port + (5 << info->stepping);
-	hw->io_ports.device_addr = port + (6 << info->stepping);
-	hw->io_ports.status_addr = port + (7 << info->stepping);
-	hw->io_ports.ctl_addr	 = (unsigned long)base + info->ctrloffset;
-
-	hw->irq = ec->irq;
-	hw->dev = &ec->dev;
-	hw->chipset = ide_acorn;
-}
-
-static int __init
-icside_register_v5(struct icside_state *state, struct expansion_card *ec)
-{
-	void __iomem *base;
-	struct ide_host *host;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	int ret;
-
-	base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
-	if (!base)
-		return -ENOMEM;
-
-	state->irq_port = base;
-
-	ec->irqaddr  = base + ICS_ARCIN_V5_INTRSTAT;
-	ec->irqmask  = 1;
-
-	ecard_setirq(ec, &icside_ops_arcin_v5, state);
-
-	/*
-	 * Be on the safe side - disable interrupts
-	 */
-	icside_irqdisable_arcin_v5(ec, 0);
-
-	icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec);
-
-	host = ide_host_alloc(NULL, hws);
-	if (host == NULL)
-		return -ENODEV;
-
-	state->host = host;
-
-	ecard_set_drvdata(ec, state);
-
-	ret = ide_host_register(host, NULL, hws);
-	if (ret)
-		goto err_free;
-
-	return 0;
-err_free:
-	ide_host_free(host);
-	ecard_set_drvdata(ec, NULL);
-	return ret;
-}
-
-static const struct ide_port_info icside_v6_port_info __initdata = {
-	.init_dma		= icside_dma_off_init,
-	.port_ops		= &icside_v6_no_dma_port_ops,
-	.dma_ops		= &icside_v6_dma_ops,
-	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
-	.mwdma_mask		= ATA_MWDMA2,
-	.swdma_mask		= ATA_SWDMA2,
-};
-
-static int __init
-icside_register_v6(struct icside_state *state, struct expansion_card *ec)
-{
-	void __iomem *ioc_base, *easi_base;
-	struct ide_host *host;
-	unsigned int sel = 0;
-	int ret;
-	hw_regs_t hw[2], *hws[] = { &hw[0], NULL, NULL, NULL };
-	struct ide_port_info d = icside_v6_port_info;
-
-	ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
-	if (!ioc_base) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	easi_base = ioc_base;
-
-	if (ecard_resource_flags(ec, ECARD_RES_EASI)) {
-		easi_base = ecardm_iomap(ec, ECARD_RES_EASI, 0, 0);
-		if (!easi_base) {
-			ret = -ENOMEM;
-			goto out;
-		}
-
-		/*
-		 * Enable access to the EASI region.
-		 */
-		sel = 1 << 5;
-	}
-
-	writeb(sel, ioc_base);
-
-	ecard_setirq(ec, &icside_ops_arcin_v6, state);
-
-	state->irq_port   = easi_base;
-	state->ioc_base   = ioc_base;
-	state->sel	  = sel;
-
-	/*
-	 * Be on the safe side - disable interrupts
-	 */
-	icside_irqdisable_arcin_v6(ec, 0);
-
-	icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec);
-	icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec);
-
-	host = ide_host_alloc(&d, hws);
-	if (host == NULL)
-		return -ENODEV;
-
-	state->host = host;
-
-	ecard_set_drvdata(ec, state);
-
-	if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
-		d.init_dma = icside_dma_init;
-		d.port_ops = &icside_v6_port_ops;
-		d.dma_ops = NULL;
-	}
-
-	ret = ide_host_register(host, NULL, hws);
-	if (ret)
-		goto err_free;
-
-	return 0;
-err_free:
-	ide_host_free(host);
-	if (d.dma_ops)
-		free_dma(ec->dma);
-	ecard_set_drvdata(ec, NULL);
-out:
-	return ret;
-}
-
-static int __devinit
-icside_probe(struct expansion_card *ec, const struct ecard_id *id)
-{
-	struct icside_state *state;
-	void __iomem *idmem;
-	int ret;
-
-	ret = ecard_request_resources(ec);
-	if (ret)
-		goto out;
-
-	state = kzalloc(sizeof(struct icside_state), GFP_KERNEL);
-	if (!state) {
-		ret = -ENOMEM;
-		goto release;
-	}
-
-	state->type	= ICS_TYPE_NOTYPE;
-
-	idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
-	if (idmem) {
-		unsigned int type;
-
-		type = readb(idmem + ICS_IDENT_OFFSET) & 1;
-		type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1;
-		type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2;
-		type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3;
-		ecardm_iounmap(ec, idmem);
-
-		state->type = type;
-	}
-
-	switch (state->type) {
-	case ICS_TYPE_A3IN:
-		dev_warn(&ec->dev, "A3IN unsupported\n");
-		ret = -ENODEV;
-		break;
-
-	case ICS_TYPE_A3USER:
-		dev_warn(&ec->dev, "A3USER unsupported\n");
-		ret = -ENODEV;
-		break;
-
-	case ICS_TYPE_V5:
-		ret = icside_register_v5(state, ec);
-		break;
-
-	case ICS_TYPE_V6:
-		ret = icside_register_v6(state, ec);
-		break;
-
-	default:
-		dev_warn(&ec->dev, "unknown interface type\n");
-		ret = -ENODEV;
-		break;
-	}
-
-	if (ret == 0)
-		goto out;
-
-	kfree(state);
- release:
-	ecard_release_resources(ec);
- out:
-	return ret;
-}
-
-static void __devexit icside_remove(struct expansion_card *ec)
-{
-	struct icside_state *state = ecard_get_drvdata(ec);
-
-	switch (state->type) {
-	case ICS_TYPE_V5:
-		/* FIXME: tell IDE to stop using the interface */
-
-		/* Disable interrupts */
-		icside_irqdisable_arcin_v5(ec, 0);
-		break;
-
-	case ICS_TYPE_V6:
-		/* FIXME: tell IDE to stop using the interface */
-		if (ec->dma != NO_DMA)
-			free_dma(ec->dma);
-
-		/* Disable interrupts */
-		icside_irqdisable_arcin_v6(ec, 0);
-
-		/* Reset the ROM pointer/EASI selection */
-		writeb(0, state->ioc_base);
-		break;
-	}
-
-	ecard_set_drvdata(ec, NULL);
-
-	kfree(state);
-	ecard_release_resources(ec);
-}
-
-static void icside_shutdown(struct expansion_card *ec)
-{
-	struct icside_state *state = ecard_get_drvdata(ec);
-	unsigned long flags;
-
-	/*
-	 * Disable interrupts from this card.  We need to do
-	 * this before disabling EASI since we may be accessing
-	 * this register via that region.
-	 */
-	local_irq_save(flags);
-	ec->ops->irqdisable(ec, 0);
-	local_irq_restore(flags);
-
-	/*
-	 * Reset the ROM pointer so that we can read the ROM
-	 * after a soft reboot.  This also disables access to
-	 * the IDE taskfile via the EASI region.
-	 */
-	if (state->ioc_base)
-		writeb(0, state->ioc_base);
-}
-
-static const struct ecard_id icside_ids[] = {
-	{ MANU_ICS,  PROD_ICS_IDE  },
-	{ MANU_ICS2, PROD_ICS2_IDE },
-	{ 0xffff, 0xffff }
-};
-
-static struct ecard_driver icside_driver = {
-	.probe		= icside_probe,
-	.remove		= __devexit_p(icside_remove),
-	.shutdown	= icside_shutdown,
-	.id_table	= icside_ids,
-	.drv = {
-		.name	= "icside",
-	},
-};
-
-static int __init icside_init(void)
-{
-	return ecard_register_driver(&icside_driver);
-}
-
-static void __exit icside_exit(void);
-{
-	ecard_unregister_driver(&icside_driver);
-}
-
-MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("ICS IDE driver");
-
-module_init(icside_init);
-module_exit(icside_exit);
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
deleted file mode 100644
index 78d27d9..0000000
--- a/drivers/ide/arm/rapide.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Copyright (c) 1996-2002 Russell King.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
-#include <linux/errno.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/ecard.h>
-
-static struct const ide_port_info rapide_port_info = {
-	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
-};
-
-static void rapide_setup_ports(hw_regs_t *hw, void __iomem *base,
-			       void __iomem *ctrl, unsigned int sz, int irq)
-{
-	unsigned long port = (unsigned long)base;
-	int i;
-
-	for (i = 0; i <= 7; i++) {
-		hw->io_ports_array[i] = port;
-		port += sz;
-	}
-	hw->io_ports.ctl_addr = (unsigned long)ctrl;
-	hw->irq = irq;
-}
-
-static int __devinit
-rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
-{
-	void __iomem *base;
-	struct ide_host *host;
-	int ret;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-
-	ret = ecard_request_resources(ec);
-	if (ret)
-		goto out;
-
-	base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
-	if (!base) {
-		ret = -ENOMEM;
-		goto release;
-	}
-
-	memset(&hw, 0, sizeof(hw));
-	rapide_setup_ports(&hw, base, base + 0x818, 1 << 6, ec->irq);
-	hw.chipset = ide_generic;
-	hw.dev = &ec->dev;
-
-	ret = ide_host_add(&rapide_port_info, hws, &host);
-	if (ret)
-		goto release;
-
-	ecard_set_drvdata(ec, host);
-	goto out;
-
- release:
-	ecard_release_resources(ec);
- out:
-	return ret;
-}
-
-static void __devexit rapide_remove(struct expansion_card *ec)
-{
-	struct ide_host *host = ecard_get_drvdata(ec);
-
-	ecard_set_drvdata(ec, NULL);
-
-	ide_host_remove(host);
-
-	ecard_release_resources(ec);
-}
-
-static struct ecard_id rapide_ids[] = {
-	{ MANU_YELLOWSTONE, PROD_YELLOWSTONE_RAPIDE32 },
-	{ 0xffff, 0xffff }
-};
-
-static struct ecard_driver rapide_driver = {
-	.probe		= rapide_probe,
-	.remove		= __devexit_p(rapide_remove),
-	.id_table	= rapide_ids,
-	.drv = {
-		.name	= "rapide",
-	},
-};
-
-static int __init rapide_init(void)
-{
-	return ecard_register_driver(&rapide_driver);
-}
-
-static void __exit rapide_exit(void)
-{
-	ecard_unregister_driver(&rapide_driver);
-}
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Yellowstone RAPIDE driver");
-
-module_init(rapide_init);
-module_exit(rapide_exit);
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/atiixp.c
similarity index 100%
rename from drivers/ide/pci/atiixp.c
rename to drivers/ide/atiixp.c
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
similarity index 100%
rename from drivers/ide/mips/au1xxx-ide.c
rename to drivers/ide/au1xxx-ide.c
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/buddha.c
similarity index 100%
rename from drivers/ide/legacy/buddha.c
rename to drivers/ide/buddha.c
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/cmd640.c
similarity index 100%
rename from drivers/ide/pci/cmd640.c
rename to drivers/ide/cmd640.c
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/cmd64x.c
similarity index 100%
rename from drivers/ide/pci/cmd64x.c
rename to drivers/ide/cmd64x.c
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/cs5520.c
similarity index 100%
rename from drivers/ide/pci/cs5520.c
rename to drivers/ide/cs5520.c
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/cs5530.c
similarity index 100%
rename from drivers/ide/pci/cs5530.c
rename to drivers/ide/cs5530.c
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/cs5535.c
similarity index 100%
rename from drivers/ide/pci/cs5535.c
rename to drivers/ide/cs5535.c
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/cy82c693.c
similarity index 100%
rename from drivers/ide/pci/cy82c693.c
rename to drivers/ide/cy82c693.c
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/delkin_cb.c
similarity index 100%
rename from drivers/ide/pci/delkin_cb.c
rename to drivers/ide/delkin_cb.c
diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/dtc2278.c
similarity index 100%
rename from drivers/ide/legacy/dtc2278.c
rename to drivers/ide/dtc2278.c
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/falconide.c
similarity index 100%
rename from drivers/ide/legacy/falconide.c
rename to drivers/ide/falconide.c
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/gayle.c
similarity index 100%
rename from drivers/ide/legacy/gayle.c
rename to drivers/ide/gayle.c
diff --git a/drivers/ide/h8300/Makefile b/drivers/ide/h8300/Makefile
deleted file mode 100644
index 5eba16f..0000000
--- a/drivers/ide/h8300/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-
-obj-$(CONFIG_IDE_H8300)			+= ide-h8300.o
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/hpt366.c
similarity index 100%
rename from drivers/ide/pci/hpt366.c
rename to drivers/ide/hpt366.c
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/ht6560b.c
similarity index 100%
rename from drivers/ide/legacy/ht6560b.c
rename to drivers/ide/ht6560b.c
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
new file mode 100644
index 0000000..2d84801
--- /dev/null
+++ b/drivers/ide/icside.c
@@ -0,0 +1,703 @@
+/*
+ * Copyright (c) 1996-2004 Russell King.
+ *
+ * Please note that this platform does not support 32-bit IDE IO.
+ */
+
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/errno.h>
+#include <linux/ide.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/scatterlist.h>
+#include <linux/io.h>
+
+#include <asm/dma.h>
+#include <asm/ecard.h>
+
+#define DRV_NAME "icside"
+
+#define ICS_IDENT_OFFSET		0x2280
+
+#define ICS_ARCIN_V5_INTRSTAT		0x0000
+#define ICS_ARCIN_V5_INTROFFSET		0x0004
+#define ICS_ARCIN_V5_IDEOFFSET		0x2800
+#define ICS_ARCIN_V5_IDEALTOFFSET	0x2b80
+#define ICS_ARCIN_V5_IDESTEPPING	6
+
+#define ICS_ARCIN_V6_IDEOFFSET_1	0x2000
+#define ICS_ARCIN_V6_INTROFFSET_1	0x2200
+#define ICS_ARCIN_V6_INTRSTAT_1		0x2290
+#define ICS_ARCIN_V6_IDEALTOFFSET_1	0x2380
+#define ICS_ARCIN_V6_IDEOFFSET_2	0x3000
+#define ICS_ARCIN_V6_INTROFFSET_2	0x3200
+#define ICS_ARCIN_V6_INTRSTAT_2		0x3290
+#define ICS_ARCIN_V6_IDEALTOFFSET_2	0x3380
+#define ICS_ARCIN_V6_IDESTEPPING	6
+
+struct cardinfo {
+	unsigned int dataoffset;
+	unsigned int ctrloffset;
+	unsigned int stepping;
+};
+
+static struct cardinfo icside_cardinfo_v5 = {
+	.dataoffset	= ICS_ARCIN_V5_IDEOFFSET,
+	.ctrloffset	= ICS_ARCIN_V5_IDEALTOFFSET,
+	.stepping	= ICS_ARCIN_V5_IDESTEPPING,
+};
+
+static struct cardinfo icside_cardinfo_v6_1 = {
+	.dataoffset	= ICS_ARCIN_V6_IDEOFFSET_1,
+	.ctrloffset	= ICS_ARCIN_V6_IDEALTOFFSET_1,
+	.stepping	= ICS_ARCIN_V6_IDESTEPPING,
+};
+
+static struct cardinfo icside_cardinfo_v6_2 = {
+	.dataoffset	= ICS_ARCIN_V6_IDEOFFSET_2,
+	.ctrloffset	= ICS_ARCIN_V6_IDEALTOFFSET_2,
+	.stepping	= ICS_ARCIN_V6_IDESTEPPING,
+};
+
+struct icside_state {
+	unsigned int channel;
+	unsigned int enabled;
+	void __iomem *irq_port;
+	void __iomem *ioc_base;
+	unsigned int sel;
+	unsigned int type;
+	struct ide_host *host;
+};
+
+#define ICS_TYPE_A3IN	0
+#define ICS_TYPE_A3USER	1
+#define ICS_TYPE_V6	3
+#define ICS_TYPE_V5	15
+#define ICS_TYPE_NOTYPE	((unsigned int)-1)
+
+/* ---------------- Version 5 PCB Support Functions --------------------- */
+/* Prototype: icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
+ * Purpose  : enable interrupts from card
+ */
+static void icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
+{
+	struct icside_state *state = ec->irq_data;
+
+	writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET);
+}
+
+/* Prototype: icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
+ * Purpose  : disable interrupts from card
+ */
+static void icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
+{
+	struct icside_state *state = ec->irq_data;
+
+	readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET);
+}
+
+static const expansioncard_ops_t icside_ops_arcin_v5 = {
+	.irqenable	= icside_irqenable_arcin_v5,
+	.irqdisable	= icside_irqdisable_arcin_v5,
+};
+
+
+/* ---------------- Version 6 PCB Support Functions --------------------- */
+/* Prototype: icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
+ * Purpose  : enable interrupts from card
+ */
+static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
+{
+	struct icside_state *state = ec->irq_data;
+	void __iomem *base = state->irq_port;
+
+	state->enabled = 1;
+
+	switch (state->channel) {
+	case 0:
+		writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
+		readb(base + ICS_ARCIN_V6_INTROFFSET_2);
+		break;
+	case 1:
+		writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
+		readb(base + ICS_ARCIN_V6_INTROFFSET_1);
+		break;
+	}
+}
+
+/* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
+ * Purpose  : disable interrupts from card
+ */
+static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
+{
+	struct icside_state *state = ec->irq_data;
+
+	state->enabled = 0;
+
+	readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
+	readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
+}
+
+/* Prototype: icside_irqprobe(struct expansion_card *ec)
+ * Purpose  : detect an active interrupt from card
+ */
+static int icside_irqpending_arcin_v6(struct expansion_card *ec)
+{
+	struct icside_state *state = ec->irq_data;
+
+	return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 ||
+	       readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1;
+}
+
+static const expansioncard_ops_t icside_ops_arcin_v6 = {
+	.irqenable	= icside_irqenable_arcin_v6,
+	.irqdisable	= icside_irqdisable_arcin_v6,
+	.irqpending	= icside_irqpending_arcin_v6,
+};
+
+/*
+ * Handle routing of interrupts.  This is called before
+ * we write the command to the drive.
+ */
+static void icside_maskproc(ide_drive_t *drive, int mask)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	struct expansion_card *ec = ECARD_DEV(hwif->dev);
+	struct icside_state *state = ecard_get_drvdata(ec);
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	state->channel = hwif->channel;
+
+	if (state->enabled && !mask) {
+		switch (hwif->channel) {
+		case 0:
+			writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
+			readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
+			break;
+		case 1:
+			writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
+			readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
+			break;
+		}
+	} else {
+		readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
+		readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
+	}
+
+	local_irq_restore(flags);
+}
+
+static const struct ide_port_ops icside_v6_no_dma_port_ops = {
+	.maskproc		= icside_maskproc,
+};
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
+/*
+ * SG-DMA support.
+ *
+ * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers.
+ * There is only one DMA controller per card, which means that only
+ * one drive can be accessed at one time.  NOTE! We do not enforce that
+ * here, but we rely on the main IDE driver spotting that both
+ * interfaces use the same IRQ, which should guarantee this.
+ */
+
+/*
+ * Configure the IOMD to give the appropriate timings for the transfer
+ * mode being requested.  We take the advice of the ATA standards, and
+ * calculate the cycle time based on the transfer mode, and the EIDE
+ * MW DMA specs that the drive provides in the IDENTIFY command.
+ *
+ * We have the following IOMD DMA modes to choose from:
+ *
+ *	Type	Active		Recovery	Cycle
+ *	A	250 (250)	312 (550)	562 (800)
+ *	B	187		250		437
+ *	C	125 (125)	125 (375)	250 (500)
+ *	D	62		125		187
+ *
+ * (figures in brackets are actual measured timings)
+ *
+ * However, we also need to take care of the read/write active and
+ * recovery timings:
+ *
+ *			Read	Write
+ *  	Mode	Active	-- Recovery --	Cycle	IOMD type
+ *	MW0	215	50	215	480	A
+ *	MW1	80	50	50	150	C
+ *	MW2	70	25	25	120	C
+ */
+static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
+{
+	int cycle_time, use_dma_info = 0;
+
+	switch (xfer_mode) {
+	case XFER_MW_DMA_2:
+		cycle_time = 250;
+		use_dma_info = 1;
+		break;
+
+	case XFER_MW_DMA_1:
+		cycle_time = 250;
+		use_dma_info = 1;
+		break;
+
+	case XFER_MW_DMA_0:
+		cycle_time = 480;
+		break;
+
+	case XFER_SW_DMA_2:
+	case XFER_SW_DMA_1:
+	case XFER_SW_DMA_0:
+		cycle_time = 480;
+		break;
+	}
+
+	/*
+	 * If we're going to be doing MW_DMA_1 or MW_DMA_2, we should
+	 * take care to note the values in the ID...
+	 */
+	if (use_dma_info && drive->id[ATA_ID_EIDE_DMA_TIME] > cycle_time)
+		cycle_time = drive->id[ATA_ID_EIDE_DMA_TIME];
+
+	drive->drive_data = cycle_time;
+
+	printk("%s: %s selected (peak %dMB/s)\n", drive->name,
+		ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data);
+}
+
+static const struct ide_port_ops icside_v6_port_ops = {
+	.set_dma_mode		= icside_set_dma_mode,
+	.maskproc		= icside_maskproc,
+};
+
+static void icside_dma_host_set(ide_drive_t *drive, int on)
+{
+}
+
+static int icside_dma_end(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	struct expansion_card *ec = ECARD_DEV(hwif->dev);
+
+	drive->waiting_for_dma = 0;
+
+	disable_dma(ec->dma);
+
+	/* Teardown mappings after DMA has completed. */
+	ide_destroy_dmatable(drive);
+
+	return get_dma_residue(ec->dma) != 0;
+}
+
+static void icside_dma_start(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	struct expansion_card *ec = ECARD_DEV(hwif->dev);
+
+	/* We can not enable DMA on both channels simultaneously. */
+	BUG_ON(dma_channel_active(ec->dma));
+	enable_dma(ec->dma);
+}
+
+static int icside_dma_setup(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	struct expansion_card *ec = ECARD_DEV(hwif->dev);
+	struct icside_state *state = ecard_get_drvdata(ec);
+	struct request *rq = hwif->hwgroup->rq;
+	unsigned int dma_mode;
+
+	if (rq_data_dir(rq))
+		dma_mode = DMA_MODE_WRITE;
+	else
+		dma_mode = DMA_MODE_READ;
+
+	/*
+	 * We can not enable DMA on both channels.
+	 */
+	BUG_ON(dma_channel_active(ec->dma));
+
+	hwif->sg_nents = ide_build_sglist(drive, rq);
+
+	/*
+	 * Ensure that we have the right interrupt routed.
+	 */
+	icside_maskproc(drive, 0);
+
+	/*
+	 * Route the DMA signals to the correct interface.
+	 */
+	writeb(state->sel | hwif->channel, state->ioc_base);
+
+	/*
+	 * Select the correct timing for this drive.
+	 */
+	set_dma_speed(ec->dma, drive->drive_data);
+
+	/*
+	 * Tell the DMA engine about the SG table and
+	 * data direction.
+	 */
+	set_dma_sg(ec->dma, hwif->sg_table, hwif->sg_nents);
+	set_dma_mode(ec->dma, dma_mode);
+
+	drive->waiting_for_dma = 1;
+
+	return 0;
+}
+
+static void icside_dma_exec_cmd(ide_drive_t *drive, u8 cmd)
+{
+	/* issue cmd to drive */
+	ide_execute_command(drive, cmd, ide_dma_intr, 2 * WAIT_CMD, NULL);
+}
+
+static int icside_dma_test_irq(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	struct expansion_card *ec = ECARD_DEV(hwif->dev);
+	struct icside_state *state = ecard_get_drvdata(ec);
+
+	return readb(state->irq_port +
+		     (hwif->channel ?
+			ICS_ARCIN_V6_INTRSTAT_2 :
+			ICS_ARCIN_V6_INTRSTAT_1)) & 1;
+}
+
+static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
+{
+	hwif->dmatable_cpu	= NULL;
+	hwif->dmatable_dma	= 0;
+
+	return 0;
+}
+
+static const struct ide_dma_ops icside_v6_dma_ops = {
+	.dma_host_set		= icside_dma_host_set,
+	.dma_setup		= icside_dma_setup,
+	.dma_exec_cmd		= icside_dma_exec_cmd,
+	.dma_start		= icside_dma_start,
+	.dma_end		= icside_dma_end,
+	.dma_test_irq		= icside_dma_test_irq,
+	.dma_timeout		= ide_dma_timeout,
+	.dma_lost_irq		= ide_dma_lost_irq,
+};
+#else
+#define icside_v6_dma_ops NULL
+#endif
+
+static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d)
+{
+	return -EOPNOTSUPP;
+}
+
+static void icside_setup_ports(hw_regs_t *hw, void __iomem *base,
+			       struct cardinfo *info, struct expansion_card *ec)
+{
+	unsigned long port = (unsigned long)base + info->dataoffset;
+
+	hw->io_ports.data_addr	 = port;
+	hw->io_ports.error_addr	 = port + (1 << info->stepping);
+	hw->io_ports.nsect_addr	 = port + (2 << info->stepping);
+	hw->io_ports.lbal_addr	 = port + (3 << info->stepping);
+	hw->io_ports.lbam_addr	 = port + (4 << info->stepping);
+	hw->io_ports.lbah_addr	 = port + (5 << info->stepping);
+	hw->io_ports.device_addr = port + (6 << info->stepping);
+	hw->io_ports.status_addr = port + (7 << info->stepping);
+	hw->io_ports.ctl_addr	 = (unsigned long)base + info->ctrloffset;
+
+	hw->irq = ec->irq;
+	hw->dev = &ec->dev;
+	hw->chipset = ide_acorn;
+}
+
+static int __init
+icside_register_v5(struct icside_state *state, struct expansion_card *ec)
+{
+	void __iomem *base;
+	struct ide_host *host;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	int ret;
+
+	base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
+	if (!base)
+		return -ENOMEM;
+
+	state->irq_port = base;
+
+	ec->irqaddr  = base + ICS_ARCIN_V5_INTRSTAT;
+	ec->irqmask  = 1;
+
+	ecard_setirq(ec, &icside_ops_arcin_v5, state);
+
+	/*
+	 * Be on the safe side - disable interrupts
+	 */
+	icside_irqdisable_arcin_v5(ec, 0);
+
+	icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec);
+
+	host = ide_host_alloc(NULL, hws);
+	if (host == NULL)
+		return -ENODEV;
+
+	state->host = host;
+
+	ecard_set_drvdata(ec, state);
+
+	ret = ide_host_register(host, NULL, hws);
+	if (ret)
+		goto err_free;
+
+	return 0;
+err_free:
+	ide_host_free(host);
+	ecard_set_drvdata(ec, NULL);
+	return ret;
+}
+
+static const struct ide_port_info icside_v6_port_info __initdata = {
+	.init_dma		= icside_dma_off_init,
+	.port_ops		= &icside_v6_no_dma_port_ops,
+	.dma_ops		= &icside_v6_dma_ops,
+	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
+	.mwdma_mask		= ATA_MWDMA2,
+	.swdma_mask		= ATA_SWDMA2,
+};
+
+static int __init
+icside_register_v6(struct icside_state *state, struct expansion_card *ec)
+{
+	void __iomem *ioc_base, *easi_base;
+	struct ide_host *host;
+	unsigned int sel = 0;
+	int ret;
+	hw_regs_t hw[2], *hws[] = { &hw[0], NULL, NULL, NULL };
+	struct ide_port_info d = icside_v6_port_info;
+
+	ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
+	if (!ioc_base) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	easi_base = ioc_base;
+
+	if (ecard_resource_flags(ec, ECARD_RES_EASI)) {
+		easi_base = ecardm_iomap(ec, ECARD_RES_EASI, 0, 0);
+		if (!easi_base) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		/*
+		 * Enable access to the EASI region.
+		 */
+		sel = 1 << 5;
+	}
+
+	writeb(sel, ioc_base);
+
+	ecard_setirq(ec, &icside_ops_arcin_v6, state);
+
+	state->irq_port   = easi_base;
+	state->ioc_base   = ioc_base;
+	state->sel	  = sel;
+
+	/*
+	 * Be on the safe side - disable interrupts
+	 */
+	icside_irqdisable_arcin_v6(ec, 0);
+
+	icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec);
+	icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec);
+
+	host = ide_host_alloc(&d, hws);
+	if (host == NULL)
+		return -ENODEV;
+
+	state->host = host;
+
+	ecard_set_drvdata(ec, state);
+
+	if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
+		d.init_dma = icside_dma_init;
+		d.port_ops = &icside_v6_port_ops;
+		d.dma_ops = NULL;
+	}
+
+	ret = ide_host_register(host, NULL, hws);
+	if (ret)
+		goto err_free;
+
+	return 0;
+err_free:
+	ide_host_free(host);
+	if (d.dma_ops)
+		free_dma(ec->dma);
+	ecard_set_drvdata(ec, NULL);
+out:
+	return ret;
+}
+
+static int __devinit
+icside_probe(struct expansion_card *ec, const struct ecard_id *id)
+{
+	struct icside_state *state;
+	void __iomem *idmem;
+	int ret;
+
+	ret = ecard_request_resources(ec);
+	if (ret)
+		goto out;
+
+	state = kzalloc(sizeof(struct icside_state), GFP_KERNEL);
+	if (!state) {
+		ret = -ENOMEM;
+		goto release;
+	}
+
+	state->type	= ICS_TYPE_NOTYPE;
+
+	idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
+	if (idmem) {
+		unsigned int type;
+
+		type = readb(idmem + ICS_IDENT_OFFSET) & 1;
+		type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1;
+		type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2;
+		type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3;
+		ecardm_iounmap(ec, idmem);
+
+		state->type = type;
+	}
+
+	switch (state->type) {
+	case ICS_TYPE_A3IN:
+		dev_warn(&ec->dev, "A3IN unsupported\n");
+		ret = -ENODEV;
+		break;
+
+	case ICS_TYPE_A3USER:
+		dev_warn(&ec->dev, "A3USER unsupported\n");
+		ret = -ENODEV;
+		break;
+
+	case ICS_TYPE_V5:
+		ret = icside_register_v5(state, ec);
+		break;
+
+	case ICS_TYPE_V6:
+		ret = icside_register_v6(state, ec);
+		break;
+
+	default:
+		dev_warn(&ec->dev, "unknown interface type\n");
+		ret = -ENODEV;
+		break;
+	}
+
+	if (ret == 0)
+		goto out;
+
+	kfree(state);
+ release:
+	ecard_release_resources(ec);
+ out:
+	return ret;
+}
+
+static void __devexit icside_remove(struct expansion_card *ec)
+{
+	struct icside_state *state = ecard_get_drvdata(ec);
+
+	switch (state->type) {
+	case ICS_TYPE_V5:
+		/* FIXME: tell IDE to stop using the interface */
+
+		/* Disable interrupts */
+		icside_irqdisable_arcin_v5(ec, 0);
+		break;
+
+	case ICS_TYPE_V6:
+		/* FIXME: tell IDE to stop using the interface */
+		if (ec->dma != NO_DMA)
+			free_dma(ec->dma);
+
+		/* Disable interrupts */
+		icside_irqdisable_arcin_v6(ec, 0);
+
+		/* Reset the ROM pointer/EASI selection */
+		writeb(0, state->ioc_base);
+		break;
+	}
+
+	ecard_set_drvdata(ec, NULL);
+
+	kfree(state);
+	ecard_release_resources(ec);
+}
+
+static void icside_shutdown(struct expansion_card *ec)
+{
+	struct icside_state *state = ecard_get_drvdata(ec);
+	unsigned long flags;
+
+	/*
+	 * Disable interrupts from this card.  We need to do
+	 * this before disabling EASI since we may be accessing
+	 * this register via that region.
+	 */
+	local_irq_save(flags);
+	ec->ops->irqdisable(ec, 0);
+	local_irq_restore(flags);
+
+	/*
+	 * Reset the ROM pointer so that we can read the ROM
+	 * after a soft reboot.  This also disables access to
+	 * the IDE taskfile via the EASI region.
+	 */
+	if (state->ioc_base)
+		writeb(0, state->ioc_base);
+}
+
+static const struct ecard_id icside_ids[] = {
+	{ MANU_ICS,  PROD_ICS_IDE  },
+	{ MANU_ICS2, PROD_ICS2_IDE },
+	{ 0xffff, 0xffff }
+};
+
+static struct ecard_driver icside_driver = {
+	.probe		= icside_probe,
+	.remove		= __devexit_p(icside_remove),
+	.shutdown	= icside_shutdown,
+	.id_table	= icside_ids,
+	.drv = {
+		.name	= "icside",
+	},
+};
+
+static int __init icside_init(void)
+{
+	return ecard_register_driver(&icside_driver);
+}
+
+static void __exit icside_exit(void)
+{
+	ecard_remove_driver(&icside_driver);
+}
+
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ICS IDE driver");
+
+module_init(icside_init);
+module_exit(icside_exit);
diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/ide-4drives.c
similarity index 100%
rename from drivers/ide/legacy/ide-4drives.c
rename to drivers/ide/ide-4drives.c
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 13265a8..48b5eda 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1966,6 +1966,7 @@
 	{ "Optiarc DVD RW AD-5200A", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
 	{ "Optiarc DVD RW AD-7200A", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
 	{ "Optiarc DVD RW AD-7543A", NULL,   IDE_AFLAG_NO_AUTOCLOSE	     },
+	{ "TEAC CD-ROM CD-224E",     NULL,   IDE_AFLAG_NO_AUTOCLOSE	     },
 	{ NULL, NULL, 0 }
 };
 
@@ -2089,17 +2090,15 @@
 #endif
 };
 
-static int idecd_open(struct inode *inode, struct file *file)
+static int idecd_open(struct block_device *bdev, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
-	struct cdrom_info *info;
+	struct cdrom_info *info = ide_cd_get(bdev->bd_disk);
 	int rc = -ENOMEM;
 
-	info = ide_cd_get(disk);
 	if (!info)
 		return -ENXIO;
 
-	rc = cdrom_open(&info->devinfo, inode, file);
+	rc = cdrom_open(&info->devinfo, bdev, mode);
 
 	if (rc < 0)
 		ide_cd_put(info);
@@ -2107,12 +2106,11 @@
 	return rc;
 }
 
-static int idecd_release(struct inode *inode, struct file *file)
+static int idecd_release(struct gendisk *disk, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
 	struct cdrom_info *info = ide_drv_g(disk, cdrom_info);
 
-	cdrom_release(&info->devinfo, file);
+	cdrom_release(&info->devinfo, mode);
 
 	ide_cd_put(info);
 
@@ -2158,10 +2156,9 @@
 	return 0;
 }
 
-static int idecd_ioctl(struct inode *inode, struct file *file,
+static int idecd_ioctl(struct block_device *bdev, fmode_t mode,
 			unsigned int cmd, unsigned long arg)
 {
-	struct block_device *bdev = inode->i_bdev;
 	struct cdrom_info *info = ide_drv_g(bdev->bd_disk, cdrom_info);
 	int err;
 
@@ -2174,9 +2171,9 @@
 		break;
 	}
 
-	err = generic_ide_ioctl(info->drive, file, bdev, cmd, arg);
+	err = generic_ide_ioctl(info->drive, bdev, cmd, arg);
 	if (err == -EINVAL)
-		err = cdrom_ioctl(file, &info->devinfo, inode, cmd, arg);
+		err = cdrom_ioctl(&info->devinfo, bdev, mode, cmd, arg);
 
 	return err;
 }
@@ -2201,7 +2198,7 @@
 	.owner			= THIS_MODULE,
 	.open			= idecd_open,
 	.release		= idecd_release,
-	.ioctl			= idecd_ioctl,
+	.locked_ioctl		= idecd_ioctl,
 	.media_changed		= idecd_media_changed,
 	.revalidate_disk	= idecd_revalidate_disk
 };
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/ide-cs.c
similarity index 100%
rename from drivers/ide/legacy/ide-cs.c
rename to drivers/ide/ide-cs.c
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 223750c..e5adebe 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -600,6 +600,7 @@
 static void ide_disk_setup(ide_drive_t *drive)
 {
 	struct ide_disk_obj *idkp = drive->driver_data;
+	struct request_queue *q = drive->queue;
 	ide_hwif_t *hwif = drive->hwif;
 	u16 *id = drive->id;
 	char *m = (char *)&id[ATA_ID_PROD];
@@ -626,11 +627,14 @@
 		if (max_s > hwif->rqsize)
 			max_s = hwif->rqsize;
 
-		blk_queue_max_sectors(drive->queue, max_s);
+		blk_queue_max_sectors(q, max_s);
 	}
 
 	printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
-			 drive->queue->max_sectors / 2);
+		q->max_sectors / 2);
+
+	if (ata_id_is_ssd(id) || ata_id_is_cfa(id))
+		queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
 
 	/* calculate drive capacity, and select LBA if possible */
 	ide_disk_get_capacity(drive);
diff --git a/drivers/ide/ide-disk.h b/drivers/ide/ide-disk.h
index b234b0f..d511dab 100644
--- a/drivers/ide/ide-disk.h
+++ b/drivers/ide/ide-disk.h
@@ -13,7 +13,7 @@
 ide_decl_devset(acoustic);
 
 /* ide-disk_ioctl.c */
-int ide_disk_ioctl(ide_drive_t *, struct inode *, struct file *, unsigned int,
+int ide_disk_ioctl(ide_drive_t *, struct block_device *, fmode_t, unsigned int,
 		   unsigned long);
 
 #ifdef CONFIG_IDE_PROC_FS
diff --git a/drivers/ide/ide-disk_ioctl.c b/drivers/ide/ide-disk_ioctl.c
index a49698b..7b783dd 100644
--- a/drivers/ide/ide-disk_ioctl.c
+++ b/drivers/ide/ide-disk_ioctl.c
@@ -13,15 +13,14 @@
 { 0 }
 };
 
-int ide_disk_ioctl(ide_drive_t *drive, struct inode *inode, struct file *file,
+int ide_disk_ioctl(ide_drive_t *drive, struct block_device *bdev, fmode_t mode,
 		   unsigned int cmd, unsigned long arg)
 {
-	struct block_device *bdev = inode->i_bdev;
 	int err;
 
 	err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_disk_ioctl_settings);
 	if (err != -EOPNOTSUPP)
 		return err;
 
-	return generic_ide_ioctl(drive, file, bdev, cmd, arg);
+	return generic_ide_ioctl(drive, bdev, cmd, arg);
 }
diff --git a/drivers/ide/ide-floppy.h b/drivers/ide/ide-floppy.h
index c17124d..6dd2beb 100644
--- a/drivers/ide/ide-floppy.h
+++ b/drivers/ide/ide-floppy.h
@@ -23,8 +23,8 @@
 void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *);
 
 /* ide-floppy_ioctl.c */
-int ide_floppy_ioctl(ide_drive_t *, struct inode *, struct file *, unsigned int,
-		     unsigned long);
+int ide_floppy_ioctl(ide_drive_t *, struct block_device *, fmode_t,
+		     unsigned int, unsigned long);
 
 #ifdef CONFIG_IDE_PROC_FS
 /* ide-floppy_proc.c */
diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
index 409e4c1..2bc51ff 100644
--- a/drivers/ide/ide-floppy_ioctl.c
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -241,7 +241,7 @@
 	return 0;
 }
 
-static int ide_floppy_format_ioctl(ide_drive_t *drive, struct file *file,
+static int ide_floppy_format_ioctl(ide_drive_t *drive, fmode_t mode,
 				   unsigned int cmd, void __user *argp)
 {
 	switch (cmd) {
@@ -250,7 +250,7 @@
 	case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
 		return ide_floppy_get_format_capacities(drive, argp);
 	case IDEFLOPPY_IOCTL_FORMAT_START:
-		if (!(file->f_mode & 2))
+		if (!(mode & FMODE_WRITE))
 			return -EPERM;
 		return ide_floppy_format_unit(drive, (int __user *)argp);
 	case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
@@ -260,10 +260,9 @@
 	}
 }
 
-int ide_floppy_ioctl(ide_drive_t *drive, struct inode *inode,
-		     struct file *file, unsigned int cmd, unsigned long arg)
+int ide_floppy_ioctl(ide_drive_t *drive, struct block_device *bdev,
+		     fmode_t mode, unsigned int cmd, unsigned long arg)
 {
-	struct block_device *bdev = inode->i_bdev;
 	struct ide_atapi_pc pc;
 	void __user *argp = (void __user *)arg;
 	int err;
@@ -271,7 +270,7 @@
 	if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR)
 		return ide_floppy_lockdoor(drive, &pc, arg, cmd);
 
-	err = ide_floppy_format_ioctl(drive, file, cmd, argp);
+	err = ide_floppy_format_ioctl(drive, mode, cmd, argp);
 	if (err != -ENOTTY)
 		return err;
 
@@ -280,11 +279,11 @@
 	 * and CDROM_SEND_PACKET (legacy) ioctls
 	 */
 	if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND)
-		err = scsi_cmd_ioctl(file, bdev->bd_disk->queue,
-					bdev->bd_disk, cmd, argp);
+		err = scsi_cmd_ioctl(bdev->bd_disk->queue, bdev->bd_disk,
+				mode, cmd, argp);
 
 	if (err == -ENOTTY)
-		err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
+		err = generic_ide_ioctl(drive, bdev, cmd, arg);
 
 	return err;
 }
diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
index d44898f..7b66628 100644
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -169,9 +169,9 @@
 #endif
 };
 
-static int ide_gd_open(struct inode *inode, struct file *filp)
+static int ide_gd_open(struct block_device *bdev, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
+	struct gendisk *disk = bdev->bd_disk;
 	struct ide_disk_obj *idkp;
 	ide_drive_t *drive;
 	int ret = 0;
@@ -197,12 +197,12 @@
 		 * unreadable disk, so that we can get the format capacity
 		 * of the drive or begin the format - Sam
 		 */
-		if (ret && (filp->f_flags & O_NDELAY) == 0) {
+		if (ret && (mode & FMODE_NDELAY) == 0) {
 			ret = -EIO;
 			goto out_put_idkp;
 		}
 
-		if ((drive->dev_flags & IDE_DFLAG_WP) && (filp->f_mode & 2)) {
+		if ((drive->dev_flags & IDE_DFLAG_WP) && (mode & FMODE_WRITE)) {
 			ret = -EROFS;
 			goto out_put_idkp;
 		}
@@ -214,7 +214,7 @@
 		 */
 		drive->disk_ops->set_doorlock(drive, disk, 1);
 		drive->dev_flags |= IDE_DFLAG_MEDIA_CHANGED;
-		check_disk_change(inode->i_bdev);
+		check_disk_change(bdev);
 	} else if (drive->dev_flags & IDE_DFLAG_FORMAT_IN_PROGRESS) {
 		ret = -EBUSY;
 		goto out_put_idkp;
@@ -227,9 +227,8 @@
 	return ret;
 }
 
-static int ide_gd_release(struct inode *inode, struct file *filp)
+static int ide_gd_release(struct gendisk *disk, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
 	struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
 	ide_drive_t *drive = idkp->drive;
 
@@ -286,21 +285,20 @@
 	return 0;
 }
 
-static int ide_gd_ioctl(struct inode *inode, struct file *file,
+static int ide_gd_ioctl(struct block_device *bdev, fmode_t mode,
 			     unsigned int cmd, unsigned long arg)
 {
-	struct block_device *bdev = inode->i_bdev;
 	struct ide_disk_obj *idkp = ide_drv_g(bdev->bd_disk, ide_disk_obj);
 	ide_drive_t *drive = idkp->drive;
 
-	return drive->disk_ops->ioctl(drive, inode, file, cmd, arg);
+	return drive->disk_ops->ioctl(drive, bdev, mode, cmd, arg);
 }
 
 static struct block_device_operations ide_gd_ops = {
 	.owner			= THIS_MODULE,
 	.open			= ide_gd_open,
 	.release		= ide_gd_release,
-	.ioctl			= ide_gd_ioctl,
+	.locked_ioctl		= ide_gd_ioctl,
 	.getgeo			= ide_gd_getgeo,
 	.media_changed		= ide_gd_media_changed,
 	.revalidate_disk	= ide_gd_revalidate_disk
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/ide-h8300.c
similarity index 100%
rename from drivers/ide/h8300/ide-h8300.c
rename to drivers/ide/ide-h8300.c
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
index a90945f..fcde16b 100644
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -240,8 +240,7 @@
 	return ret;
 }
 
-int generic_ide_ioctl(ide_drive_t *drive, struct file *file,
-		      struct block_device *bdev,
+int generic_ide_ioctl(ide_drive_t *drive, struct block_device *bdev,
 		      unsigned int cmd, unsigned long arg)
 {
 	int err;
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/ide-pci-generic.c
similarity index 100%
rename from drivers/ide/pci/generic.c
rename to drivers/ide/ide-pci-generic.c
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index b2b2e5e..a2d470e 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -2340,35 +2340,30 @@
 	.release	= idetape_chrdev_release,
 };
 
-static int idetape_open(struct inode *inode, struct file *filp)
+static int idetape_open(struct block_device *bdev, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
-	struct ide_tape_obj *tape;
+	struct ide_tape_obj *tape = ide_tape_get(bdev->bd_disk);
 
-	tape = ide_tape_get(disk);
 	if (!tape)
 		return -ENXIO;
 
 	return 0;
 }
 
-static int idetape_release(struct inode *inode, struct file *filp)
+static int idetape_release(struct gendisk *disk, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
 	struct ide_tape_obj *tape = ide_drv_g(disk, ide_tape_obj);
 
 	ide_tape_put(tape);
-
 	return 0;
 }
 
-static int idetape_ioctl(struct inode *inode, struct file *file,
+static int idetape_ioctl(struct block_device *bdev, fmode_t mode,
 			unsigned int cmd, unsigned long arg)
 {
-	struct block_device *bdev = inode->i_bdev;
 	struct ide_tape_obj *tape = ide_drv_g(bdev->bd_disk, ide_tape_obj);
 	ide_drive_t *drive = tape->drive;
-	int err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
+	int err = generic_ide_ioctl(drive, bdev, cmd, arg);
 	if (err == -EINVAL)
 		err = idetape_blkdev_ioctl(drive, cmd, arg);
 	return err;
@@ -2378,7 +2373,7 @@
 	.owner		= THIS_MODULE,
 	.open		= idetape_open,
 	.release	= idetape_release,
-	.ioctl		= idetape_ioctl,
+	.locked_ioctl	= idetape_ioctl,
 };
 
 static int ide_tape_probe(ide_drive_t *drive)
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/ide_arm.c
similarity index 100%
rename from drivers/ide/arm/ide_arm.c
rename to drivers/ide/ide_arm.c
diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/ide_platform.c
similarity index 100%
rename from drivers/ide/legacy/ide_platform.c
rename to drivers/ide/ide_platform.c
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/it8213.c
similarity index 100%
rename from drivers/ide/pci/it8213.c
rename to drivers/ide/it8213.c
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/it821x.c
similarity index 100%
rename from drivers/ide/pci/it821x.c
rename to drivers/ide/it821x.c
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/jmicron.c
similarity index 100%
rename from drivers/ide/pci/jmicron.c
rename to drivers/ide/jmicron.c
diff --git a/drivers/ide/legacy/Makefile b/drivers/ide/legacy/Makefile
deleted file mode 100644
index 6939329..0000000
--- a/drivers/ide/legacy/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-
-# link order is important here
-
-obj-$(CONFIG_BLK_DEV_ALI14XX)		+= ali14xx.o
-obj-$(CONFIG_BLK_DEV_UMC8672)		+= umc8672.o
-obj-$(CONFIG_BLK_DEV_DTC2278)		+= dtc2278.o
-obj-$(CONFIG_BLK_DEV_HT6560B)		+= ht6560b.o
-obj-$(CONFIG_BLK_DEV_QD65XX)		+= qd65xx.o
-obj-$(CONFIG_BLK_DEV_4DRIVES)		+= ide-4drives.o
-
-obj-$(CONFIG_BLK_DEV_GAYLE)		+= gayle.o
-obj-$(CONFIG_BLK_DEV_FALCON_IDE)	+= falconide.o
-obj-$(CONFIG_BLK_DEV_MAC_IDE)		+= macide.o
-obj-$(CONFIG_BLK_DEV_Q40IDE)		+= q40ide.o
-obj-$(CONFIG_BLK_DEV_BUDDHA)		+= buddha.o
-
-ifeq ($(CONFIG_BLK_DEV_IDECS), m)
-	obj-m += ide-cs.o
-endif
-
-ifeq ($(CONFIG_BLK_DEV_PLATFORM), m)
-	obj-m += ide_platform.o
-endif
-
-EXTRA_CFLAGS	:= -Idrivers/ide
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/macide.c
similarity index 100%
rename from drivers/ide/legacy/macide.c
rename to drivers/ide/macide.c
diff --git a/drivers/ide/mips/Makefile b/drivers/ide/mips/Makefile
deleted file mode 100644
index 5873fa0..0000000
--- a/drivers/ide/mips/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_BLK_DEV_IDE_AU1XXX)	+= au1xxx-ide.o
-
-EXTRA_CFLAGS    := -Idrivers/ide
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/ns87415.c
similarity index 100%
rename from drivers/ide/pci/ns87415.c
rename to drivers/ide/ns87415.c
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/opti621.c
similarity index 100%
rename from drivers/ide/pci/opti621.c
rename to drivers/ide/opti621.c
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/palm_bk3710.c
similarity index 100%
rename from drivers/ide/arm/palm_bk3710.c
rename to drivers/ide/palm_bk3710.c
diff --git a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile
deleted file mode 100644
index ab44a1f..0000000
--- a/drivers/ide/pci/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-
-obj-$(CONFIG_BLK_DEV_AEC62XX)		+= aec62xx.o
-obj-$(CONFIG_BLK_DEV_ALI15X3)		+= alim15x3.o
-obj-$(CONFIG_BLK_DEV_AMD74XX)		+= amd74xx.o
-obj-$(CONFIG_BLK_DEV_ATIIXP)		+= atiixp.o
-obj-$(CONFIG_BLK_DEV_CELLEB)		+= scc_pata.o
-obj-$(CONFIG_BLK_DEV_CMD64X)		+= cmd64x.o
-obj-$(CONFIG_BLK_DEV_CS5520)		+= cs5520.o
-obj-$(CONFIG_BLK_DEV_CS5530)		+= cs5530.o
-obj-$(CONFIG_BLK_DEV_CS5535)		+= cs5535.o
-obj-$(CONFIG_BLK_DEV_SC1200)		+= sc1200.o
-obj-$(CONFIG_BLK_DEV_CY82C693)		+= cy82c693.o
-obj-$(CONFIG_BLK_DEV_DELKIN)		+= delkin_cb.o
-obj-$(CONFIG_BLK_DEV_HPT366)		+= hpt366.o
-obj-$(CONFIG_BLK_DEV_IT8213)		+= it8213.o
-obj-$(CONFIG_BLK_DEV_IT821X)		+= it821x.o
-obj-$(CONFIG_BLK_DEV_JMICRON)		+= jmicron.o
-obj-$(CONFIG_BLK_DEV_NS87415)		+= ns87415.o
-obj-$(CONFIG_BLK_DEV_OPTI621)		+= opti621.o
-obj-$(CONFIG_BLK_DEV_PDC202XX_OLD)	+= pdc202xx_old.o
-obj-$(CONFIG_BLK_DEV_PDC202XX_NEW)	+= pdc202xx_new.o
-obj-$(CONFIG_BLK_DEV_PIIX)		+= piix.o
-obj-$(CONFIG_BLK_DEV_RZ1000)		+= rz1000.o
-obj-$(CONFIG_BLK_DEV_SVWKS)		+= serverworks.o
-obj-$(CONFIG_BLK_DEV_SGIIOC4)		+= sgiioc4.o
-obj-$(CONFIG_BLK_DEV_SIIMAGE)		+= siimage.o
-obj-$(CONFIG_BLK_DEV_SIS5513)		+= sis5513.o
-obj-$(CONFIG_BLK_DEV_SL82C105)		+= sl82c105.o
-obj-$(CONFIG_BLK_DEV_SLC90E66)		+= slc90e66.o
-obj-$(CONFIG_BLK_DEV_TC86C001)		+= tc86c001.o
-obj-$(CONFIG_BLK_DEV_TRIFLEX)		+= triflex.o
-obj-$(CONFIG_BLK_DEV_TRM290)		+= trm290.o
-obj-$(CONFIG_BLK_DEV_VIA82CXXX)		+= via82cxxx.o
-
-# Must appear at the end of the block
-obj-$(CONFIG_BLK_DEV_GENERIC)		+= ide-pci-generic.o
-ide-pci-generic-y			+= generic.o
-
-ifeq ($(CONFIG_BLK_DEV_CMD640), m)
-	obj-m += cmd640.o
-endif
-
-EXTRA_CFLAGS	:= -Idrivers/ide
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
deleted file mode 100644
index 49f163a..0000000
--- a/drivers/ide/pci/scc_pata.c
+++ /dev/null
@@ -1,966 +0,0 @@
-/*
- * Support for IDE interfaces on Celleb platform
- *
- * (C) Copyright 2006 TOSHIBA CORPORATION
- *
- * This code is based on drivers/ide/pci/siimage.c:
- * Copyright (C) 2001-2002	Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2003		Red Hat <alan@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA            0x01b4
-
-#define SCC_PATA_NAME           "scc IDE"
-
-#define TDVHSEL_MASTER          0x00000001
-#define TDVHSEL_SLAVE           0x00000004
-
-#define MODE_JCUSFEN            0x00000080
-
-#define CCKCTRL_ATARESET        0x00040000
-#define CCKCTRL_BUFCNT          0x00020000
-#define CCKCTRL_CRST            0x00010000
-#define CCKCTRL_OCLKEN          0x00000100
-#define CCKCTRL_ATACLKOEN       0x00000002
-#define CCKCTRL_LCLKEN          0x00000001
-
-#define QCHCD_IOS_SS		0x00000001
-
-#define QCHSD_STPDIAG		0x00020000
-
-#define INTMASK_MSK             0xD1000012
-#define INTSTS_SERROR		0x80000000
-#define INTSTS_PRERR		0x40000000
-#define INTSTS_RERR		0x10000000
-#define INTSTS_ICERR		0x01000000
-#define INTSTS_BMSINT		0x00000010
-#define INTSTS_BMHE		0x00000008
-#define INTSTS_IOIRQS           0x00000004
-#define INTSTS_INTRQ            0x00000002
-#define INTSTS_ACTEINT          0x00000001
-
-#define ECMODE_VALUE 0x01
-
-static struct scc_ports {
-	unsigned long ctl, dma;
-	struct ide_host *host;	/* for removing port from system */
-} scc_ports[MAX_HWIFS];
-
-/* PIO transfer mode  table */
-/* JCHST */
-static unsigned long JCHSTtbl[2][7] = {
-	{0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00},   /* 100MHz */
-	{0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00}    /* 133MHz */
-};
-
-/* JCHHT */
-static unsigned long JCHHTtbl[2][7] = {
-	{0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00},   /* 100MHz */
-	{0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00}    /* 133MHz */
-};
-
-/* JCHCT */
-static unsigned long JCHCTtbl[2][7] = {
-	{0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00},   /* 100MHz */
-	{0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00}    /* 133MHz */
-};
-
-
-/* DMA transfer mode  table */
-/* JCHDCTM/JCHDCTS */
-static unsigned long JCHDCTxtbl[2][7] = {
-	{0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00},   /* 100MHz */
-	{0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00}    /* 133MHz */
-};
-
-/* JCSTWTM/JCSTWTS  */
-static unsigned long JCSTWTxtbl[2][7] = {
-	{0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00},   /* 100MHz */
-	{0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02}    /* 133MHz */
-};
-
-/* JCTSS */
-static unsigned long JCTSStbl[2][7] = {
-	{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00},   /* 100MHz */
-	{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05}    /* 133MHz */
-};
-
-/* JCENVT */
-static unsigned long JCENVTtbl[2][7] = {
-	{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00},   /* 100MHz */
-	{0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02}    /* 133MHz */
-};
-
-/* JCACTSELS/JCACTSELM */
-static unsigned long JCACTSELtbl[2][7] = {
-	{0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00},   /* 100MHz */
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01}    /* 133MHz */
-};
-
-
-static u8 scc_ide_inb(unsigned long port)
-{
-	u32 data = in_be32((void*)port);
-	return (u8)data;
-}
-
-static void scc_exec_command(ide_hwif_t *hwif, u8 cmd)
-{
-	out_be32((void *)hwif->io_ports.command_addr, cmd);
-	eieio();
-	in_be32((void *)(hwif->dma_base + 0x01c));
-	eieio();
-}
-
-static u8 scc_read_status(ide_hwif_t *hwif)
-{
-	return (u8)in_be32((void *)hwif->io_ports.status_addr);
-}
-
-static u8 scc_read_altstatus(ide_hwif_t *hwif)
-{
-	return (u8)in_be32((void *)hwif->io_ports.ctl_addr);
-}
-
-static u8 scc_read_sff_dma_status(ide_hwif_t *hwif)
-{
-	return (u8)in_be32((void *)(hwif->dma_base + 4));
-}
-
-static void scc_set_irq(ide_hwif_t *hwif, int on)
-{
-	u8 ctl = ATA_DEVCTL_OBS;
-
-	if (on == 4) { /* hack for SRST */
-		ctl |= 4;
-		on &= ~4;
-	}
-
-	ctl |= on ? 0 : 2;
-
-	out_be32((void *)hwif->io_ports.ctl_addr, ctl);
-	eieio();
-	in_be32((void *)(hwif->dma_base + 0x01c));
-	eieio();
-}
-
-static void scc_ide_insw(unsigned long port, void *addr, u32 count)
-{
-	u16 *ptr = (u16 *)addr;
-	while (count--) {
-		*ptr++ = le16_to_cpu(in_be32((void*)port));
-	}
-}
-
-static void scc_ide_insl(unsigned long port, void *addr, u32 count)
-{
-	u16 *ptr = (u16 *)addr;
-	while (count--) {
-		*ptr++ = le16_to_cpu(in_be32((void*)port));
-		*ptr++ = le16_to_cpu(in_be32((void*)port));
-	}
-}
-
-static void scc_ide_outb(u8 addr, unsigned long port)
-{
-	out_be32((void*)port, addr);
-}
-
-static void
-scc_ide_outsw(unsigned long port, void *addr, u32 count)
-{
-	u16 *ptr = (u16 *)addr;
-	while (count--) {
-		out_be32((void*)port, cpu_to_le16(*ptr++));
-	}
-}
-
-static void
-scc_ide_outsl(unsigned long port, void *addr, u32 count)
-{
-	u16 *ptr = (u16 *)addr;
-	while (count--) {
-		out_be32((void*)port, cpu_to_le16(*ptr++));
-		out_be32((void*)port, cpu_to_le16(*ptr++));
-	}
-}
-
-/**
- *	scc_set_pio_mode	-	set host controller for PIO mode
- *	@drive: drive
- *	@pio: PIO mode number
- *
- *	Load the timing settings for this device mode into the
- *	controller.
- */
-
-static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-	struct scc_ports *ports = ide_get_hwifdata(hwif);
-	unsigned long ctl_base = ports->ctl;
-	unsigned long cckctrl_port = ctl_base + 0xff0;
-	unsigned long piosht_port = ctl_base + 0x000;
-	unsigned long pioct_port = ctl_base + 0x004;
-	unsigned long reg;
-	int offset;
-
-	reg = in_be32((void __iomem *)cckctrl_port);
-	if (reg & CCKCTRL_ATACLKOEN) {
-		offset = 1; /* 133MHz */
-	} else {
-		offset = 0; /* 100MHz */
-	}
-	reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
-	out_be32((void __iomem *)piosht_port, reg);
-	reg = JCHCTtbl[offset][pio];
-	out_be32((void __iomem *)pioct_port, reg);
-}
-
-/**
- *	scc_set_dma_mode	-	set host controller for DMA mode
- *	@drive: drive
- *	@speed: DMA mode
- *
- *	Load the timing settings for this device mode into the
- *	controller.
- */
-
-static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-	struct scc_ports *ports = ide_get_hwifdata(hwif);
-	unsigned long ctl_base = ports->ctl;
-	unsigned long cckctrl_port = ctl_base + 0xff0;
-	unsigned long mdmact_port = ctl_base + 0x008;
-	unsigned long mcrcst_port = ctl_base + 0x00c;
-	unsigned long sdmact_port = ctl_base + 0x010;
-	unsigned long scrcst_port = ctl_base + 0x014;
-	unsigned long udenvt_port = ctl_base + 0x018;
-	unsigned long tdvhsel_port   = ctl_base + 0x020;
-	int is_slave = (&hwif->drives[1] == drive);
-	int offset, idx;
-	unsigned long reg;
-	unsigned long jcactsel;
-
-	reg = in_be32((void __iomem *)cckctrl_port);
-	if (reg & CCKCTRL_ATACLKOEN) {
-		offset = 1; /* 133MHz */
-	} else {
-		offset = 0; /* 100MHz */
-	}
-
-	idx = speed - XFER_UDMA_0;
-
-	jcactsel = JCACTSELtbl[offset][idx];
-	if (is_slave) {
-		out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]);
-		out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]);
-		jcactsel = jcactsel << 2;
-		out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel);
-	} else {
-		out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]);
-		out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]);
-		out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel);
-	}
-	reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
-	out_be32((void __iomem *)udenvt_port, reg);
-}
-
-static void scc_dma_host_set(ide_drive_t *drive, int on)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	u8 unit = drive->dn & 1;
-	u8 dma_stat = scc_ide_inb(hwif->dma_base + 4);
-
-	if (on)
-		dma_stat |= (1 << (5 + unit));
-	else
-		dma_stat &= ~(1 << (5 + unit));
-
-	scc_ide_outb(dma_stat, hwif->dma_base + 4);
-}
-
-/**
- *	scc_ide_dma_setup	-	begin a DMA phase
- *	@drive: target device
- *
- *	Build an IDE DMA PRD (IDE speak for scatter gather table)
- *	and then set up the DMA transfer registers.
- *
- *	Returns 0 on success. If a PIO fallback is required then 1
- *	is returned.
- */
-
-static int scc_dma_setup(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	struct request *rq = HWGROUP(drive)->rq;
-	unsigned int reading;
-	u8 dma_stat;
-
-	if (rq_data_dir(rq))
-		reading = 0;
-	else
-		reading = 1 << 3;
-
-	/* fall back to pio! */
-	if (!ide_build_dmatable(drive, rq)) {
-		ide_map_sg(drive, rq);
-		return 1;
-	}
-
-	/* PRD table */
-	out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma);
-
-	/* specify r/w */
-	out_be32((void __iomem *)hwif->dma_base, reading);
-
-	/* read DMA status for INTR & ERROR flags */
-	dma_stat = in_be32((void __iomem *)(hwif->dma_base + 4));
-
-	/* clear INTR & ERROR flags */
-	out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6);
-	drive->waiting_for_dma = 1;
-	return 0;
-}
-
-static void scc_dma_start(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	u8 dma_cmd = scc_ide_inb(hwif->dma_base);
-
-	/* start DMA */
-	scc_ide_outb(dma_cmd | 1, hwif->dma_base);
-	wmb();
-}
-
-static int __scc_dma_end(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	u8 dma_stat, dma_cmd;
-
-	drive->waiting_for_dma = 0;
-	/* get DMA command mode */
-	dma_cmd = scc_ide_inb(hwif->dma_base);
-	/* stop DMA */
-	scc_ide_outb(dma_cmd & ~1, hwif->dma_base);
-	/* get DMA status */
-	dma_stat = scc_ide_inb(hwif->dma_base + 4);
-	/* clear the INTR & ERROR bits */
-	scc_ide_outb(dma_stat | 6, hwif->dma_base + 4);
-	/* purge DMA mappings */
-	ide_destroy_dmatable(drive);
-	/* verify good DMA status */
-	wmb();
-	return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
-}
-
-/**
- *	scc_dma_end	-	Stop DMA
- *	@drive: IDE drive
- *
- *	Check and clear INT Status register.
- *	Then call __scc_dma_end().
- */
-
-static int scc_dma_end(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-	void __iomem *dma_base = (void __iomem *)hwif->dma_base;
-	unsigned long intsts_port = hwif->dma_base + 0x014;
-	u32 reg;
-	int dma_stat, data_loss = 0;
-	static int retry = 0;
-
-	/* errata A308 workaround: Step5 (check data loss) */
-	/* We don't check non ide_disk because it is limited to UDMA4 */
-	if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr)
-	      & ATA_ERR) &&
-	    drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) {
-		reg = in_be32((void __iomem *)intsts_port);
-		if (!(reg & INTSTS_ACTEINT)) {
-			printk(KERN_WARNING "%s: operation failed (transfer data loss)\n",
-			       drive->name);
-			data_loss = 1;
-			if (retry++) {
-				struct request *rq = HWGROUP(drive)->rq;
-				int unit;
-				/* ERROR_RESET and drive->crc_count are needed
-				 * to reduce DMA transfer mode in retry process.
-				 */
-				if (rq)
-					rq->errors |= ERROR_RESET;
-				for (unit = 0; unit < MAX_DRIVES; unit++) {
-					ide_drive_t *drive = &hwif->drives[unit];
-					drive->crc_count++;
-				}
-			}
-		}
-	}
-
-	while (1) {
-		reg = in_be32((void __iomem *)intsts_port);
-
-		if (reg & INTSTS_SERROR) {
-			printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
-			out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
-
-			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
-			continue;
-		}
-
-		if (reg & INTSTS_PRERR) {
-			u32 maea0, maec0;
-			unsigned long ctl_base = hwif->config_data;
-
-			maea0 = in_be32((void __iomem *)(ctl_base + 0xF50));
-			maec0 = in_be32((void __iomem *)(ctl_base + 0xF54));
-
-			printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
-
-			out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
-
-			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
-			continue;
-		}
-
-		if (reg & INTSTS_RERR) {
-			printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
-			out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
-
-			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
-			continue;
-		}
-
-		if (reg & INTSTS_ICERR) {
-			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
-
-			printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
-			out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
-			continue;
-		}
-
-		if (reg & INTSTS_BMSINT) {
-			printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
-			out_be32((void __iomem *)intsts_port, INTSTS_BMSINT);
-
-			ide_do_reset(drive);
-			continue;
-		}
-
-		if (reg & INTSTS_BMHE) {
-			out_be32((void __iomem *)intsts_port, INTSTS_BMHE);
-			continue;
-		}
-
-		if (reg & INTSTS_ACTEINT) {
-			out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT);
-			continue;
-		}
-
-		if (reg & INTSTS_IOIRQS) {
-			out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS);
-			continue;
-		}
-		break;
-	}
-
-	dma_stat = __scc_dma_end(drive);
-	if (data_loss)
-		dma_stat |= 2; /* emulate DMA error (to retry command) */
-	return dma_stat;
-}
-
-/* returns 1 if dma irq issued, 0 otherwise */
-static int scc_dma_test_irq(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-	u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014);
-
-	/* SCC errata A252,A308 workaround: Step4 */
-	if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr)
-	     & ATA_ERR) &&
-	    (int_stat & INTSTS_INTRQ))
-		return 1;
-
-	/* SCC errata A308 workaround: Step5 (polling IOIRQS) */
-	if (int_stat & INTSTS_IOIRQS)
-		return 1;
-
-	return 0;
-}
-
-static u8 scc_udma_filter(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	u8 mask = hwif->ultra_mask;
-
-	/* errata A308 workaround: limit non ide_disk drive to UDMA4 */
-	if ((drive->media != ide_disk) && (mask & 0xE0)) {
-		printk(KERN_INFO "%s: limit %s to UDMA4\n",
-		       SCC_PATA_NAME, drive->name);
-		mask = ATA_UDMA4;
-	}
-
-	return mask;
-}
-
-/**
- *	setup_mmio_scc	-	map CTRL/BMID region
- *	@dev: PCI device we are configuring
- *	@name: device name
- *
- */
-
-static int setup_mmio_scc (struct pci_dev *dev, const char *name)
-{
-	unsigned long ctl_base = pci_resource_start(dev, 0);
-	unsigned long dma_base = pci_resource_start(dev, 1);
-	unsigned long ctl_size = pci_resource_len(dev, 0);
-	unsigned long dma_size = pci_resource_len(dev, 1);
-	void __iomem *ctl_addr;
-	void __iomem *dma_addr;
-	int i, ret;
-
-	for (i = 0; i < MAX_HWIFS; i++) {
-		if (scc_ports[i].ctl == 0)
-			break;
-	}
-	if (i >= MAX_HWIFS)
-		return -ENOMEM;
-
-	ret = pci_request_selected_regions(dev, (1 << 2) - 1, name);
-	if (ret < 0) {
-		printk(KERN_ERR "%s: can't reserve resources\n", name);
-		return ret;
-	}
-
-	if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL)
-		goto fail_0;
-
-	if ((dma_addr = ioremap(dma_base, dma_size)) == NULL)
-		goto fail_1;
-
-	pci_set_master(dev);
-	scc_ports[i].ctl = (unsigned long)ctl_addr;
-	scc_ports[i].dma = (unsigned long)dma_addr;
-	pci_set_drvdata(dev, (void *) &scc_ports[i]);
-
-	return 1;
-
- fail_1:
-	iounmap(ctl_addr);
- fail_0:
-	return -ENOMEM;
-}
-
-static int scc_ide_setup_pci_device(struct pci_dev *dev,
-				    const struct ide_port_info *d)
-{
-	struct scc_ports *ports = pci_get_drvdata(dev);
-	struct ide_host *host;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	int i, rc;
-
-	memset(&hw, 0, sizeof(hw));
-	for (i = 0; i <= 8; i++)
-		hw.io_ports_array[i] = ports->dma + 0x20 + i * 4;
-	hw.irq = dev->irq;
-	hw.dev = &dev->dev;
-	hw.chipset = ide_pci;
-
-	rc = ide_host_add(d, hws, &host);
-	if (rc)
-		return rc;
-
-	ports->host = host;
-
-	return 0;
-}
-
-/**
- *	init_setup_scc	-	set up an SCC PATA Controller
- *	@dev: PCI device
- *	@d: IDE port info
- *
- *	Perform the initial set up for this device.
- */
-
-static int __devinit init_setup_scc(struct pci_dev *dev,
-				    const struct ide_port_info *d)
-{
-	unsigned long ctl_base;
-	unsigned long dma_base;
-	unsigned long cckctrl_port;
-	unsigned long intmask_port;
-	unsigned long mode_port;
-	unsigned long ecmode_port;
-	u32 reg = 0;
-	struct scc_ports *ports;
-	int rc;
-
-	rc = pci_enable_device(dev);
-	if (rc)
-		goto end;
-
-	rc = setup_mmio_scc(dev, d->name);
-	if (rc < 0)
-		goto end;
-
-	ports = pci_get_drvdata(dev);
-	ctl_base = ports->ctl;
-	dma_base = ports->dma;
-	cckctrl_port = ctl_base + 0xff0;
-	intmask_port = dma_base + 0x010;
-	mode_port = ctl_base + 0x024;
-	ecmode_port = ctl_base + 0xf00;
-
-	/* controller initialization */
-	reg = 0;
-	out_be32((void*)cckctrl_port, reg);
-	reg |= CCKCTRL_ATACLKOEN;
-	out_be32((void*)cckctrl_port, reg);
-	reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
-	out_be32((void*)cckctrl_port, reg);
-	reg |= CCKCTRL_CRST;
-	out_be32((void*)cckctrl_port, reg);
-
-	for (;;) {
-		reg = in_be32((void*)cckctrl_port);
-		if (reg & CCKCTRL_CRST)
-			break;
-		udelay(5000);
-	}
-
-	reg |= CCKCTRL_ATARESET;
-	out_be32((void*)cckctrl_port, reg);
-
-	out_be32((void*)ecmode_port, ECMODE_VALUE);
-	out_be32((void*)mode_port, MODE_JCUSFEN);
-	out_be32((void*)intmask_port, INTMASK_MSK);
-
-	rc = scc_ide_setup_pci_device(dev, d);
-
- end:
-	return rc;
-}
-
-static void scc_tf_load(ide_drive_t *drive, ide_task_t *task)
-{
-	struct ide_io_ports *io_ports = &drive->hwif->io_ports;
-	struct ide_taskfile *tf = &task->tf;
-	u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
-
-	if (task->tf_flags & IDE_TFLAG_FLAGGED)
-		HIHI = 0xFF;
-
-	if (task->tf_flags & IDE_TFLAG_OUT_DATA)
-		out_be32((void *)io_ports->data_addr,
-			 (tf->hob_data << 8) | tf->data);
-
-	if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
-		scc_ide_outb(tf->hob_feature, io_ports->feature_addr);
-	if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
-		scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr);
-	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
-		scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr);
-	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
-		scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr);
-	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
-		scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr);
-
-	if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
-		scc_ide_outb(tf->feature, io_ports->feature_addr);
-	if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
-		scc_ide_outb(tf->nsect, io_ports->nsect_addr);
-	if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
-		scc_ide_outb(tf->lbal, io_ports->lbal_addr);
-	if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
-		scc_ide_outb(tf->lbam, io_ports->lbam_addr);
-	if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
-		scc_ide_outb(tf->lbah, io_ports->lbah_addr);
-
-	if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
-		scc_ide_outb((tf->device & HIHI) | drive->select,
-			     io_ports->device_addr);
-}
-
-static void scc_tf_read(ide_drive_t *drive, ide_task_t *task)
-{
-	struct ide_io_ports *io_ports = &drive->hwif->io_ports;
-	struct ide_taskfile *tf = &task->tf;
-
-	if (task->tf_flags & IDE_TFLAG_IN_DATA) {
-		u16 data = (u16)in_be32((void *)io_ports->data_addr);
-
-		tf->data = data & 0xff;
-		tf->hob_data = (data >> 8) & 0xff;
-	}
-
-	/* be sure we're looking at the low order bits */
-	scc_ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
-
-	if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
-		tf->feature = scc_ide_inb(io_ports->feature_addr);
-	if (task->tf_flags & IDE_TFLAG_IN_NSECT)
-		tf->nsect  = scc_ide_inb(io_ports->nsect_addr);
-	if (task->tf_flags & IDE_TFLAG_IN_LBAL)
-		tf->lbal   = scc_ide_inb(io_ports->lbal_addr);
-	if (task->tf_flags & IDE_TFLAG_IN_LBAM)
-		tf->lbam   = scc_ide_inb(io_ports->lbam_addr);
-	if (task->tf_flags & IDE_TFLAG_IN_LBAH)
-		tf->lbah   = scc_ide_inb(io_ports->lbah_addr);
-	if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
-		tf->device = scc_ide_inb(io_ports->device_addr);
-
-	if (task->tf_flags & IDE_TFLAG_LBA48) {
-		scc_ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
-
-		if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
-			tf->hob_feature = scc_ide_inb(io_ports->feature_addr);
-		if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
-			tf->hob_nsect   = scc_ide_inb(io_ports->nsect_addr);
-		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
-			tf->hob_lbal    = scc_ide_inb(io_ports->lbal_addr);
-		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
-			tf->hob_lbam    = scc_ide_inb(io_ports->lbam_addr);
-		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
-			tf->hob_lbah    = scc_ide_inb(io_ports->lbah_addr);
-	}
-}
-
-static void scc_input_data(ide_drive_t *drive, struct request *rq,
-			   void *buf, unsigned int len)
-{
-	unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
-	len++;
-
-	if (drive->io_32bit) {
-		scc_ide_insl(data_addr, buf, len / 4);
-
-		if ((len & 3) >= 2)
-			scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1);
-	} else
-		scc_ide_insw(data_addr, buf, len / 2);
-}
-
-static void scc_output_data(ide_drive_t *drive,  struct request *rq,
-			    void *buf, unsigned int len)
-{
-	unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
-	len++;
-
-	if (drive->io_32bit) {
-		scc_ide_outsl(data_addr, buf, len / 4);
-
-		if ((len & 3) >= 2)
-			scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1);
-	} else
-		scc_ide_outsw(data_addr, buf, len / 2);
-}
-
-/**
- *	init_mmio_iops_scc	-	set up the iops for MMIO
- *	@hwif: interface to set up
- *
- */
-
-static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	struct scc_ports *ports = pci_get_drvdata(dev);
-	unsigned long dma_base = ports->dma;
-
-	ide_set_hwifdata(hwif, ports);
-
-	hwif->dma_base = dma_base;
-	hwif->config_data = ports->ctl;
-}
-
-/**
- *	init_iops_scc	-	set up iops
- *	@hwif: interface to set up
- *
- *	Do the basic setup for the SCC hardware interface
- *	and then do the MMIO setup.
- */
-
-static void __devinit init_iops_scc(ide_hwif_t *hwif)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-
-	hwif->hwif_data = NULL;
-	if (pci_get_drvdata(dev) == NULL)
-		return;
-	init_mmio_iops_scc(hwif);
-}
-
-static int __devinit scc_init_dma(ide_hwif_t *hwif,
-				  const struct ide_port_info *d)
-{
-	return ide_allocate_dma_engine(hwif);
-}
-
-static u8 scc_cable_detect(ide_hwif_t *hwif)
-{
-	return ATA_CBL_PATA80;
-}
-
-/**
- *	init_hwif_scc	-	set up hwif
- *	@hwif: interface to set up
- *
- *	We do the basic set up of the interface structure. The SCC
- *	requires several custom handlers so we override the default
- *	ide DMA handlers appropriately.
- */
-
-static void __devinit init_hwif_scc(ide_hwif_t *hwif)
-{
-	/* PTERADD */
-	out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
-
-	if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN)
-		hwif->ultra_mask = ATA_UDMA6; /* 133MHz */
-	else
-		hwif->ultra_mask = ATA_UDMA5; /* 100MHz */
-}
-
-static const struct ide_tp_ops scc_tp_ops = {
-	.exec_command		= scc_exec_command,
-	.read_status		= scc_read_status,
-	.read_altstatus		= scc_read_altstatus,
-	.read_sff_dma_status	= scc_read_sff_dma_status,
-
-	.set_irq		= scc_set_irq,
-
-	.tf_load		= scc_tf_load,
-	.tf_read		= scc_tf_read,
-
-	.input_data		= scc_input_data,
-	.output_data		= scc_output_data,
-};
-
-static const struct ide_port_ops scc_port_ops = {
-	.set_pio_mode		= scc_set_pio_mode,
-	.set_dma_mode		= scc_set_dma_mode,
-	.udma_filter		= scc_udma_filter,
-	.cable_detect		= scc_cable_detect,
-};
-
-static const struct ide_dma_ops scc_dma_ops = {
-	.dma_host_set		= scc_dma_host_set,
-	.dma_setup		= scc_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
-	.dma_start		= scc_dma_start,
-	.dma_end		= scc_dma_end,
-	.dma_test_irq		= scc_dma_test_irq,
-	.dma_lost_irq		= ide_dma_lost_irq,
-	.dma_timeout		= ide_dma_timeout,
-};
-
-#define DECLARE_SCC_DEV(name_str)			\
-  {							\
-      .name		= name_str,			\
-      .init_iops	= init_iops_scc,		\
-      .init_dma		= scc_init_dma,			\
-      .init_hwif	= init_hwif_scc,		\
-      .tp_ops		= &scc_tp_ops,		\
-      .port_ops		= &scc_port_ops,		\
-      .dma_ops		= &scc_dma_ops,			\
-      .host_flags	= IDE_HFLAG_SINGLE,		\
-      .pio_mask		= ATA_PIO4,			\
-  }
-
-static const struct ide_port_info scc_chipsets[] __devinitdata = {
-	/* 0 */ DECLARE_SCC_DEV("sccIDE"),
-};
-
-/**
- *	scc_init_one	-	pci layer discovery entry
- *	@dev: PCI device
- *	@id: ident table entry
- *
- *	Called by the PCI code when it finds an SCC PATA controller.
- *	We then use the IDE PCI generic helper to do most of the work.
- */
-
-static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	return init_setup_scc(dev, &scc_chipsets[id->driver_data]);
-}
-
-/**
- *	scc_remove	-	pci layer remove entry
- *	@dev: PCI device
- *
- *	Called by the PCI code when it removes an SCC PATA controller.
- */
-
-static void __devexit scc_remove(struct pci_dev *dev)
-{
-	struct scc_ports *ports = pci_get_drvdata(dev);
-	struct ide_host *host = ports->host;
-
-	ide_host_remove(host);
-
-	iounmap((void*)ports->dma);
-	iounmap((void*)ports->ctl);
-	pci_release_selected_regions(dev, (1 << 2) - 1);
-	memset(ports, 0, sizeof(*ports));
-}
-
-static const struct pci_device_id scc_pci_tbl[] = {
-	{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 },
-	{ 0, },
-};
-MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
-
-static struct pci_driver scc_pci_driver = {
-	.name = "SCC IDE",
-	.id_table = scc_pci_tbl,
-	.probe = scc_init_one,
-	.remove = __devexit_p(scc_remove),
-};
-
-static int scc_ide_init(void)
-{
-	return ide_pci_register_driver(&scc_pci_driver);
-}
-
-module_init(scc_ide_init);
-/* -- No exit code?
-static void scc_ide_exit(void)
-{
-	ide_pci_unregister_driver(&scc_pci_driver);
-}
-module_exit(scc_ide_exit);
- */
-
-
-MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
deleted file mode 100644
index 8af9b23..0000000
--- a/drivers/ide/pci/sgiioc4.c
+++ /dev/null
@@ -1,674 +0,0 @@
-/*
- * Copyright (c) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
- * Copyright (C) 2008 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * For further information regarding this notice, see:
- *
- * http://oss.sgi.com/projects/GenInfo/NoticeExplan
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/scatterlist.h>
-#include <linux/ioc4.h>
-#include <asm/io.h>
-
-#include <linux/ide.h>
-
-#define DRV_NAME "SGIIOC4"
-
-/* IOC4 Specific Definitions */
-#define IOC4_CMD_OFFSET		0x100
-#define IOC4_CTRL_OFFSET	0x120
-#define IOC4_DMA_OFFSET		0x140
-#define IOC4_INTR_OFFSET	0x0
-
-#define IOC4_TIMING		0x00
-#define IOC4_DMA_PTR_L		0x01
-#define IOC4_DMA_PTR_H		0x02
-#define IOC4_DMA_ADDR_L		0x03
-#define IOC4_DMA_ADDR_H		0x04
-#define IOC4_BC_DEV		0x05
-#define IOC4_BC_MEM		0x06
-#define	IOC4_DMA_CTRL		0x07
-#define	IOC4_DMA_END_ADDR	0x08
-
-/* Bits in the IOC4 Control/Status Register */
-#define	IOC4_S_DMA_START	0x01
-#define	IOC4_S_DMA_STOP		0x02
-#define	IOC4_S_DMA_DIR		0x04
-#define	IOC4_S_DMA_ACTIVE	0x08
-#define	IOC4_S_DMA_ERROR	0x10
-#define	IOC4_ATA_MEMERR		0x02
-
-/* Read/Write Directions */
-#define	IOC4_DMA_WRITE		0x04
-#define	IOC4_DMA_READ		0x00
-
-/* Interrupt Register Offsets */
-#define IOC4_INTR_REG		0x03
-#define	IOC4_INTR_SET		0x05
-#define	IOC4_INTR_CLEAR		0x07
-
-#define IOC4_IDE_CACHELINE_SIZE	128
-#define IOC4_CMD_CTL_BLK_SIZE	0x20
-#define IOC4_SUPPORTED_FIRMWARE_REV 46
-
-typedef struct {
-	u32 timing_reg0;
-	u32 timing_reg1;
-	u32 low_mem_ptr;
-	u32 high_mem_ptr;
-	u32 low_mem_addr;
-	u32 high_mem_addr;
-	u32 dev_byte_count;
-	u32 mem_byte_count;
-	u32 status;
-} ioc4_dma_regs_t;
-
-/* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */
-/* IOC4 has only 1 IDE channel */
-#define IOC4_PRD_BYTES       16
-#define IOC4_PRD_ENTRIES     (PAGE_SIZE /(4*IOC4_PRD_BYTES))
-
-
-static void
-sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
-			unsigned long ctrl_port, unsigned long irq_port)
-{
-	unsigned long reg = data_port;
-	int i;
-
-	/* Registers are word (32 bit) aligned */
-	for (i = 0; i <= 7; i++)
-		hw->io_ports_array[i] = reg + i * 4;
-
-	hw->io_ports.ctl_addr = ctrl_port;
-	hw->io_ports.irq_addr = irq_port;
-}
-
-static int
-sgiioc4_checkirq(ide_hwif_t * hwif)
-{
-	unsigned long intr_addr =
-		hwif->io_ports.irq_addr + IOC4_INTR_REG * 4;
-
-	if ((u8)readl((void __iomem *)intr_addr) & 0x03)
-		return 1;
-
-	return 0;
-}
-
-static u8 sgiioc4_read_status(ide_hwif_t *);
-
-static int
-sgiioc4_clearirq(ide_drive_t * drive)
-{
-	u32 intr_reg;
-	ide_hwif_t *hwif = HWIF(drive);
-	struct ide_io_ports *io_ports = &hwif->io_ports;
-	unsigned long other_ir = io_ports->irq_addr + (IOC4_INTR_REG << 2);
-
-	/* Code to check for PCI error conditions */
-	intr_reg = readl((void __iomem *)other_ir);
-	if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */
-		/*
-		 * Using sgiioc4_read_status to read the Status register has a
-		 * side effect of clearing the interrupt.  The first read should
-		 * clear it if it is set.  The second read should return
-		 * a "clear" status if it got cleared.  If not, then spin
-		 * for a bit trying to clear it.
-		 */
-		u8 stat = sgiioc4_read_status(hwif);
-		int count = 0;
-
-		stat = sgiioc4_read_status(hwif);
-		while ((stat & ATA_BUSY) && (count++ < 100)) {
-			udelay(1);
-			stat = sgiioc4_read_status(hwif);
-		}
-
-		if (intr_reg & 0x02) {
-			struct pci_dev *dev = to_pci_dev(hwif->dev);
-			/* Error when transferring DMA data on PCI bus */
-			u32 pci_err_addr_low, pci_err_addr_high,
-			    pci_stat_cmd_reg;
-
-			pci_err_addr_low =
-				readl((void __iomem *)io_ports->irq_addr);
-			pci_err_addr_high =
-				readl((void __iomem *)(io_ports->irq_addr + 4));
-			pci_read_config_dword(dev, PCI_COMMAND,
-					      &pci_stat_cmd_reg);
-			printk(KERN_ERR
-			       "%s(%s) : PCI Bus Error when doing DMA:"
-				   " status-cmd reg is 0x%x\n",
-			       __func__, drive->name, pci_stat_cmd_reg);
-			printk(KERN_ERR
-			       "%s(%s) : PCI Error Address is 0x%x%x\n",
-			       __func__, drive->name,
-			       pci_err_addr_high, pci_err_addr_low);
-			/* Clear the PCI Error indicator */
-			pci_write_config_dword(dev, PCI_COMMAND, 0x00000146);
-		}
-
-		/* Clear the Interrupt, Error bits on the IOC4 */
-		writel(0x03, (void __iomem *)other_ir);
-
-		intr_reg = readl((void __iomem *)other_ir);
-	}
-
-	return intr_reg & 3;
-}
-
-static void sgiioc4_dma_start(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-	unsigned long ioc4_dma_addr = hwif->dma_base + IOC4_DMA_CTRL * 4;
-	unsigned int reg = readl((void __iomem *)ioc4_dma_addr);
-	unsigned int temp_reg = reg | IOC4_S_DMA_START;
-
-	writel(temp_reg, (void __iomem *)ioc4_dma_addr);
-}
-
-static u32
-sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
-{
-	unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
-	u32	ioc4_dma;
-	int	count;
-
-	count = 0;
-	ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
-	while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) {
-		udelay(1);
-		ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
-	}
-	return ioc4_dma;
-}
-
-/* Stops the IOC4 DMA Engine */
-static int sgiioc4_dma_end(ide_drive_t *drive)
-{
-	u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0;
-	ide_hwif_t *hwif = HWIF(drive);
-	unsigned long dma_base = hwif->dma_base;
-	int dma_stat = 0;
-	unsigned long *ending_dma = ide_get_hwifdata(hwif);
-
-	writel(IOC4_S_DMA_STOP, (void __iomem *)(dma_base + IOC4_DMA_CTRL * 4));
-
-	ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
-
-	if (ioc4_dma & IOC4_S_DMA_STOP) {
-		printk(KERN_ERR
-		       "%s(%s): IOC4 DMA STOP bit is still 1 :"
-		       "ioc4_dma_reg 0x%x\n",
-		       __func__, drive->name, ioc4_dma);
-		dma_stat = 1;
-	}
-
-	/*
-	 * The IOC4 will DMA 1's to the ending dma area to indicate that
-	 * previous data DMA is complete.  This is necessary because of relaxed
-	 * ordering between register reads and DMA writes on the Altix.
-	 */
-	while ((cnt++ < 200) && (!valid)) {
-		for (num = 0; num < 16; num++) {
-			if (ending_dma[num]) {
-				valid = 1;
-				break;
-			}
-		}
-		udelay(1);
-	}
-	if (!valid) {
-		printk(KERN_ERR "%s(%s) : DMA incomplete\n", __func__,
-		       drive->name);
-		dma_stat = 1;
-	}
-
-	bc_dev = readl((void __iomem *)(dma_base + IOC4_BC_DEV * 4));
-	bc_mem = readl((void __iomem *)(dma_base + IOC4_BC_MEM * 4));
-
-	if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) {
-		if (bc_dev > bc_mem + 8) {
-			printk(KERN_ERR
-			       "%s(%s): WARNING!! byte_count_dev %d "
-			       "!= byte_count_mem %d\n",
-			       __func__, drive->name, bc_dev, bc_mem);
-		}
-	}
-
-	drive->waiting_for_dma = 0;
-	ide_destroy_dmatable(drive);
-
-	return dma_stat;
-}
-
-static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
-}
-
-/* returns 1 if dma irq issued, 0 otherwise */
-static int sgiioc4_dma_test_irq(ide_drive_t *drive)
-{
-	return sgiioc4_checkirq(HWIF(drive));
-}
-
-static void sgiioc4_dma_host_set(ide_drive_t *drive, int on)
-{
-	if (!on)
-		sgiioc4_clearirq(drive);
-}
-
-static void
-sgiioc4_resetproc(ide_drive_t * drive)
-{
-	sgiioc4_dma_end(drive);
-	sgiioc4_clearirq(drive);
-}
-
-static void
-sgiioc4_dma_lost_irq(ide_drive_t * drive)
-{
-	sgiioc4_resetproc(drive);
-
-	ide_dma_lost_irq(drive);
-}
-
-static u8 sgiioc4_read_status(ide_hwif_t *hwif)
-{
-	unsigned long port = hwif->io_ports.status_addr;
-	u8 reg = (u8) readb((void __iomem *) port);
-
-	if (!(reg & ATA_BUSY)) {	/* Not busy... check for interrupt */
-		unsigned long other_ir = port - 0x110;
-		unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
-
-		/* Clear the Interrupt, Error bits on the IOC4 */
-		if (intr_reg & 0x03) {
-			writel(0x03, (void __iomem *) other_ir);
-			intr_reg = (u32) readl((void __iomem *) other_ir);
-		}
-	}
-
-	return reg;
-}
-
-/* Creates a dma map for the scatter-gather list entries */
-static int __devinit
-ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
-	int num_ports = sizeof (ioc4_dma_regs_t);
-	void *pad;
-
-	printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
-
-	if (request_mem_region(dma_base, num_ports, hwif->name) == NULL) {
-		printk(KERN_ERR "%s(%s) -- ERROR: addresses 0x%08lx to 0x%08lx "
-		       "already in use\n", __func__, hwif->name,
-		       dma_base, dma_base + num_ports - 1);
-		return -1;
-	}
-
-	hwif->dma_base = (unsigned long)hwif->io_ports.irq_addr +
-			 IOC4_DMA_OFFSET;
-
-	hwif->sg_max_nents = IOC4_PRD_ENTRIES;
-
-	hwif->prd_max_nents = IOC4_PRD_ENTRIES;
-	hwif->prd_ent_size = IOC4_PRD_BYTES;
-
-	if (ide_allocate_dma_engine(hwif))
-		goto dma_pci_alloc_failure;
-
-	pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
-				   (dma_addr_t *)&hwif->extra_base);
-	if (pad) {
-		ide_set_hwifdata(hwif, pad);
-		return 0;
-	}
-
-	ide_release_dma_engine(hwif);
-
-	printk(KERN_ERR "%s(%s) -- ERROR: Unable to allocate DMA maps\n",
-	       __func__, hwif->name);
-	printk(KERN_INFO "%s: changing from DMA to PIO mode", hwif->name);
-
-dma_pci_alloc_failure:
-	release_mem_region(dma_base, num_ports);
-
-	return -1;
-}
-
-/* Initializes the IOC4 DMA Engine */
-static void
-sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
-{
-	u32 ioc4_dma;
-	ide_hwif_t *hwif = HWIF(drive);
-	unsigned long dma_base = hwif->dma_base;
-	unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
-	u32 dma_addr, ending_dma_addr;
-
-	ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
-
-	if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
-		printk(KERN_WARNING
-			"%s(%s):Warning!! DMA from previous transfer was still active\n",
-		       __func__, drive->name);
-		writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
-		ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
-
-		if (ioc4_dma & IOC4_S_DMA_STOP)
-			printk(KERN_ERR
-			       "%s(%s) : IOC4 Dma STOP bit is still 1\n",
-			       __func__, drive->name);
-	}
-
-	ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
-	if (ioc4_dma & IOC4_S_DMA_ERROR) {
-		printk(KERN_WARNING
-		       "%s(%s) : Warning!! - DMA Error during Previous"
-		       " transfer | status 0x%x\n",
-		       __func__, drive->name, ioc4_dma);
-		writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
-		ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
-
-		if (ioc4_dma & IOC4_S_DMA_STOP)
-			printk(KERN_ERR
-			       "%s(%s) : IOC4 DMA STOP bit is still 1\n",
-			       __func__, drive->name);
-	}
-
-	/* Address of the Scatter Gather List */
-	dma_addr = cpu_to_le32(hwif->dmatable_dma);
-	writel(dma_addr, (void __iomem *)(dma_base + IOC4_DMA_PTR_L * 4));
-
-	/* Address of the Ending DMA */
-	memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
-	ending_dma_addr = cpu_to_le32(hwif->extra_base);
-	writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4));
-
-	writel(dma_direction, (void __iomem *)ioc4_dma_addr);
-	drive->waiting_for_dma = 1;
-}
-
-/* IOC4 Scatter Gather list Format 					 */
-/* 128 Bit entries to support 64 bit addresses in the future		 */
-/* The Scatter Gather list Entry should be in the BIG-ENDIAN Format	 */
-/* --------------------------------------------------------------------- */
-/* | Upper 32 bits - Zero           |	 	Lower 32 bits- address | */
-/* --------------------------------------------------------------------- */
-/* | Upper 32 bits - Zero	    |EOL| 15 unused     | 16 Bit Length| */
-/* --------------------------------------------------------------------- */
-/* Creates the scatter gather list, DMA Table */
-static unsigned int
-sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-	unsigned int *table = hwif->dmatable_cpu;
-	unsigned int count = 0, i = 1;
-	struct scatterlist *sg;
-
-	hwif->sg_nents = i = ide_build_sglist(drive, rq);
-
-	if (!i)
-		return 0;	/* sglist of length Zero */
-
-	sg = hwif->sg_table;
-	while (i && sg_dma_len(sg)) {
-		dma_addr_t cur_addr;
-		int cur_len;
-		cur_addr = sg_dma_address(sg);
-		cur_len = sg_dma_len(sg);
-
-		while (cur_len) {
-			if (count++ >= IOC4_PRD_ENTRIES) {
-				printk(KERN_WARNING
-				       "%s: DMA table too small\n",
-				       drive->name);
-				goto use_pio_instead;
-			} else {
-				u32 bcount =
-				    0x10000 - (cur_addr & 0xffff);
-
-				if (bcount > cur_len)
-					bcount = cur_len;
-
-				/* put the addr, length in
-				 * the IOC4 dma-table format */
-				*table = 0x0;
-				table++;
-				*table = cpu_to_be32(cur_addr);
-				table++;
-				*table = 0x0;
-				table++;
-
-				*table = cpu_to_be32(bcount);
-				table++;
-
-				cur_addr += bcount;
-				cur_len -= bcount;
-			}
-		}
-
-		sg = sg_next(sg);
-		i--;
-	}
-
-	if (count) {
-		table--;
-		*table |= cpu_to_be32(0x80000000);
-		return count;
-	}
-
-use_pio_instead:
-	ide_destroy_dmatable(drive);
-
-	return 0;		/* revert to PIO for this request */
-}
-
-static int sgiioc4_dma_setup(ide_drive_t *drive)
-{
-	struct request *rq = HWGROUP(drive)->rq;
-	unsigned int count = 0;
-	int ddir;
-
-	if (rq_data_dir(rq))
-		ddir = PCI_DMA_TODEVICE;
-	else
-		ddir = PCI_DMA_FROMDEVICE;
-
-	if (!(count = sgiioc4_build_dma_table(drive, rq, ddir))) {
-		/* try PIO instead of DMA */
-		ide_map_sg(drive, rq);
-		return 1;
-	}
-
-	if (rq_data_dir(rq))
-		/* Writes TO the IOC4 FROM Main Memory */
-		ddir = IOC4_DMA_READ;
-	else
-		/* Writes FROM the IOC4 TO Main Memory */
-		ddir = IOC4_DMA_WRITE;
-
-	sgiioc4_configure_for_dma(ddir, drive);
-
-	return 0;
-}
-
-static const struct ide_tp_ops sgiioc4_tp_ops = {
-	.exec_command		= ide_exec_command,
-	.read_status		= sgiioc4_read_status,
-	.read_altstatus		= ide_read_altstatus,
-	.read_sff_dma_status	= ide_read_sff_dma_status,
-
-	.set_irq		= ide_set_irq,
-
-	.tf_load		= ide_tf_load,
-	.tf_read		= ide_tf_read,
-
-	.input_data		= ide_input_data,
-	.output_data		= ide_output_data,
-};
-
-static const struct ide_port_ops sgiioc4_port_ops = {
-	.set_dma_mode		= sgiioc4_set_dma_mode,
-	/* reset DMA engine, clear IRQs */
-	.resetproc		= sgiioc4_resetproc,
-};
-
-static const struct ide_dma_ops sgiioc4_dma_ops = {
-	.dma_host_set		= sgiioc4_dma_host_set,
-	.dma_setup		= sgiioc4_dma_setup,
-	.dma_start		= sgiioc4_dma_start,
-	.dma_end		= sgiioc4_dma_end,
-	.dma_test_irq		= sgiioc4_dma_test_irq,
-	.dma_lost_irq		= sgiioc4_dma_lost_irq,
-	.dma_timeout		= ide_dma_timeout,
-};
-
-static const struct ide_port_info sgiioc4_port_info __devinitdata = {
-	.name			= DRV_NAME,
-	.chipset		= ide_pci,
-	.init_dma		= ide_dma_sgiioc4,
-	.tp_ops			= &sgiioc4_tp_ops,
-	.port_ops		= &sgiioc4_port_ops,
-	.dma_ops		= &sgiioc4_dma_ops,
-	.host_flags		= IDE_HFLAG_MMIO,
-	.mwdma_mask		= ATA_MWDMA2_ONLY,
-};
-
-static int __devinit
-sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
-{
-	unsigned long cmd_base, irqport;
-	unsigned long bar0, cmd_phys_base, ctl;
-	void __iomem *virt_base;
-	struct ide_host *host;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	struct ide_port_info d = sgiioc4_port_info;
-	int rc;
-
-	/*  Get the CmdBlk and CtrlBlk Base Registers */
-	bar0 = pci_resource_start(dev, 0);
-	virt_base = ioremap(bar0, pci_resource_len(dev, 0));
-	if (virt_base == NULL) {
-		printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
-				DRV_NAME, bar0);
-		return -ENOMEM;
-	}
-	cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET;
-	ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET;
-	irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
-
-	cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
-	if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
-			       DRV_NAME) == NULL) {
-		printk(KERN_ERR "%s %s -- ERROR: addresses 0x%08lx to 0x%08lx "
-		       "already in use\n", DRV_NAME, pci_name(dev),
-		       cmd_phys_base, cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
-		return -EBUSY;
-	}
-
-	/* Initialize the IO registers */
-	memset(&hw, 0, sizeof(hw));
-	sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport);
-	hw.irq = dev->irq;
-	hw.chipset = ide_pci;
-	hw.dev = &dev->dev;
-
-	/* Initializing chipset IRQ Registers */
-	writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
-
-	host = ide_host_alloc(&d, hws);
-	if (host == NULL) {
-		rc = -ENOMEM;
-		goto err;
-	}
-
-	rc = ide_host_register(host, &d, hws);
-	if (rc)
-		goto err_free;
-
-	return 0;
-err_free:
-	ide_host_free(host);
-err:
-	release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE);
-	iounmap(virt_base);
-	return rc;
-}
-
-static unsigned int __devinit
-pci_init_sgiioc4(struct pci_dev *dev)
-{
-	int ret;
-
-	printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n",
-			 DRV_NAME, pci_name(dev), dev->revision);
-
-	if (dev->revision < IOC4_SUPPORTED_FIRMWARE_REV) {
-		printk(KERN_ERR "Skipping %s IDE controller in slot %s: "
-				"firmware is obsolete - please upgrade to "
-				"revision46 or higher\n",
-				DRV_NAME, pci_name(dev));
-		ret = -EAGAIN;
-		goto out;
-	}
-	ret = sgiioc4_ide_setup_pci_device(dev);
-out:
-	return ret;
-}
-
-int
-ioc4_ide_attach_one(struct ioc4_driver_data *idd)
-{
-	/* PCI-RT does not bring out IDE connection.
-	 * Do not attach to this particular IOC4.
-	 */
-	if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
-		return 0;
-
-	return pci_init_sgiioc4(idd->idd_pdev);
-}
-
-static struct ioc4_submodule ioc4_ide_submodule = {
-	.is_name = "IOC4_ide",
-	.is_owner = THIS_MODULE,
-	.is_probe = ioc4_ide_attach_one,
-/*	.is_remove = ioc4_ide_remove_one,	*/
-};
-
-static int __init ioc4_ide_init(void)
-{
-	return ioc4_register_submodule(&ioc4_ide_submodule);
-}
-
-late_initcall(ioc4_ide_init); /* Call only after IDE init is done */
-
-MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
-MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
deleted file mode 100644
index eb4faf9..0000000
--- a/drivers/ide/pci/siimage.c
+++ /dev/null
@@ -1,857 +0,0 @@
-/*
- * Copyright (C) 2001-2002	Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2003		Red Hat <alan@redhat.com>
- * Copyright (C) 2007-2008	MontaVista Software, Inc.
- * Copyright (C) 2007-2008	Bartlomiej Zolnierkiewicz
- *
- *  May be copied or modified under the terms of the GNU General Public License
- *
- *  Documentation for CMD680:
- *  http://gkernel.sourceforge.net/specs/sii/sii-0680a-v1.31.pdf.bz2
- *
- *  Documentation for SiI 3112:
- *  http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2
- *
- *  Errata and other documentation only available under NDA.
- *
- *
- *  FAQ Items:
- *	If you are using Marvell SATA-IDE adapters with Maxtor drives
- *	ensure the system is set up for ATA100/UDMA5, not UDMA6.
- *
- *	If you are using WD drives with SATA bridges you must set the
- *	drive to "Single". "Master" will hang.
- *
- *	If you have strange problems with nVidia chipset systems please
- *	see the SI support documentation and update your system BIOS
- *	if necessary
- *
- *  The Dell DRAC4 has some interesting features including effectively hot
- *  unplugging/replugging the virtual CD interface when the DRAC is reset.
- *  This often causes drivers/ide/siimage to panic but is ok with the rather
- *  smarter code in libata.
- *
- * TODO:
- * - IORDY fixes
- * - VDMA support
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#define DRV_NAME "siimage"
-
-/**
- *	pdev_is_sata		-	check if device is SATA
- *	@pdev:	PCI device to check
- *
- *	Returns true if this is a SATA controller
- */
-
-static int pdev_is_sata(struct pci_dev *pdev)
-{
-#ifdef CONFIG_BLK_DEV_IDE_SATA
-	switch (pdev->device) {
-	case PCI_DEVICE_ID_SII_3112:
-	case PCI_DEVICE_ID_SII_1210SA:
-		return 1;
-	case PCI_DEVICE_ID_SII_680:
-		return 0;
-	}
-	BUG();
-#endif
-	return 0;
-}
-
-/**
- *	is_sata			-	check if hwif is SATA
- *	@hwif:	interface to check
- *
- *	Returns true if this is a SATA controller
- */
-
-static inline int is_sata(ide_hwif_t *hwif)
-{
-	return pdev_is_sata(to_pci_dev(hwif->dev));
-}
-
-/**
- *	siimage_selreg		-	return register base
- *	@hwif: interface
- *	@r: config offset
- *
- *	Turn a config register offset into the right address in either
- *	PCI space or MMIO space to access the control register in question
- *	Thankfully this is a configuration operation, so isn't performance
- *	critical.
- */
-
-static unsigned long siimage_selreg(ide_hwif_t *hwif, int r)
-{
-	unsigned long base = (unsigned long)hwif->hwif_data;
-
-	base += 0xA0 + r;
-	if (hwif->host_flags & IDE_HFLAG_MMIO)
-		base += hwif->channel << 6;
-	else
-		base += hwif->channel << 4;
-	return base;
-}
-
-/**
- *	siimage_seldev		-	return register base
- *	@hwif: interface
- *	@r: config offset
- *
- *	Turn a config register offset into the right address in either
- *	PCI space or MMIO space to access the control register in question
- *	including accounting for the unit shift.
- */
-
-static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	unsigned long base	= (unsigned long)hwif->hwif_data;
-	u8 unit			= drive->dn & 1;
-
-	base += 0xA0 + r;
-	if (hwif->host_flags & IDE_HFLAG_MMIO)
-		base += hwif->channel << 6;
-	else
-		base += hwif->channel << 4;
-	base |= unit << unit;
-	return base;
-}
-
-static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-	u8 tmp = 0;
-
-	if (host->host_priv)
-		tmp = readb((void __iomem *)addr);
-	else
-		pci_read_config_byte(dev, addr, &tmp);
-
-	return tmp;
-}
-
-static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-	u16 tmp = 0;
-
-	if (host->host_priv)
-		tmp = readw((void __iomem *)addr);
-	else
-		pci_read_config_word(dev, addr, &tmp);
-
-	return tmp;
-}
-
-static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-
-	if (host->host_priv)
-		writeb(val, (void __iomem *)addr);
-	else
-		pci_write_config_byte(dev, addr, val);
-}
-
-static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-
-	if (host->host_priv)
-		writew(val, (void __iomem *)addr);
-	else
-		pci_write_config_word(dev, addr, val);
-}
-
-static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-
-	if (host->host_priv)
-		writel(val, (void __iomem *)addr);
-	else
-		pci_write_config_dword(dev, addr, val);
-}
-
-/**
- *	sil_udma_filter		-	compute UDMA mask
- *	@drive: IDE device
- *
- *	Compute the available UDMA speeds for the device on the interface.
- *
- *	For the CMD680 this depends on the clocking mode (scsc), for the
- *	SI3112 SATA controller life is a bit simpler.
- */
-
-static u8 sil_pata_udma_filter(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= drive->hwif;
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	unsigned long base	= (unsigned long)hwif->hwif_data;
-	u8 scsc, mask		= 0;
-
-	base += (hwif->host_flags & IDE_HFLAG_MMIO) ? 0x4A : 0x8A;
-
-	scsc = sil_ioread8(dev, base);
-
-	switch (scsc & 0x30) {
-	case 0x10:	/* 133 */
-		mask = ATA_UDMA6;
-		break;
-	case 0x20:	/* 2xPCI */
-		mask = ATA_UDMA6;
-		break;
-	case 0x00:	/* 100 */
-		mask = ATA_UDMA5;
-		break;
-	default: 	/* Disabled ? */
-		BUG();
-	}
-
-	return mask;
-}
-
-static u8 sil_sata_udma_filter(ide_drive_t *drive)
-{
-	char *m = (char *)&drive->id[ATA_ID_PROD];
-
-	return strstr(m, "Maxtor") ? ATA_UDMA5 : ATA_UDMA6;
-}
-
-/**
- *	sil_set_pio_mode	-	set host controller for PIO mode
- *	@drive: drive
- *	@pio: PIO mode number
- *
- *	Load the timing settings for this device mode into the
- *	controller. If we are in PIO mode 3 or 4 turn on IORDY
- *	monitoring (bit 9). The TF timing is bits 31:16
- */
-
-static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
-{
-	static const u16 tf_speed[]   = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 };
-	static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
-
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	ide_drive_t *pair	= ide_get_pair_dev(drive);
-	u32 speedt		= 0;
-	u16 speedp		= 0;
-	unsigned long addr	= siimage_seldev(drive, 0x04);
-	unsigned long tfaddr	= siimage_selreg(hwif,	0x02);
-	unsigned long base	= (unsigned long)hwif->hwif_data;
-	u8 tf_pio		= pio;
-	u8 mmio			= (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
-	u8 addr_mask		= hwif->channel ? (mmio ? 0xF4 : 0x84)
-						: (mmio ? 0xB4 : 0x80);
-	u8 mode			= 0;
-	u8 unit			= drive->dn & 1;
-
-	/* trim *taskfile* PIO to the slowest of the master/slave */
-	if (pair) {
-		u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);
-
-		if (pair_pio < tf_pio)
-			tf_pio = pair_pio;
-	}
-
-	/* cheat for now and use the docs */
-	speedp = data_speed[pio];
-	speedt = tf_speed[tf_pio];
-
-	sil_iowrite16(dev, speedp, addr);
-	sil_iowrite16(dev, speedt, tfaddr);
-
-	/* now set up IORDY */
-	speedp = sil_ioread16(dev, tfaddr - 2);
-	speedp &= ~0x200;
-	if (pio > 2)
-		speedp |= 0x200;
-	sil_iowrite16(dev, speedp, tfaddr - 2);
-
-	mode = sil_ioread8(dev, base + addr_mask);
-	mode &= ~(unit ? 0x30 : 0x03);
-	mode |= unit ? 0x10 : 0x01;
-	sil_iowrite8(dev, mode, base + addr_mask);
-}
-
-/**
- *	sil_set_dma_mode	-	set host controller for DMA mode
- *	@drive: drive
- *	@speed: DMA mode
- *
- *	Tune the SiI chipset for the desired DMA mode.
- */
-
-static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
-	static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
-	static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
-	static const u16 dma[]	 = { 0x2208, 0x10C2, 0x10C1 };
-
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	unsigned long base	= (unsigned long)hwif->hwif_data;
-	u16 ultra = 0, multi	= 0;
-	u8 mode = 0, unit	= drive->dn & 1;
-	u8 mmio			= (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
-	u8 scsc = 0, addr_mask	= hwif->channel ? (mmio ? 0xF4 : 0x84)
-						: (mmio ? 0xB4 : 0x80);
-	unsigned long ma	= siimage_seldev(drive, 0x08);
-	unsigned long ua	= siimage_seldev(drive, 0x0C);
-
-	scsc  = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A));
-	mode  = sil_ioread8 (dev, base + addr_mask);
-	multi = sil_ioread16(dev, ma);
-	ultra = sil_ioread16(dev, ua);
-
-	mode  &= ~(unit ? 0x30 : 0x03);
-	ultra &= ~0x3F;
-	scsc = ((scsc & 0x30) == 0x00) ? 0 : 1;
-
-	scsc = is_sata(hwif) ? 1 : scsc;
-
-	if (speed >= XFER_UDMA_0) {
-		multi  = dma[2];
-		ultra |= scsc ? ultra6[speed - XFER_UDMA_0] :
-				ultra5[speed - XFER_UDMA_0];
-		mode  |= unit ? 0x30 : 0x03;
-	} else {
-		multi = dma[speed - XFER_MW_DMA_0];
-		mode |= unit ? 0x20 : 0x02;
-	}
-
-	sil_iowrite8 (dev, mode, base + addr_mask);
-	sil_iowrite16(dev, multi, ma);
-	sil_iowrite16(dev, ultra, ua);
-}
-
-/* returns 1 if dma irq issued, 0 otherwise */
-static int siimage_io_dma_test_irq(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	u8 dma_altstat		= 0;
-	unsigned long addr	= siimage_selreg(hwif, 1);
-
-	/* return 1 if INTR asserted */
-	if (inb(hwif->dma_base + ATA_DMA_STATUS) & 4)
-		return 1;
-
-	/* return 1 if Device INTR asserted */
-	pci_read_config_byte(dev, addr, &dma_altstat);
-	if (dma_altstat & 8)
-		return 0;	/* return 1; */
-
-	return 0;
-}
-
-/**
- *	siimage_mmio_dma_test_irq	-	check we caused an IRQ
- *	@drive: drive we are testing
- *
- *	Check if we caused an IDE DMA interrupt. We may also have caused
- *	SATA status interrupts, if so we clean them up and continue.
- */
-
-static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	unsigned long addr	= siimage_selreg(hwif, 0x1);
-	void __iomem *sata_error_addr
-		= (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET];
-
-	if (sata_error_addr) {
-		unsigned long base	= (unsigned long)hwif->hwif_data;
-		u32 ext_stat		= readl((void __iomem *)(base + 0x10));
-		u8 watchdog		= 0;
-
-		if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) {
-			u32 sata_error = readl(sata_error_addr);
-
-			writel(sata_error, sata_error_addr);
-			watchdog = (sata_error & 0x00680000) ? 1 : 0;
-			printk(KERN_WARNING "%s: sata_error = 0x%08x, "
-				"watchdog = %d, %s\n",
-				drive->name, sata_error, watchdog, __func__);
-		} else
-			watchdog = (ext_stat & 0x8000) ? 1 : 0;
-
-		ext_stat >>= 16;
-		if (!(ext_stat & 0x0404) && !watchdog)
-			return 0;
-	}
-
-	/* return 1 if INTR asserted */
-	if (readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)) & 4)
-		return 1;
-
-	/* return 1 if Device INTR asserted */
-	if (readb((void __iomem *)addr) & 8)
-		return 0;	/* return 1; */
-
-	return 0;
-}
-
-static int siimage_dma_test_irq(ide_drive_t *drive)
-{
-	if (drive->hwif->host_flags & IDE_HFLAG_MMIO)
-		return siimage_mmio_dma_test_irq(drive);
-	else
-		return siimage_io_dma_test_irq(drive);
-}
-
-/**
- *	sil_sata_reset_poll	-	wait for SATA reset
- *	@drive: drive we are resetting
- *
- *	Poll the SATA phy and see whether it has come back from the dead
- *	yet.
- */
-
-static int sil_sata_reset_poll(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	void __iomem *sata_status_addr
-		= (void __iomem *)hwif->sata_scr[SATA_STATUS_OFFSET];
-
-	if (sata_status_addr) {
-		/* SATA Status is available only when in MMIO mode */
-		u32 sata_stat = readl(sata_status_addr);
-
-		if ((sata_stat & 0x03) != 0x03) {
-			printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
-					    hwif->name, sata_stat);
-			return -ENXIO;
-		}
-	}
-
-	return 0;
-}
-
-/**
- *	sil_sata_pre_reset	-	reset hook
- *	@drive: IDE device being reset
- *
- *	For the SATA devices we need to handle recalibration/geometry
- *	differently
- */
-
-static void sil_sata_pre_reset(ide_drive_t *drive)
-{
-	if (drive->media == ide_disk) {
-		drive->special.b.set_geometry = 0;
-		drive->special.b.recalibrate = 0;
-	}
-}
-
-/**
- *	init_chipset_siimage	-	set up an SI device
- *	@dev: PCI device
- *
- *	Perform the initial PCI set up for this device. Attempt to switch
- *	to 133 MHz clocking if the system isn't already set up to do it.
- */
-
-static unsigned int init_chipset_siimage(struct pci_dev *dev)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-	void __iomem *ioaddr = host->host_priv;
-	unsigned long base, scsc_addr;
-	u8 rev = dev->revision, tmp;
-
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255);
-
-	if (ioaddr)
-		pci_set_master(dev);
-
-	base = (unsigned long)ioaddr;
-
-	if (ioaddr && pdev_is_sata(dev)) {
-		u32 tmp32, irq_mask;
-
-		/* make sure IDE0/1 interrupts are not masked */
-		irq_mask = (1 << 22) | (1 << 23);
-		tmp32 = readl(ioaddr + 0x48);
-		if (tmp32 & irq_mask) {
-			tmp32 &= ~irq_mask;
-			writel(tmp32, ioaddr + 0x48);
-			readl(ioaddr + 0x48); /* flush */
-		}
-		writel(0, ioaddr + 0x148);
-		writel(0, ioaddr + 0x1C8);
-	}
-
-	sil_iowrite8(dev, 0, base ? (base + 0xB4) : 0x80);
-	sil_iowrite8(dev, 0, base ? (base + 0xF4) : 0x84);
-
-	scsc_addr = base ? (base + 0x4A) : 0x8A;
-	tmp = sil_ioread8(dev, scsc_addr);
-
-	switch (tmp & 0x30) {
-	case 0x00:
-		/* On 100 MHz clocking, try and switch to 133 MHz */
-		sil_iowrite8(dev, tmp | 0x10, scsc_addr);
-		break;
-	case 0x30:
-		/* Clocking is disabled, attempt to force 133MHz clocking. */
-		sil_iowrite8(dev, tmp & ~0x20, scsc_addr);
-	case 0x10:
-		/* On 133Mhz clocking. */
-		break;
-	case 0x20:
-		/* On PCIx2 clocking. */
-		break;
-	}
-
-	tmp = sil_ioread8(dev, scsc_addr);
-
-	sil_iowrite8 (dev,       0x72, base + 0xA1);
-	sil_iowrite16(dev,     0x328A, base + 0xA2);
-	sil_iowrite32(dev, 0x62DD62DD, base + 0xA4);
-	sil_iowrite32(dev, 0x43924392, base + 0xA8);
-	sil_iowrite32(dev, 0x40094009, base + 0xAC);
-	sil_iowrite8 (dev,       0x72, base ? (base + 0xE1) : 0xB1);
-	sil_iowrite16(dev,     0x328A, base ? (base + 0xE2) : 0xB2);
-	sil_iowrite32(dev, 0x62DD62DD, base ? (base + 0xE4) : 0xB4);
-	sil_iowrite32(dev, 0x43924392, base ? (base + 0xE8) : 0xB8);
-	sil_iowrite32(dev, 0x40094009, base ? (base + 0xEC) : 0xBC);
-
-	if (base && pdev_is_sata(dev)) {
-		writel(0xFFFF0000, ioaddr + 0x108);
-		writel(0xFFFF0000, ioaddr + 0x188);
-		writel(0x00680000, ioaddr + 0x148);
-		writel(0x00680000, ioaddr + 0x1C8);
-	}
-
-	/* report the clocking mode of the controller */
-	if (!pdev_is_sata(dev)) {
-		static const char *clk_str[] =
-			{ "== 100", "== 133", "== 2X PCI", "DISABLED!" };
-
-		tmp >>= 4;
-		printk(KERN_INFO DRV_NAME " %s: BASE CLOCK %s\n",
-			pci_name(dev), clk_str[tmp & 3]);
-	}
-
-	return 0;
-}
-
-/**
- *	init_mmio_iops_siimage	-	set up the iops for MMIO
- *	@hwif: interface to set up
- *
- *	The basic setup here is fairly simple, we can use standard MMIO
- *	operations. However we do have to set the taskfile register offsets
- *	by hand as there isn't a standard defined layout for them this time.
- *
- *	The hardware supports buffered taskfiles and also some rather nice
- *	extended PRD tables. For better SI3112 support use the libata driver
- */
-
-static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
-{
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	void *addr		= host->host_priv;
-	u8 ch			= hwif->channel;
-	struct ide_io_ports *io_ports = &hwif->io_ports;
-	unsigned long base;
-
-	/*
-	 *	Fill in the basic hwif bits
-	 */
-	hwif->host_flags |= IDE_HFLAG_MMIO;
-
-	hwif->hwif_data	= addr;
-
-	/*
-	 *	Now set up the hw. We have to do this ourselves as the
-	 *	MMIO layout isn't the same as the standard port based I/O.
-	 */
-	memset(io_ports, 0, sizeof(*io_ports));
-
-	base = (unsigned long)addr;
-	if (ch)
-		base += 0xC0;
-	else
-		base += 0x80;
-
-	/*
-	 *	The buffered task file doesn't have status/control, so we
-	 *	can't currently use it sanely since we want to use LBA48 mode.
-	 */
-	io_ports->data_addr	= base;
-	io_ports->error_addr	= base + 1;
-	io_ports->nsect_addr	= base + 2;
-	io_ports->lbal_addr	= base + 3;
-	io_ports->lbam_addr	= base + 4;
-	io_ports->lbah_addr	= base + 5;
-	io_ports->device_addr	= base + 6;
-	io_ports->status_addr	= base + 7;
-	io_ports->ctl_addr	= base + 10;
-
-	if (pdev_is_sata(dev)) {
-		base = (unsigned long)addr;
-		if (ch)
-			base += 0x80;
-		hwif->sata_scr[SATA_STATUS_OFFSET]	= base + 0x104;
-		hwif->sata_scr[SATA_ERROR_OFFSET]	= base + 0x108;
-		hwif->sata_scr[SATA_CONTROL_OFFSET]	= base + 0x100;
-	}
-
-	hwif->irq = dev->irq;
-
-	hwif->dma_base = (unsigned long)addr + (ch ? 0x08 : 0x00);
-}
-
-static int is_dev_seagate_sata(ide_drive_t *drive)
-{
-	const char *s	= (const char *)&drive->id[ATA_ID_PROD];
-	unsigned len	= strnlen(s, ATA_ID_PROD_LEN);
-
-	if ((len > 4) && (!memcmp(s, "ST", 2)))
-		if ((!memcmp(s + len - 2, "AS", 2)) ||
-		    (!memcmp(s + len - 3, "ASL", 3))) {
-			printk(KERN_INFO "%s: applying pessimistic Seagate "
-					 "errata fix\n", drive->name);
-			return 1;
-		}
-
-	return 0;
-}
-
-/**
- *	sil_quirkproc		-	post probe fixups
- *	@drive: drive
- *
- *	Called after drive probe we use this to decide whether the
- *	Seagate fixup must be applied. This used to be in init_iops but
- *	that can occur before we know what drives are present.
- */
-
-static void sil_quirkproc(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-
-	/* Try and rise the rqsize */
-	if (!is_sata(hwif) || !is_dev_seagate_sata(drive))
-		hwif->rqsize = 128;
-}
-
-/**
- *	init_iops_siimage	-	set up iops
- *	@hwif: interface to set up
- *
- *	Do the basic setup for the SIIMAGE hardware interface
- *	and then do the MMIO setup if we can. This is the first
- *	look in we get for setting up the hwif so that we
- *	can get the iops right before using them.
- */
-
-static void __devinit init_iops_siimage(ide_hwif_t *hwif)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	struct ide_host *host = pci_get_drvdata(dev);
-
-	hwif->hwif_data = NULL;
-
-	/* Pessimal until we finish probing */
-	hwif->rqsize = 15;
-
-	if (host->host_priv)
-		init_mmio_iops_siimage(hwif);
-}
-
-/**
- *	sil_cable_detect	-	cable detection
- *	@hwif: interface to check
- *
- *	Check for the presence of an ATA66 capable cable on the interface.
- */
-
-static u8 sil_cable_detect(ide_hwif_t *hwif)
-{
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	unsigned long addr	= siimage_selreg(hwif, 0);
-	u8 ata66		= sil_ioread8(dev, addr);
-
-	return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops sil_pata_port_ops = {
-	.set_pio_mode		= sil_set_pio_mode,
-	.set_dma_mode		= sil_set_dma_mode,
-	.quirkproc		= sil_quirkproc,
-	.udma_filter		= sil_pata_udma_filter,
-	.cable_detect		= sil_cable_detect,
-};
-
-static const struct ide_port_ops sil_sata_port_ops = {
-	.set_pio_mode		= sil_set_pio_mode,
-	.set_dma_mode		= sil_set_dma_mode,
-	.reset_poll		= sil_sata_reset_poll,
-	.pre_reset		= sil_sata_pre_reset,
-	.quirkproc		= sil_quirkproc,
-	.udma_filter		= sil_sata_udma_filter,
-	.cable_detect		= sil_cable_detect,
-};
-
-static const struct ide_dma_ops sil_dma_ops = {
-	.dma_host_set		= ide_dma_host_set,
-	.dma_setup		= ide_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
-	.dma_start		= ide_dma_start,
-	.dma_end		= ide_dma_end,
-	.dma_test_irq		= siimage_dma_test_irq,
-	.dma_timeout		= ide_dma_timeout,
-	.dma_lost_irq		= ide_dma_lost_irq,
-};
-
-#define DECLARE_SII_DEV(p_ops)				\
-	{						\
-		.name		= DRV_NAME,		\
-		.init_chipset	= init_chipset_siimage,	\
-		.init_iops	= init_iops_siimage,	\
-		.port_ops	= p_ops,		\
-		.dma_ops	= &sil_dma_ops,		\
-		.pio_mask	= ATA_PIO4,		\
-		.mwdma_mask	= ATA_MWDMA2,		\
-		.udma_mask	= ATA_UDMA6,		\
-	}
-
-static const struct ide_port_info siimage_chipsets[] __devinitdata = {
-	/* 0: SiI680 */  DECLARE_SII_DEV(&sil_pata_port_ops),
-	/* 1: SiI3112 */ DECLARE_SII_DEV(&sil_sata_port_ops)
-};
-
-/**
- *	siimage_init_one	-	PCI layer discovery entry
- *	@dev: PCI device
- *	@id: ident table entry
- *
- *	Called by the PCI code when it finds an SiI680 or SiI3112 controller.
- *	We then use the IDE PCI generic helper to do most of the work.
- */
-
-static int __devinit siimage_init_one(struct pci_dev *dev,
-				      const struct pci_device_id *id)
-{
-	void __iomem *ioaddr = NULL;
-	resource_size_t bar5 = pci_resource_start(dev, 5);
-	unsigned long barsize = pci_resource_len(dev, 5);
-	int rc;
-	struct ide_port_info d;
-	u8 idx = id->driver_data;
-	u8 BA5_EN;
-
-	d = siimage_chipsets[idx];
-
-	if (idx) {
-		static int first = 1;
-
-		if (first) {
-			printk(KERN_INFO DRV_NAME ": For full SATA support you "
-				"should use the libata sata_sil module.\n");
-			first = 0;
-		}
-
-		d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
-	}
-
-	rc = pci_enable_device(dev);
-	if (rc)
-		return rc;
-
-	pci_read_config_byte(dev, 0x8A, &BA5_EN);
-	if ((BA5_EN & 0x01) || bar5) {
-		/*
-		* Drop back to PIO if we can't map the MMIO. Some systems
-		* seem to get terminally confused in the PCI spaces.
-		*/
-		if (!request_mem_region(bar5, barsize, d.name)) {
-			printk(KERN_WARNING DRV_NAME " %s: MMIO ports not "
-				"available\n", pci_name(dev));
-		} else {
-			ioaddr = ioremap(bar5, barsize);
-			if (ioaddr == NULL)
-				release_mem_region(bar5, barsize);
-		}
-	}
-
-	rc = ide_pci_init_one(dev, &d, ioaddr);
-	if (rc) {
-		if (ioaddr) {
-			iounmap(ioaddr);
-			release_mem_region(bar5, barsize);
-		}
-		pci_disable_device(dev);
-	}
-
-	return rc;
-}
-
-static void __devexit siimage_remove(struct pci_dev *dev)
-{
-	struct ide_host *host = pci_get_drvdata(dev);
-	void __iomem *ioaddr = host->host_priv;
-
-	ide_pci_remove(dev);
-
-	if (ioaddr) {
-		resource_size_t bar5 = pci_resource_start(dev, 5);
-		unsigned long barsize = pci_resource_len(dev, 5);
-
-		iounmap(ioaddr);
-		release_mem_region(bar5, barsize);
-	}
-
-	pci_disable_device(dev);
-}
-
-static const struct pci_device_id siimage_pci_tbl[] = {
-	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680),    0 },
-#ifdef CONFIG_BLK_DEV_IDE_SATA
-	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_3112),   1 },
-	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_1210SA), 1 },
-#endif
-	{ 0, },
-};
-MODULE_DEVICE_TABLE(pci, siimage_pci_tbl);
-
-static struct pci_driver siimage_pci_driver = {
-	.name		= "SiI_IDE",
-	.id_table	= siimage_pci_tbl,
-	.probe		= siimage_init_one,
-	.remove		= __devexit_p(siimage_remove),
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
-};
-
-static int __init siimage_ide_init(void)
-{
-	return ide_pci_register_driver(&siimage_pci_driver);
-}
-
-static void __exit siimage_ide_exit(void)
-{
-	pci_unregister_driver(&siimage_pci_driver);
-}
-
-module_init(siimage_ide_init);
-module_exit(siimage_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick, Alan Cox");
-MODULE_DESCRIPTION("PCI driver module for SiI IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c
similarity index 100%
rename from drivers/ide/pci/pdc202xx_new.c
rename to drivers/ide/pdc202xx_new.c
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
similarity index 100%
rename from drivers/ide/pci/pdc202xx_old.c
rename to drivers/ide/pdc202xx_old.c
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/piix.c
similarity index 100%
rename from drivers/ide/pci/piix.c
rename to drivers/ide/piix.c
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/pmac.c
similarity index 100%
rename from drivers/ide/ppc/pmac.c
rename to drivers/ide/pmac.c
diff --git a/drivers/ide/ppc/Makefile b/drivers/ide/ppc/Makefile
deleted file mode 100644
index 74e52ad..0000000
--- a/drivers/ide/ppc/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-
-obj-$(CONFIG_BLK_DEV_IDE_PMAC)		+= pmac.o
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/q40ide.c
similarity index 100%
rename from drivers/ide/legacy/q40ide.c
rename to drivers/ide/q40ide.c
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/qd65xx.c
similarity index 100%
rename from drivers/ide/legacy/qd65xx.c
rename to drivers/ide/qd65xx.c
diff --git a/drivers/ide/legacy/qd65xx.h b/drivers/ide/qd65xx.h
similarity index 100%
rename from drivers/ide/legacy/qd65xx.h
rename to drivers/ide/qd65xx.h
diff --git a/drivers/ide/rapide.c b/drivers/ide/rapide.c
new file mode 100644
index 0000000..d5003ca
--- /dev/null
+++ b/drivers/ide/rapide.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 1996-2002 Russell King.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/errno.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#include <asm/ecard.h>
+
+static const struct ide_port_info rapide_port_info = {
+	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
+};
+
+static void rapide_setup_ports(hw_regs_t *hw, void __iomem *base,
+			       void __iomem *ctrl, unsigned int sz, int irq)
+{
+	unsigned long port = (unsigned long)base;
+	int i;
+
+	for (i = 0; i <= 7; i++) {
+		hw->io_ports_array[i] = port;
+		port += sz;
+	}
+	hw->io_ports.ctl_addr = (unsigned long)ctrl;
+	hw->irq = irq;
+}
+
+static int __devinit
+rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
+{
+	void __iomem *base;
+	struct ide_host *host;
+	int ret;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+
+	ret = ecard_request_resources(ec);
+	if (ret)
+		goto out;
+
+	base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
+	if (!base) {
+		ret = -ENOMEM;
+		goto release;
+	}
+
+	memset(&hw, 0, sizeof(hw));
+	rapide_setup_ports(&hw, base, base + 0x818, 1 << 6, ec->irq);
+	hw.chipset = ide_generic;
+	hw.dev = &ec->dev;
+
+	ret = ide_host_add(&rapide_port_info, hws, &host);
+	if (ret)
+		goto release;
+
+	ecard_set_drvdata(ec, host);
+	goto out;
+
+ release:
+	ecard_release_resources(ec);
+ out:
+	return ret;
+}
+
+static void __devexit rapide_remove(struct expansion_card *ec)
+{
+	struct ide_host *host = ecard_get_drvdata(ec);
+
+	ecard_set_drvdata(ec, NULL);
+
+	ide_host_remove(host);
+
+	ecard_release_resources(ec);
+}
+
+static struct ecard_id rapide_ids[] = {
+	{ MANU_YELLOWSTONE, PROD_YELLOWSTONE_RAPIDE32 },
+	{ 0xffff, 0xffff }
+};
+
+static struct ecard_driver rapide_driver = {
+	.probe		= rapide_probe,
+	.remove		= __devexit_p(rapide_remove),
+	.id_table	= rapide_ids,
+	.drv = {
+		.name	= "rapide",
+	},
+};
+
+static int __init rapide_init(void)
+{
+	return ecard_register_driver(&rapide_driver);
+}
+
+static void __exit rapide_exit(void)
+{
+	ecard_remove_driver(&rapide_driver);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Yellowstone RAPIDE driver");
+
+module_init(rapide_init);
+module_exit(rapide_exit);
diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/rz1000.c
similarity index 100%
rename from drivers/ide/pci/rz1000.c
rename to drivers/ide/rz1000.c
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/sc1200.c
similarity index 100%
rename from drivers/ide/pci/sc1200.c
rename to drivers/ide/sc1200.c
diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c
new file mode 100644
index 0000000..f26aa5d
--- /dev/null
+++ b/drivers/ide/scc_pata.c
@@ -0,0 +1,964 @@
+/*
+ * Support for IDE interfaces on Celleb platform
+ *
+ * (C) Copyright 2006 TOSHIBA CORPORATION
+ *
+ * This code is based on drivers/ide/pci/siimage.c:
+ * Copyright (C) 2001-2002	Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2003		Red Hat <alan@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA            0x01b4
+
+#define SCC_PATA_NAME           "scc IDE"
+
+#define TDVHSEL_MASTER          0x00000001
+#define TDVHSEL_SLAVE           0x00000004
+
+#define MODE_JCUSFEN            0x00000080
+
+#define CCKCTRL_ATARESET        0x00040000
+#define CCKCTRL_BUFCNT          0x00020000
+#define CCKCTRL_CRST            0x00010000
+#define CCKCTRL_OCLKEN          0x00000100
+#define CCKCTRL_ATACLKOEN       0x00000002
+#define CCKCTRL_LCLKEN          0x00000001
+
+#define QCHCD_IOS_SS		0x00000001
+
+#define QCHSD_STPDIAG		0x00020000
+
+#define INTMASK_MSK             0xD1000012
+#define INTSTS_SERROR		0x80000000
+#define INTSTS_PRERR		0x40000000
+#define INTSTS_RERR		0x10000000
+#define INTSTS_ICERR		0x01000000
+#define INTSTS_BMSINT		0x00000010
+#define INTSTS_BMHE		0x00000008
+#define INTSTS_IOIRQS           0x00000004
+#define INTSTS_INTRQ            0x00000002
+#define INTSTS_ACTEINT          0x00000001
+
+#define ECMODE_VALUE 0x01
+
+static struct scc_ports {
+	unsigned long ctl, dma;
+	struct ide_host *host;	/* for removing port from system */
+} scc_ports[MAX_HWIFS];
+
+/* PIO transfer mode  table */
+/* JCHST */
+static unsigned long JCHSTtbl[2][7] = {
+	{0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00},   /* 100MHz */
+	{0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00}    /* 133MHz */
+};
+
+/* JCHHT */
+static unsigned long JCHHTtbl[2][7] = {
+	{0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00},   /* 100MHz */
+	{0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00}    /* 133MHz */
+};
+
+/* JCHCT */
+static unsigned long JCHCTtbl[2][7] = {
+	{0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00},   /* 100MHz */
+	{0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00}    /* 133MHz */
+};
+
+
+/* DMA transfer mode  table */
+/* JCHDCTM/JCHDCTS */
+static unsigned long JCHDCTxtbl[2][7] = {
+	{0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00},   /* 100MHz */
+	{0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00}    /* 133MHz */
+};
+
+/* JCSTWTM/JCSTWTS  */
+static unsigned long JCSTWTxtbl[2][7] = {
+	{0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00},   /* 100MHz */
+	{0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02}    /* 133MHz */
+};
+
+/* JCTSS */
+static unsigned long JCTSStbl[2][7] = {
+	{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00},   /* 100MHz */
+	{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05}    /* 133MHz */
+};
+
+/* JCENVT */
+static unsigned long JCENVTtbl[2][7] = {
+	{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00},   /* 100MHz */
+	{0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02}    /* 133MHz */
+};
+
+/* JCACTSELS/JCACTSELM */
+static unsigned long JCACTSELtbl[2][7] = {
+	{0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00},   /* 100MHz */
+	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01}    /* 133MHz */
+};
+
+
+static u8 scc_ide_inb(unsigned long port)
+{
+	u32 data = in_be32((void*)port);
+	return (u8)data;
+}
+
+static void scc_exec_command(ide_hwif_t *hwif, u8 cmd)
+{
+	out_be32((void *)hwif->io_ports.command_addr, cmd);
+	eieio();
+	in_be32((void *)(hwif->dma_base + 0x01c));
+	eieio();
+}
+
+static u8 scc_read_status(ide_hwif_t *hwif)
+{
+	return (u8)in_be32((void *)hwif->io_ports.status_addr);
+}
+
+static u8 scc_read_altstatus(ide_hwif_t *hwif)
+{
+	return (u8)in_be32((void *)hwif->io_ports.ctl_addr);
+}
+
+static u8 scc_read_sff_dma_status(ide_hwif_t *hwif)
+{
+	return (u8)in_be32((void *)(hwif->dma_base + 4));
+}
+
+static void scc_set_irq(ide_hwif_t *hwif, int on)
+{
+	u8 ctl = ATA_DEVCTL_OBS;
+
+	if (on == 4) { /* hack for SRST */
+		ctl |= 4;
+		on &= ~4;
+	}
+
+	ctl |= on ? 0 : 2;
+
+	out_be32((void *)hwif->io_ports.ctl_addr, ctl);
+	eieio();
+	in_be32((void *)(hwif->dma_base + 0x01c));
+	eieio();
+}
+
+static void scc_ide_insw(unsigned long port, void *addr, u32 count)
+{
+	u16 *ptr = (u16 *)addr;
+	while (count--) {
+		*ptr++ = le16_to_cpu(in_be32((void*)port));
+	}
+}
+
+static void scc_ide_insl(unsigned long port, void *addr, u32 count)
+{
+	u16 *ptr = (u16 *)addr;
+	while (count--) {
+		*ptr++ = le16_to_cpu(in_be32((void*)port));
+		*ptr++ = le16_to_cpu(in_be32((void*)port));
+	}
+}
+
+static void scc_ide_outb(u8 addr, unsigned long port)
+{
+	out_be32((void*)port, addr);
+}
+
+static void
+scc_ide_outsw(unsigned long port, void *addr, u32 count)
+{
+	u16 *ptr = (u16 *)addr;
+	while (count--) {
+		out_be32((void*)port, cpu_to_le16(*ptr++));
+	}
+}
+
+static void
+scc_ide_outsl(unsigned long port, void *addr, u32 count)
+{
+	u16 *ptr = (u16 *)addr;
+	while (count--) {
+		out_be32((void*)port, cpu_to_le16(*ptr++));
+		out_be32((void*)port, cpu_to_le16(*ptr++));
+	}
+}
+
+/**
+ *	scc_set_pio_mode	-	set host controller for PIO mode
+ *	@drive: drive
+ *	@pio: PIO mode number
+ *
+ *	Load the timing settings for this device mode into the
+ *	controller.
+ */
+
+static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	struct scc_ports *ports = ide_get_hwifdata(hwif);
+	unsigned long ctl_base = ports->ctl;
+	unsigned long cckctrl_port = ctl_base + 0xff0;
+	unsigned long piosht_port = ctl_base + 0x000;
+	unsigned long pioct_port = ctl_base + 0x004;
+	unsigned long reg;
+	int offset;
+
+	reg = in_be32((void __iomem *)cckctrl_port);
+	if (reg & CCKCTRL_ATACLKOEN) {
+		offset = 1; /* 133MHz */
+	} else {
+		offset = 0; /* 100MHz */
+	}
+	reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
+	out_be32((void __iomem *)piosht_port, reg);
+	reg = JCHCTtbl[offset][pio];
+	out_be32((void __iomem *)pioct_port, reg);
+}
+
+/**
+ *	scc_set_dma_mode	-	set host controller for DMA mode
+ *	@drive: drive
+ *	@speed: DMA mode
+ *
+ *	Load the timing settings for this device mode into the
+ *	controller.
+ */
+
+static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	struct scc_ports *ports = ide_get_hwifdata(hwif);
+	unsigned long ctl_base = ports->ctl;
+	unsigned long cckctrl_port = ctl_base + 0xff0;
+	unsigned long mdmact_port = ctl_base + 0x008;
+	unsigned long mcrcst_port = ctl_base + 0x00c;
+	unsigned long sdmact_port = ctl_base + 0x010;
+	unsigned long scrcst_port = ctl_base + 0x014;
+	unsigned long udenvt_port = ctl_base + 0x018;
+	unsigned long tdvhsel_port   = ctl_base + 0x020;
+	int is_slave = (&hwif->drives[1] == drive);
+	int offset, idx;
+	unsigned long reg;
+	unsigned long jcactsel;
+
+	reg = in_be32((void __iomem *)cckctrl_port);
+	if (reg & CCKCTRL_ATACLKOEN) {
+		offset = 1; /* 133MHz */
+	} else {
+		offset = 0; /* 100MHz */
+	}
+
+	idx = speed - XFER_UDMA_0;
+
+	jcactsel = JCACTSELtbl[offset][idx];
+	if (is_slave) {
+		out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]);
+		out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]);
+		jcactsel = jcactsel << 2;
+		out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel);
+	} else {
+		out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]);
+		out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]);
+		out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel);
+	}
+	reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
+	out_be32((void __iomem *)udenvt_port, reg);
+}
+
+static void scc_dma_host_set(ide_drive_t *drive, int on)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	u8 unit = drive->dn & 1;
+	u8 dma_stat = scc_ide_inb(hwif->dma_base + 4);
+
+	if (on)
+		dma_stat |= (1 << (5 + unit));
+	else
+		dma_stat &= ~(1 << (5 + unit));
+
+	scc_ide_outb(dma_stat, hwif->dma_base + 4);
+}
+
+/**
+ *	scc_ide_dma_setup	-	begin a DMA phase
+ *	@drive: target device
+ *
+ *	Build an IDE DMA PRD (IDE speak for scatter gather table)
+ *	and then set up the DMA transfer registers.
+ *
+ *	Returns 0 on success. If a PIO fallback is required then 1
+ *	is returned.
+ */
+
+static int scc_dma_setup(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct request *rq = HWGROUP(drive)->rq;
+	unsigned int reading;
+	u8 dma_stat;
+
+	if (rq_data_dir(rq))
+		reading = 0;
+	else
+		reading = 1 << 3;
+
+	/* fall back to pio! */
+	if (!ide_build_dmatable(drive, rq)) {
+		ide_map_sg(drive, rq);
+		return 1;
+	}
+
+	/* PRD table */
+	out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma);
+
+	/* specify r/w */
+	out_be32((void __iomem *)hwif->dma_base, reading);
+
+	/* read DMA status for INTR & ERROR flags */
+	dma_stat = in_be32((void __iomem *)(hwif->dma_base + 4));
+
+	/* clear INTR & ERROR flags */
+	out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6);
+	drive->waiting_for_dma = 1;
+	return 0;
+}
+
+static void scc_dma_start(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	u8 dma_cmd = scc_ide_inb(hwif->dma_base);
+
+	/* start DMA */
+	scc_ide_outb(dma_cmd | 1, hwif->dma_base);
+	wmb();
+}
+
+static int __scc_dma_end(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	u8 dma_stat, dma_cmd;
+
+	drive->waiting_for_dma = 0;
+	/* get DMA command mode */
+	dma_cmd = scc_ide_inb(hwif->dma_base);
+	/* stop DMA */
+	scc_ide_outb(dma_cmd & ~1, hwif->dma_base);
+	/* get DMA status */
+	dma_stat = scc_ide_inb(hwif->dma_base + 4);
+	/* clear the INTR & ERROR bits */
+	scc_ide_outb(dma_stat | 6, hwif->dma_base + 4);
+	/* purge DMA mappings */
+	ide_destroy_dmatable(drive);
+	/* verify good DMA status */
+	wmb();
+	return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
+}
+
+/**
+ *	scc_dma_end	-	Stop DMA
+ *	@drive: IDE drive
+ *
+ *	Check and clear INT Status register.
+ *	Then call __scc_dma_end().
+ */
+
+static int scc_dma_end(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	void __iomem *dma_base = (void __iomem *)hwif->dma_base;
+	unsigned long intsts_port = hwif->dma_base + 0x014;
+	u32 reg;
+	int dma_stat, data_loss = 0;
+	static int retry = 0;
+
+	/* errata A308 workaround: Step5 (check data loss) */
+	/* We don't check non ide_disk because it is limited to UDMA4 */
+	if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr)
+	      & ATA_ERR) &&
+	    drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) {
+		reg = in_be32((void __iomem *)intsts_port);
+		if (!(reg & INTSTS_ACTEINT)) {
+			printk(KERN_WARNING "%s: operation failed (transfer data loss)\n",
+			       drive->name);
+			data_loss = 1;
+			if (retry++) {
+				struct request *rq = HWGROUP(drive)->rq;
+				int unit;
+				/* ERROR_RESET and drive->crc_count are needed
+				 * to reduce DMA transfer mode in retry process.
+				 */
+				if (rq)
+					rq->errors |= ERROR_RESET;
+				for (unit = 0; unit < MAX_DRIVES; unit++) {
+					ide_drive_t *drive = &hwif->drives[unit];
+					drive->crc_count++;
+				}
+			}
+		}
+	}
+
+	while (1) {
+		reg = in_be32((void __iomem *)intsts_port);
+
+		if (reg & INTSTS_SERROR) {
+			printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
+			out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
+
+			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
+			continue;
+		}
+
+		if (reg & INTSTS_PRERR) {
+			u32 maea0, maec0;
+			unsigned long ctl_base = hwif->config_data;
+
+			maea0 = in_be32((void __iomem *)(ctl_base + 0xF50));
+			maec0 = in_be32((void __iomem *)(ctl_base + 0xF54));
+
+			printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
+
+			out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
+
+			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
+			continue;
+		}
+
+		if (reg & INTSTS_RERR) {
+			printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
+			out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
+
+			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
+			continue;
+		}
+
+		if (reg & INTSTS_ICERR) {
+			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
+
+			printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
+			out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
+			continue;
+		}
+
+		if (reg & INTSTS_BMSINT) {
+			printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
+			out_be32((void __iomem *)intsts_port, INTSTS_BMSINT);
+
+			ide_do_reset(drive);
+			continue;
+		}
+
+		if (reg & INTSTS_BMHE) {
+			out_be32((void __iomem *)intsts_port, INTSTS_BMHE);
+			continue;
+		}
+
+		if (reg & INTSTS_ACTEINT) {
+			out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT);
+			continue;
+		}
+
+		if (reg & INTSTS_IOIRQS) {
+			out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS);
+			continue;
+		}
+		break;
+	}
+
+	dma_stat = __scc_dma_end(drive);
+	if (data_loss)
+		dma_stat |= 2; /* emulate DMA error (to retry command) */
+	return dma_stat;
+}
+
+/* returns 1 if dma irq issued, 0 otherwise */
+static int scc_dma_test_irq(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014);
+
+	/* SCC errata A252,A308 workaround: Step4 */
+	if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr)
+	     & ATA_ERR) &&
+	    (int_stat & INTSTS_INTRQ))
+		return 1;
+
+	/* SCC errata A308 workaround: Step5 (polling IOIRQS) */
+	if (int_stat & INTSTS_IOIRQS)
+		return 1;
+
+	return 0;
+}
+
+static u8 scc_udma_filter(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	u8 mask = hwif->ultra_mask;
+
+	/* errata A308 workaround: limit non ide_disk drive to UDMA4 */
+	if ((drive->media != ide_disk) && (mask & 0xE0)) {
+		printk(KERN_INFO "%s: limit %s to UDMA4\n",
+		       SCC_PATA_NAME, drive->name);
+		mask = ATA_UDMA4;
+	}
+
+	return mask;
+}
+
+/**
+ *	setup_mmio_scc	-	map CTRL/BMID region
+ *	@dev: PCI device we are configuring
+ *	@name: device name
+ *
+ */
+
+static int setup_mmio_scc (struct pci_dev *dev, const char *name)
+{
+	void __iomem *ctl_addr;
+	void __iomem *dma_addr;
+	int i, ret;
+
+	for (i = 0; i < MAX_HWIFS; i++) {
+		if (scc_ports[i].ctl == 0)
+			break;
+	}
+	if (i >= MAX_HWIFS)
+		return -ENOMEM;
+
+	ret = pci_request_selected_regions(dev, (1 << 2) - 1, name);
+	if (ret < 0) {
+		printk(KERN_ERR "%s: can't reserve resources\n", name);
+		return ret;
+	}
+
+	ctl_addr = pci_ioremap_bar(dev, 0);
+	if (!ctl_addr)
+		goto fail_0;
+
+	dma_addr = pci_ioremap_bar(dev, 1);
+	if (!dma_addr)
+		goto fail_1;
+
+	pci_set_master(dev);
+	scc_ports[i].ctl = (unsigned long)ctl_addr;
+	scc_ports[i].dma = (unsigned long)dma_addr;
+	pci_set_drvdata(dev, (void *) &scc_ports[i]);
+
+	return 1;
+
+ fail_1:
+	iounmap(ctl_addr);
+ fail_0:
+	return -ENOMEM;
+}
+
+static int scc_ide_setup_pci_device(struct pci_dev *dev,
+				    const struct ide_port_info *d)
+{
+	struct scc_ports *ports = pci_get_drvdata(dev);
+	struct ide_host *host;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	int i, rc;
+
+	memset(&hw, 0, sizeof(hw));
+	for (i = 0; i <= 8; i++)
+		hw.io_ports_array[i] = ports->dma + 0x20 + i * 4;
+	hw.irq = dev->irq;
+	hw.dev = &dev->dev;
+	hw.chipset = ide_pci;
+
+	rc = ide_host_add(d, hws, &host);
+	if (rc)
+		return rc;
+
+	ports->host = host;
+
+	return 0;
+}
+
+/**
+ *	init_setup_scc	-	set up an SCC PATA Controller
+ *	@dev: PCI device
+ *	@d: IDE port info
+ *
+ *	Perform the initial set up for this device.
+ */
+
+static int __devinit init_setup_scc(struct pci_dev *dev,
+				    const struct ide_port_info *d)
+{
+	unsigned long ctl_base;
+	unsigned long dma_base;
+	unsigned long cckctrl_port;
+	unsigned long intmask_port;
+	unsigned long mode_port;
+	unsigned long ecmode_port;
+	u32 reg = 0;
+	struct scc_ports *ports;
+	int rc;
+
+	rc = pci_enable_device(dev);
+	if (rc)
+		goto end;
+
+	rc = setup_mmio_scc(dev, d->name);
+	if (rc < 0)
+		goto end;
+
+	ports = pci_get_drvdata(dev);
+	ctl_base = ports->ctl;
+	dma_base = ports->dma;
+	cckctrl_port = ctl_base + 0xff0;
+	intmask_port = dma_base + 0x010;
+	mode_port = ctl_base + 0x024;
+	ecmode_port = ctl_base + 0xf00;
+
+	/* controller initialization */
+	reg = 0;
+	out_be32((void*)cckctrl_port, reg);
+	reg |= CCKCTRL_ATACLKOEN;
+	out_be32((void*)cckctrl_port, reg);
+	reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
+	out_be32((void*)cckctrl_port, reg);
+	reg |= CCKCTRL_CRST;
+	out_be32((void*)cckctrl_port, reg);
+
+	for (;;) {
+		reg = in_be32((void*)cckctrl_port);
+		if (reg & CCKCTRL_CRST)
+			break;
+		udelay(5000);
+	}
+
+	reg |= CCKCTRL_ATARESET;
+	out_be32((void*)cckctrl_port, reg);
+
+	out_be32((void*)ecmode_port, ECMODE_VALUE);
+	out_be32((void*)mode_port, MODE_JCUSFEN);
+	out_be32((void*)intmask_port, INTMASK_MSK);
+
+	rc = scc_ide_setup_pci_device(dev, d);
+
+ end:
+	return rc;
+}
+
+static void scc_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+	struct ide_io_ports *io_ports = &drive->hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+	u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
+
+	if (task->tf_flags & IDE_TFLAG_FLAGGED)
+		HIHI = 0xFF;
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DATA)
+		out_be32((void *)io_ports->data_addr,
+			 (tf->hob_data << 8) | tf->data);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+		scc_ide_outb(tf->hob_feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+		scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+		scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+		scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+		scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+		scc_ide_outb(tf->feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+		scc_ide_outb(tf->nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+		scc_ide_outb(tf->lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+		scc_ide_outb(tf->lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+		scc_ide_outb(tf->lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+		scc_ide_outb((tf->device & HIHI) | drive->select,
+			     io_ports->device_addr);
+}
+
+static void scc_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+	struct ide_io_ports *io_ports = &drive->hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+
+	if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+		u16 data = (u16)in_be32((void *)io_ports->data_addr);
+
+		tf->data = data & 0xff;
+		tf->hob_data = (data >> 8) & 0xff;
+	}
+
+	/* be sure we're looking at the low order bits */
+	scc_ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
+
+	if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+		tf->feature = scc_ide_inb(io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+		tf->nsect  = scc_ide_inb(io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+		tf->lbal   = scc_ide_inb(io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+		tf->lbam   = scc_ide_inb(io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+		tf->lbah   = scc_ide_inb(io_ports->lbah_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+		tf->device = scc_ide_inb(io_ports->device_addr);
+
+	if (task->tf_flags & IDE_TFLAG_LBA48) {
+		scc_ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
+
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+			tf->hob_feature = scc_ide_inb(io_ports->feature_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+			tf->hob_nsect   = scc_ide_inb(io_ports->nsect_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+			tf->hob_lbal    = scc_ide_inb(io_ports->lbal_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+			tf->hob_lbam    = scc_ide_inb(io_ports->lbam_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+			tf->hob_lbah    = scc_ide_inb(io_ports->lbah_addr);
+	}
+}
+
+static void scc_input_data(ide_drive_t *drive, struct request *rq,
+			   void *buf, unsigned int len)
+{
+	unsigned long data_addr = drive->hwif->io_ports.data_addr;
+
+	len++;
+
+	if (drive->io_32bit) {
+		scc_ide_insl(data_addr, buf, len / 4);
+
+		if ((len & 3) >= 2)
+			scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1);
+	} else
+		scc_ide_insw(data_addr, buf, len / 2);
+}
+
+static void scc_output_data(ide_drive_t *drive,  struct request *rq,
+			    void *buf, unsigned int len)
+{
+	unsigned long data_addr = drive->hwif->io_ports.data_addr;
+
+	len++;
+
+	if (drive->io_32bit) {
+		scc_ide_outsl(data_addr, buf, len / 4);
+
+		if ((len & 3) >= 2)
+			scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1);
+	} else
+		scc_ide_outsw(data_addr, buf, len / 2);
+}
+
+/**
+ *	init_mmio_iops_scc	-	set up the iops for MMIO
+ *	@hwif: interface to set up
+ *
+ */
+
+static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	struct scc_ports *ports = pci_get_drvdata(dev);
+	unsigned long dma_base = ports->dma;
+
+	ide_set_hwifdata(hwif, ports);
+
+	hwif->dma_base = dma_base;
+	hwif->config_data = ports->ctl;
+}
+
+/**
+ *	init_iops_scc	-	set up iops
+ *	@hwif: interface to set up
+ *
+ *	Do the basic setup for the SCC hardware interface
+ *	and then do the MMIO setup.
+ */
+
+static void __devinit init_iops_scc(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+
+	hwif->hwif_data = NULL;
+	if (pci_get_drvdata(dev) == NULL)
+		return;
+	init_mmio_iops_scc(hwif);
+}
+
+static int __devinit scc_init_dma(ide_hwif_t *hwif,
+				  const struct ide_port_info *d)
+{
+	return ide_allocate_dma_engine(hwif);
+}
+
+static u8 scc_cable_detect(ide_hwif_t *hwif)
+{
+	return ATA_CBL_PATA80;
+}
+
+/**
+ *	init_hwif_scc	-	set up hwif
+ *	@hwif: interface to set up
+ *
+ *	We do the basic set up of the interface structure. The SCC
+ *	requires several custom handlers so we override the default
+ *	ide DMA handlers appropriately.
+ */
+
+static void __devinit init_hwif_scc(ide_hwif_t *hwif)
+{
+	/* PTERADD */
+	out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
+
+	if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN)
+		hwif->ultra_mask = ATA_UDMA6; /* 133MHz */
+	else
+		hwif->ultra_mask = ATA_UDMA5; /* 100MHz */
+}
+
+static const struct ide_tp_ops scc_tp_ops = {
+	.exec_command		= scc_exec_command,
+	.read_status		= scc_read_status,
+	.read_altstatus		= scc_read_altstatus,
+	.read_sff_dma_status	= scc_read_sff_dma_status,
+
+	.set_irq		= scc_set_irq,
+
+	.tf_load		= scc_tf_load,
+	.tf_read		= scc_tf_read,
+
+	.input_data		= scc_input_data,
+	.output_data		= scc_output_data,
+};
+
+static const struct ide_port_ops scc_port_ops = {
+	.set_pio_mode		= scc_set_pio_mode,
+	.set_dma_mode		= scc_set_dma_mode,
+	.udma_filter		= scc_udma_filter,
+	.cable_detect		= scc_cable_detect,
+};
+
+static const struct ide_dma_ops scc_dma_ops = {
+	.dma_host_set		= scc_dma_host_set,
+	.dma_setup		= scc_dma_setup,
+	.dma_exec_cmd		= ide_dma_exec_cmd,
+	.dma_start		= scc_dma_start,
+	.dma_end		= scc_dma_end,
+	.dma_test_irq		= scc_dma_test_irq,
+	.dma_lost_irq		= ide_dma_lost_irq,
+	.dma_timeout		= ide_dma_timeout,
+};
+
+#define DECLARE_SCC_DEV(name_str)			\
+  {							\
+      .name		= name_str,			\
+      .init_iops	= init_iops_scc,		\
+      .init_dma		= scc_init_dma,			\
+      .init_hwif	= init_hwif_scc,		\
+      .tp_ops		= &scc_tp_ops,		\
+      .port_ops		= &scc_port_ops,		\
+      .dma_ops		= &scc_dma_ops,			\
+      .host_flags	= IDE_HFLAG_SINGLE,		\
+      .pio_mask		= ATA_PIO4,			\
+  }
+
+static const struct ide_port_info scc_chipsets[] __devinitdata = {
+	/* 0 */ DECLARE_SCC_DEV("sccIDE"),
+};
+
+/**
+ *	scc_init_one	-	pci layer discovery entry
+ *	@dev: PCI device
+ *	@id: ident table entry
+ *
+ *	Called by the PCI code when it finds an SCC PATA controller.
+ *	We then use the IDE PCI generic helper to do most of the work.
+ */
+
+static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	return init_setup_scc(dev, &scc_chipsets[id->driver_data]);
+}
+
+/**
+ *	scc_remove	-	pci layer remove entry
+ *	@dev: PCI device
+ *
+ *	Called by the PCI code when it removes an SCC PATA controller.
+ */
+
+static void __devexit scc_remove(struct pci_dev *dev)
+{
+	struct scc_ports *ports = pci_get_drvdata(dev);
+	struct ide_host *host = ports->host;
+
+	ide_host_remove(host);
+
+	iounmap((void*)ports->dma);
+	iounmap((void*)ports->ctl);
+	pci_release_selected_regions(dev, (1 << 2) - 1);
+	memset(ports, 0, sizeof(*ports));
+}
+
+static const struct pci_device_id scc_pci_tbl[] = {
+	{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 },
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
+
+static struct pci_driver scc_pci_driver = {
+	.name = "SCC IDE",
+	.id_table = scc_pci_tbl,
+	.probe = scc_init_one,
+	.remove = __devexit_p(scc_remove),
+};
+
+static int scc_ide_init(void)
+{
+	return ide_pci_register_driver(&scc_pci_driver);
+}
+
+module_init(scc_ide_init);
+/* -- No exit code?
+static void scc_ide_exit(void)
+{
+	ide_pci_unregister_driver(&scc_pci_driver);
+}
+module_exit(scc_ide_exit);
+ */
+
+
+MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/serverworks.c
similarity index 100%
rename from drivers/ide/pci/serverworks.c
rename to drivers/ide/serverworks.c
diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c
new file mode 100644
index 0000000..7defa0a
--- /dev/null
+++ b/drivers/ide/sgiioc4.c
@@ -0,0 +1,664 @@
+/*
+ * Copyright (c) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (C) 2008 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * For further information regarding this notice, see:
+ *
+ * http://oss.sgi.com/projects/GenInfo/NoticeExplan
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <linux/scatterlist.h>
+#include <linux/ioc4.h>
+#include <asm/io.h>
+
+#include <linux/ide.h>
+
+#define DRV_NAME "SGIIOC4"
+
+/* IOC4 Specific Definitions */
+#define IOC4_CMD_OFFSET		0x100
+#define IOC4_CTRL_OFFSET	0x120
+#define IOC4_DMA_OFFSET		0x140
+#define IOC4_INTR_OFFSET	0x0
+
+#define IOC4_TIMING		0x00
+#define IOC4_DMA_PTR_L		0x01
+#define IOC4_DMA_PTR_H		0x02
+#define IOC4_DMA_ADDR_L		0x03
+#define IOC4_DMA_ADDR_H		0x04
+#define IOC4_BC_DEV		0x05
+#define IOC4_BC_MEM		0x06
+#define	IOC4_DMA_CTRL		0x07
+#define	IOC4_DMA_END_ADDR	0x08
+
+/* Bits in the IOC4 Control/Status Register */
+#define	IOC4_S_DMA_START	0x01
+#define	IOC4_S_DMA_STOP		0x02
+#define	IOC4_S_DMA_DIR		0x04
+#define	IOC4_S_DMA_ACTIVE	0x08
+#define	IOC4_S_DMA_ERROR	0x10
+#define	IOC4_ATA_MEMERR		0x02
+
+/* Read/Write Directions */
+#define	IOC4_DMA_WRITE		0x04
+#define	IOC4_DMA_READ		0x00
+
+/* Interrupt Register Offsets */
+#define IOC4_INTR_REG		0x03
+#define	IOC4_INTR_SET		0x05
+#define	IOC4_INTR_CLEAR		0x07
+
+#define IOC4_IDE_CACHELINE_SIZE	128
+#define IOC4_CMD_CTL_BLK_SIZE	0x20
+#define IOC4_SUPPORTED_FIRMWARE_REV 46
+
+typedef struct {
+	u32 timing_reg0;
+	u32 timing_reg1;
+	u32 low_mem_ptr;
+	u32 high_mem_ptr;
+	u32 low_mem_addr;
+	u32 high_mem_addr;
+	u32 dev_byte_count;
+	u32 mem_byte_count;
+	u32 status;
+} ioc4_dma_regs_t;
+
+/* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */
+/* IOC4 has only 1 IDE channel */
+#define IOC4_PRD_BYTES       16
+#define IOC4_PRD_ENTRIES     (PAGE_SIZE /(4*IOC4_PRD_BYTES))
+
+
+static void
+sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
+			unsigned long ctrl_port, unsigned long irq_port)
+{
+	unsigned long reg = data_port;
+	int i;
+
+	/* Registers are word (32 bit) aligned */
+	for (i = 0; i <= 7; i++)
+		hw->io_ports_array[i] = reg + i * 4;
+
+	hw->io_ports.ctl_addr = ctrl_port;
+	hw->io_ports.irq_addr = irq_port;
+}
+
+static int
+sgiioc4_checkirq(ide_hwif_t * hwif)
+{
+	unsigned long intr_addr =
+		hwif->io_ports.irq_addr + IOC4_INTR_REG * 4;
+
+	if ((u8)readl((void __iomem *)intr_addr) & 0x03)
+		return 1;
+
+	return 0;
+}
+
+static u8 sgiioc4_read_status(ide_hwif_t *);
+
+static int
+sgiioc4_clearirq(ide_drive_t * drive)
+{
+	u32 intr_reg;
+	ide_hwif_t *hwif = HWIF(drive);
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	unsigned long other_ir = io_ports->irq_addr + (IOC4_INTR_REG << 2);
+
+	/* Code to check for PCI error conditions */
+	intr_reg = readl((void __iomem *)other_ir);
+	if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */
+		/*
+		 * Using sgiioc4_read_status to read the Status register has a
+		 * side effect of clearing the interrupt.  The first read should
+		 * clear it if it is set.  The second read should return
+		 * a "clear" status if it got cleared.  If not, then spin
+		 * for a bit trying to clear it.
+		 */
+		u8 stat = sgiioc4_read_status(hwif);
+		int count = 0;
+
+		stat = sgiioc4_read_status(hwif);
+		while ((stat & ATA_BUSY) && (count++ < 100)) {
+			udelay(1);
+			stat = sgiioc4_read_status(hwif);
+		}
+
+		if (intr_reg & 0x02) {
+			struct pci_dev *dev = to_pci_dev(hwif->dev);
+			/* Error when transferring DMA data on PCI bus */
+			u32 pci_err_addr_low, pci_err_addr_high,
+			    pci_stat_cmd_reg;
+
+			pci_err_addr_low =
+				readl((void __iomem *)io_ports->irq_addr);
+			pci_err_addr_high =
+				readl((void __iomem *)(io_ports->irq_addr + 4));
+			pci_read_config_dword(dev, PCI_COMMAND,
+					      &pci_stat_cmd_reg);
+			printk(KERN_ERR
+			       "%s(%s) : PCI Bus Error when doing DMA:"
+				   " status-cmd reg is 0x%x\n",
+			       __func__, drive->name, pci_stat_cmd_reg);
+			printk(KERN_ERR
+			       "%s(%s) : PCI Error Address is 0x%x%x\n",
+			       __func__, drive->name,
+			       pci_err_addr_high, pci_err_addr_low);
+			/* Clear the PCI Error indicator */
+			pci_write_config_dword(dev, PCI_COMMAND, 0x00000146);
+		}
+
+		/* Clear the Interrupt, Error bits on the IOC4 */
+		writel(0x03, (void __iomem *)other_ir);
+
+		intr_reg = readl((void __iomem *)other_ir);
+	}
+
+	return intr_reg & 3;
+}
+
+static void sgiioc4_dma_start(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	unsigned long ioc4_dma_addr = hwif->dma_base + IOC4_DMA_CTRL * 4;
+	unsigned int reg = readl((void __iomem *)ioc4_dma_addr);
+	unsigned int temp_reg = reg | IOC4_S_DMA_START;
+
+	writel(temp_reg, (void __iomem *)ioc4_dma_addr);
+}
+
+static u32
+sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
+{
+	unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
+	u32	ioc4_dma;
+	int	count;
+
+	count = 0;
+	ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
+	while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) {
+		udelay(1);
+		ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
+	}
+	return ioc4_dma;
+}
+
+/* Stops the IOC4 DMA Engine */
+static int sgiioc4_dma_end(ide_drive_t *drive)
+{
+	u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0;
+	ide_hwif_t *hwif = HWIF(drive);
+	unsigned long dma_base = hwif->dma_base;
+	int dma_stat = 0;
+	unsigned long *ending_dma = ide_get_hwifdata(hwif);
+
+	writel(IOC4_S_DMA_STOP, (void __iomem *)(dma_base + IOC4_DMA_CTRL * 4));
+
+	ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
+
+	if (ioc4_dma & IOC4_S_DMA_STOP) {
+		printk(KERN_ERR
+		       "%s(%s): IOC4 DMA STOP bit is still 1 :"
+		       "ioc4_dma_reg 0x%x\n",
+		       __func__, drive->name, ioc4_dma);
+		dma_stat = 1;
+	}
+
+	/*
+	 * The IOC4 will DMA 1's to the ending dma area to indicate that
+	 * previous data DMA is complete.  This is necessary because of relaxed
+	 * ordering between register reads and DMA writes on the Altix.
+	 */
+	while ((cnt++ < 200) && (!valid)) {
+		for (num = 0; num < 16; num++) {
+			if (ending_dma[num]) {
+				valid = 1;
+				break;
+			}
+		}
+		udelay(1);
+	}
+	if (!valid) {
+		printk(KERN_ERR "%s(%s) : DMA incomplete\n", __func__,
+		       drive->name);
+		dma_stat = 1;
+	}
+
+	bc_dev = readl((void __iomem *)(dma_base + IOC4_BC_DEV * 4));
+	bc_mem = readl((void __iomem *)(dma_base + IOC4_BC_MEM * 4));
+
+	if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) {
+		if (bc_dev > bc_mem + 8) {
+			printk(KERN_ERR
+			       "%s(%s): WARNING!! byte_count_dev %d "
+			       "!= byte_count_mem %d\n",
+			       __func__, drive->name, bc_dev, bc_mem);
+		}
+	}
+
+	drive->waiting_for_dma = 0;
+	ide_destroy_dmatable(drive);
+
+	return dma_stat;
+}
+
+static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed)
+{
+}
+
+/* returns 1 if dma irq issued, 0 otherwise */
+static int sgiioc4_dma_test_irq(ide_drive_t *drive)
+{
+	return sgiioc4_checkirq(HWIF(drive));
+}
+
+static void sgiioc4_dma_host_set(ide_drive_t *drive, int on)
+{
+	if (!on)
+		sgiioc4_clearirq(drive);
+}
+
+static void
+sgiioc4_resetproc(ide_drive_t * drive)
+{
+	sgiioc4_dma_end(drive);
+	sgiioc4_clearirq(drive);
+}
+
+static void
+sgiioc4_dma_lost_irq(ide_drive_t * drive)
+{
+	sgiioc4_resetproc(drive);
+
+	ide_dma_lost_irq(drive);
+}
+
+static u8 sgiioc4_read_status(ide_hwif_t *hwif)
+{
+	unsigned long port = hwif->io_ports.status_addr;
+	u8 reg = (u8) readb((void __iomem *) port);
+
+	if (!(reg & ATA_BUSY)) {	/* Not busy... check for interrupt */
+		unsigned long other_ir = port - 0x110;
+		unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
+
+		/* Clear the Interrupt, Error bits on the IOC4 */
+		if (intr_reg & 0x03) {
+			writel(0x03, (void __iomem *) other_ir);
+			intr_reg = (u32) readl((void __iomem *) other_ir);
+		}
+	}
+
+	return reg;
+}
+
+/* Creates a dma map for the scatter-gather list entries */
+static int __devinit
+ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
+{
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
+	int num_ports = sizeof (ioc4_dma_regs_t);
+	void *pad;
+
+	printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
+
+	if (request_mem_region(dma_base, num_ports, hwif->name) == NULL) {
+		printk(KERN_ERR "%s(%s) -- ERROR: addresses 0x%08lx to 0x%08lx "
+		       "already in use\n", __func__, hwif->name,
+		       dma_base, dma_base + num_ports - 1);
+		return -1;
+	}
+
+	hwif->dma_base = (unsigned long)hwif->io_ports.irq_addr +
+			 IOC4_DMA_OFFSET;
+
+	hwif->sg_max_nents = IOC4_PRD_ENTRIES;
+
+	hwif->prd_max_nents = IOC4_PRD_ENTRIES;
+	hwif->prd_ent_size = IOC4_PRD_BYTES;
+
+	if (ide_allocate_dma_engine(hwif))
+		goto dma_pci_alloc_failure;
+
+	pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
+				   (dma_addr_t *)&hwif->extra_base);
+	if (pad) {
+		ide_set_hwifdata(hwif, pad);
+		return 0;
+	}
+
+	ide_release_dma_engine(hwif);
+
+	printk(KERN_ERR "%s(%s) -- ERROR: Unable to allocate DMA maps\n",
+	       __func__, hwif->name);
+	printk(KERN_INFO "%s: changing from DMA to PIO mode", hwif->name);
+
+dma_pci_alloc_failure:
+	release_mem_region(dma_base, num_ports);
+
+	return -1;
+}
+
+/* Initializes the IOC4 DMA Engine */
+static void
+sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
+{
+	u32 ioc4_dma;
+	ide_hwif_t *hwif = HWIF(drive);
+	unsigned long dma_base = hwif->dma_base;
+	unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
+	u32 dma_addr, ending_dma_addr;
+
+	ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
+
+	if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
+		printk(KERN_WARNING
+			"%s(%s):Warning!! DMA from previous transfer was still active\n",
+		       __func__, drive->name);
+		writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
+		ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
+
+		if (ioc4_dma & IOC4_S_DMA_STOP)
+			printk(KERN_ERR
+			       "%s(%s) : IOC4 Dma STOP bit is still 1\n",
+			       __func__, drive->name);
+	}
+
+	ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
+	if (ioc4_dma & IOC4_S_DMA_ERROR) {
+		printk(KERN_WARNING
+		       "%s(%s) : Warning!! - DMA Error during Previous"
+		       " transfer | status 0x%x\n",
+		       __func__, drive->name, ioc4_dma);
+		writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
+		ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
+
+		if (ioc4_dma & IOC4_S_DMA_STOP)
+			printk(KERN_ERR
+			       "%s(%s) : IOC4 DMA STOP bit is still 1\n",
+			       __func__, drive->name);
+	}
+
+	/* Address of the Scatter Gather List */
+	dma_addr = cpu_to_le32(hwif->dmatable_dma);
+	writel(dma_addr, (void __iomem *)(dma_base + IOC4_DMA_PTR_L * 4));
+
+	/* Address of the Ending DMA */
+	memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
+	ending_dma_addr = cpu_to_le32(hwif->extra_base);
+	writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4));
+
+	writel(dma_direction, (void __iomem *)ioc4_dma_addr);
+	drive->waiting_for_dma = 1;
+}
+
+/* IOC4 Scatter Gather list Format 					 */
+/* 128 Bit entries to support 64 bit addresses in the future		 */
+/* The Scatter Gather list Entry should be in the BIG-ENDIAN Format	 */
+/* --------------------------------------------------------------------- */
+/* | Upper 32 bits - Zero           |	 	Lower 32 bits- address | */
+/* --------------------------------------------------------------------- */
+/* | Upper 32 bits - Zero	    |EOL| 15 unused     | 16 Bit Length| */
+/* --------------------------------------------------------------------- */
+/* Creates the scatter gather list, DMA Table */
+static unsigned int
+sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	unsigned int *table = hwif->dmatable_cpu;
+	unsigned int count = 0, i = 1;
+	struct scatterlist *sg;
+
+	hwif->sg_nents = i = ide_build_sglist(drive, rq);
+
+	if (!i)
+		return 0;	/* sglist of length Zero */
+
+	sg = hwif->sg_table;
+	while (i && sg_dma_len(sg)) {
+		dma_addr_t cur_addr;
+		int cur_len;
+		cur_addr = sg_dma_address(sg);
+		cur_len = sg_dma_len(sg);
+
+		while (cur_len) {
+			if (count++ >= IOC4_PRD_ENTRIES) {
+				printk(KERN_WARNING
+				       "%s: DMA table too small\n",
+				       drive->name);
+				goto use_pio_instead;
+			} else {
+				u32 bcount =
+				    0x10000 - (cur_addr & 0xffff);
+
+				if (bcount > cur_len)
+					bcount = cur_len;
+
+				/* put the addr, length in
+				 * the IOC4 dma-table format */
+				*table = 0x0;
+				table++;
+				*table = cpu_to_be32(cur_addr);
+				table++;
+				*table = 0x0;
+				table++;
+
+				*table = cpu_to_be32(bcount);
+				table++;
+
+				cur_addr += bcount;
+				cur_len -= bcount;
+			}
+		}
+
+		sg = sg_next(sg);
+		i--;
+	}
+
+	if (count) {
+		table--;
+		*table |= cpu_to_be32(0x80000000);
+		return count;
+	}
+
+use_pio_instead:
+	ide_destroy_dmatable(drive);
+
+	return 0;		/* revert to PIO for this request */
+}
+
+static int sgiioc4_dma_setup(ide_drive_t *drive)
+{
+	struct request *rq = HWGROUP(drive)->rq;
+	unsigned int count = 0;
+	int ddir;
+
+	if (rq_data_dir(rq))
+		ddir = PCI_DMA_TODEVICE;
+	else
+		ddir = PCI_DMA_FROMDEVICE;
+
+	if (!(count = sgiioc4_build_dma_table(drive, rq, ddir))) {
+		/* try PIO instead of DMA */
+		ide_map_sg(drive, rq);
+		return 1;
+	}
+
+	if (rq_data_dir(rq))
+		/* Writes TO the IOC4 FROM Main Memory */
+		ddir = IOC4_DMA_READ;
+	else
+		/* Writes FROM the IOC4 TO Main Memory */
+		ddir = IOC4_DMA_WRITE;
+
+	sgiioc4_configure_for_dma(ddir, drive);
+
+	return 0;
+}
+
+static const struct ide_tp_ops sgiioc4_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= sgiioc4_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.read_sff_dma_status	= ide_read_sff_dma_status,
+
+	.set_irq		= ide_set_irq,
+
+	.tf_load		= ide_tf_load,
+	.tf_read		= ide_tf_read,
+
+	.input_data		= ide_input_data,
+	.output_data		= ide_output_data,
+};
+
+static const struct ide_port_ops sgiioc4_port_ops = {
+	.set_dma_mode		= sgiioc4_set_dma_mode,
+	/* reset DMA engine, clear IRQs */
+	.resetproc		= sgiioc4_resetproc,
+};
+
+static const struct ide_dma_ops sgiioc4_dma_ops = {
+	.dma_host_set		= sgiioc4_dma_host_set,
+	.dma_setup		= sgiioc4_dma_setup,
+	.dma_start		= sgiioc4_dma_start,
+	.dma_end		= sgiioc4_dma_end,
+	.dma_test_irq		= sgiioc4_dma_test_irq,
+	.dma_lost_irq		= sgiioc4_dma_lost_irq,
+	.dma_timeout		= ide_dma_timeout,
+};
+
+static const struct ide_port_info sgiioc4_port_info __devinitdata = {
+	.name			= DRV_NAME,
+	.chipset		= ide_pci,
+	.init_dma		= ide_dma_sgiioc4,
+	.tp_ops			= &sgiioc4_tp_ops,
+	.port_ops		= &sgiioc4_port_ops,
+	.dma_ops		= &sgiioc4_dma_ops,
+	.host_flags		= IDE_HFLAG_MMIO,
+	.mwdma_mask		= ATA_MWDMA2_ONLY,
+};
+
+static int __devinit
+sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
+{
+	unsigned long cmd_base, irqport;
+	unsigned long bar0, cmd_phys_base, ctl;
+	void __iomem *virt_base;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	int rc;
+
+	/*  Get the CmdBlk and CtrlBlk Base Registers */
+	bar0 = pci_resource_start(dev, 0);
+	virt_base = pci_ioremap_bar(dev, 0);
+	if (virt_base == NULL) {
+		printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
+				DRV_NAME, bar0);
+		return -ENOMEM;
+	}
+	cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET;
+	ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET;
+	irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
+
+	cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
+	if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
+			       DRV_NAME) == NULL) {
+		printk(KERN_ERR "%s %s -- ERROR: addresses 0x%08lx to 0x%08lx "
+		       "already in use\n", DRV_NAME, pci_name(dev),
+		       cmd_phys_base, cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
+		rc = -EBUSY;
+		goto req_mem_rgn_err;
+	}
+
+	/* Initialize the IO registers */
+	memset(&hw, 0, sizeof(hw));
+	sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport);
+	hw.irq = dev->irq;
+	hw.chipset = ide_pci;
+	hw.dev = &dev->dev;
+
+	/* Initializing chipset IRQ Registers */
+	writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
+
+	rc = ide_host_add(&sgiioc4_port_info, hws, NULL);
+	if (!rc)
+		return 0;
+
+	release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE);
+req_mem_rgn_err:
+	iounmap(virt_base);
+	return rc;
+}
+
+static unsigned int __devinit
+pci_init_sgiioc4(struct pci_dev *dev)
+{
+	int ret;
+
+	printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n",
+			 DRV_NAME, pci_name(dev), dev->revision);
+
+	if (dev->revision < IOC4_SUPPORTED_FIRMWARE_REV) {
+		printk(KERN_ERR "Skipping %s IDE controller in slot %s: "
+				"firmware is obsolete - please upgrade to "
+				"revision46 or higher\n",
+				DRV_NAME, pci_name(dev));
+		ret = -EAGAIN;
+		goto out;
+	}
+	ret = sgiioc4_ide_setup_pci_device(dev);
+out:
+	return ret;
+}
+
+int
+ioc4_ide_attach_one(struct ioc4_driver_data *idd)
+{
+	/* PCI-RT does not bring out IDE connection.
+	 * Do not attach to this particular IOC4.
+	 */
+	if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
+		return 0;
+
+	return pci_init_sgiioc4(idd->idd_pdev);
+}
+
+static struct ioc4_submodule ioc4_ide_submodule = {
+	.is_name = "IOC4_ide",
+	.is_owner = THIS_MODULE,
+	.is_probe = ioc4_ide_attach_one,
+/*	.is_remove = ioc4_ide_remove_one,	*/
+};
+
+static int __init ioc4_ide_init(void)
+{
+	return ioc4_register_submodule(&ioc4_ide_submodule);
+}
+
+late_initcall(ioc4_ide_init); /* Call only after IDE init is done */
+
+MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
+MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c
new file mode 100644
index 0000000..c3107df
--- /dev/null
+++ b/drivers/ide/siimage.c
@@ -0,0 +1,857 @@
+/*
+ * Copyright (C) 2001-2002	Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2003		Red Hat <alan@redhat.com>
+ * Copyright (C) 2007-2008	MontaVista Software, Inc.
+ * Copyright (C) 2007-2008	Bartlomiej Zolnierkiewicz
+ *
+ *  May be copied or modified under the terms of the GNU General Public License
+ *
+ *  Documentation for CMD680:
+ *  http://gkernel.sourceforge.net/specs/sii/sii-0680a-v1.31.pdf.bz2
+ *
+ *  Documentation for SiI 3112:
+ *  http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2
+ *
+ *  Errata and other documentation only available under NDA.
+ *
+ *
+ *  FAQ Items:
+ *	If you are using Marvell SATA-IDE adapters with Maxtor drives
+ *	ensure the system is set up for ATA100/UDMA5, not UDMA6.
+ *
+ *	If you are using WD drives with SATA bridges you must set the
+ *	drive to "Single". "Master" will hang.
+ *
+ *	If you have strange problems with nVidia chipset systems please
+ *	see the SI support documentation and update your system BIOS
+ *	if necessary
+ *
+ *  The Dell DRAC4 has some interesting features including effectively hot
+ *  unplugging/replugging the virtual CD interface when the DRAC is reset.
+ *  This often causes drivers/ide/siimage to panic but is ok with the rather
+ *  smarter code in libata.
+ *
+ * TODO:
+ * - IORDY fixes
+ * - VDMA support
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#define DRV_NAME "siimage"
+
+/**
+ *	pdev_is_sata		-	check if device is SATA
+ *	@pdev:	PCI device to check
+ *
+ *	Returns true if this is a SATA controller
+ */
+
+static int pdev_is_sata(struct pci_dev *pdev)
+{
+#ifdef CONFIG_BLK_DEV_IDE_SATA
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_SII_3112:
+	case PCI_DEVICE_ID_SII_1210SA:
+		return 1;
+	case PCI_DEVICE_ID_SII_680:
+		return 0;
+	}
+	BUG();
+#endif
+	return 0;
+}
+
+/**
+ *	is_sata			-	check if hwif is SATA
+ *	@hwif:	interface to check
+ *
+ *	Returns true if this is a SATA controller
+ */
+
+static inline int is_sata(ide_hwif_t *hwif)
+{
+	return pdev_is_sata(to_pci_dev(hwif->dev));
+}
+
+/**
+ *	siimage_selreg		-	return register base
+ *	@hwif: interface
+ *	@r: config offset
+ *
+ *	Turn a config register offset into the right address in either
+ *	PCI space or MMIO space to access the control register in question
+ *	Thankfully this is a configuration operation, so isn't performance
+ *	critical.
+ */
+
+static unsigned long siimage_selreg(ide_hwif_t *hwif, int r)
+{
+	unsigned long base = (unsigned long)hwif->hwif_data;
+
+	base += 0xA0 + r;
+	if (hwif->host_flags & IDE_HFLAG_MMIO)
+		base += hwif->channel << 6;
+	else
+		base += hwif->channel << 4;
+	return base;
+}
+
+/**
+ *	siimage_seldev		-	return register base
+ *	@hwif: interface
+ *	@r: config offset
+ *
+ *	Turn a config register offset into the right address in either
+ *	PCI space or MMIO space to access the control register in question
+ *	including accounting for the unit shift.
+ */
+
+static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	unsigned long base	= (unsigned long)hwif->hwif_data;
+	u8 unit			= drive->dn & 1;
+
+	base += 0xA0 + r;
+	if (hwif->host_flags & IDE_HFLAG_MMIO)
+		base += hwif->channel << 6;
+	else
+		base += hwif->channel << 4;
+	base |= unit << unit;
+	return base;
+}
+
+static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	u8 tmp = 0;
+
+	if (host->host_priv)
+		tmp = readb((void __iomem *)addr);
+	else
+		pci_read_config_byte(dev, addr, &tmp);
+
+	return tmp;
+}
+
+static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	u16 tmp = 0;
+
+	if (host->host_priv)
+		tmp = readw((void __iomem *)addr);
+	else
+		pci_read_config_word(dev, addr, &tmp);
+
+	return tmp;
+}
+
+static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+
+	if (host->host_priv)
+		writeb(val, (void __iomem *)addr);
+	else
+		pci_write_config_byte(dev, addr, val);
+}
+
+static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+
+	if (host->host_priv)
+		writew(val, (void __iomem *)addr);
+	else
+		pci_write_config_word(dev, addr, val);
+}
+
+static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+
+	if (host->host_priv)
+		writel(val, (void __iomem *)addr);
+	else
+		pci_write_config_dword(dev, addr, val);
+}
+
+/**
+ *	sil_udma_filter		-	compute UDMA mask
+ *	@drive: IDE device
+ *
+ *	Compute the available UDMA speeds for the device on the interface.
+ *
+ *	For the CMD680 this depends on the clocking mode (scsc), for the
+ *	SI3112 SATA controller life is a bit simpler.
+ */
+
+static u8 sil_pata_udma_filter(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif	= drive->hwif;
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	unsigned long base	= (unsigned long)hwif->hwif_data;
+	u8 scsc, mask		= 0;
+
+	base += (hwif->host_flags & IDE_HFLAG_MMIO) ? 0x4A : 0x8A;
+
+	scsc = sil_ioread8(dev, base);
+
+	switch (scsc & 0x30) {
+	case 0x10:	/* 133 */
+		mask = ATA_UDMA6;
+		break;
+	case 0x20:	/* 2xPCI */
+		mask = ATA_UDMA6;
+		break;
+	case 0x00:	/* 100 */
+		mask = ATA_UDMA5;
+		break;
+	default: 	/* Disabled ? */
+		BUG();
+	}
+
+	return mask;
+}
+
+static u8 sil_sata_udma_filter(ide_drive_t *drive)
+{
+	char *m = (char *)&drive->id[ATA_ID_PROD];
+
+	return strstr(m, "Maxtor") ? ATA_UDMA5 : ATA_UDMA6;
+}
+
+/**
+ *	sil_set_pio_mode	-	set host controller for PIO mode
+ *	@drive: drive
+ *	@pio: PIO mode number
+ *
+ *	Load the timing settings for this device mode into the
+ *	controller. If we are in PIO mode 3 or 4 turn on IORDY
+ *	monitoring (bit 9). The TF timing is bits 31:16
+ */
+
+static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
+{
+	static const u16 tf_speed[]   = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 };
+	static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
+
+	ide_hwif_t *hwif	= HWIF(drive);
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	ide_drive_t *pair	= ide_get_pair_dev(drive);
+	u32 speedt		= 0;
+	u16 speedp		= 0;
+	unsigned long addr	= siimage_seldev(drive, 0x04);
+	unsigned long tfaddr	= siimage_selreg(hwif,	0x02);
+	unsigned long base	= (unsigned long)hwif->hwif_data;
+	u8 tf_pio		= pio;
+	u8 mmio			= (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+	u8 addr_mask		= hwif->channel ? (mmio ? 0xF4 : 0x84)
+						: (mmio ? 0xB4 : 0x80);
+	u8 mode			= 0;
+	u8 unit			= drive->dn & 1;
+
+	/* trim *taskfile* PIO to the slowest of the master/slave */
+	if (pair) {
+		u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);
+
+		if (pair_pio < tf_pio)
+			tf_pio = pair_pio;
+	}
+
+	/* cheat for now and use the docs */
+	speedp = data_speed[pio];
+	speedt = tf_speed[tf_pio];
+
+	sil_iowrite16(dev, speedp, addr);
+	sil_iowrite16(dev, speedt, tfaddr);
+
+	/* now set up IORDY */
+	speedp = sil_ioread16(dev, tfaddr - 2);
+	speedp &= ~0x200;
+	if (pio > 2)
+		speedp |= 0x200;
+	sil_iowrite16(dev, speedp, tfaddr - 2);
+
+	mode = sil_ioread8(dev, base + addr_mask);
+	mode &= ~(unit ? 0x30 : 0x03);
+	mode |= unit ? 0x10 : 0x01;
+	sil_iowrite8(dev, mode, base + addr_mask);
+}
+
+/**
+ *	sil_set_dma_mode	-	set host controller for DMA mode
+ *	@drive: drive
+ *	@speed: DMA mode
+ *
+ *	Tune the SiI chipset for the desired DMA mode.
+ */
+
+static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
+{
+	static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
+	static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
+	static const u16 dma[]	 = { 0x2208, 0x10C2, 0x10C1 };
+
+	ide_hwif_t *hwif	= HWIF(drive);
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	unsigned long base	= (unsigned long)hwif->hwif_data;
+	u16 ultra = 0, multi	= 0;
+	u8 mode = 0, unit	= drive->dn & 1;
+	u8 mmio			= (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+	u8 scsc = 0, addr_mask	= hwif->channel ? (mmio ? 0xF4 : 0x84)
+						: (mmio ? 0xB4 : 0x80);
+	unsigned long ma	= siimage_seldev(drive, 0x08);
+	unsigned long ua	= siimage_seldev(drive, 0x0C);
+
+	scsc  = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A));
+	mode  = sil_ioread8 (dev, base + addr_mask);
+	multi = sil_ioread16(dev, ma);
+	ultra = sil_ioread16(dev, ua);
+
+	mode  &= ~(unit ? 0x30 : 0x03);
+	ultra &= ~0x3F;
+	scsc = ((scsc & 0x30) == 0x00) ? 0 : 1;
+
+	scsc = is_sata(hwif) ? 1 : scsc;
+
+	if (speed >= XFER_UDMA_0) {
+		multi  = dma[2];
+		ultra |= scsc ? ultra6[speed - XFER_UDMA_0] :
+				ultra5[speed - XFER_UDMA_0];
+		mode  |= unit ? 0x30 : 0x03;
+	} else {
+		multi = dma[speed - XFER_MW_DMA_0];
+		mode |= unit ? 0x20 : 0x02;
+	}
+
+	sil_iowrite8 (dev, mode, base + addr_mask);
+	sil_iowrite16(dev, multi, ma);
+	sil_iowrite16(dev, ultra, ua);
+}
+
+/* returns 1 if dma irq issued, 0 otherwise */
+static int siimage_io_dma_test_irq(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	u8 dma_altstat		= 0;
+	unsigned long addr	= siimage_selreg(hwif, 1);
+
+	/* return 1 if INTR asserted */
+	if (inb(hwif->dma_base + ATA_DMA_STATUS) & 4)
+		return 1;
+
+	/* return 1 if Device INTR asserted */
+	pci_read_config_byte(dev, addr, &dma_altstat);
+	if (dma_altstat & 8)
+		return 0;	/* return 1; */
+
+	return 0;
+}
+
+/**
+ *	siimage_mmio_dma_test_irq	-	check we caused an IRQ
+ *	@drive: drive we are testing
+ *
+ *	Check if we caused an IDE DMA interrupt. We may also have caused
+ *	SATA status interrupts, if so we clean them up and continue.
+ */
+
+static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	unsigned long addr	= siimage_selreg(hwif, 0x1);
+	void __iomem *sata_error_addr
+		= (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET];
+
+	if (sata_error_addr) {
+		unsigned long base	= (unsigned long)hwif->hwif_data;
+		u32 ext_stat		= readl((void __iomem *)(base + 0x10));
+		u8 watchdog		= 0;
+
+		if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) {
+			u32 sata_error = readl(sata_error_addr);
+
+			writel(sata_error, sata_error_addr);
+			watchdog = (sata_error & 0x00680000) ? 1 : 0;
+			printk(KERN_WARNING "%s: sata_error = 0x%08x, "
+				"watchdog = %d, %s\n",
+				drive->name, sata_error, watchdog, __func__);
+		} else
+			watchdog = (ext_stat & 0x8000) ? 1 : 0;
+
+		ext_stat >>= 16;
+		if (!(ext_stat & 0x0404) && !watchdog)
+			return 0;
+	}
+
+	/* return 1 if INTR asserted */
+	if (readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)) & 4)
+		return 1;
+
+	/* return 1 if Device INTR asserted */
+	if (readb((void __iomem *)addr) & 8)
+		return 0;	/* return 1; */
+
+	return 0;
+}
+
+static int siimage_dma_test_irq(ide_drive_t *drive)
+{
+	if (drive->hwif->host_flags & IDE_HFLAG_MMIO)
+		return siimage_mmio_dma_test_irq(drive);
+	else
+		return siimage_io_dma_test_irq(drive);
+}
+
+/**
+ *	sil_sata_reset_poll	-	wait for SATA reset
+ *	@drive: drive we are resetting
+ *
+ *	Poll the SATA phy and see whether it has come back from the dead
+ *	yet.
+ */
+
+static int sil_sata_reset_poll(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	void __iomem *sata_status_addr
+		= (void __iomem *)hwif->sata_scr[SATA_STATUS_OFFSET];
+
+	if (sata_status_addr) {
+		/* SATA Status is available only when in MMIO mode */
+		u32 sata_stat = readl(sata_status_addr);
+
+		if ((sata_stat & 0x03) != 0x03) {
+			printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
+					    hwif->name, sata_stat);
+			return -ENXIO;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *	sil_sata_pre_reset	-	reset hook
+ *	@drive: IDE device being reset
+ *
+ *	For the SATA devices we need to handle recalibration/geometry
+ *	differently
+ */
+
+static void sil_sata_pre_reset(ide_drive_t *drive)
+{
+	if (drive->media == ide_disk) {
+		drive->special.b.set_geometry = 0;
+		drive->special.b.recalibrate = 0;
+	}
+}
+
+/**
+ *	init_chipset_siimage	-	set up an SI device
+ *	@dev: PCI device
+ *
+ *	Perform the initial PCI set up for this device. Attempt to switch
+ *	to 133 MHz clocking if the system isn't already set up to do it.
+ */
+
+static unsigned int init_chipset_siimage(struct pci_dev *dev)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	void __iomem *ioaddr = host->host_priv;
+	unsigned long base, scsc_addr;
+	u8 rev = dev->revision, tmp;
+
+	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255);
+
+	if (ioaddr)
+		pci_set_master(dev);
+
+	base = (unsigned long)ioaddr;
+
+	if (ioaddr && pdev_is_sata(dev)) {
+		u32 tmp32, irq_mask;
+
+		/* make sure IDE0/1 interrupts are not masked */
+		irq_mask = (1 << 22) | (1 << 23);
+		tmp32 = readl(ioaddr + 0x48);
+		if (tmp32 & irq_mask) {
+			tmp32 &= ~irq_mask;
+			writel(tmp32, ioaddr + 0x48);
+			readl(ioaddr + 0x48); /* flush */
+		}
+		writel(0, ioaddr + 0x148);
+		writel(0, ioaddr + 0x1C8);
+	}
+
+	sil_iowrite8(dev, 0, base ? (base + 0xB4) : 0x80);
+	sil_iowrite8(dev, 0, base ? (base + 0xF4) : 0x84);
+
+	scsc_addr = base ? (base + 0x4A) : 0x8A;
+	tmp = sil_ioread8(dev, scsc_addr);
+
+	switch (tmp & 0x30) {
+	case 0x00:
+		/* On 100 MHz clocking, try and switch to 133 MHz */
+		sil_iowrite8(dev, tmp | 0x10, scsc_addr);
+		break;
+	case 0x30:
+		/* Clocking is disabled, attempt to force 133MHz clocking. */
+		sil_iowrite8(dev, tmp & ~0x20, scsc_addr);
+	case 0x10:
+		/* On 133Mhz clocking. */
+		break;
+	case 0x20:
+		/* On PCIx2 clocking. */
+		break;
+	}
+
+	tmp = sil_ioread8(dev, scsc_addr);
+
+	sil_iowrite8 (dev,       0x72, base + 0xA1);
+	sil_iowrite16(dev,     0x328A, base + 0xA2);
+	sil_iowrite32(dev, 0x62DD62DD, base + 0xA4);
+	sil_iowrite32(dev, 0x43924392, base + 0xA8);
+	sil_iowrite32(dev, 0x40094009, base + 0xAC);
+	sil_iowrite8 (dev,       0x72, base ? (base + 0xE1) : 0xB1);
+	sil_iowrite16(dev,     0x328A, base ? (base + 0xE2) : 0xB2);
+	sil_iowrite32(dev, 0x62DD62DD, base ? (base + 0xE4) : 0xB4);
+	sil_iowrite32(dev, 0x43924392, base ? (base + 0xE8) : 0xB8);
+	sil_iowrite32(dev, 0x40094009, base ? (base + 0xEC) : 0xBC);
+
+	if (base && pdev_is_sata(dev)) {
+		writel(0xFFFF0000, ioaddr + 0x108);
+		writel(0xFFFF0000, ioaddr + 0x188);
+		writel(0x00680000, ioaddr + 0x148);
+		writel(0x00680000, ioaddr + 0x1C8);
+	}
+
+	/* report the clocking mode of the controller */
+	if (!pdev_is_sata(dev)) {
+		static const char *clk_str[] =
+			{ "== 100", "== 133", "== 2X PCI", "DISABLED!" };
+
+		tmp >>= 4;
+		printk(KERN_INFO DRV_NAME " %s: BASE CLOCK %s\n",
+			pci_name(dev), clk_str[tmp & 3]);
+	}
+
+	return 0;
+}
+
+/**
+ *	init_mmio_iops_siimage	-	set up the iops for MMIO
+ *	@hwif: interface to set up
+ *
+ *	The basic setup here is fairly simple, we can use standard MMIO
+ *	operations. However we do have to set the taskfile register offsets
+ *	by hand as there isn't a standard defined layout for them this time.
+ *
+ *	The hardware supports buffered taskfiles and also some rather nice
+ *	extended PRD tables. For better SI3112 support use the libata driver
+ */
+
+static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	struct ide_host *host	= pci_get_drvdata(dev);
+	void *addr		= host->host_priv;
+	u8 ch			= hwif->channel;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	unsigned long base;
+
+	/*
+	 *	Fill in the basic hwif bits
+	 */
+	hwif->host_flags |= IDE_HFLAG_MMIO;
+
+	hwif->hwif_data	= addr;
+
+	/*
+	 *	Now set up the hw. We have to do this ourselves as the
+	 *	MMIO layout isn't the same as the standard port based I/O.
+	 */
+	memset(io_ports, 0, sizeof(*io_ports));
+
+	base = (unsigned long)addr;
+	if (ch)
+		base += 0xC0;
+	else
+		base += 0x80;
+
+	/*
+	 *	The buffered task file doesn't have status/control, so we
+	 *	can't currently use it sanely since we want to use LBA48 mode.
+	 */
+	io_ports->data_addr	= base;
+	io_ports->error_addr	= base + 1;
+	io_ports->nsect_addr	= base + 2;
+	io_ports->lbal_addr	= base + 3;
+	io_ports->lbam_addr	= base + 4;
+	io_ports->lbah_addr	= base + 5;
+	io_ports->device_addr	= base + 6;
+	io_ports->status_addr	= base + 7;
+	io_ports->ctl_addr	= base + 10;
+
+	if (pdev_is_sata(dev)) {
+		base = (unsigned long)addr;
+		if (ch)
+			base += 0x80;
+		hwif->sata_scr[SATA_STATUS_OFFSET]	= base + 0x104;
+		hwif->sata_scr[SATA_ERROR_OFFSET]	= base + 0x108;
+		hwif->sata_scr[SATA_CONTROL_OFFSET]	= base + 0x100;
+	}
+
+	hwif->irq = dev->irq;
+
+	hwif->dma_base = (unsigned long)addr + (ch ? 0x08 : 0x00);
+}
+
+static int is_dev_seagate_sata(ide_drive_t *drive)
+{
+	const char *s	= (const char *)&drive->id[ATA_ID_PROD];
+	unsigned len	= strnlen(s, ATA_ID_PROD_LEN);
+
+	if ((len > 4) && (!memcmp(s, "ST", 2)))
+		if ((!memcmp(s + len - 2, "AS", 2)) ||
+		    (!memcmp(s + len - 3, "ASL", 3))) {
+			printk(KERN_INFO "%s: applying pessimistic Seagate "
+					 "errata fix\n", drive->name);
+			return 1;
+		}
+
+	return 0;
+}
+
+/**
+ *	sil_quirkproc		-	post probe fixups
+ *	@drive: drive
+ *
+ *	Called after drive probe we use this to decide whether the
+ *	Seagate fixup must be applied. This used to be in init_iops but
+ *	that can occur before we know what drives are present.
+ */
+
+static void sil_quirkproc(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+
+	/* Try and rise the rqsize */
+	if (!is_sata(hwif) || !is_dev_seagate_sata(drive))
+		hwif->rqsize = 128;
+}
+
+/**
+ *	init_iops_siimage	-	set up iops
+ *	@hwif: interface to set up
+ *
+ *	Do the basic setup for the SIIMAGE hardware interface
+ *	and then do the MMIO setup if we can. This is the first
+ *	look in we get for setting up the hwif so that we
+ *	can get the iops right before using them.
+ */
+
+static void __devinit init_iops_siimage(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	struct ide_host *host = pci_get_drvdata(dev);
+
+	hwif->hwif_data = NULL;
+
+	/* Pessimal until we finish probing */
+	hwif->rqsize = 15;
+
+	if (host->host_priv)
+		init_mmio_iops_siimage(hwif);
+}
+
+/**
+ *	sil_cable_detect	-	cable detection
+ *	@hwif: interface to check
+ *
+ *	Check for the presence of an ATA66 capable cable on the interface.
+ */
+
+static u8 sil_cable_detect(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	unsigned long addr	= siimage_selreg(hwif, 0);
+	u8 ata66		= sil_ioread8(dev, addr);
+
+	return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
+}
+
+static const struct ide_port_ops sil_pata_port_ops = {
+	.set_pio_mode		= sil_set_pio_mode,
+	.set_dma_mode		= sil_set_dma_mode,
+	.quirkproc		= sil_quirkproc,
+	.udma_filter		= sil_pata_udma_filter,
+	.cable_detect		= sil_cable_detect,
+};
+
+static const struct ide_port_ops sil_sata_port_ops = {
+	.set_pio_mode		= sil_set_pio_mode,
+	.set_dma_mode		= sil_set_dma_mode,
+	.reset_poll		= sil_sata_reset_poll,
+	.pre_reset		= sil_sata_pre_reset,
+	.quirkproc		= sil_quirkproc,
+	.udma_filter		= sil_sata_udma_filter,
+	.cable_detect		= sil_cable_detect,
+};
+
+static const struct ide_dma_ops sil_dma_ops = {
+	.dma_host_set		= ide_dma_host_set,
+	.dma_setup		= ide_dma_setup,
+	.dma_exec_cmd		= ide_dma_exec_cmd,
+	.dma_start		= ide_dma_start,
+	.dma_end		= ide_dma_end,
+	.dma_test_irq		= siimage_dma_test_irq,
+	.dma_timeout		= ide_dma_timeout,
+	.dma_lost_irq		= ide_dma_lost_irq,
+};
+
+#define DECLARE_SII_DEV(p_ops)				\
+	{						\
+		.name		= DRV_NAME,		\
+		.init_chipset	= init_chipset_siimage,	\
+		.init_iops	= init_iops_siimage,	\
+		.port_ops	= p_ops,		\
+		.dma_ops	= &sil_dma_ops,		\
+		.pio_mask	= ATA_PIO4,		\
+		.mwdma_mask	= ATA_MWDMA2,		\
+		.udma_mask	= ATA_UDMA6,		\
+	}
+
+static const struct ide_port_info siimage_chipsets[] __devinitdata = {
+	/* 0: SiI680 */  DECLARE_SII_DEV(&sil_pata_port_ops),
+	/* 1: SiI3112 */ DECLARE_SII_DEV(&sil_sata_port_ops)
+};
+
+/**
+ *	siimage_init_one	-	PCI layer discovery entry
+ *	@dev: PCI device
+ *	@id: ident table entry
+ *
+ *	Called by the PCI code when it finds an SiI680 or SiI3112 controller.
+ *	We then use the IDE PCI generic helper to do most of the work.
+ */
+
+static int __devinit siimage_init_one(struct pci_dev *dev,
+				      const struct pci_device_id *id)
+{
+	void __iomem *ioaddr = NULL;
+	resource_size_t bar5 = pci_resource_start(dev, 5);
+	unsigned long barsize = pci_resource_len(dev, 5);
+	int rc;
+	struct ide_port_info d;
+	u8 idx = id->driver_data;
+	u8 BA5_EN;
+
+	d = siimage_chipsets[idx];
+
+	if (idx) {
+		static int first = 1;
+
+		if (first) {
+			printk(KERN_INFO DRV_NAME ": For full SATA support you "
+				"should use the libata sata_sil module.\n");
+			first = 0;
+		}
+
+		d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
+	}
+
+	rc = pci_enable_device(dev);
+	if (rc)
+		return rc;
+
+	pci_read_config_byte(dev, 0x8A, &BA5_EN);
+	if ((BA5_EN & 0x01) || bar5) {
+		/*
+		* Drop back to PIO if we can't map the MMIO. Some systems
+		* seem to get terminally confused in the PCI spaces.
+		*/
+		if (!request_mem_region(bar5, barsize, d.name)) {
+			printk(KERN_WARNING DRV_NAME " %s: MMIO ports not "
+				"available\n", pci_name(dev));
+		} else {
+			ioaddr = pci_ioremap_bar(dev, 5);
+			if (ioaddr == NULL)
+				release_mem_region(bar5, barsize);
+		}
+	}
+
+	rc = ide_pci_init_one(dev, &d, ioaddr);
+	if (rc) {
+		if (ioaddr) {
+			iounmap(ioaddr);
+			release_mem_region(bar5, barsize);
+		}
+		pci_disable_device(dev);
+	}
+
+	return rc;
+}
+
+static void __devexit siimage_remove(struct pci_dev *dev)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	void __iomem *ioaddr = host->host_priv;
+
+	ide_pci_remove(dev);
+
+	if (ioaddr) {
+		resource_size_t bar5 = pci_resource_start(dev, 5);
+		unsigned long barsize = pci_resource_len(dev, 5);
+
+		iounmap(ioaddr);
+		release_mem_region(bar5, barsize);
+	}
+
+	pci_disable_device(dev);
+}
+
+static const struct pci_device_id siimage_pci_tbl[] = {
+	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680),    0 },
+#ifdef CONFIG_BLK_DEV_IDE_SATA
+	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_3112),   1 },
+	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_1210SA), 1 },
+#endif
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, siimage_pci_tbl);
+
+static struct pci_driver siimage_pci_driver = {
+	.name		= "SiI_IDE",
+	.id_table	= siimage_pci_tbl,
+	.probe		= siimage_init_one,
+	.remove		= __devexit_p(siimage_remove),
+	.suspend	= ide_pci_suspend,
+	.resume		= ide_pci_resume,
+};
+
+static int __init siimage_ide_init(void)
+{
+	return ide_pci_register_driver(&siimage_pci_driver);
+}
+
+static void __exit siimage_ide_exit(void)
+{
+	pci_unregister_driver(&siimage_pci_driver);
+}
+
+module_init(siimage_ide_init);
+module_exit(siimage_ide_exit);
+
+MODULE_AUTHOR("Andre Hedrick, Alan Cox");
+MODULE_DESCRIPTION("PCI driver module for SiI IDE");
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/sis5513.c
similarity index 100%
rename from drivers/ide/pci/sis5513.c
rename to drivers/ide/sis5513.c
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/sl82c105.c
similarity index 100%
rename from drivers/ide/pci/sl82c105.c
rename to drivers/ide/sl82c105.c
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/slc90e66.c
similarity index 100%
rename from drivers/ide/pci/slc90e66.c
rename to drivers/ide/slc90e66.c
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/tc86c001.c
similarity index 100%
rename from drivers/ide/pci/tc86c001.c
rename to drivers/ide/tc86c001.c
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/triflex.c
similarity index 100%
rename from drivers/ide/pci/triflex.c
rename to drivers/ide/triflex.c
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/trm290.c
similarity index 100%
rename from drivers/ide/pci/trm290.c
rename to drivers/ide/trm290.c
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
new file mode 100644
index 0000000..fa660f9
--- /dev/null
+++ b/drivers/ide/tx4938ide.c
@@ -0,0 +1,310 @@
+/*
+ * TX4938 internal IDE driver
+ * Based on tx4939ide.c.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * (C) Copyright TOSHIBA CORPORATION 2005-2007
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <asm/txx9/tx4938.h>
+
+static void tx4938ide_tune_ebusc(unsigned int ebus_ch,
+				 unsigned int gbus_clock,
+				 u8 pio)
+{
+	struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
+	u64 cr = __raw_readq(&tx4938_ebuscptr->cr[ebus_ch]);
+	unsigned int sp = (cr >> 4) & 3;
+	unsigned int clock = gbus_clock / (4 - sp);
+	unsigned int cycle = 1000000000 / clock;
+	unsigned int wt, shwt;
+
+	/* Minimum DIOx- active time */
+	wt = DIV_ROUND_UP(t->act8b, cycle) - 2;
+	/* IORDY setup time: 35ns */
+	wt = max(wt, DIV_ROUND_UP(35, cycle));
+	/* actual wait-cycle is max(wt & ~1, 1) */
+	if (wt > 2 && (wt & 1))
+		wt++;
+	wt &= ~1;
+	/* Address-valid to DIOR/DIOW setup */
+	shwt = DIV_ROUND_UP(t->setup, cycle);
+
+	pr_debug("tx4938ide: ebus %d, bus cycle %dns, WT %d, SHWT %d\n",
+		 ebus_ch, cycle, wt, shwt);
+
+	__raw_writeq((cr & ~(0x3f007ull)) | (wt << 12) | shwt,
+		     &tx4938_ebuscptr->cr[ebus_ch]);
+}
+
+static void tx4938ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct tx4938ide_platform_info *pdata = hwif->dev->platform_data;
+	u8 safe = pio;
+	ide_drive_t *pair;
+
+	pair = ide_get_pair_dev(drive);
+	if (pair)
+		safe = min(safe, ide_get_best_pio_mode(pair, 255, 5));
+	tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, safe);
+}
+
+#ifdef __BIG_ENDIAN
+
+/* custom iops (independent from SWAP_IO_SPACE) */
+static u8 tx4938ide_inb(unsigned long port)
+{
+	return __raw_readb((void __iomem *)port);
+}
+
+static void tx4938ide_outb(u8 value, unsigned long port)
+{
+	__raw_writeb(value, (void __iomem *)port);
+}
+
+static void tx4938ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+	u8 HIHI = task->tf_flags & IDE_TFLAG_LBA48 ? 0xE0 : 0xEF;
+
+	if (task->tf_flags & IDE_TFLAG_FLAGGED)
+		HIHI = 0xFF;
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DATA) {
+		u16 data = (tf->hob_data << 8) | tf->data;
+
+		/* no endian swap */
+		__raw_writew(data, (void __iomem *)io_ports->data_addr);
+	}
+
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+		tx4938ide_outb(tf->hob_feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+		tx4938ide_outb(tf->hob_nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+		tx4938ide_outb(tf->hob_lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+		tx4938ide_outb(tf->hob_lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+		tx4938ide_outb(tf->hob_lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+		tx4938ide_outb(tf->feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+		tx4938ide_outb(tf->nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+		tx4938ide_outb(tf->lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+		tx4938ide_outb(tf->lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+		tx4938ide_outb(tf->lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+		tx4938ide_outb((tf->device & HIHI) | drive->select,
+			       io_ports->device_addr);
+}
+
+static void tx4938ide_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+
+	if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+		u16 data;
+
+		/* no endian swap */
+		data = __raw_readw((void __iomem *)io_ports->data_addr);
+		tf->data = data & 0xff;
+		tf->hob_data = (data >> 8) & 0xff;
+	}
+
+	/* be sure we're looking at the low order bits */
+	tx4938ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
+
+	if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+		tf->feature = tx4938ide_inb(io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+		tf->nsect  = tx4938ide_inb(io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+		tf->lbal   = tx4938ide_inb(io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+		tf->lbam   = tx4938ide_inb(io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+		tf->lbah   = tx4938ide_inb(io_ports->lbah_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+		tf->device = tx4938ide_inb(io_ports->device_addr);
+
+	if (task->tf_flags & IDE_TFLAG_LBA48) {
+		tx4938ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
+
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+			tf->hob_feature =
+				tx4938ide_inb(io_ports->feature_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+			tf->hob_nsect   = tx4938ide_inb(io_ports->nsect_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+			tf->hob_lbal    = tx4938ide_inb(io_ports->lbal_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+			tf->hob_lbam    = tx4938ide_inb(io_ports->lbam_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+			tf->hob_lbah    = tx4938ide_inb(io_ports->lbah_addr);
+	}
+}
+
+static void tx4938ide_input_data_swap(ide_drive_t *drive, struct request *rq,
+				void *buf, unsigned int len)
+{
+	unsigned long port = drive->hwif->io_ports.data_addr;
+	unsigned short *ptr = buf;
+	unsigned int count = (len + 1) / 2;
+
+	while (count--)
+		*ptr++ = cpu_to_le16(__raw_readw((void __iomem *)port));
+	__ide_flush_dcache_range((unsigned long)buf, count * 2);
+}
+
+static void tx4938ide_output_data_swap(ide_drive_t *drive, struct request *rq,
+				void *buf, unsigned int len)
+{
+	unsigned long port = drive->hwif->io_ports.data_addr;
+	unsigned short *ptr = buf;
+	unsigned int count = (len + 1) / 2;
+
+	while (count--) {
+		__raw_writew(le16_to_cpu(*ptr), (void __iomem *)port);
+		ptr++;
+	}
+	__ide_flush_dcache_range((unsigned long)buf, count * 2);
+}
+
+static const struct ide_tp_ops tx4938ide_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= ide_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.read_sff_dma_status	= ide_read_sff_dma_status,
+
+	.set_irq		= ide_set_irq,
+
+	.tf_load		= tx4938ide_tf_load,
+	.tf_read		= tx4938ide_tf_read,
+
+	.input_data		= tx4938ide_input_data_swap,
+	.output_data		= tx4938ide_output_data_swap,
+};
+
+#endif	/* __BIG_ENDIAN */
+
+static const struct ide_port_ops tx4938ide_port_ops = {
+	.set_pio_mode = tx4938ide_set_pio_mode,
+};
+
+static const struct ide_port_info tx4938ide_port_info __initdata = {
+	.port_ops = &tx4938ide_port_ops,
+#ifdef __BIG_ENDIAN
+	.tp_ops = &tx4938ide_tp_ops,
+#endif
+	.host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
+	.pio_mask = ATA_PIO5,
+};
+
+static int __init tx4938ide_probe(struct platform_device *pdev)
+{
+	hw_regs_t hw;
+	hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_host *host;
+	struct resource *res;
+	struct tx4938ide_platform_info *pdata = pdev->dev.platform_data;
+	int irq, ret, i;
+	unsigned long mapbase;
+	struct ide_port_info d = tx4938ide_port_info;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENODEV;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	if (!devm_request_mem_region(&pdev->dev, res->start,
+				     res->end - res->start + 1, "tx4938ide"))
+		return -EBUSY;
+	mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start,
+					      res->end - res->start + 1);
+	if (!mapbase)
+		return -EBUSY;
+
+	memset(&hw, 0, sizeof(hw));
+	if (pdata->ioport_shift) {
+		unsigned long port = mapbase;
+
+		hw.io_ports_array[0] = port;
+#ifdef __BIG_ENDIAN
+		port++;
+#endif
+		for (i = 1; i <= 7; i++)
+			hw.io_ports_array[i] =
+				port + (i << pdata->ioport_shift);
+		hw.io_ports.ctl_addr =
+			port + 0x10000 + (6 << pdata->ioport_shift);
+	} else
+		ide_std_init_ports(&hw, mapbase, mapbase + 0x10006);
+	hw.irq = irq;
+	hw.dev = &pdev->dev;
+
+	pr_info("TX4938 IDE interface (base %#lx, irq %d)\n", mapbase, hw.irq);
+	if (pdata->gbus_clock)
+		tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, 0);
+	else
+		d.port_ops = NULL;
+	ret = ide_host_add(&d, hws, &host);
+	if (ret)
+		return ret;
+	platform_set_drvdata(pdev, host);
+	return 0;
+}
+
+static int __exit tx4938ide_remove(struct platform_device *pdev)
+{
+	struct ide_host *host = platform_get_drvdata(pdev);
+
+	ide_host_remove(host);
+	return 0;
+}
+
+static struct platform_driver tx4938ide_driver = {
+	.driver		= {
+		.name	= "tx4938ide",
+		.owner	= THIS_MODULE,
+	},
+	.remove = __exit_p(tx4938ide_remove),
+};
+
+static int __init tx4938ide_init(void)
+{
+	return platform_driver_probe(&tx4938ide_driver, tx4938ide_probe);
+}
+
+static void __exit tx4938ide_exit(void)
+{
+	platform_driver_unregister(&tx4938ide_driver);
+}
+
+module_init(tx4938ide_init);
+module_exit(tx4938ide_exit);
+
+MODULE_DESCRIPTION("TX4938 internal IDE driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:tx4938ide");
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
new file mode 100644
index 0000000..bafb7d1
--- /dev/null
+++ b/drivers/ide/tx4939ide.c
@@ -0,0 +1,754 @@
+/*
+ * TX4939 internal IDE driver
+ * Based on RBTX49xx patch from CELF patch archive.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * (C) Copyright TOSHIBA CORPORATION 2005-2007
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/scatterlist.h>
+
+#define MODNAME	"tx4939ide"
+
+/* ATA Shadow Registers (8-bit except for Data which is 16-bit) */
+#define TX4939IDE_Data			0x000
+#define TX4939IDE_Error_Feature		0x001
+#define TX4939IDE_Sec			0x002
+#define TX4939IDE_LBA0			0x003
+#define TX4939IDE_LBA1			0x004
+#define TX4939IDE_LBA2			0x005
+#define TX4939IDE_DevHead		0x006
+#define TX4939IDE_Stat_Cmd		0x007
+#define TX4939IDE_AltStat_DevCtl	0x402
+/* H/W DMA Registers  */
+#define TX4939IDE_DMA_Cmd	0x800	/* 8-bit */
+#define TX4939IDE_DMA_Stat	0x802	/* 8-bit */
+#define TX4939IDE_PRD_Ptr	0x804	/* 32-bit */
+/* ATA100 CORE Registers (16-bit) */
+#define TX4939IDE_Sys_Ctl	0xc00
+#define TX4939IDE_Xfer_Cnt_1	0xc08
+#define TX4939IDE_Xfer_Cnt_2	0xc0a
+#define TX4939IDE_Sec_Cnt	0xc10
+#define TX4939IDE_Start_Lo_Addr	0xc18
+#define TX4939IDE_Start_Up_Addr	0xc20
+#define TX4939IDE_Add_Ctl	0xc28
+#define TX4939IDE_Lo_Burst_Cnt	0xc30
+#define TX4939IDE_Up_Burst_Cnt	0xc38
+#define TX4939IDE_PIO_Addr	0xc88
+#define TX4939IDE_H_Rst_Tim	0xc90
+#define TX4939IDE_Int_Ctl	0xc98
+#define TX4939IDE_Pkt_Cmd	0xcb8
+#define TX4939IDE_Bxfer_Cnt_Hi	0xcc0
+#define TX4939IDE_Bxfer_Cnt_Lo	0xcc8
+#define TX4939IDE_Dev_TErr	0xcd0
+#define TX4939IDE_Pkt_Xfer_Ctl	0xcd8
+#define TX4939IDE_Start_TAddr	0xce0
+
+/* bits for Int_Ctl */
+#define TX4939IDE_INT_ADDRERR	0x80
+#define TX4939IDE_INT_REACHMUL	0x40
+#define TX4939IDE_INT_DEVTIMING	0x20
+#define TX4939IDE_INT_UDMATERM	0x10
+#define TX4939IDE_INT_TIMER	0x08
+#define TX4939IDE_INT_BUSERR	0x04
+#define TX4939IDE_INT_XFEREND	0x02
+#define TX4939IDE_INT_HOST	0x01
+
+#define TX4939IDE_IGNORE_INTS	\
+	(TX4939IDE_INT_ADDRERR | TX4939IDE_INT_REACHMUL | \
+	 TX4939IDE_INT_DEVTIMING | TX4939IDE_INT_UDMATERM | \
+	 TX4939IDE_INT_TIMER | TX4939IDE_INT_XFEREND)
+
+#ifdef __BIG_ENDIAN
+#define tx4939ide_swizzlel(a)	((a) ^ 4)
+#define tx4939ide_swizzlew(a)	((a) ^ 6)
+#define tx4939ide_swizzleb(a)	((a) ^ 7)
+#else
+#define tx4939ide_swizzlel(a)	(a)
+#define tx4939ide_swizzlew(a)	(a)
+#define tx4939ide_swizzleb(a)	(a)
+#endif
+
+static u16 tx4939ide_readw(void __iomem *base, u32 reg)
+{
+	return __raw_readw(base + tx4939ide_swizzlew(reg));
+}
+static u8 tx4939ide_readb(void __iomem *base, u32 reg)
+{
+	return __raw_readb(base + tx4939ide_swizzleb(reg));
+}
+static void tx4939ide_writel(u32 val, void __iomem *base, u32 reg)
+{
+	__raw_writel(val, base + tx4939ide_swizzlel(reg));
+}
+static void tx4939ide_writew(u16 val, void __iomem *base, u32 reg)
+{
+	__raw_writew(val, base + tx4939ide_swizzlew(reg));
+}
+static void tx4939ide_writeb(u8 val, void __iomem *base, u32 reg)
+{
+	__raw_writeb(val, base + tx4939ide_swizzleb(reg));
+}
+
+#define TX4939IDE_BASE(hwif)	((void __iomem *)(hwif)->extra_base)
+
+static void tx4939ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	int is_slave = drive->dn;
+	u32 mask, val;
+	u8 safe = pio;
+	ide_drive_t *pair;
+
+	pair = ide_get_pair_dev(drive);
+	if (pair)
+		safe = min(safe, ide_get_best_pio_mode(pair, 255, 4));
+	/*
+	 * Update Command Transfer Mode for master/slave and Data
+	 * Transfer Mode for this drive.
+	 */
+	mask = is_slave ? 0x07f00000 : 0x000007f0;
+	val = ((safe << 8) | (pio << 4)) << (is_slave ? 16 : 0);
+	hwif->select_data = (hwif->select_data & ~mask) | val;
+	/* tx4939ide_tf_load_fixup() will set the Sys_Ctl register */
+}
+
+static void tx4939ide_set_dma_mode(ide_drive_t *drive, const u8 mode)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	u32 mask, val;
+
+	/* Update Data Transfer Mode for this drive. */
+	if (mode >= XFER_UDMA_0)
+		val = mode - XFER_UDMA_0 + 8;
+	else
+		val = mode - XFER_MW_DMA_0 + 5;
+	if (drive->dn) {
+		mask = 0x00f00000;
+		val <<= 20;
+	} else {
+		mask = 0x000000f0;
+		val <<= 4;
+	}
+	hwif->select_data = (hwif->select_data & ~mask) | val;
+	/* tx4939ide_tf_load_fixup() will set the Sys_Ctl register */
+}
+
+static u16 tx4939ide_check_error_ints(ide_hwif_t *hwif)
+{
+	void __iomem *base = TX4939IDE_BASE(hwif);
+	u16 ctl = tx4939ide_readw(base, TX4939IDE_Int_Ctl);
+
+	if (ctl & TX4939IDE_INT_BUSERR) {
+		/* reset FIFO */
+		u16 sysctl = tx4939ide_readw(base, TX4939IDE_Sys_Ctl);
+
+		tx4939ide_writew(sysctl | 0x4000, base, TX4939IDE_Sys_Ctl);
+		mmiowb();
+		/* wait 12GBUSCLK (typ. 60ns @ GBUS200MHz, max 270ns) */
+		ndelay(270);
+		tx4939ide_writew(sysctl, base, TX4939IDE_Sys_Ctl);
+	}
+	if (ctl & (TX4939IDE_INT_ADDRERR |
+		   TX4939IDE_INT_DEVTIMING | TX4939IDE_INT_BUSERR))
+		pr_err("%s: Error interrupt %#x (%s%s%s )\n",
+		       hwif->name, ctl,
+		       ctl & TX4939IDE_INT_ADDRERR ? " Address-Error" : "",
+		       ctl & TX4939IDE_INT_DEVTIMING ? " DEV-Timing" : "",
+		       ctl & TX4939IDE_INT_BUSERR ? " Bus-Error" : "");
+	return ctl;
+}
+
+static void tx4939ide_clear_irq(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif;
+	void __iomem *base;
+	u16 ctl;
+
+	/*
+	 * tx4939ide_dma_test_irq() and tx4939ide_dma_end() do all job
+	 * for DMA case.
+	 */
+	if (drive->waiting_for_dma)
+		return;
+	hwif = drive->hwif;
+	base = TX4939IDE_BASE(hwif);
+	ctl = tx4939ide_check_error_ints(hwif);
+	tx4939ide_writew(ctl, base, TX4939IDE_Int_Ctl);
+}
+
+static u8 tx4939ide_cable_detect(ide_hwif_t *hwif)
+{
+	void __iomem *base = TX4939IDE_BASE(hwif);
+
+	return tx4939ide_readw(base, TX4939IDE_Sys_Ctl) & 0x2000 ?
+		ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
+#ifdef __BIG_ENDIAN
+static void tx4939ide_dma_host_set(ide_drive_t *drive, int on)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	u8 unit = drive->dn;
+	void __iomem *base = TX4939IDE_BASE(hwif);
+	u8 dma_stat = tx4939ide_readb(base, TX4939IDE_DMA_Stat);
+
+	if (on)
+		dma_stat |= (1 << (5 + unit));
+	else
+		dma_stat &= ~(1 << (5 + unit));
+
+	tx4939ide_writeb(dma_stat, base, TX4939IDE_DMA_Stat);
+}
+#else
+#define tx4939ide_dma_host_set	ide_dma_host_set
+#endif
+
+static u8 tx4939ide_clear_dma_status(void __iomem *base)
+{
+	u8 dma_stat;
+
+	/* read DMA status for INTR & ERROR flags */
+	dma_stat = tx4939ide_readb(base, TX4939IDE_DMA_Stat);
+	/* clear INTR & ERROR flags */
+	tx4939ide_writeb(dma_stat | ATA_DMA_INTR | ATA_DMA_ERR, base,
+			 TX4939IDE_DMA_Stat);
+	/* recover intmask cleared by writing to bit2 of DMA_Stat */
+	tx4939ide_writew(TX4939IDE_IGNORE_INTS << 8, base, TX4939IDE_Int_Ctl);
+	return dma_stat;
+}
+
+#ifdef __BIG_ENDIAN
+/* custom ide_build_dmatable to handle swapped layout */
+static int tx4939ide_build_dmatable(ide_drive_t *drive, struct request *rq)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	u32 *table = (u32 *)hwif->dmatable_cpu;
+	unsigned int count = 0;
+	int i;
+	struct scatterlist *sg;
+
+	hwif->sg_nents = ide_build_sglist(drive, rq);
+	if (hwif->sg_nents == 0)
+		return 0;
+
+	for_each_sg(hwif->sg_table, sg, hwif->sg_nents, i) {
+		u32 cur_addr, cur_len, bcount;
+
+		cur_addr = sg_dma_address(sg);
+		cur_len = sg_dma_len(sg);
+
+		/*
+		 * Fill in the DMA table, without crossing any 64kB boundaries.
+		 */
+
+		while (cur_len) {
+			if (count++ >= PRD_ENTRIES)
+				goto use_pio_instead;
+
+			bcount = 0x10000 - (cur_addr & 0xffff);
+			if (bcount > cur_len)
+				bcount = cur_len;
+			*table++ = bcount & 0xffff;
+			*table++ = cur_addr;
+			cur_addr += bcount;
+			cur_len -= bcount;
+		}
+	}
+
+	if (count) {
+		*(table - 2) |= 0x80000000;
+		return count;
+	}
+
+use_pio_instead:
+	printk(KERN_ERR "%s: %s\n", drive->name,
+		count ? "DMA table too small" : "empty DMA table?");
+
+	ide_destroy_dmatable(drive);
+
+	return 0; /* revert to PIO for this request */
+}
+#else
+#define tx4939ide_build_dmatable	ide_build_dmatable
+#endif
+
+static int tx4939ide_dma_setup(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	void __iomem *base = TX4939IDE_BASE(hwif);
+	struct request *rq = hwif->hwgroup->rq;
+	u8 reading;
+	int nent;
+
+	if (rq_data_dir(rq))
+		reading = 0;
+	else
+		reading = ATA_DMA_WR;
+
+	/* fall back to PIO! */
+	nent = tx4939ide_build_dmatable(drive, rq);
+	if (!nent) {
+		ide_map_sg(drive, rq);
+		return 1;
+	}
+
+	/* PRD table */
+	tx4939ide_writel(hwif->dmatable_dma, base, TX4939IDE_PRD_Ptr);
+
+	/* specify r/w */
+	tx4939ide_writeb(reading, base, TX4939IDE_DMA_Cmd);
+
+	/* clear INTR & ERROR flags */
+	tx4939ide_clear_dma_status(base);
+
+	drive->waiting_for_dma = 1;
+
+	tx4939ide_writew(SECTOR_SIZE / 2, base, drive->dn ?
+			 TX4939IDE_Xfer_Cnt_2 : TX4939IDE_Xfer_Cnt_1);
+	tx4939ide_writew(rq->nr_sectors, base, TX4939IDE_Sec_Cnt);
+	return 0;
+}
+
+static int tx4939ide_dma_end(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	u8 dma_stat, dma_cmd;
+	void __iomem *base = TX4939IDE_BASE(hwif);
+	u16 ctl = tx4939ide_readw(base, TX4939IDE_Int_Ctl);
+
+	drive->waiting_for_dma = 0;
+
+	/* get DMA command mode */
+	dma_cmd = tx4939ide_readb(base, TX4939IDE_DMA_Cmd);
+	/* stop DMA */
+	tx4939ide_writeb(dma_cmd & ~ATA_DMA_START, base, TX4939IDE_DMA_Cmd);
+
+	/* read and clear the INTR & ERROR bits */
+	dma_stat = tx4939ide_clear_dma_status(base);
+
+	/* purge DMA mappings */
+	ide_destroy_dmatable(drive);
+	/* verify good DMA status */
+	wmb();
+
+	if ((dma_stat & (ATA_DMA_INTR | ATA_DMA_ERR | ATA_DMA_ACTIVE)) == 0 &&
+	    (ctl & (TX4939IDE_INT_XFEREND | TX4939IDE_INT_HOST)) ==
+	    (TX4939IDE_INT_XFEREND | TX4939IDE_INT_HOST))
+		/* INT_IDE lost... bug? */
+		return 0;
+	return ((dma_stat & (ATA_DMA_INTR | ATA_DMA_ERR | ATA_DMA_ACTIVE)) !=
+		ATA_DMA_INTR) ? 0x10 | dma_stat : 0;
+}
+
+/* returns 1 if DMA IRQ issued, 0 otherwise */
+static int tx4939ide_dma_test_irq(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	void __iomem *base = TX4939IDE_BASE(hwif);
+	u16 ctl, ide_int;
+	u8 dma_stat, stat;
+	int found = 0;
+
+	ctl = tx4939ide_check_error_ints(hwif);
+	ide_int = ctl & (TX4939IDE_INT_XFEREND | TX4939IDE_INT_HOST);
+	switch (ide_int) {
+	case TX4939IDE_INT_HOST:
+		/* On error, XFEREND might not be asserted. */
+		stat = tx4939ide_readb(base, TX4939IDE_AltStat_DevCtl);
+		if ((stat & (ATA_BUSY | ATA_DRQ | ATA_ERR)) == ATA_ERR)
+			found = 1;
+		else
+			/* Wait for XFEREND (Mask HOST and unmask XFEREND) */
+			ctl &= ~TX4939IDE_INT_XFEREND << 8;
+		ctl |= ide_int << 8;
+		break;
+	case TX4939IDE_INT_HOST | TX4939IDE_INT_XFEREND:
+		dma_stat = tx4939ide_readb(base, TX4939IDE_DMA_Stat);
+		if (!(dma_stat & ATA_DMA_INTR))
+			pr_warning("%s: weird interrupt status. "
+				   "DMA_Stat %#02x int_ctl %#04x\n",
+				   hwif->name, dma_stat, ctl);
+		found = 1;
+		break;
+	}
+	/*
+	 * Do not clear XFEREND, HOST now.  They will be cleared by
+	 * clearing bit2 of DMA_Stat.
+	 */
+	ctl &= ~ide_int;
+	tx4939ide_writew(ctl, base, TX4939IDE_Int_Ctl);
+	return found;
+}
+
+static void tx4939ide_init_hwif(ide_hwif_t *hwif)
+{
+	void __iomem *base = TX4939IDE_BASE(hwif);
+
+	/* Soft Reset */
+	tx4939ide_writew(0x8000, base, TX4939IDE_Sys_Ctl);
+	mmiowb();
+	/* at least 20 GBUSCLK (typ. 100ns @ GBUS200MHz, max 450ns) */
+	ndelay(450);
+	tx4939ide_writew(0x0000, base, TX4939IDE_Sys_Ctl);
+	/* mask some interrupts and clear all interrupts */
+	tx4939ide_writew((TX4939IDE_IGNORE_INTS << 8) | 0xff, base,
+			 TX4939IDE_Int_Ctl);
+
+	tx4939ide_writew(0x0008, base, TX4939IDE_Lo_Burst_Cnt);
+	tx4939ide_writew(0, base, TX4939IDE_Up_Burst_Cnt);
+}
+
+static int tx4939ide_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
+{
+	hwif->dma_base =
+		hwif->extra_base + tx4939ide_swizzleb(TX4939IDE_DMA_Cmd);
+	/*
+	 * Note that we cannot use ATA_DMA_TABLE_OFS, ATA_DMA_STATUS
+	 * for big endian.
+	 */
+	return ide_allocate_dma_engine(hwif);
+}
+
+static void tx4939ide_tf_load_fixup(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	void __iomem *base = TX4939IDE_BASE(hwif);
+	u16 sysctl = hwif->select_data >> (drive->dn ? 16 : 0);
+
+	/*
+	 * Fix ATA100 CORE System Control Register. (The write to the
+	 * Device/Head register may write wrong data to the System
+	 * Control Register)
+	 * While Sys_Ctl is written here, selectproc is not needed.
+	 */
+	tx4939ide_writew(sysctl, base, TX4939IDE_Sys_Ctl);
+}
+
+#ifdef __BIG_ENDIAN
+
+static u8 tx4939ide_read_sff_dma_status(ide_hwif_t *hwif)
+{
+	void __iomem *base = TX4939IDE_BASE(hwif);
+
+	return tx4939ide_readb(base, TX4939IDE_DMA_Stat);
+}
+
+/* custom iops (independent from SWAP_IO_SPACE) */
+static u8 tx4939ide_inb(unsigned long port)
+{
+	return __raw_readb((void __iomem *)port);
+}
+
+static void tx4939ide_outb(u8 value, unsigned long port)
+{
+	__raw_writeb(value, (void __iomem *)port);
+}
+
+static void tx4939ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+	u8 HIHI = task->tf_flags & IDE_TFLAG_LBA48 ? 0xE0 : 0xEF;
+
+	if (task->tf_flags & IDE_TFLAG_FLAGGED)
+		HIHI = 0xFF;
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DATA) {
+		u16 data = (tf->hob_data << 8) | tf->data;
+
+		/* no endian swap */
+		__raw_writew(data, (void __iomem *)io_ports->data_addr);
+	}
+
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+		tx4939ide_outb(tf->hob_feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+		tx4939ide_outb(tf->hob_nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+		tx4939ide_outb(tf->hob_lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+		tx4939ide_outb(tf->hob_lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+		tx4939ide_outb(tf->hob_lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+		tx4939ide_outb(tf->feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+		tx4939ide_outb(tf->nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+		tx4939ide_outb(tf->lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+		tx4939ide_outb(tf->lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+		tx4939ide_outb(tf->lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) {
+		tx4939ide_outb((tf->device & HIHI) | drive->select,
+			       io_ports->device_addr);
+		tx4939ide_tf_load_fixup(drive, task);
+	}
+}
+
+static void tx4939ide_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+
+	if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+		u16 data;
+
+		/* no endian swap */
+		data = __raw_readw((void __iomem *)io_ports->data_addr);
+		tf->data = data & 0xff;
+		tf->hob_data = (data >> 8) & 0xff;
+	}
+
+	/* be sure we're looking at the low order bits */
+	tx4939ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
+
+	if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+		tf->feature = tx4939ide_inb(io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+		tf->nsect  = tx4939ide_inb(io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+		tf->lbal   = tx4939ide_inb(io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+		tf->lbam   = tx4939ide_inb(io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+		tf->lbah   = tx4939ide_inb(io_ports->lbah_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+		tf->device = tx4939ide_inb(io_ports->device_addr);
+
+	if (task->tf_flags & IDE_TFLAG_LBA48) {
+		tx4939ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
+
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+			tf->hob_feature =
+				tx4939ide_inb(io_ports->feature_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+			tf->hob_nsect   = tx4939ide_inb(io_ports->nsect_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+			tf->hob_lbal    = tx4939ide_inb(io_ports->lbal_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+			tf->hob_lbam    = tx4939ide_inb(io_ports->lbam_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+			tf->hob_lbah    = tx4939ide_inb(io_ports->lbah_addr);
+	}
+}
+
+static void tx4939ide_input_data_swap(ide_drive_t *drive, struct request *rq,
+				void *buf, unsigned int len)
+{
+	unsigned long port = drive->hwif->io_ports.data_addr;
+	unsigned short *ptr = buf;
+	unsigned int count = (len + 1) / 2;
+
+	while (count--)
+		*ptr++ = cpu_to_le16(__raw_readw((void __iomem *)port));
+	__ide_flush_dcache_range((unsigned long)buf, count * 2);
+}
+
+static void tx4939ide_output_data_swap(ide_drive_t *drive, struct request *rq,
+				void *buf, unsigned int len)
+{
+	unsigned long port = drive->hwif->io_ports.data_addr;
+	unsigned short *ptr = buf;
+	unsigned int count = (len + 1) / 2;
+
+	while (count--) {
+		__raw_writew(le16_to_cpu(*ptr), (void __iomem *)port);
+		ptr++;
+	}
+	__ide_flush_dcache_range((unsigned long)buf, count * 2);
+}
+
+static const struct ide_tp_ops tx4939ide_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= ide_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.read_sff_dma_status	= tx4939ide_read_sff_dma_status,
+
+	.set_irq		= ide_set_irq,
+
+	.tf_load		= tx4939ide_tf_load,
+	.tf_read		= tx4939ide_tf_read,
+
+	.input_data		= tx4939ide_input_data_swap,
+	.output_data		= tx4939ide_output_data_swap,
+};
+
+#else	/* __LITTLE_ENDIAN */
+
+static void tx4939ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_tf_load(drive, task);
+	if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+		tx4939ide_tf_load_fixup(drive, task);
+}
+
+static const struct ide_tp_ops tx4939ide_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= ide_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.read_sff_dma_status	= ide_read_sff_dma_status,
+
+	.set_irq		= ide_set_irq,
+
+	.tf_load		= tx4939ide_tf_load,
+	.tf_read		= ide_tf_read,
+
+	.input_data		= ide_input_data,
+	.output_data		= ide_output_data,
+};
+
+#endif	/* __LITTLE_ENDIAN */
+
+static const struct ide_port_ops tx4939ide_port_ops = {
+	.set_pio_mode = tx4939ide_set_pio_mode,
+	.set_dma_mode = tx4939ide_set_dma_mode,
+	.clear_irq = tx4939ide_clear_irq,
+	.cable_detect = tx4939ide_cable_detect,
+};
+
+static const struct ide_dma_ops tx4939ide_dma_ops = {
+	.dma_host_set = tx4939ide_dma_host_set,
+	.dma_setup = tx4939ide_dma_setup,
+	.dma_exec_cmd = ide_dma_exec_cmd,
+	.dma_start = ide_dma_start,
+	.dma_end = tx4939ide_dma_end,
+	.dma_test_irq = tx4939ide_dma_test_irq,
+	.dma_lost_irq = ide_dma_lost_irq,
+	.dma_timeout = ide_dma_timeout,
+};
+
+static const struct ide_port_info tx4939ide_port_info __initdata = {
+	.init_hwif = tx4939ide_init_hwif,
+	.init_dma = tx4939ide_init_dma,
+	.port_ops = &tx4939ide_port_ops,
+	.dma_ops = &tx4939ide_dma_ops,
+	.tp_ops = &tx4939ide_tp_ops,
+	.host_flags = IDE_HFLAG_MMIO,
+	.pio_mask = ATA_PIO4,
+	.mwdma_mask = ATA_MWDMA2,
+	.udma_mask = ATA_UDMA5,
+};
+
+static int __init tx4939ide_probe(struct platform_device *pdev)
+{
+	hw_regs_t hw;
+	hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_host *host;
+	struct resource *res;
+	int irq, ret;
+	unsigned long mapbase;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENODEV;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	if (!devm_request_mem_region(&pdev->dev, res->start,
+				     res->end - res->start + 1, "tx4938ide"))
+		return -EBUSY;
+	mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start,
+					      res->end - res->start + 1);
+	if (!mapbase)
+		return -EBUSY;
+	memset(&hw, 0, sizeof(hw));
+	hw.io_ports.data_addr =
+		mapbase + tx4939ide_swizzlew(TX4939IDE_Data);
+	hw.io_ports.error_addr =
+		mapbase + tx4939ide_swizzleb(TX4939IDE_Error_Feature);
+	hw.io_ports.nsect_addr =
+		mapbase + tx4939ide_swizzleb(TX4939IDE_Sec);
+	hw.io_ports.lbal_addr =
+		mapbase + tx4939ide_swizzleb(TX4939IDE_LBA0);
+	hw.io_ports.lbam_addr =
+		mapbase + tx4939ide_swizzleb(TX4939IDE_LBA1);
+	hw.io_ports.lbah_addr =
+		mapbase + tx4939ide_swizzleb(TX4939IDE_LBA2);
+	hw.io_ports.device_addr =
+		mapbase + tx4939ide_swizzleb(TX4939IDE_DevHead);
+	hw.io_ports.command_addr =
+		mapbase + tx4939ide_swizzleb(TX4939IDE_Stat_Cmd);
+	hw.io_ports.ctl_addr =
+		mapbase + tx4939ide_swizzleb(TX4939IDE_AltStat_DevCtl);
+	hw.irq = irq;
+	hw.dev = &pdev->dev;
+
+	pr_info("TX4939 IDE interface (base %#lx, irq %d)\n", mapbase, irq);
+	host = ide_host_alloc(&tx4939ide_port_info, hws);
+	if (!host)
+		return -ENOMEM;
+	/* use extra_base for base address of the all registers */
+	host->ports[0]->extra_base = mapbase;
+	ret = ide_host_register(host, &tx4939ide_port_info, hws);
+	if (ret) {
+		ide_host_free(host);
+		return ret;
+	}
+	platform_set_drvdata(pdev, host);
+	return 0;
+}
+
+static int __exit tx4939ide_remove(struct platform_device *pdev)
+{
+	struct ide_host *host = platform_get_drvdata(pdev);
+
+	ide_host_remove(host);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int tx4939ide_resume(struct platform_device *dev)
+{
+	struct ide_host *host = platform_get_drvdata(dev);
+	ide_hwif_t *hwif = host->ports[0];
+
+	tx4939ide_init_hwif(hwif);
+	return 0;
+}
+#else
+#define tx4939ide_resume	NULL
+#endif
+
+static struct platform_driver tx4939ide_driver = {
+	.driver = {
+		.name = MODNAME,
+		.owner = THIS_MODULE,
+	},
+	.remove = __exit_p(tx4939ide_remove),
+	.resume = tx4939ide_resume,
+};
+
+static int __init tx4939ide_init(void)
+{
+	return platform_driver_probe(&tx4939ide_driver, tx4939ide_probe);
+}
+
+static void __exit tx4939ide_exit(void)
+{
+	platform_driver_unregister(&tx4939ide_driver);
+}
+
+module_init(tx4939ide_init);
+module_exit(tx4939ide_exit);
+
+MODULE_DESCRIPTION("TX4939 internal IDE driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:tx4939ide");
diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/umc8672.c
similarity index 100%
rename from drivers/ide/legacy/umc8672.c
rename to drivers/ide/umc8672.c
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/via82cxxx.c
similarity index 100%
rename from drivers/ide/pci/via82cxxx.c
rename to drivers/ide/via82cxxx.c
diff --git a/drivers/idle/Kconfig b/drivers/idle/Kconfig
new file mode 100644
index 0000000..108264d
--- /dev/null
+++ b/drivers/idle/Kconfig
@@ -0,0 +1,17 @@
+
+menu "Memory power savings"
+
+config I7300_IDLE_IOAT_CHANNEL
+	bool
+
+config I7300_IDLE
+	tristate "Intel chipset idle memory power saving driver"
+	select I7300_IDLE_IOAT_CHANNEL
+	depends on X86_64 && EXPERIMENTAL
+	help
+	  Enable memory power savings when idle with certain Intel server
+	  chipsets. The chipset must have I/O AT support, such as the
+	  Intel 7300. The power savings depends on the type and quantity of
+	  DRAM devices.
+
+endmenu
diff --git a/drivers/idle/Makefile b/drivers/idle/Makefile
new file mode 100644
index 0000000..5f68fc3
--- /dev/null
+++ b/drivers/idle/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_I7300_IDLE)			+= i7300_idle.o
+
diff --git a/drivers/idle/i7300_idle.c b/drivers/idle/i7300_idle.c
new file mode 100644
index 0000000..fb176f6
--- /dev/null
+++ b/drivers/idle/i7300_idle.c
@@ -0,0 +1,609 @@
+/*
+ * (C) Copyright 2008 Intel Corporation
+ * Authors:
+ * Andy Henroid <andrew.d.henroid@intel.com>
+ * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ */
+
+/*
+ * Save DIMM power on Intel 7300-based platforms when all CPUs/cores
+ * are idle, using the DIMM thermal throttling capability.
+ *
+ * This driver depends on the Intel integrated DMA controller (I/O AT).
+ * If the driver for I/O AT (drivers/dma/ioatdma*) is also enabled,
+ * this driver should work cooperatively.
+ */
+
+/* #define DEBUG */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/notifier.h>
+#include <linux/cpumask.h>
+#include <linux/ktime.h>
+#include <linux/delay.h>
+#include <linux/debugfs.h>
+#include <linux/stop_machine.h>
+#include <linux/i7300_idle.h>
+
+#include <asm/idle.h>
+
+#include "../dma/ioatdma_hw.h"
+#include "../dma/ioatdma_registers.h"
+
+#define I7300_IDLE_DRIVER_VERSION	"1.55"
+#define I7300_PRINT			"i7300_idle:"
+
+#define MAX_STOP_RETRIES	10
+
+static int debug;
+module_param_named(debug, debug, uint, 0644);
+MODULE_PARM_DESC(debug, "Enable debug printks in this driver");
+
+#define dprintk(fmt, arg...) \
+	do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0)
+
+/*
+ * Value to set THRTLOW to when initiating throttling
+ *  0 = No throttling
+ *  1 = Throttle when > 4 activations per eval window (Maximum throttling)
+ *  2 = Throttle when > 8 activations
+ *  168 = Throttle when > 672 activations (Minimum throttling)
+ */
+#define MAX_THROTTLE_LOW_LIMIT		168
+static uint throttle_low_limit = 1;
+module_param_named(throttle_low_limit, throttle_low_limit, uint, 0644);
+MODULE_PARM_DESC(throttle_low_limit,
+		"Value for THRTLOWLM activation field "
+		"(0 = disable throttle, 1 = Max throttle, 168 = Min throttle)");
+
+/*
+ * simple invocation and duration statistics
+ */
+static unsigned long total_starts;
+static unsigned long total_us;
+
+#ifdef DEBUG
+static unsigned long past_skip;
+#endif
+
+static struct pci_dev *fbd_dev;
+
+static spinlock_t i7300_idle_lock;
+static int i7300_idle_active;
+
+static u8 i7300_idle_thrtctl_saved;
+static u8 i7300_idle_thrtlow_saved;
+static u32 i7300_idle_mc_saved;
+
+static cpumask_t idle_cpumask;
+static ktime_t start_ktime;
+static unsigned long avg_idle_us;
+
+static struct dentry *debugfs_dir;
+
+/* Begin: I/O AT Helper routines */
+
+#define IOAT_CHANBASE(ioat_ctl, chan) (ioat_ctl + 0x80 + 0x80 * chan)
+/* Snoop control (disable snoops when coherency is not important) */
+#define IOAT_DESC_SADDR_SNP_CTL (1UL << 1)
+#define IOAT_DESC_DADDR_SNP_CTL (1UL << 2)
+
+static struct pci_dev *ioat_dev;
+static struct ioat_dma_descriptor *ioat_desc; /* I/O AT desc & data (1 page) */
+static unsigned long ioat_desc_phys;
+static u8 *ioat_iomap; /* I/O AT memory-mapped control regs (aka CB_BAR) */
+static u8 *ioat_chanbase;
+
+/* Start I/O AT memory copy */
+static int i7300_idle_ioat_start(void)
+{
+	u32 err;
+	/* Clear error (due to circular descriptor pointer) */
+	err = readl(ioat_chanbase + IOAT_CHANERR_OFFSET);
+	if (err)
+		writel(err, ioat_chanbase + IOAT_CHANERR_OFFSET);
+
+	writeb(IOAT_CHANCMD_START, ioat_chanbase + IOAT1_CHANCMD_OFFSET);
+	return 0;
+}
+
+/* Stop I/O AT memory copy */
+static void i7300_idle_ioat_stop(void)
+{
+	int i;
+	u64 sts;
+
+	for (i = 0; i < MAX_STOP_RETRIES; i++) {
+		writeb(IOAT_CHANCMD_RESET,
+			ioat_chanbase + IOAT1_CHANCMD_OFFSET);
+
+		udelay(10);
+
+		sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
+			IOAT_CHANSTS_DMA_TRANSFER_STATUS;
+
+		if (sts != IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE)
+			break;
+
+	}
+
+	if (i == MAX_STOP_RETRIES) {
+		dprintk("failed to stop I/O AT after %d retries\n",
+			MAX_STOP_RETRIES);
+	}
+}
+
+/* Test I/O AT by copying 1024 byte from 2k to 1k */
+static int __init i7300_idle_ioat_selftest(u8 *ctl,
+		struct ioat_dma_descriptor *desc, unsigned long desc_phys)
+{
+	u64 chan_sts;
+
+	memset(desc, 0, 2048);
+	memset((u8 *) desc + 2048, 0xab, 1024);
+
+	desc[0].size = 1024;
+	desc[0].ctl = 0;
+	desc[0].src_addr = desc_phys + 2048;
+	desc[0].dst_addr = desc_phys + 1024;
+	desc[0].next = 0;
+
+	writeb(IOAT_CHANCMD_RESET, ioat_chanbase + IOAT1_CHANCMD_OFFSET);
+	writeb(IOAT_CHANCMD_START, ioat_chanbase + IOAT1_CHANCMD_OFFSET);
+
+	udelay(1000);
+
+	chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
+			IOAT_CHANSTS_DMA_TRANSFER_STATUS;
+
+	if (chan_sts != IOAT_CHANSTS_DMA_TRANSFER_STATUS_DONE) {
+		/* Not complete, reset the channel */
+		writeb(IOAT_CHANCMD_RESET,
+		       ioat_chanbase + IOAT1_CHANCMD_OFFSET);
+		return -1;
+	}
+
+	if (*(u32 *) ((u8 *) desc + 3068) != 0xabababab ||
+	    *(u32 *) ((u8 *) desc + 2044) != 0xabababab) {
+		dprintk("Data values src 0x%x, dest 0x%x, memset 0x%x\n",
+			*(u32 *) ((u8 *) desc + 2048),
+			*(u32 *) ((u8 *) desc + 1024),
+			*(u32 *) ((u8 *) desc + 3072));
+		return -1;
+	}
+	return 0;
+}
+
+static struct device dummy_dma_dev = {
+	.bus_id = "fallback device",
+	.coherent_dma_mask = DMA_64BIT_MASK,
+	.dma_mask = &dummy_dma_dev.coherent_dma_mask,
+};
+
+/* Setup and initialize I/O AT */
+/* This driver needs I/O AT as the throttling takes effect only when there is
+ * some memory activity. We use I/O AT to set up a dummy copy, while all CPUs
+ * go idle and memory is throttled.
+ */
+static int __init i7300_idle_ioat_init(void)
+{
+	u8 ver, chan_count, ioat_chan;
+	u16 chan_ctl;
+
+	ioat_iomap = (u8 *) ioremap_nocache(pci_resource_start(ioat_dev, 0),
+					    pci_resource_len(ioat_dev, 0));
+
+	if (!ioat_iomap) {
+		printk(KERN_ERR I7300_PRINT "failed to map I/O AT registers\n");
+		goto err_ret;
+	}
+
+	ver = readb(ioat_iomap + IOAT_VER_OFFSET);
+	if (ver != IOAT_VER_1_2) {
+		printk(KERN_ERR I7300_PRINT "unknown I/O AT version (%u.%u)\n",
+			ver >> 4, ver & 0xf);
+		goto err_unmap;
+	}
+
+	chan_count = readb(ioat_iomap + IOAT_CHANCNT_OFFSET);
+	if (!chan_count) {
+		printk(KERN_ERR I7300_PRINT "unexpected # of I/O AT channels "
+			"(%u)\n",
+			chan_count);
+		goto err_unmap;
+	}
+
+	ioat_chan = chan_count - 1;
+	ioat_chanbase = IOAT_CHANBASE(ioat_iomap, ioat_chan);
+
+	chan_ctl = readw(ioat_chanbase + IOAT_CHANCTRL_OFFSET);
+	if (chan_ctl & IOAT_CHANCTRL_CHANNEL_IN_USE) {
+		printk(KERN_ERR I7300_PRINT "channel %d in use\n", ioat_chan);
+		goto err_unmap;
+	}
+
+	writew(IOAT_CHANCTRL_CHANNEL_IN_USE,
+		ioat_chanbase + IOAT_CHANCTRL_OFFSET);
+
+	ioat_desc = (struct ioat_dma_descriptor *)dma_alloc_coherent(
+			&dummy_dma_dev, 4096,
+			(dma_addr_t *)&ioat_desc_phys, GFP_KERNEL);
+	if (!ioat_desc) {
+		printk(KERN_ERR I7300_PRINT "failed to allocate I/O AT desc\n");
+		goto err_mark_unused;
+	}
+
+	writel(ioat_desc_phys & 0xffffffffUL,
+	       ioat_chanbase + IOAT1_CHAINADDR_OFFSET_LOW);
+	writel(ioat_desc_phys >> 32,
+	       ioat_chanbase + IOAT1_CHAINADDR_OFFSET_HIGH);
+
+	if (i7300_idle_ioat_selftest(ioat_iomap, ioat_desc, ioat_desc_phys)) {
+		printk(KERN_ERR I7300_PRINT "I/O AT self-test failed\n");
+		goto err_free;
+	}
+
+	/* Setup circular I/O AT descriptor chain */
+	ioat_desc[0].ctl = IOAT_DESC_SADDR_SNP_CTL | IOAT_DESC_DADDR_SNP_CTL;
+	ioat_desc[0].src_addr = ioat_desc_phys + 2048;
+	ioat_desc[0].dst_addr = ioat_desc_phys + 3072;
+	ioat_desc[0].size = 128;
+	ioat_desc[0].next = ioat_desc_phys + sizeof(struct ioat_dma_descriptor);
+
+	ioat_desc[1].ctl = ioat_desc[0].ctl;
+	ioat_desc[1].src_addr = ioat_desc[0].src_addr;
+	ioat_desc[1].dst_addr = ioat_desc[0].dst_addr;
+	ioat_desc[1].size = ioat_desc[0].size;
+	ioat_desc[1].next = ioat_desc_phys;
+
+	return 0;
+
+err_free:
+	dma_free_coherent(&dummy_dma_dev, 4096, (void *)ioat_desc, 0);
+err_mark_unused:
+	writew(0, ioat_chanbase + IOAT_CHANCTRL_OFFSET);
+err_unmap:
+	iounmap(ioat_iomap);
+err_ret:
+	return -ENODEV;
+}
+
+/* Cleanup I/O AT */
+static void __exit i7300_idle_ioat_exit(void)
+{
+	int i;
+	u64 chan_sts;
+
+	i7300_idle_ioat_stop();
+
+	/* Wait for a while for the channel to halt before releasing */
+	for (i = 0; i < MAX_STOP_RETRIES; i++) {
+		writeb(IOAT_CHANCMD_RESET,
+		       ioat_chanbase + IOAT1_CHANCMD_OFFSET);
+
+		chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
+			IOAT_CHANSTS_DMA_TRANSFER_STATUS;
+
+		if (chan_sts != IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE) {
+			writew(0, ioat_chanbase + IOAT_CHANCTRL_OFFSET);
+			break;
+		}
+		udelay(1000);
+	}
+
+	chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
+			IOAT_CHANSTS_DMA_TRANSFER_STATUS;
+
+	/*
+	 * We tried to reset multiple times. If IO A/T channel is still active
+	 * flag an error and return without cleanup. Memory leak is better
+	 * than random corruption in that extreme error situation.
+	 */
+	if (chan_sts == IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE) {
+		printk(KERN_ERR I7300_PRINT "Unable to stop IO A/T channels."
+			" Not freeing resources\n");
+		return;
+	}
+
+	dma_free_coherent(&dummy_dma_dev, 4096, (void *)ioat_desc, 0);
+	iounmap(ioat_iomap);
+}
+
+/* End: I/O AT Helper routines */
+
+#define DIMM_THRTLOW 0x64
+#define DIMM_THRTCTL 0x67
+#define DIMM_THRTCTL_THRMHUNT (1UL << 0)
+#define DIMM_MC 0x40
+#define DIMM_GTW_MODE (1UL << 17)
+#define DIMM_GBLACT 0x60
+
+/*
+ * Keep track of an exponential-decaying average of recent idle durations.
+ * The latest duration gets DURATION_WEIGHT_PCT percentage weight
+ * in this average, with the old average getting the remaining weight.
+ *
+ * High weights emphasize recent history, low weights include long history.
+ */
+#define DURATION_WEIGHT_PCT 55
+
+/*
+ * When the decaying average of recent durations or the predicted duration
+ * of the next timer interrupt is shorter than duration_threshold, the
+ * driver will decline to throttle.
+ */
+#define DURATION_THRESHOLD_US 100
+
+
+/* Store DIMM thermal throttle configuration */
+static int i7300_idle_thrt_save(void)
+{
+	u32 new_mc_val;
+	u8 gblactlm;
+
+	pci_read_config_byte(fbd_dev, DIMM_THRTCTL, &i7300_idle_thrtctl_saved);
+	pci_read_config_byte(fbd_dev, DIMM_THRTLOW, &i7300_idle_thrtlow_saved);
+	pci_read_config_dword(fbd_dev, DIMM_MC, &i7300_idle_mc_saved);
+	/*
+	 * Make sure we have Global Throttling Window Mode set to have a
+	 * "short" window. This (mostly) works around an issue where
+	 * throttling persists until the end of the global throttling window
+	 * size. On the tested system, this was resulting in a maximum of
+	 * 64 ms to exit throttling (average 32 ms). The actual numbers
+	 * depends on system frequencies. Setting the short window reduces
+	 * this by a factor of 4096.
+	 *
+	 * We will only do this only if the system is set for
+	 * unlimited-activations while in open-loop throttling (i.e., when
+	 * Global Activation Throttle Limit is zero).
+	 */
+	pci_read_config_byte(fbd_dev, DIMM_GBLACT, &gblactlm);
+	dprintk("thrtctl_saved = 0x%02x, thrtlow_saved = 0x%02x\n",
+		i7300_idle_thrtctl_saved,
+		i7300_idle_thrtlow_saved);
+	dprintk("mc_saved = 0x%08x, gblactlm = 0x%02x\n",
+		i7300_idle_mc_saved,
+		gblactlm);
+	if (gblactlm == 0) {
+		new_mc_val = i7300_idle_mc_saved | DIMM_GTW_MODE;
+		pci_write_config_dword(fbd_dev, DIMM_MC, new_mc_val);
+		return 0;
+	} else {
+		dprintk("could not set GTW_MODE = 1 (OLTT enabled)\n");
+		return -ENODEV;
+	}
+}
+
+/* Restore DIMM thermal throttle configuration */
+static void i7300_idle_thrt_restore(void)
+{
+	pci_write_config_dword(fbd_dev, DIMM_MC, i7300_idle_mc_saved);
+	pci_write_config_byte(fbd_dev, DIMM_THRTLOW, i7300_idle_thrtlow_saved);
+	pci_write_config_byte(fbd_dev, DIMM_THRTCTL, i7300_idle_thrtctl_saved);
+}
+
+/* Enable DIMM thermal throttling */
+static void i7300_idle_start(void)
+{
+	u8 new_ctl;
+	u8 limit;
+
+	new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT;
+	pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
+
+	limit = throttle_low_limit;
+	if (unlikely(limit > MAX_THROTTLE_LOW_LIMIT))
+		limit = MAX_THROTTLE_LOW_LIMIT;
+
+	pci_write_config_byte(fbd_dev, DIMM_THRTLOW, limit);
+
+	new_ctl = i7300_idle_thrtctl_saved | DIMM_THRTCTL_THRMHUNT;
+	pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
+}
+
+/* Disable DIMM thermal throttling */
+static void i7300_idle_stop(void)
+{
+	u8 new_ctl;
+	u8 got_ctl;
+
+	new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT;
+	pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
+
+	pci_write_config_byte(fbd_dev, DIMM_THRTLOW, i7300_idle_thrtlow_saved);
+	pci_write_config_byte(fbd_dev, DIMM_THRTCTL, i7300_idle_thrtctl_saved);
+	pci_read_config_byte(fbd_dev, DIMM_THRTCTL, &got_ctl);
+	WARN_ON_ONCE(got_ctl != i7300_idle_thrtctl_saved);
+}
+
+
+/*
+ * i7300_avg_duration_check()
+ * return 0 if the decaying average of recent idle durations is
+ * more than DURATION_THRESHOLD_US
+ */
+static int i7300_avg_duration_check(void)
+{
+	if (avg_idle_us >= DURATION_THRESHOLD_US)
+		return 0;
+
+#ifdef DEBUG
+	past_skip++;
+#endif
+	return 1;
+}
+
+/* Idle notifier to look at idle CPUs */
+static int i7300_idle_notifier(struct notifier_block *nb, unsigned long val,
+				void *data)
+{
+	unsigned long flags;
+	ktime_t now_ktime;
+	static ktime_t idle_begin_time;
+	static int time_init = 1;
+
+	if (!throttle_low_limit)
+		return 0;
+
+	if (unlikely(time_init)) {
+		time_init = 0;
+		idle_begin_time = ktime_get();
+	}
+
+	spin_lock_irqsave(&i7300_idle_lock, flags);
+	if (val == IDLE_START) {
+
+		cpu_set(smp_processor_id(), idle_cpumask);
+
+		if (cpus_weight(idle_cpumask) != num_online_cpus())
+			goto end;
+
+		now_ktime = ktime_get();
+		idle_begin_time = now_ktime;
+
+		if (i7300_avg_duration_check())
+			goto end;
+
+		i7300_idle_active = 1;
+		total_starts++;
+		start_ktime = now_ktime;
+
+		i7300_idle_start();
+		i7300_idle_ioat_start();
+
+	} else if (val == IDLE_END) {
+		cpu_clear(smp_processor_id(), idle_cpumask);
+		if (cpus_weight(idle_cpumask) == (num_online_cpus() - 1)) {
+			/* First CPU coming out of idle */
+			u64 idle_duration_us;
+
+			now_ktime = ktime_get();
+
+			idle_duration_us = ktime_to_us(ktime_sub
+						(now_ktime, idle_begin_time));
+
+			avg_idle_us =
+				((100 - DURATION_WEIGHT_PCT) * avg_idle_us +
+				 DURATION_WEIGHT_PCT * idle_duration_us) / 100;
+
+			if (i7300_idle_active) {
+				ktime_t idle_ktime;
+
+				idle_ktime = ktime_sub(now_ktime, start_ktime);
+				total_us += ktime_to_us(idle_ktime);
+
+				i7300_idle_ioat_stop();
+				i7300_idle_stop();
+				i7300_idle_active = 0;
+			}
+		}
+	}
+end:
+	spin_unlock_irqrestore(&i7300_idle_lock, flags);
+	return 0;
+}
+
+static struct notifier_block i7300_idle_nb = {
+	.notifier_call = i7300_idle_notifier,
+};
+
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+int stats_open_generic(struct inode *inode, struct file *fp)
+{
+	fp->private_data = inode->i_private;
+	return 0;
+}
+
+static ssize_t stats_read_ul(struct file *fp, char __user *ubuf, size_t count,
+				loff_t *off)
+{
+	unsigned long *p = fp->private_data;
+	char buf[32];
+	int len;
+
+	len = snprintf(buf, 32, "%lu\n", *p);
+	return simple_read_from_buffer(ubuf, count, off, buf, len);
+}
+
+static const struct file_operations idle_fops = {
+	.open	= stats_open_generic,
+	.read	= stats_read_ul,
+};
+
+struct debugfs_file_info {
+	void *ptr;
+	char name[32];
+	struct dentry *file;
+} debugfs_file_list[] = {
+				{&total_starts, "total_starts", NULL},
+				{&total_us, "total_us", NULL},
+#ifdef DEBUG
+				{&past_skip, "past_skip", NULL},
+#endif
+				{NULL, "", NULL}
+			};
+
+static int __init i7300_idle_init(void)
+{
+	spin_lock_init(&i7300_idle_lock);
+	cpus_clear(idle_cpumask);
+	total_us = 0;
+
+	if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev))
+		return -ENODEV;
+
+	if (i7300_idle_thrt_save())
+		return -ENODEV;
+
+	if (i7300_idle_ioat_init())
+		return -ENODEV;
+
+	debugfs_dir = debugfs_create_dir("i7300_idle", NULL);
+	if (debugfs_dir) {
+		int i = 0;
+
+		while (debugfs_file_list[i].ptr != NULL) {
+			debugfs_file_list[i].file = debugfs_create_file(
+					debugfs_file_list[i].name,
+					S_IRUSR,
+					debugfs_dir,
+					debugfs_file_list[i].ptr,
+					&idle_fops);
+			i++;
+		}
+	}
+
+	idle_notifier_register(&i7300_idle_nb);
+
+	printk(KERN_INFO "i7300_idle: loaded v%s\n", I7300_IDLE_DRIVER_VERSION);
+	return 0;
+}
+
+static void __exit i7300_idle_exit(void)
+{
+	idle_notifier_unregister(&i7300_idle_nb);
+
+	if (debugfs_dir) {
+		int i = 0;
+
+		while (debugfs_file_list[i].file != NULL) {
+			debugfs_remove(debugfs_file_list[i].file);
+			i++;
+		}
+
+		debugfs_remove(debugfs_dir);
+	}
+	i7300_idle_thrt_restore();
+	i7300_idle_ioat_exit();
+}
+
+module_init(i7300_idle_init);
+module_exit(i7300_idle_exit);
+
+MODULE_AUTHOR("Andy Henroid <andrew.d.henroid@intel.com>");
+MODULE_DESCRIPTION("Intel Chipset DIMM Idle Power Saving Driver v"
+			I7300_IDLE_DRIVER_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index 49c45fe..5c54fc2 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -406,19 +406,15 @@
 
 	if (i == qp_info->snoop_table_size) {
 		/* Grow table. */
-		new_snoop_table = kmalloc(sizeof mad_snoop_priv *
-					  qp_info->snoop_table_size + 1,
-					  GFP_ATOMIC);
+		new_snoop_table = krealloc(qp_info->snoop_table,
+					   sizeof mad_snoop_priv *
+					   (qp_info->snoop_table_size + 1),
+					   GFP_ATOMIC);
 		if (!new_snoop_table) {
 			i = -ENOMEM;
 			goto out;
 		}
-		if (qp_info->snoop_table) {
-			memcpy(new_snoop_table, qp_info->snoop_table,
-			       sizeof mad_snoop_priv *
-			       qp_info->snoop_table_size);
-			kfree(qp_info->snoop_table);
-		}
+
 		qp_info->snoop_table = new_snoop_table;
 		qp_info->snoop_table_size++;
 	}
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index 3ddacf3..4346a245 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -904,8 +904,8 @@
 
 	mutex_lock(&file->mut);
 	mc = ucma_alloc_multicast(ctx);
-	if (IS_ERR(mc)) {
-		ret = PTR_ERR(mc);
+	if (!mc) {
+		ret = -ENOMEM;
 		goto err1;
 	}
 
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index c325c44..44e936e 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -1942,6 +1942,7 @@
 fail3:
 	cxgb3_free_atid(ep->com.tdev, ep->atid);
 fail2:
+	cm_id->rem_ref(cm_id);
 	put_ep(&ep->com);
 out:
 	return err;
diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h
index 5d7b785..4df887a 100644
--- a/drivers/infiniband/hw/ehca/ehca_classes.h
+++ b/drivers/infiniband/hw/ehca/ehca_classes.h
@@ -128,6 +128,8 @@
 	/* MR pgsize: bit 0-3 means 4K, 64K, 1M, 16M respectively */
 	u32 hca_cap_mr_pgsize;
 	int max_mtu;
+	int max_num_qps;
+	int max_num_cqs;
 	atomic_t num_cqs;
 	atomic_t num_qps;
 };
diff --git a/drivers/infiniband/hw/ehca/ehca_cq.c b/drivers/infiniband/hw/ehca/ehca_cq.c
index 33647a9..2f4c28a 100644
--- a/drivers/infiniband/hw/ehca/ehca_cq.c
+++ b/drivers/infiniband/hw/ehca/ehca_cq.c
@@ -132,9 +132,9 @@
 	if (cqe >= 0xFFFFFFFF - 64 - additional_cqe)
 		return ERR_PTR(-EINVAL);
 
-	if (!atomic_add_unless(&shca->num_cqs, 1, ehca_max_cq)) {
+	if (!atomic_add_unless(&shca->num_cqs, 1, shca->max_num_cqs)) {
 		ehca_err(device, "Unable to create CQ, max number of %i "
-			"CQs reached.", ehca_max_cq);
+			"CQs reached.", shca->max_num_cqs);
 		ehca_err(device, "To increase the maximum number of CQs "
 			"use the number_of_cqs module parameter.\n");
 		return ERR_PTR(-ENOSPC);
diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index 598844d..bb02a86 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -44,6 +44,8 @@
 #include <linux/slab.h>
 #endif
 
+#include <linux/notifier.h>
+#include <linux/memory.h>
 #include "ehca_classes.h"
 #include "ehca_iverbs.h"
 #include "ehca_mrmw.h"
@@ -366,22 +368,23 @@
 			shca->hca_cap_mr_pgsize |= pgsize_map[i + 1];
 
 	/* Set maximum number of CQs and QPs to calculate EQ size */
-	if (ehca_max_qp == -1)
-		ehca_max_qp = min_t(int, rblock->max_qp, EHCA_MAX_NUM_QUEUES);
-	else if (ehca_max_qp < 1 || ehca_max_qp > rblock->max_qp) {
-		ehca_gen_err("Requested number of QPs is out of range (1 - %i) "
-			"specified by HW", rblock->max_qp);
-		ret = -EINVAL;
-		goto sense_attributes1;
+	if (shca->max_num_qps == -1)
+		shca->max_num_qps = min_t(int, rblock->max_qp,
+					  EHCA_MAX_NUM_QUEUES);
+	else if (shca->max_num_qps < 1 || shca->max_num_qps > rblock->max_qp) {
+		ehca_gen_warn("The requested number of QPs is out of range "
+			      "(1 - %i) specified by HW. Value is set to %i",
+			      rblock->max_qp, rblock->max_qp);
+		shca->max_num_qps = rblock->max_qp;
 	}
 
-	if (ehca_max_cq == -1)
-		ehca_max_cq = min_t(int, rblock->max_cq, EHCA_MAX_NUM_QUEUES);
-	else if (ehca_max_cq < 1 || ehca_max_cq > rblock->max_cq) {
-		ehca_gen_err("Requested number of CQs is out of range (1 - %i) "
-			"specified by HW", rblock->max_cq);
-		ret = -EINVAL;
-		goto sense_attributes1;
+	if (shca->max_num_cqs == -1)
+		shca->max_num_cqs = min_t(int, rblock->max_cq,
+					  EHCA_MAX_NUM_QUEUES);
+	else if (shca->max_num_cqs < 1 || shca->max_num_cqs > rblock->max_cq) {
+		ehca_gen_warn("The requested number of CQs is out of range "
+			      "(1 - %i) specified by HW. Value is set to %i",
+			      rblock->max_cq, rblock->max_cq);
 	}
 
 	/* query max MTU from first port -- it's the same for all ports */
@@ -733,9 +736,13 @@
 		ehca_gen_err("Cannot allocate shca memory.");
 		return -ENOMEM;
 	}
+
 	mutex_init(&shca->modify_mutex);
 	atomic_set(&shca->num_cqs, 0);
 	atomic_set(&shca->num_qps, 0);
+	shca->max_num_qps = ehca_max_qp;
+	shca->max_num_cqs = ehca_max_cq;
+
 	for (i = 0; i < ARRAY_SIZE(shca->sport); i++)
 		spin_lock_init(&shca->sport[i].mod_sqp_lock);
 
@@ -755,7 +762,7 @@
 		goto probe1;
 	}
 
-	eq_size = 2 * ehca_max_cq + 4 * ehca_max_qp;
+	eq_size = 2 * shca->max_num_cqs + 4 * shca->max_num_qps;
 	/* create event queues */
 	ret = ehca_create_eq(shca, &shca->eq, EHCA_EQ, eq_size);
 	if (ret) {
@@ -964,6 +971,41 @@
 	spin_unlock(&shca_list_lock);
 }
 
+static int ehca_mem_notifier(struct notifier_block *nb,
+			     unsigned long action, void *data)
+{
+	static unsigned long ehca_dmem_warn_time;
+
+	switch (action) {
+	case MEM_CANCEL_OFFLINE:
+	case MEM_CANCEL_ONLINE:
+	case MEM_ONLINE:
+	case MEM_OFFLINE:
+		return NOTIFY_OK;
+	case MEM_GOING_ONLINE:
+	case MEM_GOING_OFFLINE:
+		/* only ok if no hca is attached to the lpar */
+		spin_lock(&shca_list_lock);
+		if (list_empty(&shca_list)) {
+			spin_unlock(&shca_list_lock);
+			return NOTIFY_OK;
+		} else {
+			spin_unlock(&shca_list_lock);
+			if (printk_timed_ratelimit(&ehca_dmem_warn_time,
+						   30 * 1000))
+				ehca_gen_err("DMEM operations are not allowed"
+					     "as long as an ehca adapter is"
+					     "attached to the LPAR");
+			return NOTIFY_BAD;
+		}
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block ehca_mem_nb = {
+	.notifier_call = ehca_mem_notifier,
+};
+
 static int __init ehca_module_init(void)
 {
 	int ret;
@@ -991,6 +1033,12 @@
 		goto module_init2;
 	}
 
+	ret = register_memory_notifier(&ehca_mem_nb);
+	if (ret) {
+		ehca_gen_err("Failed registering memory add/remove notifier");
+		goto module_init3;
+	}
+
 	if (ehca_poll_all_eqs != 1) {
 		ehca_gen_err("WARNING!!!");
 		ehca_gen_err("It is possible to lose interrupts.");
@@ -1003,6 +1051,9 @@
 
 	return 0;
 
+module_init3:
+	ibmebus_unregister_driver(&ehca_driver);
+
 module_init2:
 	ehca_destroy_slab_caches();
 
@@ -1018,6 +1069,8 @@
 
 	ibmebus_unregister_driver(&ehca_driver);
 
+	unregister_memory_notifier(&ehca_mem_nb);
+
 	ehca_destroy_slab_caches();
 
 	ehca_destroy_comp_pool();
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index 4dbe287..4d54b9f 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -465,9 +465,9 @@
 	u32 swqe_size = 0, rwqe_size = 0, ib_qp_num;
 	unsigned long flags;
 
-	if (!atomic_add_unless(&shca->num_qps, 1, ehca_max_qp)) {
+	if (!atomic_add_unless(&shca->num_qps, 1, shca->max_num_qps)) {
 		ehca_err(pd->device, "Unable to create QP, max number of %i "
-			 "QPs reached.", ehca_max_qp);
+			 "QPs reached.", shca->max_num_qps);
 		ehca_err(pd->device, "To increase the maximum number of QPs "
 			 "use the number_of_qps module parameter.\n");
 		return ERR_PTR(-ENOSPC);
@@ -502,6 +502,12 @@
 	if (init_attr->srq) {
 		my_srq = container_of(init_attr->srq, struct ehca_qp, ib_srq);
 
+		if (qp_type == IB_QPT_UC) {
+			ehca_err(pd->device, "UC with SRQ not supported");
+			atomic_dec(&shca->num_qps);
+			return ERR_PTR(-EINVAL);
+		}
+
 		has_srq = 1;
 		parms.ext_type = EQPT_SRQBASE;
 		parms.srq_qpn = my_srq->real_qp_num;
diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c
index cdca3a5..606f1e2 100644
--- a/drivers/infiniband/hw/mlx4/mad.c
+++ b/drivers/infiniband/hw/mlx4/mad.c
@@ -298,7 +298,7 @@
 	int p, q;
 	int ret;
 
-	for (p = 0; p < dev->dev->caps.num_ports; ++p)
+	for (p = 0; p < dev->num_ports; ++p)
 		for (q = 0; q <= 1; ++q) {
 			agent = ib_register_mad_agent(&dev->ib_dev, p + 1,
 						      q ? IB_QPT_GSI : IB_QPT_SMI,
@@ -314,7 +314,7 @@
 	return 0;
 
 err:
-	for (p = 0; p < dev->dev->caps.num_ports; ++p)
+	for (p = 0; p < dev->num_ports; ++p)
 		for (q = 0; q <= 1; ++q)
 			if (dev->send_agent[p][q])
 				ib_unregister_mad_agent(dev->send_agent[p][q]);
@@ -327,7 +327,7 @@
 	struct ib_mad_agent *agent;
 	int p, q;
 
-	for (p = 0; p < dev->dev->caps.num_ports; ++p) {
+	for (p = 0; p < dev->num_ports; ++p) {
 		for (q = 0; q <= 1; ++q) {
 			agent = dev->send_agent[p][q];
 			dev->send_agent[p][q] = NULL;
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index a3c2851..2e80f8f 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -574,7 +574,10 @@
 	ibdev->ib_dev.owner		= THIS_MODULE;
 	ibdev->ib_dev.node_type		= RDMA_NODE_IB_CA;
 	ibdev->ib_dev.local_dma_lkey	= dev->caps.reserved_lkey;
-	ibdev->ib_dev.phys_port_cnt	= dev->caps.num_ports;
+	ibdev->num_ports = 0;
+	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB)
+		ibdev->num_ports++;
+	ibdev->ib_dev.phys_port_cnt     = ibdev->num_ports;
 	ibdev->ib_dev.num_comp_vectors	= 1;
 	ibdev->ib_dev.dma_device	= &dev->pdev->dev;
 
@@ -691,7 +694,7 @@
 	struct mlx4_ib_dev *ibdev = ibdev_ptr;
 	int p;
 
-	for (p = 1; p <= dev->caps.num_ports; ++p)
+	for (p = 1; p <= ibdev->num_ports; ++p)
 		mlx4_CLOSE_PORT(dev, p);
 
 	mlx4_ib_mad_cleanup(ibdev);
@@ -706,6 +709,10 @@
 			  enum mlx4_dev_event event, int port)
 {
 	struct ib_event ibev;
+	struct mlx4_ib_dev *ibdev = to_mdev((struct ib_device *) ibdev_ptr);
+
+	if (port > ibdev->num_ports)
+		return;
 
 	switch (event) {
 	case MLX4_DEV_EVENT_PORT_UP:
diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h
index 6e2b0dc..9974e88 100644
--- a/drivers/infiniband/hw/mlx4/mlx4_ib.h
+++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h
@@ -162,6 +162,7 @@
 struct mlx4_ib_dev {
 	struct ib_device	ib_dev;
 	struct mlx4_dev	       *dev;
+	int			num_ports;
 	void __iomem	       *uar_map;
 
 	struct mlx4_uar		priv_uar;
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index baa01de..39167a7 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -451,6 +451,7 @@
 			    struct ib_qp_init_attr *init_attr,
 			    struct ib_udata *udata, int sqpn, struct mlx4_ib_qp *qp)
 {
+	int qpn;
 	int err;
 
 	mutex_init(&qp->mutex);
@@ -545,9 +546,17 @@
 		}
 	}
 
-	err = mlx4_qp_alloc(dev->dev, sqpn, &qp->mqp);
+	if (sqpn) {
+		qpn = sqpn;
+	} else {
+		err = mlx4_qp_reserve_range(dev->dev, 1, 1, &qpn);
+		if (err)
+			goto err_wrid;
+	}
+
+	err = mlx4_qp_alloc(dev->dev, qpn, &qp->mqp);
 	if (err)
-		goto err_wrid;
+		goto err_qpn;
 
 	/*
 	 * Hardware wants QPN written in big-endian order (after
@@ -560,6 +569,10 @@
 
 	return 0;
 
+err_qpn:
+	if (!sqpn)
+		mlx4_qp_release_range(dev->dev, qpn, 1);
+
 err_wrid:
 	if (pd->uobject) {
 		if (!init_attr->srq)
@@ -655,6 +668,10 @@
 	mlx4_ib_unlock_cqs(send_cq, recv_cq);
 
 	mlx4_qp_free(dev->dev, &qp->mqp);
+
+	if (!is_sqp(dev, qp))
+		mlx4_qp_release_range(dev->dev, qp->mqp.qpn, 1);
+
 	mlx4_mtt_cleanup(dev->dev, &qp->mtt);
 
 	if (is_user) {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index 68ba5c3..e0c7dfa 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -507,6 +507,7 @@
 void ipoib_drain_cq(struct net_device *dev);
 
 void ipoib_set_ethtool_ops(struct net_device *dev);
+int ipoib_set_dev_features(struct ipoib_dev_priv *priv, struct ib_device *hca);
 
 #ifdef CONFIG_INFINIBAND_IPOIB_CM
 
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
index 66af5c1..e9795f6 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
@@ -42,6 +42,13 @@
 	strncpy(drvinfo->driver, "ipoib", sizeof(drvinfo->driver) - 1);
 }
 
+static u32 ipoib_get_rx_csum(struct net_device *dev)
+{
+	struct ipoib_dev_priv *priv = netdev_priv(dev);
+	return test_bit(IPOIB_FLAG_CSUM, &priv->flags) &&
+		!test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags);
+}
+
 static int ipoib_get_coalesce(struct net_device *dev,
 			      struct ethtool_coalesce *coal)
 {
@@ -129,7 +136,7 @@
 
 static const struct ethtool_ops ipoib_ethtool_ops = {
 	.get_drvinfo		= ipoib_get_drvinfo,
-	.get_tso		= ethtool_op_get_tso,
+	.get_rx_csum		= ipoib_get_rx_csum,
 	.get_coalesce		= ipoib_get_coalesce,
 	.set_coalesce		= ipoib_set_coalesce,
 	.get_flags		= ethtool_op_get_flags,
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 0e748ae..28eb6f0 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -685,10 +685,6 @@
 	queue_delayed_work(ipoib_workqueue, &priv->ah_reap_task,
 			   round_jiffies_relative(HZ));
 
-	init_timer(&priv->poll_timer);
-	priv->poll_timer.function = ipoib_ib_tx_timer_func;
-	priv->poll_timer.data = (unsigned long)dev;
-
 	set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags);
 
 	return 0;
@@ -906,6 +902,9 @@
 		return -ENODEV;
 	}
 
+	setup_timer(&priv->poll_timer, ipoib_ib_tx_timer_func,
+		    (unsigned long) dev);
+
 	if (dev->flags & IFF_UP) {
 		if (ipoib_ib_dev_open(dev)) {
 			ipoib_transport_dev_cleanup(dev);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index c0ee5143..fddded7 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -1173,11 +1173,48 @@
 	return device_create_file(&dev->dev, &dev_attr_pkey);
 }
 
+int ipoib_set_dev_features(struct ipoib_dev_priv *priv, struct ib_device *hca)
+{
+	struct ib_device_attr *device_attr;
+	int result = -ENOMEM;
+
+	device_attr = kmalloc(sizeof *device_attr, GFP_KERNEL);
+	if (!device_attr) {
+		printk(KERN_WARNING "%s: allocation of %zu bytes failed\n",
+		       hca->name, sizeof *device_attr);
+		return result;
+	}
+
+	result = ib_query_device(hca, device_attr);
+	if (result) {
+		printk(KERN_WARNING "%s: ib_query_device failed (ret = %d)\n",
+		       hca->name, result);
+		kfree(device_attr);
+		return result;
+	}
+	priv->hca_caps = device_attr->device_cap_flags;
+
+	kfree(device_attr);
+
+	if (priv->hca_caps & IB_DEVICE_UD_IP_CSUM) {
+		set_bit(IPOIB_FLAG_CSUM, &priv->flags);
+		priv->dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+	}
+
+	if (lro)
+		priv->dev->features |= NETIF_F_LRO;
+
+	if (priv->dev->features & NETIF_F_SG && priv->hca_caps & IB_DEVICE_UD_TSO)
+		priv->dev->features |= NETIF_F_TSO;
+
+	return 0;
+}
+
+
 static struct net_device *ipoib_add_port(const char *format,
 					 struct ib_device *hca, u8 port)
 {
 	struct ipoib_dev_priv *priv;
-	struct ib_device_attr *device_attr;
 	struct ib_port_attr attr;
 	int result = -ENOMEM;
 
@@ -1206,31 +1243,8 @@
 		goto device_init_failed;
 	}
 
-	device_attr = kmalloc(sizeof *device_attr, GFP_KERNEL);
-	if (!device_attr) {
-		printk(KERN_WARNING "%s: allocation of %zu bytes failed\n",
-		       hca->name, sizeof *device_attr);
+	if (ipoib_set_dev_features(priv, hca))
 		goto device_init_failed;
-	}
-
-	result = ib_query_device(hca, device_attr);
-	if (result) {
-		printk(KERN_WARNING "%s: ib_query_device failed (ret = %d)\n",
-		       hca->name, result);
-		kfree(device_attr);
-		goto device_init_failed;
-	}
-	priv->hca_caps = device_attr->device_cap_flags;
-
-	kfree(device_attr);
-
-	if (priv->hca_caps & IB_DEVICE_UD_IP_CSUM) {
-		set_bit(IPOIB_FLAG_CSUM, &priv->flags);
-		priv->dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
-	}
-
-	if (lro)
-		priv->dev->features |= NETIF_F_LRO;
 
 	/*
 	 * Set the full membership bit, so that we join the right
@@ -1266,9 +1280,6 @@
 		goto event_failed;
 	}
 
-	if (priv->dev->features & NETIF_F_SG && priv->hca_caps & IB_DEVICE_UD_TSO)
-		priv->dev->features |= NETIF_F_TSO;
-
 	result = register_netdev(priv->dev);
 	if (result) {
 		printk(KERN_WARNING "%s: couldn't register ipoib port %d; error %d\n",
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
index b08eb56..2cf1a40 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
@@ -93,6 +93,10 @@
 	priv->mcast_mtu  = priv->admin_mtu = priv->dev->mtu;
 	set_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags);
 
+	result = ipoib_set_dev_features(priv, ppriv->ca);
+	if (result)
+		goto device_init_failed;
+
 	priv->pkey = pkey;
 
 	memcpy(priv->dev->dev_addr, ppriv->dev->dev_addr, INFINIBAND_ALEN);
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index f488b68..4e99342 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -25,8 +25,8 @@
 	  mice with wheels and extra buttons, Microsoft, Logitech or Genius
 	  compatible.
 
-	  Synaptics TouchPad users might be interested in a specialized
-	  XFree86 driver at:
+	  Synaptics, ALPS or Elantech TouchPad users might be interested
+	  in a specialized Xorg/XFree86 driver at:
 		<http://w1.894.telia.com/~u89404340/touchpad/index.html>
 	  and a new version of GPM at:
 		<http://www.geocities.com/dt_or/gpm/gpm.html>
@@ -87,6 +87,27 @@
 
 	  If unsure, say Y.
 
+config MOUSE_PS2_ELANTECH
+	bool "Elantech PS/2 protocol extension"
+	depends on MOUSE_PS2
+	help
+	  Say Y here if you have an Elantech PS/2 touchpad connected
+	  to your system.
+
+	  Note that if you enable this driver you will need an updated
+	  X.org Synaptics driver that does not require ABS_PRESSURE
+	  reports from the touchpad (i.e. post 1.5.0 version). You can
+	  grab a patch for the driver here:
+
+	  http://userweb.kernel.org/~dtor/synaptics-no-abspressure.patch
+
+	  If unsure, say N.
+
+	  This driver exposes some configuration registers via sysfs
+	  entries. For further information,
+	  see <file:Documentation/input/elantech.txt>.
+
+
 config MOUSE_PS2_TOUCHKIT
 	bool "eGalax TouchKit PS/2 protocol extension"
 	depends on MOUSE_PS2
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 8e6e690..96f1dd8 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -21,6 +21,7 @@
 psmouse-objs := psmouse-base.o synaptics.o
 
 psmouse-$(CONFIG_MOUSE_PS2_ALPS)	+= alps.o
+psmouse-$(CONFIG_MOUSE_PS2_ELANTECH)	+= elantech.o
 psmouse-$(CONFIG_MOUSE_PS2_OLPC)	+= hgpk.o
 psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP)	+= logips2pp.o
 psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK)	+= lifebook.o
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
new file mode 100644
index 0000000..b9a25d5
--- /dev/null
+++ b/drivers/input/mouse/elantech.c
@@ -0,0 +1,674 @@
+/*
+ * Elantech Touchpad driver (v5)
+ *
+ * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Trademarks are the property of their respective owners.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/libps2.h>
+#include "psmouse.h"
+#include "elantech.h"
+
+#define elantech_debug(format, arg...)				\
+	do {							\
+		if (etd->debug)					\
+			printk(KERN_DEBUG format, ##arg);	\
+	} while (0)
+
+/*
+ * Send a Synaptics style sliced query command
+ */
+static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c,
+				unsigned char *param)
+{
+	if (psmouse_sliced_command(psmouse, c) ||
+	    ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) {
+		pr_err("elantech.c: synaptics_send_cmd query 0x%02x failed.\n", c);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * A retrying version of ps2_command
+ */
+static int elantech_ps2_command(struct psmouse *psmouse,
+				unsigned char *param, int command)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	struct elantech_data *etd = psmouse->private;
+	int rc;
+	int tries = ETP_PS2_COMMAND_TRIES;
+
+	do {
+		rc = ps2_command(ps2dev, param, command);
+		if (rc == 0)
+			break;
+		tries--;
+		elantech_debug("elantech.c: retrying ps2 command 0x%02x (%d).\n",
+			command, tries);
+		msleep(ETP_PS2_COMMAND_DELAY);
+	} while (tries > 0);
+
+	if (rc)
+		pr_err("elantech.c: ps2 command 0x%02x failed.\n", command);
+
+	return rc;
+}
+
+/*
+ * Send an Elantech style special command to read a value from a register
+ */
+static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
+				unsigned char *val)
+{
+	struct elantech_data *etd = psmouse->private;
+	unsigned char param[3];
+	int rc = 0;
+
+	if (reg < 0x10 || reg > 0x26)
+		return -1;
+
+	if (reg > 0x11 && reg < 0x20)
+		return -1;
+
+	switch (etd->hw_version) {
+	case 1:
+		if (psmouse_sliced_command(psmouse, ETP_REGISTER_READ) ||
+		    psmouse_sliced_command(psmouse, reg) ||
+		    ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) {
+			rc = -1;
+		}
+		break;
+
+	case 2:
+		if (elantech_ps2_command(psmouse,  NULL, ETP_PS2_CUSTOM_COMMAND) ||
+		    elantech_ps2_command(psmouse,  NULL, ETP_REGISTER_READ) ||
+		    elantech_ps2_command(psmouse,  NULL, ETP_PS2_CUSTOM_COMMAND) ||
+		    elantech_ps2_command(psmouse,  NULL, reg) ||
+		    elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
+			rc = -1;
+		}
+		break;
+	}
+
+	if (rc)
+		pr_err("elantech.c: failed to read register 0x%02x.\n", reg);
+	else
+		*val = param[0];
+
+	return rc;
+}
+
+/*
+ * Send an Elantech style special command to write a register with a value
+ */
+static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg,
+				unsigned char val)
+{
+	struct elantech_data *etd = psmouse->private;
+	int rc = 0;
+
+	if (reg < 0x10 || reg > 0x26)
+		return -1;
+
+	if (reg > 0x11 && reg < 0x20)
+		return -1;
+
+	switch (etd->hw_version) {
+	case 1:
+		if (psmouse_sliced_command(psmouse, ETP_REGISTER_WRITE) ||
+		    psmouse_sliced_command(psmouse, reg) ||
+		    psmouse_sliced_command(psmouse, val) ||
+		    ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11)) {
+			rc = -1;
+		}
+		break;
+
+	case 2:
+		if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+		    elantech_ps2_command(psmouse, NULL, ETP_REGISTER_WRITE) ||
+		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+		    elantech_ps2_command(psmouse, NULL, reg) ||
+		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+		    elantech_ps2_command(psmouse, NULL, val) ||
+		    elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
+			rc = -1;
+		}
+		break;
+	}
+
+	if (rc)
+		pr_err("elantech.c: failed to write register 0x%02x with value 0x%02x.\n",
+			reg, val);
+
+	return rc;
+}
+
+/*
+ * Dump a complete mouse movement packet to the syslog
+ */
+static void elantech_packet_dump(unsigned char *packet, int size)
+{
+	int	i;
+
+	printk(KERN_DEBUG "elantech.c: PS/2 packet [");
+	for (i = 0; i < size; i++)
+		printk("%s0x%02x ", (i) ? ", " : " ", packet[i]);
+	printk("]\n");
+}
+
+/*
+ * Interpret complete data packets and report absolute mode input events for
+ * hardware version 1. (4 byte packets)
+ */
+static void elantech_report_absolute_v1(struct psmouse *psmouse)
+{
+	struct input_dev *dev = psmouse->dev;
+	struct elantech_data *etd = psmouse->private;
+	unsigned char *packet = psmouse->packet;
+	int fingers;
+
+	if (etd->fw_version_maj == 0x01) {
+		/* byte 0:  D   U  p1  p2   1  p3   R   L
+		   byte 1:  f   0  th  tw  x9  x8  y9  y8 */
+		fingers = ((packet[1] & 0x80) >> 7) +
+				((packet[1] & 0x30) >> 4);
+	} else {
+		/* byte 0: n1  n0  p2  p1   1  p3   R   L
+		   byte 1:  0   0   0   0  x9  x8  y9  y8 */
+		fingers = (packet[0] & 0xc0) >> 6;
+	}
+
+	input_report_key(dev, BTN_TOUCH, fingers != 0);
+
+	/* byte 2: x7  x6  x5  x4  x3  x2  x1  x0
+	   byte 3: y7  y6  y5  y4  y3  y2  y1  y0 */
+	if (fingers) {
+		input_report_abs(dev, ABS_X,
+			((packet[1] & 0x0c) << 6) | packet[2]);
+		input_report_abs(dev, ABS_Y, ETP_YMAX_V1 -
+			(((packet[1] & 0x03) << 8) | packet[3]));
+	}
+
+	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
+	input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
+	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
+	input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
+	input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+
+	if ((etd->fw_version_maj == 0x01) &&
+	    (etd->capabilities & ETP_CAP_HAS_ROCKER)) {
+		/* rocker up */
+		input_report_key(dev, BTN_FORWARD, packet[0] & 0x40);
+		/* rocker down */
+		input_report_key(dev, BTN_BACK, packet[0] & 0x80);
+	}
+
+	input_sync(dev);
+}
+
+/*
+ * Interpret complete data packets and report absolute mode input events for
+ * hardware version 2. (6 byte packets)
+ */
+static void elantech_report_absolute_v2(struct psmouse *psmouse)
+{
+	struct input_dev *dev = psmouse->dev;
+	unsigned char *packet = psmouse->packet;
+	int fingers, x1, y1, x2, y2;
+
+	/* byte 0: n1  n0   .   .   .   .   R   L */
+	fingers = (packet[0] & 0xc0) >> 6;
+	input_report_key(dev, BTN_TOUCH, fingers != 0);
+
+	switch (fingers) {
+	case 1:
+		/* byte 1: x15 x14 x13 x12 x11 x10 x9  x8
+		   byte 2: x7  x6  x5  x4  x4  x2  x1  x0 */
+		input_report_abs(dev, ABS_X, (packet[1] << 8) | packet[2]);
+		/* byte 4: y15 y14 y13 y12 y11 y10 y8  y8
+		   byte 5: y7  y6  y5  y4  y3  y2  y1  y0 */
+		input_report_abs(dev, ABS_Y, ETP_YMAX_V2 -
+			((packet[4] << 8) | packet[5]));
+		break;
+
+	case 2:
+		/* The coordinate of each finger is reported separately with
+		   a lower resolution for two finger touches */
+		/* byte 0:  .   .  ay8 ax8  .   .   .   .
+		   byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 */
+		x1 = ((packet[0] & 0x10) << 4) | packet[1];
+		/* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */
+		y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]);
+		/* byte 3:  .   .  by8 bx8  .   .   .   .
+		   byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 */
+		x2 = ((packet[3] & 0x10) << 4) | packet[4];
+		/* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */
+		y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]);
+		/* For compatibility with the X Synaptics driver scale up one
+		   coordinate and report as ordinary mouse movent */
+		input_report_abs(dev, ABS_X, x1 << 2);
+		input_report_abs(dev, ABS_Y, y1 << 2);
+		/* For compatibility with the proprietary X Elantech driver
+		   report both coordinates as hat coordinates */
+		input_report_abs(dev, ABS_HAT0X, x1);
+		input_report_abs(dev, ABS_HAT0Y, y1);
+		input_report_abs(dev, ABS_HAT1X, x2);
+		input_report_abs(dev, ABS_HAT1Y, y2);
+		break;
+	}
+
+	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
+	input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
+	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
+	input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
+	input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+
+	input_sync(dev);
+}
+
+static int elantech_check_parity_v1(struct psmouse *psmouse)
+{
+	struct elantech_data *etd = psmouse->private;
+	unsigned char *packet = psmouse->packet;
+	unsigned char p1, p2, p3;
+
+	/* Parity bits are placed differently */
+	if (etd->fw_version_maj == 0x01) {
+		/* byte 0:  D   U  p1  p2   1  p3   R   L */
+		p1 = (packet[0] & 0x20) >> 5;
+		p2 = (packet[0] & 0x10) >> 4;
+	} else {
+		/* byte 0: n1  n0  p2  p1   1  p3   R   L */
+		p1 = (packet[0] & 0x10) >> 4;
+		p2 = (packet[0] & 0x20) >> 5;
+	}
+
+	p3 = (packet[0] & 0x04) >> 2;
+
+	return etd->parity[packet[1]] == p1 &&
+	       etd->parity[packet[2]] == p2 &&
+	       etd->parity[packet[3]] == p3;
+}
+
+/*
+ * Process byte stream from mouse and handle complete packets
+ */
+static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
+{
+	struct elantech_data *etd = psmouse->private;
+
+	if (psmouse->pktcnt < psmouse->pktsize)
+		return PSMOUSE_GOOD_DATA;
+
+	if (etd->debug > 1)
+		elantech_packet_dump(psmouse->packet, psmouse->pktsize);
+
+	switch (etd->hw_version) {
+	case 1:
+		if (etd->paritycheck && !elantech_check_parity_v1(psmouse))
+			return PSMOUSE_BAD_DATA;
+
+		elantech_report_absolute_v1(psmouse);
+		break;
+
+	case 2:
+		/* We don't know how to check parity in protocol v2 */
+		elantech_report_absolute_v2(psmouse);
+		break;
+	}
+
+	return PSMOUSE_FULL_PACKET;
+}
+
+/*
+ * Put the touchpad into absolute mode
+ */
+static int elantech_set_absolute_mode(struct psmouse *psmouse)
+{
+	struct elantech_data *etd = psmouse->private;
+	unsigned char val;
+	int tries = ETP_READ_BACK_TRIES;
+	int rc = 0;
+
+	switch (etd->hw_version) {
+	case 1:
+		etd->reg_10 = 0x16;
+		etd->reg_11 = 0x8f;
+		if (elantech_write_reg(psmouse, 0x10, etd->reg_10) ||
+		    elantech_write_reg(psmouse, 0x11, etd->reg_11)) {
+			rc = -1;
+		}
+		break;
+
+	case 2:
+					/* Windows driver values */
+		etd->reg_10 = 0x54;
+		etd->reg_11 = 0x88;	/* 0x8a */
+		etd->reg_21 = 0x60;	/* 0x00 */
+		if (elantech_write_reg(psmouse, 0x10, etd->reg_10) ||
+		    elantech_write_reg(psmouse, 0x11, etd->reg_11) ||
+		    elantech_write_reg(psmouse, 0x21, etd->reg_21)) {
+			rc = -1;
+			break;
+		}
+		/*
+		 * Read back reg 0x10. The touchpad is probably initalising
+		 * and not ready until we read back the value we just wrote.
+		 */
+		do {
+			rc = elantech_read_reg(psmouse, 0x10, &val);
+			if (rc == 0)
+				break;
+			tries--;
+			elantech_debug("elantech.c: retrying read (%d).\n",
+				tries);
+			msleep(ETP_READ_BACK_DELAY);
+		} while (tries > 0);
+		if (rc)
+			pr_err("elantech.c: failed to read back register 0x10.\n");
+		break;
+	}
+
+	if (rc)
+		pr_err("elantech.c: failed to initialise registers.\n");
+
+	return rc;
+}
+
+/*
+ * Set the appropriate event bits for the input subsystem
+ */
+static void elantech_set_input_params(struct psmouse *psmouse)
+{
+	struct input_dev *dev = psmouse->dev;
+	struct elantech_data *etd = psmouse->private;
+
+	__set_bit(EV_KEY, dev->evbit);
+	__set_bit(EV_ABS, dev->evbit);
+
+	__set_bit(BTN_LEFT, dev->keybit);
+	__set_bit(BTN_RIGHT, dev->keybit);
+
+	__set_bit(BTN_TOUCH, dev->keybit);
+	__set_bit(BTN_TOOL_FINGER, dev->keybit);
+	__set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
+	__set_bit(BTN_TOOL_TRIPLETAP, dev->keybit);
+
+	switch (etd->hw_version) {
+	case 1:
+		/* Rocker button */
+		if ((etd->fw_version_maj == 0x01) &&
+		    (etd->capabilities & ETP_CAP_HAS_ROCKER)) {
+			__set_bit(BTN_FORWARD, dev->keybit);
+			__set_bit(BTN_BACK, dev->keybit);
+		}
+		input_set_abs_params(dev, ABS_X, ETP_XMIN_V1, ETP_XMAX_V1, 0, 0);
+		input_set_abs_params(dev, ABS_Y, ETP_YMIN_V1, ETP_YMAX_V1, 0, 0);
+		break;
+
+	case 2:
+		input_set_abs_params(dev, ABS_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0);
+		input_set_abs_params(dev, ABS_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0);
+		input_set_abs_params(dev, ABS_HAT0X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0);
+		input_set_abs_params(dev, ABS_HAT0Y, ETP_2FT_YMIN, ETP_2FT_YMAX, 0, 0);
+		input_set_abs_params(dev, ABS_HAT1X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0);
+		input_set_abs_params(dev, ABS_HAT1Y, ETP_2FT_YMIN, ETP_2FT_YMAX, 0, 0);
+		break;
+	}
+}
+
+struct elantech_attr_data {
+	size_t		field_offset;
+	unsigned char	reg;
+};
+
+/*
+ * Display a register value by reading a sysfs entry
+ */
+static ssize_t elantech_show_int_attr(struct psmouse *psmouse, void *data,
+					char *buf)
+{
+	struct elantech_data *etd = psmouse->private;
+	struct elantech_attr_data *attr = data;
+	unsigned char *reg = (unsigned char *) etd + attr->field_offset;
+	int rc = 0;
+
+	if (attr->reg)
+		rc = elantech_read_reg(psmouse, attr->reg, reg);
+
+	return sprintf(buf, "0x%02x\n", (attr->reg && rc) ? -1 : *reg);
+}
+
+/*
+ * Write a register value by writing a sysfs entry
+ */
+static ssize_t elantech_set_int_attr(struct psmouse *psmouse,
+				     void *data, const char *buf, size_t count)
+{
+	struct elantech_data *etd = psmouse->private;
+	struct elantech_attr_data *attr = data;
+	unsigned char *reg = (unsigned char *) etd + attr->field_offset;
+	unsigned long value;
+	int err;
+
+	err = strict_strtoul(buf, 16, &value);
+	if (err)
+		return err;
+
+	if (value > 0xff)
+		return -EINVAL;
+
+	/* Do we need to preserve some bits for version 2 hardware too? */
+	if (etd->hw_version == 1) {
+		if (attr->reg == 0x10)
+			/* Force absolute mode always on */
+			value |= ETP_R10_ABSOLUTE_MODE;
+		else if (attr->reg == 0x11)
+			/* Force 4 byte mode always on */
+			value |= ETP_R11_4_BYTE_MODE;
+	}
+
+	if (!attr->reg || elantech_write_reg(psmouse, attr->reg, value) == 0)
+		*reg = value;
+
+	return count;
+}
+
+#define ELANTECH_INT_ATTR(_name, _register)				\
+	static struct elantech_attr_data elantech_attr_##_name = {	\
+		.field_offset = offsetof(struct elantech_data, _name),	\
+		.reg = _register,					\
+	};								\
+	PSMOUSE_DEFINE_ATTR(_name, S_IWUSR | S_IRUGO,			\
+			    &elantech_attr_##_name,			\
+			    elantech_show_int_attr,			\
+			    elantech_set_int_attr)
+
+ELANTECH_INT_ATTR(reg_10, 0x10);
+ELANTECH_INT_ATTR(reg_11, 0x11);
+ELANTECH_INT_ATTR(reg_20, 0x20);
+ELANTECH_INT_ATTR(reg_21, 0x21);
+ELANTECH_INT_ATTR(reg_22, 0x22);
+ELANTECH_INT_ATTR(reg_23, 0x23);
+ELANTECH_INT_ATTR(reg_24, 0x24);
+ELANTECH_INT_ATTR(reg_25, 0x25);
+ELANTECH_INT_ATTR(reg_26, 0x26);
+ELANTECH_INT_ATTR(debug, 0);
+ELANTECH_INT_ATTR(paritycheck, 0);
+
+static struct attribute *elantech_attrs[] = {
+	&psmouse_attr_reg_10.dattr.attr,
+	&psmouse_attr_reg_11.dattr.attr,
+	&psmouse_attr_reg_20.dattr.attr,
+	&psmouse_attr_reg_21.dattr.attr,
+	&psmouse_attr_reg_22.dattr.attr,
+	&psmouse_attr_reg_23.dattr.attr,
+	&psmouse_attr_reg_24.dattr.attr,
+	&psmouse_attr_reg_25.dattr.attr,
+	&psmouse_attr_reg_26.dattr.attr,
+	&psmouse_attr_debug.dattr.attr,
+	&psmouse_attr_paritycheck.dattr.attr,
+	NULL
+};
+
+static struct attribute_group elantech_attr_group = {
+	.attrs = elantech_attrs,
+};
+
+/*
+ * Use magic knock to detect Elantech touchpad
+ */
+int elantech_detect(struct psmouse *psmouse, int set_properties)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	unsigned char param[3];
+
+	ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
+
+	if (ps2_command(ps2dev,  NULL, PSMOUSE_CMD_DISABLE) ||
+	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
+	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
+	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
+	    ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
+		pr_err("elantech.c: sending Elantech magic knock failed.\n");
+		return -1;
+	}
+
+	/*
+	 * Report this in case there are Elantech models that use a different
+	 * set of magic numbers
+	 */
+	if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) {
+		pr_info("elantech.c: unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
+			param[0], param[1], param[2]);
+		return -1;
+	}
+
+	if (set_properties) {
+		psmouse->vendor = "Elantech";
+		psmouse->name = "Touchpad";
+	}
+
+	return 0;
+}
+
+/*
+ * Clean up sysfs entries when disconnecting
+ */
+static void elantech_disconnect(struct psmouse *psmouse)
+{
+	sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj,
+			   &elantech_attr_group);
+	kfree(psmouse->private);
+	psmouse->private = NULL;
+}
+
+/*
+ * Put the touchpad back into absolute mode when reconnecting
+ */
+static int elantech_reconnect(struct psmouse *psmouse)
+{
+	if (elantech_detect(psmouse, 0))
+		return -1;
+
+	if (elantech_set_absolute_mode(psmouse)) {
+		pr_err("elantech.c: failed to put touchpad back into absolute mode.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Initialize the touchpad and create sysfs entries
+ */
+int elantech_init(struct psmouse *psmouse)
+{
+	struct elantech_data *etd;
+	int i, error;
+	unsigned char param[3];
+
+	etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL);
+	psmouse->private = etd;
+	if (!etd)
+		return -1;
+
+	etd->parity[0] = 1;
+	for (i = 1; i < 256; i++)
+		etd->parity[i] = etd->parity[i & (i - 1)] ^ 1;
+
+	/*
+	 * Find out what version hardware this is
+	 */
+	if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
+		pr_err("elantech.c: failed to query firmware version.\n");
+		goto init_fail;
+	}
+	pr_info("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
+		param[0], param[1], param[2]);
+	etd->fw_version_maj = param[0];
+	etd->fw_version_min = param[2];
+
+	/*
+	 * Assume every version greater than this is new EeePC style
+	 * hardware with 6 byte packets
+	 */
+	if (etd->fw_version_maj >= 0x02 && etd->fw_version_min >= 0x30) {
+		etd->hw_version = 2;
+		/* For now show extra debug information */
+		etd->debug = 1;
+		/* Don't know how to do parity checking for version 2 */
+		etd->paritycheck = 0;
+	} else {
+		etd->hw_version = 1;
+		etd->paritycheck = 1;
+	}
+	pr_info("elantech.c: assuming hardware version %d, firmware version %d.%d\n",
+		etd->hw_version, etd->fw_version_maj, etd->fw_version_min);
+
+	if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, param)) {
+		pr_err("elantech.c: failed to query capabilities.\n");
+		goto init_fail;
+	}
+	pr_info("elantech.c: Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n",
+		param[0], param[1], param[2]);
+	etd->capabilities = param[0];
+
+	if (elantech_set_absolute_mode(psmouse)) {
+		pr_err("elantech.c: failed to put touchpad into absolute mode.\n");
+		goto init_fail;
+	}
+
+	elantech_set_input_params(psmouse);
+
+	error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj,
+				   &elantech_attr_group);
+	if (error) {
+		pr_err("elantech.c: failed to create sysfs attributes, error: %d.\n",
+			error);
+		goto init_fail;
+	}
+
+	psmouse->protocol_handler = elantech_process_byte;
+	psmouse->disconnect = elantech_disconnect;
+	psmouse->reconnect = elantech_reconnect;
+	psmouse->pktsize = etd->hw_version == 2 ? 6 : 4;
+
+	return 0;
+
+ init_fail:
+	kfree(etd);
+	return -1;
+}
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
new file mode 100644
index 0000000..bee282b
--- /dev/null
+++ b/drivers/input/mouse/elantech.h
@@ -0,0 +1,124 @@
+/*
+ * Elantech Touchpad driver (v5)
+ *
+ * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Trademarks are the property of their respective owners.
+ */
+
+#ifndef _ELANTECH_H
+#define _ELANTECH_H
+
+/*
+ * Command values for Synaptics style queries
+ */
+#define ETP_FW_VERSION_QUERY		0x01
+#define ETP_CAPABILITIES_QUERY		0x02
+
+/*
+ * Command values for register reading or writing
+ */
+#define ETP_REGISTER_READ		0x10
+#define ETP_REGISTER_WRITE		0x11
+
+/*
+ * Hardware version 2 custom PS/2 command value
+ */
+#define ETP_PS2_CUSTOM_COMMAND		0xf8
+
+/*
+ * Times to retry a ps2_command and millisecond delay between tries
+ */
+#define ETP_PS2_COMMAND_TRIES		3
+#define ETP_PS2_COMMAND_DELAY		500
+
+/*
+ * Times to try to read back a register and millisecond delay between tries
+ */
+#define ETP_READ_BACK_TRIES		5
+#define ETP_READ_BACK_DELAY		2000
+
+/*
+ * Register bitmasks for hardware version 1
+ */
+#define ETP_R10_ABSOLUTE_MODE		0x04
+#define ETP_R11_4_BYTE_MODE		0x02
+
+/*
+ * Capability bitmasks
+ */
+#define ETP_CAP_HAS_ROCKER		0x04
+
+/*
+ * One hard to find application note states that X axis range is 0 to 576
+ * and Y axis range is 0 to 384 for harware version 1.
+ * Edge fuzz might be necessary because of bezel around the touchpad
+ */
+#define ETP_EDGE_FUZZ_V1		32
+
+#define ETP_XMIN_V1			(  0 + ETP_EDGE_FUZZ_V1)
+#define ETP_XMAX_V1			(576 - ETP_EDGE_FUZZ_V1)
+#define ETP_YMIN_V1			(  0 + ETP_EDGE_FUZZ_V1)
+#define ETP_YMAX_V1			(384 - ETP_EDGE_FUZZ_V1)
+
+/*
+ * It seems the resolution for hardware version 2 doubled.
+ * Hence the X and Y ranges are doubled too.
+ * The bezel around the pad also appears to be smaller
+ */
+#define ETP_EDGE_FUZZ_V2		8
+
+#define ETP_XMIN_V2			(   0 + ETP_EDGE_FUZZ_V2)
+#define ETP_XMAX_V2			(1152 - ETP_EDGE_FUZZ_V2)
+#define ETP_YMIN_V2			(   0 + ETP_EDGE_FUZZ_V2)
+#define ETP_YMAX_V2			( 768 - ETP_EDGE_FUZZ_V2)
+
+/*
+ * For two finger touches the coordinate of each finger gets reported
+ * separately but with reduced resolution.
+ */
+#define ETP_2FT_FUZZ			4
+
+#define ETP_2FT_XMIN			(  0 + ETP_2FT_FUZZ)
+#define ETP_2FT_XMAX			(288 - ETP_2FT_FUZZ)
+#define ETP_2FT_YMIN			(  0 + ETP_2FT_FUZZ)
+#define ETP_2FT_YMAX			(192 - ETP_2FT_FUZZ)
+
+struct elantech_data {
+	unsigned char reg_10;
+	unsigned char reg_11;
+	unsigned char reg_20;
+	unsigned char reg_21;
+	unsigned char reg_22;
+	unsigned char reg_23;
+	unsigned char reg_24;
+	unsigned char reg_25;
+	unsigned char reg_26;
+	unsigned char debug;
+	unsigned char capabilities;
+	unsigned char fw_version_maj;
+	unsigned char fw_version_min;
+	unsigned char hw_version;
+	unsigned char paritycheck;
+	unsigned char parity[256];
+};
+
+#ifdef CONFIG_MOUSE_PS2_ELANTECH
+int elantech_detect(struct psmouse *psmouse, int set_properties);
+int elantech_init(struct psmouse *psmouse);
+#else
+static inline int elantech_detect(struct psmouse *psmouse, int set_properties)
+{
+	return -ENOSYS;
+}
+static inline int elantech_init(struct psmouse *psmouse)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_MOUSE_PS2_ELANTECH */
+
+#endif
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 126e977..f8f86de 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -29,6 +29,7 @@
 #include "lifebook.h"
 #include "trackpoint.h"
 #include "touchkit_ps2.h"
+#include "elantech.h"
 
 #define DRIVER_DESC	"PS/2 mouse driver"
 
@@ -650,6 +651,19 @@
 		max_proto = PSMOUSE_IMEX;
 	}
 
+/*
+ * Try Elantech touchpad.
+ */
+	if (max_proto > PSMOUSE_IMEX &&
+			elantech_detect(psmouse, set_properties) == 0) {
+		if (!set_properties || elantech_init(psmouse) == 0)
+			return PSMOUSE_ELANTECH;
+/*
+ * Init failed, try basic relative protocols
+ */
+		max_proto = PSMOUSE_IMEX;
+	}
+
 	if (max_proto > PSMOUSE_IMEX) {
 		if (genius_detect(psmouse, set_properties) == 0)
 			return PSMOUSE_GENPS;
@@ -789,6 +803,15 @@
 		.detect		= hgpk_detect,
 	},
 #endif
+#ifdef CONFIG_MOUSE_PS2_ELANTECH
+	{
+		.type		= PSMOUSE_ELANTECH,
+		.name		= "ETPS/2",
+		.alias		= "elantech",
+		.detect		= elantech_detect,
+		.init		= elantech_init,
+	},
+ #endif
 	{
 		.type		= PSMOUSE_CORTRON,
 		.name		= "CortronPS/2",
diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
index 8b608a1..54ed267 100644
--- a/drivers/input/mouse/psmouse.h
+++ b/drivers/input/mouse/psmouse.h
@@ -90,6 +90,7 @@
 	PSMOUSE_TOUCHKIT_PS2,
 	PSMOUSE_CORTRON,
 	PSMOUSE_HGPK,
+	PSMOUSE_ELANTECH,
 	PSMOUSE_AUTO		/* This one should always be last */
 };
 
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index a321aea..eec375c 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -135,6 +135,14 @@
 			DMI_MATCH(DMI_PRODUCT_VERSION, "5a"),
 		},
 	},
+	{
+		.ident = "Blue FB5601",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "blue"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "FB5601"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "M606"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 8317fde..3d1ab8f 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -42,8 +42,9 @@
 	  module will be called h3600_ts_input.
 
 config TOUCHSCREEN_CORGI
-	tristate "SharpSL (Corgi and Spitz series) touchscreen driver"
+	tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
 	depends on PXA_SHARPSL
+	select CORGI_SSP_DEPRECATED
 	default y
 	help
 	  Say Y here to enable the driver for the touchscreen on the
@@ -54,6 +55,9 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called corgi_ts.
 
+	  NOTE: this driver is deprecated, try enable SPI and generic
+	  ADS7846-based touchscreen driver.
+
 config TOUCHSCREEN_FUJITSU
 	tristate "Fujitsu serial touchscreen"
 	select SERIO
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index c7ff1e1..e7fb7d2 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -113,11 +113,12 @@
 	  outputs. To be useful the particular board must have LEDs
 	  and they must be connected to the GPIO lines.
 
-config LEDS_CM_X270
-	tristate "LED Support for the CM-X270 LEDs"
-	depends on LEDS_CLASS && MACH_ARMCORE
+config LEDS_HP_DISK
+	tristate "LED Support for disk protection LED on HP notebooks"
+	depends on LEDS_CLASS && ACPI
 	help
-	  This option enables support for the CM-X270 LEDs.
+	  This option enable support for disk protection LED, found on
+	  newer HP notebooks.
 
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
@@ -157,6 +158,13 @@
 	  LED driver chips accessed via the I2C bus.  Supported
 	  devices include PCA9550, PCA9551, PCA9552, and PCA9553.
 
+config LEDS_DA903X
+	tristate "LED Support for DA9030/DA9034 PMIC"
+	depends on LEDS_CLASS && PMIC_DA903X
+	help
+	  This option enables support for on-chip LED drivers found
+	  on Dialog Semiconductor DA9030/DA9034 PMICs.
+
 comment "LED Triggers"
 
 config LEDS_TRIGGERS
@@ -193,6 +201,15 @@
 	  load average.
 	  If unsure, say Y.
 
+config LEDS_TRIGGER_BACKLIGHT
+	tristate "LED backlight Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to be controlled as a backlight device: they
+	  turn off and on when the display is blanked and unblanked.
+
+	  If unsure, say N.
+
 config LEDS_TRIGGER_DEFAULT_ON
 	tristate "LED Default ON Trigger"
 	depends on LEDS_TRIGGERS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index eb186c3..e1967a2 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -17,14 +17,16 @@
 obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunfire.o
 obj-$(CONFIG_LEDS_PCA9532)		+= leds-pca9532.o
 obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
-obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
 obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
 obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
 obj-$(CONFIG_LEDS_PCA955X)		+= leds-pca955x.o
+obj-$(CONFIG_LEDS_DA903X)		+= leds-da903x.o
+obj-$(CONFIG_LEDS_HP_DISK)		+= leds-hp-disk.o
 
 # LED Triggers
 obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
 obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
 obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
+obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o
 obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index ee74ee7..6c4a326 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -34,14 +34,11 @@
 		struct device_attribute *attr, char *buf)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-	ssize_t ret = 0;
 
 	/* no lock needed for this */
 	led_update_brightness(led_cdev);
-	sprintf(buf, "%u\n", led_cdev->brightness);
-	ret = strlen(buf) + 1;
 
-	return ret;
+	return sprintf(buf, "%u\n", led_cdev->brightness);
 }
 
 static ssize_t led_brightness_store(struct device *dev,
@@ -113,6 +110,9 @@
 	if (rc)
 		goto err_out;
 
+#ifdef CONFIG_LEDS_TRIGGERS
+	init_rwsem(&led_cdev->trigger_lock);
+#endif
 	/* add to the list of leds */
 	down_write(&leds_list_lock);
 	list_add_tail(&led_cdev->node, &leds_list);
@@ -121,8 +121,6 @@
 	led_update_brightness(led_cdev);
 
 #ifdef CONFIG_LEDS_TRIGGERS
-	init_rwsem(&led_cdev->trigger_lock);
-
 	rc = device_create_file(led_cdev->dev, &dev_attr_trigger);
 	if (rc)
 		goto err_out_led_list;
@@ -147,7 +145,7 @@
 EXPORT_SYMBOL_GPL(led_classdev_register);
 
 /**
- * __led_classdev_unregister - unregisters a object of led_properties class.
+ * led_classdev_unregister - unregisters a object of led_properties class.
  * @led_cdev: the led device to unregister
  *
  * Unregisters a previously registered via led_classdev_register object.
diff --git a/drivers/leds/leds-ams-delta.c b/drivers/leds/leds-ams-delta.c
index 32c98b2..1bd590b 100644
--- a/drivers/leds/leds-ams-delta.c
+++ b/drivers/leds/leds-ams-delta.c
@@ -107,27 +107,27 @@
 
 static int ams_delta_led_probe(struct platform_device *pdev)
 {
-	int i;
-	int ret;
+	int i, ret;
 
-	for (i = ret = 0; ret >= 0 && i < ARRAY_SIZE(ams_delta_leds); i++) {
+	for (i = 0; i < ARRAY_SIZE(ams_delta_leds); i++) {
 		ret = led_classdev_register(&pdev->dev,
 				&ams_delta_leds[i].cdev);
+		if (ret < 0)
+			goto fail;
 	}
 
-	if (ret < 0 && i > 1) {
-		for (i = i - 2; i >= 0; i--)
-			led_classdev_unregister(&ams_delta_leds[i].cdev);
-	}
-
-	return ret;
+	return 0;
+fail:
+	while (--i >= 0)
+		led_classdev_unregister(&ams_delta_leds[i].cdev);
+	return ret;	
 }
 
 static int ams_delta_led_remove(struct platform_device *pdev)
 {
 	int i;
 
-	for (i = ARRAY_SIZE(ams_delta_leds) - 1; i >= 0; i--)
+	for (i = 0; i < ARRAY_SIZE(ams_delta_leds); i--)
 		led_classdev_unregister(&ams_delta_leds[i].cdev);
 
 	return 0;
diff --git a/drivers/leds/leds-cm-x270.c b/drivers/leds/leds-cm-x270.c
deleted file mode 100644
index 836a43d..0000000
--- a/drivers/leds/leds-cm-x270.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * drivers/leds/leds-cm-x270.c
- *
- * Copyright 2007 CompuLab Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * Based on leds-corgi.c
- * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-
-#define GPIO_RED_LED			(93)
-#define GPIO_GREEN_LED			(94)
-
-static void cmx270_red_set(struct led_classdev *led_cdev,
-			   enum led_brightness value)
-{
-	if (value)
-		GPCR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED);
-	else
-		GPSR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED);
-}
-
-static void cmx270_green_set(struct led_classdev *led_cdev,
-			     enum led_brightness value)
-{
-	if (value)
-		GPCR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED);
-	else
-		GPSR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED);
-}
-
-static struct led_classdev cmx270_red_led = {
-	.name			= "cm-x270:red",
-	.default_trigger	= "nand-disk",
-	.brightness_set		= cmx270_red_set,
-};
-
-static struct led_classdev cmx270_green_led = {
-	.name			= "cm-x270:green",
-	.default_trigger	= "heartbeat",
-	.brightness_set		= cmx270_green_set,
-};
-
-#ifdef CONFIG_PM
-static int cmx270led_suspend(struct platform_device *dev, pm_message_t state)
-{
-	led_classdev_suspend(&cmx270_red_led);
-	led_classdev_suspend(&cmx270_green_led);
-	return 0;
-}
-
-static int cmx270led_resume(struct platform_device *dev)
-{
-	led_classdev_resume(&cmx270_red_led);
-	led_classdev_resume(&cmx270_green_led);
-	return 0;
-}
-#endif
-
-static int cmx270led_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	ret = led_classdev_register(&pdev->dev, &cmx270_red_led);
-	if (ret < 0)
-		return ret;
-
-	ret = led_classdev_register(&pdev->dev, &cmx270_green_led);
-	if (ret < 0)
-		led_classdev_unregister(&cmx270_red_led);
-
-	return ret;
-}
-
-static int cmx270led_remove(struct platform_device *pdev)
-{
-	led_classdev_unregister(&cmx270_red_led);
-	led_classdev_unregister(&cmx270_green_led);
-	return 0;
-}
-
-static struct platform_driver cmx270led_driver = {
-	.probe		= cmx270led_probe,
-	.remove		= cmx270led_remove,
-#ifdef CONFIG_PM
-	.suspend	= cmx270led_suspend,
-	.resume		= cmx270led_resume,
-#endif
-	.driver		= {
-		.name		= "cm-x270-led",
-		.owner		= THIS_MODULE,
-	},
-};
-
-static int __init cmx270led_init(void)
-{
-	return platform_driver_register(&cmx270led_driver);
-}
-
-static void __exit cmx270led_exit(void)
-{
-	platform_driver_unregister(&cmx270led_driver);
-}
-
-module_init(cmx270led_init);
-module_exit(cmx270led_exit);
-
-MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
-MODULE_DESCRIPTION("CM-x270 LED driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:cm-x270-led");
diff --git a/drivers/leds/leds-da903x.c b/drivers/leds/leds-da903x.c
new file mode 100644
index 0000000..2768c69
--- /dev/null
+++ b/drivers/leds/leds-da903x.c
@@ -0,0 +1,176 @@
+/*
+ * LEDs driver for Dialog Semiconductor DA9030/DA9034
+ *
+ * Copyright (C) 2008 Compulab, Ltd.
+ * 	Mike Rapoport <mike@compulab.co.il>
+ *
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ * 	Eric Miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/da903x.h>
+
+#define DA9030_LED1_CONTROL	0x20
+#define DA9030_LED2_CONTROL	0x21
+#define DA9030_LED3_CONTROL	0x22
+#define DA9030_LED4_CONTROL	0x23
+#define DA9030_LEDPC_CONTROL	0x24
+#define DA9030_MISC_CONTROL_A	0x26	/* Vibrator Control */
+
+#define DA9034_LED1_CONTROL	0x35
+#define DA9034_LED2_CONTROL	0x36
+#define DA9034_VIBRA		0x40
+
+struct da903x_led {
+	struct led_classdev	cdev;
+	struct work_struct	work;
+	struct device		*master;
+	enum led_brightness	new_brightness;
+	int			id;
+	int			flags;
+};
+
+#define DA9030_LED_OFFSET(id)	((id) - DA9030_ID_LED_1)
+#define DA9034_LED_OFFSET(id)	((id) - DA9034_ID_LED_1)
+
+static void da903x_led_work(struct work_struct *work)
+{
+	struct da903x_led *led = container_of(work, struct da903x_led, work);
+	uint8_t val;
+	int offset;
+
+	switch (led->id) {
+	case DA9030_ID_LED_1:
+	case DA9030_ID_LED_2:
+	case DA9030_ID_LED_3:
+	case DA9030_ID_LED_4:
+	case DA9030_ID_LED_PC:
+		offset = DA9030_LED_OFFSET(led->id);
+		val = led->flags & ~0x87;
+		val |= (led->new_brightness) ? 0x80 : 0; /* EN bit */
+		val |= (led->new_brightness >> 5) & 0x7; /* PWM<2:0> */
+		da903x_write(led->master, DA9030_LED1_CONTROL + offset, val);
+		break;
+	case DA9030_ID_VIBRA:
+		val = led->flags & ~0x80;
+		val |= (led->new_brightness) ? 0x80 : 0; /* EN bit */
+		da903x_write(led->master, DA9030_MISC_CONTROL_A, val);
+		break;
+	case DA9034_ID_LED_1:
+	case DA9034_ID_LED_2:
+		offset = DA9034_LED_OFFSET(led->id);
+		val = (led->new_brightness * 0x5f / LED_FULL) & 0x7f;
+		val |= (led->flags & DA9034_LED_RAMP) ? 0x80 : 0;
+		da903x_write(led->master, DA9034_LED1_CONTROL + offset, val);
+		break;
+	case DA9034_ID_VIBRA:
+		val = led->new_brightness & 0xfe;
+		da903x_write(led->master, DA9034_VIBRA, val);
+		break;
+	}
+}
+
+static void da903x_led_set(struct led_classdev *led_cdev,
+			   enum led_brightness value)
+{
+	struct da903x_led *led;
+	
+	led = container_of(led_cdev, struct da903x_led, cdev);
+	led->new_brightness = value;
+	schedule_work(&led->work);
+}
+
+static int __devinit da903x_led_probe(struct platform_device *pdev)
+{
+	struct led_info *pdata = pdev->dev.platform_data;
+	struct da903x_led *led;
+	int id, ret;
+
+	if (pdata == NULL)
+		return 0;
+
+	id = pdev->id;
+
+	if (!((id >= DA9030_ID_LED_1 && id <= DA9030_ID_VIBRA) ||
+	      (id >= DA9034_ID_LED_1 && id <= DA9034_ID_VIBRA))) {
+		dev_err(&pdev->dev, "invalid LED ID (%d) specified\n", id);
+		return -EINVAL;
+	}
+
+	led = kzalloc(sizeof(struct da903x_led), GFP_KERNEL);
+	if (led == NULL) {
+		dev_err(&pdev->dev, "failed to alloc memory for LED%d\n", id);
+		return -ENOMEM;
+	}
+
+	led->cdev.name = pdata->name;
+	led->cdev.default_trigger = pdata->default_trigger;
+	led->cdev.brightness_set = da903x_led_set;
+	led->cdev.brightness = LED_OFF;
+
+	led->id = id;
+	led->flags = pdata->flags;
+	led->master = pdev->dev.parent;
+	led->new_brightness = LED_OFF;
+
+	INIT_WORK(&led->work, da903x_led_work);
+
+	ret = led_classdev_register(led->master, &led->cdev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register LED %d\n", id);
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, led);
+	return 0;
+
+err:
+	kfree(led);
+	return ret;
+}
+
+static int __devexit da903x_led_remove(struct platform_device *pdev)
+{
+	struct da903x_led *led = platform_get_drvdata(pdev);
+
+	led_classdev_unregister(&led->cdev);
+	kfree(led);
+	return 0;
+}
+
+static struct platform_driver da903x_led_driver = {
+	.driver	= {
+		.name	= "da903x-led",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= da903x_led_probe,
+	.remove		= __devexit_p(da903x_led_remove),
+};
+
+static int __init da903x_led_init(void)
+{
+	return platform_driver_register(&da903x_led_driver);
+}
+module_init(da903x_led_init);
+
+static void __exit da903x_led_exit(void)
+{
+	platform_driver_unregister(&da903x_led_driver);
+}
+module_exit(da903x_led_exit);
+
+MODULE_DESCRIPTION("LEDs driver for Dialog Semiconductor DA9030/DA9034");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"
+	      "Mike Rapoport <mike@compulab.co.il>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da903x-led");
diff --git a/drivers/leds/leds-hp-disk.c b/drivers/leds/leds-hp-disk.c
new file mode 100644
index 0000000..74645ab
--- /dev/null
+++ b/drivers/leds/leds-hp-disk.c
@@ -0,0 +1,156 @@
+/*
+ *  leds-hp-disk.c - driver for HP "hard disk protection" LED
+ *
+ *  Copyright (C) 2008 Pavel Machek
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/kthread.h>
+#include <linux/version.h>
+#include <linux/leds.h>
+#include <acpi/acpi_drivers.h>
+
+#define DRIVER_NAME     "leds-hp-disk"
+#define ACPI_MDPS_CLASS "led"
+
+/* For automatic insertion of the module */
+static struct acpi_device_id hpled_device_ids[] = {
+	{"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, hpled_device_ids);
+
+struct acpi_hpled {
+	struct acpi_device	*device;   /* The ACPI device */
+};
+
+static struct acpi_hpled adev;
+
+static acpi_status hpled_acpi_write(acpi_handle handle, int reg)
+{
+	unsigned long long ret; /* Not used when writing */
+	union acpi_object in_obj[1];
+	struct acpi_object_list args = { 1, in_obj };
+
+	in_obj[0].type          = ACPI_TYPE_INTEGER;
+	in_obj[0].integer.value = reg;
+
+	return acpi_evaluate_integer(handle, "ALED", &args, &ret);
+}
+
+static void hpled_set(struct led_classdev *led_cdev,
+			       enum led_brightness value)
+{
+	hpled_acpi_write(adev.device->handle, !!value);
+}
+
+static struct led_classdev hpled_led = {
+	.name			= "hp:red:hddprotection",
+	.default_trigger	= "heartbeat",
+	.brightness_set		= hpled_set,
+};
+
+#ifdef CONFIG_PM
+static int hpled_suspend(struct acpi_device *dev, pm_message_t state)
+{
+	led_classdev_suspend(&hpled_led);
+	return 0;
+}
+
+static int hpled_resume(struct acpi_device *dev)
+{
+	led_classdev_resume(&hpled_led);
+	return 0;
+}
+#else
+#define hpled_suspend NULL
+#define hpled_resume NULL
+#endif
+
+static int hpled_add(struct acpi_device *device)
+{
+	int ret;
+
+	if (!device)
+		return -EINVAL;
+
+	adev.device = device;
+	strcpy(acpi_device_name(device), DRIVER_NAME);
+	strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
+	device->driver_data = &adev;
+
+	ret = led_classdev_register(NULL, &hpled_led);
+	return ret;
+}
+
+static int hpled_remove(struct acpi_device *device, int type)
+{
+	if (!device)
+		return -EINVAL;
+
+	led_classdev_unregister(&hpled_led);
+	return 0;
+}
+
+
+
+static struct acpi_driver leds_hp_driver = {
+	.name  = DRIVER_NAME,
+	.class = ACPI_MDPS_CLASS,
+	.ids   = hpled_device_ids,
+	.ops = {
+		.add     = hpled_add,
+		.remove  = hpled_remove,
+		.suspend = hpled_suspend,
+		.resume  = hpled_resume,
+	}
+};
+
+static int __init hpled_init_module(void)
+{
+	int ret;
+
+	if (acpi_disabled)
+		return -ENODEV;
+
+	ret = acpi_bus_register_driver(&leds_hp_driver);
+	if (ret < 0)
+		return ret;
+
+	printk(KERN_INFO DRIVER_NAME " driver loaded.\n");
+
+	return 0;
+}
+
+static void __exit hpled_exit_module(void)
+{
+	acpi_bus_unregister_driver(&leds_hp_driver);
+}
+
+MODULE_DESCRIPTION("Driver for HP disk protection LED");
+MODULE_AUTHOR("Pavel Machek <pavel@suse.cz>");
+MODULE_LICENSE("GPL");
+
+module_init(hpled_init_module);
+module_exit(hpled_exit_module);
diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c
index f5087291..4e2d1a4 100644
--- a/drivers/leds/leds-pca955x.c
+++ b/drivers/leds/leds-pca955x.c
@@ -226,7 +226,7 @@
 	pca955x_write_ls(pca955x->client, chip_ls, ls);
 }
 
-void pca955x_led_set(struct led_classdev *led_cdev, enum led_brightness value)
+static void pca955x_led_set(struct led_classdev *led_cdev, enum led_brightness value)
 {
 	struct pca955x_led *pca955x;
 
diff --git a/drivers/leds/leds-wrap.c b/drivers/leds/leds-wrap.c
index 7ac61a7..2f3aa87f 100644
--- a/drivers/leds/leds-wrap.c
+++ b/drivers/leds/leds-wrap.c
@@ -53,8 +53,9 @@
 }
 
 static struct led_classdev wrap_power_led = {
-	.name		= "wrap::power",
-	.brightness_set	= wrap_power_led_set,
+	.name			= "wrap::power",
+	.brightness_set		= wrap_power_led_set,
+	.default_trigger	= "default-on",
 };
 
 static struct led_classdev wrap_error_led = {
diff --git a/drivers/leds/ledtrig-backlight.c b/drivers/leds/ledtrig-backlight.c
new file mode 100644
index 0000000..d3dfcfb
--- /dev/null
+++ b/drivers/leds/ledtrig-backlight.c
@@ -0,0 +1,110 @@
+/*
+ * Backlight emulation LED trigger
+ *
+ * Copyright 2008 (C) Rodolfo Giometti <giometti@linux.it>
+ * Copyright 2008 (C) Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/fb.h>
+#include <linux/leds.h>
+#include "leds.h"
+
+#define BLANK		1
+#define UNBLANK		0
+
+struct bl_trig_notifier {
+	struct led_classdev *led;
+	int brightness;
+	int old_status;
+	struct notifier_block notifier;
+};
+
+static int fb_notifier_callback(struct notifier_block *p,
+				unsigned long event, void *data)
+{
+	struct bl_trig_notifier *n = container_of(p,
+					struct bl_trig_notifier, notifier);
+	struct led_classdev *led = n->led;
+	struct fb_event *fb_event = data;
+	int *blank = fb_event->data;
+
+	switch (event) {
+	case FB_EVENT_BLANK :
+		if (*blank && n->old_status == UNBLANK) {
+			n->brightness = led->brightness;
+			led_set_brightness(led, LED_OFF);
+			n->old_status = BLANK;
+		} else if (!*blank && n->old_status == BLANK) {
+			led_set_brightness(led, n->brightness);
+			n->old_status = UNBLANK;
+		}
+		break;
+	}
+
+	return 0;
+}
+
+static void bl_trig_activate(struct led_classdev *led)
+{
+	int ret;
+
+	struct bl_trig_notifier *n;
+
+	n = kzalloc(sizeof(struct bl_trig_notifier), GFP_KERNEL);
+	led->trigger_data = n;
+	if (!n) {
+		dev_err(led->dev, "unable to allocate backlight trigger\n");
+		return;
+	}
+
+	n->led = led;
+	n->brightness = led->brightness;
+	n->old_status = UNBLANK;
+	n->notifier.notifier_call = fb_notifier_callback;
+
+	ret = fb_register_client(&n->notifier);
+	if (ret)
+		dev_err(led->dev, "unable to register backlight trigger\n");
+}
+
+static void bl_trig_deactivate(struct led_classdev *led)
+{
+	struct bl_trig_notifier *n =
+		(struct bl_trig_notifier *) led->trigger_data;
+
+	if (n) {
+		fb_unregister_client(&n->notifier);
+		kfree(n);
+	}
+}
+
+static struct led_trigger bl_led_trigger = {
+	.name		= "backlight",
+	.activate	= bl_trig_activate,
+	.deactivate	= bl_trig_deactivate
+};
+
+static int __init bl_trig_init(void)
+{
+	return led_trigger_register(&bl_led_trigger);
+}
+
+static void __exit bl_trig_exit(void)
+{
+	led_trigger_unregister(&bl_led_trigger);
+}
+
+module_init(bl_trig_init);
+module_exit(bl_trig_exit);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("Backlight emulation LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c
index 5c99f4f..db68196 100644
--- a/drivers/leds/ledtrig-timer.c
+++ b/drivers/leds/ledtrig-timer.c
@@ -70,9 +70,7 @@
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
 	struct timer_trig_data *timer_data = led_cdev->trigger_data;
 
-	sprintf(buf, "%lu\n", timer_data->delay_on);
-
-	return strlen(buf) + 1;
+	return sprintf(buf, "%lu\n", timer_data->delay_on);
 }
 
 static ssize_t led_delay_on_store(struct device *dev,
@@ -116,9 +114,7 @@
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
 	struct timer_trig_data *timer_data = led_cdev->trigger_data;
 
-	sprintf(buf, "%lu\n", timer_data->delay_off);
-
-	return strlen(buf) + 1;
+	return sprintf(buf, "%lu\n", timer_data->delay_off);
 }
 
 static ssize_t led_delay_off_store(struct device *dev,
diff --git a/drivers/md/Makefile b/drivers/md/Makefile
index f1ef33d..1c61580 100644
--- a/drivers/md/Makefile
+++ b/drivers/md/Makefile
@@ -34,7 +34,7 @@
 obj-$(CONFIG_DM_DELAY)		+= dm-delay.o
 obj-$(CONFIG_DM_MULTIPATH)	+= dm-multipath.o dm-round-robin.o
 obj-$(CONFIG_DM_SNAPSHOT)	+= dm-snapshot.o
-obj-$(CONFIG_DM_MIRROR)		+= dm-mirror.o dm-log.o
+obj-$(CONFIG_DM_MIRROR)		+= dm-mirror.o dm-log.o dm-region-hash.o
 obj-$(CONFIG_DM_ZERO)		+= dm-zero.o
 
 quiet_cmd_unroll = UNROLL  $@
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 682ef9e..ce26c84 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -23,7 +23,7 @@
 #include <asm/page.h>
 #include <asm/unaligned.h>
 
-#include "dm.h"
+#include <linux/device-mapper.h>
 
 #define DM_MSG_PREFIX "crypt"
 #define MESG_STR(x) x, sizeof(x)
@@ -56,6 +56,7 @@
 	atomic_t pending;
 	int error;
 	sector_t sector;
+	struct dm_crypt_io *base_io;
 };
 
 struct dm_crypt_request {
@@ -93,7 +94,6 @@
 
 	struct workqueue_struct *io_queue;
 	struct workqueue_struct *crypt_queue;
-	wait_queue_head_t writeq;
 
 	/*
 	 * crypto related data
@@ -534,6 +534,7 @@
 	io->base_bio = bio;
 	io->sector = sector;
 	io->error = 0;
+	io->base_io = NULL;
 	atomic_set(&io->pending, 0);
 
 	return io;
@@ -547,6 +548,7 @@
 /*
  * One of the bios was finished. Check for completion of
  * the whole request and correctly clean up the buffer.
+ * If base_io is set, wait for the last fragment to complete.
  */
 static void crypt_dec_pending(struct dm_crypt_io *io)
 {
@@ -555,7 +557,14 @@
 	if (!atomic_dec_and_test(&io->pending))
 		return;
 
-	bio_endio(io->base_bio, io->error);
+	if (likely(!io->base_io))
+		bio_endio(io->base_bio, io->error);
+	else {
+		if (io->error && !io->base_io->error)
+			io->base_io->error = io->error;
+		crypt_dec_pending(io->base_io);
+	}
+
 	mempool_free(io, cc->io_pool);
 }
 
@@ -646,10 +655,7 @@
 static void kcryptd_io_write(struct dm_crypt_io *io)
 {
 	struct bio *clone = io->ctx.bio_out;
-	struct crypt_config *cc = io->target->private;
-
 	generic_make_request(clone);
-	wake_up(&cc->writeq);
 }
 
 static void kcryptd_io(struct work_struct *work)
@@ -688,7 +694,6 @@
 	BUG_ON(io->ctx.idx_out < clone->bi_vcnt);
 
 	clone->bi_sector = cc->start + io->sector;
-	io->sector += bio_sectors(clone);
 
 	if (async)
 		kcryptd_queue_io(io);
@@ -700,16 +705,18 @@
 {
 	struct crypt_config *cc = io->target->private;
 	struct bio *clone;
+	struct dm_crypt_io *new_io;
 	int crypt_finished;
 	unsigned out_of_pages = 0;
 	unsigned remaining = io->base_bio->bi_size;
+	sector_t sector = io->sector;
 	int r;
 
 	/*
 	 * Prevent io from disappearing until this function completes.
 	 */
 	crypt_inc_pending(io);
-	crypt_convert_init(cc, &io->ctx, NULL, io->base_bio, io->sector);
+	crypt_convert_init(cc, &io->ctx, NULL, io->base_bio, sector);
 
 	/*
 	 * The allocated buffers can be smaller than the whole bio,
@@ -726,6 +733,7 @@
 		io->ctx.idx_out = 0;
 
 		remaining -= clone->bi_size;
+		sector += bio_sectors(clone);
 
 		crypt_inc_pending(io);
 		r = crypt_convert(cc, &io->ctx);
@@ -741,6 +749,8 @@
 			 */
 			if (unlikely(r < 0))
 				break;
+
+			io->sector = sector;
 		}
 
 		/*
@@ -750,8 +760,33 @@
 		if (unlikely(out_of_pages))
 			congestion_wait(WRITE, HZ/100);
 
-		if (unlikely(remaining))
-			wait_event(cc->writeq, !atomic_read(&io->ctx.pending));
+		/*
+		 * With async crypto it is unsafe to share the crypto context
+		 * between fragments, so switch to a new dm_crypt_io structure.
+		 */
+		if (unlikely(!crypt_finished && remaining)) {
+			new_io = crypt_io_alloc(io->target, io->base_bio,
+						sector);
+			crypt_inc_pending(new_io);
+			crypt_convert_init(cc, &new_io->ctx, NULL,
+					   io->base_bio, sector);
+			new_io->ctx.idx_in = io->ctx.idx_in;
+			new_io->ctx.offset_in = io->ctx.offset_in;
+
+			/*
+			 * Fragments after the first use the base_io
+			 * pending count.
+			 */
+			if (!io->base_io)
+				new_io->base_io = io;
+			else {
+				new_io->base_io = io->base_io;
+				crypt_inc_pending(io->base_io);
+				crypt_dec_pending(io);
+			}
+
+			io = new_io;
+		}
 	}
 
 	crypt_dec_pending(io);
@@ -1078,7 +1113,6 @@
 		goto bad_crypt_queue;
 	}
 
-	init_waitqueue_head(&cc->writeq);
 	ti->private = cc;
 	return 0;
 
diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c
index bdd37f8..848b381 100644
--- a/drivers/md/dm-delay.c
+++ b/drivers/md/dm-delay.c
@@ -13,7 +13,8 @@
 #include <linux/bio.h>
 #include <linux/slab.h>
 
-#include "dm.h"
+#include <linux/device-mapper.h>
+
 #include "dm-bio-list.h"
 
 #define DM_MSG_PREFIX "delay"
diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c
index 769ab67..01590f3e 100644
--- a/drivers/md/dm-exception-store.c
+++ b/drivers/md/dm-exception-store.c
@@ -7,7 +7,6 @@
  * This file is released under the GPL.
  */
 
-#include "dm.h"
 #include "dm-snap.h"
 
 #include <linux/mm.h>
@@ -105,6 +104,11 @@
 	void *area;
 
 	/*
+	 * An area of zeros used to clear the next area.
+	 */
+	void *zero_area;
+
+	/*
 	 * Used to keep track of which metadata area the data in
 	 * 'chunk' refers to.
 	 */
@@ -149,6 +153,13 @@
 	if (!ps->area)
 		return r;
 
+	ps->zero_area = vmalloc(len);
+	if (!ps->zero_area) {
+		vfree(ps->area);
+		return r;
+	}
+	memset(ps->zero_area, 0, len);
+
 	return 0;
 }
 
@@ -156,6 +167,8 @@
 {
 	vfree(ps->area);
 	ps->area = NULL;
+	vfree(ps->zero_area);
+	ps->zero_area = NULL;
 }
 
 struct mdata_req {
@@ -220,25 +233,41 @@
  * Read or write a metadata area.  Remembering to skip the first
  * chunk which holds the header.
  */
-static int area_io(struct pstore *ps, chunk_t area, int rw)
+static int area_io(struct pstore *ps, int rw)
 {
 	int r;
 	chunk_t chunk;
 
-	chunk = area_location(ps, area);
+	chunk = area_location(ps, ps->current_area);
 
 	r = chunk_io(ps, chunk, rw, 0);
 	if (r)
 		return r;
 
-	ps->current_area = area;
 	return 0;
 }
 
-static int zero_area(struct pstore *ps, chunk_t area)
+static void zero_memory_area(struct pstore *ps)
 {
 	memset(ps->area, 0, ps->snap->chunk_size << SECTOR_SHIFT);
-	return area_io(ps, area, WRITE);
+}
+
+static int zero_disk_area(struct pstore *ps, chunk_t area)
+{
+	struct dm_io_region where = {
+		.bdev = ps->snap->cow->bdev,
+		.sector = ps->snap->chunk_size * area_location(ps, area),
+		.count = ps->snap->chunk_size,
+	};
+	struct dm_io_request io_req = {
+		.bi_rw = WRITE,
+		.mem.type = DM_IO_VMA,
+		.mem.ptr.vma = ps->zero_area,
+		.client = ps->io_client,
+		.notify.fn = NULL,
+	};
+
+	return dm_io(&io_req, 1, &where, NULL);
 }
 
 static int read_header(struct pstore *ps, int *new_snapshot)
@@ -411,15 +440,14 @@
 
 static int read_exceptions(struct pstore *ps)
 {
-	chunk_t area;
 	int r, full = 1;
 
 	/*
 	 * Keeping reading chunks and inserting exceptions until
 	 * we find a partially full area.
 	 */
-	for (area = 0; full; area++) {
-		r = area_io(ps, area, READ);
+	for (ps->current_area = 0; full; ps->current_area++) {
+		r = area_io(ps, READ);
 		if (r)
 			return r;
 
@@ -428,6 +456,8 @@
 			return r;
 	}
 
+	ps->current_area--;
+
 	return 0;
 }
 
@@ -486,12 +516,13 @@
 			return r;
 		}
 
-		r = zero_area(ps, 0);
+		ps->current_area = 0;
+		zero_memory_area(ps);
+		r = zero_disk_area(ps, 0);
 		if (r) {
-			DMWARN("zero_area(0) failed");
+			DMWARN("zero_disk_area(0) failed");
 			return r;
 		}
-
 	} else {
 		/*
 		 * Sanity checks.
@@ -551,7 +582,6 @@
 			      void (*callback) (void *, int success),
 			      void *callback_context)
 {
-	int r;
 	unsigned int i;
 	struct pstore *ps = get_info(store);
 	struct disk_exception de;
@@ -572,33 +602,41 @@
 	cb->context = callback_context;
 
 	/*
-	 * If there are no more exceptions in flight, or we have
-	 * filled this metadata area we commit the exceptions to
-	 * disk.
+	 * If there are exceptions in flight and we have not yet
+	 * filled this metadata area there's nothing more to do.
 	 */
-	if (atomic_dec_and_test(&ps->pending_count) ||
-	    (ps->current_committed == ps->exceptions_per_area)) {
-		r = area_io(ps, ps->current_area, WRITE);
-		if (r)
-			ps->valid = 0;
+	if (!atomic_dec_and_test(&ps->pending_count) &&
+	    (ps->current_committed != ps->exceptions_per_area))
+		return;
 
-		/*
-		 * Have we completely filled the current area ?
-		 */
-		if (ps->current_committed == ps->exceptions_per_area) {
-			ps->current_committed = 0;
-			r = zero_area(ps, ps->current_area + 1);
-			if (r)
-				ps->valid = 0;
-		}
+	/*
+	 * If we completely filled the current area, then wipe the next one.
+	 */
+	if ((ps->current_committed == ps->exceptions_per_area) &&
+	     zero_disk_area(ps, ps->current_area + 1))
+		ps->valid = 0;
 
-		for (i = 0; i < ps->callback_count; i++) {
-			cb = ps->callbacks + i;
-			cb->callback(cb->context, r == 0 ? 1 : 0);
-		}
+	/*
+	 * Commit exceptions to disk.
+	 */
+	if (ps->valid && area_io(ps, WRITE))
+		ps->valid = 0;
 
-		ps->callback_count = 0;
+	/*
+	 * Advance to the next area if this one is full.
+	 */
+	if (ps->current_committed == ps->exceptions_per_area) {
+		ps->current_committed = 0;
+		ps->current_area++;
+		zero_memory_area(ps);
 	}
+
+	for (i = 0; i < ps->callback_count; i++) {
+		cb = ps->callbacks + i;
+		cb->callback(cb->context, ps->valid);
+	}
+
+	ps->callback_count = 0;
 }
 
 static void persistent_drop(struct exception_store *store)
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index 4789c42..2fd6d44 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -5,7 +5,7 @@
  * This file is released under the GPL.
  */
 
-#include "dm.h"
+#include <linux/device-mapper.h>
 
 #include <linux/bio.h>
 #include <linux/mempool.h>
diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c
index dca401d..777c948 100644
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -988,9 +988,9 @@
 	return r;
 }
 
-static inline int get_mode(struct dm_ioctl *param)
+static inline fmode_t get_mode(struct dm_ioctl *param)
 {
-	int mode = FMODE_READ | FMODE_WRITE;
+	fmode_t mode = FMODE_READ | FMODE_WRITE;
 
 	if (param->flags & DM_READONLY_FLAG)
 		mode = FMODE_READ;
diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c
index 996802b..3073618 100644
--- a/drivers/md/dm-kcopyd.c
+++ b/drivers/md/dm-kcopyd.c
@@ -22,6 +22,7 @@
 #include <linux/vmalloc.h>
 #include <linux/workqueue.h>
 #include <linux/mutex.h>
+#include <linux/device-mapper.h>
 #include <linux/dm-kcopyd.h>
 
 #include "dm.h"
@@ -268,6 +269,17 @@
 	spin_unlock_irqrestore(&kc->job_lock, flags);
 }
 
+
+static void push_head(struct list_head *jobs, struct kcopyd_job *job)
+{
+	unsigned long flags;
+	struct dm_kcopyd_client *kc = job->kc;
+
+	spin_lock_irqsave(&kc->job_lock, flags);
+	list_add(&job->list, jobs);
+	spin_unlock_irqrestore(&kc->job_lock, flags);
+}
+
 /*
  * These three functions process 1 item from the corresponding
  * job list.
@@ -398,7 +410,7 @@
 			 * We couldn't service this job ATM, so
 			 * push this job back onto the list.
 			 */
-			push(jobs, job);
+			push_head(jobs, job);
 			break;
 		}
 
diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c
index 6449bcd..44042be 100644
--- a/drivers/md/dm-linear.c
+++ b/drivers/md/dm-linear.c
@@ -5,12 +5,12 @@
  */
 
 #include "dm.h"
-
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/blkdev.h>
 #include <linux/bio.h>
 #include <linux/slab.h>
+#include <linux/device-mapper.h>
 
 #define DM_MSG_PREFIX "linear"
 
@@ -110,20 +110,11 @@
 	return 0;
 }
 
-static int linear_ioctl(struct dm_target *ti, struct inode *inode,
-			struct file *filp, unsigned int cmd,
+static int linear_ioctl(struct dm_target *ti, unsigned int cmd,
 			unsigned long arg)
 {
 	struct linear_c *lc = (struct linear_c *) ti->private;
-	struct block_device *bdev = lc->dev->bdev;
-	struct file fake_file = {};
-	struct dentry fake_dentry = {};
-
-	fake_file.f_mode = lc->dev->mode;
-	fake_file.f_path.dentry = &fake_dentry;
-	fake_dentry.d_inode = bdev->bd_inode;
-
-	return blkdev_driver_ioctl(bdev->bd_inode, &fake_file, bdev->bd_disk, cmd, arg);
+	return __blkdev_driver_ioctl(lc->dev->bdev, lc->dev->mode, cmd, arg);
 }
 
 static int linear_merge(struct dm_target *ti, struct bvec_merge_data *bvm,
diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c
index 5b48478..a8c0fc7 100644
--- a/drivers/md/dm-log.c
+++ b/drivers/md/dm-log.c
@@ -12,7 +12,7 @@
 #include <linux/dm-io.h>
 #include <linux/dm-dirty-log.h>
 
-#include "dm.h"
+#include <linux/device-mapper.h>
 
 #define DM_MSG_PREFIX "dirty region log"
 
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 9bf3460c..4840733 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -5,7 +5,8 @@
  * This file is released under the GPL.
  */
 
-#include "dm.h"
+#include <linux/device-mapper.h>
+
 #include "dm-path-selector.h"
 #include "dm-bio-list.h"
 #include "dm-bio-record.h"
@@ -1395,19 +1396,15 @@
 	return -EINVAL;
 }
 
-static int multipath_ioctl(struct dm_target *ti, struct inode *inode,
-			   struct file *filp, unsigned int cmd,
+static int multipath_ioctl(struct dm_target *ti, unsigned int cmd,
 			   unsigned long arg)
 {
 	struct multipath *m = (struct multipath *) ti->private;
 	struct block_device *bdev = NULL;
+	fmode_t mode = 0;
 	unsigned long flags;
-	struct file fake_file = {};
-	struct dentry fake_dentry = {};
 	int r = 0;
 
-	fake_file.f_path.dentry = &fake_dentry;
-
 	spin_lock_irqsave(&m->lock, flags);
 
 	if (!m->current_pgpath)
@@ -1415,8 +1412,7 @@
 
 	if (m->current_pgpath) {
 		bdev = m->current_pgpath->path.dev->bdev;
-		fake_dentry.d_inode = bdev->bd_inode;
-		fake_file.f_mode = m->current_pgpath->path.dev->mode;
+		mode = m->current_pgpath->path.dev->mode;
 	}
 
 	if (m->queue_io)
@@ -1426,8 +1422,7 @@
 
 	spin_unlock_irqrestore(&m->lock, flags);
 
-	return r ? : blkdev_driver_ioctl(bdev->bd_inode, &fake_file,
-					 bdev->bd_disk, cmd, arg);
+	return r ? : __blkdev_driver_ioctl(bdev, mode, cmd, arg);
 }
 
 /*-----------------------------------------------------------------
diff --git a/drivers/md/dm-path-selector.c b/drivers/md/dm-path-selector.c
index ca1bb63..96ea226 100644
--- a/drivers/md/dm-path-selector.c
+++ b/drivers/md/dm-path-selector.c
@@ -9,7 +9,8 @@
  * Path selector registration.
  */
 
-#include "dm.h"
+#include <linux/device-mapper.h>
+
 #include "dm-path-selector.h"
 
 #include <linux/slab.h>
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index 29913e4..92dcc06 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -1,30 +1,30 @@
 /*
  * Copyright (C) 2003 Sistina Software Limited.
+ * Copyright (C) 2005-2008 Red Hat, Inc. All rights reserved.
  *
  * This file is released under the GPL.
  */
 
-#include "dm.h"
 #include "dm-bio-list.h"
 #include "dm-bio-record.h"
 
-#include <linux/ctype.h>
 #include <linux/init.h>
 #include <linux/mempool.h>
 #include <linux/module.h>
 #include <linux/pagemap.h>
 #include <linux/slab.h>
-#include <linux/time.h>
-#include <linux/vmalloc.h>
 #include <linux/workqueue.h>
-#include <linux/log2.h>
-#include <linux/hardirq.h>
+#include <linux/device-mapper.h>
 #include <linux/dm-io.h>
 #include <linux/dm-dirty-log.h>
 #include <linux/dm-kcopyd.h>
+#include <linux/dm-region-hash.h>
 
 #define DM_MSG_PREFIX "raid1"
+
+#define MAX_RECOVERY 1	/* Maximum number of regions recovered in parallel. */
 #define DM_IO_PAGES 64
+#define DM_KCOPYD_PAGES 64
 
 #define DM_RAID1_HANDLE_ERRORS 0x01
 #define errors_handled(p)	((p)->features & DM_RAID1_HANDLE_ERRORS)
@@ -32,87 +32,6 @@
 static DECLARE_WAIT_QUEUE_HEAD(_kmirrord_recovery_stopped);
 
 /*-----------------------------------------------------------------
- * Region hash
- *
- * The mirror splits itself up into discrete regions.  Each
- * region can be in one of three states: clean, dirty,
- * nosync.  There is no need to put clean regions in the hash.
- *
- * In addition to being present in the hash table a region _may_
- * be present on one of three lists.
- *
- *   clean_regions: Regions on this list have no io pending to
- *   them, they are in sync, we are no longer interested in them,
- *   they are dull.  rh_update_states() will remove them from the
- *   hash table.
- *
- *   quiesced_regions: These regions have been spun down, ready
- *   for recovery.  rh_recovery_start() will remove regions from
- *   this list and hand them to kmirrord, which will schedule the
- *   recovery io with kcopyd.
- *
- *   recovered_regions: Regions that kcopyd has successfully
- *   recovered.  rh_update_states() will now schedule any delayed
- *   io, up the recovery_count, and remove the region from the
- *   hash.
- *
- * There are 2 locks:
- *   A rw spin lock 'hash_lock' protects just the hash table,
- *   this is never held in write mode from interrupt context,
- *   which I believe means that we only have to disable irqs when
- *   doing a write lock.
- *
- *   An ordinary spin lock 'region_lock' that protects the three
- *   lists in the region_hash, with the 'state', 'list' and
- *   'bhs_delayed' fields of the regions.  This is used from irq
- *   context, so all other uses will have to suspend local irqs.
- *---------------------------------------------------------------*/
-struct mirror_set;
-struct region_hash {
-	struct mirror_set *ms;
-	uint32_t region_size;
-	unsigned region_shift;
-
-	/* holds persistent region state */
-	struct dm_dirty_log *log;
-
-	/* hash table */
-	rwlock_t hash_lock;
-	mempool_t *region_pool;
-	unsigned int mask;
-	unsigned int nr_buckets;
-	struct list_head *buckets;
-
-	spinlock_t region_lock;
-	atomic_t recovery_in_flight;
-	struct semaphore recovery_count;
-	struct list_head clean_regions;
-	struct list_head quiesced_regions;
-	struct list_head recovered_regions;
-	struct list_head failed_recovered_regions;
-};
-
-enum {
-	RH_CLEAN,
-	RH_DIRTY,
-	RH_NOSYNC,
-	RH_RECOVERING
-};
-
-struct region {
-	struct region_hash *rh;	/* FIXME: can we get rid of this ? */
-	region_t key;
-	int state;
-
-	struct list_head hash_list;
-	struct list_head list;
-
-	atomic_t pending;
-	struct bio_list delayed_bios;
-};
-
-
-/*-----------------------------------------------------------------
  * Mirror set structures.
  *---------------------------------------------------------------*/
 enum dm_raid1_error {
@@ -132,8 +51,7 @@
 struct mirror_set {
 	struct dm_target *ti;
 	struct list_head list;
-	struct region_hash rh;
-	struct dm_kcopyd_client *kcopyd_client;
+
 	uint64_t features;
 
 	spinlock_t lock;	/* protects the lists */
@@ -141,6 +59,8 @@
 	struct bio_list writes;
 	struct bio_list failures;
 
+	struct dm_region_hash *rh;
+	struct dm_kcopyd_client *kcopyd_client;
 	struct dm_io_client *io_client;
 	mempool_t *read_record_pool;
 
@@ -159,25 +79,14 @@
 
 	struct work_struct trigger_event;
 
-	unsigned int nr_mirrors;
+	unsigned nr_mirrors;
 	struct mirror mirror[0];
 };
 
-/*
- * Conversion fns
- */
-static inline region_t bio_to_region(struct region_hash *rh, struct bio *bio)
+static void wakeup_mirrord(void *context)
 {
-	return (bio->bi_sector - rh->ms->ti->begin) >> rh->region_shift;
-}
+	struct mirror_set *ms = context;
 
-static inline sector_t region_to_sector(struct region_hash *rh, region_t region)
-{
-	return region << rh->region_shift;
-}
-
-static void wake(struct mirror_set *ms)
-{
 	queue_work(ms->kmirrord_wq, &ms->kmirrord_work);
 }
 
@@ -186,7 +95,7 @@
 	struct mirror_set *ms = (struct mirror_set *) data;
 
 	clear_bit(0, &ms->timer_pending);
-	wake(ms);
+	wakeup_mirrord(ms);
 }
 
 static void delayed_wake(struct mirror_set *ms)
@@ -200,473 +109,34 @@
 	add_timer(&ms->timer);
 }
 
-/* FIXME move this */
-static void queue_bio(struct mirror_set *ms, struct bio *bio, int rw);
-
-#define MIN_REGIONS 64
-#define MAX_RECOVERY 1
-static int rh_init(struct region_hash *rh, struct mirror_set *ms,
-		   struct dm_dirty_log *log, uint32_t region_size,
-		   region_t nr_regions)
+static void wakeup_all_recovery_waiters(void *context)
 {
-	unsigned int nr_buckets, max_buckets;
-	size_t i;
-
-	/*
-	 * Calculate a suitable number of buckets for our hash
-	 * table.
-	 */
-	max_buckets = nr_regions >> 6;
-	for (nr_buckets = 128u; nr_buckets < max_buckets; nr_buckets <<= 1)
-		;
-	nr_buckets >>= 1;
-
-	rh->ms = ms;
-	rh->log = log;
-	rh->region_size = region_size;
-	rh->region_shift = ffs(region_size) - 1;
-	rwlock_init(&rh->hash_lock);
-	rh->mask = nr_buckets - 1;
-	rh->nr_buckets = nr_buckets;
-
-	rh->buckets = vmalloc(nr_buckets * sizeof(*rh->buckets));
-	if (!rh->buckets) {
-		DMERR("unable to allocate region hash memory");
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < nr_buckets; i++)
-		INIT_LIST_HEAD(rh->buckets + i);
-
-	spin_lock_init(&rh->region_lock);
-	sema_init(&rh->recovery_count, 0);
-	atomic_set(&rh->recovery_in_flight, 0);
-	INIT_LIST_HEAD(&rh->clean_regions);
-	INIT_LIST_HEAD(&rh->quiesced_regions);
-	INIT_LIST_HEAD(&rh->recovered_regions);
-	INIT_LIST_HEAD(&rh->failed_recovered_regions);
-
-	rh->region_pool = mempool_create_kmalloc_pool(MIN_REGIONS,
-						      sizeof(struct region));
-	if (!rh->region_pool) {
-		vfree(rh->buckets);
-		rh->buckets = NULL;
-		return -ENOMEM;
-	}
-
-	return 0;
+	wake_up_all(&_kmirrord_recovery_stopped);
 }
 
-static void rh_exit(struct region_hash *rh)
-{
-	unsigned int h;
-	struct region *reg, *nreg;
-
-	BUG_ON(!list_empty(&rh->quiesced_regions));
-	for (h = 0; h < rh->nr_buckets; h++) {
-		list_for_each_entry_safe(reg, nreg, rh->buckets + h, hash_list) {
-			BUG_ON(atomic_read(&reg->pending));
-			mempool_free(reg, rh->region_pool);
-		}
-	}
-
-	if (rh->log)
-		dm_dirty_log_destroy(rh->log);
-	if (rh->region_pool)
-		mempool_destroy(rh->region_pool);
-	vfree(rh->buckets);
-}
-
-#define RH_HASH_MULT 2654435387U
-
-static inline unsigned int rh_hash(struct region_hash *rh, region_t region)
-{
-	return (unsigned int) ((region * RH_HASH_MULT) >> 12) & rh->mask;
-}
-
-static struct region *__rh_lookup(struct region_hash *rh, region_t region)
-{
-	struct region *reg;
-
-	list_for_each_entry (reg, rh->buckets + rh_hash(rh, region), hash_list)
-		if (reg->key == region)
-			return reg;
-
-	return NULL;
-}
-
-static void __rh_insert(struct region_hash *rh, struct region *reg)
-{
-	unsigned int h = rh_hash(rh, reg->key);
-	list_add(&reg->hash_list, rh->buckets + h);
-}
-
-static struct region *__rh_alloc(struct region_hash *rh, region_t region)
-{
-	struct region *reg, *nreg;
-
-	read_unlock(&rh->hash_lock);
-	nreg = mempool_alloc(rh->region_pool, GFP_ATOMIC);
-	if (unlikely(!nreg))
-		nreg = kmalloc(sizeof(struct region), GFP_NOIO);
-	nreg->state = rh->log->type->in_sync(rh->log, region, 1) ?
-		RH_CLEAN : RH_NOSYNC;
-	nreg->rh = rh;
-	nreg->key = region;
-
-	INIT_LIST_HEAD(&nreg->list);
-
-	atomic_set(&nreg->pending, 0);
-	bio_list_init(&nreg->delayed_bios);
-	write_lock_irq(&rh->hash_lock);
-
-	reg = __rh_lookup(rh, region);
-	if (reg)
-		/* we lost the race */
-		mempool_free(nreg, rh->region_pool);
-
-	else {
-		__rh_insert(rh, nreg);
-		if (nreg->state == RH_CLEAN) {
-			spin_lock(&rh->region_lock);
-			list_add(&nreg->list, &rh->clean_regions);
-			spin_unlock(&rh->region_lock);
-		}
-		reg = nreg;
-	}
-	write_unlock_irq(&rh->hash_lock);
-	read_lock(&rh->hash_lock);
-
-	return reg;
-}
-
-static inline struct region *__rh_find(struct region_hash *rh, region_t region)
-{
-	struct region *reg;
-
-	reg = __rh_lookup(rh, region);
-	if (!reg)
-		reg = __rh_alloc(rh, region);
-
-	return reg;
-}
-
-static int rh_state(struct region_hash *rh, region_t region, int may_block)
-{
-	int r;
-	struct region *reg;
-
-	read_lock(&rh->hash_lock);
-	reg = __rh_lookup(rh, region);
-	read_unlock(&rh->hash_lock);
-
-	if (reg)
-		return reg->state;
-
-	/*
-	 * The region wasn't in the hash, so we fall back to the
-	 * dirty log.
-	 */
-	r = rh->log->type->in_sync(rh->log, region, may_block);
-
-	/*
-	 * Any error from the dirty log (eg. -EWOULDBLOCK) gets
-	 * taken as a RH_NOSYNC
-	 */
-	return r == 1 ? RH_CLEAN : RH_NOSYNC;
-}
-
-static inline int rh_in_sync(struct region_hash *rh,
-			     region_t region, int may_block)
-{
-	int state = rh_state(rh, region, may_block);
-	return state == RH_CLEAN || state == RH_DIRTY;
-}
-
-static void dispatch_bios(struct mirror_set *ms, struct bio_list *bio_list)
-{
-	struct bio *bio;
-
-	while ((bio = bio_list_pop(bio_list))) {
-		queue_bio(ms, bio, WRITE);
-	}
-}
-
-static void complete_resync_work(struct region *reg, int success)
-{
-	struct region_hash *rh = reg->rh;
-
-	rh->log->type->set_region_sync(rh->log, reg->key, success);
-
-	/*
-	 * Dispatch the bios before we call 'wake_up_all'.
-	 * This is important because if we are suspending,
-	 * we want to know that recovery is complete and
-	 * the work queue is flushed.  If we wake_up_all
-	 * before we dispatch_bios (queue bios and call wake()),
-	 * then we risk suspending before the work queue
-	 * has been properly flushed.
-	 */
-	dispatch_bios(rh->ms, &reg->delayed_bios);
-	if (atomic_dec_and_test(&rh->recovery_in_flight))
-		wake_up_all(&_kmirrord_recovery_stopped);
-	up(&rh->recovery_count);
-}
-
-static void rh_update_states(struct region_hash *rh)
-{
-	struct region *reg, *next;
-
-	LIST_HEAD(clean);
-	LIST_HEAD(recovered);
-	LIST_HEAD(failed_recovered);
-
-	/*
-	 * Quickly grab the lists.
-	 */
-	write_lock_irq(&rh->hash_lock);
-	spin_lock(&rh->region_lock);
-	if (!list_empty(&rh->clean_regions)) {
-		list_splice_init(&rh->clean_regions, &clean);
-
-		list_for_each_entry(reg, &clean, list)
-			list_del(&reg->hash_list);
-	}
-
-	if (!list_empty(&rh->recovered_regions)) {
-		list_splice_init(&rh->recovered_regions, &recovered);
-
-		list_for_each_entry (reg, &recovered, list)
-			list_del(&reg->hash_list);
-	}
-
-	if (!list_empty(&rh->failed_recovered_regions)) {
-		list_splice_init(&rh->failed_recovered_regions,
-				 &failed_recovered);
-
-		list_for_each_entry(reg, &failed_recovered, list)
-			list_del(&reg->hash_list);
-	}
-
-	spin_unlock(&rh->region_lock);
-	write_unlock_irq(&rh->hash_lock);
-
-	/*
-	 * All the regions on the recovered and clean lists have
-	 * now been pulled out of the system, so no need to do
-	 * any more locking.
-	 */
-	list_for_each_entry_safe (reg, next, &recovered, list) {
-		rh->log->type->clear_region(rh->log, reg->key);
-		complete_resync_work(reg, 1);
-		mempool_free(reg, rh->region_pool);
-	}
-
-	list_for_each_entry_safe(reg, next, &failed_recovered, list) {
-		complete_resync_work(reg, errors_handled(rh->ms) ? 0 : 1);
-		mempool_free(reg, rh->region_pool);
-	}
-
-	list_for_each_entry_safe(reg, next, &clean, list) {
-		rh->log->type->clear_region(rh->log, reg->key);
-		mempool_free(reg, rh->region_pool);
-	}
-
-	rh->log->type->flush(rh->log);
-}
-
-static void rh_inc(struct region_hash *rh, region_t region)
-{
-	struct region *reg;
-
-	read_lock(&rh->hash_lock);
-	reg = __rh_find(rh, region);
-
-	spin_lock_irq(&rh->region_lock);
-	atomic_inc(&reg->pending);
-
-	if (reg->state == RH_CLEAN) {
-		reg->state = RH_DIRTY;
-		list_del_init(&reg->list);	/* take off the clean list */
-		spin_unlock_irq(&rh->region_lock);
-
-		rh->log->type->mark_region(rh->log, reg->key);
-	} else
-		spin_unlock_irq(&rh->region_lock);
-
-
-	read_unlock(&rh->hash_lock);
-}
-
-static void rh_inc_pending(struct region_hash *rh, struct bio_list *bios)
-{
-	struct bio *bio;
-
-	for (bio = bios->head; bio; bio = bio->bi_next)
-		rh_inc(rh, bio_to_region(rh, bio));
-}
-
-static void rh_dec(struct region_hash *rh, region_t region)
+static void queue_bio(struct mirror_set *ms, struct bio *bio, int rw)
 {
 	unsigned long flags;
-	struct region *reg;
 	int should_wake = 0;
+	struct bio_list *bl;
 
-	read_lock(&rh->hash_lock);
-	reg = __rh_lookup(rh, region);
-	read_unlock(&rh->hash_lock);
-
-	spin_lock_irqsave(&rh->region_lock, flags);
-	if (atomic_dec_and_test(&reg->pending)) {
-		/*
-		 * There is no pending I/O for this region.
-		 * We can move the region to corresponding list for next action.
-		 * At this point, the region is not yet connected to any list.
-		 *
-		 * If the state is RH_NOSYNC, the region should be kept off
-		 * from clean list.
-		 * The hash entry for RH_NOSYNC will remain in memory
-		 * until the region is recovered or the map is reloaded.
-		 */
-
-		/* do nothing for RH_NOSYNC */
-		if (reg->state == RH_RECOVERING) {
-			list_add_tail(&reg->list, &rh->quiesced_regions);
-		} else if (reg->state == RH_DIRTY) {
-			reg->state = RH_CLEAN;
-			list_add(&reg->list, &rh->clean_regions);
-		}
-		should_wake = 1;
-	}
-	spin_unlock_irqrestore(&rh->region_lock, flags);
+	bl = (rw == WRITE) ? &ms->writes : &ms->reads;
+	spin_lock_irqsave(&ms->lock, flags);
+	should_wake = !(bl->head);
+	bio_list_add(bl, bio);
+	spin_unlock_irqrestore(&ms->lock, flags);
 
 	if (should_wake)
-		wake(rh->ms);
+		wakeup_mirrord(ms);
 }
 
-/*
- * Starts quiescing a region in preparation for recovery.
- */
-static int __rh_recovery_prepare(struct region_hash *rh)
+static void dispatch_bios(void *context, struct bio_list *bio_list)
 {
-	int r;
-	struct region *reg;
-	region_t region;
+	struct mirror_set *ms = context;
+	struct bio *bio;
 
-	/*
-	 * Ask the dirty log what's next.
-	 */
-	r = rh->log->type->get_resync_work(rh->log, &region);
-	if (r <= 0)
-		return r;
-
-	/*
-	 * Get this region, and start it quiescing by setting the
-	 * recovering flag.
-	 */
-	read_lock(&rh->hash_lock);
-	reg = __rh_find(rh, region);
-	read_unlock(&rh->hash_lock);
-
-	spin_lock_irq(&rh->region_lock);
-	reg->state = RH_RECOVERING;
-
-	/* Already quiesced ? */
-	if (atomic_read(&reg->pending))
-		list_del_init(&reg->list);
-	else
-		list_move(&reg->list, &rh->quiesced_regions);
-
-	spin_unlock_irq(&rh->region_lock);
-
-	return 1;
-}
-
-static void rh_recovery_prepare(struct region_hash *rh)
-{
-	/* Extra reference to avoid race with rh_stop_recovery */
-	atomic_inc(&rh->recovery_in_flight);
-
-	while (!down_trylock(&rh->recovery_count)) {
-		atomic_inc(&rh->recovery_in_flight);
-		if (__rh_recovery_prepare(rh) <= 0) {
-			atomic_dec(&rh->recovery_in_flight);
-			up(&rh->recovery_count);
-			break;
-		}
-	}
-
-	/* Drop the extra reference */
-	if (atomic_dec_and_test(&rh->recovery_in_flight))
-		wake_up_all(&_kmirrord_recovery_stopped);
-}
-
-/*
- * Returns any quiesced regions.
- */
-static struct region *rh_recovery_start(struct region_hash *rh)
-{
-	struct region *reg = NULL;
-
-	spin_lock_irq(&rh->region_lock);
-	if (!list_empty(&rh->quiesced_regions)) {
-		reg = list_entry(rh->quiesced_regions.next,
-				 struct region, list);
-		list_del_init(&reg->list);	/* remove from the quiesced list */
-	}
-	spin_unlock_irq(&rh->region_lock);
-
-	return reg;
-}
-
-static void rh_recovery_end(struct region *reg, int success)
-{
-	struct region_hash *rh = reg->rh;
-
-	spin_lock_irq(&rh->region_lock);
-	if (success)
-		list_add(&reg->list, &reg->rh->recovered_regions);
-	else {
-		reg->state = RH_NOSYNC;
-		list_add(&reg->list, &reg->rh->failed_recovered_regions);
-	}
-	spin_unlock_irq(&rh->region_lock);
-
-	wake(rh->ms);
-}
-
-static int rh_flush(struct region_hash *rh)
-{
-	return rh->log->type->flush(rh->log);
-}
-
-static void rh_delay(struct region_hash *rh, struct bio *bio)
-{
-	struct region *reg;
-
-	read_lock(&rh->hash_lock);
-	reg = __rh_find(rh, bio_to_region(rh, bio));
-	bio_list_add(&reg->delayed_bios, bio);
-	read_unlock(&rh->hash_lock);
-}
-
-static void rh_stop_recovery(struct region_hash *rh)
-{
-	int i;
-
-	/* wait for any recovering regions */
-	for (i = 0; i < MAX_RECOVERY; i++)
-		down(&rh->recovery_count);
-}
-
-static void rh_start_recovery(struct region_hash *rh)
-{
-	int i;
-
-	for (i = 0; i < MAX_RECOVERY; i++)
-		up(&rh->recovery_count);
-
-	wake(rh->ms);
+	while ((bio = bio_list_pop(bio_list)))
+		queue_bio(ms, bio, WRITE);
 }
 
 #define MIN_READ_RECORDS 20
@@ -776,8 +246,8 @@
 static void recovery_complete(int read_err, unsigned long write_err,
 			      void *context)
 {
-	struct region *reg = (struct region *)context;
-	struct mirror_set *ms = reg->rh->ms;
+	struct dm_region *reg = context;
+	struct mirror_set *ms = dm_rh_region_context(reg);
 	int m, bit = 0;
 
 	if (read_err) {
@@ -803,31 +273,33 @@
 		}
 	}
 
-	rh_recovery_end(reg, !(read_err || write_err));
+	dm_rh_recovery_end(reg, !(read_err || write_err));
 }
 
-static int recover(struct mirror_set *ms, struct region *reg)
+static int recover(struct mirror_set *ms, struct dm_region *reg)
 {
 	int r;
-	unsigned int i;
+	unsigned i;
 	struct dm_io_region from, to[DM_KCOPYD_MAX_REGIONS], *dest;
 	struct mirror *m;
 	unsigned long flags = 0;
+	region_t key = dm_rh_get_region_key(reg);
+	sector_t region_size = dm_rh_get_region_size(ms->rh);
 
 	/* fill in the source */
 	m = get_default_mirror(ms);
 	from.bdev = m->dev->bdev;
-	from.sector = m->offset + region_to_sector(reg->rh, reg->key);
-	if (reg->key == (ms->nr_regions - 1)) {
+	from.sector = m->offset + dm_rh_region_to_sector(ms->rh, key);
+	if (key == (ms->nr_regions - 1)) {
 		/*
 		 * The final region may be smaller than
 		 * region_size.
 		 */
-		from.count = ms->ti->len & (reg->rh->region_size - 1);
+		from.count = ms->ti->len & (region_size - 1);
 		if (!from.count)
-			from.count = reg->rh->region_size;
+			from.count = region_size;
 	} else
-		from.count = reg->rh->region_size;
+		from.count = region_size;
 
 	/* fill in the destinations */
 	for (i = 0, dest = to; i < ms->nr_mirrors; i++) {
@@ -836,7 +308,7 @@
 
 		m = ms->mirror + i;
 		dest->bdev = m->dev->bdev;
-		dest->sector = m->offset + region_to_sector(reg->rh, reg->key);
+		dest->sector = m->offset + dm_rh_region_to_sector(ms->rh, key);
 		dest->count = from.count;
 		dest++;
 	}
@@ -853,22 +325,22 @@
 
 static void do_recovery(struct mirror_set *ms)
 {
+	struct dm_region *reg;
+	struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh);
 	int r;
-	struct region *reg;
-	struct dm_dirty_log *log = ms->rh.log;
 
 	/*
 	 * Start quiescing some regions.
 	 */
-	rh_recovery_prepare(&ms->rh);
+	dm_rh_recovery_prepare(ms->rh);
 
 	/*
 	 * Copy any already quiesced regions.
 	 */
-	while ((reg = rh_recovery_start(&ms->rh))) {
+	while ((reg = dm_rh_recovery_start(ms->rh))) {
 		r = recover(ms, reg);
 		if (r)
-			rh_recovery_end(reg, 0);
+			dm_rh_recovery_end(reg, 0);
 	}
 
 	/*
@@ -909,9 +381,10 @@
 
 static int mirror_available(struct mirror_set *ms, struct bio *bio)
 {
-	region_t region = bio_to_region(&ms->rh, bio);
+	struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh);
+	region_t region = dm_rh_bio_to_region(ms->rh, bio);
 
-	if (ms->rh.log->type->in_sync(ms->rh.log, region, 0))
+	if (log->type->in_sync(log, region, 0))
 		return choose_mirror(ms,  bio->bi_sector) ? 1 : 0;
 
 	return 0;
@@ -985,7 +458,14 @@
 
 	map_region(&io, m, bio);
 	bio_set_m(bio, m);
-	(void) dm_io(&io_req, 1, &io, NULL);
+	BUG_ON(dm_io(&io_req, 1, &io, NULL));
+}
+
+static inline int region_in_sync(struct mirror_set *ms, region_t region,
+				 int may_block)
+{
+	int state = dm_rh_get_state(ms->rh, region, may_block);
+	return state == DM_RH_CLEAN || state == DM_RH_DIRTY;
 }
 
 static void do_reads(struct mirror_set *ms, struct bio_list *reads)
@@ -995,13 +475,13 @@
 	struct mirror *m;
 
 	while ((bio = bio_list_pop(reads))) {
-		region = bio_to_region(&ms->rh, bio);
+		region = dm_rh_bio_to_region(ms->rh, bio);
 		m = get_default_mirror(ms);
 
 		/*
 		 * We can only read balance if the region is in sync.
 		 */
-		if (likely(rh_in_sync(&ms->rh, region, 1)))
+		if (likely(region_in_sync(ms, region, 1)))
 			m = choose_mirror(ms, bio->bi_sector);
 		else if (m && atomic_read(&m->error_count))
 			m = NULL;
@@ -1024,57 +504,6 @@
  * NOSYNC:	increment pending, just write to the default mirror
  *---------------------------------------------------------------*/
 
-/* __bio_mark_nosync
- * @ms
- * @bio
- * @done
- * @error
- *
- * The bio was written on some mirror(s) but failed on other mirror(s).
- * We can successfully endio the bio but should avoid the region being
- * marked clean by setting the state RH_NOSYNC.
- *
- * This function is _not_ safe in interrupt context!
- */
-static void __bio_mark_nosync(struct mirror_set *ms,
-			      struct bio *bio, unsigned done, int error)
-{
-	unsigned long flags;
-	struct region_hash *rh = &ms->rh;
-	struct dm_dirty_log *log = ms->rh.log;
-	struct region *reg;
-	region_t region = bio_to_region(rh, bio);
-	int recovering = 0;
-
-	/* We must inform the log that the sync count has changed. */
-	log->type->set_region_sync(log, region, 0);
-	ms->in_sync = 0;
-
-	read_lock(&rh->hash_lock);
-	reg = __rh_find(rh, region);
-	read_unlock(&rh->hash_lock);
-
-	/* region hash entry should exist because write was in-flight */
-	BUG_ON(!reg);
-	BUG_ON(!list_empty(&reg->list));
-
-	spin_lock_irqsave(&rh->region_lock, flags);
-	/*
-	 * Possible cases:
-	 *   1) RH_DIRTY
-	 *   2) RH_NOSYNC: was dirty, other preceeding writes failed
-	 *   3) RH_RECOVERING: flushing pending writes
-	 * Either case, the region should have not been connected to list.
-	 */
-	recovering = (reg->state == RH_RECOVERING);
-	reg->state = RH_NOSYNC;
-	BUG_ON(!list_empty(&reg->list));
-	spin_unlock_irqrestore(&rh->region_lock, flags);
-
-	bio_endio(bio, error);
-	if (recovering)
-		complete_resync_work(reg, 0);
-}
 
 static void write_callback(unsigned long error, void *context)
 {
@@ -1119,7 +548,7 @@
 		bio_list_add(&ms->failures, bio);
 		spin_unlock_irqrestore(&ms->lock, flags);
 		if (should_wake)
-			wake(ms);
+			wakeup_mirrord(ms);
 		return;
 	}
 out:
@@ -1149,7 +578,7 @@
 	 */
 	bio_set_m(bio, get_default_mirror(ms));
 
-	(void) dm_io(&io_req, ms->nr_mirrors, io, NULL);
+	BUG_ON(dm_io(&io_req, ms->nr_mirrors, io, NULL));
 }
 
 static void do_writes(struct mirror_set *ms, struct bio_list *writes)
@@ -1169,18 +598,19 @@
 	bio_list_init(&recover);
 
 	while ((bio = bio_list_pop(writes))) {
-		state = rh_state(&ms->rh, bio_to_region(&ms->rh, bio), 1);
+		state = dm_rh_get_state(ms->rh,
+					dm_rh_bio_to_region(ms->rh, bio), 1);
 		switch (state) {
-		case RH_CLEAN:
-		case RH_DIRTY:
+		case DM_RH_CLEAN:
+		case DM_RH_DIRTY:
 			this_list = &sync;
 			break;
 
-		case RH_NOSYNC:
+		case DM_RH_NOSYNC:
 			this_list = &nosync;
 			break;
 
-		case RH_RECOVERING:
+		case DM_RH_RECOVERING:
 			this_list = &recover;
 			break;
 		}
@@ -1193,9 +623,9 @@
 	 * be written to (writes to recover regions are going to
 	 * be delayed).
 	 */
-	rh_inc_pending(&ms->rh, &sync);
-	rh_inc_pending(&ms->rh, &nosync);
-	ms->log_failure = rh_flush(&ms->rh) ? 1 : 0;
+	dm_rh_inc_pending(ms->rh, &sync);
+	dm_rh_inc_pending(ms->rh, &nosync);
+	ms->log_failure = dm_rh_flush(ms->rh) ? 1 : 0;
 
 	/*
 	 * Dispatch io.
@@ -1204,13 +634,13 @@
 		spin_lock_irq(&ms->lock);
 		bio_list_merge(&ms->failures, &sync);
 		spin_unlock_irq(&ms->lock);
-		wake(ms);
+		wakeup_mirrord(ms);
 	} else
 		while ((bio = bio_list_pop(&sync)))
 			do_write(ms, bio);
 
 	while ((bio = bio_list_pop(&recover)))
-		rh_delay(&ms->rh, bio);
+		dm_rh_delay(ms->rh, bio);
 
 	while ((bio = bio_list_pop(&nosync))) {
 		map_bio(get_default_mirror(ms), bio);
@@ -1227,7 +657,8 @@
 
 	if (!ms->log_failure) {
 		while ((bio = bio_list_pop(failures)))
-			__bio_mark_nosync(ms, bio, bio->bi_size, 0);
+			ms->in_sync = 0;
+			dm_rh_mark_nosync(ms->rh, bio, bio->bi_size, 0);
 		return;
 	}
 
@@ -1280,8 +711,8 @@
  *---------------------------------------------------------------*/
 static void do_mirror(struct work_struct *work)
 {
-	struct mirror_set *ms =container_of(work, struct mirror_set,
-					    kmirrord_work);
+	struct mirror_set *ms = container_of(work, struct mirror_set,
+					     kmirrord_work);
 	struct bio_list reads, writes, failures;
 	unsigned long flags;
 
@@ -1294,7 +725,7 @@
 	bio_list_init(&ms->failures);
 	spin_unlock_irqrestore(&ms->lock, flags);
 
-	rh_update_states(&ms->rh);
+	dm_rh_update_states(ms->rh, errors_handled(ms));
 	do_recovery(ms);
 	do_reads(ms, &reads);
 	do_writes(ms, &writes);
@@ -1303,7 +734,6 @@
 	dm_table_unplug_all(ms->ti->table);
 }
 
-
 /*-----------------------------------------------------------------
  * Target functions
  *---------------------------------------------------------------*/
@@ -1315,9 +745,6 @@
 	size_t len;
 	struct mirror_set *ms = NULL;
 
-	if (array_too_big(sizeof(*ms), sizeof(ms->mirror[0]), nr_mirrors))
-		return NULL;
-
 	len = sizeof(*ms) + (sizeof(ms->mirror[0]) * nr_mirrors);
 
 	ms = kzalloc(len, GFP_KERNEL);
@@ -1353,7 +780,11 @@
  		return NULL;
 	}
 
-	if (rh_init(&ms->rh, ms, dl, region_size, ms->nr_regions)) {
+	ms->rh = dm_region_hash_create(ms, dispatch_bios, wakeup_mirrord,
+				       wakeup_all_recovery_waiters,
+				       ms->ti->begin, MAX_RECOVERY,
+				       dl, region_size, ms->nr_regions);
+	if (IS_ERR(ms->rh)) {
 		ti->error = "Error creating dirty region hash";
 		dm_io_client_destroy(ms->io_client);
 		mempool_destroy(ms->read_record_pool);
@@ -1371,7 +802,7 @@
 		dm_put_device(ti, ms->mirror[m].dev);
 
 	dm_io_client_destroy(ms->io_client);
-	rh_exit(&ms->rh);
+	dm_region_hash_destroy(ms->rh);
 	mempool_destroy(ms->read_record_pool);
 	kfree(ms);
 }
@@ -1411,10 +842,10 @@
  * Create dirty log: log_type #log_params <log_params>
  */
 static struct dm_dirty_log *create_dirty_log(struct dm_target *ti,
-					  unsigned int argc, char **argv,
-					  unsigned int *args_used)
+					     unsigned argc, char **argv,
+					     unsigned *args_used)
 {
-	unsigned int param_count;
+	unsigned param_count;
 	struct dm_dirty_log *dl;
 
 	if (argc < 2) {
@@ -1545,7 +976,7 @@
 	}
 
 	ti->private = ms;
- 	ti->split_io = ms->rh.region_size;
+	ti->split_io = dm_rh_get_region_size(ms->rh);
 
 	ms->kmirrord_wq = create_singlethread_workqueue("kmirrord");
 	if (!ms->kmirrord_wq) {
@@ -1580,11 +1011,11 @@
 		goto err_destroy_wq;
 	}
 
-	r = dm_kcopyd_client_create(DM_IO_PAGES, &ms->kcopyd_client);
+	r = dm_kcopyd_client_create(DM_KCOPYD_PAGES, &ms->kcopyd_client);
 	if (r)
 		goto err_destroy_wq;
 
-	wake(ms);
+	wakeup_mirrord(ms);
 	return 0;
 
 err_destroy_wq:
@@ -1605,22 +1036,6 @@
 	free_context(ms, ti, ms->nr_mirrors);
 }
 
-static void queue_bio(struct mirror_set *ms, struct bio *bio, int rw)
-{
-	unsigned long flags;
-	int should_wake = 0;
-	struct bio_list *bl;
-
-	bl = (rw == WRITE) ? &ms->writes : &ms->reads;
-	spin_lock_irqsave(&ms->lock, flags);
-	should_wake = !(bl->head);
-	bio_list_add(bl, bio);
-	spin_unlock_irqrestore(&ms->lock, flags);
-
-	if (should_wake)
-		wake(ms);
-}
-
 /*
  * Mirror mapping function
  */
@@ -1631,16 +1046,16 @@
 	struct mirror *m;
 	struct mirror_set *ms = ti->private;
 	struct dm_raid1_read_record *read_record = NULL;
+	struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh);
 
 	if (rw == WRITE) {
 		/* Save region for mirror_end_io() handler */
-		map_context->ll = bio_to_region(&ms->rh, bio);
+		map_context->ll = dm_rh_bio_to_region(ms->rh, bio);
 		queue_bio(ms, bio, rw);
 		return DM_MAPIO_SUBMITTED;
 	}
 
-	r = ms->rh.log->type->in_sync(ms->rh.log,
-				      bio_to_region(&ms->rh, bio), 0);
+	r = log->type->in_sync(log, dm_rh_bio_to_region(ms->rh, bio), 0);
 	if (r < 0 && r != -EWOULDBLOCK)
 		return r;
 
@@ -1688,7 +1103,7 @@
 	 * We need to dec pending if this was a write.
 	 */
 	if (rw == WRITE) {
-		rh_dec(&ms->rh, map_context->ll);
+		dm_rh_dec(ms->rh, map_context->ll);
 		return error;
 	}
 
@@ -1744,7 +1159,7 @@
 static void mirror_presuspend(struct dm_target *ti)
 {
 	struct mirror_set *ms = (struct mirror_set *) ti->private;
-	struct dm_dirty_log *log = ms->rh.log;
+	struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh);
 
 	atomic_set(&ms->suspend, 1);
 
@@ -1752,10 +1167,10 @@
 	 * We must finish up all the work that we've
 	 * generated (i.e. recovery work).
 	 */
-	rh_stop_recovery(&ms->rh);
+	dm_rh_stop_recovery(ms->rh);
 
 	wait_event(_kmirrord_recovery_stopped,
-		   !atomic_read(&ms->rh.recovery_in_flight));
+		   !dm_rh_recovery_in_flight(ms->rh));
 
 	if (log->type->presuspend && log->type->presuspend(log))
 		/* FIXME: need better error handling */
@@ -1773,7 +1188,7 @@
 static void mirror_postsuspend(struct dm_target *ti)
 {
 	struct mirror_set *ms = ti->private;
-	struct dm_dirty_log *log = ms->rh.log;
+	struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh);
 
 	if (log->type->postsuspend && log->type->postsuspend(log))
 		/* FIXME: need better error handling */
@@ -1783,13 +1198,13 @@
 static void mirror_resume(struct dm_target *ti)
 {
 	struct mirror_set *ms = ti->private;
-	struct dm_dirty_log *log = ms->rh.log;
+	struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh);
 
 	atomic_set(&ms->suspend, 0);
 	if (log->type->resume && log->type->resume(log))
 		/* FIXME: need better error handling */
 		DMWARN("log resume failed");
-	rh_start_recovery(&ms->rh);
+	dm_rh_start_recovery(ms->rh);
 }
 
 /*
@@ -1821,7 +1236,7 @@
 {
 	unsigned int m, sz = 0;
 	struct mirror_set *ms = (struct mirror_set *) ti->private;
-	struct dm_dirty_log *log = ms->rh.log;
+	struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh);
 	char buffer[ms->nr_mirrors + 1];
 
 	switch (type) {
@@ -1834,15 +1249,15 @@
 		buffer[m] = '\0';
 
 		DMEMIT("%llu/%llu 1 %s ",
-		      (unsigned long long)log->type->get_sync_count(ms->rh.log),
+		      (unsigned long long)log->type->get_sync_count(log),
 		      (unsigned long long)ms->nr_regions, buffer);
 
-		sz += log->type->status(ms->rh.log, type, result+sz, maxlen-sz);
+		sz += log->type->status(log, type, result+sz, maxlen-sz);
 
 		break;
 
 	case STATUSTYPE_TABLE:
-		sz = log->type->status(ms->rh.log, type, result, maxlen);
+		sz = log->type->status(log, type, result, maxlen);
 
 		DMEMIT("%d", ms->nr_mirrors);
 		for (m = 0; m < ms->nr_mirrors; m++)
diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c
new file mode 100644
index 0000000..59f8d9d
--- /dev/null
+++ b/drivers/md/dm-region-hash.c
@@ -0,0 +1,704 @@
+/*
+ * Copyright (C) 2003 Sistina Software Limited.
+ * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
+ *
+ * This file is released under the GPL.
+ */
+
+#include <linux/dm-dirty-log.h>
+#include <linux/dm-region-hash.h>
+
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/vmalloc.h>
+
+#include "dm.h"
+#include "dm-bio-list.h"
+
+#define	DM_MSG_PREFIX	"region hash"
+
+/*-----------------------------------------------------------------
+ * Region hash
+ *
+ * The mirror splits itself up into discrete regions.  Each
+ * region can be in one of three states: clean, dirty,
+ * nosync.  There is no need to put clean regions in the hash.
+ *
+ * In addition to being present in the hash table a region _may_
+ * be present on one of three lists.
+ *
+ *   clean_regions: Regions on this list have no io pending to
+ *   them, they are in sync, we are no longer interested in them,
+ *   they are dull.  dm_rh_update_states() will remove them from the
+ *   hash table.
+ *
+ *   quiesced_regions: These regions have been spun down, ready
+ *   for recovery.  rh_recovery_start() will remove regions from
+ *   this list and hand them to kmirrord, which will schedule the
+ *   recovery io with kcopyd.
+ *
+ *   recovered_regions: Regions that kcopyd has successfully
+ *   recovered.  dm_rh_update_states() will now schedule any delayed
+ *   io, up the recovery_count, and remove the region from the
+ *   hash.
+ *
+ * There are 2 locks:
+ *   A rw spin lock 'hash_lock' protects just the hash table,
+ *   this is never held in write mode from interrupt context,
+ *   which I believe means that we only have to disable irqs when
+ *   doing a write lock.
+ *
+ *   An ordinary spin lock 'region_lock' that protects the three
+ *   lists in the region_hash, with the 'state', 'list' and
+ *   'delayed_bios' fields of the regions.  This is used from irq
+ *   context, so all other uses will have to suspend local irqs.
+ *---------------------------------------------------------------*/
+struct dm_region_hash {
+	uint32_t region_size;
+	unsigned region_shift;
+
+	/* holds persistent region state */
+	struct dm_dirty_log *log;
+
+	/* hash table */
+	rwlock_t hash_lock;
+	mempool_t *region_pool;
+	unsigned mask;
+	unsigned nr_buckets;
+	unsigned prime;
+	unsigned shift;
+	struct list_head *buckets;
+
+	unsigned max_recovery; /* Max # of regions to recover in parallel */
+
+	spinlock_t region_lock;
+	atomic_t recovery_in_flight;
+	struct semaphore recovery_count;
+	struct list_head clean_regions;
+	struct list_head quiesced_regions;
+	struct list_head recovered_regions;
+	struct list_head failed_recovered_regions;
+
+	void *context;
+	sector_t target_begin;
+
+	/* Callback function to schedule bios writes */
+	void (*dispatch_bios)(void *context, struct bio_list *bios);
+
+	/* Callback function to wakeup callers worker thread. */
+	void (*wakeup_workers)(void *context);
+
+	/* Callback function to wakeup callers recovery waiters. */
+	void (*wakeup_all_recovery_waiters)(void *context);
+};
+
+struct dm_region {
+	struct dm_region_hash *rh;	/* FIXME: can we get rid of this ? */
+	region_t key;
+	int state;
+
+	struct list_head hash_list;
+	struct list_head list;
+
+	atomic_t pending;
+	struct bio_list delayed_bios;
+};
+
+/*
+ * Conversion fns
+ */
+static region_t dm_rh_sector_to_region(struct dm_region_hash *rh, sector_t sector)
+{
+	return sector >> rh->region_shift;
+}
+
+sector_t dm_rh_region_to_sector(struct dm_region_hash *rh, region_t region)
+{
+	return region << rh->region_shift;
+}
+EXPORT_SYMBOL_GPL(dm_rh_region_to_sector);
+
+region_t dm_rh_bio_to_region(struct dm_region_hash *rh, struct bio *bio)
+{
+	return dm_rh_sector_to_region(rh, bio->bi_sector - rh->target_begin);
+}
+EXPORT_SYMBOL_GPL(dm_rh_bio_to_region);
+
+void *dm_rh_region_context(struct dm_region *reg)
+{
+	return reg->rh->context;
+}
+EXPORT_SYMBOL_GPL(dm_rh_region_context);
+
+region_t dm_rh_get_region_key(struct dm_region *reg)
+{
+	return reg->key;
+}
+EXPORT_SYMBOL_GPL(dm_rh_get_region_key);
+
+sector_t dm_rh_get_region_size(struct dm_region_hash *rh)
+{
+	return rh->region_size;
+}
+EXPORT_SYMBOL_GPL(dm_rh_get_region_size);
+
+/*
+ * FIXME: shall we pass in a structure instead of all these args to
+ * dm_region_hash_create()????
+ */
+#define RH_HASH_MULT 2654435387U
+#define RH_HASH_SHIFT 12
+
+#define MIN_REGIONS 64
+struct dm_region_hash *dm_region_hash_create(
+		void *context, void (*dispatch_bios)(void *context,
+						     struct bio_list *bios),
+		void (*wakeup_workers)(void *context),
+		void (*wakeup_all_recovery_waiters)(void *context),
+		sector_t target_begin, unsigned max_recovery,
+		struct dm_dirty_log *log, uint32_t region_size,
+		region_t nr_regions)
+{
+	struct dm_region_hash *rh;
+	unsigned nr_buckets, max_buckets;
+	size_t i;
+
+	/*
+	 * Calculate a suitable number of buckets for our hash
+	 * table.
+	 */
+	max_buckets = nr_regions >> 6;
+	for (nr_buckets = 128u; nr_buckets < max_buckets; nr_buckets <<= 1)
+		;
+	nr_buckets >>= 1;
+
+	rh = kmalloc(sizeof(*rh), GFP_KERNEL);
+	if (!rh) {
+		DMERR("unable to allocate region hash memory");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	rh->context = context;
+	rh->dispatch_bios = dispatch_bios;
+	rh->wakeup_workers = wakeup_workers;
+	rh->wakeup_all_recovery_waiters = wakeup_all_recovery_waiters;
+	rh->target_begin = target_begin;
+	rh->max_recovery = max_recovery;
+	rh->log = log;
+	rh->region_size = region_size;
+	rh->region_shift = ffs(region_size) - 1;
+	rwlock_init(&rh->hash_lock);
+	rh->mask = nr_buckets - 1;
+	rh->nr_buckets = nr_buckets;
+
+	rh->shift = RH_HASH_SHIFT;
+	rh->prime = RH_HASH_MULT;
+
+	rh->buckets = vmalloc(nr_buckets * sizeof(*rh->buckets));
+	if (!rh->buckets) {
+		DMERR("unable to allocate region hash bucket memory");
+		kfree(rh);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	for (i = 0; i < nr_buckets; i++)
+		INIT_LIST_HEAD(rh->buckets + i);
+
+	spin_lock_init(&rh->region_lock);
+	sema_init(&rh->recovery_count, 0);
+	atomic_set(&rh->recovery_in_flight, 0);
+	INIT_LIST_HEAD(&rh->clean_regions);
+	INIT_LIST_HEAD(&rh->quiesced_regions);
+	INIT_LIST_HEAD(&rh->recovered_regions);
+	INIT_LIST_HEAD(&rh->failed_recovered_regions);
+
+	rh->region_pool = mempool_create_kmalloc_pool(MIN_REGIONS,
+						      sizeof(struct dm_region));
+	if (!rh->region_pool) {
+		vfree(rh->buckets);
+		kfree(rh);
+		rh = ERR_PTR(-ENOMEM);
+	}
+
+	return rh;
+}
+EXPORT_SYMBOL_GPL(dm_region_hash_create);
+
+void dm_region_hash_destroy(struct dm_region_hash *rh)
+{
+	unsigned h;
+	struct dm_region *reg, *nreg;
+
+	BUG_ON(!list_empty(&rh->quiesced_regions));
+	for (h = 0; h < rh->nr_buckets; h++) {
+		list_for_each_entry_safe(reg, nreg, rh->buckets + h,
+					 hash_list) {
+			BUG_ON(atomic_read(&reg->pending));
+			mempool_free(reg, rh->region_pool);
+		}
+	}
+
+	if (rh->log)
+		dm_dirty_log_destroy(rh->log);
+
+	if (rh->region_pool)
+		mempool_destroy(rh->region_pool);
+
+	vfree(rh->buckets);
+	kfree(rh);
+}
+EXPORT_SYMBOL_GPL(dm_region_hash_destroy);
+
+struct dm_dirty_log *dm_rh_dirty_log(struct dm_region_hash *rh)
+{
+	return rh->log;
+}
+EXPORT_SYMBOL_GPL(dm_rh_dirty_log);
+
+static unsigned rh_hash(struct dm_region_hash *rh, region_t region)
+{
+	return (unsigned) ((region * rh->prime) >> rh->shift) & rh->mask;
+}
+
+static struct dm_region *__rh_lookup(struct dm_region_hash *rh, region_t region)
+{
+	struct dm_region *reg;
+	struct list_head *bucket = rh->buckets + rh_hash(rh, region);
+
+	list_for_each_entry(reg, bucket, hash_list)
+		if (reg->key == region)
+			return reg;
+
+	return NULL;
+}
+
+static void __rh_insert(struct dm_region_hash *rh, struct dm_region *reg)
+{
+	list_add(&reg->hash_list, rh->buckets + rh_hash(rh, reg->key));
+}
+
+static struct dm_region *__rh_alloc(struct dm_region_hash *rh, region_t region)
+{
+	struct dm_region *reg, *nreg;
+
+	nreg = mempool_alloc(rh->region_pool, GFP_ATOMIC);
+	if (unlikely(!nreg))
+		nreg = kmalloc(sizeof(*nreg), GFP_NOIO);
+
+	nreg->state = rh->log->type->in_sync(rh->log, region, 1) ?
+		      DM_RH_CLEAN : DM_RH_NOSYNC;
+	nreg->rh = rh;
+	nreg->key = region;
+	INIT_LIST_HEAD(&nreg->list);
+	atomic_set(&nreg->pending, 0);
+	bio_list_init(&nreg->delayed_bios);
+
+	write_lock_irq(&rh->hash_lock);
+	reg = __rh_lookup(rh, region);
+	if (reg)
+		/* We lost the race. */
+		mempool_free(nreg, rh->region_pool);
+	else {
+		__rh_insert(rh, nreg);
+		if (nreg->state == DM_RH_CLEAN) {
+			spin_lock(&rh->region_lock);
+			list_add(&nreg->list, &rh->clean_regions);
+			spin_unlock(&rh->region_lock);
+		}
+
+		reg = nreg;
+	}
+	write_unlock_irq(&rh->hash_lock);
+
+	return reg;
+}
+
+static struct dm_region *__rh_find(struct dm_region_hash *rh, region_t region)
+{
+	struct dm_region *reg;
+
+	reg = __rh_lookup(rh, region);
+	if (!reg) {
+		read_unlock(&rh->hash_lock);
+		reg = __rh_alloc(rh, region);
+		read_lock(&rh->hash_lock);
+	}
+
+	return reg;
+}
+
+int dm_rh_get_state(struct dm_region_hash *rh, region_t region, int may_block)
+{
+	int r;
+	struct dm_region *reg;
+
+	read_lock(&rh->hash_lock);
+	reg = __rh_lookup(rh, region);
+	read_unlock(&rh->hash_lock);
+
+	if (reg)
+		return reg->state;
+
+	/*
+	 * The region wasn't in the hash, so we fall back to the
+	 * dirty log.
+	 */
+	r = rh->log->type->in_sync(rh->log, region, may_block);
+
+	/*
+	 * Any error from the dirty log (eg. -EWOULDBLOCK) gets
+	 * taken as a DM_RH_NOSYNC
+	 */
+	return r == 1 ? DM_RH_CLEAN : DM_RH_NOSYNC;
+}
+EXPORT_SYMBOL_GPL(dm_rh_get_state);
+
+static void complete_resync_work(struct dm_region *reg, int success)
+{
+	struct dm_region_hash *rh = reg->rh;
+
+	rh->log->type->set_region_sync(rh->log, reg->key, success);
+
+	/*
+	 * Dispatch the bios before we call 'wake_up_all'.
+	 * This is important because if we are suspending,
+	 * we want to know that recovery is complete and
+	 * the work queue is flushed.  If we wake_up_all
+	 * before we dispatch_bios (queue bios and call wake()),
+	 * then we risk suspending before the work queue
+	 * has been properly flushed.
+	 */
+	rh->dispatch_bios(rh->context, &reg->delayed_bios);
+	if (atomic_dec_and_test(&rh->recovery_in_flight))
+		rh->wakeup_all_recovery_waiters(rh->context);
+	up(&rh->recovery_count);
+}
+
+/* dm_rh_mark_nosync
+ * @ms
+ * @bio
+ * @done
+ * @error
+ *
+ * The bio was written on some mirror(s) but failed on other mirror(s).
+ * We can successfully endio the bio but should avoid the region being
+ * marked clean by setting the state DM_RH_NOSYNC.
+ *
+ * This function is _not_ safe in interrupt context!
+ */
+void dm_rh_mark_nosync(struct dm_region_hash *rh,
+		       struct bio *bio, unsigned done, int error)
+{
+	unsigned long flags;
+	struct dm_dirty_log *log = rh->log;
+	struct dm_region *reg;
+	region_t region = dm_rh_bio_to_region(rh, bio);
+	int recovering = 0;
+
+	/* We must inform the log that the sync count has changed. */
+	log->type->set_region_sync(log, region, 0);
+
+	read_lock(&rh->hash_lock);
+	reg = __rh_find(rh, region);
+	read_unlock(&rh->hash_lock);
+
+	/* region hash entry should exist because write was in-flight */
+	BUG_ON(!reg);
+	BUG_ON(!list_empty(&reg->list));
+
+	spin_lock_irqsave(&rh->region_lock, flags);
+	/*
+	 * Possible cases:
+	 *   1) DM_RH_DIRTY
+	 *   2) DM_RH_NOSYNC: was dirty, other preceeding writes failed
+	 *   3) DM_RH_RECOVERING: flushing pending writes
+	 * Either case, the region should have not been connected to list.
+	 */
+	recovering = (reg->state == DM_RH_RECOVERING);
+	reg->state = DM_RH_NOSYNC;
+	BUG_ON(!list_empty(&reg->list));
+	spin_unlock_irqrestore(&rh->region_lock, flags);
+
+	bio_endio(bio, error);
+	if (recovering)
+		complete_resync_work(reg, 0);
+}
+EXPORT_SYMBOL_GPL(dm_rh_mark_nosync);
+
+void dm_rh_update_states(struct dm_region_hash *rh, int errors_handled)
+{
+	struct dm_region *reg, *next;
+
+	LIST_HEAD(clean);
+	LIST_HEAD(recovered);
+	LIST_HEAD(failed_recovered);
+
+	/*
+	 * Quickly grab the lists.
+	 */
+	write_lock_irq(&rh->hash_lock);
+	spin_lock(&rh->region_lock);
+	if (!list_empty(&rh->clean_regions)) {
+		list_splice_init(&rh->clean_regions, &clean);
+
+		list_for_each_entry(reg, &clean, list)
+			list_del(&reg->hash_list);
+	}
+
+	if (!list_empty(&rh->recovered_regions)) {
+		list_splice_init(&rh->recovered_regions, &recovered);
+
+		list_for_each_entry(reg, &recovered, list)
+			list_del(&reg->hash_list);
+	}
+
+	if (!list_empty(&rh->failed_recovered_regions)) {
+		list_splice_init(&rh->failed_recovered_regions,
+				 &failed_recovered);
+
+		list_for_each_entry(reg, &failed_recovered, list)
+			list_del(&reg->hash_list);
+	}
+
+	spin_unlock(&rh->region_lock);
+	write_unlock_irq(&rh->hash_lock);
+
+	/*
+	 * All the regions on the recovered and clean lists have
+	 * now been pulled out of the system, so no need to do
+	 * any more locking.
+	 */
+	list_for_each_entry_safe(reg, next, &recovered, list) {
+		rh->log->type->clear_region(rh->log, reg->key);
+		complete_resync_work(reg, 1);
+		mempool_free(reg, rh->region_pool);
+	}
+
+	list_for_each_entry_safe(reg, next, &failed_recovered, list) {
+		complete_resync_work(reg, errors_handled ? 0 : 1);
+		mempool_free(reg, rh->region_pool);
+	}
+
+	list_for_each_entry_safe(reg, next, &clean, list) {
+		rh->log->type->clear_region(rh->log, reg->key);
+		mempool_free(reg, rh->region_pool);
+	}
+
+	rh->log->type->flush(rh->log);
+}
+EXPORT_SYMBOL_GPL(dm_rh_update_states);
+
+static void rh_inc(struct dm_region_hash *rh, region_t region)
+{
+	struct dm_region *reg;
+
+	read_lock(&rh->hash_lock);
+	reg = __rh_find(rh, region);
+
+	spin_lock_irq(&rh->region_lock);
+	atomic_inc(&reg->pending);
+
+	if (reg->state == DM_RH_CLEAN) {
+		reg->state = DM_RH_DIRTY;
+		list_del_init(&reg->list);	/* take off the clean list */
+		spin_unlock_irq(&rh->region_lock);
+
+		rh->log->type->mark_region(rh->log, reg->key);
+	} else
+		spin_unlock_irq(&rh->region_lock);
+
+
+	read_unlock(&rh->hash_lock);
+}
+
+void dm_rh_inc_pending(struct dm_region_hash *rh, struct bio_list *bios)
+{
+	struct bio *bio;
+
+	for (bio = bios->head; bio; bio = bio->bi_next)
+		rh_inc(rh, dm_rh_bio_to_region(rh, bio));
+}
+EXPORT_SYMBOL_GPL(dm_rh_inc_pending);
+
+void dm_rh_dec(struct dm_region_hash *rh, region_t region)
+{
+	unsigned long flags;
+	struct dm_region *reg;
+	int should_wake = 0;
+
+	read_lock(&rh->hash_lock);
+	reg = __rh_lookup(rh, region);
+	read_unlock(&rh->hash_lock);
+
+	spin_lock_irqsave(&rh->region_lock, flags);
+	if (atomic_dec_and_test(&reg->pending)) {
+		/*
+		 * There is no pending I/O for this region.
+		 * We can move the region to corresponding list for next action.
+		 * At this point, the region is not yet connected to any list.
+		 *
+		 * If the state is DM_RH_NOSYNC, the region should be kept off
+		 * from clean list.
+		 * The hash entry for DM_RH_NOSYNC will remain in memory
+		 * until the region is recovered or the map is reloaded.
+		 */
+
+		/* do nothing for DM_RH_NOSYNC */
+		if (reg->state == DM_RH_RECOVERING) {
+			list_add_tail(&reg->list, &rh->quiesced_regions);
+		} else if (reg->state == DM_RH_DIRTY) {
+			reg->state = DM_RH_CLEAN;
+			list_add(&reg->list, &rh->clean_regions);
+		}
+		should_wake = 1;
+	}
+	spin_unlock_irqrestore(&rh->region_lock, flags);
+
+	if (should_wake)
+		rh->wakeup_workers(rh->context);
+}
+EXPORT_SYMBOL_GPL(dm_rh_dec);
+
+/*
+ * Starts quiescing a region in preparation for recovery.
+ */
+static int __rh_recovery_prepare(struct dm_region_hash *rh)
+{
+	int r;
+	region_t region;
+	struct dm_region *reg;
+
+	/*
+	 * Ask the dirty log what's next.
+	 */
+	r = rh->log->type->get_resync_work(rh->log, &region);
+	if (r <= 0)
+		return r;
+
+	/*
+	 * Get this region, and start it quiescing by setting the
+	 * recovering flag.
+	 */
+	read_lock(&rh->hash_lock);
+	reg = __rh_find(rh, region);
+	read_unlock(&rh->hash_lock);
+
+	spin_lock_irq(&rh->region_lock);
+	reg->state = DM_RH_RECOVERING;
+
+	/* Already quiesced ? */
+	if (atomic_read(&reg->pending))
+		list_del_init(&reg->list);
+	else
+		list_move(&reg->list, &rh->quiesced_regions);
+
+	spin_unlock_irq(&rh->region_lock);
+
+	return 1;
+}
+
+void dm_rh_recovery_prepare(struct dm_region_hash *rh)
+{
+	/* Extra reference to avoid race with dm_rh_stop_recovery */
+	atomic_inc(&rh->recovery_in_flight);
+
+	while (!down_trylock(&rh->recovery_count)) {
+		atomic_inc(&rh->recovery_in_flight);
+		if (__rh_recovery_prepare(rh) <= 0) {
+			atomic_dec(&rh->recovery_in_flight);
+			up(&rh->recovery_count);
+			break;
+		}
+	}
+
+	/* Drop the extra reference */
+	if (atomic_dec_and_test(&rh->recovery_in_flight))
+		rh->wakeup_all_recovery_waiters(rh->context);
+}
+EXPORT_SYMBOL_GPL(dm_rh_recovery_prepare);
+
+/*
+ * Returns any quiesced regions.
+ */
+struct dm_region *dm_rh_recovery_start(struct dm_region_hash *rh)
+{
+	struct dm_region *reg = NULL;
+
+	spin_lock_irq(&rh->region_lock);
+	if (!list_empty(&rh->quiesced_regions)) {
+		reg = list_entry(rh->quiesced_regions.next,
+				 struct dm_region, list);
+		list_del_init(&reg->list);  /* remove from the quiesced list */
+	}
+	spin_unlock_irq(&rh->region_lock);
+
+	return reg;
+}
+EXPORT_SYMBOL_GPL(dm_rh_recovery_start);
+
+void dm_rh_recovery_end(struct dm_region *reg, int success)
+{
+	struct dm_region_hash *rh = reg->rh;
+
+	spin_lock_irq(&rh->region_lock);
+	if (success)
+		list_add(&reg->list, &reg->rh->recovered_regions);
+	else {
+		reg->state = DM_RH_NOSYNC;
+		list_add(&reg->list, &reg->rh->failed_recovered_regions);
+	}
+	spin_unlock_irq(&rh->region_lock);
+
+	rh->wakeup_workers(rh->context);
+}
+EXPORT_SYMBOL_GPL(dm_rh_recovery_end);
+
+/* Return recovery in flight count. */
+int dm_rh_recovery_in_flight(struct dm_region_hash *rh)
+{
+	return atomic_read(&rh->recovery_in_flight);
+}
+EXPORT_SYMBOL_GPL(dm_rh_recovery_in_flight);
+
+int dm_rh_flush(struct dm_region_hash *rh)
+{
+	return rh->log->type->flush(rh->log);
+}
+EXPORT_SYMBOL_GPL(dm_rh_flush);
+
+void dm_rh_delay(struct dm_region_hash *rh, struct bio *bio)
+{
+	struct dm_region *reg;
+
+	read_lock(&rh->hash_lock);
+	reg = __rh_find(rh, dm_rh_bio_to_region(rh, bio));
+	bio_list_add(&reg->delayed_bios, bio);
+	read_unlock(&rh->hash_lock);
+}
+EXPORT_SYMBOL_GPL(dm_rh_delay);
+
+void dm_rh_stop_recovery(struct dm_region_hash *rh)
+{
+	int i;
+
+	/* wait for any recovering regions */
+	for (i = 0; i < rh->max_recovery; i++)
+		down(&rh->recovery_count);
+}
+EXPORT_SYMBOL_GPL(dm_rh_stop_recovery);
+
+void dm_rh_start_recovery(struct dm_region_hash *rh)
+{
+	int i;
+
+	for (i = 0; i < rh->max_recovery; i++)
+		up(&rh->recovery_count);
+
+	rh->wakeup_workers(rh->context);
+}
+EXPORT_SYMBOL_GPL(dm_rh_start_recovery);
+
+MODULE_DESCRIPTION(DM_NAME " region hash");
+MODULE_AUTHOR("Joe Thornber/Heinz Mauelshagen <dm-devel@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/md/dm-round-robin.c b/drivers/md/dm-round-robin.c
index 391dfa2..cdfbf65 100644
--- a/drivers/md/dm-round-robin.c
+++ b/drivers/md/dm-round-robin.c
@@ -9,7 +9,8 @@
  * Round-robin path selector.
  */
 
-#include "dm.h"
+#include <linux/device-mapper.h>
+
 #include "dm-path-selector.h"
 
 #include <linux/slab.h>
diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c
index 6e5528a..b2d9d1a 100644
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -600,7 +600,6 @@
 
 	s->valid = 1;
 	s->active = 0;
-	s->last_percent = 0;
 	init_rwsem(&s->lock);
 	spin_lock_init(&s->pe_lock);
 	s->ti = ti;
@@ -824,8 +823,10 @@
 	 * the bios for the original write to the origin.
 	 */
 	if (primary_pe &&
-	    atomic_dec_and_test(&primary_pe->ref_count))
+	    atomic_dec_and_test(&primary_pe->ref_count)) {
 		origin_bios = bio_list_get(&primary_pe->origin_bios);
+		free_pending_exception(primary_pe);
+	}
 
 	/*
 	 * Free the pe if it's not linked to an origin write or if
@@ -834,12 +835,6 @@
 	if (!primary_pe || primary_pe != pe)
 		free_pending_exception(pe);
 
-	/*
-	 * Free the primary pe if nothing references it.
-	 */
-	if (primary_pe && !atomic_read(&primary_pe->ref_count))
-		free_pending_exception(primary_pe);
-
 	return origin_bios;
 }
 
diff --git a/drivers/md/dm-snap.h b/drivers/md/dm-snap.h
index 292c156..f07315f 100644
--- a/drivers/md/dm-snap.h
+++ b/drivers/md/dm-snap.h
@@ -9,7 +9,7 @@
 #ifndef DM_SNAPSHOT_H
 #define DM_SNAPSHOT_H
 
-#include "dm.h"
+#include <linux/device-mapper.h>
 #include "dm-bio-list.h"
 #include <linux/blkdev.h>
 #include <linux/workqueue.h>
@@ -158,9 +158,6 @@
 	/* Used for display of table */
 	char type;
 
-	/* The last percentage we notified */
-	int last_percent;
-
 	mempool_t *pending_pool;
 
 	struct exception_table pending;
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index b745d8a..a2d068d 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -4,7 +4,7 @@
  * This file is released under the GPL.
  */
 
-#include "dm.h"
+#include <linux/device-mapper.h>
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -60,8 +60,8 @@
 {
 	size_t len;
 
-	if (array_too_big(sizeof(struct stripe_c), sizeof(struct stripe),
-			  stripes))
+	if (dm_array_too_big(sizeof(struct stripe_c), sizeof(struct stripe),
+			     stripes))
 		return NULL;
 
 	len = sizeof(struct stripe_c) + (sizeof(struct stripe) * stripes);
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index a740a69..a63161a 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -43,7 +43,7 @@
 	 * device.  This should be a combination of FMODE_READ
 	 * and FMODE_WRITE.
 	 */
-	int mode;
+	fmode_t mode;
 
 	/* a list of devices used by this table */
 	struct list_head devices;
@@ -217,7 +217,7 @@
 	return 0;
 }
 
-int dm_table_create(struct dm_table **result, int mode,
+int dm_table_create(struct dm_table **result, fmode_t mode,
 		    unsigned num_targets, struct mapped_device *md)
 {
 	struct dm_table *t = kzalloc(sizeof(*t), GFP_KERNEL);
@@ -313,19 +313,6 @@
 }
 
 /*
- * Convert a device path to a dev_t.
- */
-static int lookup_device(const char *path, dev_t *dev)
-{
-	struct block_device *bdev = lookup_bdev(path);
-	if (IS_ERR(bdev))
-		return PTR_ERR(bdev);
-	*dev = bdev->bd_dev;
-	bdput(bdev);
-	return 0;
-}
-
-/*
  * See if we've already got a device in the list.
  */
 static struct dm_dev_internal *find_device(struct list_head *l, dev_t dev)
@@ -357,7 +344,7 @@
 		return PTR_ERR(bdev);
 	r = bd_claim_by_disk(bdev, _claim_ptr, dm_disk(md));
 	if (r)
-		blkdev_put(bdev);
+		blkdev_put(bdev, d->dm_dev.mode);
 	else
 		d->dm_dev.bdev = bdev;
 	return r;
@@ -372,7 +359,7 @@
 		return;
 
 	bd_release_from_disk(d->dm_dev.bdev, dm_disk(md));
-	blkdev_put(d->dm_dev.bdev);
+	blkdev_put(d->dm_dev.bdev, d->dm_dev.mode);
 	d->dm_dev.bdev = NULL;
 }
 
@@ -395,7 +382,7 @@
  * careful to leave things as they were if we fail to reopen the
  * device.
  */
-static int upgrade_mode(struct dm_dev_internal *dd, int new_mode,
+static int upgrade_mode(struct dm_dev_internal *dd, fmode_t new_mode,
 			struct mapped_device *md)
 {
 	int r;
@@ -421,7 +408,7 @@
  */
 static int __table_get_device(struct dm_table *t, struct dm_target *ti,
 			      const char *path, sector_t start, sector_t len,
-			      int mode, struct dm_dev **result)
+			      fmode_t mode, struct dm_dev **result)
 {
 	int r;
 	dev_t uninitialized_var(dev);
@@ -437,8 +424,12 @@
 			return -EOVERFLOW;
 	} else {
 		/* convert the path to a device */
-		if ((r = lookup_device(path, &dev)))
-			return r;
+		struct block_device *bdev = lookup_bdev(path);
+
+		if (IS_ERR(bdev))
+			return PTR_ERR(bdev);
+		dev = bdev->bd_dev;
+		bdput(bdev);
 	}
 
 	dd = find_device(&t->devices, dev);
@@ -537,7 +528,7 @@
 EXPORT_SYMBOL_GPL(dm_set_device_limits);
 
 int dm_get_device(struct dm_target *ti, const char *path, sector_t start,
-		  sector_t len, int mode, struct dm_dev **result)
+		  sector_t len, fmode_t mode, struct dm_dev **result)
 {
 	int r = __table_get_device(ti->table, ti, path,
 				   start, len, mode, result);
@@ -887,7 +878,7 @@
 	return &t->devices;
 }
 
-int dm_table_get_mode(struct dm_table *t)
+fmode_t dm_table_get_mode(struct dm_table *t)
 {
 	return t->mode;
 }
diff --git a/drivers/md/dm-zero.c b/drivers/md/dm-zero.c
index bdec206..cdbf126 100644
--- a/drivers/md/dm-zero.c
+++ b/drivers/md/dm-zero.c
@@ -4,7 +4,7 @@
  * This file is released under the GPL.
  */
 
-#include "dm.h"
+#include <linux/device-mapper.h>
 
 #include <linux/module.h>
 #include <linux/init.h>
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 327de03..6963ad1 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -21,7 +21,6 @@
 #include <linux/idr.h>
 #include <linux/hdreg.h>
 #include <linux/blktrace_api.h>
-#include <linux/smp_lock.h>
 
 #define DM_MSG_PREFIX "core"
 
@@ -76,7 +75,6 @@
  */
 struct dm_wq_req {
 	enum {
-		DM_WQ_FLUSH_ALL,
 		DM_WQ_FLUSH_DEFERRED,
 	} type;
 	struct work_struct work;
@@ -151,40 +149,40 @@
 
 static int __init local_init(void)
 {
-	int r;
+	int r = -ENOMEM;
 
 	/* allocate a slab for the dm_ios */
 	_io_cache = KMEM_CACHE(dm_io, 0);
 	if (!_io_cache)
-		return -ENOMEM;
+		return r;
 
 	/* allocate a slab for the target ios */
 	_tio_cache = KMEM_CACHE(dm_target_io, 0);
-	if (!_tio_cache) {
-		kmem_cache_destroy(_io_cache);
-		return -ENOMEM;
-	}
+	if (!_tio_cache)
+		goto out_free_io_cache;
 
 	r = dm_uevent_init();
-	if (r) {
-		kmem_cache_destroy(_tio_cache);
-		kmem_cache_destroy(_io_cache);
-		return r;
-	}
+	if (r)
+		goto out_free_tio_cache;
 
 	_major = major;
 	r = register_blkdev(_major, _name);
-	if (r < 0) {
-		kmem_cache_destroy(_tio_cache);
-		kmem_cache_destroy(_io_cache);
-		dm_uevent_exit();
-		return r;
-	}
+	if (r < 0)
+		goto out_uevent_exit;
 
 	if (!_major)
 		_major = r;
 
 	return 0;
+
+out_uevent_exit:
+	dm_uevent_exit();
+out_free_tio_cache:
+	kmem_cache_destroy(_tio_cache);
+out_free_io_cache:
+	kmem_cache_destroy(_io_cache);
+
+	return r;
 }
 
 static void local_exit(void)
@@ -249,13 +247,13 @@
 /*
  * Block device functions
  */
-static int dm_blk_open(struct inode *inode, struct file *file)
+static int dm_blk_open(struct block_device *bdev, fmode_t mode)
 {
 	struct mapped_device *md;
 
 	spin_lock(&_minor_lock);
 
-	md = inode->i_bdev->bd_disk->private_data;
+	md = bdev->bd_disk->private_data;
 	if (!md)
 		goto out;
 
@@ -274,11 +272,9 @@
 	return md ? 0 : -ENXIO;
 }
 
-static int dm_blk_close(struct inode *inode, struct file *file)
+static int dm_blk_close(struct gendisk *disk, fmode_t mode)
 {
-	struct mapped_device *md;
-
-	md = inode->i_bdev->bd_disk->private_data;
+	struct mapped_device *md = disk->private_data;
 	atomic_dec(&md->open_count);
 	dm_put(md);
 	return 0;
@@ -315,21 +311,14 @@
 	return dm_get_geometry(md, geo);
 }
 
-static int dm_blk_ioctl(struct inode *inode, struct file *file,
+static int dm_blk_ioctl(struct block_device *bdev, fmode_t mode,
 			unsigned int cmd, unsigned long arg)
 {
-	struct mapped_device *md;
-	struct dm_table *map;
+	struct mapped_device *md = bdev->bd_disk->private_data;
+	struct dm_table *map = dm_get_table(md);
 	struct dm_target *tgt;
 	int r = -ENOTTY;
 
-	/* We don't really need this lock, but we do need 'inode'. */
-	unlock_kernel();
-
-	md = inode->i_bdev->bd_disk->private_data;
-
-	map = dm_get_table(md);
-
 	if (!map || !dm_table_get_size(map))
 		goto out;
 
@@ -345,12 +334,11 @@
 	}
 
 	if (tgt->type->ioctl)
-		r = tgt->type->ioctl(tgt, inode, file, cmd, arg);
+		r = tgt->type->ioctl(tgt, cmd, arg);
 
 out:
 	dm_table_put(map);
 
-	lock_kernel();
 	return r;
 }
 
@@ -669,6 +657,7 @@
 	clone->bi_size = to_bytes(len);
 	clone->bi_io_vec->bv_offset = offset;
 	clone->bi_io_vec->bv_len = clone->bi_size;
+	clone->bi_flags |= 1 << BIO_CLONED;
 
 	return clone;
 }
@@ -1394,9 +1383,6 @@
 
 	down_write(&md->io_lock);
 	switch (req->type) {
-	case DM_WQ_FLUSH_ALL:
-		__merge_pushback_list(md);
-		/* pass through */
 	case DM_WQ_FLUSH_DEFERRED:
 		__flush_deferred_io(md);
 		break;
@@ -1526,7 +1512,7 @@
 		if (!md->suspended_bdev) {
 			DMWARN("bdget failed in dm_suspend");
 			r = -ENOMEM;
-			goto flush_and_out;
+			goto out;
 		}
 
 		/*
@@ -1577,14 +1563,6 @@
 
 	set_bit(DMF_SUSPENDED, &md->flags);
 
-flush_and_out:
-	if (r && noflush)
-		/*
-		 * Because there may be already I/Os in the pushback list,
-		 * flush them before return.
-		 */
-		dm_queue_flush(md, DM_WQ_FLUSH_ALL, NULL);
-
 out:
 	if (r && md->suspended_bdev) {
 		bdput(md->suspended_bdev);
diff --git a/drivers/md/dm.h b/drivers/md/dm.h
index cd189da..0ade60c 100644
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -62,15 +62,6 @@
 int dm_target_iterate(void (*iter_func)(struct target_type *tt,
 					void *param), void *param);
 
-/*-----------------------------------------------------------------
- * Useful inlines.
- *---------------------------------------------------------------*/
-static inline int array_too_big(unsigned long fixed, unsigned long obj,
-				unsigned long num)
-{
-	return (num > (ULONG_MAX - fixed) / obj);
-}
-
 int dm_split_args(int *argc, char ***argvp, char *input);
 
 /*
diff --git a/drivers/md/md.c b/drivers/md/md.c
index aaa3d46..b4162f6 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -222,6 +222,9 @@
 		list_del(&mddev->all_mddevs);
 		spin_unlock(&all_mddevs_lock);
 		blk_cleanup_queue(mddev->queue);
+		if (mddev->sysfs_state)
+			sysfs_put(mddev->sysfs_state);
+		mddev->sysfs_state = NULL;
 		kobject_put(&mddev->kobj);
 	} else
 		spin_unlock(&all_mddevs_lock);
@@ -1459,6 +1462,8 @@
 		kobject_del(&rdev->kobj);
 		goto fail;
 	}
+	rdev->sysfs_state = sysfs_get_dirent(rdev->kobj.sd, "state");
+
 	list_add_rcu(&rdev->same_set, &mddev->disks);
 	bd_claim_by_disk(rdev->bdev, rdev->bdev->bd_holder, mddev->gendisk);
 	return 0;
@@ -1488,7 +1493,8 @@
 	printk(KERN_INFO "md: unbind<%s>\n", bdevname(rdev->bdev,b));
 	rdev->mddev = NULL;
 	sysfs_remove_link(&rdev->kobj, "block");
-
+	sysfs_put(rdev->sysfs_state);
+	rdev->sysfs_state = NULL;
 	/* We need to delay this, otherwise we can deadlock when
 	 * writing to 'remove' to "dev/state".  We also need
 	 * to delay it due to rcu usage.
@@ -1520,7 +1526,7 @@
 	if (err) {
 		printk(KERN_ERR "md: could not bd_claim %s.\n",
 			bdevname(bdev, b));
-		blkdev_put(bdev);
+		blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
 		return err;
 	}
 	if (!shared)
@@ -1536,7 +1542,7 @@
 	if (!bdev)
 		MD_BUG();
 	bd_release(bdev);
-	blkdev_put(bdev);
+	blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
 }
 
 void md_autodetect_dev(dev_t dev);
@@ -1923,8 +1929,8 @@
 
 		err = 0;
 	}
-	if (!err)
-		sysfs_notify(&rdev->kobj, NULL, "state");
+	if (!err && rdev->sysfs_state)
+		sysfs_notify_dirent(rdev->sysfs_state);
 	return err ? err : len;
 }
 static struct rdev_sysfs_entry rdev_state =
@@ -2019,7 +2025,7 @@
 			rdev->raid_disk = -1;
 			return err;
 		} else
-			sysfs_notify(&rdev->kobj, NULL, "state");
+			sysfs_notify_dirent(rdev->sysfs_state);
 		sprintf(nm, "rd%d", rdev->raid_disk);
 		if (sysfs_create_link(&rdev->mddev->kobj, &rdev->kobj, nm))
 			printk(KERN_WARNING
@@ -2036,7 +2042,7 @@
 		clear_bit(Faulty, &rdev->flags);
 		clear_bit(WriteMostly, &rdev->flags);
 		set_bit(In_sync, &rdev->flags);
-		sysfs_notify(&rdev->kobj, NULL, "state");
+		sysfs_notify_dirent(rdev->sysfs_state);
 	}
 	return len;
 }
@@ -2770,7 +2776,7 @@
 	if (err)
 		return err;
 	else {
-		sysfs_notify(&mddev->kobj, NULL, "array_state");
+		sysfs_notify_dirent(mddev->sysfs_state);
 		return len;
 	}
 }
@@ -3457,6 +3463,11 @@
 	disk->fops = &md_fops;
 	disk->private_data = mddev;
 	disk->queue = mddev->queue;
+	/* Allow extended partitions.  This makes the
+	 * 'mdp' device redundant, but we can really
+	 * remove it now.
+	 */
+	disk->flags |= GENHD_FL_EXT_DEVT;
 	add_disk(disk);
 	mddev->gendisk = disk;
 	error = kobject_init_and_add(&mddev->kobj, &md_ktype,
@@ -3465,8 +3476,10 @@
 	if (error)
 		printk(KERN_WARNING "md: cannot register %s/md - name in use\n",
 		       disk->disk_name);
-	else
+	else {
 		kobject_uevent(&mddev->kobj, KOBJ_ADD);
+		mddev->sysfs_state = sysfs_get_dirent(mddev->kobj.sd, "array_state");
+	}
 	return NULL;
 }
 
@@ -3477,7 +3490,7 @@
 	if (!atomic_read(&mddev->writes_pending)) {
 		mddev->safemode = 1;
 		if (mddev->external)
-			set_bit(MD_NOTIFY_ARRAY_STATE, &mddev->flags);
+			sysfs_notify_dirent(mddev->sysfs_state);
 	}
 	md_wakeup_thread(mddev->thread);
 }
@@ -3578,7 +3591,7 @@
 				return -EINVAL;
 			}
 		}
-		sysfs_notify(&rdev->kobj, NULL, "state");
+		sysfs_notify_dirent(rdev->sysfs_state);
 	}
 
 	md_probe(mddev->unit, NULL, NULL);
@@ -3740,7 +3753,7 @@
 
 	mddev->changed = 1;
 	md_new_event(mddev);
-	sysfs_notify(&mddev->kobj, NULL, "array_state");
+	sysfs_notify_dirent(mddev->sysfs_state);
 	sysfs_notify(&mddev->kobj, NULL, "sync_action");
 	sysfs_notify(&mddev->kobj, NULL, "degraded");
 	kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE);
@@ -3767,7 +3780,7 @@
 	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 	md_wakeup_thread(mddev->thread);
 	md_wakeup_thread(mddev->sync_thread);
-	sysfs_notify(&mddev->kobj, NULL, "array_state");
+	sysfs_notify_dirent(mddev->sysfs_state);
 	return 0;
 }
 
@@ -3847,7 +3860,7 @@
 			module_put(mddev->pers->owner);
 			mddev->pers = NULL;
 			/* tell userspace to handle 'inactive' */
-			sysfs_notify(&mddev->kobj, NULL, "array_state");
+			sysfs_notify_dirent(mddev->sysfs_state);
 
 			set_capacity(disk, 0);
 			mddev->changed = 1;
@@ -3933,7 +3946,7 @@
 			mdname(mddev));
 	err = 0;
 	md_new_event(mddev);
-	sysfs_notify(&mddev->kobj, NULL, "array_state");
+	sysfs_notify_dirent(mddev->sysfs_state);
 out:
 	return err;
 }
@@ -4297,7 +4310,7 @@
 		if (err)
 			export_rdev(rdev);
 		else
-			sysfs_notify(&rdev->kobj, NULL, "state");
+			sysfs_notify_dirent(rdev->sysfs_state);
 
 		md_update_sb(mddev, 1);
 		if (mddev->degraded)
@@ -4785,7 +4798,7 @@
 	return 0;
 }
 
-static int md_ioctl(struct inode *inode, struct file *file,
+static int md_ioctl(struct block_device *bdev, fmode_t mode,
 			unsigned int cmd, unsigned long arg)
 {
 	int err = 0;
@@ -4823,7 +4836,7 @@
 	 * Commands creating/starting a new array:
 	 */
 
-	mddev = inode->i_bdev->bd_disk->private_data;
+	mddev = bdev->bd_disk->private_data;
 
 	if (!mddev) {
 		BUG();
@@ -4938,7 +4951,7 @@
 	if (_IOC_TYPE(cmd) == MD_MAJOR && mddev->ro && mddev->pers) {
 		if (mddev->ro == 2) {
 			mddev->ro = 0;
-			sysfs_notify(&mddev->kobj, NULL, "array_state");
+			sysfs_notify_dirent(mddev->sysfs_state);
 			set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 			md_wakeup_thread(mddev->thread);
 		} else {
@@ -4996,13 +5009,13 @@
 	return err;
 }
 
-static int md_open(struct inode *inode, struct file *file)
+static int md_open(struct block_device *bdev, fmode_t mode)
 {
 	/*
 	 * Succeed if we can lock the mddev, which confirms that
 	 * it isn't being stopped right now.
 	 */
-	mddev_t *mddev = inode->i_bdev->bd_disk->private_data;
+	mddev_t *mddev = bdev->bd_disk->private_data;
 	int err;
 
 	if ((err = mutex_lock_interruptible_nested(&mddev->reconfig_mutex, 1)))
@@ -5013,14 +5026,14 @@
 	atomic_inc(&mddev->openers);
 	mddev_unlock(mddev);
 
-	check_disk_change(inode->i_bdev);
+	check_disk_change(bdev);
  out:
 	return err;
 }
 
-static int md_release(struct inode *inode, struct file * file)
+static int md_release(struct gendisk *disk, fmode_t mode)
 {
- 	mddev_t *mddev = inode->i_bdev->bd_disk->private_data;
+ 	mddev_t *mddev = disk->private_data;
 
 	BUG_ON(!mddev);
 	atomic_dec(&mddev->openers);
@@ -5048,7 +5061,7 @@
 	.owner		= THIS_MODULE,
 	.open		= md_open,
 	.release	= md_release,
-	.ioctl		= md_ioctl,
+	.locked_ioctl	= md_ioctl,
 	.getgeo		= md_getgeo,
 	.media_changed	= md_media_changed,
 	.revalidate_disk= md_revalidate,
@@ -5612,7 +5625,7 @@
 		spin_unlock_irq(&mddev->write_lock);
 	}
 	if (did_change)
-		sysfs_notify(&mddev->kobj, NULL, "array_state");
+		sysfs_notify_dirent(mddev->sysfs_state);
 	wait_event(mddev->sb_wait,
 		   !test_bit(MD_CHANGE_CLEAN, &mddev->flags) &&
 		   !test_bit(MD_CHANGE_PENDING, &mddev->flags));
@@ -5655,7 +5668,7 @@
 			mddev->safemode = 1;
 		spin_unlock_irq(&mddev->write_lock);
 		md_update_sb(mddev, 0);
-		sysfs_notify(&mddev->kobj, NULL, "array_state");
+		sysfs_notify_dirent(mddev->sysfs_state);
 	} else
 		spin_unlock_irq(&mddev->write_lock);
 
@@ -6048,9 +6061,6 @@
 	if (mddev->bitmap)
 		bitmap_daemon_work(mddev->bitmap);
 
-	if (test_and_clear_bit(MD_NOTIFY_ARRAY_STATE, &mddev->flags))
-		sysfs_notify(&mddev->kobj, NULL, "array_state");
-
 	if (mddev->ro)
 		return;
 
@@ -6103,7 +6113,7 @@
 				mddev->safemode = 0;
 			spin_unlock_irq(&mddev->write_lock);
 			if (did_change)
-				sysfs_notify(&mddev->kobj, NULL, "array_state");
+				sysfs_notify_dirent(mddev->sysfs_state);
 		}
 
 		if (mddev->flags)
@@ -6111,7 +6121,7 @@
 
 		rdev_for_each(rdev, rtmp, mddev)
 			if (test_and_clear_bit(StateChanged, &rdev->flags))
-				sysfs_notify(&rdev->kobj, NULL, "state");
+				sysfs_notify_dirent(rdev->sysfs_state);
 
 
 		if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) &&
@@ -6221,7 +6231,7 @@
 
 void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev)
 {
-	sysfs_notify(&rdev->kobj, NULL, "state");
+	sysfs_notify_dirent(rdev->sysfs_state);
 	wait_event_timeout(rdev->blocked_wait,
 			   !test_bit(Blocked, &rdev->flags),
 			   msecs_to_jiffies(5000));
diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c
index 5b34c13..127b052 100644
--- a/drivers/media/common/saa7146_fops.c
+++ b/drivers/media/common/saa7146_fops.c
@@ -545,11 +545,11 @@
 	if( VFL_TYPE_GRABBER == type ) {
 		vv->video_minor = vfd->minor;
 		INFO(("%s: registered device video%d [v4l2]\n",
-			dev->name, vfd->minor & 0x1f));
+			dev->name, vfd->num));
 	} else {
 		vv->vbi_minor = vfd->minor;
 		INFO(("%s: registered device vbi%d [v4l2]\n",
-			dev->name, vfd->minor & 0x1f));
+			dev->name, vfd->num));
 	}
 
 	*vid = vfd;
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index 99be9e5..fe0bd55 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -834,7 +834,7 @@
  * copying is done already, arg is a kernel pointer.
  */
 
-int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg)
+static int __saa7146_video_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 {
 	struct saa7146_fh *fh  = file->private_data;
 	struct saa7146_dev *dev = fh->dev;
@@ -1215,12 +1215,18 @@
 	}
 #endif
 	default:
-		return v4l_compat_translate_ioctl(inode,file,cmd,arg,
-						  saa7146_video_do_ioctl);
+		return v4l_compat_translate_ioctl(file, cmd, arg,
+						  __saa7146_video_do_ioctl);
 	}
 	return 0;
 }
 
+int saa7146_video_do_ioctl(struct inode *inode, struct file *file,
+				    unsigned int cmd, void *arg)
+{
+	return __saa7146_video_do_ioctl(file, cmd, arg);
+}
+
 /*********************************************************************************/
 /* buffer handling functions                                                  */
 
diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb/frontends/s5h1411.c
index 2febfb5..40644aa 100644
--- a/drivers/media/dvb/frontends/s5h1411.c
+++ b/drivers/media/dvb/frontends/s5h1411.c
@@ -38,6 +38,7 @@
 	struct dvb_frontend frontend;
 
 	fe_modulation_t current_modulation;
+	unsigned int first_tune:1;
 
 	u32 current_frequency;
 	int if_freq;
@@ -62,7 +63,7 @@
 	{ S5H1411_I2C_TOP_ADDR, 0x08, 0x0047, },
 	{ S5H1411_I2C_TOP_ADDR, 0x1c, 0x0400, },
 	{ S5H1411_I2C_TOP_ADDR, 0x1e, 0x0370, },
-	{ S5H1411_I2C_TOP_ADDR, 0x1f, 0x342a, },
+	{ S5H1411_I2C_TOP_ADDR, 0x1f, 0x342c, },
 	{ S5H1411_I2C_TOP_ADDR, 0x24, 0x0231, },
 	{ S5H1411_I2C_TOP_ADDR, 0x25, 0x1011, },
 	{ S5H1411_I2C_TOP_ADDR, 0x26, 0x0f07, },
@@ -100,7 +101,6 @@
 	{ S5H1411_I2C_TOP_ADDR, 0x78, 0x3141, },
 	{ S5H1411_I2C_TOP_ADDR, 0x7a, 0x3141, },
 	{ S5H1411_I2C_TOP_ADDR, 0xb3, 0x8003, },
-	{ S5H1411_I2C_TOP_ADDR, 0xb5, 0xafbb, },
 	{ S5H1411_I2C_TOP_ADDR, 0xb5, 0xa6bb, },
 	{ S5H1411_I2C_TOP_ADDR, 0xb6, 0x0609, },
 	{ S5H1411_I2C_TOP_ADDR, 0xb7, 0x2f06, },
@@ -393,7 +393,7 @@
 
 	switch (KHz) {
 	case 3250:
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x10d9);
+		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x10d5);
 		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x39, 0x5342);
 		s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x2c, 0x10d9);
 		break;
@@ -464,13 +464,25 @@
 
 	if (inversion == 1)
 		val |= 0x1000; /* Inverted */
-	else
-		val |= 0x0000;
 
 	state->inversion = inversion;
 	return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x24, val);
 }
 
+static int s5h1411_set_serialmode(struct dvb_frontend *fe, int serial)
+{
+	struct s5h1411_state *state = fe->demodulator_priv;
+	u16 val;
+
+	dprintk("%s(%d)\n", __func__, serial);
+	val = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xbd) & ~0x100;
+
+	if (serial == 1)
+		val |= 0x100;
+
+	return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xbd, val);
+}
+
 static int s5h1411_enable_modulation(struct dvb_frontend *fe,
 				     fe_modulation_t m)
 {
@@ -478,6 +490,12 @@
 
 	dprintk("%s(0x%08x)\n", __func__, m);
 
+	if ((state->first_tune == 0) && (m == state->current_modulation)) {
+		dprintk("%s() Already at desired modulation.  Skipping...\n",
+			__func__);
+		return 0;
+	}
+
 	switch (m) {
 	case VSB_8:
 		dprintk("%s() VSB_8\n", __func__);
@@ -502,6 +520,7 @@
 	}
 
 	state->current_modulation = m;
+	state->first_tune = 0;
 	s5h1411_softreset(fe);
 
 	return 0;
@@ -535,7 +554,7 @@
 		return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xe0, val);
 }
 
-static int s5h1411_sleep(struct dvb_frontend *fe, int enable)
+static int s5h1411_set_powerstate(struct dvb_frontend *fe, int enable)
 {
 	struct s5h1411_state *state = fe->demodulator_priv;
 
@@ -551,6 +570,11 @@
 	return 0;
 }
 
+static int s5h1411_sleep(struct dvb_frontend *fe)
+{
+	return s5h1411_set_powerstate(fe, 1);
+}
+
 static int s5h1411_register_reset(struct dvb_frontend *fe)
 {
 	struct s5h1411_state *state = fe->demodulator_priv;
@@ -574,9 +598,6 @@
 
 	s5h1411_enable_modulation(fe, p->u.vsb.modulation);
 
-	/* Allow the demod to settle */
-	msleep(100);
-
 	if (fe->ops.tuner_ops.set_params) {
 		if (fe->ops.i2c_gate_ctrl)
 			fe->ops.i2c_gate_ctrl(fe, 1);
@@ -587,6 +608,10 @@
 			fe->ops.i2c_gate_ctrl(fe, 0);
 	}
 
+	/* Issue a reset to the demod so it knows to resync against the
+	   newly tuned frequency */
+	s5h1411_softreset(fe);
+
 	return 0;
 }
 
@@ -599,7 +624,7 @@
 
 	dprintk("%s()\n", __func__);
 
-	s5h1411_sleep(fe, 0);
+	s5h1411_set_powerstate(fe, 0);
 	s5h1411_register_reset(fe);
 
 	for (i = 0; i < ARRAY_SIZE(init_tab); i++)
@@ -610,12 +635,17 @@
 	/* The datasheet says that after initialisation, VSB is default */
 	state->current_modulation = VSB_8;
 
+	/* Although the datasheet says it's in VSB, empirical evidence
+	   shows problems getting lock on the first tuning request.  Make
+	   sure we call enable_modulation the first time around */
+	state->first_tune = 1;
+
 	if (state->config->output_mode == S5H1411_SERIAL_OUTPUT)
 		/* Serial */
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xbd, 0x1101);
+		s5h1411_set_serialmode(fe, 1);
 	else
 		/* Parallel */
-		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xbd, 0x1001);
+		s5h1411_set_serialmode(fe, 0);
 
 	s5h1411_set_spectralinversion(fe, state->config->inversion);
 	s5h1411_set_if_freq(fe, state->config->vsb_if);
@@ -637,28 +667,29 @@
 
 	*status = 0;
 
-	/* Get the demodulator status */
-	reg = (s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf2) >> 15)
-		& 0x0001;
-	if (reg)
-		*status |= FE_HAS_LOCK | FE_HAS_CARRIER | FE_HAS_SIGNAL;
+	/* Register F2 bit 15 = Master Lock, removed */
 
 	switch (state->current_modulation) {
 	case QAM_64:
 	case QAM_256:
 		reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf0);
-		if (reg & 0x100)
-			*status |= FE_HAS_VITERBI;
-		if (reg & 0x10)
-			*status |= FE_HAS_SYNC;
+		if (reg & 0x10) /* QAM FEC Lock */
+			*status |= FE_HAS_SYNC | FE_HAS_LOCK;
+		if (reg & 0x100) /* QAM EQ Lock */
+			*status |= FE_HAS_VITERBI | FE_HAS_CARRIER | FE_HAS_SIGNAL;
+
 		break;
 	case VSB_8:
-		reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0x5e);
-		if (reg & 0x0001)
-			*status |= FE_HAS_SYNC;
 		reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf2);
-		if (reg & 0x1000)
-			*status |= FE_HAS_VITERBI;
+		if (reg & 0x1000) /* FEC Lock */
+			*status |= FE_HAS_SYNC | FE_HAS_LOCK;
+		if (reg & 0x2000) /* EQ Lock */
+			*status |= FE_HAS_VITERBI | FE_HAS_CARRIER | FE_HAS_SIGNAL;
+
+		reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0x53);
+		if (reg & 0x1) /* AFC Lock */
+			*status |= FE_HAS_SIGNAL;
+
 		break;
 	default:
 		return -EINVAL;
@@ -863,6 +894,7 @@
 	},
 
 	.init                 = s5h1411_init,
+	.sleep                = s5h1411_sleep,
 	.i2c_gate_ctrl        = s5h1411_i2c_gate_ctrl,
 	.set_frontend         = s5h1411_set_frontend,
 	.get_frontend         = s5h1411_get_frontend,
diff --git a/drivers/media/dvb/frontends/s5h1411.h b/drivers/media/dvb/frontends/s5h1411.h
index 7d542bc..45ec0f8 100644
--- a/drivers/media/dvb/frontends/s5h1411.h
+++ b/drivers/media/dvb/frontends/s5h1411.h
@@ -47,7 +47,7 @@
 	u16 mpeg_timing;
 
 	/* IF Freq for QAM and VSB in KHz */
-#define S5H1411_IF_2500  2500
+#define S5H1411_IF_3250  3250
 #define S5H1411_IF_3500  3500
 #define S5H1411_IF_4000  4000
 #define S5H1411_IF_5380  5380
diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c
index 78f5694..a5ca176 100644
--- a/drivers/media/radio/dsbr100.c
+++ b/drivers/media/radio/dsbr100.c
@@ -171,11 +171,11 @@
 	if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
 			USB_REQ_GET_STATUS,
 			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 ||
+			0x00, 0xC7, radio->transfer_buffer, 8, 300) < 0 ||
 	usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
 			DSB100_ONOFF,
 			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			0x01, 0x00, radio->transfer_buffer, 8, 300)<0)
+			0x01, 0x00, radio->transfer_buffer, 8, 300) < 0)
 		return -1;
 	radio->muted=0;
 	return (radio->transfer_buffer)[0];
@@ -188,11 +188,11 @@
 	if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
 			USB_REQ_GET_STATUS,
 			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 ||
+			0x16, 0x1C, radio->transfer_buffer, 8, 300) < 0 ||
 	usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
 			DSB100_ONOFF,
 			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			0x00, 0x00, radio->transfer_buffer, 8, 300)<0)
+			0x00, 0x00, radio->transfer_buffer, 8, 300) < 0)
 		return -1;
 	radio->muted=1;
 	return (radio->transfer_buffer)[0];
@@ -201,24 +201,24 @@
 /* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */
 static int dsbr100_setfreq(struct dsbr100_device *radio, int freq)
 {
-	freq = (freq/16*80)/1000+856;
+	freq = (freq / 16 * 80) / 1000 + 856;
 	if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
 			DSB100_TUNE,
 			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			(freq>>8)&0x00ff, freq&0xff,
-			radio->transfer_buffer, 8, 300)<0 ||
+			(freq >> 8) & 0x00ff, freq & 0xff,
+			radio->transfer_buffer, 8, 300) < 0 ||
 	   usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
 			USB_REQ_GET_STATUS,
 			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 ||
+			0x96, 0xB7, radio->transfer_buffer, 8, 300) < 0 ||
 	usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
 			USB_REQ_GET_STATUS,
 			USB_TYPE_VENDOR | USB_RECIP_DEVICE |  USB_DIR_IN,
-			0x00, 0x24, radio->transfer_buffer, 8, 300)<0) {
+			0x00, 0x24, radio->transfer_buffer, 8, 300) < 0) {
 		radio->stereo = -1;
 		return -1;
 	}
-	radio->stereo = ! ((radio->transfer_buffer)[0]&0x01);
+	radio->stereo = !((radio->transfer_buffer)[0] & 0x01);
 	return (radio->transfer_buffer)[0];
 }
 
@@ -229,10 +229,10 @@
 	if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
 		USB_REQ_GET_STATUS,
 		USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-		0x00 , 0x24, radio->transfer_buffer, 8, 300)<0)
+		0x00 , 0x24, radio->transfer_buffer, 8, 300) < 0)
 		radio->stereo = -1;
 	else
-		radio->stereo = ! (radio->transfer_buffer[0]&0x01);
+		radio->stereo = !(radio->transfer_buffer[0] & 0x01);
 }
 
 
@@ -265,7 +265,7 @@
 {
 	strlcpy(v->driver, "dsbr100", sizeof(v->driver));
 	strlcpy(v->card, "D-Link R-100 USB FM Radio", sizeof(v->card));
-	sprintf(v->bus_info, "ISA");
+	sprintf(v->bus_info, "USB");
 	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER;
 	return 0;
@@ -282,9 +282,9 @@
 	dsbr100_getstat(radio);
 	strcpy(v->name, "FM");
 	v->type = V4L2_TUNER_RADIO;
-	v->rangelow = FREQ_MIN*FREQ_MUL;
-	v->rangehigh = FREQ_MAX*FREQ_MUL;
-	v->rxsubchans = V4L2_TUNER_SUB_MONO|V4L2_TUNER_SUB_STEREO;
+	v->rangelow = FREQ_MIN * FREQ_MUL;
+	v->rangehigh = FREQ_MAX * FREQ_MUL;
+	v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
 	v->capability = V4L2_TUNER_CAP_LOW;
 	if(radio->stereo)
 		v->audmode = V4L2_TUNER_MODE_STEREO;
@@ -309,7 +309,7 @@
 	struct dsbr100_device *radio = video_drvdata(file);
 
 	radio->curfreq = f->frequency;
-	if (dsbr100_setfreq(radio, radio->curfreq)==-1)
+	if (dsbr100_setfreq(radio, radio->curfreq) == -1)
 		dev_warn(&radio->usbdev->dev, "Set frequency failed\n");
 	return 0;
 }
@@ -331,8 +331,7 @@
 
 	for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) {
 		if (qc->id && qc->id == radio_qctrl[i].id) {
-			memcpy(qc, &(radio_qctrl[i]),
-						sizeof(*qc));
+			memcpy(qc, &(radio_qctrl[i]), sizeof(*qc));
 			return 0;
 		}
 	}
@@ -412,19 +411,25 @@
 static int usb_dsbr100_open(struct inode *inode, struct file *file)
 {
 	struct dsbr100_device *radio = video_drvdata(file);
+	int retval;
 
 	lock_kernel();
 	radio->users = 1;
 	radio->muted = 1;
 
-	if (dsbr100_start(radio)<0) {
+	if (dsbr100_start(radio) < 0) {
 		dev_warn(&radio->usbdev->dev,
 			 "Radio did not start up properly\n");
 		radio->users = 0;
 		unlock_kernel();
 		return -EIO;
 	}
-	dsbr100_setfreq(radio, radio->curfreq);
+
+	retval = dsbr100_setfreq(radio, radio->curfreq);
+
+	if (retval == -1)
+		printk(KERN_WARNING KBUILD_MODNAME ": Set frequency failed\n");
+
 	unlock_kernel();
 	return 0;
 }
@@ -485,13 +490,20 @@
 {
 	struct dsbr100_device *radio;
 
-	if (!(radio = kmalloc(sizeof(struct dsbr100_device), GFP_KERNEL)))
+	radio = kmalloc(sizeof(struct dsbr100_device), GFP_KERNEL);
+
+	if (!radio)
 		return -ENOMEM;
-	if (!(radio->transfer_buffer = kmalloc(TB_LEN, GFP_KERNEL))) {
+
+	radio->transfer_buffer = kmalloc(TB_LEN, GFP_KERNEL);
+
+	if (!(radio->transfer_buffer)) {
 		kfree(radio);
 		return -ENOMEM;
 	}
-	if (!(radio->videodev = video_device_alloc())) {
+	radio->videodev = video_device_alloc();
+
+	if (!(radio->videodev)) {
 		kfree(radio->transfer_buffer);
 		kfree(radio);
 		return -ENOMEM;
@@ -501,7 +513,7 @@
 	radio->removed = 0;
 	radio->users = 0;
 	radio->usbdev = interface_to_usbdev(intf);
-	radio->curfreq = FREQ_MIN*FREQ_MUL;
+	radio->curfreq = FREQ_MIN * FREQ_MUL;
 	video_set_drvdata(radio->videodev, radio);
 	if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr) < 0) {
 		dev_warn(&intf->dev, "Could not register video device\n");
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index a33717c..256cbef 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -469,16 +469,21 @@
 {
 	struct amradio_device *radio = video_get_drvdata(video_devdata(file));
 
+	lock_kernel();
+
 	radio->users = 1;
 	radio->muted = 1;
 
 	if (amradio_start(radio) < 0) {
 		warn("Radio did not start up properly");
 		radio->users = 0;
+		unlock_kernel();
 		return -EIO;
 	}
 	if (amradio_setfreq(radio, radio->curfreq) < 0)
 		warn("Set frequency failed");
+
+	unlock_kernel();
 	return 0;
 }
 
diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c
index 218754b..e09b006 100644
--- a/drivers/media/video/arv.c
+++ b/drivers/media/video/arv.c
@@ -866,7 +866,7 @@
 	}
 
 	printk("video%d: Found M64278 VGA (IRQ %d, Freq %dMHz).\n",
-		ar->vdev->minor, M32R_IRQ_INT3, freq);
+		ar->vdev->num, M32R_IRQ_INT3, freq);
 
 	return 0;
 
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 5858bf5..9ec4cec 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -4246,7 +4246,7 @@
 				  video_nr[btv->c.nr]) < 0)
 		goto err;
 	printk(KERN_INFO "bttv%d: registered device video%d\n",
-	       btv->c.nr,btv->video_dev->minor & 0x1f);
+	       btv->c.nr, btv->video_dev->num);
 	if (device_create_file(&btv->video_dev->dev,
 				     &dev_attr_card)<0) {
 		printk(KERN_ERR "bttv%d: device_create_file 'card' "
@@ -4263,7 +4263,7 @@
 				  vbi_nr[btv->c.nr]) < 0)
 		goto err;
 	printk(KERN_INFO "bttv%d: registered device vbi%d\n",
-	       btv->c.nr,btv->vbi_dev->minor & 0x1f);
+	       btv->c.nr, btv->vbi_dev->num);
 
 	if (!btv->has_radio)
 		return 0;
@@ -4275,7 +4275,7 @@
 				  radio_nr[btv->c.nr]) < 0)
 		goto err;
 	printk(KERN_INFO "bttv%d: registered device radio%d\n",
-	       btv->c.nr,btv->radio_dev->minor & 0x1f);
+	       btv->c.nr, btv->radio_dev->num);
 
 	/* all done */
 	return 0;
diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c
index 17aa0ad..0f930d3 100644
--- a/drivers/media/video/c-qcam.c
+++ b/drivers/media/video/c-qcam.c
@@ -815,7 +815,7 @@
 	}
 
 	printk(KERN_INFO "video%d: Colour QuickCam found on %s\n",
-	       qcam->vdev.minor, qcam->pport->name);
+	       qcam->vdev.num, qcam->pport->name);
 
 	qcams[num_cams++] = qcam;
 
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index fc9497b..a8c068e 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -2059,10 +2059,10 @@
 
 	if (!cafe_dfs_root)
 		return;
-	sprintf(fname, "regs-%d", cam->v4ldev.minor);
+	sprintf(fname, "regs-%d", cam->v4ldev.num);
 	cam->dfs_regs = debugfs_create_file(fname, 0444, cafe_dfs_root,
 			cam, &cafe_dfs_reg_ops);
-	sprintf(fname, "cam-%d", cam->v4ldev.minor);
+	sprintf(fname, "cam-%d", cam->v4ldev.num);
 	cam->dfs_cam_regs = debugfs_create_file(fname, 0444, cafe_dfs_root,
 			cam, &cafe_dfs_cam_ops);
 }
diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c
index 1798b77..16c094f 100644
--- a/drivers/media/video/cpia.c
+++ b/drivers/media/video/cpia.c
@@ -1347,7 +1347,7 @@
 	if (!cpia_proc_root || !cam)
 		return;
 
-	snprintf(name, sizeof(name), "video%d", cam->vdev.minor);
+	snprintf(name, sizeof(name), "video%d", cam->vdev.num);
 
 	ent = create_proc_entry(name, S_IFREG|S_IRUGO|S_IWUSR, cpia_proc_root);
 	if (!ent)
@@ -1372,7 +1372,7 @@
 	if (!cam || !cam->proc_entry)
 		return;
 
-	snprintf(name, sizeof(name), "video%d", cam->vdev.minor);
+	snprintf(name, sizeof(name), "video%d", cam->vdev.num);
 	remove_proc_entry(name, cpia_proc_root);
 	cam->proc_entry = NULL;
 }
@@ -4005,7 +4005,7 @@
 	}
 
 #ifdef CONFIG_PROC_FS
-	DBG("destroying /proc/cpia/video%d\n", cam->vdev.minor);
+	DBG("destroying /proc/cpia/video%d\n", cam->vdev.num);
 	destroy_proc_cpia_cam(cam);
 #endif
 	if (!cam->open_count) {
diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c
index 897e8d1..1c6bd63 100644
--- a/drivers/media/video/cpia2/cpia2_v4l.c
+++ b/drivers/media/video/cpia2/cpia2_v4l.c
@@ -1973,7 +1973,7 @@
 	} else {
 		LOG("/dev/video%d removed while open, "
 		    "deferring video_unregister_device\n",
-		    cam->vdev->minor);
+		    cam->vdev->num);
 	}
 }
 
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 085121c..7a1a783 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -613,6 +613,7 @@
 				const struct pci_device_id *pci_id)
 {
 	int retval = 0;
+	int i;
 	int vbi_buf_size;
 	u32 devtype;
 	struct cx18 *cx;
@@ -698,7 +699,8 @@
 
 	/* active i2c  */
 	CX18_DEBUG_INFO("activating i2c...\n");
-	if (init_cx18_i2c(cx)) {
+	retval = init_cx18_i2c(cx);
+	if (retval) {
 		CX18_ERR("Could not initialize i2c\n");
 		goto free_map;
 	}
@@ -836,8 +838,11 @@
 	CX18_ERR("Error %d on initialization\n", retval);
 	cx18_log_statistics(cx);
 
-	kfree(cx18_cards[cx18_cards_active]);
-	cx18_cards[cx18_cards_active] = NULL;
+	i = cx->num;
+	spin_lock(&cx18_cards_lock);
+	kfree(cx18_cards[i]);
+	cx18_cards[i] = NULL;
+	spin_unlock(&cx18_cards_lock);
 	return retval;
 }
 
diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h
index 197d4fb..287a5e8 100644
--- a/drivers/media/video/cx18/cx18-io.h
+++ b/drivers/media/video/cx18/cx18-io.h
@@ -39,7 +39,7 @@
 
 /* Statistics gathering */
 static inline
-void cx18_log_write_retries(struct cx18 *cx, int i, const void *addr)
+void cx18_log_write_retries(struct cx18 *cx, int i, const void __iomem *addr)
 {
 	if (i > CX18_MAX_MMIO_RETRIES)
 		i = CX18_MAX_MMIO_RETRIES;
@@ -48,7 +48,7 @@
 }
 
 static inline
-void cx18_log_read_retries(struct cx18 *cx, int i, const void *addr)
+void cx18_log_read_retries(struct cx18 *cx, int i, const void __iomem *addr)
 {
 	if (i > CX18_MAX_MMIO_RETRIES)
 		i = CX18_MAX_MMIO_RETRIES;
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index 0c8e754..e5ff770 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -200,16 +200,18 @@
 /* Initialize v4l2 variables and register v4l2 devices */
 int cx18_streams_setup(struct cx18 *cx)
 {
-	int type;
+	int type, ret;
 
 	/* Setup V4L2 Devices */
 	for (type = 0; type < CX18_MAX_STREAMS; type++) {
 		/* Prepare device */
-		if (cx18_prep_dev(cx, type))
+		ret = cx18_prep_dev(cx, type);
+		if (ret < 0)
 			break;
 
 		/* Allocate Stream */
-		if (cx18_stream_alloc(&cx->streams[type]))
+		ret = cx18_stream_alloc(&cx->streams[type]);
+		if (ret < 0)
 			break;
 	}
 	if (type == CX18_MAX_STREAMS)
@@ -217,14 +219,14 @@
 
 	/* One or more streams could not be initialized. Clean 'em all up. */
 	cx18_streams_cleanup(cx, 0);
-	return -ENOMEM;
+	return ret;
 }
 
 static int cx18_reg_dev(struct cx18 *cx, int type)
 {
 	struct cx18_stream *s = &cx->streams[type];
 	int vfl_type = cx18_stream_info[type].vfl_type;
-	int num;
+	int num, ret;
 
 	/* TODO: Shouldn't this be a VFL_TYPE_TRANSPORT or something?
 	 * We need a VFL_TYPE_TS defined.
@@ -233,9 +235,10 @@
 		/* just return if no DVB is supported */
 		if ((cx->card->hw_all & CX18_HW_DVB) == 0)
 			return 0;
-		if (cx18_dvb_register(s) < 0) {
+		ret = cx18_dvb_register(s);
+		if (ret < 0) {
 			CX18_ERR("DVB failed to register\n");
-			return -EINVAL;
+			return ret;
 		}
 	}
 
@@ -252,12 +255,13 @@
 	}
 
 	/* Register device. First try the desired minor, then any free one. */
-	if (video_register_device(s->v4l2dev, vfl_type, num)) {
+	ret = video_register_device(s->v4l2dev, vfl_type, num);
+	if (ret < 0) {
 		CX18_ERR("Couldn't register v4l2 device for %s kernel number %d\n",
 			s->name, num);
 		video_device_release(s->v4l2dev);
 		s->v4l2dev = NULL;
-		return -ENOMEM;
+		return ret;
 	}
 	num = s->v4l2dev->num;
 
@@ -290,18 +294,22 @@
 int cx18_streams_register(struct cx18 *cx)
 {
 	int type;
-	int err = 0;
+	int err;
+	int ret = 0;
 
 	/* Register V4L2 devices */
-	for (type = 0; type < CX18_MAX_STREAMS; type++)
-		err |= cx18_reg_dev(cx, type);
+	for (type = 0; type < CX18_MAX_STREAMS; type++) {
+		err = cx18_reg_dev(cx, type);
+		if (err && ret == 0)
+			ret = err;
+	}
 
-	if (err == 0)
+	if (ret == 0)
 		return 0;
 
 	/* One or more streams could not be initialized. Clean 'em all up. */
 	cx18_streams_cleanup(cx, 1);
-	return -ENOMEM;
+	return ret;
 }
 
 /* Unregister v4l2 devices */
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 395c11f..00831f3 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -1815,7 +1815,7 @@
 	cx23885_mc417_init(dev);
 
 	printk(KERN_INFO "%s: registered device video%d [mpeg]\n",
-	       dev->name, dev->v4l_device->minor & 0x1f);
+	       dev->name, dev->v4l_device->num);
 
 	return 0;
 }
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index ab3110d..c742a10 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -1543,7 +1543,7 @@
 		goto fail_unreg;
 	}
 	printk(KERN_INFO "%s/0: registered device video%d [v4l2]\n",
-	       dev->name, dev->video_dev->minor & 0x1f);
+	       dev->name, dev->video_dev->num);
 	/* initial device configuration */
 	mutex_lock(&dev->lock);
 	cx23885_set_tvnorm(dev, dev->tvnorm);
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index e713697..078be63 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -1285,7 +1285,7 @@
 		return err;
 	}
 	printk(KERN_INFO "%s/2: registered device video%d [mpeg]\n",
-	       dev->core->name,dev->mpeg_dev->minor & 0x1f);
+	       dev->core->name, dev->mpeg_dev->num);
 	return 0;
 }
 
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index fbc224f..5bcbb4c 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -3044,8 +3044,8 @@
 
 	memcpy(&core->board, &cx88_boards[core->boardnr], sizeof(core->board));
 
-	if (!core->board.num_frontends)
-		core->board.num_frontends=1;
+	if (!core->board.num_frontends && (core->board.mpeg & CX88_MPEG_DVB))
+		core->board.num_frontends = 1;
 
 	info_printk(core, "subsystem: %04x:%04x, board: %s [card=%d,%s], frontend(s): %d\n",
 		pci->subsystem_vendor, pci->subsystem_device, core->board.name,
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index 6968ab0..cf6c30d 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -789,7 +789,7 @@
 		if (fe0->dvb.frontend)
 			fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
 		if (attach_xc3028(0x61, dev) < 0)
-			return -EINVAL;
+			goto frontend_detach;
 		break;
 	case CX88_BOARD_PCHDTV_HD3000:
 		fe0->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000,
@@ -1058,7 +1058,6 @@
 					goto frontend_detach;
 				core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
 				fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
-
 			}
 		}
 		break;
@@ -1110,10 +1109,7 @@
 		&dev->pci->dev, adapter_nr, mfe_shared);
 
 frontend_detach:
-	if (fe0->dvb.frontend) {
-		dvb_frontend_detach(fe0->dvb.frontend);
-		fe0->dvb.frontend = NULL;
-	}
+	videobuf_dvb_dealloc_frontends(&dev->frontends);
 	return -EINVAL;
 }
 
@@ -1246,8 +1242,11 @@
 
 static int cx8802_dvb_remove(struct cx8802_driver *drv)
 {
+	struct cx88_core *core = drv->core;
 	struct cx8802_dev *dev = drv->core->dvbdev;
 
+	dprintk( 1, "%s\n", __func__);
+
 	videobuf_dvb_unregister_bus(&dev->frontends);
 
 	vp3054_i2c_remove(dev);
diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c
index 01de230..1ab691d 100644
--- a/drivers/media/video/cx88/cx88-i2c.c
+++ b/drivers/media/video/cx88/cx88-i2c.c
@@ -116,8 +116,10 @@
 
 void cx88_call_i2c_clients(struct cx88_core *core, unsigned int cmd, void *arg)
 {
+#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
 	struct videobuf_dvb_frontends *f = &core->dvbdev->frontends;
 	struct videobuf_dvb_frontend *fe = NULL;
+#endif
 	if (0 != core->i2c_rc)
 		return;
 
diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c
index 6df5cf3..a1c435b 100644
--- a/drivers/media/video/cx88/cx88-mpeg.c
+++ b/drivers/media/video/cx88/cx88-mpeg.c
@@ -768,8 +768,11 @@
 {
 	struct cx8802_dev *dev;
 	struct cx88_core  *core;
+	int err;
+#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
 	struct videobuf_dvb_frontend *demod;
-	int err,i;
+	int i;
+#endif
 
 	/* general setup */
 	core = cx88_core_get(pci_dev);
@@ -782,11 +785,6 @@
 	if (!core->board.mpeg)
 		goto fail_core;
 
-	if (!core->board.num_frontends) {
-		printk(KERN_ERR "%s() .num_frontends should be non-zero, err = %d\n", __func__, err);
-		goto fail_core;
-	}
-
 	err = -ENOMEM;
 	dev = kzalloc(sizeof(*dev),GFP_KERNEL);
 	if (NULL == dev)
@@ -801,10 +799,12 @@
 	INIT_LIST_HEAD(&dev->drvlist);
 	list_add_tail(&dev->devlist,&cx8802_devlist);
 
+#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
 	mutex_init(&dev->frontends.lock);
 	INIT_LIST_HEAD(&dev->frontends.felist);
 
-	printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends);
+	if (core->board.num_frontends)
+		printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends);
 
 	for (i = 1; i <= core->board.num_frontends; i++) {
 		demod = videobuf_dvb_alloc_frontend(&dev->frontends, i);
@@ -814,6 +814,7 @@
 			goto fail_free;
 		}
 	}
+#endif
 
 	/* Maintain a reference so cx88-video can query the 8802 device. */
 	core->dvbdev = dev;
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 3904b73..61265fd 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1911,7 +1911,7 @@
 		goto fail_unreg;
 	}
 	printk(KERN_INFO "%s/0: registered device video%d [v4l2]\n",
-	       core->name,dev->video_dev->minor & 0x1f);
+	       core->name, dev->video_dev->num);
 
 	dev->vbi_dev = cx88_vdev_init(core,dev->pci,&cx8800_vbi_template,"vbi");
 	err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI,
@@ -1922,7 +1922,7 @@
 		goto fail_unreg;
 	}
 	printk(KERN_INFO "%s/0: registered device vbi%d\n",
-	       core->name,dev->vbi_dev->minor & 0x1f);
+	       core->name, dev->vbi_dev->num);
 
 	if (core->board.radio.type == CX88_RADIO) {
 		dev->radio_dev = cx88_vdev_init(core,dev->pci,
@@ -1935,7 +1935,7 @@
 			goto fail_unreg;
 		}
 		printk(KERN_INFO "%s/0: registered device radio%d\n",
-		       core->name,dev->radio_dev->minor & 0x1f);
+		       core->name, dev->radio_dev->num);
 	}
 
 	/* everything worked */
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index c53649e..a1ab2ef 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -2042,7 +2042,7 @@
 			goto fail_unreg;
 		}
 		em28xx_info("Registered radio device as /dev/radio%d\n",
-			    dev->radio_dev->minor & 0x1f);
+			    dev->radio_dev->num);
 	}
 
 	/* init video dma queues */
diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index 7a85c41..9d0ef96 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -588,7 +588,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "URB timeout reached. The camera is misconfigured. To "
 		       "use it, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -1195,7 +1195,7 @@
 
 	cam = container_of(kref, struct et61x251_device, kref);
 
-	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
+	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num);
 	video_set_drvdata(cam->v4ldev, NULL);
 	video_unregister_device(cam->v4ldev);
 	usb_put_dev(cam->usbdev);
@@ -1237,7 +1237,7 @@
 
 	if (cam->users) {
 		DBG(2, "Device /dev/video%d is already in use",
-		       cam->v4ldev->minor);
+		       cam->v4ldev->num);
 		DBG(3, "Simultaneous opens are not supported");
 		if ((filp->f_flags & O_NONBLOCK) ||
 		    (filp->f_flags & O_NDELAY)) {
@@ -1280,7 +1280,7 @@
 	cam->frame_count = 0;
 	et61x251_empty_framequeues(cam);
 
-	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
+	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num);
 
 out:
 	mutex_unlock(&cam->open_mutex);
@@ -1304,7 +1304,7 @@
 	cam->users--;
 	wake_up_interruptible_nr(&cam->wait_open, 1);
 
-	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
+	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num);
 
 	kref_put(&cam->kref, et61x251_release_resources);
 
@@ -1845,7 +1845,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -1858,7 +1858,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -ENOMEM;
 	}
 
@@ -2068,7 +2068,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -2080,7 +2080,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -ENOMEM;
 	}
 
@@ -2128,7 +2128,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
 		       "problems. To use the camera, close and open "
-		       "/dev/video%d again.", cam->v4ldev->minor);
+		       "/dev/video%d again.", cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -2605,7 +2605,7 @@
 		goto fail;
 	}
 
-	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
+	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num);
 
 	cam->module_param.force_munmap = force_munmap[dev_nr];
 	cam->module_param.frame_timeout = frame_timeout[dev_nr];
@@ -2658,7 +2658,7 @@
 	if (cam->users) {
 		DBG(2, "Device /dev/video%d is open! Deregistration and "
 		       "memory deallocation are deferred.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		cam->state |= DEV_MISCONFIGURED;
 		et61x251_stop_transfer(cam);
 		cam->state |= DEV_DISCONNECTED;
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index aeaa13f..d3648502 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -1211,6 +1211,10 @@
 
 	if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
 		ivtv_call_i2c_clients(itv, VIDIOC_INT_S_STD_OUTPUT, &itv->std);
+		/* Turn off the output signal. The mpeg decoder is not yet
+		   active so without this you would get a green image until the
+		   mpeg decoder becomes active. */
+		ivtv_saa7127(itv, VIDIOC_STREAMOFF, NULL);
 	}
 
 	/* clear interrupt mask, effectively disabling interrupts */
@@ -1330,6 +1334,10 @@
 	ivtv_s_frequency(NULL, &fh, &vf);
 
 	if (itv->card->v4l2_capabilities & V4L2_CAP_VIDEO_OUTPUT) {
+		/* Turn on the TV-out: ivtv_init_mpeg_decoder() initializes
+		   the mpeg decoder so now the saa7127 receives a proper
+		   signal. */
+		ivtv_saa7127(itv, VIDIOC_STREAMON, NULL);
 		ivtv_init_mpeg_decoder(itv);
 	}
 	ivtv_s_std(NULL, &fh, &itv->tuner_std);
@@ -1366,6 +1374,10 @@
 
 		/* Stop all decoding */
 		IVTV_DEBUG_INFO("Stopping decoding\n");
+
+		/* Turn off the TV-out */
+		if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)
+			ivtv_saa7127(itv, VIDIOC_STREAMOFF, NULL);
 		if (atomic_read(&itv->decoding) > 0) {
 			int type;
 
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index 24700c2..41dbbe9 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -726,6 +726,7 @@
 {
 	return ivtv_call_i2c_client(itv, IVTV_SAA7127_I2C_ADDR, cmd, arg);
 }
+EXPORT_SYMBOL(ivtv_saa7127);
 
 int ivtv_saa717x(struct ivtv *itv, unsigned int cmd, void *arg)
 {
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index 208fb54..4bae38d 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -1756,12 +1756,12 @@
 	return 0;
 }
 
-static int ivtv_serialized_ioctl(struct ivtv *itv, struct inode *inode, struct file *filp,
+static long ivtv_serialized_ioctl(struct ivtv *itv, struct file *filp,
 		unsigned int cmd, unsigned long arg)
 {
 	struct video_device *vfd = video_devdata(filp);
 	struct ivtv_open_id *id = (struct ivtv_open_id *)filp->private_data;
-	int ret;
+	long ret;
 
 	/* Filter dvb ioctls that cannot be handled by the v4l ioctl framework */
 	switch (cmd) {
@@ -1830,20 +1830,19 @@
 
 	if (ivtv_debug & IVTV_DBGFLG_IOCTL)
 		vfd->debug = V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG;
-	ret = video_ioctl2(inode, filp, cmd, arg);
+	ret = __video_ioctl2(filp, cmd, arg);
 	vfd->debug = 0;
 	return ret;
 }
 
-int ivtv_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-		    unsigned long arg)
+long ivtv_v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	struct ivtv_open_id *id = (struct ivtv_open_id *)filp->private_data;
 	struct ivtv *itv = id->itv;
-	int res;
+	long res;
 
 	mutex_lock(&itv->serialize_lock);
-	res = ivtv_serialized_ioctl(itv, inode, filp, cmd, arg);
+	res = ivtv_serialized_ioctl(itv, filp, cmd, arg);
 	mutex_unlock(&itv->serialize_lock);
 	return res;
 }
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.h b/drivers/media/video/ivtv/ivtv-ioctl.h
index 7018858..58f0034 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.h
+++ b/drivers/media/video/ivtv/ivtv-ioctl.h
@@ -30,7 +30,6 @@
 int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std);
 int ivtv_s_frequency(struct file *file, void *fh, struct v4l2_frequency *vf);
 int ivtv_s_input(struct file *file, void *fh, unsigned int inp);
-int ivtv_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-		    unsigned long arg);
+long ivtv_v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
 
 #endif
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index 5bbf31e..9b7aa79 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -48,7 +48,7 @@
 	.read = ivtv_v4l2_read,
 	.write = ivtv_v4l2_write,
 	.open = ivtv_v4l2_open,
-	.ioctl = ivtv_v4l2_ioctl,
+	.unlocked_ioctl = ivtv_v4l2_ioctl,
 	.compat_ioctl = v4l_compat_ioctl32,
 	.release = ivtv_v4l2_close,
 	.poll = ivtv_v4l2_enc_poll,
@@ -59,7 +59,7 @@
 	.read = ivtv_v4l2_read,
 	.write = ivtv_v4l2_write,
 	.open = ivtv_v4l2_open,
-	.ioctl = ivtv_v4l2_ioctl,
+	.unlocked_ioctl = ivtv_v4l2_ioctl,
 	.compat_ioctl = v4l_compat_ioctl32,
 	.release = ivtv_v4l2_close,
 	.poll = ivtv_v4l2_dec_poll,
diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c
index 8a4a150..921e281 100644
--- a/drivers/media/video/ivtv/ivtvfb.c
+++ b/drivers/media/video/ivtv/ivtvfb.c
@@ -48,6 +48,7 @@
 #endif
 
 #include "ivtv-driver.h"
+#include "ivtv-i2c.h"
 #include "ivtv-udma.h"
 #include "ivtv-mailbox.h"
 
@@ -894,11 +895,16 @@
 	switch (blank_mode) {
 	case FB_BLANK_UNBLANK:
 		ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 1);
+		ivtv_saa7127(itv, VIDIOC_STREAMON, NULL);
 		break;
 	case FB_BLANK_NORMAL:
 	case FB_BLANK_HSYNC_SUSPEND:
 	case FB_BLANK_VSYNC_SUSPEND:
+		ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 0);
+		ivtv_saa7127(itv, VIDIOC_STREAMON, NULL);
+		break;
 	case FB_BLANK_POWERDOWN:
+		ivtv_saa7127(itv, VIDIOC_STREAMOFF, NULL);
 		ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 0);
 		break;
 	}
diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/drivers/media/video/pvrusb2/pvrusb2-encoder.c
index a1252d6..273d2a1 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-encoder.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-encoder.c
@@ -402,6 +402,10 @@
 	ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 0,3,0,0);
 	ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4,15,0,0,0);
 
+	/* prevent the PTSs from slowly drifting away in the generated
+	   MPEG stream */
+	ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC, 2, 4, 1);
+
 	return ret;
 }
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 94265bd..5b81ba4 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -60,7 +60,6 @@
 static DEFINE_MUTEX(pvr2_unit_mtx);
 
 static int ctlchg;
-static int initusbreset = 1;
 static int procreload;
 static int tuner[PVR_NUM] = { [0 ... PVR_NUM-1] = -1 };
 static int tolerance[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 };
@@ -71,8 +70,6 @@
 MODULE_PARM_DESC(ctlchg, "0=optimize ctl change 1=always accept new ctl value");
 module_param(init_pause_msec, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(init_pause_msec, "hardware initialization settling delay");
-module_param(initusbreset, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(initusbreset, "Do USB reset device on probe");
 module_param(procreload, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(procreload,
 		 "Attempt init failure recovery with firmware reload");
@@ -1967,9 +1964,6 @@
 	}
 	hdw->fw1_state = FW1_STATE_OK;
 
-	if (initusbreset) {
-		pvr2_hdw_device_reset(hdw);
-	}
 	if (!pvr2_hdw_dev_ok(hdw)) return;
 
 	for (idx = 0; idx < hdw->hdw_desc->client_modules.cnt; idx++) {
diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
index f048d80..97ed959 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
@@ -168,7 +168,7 @@
  * This is part of Video 4 Linux API. The procedure handles ioctl() calls.
  *
  */
-static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file,
+static int __pvr2_v4l2_do_ioctl(struct file *file,
 			      unsigned int cmd, void *arg)
 {
 	struct pvr2_v4l2_fh *fh = file->private_data;
@@ -863,8 +863,8 @@
 #endif
 
 	default :
-		ret = v4l_compat_translate_ioctl(inode,file,cmd,
-						 arg,pvr2_v4l2_do_ioctl);
+		ret = v4l_compat_translate_ioctl(file, cmd,
+						 arg, __pvr2_v4l2_do_ioctl);
 	}
 
 	pvr2_hdw_commit_ctl(hdw);
@@ -890,10 +890,15 @@
 	return ret;
 }
 
+static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file,
+			      unsigned int cmd, void *arg)
+{
+	return __pvr2_v4l2_do_ioctl(file, cmd, arg);
+}
 
 static void pvr2_v4l2_dev_destroy(struct pvr2_v4l2_dev *dip)
 {
-	int minor_id = dip->devbase.minor;
+	int num = dip->devbase.num;
 	struct pvr2_hdw *hdw = dip->v4lp->channel.mc_head->hdw;
 	enum pvr2_config cfg = dip->config;
 	int v4l_type = dip->v4l_type;
@@ -909,7 +914,7 @@
 	video_unregister_device(&dip->devbase);
 
 	printk(KERN_INFO "pvrusb2: unregistered device %s%u [%s]\n",
-	       get_v4l_name(v4l_type),minor_id & 0x1f,
+	       get_v4l_name(v4l_type), num,
 	       pvr2_config_get_name(cfg));
 
 }
@@ -1310,7 +1315,7 @@
 	}
 
 	printk(KERN_INFO "pvrusb2: registered device %s%u [%s]\n",
-	       get_v4l_name(dip->v4l_type),dip->devbase.minor & 0x1f,
+	       get_v4l_name(dip->v4l_type), dip->devbase.num,
 	       pvr2_config_get_name(dip->config));
 
 	pvr2_hdw_v4l_store_minor_number(vp->channel.mc_head->hdw,
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index ab28389..f3897a3 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -1795,7 +1795,7 @@
 		goto err;
 	}
 	else {
-		PWC_INFO("Registered as /dev/video%d.\n", pdev->vdev->minor & 0x3F);
+		PWC_INFO("Registered as /dev/video%d.\n", pdev->vdev->num);
 	}
 
 	/* occupy slot */
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index b686bfa..2491844 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -996,7 +996,7 @@
 		goto fail4;
 	}
 	printk(KERN_INFO "%s: registered device video%d [v4l2]\n",
-	       dev->name,dev->video_dev->minor & 0x1f);
+	       dev->name, dev->video_dev->num);
 
 	dev->vbi_dev = vdev_init(dev, &saa7134_video_template, "vbi");
 
@@ -1005,7 +1005,7 @@
 	if (err < 0)
 		goto fail4;
 	printk(KERN_INFO "%s: registered device vbi%d\n",
-	       dev->name,dev->vbi_dev->minor & 0x1f);
+	       dev->name, dev->vbi_dev->num);
 
 	if (card_has_radio(dev)) {
 		dev->radio_dev = vdev_init(dev,&saa7134_radio_template,"radio");
@@ -1014,7 +1014,7 @@
 		if (err < 0)
 			goto fail4;
 		printk(KERN_INFO "%s: registered device radio%d\n",
-		       dev->name,dev->radio_dev->minor & 0x1f);
+		       dev->name, dev->radio_dev->num);
 	}
 
 	/* everything worked */
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index 9a8766a..7f40511 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -534,7 +534,7 @@
 		return err;
 	}
 	printk(KERN_INFO "%s: registered device video%d [mpeg]\n",
-	       dev->name,dev->empress_dev->minor & 0x1f);
+	       dev->name, dev->empress_dev->num);
 
 	videobuf_queue_sg_init(&dev->empress_tsq, &saa7134_ts_qops,
 			    &dev->pci->dev, &dev->slock,
diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c
index ae39491..044a2e9 100644
--- a/drivers/media/video/se401.c
+++ b/drivers/media/video/se401.c
@@ -1412,7 +1412,7 @@
 		return -EIO;
 	}
 	dev_info(&intf->dev, "registered new video device: video%d\n",
-		 se401->vdev.minor);
+		 se401->vdev.num);
 
 	usb_set_intfdata (intf, se401);
 	return 0;
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index 20e30bd..fcd2b62 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -1008,7 +1008,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "URB timeout reached. The camera is misconfigured. "
 		       "To use it, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -1734,7 +1734,7 @@
 
 	cam = container_of(kref, struct sn9c102_device, kref);
 
-	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
+	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num);
 	video_set_drvdata(cam->v4ldev, NULL);
 	video_unregister_device(cam->v4ldev);
 	usb_put_dev(cam->usbdev);
@@ -1792,7 +1792,7 @@
 
 	if (cam->users) {
 		DBG(2, "Device /dev/video%d is already in use",
-		       cam->v4ldev->minor);
+		       cam->v4ldev->num);
 		DBG(3, "Simultaneous opens are not supported");
 		/*
 		   open() must follow the open flags and should block
@@ -1845,7 +1845,7 @@
 	cam->frame_count = 0;
 	sn9c102_empty_framequeues(cam);
 
-	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
+	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num);
 
 out:
 	mutex_unlock(&cam->open_mutex);
@@ -1870,7 +1870,7 @@
 	cam->users--;
 	wake_up_interruptible_nr(&cam->wait_open, 1);
 
-	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
+	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num);
 
 	kref_put(&cam->kref, sn9c102_release_resources);
 
@@ -2432,7 +2432,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -2445,7 +2445,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -ENOMEM;
 	}
 
@@ -2689,7 +2689,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -2701,7 +2701,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -ENOMEM;
 	}
 
@@ -2748,7 +2748,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
 		       "problems. To use the camera, close and open "
-		       "/dev/video%d again.", cam->v4ldev->minor);
+		       "/dev/video%d again.", cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -3348,7 +3348,7 @@
 		goto fail;
 	}
 
-	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
+	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num);
 
 	video_set_drvdata(cam->v4ldev, cam);
 	cam->module_param.force_munmap = force_munmap[dev_nr];
@@ -3402,7 +3402,7 @@
 	if (cam->users) {
 		DBG(2, "Device /dev/video%d is open! Deregistration and "
 		       "memory deallocation are deferred.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		cam->state |= DEV_MISCONFIGURED;
 		sn9c102_stop_transfer(cam);
 		cam->state |= DEV_DISCONNECTED;
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index edaea49..e9eb6d7 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -1331,7 +1331,7 @@
 		STK_ERROR("v4l registration failed\n");
 	else
 		STK_INFO("Syntek USB2.0 Camera is now controlling video device"
-			" /dev/video%d\n", dev->vdev.minor);
+			" /dev/video%d\n", dev->vdev.num);
 	return err;
 }
 
@@ -1426,7 +1426,7 @@
 	stk_remove_sysfs_files(&dev->vdev);
 
 	STK_INFO("Syntek USB2.0 Camera release resources "
-		"video device /dev/video%d\n", dev->vdev.minor);
+		"video device /dev/video%d\n", dev->vdev.num);
 
 	video_unregister_device(&dev->vdev);
 }
diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c
index 9c549d9..328c41b 100644
--- a/drivers/media/video/stv680.c
+++ b/drivers/media/video/stv680.c
@@ -1470,7 +1470,8 @@
 		retval = -EIO;
 		goto error_vdev;
 	}
-	PDEBUG (0, "STV(i): registered new video device: video%d", stv680->vdev->minor);
+	PDEBUG(0, "STV(i): registered new video device: video%d",
+		stv680->vdev->num);
 
 	usb_set_intfdata (intf, stv680);
 	retval = stv680_create_sysfs_files(stv680->vdev);
diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c
index 07cd87d..7c575bb 100644
--- a/drivers/media/video/usbvideo/usbvideo.c
+++ b/drivers/media/video/usbvideo/usbvideo.c
@@ -1059,7 +1059,7 @@
 
 	dev_info(&uvd->dev->dev, "%s on /dev/video%d: canvas=%s videosize=%s\n",
 		 (uvd->handle != NULL) ? uvd->handle->drvName : "???",
-		 uvd->vdev.minor, tmp2, tmp1);
+		 uvd->vdev.num, tmp2, tmp1);
 
 	usb_get_dev(uvd->dev);
 	return 0;
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index 7a127d6..8e2d58b 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -877,7 +877,8 @@
 		return -EIO;
 	}
 
-	printk(KERN_INFO "ViCam webcam driver now controlling video device %d\n",cam->vdev.minor);
+	printk(KERN_INFO "ViCam webcam driver now controlling video device %d\n",
+			cam->vdev.num);
 
 	usb_set_intfdata (intf, cam);
 
diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c
index 92427fd..9907b9a 100644
--- a/drivers/media/video/usbvision/usbvision-i2c.c
+++ b/drivers/media/video/usbvision/usbvision-i2c.c
@@ -236,7 +236,7 @@
 	       sizeof(struct i2c_client));
 
 	sprintf(usbvision->i2c_adap.name + strlen(usbvision->i2c_adap.name),
-		" #%d", usbvision->vdev->minor & 0x1f);
+		" #%d", usbvision->vdev->num);
 	PDEBUG(DBG_I2C,"Adaptername: %s", usbvision->i2c_adap.name);
 	usbvision->i2c_adap.dev.parent = &usbvision->dev->dev;
 
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 77aeb39..d185b57 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -1440,7 +1440,7 @@
 	// vbi Device:
 	if (usbvision->vbi) {
 		PDEBUG(DBG_PROBE, "unregister /dev/vbi%d [v4l2]",
-		       usbvision->vbi->minor & 0x1f);
+		       usbvision->vbi->num);
 		if (usbvision->vbi->minor != -1) {
 			video_unregister_device(usbvision->vbi);
 		} else {
@@ -1452,7 +1452,7 @@
 	// Radio Device:
 	if (usbvision->rdev) {
 		PDEBUG(DBG_PROBE, "unregister /dev/radio%d [v4l2]",
-		       usbvision->rdev->minor & 0x1f);
+		       usbvision->rdev->num);
 		if (usbvision->rdev->minor != -1) {
 			video_unregister_device(usbvision->rdev);
 		} else {
@@ -1464,7 +1464,7 @@
 	// Video Device:
 	if (usbvision->vdev) {
 		PDEBUG(DBG_PROBE, "unregister /dev/video%d [v4l2]",
-		       usbvision->vdev->minor & 0x1f);
+		       usbvision->vdev->num);
 		if (usbvision->vdev->minor != -1) {
 			video_unregister_device(usbvision->vdev);
 		} else {
@@ -1490,7 +1490,7 @@
 		goto err_exit;
 	}
 	printk(KERN_INFO "USBVision[%d]: registered USBVision Video device /dev/video%d [v4l2]\n",
-	       usbvision->nr,usbvision->vdev->minor & 0x1f);
+	       usbvision->nr, usbvision->vdev->num);
 
 	// Radio Device:
 	if (usbvision_device_data[usbvision->DevModel].Radio) {
@@ -1507,7 +1507,7 @@
 			goto err_exit;
 		}
 		printk(KERN_INFO "USBVision[%d]: registered USBVision Radio device /dev/radio%d [v4l2]\n",
-		       usbvision->nr, usbvision->rdev->minor & 0x1f);
+		       usbvision->nr, usbvision->rdev->num);
 	}
 	// vbi Device:
 	if (usbvision_device_data[usbvision->DevModel].vbi) {
@@ -1523,7 +1523,7 @@
 			goto err_exit;
 		}
 		printk(KERN_INFO "USBVision[%d]: registered USBVision VBI device /dev/vbi%d [v4l2] (Not Working Yet!)\n",
-		       usbvision->nr,usbvision->vbi->minor & 0x1f);
+		       usbvision->nr, usbvision->vbi->num);
 	}
 	// all done
 	return 0;
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index 78e4c4e..758dfef 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -464,7 +464,7 @@
 	return 0;
 }
 
-static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file,
+static int __uvc_v4l2_do_ioctl(struct file *file,
 		     unsigned int cmd, void *arg)
 {
 	struct video_device *vdev = video_devdata(file);
@@ -978,8 +978,8 @@
 		return uvc_xu_ctrl_query(video, arg, 1);
 
 	default:
-		if ((ret = v4l_compat_translate_ioctl(inode, file, cmd, arg,
-			uvc_v4l2_do_ioctl)) == -ENOIOCTLCMD)
+		if ((ret = v4l_compat_translate_ioctl(file, cmd, arg,
+			__uvc_v4l2_do_ioctl)) == -ENOIOCTLCMD)
 			uvc_trace(UVC_TRACE_IOCTL, "Unknown ioctl 0x%08x\n",
 				  cmd);
 		return ret;
@@ -988,6 +988,12 @@
 	return ret;
 }
 
+static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file,
+			      unsigned int cmd, void *arg)
+{
+	return __uvc_v4l2_do_ioctl(file, cmd, arg);
+}
+
 static int uvc_v4l2_ioctl(struct inode *inode, struct file *file,
 		     unsigned int cmd, unsigned long arg)
 {
diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c
index 928cb40..f13c0a9 100644
--- a/drivers/media/video/v4l1-compat.c
+++ b/drivers/media/video/v4l1-compat.c
@@ -57,8 +57,7 @@
  */
 
 static int
-get_v4l_control(struct inode            *inode,
-		struct file             *file,
+get_v4l_control(struct file             *file,
 		int			cid,
 		v4l2_kioctl             drv)
 {
@@ -67,12 +66,12 @@
 	int			err;
 
 	qctrl2.id = cid;
-	err = drv(inode, file, VIDIOC_QUERYCTRL, &qctrl2);
+	err = drv(file, VIDIOC_QUERYCTRL, &qctrl2);
 	if (err < 0)
 		dprintk("VIDIOC_QUERYCTRL: %d\n", err);
 	if (err == 0 && !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED)) {
 		ctrl2.id = qctrl2.id;
-		err = drv(inode, file, VIDIOC_G_CTRL, &ctrl2);
+		err = drv(file, VIDIOC_G_CTRL, &ctrl2);
 		if (err < 0) {
 			dprintk("VIDIOC_G_CTRL: %d\n", err);
 			return 0;
@@ -85,8 +84,7 @@
 }
 
 static int
-set_v4l_control(struct inode            *inode,
-		struct file             *file,
+set_v4l_control(struct file             *file,
 		int			cid,
 		int			value,
 		v4l2_kioctl             drv)
@@ -96,7 +94,7 @@
 	int			err;
 
 	qctrl2.id = cid;
-	err = drv(inode, file, VIDIOC_QUERYCTRL, &qctrl2);
+	err = drv(file, VIDIOC_QUERYCTRL, &qctrl2);
 	if (err < 0)
 		dprintk("VIDIOC_QUERYCTRL: %d\n", err);
 	if (err == 0 &&
@@ -114,7 +112,7 @@
 			 + 32767)
 			/ 65535;
 		ctrl2.value += qctrl2.minimum;
-		err = drv(inode, file, VIDIOC_S_CTRL, &ctrl2);
+		err = drv(file, VIDIOC_S_CTRL, &ctrl2);
 		if (err < 0)
 			dprintk("VIDIOC_S_CTRL: %d\n", err);
 	}
@@ -222,7 +220,6 @@
 }
 
 static int count_inputs(
-			struct inode *inode,
 			struct file *file,
 			v4l2_kioctl drv)
 {
@@ -232,14 +229,13 @@
 	for (i = 0;; i++) {
 		memset(&input2, 0, sizeof(input2));
 		input2.index = i;
-		if (0 != drv(inode, file, VIDIOC_ENUMINPUT, &input2))
+		if (0 != drv(file, VIDIOC_ENUMINPUT, &input2))
 			break;
 	}
 	return i;
 }
 
 static int check_size(
-		struct inode *inode,
 		struct file *file,
 		v4l2_kioctl drv,
 		int *maxw,
@@ -252,14 +248,14 @@
 	memset(&fmt2, 0, sizeof(fmt2));
 
 	desc2.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	if (0 != drv(inode, file, VIDIOC_ENUM_FMT, &desc2))
+	if (0 != drv(file, VIDIOC_ENUM_FMT, &desc2))
 		goto done;
 
 	fmt2.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 	fmt2.fmt.pix.width       = 10000;
 	fmt2.fmt.pix.height      = 10000;
 	fmt2.fmt.pix.pixelformat = desc2.pixelformat;
-	if (0 != drv(inode, file, VIDIOC_TRY_FMT, &fmt2))
+	if (0 != drv(file, VIDIOC_TRY_FMT, &fmt2))
 		goto done;
 
 	*maxw = fmt2.fmt.pix.width;
@@ -273,7 +269,6 @@
 
 static noinline int v4l1_compat_get_capabilities(
 					struct video_capability *cap,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
@@ -289,13 +284,13 @@
 	memset(cap, 0, sizeof(*cap));
 	memset(&fbuf, 0, sizeof(fbuf));
 
-	err = drv(inode, file, VIDIOC_QUERYCAP, cap2);
+	err = drv(file, VIDIOC_QUERYCAP, cap2);
 	if (err < 0) {
 		dprintk("VIDIOCGCAP / VIDIOC_QUERYCAP: %d\n", err);
 		goto done;
 	}
 	if (cap2->capabilities & V4L2_CAP_VIDEO_OVERLAY) {
-		err = drv(inode, file, VIDIOC_G_FBUF, &fbuf);
+		err = drv(file, VIDIOC_G_FBUF, &fbuf);
 		if (err < 0) {
 			dprintk("VIDIOCGCAP / VIDIOC_G_FBUF: %d\n", err);
 			memset(&fbuf, 0, sizeof(fbuf));
@@ -317,8 +312,8 @@
 	if (fbuf.capability & V4L2_FBUF_CAP_LIST_CLIPPING)
 		cap->type |= VID_TYPE_CLIPPING;
 
-	cap->channels  = count_inputs(inode, file, drv);
-	check_size(inode, file, drv,
+	cap->channels  = count_inputs(file, drv);
+	check_size(file, drv,
 		   &cap->maxwidth, &cap->maxheight);
 	cap->audios    =  0; /* FIXME */
 	cap->minwidth  = 48; /* FIXME */
@@ -331,7 +326,6 @@
 
 static noinline int v4l1_compat_get_frame_buffer(
 					struct video_buffer *buffer,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
@@ -341,7 +335,7 @@
 	memset(buffer, 0, sizeof(*buffer));
 	memset(&fbuf, 0, sizeof(fbuf));
 
-	err = drv(inode, file, VIDIOC_G_FBUF, &fbuf);
+	err = drv(file, VIDIOC_G_FBUF, &fbuf);
 	if (err < 0) {
 		dprintk("VIDIOCGFBUF / VIDIOC_G_FBUF: %d\n", err);
 		goto done;
@@ -386,7 +380,6 @@
 
 static noinline int v4l1_compat_set_frame_buffer(
 					struct video_buffer *buffer,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
@@ -415,7 +408,7 @@
 		break;
 	}
 	fbuf.fmt.bytesperline = buffer->bytesperline;
-	err = drv(inode, file, VIDIOC_S_FBUF, &fbuf);
+	err = drv(file, VIDIOC_S_FBUF, &fbuf);
 	if (err < 0)
 		dprintk("VIDIOCSFBUF / VIDIOC_S_FBUF: %d\n", err);
 	return err;
@@ -423,7 +416,6 @@
 
 static noinline int v4l1_compat_get_win_cap_dimensions(
 					struct video_window *win,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
@@ -438,7 +430,7 @@
 	memset(win, 0, sizeof(*win));
 
 	fmt->type = V4L2_BUF_TYPE_VIDEO_OVERLAY;
-	err = drv(inode, file, VIDIOC_G_FMT, fmt);
+	err = drv(file, VIDIOC_G_FMT, fmt);
 	if (err < 0)
 		dprintk("VIDIOCGWIN / VIDIOC_G_WIN: %d\n", err);
 	if (err == 0) {
@@ -453,7 +445,7 @@
 	}
 
 	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(inode, file, VIDIOC_G_FMT, fmt);
+	err = drv(file, VIDIOC_G_FMT, fmt);
 	if (err < 0) {
 		dprintk("VIDIOCGWIN / VIDIOC_G_FMT: %d\n", err);
 		goto done;
@@ -472,7 +464,6 @@
 
 static noinline int v4l1_compat_set_win_cap_dimensions(
 					struct video_window *win,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
@@ -485,8 +476,8 @@
 		return err;
 	}
 	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	drv(inode, file, VIDIOC_STREAMOFF, &fmt->type);
-	err1 = drv(inode, file, VIDIOC_G_FMT, fmt);
+	drv(file, VIDIOC_STREAMOFF, &fmt->type);
+	err1 = drv(file, VIDIOC_G_FMT, fmt);
 	if (err1 < 0)
 		dprintk("VIDIOCSWIN / VIDIOC_G_FMT: %d\n", err1);
 	if (err1 == 0) {
@@ -494,7 +485,7 @@
 		fmt->fmt.pix.height = win->height;
 		fmt->fmt.pix.field  = V4L2_FIELD_ANY;
 		fmt->fmt.pix.bytesperline = 0;
-		err = drv(inode, file, VIDIOC_S_FMT, fmt);
+		err = drv(file, VIDIOC_S_FMT, fmt);
 		if (err < 0)
 			dprintk("VIDIOCSWIN / VIDIOC_S_FMT #1: %d\n",
 				err);
@@ -511,7 +502,7 @@
 	fmt->fmt.win.chromakey = win->chromakey;
 	fmt->fmt.win.clips     = (void __user *)win->clips;
 	fmt->fmt.win.clipcount = win->clipcount;
-	err2 = drv(inode, file, VIDIOC_S_FMT, fmt);
+	err2 = drv(file, VIDIOC_S_FMT, fmt);
 	if (err2 < 0)
 		dprintk("VIDIOCSWIN / VIDIOC_S_FMT #2: %d\n", err2);
 
@@ -525,7 +516,6 @@
 
 static noinline int v4l1_compat_turn_preview_on_off(
 					int *on,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
@@ -536,9 +526,9 @@
 		/* dirty hack time.  But v4l1 has no STREAMOFF
 		 * equivalent in the API, and this one at
 		 * least comes close ... */
-		drv(inode, file, VIDIOC_STREAMOFF, &captype);
+		drv(file, VIDIOC_STREAMOFF, &captype);
 	}
-	err = drv(inode, file, VIDIOC_OVERLAY, on);
+	err = drv(file, VIDIOC_OVERLAY, on);
 	if (err < 0)
 		dprintk("VIDIOCCAPTURE / VIDIOC_PREVIEW: %d\n", err);
 	return err;
@@ -546,7 +536,6 @@
 
 static noinline int v4l1_compat_get_input_info(
 					struct video_channel *chan,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
@@ -556,7 +545,7 @@
 
 	memset(&input2, 0, sizeof(input2));
 	input2.index = chan->channel;
-	err = drv(inode, file, VIDIOC_ENUMINPUT, &input2);
+	err = drv(file, VIDIOC_ENUMINPUT, &input2);
 	if (err < 0) {
 		dprintk("VIDIOCGCHAN / VIDIOC_ENUMINPUT: "
 			"channel=%d err=%d\n", chan->channel, err);
@@ -578,7 +567,7 @@
 		break;
 	}
 	chan->norm = 0;
-	err = drv(inode, file, VIDIOC_G_STD, &sid);
+	err = drv(file, VIDIOC_G_STD, &sid);
 	if (err < 0)
 		dprintk("VIDIOCGCHAN / VIDIOC_G_STD: %d\n", err);
 	if (err == 0) {
@@ -595,14 +584,13 @@
 
 static noinline int v4l1_compat_set_input(
 					struct video_channel *chan,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
 	int err;
 	v4l2_std_id sid = 0;
 
-	err = drv(inode, file, VIDIOC_S_INPUT, &chan->channel);
+	err = drv(file, VIDIOC_S_INPUT, &chan->channel);
 	if (err < 0)
 		dprintk("VIDIOCSCHAN / VIDIOC_S_INPUT: %d\n", err);
 	switch (chan->norm) {
@@ -617,7 +605,7 @@
 		break;
 	}
 	if (0 != sid) {
-		err = drv(inode, file, VIDIOC_S_STD, &sid);
+		err = drv(file, VIDIOC_S_STD, &sid);
 		if (err < 0)
 			dprintk("VIDIOCSCHAN / VIDIOC_S_STD: %d\n", err);
 	}
@@ -626,7 +614,6 @@
 
 static noinline int v4l1_compat_get_picture(
 					struct video_picture *pict,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
@@ -639,19 +626,19 @@
 		return err;
 	}
 
-	pict->brightness = get_v4l_control(inode, file,
+	pict->brightness = get_v4l_control(file,
 					   V4L2_CID_BRIGHTNESS, drv);
-	pict->hue = get_v4l_control(inode, file,
+	pict->hue = get_v4l_control(file,
 				    V4L2_CID_HUE, drv);
-	pict->contrast = get_v4l_control(inode, file,
+	pict->contrast = get_v4l_control(file,
 					 V4L2_CID_CONTRAST, drv);
-	pict->colour = get_v4l_control(inode, file,
+	pict->colour = get_v4l_control(file,
 				       V4L2_CID_SATURATION, drv);
-	pict->whiteness = get_v4l_control(inode, file,
+	pict->whiteness = get_v4l_control(file,
 					  V4L2_CID_WHITENESS, drv);
 
 	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(inode, file, VIDIOC_G_FMT, fmt);
+	err = drv(file, VIDIOC_G_FMT, fmt);
 	if (err < 0) {
 		dprintk("VIDIOCGPICT / VIDIOC_G_FMT: %d\n", err);
 		goto done;
@@ -669,7 +656,6 @@
 
 static noinline int v4l1_compat_set_picture(
 					struct video_picture *pict,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
@@ -685,15 +671,15 @@
 	}
 	memset(&fbuf, 0, sizeof(fbuf));
 
-	set_v4l_control(inode, file,
+	set_v4l_control(file,
 			V4L2_CID_BRIGHTNESS, pict->brightness, drv);
-	set_v4l_control(inode, file,
+	set_v4l_control(file,
 			V4L2_CID_HUE, pict->hue, drv);
-	set_v4l_control(inode, file,
+	set_v4l_control(file,
 			V4L2_CID_CONTRAST, pict->contrast, drv);
-	set_v4l_control(inode, file,
+	set_v4l_control(file,
 			V4L2_CID_SATURATION, pict->colour, drv);
-	set_v4l_control(inode, file,
+	set_v4l_control(file,
 			V4L2_CID_WHITENESS, pict->whiteness, drv);
 	/*
 	 * V4L1 uses this ioctl to set both memory capture and overlay
@@ -703,7 +689,7 @@
 	 */
 
 	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(inode, file, VIDIOC_G_FMT, fmt);
+	err = drv(file, VIDIOC_G_FMT, fmt);
 	/* If VIDIOC_G_FMT failed, then the driver likely doesn't
 	   support memory capture.  Trying to set the memory capture
 	   parameters would be pointless.  */
@@ -714,13 +700,13 @@
 		 palette_to_pixelformat(pict->palette)) {
 		fmt->fmt.pix.pixelformat = palette_to_pixelformat(
 			pict->palette);
-		mem_err = drv(inode, file, VIDIOC_S_FMT, fmt);
+		mem_err = drv(file, VIDIOC_S_FMT, fmt);
 		if (mem_err < 0)
 			dprintk("VIDIOCSPICT / VIDIOC_S_FMT: %d\n",
 				mem_err);
 	}
 
-	err = drv(inode, file, VIDIOC_G_FBUF, &fbuf);
+	err = drv(file, VIDIOC_G_FBUF, &fbuf);
 	/* If VIDIOC_G_FBUF failed, then the driver likely doesn't
 	   support overlay.  Trying to set the overlay parameters
 	   would be quite pointless.  */
@@ -731,7 +717,7 @@
 		 palette_to_pixelformat(pict->palette)) {
 		fbuf.fmt.pixelformat = palette_to_pixelformat(
 			pict->palette);
-		ovl_err = drv(inode, file, VIDIOC_S_FBUF, &fbuf);
+		ovl_err = drv(file, VIDIOC_S_FBUF, &fbuf);
 		if (ovl_err < 0)
 			dprintk("VIDIOCSPICT / VIDIOC_S_FBUF: %d\n",
 				ovl_err);
@@ -752,7 +738,6 @@
 
 static noinline int v4l1_compat_get_tuner(
 					struct video_tuner *tun,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
@@ -762,7 +747,7 @@
 	v4l2_std_id    		sid;
 
 	memset(&tun2, 0, sizeof(tun2));
-	err = drv(inode, file, VIDIOC_G_TUNER, &tun2);
+	err = drv(file, VIDIOC_G_TUNER, &tun2);
 	if (err < 0) {
 		dprintk("VIDIOCGTUNER / VIDIOC_G_TUNER: %d\n", err);
 		goto done;
@@ -778,7 +763,7 @@
 	for (i = 0; i < 64; i++) {
 		memset(&std2, 0, sizeof(std2));
 		std2.index = i;
-		if (0 != drv(inode, file, VIDIOC_ENUMSTD, &std2))
+		if (0 != drv(file, VIDIOC_ENUMSTD, &std2))
 			break;
 		if (std2.id & V4L2_STD_PAL)
 			tun->flags |= VIDEO_TUNER_PAL;
@@ -788,7 +773,7 @@
 			tun->flags |= VIDEO_TUNER_SECAM;
 	}
 
-	err = drv(inode, file, VIDIOC_G_STD, &sid);
+	err = drv(file, VIDIOC_G_STD, &sid);
 	if (err < 0)
 		dprintk("VIDIOCGTUNER / VIDIOC_G_STD: %d\n", err);
 	if (err == 0) {
@@ -811,7 +796,6 @@
 
 static noinline int v4l1_compat_select_tuner(
 					struct video_tuner *tun,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
@@ -821,7 +805,7 @@
 
 	t.index = tun->tuner;
 
-	err = drv(inode, file, VIDIOC_S_INPUT, &t);
+	err = drv(file, VIDIOC_S_INPUT, &t);
 	if (err < 0)
 		dprintk("VIDIOCSTUNER / VIDIOC_S_INPUT: %d\n", err);
 	return err;
@@ -829,7 +813,6 @@
 
 static noinline int v4l1_compat_get_frequency(
 					unsigned long *freq,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
@@ -838,7 +821,7 @@
 	memset(&freq2, 0, sizeof(freq2));
 
 	freq2.tuner = 0;
-	err = drv(inode, file, VIDIOC_G_FREQUENCY, &freq2);
+	err = drv(file, VIDIOC_G_FREQUENCY, &freq2);
 	if (err < 0)
 		dprintk("VIDIOCGFREQ / VIDIOC_G_FREQUENCY: %d\n", err);
 	if (0 == err)
@@ -848,7 +831,6 @@
 
 static noinline int v4l1_compat_set_frequency(
 					unsigned long *freq,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
@@ -856,9 +838,9 @@
 	struct v4l2_frequency   freq2;
 	memset(&freq2, 0, sizeof(freq2));
 
-	drv(inode, file, VIDIOC_G_FREQUENCY, &freq2);
+	drv(file, VIDIOC_G_FREQUENCY, &freq2);
 	freq2.frequency = *freq;
-	err = drv(inode, file, VIDIOC_S_FREQUENCY, &freq2);
+	err = drv(file, VIDIOC_S_FREQUENCY, &freq2);
 	if (err < 0)
 		dprintk("VIDIOCSFREQ / VIDIOC_S_FREQUENCY: %d\n", err);
 	return err;
@@ -866,7 +848,6 @@
 
 static noinline int v4l1_compat_get_audio(
 					struct video_audio *aud,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
@@ -876,7 +857,7 @@
 	struct v4l2_tuner	tun2;
 	memset(&aud2, 0, sizeof(aud2));
 
-	err = drv(inode, file, VIDIOC_G_AUDIO, &aud2);
+	err = drv(file, VIDIOC_G_AUDIO, &aud2);
 	if (err < 0) {
 		dprintk("VIDIOCGAUDIO / VIDIOC_G_AUDIO: %d\n", err);
 		goto done;
@@ -886,27 +867,27 @@
 	aud->name[sizeof(aud->name) - 1] = 0;
 	aud->audio = aud2.index;
 	aud->flags = 0;
-	i = get_v4l_control(inode, file, V4L2_CID_AUDIO_VOLUME, drv);
+	i = get_v4l_control(file, V4L2_CID_AUDIO_VOLUME, drv);
 	if (i >= 0) {
 		aud->volume = i;
 		aud->flags |= VIDEO_AUDIO_VOLUME;
 	}
-	i = get_v4l_control(inode, file, V4L2_CID_AUDIO_BASS, drv);
+	i = get_v4l_control(file, V4L2_CID_AUDIO_BASS, drv);
 	if (i >= 0) {
 		aud->bass = i;
 		aud->flags |= VIDEO_AUDIO_BASS;
 	}
-	i = get_v4l_control(inode, file, V4L2_CID_AUDIO_TREBLE, drv);
+	i = get_v4l_control(file, V4L2_CID_AUDIO_TREBLE, drv);
 	if (i >= 0) {
 		aud->treble = i;
 		aud->flags |= VIDEO_AUDIO_TREBLE;
 	}
-	i = get_v4l_control(inode, file, V4L2_CID_AUDIO_BALANCE, drv);
+	i = get_v4l_control(file, V4L2_CID_AUDIO_BALANCE, drv);
 	if (i >= 0) {
 		aud->balance = i;
 		aud->flags |= VIDEO_AUDIO_BALANCE;
 	}
-	i = get_v4l_control(inode, file, V4L2_CID_AUDIO_MUTE, drv);
+	i = get_v4l_control(file, V4L2_CID_AUDIO_MUTE, drv);
 	if (i >= 0) {
 		if (i)
 			aud->flags |= VIDEO_AUDIO_MUTE;
@@ -914,13 +895,13 @@
 	}
 	aud->step = 1;
 	qctrl2.id = V4L2_CID_AUDIO_VOLUME;
-	if (drv(inode, file, VIDIOC_QUERYCTRL, &qctrl2) == 0 &&
+	if (drv(file, VIDIOC_QUERYCTRL, &qctrl2) == 0 &&
 	    !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED))
 		aud->step = qctrl2.step;
 	aud->mode = 0;
 
 	memset(&tun2, 0, sizeof(tun2));
-	err = drv(inode, file, VIDIOC_G_TUNER, &tun2);
+	err = drv(file, VIDIOC_G_TUNER, &tun2);
 	if (err < 0) {
 		dprintk("VIDIOCGAUDIO / VIDIOC_G_TUNER: %d\n", err);
 		err = 0;
@@ -939,7 +920,6 @@
 
 static noinline int v4l1_compat_set_audio(
 					struct video_audio *aud,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
@@ -951,24 +931,24 @@
 	memset(&tun2, 0, sizeof(tun2));
 
 	aud2.index = aud->audio;
-	err = drv(inode, file, VIDIOC_S_AUDIO, &aud2);
+	err = drv(file, VIDIOC_S_AUDIO, &aud2);
 	if (err < 0) {
 		dprintk("VIDIOCSAUDIO / VIDIOC_S_AUDIO: %d\n", err);
 		goto done;
 	}
 
-	set_v4l_control(inode, file, V4L2_CID_AUDIO_VOLUME,
+	set_v4l_control(file, V4L2_CID_AUDIO_VOLUME,
 			aud->volume, drv);
-	set_v4l_control(inode, file, V4L2_CID_AUDIO_BASS,
+	set_v4l_control(file, V4L2_CID_AUDIO_BASS,
 			aud->bass, drv);
-	set_v4l_control(inode, file, V4L2_CID_AUDIO_TREBLE,
+	set_v4l_control(file, V4L2_CID_AUDIO_TREBLE,
 			aud->treble, drv);
-	set_v4l_control(inode, file, V4L2_CID_AUDIO_BALANCE,
+	set_v4l_control(file, V4L2_CID_AUDIO_BALANCE,
 			aud->balance, drv);
-	set_v4l_control(inode, file, V4L2_CID_AUDIO_MUTE,
+	set_v4l_control(file, V4L2_CID_AUDIO_MUTE,
 			!!(aud->flags & VIDEO_AUDIO_MUTE), drv);
 
-	err = drv(inode, file, VIDIOC_G_TUNER, &tun2);
+	err = drv(file, VIDIOC_G_TUNER, &tun2);
 	if (err < 0)
 		dprintk("VIDIOCSAUDIO / VIDIOC_G_TUNER: %d\n", err);
 	if (err == 0) {
@@ -985,7 +965,7 @@
 			tun2.audmode = V4L2_TUNER_MODE_LANG2;
 			break;
 		}
-		err = drv(inode, file, VIDIOC_S_TUNER, &tun2);
+		err = drv(file, VIDIOC_S_TUNER, &tun2);
 		if (err < 0)
 			dprintk("VIDIOCSAUDIO / VIDIOC_S_TUNER: %d\n", err);
 	}
@@ -996,7 +976,6 @@
 
 static noinline int v4l1_compat_capture_frame(
 					struct video_mmap *mm,
-					struct inode *inode,
 					struct file *file,
 					v4l2_kioctl drv)
 {
@@ -1013,7 +992,7 @@
 	memset(&buf, 0, sizeof(buf));
 
 	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(inode, file, VIDIOC_G_FMT, fmt);
+	err = drv(file, VIDIOC_G_FMT, fmt);
 	if (err < 0) {
 		dprintk("VIDIOCMCAPTURE / VIDIOC_G_FMT: %d\n", err);
 		goto done;
@@ -1029,7 +1008,7 @@
 			palette_to_pixelformat(mm->format);
 		fmt->fmt.pix.field = V4L2_FIELD_ANY;
 		fmt->fmt.pix.bytesperline = 0;
-		err = drv(inode, file, VIDIOC_S_FMT, fmt);
+		err = drv(file, VIDIOC_S_FMT, fmt);
 		if (err < 0) {
 			dprintk("VIDIOCMCAPTURE / VIDIOC_S_FMT: %d\n", err);
 			goto done;
@@ -1037,17 +1016,17 @@
 	}
 	buf.index = mm->frame;
 	buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(inode, file, VIDIOC_QUERYBUF, &buf);
+	err = drv(file, VIDIOC_QUERYBUF, &buf);
 	if (err < 0) {
 		dprintk("VIDIOCMCAPTURE / VIDIOC_QUERYBUF: %d\n", err);
 		goto done;
 	}
-	err = drv(inode, file, VIDIOC_QBUF, &buf);
+	err = drv(file, VIDIOC_QBUF, &buf);
 	if (err < 0) {
 		dprintk("VIDIOCMCAPTURE / VIDIOC_QBUF: %d\n", err);
 		goto done;
 	}
-	err = drv(inode, file, VIDIOC_STREAMON, &captype);
+	err = drv(file, VIDIOC_STREAMON, &captype);
 	if (err < 0)
 		dprintk("VIDIOCMCAPTURE / VIDIOC_STREAMON: %d\n", err);
 done:
@@ -1057,7 +1036,6 @@
 
 static noinline int v4l1_compat_sync(
 				int *i,
-				struct inode *inode,
 				struct file *file,
 				v4l2_kioctl drv)
 {
@@ -1069,7 +1047,7 @@
 	memset(&buf, 0, sizeof(buf));
 	buf.index = *i;
 	buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(inode, file, VIDIOC_QUERYBUF, &buf);
+	err = drv(file, VIDIOC_QUERYBUF, &buf);
 	if (err < 0) {
 		/*  No such buffer */
 		dprintk("VIDIOCSYNC / VIDIOC_QUERYBUF: %d\n", err);
@@ -1082,7 +1060,7 @@
 	}
 
 	/* make sure capture actually runs so we don't block forever */
-	err = drv(inode, file, VIDIOC_STREAMON, &captype);
+	err = drv(file, VIDIOC_STREAMON, &captype);
 	if (err < 0) {
 		dprintk("VIDIOCSYNC / VIDIOC_STREAMON: %d\n", err);
 		goto done;
@@ -1096,7 +1074,7 @@
 		if (err < 0 ||	/* error or sleep was interrupted  */
 		    err == 0)	/* timeout? Shouldn't occur.  */
 			break;
-		err = drv(inode, file, VIDIOC_QUERYBUF, &buf);
+		err = drv(file, VIDIOC_QUERYBUF, &buf);
 		if (err < 0)
 			dprintk("VIDIOCSYNC / VIDIOC_QUERYBUF: %d\n", err);
 	}
@@ -1104,7 +1082,7 @@
 	if (!(buf.flags & V4L2_BUF_FLAG_DONE)) /* not done */
 		goto done;
 	do {
-		err = drv(inode, file, VIDIOC_DQBUF, &buf);
+		err = drv(file, VIDIOC_DQBUF, &buf);
 		if (err < 0)
 			dprintk("VIDIOCSYNC / VIDIOC_DQBUF: %d\n", err);
 	} while (err == 0 && buf.index != *i);
@@ -1114,7 +1092,6 @@
 
 static noinline int v4l1_compat_get_vbi_format(
 				struct vbi_format *fmt,
-				struct inode *inode,
 				struct file *file,
 				v4l2_kioctl drv)
 {
@@ -1128,7 +1105,7 @@
 	}
 	fmt2->type = V4L2_BUF_TYPE_VBI_CAPTURE;
 
-	err = drv(inode, file, VIDIOC_G_FMT, fmt2);
+	err = drv(file, VIDIOC_G_FMT, fmt2);
 	if (err < 0) {
 		dprintk("VIDIOCGVBIFMT / VIDIOC_G_FMT: %d\n", err);
 		goto done;
@@ -1153,7 +1130,6 @@
 
 static noinline int v4l1_compat_set_vbi_format(
 				struct vbi_format *fmt,
-				struct inode *inode,
 				struct file *file,
 				v4l2_kioctl drv)
 {
@@ -1179,7 +1155,7 @@
 	fmt2->fmt.vbi.start[1]         = fmt->start[1];
 	fmt2->fmt.vbi.count[1]         = fmt->count[1];
 	fmt2->fmt.vbi.flags            = fmt->flags;
-	err = drv(inode, file, VIDIOC_TRY_FMT, fmt2);
+	err = drv(file, VIDIOC_TRY_FMT, fmt2);
 	if (err < 0) {
 		dprintk("VIDIOCSVBIFMT / VIDIOC_TRY_FMT: %d\n", err);
 		goto done;
@@ -1196,7 +1172,7 @@
 		err = -EINVAL;
 		goto done;
 	}
-	err = drv(inode, file, VIDIOC_S_FMT, fmt2);
+	err = drv(file, VIDIOC_S_FMT, fmt2);
 	if (err < 0)
 		dprintk("VIDIOCSVBIFMT / VIDIOC_S_FMT: %d\n", err);
 done:
@@ -1208,8 +1184,7 @@
  *	This function is exported.
  */
 int
-v4l_compat_translate_ioctl(struct inode         *inode,
-			   struct file		*file,
+v4l_compat_translate_ioctl(struct file		*file,
 			   int			cmd,
 			   void			*arg,
 			   v4l2_kioctl          drv)
@@ -1218,64 +1193,64 @@
 
 	switch (cmd) {
 	case VIDIOCGCAP:	/* capability */
-		err = v4l1_compat_get_capabilities(arg, inode, file, drv);
+		err = v4l1_compat_get_capabilities(arg, file, drv);
 		break;
 	case VIDIOCGFBUF: /*  get frame buffer  */
-		err = v4l1_compat_get_frame_buffer(arg, inode, file, drv);
+		err = v4l1_compat_get_frame_buffer(arg, file, drv);
 		break;
 	case VIDIOCSFBUF: /*  set frame buffer  */
-		err = v4l1_compat_set_frame_buffer(arg, inode, file, drv);
+		err = v4l1_compat_set_frame_buffer(arg, file, drv);
 		break;
 	case VIDIOCGWIN: /*  get window or capture dimensions  */
-		err = v4l1_compat_get_win_cap_dimensions(arg, inode, file, drv);
+		err = v4l1_compat_get_win_cap_dimensions(arg, file, drv);
 		break;
 	case VIDIOCSWIN: /*  set window and/or capture dimensions  */
-		err = v4l1_compat_set_win_cap_dimensions(arg, inode, file, drv);
+		err = v4l1_compat_set_win_cap_dimensions(arg, file, drv);
 		break;
 	case VIDIOCCAPTURE: /*  turn on/off preview  */
-		err = v4l1_compat_turn_preview_on_off(arg, inode, file, drv);
+		err = v4l1_compat_turn_preview_on_off(arg, file, drv);
 		break;
 	case VIDIOCGCHAN: /*  get input information  */
-		err = v4l1_compat_get_input_info(arg, inode, file, drv);
+		err = v4l1_compat_get_input_info(arg, file, drv);
 		break;
 	case VIDIOCSCHAN: /*  set input  */
-		err = v4l1_compat_set_input(arg, inode, file, drv);
+		err = v4l1_compat_set_input(arg, file, drv);
 		break;
 	case VIDIOCGPICT: /*  get tone controls & partial capture format  */
-		err = v4l1_compat_get_picture(arg, inode, file, drv);
+		err = v4l1_compat_get_picture(arg, file, drv);
 		break;
 	case VIDIOCSPICT: /*  set tone controls & partial capture format  */
-		err = v4l1_compat_set_picture(arg, inode, file, drv);
+		err = v4l1_compat_set_picture(arg, file, drv);
 		break;
 	case VIDIOCGTUNER: /*  get tuner information  */
-		err = v4l1_compat_get_tuner(arg, inode, file, drv);
+		err = v4l1_compat_get_tuner(arg, file, drv);
 		break;
 	case VIDIOCSTUNER: /*  select a tuner input  */
-		err = v4l1_compat_select_tuner(arg, inode, file, drv);
+		err = v4l1_compat_select_tuner(arg, file, drv);
 		break;
 	case VIDIOCGFREQ: /*  get frequency  */
-		err = v4l1_compat_get_frequency(arg, inode, file, drv);
+		err = v4l1_compat_get_frequency(arg, file, drv);
 		break;
 	case VIDIOCSFREQ: /*  set frequency  */
-		err = v4l1_compat_set_frequency(arg, inode, file, drv);
+		err = v4l1_compat_set_frequency(arg, file, drv);
 		break;
 	case VIDIOCGAUDIO: /*  get audio properties/controls  */
-		err = v4l1_compat_get_audio(arg, inode, file, drv);
+		err = v4l1_compat_get_audio(arg, file, drv);
 		break;
 	case VIDIOCSAUDIO: /*  set audio controls  */
-		err = v4l1_compat_set_audio(arg, inode, file, drv);
+		err = v4l1_compat_set_audio(arg, file, drv);
 		break;
 	case VIDIOCMCAPTURE: /*  capture a frame  */
-		err = v4l1_compat_capture_frame(arg, inode, file, drv);
+		err = v4l1_compat_capture_frame(arg, file, drv);
 		break;
 	case VIDIOCSYNC: /*  wait for a frame  */
-		err = v4l1_compat_sync(arg, inode, file, drv);
+		err = v4l1_compat_sync(arg, file, drv);
 		break;
 	case VIDIOCGVBIFMT: /* query VBI data capture format */
-		err = v4l1_compat_get_vbi_format(arg, inode, file, drv);
+		err = v4l1_compat_get_vbi_format(arg, file, drv);
 		break;
 	case VIDIOCSVBIFMT:
-		err = v4l1_compat_set_vbi_format(arg, inode, file, drv);
+		err = v4l1_compat_set_vbi_format(arg, file, drv);
 		break;
 	default:
 		err = -ENOIOCTLCMD;
diff --git a/drivers/media/video/v4l2-int-device.c b/drivers/media/video/v4l2-int-device.c
index 0e45499..a935bae 100644
--- a/drivers/media/video/v4l2-int-device.c
+++ b/drivers/media/video/v4l2-int-device.c
@@ -32,7 +32,7 @@
 static DEFINE_MUTEX(mutex);
 static LIST_HEAD(int_list);
 
-static void v4l2_int_device_try_attach_all(void)
+void v4l2_int_device_try_attach_all(void)
 {
 	struct v4l2_int_device *m, *s;
 
@@ -66,6 +66,7 @@
 		}
 	}
 }
+EXPORT_SYMBOL_GPL(v4l2_int_device_try_attach_all);
 
 static int ioctl_sort_cmp(const void *a, const void *b)
 {
@@ -144,6 +145,7 @@
 		find_ioctl(d->u.slave, cmd,
 			   (v4l2_int_ioctl_func *)no_such_ioctl_0))(d);
 }
+EXPORT_SYMBOL_GPL(v4l2_int_ioctl_0);
 
 static int no_such_ioctl_1(struct v4l2_int_device *d, void *arg)
 {
@@ -156,5 +158,6 @@
 		find_ioctl(d->u.slave, cmd,
 			   (v4l2_int_ioctl_func *)no_such_ioctl_1))(d, arg);
 }
+EXPORT_SYMBOL_GPL(v4l2_int_ioctl_1);
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index 155c9d7..710e1a4 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -625,13 +625,13 @@
 	return -EINVAL;
 }
 
-static int __video_do_ioctl(struct inode *inode, struct file *file,
+static int __video_do_ioctl(struct file *file,
 		unsigned int cmd, void *arg)
 {
 	struct video_device *vfd = video_devdata(file);
 	const struct v4l2_ioctl_ops *ops = vfd->ioctl_ops;
-	void                 *fh = file->private_data;
-	int                  ret = -EINVAL;
+	void *fh = file->private_data;
+	int ret = -EINVAL;
 
 	if ((vfd->debug & V4L2_DEBUG_IOCTL) &&
 				!(vfd->debug & V4L2_DEBUG_IOCTL_ARG)) {
@@ -675,7 +675,7 @@
 	 V4L2 ioctls.
 	 ********************************************************/
 	if (_IOC_TYPE(cmd) == 'v' && _IOC_NR(cmd) < BASE_VIDIOCPRIVATE)
-		return v4l_compat_translate_ioctl(inode, file, cmd, arg,
+		return v4l_compat_translate_ioctl(file, cmd, arg,
 						__video_do_ioctl);
 #endif
 
@@ -1768,7 +1768,7 @@
 	return ret;
 }
 
-int video_ioctl2(struct inode *inode, struct file *file,
+int __video_ioctl2(struct file *file,
 	       unsigned int cmd, unsigned long arg)
 {
 	char	sbuf[128];
@@ -1832,7 +1832,7 @@
 	}
 
 	/* Handles IOCTL */
-	err = __video_do_ioctl(inode, file, cmd, parg);
+	err = __video_do_ioctl(file, cmd, parg);
 	if (err == -ENOIOCTLCMD)
 		err = -EINVAL;
 	if (is_ext_ctrl) {
@@ -1860,4 +1860,11 @@
 	kfree(mbuf);
 	return err;
 }
+EXPORT_SYMBOL(__video_ioctl2);
+
+int video_ioctl2(struct inode *inode, struct file *file,
+	       unsigned int cmd, unsigned long arg)
+{
+	return __video_ioctl2(file, cmd, arg);
+}
 EXPORT_SYMBOL(video_ioctl2);
diff --git a/drivers/media/video/videobuf-dvb.c b/drivers/media/video/videobuf-dvb.c
index 917277d..0e7dcba 100644
--- a/drivers/media/video/videobuf-dvb.c
+++ b/drivers/media/video/videobuf-dvb.c
@@ -296,29 +296,7 @@
 
 void videobuf_dvb_unregister_bus(struct videobuf_dvb_frontends *f)
 {
-	struct list_head *list, *q;
-	struct videobuf_dvb_frontend *fe;
-
-	mutex_lock(&f->lock);
-	list_for_each_safe(list, q, &f->felist) {
-		fe = list_entry(list, struct videobuf_dvb_frontend, felist);
-		if (fe->dvb.net.dvbdev) {
-			dvb_net_release(&fe->dvb.net);
-			fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx,
-				&fe->dvb.fe_mem);
-			fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx,
-				&fe->dvb.fe_hw);
-			dvb_dmxdev_release(&fe->dvb.dmxdev);
-			dvb_dmx_release(&fe->dvb.demux);
-			dvb_unregister_frontend(fe->dvb.frontend);
-		}
-		if (fe->dvb.frontend)
-			/* always allocated, may have been reset */
-			dvb_frontend_detach(fe->dvb.frontend);
-		list_del(list);
-		kfree(fe);
-	}
-	mutex_unlock(&f->lock);
+	videobuf_dvb_dealloc_frontends(f);
 
 	dvb_unregister_adapter(&f->adapter);
 }
@@ -389,3 +367,31 @@
 	return fe;
 }
 EXPORT_SYMBOL(videobuf_dvb_alloc_frontend);
+
+void videobuf_dvb_dealloc_frontends(struct videobuf_dvb_frontends *f)
+{
+	struct list_head *list, *q;
+	struct videobuf_dvb_frontend *fe;
+
+	mutex_lock(&f->lock);
+	list_for_each_safe(list, q, &f->felist) {
+		fe = list_entry(list, struct videobuf_dvb_frontend, felist);
+		if (fe->dvb.net.dvbdev) {
+			dvb_net_release(&fe->dvb.net);
+			fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx,
+				&fe->dvb.fe_mem);
+			fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx,
+				&fe->dvb.fe_hw);
+			dvb_dmxdev_release(&fe->dvb.dmxdev);
+			dvb_dmx_release(&fe->dvb.demux);
+			dvb_unregister_frontend(fe->dvb.frontend);
+		}
+		if (fe->dvb.frontend)
+			/* always allocated, may have been reset */
+			dvb_frontend_detach(fe->dvb.frontend);
+		list_del(list); /* remove list entry */
+		kfree(fe);	/* free frontend allocation */
+	}
+	mutex_unlock(&f->lock);
+}
+EXPORT_SYMBOL(videobuf_dvb_dealloc_frontends);
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 7d7e51d..e15e48f 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -1163,11 +1163,11 @@
 
 		if (-1 != dev->vfd->minor) {
 			printk(KERN_INFO "%s: unregistering /dev/video%d\n",
-				VIVI_MODULE_NAME, dev->vfd->minor);
+				VIVI_MODULE_NAME, dev->vfd->num);
 			video_unregister_device(dev->vfd);
 		} else {
 			printk(KERN_INFO "%s: releasing /dev/video%d\n",
-				VIVI_MODULE_NAME, dev->vfd->minor);
+				VIVI_MODULE_NAME, dev->vfd->num);
 			video_device_release(dev->vfd);
 		}
 
@@ -1307,7 +1307,7 @@
 
 		dev->vfd = vfd;
 		printk(KERN_INFO "%s: V4L2 device registered as /dev/video%d\n",
-			VIVI_MODULE_NAME, vfd->minor);
+			VIVI_MODULE_NAME, vfd->num);
 	}
 
 	if (ret < 0) {
diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
index dcd45db..4dfb43b 100644
--- a/drivers/media/video/w9968cf.c
+++ b/drivers/media/video/w9968cf.c
@@ -2398,7 +2398,7 @@
 	cam->sensor = CC_UNKNOWN;
 	DBG(1, "Image sensor initialization failed for %s (/dev/video%d). "
 	       "Try to detach and attach this device again",
-	    symbolic(camlist, cam->id), cam->v4ldev->minor)
+	    symbolic(camlist, cam->id), cam->v4ldev->num)
 	return err;
 }
 
@@ -2644,7 +2644,7 @@
 {
 	mutex_lock(&w9968cf_devlist_mutex);
 
-	DBG(2, "V4L device deregistered: /dev/video%d", cam->v4ldev->minor)
+	DBG(2, "V4L device deregistered: /dev/video%d", cam->v4ldev->num)
 
 	video_unregister_device(cam->v4ldev);
 	list_del(&cam->v4llist);
@@ -2679,7 +2679,7 @@
 		DBG(2, "No supported image sensor has been detected by the "
 		       "'ovcamchip' module for the %s (/dev/video%d). Make "
 		       "sure it is loaded *before* (re)connecting the camera.",
-		    symbolic(camlist, cam->id), cam->v4ldev->minor)
+		    symbolic(camlist, cam->id), cam->v4ldev->num)
 		mutex_unlock(&cam->dev_mutex);
 		up_read(&w9968cf_disconnect);
 		return -ENODEV;
@@ -2687,7 +2687,7 @@
 
 	if (cam->users) {
 		DBG(2, "%s (/dev/video%d) has been already occupied by '%s'",
-		    symbolic(camlist, cam->id),cam->v4ldev->minor,cam->command)
+		    symbolic(camlist, cam->id), cam->v4ldev->num, cam->command)
 		if ((filp->f_flags & O_NONBLOCK)||(filp->f_flags & O_NDELAY)) {
 			mutex_unlock(&cam->dev_mutex);
 			up_read(&w9968cf_disconnect);
@@ -2709,7 +2709,7 @@
 	}
 
 	DBG(5, "Opening '%s', /dev/video%d ...",
-	    symbolic(camlist, cam->id), cam->v4ldev->minor)
+	    symbolic(camlist, cam->id), cam->v4ldev->num)
 
 	cam->streaming = 0;
 	cam->misconfigured = 0;
@@ -2947,7 +2947,7 @@
 			.minheight = cam->minheight,
 		};
 		sprintf(cap.name, "W996[87]CF USB Camera #%d",
-			cam->v4ldev->minor);
+			cam->v4ldev->num);
 		cap.maxwidth = (cam->upscaling && w9968cf_vpp)
 			       ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
 				 : cam->maxwidth;
@@ -3567,7 +3567,7 @@
 		goto fail;
 	}
 
-	DBG(2, "V4L device registered as /dev/video%d", cam->v4ldev->minor)
+	DBG(2, "V4L device registered as /dev/video%d", cam->v4ldev->num)
 
 	/* Set some basic constants */
 	w9968cf_configure_camera(cam, udev, mod_id, dev_nr);
@@ -3618,7 +3618,7 @@
 			DBG(2, "The device is open (/dev/video%d)! "
 			       "Process name: %s. Deregistration and memory "
 			       "deallocation are deferred on close.",
-			    cam->v4ldev->minor, cam->command)
+			    cam->v4ldev->num, cam->command)
 			cam->misconfigured = 1;
 			w9968cf_stop_transfer(cam);
 			wake_up_interruptible(&cam->wait_queue);
diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c
index 6a0902b..9fc5817 100644
--- a/drivers/media/video/zc0301/zc0301_core.c
+++ b/drivers/media/video/zc0301/zc0301_core.c
@@ -539,7 +539,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "URB timeout reached. The camera is misconfigured. To "
 		       "use it, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -640,7 +640,7 @@
 {
 	struct zc0301_device *cam = container_of(kref, struct zc0301_device,
 						 kref);
-	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
+	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num);
 	video_set_drvdata(cam->v4ldev, NULL);
 	video_unregister_device(cam->v4ldev);
 	usb_put_dev(cam->usbdev);
@@ -679,7 +679,7 @@
 	}
 
 	if (cam->users) {
-		DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor);
+		DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->num);
 		DBG(3, "Simultaneous opens are not supported");
 		if ((filp->f_flags & O_NONBLOCK) ||
 		    (filp->f_flags & O_NDELAY)) {
@@ -722,7 +722,7 @@
 	cam->frame_count = 0;
 	zc0301_empty_framequeues(cam);
 
-	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
+	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num);
 
 out:
 	mutex_unlock(&cam->open_mutex);
@@ -746,7 +746,7 @@
 	cam->users--;
 	wake_up_interruptible_nr(&cam->wait_open, 1);
 
-	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
+	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num);
 
 	kref_put(&cam->kref, zc0301_release_resources);
 
@@ -1275,7 +1275,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -1288,7 +1288,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -ENOMEM;
 	}
 
@@ -1470,7 +1470,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -1482,7 +1482,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
 		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		return -ENOMEM;
 	}
 
@@ -1529,7 +1529,7 @@
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
 		       "problems. To use the camera, close and open "
-		       "/dev/video%d again.", cam->v4ldev->minor);
+		       "/dev/video%d again.", cam->v4ldev->num);
 		return -EIO;
 	}
 
@@ -2005,7 +2005,7 @@
 		goto fail;
 	}
 
-	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
+	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num);
 
 	cam->module_param.force_munmap = force_munmap[dev_nr];
 	cam->module_param.frame_timeout = frame_timeout[dev_nr];
@@ -2044,7 +2044,7 @@
 	if (cam->users) {
 		DBG(2, "Device /dev/video%d is open! Deregistration and "
 		       "memory deallocation are deferred.",
-		    cam->v4ldev->minor);
+		    cam->v4ldev->num);
 		cam->state |= DEV_MISCONFIGURED;
 		zc0301_stop_transfer(cam);
 		cam->state |= DEV_DISCONNECTED;
diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c
index 7cdac99..a1d81ed 100644
--- a/drivers/media/video/zr364xx.c
+++ b/drivers/media/video/zr364xx.c
@@ -885,7 +885,7 @@
 	usb_set_intfdata(intf, cam);
 
 	dev_info(&udev->dev, DRIVER_DESC " controlling video device %d\n",
-		 cam->vdev->minor);
+		 cam->vdev->num);
 	return 0;
 }
 
diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index 5263913..7911151 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -172,9 +172,9 @@
 
 /*** Block device ***/
 
-static int mspro_block_bd_open(struct inode *inode, struct file *filp)
+static int mspro_block_bd_open(struct block_device *bdev, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
+	struct gendisk *disk = bdev->bd_disk;
 	struct mspro_block_data *msb = disk->private_data;
 	int rc = -ENXIO;
 
@@ -182,7 +182,7 @@
 
 	if (msb && msb->card) {
 		msb->usage_count++;
-		if ((filp->f_mode & FMODE_WRITE) && msb->read_only)
+		if ((mode & FMODE_WRITE) && msb->read_only)
 			rc = -EROFS;
 		else
 			rc = 0;
@@ -218,9 +218,8 @@
 	return 0;
 }
 
-static int mspro_block_bd_release(struct inode *inode, struct file *filp)
+static int mspro_block_bd_release(struct gendisk *disk, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
 	return mspro_block_disk_release(disk);
 }
 
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 9f9354f..d62fd4f 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1760,10 +1760,9 @@
 	case FC:
 		return 40;
 	case SAS:
-		return 10;
 	case SPI:
 	default:
-		return 2;
+		return 10;
 	}
 }
 
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 81483de..11a617a 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -575,9 +575,9 @@
  *
  *	Returns 0 on success or negative error code on failure.
  */
-static int i2o_block_open(struct inode *inode, struct file *file)
+static int i2o_block_open(struct block_device *bdev, fmode_t mode)
 {
-	struct i2o_block_device *dev = inode->i_bdev->bd_disk->private_data;
+	struct i2o_block_device *dev = bdev->bd_disk->private_data;
 
 	if (!dev->i2o_dev)
 		return -ENODEV;
@@ -604,9 +604,8 @@
  *
  *	Returns 0 on success or negative error code on failure.
  */
-static int i2o_block_release(struct inode *inode, struct file *file)
+static int i2o_block_release(struct gendisk *disk, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
 	struct i2o_block_device *dev = disk->private_data;
 	u8 operation;
 
@@ -653,10 +652,10 @@
  *
  *	Return 0 on success or negative error on failure.
  */
-static int i2o_block_ioctl(struct inode *inode, struct file *file,
+static int i2o_block_ioctl(struct block_device *bdev, fmode_t mode,
 			   unsigned int cmd, unsigned long arg)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
+	struct gendisk *disk = bdev->bd_disk;
 	struct i2o_block_device *dev = disk->private_data;
 
 	/* Anyone capable of this syscall can do *real bad* things */
@@ -933,7 +932,7 @@
 	.owner = THIS_MODULE,
 	.open = i2o_block_open,
 	.release = i2o_block_release,
-	.ioctl = i2o_block_ioctl,
+	.locked_ioctl = i2o_block_ioctl,
 	.getgeo = i2o_block_getgeo,
 	.media_changed = i2o_block_media_changed
 };
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 5a79d2d..b550267 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -103,8 +103,20 @@
 	help
 	  Support for Toshiba Mobile IO Controller TC6393XB
 
+config PMIC_DA903X
+	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
+	depends on I2C=y
+	help
+	  Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
+	  ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
+	  usually found on PXA processors-based platforms. This includes
+	  the I2C driver and the core APIs _only_, you have to select
+	  individual components like LCD backlight, voltage regulators,
+	  LEDs and battery-charger under the corresponding menus.
+
 config MFD_WM8400
 	tristate "Support Wolfson Microelectronics WM8400"
+	depends on I2C
 	help
 	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
 	  CODEC.  This driver adds provides common support for accessing
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 68e237b..9a5ad8a 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -17,7 +17,7 @@
 obj-$(CONFIG_MFD_WM8350)	+= wm8350.o
 obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
 
-obj-$(CONFIG_TWL4030_CORE)	+= twl4030-core.o
+obj-$(CONFIG_TWL4030_CORE)	+= twl4030-core.o twl4030-irq.o
 
 obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
 
@@ -30,3 +30,5 @@
 obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-assabet.o
 endif
 obj-$(CONFIG_UCB1400_CORE)	+= ucb1400_core.o
+
+obj-$(CONFIG_PMIC_DA903X)	+= da903x.o
\ No newline at end of file
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 220e437..170f9d4 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1374,31 +1374,31 @@
 static int sm501_plat_probe(struct platform_device *dev)
 {
 	struct sm501_devdata *sm;
-	int err;
+	int ret;
 
 	sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL);
 	if (sm == NULL) {
 		dev_err(&dev->dev, "no memory for device data\n");
-		err = -ENOMEM;
+		ret = -ENOMEM;
 		goto err1;
 	}
 
 	sm->dev = &dev->dev;
 	sm->pdev_id = dev->id;
-	sm->irq = platform_get_irq(dev, 0);
-	sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
-	sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	sm->platdata = dev->dev.platform_data;
 
-	if (sm->irq < 0) {
+	ret = platform_get_irq(dev, 0);
+	if (ret < 0) {
 		dev_err(&dev->dev, "failed to get irq resource\n");
-		err = sm->irq;
 		goto err_res;
 	}
+	sm->irq = ret;
 
+	sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	if (sm->io_res == NULL || sm->mem_res == NULL) {
 		dev_err(&dev->dev, "failed to get IO resource\n");
-		err = -ENOENT;
+		ret = -ENOENT;
 		goto err_res;
 	}
 
@@ -1407,7 +1407,7 @@
 
 	if (sm->regs_claim == NULL) {
 		dev_err(&dev->dev, "cannot claim registers\n");
-		err= -EBUSY;
+		ret = -EBUSY;
 		goto err_res;
 	}
 
@@ -1418,7 +1418,7 @@
 
 	if (sm->regs == NULL) {
 		dev_err(&dev->dev, "cannot remap registers\n");
-		err = -EIO;
+		ret = -EIO;
 		goto err_claim;
 	}
 
@@ -1430,7 +1430,7 @@
  err_res:
 	kfree(sm);
  err1:
-	return err;
+	return ret;
 
 }
 
@@ -1625,8 +1625,7 @@
 		goto err3;
 	}
 
-	sm->regs = ioremap(pci_resource_start(dev, 1),
-			   pci_resource_len(dev, 1));
+	sm->regs = pci_ioremap_bar(dev, 1);
 
 	if (sm->regs == NULL) {
 		dev_err(&dev->dev, "cannot remap registers\n");
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index fd9a016..dd843c4 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -27,15 +27,11 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
-#include <linux/kernel_stat.h>
 #include <linux/init.h>
 #include <linux/mutex.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/random.h>
-#include <linux/kthread.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
@@ -93,26 +89,6 @@
 #define twl_has_usb()	false
 #endif
 
-static inline void activate_irq(int irq)
-{
-#ifdef CONFIG_ARM
-	/* ARM requires an extra step to clear IRQ_NOREQUEST, which it
-	 * sets on behalf of every irq_chip.  Also sets IRQ_NOPROBE.
-	 */
-	set_irq_flags(irq, IRQF_VALID);
-#else
-	/* same effect on other architectures */
-	set_irq_noprobe(irq);
-#endif
-}
-
-/* Primary Interrupt Handler on TWL4030 Registers */
-
-/* Register Definitions */
-
-#define REG_PIH_ISR_P1			(0x1)
-#define REG_PIH_ISR_P2			(0x2)
-#define REG_PIH_SIR			(0x3)
 
 /* Triton Core internal information (BEGIN) */
 
@@ -175,138 +151,6 @@
 
 /*----------------------------------------------------------------------*/
 
-/**
- * struct twl4030_mod_iregs - TWL module IMR/ISR regs to mask/clear at init
- * @mod_no: TWL4030 module number (e.g., TWL4030_MODULE_GPIO)
- * @sih_ctrl: address of module SIH_CTRL register
- * @reg_cnt: number of IMR/ISR regs
- * @imrs: pointer to array of TWL module interrupt mask register indices
- * @isrs: pointer to array of TWL module interrupt status register indices
- *
- * Ties together TWL4030 modules and lists of IMR/ISR registers to mask/clear
- * during twl_init_irq().
- */
-struct twl4030_mod_iregs {
-	const u8 mod_no;
-	const u8 sih_ctrl;
-	const u8 reg_cnt;
-	const u8 *imrs;
-	const u8 *isrs;
-};
-
-/* TWL4030 INT module interrupt mask registers */
-static const u8 __initconst twl4030_int_imr_regs[] = {
-	TWL4030_INT_PWR_IMR1,
-	TWL4030_INT_PWR_IMR2,
-};
-
-/* TWL4030 INT module interrupt status registers */
-static const u8 __initconst twl4030_int_isr_regs[] = {
-	TWL4030_INT_PWR_ISR1,
-	TWL4030_INT_PWR_ISR2,
-};
-
-/* TWL4030 INTERRUPTS module interrupt mask registers */
-static const u8 __initconst twl4030_interrupts_imr_regs[] = {
-	TWL4030_INTERRUPTS_BCIIMR1A,
-	TWL4030_INTERRUPTS_BCIIMR1B,
-	TWL4030_INTERRUPTS_BCIIMR2A,
-	TWL4030_INTERRUPTS_BCIIMR2B,
-};
-
-/* TWL4030 INTERRUPTS module interrupt status registers */
-static const u8 __initconst twl4030_interrupts_isr_regs[] = {
-	TWL4030_INTERRUPTS_BCIISR1A,
-	TWL4030_INTERRUPTS_BCIISR1B,
-	TWL4030_INTERRUPTS_BCIISR2A,
-	TWL4030_INTERRUPTS_BCIISR2B,
-};
-
-/* TWL4030 MADC module interrupt mask registers */
-static const u8 __initconst twl4030_madc_imr_regs[] = {
-	TWL4030_MADC_IMR1,
-	TWL4030_MADC_IMR2,
-};
-
-/* TWL4030 MADC module interrupt status registers */
-static const u8 __initconst twl4030_madc_isr_regs[] = {
-	TWL4030_MADC_ISR1,
-	TWL4030_MADC_ISR2,
-};
-
-/* TWL4030 keypad module interrupt mask registers */
-static const u8 __initconst twl4030_keypad_imr_regs[] = {
-	TWL4030_KEYPAD_KEYP_IMR1,
-	TWL4030_KEYPAD_KEYP_IMR2,
-};
-
-/* TWL4030 keypad module interrupt status registers */
-static const u8 __initconst twl4030_keypad_isr_regs[] = {
-	TWL4030_KEYPAD_KEYP_ISR1,
-	TWL4030_KEYPAD_KEYP_ISR2,
-};
-
-/* TWL4030 GPIO module interrupt mask registers */
-static const u8 __initconst twl4030_gpio_imr_regs[] = {
-	REG_GPIO_IMR1A,
-	REG_GPIO_IMR1B,
-	REG_GPIO_IMR2A,
-	REG_GPIO_IMR2B,
-	REG_GPIO_IMR3A,
-	REG_GPIO_IMR3B,
-};
-
-/* TWL4030 GPIO module interrupt status registers */
-static const u8 __initconst twl4030_gpio_isr_regs[] = {
-	REG_GPIO_ISR1A,
-	REG_GPIO_ISR1B,
-	REG_GPIO_ISR2A,
-	REG_GPIO_ISR2B,
-	REG_GPIO_ISR3A,
-	REG_GPIO_ISR3B,
-};
-
-/* TWL4030 modules that have IMR/ISR registers that must be masked/cleared */
-static const struct twl4030_mod_iregs __initconst twl4030_mod_regs[] = {
-	{
-		.mod_no	  = TWL4030_MODULE_INT,
-		.sih_ctrl = TWL4030_INT_PWR_SIH_CTRL,
-		.reg_cnt  = ARRAY_SIZE(twl4030_int_imr_regs),
-		.imrs	  = twl4030_int_imr_regs,
-		.isrs	  = twl4030_int_isr_regs,
-	},
-	{
-		.mod_no	  = TWL4030_MODULE_INTERRUPTS,
-		.sih_ctrl = TWL4030_INTERRUPTS_BCISIHCTRL,
-		.reg_cnt  = ARRAY_SIZE(twl4030_interrupts_imr_regs),
-		.imrs	  = twl4030_interrupts_imr_regs,
-		.isrs	  = twl4030_interrupts_isr_regs,
-	},
-	{
-		.mod_no	  = TWL4030_MODULE_MADC,
-		.sih_ctrl = TWL4030_MADC_SIH_CTRL,
-		.reg_cnt  = ARRAY_SIZE(twl4030_madc_imr_regs),
-		.imrs	  = twl4030_madc_imr_regs,
-		.isrs	  = twl4030_madc_isr_regs,
-	},
-	{
-		.mod_no	  = TWL4030_MODULE_KEYPAD,
-		.sih_ctrl = TWL4030_KEYPAD_KEYP_SIH_CTRL,
-		.reg_cnt  = ARRAY_SIZE(twl4030_keypad_imr_regs),
-		.imrs	  = twl4030_keypad_imr_regs,
-		.isrs	  = twl4030_keypad_isr_regs,
-	},
-	{
-		.mod_no	  = TWL4030_MODULE_GPIO,
-		.sih_ctrl = REG_GPIO_SIH_CTRL,
-		.reg_cnt  = ARRAY_SIZE(twl4030_gpio_imr_regs),
-		.imrs	  = twl4030_gpio_imr_regs,
-		.isrs	  = twl4030_gpio_isr_regs,
-	},
-};
-
-/*----------------------------------------------------------------*/
-
 /* is driver active, bound to a chip? */
 static bool inuse;
 
@@ -367,33 +211,6 @@
 
 /*----------------------------------------------------------------------*/
 
-/*
- * TWL4030 doesn't have PIH mask, hence dummy function for mask
- * and unmask of the (eight) interrupts reported at that level ...
- * masking is only available from SIH (secondary) modules.
- */
-
-static void twl4030_i2c_ackirq(unsigned int irq)
-{
-}
-
-static void twl4030_i2c_disableint(unsigned int irq)
-{
-}
-
-static void twl4030_i2c_enableint(unsigned int irq)
-{
-}
-
-static struct irq_chip twl4030_irq_chip = {
-	.name	= "twl4030",
-	.ack	= twl4030_i2c_ackirq,
-	.mask	= twl4030_i2c_disableint,
-	.unmask	= twl4030_i2c_enableint,
-};
-
-/*----------------------------------------------------------------------*/
-
 /* Exported Functions */
 
 /**
@@ -535,108 +352,11 @@
 
 /*----------------------------------------------------------------------*/
 
-static unsigned twl4030_irq_base;
-
-static struct completion irq_event;
-
 /*
- * This thread processes interrupts reported by the Primary Interrupt Handler.
+ * NOTE:  We know the first 8 IRQs after pdata->base_irq are
+ * for the PIH, and the next are for the PWR_INT SIH, since
+ * that's how twl_init_irq() sets things up.
  */
-static int twl4030_irq_thread(void *data)
-{
-	long irq = (long)data;
-	irq_desc_t *desc = irq_desc + irq;
-	static unsigned i2c_errors;
-	const static unsigned max_i2c_errors = 100;
-
-	current->flags |= PF_NOFREEZE;
-
-	while (!kthread_should_stop()) {
-		int ret;
-		int module_irq;
-		u8 pih_isr;
-
-		/* Wait for IRQ, then read PIH irq status (also blocking) */
-		wait_for_completion_interruptible(&irq_event);
-
-		ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
-					  REG_PIH_ISR_P1);
-		if (ret) {
-			pr_warning("%s: I2C error %d reading PIH ISR\n",
-					DRIVER_NAME, ret);
-			if (++i2c_errors >= max_i2c_errors) {
-				printk(KERN_ERR "Maximum I2C error count"
-						" exceeded.  Terminating %s.\n",
-						__func__);
-				break;
-			}
-			complete(&irq_event);
-			continue;
-		}
-
-		/* these handlers deal with the relevant SIH irq status */
-		local_irq_disable();
-		for (module_irq = twl4030_irq_base;
-				pih_isr;
-				pih_isr >>= 1, module_irq++) {
-			if (pih_isr & 0x1) {
-				irq_desc_t *d = irq_desc + module_irq;
-
-				d->handle_irq(module_irq, d);
-			}
-		}
-		local_irq_enable();
-
-		desc->chip->unmask(irq);
-	}
-
-	return 0;
-}
-
-/*
- * do_twl4030_irq() is the desc->handle method for the twl4030 interrupt.
- * This is a chained interrupt, so there is no desc->action method for it.
- * Now we need to query the interrupt controller in the twl4030 to determine
- * which module is generating the interrupt request.  However, we can't do i2c
- * transactions in interrupt context, so we must defer that work to a kernel
- * thread.  All we do here is acknowledge and mask the interrupt and wakeup
- * the kernel thread.
- */
-static void do_twl4030_irq(unsigned int irq, irq_desc_t *desc)
-{
-	const unsigned int cpu = smp_processor_id();
-
-	/*
-	 * Earlier this was desc->triggered = 1;
-	 */
-	desc->status |= IRQ_LEVEL;
-
-	/*
-	 * Acknowledge, clear _AND_ disable the interrupt.
-	 */
-	desc->chip->ack(irq);
-
-	if (!desc->depth) {
-		kstat_cpu(cpu).irqs[irq]++;
-
-		complete(&irq_event);
-	}
-}
-
-static struct task_struct * __init start_twl4030_irq_thread(long irq)
-{
-	struct task_struct *thread;
-
-	init_completion(&irq_event);
-	thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq");
-	if (!thread)
-		pr_err("%s: could not create twl4030 irq %ld thread!\n",
-		       DRIVER_NAME, irq);
-
-	return thread;
-}
-
-/*----------------------------------------------------------------------*/
 
 static int add_children(struct twl4030_platform_data *pdata)
 {
@@ -668,7 +388,7 @@
 
 		if (status == 0) {
 			struct resource r = {
-				.start = TWL4030_PWRIRQ_CHG_PRES,
+				.start = pdata->irq_base + 8 + 1,
 				.flags = IORESOURCE_IRQ,
 			};
 
@@ -817,8 +537,7 @@
 		/* RTC module IRQ */
 		if (status == 0) {
 			struct resource	r = {
-				/* REVISIT don't hard-wire this stuff */
-				.start = TWL4030_PWRIRQ_RTC,
+				.start = pdata->irq_base + 8 + 3,
 				.flags = IORESOURCE_IRQ,
 			};
 
@@ -863,7 +582,7 @@
 
 		if (status == 0) {
 			struct resource r = {
-				.start = TWL4030_PWRIRQ_USB_PRES,
+				.start = pdata->irq_base + 8 + 2,
 				.flags = IORESOURCE_IRQ,
 			};
 
@@ -965,123 +684,17 @@
 
 /*----------------------------------------------------------------------*/
 
-/**
- * twl4030_i2c_clear_isr - clear TWL4030 SIH ISR regs via read + write
- * @mod_no: TWL4030 module number
- * @reg: register index to clear
- * @cor: value of the <module>_SIH_CTRL.COR bit (1 or 0)
- *
- * Either reads (cor == 1) or writes (cor == 0) to a TWL4030 interrupt
- * status register to ensure that any prior interrupts are cleared.
- * Returns the status from the I2C read operation.
- */
-static int __init twl4030_i2c_clear_isr(u8 mod_no, u8 reg, u8 cor)
-{
-	u8 tmp;
-
-	return (cor) ? twl4030_i2c_read_u8(mod_no, &tmp, reg) :
-		twl4030_i2c_write_u8(mod_no, 0xff, reg);
-}
-
-/**
- * twl4030_read_cor_bit - are TWL module ISRs cleared by reads or writes?
- * @mod_no: TWL4030 module number
- * @reg: register index to clear
- *
- * Returns 1 if the TWL4030 SIH interrupt status registers (ISRs) for
- * the specified TWL module are cleared by reads, or 0 if cleared by
- * writes.
- */
-static int twl4030_read_cor_bit(u8 mod_no, u8 reg)
-{
-	u8 tmp = 0;
-
-	WARN_ON(twl4030_i2c_read_u8(mod_no, &tmp, reg) < 0);
-
-	tmp &= TWL4030_SIH_CTRL_COR_MASK;
-	tmp >>= __ffs(TWL4030_SIH_CTRL_COR_MASK);
-
-	return tmp;
-}
-
-/**
- * twl4030_mask_clear_intrs - mask and clear all TWL4030 interrupts
- * @t: pointer to twl4030_mod_iregs array
- * @t_sz: ARRAY_SIZE(t) (starting at 1)
- *
- * Mask all TWL4030 interrupt mask registers (IMRs) and clear all
- * interrupt status registers (ISRs).  No return value, but will WARN if
- * any I2C operations fail.
- */
-static void __init twl4030_mask_clear_intrs(const struct twl4030_mod_iregs *t,
-					    const u8 t_sz)
-{
-	int i, j;
-
-	/*
-	 * N.B. - further efficiency is possible here.  Eight I2C
-	 * operations on BCI and GPIO modules are avoidable if I2C
-	 * burst read/write transactions were implemented.  Would
-	 * probably save about 1ms of boot time and a small amount of
-	 * power.
-	 */
-	for (i = 0; i < t_sz; i++) {
-		const struct twl4030_mod_iregs tmr = t[i];
-		int cor;
-
-		/* Are ISRs cleared by reads or writes? */
-		cor = twl4030_read_cor_bit(tmr.mod_no, tmr.sih_ctrl);
-
-		for (j = 0; j < tmr.reg_cnt; j++) {
-
-			/* Mask interrupts at the TWL4030 */
-			WARN_ON(twl4030_i2c_write_u8(tmr.mod_no, 0xff,
-						     tmr.imrs[j]) < 0);
-
-			/* Clear TWL4030 ISRs */
-			WARN_ON(twl4030_i2c_clear_isr(tmr.mod_no,
-						      tmr.isrs[j], cor) < 0);
-		}
-	}
-}
-
-
-static void twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
-{
-	int	i;
-
-	/*
-	 * Mask and clear all TWL4030 interrupts since initially we do
-	 * not have any TWL4030 module interrupt handlers present
-	 */
-	twl4030_mask_clear_intrs(twl4030_mod_regs,
-				 ARRAY_SIZE(twl4030_mod_regs));
-
-	twl4030_irq_base = irq_base;
-
-	/* install an irq handler for each of the PIH modules */
-	for (i = irq_base; i < irq_end; i++) {
-		set_irq_chip_and_handler(i, &twl4030_irq_chip,
-				handle_simple_irq);
-		activate_irq(i);
-	}
-
-	/* install an irq handler to demultiplex the TWL4030 interrupt */
-	set_irq_data(irq_num, start_twl4030_irq_thread(irq_num));
-	set_irq_chained_handler(irq_num, do_twl4030_irq);
-}
-
-/*----------------------------------------------------------------------*/
+int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
+int twl_exit_irq(void);
 
 static int twl4030_remove(struct i2c_client *client)
 {
 	unsigned i;
+	int status;
 
-	/* FIXME undo twl_init_irq() */
-	if (twl4030_irq_base) {
-		dev_err(&client->dev, "can't yet clean up IRQs?\n");
-		return -ENOSYS;
-	}
+	status = twl_exit_irq();
+	if (status < 0)
+		return status;
 
 	for (i = 0; i < TWL4030_NUM_SLAVES; i++) {
 		struct twl4030_client	*twl = &twl4030_modules[i];
@@ -1112,7 +725,7 @@
 		return -EIO;
 	}
 
-	if (inuse || twl4030_irq_base) {
+	if (inuse) {
 		dev_dbg(&client->dev, "driver is already in use\n");
 		return -EBUSY;
 	}
@@ -1146,9 +759,9 @@
 	if (client->irq
 			&& pdata->irq_base
 			&& pdata->irq_end > pdata->irq_base) {
-		twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end);
-		dev_info(&client->dev, "IRQ %d chains IRQs %d..%d\n",
-				client->irq, pdata->irq_base, pdata->irq_end - 1);
+		status = twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end);
+		if (status < 0)
+			goto fail;
 	}
 
 	status = add_children(pdata);
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
new file mode 100644
index 0000000..fae868a
--- /dev/null
+++ b/drivers/mfd/twl4030-irq.c
@@ -0,0 +1,743 @@
+/*
+ * twl4030-irq.c - TWL4030/TPS659x0 irq support
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * Modifications to defer interrupt handling to a kernel thread:
+ * Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * Based on tlv320aic23.c:
+ * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * Code cleanup and modifications to IRQ handler.
+ * by syed khasim <x0khasim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kthread.h>
+
+#include <linux/i2c/twl4030.h>
+
+
+/*
+ * TWL4030 IRQ handling has two stages in hardware, and thus in software.
+ * The Primary Interrupt Handler (PIH) stage exposes status bits saying
+ * which Secondary Interrupt Handler (SIH) stage is raising an interrupt.
+ * SIH modules are more traditional IRQ components, which support per-IRQ
+ * enable/disable and trigger controls; they do most of the work.
+ *
+ * These chips are designed to support IRQ handling from two different
+ * I2C masters.  Each has a dedicated IRQ line, and dedicated IRQ status
+ * and mask registers in the PIH and SIH modules.
+ *
+ * We set up IRQs starting at a platform-specified base, always starting
+ * with PIH and the SIH for PWR_INT and then usually adding GPIO:
+ *	base + 0  .. base + 7	PIH
+ *	base + 8  .. base + 15	SIH for PWR_INT
+ *	base + 16 .. base + 33	SIH for GPIO
+ */
+
+/* PIH register offsets */
+#define REG_PIH_ISR_P1			0x01
+#define REG_PIH_ISR_P2			0x02
+#define REG_PIH_SIR			0x03	/* for testing */
+
+
+/* Linux could (eventually) use either IRQ line */
+static int irq_line;
+
+struct sih {
+	char	name[8];
+	u8	module;			/* module id */
+	u8	control_offset;		/* for SIH_CTRL */
+	bool	set_cor;
+
+	u8	bits;			/* valid in isr/imr */
+	u8	bytes_ixr;		/* bytelen of ISR/IMR/SIR */
+
+	u8	edr_offset;
+	u8	bytes_edr;		/* bytelen of EDR */
+
+	/* SIR ignored -- set interrupt, for testing only */
+	struct irq_data {
+		u8	isr_offset;
+		u8	imr_offset;
+	} mask[2];
+	/* + 2 bytes padding */
+};
+
+#define SIH_INITIALIZER(modname, nbits) \
+	.module		= TWL4030_MODULE_ ## modname, \
+	.control_offset = TWL4030_ ## modname ## _SIH_CTRL, \
+	.bits		= nbits, \
+	.bytes_ixr	= DIV_ROUND_UP(nbits, 8), \
+	.edr_offset	= TWL4030_ ## modname ## _EDR, \
+	.bytes_edr	= DIV_ROUND_UP((2*(nbits)), 8), \
+	.mask = { { \
+		.isr_offset	= TWL4030_ ## modname ## _ISR1, \
+		.imr_offset	= TWL4030_ ## modname ## _IMR1, \
+	}, \
+	{ \
+		.isr_offset	= TWL4030_ ## modname ## _ISR2, \
+		.imr_offset	= TWL4030_ ## modname ## _IMR2, \
+	}, },
+
+/* register naming policies are inconsistent ... */
+#define TWL4030_INT_PWR_EDR		TWL4030_INT_PWR_EDR1
+#define TWL4030_MODULE_KEYPAD_KEYP	TWL4030_MODULE_KEYPAD
+#define TWL4030_MODULE_INT_PWR		TWL4030_MODULE_INT
+
+
+/* Order in this table matches order in PIH_ISR.  That is,
+ * BIT(n) in PIH_ISR is sih_modules[n].
+ */
+static const struct sih sih_modules[6] = {
+	[0] = {
+		.name		= "gpio",
+		.module		= TWL4030_MODULE_GPIO,
+		.control_offset	= REG_GPIO_SIH_CTRL,
+		.set_cor	= true,
+		.bits		= TWL4030_GPIO_MAX,
+		.bytes_ixr	= 3,
+		/* Note: *all* of these IRQs default to no-trigger */
+		.edr_offset	= REG_GPIO_EDR1,
+		.bytes_edr	= 5,
+		.mask = { {
+			.isr_offset	= REG_GPIO_ISR1A,
+			.imr_offset	= REG_GPIO_IMR1A,
+		}, {
+			.isr_offset	= REG_GPIO_ISR1B,
+			.imr_offset	= REG_GPIO_IMR1B,
+		}, },
+	},
+	[1] = {
+		.name		= "keypad",
+		.set_cor	= true,
+		SIH_INITIALIZER(KEYPAD_KEYP, 4)
+	},
+	[2] = {
+		.name		= "bci",
+		.module		= TWL4030_MODULE_INTERRUPTS,
+		.control_offset	= TWL4030_INTERRUPTS_BCISIHCTRL,
+		.bits		= 12,
+		.bytes_ixr	= 2,
+		.edr_offset	= TWL4030_INTERRUPTS_BCIEDR1,
+		/* Note: most of these IRQs default to no-trigger */
+		.bytes_edr	= 3,
+		.mask = { {
+			.isr_offset	= TWL4030_INTERRUPTS_BCIISR1A,
+			.imr_offset	= TWL4030_INTERRUPTS_BCIIMR1A,
+		}, {
+			.isr_offset	= TWL4030_INTERRUPTS_BCIISR1B,
+			.imr_offset	= TWL4030_INTERRUPTS_BCIIMR1B,
+		}, },
+	},
+	[3] = {
+		.name		= "madc",
+		SIH_INITIALIZER(MADC, 4)
+	},
+	[4] = {
+		/* USB doesn't use the same SIH organization */
+		.name		= "usb",
+	},
+	[5] = {
+		.name		= "power",
+		.set_cor	= true,
+		SIH_INITIALIZER(INT_PWR, 8)
+	},
+		/* there are no SIH modules #6 or #7 ... */
+};
+
+#undef TWL4030_MODULE_KEYPAD_KEYP
+#undef TWL4030_MODULE_INT_PWR
+#undef TWL4030_INT_PWR_EDR
+
+/*----------------------------------------------------------------------*/
+
+static unsigned twl4030_irq_base;
+
+static struct completion irq_event;
+
+/*
+ * This thread processes interrupts reported by the Primary Interrupt Handler.
+ */
+static int twl4030_irq_thread(void *data)
+{
+	long irq = (long)data;
+	irq_desc_t *desc = irq_desc + irq;
+	static unsigned i2c_errors;
+	const static unsigned max_i2c_errors = 100;
+
+	current->flags |= PF_NOFREEZE;
+
+	while (!kthread_should_stop()) {
+		int ret;
+		int module_irq;
+		u8 pih_isr;
+
+		/* Wait for IRQ, then read PIH irq status (also blocking) */
+		wait_for_completion_interruptible(&irq_event);
+
+		ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
+					  REG_PIH_ISR_P1);
+		if (ret) {
+			pr_warning("twl4030: I2C error %d reading PIH ISR\n",
+					ret);
+			if (++i2c_errors >= max_i2c_errors) {
+				printk(KERN_ERR "Maximum I2C error count"
+						" exceeded.  Terminating %s.\n",
+						__func__);
+				break;
+			}
+			complete(&irq_event);
+			continue;
+		}
+
+		/* these handlers deal with the relevant SIH irq status */
+		local_irq_disable();
+		for (module_irq = twl4030_irq_base;
+				pih_isr;
+				pih_isr >>= 1, module_irq++) {
+			if (pih_isr & 0x1) {
+				irq_desc_t *d = irq_desc + module_irq;
+
+				/* These can't be masked ... always warn
+				 * if we get any surprises.
+				 */
+				if (d->status & IRQ_DISABLED)
+					note_interrupt(module_irq, d,
+							IRQ_NONE);
+				else
+					d->handle_irq(module_irq, d);
+			}
+		}
+		local_irq_enable();
+
+		desc->chip->unmask(irq);
+	}
+
+	return 0;
+}
+
+/*
+ * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt.
+ * This is a chained interrupt, so there is no desc->action method for it.
+ * Now we need to query the interrupt controller in the twl4030 to determine
+ * which module is generating the interrupt request.  However, we can't do i2c
+ * transactions in interrupt context, so we must defer that work to a kernel
+ * thread.  All we do here is acknowledge and mask the interrupt and wakeup
+ * the kernel thread.
+ */
+static void handle_twl4030_pih(unsigned int irq, irq_desc_t *desc)
+{
+	/* Acknowledge, clear *AND* mask the interrupt... */
+	desc->chip->ack(irq);
+	complete(&irq_event);
+}
+
+static struct task_struct *start_twl4030_irq_thread(long irq)
+{
+	struct task_struct *thread;
+
+	init_completion(&irq_event);
+	thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq");
+	if (!thread)
+		pr_err("twl4030: could not create irq %ld thread!\n", irq);
+
+	return thread;
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * twl4030_init_sih_modules() ... start from a known state where no
+ * IRQs will be coming in, and where we can quickly enable them then
+ * handle them as they arrive.  Mask all IRQs: maybe init SIH_CTRL.
+ *
+ * NOTE:  we don't touch EDR registers here; they stay with hardware
+ * defaults or whatever the last value was.  Note that when both EDR
+ * bits for an IRQ are clear, that's as if its IMR bit is set...
+ */
+static int twl4030_init_sih_modules(unsigned line)
+{
+	const struct sih *sih;
+	u8 buf[4];
+	int i;
+	int status;
+
+	/* line 0 == int1_n signal; line 1 == int2_n signal */
+	if (line > 1)
+		return -EINVAL;
+
+	irq_line = line;
+
+	/* disable all interrupts on our line */
+	memset(buf, 0xff, sizeof buf);
+	sih = sih_modules;
+	for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
+
+		/* skip USB -- it's funky */
+		if (!sih->bytes_ixr)
+			continue;
+
+		status = twl4030_i2c_write(sih->module, buf,
+				sih->mask[line].imr_offset, sih->bytes_ixr);
+		if (status < 0)
+			pr_err("twl4030: err %d initializing %s %s\n",
+					status, sih->name, "IMR");
+
+		/* Maybe disable "exclusive" mode; buffer second pending irq;
+		 * set Clear-On-Read (COR) bit.
+		 *
+		 * NOTE that sometimes COR polarity is documented as being
+		 * inverted:  for MADC and BCI, COR=1 means "clear on write".
+		 * And for PWR_INT it's not documented...
+		 */
+		if (sih->set_cor) {
+			status = twl4030_i2c_write_u8(sih->module,
+					TWL4030_SIH_CTRL_COR_MASK,
+					sih->control_offset);
+			if (status < 0)
+				pr_err("twl4030: err %d initializing %s %s\n",
+						status, sih->name, "SIH_CTRL");
+		}
+	}
+
+	sih = sih_modules;
+	for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
+		u8 rxbuf[4];
+		int j;
+
+		/* skip USB */
+		if (!sih->bytes_ixr)
+			continue;
+
+		/* Clear pending interrupt status.  Either the read was
+		 * enough, or we need to write those bits.  Repeat, in
+		 * case an IRQ is pending (PENDDIS=0) ... that's not
+		 * uncommon with PWR_INT.PWRON.
+		 */
+		for (j = 0; j < 2; j++) {
+			status = twl4030_i2c_read(sih->module, rxbuf,
+				sih->mask[line].isr_offset, sih->bytes_ixr);
+			if (status < 0)
+				pr_err("twl4030: err %d initializing %s %s\n",
+					status, sih->name, "ISR");
+
+			if (!sih->set_cor)
+				status = twl4030_i2c_write(sih->module, buf,
+					sih->mask[line].isr_offset,
+					sih->bytes_ixr);
+			/* else COR=1 means read sufficed.
+			 * (for most SIH modules...)
+			 */
+		}
+	}
+
+	return 0;
+}
+
+static inline void activate_irq(int irq)
+{
+#ifdef CONFIG_ARM
+	/* ARM requires an extra step to clear IRQ_NOREQUEST, which it
+	 * sets on behalf of every irq_chip.  Also sets IRQ_NOPROBE.
+	 */
+	set_irq_flags(irq, IRQF_VALID);
+#else
+	/* same effect on other architectures */
+	set_irq_noprobe(irq);
+#endif
+}
+
+/*----------------------------------------------------------------------*/
+
+static DEFINE_SPINLOCK(sih_agent_lock);
+
+static struct workqueue_struct *wq;
+
+struct sih_agent {
+	int			irq_base;
+	const struct sih	*sih;
+
+	u32			imr;
+	bool			imr_change_pending;
+	struct work_struct	mask_work;
+
+	u32			edge_change;
+	struct work_struct	edge_work;
+};
+
+static void twl4030_sih_do_mask(struct work_struct *work)
+{
+	struct sih_agent	*agent;
+	const struct sih	*sih;
+	union {
+		u8	bytes[4];
+		u32	word;
+	}			imr;
+	int			status;
+
+	agent = container_of(work, struct sih_agent, mask_work);
+
+	/* see what work we have */
+	spin_lock_irq(&sih_agent_lock);
+	if (agent->imr_change_pending) {
+		sih = agent->sih;
+		/* byte[0] gets overwritten as we write ... */
+		imr.word = cpu_to_le32(agent->imr << 8);
+		agent->imr_change_pending = false;
+	} else
+		sih = NULL;
+	spin_unlock_irq(&sih_agent_lock);
+	if (!sih)
+		return;
+
+	/* write the whole mask ... simpler than subsetting it */
+	status = twl4030_i2c_write(sih->module, imr.bytes,
+			sih->mask[irq_line].imr_offset, sih->bytes_ixr);
+	if (status)
+		pr_err("twl4030: %s, %s --> %d\n", __func__,
+				"write", status);
+}
+
+static void twl4030_sih_do_edge(struct work_struct *work)
+{
+	struct sih_agent	*agent;
+	const struct sih	*sih;
+	u8			bytes[6];
+	u32			edge_change;
+	int			status;
+
+	agent = container_of(work, struct sih_agent, edge_work);
+
+	/* see what work we have */
+	spin_lock_irq(&sih_agent_lock);
+	edge_change = agent->edge_change;
+	agent->edge_change = 0;;
+	sih = edge_change ? agent->sih : NULL;
+	spin_unlock_irq(&sih_agent_lock);
+	if (!sih)
+		return;
+
+	/* Read, reserving first byte for write scratch.  Yes, this
+	 * could be cached for some speedup ... but be careful about
+	 * any processor on the other IRQ line, EDR registers are
+	 * shared.
+	 */
+	status = twl4030_i2c_read(sih->module, bytes + 1,
+			sih->edr_offset, sih->bytes_edr);
+	if (status) {
+		pr_err("twl4030: %s, %s --> %d\n", __func__,
+				"read", status);
+		return;
+	}
+
+	/* Modify only the bits we know must change */
+	while (edge_change) {
+		int		i = fls(edge_change) - 1;
+		struct irq_desc	*d = irq_desc + i + agent->irq_base;
+		int		byte = 1 + (i >> 2);
+		int		off = (i & 0x3) * 2;
+
+		bytes[byte] &= ~(0x03 << off);
+
+		spin_lock_irq(&d->lock);
+		if (d->status & IRQ_TYPE_EDGE_RISING)
+			bytes[byte] |= BIT(off + 1);
+		if (d->status & IRQ_TYPE_EDGE_FALLING)
+			bytes[byte] |= BIT(off + 0);
+		spin_unlock_irq(&d->lock);
+
+		edge_change &= ~BIT(i);
+	}
+
+	/* Write */
+	status = twl4030_i2c_write(sih->module, bytes,
+			sih->edr_offset, sih->bytes_edr);
+	if (status)
+		pr_err("twl4030: %s, %s --> %d\n", __func__,
+				"write", status);
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * All irq_chip methods get issued from code holding irq_desc[irq].lock,
+ * which can't perform the underlying I2C operations (because they sleep).
+ * So we must hand them off to a thread (workqueue) and cope with asynch
+ * completion, potentially including some re-ordering, of these requests.
+ */
+
+static void twl4030_sih_mask(unsigned irq)
+{
+	struct sih_agent *sih = get_irq_chip_data(irq);
+	unsigned long flags;
+
+	spin_lock_irqsave(&sih_agent_lock, flags);
+	sih->imr |= BIT(irq - sih->irq_base);
+	sih->imr_change_pending = true;
+	queue_work(wq, &sih->mask_work);
+	spin_unlock_irqrestore(&sih_agent_lock, flags);
+}
+
+static void twl4030_sih_unmask(unsigned irq)
+{
+	struct sih_agent *sih = get_irq_chip_data(irq);
+	unsigned long flags;
+
+	spin_lock_irqsave(&sih_agent_lock, flags);
+	sih->imr &= ~BIT(irq - sih->irq_base);
+	sih->imr_change_pending = true;
+	queue_work(wq, &sih->mask_work);
+	spin_unlock_irqrestore(&sih_agent_lock, flags);
+}
+
+static int twl4030_sih_set_type(unsigned irq, unsigned trigger)
+{
+	struct sih_agent *sih = get_irq_chip_data(irq);
+	struct irq_desc *desc = irq_desc + irq;
+	unsigned long flags;
+
+	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		return -EINVAL;
+
+	spin_lock_irqsave(&sih_agent_lock, flags);
+	if ((desc->status & IRQ_TYPE_SENSE_MASK) != trigger) {
+		desc->status &= ~IRQ_TYPE_SENSE_MASK;
+		desc->status |= trigger;
+		sih->edge_change |= BIT(irq - sih->irq_base);
+		queue_work(wq, &sih->edge_work);
+	}
+	spin_unlock_irqrestore(&sih_agent_lock, flags);
+	return 0;
+}
+
+static struct irq_chip twl4030_sih_irq_chip = {
+	.name		= "twl4030",
+	.mask		= twl4030_sih_mask,
+	.unmask		= twl4030_sih_unmask,
+	.set_type	= twl4030_sih_set_type,
+};
+
+/*----------------------------------------------------------------------*/
+
+static inline int sih_read_isr(const struct sih *sih)
+{
+	int status;
+	union {
+		u8 bytes[4];
+		u32 word;
+	} isr;
+
+	/* FIXME need retry-on-error ... */
+
+	isr.word = 0;
+	status = twl4030_i2c_read(sih->module, isr.bytes,
+			sih->mask[irq_line].isr_offset, sih->bytes_ixr);
+
+	return (status < 0) ? status : le32_to_cpu(isr.word);
+}
+
+/*
+ * Generic handler for SIH interrupts ... we "know" this is called
+ * in task context, with IRQs enabled.
+ */
+static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc)
+{
+	struct sih_agent *agent = get_irq_data(irq);
+	const struct sih *sih = agent->sih;
+	int isr;
+
+	/* reading ISR acks the IRQs, using clear-on-read mode */
+	local_irq_enable();
+	isr = sih_read_isr(sih);
+	local_irq_disable();
+
+	if (isr < 0) {
+		pr_err("twl4030: %s SIH, read ISR error %d\n",
+			sih->name, isr);
+		/* REVISIT:  recover; eventually mask it all, etc */
+		return;
+	}
+
+	while (isr) {
+		irq = fls(isr);
+		irq--;
+		isr &= ~BIT(irq);
+
+		if (irq < sih->bits)
+			generic_handle_irq(agent->irq_base + irq);
+		else
+			pr_err("twl4030: %s SIH, invalid ISR bit %d\n",
+				sih->name, irq);
+	}
+}
+
+static unsigned twl4030_irq_next;
+
+/* returns the first IRQ used by this SIH bank,
+ * or negative errno
+ */
+int twl4030_sih_setup(int module)
+{
+	int			sih_mod;
+	const struct sih	*sih = NULL;
+	struct sih_agent	*agent;
+	int			i, irq;
+	int			status = -EINVAL;
+	unsigned		irq_base = twl4030_irq_next;
+
+	/* only support modules with standard clear-on-read for now */
+	for (sih_mod = 0, sih = sih_modules;
+			sih_mod < ARRAY_SIZE(sih_modules);
+			sih_mod++, sih++) {
+		if (sih->module == module && sih->set_cor) {
+			if (!WARN((irq_base + sih->bits) > NR_IRQS,
+					"irq %d for %s too big\n",
+					irq_base + sih->bits,
+					sih->name))
+				status = 0;
+			break;
+		}
+	}
+	if (status < 0)
+		return status;
+
+	agent = kzalloc(sizeof *agent, GFP_KERNEL);
+	if (!agent)
+		return -ENOMEM;
+
+	status = 0;
+
+	agent->irq_base = irq_base;
+	agent->sih = sih;
+	agent->imr = ~0;
+	INIT_WORK(&agent->mask_work, twl4030_sih_do_mask);
+	INIT_WORK(&agent->edge_work, twl4030_sih_do_edge);
+
+	for (i = 0; i < sih->bits; i++) {
+		irq = irq_base + i;
+
+		set_irq_chip_and_handler(irq, &twl4030_sih_irq_chip,
+				handle_edge_irq);
+		set_irq_chip_data(irq, agent);
+		activate_irq(irq);
+	}
+
+	status = irq_base;
+	twl4030_irq_next += i;
+
+	/* replace generic PIH handler (handle_simple_irq) */
+	irq = sih_mod + twl4030_irq_base;
+	set_irq_data(irq, agent);
+	set_irq_chained_handler(irq, handle_twl4030_sih);
+
+	pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name,
+			irq, irq_base, twl4030_irq_next - 1);
+
+	return status;
+}
+
+/* FIXME need a call to reverse twl4030_sih_setup() ... */
+
+
+/*----------------------------------------------------------------------*/
+
+/* FIXME pass in which interrupt line we'll use ... */
+#define twl_irq_line	0
+
+int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
+{
+	static struct irq_chip	twl4030_irq_chip;
+
+	int			status;
+	int			i;
+	struct task_struct	*task;
+
+	/*
+	 * Mask and clear all TWL4030 interrupts since initially we do
+	 * not have any TWL4030 module interrupt handlers present
+	 */
+	status = twl4030_init_sih_modules(twl_irq_line);
+	if (status < 0)
+		return status;
+
+	wq = create_singlethread_workqueue("twl4030-irqchip");
+	if (!wq) {
+		pr_err("twl4030: workqueue FAIL\n");
+		return -ESRCH;
+	}
+
+	twl4030_irq_base = irq_base;
+
+	/* install an irq handler for each of the SIH modules;
+	 * clone dummy irq_chip since PIH can't *do* anything
+	 */
+	twl4030_irq_chip = dummy_irq_chip;
+	twl4030_irq_chip.name = "twl4030";
+
+	twl4030_sih_irq_chip.ack = dummy_irq_chip.ack;
+
+	for (i = irq_base; i < irq_end; i++) {
+		set_irq_chip_and_handler(i, &twl4030_irq_chip,
+				handle_simple_irq);
+		activate_irq(i);
+	}
+	twl4030_irq_next = i;
+	pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", "PIH",
+			irq_num, irq_base, twl4030_irq_next - 1);
+
+	/* ... and the PWR_INT module ... */
+	status = twl4030_sih_setup(TWL4030_MODULE_INT);
+	if (status < 0) {
+		pr_err("twl4030: sih_setup PWR INT --> %d\n", status);
+		goto fail;
+	}
+
+	/* install an irq handler to demultiplex the TWL4030 interrupt */
+	task = start_twl4030_irq_thread(irq_num);
+	if (!task) {
+		pr_err("twl4030: irq thread FAIL\n");
+		status = -ESRCH;
+		goto fail;
+	}
+
+	set_irq_data(irq_num, task);
+	set_irq_chained_handler(irq_num, handle_twl4030_pih);
+
+	return status;
+
+fail:
+	for (i = irq_base; i < irq_end; i++)
+		set_irq_chip_and_handler(i, NULL, NULL);
+	destroy_workqueue(wq);
+	wq = NULL;
+	return status;
+}
+
+int twl_exit_irq(void)
+{
+	/* FIXME undo twl_init_irq() */
+	if (twl4030_irq_base) {
+		pr_err("twl4030: can't yet clean up IRQs?\n");
+		return -ENOSYS;
+	}
+	return 0;
+}
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index bf87f67..0d47fb9 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -183,6 +183,9 @@
 			(wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable)
 			| src[i - reg];
 
+		/* Don't store volatile bits */
+		wm8350->reg_cache[i] &= ~wm8350_reg_io_map[i].vol;
+
 		src[i - reg] = cpu_to_be16(src[i - reg]);
 	}
 
@@ -1120,6 +1123,7 @@
 			}
 			value = be16_to_cpu(value);
 			value &= wm8350_reg_io_map[i].readable;
+			value &= ~wm8350_reg_io_map[i].vol;
 			wm8350->reg_cache[i] = value;
 		} else
 			wm8350->reg_cache[i] = reg_map[i];
@@ -1128,7 +1132,6 @@
 out:
 	return ret;
 }
-EXPORT_SYMBOL_GPL(wm8350_create_cache);
 
 /*
  * Register a client device.  This is non-fatal since there is no need to
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index efd3aa0..9494400 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -145,6 +145,7 @@
 	depends on NEW_LEDS
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on SERIO_I8042
+	depends on RFKILL
 	select ACPI_WMI
 	---help---
 	  This is a driver for newer Acer (and Wistron) laptops. It adds
@@ -245,6 +246,17 @@
 
 	  If you have an MSI S270 laptop, say Y or M here.
 
+config PANASONIC_LAPTOP
+	tristate "Panasonic Laptop Extras"
+	depends on X86 && INPUT && ACPI
+        depends on BACKLIGHT_CLASS_DEVICE
+	---help---
+	  This driver adds support for access to backlight control and hotkeys
+	  on Panasonic Let's Note laptops.
+
+	  If you have a Panasonic Let's note laptop (such as the R1(N variant),
+	  R2, R3, R5, T2, W2 and Y2 series), say Y.
+
 config COMPAL_LAPTOP
 	tristate "Compal Laptop Extras"
 	depends on X86
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index c6c13f6..909e246 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -23,6 +23,7 @@
 obj-$(CONFIG_SONY_LAPTOP)	+= sony-laptop.o
 obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
 obj-$(CONFIG_FUJITSU_LAPTOP)	+= fujitsu-laptop.o
+obj-$(CONFIG_PANASONIC_LAPTOP)	+= panasonic-laptop.o
 obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
 obj-$(CONFIG_INTEL_MENLOW)	+= intel_menlow.o
 obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c
index d8b0d32..0532a2d 100644
--- a/drivers/misc/acer-wmi.c
+++ b/drivers/misc/acer-wmi.c
@@ -33,6 +33,8 @@
 #include <linux/platform_device.h>
 #include <linux/acpi.h>
 #include <linux/i8042.h>
+#include <linux/rfkill.h>
+#include <linux/workqueue.h>
 #include <linux/debugfs.h>
 
 #include <acpi/acpi_drivers.h>
@@ -123,21 +125,15 @@
 
 static int max_brightness = 0xF;
 
-static int wireless = -1;
-static int bluetooth = -1;
 static int mailled = -1;
 static int brightness = -1;
 static int threeg = -1;
 static int force_series;
 
 module_param(mailled, int, 0444);
-module_param(wireless, int, 0444);
-module_param(bluetooth, int, 0444);
 module_param(brightness, int, 0444);
 module_param(threeg, int, 0444);
 module_param(force_series, int, 0444);
-MODULE_PARM_DESC(wireless, "Set initial state of Wireless hardware");
-MODULE_PARM_DESC(bluetooth, "Set initial state of Bluetooth hardware");
 MODULE_PARM_DESC(mailled, "Set initial state of Mail LED");
 MODULE_PARM_DESC(brightness, "Set initial LCD backlight brightness");
 MODULE_PARM_DESC(threeg, "Set initial state of 3G hardware");
@@ -145,8 +141,6 @@
 
 struct acer_data {
 	int mailled;
-	int wireless;
-	int bluetooth;
 	int threeg;
 	int brightness;
 };
@@ -157,6 +151,9 @@
 	u32 wmid_devices;
 };
 
+static struct rfkill *wireless_rfkill;
+static struct rfkill *bluetooth_rfkill;
+
 /* Each low-level interface must define at least some of the following */
 struct wmi_interface {
 	/* The WMI device type */
@@ -476,7 +473,7 @@
 		}
 		break;
 	default:
-		return AE_BAD_ADDRESS;
+		return AE_ERROR;
 	}
 	return AE_OK;
 }
@@ -514,7 +511,7 @@
 			break;
 		}
 	default:
-		return AE_BAD_ADDRESS;
+		return AE_ERROR;
 	}
 
 	/* Actually do the set */
@@ -689,7 +686,7 @@
 			return 0;
 		}
 	default:
-		return AE_BAD_ADDRESS;
+		return AE_ERROR;
 	}
 	status = WMI_execute_u32(method_id, 0, &result);
 
@@ -735,7 +732,7 @@
 		}
 		break;
 	default:
-		return AE_BAD_ADDRESS;
+		return AE_ERROR;
 	}
 	return WMI_execute_u32(method_id, (u32)value, NULL);
 }
@@ -785,7 +782,7 @@
 
 static acpi_status get_u32(u32 *value, u32 cap)
 {
-	acpi_status status = AE_BAD_ADDRESS;
+	acpi_status status = AE_ERROR;
 
 	switch (interface->type) {
 	case ACER_AMW0:
@@ -846,8 +843,6 @@
 	 * capability isn't available on the given interface
 	 */
 	set_u32(mailled, ACER_CAP_MAILLED);
-	set_u32(wireless, ACER_CAP_WIRELESS);
-	set_u32(bluetooth, ACER_CAP_BLUETOOTH);
 	set_u32(threeg, ACER_CAP_THREEG);
 	set_u32(brightness, ACER_CAP_BRIGHTNESS);
 }
@@ -933,40 +928,135 @@
 }
 
 /*
- * Read/ write bool sysfs macro
+ * Rfkill devices
  */
-#define show_set_bool(value, cap) \
-static ssize_t \
-show_bool_##value(struct device *dev, struct device_attribute *attr, \
-	char *buf) \
-{ \
-	u32 result; \
-	acpi_status status = get_u32(&result, cap); \
-	if (ACPI_SUCCESS(status)) \
-		return sprintf(buf, "%u\n", result); \
-	return sprintf(buf, "Read error\n"); \
-} \
-\
-static ssize_t \
-set_bool_##value(struct device *dev, struct device_attribute *attr, \
-	const char *buf, size_t count) \
-{ \
-	u32 tmp = simple_strtoul(buf, NULL, 10); \
-	acpi_status status = set_u32(tmp, cap); \
-		if (ACPI_FAILURE(status)) \
-			return -EINVAL; \
-	return count; \
-} \
-static DEVICE_ATTR(value, S_IWUGO | S_IRUGO | S_IWUSR, \
-	show_bool_##value, set_bool_##value);
+static void acer_rfkill_update(struct work_struct *ignored);
+static DECLARE_DELAYED_WORK(acer_rfkill_work, acer_rfkill_update);
+static void acer_rfkill_update(struct work_struct *ignored)
+{
+	u32 state;
+	acpi_status status;
 
-show_set_bool(wireless, ACER_CAP_WIRELESS);
-show_set_bool(bluetooth, ACER_CAP_BLUETOOTH);
-show_set_bool(threeg, ACER_CAP_THREEG);
+	status = get_u32(&state, ACER_CAP_WIRELESS);
+	if (ACPI_SUCCESS(status))
+		rfkill_force_state(wireless_rfkill, state ?
+			RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED);
+
+	if (has_cap(ACER_CAP_BLUETOOTH)) {
+		status = get_u32(&state, ACER_CAP_BLUETOOTH);
+		if (ACPI_SUCCESS(status))
+			rfkill_force_state(bluetooth_rfkill, state ?
+				RFKILL_STATE_UNBLOCKED :
+				RFKILL_STATE_SOFT_BLOCKED);
+	}
+
+	schedule_delayed_work(&acer_rfkill_work, round_jiffies_relative(HZ));
+}
+
+static int acer_rfkill_set(void *data, enum rfkill_state state)
+{
+	acpi_status status;
+	u32 *cap = data;
+	status = set_u32((u32) (state == RFKILL_STATE_UNBLOCKED), *cap);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+	return 0;
+}
+
+static struct rfkill * acer_rfkill_register(struct device *dev,
+enum rfkill_type type, char *name, u32 cap)
+{
+	int err;
+	u32 state;
+	u32 *data;
+	struct rfkill *rfkill_dev;
+
+	rfkill_dev = rfkill_allocate(dev, type);
+	if (!rfkill_dev)
+		return ERR_PTR(-ENOMEM);
+	rfkill_dev->name = name;
+	get_u32(&state, cap);
+	rfkill_dev->state = state ? RFKILL_STATE_UNBLOCKED :
+		RFKILL_STATE_SOFT_BLOCKED;
+	data = kzalloc(sizeof(u32), GFP_KERNEL);
+	if (!data) {
+		rfkill_free(rfkill_dev);
+		return ERR_PTR(-ENOMEM);
+	}
+	*data = cap;
+	rfkill_dev->data = data;
+	rfkill_dev->toggle_radio = acer_rfkill_set;
+	rfkill_dev->user_claim_unsupported = 1;
+
+	err = rfkill_register(rfkill_dev);
+	if (err) {
+		kfree(rfkill_dev->data);
+		rfkill_free(rfkill_dev);
+		return ERR_PTR(err);
+	}
+	return rfkill_dev;
+}
+
+static int acer_rfkill_init(struct device *dev)
+{
+	wireless_rfkill = acer_rfkill_register(dev, RFKILL_TYPE_WLAN,
+		"acer-wireless", ACER_CAP_WIRELESS);
+	if (IS_ERR(wireless_rfkill))
+		return PTR_ERR(wireless_rfkill);
+
+	if (has_cap(ACER_CAP_BLUETOOTH)) {
+		bluetooth_rfkill = acer_rfkill_register(dev,
+			RFKILL_TYPE_BLUETOOTH, "acer-bluetooth",
+			ACER_CAP_BLUETOOTH);
+		if (IS_ERR(bluetooth_rfkill)) {
+			kfree(wireless_rfkill->data);
+			rfkill_unregister(wireless_rfkill);
+			return PTR_ERR(bluetooth_rfkill);
+		}
+	}
+
+	schedule_delayed_work(&acer_rfkill_work, round_jiffies_relative(HZ));
+
+	return 0;
+}
+
+static void acer_rfkill_exit(void)
+{
+	cancel_delayed_work_sync(&acer_rfkill_work);
+	kfree(wireless_rfkill->data);
+	rfkill_unregister(wireless_rfkill);
+	if (has_cap(ACER_CAP_BLUETOOTH)) {
+		kfree(wireless_rfkill->data);
+		rfkill_unregister(bluetooth_rfkill);
+	}
+	return;
+}
 
 /*
- * Read interface sysfs macro
+ * sysfs interface
  */
+static ssize_t show_bool_threeg(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	u32 result; \
+	acpi_status status = get_u32(&result, ACER_CAP_THREEG);
+	if (ACPI_SUCCESS(status))
+		return sprintf(buf, "%u\n", result);
+	return sprintf(buf, "Read error\n");
+}
+
+static ssize_t set_bool_threeg(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	u32 tmp = simple_strtoul(buf, NULL, 10);
+	acpi_status status = set_u32(tmp, ACER_CAP_THREEG);
+		if (ACPI_FAILURE(status))
+			return -EINVAL;
+	return count;
+}
+static DEVICE_ATTR(threeg, S_IWUGO | S_IRUGO | S_IWUSR, show_bool_threeg,
+	set_bool_threeg);
+
 static ssize_t show_interface(struct device *dev, struct device_attribute *attr,
 	char *buf)
 {
@@ -1026,7 +1116,9 @@
 			goto error_brightness;
 	}
 
-	return 0;
+	err = acer_rfkill_init(&device->dev);
+
+	return err;
 
 error_brightness:
 	acer_led_exit();
@@ -1040,6 +1132,8 @@
 		acer_led_exit();
 	if (has_cap(ACER_CAP_BRIGHTNESS))
 		acer_backlight_exit();
+
+	acer_rfkill_exit();
 	return 0;
 }
 
@@ -1052,16 +1146,6 @@
 	if (!data)
 		return -ENOMEM;
 
-	if (has_cap(ACER_CAP_WIRELESS)) {
-		get_u32(&value, ACER_CAP_WIRELESS);
-		data->wireless = value;
-	}
-
-	if (has_cap(ACER_CAP_BLUETOOTH)) {
-		get_u32(&value, ACER_CAP_BLUETOOTH);
-		data->bluetooth = value;
-	}
-
 	if (has_cap(ACER_CAP_MAILLED)) {
 		get_u32(&value, ACER_CAP_MAILLED);
 		data->mailled = value;
@@ -1082,15 +1166,6 @@
 	if (!data)
 		return -ENOMEM;
 
-	if (has_cap(ACER_CAP_WIRELESS))
-		set_u32(data->wireless, ACER_CAP_WIRELESS);
-
-	if (has_cap(ACER_CAP_BLUETOOTH))
-		set_u32(data->bluetooth, ACER_CAP_BLUETOOTH);
-
-	if (has_cap(ACER_CAP_THREEG))
-		set_u32(data->threeg, ACER_CAP_THREEG);
-
 	if (has_cap(ACER_CAP_MAILLED))
 		set_u32(data->mailled, ACER_CAP_MAILLED);
 
@@ -1115,12 +1190,6 @@
 
 static int remove_sysfs(struct platform_device *device)
 {
-	if (has_cap(ACER_CAP_WIRELESS))
-		device_remove_file(&device->dev, &dev_attr_wireless);
-
-	if (has_cap(ACER_CAP_BLUETOOTH))
-		device_remove_file(&device->dev, &dev_attr_bluetooth);
-
 	if (has_cap(ACER_CAP_THREEG))
 		device_remove_file(&device->dev, &dev_attr_threeg);
 
@@ -1133,20 +1202,6 @@
 {
 	int retval = -ENOMEM;
 
-	if (has_cap(ACER_CAP_WIRELESS)) {
-		retval = device_create_file(&acer_platform_device->dev,
-			&dev_attr_wireless);
-		if (retval)
-			goto error_sysfs;
-	}
-
-	if (has_cap(ACER_CAP_BLUETOOTH)) {
-		retval = device_create_file(&acer_platform_device->dev,
-			&dev_attr_bluetooth);
-		if (retval)
-			goto error_sysfs;
-	}
-
 	if (has_cap(ACER_CAP_THREEG)) {
 		retval = device_create_file(&acer_platform_device->dev,
 			&dev_attr_threeg);
diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c
index 7c6dfd0..a9d5228 100644
--- a/drivers/misc/asus-laptop.c
+++ b/drivers/misc/asus-laptop.c
@@ -139,6 +139,7 @@
 	    "\\_SB.PCI0.PX40.ECD0._Q10",	/* L3C */
 	    "\\_SB.PCI0.PX40.EC0.Q10",	/* M1A */
 	    "\\_SB.PCI0.LPCB.EC0._Q10",	/* P30 */
+	    "\\_SB.PCI0.LPCB.EC0._Q0E", /* P30/P35 */
 	    "\\_SB.PCI0.PX40.Q10",	/* S1x */
 	    "\\Q10");		/* A2x, L2D, L3D, M2E */
 
@@ -280,7 +281,7 @@
 
 static int read_wireless_status(int mask)
 {
-	ulong status;
+	unsigned long long status;
 	acpi_status rv = AE_OK;
 
 	if (!wireless_status_handle)
@@ -297,7 +298,7 @@
 
 static int read_gps_status(void)
 {
-	ulong status;
+	unsigned long long status;
 	acpi_status rv = AE_OK;
 
 	rv = acpi_evaluate_integer(gps_status_handle, NULL, NULL, &status);
@@ -350,7 +351,7 @@
 	static void object##_led_set(struct led_classdev *led_cdev,	\
 				     enum led_brightness value)		\
 	{								\
-		object##_led_wk = value;				\
+		object##_led_wk = (value > 0) ? 1 : 0;			\
 		queue_work(led_workqueue, &object##_led_work);		\
 	}								\
 	static void object##_led_update(struct work_struct *ignored)	\
@@ -404,7 +405,7 @@
 
 static int read_brightness(struct backlight_device *bd)
 {
-	ulong value;
+	unsigned long long value;
 	acpi_status rv = AE_OK;
 
 	rv = acpi_evaluate_integer(brightness_get_handle, NULL, NULL, &value);
@@ -455,7 +456,7 @@
 			  struct device_attribute *attr, char *page)
 {
 	int len = 0;
-	ulong temp;
+	unsigned long long temp;
 	char buf[16];		//enough for all info
 	acpi_status rv = AE_OK;
 
@@ -603,7 +604,7 @@
 
 static int read_display(void)
 {
-	ulong value = 0;
+	unsigned long long value = 0;
 	acpi_status rv = AE_OK;
 
 	/* In most of the case, we know how to set the display, but sometime
@@ -849,7 +850,7 @@
 {
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	union acpi_object *model = NULL;
-	ulong bsts_result, hwrs_result;
+	unsigned long long bsts_result, hwrs_result;
 	char *string = NULL;
 	acpi_status status;
 
@@ -996,7 +997,7 @@
 	hotk->handle = device->handle;
 	strcpy(acpi_device_name(device), ASUS_HOTK_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ASUS_HOTK_CLASS);
-	acpi_driver_data(device) = hotk;
+	device->driver_data = hotk;
 	hotk->device = device;
 
 	result = asus_hotk_check();
diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c
index 1ee8501..9ef98b2 100644
--- a/drivers/misc/eeepc-laptop.c
+++ b/drivers/misc/eeepc-laptop.c
@@ -28,6 +28,8 @@
 #include <acpi/acpi_drivers.h>
 #include <acpi/acpi_bus.h>
 #include <linux/uaccess.h>
+#include <linux/input.h>
+#include <linux/rfkill.h>
 
 #define EEEPC_LAPTOP_VERSION	"0.1"
 
@@ -125,6 +127,10 @@
 					   by this BIOS */
 	uint init_flag;			/* Init flags */
 	u16 event_count[128];		/* count for each event */
+	struct input_dev *inputdev;
+	u16 *keycode_map;
+	struct rfkill *eeepc_wlan_rfkill;
+	struct rfkill *eeepc_bluetooth_rfkill;
 };
 
 /* The actual device the driver binds to */
@@ -140,6 +146,27 @@
 
 static struct platform_device *platform_device;
 
+struct key_entry {
+	char type;
+	u8 code;
+	u16 keycode;
+};
+
+enum { KE_KEY, KE_END };
+
+static struct key_entry eeepc_keymap[] = {
+	/* Sleep already handled via generic ACPI code */
+	{KE_KEY, 0x10, KEY_WLAN },
+	{KE_KEY, 0x12, KEY_PROG1 },
+	{KE_KEY, 0x13, KEY_MUTE },
+	{KE_KEY, 0x14, KEY_VOLUMEDOWN },
+	{KE_KEY, 0x15, KEY_VOLUMEUP },
+	{KE_KEY, 0x30, KEY_SWITCHVIDEOMODE },
+	{KE_KEY, 0x31, KEY_SWITCHVIDEOMODE },
+	{KE_KEY, 0x32, KEY_SWITCHVIDEOMODE },
+	{KE_END, 0},
+};
+
 /*
  * The hotkey driver declaration
  */
@@ -204,7 +231,7 @@
 static int read_acpi_int(acpi_handle handle, const char *method, int *val)
 {
 	acpi_status status;
-	ulong result;
+	unsigned long long result;
 
 	status = acpi_evaluate_integer(handle, (char *)method, NULL, &result);
 	if (ACPI_FAILURE(status)) {
@@ -261,6 +288,44 @@
 }
 
 /*
+ * Rfkill helpers
+ */
+
+static int eeepc_wlan_rfkill_set(void *data, enum rfkill_state state)
+{
+	if (state == RFKILL_STATE_SOFT_BLOCKED)
+		return set_acpi(CM_ASL_WLAN, 0);
+	else
+		return set_acpi(CM_ASL_WLAN, 1);
+}
+
+static int eeepc_wlan_rfkill_state(void *data, enum rfkill_state *state)
+{
+	if (get_acpi(CM_ASL_WLAN) == 1)
+		*state = RFKILL_STATE_UNBLOCKED;
+	else
+		*state = RFKILL_STATE_SOFT_BLOCKED;
+	return 0;
+}
+
+static int eeepc_bluetooth_rfkill_set(void *data, enum rfkill_state state)
+{
+	if (state == RFKILL_STATE_SOFT_BLOCKED)
+		return set_acpi(CM_ASL_BLUETOOTH, 0);
+	else
+		return set_acpi(CM_ASL_BLUETOOTH, 1);
+}
+
+static int eeepc_bluetooth_rfkill_state(void *data, enum rfkill_state *state)
+{
+	if (get_acpi(CM_ASL_BLUETOOTH) == 1)
+		*state = RFKILL_STATE_UNBLOCKED;
+	else
+		*state = RFKILL_STATE_SOFT_BLOCKED;
+	return 0;
+}
+
+/*
  * Sys helpers
  */
 static int parse_arg(const char *buf, unsigned long count, int *val)
@@ -311,13 +376,11 @@
 EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA);
 EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER);
 EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH);
-EEEPC_CREATE_DEVICE_ATTR(wlan, CM_ASL_WLAN);
 
 static struct attribute *platform_attributes[] = {
 	&dev_attr_camera.attr,
 	&dev_attr_cardr.attr,
 	&dev_attr_disp.attr,
-	&dev_attr_wlan.attr,
 	NULL
 };
 
@@ -328,8 +391,64 @@
 /*
  * Hotkey functions
  */
+static struct key_entry *eepc_get_entry_by_scancode(int code)
+{
+	struct key_entry *key;
+
+	for (key = eeepc_keymap; key->type != KE_END; key++)
+		if (code == key->code)
+			return key;
+
+	return NULL;
+}
+
+static struct key_entry *eepc_get_entry_by_keycode(int code)
+{
+	struct key_entry *key;
+
+	for (key = eeepc_keymap; key->type != KE_END; key++)
+		if (code == key->keycode && key->type == KE_KEY)
+			return key;
+
+	return NULL;
+}
+
+static int eeepc_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+{
+	struct key_entry *key = eepc_get_entry_by_scancode(scancode);
+
+	if (key && key->type == KE_KEY) {
+		*keycode = key->keycode;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int eeepc_setkeycode(struct input_dev *dev, int scancode, int keycode)
+{
+	struct key_entry *key;
+	int old_keycode;
+
+	if (keycode < 0 || keycode > KEY_MAX)
+		return -EINVAL;
+
+	key = eepc_get_entry_by_scancode(scancode);
+	if (key && key->type == KE_KEY) {
+		old_keycode = key->keycode;
+		key->keycode = keycode;
+		set_bit(keycode, dev->keybit);
+		if (!eepc_get_entry_by_keycode(old_keycode))
+			clear_bit(old_keycode, dev->keybit);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
 static int eeepc_hotk_check(void)
 {
+	const struct key_entry *key;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	int result;
 
@@ -356,6 +475,31 @@
 			       "Get control methods supported: 0x%x\n",
 			       ehotk->cm_supported);
 		}
+		ehotk->inputdev = input_allocate_device();
+		if (!ehotk->inputdev) {
+			printk(EEEPC_INFO "Unable to allocate input device\n");
+			return 0;
+		}
+		ehotk->inputdev->name = "Asus EeePC extra buttons";
+		ehotk->inputdev->phys = EEEPC_HOTK_FILE "/input0";
+		ehotk->inputdev->id.bustype = BUS_HOST;
+		ehotk->inputdev->getkeycode = eeepc_getkeycode;
+		ehotk->inputdev->setkeycode = eeepc_setkeycode;
+
+		for (key = eeepc_keymap; key->type != KE_END; key++) {
+			switch (key->type) {
+			case KE_KEY:
+				set_bit(EV_KEY, ehotk->inputdev->evbit);
+				set_bit(key->keycode, ehotk->inputdev->keybit);
+				break;
+			}
+		}
+		result = input_register_device(ehotk->inputdev);
+		if (result) {
+			printk(EEEPC_INFO "Unable to register input device\n");
+			input_free_device(ehotk->inputdev);
+			return 0;
+		}
 	} else {
 		printk(EEEPC_ERR "Hotkey device not present, aborting\n");
 		return -EINVAL;
@@ -363,21 +507,6 @@
 	return 0;
 }
 
-static void notify_wlan(u32 *event)
-{
-	/* if DISABLE_ASL_WLAN is set, the notify code for fn+f2
-	   will always be 0x10 */
-	if (ehotk->cm_supported & (0x1 << CM_ASL_WLAN)) {
-		const char *method = cm_getv[CM_ASL_WLAN];
-		int value;
-		if (read_acpi_int(ehotk->handle, method, &value))
-			printk(EEEPC_WARNING "Error reading %s\n",
-			       method);
-		else if (value == 1)
-			*event = 0x11;
-	}
-}
-
 static void notify_brn(void)
 {
 	struct backlight_device *bd = eeepc_backlight_device;
@@ -386,14 +515,28 @@
 
 static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
 {
+	static struct key_entry *key;
 	if (!ehotk)
 		return;
-	if (event == NOTIFY_WLAN_ON && (DISABLE_ASL_WLAN & ehotk->init_flag))
-		notify_wlan(&event);
 	if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX)
 		notify_brn();
 	acpi_bus_generate_proc_event(ehotk->device, event,
 				     ehotk->event_count[event % 128]++);
+	if (ehotk->inputdev) {
+		key = eepc_get_entry_by_scancode(event);
+		if (key) {
+			switch (key->type) {
+			case KE_KEY:
+				input_report_key(ehotk->inputdev, key->keycode,
+						 1);
+				input_sync(ehotk->inputdev);
+				input_report_key(ehotk->inputdev, key->keycode,
+						 0);
+				input_sync(ehotk->inputdev);
+				break;
+			}
+		}
+	}
 }
 
 static int eeepc_hotk_add(struct acpi_device *device)
@@ -411,7 +554,7 @@
 	ehotk->handle = device->handle;
 	strcpy(acpi_device_name(device), EEEPC_HOTK_DEVICE_NAME);
 	strcpy(acpi_device_class(device), EEEPC_HOTK_CLASS);
-	acpi_driver_data(device) = ehotk;
+	device->driver_data = ehotk;
 	ehotk->device = device;
 	result = eeepc_hotk_check();
 	if (result)
@@ -420,6 +563,47 @@
 					     eeepc_hotk_notify, ehotk);
 	if (ACPI_FAILURE(status))
 		printk(EEEPC_ERR "Error installing notify handler\n");
+
+	if (get_acpi(CM_ASL_WLAN) != -1) {
+		ehotk->eeepc_wlan_rfkill = rfkill_allocate(&device->dev,
+							   RFKILL_TYPE_WLAN);
+
+		if (!ehotk->eeepc_wlan_rfkill)
+			goto end;
+
+		ehotk->eeepc_wlan_rfkill->name = "eeepc-wlan";
+		ehotk->eeepc_wlan_rfkill->toggle_radio = eeepc_wlan_rfkill_set;
+		ehotk->eeepc_wlan_rfkill->get_state = eeepc_wlan_rfkill_state;
+		if (get_acpi(CM_ASL_WLAN) == 1)
+			ehotk->eeepc_wlan_rfkill->state =
+				RFKILL_STATE_UNBLOCKED;
+		else
+			ehotk->eeepc_wlan_rfkill->state =
+				RFKILL_STATE_SOFT_BLOCKED;
+		rfkill_register(ehotk->eeepc_wlan_rfkill);
+	}
+
+	if (get_acpi(CM_ASL_BLUETOOTH) != -1) {
+		ehotk->eeepc_bluetooth_rfkill =
+			rfkill_allocate(&device->dev, RFKILL_TYPE_BLUETOOTH);
+
+		if (!ehotk->eeepc_bluetooth_rfkill)
+			goto end;
+
+		ehotk->eeepc_bluetooth_rfkill->name = "eeepc-bluetooth";
+		ehotk->eeepc_bluetooth_rfkill->toggle_radio =
+			eeepc_bluetooth_rfkill_set;
+		ehotk->eeepc_bluetooth_rfkill->get_state =
+			eeepc_bluetooth_rfkill_state;
+		if (get_acpi(CM_ASL_BLUETOOTH) == 1)
+			ehotk->eeepc_bluetooth_rfkill->state =
+				RFKILL_STATE_UNBLOCKED;
+		else
+			ehotk->eeepc_bluetooth_rfkill->state =
+				RFKILL_STATE_SOFT_BLOCKED;
+		rfkill_register(ehotk->eeepc_bluetooth_rfkill);
+	}
+
  end:
 	if (result) {
 		kfree(ehotk);
@@ -553,6 +737,12 @@
 {
 	if (eeepc_backlight_device)
 		backlight_device_unregister(eeepc_backlight_device);
+	if (ehotk->inputdev)
+		input_unregister_device(ehotk->inputdev);
+	if (ehotk->eeepc_wlan_rfkill)
+		rfkill_unregister(ehotk->eeepc_wlan_rfkill);
+	if (ehotk->eeepc_bluetooth_rfkill)
+		rfkill_unregister(ehotk->eeepc_bluetooth_rfkill);
 	eeepc_backlight_device = NULL;
 }
 
diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c
index 3e56203..d2cf0bf 100644
--- a/drivers/misc/fujitsu-laptop.c
+++ b/drivers/misc/fujitsu-laptop.c
@@ -44,8 +44,9 @@
  * Hotkeys present on certain Fujitsu laptops (eg: the S6xxx series) are
  * also supported by this driver.
  *
- * This driver has been tested on a Fujitsu Lifebook S6410 and S7020.  It
- * should work on most P-series and S-series Lifebooks, but YMMV.
+ * This driver has been tested on a Fujitsu Lifebook S6410, S7020 and
+ * P8010.  It should work on most P-series and S-series Lifebooks, but
+ * YMMV.
  *
  * The module parameter use_alt_lcd_levels switches between different ACPI
  * brightness controls which are used by different Fujitsu laptops.  In most
@@ -65,7 +66,7 @@
 #include <linux/video_output.h>
 #include <linux/platform_device.h>
 
-#define FUJITSU_DRIVER_VERSION "0.4.2"
+#define FUJITSU_DRIVER_VERSION "0.4.3"
 
 #define FUJITSU_LCD_N_LEVELS 8
 
@@ -83,10 +84,10 @@
 #define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS     0x87
 
 /* Hotkey details */
-#define LOCK_KEY	0x410	/* codes for the keys in the GIRB register */
-#define DISPLAY_KEY	0x411	/* keys are mapped to KEY_SCREENLOCK (the key with the key symbol) */
-#define ENERGY_KEY	0x412	/* KEY_MEDIA (the key with the laptop symbol, KEY_EMAIL (E key)) */
-#define REST_KEY	0x413	/* KEY_SUSPEND (R key) */
+#define KEY1_CODE	0x410	/* codes for the keys in the GIRB register */
+#define KEY2_CODE	0x411
+#define KEY3_CODE	0x412
+#define KEY4_CODE	0x413
 
 #define MAX_HOTKEY_RINGBUFFER_SIZE 100
 #define RINGBUFFERSIZE 40
@@ -123,6 +124,7 @@
 	char phys[32];
 	struct backlight_device *bl_device;
 	struct platform_device *pf_device;
+	int keycode1, keycode2, keycode3, keycode4;
 
 	unsigned int max_brightness;
 	unsigned int brightness_changed;
@@ -224,7 +226,7 @@
 
 static int get_lcd_level(void)
 {
-	unsigned long state = 0;
+	unsigned long long state = 0;
 	acpi_status status = AE_OK;
 
 	vdbg_printk(FUJLAPTOP_DBG_TRACE, "get lcd level via GBLL\n");
@@ -246,7 +248,7 @@
 
 static int get_max_brightness(void)
 {
-	unsigned long state = 0;
+	unsigned long long state = 0;
 	acpi_status status = AE_OK;
 
 	vdbg_printk(FUJLAPTOP_DBG_TRACE, "get max lcd level via RBLL\n");
@@ -263,7 +265,7 @@
 
 static int get_lcd_level_alt(void)
 {
-	unsigned long state = 0;
+	unsigned long long state = 0;
 	acpi_status status = AE_OK;
 
 	vdbg_printk(FUJLAPTOP_DBG_TRACE, "get lcd level via GBLS\n");
@@ -384,7 +386,7 @@
 
 static int get_irb(void)
 {
-	unsigned long state = 0;
+	unsigned long long state = 0;
 	acpi_status status = AE_OK;
 
 	vdbg_printk(FUJLAPTOP_DBG_TRACE, "Get irb\n");
@@ -430,7 +432,7 @@
 		   }
 };
 
-static int dmi_check_cb_s6410(const struct dmi_system_id *id)
+static void dmi_check_cb_common(const struct dmi_system_id *id)
 {
 	acpi_handle handle;
 	int have_blnf;
@@ -452,24 +454,40 @@
 			    "auto-detecting disable_adjust\n");
 		disable_brightness_adjust = have_blnf ? 0 : 1;
 	}
+}
+
+static int dmi_check_cb_s6410(const struct dmi_system_id *id)
+{
+	dmi_check_cb_common(id);
+	fujitsu->keycode1 = KEY_SCREENLOCK;	/* "Lock" */
+	fujitsu->keycode2 = KEY_HELP;	/* "Mobility Center" */
+	return 0;
+}
+
+static int dmi_check_cb_p8010(const struct dmi_system_id *id)
+{
+	dmi_check_cb_common(id);
+	fujitsu->keycode1 = KEY_HELP;	/* "Support" */
+	fujitsu->keycode3 = KEY_SWITCHVIDEOMODE;	/* "Presentation" */
+	fujitsu->keycode4 = KEY_WWW;	/* "Internet" */
 	return 0;
 }
 
 static struct dmi_system_id __initdata fujitsu_dmi_table[] = {
 	{
-	 .ident = "Fujitsu Siemens",
+	 .ident = "Fujitsu Siemens S6410",
 	 .matches = {
 		     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
 		     DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"),
 		     },
 	 .callback = dmi_check_cb_s6410},
 	{
-	 .ident = "FUJITSU LifeBook P8010",
+	 .ident = "Fujitsu LifeBook P8010",
 	 .matches = {
 		     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
 		     DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P8010"),
-		    },
-	 .callback = dmi_check_cb_s6410},
+		     },
+	 .callback = dmi_check_cb_p8010},
 	{}
 };
 
@@ -490,7 +508,7 @@
 	fujitsu->acpi_handle = device->handle;
 	sprintf(acpi_device_name(device), "%s", ACPI_FUJITSU_DEVICE_NAME);
 	sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS);
-	acpi_driver_data(device) = fujitsu;
+	device->driver_data = fujitsu;
 
 	status = acpi_install_notify_handler(device->handle,
 					     ACPI_DEVICE_NOTIFY,
@@ -547,7 +565,6 @@
 	}
 
 	/* do config (detect defaults) */
-	dmi_check_system(fujitsu_dmi_table);
 	use_alt_lcd_levels = use_alt_lcd_levels == 1 ? 1 : 0;
 	disable_brightness_keys = disable_brightness_keys == 1 ? 1 : 0;
 	disable_brightness_adjust = disable_brightness_adjust == 1 ? 1 : 0;
@@ -623,17 +640,17 @@
 			keycode = 0;
 			if (disable_brightness_keys != 1) {
 				if (oldb == 0) {
-					acpi_bus_generate_proc_event(fujitsu->
-						dev,
-						ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS,
-						0);
+					acpi_bus_generate_proc_event
+					    (fujitsu->dev,
+					     ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS,
+					     0);
 					keycode = KEY_BRIGHTNESSDOWN;
 				} else if (oldb ==
 					   (fujitsu->max_brightness) - 1) {
-					acpi_bus_generate_proc_event(fujitsu->
-						dev,
-						ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS,
-						0);
+					acpi_bus_generate_proc_event
+					    (fujitsu->dev,
+					     ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS,
+					     0);
 					keycode = KEY_BRIGHTNESSUP;
 				}
 			}
@@ -646,8 +663,7 @@
 			}
 			if (disable_brightness_keys != 1) {
 				acpi_bus_generate_proc_event(fujitsu->dev,
-					ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS,
-					0);
+					ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS, 0);
 				keycode = KEY_BRIGHTNESSUP;
 			}
 		} else if (oldb > newb) {
@@ -659,8 +675,7 @@
 			}
 			if (disable_brightness_keys != 1) {
 				acpi_bus_generate_proc_event(fujitsu->dev,
-					ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS,
-					0);
+					ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS, 0);
 				keycode = KEY_BRIGHTNESSDOWN;
 			}
 		} else {
@@ -703,7 +718,7 @@
 	sprintf(acpi_device_name(device), "%s",
 		ACPI_FUJITSU_HOTKEY_DEVICE_NAME);
 	sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS);
-	acpi_driver_data(device) = fujitsu_hotkey;
+	device->driver_data = fujitsu_hotkey;
 
 	status = acpi_install_notify_handler(device->handle,
 					     ACPI_DEVICE_NOTIFY,
@@ -742,10 +757,10 @@
 	input->id.product = 0x06;
 	input->dev.parent = &device->dev;
 	input->evbit[0] = BIT(EV_KEY);
-	set_bit(KEY_SCREENLOCK, input->keybit);
-	set_bit(KEY_MEDIA, input->keybit);
-	set_bit(KEY_EMAIL, input->keybit);
-	set_bit(KEY_SUSPEND, input->keybit);
+	set_bit(fujitsu->keycode1, input->keybit);
+	set_bit(fujitsu->keycode2, input->keybit);
+	set_bit(fujitsu->keycode3, input->keybit);
+	set_bit(fujitsu->keycode4, input->keybit);
 	set_bit(KEY_UNKNOWN, input->keybit);
 
 	error = input_register_device(input);
@@ -833,24 +848,24 @@
 				    irb);
 
 			switch (irb & 0x4ff) {
-			case LOCK_KEY:
-				keycode = KEY_SCREENLOCK;
+			case KEY1_CODE:
+				keycode = fujitsu->keycode1;
 				break;
-			case DISPLAY_KEY:
-				keycode = KEY_MEDIA;
+			case KEY2_CODE:
+				keycode = fujitsu->keycode2;
 				break;
-			case ENERGY_KEY:
-				keycode = KEY_EMAIL;
+			case KEY3_CODE:
+				keycode = fujitsu->keycode3;
 				break;
-			case REST_KEY:
-				keycode = KEY_SUSPEND;
+			case KEY4_CODE:
+				keycode = fujitsu->keycode4;
 				break;
 			case 0:
 				keycode = 0;
 				break;
 			default:
 				vdbg_printk(FUJLAPTOP_DBG_WARN,
-					"Unknown GIRB result [%x]\n", irb);
+					    "Unknown GIRB result [%x]\n", irb);
 				keycode = -1;
 				break;
 			}
@@ -859,12 +874,12 @@
 					"Push keycode into ringbuffer [%d]\n",
 					keycode);
 				status = kfifo_put(fujitsu_hotkey->fifo,
-						(unsigned char *)&keycode,
-						sizeof(keycode));
+						   (unsigned char *)&keycode,
+						   sizeof(keycode));
 				if (status != sizeof(keycode)) {
 					vdbg_printk(FUJLAPTOP_DBG_WARN,
-						"Could not push keycode [0x%x]\n",
-						keycode);
+					    "Could not push keycode [0x%x]\n",
+					    keycode);
 				} else {
 					input_report_key(input, keycode, 1);
 					input_sync(input);
@@ -879,8 +894,8 @@
 					input_report_key(input, keycode_r, 0);
 					input_sync(input);
 					vdbg_printk(FUJLAPTOP_DBG_TRACE,
-						    "Pop keycode from ringbuffer [%d]\n",
-						    keycode_r);
+					  "Pop keycode from ringbuffer [%d]\n",
+					  keycode_r);
 				}
 			}
 		}
@@ -943,6 +958,11 @@
 	if (!fujitsu)
 		return -ENOMEM;
 	memset(fujitsu, 0, sizeof(struct fujitsu_t));
+	fujitsu->keycode1 = KEY_PROG1;
+	fujitsu->keycode2 = KEY_PROG2;
+	fujitsu->keycode3 = KEY_PROG3;
+	fujitsu->keycode4 = KEY_PROG4;
+	dmi_check_system(fujitsu_dmi_table);
 
 	result = acpi_bus_register_driver(&acpi_fujitsu_driver);
 	if (result < 0) {
@@ -1076,15 +1096,14 @@
 MODULE_VERSION(FUJITSU_DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
-MODULE_ALIAS
-    ("dmi:*:svnFUJITSUSIEMENS:*:pvr:rvnFUJITSU:rnFJNB1D3:*:cvrS6410:*");
-MODULE_ALIAS
-    ("dmi:*:svnFUJITSU:*:pvr:rvnFUJITSU:rnFJNB19C:*:cvrS7020:*");
+MODULE_ALIAS("dmi:*:svnFUJITSUSIEMENS:*:pvr:rvnFUJITSU:rnFJNB1D3:*:cvrS6410:*");
+MODULE_ALIAS("dmi:*:svnFUJITSU:*:pvr:rvnFUJITSU:rnFJNB19C:*:cvrS7020:*");
 
 static struct pnp_device_id pnp_ids[] = {
-	{ .id = "FUJ02bf" },
-	{ .id = "FUJ02B1" },
-	{ .id = "FUJ02E3" },
-	{ .id = "" }
+	{.id = "FUJ02bf"},
+	{.id = "FUJ02B1"},
+	{.id = "FUJ02E3"},
+	{.id = ""}
 };
+
 MODULE_DEVICE_TABLE(pnp, pnp_ids);
diff --git a/drivers/misc/intel_menlow.c b/drivers/misc/intel_menlow.c
index 80a1363..e00a275 100644
--- a/drivers/misc/intel_menlow.c
+++ b/drivers/misc/intel_menlow.c
@@ -57,7 +57,7 @@
 {
 	struct acpi_device *device = cdev->devdata;
 	acpi_handle handle = device->handle;
-	unsigned long value;
+	unsigned long long value;
 	struct acpi_object_list arg_list;
 	union acpi_object arg;
 	acpi_status status = AE_OK;
@@ -90,7 +90,7 @@
 {
 	struct acpi_device *device = cdev->devdata;
 	acpi_handle handle = device->handle;
-	unsigned long value;
+	unsigned long long value;
 	struct acpi_object_list arg_list;
 	union acpi_object arg;
 	acpi_status status = AE_OK;
@@ -104,7 +104,7 @@
 	if (ACPI_FAILURE(status))
 		return -EFAULT;
 
-	return sprintf(buf, "%ld\n", value);
+	return sprintf(buf, "%llu\n", value);
 }
 
 static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev,
@@ -115,7 +115,7 @@
 	struct acpi_object_list arg_list;
 	union acpi_object arg;
 	acpi_status status;
-	int temp;
+	unsigned long long temp;
 	unsigned long max_state;
 
 	if (memory_get_int_max_bandwidth(cdev, &max_state))
@@ -131,7 +131,7 @@
 
 	status =
 	    acpi_evaluate_integer(handle, MEMORY_SET_BANDWIDTH, &arg_list,
-				  (unsigned long *)&temp);
+				  &temp);
 
 	printk(KERN_INFO
 	       "Bandwidth value was %d: status is %d\n", state, status);
@@ -175,7 +175,7 @@
 		goto end;
 	}
 
-	acpi_driver_data(device) = cdev;
+	device->driver_data = cdev;
 	result = sysfs_create_link(&device->dev.kobj,
 				&cdev->device.kobj, "thermal_cooling");
 	if (result)
@@ -252,7 +252,8 @@
  * @auxtype : AUX0/AUX1
  * @buf: syfs buffer
  */
-static int sensor_get_auxtrip(acpi_handle handle, int index, int *value)
+static int sensor_get_auxtrip(acpi_handle handle, int index,
+							unsigned long long *value)
 {
 	acpi_status status;
 
@@ -260,7 +261,7 @@
 		return -EINVAL;
 
 	status = acpi_evaluate_integer(handle, index ? GET_AUX1 : GET_AUX0,
-				       NULL, (unsigned long *)value);
+				       NULL, value);
 	if (ACPI_FAILURE(status))
 		return -EIO;
 
@@ -282,13 +283,13 @@
 	struct acpi_object_list args = {
 		1, &arg
 	};
-	int temp;
+	unsigned long long temp;
 
 	if (index != 0 && index != 1)
 		return -EINVAL;
 
 	status = acpi_evaluate_integer(handle, index ? GET_AUX0 : GET_AUX1,
-				       NULL, (unsigned long *)&temp);
+				       NULL, &temp);
 	if (ACPI_FAILURE(status))
 		return -EIO;
 	if ((index && value < temp) || (!index && value > temp))
@@ -296,7 +297,7 @@
 
 	arg.integer.value = value;
 	status = acpi_evaluate_integer(handle, index ? SET_AUX1 : SET_AUX0,
-				       &args, (unsigned long *)&temp);
+				       &args, &temp);
 	if (ACPI_FAILURE(status))
 		return -EIO;
 
@@ -312,7 +313,7 @@
 			 struct device_attribute *dev_attr, char *buf)
 {
 	struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr);
-	int value;
+	unsigned long long value;
 	int result;
 
 	result = sensor_get_auxtrip(attr->handle, 0, &value);
@@ -324,7 +325,7 @@
 			 struct device_attribute *dev_attr, char *buf)
 {
 	struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr);
-	int value;
+	unsigned long long value;
 	int result;
 
 	result = sensor_get_auxtrip(attr->handle, 1, &value);
@@ -376,7 +377,7 @@
 				 struct device_attribute *attr, char *buf)
 {
 	acpi_status status;
-	unsigned long bios_enabled;
+	unsigned long long bios_enabled;
 
 	status = acpi_evaluate_integer(NULL, BIOS_ENABLED, NULL, &bios_enabled);
 	if (ACPI_FAILURE(status))
@@ -492,7 +493,7 @@
 {
 	int result = -ENODEV;
 	acpi_status status;
-	unsigned long enable;
+	unsigned long long enable;
 
 	if (acpi_disabled)
 		return result;
diff --git a/drivers/misc/panasonic-laptop.c b/drivers/misc/panasonic-laptop.c
new file mode 100644
index 0000000..a2cb598
--- /dev/null
+++ b/drivers/misc/panasonic-laptop.c
@@ -0,0 +1,767 @@
+/*
+ *  Panasonic HotKey and LCD brightness control driver
+ *  (C) 2004 Hiroshi Miura <miura@da-cha.org>
+ *  (C) 2004 NTT DATA Intellilink Co. http://www.intellilink.co.jp/
+ *  (C) YOKOTA Hiroshi <yokota (at) netlab. is. tsukuba. ac. jp>
+ *  (C) 2004 David Bronaugh <dbronaugh>
+ *  (C) 2006-2008 Harald Welte <laforge@gnumonks.org>
+ *
+ *  derived from toshiba_acpi.c, Copyright (C) 2002-2004 John Belmonte
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publicshed by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307  USA
+ *
+ *---------------------------------------------------------------------------
+ *
+ * ChangeLog:
+ *	Sep.23, 2008	Harald Welte <laforge@gnumonks.org>
+ *		-v0.95	rename driver from drivers/acpi/pcc_acpi.c to
+ *			drivers/misc/panasonic-laptop.c
+ *
+ * 	Jul.04, 2008	Harald Welte <laforge@gnumonks.org>
+ * 		-v0.94	replace /proc interface with device attributes
+ * 			support {set,get}keycode on th input device
+ *
+ *      Jun.27, 2008	Harald Welte <laforge@gnumonks.org>
+ *      	-v0.92	merge with 2.6.26-rc6 input API changes
+ *      		remove broken <= 2.6.15 kernel support
+ *      		resolve all compiler warnings
+ *      		various coding style fixes (checkpatch.pl)
+ *      		add support for backlight api
+ *      		major code restructuring
+ *
+ * 	Dac.28, 2007	Harald Welte <laforge@gnumonks.org>
+ * 		-v0.91	merge with 2.6.24-rc6 ACPI changes
+ *
+ * 	Nov.04, 2006	Hiroshi Miura <miura@da-cha.org>
+ * 		-v0.9	remove warning about section reference.
+ * 			remove acpi_os_free
+ * 			add /proc/acpi/pcc/brightness interface for HAL access
+ * 			merge dbronaugh's enhancement
+ * 			Aug.17, 2004 David Bronaugh (dbronaugh)
+ *  				- Added screen brightness setting interface
+ *				  Thanks to FreeBSD crew (acpi_panasonic.c)
+ * 				  for the ideas I needed to accomplish it
+ *
+ *	May.29, 2006	Hiroshi Miura <miura@da-cha.org>
+ *		-v0.8.4 follow to change keyinput structure
+ *			thanks Fabian Yamaguchi <fabs@cs.tu-berlin.de>,
+ *			Jacob Bower <jacob.bower@ic.ac.uk> and
+ *			Hiroshi Yokota for providing solutions.
+ *
+ *	Oct.02, 2004	Hiroshi Miura <miura@da-cha.org>
+ *		-v0.8.2	merge code of YOKOTA Hiroshi
+ *					<yokota@netlab.is.tsukuba.ac.jp>.
+ *			Add sticky key mode interface.
+ *			Refactoring acpi_pcc_generate_keyinput().
+ *
+ *	Sep.15, 2004	Hiroshi Miura <miura@da-cha.org>
+ *		-v0.8	Generate key input event on input subsystem.
+ *			This is based on yet another driver written by
+ *							Ryuta Nakanishi.
+ *
+ *	Sep.10, 2004	Hiroshi Miura <miura@da-cha.org>
+ *		-v0.7	Change proc interface functions using seq_file
+ *			facility as same as other ACPI drivers.
+ *
+ *	Aug.28, 2004	Hiroshi Miura <miura@da-cha.org>
+ *		-v0.6.4 Fix a silly error with status checking
+ *
+ *	Aug.25, 2004	Hiroshi Miura <miura@da-cha.org>
+ *		-v0.6.3 replace read_acpi_int by standard function
+ *							acpi_evaluate_integer
+ *			some clean up and make smart copyright notice.
+ *			fix return value of pcc_acpi_get_key()
+ *			fix checking return value of acpi_bus_register_driver()
+ *
+ *      Aug.22, 2004    David Bronaugh <dbronaugh@linuxboxen.org>
+ *              -v0.6.2 Add check on ACPI data (num_sifr)
+ *                      Coding style cleanups, better error messages/handling
+ *			Fixed an off-by-one error in memory allocation
+ *
+ *      Aug.21, 2004    David Bronaugh <dbronaugh@linuxboxen.org>
+ *              -v0.6.1 Fix a silly error with status checking
+ *
+ *      Aug.20, 2004    David Bronaugh <dbronaugh@linuxboxen.org>
+ *              - v0.6  Correct brightness controls to reflect reality
+ *                      based on information gleaned by Hiroshi Miura
+ *                      and discussions with Hiroshi Miura
+ *
+ *	Aug.10, 2004	Hiroshi Miura <miura@da-cha.org>
+ *		- v0.5  support LCD brightness control
+ *			based on the disclosed information by MEI.
+ *
+ *	Jul.25, 2004	Hiroshi Miura <miura@da-cha.org>
+ *		- v0.4  first post version
+ *		        add function to retrive SIFR
+ *
+ *	Jul.24, 2004	Hiroshi Miura <miura@da-cha.org>
+ *		- v0.3  get proper status of hotkey
+ *
+ *      Jul.22, 2004	Hiroshi Miura <miura@da-cha.org>
+ *		- v0.2  add HotKey handler
+ *
+ *      Jul.17, 2004	Hiroshi Miura <miura@da-cha.org>
+ *		- v0.1  start from toshiba_acpi driver written by John Belmonte
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/backlight.h>
+#include <linux/ctype.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+#include <linux/input.h>
+
+
+#ifndef ACPI_HOTKEY_COMPONENT
+#define ACPI_HOTKEY_COMPONENT	0x10000000
+#endif
+
+#define _COMPONENT		ACPI_HOTKEY_COMPONENT
+
+MODULE_AUTHOR("Hiroshi Miura, David Bronaugh and Harald Welte");
+MODULE_DESCRIPTION("ACPI HotKey driver for Panasonic Let's Note laptops");
+MODULE_LICENSE("GPL");
+
+#define LOGPREFIX "pcc_acpi: "
+
+/* Define ACPI PATHs */
+/* Lets note hotkeys */
+#define METHOD_HKEY_QUERY	"HINF"
+#define METHOD_HKEY_SQTY	"SQTY"
+#define METHOD_HKEY_SINF	"SINF"
+#define METHOD_HKEY_SSET	"SSET"
+#define HKEY_NOTIFY		 0x80
+
+#define ACPI_PCC_DRIVER_NAME	"Panasonic Laptop Support"
+#define ACPI_PCC_DEVICE_NAME	"Hotkey"
+#define ACPI_PCC_CLASS		"pcc"
+
+#define ACPI_PCC_INPUT_PHYS	"panasonic/hkey0"
+
+/* LCD_TYPEs: 0 = Normal, 1 = Semi-transparent
+   ENV_STATEs: Normal temp=0x01, High temp=0x81, N/A=0x00
+*/
+enum SINF_BITS { SINF_NUM_BATTERIES = 0,
+		 SINF_LCD_TYPE,
+		 SINF_AC_MAX_BRIGHT,
+		 SINF_AC_MIN_BRIGHT,
+		 SINF_AC_CUR_BRIGHT,
+		 SINF_DC_MAX_BRIGHT,
+		 SINF_DC_MIN_BRIGHT,
+		 SINF_DC_CUR_BRIGHT,
+		 SINF_MUTE,
+		 SINF_RESERVED,
+		 SINF_ENV_STATE,
+		 SINF_STICKY_KEY = 0x80,
+	};
+/* R1 handles SINF_AC_CUR_BRIGHT as SINF_CUR_BRIGHT, doesn't know AC state */
+
+static int acpi_pcc_hotkey_add(struct acpi_device *device);
+static int acpi_pcc_hotkey_remove(struct acpi_device *device, int type);
+static int acpi_pcc_hotkey_resume(struct acpi_device *device);
+
+static const struct acpi_device_id pcc_device_ids[] = {
+	{ "MAT0012", 0},
+	{ "MAT0013", 0},
+	{ "MAT0018", 0},
+	{ "MAT0019", 0},
+	{ "", 0},
+};
+
+static struct acpi_driver acpi_pcc_driver = {
+	.name =		ACPI_PCC_DRIVER_NAME,
+	.class =	ACPI_PCC_CLASS,
+	.ids =		pcc_device_ids,
+	.ops =		{
+				.add =		acpi_pcc_hotkey_add,
+				.remove =	acpi_pcc_hotkey_remove,
+				.resume =       acpi_pcc_hotkey_resume,
+			},
+};
+
+#define KEYMAP_SIZE		11
+static const int initial_keymap[KEYMAP_SIZE] = {
+	/*  0 */ KEY_RESERVED,
+	/*  1 */ KEY_BRIGHTNESSDOWN,
+	/*  2 */ KEY_BRIGHTNESSUP,
+	/*  3 */ KEY_DISPLAYTOGGLE,
+	/*  4 */ KEY_MUTE,
+	/*  5 */ KEY_VOLUMEDOWN,
+	/*  6 */ KEY_VOLUMEUP,
+	/*  7 */ KEY_SLEEP,
+	/*  8 */ KEY_PROG1, /* Change CPU boost */
+	/*  9 */ KEY_BATTERY,
+	/* 10 */ KEY_SUSPEND,
+};
+
+struct pcc_acpi {
+	acpi_handle		handle;
+	unsigned long		num_sifr;
+	int			sticky_mode;
+	u32 			*sinf;
+	struct acpi_device	*device;
+	struct input_dev	*input_dev;
+	struct backlight_device	*backlight;
+	int			keymap[KEYMAP_SIZE];
+};
+
+struct pcc_keyinput {
+	struct acpi_hotkey      *hotkey;
+};
+
+/* method access functions */
+static int acpi_pcc_write_sset(struct pcc_acpi *pcc, int func, int val)
+{
+	union acpi_object in_objs[] = {
+		{ .integer.type  = ACPI_TYPE_INTEGER,
+		  .integer.value = func, },
+		{ .integer.type  = ACPI_TYPE_INTEGER,
+		  .integer.value = val, },
+	};
+	struct acpi_object_list params = {
+		.count   = ARRAY_SIZE(in_objs),
+		.pointer = in_objs,
+	};
+	acpi_status status = AE_OK;
+
+	ACPI_FUNCTION_TRACE("acpi_pcc_write_sset");
+
+	status = acpi_evaluate_object(pcc->handle, METHOD_HKEY_SSET,
+				      &params, NULL);
+
+	return status == AE_OK;
+}
+
+static inline int acpi_pcc_get_sqty(struct acpi_device *device)
+{
+	unsigned long long s;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE("acpi_pcc_get_sqty");
+
+	status = acpi_evaluate_integer(device->handle, METHOD_HKEY_SQTY,
+				       NULL, &s);
+	if (ACPI_SUCCESS(status))
+		return s;
+	else {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				  "evaluation error HKEY.SQTY\n"));
+		return -EINVAL;
+	}
+}
+
+static int acpi_pcc_retrieve_biosdata(struct pcc_acpi *pcc, u32 *sinf)
+{
+	acpi_status status;
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object *hkey = NULL;
+	int i;
+
+	ACPI_FUNCTION_TRACE("acpi_pcc_retrieve_biosdata");
+
+	status = acpi_evaluate_object(pcc->handle, METHOD_HKEY_SINF, 0,
+				      &buffer);
+	if (ACPI_FAILURE(status)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				  "evaluation error HKEY.SINF\n"));
+		return 0;
+	}
+
+	hkey = buffer.pointer;
+	if (!hkey || (hkey->type != ACPI_TYPE_PACKAGE)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid HKEY.SINF\n"));
+		goto end;
+	}
+
+	if (pcc->num_sifr < hkey->package.count) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				 "SQTY reports bad SINF length\n"));
+		status = AE_ERROR;
+		goto end;
+	}
+
+	for (i = 0; i < hkey->package.count; i++) {
+		union acpi_object *element = &(hkey->package.elements[i]);
+		if (likely(element->type == ACPI_TYPE_INTEGER)) {
+			sinf[i] = element->integer.value;
+		} else
+			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+					 "Invalid HKEY.SINF data\n"));
+	}
+	sinf[hkey->package.count] = -1;
+
+end:
+	kfree(buffer.pointer);
+	return status == AE_OK;
+}
+
+/* backlight API interface functions */
+
+/* This driver currently treats AC and DC brightness identical,
+ * since we don't need to invent an interface to the core ACPI
+ * logic to receive events in case a power supply is plugged in
+ * or removed */
+
+static int bl_get(struct backlight_device *bd)
+{
+	struct pcc_acpi *pcc = bl_get_data(bd);
+
+	if (!acpi_pcc_retrieve_biosdata(pcc, pcc->sinf))
+		return -EIO;
+
+	return pcc->sinf[SINF_AC_CUR_BRIGHT];
+}
+
+static int bl_set_status(struct backlight_device *bd)
+{
+	struct pcc_acpi *pcc = bl_get_data(bd);
+	int bright = bd->props.brightness;
+	int rc;
+
+	if (!acpi_pcc_retrieve_biosdata(pcc, pcc->sinf))
+		return -EIO;
+
+	if (bright < pcc->sinf[SINF_AC_MIN_BRIGHT])
+		bright = pcc->sinf[SINF_AC_MIN_BRIGHT];
+
+	if (bright < pcc->sinf[SINF_DC_MIN_BRIGHT])
+		bright = pcc->sinf[SINF_DC_MIN_BRIGHT];
+
+	if (bright < pcc->sinf[SINF_AC_MIN_BRIGHT] ||
+	    bright > pcc->sinf[SINF_AC_MAX_BRIGHT])
+		return -EINVAL;
+
+	rc = acpi_pcc_write_sset(pcc, SINF_AC_CUR_BRIGHT, bright);
+	if (rc < 0)
+		return rc;
+
+	return acpi_pcc_write_sset(pcc, SINF_DC_CUR_BRIGHT, bright);
+}
+
+static struct backlight_ops pcc_backlight_ops = {
+	.get_brightness	= bl_get,
+	.update_status	= bl_set_status,
+};
+
+
+/* sysfs user interface functions */
+
+static ssize_t show_numbatt(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct acpi_device *acpi = to_acpi_device(dev);
+	struct pcc_acpi *pcc = acpi_driver_data(acpi);
+
+	if (!acpi_pcc_retrieve_biosdata(pcc, pcc->sinf))
+		return -EIO;
+
+	return sprintf(buf, "%u\n", pcc->sinf[SINF_NUM_BATTERIES]);
+}
+
+static ssize_t show_lcdtype(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct acpi_device *acpi = to_acpi_device(dev);
+	struct pcc_acpi *pcc = acpi_driver_data(acpi);
+
+	if (!acpi_pcc_retrieve_biosdata(pcc, pcc->sinf))
+		return -EIO;
+
+	return sprintf(buf, "%u\n", pcc->sinf[SINF_LCD_TYPE]);
+}
+
+static ssize_t show_mute(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct acpi_device *acpi = to_acpi_device(dev);
+	struct pcc_acpi *pcc = acpi_driver_data(acpi);
+
+	if (!acpi_pcc_retrieve_biosdata(pcc, pcc->sinf))
+		return -EIO;
+
+	return sprintf(buf, "%u\n", pcc->sinf[SINF_MUTE]);
+}
+
+static ssize_t show_sticky(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct acpi_device *acpi = to_acpi_device(dev);
+	struct pcc_acpi *pcc = acpi_driver_data(acpi);
+
+	if (!acpi_pcc_retrieve_biosdata(pcc, pcc->sinf))
+		return -EIO;
+
+	return sprintf(buf, "%u\n", pcc->sinf[SINF_STICKY_KEY]);
+}
+
+static ssize_t set_sticky(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct acpi_device *acpi = to_acpi_device(dev);
+	struct pcc_acpi *pcc = acpi_driver_data(acpi);
+	int val;
+
+	if (count && sscanf(buf, "%i", &val) == 1 &&
+	    (val == 0 || val == 1)) {
+		acpi_pcc_write_sset(pcc, SINF_STICKY_KEY, val);
+		pcc->sticky_mode = val;
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(numbatt, S_IRUGO, show_numbatt, NULL);
+static DEVICE_ATTR(lcdtype, S_IRUGO, show_lcdtype, NULL);
+static DEVICE_ATTR(mute, S_IRUGO, show_mute, NULL);
+static DEVICE_ATTR(sticky_key, S_IRUGO | S_IWUSR, show_sticky, set_sticky);
+
+static struct attribute *pcc_sysfs_entries[] = {
+	&dev_attr_numbatt.attr,
+	&dev_attr_lcdtype.attr,
+	&dev_attr_mute.attr,
+	&dev_attr_sticky_key.attr,
+	NULL,
+};
+
+static struct attribute_group pcc_attr_group = {
+	.name	= NULL,		/* put in device directory */
+	.attrs	= pcc_sysfs_entries,
+};
+
+
+/* hotkey input device driver */
+
+static int pcc_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+{
+	struct pcc_acpi *pcc = input_get_drvdata(dev);
+
+	if (scancode >= ARRAY_SIZE(pcc->keymap))
+		return -EINVAL;
+
+	*keycode = pcc->keymap[scancode];
+
+	return 0;
+}
+
+static int keymap_get_by_keycode(struct pcc_acpi *pcc, int keycode)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pcc->keymap); i++) {
+		if (pcc->keymap[i] == keycode)
+			return i+1;
+	}
+
+	return 0;
+}
+
+static int pcc_setkeycode(struct input_dev *dev, int scancode, int keycode)
+{
+	struct pcc_acpi *pcc = input_get_drvdata(dev);
+	int oldkeycode;
+
+	if (scancode >= ARRAY_SIZE(pcc->keymap))
+		return -EINVAL;
+
+	if (keycode < 0 || keycode > KEY_MAX)
+		return -EINVAL;
+
+	oldkeycode = pcc->keymap[scancode];
+	pcc->keymap[scancode] = keycode;
+
+	set_bit(keycode, dev->keybit);
+
+	if (!keymap_get_by_keycode(pcc, oldkeycode))
+		clear_bit(oldkeycode, dev->keybit);
+
+	return 0;
+}
+
+static void acpi_pcc_generate_keyinput(struct pcc_acpi *pcc)
+{
+	struct input_dev *hotk_input_dev = pcc->input_dev;
+	int rc;
+	int key_code, hkey_num;
+	unsigned long long result;
+
+	ACPI_FUNCTION_TRACE("acpi_pcc_generate_keyinput");
+
+	rc = acpi_evaluate_integer(pcc->handle, METHOD_HKEY_QUERY,
+				   NULL, &result);
+	if (!ACPI_SUCCESS(rc)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				 "error getting hotkey status\n"));
+		return;
+	}
+
+	acpi_bus_generate_proc_event(pcc->device, HKEY_NOTIFY, result);
+
+	hkey_num = result & 0xf;
+
+	if (hkey_num < 0 || hkey_num > ARRAY_SIZE(pcc->keymap)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				  "hotkey number out of range: %d\n",
+				  hkey_num));
+		return;
+	}
+
+	key_code = pcc->keymap[hkey_num];
+
+	if (key_code != KEY_RESERVED) {
+		int pushed = (result & 0x80) ? TRUE : FALSE;
+
+		input_report_key(hotk_input_dev, key_code, pushed);
+		input_sync(hotk_input_dev);
+	}
+
+	return;
+}
+
+static void acpi_pcc_hotkey_notify(acpi_handle handle, u32 event, void *data)
+{
+	struct pcc_acpi *pcc = (struct pcc_acpi *) data;
+
+	ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_notify");
+
+	switch (event) {
+	case HKEY_NOTIFY:
+		acpi_pcc_generate_keyinput(pcc);
+		break;
+	default:
+		/* nothing to do */
+		break;
+	}
+}
+
+static int acpi_pcc_init_input(struct pcc_acpi *pcc)
+{
+	int i, rc;
+
+	ACPI_FUNCTION_TRACE("acpi_pcc_init_input");
+
+	pcc->input_dev = input_allocate_device();
+	if (!pcc->input_dev) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				  "Couldn't allocate input device for hotkey"));
+		return -ENOMEM;
+	}
+
+	pcc->input_dev->evbit[0] = BIT(EV_KEY);
+
+	pcc->input_dev->name = ACPI_PCC_DRIVER_NAME;
+	pcc->input_dev->phys = ACPI_PCC_INPUT_PHYS;
+	pcc->input_dev->id.bustype = BUS_HOST;
+	pcc->input_dev->id.vendor = 0x0001;
+	pcc->input_dev->id.product = 0x0001;
+	pcc->input_dev->id.version = 0x0100;
+	pcc->input_dev->getkeycode = pcc_getkeycode;
+	pcc->input_dev->setkeycode = pcc_setkeycode;
+
+	/* load initial keymap */
+	memcpy(pcc->keymap, initial_keymap, sizeof(pcc->keymap));
+
+	for (i = 0; i < ARRAY_SIZE(pcc->keymap); i++)
+		__set_bit(pcc->keymap[i], pcc->input_dev->keybit);
+	__clear_bit(KEY_RESERVED, pcc->input_dev->keybit);
+
+	input_set_drvdata(pcc->input_dev, pcc);
+
+	rc = input_register_device(pcc->input_dev);
+	if (rc < 0)
+		input_free_device(pcc->input_dev);
+
+	return rc;
+}
+
+/* kernel module interface */
+
+static int acpi_pcc_hotkey_resume(struct acpi_device *device)
+{
+	struct pcc_acpi *pcc = acpi_driver_data(device);
+	acpi_status status = AE_OK;
+
+	ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_resume");
+
+	if (device == NULL || pcc == NULL)
+		return -EINVAL;
+
+	ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Sticky mode restore: %d\n",
+			  pcc->sticky_mode));
+
+	status = acpi_pcc_write_sset(pcc, SINF_STICKY_KEY, pcc->sticky_mode);
+
+	return status == AE_OK ? 0 : -EINVAL;
+}
+
+static int acpi_pcc_hotkey_add(struct acpi_device *device)
+{
+	acpi_status status;
+	struct pcc_acpi *pcc;
+	int num_sifr, result;
+
+	ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_add");
+
+	if (!device)
+		return -EINVAL;
+
+	num_sifr = acpi_pcc_get_sqty(device);
+
+	if (num_sifr > 255) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "num_sifr too large"));
+		return -ENODEV;
+	}
+
+	pcc = kzalloc(sizeof(struct pcc_acpi), GFP_KERNEL);
+	if (!pcc) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				  "Couldn't allocate mem for pcc"));
+		return -ENOMEM;
+	}
+
+	pcc->sinf = kzalloc(sizeof(u32) * (num_sifr + 1), GFP_KERNEL);
+	if (!pcc->sinf) {
+		result = -ENOMEM;
+		goto out_hotkey;
+	}
+
+	pcc->device = device;
+	pcc->handle = device->handle;
+	pcc->num_sifr = num_sifr;
+	device->driver_data = pcc;
+	strcpy(acpi_device_name(device), ACPI_PCC_DEVICE_NAME);
+	strcpy(acpi_device_class(device), ACPI_PCC_CLASS);
+
+	result = acpi_pcc_init_input(pcc);
+	if (result) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				  "Error installing keyinput handler\n"));
+		goto out_sinf;
+	}
+
+	/* initialize hotkey input device */
+	status = acpi_install_notify_handler(pcc->handle, ACPI_DEVICE_NOTIFY,
+					     acpi_pcc_hotkey_notify, pcc);
+
+	if (ACPI_FAILURE(status)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				  "Error installing notify handler\n"));
+		result = -ENODEV;
+		goto out_input;
+	}
+
+	/* initialize backlight */
+	pcc->backlight = backlight_device_register("panasonic", NULL, pcc,
+						   &pcc_backlight_ops);
+	if (IS_ERR(pcc->backlight))
+		goto out_notify;
+
+	if (!acpi_pcc_retrieve_biosdata(pcc, pcc->sinf)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				 "Couldn't retrieve BIOS data\n"));
+		goto out_backlight;
+	}
+
+	/* read the initial brightness setting from the hardware */
+	pcc->backlight->props.max_brightness =
+					pcc->sinf[SINF_AC_MAX_BRIGHT];
+	pcc->backlight->props.brightness = pcc->sinf[SINF_AC_CUR_BRIGHT];
+
+	/* read the initial sticky key mode from the hardware */
+	pcc->sticky_mode = pcc->sinf[SINF_STICKY_KEY];
+
+	/* add sysfs attributes */
+	result = sysfs_create_group(&device->dev.kobj, &pcc_attr_group);
+	if (result)
+		goto out_backlight;
+
+	return 0;
+
+out_backlight:
+	backlight_device_unregister(pcc->backlight);
+out_notify:
+	acpi_remove_notify_handler(pcc->handle, ACPI_DEVICE_NOTIFY,
+				   acpi_pcc_hotkey_notify);
+out_input:
+	input_unregister_device(pcc->input_dev);
+	/* no need to input_free_device() since core input API refcount and
+	 * free()s the device */
+out_sinf:
+	kfree(pcc->sinf);
+out_hotkey:
+	kfree(pcc);
+
+	return result;
+}
+
+static int __init acpi_pcc_init(void)
+{
+	int result = 0;
+
+	ACPI_FUNCTION_TRACE("acpi_pcc_init");
+
+	if (acpi_disabled)
+		return -ENODEV;
+
+	result = acpi_bus_register_driver(&acpi_pcc_driver);
+	if (result < 0) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				  "Error registering hotkey driver\n"));
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int acpi_pcc_hotkey_remove(struct acpi_device *device, int type)
+{
+	struct pcc_acpi *pcc = acpi_driver_data(device);
+
+	ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_remove");
+
+	if (!device || !pcc)
+		return -EINVAL;
+
+	sysfs_remove_group(&device->dev.kobj, &pcc_attr_group);
+
+	backlight_device_unregister(pcc->backlight);
+
+	acpi_remove_notify_handler(pcc->handle, ACPI_DEVICE_NOTIFY,
+				   acpi_pcc_hotkey_notify);
+
+	input_unregister_device(pcc->input_dev);
+	/* no need to input_free_device() since core input API refcount and
+	 * free()s the device */
+
+	kfree(pcc->sinf);
+	kfree(pcc);
+
+	return 0;
+}
+
+static void __exit acpi_pcc_exit(void)
+{
+	ACPI_FUNCTION_TRACE("acpi_pcc_exit");
+
+	acpi_bus_unregister_driver(&acpi_pcc_driver);
+}
+
+module_init(acpi_pcc_init);
+module_exit(acpi_pcc_exit);
diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c
index 60775be..5a97d3a 100644
--- a/drivers/misc/sony-laptop.c
+++ b/drivers/misc/sony-laptop.c
@@ -970,7 +970,7 @@
 	/* set the last requested brightness level */
 	if (sony_backlight_device &&
 			!sony_backlight_update_status(sony_backlight_device))
-		printk(KERN_WARNING DRV_PFX "unable to restore brightness level");
+		printk(KERN_WARNING DRV_PFX "unable to restore brightness level\n");
 
 	/* re-initialize models with specific requirements */
 	dmi_check_system(sony_nc_ids);
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 6b93007..4db1cf9 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -159,7 +159,6 @@
 #define TPACPI_DEBUG  KERN_DEBUG  TPACPI_LOG
 
 #define TPACPI_DBG_ALL		0xffff
-#define TPACPI_DBG_ALL		0xffff
 #define TPACPI_DBG_INIT		0x0001
 #define TPACPI_DBG_EXIT		0x0002
 #define dbg_printk(a_dbg_level, format, arg...) \
@@ -543,7 +542,7 @@
 		return -ENODEV;
 	}
 
-	acpi_driver_data(ibm->acpi->device) = ibm;
+	ibm->acpi->device->driver_data = ibm;
 	sprintf(acpi_device_class(ibm->acpi->device), "%s/%s",
 		TPACPI_ACPI_EVENT_PREFIX,
 		ibm->name);
@@ -582,7 +581,8 @@
 
 	ibm->acpi->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL);
 	if (!ibm->acpi->driver) {
-		printk(TPACPI_ERR "kzalloc(ibm->driver) failed\n");
+		printk(TPACPI_ERR
+		       "failed to allocate memory for ibm->acpi->driver\n");
 		return -ENOMEM;
 	}
 
@@ -838,6 +838,13 @@
 	return 0;
 }
 
+static void tpacpi_disable_brightness_delay(void)
+{
+	if (acpi_evalf(hkey_handle, NULL, "PWMS", "qvd", 0))
+		printk(TPACPI_NOTICE
+			"ACPI backlight control delay disabled\n");
+}
+
 static int __init tpacpi_query_bcl_levels(acpi_handle handle)
 {
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -2139,6 +2146,8 @@
 	if (!tp_features.hotkey)
 		return 1;
 
+	tpacpi_disable_brightness_delay();
+
 	hotkey_dev_attributes = create_attr_set(13, NULL);
 	if (!hotkey_dev_attributes)
 		return -ENOMEM;
@@ -2512,6 +2521,8 @@
 
 static void hotkey_resume(void)
 {
+	tpacpi_disable_brightness_delay();
+
 	if (hotkey_mask_get())
 		printk(TPACPI_ERR
 		       "error while trying to read hot key mask "
@@ -5983,6 +5994,52 @@
 	flush_workqueue(tpacpi_wq);
 }
 
+static void fan_suspend(pm_message_t state)
+{
+	if (!fan_control_allowed)
+		return;
+
+	/* Store fan status in cache */
+	fan_get_status_safe(NULL);
+	if (tp_features.fan_ctrl_status_undef)
+		fan_control_desired_level = TP_EC_FAN_AUTO;
+}
+
+static void fan_resume(void)
+{
+	u8 saved_fan_level;
+	u8 current_level = 7;
+	bool do_set = false;
+
+	/* DSDT *always* updates status on resume */
+	tp_features.fan_ctrl_status_undef = 0;
+
+	saved_fan_level = fan_control_desired_level;
+	if (!fan_control_allowed ||
+	    (fan_get_status_safe(&current_level) < 0))
+		return;
+
+	switch (fan_control_access_mode) {
+	case TPACPI_FAN_WR_ACPI_SFAN:
+		do_set = (saved_fan_level > current_level);
+		break;
+	case TPACPI_FAN_WR_ACPI_FANS:
+	case TPACPI_FAN_WR_TPEC:
+		do_set = ((saved_fan_level & TP_EC_FAN_FULLSPEED) ||
+			  (saved_fan_level == 7 &&
+			   !(current_level & TP_EC_FAN_FULLSPEED)));
+		break;
+	default:
+		return;
+	}
+	if (do_set) {
+		printk(TPACPI_NOTICE
+			"restoring fan level to 0x%02x\n",
+			saved_fan_level);
+		fan_set_level_safe(saved_fan_level);
+	}
+}
+
 static int fan_read(char *p)
 {
 	int len = 0;
@@ -6174,6 +6231,8 @@
 	.read = fan_read,
 	.write = fan_write,
 	.exit = fan_exit,
+	.suspend = fan_suspend,
+	.resume = fan_resume,
 };
 
 /****************************************************************************
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 24c97d3..3d067c3 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -92,18 +92,17 @@
 	mutex_unlock(&open_lock);
 }
 
-static int mmc_blk_open(struct inode *inode, struct file *filp)
+static int mmc_blk_open(struct block_device *bdev, fmode_t mode)
 {
-	struct mmc_blk_data *md;
+	struct mmc_blk_data *md = mmc_blk_get(bdev->bd_disk);
 	int ret = -ENXIO;
 
-	md = mmc_blk_get(inode->i_bdev->bd_disk);
 	if (md) {
 		if (md->usage == 2)
-			check_disk_change(inode->i_bdev);
+			check_disk_change(bdev);
 		ret = 0;
 
-		if ((filp->f_mode & FMODE_WRITE) && md->read_only) {
+		if ((mode & FMODE_WRITE) && md->read_only) {
 			mmc_blk_put(md);
 			ret = -EROFS;
 		}
@@ -112,9 +111,9 @@
 	return ret;
 }
 
-static int mmc_blk_release(struct inode *inode, struct file *filp)
+static int mmc_blk_release(struct gendisk *disk, fmode_t mode)
 {
-	struct mmc_blk_data *md = inode->i_bdev->bd_disk->private_data;
+	struct mmc_blk_data *md = disk->private_data;
 
 	mmc_blk_put(md);
 	return 0;
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index 91fbba7..8c295f4 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -224,7 +224,7 @@
 	if (dev->blkdev) {
 		invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
 					0, -1);
-		close_bdev_excl(dev->blkdev);
+		close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
 	}
 
 	kfree(dev);
@@ -246,7 +246,7 @@
 		return NULL;
 
 	/* Get a handle on the device */
-	bdev = open_bdev_excl(devname, O_RDWR, NULL);
+	bdev = open_bdev_exclusive(devname, FMODE_READ|FMODE_WRITE, NULL);
 #ifndef MODULE
 	if (IS_ERR(bdev)) {
 
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 681d5ac..1409f01 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -133,15 +133,12 @@
 }
 
 
-static int blktrans_open(struct inode *i, struct file *f)
+static int blktrans_open(struct block_device *bdev, fmode_t mode)
 {
-	struct mtd_blktrans_dev *dev;
-	struct mtd_blktrans_ops *tr;
+	struct mtd_blktrans_dev *dev = bdev->bd_disk->private_data;
+	struct mtd_blktrans_ops *tr = dev->tr;
 	int ret = -ENODEV;
 
-	dev = i->i_bdev->bd_disk->private_data;
-	tr = dev->tr;
-
 	if (!try_module_get(dev->mtd->owner))
 		goto out;
 
@@ -164,15 +161,12 @@
 	return ret;
 }
 
-static int blktrans_release(struct inode *i, struct file *f)
+static int blktrans_release(struct gendisk *disk, fmode_t mode)
 {
-	struct mtd_blktrans_dev *dev;
-	struct mtd_blktrans_ops *tr;
+	struct mtd_blktrans_dev *dev = disk->private_data;
+	struct mtd_blktrans_ops *tr = dev->tr;
 	int ret = 0;
 
-	dev = i->i_bdev->bd_disk->private_data;
-	tr = dev->tr;
-
 	if (tr->release)
 		ret = tr->release(dev);
 
@@ -194,10 +188,10 @@
 	return -ENOTTY;
 }
 
-static int blktrans_ioctl(struct inode *inode, struct file *file,
+static int blktrans_ioctl(struct block_device *bdev, fmode_t mode,
 			      unsigned int cmd, unsigned long arg)
 {
-	struct mtd_blktrans_dev *dev = inode->i_bdev->bd_disk->private_data;
+	struct mtd_blktrans_dev *dev = bdev->bd_disk->private_data;
 	struct mtd_blktrans_ops *tr = dev->tr;
 
 	switch (cmd) {
@@ -215,7 +209,7 @@
 	.owner		= THIS_MODULE,
 	.open		= blktrans_open,
 	.release	= blktrans_release,
-	.ioctl		= blktrans_ioctl,
+	.locked_ioctl	= blktrans_ioctl,
 	.getgeo		= blktrans_getgeo,
 };
 
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 963840e..bcffeda 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -96,7 +96,7 @@
 		return -ENODEV;
 
 	/* You can't open the RO devices RW */
-	if ((file->f_mode & 2) && (minor & 1))
+	if ((file->f_mode & FMODE_WRITE) && (minor & 1))
 		return -EACCES;
 
 	lock_kernel();
@@ -114,7 +114,7 @@
 	}
 
 	/* You can't open it RW if it's not a writeable device */
-	if ((file->f_mode & 2) && !(mtd->flags & MTD_WRITEABLE)) {
+	if ((file->f_mode & FMODE_WRITE) && !(mtd->flags & MTD_WRITEABLE)) {
 		put_mtd_device(mtd);
 		ret = -EACCES;
 		goto out;
@@ -144,7 +144,7 @@
 	DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n");
 
 	/* Only sync if opened RW */
-	if ((file->f_mode & 2) && mtd->sync)
+	if ((file->f_mode & FMODE_WRITE) && mtd->sync)
 		mtd->sync(mtd);
 
 	put_mtd_device(mtd);
@@ -443,7 +443,7 @@
 	{
 		struct erase_info *erase;
 
-		if(!(file->f_mode & 2))
+		if(!(file->f_mode & FMODE_WRITE))
 			return -EPERM;
 
 		erase=kzalloc(sizeof(struct erase_info),GFP_KERNEL);
@@ -497,7 +497,7 @@
 		struct mtd_oob_buf __user *user_buf = argp;
 	        uint32_t retlen;
 
-		if(!(file->f_mode & 2))
+		if(!(file->f_mode & FMODE_WRITE))
 			return -EPERM;
 
 		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 85fa40a..9ba1f0b 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -1836,10 +1836,9 @@
 
 	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
 	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision < 0x20) {
-		dev_err(&pdev->dev,
-			   "This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n",
+		dev_info(&pdev->dev,
+			   "This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip, use 8139too\n",
 		           pdev->vendor, pdev->device, pdev->revision);
-		dev_err(&pdev->dev, "Try the \"8139too\" driver instead.\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 0daf8c1..63f906b 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -946,10 +946,9 @@
 	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
 	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
 		dev_info(&pdev->dev,
-			   "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
+			   "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip, use 8139cp\n",
 		       	   pdev->vendor, pdev->device, pdev->revision);
-		dev_info(&pdev->dev,
-			   "Use the \"8139cp\" driver for improved performance and stability.\n");
+		return -ENODEV;
 	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ad301ac..f749b40 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -464,6 +464,12 @@
 	  This is the driver for the onboard card of MIPS Magnum 4000,
 	  Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
 
+config XTENSA_XT2000_SONIC
+	tristate "Xtensa XT2000 onboard SONIC Ethernet support"
+	depends on XTENSA_PLATFORM_XT2000
+	help
+	  This is the driver for the onboard card of the Xtensa XT2000 board.
+
 config MIPS_AU1X00_ENET
 	bool "MIPS AU1000 Ethernet support"
 	depends on SOC_AU1X00
@@ -888,7 +894,7 @@
 	select CRC32
 	select MII
 	depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
-		SOC_AU1X00 || BLACKFIN || MN10300
+		MIPS || BLACKFIN || MN10300
 	help
 	  This is a driver for SMC's 91x series of Ethernet chipsets,
 	  including the SMC91C94 and the SMC91C111. Say Y if you want it
@@ -960,7 +966,7 @@
 	tristate "SMSC LAN911[5678] support"
 	select CRC32
 	select MII
-	depends on ARCH_PXA || SUPERH
+	depends on ARM || SUPERH
 	help
 	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
 	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
@@ -2003,6 +2009,11 @@
 
 	  If in doubt, say N.
 
+config IGB_DCA
+	bool "Enable DCA"
+	default y
+	depends on IGB && DCA && !(IGB=y && DCA=m)
+
 source "drivers/net/ixp2000/Kconfig"
 
 config MYRI_SBUS
@@ -2504,6 +2515,15 @@
 	  This driver supports the on-chip 1/10Gbit Ethernet controller on
 	  PA Semi's PWRficient line of chips.
 
+config MLX4_EN
+	tristate "Mellanox Technologies 10Gbit Ethernet support"
+	depends on PCI && INET
+	select MLX4_CORE
+	select INET_LRO
+	help
+	  This driver supports Mellanox Technologies ConnectX Ethernet
+	  devices.
+
 config MLX4_CORE
 	tristate
 	depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index fa2510b..f19acf8 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -227,6 +227,8 @@
 obj-$(CONFIG_MLX4_CORE) += mlx4/
 obj-$(CONFIG_ENC28J60) += enc28j60.o
 
+obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
+
 obj-$(CONFIG_MACB) += macb.o
 
 obj-$(CONFIG_ARM) += arm/
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 4207d6e..9a314d8 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -838,12 +838,12 @@
 
 	/* find the platform resources */
 
-	dev->irq  = platform_get_irq(pdev, 0);
-	if (dev->irq < 0) {
+	ret  = platform_get_irq(pdev, 0);
+	if (ret < 0) {
 		dev_err(&pdev->dev, "no IRQ specified\n");
-		ret = -ENXIO;
 		goto exit_mem;
 	}
+	dev->irq = ret;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res == NULL) {
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 8e2be24..832739f 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1341,18 +1341,24 @@
 	int i;
 
 	features &= ~(NETIF_F_ALL_CSUM | BOND_VLAN_FEATURES);
-	features |= NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_HIGHDMA |
-		    NETIF_F_GSO_MASK | NETIF_F_NO_CSUM;
+	features |=  NETIF_F_GSO_MASK | NETIF_F_NO_CSUM;
+
+	if (!bond->first_slave)
+		goto done;
+
+	features &= ~NETIF_F_ONE_FOR_ALL;
 
 	bond_for_each_slave(bond, slave, i) {
-		features = netdev_compute_features(features,
-						   slave->dev->features);
+		features = netdev_increment_features(features,
+						     slave->dev->features,
+						     NETIF_F_ONE_FOR_ALL);
 		if (slave->dev->hard_header_len > max_hard_header_len)
 			max_hard_header_len = slave->dev->hard_header_len;
 	}
 
+done:
 	features |= (bond_dev->features & BOND_VLAN_FEATURES);
-	bond_dev->features = features;
+	bond_dev->features = netdev_fix_features(features, NULL);
 	bond_dev->hard_header_len = max_hard_header_len;
 
 	return 0;
diff --git a/drivers/net/cxgb3/l2t.c b/drivers/net/cxgb3/l2t.c
index 4407ac9..ff1611f 100644
--- a/drivers/net/cxgb3/l2t.c
+++ b/drivers/net/cxgb3/l2t.c
@@ -431,6 +431,7 @@
 	for (i = 0; i < l2t_capacity; ++i) {
 		d->l2tab[i].idx = i;
 		d->l2tab[i].state = L2T_STATE_UNUSED;
+		__skb_queue_head_init(&d->l2tab[i].arpq);
 		spin_lock_init(&d->l2tab[i].lock);
 		atomic_set(&d->l2tab[i].refcnt, 0);
 	}
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index f42c23f..5a9083e 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -47,15 +47,6 @@
 #define CARDNAME	"dm9000"
 #define DRV_VERSION	"1.31"
 
-#ifdef CONFIG_BLACKFIN
-#define readsb	insb
-#define readsw	insw
-#define readsl	insl
-#define writesb	outsb
-#define writesw	outsw
-#define writesl	outsl
-#endif
-
 /*
  * Transmit timeout, default 5 seconds.
  */
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 5524271..82dd1a8 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"ehea"
-#define DRV_VERSION	"EHEA_0093"
+#define DRV_VERSION	"EHEA_0094"
 
 /* eHEA capability flags */
 #define DLPAR_PORT_ADD_REM 1
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index b70c531..422fcb9 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -2863,7 +2863,7 @@
 	struct ehea_adapter *adapter;
 
 	mutex_lock(&dlpar_mem_lock);
-	ehea_info("LPAR memory enlarged - re-initializing driver");
+	ehea_info("LPAR memory changed - re-initializing driver");
 
 	list_for_each_entry(adapter, &adapter_list, list)
 		if (adapter->active_ports) {
@@ -2900,13 +2900,6 @@
 			}
 		}
 
-	ehea_destroy_busmap();
-	ret = ehea_create_busmap();
-	if (ret) {
-		ehea_error("creating ehea busmap failed");
-		goto out;
-	}
-
 	clear_bit(__EHEA_STOP_XFER, &ehea_driver_flags);
 
 	list_for_each_entry(adapter, &adapter_list, list)
@@ -3519,9 +3512,21 @@
 static int ehea_mem_notifier(struct notifier_block *nb,
                              unsigned long action, void *data)
 {
+	struct memory_notify *arg = data;
 	switch (action) {
-	case MEM_OFFLINE:
-		ehea_info("memory has been removed");
+	case MEM_CANCEL_OFFLINE:
+		ehea_info("memory offlining canceled");
+		/* Readd canceled memory block */
+	case MEM_ONLINE:
+		ehea_info("memory is going online");
+		if (ehea_add_sect_bmap(arg->start_pfn, arg->nr_pages))
+			return NOTIFY_BAD;
+		ehea_rereg_mrs(NULL);
+		break;
+	case MEM_GOING_OFFLINE:
+		ehea_info("memory is going offline");
+		if (ehea_rem_sect_bmap(arg->start_pfn, arg->nr_pages))
+			return NOTIFY_BAD;
 		ehea_rereg_mrs(NULL);
 		break;
 	default:
diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c
index db8a925..9b61dc9 100644
--- a/drivers/net/ehea/ehea_qmr.c
+++ b/drivers/net/ehea/ehea_qmr.c
@@ -567,7 +567,7 @@
 static inline int ehea_init_top_bmap(struct ehea_top_bmap *ehea_top_bmap,
 				     int dir)
 {
-	if(!ehea_top_bmap->dir[dir]) {
+	if (!ehea_top_bmap->dir[dir]) {
 		ehea_top_bmap->dir[dir] =
 			kzalloc(sizeof(struct ehea_dir_bmap), GFP_KERNEL);
 		if (!ehea_top_bmap->dir[dir])
@@ -578,7 +578,7 @@
 
 static inline int ehea_init_bmap(struct ehea_bmap *ehea_bmap, int top, int dir)
 {
-	if(!ehea_bmap->top[top]) {
+	if (!ehea_bmap->top[top]) {
 		ehea_bmap->top[top] =
 			kzalloc(sizeof(struct ehea_top_bmap), GFP_KERNEL);
 		if (!ehea_bmap->top[top])
@@ -587,53 +587,124 @@
 	return ehea_init_top_bmap(ehea_bmap->top[top], dir);
 }
 
-static int ehea_create_busmap_callback(unsigned long pfn,
-				       unsigned long nr_pages, void *arg)
+static DEFINE_MUTEX(ehea_busmap_mutex);
+static unsigned long ehea_mr_len;
+
+#define EHEA_BUSMAP_ADD_SECT 1
+#define EHEA_BUSMAP_REM_SECT 0
+
+static void ehea_rebuild_busmap(void)
 {
-	unsigned long i, mr_len, start_section, end_section;
-	start_section = (pfn * PAGE_SIZE) / EHEA_SECTSIZE;
-	end_section = start_section + ((nr_pages * PAGE_SIZE) / EHEA_SECTSIZE);
-	mr_len = *(unsigned long *)arg;
+	u64 vaddr = EHEA_BUSMAP_START;
+	int top, dir, idx;
 
-	if (!ehea_bmap)
+	for (top = 0; top < EHEA_MAP_ENTRIES; top++) {
+		struct ehea_top_bmap *ehea_top;
+		int valid_dir_entries = 0;
+
+		if (!ehea_bmap->top[top])
+			continue;
+		ehea_top = ehea_bmap->top[top];
+		for (dir = 0; dir < EHEA_MAP_ENTRIES; dir++) {
+			struct ehea_dir_bmap *ehea_dir;
+			int valid_entries = 0;
+
+			if (!ehea_top->dir[dir])
+				continue;
+			valid_dir_entries++;
+			ehea_dir = ehea_top->dir[dir];
+			for (idx = 0; idx < EHEA_MAP_ENTRIES; idx++) {
+				if (!ehea_dir->ent[idx])
+					continue;
+				valid_entries++;
+				ehea_dir->ent[idx] = vaddr;
+				vaddr += EHEA_SECTSIZE;
+			}
+			if (!valid_entries) {
+				ehea_top->dir[dir] = NULL;
+				kfree(ehea_dir);
+			}
+		}
+		if (!valid_dir_entries) {
+			ehea_bmap->top[top] = NULL;
+			kfree(ehea_top);
+		}
+	}
+}
+
+static int ehea_update_busmap(unsigned long pfn, unsigned long pgnum, int add)
+{
+	unsigned long i, start_section, end_section;
+
+	if (!ehea_bmap) {
 		ehea_bmap = kzalloc(sizeof(struct ehea_bmap), GFP_KERNEL);
-	if (!ehea_bmap)
-		return -ENOMEM;
-
-	for (i = start_section; i < end_section; i++) {
-		int ret;
-		int top, dir, idx;
-		u64 vaddr;
-
-		top = ehea_calc_index(i, EHEA_TOP_INDEX_SHIFT);
-		dir = ehea_calc_index(i, EHEA_DIR_INDEX_SHIFT);
-
-		ret = ehea_init_bmap(ehea_bmap, top, dir);
-		if(ret)
-			return ret;
-
-		idx = i & EHEA_INDEX_MASK;
-		vaddr = EHEA_BUSMAP_START + mr_len + i * EHEA_SECTSIZE;
-
-		ehea_bmap->top[top]->dir[dir]->ent[idx] = vaddr;
+		if (!ehea_bmap)
+			return -ENOMEM;
 	}
 
-	mr_len += nr_pages * PAGE_SIZE;
-	*(unsigned long *)arg = mr_len;
+	start_section = (pfn * PAGE_SIZE) / EHEA_SECTSIZE;
+	end_section = start_section + ((pgnum * PAGE_SIZE) / EHEA_SECTSIZE);
+	/* Mark entries as valid or invalid only; address is assigned later */
+	for (i = start_section; i < end_section; i++) {
+		u64 flag;
+		int top = ehea_calc_index(i, EHEA_TOP_INDEX_SHIFT);
+		int dir = ehea_calc_index(i, EHEA_DIR_INDEX_SHIFT);
+		int idx = i & EHEA_INDEX_MASK;
+		
+		if (add) {
+			int ret = ehea_init_bmap(ehea_bmap, top, dir);
+			if (ret)
+				return ret;
+			flag = 1; /* valid */
+			ehea_mr_len += EHEA_SECTSIZE;
+		} else {
+			if (!ehea_bmap->top[top])
+				continue;
+			if (!ehea_bmap->top[top]->dir[dir])
+				continue;
+			flag = 0; /* invalid */
+			ehea_mr_len -= EHEA_SECTSIZE;
+		}
 
+		ehea_bmap->top[top]->dir[dir]->ent[idx] = flag;
+	}
+	ehea_rebuild_busmap(); /* Assign contiguous addresses for mr */
 	return 0;
 }
 
-static unsigned long ehea_mr_len;
+int ehea_add_sect_bmap(unsigned long pfn, unsigned long nr_pages)
+{
+	int ret;
 
-static DEFINE_MUTEX(ehea_busmap_mutex);
+	mutex_lock(&ehea_busmap_mutex);
+	ret = ehea_update_busmap(pfn, nr_pages, EHEA_BUSMAP_ADD_SECT);
+	mutex_unlock(&ehea_busmap_mutex);
+	return ret;
+}
+
+int ehea_rem_sect_bmap(unsigned long pfn, unsigned long nr_pages)
+{
+	int ret;
+
+	mutex_lock(&ehea_busmap_mutex);
+	ret = ehea_update_busmap(pfn, nr_pages, EHEA_BUSMAP_REM_SECT);
+	mutex_unlock(&ehea_busmap_mutex);
+	return ret;
+}
+
+static int ehea_create_busmap_callback(unsigned long pfn,
+				       unsigned long nr_pages, void *arg)
+{
+	return ehea_update_busmap(pfn, nr_pages, EHEA_BUSMAP_ADD_SECT);
+}
 
 int ehea_create_busmap(void)
 {
 	int ret;
+
 	mutex_lock(&ehea_busmap_mutex);
 	ehea_mr_len = 0;
-	ret = walk_memory_resource(0, 1ULL << MAX_PHYSMEM_BITS, &ehea_mr_len,
+	ret = walk_memory_resource(0, 1ULL << MAX_PHYSMEM_BITS, NULL,
 				   ehea_create_busmap_callback);
 	mutex_unlock(&ehea_busmap_mutex);
 	return ret;
diff --git a/drivers/net/ehea/ehea_qmr.h b/drivers/net/ehea/ehea_qmr.h
index 0bb6f92..1e58dc0 100644
--- a/drivers/net/ehea/ehea_qmr.h
+++ b/drivers/net/ehea/ehea_qmr.h
@@ -378,6 +378,8 @@
 
 void ehea_error_data(struct ehea_adapter *adapter, u64 res_handle);
 
+int ehea_add_sect_bmap(unsigned long pfn, unsigned long nr_pages);
+int ehea_rem_sect_bmap(unsigned long pfn, unsigned long nr_pages);
 int ehea_create_busmap(void);
 void ehea_destroy_busmap(void);
 u64 ehea_map_vaddr(void *caddr);
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index 4e4f683..aec3b97 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -401,6 +401,21 @@
 	return 0;
 }
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void mpc52xx_fec_poll_controller(struct net_device *dev)
+{
+	struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+
+	disable_irq(priv->t_irq);
+	mpc52xx_fec_tx_interrupt(priv->t_irq, dev);
+	enable_irq(priv->t_irq);
+	disable_irq(priv->r_irq);
+	mpc52xx_fec_rx_interrupt(priv->r_irq, dev);
+	enable_irq(priv->r_irq);
+}
+#endif
+
+
 /* This handles BestComm transmit task interrupts
  */
 static irqreturn_t mpc52xx_fec_tx_interrupt(int irq, void *dev_id)
@@ -926,6 +941,9 @@
 	ndev->tx_timeout	= mpc52xx_fec_tx_timeout;
 	ndev->watchdog_timeo	= FEC_WATCHDOG_TIMEOUT;
 	ndev->base_addr		= mem.start;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	ndev->poll_controller = mpc52xx_fec_poll_controller;
+#endif
 
 	priv->t_irq = priv->r_irq = ndev->irq = NO_IRQ; /* IRQ are free for now */
 
diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c
index 08e18bc..45dd9bd 100644
--- a/drivers/net/fec_mpc52xx_phy.c
+++ b/drivers/net/fec_mpc52xx_phy.c
@@ -2,6 +2,7 @@
  * Driver for the MPC5200 Fast Ethernet Controller - MDIO bus driver
  *
  * Copyright (C) 2007  Domen Puncer, Telargo, Inc.
+ * Copyright (C) 2008  Wolfram Sang, Pengutronix
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
@@ -21,58 +22,45 @@
 	struct mpc52xx_fec __iomem *regs;
 };
 
-static int mpc52xx_fec_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+static int mpc52xx_fec_mdio_transfer(struct mii_bus *bus, int phy_id,
+		int reg, u32 value)
 {
 	struct mpc52xx_fec_mdio_priv *priv = bus->priv;
 	struct mpc52xx_fec __iomem *fec;
 	int tries = 100;
-	u32 request = FEC_MII_READ_FRAME;
+
+	value |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK;
+	value |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK;
 
 	fec = priv->regs;
 	out_be32(&fec->ievent, FEC_IEVENT_MII);
-
-	request |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK;
-	request |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK;
-
-	out_be32(&priv->regs->mii_data, request);
+	out_be32(&priv->regs->mii_data, value);
 
 	/* wait for it to finish, this takes about 23 us on lite5200b */
 	while (!(in_be32(&fec->ievent) & FEC_IEVENT_MII) && --tries)
 		udelay(5);
 
-	if (tries == 0)
+	if (!tries)
 		return -ETIMEDOUT;
 
-	return in_be32(&priv->regs->mii_data) & FEC_MII_DATA_DATAMSK;
+	return value & FEC_MII_DATA_OP_RD ?
+		in_be32(&priv->regs->mii_data) & FEC_MII_DATA_DATAMSK : 0;
 }
 
-static int mpc52xx_fec_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 data)
+static int mpc52xx_fec_mdio_read(struct mii_bus *bus, int phy_id, int reg)
 {
-	struct mpc52xx_fec_mdio_priv *priv = bus->priv;
-	struct mpc52xx_fec __iomem *fec;
-	u32 value = data;
-	int tries = 100;
-
-	fec = priv->regs;
-	out_be32(&fec->ievent, FEC_IEVENT_MII);
-
-	value |= FEC_MII_WRITE_FRAME;
-	value |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK;
-	value |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK;
-
-	out_be32(&priv->regs->mii_data, value);
-
-	/* wait for request to finish */
-	while (!(in_be32(&fec->ievent) & FEC_IEVENT_MII) && --tries)
-		udelay(5);
-
-	if (tries == 0)
-		return -ETIMEDOUT;
-
-	return 0;
+	return mpc52xx_fec_mdio_transfer(bus, phy_id, reg, FEC_MII_READ_FRAME);
 }
 
-static int mpc52xx_fec_mdio_probe(struct of_device *of, const struct of_device_id *match)
+static int mpc52xx_fec_mdio_write(struct mii_bus *bus, int phy_id, int reg,
+		u16 data)
+{
+	return mpc52xx_fec_mdio_transfer(bus, phy_id, reg,
+		data | FEC_MII_WRITE_FRAME);
+}
+
+static int mpc52xx_fec_mdio_probe(struct of_device *of,
+		const struct of_device_id *match)
 {
 	struct device *dev = &of->dev;
 	struct device_node *np = of->node;
@@ -131,7 +119,8 @@
 	dev_set_drvdata(dev, bus);
 
 	/* set MII speed */
-	out_be32(&priv->regs->mii_speed, ((mpc52xx_find_ipb_freq(of->node) >> 20) / 5) << 1);
+	out_be32(&priv->regs->mii_speed,
+		((mpc52xx_find_ipb_freq(of->node) >> 20) / 5) << 1);
 
 	/* enable MII interrupt */
 	out_be32(&priv->regs->imask, in_be32(&priv->regs->imask) | FEC_IMASK_MII);
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index b5bb7ae..64b2011 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -161,7 +161,7 @@
 	struct gfar_private *priv = NULL;
 	struct gianfar_platform_data *einfo;
 	struct resource *r;
-	int err = 0;
+	int err = 0, irq;
 	DECLARE_MAC_BUF(mac);
 
 	einfo = (struct gianfar_platform_data *) pdev->dev.platform_data;
@@ -187,15 +187,25 @@
 
 	/* fill out IRQ fields */
 	if (einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
-		priv->interruptTransmit = platform_get_irq_byname(pdev, "tx");
-		priv->interruptReceive = platform_get_irq_byname(pdev, "rx");
-		priv->interruptError = platform_get_irq_byname(pdev, "error");
-		if (priv->interruptTransmit < 0 || priv->interruptReceive < 0 || priv->interruptError < 0)
+		irq = platform_get_irq_byname(pdev, "tx");
+		if (irq < 0)
 			goto regs_fail;
+		priv->interruptTransmit = irq;
+
+		irq = platform_get_irq_byname(pdev, "rx");
+		if (irq < 0)
+			goto regs_fail;
+		priv->interruptReceive = irq;
+
+		irq = platform_get_irq_byname(pdev, "error");
+		if (irq < 0)
+			goto regs_fail;
+		priv->interruptError = irq;
 	} else {
-		priv->interruptTransmit = platform_get_irq(pdev, 0);
-		if (priv->interruptTransmit < 0)
+		irq = platform_get_irq(pdev, 0);
+		if (irq < 0)
 			goto regs_fail;
+		priv->interruptTransmit = irq;
 	}
 
 	/* get a pointer to the register memory */
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index efcf21c..2ee262225 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -2604,8 +2604,16 @@
 		if (of_device_is_compatible(np, "ibm,emac-440ep") ||
 		    of_device_is_compatible(np, "ibm,emac-440gr"))
 			dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
-		if (of_device_is_compatible(np, "ibm,emac-405ez"))
+		if (of_device_is_compatible(np, "ibm,emac-405ez")) {
+#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CONTROL
 			dev->features |= EMAC_FTR_NO_FLOW_CONTROL_40x;
+#else
+			printk(KERN_ERR "%s: Flow control not disabled!\n",
+					np->full_name);
+			return -ENXIO;
+#endif
+		}
+
 	}
 
 	/* Fixup some feature bits based on the device tree */
diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ibm_newemac/mal.c
index 1839d3f..ecf9798 100644
--- a/drivers/net/ibm_newemac/mal.c
+++ b/drivers/net/ibm_newemac/mal.c
@@ -280,9 +280,11 @@
 	mal_schedule_poll(mal);
 	set_mal_dcrn(mal, MAL_TXEOBISR, r);
 
+#ifdef CONFIG_PPC_DCR_NATIVE
 	if (mal_has_feature(mal, MAL_FTR_CLEAR_ICINTSTAT))
 		mtdcri(SDR0, DCRN_SDR_ICINTSTAT,
 				(mfdcri(SDR0, DCRN_SDR_ICINTSTAT) | ICINTSTAT_ICTX));
+#endif
 
 	return IRQ_HANDLED;
 }
@@ -298,9 +300,11 @@
 	mal_schedule_poll(mal);
 	set_mal_dcrn(mal, MAL_RXEOBISR, r);
 
+#ifdef CONFIG_PPC_DCR_NATIVE
 	if (mal_has_feature(mal, MAL_FTR_CLEAR_ICINTSTAT))
 		mtdcri(SDR0, DCRN_SDR_ICINTSTAT,
 				(mfdcri(SDR0, DCRN_SDR_ICINTSTAT) | ICINTSTAT_ICRX));
+#endif
 
 	return IRQ_HANDLED;
 }
@@ -572,9 +576,18 @@
 		goto fail;
 	}
 
-	if (of_device_is_compatible(ofdev->node, "ibm,mcmal-405ez"))
+	if (of_device_is_compatible(ofdev->node, "ibm,mcmal-405ez")) {
+#if defined(CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT) && \
+		defined(CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR)
 		mal->features |= (MAL_FTR_CLEAR_ICINTSTAT |
 				MAL_FTR_COMMON_ERR_INT);
+#else
+		printk(KERN_ERR "%s: Support for 405EZ not enabled!\n",
+				ofdev->node->full_name);
+		err = -ENODEV;
+		goto fail;
+#endif
+	}
 
 	mal->txeob_irq = irq_of_parse_and_map(ofdev->node, 0);
 	mal->rxeob_irq = irq_of_parse_and_map(ofdev->node, 1);
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 93d02ef..1f397cd 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -38,10 +38,11 @@
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
 #include <linux/pci.h>
+#include <linux/pci-aspm.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/if_ether.h>
-#ifdef CONFIG_DCA
+#ifdef CONFIG_IGB_DCA
 #include <linux/dca.h>
 #endif
 #include "igb.h"
@@ -106,11 +107,11 @@
 static irqreturn_t igb_msix_rx(int irq, void *);
 static irqreturn_t igb_msix_tx(int irq, void *);
 static int igb_clean_rx_ring_msix(struct napi_struct *, int);
-#ifdef CONFIG_DCA
+#ifdef CONFIG_IGB_DCA
 static void igb_update_rx_dca(struct igb_ring *);
 static void igb_update_tx_dca(struct igb_ring *);
 static void igb_setup_dca(struct igb_adapter *);
-#endif /* CONFIG_DCA */
+#endif /* CONFIG_IGB_DCA */
 static bool igb_clean_tx_irq(struct igb_ring *);
 static int igb_poll(struct napi_struct *, int);
 static bool igb_clean_rx_irq_adv(struct igb_ring *, int *, int);
@@ -131,7 +132,7 @@
 static int igb_resume(struct pci_dev *);
 #endif
 static void igb_shutdown(struct pci_dev *);
-#ifdef CONFIG_DCA
+#ifdef CONFIG_IGB_DCA
 static int igb_notify_dca(struct notifier_block *, unsigned long, void *);
 static struct notifier_block dca_notifier = {
 	.notifier_call	= igb_notify_dca,
@@ -207,7 +208,7 @@
 	global_quad_port_a = 0;
 
 	ret = pci_register_driver(&igb_driver);
-#ifdef CONFIG_DCA
+#ifdef CONFIG_IGB_DCA
 	dca_register_notify(&dca_notifier);
 #endif
 	return ret;
@@ -223,7 +224,7 @@
  **/
 static void __exit igb_exit_module(void)
 {
-#ifdef CONFIG_DCA
+#ifdef CONFIG_IGB_DCA
 	dca_unregister_notify(&dca_notifier);
 #endif
 	pci_unregister_driver(&igb_driver);
@@ -966,10 +967,11 @@
 	struct net_device *netdev;
 	struct igb_adapter *adapter;
 	struct e1000_hw *hw;
+	struct pci_dev *us_dev;
 	const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
 	unsigned long mmio_start, mmio_len;
-	int i, err, pci_using_dac;
-	u16 eeprom_data = 0;
+	int i, err, pci_using_dac, pos;
+	u16 eeprom_data = 0, state = 0;
 	u16 eeprom_apme_mask = IGB_EEPROM_APME;
 	u32 part_num;
 	int bars, need_ioport;
@@ -1004,6 +1006,28 @@
 		}
 	}
 
+	/* 82575 requires that the pci-e link partner disable the L0s state */
+	switch (pdev->device) {
+	case E1000_DEV_ID_82575EB_COPPER:
+	case E1000_DEV_ID_82575EB_FIBER_SERDES:
+	case E1000_DEV_ID_82575GB_QUAD_COPPER:
+		us_dev = pdev->bus->self;
+		pos = pci_find_capability(us_dev, PCI_CAP_ID_EXP);
+		if (pos) {
+			pci_read_config_word(us_dev, pos + PCI_EXP_LNKCTL,
+			                     &state);
+			state &= ~PCIE_LINK_STATE_L0S;
+			pci_write_config_word(us_dev, pos + PCI_EXP_LNKCTL,
+			                      state);
+			printk(KERN_INFO "Disabling ASPM L0s upstream switch "
+			       "port %x:%x.%x\n", us_dev->bus->number,
+			       PCI_SLOT(us_dev->devfn),
+			       PCI_FUNC(us_dev->devfn));
+		}
+	default:
+		break;
+	}
+
 	err = pci_request_selected_regions(pdev, bars, igb_driver_name);
 	if (err)
 		goto err_pci_reg;
@@ -1237,7 +1261,7 @@
 	if (err)
 		goto err_register;
 
-#ifdef CONFIG_DCA
+#ifdef CONFIG_IGB_DCA
 	if ((adapter->flags & IGB_FLAG_HAS_DCA) &&
 	    (dca_add_requester(&pdev->dev) == 0)) {
 		adapter->flags |= IGB_FLAG_DCA_ENABLED;
@@ -1311,7 +1335,7 @@
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct igb_adapter *adapter = netdev_priv(netdev);
-#ifdef CONFIG_DCA
+#ifdef CONFIG_IGB_DCA
 	struct e1000_hw *hw = &adapter->hw;
 #endif
 
@@ -1323,7 +1347,7 @@
 
 	flush_scheduled_work();
 
-#ifdef CONFIG_DCA
+#ifdef CONFIG_IGB_DCA
 	if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
 		dev_info(&pdev->dev, "DCA disabled\n");
 		dca_remove_requester(&pdev->dev);
@@ -3271,7 +3295,7 @@
 	struct igb_adapter *adapter = tx_ring->adapter;
 	struct e1000_hw *hw = &adapter->hw;
 
-#ifdef CONFIG_DCA
+#ifdef CONFIG_IGB_DCA
 	if (adapter->flags & IGB_FLAG_DCA_ENABLED)
 		igb_update_tx_dca(tx_ring);
 #endif
@@ -3323,14 +3347,14 @@
 	if (netif_rx_schedule_prep(adapter->netdev, &rx_ring->napi))
 		__netif_rx_schedule(adapter->netdev, &rx_ring->napi);
 
-#ifdef CONFIG_DCA
+#ifdef CONFIG_IGB_DCA
 	if (adapter->flags & IGB_FLAG_DCA_ENABLED)
 		igb_update_rx_dca(rx_ring);
 #endif
 		return IRQ_HANDLED;
 }
 
-#ifdef CONFIG_DCA
+#ifdef CONFIG_IGB_DCA
 static void igb_update_rx_dca(struct igb_ring *rx_ring)
 {
 	u32 dca_rxctrl;
@@ -3450,7 +3474,7 @@
 
 	return ret_val ? NOTIFY_BAD : NOTIFY_DONE;
 }
-#endif /* CONFIG_DCA */
+#endif /* CONFIG_IGB_DCA */
 
 /**
  * igb_intr_msi - Interrupt Handler
@@ -3529,13 +3553,13 @@
 	int tx_clean_complete, work_done = 0;
 
 	/* this poll routine only supports one tx and one rx queue */
-#ifdef CONFIG_DCA
+#ifdef CONFIG_IGB_DCA
 	if (adapter->flags & IGB_FLAG_DCA_ENABLED)
 		igb_update_tx_dca(&adapter->tx_ring[0]);
 #endif
 	tx_clean_complete = igb_clean_tx_irq(&adapter->tx_ring[0]);
 
-#ifdef CONFIG_DCA
+#ifdef CONFIG_IGB_DCA
 	if (adapter->flags & IGB_FLAG_DCA_ENABLED)
 		igb_update_rx_dca(&adapter->rx_ring[0]);
 #endif
@@ -3563,7 +3587,7 @@
 	struct net_device *netdev = adapter->netdev;
 	int work_done = 0;
 
-#ifdef CONFIG_DCA
+#ifdef CONFIG_IGB_DCA
 	if (adapter->flags & IGB_FLAG_DCA_ENABLED)
 		igb_update_rx_dca(rx_ring);
 #endif
diff --git a/drivers/net/mlx4/Makefile b/drivers/net/mlx4/Makefile
index 0952a65..a7a97bf 100644
--- a/drivers/net/mlx4/Makefile
+++ b/drivers/net/mlx4/Makefile
@@ -1,4 +1,9 @@
 obj-$(CONFIG_MLX4_CORE)		+= mlx4_core.o
 
 mlx4_core-y :=	alloc.o catas.o cmd.o cq.o eq.o fw.o icm.o intf.o main.o mcg.o \
-		mr.o pd.o profile.o qp.o reset.o srq.o
+		mr.o pd.o port.o profile.o qp.o reset.o srq.o
+
+obj-$(CONFIG_MLX4_EN)               += mlx4_en.o
+
+mlx4_en-y := 	en_main.o en_tx.o en_rx.o en_params.o en_port.o en_cq.o \
+		en_resources.o en_netdev.o
diff --git a/drivers/net/mlx4/alloc.c b/drivers/net/mlx4/alloc.c
index b411b79..ad95d5f 100644
--- a/drivers/net/mlx4/alloc.c
+++ b/drivers/net/mlx4/alloc.c
@@ -48,13 +48,16 @@
 
 	obj = find_next_zero_bit(bitmap->table, bitmap->max, bitmap->last);
 	if (obj >= bitmap->max) {
-		bitmap->top = (bitmap->top + bitmap->max) & bitmap->mask;
+		bitmap->top = (bitmap->top + bitmap->max + bitmap->reserved_top)
+				& bitmap->mask;
 		obj = find_first_zero_bit(bitmap->table, bitmap->max);
 	}
 
 	if (obj < bitmap->max) {
 		set_bit(obj, bitmap->table);
-		bitmap->last = (obj + 1) & (bitmap->max - 1);
+		bitmap->last = (obj + 1);
+		if (bitmap->last == bitmap->max)
+			bitmap->last = 0;
 		obj |= bitmap->top;
 	} else
 		obj = -1;
@@ -66,16 +69,90 @@
 
 void mlx4_bitmap_free(struct mlx4_bitmap *bitmap, u32 obj)
 {
-	obj &= bitmap->max - 1;
+	mlx4_bitmap_free_range(bitmap, obj, 1);
+}
+
+static unsigned long find_aligned_range(unsigned long *bitmap,
+					u32 start, u32 nbits,
+					int len, int align)
+{
+	unsigned long end, i;
+
+again:
+	start = ALIGN(start, align);
+
+	while ((start < nbits) && test_bit(start, bitmap))
+		start += align;
+
+	if (start >= nbits)
+		return -1;
+
+	end = start+len;
+	if (end > nbits)
+		return -1;
+
+	for (i = start + 1; i < end; i++) {
+		if (test_bit(i, bitmap)) {
+			start = i + 1;
+			goto again;
+		}
+	}
+
+	return start;
+}
+
+u32 mlx4_bitmap_alloc_range(struct mlx4_bitmap *bitmap, int cnt, int align)
+{
+	u32 obj, i;
+
+	if (likely(cnt == 1 && align == 1))
+		return mlx4_bitmap_alloc(bitmap);
 
 	spin_lock(&bitmap->lock);
-	clear_bit(obj, bitmap->table);
+
+	obj = find_aligned_range(bitmap->table, bitmap->last,
+				 bitmap->max, cnt, align);
+	if (obj >= bitmap->max) {
+		bitmap->top = (bitmap->top + bitmap->max + bitmap->reserved_top)
+				& bitmap->mask;
+		obj = find_aligned_range(bitmap->table, 0, bitmap->max,
+					 cnt, align);
+	}
+
+	if (obj < bitmap->max) {
+		for (i = 0; i < cnt; i++)
+			set_bit(obj + i, bitmap->table);
+		if (obj == bitmap->last) {
+			bitmap->last = (obj + cnt);
+			if (bitmap->last >= bitmap->max)
+				bitmap->last = 0;
+		}
+		obj |= bitmap->top;
+	} else
+		obj = -1;
+
+	spin_unlock(&bitmap->lock);
+
+	return obj;
+}
+
+void mlx4_bitmap_free_range(struct mlx4_bitmap *bitmap, u32 obj, int cnt)
+{
+	u32 i;
+
+	obj &= bitmap->max + bitmap->reserved_top - 1;
+
+	spin_lock(&bitmap->lock);
+	for (i = 0; i < cnt; i++)
+		clear_bit(obj + i, bitmap->table);
 	bitmap->last = min(bitmap->last, obj);
-	bitmap->top = (bitmap->top + bitmap->max) & bitmap->mask;
+	bitmap->top = (bitmap->top + bitmap->max + bitmap->reserved_top)
+			& bitmap->mask;
 	spin_unlock(&bitmap->lock);
 }
 
-int mlx4_bitmap_init(struct mlx4_bitmap *bitmap, u32 num, u32 mask, u32 reserved)
+int mlx4_bitmap_init(struct mlx4_bitmap *bitmap, u32 num, u32 mask,
+		     u32 reserved_bot, u32 reserved_top)
 {
 	int i;
 
@@ -85,14 +162,16 @@
 
 	bitmap->last = 0;
 	bitmap->top  = 0;
-	bitmap->max  = num;
+	bitmap->max  = num - reserved_top;
 	bitmap->mask = mask;
+	bitmap->reserved_top = reserved_top;
 	spin_lock_init(&bitmap->lock);
-	bitmap->table = kzalloc(BITS_TO_LONGS(num) * sizeof (long), GFP_KERNEL);
+	bitmap->table = kzalloc(BITS_TO_LONGS(bitmap->max) *
+				sizeof (long), GFP_KERNEL);
 	if (!bitmap->table)
 		return -ENOMEM;
 
-	for (i = 0; i < reserved; ++i)
+	for (i = 0; i < reserved_bot; ++i)
 		set_bit(i, bitmap->table);
 
 	return 0;
diff --git a/drivers/net/mlx4/cq.c b/drivers/net/mlx4/cq.c
index 9bb50e3..b7ad282 100644
--- a/drivers/net/mlx4/cq.c
+++ b/drivers/net/mlx4/cq.c
@@ -300,7 +300,7 @@
 	INIT_RADIX_TREE(&cq_table->tree, GFP_ATOMIC);
 
 	err = mlx4_bitmap_init(&cq_table->bitmap, dev->caps.num_cqs,
-			       dev->caps.num_cqs - 1, dev->caps.reserved_cqs);
+			       dev->caps.num_cqs - 1, dev->caps.reserved_cqs, 0);
 	if (err)
 		return err;
 
diff --git a/drivers/net/mlx4/en_cq.c b/drivers/net/mlx4/en_cq.c
new file mode 100644
index 0000000..1368a80
--- /dev/null
+++ b/drivers/net/mlx4/en_cq.c
@@ -0,0 +1,146 @@
+/*
+ * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/mlx4/cq.h>
+#include <linux/mlx4/qp.h>
+#include <linux/mlx4/cmd.h>
+
+#include "mlx4_en.h"
+
+static void mlx4_en_cq_event(struct mlx4_cq *cq, enum mlx4_event event)
+{
+	return;
+}
+
+
+int mlx4_en_create_cq(struct mlx4_en_priv *priv,
+		      struct mlx4_en_cq *cq,
+		      int entries, int ring, enum cq_type mode)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int err;
+
+	cq->size = entries;
+	if (mode == RX)
+		cq->buf_size = cq->size * sizeof(struct mlx4_cqe);
+	else
+		cq->buf_size = sizeof(struct mlx4_cqe);
+
+	cq->ring = ring;
+	cq->is_tx = mode;
+	spin_lock_init(&cq->lock);
+
+	err = mlx4_alloc_hwq_res(mdev->dev, &cq->wqres,
+				cq->buf_size, 2 * PAGE_SIZE);
+	if (err)
+		return err;
+
+	err = mlx4_en_map_buffer(&cq->wqres.buf);
+	if (err)
+		mlx4_free_hwq_res(mdev->dev, &cq->wqres, cq->buf_size);
+
+	return err;
+}
+
+int mlx4_en_activate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int err;
+
+	cq->dev = mdev->pndev[priv->port];
+	cq->mcq.set_ci_db  = cq->wqres.db.db;
+	cq->mcq.arm_db     = cq->wqres.db.db + 1;
+	*cq->mcq.set_ci_db = 0;
+	*cq->mcq.arm_db    = 0;
+	cq->buf = (struct mlx4_cqe *) cq->wqres.buf.direct.buf;
+	memset(cq->buf, 0, cq->buf_size);
+
+	err = mlx4_cq_alloc(mdev->dev, cq->size, &cq->wqres.mtt, &mdev->priv_uar,
+			    cq->wqres.db.dma, &cq->mcq, cq->is_tx);
+	if (err)
+		return err;
+
+	cq->mcq.comp  = cq->is_tx ? mlx4_en_tx_irq : mlx4_en_rx_irq;
+	cq->mcq.event = mlx4_en_cq_event;
+
+	if (cq->is_tx) {
+		init_timer(&cq->timer);
+		cq->timer.function = mlx4_en_poll_tx_cq;
+		cq->timer.data = (unsigned long) cq;
+	} else {
+		netif_napi_add(cq->dev, &cq->napi, mlx4_en_poll_rx_cq, 64);
+		napi_enable(&cq->napi);
+	}
+
+	return 0;
+}
+
+void mlx4_en_destroy_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+
+	mlx4_en_unmap_buffer(&cq->wqres.buf);
+	mlx4_free_hwq_res(mdev->dev, &cq->wqres, cq->buf_size);
+	cq->buf_size = 0;
+	cq->buf = NULL;
+}
+
+void mlx4_en_deactivate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+
+	if (cq->is_tx)
+		del_timer(&cq->timer);
+	else
+		napi_disable(&cq->napi);
+
+	mlx4_cq_free(mdev->dev, &cq->mcq);
+}
+
+/* Set rx cq moderation parameters */
+int mlx4_en_set_cq_moder(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq)
+{
+	return mlx4_cq_modify(priv->mdev->dev, &cq->mcq,
+			      cq->moder_cnt, cq->moder_time);
+}
+
+int mlx4_en_arm_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq)
+{
+	cq->armed = 1;
+	mlx4_cq_arm(&cq->mcq, MLX4_CQ_DB_REQ_NOT, priv->mdev->uar_map,
+		    &priv->mdev->uar_lock);
+
+	return 0;
+}
+
+
diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c
new file mode 100644
index 0000000..1b0eebf
--- /dev/null
+++ b/drivers/net/mlx4/en_main.c
@@ -0,0 +1,254 @@
+/*
+ * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/cpumask.h>
+
+#include <linux/mlx4/driver.h>
+#include <linux/mlx4/device.h>
+#include <linux/mlx4/cmd.h>
+
+#include "mlx4_en.h"
+
+MODULE_AUTHOR("Liran Liss, Yevgeny Petrilin");
+MODULE_DESCRIPTION("Mellanox ConnectX HCA Ethernet driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_VERSION(DRV_VERSION " ("DRV_RELDATE")");
+
+static const char mlx4_en_version[] =
+	DRV_NAME ": Mellanox ConnectX HCA Ethernet driver v"
+	DRV_VERSION " (" DRV_RELDATE ")\n";
+
+static void mlx4_en_event(struct mlx4_dev *dev, void *endev_ptr,
+			  enum mlx4_dev_event event, int port)
+{
+	struct mlx4_en_dev *mdev = (struct mlx4_en_dev *) endev_ptr;
+	struct mlx4_en_priv *priv;
+
+	if (!mdev->pndev[port])
+		return;
+
+	priv = netdev_priv(mdev->pndev[port]);
+	switch (event) {
+	case MLX4_DEV_EVENT_PORT_UP:
+	case MLX4_DEV_EVENT_PORT_DOWN:
+		/* To prevent races, we poll the link state in a separate
+		  task rather than changing it here */
+		priv->link_state = event;
+		queue_work(mdev->workqueue, &priv->linkstate_task);
+		break;
+
+	case MLX4_DEV_EVENT_CATASTROPHIC_ERROR:
+		mlx4_err(mdev, "Internal error detected, restarting device\n");
+		break;
+
+	default:
+		mlx4_warn(mdev, "Unhandled event: %d\n", event);
+	}
+}
+
+static void mlx4_en_remove(struct mlx4_dev *dev, void *endev_ptr)
+{
+	struct mlx4_en_dev *mdev = endev_ptr;
+	int i;
+
+	mutex_lock(&mdev->state_lock);
+	mdev->device_up = false;
+	mutex_unlock(&mdev->state_lock);
+
+	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
+		if (mdev->pndev[i])
+			mlx4_en_destroy_netdev(mdev->pndev[i]);
+
+	flush_workqueue(mdev->workqueue);
+	destroy_workqueue(mdev->workqueue);
+	mlx4_mr_free(dev, &mdev->mr);
+	mlx4_uar_free(dev, &mdev->priv_uar);
+	mlx4_pd_free(dev, mdev->priv_pdn);
+	kfree(mdev);
+}
+
+static void *mlx4_en_add(struct mlx4_dev *dev)
+{
+	static int mlx4_en_version_printed;
+	struct mlx4_en_dev *mdev;
+	int i;
+	int err;
+
+	if (!mlx4_en_version_printed) {
+		printk(KERN_INFO "%s", mlx4_en_version);
+		mlx4_en_version_printed++;
+	}
+
+	mdev = kzalloc(sizeof *mdev, GFP_KERNEL);
+	if (!mdev) {
+		dev_err(&dev->pdev->dev, "Device struct alloc failed, "
+			"aborting.\n");
+		err = -ENOMEM;
+		goto err_free_res;
+	}
+
+	if (mlx4_pd_alloc(dev, &mdev->priv_pdn))
+		goto err_free_dev;
+
+	if (mlx4_uar_alloc(dev, &mdev->priv_uar))
+		goto err_pd;
+
+	mdev->uar_map = ioremap(mdev->priv_uar.pfn << PAGE_SHIFT, PAGE_SIZE);
+	if (!mdev->uar_map)
+		goto err_uar;
+	spin_lock_init(&mdev->uar_lock);
+
+	mdev->dev = dev;
+	mdev->dma_device = &(dev->pdev->dev);
+	mdev->pdev = dev->pdev;
+	mdev->device_up = false;
+
+	mdev->LSO_support = !!(dev->caps.flags & (1 << 15));
+	if (!mdev->LSO_support)
+		mlx4_warn(mdev, "LSO not supported, please upgrade to later "
+				"FW version to enable LSO\n");
+
+	if (mlx4_mr_alloc(mdev->dev, mdev->priv_pdn, 0, ~0ull,
+			 MLX4_PERM_LOCAL_WRITE |  MLX4_PERM_LOCAL_READ,
+			 0, 0, &mdev->mr)) {
+		mlx4_err(mdev, "Failed allocating memory region\n");
+		goto err_uar;
+	}
+	if (mlx4_mr_enable(mdev->dev, &mdev->mr)) {
+		mlx4_err(mdev, "Failed enabling memory region\n");
+		goto err_mr;
+	}
+
+	/* Build device profile according to supplied module parameters */
+	err = mlx4_en_get_profile(mdev);
+	if (err) {
+		mlx4_err(mdev, "Bad module parameters, aborting.\n");
+		goto err_mr;
+	}
+
+	/* Configure wich ports to start according to module parameters */
+	mdev->port_cnt = 0;
+	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
+		mdev->port_cnt++;
+
+	/* If we did not receive an explicit number of Rx rings, default to
+	 * the number of completion vectors populated by the mlx4_core */
+	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
+		mlx4_info(mdev, "Using %d tx rings for port:%d\n",
+			  mdev->profile.prof[i].tx_ring_num, i);
+		if (!mdev->profile.prof[i].rx_ring_num) {
+			mdev->profile.prof[i].rx_ring_num = 1;
+			mlx4_info(mdev, "Defaulting to %d rx rings for port:%d\n",
+				  1, i);
+		} else
+			mlx4_info(mdev, "Using %d rx rings for port:%d\n",
+				  mdev->profile.prof[i].rx_ring_num, i);
+	}
+
+	/* Create our own workqueue for reset/multicast tasks
+	 * Note: we cannot use the shared workqueue because of deadlocks caused
+	 *       by the rtnl lock */
+	mdev->workqueue = create_singlethread_workqueue("mlx4_en");
+	if (!mdev->workqueue) {
+		err = -ENOMEM;
+		goto err_close_nic;
+	}
+
+	/* At this stage all non-port specific tasks are complete:
+	 * mark the card state as up */
+	mutex_init(&mdev->state_lock);
+	mdev->device_up = true;
+
+	/* Setup ports */
+
+	/* Create a netdev for each port */
+	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
+		mlx4_info(mdev, "Activating port:%d\n", i);
+		if (mlx4_en_init_netdev(mdev, i, &mdev->profile.prof[i])) {
+			mdev->pndev[i] = NULL;
+			goto err_free_netdev;
+		}
+	}
+	return mdev;
+
+
+err_free_netdev:
+	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
+		if (mdev->pndev[i])
+			mlx4_en_destroy_netdev(mdev->pndev[i]);
+	}
+
+	mutex_lock(&mdev->state_lock);
+	mdev->device_up = false;
+	mutex_unlock(&mdev->state_lock);
+	flush_workqueue(mdev->workqueue);
+
+	/* Stop event queue before we drop down to release shared SW state */
+
+err_close_nic:
+	destroy_workqueue(mdev->workqueue);
+err_mr:
+	mlx4_mr_free(dev, &mdev->mr);
+err_uar:
+	mlx4_uar_free(dev, &mdev->priv_uar);
+err_pd:
+	mlx4_pd_free(dev, mdev->priv_pdn);
+err_free_dev:
+	kfree(mdev);
+err_free_res:
+	return NULL;
+}
+
+static struct mlx4_interface mlx4_en_interface = {
+	.add	= mlx4_en_add,
+	.remove	= mlx4_en_remove,
+	.event	= mlx4_en_event,
+};
+
+static int __init mlx4_en_init(void)
+{
+	return mlx4_register_interface(&mlx4_en_interface);
+}
+
+static void __exit mlx4_en_cleanup(void)
+{
+	mlx4_unregister_interface(&mlx4_en_interface);
+}
+
+module_init(mlx4_en_init);
+module_exit(mlx4_en_cleanup);
+
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
new file mode 100644
index 0000000..a339afb
--- /dev/null
+++ b/drivers/net/mlx4/en_netdev.c
@@ -0,0 +1,1088 @@
+/*
+ * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/tcp.h>
+#include <linux/if_vlan.h>
+#include <linux/delay.h>
+
+#include <linux/mlx4/driver.h>
+#include <linux/mlx4/device.h>
+#include <linux/mlx4/cmd.h>
+#include <linux/mlx4/cq.h>
+
+#include "mlx4_en.h"
+#include "en_port.h"
+
+
+static void mlx4_en_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int err;
+
+	mlx4_dbg(HW, priv, "Registering VLAN group:%p\n", grp);
+	priv->vlgrp = grp;
+
+	mutex_lock(&mdev->state_lock);
+	if (mdev->device_up && priv->port_up) {
+		err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, grp);
+		if (err)
+			mlx4_err(mdev, "Failed configuring VLAN filter\n");
+	}
+	mutex_unlock(&mdev->state_lock);
+}
+
+static void mlx4_en_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int err;
+
+	if (!priv->vlgrp)
+		return;
+
+	mlx4_dbg(HW, priv, "adding VLAN:%d (vlgrp entry:%p)\n",
+		 vid, vlan_group_get_device(priv->vlgrp, vid));
+
+	/* Add VID to port VLAN filter */
+	mutex_lock(&mdev->state_lock);
+	if (mdev->device_up && priv->port_up) {
+		err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, priv->vlgrp);
+		if (err)
+			mlx4_err(mdev, "Failed configuring VLAN filter\n");
+	}
+	mutex_unlock(&mdev->state_lock);
+}
+
+static void mlx4_en_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int err;
+
+	if (!priv->vlgrp)
+		return;
+
+	mlx4_dbg(HW, priv, "Killing VID:%d (vlgrp:%p vlgrp "
+		 "entry:%p)\n", vid, priv->vlgrp,
+		 vlan_group_get_device(priv->vlgrp, vid));
+	vlan_group_set_device(priv->vlgrp, vid, NULL);
+
+	/* Remove VID from port VLAN filter */
+	mutex_lock(&mdev->state_lock);
+	if (mdev->device_up && priv->port_up) {
+		err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, priv->vlgrp);
+		if (err)
+			mlx4_err(mdev, "Failed configuring VLAN filter\n");
+	}
+	mutex_unlock(&mdev->state_lock);
+}
+
+static u64 mlx4_en_mac_to_u64(u8 *addr)
+{
+	u64 mac = 0;
+	int i;
+
+	for (i = 0; i < ETH_ALEN; i++) {
+		mac <<= 8;
+		mac |= addr[i];
+	}
+	return mac;
+}
+
+static int mlx4_en_set_mac(struct net_device *dev, void *addr)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct sockaddr *saddr = addr;
+
+	if (!is_valid_ether_addr(saddr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(dev->dev_addr, saddr->sa_data, ETH_ALEN);
+	priv->mac = mlx4_en_mac_to_u64(dev->dev_addr);
+	queue_work(mdev->workqueue, &priv->mac_task);
+	return 0;
+}
+
+static void mlx4_en_do_set_mac(struct work_struct *work)
+{
+	struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv,
+						 mac_task);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int err = 0;
+
+	mutex_lock(&mdev->state_lock);
+	if (priv->port_up) {
+		/* Remove old MAC and insert the new one */
+		mlx4_unregister_mac(mdev->dev, priv->port, priv->mac_index);
+		err = mlx4_register_mac(mdev->dev, priv->port,
+					priv->mac, &priv->mac_index);
+		if (err)
+			mlx4_err(mdev, "Failed changing HW MAC address\n");
+	} else
+		mlx4_dbg(HW, priv, "Port is down, exiting...\n");
+
+	mutex_unlock(&mdev->state_lock);
+}
+
+static void mlx4_en_clear_list(struct net_device *dev)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct dev_mc_list *plist = priv->mc_list;
+	struct dev_mc_list *next;
+
+	while (plist) {
+		next = plist->next;
+		kfree(plist);
+		plist = next;
+	}
+	priv->mc_list = NULL;
+}
+
+static void mlx4_en_cache_mclist(struct net_device *dev)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct dev_mc_list *mclist;
+	struct dev_mc_list *tmp;
+	struct dev_mc_list *plist = NULL;
+
+	for (mclist = dev->mc_list; mclist; mclist = mclist->next) {
+		tmp = kmalloc(sizeof(struct dev_mc_list), GFP_ATOMIC);
+		if (!tmp) {
+			mlx4_err(mdev, "failed to allocate multicast list\n");
+			mlx4_en_clear_list(dev);
+			return;
+		}
+		memcpy(tmp, mclist, sizeof(struct dev_mc_list));
+		tmp->next = NULL;
+		if (plist)
+			plist->next = tmp;
+		else
+			priv->mc_list = tmp;
+		plist = tmp;
+	}
+}
+
+
+static void mlx4_en_set_multicast(struct net_device *dev)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+
+	if (!priv->port_up)
+		return;
+
+	queue_work(priv->mdev->workqueue, &priv->mcast_task);
+}
+
+static void mlx4_en_do_set_multicast(struct work_struct *work)
+{
+	struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv,
+						 mcast_task);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct net_device *dev = priv->dev;
+	struct dev_mc_list *mclist;
+	u64 mcast_addr = 0;
+	int err;
+
+	mutex_lock(&mdev->state_lock);
+	if (!mdev->device_up) {
+		mlx4_dbg(HW, priv, "Card is not up, ignoring "
+				   "multicast change.\n");
+		goto out;
+	}
+	if (!priv->port_up) {
+		mlx4_dbg(HW, priv, "Port is down, ignoring "
+				   "multicast change.\n");
+		goto out;
+	}
+
+	/*
+	 * Promsicuous mode: disable all filters
+	 */
+
+	if (dev->flags & IFF_PROMISC) {
+		if (!(priv->flags & MLX4_EN_FLAG_PROMISC)) {
+			if (netif_msg_rx_status(priv))
+				mlx4_warn(mdev, "Port:%d entering promiscuous mode\n",
+					  priv->port);
+			priv->flags |= MLX4_EN_FLAG_PROMISC;
+
+			/* Enable promiscouos mode */
+			err = mlx4_SET_PORT_qpn_calc(mdev->dev, priv->port,
+						     priv->base_qpn, 1);
+			if (err)
+				mlx4_err(mdev, "Failed enabling "
+					 "promiscous mode\n");
+
+			/* Disable port multicast filter (unconditionally) */
+			err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0,
+						  0, MLX4_MCAST_DISABLE);
+			if (err)
+				mlx4_err(mdev, "Failed disabling "
+					 "multicast filter\n");
+
+			/* Disable port VLAN filter */
+			err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, NULL);
+			if (err)
+				mlx4_err(mdev, "Failed disabling "
+					 "VLAN filter\n");
+		}
+		goto out;
+	}
+
+	/*
+	 * Not in promiscous mode
+	 */
+
+	if (priv->flags & MLX4_EN_FLAG_PROMISC) {
+		if (netif_msg_rx_status(priv))
+			mlx4_warn(mdev, "Port:%d leaving promiscuous mode\n",
+				  priv->port);
+		priv->flags &= ~MLX4_EN_FLAG_PROMISC;
+
+		/* Disable promiscouos mode */
+		err = mlx4_SET_PORT_qpn_calc(mdev->dev, priv->port,
+					     priv->base_qpn, 0);
+		if (err)
+			mlx4_err(mdev, "Failed disabling promiscous mode\n");
+
+		/* Enable port VLAN filter */
+		err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, priv->vlgrp);
+		if (err)
+			mlx4_err(mdev, "Failed enabling VLAN filter\n");
+	}
+
+	/* Enable/disable the multicast filter according to IFF_ALLMULTI */
+	if (dev->flags & IFF_ALLMULTI) {
+		err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0,
+					  0, MLX4_MCAST_DISABLE);
+		if (err)
+			mlx4_err(mdev, "Failed disabling multicast filter\n");
+	} else {
+		err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0,
+					  0, MLX4_MCAST_DISABLE);
+		if (err)
+			mlx4_err(mdev, "Failed disabling multicast filter\n");
+
+		/* Flush mcast filter and init it with broadcast address */
+		mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, ETH_BCAST,
+				    1, MLX4_MCAST_CONFIG);
+
+		/* Update multicast list - we cache all addresses so they won't
+		 * change while HW is updated holding the command semaphor */
+		netif_tx_lock_bh(dev);
+		mlx4_en_cache_mclist(dev);
+		netif_tx_unlock_bh(dev);
+		for (mclist = priv->mc_list; mclist; mclist = mclist->next) {
+			mcast_addr = mlx4_en_mac_to_u64(mclist->dmi_addr);
+			mlx4_SET_MCAST_FLTR(mdev->dev, priv->port,
+					    mcast_addr, 0, MLX4_MCAST_CONFIG);
+		}
+		err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0,
+					  0, MLX4_MCAST_ENABLE);
+		if (err)
+			mlx4_err(mdev, "Failed enabling multicast filter\n");
+
+		mlx4_en_clear_list(dev);
+	}
+out:
+	mutex_unlock(&mdev->state_lock);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void mlx4_en_netpoll(struct net_device *dev)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_cq *cq;
+	unsigned long flags;
+	int i;
+
+	for (i = 0; i < priv->rx_ring_num; i++) {
+		cq = &priv->rx_cq[i];
+		spin_lock_irqsave(&cq->lock, flags);
+		napi_synchronize(&cq->napi);
+		mlx4_en_process_rx_cq(dev, cq, 0);
+		spin_unlock_irqrestore(&cq->lock, flags);
+	}
+}
+#endif
+
+static void mlx4_en_tx_timeout(struct net_device *dev)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+
+	if (netif_msg_timer(priv))
+		mlx4_warn(mdev, "Tx timeout called on port:%d\n", priv->port);
+
+	if (netif_carrier_ok(dev)) {
+		priv->port_stats.tx_timeout++;
+		mlx4_dbg(DRV, priv, "Scheduling watchdog\n");
+		queue_work(mdev->workqueue, &priv->watchdog_task);
+	}
+}
+
+
+static struct net_device_stats *mlx4_en_get_stats(struct net_device *dev)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+
+	spin_lock_bh(&priv->stats_lock);
+	memcpy(&priv->ret_stats, &priv->stats, sizeof(priv->stats));
+	spin_unlock_bh(&priv->stats_lock);
+
+	return &priv->ret_stats;
+}
+
+static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct mlx4_en_cq *cq;
+	int i;
+
+	/* If we haven't received a specific coalescing setting
+	 * (module param), we set the moderation paramters as follows:
+	 * - moder_cnt is set to the number of mtu sized packets to
+	 *   satisfy our coelsing target.
+	 * - moder_time is set to a fixed value.
+	 */
+	priv->rx_frames = (mdev->profile.rx_moder_cnt ==
+			   MLX4_EN_AUTO_CONF) ?
+				MLX4_EN_RX_COAL_TARGET /
+				priv->dev->mtu + 1 :
+				mdev->profile.rx_moder_cnt;
+	priv->rx_usecs = (mdev->profile.rx_moder_time ==
+			  MLX4_EN_AUTO_CONF) ?
+				MLX4_EN_RX_COAL_TIME :
+				mdev->profile.rx_moder_time;
+	mlx4_dbg(INTR, priv, "Default coalesing params for mtu:%d - "
+			     "rx_frames:%d rx_usecs:%d\n",
+		 priv->dev->mtu, priv->rx_frames, priv->rx_usecs);
+
+	/* Setup cq moderation params */
+	for (i = 0; i < priv->rx_ring_num; i++) {
+		cq = &priv->rx_cq[i];
+		cq->moder_cnt = priv->rx_frames;
+		cq->moder_time = priv->rx_usecs;
+	}
+
+	for (i = 0; i < priv->tx_ring_num; i++) {
+		cq = &priv->tx_cq[i];
+		cq->moder_cnt = MLX4_EN_TX_COAL_PKTS;
+		cq->moder_time = MLX4_EN_TX_COAL_TIME;
+	}
+
+	/* Reset auto-moderation params */
+	priv->pkt_rate_low = MLX4_EN_RX_RATE_LOW;
+	priv->rx_usecs_low = MLX4_EN_RX_COAL_TIME_LOW;
+	priv->pkt_rate_high = MLX4_EN_RX_RATE_HIGH;
+	priv->rx_usecs_high = MLX4_EN_RX_COAL_TIME_HIGH;
+	priv->sample_interval = MLX4_EN_SAMPLE_INTERVAL;
+	priv->adaptive_rx_coal = mdev->profile.auto_moder;
+	priv->last_moder_time = MLX4_EN_AUTO_CONF;
+	priv->last_moder_jiffies = 0;
+	priv->last_moder_packets = 0;
+	priv->last_moder_tx_packets = 0;
+	priv->last_moder_bytes = 0;
+}
+
+static void mlx4_en_auto_moderation(struct mlx4_en_priv *priv)
+{
+	unsigned long period = (unsigned long) (jiffies - priv->last_moder_jiffies);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct mlx4_en_cq *cq;
+	unsigned long packets;
+	unsigned long rate;
+	unsigned long avg_pkt_size;
+	unsigned long rx_packets;
+	unsigned long rx_bytes;
+	unsigned long tx_packets;
+	unsigned long tx_pkt_diff;
+	unsigned long rx_pkt_diff;
+	int moder_time;
+	int i, err;
+
+	if (!priv->adaptive_rx_coal || period < priv->sample_interval * HZ)
+		return;
+
+	spin_lock_bh(&priv->stats_lock);
+	rx_packets = priv->stats.rx_packets;
+	rx_bytes = priv->stats.rx_bytes;
+	tx_packets = priv->stats.tx_packets;
+	spin_unlock_bh(&priv->stats_lock);
+
+	if (!priv->last_moder_jiffies || !period)
+		goto out;
+
+	tx_pkt_diff = ((unsigned long) (tx_packets -
+					priv->last_moder_tx_packets));
+	rx_pkt_diff = ((unsigned long) (rx_packets -
+					priv->last_moder_packets));
+	packets = max(tx_pkt_diff, rx_pkt_diff);
+	rate = packets * HZ / period;
+	avg_pkt_size = packets ? ((unsigned long) (rx_bytes -
+				 priv->last_moder_bytes)) / packets : 0;
+
+	/* Apply auto-moderation only when packet rate exceeds a rate that
+	 * it matters */
+	if (rate > MLX4_EN_RX_RATE_THRESH) {
+		/* If tx and rx packet rates are not balanced, assume that
+		 * traffic is mainly BW bound and apply maximum moderation.
+		 * Otherwise, moderate according to packet rate */
+		if (2 * tx_pkt_diff > 3 * rx_pkt_diff ||
+		    2 * rx_pkt_diff > 3 * tx_pkt_diff) {
+			moder_time = priv->rx_usecs_high;
+		} else {
+			if (rate < priv->pkt_rate_low)
+				moder_time = priv->rx_usecs_low;
+			else if (rate > priv->pkt_rate_high)
+				moder_time = priv->rx_usecs_high;
+			else
+				moder_time = (rate - priv->pkt_rate_low) *
+					(priv->rx_usecs_high - priv->rx_usecs_low) /
+					(priv->pkt_rate_high - priv->pkt_rate_low) +
+					priv->rx_usecs_low;
+		}
+	} else {
+		/* When packet rate is low, use default moderation rather than
+		 * 0 to prevent interrupt storms if traffic suddenly increases */
+		moder_time = priv->rx_usecs;
+	}
+
+	mlx4_dbg(INTR, priv, "tx rate:%lu rx_rate:%lu\n",
+		 tx_pkt_diff * HZ / period, rx_pkt_diff * HZ / period);
+
+	mlx4_dbg(INTR, priv, "Rx moder_time changed from:%d to %d period:%lu "
+		 "[jiff] packets:%lu avg_pkt_size:%lu rate:%lu [p/s])\n",
+		 priv->last_moder_time, moder_time, period, packets,
+		 avg_pkt_size, rate);
+
+	if (moder_time != priv->last_moder_time) {
+		priv->last_moder_time = moder_time;
+		for (i = 0; i < priv->rx_ring_num; i++) {
+			cq = &priv->rx_cq[i];
+			cq->moder_time = moder_time;
+			err = mlx4_en_set_cq_moder(priv, cq);
+			if (err) {
+				mlx4_err(mdev, "Failed modifying moderation for cq:%d "
+					 "on port:%d\n", i, priv->port);
+				break;
+			}
+		}
+	}
+
+out:
+	priv->last_moder_packets = rx_packets;
+	priv->last_moder_tx_packets = tx_packets;
+	priv->last_moder_bytes = rx_bytes;
+	priv->last_moder_jiffies = jiffies;
+}
+
+static void mlx4_en_do_get_stats(struct work_struct *work)
+{
+	struct delayed_work *delay = container_of(work, struct delayed_work, work);
+	struct mlx4_en_priv *priv = container_of(delay, struct mlx4_en_priv,
+						 stats_task);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int err;
+
+	err = mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 0);
+	if (err)
+		mlx4_dbg(HW, priv, "Could not update stats for "
+				   "port:%d\n", priv->port);
+
+	mutex_lock(&mdev->state_lock);
+	if (mdev->device_up) {
+		if (priv->port_up)
+			mlx4_en_auto_moderation(priv);
+
+		queue_delayed_work(mdev->workqueue, &priv->stats_task, STATS_DELAY);
+	}
+	mutex_unlock(&mdev->state_lock);
+}
+
+static void mlx4_en_linkstate(struct work_struct *work)
+{
+	struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv,
+						 linkstate_task);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int linkstate = priv->link_state;
+
+	mutex_lock(&mdev->state_lock);
+	/* If observable port state changed set carrier state and
+	 * report to system log */
+	if (priv->last_link_state != linkstate) {
+		if (linkstate == MLX4_DEV_EVENT_PORT_DOWN) {
+			if (netif_msg_link(priv))
+				mlx4_info(mdev, "Port %d - link down\n", priv->port);
+			netif_carrier_off(priv->dev);
+		} else {
+			if (netif_msg_link(priv))
+				mlx4_info(mdev, "Port %d - link up\n", priv->port);
+			netif_carrier_on(priv->dev);
+		}
+	}
+	priv->last_link_state = linkstate;
+	mutex_unlock(&mdev->state_lock);
+}
+
+
+static int mlx4_en_start_port(struct net_device *dev)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct mlx4_en_cq *cq;
+	struct mlx4_en_tx_ring *tx_ring;
+	struct mlx4_en_rx_ring *rx_ring;
+	int rx_index = 0;
+	int tx_index = 0;
+	u16 stride;
+	int err = 0;
+	int i;
+	int j;
+
+	if (priv->port_up) {
+		mlx4_dbg(DRV, priv, "start port called while port already up\n");
+		return 0;
+	}
+
+	/* Calculate Rx buf size */
+	dev->mtu = min(dev->mtu, priv->max_mtu);
+	mlx4_en_calc_rx_buf(dev);
+	mlx4_dbg(DRV, priv, "Rx buf size:%d\n", priv->rx_skb_size);
+	stride = roundup_pow_of_two(sizeof(struct mlx4_en_rx_desc) +
+				    DS_SIZE * priv->num_frags);
+	/* Configure rx cq's and rings */
+	for (i = 0; i < priv->rx_ring_num; i++) {
+		cq = &priv->rx_cq[i];
+		rx_ring = &priv->rx_ring[i];
+
+		err = mlx4_en_activate_cq(priv, cq);
+		if (err) {
+			mlx4_err(mdev, "Failed activating Rx CQ\n");
+			goto rx_err;
+		}
+		for (j = 0; j < cq->size; j++)
+			cq->buf[j].owner_sr_opcode = MLX4_CQE_OWNER_MASK;
+		err = mlx4_en_set_cq_moder(priv, cq);
+		if (err) {
+			mlx4_err(mdev, "Failed setting cq moderation parameters");
+			mlx4_en_deactivate_cq(priv, cq);
+			goto cq_err;
+		}
+		mlx4_en_arm_cq(priv, cq);
+
+		++rx_index;
+	}
+
+	err = mlx4_en_activate_rx_rings(priv);
+	if (err) {
+		mlx4_err(mdev, "Failed to activate RX rings\n");
+		goto cq_err;
+	}
+
+	err = mlx4_en_config_rss_steer(priv);
+	if (err) {
+		mlx4_err(mdev, "Failed configuring rss steering\n");
+		goto rx_err;
+	}
+
+	/* Configure tx cq's and rings */
+	for (i = 0; i < priv->tx_ring_num; i++) {
+		/* Configure cq */
+		cq = &priv->tx_cq[i];
+		err = mlx4_en_activate_cq(priv, cq);
+		if (err) {
+			mlx4_err(mdev, "Failed allocating Tx CQ\n");
+			goto tx_err;
+		}
+		err = mlx4_en_set_cq_moder(priv, cq);
+		if (err) {
+			mlx4_err(mdev, "Failed setting cq moderation parameters");
+			mlx4_en_deactivate_cq(priv, cq);
+			goto tx_err;
+		}
+		mlx4_dbg(DRV, priv, "Resetting index of collapsed CQ:%d to -1\n", i);
+		cq->buf->wqe_index = cpu_to_be16(0xffff);
+
+		/* Configure ring */
+		tx_ring = &priv->tx_ring[i];
+		err = mlx4_en_activate_tx_ring(priv, tx_ring, cq->mcq.cqn,
+					       priv->rx_ring[0].srq.srqn);
+		if (err) {
+			mlx4_err(mdev, "Failed allocating Tx ring\n");
+			mlx4_en_deactivate_cq(priv, cq);
+			goto tx_err;
+		}
+		/* Set initial ownership of all Tx TXBBs to SW (1) */
+		for (j = 0; j < tx_ring->buf_size; j += STAMP_STRIDE)
+			*((u32 *) (tx_ring->buf + j)) = 0xffffffff;
+		++tx_index;
+	}
+
+	/* Configure port */
+	err = mlx4_SET_PORT_general(mdev->dev, priv->port,
+				    priv->rx_skb_size + ETH_FCS_LEN,
+				    mdev->profile.tx_pause,
+				    mdev->profile.tx_ppp,
+				    mdev->profile.rx_pause,
+				    mdev->profile.rx_ppp);
+	if (err) {
+		mlx4_err(mdev, "Failed setting port general configurations"
+			       " for port %d, with error %d\n", priv->port, err);
+		goto tx_err;
+	}
+	/* Set default qp number */
+	err = mlx4_SET_PORT_qpn_calc(mdev->dev, priv->port, priv->base_qpn, 0);
+	if (err) {
+		mlx4_err(mdev, "Failed setting default qp numbers\n");
+		goto tx_err;
+	}
+	/* Set port mac number */
+	mlx4_dbg(DRV, priv, "Setting mac for port %d\n", priv->port);
+	err = mlx4_register_mac(mdev->dev, priv->port,
+				priv->mac, &priv->mac_index);
+	if (err) {
+		mlx4_err(mdev, "Failed setting port mac\n");
+		goto tx_err;
+	}
+
+	/* Init port */
+	mlx4_dbg(HW, priv, "Initializing port\n");
+	err = mlx4_INIT_PORT(mdev->dev, priv->port);
+	if (err) {
+		mlx4_err(mdev, "Failed Initializing port\n");
+		goto mac_err;
+	}
+
+	/* Schedule multicast task to populate multicast list */
+	queue_work(mdev->workqueue, &priv->mcast_task);
+
+	priv->port_up = true;
+	netif_start_queue(dev);
+	return 0;
+
+mac_err:
+	mlx4_unregister_mac(mdev->dev, priv->port, priv->mac_index);
+tx_err:
+	while (tx_index--) {
+		mlx4_en_deactivate_tx_ring(priv, &priv->tx_ring[tx_index]);
+		mlx4_en_deactivate_cq(priv, &priv->tx_cq[tx_index]);
+	}
+
+	mlx4_en_release_rss_steer(priv);
+rx_err:
+	for (i = 0; i < priv->rx_ring_num; i++)
+		mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[rx_index]);
+cq_err:
+	while (rx_index--)
+		mlx4_en_deactivate_cq(priv, &priv->rx_cq[rx_index]);
+
+	return err; /* need to close devices */
+}
+
+
+static void mlx4_en_stop_port(struct net_device *dev)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int i;
+
+	if (!priv->port_up) {
+		mlx4_dbg(DRV, priv, "stop port (%d) called while port already down\n",
+			 priv->port);
+		return;
+	}
+	netif_stop_queue(dev);
+
+	/* Synchronize with tx routine */
+	netif_tx_lock_bh(dev);
+	priv->port_up = false;
+	netif_tx_unlock_bh(dev);
+
+	/* close port*/
+	mlx4_CLOSE_PORT(mdev->dev, priv->port);
+
+	/* Unregister Mac address for the port */
+	mlx4_unregister_mac(mdev->dev, priv->port, priv->mac_index);
+
+	/* Free TX Rings */
+	for (i = 0; i < priv->tx_ring_num; i++) {
+		mlx4_en_deactivate_tx_ring(priv, &priv->tx_ring[i]);
+		mlx4_en_deactivate_cq(priv, &priv->tx_cq[i]);
+	}
+	msleep(10);
+
+	for (i = 0; i < priv->tx_ring_num; i++)
+		mlx4_en_free_tx_buf(dev, &priv->tx_ring[i]);
+
+	/* Free RSS qps */
+	mlx4_en_release_rss_steer(priv);
+
+	/* Free RX Rings */
+	for (i = 0; i < priv->rx_ring_num; i++) {
+		mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]);
+		while (test_bit(NAPI_STATE_SCHED, &priv->rx_cq[i].napi.state))
+			msleep(1);
+		mlx4_en_deactivate_cq(priv, &priv->rx_cq[i]);
+	}
+}
+
+static void mlx4_en_restart(struct work_struct *work)
+{
+	struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv,
+						 watchdog_task);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct net_device *dev = priv->dev;
+
+	mlx4_dbg(DRV, priv, "Watchdog task called for port %d\n", priv->port);
+	mlx4_en_stop_port(dev);
+	if (mlx4_en_start_port(dev))
+	    mlx4_err(mdev, "Failed restarting port %d\n", priv->port);
+}
+
+
+static int mlx4_en_open(struct net_device *dev)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int i;
+	int err = 0;
+
+	mutex_lock(&mdev->state_lock);
+
+	if (!mdev->device_up) {
+		mlx4_err(mdev, "Cannot open - device down/disabled\n");
+		err = -EBUSY;
+		goto out;
+	}
+
+	/* Reset HW statistics and performance counters */
+	if (mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 1))
+		mlx4_dbg(HW, priv, "Failed dumping statistics\n");
+
+	memset(&priv->stats, 0, sizeof(priv->stats));
+	memset(&priv->pstats, 0, sizeof(priv->pstats));
+
+	for (i = 0; i < priv->tx_ring_num; i++) {
+		priv->tx_ring[i].bytes = 0;
+		priv->tx_ring[i].packets = 0;
+	}
+	for (i = 0; i < priv->rx_ring_num; i++) {
+		priv->rx_ring[i].bytes = 0;
+		priv->rx_ring[i].packets = 0;
+	}
+
+	mlx4_en_set_default_moderation(priv);
+	err = mlx4_en_start_port(dev);
+	if (err)
+		mlx4_err(mdev, "Failed starting port:%d\n", priv->port);
+
+out:
+	mutex_unlock(&mdev->state_lock);
+	return err;
+}
+
+
+static int mlx4_en_close(struct net_device *dev)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+
+	if (netif_msg_ifdown(priv))
+		mlx4_info(mdev, "Close called for port:%d\n", priv->port);
+
+	mutex_lock(&mdev->state_lock);
+
+	mlx4_en_stop_port(dev);
+	netif_carrier_off(dev);
+
+	mutex_unlock(&mdev->state_lock);
+	return 0;
+}
+
+static void mlx4_en_free_resources(struct mlx4_en_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < priv->tx_ring_num; i++) {
+		if (priv->tx_ring[i].tx_info)
+			mlx4_en_destroy_tx_ring(priv, &priv->tx_ring[i]);
+		if (priv->tx_cq[i].buf)
+			mlx4_en_destroy_cq(priv, &priv->tx_cq[i]);
+	}
+
+	for (i = 0; i < priv->rx_ring_num; i++) {
+		if (priv->rx_ring[i].rx_info)
+			mlx4_en_destroy_rx_ring(priv, &priv->rx_ring[i]);
+		if (priv->rx_cq[i].buf)
+			mlx4_en_destroy_cq(priv, &priv->rx_cq[i]);
+	}
+}
+
+static int mlx4_en_alloc_resources(struct mlx4_en_priv *priv)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct mlx4_en_port_profile *prof = priv->prof;
+	int i;
+
+	/* Create tx Rings */
+	for (i = 0; i < priv->tx_ring_num; i++) {
+		if (mlx4_en_create_cq(priv, &priv->tx_cq[i],
+				      prof->tx_ring_size, i, TX))
+			goto err;
+
+		if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i],
+					   prof->tx_ring_size, TXBB_SIZE))
+			goto err;
+	}
+
+	/* Create rx Rings */
+	for (i = 0; i < priv->rx_ring_num; i++) {
+		if (mlx4_en_create_cq(priv, &priv->rx_cq[i],
+				      prof->rx_ring_size, i, RX))
+			goto err;
+
+		if (mlx4_en_create_rx_ring(priv, &priv->rx_ring[i],
+					   prof->rx_ring_size, priv->stride))
+			goto err;
+	}
+
+	return 0;
+
+err:
+	mlx4_err(mdev, "Failed to allocate NIC resources\n");
+	return -ENOMEM;
+}
+
+
+void mlx4_en_destroy_netdev(struct net_device *dev)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+
+	mlx4_dbg(DRV, priv, "Destroying netdev on port:%d\n", priv->port);
+
+	/* Unregister device - this will close the port if it was up */
+	if (priv->registered)
+		unregister_netdev(dev);
+
+	if (priv->allocated)
+		mlx4_free_hwq_res(mdev->dev, &priv->res, MLX4_EN_PAGE_SIZE);
+
+	cancel_delayed_work(&priv->stats_task);
+	cancel_delayed_work(&priv->refill_task);
+	/* flush any pending task for this netdev */
+	flush_workqueue(mdev->workqueue);
+
+	/* Detach the netdev so tasks would not attempt to access it */
+	mutex_lock(&mdev->state_lock);
+	mdev->pndev[priv->port] = NULL;
+	mutex_unlock(&mdev->state_lock);
+
+	mlx4_en_free_resources(priv);
+	free_netdev(dev);
+}
+
+static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int err = 0;
+
+	mlx4_dbg(DRV, priv, "Change MTU called - current:%d new:%d\n",
+		 dev->mtu, new_mtu);
+
+	if ((new_mtu < MLX4_EN_MIN_MTU) || (new_mtu > priv->max_mtu)) {
+		mlx4_err(mdev, "Bad MTU size:%d.\n", new_mtu);
+		return -EPERM;
+	}
+	dev->mtu = new_mtu;
+
+	if (netif_running(dev)) {
+		mutex_lock(&mdev->state_lock);
+		if (!mdev->device_up) {
+			/* NIC is probably restarting - let watchdog task reset
+			 * the port */
+			mlx4_dbg(DRV, priv, "Change MTU called with card down!?\n");
+		} else {
+			mlx4_en_stop_port(dev);
+			mlx4_en_set_default_moderation(priv);
+			err = mlx4_en_start_port(dev);
+			if (err) {
+				mlx4_err(mdev, "Failed restarting port:%d\n",
+					 priv->port);
+				queue_work(mdev->workqueue, &priv->watchdog_task);
+			}
+		}
+		mutex_unlock(&mdev->state_lock);
+	}
+	return 0;
+}
+
+int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
+			struct mlx4_en_port_profile *prof)
+{
+	struct net_device *dev;
+	struct mlx4_en_priv *priv;
+	int i;
+	int err;
+
+	dev = alloc_etherdev(sizeof(struct mlx4_en_priv));
+	if (dev == NULL) {
+		mlx4_err(mdev, "Net device allocation failed\n");
+		return -ENOMEM;
+	}
+
+	SET_NETDEV_DEV(dev, &mdev->dev->pdev->dev);
+
+	/*
+	 * Initialize driver private data
+	 */
+
+	priv = netdev_priv(dev);
+	memset(priv, 0, sizeof(struct mlx4_en_priv));
+	priv->dev = dev;
+	priv->mdev = mdev;
+	priv->prof = prof;
+	priv->port = port;
+	priv->port_up = false;
+	priv->rx_csum = 1;
+	priv->flags = prof->flags;
+	priv->tx_ring_num = prof->tx_ring_num;
+	priv->rx_ring_num = prof->rx_ring_num;
+	priv->mc_list = NULL;
+	priv->mac_index = -1;
+	priv->msg_enable = MLX4_EN_MSG_LEVEL;
+	spin_lock_init(&priv->stats_lock);
+	INIT_WORK(&priv->mcast_task, mlx4_en_do_set_multicast);
+	INIT_WORK(&priv->mac_task, mlx4_en_do_set_mac);
+	INIT_DELAYED_WORK(&priv->refill_task, mlx4_en_rx_refill);
+	INIT_WORK(&priv->watchdog_task, mlx4_en_restart);
+	INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
+	INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
+
+	/* Query for default mac and max mtu */
+	priv->max_mtu = mdev->dev->caps.eth_mtu_cap[priv->port];
+	priv->mac = mdev->dev->caps.def_mac[priv->port];
+	if (ILLEGAL_MAC(priv->mac)) {
+		mlx4_err(mdev, "Port: %d, invalid mac burned: 0x%llx, quiting\n",
+			 priv->port, priv->mac);
+		err = -EINVAL;
+		goto out;
+	}
+
+	priv->stride = roundup_pow_of_two(sizeof(struct mlx4_en_rx_desc) +
+					  DS_SIZE * MLX4_EN_MAX_RX_FRAGS);
+	err = mlx4_en_alloc_resources(priv);
+	if (err)
+		goto out;
+
+	/* Populate Rx default RSS mappings */
+	mlx4_en_set_default_rss_map(priv, &priv->rss_map, priv->rx_ring_num *
+						RSS_FACTOR, priv->rx_ring_num);
+	/* Allocate page for receive rings */
+	err = mlx4_alloc_hwq_res(mdev->dev, &priv->res,
+				MLX4_EN_PAGE_SIZE, MLX4_EN_PAGE_SIZE);
+	if (err) {
+		mlx4_err(mdev, "Failed to allocate page for rx qps\n");
+		goto out;
+	}
+	priv->allocated = 1;
+
+	/* Populate Tx priority mappings */
+	mlx4_en_set_prio_map(priv, priv->tx_prio_map, prof->tx_ring_num);
+
+	/*
+	 * Initialize netdev entry points
+	 */
+
+	dev->open = &mlx4_en_open;
+	dev->stop = &mlx4_en_close;
+	dev->hard_start_xmit = &mlx4_en_xmit;
+	dev->get_stats = &mlx4_en_get_stats;
+	dev->set_multicast_list = &mlx4_en_set_multicast;
+	dev->set_mac_address = &mlx4_en_set_mac;
+	dev->change_mtu = &mlx4_en_change_mtu;
+	dev->tx_timeout = &mlx4_en_tx_timeout;
+	dev->watchdog_timeo = MLX4_EN_WATCHDOG_TIMEOUT;
+	dev->vlan_rx_register = mlx4_en_vlan_rx_register;
+	dev->vlan_rx_add_vid = mlx4_en_vlan_rx_add_vid;
+	dev->vlan_rx_kill_vid = mlx4_en_vlan_rx_kill_vid;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = mlx4_en_netpoll;
+#endif
+	SET_ETHTOOL_OPS(dev, &mlx4_en_ethtool_ops);
+
+	/* Set defualt MAC */
+	dev->addr_len = ETH_ALEN;
+	for (i = 0; i < ETH_ALEN; i++)
+		dev->dev_addr[ETH_ALEN - 1 - i] =
+		(u8) (priv->mac >> (8 * i));
+
+	/*
+	 * Set driver features
+	 */
+	dev->features |= NETIF_F_SG;
+	dev->features |= NETIF_F_HW_CSUM;
+	dev->features |= NETIF_F_HIGHDMA;
+	dev->features |= NETIF_F_HW_VLAN_TX |
+			 NETIF_F_HW_VLAN_RX |
+			 NETIF_F_HW_VLAN_FILTER;
+	if (mdev->profile.num_lro)
+		dev->features |= NETIF_F_LRO;
+	if (mdev->LSO_support) {
+		dev->features |= NETIF_F_TSO;
+		dev->features |= NETIF_F_TSO6;
+	}
+
+	mdev->pndev[port] = dev;
+
+	netif_carrier_off(dev);
+	err = register_netdev(dev);
+	if (err) {
+		mlx4_err(mdev, "Netdev registration failed\n");
+		goto out;
+	}
+	priv->registered = 1;
+	queue_delayed_work(mdev->workqueue, &priv->stats_task, STATS_DELAY);
+	return 0;
+
+out:
+	mlx4_en_destroy_netdev(dev);
+	return err;
+}
+
diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_params.c
new file mode 100644
index 0000000..c2e69b1
--- /dev/null
+++ b/drivers/net/mlx4/en_params.c
@@ -0,0 +1,480 @@
+/*
+ * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+
+#include "mlx4_en.h"
+#include "en_port.h"
+
+#define MLX4_EN_PARM_INT(X, def_val, desc) \
+	static unsigned int X = def_val;\
+	module_param(X , uint, 0444); \
+	MODULE_PARM_DESC(X, desc);
+
+
+/*
+ * Device scope module parameters
+ */
+
+
+/* Use a XOR rathern than Toeplitz hash function for RSS */
+MLX4_EN_PARM_INT(rss_xor, 0, "Use XOR hash function for RSS");
+
+/* RSS hash type mask - default to <saddr, daddr, sport, dport> */
+MLX4_EN_PARM_INT(rss_mask, 0xf, "RSS hash type bitmask");
+
+/* Number of LRO sessions per Rx ring (rounded up to a power of two) */
+MLX4_EN_PARM_INT(num_lro, MLX4_EN_MAX_LRO_DESCRIPTORS,
+		 "Number of LRO sessions per ring or disabled (0)");
+
+/* Priority pausing */
+MLX4_EN_PARM_INT(pptx, MLX4_EN_DEF_TX_PAUSE,
+		 "Pause policy on TX: 0 never generate pause frames "
+		 "1 generate pause frames according to RX buffer threshold");
+MLX4_EN_PARM_INT(pprx, MLX4_EN_DEF_RX_PAUSE,
+		 "Pause policy on RX: 0 ignore received pause frames "
+		 "1 respect received pause frames");
+MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
+			   " Per priority bit mask");
+MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]."
+			   " Per priority bit mask");
+
+/* Interrupt moderation tunning */
+MLX4_EN_PARM_INT(rx_moder_cnt, MLX4_EN_AUTO_CONF,
+	       "Max coalesced descriptors for Rx interrupt moderation");
+MLX4_EN_PARM_INT(rx_moder_time, MLX4_EN_AUTO_CONF,
+	       "Timeout following last packet for Rx interrupt moderation");
+MLX4_EN_PARM_INT(auto_moder, 1, "Enable dynamic interrupt moderation");
+
+MLX4_EN_PARM_INT(rx_ring_num1, 0, "Number or Rx rings for port 1 (0 = #cores)");
+MLX4_EN_PARM_INT(rx_ring_num2, 0, "Number or Rx rings for port 2 (0 = #cores)");
+
+MLX4_EN_PARM_INT(tx_ring_size1, MLX4_EN_AUTO_CONF, "Tx ring size for port 1");
+MLX4_EN_PARM_INT(tx_ring_size2, MLX4_EN_AUTO_CONF, "Tx ring size for port 2");
+MLX4_EN_PARM_INT(rx_ring_size1, MLX4_EN_AUTO_CONF, "Rx ring size for port 1");
+MLX4_EN_PARM_INT(rx_ring_size2, MLX4_EN_AUTO_CONF, "Rx ring size for port 2");
+
+
+int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
+{
+	struct mlx4_en_profile *params = &mdev->profile;
+
+	params->rx_moder_cnt = min_t(int, rx_moder_cnt, MLX4_EN_AUTO_CONF);
+	params->rx_moder_time = min_t(int, rx_moder_time, MLX4_EN_AUTO_CONF);
+	params->auto_moder = auto_moder;
+	params->rss_xor = (rss_xor != 0);
+	params->rss_mask = rss_mask & 0x1f;
+	params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS);
+	params->rx_pause = pprx;
+	params->rx_ppp = pfcrx;
+	params->tx_pause = pptx;
+	params->tx_ppp = pfctx;
+	if (params->rx_ppp || params->tx_ppp) {
+		params->prof[1].tx_ring_num = MLX4_EN_TX_RING_NUM;
+		params->prof[2].tx_ring_num = MLX4_EN_TX_RING_NUM;
+	} else {
+		params->prof[1].tx_ring_num = 1;
+		params->prof[2].tx_ring_num = 1;
+	}
+	params->prof[1].rx_ring_num = min_t(int, rx_ring_num1, MAX_RX_RINGS);
+	params->prof[2].rx_ring_num = min_t(int, rx_ring_num2, MAX_RX_RINGS);
+
+	if (tx_ring_size1 == MLX4_EN_AUTO_CONF)
+		tx_ring_size1 = MLX4_EN_DEF_TX_RING_SIZE;
+	params->prof[1].tx_ring_size =
+		(tx_ring_size1 < MLX4_EN_MIN_TX_SIZE) ?
+		 MLX4_EN_MIN_TX_SIZE : roundup_pow_of_two(tx_ring_size1);
+
+	if (tx_ring_size2 == MLX4_EN_AUTO_CONF)
+		tx_ring_size2 = MLX4_EN_DEF_TX_RING_SIZE;
+	params->prof[2].tx_ring_size =
+		(tx_ring_size2 < MLX4_EN_MIN_TX_SIZE) ?
+		 MLX4_EN_MIN_TX_SIZE : roundup_pow_of_two(tx_ring_size2);
+
+	if (rx_ring_size1 == MLX4_EN_AUTO_CONF)
+		rx_ring_size1 = MLX4_EN_DEF_RX_RING_SIZE;
+	params->prof[1].rx_ring_size =
+		(rx_ring_size1 < MLX4_EN_MIN_RX_SIZE) ?
+		 MLX4_EN_MIN_RX_SIZE : roundup_pow_of_two(rx_ring_size1);
+
+	if (rx_ring_size2 == MLX4_EN_AUTO_CONF)
+		rx_ring_size2 = MLX4_EN_DEF_RX_RING_SIZE;
+	params->prof[2].rx_ring_size =
+		(rx_ring_size2 < MLX4_EN_MIN_RX_SIZE) ?
+		 MLX4_EN_MIN_RX_SIZE : roundup_pow_of_two(rx_ring_size2);
+	return 0;
+}
+
+
+/*
+ * Ethtool support
+ */
+
+static void mlx4_en_update_lro_stats(struct mlx4_en_priv *priv)
+{
+	int i;
+
+	priv->port_stats.lro_aggregated = 0;
+	priv->port_stats.lro_flushed = 0;
+	priv->port_stats.lro_no_desc = 0;
+
+	for (i = 0; i < priv->rx_ring_num; i++) {
+		priv->port_stats.lro_aggregated += priv->rx_ring[i].lro.stats.aggregated;
+		priv->port_stats.lro_flushed += priv->rx_ring[i].lro.stats.flushed;
+		priv->port_stats.lro_no_desc += priv->rx_ring[i].lro.stats.no_desc;
+	}
+}
+
+static void
+mlx4_en_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+
+	sprintf(drvinfo->driver, DRV_NAME " (%s)", mdev->dev->board_id);
+	strncpy(drvinfo->version, DRV_VERSION " (" DRV_RELDATE ")", 32);
+	sprintf(drvinfo->fw_version, "%d.%d.%d",
+		(u16) (mdev->dev->caps.fw_ver >> 32),
+		(u16) ((mdev->dev->caps.fw_ver >> 16) & 0xffff),
+		(u16) (mdev->dev->caps.fw_ver & 0xffff));
+	strncpy(drvinfo->bus_info, pci_name(mdev->dev->pdev), 32);
+	drvinfo->n_stats = 0;
+	drvinfo->regdump_len = 0;
+	drvinfo->eedump_len = 0;
+}
+
+static u32 mlx4_en_get_tso(struct net_device *dev)
+{
+	return (dev->features & NETIF_F_TSO) != 0;
+}
+
+static int mlx4_en_set_tso(struct net_device *dev, u32 data)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+
+	if (data) {
+		if (!priv->mdev->LSO_support)
+			return -EPERM;
+		dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
+	} else
+		dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
+	return 0;
+}
+
+static u32 mlx4_en_get_rx_csum(struct net_device *dev)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	return priv->rx_csum;
+}
+
+static int mlx4_en_set_rx_csum(struct net_device *dev, u32 data)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	priv->rx_csum = (data != 0);
+	return 0;
+}
+
+static const char main_strings[][ETH_GSTRING_LEN] = {
+	"rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
+	"tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
+	"rx_length_errors", "rx_over_errors", "rx_crc_errors",
+	"rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
+	"tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
+	"tx_heartbeat_errors", "tx_window_errors",
+
+	/* port statistics */
+	"lro_aggregated", "lro_flushed", "lro_no_desc", "tso_packets",
+	"queue_stopped", "wake_queue", "tx_timeout", "rx_alloc_failed",
+	"rx_csum_good", "rx_csum_none", "tx_chksum_offload",
+
+	/* packet statistics */
+	"broadcast", "rx_prio_0", "rx_prio_1", "rx_prio_2", "rx_prio_3",
+	"rx_prio_4", "rx_prio_5", "rx_prio_6", "rx_prio_7", "tx_prio_0",
+	"tx_prio_1", "tx_prio_2", "tx_prio_3", "tx_prio_4", "tx_prio_5",
+	"tx_prio_6", "tx_prio_7",
+};
+#define NUM_MAIN_STATS	21
+#define NUM_ALL_STATS	(NUM_MAIN_STATS + NUM_PORT_STATS + NUM_PKT_STATS + NUM_PERF_STATS)
+
+static u32 mlx4_en_get_msglevel(struct net_device *dev)
+{
+	return ((struct mlx4_en_priv *) netdev_priv(dev))->msg_enable;
+}
+
+static void mlx4_en_set_msglevel(struct net_device *dev, u32 val)
+{
+	((struct mlx4_en_priv *) netdev_priv(dev))->msg_enable = val;
+}
+
+static void mlx4_en_get_wol(struct net_device *netdev,
+			    struct ethtool_wolinfo *wol)
+{
+	wol->supported = 0;
+	wol->wolopts = 0;
+
+	return;
+}
+
+static int mlx4_en_get_sset_count(struct net_device *dev, int sset)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+
+	if (sset != ETH_SS_STATS)
+		return -EOPNOTSUPP;
+
+	return NUM_ALL_STATS + (priv->tx_ring_num + priv->rx_ring_num) * 2;
+}
+
+static void mlx4_en_get_ethtool_stats(struct net_device *dev,
+		struct ethtool_stats *stats, uint64_t *data)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	int index = 0;
+	int i;
+
+	spin_lock_bh(&priv->stats_lock);
+
+	mlx4_en_update_lro_stats(priv);
+
+	for (i = 0; i < NUM_MAIN_STATS; i++)
+		data[index++] = ((unsigned long *) &priv->stats)[i];
+	for (i = 0; i < NUM_PORT_STATS; i++)
+		data[index++] = ((unsigned long *) &priv->port_stats)[i];
+	for (i = 0; i < priv->tx_ring_num; i++) {
+		data[index++] = priv->tx_ring[i].packets;
+		data[index++] = priv->tx_ring[i].bytes;
+	}
+	for (i = 0; i < priv->rx_ring_num; i++) {
+		data[index++] = priv->rx_ring[i].packets;
+		data[index++] = priv->rx_ring[i].bytes;
+	}
+	for (i = 0; i < NUM_PKT_STATS; i++)
+		data[index++] = ((unsigned long *) &priv->pkstats)[i];
+	spin_unlock_bh(&priv->stats_lock);
+
+}
+
+static void mlx4_en_get_strings(struct net_device *dev,
+				uint32_t stringset, uint8_t *data)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	int index = 0;
+	int i;
+
+	if (stringset != ETH_SS_STATS)
+		return;
+
+	/* Add main counters */
+	for (i = 0; i < NUM_MAIN_STATS; i++)
+		strcpy(data + (index++) * ETH_GSTRING_LEN, main_strings[i]);
+	for (i = 0; i < NUM_PORT_STATS; i++)
+		strcpy(data + (index++) * ETH_GSTRING_LEN,
+			main_strings[i + NUM_MAIN_STATS]);
+	for (i = 0; i < priv->tx_ring_num; i++) {
+		sprintf(data + (index++) * ETH_GSTRING_LEN,
+			"tx%d_packets", i);
+		sprintf(data + (index++) * ETH_GSTRING_LEN,
+			"tx%d_bytes", i);
+	}
+	for (i = 0; i < priv->rx_ring_num; i++) {
+		sprintf(data + (index++) * ETH_GSTRING_LEN,
+			"rx%d_packets", i);
+		sprintf(data + (index++) * ETH_GSTRING_LEN,
+			"rx%d_bytes", i);
+	}
+	for (i = 0; i < NUM_PKT_STATS; i++)
+		strcpy(data + (index++) * ETH_GSTRING_LEN,
+			main_strings[i + NUM_MAIN_STATS + NUM_PORT_STATS]);
+}
+
+static int mlx4_en_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	cmd->autoneg = AUTONEG_DISABLE;
+	cmd->supported = SUPPORTED_10000baseT_Full;
+	cmd->advertising = SUPPORTED_10000baseT_Full;
+	if (netif_carrier_ok(dev)) {
+		cmd->speed = SPEED_10000;
+		cmd->duplex = DUPLEX_FULL;
+	} else {
+		cmd->speed = -1;
+		cmd->duplex = -1;
+	}
+	return 0;
+}
+
+static int mlx4_en_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	if ((cmd->autoneg == AUTONEG_ENABLE) ||
+	    (cmd->speed != SPEED_10000) || (cmd->duplex != DUPLEX_FULL))
+		return -EINVAL;
+
+	/* Nothing to change */
+	return 0;
+}
+
+static int mlx4_en_get_coalesce(struct net_device *dev,
+			      struct ethtool_coalesce *coal)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+
+	coal->tx_coalesce_usecs = 0;
+	coal->tx_max_coalesced_frames = 0;
+	coal->rx_coalesce_usecs = priv->rx_usecs;
+	coal->rx_max_coalesced_frames = priv->rx_frames;
+
+	coal->pkt_rate_low = priv->pkt_rate_low;
+	coal->rx_coalesce_usecs_low = priv->rx_usecs_low;
+	coal->pkt_rate_high = priv->pkt_rate_high;
+	coal->rx_coalesce_usecs_high = priv->rx_usecs_high;
+	coal->rate_sample_interval = priv->sample_interval;
+	coal->use_adaptive_rx_coalesce = priv->adaptive_rx_coal;
+	return 0;
+}
+
+static int mlx4_en_set_coalesce(struct net_device *dev,
+			      struct ethtool_coalesce *coal)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	int err, i;
+
+	priv->rx_frames = (coal->rx_max_coalesced_frames ==
+			   MLX4_EN_AUTO_CONF) ?
+				MLX4_EN_RX_COAL_TARGET /
+				priv->dev->mtu + 1 :
+				coal->rx_max_coalesced_frames;
+	priv->rx_usecs = (coal->rx_coalesce_usecs ==
+			  MLX4_EN_AUTO_CONF) ?
+				MLX4_EN_RX_COAL_TIME :
+				coal->rx_coalesce_usecs;
+
+	/* Set adaptive coalescing params */
+	priv->pkt_rate_low = coal->pkt_rate_low;
+	priv->rx_usecs_low = coal->rx_coalesce_usecs_low;
+	priv->pkt_rate_high = coal->pkt_rate_high;
+	priv->rx_usecs_high = coal->rx_coalesce_usecs_high;
+	priv->sample_interval = coal->rate_sample_interval;
+	priv->adaptive_rx_coal = coal->use_adaptive_rx_coalesce;
+	priv->last_moder_time = MLX4_EN_AUTO_CONF;
+	if (priv->adaptive_rx_coal)
+		return 0;
+
+	for (i = 0; i < priv->rx_ring_num; i++) {
+		priv->rx_cq[i].moder_cnt = priv->rx_frames;
+		priv->rx_cq[i].moder_time = priv->rx_usecs;
+		err = mlx4_en_set_cq_moder(priv, &priv->rx_cq[i]);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+static int mlx4_en_set_pauseparam(struct net_device *dev,
+				struct ethtool_pauseparam *pause)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int err;
+
+	mdev->profile.tx_pause = pause->tx_pause != 0;
+	mdev->profile.rx_pause = pause->rx_pause != 0;
+	err = mlx4_SET_PORT_general(mdev->dev, priv->port,
+				    priv->rx_skb_size + ETH_FCS_LEN,
+				    mdev->profile.tx_pause,
+				    mdev->profile.tx_ppp,
+				    mdev->profile.rx_pause,
+				    mdev->profile.rx_ppp);
+	if (err)
+		mlx4_err(mdev, "Failed setting pause params to\n");
+
+	return err;
+}
+
+static void mlx4_en_get_pauseparam(struct net_device *dev,
+				 struct ethtool_pauseparam *pause)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+
+	pause->tx_pause = mdev->profile.tx_pause;
+	pause->rx_pause = mdev->profile.rx_pause;
+}
+
+static void mlx4_en_get_ringparam(struct net_device *dev,
+				  struct ethtool_ringparam *param)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+
+	memset(param, 0, sizeof(*param));
+	param->rx_max_pending = mdev->dev->caps.max_rq_sg;
+	param->tx_max_pending = mdev->dev->caps.max_sq_sg;
+	param->rx_pending = mdev->profile.prof[priv->port].rx_ring_size;
+	param->tx_pending = mdev->profile.prof[priv->port].tx_ring_size;
+}
+
+const struct ethtool_ops mlx4_en_ethtool_ops = {
+	.get_drvinfo = mlx4_en_get_drvinfo,
+	.get_settings = mlx4_en_get_settings,
+	.set_settings = mlx4_en_set_settings,
+#ifdef NETIF_F_TSO
+	.get_tso = mlx4_en_get_tso,
+	.set_tso = mlx4_en_set_tso,
+#endif
+	.get_sg = ethtool_op_get_sg,
+	.set_sg = ethtool_op_set_sg,
+	.get_link = ethtool_op_get_link,
+	.get_rx_csum = mlx4_en_get_rx_csum,
+	.set_rx_csum = mlx4_en_set_rx_csum,
+	.get_tx_csum = ethtool_op_get_tx_csum,
+	.set_tx_csum = ethtool_op_set_tx_ipv6_csum,
+	.get_strings = mlx4_en_get_strings,
+	.get_sset_count = mlx4_en_get_sset_count,
+	.get_ethtool_stats = mlx4_en_get_ethtool_stats,
+	.get_wol = mlx4_en_get_wol,
+	.get_msglevel = mlx4_en_get_msglevel,
+	.set_msglevel = mlx4_en_set_msglevel,
+	.get_coalesce = mlx4_en_get_coalesce,
+	.set_coalesce = mlx4_en_set_coalesce,
+	.get_pauseparam = mlx4_en_get_pauseparam,
+	.set_pauseparam = mlx4_en_set_pauseparam,
+	.get_ringparam = mlx4_en_get_ringparam,
+	.get_flags = ethtool_op_get_flags,
+	.set_flags = ethtool_op_set_flags,
+};
+
+
+
+
+
diff --git a/drivers/net/mlx4/en_port.c b/drivers/net/mlx4/en_port.c
new file mode 100644
index 0000000..c5a4c03
--- /dev/null
+++ b/drivers/net/mlx4/en_port.c
@@ -0,0 +1,261 @@
+/*
+ * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+
+#include <linux/if_vlan.h>
+
+#include <linux/mlx4/device.h>
+#include <linux/mlx4/cmd.h>
+
+#include "en_port.h"
+#include "mlx4_en.h"
+
+
+int mlx4_SET_MCAST_FLTR(struct mlx4_dev *dev, u8 port,
+			u64 mac, u64 clear, u8 mode)
+{
+	return mlx4_cmd(dev, (mac | (clear << 63)), port, mode,
+			MLX4_CMD_SET_MCAST_FLTR, MLX4_CMD_TIME_CLASS_B);
+}
+
+int mlx4_SET_VLAN_FLTR(struct mlx4_dev *dev, u8 port, struct vlan_group *grp)
+{
+	struct mlx4_cmd_mailbox *mailbox;
+	struct mlx4_set_vlan_fltr_mbox *filter;
+	int i;
+	int j;
+	int index = 0;
+	u32 entry;
+	int err = 0;
+
+	mailbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(mailbox))
+		return PTR_ERR(mailbox);
+
+	filter = mailbox->buf;
+	if (grp) {
+		memset(filter, 0, sizeof *filter);
+		for (i = VLAN_FLTR_SIZE - 1; i >= 0; i--) {
+			entry = 0;
+			for (j = 0; j < 32; j++)
+				if (vlan_group_get_device(grp, index++))
+					entry |= 1 << j;
+			filter->entry[i] = cpu_to_be32(entry);
+		}
+	} else {
+		/* When no vlans are configured we block all vlans */
+		memset(filter, 0, sizeof(*filter));
+	}
+	err = mlx4_cmd(dev, mailbox->dma, port, 0, MLX4_CMD_SET_VLAN_FLTR,
+		       MLX4_CMD_TIME_CLASS_B);
+	mlx4_free_cmd_mailbox(dev, mailbox);
+	return err;
+}
+
+
+int mlx4_SET_PORT_general(struct mlx4_dev *dev, u8 port, int mtu,
+			  u8 pptx, u8 pfctx, u8 pprx, u8 pfcrx)
+{
+	struct mlx4_cmd_mailbox *mailbox;
+	struct mlx4_set_port_general_context *context;
+	int err;
+	u32 in_mod;
+
+	mailbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(mailbox))
+		return PTR_ERR(mailbox);
+	context = mailbox->buf;
+	memset(context, 0, sizeof *context);
+
+	context->flags = SET_PORT_GEN_ALL_VALID;
+	context->mtu = cpu_to_be16(mtu);
+	context->pptx = (pptx * (!pfctx)) << 7;
+	context->pfctx = pfctx;
+	context->pprx = (pprx * (!pfcrx)) << 7;
+	context->pfcrx = pfcrx;
+
+	in_mod = MLX4_SET_PORT_GENERAL << 8 | port;
+	err = mlx4_cmd(dev, mailbox->dma, in_mod, 1, MLX4_CMD_SET_PORT,
+		       MLX4_CMD_TIME_CLASS_B);
+
+	mlx4_free_cmd_mailbox(dev, mailbox);
+	return err;
+}
+
+int mlx4_SET_PORT_qpn_calc(struct mlx4_dev *dev, u8 port, u32 base_qpn,
+			   u8 promisc)
+{
+	struct mlx4_cmd_mailbox *mailbox;
+	struct mlx4_set_port_rqp_calc_context *context;
+	int err;
+	u32 in_mod;
+
+	mailbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(mailbox))
+		return PTR_ERR(mailbox);
+	context = mailbox->buf;
+	memset(context, 0, sizeof *context);
+
+	context->base_qpn = cpu_to_be32(base_qpn);
+	context->promisc = cpu_to_be32(promisc << SET_PORT_PROMISC_SHIFT | base_qpn);
+	context->mcast = cpu_to_be32(1 << SET_PORT_PROMISC_SHIFT | base_qpn);
+	context->intra_no_vlan = 0;
+	context->no_vlan = MLX4_NO_VLAN_IDX;
+	context->intra_vlan_miss = 0;
+	context->vlan_miss = MLX4_VLAN_MISS_IDX;
+
+	in_mod = MLX4_SET_PORT_RQP_CALC << 8 | port;
+	err = mlx4_cmd(dev, mailbox->dma, in_mod, 1, MLX4_CMD_SET_PORT,
+		       MLX4_CMD_TIME_CLASS_B);
+
+	mlx4_free_cmd_mailbox(dev, mailbox);
+	return err;
+}
+
+
+int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset)
+{
+	struct mlx4_en_stat_out_mbox *mlx4_en_stats;
+	struct mlx4_en_priv *priv = netdev_priv(mdev->pndev[port]);
+	struct net_device_stats *stats = &priv->stats;
+	struct mlx4_cmd_mailbox *mailbox;
+	u64 in_mod = reset << 8 | port;
+	int err;
+
+	mailbox = mlx4_alloc_cmd_mailbox(mdev->dev);
+	if (IS_ERR(mailbox))
+		return PTR_ERR(mailbox);
+	memset(mailbox->buf, 0, sizeof(*mlx4_en_stats));
+	err = mlx4_cmd_box(mdev->dev, 0, mailbox->dma, in_mod, 0,
+			   MLX4_CMD_DUMP_ETH_STATS, MLX4_CMD_TIME_CLASS_B);
+	if (err)
+		goto out;
+
+	mlx4_en_stats = mailbox->buf;
+
+	spin_lock_bh(&priv->stats_lock);
+
+	stats->rx_packets = be32_to_cpu(mlx4_en_stats->RTOTFRMS) -
+			    be32_to_cpu(mlx4_en_stats->RDROP);
+	stats->tx_packets = be64_to_cpu(mlx4_en_stats->TTOT_prio_0) +
+			    be64_to_cpu(mlx4_en_stats->TTOT_prio_1) +
+			    be64_to_cpu(mlx4_en_stats->TTOT_prio_2) +
+			    be64_to_cpu(mlx4_en_stats->TTOT_prio_3) +
+			    be64_to_cpu(mlx4_en_stats->TTOT_prio_4) +
+			    be64_to_cpu(mlx4_en_stats->TTOT_prio_5) +
+			    be64_to_cpu(mlx4_en_stats->TTOT_prio_6) +
+			    be64_to_cpu(mlx4_en_stats->TTOT_prio_7) +
+			    be64_to_cpu(mlx4_en_stats->TTOT_novlan) +
+			    be64_to_cpu(mlx4_en_stats->TTOT_loopbk);
+	stats->rx_bytes = be64_to_cpu(mlx4_en_stats->ROCT_prio_0) +
+			  be64_to_cpu(mlx4_en_stats->ROCT_prio_1) +
+			  be64_to_cpu(mlx4_en_stats->ROCT_prio_2) +
+			  be64_to_cpu(mlx4_en_stats->ROCT_prio_3) +
+			  be64_to_cpu(mlx4_en_stats->ROCT_prio_4) +
+			  be64_to_cpu(mlx4_en_stats->ROCT_prio_5) +
+			  be64_to_cpu(mlx4_en_stats->ROCT_prio_6) +
+			  be64_to_cpu(mlx4_en_stats->ROCT_prio_7) +
+			  be64_to_cpu(mlx4_en_stats->ROCT_novlan);
+
+	stats->tx_bytes = be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_0) +
+			  be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_1) +
+			  be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_2) +
+			  be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_3) +
+			  be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_4) +
+			  be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_5) +
+			  be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_6) +
+			  be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_7) +
+			  be64_to_cpu(mlx4_en_stats->TTTLOCT_novlan) +
+			  be64_to_cpu(mlx4_en_stats->TTTLOCT_loopbk);
+
+	stats->rx_errors = be64_to_cpu(mlx4_en_stats->PCS) +
+			   be32_to_cpu(mlx4_en_stats->RdropLength) +
+			   be32_to_cpu(mlx4_en_stats->RJBBR) +
+			   be32_to_cpu(mlx4_en_stats->RCRC) +
+			   be32_to_cpu(mlx4_en_stats->RRUNT);
+	stats->tx_errors = be32_to_cpu(mlx4_en_stats->TDROP);
+	stats->multicast = be64_to_cpu(mlx4_en_stats->MCAST_prio_0) +
+			   be64_to_cpu(mlx4_en_stats->MCAST_prio_1) +
+			   be64_to_cpu(mlx4_en_stats->MCAST_prio_2) +
+			   be64_to_cpu(mlx4_en_stats->MCAST_prio_3) +
+			   be64_to_cpu(mlx4_en_stats->MCAST_prio_4) +
+			   be64_to_cpu(mlx4_en_stats->MCAST_prio_5) +
+			   be64_to_cpu(mlx4_en_stats->MCAST_prio_6) +
+			   be64_to_cpu(mlx4_en_stats->MCAST_prio_7) +
+			   be64_to_cpu(mlx4_en_stats->MCAST_novlan);
+	stats->collisions = 0;
+	stats->rx_length_errors = be32_to_cpu(mlx4_en_stats->RdropLength);
+	stats->rx_over_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw);
+	stats->rx_crc_errors = be32_to_cpu(mlx4_en_stats->RCRC);
+	stats->rx_frame_errors = 0;
+	stats->rx_fifo_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw);
+	stats->rx_missed_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw);
+	stats->tx_aborted_errors = 0;
+	stats->tx_carrier_errors = 0;
+	stats->tx_fifo_errors = 0;
+	stats->tx_heartbeat_errors = 0;
+	stats->tx_window_errors = 0;
+
+	priv->pkstats.broadcast =
+				be64_to_cpu(mlx4_en_stats->RBCAST_prio_0) +
+				be64_to_cpu(mlx4_en_stats->RBCAST_prio_1) +
+				be64_to_cpu(mlx4_en_stats->RBCAST_prio_2) +
+				be64_to_cpu(mlx4_en_stats->RBCAST_prio_3) +
+				be64_to_cpu(mlx4_en_stats->RBCAST_prio_4) +
+				be64_to_cpu(mlx4_en_stats->RBCAST_prio_5) +
+				be64_to_cpu(mlx4_en_stats->RBCAST_prio_6) +
+				be64_to_cpu(mlx4_en_stats->RBCAST_prio_7) +
+				be64_to_cpu(mlx4_en_stats->RBCAST_novlan);
+	priv->pkstats.rx_prio[0] = be64_to_cpu(mlx4_en_stats->RTOT_prio_0);
+	priv->pkstats.rx_prio[1] = be64_to_cpu(mlx4_en_stats->RTOT_prio_1);
+	priv->pkstats.rx_prio[2] = be64_to_cpu(mlx4_en_stats->RTOT_prio_2);
+	priv->pkstats.rx_prio[3] = be64_to_cpu(mlx4_en_stats->RTOT_prio_3);
+	priv->pkstats.rx_prio[4] = be64_to_cpu(mlx4_en_stats->RTOT_prio_4);
+	priv->pkstats.rx_prio[5] = be64_to_cpu(mlx4_en_stats->RTOT_prio_5);
+	priv->pkstats.rx_prio[6] = be64_to_cpu(mlx4_en_stats->RTOT_prio_6);
+	priv->pkstats.rx_prio[7] = be64_to_cpu(mlx4_en_stats->RTOT_prio_7);
+	priv->pkstats.tx_prio[0] = be64_to_cpu(mlx4_en_stats->TTOT_prio_0);
+	priv->pkstats.tx_prio[1] = be64_to_cpu(mlx4_en_stats->TTOT_prio_1);
+	priv->pkstats.tx_prio[2] = be64_to_cpu(mlx4_en_stats->TTOT_prio_2);
+	priv->pkstats.tx_prio[3] = be64_to_cpu(mlx4_en_stats->TTOT_prio_3);
+	priv->pkstats.tx_prio[4] = be64_to_cpu(mlx4_en_stats->TTOT_prio_4);
+	priv->pkstats.tx_prio[5] = be64_to_cpu(mlx4_en_stats->TTOT_prio_5);
+	priv->pkstats.tx_prio[6] = be64_to_cpu(mlx4_en_stats->TTOT_prio_6);
+	priv->pkstats.tx_prio[7] = be64_to_cpu(mlx4_en_stats->TTOT_prio_7);
+	spin_unlock_bh(&priv->stats_lock);
+
+out:
+	mlx4_free_cmd_mailbox(mdev->dev, mailbox);
+	return err;
+}
+
diff --git a/drivers/net/mlx4/en_port.h b/drivers/net/mlx4/en_port.h
new file mode 100644
index 0000000..e6477f12
--- /dev/null
+++ b/drivers/net/mlx4/en_port.h
@@ -0,0 +1,570 @@
+/*
+ * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#ifndef _MLX4_EN_PORT_H_
+#define _MLX4_EN_PORT_H_
+
+
+#define SET_PORT_GEN_ALL_VALID	0x7
+#define SET_PORT_PROMISC_SHIFT	31
+
+enum {
+	MLX4_CMD_SET_VLAN_FLTR  = 0x47,
+	MLX4_CMD_SET_MCAST_FLTR = 0x48,
+	MLX4_CMD_DUMP_ETH_STATS = 0x49,
+};
+
+struct mlx4_set_port_general_context {
+	u8 reserved[3];
+	u8 flags;
+	u16 reserved2;
+	__be16 mtu;
+	u8 pptx;
+	u8 pfctx;
+	u16 reserved3;
+	u8 pprx;
+	u8 pfcrx;
+	u16 reserved4;
+};
+
+struct mlx4_set_port_rqp_calc_context {
+	__be32 base_qpn;
+	__be32 flags;
+	u8 reserved[3];
+	u8 mac_miss;
+	u8 intra_no_vlan;
+	u8 no_vlan;
+	u8 intra_vlan_miss;
+	u8 vlan_miss;
+	u8 reserved2[3];
+	u8 no_vlan_prio;
+	__be32 promisc;
+	__be32 mcast;
+};
+
+#define VLAN_FLTR_SIZE	128
+struct mlx4_set_vlan_fltr_mbox {
+	__be32 entry[VLAN_FLTR_SIZE];
+};
+
+
+enum {
+	MLX4_MCAST_CONFIG       = 0,
+	MLX4_MCAST_DISABLE      = 1,
+	MLX4_MCAST_ENABLE       = 2,
+};
+
+
+struct mlx4_en_stat_out_mbox {
+	/* Received frames with a length of 64 octets */
+	__be64 R64_prio_0;
+	__be64 R64_prio_1;
+	__be64 R64_prio_2;
+	__be64 R64_prio_3;
+	__be64 R64_prio_4;
+	__be64 R64_prio_5;
+	__be64 R64_prio_6;
+	__be64 R64_prio_7;
+	__be64 R64_novlan;
+	/* Received frames with a length of 127 octets */
+	__be64 R127_prio_0;
+	__be64 R127_prio_1;
+	__be64 R127_prio_2;
+	__be64 R127_prio_3;
+	__be64 R127_prio_4;
+	__be64 R127_prio_5;
+	__be64 R127_prio_6;
+	__be64 R127_prio_7;
+	__be64 R127_novlan;
+	/* Received frames with a length of 255 octets */
+	__be64 R255_prio_0;
+	__be64 R255_prio_1;
+	__be64 R255_prio_2;
+	__be64 R255_prio_3;
+	__be64 R255_prio_4;
+	__be64 R255_prio_5;
+	__be64 R255_prio_6;
+	__be64 R255_prio_7;
+	__be64 R255_novlan;
+	/* Received frames with a length of 511 octets */
+	__be64 R511_prio_0;
+	__be64 R511_prio_1;
+	__be64 R511_prio_2;
+	__be64 R511_prio_3;
+	__be64 R511_prio_4;
+	__be64 R511_prio_5;
+	__be64 R511_prio_6;
+	__be64 R511_prio_7;
+	__be64 R511_novlan;
+	/* Received frames with a length of 1023 octets */
+	__be64 R1023_prio_0;
+	__be64 R1023_prio_1;
+	__be64 R1023_prio_2;
+	__be64 R1023_prio_3;
+	__be64 R1023_prio_4;
+	__be64 R1023_prio_5;
+	__be64 R1023_prio_6;
+	__be64 R1023_prio_7;
+	__be64 R1023_novlan;
+	/* Received frames with a length of 1518 octets */
+	__be64 R1518_prio_0;
+	__be64 R1518_prio_1;
+	__be64 R1518_prio_2;
+	__be64 R1518_prio_3;
+	__be64 R1518_prio_4;
+	__be64 R1518_prio_5;
+	__be64 R1518_prio_6;
+	__be64 R1518_prio_7;
+	__be64 R1518_novlan;
+	/* Received frames with a length of 1522 octets */
+	__be64 R1522_prio_0;
+	__be64 R1522_prio_1;
+	__be64 R1522_prio_2;
+	__be64 R1522_prio_3;
+	__be64 R1522_prio_4;
+	__be64 R1522_prio_5;
+	__be64 R1522_prio_6;
+	__be64 R1522_prio_7;
+	__be64 R1522_novlan;
+	/* Received frames with a length of 1548 octets */
+	__be64 R1548_prio_0;
+	__be64 R1548_prio_1;
+	__be64 R1548_prio_2;
+	__be64 R1548_prio_3;
+	__be64 R1548_prio_4;
+	__be64 R1548_prio_5;
+	__be64 R1548_prio_6;
+	__be64 R1548_prio_7;
+	__be64 R1548_novlan;
+	/* Received frames with a length of 1548 < octets < MTU */
+	__be64 R2MTU_prio_0;
+	__be64 R2MTU_prio_1;
+	__be64 R2MTU_prio_2;
+	__be64 R2MTU_prio_3;
+	__be64 R2MTU_prio_4;
+	__be64 R2MTU_prio_5;
+	__be64 R2MTU_prio_6;
+	__be64 R2MTU_prio_7;
+	__be64 R2MTU_novlan;
+	/* Received frames with a length of MTU< octets and good CRC */
+	__be64 RGIANT_prio_0;
+	__be64 RGIANT_prio_1;
+	__be64 RGIANT_prio_2;
+	__be64 RGIANT_prio_3;
+	__be64 RGIANT_prio_4;
+	__be64 RGIANT_prio_5;
+	__be64 RGIANT_prio_6;
+	__be64 RGIANT_prio_7;
+	__be64 RGIANT_novlan;
+	/* Received broadcast frames with good CRC */
+	__be64 RBCAST_prio_0;
+	__be64 RBCAST_prio_1;
+	__be64 RBCAST_prio_2;
+	__be64 RBCAST_prio_3;
+	__be64 RBCAST_prio_4;
+	__be64 RBCAST_prio_5;
+	__be64 RBCAST_prio_6;
+	__be64 RBCAST_prio_7;
+	__be64 RBCAST_novlan;
+	/* Received multicast frames with good CRC */
+	__be64 MCAST_prio_0;
+	__be64 MCAST_prio_1;
+	__be64 MCAST_prio_2;
+	__be64 MCAST_prio_3;
+	__be64 MCAST_prio_4;
+	__be64 MCAST_prio_5;
+	__be64 MCAST_prio_6;
+	__be64 MCAST_prio_7;
+	__be64 MCAST_novlan;
+	/* Received unicast not short or GIANT frames with good CRC */
+	__be64 RTOTG_prio_0;
+	__be64 RTOTG_prio_1;
+	__be64 RTOTG_prio_2;
+	__be64 RTOTG_prio_3;
+	__be64 RTOTG_prio_4;
+	__be64 RTOTG_prio_5;
+	__be64 RTOTG_prio_6;
+	__be64 RTOTG_prio_7;
+	__be64 RTOTG_novlan;
+
+	/* Count of total octets of received frames, includes framing characters */
+	__be64 RTTLOCT_prio_0;
+	/* Count of total octets of received frames, not including framing
+	   characters */
+	__be64 RTTLOCT_NOFRM_prio_0;
+	/* Count of Total number of octets received
+	   (only for frames without errors) */
+	__be64 ROCT_prio_0;
+
+	__be64 RTTLOCT_prio_1;
+	__be64 RTTLOCT_NOFRM_prio_1;
+	__be64 ROCT_prio_1;
+
+	__be64 RTTLOCT_prio_2;
+	__be64 RTTLOCT_NOFRM_prio_2;
+	__be64 ROCT_prio_2;
+
+	__be64 RTTLOCT_prio_3;
+	__be64 RTTLOCT_NOFRM_prio_3;
+	__be64 ROCT_prio_3;
+
+	__be64 RTTLOCT_prio_4;
+	__be64 RTTLOCT_NOFRM_prio_4;
+	__be64 ROCT_prio_4;
+
+	__be64 RTTLOCT_prio_5;
+	__be64 RTTLOCT_NOFRM_prio_5;
+	__be64 ROCT_prio_5;
+
+	__be64 RTTLOCT_prio_6;
+	__be64 RTTLOCT_NOFRM_prio_6;
+	__be64 ROCT_prio_6;
+
+	__be64 RTTLOCT_prio_7;
+	__be64 RTTLOCT_NOFRM_prio_7;
+	__be64 ROCT_prio_7;
+
+	__be64 RTTLOCT_novlan;
+	__be64 RTTLOCT_NOFRM_novlan;
+	__be64 ROCT_novlan;
+
+	/* Count of Total received frames including bad frames */
+	__be64 RTOT_prio_0;
+	/* Count of  Total number of received frames with 802.1Q encapsulation */
+	__be64 R1Q_prio_0;
+	__be64 reserved1;
+
+	__be64 RTOT_prio_1;
+	__be64 R1Q_prio_1;
+	__be64 reserved2;
+
+	__be64 RTOT_prio_2;
+	__be64 R1Q_prio_2;
+	__be64 reserved3;
+
+	__be64 RTOT_prio_3;
+	__be64 R1Q_prio_3;
+	__be64 reserved4;
+
+	__be64 RTOT_prio_4;
+	__be64 R1Q_prio_4;
+	__be64 reserved5;
+
+	__be64 RTOT_prio_5;
+	__be64 R1Q_prio_5;
+	__be64 reserved6;
+
+	__be64 RTOT_prio_6;
+	__be64 R1Q_prio_6;
+	__be64 reserved7;
+
+	__be64 RTOT_prio_7;
+	__be64 R1Q_prio_7;
+	__be64 reserved8;
+
+	__be64 RTOT_novlan;
+	__be64 R1Q_novlan;
+	__be64 reserved9;
+
+	/* Total number of Successfully Received Control Frames */
+	__be64 RCNTL;
+	__be64 reserved10;
+	__be64 reserved11;
+	__be64 reserved12;
+	/* Count of received frames with a length/type field  value between 46
+	   (42 for VLANtagged frames) and 1500 (also 1500 for VLAN-tagged frames),
+	   inclusive */
+	__be64 RInRangeLengthErr;
+	/* Count of received frames with length/type field between 1501 and 1535
+	   decimal, inclusive */
+	__be64 ROutRangeLengthErr;
+	/* Count of received frames that are longer than max allowed size for
+	   802.3 frames (1518/1522) */
+	__be64 RFrmTooLong;
+	/* Count frames received with PCS error */
+	__be64 PCS;
+
+	/* Transmit frames with a length of 64 octets */
+	__be64 T64_prio_0;
+	__be64 T64_prio_1;
+	__be64 T64_prio_2;
+	__be64 T64_prio_3;
+	__be64 T64_prio_4;
+	__be64 T64_prio_5;
+	__be64 T64_prio_6;
+	__be64 T64_prio_7;
+	__be64 T64_novlan;
+	__be64 T64_loopbk;
+	/* Transmit frames with a length of 65 to 127 octets. */
+	__be64 T127_prio_0;
+	__be64 T127_prio_1;
+	__be64 T127_prio_2;
+	__be64 T127_prio_3;
+	__be64 T127_prio_4;
+	__be64 T127_prio_5;
+	__be64 T127_prio_6;
+	__be64 T127_prio_7;
+	__be64 T127_novlan;
+	__be64 T127_loopbk;
+	/* Transmit frames with a length of 128 to 255 octets */
+	__be64 T255_prio_0;
+	__be64 T255_prio_1;
+	__be64 T255_prio_2;
+	__be64 T255_prio_3;
+	__be64 T255_prio_4;
+	__be64 T255_prio_5;
+	__be64 T255_prio_6;
+	__be64 T255_prio_7;
+	__be64 T255_novlan;
+	__be64 T255_loopbk;
+	/* Transmit frames with a length of 256 to 511 octets */
+	__be64 T511_prio_0;
+	__be64 T511_prio_1;
+	__be64 T511_prio_2;
+	__be64 T511_prio_3;
+	__be64 T511_prio_4;
+	__be64 T511_prio_5;
+	__be64 T511_prio_6;
+	__be64 T511_prio_7;
+	__be64 T511_novlan;
+	__be64 T511_loopbk;
+	/* Transmit frames with a length of 512 to 1023 octets */
+	__be64 T1023_prio_0;
+	__be64 T1023_prio_1;
+	__be64 T1023_prio_2;
+	__be64 T1023_prio_3;
+	__be64 T1023_prio_4;
+	__be64 T1023_prio_5;
+	__be64 T1023_prio_6;
+	__be64 T1023_prio_7;
+	__be64 T1023_novlan;
+	__be64 T1023_loopbk;
+	/* Transmit frames with a length of 1024 to 1518 octets */
+	__be64 T1518_prio_0;
+	__be64 T1518_prio_1;
+	__be64 T1518_prio_2;
+	__be64 T1518_prio_3;
+	__be64 T1518_prio_4;
+	__be64 T1518_prio_5;
+	__be64 T1518_prio_6;
+	__be64 T1518_prio_7;
+	__be64 T1518_novlan;
+	__be64 T1518_loopbk;
+	/* Counts transmit frames with a length of 1519 to 1522 bytes */
+	__be64 T1522_prio_0;
+	__be64 T1522_prio_1;
+	__be64 T1522_prio_2;
+	__be64 T1522_prio_3;
+	__be64 T1522_prio_4;
+	__be64 T1522_prio_5;
+	__be64 T1522_prio_6;
+	__be64 T1522_prio_7;
+	__be64 T1522_novlan;
+	__be64 T1522_loopbk;
+	/* Transmit frames with a length of 1523 to 1548 octets */
+	__be64 T1548_prio_0;
+	__be64 T1548_prio_1;
+	__be64 T1548_prio_2;
+	__be64 T1548_prio_3;
+	__be64 T1548_prio_4;
+	__be64 T1548_prio_5;
+	__be64 T1548_prio_6;
+	__be64 T1548_prio_7;
+	__be64 T1548_novlan;
+	__be64 T1548_loopbk;
+	/* Counts transmit frames with a length of 1549 to MTU bytes */
+	__be64 T2MTU_prio_0;
+	__be64 T2MTU_prio_1;
+	__be64 T2MTU_prio_2;
+	__be64 T2MTU_prio_3;
+	__be64 T2MTU_prio_4;
+	__be64 T2MTU_prio_5;
+	__be64 T2MTU_prio_6;
+	__be64 T2MTU_prio_7;
+	__be64 T2MTU_novlan;
+	__be64 T2MTU_loopbk;
+	/* Transmit frames with a length greater than MTU octets and a good CRC. */
+	__be64 TGIANT_prio_0;
+	__be64 TGIANT_prio_1;
+	__be64 TGIANT_prio_2;
+	__be64 TGIANT_prio_3;
+	__be64 TGIANT_prio_4;
+	__be64 TGIANT_prio_5;
+	__be64 TGIANT_prio_6;
+	__be64 TGIANT_prio_7;
+	__be64 TGIANT_novlan;
+	__be64 TGIANT_loopbk;
+	/* Transmit broadcast frames with a good CRC */
+	__be64 TBCAST_prio_0;
+	__be64 TBCAST_prio_1;
+	__be64 TBCAST_prio_2;
+	__be64 TBCAST_prio_3;
+	__be64 TBCAST_prio_4;
+	__be64 TBCAST_prio_5;
+	__be64 TBCAST_prio_6;
+	__be64 TBCAST_prio_7;
+	__be64 TBCAST_novlan;
+	__be64 TBCAST_loopbk;
+	/* Transmit multicast frames with a good CRC */
+	__be64 TMCAST_prio_0;
+	__be64 TMCAST_prio_1;
+	__be64 TMCAST_prio_2;
+	__be64 TMCAST_prio_3;
+	__be64 TMCAST_prio_4;
+	__be64 TMCAST_prio_5;
+	__be64 TMCAST_prio_6;
+	__be64 TMCAST_prio_7;
+	__be64 TMCAST_novlan;
+	__be64 TMCAST_loopbk;
+	/* Transmit good frames that are neither broadcast nor multicast */
+	__be64 TTOTG_prio_0;
+	__be64 TTOTG_prio_1;
+	__be64 TTOTG_prio_2;
+	__be64 TTOTG_prio_3;
+	__be64 TTOTG_prio_4;
+	__be64 TTOTG_prio_5;
+	__be64 TTOTG_prio_6;
+	__be64 TTOTG_prio_7;
+	__be64 TTOTG_novlan;
+	__be64 TTOTG_loopbk;
+
+	/* total octets of transmitted frames, including framing characters */
+	__be64 TTTLOCT_prio_0;
+	/* total octets of transmitted frames, not including framing characters */
+	__be64 TTTLOCT_NOFRM_prio_0;
+	/* ifOutOctets */
+	__be64 TOCT_prio_0;
+
+	__be64 TTTLOCT_prio_1;
+	__be64 TTTLOCT_NOFRM_prio_1;
+	__be64 TOCT_prio_1;
+
+	__be64 TTTLOCT_prio_2;
+	__be64 TTTLOCT_NOFRM_prio_2;
+	__be64 TOCT_prio_2;
+
+	__be64 TTTLOCT_prio_3;
+	__be64 TTTLOCT_NOFRM_prio_3;
+	__be64 TOCT_prio_3;
+
+	__be64 TTTLOCT_prio_4;
+	__be64 TTTLOCT_NOFRM_prio_4;
+	__be64 TOCT_prio_4;
+
+	__be64 TTTLOCT_prio_5;
+	__be64 TTTLOCT_NOFRM_prio_5;
+	__be64 TOCT_prio_5;
+
+	__be64 TTTLOCT_prio_6;
+	__be64 TTTLOCT_NOFRM_prio_6;
+	__be64 TOCT_prio_6;
+
+	__be64 TTTLOCT_prio_7;
+	__be64 TTTLOCT_NOFRM_prio_7;
+	__be64 TOCT_prio_7;
+
+	__be64 TTTLOCT_novlan;
+	__be64 TTTLOCT_NOFRM_novlan;
+	__be64 TOCT_novlan;
+
+	__be64 TTTLOCT_loopbk;
+	__be64 TTTLOCT_NOFRM_loopbk;
+	__be64 TOCT_loopbk;
+
+	/* Total frames transmitted with a good CRC that are not aborted  */
+	__be64 TTOT_prio_0;
+	/* Total number of frames transmitted with 802.1Q encapsulation */
+	__be64 T1Q_prio_0;
+	__be64 reserved13;
+
+	__be64 TTOT_prio_1;
+	__be64 T1Q_prio_1;
+	__be64 reserved14;
+
+	__be64 TTOT_prio_2;
+	__be64 T1Q_prio_2;
+	__be64 reserved15;
+
+	__be64 TTOT_prio_3;
+	__be64 T1Q_prio_3;
+	__be64 reserved16;
+
+	__be64 TTOT_prio_4;
+	__be64 T1Q_prio_4;
+	__be64 reserved17;
+
+	__be64 TTOT_prio_5;
+	__be64 T1Q_prio_5;
+	__be64 reserved18;
+
+	__be64 TTOT_prio_6;
+	__be64 T1Q_prio_6;
+	__be64 reserved19;
+
+	__be64 TTOT_prio_7;
+	__be64 T1Q_prio_7;
+	__be64 reserved20;
+
+	__be64 TTOT_novlan;
+	__be64 T1Q_novlan;
+	__be64 reserved21;
+
+	__be64 TTOT_loopbk;
+	__be64 T1Q_loopbk;
+	__be64 reserved22;
+
+	/* Received frames with a length greater than MTU octets and a bad CRC */
+	__be32 RJBBR;
+	/* Received frames with a bad CRC that are not runts, jabbers,
+	   or alignment errors */
+	__be32 RCRC;
+	/* Received frames with SFD with a length of less than 64 octets and a
+	   bad CRC */
+	__be32 RRUNT;
+	/* Received frames with a length less than 64 octets and a good CRC */
+	__be32 RSHORT;
+	/* Total Number of Received Packets Dropped */
+	__be32 RDROP;
+	/* Drop due to overflow  */
+	__be32 RdropOvflw;
+	/* Drop due to overflow */
+	__be32 RdropLength;
+	/* Total of good frames. Does not include frames received with
+	   frame-too-long, FCS, or length errors */
+	__be32 RTOTFRMS;
+	/* Total dropped Xmited packets */
+	__be32 TDROP;
+};
+
+
+#endif
diff --git a/drivers/net/mlx4/en_resources.c b/drivers/net/mlx4/en_resources.c
new file mode 100644
index 0000000..a054520
--- /dev/null
+++ b/drivers/net/mlx4/en_resources.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/vmalloc.h>
+#include <linux/mlx4/qp.h>
+
+#include "mlx4_en.h"
+
+void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride,
+			     int is_tx, int rss, int qpn, int cqn, int srqn,
+			     struct mlx4_qp_context *context)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+
+	memset(context, 0, sizeof *context);
+	context->flags = cpu_to_be32(7 << 16 | rss << 13);
+	context->pd = cpu_to_be32(mdev->priv_pdn);
+	context->mtu_msgmax = 0xff;
+	context->rq_size_stride = 0;
+	if (is_tx)
+		context->sq_size_stride = ilog2(size) << 3 | (ilog2(stride) - 4);
+	else
+		context->sq_size_stride = 1;
+	context->usr_page = cpu_to_be32(mdev->priv_uar.index);
+	context->local_qpn = cpu_to_be32(qpn);
+	context->pri_path.ackto = 1 & 0x07;
+	context->pri_path.sched_queue = 0x83 | (priv->port - 1) << 6;
+	context->pri_path.counter_index = 0xff;
+	context->cqn_send = cpu_to_be32(cqn);
+	context->cqn_recv = cpu_to_be32(cqn);
+	context->db_rec_addr = cpu_to_be64(priv->res.db.dma << 2);
+	if (!rss)
+		context->srqn = cpu_to_be32(MLX4_EN_USE_SRQ | srqn);
+}
+
+
+int mlx4_en_map_buffer(struct mlx4_buf *buf)
+{
+	struct page **pages;
+	int i;
+
+	if (BITS_PER_LONG == 64 || buf->nbufs == 1)
+		return 0;
+
+	pages = kmalloc(sizeof *pages * buf->nbufs, GFP_KERNEL);
+	if (!pages)
+		return -ENOMEM;
+
+	for (i = 0; i < buf->nbufs; ++i)
+		pages[i] = virt_to_page(buf->page_list[i].buf);
+
+	buf->direct.buf = vmap(pages, buf->nbufs, VM_MAP, PAGE_KERNEL);
+	kfree(pages);
+	if (!buf->direct.buf)
+		return -ENOMEM;
+
+	return 0;
+}
+
+void mlx4_en_unmap_buffer(struct mlx4_buf *buf)
+{
+	if (BITS_PER_LONG == 64 || buf->nbufs == 1)
+		return;
+
+	vunmap(buf->direct.buf);
+}
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
new file mode 100644
index 0000000..6232227
--- /dev/null
+++ b/drivers/net/mlx4/en_rx.c
@@ -0,0 +1,1080 @@
+/*
+ * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/mlx4/cq.h>
+#include <linux/mlx4/qp.h>
+#include <linux/skbuff.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/vmalloc.h>
+
+#include "mlx4_en.h"
+
+static void *get_wqe(struct mlx4_en_rx_ring *ring, int n)
+{
+	int offset = n << ring->srq.wqe_shift;
+	return ring->buf + offset;
+}
+
+static void mlx4_en_srq_event(struct mlx4_srq *srq, enum mlx4_event type)
+{
+	return;
+}
+
+static int mlx4_en_get_frag_header(struct skb_frag_struct *frags, void **mac_hdr,
+				   void **ip_hdr, void **tcpudp_hdr,
+				   u64 *hdr_flags, void *priv)
+{
+	*mac_hdr = page_address(frags->page) + frags->page_offset;
+	*ip_hdr = *mac_hdr + ETH_HLEN;
+	*tcpudp_hdr = (struct tcphdr *)(*ip_hdr + sizeof(struct iphdr));
+	*hdr_flags = LRO_IPV4 | LRO_TCP;
+
+	return 0;
+}
+
+static int mlx4_en_alloc_frag(struct mlx4_en_priv *priv,
+			      struct mlx4_en_rx_desc *rx_desc,
+			      struct skb_frag_struct *skb_frags,
+			      struct mlx4_en_rx_alloc *ring_alloc,
+			      int i)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct mlx4_en_frag_info *frag_info = &priv->frag_info[i];
+	struct mlx4_en_rx_alloc *page_alloc = &ring_alloc[i];
+	struct page *page;
+	dma_addr_t dma;
+
+	if (page_alloc->offset == frag_info->last_offset) {
+		/* Allocate new page */
+		page = alloc_pages(GFP_ATOMIC | __GFP_COMP, MLX4_EN_ALLOC_ORDER);
+		if (!page)
+			return -ENOMEM;
+
+		skb_frags[i].page = page_alloc->page;
+		skb_frags[i].page_offset = page_alloc->offset;
+		page_alloc->page = page;
+		page_alloc->offset = frag_info->frag_align;
+	} else {
+		page = page_alloc->page;
+		get_page(page);
+
+		skb_frags[i].page = page;
+		skb_frags[i].page_offset = page_alloc->offset;
+		page_alloc->offset += frag_info->frag_stride;
+	}
+	dma = pci_map_single(mdev->pdev, page_address(skb_frags[i].page) +
+			     skb_frags[i].page_offset, frag_info->frag_size,
+			     PCI_DMA_FROMDEVICE);
+	rx_desc->data[i].addr = cpu_to_be64(dma);
+	return 0;
+}
+
+static int mlx4_en_init_allocator(struct mlx4_en_priv *priv,
+				  struct mlx4_en_rx_ring *ring)
+{
+	struct mlx4_en_rx_alloc *page_alloc;
+	int i;
+
+	for (i = 0; i < priv->num_frags; i++) {
+		page_alloc = &ring->page_alloc[i];
+		page_alloc->page = alloc_pages(GFP_ATOMIC | __GFP_COMP,
+					       MLX4_EN_ALLOC_ORDER);
+		if (!page_alloc->page)
+			goto out;
+
+		page_alloc->offset = priv->frag_info[i].frag_align;
+		mlx4_dbg(DRV, priv, "Initialized allocator:%d with page:%p\n",
+			 i, page_alloc->page);
+	}
+	return 0;
+
+out:
+	while (i--) {
+		page_alloc = &ring->page_alloc[i];
+		put_page(page_alloc->page);
+		page_alloc->page = NULL;
+	}
+	return -ENOMEM;
+}
+
+static void mlx4_en_destroy_allocator(struct mlx4_en_priv *priv,
+				      struct mlx4_en_rx_ring *ring)
+{
+	struct mlx4_en_rx_alloc *page_alloc;
+	int i;
+
+	for (i = 0; i < priv->num_frags; i++) {
+		page_alloc = &ring->page_alloc[i];
+		mlx4_dbg(DRV, priv, "Freeing allocator:%d count:%d\n",
+			 i, page_count(page_alloc->page));
+
+		put_page(page_alloc->page);
+		page_alloc->page = NULL;
+	}
+}
+
+
+static void mlx4_en_init_rx_desc(struct mlx4_en_priv *priv,
+				 struct mlx4_en_rx_ring *ring, int index)
+{
+	struct mlx4_en_rx_desc *rx_desc = ring->buf + ring->stride * index;
+	struct skb_frag_struct *skb_frags = ring->rx_info +
+					    (index << priv->log_rx_info);
+	int possible_frags;
+	int i;
+
+	/* Pre-link descriptor */
+	rx_desc->next.next_wqe_index = cpu_to_be16((index + 1) & ring->size_mask);
+
+	/* Set size and memtype fields */
+	for (i = 0; i < priv->num_frags; i++) {
+		skb_frags[i].size = priv->frag_info[i].frag_size;
+		rx_desc->data[i].byte_count =
+			cpu_to_be32(priv->frag_info[i].frag_size);
+		rx_desc->data[i].lkey = cpu_to_be32(priv->mdev->mr.key);
+	}
+
+	/* If the number of used fragments does not fill up the ring stride,
+	 * remaining (unused) fragments must be padded with null address/size
+	 * and a special memory key */
+	possible_frags = (ring->stride - sizeof(struct mlx4_en_rx_desc)) / DS_SIZE;
+	for (i = priv->num_frags; i < possible_frags; i++) {
+		rx_desc->data[i].byte_count = 0;
+		rx_desc->data[i].lkey = cpu_to_be32(MLX4_EN_MEMTYPE_PAD);
+		rx_desc->data[i].addr = 0;
+	}
+}
+
+
+static int mlx4_en_prepare_rx_desc(struct mlx4_en_priv *priv,
+				   struct mlx4_en_rx_ring *ring, int index)
+{
+	struct mlx4_en_rx_desc *rx_desc = ring->buf + (index * ring->stride);
+	struct skb_frag_struct *skb_frags = ring->rx_info +
+					    (index << priv->log_rx_info);
+	int i;
+
+	for (i = 0; i < priv->num_frags; i++)
+		if (mlx4_en_alloc_frag(priv, rx_desc, skb_frags, ring->page_alloc, i))
+			goto err;
+
+	return 0;
+
+err:
+	while (i--)
+		put_page(skb_frags[i].page);
+	return -ENOMEM;
+}
+
+static inline void mlx4_en_update_rx_prod_db(struct mlx4_en_rx_ring *ring)
+{
+	*ring->wqres.db.db = cpu_to_be32(ring->prod & 0xffff);
+}
+
+static int mlx4_en_fill_rx_buffers(struct mlx4_en_priv *priv)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct mlx4_en_rx_ring *ring;
+	int ring_ind;
+	int buf_ind;
+
+	for (buf_ind = 0; buf_ind < priv->prof->rx_ring_size; buf_ind++) {
+		for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++) {
+			ring = &priv->rx_ring[ring_ind];
+
+			if (mlx4_en_prepare_rx_desc(priv, ring,
+						    ring->actual_size)) {
+				if (ring->actual_size < MLX4_EN_MIN_RX_SIZE) {
+					mlx4_err(mdev, "Failed to allocate "
+						       "enough rx buffers\n");
+					return -ENOMEM;
+				} else {
+					if (netif_msg_rx_err(priv))
+						mlx4_warn(mdev,
+							  "Only %d buffers allocated\n",
+							  ring->actual_size);
+					goto out;
+				}
+			}
+			ring->actual_size++;
+			ring->prod++;
+		}
+	}
+out:
+	return 0;
+}
+
+static int mlx4_en_fill_rx_buf(struct net_device *dev,
+			       struct mlx4_en_rx_ring *ring)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	int num = 0;
+	int err;
+
+	while ((u32) (ring->prod - ring->cons) < ring->actual_size) {
+		err = mlx4_en_prepare_rx_desc(priv, ring, ring->prod &
+					      ring->size_mask);
+		if (err) {
+			if (netif_msg_rx_err(priv))
+				mlx4_warn(priv->mdev,
+					  "Failed preparing rx descriptor\n");
+			priv->port_stats.rx_alloc_failed++;
+			break;
+		}
+		++num;
+		++ring->prod;
+	}
+	if ((u32) (ring->prod - ring->cons) == ring->size)
+		ring->full = 1;
+
+	return num;
+}
+
+static void mlx4_en_free_rx_buf(struct mlx4_en_priv *priv,
+				struct mlx4_en_rx_ring *ring)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct skb_frag_struct *skb_frags;
+	struct mlx4_en_rx_desc *rx_desc;
+	dma_addr_t dma;
+	int index;
+	int nr;
+
+	mlx4_dbg(DRV, priv, "Freeing Rx buf - cons:%d prod:%d\n",
+			ring->cons, ring->prod);
+
+	/* Unmap and free Rx buffers */
+	BUG_ON((u32) (ring->prod - ring->cons) > ring->size);
+	while (ring->cons != ring->prod) {
+		index = ring->cons & ring->size_mask;
+		rx_desc = ring->buf + (index << ring->log_stride);
+		skb_frags = ring->rx_info + (index << priv->log_rx_info);
+		mlx4_dbg(DRV, priv, "Processing descriptor:%d\n", index);
+
+		for (nr = 0; nr < priv->num_frags; nr++) {
+			mlx4_dbg(DRV, priv, "Freeing fragment:%d\n", nr);
+			dma = be64_to_cpu(rx_desc->data[nr].addr);
+
+			mlx4_dbg(DRV, priv, "Unmaping buffer at dma:0x%llx\n", (u64) dma);
+			pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size,
+					 PCI_DMA_FROMDEVICE);
+			put_page(skb_frags[nr].page);
+		}
+		++ring->cons;
+	}
+}
+
+
+void mlx4_en_rx_refill(struct work_struct *work)
+{
+	struct delayed_work *delay = container_of(work, struct delayed_work, work);
+	struct mlx4_en_priv *priv = container_of(delay, struct mlx4_en_priv,
+						 refill_task);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct net_device *dev = priv->dev;
+	struct mlx4_en_rx_ring *ring;
+	int need_refill = 0;
+	int i;
+
+	mutex_lock(&mdev->state_lock);
+	if (!mdev->device_up || !priv->port_up)
+		goto out;
+
+	/* We only get here if there are no receive buffers, so we can't race
+	 * with Rx interrupts while filling buffers */
+	for (i = 0; i < priv->rx_ring_num; i++) {
+		ring = &priv->rx_ring[i];
+		if (ring->need_refill) {
+			if (mlx4_en_fill_rx_buf(dev, ring)) {
+				ring->need_refill = 0;
+				mlx4_en_update_rx_prod_db(ring);
+			} else
+				need_refill = 1;
+		}
+	}
+	if (need_refill)
+		queue_delayed_work(mdev->workqueue, &priv->refill_task, HZ);
+
+out:
+	mutex_unlock(&mdev->state_lock);
+}
+
+
+int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv,
+			   struct mlx4_en_rx_ring *ring, u32 size, u16 stride)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int err;
+	int tmp;
+
+	/* Sanity check SRQ size before proceeding */
+	if (size >= mdev->dev->caps.max_srq_wqes)
+		return -EINVAL;
+
+	ring->prod = 0;
+	ring->cons = 0;
+	ring->size = size;
+	ring->size_mask = size - 1;
+	ring->stride = stride;
+	ring->log_stride = ffs(ring->stride) - 1;
+	ring->buf_size = ring->size * ring->stride;
+
+	tmp = size * roundup_pow_of_two(MLX4_EN_MAX_RX_FRAGS *
+					sizeof(struct skb_frag_struct));
+	ring->rx_info = vmalloc(tmp);
+	if (!ring->rx_info) {
+		mlx4_err(mdev, "Failed allocating rx_info ring\n");
+		return -ENOMEM;
+	}
+	mlx4_dbg(DRV, priv, "Allocated rx_info ring at addr:%p size:%d\n",
+		 ring->rx_info, tmp);
+
+	err = mlx4_alloc_hwq_res(mdev->dev, &ring->wqres,
+				 ring->buf_size, 2 * PAGE_SIZE);
+	if (err)
+		goto err_ring;
+
+	err = mlx4_en_map_buffer(&ring->wqres.buf);
+	if (err) {
+		mlx4_err(mdev, "Failed to map RX buffer\n");
+		goto err_hwq;
+	}
+	ring->buf = ring->wqres.buf.direct.buf;
+
+	/* Configure lro mngr */
+	memset(&ring->lro, 0, sizeof(struct net_lro_mgr));
+	ring->lro.dev = priv->dev;
+	ring->lro.features = LRO_F_NAPI;
+	ring->lro.frag_align_pad = NET_IP_ALIGN;
+	ring->lro.ip_summed = CHECKSUM_UNNECESSARY;
+	ring->lro.ip_summed_aggr = CHECKSUM_UNNECESSARY;
+	ring->lro.max_desc = mdev->profile.num_lro;
+	ring->lro.max_aggr = MAX_SKB_FRAGS;
+	ring->lro.lro_arr = kzalloc(mdev->profile.num_lro *
+				    sizeof(struct net_lro_desc),
+				    GFP_KERNEL);
+	if (!ring->lro.lro_arr) {
+		mlx4_err(mdev, "Failed to allocate lro array\n");
+		goto err_map;
+	}
+	ring->lro.get_frag_header = mlx4_en_get_frag_header;
+
+	return 0;
+
+err_map:
+	mlx4_en_unmap_buffer(&ring->wqres.buf);
+err_hwq:
+	mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size);
+err_ring:
+	vfree(ring->rx_info);
+	ring->rx_info = NULL;
+	return err;
+}
+
+int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct mlx4_wqe_srq_next_seg *next;
+	struct mlx4_en_rx_ring *ring;
+	int i;
+	int ring_ind;
+	int err;
+	int stride = roundup_pow_of_two(sizeof(struct mlx4_en_rx_desc) +
+					DS_SIZE * priv->num_frags);
+	int max_gs = (stride - sizeof(struct mlx4_wqe_srq_next_seg)) / DS_SIZE;
+
+	for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++) {
+		ring = &priv->rx_ring[ring_ind];
+
+		ring->prod = 0;
+		ring->cons = 0;
+		ring->actual_size = 0;
+		ring->cqn = priv->rx_cq[ring_ind].mcq.cqn;
+
+		ring->stride = stride;
+		ring->log_stride = ffs(ring->stride) - 1;
+		ring->buf_size = ring->size * ring->stride;
+
+		memset(ring->buf, 0, ring->buf_size);
+		mlx4_en_update_rx_prod_db(ring);
+
+		/* Initailize all descriptors */
+		for (i = 0; i < ring->size; i++)
+			mlx4_en_init_rx_desc(priv, ring, i);
+
+		/* Initialize page allocators */
+		err = mlx4_en_init_allocator(priv, ring);
+		if (err) {
+			 mlx4_err(mdev, "Failed initializing ring allocator\n");
+			 goto err_allocator;
+		}
+
+		/* Fill Rx buffers */
+		ring->full = 0;
+	}
+	if (mlx4_en_fill_rx_buffers(priv))
+		goto err_buffers;
+
+	for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++) {
+		ring = &priv->rx_ring[ring_ind];
+
+		mlx4_en_update_rx_prod_db(ring);
+
+		/* Configure SRQ representing the ring */
+		ring->srq.max    = ring->size;
+		ring->srq.max_gs = max_gs;
+		ring->srq.wqe_shift = ilog2(ring->stride);
+
+		for (i = 0; i < ring->srq.max; ++i) {
+			next = get_wqe(ring, i);
+			next->next_wqe_index =
+			cpu_to_be16((i + 1) & (ring->srq.max - 1));
+		}
+
+		err = mlx4_srq_alloc(mdev->dev, mdev->priv_pdn, &ring->wqres.mtt,
+				     ring->wqres.db.dma, &ring->srq);
+		if (err){
+			mlx4_err(mdev, "Failed to allocate srq\n");
+			goto err_srq;
+		}
+		ring->srq.event = mlx4_en_srq_event;
+	}
+
+	return 0;
+
+err_srq:
+	while (ring_ind >= 0) {
+		ring = &priv->rx_ring[ring_ind];
+		mlx4_srq_free(mdev->dev, &ring->srq);
+		ring_ind--;
+	}
+
+err_buffers:
+	for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++)
+		mlx4_en_free_rx_buf(priv, &priv->rx_ring[ring_ind]);
+
+	ring_ind = priv->rx_ring_num - 1;
+err_allocator:
+	while (ring_ind >= 0) {
+		mlx4_en_destroy_allocator(priv, &priv->rx_ring[ring_ind]);
+		ring_ind--;
+	}
+	return err;
+}
+
+void mlx4_en_destroy_rx_ring(struct mlx4_en_priv *priv,
+			     struct mlx4_en_rx_ring *ring)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+
+	kfree(ring->lro.lro_arr);
+	mlx4_en_unmap_buffer(&ring->wqres.buf);
+	mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size);
+	vfree(ring->rx_info);
+	ring->rx_info = NULL;
+}
+
+void mlx4_en_deactivate_rx_ring(struct mlx4_en_priv *priv,
+				struct mlx4_en_rx_ring *ring)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+
+	mlx4_srq_free(mdev->dev, &ring->srq);
+	mlx4_en_free_rx_buf(priv, ring);
+	mlx4_en_destroy_allocator(priv, ring);
+}
+
+
+/* Unmap a completed descriptor and free unused pages */
+static int mlx4_en_complete_rx_desc(struct mlx4_en_priv *priv,
+				    struct mlx4_en_rx_desc *rx_desc,
+				    struct skb_frag_struct *skb_frags,
+				    struct skb_frag_struct *skb_frags_rx,
+				    struct mlx4_en_rx_alloc *page_alloc,
+				    int length)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct mlx4_en_frag_info *frag_info;
+	int nr;
+	dma_addr_t dma;
+
+	/* Collect used fragments while replacing them in the HW descirptors */
+	for (nr = 0; nr < priv->num_frags; nr++) {
+		frag_info = &priv->frag_info[nr];
+		if (length <= frag_info->frag_prefix_size)
+			break;
+
+		/* Save page reference in skb */
+		skb_frags_rx[nr].page = skb_frags[nr].page;
+		skb_frags_rx[nr].size = skb_frags[nr].size;
+		skb_frags_rx[nr].page_offset = skb_frags[nr].page_offset;
+		dma = be64_to_cpu(rx_desc->data[nr].addr);
+
+		/* Allocate a replacement page */
+		if (mlx4_en_alloc_frag(priv, rx_desc, skb_frags, page_alloc, nr))
+			goto fail;
+
+		/* Unmap buffer */
+		pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size,
+				 PCI_DMA_FROMDEVICE);
+	}
+	/* Adjust size of last fragment to match actual length */
+	skb_frags_rx[nr - 1].size = length -
+		priv->frag_info[nr - 1].frag_prefix_size;
+	return nr;
+
+fail:
+	/* Drop all accumulated fragments (which have already been replaced in
+	 * the descriptor) of this packet; remaining fragments are reused... */
+	while (nr > 0) {
+		nr--;
+		put_page(skb_frags_rx[nr].page);
+	}
+	return 0;
+}
+
+
+static struct sk_buff *mlx4_en_rx_skb(struct mlx4_en_priv *priv,
+				      struct mlx4_en_rx_desc *rx_desc,
+				      struct skb_frag_struct *skb_frags,
+				      struct mlx4_en_rx_alloc *page_alloc,
+				      unsigned int length)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct sk_buff *skb;
+	void *va;
+	int used_frags;
+	dma_addr_t dma;
+
+	skb = dev_alloc_skb(SMALL_PACKET_SIZE + NET_IP_ALIGN);
+	if (!skb) {
+		mlx4_dbg(RX_ERR, priv, "Failed allocating skb\n");
+		return NULL;
+	}
+	skb->dev = priv->dev;
+	skb_reserve(skb, NET_IP_ALIGN);
+	skb->len = length;
+	skb->truesize = length + sizeof(struct sk_buff);
+
+	/* Get pointer to first fragment so we could copy the headers into the
+	 * (linear part of the) skb */
+	va = page_address(skb_frags[0].page) + skb_frags[0].page_offset;
+
+	if (length <= SMALL_PACKET_SIZE) {
+		/* We are copying all relevant data to the skb - temporarily
+		 * synch buffers for the copy */
+		dma = be64_to_cpu(rx_desc->data[0].addr);
+		dma_sync_single_range_for_cpu(&mdev->pdev->dev, dma, 0,
+					      length, DMA_FROM_DEVICE);
+		skb_copy_to_linear_data(skb, va, length);
+		dma_sync_single_range_for_device(&mdev->pdev->dev, dma, 0,
+						 length, DMA_FROM_DEVICE);
+		skb->tail += length;
+	} else {
+
+		/* Move relevant fragments to skb */
+		used_frags = mlx4_en_complete_rx_desc(priv, rx_desc, skb_frags,
+						      skb_shinfo(skb)->frags,
+						      page_alloc, length);
+		skb_shinfo(skb)->nr_frags = used_frags;
+
+		/* Copy headers into the skb linear buffer */
+		memcpy(skb->data, va, HEADER_COPY_SIZE);
+		skb->tail += HEADER_COPY_SIZE;
+
+		/* Skip headers in first fragment */
+		skb_shinfo(skb)->frags[0].page_offset += HEADER_COPY_SIZE;
+
+		/* Adjust size of first fragment */
+		skb_shinfo(skb)->frags[0].size -= HEADER_COPY_SIZE;
+		skb->data_len = length - HEADER_COPY_SIZE;
+	}
+	return skb;
+}
+
+static void mlx4_en_copy_desc(struct mlx4_en_priv *priv,
+			      struct mlx4_en_rx_ring *ring,
+			      int from, int to, int num)
+{
+	struct skb_frag_struct *skb_frags_from;
+	struct skb_frag_struct *skb_frags_to;
+	struct mlx4_en_rx_desc *rx_desc_from;
+	struct mlx4_en_rx_desc *rx_desc_to;
+	int from_index, to_index;
+	int nr, i;
+
+	for (i = 0; i < num; i++) {
+		from_index = (from + i) & ring->size_mask;
+		to_index = (to + i) & ring->size_mask;
+		skb_frags_from = ring->rx_info + (from_index << priv->log_rx_info);
+		skb_frags_to = ring->rx_info + (to_index << priv->log_rx_info);
+		rx_desc_from = ring->buf + (from_index << ring->log_stride);
+		rx_desc_to = ring->buf + (to_index << ring->log_stride);
+
+		for (nr = 0; nr < priv->num_frags; nr++) {
+			skb_frags_to[nr].page = skb_frags_from[nr].page;
+			skb_frags_to[nr].page_offset = skb_frags_from[nr].page_offset;
+			rx_desc_to->data[nr].addr = rx_desc_from->data[nr].addr;
+		}
+	}
+}
+
+
+int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int budget)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct mlx4_cqe *cqe;
+	struct mlx4_en_rx_ring *ring = &priv->rx_ring[cq->ring];
+	struct skb_frag_struct *skb_frags;
+	struct skb_frag_struct lro_frags[MLX4_EN_MAX_RX_FRAGS];
+	struct mlx4_en_rx_desc *rx_desc;
+	struct sk_buff *skb;
+	int index;
+	int nr;
+	unsigned int length;
+	int polled = 0;
+	int ip_summed;
+
+	if (!priv->port_up)
+		return 0;
+
+	/* We assume a 1:1 mapping between CQEs and Rx descriptors, so Rx
+	 * descriptor offset can be deduced from the CQE index instead of
+	 * reading 'cqe->index' */
+	index = cq->mcq.cons_index & ring->size_mask;
+	cqe = &cq->buf[index];
+
+	/* Process all completed CQEs */
+	while (XNOR(cqe->owner_sr_opcode & MLX4_CQE_OWNER_MASK,
+		    cq->mcq.cons_index & cq->size)) {
+
+		skb_frags = ring->rx_info + (index << priv->log_rx_info);
+		rx_desc = ring->buf + (index << ring->log_stride);
+
+		/*
+		 * make sure we read the CQE after we read the ownership bit
+		 */
+		rmb();
+
+		/* Drop packet on bad receive or bad checksum */
+		if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) ==
+						MLX4_CQE_OPCODE_ERROR)) {
+			mlx4_err(mdev, "CQE completed in error - vendor "
+				  "syndrom:%d syndrom:%d\n",
+				  ((struct mlx4_err_cqe *) cqe)->vendor_err_syndrome,
+				  ((struct mlx4_err_cqe *) cqe)->syndrome);
+			goto next;
+		}
+		if (unlikely(cqe->badfcs_enc & MLX4_CQE_BAD_FCS)) {
+			mlx4_dbg(RX_ERR, priv, "Accepted frame with bad FCS\n");
+			goto next;
+		}
+
+		/*
+		 * Packet is OK - process it.
+		 */
+		length = be32_to_cpu(cqe->byte_cnt);
+		ring->bytes += length;
+		ring->packets++;
+
+		if (likely(priv->rx_csum)) {
+			if ((cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) &&
+			    (cqe->checksum == cpu_to_be16(0xffff))) {
+				priv->port_stats.rx_chksum_good++;
+				/* This packet is eligible for LRO if it is:
+				 * - DIX Ethernet (type interpretation)
+				 * - TCP/IP (v4)
+				 * - without IP options
+				 * - not an IP fragment */
+				if (mlx4_en_can_lro(cqe->status) &&
+				    dev->features & NETIF_F_LRO) {
+
+					nr = mlx4_en_complete_rx_desc(
+						priv, rx_desc,
+						skb_frags, lro_frags,
+						ring->page_alloc, length);
+					if (!nr)
+						goto next;
+
+					if (priv->vlgrp && (cqe->vlan_my_qpn &
+							    cpu_to_be32(MLX4_CQE_VLAN_PRESENT_MASK))) {
+						lro_vlan_hwaccel_receive_frags(
+						       &ring->lro, lro_frags,
+						       length, length,
+						       priv->vlgrp,
+						       be16_to_cpu(cqe->sl_vid),
+						       NULL, 0);
+					} else
+						lro_receive_frags(&ring->lro,
+								  lro_frags,
+								  length,
+								  length,
+								  NULL, 0);
+
+					goto next;
+				}
+
+				/* LRO not possible, complete processing here */
+				ip_summed = CHECKSUM_UNNECESSARY;
+				INC_PERF_COUNTER(priv->pstats.lro_misses);
+			} else {
+				ip_summed = CHECKSUM_NONE;
+				priv->port_stats.rx_chksum_none++;
+			}
+		} else {
+			ip_summed = CHECKSUM_NONE;
+			priv->port_stats.rx_chksum_none++;
+		}
+
+		skb = mlx4_en_rx_skb(priv, rx_desc, skb_frags,
+				     ring->page_alloc, length);
+		if (!skb) {
+			priv->stats.rx_dropped++;
+			goto next;
+		}
+
+		skb->ip_summed = ip_summed;
+		skb->protocol = eth_type_trans(skb, dev);
+
+		/* Push it up the stack */
+		if (priv->vlgrp && (be32_to_cpu(cqe->vlan_my_qpn) &
+				    MLX4_CQE_VLAN_PRESENT_MASK)) {
+			vlan_hwaccel_receive_skb(skb, priv->vlgrp,
+						be16_to_cpu(cqe->sl_vid));
+		} else
+			netif_receive_skb(skb);
+
+		dev->last_rx = jiffies;
+
+next:
+		++cq->mcq.cons_index;
+		index = (cq->mcq.cons_index) & ring->size_mask;
+		cqe = &cq->buf[index];
+		if (++polled == budget) {
+			/* We are here because we reached the NAPI budget -
+			 * flush only pending LRO sessions */
+			lro_flush_all(&ring->lro);
+			goto out;
+		}
+	}
+
+	/* If CQ is empty flush all LRO sessions unconditionally */
+	lro_flush_all(&ring->lro);
+
+out:
+	AVG_PERF_COUNTER(priv->pstats.rx_coal_avg, polled);
+	mlx4_cq_set_ci(&cq->mcq);
+	wmb(); /* ensure HW sees CQ consumer before we post new buffers */
+	ring->cons = cq->mcq.cons_index;
+	ring->prod += polled; /* Polled descriptors were realocated in place */
+	if (unlikely(!ring->full)) {
+		mlx4_en_copy_desc(priv, ring, ring->cons - polled,
+				  ring->prod - polled, polled);
+		mlx4_en_fill_rx_buf(dev, ring);
+	}
+	mlx4_en_update_rx_prod_db(ring);
+	return polled;
+}
+
+
+void mlx4_en_rx_irq(struct mlx4_cq *mcq)
+{
+	struct mlx4_en_cq *cq = container_of(mcq, struct mlx4_en_cq, mcq);
+	struct mlx4_en_priv *priv = netdev_priv(cq->dev);
+
+	if (priv->port_up)
+		netif_rx_schedule(cq->dev, &cq->napi);
+	else
+		mlx4_en_arm_cq(priv, cq);
+}
+
+/* Rx CQ polling - called by NAPI */
+int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget)
+{
+	struct mlx4_en_cq *cq = container_of(napi, struct mlx4_en_cq, napi);
+	struct net_device *dev = cq->dev;
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	int done;
+
+	done = mlx4_en_process_rx_cq(dev, cq, budget);
+
+	/* If we used up all the quota - we're probably not done yet... */
+	if (done == budget)
+		INC_PERF_COUNTER(priv->pstats.napi_quota);
+	else {
+		/* Done for now */
+		netif_rx_complete(dev, napi);
+		mlx4_en_arm_cq(priv, cq);
+	}
+	return done;
+}
+
+
+/* Calculate the last offset position that accomodates a full fragment
+ * (assuming fagment size = stride-align) */
+static int mlx4_en_last_alloc_offset(struct mlx4_en_priv *priv, u16 stride, u16 align)
+{
+	u16 res = MLX4_EN_ALLOC_SIZE % stride;
+	u16 offset = MLX4_EN_ALLOC_SIZE - stride - res + align;
+
+	mlx4_dbg(DRV, priv, "Calculated last offset for stride:%d align:%d "
+			    "res:%d offset:%d\n", stride, align, res, offset);
+	return offset;
+}
+
+
+static int frag_sizes[] = {
+	FRAG_SZ0,
+	FRAG_SZ1,
+	FRAG_SZ2,
+	FRAG_SZ3
+};
+
+void mlx4_en_calc_rx_buf(struct net_device *dev)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	int eff_mtu = dev->mtu + ETH_HLEN + VLAN_HLEN + ETH_LLC_SNAP_SIZE;
+	int buf_size = 0;
+	int i = 0;
+
+	while (buf_size < eff_mtu) {
+		priv->frag_info[i].frag_size =
+			(eff_mtu > buf_size + frag_sizes[i]) ?
+				frag_sizes[i] : eff_mtu - buf_size;
+		priv->frag_info[i].frag_prefix_size = buf_size;
+		if (!i)	{
+			priv->frag_info[i].frag_align = NET_IP_ALIGN;
+			priv->frag_info[i].frag_stride =
+				ALIGN(frag_sizes[i] + NET_IP_ALIGN, SMP_CACHE_BYTES);
+		} else {
+			priv->frag_info[i].frag_align = 0;
+			priv->frag_info[i].frag_stride =
+				ALIGN(frag_sizes[i], SMP_CACHE_BYTES);
+		}
+		priv->frag_info[i].last_offset = mlx4_en_last_alloc_offset(
+						priv, priv->frag_info[i].frag_stride,
+						priv->frag_info[i].frag_align);
+		buf_size += priv->frag_info[i].frag_size;
+		i++;
+	}
+
+	priv->num_frags = i;
+	priv->rx_skb_size = eff_mtu;
+	priv->log_rx_info = ROUNDUP_LOG2(i * sizeof(struct skb_frag_struct));
+
+	mlx4_dbg(DRV, priv, "Rx buffer scatter-list (effective-mtu:%d "
+		  "num_frags:%d):\n", eff_mtu, priv->num_frags);
+	for (i = 0; i < priv->num_frags; i++) {
+		mlx4_dbg(DRV, priv, "  frag:%d - size:%d prefix:%d align:%d "
+				"stride:%d last_offset:%d\n", i,
+				priv->frag_info[i].frag_size,
+				priv->frag_info[i].frag_prefix_size,
+				priv->frag_info[i].frag_align,
+				priv->frag_info[i].frag_stride,
+				priv->frag_info[i].last_offset);
+	}
+}
+
+/* RSS related functions */
+
+/* Calculate rss size and map each entry in rss table to rx ring */
+void mlx4_en_set_default_rss_map(struct mlx4_en_priv *priv,
+				 struct mlx4_en_rss_map *rss_map,
+				 int num_entries, int num_rings)
+{
+	int i;
+
+	rss_map->size = roundup_pow_of_two(num_entries);
+	mlx4_dbg(DRV, priv, "Setting default RSS map of %d entires\n",
+		 rss_map->size);
+
+	for (i = 0; i < rss_map->size; i++) {
+		rss_map->map[i] = i % num_rings;
+		mlx4_dbg(DRV, priv, "Entry %d ---> ring %d\n", i, rss_map->map[i]);
+	}
+}
+
+static void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event)
+{
+    return;
+}
+
+
+static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv,
+				 int qpn, int srqn, int cqn,
+				 enum mlx4_qp_state *state,
+				 struct mlx4_qp *qp)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct mlx4_qp_context *context;
+	int err = 0;
+
+	context = kmalloc(sizeof *context , GFP_KERNEL);
+	if (!context) {
+		mlx4_err(mdev, "Failed to allocate qp context\n");
+		return -ENOMEM;
+	}
+
+	err = mlx4_qp_alloc(mdev->dev, qpn, qp);
+	if (err) {
+		mlx4_err(mdev, "Failed to allocate qp #%d\n", qpn);
+		goto out;
+		return err;
+	}
+	qp->event = mlx4_en_sqp_event;
+
+	memset(context, 0, sizeof *context);
+	mlx4_en_fill_qp_context(priv, 0, 0, 0, 0, qpn, cqn, srqn, context);
+
+	err = mlx4_qp_to_ready(mdev->dev, &priv->res.mtt, context, qp, state);
+	if (err) {
+		mlx4_qp_remove(mdev->dev, qp);
+		mlx4_qp_free(mdev->dev, qp);
+	}
+out:
+	kfree(context);
+	return err;
+}
+
+/* Allocate rx qp's and configure them according to rss map */
+int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct mlx4_en_rss_map *rss_map = &priv->rss_map;
+	struct mlx4_qp_context context;
+	struct mlx4_en_rss_context *rss_context;
+	void *ptr;
+	int rss_xor = mdev->profile.rss_xor;
+	u8 rss_mask = mdev->profile.rss_mask;
+	int i, srqn, qpn, cqn;
+	int err = 0;
+	int good_qps = 0;
+
+	mlx4_dbg(DRV, priv, "Configuring rss steering for port %u\n", priv->port);
+	err = mlx4_qp_reserve_range(mdev->dev, rss_map->size,
+				    rss_map->size, &rss_map->base_qpn);
+	if (err) {
+		mlx4_err(mdev, "Failed reserving %d qps for port %u\n",
+			 rss_map->size, priv->port);
+		return err;
+	}
+
+	for (i = 0; i < rss_map->size; i++) {
+		cqn = priv->rx_ring[rss_map->map[i]].cqn;
+		srqn = priv->rx_ring[rss_map->map[i]].srq.srqn;
+		qpn = rss_map->base_qpn + i;
+		err = mlx4_en_config_rss_qp(priv, qpn, srqn, cqn,
+					    &rss_map->state[i],
+					    &rss_map->qps[i]);
+		if (err)
+			goto rss_err;
+
+		++good_qps;
+	}
+
+	/* Configure RSS indirection qp */
+	err = mlx4_qp_reserve_range(mdev->dev, 1, 1, &priv->base_qpn);
+	if (err) {
+		mlx4_err(mdev, "Failed to reserve range for RSS "
+			       "indirection qp\n");
+		goto rss_err;
+	}
+	err = mlx4_qp_alloc(mdev->dev, priv->base_qpn, &rss_map->indir_qp);
+	if (err) {
+		mlx4_err(mdev, "Failed to allocate RSS indirection QP\n");
+		goto reserve_err;
+	}
+	rss_map->indir_qp.event = mlx4_en_sqp_event;
+	mlx4_en_fill_qp_context(priv, 0, 0, 0, 1, priv->base_qpn,
+				priv->rx_ring[0].cqn, 0, &context);
+
+	ptr = ((void *) &context) + 0x3c;
+	rss_context = (struct mlx4_en_rss_context *) ptr;
+	rss_context->base_qpn = cpu_to_be32(ilog2(rss_map->size) << 24 |
+					    (rss_map->base_qpn));
+	rss_context->default_qpn = cpu_to_be32(rss_map->base_qpn);
+	rss_context->hash_fn = rss_xor & 0x3;
+	rss_context->flags = rss_mask << 2;
+
+	err = mlx4_qp_to_ready(mdev->dev, &priv->res.mtt, &context,
+			       &rss_map->indir_qp, &rss_map->indir_state);
+	if (err)
+		goto indir_err;
+
+	return 0;
+
+indir_err:
+	mlx4_qp_modify(mdev->dev, NULL, rss_map->indir_state,
+		       MLX4_QP_STATE_RST, NULL, 0, 0, &rss_map->indir_qp);
+	mlx4_qp_remove(mdev->dev, &rss_map->indir_qp);
+	mlx4_qp_free(mdev->dev, &rss_map->indir_qp);
+reserve_err:
+	mlx4_qp_release_range(mdev->dev, priv->base_qpn, 1);
+rss_err:
+	for (i = 0; i < good_qps; i++) {
+		mlx4_qp_modify(mdev->dev, NULL, rss_map->state[i],
+			       MLX4_QP_STATE_RST, NULL, 0, 0, &rss_map->qps[i]);
+		mlx4_qp_remove(mdev->dev, &rss_map->qps[i]);
+		mlx4_qp_free(mdev->dev, &rss_map->qps[i]);
+	}
+	mlx4_qp_release_range(mdev->dev, rss_map->base_qpn, rss_map->size);
+	return err;
+}
+
+void mlx4_en_release_rss_steer(struct mlx4_en_priv *priv)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct mlx4_en_rss_map *rss_map = &priv->rss_map;
+	int i;
+
+	mlx4_qp_modify(mdev->dev, NULL, rss_map->indir_state,
+		       MLX4_QP_STATE_RST, NULL, 0, 0, &rss_map->indir_qp);
+	mlx4_qp_remove(mdev->dev, &rss_map->indir_qp);
+	mlx4_qp_free(mdev->dev, &rss_map->indir_qp);
+	mlx4_qp_release_range(mdev->dev, priv->base_qpn, 1);
+
+	for (i = 0; i < rss_map->size; i++) {
+		mlx4_qp_modify(mdev->dev, NULL, rss_map->state[i],
+			       MLX4_QP_STATE_RST, NULL, 0, 0, &rss_map->qps[i]);
+		mlx4_qp_remove(mdev->dev, &rss_map->qps[i]);
+		mlx4_qp_free(mdev->dev, &rss_map->qps[i]);
+	}
+	mlx4_qp_release_range(mdev->dev, rss_map->base_qpn, rss_map->size);
+}
+
+
+
+
+
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
new file mode 100644
index 0000000..8592f8f
--- /dev/null
+++ b/drivers/net/mlx4/en_tx.c
@@ -0,0 +1,820 @@
+/*
+ * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <asm/page.h>
+#include <linux/mlx4/cq.h>
+#include <linux/mlx4/qp.h>
+#include <linux/skbuff.h>
+#include <linux/if_vlan.h>
+#include <linux/vmalloc.h>
+
+#include "mlx4_en.h"
+
+enum {
+	MAX_INLINE = 104, /* 128 - 16 - 4 - 4 */
+};
+
+static int inline_thold __read_mostly = MAX_INLINE;
+
+module_param_named(inline_thold, inline_thold, int, 0444);
+MODULE_PARM_DESC(inline_thold, "treshold for using inline data");
+
+int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv,
+			   struct mlx4_en_tx_ring *ring, u32 size,
+			   u16 stride)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int tmp;
+	int err;
+
+	ring->size = size;
+	ring->size_mask = size - 1;
+	ring->stride = stride;
+
+	inline_thold = min(inline_thold, MAX_INLINE);
+
+	spin_lock_init(&ring->comp_lock);
+
+	tmp = size * sizeof(struct mlx4_en_tx_info);
+	ring->tx_info = vmalloc(tmp);
+	if (!ring->tx_info) {
+		mlx4_err(mdev, "Failed allocating tx_info ring\n");
+		return -ENOMEM;
+	}
+	mlx4_dbg(DRV, priv, "Allocated tx_info ring at addr:%p size:%d\n",
+		 ring->tx_info, tmp);
+
+	ring->bounce_buf = kmalloc(MAX_DESC_SIZE, GFP_KERNEL);
+	if (!ring->bounce_buf) {
+		mlx4_err(mdev, "Failed allocating bounce buffer\n");
+		err = -ENOMEM;
+		goto err_tx;
+	}
+	ring->buf_size = ALIGN(size * ring->stride, MLX4_EN_PAGE_SIZE);
+
+	err = mlx4_alloc_hwq_res(mdev->dev, &ring->wqres, ring->buf_size,
+				 2 * PAGE_SIZE);
+	if (err) {
+		mlx4_err(mdev, "Failed allocating hwq resources\n");
+		goto err_bounce;
+	}
+
+	err = mlx4_en_map_buffer(&ring->wqres.buf);
+	if (err) {
+		mlx4_err(mdev, "Failed to map TX buffer\n");
+		goto err_hwq_res;
+	}
+
+	ring->buf = ring->wqres.buf.direct.buf;
+
+	mlx4_dbg(DRV, priv, "Allocated TX ring (addr:%p) - buf:%p size:%d "
+		 "buf_size:%d dma:%llx\n", ring, ring->buf, ring->size,
+		 ring->buf_size, (unsigned long long) ring->wqres.buf.direct.map);
+
+	err = mlx4_qp_reserve_range(mdev->dev, 1, 1, &ring->qpn);
+	if (err) {
+		mlx4_err(mdev, "Failed reserving qp for tx ring.\n");
+		goto err_map;
+	}
+
+	err = mlx4_qp_alloc(mdev->dev, ring->qpn, &ring->qp);
+	if (err) {
+		mlx4_err(mdev, "Failed allocating qp %d\n", ring->qpn);
+		goto err_reserve;
+	}
+
+	return 0;
+
+err_reserve:
+	mlx4_qp_release_range(mdev->dev, ring->qpn, 1);
+err_map:
+	mlx4_en_unmap_buffer(&ring->wqres.buf);
+err_hwq_res:
+	mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size);
+err_bounce:
+	kfree(ring->bounce_buf);
+	ring->bounce_buf = NULL;
+err_tx:
+	vfree(ring->tx_info);
+	ring->tx_info = NULL;
+	return err;
+}
+
+void mlx4_en_destroy_tx_ring(struct mlx4_en_priv *priv,
+			     struct mlx4_en_tx_ring *ring)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	mlx4_dbg(DRV, priv, "Destroying tx ring, qpn: %d\n", ring->qpn);
+
+	mlx4_qp_remove(mdev->dev, &ring->qp);
+	mlx4_qp_free(mdev->dev, &ring->qp);
+	mlx4_qp_release_range(mdev->dev, ring->qpn, 1);
+	mlx4_en_unmap_buffer(&ring->wqres.buf);
+	mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size);
+	kfree(ring->bounce_buf);
+	ring->bounce_buf = NULL;
+	vfree(ring->tx_info);
+	ring->tx_info = NULL;
+}
+
+int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv,
+			     struct mlx4_en_tx_ring *ring,
+			     int cq, int srqn)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int err;
+
+	ring->cqn = cq;
+	ring->prod = 0;
+	ring->cons = 0xffffffff;
+	ring->last_nr_txbb = 1;
+	ring->poll_cnt = 0;
+	ring->blocked = 0;
+	memset(ring->tx_info, 0, ring->size * sizeof(struct mlx4_en_tx_info));
+	memset(ring->buf, 0, ring->buf_size);
+
+	ring->qp_state = MLX4_QP_STATE_RST;
+	ring->doorbell_qpn = swab32(ring->qp.qpn << 8);
+
+	mlx4_en_fill_qp_context(priv, ring->size, ring->stride, 1, 0, ring->qpn,
+				ring->cqn, srqn, &ring->context);
+
+	err = mlx4_qp_to_ready(mdev->dev, &ring->wqres.mtt, &ring->context,
+			       &ring->qp, &ring->qp_state);
+
+	return err;
+}
+
+void mlx4_en_deactivate_tx_ring(struct mlx4_en_priv *priv,
+				struct mlx4_en_tx_ring *ring)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+
+	mlx4_qp_modify(mdev->dev, NULL, ring->qp_state,
+		       MLX4_QP_STATE_RST, NULL, 0, 0, &ring->qp);
+}
+
+
+static u32 mlx4_en_free_tx_desc(struct mlx4_en_priv *priv,
+				struct mlx4_en_tx_ring *ring,
+				int index, u8 owner)
+{
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct mlx4_en_tx_info *tx_info = &ring->tx_info[index];
+	struct mlx4_en_tx_desc *tx_desc = ring->buf + index * TXBB_SIZE;
+	struct mlx4_wqe_data_seg *data = (void *) tx_desc + tx_info->data_offset;
+	struct sk_buff *skb = tx_info->skb;
+	struct skb_frag_struct *frag;
+	void *end = ring->buf + ring->buf_size;
+	int frags = skb_shinfo(skb)->nr_frags;
+	int i;
+	__be32 *ptr = (__be32 *)tx_desc;
+	__be32 stamp = cpu_to_be32(STAMP_VAL | (!!owner << STAMP_SHIFT));
+
+	/* Optimize the common case when there are no wraparounds */
+	if (likely((void *) tx_desc + tx_info->nr_txbb * TXBB_SIZE <= end)) {
+		if (tx_info->linear) {
+			pci_unmap_single(mdev->pdev,
+					 (dma_addr_t) be64_to_cpu(data->addr),
+					 be32_to_cpu(data->byte_count),
+					 PCI_DMA_TODEVICE);
+			++data;
+		}
+
+		for (i = 0; i < frags; i++) {
+			frag = &skb_shinfo(skb)->frags[i];
+			pci_unmap_page(mdev->pdev,
+				       (dma_addr_t) be64_to_cpu(data[i].addr),
+				       frag->size, PCI_DMA_TODEVICE);
+		}
+		/* Stamp the freed descriptor */
+		for (i = 0; i < tx_info->nr_txbb * TXBB_SIZE; i += STAMP_STRIDE) {
+			*ptr = stamp;
+			ptr += STAMP_DWORDS;
+		}
+
+	} else {
+		if ((void *) data >= end) {
+			data = (struct mlx4_wqe_data_seg *)
+					(ring->buf + ((void *) data - end));
+		}
+
+		if (tx_info->linear) {
+			pci_unmap_single(mdev->pdev,
+					 (dma_addr_t) be64_to_cpu(data->addr),
+					 be32_to_cpu(data->byte_count),
+					 PCI_DMA_TODEVICE);
+			++data;
+		}
+
+		for (i = 0; i < frags; i++) {
+			/* Check for wraparound before unmapping */
+			if ((void *) data >= end)
+				data = (struct mlx4_wqe_data_seg *) ring->buf;
+			frag = &skb_shinfo(skb)->frags[i];
+			pci_unmap_page(mdev->pdev,
+					(dma_addr_t) be64_to_cpu(data->addr),
+					 frag->size, PCI_DMA_TODEVICE);
+		}
+		/* Stamp the freed descriptor */
+		for (i = 0; i < tx_info->nr_txbb * TXBB_SIZE; i += STAMP_STRIDE) {
+			*ptr = stamp;
+			ptr += STAMP_DWORDS;
+			if ((void *) ptr >= end) {
+				ptr = ring->buf;
+				stamp ^= cpu_to_be32(0x80000000);
+			}
+		}
+
+	}
+	dev_kfree_skb_any(skb);
+	return tx_info->nr_txbb;
+}
+
+
+int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	int cnt = 0;
+
+	/* Skip last polled descriptor */
+	ring->cons += ring->last_nr_txbb;
+	mlx4_dbg(DRV, priv, "Freeing Tx buf - cons:0x%x prod:0x%x\n",
+		 ring->cons, ring->prod);
+
+	if ((u32) (ring->prod - ring->cons) > ring->size) {
+		if (netif_msg_tx_err(priv))
+			mlx4_warn(priv->mdev, "Tx consumer passed producer!\n");
+		return 0;
+	}
+
+	while (ring->cons != ring->prod) {
+		ring->last_nr_txbb = mlx4_en_free_tx_desc(priv, ring,
+						ring->cons & ring->size_mask,
+						!!(ring->cons & ring->size));
+		ring->cons += ring->last_nr_txbb;
+		cnt++;
+	}
+
+	if (cnt)
+		mlx4_dbg(DRV, priv, "Freed %d uncompleted tx descriptors\n", cnt);
+
+	return cnt;
+}
+
+void mlx4_en_set_prio_map(struct mlx4_en_priv *priv, u16 *prio_map, u32 ring_num)
+{
+	int block = 8 / ring_num;
+	int extra = 8 - (block * ring_num);
+	int num = 0;
+	u16 ring = 1;
+	int prio;
+
+	if (ring_num == 1) {
+		for (prio = 0; prio < 8; prio++)
+			prio_map[prio] = 0;
+		return;
+	}
+
+	for (prio = 0; prio < 8; prio++) {
+		if (extra && (num == block + 1)) {
+			ring++;
+			num = 0;
+			extra--;
+		} else if (!extra && (num == block)) {
+			ring++;
+			num = 0;
+		}
+		prio_map[prio] = ring;
+		mlx4_dbg(DRV, priv, " prio:%d --> ring:%d\n", prio, ring);
+		num++;
+	}
+}
+
+static void mlx4_en_process_tx_cq(struct net_device *dev, struct mlx4_en_cq *cq)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_cq *mcq = &cq->mcq;
+	struct mlx4_en_tx_ring *ring = &priv->tx_ring[cq->ring];
+	struct mlx4_cqe *cqe = cq->buf;
+	u16 index;
+	u16 new_index;
+	u32 txbbs_skipped = 0;
+	u32 cq_last_sav;
+
+	/* index always points to the first TXBB of the last polled descriptor */
+	index = ring->cons & ring->size_mask;
+	new_index = be16_to_cpu(cqe->wqe_index) & ring->size_mask;
+	if (index == new_index)
+		return;
+
+	if (!priv->port_up)
+		return;
+
+	/*
+	 * We use a two-stage loop:
+	 * - the first samples the HW-updated CQE
+	 * - the second frees TXBBs until the last sample
+	 * This lets us amortize CQE cache misses, while still polling the CQ
+	 * until is quiescent.
+	 */
+	cq_last_sav = mcq->cons_index;
+	do {
+		do {
+			/* Skip over last polled CQE */
+			index = (index + ring->last_nr_txbb) & ring->size_mask;
+			txbbs_skipped += ring->last_nr_txbb;
+
+			/* Poll next CQE */
+			ring->last_nr_txbb = mlx4_en_free_tx_desc(
+						priv, ring, index,
+						!!((ring->cons + txbbs_skipped) &
+						   ring->size));
+			++mcq->cons_index;
+
+		} while (index != new_index);
+
+		new_index = be16_to_cpu(cqe->wqe_index) & ring->size_mask;
+	} while (index != new_index);
+	AVG_PERF_COUNTER(priv->pstats.tx_coal_avg,
+			 (u32) (mcq->cons_index - cq_last_sav));
+
+	/*
+	 * To prevent CQ overflow we first update CQ consumer and only then
+	 * the ring consumer.
+	 */
+	mlx4_cq_set_ci(mcq);
+	wmb();
+	ring->cons += txbbs_skipped;
+
+	/* Wakeup Tx queue if this ring stopped it */
+	if (unlikely(ring->blocked)) {
+		if (((u32) (ring->prod - ring->cons) <=
+		     ring->size - HEADROOM - MAX_DESC_TXBBS) && !cq->armed) {
+
+			/* TODO: support multiqueue netdevs. Currently, we block
+			 * when *any* ring is full. Note that:
+			 * - 2 Tx rings can unblock at the same time and call
+			 *   netif_wake_queue(), which is OK since this
+			 *   operation is idempotent.
+			 * - We might wake the queue just after another ring
+			 *   stopped it. This is no big deal because the next
+			 *   transmission on that ring would stop the queue.
+			 */
+			ring->blocked = 0;
+			netif_wake_queue(dev);
+			priv->port_stats.wake_queue++;
+		}
+	}
+}
+
+void mlx4_en_tx_irq(struct mlx4_cq *mcq)
+{
+	struct mlx4_en_cq *cq = container_of(mcq, struct mlx4_en_cq, mcq);
+	struct mlx4_en_priv *priv = netdev_priv(cq->dev);
+	struct mlx4_en_tx_ring *ring = &priv->tx_ring[cq->ring];
+
+	spin_lock_irq(&ring->comp_lock);
+	cq->armed = 0;
+	mlx4_en_process_tx_cq(cq->dev, cq);
+	if (ring->blocked)
+		mlx4_en_arm_cq(priv, cq);
+	else
+		mod_timer(&cq->timer, jiffies + 1);
+	spin_unlock_irq(&ring->comp_lock);
+}
+
+
+void mlx4_en_poll_tx_cq(unsigned long data)
+{
+	struct mlx4_en_cq *cq = (struct mlx4_en_cq *) data;
+	struct mlx4_en_priv *priv = netdev_priv(cq->dev);
+	struct mlx4_en_tx_ring *ring = &priv->tx_ring[cq->ring];
+	u32 inflight;
+
+	INC_PERF_COUNTER(priv->pstats.tx_poll);
+
+	netif_tx_lock(priv->dev);
+	spin_lock_irq(&ring->comp_lock);
+	mlx4_en_process_tx_cq(cq->dev, cq);
+	inflight = (u32) (ring->prod - ring->cons - ring->last_nr_txbb);
+
+	/* If there are still packets in flight and the timer has not already
+	 * been scheduled by the Tx routine then schedule it here to guarantee
+	 * completion processing of these packets */
+	if (inflight && priv->port_up)
+		mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT);
+
+	spin_unlock_irq(&ring->comp_lock);
+	netif_tx_unlock(priv->dev);
+}
+
+static struct mlx4_en_tx_desc *mlx4_en_bounce_to_desc(struct mlx4_en_priv *priv,
+						      struct mlx4_en_tx_ring *ring,
+						      u32 index,
+						      unsigned int desc_size)
+{
+	u32 copy = (ring->size - index) * TXBB_SIZE;
+	int i;
+
+	for (i = desc_size - copy - 4; i >= 0; i -= 4) {
+		if ((i & (TXBB_SIZE - 1)) == 0)
+			wmb();
+
+		*((u32 *) (ring->buf + i)) =
+			*((u32 *) (ring->bounce_buf + copy + i));
+	}
+
+	for (i = copy - 4; i >= 4 ; i -= 4) {
+		if ((i & (TXBB_SIZE - 1)) == 0)
+			wmb();
+
+		*((u32 *) (ring->buf + index * TXBB_SIZE + i)) =
+			*((u32 *) (ring->bounce_buf + i));
+	}
+
+	/* Return real descriptor location */
+	return ring->buf + index * TXBB_SIZE;
+}
+
+static inline void mlx4_en_xmit_poll(struct mlx4_en_priv *priv, int tx_ind)
+{
+	struct mlx4_en_cq *cq = &priv->tx_cq[tx_ind];
+	struct mlx4_en_tx_ring *ring = &priv->tx_ring[tx_ind];
+
+	/* If we don't have a pending timer, set one up to catch our recent
+	   post in case the interface becomes idle */
+	if (!timer_pending(&cq->timer))
+		mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT);
+
+	/* Poll the CQ every mlx4_en_TX_MODER_POLL packets */
+	if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0)
+		mlx4_en_process_tx_cq(priv->dev, cq);
+}
+
+static void *get_frag_ptr(struct sk_buff *skb)
+{
+	struct skb_frag_struct *frag =  &skb_shinfo(skb)->frags[0];
+	struct page *page = frag->page;
+	void *ptr;
+
+	ptr = page_address(page);
+	if (unlikely(!ptr))
+		return NULL;
+
+	return ptr + frag->page_offset;
+}
+
+static int is_inline(struct sk_buff *skb, void **pfrag)
+{
+	void *ptr;
+
+	if (inline_thold && !skb_is_gso(skb) && skb->len <= inline_thold) {
+		if (skb_shinfo(skb)->nr_frags == 1) {
+			ptr = get_frag_ptr(skb);
+			if (unlikely(!ptr))
+				return 0;
+
+			if (pfrag)
+				*pfrag = ptr;
+
+			return 1;
+		} else if (unlikely(skb_shinfo(skb)->nr_frags))
+			return 0;
+		else
+			return 1;
+	}
+
+	return 0;
+}
+
+static int inline_size(struct sk_buff *skb)
+{
+	if (skb->len + CTRL_SIZE + sizeof(struct mlx4_wqe_inline_seg)
+	    <= MLX4_INLINE_ALIGN)
+		return ALIGN(skb->len + CTRL_SIZE +
+			     sizeof(struct mlx4_wqe_inline_seg), 16);
+	else
+		return ALIGN(skb->len + CTRL_SIZE + 2 *
+			     sizeof(struct mlx4_wqe_inline_seg), 16);
+}
+
+static int get_real_size(struct sk_buff *skb, struct net_device *dev,
+			 int *lso_header_size)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	int real_size;
+
+	if (skb_is_gso(skb)) {
+		*lso_header_size = skb_transport_offset(skb) + tcp_hdrlen(skb);
+		real_size = CTRL_SIZE + skb_shinfo(skb)->nr_frags * DS_SIZE +
+			ALIGN(*lso_header_size + 4, DS_SIZE);
+		if (unlikely(*lso_header_size != skb_headlen(skb))) {
+			/* We add a segment for the skb linear buffer only if
+			 * it contains data */
+			if (*lso_header_size < skb_headlen(skb))
+				real_size += DS_SIZE;
+			else {
+				if (netif_msg_tx_err(priv))
+					mlx4_warn(mdev, "Non-linear headers\n");
+				dev_kfree_skb_any(skb);
+				return 0;
+			}
+		}
+		if (unlikely(*lso_header_size > MAX_LSO_HDR_SIZE)) {
+			if (netif_msg_tx_err(priv))
+				mlx4_warn(mdev, "LSO header size too big\n");
+			dev_kfree_skb_any(skb);
+			return 0;
+		}
+	} else {
+		*lso_header_size = 0;
+		if (!is_inline(skb, NULL))
+			real_size = CTRL_SIZE + (skb_shinfo(skb)->nr_frags + 1) * DS_SIZE;
+		else
+			real_size = inline_size(skb);
+	}
+
+	return real_size;
+}
+
+static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc, struct sk_buff *skb,
+			     int real_size, u16 *vlan_tag, int tx_ind, void *fragptr)
+{
+	struct mlx4_wqe_inline_seg *inl = &tx_desc->inl;
+	int spc = MLX4_INLINE_ALIGN - CTRL_SIZE - sizeof *inl;
+
+	if (skb->len <= spc) {
+		inl->byte_count = cpu_to_be32(1 << 31 | skb->len);
+		skb_copy_from_linear_data(skb, inl + 1, skb_headlen(skb));
+		if (skb_shinfo(skb)->nr_frags)
+			memcpy(((void *)(inl + 1)) + skb_headlen(skb), fragptr,
+			       skb_shinfo(skb)->frags[0].size);
+
+	} else {
+		inl->byte_count = cpu_to_be32(1 << 31 | spc);
+		if (skb_headlen(skb) <= spc) {
+			skb_copy_from_linear_data(skb, inl + 1, skb_headlen(skb));
+			if (skb_headlen(skb) < spc) {
+				memcpy(((void *)(inl + 1)) + skb_headlen(skb),
+					fragptr, spc - skb_headlen(skb));
+				fragptr +=  spc - skb_headlen(skb);
+			}
+			inl = (void *) (inl + 1) + spc;
+			memcpy(((void *)(inl + 1)), fragptr, skb->len - spc);
+		} else {
+			skb_copy_from_linear_data(skb, inl + 1, spc);
+			inl = (void *) (inl + 1) + spc;
+			skb_copy_from_linear_data_offset(skb, spc, inl + 1,
+					skb_headlen(skb) - spc);
+			if (skb_shinfo(skb)->nr_frags)
+				memcpy(((void *)(inl + 1)) + skb_headlen(skb) - spc,
+					fragptr, skb_shinfo(skb)->frags[0].size);
+		}
+
+		wmb();
+		inl->byte_count = cpu_to_be32(1 << 31 | (skb->len - spc));
+	}
+	tx_desc->ctrl.vlan_tag = cpu_to_be16(*vlan_tag);
+	tx_desc->ctrl.ins_vlan = MLX4_WQE_CTRL_INS_VLAN * !!(*vlan_tag);
+	tx_desc->ctrl.fence_size = (real_size / 16) & 0x3f;
+}
+
+static int get_vlan_info(struct mlx4_en_priv *priv, struct sk_buff *skb,
+			 u16 *vlan_tag)
+{
+	int tx_ind;
+
+	/* Obtain VLAN information if present */
+	if (priv->vlgrp && vlan_tx_tag_present(skb)) {
+		*vlan_tag = vlan_tx_tag_get(skb);
+		/* Set the Tx ring to use according to vlan priority */
+		tx_ind = priv->tx_prio_map[*vlan_tag >> 13];
+	} else {
+		*vlan_tag = 0;
+		tx_ind = 0;
+	}
+	return tx_ind;
+}
+
+int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = priv->mdev;
+	struct mlx4_en_tx_ring *ring;
+	struct mlx4_en_cq *cq;
+	struct mlx4_en_tx_desc *tx_desc;
+	struct mlx4_wqe_data_seg *data;
+	struct skb_frag_struct *frag;
+	struct mlx4_en_tx_info *tx_info;
+	int tx_ind = 0;
+	int nr_txbb;
+	int desc_size;
+	int real_size;
+	dma_addr_t dma;
+	u32 index;
+	__be32 op_own;
+	u16 vlan_tag;
+	int i;
+	int lso_header_size;
+	void *fragptr;
+
+	if (unlikely(!skb->len)) {
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+	real_size = get_real_size(skb, dev, &lso_header_size);
+	if (unlikely(!real_size))
+		return NETDEV_TX_OK;
+
+	/* Allign descriptor to TXBB size */
+	desc_size = ALIGN(real_size, TXBB_SIZE);
+	nr_txbb = desc_size / TXBB_SIZE;
+	if (unlikely(nr_txbb > MAX_DESC_TXBBS)) {
+		if (netif_msg_tx_err(priv))
+			mlx4_warn(mdev, "Oversized header or SG list\n");
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	tx_ind = get_vlan_info(priv, skb, &vlan_tag);
+	ring = &priv->tx_ring[tx_ind];
+
+	/* Check available TXBBs And 2K spare for prefetch */
+	if (unlikely(((int)(ring->prod - ring->cons)) >
+		     ring->size - HEADROOM - MAX_DESC_TXBBS)) {
+		/* every full Tx ring stops queue.
+		 * TODO: implement multi-queue support (per-queue stop) */
+		netif_stop_queue(dev);
+		ring->blocked = 1;
+		priv->port_stats.queue_stopped++;
+
+		/* Use interrupts to find out when queue opened */
+		cq = &priv->tx_cq[tx_ind];
+		mlx4_en_arm_cq(priv, cq);
+		return NETDEV_TX_BUSY;
+	}
+
+	/* Now that we know what Tx ring to use */
+	if (unlikely(!priv->port_up)) {
+		if (netif_msg_tx_err(priv))
+			mlx4_warn(mdev, "xmit: port down!\n");
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	/* Track current inflight packets for performance analysis */
+	AVG_PERF_COUNTER(priv->pstats.inflight_avg,
+			 (u32) (ring->prod - ring->cons - 1));
+
+	/* Packet is good - grab an index and transmit it */
+	index = ring->prod & ring->size_mask;
+
+	/* See if we have enough space for whole descriptor TXBB for setting
+	 * SW ownership on next descriptor; if not, use a bounce buffer. */
+	if (likely(index + nr_txbb <= ring->size))
+		tx_desc = ring->buf + index * TXBB_SIZE;
+	else
+		tx_desc = (struct mlx4_en_tx_desc *) ring->bounce_buf;
+
+	/* Save skb in tx_info ring */
+	tx_info = &ring->tx_info[index];
+	tx_info->skb = skb;
+	tx_info->nr_txbb = nr_txbb;
+
+	/* Prepare ctrl segement apart opcode+ownership, which depends on
+	 * whether LSO is used */
+	tx_desc->ctrl.vlan_tag = cpu_to_be16(vlan_tag);
+	tx_desc->ctrl.ins_vlan = MLX4_WQE_CTRL_INS_VLAN * !!vlan_tag;
+	tx_desc->ctrl.fence_size = (real_size / 16) & 0x3f;
+	tx_desc->ctrl.srcrb_flags = cpu_to_be32(MLX4_WQE_CTRL_CQ_UPDATE |
+						MLX4_WQE_CTRL_SOLICITED);
+	if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
+		tx_desc->ctrl.srcrb_flags |= cpu_to_be32(MLX4_WQE_CTRL_IP_CSUM |
+							 MLX4_WQE_CTRL_TCP_UDP_CSUM);
+		priv->port_stats.tx_chksum_offload++;
+	}
+
+	/* Handle LSO (TSO) packets */
+	if (lso_header_size) {
+		/* Mark opcode as LSO */
+		op_own = cpu_to_be32(MLX4_OPCODE_LSO | (1 << 6)) |
+			((ring->prod & ring->size) ?
+				cpu_to_be32(MLX4_EN_BIT_DESC_OWN) : 0);
+
+		/* Fill in the LSO prefix */
+		tx_desc->lso.mss_hdr_size = cpu_to_be32(
+			skb_shinfo(skb)->gso_size << 16 | lso_header_size);
+
+		/* Copy headers;
+		 * note that we already verified that it is linear */
+		memcpy(tx_desc->lso.header, skb->data, lso_header_size);
+		data = ((void *) &tx_desc->lso +
+			ALIGN(lso_header_size + 4, DS_SIZE));
+
+		priv->port_stats.tso_packets++;
+		i = ((skb->len - lso_header_size) / skb_shinfo(skb)->gso_size) +
+			!!((skb->len - lso_header_size) % skb_shinfo(skb)->gso_size);
+		ring->bytes += skb->len + (i - 1) * lso_header_size;
+		ring->packets += i;
+	} else {
+		/* Normal (Non LSO) packet */
+		op_own = cpu_to_be32(MLX4_OPCODE_SEND) |
+			((ring->prod & ring->size) ?
+			 cpu_to_be32(MLX4_EN_BIT_DESC_OWN) : 0);
+		data = &tx_desc->data;
+		ring->bytes += max(skb->len, (unsigned int) ETH_ZLEN);
+		ring->packets++;
+
+	}
+	AVG_PERF_COUNTER(priv->pstats.tx_pktsz_avg, skb->len);
+
+
+	/* valid only for none inline segments */
+	tx_info->data_offset = (void *) data - (void *) tx_desc;
+
+	tx_info->linear = (lso_header_size < skb_headlen(skb) && !is_inline(skb, NULL)) ? 1 : 0;
+	data += skb_shinfo(skb)->nr_frags + tx_info->linear - 1;
+
+	if (!is_inline(skb, &fragptr)) {
+		/* Map fragments */
+		for (i = skb_shinfo(skb)->nr_frags - 1; i >= 0; i--) {
+			frag = &skb_shinfo(skb)->frags[i];
+			dma = pci_map_page(mdev->dev->pdev, frag->page, frag->page_offset,
+					   frag->size, PCI_DMA_TODEVICE);
+			data->addr = cpu_to_be64(dma);
+			data->lkey = cpu_to_be32(mdev->mr.key);
+			wmb();
+			data->byte_count = cpu_to_be32(frag->size);
+			--data;
+		}
+
+		/* Map linear part */
+		if (tx_info->linear) {
+			dma = pci_map_single(mdev->dev->pdev, skb->data + lso_header_size,
+					     skb_headlen(skb) - lso_header_size, PCI_DMA_TODEVICE);
+			data->addr = cpu_to_be64(dma);
+			data->lkey = cpu_to_be32(mdev->mr.key);
+			wmb();
+			data->byte_count = cpu_to_be32(skb_headlen(skb) - lso_header_size);
+		}
+	} else
+		build_inline_wqe(tx_desc, skb, real_size, &vlan_tag, tx_ind, fragptr);
+
+	ring->prod += nr_txbb;
+
+	/* If we used a bounce buffer then copy descriptor back into place */
+	if (tx_desc == (struct mlx4_en_tx_desc *) ring->bounce_buf)
+		tx_desc = mlx4_en_bounce_to_desc(priv, ring, index, desc_size);
+
+	/* Run destructor before passing skb to HW */
+	if (likely(!skb_shared(skb)))
+		skb_orphan(skb);
+
+	/* Ensure new descirptor hits memory
+	 * before setting ownership of this descriptor to HW */
+	wmb();
+	tx_desc->ctrl.owner_opcode = op_own;
+
+	/* Ring doorbell! */
+	wmb();
+	writel(ring->doorbell_qpn, mdev->uar_map + MLX4_SEND_DOORBELL);
+	dev->trans_start = jiffies;
+
+	/* Poll CQ here */
+	mlx4_en_xmit_poll(priv, tx_ind);
+
+	return 0;
+}
+
diff --git a/drivers/net/mlx4/eq.c b/drivers/net/mlx4/eq.c
index 8a8b561..de16933 100644
--- a/drivers/net/mlx4/eq.c
+++ b/drivers/net/mlx4/eq.c
@@ -558,7 +558,7 @@
 	int i;
 
 	err = mlx4_bitmap_init(&priv->eq_table.bitmap, dev->caps.num_eqs,
-			       dev->caps.num_eqs - 1, dev->caps.reserved_eqs);
+			       dev->caps.num_eqs - 1, dev->caps.reserved_eqs, 0);
 	if (err)
 		return err;
 
diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c
index 7e32955..be09fdb 100644
--- a/drivers/net/mlx4/fw.c
+++ b/drivers/net/mlx4/fw.c
@@ -88,6 +88,7 @@
 		[ 8] = "P_Key violation counter",
 		[ 9] = "Q_Key violation counter",
 		[10] = "VMM",
+		[12] = "DPDP",
 		[16] = "MW support",
 		[17] = "APM support",
 		[18] = "Atomic ops support",
@@ -346,7 +347,7 @@
 			MLX4_GET(field, outbox, QUERY_DEV_CAP_VL_PORT_OFFSET);
 			dev_cap->max_vl[i]	   = field >> 4;
 			MLX4_GET(field, outbox, QUERY_DEV_CAP_MTU_WIDTH_OFFSET);
-			dev_cap->max_mtu[i]	   = field >> 4;
+			dev_cap->ib_mtu[i]	   = field >> 4;
 			dev_cap->max_port_width[i] = field & 0xf;
 			MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_GID_OFFSET);
 			dev_cap->max_gids[i]	   = 1 << (field & 0xf);
@@ -354,9 +355,13 @@
 			dev_cap->max_pkeys[i]	   = 1 << (field & 0xf);
 		}
 	} else {
+#define QUERY_PORT_SUPPORTED_TYPE_OFFSET	0x00
 #define QUERY_PORT_MTU_OFFSET			0x01
+#define QUERY_PORT_ETH_MTU_OFFSET		0x02
 #define QUERY_PORT_WIDTH_OFFSET			0x06
 #define QUERY_PORT_MAX_GID_PKEY_OFFSET		0x07
+#define QUERY_PORT_MAC_OFFSET			0x08
+#define QUERY_PORT_MAX_MACVLAN_OFFSET		0x0a
 #define QUERY_PORT_MAX_VL_OFFSET		0x0b
 
 		for (i = 1; i <= dev_cap->num_ports; ++i) {
@@ -365,8 +370,10 @@
 			if (err)
 				goto out;
 
+			MLX4_GET(field, outbox, QUERY_PORT_SUPPORTED_TYPE_OFFSET);
+			dev_cap->supported_port_types[i] = field & 3;
 			MLX4_GET(field, outbox, QUERY_PORT_MTU_OFFSET);
-			dev_cap->max_mtu[i]	   = field & 0xf;
+			dev_cap->ib_mtu[i]	   = field & 0xf;
 			MLX4_GET(field, outbox, QUERY_PORT_WIDTH_OFFSET);
 			dev_cap->max_port_width[i] = field & 0xf;
 			MLX4_GET(field, outbox, QUERY_PORT_MAX_GID_PKEY_OFFSET);
@@ -374,6 +381,11 @@
 			dev_cap->max_pkeys[i]	   = 1 << (field & 0xf);
 			MLX4_GET(field, outbox, QUERY_PORT_MAX_VL_OFFSET);
 			dev_cap->max_vl[i]	   = field & 0xf;
+			MLX4_GET(field, outbox, QUERY_PORT_MAX_MACVLAN_OFFSET);
+			dev_cap->log_max_macs[i]  = field & 0xf;
+			dev_cap->log_max_vlans[i] = field >> 4;
+			MLX4_GET(dev_cap->eth_mtu[i], outbox, QUERY_PORT_ETH_MTU_OFFSET);
+			MLX4_GET(dev_cap->def_mac[i], outbox, QUERY_PORT_MAC_OFFSET);
 		}
 	}
 
@@ -407,7 +419,7 @@
 	mlx4_dbg(dev, "Max CQEs: %d, max WQEs: %d, max SRQ WQEs: %d\n",
 		 dev_cap->max_cq_sz, dev_cap->max_qp_sz, dev_cap->max_srq_sz);
 	mlx4_dbg(dev, "Local CA ACK delay: %d, max MTU: %d, port width cap: %d\n",
-		 dev_cap->local_ca_ack_delay, 128 << dev_cap->max_mtu[1],
+		 dev_cap->local_ca_ack_delay, 128 << dev_cap->ib_mtu[1],
 		 dev_cap->max_port_width[1]);
 	mlx4_dbg(dev, "Max SQ desc size: %d, max SQ S/G: %d\n",
 		 dev_cap->max_sq_desc_sz, dev_cap->max_sq_sg);
@@ -819,7 +831,7 @@
 		flags |= (dev->caps.port_width_cap[port] & 0xf) << INIT_PORT_PORT_WIDTH_SHIFT;
 		MLX4_PUT(inbox, flags,		  INIT_PORT_FLAGS_OFFSET);
 
-		field = 128 << dev->caps.mtu_cap[port];
+		field = 128 << dev->caps.ib_mtu_cap[port];
 		MLX4_PUT(inbox, field, INIT_PORT_MTU_OFFSET);
 		field = dev->caps.gid_table_len[port];
 		MLX4_PUT(inbox, field, INIT_PORT_MAX_GID_OFFSET);
diff --git a/drivers/net/mlx4/fw.h b/drivers/net/mlx4/fw.h
index decbb5c..526d7f3 100644
--- a/drivers/net/mlx4/fw.h
+++ b/drivers/net/mlx4/fw.h
@@ -66,11 +66,13 @@
 	int local_ca_ack_delay;
 	int num_ports;
 	u32 max_msg_sz;
-	int max_mtu[MLX4_MAX_PORTS + 1];
+	int ib_mtu[MLX4_MAX_PORTS + 1];
 	int max_port_width[MLX4_MAX_PORTS + 1];
 	int max_vl[MLX4_MAX_PORTS + 1];
 	int max_gids[MLX4_MAX_PORTS + 1];
 	int max_pkeys[MLX4_MAX_PORTS + 1];
+	u64 def_mac[MLX4_MAX_PORTS + 1];
+	u16 eth_mtu[MLX4_MAX_PORTS + 1];
 	u16 stat_rate_support;
 	u32 flags;
 	int reserved_uars;
@@ -102,6 +104,9 @@
 	u32 reserved_lkey;
 	u64 max_icm_sz;
 	int max_gso_sz;
+	u8  supported_port_types[MLX4_MAX_PORTS + 1];
+	u8  log_max_macs[MLX4_MAX_PORTS + 1];
+	u8  log_max_vlans[MLX4_MAX_PORTS + 1];
 };
 
 struct mlx4_adapter {
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 1252a919..468921b8 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -85,6 +85,57 @@
 	.num_mtt	= 1 << 20,
 };
 
+static int log_num_mac = 2;
+module_param_named(log_num_mac, log_num_mac, int, 0444);
+MODULE_PARM_DESC(log_num_mac, "Log2 max number of MACs per ETH port (1-7)");
+
+static int log_num_vlan;
+module_param_named(log_num_vlan, log_num_vlan, int, 0444);
+MODULE_PARM_DESC(log_num_vlan, "Log2 max number of VLANs per ETH port (0-7)");
+
+static int use_prio;
+module_param_named(use_prio, use_prio, bool, 0444);
+MODULE_PARM_DESC(use_prio, "Enable steering by VLAN priority on ETH ports "
+		  "(0/1, default 0)");
+
+static int mlx4_check_port_params(struct mlx4_dev *dev,
+				  enum mlx4_port_type *port_type)
+{
+	int i;
+
+	for (i = 0; i < dev->caps.num_ports - 1; i++) {
+		if (port_type[i] != port_type[i+1] &&
+		    !(dev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP)) {
+			mlx4_err(dev, "Only same port types supported "
+				 "on this HCA, aborting.\n");
+			return -EINVAL;
+		}
+	}
+	if ((port_type[0] == MLX4_PORT_TYPE_ETH) &&
+	    (port_type[1] == MLX4_PORT_TYPE_IB)) {
+		mlx4_err(dev, "eth-ib configuration is not supported.\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < dev->caps.num_ports; i++) {
+		if (!(port_type[i] & dev->caps.supported_type[i+1])) {
+			mlx4_err(dev, "Requested port type for port %d is not "
+				      "supported on this HCA\n", i + 1);
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+static void mlx4_set_port_mask(struct mlx4_dev *dev)
+{
+	int i;
+
+	dev->caps.port_mask = 0;
+	for (i = 1; i <= dev->caps.num_ports; ++i)
+		if (dev->caps.port_type[i] == MLX4_PORT_TYPE_IB)
+			dev->caps.port_mask |= 1 << (i - 1);
+}
 static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 {
 	int err;
@@ -120,10 +171,13 @@
 	dev->caps.num_ports	     = dev_cap->num_ports;
 	for (i = 1; i <= dev->caps.num_ports; ++i) {
 		dev->caps.vl_cap[i]	    = dev_cap->max_vl[i];
-		dev->caps.mtu_cap[i]	    = dev_cap->max_mtu[i];
+		dev->caps.ib_mtu_cap[i]	    = dev_cap->ib_mtu[i];
 		dev->caps.gid_table_len[i]  = dev_cap->max_gids[i];
 		dev->caps.pkey_table_len[i] = dev_cap->max_pkeys[i];
 		dev->caps.port_width_cap[i] = dev_cap->max_port_width[i];
+		dev->caps.eth_mtu_cap[i]    = dev_cap->eth_mtu[i];
+		dev->caps.def_mac[i]        = dev_cap->def_mac[i];
+		dev->caps.supported_type[i] = dev_cap->supported_port_types[i];
 	}
 
 	dev->caps.num_uars	     = dev_cap->uar_size / PAGE_SIZE;
@@ -134,7 +188,6 @@
 	dev->caps.max_rq_sg	     = dev_cap->max_rq_sg;
 	dev->caps.max_wqes	     = dev_cap->max_qp_sz;
 	dev->caps.max_qp_init_rdma   = dev_cap->max_requester_per_qp;
-	dev->caps.reserved_qps	     = dev_cap->reserved_qps;
 	dev->caps.max_srq_wqes	     = dev_cap->max_srq_sz;
 	dev->caps.max_srq_sge	     = dev_cap->max_rq_sg - 1;
 	dev->caps.reserved_srqs	     = dev_cap->reserved_srqs;
@@ -163,9 +216,138 @@
 	dev->caps.stat_rate_support  = dev_cap->stat_rate_support;
 	dev->caps.max_gso_sz	     = dev_cap->max_gso_sz;
 
+	dev->caps.log_num_macs  = log_num_mac;
+	dev->caps.log_num_vlans = log_num_vlan;
+	dev->caps.log_num_prios = use_prio ? 3 : 0;
+
+	for (i = 1; i <= dev->caps.num_ports; ++i) {
+		if (dev->caps.supported_type[i] != MLX4_PORT_TYPE_ETH)
+			dev->caps.port_type[i] = MLX4_PORT_TYPE_IB;
+		else
+			dev->caps.port_type[i] = MLX4_PORT_TYPE_ETH;
+
+		if (dev->caps.log_num_macs > dev_cap->log_max_macs[i]) {
+			dev->caps.log_num_macs = dev_cap->log_max_macs[i];
+			mlx4_warn(dev, "Requested number of MACs is too much "
+				  "for port %d, reducing to %d.\n",
+				  i, 1 << dev->caps.log_num_macs);
+		}
+		if (dev->caps.log_num_vlans > dev_cap->log_max_vlans[i]) {
+			dev->caps.log_num_vlans = dev_cap->log_max_vlans[i];
+			mlx4_warn(dev, "Requested number of VLANs is too much "
+				  "for port %d, reducing to %d.\n",
+				  i, 1 << dev->caps.log_num_vlans);
+		}
+	}
+
+	mlx4_set_port_mask(dev);
+
+	dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW] = dev_cap->reserved_qps;
+	dev->caps.reserved_qps_cnt[MLX4_QP_REGION_ETH_ADDR] =
+		dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_ADDR] =
+		(1 << dev->caps.log_num_macs) *
+		(1 << dev->caps.log_num_vlans) *
+		(1 << dev->caps.log_num_prios) *
+		dev->caps.num_ports;
+	dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_EXCH] = MLX4_NUM_FEXCH;
+
+	dev->caps.reserved_qps = dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW] +
+		dev->caps.reserved_qps_cnt[MLX4_QP_REGION_ETH_ADDR] +
+		dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_ADDR] +
+		dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_EXCH];
+
 	return 0;
 }
 
+/*
+ * Change the port configuration of the device.
+ * Every user of this function must hold the port mutex.
+ */
+static int mlx4_change_port_types(struct mlx4_dev *dev,
+				  enum mlx4_port_type *port_types)
+{
+	int err = 0;
+	int change = 0;
+	int port;
+
+	for (port = 0; port <  dev->caps.num_ports; port++) {
+		if (port_types[port] != dev->caps.port_type[port + 1]) {
+			change = 1;
+			dev->caps.port_type[port + 1] = port_types[port];
+		}
+	}
+	if (change) {
+		mlx4_unregister_device(dev);
+		for (port = 1; port <= dev->caps.num_ports; port++) {
+			mlx4_CLOSE_PORT(dev, port);
+			err = mlx4_SET_PORT(dev, port);
+			if (err) {
+				mlx4_err(dev, "Failed to set port %d, "
+					      "aborting\n", port);
+				goto out;
+			}
+		}
+		mlx4_set_port_mask(dev);
+		err = mlx4_register_device(dev);
+	}
+
+out:
+	return err;
+}
+
+static ssize_t show_port_type(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
+						   port_attr);
+	struct mlx4_dev *mdev = info->dev;
+
+	return sprintf(buf, "%s\n",
+		       mdev->caps.port_type[info->port] == MLX4_PORT_TYPE_IB ?
+		       "ib" : "eth");
+}
+
+static ssize_t set_port_type(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
+						   port_attr);
+	struct mlx4_dev *mdev = info->dev;
+	struct mlx4_priv *priv = mlx4_priv(mdev);
+	enum mlx4_port_type types[MLX4_MAX_PORTS];
+	int i;
+	int err = 0;
+
+	if (!strcmp(buf, "ib\n"))
+		info->tmp_type = MLX4_PORT_TYPE_IB;
+	else if (!strcmp(buf, "eth\n"))
+		info->tmp_type = MLX4_PORT_TYPE_ETH;
+	else {
+		mlx4_err(mdev, "%s is not supported port type\n", buf);
+		return -EINVAL;
+	}
+
+	mutex_lock(&priv->port_mutex);
+	for (i = 0; i < mdev->caps.num_ports; i++)
+		types[i] = priv->port[i+1].tmp_type ? priv->port[i+1].tmp_type :
+					mdev->caps.port_type[i+1];
+
+	err = mlx4_check_port_params(mdev, types);
+	if (err)
+		goto out;
+
+	for (i = 1; i <= mdev->caps.num_ports; i++)
+		priv->port[i].tmp_type = 0;
+
+	err = mlx4_change_port_types(mdev, types);
+
+out:
+	mutex_unlock(&priv->port_mutex);
+	return err ? err : count;
+}
+
 static int mlx4_load_fw(struct mlx4_dev *dev)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
@@ -211,7 +393,8 @@
 				  ((u64) (MLX4_CMPT_TYPE_QP *
 					  cmpt_entry_sz) << MLX4_CMPT_SHIFT),
 				  cmpt_entry_sz, dev->caps.num_qps,
-				  dev->caps.reserved_qps, 0, 0);
+				  dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW],
+				  0, 0);
 	if (err)
 		goto err;
 
@@ -336,7 +519,8 @@
 				  init_hca->qpc_base,
 				  dev_cap->qpc_entry_sz,
 				  dev->caps.num_qps,
-				  dev->caps.reserved_qps, 0, 0);
+				  dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW],
+				  0, 0);
 	if (err) {
 		mlx4_err(dev, "Failed to map QP context memory, aborting.\n");
 		goto err_unmap_dmpt;
@@ -346,7 +530,8 @@
 				  init_hca->auxc_base,
 				  dev_cap->aux_entry_sz,
 				  dev->caps.num_qps,
-				  dev->caps.reserved_qps, 0, 0);
+				  dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW],
+				  0, 0);
 	if (err) {
 		mlx4_err(dev, "Failed to map AUXC context memory, aborting.\n");
 		goto err_unmap_qp;
@@ -356,7 +541,8 @@
 				  init_hca->altc_base,
 				  dev_cap->altc_entry_sz,
 				  dev->caps.num_qps,
-				  dev->caps.reserved_qps, 0, 0);
+				  dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW],
+				  0, 0);
 	if (err) {
 		mlx4_err(dev, "Failed to map ALTC context memory, aborting.\n");
 		goto err_unmap_auxc;
@@ -366,7 +552,8 @@
 				  init_hca->rdmarc_base,
 				  dev_cap->rdmarc_entry_sz << priv->qp_table.rdmarc_shift,
 				  dev->caps.num_qps,
-				  dev->caps.reserved_qps, 0, 0);
+				  dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW],
+				  0, 0);
 	if (err) {
 		mlx4_err(dev, "Failed to map RDMARC context memory, aborting\n");
 		goto err_unmap_altc;
@@ -565,6 +752,7 @@
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	int err;
+	int port;
 
 	err = mlx4_init_uar_table(dev);
 	if (err) {
@@ -663,8 +851,20 @@
 		goto err_qp_table_free;
 	}
 
+	for (port = 1; port <= dev->caps.num_ports; port++) {
+		err = mlx4_SET_PORT(dev, port);
+		if (err) {
+			mlx4_err(dev, "Failed to set port %d, aborting\n",
+				port);
+			goto err_mcg_table_free;
+		}
+	}
+
 	return 0;
 
+err_mcg_table_free:
+	mlx4_cleanup_mcg_table(dev);
+
 err_qp_table_free:
 	mlx4_cleanup_qp_table(dev);
 
@@ -728,11 +928,45 @@
 		priv->eq_table.eq[i].irq = dev->pdev->irq;
 }
 
+static int mlx4_init_port_info(struct mlx4_dev *dev, int port)
+{
+	struct mlx4_port_info *info = &mlx4_priv(dev)->port[port];
+	int err = 0;
+
+	info->dev = dev;
+	info->port = port;
+	mlx4_init_mac_table(dev, &info->mac_table);
+	mlx4_init_vlan_table(dev, &info->vlan_table);
+
+	sprintf(info->dev_name, "mlx4_port%d", port);
+	info->port_attr.attr.name = info->dev_name;
+	info->port_attr.attr.mode = S_IRUGO | S_IWUSR;
+	info->port_attr.show      = show_port_type;
+	info->port_attr.store     = set_port_type;
+
+	err = device_create_file(&dev->pdev->dev, &info->port_attr);
+	if (err) {
+		mlx4_err(dev, "Failed to create file for port %d\n", port);
+		info->port = -1;
+	}
+
+	return err;
+}
+
+static void mlx4_cleanup_port_info(struct mlx4_port_info *info)
+{
+	if (info->port < 0)
+		return;
+
+	device_remove_file(&info->dev->pdev->dev, &info->port_attr);
+}
+
 static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct mlx4_priv *priv;
 	struct mlx4_dev *dev;
 	int err;
+	int port;
 
 	printk(KERN_INFO PFX "Initializing %s\n",
 	       pci_name(pdev));
@@ -807,6 +1041,8 @@
 	INIT_LIST_HEAD(&priv->ctx_list);
 	spin_lock_init(&priv->ctx_lock);
 
+	mutex_init(&priv->port_mutex);
+
 	INIT_LIST_HEAD(&priv->pgdir_list);
 	mutex_init(&priv->pgdir_mutex);
 
@@ -842,15 +1078,24 @@
 	if (err)
 		goto err_close;
 
+	for (port = 1; port <= dev->caps.num_ports; port++) {
+		err = mlx4_init_port_info(dev, port);
+		if (err)
+			goto err_port;
+	}
+
 	err = mlx4_register_device(dev);
 	if (err)
-		goto err_cleanup;
+		goto err_port;
 
 	pci_set_drvdata(pdev, dev);
 
 	return 0;
 
-err_cleanup:
+err_port:
+	for (port = 1; port <= dev->caps.num_ports; port++)
+		mlx4_cleanup_port_info(&priv->port[port]);
+
 	mlx4_cleanup_mcg_table(dev);
 	mlx4_cleanup_qp_table(dev);
 	mlx4_cleanup_srq_table(dev);
@@ -907,8 +1152,10 @@
 	if (dev) {
 		mlx4_unregister_device(dev);
 
-		for (p = 1; p <= dev->caps.num_ports; ++p)
+		for (p = 1; p <= dev->caps.num_ports; p++) {
+			mlx4_cleanup_port_info(&priv->port[p]);
 			mlx4_CLOSE_PORT(dev, p);
+		}
 
 		mlx4_cleanup_mcg_table(dev);
 		mlx4_cleanup_qp_table(dev);
@@ -948,6 +1195,8 @@
 	{ PCI_VDEVICE(MELLANOX, 0x6354) }, /* MT25408 "Hermon" QDR */
 	{ PCI_VDEVICE(MELLANOX, 0x6732) }, /* MT25408 "Hermon" DDR PCIe gen2 */
 	{ PCI_VDEVICE(MELLANOX, 0x673c) }, /* MT25408 "Hermon" QDR PCIe gen2 */
+	{ PCI_VDEVICE(MELLANOX, 0x6368) }, /* MT25408 "Hermon" EN 10GigE */
+	{ PCI_VDEVICE(MELLANOX, 0x6750) }, /* MT25408 "Hermon" EN 10GigE PCIe gen2 */
 	{ 0, }
 };
 
@@ -960,10 +1209,28 @@
 	.remove		= __devexit_p(mlx4_remove_one)
 };
 
+static int __init mlx4_verify_params(void)
+{
+	if ((log_num_mac < 0) || (log_num_mac > 7)) {
+		printk(KERN_WARNING "mlx4_core: bad num_mac: %d\n", log_num_mac);
+		return -1;
+	}
+
+	if ((log_num_vlan < 0) || (log_num_vlan > 7)) {
+		printk(KERN_WARNING "mlx4_core: bad num_vlan: %d\n", log_num_vlan);
+		return -1;
+	}
+
+	return 0;
+}
+
 static int __init mlx4_init(void)
 {
 	int ret;
 
+	if (mlx4_verify_params())
+		return -EINVAL;
+
 	ret = mlx4_catas_init();
 	if (ret)
 		return ret;
diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/mlx4/mcg.c
index c83f88c..592c01a 100644
--- a/drivers/net/mlx4/mcg.c
+++ b/drivers/net/mlx4/mcg.c
@@ -368,8 +368,8 @@
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	int err;
 
-	err = mlx4_bitmap_init(&priv->mcg_table.bitmap,
-			       dev->caps.num_amgms, dev->caps.num_amgms - 1, 0);
+	err = mlx4_bitmap_init(&priv->mcg_table.bitmap, dev->caps.num_amgms,
+			       dev->caps.num_amgms - 1, 0, 0);
 	if (err)
 		return err;
 
diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
index 5337e3a..fa431fa 100644
--- a/drivers/net/mlx4/mlx4.h
+++ b/drivers/net/mlx4/mlx4.h
@@ -111,6 +111,7 @@
 	u32			last;
 	u32			top;
 	u32			max;
+	u32                     reserved_top;
 	u32			mask;
 	spinlock_t		lock;
 	unsigned long	       *table;
@@ -251,6 +252,38 @@
 	struct list_head	list;
 };
 
+#define MLX4_MAX_MAC_NUM	128
+#define MLX4_MAC_TABLE_SIZE	(MLX4_MAX_MAC_NUM << 3)
+
+struct mlx4_mac_table {
+	__be64			entries[MLX4_MAX_MAC_NUM];
+	int			refs[MLX4_MAX_MAC_NUM];
+	struct mutex		mutex;
+	int			total;
+	int			max;
+};
+
+#define MLX4_MAX_VLAN_NUM	128
+#define MLX4_VLAN_TABLE_SIZE	(MLX4_MAX_VLAN_NUM << 2)
+
+struct mlx4_vlan_table {
+	__be32			entries[MLX4_MAX_VLAN_NUM];
+	int			refs[MLX4_MAX_VLAN_NUM];
+	struct mutex		mutex;
+	int			total;
+	int			max;
+};
+
+struct mlx4_port_info {
+	struct mlx4_dev	       *dev;
+	int			port;
+	char			dev_name[16];
+	struct device_attribute port_attr;
+	enum mlx4_port_type	tmp_type;
+	struct mlx4_mac_table	mac_table;
+	struct mlx4_vlan_table	vlan_table;
+};
+
 struct mlx4_priv {
 	struct mlx4_dev		dev;
 
@@ -279,6 +312,8 @@
 
 	struct mlx4_uar		driver_uar;
 	void __iomem	       *kar;
+	struct mlx4_port_info	port[MLX4_MAX_PORTS + 1];
+	struct mutex		port_mutex;
 };
 
 static inline struct mlx4_priv *mlx4_priv(struct mlx4_dev *dev)
@@ -288,7 +323,10 @@
 
 u32 mlx4_bitmap_alloc(struct mlx4_bitmap *bitmap);
 void mlx4_bitmap_free(struct mlx4_bitmap *bitmap, u32 obj);
-int mlx4_bitmap_init(struct mlx4_bitmap *bitmap, u32 num, u32 mask, u32 reserved);
+u32 mlx4_bitmap_alloc_range(struct mlx4_bitmap *bitmap, int cnt, int align);
+void mlx4_bitmap_free_range(struct mlx4_bitmap *bitmap, u32 obj, int cnt);
+int mlx4_bitmap_init(struct mlx4_bitmap *bitmap, u32 num, u32 mask,
+		     u32 reserved_bot, u32 resetrved_top);
 void mlx4_bitmap_cleanup(struct mlx4_bitmap *bitmap);
 
 int mlx4_reset(struct mlx4_dev *dev);
@@ -346,4 +384,9 @@
 
 void mlx4_handle_catas_err(struct mlx4_dev *dev);
 
+void mlx4_init_mac_table(struct mlx4_dev *dev, struct mlx4_mac_table *table);
+void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table);
+
+int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port);
+
 #endif /* MLX4_H */
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
new file mode 100644
index 0000000..11fb17c
--- /dev/null
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -0,0 +1,561 @@
+/*
+ * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#ifndef _MLX4_EN_H_
+#define _MLX4_EN_H_
+
+#include <linux/compiler.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/netdevice.h>
+#include <linux/inet_lro.h>
+
+#include <linux/mlx4/device.h>
+#include <linux/mlx4/qp.h>
+#include <linux/mlx4/cq.h>
+#include <linux/mlx4/srq.h>
+#include <linux/mlx4/doorbell.h>
+
+#include "en_port.h"
+
+#define DRV_NAME	"mlx4_en"
+#define DRV_VERSION	"1.4.0"
+#define DRV_RELDATE	"Sep 2008"
+
+
+#define MLX4_EN_MSG_LEVEL	(NETIF_MSG_LINK | NETIF_MSG_IFDOWN)
+
+#define mlx4_dbg(mlevel, priv, format, arg...)	\
+	if (NETIF_MSG_##mlevel & priv->msg_enable) \
+	printk(KERN_DEBUG "%s %s: " format , DRV_NAME ,\
+		(&priv->mdev->pdev->dev)->bus_id , ## arg)
+
+#define mlx4_err(mdev, format, arg...) \
+	printk(KERN_ERR "%s %s: " format , DRV_NAME ,\
+		(&mdev->pdev->dev)->bus_id , ## arg)
+#define mlx4_info(mdev, format, arg...) \
+	printk(KERN_INFO "%s %s: " format , DRV_NAME ,\
+		(&mdev->pdev->dev)->bus_id , ## arg)
+#define mlx4_warn(mdev, format, arg...) \
+	printk(KERN_WARNING "%s %s: " format , DRV_NAME ,\
+		(&mdev->pdev->dev)->bus_id , ## arg)
+
+/*
+ * Device constants
+ */
+
+
+#define MLX4_EN_PAGE_SHIFT	12
+#define MLX4_EN_PAGE_SIZE	(1 << MLX4_EN_PAGE_SHIFT)
+#define MAX_TX_RINGS		16
+#define MAX_RX_RINGS		16
+#define MAX_RSS_MAP_SIZE	64
+#define RSS_FACTOR		2
+#define TXBB_SIZE		64
+#define HEADROOM		(2048 / TXBB_SIZE + 1)
+#define MAX_LSO_HDR_SIZE	92
+#define STAMP_STRIDE		64
+#define STAMP_DWORDS		(STAMP_STRIDE / 4)
+#define STAMP_SHIFT		31
+#define STAMP_VAL		0x7fffffff
+#define STATS_DELAY		(HZ / 4)
+
+/* Typical TSO descriptor with 16 gather entries is 352 bytes... */
+#define MAX_DESC_SIZE		512
+#define MAX_DESC_TXBBS		(MAX_DESC_SIZE / TXBB_SIZE)
+
+/*
+ * OS related constants and tunables
+ */
+
+#define MLX4_EN_WATCHDOG_TIMEOUT	(15 * HZ)
+
+#define MLX4_EN_ALLOC_ORDER	2
+#define MLX4_EN_ALLOC_SIZE	(PAGE_SIZE << MLX4_EN_ALLOC_ORDER)
+
+#define MLX4_EN_MAX_LRO_DESCRIPTORS	32
+
+/* Receive fragment sizes; we use at most 4 fragments (for 9600 byte MTU
+ * and 4K allocations) */
+enum {
+	FRAG_SZ0 = 512 - NET_IP_ALIGN,
+	FRAG_SZ1 = 1024,
+	FRAG_SZ2 = 4096,
+	FRAG_SZ3 = MLX4_EN_ALLOC_SIZE
+};
+#define MLX4_EN_MAX_RX_FRAGS	4
+
+/* Minimum ring size for our page-allocation sceme to work */
+#define MLX4_EN_MIN_RX_SIZE	(MLX4_EN_ALLOC_SIZE / SMP_CACHE_BYTES)
+#define MLX4_EN_MIN_TX_SIZE	(4096 / TXBB_SIZE)
+
+#define MLX4_EN_TX_RING_NUM		9
+#define MLX4_EN_DEF_TX_RING_SIZE	1024
+#define MLX4_EN_DEF_RX_RING_SIZE  	1024
+
+/* Target number of bytes to coalesce with interrupt moderation */
+#define MLX4_EN_RX_COAL_TARGET	0x20000
+#define MLX4_EN_RX_COAL_TIME	0x10
+
+#define MLX4_EN_TX_COAL_PKTS	5
+#define MLX4_EN_TX_COAL_TIME	0x80
+
+#define MLX4_EN_RX_RATE_LOW		400000
+#define MLX4_EN_RX_COAL_TIME_LOW	0
+#define MLX4_EN_RX_RATE_HIGH		450000
+#define MLX4_EN_RX_COAL_TIME_HIGH	128
+#define MLX4_EN_RX_SIZE_THRESH		1024
+#define MLX4_EN_RX_RATE_THRESH		(1000000 / MLX4_EN_RX_COAL_TIME_HIGH)
+#define MLX4_EN_SAMPLE_INTERVAL		0
+
+#define MLX4_EN_AUTO_CONF	0xffff
+
+#define MLX4_EN_DEF_RX_PAUSE	1
+#define MLX4_EN_DEF_TX_PAUSE	1
+
+/* Interval between sucessive polls in the Tx routine when polling is used
+   instead of interrupts (in per-core Tx rings) - should be power of 2 */
+#define MLX4_EN_TX_POLL_MODER	16
+#define MLX4_EN_TX_POLL_TIMEOUT	(HZ / 4)
+
+#define ETH_LLC_SNAP_SIZE	8
+
+#define SMALL_PACKET_SIZE      (256 - NET_IP_ALIGN)
+#define HEADER_COPY_SIZE       (128 - NET_IP_ALIGN)
+
+#define MLX4_EN_MIN_MTU		46
+#define ETH_BCAST		0xffffffffffffULL
+
+#ifdef MLX4_EN_PERF_STAT
+/* Number of samples to 'average' */
+#define AVG_SIZE			128
+#define AVG_FACTOR			1024
+#define NUM_PERF_STATS			NUM_PERF_COUNTERS
+
+#define INC_PERF_COUNTER(cnt)		(++(cnt))
+#define ADD_PERF_COUNTER(cnt, add)	((cnt) += (add))
+#define AVG_PERF_COUNTER(cnt, sample) \
+	((cnt) = ((cnt) * (AVG_SIZE - 1) + (sample) * AVG_FACTOR) / AVG_SIZE)
+#define GET_PERF_COUNTER(cnt)		(cnt)
+#define GET_AVG_PERF_COUNTER(cnt)	((cnt) / AVG_FACTOR)
+
+#else
+
+#define NUM_PERF_STATS			0
+#define INC_PERF_COUNTER(cnt)		do {} while (0)
+#define ADD_PERF_COUNTER(cnt, add)	do {} while (0)
+#define AVG_PERF_COUNTER(cnt, sample)	do {} while (0)
+#define GET_PERF_COUNTER(cnt)		(0)
+#define GET_AVG_PERF_COUNTER(cnt)	(0)
+#endif /* MLX4_EN_PERF_STAT */
+
+/*
+ * Configurables
+ */
+
+enum cq_type {
+	RX = 0,
+	TX = 1,
+};
+
+
+/*
+ * Useful macros
+ */
+#define ROUNDUP_LOG2(x)		ilog2(roundup_pow_of_two(x))
+#define XNOR(x, y)		(!(x) == !(y))
+#define ILLEGAL_MAC(addr)	(addr == 0xffffffffffffULL || addr == 0x0)
+
+
+struct mlx4_en_tx_info {
+	struct sk_buff *skb;
+	u32 nr_txbb;
+	u8 linear;
+	u8 data_offset;
+};
+
+
+#define MLX4_EN_BIT_DESC_OWN	0x80000000
+#define CTRL_SIZE	sizeof(struct mlx4_wqe_ctrl_seg)
+#define MLX4_EN_MEMTYPE_PAD	0x100
+#define DS_SIZE		sizeof(struct mlx4_wqe_data_seg)
+
+
+struct mlx4_en_tx_desc {
+	struct mlx4_wqe_ctrl_seg ctrl;
+	union {
+		struct mlx4_wqe_data_seg data; /* at least one data segment */
+		struct mlx4_wqe_lso_seg lso;
+		struct mlx4_wqe_inline_seg inl;
+	};
+};
+
+#define MLX4_EN_USE_SRQ		0x01000000
+
+struct mlx4_en_rx_alloc {
+	struct page *page;
+	u16 offset;
+};
+
+struct mlx4_en_tx_ring {
+	struct mlx4_hwq_resources wqres;
+	u32 size ; /* number of TXBBs */
+	u32 size_mask;
+	u16 stride;
+	u16 cqn;	/* index of port CQ associated with this ring */
+	u32 prod;
+	u32 cons;
+	u32 buf_size;
+	u32 doorbell_qpn;
+	void *buf;
+	u16 poll_cnt;
+	int blocked;
+	struct mlx4_en_tx_info *tx_info;
+	u8 *bounce_buf;
+	u32 last_nr_txbb;
+	struct mlx4_qp qp;
+	struct mlx4_qp_context context;
+	int qpn;
+	enum mlx4_qp_state qp_state;
+	struct mlx4_srq dummy;
+	unsigned long bytes;
+	unsigned long packets;
+	spinlock_t comp_lock;
+};
+
+struct mlx4_en_rx_desc {
+	struct mlx4_wqe_srq_next_seg next;
+	/* actual number of entries depends on rx ring stride */
+	struct mlx4_wqe_data_seg data[0];
+};
+
+struct mlx4_en_rx_ring {
+	struct mlx4_srq srq;
+	struct mlx4_hwq_resources wqres;
+	struct mlx4_en_rx_alloc page_alloc[MLX4_EN_MAX_RX_FRAGS];
+	struct net_lro_mgr lro;
+	u32 size ;	/* number of Rx descs*/
+	u32 actual_size;
+	u32 size_mask;
+	u16 stride;
+	u16 log_stride;
+	u16 cqn;	/* index of port CQ associated with this ring */
+	u32 prod;
+	u32 cons;
+	u32 buf_size;
+	int need_refill;
+	int full;
+	void *buf;
+	void *rx_info;
+	unsigned long bytes;
+	unsigned long packets;
+};
+
+
+static inline int mlx4_en_can_lro(__be16 status)
+{
+	return (status & cpu_to_be16(MLX4_CQE_STATUS_IPV4	|
+				     MLX4_CQE_STATUS_IPV4F	|
+				     MLX4_CQE_STATUS_IPV6	|
+				     MLX4_CQE_STATUS_IPV4OPT	|
+				     MLX4_CQE_STATUS_TCP	|
+				     MLX4_CQE_STATUS_UDP	|
+				     MLX4_CQE_STATUS_IPOK)) ==
+		cpu_to_be16(MLX4_CQE_STATUS_IPV4 |
+			    MLX4_CQE_STATUS_IPOK |
+			    MLX4_CQE_STATUS_TCP);
+}
+
+struct mlx4_en_cq {
+	struct mlx4_cq          mcq;
+	struct mlx4_hwq_resources wqres;
+	int                     ring;
+	spinlock_t              lock;
+	struct net_device      *dev;
+	struct napi_struct	napi;
+	/* Per-core Tx cq processing support */
+	struct timer_list timer;
+	int size;
+	int buf_size;
+	unsigned vector;
+	enum cq_type is_tx;
+	u16 moder_time;
+	u16 moder_cnt;
+	int armed;
+	struct mlx4_cqe *buf;
+#define MLX4_EN_OPCODE_ERROR	0x1e
+};
+
+struct mlx4_en_port_profile {
+	u32 flags;
+	u32 tx_ring_num;
+	u32 rx_ring_num;
+	u32 tx_ring_size;
+	u32 rx_ring_size;
+};
+
+struct mlx4_en_profile {
+	int rss_xor;
+	int num_lro;
+	u8 rss_mask;
+	u32 active_ports;
+	u32 small_pkt_int;
+	int rx_moder_cnt;
+	int rx_moder_time;
+	int auto_moder;
+	u8 rx_pause;
+	u8 rx_ppp;
+	u8 tx_pause;
+	u8 tx_ppp;
+	u8 no_reset;
+	struct mlx4_en_port_profile prof[MLX4_MAX_PORTS + 1];
+};
+
+struct mlx4_en_dev {
+	struct mlx4_dev         *dev;
+	struct pci_dev		*pdev;
+	struct mutex		state_lock;
+	struct net_device       *pndev[MLX4_MAX_PORTS + 1];
+	u32                     port_cnt;
+	bool			device_up;
+	struct mlx4_en_profile  profile;
+	u32			LSO_support;
+	struct workqueue_struct *workqueue;
+	struct device           *dma_device;
+	void __iomem            *uar_map;
+	struct mlx4_uar         priv_uar;
+	struct mlx4_mr		mr;
+	u32                     priv_pdn;
+	spinlock_t              uar_lock;
+};
+
+
+struct mlx4_en_rss_map {
+	int size;
+	int base_qpn;
+	u16 map[MAX_RSS_MAP_SIZE];
+	struct mlx4_qp qps[MAX_RSS_MAP_SIZE];
+	enum mlx4_qp_state state[MAX_RSS_MAP_SIZE];
+	struct mlx4_qp indir_qp;
+	enum mlx4_qp_state indir_state;
+};
+
+struct mlx4_en_rss_context {
+	__be32 base_qpn;
+	__be32 default_qpn;
+	u16 reserved;
+	u8 hash_fn;
+	u8 flags;
+	__be32 rss_key[10];
+};
+
+struct mlx4_en_pkt_stats {
+	unsigned long broadcast;
+	unsigned long rx_prio[8];
+	unsigned long tx_prio[8];
+#define NUM_PKT_STATS		17
+};
+
+struct mlx4_en_port_stats {
+	unsigned long lro_aggregated;
+	unsigned long lro_flushed;
+	unsigned long lro_no_desc;
+	unsigned long tso_packets;
+	unsigned long queue_stopped;
+	unsigned long wake_queue;
+	unsigned long tx_timeout;
+	unsigned long rx_alloc_failed;
+	unsigned long rx_chksum_good;
+	unsigned long rx_chksum_none;
+	unsigned long tx_chksum_offload;
+#define NUM_PORT_STATS		11
+};
+
+struct mlx4_en_perf_stats {
+	u32 tx_poll;
+	u64 tx_pktsz_avg;
+	u32 inflight_avg;
+	u16 tx_coal_avg;
+	u16 rx_coal_avg;
+	u32 napi_quota;
+#define NUM_PERF_COUNTERS		6
+};
+
+struct mlx4_en_frag_info {
+	u16 frag_size;
+	u16 frag_prefix_size;
+	u16 frag_stride;
+	u16 frag_align;
+	u16 last_offset;
+
+};
+
+struct mlx4_en_priv {
+	struct mlx4_en_dev *mdev;
+	struct mlx4_en_port_profile *prof;
+	struct net_device *dev;
+	struct vlan_group *vlgrp;
+	struct net_device_stats stats;
+	struct net_device_stats ret_stats;
+	spinlock_t stats_lock;
+
+	unsigned long last_moder_packets;
+	unsigned long last_moder_tx_packets;
+	unsigned long last_moder_bytes;
+	unsigned long last_moder_jiffies;
+	int last_moder_time;
+	u16 rx_usecs;
+	u16 rx_frames;
+	u16 tx_usecs;
+	u16 tx_frames;
+	u32 pkt_rate_low;
+	u16 rx_usecs_low;
+	u32 pkt_rate_high;
+	u16 rx_usecs_high;
+	u16 sample_interval;
+	u16 adaptive_rx_coal;
+	u32 msg_enable;
+
+	struct mlx4_hwq_resources res;
+	int link_state;
+	int last_link_state;
+	bool port_up;
+	int port;
+	int registered;
+	int allocated;
+	int stride;
+	int rx_csum;
+	u64 mac;
+	int mac_index;
+	unsigned max_mtu;
+	int base_qpn;
+
+	struct mlx4_en_rss_map rss_map;
+	u16 tx_prio_map[8];
+	u32 flags;
+#define MLX4_EN_FLAG_PROMISC	0x1
+	u32 tx_ring_num;
+	u32 rx_ring_num;
+	u32 rx_skb_size;
+	struct mlx4_en_frag_info frag_info[MLX4_EN_MAX_RX_FRAGS];
+	u16 num_frags;
+	u16 log_rx_info;
+
+	struct mlx4_en_tx_ring tx_ring[MAX_TX_RINGS];
+	struct mlx4_en_rx_ring rx_ring[MAX_RX_RINGS];
+	struct mlx4_en_cq tx_cq[MAX_TX_RINGS];
+	struct mlx4_en_cq rx_cq[MAX_RX_RINGS];
+	struct work_struct mcast_task;
+	struct work_struct mac_task;
+	struct delayed_work refill_task;
+	struct work_struct watchdog_task;
+	struct work_struct linkstate_task;
+	struct delayed_work stats_task;
+	struct mlx4_en_perf_stats pstats;
+	struct mlx4_en_pkt_stats pkstats;
+	struct mlx4_en_port_stats port_stats;
+	struct dev_mc_list *mc_list;
+	struct mlx4_en_stat_out_mbox hw_stats;
+};
+
+
+void mlx4_en_destroy_netdev(struct net_device *dev);
+int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
+			struct mlx4_en_port_profile *prof);
+
+int mlx4_en_get_profile(struct mlx4_en_dev *mdev);
+
+int mlx4_en_create_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq,
+		      int entries, int ring, enum cq_type mode);
+void mlx4_en_destroy_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq);
+int mlx4_en_activate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq);
+void mlx4_en_deactivate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq);
+int mlx4_en_set_cq_moder(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq);
+int mlx4_en_arm_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq);
+
+void mlx4_en_poll_tx_cq(unsigned long data);
+void mlx4_en_tx_irq(struct mlx4_cq *mcq);
+int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev);
+
+int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, struct mlx4_en_tx_ring *ring,
+			   u32 size, u16 stride);
+void mlx4_en_destroy_tx_ring(struct mlx4_en_priv *priv, struct mlx4_en_tx_ring *ring);
+int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv,
+			     struct mlx4_en_tx_ring *ring,
+			     int cq, int srqn);
+void mlx4_en_deactivate_tx_ring(struct mlx4_en_priv *priv,
+				struct mlx4_en_tx_ring *ring);
+
+int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv,
+			   struct mlx4_en_rx_ring *ring,
+			   u32 size, u16 stride);
+void mlx4_en_destroy_rx_ring(struct mlx4_en_priv *priv,
+			     struct mlx4_en_rx_ring *ring);
+int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv);
+void mlx4_en_deactivate_rx_ring(struct mlx4_en_priv *priv,
+				struct mlx4_en_rx_ring *ring);
+int mlx4_en_process_rx_cq(struct net_device *dev,
+			  struct mlx4_en_cq *cq,
+			  int budget);
+int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget);
+void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride,
+			     int is_tx, int rss, int qpn, int cqn, int srqn,
+			     struct mlx4_qp_context *context);
+int mlx4_en_map_buffer(struct mlx4_buf *buf);
+void mlx4_en_unmap_buffer(struct mlx4_buf *buf);
+
+void mlx4_en_calc_rx_buf(struct net_device *dev);
+void mlx4_en_set_default_rss_map(struct mlx4_en_priv *priv,
+				 struct mlx4_en_rss_map *rss_map,
+				 int num_entries, int num_rings);
+void mlx4_en_set_prio_map(struct mlx4_en_priv *priv, u16 *prio_map, u32 ring_num);
+int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv);
+void mlx4_en_release_rss_steer(struct mlx4_en_priv *priv);
+int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring);
+void mlx4_en_rx_refill(struct work_struct *work);
+void mlx4_en_rx_irq(struct mlx4_cq *mcq);
+
+int mlx4_SET_MCAST_FLTR(struct mlx4_dev *dev, u8 port, u64 mac, u64 clear, u8 mode);
+int mlx4_SET_VLAN_FLTR(struct mlx4_dev *dev, u8 port, struct vlan_group *grp);
+int mlx4_SET_PORT_general(struct mlx4_dev *dev, u8 port, int mtu,
+			  u8 pptx, u8 pfctx, u8 pprx, u8 pfcrx);
+int mlx4_SET_PORT_qpn_calc(struct mlx4_dev *dev, u8 port, u32 base_qpn,
+			   u8 promisc);
+
+int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset);
+
+/*
+ * Globals
+ */
+extern const struct ethtool_ops mlx4_en_ethtool_ops;
+#endif
diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c
index d1dd5b4..0caf74c 100644
--- a/drivers/net/mlx4/mr.c
+++ b/drivers/net/mlx4/mr.c
@@ -461,7 +461,7 @@
 	int err;
 
 	err = mlx4_bitmap_init(&mr_table->mpt_bitmap, dev->caps.num_mpts,
-			       ~0, dev->caps.reserved_mrws);
+			       ~0, dev->caps.reserved_mrws, 0);
 	if (err)
 		return err;
 
diff --git a/drivers/net/mlx4/pd.c b/drivers/net/mlx4/pd.c
index aa61689..26d1a7a 100644
--- a/drivers/net/mlx4/pd.c
+++ b/drivers/net/mlx4/pd.c
@@ -62,7 +62,7 @@
 	struct mlx4_priv *priv = mlx4_priv(dev);
 
 	return mlx4_bitmap_init(&priv->pd_bitmap, dev->caps.num_pds,
-				(1 << 24) - 1, dev->caps.reserved_pds);
+				(1 << 24) - 1, dev->caps.reserved_pds, 0);
 }
 
 void mlx4_cleanup_pd_table(struct mlx4_dev *dev)
@@ -100,7 +100,7 @@
 
 	return mlx4_bitmap_init(&mlx4_priv(dev)->uar_table.bitmap,
 				dev->caps.num_uars, dev->caps.num_uars - 1,
-				max(128, dev->caps.reserved_uars));
+				max(128, dev->caps.reserved_uars), 0);
 }
 
 void mlx4_cleanup_uar_table(struct mlx4_dev *dev)
diff --git a/drivers/net/mlx4/port.c b/drivers/net/mlx4/port.c
new file mode 100644
index 0000000..e2fdab4
--- /dev/null
+++ b/drivers/net/mlx4/port.c
@@ -0,0 +1,282 @@
+/*
+ * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/errno.h>
+#include <linux/if_ether.h>
+
+#include <linux/mlx4/cmd.h>
+
+#include "mlx4.h"
+
+#define MLX4_MAC_VALID		(1ull << 63)
+#define MLX4_MAC_MASK		0xffffffffffffULL
+
+#define MLX4_VLAN_VALID		(1u << 31)
+#define MLX4_VLAN_MASK		0xfff
+
+void mlx4_init_mac_table(struct mlx4_dev *dev, struct mlx4_mac_table *table)
+{
+	int i;
+
+	mutex_init(&table->mutex);
+	for (i = 0; i < MLX4_MAX_MAC_NUM; i++) {
+		table->entries[i] = 0;
+		table->refs[i]	 = 0;
+	}
+	table->max   = 1 << dev->caps.log_num_macs;
+	table->total = 0;
+}
+
+void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table)
+{
+	int i;
+
+	mutex_init(&table->mutex);
+	for (i = 0; i < MLX4_MAX_VLAN_NUM; i++) {
+		table->entries[i] = 0;
+		table->refs[i]	 = 0;
+	}
+	table->max   = 1 << dev->caps.log_num_vlans;
+	table->total = 0;
+}
+
+static int mlx4_set_port_mac_table(struct mlx4_dev *dev, u8 port,
+				   __be64 *entries)
+{
+	struct mlx4_cmd_mailbox *mailbox;
+	u32 in_mod;
+	int err;
+
+	mailbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(mailbox))
+		return PTR_ERR(mailbox);
+
+	memcpy(mailbox->buf, entries, MLX4_MAC_TABLE_SIZE);
+
+	in_mod = MLX4_SET_PORT_MAC_TABLE << 8 | port;
+	err = mlx4_cmd(dev, mailbox->dma, in_mod, 1, MLX4_CMD_SET_PORT,
+		       MLX4_CMD_TIME_CLASS_B);
+
+	mlx4_free_cmd_mailbox(dev, mailbox);
+	return err;
+}
+
+int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac, int *index)
+{
+	struct mlx4_mac_table *table = &mlx4_priv(dev)->port[port].mac_table;
+	int i, err = 0;
+	int free = -1;
+
+	mlx4_dbg(dev, "Registering MAC: 0x%llx\n", (unsigned long long) mac);
+	mutex_lock(&table->mutex);
+	for (i = 0; i < MLX4_MAX_MAC_NUM - 1; i++) {
+		if (free < 0 && !table->refs[i]) {
+			free = i;
+			continue;
+		}
+
+		if (mac == (MLX4_MAC_MASK & be64_to_cpu(table->entries[i]))) {
+			/* MAC already registered, increase refernce count */
+			*index = i;
+			++table->refs[i];
+			goto out;
+		}
+	}
+	mlx4_dbg(dev, "Free MAC index is %d\n", free);
+
+	if (table->total == table->max) {
+		/* No free mac entries */
+		err = -ENOSPC;
+		goto out;
+	}
+
+	/* Register new MAC */
+	table->refs[free] = 1;
+	table->entries[free] = cpu_to_be64(mac | MLX4_MAC_VALID);
+
+	err = mlx4_set_port_mac_table(dev, port, table->entries);
+	if (unlikely(err)) {
+		mlx4_err(dev, "Failed adding MAC: 0x%llx\n", (unsigned long long) mac);
+		table->refs[free] = 0;
+		table->entries[free] = 0;
+		goto out;
+	}
+
+	*index = free;
+	++table->total;
+out:
+	mutex_unlock(&table->mutex);
+	return err;
+}
+EXPORT_SYMBOL_GPL(mlx4_register_mac);
+
+void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, int index)
+{
+	struct mlx4_mac_table *table = &mlx4_priv(dev)->port[port].mac_table;
+
+	mutex_lock(&table->mutex);
+	if (!table->refs[index]) {
+		mlx4_warn(dev, "No MAC entry for index %d\n", index);
+		goto out;
+	}
+	if (--table->refs[index]) {
+		mlx4_warn(dev, "Have more references for index %d,"
+			  "no need to modify MAC table\n", index);
+		goto out;
+	}
+	table->entries[index] = 0;
+	mlx4_set_port_mac_table(dev, port, table->entries);
+	--table->total;
+out:
+	mutex_unlock(&table->mutex);
+}
+EXPORT_SYMBOL_GPL(mlx4_unregister_mac);
+
+static int mlx4_set_port_vlan_table(struct mlx4_dev *dev, u8 port,
+				    __be32 *entries)
+{
+	struct mlx4_cmd_mailbox *mailbox;
+	u32 in_mod;
+	int err;
+
+	mailbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(mailbox))
+		return PTR_ERR(mailbox);
+
+	memcpy(mailbox->buf, entries, MLX4_VLAN_TABLE_SIZE);
+	in_mod = MLX4_SET_PORT_VLAN_TABLE << 8 | port;
+	err = mlx4_cmd(dev, mailbox->dma, in_mod, 1, MLX4_CMD_SET_PORT,
+		       MLX4_CMD_TIME_CLASS_B);
+
+	mlx4_free_cmd_mailbox(dev, mailbox);
+
+	return err;
+}
+
+int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index)
+{
+	struct mlx4_vlan_table *table = &mlx4_priv(dev)->port[port].vlan_table;
+	int i, err = 0;
+	int free = -1;
+
+	mutex_lock(&table->mutex);
+	for (i = MLX4_VLAN_REGULAR; i < MLX4_MAX_VLAN_NUM; i++) {
+		if (free < 0 && (table->refs[i] == 0)) {
+			free = i;
+			continue;
+		}
+
+		if (table->refs[i] &&
+		    (vlan == (MLX4_VLAN_MASK &
+			      be32_to_cpu(table->entries[i])))) {
+			/* Vlan already registered, increase refernce count */
+			*index = i;
+			++table->refs[i];
+			goto out;
+		}
+	}
+
+	if (table->total == table->max) {
+		/* No free vlan entries */
+		err = -ENOSPC;
+		goto out;
+	}
+
+	/* Register new MAC */
+	table->refs[free] = 1;
+	table->entries[free] = cpu_to_be32(vlan | MLX4_VLAN_VALID);
+
+	err = mlx4_set_port_vlan_table(dev, port, table->entries);
+	if (unlikely(err)) {
+		mlx4_warn(dev, "Failed adding vlan: %u\n", vlan);
+		table->refs[free] = 0;
+		table->entries[free] = 0;
+		goto out;
+	}
+
+	*index = free;
+	++table->total;
+out:
+	mutex_unlock(&table->mutex);
+	return err;
+}
+EXPORT_SYMBOL_GPL(mlx4_register_vlan);
+
+void mlx4_unregister_vlan(struct mlx4_dev *dev, u8 port, int index)
+{
+	struct mlx4_vlan_table *table = &mlx4_priv(dev)->port[port].vlan_table;
+
+	if (index < MLX4_VLAN_REGULAR) {
+		mlx4_warn(dev, "Trying to free special vlan index %d\n", index);
+		return;
+	}
+
+	mutex_lock(&table->mutex);
+	if (!table->refs[index]) {
+		mlx4_warn(dev, "No vlan entry for index %d\n", index);
+		goto out;
+	}
+	if (--table->refs[index]) {
+		mlx4_dbg(dev, "Have more references for index %d,"
+			 "no need to modify vlan table\n", index);
+		goto out;
+	}
+	table->entries[index] = 0;
+	mlx4_set_port_vlan_table(dev, port, table->entries);
+	--table->total;
+out:
+	mutex_unlock(&table->mutex);
+}
+EXPORT_SYMBOL_GPL(mlx4_unregister_vlan);
+
+int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port)
+{
+	struct mlx4_cmd_mailbox *mailbox;
+	int err;
+	u8 is_eth = dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH;
+
+	mailbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(mailbox))
+		return PTR_ERR(mailbox);
+
+	memset(mailbox->buf, 0, 256);
+	if (is_eth) {
+		((u8 *) mailbox->buf)[3] = 6;
+		((__be16 *) mailbox->buf)[4] = cpu_to_be16(1 << 15);
+		((__be16 *) mailbox->buf)[6] = cpu_to_be16(1 << 15);
+	}
+	err = mlx4_cmd(dev, mailbox->dma, port, is_eth, MLX4_CMD_SET_PORT,
+		       MLX4_CMD_TIME_CLASS_B);
+
+	mlx4_free_cmd_mailbox(dev, mailbox);
+	return err;
+}
diff --git a/drivers/net/mlx4/qp.c b/drivers/net/mlx4/qp.c
index c49a860..1c565ef 100644
--- a/drivers/net/mlx4/qp.c
+++ b/drivers/net/mlx4/qp.c
@@ -147,19 +147,42 @@
 }
 EXPORT_SYMBOL_GPL(mlx4_qp_modify);
 
-int mlx4_qp_alloc(struct mlx4_dev *dev, int sqpn, struct mlx4_qp *qp)
+int mlx4_qp_reserve_range(struct mlx4_dev *dev, int cnt, int align, int *base)
+{
+	struct mlx4_priv *priv = mlx4_priv(dev);
+	struct mlx4_qp_table *qp_table = &priv->qp_table;
+	int qpn;
+
+	qpn = mlx4_bitmap_alloc_range(&qp_table->bitmap, cnt, align);
+	if (qpn == -1)
+		return -ENOMEM;
+
+	*base = qpn;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mlx4_qp_reserve_range);
+
+void mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt)
+{
+	struct mlx4_priv *priv = mlx4_priv(dev);
+	struct mlx4_qp_table *qp_table = &priv->qp_table;
+	if (base_qpn < dev->caps.sqp_start + 8)
+		return;
+
+	mlx4_bitmap_free_range(&qp_table->bitmap, base_qpn, cnt);
+}
+EXPORT_SYMBOL_GPL(mlx4_qp_release_range);
+
+int mlx4_qp_alloc(struct mlx4_dev *dev, int qpn, struct mlx4_qp *qp)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	struct mlx4_qp_table *qp_table = &priv->qp_table;
 	int err;
 
-	if (sqpn)
-		qp->qpn = sqpn;
-	else {
-		qp->qpn = mlx4_bitmap_alloc(&qp_table->bitmap);
-		if (qp->qpn == -1)
-			return -ENOMEM;
-	}
+	if (!qpn)
+		return -EINVAL;
+
+	qp->qpn = qpn;
 
 	err = mlx4_table_get(dev, &qp_table->qp_table, qp->qpn);
 	if (err)
@@ -208,9 +231,6 @@
 	mlx4_table_put(dev, &qp_table->qp_table, qp->qpn);
 
 err_out:
-	if (!sqpn)
-		mlx4_bitmap_free(&qp_table->bitmap, qp->qpn);
-
 	return err;
 }
 EXPORT_SYMBOL_GPL(mlx4_qp_alloc);
@@ -239,9 +259,6 @@
 	mlx4_table_put(dev, &qp_table->altc_table, qp->qpn);
 	mlx4_table_put(dev, &qp_table->auxc_table, qp->qpn);
 	mlx4_table_put(dev, &qp_table->qp_table, qp->qpn);
-
-	if (qp->qpn >= dev->caps.sqp_start + 8)
-		mlx4_bitmap_free(&qp_table->bitmap, qp->qpn);
 }
 EXPORT_SYMBOL_GPL(mlx4_qp_free);
 
@@ -255,6 +272,7 @@
 {
 	struct mlx4_qp_table *qp_table = &mlx4_priv(dev)->qp_table;
 	int err;
+	int reserved_from_top = 0;
 
 	spin_lock_init(&qp_table->lock);
 	INIT_RADIX_TREE(&dev->qp_table_tree, GFP_ATOMIC);
@@ -264,9 +282,40 @@
 	 * block of special QPs must be aligned to a multiple of 8, so
 	 * round up.
 	 */
-	dev->caps.sqp_start = ALIGN(dev->caps.reserved_qps, 8);
+	dev->caps.sqp_start =
+		ALIGN(dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], 8);
+
+	{
+		int sort[MLX4_NUM_QP_REGION];
+		int i, j, tmp;
+		int last_base = dev->caps.num_qps;
+
+		for (i = 1; i < MLX4_NUM_QP_REGION; ++i)
+			sort[i] = i;
+
+		for (i = MLX4_NUM_QP_REGION; i > 0; --i) {
+			for (j = 2; j < i; ++j) {
+				if (dev->caps.reserved_qps_cnt[sort[j]] >
+				    dev->caps.reserved_qps_cnt[sort[j - 1]]) {
+					tmp             = sort[j];
+					sort[j]         = sort[j - 1];
+					sort[j - 1]     = tmp;
+				}
+			}
+		}
+
+		for (i = 1; i < MLX4_NUM_QP_REGION; ++i) {
+			last_base -= dev->caps.reserved_qps_cnt[sort[i]];
+			dev->caps.reserved_qps_base[sort[i]] = last_base;
+			reserved_from_top +=
+				dev->caps.reserved_qps_cnt[sort[i]];
+		}
+
+	}
+
 	err = mlx4_bitmap_init(&qp_table->bitmap, dev->caps.num_qps,
-			       (1 << 24) - 1, dev->caps.sqp_start + 8);
+			       (1 << 23) - 1, dev->caps.sqp_start + 8,
+			       reserved_from_top);
 	if (err)
 		return err;
 
diff --git a/drivers/net/mlx4/srq.c b/drivers/net/mlx4/srq.c
index 533eb6d..fe9f218 100644
--- a/drivers/net/mlx4/srq.c
+++ b/drivers/net/mlx4/srq.c
@@ -245,7 +245,7 @@
 	INIT_RADIX_TREE(&srq_table->tree, GFP_ATOMIC);
 
 	err = mlx4_bitmap_init(&srq_table->bitmap, dev->caps.num_srqs,
-			       dev->caps.num_srqs - 1, dev->caps.reserved_srqs);
+			       dev->caps.num_srqs - 1, dev->caps.reserved_srqs, 0);
 	if (err)
 		return err;
 
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index a9aebad..b1556b2 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -75,7 +75,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.4.3-1.369"
+#define MYRI10GE_VERSION_STR "1.4.3-1.371"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -2497,6 +2497,10 @@
 	return 0;
 
 abort_with_rings:
+	while (slice) {
+		slice--;
+		napi_disable(&mgp->ss[slice].napi);
+	}
 	for (i = 0; i < mgp->num_slices; i++)
 		myri10ge_free_rings(&mgp->ss[i]);
 
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 38116f9..ba2e1c5b 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -1375,7 +1375,6 @@
 	spinlock_t adapter_lock;
 	spinlock_t hw_lock;
 	spinlock_t stats_lock;
-	spinlock_t legacy_lock;	/* used for maintaining legacy intr sync */
 
 	/* PCI Bus Relative Register Addresses */
 	void __iomem *reg_base;
@@ -1399,8 +1398,6 @@
 	struct msix_entry *msi_x_entry;
 	struct intr_context intr_context[MAX_RX_RINGS];
 
-	int (*legacy_check) (struct ql_adapter *);
-
 	int tx_ring_count;	/* One per online CPU. */
 	u32 rss_ring_first_cq_id;/* index of first inbound (rss) rx_ring */
 	u32 rss_ring_count;	/* One per online CPU.  */
@@ -1502,7 +1499,7 @@
 void ql_mpi_reset_work(struct work_struct *work);
 int ql_wait_reg_rdy(struct ql_adapter *qdev, u32 reg, u32 bit, u32 ebit);
 void ql_queue_asic_error(struct ql_adapter *qdev);
-void ql_enable_completion_interrupt(struct ql_adapter *qdev, u32 intr);
+u32 ql_enable_completion_interrupt(struct ql_adapter *qdev, u32 intr);
 void ql_set_ethtool_ops(struct net_device *ndev);
 int ql_read_xgmac_reg64(struct ql_adapter *qdev, u32 reg, u64 *data);
 
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 4b2caa6..b83a9c9 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -577,41 +577,53 @@
  * incremented everytime we queue a worker and decremented everytime
  * a worker finishes.  Once it hits zero we enable the interrupt.
  */
-void ql_enable_completion_interrupt(struct ql_adapter *qdev, u32 intr)
+u32 ql_enable_completion_interrupt(struct ql_adapter *qdev, u32 intr)
 {
-	if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags)))
+	u32 var = 0;
+	unsigned long hw_flags = 0;
+	struct intr_context *ctx = qdev->intr_context + intr;
+
+	if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags) && intr)) {
+		/* Always enable if we're MSIX multi interrupts and
+		 * it's not the default (zeroeth) interrupt.
+		 */
 		ql_write32(qdev, INTR_EN,
-			   qdev->intr_context[intr].intr_en_mask);
-	else {
-		if (qdev->legacy_check)
-			spin_lock(&qdev->legacy_lock);
-		if (atomic_dec_and_test(&qdev->intr_context[intr].irq_cnt)) {
-			QPRINTK(qdev, INTR, ERR, "Enabling interrupt %d.\n",
-				intr);
-			ql_write32(qdev, INTR_EN,
-				   qdev->intr_context[intr].intr_en_mask);
-		} else {
-			QPRINTK(qdev, INTR, ERR,
-				"Skip enable, other queue(s) are active.\n");
-		}
-		if (qdev->legacy_check)
-			spin_unlock(&qdev->legacy_lock);
+			   ctx->intr_en_mask);
+		var = ql_read32(qdev, STS);
+		return var;
 	}
+
+	spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+	if (atomic_dec_and_test(&ctx->irq_cnt)) {
+		ql_write32(qdev, INTR_EN,
+			   ctx->intr_en_mask);
+		var = ql_read32(qdev, STS);
+	}
+	spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+	return var;
 }
 
 static u32 ql_disable_completion_interrupt(struct ql_adapter *qdev, u32 intr)
 {
 	u32 var = 0;
+	unsigned long hw_flags;
+	struct intr_context *ctx;
 
-	if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags)))
-		goto exit;
-	else if (!atomic_read(&qdev->intr_context[intr].irq_cnt)) {
+	/* HW disables for us if we're MSIX multi interrupts and
+	 * it's not the default (zeroeth) interrupt.
+	 */
+	if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags) && intr))
+		return 0;
+
+	ctx = qdev->intr_context + intr;
+	spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+	if (!atomic_read(&ctx->irq_cnt)) {
 		ql_write32(qdev, INTR_EN,
-			   qdev->intr_context[intr].intr_dis_mask);
+		ctx->intr_dis_mask);
 		var = ql_read32(qdev, STS);
 	}
-	atomic_inc(&qdev->intr_context[intr].irq_cnt);
-exit:
+	atomic_inc(&ctx->irq_cnt);
+	spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
 	return var;
 }
 
@@ -623,7 +635,9 @@
 		 * and enables only if the result is zero.
 		 * So we precharge it here.
 		 */
-		atomic_set(&qdev->intr_context[i].irq_cnt, 1);
+		if (unlikely(!test_bit(QL_MSIX_ENABLED, &qdev->flags) ||
+			i == 0))
+			atomic_set(&qdev->intr_context[i].irq_cnt, 1);
 		ql_enable_completion_interrupt(qdev, i);
 	}
 
@@ -1725,19 +1739,6 @@
 	return IRQ_HANDLED;
 }
 
-/* We check here to see if we're already handling a legacy
- * interrupt.  If we are, then it must belong to another
- * chip with which we're sharing the interrupt line.
- */
-int ql_legacy_check(struct ql_adapter *qdev)
-{
-	int err;
-	spin_lock(&qdev->legacy_lock);
-	err = atomic_read(&qdev->intr_context[0].irq_cnt);
-	spin_unlock(&qdev->legacy_lock);
-	return err;
-}
-
 /* This handles a fatal error, MPI activity, and the default
  * rx_ring in an MSI-X multiple vector environment.
  * In MSI/Legacy environment it also process the rest of
@@ -1752,12 +1753,15 @@
 	int i;
 	int work_done = 0;
 
-	if (qdev->legacy_check && qdev->legacy_check(qdev)) {
-		QPRINTK(qdev, INTR, INFO, "Already busy, not our interrupt.\n");
-		return IRQ_NONE;	/* Not our interrupt */
+	spin_lock(&qdev->hw_lock);
+	if (atomic_read(&qdev->intr_context[0].irq_cnt)) {
+		QPRINTK(qdev, INTR, DEBUG, "Shared Interrupt, Not ours!\n");
+		spin_unlock(&qdev->hw_lock);
+		return IRQ_NONE;
 	}
+	spin_unlock(&qdev->hw_lock);
 
-	var = ql_read32(qdev, STS);
+	var = ql_disable_completion_interrupt(qdev, intr_context->intr);
 
 	/*
 	 * Check for fatal error.
@@ -1823,6 +1827,7 @@
 			}
 		}
 	}
+	ql_enable_completion_interrupt(qdev, intr_context->intr);
 	return work_done ? IRQ_HANDLED : IRQ_NONE;
 }
 
@@ -2701,8 +2706,6 @@
 		}
 	}
 	irq_type = LEG_IRQ;
-	spin_lock_init(&qdev->legacy_lock);
-	qdev->legacy_check = ql_legacy_check;
 	QPRINTK(qdev, IFUP, DEBUG, "Running with legacy interrupts.\n");
 }
 
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index c821da2..4b7cb38 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -81,6 +81,10 @@
 #define RTL8169_TX_TIMEOUT	(6*HZ)
 #define RTL8169_PHY_TIMEOUT	(10*HZ)
 
+#define RTL_EEPROM_SIG		cpu_to_le32(0x8129)
+#define RTL_EEPROM_SIG_MASK	cpu_to_le32(0xffff)
+#define RTL_EEPROM_SIG_ADDR	0x0000
+
 /* write/read MMIO register */
 #define RTL_W8(reg, val8)	writeb ((val8), ioaddr + (reg))
 #define RTL_W16(reg, val16)	writew ((val16), ioaddr + (reg))
@@ -1911,74 +1915,6 @@
 	}
 }
 
-static int rtl_eeprom_read(struct pci_dev *pdev, int cap, int addr, __le32 *val)
-{
-	int ret, count = 100;
-	u16 status = 0;
-	u32 value;
-
-	ret = pci_write_config_word(pdev, cap + PCI_VPD_ADDR, addr);
-	if (ret < 0)
-		return ret;
-
-	do {
-		udelay(10);
-		ret = pci_read_config_word(pdev, cap + PCI_VPD_ADDR, &status);
-		if (ret < 0)
-			return ret;
-	} while (!(status & PCI_VPD_ADDR_F) && --count);
-
-	if (!(status & PCI_VPD_ADDR_F))
-		return -ETIMEDOUT;
-
-	ret = pci_read_config_dword(pdev, cap + PCI_VPD_DATA, &value);
-	if (ret < 0)
-		return ret;
-
-	*val = cpu_to_le32(value);
-
-	return 0;
-}
-
-static void rtl_init_mac_address(struct rtl8169_private *tp,
-				 void __iomem *ioaddr)
-{
-	struct pci_dev *pdev = tp->pci_dev;
-	u8 cfg1;
-	int vpd_cap;
-	u8 mac[8];
-	DECLARE_MAC_BUF(buf);
-
-	cfg1 = RTL_R8(Config1);
-	if (!(cfg1  & VPD)) {
-		dprintk("VPD access not enabled, enabling\n");
-		RTL_W8(Cfg9346, Cfg9346_Unlock);
-		RTL_W8(Config1, cfg1 | VPD);
-		RTL_W8(Cfg9346, Cfg9346_Lock);
-	}
-
-	vpd_cap = pci_find_capability(pdev, PCI_CAP_ID_VPD);
-	if (!vpd_cap)
-		return;
-
-	/* MAC address is stored in EEPROM at offset 0x0e
-	 * Realtek says: "The VPD address does not have to be a DWORD-aligned
-	 * address as defined in the PCI 2.2 Specifications, but the VPD data
-	 * is always consecutive 4-byte data starting from the VPD address
-	 * specified."
-	 */
-	if (rtl_eeprom_read(pdev, vpd_cap, 0x000e, (__le32*)&mac[0]) < 0 ||
-	    rtl_eeprom_read(pdev, vpd_cap, 0x0012, (__le32*)&mac[4]) < 0) {
-		dprintk("Reading MAC address from EEPROM failed\n");
-		return;
-	}
-
-	dprintk("MAC address found in EEPROM: %s\n", print_mac(buf, mac));
-
-	/* Write MAC address */
-	rtl_rar_set(tp, mac);
-}
-
 static int __devinit
 rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
@@ -2156,8 +2092,6 @@
 
 	tp->mmio_addr = ioaddr;
 
-	rtl_init_mac_address(tp, ioaddr);
-
 	/* Get MAC address */
 	for (i = 0; i < MAC_ADDR_LEN; i++)
 		dev->dev_addr[i] = RTL_R8(MAC0 + i);
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 3fe0176..e6e3bf5 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -317,6 +317,7 @@
         unsigned int type;
 	u32 feature;
 } mii_chip_table[] = {
+	{ "Atheros PHY AR8012",   { 0x004d, 0xd020 }, LAN, 0 },
 	{ "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN, F_PHY_BCM5461 },
 	{ "Broadcom PHY AC131",   { 0x0143, 0xbc70 }, LAN, 0 },
 	{ "Agere PHY ET1101B",    { 0x0282, 0xf010 }, LAN, 0 },
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 8aa7460..f59c777 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -155,23 +155,17 @@
 /* this enables an interrupt in the interrupt mask register */
 #define SMC_ENABLE_INT(lp, x) do {			\
 	unsigned int  __mask;				\
-	unsigned long __flags;				\
-	spin_lock_irqsave(&lp->lock, __flags);		\
 	__mask = SMC_GET_INT_EN((lp));			\
 	__mask |= (x);					\
 	SMC_SET_INT_EN((lp), __mask);			\
-	spin_unlock_irqrestore(&lp->lock, __flags);	\
 } while (0)
 
 /* this disables an interrupt from the interrupt mask register */
 #define SMC_DISABLE_INT(lp, x) do {			\
 	unsigned int  __mask;				\
-	unsigned long __flags;				\
-	spin_lock_irqsave(&lp->lock, __flags);		\
 	__mask = SMC_GET_INT_EN((lp));			\
 	__mask &= ~(x);					\
 	SMC_SET_INT_EN((lp), __mask);			\
-	spin_unlock_irqrestore(&lp->lock, __flags);	\
 } while (0)
 
 /*
@@ -180,7 +174,7 @@
 static void smc911x_reset(struct net_device *dev)
 {
 	struct smc911x_local *lp = netdev_priv(dev);
-	unsigned int reg, timeout=0, resets=1;
+	unsigned int reg, timeout=0, resets=1, irq_cfg;
 	unsigned long flags;
 
 	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
@@ -252,7 +246,12 @@
 	 * Deassert IRQ for 1*10us for edge type interrupts
 	 * and drive IRQ pin push-pull
 	 */
-	SMC_SET_IRQ_CFG(lp, (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_);
+	irq_cfg = (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_;
+#ifdef SMC_DYNAMIC_BUS_CONFIG
+	if (lp->cfg.irq_polarity)
+		irq_cfg |= INT_CFG_IRQ_POL_;
+#endif
+	SMC_SET_IRQ_CFG(lp, irq_cfg);
 
 	/* clear anything saved */
 	if (lp->pending_tx_skb != NULL) {
@@ -274,6 +273,8 @@
 
 	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__);
 
+	spin_lock_irqsave(&lp->lock, flags);
+
 	SMC_SET_MAC_ADDR(lp, dev->dev_addr);
 
 	/* Enable TX */
@@ -286,12 +287,10 @@
 	SMC_SET_FIFO_TSL(lp, 64);
 	SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000);
 
-	spin_lock_irqsave(&lp->lock, flags);
 	SMC_GET_MAC_CR(lp, cr);
 	cr |= MAC_CR_TXEN_ | MAC_CR_HBDIS_;
 	SMC_SET_MAC_CR(lp, cr);
 	SMC_SET_TX_CFG(lp, TX_CFG_TX_ON_);
-	spin_unlock_irqrestore(&lp->lock, flags);
 
 	/* Add 2 byte padding to start of packets */
 	SMC_SET_RX_CFG(lp, (2<<8) & RX_CFG_RXDOFF_);
@@ -300,9 +299,7 @@
 	if (cr & MAC_CR_RXEN_)
 		DBG(SMC_DEBUG_RX, "%s: Receiver already enabled\n", dev->name);
 
-	spin_lock_irqsave(&lp->lock, flags);
 	SMC_SET_MAC_CR(lp, cr | MAC_CR_RXEN_);
-	spin_unlock_irqrestore(&lp->lock, flags);
 
 	/* Interrupt on every received packet */
 	SMC_SET_FIFO_RSA(lp, 0x01);
@@ -318,6 +315,8 @@
 		mask|=INT_EN_RDFO_EN_;
 	}
 	SMC_ENABLE_INT(lp, mask);
+
+	spin_unlock_irqrestore(&lp->lock, flags);
 }
 
 /*
@@ -458,7 +457,6 @@
 	struct sk_buff *skb;
 	unsigned int cmdA, cmdB, len;
 	unsigned char *buf;
-	unsigned long flags;
 
 	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", dev->name, __func__);
 	BUG_ON(lp->pending_tx_skb == NULL);
@@ -503,11 +501,9 @@
 	dev->trans_start = jiffies;
 	dev_kfree_skb(skb);
 #endif
-	spin_lock_irqsave(&lp->lock, flags);
 	if (!lp->tx_throttle) {
 		netif_wake_queue(dev);
 	}
-	spin_unlock_irqrestore(&lp->lock, flags);
 	SMC_ENABLE_INT(lp, INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_);
 }
 
@@ -526,6 +522,8 @@
 	DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n",
 		dev->name, __func__);
 
+	spin_lock_irqsave(&lp->lock, flags);
+
 	BUG_ON(lp->pending_tx_skb != NULL);
 
 	free = SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TDFREE_;
@@ -535,12 +533,10 @@
 	if (free <= SMC911X_TX_FIFO_LOW_THRESHOLD) {
 		DBG(SMC_DEBUG_TX, "%s: Disabling data flow due to low FIFO space (%d)\n",
 			dev->name, free);
-		spin_lock_irqsave(&lp->lock, flags);
 		/* Reenable when at least 1 packet of size MTU present */
 		SMC_SET_FIFO_TDA(lp, (SMC911X_TX_FIFO_LOW_THRESHOLD)/64);
 		lp->tx_throttle = 1;
 		netif_stop_queue(dev);
-		spin_unlock_irqrestore(&lp->lock, flags);
 	}
 
 	/* Drop packets when we run out of space in TX FIFO
@@ -556,6 +552,7 @@
 		lp->pending_tx_skb = NULL;
 		dev->stats.tx_errors++;
 		dev->stats.tx_dropped++;
+		spin_unlock_irqrestore(&lp->lock, flags);
 		dev_kfree_skb(skb);
 		return 0;
 	}
@@ -565,7 +562,6 @@
 		/* If the DMA is already running then defer this packet Tx until
 		 * the DMA IRQ starts it
 		 */
-		spin_lock_irqsave(&lp->lock, flags);
 		if (lp->txdma_active) {
 			DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Tx DMA running, deferring packet\n", dev->name);
 			lp->pending_tx_skb = skb;
@@ -576,11 +572,11 @@
 			DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Activating Tx DMA\n", dev->name);
 			lp->txdma_active = 1;
 		}
-		spin_unlock_irqrestore(&lp->lock, flags);
 	}
 #endif
 	lp->pending_tx_skb = skb;
 	smc911x_hardware_send_pkt(dev);
+	spin_unlock_irqrestore(&lp->lock, flags);
 
 	return 0;
 }
@@ -1242,7 +1238,7 @@
 	netif_rx(skb);
 
 	spin_lock_irqsave(&lp->lock, flags);
-	pkts = (SMC_GET_RX_FIFO_INF() & RX_FIFO_INF_RXSUSED_) >> 16;
+	pkts = (SMC_GET_RX_FIFO_INF(lp) & RX_FIFO_INF_RXSUSED_) >> 16;
 	if (pkts != 0) {
 		smc911x_rcv(dev);
 	}else {
@@ -2054,7 +2050,7 @@
  */
 static int smc911x_drv_probe(struct platform_device *pdev)
 {
-	struct smc91x_platdata *pd = pdev->dev.platform_data;
+	struct smc911x_platdata *pd = pdev->dev.platform_data;
 	struct net_device *ndev;
 	struct resource *res;
 	struct smc911x_local *lp;
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index bf6240f..cc7d85b 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -50,6 +50,10 @@
 #define SMC_DYNAMIC_BUS_CONFIG
 #endif
 
+#ifdef SMC_USE_PXA_DMA
+#define SMC_USE_DMA
+#endif
+
 /* store this information for the driver.. */
 struct smc911x_local {
 	/*
@@ -196,8 +200,6 @@
 
 
 #ifdef SMC_USE_PXA_DMA
-#define SMC_USE_DMA
-
 /*
  * Define the request and free functions
  * These are unfortunately architecture specific as no generic allocation
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 9b95c40..0f1d6bd 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -340,9 +340,9 @@
 }
 
 /* Interrupt handling */
-static int 	ath5k_init(struct ath5k_softc *sc);
+static int 	ath5k_init(struct ath5k_softc *sc, bool is_resume);
 static int 	ath5k_stop_locked(struct ath5k_softc *sc);
-static int 	ath5k_stop_hw(struct ath5k_softc *sc);
+static int 	ath5k_stop_hw(struct ath5k_softc *sc, bool is_suspend);
 static irqreturn_t ath5k_intr(int irq, void *dev_id);
 static void 	ath5k_tasklet_reset(unsigned long data);
 
@@ -646,7 +646,7 @@
 
 	ath5k_led_off(sc);
 
-	ath5k_stop_hw(sc);
+	ath5k_stop_hw(sc, true);
 
 	free_irq(pdev->irq, sc);
 	pci_save_state(pdev);
@@ -683,7 +683,7 @@
 		goto err_no_irq;
 	}
 
-	err = ath5k_init(sc);
+	err = ath5k_init(sc, true);
 	if (err)
 		goto err_irq;
 	ath5k_led_enable(sc);
@@ -2200,12 +2200,17 @@
 \********************/
 
 static int
-ath5k_init(struct ath5k_softc *sc)
+ath5k_init(struct ath5k_softc *sc, bool is_resume)
 {
 	int ret;
 
 	mutex_lock(&sc->lock);
 
+	if (is_resume && !test_bit(ATH_STAT_STARTED, sc->status))
+		goto out_ok;
+
+	__clear_bit(ATH_STAT_STARTED, sc->status);
+
 	ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode);
 
 	/*
@@ -2230,12 +2235,15 @@
 	if (ret)
 		goto done;
 
+	__set_bit(ATH_STAT_STARTED, sc->status);
+
 	/* Set ack to be sent at low bit-rates */
 	ath5k_hw_set_ack_bitrate_high(sc->ah, false);
 
 	mod_timer(&sc->calib_tim, round_jiffies(jiffies +
 			msecs_to_jiffies(ath5k_calinterval * 1000)));
 
+out_ok:
 	ret = 0;
 done:
 	mmiowb();
@@ -2290,7 +2298,7 @@
  * stop is preempted).
  */
 static int
-ath5k_stop_hw(struct ath5k_softc *sc)
+ath5k_stop_hw(struct ath5k_softc *sc, bool is_suspend)
 {
 	int ret;
 
@@ -2321,6 +2329,9 @@
 		}
 	}
 	ath5k_txbuf_free(sc, sc->bbuf);
+	if (!is_suspend)
+		__clear_bit(ATH_STAT_STARTED, sc->status);
+
 	mmiowb();
 	mutex_unlock(&sc->lock);
 
@@ -2718,12 +2729,12 @@
 
 static int ath5k_start(struct ieee80211_hw *hw)
 {
-	return ath5k_init(hw->priv);
+	return ath5k_init(hw->priv, false);
 }
 
 static void ath5k_stop(struct ieee80211_hw *hw)
 {
-	ath5k_stop_hw(hw->priv);
+	ath5k_stop_hw(hw->priv, false);
 }
 
 static int ath5k_add_interface(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h
index 9d0b728..06d1054 100644
--- a/drivers/net/wireless/ath5k/base.h
+++ b/drivers/net/wireless/ath5k/base.h
@@ -128,11 +128,12 @@
 	size_t			desc_len;	/* size of TX/RX descriptors */
 	u16			cachelsz;	/* cache line size */
 
-	DECLARE_BITMAP(status, 4);
+	DECLARE_BITMAP(status, 5);
 #define ATH_STAT_INVALID	0		/* disable hardware accesses */
 #define ATH_STAT_MRRETRY	1		/* multi-rate retry support */
 #define ATH_STAT_PROMISC	2
 #define ATH_STAT_LEDSOFT	3		/* enable LED gpio status */
+#define ATH_STAT_STARTED	4		/* opened & irqs enabled */
 
 	unsigned int		filter_flags;	/* HW flags, AR5K_RX_FILTER_* */
 	unsigned int		curmode;	/* current phy mode */
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index 5749f22..079e6aa 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -328,7 +328,7 @@
 		lbs_deb_rx("rx err: frame received with bad length\n");
 		priv->stats.rx_length_errors++;
 		ret = -EINVAL;
-		kfree(skb);
+		kfree_skb(skb);
 		goto done;
 	}
 
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 5090477..e0512e4 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -433,7 +433,7 @@
 const static struct fw_info orinoco_fw[] = {
 	{ "", "agere_sta_fw.bin", "agere_ap_fw.bin", 0x00390000, 1000 },
 	{ "", "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 },
-	{ "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", "", 0x00003100, 0x100 }
+	{ "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", "", 0x00003100, 512 }
 };
 
 /* Structure used to access fields in FW
@@ -458,7 +458,7 @@
 		    int ap)
 {
 	/* Plug Data Area (PDA) */
-	__le16 pda[512] = { 0 };
+	__le16 *pda;
 
 	hermes_t *hw = &priv->hw;
 	const struct firmware *fw_entry;
@@ -467,7 +467,11 @@
 	const unsigned char *end;
 	const char *firmware;
 	struct net_device *dev = priv->ndev;
-	int err;
+	int err = 0;
+
+	pda = kzalloc(fw->pda_size, GFP_KERNEL);
+	if (!pda)
+		return -ENOMEM;
 
 	if (ap)
 		firmware = fw->ap_fw;
@@ -478,17 +482,17 @@
 	       dev->name, firmware);
 
 	/* Read current plug data */
-	err = hermes_read_pda(hw, pda, fw->pda_addr,
-			      min_t(u16, fw->pda_size, sizeof(pda)), 0);
+	err = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 0);
 	printk(KERN_DEBUG "%s: Read PDA returned %d\n", dev->name, err);
 	if (err)
-		return err;
+		goto free;
 
 	err = request_firmware(&fw_entry, firmware, priv->dev);
 	if (err) {
 		printk(KERN_ERR "%s: Cannot find firmware %s\n",
 		       dev->name, firmware);
-		return -ENOENT;
+		err = -ENOENT;
+		goto free;
 	}
 
 	hdr = (const struct orinoco_fw_header *) fw_entry->data;
@@ -532,6 +536,9 @@
 
 abort:
 	release_firmware(fw_entry);
+
+free:
+	kfree(pda);
 	return err;
 }
 
@@ -549,12 +556,12 @@
 		int secondary)
 {
 	hermes_t *hw = &priv->hw;
-	int ret;
+	int ret = 0;
 	const unsigned char *ptr;
 	const unsigned char *first_block;
 
 	/* Plug Data Area (PDA) */
-	__le16 pda[256];
+	__le16 *pda = NULL;
 
 	/* Binary block begins after the 0x1A marker */
 	ptr = image;
@@ -563,28 +570,33 @@
 
 	/* Read the PDA from EEPROM */
 	if (secondary) {
-		ret = hermes_read_pda(hw, pda, fw->pda_addr, sizeof(pda), 1);
+		pda = kzalloc(fw->pda_size, GFP_KERNEL);
+		if (!pda)
+			return -ENOMEM;
+
+		ret = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 1);
 		if (ret)
-			return ret;
+			goto free;
 	}
 
 	/* Stop the firmware, so that it can be safely rewritten */
 	if (priv->stop_fw) {
 		ret = priv->stop_fw(priv, 1);
 		if (ret)
-			return ret;
+			goto free;
 	}
 
 	/* Program the adapter with new firmware */
 	ret = hermes_program(hw, first_block, end);
 	if (ret)
-		return ret;
+		goto free;
 
 	/* Write the PDA to the adapter */
 	if (secondary) {
 		size_t len = hermes_blocks_length(first_block);
 		ptr = first_block + len;
 		ret = hermes_apply_pda(hw, ptr, pda);
+		kfree(pda);
 		if (ret)
 			return ret;
 	}
@@ -608,6 +620,10 @@
 		return -ENODEV;
 
 	return 0;
+
+free:
+	kfree(pda);
+	return ret;
 }
 
 
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 117c7d3..2d022f8 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -306,8 +306,8 @@
 	return 0;
 }
 
-static const char *p54_rf_chips[] = { "NULL", "Indigo?", "Duette",
-                              "Frisbee", "Xbow", "Longbow" };
+static const char *p54_rf_chips[] = { "NULL", "Duette3", "Duette2",
+                              "Frisbee", "Xbow", "Longbow", "NULL", "NULL" };
 static int p54_init_xbow_synth(struct ieee80211_hw *dev);
 
 static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
@@ -319,6 +319,7 @@
 	void *tmp;
 	int err;
 	u8 *end = (u8 *)eeprom + len;
+	u16 synth;
 	DECLARE_MAC_BUF(mac);
 
 	wrap = (struct eeprom_pda_wrap *) eeprom;
@@ -400,8 +401,8 @@
 			tmp = entry->data;
 			while ((u8 *)tmp < entry->data + data_len) {
 				struct bootrec_exp_if *exp_if = tmp;
-				if (le16_to_cpu(exp_if->if_id) == 0xF)
-					priv->rxhw = le16_to_cpu(exp_if->variant) & 0x07;
+				if (le16_to_cpu(exp_if->if_id) == 0xf)
+					synth = le16_to_cpu(exp_if->variant);
 				tmp += sizeof(struct bootrec_exp_if);
 			}
 			break;
@@ -427,22 +428,13 @@
 		goto err;
 	}
 
-	switch (priv->rxhw) {
-	case 4: /* XBow */
+	priv->rxhw = synth & 0x07;
+	if (priv->rxhw == 4)
 		p54_init_xbow_synth(dev);
-	case 1: /* Indigo? */
-	case 2: /* Duette */
-		dev->wiphy->bands[IEEE80211_BAND_5GHZ] = &band_5GHz;
-	case 3: /* Frisbee */
-	case 5: /* Longbow */
+	if (!(synth & 0x40))
 		dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz;
-		break;
-	default:
-		printk(KERN_ERR "%s: unsupported RF-Chip\n",
-			wiphy_name(dev->wiphy));
-		err = -EINVAL;
-		goto err;
-	}
+	if (!(synth & 0x80))
+		dev->wiphy->bands[IEEE80211_BAND_5GHZ] = &band_5GHz;
 
 	if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
 		u8 perm_addr[ETH_ALEN];
diff --git a/drivers/net/xtsonic.c b/drivers/net/xtsonic.c
new file mode 100644
index 0000000..da42aa0
--- /dev/null
+++ b/drivers/net/xtsonic.c
@@ -0,0 +1,319 @@
+/*
+ * xtsonic.c
+ *
+ * (C) 2001 - 2007 Tensilica Inc.
+ *	Kevin Chea <kchea@yahoo.com>
+ *	Marc Gauthier <marc@linux-xtensa.org>
+ *	Chris Zankel <chris@zankel.net>
+ *
+ * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ *
+ * This driver is based on work from Andreas Busse, but most of
+ * the code is rewritten.
+ *
+ * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de)
+ *
+ * A driver for the onboard Sonic ethernet controller on the XT2000.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/dma.h>
+
+static char xtsonic_string[] = "xtsonic";
+
+extern unsigned xtboard_nvram_valid(void);
+extern void xtboard_get_ether_addr(unsigned char *buf);
+
+#include "sonic.h"
+
+/*
+ * According to the documentation for the Sonic ethernet controller,
+ * EOBC should be 760 words (1520 bytes) for 32-bit applications, and,
+ * as such, 2 words less than the buffer size. The value for RBSIZE
+ * defined in sonic.h, however is only 1520.
+ *
+ * (Note that in 16-bit configurations, EOBC is 759 words (1518 bytes) and
+ * RBSIZE 1520 bytes)
+ */
+#undef SONIC_RBSIZE
+#define SONIC_RBSIZE	1524
+
+/*
+ * The chip provides 256 byte register space.
+ */
+#define SONIC_MEM_SIZE	0x100
+
+/*
+ * Macros to access SONIC registers
+ */
+#define SONIC_READ(reg) \
+	(0xffff & *((volatile unsigned int *)dev->base_addr+reg))
+
+#define SONIC_WRITE(reg,val) \
+	*((volatile unsigned int *)dev->base_addr+reg) = val
+
+
+/* Use 0 for production, 1 for verification, and >2 for debug */
+#ifdef SONIC_DEBUG
+static unsigned int sonic_debug = SONIC_DEBUG;
+#else
+static unsigned int sonic_debug = 1;
+#endif
+
+/*
+ * We cannot use station (ethernet) address prefixes to detect the
+ * sonic controller since these are board manufacturer depended.
+ * So we check for known Silicon Revision IDs instead.
+ */
+static unsigned short known_revisions[] =
+{
+	0x101,			/* SONIC 83934 */
+	0xffff			/* end of list */
+};
+
+static int xtsonic_open(struct net_device *dev)
+{
+	if (request_irq(dev->irq,&sonic_interrupt,IRQF_DISABLED,"sonic",dev)) {
+		printk(KERN_ERR "%s: unable to get IRQ %d.\n",
+		       dev->name, dev->irq);
+		return -EAGAIN;
+	}
+	return sonic_open(dev);
+}
+
+static int xtsonic_close(struct net_device *dev)
+{
+	int err;
+	err = sonic_close(dev);
+	free_irq(dev->irq, dev);
+	return err;
+}
+
+static int __init sonic_probe1(struct net_device *dev)
+{
+	static unsigned version_printed = 0;
+	unsigned int silicon_revision;
+	struct sonic_local *lp = netdev_priv(dev);
+	unsigned int base_addr = dev->base_addr;
+	int i;
+	int err = 0;
+
+	if (!request_mem_region(base_addr, 0x100, xtsonic_string))
+		return -EBUSY;
+
+	/*
+	 * get the Silicon Revision ID. If this is one of the known
+	 * one assume that we found a SONIC ethernet controller at
+	 * the expected location.
+	 */
+	silicon_revision = SONIC_READ(SONIC_SR);
+	if (sonic_debug > 1)
+		printk("SONIC Silicon Revision = 0x%04x\n",silicon_revision);
+
+	i = 0;
+	while ((known_revisions[i] != 0xffff) &&
+			(known_revisions[i] != silicon_revision))
+		i++;
+
+	if (known_revisions[i] == 0xffff) {
+		printk("SONIC ethernet controller not found (0x%4x)\n",
+				silicon_revision);
+		return -ENODEV;
+	}
+
+	if (sonic_debug  &&  version_printed++ == 0)
+		printk(version);
+
+	/*
+	 * Put the sonic into software reset, then retrieve ethernet address.
+	 * Note: we are assuming that the boot-loader has initialized the cam.
+	 */
+	SONIC_WRITE(SONIC_CMD,SONIC_CR_RST);
+	SONIC_WRITE(SONIC_DCR,
+		    SONIC_DCR_WC0|SONIC_DCR_DW|SONIC_DCR_LBR|SONIC_DCR_SBUS);
+	SONIC_WRITE(SONIC_CEP,0);
+	SONIC_WRITE(SONIC_IMR,0);
+
+	SONIC_WRITE(SONIC_CMD,SONIC_CR_RST);
+	SONIC_WRITE(SONIC_CEP,0);
+
+	for (i=0; i<3; i++) {
+		unsigned int val = SONIC_READ(SONIC_CAP0-i);
+		dev->dev_addr[i*2] = val;
+		dev->dev_addr[i*2+1] = val >> 8;
+	}
+
+	/* Initialize the device structure. */
+
+	lp->dma_bitmode = SONIC_BITMODE32;
+
+	/*
+	 *  Allocate local private descriptor areas in uncached space.
+	 *  The entire structure must be located within the same 64kb segment.
+	 *  A simple way to ensure this is to allocate twice the
+	 *  size of the structure -- given that the structure is
+	 *  much less than 64 kB, at least one of the halves of
+	 *  the allocated area will be contained entirely in 64 kB.
+	 *  We also allocate extra space for a pointer to allow freeing
+	 *  this structure later on (in xtsonic_cleanup_module()).
+	 */
+	lp->descriptors =
+		dma_alloc_coherent(lp->device,
+			SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+			&lp->descriptors_laddr, GFP_KERNEL);
+
+	if (lp->descriptors == NULL) {
+		printk(KERN_ERR "%s: couldn't alloc DMA memory for "
+				" descriptors.\n", lp->device->bus_id);
+		goto out;
+	}
+
+	lp->cda = lp->descriptors;
+	lp->tda = lp->cda + (SIZEOF_SONIC_CDA
+			     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+			     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+			     * SONIC_BUS_SCALE(lp->dma_bitmode));
+
+	/* get the virtual dma address */
+
+	lp->cda_laddr = lp->descriptors_laddr;
+	lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA
+				         * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+					 * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+					 * SONIC_BUS_SCALE(lp->dma_bitmode));
+
+	dev->open = xtsonic_open;
+	dev->stop = xtsonic_close;
+	dev->hard_start_xmit	= sonic_send_packet;
+	dev->get_stats		= sonic_get_stats;
+	dev->set_multicast_list	= &sonic_multicast_list;
+	dev->tx_timeout		= sonic_tx_timeout;
+	dev->watchdog_timeo	= TX_TIMEOUT;
+
+	/*
+	 * clear tally counter
+	 */
+	SONIC_WRITE(SONIC_CRCT,0xffff);
+	SONIC_WRITE(SONIC_FAET,0xffff);
+	SONIC_WRITE(SONIC_MPT,0xffff);
+
+	return 0;
+out:
+	release_region(dev->base_addr, SONIC_MEM_SIZE);
+	return err;
+}
+
+
+/*
+ * Probe for a SONIC ethernet controller on an XT2000 board.
+ * Actually probing is superfluous but we're paranoid.
+ */
+
+int __init xtsonic_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct sonic_local *lp;
+	struct resource *resmem, *resirq;
+	int err = 0;
+
+	DECLARE_MAC_BUF(mac);
+
+	if ((resmem = platform_get_resource(pdev, IORESOURCE_MEM, 0)) == NULL)
+		return -ENODEV;
+
+	if ((resirq = platform_get_resource(pdev, IORESOURCE_IRQ, 0)) == NULL)
+		return -ENODEV;
+
+	if ((dev = alloc_etherdev(sizeof(struct sonic_local))) == NULL)
+		return -ENOMEM;
+
+	lp = netdev_priv(dev);
+	lp->device = &pdev->dev;
+	SET_NETDEV_DEV(dev, &pdev->dev);
+	netdev_boot_setup_check(dev);
+
+	dev->base_addr = resmem->start;
+	dev->irq = resirq->start;
+
+	if ((err = sonic_probe1(dev)))
+		goto out;
+	if ((err = register_netdev(dev)))
+		goto out1;
+
+	printk("%s: SONIC ethernet @%08lx, MAC %s, IRQ %d\n", dev->name,
+	       dev->base_addr, print_mac(mac, dev->dev_addr), dev->irq);
+
+	return 0;
+
+out1:
+	release_region(dev->base_addr, SONIC_MEM_SIZE);
+out:
+	free_netdev(dev);
+
+	return err;
+}
+
+MODULE_DESCRIPTION("Xtensa XT2000 SONIC ethernet driver");
+module_param(sonic_debug, int, 0);
+MODULE_PARM_DESC(sonic_debug, "xtsonic debug level (1-4)");
+
+#include "sonic.c"
+
+static int __devexit xtsonic_device_remove (struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct sonic_local *lp = netdev_priv(dev);
+
+	unregister_netdev(dev);
+	dma_free_coherent(lp->device,
+			  SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+			  lp->descriptors, lp->descriptors_laddr);
+	release_region (dev->base_addr, SONIC_MEM_SIZE);
+	free_netdev(dev);
+
+	return 0;
+}
+
+static struct platform_driver xtsonic_driver = {
+	.probe = xtsonic_probe,
+	.remove = __devexit_p(xtsonic_device_remove),
+	.driver = {
+		.name = xtsonic_string,
+	},
+};
+
+static int __init xtsonic_init(void)
+{
+	return platform_driver_register(&xtsonic_driver);
+}
+
+static void __exit xtsonic_cleanup(void)
+{
+	platform_driver_unregister(&xtsonic_driver);
+}
+
+module_init(xtsonic_init);
+module_exit(xtsonic_cleanup);
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index 6a98dc8..24bbef7 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -41,7 +41,7 @@
 
 		info.addr = *addr;
 
-		request_module(info.type);
+		request_module("%s", info.type);
 
 		result = i2c_new_device(adap, &info);
 		if (result == NULL) {
diff --git a/drivers/of/of_spi.c b/drivers/of/of_spi.c
index b01eec0..bed0ed6 100644
--- a/drivers/of/of_spi.c
+++ b/drivers/of/of_spi.c
@@ -61,6 +61,8 @@
 			spi->mode |= SPI_CPHA;
 		if (of_find_property(nc, "spi-cpol", NULL))
 			spi->mode |= SPI_CPOL;
+		if (of_find_property(nc, "spi-cs-high", NULL))
+			spi->mode |= SPI_CS_HIGH;
 
 		/* Device speed */
 		prop = of_get_property(nc, "spi-max-frequency", &len);
diff --git a/drivers/oprofile/buffer_sync.c b/drivers/oprofile/buffer_sync.c
index ed98227..b55cd23 100644
--- a/drivers/oprofile/buffer_sync.c
+++ b/drivers/oprofile/buffer_sync.c
@@ -41,7 +41,6 @@
 static DEFINE_SPINLOCK(task_mortuary);
 static void process_task_mortuary(void);
 
-
 /* Take ownership of the task struct and place it on the
  * list for processing. Only after two full buffer syncs
  * does the task eventually get freed, because by then
@@ -341,7 +340,7 @@
  * Add IBS fetch and op entries to event buffer
  */
 static void add_ibs_begin(struct oprofile_cpu_buffer *cpu_buf, int code,
-	int in_kernel, struct mm_struct *mm)
+			  struct mm_struct *mm)
 {
 	unsigned long rip;
 	int i, count;
@@ -565,9 +564,11 @@
 	struct task_struct *new;
 	unsigned long cookie = 0;
 	int in_kernel = 1;
-	unsigned int i;
 	sync_buffer_state state = sb_buffer_start;
+#ifndef CONFIG_OPROFILE_IBS
+	unsigned int i;
 	unsigned long available;
+#endif
 
 	mutex_lock(&buffer_mutex);
 
@@ -575,9 +576,13 @@
 
 	/* Remember, only we can modify tail_pos */
 
+#ifndef CONFIG_OPROFILE_IBS
 	available = get_slots(cpu_buf);
 
 	for (i = 0; i < available; ++i) {
+#else
+	while (get_slots(cpu_buf)) {
+#endif
 		struct op_sample *s = &cpu_buf->buffer[cpu_buf->tail_pos];
 
 		if (is_code(s->eip)) {
@@ -593,12 +598,10 @@
 #ifdef CONFIG_OPROFILE_IBS
 			} else if (s->event == IBS_FETCH_BEGIN) {
 				state = sb_bt_start;
-				add_ibs_begin(cpu_buf,
-					IBS_FETCH_CODE, in_kernel, mm);
+				add_ibs_begin(cpu_buf, IBS_FETCH_CODE, mm);
 			} else if (s->event == IBS_OP_BEGIN) {
 				state = sb_bt_start;
-				add_ibs_begin(cpu_buf,
-					IBS_OP_CODE, in_kernel, mm);
+				add_ibs_begin(cpu_buf, IBS_OP_CODE, mm);
 #endif
 			} else {
 				struct mm_struct *oldmm = mm;
@@ -628,3 +631,27 @@
 
 	mutex_unlock(&buffer_mutex);
 }
+
+/* The function can be used to add a buffer worth of data directly to
+ * the kernel buffer. The buffer is assumed to be a circular buffer.
+ * Take the entries from index start and end at index end, wrapping
+ * at max_entries.
+ */
+void oprofile_put_buff(unsigned long *buf, unsigned int start,
+		       unsigned int stop, unsigned int max)
+{
+	int i;
+
+	i = start;
+
+	mutex_lock(&buffer_mutex);
+	while (i != stop) {
+		add_event_entry(buf[i++]);
+
+		if (i >= max)
+			i = 0;
+	}
+
+	mutex_unlock(&buffer_mutex);
+}
+
diff --git a/drivers/oprofile/buffer_sync.h b/drivers/oprofile/buffer_sync.h
index 08866f6..3110732 100644
--- a/drivers/oprofile/buffer_sync.h
+++ b/drivers/oprofile/buffer_sync.h
@@ -9,13 +9,13 @@
 
 #ifndef OPROFILE_BUFFER_SYNC_H
 #define OPROFILE_BUFFER_SYNC_H
- 
+
 /* add the necessary profiling hooks */
 int sync_start(void);
 
 /* remove the hooks */
 void sync_stop(void);
- 
+
 /* sync the given CPU's buffer */
 void sync_buffer(int cpu);
 
diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c
index e1bd5a9..01d38e7 100644
--- a/drivers/oprofile/cpu_buffer.c
+++ b/drivers/oprofile/cpu_buffer.c
@@ -22,7 +22,7 @@
 #include <linux/oprofile.h>
 #include <linux/vmalloc.h>
 #include <linux/errno.h>
- 
+
 #include "event_buffer.h"
 #include "cpu_buffer.h"
 #include "buffer_sync.h"
@@ -38,27 +38,40 @@
 void free_cpu_buffers(void)
 {
 	int i;
- 
-	for_each_online_cpu(i) {
+
+	for_each_possible_cpu(i) {
 		vfree(per_cpu(cpu_buffer, i).buffer);
 		per_cpu(cpu_buffer, i).buffer = NULL;
 	}
 }
 
+unsigned long oprofile_get_cpu_buffer_size(void)
+{
+	return fs_cpu_buffer_size;
+}
+
+void oprofile_cpu_buffer_inc_smpl_lost(void)
+{
+	struct oprofile_cpu_buffer *cpu_buf
+		= &__get_cpu_var(cpu_buffer);
+
+	cpu_buf->sample_lost_overflow++;
+}
+
 int alloc_cpu_buffers(void)
 {
 	int i;
- 
+
 	unsigned long buffer_size = fs_cpu_buffer_size;
- 
-	for_each_online_cpu(i) {
+
+	for_each_possible_cpu(i) {
 		struct oprofile_cpu_buffer *b = &per_cpu(cpu_buffer, i);
- 
+
 		b->buffer = vmalloc_node(sizeof(struct op_sample) * buffer_size,
 			cpu_to_node(i));
 		if (!b->buffer)
 			goto fail;
- 
+
 		b->last_task = NULL;
 		b->last_is_kernel = -1;
 		b->tracing = 0;
@@ -112,7 +125,7 @@
 }
 
 /* Resets the cpu buffer to a sane state. */
-void cpu_buffer_reset(struct oprofile_cpu_buffer * cpu_buf)
+void cpu_buffer_reset(struct oprofile_cpu_buffer *cpu_buf)
 {
 	/* reset these to invalid values; the next sample
 	 * collected will populate the buffer with proper
@@ -123,7 +136,7 @@
 }
 
 /* compute number of available slots in cpu_buffer queue */
-static unsigned long nr_available_slots(struct oprofile_cpu_buffer const * b)
+static unsigned long nr_available_slots(struct oprofile_cpu_buffer const *b)
 {
 	unsigned long head = b->head_pos;
 	unsigned long tail = b->tail_pos;
@@ -134,7 +147,7 @@
 	return tail + (b->buffer_size - head) - 1;
 }
 
-static void increment_head(struct oprofile_cpu_buffer * b)
+static void increment_head(struct oprofile_cpu_buffer *b)
 {
 	unsigned long new_head = b->head_pos + 1;
 
@@ -149,17 +162,17 @@
 }
 
 static inline void
-add_sample(struct oprofile_cpu_buffer * cpu_buf,
-           unsigned long pc, unsigned long event)
+add_sample(struct oprofile_cpu_buffer *cpu_buf,
+	   unsigned long pc, unsigned long event)
 {
-	struct op_sample * entry = &cpu_buf->buffer[cpu_buf->head_pos];
+	struct op_sample *entry = &cpu_buf->buffer[cpu_buf->head_pos];
 	entry->eip = pc;
 	entry->event = event;
 	increment_head(cpu_buf);
 }
 
 static inline void
-add_code(struct oprofile_cpu_buffer * buffer, unsigned long value)
+add_code(struct oprofile_cpu_buffer *buffer, unsigned long value)
 {
 	add_sample(buffer, ESCAPE_CODE, value);
 }
@@ -173,10 +186,10 @@
  * pc. We tag this in the buffer by generating kernel enter/exit
  * events whenever is_kernel changes
  */
-static int log_sample(struct oprofile_cpu_buffer * cpu_buf, unsigned long pc,
+static int log_sample(struct oprofile_cpu_buffer *cpu_buf, unsigned long pc,
 		      int is_kernel, unsigned long event)
 {
-	struct task_struct * task;
+	struct task_struct *task;
 
 	cpu_buf->sample_received++;
 
@@ -205,7 +218,7 @@
 		cpu_buf->last_task = task;
 		add_code(cpu_buf, (unsigned long)task);
 	}
- 
+
 	add_sample(cpu_buf, pc, event);
 	return 1;
 }
@@ -222,7 +235,7 @@
 	return 1;
 }
 
-static void oprofile_end_trace(struct oprofile_cpu_buffer * cpu_buf)
+static void oprofile_end_trace(struct oprofile_cpu_buffer *cpu_buf)
 {
 	cpu_buf->tracing = 0;
 }
@@ -257,21 +270,23 @@
 
 #ifdef CONFIG_OPROFILE_IBS
 
-#define MAX_IBS_SAMPLE_SIZE	14
-static int log_ibs_sample(struct oprofile_cpu_buffer *cpu_buf,
-	unsigned long pc, int is_kernel, unsigned  int *ibs, int ibs_code)
+#define MAX_IBS_SAMPLE_SIZE 14
+
+void oprofile_add_ibs_sample(struct pt_regs *const regs,
+			     unsigned int *const ibs_sample, int ibs_code)
 {
+	int is_kernel = !user_mode(regs);
+	struct oprofile_cpu_buffer *cpu_buf = &__get_cpu_var(cpu_buffer);
 	struct task_struct *task;
 
 	cpu_buf->sample_received++;
 
 	if (nr_available_slots(cpu_buf) < MAX_IBS_SAMPLE_SIZE) {
+		/* we can't backtrace since we lost the source of this event */
 		cpu_buf->sample_lost_overflow++;
-		return 0;
+		return;
 	}
 
-	is_kernel = !!is_kernel;
-
 	/* notice a switch from user->kernel or vice versa */
 	if (cpu_buf->last_is_kernel != is_kernel) {
 		cpu_buf->last_is_kernel = is_kernel;
@@ -281,7 +296,6 @@
 	/* notice a task switch */
 	if (!is_kernel) {
 		task = current;
-
 		if (cpu_buf->last_task != task) {
 			cpu_buf->last_task = task;
 			add_code(cpu_buf, (unsigned long)task);
@@ -289,36 +303,17 @@
 	}
 
 	add_code(cpu_buf, ibs_code);
-	add_sample(cpu_buf, ibs[0], ibs[1]);
-	add_sample(cpu_buf, ibs[2], ibs[3]);
-	add_sample(cpu_buf, ibs[4], ibs[5]);
+	add_sample(cpu_buf, ibs_sample[0], ibs_sample[1]);
+	add_sample(cpu_buf, ibs_sample[2], ibs_sample[3]);
+	add_sample(cpu_buf, ibs_sample[4], ibs_sample[5]);
 
 	if (ibs_code == IBS_OP_BEGIN) {
-	add_sample(cpu_buf, ibs[6], ibs[7]);
-	add_sample(cpu_buf, ibs[8], ibs[9]);
-	add_sample(cpu_buf, ibs[10], ibs[11]);
+		add_sample(cpu_buf, ibs_sample[6], ibs_sample[7]);
+		add_sample(cpu_buf, ibs_sample[8], ibs_sample[9]);
+		add_sample(cpu_buf, ibs_sample[10], ibs_sample[11]);
 	}
 
-	return 1;
-}
-
-void oprofile_add_ibs_sample(struct pt_regs *const regs,
-				unsigned int * const ibs_sample, u8 code)
-{
-	int is_kernel = !user_mode(regs);
-	unsigned long pc = profile_pc(regs);
-
-	struct oprofile_cpu_buffer *cpu_buf =
-			 &per_cpu(cpu_buffer, smp_processor_id());
-
-	if (!backtrace_depth) {
-		log_ibs_sample(cpu_buf, pc, is_kernel, ibs_sample, code);
-		return;
-	}
-
-	/* if log_sample() fails we can't backtrace since we lost the source
-	* of this event */
-	if (log_ibs_sample(cpu_buf, pc, is_kernel, ibs_sample, code))
+	if (backtrace_depth)
 		oprofile_ops.backtrace(regs, backtrace_depth);
 }
 
@@ -363,11 +358,16 @@
  */
 static void wq_sync_buffer(struct work_struct *work)
 {
-	struct oprofile_cpu_buffer * b =
+	struct oprofile_cpu_buffer *b =
 		container_of(work, struct oprofile_cpu_buffer, work.work);
 	if (b->cpu != smp_processor_id()) {
 		printk(KERN_DEBUG "WQ on CPU%d, prefer CPU%d\n",
 		       smp_processor_id(), b->cpu);
+
+		if (!cpu_online(b->cpu)) {
+			cancel_delayed_work(&b->work);
+			return;
+		}
 	}
 	sync_buffer(b->cpu);
 
diff --git a/drivers/oprofile/cpu_buffer.h b/drivers/oprofile/cpu_buffer.h
index 9c44d00..d3cc2626 100644
--- a/drivers/oprofile/cpu_buffer.h
+++ b/drivers/oprofile/cpu_buffer.h
@@ -15,9 +15,9 @@
 #include <linux/workqueue.h>
 #include <linux/cache.h>
 #include <linux/sched.h>
- 
+
 struct task_struct;
- 
+
 int alloc_cpu_buffers(void);
 void free_cpu_buffers(void);
 
@@ -31,15 +31,15 @@
 	unsigned long eip;
 	unsigned long event;
 };
- 
+
 struct oprofile_cpu_buffer {
 	volatile unsigned long head_pos;
 	volatile unsigned long tail_pos;
 	unsigned long buffer_size;
-	struct task_struct * last_task;
+	struct task_struct *last_task;
 	int last_is_kernel;
 	int tracing;
-	struct op_sample * buffer;
+	struct op_sample *buffer;
 	unsigned long sample_received;
 	unsigned long sample_lost_overflow;
 	unsigned long backtrace_aborted;
@@ -50,7 +50,7 @@
 
 DECLARE_PER_CPU(struct oprofile_cpu_buffer, cpu_buffer);
 
-void cpu_buffer_reset(struct oprofile_cpu_buffer * cpu_buf);
+void cpu_buffer_reset(struct oprofile_cpu_buffer *cpu_buf);
 
 /* transient events for the CPU buffer -> event buffer */
 #define CPU_IS_KERNEL 1
diff --git a/drivers/oprofile/event_buffer.c b/drivers/oprofile/event_buffer.c
index 8d692a5..d962ba0 100644
--- a/drivers/oprofile/event_buffer.c
+++ b/drivers/oprofile/event_buffer.c
@@ -19,16 +19,16 @@
 #include <linux/dcookies.h>
 #include <linux/fs.h>
 #include <asm/uaccess.h>
- 
+
 #include "oprof.h"
 #include "event_buffer.h"
 #include "oprofile_stats.h"
 
 DEFINE_MUTEX(buffer_mutex);
- 
+
 static unsigned long buffer_opened;
 static DECLARE_WAIT_QUEUE_HEAD(buffer_wait);
-static unsigned long * event_buffer;
+static unsigned long *event_buffer;
 static unsigned long buffer_size;
 static unsigned long buffer_watershed;
 static size_t buffer_pos;
@@ -66,7 +66,7 @@
 	mutex_unlock(&buffer_mutex);
 }
 
- 
+
 int alloc_event_buffer(void)
 {
 	int err = -ENOMEM;
@@ -76,13 +76,13 @@
 	buffer_size = fs_buffer_size;
 	buffer_watershed = fs_buffer_watershed;
 	spin_unlock_irqrestore(&oprofilefs_lock, flags);
- 
+
 	if (buffer_watershed >= buffer_size)
 		return -EINVAL;
- 
+
 	event_buffer = vmalloc(sizeof(unsigned long) * buffer_size);
 	if (!event_buffer)
-		goto out; 
+		goto out;
 
 	err = 0;
 out:
@@ -97,8 +97,8 @@
 	event_buffer = NULL;
 }
 
- 
-static int event_buffer_open(struct inode * inode, struct file * file)
+
+static int event_buffer_open(struct inode *inode, struct file *file)
 {
 	int err = -EPERM;
 
@@ -116,14 +116,14 @@
 	file->private_data = dcookie_register();
 	if (!file->private_data)
 		goto out;
-		 
+
 	if ((err = oprofile_setup()))
 		goto fail;
 
 	/* NB: the actual start happens from userspace
 	 * echo 1 >/dev/oprofile/enable
 	 */
- 
+
 	return 0;
 
 fail:
@@ -134,7 +134,7 @@
 }
 
 
-static int event_buffer_release(struct inode * inode, struct file * file)
+static int event_buffer_release(struct inode *inode, struct file *file)
 {
 	oprofile_stop();
 	oprofile_shutdown();
@@ -146,8 +146,8 @@
 }
 
 
-static ssize_t event_buffer_read(struct file * file, char __user * buf,
-				 size_t count, loff_t * offset)
+static ssize_t event_buffer_read(struct file *file, char __user *buf,
+				 size_t count, loff_t *offset)
 {
 	int retval = -EINVAL;
 	size_t const max = buffer_size * sizeof(unsigned long);
@@ -172,18 +172,18 @@
 	retval = -EFAULT;
 
 	count = buffer_pos * sizeof(unsigned long);
- 
+
 	if (copy_to_user(buf, event_buffer, count))
 		goto out;
 
 	retval = count;
 	buffer_pos = 0;
- 
+
 out:
 	mutex_unlock(&buffer_mutex);
 	return retval;
 }
- 
+
 const struct file_operations event_buffer_fops = {
 	.open		= event_buffer_open,
 	.release	= event_buffer_release,
diff --git a/drivers/oprofile/event_buffer.h b/drivers/oprofile/event_buffer.h
index 5076ed1..4e70749 100644
--- a/drivers/oprofile/event_buffer.h
+++ b/drivers/oprofile/event_buffer.h
@@ -10,13 +10,20 @@
 #ifndef EVENT_BUFFER_H
 #define EVENT_BUFFER_H
 
-#include <linux/types.h> 
+#include <linux/types.h>
 #include <asm/mutex.h>
- 
+
 int alloc_event_buffer(void);
 
 void free_event_buffer(void);
- 
+
+/**
+ * Add data to the event buffer.
+ * The data passed is free-form, but typically consists of
+ * file offsets, dcookies, context information, and ESCAPE codes.
+ */
+void add_event_entry(unsigned long data);
+
 /* wake up the process sleeping on the event file */
 void wake_up_buffer_waiter(void);
 
@@ -24,10 +31,10 @@
 #define NO_COOKIE 0UL
 
 extern const struct file_operations event_buffer_fops;
- 
+
 /* mutex between sync_cpu_buffers() and the
  * file reading code.
  */
 extern struct mutex buffer_mutex;
- 
+
 #endif /* EVENT_BUFFER_H */
diff --git a/drivers/oprofile/oprof.c b/drivers/oprofile/oprof.c
index 2c64517..cd37590 100644
--- a/drivers/oprofile/oprof.c
+++ b/drivers/oprofile/oprof.c
@@ -19,7 +19,7 @@
 #include "cpu_buffer.h"
 #include "buffer_sync.h"
 #include "oprofile_stats.h"
- 
+
 struct oprofile_operations oprofile_ops;
 
 unsigned long oprofile_started;
@@ -36,7 +36,7 @@
 int oprofile_setup(void)
 {
 	int err;
- 
+
 	mutex_lock(&start_mutex);
 
 	if ((err = alloc_cpu_buffers()))
@@ -44,10 +44,10 @@
 
 	if ((err = alloc_event_buffer()))
 		goto out1;
- 
+
 	if (oprofile_ops.setup && (err = oprofile_ops.setup()))
 		goto out2;
- 
+
 	/* Note even though this starts part of the
 	 * profiling overhead, it's necessary to prevent
 	 * us missing task deaths and eventually oopsing
@@ -74,7 +74,7 @@
 	is_setup = 1;
 	mutex_unlock(&start_mutex);
 	return 0;
- 
+
 out3:
 	if (oprofile_ops.shutdown)
 		oprofile_ops.shutdown();
@@ -92,17 +92,17 @@
 int oprofile_start(void)
 {
 	int err = -EINVAL;
- 
+
 	mutex_lock(&start_mutex);
- 
+
 	if (!is_setup)
 		goto out;
 
-	err = 0; 
- 
+	err = 0;
+
 	if (oprofile_started)
 		goto out;
- 
+
 	oprofile_reset_stats();
 
 	if ((err = oprofile_ops.start()))
@@ -114,7 +114,7 @@
 	return err;
 }
 
- 
+
 /* echo 0>/dev/oprofile/enable */
 void oprofile_stop(void)
 {
@@ -204,13 +204,13 @@
 	oprofile_arch_exit();
 }
 
- 
+
 module_init(oprofile_init);
 module_exit(oprofile_exit);
 
 module_param_named(timer, timer, int, 0644);
 MODULE_PARM_DESC(timer, "force use of timer interrupt");
- 
+
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("John Levon <levon@movementarian.org>");
 MODULE_DESCRIPTION("OProfile system profiler");
diff --git a/drivers/oprofile/oprof.h b/drivers/oprofile/oprof.h
index 1832365..5df0c21 100644
--- a/drivers/oprofile/oprof.h
+++ b/drivers/oprofile/oprof.h
@@ -11,7 +11,7 @@
 #define OPROF_H
 
 int oprofile_setup(void);
-void oprofile_shutdown(void); 
+void oprofile_shutdown(void);
 
 int oprofilefs_register(void);
 void oprofilefs_unregister(void);
@@ -20,20 +20,20 @@
 void oprofile_stop(void);
 
 struct oprofile_operations;
- 
+
 extern unsigned long fs_buffer_size;
 extern unsigned long fs_cpu_buffer_size;
 extern unsigned long fs_buffer_watershed;
 extern struct oprofile_operations oprofile_ops;
 extern unsigned long oprofile_started;
 extern unsigned long backtrace_depth;
- 
+
 struct super_block;
 struct dentry;
 
-void oprofile_create_files(struct super_block * sb, struct dentry * root);
-void oprofile_timer_init(struct oprofile_operations * ops);
+void oprofile_create_files(struct super_block *sb, struct dentry *root);
+void oprofile_timer_init(struct oprofile_operations *ops);
 
 int oprofile_set_backtrace(unsigned long depth);
- 
+
 #endif /* OPROF_H */
diff --git a/drivers/oprofile/oprofile_files.c b/drivers/oprofile/oprofile_files.c
index ef953ba..cc106d5 100644
--- a/drivers/oprofile/oprofile_files.c
+++ b/drivers/oprofile/oprofile_files.c
@@ -13,18 +13,18 @@
 #include "event_buffer.h"
 #include "oprofile_stats.h"
 #include "oprof.h"
- 
+
 unsigned long fs_buffer_size = 131072;
 unsigned long fs_cpu_buffer_size = 8192;
 unsigned long fs_buffer_watershed = 32768; /* FIXME: tune */
 
-static ssize_t depth_read(struct file * file, char __user * buf, size_t count, loff_t * offset)
+static ssize_t depth_read(struct file *file, char __user *buf, size_t count, loff_t *offset)
 {
 	return oprofilefs_ulong_to_user(backtrace_depth, buf, count, offset);
 }
 
 
-static ssize_t depth_write(struct file * file, char const __user * buf, size_t count, loff_t * offset)
+static ssize_t depth_write(struct file *file, char const __user *buf, size_t count, loff_t *offset)
 {
 	unsigned long val;
 	int retval;
@@ -49,8 +49,8 @@
 	.write		= depth_write
 };
 
- 
-static ssize_t pointer_size_read(struct file * file, char __user * buf, size_t count, loff_t * offset)
+
+static ssize_t pointer_size_read(struct file *file, char __user *buf, size_t count, loff_t *offset)
 {
 	return oprofilefs_ulong_to_user(sizeof(void *), buf, count, offset);
 }
@@ -61,24 +61,24 @@
 };
 
 
-static ssize_t cpu_type_read(struct file * file, char __user * buf, size_t count, loff_t * offset)
+static ssize_t cpu_type_read(struct file *file, char __user *buf, size_t count, loff_t *offset)
 {
 	return oprofilefs_str_to_user(oprofile_ops.cpu_type, buf, count, offset);
 }
- 
- 
+
+
 static const struct file_operations cpu_type_fops = {
 	.read		= cpu_type_read,
 };
- 
- 
-static ssize_t enable_read(struct file * file, char __user * buf, size_t count, loff_t * offset)
+
+
+static ssize_t enable_read(struct file *file, char __user *buf, size_t count, loff_t *offset)
 {
 	return oprofilefs_ulong_to_user(oprofile_started, buf, count, offset);
 }
 
 
-static ssize_t enable_write(struct file * file, char const __user * buf, size_t count, loff_t * offset)
+static ssize_t enable_write(struct file *file, char const __user *buf, size_t count, loff_t *offset)
 {
 	unsigned long val;
 	int retval;
@@ -89,7 +89,7 @@
 	retval = oprofilefs_ulong_from_user(&val, buf, count);
 	if (retval)
 		return retval;
- 
+
 	if (val)
 		retval = oprofile_start();
 	else
@@ -100,14 +100,14 @@
 	return count;
 }
 
- 
+
 static const struct file_operations enable_fops = {
 	.read		= enable_read,
 	.write		= enable_write,
 };
 
 
-static ssize_t dump_write(struct file * file, char const __user * buf, size_t count, loff_t * offset)
+static ssize_t dump_write(struct file *file, char const __user *buf, size_t count, loff_t *offset)
 {
 	wake_up_buffer_waiter();
 	return count;
@@ -117,8 +117,8 @@
 static const struct file_operations dump_fops = {
 	.write		= dump_write,
 };
- 
-void oprofile_create_files(struct super_block * sb, struct dentry * root)
+
+void oprofile_create_files(struct super_block *sb, struct dentry *root)
 {
 	oprofilefs_create_file(sb, root, "enable", &enable_fops);
 	oprofilefs_create_file_perm(sb, root, "dump", &dump_fops, 0666);
@@ -126,7 +126,7 @@
 	oprofilefs_create_ulong(sb, root, "buffer_size", &fs_buffer_size);
 	oprofilefs_create_ulong(sb, root, "buffer_watershed", &fs_buffer_watershed);
 	oprofilefs_create_ulong(sb, root, "cpu_buffer_size", &fs_cpu_buffer_size);
-	oprofilefs_create_file(sb, root, "cpu_type", &cpu_type_fops); 
+	oprofilefs_create_file(sb, root, "cpu_type", &cpu_type_fops);
 	oprofilefs_create_file(sb, root, "backtrace_depth", &depth_fops);
 	oprofilefs_create_file(sb, root, "pointer_size", &pointer_size_fops);
 	oprofile_create_stats_files(sb, root);
diff --git a/drivers/oprofile/oprofile_stats.c b/drivers/oprofile/oprofile_stats.c
index f99b28e..e1f6ce0 100644
--- a/drivers/oprofile/oprofile_stats.c
+++ b/drivers/oprofile/oprofile_stats.c
@@ -11,17 +11,17 @@
 #include <linux/smp.h>
 #include <linux/cpumask.h>
 #include <linux/threads.h>
- 
+
 #include "oprofile_stats.h"
 #include "cpu_buffer.h"
- 
+
 struct oprofile_stat_struct oprofile_stats;
- 
+
 void oprofile_reset_stats(void)
 {
-	struct oprofile_cpu_buffer * cpu_buf; 
+	struct oprofile_cpu_buffer *cpu_buf;
 	int i;
- 
+
 	for_each_possible_cpu(i) {
 		cpu_buf = &per_cpu(cpu_buffer, i);
 		cpu_buf->sample_received = 0;
@@ -29,18 +29,18 @@
 		cpu_buf->backtrace_aborted = 0;
 		cpu_buf->sample_invalid_eip = 0;
 	}
- 
+
 	atomic_set(&oprofile_stats.sample_lost_no_mm, 0);
 	atomic_set(&oprofile_stats.sample_lost_no_mapping, 0);
 	atomic_set(&oprofile_stats.event_lost_overflow, 0);
 }
 
 
-void oprofile_create_stats_files(struct super_block * sb, struct dentry * root)
+void oprofile_create_stats_files(struct super_block *sb, struct dentry *root)
 {
-	struct oprofile_cpu_buffer * cpu_buf;
-	struct dentry * cpudir;
-	struct dentry * dir;
+	struct oprofile_cpu_buffer *cpu_buf;
+	struct dentry *cpudir;
+	struct dentry *dir;
 	char buf[10];
 	int i;
 
@@ -52,7 +52,7 @@
 		cpu_buf = &per_cpu(cpu_buffer, i);
 		snprintf(buf, 10, "cpu%d", i);
 		cpudir = oprofilefs_mkdir(sb, dir, buf);
- 
+
 		/* Strictly speaking access to these ulongs is racy,
 		 * but we can't simply lock them, and they are
 		 * informational only.
@@ -66,7 +66,7 @@
 		oprofilefs_create_ro_ulong(sb, cpudir, "sample_invalid_eip",
 			&cpu_buf->sample_invalid_eip);
 	}
- 
+
 	oprofilefs_create_ro_atomic(sb, dir, "sample_lost_no_mm",
 		&oprofile_stats.sample_lost_no_mm);
 	oprofilefs_create_ro_atomic(sb, dir, "sample_lost_no_mapping",
diff --git a/drivers/oprofile/oprofile_stats.h b/drivers/oprofile/oprofile_stats.h
index 6d755a6..3da0d08 100644
--- a/drivers/oprofile/oprofile_stats.h
+++ b/drivers/oprofile/oprofile_stats.h
@@ -11,7 +11,7 @@
 #define OPROFILE_STATS_H
 
 #include <asm/atomic.h>
- 
+
 struct oprofile_stat_struct {
 	atomic_t sample_lost_no_mm;
 	atomic_t sample_lost_no_mapping;
@@ -20,14 +20,14 @@
 };
 
 extern struct oprofile_stat_struct oprofile_stats;
- 
+
 /* reset all stats to zero */
 void oprofile_reset_stats(void);
- 
+
 struct super_block;
 struct dentry;
- 
+
 /* create the stats/ dir */
-void oprofile_create_stats_files(struct super_block * sb, struct dentry * root);
+void oprofile_create_stats_files(struct super_block *sb, struct dentry *root);
 
 #endif /* OPROFILE_STATS_H */
diff --git a/drivers/oprofile/oprofilefs.c b/drivers/oprofile/oprofilefs.c
index 8543cb2..ddc4c59 100644
--- a/drivers/oprofile/oprofilefs.c
+++ b/drivers/oprofile/oprofilefs.c
@@ -23,9 +23,9 @@
 
 DEFINE_SPINLOCK(oprofilefs_lock);
 
-static struct inode * oprofilefs_get_inode(struct super_block * sb, int mode)
+static struct inode *oprofilefs_get_inode(struct super_block *sb, int mode)
 {
-	struct inode * inode = new_inode(sb);
+	struct inode *inode = new_inode(sb);
 
 	if (inode) {
 		inode->i_mode = mode;
@@ -44,7 +44,7 @@
 };
 
 
-ssize_t oprofilefs_str_to_user(char const * str, char __user * buf, size_t count, loff_t * offset)
+ssize_t oprofilefs_str_to_user(char const *str, char __user *buf, size_t count, loff_t *offset)
 {
 	return simple_read_from_buffer(buf, count, offset, str, strlen(str));
 }
@@ -52,7 +52,7 @@
 
 #define TMPBUFSIZE 50
 
-ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user * buf, size_t count, loff_t * offset)
+ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user *buf, size_t count, loff_t *offset)
 {
 	char tmpbuf[TMPBUFSIZE];
 	size_t maxlen = snprintf(tmpbuf, TMPBUFSIZE, "%lu\n", val);
@@ -62,7 +62,7 @@
 }
 
 
-int oprofilefs_ulong_from_user(unsigned long * val, char const __user * buf, size_t count)
+int oprofilefs_ulong_from_user(unsigned long *val, char const __user *buf, size_t count)
 {
 	char tmpbuf[TMPBUFSIZE];
 	unsigned long flags;
@@ -85,16 +85,16 @@
 }
 
 
-static ssize_t ulong_read_file(struct file * file, char __user * buf, size_t count, loff_t * offset)
+static ssize_t ulong_read_file(struct file *file, char __user *buf, size_t count, loff_t *offset)
 {
-	unsigned long * val = file->private_data;
+	unsigned long *val = file->private_data;
 	return oprofilefs_ulong_to_user(*val, buf, count, offset);
 }
 
 
-static ssize_t ulong_write_file(struct file * file, char const __user * buf, size_t count, loff_t * offset)
+static ssize_t ulong_write_file(struct file *file, char const __user *buf, size_t count, loff_t *offset)
 {
-	unsigned long * value = file->private_data;
+	unsigned long *value = file->private_data;
 	int retval;
 
 	if (*offset)
@@ -108,7 +108,7 @@
 }
 
 
-static int default_open(struct inode * inode, struct file * filp)
+static int default_open(struct inode *inode, struct file *filp)
 {
 	if (inode->i_private)
 		filp->private_data = inode->i_private;
@@ -129,12 +129,12 @@
 };
 
 
-static struct dentry * __oprofilefs_create_file(struct super_block * sb,
-	struct dentry * root, char const * name, const struct file_operations * fops,
+static struct dentry *__oprofilefs_create_file(struct super_block *sb,
+	struct dentry *root, char const *name, const struct file_operations *fops,
 	int perm)
 {
-	struct dentry * dentry;
-	struct inode * inode;
+	struct dentry *dentry;
+	struct inode *inode;
 
 	dentry = d_alloc_name(root, name);
 	if (!dentry)
@@ -150,10 +150,10 @@
 }
 
 
-int oprofilefs_create_ulong(struct super_block * sb, struct dentry * root,
-	char const * name, unsigned long * val)
+int oprofilefs_create_ulong(struct super_block *sb, struct dentry *root,
+	char const *name, unsigned long *val)
 {
-	struct dentry * d = __oprofilefs_create_file(sb, root, name,
+	struct dentry *d = __oprofilefs_create_file(sb, root, name,
 						     &ulong_fops, 0644);
 	if (!d)
 		return -EFAULT;
@@ -163,10 +163,10 @@
 }
 
 
-int oprofilefs_create_ro_ulong(struct super_block * sb, struct dentry * root,
-	char const * name, unsigned long * val)
+int oprofilefs_create_ro_ulong(struct super_block *sb, struct dentry *root,
+	char const *name, unsigned long *val)
 {
-	struct dentry * d = __oprofilefs_create_file(sb, root, name,
+	struct dentry *d = __oprofilefs_create_file(sb, root, name,
 						     &ulong_ro_fops, 0444);
 	if (!d)
 		return -EFAULT;
@@ -176,23 +176,23 @@
 }
 
 
-static ssize_t atomic_read_file(struct file * file, char __user * buf, size_t count, loff_t * offset)
+static ssize_t atomic_read_file(struct file *file, char __user *buf, size_t count, loff_t *offset)
 {
-	atomic_t * val = file->private_data;
+	atomic_t *val = file->private_data;
 	return oprofilefs_ulong_to_user(atomic_read(val), buf, count, offset);
 }
- 
+
 
 static const struct file_operations atomic_ro_fops = {
 	.read		= atomic_read_file,
 	.open		= default_open,
 };
- 
 
-int oprofilefs_create_ro_atomic(struct super_block * sb, struct dentry * root,
-	char const * name, atomic_t * val)
+
+int oprofilefs_create_ro_atomic(struct super_block *sb, struct dentry *root,
+	char const *name, atomic_t *val)
 {
-	struct dentry * d = __oprofilefs_create_file(sb, root, name,
+	struct dentry *d = __oprofilefs_create_file(sb, root, name,
 						     &atomic_ro_fops, 0444);
 	if (!d)
 		return -EFAULT;
@@ -201,9 +201,9 @@
 	return 0;
 }
 
- 
-int oprofilefs_create_file(struct super_block * sb, struct dentry * root,
-	char const * name, const struct file_operations * fops)
+
+int oprofilefs_create_file(struct super_block *sb, struct dentry *root,
+	char const *name, const struct file_operations *fops)
 {
 	if (!__oprofilefs_create_file(sb, root, name, fops, 0644))
 		return -EFAULT;
@@ -211,8 +211,8 @@
 }
 
 
-int oprofilefs_create_file_perm(struct super_block * sb, struct dentry * root,
-	char const * name, const struct file_operations * fops, int perm)
+int oprofilefs_create_file_perm(struct super_block *sb, struct dentry *root,
+	char const *name, const struct file_operations *fops, int perm)
 {
 	if (!__oprofilefs_create_file(sb, root, name, fops, perm))
 		return -EFAULT;
@@ -220,11 +220,11 @@
 }
 
 
-struct dentry * oprofilefs_mkdir(struct super_block * sb,
-	struct dentry * root, char const * name)
+struct dentry *oprofilefs_mkdir(struct super_block *sb,
+	struct dentry *root, char const *name)
 {
-	struct dentry * dentry;
-	struct inode * inode;
+	struct dentry *dentry;
+	struct inode *inode;
 
 	dentry = d_alloc_name(root, name);
 	if (!dentry)
@@ -241,10 +241,10 @@
 }
 
 
-static int oprofilefs_fill_super(struct super_block * sb, void * data, int silent)
+static int oprofilefs_fill_super(struct super_block *sb, void *data, int silent)
 {
-	struct inode * root_inode;
-	struct dentry * root_dentry;
+	struct inode *root_inode;
+	struct dentry *root_dentry;
 
 	sb->s_blocksize = PAGE_CACHE_SIZE;
 	sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
diff --git a/drivers/oprofile/timer_int.c b/drivers/oprofile/timer_int.c
index 710a45f..333f915 100644
--- a/drivers/oprofile/timer_int.c
+++ b/drivers/oprofile/timer_int.c
@@ -19,7 +19,7 @@
 
 static int timer_notify(struct pt_regs *regs)
 {
- 	oprofile_add_sample(regs, 0);
+	oprofile_add_sample(regs, 0);
 	return 0;
 }
 
@@ -35,7 +35,7 @@
 }
 
 
-void __init oprofile_timer_init(struct oprofile_operations * ops)
+void __init oprofile_timer_init(struct oprofile_operations *ops)
 {
 	ops->create_files = NULL;
 	ops->setup = NULL;
diff --git a/drivers/parisc/eisa_eeprom.c b/drivers/parisc/eisa_eeprom.c
index 5ac2079..685d94e 100644
--- a/drivers/parisc/eisa_eeprom.c
+++ b/drivers/parisc/eisa_eeprom.c
@@ -86,7 +86,7 @@
 {
 	cycle_kernel_lock();
 
-	if (file->f_mode & 2)
+	if (file->f_mode & FMODE_WRITE)
 		return -EINVAL;
    
 	return 0;
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 8a846adf..96f3bdf 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2791,6 +2791,7 @@
 	oxsemi_952,
 	oxsemi_954,
 	oxsemi_840,
+	oxsemi_pcie_pport,
 	aks_0100,
 	mobility_pp,
 	netmos_9705,
@@ -2868,6 +2869,7 @@
 	/* oxsemi_952 */		{ 1, { { 0, 1 }, } },
 	/* oxsemi_954 */		{ 1, { { 0, -1 }, } },
 	/* oxsemi_840 */		{ 1, { { 0, 1 }, } },
+	/* oxsemi_pcie_pport */		{ 1, { { 0, 1 }, } },
 	/* aks_0100 */                  { 1, { { 0, -1 }, } },
 	/* mobility_pp */		{ 1, { { 0, 1 }, } },
 	/* netmos_9705 */               { 1, { { 0, -1 }, } }, /* untested */
@@ -2928,7 +2930,6 @@
 	{ 0x1409, 0x7268, 0x1409, 0x0103, 0, 0, timedia_4008a },
 	{ 0x1409, 0x7268, 0x1409, 0x0104, 0, 0, timedia_4018 },
 	{ 0x1409, 0x7268, 0x1409, 0x9018, 0, 0, timedia_9018a },
-	{ 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp },
 	{ PCI_VENDOR_ID_SYBA, PCI_DEVICE_ID_SYBA_2P_EPP,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_2p_epp },
 	{ PCI_VENDOR_ID_SYBA, PCI_DEVICE_ID_SYBA_1P_ECP,
@@ -2946,8 +2947,25 @@
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_954 },
 	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_12PCI840,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_840 },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe840,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe840_G,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_0,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_0_G,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_1,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_1_G,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_1_U,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
 	{ PCI_VENDOR_ID_AKS, PCI_DEVICE_ID_AKS_ALADDINCARD,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, aks_0100 },
+	{ 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp },
 	/* NetMos communication controllers */
 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9705,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9705 },
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 4b47f4e..af3bfe2 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -3,7 +3,8 @@
 #
 
 obj-y		+= access.o bus.o probe.o remove.o pci.o quirks.o slot.o \
-			pci-driver.o search.o pci-sysfs.o rom.o setup-res.o
+			pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
+			irq.o
 obj-$(CONFIG_PROC_FS) += proc.o
 
 # Build PCI Express stuff if needed
diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c
index 8b29c30..691b3ad 100644
--- a/drivers/pci/dmar.c
+++ b/drivers/pci/dmar.c
@@ -188,8 +188,7 @@
 	return 0;
 }
 
-static int __init
-dmar_parse_dev(struct dmar_drhd_unit *dmaru)
+static int __init dmar_parse_dev(struct dmar_drhd_unit *dmaru)
 {
 	struct acpi_dmar_hardware_unit *drhd;
 	static int include_all;
@@ -277,14 +276,15 @@
 		drhd = (struct acpi_dmar_hardware_unit *)header;
 		printk (KERN_INFO PREFIX
 			"DRHD (flags: 0x%08x)base: 0x%016Lx\n",
-			drhd->flags, drhd->address);
+			drhd->flags, (unsigned long long)drhd->address);
 		break;
 	case ACPI_DMAR_TYPE_RESERVED_MEMORY:
 		rmrr = (struct acpi_dmar_reserved_memory *)header;
 
 		printk (KERN_INFO PREFIX
 			"RMRR base: 0x%016Lx end: 0x%016Lx\n",
-			rmrr->base_address, rmrr->end_address);
+			(unsigned long long)rmrr->base_address,
+			(unsigned long long)rmrr->end_address);
 		break;
 	}
 }
@@ -328,7 +328,7 @@
 	if (!dmar)
 		return -ENODEV;
 
-	if (dmar->width < PAGE_SHIFT_4K - 1) {
+	if (dmar->width < PAGE_SHIFT - 1) {
 		printk(KERN_WARNING PREFIX "Invalid DMAR haw\n");
 		return -EINVAL;
 	}
@@ -460,8 +460,8 @@
 
 	ret = dmar_table_detect();
 
-#ifdef CONFIG_DMAR
 	{
+#ifdef CONFIG_INTR_REMAP
 		struct acpi_table_dmar *dmar;
 		/*
 		 * for now we will disable dma-remapping when interrupt
@@ -470,29 +470,17 @@
 		 * is added, we will not need this any more.
 		 */
 		dmar = (struct acpi_table_dmar *) dmar_tbl;
-		if (ret && cpu_has_x2apic && dmar->flags & 0x1) {
+		if (ret && cpu_has_x2apic && dmar->flags & 0x1)
 			printk(KERN_INFO
 			       "Queued invalidation will be enabled to support "
 			       "x2apic and Intr-remapping.\n");
-			printk(KERN_INFO
-			       "Disabling IOMMU detection, because of missing "
-			       "queued invalidation support for IOTLB "
-			       "invalidation\n");
-			printk(KERN_INFO
-			       "Use \"nox2apic\", if you want to use Intel "
-			       " IOMMU for DMA-remapping and don't care about "
-			       " x2apic support\n");
-
-			dmar_disabled = 1;
-			goto end;
-		}
-
+#endif
+#ifdef CONFIG_DMAR
 		if (ret && !no_iommu && !iommu_detected && !swiotlb &&
 		    !dmar_disabled)
 			iommu_detected = 1;
-	}
-end:
 #endif
+	}
 	dmar_tbl = NULL;
 }
 
@@ -510,7 +498,7 @@
 
 	iommu->seq_id = iommu_allocated++;
 
-	iommu->reg = ioremap(drhd->reg_base_addr, PAGE_SIZE_4K);
+	iommu->reg = ioremap(drhd->reg_base_addr, VTD_PAGE_SIZE);
 	if (!iommu->reg) {
 		printk(KERN_ERR "IOMMU: can't map the region\n");
 		goto error;
@@ -521,8 +509,8 @@
 	/* the registers might be more than one page */
 	map_size = max_t(int, ecap_max_iotlb_offset(iommu->ecap),
 		cap_max_fault_reg_offset(iommu->cap));
-	map_size = PAGE_ALIGN_4K(map_size);
-	if (map_size > PAGE_SIZE_4K) {
+	map_size = VTD_PAGE_ALIGN(map_size);
+	if (map_size > VTD_PAGE_SIZE) {
 		iounmap(iommu->reg);
 		iommu->reg = ioremap(drhd->reg_base_addr, map_size);
 		if (!iommu->reg) {
@@ -533,8 +521,10 @@
 
 	ver = readl(iommu->reg + DMAR_VER_REG);
 	pr_debug("IOMMU %llx: ver %d:%d cap %llx ecap %llx\n",
-		drhd->reg_base_addr, DMAR_VER_MAJOR(ver), DMAR_VER_MINOR(ver),
-		iommu->cap, iommu->ecap);
+		(unsigned long long)drhd->reg_base_addr,
+		DMAR_VER_MAJOR(ver), DMAR_VER_MINOR(ver),
+		(unsigned long long)iommu->cap,
+		(unsigned long long)iommu->ecap);
 
 	spin_lock_init(&iommu->register_lock);
 
@@ -587,11 +577,11 @@
 
 	hw = qi->desc;
 
-	spin_lock(&qi->q_lock);
+	spin_lock_irqsave(&qi->q_lock, flags);
 	while (qi->free_cnt < 3) {
-		spin_unlock(&qi->q_lock);
+		spin_unlock_irqrestore(&qi->q_lock, flags);
 		cpu_relax();
-		spin_lock(&qi->q_lock);
+		spin_lock_irqsave(&qi->q_lock, flags);
 	}
 
 	index = qi->free_head;
@@ -612,15 +602,22 @@
 	qi->free_head = (qi->free_head + 2) % QI_LENGTH;
 	qi->free_cnt -= 2;
 
-	spin_lock_irqsave(&iommu->register_lock, flags);
+	spin_lock(&iommu->register_lock);
 	/*
 	 * update the HW tail register indicating the presence of
 	 * new descriptors.
 	 */
 	writel(qi->free_head << 4, iommu->reg + DMAR_IQT_REG);
-	spin_unlock_irqrestore(&iommu->register_lock, flags);
+	spin_unlock(&iommu->register_lock);
 
 	while (qi->desc_status[wait_index] != QI_DONE) {
+		/*
+		 * We will leave the interrupts disabled, to prevent interrupt
+		 * context to queue another cmd while a cmd is already submitted
+		 * and waiting for completion on this cpu. This is to avoid
+		 * a deadlock where the interrupt context can wait indefinitely
+		 * for free slots in the queue.
+		 */
 		spin_unlock(&qi->q_lock);
 		cpu_relax();
 		spin_lock(&qi->q_lock);
@@ -629,7 +626,7 @@
 	qi->desc_status[index] = QI_DONE;
 
 	reclaim_free_desc(qi);
-	spin_unlock(&qi->q_lock);
+	spin_unlock_irqrestore(&qi->q_lock, flags);
 }
 
 /*
@@ -645,6 +642,62 @@
 	qi_submit_sync(&desc, iommu);
 }
 
+int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm,
+		     u64 type, int non_present_entry_flush)
+{
+
+	struct qi_desc desc;
+
+	if (non_present_entry_flush) {
+		if (!cap_caching_mode(iommu->cap))
+			return 1;
+		else
+			did = 0;
+	}
+
+	desc.low = QI_CC_FM(fm) | QI_CC_SID(sid) | QI_CC_DID(did)
+			| QI_CC_GRAN(type) | QI_CC_TYPE;
+	desc.high = 0;
+
+	qi_submit_sync(&desc, iommu);
+
+	return 0;
+
+}
+
+int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
+		   unsigned int size_order, u64 type,
+		   int non_present_entry_flush)
+{
+	u8 dw = 0, dr = 0;
+
+	struct qi_desc desc;
+	int ih = 0;
+
+	if (non_present_entry_flush) {
+		if (!cap_caching_mode(iommu->cap))
+			return 1;
+		else
+			did = 0;
+	}
+
+	if (cap_write_drain(iommu->cap))
+		dw = 1;
+
+	if (cap_read_drain(iommu->cap))
+		dr = 1;
+
+	desc.low = QI_IOTLB_DID(did) | QI_IOTLB_DR(dr) | QI_IOTLB_DW(dw)
+		| QI_IOTLB_GRAN(type) | QI_IOTLB_TYPE;
+	desc.high = QI_IOTLB_ADDR(addr) | QI_IOTLB_IH(ih)
+		| QI_IOTLB_AM(size_order);
+
+	qi_submit_sync(&desc, iommu);
+
+	return 0;
+
+}
+
 /*
  * Enable Queued Invalidation interface. This is a must to support
  * interrupt-remapping. Also used by DMA-remapping, which replaces
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index 5a58b07..f9e244d 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -50,9 +50,6 @@
 #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
 
-/* name size which is used for entries in pcihpfs */
-#define SLOT_NAME_SIZE	20		/* {_SUN} */
-
 struct acpiphp_bridge;
 struct acpiphp_slot;
 
@@ -63,9 +60,13 @@
 	struct hotplug_slot	*hotplug_slot;
 	struct acpiphp_slot	*acpi_slot;
 	struct hotplug_slot_info info;
-	char name[SLOT_NAME_SIZE];
 };
 
+static inline const char *slot_name(struct slot *slot)
+{
+	return hotplug_slot_name(slot->hotplug_slot);
+}
+
 /*
  * struct acpiphp_bridge - PCI bridge information
  *
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 0e496e8..95b536a 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -44,6 +44,9 @@
 
 #define MY_NAME	"acpiphp"
 
+/* name size which is used for entries in pcihpfs */
+#define SLOT_NAME_SIZE  21              /* {_SUN} */
+
 static int debug;
 int acpiphp_debug;
 
@@ -84,7 +87,6 @@
 	.get_adapter_status	= get_adapter_status,
 };
 
-
 /**
  * acpiphp_register_attention - set attention LED callback
  * @info: must be completely filled with LED callbacks
@@ -136,7 +138,7 @@
 {
 	struct slot *slot = hotplug_slot->private;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	/* enable the specified slot */
 	return acpiphp_enable_slot(slot->acpi_slot);
@@ -154,7 +156,7 @@
 	struct slot *slot = hotplug_slot->private;
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	/* disable the specified slot */
 	retval = acpiphp_disable_slot(slot->acpi_slot);
@@ -177,7 +179,7 @@
  {
 	int retval = -ENODEV;
 
- 	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot_name(hotplug_slot));
  
 	if (attention_info && try_module_get(attention_info->owner)) {
 		retval = attention_info->set_attn(hotplug_slot, status);
@@ -200,7 +202,7 @@
 {
 	struct slot *slot = hotplug_slot->private;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	*value = acpiphp_get_power_status(slot->acpi_slot);
 
@@ -222,7 +224,7 @@
 {
 	int retval = -EINVAL;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot_name(hotplug_slot));
 
 	if (attention_info && try_module_get(attention_info->owner)) {
 		retval = attention_info->get_attn(hotplug_slot, value);
@@ -245,7 +247,7 @@
 {
 	struct slot *slot = hotplug_slot->private;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	*value = acpiphp_get_latch_status(slot->acpi_slot);
 
@@ -265,7 +267,7 @@
 {
 	struct slot *slot = hotplug_slot->private;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	*value = acpiphp_get_adapter_status(slot->acpi_slot);
 
@@ -299,7 +301,7 @@
 {
 	struct slot *slot = hotplug_slot->private;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	kfree(slot->hotplug_slot);
 	kfree(slot);
@@ -310,6 +312,7 @@
 {
 	struct slot *slot;
 	int retval = -ENOMEM;
+	char name[SLOT_NAME_SIZE];
 
 	slot = kzalloc(sizeof(*slot), GFP_KERNEL);
 	if (!slot)
@@ -321,8 +324,6 @@
 
 	slot->hotplug_slot->info = &slot->info;
 
-	slot->hotplug_slot->name = slot->name;
-
 	slot->hotplug_slot->private = slot;
 	slot->hotplug_slot->release = &release_slot;
 	slot->hotplug_slot->ops = &acpi_hotplug_slot_ops;
@@ -336,11 +337,12 @@
 	slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
 
 	acpiphp_slot->slot = slot;
-	snprintf(slot->name, sizeof(slot->name), "%u", slot->acpi_slot->sun);
+	snprintf(name, SLOT_NAME_SIZE, "%u", slot->acpi_slot->sun);
 
 	retval = pci_hp_register(slot->hotplug_slot,
 					acpiphp_slot->bridge->pci_bus,
-					acpiphp_slot->device);
+					acpiphp_slot->device,
+					name);
 	if (retval == -EBUSY)
 		goto error_hpslot;
 	if (retval) {
@@ -348,7 +350,7 @@
 		goto error_hpslot;
  	}
 
-	info("Slot [%s] registered\n", slot->hotplug_slot->name);
+	info("Slot [%s] registered\n", slot_name(slot));
 
 	return 0;
 error_hpslot:
@@ -365,7 +367,7 @@
 	struct slot *slot = acpiphp_slot->slot;
 	int retval = 0;
 
-	info ("Slot [%s] unregistered\n", slot->hotplug_slot->name);
+	info("Slot [%s] unregistered\n", slot_name(slot));
 
 	retval = pci_hp_deregister(slot->hotplug_slot);
 	if (retval)
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index a3e4705..955aae4 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -169,7 +169,9 @@
 }
 
 
-
+static struct acpi_dock_ops acpiphp_dock_ops = {
+	.handler = handle_hotplug_event_func,
+};
 
 /* callback routine to register each ACPI PCI slot object */
 static acpi_status
@@ -180,7 +182,7 @@
 	struct acpiphp_func *newfunc;
 	acpi_handle tmp;
 	acpi_status status = AE_OK;
-	unsigned long adr, sun;
+	unsigned long long adr, sun;
 	int device, function, retval;
 
 	status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
@@ -285,7 +287,7 @@
 		 */
 		newfunc->flags &= ~FUNC_HAS_EJ0;
 		if (register_hotplug_dock_device(handle,
-			handle_hotplug_event_func, newfunc))
+			&acpiphp_dock_ops, newfunc))
 			dbg("failed to register dock device\n");
 
 		/* we need to be notified when dock events happen
@@ -528,7 +530,7 @@
 {
 	acpi_status status;
 	acpi_handle dummy_handle;
-	unsigned long tmp;
+	unsigned long long tmp;
 	int device, function;
 	struct pci_dev *dev;
 	struct pci_bus *pci_bus = context;
@@ -573,7 +575,7 @@
 static int add_bridge(acpi_handle handle)
 {
 	acpi_status status;
-	unsigned long tmp;
+	unsigned long long tmp;
 	int seg, bus;
 	acpi_handle dummy_handle;
 	struct pci_bus *pci_bus;
@@ -767,7 +769,7 @@
 {
 	acpi_status status;
 	int result = -1;
-	unsigned long gsb;
+	unsigned long long gsb;
 	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
 	union acpi_object *obj;
 	void *table;
@@ -808,7 +810,7 @@
 ioapic_add(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
 	acpi_status status;
-	unsigned long sta;
+	unsigned long long sta;
 	acpi_handle tmp;
 	struct pci_dev *pdev;
 	u32 gsi_base;
@@ -872,7 +874,7 @@
 ioapic_remove(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
 	acpi_status status;
-	unsigned long sta;
+	unsigned long long sta;
 	acpi_handle tmp;
 	u32 gsi_base;
 	struct acpiphp_ioapic *pos, *n, *ioapic = NULL;
@@ -1264,7 +1266,7 @@
 static unsigned int get_slot_status(struct acpiphp_slot *slot)
 {
 	acpi_status status;
-	unsigned long sta = 0;
+	unsigned long long sta = 0;
 	u32 dvid;
 	struct list_head *l;
 	struct acpiphp_func *func;
diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c
index 2b7c45e..881fdd2 100644
--- a/drivers/pci/hotplug/acpiphp_ibm.c
+++ b/drivers/pci/hotplug/acpiphp_ibm.c
@@ -183,7 +183,7 @@
 	union acpi_object args[2]; 
 	struct acpi_object_list params = { .pointer = args, .count = 2 };
 	acpi_status stat; 
-	unsigned long rc;
+	unsigned long long rc;
 	union apci_descriptor *ibm_slot;
 
 	ibm_slot = ibm_slot_from_id(hpslot_to_sun(slot));
@@ -204,7 +204,7 @@
 		err("APLS evaluation failed:  0x%08x\n", stat);
 		return -ENODEV;
 	} else if (!rc) {
-		err("APLS method failed:  0x%08lx\n", rc);
+		err("APLS method failed:  0x%08llx\n", rc);
 		return -ERANGE;
 	}
 	return 0;
diff --git a/drivers/pci/hotplug/cpci_hotplug.h b/drivers/pci/hotplug/cpci_hotplug.h
index d9769b3..9fff878 100644
--- a/drivers/pci/hotplug/cpci_hotplug.h
+++ b/drivers/pci/hotplug/cpci_hotplug.h
@@ -30,6 +30,7 @@
 
 #include <linux/types.h>
 #include <linux/pci.h>
+#include <linux/pci_hotplug.h>
 
 /* PICMG 2.1 R2.0 HS CSR bits: */
 #define HS_CSR_INS	0x0080
@@ -69,6 +70,11 @@
 	struct cpci_hp_controller_ops *ops;
 };
 
+static inline const char *slot_name(struct slot *slot)
+{
+	return hotplug_slot_name(slot->hotplug_slot);
+}
+
 extern int cpci_hp_register_controller(struct cpci_hp_controller *controller);
 extern int cpci_hp_unregister_controller(struct cpci_hp_controller *controller);
 extern int cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last);
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index 9359479..de94f4f 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -108,7 +108,7 @@
 	struct slot *slot = hotplug_slot->private;
 	int retval = 0;
 
-	dbg("%s - physical_slot = %s", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s", __func__, slot_name(slot));
 
 	if (controller->ops->set_power)
 		retval = controller->ops->set_power(slot, 1);
@@ -121,25 +121,23 @@
 	struct slot *slot = hotplug_slot->private;
 	int retval = 0;
 
-	dbg("%s - physical_slot = %s", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s", __func__, slot_name(slot));
 
 	down_write(&list_rwsem);
 
 	/* Unconfigure device */
-	dbg("%s - unconfiguring slot %s",
-	    __func__, slot->hotplug_slot->name);
+	dbg("%s - unconfiguring slot %s", __func__, slot_name(slot));
 	if ((retval = cpci_unconfigure_slot(slot))) {
 		err("%s - could not unconfigure slot %s",
-		    __func__, slot->hotplug_slot->name);
+		    __func__, slot_name(slot));
 		goto disable_error;
 	}
-	dbg("%s - finished unconfiguring slot %s",
-	    __func__, slot->hotplug_slot->name);
+	dbg("%s - finished unconfiguring slot %s", __func__, slot_name(slot));
 
 	/* Clear EXT (by setting it) */
 	if (cpci_clear_ext(slot)) {
 		err("%s - could not clear EXT for slot %s",
-		    __func__, slot->hotplug_slot->name);
+		    __func__, slot_name(slot));
 		retval = -ENODEV;
 		goto disable_error;
 	}
@@ -214,7 +212,6 @@
 	struct slot *slot = hotplug_slot->private;
 
 	kfree(slot->hotplug_slot->info);
-	kfree(slot->hotplug_slot->name);
 	kfree(slot->hotplug_slot);
 	if (slot->dev)
 		pci_dev_put(slot->dev);
@@ -222,12 +219,6 @@
 }
 
 #define SLOT_NAME_SIZE	6
-static void
-make_slot_name(struct slot *slot)
-{
-	snprintf(slot->hotplug_slot->name,
-		 SLOT_NAME_SIZE, "%02x:%02x", slot->bus->number, slot->number);
-}
 
 int
 cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last)
@@ -235,7 +226,7 @@
 	struct slot *slot;
 	struct hotplug_slot *hotplug_slot;
 	struct hotplug_slot_info *info;
-	char *name;
+	char name[SLOT_NAME_SIZE];
 	int status = -ENOMEM;
 	int i;
 
@@ -262,34 +253,31 @@
 			goto error_hpslot;
 		hotplug_slot->info = info;
 
-		name = kmalloc(SLOT_NAME_SIZE, GFP_KERNEL);
-		if (!name)
-			goto error_info;
-		hotplug_slot->name = name;
-
 		slot->bus = bus;
 		slot->number = i;
 		slot->devfn = PCI_DEVFN(i, 0);
 
+		snprintf(name, SLOT_NAME_SIZE, "%02x:%02x", bus->number, i);
+
 		hotplug_slot->private = slot;
 		hotplug_slot->release = &release_slot;
-		make_slot_name(slot);
 		hotplug_slot->ops = &cpci_hotplug_slot_ops;
 
 		/*
 		 * Initialize the slot info structure with some known
 		 * good values.
 		 */
-		dbg("initializing slot %s", slot->hotplug_slot->name);
+		dbg("initializing slot %s", name);
 		info->power_status = cpci_get_power_status(slot);
 		info->attention_status = cpci_get_attention_status(slot);
 
-		dbg("registering slot %s", slot->hotplug_slot->name);
-		status = pci_hp_register(slot->hotplug_slot, bus, i);
+		dbg("registering slot %s", name);
+		status = pci_hp_register(slot->hotplug_slot, bus, i, name);
 		if (status) {
 			err("pci_hp_register failed with error %d", status);
-			goto error_name;
+			goto error_info;
 		}
+		dbg("slot registered with name: %s", slot_name(slot));
 
 		/* Add slot to our internal list */
 		down_write(&list_rwsem);
@@ -298,8 +286,6 @@
 		up_write(&list_rwsem);
 	}
 	return 0;
-error_name:
-	kfree(name);
 error_info:
 	kfree(info);
 error_hpslot:
@@ -327,7 +313,7 @@
 			list_del(&slot->slot_list);
 			slots--;
 
-			dbg("deregistering slot %s", slot->hotplug_slot->name);
+			dbg("deregistering slot %s", slot_name(slot));
 			status = pci_hp_deregister(slot->hotplug_slot);
 			if (status) {
 				err("pci_hp_deregister failed with error %d",
@@ -379,11 +365,10 @@
 		return -1;
 	}
 	list_for_each_entry(slot, &slot_list, slot_list) {
-		dbg("%s - looking at slot %s",
-		    __func__, slot->hotplug_slot->name);
+		dbg("%s - looking at slot %s", __func__, slot_name(slot));
 		if (clear_ins && cpci_check_and_clear_ins(slot))
 			dbg("%s - cleared INS for slot %s",
-			    __func__, slot->hotplug_slot->name);
+			    __func__, slot_name(slot));
 		dev = pci_get_slot(slot->bus, PCI_DEVFN(slot->number, 0));
 		if (dev) {
 			if (update_adapter_status(slot->hotplug_slot, 1))
@@ -414,8 +399,7 @@
 	}
 	extracted = inserted = 0;
 	list_for_each_entry(slot, &slot_list, slot_list) {
-		dbg("%s - looking at slot %s",
-		    __func__, slot->hotplug_slot->name);
+		dbg("%s - looking at slot %s", __func__, slot_name(slot));
 		if (cpci_check_and_clear_ins(slot)) {
 			/*
 			 * Some broken hardware (e.g. PLX 9054AB) asserts
@@ -423,35 +407,34 @@
 			 */
 			if (slot->dev) {
 				warn("slot %s already inserted",
-				     slot->hotplug_slot->name);
+				     slot_name(slot));
 				inserted++;
 				continue;
 			}
 
 			/* Process insertion */
-			dbg("%s - slot %s inserted",
-			    __func__, slot->hotplug_slot->name);
+			dbg("%s - slot %s inserted", __func__, slot_name(slot));
 
 			/* GSM, debug */
 			hs_csr = cpci_get_hs_csr(slot);
 			dbg("%s - slot %s HS_CSR (1) = %04x",
-			    __func__, slot->hotplug_slot->name, hs_csr);
+			    __func__, slot_name(slot), hs_csr);
 
 			/* Configure device */
 			dbg("%s - configuring slot %s",
-			    __func__, slot->hotplug_slot->name);
+			    __func__, slot_name(slot));
 			if (cpci_configure_slot(slot)) {
 				err("%s - could not configure slot %s",
-				    __func__, slot->hotplug_slot->name);
+				    __func__, slot_name(slot));
 				continue;
 			}
 			dbg("%s - finished configuring slot %s",
-			    __func__, slot->hotplug_slot->name);
+			    __func__, slot_name(slot));
 
 			/* GSM, debug */
 			hs_csr = cpci_get_hs_csr(slot);
 			dbg("%s - slot %s HS_CSR (2) = %04x",
-			    __func__, slot->hotplug_slot->name, hs_csr);
+			    __func__, slot_name(slot), hs_csr);
 
 			if (update_latch_status(slot->hotplug_slot, 1))
 				warn("failure to update latch file");
@@ -464,18 +447,18 @@
 			/* GSM, debug */
 			hs_csr = cpci_get_hs_csr(slot);
 			dbg("%s - slot %s HS_CSR (3) = %04x",
-			    __func__, slot->hotplug_slot->name, hs_csr);
+			    __func__, slot_name(slot), hs_csr);
 
 			inserted++;
 		} else if (cpci_check_ext(slot)) {
 			/* Process extraction request */
 			dbg("%s - slot %s extracted",
-			    __func__, slot->hotplug_slot->name);
+			    __func__, slot_name(slot));
 
 			/* GSM, debug */
 			hs_csr = cpci_get_hs_csr(slot);
 			dbg("%s - slot %s HS_CSR = %04x",
-			    __func__, slot->hotplug_slot->name, hs_csr);
+			    __func__, slot_name(slot), hs_csr);
 
 			if (!slot->extracting) {
 				if (update_latch_status(slot->hotplug_slot, 0)) {
@@ -493,7 +476,7 @@
 				 * bother trying to tell the driver or not?
 				 */
 				err("card in slot %s was improperly removed",
-				    slot->hotplug_slot->name);
+				    slot_name(slot));
 				if (update_adapter_status(slot->hotplug_slot, 0))
 					warn("failure to update adapter file");
 				slot->extracting = 0;
diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c
index df82b95..829c327 100644
--- a/drivers/pci/hotplug/cpci_hotplug_pci.c
+++ b/drivers/pci/hotplug/cpci_hotplug_pci.c
@@ -209,7 +209,7 @@
 					      hs_cap + 2,
 					      hs_csr)) {
 			err("Could not set LOO for slot %s",
-			    slot->hotplug_slot->name);
+			    hotplug_slot_name(slot->hotplug_slot));
 			return -ENODEV;
 		}
 	}
@@ -238,7 +238,7 @@
 					      hs_cap + 2,
 					      hs_csr)) {
 			err("Could not clear LOO for slot %s",
-			    slot->hotplug_slot->name);
+			    hotplug_slot_name(slot->hotplug_slot));
 			return -ENODEV;
 		}
 	}
diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h
index b1decfa..afaf8f6 100644
--- a/drivers/pci/hotplug/cpqphp.h
+++ b/drivers/pci/hotplug/cpqphp.h
@@ -449,6 +449,11 @@
 
 /* inline functions */
 
+static inline char *slot_name(struct slot *slot)
+{
+	return hotplug_slot_name(slot->hotplug_slot);
+}
+
 /*
  * return_resource
  *
@@ -696,14 +701,6 @@
 	return presence_save;
 }
 
-#define SLOT_NAME_SIZE 10
-
-static inline void make_slot_name(char *buffer, int buffer_size, struct slot *slot)
-{
-	snprintf(buffer, buffer_size, "%d", slot->number);
-}
-
-
 static inline int wait_for_ctrl_irq(struct controller *ctrl)
 {
         DECLARE_WAITQUEUE(wait, current);
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index 54defec..8514c3a 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -315,14 +315,15 @@
 {
 	struct slot *slot = hotplug_slot->private;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	kfree(slot->hotplug_slot->info);
-	kfree(slot->hotplug_slot->name);
 	kfree(slot->hotplug_slot);
 	kfree(slot);
 }
 
+#define SLOT_NAME_SIZE 10
+
 static int ctrl_slot_setup(struct controller *ctrl,
 			void __iomem *smbios_start,
 			void __iomem *smbios_table)
@@ -335,6 +336,7 @@
 	u8 slot_number;
 	u8 ctrl_slot;
 	u32 tempdword;
+	char name[SLOT_NAME_SIZE];
 	void __iomem *slot_entry= NULL;
 	int result = -ENOMEM;
 
@@ -363,16 +365,12 @@
 		if (!hotplug_slot->info)
 			goto error_hpslot;
 		hotplug_slot_info = hotplug_slot->info;
-		hotplug_slot->name = kmalloc(SLOT_NAME_SIZE, GFP_KERNEL);
-
-		if (!hotplug_slot->name)
-			goto error_info;
 
 		slot->ctrl = ctrl;
 		slot->bus = ctrl->bus;
 		slot->device = slot_device;
 		slot->number = slot_number;
-		dbg("slot->number = %d\n", slot->number);
+		dbg("slot->number = %u\n", slot->number);
 
 		slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9,
 					slot_entry);
@@ -418,9 +416,9 @@
 		/* register this slot with the hotplug pci core */
 		hotplug_slot->release = &release_slot;
 		hotplug_slot->private = slot;
-		make_slot_name(hotplug_slot->name, SLOT_NAME_SIZE, slot);
+		snprintf(name, SLOT_NAME_SIZE, "%u", slot->number);
 		hotplug_slot->ops = &cpqphp_hotplug_slot_ops;
-		
+
 		hotplug_slot_info->power_status = get_slot_enabled(ctrl, slot);
 		hotplug_slot_info->attention_status =
 			cpq_get_attention_status(ctrl, slot);
@@ -435,11 +433,12 @@
 				slot->number, ctrl->slot_device_offset,
 				slot_number);
 		result = pci_hp_register(hotplug_slot,
-					 ctrl->pci_dev->subordinate,
-					 slot->device);
+					 ctrl->pci_dev->bus,
+					 slot->device,
+					 name);
 		if (result) {
 			err("pci_hp_register failed with error %d\n", result);
-			goto error_name;
+			goto error_info;
 		}
 		
 		slot->next = ctrl->slot;
@@ -451,8 +450,6 @@
 	}
 
 	return 0;
-error_name:
-	kfree(hotplug_slot->name);
 error_info:
 	kfree(hotplug_slot_info);
 error_hpslot:
@@ -638,7 +635,7 @@
 	u8 device;
 	u8 function;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1)
 		return -ENODEV;
@@ -665,7 +662,7 @@
 	u8 device;
 	u8 function;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1)
 		return -ENODEV;
@@ -697,7 +694,7 @@
 	u8 device;
 	u8 function;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1)
 		return -ENODEV;
@@ -720,7 +717,7 @@
 	struct slot *slot = hotplug_slot->private;
 	struct controller *ctrl = slot->ctrl;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	return cpqhp_hardware_test(ctrl, value);	
 }
@@ -731,7 +728,7 @@
 	struct slot *slot = hotplug_slot->private;
 	struct controller *ctrl = slot->ctrl;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	*value = get_slot_enabled(ctrl, slot);
 	return 0;
@@ -742,7 +739,7 @@
 	struct slot *slot = hotplug_slot->private;
 	struct controller *ctrl = slot->ctrl;
 	
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	*value = cpq_get_attention_status(ctrl, slot);
 	return 0;
@@ -753,7 +750,7 @@
 	struct slot *slot = hotplug_slot->private;
 	struct controller *ctrl = slot->ctrl;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	*value = cpq_get_latch_status(ctrl, slot);
 
@@ -765,7 +762,7 @@
 	struct slot *slot = hotplug_slot->private;
 	struct controller *ctrl = slot->ctrl;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	*value = get_presence_status(ctrl, slot);
 
@@ -777,7 +774,7 @@
 	struct slot *slot = hotplug_slot->private;
 	struct controller *ctrl = slot->ctrl;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	*value = ctrl->speed_capability;
 
@@ -789,7 +786,7 @@
 	struct slot *slot = hotplug_slot->private;
 	struct controller *ctrl = slot->ctrl;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
 
 	*value = ctrl->speed;
 
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index ef041ca..a60a252 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -1139,7 +1139,7 @@
 	for(slot = ctrl->slot; slot; slot = slot->next) {
 		if (slot->device == (hp_slot + ctrl->slot_device_offset)) 
 			continue;
-		if (!slot->hotplug_slot && !slot->hotplug_slot->info) 
+		if (!slot->hotplug_slot || !slot->hotplug_slot->info)
 			continue;
 		if (slot->hotplug_slot->info->adapter_status == 0) 
 			continue;
diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index 146ca9c..3a2637a 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -66,10 +66,10 @@
 	struct pci_dev *dev;
 	struct work_struct remove_work;
 	unsigned long removed;
-	char name[8];
 };
 
 static int debug;
+static int dup_slots;
 static LIST_HEAD(slot_list);
 static struct workqueue_struct *dummyphp_wq;
 
@@ -96,10 +96,13 @@
 	kfree(dslot);
 }
 
+#define SLOT_NAME_SIZE	8
+
 static int add_slot(struct pci_dev *dev)
 {
 	struct dummy_slot *dslot;
 	struct hotplug_slot *slot;
+	char name[SLOT_NAME_SIZE];
 	int retval = -ENOMEM;
 	static int count = 1;
 
@@ -119,19 +122,22 @@
 	if (!dslot)
 		goto error_info;
 
-	slot->name = dslot->name;
-	snprintf(slot->name, sizeof(dslot->name), "fake%d", count++);
-	dbg("slot->name = %s\n", slot->name);
+	if (dup_slots)
+		snprintf(name, SLOT_NAME_SIZE, "fake");
+	else
+		snprintf(name, SLOT_NAME_SIZE, "fake%d", count++);
+	dbg("slot->name = %s\n", name);
 	slot->ops = &dummy_hotplug_slot_ops;
 	slot->release = &dummy_release;
 	slot->private = dslot;
 
-	retval = pci_hp_register(slot, dev->bus, PCI_SLOT(dev->devfn));
+	retval = pci_hp_register(slot, dev->bus, PCI_SLOT(dev->devfn), name);
 	if (retval) {
 		err("pci_hp_register failed with error %d\n", retval);
 		goto error_dslot;
 	}
 
+	dbg("slot->name = %s\n", hotplug_slot_name(slot));
 	dslot->slot = slot;
 	dslot->dev = pci_dev_get(dev);
 	list_add (&dslot->node, &slot_list);
@@ -167,10 +173,11 @@
 {
 	int retval;
 
-	dbg("removing slot %s\n", dslot->slot->name);
+	dbg("removing slot %s\n", hotplug_slot_name(dslot->slot));
 	retval = pci_hp_deregister(dslot->slot);
 	if (retval)
-		err("Problem unregistering a slot %s\n", dslot->slot->name);
+		err("Problem unregistering a slot %s\n",
+			hotplug_slot_name(dslot->slot));
 }
 
 /* called from the single-threaded workqueue handler to remove a slot */
@@ -308,7 +315,7 @@
 		return -ENODEV;
 	dslot = slot->private;
 
-	dbg("%s - physical_slot = %s\n", __func__, slot->name);
+	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot_name(slot));
 
 	for (func = 7; func >= 0; func--) {
 		dev = pci_get_slot(dslot->dev->bus, dslot->dev->devfn + func);
@@ -373,4 +380,5 @@
 MODULE_LICENSE("GPL");
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
-
+module_param(dup_slots, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(dup_slots, "Force duplicate slot names for debugging");
diff --git a/drivers/pci/hotplug/ibmphp.h b/drivers/pci/hotplug/ibmphp.h
index 612d963..a8d391a 100644
--- a/drivers/pci/hotplug/ibmphp.h
+++ b/drivers/pci/hotplug/ibmphp.h
@@ -707,17 +707,16 @@
 	u8 device;
 	u8 number;
 	u8 real_physical_slot_num;
-	char name[100];
 	u32 capabilities;
 	u8 supported_speed;
 	u8 supported_bus_mode;
+	u8 flag;		/* this is for disable slot and polling */
+	u8 ctlr_index;
 	struct hotplug_slot *hotplug_slot;
 	struct controller *ctrl;
 	struct pci_func *func;
 	u8 irq[4];
-	u8 flag;		/* this is for disable slot and polling */
 	int bit_mode;		/* 0 = 32, 1 = 64 */
-	u8 ctlr_index;
 	struct bus_info *bus_on;
 	struct list_head ibm_slot_list;
 	u8 status;
diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c
index 8cfd1c4..c1abac8 100644
--- a/drivers/pci/hotplug/ibmphp_ebda.c
+++ b/drivers/pci/hotplug/ibmphp_ebda.c
@@ -587,11 +587,14 @@
 	return first_slot + 1;
 
 }
+
+#define SLOT_NAME_SIZE 30
+
 static char *create_file_name (struct slot * slot_cur)
 {
 	struct opt_rio *opt_vg_ptr = NULL;
 	struct opt_rio_lo *opt_lo_ptr = NULL;
-	static char str[30];
+	static char str[SLOT_NAME_SIZE];
 	int which = 0; /* rxe = 1, chassis = 0 */
 	u8 number = 1; /* either chassis or rxe # */
 	u8 first_slot = 1;
@@ -703,7 +706,6 @@
 
 	slot = hotplug_slot->private;
 	kfree(slot->hotplug_slot->info);
-	kfree(slot->hotplug_slot->name);
 	kfree(slot->hotplug_slot);
 	slot->ctrl = NULL;
 	slot->bus_on = NULL;
@@ -734,6 +736,7 @@
 	struct bus_info *bus_info_ptr1, *bus_info_ptr2;
 	int rc;
 	struct slot *tmp_slot;
+	char name[SLOT_NAME_SIZE];
 
 	addr = hpc_list_ptr->phys_addr;
 	for (ctlr = 0; ctlr < hpc_list_ptr->num_ctlrs; ctlr++) {
@@ -897,12 +900,6 @@
 				goto error_no_hp_info;
 			}
 
-			hp_slot_ptr->name = kmalloc(30, GFP_KERNEL);
-			if (!hp_slot_ptr->name) {
-				rc = -ENOMEM;
-				goto error_no_hp_name;
-			}
-
 			tmp_slot = kzalloc(sizeof(*tmp_slot), GFP_KERNEL);
 			if (!tmp_slot) {
 				rc = -ENOMEM;
@@ -964,9 +961,9 @@
 	}			/* each hpc  */
 
 	list_for_each_entry(tmp_slot, &ibmphp_slot_head, ibm_slot_list) {
-		snprintf (tmp_slot->hotplug_slot->name, 30, "%s", create_file_name (tmp_slot));
+		snprintf(name, SLOT_NAME_SIZE, "%s", create_file_name(tmp_slot));
 		pci_hp_register(tmp_slot->hotplug_slot,
-			pci_find_bus(0, tmp_slot->bus), tmp_slot->device);
+			pci_find_bus(0, tmp_slot->bus), tmp_slot->device, name);
 	}
 
 	print_ebda_hpc ();
@@ -976,8 +973,6 @@
 error:
 	kfree (hp_slot_ptr->private);
 error_no_slot:
-	kfree (hp_slot_ptr->name);
-error_no_hp_name:
 	kfree (hp_slot_ptr->info);
 error_no_hp_info:
 	kfree (hp_slot_ptr);
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 2e6c447..535fce0f 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -37,6 +37,7 @@
 #include <linux/init.h>
 #include <linux/mount.h>
 #include <linux/namei.h>
+#include <linux/mutex.h>
 #include <linux/pci.h>
 #include <linux/pci_hotplug.h>
 #include <asm/uaccess.h>
@@ -61,7 +62,7 @@
 //////////////////////////////////////////////////////////////////
 
 static LIST_HEAD(pci_hotplug_slot_list);
-static DEFINE_SPINLOCK(pci_hotplug_slot_list_lock);
+static DEFINE_MUTEX(pci_hp_mutex);
 
 /* these strings match up with the values in pci_bus_speed */
 static char *pci_bus_speed_strings[] = {
@@ -530,16 +531,12 @@
 	struct hotplug_slot *slot;
 	struct list_head *tmp;
 
-	spin_lock(&pci_hotplug_slot_list_lock);
 	list_for_each (tmp, &pci_hotplug_slot_list) {
 		slot = list_entry (tmp, struct hotplug_slot, slot_list);
-		if (strcmp(slot->name, name) == 0)
-			goto out;
+		if (strcmp(hotplug_slot_name(slot), name) == 0)
+			return slot;
 	}
-	slot = NULL;
-out:
-	spin_unlock(&pci_hotplug_slot_list_lock);
-	return slot;
+	return NULL;
 }
 
 /**
@@ -547,13 +544,15 @@
  * @bus: bus this slot is on
  * @slot: pointer to the &struct hotplug_slot to register
  * @slot_nr: slot number
+ * @name: name registered with kobject core
  *
  * Registers a hotplug slot with the pci hotplug subsystem, which will allow
  * userspace interaction to the slot.
  *
  * Returns 0 if successful, anything else for an error.
  */
-int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr)
+int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr,
+			const char *name)
 {
 	int result;
 	struct pci_slot *pci_slot;
@@ -568,48 +567,29 @@
 		return -EINVAL;
 	}
 
-	/* Check if we have already registered a slot with the same name. */
-	if (get_slot_from_name(slot->name))
-		return -EEXIST;
+	mutex_lock(&pci_hp_mutex);
 
 	/*
 	 * No problems if we call this interface from both ACPI_PCI_SLOT
 	 * driver and call it here again. If we've already created the
 	 * pci_slot, the interface will simply bump the refcount.
 	 */
-	pci_slot = pci_create_slot(bus, slot_nr, slot->name);
-	if (IS_ERR(pci_slot))
-		return PTR_ERR(pci_slot);
-
-	if (pci_slot->hotplug) {
-		dbg("%s: already claimed\n", __func__);
-		pci_destroy_slot(pci_slot);
-		return -EBUSY;
+	pci_slot = pci_create_slot(bus, slot_nr, name, slot);
+	if (IS_ERR(pci_slot)) {
+		result = PTR_ERR(pci_slot);
+		goto out;
 	}
 
 	slot->pci_slot = pci_slot;
 	pci_slot->hotplug = slot;
 
-	/*
-	 * Allow pcihp drivers to override the ACPI_PCI_SLOT name.
-	 */
-	if (strcmp(kobject_name(&pci_slot->kobj), slot->name)) {
-		result = kobject_rename(&pci_slot->kobj, slot->name);
-		if (result) {
-			pci_destroy_slot(pci_slot);
-			return result;
-		}
-	}
-
-	spin_lock(&pci_hotplug_slot_list_lock);
 	list_add(&slot->slot_list, &pci_hotplug_slot_list);
-	spin_unlock(&pci_hotplug_slot_list_lock);
 
 	result = fs_add_slot(pci_slot);
 	kobject_uevent(&pci_slot->kobj, KOBJ_ADD);
-	dbg("Added slot %s to the list\n", slot->name);
-
-
+	dbg("Added slot %s to the list\n", name);
+out:
+	mutex_unlock(&pci_hp_mutex);
 	return result;
 }
 
@@ -630,21 +610,23 @@
 	if (!hotplug)
 		return -ENODEV;
 
-	temp = get_slot_from_name(hotplug->name);
-	if (temp != hotplug)
+	mutex_lock(&pci_hp_mutex);
+	temp = get_slot_from_name(hotplug_slot_name(hotplug));
+	if (temp != hotplug) {
+		mutex_unlock(&pci_hp_mutex);
 		return -ENODEV;
+	}
 
-	spin_lock(&pci_hotplug_slot_list_lock);
 	list_del(&hotplug->slot_list);
-	spin_unlock(&pci_hotplug_slot_list_lock);
 
 	slot = hotplug->pci_slot;
 	fs_remove_slot(slot);
-	dbg("Removed slot %s from the list\n", hotplug->name);
+	dbg("Removed slot %s from the list\n", hotplug_slot_name(hotplug));
 
 	hotplug->release(hotplug);
 	slot->hotplug = NULL;
 	pci_destroy_slot(slot);
+	mutex_unlock(&pci_hp_mutex);
 
 	return 0;
 }
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index c367978..b2801a7 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -74,15 +74,13 @@
 struct slot {
 	u8 bus;
 	u8 device;
-	u32 number;
 	u8 state;
-	struct timer_list task_event;
 	u8 hp_slot;
+	u32 number;
 	struct controller *ctrl;
 	struct hpc_ops *hpc_ops;
 	struct hotplug_slot *hotplug_slot;
 	struct list_head	slot_list;
-	char name[SLOT_NAME_SIZE];
 	unsigned long last_emi_toggle;
 	struct delayed_work work;	/* work for button event */
 	struct mutex lock;
@@ -112,6 +110,7 @@
 	struct timer_list poll_timer;
 	int cmd_busy;
 	unsigned int no_cmd_complete:1;
+	unsigned int link_active_reporting:1;
 };
 
 #define INT_BUTTON_IGNORE		0
@@ -175,6 +174,11 @@
 int pciehp_disable_slot(struct slot *p_slot);
 int pcie_enable_notification(struct controller *ctrl);
 
+static inline const char *slot_name(struct slot *slot)
+{
+	return hotplug_slot_name(slot->hotplug_slot);
+}
+
 static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device)
 {
 	struct slot *slot;
@@ -184,7 +188,7 @@
 			return slot;
 	}
 
-	ctrl_err(ctrl, "%s: slot (device=0x%x) not found\n", __func__, device);
+	ctrl_err(ctrl, "Slot (device=0x%02x) not found\n", device);
 	return NULL;
 }
 
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index c748a19..4b23bc3 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -184,8 +184,8 @@
 {
 	struct slot *slot = hotplug_slot->private;
 
-	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
-		 __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, hotplug_slot_name(hotplug_slot));
 
 	kfree(hotplug_slot->info);
 	kfree(hotplug_slot);
@@ -196,7 +196,7 @@
 	struct slot *slot;
 	struct hotplug_slot *hotplug_slot;
 	struct hotplug_slot_info *info;
-	int len, dup = 1;
+	char name[SLOT_NAME_SIZE];
 	int retval = -ENOMEM;
 
 	list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
@@ -210,48 +210,37 @@
 
 		/* register this slot with the hotplug pci core */
 		hotplug_slot->info = info;
-		hotplug_slot->name = slot->name;
 		hotplug_slot->private = slot;
 		hotplug_slot->release = &release_slot;
 		hotplug_slot->ops = &pciehp_hotplug_slot_ops;
-		get_power_status(hotplug_slot, &info->power_status);
-		get_attention_status(hotplug_slot, &info->attention_status);
-		get_latch_status(hotplug_slot, &info->latch_status);
-		get_adapter_status(hotplug_slot, &info->adapter_status);
 		slot->hotplug_slot = hotplug_slot;
+		snprintf(name, SLOT_NAME_SIZE, "%u", slot->number);
 
-		ctrl_dbg(ctrl, "Registering bus=%x dev=%x hp_slot=%x sun=%x "
-			 "slot_device_offset=%x\n", slot->bus, slot->device,
-			 slot->hp_slot, slot->number, ctrl->slot_device_offset);
-duplicate_name:
+ 		ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:%02x "
+ 			 "hp_slot=%x sun=%x slot_device_offset=%x\n",
+ 			 pci_domain_nr(ctrl->pci_dev->subordinate),
+ 			 slot->bus, slot->device, slot->hp_slot, slot->number,
+ 			 ctrl->slot_device_offset);
 		retval = pci_hp_register(hotplug_slot,
 					 ctrl->pci_dev->subordinate,
-					 slot->device);
+					 slot->device,
+					 name);
 		if (retval) {
-			/*
-			 * If slot N already exists, we'll try to create
-			 * slot N-1, N-2 ... N-M, until we overflow.
-			 */
-			if (retval == -EEXIST) {
-				len = snprintf(slot->name, SLOT_NAME_SIZE,
-					       "%d-%d", slot->number, dup++);
-				if (len < SLOT_NAME_SIZE)
-					goto duplicate_name;
-				else
-					ctrl_err(ctrl, "duplicate slot name "
-						 "overflow\n");
-			}
 			ctrl_err(ctrl, "pci_hp_register failed with error %d\n",
 				 retval);
 			goto error_info;
 		}
+		get_power_status(hotplug_slot, &info->power_status);
+		get_attention_status(hotplug_slot, &info->attention_status);
+		get_latch_status(hotplug_slot, &info->latch_status);
+		get_adapter_status(hotplug_slot, &info->adapter_status);
 		/* create additional sysfs entries */
 		if (EMI(ctrl)) {
 			retval = sysfs_create_file(&hotplug_slot->pci_slot->kobj,
 				&hotplug_slot_attr_lock.attr);
 			if (retval) {
 				pci_hp_deregister(hotplug_slot);
-				ctrl_err(ctrl, "cannot create additional sysfs "
+				ctrl_err(ctrl, "Cannot create additional sysfs "
 					 "entries\n");
 				goto error_info;
 			}
@@ -286,8 +275,8 @@
 {
 	struct slot *slot = hotplug_slot->private;
 
-	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
-		  __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		  __func__, slot_name(slot));
 
 	hotplug_slot->info->attention_status = status;
 
@@ -302,8 +291,8 @@
 {
 	struct slot *slot = hotplug_slot->private;
 
-	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
-		 __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	return pciehp_sysfs_enable_slot(slot);
 }
@@ -313,8 +302,8 @@
 {
 	struct slot *slot = hotplug_slot->private;
 
-	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
-		  __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		  __func__, slot_name(slot));
 
 	return pciehp_sysfs_disable_slot(slot);
 }
@@ -324,8 +313,8 @@
 	struct slot *slot = hotplug_slot->private;
 	int retval;
 
-	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
-		  __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		  __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_power_status(slot, value);
 	if (retval < 0)
@@ -339,8 +328,8 @@
 	struct slot *slot = hotplug_slot->private;
 	int retval;
 
-	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
-		  __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		  __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_attention_status(slot, value);
 	if (retval < 0)
@@ -354,8 +343,8 @@
 	struct slot *slot = hotplug_slot->private;
 	int retval;
 
-	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
-		 __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_latch_status(slot, value);
 	if (retval < 0)
@@ -369,8 +358,8 @@
 	struct slot *slot = hotplug_slot->private;
 	int retval;
 
-	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
-		 __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_adapter_status(slot, value);
 	if (retval < 0)
@@ -385,8 +374,8 @@
 	struct slot *slot = hotplug_slot->private;
 	int retval;
 
-	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
-		 __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_max_bus_speed(slot, value);
 	if (retval < 0)
@@ -400,8 +389,8 @@
 	struct slot *slot = hotplug_slot->private;
 	int retval;
 
-	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
-		 __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_cur_bus_speed(slot, value);
 	if (retval < 0)
@@ -427,7 +416,7 @@
 
 	ctrl = pcie_init(dev);
 	if (!ctrl) {
-		dev_err(&dev->device, "controller initialization failed\n");
+		dev_err(&dev->device, "Controller initialization failed\n");
 		goto err_out_none;
 	}
 	set_service_data(dev, ctrl);
@@ -436,10 +425,10 @@
 	rc = init_slots(ctrl);
 	if (rc) {
 		if (rc == -EBUSY)
-			ctrl_warn(ctrl, "slot already registered by another "
+			ctrl_warn(ctrl, "Slot already registered by another "
 				  "hotplug driver\n");
 		else
-			ctrl_err(ctrl, "slot initialization failed\n");
+			ctrl_err(ctrl, "Slot initialization failed\n");
 		goto err_out_release_ctlr;
 	}
 
@@ -536,7 +525,7 @@
  	dbg("pcie_port_service_register = %d\n", retval);
   	info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
  	if (retval)
-		dbg("%s: Failure to register service\n", __func__);
+		dbg("Failure to register service\n");
 	return retval;
 }
 
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index acb7f9e..fead63c 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -61,12 +61,12 @@
 	struct controller *ctrl = p_slot->ctrl;
 
 	/* Attention Button Change */
-	ctrl_dbg(ctrl, "Attention button interrupt received.\n");
+	ctrl_dbg(ctrl, "Attention button interrupt received\n");
 
 	/*
 	 *  Button pressed - See if need to TAKE ACTION!!!
 	 */
-	ctrl_info(ctrl, "Button pressed on Slot(%s)\n", p_slot->name);
+	ctrl_info(ctrl, "Button pressed on Slot(%s)\n", slot_name(p_slot));
 	event_type = INT_BUTTON_PRESS;
 
 	queue_interrupt_event(p_slot, event_type);
@@ -81,20 +81,20 @@
 	struct controller *ctrl = p_slot->ctrl;
 
 	/* Switch Change */
-	ctrl_dbg(ctrl, "Switch interrupt received.\n");
+	ctrl_dbg(ctrl, "Switch interrupt received\n");
 
 	p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
 	if (getstatus) {
 		/*
 		 * Switch opened
 		 */
-		ctrl_info(ctrl, "Latch open on Slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Latch open on Slot(%s)\n", slot_name(p_slot));
 		event_type = INT_SWITCH_OPEN;
 	} else {
 		/*
 		 *  Switch closed
 		 */
-		ctrl_info(ctrl, "Latch close on Slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Latch close on Slot(%s)\n", slot_name(p_slot));
 		event_type = INT_SWITCH_CLOSE;
 	}
 
@@ -110,7 +110,7 @@
 	struct controller *ctrl = p_slot->ctrl;
 
 	/* Presence Change */
-	ctrl_dbg(ctrl, "Presence/Notify input change.\n");
+	ctrl_dbg(ctrl, "Presence/Notify input change\n");
 
 	/* Switch is open, assume a presence change
 	 * Save the presence state
@@ -120,13 +120,14 @@
 		/*
 		 * Card Present
 		 */
-		ctrl_info(ctrl, "Card present on Slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Card present on Slot(%s)\n", slot_name(p_slot));
 		event_type = INT_PRESENCE_ON;
 	} else {
 		/*
 		 * Not Present
 		 */
-		ctrl_info(ctrl, "Card not present on Slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Card not present on Slot(%s)\n",
+			  slot_name(p_slot));
 		event_type = INT_PRESENCE_OFF;
 	}
 
@@ -141,22 +142,22 @@
 	struct controller *ctrl = p_slot->ctrl;
 
 	/* power fault */
-	ctrl_dbg(ctrl, "Power fault interrupt received.\n");
+	ctrl_dbg(ctrl, "Power fault interrupt received\n");
 
 	if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) {
 		/*
 		 * power fault Cleared
 		 */
 		ctrl_info(ctrl, "Power fault cleared on Slot(%s)\n",
-			  p_slot->name);
+			  slot_name(p_slot));
 		event_type = INT_POWER_FAULT_CLEAR;
 	} else {
 		/*
 		 *   power fault
 		 */
-		ctrl_info(ctrl, "Power fault on Slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Power fault on Slot(%s)\n", slot_name(p_slot));
 		event_type = INT_POWER_FAULT;
-		ctrl_info(ctrl, "power fault bit %x set\n", 0);
+		ctrl_info(ctrl, "Power fault bit %x set\n", 0);
 	}
 
 	queue_interrupt_event(p_slot, event_type);
@@ -174,8 +175,7 @@
 	if (POWER_CTRL(ctrl)) {
 		if (pslot->hpc_ops->power_off_slot(pslot)) {
 			ctrl_err(ctrl,
-				 "%s: Issue of Slot Power Off command failed\n",
-				 __func__);
+				 "Issue of Slot Power Off command failed\n");
 			return;
 		}
 	}
@@ -192,8 +192,8 @@
 
 	if (ATTN_LED(ctrl)) {
 		if (pslot->hpc_ops->set_attention_status(pslot, 1)) {
-			ctrl_err(ctrl, "%s: Issue of Set Attention "
-				 "Led command failed\n", __func__);
+			ctrl_err(ctrl,
+				 "Issue of Set Attention Led command failed\n");
 			return;
 		}
 	}
@@ -210,8 +210,9 @@
 {
 	int retval = 0;
 	struct controller *ctrl = p_slot->ctrl;
+	struct pci_bus *parent = ctrl->pci_dev->subordinate;
 
-	ctrl_dbg(ctrl, "%s: slot device, slot offset, hp slot = %d, %d ,%d\n",
+	ctrl_dbg(ctrl, "%s: slot device, slot offset, hp slot = %d, %d, %d\n",
 		 __func__, p_slot->device, ctrl->slot_device_offset,
 		 p_slot->hp_slot);
 
@@ -225,28 +226,25 @@
 	if (PWR_LED(ctrl))
 		p_slot->hpc_ops->green_led_blink(p_slot);
 
-	/* Wait for ~1 second */
-	msleep(1000);
-
 	/* Check link training status */
 	retval = p_slot->hpc_ops->check_lnk_status(ctrl);
 	if (retval) {
-		ctrl_err(ctrl, "%s: Failed to check link status\n", __func__);
+		ctrl_err(ctrl, "Failed to check link status\n");
 		set_slot_off(ctrl, p_slot);
 		return retval;
 	}
 
 	/* Check for a power fault */
 	if (p_slot->hpc_ops->query_power_fault(p_slot)) {
-		ctrl_dbg(ctrl, "%s: power fault detected\n", __func__);
+		ctrl_dbg(ctrl, "Power fault detected\n");
 		retval = POWER_FAILURE;
 		goto err_exit;
 	}
 
 	retval = pciehp_configure_device(p_slot);
 	if (retval) {
-		ctrl_err(ctrl, "Cannot add device 0x%x:%x\n",
-			 p_slot->bus, p_slot->device);
+		ctrl_err(ctrl, "Cannot add device at %04x:%02x:%02x\n",
+			 pci_domain_nr(parent), p_slot->bus, p_slot->device);
 		goto err_exit;
 	}
 
@@ -278,14 +276,14 @@
 	if (retval)
 		return retval;
 
-	ctrl_dbg(ctrl, "In %s, hp_slot = %d\n", __func__, p_slot->hp_slot);
+	ctrl_dbg(ctrl, "%s: hp_slot = %d\n", __func__, p_slot->hp_slot);
 
 	if (POWER_CTRL(ctrl)) {
 		/* power off slot */
 		retval = p_slot->hpc_ops->power_off_slot(p_slot);
 		if (retval) {
-			ctrl_err(ctrl, "%s: Issue of Slot Disable command "
-				 "failed\n", __func__);
+			ctrl_err(ctrl,
+				 "Issue of Slot Disable command failed\n");
 			return retval;
 		}
 	}
@@ -326,8 +324,10 @@
 	switch (p_slot->state) {
 	case POWEROFF_STATE:
 		mutex_unlock(&p_slot->lock);
-		ctrl_dbg(p_slot->ctrl, "%s: disabling bus:device(%x:%x)\n",
-			 __func__, p_slot->bus, p_slot->device);
+		ctrl_dbg(p_slot->ctrl,
+			 "Disabling domain:bus:device=%04x:%02x:%02x\n",
+			 pci_domain_nr(p_slot->ctrl->pci_dev->subordinate),
+			 p_slot->bus, p_slot->device);
 		pciehp_disable_slot(p_slot);
 		mutex_lock(&p_slot->lock);
 		p_slot->state = STATIC_STATE;
@@ -412,12 +412,12 @@
 			p_slot->state = BLINKINGOFF_STATE;
 			ctrl_info(ctrl,
 				  "PCI slot #%s - powering off due to button "
-				  "press.\n", p_slot->name);
+				  "press.\n", slot_name(p_slot));
 		} else {
 			p_slot->state = BLINKINGON_STATE;
 			ctrl_info(ctrl,
 				  "PCI slot #%s - powering on due to button "
-				  "press.\n", p_slot->name);
+				  "press.\n", slot_name(p_slot));
 		}
 		/* blink green LED and turn off amber */
 		if (PWR_LED(ctrl))
@@ -434,8 +434,7 @@
 		 * press the attention again before the 5 sec. limit
 		 * expires to cancel hot-add or hot-remove
 		 */
-		ctrl_info(ctrl, "Button cancel on Slot(%s)\n", p_slot->name);
-		ctrl_dbg(ctrl, "%s: button cancel\n", __func__);
+		ctrl_info(ctrl, "Button cancel on Slot(%s)\n", slot_name(p_slot));
 		cancel_delayed_work(&p_slot->work);
 		if (p_slot->state == BLINKINGOFF_STATE) {
 			if (PWR_LED(ctrl))
@@ -447,7 +446,7 @@
 		if (ATTN_LED(ctrl))
 			p_slot->hpc_ops->set_attention_status(p_slot, 0);
 		ctrl_info(ctrl, "PCI slot #%s - action canceled "
-			  "due to button press\n", p_slot->name);
+			  "due to button press\n", slot_name(p_slot));
 		p_slot->state = STATIC_STATE;
 		break;
 	case POWEROFF_STATE:
@@ -457,7 +456,7 @@
 		 * this means that the previous attention button action
 		 * to hot-add or hot-remove is undergoing
 		 */
-		ctrl_info(ctrl, "Button ignore on Slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Button ignore on Slot(%s)\n", slot_name(p_slot));
 		update_slot_info(p_slot);
 		break;
 	default:
@@ -539,16 +538,15 @@
 
 	rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
 	if (rc || !getstatus) {
-		ctrl_info(ctrl, "%s: no adapter on slot(%s)\n",
-			  __func__, p_slot->name);
+		ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot));
 		mutex_unlock(&p_slot->ctrl->crit_sect);
 		return -ENODEV;
 	}
 	if (MRL_SENS(p_slot->ctrl)) {
 		rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
 		if (rc || getstatus) {
-			ctrl_info(ctrl, "%s: latch open on slot(%s)\n",
-				  __func__, p_slot->name);
+			ctrl_info(ctrl, "Latch open on slot(%s)\n",
+				  slot_name(p_slot));
 			mutex_unlock(&p_slot->ctrl->crit_sect);
 			return -ENODEV;
 		}
@@ -557,8 +555,8 @@
 	if (POWER_CTRL(p_slot->ctrl)) {
 		rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
 		if (rc || getstatus) {
-			ctrl_info(ctrl, "%s: already enabled on slot(%s)\n",
-				  __func__, p_slot->name);
+			ctrl_info(ctrl, "Already enabled on slot(%s)\n",
+				  slot_name(p_slot));
 			mutex_unlock(&p_slot->ctrl->crit_sect);
 			return -EINVAL;
 		}
@@ -593,8 +591,8 @@
 	if (!HP_SUPR_RM(p_slot->ctrl)) {
 		ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
 		if (ret || !getstatus) {
-			ctrl_info(ctrl, "%s: no adapter on slot(%s)\n",
-				  __func__, p_slot->name);
+			ctrl_info(ctrl, "No adapter on slot(%s)\n",
+				  slot_name(p_slot));
 			mutex_unlock(&p_slot->ctrl->crit_sect);
 			return -ENODEV;
 		}
@@ -603,8 +601,8 @@
 	if (MRL_SENS(p_slot->ctrl)) {
 		ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
 		if (ret || getstatus) {
-			ctrl_info(ctrl, "%s: latch open on slot(%s)\n",
-				  __func__, p_slot->name);
+			ctrl_info(ctrl, "Latch open on slot(%s)\n",
+				  slot_name(p_slot));
 			mutex_unlock(&p_slot->ctrl->crit_sect);
 			return -ENODEV;
 		}
@@ -613,8 +611,8 @@
 	if (POWER_CTRL(p_slot->ctrl)) {
 		ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
 		if (ret || !getstatus) {
-			ctrl_info(ctrl, "%s: already disabled slot(%s)\n",
-				  __func__, p_slot->name);
+			ctrl_info(ctrl, "Already disabled on slot(%s)\n",
+				  slot_name(p_slot));
 			mutex_unlock(&p_slot->ctrl->crit_sect);
 			return -EINVAL;
 		}
@@ -645,14 +643,16 @@
 		break;
 	case POWERON_STATE:
 		ctrl_info(ctrl, "Slot %s is already in powering on state\n",
-			  p_slot->name);
+			  slot_name(p_slot));
 		break;
 	case BLINKINGOFF_STATE:
 	case POWEROFF_STATE:
-		ctrl_info(ctrl, "Already enabled on slot %s\n", p_slot->name);
+		ctrl_info(ctrl, "Already enabled on slot %s\n",
+			  slot_name(p_slot));
 		break;
 	default:
-		ctrl_err(ctrl, "Not a valid state on slot %s\n", p_slot->name);
+		ctrl_err(ctrl, "Not a valid state on slot %s\n",
+			 slot_name(p_slot));
 		break;
 	}
 	mutex_unlock(&p_slot->lock);
@@ -678,14 +678,16 @@
 		break;
 	case POWEROFF_STATE:
 		ctrl_info(ctrl, "Slot %s is already in powering off state\n",
-			  p_slot->name);
+			  slot_name(p_slot));
 		break;
 	case BLINKINGON_STATE:
 	case POWERON_STATE:
-		ctrl_info(ctrl, "Already disabled on slot %s\n", p_slot->name);
+		ctrl_info(ctrl, "Already disabled on slot %s\n",
+			  slot_name(p_slot));
 		break;
 	default:
-		ctrl_err(ctrl, "Not a valid state on slot %s\n", p_slot->name);
+		ctrl_err(ctrl, "Not a valid state on slot %s\n",
+			 slot_name(p_slot));
 		break;
 	}
 	mutex_unlock(&p_slot->lock);
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 8e9530c..b643ca1 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -125,6 +125,7 @@
 /* Field definitions in Link Capabilities Register */
 #define MAX_LNK_SPEED		0x000F
 #define MAX_LNK_WIDTH		0x03F0
+#define LINK_ACTIVE_REPORTING	0x00100000
 
 /* Link Width Encoding */
 #define LNK_X1		0x01
@@ -141,6 +142,7 @@
 #define LNK_TRN_ERR	0x0400
 #define	LNK_TRN		0x0800
 #define SLOT_CLK_CONF	0x1000
+#define LINK_ACTIVE	0x2000
 
 /* Field definitions in Slot Capabilities Register */
 #define ATTN_BUTTN_PRSN	0x00000001
@@ -314,22 +316,19 @@
 			 * proceed forward to issue the next command according
 			 * to spec. Just print out the error message.
 			 */
-			ctrl_dbg(ctrl,
-				 "%s: CMD_COMPLETED not clear after 1 sec.\n",
-				 __func__);
+			ctrl_dbg(ctrl, "CMD_COMPLETED not clear after 1 sec\n");
 		} else if (!NO_CMD_CMPL(ctrl)) {
 			/*
 			 * This controller semms to notify of command completed
 			 * event even though it supports none of power
 			 * controller, attention led, power led and EMI.
 			 */
-			ctrl_dbg(ctrl, "%s: Unexpected CMD_COMPLETED. Need to "
-				 "wait for command completed event.\n",
-				 __func__);
+			ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Need to "
+				 "wait for command completed event.\n");
 			ctrl->no_cmd_complete = 0;
 		} else {
-			ctrl_dbg(ctrl, "%s: Unexpected CMD_COMPLETED. Maybe "
-				 "the controller is broken.\n", __func__);
+			ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Maybe "
+				 "the controller is broken.\n");
 		}
 	}
 
@@ -345,8 +344,7 @@
 	smp_mb();
 	retval = pciehp_writew(ctrl, SLOTCTRL, slot_ctrl);
 	if (retval)
-		ctrl_err(ctrl, "%s: Cannot write to SLOTCTRL register\n",
-			 __func__);
+		ctrl_err(ctrl, "Cannot write to SLOTCTRL register\n");
 
 	/*
 	 * Wait for command completion.
@@ -368,22 +366,62 @@
 	return retval;
 }
 
+static inline int check_link_active(struct controller *ctrl)
+{
+	u16 link_status;
+
+	if (pciehp_readw(ctrl, LNKSTATUS, &link_status))
+		return 0;
+	return !!(link_status & LINK_ACTIVE);
+}
+
+static void pcie_wait_link_active(struct controller *ctrl)
+{
+	int timeout = 1000;
+
+	if (check_link_active(ctrl))
+		return;
+	while (timeout > 0) {
+		msleep(10);
+		timeout -= 10;
+		if (check_link_active(ctrl))
+			return;
+	}
+	ctrl_dbg(ctrl, "Data Link Layer Link Active not set in 1000 msec\n");
+}
+
 static int hpc_check_lnk_status(struct controller *ctrl)
 {
 	u16 lnk_status;
 	int retval = 0;
 
+        /*
+         * Data Link Layer Link Active Reporting must be capable for
+         * hot-plug capable downstream port. But old controller might
+         * not implement it. In this case, we wait for 1000 ms.
+         */
+        if (ctrl->link_active_reporting){
+                /* Wait for Data Link Layer Link Active bit to be set */
+                pcie_wait_link_active(ctrl);
+                /*
+                 * We must wait for 100 ms after the Data Link Layer
+                 * Link Active bit reads 1b before initiating a
+                 * configuration access to the hot added device.
+                 */
+                msleep(100);
+        } else
+                msleep(1000);
+
 	retval = pciehp_readw(ctrl, LNKSTATUS, &lnk_status);
 	if (retval) {
-		ctrl_err(ctrl, "%s: Cannot read LNKSTATUS register\n",
-			 __func__);
+		ctrl_err(ctrl, "Cannot read LNKSTATUS register\n");
 		return retval;
 	}
 
 	ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status);
 	if ( (lnk_status & LNK_TRN) || (lnk_status & LNK_TRN_ERR) ||
 		!(lnk_status & NEG_LINK_WD)) {
-		ctrl_err(ctrl, "%s : Link Training Error occurs \n", __func__);
+		ctrl_err(ctrl, "Link Training Error occurs \n");
 		retval = -1;
 		return retval;
 	}
@@ -508,7 +546,7 @@
 
 	retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
 	if (retval) {
-		ctrl_err(ctrl, "%s: Cannot check for power fault\n", __func__);
+		ctrl_err(ctrl, "Cannot check for power fault\n");
 		return retval;
 	}
 	pwr_fault = (u8)((slot_status & PWR_FAULT_DETECTED) >> 1);
@@ -524,7 +562,7 @@
 
 	retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
 	if (retval) {
-		ctrl_err(ctrl, "%s : Cannot check EMI status\n", __func__);
+		ctrl_err(ctrl, "Cannot check EMI status\n");
 		return retval;
 	}
 	*status = (slot_status & EMI_STATE) >> EMI_STATUS_BIT;
@@ -654,8 +692,7 @@
 	retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
 
 	if (retval) {
-		ctrl_err(ctrl, "%s: Write %x command failed!\n",
-			 __func__, slot_cmd);
+		ctrl_err(ctrl, "Write %x command failed!\n", slot_cmd);
 		return -1;
 	}
 	ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n",
@@ -733,7 +770,7 @@
 
 	retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
 	if (retval) {
-		ctrl_err(ctrl, "%s: Write command failed!\n", __func__);
+		ctrl_err(ctrl, "Write command failed!\n");
 		retval = -1;
 		goto out;
 	}
@@ -1013,8 +1050,7 @@
 	       PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE;
 
 	if (pcie_write_cmd(ctrl, cmd, mask)) {
-		ctrl_err(ctrl, "%s: Cannot enable software notification\n",
-			 __func__);
+		ctrl_err(ctrl, "Cannot enable software notification\n");
 		return -1;
 	}
 	return 0;
@@ -1026,8 +1062,7 @@
 	mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | MRL_DETECT_ENABLE |
 	       PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE;
 	if (pcie_write_cmd(ctrl, 0, mask))
-		ctrl_warn(ctrl, "%s: Cannot disable software notification\n",
-			  __func__);
+		ctrl_warn(ctrl, "Cannot disable software notification\n");
 }
 
 static int pcie_init_notification(struct controller *ctrl)
@@ -1061,7 +1096,6 @@
 	slot->device = ctrl->slot_device_offset + slot->hp_slot;
 	slot->hpc_ops = ctrl->hpc_ops;
 	slot->number = ctrl->first_slot;
-	snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number);
 	mutex_init(&slot->lock);
 	INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work);
 	list_add(&slot->slot_list, &ctrl->slot_list);
@@ -1132,12 +1166,12 @@
 struct controller *pcie_init(struct pcie_device *dev)
 {
 	struct controller *ctrl;
-	u32 slot_cap;
+	u32 slot_cap, link_cap;
 	struct pci_dev *pdev = dev->port;
 
 	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
 	if (!ctrl) {
-		dev_err(&dev->device, "%s : out of memory\n", __func__);
+		dev_err(&dev->device, "%s: Out of memory\n", __func__);
 		goto abort;
 	}
 	INIT_LIST_HEAD(&ctrl->slot_list);
@@ -1146,13 +1180,12 @@
 	ctrl->pci_dev = pdev;
 	ctrl->cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP);
 	if (!ctrl->cap_base) {
-		ctrl_err(ctrl, "%s: Cannot find PCI Express capability\n",
-			 __func__);
-		goto abort;
+		ctrl_err(ctrl, "Cannot find PCI Express capability\n");
+		goto abort_ctrl;
 	}
 	if (pciehp_readl(ctrl, SLOTCAP, &slot_cap)) {
-		ctrl_err(ctrl, "%s: Cannot read SLOTCAP register\n", __func__);
-		goto abort;
+		ctrl_err(ctrl, "Cannot read SLOTCAP register\n");
+		goto abort_ctrl;
 	}
 
 	ctrl->slot_cap = slot_cap;
@@ -1174,6 +1207,16 @@
 	    !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl)))
 	    ctrl->no_cmd_complete = 1;
 
+        /* Check if Data Link Layer Link Active Reporting is implemented */
+        if (pciehp_readl(ctrl, LNKCAP, &link_cap)) {
+                ctrl_err(ctrl, "%s: Cannot read LNKCAP register\n", __func__);
+                goto abort_ctrl;
+        }
+        if (link_cap & LINK_ACTIVE_REPORTING) {
+                ctrl_dbg(ctrl, "Link Active Reporting supported\n");
+                ctrl->link_active_reporting = 1;
+        }
+
 	/* Clear all remaining event bits in Slot Status register */
 	if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f))
 		goto abort_ctrl;
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index ffd1114..10f9566 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -39,8 +39,7 @@
 	u16 pci_cmd, pci_bctl;
 
 	if (hpp->revision > 1) {
-		printk(KERN_WARNING "%s: Rev.%d type0 record not supported\n",
-		       __func__, hpp->revision);
+		warn("Rev.%d type0 record not supported\n", hpp->revision);
 		return;
 	}
 
@@ -81,8 +80,7 @@
 	u32 reg32;
 
 	if (hpp->revision > 1) {
-		printk(KERN_WARNING "%s: Rev.%d type2 record not supported\n",
-		       __func__, hpp->revision);
+		warn("Rev.%d type2 record not supported\n", hpp->revision);
 		return;
 	}
 
@@ -149,8 +147,7 @@
 		return;
 
 	if (pciehp_get_hp_params_from_firmware(dev, &hpp)) {
-		printk(KERN_WARNING "%s: Could not get hotplug parameters\n",
-		       __func__);
+		warn("Could not get hotplug parameters\n");
 		return;
 	}
 
@@ -202,9 +199,9 @@
 
 	dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
 	if (dev) {
-		ctrl_err(ctrl,
-			 "Device %s already exists at %x:%x, cannot hot-add\n",
-			 pci_name(dev), p_slot->bus, p_slot->device);
+		ctrl_err(ctrl, "Device %s already exists "
+			 "at %04x:%02x:%02x, cannot hot-add\n", pci_name(dev),
+			 pci_domain_nr(parent), p_slot->bus, p_slot->device);
 		pci_dev_put(dev);
 		return -EINVAL;
 	}
@@ -248,8 +245,8 @@
 	u16 command;
 	struct controller *ctrl = p_slot->ctrl;
 
-	ctrl_dbg(ctrl, "%s: bus/dev = %x/%x\n", __func__,
-		 p_slot->bus, p_slot->device);
+	ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:%02x\n",
+		 __func__, pci_domain_nr(parent), p_slot->bus, p_slot->device);
 	ret = p_slot->hpc_ops->get_adapter_status(p_slot, &presence);
 	if (ret)
 		presence = 0;
diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c
index 5088450..2ea9cf1 100644
--- a/drivers/pci/hotplug/rpaphp_slot.c
+++ b/drivers/pci/hotplug/rpaphp_slot.c
@@ -43,7 +43,7 @@
 void dealloc_slot_struct(struct slot *slot)
 {
 	kfree(slot->hotplug_slot->info);
-	kfree(slot->hotplug_slot->name);
+	kfree(slot->name);
 	kfree(slot->hotplug_slot);
 	kfree(slot);
 }
@@ -63,11 +63,9 @@
 					   GFP_KERNEL);
 	if (!slot->hotplug_slot->info)
 		goto error_hpslot;
-	slot->hotplug_slot->name = kmalloc(strlen(drc_name) + 1, GFP_KERNEL);
-	if (!slot->hotplug_slot->name)
+	slot->name = kstrdup(drc_name, GFP_KERNEL);
+	if (!slot->name)
 		goto error_info;	
-	slot->name = slot->hotplug_slot->name;
-	strcpy(slot->name, drc_name);
 	slot->dn = dn;
 	slot->index = drc_index;
 	slot->power_domain = power_domain;
@@ -137,7 +135,7 @@
 		slotno = PCI_SLOT(PCI_DN(slot->dn->child)->devfn);
 	else
 		slotno = -1;
-	retval = pci_hp_register(php_slot, slot->bus, slotno);
+	retval = pci_hp_register(php_slot, slot->bus, slotno, slot->name);
 	if (retval) {
 		err("pci_hp_register failed with error %d\n", retval);
 		return retval;
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index 410fe03..3eee709 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -161,7 +161,8 @@
 }
 
 static int sn_hp_slot_private_alloc(struct hotplug_slot *bss_hotplug_slot,
-				    struct pci_bus *pci_bus, int device)
+				    struct pci_bus *pci_bus, int device,
+				    char *name)
 {
 	struct pcibus_info *pcibus_info;
 	struct slot *slot;
@@ -173,15 +174,9 @@
 		return -ENOMEM;
 	bss_hotplug_slot->private = slot;
 
-	bss_hotplug_slot->name = kmalloc(SN_SLOT_NAME_SIZE, GFP_KERNEL);
-	if (!bss_hotplug_slot->name) {
-		kfree(bss_hotplug_slot->private);
-		return -ENOMEM;
-	}
-
 	slot->device_num = device;
 	slot->pci_bus = pci_bus;
-	sprintf(bss_hotplug_slot->name, "%04x:%02x:%02x",
+	sprintf(name, "%04x:%02x:%02x",
 		pci_domain_nr(pci_bus),
 		((u16)pcibus_info->pbi_buscommon.bs_persist_busnum),
 		device + 1);
@@ -418,7 +413,7 @@
 	/*
 	 * Add the slot's devices to the ACPI infrastructure */
 	if (SN_ACPI_BASE_SUPPORT() && ssdt) {
-		unsigned long adr;
+		unsigned long long adr;
 		struct acpi_device *pdevice;
 		struct acpi_device *device;
 		acpi_handle phandle;
@@ -510,7 +505,7 @@
 	/* free the ACPI resources for the slot */
 	if (SN_ACPI_BASE_SUPPORT() &&
             PCI_CONTROLLER(slot->pci_bus)->acpi_handle) {
-		unsigned long adr;
+		unsigned long long adr;
 		struct acpi_device *device;
 		acpi_handle phandle;
 		acpi_handle chandle = NULL;
@@ -608,7 +603,6 @@
 static void sn_release_slot(struct hotplug_slot *bss_hotplug_slot)
 {
 	kfree(bss_hotplug_slot->info);
-	kfree(bss_hotplug_slot->name);
 	kfree(bss_hotplug_slot->private);
 	kfree(bss_hotplug_slot);
 }
@@ -618,6 +612,7 @@
 	int device;
 	struct pci_slot *pci_slot;
 	struct hotplug_slot *bss_hotplug_slot;
+	char name[SN_SLOT_NAME_SIZE];
 	int rc = 0;
 
 	/*
@@ -645,15 +640,14 @@
 		}
 
 		if (sn_hp_slot_private_alloc(bss_hotplug_slot,
-					     pci_bus, device)) {
+					     pci_bus, device, name)) {
 			rc = -ENOMEM;
 			goto alloc_err;
 		}
-
 		bss_hotplug_slot->ops = &sn_hotplug_slot_ops;
 		bss_hotplug_slot->release = &sn_release_slot;
 
-		rc = pci_hp_register(bss_hotplug_slot, pci_bus, device);
+		rc = pci_hp_register(bss_hotplug_slot, pci_bus, device, name);
 		if (rc)
 			goto register_err;
 
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index 8a026f7..6aba0b6 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -59,6 +59,20 @@
 #define warn(format, arg...)						\
 	printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
 
+#define ctrl_dbg(ctrl, format, arg...)					\
+	do {								\
+		if (shpchp_debug)					\
+			dev_printk(, &ctrl->pci_dev->dev,		\
+					format, ## arg);		\
+	} while (0)
+#define ctrl_err(ctrl, format, arg...)					\
+	dev_err(&ctrl->pci_dev->dev, format, ## arg)
+#define ctrl_info(ctrl, format, arg...)					\
+	dev_info(&ctrl->pci_dev->dev, format, ## arg)
+#define ctrl_warn(ctrl, format, arg...)					\
+	dev_warn(&ctrl->pci_dev->dev, format, ## arg)
+
+
 #define SLOT_NAME_SIZE 10
 struct slot {
 	u8 bus;
@@ -69,15 +83,13 @@
 	u8 state;
 	u8 presence_save;
 	u8 pwr_save;
-	struct timer_list task_event;
-	u8 hp_slot;
 	struct controller *ctrl;
 	struct hpc_ops *hpc_ops;
 	struct hotplug_slot *hotplug_slot;
 	struct list_head	slot_list;
-	char name[SLOT_NAME_SIZE];
 	struct delayed_work work;	/* work for button event */
 	struct mutex lock;
+	u8 hp_slot;
 };
 
 struct event_info {
@@ -169,6 +181,11 @@
 extern void shpchp_queue_pushbutton_work(struct work_struct *work);
 extern int shpc_init( struct controller *ctrl, struct pci_dev *pdev);
 
+static inline const char *slot_name(struct slot *slot)
+{
+	return hotplug_slot_name(slot->hotplug_slot);
+}
+
 #ifdef CONFIG_ACPI
 #include <linux/pci-acpi.h>
 static inline int get_hp_params_from_firmware(struct pci_dev *dev,
@@ -236,7 +253,7 @@
 			return slot;
 	}
 
-	err("%s: slot (device=0x%x) not found\n", __func__, device);
+	ctrl_err(ctrl, "Slot (device=0x%02x) not found\n", device);
 	return NULL;
 }
 
@@ -270,7 +287,9 @@
 	pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, &pcix_bridge_errors_reg);
 	perr_set = pcix_bridge_errors_reg & PERR_OBSERVED_MASK;
 	if (perr_set) {
-		dbg ("%s  W1C: Bridge_Errors[ PERR_OBSERVED = %08X]\n",__func__ , perr_set);
+		ctrl_dbg(p_slot->ctrl,
+			 "Bridge_Errors[ PERR_OBSERVED = %08X] (W1C)\n",
+			 perr_set);
 
 		pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, perr_set);
 	}
@@ -279,7 +298,7 @@
 	pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, &pcix_mem_base_reg);
 	rse_set = pcix_mem_base_reg & RSE_MASK;
 	if (rse_set) {
-		dbg ("%s  W1C: Memory_Base_Limit[ RSE ]\n",__func__ );
+		ctrl_dbg(p_slot->ctrl, "Memory_Base_Limit[ RSE ] (W1C)\n");
 
 		pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, rse_set);
 	}
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index cc38615..fe8d149 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -89,7 +89,8 @@
 {
 	struct slot *slot = hotplug_slot->private;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	kfree(slot->hotplug_slot->info);
 	kfree(slot->hotplug_slot);
@@ -101,8 +102,9 @@
 	struct slot *slot;
 	struct hotplug_slot *hotplug_slot;
 	struct hotplug_slot_info *info;
+	char name[SLOT_NAME_SIZE];
 	int retval = -ENOMEM;
-	int i, len, dup = 1;
+	int i;
 
 	for (i = 0; i < ctrl->num_slots; i++) {
 		slot = kzalloc(sizeof(*slot), GFP_KERNEL);
@@ -119,8 +121,6 @@
 			goto error_hpslot;
 		hotplug_slot->info = info;
 
-		hotplug_slot->name = slot->name;
-
 		slot->hp_slot = i;
 		slot->ctrl = ctrl;
 		slot->bus = ctrl->pci_dev->subordinate->number;
@@ -133,37 +133,27 @@
 		/* register this slot with the hotplug pci core */
 		hotplug_slot->private = slot;
 		hotplug_slot->release = &release_slot;
-		snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number);
+		snprintf(name, SLOT_NAME_SIZE, "%d", slot->number);
 		hotplug_slot->ops = &shpchp_hotplug_slot_ops;
 
+ 		ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:%02x "
+ 			 "hp_slot=%x sun=%x slot_device_offset=%x\n",
+ 			 pci_domain_nr(ctrl->pci_dev->subordinate),
+ 			 slot->bus, slot->device, slot->hp_slot, slot->number,
+ 			 ctrl->slot_device_offset);
+		retval = pci_hp_register(slot->hotplug_slot,
+				ctrl->pci_dev->subordinate, slot->device, name);
+		if (retval) {
+			ctrl_err(ctrl, "pci_hp_register failed with error %d\n",
+				 retval);
+			goto error_info;
+		}
+
 		get_power_status(hotplug_slot, &info->power_status);
 		get_attention_status(hotplug_slot, &info->attention_status);
 		get_latch_status(hotplug_slot, &info->latch_status);
 		get_adapter_status(hotplug_slot, &info->adapter_status);
 
-		dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
-		    "slot_device_offset=%x\n", slot->bus, slot->device,
-		    slot->hp_slot, slot->number, ctrl->slot_device_offset);
-duplicate_name:
-		retval = pci_hp_register(slot->hotplug_slot,
-				ctrl->pci_dev->subordinate, slot->device);
-		if (retval) {
-			/*
-			 * If slot N already exists, we'll try to create
-			 * slot N-1, N-2 ... N-M, until we overflow.
-			 */
-			if (retval == -EEXIST) {
-				len = snprintf(slot->name, SLOT_NAME_SIZE,
-					       "%d-%d", slot->number, dup++);
-				if (len < SLOT_NAME_SIZE)
-					goto duplicate_name;
-				else
-					err("duplicate slot name overflow\n");
-			}
-			err("pci_hp_register failed with error %d\n", retval);
-			goto error_info;
-		}
-
 		list_add(&slot->slot_list, &ctrl->slot_list);
 	}
 
@@ -201,7 +191,8 @@
 {
 	struct slot *slot = get_slot(hotplug_slot);
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	hotplug_slot->info->attention_status = status;
 	slot->hpc_ops->set_attention_status(slot, status);
@@ -213,7 +204,8 @@
 {
 	struct slot *slot = get_slot(hotplug_slot);
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	return shpchp_sysfs_enable_slot(slot);
 }
@@ -222,7 +214,8 @@
 {
 	struct slot *slot = get_slot(hotplug_slot);
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	return shpchp_sysfs_disable_slot(slot);
 }
@@ -232,7 +225,8 @@
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_power_status(slot, value);
 	if (retval < 0)
@@ -246,7 +240,8 @@
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_attention_status(slot, value);
 	if (retval < 0)
@@ -260,7 +255,8 @@
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_latch_status(slot, value);
 	if (retval < 0)
@@ -274,7 +270,8 @@
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_adapter_status(slot, value);
 	if (retval < 0)
@@ -289,7 +286,8 @@
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_max_bus_speed(slot, value);
 	if (retval < 0)
@@ -303,7 +301,8 @@
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_cur_bus_speed(slot, value);
 	if (retval < 0)
@@ -334,15 +333,14 @@
 
 	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
 	if (!ctrl) {
-		err("%s : out of memory\n", __func__);
+		dev_err(&pdev->dev, "%s: Out of memory\n", __func__);
 		goto err_out_none;
 	}
 	INIT_LIST_HEAD(&ctrl->slot_list);
 
 	rc = shpc_init(ctrl, pdev);
 	if (rc) {
-		dbg("%s: controller initialization failed\n",
-		    SHPC_MODULE_NAME);
+		ctrl_dbg(ctrl, "Controller initialization failed\n");
 		goto err_out_free_ctrl;
 	}
 
@@ -351,7 +349,7 @@
 	/* Setup the slot information structures */
 	rc = init_slots(ctrl);
 	if (rc) {
-		err("%s: slot initialization failed\n", SHPC_MODULE_NAME);
+		ctrl_err(ctrl, "Slot initialization failed\n");
 		goto err_out_release_ctlr;
 	}
 
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index dfb5393..b8ab279 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -62,7 +62,7 @@
 	u32 event_type;
 
 	/* Attention Button Change */
-	dbg("shpchp:  Attention button interrupt received.\n");
+	ctrl_dbg(ctrl, "Attention button interrupt received\n");
 
 	p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 	p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
@@ -70,7 +70,7 @@
 	/*
 	 *  Button pressed - See if need to TAKE ACTION!!!
 	 */
-	info("Button pressed on Slot(%s)\n", p_slot->name);
+	ctrl_info(ctrl, "Button pressed on Slot(%s)\n", slot_name(p_slot));
 	event_type = INT_BUTTON_PRESS;
 
 	queue_interrupt_event(p_slot, event_type);
@@ -86,29 +86,29 @@
 	u32 event_type;
 
 	/* Switch Change */
-	dbg("shpchp:  Switch interrupt received.\n");
+	ctrl_dbg(ctrl, "Switch interrupt received\n");
 
 	p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 	p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
 	p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
-	dbg("%s: Card present %x Power status %x\n", __func__,
-		p_slot->presence_save, p_slot->pwr_save);
+	ctrl_dbg(ctrl, "Card present %x Power status %x\n",
+		 p_slot->presence_save, p_slot->pwr_save);
 
 	if (getstatus) {
 		/*
 		 * Switch opened
 		 */
-		info("Latch open on Slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Latch open on Slot(%s)\n", slot_name(p_slot));
 		event_type = INT_SWITCH_OPEN;
 		if (p_slot->pwr_save && p_slot->presence_save) {
 			event_type = INT_POWER_FAULT;
-			err("Surprise Removal of card\n");
+			ctrl_err(ctrl, "Surprise Removal of card\n");
 		}
 	} else {
 		/*
 		 *  Switch closed
 		 */
-		info("Latch close on Slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Latch close on Slot(%s)\n", slot_name(p_slot));
 		event_type = INT_SWITCH_CLOSE;
 	}
 
@@ -123,7 +123,7 @@
 	u32 event_type;
 
 	/* Presence Change */
-	dbg("shpchp:  Presence/Notify input change.\n");
+	ctrl_dbg(ctrl, "Presence/Notify input change\n");
 
 	p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
@@ -135,13 +135,15 @@
 		/*
 		 * Card Present
 		 */
-		info("Card present on Slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Card present on Slot(%s)\n",
+			  slot_name(p_slot));
 		event_type = INT_PRESENCE_ON;
 	} else {
 		/*
 		 * Not Present
 		 */
-		info("Card not present on Slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Card not present on Slot(%s)\n",
+			  slot_name(p_slot));
 		event_type = INT_PRESENCE_OFF;
 	}
 
@@ -156,7 +158,7 @@
 	u32 event_type;
 
 	/* Power fault */
-	dbg("shpchp:  Power fault interrupt received.\n");
+	ctrl_dbg(ctrl, "Power fault interrupt received\n");
 
 	p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
@@ -164,18 +166,19 @@
 		/*
 		 * Power fault Cleared
 		 */
-		info("Power fault cleared on Slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Power fault cleared on Slot(%s)\n",
+			  slot_name(p_slot));
 		p_slot->status = 0x00;
 		event_type = INT_POWER_FAULT_CLEAR;
 	} else {
 		/*
 		 *   Power fault
 		 */
-		info("Power fault on Slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Power fault on Slot(%s)\n", slot_name(p_slot));
 		event_type = INT_POWER_FAULT;
 		/* set power fault status for this board */
 		p_slot->status = 0xFF;
-		info("power fault bit %x set\n", hp_slot);
+		ctrl_info(ctrl, "Power fault bit %x set\n", hp_slot);
 	}
 
 	queue_interrupt_event(p_slot, event_type);
@@ -191,10 +194,10 @@
 {
 	int rc = 0;
 
-	dbg("%s: change to speed %d\n", __func__, speed);
+	ctrl_dbg(ctrl, "Change speed to %d\n", speed);
 	if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) {
-		err("%s: Issue of set bus speed mode command failed\n",
-		    __func__);
+		ctrl_err(ctrl, "%s: Issue of set bus speed mode command "
+			 "failed\n", __func__);
 		return WRONG_BUS_FREQUENCY;
 	}
 	return rc;
@@ -212,8 +215,8 @@
 	 */
 	if (flag) {
 		if (asp < bsp) {
-			err("%s: speed of bus %x and adapter %x mismatch\n",
-			    __func__, bsp, asp);
+			ctrl_err(ctrl, "Speed of bus %x and adapter %x "
+				 "mismatch\n", bsp, asp);
 			rc = WRONG_BUS_FREQUENCY;
 		}
 		return rc;
@@ -243,17 +246,18 @@
 	int rc = 0;
 	enum pci_bus_speed asp, bsp, msp;
 	struct controller *ctrl = p_slot->ctrl;
+	struct pci_bus *parent = ctrl->pci_dev->subordinate;
 
 	hp_slot = p_slot->device - ctrl->slot_device_offset;
 
-	dbg("%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n",
-			__func__, p_slot->device,
-			ctrl->slot_device_offset, hp_slot);
+	ctrl_dbg(ctrl,
+		 "%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n",
+		 __func__, p_slot->device, ctrl->slot_device_offset, hp_slot);
 
 	/* Power on slot without connecting to bus */
 	rc = p_slot->hpc_ops->power_on_slot(p_slot);
 	if (rc) {
-		err("%s: Failed to power on slot\n", __func__);
+		ctrl_err(ctrl, "Failed to power on slot\n");
 		return -1;
 	}
 
@@ -262,33 +266,34 @@
 			return WRONG_BUS_FREQUENCY;
 
 		if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) {
-			err("%s: Issue of set bus speed mode command failed\n", __func__);
+			ctrl_err(ctrl, "%s: Issue of set bus speed mode command"
+				 " failed\n", __func__);
 			return WRONG_BUS_FREQUENCY;
 		}
 
 		/* turn on board, blink green LED, turn off Amber LED */
 		if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
-			err("%s: Issue of Slot Enable command failed\n", __func__);
+			ctrl_err(ctrl, "Issue of Slot Enable command failed\n");
 			return rc;
 		}
 	}
 
 	rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp);
 	if (rc) {
-		err("%s: Can't get adapter speed or bus mode mismatch\n",
-		    __func__);
+		ctrl_err(ctrl, "Can't get adapter speed or "
+			 "bus mode mismatch\n");
 		return WRONG_BUS_FREQUENCY;
 	}
 
 	rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp);
 	if (rc) {
-		err("%s: Can't get bus operation speed\n", __func__);
+		ctrl_err(ctrl, "Can't get bus operation speed\n");
 		return WRONG_BUS_FREQUENCY;
 	}
 
 	rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp);
 	if (rc) {
-		err("%s: Can't get max bus operation speed\n", __func__);
+		ctrl_err(ctrl, "Can't get max bus operation speed\n");
 		msp = bsp;
 	}
 
@@ -296,9 +301,9 @@
 	if (!list_empty(&ctrl->pci_dev->subordinate->devices))
 		slots_not_empty = 1;
 
-	dbg("%s: slots_not_empty %d, adapter_speed %d, bus_speed %d, "
-	    "max_bus_speed %d\n", __func__, slots_not_empty, asp,
-	    bsp, msp);
+	ctrl_dbg(ctrl, "%s: slots_not_empty %d, adapter_speed %d, bus_speed %d,"
+		 " max_bus_speed %d\n", __func__, slots_not_empty, asp,
+		 bsp, msp);
 
 	rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, asp, bsp, msp);
 	if (rc)
@@ -306,26 +311,26 @@
 
 	/* turn on board, blink green LED, turn off Amber LED */
 	if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
-		err("%s: Issue of Slot Enable command failed\n", __func__);
+		ctrl_err(ctrl, "Issue of Slot Enable command failed\n");
 		return rc;
 	}
 
 	/* Wait for ~1 second */
 	msleep(1000);
 
-	dbg("%s: slot status = %x\n", __func__, p_slot->status);
+	ctrl_dbg(ctrl, "%s: slot status = %x\n", __func__, p_slot->status);
 	/* Check for a power fault */
 	if (p_slot->status == 0xFF) {
 		/* power fault occurred, but it was benign */
-		dbg("%s: power fault\n", __func__);
+		ctrl_dbg(ctrl, "%s: Power fault\n", __func__);
 		rc = POWER_FAILURE;
 		p_slot->status = 0;
 		goto err_exit;
 	}
 
 	if (shpchp_configure_device(p_slot)) {
-		err("Cannot add device at 0x%x:0x%x\n", p_slot->bus,
-				p_slot->device);
+		ctrl_err(ctrl, "Cannot add device at %04x:%02x:%02x\n",
+			 pci_domain_nr(parent), p_slot->bus, p_slot->device);
 		goto err_exit;
 	}
 
@@ -341,7 +346,8 @@
 	/* turn off slot, turn on Amber LED, turn off Green LED */
 	rc = p_slot->hpc_ops->slot_disable(p_slot);
 	if (rc) {
-		err("%s: Issue of Slot Disable command failed\n", __func__);
+		ctrl_err(ctrl, "%s: Issue of Slot Disable command failed\n",
+			 __func__);
 		return rc;
 	}
 
@@ -365,7 +371,7 @@
 	hp_slot = p_slot->device - ctrl->slot_device_offset;
 	p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
-	dbg("In %s, hp_slot = %d\n", __func__, hp_slot);
+	ctrl_dbg(ctrl, "%s: hp_slot = %d\n", __func__, hp_slot);
 
 	/* Change status to shutdown */
 	if (p_slot->is_a_board)
@@ -374,13 +380,14 @@
 	/* turn off slot, turn on Amber LED, turn off Green LED */
 	rc = p_slot->hpc_ops->slot_disable(p_slot);
 	if (rc) {
-		err("%s: Issue of Slot Disable command failed\n", __func__);
+		ctrl_err(ctrl, "%s: Issue of Slot Disable command failed\n",
+			 __func__);
 		return rc;
 	}
 
 	rc = p_slot->hpc_ops->set_attention_status(p_slot, 0);
 	if (rc) {
-		err("%s: Issue of Set Attention command failed\n", __func__);
+		ctrl_err(ctrl, "Issue of Set Attention command failed\n");
 		return rc;
 	}
 
@@ -439,7 +446,8 @@
 
 	info = kmalloc(sizeof(*info), GFP_KERNEL);
 	if (!info) {
-		err("%s: Cannot allocate memory\n", __func__);
+		ctrl_err(p_slot->ctrl, "%s: Cannot allocate memory\n",
+			 __func__);
 		return;
 	}
 	info->p_slot = p_slot;
@@ -486,18 +494,19 @@
 static void handle_button_press_event(struct slot *p_slot)
 {
 	u8 getstatus;
+	struct controller *ctrl = p_slot->ctrl;
 
 	switch (p_slot->state) {
 	case STATIC_STATE:
 		p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
 		if (getstatus) {
 			p_slot->state = BLINKINGOFF_STATE;
-			info("PCI slot #%s - powering off due to button "
-			     "press.\n", p_slot->name);
+			ctrl_info(ctrl, "PCI slot #%s - powering off due to "
+				  "button press.\n", slot_name(p_slot));
 		} else {
 			p_slot->state = BLINKINGON_STATE;
-			info("PCI slot #%s - powering on due to button "
-			     "press.\n", p_slot->name);
+			ctrl_info(ctrl, "PCI slot #%s - powering on due to "
+				  "button press.\n", slot_name(p_slot));
 		}
 		/* blink green LED and turn off amber */
 		p_slot->hpc_ops->green_led_blink(p_slot);
@@ -512,16 +521,16 @@
 		 * press the attention again before the 5 sec. limit
 		 * expires to cancel hot-add or hot-remove
 		 */
-		info("Button cancel on Slot(%s)\n", p_slot->name);
-		dbg("%s: button cancel\n", __func__);
+		ctrl_info(ctrl, "Button cancel on Slot(%s)\n",
+			  slot_name(p_slot));
 		cancel_delayed_work(&p_slot->work);
 		if (p_slot->state == BLINKINGOFF_STATE)
 			p_slot->hpc_ops->green_led_on(p_slot);
 		else
 			p_slot->hpc_ops->green_led_off(p_slot);
 		p_slot->hpc_ops->set_attention_status(p_slot, 0);
-		info("PCI slot #%s - action canceled due to button press\n",
-		     p_slot->name);
+		ctrl_info(ctrl, "PCI slot #%s - action canceled due to "
+			  "button press\n", slot_name(p_slot));
 		p_slot->state = STATIC_STATE;
 		break;
 	case POWEROFF_STATE:
@@ -531,11 +540,12 @@
 		 * this means that the previous attention button action
 		 * to hot-add or hot-remove is undergoing
 		 */
-		info("Button ignore on Slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Button ignore on Slot(%s)\n",
+			  slot_name(p_slot));
 		update_slot_info(p_slot);
 		break;
 	default:
-		warn("Not a valid state\n");
+		ctrl_warn(ctrl, "Not a valid state\n");
 		break;
 	}
 }
@@ -551,7 +561,7 @@
 		handle_button_press_event(p_slot);
 		break;
 	case INT_POWER_FAULT:
-		dbg("%s: power fault\n", __func__);
+		ctrl_dbg(p_slot->ctrl, "%s: Power fault\n", __func__);
 		p_slot->hpc_ops->set_attention_status(p_slot, 1);
 		p_slot->hpc_ops->green_led_off(p_slot);
 		break;
@@ -569,22 +579,24 @@
 {
 	u8 getstatus = 0;
 	int rc, retval = -ENODEV;
+	struct controller *ctrl = p_slot->ctrl;
 
 	/* Check to see if (latch closed, card present, power off) */
 	mutex_lock(&p_slot->ctrl->crit_sect);
 	rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
 	if (rc || !getstatus) {
-		info("No adapter on slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot));
 		goto out;
 	}
 	rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
 	if (rc || getstatus) {
-		info("Latch open on slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Latch open on slot(%s)\n", slot_name(p_slot));
 		goto out;
 	}
 	rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
 	if (rc || getstatus) {
-		info("Already enabled on slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Already enabled on slot(%s)\n",
+			  slot_name(p_slot));
 		goto out;
 	}
 
@@ -593,7 +605,7 @@
 	/* We have to save the presence info for these slots */
 	p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
 	p_slot->hpc_ops->get_power_status(p_slot, &(p_slot->pwr_save));
-	dbg("%s: p_slot->pwr_save %x\n", __func__, p_slot->pwr_save);
+	ctrl_dbg(ctrl, "%s: p_slot->pwr_save %x\n", __func__, p_slot->pwr_save);
 	p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
 
 	if(((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD) ||
@@ -624,6 +636,7 @@
 {
 	u8 getstatus = 0;
 	int rc, retval = -ENODEV;
+	struct controller *ctrl = p_slot->ctrl;
 
 	if (!p_slot->ctrl)
 		return -ENODEV;
@@ -633,17 +646,18 @@
 
 	rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
 	if (rc || !getstatus) {
-		info("No adapter on slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot));
 		goto out;
 	}
 	rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
 	if (rc || getstatus) {
-		info("Latch open on slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Latch open on slot(%s)\n", slot_name(p_slot));
 		goto out;
 	}
 	rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
 	if (rc || !getstatus) {
-		info("Already disabled slot(%s)\n", p_slot->name);
+		ctrl_info(ctrl, "Already disabled on slot(%s)\n",
+			  slot_name(p_slot));
 		goto out;
 	}
 
@@ -657,6 +671,7 @@
 int shpchp_sysfs_enable_slot(struct slot *p_slot)
 {
 	int retval = -ENODEV;
+	struct controller *ctrl = p_slot->ctrl;
 
 	mutex_lock(&p_slot->lock);
 	switch (p_slot->state) {
@@ -670,15 +685,17 @@
 		p_slot->state = STATIC_STATE;
 		break;
 	case POWERON_STATE:
-		info("Slot %s is already in powering on state\n",
-		     p_slot->name);
+		ctrl_info(ctrl, "Slot %s is already in powering on state\n",
+			  slot_name(p_slot));
 		break;
 	case BLINKINGOFF_STATE:
 	case POWEROFF_STATE:
-		info("Already enabled on slot %s\n", p_slot->name);
+		ctrl_info(ctrl, "Already enabled on slot %s\n",
+			  slot_name(p_slot));
 		break;
 	default:
-		err("Not a valid state on slot %s\n", p_slot->name);
+		ctrl_err(ctrl, "Not a valid state on slot %s\n",
+			 slot_name(p_slot));
 		break;
 	}
 	mutex_unlock(&p_slot->lock);
@@ -689,6 +706,7 @@
 int shpchp_sysfs_disable_slot(struct slot *p_slot)
 {
 	int retval = -ENODEV;
+	struct controller *ctrl = p_slot->ctrl;
 
 	mutex_lock(&p_slot->lock);
 	switch (p_slot->state) {
@@ -702,15 +720,17 @@
 		p_slot->state = STATIC_STATE;
 		break;
 	case POWEROFF_STATE:
-		info("Slot %s is already in powering off state\n",
-		     p_slot->name);
+		ctrl_info(ctrl, "Slot %s is already in powering off state\n",
+			  slot_name(p_slot));
 		break;
 	case BLINKINGON_STATE:
 	case POWERON_STATE:
-		info("Already disabled on slot %s\n", p_slot->name);
+		ctrl_info(ctrl, "Already disabled on slot %s\n",
+			  slot_name(p_slot));
 		break;
 	default:
-		err("Not a valid state on slot %s\n", p_slot->name);
+		ctrl_err(ctrl, "Not a valid state on slot %s\n",
+			 slot_name(p_slot));
 		break;
 	}
 	mutex_unlock(&p_slot->lock);
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 7a0bff3..86dc398 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -300,10 +300,10 @@
 						!is_ctrl_busy(ctrl), timeout);
 	if (!rc && is_ctrl_busy(ctrl)) {
 		retval = -EIO;
-		err("Command not completed in 1000 msec\n");
+		ctrl_err(ctrl, "Command not completed in 1000 msec\n");
 	} else if (rc < 0) {
 		retval = -EINTR;
-		info("Command was interrupted by a signal\n");
+		ctrl_info(ctrl, "Command was interrupted by a signal\n");
 	}
 
 	return retval;
@@ -320,15 +320,14 @@
 
 	if (!shpc_poll_ctrl_busy(ctrl)) {
 		/* After 1 sec and and the controller is still busy */
-		err("%s : Controller is still busy after 1 sec.\n",
-		    __func__);
+		ctrl_err(ctrl, "Controller is still busy after 1 sec\n");
 		retval = -EBUSY;
 		goto out;
 	}
 
 	++t_slot;
 	temp_word =  (t_slot << 8) | (cmd & 0xFF);
-	dbg("%s: t_slot %x cmd %x\n", __func__, t_slot, cmd);
+	ctrl_dbg(ctrl, "%s: t_slot %x cmd %x\n", __func__, t_slot, cmd);
 
 	/* To make sure the Controller Busy bit is 0 before we send out the
 	 * command.
@@ -344,8 +343,9 @@
 
 	cmd_status = hpc_check_cmd_status(slot->ctrl);
 	if (cmd_status) {
-		err("%s: Failed to issued command 0x%x (error code = %d)\n",
-		    __func__, cmd, cmd_status);
+		ctrl_err(ctrl,
+			 "Failed to issued command 0x%x (error code = %d)\n",
+			 cmd, cmd_status);
 		retval = -EIO;
 	}
  out:
@@ -364,15 +364,15 @@
 		break;
 	case 1:
 		retval = SWITCH_OPEN;
-		err("%s: Switch opened!\n", __func__);
+		ctrl_err(ctrl, "Switch opened!\n");
 		break;
 	case 2:
 		retval = INVALID_CMD;
-		err("%s: Invalid HPC command!\n", __func__);
+		ctrl_err(ctrl, "Invalid HPC command!\n");
 		break;
 	case 4:
 		retval = INVALID_SPEED_MODE;
-		err("%s: Invalid bus speed/mode!\n", __func__);
+		ctrl_err(ctrl, "Invalid bus speed/mode!\n");
 		break;
 	default:
 		retval = cmd_status;
@@ -483,8 +483,8 @@
 		return -ENODEV;
 	}
 
-	dbg("%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n",
-	    __func__, slot_reg, pcix_cap, m66_cap);
+	ctrl_dbg(ctrl, "%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n",
+		 __func__, slot_reg, pcix_cap, m66_cap);
 
 	switch (pcix_cap) {
 	case 0x0:
@@ -509,7 +509,7 @@
 		break;
 	}
 
-	dbg("Adapter speed = %d\n", *value);
+	ctrl_dbg(ctrl, "Adapter speed = %d\n", *value);
 	return retval;
 }
 
@@ -526,7 +526,7 @@
 		retval = -1;
 	}
 
-	dbg("Mode 1 ECC cap = %d\n", *mode);
+	ctrl_dbg(ctrl, "Mode 1 ECC cap = %d\n", *mode);
 	return retval;
 }
 
@@ -629,7 +629,7 @@
 
 	retval = shpc_write_cmd(slot, slot->hp_slot, SET_SLOT_PWR);
 	if (retval)
-		err("%s: Write command failed!\n", __func__);
+		ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__);
 
 	return retval;
 }
@@ -642,7 +642,7 @@
 	retval = shpc_write_cmd(slot, slot->hp_slot,
 			SET_SLOT_ENABLE | SET_PWR_BLINK | SET_ATTN_OFF);
 	if (retval)
-		err("%s: Write command failed!\n", __func__);
+		ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__);
 
 	return retval;
 }
@@ -655,7 +655,7 @@
 	retval = shpc_write_cmd(slot, slot->hp_slot,
 			SET_SLOT_DISABLE | SET_PWR_OFF | SET_ATTN_ON);
 	if (retval)
-		err("%s: Write command failed!\n", __func__);
+		ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__);
 
 	return retval;
 }
@@ -719,7 +719,7 @@
 
 	retval = shpc_write_cmd(slot, 0, cmd);
 	if (retval)
-		err("%s: Write command failed!\n", __func__);
+		ctrl_err(ctrl, "%s: Write command failed!\n", __func__);
 
 	return retval;
 }
@@ -735,7 +735,7 @@
 	if (!intr_loc)
 		return IRQ_NONE;
 
-	dbg("%s: intr_loc = %x\n",__func__, intr_loc);
+	ctrl_dbg(ctrl, "%s: intr_loc = %x\n", __func__, intr_loc);
 
 	if(!shpchp_poll_mode) {
 		/*
@@ -748,7 +748,7 @@
 		shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
 
 		intr_loc2 = shpc_readl(ctrl, INTR_LOC);
-		dbg("%s: intr_loc2 = %x\n",__func__, intr_loc2);
+		ctrl_dbg(ctrl, "%s: intr_loc2 = %x\n", __func__, intr_loc2);
 	}
 
 	if (intr_loc & CMD_INTR_PENDING) {
@@ -773,8 +773,8 @@
 			continue;
 
 		slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
-		dbg("%s: Slot %x with intr, slot register = %x\n",
-		    __func__, hp_slot, slot_reg);
+		ctrl_dbg(ctrl, "Slot %x with intr, slot register = %x\n",
+			 hp_slot, slot_reg);
 
 		if (slot_reg & MRL_CHANGE_DETECTED)
 			shpchp_handle_switch_change(hp_slot, ctrl);
@@ -843,7 +843,7 @@
 	}
 
 	*value = bus_speed;
-	dbg("Max bus speed = %d\n", bus_speed);
+	ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed);
 
 	return retval;
 }
@@ -911,7 +911,7 @@
 		break;
 	}
 
-	dbg("Current bus speed = %d\n", bus_speed);
+	ctrl_dbg(ctrl, "Current bus speed = %d\n", bus_speed);
 	return retval;
 }
 
@@ -949,6 +949,7 @@
 	u8 i;
 
 	ctrl->pci_dev = pdev;  /* pci_dev of the P2P bridge */
+	ctrl_dbg(ctrl, "Hotplug Controller:\n");
 
 	if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device ==
 				PCI_DEVICE_ID_AMD_GOLAM_7450)) {
@@ -958,34 +959,33 @@
 	} else {
 		ctrl->cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC);
 		if (!ctrl->cap_offset) {
-			err("%s : cap_offset == 0\n", __func__);
+			ctrl_err(ctrl, "Cannot find PCI capability\n");
 			goto abort;
 		}
-		dbg("%s: cap_offset = %x\n", __func__, ctrl->cap_offset);
+		ctrl_dbg(ctrl, " cap_offset = %x\n", ctrl->cap_offset);
 
 		rc = shpc_indirect_read(ctrl, 0, &shpc_base_offset);
 		if (rc) {
-			err("%s: cannot read base_offset\n", __func__);
+			ctrl_err(ctrl, "Cannot read base_offset\n");
 			goto abort;
 		}
 
 		rc = shpc_indirect_read(ctrl, 3, &tempdword);
 		if (rc) {
-			err("%s: cannot read slot config\n", __func__);
+			ctrl_err(ctrl, "Cannot read slot config\n");
 			goto abort;
 		}
 		num_slots = tempdword & SLOT_NUM;
-		dbg("%s: num_slots (indirect) %x\n", __func__, num_slots);
+		ctrl_dbg(ctrl, " num_slots (indirect) %x\n", num_slots);
 
 		for (i = 0; i < 9 + num_slots; i++) {
 			rc = shpc_indirect_read(ctrl, i, &tempdword);
 			if (rc) {
-				err("%s: cannot read creg (index = %d)\n",
-				    __func__, i);
+				ctrl_err(ctrl,
+					 "Cannot read creg (index = %d)\n", i);
 				goto abort;
 			}
-			dbg("%s: offset %d: value %x\n", __func__,i,
-					tempdword);
+			ctrl_dbg(ctrl, " offset %d: value %x\n", i, tempdword);
 		}
 
 		ctrl->mmio_base =
@@ -993,30 +993,31 @@
 		ctrl->mmio_size = 0x24 + 0x4 * num_slots;
 	}
 
-	info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor,
-		pdev->subsystem_device);
+	ctrl_info(ctrl, "HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
+		  pdev->vendor, pdev->device, pdev->subsystem_vendor,
+		  pdev->subsystem_device);
 
 	rc = pci_enable_device(pdev);
 	if (rc) {
-		err("%s: pci_enable_device failed\n", __func__);
+		ctrl_err(ctrl, "pci_enable_device failed\n");
 		goto abort;
 	}
 
 	if (!request_mem_region(ctrl->mmio_base, ctrl->mmio_size, MY_NAME)) {
-		err("%s: cannot reserve MMIO region\n", __func__);
+		ctrl_err(ctrl, "Cannot reserve MMIO region\n");
 		rc = -1;
 		goto abort;
 	}
 
 	ctrl->creg = ioremap(ctrl->mmio_base, ctrl->mmio_size);
 	if (!ctrl->creg) {
-		err("%s: cannot remap MMIO region %lx @ %lx\n", __func__,
-		    ctrl->mmio_size, ctrl->mmio_base);
+		ctrl_err(ctrl, "Cannot remap MMIO region %lx @ %lx\n",
+			 ctrl->mmio_size, ctrl->mmio_base);
 		release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
 		rc = -1;
 		goto abort;
 	}
-	dbg("%s: ctrl->creg %p\n", __func__, ctrl->creg);
+	ctrl_dbg(ctrl, "ctrl->creg %p\n", ctrl->creg);
 
 	mutex_init(&ctrl->crit_sect);
 	mutex_init(&ctrl->cmd_lock);
@@ -1035,21 +1036,21 @@
 
 	/* Mask Global Interrupt Mask & Command Complete Interrupt Mask */
 	tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
-	dbg("%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword);
+	ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword);
 	tempdword |= (GLOBAL_INTR_MASK  | GLOBAL_SERR_MASK |
 		      COMMAND_INTR_MASK | ARBITER_SERR_MASK);
 	tempdword &= ~SERR_INTR_RSVDZ_MASK;
 	shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword);
 	tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
-	dbg("%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword);
+	ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword);
 
 	/* Mask the MRL sensor SERR Mask of individual slot in
 	 * Slot SERR-INT Mask & clear all the existing event if any
 	 */
 	for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
 		slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
-		dbg("%s: Default Logical Slot Register %d value %x\n", __func__,
-			hp_slot, slot_reg);
+		ctrl_dbg(ctrl, "Default Logical Slot Register %d value %x\n",
+			 hp_slot, slot_reg);
 		slot_reg |= (PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK |
 			     BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK |
 			     CON_PFAULT_INTR_MASK   | MRL_CHANGE_SERR_MASK |
@@ -1066,24 +1067,24 @@
 		/* Installs the interrupt handler */
 		rc = pci_enable_msi(pdev);
 		if (rc) {
-			info("Can't get msi for the hotplug controller\n");
-			info("Use INTx for the hotplug controller\n");
+			ctrl_info(ctrl,
+				  "Can't get msi for the hotplug controller\n");
+			ctrl_info(ctrl,
+				  "Use INTx for the hotplug controller\n");
 		}
 
 		rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED,
 				 MY_NAME, (void *)ctrl);
-		dbg("%s: request_irq %d for hpc%d (returns %d)\n",
-		    __func__, ctrl->pci_dev->irq,
+		ctrl_dbg(ctrl, "request_irq %d for hpc%d (returns %d)\n",
+			 ctrl->pci_dev->irq,
 		    atomic_read(&shpchp_num_controllers), rc);
 		if (rc) {
-			err("Can't get irq %d for the hotplug controller\n",
-			    ctrl->pci_dev->irq);
+			ctrl_err(ctrl, "Can't get irq %d for the hotplug "
+				 "controller\n", ctrl->pci_dev->irq);
 			goto abort_iounmap;
 		}
 	}
-	dbg("%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n", __func__,
-			pdev->bus->number, PCI_SLOT(pdev->devfn),
-			PCI_FUNC(pdev->devfn), pdev->irq);
+	ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq);
 
 	/*
 	 * If this is the first controller to be initialized,
@@ -1102,8 +1103,8 @@
 	 */
 	for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
 		slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
-		dbg("%s: Default Logical Slot Register %d value %x\n", __func__,
-			hp_slot, slot_reg);
+		ctrl_dbg(ctrl, "Default Logical Slot Register %d value %x\n",
+			 hp_slot, slot_reg);
 		slot_reg &= ~(PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK |
 			      BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK |
 			      CON_PFAULT_INTR_MASK | SLOT_REG_RSVDZ_MASK);
@@ -1116,7 +1117,7 @@
 			       SERR_INTR_RSVDZ_MASK);
 		shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword);
 		tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
-		dbg("%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword);
+		ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword);
 	}
 
 	return 0;
diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c
index 3fc4ec0..138f161 100644
--- a/drivers/pci/hotplug/shpchp_pci.c
+++ b/drivers/pci/hotplug/shpchp_pci.c
@@ -49,9 +49,7 @@
 	/* use default values if we can't get them from firmware */
 	if (get_hp_params_from_firmware(dev, &hpp) ||
 	    !hpp.t0 || (hpp.t0->revision > 1)) {
-		printk(KERN_WARNING
-		       "%s: Could not get hotplug parameters. Use defaults\n",
-		       __func__);
+		warn("Could not get hotplug parameters. Use defaults\n");
 		hpp.t0 = &hpp.type0_data;
 		hpp.t0->revision = 0;
 		hpp.t0->cache_line_size = 8;
@@ -101,18 +99,20 @@
 	struct pci_dev *dev;
 	struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
 	int num, fn;
+	struct controller *ctrl = p_slot->ctrl;
 
 	dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
 	if (dev) {
-		err("Device %s already exists at %x:%x, cannot hot-add\n",
-				pci_name(dev), p_slot->bus, p_slot->device);
+		ctrl_err(ctrl, "Device %s already exists "
+			 "at %04x:%02x:%02x, cannot hot-add\n", pci_name(dev),
+			 pci_domain_nr(parent), p_slot->bus, p_slot->device);
 		pci_dev_put(dev);
 		return -EINVAL;
 	}
 
 	num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
 	if (num == 0) {
-		err("No new device found\n");
+		ctrl_err(ctrl, "No new device found\n");
 		return -ENODEV;
 	}
 
@@ -121,8 +121,8 @@
 		if (!dev)
 			continue;
 		if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
-			err("Cannot hot-add display device %s\n",
-					pci_name(dev));
+			ctrl_err(ctrl, "Cannot hot-add display device %s\n",
+				 pci_name(dev));
 			pci_dev_put(dev);
 			continue;
 		}
@@ -138,14 +138,15 @@
 					break;
 			}
 			if (busnr >= end) {
-				err("No free bus for hot-added bridge\n");
+				ctrl_err(ctrl,
+					 "No free bus for hot-added bridge\n");
 				pci_dev_put(dev);
 				continue;
 			}
 			child = pci_add_new_bus(parent, dev, busnr);
 			if (!child) {
-				err("Cannot add new bus for %s\n",
-						pci_name(dev));
+				ctrl_err(ctrl, "Cannot add new bus for %s\n",
+					 pci_name(dev));
 				pci_dev_put(dev);
 				continue;
 			}
@@ -168,8 +169,10 @@
 	int j;
 	u8 bctl = 0;
 	struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
+	struct controller *ctrl = p_slot->ctrl;
 
-	dbg("%s: bus/dev = %x/%x\n", __func__, p_slot->bus, p_slot->device);
+	ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:%02x\n",
+		 __func__, pci_domain_nr(parent), p_slot->bus, p_slot->device);
 
 	for (j=0; j<8 ; j++) {
 		struct pci_dev* temp = pci_get_slot(parent,
@@ -177,16 +180,17 @@
 		if (!temp)
 			continue;
 		if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
-			err("Cannot remove display device %s\n",
-					pci_name(temp));
+			ctrl_err(ctrl, "Cannot remove display device %s\n",
+				 pci_name(temp));
 			pci_dev_put(temp);
 			continue;
 		}
 		if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
 			pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
 			if (bctl & PCI_BRIDGE_CTL_VGA) {
-				err("Cannot remove display device %s\n",
-						pci_name(temp));
+				ctrl_err(ctrl,
+					 "Cannot remove display device %s\n",
+					 pci_name(temp));
 				pci_dev_put(temp);
 				continue;
 			}
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 8b51e10..a269272 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -18,6 +18,7 @@
  * Author: Ashok Raj <ashok.raj@intel.com>
  * Author: Shaohua Li <shaohua.li@intel.com>
  * Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
+ * Author: Fenghua Yu <fenghua.yu@intel.com>
  */
 
 #include <linux/init.h>
@@ -35,11 +36,13 @@
 #include <linux/timer.h>
 #include <linux/iova.h>
 #include <linux/intel-iommu.h>
-#include <asm/proto.h> /* force_iommu in this header in x86-64*/
 #include <asm/cacheflush.h>
 #include <asm/iommu.h>
 #include "pci.h"
 
+#define ROOT_SIZE		VTD_PAGE_SIZE
+#define CONTEXT_SIZE		VTD_PAGE_SIZE
+
 #define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
 #define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
 
@@ -199,7 +202,7 @@
 			spin_unlock_irqrestore(&iommu->lock, flags);
 			return NULL;
 		}
-		__iommu_flush_cache(iommu, (void *)context, PAGE_SIZE_4K);
+		__iommu_flush_cache(iommu, (void *)context, CONTEXT_SIZE);
 		phy_addr = virt_to_phys((void *)context);
 		set_root_value(root, phy_addr);
 		set_root_present(root);
@@ -345,7 +348,7 @@
 				return NULL;
 			}
 			__iommu_flush_cache(domain->iommu, tmp_page,
-					PAGE_SIZE_4K);
+					PAGE_SIZE);
 			dma_set_pte_addr(*pte, virt_to_phys(tmp_page));
 			/*
 			 * high level table always sets r/w, last level page
@@ -408,13 +411,13 @@
 	start &= (((u64)1) << addr_width) - 1;
 	end &= (((u64)1) << addr_width) - 1;
 	/* in case it's partial page */
-	start = PAGE_ALIGN_4K(start);
-	end &= PAGE_MASK_4K;
+	start = PAGE_ALIGN(start);
+	end &= PAGE_MASK;
 
 	/* we don't need lock here, nobody else touches the iova range */
 	while (start < end) {
 		dma_pte_clear_one(domain, start);
-		start += PAGE_SIZE_4K;
+		start += VTD_PAGE_SIZE;
 	}
 }
 
@@ -468,7 +471,7 @@
 	if (!root)
 		return -ENOMEM;
 
-	__iommu_flush_cache(iommu, root, PAGE_SIZE_4K);
+	__iommu_flush_cache(iommu, root, ROOT_SIZE);
 
 	spin_lock_irqsave(&iommu->lock, flags);
 	iommu->root_entry = root;
@@ -567,27 +570,6 @@
 	return 0;
 }
 
-static int inline iommu_flush_context_global(struct intel_iommu *iommu,
-	int non_present_entry_flush)
-{
-	return __iommu_flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL,
-		non_present_entry_flush);
-}
-
-static int inline iommu_flush_context_domain(struct intel_iommu *iommu, u16 did,
-	int non_present_entry_flush)
-{
-	return __iommu_flush_context(iommu, did, 0, 0, DMA_CCMD_DOMAIN_INVL,
-		non_present_entry_flush);
-}
-
-static int inline iommu_flush_context_device(struct intel_iommu *iommu,
-	u16 did, u16 source_id, u8 function_mask, int non_present_entry_flush)
-{
-	return __iommu_flush_context(iommu, did, source_id, function_mask,
-		DMA_CCMD_DEVICE_INVL, non_present_entry_flush);
-}
-
 /* return value determine if we need a write buffer flush */
 static int __iommu_flush_iotlb(struct intel_iommu *iommu, u16 did,
 	u64 addr, unsigned int size_order, u64 type,
@@ -655,37 +637,25 @@
 		printk(KERN_ERR"IOMMU: flush IOTLB failed\n");
 	if (DMA_TLB_IAIG(val) != DMA_TLB_IIRG(type))
 		pr_debug("IOMMU: tlb flush request %Lx, actual %Lx\n",
-			DMA_TLB_IIRG(type), DMA_TLB_IAIG(val));
+			(unsigned long long)DMA_TLB_IIRG(type),
+			(unsigned long long)DMA_TLB_IAIG(val));
 	/* flush iotlb entry will implicitly flush write buffer */
 	return 0;
 }
 
-static int inline iommu_flush_iotlb_global(struct intel_iommu *iommu,
-	int non_present_entry_flush)
-{
-	return __iommu_flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH,
-		non_present_entry_flush);
-}
-
-static int inline iommu_flush_iotlb_dsi(struct intel_iommu *iommu, u16 did,
-	int non_present_entry_flush)
-{
-	return __iommu_flush_iotlb(iommu, did, 0, 0, DMA_TLB_DSI_FLUSH,
-		non_present_entry_flush);
-}
-
 static int iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did,
 	u64 addr, unsigned int pages, int non_present_entry_flush)
 {
 	unsigned int mask;
 
-	BUG_ON(addr & (~PAGE_MASK_4K));
+	BUG_ON(addr & (~VTD_PAGE_MASK));
 	BUG_ON(pages == 0);
 
 	/* Fallback to domain selective flush if no PSI support */
 	if (!cap_pgsel_inv(iommu->cap))
-		return iommu_flush_iotlb_dsi(iommu, did,
-			non_present_entry_flush);
+		return iommu->flush.flush_iotlb(iommu, did, 0, 0,
+						DMA_TLB_DSI_FLUSH,
+						non_present_entry_flush);
 
 	/*
 	 * PSI requires page size to be 2 ^ x, and the base address is naturally
@@ -694,11 +664,12 @@
 	mask = ilog2(__roundup_pow_of_two(pages));
 	/* Fallback to domain selective flush if size is too big */
 	if (mask > cap_max_amask_val(iommu->cap))
-		return iommu_flush_iotlb_dsi(iommu, did,
-			non_present_entry_flush);
+		return iommu->flush.flush_iotlb(iommu, did, 0, 0,
+			DMA_TLB_DSI_FLUSH, non_present_entry_flush);
 
-	return __iommu_flush_iotlb(iommu, did, addr, mask,
-		DMA_TLB_PSI_FLUSH, non_present_entry_flush);
+	return iommu->flush.flush_iotlb(iommu, did, addr, mask,
+					DMA_TLB_PSI_FLUSH,
+					non_present_entry_flush);
 }
 
 static void iommu_disable_protect_mem_regions(struct intel_iommu *iommu)
@@ -831,7 +802,7 @@
 }
 
 static int iommu_page_fault_do_one(struct intel_iommu *iommu, int type,
-		u8 fault_reason, u16 source_id, u64 addr)
+		u8 fault_reason, u16 source_id, unsigned long long addr)
 {
 	const char *reason;
 
@@ -1084,9 +1055,9 @@
 			if (!r->flags || !(r->flags & IORESOURCE_MEM))
 				continue;
 			addr = r->start;
-			addr &= PAGE_MASK_4K;
+			addr &= PAGE_MASK;
 			size = r->end - addr;
-			size = PAGE_ALIGN_4K(size);
+			size = PAGE_ALIGN(size);
 			iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr),
 				IOVA_PFN(size + addr) - 1);
 			if (!iova)
@@ -1148,7 +1119,7 @@
 	domain->pgd = (struct dma_pte *)alloc_pgtable_page();
 	if (!domain->pgd)
 		return -ENOMEM;
-	__iommu_flush_cache(iommu, domain->pgd, PAGE_SIZE_4K);
+	__iommu_flush_cache(iommu, domain->pgd, PAGE_SIZE);
 	return 0;
 }
 
@@ -1164,7 +1135,7 @@
 	/* destroy iovas */
 	put_iova_domain(&domain->iovad);
 	end = DOMAIN_MAX_ADDR(domain->gaw);
-	end = end & (~PAGE_MASK_4K);
+	end = end & (~PAGE_MASK);
 
 	/* clear ptes */
 	dma_pte_clear_range(domain, 0, end);
@@ -1204,11 +1175,13 @@
 	__iommu_flush_cache(iommu, context, sizeof(*context));
 
 	/* it's a non-present to present mapping */
-	if (iommu_flush_context_device(iommu, domain->id,
-			(((u16)bus) << 8) | devfn, DMA_CCMD_MASK_NOBIT, 1))
+	if (iommu->flush.flush_context(iommu, domain->id,
+		(((u16)bus) << 8) | devfn, DMA_CCMD_MASK_NOBIT,
+		DMA_CCMD_DEVICE_INVL, 1))
 		iommu_flush_write_buffer(iommu);
 	else
-		iommu_flush_iotlb_dsi(iommu, 0, 0);
+		iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_DSI_FLUSH, 0);
+
 	spin_unlock_irqrestore(&iommu->lock, flags);
 	return 0;
 }
@@ -1283,22 +1256,25 @@
 	u64 start_pfn, end_pfn;
 	struct dma_pte *pte;
 	int index;
+	int addr_width = agaw_to_width(domain->agaw);
+
+	hpa &= (((u64)1) << addr_width) - 1;
 
 	if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0)
 		return -EINVAL;
-	iova &= PAGE_MASK_4K;
-	start_pfn = ((u64)hpa) >> PAGE_SHIFT_4K;
-	end_pfn = (PAGE_ALIGN_4K(((u64)hpa) + size)) >> PAGE_SHIFT_4K;
+	iova &= PAGE_MASK;
+	start_pfn = ((u64)hpa) >> VTD_PAGE_SHIFT;
+	end_pfn = (VTD_PAGE_ALIGN(((u64)hpa) + size)) >> VTD_PAGE_SHIFT;
 	index = 0;
 	while (start_pfn < end_pfn) {
-		pte = addr_to_dma_pte(domain, iova + PAGE_SIZE_4K * index);
+		pte = addr_to_dma_pte(domain, iova + VTD_PAGE_SIZE * index);
 		if (!pte)
 			return -ENOMEM;
 		/* We don't need lock here, nobody else
 		 * touches the iova range
 		 */
 		BUG_ON(dma_pte_addr(*pte));
-		dma_set_pte_addr(*pte, start_pfn << PAGE_SHIFT_4K);
+		dma_set_pte_addr(*pte, start_pfn << VTD_PAGE_SHIFT);
 		dma_set_pte_prot(*pte, prot);
 		__iommu_flush_cache(domain->iommu, pte, sizeof(*pte));
 		start_pfn++;
@@ -1310,8 +1286,10 @@
 static void detach_domain_for_dev(struct dmar_domain *domain, u8 bus, u8 devfn)
 {
 	clear_context_table(domain->iommu, bus, devfn);
-	iommu_flush_context_global(domain->iommu, 0);
-	iommu_flush_iotlb_global(domain->iommu, 0);
+	domain->iommu->flush.flush_context(domain->iommu, 0, 0, 0,
+					   DMA_CCMD_GLOBAL_INVL, 0);
+	domain->iommu->flush.flush_iotlb(domain->iommu, 0, 0, 0,
+					 DMA_TLB_GLOBAL_FLUSH, 0);
 }
 
 static void domain_remove_dev_info(struct dmar_domain *domain)
@@ -1474,11 +1452,13 @@
 	return find_domain(pdev);
 }
 
-static int iommu_prepare_identity_map(struct pci_dev *pdev, u64 start, u64 end)
+static int iommu_prepare_identity_map(struct pci_dev *pdev,
+				      unsigned long long start,
+				      unsigned long long end)
 {
 	struct dmar_domain *domain;
 	unsigned long size;
-	u64 base;
+	unsigned long long base;
 	int ret;
 
 	printk(KERN_INFO
@@ -1490,9 +1470,9 @@
 		return -ENOMEM;
 
 	/* The address might not be aligned */
-	base = start & PAGE_MASK_4K;
+	base = start & PAGE_MASK;
 	size = end - base;
-	size = PAGE_ALIGN_4K(size);
+	size = PAGE_ALIGN(size);
 	if (!reserve_iova(&domain->iovad, IOVA_PFN(base),
 			IOVA_PFN(base + size) - 1)) {
 		printk(KERN_ERR "IOMMU: reserve iova failed\n");
@@ -1662,6 +1642,28 @@
 		}
 	}
 
+	for_each_drhd_unit(drhd) {
+		if (drhd->ignored)
+			continue;
+
+		iommu = drhd->iommu;
+		if (dmar_enable_qi(iommu)) {
+			/*
+			 * Queued Invalidate not enabled, use Register Based
+			 * Invalidate
+			 */
+			iommu->flush.flush_context = __iommu_flush_context;
+			iommu->flush.flush_iotlb = __iommu_flush_iotlb;
+			printk(KERN_INFO "IOMMU 0x%Lx: using Register based "
+			       "invalidation\n", drhd->reg_base_addr);
+		} else {
+			iommu->flush.flush_context = qi_flush_context;
+			iommu->flush.flush_iotlb = qi_flush_iotlb;
+			printk(KERN_INFO "IOMMU 0x%Lx: using Queued "
+			       "invalidation\n", drhd->reg_base_addr);
+		}
+	}
+
 	/*
 	 * For each rmrr
 	 *   for each dev attached to rmrr
@@ -1714,9 +1716,10 @@
 
 		iommu_set_root_entry(iommu);
 
-		iommu_flush_context_global(iommu, 0);
-		iommu_flush_iotlb_global(iommu, 0);
-
+		iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL,
+					   0);
+		iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH,
+					 0);
 		iommu_disable_protect_mem_regions(iommu);
 
 		ret = iommu_enable_translation(iommu);
@@ -1738,8 +1741,8 @@
 static inline u64 aligned_size(u64 host_addr, size_t size)
 {
 	u64 addr;
-	addr = (host_addr & (~PAGE_MASK_4K)) + size;
-	return PAGE_ALIGN_4K(addr);
+	addr = (host_addr & (~PAGE_MASK)) + size;
+	return PAGE_ALIGN(addr);
 }
 
 struct iova *
@@ -1753,20 +1756,20 @@
 		return NULL;
 
 	piova = alloc_iova(&domain->iovad,
-			size >> PAGE_SHIFT_4K, IOVA_PFN(end), 1);
+			size >> PAGE_SHIFT, IOVA_PFN(end), 1);
 	return piova;
 }
 
 static struct iova *
 __intel_alloc_iova(struct device *dev, struct dmar_domain *domain,
-		size_t size)
+		   size_t size, u64 dma_mask)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct iova *iova = NULL;
 
-	if ((pdev->dma_mask <= DMA_32BIT_MASK) || (dmar_forcedac)) {
-		iova = iommu_alloc_iova(domain, size, pdev->dma_mask);
-	} else  {
+	if (dma_mask <= DMA_32BIT_MASK || dmar_forcedac)
+		iova = iommu_alloc_iova(domain, size, dma_mask);
+	else {
 		/*
 		 * First try to allocate an io virtual address in
 		 * DMA_32BIT_MASK and if that fails then try allocating
@@ -1774,7 +1777,7 @@
 		 */
 		iova = iommu_alloc_iova(domain, size, DMA_32BIT_MASK);
 		if (!iova)
-			iova = iommu_alloc_iova(domain, size, pdev->dma_mask);
+			iova = iommu_alloc_iova(domain, size, dma_mask);
 	}
 
 	if (!iova) {
@@ -1813,12 +1816,12 @@
 	return domain;
 }
 
-static dma_addr_t
-intel_map_single(struct device *hwdev, phys_addr_t paddr, size_t size, int dir)
+static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr,
+				     size_t size, int dir, u64 dma_mask)
 {
 	struct pci_dev *pdev = to_pci_dev(hwdev);
 	struct dmar_domain *domain;
-	unsigned long start_paddr;
+	phys_addr_t start_paddr;
 	struct iova *iova;
 	int prot = 0;
 	int ret;
@@ -1833,11 +1836,11 @@
 
 	size = aligned_size((u64)paddr, size);
 
-	iova = __intel_alloc_iova(hwdev, domain, size);
+	iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask);
 	if (!iova)
 		goto error;
 
-	start_paddr = iova->pfn_lo << PAGE_SHIFT_4K;
+	start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT;
 
 	/*
 	 * Check if DMAR supports zero-length reads on write only
@@ -1855,30 +1858,33 @@
 	 * is not a big problem
 	 */
 	ret = domain_page_mapping(domain, start_paddr,
-		((u64)paddr) & PAGE_MASK_4K, size, prot);
+		((u64)paddr) & PAGE_MASK, size, prot);
 	if (ret)
 		goto error;
 
-	pr_debug("Device %s request: %lx@%llx mapping: %lx@%llx, dir %d\n",
-		pci_name(pdev), size, (u64)paddr,
-		size, (u64)start_paddr, dir);
-
 	/* it's a non-present to present mapping */
 	ret = iommu_flush_iotlb_psi(domain->iommu, domain->id,
-			start_paddr, size >> PAGE_SHIFT_4K, 1);
+			start_paddr, size >> VTD_PAGE_SHIFT, 1);
 	if (ret)
 		iommu_flush_write_buffer(domain->iommu);
 
-	return (start_paddr + ((u64)paddr & (~PAGE_MASK_4K)));
+	return start_paddr + ((u64)paddr & (~PAGE_MASK));
 
 error:
 	if (iova)
 		__free_iova(&domain->iovad, iova);
 	printk(KERN_ERR"Device %s request: %lx@%llx dir %d --- failed\n",
-		pci_name(pdev), size, (u64)paddr, dir);
+		pci_name(pdev), size, (unsigned long long)paddr, dir);
 	return 0;
 }
 
+dma_addr_t intel_map_single(struct device *hwdev, phys_addr_t paddr,
+			    size_t size, int dir)
+{
+	return __intel_map_single(hwdev, paddr, size, dir,
+				  to_pci_dev(hwdev)->dma_mask);
+}
+
 static void flush_unmaps(void)
 {
 	int i, j;
@@ -1891,7 +1897,8 @@
 			struct intel_iommu *iommu =
 				deferred_flush[i].domain[0]->iommu;
 
-			iommu_flush_iotlb_global(iommu, 0);
+			iommu->flush.flush_iotlb(iommu, 0, 0, 0,
+						 DMA_TLB_GLOBAL_FLUSH, 0);
 			for (j = 0; j < deferred_flush[i].next; j++) {
 				__free_iova(&deferred_flush[i].domain[j]->iovad,
 						deferred_flush[i].iova[j]);
@@ -1936,8 +1943,8 @@
 	spin_unlock_irqrestore(&async_umap_flush_lock, flags);
 }
 
-static void intel_unmap_single(struct device *dev, dma_addr_t dev_addr,
-	size_t size, int dir)
+void intel_unmap_single(struct device *dev, dma_addr_t dev_addr, size_t size,
+			int dir)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct dmar_domain *domain;
@@ -1953,11 +1960,11 @@
 	if (!iova)
 		return;
 
-	start_addr = iova->pfn_lo << PAGE_SHIFT_4K;
+	start_addr = iova->pfn_lo << PAGE_SHIFT;
 	size = aligned_size((u64)dev_addr, size);
 
 	pr_debug("Device %s unmapping: %lx@%llx\n",
-		pci_name(pdev), size, (u64)start_addr);
+		pci_name(pdev), size, (unsigned long long)start_addr);
 
 	/*  clear the whole page */
 	dma_pte_clear_range(domain, start_addr, start_addr + size);
@@ -1965,7 +1972,7 @@
 	dma_pte_free_pagetable(domain, start_addr, start_addr + size);
 	if (intel_iommu_strict) {
 		if (iommu_flush_iotlb_psi(domain->iommu,
-			domain->id, start_addr, size >> PAGE_SHIFT_4K, 0))
+			domain->id, start_addr, size >> VTD_PAGE_SHIFT, 0))
 			iommu_flush_write_buffer(domain->iommu);
 		/* free iova */
 		__free_iova(&domain->iovad, iova);
@@ -1978,13 +1985,13 @@
 	}
 }
 
-static void * intel_alloc_coherent(struct device *hwdev, size_t size,
-		       dma_addr_t *dma_handle, gfp_t flags)
+void *intel_alloc_coherent(struct device *hwdev, size_t size,
+			   dma_addr_t *dma_handle, gfp_t flags)
 {
 	void *vaddr;
 	int order;
 
-	size = PAGE_ALIGN_4K(size);
+	size = PAGE_ALIGN(size);
 	order = get_order(size);
 	flags &= ~(GFP_DMA | GFP_DMA32);
 
@@ -1993,19 +2000,21 @@
 		return NULL;
 	memset(vaddr, 0, size);
 
-	*dma_handle = intel_map_single(hwdev, virt_to_bus(vaddr), size, DMA_BIDIRECTIONAL);
+	*dma_handle = __intel_map_single(hwdev, virt_to_bus(vaddr), size,
+					 DMA_BIDIRECTIONAL,
+					 hwdev->coherent_dma_mask);
 	if (*dma_handle)
 		return vaddr;
 	free_pages((unsigned long)vaddr, order);
 	return NULL;
 }
 
-static void intel_free_coherent(struct device *hwdev, size_t size,
-	void *vaddr, dma_addr_t dma_handle)
+void intel_free_coherent(struct device *hwdev, size_t size, void *vaddr,
+			 dma_addr_t dma_handle)
 {
 	int order;
 
-	size = PAGE_ALIGN_4K(size);
+	size = PAGE_ALIGN(size);
 	order = get_order(size);
 
 	intel_unmap_single(hwdev, dma_handle, size, DMA_BIDIRECTIONAL);
@@ -2013,8 +2022,9 @@
 }
 
 #define SG_ENT_VIRT_ADDRESS(sg)	(sg_virt((sg)))
-static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist,
-	int nelems, int dir)
+
+void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist,
+		    int nelems, int dir)
 {
 	int i;
 	struct pci_dev *pdev = to_pci_dev(hwdev);
@@ -2038,7 +2048,7 @@
 		size += aligned_size((u64)addr, sg->length);
 	}
 
-	start_addr = iova->pfn_lo << PAGE_SHIFT_4K;
+	start_addr = iova->pfn_lo << PAGE_SHIFT;
 
 	/*  clear the whole page */
 	dma_pte_clear_range(domain, start_addr, start_addr + size);
@@ -2046,7 +2056,7 @@
 	dma_pte_free_pagetable(domain, start_addr, start_addr + size);
 
 	if (iommu_flush_iotlb_psi(domain->iommu, domain->id, start_addr,
-			size >> PAGE_SHIFT_4K, 0))
+			size >> VTD_PAGE_SHIFT, 0))
 		iommu_flush_write_buffer(domain->iommu);
 
 	/* free iova */
@@ -2067,8 +2077,8 @@
 	return nelems;
 }
 
-static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist,
-				int nelems, int dir)
+int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int nelems,
+		 int dir)
 {
 	void *addr;
 	int i;
@@ -2096,7 +2106,7 @@
 		size += aligned_size((u64)addr, sg->length);
 	}
 
-	iova = __intel_alloc_iova(hwdev, domain, size);
+	iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask);
 	if (!iova) {
 		sglist->dma_length = 0;
 		return 0;
@@ -2112,14 +2122,14 @@
 	if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL)
 		prot |= DMA_PTE_WRITE;
 
-	start_addr = iova->pfn_lo << PAGE_SHIFT_4K;
+	start_addr = iova->pfn_lo << PAGE_SHIFT;
 	offset = 0;
 	for_each_sg(sglist, sg, nelems, i) {
 		addr = SG_ENT_VIRT_ADDRESS(sg);
 		addr = (void *)virt_to_phys(addr);
 		size = aligned_size((u64)addr, sg->length);
 		ret = domain_page_mapping(domain, start_addr + offset,
-			((u64)addr) & PAGE_MASK_4K,
+			((u64)addr) & PAGE_MASK,
 			size, prot);
 		if (ret) {
 			/*  clear the page */
@@ -2133,14 +2143,14 @@
 			return 0;
 		}
 		sg->dma_address = start_addr + offset +
-				((u64)addr & (~PAGE_MASK_4K));
+				((u64)addr & (~PAGE_MASK));
 		sg->dma_length = sg->length;
 		offset += size;
 	}
 
 	/* it's a non-present to present mapping */
 	if (iommu_flush_iotlb_psi(domain->iommu, domain->id,
-			start_addr, offset >> PAGE_SHIFT_4K, 1))
+			start_addr, offset >> VTD_PAGE_SHIFT, 1))
 		iommu_flush_write_buffer(domain->iommu);
 	return nelems;
 }
@@ -2180,7 +2190,6 @@
 					 sizeof(struct device_domain_info),
 					 0,
 					 SLAB_HWCACHE_ALIGN,
-
 					 NULL);
 	if (!iommu_devinfo_cache) {
 		printk(KERN_ERR "Couldn't create devinfo cache\n");
@@ -2198,7 +2207,6 @@
 					 sizeof(struct iova),
 					 0,
 					 SLAB_HWCACHE_ALIGN,
-
 					 NULL);
 	if (!iommu_iova_cache) {
 		printk(KERN_ERR "Couldn't create iova cache\n");
@@ -2327,7 +2335,7 @@
 		return;
 
 	end = DOMAIN_MAX_ADDR(domain->gaw);
-	end = end & (~PAGE_MASK_4K);
+	end = end & (~VTD_PAGE_MASK);
 
 	/* clear ptes */
 	dma_pte_clear_range(domain, 0, end);
@@ -2423,6 +2431,6 @@
 	if (pte)
 		pfn = dma_pte_addr(*pte);
 
-	return pfn >> PAGE_SHIFT_4K;
+	return pfn >> VTD_PAGE_SHIFT;
 }
 EXPORT_SYMBOL_GPL(intel_iommu_iova_to_pfn);
diff --git a/drivers/pci/irq.c b/drivers/pci/irq.c
new file mode 100644
index 0000000..6441dfa
--- /dev/null
+++ b/drivers/pci/irq.c
@@ -0,0 +1,60 @@
+/*
+ * PCI IRQ failure handing code
+ *
+ * Copyright (c) 2008 James Bottomley <James.Bottomley@HansenPartnership.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+
+static void pci_note_irq_problem(struct pci_dev *pdev, const char *reason)
+{
+	struct pci_dev *parent = to_pci_dev(pdev->dev.parent);
+
+	dev_printk(KERN_ERR, &pdev->dev,
+		   "Potentially misrouted IRQ (Bridge %s %04x:%04x)\n",
+		   parent->dev.bus_id, parent->vendor, parent->device);
+	dev_printk(KERN_ERR, &pdev->dev, "%s\n", reason);
+	dev_printk(KERN_ERR, &pdev->dev, "Please report to linux-kernel@vger.kernel.org\n");
+	WARN_ON(1);
+}
+
+/**
+ * pci_lost_interrupt - reports a lost PCI interrupt
+ * @pdev:	device whose interrupt is lost
+ * 
+ * The primary function of this routine is to report a lost interrupt
+ * in a standard way which users can recognise (instead of blaming the
+ * driver).
+ *
+ * Returns:
+ *  a suggestion for fixing it (although the driver is not required to
+ * act on this).
+ */
+enum pci_lost_interrupt_reason pci_lost_interrupt(struct pci_dev *pdev)
+{
+	if (pdev->msi_enabled || pdev->msix_enabled) {
+		enum pci_lost_interrupt_reason ret;
+
+		if (pdev->msix_enabled) {
+			pci_note_irq_problem(pdev, "MSIX routing failure");
+			ret = PCI_LOST_IRQ_DISABLE_MSIX;
+		} else {
+			pci_note_irq_problem(pdev, "MSI routing failure");
+			ret = PCI_LOST_IRQ_DISABLE_MSI;
+		}
+		return ret;
+	}
+#ifdef CONFIG_ACPI
+	if (!(acpi_disabled || acpi_noirq)) {
+		pci_note_irq_problem(pdev, "Potential ACPI misrouting please reboot with acpi=noirq");
+		/* currently no way to fix acpi on the fly */
+		return PCI_LOST_IRQ_DISABLE_ACPI;
+	}
+#endif
+	pci_note_irq_problem(pdev, "unknown cause (not MSI or ACPI)");
+	return PCI_LOST_IRQ_NO_INFORMATION;
+}
+EXPORT_SYMBOL(pci_lost_interrupt);
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d281201..74801f7 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -759,3 +759,24 @@
 {
 	INIT_LIST_HEAD(&dev->msi_list);
 }
+
+#ifdef CONFIG_ACPI
+#include <linux/acpi.h>
+#include <linux/pci-acpi.h>
+static void __devinit msi_acpi_init(void)
+{
+	if (acpi_pci_disabled)
+		return;
+	pci_osc_support_set(OSC_MSI_SUPPORT);
+	pcie_osc_support_set(OSC_MSI_SUPPORT);
+}
+#else
+static inline void msi_acpi_init(void) { }
+#endif /* CONFIG_ACPI */
+
+void __devinit msi_init(void)
+{
+	if (!pci_msi_enable)
+		return;
+	msi_acpi_init();
+}
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 89a2f0f..b3a63ed 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -24,17 +24,17 @@
 	acpi_handle handle;
 	u32 support_set;
 	u32 control_set;
-	int is_queried;
-	u32 query_result;
 	struct list_head sibiling;
 };
 static LIST_HEAD(acpi_osc_data_list);
 
 struct acpi_osc_args {
 	u32 capbuf[3];
-	u32 query_result;
+	u32 ctrl_result;
 };
 
+static DEFINE_MUTEX(pci_acpi_lock);
+
 static struct acpi_osc_data *acpi_get_osc_data(acpi_handle handle)
 {
 	struct acpi_osc_data *data;
@@ -83,6 +83,9 @@
 	if (ACPI_FAILURE(status))
 		return status;
 
+	if (!output.length)
+		return AE_NULL_OBJECT;
+
 	out_obj = output.pointer;
 	if (out_obj->type != ACPI_TYPE_BUFFER) {
 		printk(KERN_DEBUG "Evaluate _OSC returns wrong type\n");
@@ -108,9 +111,8 @@
 		goto out_kfree;
 	}
 out_success:
-	if (flags & OSC_QUERY_ENABLE)
-		osc_args->query_result =
-			*((u32 *)(out_obj->buffer.pointer + 8));
+	osc_args->ctrl_result =
+		*((u32 *)(out_obj->buffer.pointer + 8));
 	status = AE_OK;
 
 out_kfree:
@@ -118,39 +120,51 @@
 	return status;
 }
 
+static acpi_status __acpi_query_osc(u32 flags, struct acpi_osc_data *osc_data,
+				    u32 *result)
+{
+	acpi_status status;
+	u32 support_set;
+	struct acpi_osc_args osc_args;
+
+	/* do _OSC query for all possible controls */
+	support_set = osc_data->support_set | (flags & OSC_SUPPORT_MASKS);
+	osc_args.capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
+	osc_args.capbuf[OSC_SUPPORT_TYPE] = support_set;
+	osc_args.capbuf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS;
+
+	status = acpi_run_osc(osc_data->handle, &osc_args);
+	if (ACPI_SUCCESS(status)) {
+		osc_data->support_set = support_set;
+		*result = osc_args.ctrl_result;
+	}
+
+	return status;
+}
+
 static acpi_status acpi_query_osc(acpi_handle handle,
 				  u32 level, void *context, void **retval)
 {
 	acpi_status status;
 	struct acpi_osc_data *osc_data;
-	u32 flags = (unsigned long)context, support_set;
+	u32 flags = (unsigned long)context, dummy;
 	acpi_handle tmp;
-	struct acpi_osc_args osc_args;
 
 	status = acpi_get_handle(handle, "_OSC", &tmp);
 	if (ACPI_FAILURE(status))
-		return status;
+		return AE_OK;
 
+	mutex_lock(&pci_acpi_lock);
 	osc_data = acpi_get_osc_data(handle);
 	if (!osc_data) {
 		printk(KERN_ERR "acpi osc data array is full\n");
-		return AE_ERROR;
+		goto out;
 	}
 
-	/* do _OSC query for all possible controls */
-	support_set = osc_data->support_set | (flags & OSC_SUPPORT_MASKS);
-	osc_args.capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
-	osc_args.capbuf[OSC_SUPPORT_TYPE] = support_set;
-	osc_args.capbuf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS;
-
-	status = acpi_run_osc(handle, &osc_args);
-	if (ACPI_SUCCESS(status)) {
-		osc_data->support_set = support_set;
-		osc_data->query_result = osc_args.query_result;
-		osc_data->is_queried = 1;
-	}
-
-	return status;
+	__acpi_query_osc(flags, osc_data, &dummy);
+out:
+	mutex_unlock(&pci_acpi_lock);
+	return AE_OK;
 }
 
 /**
@@ -181,7 +195,7 @@
 acpi_status pci_osc_control_set(acpi_handle handle, u32 flags)
 {
 	acpi_status status;
-	u32 ctrlset, control_set;
+	u32 ctrlset, control_set, result;
 	acpi_handle tmp;
 	struct acpi_osc_data *osc_data;
 	struct acpi_osc_args osc_args;
@@ -190,19 +204,28 @@
 	if (ACPI_FAILURE(status))
 		return status;
 
+	mutex_lock(&pci_acpi_lock);
 	osc_data = acpi_get_osc_data(handle);
 	if (!osc_data) {
 		printk(KERN_ERR "acpi osc data array is full\n");
-		return AE_ERROR;
+		status = AE_ERROR;
+		goto out;
 	}
 
 	ctrlset = (flags & OSC_CONTROL_MASKS);
-	if (!ctrlset)
-		return AE_TYPE;
+	if (!ctrlset) {
+		status = AE_TYPE;
+		goto out;
+	}
 
-	if (osc_data->is_queried &&
-	    ((osc_data->query_result & ctrlset) != ctrlset))
-		return AE_SUPPORT;
+	status = __acpi_query_osc(osc_data->support_set, osc_data, &result);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	if ((result & ctrlset) != ctrlset) {
+		status = AE_SUPPORT;
+		goto out;
+	}
 
 	control_set = osc_data->control_set | ctrlset;
 	osc_args.capbuf[OSC_QUERY_TYPE] = 0;
@@ -211,7 +234,8 @@
 	status = acpi_run_osc(handle, &osc_args);
 	if (ACPI_SUCCESS(status))
 		osc_data->control_set = control_set;
-
+out:
+	mutex_unlock(&pci_acpi_lock);
 	return status;
 }
 EXPORT_SYMBOL(pci_osc_control_set);
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 4db261e..21f2ac6 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -18,6 +18,7 @@
 #include <linux/log2.h>
 #include <linux/pci-aspm.h>
 #include <linux/pm_wakeup.h>
+#include <linux/interrupt.h>
 #include <asm/dma.h>	/* isa_dma_bridge_buggy */
 #include "pci.h"
 
@@ -1308,27 +1309,32 @@
 	int pos;
 	u32 cap;
 	u16 ctrl;
+	struct pci_dev *bridge;
 
-	if (!dev->is_pcie)
+	if (!dev->is_pcie || dev->devfn)
 		return;
 
-	if (dev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
-	    dev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
-		return;
-
-	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
 	if (!pos)
 		return;
 
-	pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP2, &cap);
+	bridge = dev->bus->self;
+	if (!bridge || !bridge->is_pcie)
+		return;
+
+	pos = pci_find_capability(bridge, PCI_CAP_ID_EXP);
+	if (!pos)
+		return;
+
+	pci_read_config_dword(bridge, pos + PCI_EXP_DEVCAP2, &cap);
 	if (!(cap & PCI_EXP_DEVCAP2_ARI))
 		return;
 
-	pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
+	pci_read_config_word(bridge, pos + PCI_EXP_DEVCTL2, &ctrl);
 	ctrl |= PCI_EXP_DEVCTL2_ARI;
-	pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
+	pci_write_config_word(bridge, pos + PCI_EXP_DEVCTL2, ctrl);
 
-	dev->ari_enabled = 1;
+	bridge->ari_enabled = 1;
 }
 
 int
@@ -1746,6 +1752,103 @@
 #endif
 
 /**
+ * pci_execute_reset_function() - Reset a PCI device function
+ * @dev: Device function to reset
+ *
+ * Some devices allow an individual function to be reset without affecting
+ * other functions in the same device.  The PCI device must be responsive
+ * to PCI config space in order to use this function.
+ *
+ * The device function is presumed to be unused when this function is called.
+ * Resetting the device will make the contents of PCI configuration space
+ * random, so any caller of this must be prepared to reinitialise the
+ * device including MSI, bus mastering, BARs, decoding IO and memory spaces,
+ * etc.
+ *
+ * Returns 0 if the device function was successfully reset or -ENOTTY if the
+ * device doesn't support resetting a single function.
+ */
+int pci_execute_reset_function(struct pci_dev *dev)
+{
+	u16 status;
+	u32 cap;
+	int exppos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+
+	if (!exppos)
+		return -ENOTTY;
+	pci_read_config_dword(dev, exppos + PCI_EXP_DEVCAP, &cap);
+	if (!(cap & PCI_EXP_DEVCAP_FLR))
+		return -ENOTTY;
+
+	pci_block_user_cfg_access(dev);
+
+	/* Wait for Transaction Pending bit clean */
+	msleep(100);
+	pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status);
+	if (status & PCI_EXP_DEVSTA_TRPND) {
+		dev_info(&dev->dev, "Busy after 100ms while trying to reset; "
+			"sleeping for 1 second\n");
+		ssleep(1);
+		pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status);
+		if (status & PCI_EXP_DEVSTA_TRPND)
+			dev_info(&dev->dev, "Still busy after 1s; "
+				"proceeding with reset anyway\n");
+	}
+
+	pci_write_config_word(dev, exppos + PCI_EXP_DEVCTL,
+				PCI_EXP_DEVCTL_BCR_FLR);
+	mdelay(100);
+
+	pci_unblock_user_cfg_access(dev);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pci_execute_reset_function);
+
+/**
+ * pci_reset_function() - quiesce and reset a PCI device function
+ * @dev: Device function to reset
+ *
+ * Some devices allow an individual function to be reset without affecting
+ * other functions in the same device.  The PCI device must be responsive
+ * to PCI config space in order to use this function.
+ *
+ * This function does not just reset the PCI portion of a device, but
+ * clears all the state associated with the device.  This function differs
+ * from pci_execute_reset_function in that it saves and restores device state
+ * over the reset.
+ *
+ * Returns 0 if the device function was successfully reset or -ENOTTY if the
+ * device doesn't support resetting a single function.
+ */
+int pci_reset_function(struct pci_dev *dev)
+{
+	u32 cap;
+	int exppos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	int r;
+
+	if (!exppos)
+		return -ENOTTY;
+	pci_read_config_dword(dev, exppos + PCI_EXP_DEVCAP, &cap);
+	if (!(cap & PCI_EXP_DEVCAP_FLR))
+		return -ENOTTY;
+
+	if (!dev->msi_enabled && !dev->msix_enabled)
+		disable_irq(dev->irq);
+	pci_save_state(dev);
+
+	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
+
+	r = pci_execute_reset_function(dev);
+
+	pci_restore_state(dev);
+	if (!dev->msi_enabled && !dev->msix_enabled)
+		enable_irq(dev->irq);
+
+	return r;
+}
+EXPORT_SYMBOL_GPL(pci_reset_function);
+
+/**
  * pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count
  * @dev: PCI device to query
  *
@@ -1933,6 +2036,9 @@
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
 		pci_fixup_device(pci_fixup_final, dev);
 	}
+
+	msi_init();
+
 	return 0;
 }
 
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index b205ab8..9de87e9 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -98,9 +98,11 @@
 #ifdef CONFIG_PCI_MSI
 void pci_no_msi(void);
 extern void pci_msi_init_pci_dev(struct pci_dev *dev);
+extern void __devinit msi_init(void);
 #else
 static inline void pci_no_msi(void) { }
 static inline void pci_msi_init_pci_dev(struct pci_dev *dev) { }
+static inline void msi_init(void) { }
 #endif
 
 #ifdef CONFIG_PCIEAER
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index aaaf0a1..003a9b3 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -298,9 +298,6 @@
 			child->resource[i] = child->parent->resource[i - 3];
 	}
 
-	for(i=0; i<3; i++)
-		child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
-
 	res = child->resource[0];
 	pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
 	pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
@@ -480,19 +477,27 @@
 	int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
 	u32 buses, i, j = 0;
 	u16 bctl;
+	int broken = 0;
 
 	pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
 
 	dev_dbg(&dev->dev, "scanning behind bridge, config %06x, pass %d\n",
 		buses & 0xffffff, pass);
 
+	/* Check if setup is sensible at all */
+	if (!pass &&
+	    ((buses & 0xff) != bus->number || ((buses >> 8) & 0xff) <= bus->number)) {
+		dev_dbg(&dev->dev, "bus configuration invalid, reconfiguring\n");
+		broken = 1;
+	}
+
 	/* Disable MasterAbortMode during probing to avoid reporting
 	   of bus errors (in some architectures) */ 
 	pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
 	pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
 			      bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
 
-	if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus) {
+	if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus && !broken) {
 		unsigned int cmax, busnr;
 		/*
 		 * Bus already configured by firmware, process it in the first
@@ -530,7 +535,7 @@
 		 * do in the second pass.
 		 */
 		if (!pass) {
-			if (pcibios_assign_all_busses())
+			if (pcibios_assign_all_busses() || broken)
 				/* Temporarily disable forwarding of the
 				   configuration cycles on all bridges in
 				   this bus segment to avoid possible
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index bbf66ea..96cf8ec 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -43,6 +43,20 @@
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor);
 
+/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
+int forbid_dac __read_mostly;
+EXPORT_SYMBOL(forbid_dac);
+
+static __devinit void via_no_dac(struct pci_dev *dev)
+{
+	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
+		dev_info(&dev->dev,
+			"VIA PCI bridge detected. Disabling DAC.\n");
+		forbid_dac = 1;
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
+
 /* Deal with broken BIOS'es that neglect to enable passive release,
    which can cause problems in combination with the 82441FX/PPro MTRRs */
 static void quirk_passive_release(struct pci_dev *dev)
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index 4edfc47..5af8bd5 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -166,6 +166,7 @@
 {
 	struct pci_dev *pdev;
 
+	pci_dev_get(from);
 	pdev = pci_get_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from);
 	pci_dev_put(pdev);
 	return pdev;
@@ -270,12 +271,8 @@
 	struct pci_dev *pdev = NULL;
 
 	WARN_ON(in_interrupt());
-	if (from) {
-		/* FIXME
-		 * take the cast off, when bus_find_device is made const.
-		 */
-		dev_start = (struct device *)&from->dev;
-	}
+	if (from)
+		dev_start = &from->dev;
 	dev = bus_find_device(&pci_bus_type, dev_start, (void *)id,
 			      match_pci_dev_by_id);
 	if (dev)
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 0c6db03..4dd1c3e 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -78,18 +78,100 @@
 	.default_attrs = pci_slot_default_attrs,
 };
 
+static char *make_slot_name(const char *name)
+{
+	char *new_name;
+	int len, max, dup;
+
+	new_name = kstrdup(name, GFP_KERNEL);
+	if (!new_name)
+		return NULL;
+
+	/*
+	 * Make sure we hit the realloc case the first time through the
+	 * loop.  'len' will be strlen(name) + 3 at that point which is
+	 * enough space for "name-X" and the trailing NUL.
+	 */
+	len = strlen(name) + 2;
+	max = 1;
+	dup = 1;
+
+	for (;;) {
+		struct kobject *dup_slot;
+		dup_slot = kset_find_obj(pci_slots_kset, new_name);
+		if (!dup_slot)
+			break;
+		kobject_put(dup_slot);
+		if (dup == max) {
+			len++;
+			max *= 10;
+			kfree(new_name);
+			new_name = kmalloc(len, GFP_KERNEL);
+			if (!new_name)
+				break;
+		}
+		sprintf(new_name, "%s-%d", name, dup++);
+	}
+
+	return new_name;
+}
+
+static int rename_slot(struct pci_slot *slot, const char *name)
+{
+	int result = 0;
+	char *slot_name;
+
+	if (strcmp(pci_slot_name(slot), name) == 0)
+		return result;
+
+	slot_name = make_slot_name(name);
+	if (!slot_name)
+		return -ENOMEM;
+
+	result = kobject_rename(&slot->kobj, slot_name);
+	kfree(slot_name);
+
+	return result;
+}
+
+static struct pci_slot *get_slot(struct pci_bus *parent, int slot_nr)
+{
+	struct pci_slot *slot;
+	/*
+	 * We already hold pci_bus_sem so don't worry
+	 */
+	list_for_each_entry(slot, &parent->slots, list)
+		if (slot->number == slot_nr) {
+			kobject_get(&slot->kobj);
+			return slot;
+		}
+
+	return NULL;
+}
+
 /**
  * pci_create_slot - create or increment refcount for physical PCI slot
  * @parent: struct pci_bus of parent bridge
  * @slot_nr: PCI_SLOT(pci_dev->devfn) or -1 for placeholder
  * @name: user visible string presented in /sys/bus/pci/slots/<name>
+ * @hotplug: set if caller is hotplug driver, NULL otherwise
  *
  * PCI slots have first class attributes such as address, speed, width,
  * and a &struct pci_slot is used to manage them. This interface will
  * either return a new &struct pci_slot to the caller, or if the pci_slot
  * already exists, its refcount will be incremented.
  *
- * Slots are uniquely identified by a @pci_bus, @slot_nr, @name tuple.
+ * Slots are uniquely identified by a @pci_bus, @slot_nr tuple.
+ *
+ * There are known platforms with broken firmware that assign the same
+ * name to multiple slots. Workaround these broken platforms by renaming
+ * the slots on behalf of the caller. If firmware assigns name N to
+ * multiple slots:
+ *
+ * The first slot is assigned N
+ * The second slot is assigned N-1
+ * The third slot is assigned N-2
+ * etc.
  *
  * Placeholder slots:
  * In most cases, @pci_bus, @slot_nr will be sufficient to uniquely identify
@@ -98,61 +180,67 @@
  * the slot. In this scenario, the caller may pass -1 for @slot_nr.
  *
  * The following semantics are imposed when the caller passes @slot_nr ==
- * -1. First, the check for existing %struct pci_slot is skipped, as the
- * caller may know about several unpopulated slots on a given %struct
- * pci_bus, and each slot would have a @slot_nr of -1.  Uniqueness for
- * these slots is then determined by the @name parameter. We expect
- * kobject_init_and_add() to warn us if the caller attempts to create
- * multiple slots with the same name. The other change in semantics is
+ * -1. First, we no longer check for an existing %struct pci_slot, as there
+ * may be many slots with @slot_nr of -1.  The other change in semantics is
  * user-visible, which is the 'address' parameter presented in sysfs will
  * consist solely of a dddd:bb tuple, where dddd is the PCI domain of the
  * %struct pci_bus and bb is the bus number. In other words, the devfn of
  * the 'placeholder' slot will not be displayed.
  */
-
 struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
-				 const char *name)
+				 const char *name,
+				 struct hotplug_slot *hotplug)
 {
 	struct pci_dev *dev;
 	struct pci_slot *slot;
-	int err;
+	int err = 0;
+	char *slot_name = NULL;
 
 	down_write(&pci_bus_sem);
 
 	if (slot_nr == -1)
 		goto placeholder;
 
-	/* If we've already created this slot, bump refcount and return. */
-	list_for_each_entry(slot, &parent->slots, list) {
-		if (slot->number == slot_nr) {
-			kobject_get(&slot->kobj);
-			pr_debug("%s: inc refcount to %d on %04x:%02x:%02x\n",
-				 __func__,
-				 atomic_read(&slot->kobj.kref.refcount),
-				 pci_domain_nr(parent), parent->number,
-				 slot_nr);
-			goto out;
+	/*
+	 * Hotplug drivers are allowed to rename an existing slot,
+	 * but only if not already claimed.
+	 */
+	slot = get_slot(parent, slot_nr);
+	if (slot) {
+		if (hotplug) {
+			if ((err = slot->hotplug ? -EBUSY : 0)
+			     || (err = rename_slot(slot, name))) {
+				kobject_put(&slot->kobj);
+				slot = NULL;
+				goto err;
+			}
 		}
+		goto out;
 	}
 
 placeholder:
 	slot = kzalloc(sizeof(*slot), GFP_KERNEL);
 	if (!slot) {
-		slot = ERR_PTR(-ENOMEM);
-		goto out;
+		err = -ENOMEM;
+		goto err;
 	}
 
 	slot->bus = parent;
 	slot->number = slot_nr;
 
 	slot->kobj.kset = pci_slots_kset;
-	err = kobject_init_and_add(&slot->kobj, &pci_slot_ktype, NULL,
-				   "%s", name);
-	if (err) {
-		printk(KERN_ERR "Unable to register kobject %s\n", name);
+
+	slot_name = make_slot_name(name);
+	if (!slot_name) {
+		err = -ENOMEM;
 		goto err;
 	}
 
+	err = kobject_init_and_add(&slot->kobj, &pci_slot_ktype, NULL,
+				   "%s", slot_name);
+	if (err)
+		goto err;
+
 	INIT_LIST_HEAD(&slot->list);
 	list_add(&slot->list, &parent->slots);
 
@@ -164,10 +252,10 @@
 	pr_debug("%s: created pci_slot on %04x:%02x:%02x\n",
 		 __func__, pci_domain_nr(parent), parent->number, slot_nr);
 
- out:
+out:
 	up_write(&pci_bus_sem);
 	return slot;
- err:
+err:
 	kfree(slot);
 	slot = ERR_PTR(err);
 	goto out;
@@ -175,7 +263,7 @@
 EXPORT_SYMBOL_GPL(pci_create_slot);
 
 /**
- * pci_update_slot_number - update %struct pci_slot -> number
+ * pci_renumber_slot - update %struct pci_slot -> number
  * @slot - %struct pci_slot to update
  * @slot_nr - new number for slot
  *
@@ -183,27 +271,22 @@
  * created a placeholder slot in pci_create_slot() by passing a -1 as
  * slot_nr, to update their %struct pci_slot with the correct @slot_nr.
  */
-
-void pci_update_slot_number(struct pci_slot *slot, int slot_nr)
+void pci_renumber_slot(struct pci_slot *slot, int slot_nr)
 {
-	int name_count = 0;
 	struct pci_slot *tmp;
 
 	down_write(&pci_bus_sem);
 
 	list_for_each_entry(tmp, &slot->bus->slots, list) {
 		WARN_ON(tmp->number == slot_nr);
-		if (!strcmp(kobject_name(&tmp->kobj), kobject_name(&slot->kobj)))
-			name_count++;
+		goto out;
 	}
 
-	if (name_count > 1)
-		printk(KERN_WARNING "pci_update_slot_number found %d slots with the same name: %s\n", name_count, kobject_name(&slot->kobj));
-
 	slot->number = slot_nr;
+out:
 	up_write(&pci_bus_sem);
 }
-EXPORT_SYMBOL_GPL(pci_update_slot_number);
+EXPORT_SYMBOL_GPL(pci_renumber_slot);
 
 /**
  * pci_destroy_slot - decrement refcount for physical PCI slot
@@ -213,7 +296,6 @@
  * just call kobject_put on its kobj and let our release methods do the
  * rest.
  */
-
 void pci_destroy_slot(struct pci_slot *slot)
 {
 	pr_debug("%s: dec refcount to %d on %04x:%02x:%02x\n", __func__,
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index b46c60b..23e492b 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -70,7 +70,7 @@
 pxa2xx-obj-$(CONFIG_PXA_SHARPSL)		+= pxa2xx_sharpsl.o
 pxa2xx-obj-$(CONFIG_MACH_ARMCORE)		+= pxa2xx_cm_x2xx_cs.o
 pxa2xx-obj-$(CONFIG_ARCH_VIPER)			+= pxa2xx_viper.o
-pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps.o
+pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps4.o
 pxa2xx-obj-$(CONFIG_MACH_PALMTX)		+= pxa2xx_palmtx.o
 pxa2xx-obj-$(CONFIG_MACH_PALMLD)		+= pxa2xx_palmld.o
 
diff --git a/drivers/pnp/Kconfig b/drivers/pnp/Kconfig
index 821933f..2a37b3f 100644
--- a/drivers/pnp/Kconfig
+++ b/drivers/pnp/Kconfig
@@ -20,13 +20,21 @@
 
 	  If unsure, say Y.
 
-if PNP
-
-config PNP_DEBUG
-	bool "PnP Debug Messages"
+config PNP_DEBUG_MESSAGES
+	default y
+	bool "PNP debugging messages"
+	depends on PNP
 	help
-	  Say Y if you want the Plug and Play Layer to print debug messages.
-	  This is useful if you are developing a PnP driver or troubleshooting.
+	  Say Y here if you want the PNP layer to be able to produce debugging
+	  messages if needed.  The messages can be enabled at boot-time with
+	  the pnp.debug kernel parameter.
+
+	  This option allows you to save a bit of space if you do not want
+	  the messages to even be built into the kernel.
+
+	  If you have any doubts about this, say Y here.
+
+if PNP
 
 comment "Protocols"
 
diff --git a/drivers/pnp/Makefile b/drivers/pnp/Makefile
index e83f34f..8de3775 100644
--- a/drivers/pnp/Makefile
+++ b/drivers/pnp/Makefile
@@ -10,7 +10,3 @@
 
 # pnp_system_init goes after pnpacpi/pnpbios init
 obj-y				+= system.o
-
-ifeq ($(CONFIG_PNP_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h
index 3b8b9d3..0b8d140 100644
--- a/drivers/pnp/base.h
+++ b/drivers/pnp/base.h
@@ -166,3 +166,13 @@
 struct pnp_resource *pnp_add_mem_resource(struct pnp_dev *dev,
 					  resource_size_t start,
 					  resource_size_t end, int flags);
+
+extern int pnp_debug;
+
+#if defined(CONFIG_PNP_DEBUG_MESSAGES)
+#define pnp_dbg(dev, format, arg...)					\
+	({ if (pnp_debug) dev_printk(KERN_DEBUG, dev, format, ## arg); 0; })
+#else
+#define pnp_dbg(dev, format, arg...)					\
+	({ if (0) dev_printk(KERN_DEBUG, dev, format, ## arg); 0; })
+#endif
diff --git a/drivers/pnp/core.c b/drivers/pnp/core.c
index 817fe62..16c01c6 100644
--- a/drivers/pnp/core.c
+++ b/drivers/pnp/core.c
@@ -177,6 +177,9 @@
 int pnp_add_device(struct pnp_dev *dev)
 {
 	int ret;
+	char buf[128];
+	int len = 0;
+	struct pnp_id *id;
 
 	if (dev->card)
 		return -EINVAL;
@@ -185,17 +188,12 @@
 	if (ret)
 		return ret;
 
-#ifdef CONFIG_PNP_DEBUG
-	{
-		struct pnp_id *id;
+	buf[0] = '\0';
+	for (id = dev->id; id; id = id->next)
+		len += scnprintf(buf + len, sizeof(buf) - len, " %s", id->id);
 
-		dev_printk(KERN_DEBUG, &dev->dev, "%s device, IDs",
-			dev->protocol->name);
-		for (id = dev->id; id; id = id->next)
-			printk(" %s", id->id);
-		printk(" (%s)\n", dev->active ? "active" : "disabled");
-	}
-#endif
+	pnp_dbg(&dev->dev, "%s device, IDs%s (%s)\n",
+		dev->protocol->name, buf, dev->active ? "active" : "disabled");
 	return 0;
 }
 
@@ -214,3 +212,14 @@
 }
 
 subsys_initcall(pnp_init);
+
+int pnp_debug;
+
+#if defined(CONFIG_PNP_DEBUG_MESSAGES)
+static int __init pnp_debug_setup(char *__unused)
+{
+	pnp_debug = 1;
+	return 1;
+}
+__setup("pnp.debug", pnp_debug_setup);
+#endif
diff --git a/drivers/pnp/driver.c b/drivers/pnp/driver.c
index e3f7e89..527ee76 100644
--- a/drivers/pnp/driver.c
+++ b/drivers/pnp/driver.c
@@ -114,7 +114,6 @@
 	} else
 		goto fail;
 
-	dev_dbg(dev, "driver attached\n");
 	return error;
 
 fail:
@@ -211,8 +210,6 @@
 
 int pnp_register_driver(struct pnp_driver *drv)
 {
-	pnp_dbg("the driver '%s' has been registered", drv->name);
-
 	drv->driver.name = drv->name;
 	drv->driver.bus = &pnp_bus_type;
 
@@ -222,7 +219,6 @@
 void pnp_unregister_driver(struct pnp_driver *drv)
 {
 	driver_unregister(&drv->driver);
-	pnp_dbg("the driver '%s' has been unregistered", drv->name);
 }
 
 /**
diff --git a/drivers/pnp/isapnp/Makefile b/drivers/pnp/isapnp/Makefile
index 3e38f06..cac18bb 100644
--- a/drivers/pnp/isapnp/Makefile
+++ b/drivers/pnp/isapnp/Makefile
@@ -5,7 +5,3 @@
 isapnp-proc-$(CONFIG_PROC_FS) = proc.o
 
 obj-y := core.o compat.o $(isapnp-proc-y)
-
-ifeq ($(CONFIG_PNP_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c
index 46455fba..e851160 100644
--- a/drivers/pnp/isapnp/core.c
+++ b/drivers/pnp/isapnp/core.c
@@ -901,7 +901,7 @@
 {
 	int i, ret;
 
-	dev_dbg(&dev->dev, "get resources\n");
+	pnp_dbg(&dev->dev, "get resources\n");
 	pnp_init_resources(dev);
 	isapnp_cfg_begin(dev->card->number, dev->number);
 	dev->active = isapnp_read_byte(ISAPNP_CFG_ACTIVATE);
@@ -939,13 +939,13 @@
 	struct resource *res;
 	int tmp;
 
-	dev_dbg(&dev->dev, "set resources\n");
+	pnp_dbg(&dev->dev, "set resources\n");
 	isapnp_cfg_begin(dev->card->number, dev->number);
 	dev->active = 1;
 	for (tmp = 0; tmp < ISAPNP_MAX_PORT; tmp++) {
 		res = pnp_get_resource(dev, IORESOURCE_IO, tmp);
 		if (pnp_resource_enabled(res)) {
-			dev_dbg(&dev->dev, "  set io  %d to %#llx\n",
+			pnp_dbg(&dev->dev, "  set io  %d to %#llx\n",
 				tmp, (unsigned long long) res->start);
 			isapnp_write_word(ISAPNP_CFG_PORT + (tmp << 1),
 					  res->start);
@@ -957,14 +957,14 @@
 			int irq = res->start;
 			if (irq == 2)
 				irq = 9;
-			dev_dbg(&dev->dev, "  set irq %d to %d\n", tmp, irq);
+			pnp_dbg(&dev->dev, "  set irq %d to %d\n", tmp, irq);
 			isapnp_write_byte(ISAPNP_CFG_IRQ + (tmp << 1), irq);
 		}
 	}
 	for (tmp = 0; tmp < ISAPNP_MAX_DMA; tmp++) {
 		res = pnp_get_resource(dev, IORESOURCE_DMA, tmp);
 		if (pnp_resource_enabled(res)) {
-			dev_dbg(&dev->dev, "  set dma %d to %lld\n",
+			pnp_dbg(&dev->dev, "  set dma %d to %lld\n",
 				tmp, (unsigned long long) res->start);
 			isapnp_write_byte(ISAPNP_CFG_DMA + tmp, res->start);
 		}
@@ -972,7 +972,7 @@
 	for (tmp = 0; tmp < ISAPNP_MAX_MEM; tmp++) {
 		res = pnp_get_resource(dev, IORESOURCE_MEM, tmp);
 		if (pnp_resource_enabled(res)) {
-			dev_dbg(&dev->dev, "  set mem %d to %#llx\n",
+			pnp_dbg(&dev->dev, "  set mem %d to %#llx\n",
 				tmp, (unsigned long long) res->start);
 			isapnp_write_word(ISAPNP_CFG_MEM + (tmp << 3),
 					  (res->start >> 8) & 0xffff);
diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c
index b526eaa..00fd3577 100644
--- a/drivers/pnp/manager.c
+++ b/drivers/pnp/manager.c
@@ -25,7 +25,7 @@
 
 	res = pnp_get_resource(dev, IORESOURCE_IO, idx);
 	if (res) {
-		dev_dbg(&dev->dev, "  io %d already set to %#llx-%#llx "
+		pnp_dbg(&dev->dev, "  io %d already set to %#llx-%#llx "
 			"flags %#lx\n", idx, (unsigned long long) res->start,
 			(unsigned long long) res->end, res->flags);
 		return 0;
@@ -38,7 +38,7 @@
 
 	if (!rule->size) {
 		res->flags |= IORESOURCE_DISABLED;
-		dev_dbg(&dev->dev, "  io %d disabled\n", idx);
+		pnp_dbg(&dev->dev, "  io %d disabled\n", idx);
 		goto __add;
 	}
 
@@ -49,7 +49,7 @@
 		res->start += rule->align;
 		res->end = res->start + rule->size - 1;
 		if (res->start > rule->max || !rule->align) {
-			dev_dbg(&dev->dev, "  couldn't assign io %d "
+			pnp_dbg(&dev->dev, "  couldn't assign io %d "
 				"(min %#llx max %#llx)\n", idx,
 				(unsigned long long) rule->min,
 				(unsigned long long) rule->max);
@@ -68,7 +68,7 @@
 
 	res = pnp_get_resource(dev, IORESOURCE_MEM, idx);
 	if (res) {
-		dev_dbg(&dev->dev, "  mem %d already set to %#llx-%#llx "
+		pnp_dbg(&dev->dev, "  mem %d already set to %#llx-%#llx "
 			"flags %#lx\n", idx, (unsigned long long) res->start,
 			(unsigned long long) res->end, res->flags);
 		return 0;
@@ -90,7 +90,7 @@
 
 	if (!rule->size) {
 		res->flags |= IORESOURCE_DISABLED;
-		dev_dbg(&dev->dev, "  mem %d disabled\n", idx);
+		pnp_dbg(&dev->dev, "  mem %d disabled\n", idx);
 		goto __add;
 	}
 
@@ -101,7 +101,7 @@
 		res->start += rule->align;
 		res->end = res->start + rule->size - 1;
 		if (res->start > rule->max || !rule->align) {
-			dev_dbg(&dev->dev, "  couldn't assign mem %d "
+			pnp_dbg(&dev->dev, "  couldn't assign mem %d "
 				"(min %#llx max %#llx)\n", idx,
 				(unsigned long long) rule->min,
 				(unsigned long long) rule->max);
@@ -126,7 +126,7 @@
 
 	res = pnp_get_resource(dev, IORESOURCE_IRQ, idx);
 	if (res) {
-		dev_dbg(&dev->dev, "  irq %d already set to %d flags %#lx\n",
+		pnp_dbg(&dev->dev, "  irq %d already set to %d flags %#lx\n",
 			idx, (int) res->start, res->flags);
 		return 0;
 	}
@@ -138,7 +138,7 @@
 
 	if (bitmap_empty(rule->map.bits, PNP_IRQ_NR)) {
 		res->flags |= IORESOURCE_DISABLED;
-		dev_dbg(&dev->dev, "  irq %d disabled\n", idx);
+		pnp_dbg(&dev->dev, "  irq %d disabled\n", idx);
 		goto __add;
 	}
 
@@ -160,11 +160,11 @@
 		res->start = -1;
 		res->end = -1;
 		res->flags |= IORESOURCE_DISABLED;
-		dev_dbg(&dev->dev, "  irq %d disabled (optional)\n", idx);
+		pnp_dbg(&dev->dev, "  irq %d disabled (optional)\n", idx);
 		goto __add;
 	}
 
-	dev_dbg(&dev->dev, "  couldn't assign irq %d\n", idx);
+	pnp_dbg(&dev->dev, "  couldn't assign irq %d\n", idx);
 	return -EBUSY;
 
 __add:
@@ -184,7 +184,7 @@
 
 	res = pnp_get_resource(dev, IORESOURCE_DMA, idx);
 	if (res) {
-		dev_dbg(&dev->dev, "  dma %d already set to %d flags %#lx\n",
+		pnp_dbg(&dev->dev, "  dma %d already set to %d flags %#lx\n",
 			idx, (int) res->start, res->flags);
 		return 0;
 	}
@@ -205,7 +205,7 @@
 	res->start = res->end = MAX_DMA_CHANNELS;
 #endif
 	res->flags |= IORESOURCE_DISABLED;
-	dev_dbg(&dev->dev, "  disable dma %d\n", idx);
+	pnp_dbg(&dev->dev, "  disable dma %d\n", idx);
 
 __add:
 	pnp_add_dma_resource(dev, res->start, res->flags);
@@ -238,7 +238,7 @@
 	int nport = 0, nmem = 0, nirq = 0, ndma = 0;
 	int ret = 0;
 
-	dev_dbg(&dev->dev, "pnp_assign_resources, try dependent set %d\n", set);
+	pnp_dbg(&dev->dev, "pnp_assign_resources, try dependent set %d\n", set);
 	mutex_lock(&pnp_res_mutex);
 	pnp_clean_resource_table(dev);
 
@@ -270,7 +270,7 @@
 
 	mutex_unlock(&pnp_res_mutex);
 	if (ret < 0) {
-		dev_dbg(&dev->dev, "pnp_assign_resources failed (%d)\n", ret);
+		pnp_dbg(&dev->dev, "pnp_assign_resources failed (%d)\n", ret);
 		pnp_clean_resource_table(dev);
 	} else
 		dbg_pnp_show_resources(dev, "pnp_assign_resources succeeded");
@@ -286,7 +286,7 @@
 	int i, ret;
 
 	if (!pnp_can_configure(dev)) {
-		dev_dbg(&dev->dev, "configuration not supported\n");
+		pnp_dbg(&dev->dev, "configuration not supported\n");
 		return -ENODEV;
 	}
 
@@ -313,7 +313,7 @@
 int pnp_start_dev(struct pnp_dev *dev)
 {
 	if (!pnp_can_write(dev)) {
-		dev_dbg(&dev->dev, "activation not supported\n");
+		pnp_dbg(&dev->dev, "activation not supported\n");
 		return -EINVAL;
 	}
 
@@ -336,7 +336,7 @@
 int pnp_stop_dev(struct pnp_dev *dev)
 {
 	if (!pnp_can_disable(dev)) {
-		dev_dbg(&dev->dev, "disabling not supported\n");
+		pnp_dbg(&dev->dev, "disabling not supported\n");
 		return -EINVAL;
 	}
 	if (dev->protocol->disable(dev) < 0) {
diff --git a/drivers/pnp/pnpacpi/Makefile b/drivers/pnp/pnpacpi/Makefile
index 2d7a1e6..905326f 100644
--- a/drivers/pnp/pnpacpi/Makefile
+++ b/drivers/pnp/pnpacpi/Makefile
@@ -3,7 +3,3 @@
 #
 
 obj-y := core.o rsparser.o
-
-ifeq ($(CONFIG_PNP_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index 53561d7..383e47c 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -75,7 +75,7 @@
 
 static int pnpacpi_get_resources(struct pnp_dev *dev)
 {
-	dev_dbg(&dev->dev, "get resources\n");
+	pnp_dbg(&dev->dev, "get resources\n");
 	return pnpacpi_parse_allocated_resource(dev);
 }
 
@@ -86,7 +86,7 @@
 	int ret;
 	acpi_status status;
 
-	dev_dbg(&dev->dev, "set resources\n");
+	pnp_dbg(&dev->dev, "set resources\n");
 	ret = pnpacpi_build_resource_template(dev, &buffer);
 	if (ret)
 		return ret;
@@ -148,9 +148,13 @@
 	acpi_status status;
 	struct pnp_dev *dev;
 
+	/*
+	 * If a PnPacpi device is not present , the device
+	 * driver should not be loaded.
+	 */
 	status = acpi_get_handle(device->handle, "_CRS", &temp);
 	if (ACPI_FAILURE(status) || !ispnpidacpi(acpi_device_hid(device)) ||
-	    is_exclusive_device(device))
+	    is_exclusive_device(device) || (!device->status.present))
 		return 0;
 
 	dev = pnp_alloc_dev(&pnpacpi_protocol, num, acpi_device_hid(device));
@@ -255,14 +259,14 @@
 static int __init pnpacpi_init(void)
 {
 	if (acpi_disabled || pnpacpi_disabled) {
-		pnp_info("PnP ACPI: disabled");
+		printk(KERN_INFO "pnp: PnP ACPI: disabled\n");
 		return 0;
 	}
-	pnp_info("PnP ACPI init");
+	printk(KERN_INFO "pnp: PnP ACPI init\n");
 	pnp_register_protocol(&pnpacpi_protocol);
 	register_acpi_bus_type(&acpi_pnp_bus);
 	acpi_get_devices(NULL, pnpacpi_add_device_handler, NULL, NULL);
-	pnp_info("PnP ACPI: found %d devices", num);
+	printk(KERN_INFO "pnp: PnP ACPI: found %d devices\n", num);
 	unregister_acpi_bus_type(&acpi_pnp_bus);
 	pnp_platform_devices = 1;
 	return 0;
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 95015cb..adf1785 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -132,7 +132,8 @@
 	pnp_add_irq_resource(dev, irq, flags);
 }
 
-static int dma_flags(int type, int bus_master, int transfer)
+static int dma_flags(struct pnp_dev *dev, int type, int bus_master,
+		     int transfer)
 {
 	int flags = 0;
 
@@ -154,7 +155,7 @@
 	default:
 		/* Set a default value ? */
 		flags |= IORESOURCE_DMA_COMPATIBLE;
-		pnp_err("Invalid DMA type");
+		dev_err(&dev->dev, "invalid DMA type %d\n", type);
 	}
 	switch (transfer) {
 	case ACPI_TRANSFER_8:
@@ -169,7 +170,7 @@
 	default:
 		/* Set a default value ? */
 		flags |= IORESOURCE_DMA_8AND16BIT;
-		pnp_err("Invalid DMA transfer type");
+		dev_err(&dev->dev, "invalid DMA transfer type %d\n", transfer);
 	}
 
 	return flags;
@@ -336,7 +337,7 @@
 	case ACPI_RESOURCE_TYPE_DMA:
 		dma = &res->data.dma;
 		if (dma->channel_count > 0 && dma->channels[0] != (u8) -1)
-			flags = dma_flags(dma->type, dma->bus_master,
+			flags = dma_flags(dev, dma->type, dma->bus_master,
 					  dma->transfer);
 		else
 			flags = IORESOURCE_DISABLED;
@@ -449,7 +450,7 @@
 	acpi_handle handle = dev->data;
 	acpi_status status;
 
-	dev_dbg(&dev->dev, "parse allocated resources\n");
+	pnp_dbg(&dev->dev, "parse allocated resources\n");
 
 	pnp_init_resources(dev);
 
@@ -477,7 +478,7 @@
 	for (i = 0; i < p->channel_count; i++)
 		map |= 1 << p->channels[i];
 
-	flags = dma_flags(p->type, p->bus_master, p->transfer);
+	flags = dma_flags(dev, p->type, p->bus_master, p->transfer);
 	pnp_register_dma_resource(dev, option_flags, map, flags);
 }
 
@@ -608,8 +609,8 @@
 	unsigned char flags = 0;
 
 	status = acpi_resource_to_address64(r, p);
-	if (!ACPI_SUCCESS(status)) {
-		pnp_warn("PnPACPI: failed to convert resource type %d",
+	if (ACPI_FAILURE(status)) {
+		dev_warn(&dev->dev, "can't convert resource type %d\n",
 			 r->type);
 		return;
 	}
@@ -735,7 +736,7 @@
 	acpi_status status;
 	struct acpipnp_parse_option_s parse_data;
 
-	dev_dbg(&dev->dev, "parse resource options\n");
+	pnp_dbg(&dev->dev, "parse resource options\n");
 
 	parse_data.dev = dev;
 	parse_data.option_flags = 0;
@@ -843,7 +844,7 @@
 
 	if (!pnp_resource_enabled(p)) {
 		irq->interrupt_count = 0;
-		dev_dbg(&dev->dev, "  encode irq (%s)\n",
+		pnp_dbg(&dev->dev, "  encode irq (%s)\n",
 			p ? "disabled" : "missing");
 		return;
 	}
@@ -855,7 +856,7 @@
 	irq->interrupt_count = 1;
 	irq->interrupts[0] = p->start;
 
-	dev_dbg(&dev->dev, "  encode irq %d %s %s %s (%d-byte descriptor)\n",
+	pnp_dbg(&dev->dev, "  encode irq %d %s %s %s (%d-byte descriptor)\n",
 		(int) p->start,
 		triggering == ACPI_LEVEL_SENSITIVE ? "level" : "edge",
 		polarity == ACPI_ACTIVE_LOW ? "low" : "high",
@@ -872,7 +873,7 @@
 
 	if (!pnp_resource_enabled(p)) {
 		extended_irq->interrupt_count = 0;
-		dev_dbg(&dev->dev, "  encode extended irq (%s)\n",
+		pnp_dbg(&dev->dev, "  encode extended irq (%s)\n",
 			p ? "disabled" : "missing");
 		return;
 	}
@@ -885,7 +886,7 @@
 	extended_irq->interrupt_count = 1;
 	extended_irq->interrupts[0] = p->start;
 
-	dev_dbg(&dev->dev, "  encode irq %d %s %s %s\n", (int) p->start,
+	pnp_dbg(&dev->dev, "  encode irq %d %s %s %s\n", (int) p->start,
 		triggering == ACPI_LEVEL_SENSITIVE ? "level" : "edge",
 		polarity == ACPI_ACTIVE_LOW ? "low" : "high",
 		extended_irq->sharable == ACPI_SHARED ? "shared" : "exclusive");
@@ -899,7 +900,7 @@
 
 	if (!pnp_resource_enabled(p)) {
 		dma->channel_count = 0;
-		dev_dbg(&dev->dev, "  encode dma (%s)\n",
+		pnp_dbg(&dev->dev, "  encode dma (%s)\n",
 			p ? "disabled" : "missing");
 		return;
 	}
@@ -934,7 +935,7 @@
 	dma->channel_count = 1;
 	dma->channels[0] = p->start;
 
-	dev_dbg(&dev->dev, "  encode dma %d "
+	pnp_dbg(&dev->dev, "  encode dma %d "
 		"type %#x transfer %#x master %d\n",
 		(int) p->start, dma->type, dma->transfer, dma->bus_master);
 }
@@ -958,7 +959,7 @@
 		io->address_length = 0;
 	}
 
-	dev_dbg(&dev->dev, "  encode io %#x-%#x decode %#x\n", io->minimum,
+	pnp_dbg(&dev->dev, "  encode io %#x-%#x decode %#x\n", io->minimum,
 		io->minimum + io->address_length - 1, io->io_decode);
 }
 
@@ -976,7 +977,7 @@
 		fixed_io->address_length = 0;
 	}
 
-	dev_dbg(&dev->dev, "  encode fixed_io %#x-%#x\n", fixed_io->address,
+	pnp_dbg(&dev->dev, "  encode fixed_io %#x-%#x\n", fixed_io->address,
 		fixed_io->address + fixed_io->address_length - 1);
 }
 
@@ -999,7 +1000,7 @@
 		memory24->address_length = 0;
 	}
 
-	dev_dbg(&dev->dev, "  encode mem24 %#x-%#x write_protect %#x\n",
+	pnp_dbg(&dev->dev, "  encode mem24 %#x-%#x write_protect %#x\n",
 		memory24->minimum,
 		memory24->minimum + memory24->address_length - 1,
 		memory24->write_protect);
@@ -1023,7 +1024,7 @@
 		memory32->alignment = 0;
 	}
 
-	dev_dbg(&dev->dev, "  encode mem32 %#x-%#x write_protect %#x\n",
+	pnp_dbg(&dev->dev, "  encode mem32 %#x-%#x write_protect %#x\n",
 		memory32->minimum,
 		memory32->minimum + memory32->address_length - 1,
 		memory32->write_protect);
@@ -1046,7 +1047,7 @@
 		fixed_memory32->address_length = 0;
 	}
 
-	dev_dbg(&dev->dev, "  encode fixed_mem32 %#x-%#x write_protect %#x\n",
+	pnp_dbg(&dev->dev, "  encode fixed_mem32 %#x-%#x write_protect %#x\n",
 		fixed_memory32->address,
 		fixed_memory32->address + fixed_memory32->address_length - 1,
 		fixed_memory32->write_protect);
@@ -1060,7 +1061,7 @@
 	struct acpi_resource *resource = buffer->pointer;
 	int port = 0, irq = 0, dma = 0, mem = 0;
 
-	dev_dbg(&dev->dev, "encode %d resources\n", res_cnt);
+	pnp_dbg(&dev->dev, "encode %d resources\n", res_cnt);
 	while (i < res_cnt) {
 		switch (resource->type) {
 		case ACPI_RESOURCE_TYPE_IRQ:
diff --git a/drivers/pnp/pnpbios/Makefile b/drivers/pnp/pnpbios/Makefile
index 310e2b3..3cd3ed7 100644
--- a/drivers/pnp/pnpbios/Makefile
+++ b/drivers/pnp/pnpbios/Makefile
@@ -5,7 +5,3 @@
 pnpbios-proc-$(CONFIG_PNPBIOS_PROC_FS) = proc.o
 
 obj-y := core.o bioscalls.o rsparser.o $(pnpbios-proc-y)
-
-ifeq ($(CONFIG_PNP_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
diff --git a/drivers/pnp/pnpbios/core.c b/drivers/pnp/pnpbios/core.c
index 2bfe133..996f648 100644
--- a/drivers/pnp/pnpbios/core.c
+++ b/drivers/pnp/pnpbios/core.c
@@ -211,7 +211,7 @@
 	if (!pnpbios_is_dynamic(dev))
 		return -EPERM;
 
-	dev_dbg(&dev->dev, "get resources\n");
+	pnp_dbg(&dev->dev, "get resources\n");
 	node = kzalloc(node_info.max_node_size, GFP_KERNEL);
 	if (!node)
 		return -1;
@@ -234,7 +234,7 @@
 	if (!pnpbios_is_dynamic(dev))
 		return -EPERM;
 
-	dev_dbg(&dev->dev, "set resources\n");
+	pnp_dbg(&dev->dev, "set resources\n");
 	node = kzalloc(node_info.max_node_size, GFP_KERNEL);
 	if (!node)
 		return -1;
diff --git a/drivers/pnp/pnpbios/rsparser.c b/drivers/pnp/pnpbios/rsparser.c
index ca56767..87b4f49 100644
--- a/drivers/pnp/pnpbios/rsparser.c
+++ b/drivers/pnp/pnpbios/rsparser.c
@@ -87,7 +87,7 @@
 	if (!p)
 		return NULL;
 
-	dev_dbg(&dev->dev, "parse allocated resources\n");
+	pnp_dbg(&dev->dev, "parse allocated resources\n");
 
 	pnp_init_resources(dev);
 
@@ -324,7 +324,7 @@
 	if (!p)
 		return NULL;
 
-	dev_dbg(&dev->dev, "parse resource options\n");
+	pnp_dbg(&dev->dev, "parse resource options\n");
 	option_flags = 0;
 	while ((char *)p < (char *)end) {
 
@@ -519,7 +519,7 @@
 	p[10] = (len >> 8) & 0xff;
 	p[11] = ((len >> 8) >> 8) & 0xff;
 
-	dev_dbg(&dev->dev, "  encode mem %#lx-%#lx\n", base, base + len - 1);
+	pnp_dbg(&dev->dev, "  encode mem %#lx-%#lx\n", base, base + len - 1);
 }
 
 static void pnpbios_encode_mem32(struct pnp_dev *dev, unsigned char *p,
@@ -549,7 +549,7 @@
 	p[18] = (len >> 16) & 0xff;
 	p[19] = (len >> 24) & 0xff;
 
-	dev_dbg(&dev->dev, "  encode mem32 %#lx-%#lx\n", base, base + len - 1);
+	pnp_dbg(&dev->dev, "  encode mem32 %#lx-%#lx\n", base, base + len - 1);
 }
 
 static void pnpbios_encode_fixed_mem32(struct pnp_dev *dev, unsigned char *p,
@@ -575,7 +575,7 @@
 	p[10] = (len >> 16) & 0xff;
 	p[11] = (len >> 24) & 0xff;
 
-	dev_dbg(&dev->dev, "  encode fixed_mem32 %#lx-%#lx\n", base,
+	pnp_dbg(&dev->dev, "  encode fixed_mem32 %#lx-%#lx\n", base,
 		base + len - 1);
 }
 
@@ -592,7 +592,7 @@
 	p[1] = map & 0xff;
 	p[2] = (map >> 8) & 0xff;
 
-	dev_dbg(&dev->dev, "  encode irq mask %#lx\n", map);
+	pnp_dbg(&dev->dev, "  encode irq mask %#lx\n", map);
 }
 
 static void pnpbios_encode_dma(struct pnp_dev *dev, unsigned char *p,
@@ -607,7 +607,7 @@
 
 	p[1] = map & 0xff;
 
-	dev_dbg(&dev->dev, "  encode dma mask %#lx\n", map);
+	pnp_dbg(&dev->dev, "  encode dma mask %#lx\n", map);
 }
 
 static void pnpbios_encode_port(struct pnp_dev *dev, unsigned char *p,
@@ -630,7 +630,7 @@
 	p[5] = (base >> 8) & 0xff;
 	p[7] = len & 0xff;
 
-	dev_dbg(&dev->dev, "  encode io %#lx-%#lx\n", base, base + len - 1);
+	pnp_dbg(&dev->dev, "  encode io %#lx-%#lx\n", base, base + len - 1);
 }
 
 static void pnpbios_encode_fixed_port(struct pnp_dev *dev, unsigned char *p,
@@ -651,7 +651,7 @@
 	p[2] = (base >> 8) & 0xff;
 	p[3] = len & 0xff;
 
-	dev_dbg(&dev->dev, "  encode fixed_io %#lx-%#lx\n", base,
+	pnp_dbg(&dev->dev, "  encode fixed_io %#lx-%#lx\n", base,
 		base + len - 1);
 }
 
diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
index c144bd5..8473fe5 100644
--- a/drivers/pnp/quirks.c
+++ b/drivers/pnp/quirks.c
@@ -337,9 +337,8 @@
 	for (f = pnp_fixups; *f->id; f++) {
 		if (!compare_pnp_id(dev->id, f->id))
 			continue;
-#ifdef DEBUG
-		dev_dbg(&dev->dev, "%s: calling %pF\n", f->id, f->quirk_function);
-#endif
+		pnp_dbg(&dev->dev, "%s: calling %pF\n", f->id,
+			f->quirk_function);
 		f->quirk_function(dev);
 	}
 }
diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c
index dbae23a..f604061 100644
--- a/drivers/pnp/resource.c
+++ b/drivers/pnp/resource.c
@@ -294,7 +294,7 @@
 	u8 progif;
 
 	if (pci->irq == irq) {
-		dev_dbg(&pnp->dev, "device %s using irq %d\n",
+		pnp_dbg(&pnp->dev, "  device %s using irq %d\n",
 			pci_name(pci), irq);
 		return 1;
 	}
@@ -316,7 +316,7 @@
 		if ((progif & 0x5) != 0x5)
 			if (pci_get_legacy_ide_irq(pci, 0) == irq ||
 			    pci_get_legacy_ide_irq(pci, 1) == irq) {
-				dev_dbg(&pnp->dev, "legacy IDE device %s "
+				pnp_dbg(&pnp->dev, "  legacy IDE device %s "
 					"using irq %d\n", pci_name(pci), irq);
 				return 1;
 			}
@@ -517,7 +517,7 @@
 	res->start = irq;
 	res->end = irq;
 
-	dev_dbg(&dev->dev, "  add irq %d flags %#x\n", irq, flags);
+	pnp_dbg(&dev->dev, "  add irq %d flags %#x\n", irq, flags);
 	return pnp_res;
 }
 
@@ -538,7 +538,7 @@
 	res->start = dma;
 	res->end = dma;
 
-	dev_dbg(&dev->dev, "  add dma %d flags %#x\n", dma, flags);
+	pnp_dbg(&dev->dev, "  add dma %d flags %#x\n", dma, flags);
 	return pnp_res;
 }
 
@@ -562,7 +562,7 @@
 	res->start = start;
 	res->end = end;
 
-	dev_dbg(&dev->dev, "  add io  %#llx-%#llx flags %#x\n",
+	pnp_dbg(&dev->dev, "  add io  %#llx-%#llx flags %#x\n",
 		(unsigned long long) start, (unsigned long long) end, flags);
 	return pnp_res;
 }
@@ -587,7 +587,7 @@
 	res->start = start;
 	res->end = end;
 
-	dev_dbg(&dev->dev, "  add mem %#llx-%#llx flags %#x\n",
+	pnp_dbg(&dev->dev, "  add mem %#llx-%#llx flags %#x\n",
 		(unsigned long long) start, (unsigned long long) end, flags);
 	return pnp_res;
 }
diff --git a/drivers/pnp/support.c b/drivers/pnp/support.c
index b42df16..63087d5 100644
--- a/drivers/pnp/support.c
+++ b/drivers/pnp/support.c
@@ -75,18 +75,17 @@
 
 void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc)
 {
-#ifdef DEBUG
 	char buf[128];
 	int len;
 	struct pnp_resource *pnp_res;
 	struct resource *res;
 
 	if (list_empty(&dev->resources)) {
-		dev_dbg(&dev->dev, "%s: no current resources\n", desc);
+		pnp_dbg(&dev->dev, "%s: no current resources\n", desc);
 		return;
 	}
 
-	dev_dbg(&dev->dev, "%s: current resources:\n", desc);
+	pnp_dbg(&dev->dev, "%s: current resources:\n", desc);
 	list_for_each_entry(pnp_res, &dev->resources, list) {
 		res = &pnp_res->res;
 		len = 0;
@@ -95,7 +94,7 @@
 				 pnp_resource_type_name(res));
 
 		if (res->flags & IORESOURCE_DISABLED) {
-			dev_dbg(&dev->dev, "%sdisabled\n", buf);
+			pnp_dbg(&dev->dev, "%sdisabled\n", buf);
 			continue;
 		}
 
@@ -116,9 +115,8 @@
 					 res->flags);
 			break;
 		}
-		dev_dbg(&dev->dev, "%s\n", buf);
+		pnp_dbg(&dev->dev, "%s\n", buf);
 	}
-#endif
 }
 
 char *pnp_option_priority_name(struct pnp_option *option)
@@ -136,7 +134,6 @@
 
 void dbg_pnp_show_option(struct pnp_dev *dev, struct pnp_option *option)
 {
-#ifdef DEBUG
 	char buf[128];
 	int len = 0, i;
 	struct pnp_port *port;
@@ -208,6 +205,5 @@
 				 "flags %#x", dma->map, dma->flags);
 		break;
 	}
-	dev_dbg(&dev->dev, "%s\n", buf);
-#endif
+	pnp_dbg(&dev->dev, "%s\n", buf);
 }
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 814f49f..8abbb20 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -171,10 +171,10 @@
 	  will be called rtc-max6900.
 
 config RTC_DRV_RS5C372
-	tristate "Ricoh RS5C372A/B, RV5C386, RV5C387A"
+	tristate "Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A"
 	help
 	  If you say yes here you get support for the
-	  Ricoh RS5C372A, RS5C372B, RV5C386, and RV5C387A RTC chips.
+	  Ricoh R2025S/D, RS5C372A, RS5C372B, RV5C386, and RV5C387A RTC chips.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-rs5c372.
@@ -246,6 +246,16 @@
 	  platforms.  The support is integrated with the rest of
 	  the Menelaus driver; it's not separate module.
 
+config RTC_DRV_TWL4030
+	tristate "TI TWL4030/TWL5030/TPS659x0"
+	depends on RTC_CLASS && TWL4030_CORE
+	help
+	  If you say yes here you get support for the RTC on the
+	  TWL4030 family chips, used mostly with OMAP3 platforms.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-twl4030.
+
 config RTC_DRV_S35390A
 	tristate "Seiko Instruments S-35390A"
 	select BITREVERSE
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index d6a9ac7..e9e8474 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -63,6 +63,7 @@
 obj-$(CONFIG_RTC_DRV_SH)	+= rtc-sh.o
 obj-$(CONFIG_RTC_DRV_STK17TA8)	+= rtc-stk17ta8.o
 obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
+obj-$(CONFIG_RTC_DRV_TWL4030)	+= rtc-twl4030.o
 obj-$(CONFIG_RTC_DRV_V3020)	+= rtc-v3020.o
 obj-$(CONFIG_RTC_DRV_VR41XX)	+= rtc-vr41xx.o
 obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c
new file mode 100644
index 0000000..abe87a4
--- /dev/null
+++ b/drivers/rtc/rtc-twl4030.c
@@ -0,0 +1,564 @@
+/*
+ * rtc-twl4030.c -- TWL4030 Real Time Clock interface
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc
+ * Author: Alexandre Rusev <source@mvista.com>
+ *
+ * Based on original TI driver twl4030-rtc.c
+ *   Copyright (C) 2006 Texas Instruments, Inc.
+ *
+ * Based on rtc-omap.c
+ *   Copyright (C) 2003 MontaVista Software, Inc.
+ *   Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
+ *   Copyright (C) 2006 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+
+#include <linux/i2c/twl4030.h>
+
+
+/*
+ * RTC block register offsets (use TWL_MODULE_RTC)
+ */
+#define REG_SECONDS_REG                          0x00
+#define REG_MINUTES_REG                          0x01
+#define REG_HOURS_REG                            0x02
+#define REG_DAYS_REG                             0x03
+#define REG_MONTHS_REG                           0x04
+#define REG_YEARS_REG                            0x05
+#define REG_WEEKS_REG                            0x06
+
+#define REG_ALARM_SECONDS_REG                    0x07
+#define REG_ALARM_MINUTES_REG                    0x08
+#define REG_ALARM_HOURS_REG                      0x09
+#define REG_ALARM_DAYS_REG                       0x0A
+#define REG_ALARM_MONTHS_REG                     0x0B
+#define REG_ALARM_YEARS_REG                      0x0C
+
+#define REG_RTC_CTRL_REG                         0x0D
+#define REG_RTC_STATUS_REG                       0x0E
+#define REG_RTC_INTERRUPTS_REG                   0x0F
+
+#define REG_RTC_COMP_LSB_REG                     0x10
+#define REG_RTC_COMP_MSB_REG                     0x11
+
+/* RTC_CTRL_REG bitfields */
+#define BIT_RTC_CTRL_REG_STOP_RTC_M              0x01
+#define BIT_RTC_CTRL_REG_ROUND_30S_M             0x02
+#define BIT_RTC_CTRL_REG_AUTO_COMP_M             0x04
+#define BIT_RTC_CTRL_REG_MODE_12_24_M            0x08
+#define BIT_RTC_CTRL_REG_TEST_MODE_M             0x10
+#define BIT_RTC_CTRL_REG_SET_32_COUNTER_M        0x20
+#define BIT_RTC_CTRL_REG_GET_TIME_M              0x40
+
+/* RTC_STATUS_REG bitfields */
+#define BIT_RTC_STATUS_REG_RUN_M                 0x02
+#define BIT_RTC_STATUS_REG_1S_EVENT_M            0x04
+#define BIT_RTC_STATUS_REG_1M_EVENT_M            0x08
+#define BIT_RTC_STATUS_REG_1H_EVENT_M            0x10
+#define BIT_RTC_STATUS_REG_1D_EVENT_M            0x20
+#define BIT_RTC_STATUS_REG_ALARM_M               0x40
+#define BIT_RTC_STATUS_REG_POWER_UP_M            0x80
+
+/* RTC_INTERRUPTS_REG bitfields */
+#define BIT_RTC_INTERRUPTS_REG_EVERY_M           0x03
+#define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M        0x04
+#define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M        0x08
+
+
+/* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */
+#define ALL_TIME_REGS		6
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Supports 1 byte read from TWL4030 RTC register.
+ */
+static int twl4030_rtc_read_u8(u8 *data, u8 reg)
+{
+	int ret;
+
+	ret = twl4030_i2c_read_u8(TWL4030_MODULE_RTC, data, reg);
+	if (ret < 0)
+		pr_err("twl4030_rtc: Could not read TWL4030"
+		       "register %X - error %d\n", reg, ret);
+	return ret;
+}
+
+/*
+ * Supports 1 byte write to TWL4030 RTC registers.
+ */
+static int twl4030_rtc_write_u8(u8 data, u8 reg)
+{
+	int ret;
+
+	ret = twl4030_i2c_write_u8(TWL4030_MODULE_RTC, data, reg);
+	if (ret < 0)
+		pr_err("twl4030_rtc: Could not write TWL4030"
+		       "register %X - error %d\n", reg, ret);
+	return ret;
+}
+
+/*
+ * Cache the value for timer/alarm interrupts register; this is
+ * only changed by callers holding rtc ops lock (or resume).
+ */
+static unsigned char rtc_irq_bits;
+
+/*
+ * Enable timer and/or alarm interrupts.
+ */
+static int set_rtc_irq_bit(unsigned char bit)
+{
+	unsigned char val;
+	int ret;
+
+	val = rtc_irq_bits | bit;
+	ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
+	if (ret == 0)
+		rtc_irq_bits = val;
+
+	return ret;
+}
+
+/*
+ * Disable timer and/or alarm interrupts.
+ */
+static int mask_rtc_irq_bit(unsigned char bit)
+{
+	unsigned char val;
+	int ret;
+
+	val = rtc_irq_bits & ~bit;
+	ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
+	if (ret == 0)
+		rtc_irq_bits = val;
+
+	return ret;
+}
+
+static inline int twl4030_rtc_alarm_irq_set_state(int enabled)
+{
+	int ret;
+
+	if (enabled)
+		ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+	else
+		ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+
+	return ret;
+}
+
+static inline int twl4030_rtc_irq_set_state(int enabled)
+{
+	int ret;
+
+	if (enabled)
+		ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
+	else
+		ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
+
+	return ret;
+}
+
+/*
+ * Gets current TWL4030 RTC time and date parameters.
+ *
+ * The RTC's time/alarm representation is not what gmtime(3) requires
+ * Linux to use:
+ *
+ *  - Months are 1..12 vs Linux 0-11
+ *  - Years are 0..99 vs Linux 1900..N (we assume 21st century)
+ */
+static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned char rtc_data[ALL_TIME_REGS + 1];
+	int ret;
+	u8 save_control;
+
+	ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
+	if (ret < 0)
+		return ret;
+
+	save_control |= BIT_RTC_CTRL_REG_GET_TIME_M;
+
+	ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
+	if (ret < 0)
+		return ret;
+
+	ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data,
+			       REG_SECONDS_REG, ALL_TIME_REGS);
+
+	if (ret < 0) {
+		dev_err(dev, "rtc_read_time error %d\n", ret);
+		return ret;
+	}
+
+	tm->tm_sec = bcd2bin(rtc_data[0]);
+	tm->tm_min = bcd2bin(rtc_data[1]);
+	tm->tm_hour = bcd2bin(rtc_data[2]);
+	tm->tm_mday = bcd2bin(rtc_data[3]);
+	tm->tm_mon = bcd2bin(rtc_data[4]) - 1;
+	tm->tm_year = bcd2bin(rtc_data[5]) + 100;
+
+	return ret;
+}
+
+static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	unsigned char save_control;
+	unsigned char rtc_data[ALL_TIME_REGS + 1];
+	int ret;
+
+	rtc_data[1] = bin2bcd(tm->tm_sec);
+	rtc_data[2] = bin2bcd(tm->tm_min);
+	rtc_data[3] = bin2bcd(tm->tm_hour);
+	rtc_data[4] = bin2bcd(tm->tm_mday);
+	rtc_data[5] = bin2bcd(tm->tm_mon + 1);
+	rtc_data[6] = bin2bcd(tm->tm_year - 100);
+
+	/* Stop RTC while updating the TC registers */
+	ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
+	if (ret < 0)
+		goto out;
+
+	save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M;
+	twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
+	if (ret < 0)
+		goto out;
+
+	/* update all the time registers in one shot */
+	ret = twl4030_i2c_write(TWL4030_MODULE_RTC, rtc_data,
+			REG_SECONDS_REG, ALL_TIME_REGS);
+	if (ret < 0) {
+		dev_err(dev, "rtc_set_time error %d\n", ret);
+		goto out;
+	}
+
+	/* Start back RTC */
+	save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M;
+	ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
+
+out:
+	return ret;
+}
+
+/*
+ * Gets current TWL4030 RTC alarm time.
+ */
+static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	unsigned char rtc_data[ALL_TIME_REGS + 1];
+	int ret;
+
+	ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data,
+			       REG_ALARM_SECONDS_REG, ALL_TIME_REGS);
+	if (ret < 0) {
+		dev_err(dev, "rtc_read_alarm error %d\n", ret);
+		return ret;
+	}
+
+	/* some of these fields may be wildcard/"match all" */
+	alm->time.tm_sec = bcd2bin(rtc_data[0]);
+	alm->time.tm_min = bcd2bin(rtc_data[1]);
+	alm->time.tm_hour = bcd2bin(rtc_data[2]);
+	alm->time.tm_mday = bcd2bin(rtc_data[3]);
+	alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1;
+	alm->time.tm_year = bcd2bin(rtc_data[5]) + 100;
+
+	/* report cached alarm enable state */
+	if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M)
+		alm->enabled = 1;
+
+	return ret;
+}
+
+static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	unsigned char alarm_data[ALL_TIME_REGS + 1];
+	int ret;
+
+	ret = twl4030_rtc_alarm_irq_set_state(0);
+	if (ret)
+		goto out;
+
+	alarm_data[1] = bin2bcd(alm->time.tm_sec);
+	alarm_data[2] = bin2bcd(alm->time.tm_min);
+	alarm_data[3] = bin2bcd(alm->time.tm_hour);
+	alarm_data[4] = bin2bcd(alm->time.tm_mday);
+	alarm_data[5] = bin2bcd(alm->time.tm_mon + 1);
+	alarm_data[6] = bin2bcd(alm->time.tm_year - 100);
+
+	/* update all the alarm registers in one shot */
+	ret = twl4030_i2c_write(TWL4030_MODULE_RTC, alarm_data,
+			REG_ALARM_SECONDS_REG, ALL_TIME_REGS);
+	if (ret) {
+		dev_err(dev, "rtc_set_alarm error %d\n", ret);
+		goto out;
+	}
+
+	if (alm->enabled)
+		ret = twl4030_rtc_alarm_irq_set_state(1);
+out:
+	return ret;
+}
+
+#ifdef	CONFIG_RTC_INTF_DEV
+
+static int twl4030_rtc_ioctl(struct device *dev, unsigned int cmd,
+			     unsigned long arg)
+{
+	switch (cmd) {
+	case RTC_AIE_OFF:
+		return twl4030_rtc_alarm_irq_set_state(0);
+	case RTC_AIE_ON:
+		return twl4030_rtc_alarm_irq_set_state(1);
+	case RTC_UIE_OFF:
+		return twl4030_rtc_irq_set_state(0);
+	case RTC_UIE_ON:
+		return twl4030_rtc_irq_set_state(1);
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+#else
+#define	omap_rtc_ioctl	NULL
+#endif
+
+static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc)
+{
+	unsigned long events = 0;
+	int ret = IRQ_NONE;
+	int res;
+	u8 rd_reg;
+
+#ifdef CONFIG_LOCKDEP
+	/* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
+	 * we don't want and can't tolerate.  Although it might be
+	 * friendlier not to borrow this thread context...
+	 */
+	local_irq_enable();
+#endif
+
+	res = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
+	if (res)
+		goto out;
+	/*
+	 * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG.
+	 * only one (ALARM or RTC) interrupt source may be enabled
+	 * at time, we also could check our results
+	 * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM]
+	 */
+	if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
+		events |= RTC_IRQF | RTC_AF;
+	else
+		events |= RTC_IRQF | RTC_UF;
+
+	res = twl4030_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M,
+				   REG_RTC_STATUS_REG);
+	if (res)
+		goto out;
+
+	/* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1
+	 * needs 2 reads to clear the interrupt. One read is done in
+	 * do_twl4030_pwrirq(). Doing the second read, to clear
+	 * the bit.
+	 *
+	 * FIXME the reason PWR_ISR1 needs an extra read is that
+	 * RTC_IF retriggered until we cleared REG_ALARM_M above.
+	 * But re-reading like this is a bad hack; by doing so we
+	 * risk wrongly clearing status for some other IRQ (losing
+	 * the interrupt).  Be smarter about handling RTC_UF ...
+	 */
+	res = twl4030_i2c_read_u8(TWL4030_MODULE_INT,
+			&rd_reg, TWL4030_INT_PWR_ISR1);
+	if (res)
+		goto out;
+
+	/* Notify RTC core on event */
+	rtc_update_irq(rtc, 1, events);
+
+	ret = IRQ_HANDLED;
+out:
+	return ret;
+}
+
+static struct rtc_class_ops twl4030_rtc_ops = {
+	.ioctl		= twl4030_rtc_ioctl,
+	.read_time	= twl4030_rtc_read_time,
+	.set_time	= twl4030_rtc_set_time,
+	.read_alarm	= twl4030_rtc_read_alarm,
+	.set_alarm	= twl4030_rtc_set_alarm,
+};
+
+/*----------------------------------------------------------------------*/
+
+static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *rtc;
+	int ret = 0;
+	int irq = platform_get_irq(pdev, 0);
+	u8 rd_reg;
+
+	if (irq < 0)
+		return irq;
+
+	rtc = rtc_device_register(pdev->name,
+				  &pdev->dev, &twl4030_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		ret = -EINVAL;
+		dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
+			PTR_ERR(rtc));
+		goto out0;
+
+	}
+
+	platform_set_drvdata(pdev, rtc);
+
+	ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
+
+	if (ret < 0)
+		goto out1;
+
+	if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M)
+		dev_warn(&pdev->dev, "Power up reset detected.\n");
+
+	if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
+		dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n");
+
+	/* Clear RTC Power up reset and pending alarm interrupts */
+	ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG);
+	if (ret < 0)
+		goto out1;
+
+	ret = request_irq(irq, twl4030_rtc_interrupt,
+				IRQF_TRIGGER_RISING,
+				rtc->dev.bus_id, rtc);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "IRQ is not free.\n");
+		goto out1;
+	}
+
+	/* Check RTC module status, Enable if it is off */
+	ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG);
+	if (ret < 0)
+		goto out2;
+
+	if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) {
+		dev_info(&pdev->dev, "Enabling TWL4030-RTC.\n");
+		rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M;
+		ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG);
+		if (ret < 0)
+			goto out2;
+	}
+
+	/* init cached IRQ enable bits */
+	ret = twl4030_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
+	if (ret < 0)
+		goto out2;
+
+	return ret;
+
+
+out2:
+	free_irq(irq, rtc);
+out1:
+	rtc_device_unregister(rtc);
+out0:
+	return ret;
+}
+
+/*
+ * Disable all TWL4030 RTC module interrupts.
+ * Sets status flag to free.
+ */
+static int __devexit twl4030_rtc_remove(struct platform_device *pdev)
+{
+	/* leave rtc running, but disable irqs */
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
+
+	free_irq(irq, rtc);
+
+	rtc_device_unregister(rtc);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+static void twl4030_rtc_shutdown(struct platform_device *pdev)
+{
+	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
+			 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+}
+
+#ifdef CONFIG_PM
+
+static unsigned char irqstat;
+
+static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	irqstat = rtc_irq_bits;
+
+	/* REVISIT alarm may need to wake us from sleep */
+	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
+			 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+	return 0;
+}
+
+static int twl4030_rtc_resume(struct platform_device *pdev)
+{
+	set_rtc_irq_bit(irqstat);
+	return 0;
+}
+
+#else
+#define twl4030_rtc_suspend NULL
+#define twl4030_rtc_resume  NULL
+#endif
+
+MODULE_ALIAS("platform:twl4030_rtc");
+
+static struct platform_driver twl4030rtc_driver = {
+	.probe		= twl4030_rtc_probe,
+	.remove		= __devexit_p(twl4030_rtc_remove),
+	.shutdown	= twl4030_rtc_shutdown,
+	.suspend	= twl4030_rtc_suspend,
+	.resume		= twl4030_rtc_resume,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "twl4030_rtc",
+	},
+};
+
+static int __init twl4030_rtc_init(void)
+{
+	return platform_driver_register(&twl4030rtc_driver);
+}
+module_init(twl4030_rtc_init);
+
+static void __exit twl4030_rtc_exit(void)
+{
+	platform_driver_unregister(&twl4030rtc_driver);
+}
+module_exit(twl4030_rtc_exit);
+
+MODULE_AUTHOR("Texas Instruments, MontaVista Software");
+MODULE_LICENSE("GPL");
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 0a225cc..4b76fca 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -2011,10 +2011,9 @@
 	spin_unlock_irq(&block->request_queue_lock);
 }
 
-static int dasd_open(struct inode *inp, struct file *filp)
+static int dasd_open(struct block_device *bdev, fmode_t mode)
 {
-	struct gendisk *disk = inp->i_bdev->bd_disk;
-	struct dasd_block *block = disk->private_data;
+	struct dasd_block *block = bdev->bd_disk->private_data;
 	struct dasd_device *base = block->base;
 	int rc;
 
@@ -2052,9 +2051,8 @@
 	return rc;
 }
 
-static int dasd_release(struct inode *inp, struct file *filp)
+static int dasd_release(struct gendisk *disk, fmode_t mode)
 {
-	struct gendisk *disk = inp->i_bdev->bd_disk;
 	struct dasd_block *block = disk->private_data;
 
 	atomic_dec(&block->open_count);
@@ -2089,8 +2087,7 @@
 	.owner		= THIS_MODULE,
 	.open		= dasd_open,
 	.release	= dasd_release,
-	.ioctl		= dasd_ioctl,
-	.compat_ioctl	= dasd_compat_ioctl,
+	.locked_ioctl	= dasd_ioctl,
 	.getgeo		= dasd_getgeo,
 };
 
diff --git a/drivers/s390/block/dasd_genhd.c b/drivers/s390/block/dasd_genhd.c
index aee6565..e99d566 100644
--- a/drivers/s390/block/dasd_genhd.c
+++ b/drivers/s390/block/dasd_genhd.c
@@ -99,7 +99,7 @@
 	struct block_device *bdev;
 
 	bdev = bdget_disk(block->gdp, 0);
-	if (!bdev || blkdev_get(bdev, FMODE_READ, 1) < 0)
+	if (!bdev || blkdev_get(bdev, FMODE_READ) < 0)
 		return -ENODEV;
 	/*
 	 * See fs/partition/check.c:register_disk,rescan_partitions
@@ -152,7 +152,7 @@
 
 	invalidate_partition(block->gdp, 0);
 	/* Matching blkdev_put to the blkdev_get in dasd_scan_partitions. */
-	blkdev_put(bdev);
+	blkdev_put(bdev, FMODE_READ);
 	set_capacity(block->gdp, 0);
 }
 
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index 489d5fe..05a1453 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -610,8 +610,7 @@
 void dasd_destroy_partitions(struct dasd_block *);
 
 /* externals in dasd_ioctl.c */
-int  dasd_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
-long dasd_compat_ioctl(struct file *, unsigned int, unsigned long);
+int  dasd_ioctl(struct block_device *, fmode_t, unsigned int, unsigned long);
 
 /* externals in dasd_proc.c */
 int dasd_proc_init(void);
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index 91a6463..b82d816 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -366,10 +366,9 @@
 }
 
 int
-dasd_ioctl(struct inode *inode, struct file *file,
+dasd_ioctl(struct block_device *bdev, fmode_t mode,
 	   unsigned int cmd, unsigned long arg)
 {
-	struct block_device *bdev = inode->i_bdev;
 	struct dasd_block *block = bdev->bd_disk->private_data;
 	void __user *argp = (void __user *)arg;
 
@@ -421,15 +420,3 @@
 		return -EINVAL;
 	}
 }
-
-long
-dasd_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
-	int rval;
-
-	lock_kernel();
-	rval = dasd_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg);
-	unlock_kernel();
-
-	return (rval == -EINVAL) ? -ENOIOCTLCMD : rval;
-}
diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index a7ff167d..63f26a1 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -31,8 +31,8 @@
 #define PRINT_WARN(x...)  printk(KERN_WARNING DCSSBLK_NAME " warning: " x)
 #define PRINT_ERR(x...)	  printk(KERN_ERR DCSSBLK_NAME " error: " x)
 
-static int dcssblk_open(struct inode *inode, struct file *filp);
-static int dcssblk_release(struct inode *inode, struct file *filp);
+static int dcssblk_open(struct block_device *bdev, fmode_t mode);
+static int dcssblk_release(struct gendisk *disk, fmode_t mode);
 static int dcssblk_make_request(struct request_queue *q, struct bio *bio);
 static int dcssblk_direct_access(struct block_device *bdev, sector_t secnum,
 				 void **kaddr, unsigned long *pfn);
@@ -776,32 +776,31 @@
 }
 
 static int
-dcssblk_open(struct inode *inode, struct file *filp)
+dcssblk_open(struct block_device *bdev, fmode_t mode)
 {
 	struct dcssblk_dev_info *dev_info;
 	int rc;
 
-	dev_info = inode->i_bdev->bd_disk->private_data;
+	dev_info = bdev->bd_disk->private_data;
 	if (NULL == dev_info) {
 		rc = -ENODEV;
 		goto out;
 	}
 	atomic_inc(&dev_info->use_count);
-	inode->i_bdev->bd_block_size = 4096;
+	bdev->bd_block_size = 4096;
 	rc = 0;
 out:
 	return rc;
 }
 
 static int
-dcssblk_release(struct inode *inode, struct file *filp)
+dcssblk_release(struct gendisk *disk, fmode_t mode)
 {
-	struct dcssblk_dev_info *dev_info;
+	struct dcssblk_dev_info *dev_info = disk->private_data;
 	struct segment_info *entry;
 	int rc;
 
-	dev_info = inode->i_bdev->bd_disk->private_data;
-	if (NULL == dev_info) {
+	if (!dev_info) {
 		rc = -ENODEV;
 		goto out;
 	}
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index a25b8bf..023803d 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -43,9 +43,9 @@
 /*
  * file operation structure for tape block frontend
  */
-static int tapeblock_open(struct inode *, struct file *);
-static int tapeblock_release(struct inode *, struct file *);
-static int tapeblock_ioctl(struct inode *, struct file *, unsigned int,
+static int tapeblock_open(struct block_device *, fmode_t);
+static int tapeblock_release(struct gendisk *, fmode_t);
+static int tapeblock_ioctl(struct block_device *, fmode_t, unsigned int,
 				unsigned long);
 static int tapeblock_medium_changed(struct gendisk *);
 static int tapeblock_revalidate_disk(struct gendisk *);
@@ -54,7 +54,7 @@
 	.owner		 = THIS_MODULE,
 	.open		 = tapeblock_open,
 	.release	 = tapeblock_release,
-	.ioctl           = tapeblock_ioctl,
+	.locked_ioctl           = tapeblock_ioctl,
 	.media_changed   = tapeblock_medium_changed,
 	.revalidate_disk = tapeblock_revalidate_disk,
 };
@@ -364,13 +364,12 @@
  * Block frontend tape device open function.
  */
 static int
-tapeblock_open(struct inode *inode, struct file *filp)
+tapeblock_open(struct block_device *bdev, fmode_t mode)
 {
-	struct gendisk *	disk;
+	struct gendisk *	disk = bdev->bd_disk;
 	struct tape_device *	device;
 	int			rc;
 
-	disk   = inode->i_bdev->bd_disk;
 	device = tape_get_device_reference(disk->private_data);
 
 	if (device->required_tapemarks) {
@@ -410,9 +409,8 @@
  *       we just get the pointer here and release the reference.
  */
 static int
-tapeblock_release(struct inode *inode, struct file *filp)
+tapeblock_release(struct gendisk *disk, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
 	struct tape_device *device = disk->private_data;
 
 	tape_state_set(device, TS_IN_USE);
@@ -427,22 +425,21 @@
  */
 static int
 tapeblock_ioctl(
-	struct inode *		inode,
-	struct file *		file,
+	struct block_device *	bdev,
+	fmode_t			mode,
 	unsigned int		command,
 	unsigned long		arg
 ) {
 	int rc;
 	int minor;
-	struct gendisk *disk;
+	struct gendisk *disk = bdev->bd_disk;
 	struct tape_device *device;
 
 	rc     = 0;
-	disk   = inode->i_bdev->bd_disk;
 	BUG_ON(!disk);
 	device = disk->private_data;
 	BUG_ON(!device);
-	minor  = iminor(inode);
+	minor  = MINOR(bdev->bd_dev);
 
 	DBF_LH(6, "tapeblock_ioctl(0x%0x)\n", command);
 	DBF_LH(6, "device = %d:%d\n", tapeblock_major, minor);
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 326db1e..e3fe683 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -659,9 +659,9 @@
 	hr_time = ktime_set(0, poll_timeout);
 
 	if (!hrtimer_is_queued(&ap_poll_timer) ||
-	    !hrtimer_forward(&ap_poll_timer, ap_poll_timer.expires, hr_time)) {
-		ap_poll_timer.expires = hr_time;
-		hrtimer_start(&ap_poll_timer, hr_time, HRTIMER_MODE_ABS);
+	    !hrtimer_forward(&ap_poll_timer, hrtimer_get_expires(&ap_poll_timer), hr_time)) {
+		hrtimer_set_expires(&ap_poll_timer, hr_time);
+		hrtimer_start_expires(&ap_poll_timer, HRTIMER_MODE_ABS);
 	}
 	return count;
 }
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index b92c19b..5311317c 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1924,12 +1924,9 @@
 	    (cmd->sc_data_direction == DMA_FROM_DEVICE ||
 	     cmd->sc_data_direction == DMA_BIDIRECTIONAL)) {
 		if (scsi_sg_count(cmd) == 1) {
-			unsigned long flags;
 			void *buf = tw_dev->generic_buffer_virt[request_id];
 
-			local_irq_save(flags);
 			scsi_sg_copy_from_buffer(cmd, buf, TW_SECTOR_SIZE);
-			local_irq_restore(flags);
 		}
 	}
 } /* End twa_scsiop_execute_scsi_complete() */
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index a0537f0..c03f1d2 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -1466,12 +1466,7 @@
 static void tw_transfer_internal(TW_Device_Extension *tw_dev, int request_id,
 				 void *data, unsigned int len)
 {
-	struct scsi_cmnd *cmd = tw_dev->srb[request_id];
-	unsigned long flags;
-
-	local_irq_save(flags);
-	scsi_sg_copy_from_buffer(cmd, data, len);
-	local_irq_restore(flags);
+	scsi_sg_copy_from_buffer(tw_dev->srb[request_id], data, len);
 }
 
 /* This function is called by the isr to complete an inquiry command */
diff --git a/drivers/scsi/aic7xxx/aic79xx.reg b/drivers/scsi/aic7xxx/aic79xx.reg
index cca16fc..0666c22 100644
--- a/drivers/scsi/aic7xxx/aic79xx.reg
+++ b/drivers/scsi/aic7xxx/aic79xx.reg
@@ -80,6 +80,17 @@
 	}
 
 /*
+ * Registers marked "dont_generate_debug_code" are not (yet) referenced
+ * from the driver code, and this keyword inhibit generation
+ * of debug code for them.
+ *
+ * REG_PRETTY_PRINT config will complain if dont_generate_debug_code
+ * is added to the register which is referenced in the driver.
+ * Unreferenced register with no dont_generate_debug_code will result
+ * in dead code. No warning is issued.
+ */
+
+/*
  * Mode Pointer
  * Controls which of the 5, 512byte, address spaces should be used
  * as the source and destination of any register accesses in our
@@ -91,6 +102,7 @@
 	field	DST_MODE	0x70
 	field	SRC_MODE	0x07
 	mode_pointer
+	dont_generate_debug_code
 }
 
 const SRC_MODE_SHIFT	0
@@ -190,6 +202,7 @@
 		SAW_HWERR,
 		BAD_SCB_STATUS
 	}
+	dont_generate_debug_code
 }
 
 /*
@@ -207,6 +220,7 @@
 	field	CLRSEQINT	0x04
 	field	CLRCMDINT	0x02
 	field	CLRSPLTINT	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -222,6 +236,7 @@
 	field	SQPARERR	0x08
 	field	ILLOPCODE	0x04
 	field	DSCTMOUT	0x02
+	dont_generate_debug_code
 }
 
 /*
@@ -255,6 +270,7 @@
 	field	INTEN		0x02
 	field	CHIPRST		0x01
 	field	CHIPRSTACK	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -265,6 +281,7 @@
 	access_mode	RW
 	size		2
 	count		2
+	dont_generate_debug_code
 }
 
 /*
@@ -274,6 +291,7 @@
 	address			0x008
 	access_mode	RW
 	count		2
+	dont_generate_debug_code
 }
 
 /*
@@ -311,6 +329,7 @@
 	field	CLRSEQ_SCSIINT	0x04
 	field	CLRSEQ_PCIINT	0x02
 	field	CLRSEQ_SPLTINT	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -320,6 +339,7 @@
 	address			0x00E
 	access_mode	RW
 	size		2
+	dont_generate_debug_code
 }
 
 /*
@@ -330,6 +350,7 @@
 	access_mode	RW
 	size		2
 	modes		M_CCHAN
+	dont_generate_debug_code
 }
 
 /*
@@ -340,6 +361,7 @@
 	count		2
 	access_mode	RW
 	modes		M_CCHAN
+	dont_generate_debug_code
 }
 
 /*
@@ -350,6 +372,7 @@
 	access_mode	RW
 	modes		M_CCHAN
 	size		2
+	dont_generate_debug_code
 }
 
 /*
@@ -378,6 +401,7 @@
 		SCB_QSIZE_8192,
 		SCB_QSIZE_16384
 	}
+	dont_generate_debug_code
 }
 
 /*
@@ -431,6 +455,7 @@
 	field	EXTREQLCK	0x10	/* External Request Lock */
 	field	DISABLE_TWATE	0x02	/* Rev B or greater */
 	field	CIOPARCKEN	0x01	/* Internal bus parity error enable */
+	dont_generate_debug_code
 }
 
 /*
@@ -459,6 +484,7 @@
 	field	SG_ADDR_MASK	0xf8
 	field	ODD_SEG		0x04
 	field	LAST_SEG	0x02
+	dont_generate_debug_code
 }
 
 register SG_CACHE_SHADOW {
@@ -491,6 +517,7 @@
 	access_mode	RW
 	size		8
 	modes		M_DFF0, M_DFF1
+	dont_generate_debug_code
 }
 
 /*
@@ -522,6 +549,7 @@
 	access_mode	RW
 	size		3
 	modes		M_DFF0, M_DFF1
+	dont_generate_debug_code
 }
 
 /*
@@ -551,6 +579,7 @@
 	access_mode	RW
 	size		8
 	modes		M_DFF0, M_DFF1
+	dont_generate_debug_code
 }
 
 /*
@@ -561,6 +590,7 @@
 	access_mode	RW
 	size		8
 	modes		M_CCHAN
+	dont_generate_debug_code
 }
 
 /*
@@ -570,6 +600,7 @@
 	address			0x084
 	access_mode	RW
 	modes		M_DFF0, M_DFF1
+	dont_generate_debug_code
 }
 
 /*
@@ -579,6 +610,7 @@
 	address			0x084
 	access_mode	RW
 	modes		M_CCHAN
+	dont_generate_debug_code
 }
 
 /*
@@ -609,6 +641,7 @@
 		RD_DFTHRSH_90,
 		RD_DFTHRSH_MAX
 	}
+	dont_generate_debug_code
 }
 
 /*
@@ -817,6 +850,7 @@
 	field	SRSPDPEEN	0x04
 	field	TSCSERREN	0x02
 	field	CMPABCDIS	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -863,6 +897,7 @@
 	field	RXOVRUN		0x04
 	field	RXSCEMSG	0x02
 	field	RXSPLTRSP	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -908,6 +943,7 @@
 	modes		M_DFF0, M_DFF1
 	count		2
 	field	RXDATABUCKET	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -1069,6 +1105,7 @@
 	field	RXOVRUN		0x04
 	field	RXSCEMSG	0x02
 	field	RXSPLTRSP	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -1080,6 +1117,7 @@
 	modes		M_DFF0, M_DFF1
 	count		2
 	field	RXDATABUCKET	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -1091,6 +1129,7 @@
 	modes		M_CFG
 	field	TEST_GROUP	0xF0
 	field	TEST_NUM	0x0F
+	dont_generate_debug_code
 }
 
 /*
@@ -1109,6 +1148,7 @@
 	field	RDPERR		0x04
 	field	TWATERR		0x02
 	field	DPR		0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -1204,6 +1244,7 @@
 	field	SSE		0x40
 	field	STA		0x08
 	field	TWATERR		0x02
+	dont_generate_debug_code
 }
 
 /*
@@ -1216,6 +1257,7 @@
 	size		20
 	count		2
 	modes		M_DFF0, M_DFF1, M_SCSI
+	dont_generate_debug_code
 }
 
 /*
@@ -1247,6 +1289,7 @@
 	access_mode	RW
 	modes		M_CFG
 	count		2
+	dont_generate_debug_code
 }
 
 /*
@@ -1278,6 +1321,7 @@
 	access_mode	RW
 	modes		M_CFG
 	count		1
+	dont_generate_debug_code
 }
 
 /*
@@ -1290,6 +1334,7 @@
 	access_mode	RW
 	modes		M_CFG
 	count		1
+	dont_generate_debug_code
 }
 
 /*
@@ -1302,6 +1347,7 @@
 	access_mode	RW
 	modes		M_CFG
 	count		1
+	dont_generate_debug_code
 }
 
 /*
@@ -1313,6 +1359,7 @@
 	access_mode	RW
 	modes		M_CFG
 	count		1
+	dont_generate_debug_code
 }
 
 /*
@@ -1324,6 +1371,7 @@
 	access_mode	RW
 	modes		M_CFG
 	count		1
+	dont_generate_debug_code
 }
 
 /*
@@ -1347,6 +1395,7 @@
 	access_mode	RW
 	modes		M_CFG
 	count		1
+	dont_generate_debug_code
 }
 
 /*
@@ -1358,6 +1407,7 @@
 	access_mode	RW
 	modes		M_CFG
 	count		1
+	dont_generate_debug_code
 }
 
 /*
@@ -1398,6 +1448,7 @@
 	count		2
 	mask		ILUNLEN	0x0F
 	mask		TLUNLEN	0xF0
+	dont_generate_debug_code
 }
 const LUNLEN_SINGLE_LEVEL_LUN 0xF
 
@@ -1410,6 +1461,7 @@
 	access_mode	RW
 	modes		M_CFG
 	count		1
+	dont_generate_debug_code
 }
 
 /*
@@ -1422,6 +1474,7 @@
 	access_mode	RW
 	modes		M_CFG
 	count		9
+	dont_generate_debug_code
 }
 
 /*
@@ -1432,6 +1485,7 @@
 	address			0x033
 	access_mode	RW
 	modes		M_CFG
+	dont_generate_debug_code
 }
 
 /*
@@ -1490,6 +1544,7 @@
 	field	PCI2PCI		0x04
 	field	SINGLECMD	0x02
 	field	ABORTPENDING	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -1508,6 +1563,7 @@
 	field	LQOCONTINUE	0x04
 	field	LQOTOIDLE	0x02
 	field	LQOPAUSE	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -1578,6 +1634,7 @@
 	field	DFPEXP		0x40
 	field	BIOSCANCELEN	0x10
 	field	SPIOEN		0x08
+	dont_generate_debug_code
 }
 
 /*
@@ -1594,6 +1651,7 @@
 	field	ENSTIMER	0x04
 	field	ACTNEGEN	0x02
 	field	STPWEN		0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -1696,6 +1754,7 @@
 		P_STATUS	CDO|IOO,
 		P_MESGIN	CDO|IOO|MSGO
 	}
+	dont_generate_debug_code
 }
 
 /*
@@ -1738,6 +1797,7 @@
 	modes		M_CFG
 	size		2
 	count		2
+	dont_generate_debug_code
 }
 
 /*
@@ -1774,6 +1834,7 @@
 	access_mode	RW
 	modes		M_DFF0, M_DFF1, M_SCSI
 	size		2
+	dont_generate_debug_code
 }
 
 /*
@@ -1796,6 +1857,7 @@
 	count		2
 	field	CLKOUT		0x80
 	field	TARGID		0x0F
+	dont_generate_debug_code
 }
 
 /*
@@ -1825,6 +1887,7 @@
 	field	ENAB40		0x08	/* LVD transceiver active */
 	field	ENAB20		0x04	/* SE/HVD transceiver active */
 	field	SELWIDE		0x02
+	dont_generate_debug_code
 }
 
 /*
@@ -1842,6 +1905,7 @@
 	field	ENDGFORMCHK		0x04
 	field	AUTO_MSGOUT_DE		0x02
 	mask	OPTIONMODE_DEFAULTS	AUTO_MSGOUT_DE
+	dont_generate_debug_code
 }
 
 /*
@@ -1876,6 +1940,7 @@
 	field	CLROVERRUN	0x04
 	field	CLRSPIORDY	0x02
 	field	CLRARBDO	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -1929,6 +1994,7 @@
 	field	CLRSCSIPERR	0x04
 	field	CLRSTRB2FAST	0x02
 	field	CLRREQINIT	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -1962,6 +2028,7 @@
 	field	CLRWIDE_RES	0x04	/* Modes 0 and 1 only */
 	field	CLRSDONE	0x02	/* Modes 0 and 1 only */
 	field	CLRDMADONE	0x01	/* Modes 0 and 1 only */
+	dont_generate_debug_code
 }
 
 /*
@@ -2002,6 +2069,7 @@
 	access_mode	RO
 	modes		M_CFG
 	count		6
+	dont_generate_debug_code
 }
 
 /*
@@ -2022,6 +2090,7 @@
 	access_mode	RO
 	modes		M_CFG
 	count		2
+	dont_generate_debug_code
 }
 
 /*
@@ -2054,6 +2123,7 @@
 	field	CLRLQIBADLQT	0x04
 	field	CLRLQIATNLQ	0x02
 	field	CLRLQIATNCMD	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -2070,6 +2140,7 @@
 	field	ENLQIBADLQT	0x04
 	field	ENLQIATNLQ	0x02
 	field	ENLQIATNCMD	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -2106,6 +2177,7 @@
 	field	CLRLQIBADLQI	0x04
 	field	CLRLQIOVERI_LQ	0x02
 	field	CLRLQIOVERI_NLQ	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -2124,6 +2196,7 @@
 	field	ENLQIBADLQI	0x04
 	field	ENLQIOVERI_LQ	0x02	/* LQIOVERI1 */
 	field	ENLQIOVERI_NLQ	0x01	/* LQIOVERI2 */
+	dont_generate_debug_code
 }
 
 /*
@@ -2165,6 +2238,7 @@
 	count		3
 	field	CLRNTRAMPERR	0x02
 	field	CLROSRAMPERR	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -2177,6 +2251,7 @@
 	count		4
 	field	ENNTRAMPERR	0x02
 	field	ENOSRAMPERR	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -2207,6 +2282,7 @@
 	field	CLRLQOATNLQ		0x04
 	field	CLRLQOATNPKT		0x02
 	field	CLRLQOTCRC		0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -2222,6 +2298,7 @@
 	field	ENLQOATNLQ		0x04
 	field	ENLQOATNPKT		0x02
 	field	ENLQOTCRC		0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -2251,6 +2328,7 @@
 	field	CLRLQOBADQAS		0x04
 	field	CLRLQOBUSFREE		0x02
 	field	CLRLQOPHACHGINPKT	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -2266,6 +2344,7 @@
 	field	ENLQOBADQAS		0x04
 	field	ENLQOBUSFREE		0x02
 	field	ENLQOPHACHGINPKT	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -2289,6 +2368,7 @@
 	access_mode	RO
 	modes		M_CFG
 	count		2
+	dont_generate_debug_code
 }
 
 /*
@@ -2318,6 +2398,7 @@
 	access_mode	RO
 	size		2
 	modes		M_DFF0, M_DFF1, M_SCSI
+	dont_generate_debug_code
 }
 
 /*
@@ -2341,6 +2422,7 @@
 	access_mode	RW
 	size		2
 	modes		M_SCSI
+	dont_generate_debug_code
 }
 
 /*
@@ -2357,6 +2439,7 @@
 	field		LQOBUSETDLY	0x40
 	field		LQONOHOLDLACK	0x02
 	field		LQONOCHKOVER	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -2389,6 +2472,7 @@
 	field	CLRCFG4TSTAT	0x04
 	field	CLRCFG4ICMD	0x02
 	field	CLRCFG4TCMD	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -2415,6 +2499,7 @@
 	access_mode	RW
 	size		2
 	modes		M_SCSI
+	dont_generate_debug_code
 }
 
 /*
@@ -2472,6 +2557,7 @@
 	access_mode	RW
 	size		2
 	modes		M_SCSI
+	dont_generate_debug_code
 }
 
 /*
@@ -2494,6 +2580,7 @@
 	access_mode	RO
 	size		8
 	modes		M_DFF0, M_DFF1
+	dont_generate_debug_code
 }
 
 /*
@@ -2513,6 +2600,7 @@
 	address			0x060
 	access_mode	RW
 	modes		M_SCSI
+	dont_generate_debug_code
 }
 
 /*
@@ -2523,6 +2611,7 @@
 	access_mode	RW
 	modes		M_SCSI
 	count		1
+	dont_generate_debug_code
 }
 
 /*
@@ -2543,6 +2632,7 @@
 	access_mode	RW
 	modes		M_SCSI
 	count		1
+	dont_generate_debug_code
 }
 
 /*
@@ -2557,6 +2647,7 @@
 	field	PPROPT_QAS	0x04
 	field	PPROPT_DT	0x02
 	field	PPROPT_IUT	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -2573,6 +2664,7 @@
 	field	ENAUTOATNI	0x04
 	field	ENAUTOATNO	0x02
 	field	WIDEXFER	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -2583,6 +2675,7 @@
 	access_mode	RW
 	modes		M_SCSI
 	count		7
+	dont_generate_debug_code
 }
 
 /*
@@ -2602,6 +2695,7 @@
 	field	DFFACTCLR	0x04
 	field	SHVALIDSTDIS	0x02
 	field	LSTSGCLRDIS	0x01
+	dont_generate_debug_code
 }
 
 const AHD_ANNEXCOL_PER_DEV0	4
@@ -2635,6 +2729,7 @@
 	access_mode	RW
 	modes		M_SCSI
 	count		3
+	dont_generate_debug_code
 }
 
 /*
@@ -2645,6 +2740,7 @@
 	address			0x067
 	access_mode	RW
 	modes		M_SCSI
+	dont_generate_debug_code
 }
 
 /*
@@ -2671,6 +2767,7 @@
 	access_mode	RW
 	modes		M_SCSI
 	count		2
+	dont_generate_debug_code
 }
 
 /*
@@ -2702,6 +2799,7 @@
 	access_mode	RW
 	size		3
 	modes		M_DFF0, M_DFF1
+	dont_generate_debug_code
 }
 
 /*
@@ -2789,6 +2887,7 @@
 	access_mode	RW
 	size		2
 	modes		M_DFF0, M_DFF1, M_CCHAN, M_SCSI
+	dont_generate_debug_code
 }
 
 /*
@@ -2816,6 +2915,7 @@
 	field	AUSCBPTR_EN	0x80
 	field	SCBPTR_ADDR	0x38
 	field	SCBPTR_OFF	0x07
+	dont_generate_debug_code
 }
 
 /*
@@ -2825,6 +2925,7 @@
 	address			0x0AC
 	access_mode	RW
 	modes		M_DFF0, M_DFF1
+	dont_generate_debug_code
 }
 
 /*
@@ -2834,6 +2935,7 @@
 	address			0x0AC
 	access_mode	RW
 	modes		M_CCHAN
+	dont_generate_debug_code
 }
 
 /*
@@ -2899,6 +3001,7 @@
 	address			0x0B0
 	access_mode	RW
 	modes		M_DFF0, M_DFF1
+	dont_generate_debug_code
 }
 
 /*
@@ -2908,6 +3011,7 @@
 	address			0x0B0
 	access_mode	RW
 	modes		M_CCHAN
+	dont_generate_debug_code
 }
 
 /*
@@ -2958,6 +3062,7 @@
 	access_mode	RW
 	modes		M_SCSI
 	count		2
+	dont_generate_debug_code
 }
 
 /*
@@ -2974,6 +3079,7 @@
 	field	BRDEN		0x04
 	field	BRDRW		0x02
 	field	BRDSTB		0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -2984,6 +3090,7 @@
 	access_mode	RW
 	modes		M_SCSI
 	count		4
+	dont_generate_debug_code
 }
 
 /*
@@ -2995,6 +3102,7 @@
 	size		2
 	modes		M_SCSI
 	count		4
+	dont_generate_debug_code
 }
 
 /*
@@ -3011,6 +3119,7 @@
 	field	SEEARBACK	0x04
 	field	SEEBUSY		0x02
 	field	SEESTART	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -3036,6 +3145,7 @@
 	mask	SEEOP_EWDS	0x40
 	field	SEERST		0x02
 	field	SEESTART	0x01
+	dont_generate_debug_code
 }
 
 const SEEOP_ERAL_ADDR	0x80
@@ -3050,6 +3160,7 @@
 	address			0x0BF
 	access_mode	RW
 	modes		M_SCSI
+	dont_generate_debug_code
 }
 
 /*
@@ -3061,6 +3172,7 @@
 	access_mode	RW
 	size		2
 	modes		M_DFF0, M_DFF1
+	dont_generate_debug_code
 }
 
 /*
@@ -3087,6 +3199,7 @@
 	field	DESQDIS		0x10
 	field	RCVROFFSTDIS	0x04
 	field	XMITOFFSTDIS	0x02
+	dont_generate_debug_code
 }
 
 /*
@@ -3132,6 +3245,7 @@
 	address			0x0C4
 	access_mode	RW
 	modes		M_DFF0, M_DFF1
+	dont_generate_debug_code
 }
 
 /*
@@ -3144,6 +3258,7 @@
 	count		1
 	field	AUTOINCEN	0x80
 	field	DSPSEL		0x1F
+	dont_generate_debug_code
 }
 
 const NUMDSPS 0x14
@@ -3158,6 +3273,7 @@
 	count		3
 	field	AUTOXBCDIS	0x80
 	field	XMITMANVAL	0x3F
+	dont_generate_debug_code
 }
 
 /*
@@ -3316,6 +3432,7 @@
 	count		23
 	field	ZERO		0x02
 	field	CARRY		0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -3344,6 +3461,7 @@
 	address			0x0DA
 	access_mode 	RW
 	count		2
+	dont_generate_debug_code
 }
 
 /*
@@ -3355,6 +3473,7 @@
 	access_mode	RW
 	size		2
 	count		5
+	dont_generate_debug_code
 }
 
 /*
@@ -3364,6 +3483,7 @@
 	address			0x0E0
 	access_mode 	RW
 	accumulator
+	dont_generate_debug_code
 }
 
 /*
@@ -3380,6 +3500,7 @@
 	access_mode	RW
 	size		2
 	sindex
+	dont_generate_debug_code
 }
 
 /*
@@ -3390,6 +3511,7 @@
 	address			0x0E4
 	access_mode	RW
 	size		2
+	dont_generate_debug_code
 }
 
 /*
@@ -3415,6 +3537,7 @@
 	address			0x0E8
 	access_mode RO
 	allones
+	dont_generate_debug_code
 }
 
 /*
@@ -3425,6 +3548,7 @@
 	address			0x0EA
 	access_mode RO
 	allzeros
+	dont_generate_debug_code
 }
 
 /*
@@ -3435,6 +3559,7 @@
 	address			0x0EA
 	access_mode WO
 	none
+	dont_generate_debug_code
 }
 
 /*
@@ -3445,6 +3570,7 @@
 register SINDIR	{
 	address			0x0EC
 	access_mode RO
+	dont_generate_debug_code
 }
 
 /*
@@ -3455,6 +3581,7 @@
 register DINDIR	 {
 	address			0x0ED
 	access_mode WO
+	dont_generate_debug_code
 }
 
 /*
@@ -3479,6 +3606,7 @@
 register STACK {
 	address			0x0F2
 	access_mode RW
+	dont_generate_debug_code
 }
 
 /*
@@ -3491,6 +3619,7 @@
 	size		2
 	modes		M_CFG
 	count		1
+	dont_generate_debug_code
 }
 
 /*
@@ -3503,6 +3632,7 @@
 	size		2
 	modes		M_SCSI
 	count		2
+	dont_generate_debug_code
 }
 
 /*
@@ -3515,6 +3645,7 @@
 	size		2
 	modes		M_CFG
 	count		1
+	dont_generate_debug_code
 }
 
 /*
@@ -3543,12 +3674,14 @@
 	modes	0, 1, 2, 3
 	REG0 {
 		size		2
+		dont_generate_debug_code
 	}
 	REG1 {
 		size		2
 	}
 	REG_ISR {
 		size		2
+		dont_generate_debug_code
 	}
 	SG_STATE {
 		size		1
@@ -3572,9 +3705,11 @@
 	modes	0, 1, 2, 3
 	LONGJMP_ADDR {
 		size		2
+		dont_generate_debug_code
 	}
 	ACCUM_SAVE {
 		size		1
+		dont_generate_debug_code
 	}
 }
 
@@ -3591,18 +3726,22 @@
 	 */
 	WAITING_SCB_TAILS {
 		size		32
+		dont_generate_debug_code
 	}
 	WAITING_TID_HEAD {
 		size		2
+		dont_generate_debug_code
 	}
 	WAITING_TID_TAIL {
 		size		2
+		dont_generate_debug_code
 	}
 	/*
 	 * SCBID of the next SCB in the new SCB queue.
 	 */
 	NEXT_QUEUED_SCB_ADDR {
 		size		4
+		dont_generate_debug_code
 	}
 	/*
 	 * head of list of SCBs that have
@@ -3611,6 +3750,7 @@
 	 */
 	COMPLETE_SCB_HEAD {
 		size		2
+		dont_generate_debug_code
 	}
 	/*
 	 * The list of completed SCBs in
@@ -3618,6 +3758,7 @@
 	 */
 	COMPLETE_SCB_DMAINPROG_HEAD {
 		size		2
+		dont_generate_debug_code
 	}
 	/*
 	 * head of list of SCBs that have
@@ -3626,6 +3767,7 @@
 	 */
 	COMPLETE_DMA_SCB_HEAD {
 		size		2
+		dont_generate_debug_code
 	}
 	/*
 	 * tail of list of SCBs that have
@@ -3634,6 +3776,7 @@
 	 */
 	COMPLETE_DMA_SCB_TAIL {
 		size		2
+		dont_generate_debug_code
 	}
 	/*
 	 * head of list of SCBs that have
@@ -3643,6 +3786,7 @@
 	 */
 	COMPLETE_ON_QFREEZE_HEAD {
 		size		2
+		dont_generate_debug_code
 	}
 	/*
 	 * Counting semaphore to prevent new select-outs
@@ -3667,6 +3811,7 @@
 	 */
 	MSG_OUT {
 		size		1
+		dont_generate_debug_code
 	}
 	/* Parameters for DMA Logic */
 	DMAPARAMS {
@@ -3682,6 +3827,7 @@
 		field	DIRECTION	0x04	/* Set indicates PCI->SCSI */
 		field	FIFOFLUSH	0x02
 		field	FIFORESET	0x01
+		dont_generate_debug_code
 	}
 	SEQ_FLAGS {
 		size		1
@@ -3703,9 +3849,11 @@
 	 */
 	SAVED_SCSIID {
 		size		1
+		dont_generate_debug_code
 	}
 	SAVED_LUN {
 		size		1
+		dont_generate_debug_code
 	}
 	/*
 	 * The last bus phase as seen by the sequencer. 
@@ -3733,6 +3881,7 @@
 	 */
 	QOUTFIFO_ENTRY_VALID_TAG {
 		size		1
+		dont_generate_debug_code
 	}
 	/*
 	 * Kernel and sequencer offsets into the queue of
@@ -3742,10 +3891,12 @@
 	KERNEL_TQINPOS {
 		size		1
 		count		1
+		dont_generate_debug_code
 	}
 	TQINPOS {
 		size		1
 		count		8
+		dont_generate_debug_code
 	}
 	/*
 	 * Base address of our shared data with the kernel driver in host
@@ -3754,6 +3905,7 @@
 	 */
 	SHARED_DATA_ADDR {
 		size		4
+		dont_generate_debug_code
 	}
 	/*
 	 * Pointer to location in host memory for next
@@ -3761,6 +3913,7 @@
 	 */
 	QOUTFIFO_NEXT_ADDR {
 		size		4
+		dont_generate_debug_code
 	}
 	ARG_1 {
 		size		1
@@ -3773,11 +3926,13 @@
 		mask	CONT_MSG_LOOP_READ	0x03
 		mask	CONT_MSG_LOOP_TARG	0x02
 		alias	RETURN_1
+		dont_generate_debug_code
 	}
 	ARG_2 {
 		size		1
 		count		1
 		alias	RETURN_2
+		dont_generate_debug_code
 	}
 
 	/*
@@ -3785,6 +3940,7 @@
 	 */
 	LAST_MSG {
 		size		1
+		dont_generate_debug_code
 	}
 
 	/*
@@ -3801,6 +3957,7 @@
 		field	MANUALP		0x0C
 		field	ENAUTOATNP	0x02
 		field	ALTSTIM		0x01
+		dont_generate_debug_code
 	}
 
 	/*
@@ -3809,6 +3966,7 @@
 	INITIATOR_TAG {
 		size		1
 		count		1
+		dont_generate_debug_code
 	}
 
 	SEQ_FLAGS2 {
@@ -3820,6 +3978,7 @@
 
 	ALLOCFIFO_SCBPTR {
 		size		2
+		dont_generate_debug_code
 	}
 
 	/*
@@ -3829,6 +3988,7 @@
 	 */
 	INT_COALESCING_TIMER {
 		size		2
+		dont_generate_debug_code
 	}
 
 	/*
@@ -3838,6 +3998,7 @@
 	 */
 	INT_COALESCING_MAXCMDS {
 		size		1
+		dont_generate_debug_code
 	}
 
 	/*
@@ -3846,6 +4007,7 @@
 	 */
 	INT_COALESCING_MINCMDS {
 		size		1
+		dont_generate_debug_code
 	}
 
 	/*
@@ -3853,6 +4015,7 @@
 	 */
 	CMDS_PENDING {
 		size		2
+		dont_generate_debug_code
 	}
 
 	/*
@@ -3860,6 +4023,7 @@
 	 */
 	INT_COALESCING_CMDCOUNT {
 		size		1
+		dont_generate_debug_code
 	}
 
 	/*
@@ -3868,6 +4032,7 @@
 	 */
 	LOCAL_HS_MAILBOX {
 		size		1
+		dont_generate_debug_code
 	}
 	/*
 	 * Target-mode CDB type to CDB length table used
@@ -3876,6 +4041,7 @@
 	CMDSIZE_TABLE {
 		size		8
 		count		8
+		dont_generate_debug_code
 	}
 	/*
 	 * When an SCB with the MK_MESSAGE flag is
@@ -3908,25 +4074,31 @@
 		size	4
 		alias	SCB_CDB_STORE
 		alias	SCB_HOST_CDB_PTR
+		dont_generate_debug_code
 	}
 	SCB_RESIDUAL_SGPTR {
 		size	4
 		field	SG_ADDR_MASK		0xf8	/* In the last byte */
 		field	SG_OVERRUN_RESID	0x02	/* In the first byte */
 		field	SG_LIST_NULL		0x01	/* In the first byte */
+		dont_generate_debug_code
 	}
 	SCB_SCSI_STATUS {
 		size	1
 		alias	SCB_HOST_CDB_LEN
+		dont_generate_debug_code
 	}
 	SCB_TARGET_PHASES {
 		size	1
+		dont_generate_debug_code
 	}
 	SCB_TARGET_DATA_DIR {
 		size	1
+		dont_generate_debug_code
 	}
 	SCB_TARGET_ITAG {
 		size	1
+		dont_generate_debug_code
 	}
 	SCB_SENSE_BUSADDR {
 		/*
@@ -3936,10 +4108,12 @@
 		 */
 		size	4
 		alias	SCB_NEXT_COMPLETE
+		dont_generate_debug_code
 	}
 	SCB_TAG {
 		alias	SCB_FIFO_USE_COUNT
 		size	2
+		dont_generate_debug_code
 	}
 	SCB_CONTROL {
 		size	1
@@ -3959,6 +4133,7 @@
 	SCB_LUN {
 		size	1
 		field	LID	0xff
+		dont_generate_debug_code
 	}
 	SCB_TASK_ATTRIBUTE {
 		size	1
@@ -3967,16 +4142,20 @@
 		 * ignore wide residue message handling.
 		 */
 		field	SCB_XFERLEN_ODD	0x01
+		dont_generate_debug_code
 	}
 	SCB_CDB_LEN {
 		size	1
 		field	SCB_CDB_LEN_PTR	0x80	/* CDB in host memory */
+		dont_generate_debug_code
 	}
 	SCB_TASK_MANAGEMENT {
 		size	1
+		dont_generate_debug_code
 	}
 	SCB_DATAPTR {
 		size	8
+		dont_generate_debug_code
 	}
 	SCB_DATACNT {
 		/*
@@ -3986,22 +4165,27 @@
 		size	4
 		field	SG_LAST_SEG		0x80	/* In the fourth byte */
 		field	SG_HIGH_ADDR_BITS	0x7F	/* In the fourth byte */
+		dont_generate_debug_code
 	}
 	SCB_SGPTR {
 		size	4
 		field	SG_STATUS_VALID	0x04	/* In the first byte */
 		field	SG_FULL_RESID	0x02	/* In the first byte */
 		field	SG_LIST_NULL	0x01	/* In the first byte */
+		dont_generate_debug_code
 	}
 	SCB_BUSADDR {
 		size	4
+		dont_generate_debug_code
 	}
 	SCB_NEXT {
 		alias	SCB_NEXT_SCB_BUSADDR
 		size	2
+		dont_generate_debug_code
 	}
 	SCB_NEXT2 {
 		size	2
+		dont_generate_debug_code
 	}
 	SCB_SPARE {
 		size	8
@@ -4009,6 +4193,7 @@
 	}
 	SCB_DISCONNECTED_LISTS {
 		size	8
+		dont_generate_debug_code
 	}
 }
 
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 55508b0..bdad54e 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -2472,8 +2472,6 @@
 		if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0)
 			ahd_outb(ahd, CLRLQOINT1, 0);
 	} else if ((status & SELTO) != 0) {
-		u_int  scbid;
-
 		/* Stop the selection */
 		ahd_outb(ahd, SCSISEQ0, 0);
 
@@ -2583,9 +2581,6 @@
 		case BUSFREE_DFF0:
 		case BUSFREE_DFF1:
 		{
-			u_int	scbid;
-			struct	scb *scb;
-
 			mode = busfreetime == BUSFREE_DFF0
 			     ? AHD_MODE_DFF0 : AHD_MODE_DFF1;
 			ahd_set_modes(ahd, mode, mode);
@@ -3689,7 +3684,7 @@
  * by the capabilities of the bus connectivity of and sync settings for
  * the target.
  */
-void
+static void
 ahd_devlimited_syncrate(struct ahd_softc *ahd,
 			struct ahd_initiator_tinfo *tinfo,
 			u_int *period, u_int *ppr_options, role_t role)
@@ -4136,7 +4131,7 @@
 
 			/*
 			 * Harpoon2A assumed that there would be a
-			 * fallback rate between 160MHz and 80Mhz,
+			 * fallback rate between 160MHz and 80MHz,
 			 * so 7 is used as the period factor rather
 			 * than 8 for 160MHz.
 			 */
@@ -8708,7 +8703,7 @@
 int
 ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset)
 {
-	struct	ahd_devinfo devinfo;
+	struct	ahd_devinfo caminfo;
 	u_int	initiator;
 	u_int	target;
 	u_int	max_scsiid;
@@ -8729,7 +8724,7 @@
 
 	ahd->pending_device = NULL;
 
-	ahd_compile_devinfo(&devinfo,
+	ahd_compile_devinfo(&caminfo,
 			    CAM_TARGET_WILDCARD,
 			    CAM_TARGET_WILDCARD,
 			    CAM_LUN_WILDCARD,
@@ -8868,7 +8863,7 @@
 	}
 
 	/* Notify the XPT that a bus reset occurred */
-	ahd_send_async(ahd, devinfo.channel, CAM_TARGET_WILDCARD,
+	ahd_send_async(ahd, caminfo.channel, CAM_TARGET_WILDCARD,
 		       CAM_LUN_WILDCARD, AC_BUS_RESET);
 
 	ahd_restart(ahd);
diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c
index c25b6ad..a734d77 100644
--- a/drivers/scsi/aic7xxx/aic79xx_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_pci.c
@@ -223,10 +223,10 @@
 	"PCI bus mode unknown",
 	"PCI bus mode unknown",
 	"PCI bus mode unknown",
-	"PCI-X 101-133Mhz",
-	"PCI-X 67-100Mhz",
-	"PCI-X 50-66Mhz",
-	"PCI 33 or 66Mhz"
+	"PCI-X 101-133MHz",
+	"PCI-X 67-100MHz",
+	"PCI-X 50-66MHz",
+	"PCI 33 or 66MHz"
 };
 
 #define		TESTMODE	0x00000800ul
@@ -337,8 +337,6 @@
 	 * 64bit bus (PCI64BIT set in devconfig).
 	 */
 	if ((ahd->flags & (AHD_39BIT_ADDRESSING|AHD_64BIT_ADDRESSING)) != 0) {
-		uint32_t devconfig;
-
 		if (bootverbose)
 			printf("%s: Enabling 39Bit Addressing\n",
 			       ahd_name(ahd));
@@ -483,8 +481,6 @@
 		goto fail;
 
 	if ((ahd_inb(ahd, INTSTAT) & PCIINT) != 0) {
-		u_int targpcistat;
-
 		ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
 		targpcistat = ahd_inb(ahd, TARGPCISTAT);
 		if ((targpcistat & STA) != 0)
diff --git a/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped b/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped
index c21ceab..cdcead0 100644
--- a/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped
+++ b/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped
@@ -34,13 +34,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_clrint_print;
-#else
-#define ahd_clrint_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "CLRINT", 0x03, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_error_print;
 #else
 #define ahd_error_print(regvalue, cur_col, wrap) \
@@ -48,20 +41,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_hcntrl_print;
-#else
-#define ahd_hcntrl_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "HCNTRL", 0x05, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_hnscb_qoff_print;
-#else
-#define ahd_hnscb_qoff_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "HNSCB_QOFF", 0x06, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_hescb_qoff_print;
 #else
 #define ahd_hescb_qoff_print(regvalue, cur_col, wrap) \
@@ -97,13 +76,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_snscb_qoff_print;
-#else
-#define ahd_snscb_qoff_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SNSCB_QOFF", 0x10, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_sescb_qoff_print;
 #else
 #define ahd_sescb_qoff_print(regvalue, cur_col, wrap) \
@@ -111,20 +83,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_sdscb_qoff_print;
-#else
-#define ahd_sdscb_qoff_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SDSCB_QOFF", 0x14, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_qoff_ctlsta_print;
-#else
-#define ahd_qoff_ctlsta_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "QOFF_CTLSTA", 0x16, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_intctl_print;
 #else
 #define ahd_intctl_print(regvalue, cur_col, wrap) \
@@ -139,13 +97,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_dscommand0_print;
-#else
-#define ahd_dscommand0_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "DSCOMMAND0", 0x19, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_dfstatus_print;
 #else
 #define ahd_dfstatus_print(regvalue, cur_col, wrap) \
@@ -160,13 +111,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_sg_cache_pre_print;
-#else
-#define ahd_sg_cache_pre_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SG_CACHE_PRE", 0x1b, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_lqin_print;
 #else
 #define ahd_lqin_print(regvalue, cur_col, wrap) \
@@ -293,13 +237,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_sxfrctl1_print;
-#else
-#define ahd_sxfrctl1_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SXFRCTL1", 0x3d, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_dffstat_print;
 #else
 #define ahd_dffstat_print(regvalue, cur_col, wrap) \
@@ -314,13 +251,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scsisigo_print;
-#else
-#define ahd_scsisigo_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SCSISIGO", 0x40, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_scsisigi_print;
 #else
 #define ahd_scsisigi_print(regvalue, cur_col, wrap) \
@@ -363,13 +293,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_optionmode_print;
-#else
-#define ahd_optionmode_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "OPTIONMODE", 0x4a, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_sblkctl_print;
 #else
 #define ahd_sblkctl_print(regvalue, cur_col, wrap) \
@@ -391,13 +314,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_clrsint0_print;
-#else
-#define ahd_clrsint0_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "CLRSINT0", 0x4b, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_sstat1_print;
 #else
 #define ahd_sstat1_print(regvalue, cur_col, wrap) \
@@ -405,13 +321,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_clrsint1_print;
-#else
-#define ahd_clrsint1_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "CLRSINT1", 0x4c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_sstat2_print;
 #else
 #define ahd_sstat2_print(regvalue, cur_col, wrap) \
@@ -461,13 +370,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_lqimode0_print;
-#else
-#define ahd_lqimode0_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "LQIMODE0", 0x50, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_clrlqiint0_print;
 #else
 #define ahd_clrlqiint0_print(regvalue, cur_col, wrap) \
@@ -475,6 +377,13 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
+ahd_reg_print_t ahd_lqimode0_print;
+#else
+#define ahd_lqimode0_print(regvalue, cur_col, wrap) \
+    ahd_print_register(NULL, 0, "LQIMODE0", 0x50, regvalue, cur_col, wrap)
+#endif
+
+#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_lqimode1_print;
 #else
 #define ahd_lqimode1_print(regvalue, cur_col, wrap) \
@@ -629,13 +538,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_seqimode_print;
-#else
-#define ahd_seqimode_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SEQIMODE", 0x5c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_currscb_print;
 #else
 #define ahd_currscb_print(regvalue, cur_col, wrap) \
@@ -643,6 +545,13 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
+ahd_reg_print_t ahd_seqimode_print;
+#else
+#define ahd_seqimode_print(regvalue, cur_col, wrap) \
+    ahd_print_register(NULL, 0, "SEQIMODE", 0x5c, regvalue, cur_col, wrap)
+#endif
+
+#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_mdffstat_print;
 #else
 #define ahd_mdffstat_print(regvalue, cur_col, wrap) \
@@ -657,13 +566,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_shaddr_print;
-#else
-#define ahd_shaddr_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SHADDR", 0x60, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_negoaddr_print;
 #else
 #define ahd_negoaddr_print(regvalue, cur_col, wrap) \
@@ -748,17 +650,10 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_haddr_print;
+ahd_reg_print_t ahd_scbhaddr_print;
 #else
-#define ahd_haddr_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "HADDR", 0x70, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_hcnt_print;
-#else
-#define ahd_hcnt_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "HCNT", 0x78, regvalue, cur_col, wrap)
+#define ahd_scbhaddr_print(regvalue, cur_col, wrap) \
+    ahd_print_register(NULL, 0, "SCBHADDR", 0x7c, regvalue, cur_col, wrap)
 #endif
 
 #if AIC_DEBUG_REGISTERS
@@ -769,20 +664,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scbhaddr_print;
-#else
-#define ahd_scbhaddr_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SCBHADDR", 0x7c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_sghcnt_print;
-#else
-#define ahd_sghcnt_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SGHCNT", 0x84, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_scbhcnt_print;
 #else
 #define ahd_scbhcnt_print(regvalue, cur_col, wrap) \
@@ -790,10 +671,10 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_dff_thrsh_print;
+ahd_reg_print_t ahd_sghcnt_print;
 #else
-#define ahd_dff_thrsh_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "DFF_THRSH", 0x88, regvalue, cur_col, wrap)
+#define ahd_sghcnt_print(regvalue, cur_col, wrap) \
+    ahd_print_register(NULL, 0, "SGHCNT", 0x84, regvalue, cur_col, wrap)
 #endif
 
 #if AIC_DEBUG_REGISTERS
@@ -867,13 +748,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scbptr_print;
-#else
-#define ahd_scbptr_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SCBPTR", 0xa8, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_scbautoptr_print;
 #else
 #define ahd_scbautoptr_print(regvalue, cur_col, wrap) \
@@ -881,13 +755,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_ccsgaddr_print;
-#else
-#define ahd_ccsgaddr_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "CCSGADDR", 0xac, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_ccscbaddr_print;
 #else
 #define ahd_ccscbaddr_print(regvalue, cur_col, wrap) \
@@ -909,13 +776,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_ccsgram_print;
-#else
-#define ahd_ccsgram_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "CCSGRAM", 0xb0, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_ccscbram_print;
 #else
 #define ahd_ccscbram_print(regvalue, cur_col, wrap) \
@@ -930,13 +790,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_brdctl_print;
-#else
-#define ahd_brdctl_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "BRDCTL", 0xb9, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_seeadr_print;
 #else
 #define ahd_seeadr_print(regvalue, cur_col, wrap) \
@@ -972,13 +825,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_dfdat_print;
-#else
-#define ahd_dfdat_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "DFDAT", 0xc4, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_dspselect_print;
 #else
 #define ahd_dspselect_print(regvalue, cur_col, wrap) \
@@ -1000,13 +846,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_flags_print;
-#else
-#define ahd_flags_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "FLAGS", 0xd8, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_seqintctl_print;
 #else
 #define ahd_seqintctl_print(regvalue, cur_col, wrap) \
@@ -1014,13 +853,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_seqram_print;
-#else
-#define ahd_seqram_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SEQRAM", 0xda, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_prgmcnt_print;
 #else
 #define ahd_prgmcnt_print(regvalue, cur_col, wrap) \
@@ -1028,41 +860,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_accum_print;
-#else
-#define ahd_accum_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "ACCUM", 0xe0, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_sindex_print;
-#else
-#define ahd_sindex_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SINDEX", 0xe2, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_dindex_print;
-#else
-#define ahd_dindex_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "DINDEX", 0xe4, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_allones_print;
-#else
-#define ahd_allones_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "ALLONES", 0xe8, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_allzeros_print;
-#else
-#define ahd_allzeros_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "ALLZEROS", 0xea, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_none_print;
 #else
 #define ahd_none_print(regvalue, cur_col, wrap) \
@@ -1070,27 +867,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_sindir_print;
-#else
-#define ahd_sindir_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SINDIR", 0xec, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_dindir_print;
-#else
-#define ahd_dindir_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "DINDIR", 0xed, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_stack_print;
-#else
-#define ahd_stack_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "STACK", 0xf2, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_intvec1_addr_print;
 #else
 #define ahd_intvec1_addr_print(regvalue, cur_col, wrap) \
@@ -1126,13 +902,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_sram_base_print;
-#else
-#define ahd_sram_base_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SRAM_BASE", 0x100, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_waiting_scb_tails_print;
 #else
 #define ahd_waiting_scb_tails_print(regvalue, cur_col, wrap) \
@@ -1140,6 +909,13 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
+ahd_reg_print_t ahd_sram_base_print;
+#else
+#define ahd_sram_base_print(regvalue, cur_col, wrap) \
+    ahd_print_register(NULL, 0, "SRAM_BASE", 0x100, regvalue, cur_col, wrap)
+#endif
+
+#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_waiting_tid_head_print;
 #else
 #define ahd_waiting_tid_head_print(regvalue, cur_col, wrap) \
@@ -1224,13 +1000,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_dmaparams_print;
-#else
-#define ahd_dmaparams_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "DMAPARAMS", 0x138, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_seq_flags_print;
 #else
 #define ahd_seq_flags_print(regvalue, cur_col, wrap) \
@@ -1238,20 +1007,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_saved_scsiid_print;
-#else
-#define ahd_saved_scsiid_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SAVED_SCSIID", 0x13a, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_saved_lun_print;
-#else
-#define ahd_saved_lun_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SAVED_LUN", 0x13b, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_lastphase_print;
 #else
 #define ahd_lastphase_print(regvalue, cur_col, wrap) \
@@ -1273,20 +1028,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_tqinpos_print;
-#else
-#define ahd_tqinpos_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "TQINPOS", 0x13f, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_shared_data_addr_print;
-#else
-#define ahd_shared_data_addr_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SHARED_DATA_ADDR", 0x140, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_qoutfifo_next_addr_print;
 #else
 #define ahd_qoutfifo_next_addr_print(regvalue, cur_col, wrap) \
@@ -1294,20 +1035,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_arg_1_print;
-#else
-#define ahd_arg_1_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "ARG_1", 0x148, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_arg_2_print;
-#else
-#define ahd_arg_2_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "ARG_2", 0x149, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_last_msg_print;
 #else
 #define ahd_last_msg_print(regvalue, cur_col, wrap) \
@@ -1406,13 +1133,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_residual_datacnt_print;
-#else
-#define ahd_scb_residual_datacnt_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SCB_RESIDUAL_DATACNT", 0x180, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_scb_base_print;
 #else
 #define ahd_scb_base_print(regvalue, cur_col, wrap) \
@@ -1420,17 +1140,10 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_residual_sgptr_print;
+ahd_reg_print_t ahd_scb_residual_datacnt_print;
 #else
-#define ahd_scb_residual_sgptr_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SCB_RESIDUAL_SGPTR", 0x184, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_scsi_status_print;
-#else
-#define ahd_scb_scsi_status_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SCB_SCSI_STATUS", 0x188, regvalue, cur_col, wrap)
+#define ahd_scb_residual_datacnt_print(regvalue, cur_col, wrap) \
+    ahd_print_register(NULL, 0, "SCB_RESIDUAL_DATACNT", 0x180, regvalue, cur_col, wrap)
 #endif
 
 #if AIC_DEBUG_REGISTERS
@@ -1476,13 +1189,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_cdb_len_print;
-#else
-#define ahd_scb_cdb_len_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SCB_CDB_LEN", 0x196, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_scb_task_management_print;
 #else
 #define ahd_scb_task_management_print(regvalue, cur_col, wrap) \
@@ -1518,13 +1224,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_next_print;
-#else
-#define ahd_scb_next_print(regvalue, cur_col, wrap) \
-    ahd_print_register(NULL, 0, "SCB_NEXT", 0x1ac, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahd_reg_print_t ahd_scb_next2_print;
 #else
 #define ahd_scb_next2_print(regvalue, cur_col, wrap) \
@@ -1717,10 +1416,10 @@
 
 #define	SG_CACHE_PRE    		0x1b
 
-#define	TYPEPTR         		0x20
-
 #define	LQIN            		0x20
 
+#define	TYPEPTR         		0x20
+
 #define	TAGPTR          		0x21
 
 #define	LUNPTR          		0x22
@@ -1780,6 +1479,14 @@
 #define		SINGLECMD       	0x02
 #define		ABORTPENDING    	0x01
 
+#define	SCSBIST0        		0x39
+#define		GSBISTERR       	0x40
+#define		GSBISTDONE      	0x20
+#define		GSBISTRUN       	0x10
+#define		OSBISTERR       	0x04
+#define		OSBISTDONE      	0x02
+#define		OSBISTRUN       	0x01
+
 #define	LQCTL2          		0x39
 #define		LQIRETRY        	0x80
 #define		LQICONTINUE     	0x40
@@ -1790,13 +1497,10 @@
 #define		LQOTOIDLE       	0x02
 #define		LQOPAUSE        	0x01
 
-#define	SCSBIST0        		0x39
-#define		GSBISTERR       	0x40
-#define		GSBISTDONE      	0x20
-#define		GSBISTRUN       	0x10
-#define		OSBISTERR       	0x04
-#define		OSBISTDONE      	0x02
-#define		OSBISTRUN       	0x01
+#define	SCSBIST1        		0x3a
+#define		NTBISTERR       	0x04
+#define		NTBISTDONE      	0x02
+#define		NTBISTRUN       	0x01
 
 #define	SCSISEQ0        		0x3a
 #define		TEMODEO         	0x80
@@ -1805,15 +1509,8 @@
 #define		FORCEBUSFREE    	0x10
 #define		SCSIRSTO        	0x01
 
-#define	SCSBIST1        		0x3a
-#define		NTBISTERR       	0x04
-#define		NTBISTDONE      	0x02
-#define		NTBISTRUN       	0x01
-
 #define	SCSISEQ1        		0x3b
 
-#define	BUSINITID       		0x3c
-
 #define	SXFRCTL0        		0x3c
 #define		DFON            	0x80
 #define		DFPEXP          	0x40
@@ -1822,6 +1519,8 @@
 
 #define	DLCOUNT         		0x3c
 
+#define	BUSINITID       		0x3c
+
 #define	SXFRCTL1        		0x3d
 #define		BITBUCKET       	0x80
 #define		ENSACHK         	0x40
@@ -1846,8 +1545,6 @@
 #define		CURRFIFO_1      	0x01
 #define		CURRFIFO_0      	0x00
 
-#define	MULTARGID       		0x40
-
 #define	SCSISIGO        		0x40
 #define		CDO             	0x80
 #define		IOO             	0x40
@@ -1858,6 +1555,8 @@
 #define		REQO            	0x02
 #define		ACKO            	0x01
 
+#define	MULTARGID       		0x40
+
 #define	SCSISIGI        		0x41
 #define		ATNI            	0x10
 #define		SELI            	0x08
@@ -1904,6 +1603,15 @@
 #define		ENAB20          	0x04
 #define		SELWIDE         	0x02
 
+#define	CLRSINT0        		0x4b
+#define		CLRSELDO        	0x40
+#define		CLRSELDI        	0x20
+#define		CLRSELINGO      	0x10
+#define		CLRIOERR        	0x08
+#define		CLROVERRUN      	0x04
+#define		CLRSPIORDY      	0x02
+#define		CLRARBDO        	0x01
+
 #define	SSTAT0          		0x4b
 #define		TARGET          	0x80
 #define		SELDO           	0x40
@@ -1923,14 +1631,14 @@
 #define		ENSPIORDY       	0x02
 #define		ENARBDO         	0x01
 
-#define	CLRSINT0        		0x4b
-#define		CLRSELDO        	0x40
-#define		CLRSELDI        	0x20
-#define		CLRSELINGO      	0x10
-#define		CLRIOERR        	0x08
-#define		CLROVERRUN      	0x04
-#define		CLRSPIORDY      	0x02
-#define		CLRARBDO        	0x01
+#define	CLRSINT1        		0x4c
+#define		CLRSELTIMEO     	0x80
+#define		CLRATNO         	0x40
+#define		CLRSCSIRSTI     	0x20
+#define		CLRBUSFREE      	0x08
+#define		CLRSCSIPERR     	0x04
+#define		CLRSTRB2FAST    	0x02
+#define		CLRREQINIT      	0x01
 
 #define	SSTAT1          		0x4c
 #define		SELTO           	0x80
@@ -1942,15 +1650,6 @@
 #define		STRB2FAST       	0x02
 #define		REQINIT         	0x01
 
-#define	CLRSINT1        		0x4c
-#define		CLRSELTIMEO     	0x80
-#define		CLRATNO         	0x40
-#define		CLRSCSIRSTI     	0x20
-#define		CLRBUSFREE      	0x08
-#define		CLRSCSIPERR     	0x04
-#define		CLRSTRB2FAST    	0x02
-#define		CLRREQINIT      	0x01
-
 #define	SSTAT2          		0x4d
 #define		BUSFREETIME     	0xc0
 #define		NONPACKREQ      	0x20
@@ -1998,14 +1697,6 @@
 #define		LQIATNLQ        	0x02
 #define		LQIATNCMD       	0x01
 
-#define	LQIMODE0        		0x50
-#define		ENLQIATNQASK    	0x20
-#define		ENLQICRCT1      	0x10
-#define		ENLQICRCT2      	0x08
-#define		ENLQIBADLQT     	0x04
-#define		ENLQIATNLQ      	0x02
-#define		ENLQIATNCMD     	0x01
-
 #define	CLRLQIINT0      		0x50
 #define		CLRLQIATNQAS    	0x20
 #define		CLRLQICRCT1     	0x10
@@ -2014,6 +1705,14 @@
 #define		CLRLQIATNLQ     	0x02
 #define		CLRLQIATNCMD    	0x01
 
+#define	LQIMODE0        		0x50
+#define		ENLQIATNQASK    	0x20
+#define		ENLQICRCT1      	0x10
+#define		ENLQICRCT2      	0x08
+#define		ENLQIBADLQT     	0x04
+#define		ENLQIATNLQ      	0x02
+#define		ENLQIATNCMD     	0x01
+
 #define	LQIMODE1        		0x51
 #define		ENLQIPHASE_LQ   	0x80
 #define		ENLQIPHASE_NLQ  	0x40
@@ -2160,6 +1859,8 @@
 #define		CFG4ICMD        	0x02
 #define		CFG4TCMD        	0x01
 
+#define	CURRSCB         		0x5c
+
 #define	SEQIMODE        		0x5c
 #define		ENCTXTDONE      	0x40
 #define		ENSAVEPTRS      	0x20
@@ -2169,8 +1870,6 @@
 #define		ENCFG4ICMD      	0x02
 #define		ENCFG4TCMD      	0x01
 
-#define	CURRSCB         		0x5c
-
 #define	MDFFSTAT        		0x5d
 #define		SHCNTNEGATIVE   	0x40
 #define		SHCNTMINUS1     	0x20
@@ -2185,29 +1884,29 @@
 
 #define	DFFTAG          		0x5e
 
+#define	LASTSCB         		0x5e
+
 #define	SCSITEST        		0x5e
 #define		CNTRTEST        	0x08
 #define		SEL_TXPLL_DEBUG 	0x04
 
-#define	LASTSCB         		0x5e
-
 #define	IOPDNCTL        		0x5f
 #define		DISABLE_OE      	0x80
 #define		PDN_IDIST       	0x04
 #define		PDN_DIFFSENSE   	0x01
 
-#define	DGRPCRCI        		0x60
-
 #define	SHADDR          		0x60
 
 #define	NEGOADDR        		0x60
 
+#define	DGRPCRCI        		0x60
+
 #define	NEGPERIOD       		0x61
 
-#define	NEGOFFSET       		0x62
-
 #define	PACKCRCI        		0x62
 
+#define	NEGOFFSET       		0x62
+
 #define	NEGPPROPTS      		0x63
 #define		PPROPT_PACE     	0x08
 #define		PPROPT_QAS      	0x04
@@ -2253,8 +1952,6 @@
 
 #define	SELOID          		0x6b
 
-#define	FAIRNESS        		0x6c
-
 #define	PLL400CTL0      		0x6c
 #define		PLL_VCOSEL      	0x80
 #define		PLL_PWDN        	0x40
@@ -2264,6 +1961,8 @@
 #define		PLL_DLPF        	0x02
 #define		PLL_ENFBM       	0x01
 
+#define	FAIRNESS        		0x6c
+
 #define	PLL400CTL1      		0x6d
 #define		PLL_CNTEN       	0x80
 #define		PLL_CNTCLR      	0x40
@@ -2275,25 +1974,25 @@
 
 #define	HADDR           		0x70
 
-#define	HODMAADR        		0x70
-
 #define	PLLDELAY        		0x70
 #define		SPLIT_DROP_REQ  	0x80
 
-#define	HCNT            		0x78
+#define	HODMAADR        		0x70
 
 #define	HODMACNT        		0x78
 
-#define	HODMAEN         		0x7a
+#define	HCNT            		0x78
 
-#define	SGHADDR         		0x7c
+#define	HODMAEN         		0x7a
 
 #define	SCBHADDR        		0x7c
 
-#define	SGHCNT          		0x84
+#define	SGHADDR         		0x7c
 
 #define	SCBHCNT         		0x84
 
+#define	SGHCNT          		0x84
+
 #define	DFF_THRSH       		0x88
 #define		WR_DFTHRSH      	0x70
 #define		RD_DFTHRSH      	0x07
@@ -2326,10 +2025,6 @@
 
 #define	CMCRXMSG0       		0x90
 
-#define	OVLYRXMSG0      		0x90
-
-#define	DCHRXMSG0       		0x90
-
 #define	ROENABLE        		0x90
 #define		MSIROEN         	0x20
 #define		OVLYROEN        	0x10
@@ -2338,12 +2033,12 @@
 #define		DCH1ROEN        	0x02
 #define		DCH0ROEN        	0x01
 
+#define	OVLYRXMSG0      		0x90
+
+#define	DCHRXMSG0       		0x90
+
 #define	OVLYRXMSG1      		0x91
 
-#define	CMCRXMSG1       		0x91
-
-#define	DCHRXMSG1       		0x91
-
 #define	NSENABLE        		0x91
 #define		MSINSEN         	0x20
 #define		OVLYNSEN        	0x10
@@ -2352,6 +2047,10 @@
 #define		DCH1NSEN        	0x02
 #define		DCH0NSEN        	0x01
 
+#define	CMCRXMSG1       		0x91
+
+#define	DCHRXMSG1       		0x91
+
 #define	DCHRXMSG2       		0x92
 
 #define	CMCRXMSG2       		0x92
@@ -2375,24 +2074,24 @@
 #define		TSCSERREN       	0x02
 #define		CMPABCDIS       	0x01
 
-#define	CMCSEQBCNT      		0x94
-
 #define	OVLYSEQBCNT     		0x94
 
 #define	DCHSEQBCNT      		0x94
 
+#define	CMCSEQBCNT      		0x94
+
+#define	CMCSPLTSTAT0    		0x96
+
 #define	DCHSPLTSTAT0    		0x96
 
 #define	OVLYSPLTSTAT0   		0x96
 
-#define	CMCSPLTSTAT0    		0x96
+#define	CMCSPLTSTAT1    		0x97
 
 #define	OVLYSPLTSTAT1   		0x97
 
 #define	DCHSPLTSTAT1    		0x97
 
-#define	CMCSPLTSTAT1    		0x97
-
 #define	SGRXMSG0        		0x98
 #define		CDNUM           	0xf8
 #define		CFNUM           	0x07
@@ -2420,15 +2119,18 @@
 #define		TAG_NUM         	0x1f
 #define		RLXORD          	0x10
 
+#define	SGSEQBCNT       		0x9c
+
 #define	SLVSPLTOUTATTR0 		0x9c
 #define		LOWER_BCNT      	0xff
 
-#define	SGSEQBCNT       		0x9c
-
 #define	SLVSPLTOUTATTR1 		0x9d
 #define		CMPLT_DNUM      	0xf8
 #define		CMPLT_FNUM      	0x07
 
+#define	SLVSPLTOUTATTR2 		0x9e
+#define		CMPLT_BNUM      	0xff
+
 #define	SGSPLTSTAT0     		0x9e
 #define		STAETERM        	0x80
 #define		SCBCERR         	0x40
@@ -2439,9 +2141,6 @@
 #define		RXSCEMSG        	0x02
 #define		RXSPLTRSP       	0x01
 
-#define	SLVSPLTOUTATTR2 		0x9e
-#define		CMPLT_BNUM      	0xff
-
 #define	SGSPLTSTAT1     		0x9f
 #define		RXDATABUCKET    	0x01
 
@@ -2497,10 +2196,10 @@
 
 #define	CCSGADDR        		0xac
 
-#define	CCSCBADDR       		0xac
-
 #define	CCSCBADR_BK     		0xac
 
+#define	CCSCBADDR       		0xac
+
 #define	CMC_RAMBIST     		0xad
 #define		SG_ELEMENT_SIZE 	0x80
 #define		SCBRAMBIST_FAIL 	0x40
@@ -2554,9 +2253,9 @@
 #define	SEEDAT          		0xbc
 
 #define	SEECTL          		0xbe
-#define		SEEOP_EWDS      	0x40
 #define		SEEOP_WALL      	0x40
 #define		SEEOP_EWEN      	0x40
+#define		SEEOP_EWDS      	0x40
 #define		SEEOPCODE       	0x70
 #define		SEERST          	0x02
 #define		SEESTART        	0x01
@@ -2573,25 +2272,25 @@
 
 #define	SCBCNT          		0xbf
 
+#define	DFWADDR         		0xc0
+
 #define	DSPFLTRCTL      		0xc0
 #define		FLTRDISABLE     	0x20
 #define		EDGESENSE       	0x10
 #define		DSPFCNTSEL      	0x0f
 
-#define	DFWADDR         		0xc0
-
 #define	DSPDATACTL      		0xc1
 #define		BYPASSENAB      	0x80
 #define		DESQDIS         	0x10
 #define		RCVROFFSTDIS    	0x04
 #define		XMITOFFSTDIS    	0x02
 
+#define	DFRADDR         		0xc2
+
 #define	DSPREQCTL       		0xc2
 #define		MANREQCTL       	0xc0
 #define		MANREQDLY       	0x3f
 
-#define	DFRADDR         		0xc2
-
 #define	DSPACKCTL       		0xc3
 #define		MANACKCTL       	0xc0
 #define		MANACKDLY       	0x3f
@@ -2612,14 +2311,14 @@
 
 #define	WRTBIASCALC     		0xc7
 
-#define	DFPTRS          		0xc8
-
 #define	RCVRBIASCALC    		0xc8
 
-#define	DFBKPTR         		0xc9
+#define	DFPTRS          		0xc8
 
 #define	SKEWCALC        		0xc9
 
+#define	DFBKPTR         		0xc9
+
 #define	DFDBCTL         		0xcb
 #define		DFF_CIO_WR_RDY  	0x20
 #define		DFF_CIO_RD_RDY  	0x10
@@ -2704,12 +2403,12 @@
 
 #define	ACCUM_SAVE      		0xfa
 
+#define	WAITING_SCB_TAILS		0x100
+
 #define	AHD_PCI_CONFIG_BASE		0x100
 
 #define	SRAM_BASE       		0x100
 
-#define	WAITING_SCB_TAILS		0x100
-
 #define	WAITING_TID_HEAD		0x120
 
 #define	WAITING_TID_TAIL		0x122
@@ -2738,8 +2437,8 @@
 #define		PRELOADEN       	0x80
 #define		WIDEODD         	0x40
 #define		SCSIEN          	0x20
-#define		SDMAENACK       	0x10
 #define		SDMAEN          	0x10
+#define		SDMAENACK       	0x10
 #define		HDMAEN          	0x08
 #define		HDMAENACK       	0x08
 #define		DIRECTION       	0x04
@@ -2837,12 +2536,12 @@
 
 #define	MK_MESSAGE_SCSIID		0x162
 
+#define	SCB_BASE        		0x180
+
 #define	SCB_RESIDUAL_DATACNT		0x180
 #define	SCB_CDB_STORE   		0x180
 #define	SCB_HOST_CDB_PTR		0x180
 
-#define	SCB_BASE        		0x180
-
 #define	SCB_RESIDUAL_SGPTR		0x184
 #define		SG_ADDR_MASK    	0xf8
 #define		SG_OVERRUN_RESID	0x02
@@ -2910,17 +2609,6 @@
 #define	SCB_DISCONNECTED_LISTS		0x1b8
 
 
-#define	CMD_GROUP_CODE_SHIFT	0x05
-#define	STIMESEL_MIN	0x18
-#define	STIMESEL_SHIFT	0x03
-#define	INVALID_ADDR	0x80
-#define	AHD_PRECOMP_MASK	0x07
-#define	TARGET_DATA_IN	0x01
-#define	CCSCBADDR_MAX	0x80
-#define	NUMDSPS 	0x14
-#define	SEEOP_EWEN_ADDR	0xc0
-#define	AHD_ANNEXCOL_PER_DEV0	0x04
-#define	DST_MODE_SHIFT	0x04
 #define	AHD_TIMER_MAX_US	0x18ffe7
 #define	AHD_TIMER_MAX_TICKS	0xffff
 #define	AHD_SENSE_BUFSIZE	0x100
@@ -2955,32 +2643,43 @@
 #define	LUNLEN_SINGLE_LEVEL_LUN	0x0f
 #define	NVRAM_SCB_OFFSET	0x2c
 #define	STATUS_PKT_SENSE	0xff
+#define	CMD_GROUP_CODE_SHIFT	0x05
 #define	MAX_OFFSET_PACED_BUG	0x7f
 #define	STIMESEL_BUG_ADJ	0x08
+#define	STIMESEL_MIN	0x18
+#define	STIMESEL_SHIFT	0x03
 #define	CCSGRAM_MAXSEGS	0x10
+#define	INVALID_ADDR	0x80
 #define	SEEOP_ERAL_ADDR	0x80
 #define	AHD_SLEWRATE_DEF_REVB	0x08
 #define	AHD_PRECOMP_CUTBACK_17	0x04
+#define	AHD_PRECOMP_MASK	0x07
 #define	SRC_MODE_SHIFT	0x00
 #define	PKT_OVERRUN_BUFSIZE	0x200
 #define	SCB_TRANSFER_SIZE_1BYTE_LUN	0x30
+#define	TARGET_DATA_IN	0x01
 #define	HOST_MSG	0xff
 #define	MAX_OFFSET	0xfe
 #define	BUS_16_BIT	0x01
+#define	CCSCBADDR_MAX	0x80
+#define	NUMDSPS 	0x14
+#define	SEEOP_EWEN_ADDR	0xc0
+#define	AHD_ANNEXCOL_PER_DEV0	0x04
+#define	DST_MODE_SHIFT	0x04
 
 
 /* Downloaded Constant Definitions */
-#define	SG_SIZEOF	0x04
-#define	SG_PREFETCH_ALIGN_MASK	0x02
-#define	SG_PREFETCH_CNT_LIMIT	0x01
 #define	CACHELINE_MASK	0x07
 #define	SCB_TRANSFER_SIZE	0x06
 #define	PKT_OVERRUN_BUFOFFSET	0x05
+#define	SG_SIZEOF	0x04
 #define	SG_PREFETCH_ADDR_MASK	0x03
+#define	SG_PREFETCH_ALIGN_MASK	0x02
+#define	SG_PREFETCH_CNT_LIMIT	0x01
 #define	SG_PREFETCH_CNT	0x00
 #define	DOWNLOAD_CONST_COUNT	0x08
 
 
 /* Exported Labels */
-#define	LABEL_timer_isr	0x28b
 #define	LABEL_seq_isr 	0x28f
+#define	LABEL_timer_isr	0x28b
diff --git a/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped b/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped
index c4c8a96..f5ea715 100644
--- a/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped
+++ b/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped
@@ -8,18 +8,6 @@
 
 #include "aic79xx_osm.h"
 
-static const ahd_reg_parse_entry_t MODE_PTR_parse_table[] = {
-	{ "SRC_MODE",		0x07, 0x07 },
-	{ "DST_MODE",		0x70, 0x70 }
-};
-
-int
-ahd_mode_ptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(MODE_PTR_parse_table, 2, "MODE_PTR",
-	    0x00, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t INTSTAT_parse_table[] = {
 	{ "SPLTINT",		0x01, 0x01 },
 	{ "CMDCMPLT",		0x02, 0x02 },
@@ -39,110 +27,6 @@
 	    0x01, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t SEQINTCODE_parse_table[] = {
-	{ "NO_SEQINT",		0x00, 0xff },
-	{ "BAD_PHASE",		0x01, 0xff },
-	{ "SEND_REJECT",	0x02, 0xff },
-	{ "PROTO_VIOLATION",	0x03, 0xff },
-	{ "NO_MATCH",		0x04, 0xff },
-	{ "IGN_WIDE_RES",	0x05, 0xff },
-	{ "PDATA_REINIT",	0x06, 0xff },
-	{ "HOST_MSG_LOOP",	0x07, 0xff },
-	{ "BAD_STATUS",		0x08, 0xff },
-	{ "DATA_OVERRUN",	0x09, 0xff },
-	{ "MKMSG_FAILED",	0x0a, 0xff },
-	{ "MISSED_BUSFREE",	0x0b, 0xff },
-	{ "DUMP_CARD_STATE",	0x0c, 0xff },
-	{ "ILLEGAL_PHASE",	0x0d, 0xff },
-	{ "INVALID_SEQINT",	0x0e, 0xff },
-	{ "CFG4ISTAT_INTR",	0x0f, 0xff },
-	{ "STATUS_OVERRUN",	0x10, 0xff },
-	{ "CFG4OVERRUN",	0x11, 0xff },
-	{ "ENTERING_NONPACK",	0x12, 0xff },
-	{ "TASKMGMT_FUNC_COMPLETE",0x13, 0xff },
-	{ "TASKMGMT_CMD_CMPLT_OKAY",0x14, 0xff },
-	{ "TRACEPOINT0",	0x15, 0xff },
-	{ "TRACEPOINT1",	0x16, 0xff },
-	{ "TRACEPOINT2",	0x17, 0xff },
-	{ "TRACEPOINT3",	0x18, 0xff },
-	{ "SAW_HWERR",		0x19, 0xff },
-	{ "BAD_SCB_STATUS",	0x1a, 0xff }
-};
-
-int
-ahd_seqintcode_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SEQINTCODE_parse_table, 27, "SEQINTCODE",
-	    0x02, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t CLRINT_parse_table[] = {
-	{ "CLRSPLTINT",		0x01, 0x01 },
-	{ "CLRCMDINT",		0x02, 0x02 },
-	{ "CLRSEQINT",		0x04, 0x04 },
-	{ "CLRSCSIINT",		0x08, 0x08 },
-	{ "CLRPCIINT",		0x10, 0x10 },
-	{ "CLRSWTMINT",		0x20, 0x20 },
-	{ "CLRBRKADRINT",	0x40, 0x40 },
-	{ "CLRHWERRINT",	0x80, 0x80 }
-};
-
-int
-ahd_clrint_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(CLRINT_parse_table, 8, "CLRINT",
-	    0x03, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t ERROR_parse_table[] = {
-	{ "DSCTMOUT",		0x02, 0x02 },
-	{ "ILLOPCODE",		0x04, 0x04 },
-	{ "SQPARERR",		0x08, 0x08 },
-	{ "DPARERR",		0x10, 0x10 },
-	{ "MPARERR",		0x20, 0x20 },
-	{ "CIOACCESFAIL",	0x40, 0x40 },
-	{ "CIOPARERR",		0x80, 0x80 }
-};
-
-int
-ahd_error_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(ERROR_parse_table, 7, "ERROR",
-	    0x04, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t HCNTRL_parse_table[] = {
-	{ "CHIPRST",		0x01, 0x01 },
-	{ "CHIPRSTACK",		0x01, 0x01 },
-	{ "INTEN",		0x02, 0x02 },
-	{ "PAUSE",		0x04, 0x04 },
-	{ "SWTIMER_START_B",	0x08, 0x08 },
-	{ "SWINT",		0x10, 0x10 },
-	{ "POWRDN",		0x40, 0x40 },
-	{ "SEQ_RESET",		0x80, 0x80 }
-};
-
-int
-ahd_hcntrl_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(HCNTRL_parse_table, 8, "HCNTRL",
-	    0x05, regvalue, cur_col, wrap));
-}
-
-int
-ahd_hnscb_qoff_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "HNSCB_QOFF",
-	    0x06, regvalue, cur_col, wrap));
-}
-
-int
-ahd_hescb_qoff_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "HESCB_QOFF",
-	    0x08, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t HS_MAILBOX_parse_table[] = {
 	{ "ENINT_COALESCE",	0x40, 0x40 },
 	{ "HOST_TQINPOS",	0x80, 0x80 }
@@ -170,77 +54,6 @@
 	    0x0c, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t CLRSEQINTSTAT_parse_table[] = {
-	{ "CLRSEQ_SPLTINT",	0x01, 0x01 },
-	{ "CLRSEQ_PCIINT",	0x02, 0x02 },
-	{ "CLRSEQ_SCSIINT",	0x04, 0x04 },
-	{ "CLRSEQ_SEQINT",	0x08, 0x08 },
-	{ "CLRSEQ_SWTMRTO",	0x10, 0x10 }
-};
-
-int
-ahd_clrseqintstat_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(CLRSEQINTSTAT_parse_table, 5, "CLRSEQINTSTAT",
-	    0x0c, regvalue, cur_col, wrap));
-}
-
-int
-ahd_swtimer_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SWTIMER",
-	    0x0e, regvalue, cur_col, wrap));
-}
-
-int
-ahd_snscb_qoff_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SNSCB_QOFF",
-	    0x10, regvalue, cur_col, wrap));
-}
-
-int
-ahd_sescb_qoff_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SESCB_QOFF",
-	    0x12, regvalue, cur_col, wrap));
-}
-
-int
-ahd_sdscb_qoff_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SDSCB_QOFF",
-	    0x14, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t QOFF_CTLSTA_parse_table[] = {
-	{ "SCB_QSIZE_4",	0x00, 0x0f },
-	{ "SCB_QSIZE_8",	0x01, 0x0f },
-	{ "SCB_QSIZE_16",	0x02, 0x0f },
-	{ "SCB_QSIZE_32",	0x03, 0x0f },
-	{ "SCB_QSIZE_64",	0x04, 0x0f },
-	{ "SCB_QSIZE_128",	0x05, 0x0f },
-	{ "SCB_QSIZE_256",	0x06, 0x0f },
-	{ "SCB_QSIZE_512",	0x07, 0x0f },
-	{ "SCB_QSIZE_1024",	0x08, 0x0f },
-	{ "SCB_QSIZE_2048",	0x09, 0x0f },
-	{ "SCB_QSIZE_4096",	0x0a, 0x0f },
-	{ "SCB_QSIZE_8192",	0x0b, 0x0f },
-	{ "SCB_QSIZE_16384",	0x0c, 0x0f },
-	{ "SCB_QSIZE",		0x0f, 0x0f },
-	{ "HS_MAILBOX_ACT",	0x10, 0x10 },
-	{ "SDSCB_ROLLOVR",	0x20, 0x20 },
-	{ "NEW_SCB_AVAIL",	0x40, 0x40 },
-	{ "EMPTY_SCB_AVAIL",	0x80, 0x80 }
-};
-
-int
-ahd_qoff_ctlsta_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(QOFF_CTLSTA_parse_table, 18, "QOFF_CTLSTA",
-	    0x16, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t INTCTL_parse_table[] = {
 	{ "SPLTINTEN",		0x01, 0x01 },
 	{ "SEQINTEN",		0x02, 0x02 },
@@ -280,22 +93,6 @@
 	    0x19, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t DSCOMMAND0_parse_table[] = {
-	{ "CIOPARCKEN",		0x01, 0x01 },
-	{ "DISABLE_TWATE",	0x02, 0x02 },
-	{ "EXTREQLCK",		0x10, 0x10 },
-	{ "MPARCKEN",		0x20, 0x20 },
-	{ "DPARCKEN",		0x40, 0x40 },
-	{ "CACHETHEN",		0x80, 0x80 }
-};
-
-int
-ahd_dscommand0_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(DSCOMMAND0_parse_table, 6, "DSCOMMAND0",
-	    0x19, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t DFSTATUS_parse_table[] = {
 	{ "FIFOEMP",		0x01, 0x01 },
 	{ "FIFOFULL",		0x02, 0x02 },
@@ -327,146 +124,6 @@
 	    0x1b, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t SG_CACHE_PRE_parse_table[] = {
-	{ "LAST_SEG",		0x02, 0x02 },
-	{ "ODD_SEG",		0x04, 0x04 },
-	{ "SG_ADDR_MASK",	0xf8, 0xf8 }
-};
-
-int
-ahd_sg_cache_pre_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SG_CACHE_PRE_parse_table, 3, "SG_CACHE_PRE",
-	    0x1b, regvalue, cur_col, wrap));
-}
-
-int
-ahd_lqin_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "LQIN",
-	    0x20, regvalue, cur_col, wrap));
-}
-
-int
-ahd_lunptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "LUNPTR",
-	    0x22, regvalue, cur_col, wrap));
-}
-
-int
-ahd_cmdlenptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "CMDLENPTR",
-	    0x25, regvalue, cur_col, wrap));
-}
-
-int
-ahd_attrptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "ATTRPTR",
-	    0x26, regvalue, cur_col, wrap));
-}
-
-int
-ahd_flagptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "FLAGPTR",
-	    0x27, regvalue, cur_col, wrap));
-}
-
-int
-ahd_cmdptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "CMDPTR",
-	    0x28, regvalue, cur_col, wrap));
-}
-
-int
-ahd_qnextptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "QNEXTPTR",
-	    0x29, regvalue, cur_col, wrap));
-}
-
-int
-ahd_abrtbyteptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "ABRTBYTEPTR",
-	    0x2b, regvalue, cur_col, wrap));
-}
-
-int
-ahd_abrtbitptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "ABRTBITPTR",
-	    0x2c, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t LUNLEN_parse_table[] = {
-	{ "ILUNLEN",		0x0f, 0x0f },
-	{ "TLUNLEN",		0xf0, 0xf0 }
-};
-
-int
-ahd_lunlen_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(LUNLEN_parse_table, 2, "LUNLEN",
-	    0x30, regvalue, cur_col, wrap));
-}
-
-int
-ahd_cdblimit_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "CDBLIMIT",
-	    0x31, regvalue, cur_col, wrap));
-}
-
-int
-ahd_maxcmd_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "MAXCMD",
-	    0x32, regvalue, cur_col, wrap));
-}
-
-int
-ahd_maxcmdcnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "MAXCMDCNT",
-	    0x33, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t LQCTL1_parse_table[] = {
-	{ "ABORTPENDING",	0x01, 0x01 },
-	{ "SINGLECMD",		0x02, 0x02 },
-	{ "PCI2PCI",		0x04, 0x04 }
-};
-
-int
-ahd_lqctl1_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(LQCTL1_parse_table, 3, "LQCTL1",
-	    0x38, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t LQCTL2_parse_table[] = {
-	{ "LQOPAUSE",		0x01, 0x01 },
-	{ "LQOTOIDLE",		0x02, 0x02 },
-	{ "LQOCONTINUE",	0x04, 0x04 },
-	{ "LQORETRY",		0x08, 0x08 },
-	{ "LQIPAUSE",		0x10, 0x10 },
-	{ "LQITOIDLE",		0x20, 0x20 },
-	{ "LQICONTINUE",	0x40, 0x40 },
-	{ "LQIRETRY",		0x80, 0x80 }
-};
-
-int
-ahd_lqctl2_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(LQCTL2_parse_table, 8, "LQCTL2",
-	    0x39, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t SCSISEQ0_parse_table[] = {
 	{ "SCSIRSTO",		0x01, 0x01 },
 	{ "FORCEBUSFREE",	0x10, 0x10 },
@@ -498,37 +155,6 @@
 	    0x3b, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t SXFRCTL0_parse_table[] = {
-	{ "SPIOEN",		0x08, 0x08 },
-	{ "BIOSCANCELEN",	0x10, 0x10 },
-	{ "DFPEXP",		0x40, 0x40 },
-	{ "DFON",		0x80, 0x80 }
-};
-
-int
-ahd_sxfrctl0_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SXFRCTL0_parse_table, 4, "SXFRCTL0",
-	    0x3c, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t SXFRCTL1_parse_table[] = {
-	{ "STPWEN",		0x01, 0x01 },
-	{ "ACTNEGEN",		0x02, 0x02 },
-	{ "ENSTIMER",		0x04, 0x04 },
-	{ "STIMESEL",		0x18, 0x18 },
-	{ "ENSPCHK",		0x20, 0x20 },
-	{ "ENSACHK",		0x40, 0x40 },
-	{ "BITBUCKET",		0x80, 0x80 }
-};
-
-int
-ahd_sxfrctl1_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SXFRCTL1_parse_table, 7, "SXFRCTL1",
-	    0x3d, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t DFFSTAT_parse_table[] = {
 	{ "CURRFIFO_0",		0x00, 0x03 },
 	{ "CURRFIFO_1",		0x01, 0x03 },
@@ -545,40 +171,6 @@
 	    0x3f, regvalue, cur_col, wrap));
 }
 
-int
-ahd_multargid_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "MULTARGID",
-	    0x40, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t SCSISIGO_parse_table[] = {
-	{ "P_DATAOUT",		0x00, 0xe0 },
-	{ "P_DATAOUT_DT",	0x20, 0xe0 },
-	{ "P_DATAIN",		0x40, 0xe0 },
-	{ "P_DATAIN_DT",	0x60, 0xe0 },
-	{ "P_COMMAND",		0x80, 0xe0 },
-	{ "P_MESGOUT",		0xa0, 0xe0 },
-	{ "P_STATUS",		0xc0, 0xe0 },
-	{ "P_MESGIN",		0xe0, 0xe0 },
-	{ "ACKO",		0x01, 0x01 },
-	{ "REQO",		0x02, 0x02 },
-	{ "BSYO",		0x04, 0x04 },
-	{ "SELO",		0x08, 0x08 },
-	{ "ATNO",		0x10, 0x10 },
-	{ "MSGO",		0x20, 0x20 },
-	{ "IOO",		0x40, 0x40 },
-	{ "CDO",		0x80, 0x80 },
-	{ "PHASE_MASK",		0xe0, 0xe0 }
-};
-
-int
-ahd_scsisigo_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SCSISIGO_parse_table, 17, "SCSISIGO",
-	    0x40, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t SCSISIGI_parse_table[] = {
 	{ "P_DATAOUT",		0x00, 0xe0 },
 	{ "P_DATAOUT_DT",	0x20, 0xe0 },
@@ -624,31 +216,12 @@
 }
 
 int
-ahd_scsidat_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SCSIDAT",
-	    0x44, regvalue, cur_col, wrap));
-}
-
-int
 ahd_scsibus_print(u_int regvalue, u_int *cur_col, u_int wrap)
 {
 	return (ahd_print_register(NULL, 0, "SCSIBUS",
 	    0x46, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t TARGIDIN_parse_table[] = {
-	{ "TARGID",		0x0f, 0x0f },
-	{ "CLKOUT",		0x80, 0x80 }
-};
-
-int
-ahd_targidin_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(TARGIDIN_parse_table, 2, "TARGIDIN",
-	    0x48, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t SELID_parse_table[] = {
 	{ "ONEBIT",		0x08, 0x08 },
 	{ "SELID_MASK",		0xf0, 0xf0 }
@@ -661,38 +234,6 @@
 	    0x49, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t OPTIONMODE_parse_table[] = {
-	{ "AUTO_MSGOUT_DE",	0x02, 0x02 },
-	{ "ENDGFORMCHK",	0x04, 0x04 },
-	{ "BUSFREEREV",		0x10, 0x10 },
-	{ "BIASCANCTL",		0x20, 0x20 },
-	{ "AUTOACKEN",		0x40, 0x40 },
-	{ "BIOSCANCTL",		0x80, 0x80 },
-	{ "OPTIONMODE_DEFAULTS",0x02, 0x02 }
-};
-
-int
-ahd_optionmode_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(OPTIONMODE_parse_table, 7, "OPTIONMODE",
-	    0x4a, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t SBLKCTL_parse_table[] = {
-	{ "SELWIDE",		0x02, 0x02 },
-	{ "ENAB20",		0x04, 0x04 },
-	{ "ENAB40",		0x08, 0x08 },
-	{ "DIAGLEDON",		0x40, 0x40 },
-	{ "DIAGLEDEN",		0x80, 0x80 }
-};
-
-int
-ahd_sblkctl_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SBLKCTL_parse_table, 5, "SBLKCTL",
-	    0x4a, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t SSTAT0_parse_table[] = {
 	{ "ARBDO",		0x01, 0x01 },
 	{ "SPIORDY",		0x02, 0x02 },
@@ -728,23 +269,6 @@
 	    0x4b, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t CLRSINT0_parse_table[] = {
-	{ "CLRARBDO",		0x01, 0x01 },
-	{ "CLRSPIORDY",		0x02, 0x02 },
-	{ "CLROVERRUN",		0x04, 0x04 },
-	{ "CLRIOERR",		0x08, 0x08 },
-	{ "CLRSELINGO",		0x10, 0x10 },
-	{ "CLRSELDI",		0x20, 0x20 },
-	{ "CLRSELDO",		0x40, 0x40 }
-};
-
-int
-ahd_clrsint0_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(CLRSINT0_parse_table, 7, "CLRSINT0",
-	    0x4b, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t SSTAT1_parse_table[] = {
 	{ "REQINIT",		0x01, 0x01 },
 	{ "STRB2FAST",		0x02, 0x02 },
@@ -763,23 +287,6 @@
 	    0x4c, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t CLRSINT1_parse_table[] = {
-	{ "CLRREQINIT",		0x01, 0x01 },
-	{ "CLRSTRB2FAST",	0x02, 0x02 },
-	{ "CLRSCSIPERR",	0x04, 0x04 },
-	{ "CLRBUSFREE",		0x08, 0x08 },
-	{ "CLRSCSIRSTI",	0x20, 0x20 },
-	{ "CLRATNO",		0x40, 0x40 },
-	{ "CLRSELTIMEO",	0x80, 0x80 }
-};
-
-int
-ahd_clrsint1_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(CLRSINT1_parse_table, 7, "CLRSINT1",
-	    0x4c, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t SSTAT2_parse_table[] = {
 	{ "BUSFREE_LQO",	0x40, 0xc0 },
 	{ "BUSFREE_DFF0",	0x80, 0xc0 },
@@ -800,20 +307,6 @@
 	    0x4d, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t CLRSINT2_parse_table[] = {
-	{ "CLRDMADONE",		0x01, 0x01 },
-	{ "CLRSDONE",		0x02, 0x02 },
-	{ "CLRWIDE_RES",	0x04, 0x04 },
-	{ "CLRNONPACKREQ",	0x20, 0x20 }
-};
-
-int
-ahd_clrsint2_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(CLRSINT2_parse_table, 4, "CLRSINT2",
-	    0x4d, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t PERRDIAG_parse_table[] = {
 	{ "DTERR",		0x01, 0x01 },
 	{ "DGFORMERR",		0x02, 0x02 },
@@ -833,26 +326,12 @@
 }
 
 int
-ahd_lqistate_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "LQISTATE",
-	    0x4e, regvalue, cur_col, wrap));
-}
-
-int
 ahd_soffcnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
 {
 	return (ahd_print_register(NULL, 0, "SOFFCNT",
 	    0x4f, regvalue, cur_col, wrap));
 }
 
-int
-ahd_lqostate_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "LQOSTATE",
-	    0x4f, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t LQISTAT0_parse_table[] = {
 	{ "LQIATNCMD",		0x01, 0x01 },
 	{ "LQIATNLQ",		0x02, 0x02 },
@@ -869,56 +348,6 @@
 	    0x50, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t LQIMODE0_parse_table[] = {
-	{ "ENLQIATNCMD",	0x01, 0x01 },
-	{ "ENLQIATNLQ",		0x02, 0x02 },
-	{ "ENLQIBADLQT",	0x04, 0x04 },
-	{ "ENLQICRCT2",		0x08, 0x08 },
-	{ "ENLQICRCT1",		0x10, 0x10 },
-	{ "ENLQIATNQASK",	0x20, 0x20 }
-};
-
-int
-ahd_lqimode0_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(LQIMODE0_parse_table, 6, "LQIMODE0",
-	    0x50, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t CLRLQIINT0_parse_table[] = {
-	{ "CLRLQIATNCMD",	0x01, 0x01 },
-	{ "CLRLQIATNLQ",	0x02, 0x02 },
-	{ "CLRLQIBADLQT",	0x04, 0x04 },
-	{ "CLRLQICRCT2",	0x08, 0x08 },
-	{ "CLRLQICRCT1",	0x10, 0x10 },
-	{ "CLRLQIATNQAS",	0x20, 0x20 }
-};
-
-int
-ahd_clrlqiint0_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(CLRLQIINT0_parse_table, 6, "CLRLQIINT0",
-	    0x50, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t LQIMODE1_parse_table[] = {
-	{ "ENLQIOVERI_NLQ",	0x01, 0x01 },
-	{ "ENLQIOVERI_LQ",	0x02, 0x02 },
-	{ "ENLQIBADLQI",	0x04, 0x04 },
-	{ "ENLQICRCI_NLQ",	0x08, 0x08 },
-	{ "ENLQICRCI_LQ",	0x10, 0x10 },
-	{ "ENLIQABORT",		0x20, 0x20 },
-	{ "ENLQIPHASE_NLQ",	0x40, 0x40 },
-	{ "ENLQIPHASE_LQ",	0x80, 0x80 }
-};
-
-int
-ahd_lqimode1_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(LQIMODE1_parse_table, 8, "LQIMODE1",
-	    0x51, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t LQISTAT1_parse_table[] = {
 	{ "LQIOVERI_NLQ",	0x01, 0x01 },
 	{ "LQIOVERI_LQ",	0x02, 0x02 },
@@ -937,24 +366,6 @@
 	    0x51, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t CLRLQIINT1_parse_table[] = {
-	{ "CLRLQIOVERI_NLQ",	0x01, 0x01 },
-	{ "CLRLQIOVERI_LQ",	0x02, 0x02 },
-	{ "CLRLQIBADLQI",	0x04, 0x04 },
-	{ "CLRLQICRCI_NLQ",	0x08, 0x08 },
-	{ "CLRLQICRCI_LQ",	0x10, 0x10 },
-	{ "CLRLIQABORT",	0x20, 0x20 },
-	{ "CLRLQIPHASE_NLQ",	0x40, 0x40 },
-	{ "CLRLQIPHASE_LQ",	0x80, 0x80 }
-};
-
-int
-ahd_clrlqiint1_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(CLRLQIINT1_parse_table, 8, "CLRLQIINT1",
-	    0x51, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t LQISTAT2_parse_table[] = {
 	{ "LQIGSAVAIL",		0x01, 0x01 },
 	{ "LQISTOPCMD",		0x02, 0x02 },
@@ -985,30 +396,6 @@
 	    0x53, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t SIMODE3_parse_table[] = {
-	{ "ENOSRAMPERR",	0x01, 0x01 },
-	{ "ENNTRAMPERR",	0x02, 0x02 }
-};
-
-int
-ahd_simode3_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SIMODE3_parse_table, 2, "SIMODE3",
-	    0x53, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t CLRSINT3_parse_table[] = {
-	{ "CLROSRAMPERR",	0x01, 0x01 },
-	{ "CLRNTRAMPERR",	0x02, 0x02 }
-};
-
-int
-ahd_clrsint3_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(CLRSINT3_parse_table, 2, "CLRSINT3",
-	    0x53, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t LQOSTAT0_parse_table[] = {
 	{ "LQOTCRC",		0x01, 0x01 },
 	{ "LQOATNPKT",		0x02, 0x02 },
@@ -1024,51 +411,6 @@
 	    0x54, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t CLRLQOINT0_parse_table[] = {
-	{ "CLRLQOTCRC",		0x01, 0x01 },
-	{ "CLRLQOATNPKT",	0x02, 0x02 },
-	{ "CLRLQOATNLQ",	0x04, 0x04 },
-	{ "CLRLQOSTOPT2",	0x08, 0x08 },
-	{ "CLRLQOTARGSCBPERR",	0x10, 0x10 }
-};
-
-int
-ahd_clrlqoint0_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(CLRLQOINT0_parse_table, 5, "CLRLQOINT0",
-	    0x54, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t LQOMODE0_parse_table[] = {
-	{ "ENLQOTCRC",		0x01, 0x01 },
-	{ "ENLQOATNPKT",	0x02, 0x02 },
-	{ "ENLQOATNLQ",		0x04, 0x04 },
-	{ "ENLQOSTOPT2",	0x08, 0x08 },
-	{ "ENLQOTARGSCBPERR",	0x10, 0x10 }
-};
-
-int
-ahd_lqomode0_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(LQOMODE0_parse_table, 5, "LQOMODE0",
-	    0x54, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t LQOMODE1_parse_table[] = {
-	{ "ENLQOPHACHGINPKT",	0x01, 0x01 },
-	{ "ENLQOBUSFREE",	0x02, 0x02 },
-	{ "ENLQOBADQAS",	0x04, 0x04 },
-	{ "ENLQOSTOPI2",	0x08, 0x08 },
-	{ "ENLQOINITSCBPERR",	0x10, 0x10 }
-};
-
-int
-ahd_lqomode1_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(LQOMODE1_parse_table, 5, "LQOMODE1",
-	    0x55, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t LQOSTAT1_parse_table[] = {
 	{ "LQOPHACHGINPKT",	0x01, 0x01 },
 	{ "LQOBUSFREE",		0x02, 0x02 },
@@ -1084,21 +426,6 @@
 	    0x55, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t CLRLQOINT1_parse_table[] = {
-	{ "CLRLQOPHACHGINPKT",	0x01, 0x01 },
-	{ "CLRLQOBUSFREE",	0x02, 0x02 },
-	{ "CLRLQOBADQAS",	0x04, 0x04 },
-	{ "CLRLQOSTOPI2",	0x08, 0x08 },
-	{ "CLRLQOINITSCBPERR",	0x10, 0x10 }
-};
-
-int
-ahd_clrlqoint1_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(CLRLQOINT1_parse_table, 5, "CLRLQOINT1",
-	    0x55, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t LQOSTAT2_parse_table[] = {
 	{ "LQOSTOP0",		0x01, 0x01 },
 	{ "LQOPHACHGOUTPKT",	0x02, 0x02 },
@@ -1113,13 +440,6 @@
 	    0x56, regvalue, cur_col, wrap));
 }
 
-int
-ahd_os_space_cnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "OS_SPACE_CNT",
-	    0x56, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t SIMODE1_parse_table[] = {
 	{ "ENREQINIT",		0x01, 0x01 },
 	{ "ENSTRB2FAST",	0x02, 0x02 },
@@ -1138,13 +458,6 @@
 	    0x57, regvalue, cur_col, wrap));
 }
 
-int
-ahd_gsfifo_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "GSFIFO",
-	    0x58, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t DFFSXFRCTL_parse_table[] = {
 	{ "RSTCHN",		0x01, 0x01 },
 	{ "CLRCHN",		0x02, 0x02 },
@@ -1159,44 +472,6 @@
 	    0x5a, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t LQOSCSCTL_parse_table[] = {
-	{ "LQONOCHKOVER",	0x01, 0x01 },
-	{ "LQONOHOLDLACK",	0x02, 0x02 },
-	{ "LQOBUSETDLY",	0x40, 0x40 },
-	{ "LQOH2A_VERSION",	0x80, 0x80 }
-};
-
-int
-ahd_lqoscsctl_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(LQOSCSCTL_parse_table, 4, "LQOSCSCTL",
-	    0x5a, regvalue, cur_col, wrap));
-}
-
-int
-ahd_nextscb_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "NEXTSCB",
-	    0x5a, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t CLRSEQINTSRC_parse_table[] = {
-	{ "CLRCFG4TCMD",	0x01, 0x01 },
-	{ "CLRCFG4ICMD",	0x02, 0x02 },
-	{ "CLRCFG4TSTAT",	0x04, 0x04 },
-	{ "CLRCFG4ISTAT",	0x08, 0x08 },
-	{ "CLRCFG4DATA",	0x10, 0x10 },
-	{ "CLRSAVEPTRS",	0x20, 0x20 },
-	{ "CLRCTXTDONE",	0x40, 0x40 }
-};
-
-int
-ahd_clrseqintsrc_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(CLRSEQINTSRC_parse_table, 7, "CLRSEQINTSRC",
-	    0x5b, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t SEQINTSRC_parse_table[] = {
 	{ "CFG4TCMD",		0x01, 0x01 },
 	{ "CFG4ICMD",		0x02, 0x02 },
@@ -1231,13 +506,6 @@
 	    0x5c, regvalue, cur_col, wrap));
 }
 
-int
-ahd_currscb_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "CURRSCB",
-	    0x5c, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t MDFFSTAT_parse_table[] = {
 	{ "FIFOFREE",		0x01, 0x01 },
 	{ "DATAINFIFO",		0x02, 0x02 },
@@ -1256,308 +524,12 @@
 }
 
 int
-ahd_lastscb_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "LASTSCB",
-	    0x5e, regvalue, cur_col, wrap));
-}
-
-int
-ahd_shaddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SHADDR",
-	    0x60, regvalue, cur_col, wrap));
-}
-
-int
-ahd_negoaddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "NEGOADDR",
-	    0x60, regvalue, cur_col, wrap));
-}
-
-int
-ahd_negperiod_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "NEGPERIOD",
-	    0x61, regvalue, cur_col, wrap));
-}
-
-int
-ahd_negoffset_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "NEGOFFSET",
-	    0x62, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t NEGPPROPTS_parse_table[] = {
-	{ "PPROPT_IUT",		0x01, 0x01 },
-	{ "PPROPT_DT",		0x02, 0x02 },
-	{ "PPROPT_QAS",		0x04, 0x04 },
-	{ "PPROPT_PACE",	0x08, 0x08 }
-};
-
-int
-ahd_negppropts_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NEGPPROPTS_parse_table, 4, "NEGPPROPTS",
-	    0x63, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t NEGCONOPTS_parse_table[] = {
-	{ "WIDEXFER",		0x01, 0x01 },
-	{ "ENAUTOATNO",		0x02, 0x02 },
-	{ "ENAUTOATNI",		0x04, 0x04 },
-	{ "ENSLOWCRC",		0x08, 0x08 },
-	{ "RTI_OVRDTRN",	0x10, 0x10 },
-	{ "RTI_WRTDIS",		0x20, 0x20 },
-	{ "ENSNAPSHOT",		0x40, 0x40 }
-};
-
-int
-ahd_negconopts_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NEGCONOPTS_parse_table, 7, "NEGCONOPTS",
-	    0x64, regvalue, cur_col, wrap));
-}
-
-int
-ahd_annexcol_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "ANNEXCOL",
-	    0x65, regvalue, cur_col, wrap));
-}
-
-int
-ahd_annexdat_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "ANNEXDAT",
-	    0x66, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t SCSCHKN_parse_table[] = {
-	{ "LSTSGCLRDIS",	0x01, 0x01 },
-	{ "SHVALIDSTDIS",	0x02, 0x02 },
-	{ "DFFACTCLR",		0x04, 0x04 },
-	{ "SDONEMSKDIS",	0x08, 0x08 },
-	{ "WIDERESEN",		0x10, 0x10 },
-	{ "CURRFIFODEF",	0x20, 0x20 },
-	{ "STSELSKIDDIS",	0x40, 0x40 },
-	{ "BIDICHKDIS",		0x80, 0x80 }
-};
-
-int
-ahd_scschkn_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SCSCHKN_parse_table, 8, "SCSCHKN",
-	    0x66, regvalue, cur_col, wrap));
-}
-
-int
-ahd_iownid_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "IOWNID",
-	    0x67, regvalue, cur_col, wrap));
-}
-
-int
-ahd_shcnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SHCNT",
-	    0x68, regvalue, cur_col, wrap));
-}
-
-int
-ahd_townid_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "TOWNID",
-	    0x69, regvalue, cur_col, wrap));
-}
-
-int
 ahd_seloid_print(u_int regvalue, u_int *cur_col, u_int wrap)
 {
 	return (ahd_print_register(NULL, 0, "SELOID",
 	    0x6b, regvalue, cur_col, wrap));
 }
 
-int
-ahd_haddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "HADDR",
-	    0x70, regvalue, cur_col, wrap));
-}
-
-int
-ahd_hcnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "HCNT",
-	    0x78, regvalue, cur_col, wrap));
-}
-
-int
-ahd_sghaddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SGHADDR",
-	    0x7c, regvalue, cur_col, wrap));
-}
-
-int
-ahd_scbhaddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SCBHADDR",
-	    0x7c, regvalue, cur_col, wrap));
-}
-
-int
-ahd_sghcnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SGHCNT",
-	    0x84, regvalue, cur_col, wrap));
-}
-
-int
-ahd_scbhcnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SCBHCNT",
-	    0x84, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t DFF_THRSH_parse_table[] = {
-	{ "WR_DFTHRSH_MIN",	0x00, 0x70 },
-	{ "RD_DFTHRSH_MIN",	0x00, 0x07 },
-	{ "RD_DFTHRSH_25",	0x01, 0x07 },
-	{ "RD_DFTHRSH_50",	0x02, 0x07 },
-	{ "RD_DFTHRSH_63",	0x03, 0x07 },
-	{ "RD_DFTHRSH_75",	0x04, 0x07 },
-	{ "RD_DFTHRSH_85",	0x05, 0x07 },
-	{ "RD_DFTHRSH_90",	0x06, 0x07 },
-	{ "RD_DFTHRSH_MAX",	0x07, 0x07 },
-	{ "WR_DFTHRSH_25",	0x10, 0x70 },
-	{ "WR_DFTHRSH_50",	0x20, 0x70 },
-	{ "WR_DFTHRSH_63",	0x30, 0x70 },
-	{ "WR_DFTHRSH_75",	0x40, 0x70 },
-	{ "WR_DFTHRSH_85",	0x50, 0x70 },
-	{ "WR_DFTHRSH_90",	0x60, 0x70 },
-	{ "WR_DFTHRSH_MAX",	0x70, 0x70 },
-	{ "RD_DFTHRSH",		0x07, 0x07 },
-	{ "WR_DFTHRSH",		0x70, 0x70 }
-};
-
-int
-ahd_dff_thrsh_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(DFF_THRSH_parse_table, 18, "DFF_THRSH",
-	    0x88, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t PCIXCTL_parse_table[] = {
-	{ "CMPABCDIS",		0x01, 0x01 },
-	{ "TSCSERREN",		0x02, 0x02 },
-	{ "SRSPDPEEN",		0x04, 0x04 },
-	{ "SPLTSTADIS",		0x08, 0x08 },
-	{ "SPLTSMADIS",		0x10, 0x10 },
-	{ "UNEXPSCIEN",		0x20, 0x20 },
-	{ "SERRPULSE",		0x80, 0x80 }
-};
-
-int
-ahd_pcixctl_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(PCIXCTL_parse_table, 7, "PCIXCTL",
-	    0x93, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t DCHSPLTSTAT0_parse_table[] = {
-	{ "RXSPLTRSP",		0x01, 0x01 },
-	{ "RXSCEMSG",		0x02, 0x02 },
-	{ "RXOVRUN",		0x04, 0x04 },
-	{ "CNTNOTCMPLT",	0x08, 0x08 },
-	{ "SCDATBUCKET",	0x10, 0x10 },
-	{ "SCADERR",		0x20, 0x20 },
-	{ "SCBCERR",		0x40, 0x40 },
-	{ "STAETERM",		0x80, 0x80 }
-};
-
-int
-ahd_dchspltstat0_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(DCHSPLTSTAT0_parse_table, 8, "DCHSPLTSTAT0",
-	    0x96, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t DCHSPLTSTAT1_parse_table[] = {
-	{ "RXDATABUCKET",	0x01, 0x01 }
-};
-
-int
-ahd_dchspltstat1_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(DCHSPLTSTAT1_parse_table, 1, "DCHSPLTSTAT1",
-	    0x97, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t SGSPLTSTAT0_parse_table[] = {
-	{ "RXSPLTRSP",		0x01, 0x01 },
-	{ "RXSCEMSG",		0x02, 0x02 },
-	{ "RXOVRUN",		0x04, 0x04 },
-	{ "CNTNOTCMPLT",	0x08, 0x08 },
-	{ "SCDATBUCKET",	0x10, 0x10 },
-	{ "SCADERR",		0x20, 0x20 },
-	{ "SCBCERR",		0x40, 0x40 },
-	{ "STAETERM",		0x80, 0x80 }
-};
-
-int
-ahd_sgspltstat0_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SGSPLTSTAT0_parse_table, 8, "SGSPLTSTAT0",
-	    0x9e, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t SGSPLTSTAT1_parse_table[] = {
-	{ "RXDATABUCKET",	0x01, 0x01 }
-};
-
-int
-ahd_sgspltstat1_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SGSPLTSTAT1_parse_table, 1, "SGSPLTSTAT1",
-	    0x9f, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t DF0PCISTAT_parse_table[] = {
-	{ "DPR",		0x01, 0x01 },
-	{ "TWATERR",		0x02, 0x02 },
-	{ "RDPERR",		0x04, 0x04 },
-	{ "SCAAPERR",		0x08, 0x08 },
-	{ "RTA",		0x10, 0x10 },
-	{ "RMA",		0x20, 0x20 },
-	{ "SSE",		0x40, 0x40 },
-	{ "DPE",		0x80, 0x80 }
-};
-
-int
-ahd_df0pcistat_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(DF0PCISTAT_parse_table, 8, "DF0PCISTAT",
-	    0xa0, regvalue, cur_col, wrap));
-}
-
-int
-ahd_reg0_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "REG0",
-	    0xa0, regvalue, cur_col, wrap));
-}
-
-int
-ahd_reg_isr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "REG_ISR",
-	    0xa4, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t SG_STATE_parse_table[] = {
 	{ "SEGS_AVAIL",		0x01, 0x01 },
 	{ "LOADING_NEEDED",	0x02, 0x02 },
@@ -1571,54 +543,6 @@
 	    0xa6, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t TARGPCISTAT_parse_table[] = {
-	{ "TWATERR",		0x02, 0x02 },
-	{ "STA",		0x08, 0x08 },
-	{ "SSE",		0x40, 0x40 },
-	{ "DPE",		0x80, 0x80 }
-};
-
-int
-ahd_targpcistat_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(TARGPCISTAT_parse_table, 4, "TARGPCISTAT",
-	    0xa7, regvalue, cur_col, wrap));
-}
-
-int
-ahd_scbptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SCBPTR",
-	    0xa8, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t SCBAUTOPTR_parse_table[] = {
-	{ "SCBPTR_OFF",		0x07, 0x07 },
-	{ "SCBPTR_ADDR",	0x38, 0x38 },
-	{ "AUSCBPTR_EN",	0x80, 0x80 }
-};
-
-int
-ahd_scbautoptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SCBAUTOPTR_parse_table, 3, "SCBAUTOPTR",
-	    0xab, regvalue, cur_col, wrap));
-}
-
-int
-ahd_ccsgaddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "CCSGADDR",
-	    0xac, regvalue, cur_col, wrap));
-}
-
-int
-ahd_ccscbaddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "CCSCBADDR",
-	    0xac, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t CCSCBCTL_parse_table[] = {
 	{ "CCSCBRESET",		0x01, 0x01 },
 	{ "CCSCBDIR",		0x04, 0x04 },
@@ -1651,138 +575,6 @@
 	    0xad, regvalue, cur_col, wrap));
 }
 
-int
-ahd_ccsgram_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "CCSGRAM",
-	    0xb0, regvalue, cur_col, wrap));
-}
-
-int
-ahd_ccscbram_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "CCSCBRAM",
-	    0xb0, regvalue, cur_col, wrap));
-}
-
-int
-ahd_brddat_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "BRDDAT",
-	    0xb8, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t BRDCTL_parse_table[] = {
-	{ "BRDSTB",		0x01, 0x01 },
-	{ "BRDRW",		0x02, 0x02 },
-	{ "BRDEN",		0x04, 0x04 },
-	{ "BRDADDR",		0x38, 0x38 },
-	{ "FLXARBREQ",		0x40, 0x40 },
-	{ "FLXARBACK",		0x80, 0x80 }
-};
-
-int
-ahd_brdctl_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(BRDCTL_parse_table, 6, "BRDCTL",
-	    0xb9, regvalue, cur_col, wrap));
-}
-
-int
-ahd_seeadr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SEEADR",
-	    0xba, regvalue, cur_col, wrap));
-}
-
-int
-ahd_seedat_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SEEDAT",
-	    0xbc, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t SEECTL_parse_table[] = {
-	{ "SEEOP_ERAL",		0x40, 0x70 },
-	{ "SEEOP_WRITE",	0x50, 0x70 },
-	{ "SEEOP_READ",		0x60, 0x70 },
-	{ "SEEOP_ERASE",	0x70, 0x70 },
-	{ "SEESTART",		0x01, 0x01 },
-	{ "SEERST",		0x02, 0x02 },
-	{ "SEEOPCODE",		0x70, 0x70 },
-	{ "SEEOP_EWEN",		0x40, 0x40 },
-	{ "SEEOP_WALL",		0x40, 0x40 },
-	{ "SEEOP_EWDS",		0x40, 0x40 }
-};
-
-int
-ahd_seectl_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SEECTL_parse_table, 10, "SEECTL",
-	    0xbe, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t SEESTAT_parse_table[] = {
-	{ "SEESTART",		0x01, 0x01 },
-	{ "SEEBUSY",		0x02, 0x02 },
-	{ "SEEARBACK",		0x04, 0x04 },
-	{ "LDALTID_L",		0x08, 0x08 },
-	{ "SEEOPCODE",		0x70, 0x70 },
-	{ "INIT_DONE",		0x80, 0x80 }
-};
-
-int
-ahd_seestat_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SEESTAT_parse_table, 6, "SEESTAT",
-	    0xbe, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t DSPDATACTL_parse_table[] = {
-	{ "XMITOFFSTDIS",	0x02, 0x02 },
-	{ "RCVROFFSTDIS",	0x04, 0x04 },
-	{ "DESQDIS",		0x10, 0x10 },
-	{ "BYPASSENAB",		0x80, 0x80 }
-};
-
-int
-ahd_dspdatactl_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(DSPDATACTL_parse_table, 4, "DSPDATACTL",
-	    0xc1, regvalue, cur_col, wrap));
-}
-
-int
-ahd_dfdat_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "DFDAT",
-	    0xc4, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t DSPSELECT_parse_table[] = {
-	{ "DSPSEL",		0x1f, 0x1f },
-	{ "AUTOINCEN",		0x80, 0x80 }
-};
-
-int
-ahd_dspselect_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(DSPSELECT_parse_table, 2, "DSPSELECT",
-	    0xc4, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t WRTBIASCTL_parse_table[] = {
-	{ "XMITMANVAL",		0x3f, 0x3f },
-	{ "AUTOXBCDIS",		0x80, 0x80 }
-};
-
-int
-ahd_wrtbiasctl_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(WRTBIASCTL_parse_table, 2, "WRTBIASCTL",
-	    0xc5, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t SEQCTL0_parse_table[] = {
 	{ "LOADRAM",		0x01, 0x01 },
 	{ "SEQRESET",		0x02, 0x02 },
@@ -1801,18 +593,6 @@
 	    0xd6, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t FLAGS_parse_table[] = {
-	{ "CARRY",		0x01, 0x01 },
-	{ "ZERO",		0x02, 0x02 }
-};
-
-int
-ahd_flags_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(FLAGS_parse_table, 2, "FLAGS",
-	    0xd8, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t SEQINTCTL_parse_table[] = {
 	{ "IRET",		0x01, 0x01 },
 	{ "INTMASK1",		0x02, 0x02 },
@@ -1831,118 +611,6 @@
 }
 
 int
-ahd_seqram_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SEQRAM",
-	    0xda, regvalue, cur_col, wrap));
-}
-
-int
-ahd_prgmcnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "PRGMCNT",
-	    0xde, regvalue, cur_col, wrap));
-}
-
-int
-ahd_accum_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "ACCUM",
-	    0xe0, regvalue, cur_col, wrap));
-}
-
-int
-ahd_sindex_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SINDEX",
-	    0xe2, regvalue, cur_col, wrap));
-}
-
-int
-ahd_dindex_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "DINDEX",
-	    0xe4, regvalue, cur_col, wrap));
-}
-
-int
-ahd_allones_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "ALLONES",
-	    0xe8, regvalue, cur_col, wrap));
-}
-
-int
-ahd_allzeros_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "ALLZEROS",
-	    0xea, regvalue, cur_col, wrap));
-}
-
-int
-ahd_none_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "NONE",
-	    0xea, regvalue, cur_col, wrap));
-}
-
-int
-ahd_sindir_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SINDIR",
-	    0xec, regvalue, cur_col, wrap));
-}
-
-int
-ahd_dindir_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "DINDIR",
-	    0xed, regvalue, cur_col, wrap));
-}
-
-int
-ahd_stack_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "STACK",
-	    0xf2, regvalue, cur_col, wrap));
-}
-
-int
-ahd_intvec1_addr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "INTVEC1_ADDR",
-	    0xf4, regvalue, cur_col, wrap));
-}
-
-int
-ahd_curaddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "CURADDR",
-	    0xf4, regvalue, cur_col, wrap));
-}
-
-int
-ahd_intvec2_addr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "INTVEC2_ADDR",
-	    0xf6, regvalue, cur_col, wrap));
-}
-
-int
-ahd_longjmp_addr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "LONGJMP_ADDR",
-	    0xf8, regvalue, cur_col, wrap));
-}
-
-int
-ahd_accum_save_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "ACCUM_SAVE",
-	    0xfa, regvalue, cur_col, wrap));
-}
-
-int
 ahd_sram_base_print(u_int regvalue, u_int *cur_col, u_int wrap)
 {
 	return (ahd_print_register(NULL, 0, "SRAM_BASE",
@@ -1950,69 +618,6 @@
 }
 
 int
-ahd_waiting_scb_tails_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "WAITING_SCB_TAILS",
-	    0x100, regvalue, cur_col, wrap));
-}
-
-int
-ahd_waiting_tid_head_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "WAITING_TID_HEAD",
-	    0x120, regvalue, cur_col, wrap));
-}
-
-int
-ahd_waiting_tid_tail_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "WAITING_TID_TAIL",
-	    0x122, regvalue, cur_col, wrap));
-}
-
-int
-ahd_next_queued_scb_addr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "NEXT_QUEUED_SCB_ADDR",
-	    0x124, regvalue, cur_col, wrap));
-}
-
-int
-ahd_complete_scb_head_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "COMPLETE_SCB_HEAD",
-	    0x128, regvalue, cur_col, wrap));
-}
-
-int
-ahd_complete_scb_dmainprog_head_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "COMPLETE_SCB_DMAINPROG_HEAD",
-	    0x12a, regvalue, cur_col, wrap));
-}
-
-int
-ahd_complete_dma_scb_head_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "COMPLETE_DMA_SCB_HEAD",
-	    0x12c, regvalue, cur_col, wrap));
-}
-
-int
-ahd_complete_dma_scb_tail_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "COMPLETE_DMA_SCB_TAIL",
-	    0x12e, regvalue, cur_col, wrap));
-}
-
-int
-ahd_complete_on_qfreeze_head_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "COMPLETE_ON_QFREEZE_HEAD",
-	    0x130, regvalue, cur_col, wrap));
-}
-
-int
 ahd_qfreeze_count_print(u_int regvalue, u_int *cur_col, u_int wrap)
 {
 	return (ahd_print_register(NULL, 0, "QFREEZE_COUNT",
@@ -2033,33 +638,6 @@
 	    0x136, regvalue, cur_col, wrap));
 }
 
-int
-ahd_msg_out_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "MSG_OUT",
-	    0x137, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t DMAPARAMS_parse_table[] = {
-	{ "FIFORESET",		0x01, 0x01 },
-	{ "FIFOFLUSH",		0x02, 0x02 },
-	{ "DIRECTION",		0x04, 0x04 },
-	{ "HDMAEN",		0x08, 0x08 },
-	{ "HDMAENACK",		0x08, 0x08 },
-	{ "SDMAEN",		0x10, 0x10 },
-	{ "SDMAENACK",		0x10, 0x10 },
-	{ "SCSIEN",		0x20, 0x20 },
-	{ "WIDEODD",		0x40, 0x40 },
-	{ "PRELOADEN",		0x80, 0x80 }
-};
-
-int
-ahd_dmaparams_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(DMAPARAMS_parse_table, 10, "DMAPARAMS",
-	    0x138, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t SEQ_FLAGS_parse_table[] = {
 	{ "NO_DISCONNECT",	0x01, 0x01 },
 	{ "SPHASE_PENDING",	0x02, 0x02 },
@@ -2079,20 +657,6 @@
 	    0x139, regvalue, cur_col, wrap));
 }
 
-int
-ahd_saved_scsiid_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SAVED_SCSIID",
-	    0x13a, regvalue, cur_col, wrap));
-}
-
-int
-ahd_saved_lun_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SAVED_LUN",
-	    0x13b, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t LASTPHASE_parse_table[] = {
 	{ "P_DATAOUT",		0x00, 0xe0 },
 	{ "P_DATAOUT_DT",	0x20, 0xe0 },
@@ -2116,96 +680,6 @@
 	    0x13c, regvalue, cur_col, wrap));
 }
 
-int
-ahd_qoutfifo_entry_valid_tag_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "QOUTFIFO_ENTRY_VALID_TAG",
-	    0x13d, regvalue, cur_col, wrap));
-}
-
-int
-ahd_kernel_tqinpos_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "KERNEL_TQINPOS",
-	    0x13e, regvalue, cur_col, wrap));
-}
-
-int
-ahd_tqinpos_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "TQINPOS",
-	    0x13f, regvalue, cur_col, wrap));
-}
-
-int
-ahd_shared_data_addr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SHARED_DATA_ADDR",
-	    0x140, regvalue, cur_col, wrap));
-}
-
-int
-ahd_qoutfifo_next_addr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "QOUTFIFO_NEXT_ADDR",
-	    0x144, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t ARG_1_parse_table[] = {
-	{ "CONT_MSG_LOOP_TARG",	0x02, 0x02 },
-	{ "CONT_MSG_LOOP_READ",	0x03, 0x03 },
-	{ "CONT_MSG_LOOP_WRITE",0x04, 0x04 },
-	{ "EXIT_MSG_LOOP",	0x08, 0x08 },
-	{ "MSGOUT_PHASEMIS",	0x10, 0x10 },
-	{ "SEND_REJ",		0x20, 0x20 },
-	{ "SEND_SENSE",		0x40, 0x40 },
-	{ "SEND_MSG",		0x80, 0x80 }
-};
-
-int
-ahd_arg_1_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(ARG_1_parse_table, 8, "ARG_1",
-	    0x148, regvalue, cur_col, wrap));
-}
-
-int
-ahd_arg_2_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "ARG_2",
-	    0x149, regvalue, cur_col, wrap));
-}
-
-int
-ahd_last_msg_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "LAST_MSG",
-	    0x14a, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t SCSISEQ_TEMPLATE_parse_table[] = {
-	{ "ALTSTIM",		0x01, 0x01 },
-	{ "ENAUTOATNP",		0x02, 0x02 },
-	{ "MANUALP",		0x0c, 0x0c },
-	{ "ENRSELI",		0x10, 0x10 },
-	{ "ENSELI",		0x20, 0x20 },
-	{ "MANUALCTL",		0x40, 0x40 }
-};
-
-int
-ahd_scsiseq_template_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SCSISEQ_TEMPLATE_parse_table, 6, "SCSISEQ_TEMPLATE",
-	    0x14b, regvalue, cur_col, wrap));
-}
-
-int
-ahd_initiator_tag_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "INITIATOR_TAG",
-	    0x14c, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t SEQ_FLAGS2_parse_table[] = {
 	{ "PENDING_MK_MESSAGE",	0x01, 0x01 },
 	{ "TARGET_MSG_PENDING",	0x02, 0x02 },
@@ -2220,62 +694,6 @@
 }
 
 int
-ahd_allocfifo_scbptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "ALLOCFIFO_SCBPTR",
-	    0x14e, regvalue, cur_col, wrap));
-}
-
-int
-ahd_int_coalescing_timer_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "INT_COALESCING_TIMER",
-	    0x150, regvalue, cur_col, wrap));
-}
-
-int
-ahd_int_coalescing_maxcmds_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "INT_COALESCING_MAXCMDS",
-	    0x152, regvalue, cur_col, wrap));
-}
-
-int
-ahd_int_coalescing_mincmds_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "INT_COALESCING_MINCMDS",
-	    0x153, regvalue, cur_col, wrap));
-}
-
-int
-ahd_cmds_pending_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "CMDS_PENDING",
-	    0x154, regvalue, cur_col, wrap));
-}
-
-int
-ahd_int_coalescing_cmdcount_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "INT_COALESCING_CMDCOUNT",
-	    0x156, regvalue, cur_col, wrap));
-}
-
-int
-ahd_local_hs_mailbox_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "LOCAL_HS_MAILBOX",
-	    0x157, regvalue, cur_col, wrap));
-}
-
-int
-ahd_cmdsize_table_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "CMDSIZE_TABLE",
-	    0x158, regvalue, cur_col, wrap));
-}
-
-int
 ahd_mk_message_scb_print(u_int regvalue, u_int *cur_col, u_int wrap)
 {
 	return (ahd_print_register(NULL, 0, "MK_MESSAGE_SCB",
@@ -2290,53 +708,12 @@
 }
 
 int
-ahd_scb_residual_datacnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SCB_RESIDUAL_DATACNT",
-	    0x180, regvalue, cur_col, wrap));
-}
-
-int
 ahd_scb_base_print(u_int regvalue, u_int *cur_col, u_int wrap)
 {
 	return (ahd_print_register(NULL, 0, "SCB_BASE",
 	    0x180, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t SCB_RESIDUAL_SGPTR_parse_table[] = {
-	{ "SG_LIST_NULL",	0x01, 0x01 },
-	{ "SG_OVERRUN_RESID",	0x02, 0x02 },
-	{ "SG_ADDR_MASK",	0xf8, 0xf8 }
-};
-
-int
-ahd_scb_residual_sgptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SCB_RESIDUAL_SGPTR_parse_table, 3, "SCB_RESIDUAL_SGPTR",
-	    0x184, regvalue, cur_col, wrap));
-}
-
-int
-ahd_scb_scsi_status_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SCB_SCSI_STATUS",
-	    0x188, regvalue, cur_col, wrap));
-}
-
-int
-ahd_scb_sense_busaddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SCB_SENSE_BUSADDR",
-	    0x18c, regvalue, cur_col, wrap));
-}
-
-int
-ahd_scb_tag_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SCB_TAG",
-	    0x190, regvalue, cur_col, wrap));
-}
-
 static const ahd_reg_parse_entry_t SCB_CONTROL_parse_table[] = {
 	{ "SCB_TAG_TYPE",	0x03, 0x03 },
 	{ "DISCONNECTED",	0x04, 0x04 },
@@ -2366,103 +743,3 @@
 	    0x193, regvalue, cur_col, wrap));
 }
 
-static const ahd_reg_parse_entry_t SCB_LUN_parse_table[] = {
-	{ "LID",		0xff, 0xff }
-};
-
-int
-ahd_scb_lun_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SCB_LUN_parse_table, 1, "SCB_LUN",
-	    0x194, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t SCB_TASK_ATTRIBUTE_parse_table[] = {
-	{ "SCB_XFERLEN_ODD",	0x01, 0x01 }
-};
-
-int
-ahd_scb_task_attribute_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SCB_TASK_ATTRIBUTE_parse_table, 1, "SCB_TASK_ATTRIBUTE",
-	    0x195, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t SCB_CDB_LEN_parse_table[] = {
-	{ "SCB_CDB_LEN_PTR",	0x80, 0x80 }
-};
-
-int
-ahd_scb_cdb_len_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SCB_CDB_LEN_parse_table, 1, "SCB_CDB_LEN",
-	    0x196, regvalue, cur_col, wrap));
-}
-
-int
-ahd_scb_task_management_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SCB_TASK_MANAGEMENT",
-	    0x197, regvalue, cur_col, wrap));
-}
-
-int
-ahd_scb_dataptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SCB_DATAPTR",
-	    0x198, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t SCB_DATACNT_parse_table[] = {
-	{ "SG_HIGH_ADDR_BITS",	0x7f, 0x7f },
-	{ "SG_LAST_SEG",	0x80, 0x80 }
-};
-
-int
-ahd_scb_datacnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SCB_DATACNT_parse_table, 2, "SCB_DATACNT",
-	    0x1a0, regvalue, cur_col, wrap));
-}
-
-static const ahd_reg_parse_entry_t SCB_SGPTR_parse_table[] = {
-	{ "SG_LIST_NULL",	0x01, 0x01 },
-	{ "SG_FULL_RESID",	0x02, 0x02 },
-	{ "SG_STATUS_VALID",	0x04, 0x04 }
-};
-
-int
-ahd_scb_sgptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(SCB_SGPTR_parse_table, 3, "SCB_SGPTR",
-	    0x1a4, regvalue, cur_col, wrap));
-}
-
-int
-ahd_scb_busaddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SCB_BUSADDR",
-	    0x1a8, regvalue, cur_col, wrap));
-}
-
-int
-ahd_scb_next_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SCB_NEXT",
-	    0x1ac, regvalue, cur_col, wrap));
-}
-
-int
-ahd_scb_next2_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SCB_NEXT2",
-	    0x1ae, regvalue, cur_col, wrap));
-}
-
-int
-ahd_scb_disconnected_lists_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahd_print_register(NULL, 0, "SCB_DISCONNECTED_LISTS",
-	    0x1b8, regvalue, cur_col, wrap));
-}
-
diff --git a/drivers/scsi/aic7xxx/aic7xxx.reg b/drivers/scsi/aic7xxx/aic7xxx.reg
index 0d2f763..9a96e55 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.reg
+++ b/drivers/scsi/aic7xxx/aic7xxx.reg
@@ -51,6 +51,17 @@
  */
 
 /*
+ * Registers marked "dont_generate_debug_code" are not (yet) referenced
+ * from the driver code, and this keyword inhibit generation
+ * of debug code for them.
+ *
+ * REG_PRETTY_PRINT config will complain if dont_generate_debug_code
+ * is added to the register which is referenced in the driver.
+ * Unreferenced register with no dont_generate_debug_code will result
+ * in dead code. No warning is issued.
+ */
+
+/*
  * SCSI Sequence Control (p. 3-11).
  * Each bit, when set starts a specific SCSI sequence on the bus
  */
@@ -97,6 +108,7 @@
 	field	ENSTIMER	0x04
 	field	ACTNEGEN	0x02
 	field	STPWEN		0x01	/* Powered Termination */
+	dont_generate_debug_code
 }
 
 /*
@@ -155,6 +167,7 @@
 	mask	P_MESGOUT	CDI|MSGI
 	mask	P_STATUS	CDI|IOI
 	mask	P_MESGIN	CDI|IOI|MSGI
+	dont_generate_debug_code
 }
 
 /* 
@@ -194,6 +207,7 @@
 	 */
 	alias	SCSIOFFSET
 	mask	SOFS_ULTRA2	0x7f		/* Sync offset U2 chips */
+	dont_generate_debug_code
 }
 
 /*
@@ -205,6 +219,7 @@
 register SCSIDATL {
 	address			0x006
 	access_mode RW
+	dont_generate_debug_code
 }
 
 register SCSIDATH {
@@ -223,6 +238,7 @@
 	address			0x008
 	size	3
 	access_mode RW
+	dont_generate_debug_code
 }
 
 /* ALT_MODE registers (Ultra2 and Ultra160 chips) */
@@ -248,6 +264,7 @@
 	field	AUTO_MSGOUT_DE		0x02
 	field	DIS_MSGIN_DUALEDGE	0x01
 	mask	OPTIONMODE_DEFAULTS	AUTO_MSGOUT_DE|DIS_MSGIN_DUALEDGE
+	dont_generate_debug_code
 }
 
 /* ALT_MODE register on Ultra160 chips */
@@ -256,6 +273,7 @@
 	size	2
 	access_mode RW
 	count		2
+	dont_generate_debug_code
 }
 
 /*
@@ -271,6 +289,7 @@
 	field	CLRSWRAP	0x08
 	field	CLRIOERR	0x08	/* Ultra2 Only */
 	field	CLRSPIORDY	0x02
+	dont_generate_debug_code
 }
 
 /*
@@ -306,6 +325,7 @@
 	field	CLRSCSIPERR	0x04
 	field	CLRPHASECHG	0x02
 	field	CLRREQINIT	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -360,6 +380,7 @@
 	access_mode RW
 	mask	TID		0xf0		/* Target ID mask */
 	mask	OID		0x0f		/* Our ID mask */
+	dont_generate_debug_code
 }
 
 /*
@@ -425,6 +446,7 @@
 	address			0x014
 	size	4
 	access_mode RO
+	dont_generate_debug_code
 }
 
 /*
@@ -441,6 +463,7 @@
 	field	STAGE2		0x02
 	field	STAGE1		0x01
 	alias	TARGIDIN
+	dont_generate_debug_code
 }
 
 /*
@@ -453,6 +476,7 @@
 	access_mode RW
 	mask	SELID_MASK	0xf0
 	field	ONEBIT		0x08
+	dont_generate_debug_code
 }
 
 register SCAMCTL {
@@ -473,6 +497,7 @@
 	size			2
 	access_mode RW
 	count		14
+	dont_generate_debug_code
 }
 
 /*
@@ -495,6 +520,7 @@
 	field	EEPROM		0x04	/* Writable external BIOS ROM */
 	field	ROM		0x02	/* Logic for accessing external ROM */
 	field	SSPIOCPS	0x01	/* Termination and cable detection */
+	dont_generate_debug_code
 }
 
 register BRDCTL	{
@@ -514,6 +540,7 @@
 	field	BRDDAT2		0x04
 	field	BRDRW_ULTRA2	0x02
 	field	BRDSTB_ULTRA2	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -551,6 +578,7 @@
 	field	SEECK		0x04
 	field	SEEDO		0x02
 	field	SEEDI		0x01
+	dont_generate_debug_code
 }
 /*
  * SCSI Block Control (p. 3-32)
@@ -601,6 +629,7 @@
 	address			0x061
 	access_mode RW
 	count		2
+	dont_generate_debug_code
 }
 
 /*
@@ -610,6 +639,7 @@
 register SEQADDR0 {
 	address			0x062
 	access_mode RW
+	dont_generate_debug_code
 }
 
 register SEQADDR1 {
@@ -617,6 +647,7 @@
 	access_mode RW
 	count		8
 	mask	SEQADDR1_MASK	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -627,35 +658,41 @@
 	address			0x064
 	access_mode RW
 	accumulator
+	dont_generate_debug_code
 }
 
 register SINDEX	{
 	address			0x065
 	access_mode RW
 	sindex
+	dont_generate_debug_code
 }
 
 register DINDEX {
 	address			0x066
 	access_mode RW
+	dont_generate_debug_code
 }
 
 register ALLONES {
 	address			0x069
 	access_mode RO
 	allones
+	dont_generate_debug_code
 }
 
 register ALLZEROS {
 	address			0x06a
 	access_mode RO
 	allzeros
+	dont_generate_debug_code
 }
 
 register NONE {
 	address			0x06a
 	access_mode WO
 	none
+	dont_generate_debug_code
 }
 
 register FLAGS {
@@ -664,16 +701,19 @@
 	count		18
 	field	ZERO		0x02
 	field	CARRY		0x01
+	dont_generate_debug_code
 }
 
 register SINDIR	{
 	address			0x06c
 	access_mode RO
+	dont_generate_debug_code
 }
 
 register DINDIR	 {
 	address			0x06d
 	access_mode WO
+	dont_generate_debug_code
 }
 
 register FUNCTION1 {
@@ -685,6 +725,7 @@
 	address			0x06f
 	access_mode RO
 	count		5
+	dont_generate_debug_code
 }
 
 const	STACK_SIZE	4
@@ -716,6 +757,7 @@
 	field	RAMPS		0x04	/* External SCB RAM Present */
 	field	USCBSIZE32	0x02	/* Use 32byte SCB Page Size */
 	field	CIOPARCKEN	0x01	/* Internal bus parity error enable */
+	dont_generate_debug_code
 }
 
 register DSCOMMAND1 {
@@ -724,6 +766,7 @@
 	mask	DSLATT		0xfc	/* PCI latency timer (non-ultra2) */
 	field	HADDLDSEL1	0x02	/* Host Address Load Select Bits */
 	field	HADDLDSEL0	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -735,6 +778,7 @@
 	count		2
 	mask	BOFF		0xf0
 	mask	BON		0x0f
+	dont_generate_debug_code
 }
 
 /*
@@ -749,6 +793,7 @@
 	mask	STBON		0x07
 	mask	DFTHRSH_100	0xc0
 	mask	DFTHRSH_75	0x80
+	dont_generate_debug_code
 }
 
 /* aic7850/55/60/70/80/95 only */
@@ -756,6 +801,7 @@
 	address			0x086
 	count		4
 	mask	DFTHRSH_100	0xc0
+	dont_generate_debug_code
 }
 
 /* aic7890/91/96/97 only */
@@ -764,6 +810,7 @@
 	mask	HOST_MAILBOX	0xF0
 	mask	SEQ_MAILBOX	0x0F
 	mask	HOST_TQINPOS	0x80	/* Boundary at either 0 or 128 */
+	dont_generate_debug_code
 }
 
 const	HOST_MAILBOX_SHIFT	4
@@ -784,6 +831,7 @@
 	field	INTEN		0x02
 	field	CHIPRST		0x01
 	field	CHIPRSTACK	0x01
+	dont_generate_debug_code
 }
 
 /*
@@ -795,12 +843,14 @@
 	address			0x088
 	size	4
 	access_mode RW
+	dont_generate_debug_code
 }
 
 register HCNT {
 	address			0x08c
 	size	3
 	access_mode RW
+	dont_generate_debug_code
 }
 
 /*
@@ -810,6 +860,7 @@
 register SCBPTR {
 	address			0x090
 	access_mode RW
+	dont_generate_debug_code
 }
 
 /*
@@ -878,6 +929,7 @@
 
 	mask	SEQINT_MASK	0xf0|SEQINT	/* SEQINT Status Codes */
 	mask	INT_PEND  (BRKADRINT|SEQINT|SCSIINT|CMDCMPLT)
+	dont_generate_debug_code
 }
 
 /*
@@ -911,6 +963,7 @@
 	field	CLRSCSIINT      0x04
 	field	CLRCMDINT 	0x02
 	field	CLRSEQINT 	0x01
+	dont_generate_debug_code
 }
 
 register DFCNTRL {
@@ -944,6 +997,7 @@
 register DFWADDR {
 	address			0x95
 	access_mode RW
+	dont_generate_debug_code
 }
 
 register DFRADDR {
@@ -954,6 +1008,7 @@
 register DFDAT {
 	address			0x099
 	access_mode RW
+	dont_generate_debug_code
 }
 
 /*
@@ -967,6 +1022,7 @@
 	count		1
 	field	SCBAUTO		0x80
 	mask	SCBCNT_MASK	0x1f
+	dont_generate_debug_code
 }
 
 /*
@@ -977,6 +1033,7 @@
 	address			0x09b
 	access_mode RW
 	count		12
+	dont_generate_debug_code
 }
 
 /*
@@ -996,6 +1053,7 @@
 	address			0x09d
 	access_mode WO
 	count		7
+	dont_generate_debug_code
 }
 
 register CRCCONTROL1 {
@@ -1008,6 +1066,7 @@
 	field	CRCREQCHKEN		0x10
 	field	TARGCRCENDEN		0x08
 	field	TARGCRCCNTEN		0x04
+	dont_generate_debug_code
 }
 
 
@@ -1040,6 +1099,7 @@
 	access_mode RW
 	count	    4
 	field	ALT_MODE	0x80
+	dont_generate_debug_code
 }
 
 /*
@@ -1053,24 +1113,31 @@
 		size	4
 		alias	SCB_RESIDUAL_DATACNT
 		alias	SCB_CDB_STORE
+		dont_generate_debug_code
 	}
 	SCB_RESIDUAL_SGPTR {
 		size	4
+		dont_generate_debug_code
 	}
 	SCB_SCSI_STATUS {
 		size	1
+		dont_generate_debug_code
 	}
 	SCB_TARGET_PHASES {
 		size	1
+		dont_generate_debug_code
 	}
 	SCB_TARGET_DATA_DIR {
 		size	1
+		dont_generate_debug_code
 	}
 	SCB_TARGET_ITAG {
 		size	1
+		dont_generate_debug_code
 	}
 	SCB_DATAPTR {
 		size	4
+		dont_generate_debug_code
 	}
 	SCB_DATACNT {
 		/*
@@ -1080,12 +1147,14 @@
 		size	4
 		field	SG_LAST_SEG		0x80	/* In the fourth byte */
 		mask	SG_HIGH_ADDR_BITS	0x7F	/* In the fourth byte */
+		dont_generate_debug_code
 	}
 	SCB_SGPTR {
 		size	4
 		field	SG_RESID_VALID	0x04	/* In the first byte */
 		field	SG_FULL_RESID	0x02	/* In the first byte */
 		field	SG_LIST_NULL	0x01	/* In the first byte */
+		dont_generate_debug_code
 	}
 	SCB_CONTROL {
 		size	1
@@ -1115,22 +1184,27 @@
 	}
 	SCB_CDB_LEN {
 		size	1
+		dont_generate_debug_code
 	}
 	SCB_SCSIRATE {
 		size	1
+		dont_generate_debug_code
 	}
 	SCB_SCSIOFFSET {
 		size	1
 		count	1
+		dont_generate_debug_code
 	}
 	SCB_NEXT {
 		size	1
+		dont_generate_debug_code
 	}
 	SCB_64_SPARE {
 		size	16
 	}
 	SCB_64_BTT {
 		size	16
+		dont_generate_debug_code
 	}
 }
 
@@ -1149,6 +1223,7 @@
 	field	CS_2840		0x04
 	field	CK_2840		0x02
 	field	DO_2840		0x01
+	dont_generate_debug_code
 }
 
 register STATUS_2840 {
@@ -1159,6 +1234,7 @@
 	mask	BIOS_SEL	0x60
 	mask	ADSEL		0x1e
 	field	DI_2840		0x01
+	dont_generate_debug_code
 }
 
 /* --------------------- AIC-7870-only definitions -------------------- */
@@ -1166,18 +1242,22 @@
 register CCHADDR {
 	address			0x0E0
 	size 8
+	dont_generate_debug_code
 }
 
 register CCHCNT {
 	address			0x0E8
+	dont_generate_debug_code
 }
 
 register CCSGRAM {
 	address			0x0E9
+	dont_generate_debug_code
 }
 
 register CCSGADDR {
 	address			0x0EA
+	dont_generate_debug_code
 }
 
 register CCSGCTL {
@@ -1186,11 +1266,13 @@
 	field	CCSGEN		0x08
 	field	SG_FETCH_NEEDED 0x02	/* Bit used for software state */
 	field	CCSGRESET	0x01
+	dont_generate_debug_code
 }
 
 register CCSCBCNT {
 	address			0xEF
 	count		1
+	dont_generate_debug_code
 }
 
 register CCSCBCTL {
@@ -1201,14 +1283,17 @@
 	field	CCSCBEN		0x08
 	field	CCSCBDIR	0x04
 	field	CCSCBRESET	0x01
+	dont_generate_debug_code
 }
 
 register CCSCBADDR {
 	address			0x0ED
+	dont_generate_debug_code
 }
 
 register CCSCBRAM {
 	address			0xEC
+	dont_generate_debug_code
 }
 
 /*
@@ -1218,23 +1303,28 @@
 	address			0x0F0
 	access_mode RW
 	count		3
+	dont_generate_debug_code
 }
 
 register CCSCBPTR {
 	address			0x0F1
+	dont_generate_debug_code
 }
 
 register HNSCB_QOFF {
 	address			0x0F4
 	count		4
+	dont_generate_debug_code
 }
 
 register SNSCB_QOFF {
 	address			0x0F6
+	dont_generate_debug_code
 }
 
 register SDSCB_QOFF {
 	address			0x0F8
+	dont_generate_debug_code
 }
 
 register QOFF_CTLSTA {
@@ -1244,6 +1334,7 @@
 	field	SDSCB_ROLLOVER	0x10
 	mask	SCB_QSIZE	0x07
 	mask	SCB_QSIZE_256	0x06
+	dont_generate_debug_code
 }
 
 register DFF_THRSH {
@@ -1267,6 +1358,7 @@
 	mask	WR_DFTHRSH_90	0x60
 	mask	WR_DFTHRSH_MAX	0x70
 	count	4
+	dont_generate_debug_code
 }
 
 register SG_CACHE_PRE {
@@ -1275,6 +1367,7 @@
 	mask	SG_ADDR_MASK	0xf8
 	field	LAST_SEG	0x02
 	field	LAST_SEG_DONE	0x01
+	dont_generate_debug_code
 }
 
 register SG_CACHE_SHADOW {
@@ -1283,6 +1376,7 @@
 	mask	SG_ADDR_MASK	0xf8
 	field	LAST_SEG	0x02
 	field	LAST_SEG_DONE	0x01
+	dont_generate_debug_code
 }
 /* ---------------------- Scratch RAM Offsets ------------------------- */
 /* These offsets are either to values that are initialized by the board's
@@ -1309,6 +1403,7 @@
 	BUSY_TARGETS {
 		alias		TARG_SCSIRATE
 		size		16
+		dont_generate_debug_code
 	}
 	/*
 	 * Bit vector of targets that have ULTRA enabled as set by
@@ -1321,6 +1416,7 @@
 		alias		CMDSIZE_TABLE
 		size		2
 		count		2
+		dont_generate_debug_code
 	}
 	/*
 	 * Bit vector of targets that have disconnection disabled as set by
@@ -1331,6 +1427,7 @@
 	DISC_DSB {
 		size		2
 		count		6
+		dont_generate_debug_code
 	}
 	CMDSIZE_TABLE_TAIL {
 		size		4
@@ -1341,12 +1438,14 @@
 	 */
 	MWI_RESIDUAL {
 		size		1
+		dont_generate_debug_code
 	}
 	/*
 	 * SCBID of the next SCB to be started by the controller.
 	 */
 	NEXT_QUEUED_SCB {
 		size		1
+		dont_generate_debug_code
 	}
 	/*
 	 * Single byte buffer used to designate the type or message
@@ -1354,6 +1453,7 @@
 	 */
 	MSG_OUT {
 		size		1
+		dont_generate_debug_code
 	}
 	/* Parameters for DMA Logic */
 	DMAPARAMS {
@@ -1369,6 +1469,7 @@
 		field	DIRECTION	0x04	/* Set indicates PCI->SCSI */
 		field	FIFOFLUSH	0x02
 		field	FIFORESET	0x01
+		dont_generate_debug_code
 	}
 	SEQ_FLAGS {
 		size		1
@@ -1390,9 +1491,11 @@
 	 */
 	SAVED_SCSIID {
 		size		1
+		dont_generate_debug_code
 	}
 	SAVED_LUN {
 		size		1
+		dont_generate_debug_code
 	}
 	/*
 	 * The last bus phase as seen by the sequencer. 
@@ -1417,6 +1520,7 @@
 	 */
 	WAITING_SCBH {
 		size		1
+		dont_generate_debug_code
 	}
 	/*
 	 * head of list of SCBs that are
@@ -1425,6 +1529,7 @@
 	 */
 	DISCONNECTED_SCBH {
 		size		1
+		dont_generate_debug_code
 	}
 	/*
 	 * head of list of SCBs that are
@@ -1432,6 +1537,7 @@
 	 */
 	FREE_SCBH {
 		size		1
+		dont_generate_debug_code
 	}
 	/*
 	 * head of list of SCBs that have
@@ -1446,6 +1552,7 @@
 	 */
 	HSCB_ADDR {
 		size		4
+		dont_generate_debug_code
 	}
 	/*
 	 * Base address of our shared data with the kernel driver in host
@@ -1454,15 +1561,19 @@
 	 */
 	SHARED_DATA_ADDR {
 		size		4
+		dont_generate_debug_code
 	}
 	KERNEL_QINPOS {
 		size		1
+		dont_generate_debug_code
 	}
 	QINPOS {
 		size		1
+		dont_generate_debug_code
 	}
 	QOUTPOS {
 		size		1
+		dont_generate_debug_code
 	}
 	/*
 	 * Kernel and sequencer offsets into the queue of
@@ -1471,9 +1582,11 @@
 	 */
 	KERNEL_TQINPOS {
 		size		1
+		dont_generate_debug_code
 	}
 	TQINPOS {
 		size		1
+		dont_generate_debug_code
 	}
 	ARG_1 {
 		size		1
@@ -1486,10 +1599,12 @@
 		mask	CONT_MSG_LOOP		0x04
 		mask	CONT_TARG_SESSION	0x02
 		alias	RETURN_1
+		dont_generate_debug_code
 	}
 	ARG_2 {
 		size		1
 		alias	RETURN_2
+		dont_generate_debug_code
 	}
 
 	/*
@@ -1498,6 +1613,7 @@
 	LAST_MSG {
 		size		1
 		alias	TARG_IMMEDIATE_SCB
+		dont_generate_debug_code
 	}
 
 	/*
@@ -1513,6 +1629,7 @@
 		field	ENAUTOATNO	0x08
 		field	ENAUTOATNI	0x04
 		field	ENAUTOATNP	0x02
+		dont_generate_debug_code
 	}
 }
 
@@ -1533,12 +1650,14 @@
 		field	HA_274_EXTENDED_TRANS	0x01
 		alias	INITIATOR_TAG
 		count		1
+		dont_generate_debug_code
 	}
 
 	SEQ_FLAGS2 {
 		size	1
 		field	SCB_DMA			0x01
 		field	TARGET_MSG_PENDING	0x02
+		dont_generate_debug_code
 	}
 }
 
@@ -1562,6 +1681,7 @@
 		field	ENSPCHK		0x20
 		mask	HSCSIID		0x07	/* our SCSI ID */
 		mask	HWSCSIID	0x0f	/* our SCSI ID if Wide Bus */
+		dont_generate_debug_code
 	}
 	INTDEF {
 		address		0x05c
@@ -1569,11 +1689,13 @@
 		count		1
 		field	EDGE_TRIG	0x80
 		mask	VECTOR		0x0f
+		dont_generate_debug_code
 	}
 	HOSTCONF {
 		address		0x05d
 		size		1
 		count		1
+		dont_generate_debug_code
 	}
 	HA_274_BIOSCTRL	{
 		address		0x05f
@@ -1582,6 +1704,7 @@
 		mask	BIOSMODE		0x30
 		mask	BIOSDISABLED		0x30	
 		field	CHANNEL_B_PRIMARY	0x08
+		dont_generate_debug_code
 	}
 }
 
@@ -1595,6 +1718,7 @@
 	TARG_OFFSET {
 		size		16
 		count		1
+		dont_generate_debug_code
 	}
 }
 
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index 0ae2b46..e6f2bb7 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -814,6 +814,7 @@
 static void
 ahc_restart(struct ahc_softc *ahc)
 {
+	uint8_t	sblkctl;
 
 	ahc_pause(ahc);
 
@@ -868,6 +869,12 @@
 	ahc_outb(ahc, SEQADDR0, 0);
 	ahc_outb(ahc, SEQADDR1, 0);
 
+	/*
+	 * Take the LED out of diagnostic mode on PM resume, too
+	 */
+	sblkctl = ahc_inb(ahc, SBLKCTL);
+	ahc_outb(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON)));
+
 	ahc_unpause(ahc);
 }
 
diff --git a/drivers/scsi/aic7xxx/aic7xxx_reg.h_shipped b/drivers/scsi/aic7xxx/aic7xxx_reg.h_shipped
index 2ce1feb..e821082 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_reg.h_shipped
+++ b/drivers/scsi/aic7xxx/aic7xxx_reg.h_shipped
@@ -27,20 +27,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_sxfrctl1_print;
-#else
-#define ahc_sxfrctl1_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SXFRCTL1", 0x02, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scsisigo_print;
-#else
-#define ahc_scsisigo_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCSISIGO", 0x03, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahc_reg_print_t ahc_scsisigi_print;
 #else
 #define ahc_scsisigi_print(regvalue, cur_col, wrap) \
@@ -55,55 +41,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scsiid_print;
-#else
-#define ahc_scsiid_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCSIID", 0x05, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scsidatl_print;
-#else
-#define ahc_scsidatl_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCSIDATL", 0x06, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scsidath_print;
-#else
-#define ahc_scsidath_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCSIDATH", 0x07, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_stcnt_print;
-#else
-#define ahc_stcnt_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "STCNT", 0x08, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_optionmode_print;
-#else
-#define ahc_optionmode_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "OPTIONMODE", 0x08, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_targcrccnt_print;
-#else
-#define ahc_targcrccnt_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "TARGCRCCNT", 0x0a, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_clrsint0_print;
-#else
-#define ahc_clrsint0_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "CLRSINT0", 0x0b, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahc_reg_print_t ahc_sstat0_print;
 #else
 #define ahc_sstat0_print(regvalue, cur_col, wrap) \
@@ -111,13 +48,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_clrsint1_print;
-#else
-#define ahc_clrsint1_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "CLRSINT1", 0x0c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahc_reg_print_t ahc_sstat1_print;
 #else
 #define ahc_sstat1_print(regvalue, cur_col, wrap) \
@@ -139,13 +69,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scsiid_ultra2_print;
-#else
-#define ahc_scsiid_ultra2_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCSIID_ULTRA2", 0x0f, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahc_reg_print_t ahc_simode0_print;
 #else
 #define ahc_simode0_print(regvalue, cur_col, wrap) \
@@ -167,76 +90,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scsibush_print;
-#else
-#define ahc_scsibush_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCSIBUSH", 0x13, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_sxfrctl2_print;
-#else
-#define ahc_sxfrctl2_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SXFRCTL2", 0x13, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_shaddr_print;
-#else
-#define ahc_shaddr_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SHADDR", 0x14, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_seltimer_print;
-#else
-#define ahc_seltimer_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SELTIMER", 0x18, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_selid_print;
-#else
-#define ahc_selid_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SELID", 0x19, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scamctl_print;
-#else
-#define ahc_scamctl_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCAMCTL", 0x1a, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_targid_print;
-#else
-#define ahc_targid_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "TARGID", 0x1b, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_spiocap_print;
-#else
-#define ahc_spiocap_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SPIOCAP", 0x1b, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_brdctl_print;
-#else
-#define ahc_brdctl_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "BRDCTL", 0x1d, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_seectl_print;
-#else
-#define ahc_seectl_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SEECTL", 0x1e, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahc_reg_print_t ahc_sblkctl_print;
 #else
 #define ahc_sblkctl_print(regvalue, cur_col, wrap) \
@@ -244,62 +97,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_busy_targets_print;
-#else
-#define ahc_busy_targets_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "BUSY_TARGETS", 0x20, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_ultra_enb_print;
-#else
-#define ahc_ultra_enb_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "ULTRA_ENB", 0x30, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_disc_dsb_print;
-#else
-#define ahc_disc_dsb_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "DISC_DSB", 0x32, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_cmdsize_table_tail_print;
-#else
-#define ahc_cmdsize_table_tail_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "CMDSIZE_TABLE_TAIL", 0x34, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_mwi_residual_print;
-#else
-#define ahc_mwi_residual_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "MWI_RESIDUAL", 0x38, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_next_queued_scb_print;
-#else
-#define ahc_next_queued_scb_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "NEXT_QUEUED_SCB", 0x39, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_msg_out_print;
-#else
-#define ahc_msg_out_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "MSG_OUT", 0x3a, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_dmaparams_print;
-#else
-#define ahc_dmaparams_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "DMAPARAMS", 0x3b, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahc_reg_print_t ahc_seq_flags_print;
 #else
 #define ahc_seq_flags_print(regvalue, cur_col, wrap) \
@@ -307,20 +104,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_saved_scsiid_print;
-#else
-#define ahc_saved_scsiid_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SAVED_SCSIID", 0x3d, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_saved_lun_print;
-#else
-#define ahc_saved_lun_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SAVED_LUN", 0x3e, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahc_reg_print_t ahc_lastphase_print;
 #else
 #define ahc_lastphase_print(regvalue, cur_col, wrap) \
@@ -328,153 +111,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_waiting_scbh_print;
-#else
-#define ahc_waiting_scbh_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "WAITING_SCBH", 0x40, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_disconnected_scbh_print;
-#else
-#define ahc_disconnected_scbh_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "DISCONNECTED_SCBH", 0x41, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_free_scbh_print;
-#else
-#define ahc_free_scbh_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "FREE_SCBH", 0x42, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_complete_scbh_print;
-#else
-#define ahc_complete_scbh_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "COMPLETE_SCBH", 0x43, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_hscb_addr_print;
-#else
-#define ahc_hscb_addr_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "HSCB_ADDR", 0x44, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_shared_data_addr_print;
-#else
-#define ahc_shared_data_addr_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SHARED_DATA_ADDR", 0x48, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_kernel_qinpos_print;
-#else
-#define ahc_kernel_qinpos_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "KERNEL_QINPOS", 0x4c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_qinpos_print;
-#else
-#define ahc_qinpos_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "QINPOS", 0x4d, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_qoutpos_print;
-#else
-#define ahc_qoutpos_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "QOUTPOS", 0x4e, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_kernel_tqinpos_print;
-#else
-#define ahc_kernel_tqinpos_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "KERNEL_TQINPOS", 0x4f, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_tqinpos_print;
-#else
-#define ahc_tqinpos_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "TQINPOS", 0x50, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_arg_1_print;
-#else
-#define ahc_arg_1_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "ARG_1", 0x51, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_arg_2_print;
-#else
-#define ahc_arg_2_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "ARG_2", 0x52, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_last_msg_print;
-#else
-#define ahc_last_msg_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "LAST_MSG", 0x53, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scsiseq_template_print;
-#else
-#define ahc_scsiseq_template_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCSISEQ_TEMPLATE", 0x54, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_ha_274_biosglobal_print;
-#else
-#define ahc_ha_274_biosglobal_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "HA_274_BIOSGLOBAL", 0x56, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_seq_flags2_print;
-#else
-#define ahc_seq_flags2_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SEQ_FLAGS2", 0x57, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scsiconf_print;
-#else
-#define ahc_scsiconf_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCSICONF", 0x5a, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_intdef_print;
-#else
-#define ahc_intdef_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "INTDEF", 0x5c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_hostconf_print;
-#else
-#define ahc_hostconf_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "HOSTCONF", 0x5d, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_ha_274_biosctrl_print;
-#else
-#define ahc_ha_274_biosctrl_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "HA_274_BIOSCTRL", 0x5f, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahc_reg_print_t ahc_seqctl_print;
 #else
 #define ahc_seqctl_print(regvalue, cur_col, wrap) \
@@ -482,111 +118,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_seqram_print;
-#else
-#define ahc_seqram_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SEQRAM", 0x61, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_seqaddr0_print;
-#else
-#define ahc_seqaddr0_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SEQADDR0", 0x62, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_seqaddr1_print;
-#else
-#define ahc_seqaddr1_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SEQADDR1", 0x63, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_accum_print;
-#else
-#define ahc_accum_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "ACCUM", 0x64, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_sindex_print;
-#else
-#define ahc_sindex_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SINDEX", 0x65, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_dindex_print;
-#else
-#define ahc_dindex_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "DINDEX", 0x66, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_allones_print;
-#else
-#define ahc_allones_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "ALLONES", 0x69, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_allzeros_print;
-#else
-#define ahc_allzeros_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "ALLZEROS", 0x6a, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_none_print;
-#else
-#define ahc_none_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "NONE", 0x6a, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_flags_print;
-#else
-#define ahc_flags_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "FLAGS", 0x6b, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_sindir_print;
-#else
-#define ahc_sindir_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SINDIR", 0x6c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_dindir_print;
-#else
-#define ahc_dindir_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "DINDIR", 0x6d, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_function1_print;
-#else
-#define ahc_function1_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "FUNCTION1", 0x6e, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_stack_print;
-#else
-#define ahc_stack_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "STACK", 0x6f, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_targ_offset_print;
-#else
-#define ahc_targ_offset_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "TARG_OFFSET", 0x70, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahc_reg_print_t ahc_sram_base_print;
 #else
 #define ahc_sram_base_print(regvalue, cur_col, wrap) \
@@ -594,97 +125,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_bctl_print;
-#else
-#define ahc_bctl_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "BCTL", 0x84, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_dscommand0_print;
-#else
-#define ahc_dscommand0_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "DSCOMMAND0", 0x84, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_bustime_print;
-#else
-#define ahc_bustime_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "BUSTIME", 0x85, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_dscommand1_print;
-#else
-#define ahc_dscommand1_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "DSCOMMAND1", 0x85, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_busspd_print;
-#else
-#define ahc_busspd_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "BUSSPD", 0x86, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_hs_mailbox_print;
-#else
-#define ahc_hs_mailbox_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "HS_MAILBOX", 0x86, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_dspcistatus_print;
-#else
-#define ahc_dspcistatus_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "DSPCISTATUS", 0x86, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_hcntrl_print;
-#else
-#define ahc_hcntrl_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "HCNTRL", 0x87, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_haddr_print;
-#else
-#define ahc_haddr_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "HADDR", 0x88, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_hcnt_print;
-#else
-#define ahc_hcnt_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "HCNT", 0x8c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scbptr_print;
-#else
-#define ahc_scbptr_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCBPTR", 0x90, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_intstat_print;
-#else
-#define ahc_intstat_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "INTSTAT", 0x91, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_clrint_print;
-#else
-#define ahc_clrint_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "CLRINT", 0x92, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahc_reg_print_t ahc_error_print;
 #else
 #define ahc_error_print(regvalue, cur_col, wrap) \
@@ -706,69 +146,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_dfwaddr_print;
-#else
-#define ahc_dfwaddr_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "DFWADDR", 0x95, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_dfraddr_print;
-#else
-#define ahc_dfraddr_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "DFRADDR", 0x97, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_dfdat_print;
-#else
-#define ahc_dfdat_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "DFDAT", 0x99, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scbcnt_print;
-#else
-#define ahc_scbcnt_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCBCNT", 0x9a, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_qinfifo_print;
-#else
-#define ahc_qinfifo_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "QINFIFO", 0x9b, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_qincnt_print;
-#else
-#define ahc_qincnt_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "QINCNT", 0x9c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_qoutfifo_print;
-#else
-#define ahc_qoutfifo_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "QOUTFIFO", 0x9d, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_crccontrol1_print;
-#else
-#define ahc_crccontrol1_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "CRCCONTROL1", 0x9d, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_qoutcnt_print;
-#else
-#define ahc_qoutcnt_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "QOUTCNT", 0x9e, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahc_reg_print_t ahc_scsiphase_print;
 #else
 #define ahc_scsiphase_print(regvalue, cur_col, wrap) \
@@ -776,13 +153,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_sfunct_print;
-#else
-#define ahc_sfunct_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SFUNCT", 0x9f, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahc_reg_print_t ahc_scb_base_print;
 #else
 #define ahc_scb_base_print(regvalue, cur_col, wrap) \
@@ -790,69 +160,6 @@
 #endif
 
 #if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scb_cdb_ptr_print;
-#else
-#define ahc_scb_cdb_ptr_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCB_CDB_PTR", 0xa0, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scb_residual_sgptr_print;
-#else
-#define ahc_scb_residual_sgptr_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCB_RESIDUAL_SGPTR", 0xa4, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scb_scsi_status_print;
-#else
-#define ahc_scb_scsi_status_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCB_SCSI_STATUS", 0xa8, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scb_target_phases_print;
-#else
-#define ahc_scb_target_phases_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCB_TARGET_PHASES", 0xa9, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scb_target_data_dir_print;
-#else
-#define ahc_scb_target_data_dir_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCB_TARGET_DATA_DIR", 0xaa, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scb_target_itag_print;
-#else
-#define ahc_scb_target_itag_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCB_TARGET_ITAG", 0xab, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scb_dataptr_print;
-#else
-#define ahc_scb_dataptr_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCB_DATAPTR", 0xac, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scb_datacnt_print;
-#else
-#define ahc_scb_datacnt_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCB_DATACNT", 0xb0, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scb_sgptr_print;
-#else
-#define ahc_scb_sgptr_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCB_SGPTR", 0xb4, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
 ahc_reg_print_t ahc_scb_control_print;
 #else
 #define ahc_scb_control_print(regvalue, cur_col, wrap) \
@@ -880,188 +187,6 @@
     ahc_print_register(NULL, 0, "SCB_TAG", 0xbb, regvalue, cur_col, wrap)
 #endif
 
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scb_cdb_len_print;
-#else
-#define ahc_scb_cdb_len_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCB_CDB_LEN", 0xbc, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scb_scsirate_print;
-#else
-#define ahc_scb_scsirate_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCB_SCSIRATE", 0xbd, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scb_scsioffset_print;
-#else
-#define ahc_scb_scsioffset_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCB_SCSIOFFSET", 0xbe, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scb_next_print;
-#else
-#define ahc_scb_next_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCB_NEXT", 0xbf, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scb_64_spare_print;
-#else
-#define ahc_scb_64_spare_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCB_64_SPARE", 0xc0, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_seectl_2840_print;
-#else
-#define ahc_seectl_2840_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SEECTL_2840", 0xc0, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_status_2840_print;
-#else
-#define ahc_status_2840_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "STATUS_2840", 0xc1, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scb_64_btt_print;
-#else
-#define ahc_scb_64_btt_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCB_64_BTT", 0xd0, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_cchaddr_print;
-#else
-#define ahc_cchaddr_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "CCHADDR", 0xe0, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_cchcnt_print;
-#else
-#define ahc_cchcnt_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "CCHCNT", 0xe8, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_ccsgram_print;
-#else
-#define ahc_ccsgram_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "CCSGRAM", 0xe9, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_ccsgaddr_print;
-#else
-#define ahc_ccsgaddr_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "CCSGADDR", 0xea, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_ccsgctl_print;
-#else
-#define ahc_ccsgctl_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "CCSGCTL", 0xeb, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_ccscbram_print;
-#else
-#define ahc_ccscbram_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "CCSCBRAM", 0xec, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_ccscbaddr_print;
-#else
-#define ahc_ccscbaddr_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "CCSCBADDR", 0xed, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_ccscbctl_print;
-#else
-#define ahc_ccscbctl_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "CCSCBCTL", 0xee, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_ccscbcnt_print;
-#else
-#define ahc_ccscbcnt_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "CCSCBCNT", 0xef, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_scbbaddr_print;
-#else
-#define ahc_scbbaddr_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SCBBADDR", 0xf0, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_ccscbptr_print;
-#else
-#define ahc_ccscbptr_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "CCSCBPTR", 0xf1, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_hnscb_qoff_print;
-#else
-#define ahc_hnscb_qoff_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "HNSCB_QOFF", 0xf4, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_snscb_qoff_print;
-#else
-#define ahc_snscb_qoff_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SNSCB_QOFF", 0xf6, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_sdscb_qoff_print;
-#else
-#define ahc_sdscb_qoff_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SDSCB_QOFF", 0xf8, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_qoff_ctlsta_print;
-#else
-#define ahc_qoff_ctlsta_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "QOFF_CTLSTA", 0xfa, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_dff_thrsh_print;
-#else
-#define ahc_dff_thrsh_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "DFF_THRSH", 0xfb, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_sg_cache_shadow_print;
-#else
-#define ahc_sg_cache_shadow_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SG_CACHE_SHADOW", 0xfc, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahc_reg_print_t ahc_sg_cache_pre_print;
-#else
-#define ahc_sg_cache_pre_print(regvalue, cur_col, wrap) \
-    ahc_print_register(NULL, 0, "SG_CACHE_PRE", 0xfc, regvalue, cur_col, wrap)
-#endif
-
 
 #define	SCSISEQ         		0x00
 #define		TEMODE          	0x80
diff --git a/drivers/scsi/aic7xxx/aic7xxx_reg_print.c_shipped b/drivers/scsi/aic7xxx/aic7xxx_reg_print.c_shipped
index 309a562..9f9b880 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_reg_print.c_shipped
+++ b/drivers/scsi/aic7xxx/aic7xxx_reg_print.c_shipped
@@ -43,48 +43,6 @@
 	    0x01, regvalue, cur_col, wrap));
 }
 
-static const ahc_reg_parse_entry_t SXFRCTL1_parse_table[] = {
-	{ "STPWEN",		0x01, 0x01 },
-	{ "ACTNEGEN",		0x02, 0x02 },
-	{ "ENSTIMER",		0x04, 0x04 },
-	{ "ENSPCHK",		0x20, 0x20 },
-	{ "SWRAPEN",		0x40, 0x40 },
-	{ "BITBUCKET",		0x80, 0x80 },
-	{ "STIMESEL",		0x18, 0x18 }
-};
-
-int
-ahc_sxfrctl1_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SXFRCTL1_parse_table, 7, "SXFRCTL1",
-	    0x02, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t SCSISIGO_parse_table[] = {
-	{ "ACKO",		0x01, 0x01 },
-	{ "REQO",		0x02, 0x02 },
-	{ "BSYO",		0x04, 0x04 },
-	{ "SELO",		0x08, 0x08 },
-	{ "ATNO",		0x10, 0x10 },
-	{ "MSGO",		0x20, 0x20 },
-	{ "IOO",		0x40, 0x40 },
-	{ "CDO",		0x80, 0x80 },
-	{ "P_DATAOUT",		0x00, 0x00 },
-	{ "P_DATAIN",		0x40, 0x40 },
-	{ "P_COMMAND",		0x80, 0x80 },
-	{ "P_MESGOUT",		0xa0, 0xa0 },
-	{ "P_STATUS",		0xc0, 0xc0 },
-	{ "PHASE_MASK",		0xe0, 0xe0 },
-	{ "P_MESGIN",		0xe0, 0xe0 }
-};
-
-int
-ahc_scsisigo_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SCSISIGO_parse_table, 15, "SCSISIGO",
-	    0x03, regvalue, cur_col, wrap));
-}
-
 static const ahc_reg_parse_entry_t SCSISIGI_parse_table[] = {
 	{ "ACKI",		0x01, 0x01 },
 	{ "REQI",		0x02, 0x02 },
@@ -128,77 +86,6 @@
 	    0x04, regvalue, cur_col, wrap));
 }
 
-static const ahc_reg_parse_entry_t SCSIID_parse_table[] = {
-	{ "TWIN_CHNLB",		0x80, 0x80 },
-	{ "OID",		0x0f, 0x0f },
-	{ "TWIN_TID",		0x70, 0x70 },
-	{ "SOFS_ULTRA2",	0x7f, 0x7f },
-	{ "TID",		0xf0, 0xf0 }
-};
-
-int
-ahc_scsiid_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SCSIID_parse_table, 5, "SCSIID",
-	    0x05, regvalue, cur_col, wrap));
-}
-
-int
-ahc_scsidatl_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SCSIDATL",
-	    0x06, regvalue, cur_col, wrap));
-}
-
-int
-ahc_stcnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "STCNT",
-	    0x08, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t OPTIONMODE_parse_table[] = {
-	{ "DIS_MSGIN_DUALEDGE",	0x01, 0x01 },
-	{ "AUTO_MSGOUT_DE",	0x02, 0x02 },
-	{ "SCSIDATL_IMGEN",	0x04, 0x04 },
-	{ "EXPPHASEDIS",	0x08, 0x08 },
-	{ "BUSFREEREV",		0x10, 0x10 },
-	{ "ATNMGMNTEN",		0x20, 0x20 },
-	{ "AUTOACKEN",		0x40, 0x40 },
-	{ "AUTORATEEN",		0x80, 0x80 },
-	{ "OPTIONMODE_DEFAULTS",0x03, 0x03 }
-};
-
-int
-ahc_optionmode_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(OPTIONMODE_parse_table, 9, "OPTIONMODE",
-	    0x08, regvalue, cur_col, wrap));
-}
-
-int
-ahc_targcrccnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "TARGCRCCNT",
-	    0x0a, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t CLRSINT0_parse_table[] = {
-	{ "CLRSPIORDY",		0x02, 0x02 },
-	{ "CLRSWRAP",		0x08, 0x08 },
-	{ "CLRIOERR",		0x08, 0x08 },
-	{ "CLRSELINGO",		0x10, 0x10 },
-	{ "CLRSELDI",		0x20, 0x20 },
-	{ "CLRSELDO",		0x40, 0x40 }
-};
-
-int
-ahc_clrsint0_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(CLRSINT0_parse_table, 6, "CLRSINT0",
-	    0x0b, regvalue, cur_col, wrap));
-}
-
 static const ahc_reg_parse_entry_t SSTAT0_parse_table[] = {
 	{ "DMADONE",		0x01, 0x01 },
 	{ "SPIORDY",		0x02, 0x02 },
@@ -218,23 +105,6 @@
 	    0x0b, regvalue, cur_col, wrap));
 }
 
-static const ahc_reg_parse_entry_t CLRSINT1_parse_table[] = {
-	{ "CLRREQINIT",		0x01, 0x01 },
-	{ "CLRPHASECHG",	0x02, 0x02 },
-	{ "CLRSCSIPERR",	0x04, 0x04 },
-	{ "CLRBUSFREE",		0x08, 0x08 },
-	{ "CLRSCSIRSTI",	0x20, 0x20 },
-	{ "CLRATNO",		0x40, 0x40 },
-	{ "CLRSELTIMEO",	0x80, 0x80 }
-};
-
-int
-ahc_clrsint1_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(CLRSINT1_parse_table, 7, "CLRSINT1",
-	    0x0c, regvalue, cur_col, wrap));
-}
-
 static const ahc_reg_parse_entry_t SSTAT1_parse_table[] = {
 	{ "REQINIT",		0x01, 0x01 },
 	{ "PHASECHG",		0x02, 0x02 },
@@ -284,18 +154,6 @@
 	    0x0e, regvalue, cur_col, wrap));
 }
 
-static const ahc_reg_parse_entry_t SCSIID_ULTRA2_parse_table[] = {
-	{ "OID",		0x0f, 0x0f },
-	{ "TID",		0xf0, 0xf0 }
-};
-
-int
-ahc_scsiid_ultra2_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SCSIID_ULTRA2_parse_table, 2, "SCSIID_ULTRA2",
-	    0x0f, regvalue, cur_col, wrap));
-}
-
 static const ahc_reg_parse_entry_t SIMODE0_parse_table[] = {
 	{ "ENDMADONE",		0x01, 0x01 },
 	{ "ENSPIORDY",		0x02, 0x02 },
@@ -339,107 +197,6 @@
 	    0x12, regvalue, cur_col, wrap));
 }
 
-int
-ahc_shaddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SHADDR",
-	    0x14, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t SELTIMER_parse_table[] = {
-	{ "STAGE1",		0x01, 0x01 },
-	{ "STAGE2",		0x02, 0x02 },
-	{ "STAGE3",		0x04, 0x04 },
-	{ "STAGE4",		0x08, 0x08 },
-	{ "STAGE5",		0x10, 0x10 },
-	{ "STAGE6",		0x20, 0x20 }
-};
-
-int
-ahc_seltimer_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SELTIMER_parse_table, 6, "SELTIMER",
-	    0x18, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t SELID_parse_table[] = {
-	{ "ONEBIT",		0x08, 0x08 },
-	{ "SELID_MASK",		0xf0, 0xf0 }
-};
-
-int
-ahc_selid_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SELID_parse_table, 2, "SELID",
-	    0x19, regvalue, cur_col, wrap));
-}
-
-int
-ahc_targid_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "TARGID",
-	    0x1b, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t SPIOCAP_parse_table[] = {
-	{ "SSPIOCPS",		0x01, 0x01 },
-	{ "ROM",		0x02, 0x02 },
-	{ "EEPROM",		0x04, 0x04 },
-	{ "SEEPROM",		0x08, 0x08 },
-	{ "EXT_BRDCTL",		0x10, 0x10 },
-	{ "SOFTCMDEN",		0x20, 0x20 },
-	{ "SOFT0",		0x40, 0x40 },
-	{ "SOFT1",		0x80, 0x80 }
-};
-
-int
-ahc_spiocap_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SPIOCAP_parse_table, 8, "SPIOCAP",
-	    0x1b, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t BRDCTL_parse_table[] = {
-	{ "BRDCTL0",		0x01, 0x01 },
-	{ "BRDSTB_ULTRA2",	0x01, 0x01 },
-	{ "BRDCTL1",		0x02, 0x02 },
-	{ "BRDRW_ULTRA2",	0x02, 0x02 },
-	{ "BRDRW",		0x04, 0x04 },
-	{ "BRDDAT2",		0x04, 0x04 },
-	{ "BRDCS",		0x08, 0x08 },
-	{ "BRDDAT3",		0x08, 0x08 },
-	{ "BRDSTB",		0x10, 0x10 },
-	{ "BRDDAT4",		0x10, 0x10 },
-	{ "BRDDAT5",		0x20, 0x20 },
-	{ "BRDDAT6",		0x40, 0x40 },
-	{ "BRDDAT7",		0x80, 0x80 }
-};
-
-int
-ahc_brdctl_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(BRDCTL_parse_table, 13, "BRDCTL",
-	    0x1d, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t SEECTL_parse_table[] = {
-	{ "SEEDI",		0x01, 0x01 },
-	{ "SEEDO",		0x02, 0x02 },
-	{ "SEECK",		0x04, 0x04 },
-	{ "SEECS",		0x08, 0x08 },
-	{ "SEERDY",		0x10, 0x10 },
-	{ "SEEMS",		0x20, 0x20 },
-	{ "EXTARBREQ",		0x40, 0x40 },
-	{ "EXTARBACK",		0x80, 0x80 }
-};
-
-int
-ahc_seectl_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SEECTL_parse_table, 8, "SEECTL",
-	    0x1e, regvalue, cur_col, wrap));
-}
-
 static const ahc_reg_parse_entry_t SBLKCTL_parse_table[] = {
 	{ "XCVR",		0x01, 0x01 },
 	{ "SELWIDE",		0x02, 0x02 },
@@ -458,68 +215,6 @@
 	    0x1f, regvalue, cur_col, wrap));
 }
 
-int
-ahc_busy_targets_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "BUSY_TARGETS",
-	    0x20, regvalue, cur_col, wrap));
-}
-
-int
-ahc_ultra_enb_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "ULTRA_ENB",
-	    0x30, regvalue, cur_col, wrap));
-}
-
-int
-ahc_disc_dsb_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "DISC_DSB",
-	    0x32, regvalue, cur_col, wrap));
-}
-
-int
-ahc_mwi_residual_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "MWI_RESIDUAL",
-	    0x38, regvalue, cur_col, wrap));
-}
-
-int
-ahc_next_queued_scb_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "NEXT_QUEUED_SCB",
-	    0x39, regvalue, cur_col, wrap));
-}
-
-int
-ahc_msg_out_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "MSG_OUT",
-	    0x3a, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t DMAPARAMS_parse_table[] = {
-	{ "FIFORESET",		0x01, 0x01 },
-	{ "FIFOFLUSH",		0x02, 0x02 },
-	{ "DIRECTION",		0x04, 0x04 },
-	{ "HDMAEN",		0x08, 0x08 },
-	{ "HDMAENACK",		0x08, 0x08 },
-	{ "SDMAEN",		0x10, 0x10 },
-	{ "SDMAENACK",		0x10, 0x10 },
-	{ "SCSIEN",		0x20, 0x20 },
-	{ "WIDEODD",		0x40, 0x40 },
-	{ "PRELOADEN",		0x80, 0x80 }
-};
-
-int
-ahc_dmaparams_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(DMAPARAMS_parse_table, 10, "DMAPARAMS",
-	    0x3b, regvalue, cur_col, wrap));
-}
-
 static const ahc_reg_parse_entry_t SEQ_FLAGS_parse_table[] = {
 	{ "NO_DISCONNECT",	0x01, 0x01 },
 	{ "SPHASE_PENDING",	0x02, 0x02 },
@@ -539,20 +234,6 @@
 	    0x3c, regvalue, cur_col, wrap));
 }
 
-int
-ahc_saved_scsiid_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SAVED_SCSIID",
-	    0x3d, regvalue, cur_col, wrap));
-}
-
-int
-ahc_saved_lun_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SAVED_LUN",
-	    0x3e, regvalue, cur_col, wrap));
-}
-
 static const ahc_reg_parse_entry_t LASTPHASE_parse_table[] = {
 	{ "MSGI",		0x20, 0x20 },
 	{ "IOI",		0x40, 0x40 },
@@ -574,193 +255,6 @@
 	    0x3f, regvalue, cur_col, wrap));
 }
 
-int
-ahc_waiting_scbh_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "WAITING_SCBH",
-	    0x40, regvalue, cur_col, wrap));
-}
-
-int
-ahc_disconnected_scbh_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "DISCONNECTED_SCBH",
-	    0x41, regvalue, cur_col, wrap));
-}
-
-int
-ahc_free_scbh_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "FREE_SCBH",
-	    0x42, regvalue, cur_col, wrap));
-}
-
-int
-ahc_hscb_addr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "HSCB_ADDR",
-	    0x44, regvalue, cur_col, wrap));
-}
-
-int
-ahc_shared_data_addr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SHARED_DATA_ADDR",
-	    0x48, regvalue, cur_col, wrap));
-}
-
-int
-ahc_kernel_qinpos_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "KERNEL_QINPOS",
-	    0x4c, regvalue, cur_col, wrap));
-}
-
-int
-ahc_qinpos_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "QINPOS",
-	    0x4d, regvalue, cur_col, wrap));
-}
-
-int
-ahc_qoutpos_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "QOUTPOS",
-	    0x4e, regvalue, cur_col, wrap));
-}
-
-int
-ahc_kernel_tqinpos_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "KERNEL_TQINPOS",
-	    0x4f, regvalue, cur_col, wrap));
-}
-
-int
-ahc_tqinpos_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "TQINPOS",
-	    0x50, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t ARG_1_parse_table[] = {
-	{ "CONT_TARG_SESSION",	0x02, 0x02 },
-	{ "CONT_MSG_LOOP",	0x04, 0x04 },
-	{ "EXIT_MSG_LOOP",	0x08, 0x08 },
-	{ "MSGOUT_PHASEMIS",	0x10, 0x10 },
-	{ "SEND_REJ",		0x20, 0x20 },
-	{ "SEND_SENSE",		0x40, 0x40 },
-	{ "SEND_MSG",		0x80, 0x80 }
-};
-
-int
-ahc_arg_1_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(ARG_1_parse_table, 7, "ARG_1",
-	    0x51, regvalue, cur_col, wrap));
-}
-
-int
-ahc_arg_2_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "ARG_2",
-	    0x52, regvalue, cur_col, wrap));
-}
-
-int
-ahc_last_msg_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "LAST_MSG",
-	    0x53, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t SCSISEQ_TEMPLATE_parse_table[] = {
-	{ "ENAUTOATNP",		0x02, 0x02 },
-	{ "ENAUTOATNI",		0x04, 0x04 },
-	{ "ENAUTOATNO",		0x08, 0x08 },
-	{ "ENRSELI",		0x10, 0x10 },
-	{ "ENSELI",		0x20, 0x20 },
-	{ "ENSELO",		0x40, 0x40 }
-};
-
-int
-ahc_scsiseq_template_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SCSISEQ_TEMPLATE_parse_table, 6, "SCSISEQ_TEMPLATE",
-	    0x54, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t HA_274_BIOSGLOBAL_parse_table[] = {
-	{ "HA_274_EXTENDED_TRANS",0x01, 0x01 }
-};
-
-int
-ahc_ha_274_biosglobal_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(HA_274_BIOSGLOBAL_parse_table, 1, "HA_274_BIOSGLOBAL",
-	    0x56, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t SEQ_FLAGS2_parse_table[] = {
-	{ "SCB_DMA",		0x01, 0x01 },
-	{ "TARGET_MSG_PENDING",	0x02, 0x02 }
-};
-
-int
-ahc_seq_flags2_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SEQ_FLAGS2_parse_table, 2, "SEQ_FLAGS2",
-	    0x57, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t SCSICONF_parse_table[] = {
-	{ "ENSPCHK",		0x20, 0x20 },
-	{ "RESET_SCSI",		0x40, 0x40 },
-	{ "TERM_ENB",		0x80, 0x80 },
-	{ "HSCSIID",		0x07, 0x07 },
-	{ "HWSCSIID",		0x0f, 0x0f }
-};
-
-int
-ahc_scsiconf_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SCSICONF_parse_table, 5, "SCSICONF",
-	    0x5a, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t INTDEF_parse_table[] = {
-	{ "EDGE_TRIG",		0x80, 0x80 },
-	{ "VECTOR",		0x0f, 0x0f }
-};
-
-int
-ahc_intdef_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(INTDEF_parse_table, 2, "INTDEF",
-	    0x5c, regvalue, cur_col, wrap));
-}
-
-int
-ahc_hostconf_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "HOSTCONF",
-	    0x5d, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t HA_274_BIOSCTRL_parse_table[] = {
-	{ "CHANNEL_B_PRIMARY",	0x08, 0x08 },
-	{ "BIOSMODE",		0x30, 0x30 },
-	{ "BIOSDISABLED",	0x30, 0x30 }
-};
-
-int
-ahc_ha_274_biosctrl_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(HA_274_BIOSCTRL_parse_table, 3, "HA_274_BIOSCTRL",
-	    0x5f, regvalue, cur_col, wrap));
-}
-
 static const ahc_reg_parse_entry_t SEQCTL_parse_table[] = {
 	{ "LOADRAM",		0x01, 0x01 },
 	{ "SEQRESET",		0x02, 0x02 },
@@ -780,285 +274,12 @@
 }
 
 int
-ahc_seqram_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SEQRAM",
-	    0x61, regvalue, cur_col, wrap));
-}
-
-int
-ahc_seqaddr0_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SEQADDR0",
-	    0x62, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t SEQADDR1_parse_table[] = {
-	{ "SEQADDR1_MASK",	0x01, 0x01 }
-};
-
-int
-ahc_seqaddr1_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SEQADDR1_parse_table, 1, "SEQADDR1",
-	    0x63, regvalue, cur_col, wrap));
-}
-
-int
-ahc_accum_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "ACCUM",
-	    0x64, regvalue, cur_col, wrap));
-}
-
-int
-ahc_sindex_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SINDEX",
-	    0x65, regvalue, cur_col, wrap));
-}
-
-int
-ahc_dindex_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "DINDEX",
-	    0x66, regvalue, cur_col, wrap));
-}
-
-int
-ahc_allones_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "ALLONES",
-	    0x69, regvalue, cur_col, wrap));
-}
-
-int
-ahc_allzeros_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "ALLZEROS",
-	    0x6a, regvalue, cur_col, wrap));
-}
-
-int
-ahc_none_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "NONE",
-	    0x6a, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t FLAGS_parse_table[] = {
-	{ "CARRY",		0x01, 0x01 },
-	{ "ZERO",		0x02, 0x02 }
-};
-
-int
-ahc_flags_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(FLAGS_parse_table, 2, "FLAGS",
-	    0x6b, regvalue, cur_col, wrap));
-}
-
-int
-ahc_sindir_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SINDIR",
-	    0x6c, regvalue, cur_col, wrap));
-}
-
-int
-ahc_dindir_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "DINDIR",
-	    0x6d, regvalue, cur_col, wrap));
-}
-
-int
-ahc_stack_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "STACK",
-	    0x6f, regvalue, cur_col, wrap));
-}
-
-int
-ahc_targ_offset_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "TARG_OFFSET",
-	    0x70, regvalue, cur_col, wrap));
-}
-
-int
 ahc_sram_base_print(u_int regvalue, u_int *cur_col, u_int wrap)
 {
 	return (ahc_print_register(NULL, 0, "SRAM_BASE",
 	    0x70, regvalue, cur_col, wrap));
 }
 
-static const ahc_reg_parse_entry_t DSCOMMAND0_parse_table[] = {
-	{ "CIOPARCKEN",		0x01, 0x01 },
-	{ "USCBSIZE32",		0x02, 0x02 },
-	{ "RAMPS",		0x04, 0x04 },
-	{ "INTSCBRAMSEL",	0x08, 0x08 },
-	{ "EXTREQLCK",		0x10, 0x10 },
-	{ "MPARCKEN",		0x20, 0x20 },
-	{ "DPARCKEN",		0x40, 0x40 },
-	{ "CACHETHEN",		0x80, 0x80 }
-};
-
-int
-ahc_dscommand0_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(DSCOMMAND0_parse_table, 8, "DSCOMMAND0",
-	    0x84, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t BUSTIME_parse_table[] = {
-	{ "BON",		0x0f, 0x0f },
-	{ "BOFF",		0xf0, 0xf0 }
-};
-
-int
-ahc_bustime_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(BUSTIME_parse_table, 2, "BUSTIME",
-	    0x85, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t DSCOMMAND1_parse_table[] = {
-	{ "HADDLDSEL0",		0x01, 0x01 },
-	{ "HADDLDSEL1",		0x02, 0x02 },
-	{ "DSLATT",		0xfc, 0xfc }
-};
-
-int
-ahc_dscommand1_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(DSCOMMAND1_parse_table, 3, "DSCOMMAND1",
-	    0x85, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t BUSSPD_parse_table[] = {
-	{ "STBON",		0x07, 0x07 },
-	{ "STBOFF",		0x38, 0x38 },
-	{ "DFTHRSH_75",		0x80, 0x80 },
-	{ "DFTHRSH",		0xc0, 0xc0 },
-	{ "DFTHRSH_100",	0xc0, 0xc0 }
-};
-
-int
-ahc_busspd_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(BUSSPD_parse_table, 5, "BUSSPD",
-	    0x86, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t HS_MAILBOX_parse_table[] = {
-	{ "SEQ_MAILBOX",	0x0f, 0x0f },
-	{ "HOST_TQINPOS",	0x80, 0x80 },
-	{ "HOST_MAILBOX",	0xf0, 0xf0 }
-};
-
-int
-ahc_hs_mailbox_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(HS_MAILBOX_parse_table, 3, "HS_MAILBOX",
-	    0x86, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t DSPCISTATUS_parse_table[] = {
-	{ "DFTHRSH_100",	0xc0, 0xc0 }
-};
-
-int
-ahc_dspcistatus_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(DSPCISTATUS_parse_table, 1, "DSPCISTATUS",
-	    0x86, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t HCNTRL_parse_table[] = {
-	{ "CHIPRST",		0x01, 0x01 },
-	{ "CHIPRSTACK",		0x01, 0x01 },
-	{ "INTEN",		0x02, 0x02 },
-	{ "PAUSE",		0x04, 0x04 },
-	{ "IRQMS",		0x08, 0x08 },
-	{ "SWINT",		0x10, 0x10 },
-	{ "POWRDN",		0x40, 0x40 }
-};
-
-int
-ahc_hcntrl_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(HCNTRL_parse_table, 7, "HCNTRL",
-	    0x87, regvalue, cur_col, wrap));
-}
-
-int
-ahc_haddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "HADDR",
-	    0x88, regvalue, cur_col, wrap));
-}
-
-int
-ahc_hcnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "HCNT",
-	    0x8c, regvalue, cur_col, wrap));
-}
-
-int
-ahc_scbptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SCBPTR",
-	    0x90, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t INTSTAT_parse_table[] = {
-	{ "SEQINT",		0x01, 0x01 },
-	{ "CMDCMPLT",		0x02, 0x02 },
-	{ "SCSIINT",		0x04, 0x04 },
-	{ "BRKADRINT",		0x08, 0x08 },
-	{ "BAD_PHASE",		0x01, 0x01 },
-	{ "INT_PEND",		0x0f, 0x0f },
-	{ "SEND_REJECT",	0x11, 0x11 },
-	{ "PROTO_VIOLATION",	0x21, 0x21 },
-	{ "NO_MATCH",		0x31, 0x31 },
-	{ "IGN_WIDE_RES",	0x41, 0x41 },
-	{ "PDATA_REINIT",	0x51, 0x51 },
-	{ "HOST_MSG_LOOP",	0x61, 0x61 },
-	{ "BAD_STATUS",		0x71, 0x71 },
-	{ "PERR_DETECTED",	0x81, 0x81 },
-	{ "DATA_OVERRUN",	0x91, 0x91 },
-	{ "MKMSG_FAILED",	0xa1, 0xa1 },
-	{ "MISSED_BUSFREE",	0xb1, 0xb1 },
-	{ "SCB_MISMATCH",	0xc1, 0xc1 },
-	{ "NO_FREE_SCB",	0xd1, 0xd1 },
-	{ "OUT_OF_RANGE",	0xe1, 0xe1 },
-	{ "SEQINT_MASK",	0xf1, 0xf1 }
-};
-
-int
-ahc_intstat_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(INTSTAT_parse_table, 21, "INTSTAT",
-	    0x91, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t CLRINT_parse_table[] = {
-	{ "CLRSEQINT",		0x01, 0x01 },
-	{ "CLRCMDINT",		0x02, 0x02 },
-	{ "CLRSCSIINT",		0x04, 0x04 },
-	{ "CLRBRKADRINT",	0x08, 0x08 },
-	{ "CLRPARERR",		0x10, 0x10 }
-};
-
-int
-ahc_clrint_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(CLRINT_parse_table, 5, "CLRINT",
-	    0x92, regvalue, cur_col, wrap));
-}
-
 static const ahc_reg_parse_entry_t ERROR_parse_table[] = {
 	{ "ILLHADDR",		0x01, 0x01 },
 	{ "ILLSADDR",		0x02, 0x02 },
@@ -1115,62 +336,6 @@
 	    0x94, regvalue, cur_col, wrap));
 }
 
-int
-ahc_dfwaddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "DFWADDR",
-	    0x95, regvalue, cur_col, wrap));
-}
-
-int
-ahc_dfdat_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "DFDAT",
-	    0x99, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t SCBCNT_parse_table[] = {
-	{ "SCBAUTO",		0x80, 0x80 },
-	{ "SCBCNT_MASK",	0x1f, 0x1f }
-};
-
-int
-ahc_scbcnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SCBCNT_parse_table, 2, "SCBCNT",
-	    0x9a, regvalue, cur_col, wrap));
-}
-
-int
-ahc_qinfifo_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "QINFIFO",
-	    0x9b, regvalue, cur_col, wrap));
-}
-
-int
-ahc_qoutfifo_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "QOUTFIFO",
-	    0x9d, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t CRCCONTROL1_parse_table[] = {
-	{ "TARGCRCCNTEN",	0x04, 0x04 },
-	{ "TARGCRCENDEN",	0x08, 0x08 },
-	{ "CRCREQCHKEN",	0x10, 0x10 },
-	{ "CRCENDCHKEN",	0x20, 0x20 },
-	{ "CRCVALCHKEN",	0x40, 0x40 },
-	{ "CRCONSEEN",		0x80, 0x80 }
-};
-
-int
-ahc_crccontrol1_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(CRCCONTROL1_parse_table, 6, "CRCCONTROL1",
-	    0x9d, regvalue, cur_col, wrap));
-}
-
 static const ahc_reg_parse_entry_t SCSIPHASE_parse_table[] = {
 	{ "DATA_OUT_PHASE",	0x01, 0x01 },
 	{ "DATA_IN_PHASE",	0x02, 0x02 },
@@ -1188,17 +353,6 @@
 	    0x9e, regvalue, cur_col, wrap));
 }
 
-static const ahc_reg_parse_entry_t SFUNCT_parse_table[] = {
-	{ "ALT_MODE",		0x80, 0x80 }
-};
-
-int
-ahc_sfunct_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SFUNCT_parse_table, 1, "SFUNCT",
-	    0x9f, regvalue, cur_col, wrap));
-}
-
 int
 ahc_scb_base_print(u_int regvalue, u_int *cur_col, u_int wrap)
 {
@@ -1206,80 +360,6 @@
 	    0xa0, regvalue, cur_col, wrap));
 }
 
-int
-ahc_scb_cdb_ptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SCB_CDB_PTR",
-	    0xa0, regvalue, cur_col, wrap));
-}
-
-int
-ahc_scb_residual_sgptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SCB_RESIDUAL_SGPTR",
-	    0xa4, regvalue, cur_col, wrap));
-}
-
-int
-ahc_scb_scsi_status_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SCB_SCSI_STATUS",
-	    0xa8, regvalue, cur_col, wrap));
-}
-
-int
-ahc_scb_target_phases_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SCB_TARGET_PHASES",
-	    0xa9, regvalue, cur_col, wrap));
-}
-
-int
-ahc_scb_target_data_dir_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SCB_TARGET_DATA_DIR",
-	    0xaa, regvalue, cur_col, wrap));
-}
-
-int
-ahc_scb_target_itag_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SCB_TARGET_ITAG",
-	    0xab, regvalue, cur_col, wrap));
-}
-
-int
-ahc_scb_dataptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SCB_DATAPTR",
-	    0xac, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t SCB_DATACNT_parse_table[] = {
-	{ "SG_LAST_SEG",	0x80, 0x80 },
-	{ "SG_HIGH_ADDR_BITS",	0x7f, 0x7f }
-};
-
-int
-ahc_scb_datacnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SCB_DATACNT_parse_table, 2, "SCB_DATACNT",
-	    0xb0, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t SCB_SGPTR_parse_table[] = {
-	{ "SG_LIST_NULL",	0x01, 0x01 },
-	{ "SG_FULL_RESID",	0x02, 0x02 },
-	{ "SG_RESID_VALID",	0x04, 0x04 }
-};
-
-int
-ahc_scb_sgptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SCB_SGPTR_parse_table, 3, "SCB_SGPTR",
-	    0xb4, regvalue, cur_col, wrap));
-}
-
 static const ahc_reg_parse_entry_t SCB_CONTROL_parse_table[] = {
 	{ "DISCONNECTED",	0x04, 0x04 },
 	{ "ULTRAENB",		0x08, 0x08 },
@@ -1331,248 +411,3 @@
 	    0xbb, regvalue, cur_col, wrap));
 }
 
-int
-ahc_scb_cdb_len_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SCB_CDB_LEN",
-	    0xbc, regvalue, cur_col, wrap));
-}
-
-int
-ahc_scb_scsirate_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SCB_SCSIRATE",
-	    0xbd, regvalue, cur_col, wrap));
-}
-
-int
-ahc_scb_scsioffset_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SCB_SCSIOFFSET",
-	    0xbe, regvalue, cur_col, wrap));
-}
-
-int
-ahc_scb_next_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SCB_NEXT",
-	    0xbf, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t SEECTL_2840_parse_table[] = {
-	{ "DO_2840",		0x01, 0x01 },
-	{ "CK_2840",		0x02, 0x02 },
-	{ "CS_2840",		0x04, 0x04 }
-};
-
-int
-ahc_seectl_2840_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SEECTL_2840_parse_table, 3, "SEECTL_2840",
-	    0xc0, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t STATUS_2840_parse_table[] = {
-	{ "DI_2840",		0x01, 0x01 },
-	{ "EEPROM_TF",		0x80, 0x80 },
-	{ "ADSEL",		0x1e, 0x1e },
-	{ "BIOS_SEL",		0x60, 0x60 }
-};
-
-int
-ahc_status_2840_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(STATUS_2840_parse_table, 4, "STATUS_2840",
-	    0xc1, regvalue, cur_col, wrap));
-}
-
-int
-ahc_scb_64_btt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SCB_64_BTT",
-	    0xd0, regvalue, cur_col, wrap));
-}
-
-int
-ahc_cchaddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "CCHADDR",
-	    0xe0, regvalue, cur_col, wrap));
-}
-
-int
-ahc_cchcnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "CCHCNT",
-	    0xe8, regvalue, cur_col, wrap));
-}
-
-int
-ahc_ccsgram_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "CCSGRAM",
-	    0xe9, regvalue, cur_col, wrap));
-}
-
-int
-ahc_ccsgaddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "CCSGADDR",
-	    0xea, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t CCSGCTL_parse_table[] = {
-	{ "CCSGRESET",		0x01, 0x01 },
-	{ "SG_FETCH_NEEDED",	0x02, 0x02 },
-	{ "CCSGEN",		0x08, 0x08 },
-	{ "CCSGDONE",		0x80, 0x80 }
-};
-
-int
-ahc_ccsgctl_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(CCSGCTL_parse_table, 4, "CCSGCTL",
-	    0xeb, regvalue, cur_col, wrap));
-}
-
-int
-ahc_ccscbram_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "CCSCBRAM",
-	    0xec, regvalue, cur_col, wrap));
-}
-
-int
-ahc_ccscbaddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "CCSCBADDR",
-	    0xed, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t CCSCBCTL_parse_table[] = {
-	{ "CCSCBRESET",		0x01, 0x01 },
-	{ "CCSCBDIR",		0x04, 0x04 },
-	{ "CCSCBEN",		0x08, 0x08 },
-	{ "CCARREN",		0x10, 0x10 },
-	{ "ARRDONE",		0x40, 0x40 },
-	{ "CCSCBDONE",		0x80, 0x80 }
-};
-
-int
-ahc_ccscbctl_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(CCSCBCTL_parse_table, 6, "CCSCBCTL",
-	    0xee, regvalue, cur_col, wrap));
-}
-
-int
-ahc_ccscbcnt_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "CCSCBCNT",
-	    0xef, regvalue, cur_col, wrap));
-}
-
-int
-ahc_scbbaddr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SCBBADDR",
-	    0xf0, regvalue, cur_col, wrap));
-}
-
-int
-ahc_ccscbptr_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "CCSCBPTR",
-	    0xf1, regvalue, cur_col, wrap));
-}
-
-int
-ahc_hnscb_qoff_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "HNSCB_QOFF",
-	    0xf4, regvalue, cur_col, wrap));
-}
-
-int
-ahc_snscb_qoff_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SNSCB_QOFF",
-	    0xf6, regvalue, cur_col, wrap));
-}
-
-int
-ahc_sdscb_qoff_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(NULL, 0, "SDSCB_QOFF",
-	    0xf8, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t QOFF_CTLSTA_parse_table[] = {
-	{ "SDSCB_ROLLOVER",	0x10, 0x10 },
-	{ "SNSCB_ROLLOVER",	0x20, 0x20 },
-	{ "SCB_AVAIL",		0x40, 0x40 },
-	{ "SCB_QSIZE_256",	0x06, 0x06 },
-	{ "SCB_QSIZE",		0x07, 0x07 }
-};
-
-int
-ahc_qoff_ctlsta_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(QOFF_CTLSTA_parse_table, 5, "QOFF_CTLSTA",
-	    0xfa, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t DFF_THRSH_parse_table[] = {
-	{ "RD_DFTHRSH_MIN",	0x00, 0x00 },
-	{ "WR_DFTHRSH_MIN",	0x00, 0x00 },
-	{ "RD_DFTHRSH_25",	0x01, 0x01 },
-	{ "RD_DFTHRSH_50",	0x02, 0x02 },
-	{ "RD_DFTHRSH_63",	0x03, 0x03 },
-	{ "RD_DFTHRSH_75",	0x04, 0x04 },
-	{ "RD_DFTHRSH_85",	0x05, 0x05 },
-	{ "RD_DFTHRSH_90",	0x06, 0x06 },
-	{ "RD_DFTHRSH",		0x07, 0x07 },
-	{ "RD_DFTHRSH_MAX",	0x07, 0x07 },
-	{ "WR_DFTHRSH_25",	0x10, 0x10 },
-	{ "WR_DFTHRSH_50",	0x20, 0x20 },
-	{ "WR_DFTHRSH_63",	0x30, 0x30 },
-	{ "WR_DFTHRSH_75",	0x40, 0x40 },
-	{ "WR_DFTHRSH_85",	0x50, 0x50 },
-	{ "WR_DFTHRSH_90",	0x60, 0x60 },
-	{ "WR_DFTHRSH",		0x70, 0x70 },
-	{ "WR_DFTHRSH_MAX",	0x70, 0x70 }
-};
-
-int
-ahc_dff_thrsh_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(DFF_THRSH_parse_table, 18, "DFF_THRSH",
-	    0xfb, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t SG_CACHE_SHADOW_parse_table[] = {
-	{ "LAST_SEG_DONE",	0x01, 0x01 },
-	{ "LAST_SEG",		0x02, 0x02 },
-	{ "SG_ADDR_MASK",	0xf8, 0xf8 }
-};
-
-int
-ahc_sg_cache_shadow_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SG_CACHE_SHADOW_parse_table, 3, "SG_CACHE_SHADOW",
-	    0xfc, regvalue, cur_col, wrap));
-}
-
-static const ahc_reg_parse_entry_t SG_CACHE_PRE_parse_table[] = {
-	{ "LAST_SEG_DONE",	0x01, 0x01 },
-	{ "LAST_SEG",		0x02, 0x02 },
-	{ "SG_ADDR_MASK",	0xf8, 0xf8 }
-};
-
-int
-ahc_sg_cache_pre_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
-	return (ahc_print_register(SG_CACHE_PRE_parse_table, 3, "SG_CACHE_PRE",
-	    0xfc, regvalue, cur_col, wrap));
-}
-
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
index 81be6a2..e406443 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
@@ -147,6 +147,8 @@
 
 %token T_ACCESS_MODE
 
+%token T_DONT_GENERATE_DEBUG_CODE
+
 %token T_MODES
 
 %token T_DEFINE
@@ -357,6 +359,7 @@
 |	size
 |	count
 |	access_mode
+|	dont_generate_debug_code
 |	modes
 |	field_defn
 |	enum_defn
@@ -410,6 +413,13 @@
 	}
 ;
 
+dont_generate_debug_code:
+	T_DONT_GENERATE_DEBUG_CODE
+	{
+		cur_symbol->dont_generate_debug_code = 1;
+	}
+;
+
 modes:
 	T_MODES mode_list
 	{
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l b/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l
index 2c7f02d..93c8667 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l
@@ -164,6 +164,7 @@
 address			{ return T_ADDRESS; }
 count			{ return T_COUNT; }
 access_mode		{ return T_ACCESS_MODE; }
+dont_generate_debug_code { return T_DONT_GENERATE_DEBUG_CODE; }
 modes			{ return T_MODES; }
 RW|RO|WO		{
 				 if (strcmp(yytext, "RW") == 0)
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c
index fcd3578..078ed60 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c
@@ -539,6 +539,9 @@
 	aic_print_include(dfile, stock_include_file);
 	SLIST_FOREACH(curnode, &registers, links) {
 
+		if (curnode->symbol->dont_generate_debug_code)
+			continue;
+
 		switch(curnode->symbol->type) {
 		case REGISTER:
 		case SCBLOC:
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h
index 05190c1..2ba73ae 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h
@@ -137,7 +137,8 @@
 		struct label_info *linfo;
 		struct cond_info  *condinfo;
 		struct macro_info *macroinfo;
-	}info;
+	} info;
+	int	dont_generate_debug_code;
 } symbol_t;
 
 typedef struct symbol_ref {
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index a43c3ed..3d50cab 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -401,6 +401,9 @@
 		}
 	}
 
+	if (h->lun_state == RDAC_LUN_UNOWNED)
+		h->state = RDAC_STATE_PASSIVE;
+
 	return err;
 }
 
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index afc96e8..2370fd8 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -452,40 +452,34 @@
 #endif
 };
 
-static int idescsi_ide_open(struct inode *inode, struct file *filp)
+static int idescsi_ide_open(struct block_device *bdev, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
-	struct ide_scsi_obj *scsi;
+	struct ide_scsi_obj *scsi = ide_scsi_get(bdev->bd_disk);
 
-	if (!(scsi = ide_scsi_get(disk)))
+	if (!scsi)
 		return -ENXIO;
 
 	return 0;
 }
 
-static int idescsi_ide_release(struct inode *inode, struct file *filp)
+static int idescsi_ide_release(struct gendisk *disk, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
-	struct ide_scsi_obj *scsi = ide_scsi_g(disk);
-
-	ide_scsi_put(scsi);
-
+	ide_scsi_put(ide_scsi_g(disk));
 	return 0;
 }
 
-static int idescsi_ide_ioctl(struct inode *inode, struct file *file,
+static int idescsi_ide_ioctl(struct block_device *bdev, fmode_t mode,
 			unsigned int cmd, unsigned long arg)
 {
-	struct block_device *bdev = inode->i_bdev;
 	struct ide_scsi_obj *scsi = ide_scsi_g(bdev->bd_disk);
-	return generic_ide_ioctl(scsi->drive, file, bdev, cmd, arg);
+	return generic_ide_ioctl(scsi->drive, bdev, cmd, arg);
 }
 
 static struct block_device_operations idescsi_ops = {
 	.owner		= THIS_MODULE,
 	.open		= idescsi_ide_open,
 	.release	= idescsi_ide_release,
-	.ioctl		= idescsi_ide_ioctl,
+	.locked_ioctl	= idescsi_ide_ioctl,
 };
 
 static int idescsi_slave_configure(struct scsi_device * sdp)
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 098739d..ded854a 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -2456,20 +2456,14 @@
 	struct Scsi_Host *shost = class_to_shost(dev);
 	struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
 	unsigned long lock_flags = 0;
-	int size = IPR_TRACE_SIZE;
-	char *src = (char *)ioa_cfg->trace;
-
-	if (off > size)
-		return 0;
-	if (off + count > size) {
-		size -= off;
-		count = size;
-	}
+	ssize_t ret;
 
 	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
-	memcpy(buf, &src[off], count);
+	ret = memory_read_from_buffer(buf, count, &off, ioa_cfg->trace,
+				IPR_TRACE_SIZE);
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
-	return count;
+
+	return ret;
 }
 
 static struct bin_attribute ipr_trace_attr = {
diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c
index 28b19ef..dc1cfb2 100644
--- a/drivers/scsi/scsi_ioctl.c
+++ b/drivers/scsi/scsi_ioctl.c
@@ -237,7 +237,7 @@
 	case SCSI_IOCTL_SEND_COMMAND:
 		if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
 			return -EACCES;
-		return sg_scsi_ioctl(NULL, sdev->request_queue, NULL, arg);
+		return sg_scsi_ioctl(sdev->request_queue, NULL, 0, arg);
 	case SCSI_IOCTL_DOORLOCK:
 		return scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
 	case SCSI_IOCTL_DOORUNLOCK:
@@ -277,14 +277,14 @@
  * @filp: either NULL or a &struct file which must have the O_NONBLOCK flag.
  */
 int scsi_nonblockable_ioctl(struct scsi_device *sdev, int cmd,
-			    void __user *arg, struct file *filp)
+			    void __user *arg, int ndelay)
 {
 	int val, result;
 
 	/* The first set of iocts may be executed even if we're doing
 	 * error processing, as long as the device was opened
 	 * non-blocking */
-	if (filp && (filp->f_flags & O_NONBLOCK)) {
+	if (ndelay) {
 		if (scsi_host_in_recovery(sdev->host))
 			return -ENODEV;
 	} else if (!scsi_block_when_processing_errors(sdev))
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index e5a9526..f5d3b96 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -529,6 +529,14 @@
 	spin_unlock_irqrestore(shost->host_lock, flags);
 }
 
+static inline int scsi_device_is_busy(struct scsi_device *sdev)
+{
+	if (sdev->device_busy >= sdev->queue_depth || sdev->device_blocked)
+		return 1;
+
+	return 0;
+}
+
 static inline int scsi_target_is_busy(struct scsi_target *starget)
 {
 	return ((starget->can_queue > 0 &&
@@ -536,6 +544,15 @@
 		 starget->target_blocked);
 }
 
+static inline int scsi_host_is_busy(struct Scsi_Host *shost)
+{
+	if ((shost->can_queue > 0 && shost->host_busy >= shost->can_queue) ||
+	    shost->host_blocked || shost->host_self_blocked)
+		return 1;
+
+	return 0;
+}
+
 /*
  * Function:	scsi_run_queue()
  *
@@ -558,11 +575,7 @@
 		scsi_single_lun_run(sdev);
 
 	spin_lock_irqsave(shost->host_lock, flags);
-	while (!list_empty(&shost->starved_list) &&
-	       !shost->host_blocked && !shost->host_self_blocked &&
-		!((shost->can_queue > 0) &&
-		  (shost->host_busy >= shost->can_queue))) {
-
+	while (!list_empty(&shost->starved_list) && !scsi_host_is_busy(shost)) {
 		int flagset;
 
 		/*
@@ -1348,8 +1361,6 @@
 static inline int scsi_dev_queue_ready(struct request_queue *q,
 				  struct scsi_device *sdev)
 {
-	if (sdev->device_busy >= sdev->queue_depth)
-		return 0;
 	if (sdev->device_busy == 0 && sdev->device_blocked) {
 		/*
 		 * unblock after device_blocked iterates to zero
@@ -1363,7 +1374,7 @@
 			return 0;
 		}
 	}
-	if (sdev->device_blocked)
+	if (scsi_device_is_busy(sdev))
 		return 0;
 
 	return 1;
@@ -1440,8 +1451,7 @@
 			return 0;
 		}
 	}
-	if ((shost->can_queue > 0 && shost->host_busy >= shost->can_queue) ||
-	    shost->host_blocked || shost->host_self_blocked) {
+	if (scsi_host_is_busy(shost)) {
 		if (list_empty(&sdev->starved_entry))
 			list_add_tail(&sdev->starved_entry, &shost->starved_list);
 		return 0;
@@ -1455,6 +1465,37 @@
 }
 
 /*
+ * Busy state exporting function for request stacking drivers.
+ *
+ * For efficiency, no lock is taken to check the busy state of
+ * shost/starget/sdev, since the returned value is not guaranteed and
+ * may be changed after request stacking drivers call the function,
+ * regardless of taking lock or not.
+ *
+ * When scsi can't dispatch I/Os anymore and needs to kill I/Os
+ * (e.g. !sdev), scsi needs to return 'not busy'.
+ * Otherwise, request stacking drivers may hold requests forever.
+ */
+static int scsi_lld_busy(struct request_queue *q)
+{
+	struct scsi_device *sdev = q->queuedata;
+	struct Scsi_Host *shost;
+	struct scsi_target *starget;
+
+	if (!sdev)
+		return 0;
+
+	shost = sdev->host;
+	starget = scsi_target(sdev);
+
+	if (scsi_host_in_recovery(shost) || scsi_host_is_busy(shost) ||
+	    scsi_target_is_busy(starget) || scsi_device_is_busy(sdev))
+		return 1;
+
+	return 0;
+}
+
+/*
  * Kill a request for a dead device
  */
 static void scsi_kill_request(struct request *req, struct request_queue *q)
@@ -1757,6 +1798,7 @@
 	blk_queue_prep_rq(q, scsi_prep_fn);
 	blk_queue_softirq_done(q, scsi_softirq_done);
 	blk_queue_rq_timed_out(q, scsi_times_out);
+	blk_queue_lld_busy(q, scsi_lld_busy);
 	return q;
 }
 
@@ -2105,22 +2147,21 @@
 	do {
 		result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr,
 					  timeout, retries);
-	} while ((driver_byte(result) & DRIVER_SENSE) &&
-		 sshdr && sshdr->sense_key == UNIT_ATTENTION &&
-		 --retries);
+		if (sdev->removable && scsi_sense_valid(sshdr) &&
+		    sshdr->sense_key == UNIT_ATTENTION)
+			sdev->changed = 1;
+	} while (scsi_sense_valid(sshdr) &&
+		 sshdr->sense_key == UNIT_ATTENTION && --retries);
 
 	if (!sshdr)
 		/* could not allocate sense buffer, so can't process it */
 		return result;
 
-	if ((driver_byte(result) & DRIVER_SENSE) && sdev->removable) {
-
-		if ((scsi_sense_valid(sshdr)) &&
-		    ((sshdr->sense_key == UNIT_ATTENTION) ||
-		     (sshdr->sense_key == NOT_READY))) {
-			sdev->changed = 1;
-			result = 0;
-		}
+	if (sdev->removable && scsi_sense_valid(sshdr) &&
+	    (sshdr->sense_key == UNIT_ATTENTION ||
+	     sshdr->sense_key == NOT_READY)) {
+		sdev->changed = 1;
+		result = 0;
 	}
 	if (!sshdr_external)
 		kfree(sshdr);
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index b37e133..723fdec 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -205,16 +205,13 @@
 };
 
 
-/**
+/*
  * GENERIC SCSI transport receive and event handlers
- **/
+ */
 
 /**
- * scsi_generic_msg_handler - receive message handler for GENERIC transport
- * 			 messages
- *
+ * scsi_generic_msg_handler - receive message handler for GENERIC transport messages
  * @skb:		socket receive buffer
- *
  **/
 static int
 scsi_generic_msg_handler(struct sk_buff *skb)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 7c4d2e6..c9e1242 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -609,17 +609,15 @@
  *	In the latter case @inode and @filp carry an abridged amount
  *	of information as noted above.
  **/
-static int sd_open(struct inode *inode, struct file *filp)
+static int sd_open(struct block_device *bdev, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
-	struct scsi_disk *sdkp;
+	struct scsi_disk *sdkp = scsi_disk_get(bdev->bd_disk);
 	struct scsi_device *sdev;
 	int retval;
 
-	if (!(sdkp = scsi_disk_get(disk)))
+	if (!sdkp)
 		return -ENXIO;
 
-
 	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
 
 	sdev = sdkp->device;
@@ -633,14 +631,13 @@
 		goto error_out;
 
 	if (sdev->removable || sdkp->write_prot)
-		check_disk_change(inode->i_bdev);
+		check_disk_change(bdev);
 
 	/*
 	 * If the drive is empty, just let the open fail.
 	 */
 	retval = -ENOMEDIUM;
-	if (sdev->removable && !sdkp->media_present &&
-	    !(filp->f_flags & O_NDELAY))
+	if (sdev->removable && !sdkp->media_present && !(mode & FMODE_NDELAY))
 		goto error_out;
 
 	/*
@@ -648,7 +645,7 @@
 	 * if the user expects to be able to write to the thing.
 	 */
 	retval = -EROFS;
-	if (sdkp->write_prot && (filp->f_mode & FMODE_WRITE))
+	if (sdkp->write_prot && (mode & FMODE_WRITE))
 		goto error_out;
 
 	/*
@@ -684,9 +681,8 @@
  *	Note: may block (uninterruptible) if error recovery is underway
  *	on this disk.
  **/
-static int sd_release(struct inode *inode, struct file *filp)
+static int sd_release(struct gendisk *disk, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
 	struct scsi_disk *sdkp = scsi_disk(disk);
 	struct scsi_device *sdev = sdkp->device;
 
@@ -743,10 +739,9 @@
  *	Note: most ioctls are forward onto the block subsystem or further
  *	down in the scsi subsystem.
  **/
-static int sd_ioctl(struct inode * inode, struct file * filp, 
+static int sd_ioctl(struct block_device *bdev, fmode_t mode,
 		    unsigned int cmd, unsigned long arg)
 {
-	struct block_device *bdev = inode->i_bdev;
 	struct gendisk *disk = bdev->bd_disk;
 	struct scsi_device *sdp = scsi_disk(disk)->device;
 	void __user *p = (void __user *)arg;
@@ -761,7 +756,8 @@
 	 * may try and take the device offline, in which case all further
 	 * access to the device is prohibited.
 	 */
-	error = scsi_nonblockable_ioctl(sdp, cmd, p, filp);
+	error = scsi_nonblockable_ioctl(sdp, cmd, p,
+					(mode & FMODE_NDELAY_NOW) != 0);
 	if (!scsi_block_when_processing_errors(sdp) || !error)
 		return error;
 
@@ -775,7 +771,7 @@
 		case SCSI_IOCTL_GET_BUS_NUMBER:
 			return scsi_ioctl(sdp, cmd, p);
 		default:
-			error = scsi_cmd_ioctl(filp, disk->queue, disk, cmd, p);
+			error = scsi_cmd_ioctl(disk->queue, disk, mode, cmd, p);
 			if (error != -ENOTTY)
 				return error;
 	}
@@ -928,11 +924,10 @@
  * This gets directly called from VFS. When the ioctl 
  * is not recognized we go back to the other translation paths. 
  */
-static long sd_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode,
+			   unsigned int cmd, unsigned long arg)
 {
-	struct block_device *bdev = file->f_path.dentry->d_inode->i_bdev;
-	struct gendisk *disk = bdev->bd_disk;
-	struct scsi_device *sdev = scsi_disk(disk)->device;
+	struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
 
 	/*
 	 * If we are in the middle of error recovery, don't let anyone
@@ -962,7 +957,7 @@
 	.owner			= THIS_MODULE,
 	.open			= sd_open,
 	.release		= sd_release,
-	.ioctl			= sd_ioctl,
+	.locked_ioctl		= sd_ioctl,
 	.getgeo			= sd_getgeo,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl		= sd_compat_ioctl,
@@ -1054,7 +1049,6 @@
 		good_bytes = sd_completed_bytes(SCpnt);
 		break;
 	case RECOVERED_ERROR:
-	case NO_SENSE:
 		/* Inform the user, but make sure that it's not treated
 		 * as a hard error.
 		 */
@@ -1063,6 +1057,15 @@
 		memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
 		good_bytes = scsi_bufflen(SCpnt);
 		break;
+	case NO_SENSE:
+		/* This indicates a false check condition, so ignore it.  An
+		 * unknown amount of data was transferred so treat it as an
+		 * error.
+		 */
+		scsi_print_sense("sd", SCpnt);
+		SCpnt->result = 0;
+		memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
+		break;
 	case ABORTED_COMMAND:
 		if (sshdr.asc == 0x10) { /* DIF: Disk detected corruption */
 			scsi_print_result(SCpnt);
@@ -1076,15 +1079,6 @@
 			scsi_print_sense("sd", SCpnt);
 			good_bytes = sd_completed_bytes(SCpnt);
 		}
-		if (!scsi_device_protection(SCpnt->device) &&
-		    SCpnt->device->use_10_for_rw &&
-		    (SCpnt->cmnd[0] == READ_10 ||
-		     SCpnt->cmnd[0] == WRITE_10))
-			SCpnt->device->use_10_for_rw = 0;
-		if (SCpnt->device->use_10_for_ms &&
-		    (SCpnt->cmnd[0] == MODE_SENSE_10 ||
-		     SCpnt->cmnd[0] == MODE_SELECT_10))
-			SCpnt->device->use_10_for_ms = 0;
 		break;
 	default:
 		break;
@@ -1437,7 +1431,7 @@
 
 	{
 		char cap_str_2[10], cap_str_10[10];
-		u64 sz = sdkp->capacity << ffz(~sector_size);
+		u64 sz = (u64)sdkp->capacity << ilog2(sector_size);
 
 		string_get_size(sz, STRING_UNITS_2, cap_str_2,
 				sizeof(cap_str_2));
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 93bd59a..9adf35b 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1059,7 +1059,7 @@
 			if (sg_allow_access(filp, &opcode))
 				return -EPERM;
 		}
-		return sg_scsi_ioctl(filp, sdp->device->request_queue, NULL, p);
+		return sg_scsi_ioctl(sdp->device->request_queue, NULL, filp->f_mode, p);
 	case SG_SET_DEBUG:
 		result = get_user(val, ip);
 		if (result)
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 0f17009..62b6633 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -471,38 +471,31 @@
 	return scsi_prep_return(q, rq, ret);
 }
 
-static int sr_block_open(struct inode *inode, struct file *file)
+static int sr_block_open(struct block_device *bdev, fmode_t mode)
 {
-	struct gendisk *disk = inode->i_bdev->bd_disk;
-	struct scsi_cd *cd;
-	int ret = 0;
+	struct scsi_cd *cd = scsi_cd_get(bdev->bd_disk);
+	int ret = -ENXIO;
 
-	if(!(cd = scsi_cd_get(disk)))
-		return -ENXIO;
-
-	if((ret = cdrom_open(&cd->cdi, inode, file)) != 0)
-		scsi_cd_put(cd);
-
+	if (cd) {
+		ret = cdrom_open(&cd->cdi, bdev, mode);
+		if (ret)
+			scsi_cd_put(cd);
+	}
 	return ret;
 }
 
-static int sr_block_release(struct inode *inode, struct file *file)
+static int sr_block_release(struct gendisk *disk, fmode_t mode)
 {
-	int ret;
-	struct scsi_cd *cd = scsi_cd(inode->i_bdev->bd_disk);
-	ret = cdrom_release(&cd->cdi, file);
-	if(ret)
-		return ret;
-	
+	struct scsi_cd *cd = scsi_cd(disk);
+	cdrom_release(&cd->cdi, mode);
 	scsi_cd_put(cd);
-
 	return 0;
 }
 
-static int sr_block_ioctl(struct inode *inode, struct file *file, unsigned cmd,
+static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
 			  unsigned long arg)
 {
-	struct scsi_cd *cd = scsi_cd(inode->i_bdev->bd_disk);
+	struct scsi_cd *cd = scsi_cd(bdev->bd_disk);
 	struct scsi_device *sdev = cd->device;
 	void __user *argp = (void __user *)arg;
 	int ret;
@@ -517,7 +510,7 @@
 		return scsi_ioctl(sdev, cmd, argp);
 	}
 
-	ret = cdrom_ioctl(file, &cd->cdi, inode, cmd, arg);
+	ret = cdrom_ioctl(&cd->cdi, bdev, mode, cmd, arg);
 	if (ret != -ENOSYS)
 		return ret;
 
@@ -527,7 +520,8 @@
 	 * case fall through to scsi_ioctl, which will return ENDOEV again
 	 * if it doesn't recognise the ioctl
 	 */
-	ret = scsi_nonblockable_ioctl(sdev, cmd, argp, NULL);
+	ret = scsi_nonblockable_ioctl(sdev, cmd, argp,
+					(mode & FMODE_NDELAY_NOW) != 0);
 	if (ret != -ENODEV)
 		return ret;
 	return scsi_ioctl(sdev, cmd, argp);
@@ -544,7 +538,7 @@
 	.owner		= THIS_MODULE,
 	.open		= sr_block_open,
 	.release	= sr_block_release,
-	.ioctl		= sr_block_ioctl,
+	.locked_ioctl	= sr_block_ioctl,
 	.media_changed	= sr_block_media_changed,
 	/* 
 	 * No compat_ioctl for now because sr_block_ioctl never
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 5c28d08..c959bdc 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -3263,7 +3263,8 @@
 	 * may try and take the device offline, in which case all further
 	 * access to the device is prohibited.
 	 */
-	retval = scsi_nonblockable_ioctl(STp->device, cmd_in, p, file);
+	retval = scsi_nonblockable_ioctl(STp->device, cmd_in, p,
+					file->f_flags & O_NDELAY);
 	if (!scsi_block_when_processing_errors(STp->device) || retval != -ENODEV)
 		goto out;
 	retval = 0;
@@ -3567,8 +3568,8 @@
 			    !capable(CAP_SYS_RAWIO))
 				i = -EPERM;
 			else
-				i = scsi_cmd_ioctl(file, STp->disk->queue,
-						   STp->disk, cmd_in, p);
+				i = scsi_cmd_ioctl(STp->disk->queue, STp->disk,
+						   file->f_mode, cmd_in, p);
 			if (i != -ENOTTY)
 				return i;
 			break;
diff --git a/drivers/scsi/sun3x_esp.c b/drivers/scsi/sun3x_esp.c
index 7514b3a..34a9962 100644
--- a/drivers/scsi/sun3x_esp.c
+++ b/drivers/scsi/sun3x_esp.c
@@ -213,7 +213,7 @@
 	esp->ops = &sun3x_esp_ops;
 
 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (!res && !res->start)
+	if (!res || !res->start)
 		goto fail_unlink;
 
 	esp->regs = ioremap_nocache(res->start, 0x20);
@@ -221,7 +221,7 @@
 		goto fail_unmap_regs;
 
 	res = platform_get_resource(dev, IORESOURCE_MEM, 1);
-	if (!res && !res->start)
+	if (!res || !res->start)
 		goto fail_unmap_regs;
 
 	esp->dma_regs = ioremap_nocache(res->start, 0x10);
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index c014ffb1..5450a0e 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -1100,6 +1100,8 @@
 	pbn_b0_4_1843200_200,
 	pbn_b0_8_1843200_200,
 
+	pbn_b0_1_4000000,
+
 	pbn_b0_bt_1_115200,
 	pbn_b0_bt_2_115200,
 	pbn_b0_bt_8_115200,
@@ -1167,6 +1169,10 @@
 	pbn_exsys_4055,
 	pbn_plx_romulus,
 	pbn_oxsemi,
+	pbn_oxsemi_1_4000000,
+	pbn_oxsemi_2_4000000,
+	pbn_oxsemi_4_4000000,
+	pbn_oxsemi_8_4000000,
 	pbn_intel_i960,
 	pbn_sgi_ioc3,
 	pbn_computone_4,
@@ -1290,6 +1296,12 @@
 		.base_baud	= 1843200,
 		.uart_offset	= 0x200,
 	},
+	[pbn_b0_1_4000000] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 4000000,
+		.uart_offset	= 8,
+	},
 
 	[pbn_b0_bt_1_115200] = {
 		.flags		= FL_BASE0|FL_BASE_BARS,
@@ -1625,6 +1637,35 @@
 		.base_baud	= 115200,
 		.uart_offset	= 8,
 	},
+	[pbn_oxsemi_1_4000000] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 4000000,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
+	[pbn_oxsemi_2_4000000] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 4000000,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
+	[pbn_oxsemi_4_4000000] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 4000000,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
+	[pbn_oxsemi_8_4000000] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 8,
+		.base_baud	= 4000000,
+		.uart_offset	= 0x200,
+		.first_offset	= 0x1000,
+	},
+
 
 	/*
 	 * EKF addition for i960 Boards form EKF with serial port.
@@ -1813,6 +1854,39 @@
 	    board->first_offset == guessed->first_offset;
 }
 
+/*
+ * Oxford Semiconductor Inc.
+ * Check that device is part of the Tornado range of devices, then determine
+ * the number of ports available on the device.
+ */
+static int pci_oxsemi_tornado_init(struct pci_dev *dev, struct pciserial_board *board)
+{
+	u8 __iomem *p;
+	unsigned long deviceID;
+	unsigned int  number_uarts;
+
+	/* OxSemi Tornado devices are all 0xCxxx */
+	if (dev->vendor == PCI_VENDOR_ID_OXSEMI &&
+	    (dev->device & 0xF000) != 0xC000)
+		return 0;
+
+	p = pci_iomap(dev, 0, 5);
+	if (p == NULL)
+		return -ENOMEM;
+
+	deviceID = ioread32(p);
+	/* Tornado device */
+	if (deviceID == 0x07000200) {
+		number_uarts = ioread8(p + 4);
+		board->num_ports = number_uarts;
+		printk(KERN_DEBUG
+			"%d ports detected on Oxford PCI Express device\n",
+								number_uarts);
+	}
+	pci_iounmap(dev, p);
+	return 0;
+}
+
 struct serial_private *
 pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board)
 {
@@ -1821,6 +1895,13 @@
 	struct pci_serial_quirk *quirk;
 	int rc, nr_ports, i;
 
+	/*
+	 * Find number of ports on board
+	 */
+	if (dev->vendor == PCI_VENDOR_ID_OXSEMI ||
+	    dev->vendor == PCI_VENDOR_ID_MAINPINE)
+		pci_oxsemi_tornado_init(dev, board);
+
 	nr_ports = board->num_ports;
 
 	/*
@@ -2301,6 +2382,156 @@
 		pbn_b0_bt_2_921600 },
 
 	/*
+	 * Oxford Semiconductor Inc. Tornado PCI express device range.
+	 */
+	{	PCI_VENDOR_ID_OXSEMI, 0xc101,    /* OXPCIe952 1 Legacy UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc105,    /* OXPCIe952 1 Legacy UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc11b,    /* OXPCIe952 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc11f,    /* OXPCIe952 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc120,    /* OXPCIe952 1 Legacy UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc124,    /* OXPCIe952 1 Legacy UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc138,    /* OXPCIe952 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc13d,    /* OXPCIe952 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc140,    /* OXPCIe952 1 Legacy UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc141,    /* OXPCIe952 1 Legacy UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc144,    /* OXPCIe952 1 Legacy UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc145,    /* OXPCIe952 1 Legacy UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc158,    /* OXPCIe952 2 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc15d,    /* OXPCIe952 2 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc208,    /* OXPCIe954 4 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_4_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc20d,    /* OXPCIe954 4 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_4_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc308,    /* OXPCIe958 8 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_8_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc30d,    /* OXPCIe958 8 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_8_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc40b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc40f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc41b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc41f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc42b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc42f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc43b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc43f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc44b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc44f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc45b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc45f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc46b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc46f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc47b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc47f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc48b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc48f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc49b,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc49f,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc4ab,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc4af,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc4bb,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc4bf,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc4cb,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0xc4cf,    /* OXPCIe200 1 Native UART */
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	/*
+	 * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado
+	 */
+	{	PCI_VENDOR_ID_MAINPINE, 0x4000,	/* IQ Express 1 Port V.34 Super-G3 Fax */
+		PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_MAINPINE, 0x4000,	/* IQ Express 2 Port V.34 Super-G3 Fax */
+		PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0,
+		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_MAINPINE, 0x4000,	/* IQ Express 4 Port V.34 Super-G3 Fax */
+		PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0,
+		pbn_oxsemi_4_4000000 },
+	{	PCI_VENDOR_ID_MAINPINE, 0x4000,	/* IQ Express 8 Port V.34 Super-G3 Fax */
+		PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0,
+		pbn_oxsemi_8_4000000 },
+	/*
 	 * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
 	 * from skokodyn@yahoo.com
 	 */
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index db783b7..c94d3c4 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -457,7 +457,7 @@
 
 config SERIAL_SAMSUNG_DEBUG
 	bool "Samsung SoC serial debug"
-	depends on SERIAL_SAMSUNG
+	depends on SERIAL_SAMSUNG && DEBUG_LL
 	help
 	  Add support for debugging the serial driver. Since this is
 	  generally being used as a console, we use our own output
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 2a79dec..e1654f5 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -43,4 +43,6 @@
 
 source "drivers/staging/at76_usb/Kconfig"
 
+source "drivers/staging/poch/Kconfig"
+
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 325bca4..71c4d53 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -13,3 +13,4 @@
 obj-$(CONFIG_PRISM2_USB)	+= wlan-ng/
 obj-$(CONFIG_ECHO)		+= echo/
 obj-$(CONFIG_USB_ATMEL)		+= at76_usb/
+obj-$(CONFIG_POCH)		+= poch/
diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c
index 52df0c6..174e2be 100644
--- a/drivers/staging/at76_usb/at76_usb.c
+++ b/drivers/staging/at76_usb/at76_usb.c
@@ -2319,9 +2319,11 @@
 	if (!iwe)
 		return -ENOMEM;
 
-	if (priv->scan_state != SCAN_COMPLETED)
+	if (priv->scan_state != SCAN_COMPLETED) {
 		/* scan not yet finished */
+		kfree(iwe);
 		return -EAGAIN;
+	}
 
 	spin_lock_irqsave(&priv->bss_list_spinlock, flags);
 
diff --git a/drivers/staging/echo/bit_operations.h b/drivers/staging/echo/bit_operations.h
index b32f4bf..cecdcf3 100644
--- a/drivers/staging/echo/bit_operations.h
+++ b/drivers/staging/echo/bit_operations.h
@@ -30,114 +30,98 @@
 #if !defined(_BIT_OPERATIONS_H_)
 #define _BIT_OPERATIONS_H_
 
-#ifdef __cplusplus
-extern "C" {
-#endif
-
 #if defined(__i386__)  ||  defined(__x86_64__)
 /*! \brief Find the bit position of the highest set bit in a word
     \param bits The word to be searched
     \return The bit number of the highest set bit, or -1 if the word is zero. */
 static __inline__ int top_bit(unsigned int bits)
 {
-    int res;
+	int res;
 
-    __asm__ (" xorl %[res],%[res];\n"
-             " decl %[res];\n"
-             " bsrl %[bits],%[res]\n"
-             : [res] "=&r" (res)
-             : [bits] "rm" (bits));
-    return res;
+	__asm__(" xorl %[res],%[res];\n"
+		" decl %[res];\n"
+		" bsrl %[bits],%[res]\n"
+		:[res] "=&r" (res)
+		:[bits] "rm"(bits)
+	);
+	return res;
 }
-/*- End of function --------------------------------------------------------*/
 
 /*! \brief Find the bit position of the lowest set bit in a word
     \param bits The word to be searched
     \return The bit number of the lowest set bit, or -1 if the word is zero. */
 static __inline__ int bottom_bit(unsigned int bits)
 {
-    int res;
+	int res;
 
-    __asm__ (" xorl %[res],%[res];\n"
-             " decl %[res];\n"
-             " bsfl %[bits],%[res]\n"
-             : [res] "=&r" (res)
-             : [bits] "rm" (bits));
-    return res;
+	__asm__(" xorl %[res],%[res];\n"
+		" decl %[res];\n"
+		" bsfl %[bits],%[res]\n"
+		:[res] "=&r" (res)
+		:[bits] "rm"(bits)
+	);
+	return res;
 }
-/*- End of function --------------------------------------------------------*/
 #else
 static __inline__ int top_bit(unsigned int bits)
 {
-    int i;
+	int i;
 
-    if (bits == 0)
-        return -1;
-    i = 0;
-    if (bits & 0xFFFF0000)
-    {
-        bits &= 0xFFFF0000;
-        i += 16;
-    }
-    if (bits & 0xFF00FF00)
-    {
-        bits &= 0xFF00FF00;
-        i += 8;
-    }
-    if (bits & 0xF0F0F0F0)
-    {
-        bits &= 0xF0F0F0F0;
-        i += 4;
-    }
-    if (bits & 0xCCCCCCCC)
-    {
-        bits &= 0xCCCCCCCC;
-        i += 2;
-    }
-    if (bits & 0xAAAAAAAA)
-    {
-        bits &= 0xAAAAAAAA;
-        i += 1;
-    }
-    return i;
+	if (bits == 0)
+		return -1;
+	i = 0;
+	if (bits & 0xFFFF0000) {
+		bits &= 0xFFFF0000;
+		i += 16;
+	}
+	if (bits & 0xFF00FF00) {
+		bits &= 0xFF00FF00;
+		i += 8;
+	}
+	if (bits & 0xF0F0F0F0) {
+		bits &= 0xF0F0F0F0;
+		i += 4;
+	}
+	if (bits & 0xCCCCCCCC) {
+		bits &= 0xCCCCCCCC;
+		i += 2;
+	}
+	if (bits & 0xAAAAAAAA) {
+		bits &= 0xAAAAAAAA;
+		i += 1;
+	}
+	return i;
 }
-/*- End of function --------------------------------------------------------*/
 
 static __inline__ int bottom_bit(unsigned int bits)
 {
-    int i;
+	int i;
 
-    if (bits == 0)
-        return -1;
-    i = 32;
-    if (bits & 0x0000FFFF)
-    {
-        bits &= 0x0000FFFF;
-        i -= 16;
-    }
-    if (bits & 0x00FF00FF)
-    {
-        bits &= 0x00FF00FF;
-        i -= 8;
-    }
-    if (bits & 0x0F0F0F0F)
-    {
-        bits &= 0x0F0F0F0F;
-        i -= 4;
-    }
-    if (bits & 0x33333333)
-    {
-        bits &= 0x33333333;
-        i -= 2;
-    }
-    if (bits & 0x55555555)
-    {
-        bits &= 0x55555555;
-        i -= 1;
-    }
-    return i;
+	if (bits == 0)
+		return -1;
+	i = 32;
+	if (bits & 0x0000FFFF) {
+		bits &= 0x0000FFFF;
+		i -= 16;
+	}
+	if (bits & 0x00FF00FF) {
+		bits &= 0x00FF00FF;
+		i -= 8;
+	}
+	if (bits & 0x0F0F0F0F) {
+		bits &= 0x0F0F0F0F;
+		i -= 4;
+	}
+	if (bits & 0x33333333) {
+		bits &= 0x33333333;
+		i -= 2;
+	}
+	if (bits & 0x55555555) {
+		bits &= 0x55555555;
+		i -= 1;
+	}
+	return i;
 }
-/*- End of function --------------------------------------------------------*/
 #endif
 
 /*! \brief Bit reverse a byte.
@@ -146,16 +130,16 @@
 static __inline__ uint8_t bit_reverse8(uint8_t x)
 {
 #if defined(__i386__)  ||  defined(__x86_64__)
-    /* If multiply is fast */
-    return ((x*0x0802U & 0x22110U) | (x*0x8020U & 0x88440U))*0x10101U >> 16;
+	/* If multiply is fast */
+	return ((x * 0x0802U & 0x22110U) | (x * 0x8020U & 0x88440U)) *
+	    0x10101U >> 16;
 #else
-    /* If multiply is slow, but we have a barrel shifter */
-    x = (x >> 4) | (x << 4);
-    x = ((x & 0xCC) >> 2) | ((x & 0x33) << 2);
-    return ((x & 0xAA) >> 1) | ((x & 0x55) << 1);
+	/* If multiply is slow, but we have a barrel shifter */
+	x = (x >> 4) | (x << 4);
+	x = ((x & 0xCC) >> 2) | ((x & 0x33) << 2);
+	return ((x & 0xAA) >> 1) | ((x & 0x55) << 1);
 #endif
 }
-/*- End of function --------------------------------------------------------*/
 
 /*! \brief Bit reverse a 16 bit word.
     \param data The word to be reversed.
@@ -193,9 +177,8 @@
     \return The word with the single set bit. */
 static __inline__ uint32_t least_significant_one32(uint32_t x)
 {
-    return (x & (-(int32_t) x));
+	return (x & (-(int32_t) x));
 }
-/*- End of function --------------------------------------------------------*/
 
 /*! \brief Find the most significant one in a word, and return a word
            with just that bit set.
@@ -204,50 +187,42 @@
 static __inline__ uint32_t most_significant_one32(uint32_t x)
 {
 #if defined(__i386__)  ||  defined(__x86_64__)
-    return 1 << top_bit(x);
+	return 1 << top_bit(x);
 #else
-    x = make_mask32(x);
-    return (x ^ (x >> 1));
+	x = make_mask32(x);
+	return (x ^ (x >> 1));
 #endif
 }
-/*- End of function --------------------------------------------------------*/
 
 /*! \brief Find the parity of a byte.
     \param x The byte to be checked.
     \return 1 for odd, or 0 for even. */
 static __inline__ int parity8(uint8_t x)
 {
-    x = (x ^ (x >> 4)) & 0x0F;
-    return (0x6996 >> x) & 1;
+	x = (x ^ (x >> 4)) & 0x0F;
+	return (0x6996 >> x) & 1;
 }
-/*- End of function --------------------------------------------------------*/
 
 /*! \brief Find the parity of a 16 bit word.
     \param x The word to be checked.
     \return 1 for odd, or 0 for even. */
 static __inline__ int parity16(uint16_t x)
 {
-    x ^= (x >> 8);
-    x = (x ^ (x >> 4)) & 0x0F;
-    return (0x6996 >> x) & 1;
+	x ^= (x >> 8);
+	x = (x ^ (x >> 4)) & 0x0F;
+	return (0x6996 >> x) & 1;
 }
-/*- End of function --------------------------------------------------------*/
 
 /*! \brief Find the parity of a 32 bit word.
     \param x The word to be checked.
     \return 1 for odd, or 0 for even. */
 static __inline__ int parity32(uint32_t x)
 {
-    x ^= (x >> 16);
-    x ^= (x >> 8);
-    x = (x ^ (x >> 4)) & 0x0F;
-    return (0x6996 >> x) & 1;
+	x ^= (x >> 16);
+	x ^= (x >> 8);
+	x = (x ^ (x >> 4)) & 0x0F;
+	return (0x6996 >> x) & 1;
 }
-/*- End of function --------------------------------------------------------*/
-
-#ifdef __cplusplus
-}
-#endif
 
 #endif
 /*- End of file ------------------------------------------------------------*/
diff --git a/drivers/staging/echo/echo.c b/drivers/staging/echo/echo.c
index 4a281b1..b8f2c5e 100644
--- a/drivers/staging/echo/echo.c
+++ b/drivers/staging/echo/echo.c
@@ -74,7 +74,6 @@
 
    Steve also has some nice notes on echo cancellers in echo.h
 
-
    References:
 
    [1] Ochiai, Areseki, and Ogihara, "Echo Canceller with Two Echo
@@ -105,20 +104,18 @@
    Mark, Pawel, and Pavel.
 */
 
-#include <linux/kernel.h>       /* We're doing kernel work */
+#include <linux/kernel.h>	/* We're doing kernel work */
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#define malloc(a) kmalloc((a), GFP_KERNEL)
-#define free(a) kfree(a)
 
 #include "bit_operations.h"
 #include "echo.h"
 
 #define MIN_TX_POWER_FOR_ADAPTION   64
 #define MIN_RX_POWER_FOR_ADAPTION   64
-#define DTD_HANGOVER               600     /* 600 samples, or 75ms     */
-#define DC_LOG2BETA                  3     /* log2() of DC filter Beta */
+#define DTD_HANGOVER               600	/* 600 samples, or 75ms     */
+#define DC_LOG2BETA                  3	/* log2() of DC filter Beta */
 
 /*-----------------------------------------------------------------------*\
                                FUNCTIONS
@@ -126,59 +123,58 @@
 
 /* adapting coeffs using the traditional stochastic descent (N)LMS algorithm */
 
-
-#ifdef __BLACKFIN_ASM__
-static void __inline__ lms_adapt_bg(echo_can_state_t *ec, int clean, int shift)
+#ifdef __bfin__
+static void __inline__ lms_adapt_bg(struct oslec_state *ec, int clean,
+				    int shift)
 {
-    int i, j;
-    int offset1;
-    int offset2;
-    int factor;
-    int exp;
-    int16_t *phist;
-    int n;
+	int i, j;
+	int offset1;
+	int offset2;
+	int factor;
+	int exp;
+	int16_t *phist;
+	int n;
 
-    if (shift > 0)
-	factor = clean << shift;
-    else
-	factor = clean >> -shift;
+	if (shift > 0)
+		factor = clean << shift;
+	else
+		factor = clean >> -shift;
 
-    /* Update the FIR taps */
+	/* Update the FIR taps */
 
-    offset2 = ec->curr_pos;
-    offset1 = ec->taps - offset2;
-    phist = &ec->fir_state_bg.history[offset2];
+	offset2 = ec->curr_pos;
+	offset1 = ec->taps - offset2;
+	phist = &ec->fir_state_bg.history[offset2];
 
-    /* st: and en: help us locate the assembler in echo.s */
+	/* st: and en: help us locate the assembler in echo.s */
 
-    //asm("st:");
-    n = ec->taps;
-    for (i = 0, j = offset2;  i < n;  i++, j++)
-    {
-       exp = *phist++ * factor;
-       ec->fir_taps16[1][i] += (int16_t) ((exp+(1<<14)) >> 15);
-    }
-    //asm("en:");
+	//asm("st:");
+	n = ec->taps;
+	for (i = 0, j = offset2; i < n; i++, j++) {
+		exp = *phist++ * factor;
+		ec->fir_taps16[1][i] += (int16_t) ((exp + (1 << 14)) >> 15);
+	}
+	//asm("en:");
 
-    /* Note the asm for the inner loop above generated by Blackfin gcc
-       4.1.1 is pretty good (note even parallel instructions used):
+	/* Note the asm for the inner loop above generated by Blackfin gcc
+	   4.1.1 is pretty good (note even parallel instructions used):
 
-    	R0 = W [P0++] (X);
-	R0 *= R2;
-	R0 = R0 + R3 (NS) ||
-	R1 = W [P1] (X) ||
-	nop;
-	R0 >>>= 15;
-	R0 = R0 + R1;
-	W [P1++] = R0;
+	   R0 = W [P0++] (X);
+	   R0 *= R2;
+	   R0 = R0 + R3 (NS) ||
+	   R1 = W [P1] (X) ||
+	   nop;
+	   R0 >>>= 15;
+	   R0 = R0 + R1;
+	   W [P1++] = R0;
 
-	A block based update algorithm would be much faster but the
-	above can't be improved on much.  Every instruction saved in
-	the loop above is 2 MIPs/ch!  The for loop above is where the
-	Blackfin spends most of it's time - about 17 MIPs/ch measured
-	with speedtest.c with 256 taps (32ms).  Write-back and
-	Write-through cache gave about the same performance.
-    */
+	   A block based update algorithm would be much faster but the
+	   above can't be improved on much.  Every instruction saved in
+	   the loop above is 2 MIPs/ch!  The for loop above is where the
+	   Blackfin spends most of it's time - about 17 MIPs/ch measured
+	   with speedtest.c with 256 taps (32ms).  Write-back and
+	   Write-through cache gave about the same performance.
+	 */
 }
 
 /*
@@ -200,392 +196,393 @@
 */
 
 #else
-static __inline__ void lms_adapt_bg(echo_can_state_t *ec, int clean, int shift)
+static __inline__ void lms_adapt_bg(struct oslec_state *ec, int clean,
+				    int shift)
 {
-    int i;
+	int i;
 
-    int offset1;
-    int offset2;
-    int factor;
-    int exp;
+	int offset1;
+	int offset2;
+	int factor;
+	int exp;
 
-    if (shift > 0)
-	factor = clean << shift;
-    else
-	factor = clean >> -shift;
+	if (shift > 0)
+		factor = clean << shift;
+	else
+		factor = clean >> -shift;
 
-    /* Update the FIR taps */
+	/* Update the FIR taps */
 
-    offset2 = ec->curr_pos;
-    offset1 = ec->taps - offset2;
+	offset2 = ec->curr_pos;
+	offset1 = ec->taps - offset2;
 
-    for (i = ec->taps - 1;  i >= offset1;  i--)
-    {
-       exp = (ec->fir_state_bg.history[i - offset1]*factor);
-       ec->fir_taps16[1][i] += (int16_t) ((exp+(1<<14)) >> 15);
-    }
-    for (  ;  i >= 0;  i--)
-    {
-       exp = (ec->fir_state_bg.history[i + offset2]*factor);
-       ec->fir_taps16[1][i] += (int16_t) ((exp+(1<<14)) >> 15);
-    }
+	for (i = ec->taps - 1; i >= offset1; i--) {
+		exp = (ec->fir_state_bg.history[i - offset1] * factor);
+		ec->fir_taps16[1][i] += (int16_t) ((exp + (1 << 14)) >> 15);
+	}
+	for (; i >= 0; i--) {
+		exp = (ec->fir_state_bg.history[i + offset2] * factor);
+		ec->fir_taps16[1][i] += (int16_t) ((exp + (1 << 14)) >> 15);
+	}
 }
 #endif
 
-/*- End of function --------------------------------------------------------*/
-
-echo_can_state_t *echo_can_create(int len, int adaption_mode)
+struct oslec_state *oslec_create(int len, int adaption_mode)
 {
-    echo_can_state_t *ec;
-    int i;
-    int j;
+	struct oslec_state *ec;
+	int i;
 
-    ec = kmalloc(sizeof(*ec), GFP_KERNEL);
-    if (ec == NULL)
-        return  NULL;
-    memset(ec, 0, sizeof(*ec));
+	ec = kzalloc(sizeof(*ec), GFP_KERNEL);
+	if (!ec)
+		return NULL;
 
-    ec->taps = len;
-    ec->log2taps = top_bit(len);
-    ec->curr_pos = ec->taps - 1;
+	ec->taps = len;
+	ec->log2taps = top_bit(len);
+	ec->curr_pos = ec->taps - 1;
 
-    for (i = 0;  i < 2;  i++)
-    {
-        if ((ec->fir_taps16[i] = (int16_t *) malloc((ec->taps)*sizeof(int16_t))) == NULL)
-        {
-            for (j = 0;  j < i;  j++)
-                kfree(ec->fir_taps16[j]);
-            kfree(ec);
-            return  NULL;
-        }
-        memset(ec->fir_taps16[i], 0, (ec->taps)*sizeof(int16_t));
-    }
+	for (i = 0; i < 2; i++) {
+		ec->fir_taps16[i] =
+		    kcalloc(ec->taps, sizeof(int16_t), GFP_KERNEL);
+		if (!ec->fir_taps16[i])
+			goto error_oom;
+	}
 
-    fir16_create(&ec->fir_state,
-                 ec->fir_taps16[0],
-                 ec->taps);
-    fir16_create(&ec->fir_state_bg,
-                 ec->fir_taps16[1],
-                 ec->taps);
+	fir16_create(&ec->fir_state, ec->fir_taps16[0], ec->taps);
+	fir16_create(&ec->fir_state_bg, ec->fir_taps16[1], ec->taps);
 
-    for(i=0; i<5; i++) {
-      ec->xvtx[i] = ec->yvtx[i] = ec->xvrx[i] = ec->yvrx[i] = 0;
-    }
+	for (i = 0; i < 5; i++) {
+		ec->xvtx[i] = ec->yvtx[i] = ec->xvrx[i] = ec->yvrx[i] = 0;
+	}
 
-    ec->cng_level = 1000;
-    echo_can_adaption_mode(ec, adaption_mode);
+	ec->cng_level = 1000;
+	oslec_adaption_mode(ec, adaption_mode);
 
-    ec->snapshot = (int16_t*)malloc(ec->taps*sizeof(int16_t));
-    memset(ec->snapshot, 0, sizeof(int16_t)*ec->taps);
+	ec->snapshot = kcalloc(ec->taps, sizeof(int16_t), GFP_KERNEL);
+	if (!ec->snapshot)
+		goto error_oom;
 
-    ec->cond_met = 0;
-    ec->Pstates = 0;
-    ec->Ltxacc = ec->Lrxacc = ec->Lcleanacc = ec->Lclean_bgacc = 0;
-    ec->Ltx = ec->Lrx = ec->Lclean = ec->Lclean_bg = 0;
-    ec->tx_1 = ec->tx_2 = ec->rx_1 = ec->rx_2 = 0;
-    ec->Lbgn = ec->Lbgn_acc = 0;
-    ec->Lbgn_upper = 200;
-    ec->Lbgn_upper_acc = ec->Lbgn_upper << 13;
+	ec->cond_met = 0;
+	ec->Pstates = 0;
+	ec->Ltxacc = ec->Lrxacc = ec->Lcleanacc = ec->Lclean_bgacc = 0;
+	ec->Ltx = ec->Lrx = ec->Lclean = ec->Lclean_bg = 0;
+	ec->tx_1 = ec->tx_2 = ec->rx_1 = ec->rx_2 = 0;
+	ec->Lbgn = ec->Lbgn_acc = 0;
+	ec->Lbgn_upper = 200;
+	ec->Lbgn_upper_acc = ec->Lbgn_upper << 13;
 
-    return  ec;
+	return ec;
+
+      error_oom:
+	for (i = 0; i < 2; i++)
+		kfree(ec->fir_taps16[i]);
+
+	kfree(ec);
+	return NULL;
 }
-/*- End of function --------------------------------------------------------*/
 
-void echo_can_free(echo_can_state_t *ec)
+EXPORT_SYMBOL_GPL(oslec_create);
+
+void oslec_free(struct oslec_state *ec)
 {
 	int i;
 
 	fir16_free(&ec->fir_state);
 	fir16_free(&ec->fir_state_bg);
-	for (i = 0;  i < 2;  i++)
+	for (i = 0; i < 2; i++)
 		kfree(ec->fir_taps16[i]);
 	kfree(ec->snapshot);
 	kfree(ec);
 }
-/*- End of function --------------------------------------------------------*/
 
-void echo_can_adaption_mode(echo_can_state_t *ec, int adaption_mode)
+EXPORT_SYMBOL_GPL(oslec_free);
+
+void oslec_adaption_mode(struct oslec_state *ec, int adaption_mode)
 {
-    ec->adaption_mode = adaption_mode;
+	ec->adaption_mode = adaption_mode;
 }
-/*- End of function --------------------------------------------------------*/
 
-void echo_can_flush(echo_can_state_t *ec)
+EXPORT_SYMBOL_GPL(oslec_adaption_mode);
+
+void oslec_flush(struct oslec_state *ec)
 {
-    int i;
+	int i;
 
-    ec->Ltxacc = ec->Lrxacc = ec->Lcleanacc = ec->Lclean_bgacc = 0;
-    ec->Ltx = ec->Lrx = ec->Lclean = ec->Lclean_bg = 0;
-    ec->tx_1 = ec->tx_2 = ec->rx_1 = ec->rx_2 = 0;
+	ec->Ltxacc = ec->Lrxacc = ec->Lcleanacc = ec->Lclean_bgacc = 0;
+	ec->Ltx = ec->Lrx = ec->Lclean = ec->Lclean_bg = 0;
+	ec->tx_1 = ec->tx_2 = ec->rx_1 = ec->rx_2 = 0;
 
-    ec->Lbgn = ec->Lbgn_acc = 0;
-    ec->Lbgn_upper = 200;
-    ec->Lbgn_upper_acc = ec->Lbgn_upper << 13;
+	ec->Lbgn = ec->Lbgn_acc = 0;
+	ec->Lbgn_upper = 200;
+	ec->Lbgn_upper_acc = ec->Lbgn_upper << 13;
 
-    ec->nonupdate_dwell = 0;
+	ec->nonupdate_dwell = 0;
 
-    fir16_flush(&ec->fir_state);
-    fir16_flush(&ec->fir_state_bg);
-    ec->fir_state.curr_pos = ec->taps - 1;
-    ec->fir_state_bg.curr_pos = ec->taps - 1;
-    for (i = 0;  i < 2;  i++)
-        memset(ec->fir_taps16[i], 0, ec->taps*sizeof(int16_t));
+	fir16_flush(&ec->fir_state);
+	fir16_flush(&ec->fir_state_bg);
+	ec->fir_state.curr_pos = ec->taps - 1;
+	ec->fir_state_bg.curr_pos = ec->taps - 1;
+	for (i = 0; i < 2; i++)
+		memset(ec->fir_taps16[i], 0, ec->taps * sizeof(int16_t));
 
-    ec->curr_pos = ec->taps - 1;
-    ec->Pstates = 0;
+	ec->curr_pos = ec->taps - 1;
+	ec->Pstates = 0;
 }
-/*- End of function --------------------------------------------------------*/
 
-void echo_can_snapshot(echo_can_state_t *ec) {
-    memcpy(ec->snapshot, ec->fir_taps16[0], ec->taps*sizeof(int16_t));
+EXPORT_SYMBOL_GPL(oslec_flush);
+
+void oslec_snapshot(struct oslec_state *ec)
+{
+	memcpy(ec->snapshot, ec->fir_taps16[0], ec->taps * sizeof(int16_t));
 }
-/*- End of function --------------------------------------------------------*/
+
+EXPORT_SYMBOL_GPL(oslec_snapshot);
 
 /* Dual Path Echo Canceller ------------------------------------------------*/
 
-int16_t echo_can_update(echo_can_state_t *ec, int16_t tx, int16_t rx)
+int16_t oslec_update(struct oslec_state *ec, int16_t tx, int16_t rx)
 {
-    int32_t echo_value;
-    int clean_bg;
-    int tmp, tmp1;
+	int32_t echo_value;
+	int clean_bg;
+	int tmp, tmp1;
 
-    /* Input scaling was found be required to prevent problems when tx
-       starts clipping.  Another possible way to handle this would be the
-       filter coefficent scaling. */
+	/* Input scaling was found be required to prevent problems when tx
+	   starts clipping.  Another possible way to handle this would be the
+	   filter coefficent scaling. */
 
-    ec->tx = tx; ec->rx = rx;
-    tx >>=1;
-    rx >>=1;
+	ec->tx = tx;
+	ec->rx = rx;
+	tx >>= 1;
+	rx >>= 1;
 
-    /*
-       Filter DC, 3dB point is 160Hz (I think), note 32 bit precision required
-       otherwise values do not track down to 0. Zero at DC, Pole at (1-Beta)
-       only real axis.  Some chip sets (like Si labs) don't need
-       this, but something like a $10 X100P card does.  Any DC really slows
-       down convergence.
+	/*
+	   Filter DC, 3dB point is 160Hz (I think), note 32 bit precision required
+	   otherwise values do not track down to 0. Zero at DC, Pole at (1-Beta)
+	   only real axis.  Some chip sets (like Si labs) don't need
+	   this, but something like a $10 X100P card does.  Any DC really slows
+	   down convergence.
 
-       Note: removes some low frequency from the signal, this reduces
-       the speech quality when listening to samples through headphones
-       but may not be obvious through a telephone handset.
+	   Note: removes some low frequency from the signal, this reduces
+	   the speech quality when listening to samples through headphones
+	   but may not be obvious through a telephone handset.
 
-       Note that the 3dB frequency in radians is approx Beta, e.g. for
-       Beta = 2^(-3) = 0.125, 3dB freq is 0.125 rads = 159Hz.
-    */
+	   Note that the 3dB frequency in radians is approx Beta, e.g. for
+	   Beta = 2^(-3) = 0.125, 3dB freq is 0.125 rads = 159Hz.
+	 */
 
-    if (ec->adaption_mode & ECHO_CAN_USE_RX_HPF) {
-      tmp = rx << 15;
+	if (ec->adaption_mode & ECHO_CAN_USE_RX_HPF) {
+		tmp = rx << 15;
 #if 1
-        /* Make sure the gain of the HPF is 1.0. This can still saturate a little under
-           impulse conditions, and it might roll to 32768 and need clipping on sustained peak
-           level signals. However, the scale of such clipping is small, and the error due to
-           any saturation should not markedly affect the downstream processing. */
-        tmp -= (tmp >> 4);
+		/* Make sure the gain of the HPF is 1.0. This can still saturate a little under
+		   impulse conditions, and it might roll to 32768 and need clipping on sustained peak
+		   level signals. However, the scale of such clipping is small, and the error due to
+		   any saturation should not markedly affect the downstream processing. */
+		tmp -= (tmp >> 4);
 #endif
-      ec->rx_1 += -(ec->rx_1>>DC_LOG2BETA) + tmp - ec->rx_2;
+		ec->rx_1 += -(ec->rx_1 >> DC_LOG2BETA) + tmp - ec->rx_2;
 
-      /* hard limit filter to prevent clipping.  Note that at this stage
-	 rx should be limited to +/- 16383 due to right shift above */
-      tmp1 = ec->rx_1 >> 15;
-      if (tmp1 > 16383) tmp1 = 16383;
-      if (tmp1 < -16383) tmp1 = -16383;
-      rx = tmp1;
-      ec->rx_2 = tmp;
-    }
-
-    /* Block average of power in the filter states.  Used for
-       adaption power calculation. */
-
-    {
-	int new, old;
-
-	/* efficient "out with the old and in with the new" algorithm so
-	   we don't have to recalculate over the whole block of
-	   samples. */
-	new = (int)tx * (int)tx;
-	old = (int)ec->fir_state.history[ec->fir_state.curr_pos] *
-              (int)ec->fir_state.history[ec->fir_state.curr_pos];
-	ec->Pstates += ((new - old) + (1<<ec->log2taps)) >> ec->log2taps;
-	if (ec->Pstates < 0) ec->Pstates = 0;
-    }
-
-    /* Calculate short term average levels using simple single pole IIRs */
-
-    ec->Ltxacc += abs(tx) - ec->Ltx;
-    ec->Ltx = (ec->Ltxacc + (1<<4)) >> 5;
-    ec->Lrxacc += abs(rx) - ec->Lrx;
-    ec->Lrx = (ec->Lrxacc + (1<<4)) >> 5;
-
-    /* Foreground filter ---------------------------------------------------*/
-
-    ec->fir_state.coeffs = ec->fir_taps16[0];
-    echo_value = fir16(&ec->fir_state, tx);
-    ec->clean = rx - echo_value;
-    ec->Lcleanacc += abs(ec->clean) - ec->Lclean;
-    ec->Lclean = (ec->Lcleanacc + (1<<4)) >> 5;
-
-    /* Background filter ---------------------------------------------------*/
-
-    echo_value = fir16(&ec->fir_state_bg, tx);
-    clean_bg = rx - echo_value;
-    ec->Lclean_bgacc += abs(clean_bg) - ec->Lclean_bg;
-    ec->Lclean_bg = (ec->Lclean_bgacc + (1<<4)) >> 5;
-
-    /* Background Filter adaption -----------------------------------------*/
-
-    /* Almost always adap bg filter, just simple DT and energy
-       detection to minimise adaption in cases of strong double talk.
-       However this is not critical for the dual path algorithm.
-    */
-    ec->factor = 0;
-    ec->shift = 0;
-    if ((ec->nonupdate_dwell == 0)) {
-	int   P, logP, shift;
-
-	/* Determine:
-
-	   f = Beta * clean_bg_rx/P ------ (1)
-
-	   where P is the total power in the filter states.
-
-	   The Boffins have shown that if we obey (1) we converge
-	   quickly and avoid instability.
-
-	   The correct factor f must be in Q30, as this is the fixed
-	   point format required by the lms_adapt_bg() function,
-	   therefore the scaled version of (1) is:
-
-	   (2^30) * f  = (2^30) * Beta * clean_bg_rx/P
-	       factor  = (2^30) * Beta * clean_bg_rx/P         ----- (2)
-
-	   We have chosen Beta = 0.25 by experiment, so:
-
-	       factor  = (2^30) * (2^-2) * clean_bg_rx/P
-
-                                       (30 - 2 - log2(P))
-	       factor  = clean_bg_rx 2                         ----- (3)
-
-	   To avoid a divide we approximate log2(P) as top_bit(P),
-	   which returns the position of the highest non-zero bit in
-	   P.  This approximation introduces an error as large as a
-	   factor of 2, but the algorithm seems to handle it OK.
-
-	   Come to think of it a divide may not be a big deal on a
-	   modern DSP, so its probably worth checking out the cycles
-	   for a divide versus a top_bit() implementation.
-	*/
-
-	P = MIN_TX_POWER_FOR_ADAPTION + ec->Pstates;
-	logP = top_bit(P) + ec->log2taps;
-	shift = 30 - 2 - logP;
-	ec->shift = shift;
-
-	lms_adapt_bg(ec, clean_bg, shift);
-    }
-
-    /* very simple DTD to make sure we dont try and adapt with strong
-       near end speech */
-
-    ec->adapt = 0;
-    if ((ec->Lrx > MIN_RX_POWER_FOR_ADAPTION) && (ec->Lrx > ec->Ltx))
-	ec->nonupdate_dwell = DTD_HANGOVER;
-    if (ec->nonupdate_dwell)
-	ec->nonupdate_dwell--;
-
-    /* Transfer logic ------------------------------------------------------*/
-
-    /* These conditions are from the dual path paper [1], I messed with
-       them a bit to improve performance. */
-
-    if ((ec->adaption_mode & ECHO_CAN_USE_ADAPTION) &&
-	(ec->nonupdate_dwell == 0) &&
-	(8*ec->Lclean_bg < 7*ec->Lclean) /* (ec->Lclean_bg < 0.875*ec->Lclean) */ &&
-	(8*ec->Lclean_bg < ec->Ltx)      /* (ec->Lclean_bg < 0.125*ec->Ltx)    */ )
-    {
-	if (ec->cond_met == 6) {
-	    /* BG filter has had better results for 6 consecutive samples */
-	    ec->adapt = 1;
-	    memcpy(ec->fir_taps16[0], ec->fir_taps16[1], ec->taps*sizeof(int16_t));
+		/* hard limit filter to prevent clipping.  Note that at this stage
+		   rx should be limited to +/- 16383 due to right shift above */
+		tmp1 = ec->rx_1 >> 15;
+		if (tmp1 > 16383)
+			tmp1 = 16383;
+		if (tmp1 < -16383)
+			tmp1 = -16383;
+		rx = tmp1;
+		ec->rx_2 = tmp;
 	}
-	else
-	    ec->cond_met++;
-    }
-    else
-	ec->cond_met = 0;
 
-    /* Non-Linear Processing ---------------------------------------------------*/
+	/* Block average of power in the filter states.  Used for
+	   adaption power calculation. */
 
-    ec->clean_nlp = ec->clean;
-    if (ec->adaption_mode & ECHO_CAN_USE_NLP)
-    {
-        /* Non-linear processor - a fancy way to say "zap small signals, to avoid
-           residual echo due to (uLaw/ALaw) non-linearity in the channel.". */
-
-      if ((16*ec->Lclean < ec->Ltx))
-      {
-	/* Our e/c has improved echo by at least 24 dB (each factor of 2 is 6dB,
-	   so 2*2*2*2=16 is the same as 6+6+6+6=24dB) */
-        if (ec->adaption_mode & ECHO_CAN_USE_CNG)
 	{
-	    ec->cng_level = ec->Lbgn;
+		int new, old;
 
-	    /* Very elementary comfort noise generation.  Just random
-	       numbers rolled off very vaguely Hoth-like.  DR: This
-	       noise doesn't sound quite right to me - I suspect there
-	       are some overlfow issues in the filtering as it's too
-	       "crackly".  TODO: debug this, maybe just play noise at
-	       high level or look at spectrum.
-	    */
-
-	    ec->cng_rndnum = 1664525U*ec->cng_rndnum + 1013904223U;
-	    ec->cng_filter = ((ec->cng_rndnum & 0xFFFF) - 32768 + 5*ec->cng_filter) >> 3;
-	    ec->clean_nlp = (ec->cng_filter*ec->cng_level*8) >> 14;
-
-        }
-        else if (ec->adaption_mode & ECHO_CAN_USE_CLIP)
-	{
-	    /* This sounds much better than CNG */
-	    if (ec->clean_nlp > ec->Lbgn)
-	      ec->clean_nlp = ec->Lbgn;
-	    if (ec->clean_nlp < -ec->Lbgn)
-	      ec->clean_nlp = -ec->Lbgn;
+		/* efficient "out with the old and in with the new" algorithm so
+		   we don't have to recalculate over the whole block of
+		   samples. */
+		new = (int)tx *(int)tx;
+		old = (int)ec->fir_state.history[ec->fir_state.curr_pos] *
+		    (int)ec->fir_state.history[ec->fir_state.curr_pos];
+		ec->Pstates +=
+		    ((new - old) + (1 << ec->log2taps)) >> ec->log2taps;
+		if (ec->Pstates < 0)
+			ec->Pstates = 0;
 	}
-	else
-        {
-	  /* just mute the residual, doesn't sound very good, used mainly
-	     in G168 tests */
-          ec->clean_nlp = 0;
-        }
-      }
-      else {
-	  /* Background noise estimator.  I tried a few algorithms
-	     here without much luck.  This very simple one seems to
-	     work best, we just average the level using a slow (1 sec
-	     time const) filter if the current level is less than a
-	     (experimentally derived) constant.  This means we dont
-	     include high level signals like near end speech.  When
-	     combined with CNG or especially CLIP seems to work OK.
-	  */
-	  if (ec->Lclean < 40) {
-	      ec->Lbgn_acc += abs(ec->clean) - ec->Lbgn;
-	      ec->Lbgn = (ec->Lbgn_acc + (1<<11)) >> 12;
-	  }
-       }
-    }
 
-    /* Roll around the taps buffer */
-    if (ec->curr_pos <= 0)
-        ec->curr_pos = ec->taps;
-    ec->curr_pos--;
+	/* Calculate short term average levels using simple single pole IIRs */
 
-    if (ec->adaption_mode & ECHO_CAN_DISABLE)
-      ec->clean_nlp = rx;
+	ec->Ltxacc += abs(tx) - ec->Ltx;
+	ec->Ltx = (ec->Ltxacc + (1 << 4)) >> 5;
+	ec->Lrxacc += abs(rx) - ec->Lrx;
+	ec->Lrx = (ec->Lrxacc + (1 << 4)) >> 5;
 
-    /* Output scaled back up again to match input scaling */
+	/* Foreground filter --------------------------------------------------- */
 
-    return (int16_t) ec->clean_nlp << 1;
+	ec->fir_state.coeffs = ec->fir_taps16[0];
+	echo_value = fir16(&ec->fir_state, tx);
+	ec->clean = rx - echo_value;
+	ec->Lcleanacc += abs(ec->clean) - ec->Lclean;
+	ec->Lclean = (ec->Lcleanacc + (1 << 4)) >> 5;
+
+	/* Background filter --------------------------------------------------- */
+
+	echo_value = fir16(&ec->fir_state_bg, tx);
+	clean_bg = rx - echo_value;
+	ec->Lclean_bgacc += abs(clean_bg) - ec->Lclean_bg;
+	ec->Lclean_bg = (ec->Lclean_bgacc + (1 << 4)) >> 5;
+
+	/* Background Filter adaption ----------------------------------------- */
+
+	/* Almost always adap bg filter, just simple DT and energy
+	   detection to minimise adaption in cases of strong double talk.
+	   However this is not critical for the dual path algorithm.
+	 */
+	ec->factor = 0;
+	ec->shift = 0;
+	if ((ec->nonupdate_dwell == 0)) {
+		int P, logP, shift;
+
+		/* Determine:
+
+		   f = Beta * clean_bg_rx/P ------ (1)
+
+		   where P is the total power in the filter states.
+
+		   The Boffins have shown that if we obey (1) we converge
+		   quickly and avoid instability.
+
+		   The correct factor f must be in Q30, as this is the fixed
+		   point format required by the lms_adapt_bg() function,
+		   therefore the scaled version of (1) is:
+
+		   (2^30) * f  = (2^30) * Beta * clean_bg_rx/P
+		   factor  = (2^30) * Beta * clean_bg_rx/P         ----- (2)
+
+		   We have chosen Beta = 0.25 by experiment, so:
+
+		   factor  = (2^30) * (2^-2) * clean_bg_rx/P
+
+		   (30 - 2 - log2(P))
+		   factor  = clean_bg_rx 2                         ----- (3)
+
+		   To avoid a divide we approximate log2(P) as top_bit(P),
+		   which returns the position of the highest non-zero bit in
+		   P.  This approximation introduces an error as large as a
+		   factor of 2, but the algorithm seems to handle it OK.
+
+		   Come to think of it a divide may not be a big deal on a
+		   modern DSP, so its probably worth checking out the cycles
+		   for a divide versus a top_bit() implementation.
+		 */
+
+		P = MIN_TX_POWER_FOR_ADAPTION + ec->Pstates;
+		logP = top_bit(P) + ec->log2taps;
+		shift = 30 - 2 - logP;
+		ec->shift = shift;
+
+		lms_adapt_bg(ec, clean_bg, shift);
+	}
+
+	/* very simple DTD to make sure we dont try and adapt with strong
+	   near end speech */
+
+	ec->adapt = 0;
+	if ((ec->Lrx > MIN_RX_POWER_FOR_ADAPTION) && (ec->Lrx > ec->Ltx))
+		ec->nonupdate_dwell = DTD_HANGOVER;
+	if (ec->nonupdate_dwell)
+		ec->nonupdate_dwell--;
+
+	/* Transfer logic ------------------------------------------------------ */
+
+	/* These conditions are from the dual path paper [1], I messed with
+	   them a bit to improve performance. */
+
+	if ((ec->adaption_mode & ECHO_CAN_USE_ADAPTION) &&
+	    (ec->nonupdate_dwell == 0) &&
+	    (8 * ec->Lclean_bg <
+	     7 * ec->Lclean) /* (ec->Lclean_bg < 0.875*ec->Lclean) */ &&
+	    (8 * ec->Lclean_bg <
+	     ec->Ltx) /* (ec->Lclean_bg < 0.125*ec->Ltx)    */ ) {
+		if (ec->cond_met == 6) {
+			/* BG filter has had better results for 6 consecutive samples */
+			ec->adapt = 1;
+			memcpy(ec->fir_taps16[0], ec->fir_taps16[1],
+			       ec->taps * sizeof(int16_t));
+		} else
+			ec->cond_met++;
+	} else
+		ec->cond_met = 0;
+
+	/* Non-Linear Processing --------------------------------------------------- */
+
+	ec->clean_nlp = ec->clean;
+	if (ec->adaption_mode & ECHO_CAN_USE_NLP) {
+		/* Non-linear processor - a fancy way to say "zap small signals, to avoid
+		   residual echo due to (uLaw/ALaw) non-linearity in the channel.". */
+
+		if ((16 * ec->Lclean < ec->Ltx)) {
+			/* Our e/c has improved echo by at least 24 dB (each factor of 2 is 6dB,
+			   so 2*2*2*2=16 is the same as 6+6+6+6=24dB) */
+			if (ec->adaption_mode & ECHO_CAN_USE_CNG) {
+				ec->cng_level = ec->Lbgn;
+
+				/* Very elementary comfort noise generation.  Just random
+				   numbers rolled off very vaguely Hoth-like.  DR: This
+				   noise doesn't sound quite right to me - I suspect there
+				   are some overlfow issues in the filtering as it's too
+				   "crackly".  TODO: debug this, maybe just play noise at
+				   high level or look at spectrum.
+				 */
+
+				ec->cng_rndnum =
+				    1664525U * ec->cng_rndnum + 1013904223U;
+				ec->cng_filter =
+				    ((ec->cng_rndnum & 0xFFFF) - 32768 +
+				     5 * ec->cng_filter) >> 3;
+				ec->clean_nlp =
+				    (ec->cng_filter * ec->cng_level * 8) >> 14;
+
+			} else if (ec->adaption_mode & ECHO_CAN_USE_CLIP) {
+				/* This sounds much better than CNG */
+				if (ec->clean_nlp > ec->Lbgn)
+					ec->clean_nlp = ec->Lbgn;
+				if (ec->clean_nlp < -ec->Lbgn)
+					ec->clean_nlp = -ec->Lbgn;
+			} else {
+				/* just mute the residual, doesn't sound very good, used mainly
+				   in G168 tests */
+				ec->clean_nlp = 0;
+			}
+		} else {
+			/* Background noise estimator.  I tried a few algorithms
+			   here without much luck.  This very simple one seems to
+			   work best, we just average the level using a slow (1 sec
+			   time const) filter if the current level is less than a
+			   (experimentally derived) constant.  This means we dont
+			   include high level signals like near end speech.  When
+			   combined with CNG or especially CLIP seems to work OK.
+			 */
+			if (ec->Lclean < 40) {
+				ec->Lbgn_acc += abs(ec->clean) - ec->Lbgn;
+				ec->Lbgn = (ec->Lbgn_acc + (1 << 11)) >> 12;
+			}
+		}
+	}
+
+	/* Roll around the taps buffer */
+	if (ec->curr_pos <= 0)
+		ec->curr_pos = ec->taps;
+	ec->curr_pos--;
+
+	if (ec->adaption_mode & ECHO_CAN_DISABLE)
+		ec->clean_nlp = rx;
+
+	/* Output scaled back up again to match input scaling */
+
+	return (int16_t) ec->clean_nlp << 1;
 }
 
-/*- End of function --------------------------------------------------------*/
+EXPORT_SYMBOL_GPL(oslec_update);
 
 /* This function is seperated from the echo canceller is it is usually called
    as part of the tx process.  See rx HP (DC blocking) filter above, it's
@@ -608,25 +605,35 @@
    precision, which noise shapes things, giving very clean DC removal.
 */
 
-int16_t echo_can_hpf_tx(echo_can_state_t *ec, int16_t tx) {
-    int tmp, tmp1;
+int16_t oslec_hpf_tx(struct oslec_state * ec, int16_t tx)
+{
+	int tmp, tmp1;
 
-    if (ec->adaption_mode & ECHO_CAN_USE_TX_HPF) {
-        tmp = tx << 15;
+	if (ec->adaption_mode & ECHO_CAN_USE_TX_HPF) {
+		tmp = tx << 15;
 #if 1
-        /* Make sure the gain of the HPF is 1.0. The first can still saturate a little under
-           impulse conditions, and it might roll to 32768 and need clipping on sustained peak
-           level signals. However, the scale of such clipping is small, and the error due to
-           any saturation should not markedly affect the downstream processing. */
-        tmp -= (tmp >> 4);
+		/* Make sure the gain of the HPF is 1.0. The first can still saturate a little under
+		   impulse conditions, and it might roll to 32768 and need clipping on sustained peak
+		   level signals. However, the scale of such clipping is small, and the error due to
+		   any saturation should not markedly affect the downstream processing. */
+		tmp -= (tmp >> 4);
 #endif
-        ec->tx_1 += -(ec->tx_1>>DC_LOG2BETA) + tmp - ec->tx_2;
-        tmp1 = ec->tx_1 >> 15;
-	if (tmp1 > 32767) tmp1 = 32767;
-	if (tmp1 < -32767) tmp1 = -32767;
-	tx = tmp1;
-        ec->tx_2 = tmp;
-    }
+		ec->tx_1 += -(ec->tx_1 >> DC_LOG2BETA) + tmp - ec->tx_2;
+		tmp1 = ec->tx_1 >> 15;
+		if (tmp1 > 32767)
+			tmp1 = 32767;
+		if (tmp1 < -32767)
+			tmp1 = -32767;
+		tx = tmp1;
+		ec->tx_2 = tmp;
+	}
 
-    return tx;
+	return tx;
 }
+
+EXPORT_SYMBOL_GPL(oslec_hpf_tx);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Rowe");
+MODULE_DESCRIPTION("Open Source Line Echo Canceller");
+MODULE_VERSION("0.3.0");
diff --git a/drivers/staging/echo/echo.h b/drivers/staging/echo/echo.h
index 7a91b439..9fb9543 100644
--- a/drivers/staging/echo/echo.h
+++ b/drivers/staging/echo/echo.h
@@ -118,23 +118,14 @@
 */
 
 #include "fir.h"
-
-/* Mask bits for the adaption mode */
-#define ECHO_CAN_USE_ADAPTION	0x01
-#define ECHO_CAN_USE_NLP	0x02
-#define ECHO_CAN_USE_CNG	0x04
-#define ECHO_CAN_USE_CLIP	0x08
-#define ECHO_CAN_USE_TX_HPF	0x10
-#define ECHO_CAN_USE_RX_HPF	0x20
-#define ECHO_CAN_DISABLE	0x40
+#include "oslec.h"
 
 /*!
     G.168 echo canceller descriptor. This defines the working state for a line
     echo canceller.
 */
-typedef struct
-{
-	int16_t tx,rx;
+struct oslec_state {
+	int16_t tx, rx;
 	int16_t clean;
 	int16_t clean_nlp;
 
@@ -176,45 +167,6 @@
 
 	/* snapshot sample of coeffs used for development */
 	int16_t *snapshot;
-} echo_can_state_t;
+};
 
-/*! Create a voice echo canceller context.
-    \param len The length of the canceller, in samples.
-    \return The new canceller context, or NULL if the canceller could not be created.
-*/
-echo_can_state_t *echo_can_create(int len, int adaption_mode);
-
-/*! Free a voice echo canceller context.
-    \param ec The echo canceller context.
-*/
-void echo_can_free(echo_can_state_t *ec);
-
-/*! Flush (reinitialise) a voice echo canceller context.
-    \param ec The echo canceller context.
-*/
-void echo_can_flush(echo_can_state_t *ec);
-
-/*! Set the adaption mode of a voice echo canceller context.
-    \param ec The echo canceller context.
-    \param adapt The mode.
-*/
-void echo_can_adaption_mode(echo_can_state_t *ec, int adaption_mode);
-
-void echo_can_snapshot(echo_can_state_t *ec);
-
-/*! Process a sample through a voice echo canceller.
-    \param ec The echo canceller context.
-    \param tx The transmitted audio sample.
-    \param rx The received audio sample.
-    \return The clean (echo cancelled) received sample.
-*/
-int16_t echo_can_update(echo_can_state_t *ec, int16_t tx, int16_t rx);
-
-/*! Process to high pass filter the tx signal.
-    \param ec The echo canceller context.
-    \param tx The transmitted auio sample.
-    \return The HP filtered transmit sample, send this to your D/A.
-*/
-int16_t echo_can_hpf_tx(echo_can_state_t *ec, int16_t tx);
-
-#endif	/* __ECHO_H */
+#endif /* __ECHO_H */
diff --git a/drivers/staging/echo/fir.h b/drivers/staging/echo/fir.h
index e1bfc49..5645cb1 100644
--- a/drivers/staging/echo/fir.h
+++ b/drivers/staging/echo/fir.h
@@ -72,8 +72,7 @@
     16 bit integer FIR descriptor. This defines the working state for a single
     instance of an FIR filter using 16 bit integer coefficients.
 */
-typedef struct
-{
+typedef struct {
 	int taps;
 	int curr_pos;
 	const int16_t *coeffs;
@@ -85,8 +84,7 @@
     instance of an FIR filter using 32 bit integer coefficients, and filtering
     16 bit integer data.
 */
-typedef struct
-{
+typedef struct {
 	int taps;
 	int curr_pos;
 	const int32_t *coeffs;
@@ -97,273 +95,201 @@
     Floating point FIR descriptor. This defines the working state for a single
     instance of an FIR filter using floating point coefficients and data.
 */
-typedef struct
-{
+typedef struct {
 	int taps;
 	int curr_pos;
 	const float *coeffs;
 	float *history;
 } fir_float_state_t;
 
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-static __inline__ const int16_t *fir16_create(fir16_state_t *fir,
-                                              const int16_t *coeffs,
-                                              int taps)
+static __inline__ const int16_t *fir16_create(fir16_state_t * fir,
+					      const int16_t * coeffs, int taps)
 {
 	fir->taps = taps;
 	fir->curr_pos = taps - 1;
 	fir->coeffs = coeffs;
-#if defined(USE_MMX)  ||  defined(USE_SSE2) || defined(__BLACKFIN_ASM__)
-	if ((fir->history = malloc(2*taps*sizeof(int16_t))))
-		memset(fir->history, 0, 2*taps*sizeof(int16_t));
+#if defined(USE_MMX)  ||  defined(USE_SSE2) || defined(__bfin__)
+	fir->history = kcalloc(2 * taps, sizeof(int16_t), GFP_KERNEL);
 #else
-	if ((fir->history = (int16_t *) malloc(taps*sizeof(int16_t))))
-		memset(fir->history, 0, taps*sizeof(int16_t));
+	fir->history = kcalloc(taps, sizeof(int16_t), GFP_KERNEL);
 #endif
 	return fir->history;
 }
-/*- End of function --------------------------------------------------------*/
 
-static __inline__ void fir16_flush(fir16_state_t *fir)
+static __inline__ void fir16_flush(fir16_state_t * fir)
 {
-#if defined(USE_MMX)  ||  defined(USE_SSE2) || defined(__BLACKFIN_ASM__)
-    memset(fir->history, 0, 2*fir->taps*sizeof(int16_t));
+#if defined(USE_MMX)  ||  defined(USE_SSE2) || defined(__bfin__)
+	memset(fir->history, 0, 2 * fir->taps * sizeof(int16_t));
 #else
-    memset(fir->history, 0, fir->taps*sizeof(int16_t));
+	memset(fir->history, 0, fir->taps * sizeof(int16_t));
 #endif
 }
-/*- End of function --------------------------------------------------------*/
 
-static __inline__ void fir16_free(fir16_state_t *fir)
+static __inline__ void fir16_free(fir16_state_t * fir)
 {
-	free(fir->history);
+	kfree(fir->history);
 }
-/*- End of function --------------------------------------------------------*/
 
-#ifdef __BLACKFIN_ASM__
+#ifdef __bfin__
 static inline int32_t dot_asm(short *x, short *y, int len)
 {
-   int dot;
+	int dot;
 
-   len--;
+	len--;
 
-   __asm__
-   (
-   "I0 = %1;\n\t"
-   "I1 = %2;\n\t"
-   "A0 = 0;\n\t"
-   "R0.L = W[I0++] || R1.L = W[I1++];\n\t"
-   "LOOP dot%= LC0 = %3;\n\t"
-   "LOOP_BEGIN dot%=;\n\t"
-      "A0 += R0.L * R1.L (IS) || R0.L = W[I0++] || R1.L = W[I1++];\n\t"
-   "LOOP_END dot%=;\n\t"
-   "A0 += R0.L*R1.L (IS);\n\t"
-   "R0 = A0;\n\t"
-   "%0 = R0;\n\t"
-   : "=&d" (dot)
-   : "a" (x), "a" (y), "a" (len)
-   : "I0", "I1", "A1", "A0", "R0", "R1"
-   );
+	__asm__("I0 = %1;\n\t"
+		"I1 = %2;\n\t"
+		"A0 = 0;\n\t"
+		"R0.L = W[I0++] || R1.L = W[I1++];\n\t"
+		"LOOP dot%= LC0 = %3;\n\t"
+		"LOOP_BEGIN dot%=;\n\t"
+		"A0 += R0.L * R1.L (IS) || R0.L = W[I0++] || R1.L = W[I1++];\n\t"
+		"LOOP_END dot%=;\n\t"
+		"A0 += R0.L*R1.L (IS);\n\t"
+		"R0 = A0;\n\t"
+		"%0 = R0;\n\t"
+		:"=&d"(dot)
+		:"a"(x), "a"(y), "a"(len)
+		:"I0", "I1", "A1", "A0", "R0", "R1"
+	);
 
-   return dot;
+	return dot;
 }
 #endif
-/*- End of function --------------------------------------------------------*/
 
-static __inline__ int16_t fir16(fir16_state_t *fir, int16_t sample)
+static __inline__ int16_t fir16(fir16_state_t * fir, int16_t sample)
 {
-    int32_t y;
+	int32_t y;
 #if defined(USE_MMX)
-    int i;
-    mmx_t *mmx_coeffs;
-    mmx_t *mmx_hist;
+	int i;
+	mmx_t *mmx_coeffs;
+	mmx_t *mmx_hist;
 
-    fir->history[fir->curr_pos] = sample;
-    fir->history[fir->curr_pos + fir->taps] = sample;
+	fir->history[fir->curr_pos] = sample;
+	fir->history[fir->curr_pos + fir->taps] = sample;
 
-    mmx_coeffs = (mmx_t *) fir->coeffs;
-    mmx_hist = (mmx_t *) &fir->history[fir->curr_pos];
-    i = fir->taps;
-    pxor_r2r(mm4, mm4);
-    /* 8 samples per iteration, so the filter must be a multiple of 8 long. */
-    while (i > 0)
-    {
-        movq_m2r(mmx_coeffs[0], mm0);
-        movq_m2r(mmx_coeffs[1], mm2);
-        movq_m2r(mmx_hist[0], mm1);
-        movq_m2r(mmx_hist[1], mm3);
-        mmx_coeffs += 2;
-        mmx_hist += 2;
-        pmaddwd_r2r(mm1, mm0);
-        pmaddwd_r2r(mm3, mm2);
-        paddd_r2r(mm0, mm4);
-        paddd_r2r(mm2, mm4);
-        i -= 8;
-    }
-    movq_r2r(mm4, mm0);
-    psrlq_i2r(32, mm0);
-    paddd_r2r(mm0, mm4);
-    movd_r2m(mm4, y);
-    emms();
+	mmx_coeffs = (mmx_t *) fir->coeffs;
+	mmx_hist = (mmx_t *) & fir->history[fir->curr_pos];
+	i = fir->taps;
+	pxor_r2r(mm4, mm4);
+	/* 8 samples per iteration, so the filter must be a multiple of 8 long. */
+	while (i > 0) {
+		movq_m2r(mmx_coeffs[0], mm0);
+		movq_m2r(mmx_coeffs[1], mm2);
+		movq_m2r(mmx_hist[0], mm1);
+		movq_m2r(mmx_hist[1], mm3);
+		mmx_coeffs += 2;
+		mmx_hist += 2;
+		pmaddwd_r2r(mm1, mm0);
+		pmaddwd_r2r(mm3, mm2);
+		paddd_r2r(mm0, mm4);
+		paddd_r2r(mm2, mm4);
+		i -= 8;
+	}
+	movq_r2r(mm4, mm0);
+	psrlq_i2r(32, mm0);
+	paddd_r2r(mm0, mm4);
+	movd_r2m(mm4, y);
+	emms();
 #elif defined(USE_SSE2)
-    int i;
-    xmm_t *xmm_coeffs;
-    xmm_t *xmm_hist;
+	int i;
+	xmm_t *xmm_coeffs;
+	xmm_t *xmm_hist;
 
-    fir->history[fir->curr_pos] = sample;
-    fir->history[fir->curr_pos + fir->taps] = sample;
+	fir->history[fir->curr_pos] = sample;
+	fir->history[fir->curr_pos + fir->taps] = sample;
 
-    xmm_coeffs = (xmm_t *) fir->coeffs;
-    xmm_hist = (xmm_t *) &fir->history[fir->curr_pos];
-    i = fir->taps;
-    pxor_r2r(xmm4, xmm4);
-    /* 16 samples per iteration, so the filter must be a multiple of 16 long. */
-    while (i > 0)
-    {
-        movdqu_m2r(xmm_coeffs[0], xmm0);
-        movdqu_m2r(xmm_coeffs[1], xmm2);
-        movdqu_m2r(xmm_hist[0], xmm1);
-        movdqu_m2r(xmm_hist[1], xmm3);
-        xmm_coeffs += 2;
-        xmm_hist += 2;
-        pmaddwd_r2r(xmm1, xmm0);
-        pmaddwd_r2r(xmm3, xmm2);
-        paddd_r2r(xmm0, xmm4);
-        paddd_r2r(xmm2, xmm4);
-        i -= 16;
-    }
-    movdqa_r2r(xmm4, xmm0);
-    psrldq_i2r(8, xmm0);
-    paddd_r2r(xmm0, xmm4);
-    movdqa_r2r(xmm4, xmm0);
-    psrldq_i2r(4, xmm0);
-    paddd_r2r(xmm0, xmm4);
-    movd_r2m(xmm4, y);
-#elif defined(__BLACKFIN_ASM__)
-    fir->history[fir->curr_pos] = sample;
-    fir->history[fir->curr_pos + fir->taps] = sample;
-    y = dot_asm((int16_t*)fir->coeffs, &fir->history[fir->curr_pos], fir->taps);
+	xmm_coeffs = (xmm_t *) fir->coeffs;
+	xmm_hist = (xmm_t *) & fir->history[fir->curr_pos];
+	i = fir->taps;
+	pxor_r2r(xmm4, xmm4);
+	/* 16 samples per iteration, so the filter must be a multiple of 16 long. */
+	while (i > 0) {
+		movdqu_m2r(xmm_coeffs[0], xmm0);
+		movdqu_m2r(xmm_coeffs[1], xmm2);
+		movdqu_m2r(xmm_hist[0], xmm1);
+		movdqu_m2r(xmm_hist[1], xmm3);
+		xmm_coeffs += 2;
+		xmm_hist += 2;
+		pmaddwd_r2r(xmm1, xmm0);
+		pmaddwd_r2r(xmm3, xmm2);
+		paddd_r2r(xmm0, xmm4);
+		paddd_r2r(xmm2, xmm4);
+		i -= 16;
+	}
+	movdqa_r2r(xmm4, xmm0);
+	psrldq_i2r(8, xmm0);
+	paddd_r2r(xmm0, xmm4);
+	movdqa_r2r(xmm4, xmm0);
+	psrldq_i2r(4, xmm0);
+	paddd_r2r(xmm0, xmm4);
+	movd_r2m(xmm4, y);
+#elif defined(__bfin__)
+	fir->history[fir->curr_pos] = sample;
+	fir->history[fir->curr_pos + fir->taps] = sample;
+	y = dot_asm((int16_t *) fir->coeffs, &fir->history[fir->curr_pos],
+		    fir->taps);
 #else
-    int i;
-    int offset1;
-    int offset2;
+	int i;
+	int offset1;
+	int offset2;
 
-    fir->history[fir->curr_pos] = sample;
+	fir->history[fir->curr_pos] = sample;
 
-    offset2 = fir->curr_pos;
-    offset1 = fir->taps - offset2;
-    y = 0;
-    for (i = fir->taps - 1;  i >= offset1;  i--)
-        y += fir->coeffs[i]*fir->history[i - offset1];
-    for (  ;  i >= 0;  i--)
-        y += fir->coeffs[i]*fir->history[i + offset2];
+	offset2 = fir->curr_pos;
+	offset1 = fir->taps - offset2;
+	y = 0;
+	for (i = fir->taps - 1; i >= offset1; i--)
+		y += fir->coeffs[i] * fir->history[i - offset1];
+	for (; i >= 0; i--)
+		y += fir->coeffs[i] * fir->history[i + offset2];
 #endif
-    if (fir->curr_pos <= 0)
-    	fir->curr_pos = fir->taps;
-    fir->curr_pos--;
-    return (int16_t) (y >> 15);
+	if (fir->curr_pos <= 0)
+		fir->curr_pos = fir->taps;
+	fir->curr_pos--;
+	return (int16_t) (y >> 15);
 }
-/*- End of function --------------------------------------------------------*/
 
-static __inline__ const int16_t *fir32_create(fir32_state_t *fir,
-                                              const int32_t *coeffs,
-                                              int taps)
+static __inline__ const int16_t *fir32_create(fir32_state_t * fir,
+					      const int32_t * coeffs, int taps)
 {
-    fir->taps = taps;
-    fir->curr_pos = taps - 1;
-    fir->coeffs = coeffs;
-    fir->history = (int16_t *) malloc(taps*sizeof(int16_t));
-    if (fir->history)
-    	memset(fir->history, '\0', taps*sizeof(int16_t));
-    return fir->history;
+	fir->taps = taps;
+	fir->curr_pos = taps - 1;
+	fir->coeffs = coeffs;
+	fir->history = kcalloc(taps, sizeof(int16_t), GFP_KERNEL);
+	return fir->history;
 }
-/*- End of function --------------------------------------------------------*/
 
-static __inline__ void fir32_flush(fir32_state_t *fir)
+static __inline__ void fir32_flush(fir32_state_t * fir)
 {
-    memset(fir->history, 0, fir->taps*sizeof(int16_t));
+	memset(fir->history, 0, fir->taps * sizeof(int16_t));
 }
-/*- End of function --------------------------------------------------------*/
 
-static __inline__ void fir32_free(fir32_state_t *fir)
+static __inline__ void fir32_free(fir32_state_t * fir)
 {
-    free(fir->history);
+	kfree(fir->history);
 }
-/*- End of function --------------------------------------------------------*/
 
-static __inline__ int16_t fir32(fir32_state_t *fir, int16_t sample)
+static __inline__ int16_t fir32(fir32_state_t * fir, int16_t sample)
 {
-    int i;
-    int32_t y;
-    int offset1;
-    int offset2;
+	int i;
+	int32_t y;
+	int offset1;
+	int offset2;
 
-    fir->history[fir->curr_pos] = sample;
-    offset2 = fir->curr_pos;
-    offset1 = fir->taps - offset2;
-    y = 0;
-    for (i = fir->taps - 1;  i >= offset1;  i--)
-        y += fir->coeffs[i]*fir->history[i - offset1];
-    for (  ;  i >= 0;  i--)
-        y += fir->coeffs[i]*fir->history[i + offset2];
-    if (fir->curr_pos <= 0)
-    	fir->curr_pos = fir->taps;
-    fir->curr_pos--;
-    return (int16_t) (y >> 15);
+	fir->history[fir->curr_pos] = sample;
+	offset2 = fir->curr_pos;
+	offset1 = fir->taps - offset2;
+	y = 0;
+	for (i = fir->taps - 1; i >= offset1; i--)
+		y += fir->coeffs[i] * fir->history[i - offset1];
+	for (; i >= 0; i--)
+		y += fir->coeffs[i] * fir->history[i + offset2];
+	if (fir->curr_pos <= 0)
+		fir->curr_pos = fir->taps;
+	fir->curr_pos--;
+	return (int16_t) (y >> 15);
 }
-/*- End of function --------------------------------------------------------*/
-
-#ifndef __KERNEL__
-static __inline__ const float *fir_float_create(fir_float_state_t *fir,
-                                                const float *coeffs,
-    	    	    	                        int taps)
-{
-    fir->taps = taps;
-    fir->curr_pos = taps - 1;
-    fir->coeffs = coeffs;
-    fir->history = (float *) malloc(taps*sizeof(float));
-    if (fir->history)
-        memset(fir->history, '\0', taps*sizeof(float));
-    return fir->history;
-}
-/*- End of function --------------------------------------------------------*/
-
-static __inline__ void fir_float_free(fir_float_state_t *fir)
-{
-    free(fir->history);
-}
-/*- End of function --------------------------------------------------------*/
-
-static __inline__ int16_t fir_float(fir_float_state_t *fir, int16_t sample)
-{
-    int i;
-    float y;
-    int offset1;
-    int offset2;
-
-    fir->history[fir->curr_pos] = sample;
-
-    offset2 = fir->curr_pos;
-    offset1 = fir->taps - offset2;
-    y = 0;
-    for (i = fir->taps - 1;  i >= offset1;  i--)
-        y += fir->coeffs[i]*fir->history[i - offset1];
-    for (  ;  i >= 0;  i--)
-        y += fir->coeffs[i]*fir->history[i + offset2];
-    if (fir->curr_pos <= 0)
-    	fir->curr_pos = fir->taps;
-    fir->curr_pos--;
-    return  (int16_t) y;
-}
-/*- End of function --------------------------------------------------------*/
-#endif
-
-#ifdef __cplusplus
-}
-#endif
 
 #endif
 /*- End of file ------------------------------------------------------------*/
diff --git a/drivers/staging/echo/mmx.h b/drivers/staging/echo/mmx.h
index b5a3964..35412ef 100644
--- a/drivers/staging/echo/mmx.h
+++ b/drivers/staging/echo/mmx.h
@@ -27,24 +27,23 @@
  * values by ULL, lest they be truncated by the compiler)
  */
 
-typedef        union {
-        long long               q;      /* Quadword (64-bit) value */
-        unsigned long long      uq;     /* Unsigned Quadword */
-        int                     d[2];   /* 2 Doubleword (32-bit) values */
-        unsigned int            ud[2];  /* 2 Unsigned Doubleword */
-        short                   w[4];   /* 4 Word (16-bit) values */
-        unsigned short          uw[4];  /* 4 Unsigned Word */
-        char                    b[8];   /* 8 Byte (8-bit) values */
-        unsigned char           ub[8];  /* 8 Unsigned Byte */
-        float                   s[2];   /* Single-precision (32-bit) value */
-} mmx_t;        /* On an 8-byte (64-bit) boundary */
+typedef union {
+	long long q;		/* Quadword (64-bit) value */
+	unsigned long long uq;	/* Unsigned Quadword */
+	int d[2];		/* 2 Doubleword (32-bit) values */
+	unsigned int ud[2];	/* 2 Unsigned Doubleword */
+	short w[4];		/* 4 Word (16-bit) values */
+	unsigned short uw[4];	/* 4 Unsigned Word */
+	char b[8];		/* 8 Byte (8-bit) values */
+	unsigned char ub[8];	/* 8 Unsigned Byte */
+	float s[2];		/* Single-precision (32-bit) value */
+} mmx_t;			/* On an 8-byte (64-bit) boundary */
 
 /* SSE registers */
 typedef union {
 	char b[16];
 } xmm_t;
 
-
 #define         mmx_i2r(op,imm,reg) \
         __asm__ __volatile__ (#op " %0, %%" #reg \
                               : /* nothing */ \
@@ -63,7 +62,6 @@
 #define         mmx_r2r(op,regs,regd) \
         __asm__ __volatile__ (#op " %" #regs ", %" #regd)
 
-
 #define         emms() __asm__ __volatile__ ("emms")
 
 #define         movd_m2r(var,reg)           mmx_m2r (movd, var, reg)
@@ -192,16 +190,13 @@
 #define         pxor_m2r(var,reg)           mmx_m2r (pxor, var, reg)
 #define         pxor_r2r(regs,regd)         mmx_r2r (pxor, regs, regd)
 
-
 /* 3DNOW extensions */
 
 #define         pavgusb_m2r(var,reg)        mmx_m2r (pavgusb, var, reg)
 #define         pavgusb_r2r(regs,regd)      mmx_r2r (pavgusb, regs, regd)
 
-
 /* AMD MMX extensions - also available in intel SSE */
 
-
 #define         mmx_m2ri(op,mem,reg,imm) \
         __asm__ __volatile__ (#op " %1, %0, %%" #reg \
                               : /* nothing */ \
@@ -216,7 +211,6 @@
                               : /* nothing */ \
                               : "m" (mem))
 
-
 #define         maskmovq(regs,maskreg)      mmx_r2ri (maskmovq, regs, maskreg)
 
 #define         movntq_r2m(mmreg,var)       mmx_r2m (movntq, mmreg, var)
@@ -284,5 +278,4 @@
 #define         punpcklqdq_r2r(regs,regd)   mmx_r2r (punpcklqdq, regs, regd)
 #define         punpckhqdq_r2r(regs,regd)   mmx_r2r (punpckhqdq, regs, regd)
 
-
 #endif /* AVCODEC_I386MMX_H */
diff --git a/drivers/staging/echo/oslec.h b/drivers/staging/echo/oslec.h
new file mode 100644
index 0000000..bad8523
--- /dev/null
+++ b/drivers/staging/echo/oslec.h
@@ -0,0 +1,86 @@
+/*
+ *  OSLEC - A line echo canceller.  This code is being developed
+ *          against and partially complies with G168. Using code from SpanDSP
+ *
+ * Written by Steve Underwood <steveu@coppice.org>
+ *         and David Rowe <david_at_rowetel_dot_com>
+ *
+ * Copyright (C) 2001 Steve Underwood and 2007-2008 David Rowe
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __OSLEC_H
+#define __OSLEC_H
+
+/* TODO: document interface */
+
+/* Mask bits for the adaption mode */
+#define ECHO_CAN_USE_ADAPTION	0x01
+#define ECHO_CAN_USE_NLP	0x02
+#define ECHO_CAN_USE_CNG	0x04
+#define ECHO_CAN_USE_CLIP	0x08
+#define ECHO_CAN_USE_TX_HPF	0x10
+#define ECHO_CAN_USE_RX_HPF	0x20
+#define ECHO_CAN_DISABLE	0x40
+
+/*!
+    G.168 echo canceller descriptor. This defines the working state for a line
+    echo canceller.
+*/
+struct oslec_state;
+
+/*! Create a voice echo canceller context.
+    \param len The length of the canceller, in samples.
+    \return The new canceller context, or NULL if the canceller could not be created.
+*/
+struct oslec_state *oslec_create(int len, int adaption_mode);
+
+/*! Free a voice echo canceller context.
+    \param ec The echo canceller context.
+*/
+void oslec_free(struct oslec_state *ec);
+
+/*! Flush (reinitialise) a voice echo canceller context.
+    \param ec The echo canceller context.
+*/
+void oslec_flush(struct oslec_state *ec);
+
+/*! Set the adaption mode of a voice echo canceller context.
+    \param ec The echo canceller context.
+    \param adapt The mode.
+*/
+void oslec_adaption_mode(struct oslec_state *ec, int adaption_mode);
+
+void oslec_snapshot(struct oslec_state *ec);
+
+/*! Process a sample through a voice echo canceller.
+    \param ec The echo canceller context.
+    \param tx The transmitted audio sample.
+    \param rx The received audio sample.
+    \return The clean (echo cancelled) received sample.
+*/
+int16_t oslec_update(struct oslec_state *ec, int16_t tx, int16_t rx);
+
+/*! Process to high pass filter the tx signal.
+    \param ec The echo canceller context.
+    \param tx The transmitted auio sample.
+    \return The HP filtered transmit sample, send this to your D/A.
+*/
+int16_t oslec_hpf_tx(struct oslec_state *ec, int16_t tx);
+
+#endif /* __OSLEC_H */
diff --git a/drivers/staging/et131x/et1310_phy.c b/drivers/staging/et131x/et1310_phy.c
index 6c4fa54..9dd6dfd 100644
--- a/drivers/staging/et131x/et1310_phy.c
+++ b/drivers/staging/et131x/et1310_phy.c
@@ -84,7 +84,6 @@
 #include <linux/if_arp.h>
 #include <linux/ioport.h>
 #include <linux/random.h>
-#include <linux/delay.h>
 
 #include "et1310_phy.h"
 #include "et1310_pm.h"
@@ -95,7 +94,6 @@
 #include "et131x_initpci.h"
 
 #include "et1310_address_map.h"
-#include "et1310_jagcore.h"
 #include "et1310_tx.h"
 #include "et1310_rx.h"
 #include "et1310_mac.h"
diff --git a/drivers/staging/et131x/et131x_debug.c b/drivers/staging/et131x/et131x_debug.c
index 9ee5bce..d1dd46e 100644
--- a/drivers/staging/et131x/et131x_debug.c
+++ b/drivers/staging/et131x/et131x_debug.c
@@ -97,7 +97,6 @@
 #include "et131x_isr.h"
 
 #include "et1310_address_map.h"
-#include "et1310_jagcore.h"
 #include "et1310_tx.h"
 #include "et1310_rx.h"
 #include "et1310_mac.h"
diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c
index 4c6f171..a18c499 100644
--- a/drivers/staging/et131x/et131x_initpci.c
+++ b/drivers/staging/et131x/et131x_initpci.c
@@ -97,7 +97,6 @@
 #include "et131x_isr.h"
 
 #include "et1310_address_map.h"
-#include "et1310_jagcore.h"
 #include "et1310_tx.h"
 #include "et1310_rx.h"
 #include "et1310_mac.h"
diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/go7007/go7007-driver.c
index 81ae4b0..e4ead96 100644
--- a/drivers/staging/go7007/go7007-driver.c
+++ b/drivers/staging/go7007/go7007-driver.c
@@ -16,7 +16,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
diff --git a/drivers/staging/go7007/go7007-fw.c b/drivers/staging/go7007/go7007-fw.c
index c2aea10..a0e17b0 100644
--- a/drivers/staging/go7007/go7007-fw.c
+++ b/drivers/staging/go7007/go7007-fw.c
@@ -26,7 +26,6 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/time.h>
 #include <linux/mm.h>
 #include <linux/device.h>
diff --git a/drivers/staging/go7007/go7007-i2c.c b/drivers/staging/go7007/go7007-i2c.c
index 10baae3..cd55b76 100644
--- a/drivers/staging/go7007/go7007-i2c.c
+++ b/drivers/staging/go7007/go7007-i2c.c
@@ -15,7 +15,6 @@
  * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/delay.h>
diff --git a/drivers/staging/go7007/go7007-usb.c b/drivers/staging/go7007/go7007-usb.c
index d4ed6d2..3f5ee34 100644
--- a/drivers/staging/go7007/go7007-usb.c
+++ b/drivers/staging/go7007/go7007-usb.c
@@ -16,7 +16,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/wait.h>
diff --git a/drivers/staging/go7007/snd-go7007.c b/drivers/staging/go7007/snd-go7007.c
index 382740c..a7de401 100644
--- a/drivers/staging/go7007/snd-go7007.c
+++ b/drivers/staging/go7007/snd-go7007.c
@@ -17,7 +17,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
diff --git a/drivers/staging/go7007/wis-ov7640.c b/drivers/staging/go7007/wis-ov7640.c
index f5f11e9..2f9efca 100644
--- a/drivers/staging/go7007/wis-ov7640.c
+++ b/drivers/staging/go7007/wis-ov7640.c
@@ -17,7 +17,6 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
 
diff --git a/drivers/staging/go7007/wis-saa7113.c b/drivers/staging/go7007/wis-saa7113.c
index c1aff1b..1168972 100644
--- a/drivers/staging/go7007/wis-saa7113.c
+++ b/drivers/staging/go7007/wis-saa7113.c
@@ -17,7 +17,6 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
 #include <linux/ioctl.h>
diff --git a/drivers/staging/go7007/wis-saa7115.c b/drivers/staging/go7007/wis-saa7115.c
index 5c94c88..59417a7 100644
--- a/drivers/staging/go7007/wis-saa7115.c
+++ b/drivers/staging/go7007/wis-saa7115.c
@@ -17,7 +17,6 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
 #include <linux/ioctl.h>
diff --git a/drivers/staging/go7007/wis-sony-tuner.c b/drivers/staging/go7007/wis-sony-tuner.c
index 5997fb4..5a91ee4 100644
--- a/drivers/staging/go7007/wis-sony-tuner.c
+++ b/drivers/staging/go7007/wis-sony-tuner.c
@@ -17,7 +17,6 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
 #include <media/tuner.h>
diff --git a/drivers/staging/go7007/wis-tw2804.c b/drivers/staging/go7007/wis-tw2804.c
index 27fe4d0..57b8f2b 100644
--- a/drivers/staging/go7007/wis-tw2804.c
+++ b/drivers/staging/go7007/wis-tw2804.c
@@ -17,7 +17,6 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
 #include <linux/ioctl.h>
diff --git a/drivers/staging/go7007/wis-tw9903.c b/drivers/staging/go7007/wis-tw9903.c
index d8e4196..40627b2 100644
--- a/drivers/staging/go7007/wis-tw9903.c
+++ b/drivers/staging/go7007/wis-tw9903.c
@@ -17,7 +17,6 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
 #include <linux/ioctl.h>
diff --git a/drivers/staging/go7007/wis-uda1342.c b/drivers/staging/go7007/wis-uda1342.c
index a0894e3..555645c 100644
--- a/drivers/staging/go7007/wis-uda1342.c
+++ b/drivers/staging/go7007/wis-uda1342.c
@@ -17,7 +17,6 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
 #include <media/tvaudio.h>
diff --git a/drivers/staging/me4000/me4000.c b/drivers/staging/me4000/me4000.c
index 862dd7f..0b33773 100644
--- a/drivers/staging/me4000/me4000.c
+++ b/drivers/staging/me4000/me4000.c
@@ -25,24 +25,21 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
-#include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/unistd.h>
 #include <linux/list.h>
 #include <linux/proc_fs.h>
-
+#include <linux/types.h>
 #include <linux/poll.h>
 #include <linux/vmalloc.h>
+#include <linux/slab.h>
 #include <asm/pgtable.h>
 #include <asm/uaccess.h>
-#include <linux/types.h>
-
-#include <linux/slab.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
 
 /* Include-File for the Meilhaus ME-4000 I/O board */
 #include "me4000.h"
@@ -57,14 +54,14 @@
 MODULE_LICENSE("GPL");
 
 /* Board specific data are kept in a global list */
-LIST_HEAD(me4000_board_info_list);
+static LIST_HEAD(me4000_board_info_list);
 
 /* Major Device Numbers. 0 means to get it automatically from the System */
-static int me4000_ao_major_driver_no = 0;
-static int me4000_ai_major_driver_no = 0;
-static int me4000_dio_major_driver_no = 0;
-static int me4000_cnt_major_driver_no = 0;
-static int me4000_ext_int_major_driver_no = 0;
+static int me4000_ao_major_driver_no;
+static int me4000_ai_major_driver_no;
+static int me4000_dio_major_driver_no;
+static int me4000_cnt_major_driver_no;
+static int me4000_ext_int_major_driver_no;
 
 /* Let the user specify a custom major driver number */
 module_param(me4000_ao_major_driver_no, int, 0);
@@ -88,36 +85,22 @@
 		 "Major driver number for external interrupt (default 0)");
 
 /*-----------------------------------------------------------------------------
-  Module stuff
-  ---------------------------------------------------------------------------*/
-int init_module(void);
-void cleanup_module(void);
-
-/*-----------------------------------------------------------------------------
   Board detection and initialization
   ---------------------------------------------------------------------------*/
 static int me4000_probe(struct pci_dev *dev, const struct pci_device_id *id);
-static int me4000_xilinx_download(me4000_info_t *);
-static int me4000_reset_board(me4000_info_t *);
+static int me4000_xilinx_download(struct me4000_info *);
+static int me4000_reset_board(struct me4000_info *);
 
 static void clear_board_info_list(void);
-static int get_registers(struct pci_dev *dev, me4000_info_t * info);
-static int init_board_info(struct pci_dev *dev, me4000_info_t * board_info);
-static int alloc_ao_contexts(me4000_info_t * info);
-static void release_ao_contexts(me4000_info_t * board_info);
-static int alloc_ai_context(me4000_info_t * info);
-static int alloc_dio_context(me4000_info_t * info);
-static int alloc_cnt_context(me4000_info_t * info);
-static int alloc_ext_int_context(me4000_info_t * info);
-
+static void release_ao_contexts(struct me4000_info *board_info);
 /*-----------------------------------------------------------------------------
   Stuff used by all device parts
   ---------------------------------------------------------------------------*/
 static int me4000_open(struct inode *, struct file *);
 static int me4000_release(struct inode *, struct file *);
 
-static int me4000_get_user_info(me4000_user_info_t *,
-				me4000_info_t * board_info);
+static int me4000_get_user_info(struct me4000_user_info *,
+				struct me4000_info *board_info);
 static int me4000_read_procmem(char *, char **, off_t, int, int *, void *);
 
 /*-----------------------------------------------------------------------------
@@ -140,40 +123,42 @@
 static unsigned int me4000_ao_poll_cont(struct file *, poll_table *);
 static int me4000_ao_fsync_cont(struct file *, struct dentry *, int);
 
-static int me4000_ao_start(unsigned long *, me4000_ao_context_t *);
-static int me4000_ao_stop(me4000_ao_context_t *);
-static int me4000_ao_immediate_stop(me4000_ao_context_t *);
-static int me4000_ao_timer_set_divisor(u32 *, me4000_ao_context_t *);
-static int me4000_ao_preload(me4000_ao_context_t *);
-static int me4000_ao_preload_update(me4000_ao_context_t *);
-static int me4000_ao_ex_trig_set_edge(int *, me4000_ao_context_t *);
-static int me4000_ao_ex_trig_enable(me4000_ao_context_t *);
-static int me4000_ao_ex_trig_disable(me4000_ao_context_t *);
-static int me4000_ao_prepare(me4000_ao_context_t * ao_info);
-static int me4000_ao_reset(me4000_ao_context_t * ao_info);
-static int me4000_ao_enable_do(me4000_ao_context_t *);
-static int me4000_ao_disable_do(me4000_ao_context_t *);
-static int me4000_ao_fsm_state(int *, me4000_ao_context_t *);
+static int me4000_ao_start(unsigned long *, struct me4000_ao_context *);
+static int me4000_ao_stop(struct me4000_ao_context *);
+static int me4000_ao_immediate_stop(struct me4000_ao_context *);
+static int me4000_ao_timer_set_divisor(u32 *, struct me4000_ao_context *);
+static int me4000_ao_preload(struct me4000_ao_context *);
+static int me4000_ao_preload_update(struct me4000_ao_context *);
+static int me4000_ao_ex_trig_set_edge(int *, struct me4000_ao_context *);
+static int me4000_ao_ex_trig_enable(struct me4000_ao_context *);
+static int me4000_ao_ex_trig_disable(struct me4000_ao_context *);
+static int me4000_ao_prepare(struct me4000_ao_context *ao_info);
+static int me4000_ao_reset(struct me4000_ao_context *ao_info);
+static int me4000_ao_enable_do(struct me4000_ao_context *);
+static int me4000_ao_disable_do(struct me4000_ao_context *);
+static int me4000_ao_fsm_state(int *, struct me4000_ao_context *);
 
-static int me4000_ao_simultaneous_ex_trig(me4000_ao_context_t * ao_context);
-static int me4000_ao_simultaneous_sw(me4000_ao_context_t * ao_context);
-static int me4000_ao_simultaneous_disable(me4000_ao_context_t * ao_context);
-static int me4000_ao_simultaneous_update(me4000_ao_channel_list_t * channels,
-					 me4000_ao_context_t * ao_context);
+static int me4000_ao_simultaneous_ex_trig(struct me4000_ao_context *ao_context);
+static int me4000_ao_simultaneous_sw(struct me4000_ao_context *ao_context);
+static int me4000_ao_simultaneous_disable(struct me4000_ao_context *ao_context);
+static int me4000_ao_simultaneous_update(
+					struct me4000_ao_channel_list *channels,
+					struct me4000_ao_context *ao_context);
 
-static int me4000_ao_synchronous_ex_trig(me4000_ao_context_t * ao_context);
-static int me4000_ao_synchronous_sw(me4000_ao_context_t * ao_context);
-static int me4000_ao_synchronous_disable(me4000_ao_context_t * ao_context);
+static int me4000_ao_synchronous_ex_trig(struct me4000_ao_context *ao_context);
+static int me4000_ao_synchronous_sw(struct me4000_ao_context *ao_context);
+static int me4000_ao_synchronous_disable(struct me4000_ao_context *ao_context);
 
 static int me4000_ao_ex_trig_timeout(unsigned long *arg,
-				     me4000_ao_context_t * ao_context);
+				     struct me4000_ao_context *ao_context);
 static int me4000_ao_get_free_buffer(unsigned long *arg,
-				     me4000_ao_context_t * ao_context);
+				     struct me4000_ao_context *ao_context);
 
 /*-----------------------------------------------------------------------------
   Analog input stuff
   ---------------------------------------------------------------------------*/
-static int me4000_ai_single(me4000_ai_single_t *, me4000_ai_context_t *);
+static int me4000_ai_single(struct me4000_ai_single *,
+				struct me4000_ai_context *);
 static int me4000_ai_ioctl_sing(struct inode *, struct file *, unsigned int,
 				unsigned long);
 
@@ -186,68 +171,69 @@
 static int me4000_ai_ioctl_ext(struct inode *, struct file *, unsigned int,
 			       unsigned long);
 
-static int me4000_ai_prepare(me4000_ai_context_t * ai_context);
-static int me4000_ai_reset(me4000_ai_context_t * ai_context);
-static int me4000_ai_config(me4000_ai_config_t *, me4000_ai_context_t *);
-static int me4000_ai_start(me4000_ai_context_t *);
-static int me4000_ai_start_ex(unsigned long *, me4000_ai_context_t *);
-static int me4000_ai_stop(me4000_ai_context_t *);
-static int me4000_ai_immediate_stop(me4000_ai_context_t *);
-static int me4000_ai_ex_trig_enable(me4000_ai_context_t *);
-static int me4000_ai_ex_trig_disable(me4000_ai_context_t *);
-static int me4000_ai_ex_trig_setup(me4000_ai_trigger_t *,
-				   me4000_ai_context_t *);
-static int me4000_ai_sc_setup(me4000_ai_sc_t * arg,
-			      me4000_ai_context_t * ai_context);
-static int me4000_ai_offset_enable(me4000_ai_context_t * ai_context);
-static int me4000_ai_offset_disable(me4000_ai_context_t * ai_context);
-static int me4000_ai_fullscale_enable(me4000_ai_context_t * ai_context);
-static int me4000_ai_fullscale_disable(me4000_ai_context_t * ai_context);
-static int me4000_ai_fsm_state(int *arg, me4000_ai_context_t * ai_context);
+static int me4000_ai_prepare(struct me4000_ai_context *ai_context);
+static int me4000_ai_reset(struct me4000_ai_context *ai_context);
+static int me4000_ai_config(struct me4000_ai_config *,
+				struct me4000_ai_context *);
+static int me4000_ai_start(struct me4000_ai_context *);
+static int me4000_ai_start_ex(unsigned long *, struct me4000_ai_context *);
+static int me4000_ai_stop(struct me4000_ai_context *);
+static int me4000_ai_immediate_stop(struct me4000_ai_context *);
+static int me4000_ai_ex_trig_enable(struct me4000_ai_context *);
+static int me4000_ai_ex_trig_disable(struct me4000_ai_context *);
+static int me4000_ai_ex_trig_setup(struct me4000_ai_trigger *,
+				   struct me4000_ai_context *);
+static int me4000_ai_sc_setup(struct me4000_ai_sc *arg,
+			      struct me4000_ai_context *ai_context);
+static int me4000_ai_offset_enable(struct me4000_ai_context *ai_context);
+static int me4000_ai_offset_disable(struct me4000_ai_context *ai_context);
+static int me4000_ai_fullscale_enable(struct me4000_ai_context *ai_context);
+static int me4000_ai_fullscale_disable(struct me4000_ai_context *ai_context);
+static int me4000_ai_fsm_state(int *arg, struct me4000_ai_context *ai_context);
 static int me4000_ai_get_count_buffer(unsigned long *arg,
-				      me4000_ai_context_t * ai_context);
+				      struct me4000_ai_context *ai_context);
 
 /*-----------------------------------------------------------------------------
   EEPROM stuff
   ---------------------------------------------------------------------------*/
-static int me4000_eeprom_read(me4000_eeprom_t * arg,
-			      me4000_ai_context_t * ai_context);
-static int me4000_eeprom_write(me4000_eeprom_t * arg,
-			       me4000_ai_context_t * ai_context);
-static unsigned short eeprom_read_cmd(me4000_ai_context_t * ai_context,
-				      unsigned long cmd, int length);
-static int eeprom_write_cmd(me4000_ai_context_t * ai_context, unsigned long cmd,
-			    int length);
+static int me4000_eeprom_read(struct me4000_eeprom *arg,
+			      struct me4000_ai_context *ai_context);
+static int me4000_eeprom_write(struct me4000_eeprom *arg,
+			       struct me4000_ai_context *ai_context);
 
 /*-----------------------------------------------------------------------------
   Digital I/O stuff
   ---------------------------------------------------------------------------*/
 static int me4000_dio_ioctl(struct inode *, struct file *, unsigned int,
 			    unsigned long);
-static int me4000_dio_config(me4000_dio_config_t *, me4000_dio_context_t *);
-static int me4000_dio_get_byte(me4000_dio_byte_t *, me4000_dio_context_t *);
-static int me4000_dio_set_byte(me4000_dio_byte_t *, me4000_dio_context_t *);
-static int me4000_dio_reset(me4000_dio_context_t *);
+static int me4000_dio_config(struct me4000_dio_config *,
+				struct me4000_dio_context *);
+static int me4000_dio_get_byte(struct me4000_dio_byte *,
+				struct me4000_dio_context *);
+static int me4000_dio_set_byte(struct me4000_dio_byte *,
+				struct me4000_dio_context *);
+static int me4000_dio_reset(struct me4000_dio_context *);
 
 /*-----------------------------------------------------------------------------
   Counter stuff
   ---------------------------------------------------------------------------*/
 static int me4000_cnt_ioctl(struct inode *, struct file *, unsigned int,
 			    unsigned long);
-static int me4000_cnt_config(me4000_cnt_config_t *, me4000_cnt_context_t *);
-static int me4000_cnt_read(me4000_cnt_t *, me4000_cnt_context_t *);
-static int me4000_cnt_write(me4000_cnt_t *, me4000_cnt_context_t *);
-static int me4000_cnt_reset(me4000_cnt_context_t *);
+static int me4000_cnt_config(struct me4000_cnt_config *,
+				struct me4000_cnt_context *);
+static int me4000_cnt_read(struct me4000_cnt *, struct me4000_cnt_context *);
+static int me4000_cnt_write(struct me4000_cnt *, struct me4000_cnt_context *);
+static int me4000_cnt_reset(struct me4000_cnt_context *);
 
 /*-----------------------------------------------------------------------------
   External interrupt routines
   ---------------------------------------------------------------------------*/
 static int me4000_ext_int_ioctl(struct inode *, struct file *, unsigned int,
 				unsigned long);
-static int me4000_ext_int_enable(me4000_ext_int_context_t *);
-static int me4000_ext_int_disable(me4000_ext_int_context_t *);
+static int me4000_ext_int_enable(struct me4000_ext_int_context *);
+static int me4000_ext_int_disable(struct me4000_ext_int_context *);
 static int me4000_ext_int_count(unsigned long *arg,
-				me4000_ext_int_context_t * ext_int_context);
+				struct me4000_ext_int_context *ext_int_context);
 static int me4000_ext_int_fasync(int fd, struct file *file_ptr, int mode);
 
 /*-----------------------------------------------------------------------------
@@ -260,27 +246,18 @@
 /*-----------------------------------------------------------------------------
   Inline functions
   ---------------------------------------------------------------------------*/
-static int inline me4000_buf_count(me4000_circ_buf_t, int);
-static int inline me4000_buf_space(me4000_circ_buf_t, int);
-static int inline me4000_space_to_end(me4000_circ_buf_t, int);
-static int inline me4000_values_to_end(me4000_circ_buf_t, int);
 
-static void inline me4000_outb(unsigned char value, unsigned long port);
-static void inline me4000_outl(unsigned long value, unsigned long port);
-static unsigned long inline me4000_inl(unsigned long port);
-static unsigned char inline me4000_inb(unsigned long port);
-
-static int me4000_buf_count(me4000_circ_buf_t buf, int size)
+static int inline me4000_buf_count(struct me4000_circ_buf buf, int size)
 {
 	return ((buf.head - buf.tail) & (size - 1));
 }
 
-static int me4000_buf_space(me4000_circ_buf_t buf, int size)
+static int inline me4000_buf_space(struct me4000_circ_buf buf, int size)
 {
 	return ((buf.tail - (buf.head + 1)) & (size - 1));
 }
 
-static int me4000_values_to_end(me4000_circ_buf_t buf, int size)
+static int inline me4000_values_to_end(struct me4000_circ_buf buf, int size)
 {
 	int end;
 	int n;
@@ -289,7 +266,7 @@
 	return (n < end) ? n : end;
 }
 
-static int me4000_space_to_end(me4000_circ_buf_t buf, int size)
+static int inline me4000_space_to_end(struct me4000_circ_buf buf, int size)
 {
 	int end;
 	int n;
@@ -299,19 +276,19 @@
 	return (n <= end) ? n : (end + 1);
 }
 
-static void me4000_outb(unsigned char value, unsigned long port)
+static void inline me4000_outb(unsigned char value, unsigned long port)
 {
 	PORT_PDEBUG("--> 0x%02X port 0x%04lX\n", value, port);
 	outb(value, port);
 }
 
-static void me4000_outl(unsigned long value, unsigned long port)
+static void inline me4000_outl(unsigned long value, unsigned long port)
 {
 	PORT_PDEBUG("--> 0x%08lX port 0x%04lX\n", value, port);
 	outl(value, port);
 }
 
-static unsigned long me4000_inl(unsigned long port)
+static unsigned long inline me4000_inl(unsigned long port)
 {
 	unsigned long value;
 	value = inl(port);
@@ -319,7 +296,7 @@
 	return value;
 }
 
-static unsigned char me4000_inb(unsigned long port)
+static unsigned char inline me4000_inb(unsigned long port)
 {
 	unsigned char value;
 	value = inb(port);
@@ -327,102 +304,102 @@
 	return value;
 }
 
-struct pci_driver me4000_driver = {
+static struct pci_driver me4000_driver = {
 	.name = ME4000_NAME,
 	.id_table = me4000_pci_table,
 	.probe = me4000_probe
 };
 
 static struct file_operations me4000_ao_fops_sing = {
-      owner:THIS_MODULE,
-      write:me4000_ao_write_sing,
-      ioctl:me4000_ao_ioctl_sing,
-      open:me4000_open,
-      release:me4000_release,
+      .owner = THIS_MODULE,
+      .write = me4000_ao_write_sing,
+      .ioctl = me4000_ao_ioctl_sing,
+      .open = me4000_open,
+      .release = me4000_release,
 };
 
 static struct file_operations me4000_ao_fops_wrap = {
-      owner:THIS_MODULE,
-      write:me4000_ao_write_wrap,
-      ioctl:me4000_ao_ioctl_wrap,
-      open:me4000_open,
-      release:me4000_release,
+      .owner = THIS_MODULE,
+      .write = me4000_ao_write_wrap,
+      .ioctl = me4000_ao_ioctl_wrap,
+      .open = me4000_open,
+      .release = me4000_release,
 };
 
 static struct file_operations me4000_ao_fops_cont = {
-      owner:THIS_MODULE,
-      write:me4000_ao_write_cont,
-      poll:me4000_ao_poll_cont,
-      ioctl:me4000_ao_ioctl_cont,
-      open:me4000_open,
-      release:me4000_release,
-      fsync:me4000_ao_fsync_cont,
+      .owner = THIS_MODULE,
+      .write = me4000_ao_write_cont,
+      .poll = me4000_ao_poll_cont,
+      .ioctl = me4000_ao_ioctl_cont,
+      .open = me4000_open,
+      .release = me4000_release,
+      .fsync = me4000_ao_fsync_cont,
 };
 
 static struct file_operations me4000_ai_fops_sing = {
-      owner:THIS_MODULE,
-      ioctl:me4000_ai_ioctl_sing,
-      open:me4000_open,
-      release:me4000_release,
+      .owner = THIS_MODULE,
+      .ioctl = me4000_ai_ioctl_sing,
+      .open = me4000_open,
+      .release = me4000_release,
 };
 
 static struct file_operations me4000_ai_fops_cont_sw = {
-      owner:THIS_MODULE,
-      read:me4000_ai_read,
-      poll:me4000_ai_poll,
-      ioctl:me4000_ai_ioctl_sw,
-      open:me4000_open,
-      release:me4000_release,
-      fasync:me4000_ai_fasync,
+      .owner = THIS_MODULE,
+      .read = me4000_ai_read,
+      .poll = me4000_ai_poll,
+      .ioctl = me4000_ai_ioctl_sw,
+      .open = me4000_open,
+      .release = me4000_release,
+      .fasync = me4000_ai_fasync,
 };
 
 static struct file_operations me4000_ai_fops_cont_et = {
-      owner:THIS_MODULE,
-      read:me4000_ai_read,
-      poll:me4000_ai_poll,
-      ioctl:me4000_ai_ioctl_ext,
-      open:me4000_open,
-      release:me4000_release,
+      .owner = THIS_MODULE,
+      .read = me4000_ai_read,
+      .poll = me4000_ai_poll,
+      .ioctl = me4000_ai_ioctl_ext,
+      .open = me4000_open,
+      .release = me4000_release,
 };
 
 static struct file_operations me4000_ai_fops_cont_et_value = {
-      owner:THIS_MODULE,
-      read:me4000_ai_read,
-      poll:me4000_ai_poll,
-      ioctl:me4000_ai_ioctl_ext,
-      open:me4000_open,
-      release:me4000_release,
+      .owner = THIS_MODULE,
+      .read = me4000_ai_read,
+      .poll = me4000_ai_poll,
+      .ioctl = me4000_ai_ioctl_ext,
+      .open = me4000_open,
+      .release = me4000_release,
 };
 
 static struct file_operations me4000_ai_fops_cont_et_chanlist = {
-      owner:THIS_MODULE,
-      read:me4000_ai_read,
-      poll:me4000_ai_poll,
-      ioctl:me4000_ai_ioctl_ext,
-      open:me4000_open,
-      release:me4000_release,
+      .owner = THIS_MODULE,
+      .read = me4000_ai_read,
+      .poll = me4000_ai_poll,
+      .ioctl = me4000_ai_ioctl_ext,
+      .open = me4000_open,
+      .release = me4000_release,
 };
 
 static struct file_operations me4000_dio_fops = {
-      owner:THIS_MODULE,
-      ioctl:me4000_dio_ioctl,
-      open:me4000_open,
-      release:me4000_release,
+      .owner = THIS_MODULE,
+      .ioctl = me4000_dio_ioctl,
+      .open = me4000_open,
+      .release = me4000_release,
 };
 
 static struct file_operations me4000_cnt_fops = {
-      owner:THIS_MODULE,
-      ioctl:me4000_cnt_ioctl,
-      open:me4000_open,
-      release:me4000_release,
+      .owner = THIS_MODULE,
+      .ioctl = me4000_cnt_ioctl,
+      .open = me4000_open,
+      .release = me4000_release,
 };
 
 static struct file_operations me4000_ext_int_fops = {
-      owner:THIS_MODULE,
-      ioctl:me4000_ext_int_ioctl,
-      open:me4000_open,
-      release:me4000_release,
-      fasync:me4000_ext_int_fasync,
+      .owner = THIS_MODULE,
+      .ioctl = me4000_ext_int_ioctl,
+      .open = me4000_open,
+      .release = me4000_release,
+      .fasync = me4000_ext_int_fasync,
 };
 
 static struct file_operations *me4000_ao_fops_array[] = {
@@ -439,9 +416,9 @@
 	&me4000_ai_fops_cont_et_chanlist,	// work through one channel list by external trigger
 };
 
-int __init me4000_init_module(void)
+static int __init me4000_init_module(void)
 {
-	int result = 0;
+	int result;
 
 	CALL_PDEBUG("init_module() is executed\n");
 
@@ -533,26 +510,26 @@
 
 	return 0;
 
-      INIT_ERROR_7:
+INIT_ERROR_7:
 	unregister_chrdev(me4000_ext_int_major_driver_no, ME4000_EXT_INT_NAME);
 
-      INIT_ERROR_6:
+INIT_ERROR_6:
 	unregister_chrdev(me4000_cnt_major_driver_no, ME4000_CNT_NAME);
 
-      INIT_ERROR_5:
+INIT_ERROR_5:
 	unregister_chrdev(me4000_dio_major_driver_no, ME4000_DIO_NAME);
 
-      INIT_ERROR_4:
+INIT_ERROR_4:
 	unregister_chrdev(me4000_ai_major_driver_no, ME4000_AI_NAME);
 
-      INIT_ERROR_3:
+INIT_ERROR_3:
 	unregister_chrdev(me4000_ao_major_driver_no, ME4000_AO_NAME);
 
-      INIT_ERROR_2:
+INIT_ERROR_2:
 	pci_unregister_driver(&me4000_driver);
 	clear_board_info_list();
 
-      INIT_ERROR_1:
+INIT_ERROR_1:
 	return result;
 }
 
@@ -562,18 +539,18 @@
 {
 	struct list_head *board_p;
 	struct list_head *dac_p;
-	me4000_info_t *board_info;
-	me4000_ao_context_t *ao_context;
+	struct me4000_info *board_info;
+	struct me4000_ao_context *ao_context;
 
 	/* Clear context lists */
 	for (board_p = me4000_board_info_list.next;
 	     board_p != &me4000_board_info_list; board_p = board_p->next) {
-		board_info = list_entry(board_p, me4000_info_t, list);
+		board_info = list_entry(board_p, struct me4000_info, list);
 		/* Clear analog output context list */
 		while (!list_empty(&board_info->ao_context_list)) {
 			dac_p = board_info->ao_context_list.next;
 			ao_context =
-			    list_entry(dac_p, me4000_ao_context_t, list);
+			    list_entry(dac_p, struct me4000_ao_context, list);
 			me4000_ao_reset(ao_context);
 			free_irq(ao_context->irq, ao_context);
 			if (ao_context->circ_buf.buf)
@@ -600,14 +577,14 @@
 	/* Clear the board info list */
 	while (!list_empty(&me4000_board_info_list)) {
 		board_p = me4000_board_info_list.next;
-		board_info = list_entry(board_p, me4000_info_t, list);
+		board_info = list_entry(board_p, struct me4000_info, list);
 		pci_release_regions(board_info->pci_dev_p);
 		list_del(board_p);
 		kfree(board_info);
 	}
 }
 
-static int get_registers(struct pci_dev *dev, me4000_info_t * board_info)
+static int get_registers(struct pci_dev *dev, struct me4000_info *board_info)
 {
 
 	/*--------------------------- plx regbase ---------------------------------*/
@@ -667,20 +644,20 @@
 }
 
 static int init_board_info(struct pci_dev *pci_dev_p,
-			   me4000_info_t * board_info)
+			   struct me4000_info *board_info)
 {
 	int i;
 	int result;
 	struct list_head *board_p;
 	board_info->pci_dev_p = pci_dev_p;
 
-	for (i = 0; i < ME4000_BOARD_VERSIONS; i++) {
+	for (i = 0; i < ARRAY_SIZE(me4000_boards); i++) {
 		if (me4000_boards[i].device_id == pci_dev_p->device) {
 			board_info->board_p = &me4000_boards[i];
 			break;
 		}
 	}
-	if (i == ME4000_BOARD_VERSIONS) {
+	if (i == ARRAY_SIZE(me4000_boards)) {
 		printk(KERN_ERR
 		       "ME4000:init_board_info():Device ID not valid\n");
 		return -ENODEV;
@@ -755,21 +732,21 @@
 	return 0;
 }
 
-static int alloc_ao_contexts(me4000_info_t * info)
+static int alloc_ao_contexts(struct me4000_info *info)
 {
 	int i;
 	int err;
-	me4000_ao_context_t *ao_context;
+	struct me4000_ao_context *ao_context;
 
 	for (i = 0; i < info->board_p->ao.count; i++) {
-		ao_context = kmalloc(sizeof(me4000_ao_context_t), GFP_KERNEL);
+		ao_context = kzalloc(sizeof(struct me4000_ao_context),
+								GFP_KERNEL);
 		if (!ao_context) {
 			printk(KERN_ERR
 			       "alloc_ao_contexts():Can't get memory for ao context\n");
 			release_ao_contexts(info);
 			return -ENOMEM;
 		}
-		memset(ao_context, 0, sizeof(me4000_ao_context_t));
 
 		spin_lock_init(&ao_context->use_lock);
 		spin_lock_init(&ao_context->int_lock);
@@ -780,15 +757,13 @@
 		if (info->board_p->ao.fifo_count) {
 			/* Allocate circular buffer */
 			ao_context->circ_buf.buf =
-			    kmalloc(ME4000_AO_BUFFER_SIZE, GFP_KERNEL);
+			    kzalloc(ME4000_AO_BUFFER_SIZE, GFP_KERNEL);
 			if (!ao_context->circ_buf.buf) {
 				printk(KERN_ERR
 				       "alloc_ao_contexts():Can't get circular buffer\n");
 				release_ao_contexts(info);
 				return -ENOMEM;
 			}
-			memset(ao_context->circ_buf.buf, 0,
-			       ME4000_AO_BUFFER_SIZE);
 
 			/* Clear the circular buffer */
 			ao_context->circ_buf.head = 0;
@@ -872,9 +847,8 @@
 					ME4000_NAME, ao_context);
 			if (err) {
 				printk(KERN_ERR
-				       "alloc_ao_contexts():Can't get interrupt line");
-				if (ao_context->circ_buf.buf)
-					kfree(ao_context->circ_buf.buf);
+				       "%s:Can't get interrupt line", __func__);
+				kfree(ao_context->circ_buf.buf);
 				kfree(ao_context);
 				release_ao_contexts(info);
 				return -ENODEV;
@@ -888,35 +862,34 @@
 	return 0;
 }
 
-static void release_ao_contexts(me4000_info_t * board_info)
+static void release_ao_contexts(struct me4000_info *board_info)
 {
 	struct list_head *dac_p;
-	me4000_ao_context_t *ao_context;
+	struct me4000_ao_context *ao_context;
 
 	/* Clear analog output context list */
 	while (!list_empty(&board_info->ao_context_list)) {
 		dac_p = board_info->ao_context_list.next;
-		ao_context = list_entry(dac_p, me4000_ao_context_t, list);
+		ao_context = list_entry(dac_p, struct me4000_ao_context, list);
 		free_irq(ao_context->irq, ao_context);
-		if (ao_context->circ_buf.buf)
-			kfree(ao_context->circ_buf.buf);
+		kfree(ao_context->circ_buf.buf);
 		list_del(dac_p);
 		kfree(ao_context);
 	}
 }
 
-static int alloc_ai_context(me4000_info_t * info)
+static int alloc_ai_context(struct me4000_info *info)
 {
-	me4000_ai_context_t *ai_context;
+	struct me4000_ai_context *ai_context;
 
 	if (info->board_p->ai.count) {
-		ai_context = kmalloc(sizeof(me4000_ai_context_t), GFP_KERNEL);
+		ai_context = kzalloc(sizeof(struct me4000_ai_context),
+								GFP_KERNEL);
 		if (!ai_context) {
 			printk(KERN_ERR
 			       "ME4000:alloc_ai_context():Can't get memory for ai context\n");
 			return -ENOMEM;
 		}
-		memset(ai_context, 0, sizeof(me4000_ai_context_t));
 
 		info->ai_context = ai_context;
 
@@ -958,18 +931,18 @@
 	return 0;
 }
 
-static int alloc_dio_context(me4000_info_t * info)
+static int alloc_dio_context(struct me4000_info *info)
 {
-	me4000_dio_context_t *dio_context;
+	struct me4000_dio_context *dio_context;
 
 	if (info->board_p->dio.count) {
-		dio_context = kmalloc(sizeof(me4000_dio_context_t), GFP_KERNEL);
+		dio_context = kzalloc(sizeof(struct me4000_dio_context),
+								GFP_KERNEL);
 		if (!dio_context) {
 			printk(KERN_ERR
 			       "ME4000:alloc_dio_context():Can't get memory for dio context\n");
 			return -ENOMEM;
 		}
-		memset(dio_context, 0, sizeof(me4000_dio_context_t));
 
 		info->dio_context = dio_context;
 
@@ -995,18 +968,18 @@
 	return 0;
 }
 
-static int alloc_cnt_context(me4000_info_t * info)
+static int alloc_cnt_context(struct me4000_info *info)
 {
-	me4000_cnt_context_t *cnt_context;
+	struct me4000_cnt_context *cnt_context;
 
 	if (info->board_p->cnt.count) {
-		cnt_context = kmalloc(sizeof(me4000_cnt_context_t), GFP_KERNEL);
+		cnt_context = kzalloc(sizeof(struct me4000_cnt_context),
+								GFP_KERNEL);
 		if (!cnt_context) {
 			printk(KERN_ERR
 			       "ME4000:alloc_cnt_context():Can't get memory for cnt context\n");
 			return -ENOMEM;
 		}
-		memset(cnt_context, 0, sizeof(me4000_cnt_context_t));
 
 		info->cnt_context = cnt_context;
 
@@ -1026,19 +999,18 @@
 	return 0;
 }
 
-static int alloc_ext_int_context(me4000_info_t * info)
+static int alloc_ext_int_context(struct me4000_info *info)
 {
-	me4000_ext_int_context_t *ext_int_context;
+	struct me4000_ext_int_context *ext_int_context;
 
 	if (info->board_p->cnt.count) {
 		ext_int_context =
-		    kmalloc(sizeof(me4000_ext_int_context_t), GFP_KERNEL);
+		    kzalloc(sizeof(struct me4000_ext_int_context), GFP_KERNEL);
 		if (!ext_int_context) {
 			printk(KERN_ERR
 			       "ME4000:alloc_ext_int_context():Can't get memory for cnt context\n");
 			return -ENOMEM;
 		}
-		memset(ext_int_context, 0, sizeof(me4000_ext_int_context_t));
 
 		info->ext_int_context = ext_int_context;
 
@@ -1060,19 +1032,18 @@
 static int me4000_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	int result = 0;
-	me4000_info_t *board_info;
+	struct me4000_info *board_info;
 
 	CALL_PDEBUG("me4000_probe() is executed\n");
 
 	/* Allocate structure for board context */
-	board_info = kmalloc(sizeof(me4000_info_t), GFP_KERNEL);
+	board_info = kzalloc(sizeof(struct me4000_info), GFP_KERNEL);
 	if (!board_info) {
 		printk(KERN_ERR
 		       "ME4000:Can't get memory for board info structure\n");
 		result = -ENOMEM;
 		goto PROBE_ERROR_1;
 	}
-	memset(board_info, 0, sizeof(me4000_info_t));
 
 	/* Add to global linked list */
 	list_add_tail(&board_info->list, &me4000_board_info_list);
@@ -1080,70 +1051,70 @@
 	/* Get the PCI base registers */
 	result = get_registers(dev, board_info);
 	if (result) {
-		printk(KERN_ERR "me4000_probe():Cannot get registers\n");
+		printk(KERN_ERR "%s:Cannot get registers\n", __func__);
 		goto PROBE_ERROR_2;
 	}
 
 	/* Enable the device */
 	result = pci_enable_device(dev);
 	if (result < 0) {
-		printk(KERN_ERR "me4000_probe():Cannot enable PCI device\n");
+		printk(KERN_ERR "%s:Cannot enable PCI device\n", __func__);
 		goto PROBE_ERROR_2;
 	}
 
 	/* Request the PCI register regions */
 	result = pci_request_regions(dev, ME4000_NAME);
 	if (result < 0) {
-		printk(KERN_ERR "me4000_probe():Cannot request I/O regions\n");
+		printk(KERN_ERR "%s:Cannot request I/O regions\n", __func__);
 		goto PROBE_ERROR_2;
 	}
 
 	/* Initialize board info */
 	result = init_board_info(dev, board_info);
 	if (result) {
-		printk(KERN_ERR "me4000_probe():Cannot init baord info\n");
+		printk(KERN_ERR "%s:Cannot init baord info\n", __func__);
 		goto PROBE_ERROR_3;
 	}
 
 	/* Download the xilinx firmware */
 	result = me4000_xilinx_download(board_info);
 	if (result) {
-		printk(KERN_ERR "me4000_probe:Can't download firmware\n");
+		printk(KERN_ERR "%s:Can't download firmware\n", __func__);
 		goto PROBE_ERROR_3;
 	}
 
 	/* Make a hardware reset */
 	result = me4000_reset_board(board_info);
 	if (result) {
-		printk(KERN_ERR "me4000_probe:Can't reset board\n");
+		printk(KERN_ERR "%s :Can't reset board\n", __func__);
 		goto PROBE_ERROR_3;
 	}
 
 	/* Allocate analog output context structures */
 	result = alloc_ao_contexts(board_info);
 	if (result) {
-		printk(KERN_ERR "me4000_probe():Cannot allocate ao contexts\n");
+		printk(KERN_ERR "%s:Cannot allocate ao contexts\n", __func__);
 		goto PROBE_ERROR_3;
 	}
 
 	/* Allocate analog input context */
 	result = alloc_ai_context(board_info);
 	if (result) {
-		printk(KERN_ERR "me4000_probe():Cannot allocate ai context\n");
+		printk(KERN_ERR "%s:Cannot allocate ai context\n", __func__);
 		goto PROBE_ERROR_4;
 	}
 
 	/* Allocate digital I/O context */
 	result = alloc_dio_context(board_info);
 	if (result) {
-		printk(KERN_ERR "me4000_probe():Cannot allocate dio context\n");
+		printk(KERN_ERR "%s:Cannot allocate dio context\n", __func__);
 		goto PROBE_ERROR_5;
 	}
 
 	/* Allocate counter context */
 	result = alloc_cnt_context(board_info);
 	if (result) {
-		printk(KERN_ERR "me4000_probe():Cannot allocate cnt context\n");
+		printk(KERN_ERR "%s:Cannot allocate cnt context\n", __func__);
 		goto PROBE_ERROR_6;
 	}
 
@@ -1151,36 +1122,36 @@
 	result = alloc_ext_int_context(board_info);
 	if (result) {
 		printk(KERN_ERR
-		       "me4000_probe():Cannot allocate ext_int context\n");
+		       "%s:Cannot allocate ext_int context\n", __func__);
 		goto PROBE_ERROR_7;
 	}
 
 	return 0;
 
-      PROBE_ERROR_7:
+PROBE_ERROR_7:
 	kfree(board_info->cnt_context);
 
-      PROBE_ERROR_6:
+PROBE_ERROR_6:
 	kfree(board_info->dio_context);
 
-      PROBE_ERROR_5:
+PROBE_ERROR_5:
 	kfree(board_info->ai_context);
 
-      PROBE_ERROR_4:
+PROBE_ERROR_4:
 	release_ao_contexts(board_info);
 
-      PROBE_ERROR_3:
+PROBE_ERROR_3:
 	pci_release_regions(dev);
 
-      PROBE_ERROR_2:
+PROBE_ERROR_2:
 	list_del(&board_info->list);
 	kfree(board_info);
 
-      PROBE_ERROR_1:
+PROBE_ERROR_1:
 	return result;
 }
 
-static int me4000_xilinx_download(me4000_info_t * info)
+static int me4000_xilinx_download(struct me4000_info *info)
 {
 	int size = 0;
 	u32 value = 0;
@@ -1211,7 +1182,7 @@
 	/* Wait until /INIT pin is set */
 	udelay(20);
 	if (!inl(info->plx_regbase + PLX_INTCSR) & 0x20) {
-		printk(KERN_ERR "me4000_xilinx_download():Can't init Xilinx\n");
+		printk(KERN_ERR "%s:Can't init Xilinx\n", __func__);
 		return -EIO;
 	}
 
@@ -1232,7 +1203,7 @@
 		/* Check if BUSY flag is low */
 		if (inl(info->plx_regbase + PLX_ICR) & 0x20) {
 			printk(KERN_ERR
-			       "me4000_xilinx_download():Xilinx is still busy (idx = %d)\n",
+			       "%s:Xilinx is still busy (idx = %d)\n", __func__,
 			       idx);
 			return -EIO;
 		}
@@ -1246,9 +1217,9 @@
 		PDEBUG("me4000_xilinx_download():Download was successful\n");
 	} else {
 		printk(KERN_ERR
-		       "ME4000:me4000_xilinx_download():DONE flag is not set\n");
+		       "ME4000:%s:DONE flag is not set\n", __func__);
 		printk(KERN_ERR
-		       "ME4000:me4000_xilinx_download():Download not succesful\n");
+		       "ME4000:%s:Download not succesful\n", __func__);
 		return -EIO;
 	}
 
@@ -1260,7 +1231,7 @@
 	return 0;
 }
 
-static int me4000_reset_board(me4000_info_t * info)
+static int me4000_reset_board(struct me4000_info *info)
 {
 	unsigned long icr;
 
@@ -1314,12 +1285,12 @@
 	int err = 0;
 	int i;
 	struct list_head *ptr;
-	me4000_info_t *board_info = NULL;
-	me4000_ao_context_t *ao_context = NULL;
-	me4000_ai_context_t *ai_context = NULL;
-	me4000_dio_context_t *dio_context = NULL;
-	me4000_cnt_context_t *cnt_context = NULL;
-	me4000_ext_int_context_t *ext_int_context = NULL;
+	struct me4000_info *board_info = NULL;
+	struct me4000_ao_context *ao_context = NULL;
+	struct me4000_ai_context *ai_context = NULL;
+	struct me4000_dio_context *dio_context = NULL;
+	struct me4000_cnt_context *cnt_context = NULL;
+	struct me4000_ext_int_context *ext_int_context = NULL;
 
 	CALL_PDEBUG("me4000_open() is executed\n");
 
@@ -1335,7 +1306,7 @@
 		/* Search for the board context */
 		for (ptr = me4000_board_info_list.next, i = 0;
 		     ptr != &me4000_board_info_list; ptr = ptr->next, i++) {
-			board_info = list_entry(ptr, me4000_info_t, list);
+			board_info = list_entry(ptr, struct me4000_info, list);
 			if (i == board)
 				break;
 		}
@@ -1351,7 +1322,8 @@
 		for (ptr = board_info->ao_context_list.next, i = 0;
 		     ptr != &board_info->ao_context_list;
 		     ptr = ptr->next, i++) {
-			ao_context = list_entry(ptr, me4000_ao_context_t, list);
+			ao_context = list_entry(ptr, struct me4000_ao_context,
+									list);
 			if (i == dev)
 				break;
 		}
@@ -1415,7 +1387,7 @@
 		/* Search for the board context */
 		for (ptr = me4000_board_info_list.next, i = 0;
 		     ptr != &me4000_board_info_list; ptr = ptr->next, i++) {
-			board_info = list_entry(ptr, me4000_info_t, list);
+			board_info = list_entry(ptr, struct me4000_info, list);
 			if (i == board)
 				break;
 		}
@@ -1469,7 +1441,7 @@
 		/* Search for the board context */
 		for (ptr = me4000_board_info_list.next;
 		     ptr != &me4000_board_info_list; ptr = ptr->next) {
-			board_info = list_entry(ptr, me4000_info_t, list);
+			board_info = list_entry(ptr, struct me4000_info, list);
 			if (board_info->board_count == board)
 				break;
 		}
@@ -1514,7 +1486,7 @@
 		/* Search for the board context */
 		for (ptr = me4000_board_info_list.next;
 		     ptr != &me4000_board_info_list; ptr = ptr->next) {
-			board_info = list_entry(ptr, me4000_info_t, list);
+			board_info = list_entry(ptr, struct me4000_info, list);
 			if (board_info->board_count == board)
 				break;
 		}
@@ -1557,7 +1529,7 @@
 		/* Search for the board context */
 		for (ptr = me4000_board_info_list.next;
 		     ptr != &me4000_board_info_list; ptr = ptr->next) {
-			board_info = list_entry(ptr, me4000_info_t, list);
+			board_info = list_entry(ptr, struct me4000_info, list);
 			if (board_info->board_count == board)
 				break;
 		}
@@ -1613,11 +1585,11 @@
 
 static int me4000_release(struct inode *inode_p, struct file *file_p)
 {
-	me4000_ao_context_t *ao_context;
-	me4000_ai_context_t *ai_context;
-	me4000_dio_context_t *dio_context;
-	me4000_cnt_context_t *cnt_context;
-	me4000_ext_int_context_t *ext_int_context;
+	struct me4000_ao_context *ao_context;
+	struct me4000_ai_context *ai_context;
+	struct me4000_dio_context *dio_context;
+	struct me4000_cnt_context *cnt_context;
+	struct me4000_ext_int_context *ext_int_context;
 
 	CALL_PDEBUG("me4000_release() is executed\n");
 
@@ -1677,7 +1649,7 @@
 
 /*------------------------------- Analog output stuff --------------------------------------*/
 
-static int me4000_ao_prepare(me4000_ao_context_t * ao_context)
+static int me4000_ao_prepare(struct me4000_ao_context *ao_context)
 {
 	unsigned long flags;
 
@@ -1756,7 +1728,7 @@
 	return 0;
 }
 
-static int me4000_ao_reset(me4000_ao_context_t * ao_context)
+static int me4000_ao_reset(struct me4000_ao_context *ao_context)
 {
 	u32 tmp;
 	wait_queue_head_t queue;
@@ -1777,9 +1749,10 @@
 		tmp |= ME4000_AO_CTRL_BIT_IMMEDIATE_STOP;
 		me4000_outl(tmp, ao_context->ctrl_reg);
 
-		while (inl(ao_context->status_reg) & ME4000_AO_STATUS_BIT_FSM) {
-			sleep_on_timeout(&queue, 1);
-		}
+		wait_event_timeout(queue,
+			(inl(ao_context->status_reg) &
+				ME4000_AO_STATUS_BIT_FSM) == 0,
+			1);
 
 		/* Set to transparent mode */
 		me4000_ao_simultaneous_disable(ao_context);
@@ -1812,9 +1785,10 @@
 		me4000_outl(tmp, ao_context->ctrl_reg);
 		spin_unlock_irqrestore(&ao_context->int_lock, flags);
 
-		while (inl(ao_context->status_reg) & ME4000_AO_STATUS_BIT_FSM) {
-			sleep_on_timeout(&queue, 1);
-		}
+		wait_event_timeout(queue,
+			(inl(ao_context->status_reg) &
+				ME4000_AO_STATUS_BIT_FSM) == 0,
+			1);
 
 		/* Clear the circular buffer */
 		ao_context->circ_buf.head = 0;
@@ -1853,9 +1827,9 @@
 }
 
 static ssize_t me4000_ao_write_sing(struct file *filep, const char *buff,
-				    size_t cnt, loff_t * offp)
+				    size_t cnt, loff_t *offp)
 {
-	me4000_ao_context_t *ao_context = filep->private_data;
+	struct me4000_ao_context *ao_context = filep->private_data;
 	u32 value;
 	const u16 *buffer = (const u16 *)buff;
 
@@ -1863,13 +1837,13 @@
 
 	if (cnt != 2) {
 		printk(KERN_ERR
-		       "me4000_ao_write_sing():Write count is not 2\n");
+		       "%s:Write count is not 2\n", __func__);
 		return -EINVAL;
 	}
 
 	if (get_user(value, buffer)) {
 		printk(KERN_ERR
-		       "me4000_ao_write_sing():Cannot copy data from user\n");
+		       "%s:Cannot copy data from user\n", __func__);
 		return -EFAULT;
 	}
 
@@ -1879,9 +1853,9 @@
 }
 
 static ssize_t me4000_ao_write_wrap(struct file *filep, const char *buff,
-				    size_t cnt, loff_t * offp)
+				    size_t cnt, loff_t *offp)
 {
-	me4000_ao_context_t *ao_context = filep->private_data;
+	struct me4000_ao_context *ao_context = filep->private_data;
 	size_t i;
 	u32 value;
 	u32 tmp;
@@ -1893,13 +1867,13 @@
 	/* Check if a conversion is already running */
 	if (inl(ao_context->status_reg) & ME4000_AO_STATUS_BIT_FSM) {
 		printk(KERN_ERR
-		       "ME4000:me4000_ao_write_wrap():There is already a conversion running\n");
+		       "%s:There is already a conversion running\n", __func__);
 		return -EBUSY;
 	}
 
 	if (count > ME4000_AO_FIFO_COUNT) {
 		printk(KERN_ERR
-		       "me4000_ao_write_wrap():Can't load more than %d values\n",
+		       "%s:Can't load more than %d values\n", __func__,
 		       ME4000_AO_FIFO_COUNT);
 		return -ENOSPC;
 	}
@@ -1914,7 +1888,7 @@
 	for (i = 0; i < count; i++) {
 		if (get_user(value, buffer + i)) {
 			printk(KERN_ERR
-			       "me4000_ao_write_single():Cannot copy data from user\n");
+			       "%s:Cannot copy data from user\n", __func__);
 			return -EFAULT;
 		}
 		if (((ao_context->fifo_reg & 0xFF) == ME4000_AO_01_FIFO_REG)
@@ -1928,9 +1902,9 @@
 }
 
 static ssize_t me4000_ao_write_cont(struct file *filep, const char *buff,
-				    size_t cnt, loff_t * offp)
+				    size_t cnt, loff_t *offp)
 {
-	me4000_ao_context_t *ao_context = filep->private_data;
+	struct me4000_ao_context *ao_context = filep->private_data;
 	const u16 *buffer = (const u16 *)buff;
 	size_t count = cnt / 2;
 	unsigned long flags;
@@ -2154,9 +2128,9 @@
 	return 2 * ret;
 }
 
-static unsigned int me4000_ao_poll_cont(struct file *file_p, poll_table * wait)
+static unsigned int me4000_ao_poll_cont(struct file *file_p, poll_table *wait)
 {
-	me4000_ao_context_t *ao_context;
+	struct me4000_ao_context *ao_context;
 	unsigned long mask = 0;
 
 	CALL_PDEBUG("me4000_ao_poll_cont() is executed\n");
@@ -2177,7 +2151,7 @@
 static int me4000_ao_fsync_cont(struct file *file_p, struct dentry *dentry_p,
 				int datasync)
 {
-	me4000_ao_context_t *ao_context;
+	struct me4000_ao_context *ao_context;
 	wait_queue_head_t queue;
 
 	CALL_PDEBUG("me4000_ao_fsync_cont() is executed\n");
@@ -2187,15 +2161,19 @@
 
 	while (inl(ao_context->status_reg) & ME4000_AO_STATUS_BIT_FSM) {
 		interruptible_sleep_on_timeout(&queue, 1);
+			wait_event_interruptible_timeout(queue,
+			!(inl(ao_context->status_reg) & ME4000_AO_STATUS_BIT_FSM),
+			1);
 		if (ao_context->pipe_flag) {
 			printk(KERN_ERR
-			       "me4000_ao_fsync_cont():Broken pipe detected\n");
+			       "%s:Broken pipe detected\n", __func__);
 			return -EPIPE;
 		}
 
 		if (signal_pending(current)) {
 			printk(KERN_ERR
-			       "me4000_ao_fsync_cont():Wait on state machine interrupted\n");
+			       "%s:Wait on state machine interrupted\n",
+			       __func__);
 			return -EINTR;
 		}
 	}
@@ -2206,7 +2184,7 @@
 static int me4000_ao_ioctl_sing(struct inode *inode_p, struct file *file_p,
 				unsigned int service, unsigned long arg)
 {
-	me4000_ao_context_t *ao_context;
+	struct me4000_ao_context *ao_context;
 
 	CALL_PDEBUG("me4000_ao_ioctl_sing() is executed\n");
 
@@ -2229,7 +2207,7 @@
 	case ME4000_AO_PRELOAD_UPDATE:
 		return me4000_ao_preload_update(ao_context);
 	case ME4000_GET_USER_INFO:
-		return me4000_get_user_info((me4000_user_info_t *) arg,
+		return me4000_get_user_info((struct me4000_user_info *)arg,
 					    ao_context->board_info);
 	case ME4000_AO_SIMULTANEOUS_EX_TRIG:
 		return me4000_ao_simultaneous_ex_trig(ao_context);
@@ -2239,8 +2217,9 @@
 		return me4000_ao_simultaneous_disable(ao_context);
 	case ME4000_AO_SIMULTANEOUS_UPDATE:
 		return
-		    me4000_ao_simultaneous_update((me4000_ao_channel_list_t *)
-						  arg, ao_context);
+		    me4000_ao_simultaneous_update(
+		    		(struct me4000_ao_channel_list *)arg,
+				ao_context);
 	case ME4000_AO_EX_TRIG_TIMEOUT:
 		return me4000_ao_ex_trig_timeout((unsigned long *)arg,
 						 ao_context);
@@ -2258,7 +2237,7 @@
 static int me4000_ao_ioctl_wrap(struct inode *inode_p, struct file *file_p,
 				unsigned int service, unsigned long arg)
 {
-	me4000_ao_context_t *ao_context;
+	struct me4000_ao_context *ao_context;
 
 	CALL_PDEBUG("me4000_ao_ioctl_wrap() is executed\n");
 
@@ -2287,7 +2266,7 @@
 	case ME4000_AO_EX_TRIG_DISABLE:
 		return me4000_ao_ex_trig_disable(ao_context);
 	case ME4000_GET_USER_INFO:
-		return me4000_get_user_info((me4000_user_info_t *) arg,
+		return me4000_get_user_info((struct me4000_user_info *)arg,
 					    ao_context->board_info);
 	case ME4000_AO_FSM_STATE:
 		return me4000_ao_fsm_state((int *)arg, ao_context);
@@ -2310,7 +2289,7 @@
 static int me4000_ao_ioctl_cont(struct inode *inode_p, struct file *file_p,
 				unsigned int service, unsigned long arg)
 {
-	me4000_ao_context_t *ao_context;
+	struct me4000_ao_context *ao_context;
 
 	CALL_PDEBUG("me4000_ao_ioctl_cont() is executed\n");
 
@@ -2345,7 +2324,7 @@
 	case ME4000_AO_FSM_STATE:
 		return me4000_ao_fsm_state((int *)arg, ao_context);
 	case ME4000_GET_USER_INFO:
-		return me4000_get_user_info((me4000_user_info_t *) arg,
+		return me4000_get_user_info((struct me4000_user_info *)arg,
 					    ao_context->board_info);
 	case ME4000_AO_SYNCHRONOUS_EX_TRIG:
 		return me4000_ao_synchronous_ex_trig(ao_context);
@@ -2362,7 +2341,8 @@
 	return 0;
 }
 
-static int me4000_ao_start(unsigned long *arg, me4000_ao_context_t * ao_context)
+static int me4000_ao_start(unsigned long *arg,
+			   struct me4000_ao_context *ao_context)
 {
 	u32 tmp;
 	wait_queue_head_t queue;
@@ -2412,7 +2392,7 @@
 	return 0;
 }
 
-static int me4000_ao_stop(me4000_ao_context_t * ao_context)
+static int me4000_ao_stop(struct me4000_ao_context *ao_context)
 {
 	u32 tmp;
 	wait_queue_head_t queue;
@@ -2445,7 +2425,7 @@
 	return 0;
 }
 
-static int me4000_ao_immediate_stop(me4000_ao_context_t * ao_context)
+static int me4000_ao_immediate_stop(struct me4000_ao_context *ao_context)
 {
 	u32 tmp;
 	wait_queue_head_t queue;
@@ -2477,8 +2457,8 @@
 	return 0;
 }
 
-static int me4000_ao_timer_set_divisor(u32 * arg,
-				       me4000_ao_context_t * ao_context)
+static int me4000_ao_timer_set_divisor(u32 *arg,
+				       struct me4000_ao_context *ao_context)
 {
 	u32 divisor;
 	u32 tmp;
@@ -2518,7 +2498,7 @@
 }
 
 static int me4000_ao_ex_trig_set_edge(int *arg,
-				      me4000_ao_context_t * ao_context)
+				      struct me4000_ao_context *ao_context)
 {
 	int mode;
 	u32 tmp;
@@ -2569,7 +2549,7 @@
 	return 0;
 }
 
-static int me4000_ao_ex_trig_enable(me4000_ao_context_t * ao_context)
+static int me4000_ao_ex_trig_enable(struct me4000_ao_context *ao_context)
 {
 	u32 tmp;
 	unsigned long flags;
@@ -2593,7 +2573,7 @@
 	return 0;
 }
 
-static int me4000_ao_ex_trig_disable(me4000_ao_context_t * ao_context)
+static int me4000_ao_ex_trig_disable(struct me4000_ao_context *ao_context)
 {
 	u32 tmp;
 	unsigned long flags;
@@ -2617,7 +2597,7 @@
 	return 0;
 }
 
-static int me4000_ao_simultaneous_disable(me4000_ao_context_t * ao_context)
+static int me4000_ao_simultaneous_disable(struct me4000_ao_context *ao_context)
 {
 	u32 tmp;
 
@@ -2643,7 +2623,7 @@
 	return 0;
 }
 
-static int me4000_ao_simultaneous_ex_trig(me4000_ao_context_t * ao_context)
+static int me4000_ao_simultaneous_ex_trig(struct me4000_ao_context *ao_context)
 {
 	u32 tmp;
 
@@ -2659,7 +2639,7 @@
 	return 0;
 }
 
-static int me4000_ao_simultaneous_sw(me4000_ao_context_t * ao_context)
+static int me4000_ao_simultaneous_sw(struct me4000_ao_context *ao_context)
 {
 	u32 tmp;
 
@@ -2675,13 +2655,13 @@
 	return 0;
 }
 
-static int me4000_ao_preload(me4000_ao_context_t * ao_context)
+static int me4000_ao_preload(struct me4000_ao_context *ao_context)
 {
 	CALL_PDEBUG("me4000_ao_preload() is executed\n");
 	return me4000_ao_simultaneous_sw(ao_context);
 }
 
-static int me4000_ao_preload_update(me4000_ao_context_t * ao_context)
+static int me4000_ao_preload_update(struct me4000_ao_context *ao_context)
 {
 	u32 tmp;
 	u32 ctrl;
@@ -2705,10 +2685,12 @@
 			if (!
 			    (tmp &
 			     (0x1 <<
-			      (((me4000_ao_context_t *) entry)->index + 16)))) {
+			      (((struct me4000_ao_context *)entry)->index
+			      					      + 16)))) {
 				tmp &=
 				    ~(0x1 <<
-				      (((me4000_ao_context_t *) entry)->index));
+				      (((struct me4000_ao_context *)entry)->
+				      					index));
 			}
 		}
 	}
@@ -2718,18 +2700,19 @@
 	return 0;
 }
 
-static int me4000_ao_simultaneous_update(me4000_ao_channel_list_t * arg,
-					 me4000_ao_context_t * ao_context)
+static int me4000_ao_simultaneous_update(struct me4000_ao_channel_list *arg,
+					 struct me4000_ao_context *ao_context)
 {
 	int err;
 	int i;
 	u32 tmp;
-	me4000_ao_channel_list_t channels;
+	struct me4000_ao_channel_list channels;
 
 	CALL_PDEBUG("me4000_ao_simultaneous_update() is executed\n");
 
 	/* Copy data from user */
-	err = copy_from_user(&channels, arg, sizeof(me4000_ao_channel_list_t));
+	err = copy_from_user(&channels, arg,
+			sizeof(struct me4000_ao_channel_list));
 	if (err) {
 		printk(KERN_ERR
 		       "ME4000:me4000_ao_simultaneous_update():Can't copy command\n");
@@ -2737,13 +2720,12 @@
 	}
 
 	channels.list =
-	    kmalloc(sizeof(unsigned long) * channels.count, GFP_KERNEL);
+	    kzalloc(sizeof(unsigned long) * channels.count, GFP_KERNEL);
 	if (!channels.list) {
 		printk(KERN_ERR
 		       "ME4000:me4000_ao_simultaneous_update():Can't get buffer\n");
 		return -ENOMEM;
 	}
-	memset(channels.list, 0, sizeof(unsigned long) * channels.count);
 
 	/* Copy channel list from user */
 	err =
@@ -2777,7 +2759,7 @@
 	return 0;
 }
 
-static int me4000_ao_synchronous_ex_trig(me4000_ao_context_t * ao_context)
+static int me4000_ao_synchronous_ex_trig(struct me4000_ao_context *ao_context)
 {
 	u32 tmp;
 	unsigned long flags;
@@ -2813,7 +2795,7 @@
 	return 0;
 }
 
-static int me4000_ao_synchronous_sw(me4000_ao_context_t * ao_context)
+static int me4000_ao_synchronous_sw(struct me4000_ao_context *ao_context)
 {
 	u32 tmp;
 	unsigned long flags;
@@ -2848,13 +2830,13 @@
 	return 0;
 }
 
-static int me4000_ao_synchronous_disable(me4000_ao_context_t * ao_context)
+static int me4000_ao_synchronous_disable(struct me4000_ao_context *ao_context)
 {
 	return me4000_ao_simultaneous_disable(ao_context);
 }
 
 static int me4000_ao_get_free_buffer(unsigned long *arg,
-				     me4000_ao_context_t * ao_context)
+				     struct me4000_ao_context *ao_context)
 {
 	unsigned long c;
 	int err;
@@ -2864,7 +2846,7 @@
 	err = copy_to_user(arg, &c, sizeof(unsigned long));
 	if (err) {
 		printk(KERN_ERR
-		       "ME4000:me4000_ao_get_free_buffer():Can't copy to user space\n");
+		       "%s:Can't copy to user space\n", __func__);
 		return -EFAULT;
 	}
 
@@ -2872,7 +2854,7 @@
 }
 
 static int me4000_ao_ex_trig_timeout(unsigned long *arg,
-				     me4000_ao_context_t * ao_context)
+				     struct me4000_ao_context *ao_context)
 {
 	u32 tmp;
 	wait_queue_head_t queue;
@@ -2928,7 +2910,7 @@
 	return 0;
 }
 
-static int me4000_ao_enable_do(me4000_ao_context_t * ao_context)
+static int me4000_ao_enable_do(struct me4000_ao_context *ao_context)
 {
 	u32 tmp;
 	unsigned long flags;
@@ -2959,7 +2941,7 @@
 	return 0;
 }
 
-static int me4000_ao_disable_do(me4000_ao_context_t * ao_context)
+static int me4000_ao_disable_do(struct me4000_ao_context *ao_context)
 {
 	u32 tmp;
 	unsigned long flags;
@@ -2989,7 +2971,7 @@
 	return 0;
 }
 
-static int me4000_ao_fsm_state(int *arg, me4000_ao_context_t * ao_context)
+static int me4000_ao_fsm_state(int *arg, struct me4000_ao_context *ao_context)
 {
 	unsigned long tmp;
 
@@ -3012,9 +2994,9 @@
 	return 0;
 }
 
-/*------------------------------- Analog input stuff --------------------------------------*/
+/*------------------------- Analog input stuff -------------------------------*/
 
-static int me4000_ai_prepare(me4000_ai_context_t * ai_context)
+static int me4000_ai_prepare(struct me4000_ai_context *ai_context)
 {
 	wait_queue_head_t queue;
 	int err;
@@ -3057,14 +3039,13 @@
 
 		/* Allocate circular buffer */
 		ai_context->circ_buf.buf =
-		    kmalloc(ME4000_AI_BUFFER_SIZE, GFP_KERNEL);
+		    kzalloc(ME4000_AI_BUFFER_SIZE, GFP_KERNEL);
 		if (!ai_context->circ_buf.buf) {
 			printk(KERN_ERR
 			       "ME4000:me4000_ai_prepare():Can't get circular buffer\n");
 			free_irq(ai_context->irq, ai_context);
 			return -ENOMEM;
 		}
-		memset(ai_context->circ_buf.buf, 0, ME4000_AI_BUFFER_SIZE);
 
 		/* Clear the circular buffer */
 		ai_context->circ_buf.head = 0;
@@ -3074,7 +3055,7 @@
 	return 0;
 }
 
-static int me4000_ai_reset(me4000_ai_context_t * ai_context)
+static int me4000_ai_reset(struct me4000_ai_context *ai_context)
 {
 	wait_queue_head_t queue;
 	u32 tmp;
@@ -3139,7 +3120,7 @@
 static int me4000_ai_ioctl_sing(struct inode *inode_p, struct file *file_p,
 				unsigned int service, unsigned long arg)
 {
-	me4000_ai_context_t *ai_context;
+	struct me4000_ai_context *ai_context;
 
 	CALL_PDEBUG("me4000_ai_ioctl_sing() is executed\n");
 
@@ -3157,16 +3138,17 @@
 
 	switch (service) {
 	case ME4000_AI_SINGLE:
-		return me4000_ai_single((me4000_ai_single_t *) arg, ai_context);
+		return me4000_ai_single((struct me4000_ai_single *)arg,
+								ai_context);
 	case ME4000_AI_EX_TRIG_ENABLE:
 		return me4000_ai_ex_trig_enable(ai_context);
 	case ME4000_AI_EX_TRIG_DISABLE:
 		return me4000_ai_ex_trig_disable(ai_context);
 	case ME4000_AI_EX_TRIG_SETUP:
-		return me4000_ai_ex_trig_setup((me4000_ai_trigger_t *) arg,
+		return me4000_ai_ex_trig_setup((struct me4000_ai_trigger *)arg,
 					       ai_context);
 	case ME4000_GET_USER_INFO:
-		return me4000_get_user_info((me4000_user_info_t *) arg,
+		return me4000_get_user_info((struct me4000_user_info *)arg,
 					    ai_context->board_info);
 	case ME4000_AI_OFFSET_ENABLE:
 		return me4000_ai_offset_enable(ai_context);
@@ -3177,9 +3159,11 @@
 	case ME4000_AI_FULLSCALE_DISABLE:
 		return me4000_ai_fullscale_disable(ai_context);
 	case ME4000_AI_EEPROM_READ:
-		return me4000_eeprom_read((me4000_eeprom_t *) arg, ai_context);
+		return me4000_eeprom_read((struct me4000_eeprom *)arg,
+								ai_context);
 	case ME4000_AI_EEPROM_WRITE:
-		return me4000_eeprom_write((me4000_eeprom_t *) arg, ai_context);
+		return me4000_eeprom_write((struct me4000_eeprom *)arg,
+								ai_context);
 	default:
 		printk(KERN_ERR
 		       "me4000_ai_ioctl_sing():Invalid service number\n");
@@ -3188,10 +3172,10 @@
 	return 0;
 }
 
-static int me4000_ai_single(me4000_ai_single_t * arg,
-			    me4000_ai_context_t * ai_context)
+static int me4000_ai_single(struct me4000_ai_single *arg,
+			    struct me4000_ai_context *ai_context)
 {
-	me4000_ai_single_t cmd;
+	struct me4000_ai_single cmd;
 	int err;
 	u32 tmp;
 	wait_queue_head_t queue;
@@ -3202,7 +3186,7 @@
 	init_waitqueue_head(&queue);
 
 	/* Copy data from user */
-	err = copy_from_user(&cmd, arg, sizeof(me4000_ai_single_t));
+	err = copy_from_user(&cmd, arg, sizeof(struct me4000_ai_single));
 	if (err) {
 		printk(KERN_ERR
 		       "ME4000:me4000_ai_single():Can't copy from user space\n");
@@ -3301,7 +3285,7 @@
 	cmd.value = me4000_inl(ai_context->data_reg) & 0xFFFF;
 
 	/* Copy result back to user */
-	err = copy_to_user(arg, &cmd, sizeof(me4000_ai_single_t));
+	err = copy_to_user(arg, &cmd, sizeof(struct me4000_ai_single));
 	if (err) {
 		printk(KERN_ERR
 		       "ME4000:me4000_ai_single():Can't copy to user space\n");
@@ -3314,7 +3298,7 @@
 static int me4000_ai_ioctl_sw(struct inode *inode_p, struct file *file_p,
 			      unsigned int service, unsigned long arg)
 {
-	me4000_ai_context_t *ai_context;
+	struct me4000_ai_context *ai_context;
 
 	CALL_PDEBUG("me4000_ai_ioctl_sw() is executed\n");
 
@@ -3332,9 +3316,11 @@
 
 	switch (service) {
 	case ME4000_AI_SC_SETUP:
-		return me4000_ai_sc_setup((me4000_ai_sc_t *) arg, ai_context);
+		return me4000_ai_sc_setup((struct me4000_ai_sc *)arg,
+								ai_context);
 	case ME4000_AI_CONFIG:
-		return me4000_ai_config((me4000_ai_config_t *) arg, ai_context);
+		return me4000_ai_config((struct me4000_ai_config *)arg,
+								ai_context);
 	case ME4000_AI_START:
 		return me4000_ai_start(ai_context);
 	case ME4000_AI_STOP:
@@ -3344,19 +3330,20 @@
 	case ME4000_AI_FSM_STATE:
 		return me4000_ai_fsm_state((int *)arg, ai_context);
 	case ME4000_GET_USER_INFO:
-		return me4000_get_user_info((me4000_user_info_t *) arg,
+		return me4000_get_user_info((struct me4000_user_info *)arg,
 					    ai_context->board_info);
 	case ME4000_AI_EEPROM_READ:
-		return me4000_eeprom_read((me4000_eeprom_t *) arg, ai_context);
+		return me4000_eeprom_read((struct me4000_eeprom *)arg,
+								ai_context);
 	case ME4000_AI_EEPROM_WRITE:
-		return me4000_eeprom_write((me4000_eeprom_t *) arg, ai_context);
+		return me4000_eeprom_write((struct me4000_eeprom *)arg,
+								ai_context);
 	case ME4000_AI_GET_COUNT_BUFFER:
 		return me4000_ai_get_count_buffer((unsigned long *)arg,
 						  ai_context);
 	default:
 		printk(KERN_ERR
-		       "ME4000:me4000_ai_ioctl_sw():Invalid service number %d\n",
-		       service);
+		       "%s:Invalid service number %d\n", __func__, service);
 		return -ENOTTY;
 	}
 	return 0;
@@ -3365,7 +3352,7 @@
 static int me4000_ai_ioctl_ext(struct inode *inode_p, struct file *file_p,
 			       unsigned int service, unsigned long arg)
 {
-	me4000_ai_context_t *ai_context;
+	struct me4000_ai_context *ai_context;
 
 	CALL_PDEBUG("me4000_ai_ioctl_ext() is executed\n");
 
@@ -3383,9 +3370,11 @@
 
 	switch (service) {
 	case ME4000_AI_SC_SETUP:
-		return me4000_ai_sc_setup((me4000_ai_sc_t *) arg, ai_context);
+		return me4000_ai_sc_setup((struct me4000_ai_sc *)arg,
+								ai_context);
 	case ME4000_AI_CONFIG:
-		return me4000_ai_config((me4000_ai_config_t *) arg, ai_context);
+		return me4000_ai_config((struct me4000_ai_config *)arg,
+								ai_context);
 	case ME4000_AI_START:
 		return me4000_ai_start_ex((unsigned long *)arg, ai_context);
 	case ME4000_AI_STOP:
@@ -3397,20 +3386,19 @@
 	case ME4000_AI_EX_TRIG_DISABLE:
 		return me4000_ai_ex_trig_disable(ai_context);
 	case ME4000_AI_EX_TRIG_SETUP:
-		return me4000_ai_ex_trig_setup((me4000_ai_trigger_t *) arg,
+		return me4000_ai_ex_trig_setup((struct me4000_ai_trigger *)arg,
 					       ai_context);
 	case ME4000_AI_FSM_STATE:
 		return me4000_ai_fsm_state((int *)arg, ai_context);
 	case ME4000_GET_USER_INFO:
-		return me4000_get_user_info((me4000_user_info_t *) arg,
+		return me4000_get_user_info((struct me4000_user_info *)arg,
 					    ai_context->board_info);
 	case ME4000_AI_GET_COUNT_BUFFER:
 		return me4000_ai_get_count_buffer((unsigned long *)arg,
 						  ai_context);
 	default:
 		printk(KERN_ERR
-		       "ME4000:me4000_ai_ioctl_ext():Invalid service number %d\n",
-		       service);
+		       "%s:Invalid service number %d\n", __func__ , service);
 		return -ENOTTY;
 	}
 	return 0;
@@ -3418,7 +3406,7 @@
 
 static int me4000_ai_fasync(int fd, struct file *file_p, int mode)
 {
-	me4000_ai_context_t *ai_context;
+	struct me4000_ai_context *ai_context;
 
 	CALL_PDEBUG("me4000_ao_fasync_cont() is executed\n");
 
@@ -3426,10 +3414,10 @@
 	return fasync_helper(fd, file_p, mode, &ai_context->fasync_p);
 }
 
-static int me4000_ai_config(me4000_ai_config_t * arg,
-			    me4000_ai_context_t * ai_context)
+static int me4000_ai_config(struct me4000_ai_config *arg,
+			    struct me4000_ai_context *ai_context)
 {
-	me4000_ai_config_t cmd;
+	struct me4000_ai_config cmd;
 	u32 *list = NULL;
 	u32 mode;
 	int i;
@@ -3451,7 +3439,7 @@
 	}
 
 	/* Copy data from user */
-	err = copy_from_user(&cmd, arg, sizeof(me4000_ai_config_t));
+	err = copy_from_user(&cmd, arg, sizeof(struct me4000_ai_config));
 	if (err) {
 		printk(KERN_ERR
 		       "ME4000:me4000_ai_config():Can't copy from user space\n");
@@ -3671,7 +3659,7 @@
 
 	return 0;
 
-      AI_CONFIG_ERR:
+AI_CONFIG_ERR:
 
 	/* Reset the timers */
 	ai_context->chan_timer = 66;
@@ -3699,7 +3687,7 @@
 
 }
 
-static int ai_common_start(me4000_ai_context_t * ai_context)
+static int ai_common_start(struct me4000_ai_context *ai_context)
 {
 	u32 tmp;
 	CALL_PDEBUG("ai_common_start() is executed\n");
@@ -3762,7 +3750,7 @@
 	return 0;
 }
 
-static int me4000_ai_start(me4000_ai_context_t * ai_context)
+static int me4000_ai_start(struct me4000_ai_context *ai_context)
 {
 	int err;
 	CALL_PDEBUG("me4000_ai_start() is executed\n");
@@ -3779,7 +3767,7 @@
 }
 
 static int me4000_ai_start_ex(unsigned long *arg,
-			      me4000_ai_context_t * ai_context)
+			      struct me4000_ai_context *ai_context)
 {
 	int err;
 	wait_queue_head_t queue;
@@ -3834,7 +3822,7 @@
 	return 0;
 }
 
-static int me4000_ai_stop(me4000_ai_context_t * ai_context)
+static int me4000_ai_stop(struct me4000_ai_context *ai_context)
 {
 	wait_queue_head_t queue;
 	u32 tmp;
@@ -3871,7 +3859,7 @@
 	return 0;
 }
 
-static int me4000_ai_immediate_stop(me4000_ai_context_t * ai_context)
+static int me4000_ai_immediate_stop(struct me4000_ai_context *ai_context)
 {
 	wait_queue_head_t queue;
 	u32 tmp;
@@ -3908,7 +3896,7 @@
 	return 0;
 }
 
-static int me4000_ai_ex_trig_enable(me4000_ai_context_t * ai_context)
+static int me4000_ai_ex_trig_enable(struct me4000_ai_context *ai_context)
 {
 	u32 tmp;
 	unsigned long flags;
@@ -3924,7 +3912,7 @@
 	return 0;
 }
 
-static int me4000_ai_ex_trig_disable(me4000_ai_context_t * ai_context)
+static int me4000_ai_ex_trig_disable(struct me4000_ai_context *ai_context)
 {
 	u32 tmp;
 	unsigned long flags;
@@ -3940,10 +3928,10 @@
 	return 0;
 }
 
-static int me4000_ai_ex_trig_setup(me4000_ai_trigger_t * arg,
-				   me4000_ai_context_t * ai_context)
+static int me4000_ai_ex_trig_setup(struct me4000_ai_trigger *arg,
+				   struct me4000_ai_context *ai_context)
 {
-	me4000_ai_trigger_t cmd;
+	struct me4000_ai_trigger cmd;
 	int err;
 	u32 tmp;
 	unsigned long flags;
@@ -3951,7 +3939,7 @@
 	CALL_PDEBUG("me4000_ai_ex_trig_setup() is executed\n");
 
 	/* Copy data from user */
-	err = copy_from_user(&cmd, arg, sizeof(me4000_ai_trigger_t));
+	err = copy_from_user(&cmd, arg, sizeof(struct me4000_ai_trigger));
 	if (err) {
 		printk(KERN_ERR
 		       "ME4000:me4000_ai_ex_trig_setup():Can't copy from user space\n");
@@ -4000,16 +3988,16 @@
 	return 0;
 }
 
-static int me4000_ai_sc_setup(me4000_ai_sc_t * arg,
-			      me4000_ai_context_t * ai_context)
+static int me4000_ai_sc_setup(struct me4000_ai_sc *arg,
+			      struct me4000_ai_context *ai_context)
 {
-	me4000_ai_sc_t cmd;
+	struct me4000_ai_sc cmd;
 	int err;
 
 	CALL_PDEBUG("me4000_ai_sc_setup() is executed\n");
 
 	/* Copy data from user */
-	err = copy_from_user(&cmd, arg, sizeof(me4000_ai_sc_t));
+	err = copy_from_user(&cmd, arg, sizeof(struct me4000_ai_sc));
 	if (err) {
 		printk(KERN_ERR
 		       "ME4000:me4000_ai_sc_setup():Can't copy from user space\n");
@@ -4023,9 +4011,9 @@
 }
 
 static ssize_t me4000_ai_read(struct file *filep, char *buff, size_t cnt,
-			      loff_t * offp)
+			      loff_t *offp)
 {
-	me4000_ai_context_t *ai_context = filep->private_data;
+	struct me4000_ai_context *ai_context = filep->private_data;
 	s16 *buffer = (s16 *) buff;
 	size_t count = cnt / 2;
 	unsigned long flags;
@@ -4150,9 +4138,9 @@
 	return ret * 2;
 }
 
-static unsigned int me4000_ai_poll(struct file *file_p, poll_table * wait)
+static unsigned int me4000_ai_poll(struct file *file_p, poll_table *wait)
 {
-	me4000_ai_context_t *ai_context;
+	struct me4000_ai_context *ai_context;
 	unsigned long mask = 0;
 
 	CALL_PDEBUG("me4000_ai_poll() is executed\n");
@@ -4171,7 +4159,7 @@
 	return mask;
 }
 
-static int me4000_ai_offset_enable(me4000_ai_context_t * ai_context)
+static int me4000_ai_offset_enable(struct me4000_ai_context *ai_context)
 {
 	unsigned long tmp;
 
@@ -4184,7 +4172,7 @@
 	return 0;
 }
 
-static int me4000_ai_offset_disable(me4000_ai_context_t * ai_context)
+static int me4000_ai_offset_disable(struct me4000_ai_context *ai_context)
 {
 	unsigned long tmp;
 
@@ -4197,7 +4185,7 @@
 	return 0;
 }
 
-static int me4000_ai_fullscale_enable(me4000_ai_context_t * ai_context)
+static int me4000_ai_fullscale_enable(struct me4000_ai_context *ai_context)
 {
 	unsigned long tmp;
 
@@ -4210,7 +4198,7 @@
 	return 0;
 }
 
-static int me4000_ai_fullscale_disable(me4000_ai_context_t * ai_context)
+static int me4000_ai_fullscale_disable(struct me4000_ai_context *ai_context)
 {
 	unsigned long tmp;
 
@@ -4223,7 +4211,7 @@
 	return 0;
 }
 
-static int me4000_ai_fsm_state(int *arg, me4000_ai_context_t * ai_context)
+static int me4000_ai_fsm_state(int *arg, struct me4000_ai_context *ai_context)
 {
 	unsigned long tmp;
 
@@ -4242,7 +4230,7 @@
 }
 
 static int me4000_ai_get_count_buffer(unsigned long *arg,
-				      me4000_ai_context_t * ai_context)
+				      struct me4000_ai_context *ai_context)
 {
 	unsigned long c;
 	int err;
@@ -4252,7 +4240,7 @@
 	err = copy_to_user(arg, &c, sizeof(unsigned long));
 	if (err) {
 		printk(KERN_ERR
-		       "ME4000:me4000_ai_get_count_buffer():Can't copy to user space\n");
+		       "%s:Can't copy to user space\n", __func__);
 		return -EFAULT;
 	}
 
@@ -4261,7 +4249,7 @@
 
 /*---------------------------------- EEPROM stuff ---------------------------*/
 
-static int eeprom_write_cmd(me4000_ai_context_t * ai_context, unsigned long cmd,
+static int eeprom_write_cmd(struct me4000_ai_context *ai_context, unsigned long cmd,
 			    int length)
 {
 	int i;
@@ -4318,7 +4306,7 @@
 	return 0;
 }
 
-static unsigned short eeprom_read_cmd(me4000_ai_context_t * ai_context,
+static unsigned short eeprom_read_cmd(struct me4000_ai_context *ai_context,
 				      unsigned long cmd, int length)
 {
 	int i;
@@ -4397,11 +4385,11 @@
 	return id;
 }
 
-static int me4000_eeprom_write(me4000_eeprom_t * arg,
-			       me4000_ai_context_t * ai_context)
+static int me4000_eeprom_write(struct me4000_eeprom *arg,
+			       struct me4000_ai_context *ai_context)
 {
 	int err;
-	me4000_eeprom_t setup;
+	struct me4000_eeprom setup;
 	unsigned long cmd;
 	unsigned long date_high;
 	unsigned long date_low;
@@ -4594,12 +4582,12 @@
 	return 0;
 }
 
-static int me4000_eeprom_read(me4000_eeprom_t * arg,
-			      me4000_ai_context_t * ai_context)
+static int me4000_eeprom_read(struct me4000_eeprom *arg,
+			      struct me4000_ai_context *ai_context)
 {
 	int err;
 	unsigned long cmd;
-	me4000_eeprom_t setup;
+	struct me4000_eeprom setup;
 
 	CALL_PDEBUG("me4000_eeprom_read() is executed\n");
 
@@ -4687,7 +4675,7 @@
 static int me4000_dio_ioctl(struct inode *inode_p, struct file *file_p,
 			    unsigned int service, unsigned long arg)
 {
-	me4000_dio_context_t *dio_context;
+	struct me4000_dio_context *dio_context;
 
 	CALL_PDEBUG("me4000_dio_ioctl() is executed\n");
 
@@ -4704,13 +4692,13 @@
 
 	switch (service) {
 	case ME4000_DIO_CONFIG:
-		return me4000_dio_config((me4000_dio_config_t *) arg,
+		return me4000_dio_config((struct me4000_dio_config *)arg,
 					 dio_context);
 	case ME4000_DIO_SET_BYTE:
-		return me4000_dio_set_byte((me4000_dio_byte_t *) arg,
+		return me4000_dio_set_byte((struct me4000_dio_byte *)arg,
 					   dio_context);
 	case ME4000_DIO_GET_BYTE:
-		return me4000_dio_get_byte((me4000_dio_byte_t *) arg,
+		return me4000_dio_get_byte((struct me4000_dio_byte *)arg,
 					   dio_context);
 	case ME4000_DIO_RESET:
 		return me4000_dio_reset(dio_context);
@@ -4723,17 +4711,17 @@
 	return 0;
 }
 
-static int me4000_dio_config(me4000_dio_config_t * arg,
-			     me4000_dio_context_t * dio_context)
+static int me4000_dio_config(struct me4000_dio_config *arg,
+			     struct me4000_dio_context *dio_context)
 {
-	me4000_dio_config_t cmd;
+	struct me4000_dio_config cmd;
 	u32 tmp;
 	int err;
 
 	CALL_PDEBUG("me4000_dio_config() is executed\n");
 
 	/* Copy data from user */
-	err = copy_from_user(&cmd, arg, sizeof(me4000_dio_config_t));
+	err = copy_from_user(&cmd, arg, sizeof(struct me4000_dio_config));
 	if (err) {
 		printk(KERN_ERR
 		       "ME4000:me4000_dio_config():Can't copy from user space\n");
@@ -4964,16 +4952,16 @@
 	return 0;
 }
 
-static int me4000_dio_set_byte(me4000_dio_byte_t * arg,
-			       me4000_dio_context_t * dio_context)
+static int me4000_dio_set_byte(struct me4000_dio_byte *arg,
+			       struct me4000_dio_context *dio_context)
 {
-	me4000_dio_byte_t cmd;
+	struct me4000_dio_byte cmd;
 	int err;
 
 	CALL_PDEBUG("me4000_dio_set_byte() is executed\n");
 
 	/* Copy data from user */
-	err = copy_from_user(&cmd, arg, sizeof(me4000_dio_byte_t));
+	err = copy_from_user(&cmd, arg, sizeof(struct me4000_dio_byte));
 	if (err) {
 		printk(KERN_ERR
 		       "ME4000:me4000_dio_set_byte():Can't copy from user space\n");
@@ -5030,16 +5018,16 @@
 	return 0;
 }
 
-static int me4000_dio_get_byte(me4000_dio_byte_t * arg,
-			       me4000_dio_context_t * dio_context)
+static int me4000_dio_get_byte(struct me4000_dio_byte *arg,
+			       struct me4000_dio_context *dio_context)
 {
-	me4000_dio_byte_t cmd;
+	struct me4000_dio_byte cmd;
 	int err;
 
 	CALL_PDEBUG("me4000_dio_get_byte() is executed\n");
 
 	/* Copy data from user */
-	err = copy_from_user(&cmd, arg, sizeof(me4000_dio_byte_t));
+	err = copy_from_user(&cmd, arg, sizeof(struct me4000_dio_byte));
 	if (err) {
 		printk(KERN_ERR
 		       "ME4000:me4000_dio_get_byte():Can't copy from user space\n");
@@ -5070,7 +5058,7 @@
 	}
 
 	/* Copy result back to user */
-	err = copy_to_user(arg, &cmd, sizeof(me4000_dio_byte_t));
+	err = copy_to_user(arg, &cmd, sizeof(struct me4000_dio_byte));
 	if (err) {
 		printk(KERN_ERR
 		       "ME4000:me4000_dio_get_byte():Can't copy to user space\n");
@@ -5080,7 +5068,7 @@
 	return 0;
 }
 
-static int me4000_dio_reset(me4000_dio_context_t * dio_context)
+static int me4000_dio_reset(struct me4000_dio_context *dio_context)
 {
 	CALL_PDEBUG("me4000_dio_reset() is executed\n");
 
@@ -5101,7 +5089,7 @@
 static int me4000_cnt_ioctl(struct inode *inode_p, struct file *file_p,
 			    unsigned int service, unsigned long arg)
 {
-	me4000_cnt_context_t *cnt_context;
+	struct me4000_cnt_context *cnt_context;
 
 	CALL_PDEBUG("me4000_cnt_ioctl() is executed\n");
 
@@ -5118,11 +5106,11 @@
 
 	switch (service) {
 	case ME4000_CNT_READ:
-		return me4000_cnt_read((me4000_cnt_t *) arg, cnt_context);
+		return me4000_cnt_read((struct me4000_cnt *)arg, cnt_context);
 	case ME4000_CNT_WRITE:
-		return me4000_cnt_write((me4000_cnt_t *) arg, cnt_context);
+		return me4000_cnt_write((struct me4000_cnt *)arg, cnt_context);
 	case ME4000_CNT_CONFIG:
-		return me4000_cnt_config((me4000_cnt_config_t *) arg,
+		return me4000_cnt_config((struct me4000_cnt_config *)arg,
 					 cnt_context);
 	case ME4000_CNT_RESET:
 		return me4000_cnt_reset(cnt_context);
@@ -5135,10 +5123,10 @@
 	return 0;
 }
 
-static int me4000_cnt_config(me4000_cnt_config_t * arg,
-			     me4000_cnt_context_t * cnt_context)
+static int me4000_cnt_config(struct me4000_cnt_config *arg,
+			     struct me4000_cnt_context *cnt_context)
 {
-	me4000_cnt_config_t cmd;
+	struct me4000_cnt_config cmd;
 	u8 counter;
 	u8 mode;
 	int err;
@@ -5146,7 +5134,7 @@
 	CALL_PDEBUG("me4000_cnt_config() is executed\n");
 
 	/* Copy data from user */
-	err = copy_from_user(&cmd, arg, sizeof(me4000_cnt_config_t));
+	err = copy_from_user(&cmd, arg, sizeof(struct me4000_cnt_config));
 	if (err) {
 		printk(KERN_ERR
 		       "ME4000:me4000_cnt_config():Can't copy from user space\n");
@@ -5204,17 +5192,17 @@
 	return 0;
 }
 
-static int me4000_cnt_read(me4000_cnt_t * arg,
-			   me4000_cnt_context_t * cnt_context)
+static int me4000_cnt_read(struct me4000_cnt *arg,
+			   struct me4000_cnt_context *cnt_context)
 {
-	me4000_cnt_t cmd;
+	struct me4000_cnt cmd;
 	u8 tmp;
 	int err;
 
 	CALL_PDEBUG("me4000_cnt_read() is executed\n");
 
 	/* Copy data from user */
-	err = copy_from_user(&cmd, arg, sizeof(me4000_cnt_t));
+	err = copy_from_user(&cmd, arg, sizeof(struct me4000_cnt));
 	if (err) {
 		printk(KERN_ERR
 		       "ME4000:me4000_cnt_read():Can't copy from user space\n");
@@ -5249,7 +5237,7 @@
 	}
 
 	/* Copy result back to user */
-	err = copy_to_user(arg, &cmd, sizeof(me4000_cnt_t));
+	err = copy_to_user(arg, &cmd, sizeof(struct me4000_cnt));
 	if (err) {
 		printk(KERN_ERR
 		       "ME4000:me4000_cnt_read():Can't copy to user space\n");
@@ -5259,17 +5247,17 @@
 	return 0;
 }
 
-static int me4000_cnt_write(me4000_cnt_t * arg,
-			    me4000_cnt_context_t * cnt_context)
+static int me4000_cnt_write(struct me4000_cnt *arg,
+			    struct me4000_cnt_context *cnt_context)
 {
-	me4000_cnt_t cmd;
+	struct me4000_cnt cmd;
 	u8 tmp;
 	int err;
 
 	CALL_PDEBUG("me4000_cnt_write() is executed\n");
 
 	/* Copy data from user */
-	err = copy_from_user(&cmd, arg, sizeof(me4000_cnt_t));
+	err = copy_from_user(&cmd, arg, sizeof(struct me4000_cnt));
 	if (err) {
 		printk(KERN_ERR
 		       "ME4000:me4000_cnt_write():Can't copy from user space\n");
@@ -5306,7 +5294,7 @@
 	return 0;
 }
 
-static int me4000_cnt_reset(me4000_cnt_context_t * cnt_context)
+static int me4000_cnt_reset(struct me4000_cnt_context *cnt_context)
 {
 	CALL_PDEBUG("me4000_cnt_reset() is executed\n");
 
@@ -5333,7 +5321,7 @@
 static int me4000_ext_int_ioctl(struct inode *inode_p, struct file *file_p,
 				unsigned int service, unsigned long arg)
 {
-	me4000_ext_int_context_t *ext_int_context;
+	struct me4000_ext_int_context *ext_int_context;
 
 	CALL_PDEBUG("me4000_ext_int_ioctl() is executed\n");
 
@@ -5366,7 +5354,7 @@
 	return 0;
 }
 
-static int me4000_ext_int_enable(me4000_ext_int_context_t * ext_int_context)
+static int me4000_ext_int_enable(struct me4000_ext_int_context *ext_int_context)
 {
 	unsigned long tmp;
 
@@ -5379,7 +5367,7 @@
 	return 0;
 }
 
-static int me4000_ext_int_disable(me4000_ext_int_context_t * ext_int_context)
+static int me4000_ext_int_disable(struct me4000_ext_int_context *ext_int_context)
 {
 	unsigned long tmp;
 
@@ -5393,7 +5381,7 @@
 }
 
 static int me4000_ext_int_count(unsigned long *arg,
-				me4000_ext_int_context_t * ext_int_context)
+				struct me4000_ext_int_context *ext_int_context)
 {
 
 	CALL_PDEBUG("me4000_ext_int_count() is executed\n");
@@ -5404,10 +5392,10 @@
 
 /*------------------------------------ General stuff ------------------------------------*/
 
-static int me4000_get_user_info(me4000_user_info_t * arg,
-				me4000_info_t * board_info)
+static int me4000_get_user_info(struct me4000_user_info *arg,
+				struct me4000_info *board_info)
 {
-	me4000_user_info_t user_info;
+	struct me4000_user_info user_info;
 
 	CALL_PDEBUG("me4000_get_user_info() is executed\n");
 
@@ -5437,7 +5425,7 @@
 
 	user_info.cnt_count = board_info->board_p->cnt.count;
 
-	if (copy_to_user(arg, &user_info, sizeof(me4000_user_info_t)))
+	if (copy_to_user(arg, &user_info, sizeof(struct me4000_user_info)))
 		return -EFAULT;
 
 	return 0;
@@ -5448,7 +5436,7 @@
 static int me4000_ext_int_fasync(int fd, struct file *file_ptr, int mode)
 {
 	int result = 0;
-	me4000_ext_int_context_t *ext_int_context;
+	struct me4000_ext_int_context *ext_int_context;
 
 	CALL_PDEBUG("me4000_ext_int_fasync() is executed\n");
 
@@ -5465,7 +5453,7 @@
 {
 	u32 tmp;
 	u32 value;
-	me4000_ao_context_t *ao_context;
+	struct me4000_ao_context *ao_context;
 	int i;
 	int c = 0;
 	int c1 = 0;
@@ -5589,7 +5577,7 @@
 static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
 {
 	u32 tmp;
-	me4000_ai_context_t *ai_context;
+	struct me4000_ai_context *ai_context;
 	int i;
 	int c = 0;
 	int c1 = 0;
@@ -5933,7 +5921,7 @@
 
 static irqreturn_t me4000_ext_int_isr(int irq, void *dev_id)
 {
-	me4000_ext_int_context_t *ext_int_context;
+	struct me4000_ext_int_context *ext_int_context;
 	unsigned long tmp;
 
 	ISR_PDEBUG("me4000_ext_int_isr() is executed\n");
@@ -5969,10 +5957,10 @@
 	return IRQ_HANDLED;
 }
 
-void __exit me4000_module_exit(void)
+static void __exit me4000_module_exit(void)
 {
 	struct list_head *board_p;
-	me4000_info_t *board_info;
+	struct me4000_info *board_info;
 
 	CALL_PDEBUG("cleanup_module() is executed\n");
 
@@ -5993,7 +5981,7 @@
 	/* Reset the boards */
 	for (board_p = me4000_board_info_list.next;
 	     board_p != &me4000_board_info_list; board_p = board_p->next) {
-		board_info = list_entry(board_p, me4000_info_t, list);
+		board_info = list_entry(board_p, struct me4000_info, list);
 		me4000_reset_board(board_info);
 	}
 
@@ -6007,7 +5995,7 @@
 {
 	int len = 0;
 	int limit = count - 1000;
-	me4000_info_t *board_info;
+	struct me4000_info *board_info;
 	struct list_head *ptr;
 
 	len += sprintf(buf + len, "\nME4000 DRIVER VERSION %X.%X.%X\n\n",
@@ -6019,7 +6007,7 @@
 	for (ptr = me4000_board_info_list.next;
 	     (ptr != &me4000_board_info_list) && (len < limit);
 	     ptr = ptr->next) {
-		board_info = list_entry(ptr, me4000_info_t, list);
+		board_info = list_entry(ptr, struct me4000_info, list);
 
 		len +=
 		    sprintf(buf + len, "Board number %d:\n",
@@ -6029,14 +6017,14 @@
 		    sprintf(buf + len, "PLX base register = 0x%lX\n",
 			    board_info->plx_regbase);
 		len +=
-		    sprintf(buf + len, "PLX base register size = 0x%lX\n",
-			    board_info->plx_regbase_size);
+		    sprintf(buf + len, "PLX base register size = 0x%X\n",
+			    (unsigned int)board_info->plx_regbase_size);
 		len +=
-		    sprintf(buf + len, "ME4000 base register = 0x%lX\n",
-			    board_info->me4000_regbase);
+		    sprintf(buf + len, "ME4000 base register = 0x%X\n",
+			    (unsigned int)board_info->me4000_regbase);
 		len +=
-		    sprintf(buf + len, "ME4000 base register size = 0x%lX\n",
-			    board_info->me4000_regbase_size);
+		    sprintf(buf + len, "ME4000 base register size = 0x%X\n",
+			    (unsigned int)board_info->me4000_regbase_size);
 		len +=
 		    sprintf(buf + len, "Serial number = 0x%X\n",
 			    board_info->serial_no);
diff --git a/drivers/staging/me4000/me4000.h b/drivers/staging/me4000/me4000.h
index c35e4b9..81c6f4d5 100644
--- a/drivers/staging/me4000/me4000.h
+++ b/drivers/staging/me4000/me4000.h
@@ -329,46 +329,46 @@
   Circular buffer used for analog input/output reads/writes.
   ===========================================================================*/
 
-typedef struct me4000_circ_buf {
+struct me4000_circ_buf {
 	s16 *buf;
 	int volatile head;
 	int volatile tail;
-} me4000_circ_buf_t;
+};
 
 /*=============================================================================
   Information about the hardware capabilities
   ===========================================================================*/
 
-typedef struct me4000_ao_info {
+struct me4000_ao_info {
 	int count;
 	int fifo_count;
-} me4000_ao_info_t;
+};
 
-typedef struct me4000_ai_info {
+struct me4000_ai_info {
 	int count;
 	int sh_count;
 	int diff_count;
 	int ex_trig_analog;
-} me4000_ai_info_t;
+};
 
-typedef struct me4000_dio_info {
+struct me4000_dio_info {
 	int count;
-} me4000_dio_info_t;
+};
 
-typedef struct me4000_cnt_info {
+struct me4000_cnt_info {
 	int count;
-} me4000_cnt_info_t;
+};
 
-typedef struct me4000_board {
+struct me4000_board {
 	u16 vendor_id;
 	u16 device_id;
-	me4000_ao_info_t ao;
-	me4000_ai_info_t ai;
-	me4000_dio_info_t dio;
-	me4000_cnt_info_t cnt;
-} me4000_board_t;
+	struct me4000_ao_info ao;
+	struct me4000_ai_info ai;
+	struct me4000_dio_info dio;
+	struct me4000_cnt_info cnt;
+};
 
-static me4000_board_t me4000_boards[] = {
+static struct me4000_board me4000_boards[] = {
 	{PCI_VENDOR_ID_MEILHAUS, 0x4610, {0, 0}, {16, 0, 0, 0}, {4}, {3}},
 
 	{PCI_VENDOR_ID_MEILHAUS, 0x4650, {0, 0}, {16, 0, 0, 0}, {4}, {0}},
@@ -391,8 +391,6 @@
 	{0},
 };
 
-#define ME4000_BOARD_VERSIONS (sizeof(me4000_boards) / sizeof(me4000_board_t) - 1)
-
 /*=============================================================================
   PCI device table.
   This is used by modprobe to translate PCI IDs to drivers.
@@ -427,19 +425,19 @@
   Global board and subdevice information structures
   ===========================================================================*/
 
-typedef struct me4000_info {
+struct me4000_info {
 	struct list_head list;	// List of all detected boards
 	int board_count;	// Index of the board after detection
 
 	unsigned long plx_regbase;	// PLX configuration space base address
-	unsigned long me4000_regbase;	// Base address of the ME4000
-	unsigned long timer_regbase;	// Base address of the timer circuit
-	unsigned long program_regbase;	// Base address to set the program pin for the xilinx
+	resource_size_t me4000_regbase;	// Base address of the ME4000
+	resource_size_t timer_regbase;	// Base address of the timer circuit
+	resource_size_t program_regbase;	// Base address to set the program pin for the xilinx
 
 	unsigned long plx_regbase_size;	// PLX register set space
-	unsigned long me4000_regbase_size;	// ME4000 register set space
-	unsigned long timer_regbase_size;	// Timer circuit register set space
-	unsigned long program_regbase_size;	// Size of program base address of the ME4000
+	resource_size_t me4000_regbase_size;	// ME4000 register set space
+	resource_size_t timer_regbase_size;	// Timer circuit register set space
+	resource_size_t program_regbase_size;	// Size of program base address of the ME4000
 
 	unsigned int serial_no;	// Serial number of the board
 	unsigned char hw_revision;	// Hardware revision of the board
@@ -451,7 +449,7 @@
 	int pci_func_no;	// PCI function number
 	struct pci_dev *pci_dev_p;	// General PCI information
 
-	me4000_board_t *board_p;	// Holds the board capabilities
+	struct me4000_board *board_p;	// Holds the board capabilities
 
 	unsigned int irq;	// IRQ assigned from the PCI BIOS
 	unsigned int irq_count;	// Count of external interrupts
@@ -464,18 +462,18 @@
 	struct me4000_dio_context *dio_context;	// Digital I/O specific context
 	struct me4000_cnt_context *cnt_context;	// Counter specific context
 	struct me4000_ext_int_context *ext_int_context;	// External interrupt specific context
-} me4000_info_t;
+};
 
-typedef struct me4000_ao_context {
+struct me4000_ao_context {
 	struct list_head list;	// linked list of me4000_ao_context_t
 	int index;		// Index in the list
 	int mode;		// Indicates mode (0 = single, 1 = wraparound, 2 = continous)
 	int dac_in_use;		// Indicates if already opend
 	spinlock_t use_lock;	// Guards in_use
 	spinlock_t int_lock;	// Used when locking out interrupts
-	me4000_circ_buf_t circ_buf;	// Circular buffer
+	struct me4000_circ_buf circ_buf;	// Circular buffer
 	wait_queue_head_t wait_queue;	// Wait queue to sleep while blocking write
-	me4000_info_t *board_info;
+	struct me4000_info *board_info;
 	unsigned int irq;	// The irq associated with this ADC
 	int volatile pipe_flag;	// Indicates broken pipe set from me4000_ao_isr()
 	unsigned long ctrl_reg;
@@ -486,9 +484,9 @@
 	unsigned long irq_status_reg;
 	unsigned long preload_reg;
 	struct fasync_struct *fasync_p;	// Queue for asynchronous notification
-} me4000_ao_context_t;
+};
 
-typedef struct me4000_ai_context {
+struct me4000_ai_context {
 	struct list_head list;	// linked list of me4000_ai_info_t
 	int mode;		// Indicates mode
 	int in_use;		// Indicates if already opend
@@ -496,9 +494,9 @@
 	spinlock_t int_lock;	// Used when locking out interrupts
 	int number;		// Number of the DAC
 	unsigned int irq;	// The irq associated with this ADC
-	me4000_circ_buf_t circ_buf;	// Circular buffer
+	struct me4000_circ_buf circ_buf;	// Circular buffer
 	wait_queue_head_t wait_queue;	// Wait queue to sleep while blocking read
-	me4000_info_t *board_info;
+	struct me4000_info *board_info;
 
 	struct fasync_struct *fasync_p;	// Queue for asynchronous notification
 
@@ -523,48 +521,48 @@
 	unsigned long channel_list_count;
 	unsigned long sample_counter;
 	int sample_counter_reload;
-} me4000_ai_context_t;
+};
 
-typedef struct me4000_dio_context {
+struct me4000_dio_context {
 	struct list_head list;	// linked list of me4000_dio_context_t
 	int in_use;		// Indicates if already opend
 	spinlock_t use_lock;	// Guards in_use
 	int number;
 	int dio_count;
-	me4000_info_t *board_info;
+	struct me4000_info *board_info;
 	unsigned long dir_reg;
 	unsigned long ctrl_reg;
 	unsigned long port_0_reg;
 	unsigned long port_1_reg;
 	unsigned long port_2_reg;
 	unsigned long port_3_reg;
-} me4000_dio_context_t;
+};
 
-typedef struct me4000_cnt_context {
+struct me4000_cnt_context {
 	struct list_head list;	// linked list of me4000_dio_context_t
 	int in_use;		// Indicates if already opend
 	spinlock_t use_lock;	// Guards in_use
 	int number;
 	int cnt_count;
-	me4000_info_t *board_info;
+	struct me4000_info *board_info;
 	unsigned long ctrl_reg;
 	unsigned long counter_0_reg;
 	unsigned long counter_1_reg;
 	unsigned long counter_2_reg;
-} me4000_cnt_context_t;
+};
 
-typedef struct me4000_ext_int_context {
+struct me4000_ext_int_context {
 	struct list_head list;	// linked list of me4000_dio_context_t
 	int in_use;		// Indicates if already opend
 	spinlock_t use_lock;	// Guards in_use
 	int number;
-	me4000_info_t *board_info;
+	struct me4000_info *board_info;
 	unsigned int irq;
 	unsigned long int_count;
 	struct fasync_struct *fasync_ptr;
 	unsigned long ctrl_reg;
 	unsigned long irq_status_reg;
-} me4000_ext_int_context_t;
+};
 
 #endif
 
@@ -745,12 +743,12 @@
   General type definitions
   ----------------------------------------------------------------------------*/
 
-typedef struct me4000_user_info {
+struct me4000_user_info {
 	int board_count;	// Index of the board after detection
 	unsigned long plx_regbase;	// PLX configuration space base address
-	unsigned long me4000_regbase;	// Base address of the ME4000
+	resource_size_t me4000_regbase;	// Base address of the ME4000
 	unsigned long plx_regbase_size;	// PLX register set space
-	unsigned long me4000_regbase_size;	// ME4000 register set space
+	resource_size_t me4000_regbase_size;	// ME4000 register set space
 	unsigned long serial_no;	// Serial number of the board
 	unsigned char hw_revision;	// Hardware revision of the board
 	unsigned short vendor_id;	// Meilhaus vendor id (0x1402)
@@ -773,62 +771,62 @@
 	int dio_count;		// Count of digital I/O ports
 
 	int cnt_count;		// Count of counters
-} me4000_user_info_t;
+};
 
 /*-----------------------------------------------------------------------------
   Type definitions for analog output
   ----------------------------------------------------------------------------*/
 
-typedef struct me4000_ao_channel_list {
+struct me4000_ao_channel_list {
 	unsigned long count;
 	unsigned long *list;
-} me4000_ao_channel_list_t;
+};
 
 /*-----------------------------------------------------------------------------
   Type definitions for analog input
   ----------------------------------------------------------------------------*/
 
-typedef struct me4000_ai_channel_list {
+struct me4000_ai_channel_list {
 	unsigned long count;
 	unsigned long *list;
-} me4000_ai_channel_list_t;
+};
 
-typedef struct me4000_ai_timer {
+struct me4000_ai_timer {
 	unsigned long pre_chan;
 	unsigned long chan;
 	unsigned long scan_low;
 	unsigned long scan_high;
-} me4000_ai_timer_t;
+};
 
-typedef struct me4000_ai_config {
-	me4000_ai_timer_t timer;
-	me4000_ai_channel_list_t channel_list;
+struct me4000_ai_config {
+	struct me4000_ai_timer timer;
+	struct me4000_ai_channel_list channel_list;
 	int sh;
-} me4000_ai_config_t;
+};
 
-typedef struct me4000_ai_single {
+struct me4000_ai_single {
 	int channel;
 	int range;
 	int mode;
 	short value;
 	unsigned long timeout;
-} me4000_ai_single_t;
+};
 
-typedef struct me4000_ai_trigger {
+struct me4000_ai_trigger {
 	int mode;
 	int edge;
-} me4000_ai_trigger_t;
+};
 
-typedef struct me4000_ai_sc {
+struct me4000_ai_sc {
 	unsigned long value;
 	int reload;
-} me4000_ai_sc_t;
+};
 
 /*-----------------------------------------------------------------------------
   Type definitions for eeprom
   ----------------------------------------------------------------------------*/
 
-typedef struct me4000_eeprom {
+struct me4000_eeprom {
 	unsigned long date;
 	short uni_10_offset;
 	short uni_10_fullscale;
@@ -842,45 +840,45 @@
 	short diff_10_fullscale;
 	short diff_2_5_offset;
 	short diff_2_5_fullscale;
-} me4000_eeprom_t;
+};
 
 /*-----------------------------------------------------------------------------
   Type definitions for digital I/O
   ----------------------------------------------------------------------------*/
 
-typedef struct me4000_dio_config {
+struct me4000_dio_config {
 	int port;
 	int mode;
 	int function;
-} me4000_dio_config_t;
+};
 
-typedef struct me4000_dio_byte {
+struct me4000_dio_byte {
 	int port;
 	unsigned char byte;
-} me4000_dio_byte_t;
+};
 
 /*-----------------------------------------------------------------------------
   Type definitions for counters
   ----------------------------------------------------------------------------*/
 
-typedef struct me4000_cnt {
+struct me4000_cnt {
 	int counter;
 	unsigned short value;
-} me4000_cnt_t;
+};
 
-typedef struct me4000_cnt_config {
+struct me4000_cnt_config {
 	int counter;
 	int mode;
-} me4000_cnt_config_t;
+};
 
 /*-----------------------------------------------------------------------------
   Type definitions for external interrupt
   ----------------------------------------------------------------------------*/
 
-typedef struct {
+struct me4000_int {
 	int int1_count;
 	int int2_count;
-} me4000_int_type;
+};
 
 /*-----------------------------------------------------------------------------
   The ioctls of the board
@@ -888,7 +886,8 @@
 
 #define ME4000_IOCTL_MAXNR 50
 #define ME4000_MAGIC 'y'
-#define ME4000_GET_USER_INFO          _IOR (ME4000_MAGIC, 0, me4000_user_info_t)
+#define ME4000_GET_USER_INFO          _IOR (ME4000_MAGIC, 0, \
+					    struct me4000_user_info)
 
 #define ME4000_AO_START               _IOW (ME4000_MAGIC, 1, unsigned long)
 #define ME4000_AO_STOP                _IO  (ME4000_MAGIC, 2)
@@ -904,25 +903,35 @@
 #define ME4000_AO_DISABLE_DO          _IO  (ME4000_MAGIC, 12)
 #define ME4000_AO_FSM_STATE           _IOR (ME4000_MAGIC, 13, int)
 
-#define ME4000_AI_SINGLE              _IOR (ME4000_MAGIC, 14, me4000_ai_single_t)
+#define ME4000_AI_SINGLE              _IOR (ME4000_MAGIC, 14, \
+					    struct me4000_ai_single)
 #define ME4000_AI_START               _IOW (ME4000_MAGIC, 15, unsigned long)
 #define ME4000_AI_STOP                _IO  (ME4000_MAGIC, 16)
 #define ME4000_AI_IMMEDIATE_STOP      _IO  (ME4000_MAGIC, 17)
 #define ME4000_AI_EX_TRIG_ENABLE      _IO  (ME4000_MAGIC, 18)
 #define ME4000_AI_EX_TRIG_DISABLE     _IO  (ME4000_MAGIC, 19)
-#define ME4000_AI_EX_TRIG_SETUP       _IOW (ME4000_MAGIC, 20, me4000_ai_trigger_t)
-#define ME4000_AI_CONFIG              _IOW (ME4000_MAGIC, 21, me4000_ai_config_t)
-#define ME4000_AI_SC_SETUP            _IOW (ME4000_MAGIC, 22, me4000_ai_sc_t)
+#define ME4000_AI_EX_TRIG_SETUP       _IOW (ME4000_MAGIC, 20, \
+					    struct me4000_ai_trigger)
+#define ME4000_AI_CONFIG              _IOW (ME4000_MAGIC, 21, \
+					    struct me4000_ai_config)
+#define ME4000_AI_SC_SETUP            _IOW (ME4000_MAGIC, 22, \
+					    struct me4000_ai_sc)
 #define ME4000_AI_FSM_STATE           _IOR (ME4000_MAGIC, 23, int)
 
-#define ME4000_DIO_CONFIG             _IOW (ME4000_MAGIC, 24, me4000_dio_config_t)
-#define ME4000_DIO_GET_BYTE           _IOR (ME4000_MAGIC, 25, me4000_dio_byte_t)
-#define ME4000_DIO_SET_BYTE           _IOW (ME4000_MAGIC, 26, me4000_dio_byte_t)
+#define ME4000_DIO_CONFIG             _IOW (ME4000_MAGIC, 24, \
+					    struct me4000_dio_config)
+#define ME4000_DIO_GET_BYTE           _IOR (ME4000_MAGIC, 25, \
+					    struct me4000_dio_byte)
+#define ME4000_DIO_SET_BYTE           _IOW (ME4000_MAGIC, 26, \
+					    struct me4000_dio_byte)
 #define ME4000_DIO_RESET              _IO  (ME4000_MAGIC, 27)
 
-#define ME4000_CNT_READ               _IOR (ME4000_MAGIC, 28, me4000_cnt_t)
-#define ME4000_CNT_WRITE              _IOW (ME4000_MAGIC, 29, me4000_cnt_t)
-#define ME4000_CNT_CONFIG             _IOW (ME4000_MAGIC, 30, me4000_cnt_config_t)
+#define ME4000_CNT_READ               _IOR (ME4000_MAGIC, 28, \
+					    struct me4000_cnt)
+#define ME4000_CNT_WRITE              _IOW (ME4000_MAGIC, 29, \
+					    struct me4000_cnt)
+#define ME4000_CNT_CONFIG             _IOW (ME4000_MAGIC, 30, \
+					    struct me4000_cnt_config)
 #define ME4000_CNT_RESET              _IO  (ME4000_MAGIC, 31)
 
 #define ME4000_EXT_INT_DISABLE        _IO  (ME4000_MAGIC, 32)
@@ -934,13 +943,16 @@
 #define ME4000_AI_FULLSCALE_ENABLE    _IO  (ME4000_MAGIC, 37)
 #define ME4000_AI_FULLSCALE_DISABLE   _IO  (ME4000_MAGIC, 38)
 
-#define ME4000_AI_EEPROM_READ         _IOR (ME4000_MAGIC, 39, me4000_eeprom_t)
-#define ME4000_AI_EEPROM_WRITE        _IOW (ME4000_MAGIC, 40, me4000_eeprom_t)
+#define ME4000_AI_EEPROM_READ         _IOR (ME4000_MAGIC, 39, \
+					    struct me4000_eeprom)
+#define ME4000_AI_EEPROM_WRITE        _IOW (ME4000_MAGIC, 40, \
+					    struct me4000_eeprom)
 
 #define ME4000_AO_SIMULTANEOUS_EX_TRIG _IO  (ME4000_MAGIC, 41)
 #define ME4000_AO_SIMULTANEOUS_SW      _IO  (ME4000_MAGIC, 42)
 #define ME4000_AO_SIMULTANEOUS_DISABLE _IO  (ME4000_MAGIC, 43)
-#define ME4000_AO_SIMULTANEOUS_UPDATE  _IOW (ME4000_MAGIC, 44, me4000_ao_channel_list_t)
+#define ME4000_AO_SIMULTANEOUS_UPDATE  _IOW (ME4000_MAGIC, 44, \
+					     struct me4000_ao_channel_list)
 
 #define ME4000_AO_SYNCHRONOUS_EX_TRIG  _IO  (ME4000_MAGIC, 45)
 #define ME4000_AO_SYNCHRONOUS_SW       _IO  (ME4000_MAGIC, 46)
diff --git a/drivers/staging/poch/Kconfig b/drivers/staging/poch/Kconfig
new file mode 100644
index 0000000..b3b33b9
--- /dev/null
+++ b/drivers/staging/poch/Kconfig
@@ -0,0 +1,6 @@
+config POCH
+	tristate "Redrapids Pocket Change CardBus support"
+	depends on PCI && UIO
+	default N
+	---help---
+	  Enable support for Redrapids Pocket Change CardBus devices.
diff --git a/drivers/staging/poch/Makefile b/drivers/staging/poch/Makefile
new file mode 100644
index 0000000..d2b9680
--- /dev/null
+++ b/drivers/staging/poch/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_POCH)		+= poch.o
diff --git a/drivers/staging/poch/README b/drivers/staging/poch/README
new file mode 100644
index 0000000..f65e979
--- /dev/null
+++ b/drivers/staging/poch/README
@@ -0,0 +1,7 @@
+TODO:
+	- fix transmit overflows
+	- audit userspace interfaces
+	- get reserved major/minor if needed
+
+Please send patches to Greg Kroah-Hartman <greg@kroah.com> and
+Vijay Kumar <vijaykumar@bravegnu.org> and Jaya Kumar <jayakumar.lkml@gmail.com>
diff --git a/drivers/staging/poch/poch.c b/drivers/staging/poch/poch.c
new file mode 100644
index 0000000..0e113f9
--- /dev/null
+++ b/drivers/staging/poch/poch.c
@@ -0,0 +1,1425 @@
+/*
+ * User-space DMA and UIO based Redrapids Pocket Change CardBus driver
+ *
+ * Copyright 2008 Vijay Kumar <vijaykumar@bravegnu.org>
+ *
+ * Licensed under GPL version 2 only.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/uio_driver.h>
+#include <linux/spinlock.h>
+#include <linux/cdev.h>
+#include <linux/delay.h>
+#include <linux/sysfs.h>
+#include <linux/poll.h>
+#include <linux/idr.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/ioctl.h>
+#include <linux/io.h>
+
+#include "poch.h"
+
+#include <asm/cacheflush.h>
+
+#ifndef PCI_VENDOR_ID_RRAPIDS
+#define PCI_VENDOR_ID_RRAPIDS 0x17D2
+#endif
+
+#ifndef PCI_DEVICE_ID_RRAPIDS_POCKET_CHANGE
+#define PCI_DEVICE_ID_RRAPIDS_POCKET_CHANGE 0x0351
+#endif
+
+#define POCH_NCHANNELS 2
+
+#define MAX_POCH_CARDS 8
+#define MAX_POCH_DEVICES (MAX_POCH_CARDS * POCH_NCHANNELS)
+
+#define DRV_NAME "poch"
+#define PFX      DRV_NAME ": "
+
+/*
+ * BAR0 Bridge Register Definitions
+ */
+
+#define BRIDGE_REV_REG			0x0
+#define BRIDGE_INT_MASK_REG		0x4
+#define BRIDGE_INT_STAT_REG		0x8
+
+#define BRIDGE_INT_ACTIVE		(0x1 << 31)
+#define BRIDGE_INT_FPGA		        (0x1 << 2)
+#define BRIDGE_INT_TEMP_FAIL		(0x1 << 1)
+#define	BRIDGE_INT_TEMP_WARN		(0x1 << 0)
+
+#define BRIDGE_FPGA_RESET_REG		0xC
+
+#define BRIDGE_CARD_POWER_REG		0x10
+#define BRIDGE_CARD_POWER_EN            (0x1 << 0)
+#define BRIDGE_CARD_POWER_PROG_DONE     (0x1 << 31)
+
+#define BRIDGE_JTAG_REG			0x14
+#define BRIDGE_DMA_GO_REG		0x18
+#define BRIDGE_STAT_0_REG		0x1C
+#define BRIDGE_STAT_1_REG		0x20
+#define BRIDGE_STAT_2_REG		0x24
+#define BRIDGE_STAT_3_REG		0x28
+#define BRIDGE_TEMP_STAT_REG		0x2C
+#define BRIDGE_TEMP_THRESH_REG		0x30
+#define BRIDGE_EEPROM_REVSEL_REG	0x34
+#define BRIDGE_CIS_STRUCT_REG		0x100
+#define BRIDGE_BOARDREV_REG		0x124
+
+/*
+ * BAR1 FPGA Register Definitions
+ */
+
+#define FPGA_IFACE_REV_REG		0x0
+#define FPGA_RX_BLOCK_SIZE_REG		0x8
+#define FPGA_TX_BLOCK_SIZE_REG		0xC
+#define FPGA_RX_BLOCK_COUNT_REG		0x10
+#define FPGA_TX_BLOCK_COUNT_REG		0x14
+#define FPGA_RX_CURR_DMA_BLOCK_REG	0x18
+#define FPGA_TX_CURR_DMA_BLOCK_REG	0x1C
+#define FPGA_RX_GROUP_COUNT_REG		0x20
+#define FPGA_TX_GROUP_COUNT_REG		0x24
+#define FPGA_RX_CURR_GROUP_REG		0x28
+#define FPGA_TX_CURR_GROUP_REG		0x2C
+#define FPGA_RX_CURR_PCI_REG		0x38
+#define FPGA_TX_CURR_PCI_REG		0x3C
+#define FPGA_RX_GROUP0_START_REG	0x40
+#define FPGA_TX_GROUP0_START_REG	0xC0
+#define FPGA_DMA_DESC_1_REG		0x140
+#define FPGA_DMA_DESC_2_REG		0x144
+#define FPGA_DMA_DESC_3_REG		0x148
+#define FPGA_DMA_DESC_4_REG		0x14C
+
+#define FPGA_DMA_INT_STAT_REG		0x150
+#define FPGA_DMA_INT_MASK_REG		0x154
+#define FPGA_DMA_INT_RX		(1 << 0)
+#define FPGA_DMA_INT_TX		(1 << 1)
+
+#define FPGA_RX_GROUPS_PER_INT_REG	0x158
+#define FPGA_TX_GROUPS_PER_INT_REG	0x15C
+#define FPGA_DMA_ADR_PAGE_REG		0x160
+#define FPGA_FPGA_REV_REG		0x200
+
+#define FPGA_ADC_CLOCK_CTL_REG		0x204
+#define FPGA_ADC_CLOCK_CTL_OSC_EN	(0x1 << 3)
+#define FPGA_ADC_CLOCK_LOCAL_CLK	(0x1 | FPGA_ADC_CLOCK_CTL_OSC_EN)
+#define FPGA_ADC_CLOCK_EXT_SAMP_CLK	0X0
+
+#define FPGA_ADC_DAC_EN_REG		0x208
+#define FPGA_ADC_DAC_EN_DAC_OFF         (0x1 << 1)
+#define FPGA_ADC_DAC_EN_ADC_OFF         (0x1 << 0)
+
+#define FPGA_INT_STAT_REG		0x20C
+#define FPGA_INT_MASK_REG		0x210
+#define FPGA_INT_PLL_UNLOCKED		(0x1 << 9)
+#define FPGA_INT_DMA_CORE		(0x1 << 8)
+#define FPGA_INT_TX_FF_EMPTY		(0x1 << 7)
+#define FPGA_INT_RX_FF_EMPTY		(0x1 << 6)
+#define FPGA_INT_TX_FF_OVRFLW		(0x1 << 3)
+#define FPGA_INT_RX_FF_OVRFLW		(0x1 << 2)
+#define FPGA_INT_TX_ACQ_DONE		(0x1 << 1)
+#define FPGA_INT_RX_ACQ_DONE		(0x1)
+
+#define FPGA_RX_ADC_CTL_REG		0x214
+#define FPGA_RX_ADC_CTL_CONT_CAP	(0x0)
+#define FPGA_RX_ADC_CTL_SNAP_CAP	(0x1)
+
+#define FPGA_RX_ARM_REG			0x21C
+
+#define FPGA_DOM_REG			0x224
+#define	FPGA_DOM_DCM_RESET		(0x1 << 5)
+#define FPGA_DOM_SOFT_RESET		(0x1 << 4)
+#define FPGA_DOM_DUAL_M_SG_DMA		(0x0)
+#define FPGA_DOM_TARGET_ACCESS		(0x1)
+
+#define FPGA_TX_CTL_REG			0x228
+#define FPGA_TX_CTL_FIFO_FLUSH          (0x1 << 9)
+#define FPGA_TX_CTL_OUTPUT_ZERO         (0x0 << 2)
+#define FPGA_TX_CTL_OUTPUT_CARDBUS      (0x1 << 2)
+#define FPGA_TX_CTL_OUTPUT_ADC          (0x2 << 2)
+#define FPGA_TX_CTL_OUTPUT_SNAPSHOT     (0x3 << 2)
+#define FPGA_TX_CTL_LOOPBACK            (0x1 << 0)
+
+#define FPGA_ENDIAN_MODE_REG		0x22C
+#define FPGA_RX_FIFO_COUNT_REG		0x28C
+#define FPGA_TX_ENABLE_REG		0x298
+#define FPGA_TX_TRIGGER_REG		0x29C
+#define FPGA_TX_DATAMEM_COUNT_REG	0x2A8
+#define FPGA_CAP_FIFO_REG		0x300
+#define FPGA_TX_SNAPSHOT_REG		0x8000
+
+/*
+ * Channel Index Definitions
+ */
+
+enum {
+	CHNO_RX_CHANNEL,
+	CHNO_TX_CHANNEL,
+};
+
+struct poch_dev;
+
+enum channel_dir {
+	CHANNEL_DIR_RX,
+	CHANNEL_DIR_TX,
+};
+
+struct poch_group_info {
+	struct page *pg;
+	dma_addr_t dma_addr;
+	unsigned long user_offset;
+};
+
+struct channel_info {
+	unsigned int chno;
+
+	atomic_t sys_block_size;
+	atomic_t sys_group_size;
+	atomic_t sys_group_count;
+
+	enum channel_dir dir;
+
+	unsigned long block_size;
+	unsigned long group_size;
+	unsigned long group_count;
+
+	/* Contains the DMA address and VM offset of each group. */
+	struct poch_group_info *groups;
+
+	/* Contains the header and circular buffer exported to userspace. */
+	spinlock_t group_offsets_lock;
+	struct poch_cbuf_header *header;
+	struct page *header_pg;
+	unsigned long header_size;
+
+	/* Last group indicated as 'complete' to user space. */
+	unsigned int transfer;
+
+	wait_queue_head_t wq;
+
+	union {
+		unsigned int data_available;
+		unsigned int space_available;
+	};
+
+	void __iomem *bridge_iomem;
+	void __iomem *fpga_iomem;
+	spinlock_t *iomem_lock;
+
+	atomic_t free;
+	atomic_t inited;
+
+	/* Error counters */
+	struct poch_counters counters;
+	spinlock_t counters_lock;
+
+	struct device *dev;
+};
+
+struct poch_dev {
+	struct uio_info uio;
+	struct pci_dev *pci_dev;
+	unsigned int nchannels;
+	struct channel_info channels[POCH_NCHANNELS];
+	struct cdev cdev;
+
+	/* Counts the no. of channels that have been opened. On first
+	 * open, the card is powered on. On last channel close, the
+	 * card is powered off.
+	 */
+	atomic_t usage;
+
+	void __iomem *bridge_iomem;
+	void __iomem *fpga_iomem;
+	spinlock_t iomem_lock;
+
+	struct device *dev;
+};
+
+static dev_t poch_first_dev;
+static struct class *poch_cls;
+static DEFINE_IDR(poch_ids);
+
+static ssize_t store_block_size(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct channel_info *channel = dev_get_drvdata(dev);
+	unsigned long block_size;
+
+	sscanf(buf, "%lu", &block_size);
+	atomic_set(&channel->sys_block_size, block_size);
+
+	return count;
+}
+static DEVICE_ATTR(block_size, S_IWUSR|S_IWGRP, NULL, store_block_size);
+
+static ssize_t store_group_size(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct channel_info *channel = dev_get_drvdata(dev);
+	unsigned long group_size;
+
+	sscanf(buf, "%lu", &group_size);
+	atomic_set(&channel->sys_group_size, group_size);
+
+	return count;
+}
+static DEVICE_ATTR(group_size, S_IWUSR|S_IWGRP, NULL, store_group_size);
+
+static ssize_t store_group_count(struct device *dev,
+				struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct channel_info *channel = dev_get_drvdata(dev);
+	unsigned long group_count;
+
+	sscanf(buf, "%lu", &group_count);
+	atomic_set(&channel->sys_group_count, group_count);
+
+	return count;
+}
+static DEVICE_ATTR(group_count, S_IWUSR|S_IWGRP, NULL, store_group_count);
+
+static ssize_t show_direction(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct channel_info *channel = dev_get_drvdata(dev);
+	int len;
+
+	len = sprintf(buf, "%s\n", (channel->dir ? "tx" : "rx"));
+	return len;
+}
+static DEVICE_ATTR(dir, S_IRUSR|S_IRGRP, show_direction, NULL);
+
+static ssize_t show_mmap_size(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct channel_info *channel = dev_get_drvdata(dev);
+	int len;
+	unsigned long mmap_size;
+	unsigned long group_pages;
+	unsigned long header_pages;
+	unsigned long total_group_pages;
+
+	/* FIXME: We do not have to add 1, if group_size a multiple of
+	   PAGE_SIZE. */
+	group_pages = (channel->group_size / PAGE_SIZE) + 1;
+	header_pages = (channel->header_size / PAGE_SIZE) + 1;
+	total_group_pages = group_pages * channel->group_count;
+
+	mmap_size = (header_pages + total_group_pages) * PAGE_SIZE;
+	len = sprintf(buf, "%lu\n", mmap_size);
+	return len;
+}
+static DEVICE_ATTR(mmap_size, S_IRUSR|S_IRGRP, show_mmap_size, NULL);
+
+static struct device_attribute *poch_class_attrs[] = {
+	&dev_attr_block_size,
+	&dev_attr_group_size,
+	&dev_attr_group_count,
+	&dev_attr_dir,
+	&dev_attr_mmap_size,
+};
+
+static void poch_channel_free_groups(struct channel_info *channel)
+{
+	unsigned long i;
+
+	for (i = 0; i < channel->group_count; i++) {
+		struct poch_group_info *group;
+		unsigned int order;
+
+		group = &channel->groups[i];
+		order = get_order(channel->group_size);
+		if (group->pg)
+			__free_pages(group->pg, order);
+	}
+}
+
+static int poch_channel_alloc_groups(struct channel_info *channel)
+{
+	unsigned long i;
+	unsigned long group_pages;
+	unsigned long header_pages;
+
+	group_pages = (channel->group_size / PAGE_SIZE) + 1;
+	header_pages = (channel->header_size / PAGE_SIZE) + 1;
+
+	for (i = 0; i < channel->group_count; i++) {
+		struct poch_group_info *group;
+		unsigned int order;
+		gfp_t gfp_mask;
+
+		group = &channel->groups[i];
+		order = get_order(channel->group_size);
+
+		/*
+		 * __GFP_COMP is required here since we are going to
+		 * perform non-linear mapping to userspace. For more
+		 * information read the vm_insert_page() function
+		 * comments.
+		 */
+
+		gfp_mask = GFP_KERNEL | GFP_DMA32 | __GFP_ZERO;
+		group->pg = alloc_pages(gfp_mask, order);
+		if (!group->pg) {
+			poch_channel_free_groups(channel);
+			return -ENOMEM;
+		}
+
+		/* FIXME: This is the physical address not the bus
+		 * address!  This won't work in architectures that
+		 * have an IOMMU. Can we use pci_map_single() for
+		 * this?
+		 */
+		group->dma_addr = page_to_pfn(group->pg) * PAGE_SIZE;
+		group->user_offset =
+			(header_pages + (i * group_pages)) * PAGE_SIZE;
+
+		printk(KERN_INFO PFX "%ld: user_offset: 0x%lx dma: 0x%x\n", i,
+		       group->user_offset, group->dma_addr);
+	}
+
+	return 0;
+}
+
+static void channel_latch_attr(struct channel_info *channel)
+{
+	channel->group_count = atomic_read(&channel->sys_group_count);
+	channel->group_size = atomic_read(&channel->sys_group_size);
+	channel->block_size = atomic_read(&channel->sys_block_size);
+}
+
+/*
+ * Configure DMA group registers
+ */
+static void channel_dma_init(struct channel_info *channel)
+{
+	void __iomem *fpga = channel->fpga_iomem;
+	u32 group_regs_base;
+	u32 group_reg;
+	unsigned int page;
+	unsigned int group_in_page;
+	unsigned long i;
+	u32 block_size_reg;
+	u32 block_count_reg;
+	u32 group_count_reg;
+	u32 groups_per_int_reg;
+	u32 curr_pci_reg;
+
+	if (channel->chno == CHNO_RX_CHANNEL) {
+		group_regs_base = FPGA_RX_GROUP0_START_REG;
+		block_size_reg = FPGA_RX_BLOCK_SIZE_REG;
+		block_count_reg = FPGA_RX_BLOCK_COUNT_REG;
+		group_count_reg = FPGA_RX_GROUP_COUNT_REG;
+		groups_per_int_reg = FPGA_RX_GROUPS_PER_INT_REG;
+		curr_pci_reg = FPGA_RX_CURR_PCI_REG;
+	} else {
+		group_regs_base = FPGA_TX_GROUP0_START_REG;
+		block_size_reg = FPGA_TX_BLOCK_SIZE_REG;
+		block_count_reg = FPGA_TX_BLOCK_COUNT_REG;
+		group_count_reg = FPGA_TX_GROUP_COUNT_REG;
+		groups_per_int_reg = FPGA_TX_GROUPS_PER_INT_REG;
+		curr_pci_reg = FPGA_TX_CURR_PCI_REG;
+	}
+
+	printk(KERN_WARNING "block_size, group_size, group_count\n");
+	iowrite32(channel->block_size, fpga + block_size_reg);
+	iowrite32(channel->group_size / channel->block_size,
+		  fpga + block_count_reg);
+	iowrite32(channel->group_count, fpga + group_count_reg);
+	/* FIXME: Hardcoded groups per int. Get it from sysfs? */
+	iowrite32(1, fpga + groups_per_int_reg);
+
+	/* Unlock PCI address? Not defined in the data sheet, but used
+	 * in the reference code by Redrapids.
+	 */
+	iowrite32(0x1, fpga + curr_pci_reg);
+
+	/* The DMA address page register is shared between the RX and
+	 * TX channels, so acquire lock.
+	 */
+	spin_lock(channel->iomem_lock);
+	for (i = 0; i < channel->group_count; i++) {
+		page = i / 32;
+		group_in_page = i % 32;
+
+		group_reg = group_regs_base + (group_in_page * 4);
+
+		iowrite32(page, fpga + FPGA_DMA_ADR_PAGE_REG);
+		iowrite32(channel->groups[i].dma_addr, fpga + group_reg);
+	}
+	for (i = 0; i < channel->group_count; i++) {
+		page = i / 32;
+		group_in_page = i % 32;
+
+		group_reg = group_regs_base + (group_in_page * 4);
+
+		iowrite32(page, fpga + FPGA_DMA_ADR_PAGE_REG);
+		printk(KERN_INFO PFX "%ld: read dma_addr: 0x%x\n", i,
+		       ioread32(fpga + group_reg));
+	}
+	spin_unlock(channel->iomem_lock);
+
+}
+
+static int poch_channel_alloc_header(struct channel_info *channel)
+{
+	struct poch_cbuf_header *header = channel->header;
+	unsigned long group_offset_size;
+	unsigned long tot_group_offsets_size;
+
+	/* Allocate memory to hold header exported userspace */
+	group_offset_size = sizeof(header->group_offsets[0]);
+	tot_group_offsets_size = group_offset_size * channel->group_count;
+	channel->header_size = sizeof(*header) + tot_group_offsets_size;
+	channel->header_pg = alloc_pages(GFP_KERNEL | __GFP_ZERO,
+					 get_order(channel->header_size));
+	if (!channel->header_pg)
+		return -ENOMEM;
+
+	channel->header = page_address(channel->header_pg);
+
+	return 0;
+}
+
+static void poch_channel_free_header(struct channel_info *channel)
+{
+	unsigned int order;
+
+	order = get_order(channel->header_size);
+	__free_pages(channel->header_pg, order);
+}
+
+static void poch_channel_init_header(struct channel_info *channel)
+{
+	int i;
+	struct poch_group_info *groups;
+	s32 *group_offsets;
+
+	channel->header->group_size_bytes = channel->group_size;
+	channel->header->group_count = channel->group_count;
+
+	spin_lock_init(&channel->group_offsets_lock);
+
+	group_offsets = channel->header->group_offsets;
+	groups = channel->groups;
+
+	for (i = 0; i < channel->group_count; i++) {
+		if (channel->dir == CHANNEL_DIR_RX)
+			group_offsets[i] = -1;
+		else
+			group_offsets[i] = groups[i].user_offset;
+	}
+}
+
+static void __poch_channel_clear_counters(struct channel_info *channel)
+{
+	channel->counters.pll_unlock = 0;
+	channel->counters.fifo_empty = 0;
+	channel->counters.fifo_overflow = 0;
+}
+
+static int poch_channel_init(struct channel_info *channel,
+			     struct poch_dev *poch_dev)
+{
+	struct pci_dev *pdev = poch_dev->pci_dev;
+	struct device *dev = &pdev->dev;
+	unsigned long alloc_size;
+	int ret;
+
+	printk(KERN_WARNING "channel_latch_attr\n");
+
+	channel_latch_attr(channel);
+
+	channel->transfer = 0;
+
+	/* Allocate memory to hold group information. */
+	alloc_size = channel->group_count * sizeof(struct poch_group_info);
+	channel->groups = kzalloc(alloc_size, GFP_KERNEL);
+	if (!channel->groups) {
+		dev_err(dev, "error allocating memory for group info\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	printk(KERN_WARNING "poch_channel_alloc_groups\n");
+
+	ret = poch_channel_alloc_groups(channel);
+	if (ret) {
+		dev_err(dev, "error allocating groups of order %d\n",
+			get_order(channel->group_size));
+		goto out_free_group_info;
+	}
+
+	ret = poch_channel_alloc_header(channel);
+	if (ret) {
+		dev_err(dev, "error allocating user space header\n");
+		goto out_free_groups;
+	}
+
+	channel->fpga_iomem = poch_dev->fpga_iomem;
+	channel->bridge_iomem = poch_dev->bridge_iomem;
+	channel->iomem_lock = &poch_dev->iomem_lock;
+	spin_lock_init(&channel->counters_lock);
+
+	__poch_channel_clear_counters(channel);
+
+	printk(KERN_WARNING "poch_channel_init_header\n");
+
+	poch_channel_init_header(channel);
+
+	return 0;
+
+ out_free_groups:
+	poch_channel_free_groups(channel);
+ out_free_group_info:
+	kfree(channel->groups);
+ out:
+	return ret;
+}
+
+static int poch_wait_fpga_prog(void __iomem *bridge)
+{
+	unsigned long total_wait;
+	const unsigned long wait_period = 100;
+	/* FIXME: Get the actual timeout */
+	const unsigned long prog_timeo = 10000; /* 10 Seconds */
+	u32 card_power;
+
+	printk(KERN_WARNING "poch_wait_fpg_prog\n");
+
+	printk(KERN_INFO PFX "programming fpga ...\n");
+	total_wait = 0;
+	while (1) {
+		msleep(wait_period);
+		total_wait += wait_period;
+
+		card_power = ioread32(bridge + BRIDGE_CARD_POWER_REG);
+		if (card_power & BRIDGE_CARD_POWER_PROG_DONE) {
+			printk(KERN_INFO PFX "programming done\n");
+			return 0;
+		}
+		if (total_wait > prog_timeo) {
+			printk(KERN_ERR PFX
+			       "timed out while programming FPGA\n");
+			return -EIO;
+		}
+	}
+}
+
+static void poch_card_power_off(struct poch_dev *poch_dev)
+{
+	void __iomem *bridge = poch_dev->bridge_iomem;
+	u32 card_power;
+
+	iowrite32(0, bridge + BRIDGE_INT_MASK_REG);
+	iowrite32(0, bridge + BRIDGE_DMA_GO_REG);
+
+	card_power = ioread32(bridge + BRIDGE_CARD_POWER_REG);
+	iowrite32(card_power & ~BRIDGE_CARD_POWER_EN,
+		  bridge + BRIDGE_CARD_POWER_REG);
+}
+
+enum clk_src {
+	CLK_SRC_ON_BOARD,
+	CLK_SRC_EXTERNAL
+};
+
+static void poch_card_clock_on(void __iomem *fpga)
+{
+	/* FIXME: Get this data through sysfs? */
+	enum clk_src clk_src = CLK_SRC_ON_BOARD;
+
+	if (clk_src == CLK_SRC_ON_BOARD) {
+		iowrite32(FPGA_ADC_CLOCK_LOCAL_CLK | FPGA_ADC_CLOCK_CTL_OSC_EN,
+			  fpga + FPGA_ADC_CLOCK_CTL_REG);
+	} else if (clk_src == CLK_SRC_EXTERNAL) {
+		iowrite32(FPGA_ADC_CLOCK_EXT_SAMP_CLK,
+			  fpga + FPGA_ADC_CLOCK_CTL_REG);
+	}
+}
+
+static int poch_card_power_on(struct poch_dev *poch_dev)
+{
+	void __iomem *bridge = poch_dev->bridge_iomem;
+	void __iomem *fpga = poch_dev->fpga_iomem;
+
+	iowrite32(BRIDGE_CARD_POWER_EN, bridge + BRIDGE_CARD_POWER_REG);
+
+	if (poch_wait_fpga_prog(bridge) != 0) {
+		poch_card_power_off(poch_dev);
+		return -EIO;
+	}
+
+	poch_card_clock_on(fpga);
+
+	/* Sync to new clock, reset state machines, set DMA mode. */
+	iowrite32(FPGA_DOM_DCM_RESET | FPGA_DOM_SOFT_RESET
+		  | FPGA_DOM_DUAL_M_SG_DMA, fpga + FPGA_DOM_REG);
+
+	/* FIXME: The time required for sync. needs to be tuned. */
+	msleep(1000);
+
+	return 0;
+}
+
+static void poch_channel_analog_on(struct channel_info *channel)
+{
+	void __iomem *fpga = channel->fpga_iomem;
+	u32 adc_dac_en;
+
+	spin_lock(channel->iomem_lock);
+	adc_dac_en = ioread32(fpga + FPGA_ADC_DAC_EN_REG);
+	switch (channel->chno) {
+	case CHNO_RX_CHANNEL:
+		iowrite32(adc_dac_en & ~FPGA_ADC_DAC_EN_ADC_OFF,
+			  fpga + FPGA_ADC_DAC_EN_REG);
+		break;
+	case CHNO_TX_CHANNEL:
+		iowrite32(adc_dac_en & ~FPGA_ADC_DAC_EN_DAC_OFF,
+			  fpga + FPGA_ADC_DAC_EN_REG);
+		break;
+	}
+	spin_unlock(channel->iomem_lock);
+}
+
+static int poch_open(struct inode *inode, struct file *filp)
+{
+	struct poch_dev *poch_dev;
+	struct channel_info *channel;
+	void __iomem *bridge;
+	void __iomem *fpga;
+	int chno;
+	int usage;
+	int ret;
+
+	poch_dev = container_of(inode->i_cdev, struct poch_dev, cdev);
+	bridge = poch_dev->bridge_iomem;
+	fpga = poch_dev->fpga_iomem;
+
+	chno = iminor(inode) % poch_dev->nchannels;
+	channel = &poch_dev->channels[chno];
+
+	if (!atomic_dec_and_test(&channel->free)) {
+		atomic_inc(&channel->free);
+		ret = -EBUSY;
+		goto out;
+	}
+
+	usage = atomic_inc_return(&poch_dev->usage);
+
+	printk(KERN_WARNING "poch_card_power_on\n");
+
+	if (usage == 1) {
+		ret = poch_card_power_on(poch_dev);
+		if (ret)
+			goto out_dec_usage;
+	}
+
+	printk(KERN_INFO "CardBus Bridge Revision: %x\n",
+	       ioread32(bridge + BRIDGE_REV_REG));
+	printk(KERN_INFO "CardBus Interface Revision: %x\n",
+	       ioread32(fpga + FPGA_IFACE_REV_REG));
+
+	channel->chno = chno;
+	filp->private_data = channel;
+
+	printk(KERN_WARNING "poch_channel_init\n");
+
+	ret = poch_channel_init(channel, poch_dev);
+	if (ret)
+		goto out_power_off;
+
+	poch_channel_analog_on(channel);
+
+	printk(KERN_WARNING "channel_dma_init\n");
+
+	channel_dma_init(channel);
+
+	printk(KERN_WARNING "poch_channel_analog_on\n");
+
+	if (usage == 1) {
+		printk(KERN_WARNING "setting up DMA\n");
+
+		/* Initialize DMA Controller. */
+		iowrite32(FPGA_CAP_FIFO_REG, bridge + BRIDGE_STAT_2_REG);
+		iowrite32(FPGA_DMA_DESC_1_REG, bridge + BRIDGE_STAT_3_REG);
+
+		ioread32(fpga + FPGA_DMA_INT_STAT_REG);
+		ioread32(fpga + FPGA_INT_STAT_REG);
+		ioread32(bridge + BRIDGE_INT_STAT_REG);
+
+		/* Initialize Interrupts. FIXME: Enable temperature
+		 * handling We are enabling both Tx and Rx channel
+		 * interrupts here. Do we need to enable interrupts
+		 * only for the current channel? Anyways we won't get
+		 * the interrupt unless the DMA is activated.
+		 */
+		iowrite32(BRIDGE_INT_FPGA, bridge + BRIDGE_INT_MASK_REG);
+		iowrite32(FPGA_INT_DMA_CORE
+			  | FPGA_INT_PLL_UNLOCKED
+			  | FPGA_INT_TX_FF_EMPTY
+			  | FPGA_INT_RX_FF_EMPTY
+			  | FPGA_INT_TX_FF_OVRFLW
+			  | FPGA_INT_RX_FF_OVRFLW,
+			  fpga + FPGA_INT_MASK_REG);
+		iowrite32(FPGA_DMA_INT_RX | FPGA_DMA_INT_TX,
+			  fpga + FPGA_DMA_INT_MASK_REG);
+	}
+
+	if (channel->dir == CHANNEL_DIR_TX) {
+		/* Flush TX FIFO and output data from cardbus. */
+		iowrite32(FPGA_TX_CTL_FIFO_FLUSH
+			  | FPGA_TX_CTL_OUTPUT_CARDBUS,
+			  fpga + FPGA_TX_CTL_REG);
+	}
+
+	atomic_inc(&channel->inited);
+
+	return 0;
+
+ out_power_off:
+	if (usage == 1)
+		poch_card_power_off(poch_dev);
+ out_dec_usage:
+	atomic_dec(&poch_dev->usage);
+	atomic_inc(&channel->free);
+ out:
+	return ret;
+}
+
+static int poch_release(struct inode *inode, struct file *filp)
+{
+	struct channel_info *channel = filp->private_data;
+	struct poch_dev *poch_dev;
+	int usage;
+
+	poch_dev = container_of(inode->i_cdev, struct poch_dev, cdev);
+
+	usage = atomic_dec_return(&poch_dev->usage);
+	if (usage == 0) {
+		printk(KERN_WARNING "poch_card_power_off\n");
+		poch_card_power_off(poch_dev);
+	}
+
+	atomic_dec(&channel->inited);
+	poch_channel_free_header(channel);
+	poch_channel_free_groups(channel);
+	kfree(channel->groups);
+	atomic_inc(&channel->free);
+
+	return 0;
+}
+
+/*
+ * Map the header and the group buffers, to user space.
+ */
+static int poch_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	struct channel_info *channel = filp->private_data;
+
+	unsigned long start;
+	unsigned long size;
+
+	unsigned long group_pages;
+	unsigned long header_pages;
+	unsigned long total_group_pages;
+
+	int pg_num;
+	struct page *pg;
+
+	int i;
+	int ret;
+
+	printk(KERN_WARNING "poch_mmap\n");
+
+	if (vma->vm_pgoff) {
+		printk(KERN_WARNING PFX "page offset: %lu\n", vma->vm_pgoff);
+		return -EINVAL;
+	}
+
+	group_pages = (channel->group_size / PAGE_SIZE) + 1;
+	header_pages = (channel->header_size / PAGE_SIZE) + 1;
+	total_group_pages = group_pages * channel->group_count;
+
+	size = vma->vm_end - vma->vm_start;
+	if (size != (header_pages + total_group_pages) * PAGE_SIZE) {
+		printk(KERN_WARNING PFX "required %lu bytes\n", size);
+		return -EINVAL;
+	}
+
+	start = vma->vm_start;
+
+	/* FIXME: Cleanup required on failure? */
+	pg = channel->header_pg;
+	for (pg_num = 0; pg_num < header_pages; pg_num++, pg++) {
+		printk(KERN_DEBUG PFX "page_count: %d\n", page_count(pg));
+		printk(KERN_DEBUG PFX "%d: header: 0x%lx\n", pg_num, start);
+		ret = vm_insert_page(vma, start, pg);
+		if (ret) {
+			printk(KERN_DEBUG "vm_insert 1 failed at %lx\n", start);
+			return ret;
+		}
+		start += PAGE_SIZE;
+	}
+
+	for (i = 0; i < channel->group_count; i++) {
+		pg = channel->groups[i].pg;
+		for (pg_num = 0; pg_num < group_pages; pg_num++, pg++) {
+			printk(KERN_DEBUG PFX "%d: group %d: 0x%lx\n",
+			       pg_num, i, start);
+			ret = vm_insert_page(vma, start, pg);
+			if (ret) {
+				printk(KERN_DEBUG PFX
+				       "vm_insert 2 failed at %d\n", pg_num);
+				return ret;
+			}
+			start += PAGE_SIZE;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Check whether there is some group that the user space has not
+ * consumed yet. When the user space consumes a group, it sets it to
+ * -1. Cosuming could be reading data in case of RX and filling a
+ * buffer in case of TX.
+ */
+static int poch_channel_available(struct channel_info *channel)
+{
+	int i;
+
+	spin_lock_irq(&channel->group_offsets_lock);
+
+	for (i = 0; i < channel->group_count; i++) {
+		if (channel->dir == CHANNEL_DIR_RX
+		    && channel->header->group_offsets[i] == -1) {
+			spin_unlock_irq(&channel->group_offsets_lock);
+			return 1;
+		}
+
+		if (channel->dir == CHANNEL_DIR_TX
+		    && channel->header->group_offsets[i] != -1) {
+			spin_unlock_irq(&channel->group_offsets_lock);
+			return 1;
+		}
+	}
+
+	spin_unlock_irq(&channel->group_offsets_lock);
+
+	return 0;
+}
+
+static unsigned int poch_poll(struct file *filp, poll_table *pt)
+{
+	struct channel_info *channel = filp->private_data;
+	unsigned int ret = 0;
+
+	poll_wait(filp, &channel->wq, pt);
+
+	if (poch_channel_available(channel)) {
+		if (channel->dir == CHANNEL_DIR_RX)
+			ret = POLLIN | POLLRDNORM;
+		else
+			ret = POLLOUT | POLLWRNORM;
+	}
+
+	return ret;
+}
+
+static int poch_ioctl(struct inode *inode, struct file *filp,
+		      unsigned int cmd, unsigned long arg)
+{
+	struct channel_info *channel = filp->private_data;
+	void __iomem *fpga = channel->fpga_iomem;
+	void __iomem *bridge = channel->bridge_iomem;
+	void __user *argp = (void __user *)arg;
+	struct vm_area_struct *vms;
+	struct poch_counters counters;
+	int ret;
+
+	switch (cmd) {
+	case POCH_IOC_TRANSFER_START:
+		switch (channel->chno) {
+		case CHNO_TX_CHANNEL:
+			printk(KERN_INFO PFX "ioctl: Tx start\n");
+			iowrite32(0x1, fpga + FPGA_TX_TRIGGER_REG);
+			iowrite32(0x1, fpga + FPGA_TX_ENABLE_REG);
+
+			/* FIXME: Does it make sense to do a DMA GO
+			 * twice, once in Tx and once in Rx.
+			 */
+			iowrite32(0x1, bridge + BRIDGE_DMA_GO_REG);
+			break;
+		case CHNO_RX_CHANNEL:
+			printk(KERN_INFO PFX "ioctl: Rx start\n");
+			iowrite32(0x1, fpga + FPGA_RX_ARM_REG);
+			iowrite32(0x1, bridge + BRIDGE_DMA_GO_REG);
+			break;
+		}
+		break;
+	case POCH_IOC_TRANSFER_STOP:
+		switch (channel->chno) {
+		case CHNO_TX_CHANNEL:
+			printk(KERN_INFO PFX "ioctl: Tx stop\n");
+			iowrite32(0x0, fpga + FPGA_TX_ENABLE_REG);
+			iowrite32(0x0, fpga + FPGA_TX_TRIGGER_REG);
+			iowrite32(0x0, bridge + BRIDGE_DMA_GO_REG);
+			break;
+		case CHNO_RX_CHANNEL:
+			printk(KERN_INFO PFX "ioctl: Rx stop\n");
+			iowrite32(0x0, fpga + FPGA_RX_ARM_REG);
+			iowrite32(0x0, bridge + BRIDGE_DMA_GO_REG);
+			break;
+		}
+		break;
+	case POCH_IOC_GET_COUNTERS:
+		if (access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters)))
+			return -EFAULT;
+
+		spin_lock_irq(&channel->counters_lock);
+		counters = channel->counters;
+		__poch_channel_clear_counters(channel);
+		spin_unlock_irq(&channel->counters_lock);
+
+		ret = copy_to_user(argp, &counters,
+				   sizeof(struct poch_counters));
+		if (ret)
+			return ret;
+
+		break;
+	case POCH_IOC_SYNC_GROUP_FOR_USER:
+	case POCH_IOC_SYNC_GROUP_FOR_DEVICE:
+		vms = find_vma(current->mm, arg);
+		if (!vms)
+			/* Address not mapped. */
+			return -EINVAL;
+		if (vms->vm_file != filp)
+			/* Address mapped from different device/file. */
+			return -EINVAL;
+
+		flush_cache_range(vms, arg, arg + channel->group_size);
+		break;
+	}
+	return 0;
+}
+
+static struct file_operations poch_fops = {
+	.owner = THIS_MODULE,
+	.open = poch_open,
+	.release = poch_release,
+	.ioctl = poch_ioctl,
+	.poll = poch_poll,
+	.mmap = poch_mmap
+};
+
+static void poch_irq_dma(struct channel_info *channel)
+{
+	u32 prev_transfer;
+	u32 curr_transfer;
+	long groups_done;
+	unsigned long i, j;
+	struct poch_group_info *groups;
+	s32 *group_offsets;
+	u32 curr_group_reg;
+
+	if (!atomic_read(&channel->inited))
+		return;
+
+	prev_transfer = channel->transfer;
+
+	if (channel->chno == CHNO_RX_CHANNEL)
+		curr_group_reg = FPGA_RX_CURR_GROUP_REG;
+	else
+		curr_group_reg = FPGA_TX_CURR_GROUP_REG;
+
+	curr_transfer = ioread32(channel->fpga_iomem + curr_group_reg);
+
+	groups_done = curr_transfer - prev_transfer;
+	/* Check wrap over, and handle it. */
+	if (groups_done <= 0)
+		groups_done += channel->group_count;
+
+	group_offsets = channel->header->group_offsets;
+	groups = channel->groups;
+
+	spin_lock(&channel->group_offsets_lock);
+
+	for (i = 0; i < groups_done; i++) {
+		j = (prev_transfer + i) % channel->group_count;
+		if (channel->dir == CHANNEL_DIR_RX)
+			group_offsets[j] = -1;
+		else
+			group_offsets[j] = groups[j].user_offset;
+	}
+
+	spin_unlock(&channel->group_offsets_lock);
+
+	channel->transfer = curr_transfer;
+
+	wake_up_interruptible(&channel->wq);
+}
+
+static irqreturn_t poch_irq_handler(int irq, void *p)
+{
+	struct poch_dev *poch_dev = p;
+	void __iomem *bridge = poch_dev->bridge_iomem;
+	void __iomem *fpga = poch_dev->fpga_iomem;
+	struct channel_info *channel_rx = &poch_dev->channels[CHNO_RX_CHANNEL];
+	struct channel_info *channel_tx = &poch_dev->channels[CHNO_TX_CHANNEL];
+	u32 bridge_stat;
+	u32 fpga_stat;
+	u32 dma_stat;
+
+	bridge_stat = ioread32(bridge + BRIDGE_INT_STAT_REG);
+	fpga_stat = ioread32(fpga + FPGA_INT_STAT_REG);
+	dma_stat = ioread32(fpga + FPGA_DMA_INT_STAT_REG);
+
+	ioread32(fpga + FPGA_DMA_INT_STAT_REG);
+	ioread32(fpga + FPGA_INT_STAT_REG);
+	ioread32(bridge + BRIDGE_INT_STAT_REG);
+
+	if (bridge_stat & BRIDGE_INT_FPGA) {
+		if (fpga_stat & FPGA_INT_DMA_CORE) {
+			if (dma_stat & FPGA_DMA_INT_RX)
+				poch_irq_dma(channel_rx);
+			if (dma_stat & FPGA_DMA_INT_TX)
+				poch_irq_dma(channel_tx);
+		}
+		if (fpga_stat & FPGA_INT_PLL_UNLOCKED) {
+			channel_tx->counters.pll_unlock++;
+			channel_rx->counters.pll_unlock++;
+			if (printk_ratelimit())
+				printk(KERN_WARNING PFX "PLL unlocked\n");
+		}
+		if (fpga_stat & FPGA_INT_TX_FF_EMPTY)
+			channel_tx->counters.fifo_empty++;
+		if (fpga_stat & FPGA_INT_TX_FF_OVRFLW)
+			channel_tx->counters.fifo_overflow++;
+		if (fpga_stat & FPGA_INT_RX_FF_EMPTY)
+			channel_rx->counters.fifo_empty++;
+		if (fpga_stat & FPGA_INT_RX_FF_OVRFLW)
+			channel_rx->counters.fifo_overflow++;
+
+		/*
+		 * FIXME: These errors should be notified through the
+		 * poll interface as POLLERR.
+		 */
+
+		/* Re-enable interrupts. */
+		iowrite32(BRIDGE_INT_FPGA, bridge + BRIDGE_INT_MASK_REG);
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static void poch_class_dev_unregister(struct poch_dev *poch_dev, int id)
+{
+	int i, j;
+	int nattrs;
+	struct channel_info *channel;
+	dev_t devno;
+
+	if (poch_dev->dev == NULL)
+		return;
+
+	for (i = 0; i < poch_dev->nchannels; i++) {
+		channel = &poch_dev->channels[i];
+		devno = poch_first_dev + (id * poch_dev->nchannels) + i;
+
+		if (!channel->dev)
+			continue;
+
+		nattrs = sizeof(poch_class_attrs)/sizeof(poch_class_attrs[0]);
+		for (j = 0; j < nattrs; j++)
+			device_remove_file(channel->dev, poch_class_attrs[j]);
+
+		device_unregister(channel->dev);
+	}
+
+	device_unregister(poch_dev->dev);
+}
+
+static int __devinit poch_class_dev_register(struct poch_dev *poch_dev,
+					     int id)
+{
+	struct device *dev = &poch_dev->pci_dev->dev;
+	int i, j;
+	int nattrs;
+	int ret;
+	struct channel_info *channel;
+	dev_t devno;
+
+	poch_dev->dev = device_create(poch_cls, &poch_dev->pci_dev->dev,
+				      MKDEV(0, 0), NULL, "poch%d", id);
+	if (IS_ERR(poch_dev->dev)) {
+		dev_err(dev, "error creating parent class device");
+		ret = PTR_ERR(poch_dev->dev);
+		poch_dev->dev = NULL;
+		return ret;
+	}
+
+	for (i = 0; i < poch_dev->nchannels; i++) {
+		channel = &poch_dev->channels[i];
+
+		devno = poch_first_dev + (id * poch_dev->nchannels) + i;
+		channel->dev = device_create(poch_cls, poch_dev->dev, devno,
+					     NULL, "ch%d", i);
+		if (IS_ERR(channel->dev)) {
+			dev_err(dev, "error creating channel class device");
+			ret = PTR_ERR(channel->dev);
+			channel->dev = NULL;
+			poch_class_dev_unregister(poch_dev, id);
+			return ret;
+		}
+
+		dev_set_drvdata(channel->dev, channel);
+		nattrs = sizeof(poch_class_attrs)/sizeof(poch_class_attrs[0]);
+		for (j = 0; j < nattrs; j++) {
+			ret = device_create_file(channel->dev,
+						 poch_class_attrs[j]);
+			if (ret) {
+				dev_err(dev, "error creating attribute file");
+				poch_class_dev_unregister(poch_dev, id);
+				return ret;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int __devinit poch_pci_probe(struct pci_dev *pdev,
+				    const struct pci_device_id *pci_id)
+{
+	struct device *dev = &pdev->dev;
+	struct poch_dev *poch_dev;
+	struct uio_info *uio;
+	int ret;
+	int id;
+	int i;
+
+	poch_dev = kzalloc(sizeof(struct poch_dev), GFP_KERNEL);
+	if (!poch_dev) {
+		dev_err(dev, "error allocating priv. data memory\n");
+		return -ENOMEM;
+	}
+
+	poch_dev->pci_dev = pdev;
+	uio = &poch_dev->uio;
+
+	pci_set_drvdata(pdev, poch_dev);
+
+	spin_lock_init(&poch_dev->iomem_lock);
+
+	poch_dev->nchannels = POCH_NCHANNELS;
+	poch_dev->channels[CHNO_RX_CHANNEL].dir = CHANNEL_DIR_RX;
+	poch_dev->channels[CHNO_TX_CHANNEL].dir = CHANNEL_DIR_TX;
+
+	for (i = 0; i < poch_dev->nchannels; i++) {
+		init_waitqueue_head(&poch_dev->channels[i].wq);
+		atomic_set(&poch_dev->channels[i].free, 1);
+		atomic_set(&poch_dev->channels[i].inited, 0);
+	}
+
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_err(dev, "error enabling device\n");
+		goto out_free;
+	}
+
+	ret = pci_request_regions(pdev, "poch");
+	if (ret) {
+		dev_err(dev, "error requesting resources\n");
+		goto out_disable;
+	}
+
+	uio->mem[0].addr = pci_resource_start(pdev, 1);
+	if (!uio->mem[0].addr) {
+		dev_err(dev, "invalid BAR1\n");
+		ret = -ENODEV;
+		goto out_release;
+	}
+
+	uio->mem[0].size = pci_resource_len(pdev, 1);
+	uio->mem[0].memtype = UIO_MEM_PHYS;
+
+	uio->name = "poch";
+	uio->version = "0.0.1";
+	uio->irq = -1;
+	ret = uio_register_device(dev, uio);
+	if (ret) {
+		dev_err(dev, "error register UIO device: %d\n", ret);
+		goto out_release;
+	}
+
+	poch_dev->bridge_iomem = ioremap(pci_resource_start(pdev, 0),
+					 pci_resource_len(pdev, 0));
+	if (poch_dev->bridge_iomem == NULL) {
+		dev_err(dev, "error mapping bridge (bar0) registers\n");
+		ret = -ENOMEM;
+		goto out_uio_unreg;
+	}
+
+	poch_dev->fpga_iomem = ioremap(pci_resource_start(pdev, 1),
+				       pci_resource_len(pdev, 1));
+	if (poch_dev->fpga_iomem == NULL) {
+		dev_err(dev, "error mapping fpga (bar1) registers\n");
+		ret = -ENOMEM;
+		goto out_bar0_unmap;
+	}
+
+	ret = request_irq(pdev->irq, poch_irq_handler, IRQF_SHARED,
+			  dev->bus_id, poch_dev);
+	if (ret) {
+		dev_err(dev, "error requesting IRQ %u\n", pdev->irq);
+		ret = -ENOMEM;
+		goto out_bar1_unmap;
+	}
+
+	if (!idr_pre_get(&poch_ids, GFP_KERNEL)) {
+		dev_err(dev, "error allocating memory ids\n");
+		ret = -ENOMEM;
+		goto out_free_irq;
+	}
+
+	idr_get_new(&poch_ids, poch_dev, &id);
+	if (id >= MAX_POCH_CARDS) {
+		dev_err(dev, "minors exhausted\n");
+		ret = -EBUSY;
+		goto out_free_irq;
+	}
+
+	cdev_init(&poch_dev->cdev, &poch_fops);
+	poch_dev->cdev.owner = THIS_MODULE;
+	ret = cdev_add(&poch_dev->cdev,
+		       poch_first_dev + (id * poch_dev->nchannels),
+		       poch_dev->nchannels);
+	if (ret) {
+		dev_err(dev, "error register character device\n");
+		goto out_idr_remove;
+	}
+
+	ret = poch_class_dev_register(poch_dev, id);
+	if (ret)
+		goto out_cdev_del;
+
+	return 0;
+
+ out_cdev_del:
+	cdev_del(&poch_dev->cdev);
+ out_idr_remove:
+	idr_remove(&poch_ids, id);
+ out_free_irq:
+	free_irq(pdev->irq, poch_dev);
+ out_bar1_unmap:
+	iounmap(poch_dev->fpga_iomem);
+ out_bar0_unmap:
+	iounmap(poch_dev->bridge_iomem);
+ out_uio_unreg:
+	uio_unregister_device(uio);
+ out_release:
+	pci_release_regions(pdev);
+ out_disable:
+	pci_disable_device(pdev);
+ out_free:
+	kfree(poch_dev);
+	return ret;
+}
+
+/*
+ * FIXME: We are yet to handle the hot unplug case.
+ */
+static void poch_pci_remove(struct pci_dev *pdev)
+{
+	struct poch_dev *poch_dev = pci_get_drvdata(pdev);
+	struct uio_info *uio = &poch_dev->uio;
+	unsigned int minor = MINOR(poch_dev->cdev.dev);
+	unsigned int id = minor / poch_dev->nchannels;
+
+	/* FIXME: unmap fpga_iomem and bridge_iomem */
+
+	poch_class_dev_unregister(poch_dev, id);
+	cdev_del(&poch_dev->cdev);
+	idr_remove(&poch_ids, id);
+	free_irq(pdev->irq, poch_dev);
+	uio_unregister_device(uio);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+	iounmap(uio->mem[0].internal_addr);
+
+	kfree(poch_dev);
+}
+
+static const struct pci_device_id poch_pci_ids[] /* __devinitconst */ = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_RRAPIDS,
+		     PCI_DEVICE_ID_RRAPIDS_POCKET_CHANGE) },
+	{ 0, }
+};
+
+static struct pci_driver poch_pci_driver = {
+	.name = DRV_NAME,
+	.id_table = poch_pci_ids,
+	.probe = poch_pci_probe,
+	.remove = poch_pci_remove,
+};
+
+static int __init poch_init_module(void)
+{
+	int ret = 0;
+
+	ret = alloc_chrdev_region(&poch_first_dev, 0,
+				  MAX_POCH_DEVICES, DRV_NAME);
+	if (ret) {
+		printk(KERN_ERR PFX "error allocating device no.");
+		return ret;
+	}
+
+	poch_cls = class_create(THIS_MODULE, "pocketchange");
+	if (IS_ERR(poch_cls)) {
+		ret = PTR_ERR(poch_cls);
+		goto out_unreg_chrdev;
+	}
+
+	ret = pci_register_driver(&poch_pci_driver);
+	if (ret) {
+		printk(KERN_ERR PFX "error register PCI device");
+		goto out_class_destroy;
+	}
+
+	return 0;
+
+ out_class_destroy:
+	class_destroy(poch_cls);
+
+ out_unreg_chrdev:
+	unregister_chrdev_region(poch_first_dev, MAX_POCH_DEVICES);
+
+	return ret;
+}
+
+static void __exit poch_exit_module(void)
+{
+	pci_unregister_driver(&poch_pci_driver);
+	class_destroy(poch_cls);
+	unregister_chrdev_region(poch_first_dev, MAX_POCH_DEVICES);
+}
+
+module_init(poch_init_module);
+module_exit(poch_exit_module);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/poch/poch.h b/drivers/staging/poch/poch.h
new file mode 100644
index 0000000..51a2d14
--- /dev/null
+++ b/drivers/staging/poch/poch.h
@@ -0,0 +1,29 @@
+/*
+ * User-space DMA and UIO based Redrapids Pocket Change CardBus driver
+ *
+ * Copyright 2008 Vijay Kumar <vijaykumar@bravegnu.org>
+ *
+ * Part of userspace API. Should be moved to a header file in
+ * include/linux for final version.
+ *
+ */
+struct poch_cbuf_header {
+	__s32 group_size_bytes;
+	__s32 group_count;
+	__s32 group_offsets[0];
+};
+
+struct poch_counters {
+	__u32 fifo_empty;
+	__u32 fifo_overflow;
+	__u32 pll_unlock;
+};
+
+#define POCH_IOC_NUM			'9'
+
+#define POCH_IOC_TRANSFER_START		_IO(POCH_IOC_NUM, 0)
+#define POCH_IOC_TRANSFER_STOP		_IO(POCH_IOC_NUM, 1)
+#define POCH_IOC_GET_COUNTERS		_IOR(POCH_IOC_NUM, 2, \
+					     struct poch_counters)
+#define POCH_IOC_SYNC_GROUP_FOR_USER	_IO(POCH_IOC_NUM, 3)
+#define POCH_IOC_SYNC_GROUP_FOR_DEVICE	_IO(POCH_IOC_NUM, 4)
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index b61ac4b..8fa9490 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -54,7 +54,6 @@
  *       IS-NIC driver.
  */
 
-#include <linux/version.h>
 
 #define SLIC_DUMP_ENABLED               0
 #define KLUDGE_FOR_4GB_BOUNDARY         1
@@ -96,17 +95,9 @@
 #include <linux/moduleparam.h>
 
 #include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/pci.h>
 #include <linux/dma-mapping.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
 #include <linux/mii.h>
 #include <linux/if_vlan.h>
-#include <linux/skbuff.h>
-#include <linux/string.h>
 #include <asm/unaligned.h>
 
 #include <linux/ethtool.h>
@@ -275,7 +266,6 @@
 			  card->reg_value[i], card->reg_valueh[i]);
 	}
 }
-}
 #endif
 
 static void slic_init_adapter(struct net_device *netdev,
@@ -606,6 +596,7 @@
 	uint mmio_len = 0;
 	struct adapter *adapter = (struct adapter *) netdev_priv(dev);
 	struct sliccard *card;
+	struct mcast_address *mcaddr, *mlist;
 
 	ASSERT(adapter);
 	DBG_MSG("slicoss: %s ENTER dev[%p] adapter[%p]\n", __func__, dev,
@@ -625,6 +616,13 @@
 	DBG_MSG("slicoss: %s iounmap dev->base_addr[%x]\n", __func__,
 		(uint) dev->base_addr);
 	iounmap((void __iomem *)dev->base_addr);
+	/* free multicast addresses */
+	mlist = adapter->mcastaddrs;
+	while (mlist) {
+		mcaddr = mlist;
+		mlist = mlist->next;
+		kfree(mcaddr);
+	}
 	ASSERT(adapter->card);
 	card = adapter->card;
 	ASSERT(card->adapters_allocated);
diff --git a/drivers/staging/sxg/README b/drivers/staging/sxg/README
index 4d1ddbe..d514d18 100644
--- a/drivers/staging/sxg/README
+++ b/drivers/staging/sxg/README
@@ -7,6 +7,7 @@
 	- remove wrappers
 	- checkpatch.pl cleanups
 	- new functionality that the card needs
+	- remove reliance on x86
 
 Please send patches to:
         Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c
index 6ccbee8..5272a18 100644
--- a/drivers/staging/sxg/sxg.c
+++ b/drivers/staging/sxg/sxg.c
@@ -112,12 +112,16 @@
 static struct net_device_stats *sxg_get_stats(p_net_device dev);
 #endif
 
+#define XXXTODO 0
+
+#if XXXTODO
 static int sxg_mac_set_address(p_net_device dev, void *ptr);
+static void sxg_mcast_set_list(p_net_device dev);
+#endif
 
 static void sxg_adapter_set_hwaddr(p_adapter_t adapter);
 
 static void sxg_unmap_mmio_space(p_adapter_t adapter);
-static void sxg_mcast_set_mask(p_adapter_t adapter);
 
 static int sxg_initialize_adapter(p_adapter_t adapter);
 static void sxg_stock_rcv_buffers(p_adapter_t adapter);
@@ -132,9 +136,6 @@
 			      u32 DevAddr, u32 RegAddr, u32 Value);
 static int sxg_read_mdio_reg(p_adapter_t adapter,
 			     u32 DevAddr, u32 RegAddr, u32 *pValue);
-static void sxg_mcast_set_list(p_net_device dev);
-
-#define XXXTODO 0
 
 static unsigned int sxg_first_init = 1;
 static char *sxg_banner =
@@ -202,7 +203,7 @@
 {
 	if (sxg_first_init) {
 		DBG_ERROR("sxg: %s sxg_first_init set jiffies[%lx]\n",
-			  __FUNCTION__, jiffies);
+			  __func__, jiffies);
 		sxg_first_init = 0;
 		spin_lock_init(&sxg_global.driver_lock);
 	}
@@ -223,7 +224,7 @@
 	return;
 }
 
-// SXG Globals
+/* SXG Globals */
 static SXG_DRIVER SxgDriver;
 
 #ifdef  ATKDBG
@@ -250,7 +251,7 @@
 	u32 ThisSectionSize;
 	u32 *Instruction = NULL;
 	u32 BaseAddress, AddressOffset, Address;
-//      u32                         Failure;
+/*      u32                         Failure; */
 	u32 ValueRead;
 	u32 i;
 	u32 numSections = 0;
@@ -259,10 +260,10 @@
 
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DnldUcod",
 		  adapter, 0, 0, 0);
-	DBG_ERROR("sxg: %s ENTER\n", __FUNCTION__);
+	DBG_ERROR("sxg: %s ENTER\n", __func__);
 
 	switch (UcodeSel) {
-	case SXG_UCODE_SAHARA:	// Sahara operational ucode
+	case SXG_UCODE_SAHARA:	/* Sahara operational ucode */
 		numSections = SNumSections;
 		for (i = 0; i < numSections; i++) {
 			sectionSize[i] = SSectionSize[i];
@@ -276,13 +277,13 @@
 	}
 
 	DBG_ERROR("sxg: RESET THE CARD\n");
-	// First, reset the card
+	/* First, reset the card */
 	WRITE_REG(HwRegs->Reset, 0xDEAD, FLUSH);
 
-	// Download each section of the microcode as specified in
-	// its download file.  The *download.c file is generated using
-	// the saharaobjtoc facility which converts the metastep .obj
-	// file to a .c file which contains a two dimentional array.
+	/* Download each section of the microcode as specified in */
+	/* its download file.  The *download.c file is generated using */
+	/* the saharaobjtoc facility which converts the metastep .obj */
+	/* file to a .c file which contains a two dimentional array. */
 	for (Section = 0; Section < numSections; Section++) {
 		DBG_ERROR("sxg: SECTION # %d\n", Section);
 		switch (UcodeSel) {
@@ -294,35 +295,35 @@
 			break;
 		}
 		BaseAddress = sectionStart[Section];
-		ThisSectionSize = sectionSize[Section] / 12;	// Size in instructions
+		ThisSectionSize = sectionSize[Section] / 12;	/* Size in instructions */
 		for (AddressOffset = 0; AddressOffset < ThisSectionSize;
 		     AddressOffset++) {
 			Address = BaseAddress + AddressOffset;
 			ASSERT((Address & ~MICROCODE_ADDRESS_MASK) == 0);
-			// Write instruction bits 31 - 0
+			/* Write instruction bits 31 - 0 */
 			WRITE_REG(HwRegs->UcodeDataLow, *Instruction, FLUSH);
-			// Write instruction bits 63-32
+			/* Write instruction bits 63-32 */
 			WRITE_REG(HwRegs->UcodeDataMiddle, *(Instruction + 1),
 				  FLUSH);
-			// Write instruction bits 95-64
+			/* Write instruction bits 95-64 */
 			WRITE_REG(HwRegs->UcodeDataHigh, *(Instruction + 2),
 				  FLUSH);
-			// Write instruction address with the WRITE bit set
+			/* Write instruction address with the WRITE bit set */
 			WRITE_REG(HwRegs->UcodeAddr,
 				  (Address | MICROCODE_ADDRESS_WRITE), FLUSH);
-			// Sahara bug in the ucode download logic - the write to DataLow
-			// for the next instruction could get corrupted.  To avoid this,
-			// write to DataLow again for this instruction (which may get
-			// corrupted, but it doesn't matter), then increment the address
-			// and write the data for the next instruction to DataLow.  That
-			// write should succeed.
+			/* Sahara bug in the ucode download logic - the write to DataLow */
+			/* for the next instruction could get corrupted.  To avoid this, */
+			/* write to DataLow again for this instruction (which may get */
+			/* corrupted, but it doesn't matter), then increment the address */
+			/* and write the data for the next instruction to DataLow.  That */
+			/* write should succeed. */
 			WRITE_REG(HwRegs->UcodeDataLow, *Instruction, TRUE);
-			// Advance 3 u32S to start of next instruction
+			/* Advance 3 u32S to start of next instruction */
 			Instruction += 3;
 		}
 	}
-	// Now repeat the entire operation reading the instruction back and
-	// checking for parity errors
+	/* Now repeat the entire operation reading the instruction back and */
+	/* checking for parity errors */
 	for (Section = 0; Section < numSections; Section++) {
 		DBG_ERROR("sxg: check SECTION # %d\n", Section);
 		switch (UcodeSel) {
@@ -334,74 +335,74 @@
 			break;
 		}
 		BaseAddress = sectionStart[Section];
-		ThisSectionSize = sectionSize[Section] / 12;	// Size in instructions
+		ThisSectionSize = sectionSize[Section] / 12;	/* Size in instructions */
 		for (AddressOffset = 0; AddressOffset < ThisSectionSize;
 		     AddressOffset++) {
 			Address = BaseAddress + AddressOffset;
-			// Write the address with the READ bit set
+			/* Write the address with the READ bit set */
 			WRITE_REG(HwRegs->UcodeAddr,
 				  (Address | MICROCODE_ADDRESS_READ), FLUSH);
-			// Read it back and check parity bit.
+			/* Read it back and check parity bit. */
 			READ_REG(HwRegs->UcodeAddr, ValueRead);
 			if (ValueRead & MICROCODE_ADDRESS_PARITY) {
 				DBG_ERROR("sxg: %s PARITY ERROR\n",
-					  __FUNCTION__);
+					  __func__);
 
-				return (FALSE);	// Parity error
+				return (FALSE);	/* Parity error */
 			}
 			ASSERT((ValueRead & MICROCODE_ADDRESS_MASK) == Address);
-			// Read the instruction back and compare
+			/* Read the instruction back and compare */
 			READ_REG(HwRegs->UcodeDataLow, ValueRead);
 			if (ValueRead != *Instruction) {
 				DBG_ERROR("sxg: %s MISCOMPARE LOW\n",
-					  __FUNCTION__);
-				return (FALSE);	// Miscompare
+					  __func__);
+				return (FALSE);	/* Miscompare */
 			}
 			READ_REG(HwRegs->UcodeDataMiddle, ValueRead);
 			if (ValueRead != *(Instruction + 1)) {
 				DBG_ERROR("sxg: %s MISCOMPARE MIDDLE\n",
-					  __FUNCTION__);
-				return (FALSE);	// Miscompare
+					  __func__);
+				return (FALSE);	/* Miscompare */
 			}
 			READ_REG(HwRegs->UcodeDataHigh, ValueRead);
 			if (ValueRead != *(Instruction + 2)) {
 				DBG_ERROR("sxg: %s MISCOMPARE HIGH\n",
-					  __FUNCTION__);
-				return (FALSE);	// Miscompare
+					  __func__);
+				return (FALSE);	/* Miscompare */
 			}
-			// Advance 3 u32S to start of next instruction
+			/* Advance 3 u32S to start of next instruction */
 			Instruction += 3;
 		}
 	}
 
-	// Everything OK, Go.
+	/* Everything OK, Go. */
 	WRITE_REG(HwRegs->UcodeAddr, MICROCODE_ADDRESS_GO, FLUSH);
 
-	// Poll the CardUp register to wait for microcode to initialize
-	// Give up after 10,000 attemps (500ms).
+	/* Poll the CardUp register to wait for microcode to initialize */
+	/* Give up after 10,000 attemps (500ms). */
 	for (i = 0; i < 10000; i++) {
 		udelay(50);
 		READ_REG(adapter->UcodeRegs[0].CardUp, ValueRead);
 		if (ValueRead == 0xCAFE) {
-			DBG_ERROR("sxg: %s BOO YA 0xCAFE\n", __FUNCTION__);
+			DBG_ERROR("sxg: %s BOO YA 0xCAFE\n", __func__);
 			break;
 		}
 	}
 	if (i == 10000) {
-		DBG_ERROR("sxg: %s TIMEOUT\n", __FUNCTION__);
+		DBG_ERROR("sxg: %s TIMEOUT\n", __func__);
 
-		return (FALSE);	// Timeout
+		return (FALSE);	/* Timeout */
 	}
-	// Now write the LoadSync register.  This is used to
-	// synchronize with the card so it can scribble on the memory
-	// that contained 0xCAFE from the "CardUp" step above
+	/* Now write the LoadSync register.  This is used to */
+	/* synchronize with the card so it can scribble on the memory */
+	/* that contained 0xCAFE from the "CardUp" step above */
 	if (UcodeSel == SXG_UCODE_SAHARA) {
 		WRITE_REG(adapter->UcodeRegs[0].LoadSync, 0, FLUSH);
 	}
 
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDnldUcd",
 		  adapter, 0, 0, 0);
-	DBG_ERROR("sxg: %s EXIT\n", __FUNCTION__);
+	DBG_ERROR("sxg: %s EXIT\n", __func__);
 
 	return (TRUE);
 }
@@ -420,29 +421,29 @@
 	int status;
 	u32 i;
 	u32 RssIds, IsrCount;
-//      PSXG_XMT_RING                                   XmtRing;
-//      PSXG_RCV_RING                                   RcvRing;
+/*      PSXG_XMT_RING                                   XmtRing; */
+/*      PSXG_RCV_RING                                   RcvRing; */
 
-	DBG_ERROR("%s ENTER\n", __FUNCTION__);
+	DBG_ERROR("%s ENTER\n", __func__);
 
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AllocRes",
 		  adapter, 0, 0, 0);
 
-	// Windows tells us how many CPUs it plans to use for
-	// RSS
+	/* Windows tells us how many CPUs it plans to use for */
+	/* RSS */
 	RssIds = SXG_RSS_CPU_COUNT(adapter);
 	IsrCount = adapter->MsiEnabled ? RssIds : 1;
 
-	DBG_ERROR("%s Setup the spinlocks\n", __FUNCTION__);
+	DBG_ERROR("%s Setup the spinlocks\n", __func__);
 
-	// Allocate spinlocks and initialize listheads first.
+	/* Allocate spinlocks and initialize listheads first. */
 	spin_lock_init(&adapter->RcvQLock);
 	spin_lock_init(&adapter->SglQLock);
 	spin_lock_init(&adapter->XmtZeroLock);
 	spin_lock_init(&adapter->Bit64RegLock);
 	spin_lock_init(&adapter->AdapterLock);
 
-	DBG_ERROR("%s Setup the lists\n", __FUNCTION__);
+	DBG_ERROR("%s Setup the lists\n", __func__);
 
 	InitializeListHead(&adapter->FreeRcvBuffers);
 	InitializeListHead(&adapter->FreeRcvBlocks);
@@ -450,39 +451,39 @@
 	InitializeListHead(&adapter->FreeSglBuffers);
 	InitializeListHead(&adapter->AllSglBuffers);
 
-	// Mark these basic allocations done.  This flags essentially
-	// tells the SxgFreeResources routine that it can grab spinlocks
-	// and reference listheads.
+	/* Mark these basic allocations done.  This flags essentially */
+	/* tells the SxgFreeResources routine that it can grab spinlocks */
+	/* and reference listheads. */
 	adapter->BasicAllocations = TRUE;
-	// Main allocation loop.  Start with the maximum supported by
-	// the microcode and back off if memory allocation
-	// fails.  If we hit a minimum, fail.
+	/* Main allocation loop.  Start with the maximum supported by */
+	/* the microcode and back off if memory allocation */
+	/* fails.  If we hit a minimum, fail. */
 
 	for (;;) {
-		DBG_ERROR("%s Allocate XmtRings size[%lx]\n", __FUNCTION__,
-			  (sizeof(SXG_XMT_RING) * 1));
+		DBG_ERROR("%s Allocate XmtRings size[%x]\n", __func__,
+			  (unsigned int)(sizeof(SXG_XMT_RING) * 1));
 
-		// Start with big items first - receive and transmit rings.  At the moment
-		// I'm going to keep the ring size fixed and adjust the number of
-		// TCBs if we fail.  Later we might consider reducing the ring size as well..
+		/* Start with big items first - receive and transmit rings.  At the moment */
+		/* I'm going to keep the ring size fixed and adjust the number of */
+		/* TCBs if we fail.  Later we might consider reducing the ring size as well.. */
 		adapter->XmtRings = pci_alloc_consistent(adapter->pcidev,
 							 sizeof(SXG_XMT_RING) *
 							 1,
 							 &adapter->PXmtRings);
-		DBG_ERROR("%s XmtRings[%p]\n", __FUNCTION__, adapter->XmtRings);
+		DBG_ERROR("%s XmtRings[%p]\n", __func__, adapter->XmtRings);
 
 		if (!adapter->XmtRings) {
 			goto per_tcb_allocation_failed;
 		}
 		memset(adapter->XmtRings, 0, sizeof(SXG_XMT_RING) * 1);
 
-		DBG_ERROR("%s Allocate RcvRings size[%lx]\n", __FUNCTION__,
-			  (sizeof(SXG_RCV_RING) * 1));
+		DBG_ERROR("%s Allocate RcvRings size[%x]\n", __func__,
+			  (unsigned int)(sizeof(SXG_RCV_RING) * 1));
 		adapter->RcvRings =
 		    pci_alloc_consistent(adapter->pcidev,
 					 sizeof(SXG_RCV_RING) * 1,
 					 &adapter->PRcvRings);
-		DBG_ERROR("%s RcvRings[%p]\n", __FUNCTION__, adapter->RcvRings);
+		DBG_ERROR("%s RcvRings[%p]\n", __func__, adapter->RcvRings);
 		if (!adapter->RcvRings) {
 			goto per_tcb_allocation_failed;
 		}
@@ -490,7 +491,7 @@
 		break;
 
 	      per_tcb_allocation_failed:
-		// an allocation failed.  Free any successful allocations.
+		/* an allocation failed.  Free any successful allocations. */
 		if (adapter->XmtRings) {
 			pci_free_consistent(adapter->pcidev,
 					    sizeof(SXG_XMT_RING) * 4096,
@@ -505,22 +506,22 @@
 					    adapter->PRcvRings);
 			adapter->RcvRings = NULL;
 		}
-		// Loop around and try again....
+		/* Loop around and try again.... */
 	}
 
-	DBG_ERROR("%s Initialize RCV ZERO and XMT ZERO rings\n", __FUNCTION__);
-	// Initialize rcv zero and xmt zero rings
+	DBG_ERROR("%s Initialize RCV ZERO and XMT ZERO rings\n", __func__);
+	/* Initialize rcv zero and xmt zero rings */
 	SXG_INITIALIZE_RING(adapter->RcvRingZeroInfo, SXG_RCV_RING_SIZE);
 	SXG_INITIALIZE_RING(adapter->XmtRingZeroInfo, SXG_XMT_RING_SIZE);
 
-	// Sanity check receive data structure format
+	/* Sanity check receive data structure format */
 	ASSERT((adapter->ReceiveBufferSize == SXG_RCV_DATA_BUFFER_SIZE) ||
 	       (adapter->ReceiveBufferSize == SXG_RCV_JUMBO_BUFFER_SIZE));
 	ASSERT(sizeof(SXG_RCV_DESCRIPTOR_BLOCK) ==
 	       SXG_RCV_DESCRIPTOR_BLOCK_SIZE);
 
-	// Allocate receive data buffers.  We allocate a block of buffers and
-	// a corresponding descriptor block at once.  See sxghw.h:SXG_RCV_BLOCK
+	/* Allocate receive data buffers.  We allocate a block of buffers and */
+	/* a corresponding descriptor block at once.  See sxghw.h:SXG_RCV_BLOCK */
 	for (i = 0; i < SXG_INITIAL_RCV_DATA_BUFFERS;
 	     i += SXG_RCV_DESCRIPTORS_PER_BLOCK) {
 		sxg_allocate_buffer_memory(adapter,
@@ -528,8 +529,8 @@
 							      ReceiveBufferSize),
 					   SXG_BUFFER_TYPE_RCV);
 	}
-	// NBL resource allocation can fail in the 'AllocateComplete' routine, which
-	// doesn't return status.  Make sure we got the number of buffers we requested
+	/* NBL resource allocation can fail in the 'AllocateComplete' routine, which */
+	/* doesn't return status.  Make sure we got the number of buffers we requested */
 	if (adapter->FreeRcvBufferCount < SXG_INITIAL_RCV_DATA_BUFFERS) {
 		SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAResF6",
 			  adapter, adapter->FreeRcvBufferCount, SXG_MAX_ENTRIES,
@@ -537,17 +538,17 @@
 		return (STATUS_RESOURCES);
 	}
 
-	DBG_ERROR("%s Allocate EventRings size[%lx]\n", __FUNCTION__,
-		  (sizeof(SXG_EVENT_RING) * RssIds));
+	DBG_ERROR("%s Allocate EventRings size[%x]\n", __func__,
+		  (unsigned int)(sizeof(SXG_EVENT_RING) * RssIds));
 
-	// Allocate event queues.
+	/* Allocate event queues. */
 	adapter->EventRings = pci_alloc_consistent(adapter->pcidev,
 						   sizeof(SXG_EVENT_RING) *
 						   RssIds,
 						   &adapter->PEventRings);
 
 	if (!adapter->EventRings) {
-		// Caller will call SxgFreeAdapter to clean up above allocations
+		/* Caller will call SxgFreeAdapter to clean up above allocations */
 		SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAResF8",
 			  adapter, SXG_MAX_ENTRIES, 0, 0);
 		status = STATUS_RESOURCES;
@@ -555,12 +556,12 @@
 	}
 	memset(adapter->EventRings, 0, sizeof(SXG_EVENT_RING) * RssIds);
 
-	DBG_ERROR("%s Allocate ISR size[%x]\n", __FUNCTION__, IsrCount);
-	// Allocate ISR
+	DBG_ERROR("%s Allocate ISR size[%x]\n", __func__, IsrCount);
+	/* Allocate ISR */
 	adapter->Isr = pci_alloc_consistent(adapter->pcidev,
 					    IsrCount, &adapter->PIsr);
 	if (!adapter->Isr) {
-		// Caller will call SxgFreeAdapter to clean up above allocations
+		/* Caller will call SxgFreeAdapter to clean up above allocations */
 		SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAResF9",
 			  adapter, SXG_MAX_ENTRIES, 0, 0);
 		status = STATUS_RESOURCES;
@@ -568,10 +569,10 @@
 	}
 	memset(adapter->Isr, 0, sizeof(u32) * IsrCount);
 
-	DBG_ERROR("%s Allocate shared XMT ring zero index location size[%lx]\n",
-		  __FUNCTION__, sizeof(u32));
+	DBG_ERROR("%s Allocate shared XMT ring zero index location size[%x]\n",
+		  __func__, (unsigned int)sizeof(u32));
 
-	// Allocate shared XMT ring zero index location
+	/* Allocate shared XMT ring zero index location */
 	adapter->XmtRingZeroIndex = pci_alloc_consistent(adapter->pcidev,
 							 sizeof(u32),
 							 &adapter->
@@ -587,7 +588,7 @@
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAlcResS",
 		  adapter, SXG_MAX_ENTRIES, 0, 0);
 
-	DBG_ERROR("%s EXIT\n", __FUNCTION__);
+	DBG_ERROR("%s EXIT\n", __func__);
 	return (STATUS_SUCCESS);
 }
 
@@ -606,17 +607,17 @@
 	u16 new_command;
 
 	pci_read_config_word(pcidev, PCI_COMMAND, &pci_command);
-	DBG_ERROR("sxg: %s  PCI command[%4.4x]\n", __FUNCTION__, pci_command);
-	// Set the command register
-	new_command = pci_command | (PCI_COMMAND_MEMORY |	// Memory Space Enable
-				     PCI_COMMAND_MASTER |	// Bus master enable
-				     PCI_COMMAND_INVALIDATE |	// Memory write and invalidate
-				     PCI_COMMAND_PARITY |	// Parity error response
-				     PCI_COMMAND_SERR |	// System ERR
-				     PCI_COMMAND_FAST_BACK);	// Fast back-to-back
+	DBG_ERROR("sxg: %s  PCI command[%4.4x]\n", __func__, pci_command);
+	/* Set the command register */
+	new_command = pci_command | (PCI_COMMAND_MEMORY |	/* Memory Space Enable */
+				     PCI_COMMAND_MASTER |	/* Bus master enable */
+				     PCI_COMMAND_INVALIDATE |	/* Memory write and invalidate */
+				     PCI_COMMAND_PARITY |	/* Parity error response */
+				     PCI_COMMAND_SERR |	/* System ERR */
+				     PCI_COMMAND_FAST_BACK);	/* Fast back-to-back */
 	if (pci_command != new_command) {
 		DBG_ERROR("%s -- Updating PCI COMMAND register %4.4x->%4.4x.\n",
-			  __FUNCTION__, pci_command, new_command);
+			  __func__, pci_command, new_command);
 		pci_write_config_word(pcidev, PCI_COMMAND, new_command);
 	}
 }
@@ -634,9 +635,9 @@
 	ulong mmio_len = 0;
 
 	DBG_ERROR("sxg: %s 2.6 VERSION ENTER jiffies[%lx] cpu %d\n",
-		  __FUNCTION__, jiffies, smp_processor_id());
+		  __func__, jiffies, smp_processor_id());
 
-	// Initialize trace buffer
+	/* Initialize trace buffer */
 #ifdef ATKDBG
 	SxgTraceBuffer = &LSxgTraceBuffer;
 	SXG_TRACE_INIT(SxgTraceBuffer, TRACE_NOISY);
@@ -701,11 +702,11 @@
 		  mmio_start, mmio_len);
 
 	memmapped_ioaddr = ioremap(mmio_start, mmio_len);
-	DBG_ERROR("sxg: %s MEMMAPPED_IOADDR [%p]\n", __FUNCTION__,
+	DBG_ERROR("sxg: %s MEMMAPPED_IOADDR [%p]\n", __func__,
 		  memmapped_ioaddr);
 	if (!memmapped_ioaddr) {
 		DBG_ERROR("%s cannot remap MMIO region %lx @ %lx\n",
-			  __FUNCTION__, mmio_len, mmio_start);
+			  __func__, mmio_len, mmio_start);
 		goto err_out_free_mmio_region;
 	}
 
@@ -727,7 +728,7 @@
 		  memmapped_ioaddr);
 	if (!memmapped_ioaddr) {
 		DBG_ERROR("%s cannot remap MMIO region %lx @ %lx\n",
-			  __FUNCTION__, mmio_len, mmio_start);
+			  __func__, mmio_len, mmio_start);
 		goto err_out_free_mmio_region;
 	}
 
@@ -738,13 +739,13 @@
 	adapter->UcodeRegs = (void *)memmapped_ioaddr;
 
 	adapter->State = SXG_STATE_INITIALIZING;
-	// Maintain a list of all adapters anchored by
-	// the global SxgDriver structure.
+	/* Maintain a list of all adapters anchored by */
+	/* the global SxgDriver structure. */
 	adapter->Next = SxgDriver.Adapters;
 	SxgDriver.Adapters = adapter;
 	adapter->AdapterID = ++SxgDriver.AdapterID;
 
-	// Initialize CRC table used to determine multicast hash
+	/* Initialize CRC table used to determine multicast hash */
 	sxg_mcast_init_crc32();
 
 	adapter->JumboEnabled = FALSE;
@@ -757,18 +758,18 @@
 		adapter->ReceiveBufferSize = SXG_RCV_DATA_BUFFER_SIZE;
 	}
 
-//    status = SXG_READ_EEPROM(adapter);
-//    if (!status) {
-//        goto sxg_init_bad;
-//    }
+/*    status = SXG_READ_EEPROM(adapter); */
+/*    if (!status) { */
+/*        goto sxg_init_bad; */
+/*    } */
 
-	DBG_ERROR("sxg: %s ENTER sxg_config_pci\n", __FUNCTION__);
+	DBG_ERROR("sxg: %s ENTER sxg_config_pci\n", __func__);
 	sxg_config_pci(pcidev);
-	DBG_ERROR("sxg: %s EXIT sxg_config_pci\n", __FUNCTION__);
+	DBG_ERROR("sxg: %s EXIT sxg_config_pci\n", __func__);
 
-	DBG_ERROR("sxg: %s ENTER sxg_init_driver\n", __FUNCTION__);
+	DBG_ERROR("sxg: %s ENTER sxg_init_driver\n", __func__);
 	sxg_init_driver();
-	DBG_ERROR("sxg: %s EXIT sxg_init_driver\n", __FUNCTION__);
+	DBG_ERROR("sxg: %s EXIT sxg_init_driver\n", __func__);
 
 	adapter->vendid = pci_tbl_entry->vendor;
 	adapter->devid = pci_tbl_entry->device;
@@ -780,23 +781,23 @@
 	adapter->irq = pcidev->irq;
 	adapter->next_netdevice = head_netdevice;
 	head_netdevice = netdev;
-//      adapter->chipid = chip_idx;
-	adapter->port = 0;	//adapter->functionnumber;
+/*      adapter->chipid = chip_idx; */
+	adapter->port = 0;	/*adapter->functionnumber; */
 	adapter->cardindex = adapter->port;
 
-	// Allocate memory and other resources
-	DBG_ERROR("sxg: %s ENTER sxg_allocate_resources\n", __FUNCTION__);
+	/* Allocate memory and other resources */
+	DBG_ERROR("sxg: %s ENTER sxg_allocate_resources\n", __func__);
 	status = sxg_allocate_resources(adapter);
 	DBG_ERROR("sxg: %s EXIT sxg_allocate_resources status %x\n",
-		  __FUNCTION__, status);
+		  __func__, status);
 	if (status != STATUS_SUCCESS) {
 		goto err_out_unmap;
 	}
 
-	DBG_ERROR("sxg: %s ENTER sxg_download_microcode\n", __FUNCTION__);
+	DBG_ERROR("sxg: %s ENTER sxg_download_microcode\n", __func__);
 	if (sxg_download_microcode(adapter, SXG_UCODE_SAHARA)) {
 		DBG_ERROR("sxg: %s ENTER sxg_adapter_set_hwaddr\n",
-			  __FUNCTION__);
+			  __func__);
 		sxg_adapter_set_hwaddr(adapter);
 	} else {
 		adapter->state = ADAPT_FAIL;
@@ -819,7 +820,7 @@
 #endif
 
 	strcpy(netdev->name, "eth%d");
-//  strcpy(netdev->name, pci_name(pcidev));
+/*  strcpy(netdev->name, pci_name(pcidev)); */
 	if ((err = register_netdev(netdev))) {
 		DBG_ERROR("Cannot register net device, aborting. %s\n",
 			  netdev->name);
@@ -832,11 +833,11 @@
 	     netdev->dev_addr[1], netdev->dev_addr[2], netdev->dev_addr[3],
 	     netdev->dev_addr[4], netdev->dev_addr[5]);
 
-//sxg_init_bad:
+/*sxg_init_bad: */
 	ASSERT(status == FALSE);
-//      sxg_free_adapter(adapter);
+/*      sxg_free_adapter(adapter); */
 
-	DBG_ERROR("sxg: %s EXIT status[%x] jiffies[%lx] cpu %d\n", __FUNCTION__,
+	DBG_ERROR("sxg: %s EXIT status[%x] jiffies[%lx] cpu %d\n", __func__,
 		  status, jiffies, smp_processor_id());
 	return status;
 
@@ -848,7 +849,7 @@
 
       err_out_exit_sxg_probe:
 
-	DBG_ERROR("%s EXIT jiffies[%lx] cpu %d\n", __FUNCTION__, jiffies,
+	DBG_ERROR("%s EXIT jiffies[%lx] cpu %d\n", __func__, jiffies,
 		  smp_processor_id());
 
 	return -ENODEV;
@@ -874,12 +875,12 @@
 {
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DisIntr",
 		  adapter, adapter->InterruptsEnabled, 0, 0);
-	// For now, RSS is disabled with line based interrupts
+	/* For now, RSS is disabled with line based interrupts */
 	ASSERT(adapter->RssEnabled == FALSE);
 	ASSERT(adapter->MsiEnabled == FALSE);
-	//
-	// Turn off interrupts by writing to the icr register.
-	//
+	/* */
+	/* Turn off interrupts by writing to the icr register. */
+	/* */
 	WRITE_REG(adapter->UcodeRegs[0].Icr, SXG_ICR(0, SXG_ICR_DISABLE), TRUE);
 
 	adapter->InterruptsEnabled = 0;
@@ -905,12 +906,12 @@
 {
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "EnIntr",
 		  adapter, adapter->InterruptsEnabled, 0, 0);
-	// For now, RSS is disabled with line based interrupts
+	/* For now, RSS is disabled with line based interrupts */
 	ASSERT(adapter->RssEnabled == FALSE);
 	ASSERT(adapter->MsiEnabled == FALSE);
-	//
-	// Turn on interrupts by writing to the icr register.
-	//
+	/* */
+	/* Turn on interrupts by writing to the icr register. */
+	/* */
 	WRITE_REG(adapter->UcodeRegs[0].Icr, SXG_ICR(0, SXG_ICR_ENABLE), TRUE);
 
 	adapter->InterruptsEnabled = 1;
@@ -935,29 +936,29 @@
 {
 	p_net_device dev = (p_net_device) dev_id;
 	p_adapter_t adapter = (p_adapter_t) netdev_priv(dev);
-//      u32                 CpuMask = 0, i;
+/*      u32                 CpuMask = 0, i; */
 
 	adapter->Stats.NumInts++;
 	if (adapter->Isr[0] == 0) {
-		// The SLIC driver used to experience a number of spurious interrupts
-		// due to the delay associated with the masking of the interrupt
-		// (we'd bounce back in here).  If we see that again with Sahara,
-		// add a READ_REG of the Icr register after the WRITE_REG below.
+		/* The SLIC driver used to experience a number of spurious interrupts */
+		/* due to the delay associated with the masking of the interrupt */
+		/* (we'd bounce back in here).  If we see that again with Sahara, */
+		/* add a READ_REG of the Icr register after the WRITE_REG below. */
 		adapter->Stats.FalseInts++;
 		return IRQ_NONE;
 	}
-	//
-	// Move the Isr contents and clear the value in
-	// shared memory, and mask interrupts
-	//
+	/* */
+	/* Move the Isr contents and clear the value in */
+	/* shared memory, and mask interrupts */
+	/* */
 	adapter->IsrCopy[0] = adapter->Isr[0];
 	adapter->Isr[0] = 0;
 	WRITE_REG(adapter->UcodeRegs[0].Icr, SXG_ICR(0, SXG_ICR_MASK), TRUE);
-//      ASSERT(adapter->IsrDpcsPending == 0);
-#if XXXTODO			// RSS Stuff
-	// If RSS is enabled and the ISR specifies
-	// SXG_ISR_EVENT, then schedule DPC's
-	// based on event queues.
+/*      ASSERT(adapter->IsrDpcsPending == 0); */
+#if XXXTODO			/* RSS Stuff */
+	/* If RSS is enabled and the ISR specifies */
+	/* SXG_ISR_EVENT, then schedule DPC's */
+	/* based on event queues. */
 	if (adapter->RssEnabled && (adapter->IsrCopy[0] & SXG_ISR_EVENT)) {
 		for (i = 0;
 		     i < adapter->RssSystemInfo->ProcessorInfo.RssCpuCount;
@@ -973,8 +974,8 @@
 			}
 		}
 	}
-	// Now, either schedule the CPUs specified by the CpuMask,
-	// or queue default
+	/* Now, either schedule the CPUs specified by the CpuMask, */
+	/* or queue default */
 	if (CpuMask) {
 		*QueueDefault = FALSE;
 	} else {
@@ -983,9 +984,9 @@
 	}
 	*TargetCpus = CpuMask;
 #endif
-	//
-	//  There are no DPCs in Linux, so call the handler now
-	//
+	/* */
+	/*  There are no DPCs in Linux, so call the handler now */
+	/* */
 	sxg_handle_interrupt(adapter);
 
 	return IRQ_HANDLED;
@@ -993,7 +994,7 @@
 
 static void sxg_handle_interrupt(p_adapter_t adapter)
 {
-//    unsigned char           RssId   = 0;
+/*    unsigned char           RssId   = 0; */
 	u32 NewIsr;
 
 	if (adapter->Stats.RcvNoBuffer < 5) {
@@ -1002,32 +1003,32 @@
 	}
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "HndlIntr",
 		  adapter, adapter->IsrCopy[0], 0, 0);
-	// For now, RSS is disabled with line based interrupts
+	/* For now, RSS is disabled with line based interrupts */
 	ASSERT(adapter->RssEnabled == FALSE);
 	ASSERT(adapter->MsiEnabled == FALSE);
 	ASSERT(adapter->IsrCopy[0]);
-/////////////////////////////
+/*/////////////////////////// */
 
-	// Always process the event queue.
+	/* Always process the event queue. */
 	sxg_process_event_queue(adapter,
 				(adapter->RssEnabled ? /*RssId */ 0 : 0));
 
-#if XXXTODO			// RSS stuff
+#if XXXTODO			/* RSS stuff */
 	if (--adapter->IsrDpcsPending) {
-		// We're done.
+		/* We're done. */
 		ASSERT(adapter->RssEnabled);
 		SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DPCsPend",
 			  adapter, 0, 0, 0);
 		return;
 	}
 #endif
-	//
-	// Last (or only) DPC processes the ISR and clears the interrupt.
-	//
+	/* */
+	/* Last (or only) DPC processes the ISR and clears the interrupt. */
+	/* */
 	NewIsr = sxg_process_isr(adapter, 0);
-	//
-	// Reenable interrupts
-	//
+	/* */
+	/* Reenable interrupts */
+	/* */
 	adapter->IsrCopy[0] = 0;
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "ClearIsr",
 		  adapter, NewIsr, 0, 0);
@@ -1063,75 +1064,75 @@
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "ProcIsr",
 		  adapter, Isr, 0, 0);
 
-	// Error
+	/* Error */
 	if (Isr & SXG_ISR_ERR) {
 		if (Isr & SXG_ISR_PDQF) {
 			adapter->Stats.PdqFull++;
-			DBG_ERROR("%s: SXG_ISR_ERR  PDQF!!\n", __FUNCTION__);
+			DBG_ERROR("%s: SXG_ISR_ERR  PDQF!!\n", __func__);
 		}
-		// No host buffer
+		/* No host buffer */
 		if (Isr & SXG_ISR_RMISS) {
-			// There is a bunch of code in the SLIC driver which
-			// attempts to process more receive events per DPC
-			// if we start to fall behind.  We'll probably
-			// need to do something similar here, but hold
-			// off for now.  I don't want to make the code more
-			// complicated than strictly needed.
+			/* There is a bunch of code in the SLIC driver which */
+			/* attempts to process more receive events per DPC */
+			/* if we start to fall behind.  We'll probably */
+			/* need to do something similar here, but hold */
+			/* off for now.  I don't want to make the code more */
+			/* complicated than strictly needed. */
 			adapter->Stats.RcvNoBuffer++;
 			if (adapter->Stats.RcvNoBuffer < 5) {
 				DBG_ERROR("%s: SXG_ISR_ERR  RMISS!!\n",
-					  __FUNCTION__);
+					  __func__);
 			}
 		}
-		// Card crash
+		/* Card crash */
 		if (Isr & SXG_ISR_DEAD) {
-			// Set aside the crash info and set the adapter state to RESET
+			/* Set aside the crash info and set the adapter state to RESET */
 			adapter->CrashCpu =
 			    (unsigned char)((Isr & SXG_ISR_CPU) >>
 					    SXG_ISR_CPU_SHIFT);
 			adapter->CrashLocation = (ushort) (Isr & SXG_ISR_CRASH);
 			adapter->Dead = TRUE;
-			DBG_ERROR("%s: ISR_DEAD %x, CPU: %d\n", __FUNCTION__,
+			DBG_ERROR("%s: ISR_DEAD %x, CPU: %d\n", __func__,
 				  adapter->CrashLocation, adapter->CrashCpu);
 		}
-		// Event ring full
+		/* Event ring full */
 		if (Isr & SXG_ISR_ERFULL) {
-			// Same issue as RMISS, really.  This means the
-			// host is falling behind the card.  Need to increase
-			// event ring size, process more events per interrupt,
-			// and/or reduce/remove interrupt aggregation.
+			/* Same issue as RMISS, really.  This means the */
+			/* host is falling behind the card.  Need to increase */
+			/* event ring size, process more events per interrupt, */
+			/* and/or reduce/remove interrupt aggregation. */
 			adapter->Stats.EventRingFull++;
 			DBG_ERROR("%s: SXG_ISR_ERR  EVENT RING FULL!!\n",
-				  __FUNCTION__);
+				  __func__);
 		}
-		// Transmit drop - no DRAM buffers or XMT error
+		/* Transmit drop - no DRAM buffers or XMT error */
 		if (Isr & SXG_ISR_XDROP) {
 			adapter->Stats.XmtDrops++;
 			adapter->Stats.XmtErrors++;
-			DBG_ERROR("%s: SXG_ISR_ERR  XDROP!!\n", __FUNCTION__);
+			DBG_ERROR("%s: SXG_ISR_ERR  XDROP!!\n", __func__);
 		}
 	}
-	// Slowpath send completions
+	/* Slowpath send completions */
 	if (Isr & SXG_ISR_SPSEND) {
 		sxg_complete_slow_send(adapter);
 	}
-	// Dump
+	/* Dump */
 	if (Isr & SXG_ISR_UPC) {
-		ASSERT(adapter->DumpCmdRunning);	// Maybe change when debug is added..
+		ASSERT(adapter->DumpCmdRunning);	/* Maybe change when debug is added.. */
 		adapter->DumpCmdRunning = FALSE;
 	}
-	// Link event
+	/* Link event */
 	if (Isr & SXG_ISR_LINK) {
 		sxg_link_event(adapter);
 	}
-	// Debug - breakpoint hit
+	/* Debug - breakpoint hit */
 	if (Isr & SXG_ISR_BREAK) {
-		// At the moment AGDB isn't written to support interactive
-		// debug sessions.  When it is, this interrupt will be used
-		// to signal AGDB that it has hit a breakpoint.  For now, ASSERT.
+		/* At the moment AGDB isn't written to support interactive */
+		/* debug sessions.  When it is, this interrupt will be used */
+		/* to signal AGDB that it has hit a breakpoint.  For now, ASSERT. */
 		ASSERT(0);
 	}
-	// Heartbeat response
+	/* Heartbeat response */
 	if (Isr & SXG_ISR_PING) {
 		adapter->PingOutstanding = FALSE;
 	}
@@ -1171,39 +1172,39 @@
 	       (adapter->State == SXG_STATE_PAUSING) ||
 	       (adapter->State == SXG_STATE_PAUSED) ||
 	       (adapter->State == SXG_STATE_HALTING));
-	// We may still have unprocessed events on the queue if
-	// the card crashed.  Don't process them.
+	/* We may still have unprocessed events on the queue if */
+	/* the card crashed.  Don't process them. */
 	if (adapter->Dead) {
 		return (0);
 	}
-	// In theory there should only be a single processor that
-	// accesses this queue, and only at interrupt-DPC time.  So
-	// we shouldn't need a lock for any of this.
+	/* In theory there should only be a single processor that */
+	/* accesses this queue, and only at interrupt-DPC time.  So */
+	/* we shouldn't need a lock for any of this. */
 	while (Event->Status & EVENT_STATUS_VALID) {
 		SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "Event",
 			  Event, Event->Code, Event->Status,
 			  adapter->NextEvent);
 		switch (Event->Code) {
 		case EVENT_CODE_BUFFERS:
-			ASSERT(!(Event->CommandIndex & 0xFF00));	// SXG_RING_INFO Head & Tail == unsigned char
-			//
+			ASSERT(!(Event->CommandIndex & 0xFF00));	/* SXG_RING_INFO Head & Tail == unsigned char */
+			/* */
 			sxg_complete_descriptor_blocks(adapter,
 						       Event->CommandIndex);
-			//
+			/* */
 			break;
 		case EVENT_CODE_SLOWRCV:
 			--adapter->RcvBuffersOnCard;
 			if ((skb = sxg_slow_receive(adapter, Event))) {
 				u32 rx_bytes;
 #ifdef LINUX_HANDLES_RCV_INDICATION_LISTS
-				// Add it to our indication list
+				/* Add it to our indication list */
 				SXG_ADD_RCV_PACKET(adapter, skb, prev_skb,
 						   IndicationList, num_skbs);
-				//  In Linux, we just pass up each skb to the protocol above at this point,
-				//  there is no capability of an indication list.
+				/*  In Linux, we just pass up each skb to the protocol above at this point, */
+				/*  there is no capability of an indication list. */
 #else
-// CHECK            skb_pull(skb, INIC_RCVBUF_HEADSIZE);
-				rx_bytes = Event->Length;	// (rcvbuf->length & IRHDDR_FLEN_MSK);
+/* CHECK            skb_pull(skb, INIC_RCVBUF_HEADSIZE); */
+				rx_bytes = Event->Length;	/* (rcvbuf->length & IRHDDR_FLEN_MSK); */
 				skb_put(skb, rx_bytes);
 				adapter->stats.rx_packets++;
 				adapter->stats.rx_bytes += rx_bytes;
@@ -1218,43 +1219,43 @@
 			break;
 		default:
 			DBG_ERROR("%s: ERROR  Invalid EventCode %d\n",
-				  __FUNCTION__, Event->Code);
-//                      ASSERT(0);
+				  __func__, Event->Code);
+/*                      ASSERT(0); */
 		}
-		// See if we need to restock card receive buffers.
-		// There are two things to note here:
-		//      First - This test is not SMP safe.  The
-		//              adapter->BuffersOnCard field is protected via atomic interlocked calls, but
-		//              we do not protect it with respect to these tests.  The only way to do that
-		//      is with a lock, and I don't want to grab a lock every time we adjust the
-		//      BuffersOnCard count.  Instead, we allow the buffer replenishment to be off
-		//      once in a while.  The worst that can happen is the card is given one
-		//      more-or-less descriptor block than the arbitrary value we've chosen.
-		//      No big deal
-		//      In short DO NOT ADD A LOCK HERE, OR WHERE RcvBuffersOnCard is adjusted.
-		//      Second - We expect this test to rarely evaluate to true.  We attempt to
-		//      refill descriptor blocks as they are returned to us
-		//      (sxg_complete_descriptor_blocks), so The only time this should evaluate
-		//      to true is when sxg_complete_descriptor_blocks failed to allocate
-		//              receive buffers.
+		/* See if we need to restock card receive buffers. */
+		/* There are two things to note here: */
+		/*      First - This test is not SMP safe.  The */
+		/*              adapter->BuffersOnCard field is protected via atomic interlocked calls, but */
+		/*              we do not protect it with respect to these tests.  The only way to do that */
+		/*      is with a lock, and I don't want to grab a lock every time we adjust the */
+		/*      BuffersOnCard count.  Instead, we allow the buffer replenishment to be off */
+		/*      once in a while.  The worst that can happen is the card is given one */
+		/*      more-or-less descriptor block than the arbitrary value we've chosen. */
+		/*      No big deal */
+		/*      In short DO NOT ADD A LOCK HERE, OR WHERE RcvBuffersOnCard is adjusted. */
+		/*      Second - We expect this test to rarely evaluate to true.  We attempt to */
+		/*      refill descriptor blocks as they are returned to us */
+		/*      (sxg_complete_descriptor_blocks), so The only time this should evaluate */
+		/*      to true is when sxg_complete_descriptor_blocks failed to allocate */
+		/*              receive buffers. */
 		if (adapter->RcvBuffersOnCard < SXG_RCV_DATA_BUFFERS) {
 			sxg_stock_rcv_buffers(adapter);
 		}
-		// It's more efficient to just set this to zero.
-		// But clearing the top bit saves potential debug info...
+		/* It's more efficient to just set this to zero. */
+		/* But clearing the top bit saves potential debug info... */
 		Event->Status &= ~EVENT_STATUS_VALID;
-		// Advanct to the next event
+		/* Advanct to the next event */
 		SXG_ADVANCE_INDEX(adapter->NextEvent[RssId], EVENT_RING_SIZE);
 		Event = &EventRing->Ring[adapter->NextEvent[RssId]];
 		EventsProcessed++;
 		if (EventsProcessed == EVENT_RING_BATCH) {
-			// Release a batch of events back to the card
+			/* Release a batch of events back to the card */
 			WRITE_REG(adapter->UcodeRegs[RssId].EventRelease,
 				  EVENT_RING_BATCH, FALSE);
 			EventsProcessed = 0;
-			// If we've processed our batch limit, break out of the
-			// loop and return SXG_ISR_EVENT to arrange for us to
-			// be called again
+			/* If we've processed our batch limit, break out of the */
+			/* loop and return SXG_ISR_EVENT to arrange for us to */
+			/* be called again */
 			if (Batches++ == EVENT_BATCH_LIMIT) {
 				SXG_TRACE(TRACE_SXG, SxgTraceBuffer,
 					  TRACE_NOISY, "EvtLimit", Batches,
@@ -1265,14 +1266,14 @@
 		}
 	}
 #ifdef LINUX_HANDLES_RCV_INDICATION_LISTS
-	//
-	// Indicate any received dumb-nic frames
-	//
+	/* */
+	/* Indicate any received dumb-nic frames */
+	/* */
 	SXG_INDICATE_PACKETS(adapter, IndicationList, num_skbs);
 #endif
-	//
-	// Release events back to the card.
-	//
+	/* */
+	/* Release events back to the card. */
+	/* */
 	if (EventsProcessed) {
 		WRITE_REG(adapter->UcodeRegs[RssId].EventRelease,
 			  EventsProcessed, FALSE);
@@ -1299,43 +1300,43 @@
 	u32 *ContextType;
 	PSXG_CMD XmtCmd;
 
-	// NOTE - This lock is dropped and regrabbed in this loop.
-	// This means two different processors can both be running
-	// through this loop. Be *very* careful.
+	/* NOTE - This lock is dropped and regrabbed in this loop. */
+	/* This means two different processors can both be running */
+	/* through this loop. Be *very* careful. */
 	spin_lock(&adapter->XmtZeroLock);
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "CmpSnds",
 		  adapter, XmtRingInfo->Head, XmtRingInfo->Tail, 0);
 
 	while (XmtRingInfo->Tail != *adapter->XmtRingZeroIndex) {
-		// Locate the current Cmd (ring descriptor entry), and
-		// associated SGL, and advance the tail
+		/* Locate the current Cmd (ring descriptor entry), and */
+		/* associated SGL, and advance the tail */
 		SXG_RETURN_CMD(XmtRing, XmtRingInfo, XmtCmd, ContextType);
 		ASSERT(ContextType);
 		SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "CmpSnd",
 			  XmtRingInfo->Head, XmtRingInfo->Tail, XmtCmd, 0);
-		// Clear the SGL field.
+		/* Clear the SGL field. */
 		XmtCmd->Sgl = 0;
 
 		switch (*ContextType) {
 		case SXG_SGL_DUMB:
 			{
 				struct sk_buff *skb;
-				// Dumb-nic send.  Command context is the dumb-nic SGL
+				/* Dumb-nic send.  Command context is the dumb-nic SGL */
 				skb = (struct sk_buff *)ContextType;
-				// Complete the send
+				/* Complete the send */
 				SXG_TRACE(TRACE_SXG, SxgTraceBuffer,
 					  TRACE_IMPORTANT, "DmSndCmp", skb, 0,
 					  0, 0);
 				ASSERT(adapter->Stats.XmtQLen);
-				adapter->Stats.XmtQLen--;	// within XmtZeroLock
+				adapter->Stats.XmtQLen--;	/* within XmtZeroLock */
 				adapter->Stats.XmtOk++;
-				// Now drop the lock and complete the send back to
-				// Microsoft.  We need to drop the lock because
-				// Microsoft can come back with a chimney send, which
-				// results in a double trip in SxgTcpOuput
+				/* Now drop the lock and complete the send back to */
+				/* Microsoft.  We need to drop the lock because */
+				/* Microsoft can come back with a chimney send, which */
+				/* results in a double trip in SxgTcpOuput */
 				spin_unlock(&adapter->XmtZeroLock);
 				SXG_COMPLETE_DUMB_SEND(adapter, skb);
-				// and reacquire..
+				/* and reacquire.. */
 				spin_lock(&adapter->XmtZeroLock);
 			}
 			break;
@@ -1371,7 +1372,7 @@
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "SlowRcv", Event,
 		  RcvDataBufferHdr, RcvDataBufferHdr->State,
 		  RcvDataBufferHdr->VirtualAddress);
-	// Drop rcv frames in non-running state
+	/* Drop rcv frames in non-running state */
 	switch (adapter->State) {
 	case SXG_STATE_RUNNING:
 		break;
@@ -1384,12 +1385,12 @@
 		goto drop;
 	}
 
-	// Change buffer state to UPSTREAM
+	/* Change buffer state to UPSTREAM */
 	RcvDataBufferHdr->State = SXG_BUFFER_UPSTREAM;
 	if (Event->Status & EVENT_STATUS_RCVERR) {
 		SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "RcvError",
 			  Event, Event->Status, Event->HostHandle, 0);
-		// XXXTODO - Remove this print later
+		/* XXXTODO - Remove this print later */
 		DBG_ERROR("SXG: Receive error %x\n", *(u32 *)
 			  SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr));
 		sxg_process_rcv_error(adapter, *(u32 *)
@@ -1397,8 +1398,8 @@
 				      (RcvDataBufferHdr));
 		goto drop;
 	}
-#if XXXTODO			// VLAN stuff
-	// If there's a VLAN tag, extract it and validate it
+#if XXXTODO			/* VLAN stuff */
+	/* If there's a VLAN tag, extract it and validate it */
 	if (((p_ether_header) (SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr)))->
 	    EtherType == ETHERTYPE_VLAN) {
 		if (SxgExtractVlanHeader(adapter, RcvDataBufferHdr, Event) !=
@@ -1411,9 +1412,9 @@
 		}
 	}
 #endif
-	//
-	// Dumb-nic frame.  See if it passes our mac filter and update stats
-	//
+	/* */
+	/* Dumb-nic frame.  See if it passes our mac filter and update stats */
+	/* */
 	if (!sxg_mac_filter(adapter, (p_ether_header)
 			    SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr),
 			    Event->Length)) {
@@ -1427,9 +1428,9 @@
 
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "DumbRcv",
 		  RcvDataBufferHdr, Packet, Event->Length, 0);
-	//
-	// Lastly adjust the receive packet length.
-	//
+	/* */
+	/* Lastly adjust the receive packet length. */
+	/* */
 	SXG_ADJUST_RCV_PACKET(Packet, RcvDataBufferHdr, Event);
 
 	return (Packet);
@@ -1541,7 +1542,7 @@
 
 	if (SXG_MULTICAST_PACKET(EtherHdr)) {
 		if (SXG_BROADCAST_PACKET(EtherHdr)) {
-			// broadcast
+			/* broadcast */
 			if (adapter->MacFilter & MAC_BCAST) {
 				adapter->Stats.DumbRcvBcastPkts++;
 				adapter->Stats.DumbRcvBcastBytes += length;
@@ -1550,7 +1551,7 @@
 				return (TRUE);
 			}
 		} else {
-			// multicast
+			/* multicast */
 			if (adapter->MacFilter & MAC_ALLMCAST) {
 				adapter->Stats.DumbRcvMcastPkts++;
 				adapter->Stats.DumbRcvMcastBytes += length;
@@ -1580,9 +1581,9 @@
 			}
 		}
 	} else if (adapter->MacFilter & MAC_DIRECTED) {
-		// Not broadcast or multicast.  Must be directed at us or
-		// the card is in promiscuous mode.  Either way, consider it
-		// ours if MAC_DIRECTED is set
+		/* Not broadcast or multicast.  Must be directed at us or */
+		/* the card is in promiscuous mode.  Either way, consider it */
+		/* ours if MAC_DIRECTED is set */
 		adapter->Stats.DumbRcvUcastPkts++;
 		adapter->Stats.DumbRcvUcastBytes += length;
 		adapter->Stats.DumbRcvPkts++;
@@ -1590,7 +1591,7 @@
 		return (TRUE);
 	}
 	if (adapter->MacFilter & MAC_PROMISC) {
-		// Whatever it is, keep it.
+		/* Whatever it is, keep it. */
 		adapter->Stats.DumbRcvPkts++;
 		adapter->Stats.DumbRcvBytes += length;
 		return (TRUE);
@@ -1606,7 +1607,7 @@
 
 		DBG_ERROR
 		    ("sxg: %s AllocAdaptRsrcs adapter[%p] dev->irq[%x] %x\n",
-		     __FUNCTION__, adapter, adapter->netdev->irq, NR_IRQS);
+		     __func__, adapter, adapter->netdev->irq, NR_IRQS);
 
 		spin_unlock_irqrestore(&sxg_global.driver_lock,
 				       sxg_global.flags);
@@ -1625,18 +1626,18 @@
 		}
 		adapter->intrregistered = 1;
 		adapter->IntRegistered = TRUE;
-		// Disable RSS with line-based interrupts
+		/* Disable RSS with line-based interrupts */
 		adapter->MsiEnabled = FALSE;
 		adapter->RssEnabled = FALSE;
 		DBG_ERROR("sxg: %s AllocAdaptRsrcs adapter[%p] dev->irq[%x]\n",
-			  __FUNCTION__, adapter, adapter->netdev->irq);
+			  __func__, adapter, adapter->netdev->irq);
 	}
 	return (STATUS_SUCCESS);
 }
 
 static void sxg_deregister_interrupt(p_adapter_t adapter)
 {
-	DBG_ERROR("sxg: %s ENTER adapter[%p]\n", __FUNCTION__, adapter);
+	DBG_ERROR("sxg: %s ENTER adapter[%p]\n", __func__, adapter);
 #if XXXTODO
 	slic_init_cleanup(adapter);
 #endif
@@ -1651,7 +1652,7 @@
 	adapter->rcv_broadcasts = 0;
 	adapter->rcv_multicasts = 0;
 	adapter->rcv_unicasts = 0;
-	DBG_ERROR("sxg: %s EXIT\n", __FUNCTION__);
+	DBG_ERROR("sxg: %s EXIT\n", __func__);
 }
 
 /*
@@ -1666,7 +1667,7 @@
 	int status = 0;
 
 	DBG_ERROR("sxg: %s (%s) ENTER states[%d:%d:%d] flags[%x]\n",
-		  __FUNCTION__, adapter->netdev->name,
+		  __func__, adapter->netdev->name,
 		  adapter->queues_initialized, adapter->state,
 		  adapter->linkstate, dev->flags);
 
@@ -1680,7 +1681,7 @@
 	adapter->devflags_prev = dev->flags;
 	adapter->macopts = MAC_DIRECTED;
 	if (dev->flags) {
-		DBG_ERROR("sxg: %s (%s) Set MAC options: ", __FUNCTION__,
+		DBG_ERROR("sxg: %s (%s) Set MAC options: ", __func__,
 			  adapter->netdev->name);
 		if (dev->flags & IFF_BROADCAST) {
 			adapter->macopts |= MAC_BCAST;
@@ -1713,7 +1714,7 @@
 	/*
 	 *    clear any pending events, then enable interrupts
 	 */
-	DBG_ERROR("sxg: %s ENABLE interrupts(slic)\n", __FUNCTION__);
+	DBG_ERROR("sxg: %s ENABLE interrupts(slic)\n", __func__);
 
 	return (STATUS_SUCCESS);
 }
@@ -1724,11 +1725,11 @@
 	int status;
 
 	ASSERT(adapter);
-	DBG_ERROR("sxg: %s adapter->activated[%d]\n", __FUNCTION__,
+	DBG_ERROR("sxg: %s adapter->activated[%d]\n", __func__,
 		  adapter->activated);
 	DBG_ERROR
 	    ("sxg: %s (%s): [jiffies[%lx] cpu %d] dev[%p] adapt[%p] port[%d]\n",
-	     __FUNCTION__, adapter->netdev->name, jiffies, smp_processor_id(),
+	     __func__, adapter->netdev->name, jiffies, smp_processor_id(),
 	     adapter->netdev, adapter, adapter->port);
 
 	netif_stop_queue(adapter->netdev);
@@ -1738,16 +1739,16 @@
 		sxg_global.num_sxg_ports_active++;
 		adapter->activated = 1;
 	}
-	// Initialize the adapter
-	DBG_ERROR("sxg: %s ENTER sxg_initialize_adapter\n", __FUNCTION__);
+	/* Initialize the adapter */
+	DBG_ERROR("sxg: %s ENTER sxg_initialize_adapter\n", __func__);
 	status = sxg_initialize_adapter(adapter);
 	DBG_ERROR("sxg: %s EXIT sxg_initialize_adapter status[%x]\n",
-		  __FUNCTION__, status);
+		  __func__, status);
 
 	if (status == STATUS_SUCCESS) {
-		DBG_ERROR("sxg: %s ENTER sxg_if_init\n", __FUNCTION__);
+		DBG_ERROR("sxg: %s ENTER sxg_if_init\n", __func__);
 		status = sxg_if_init(adapter);
-		DBG_ERROR("sxg: %s EXIT sxg_if_init status[%x]\n", __FUNCTION__,
+		DBG_ERROR("sxg: %s EXIT sxg_if_init status[%x]\n", __func__,
 			  status);
 	}
 
@@ -1760,12 +1761,12 @@
 				       sxg_global.flags);
 		return (status);
 	}
-	DBG_ERROR("sxg: %s ENABLE ALL INTERRUPTS\n", __FUNCTION__);
+	DBG_ERROR("sxg: %s ENABLE ALL INTERRUPTS\n", __func__);
 
-	// Enable interrupts
+	/* Enable interrupts */
 	SXG_ENABLE_ALL_INTERRUPTS(adapter);
 
-	DBG_ERROR("sxg: %s EXIT\n", __FUNCTION__);
+	DBG_ERROR("sxg: %s EXIT\n", __func__);
 
 	spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags);
 	return STATUS_SUCCESS;
@@ -1779,27 +1780,27 @@
 	p_adapter_t adapter = (p_adapter_t) netdev_priv(dev);
 
 	ASSERT(adapter);
-	DBG_ERROR("sxg: %s ENTER dev[%p] adapter[%p]\n", __FUNCTION__, dev,
+	DBG_ERROR("sxg: %s ENTER dev[%p] adapter[%p]\n", __func__, dev,
 		  adapter);
 	sxg_deregister_interrupt(adapter);
 	sxg_unmap_mmio_space(adapter);
-	DBG_ERROR("sxg: %s unregister_netdev\n", __FUNCTION__);
+	DBG_ERROR("sxg: %s unregister_netdev\n", __func__);
 	unregister_netdev(dev);
 
 	mmio_start = pci_resource_start(pcidev, 0);
 	mmio_len = pci_resource_len(pcidev, 0);
 
-	DBG_ERROR("sxg: %s rel_region(0) start[%x] len[%x]\n", __FUNCTION__,
+	DBG_ERROR("sxg: %s rel_region(0) start[%x] len[%x]\n", __func__,
 		  mmio_start, mmio_len);
 	release_mem_region(mmio_start, mmio_len);
 
-	DBG_ERROR("sxg: %s iounmap dev->base_addr[%x]\n", __FUNCTION__,
+	DBG_ERROR("sxg: %s iounmap dev->base_addr[%x]\n", __func__,
 		  (unsigned int)dev->base_addr);
 	iounmap((char *)dev->base_addr);
 
-	DBG_ERROR("sxg: %s deallocate device\n", __FUNCTION__);
+	DBG_ERROR("sxg: %s deallocate device\n", __func__);
 	kfree(dev);
-	DBG_ERROR("sxg: %s EXIT\n", __FUNCTION__);
+	DBG_ERROR("sxg: %s EXIT\n", __func__);
 }
 
 static int sxg_entry_halt(p_net_device dev)
@@ -1807,17 +1808,17 @@
 	p_adapter_t adapter = (p_adapter_t) netdev_priv(dev);
 
 	spin_lock_irqsave(&sxg_global.driver_lock, sxg_global.flags);
-	DBG_ERROR("sxg: %s (%s) ENTER\n", __FUNCTION__, dev->name);
+	DBG_ERROR("sxg: %s (%s) ENTER\n", __func__, dev->name);
 
 	netif_stop_queue(adapter->netdev);
 	adapter->state = ADAPT_DOWN;
 	adapter->linkstate = LINK_DOWN;
 	adapter->devflags_prev = 0;
 	DBG_ERROR("sxg: %s (%s) set adapter[%p] state to ADAPT_DOWN(%d)\n",
-		  __FUNCTION__, dev->name, adapter, adapter->state);
+		  __func__, dev->name, adapter, adapter->state);
 
-	DBG_ERROR("sxg: %s (%s) EXIT\n", __FUNCTION__, dev->name);
-	DBG_ERROR("sxg: %s EXIT\n", __FUNCTION__);
+	DBG_ERROR("sxg: %s (%s) EXIT\n", __func__, dev->name);
+	DBG_ERROR("sxg: %s EXIT\n", __func__);
 	spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags);
 	return (STATUS_SUCCESS);
 }
@@ -1825,11 +1826,11 @@
 static int sxg_ioctl(p_net_device dev, struct ifreq *rq, int cmd)
 {
 	ASSERT(rq);
-//      DBG_ERROR("sxg: %s cmd[%x] rq[%p] dev[%p]\n", __FUNCTION__, cmd, rq, dev);
+/*      DBG_ERROR("sxg: %s cmd[%x] rq[%p] dev[%p]\n", __func__, cmd, rq, dev); */
 	switch (cmd) {
 	case SIOCSLICSETINTAGG:
 		{
-//                      p_adapter_t adapter = (p_adapter_t) netdev_priv(dev);
+/*                      p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); */
 			u32 data[7];
 			u32 intagg;
 
@@ -1841,12 +1842,12 @@
 			intagg = data[0];
 			printk(KERN_EMERG
 			       "%s: set interrupt aggregation to %d\n",
-			       __FUNCTION__, intagg);
+			       __func__, intagg);
 			return 0;
 		}
 
 	default:
-//              DBG_ERROR("sxg: %s UNSUPPORTED[%x]\n", __FUNCTION__, cmd);
+/*              DBG_ERROR("sxg: %s UNSUPPORTED[%x]\n", __func__, cmd); */
 		return -EOPNOTSUPP;
 	}
 	return 0;
@@ -1870,15 +1871,15 @@
 	p_adapter_t adapter = (p_adapter_t) netdev_priv(dev);
 	u32 status = STATUS_SUCCESS;
 
-	DBG_ERROR("sxg: %s ENTER sxg_send_packets skb[%p]\n", __FUNCTION__,
+	DBG_ERROR("sxg: %s ENTER sxg_send_packets skb[%p]\n", __func__,
 		  skb);
-	// Check the adapter state
+	/* Check the adapter state */
 	switch (adapter->State) {
 	case SXG_STATE_INITIALIZING:
 	case SXG_STATE_HALTED:
 	case SXG_STATE_SHUTDOWN:
-		ASSERT(0);	// unexpected
-		// fall through
+		ASSERT(0);	/* unexpected */
+		/* fall through */
 	case SXG_STATE_RESETTING:
 	case SXG_STATE_SLEEP:
 	case SXG_STATE_BOOTDIAG:
@@ -1898,23 +1899,23 @@
 	if (status != STATUS_SUCCESS) {
 		goto xmit_fail;
 	}
-	// send a packet
+	/* send a packet */
 	status = sxg_transmit_packet(adapter, skb);
 	if (status == STATUS_SUCCESS) {
 		goto xmit_done;
 	}
 
       xmit_fail:
-	// reject & complete all the packets if they cant be sent
+	/* reject & complete all the packets if they cant be sent */
 	if (status != STATUS_SUCCESS) {
 #if XXXTODO
-//      sxg_send_packets_fail(adapter, skb, status);
+/*      sxg_send_packets_fail(adapter, skb, status); */
 #else
 		SXG_DROP_DUMB_SEND(adapter, skb);
 		adapter->stats.tx_dropped++;
 #endif
 	}
-	DBG_ERROR("sxg: %s EXIT sxg_send_packets status[%x]\n", __FUNCTION__,
+	DBG_ERROR("sxg: %s EXIT sxg_send_packets status[%x]\n", __func__,
 		  status);
 
       xmit_done:
@@ -1940,12 +1941,12 @@
 	void *SglBuffer;
 	u32 SglBufferLength;
 
-	// The vast majority of work is done in the shared
-	// sxg_dumb_sgl routine.
+	/* The vast majority of work is done in the shared */
+	/* sxg_dumb_sgl routine. */
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSend",
 		  adapter, skb, 0, 0);
 
-	// Allocate a SGL buffer
+	/* Allocate a SGL buffer */
 	SXG_GET_SGL_BUFFER(adapter, SxgSgl);
 	if (!SxgSgl) {
 		adapter->Stats.NoSglBuf++;
@@ -1963,9 +1964,9 @@
 	SxgSgl->DumbPacket = skb;
 	pSgl = NULL;
 
-	// Call the common sxg_dumb_sgl routine to complete the send.
+	/* Call the common sxg_dumb_sgl routine to complete the send. */
 	sxg_dumb_sgl(pSgl, SxgSgl);
-	// Return success   sxg_dumb_sgl (or something later) will complete it.
+	/* Return success   sxg_dumb_sgl (or something later) will complete it. */
 	return (STATUS_SUCCESS);
 }
 
@@ -1983,39 +1984,39 @@
 {
 	p_adapter_t adapter = SxgSgl->adapter;
 	struct sk_buff *skb = SxgSgl->DumbPacket;
-	// For now, all dumb-nic sends go on RSS queue zero
+	/* For now, all dumb-nic sends go on RSS queue zero */
 	PSXG_XMT_RING XmtRing = &adapter->XmtRings[0];
 	PSXG_RING_INFO XmtRingInfo = &adapter->XmtRingZeroInfo;
 	PSXG_CMD XmtCmd = NULL;
-//      u32                         Index = 0;
+/*      u32                         Index = 0; */
 	u32 DataLength = skb->len;
-//  unsigned int                                BufLen;
-//      u32                         SglOffset;
+/*  unsigned int                                BufLen; */
+/*      u32                         SglOffset; */
 	u64 phys_addr;
 
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSgl",
 		  pSgl, SxgSgl, 0, 0);
 
-	// Set aside a pointer to the sgl
+	/* Set aside a pointer to the sgl */
 	SxgSgl->pSgl = pSgl;
 
-	// Sanity check that our SGL format is as we expect.
+	/* Sanity check that our SGL format is as we expect. */
 	ASSERT(sizeof(SXG_X64_SGE) == sizeof(SCATTER_GATHER_ELEMENT));
-	// Shouldn't be a vlan tag on this frame
+	/* Shouldn't be a vlan tag on this frame */
 	ASSERT(SxgSgl->VlanTag.VlanTci == 0);
 	ASSERT(SxgSgl->VlanTag.VlanTpid == 0);
 
-	// From here below we work with the SGL placed in our
-	// buffer.
+	/* From here below we work with the SGL placed in our */
+	/* buffer. */
 
 	SxgSgl->Sgl.NumberOfElements = 1;
 
-	// Grab the spinlock and acquire a command
+	/* Grab the spinlock and acquire a command */
 	spin_lock(&adapter->XmtZeroLock);
 	SXG_GET_CMD(XmtRing, XmtRingInfo, XmtCmd, SxgSgl);
 	if (XmtCmd == NULL) {
-		// Call sxg_complete_slow_send to see if we can
-		// free up any XmtRingZero entries and then try again
+		/* Call sxg_complete_slow_send to see if we can */
+		/* free up any XmtRingZero entries and then try again */
 		spin_unlock(&adapter->XmtZeroLock);
 		sxg_complete_slow_send(adapter);
 		spin_lock(&adapter->XmtZeroLock);
@@ -2027,10 +2028,10 @@
 	}
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbCmd",
 		  XmtCmd, XmtRingInfo->Head, XmtRingInfo->Tail, 0);
-	// Update stats
+	/* Update stats */
 	adapter->Stats.DumbXmtPkts++;
 	adapter->Stats.DumbXmtBytes += DataLength;
-#if XXXTODO			// Stats stuff
+#if XXXTODO			/* Stats stuff */
 	if (SXG_MULTICAST_PACKET(EtherHdr)) {
 		if (SXG_BROADCAST_PACKET(EtherHdr)) {
 			adapter->Stats.DumbXmtBcastPkts++;
@@ -2044,8 +2045,8 @@
 		adapter->Stats.DumbXmtUcastBytes += DataLength;
 	}
 #endif
-	// Fill in the command
-	// Copy out the first SGE to the command and adjust for offset
+	/* Fill in the command */
+	/* Copy out the first SGE to the command and adjust for offset */
 	phys_addr =
 	    pci_map_single(adapter->pcidev, skb->data, skb->len,
 			   PCI_DMA_TODEVICE);
@@ -2053,54 +2054,54 @@
 	XmtCmd->Buffer.FirstSgeAddress = XmtCmd->Buffer.FirstSgeAddress << 32;
 	XmtCmd->Buffer.FirstSgeAddress =
 	    XmtCmd->Buffer.FirstSgeAddress | SXG_GET_ADDR_LOW(phys_addr);
-//      XmtCmd->Buffer.FirstSgeAddress = SxgSgl->Sgl.Elements[Index].Address;
-//      XmtCmd->Buffer.FirstSgeAddress.LowPart += MdlOffset;
+/*      XmtCmd->Buffer.FirstSgeAddress = SxgSgl->Sgl.Elements[Index].Address; */
+/*      XmtCmd->Buffer.FirstSgeAddress.LowPart += MdlOffset; */
 	XmtCmd->Buffer.FirstSgeLength = DataLength;
-	// Set a pointer to the remaining SGL entries
-//      XmtCmd->Sgl = SxgSgl->PhysicalAddress;
-	// Advance the physical address of the SxgSgl structure to
-	// the second SGE
-//      SglOffset = (u32)((u32 *)(&SxgSgl->Sgl.Elements[Index+1]) -
-//                                              (u32 *)SxgSgl);
-//      XmtCmd->Sgl.LowPart += SglOffset;
+	/* Set a pointer to the remaining SGL entries */
+/*      XmtCmd->Sgl = SxgSgl->PhysicalAddress; */
+	/* Advance the physical address of the SxgSgl structure to */
+	/* the second SGE */
+/*      SglOffset = (u32)((u32 *)(&SxgSgl->Sgl.Elements[Index+1]) - */
+/*                                              (u32 *)SxgSgl); */
+/*      XmtCmd->Sgl.LowPart += SglOffset; */
 	XmtCmd->Buffer.SgeOffset = 0;
-	// Note - TotalLength might be overwritten with MSS below..
+	/* Note - TotalLength might be overwritten with MSS below.. */
 	XmtCmd->Buffer.TotalLength = DataLength;
-	XmtCmd->SgEntries = 1;	//(ushort)(SxgSgl->Sgl.NumberOfElements - Index);
+	XmtCmd->SgEntries = 1;	/*(ushort)(SxgSgl->Sgl.NumberOfElements - Index); */
 	XmtCmd->Flags = 0;
-	//
-	// Advance transmit cmd descripter by 1.
-	// NOTE - See comments in SxgTcpOutput where we write
-	// to the XmtCmd register regarding CPU ID values and/or
-	// multiple commands.
-	//
-	//
+	/* */
+	/* Advance transmit cmd descripter by 1. */
+	/* NOTE - See comments in SxgTcpOutput where we write */
+	/* to the XmtCmd register regarding CPU ID values and/or */
+	/* multiple commands. */
+	/* */
+	/* */
 	WRITE_REG(adapter->UcodeRegs[0].XmtCmd, 1, TRUE);
-	//
-	//
-	adapter->Stats.XmtQLen++;	// Stats within lock
+	/* */
+	/* */
+	adapter->Stats.XmtQLen++;	/* Stats within lock */
 	spin_unlock(&adapter->XmtZeroLock);
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDumSgl2",
 		  XmtCmd, pSgl, SxgSgl, 0);
 	return;
 
       abortcmd:
-	// NOTE - Only jump to this label AFTER grabbing the
-	// XmtZeroLock, and DO NOT DROP IT between the
-	// command allocation and the following abort.
+	/* NOTE - Only jump to this label AFTER grabbing the */
+	/* XmtZeroLock, and DO NOT DROP IT between the */
+	/* command allocation and the following abort. */
 	if (XmtCmd) {
 		SXG_ABORT_CMD(XmtRingInfo);
 	}
 	spin_unlock(&adapter->XmtZeroLock);
 
-// failsgl:
-	// Jump to this label if failure occurs before the
-	// XmtZeroLock is grabbed
+/* failsgl: */
+	/* Jump to this label if failure occurs before the */
+	/* XmtZeroLock is grabbed */
 	adapter->Stats.XmtErrors++;
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "DumSGFal",
 		  pSgl, SxgSgl, XmtRingInfo->Head, XmtRingInfo->Tail);
 
-	SXG_COMPLETE_DUMB_SEND(adapter, SxgSgl->DumbPacket);	// SxgSgl->DumbPacket is the skb
+	SXG_COMPLETE_DUMB_SEND(adapter, SxgSgl->DumbPacket);	/* SxgSgl->DumbPacket is the skb */
 }
 
 /***************************************************************
@@ -2127,122 +2128,122 @@
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "InitLink",
 		  adapter, 0, 0, 0);
 
-	// Reset PHY and XGXS module
+	/* Reset PHY and XGXS module */
 	WRITE_REG(HwRegs->LinkStatus, LS_SERDES_POWER_DOWN, TRUE);
 
-	// Reset transmit configuration register
+	/* Reset transmit configuration register */
 	WRITE_REG(HwRegs->XmtConfig, XMT_CONFIG_RESET, TRUE);
 
-	// Reset receive configuration register
+	/* Reset receive configuration register */
 	WRITE_REG(HwRegs->RcvConfig, RCV_CONFIG_RESET, TRUE);
 
-	// Reset all MAC modules
+	/* Reset all MAC modules */
 	WRITE_REG(HwRegs->MacConfig0, AXGMAC_CFG0_SUB_RESET, TRUE);
 
-	// Link address 0
-	// XXXTODO - This assumes the MAC address (0a:0b:0c:0d:0e:0f)
-	// is stored with the first nibble (0a) in the byte 0
-	// of the Mac address.  Possibly reverse?
+	/* Link address 0 */
+	/* XXXTODO - This assumes the MAC address (0a:0b:0c:0d:0e:0f) */
+	/* is stored with the first nibble (0a) in the byte 0 */
+	/* of the Mac address.  Possibly reverse? */
 	Value = *(u32 *) adapter->MacAddr;
 	WRITE_REG(HwRegs->LinkAddress0Low, Value, TRUE);
-	// also write the MAC address to the MAC.  Endian is reversed.
+	/* also write the MAC address to the MAC.  Endian is reversed. */
 	WRITE_REG(HwRegs->MacAddressLow, ntohl(Value), TRUE);
 	Value = (*(u16 *) & adapter->MacAddr[4] & 0x0000FFFF);
 	WRITE_REG(HwRegs->LinkAddress0High, Value | LINK_ADDRESS_ENABLE, TRUE);
-	// endian swap for the MAC (put high bytes in bits [31:16], swapped)
+	/* endian swap for the MAC (put high bytes in bits [31:16], swapped) */
 	Value = ntohl(Value);
 	WRITE_REG(HwRegs->MacAddressHigh, Value, TRUE);
-	// Link address 1
+	/* Link address 1 */
 	WRITE_REG(HwRegs->LinkAddress1Low, 0, TRUE);
 	WRITE_REG(HwRegs->LinkAddress1High, 0, TRUE);
-	// Link address 2
+	/* Link address 2 */
 	WRITE_REG(HwRegs->LinkAddress2Low, 0, TRUE);
 	WRITE_REG(HwRegs->LinkAddress2High, 0, TRUE);
-	// Link address 3
+	/* Link address 3 */
 	WRITE_REG(HwRegs->LinkAddress3Low, 0, TRUE);
 	WRITE_REG(HwRegs->LinkAddress3High, 0, TRUE);
 
-	// Enable MAC modules
+	/* Enable MAC modules */
 	WRITE_REG(HwRegs->MacConfig0, 0, TRUE);
 
-	// Configure MAC
-	WRITE_REG(HwRegs->MacConfig1, (AXGMAC_CFG1_XMT_PAUSE |	// Allow sending of pause
-				       AXGMAC_CFG1_XMT_EN |	// Enable XMT
-				       AXGMAC_CFG1_RCV_PAUSE |	// Enable detection of pause
-				       AXGMAC_CFG1_RCV_EN |	// Enable receive
-				       AXGMAC_CFG1_SHORT_ASSERT |	// short frame detection
-				       AXGMAC_CFG1_CHECK_LEN |	// Verify frame length
-				       AXGMAC_CFG1_GEN_FCS |	// Generate FCS
-				       AXGMAC_CFG1_PAD_64),	// Pad frames to 64 bytes
+	/* Configure MAC */
+	WRITE_REG(HwRegs->MacConfig1, (AXGMAC_CFG1_XMT_PAUSE |	/* Allow sending of pause */
+				       AXGMAC_CFG1_XMT_EN |	/* Enable XMT */
+				       AXGMAC_CFG1_RCV_PAUSE |	/* Enable detection of pause */
+				       AXGMAC_CFG1_RCV_EN |	/* Enable receive */
+				       AXGMAC_CFG1_SHORT_ASSERT |	/* short frame detection */
+				       AXGMAC_CFG1_CHECK_LEN |	/* Verify frame length */
+				       AXGMAC_CFG1_GEN_FCS |	/* Generate FCS */
+				       AXGMAC_CFG1_PAD_64),	/* Pad frames to 64 bytes */
 		  TRUE);
 
-	// Set AXGMAC max frame length if jumbo.  Not needed for standard MTU
+	/* Set AXGMAC max frame length if jumbo.  Not needed for standard MTU */
 	if (adapter->JumboEnabled) {
 		WRITE_REG(HwRegs->MacMaxFrameLen, AXGMAC_MAXFRAME_JUMBO, TRUE);
 	}
-	// AMIIM Configuration Register -
-	// The value placed in the AXGMAC_AMIIM_CFG_HALF_CLOCK portion
-	// (bottom bits) of this register is used to determine the
-	// MDC frequency as specified in the A-XGMAC Design Document.
-	// This value must not be zero.  The following value (62 or 0x3E)
-	// is based on our MAC transmit clock frequency (MTCLK) of 312.5 MHz.
-	// Given a maximum MDIO clock frequency of 2.5 MHz (see the PHY spec),
-	// we get:  312.5/(2*(X+1)) < 2.5  ==> X = 62.
-	// This value happens to be the default value for this register,
-	// so we really don't have to do this.
+	/* AMIIM Configuration Register - */
+	/* The value placed in the AXGMAC_AMIIM_CFG_HALF_CLOCK portion */
+	/* (bottom bits) of this register is used to determine the */
+	/* MDC frequency as specified in the A-XGMAC Design Document. */
+	/* This value must not be zero.  The following value (62 or 0x3E) */
+	/* is based on our MAC transmit clock frequency (MTCLK) of 312.5 MHz. */
+	/* Given a maximum MDIO clock frequency of 2.5 MHz (see the PHY spec), */
+	/* we get:  312.5/(2*(X+1)) < 2.5  ==> X = 62. */
+	/* This value happens to be the default value for this register, */
+	/* so we really don't have to do this. */
 	WRITE_REG(HwRegs->MacAmiimConfig, 0x0000003E, TRUE);
 
-	// Power up and enable PHY and XAUI/XGXS/Serdes logic
+	/* Power up and enable PHY and XAUI/XGXS/Serdes logic */
 	WRITE_REG(HwRegs->LinkStatus,
 		  (LS_PHY_CLR_RESET |
 		   LS_XGXS_ENABLE |
 		   LS_XGXS_CTL | LS_PHY_CLK_EN | LS_ATTN_ALARM), TRUE);
 	DBG_ERROR("After Power Up and enable PHY in sxg_initialize_link\n");
 
-	// Per information given by Aeluros, wait 100 ms after removing reset.
-	// It's not enough to wait for the self-clearing reset bit in reg 0 to clear.
+	/* Per information given by Aeluros, wait 100 ms after removing reset. */
+	/* It's not enough to wait for the self-clearing reset bit in reg 0 to clear. */
 	mdelay(100);
 
-	// Verify the PHY has come up by checking that the Reset bit has cleared.
-	status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA,	// PHY PMA/PMD module
-				   PHY_PMA_CONTROL1,	// PMA/PMD control register
+	/* Verify the PHY has come up by checking that the Reset bit has cleared. */
+	status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA,	/* PHY PMA/PMD module */
+				   PHY_PMA_CONTROL1,	/* PMA/PMD control register */
 				   &Value);
 	if (status != STATUS_SUCCESS)
 		return (STATUS_FAILURE);
-	if (Value & PMA_CONTROL1_RESET)	// reset complete if bit is 0
+	if (Value & PMA_CONTROL1_RESET)	/* reset complete if bit is 0 */
 		return (STATUS_FAILURE);
 
-	// The SERDES should be initialized by now - confirm
+	/* The SERDES should be initialized by now - confirm */
 	READ_REG(HwRegs->LinkStatus, Value);
-	if (Value & LS_SERDES_DOWN)	// verify SERDES is initialized
+	if (Value & LS_SERDES_DOWN)	/* verify SERDES is initialized */
 		return (STATUS_FAILURE);
 
-	// The XAUI link should also be up - confirm
-	if (!(Value & LS_XAUI_LINK_UP))	// verify XAUI link is up
+	/* The XAUI link should also be up - confirm */
+	if (!(Value & LS_XAUI_LINK_UP))	/* verify XAUI link is up */
 		return (STATUS_FAILURE);
 
-	// Initialize the PHY
+	/* Initialize the PHY */
 	status = sxg_phy_init(adapter);
 	if (status != STATUS_SUCCESS)
 		return (STATUS_FAILURE);
 
-	// Enable the Link Alarm
-	status = sxg_write_mdio_reg(adapter, MIIM_DEV_PHY_PMA,	// PHY PMA/PMD module
-				    LASI_CONTROL,	// LASI control register
-				    LASI_CTL_LS_ALARM_ENABLE);	// enable link alarm bit
+	/* Enable the Link Alarm */
+	status = sxg_write_mdio_reg(adapter, MIIM_DEV_PHY_PMA,	/* PHY PMA/PMD module */
+				    LASI_CONTROL,	/* LASI control register */
+				    LASI_CTL_LS_ALARM_ENABLE);	/* enable link alarm bit */
 	if (status != STATUS_SUCCESS)
 		return (STATUS_FAILURE);
 
-	// XXXTODO - temporary - verify bit is set
-	status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA,	// PHY PMA/PMD module
-				   LASI_CONTROL,	// LASI control register
+	/* XXXTODO - temporary - verify bit is set */
+	status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA,	/* PHY PMA/PMD module */
+				   LASI_CONTROL,	/* LASI control register */
 				   &Value);
 	if (status != STATUS_SUCCESS)
 		return (STATUS_FAILURE);
 	if (!(Value & LASI_CTL_LS_ALARM_ENABLE)) {
 		DBG_ERROR("Error!  LASI Control Alarm Enable bit not set!\n");
 	}
-	// Enable receive
+	/* Enable receive */
 	MaxFrame = adapter->JumboEnabled ? JUMBOMAXFRAME : ETHERMAXFRAME;
 	ConfigData = (RCV_CONFIG_ENABLE |
 		      RCV_CONFIG_ENPARSE |
@@ -2256,7 +2257,7 @@
 
 	WRITE_REG(HwRegs->XmtConfig, XMT_CONFIG_ENABLE, TRUE);
 
-	// Mark the link as down.  We'll get a link event when it comes up.
+	/* Mark the link as down.  We'll get a link event when it comes up. */
 	sxg_link_state(adapter, SXG_LINK_DOWN);
 
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XInitLnk",
@@ -2279,35 +2280,35 @@
 	PPHY_UCODE p;
 	int status;
 
-	DBG_ERROR("ENTER %s\n", __FUNCTION__);
+	DBG_ERROR("ENTER %s\n", __func__);
 
-	// Read a register to identify the PHY type
-	status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA,	// PHY PMA/PMD module
-				   0xC205,	// PHY ID register (?)
-				   &Value);	//    XXXTODO - add def
+	/* Read a register to identify the PHY type */
+	status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA,	/* PHY PMA/PMD module */
+				   0xC205,	/* PHY ID register (?) */
+				   &Value);	/*    XXXTODO - add def */
 	if (status != STATUS_SUCCESS)
 		return (STATUS_FAILURE);
 
-	if (Value == 0x0012) {	// 0x0012 == AEL2005C PHY(?) - XXXTODO - add def
+	if (Value == 0x0012) {	/* 0x0012 == AEL2005C PHY(?) - XXXTODO - add def */
 		DBG_ERROR
 		    ("AEL2005C PHY detected.  Downloading PHY microcode.\n");
 
-		// Initialize AEL2005C PHY and download PHY microcode
+		/* Initialize AEL2005C PHY and download PHY microcode */
 		for (p = PhyUcode; p->Addr != 0xFFFF; p++) {
 			if (p->Addr == 0) {
-				// if address == 0, data == sleep time in ms
+				/* if address == 0, data == sleep time in ms */
 				mdelay(p->Data);
 			} else {
-				// write the given data to the specified address
-				status = sxg_write_mdio_reg(adapter, MIIM_DEV_PHY_PMA,	// PHY PMA/PMD module
-							    p->Addr,	// PHY address
-							    p->Data);	// PHY data
+				/* write the given data to the specified address */
+				status = sxg_write_mdio_reg(adapter, MIIM_DEV_PHY_PMA,	/* PHY PMA/PMD module */
+							    p->Addr,	/* PHY address */
+							    p->Data);	/* PHY data */
 				if (status != STATUS_SUCCESS)
 					return (STATUS_FAILURE);
 			}
 		}
 	}
-	DBG_ERROR("EXIT %s\n", __FUNCTION__);
+	DBG_ERROR("EXIT %s\n", __func__);
 
 	return (STATUS_SUCCESS);
 }
@@ -2330,42 +2331,42 @@
 
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "LinkEvnt",
 		  adapter, 0, 0, 0);
-	DBG_ERROR("ENTER %s\n", __FUNCTION__);
+	DBG_ERROR("ENTER %s\n", __func__);
 
-	// Check the Link Status register.  We should have a Link Alarm.
+	/* Check the Link Status register.  We should have a Link Alarm. */
 	READ_REG(HwRegs->LinkStatus, Value);
 	if (Value & LS_LINK_ALARM) {
-		// We got a Link Status alarm.  First, pause to let the
-		// link state settle (it can bounce a number of times)
+		/* We got a Link Status alarm.  First, pause to let the */
+		/* link state settle (it can bounce a number of times) */
 		mdelay(10);
 
-		// Now clear the alarm by reading the LASI status register.
-		status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA,	// PHY PMA/PMD module
-					   LASI_STATUS,	// LASI status register
+		/* Now clear the alarm by reading the LASI status register. */
+		status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA,	/* PHY PMA/PMD module */
+					   LASI_STATUS,	/* LASI status register */
 					   &Value);
 		if (status != STATUS_SUCCESS) {
 			DBG_ERROR("Error reading LASI Status MDIO register!\n");
 			sxg_link_state(adapter, SXG_LINK_DOWN);
-//                      ASSERT(0);
+/*                      ASSERT(0); */
 		}
 		ASSERT(Value & LASI_STATUS_LS_ALARM);
 
-		// Now get and set the link state
+		/* Now get and set the link state */
 		LinkState = sxg_get_link_state(adapter);
 		sxg_link_state(adapter, LinkState);
 		DBG_ERROR("SXG: Link Alarm occurred.  Link is %s\n",
 			  ((LinkState == SXG_LINK_UP) ? "UP" : "DOWN"));
 	} else {
-		// XXXTODO - Assuming Link Attention is only being generated for the
-		// Link Alarm pin (and not for a XAUI Link Status change), then it's
-		// impossible to get here.  Yet we've gotten here twice (under extreme
-		// conditions - bouncing the link up and down many times a second).
-		// Needs further investigation.
+		/* XXXTODO - Assuming Link Attention is only being generated for the */
+		/* Link Alarm pin (and not for a XAUI Link Status change), then it's */
+		/* impossible to get here.  Yet we've gotten here twice (under extreme */
+		/* conditions - bouncing the link up and down many times a second). */
+		/* Needs further investigation. */
 		DBG_ERROR("SXG: sxg_link_event: Can't get here!\n");
 		DBG_ERROR("SXG: Link Status == 0x%08X.\n", Value);
-//              ASSERT(0);
+/*              ASSERT(0); */
 	}
-	DBG_ERROR("EXIT %s\n", __FUNCTION__);
+	DBG_ERROR("EXIT %s\n", __func__);
 
 }
 
@@ -2383,50 +2384,50 @@
 	int status;
 	u32 Value;
 
-	DBG_ERROR("ENTER %s\n", __FUNCTION__);
+	DBG_ERROR("ENTER %s\n", __func__);
 
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "GetLink",
 		  adapter, 0, 0, 0);
 
-	// Per the Xenpak spec (and the IEEE 10Gb spec?), the link is up if
-	// the following 3 bits (from 3 different MDIO registers) are all true.
-	status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA,	// PHY PMA/PMD module
-				   PHY_PMA_RCV_DET,	// PMA/PMD Receive Signal Detect register
+	/* Per the Xenpak spec (and the IEEE 10Gb spec?), the link is up if */
+	/* the following 3 bits (from 3 different MDIO registers) are all true. */
+	status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA,	/* PHY PMA/PMD module */
+				   PHY_PMA_RCV_DET,	/* PMA/PMD Receive Signal Detect register */
 				   &Value);
 	if (status != STATUS_SUCCESS)
 		goto bad;
 
-	// If PMA/PMD receive signal detect is 0, then the link is down
+	/* If PMA/PMD receive signal detect is 0, then the link is down */
 	if (!(Value & PMA_RCV_DETECT))
 		return (SXG_LINK_DOWN);
 
-	status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PCS,	// PHY PCS module
-				   PHY_PCS_10G_STATUS1,	// PCS 10GBASE-R Status 1 register
+	status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PCS,	/* PHY PCS module */
+				   PHY_PCS_10G_STATUS1,	/* PCS 10GBASE-R Status 1 register */
 				   &Value);
 	if (status != STATUS_SUCCESS)
 		goto bad;
 
-	// If PCS is not locked to receive blocks, then the link is down
+	/* If PCS is not locked to receive blocks, then the link is down */
 	if (!(Value & PCS_10B_BLOCK_LOCK))
 		return (SXG_LINK_DOWN);
 
-	status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_XS,	// PHY XS module
-				   PHY_XS_LANE_STATUS,	// XS Lane Status register
+	status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_XS,	/* PHY XS module */
+				   PHY_XS_LANE_STATUS,	/* XS Lane Status register */
 				   &Value);
 	if (status != STATUS_SUCCESS)
 		goto bad;
 
-	// If XS transmit lanes are not aligned, then the link is down
+	/* If XS transmit lanes are not aligned, then the link is down */
 	if (!(Value & XS_LANE_ALIGN))
 		return (SXG_LINK_DOWN);
 
-	// All 3 bits are true, so the link is up
-	DBG_ERROR("EXIT %s\n", __FUNCTION__);
+	/* All 3 bits are true, so the link is up */
+	DBG_ERROR("EXIT %s\n", __func__);
 
 	return (SXG_LINK_UP);
 
       bad:
-	// An error occurred reading an MDIO register.  This shouldn't happen.
+	/* An error occurred reading an MDIO register.  This shouldn't happen. */
 	DBG_ERROR("Error reading an MDIO register!\n");
 	ASSERT(0);
 	return (SXG_LINK_DOWN);
@@ -2437,11 +2438,11 @@
 {
 	if (adapter->LinkState == SXG_LINK_UP) {
 		DBG_ERROR("%s: LINK now UP, call netif_start_queue\n",
-			  __FUNCTION__);
+			  __func__);
 		netif_start_queue(adapter->netdev);
 	} else {
 		DBG_ERROR("%s: LINK now DOWN, call netif_stop_queue\n",
-			  __FUNCTION__);
+			  __func__);
 		netif_stop_queue(adapter->netdev);
 	}
 }
@@ -2464,23 +2465,23 @@
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "LnkINDCT",
 		  adapter, LinkState, adapter->LinkState, adapter->State);
 
-	DBG_ERROR("ENTER %s\n", __FUNCTION__);
+	DBG_ERROR("ENTER %s\n", __func__);
 
-	// Hold the adapter lock during this routine.  Maybe move
-	// the lock to the caller.
+	/* Hold the adapter lock during this routine.  Maybe move */
+	/* the lock to the caller. */
 	spin_lock(&adapter->AdapterLock);
 	if (LinkState == adapter->LinkState) {
-		// Nothing changed..
+		/* Nothing changed.. */
 		spin_unlock(&adapter->AdapterLock);
-		DBG_ERROR("EXIT #0 %s\n", __FUNCTION__);
+		DBG_ERROR("EXIT #0 %s\n", __func__);
 		return;
 	}
-	// Save the adapter state
+	/* Save the adapter state */
 	adapter->LinkState = LinkState;
 
-	// Drop the lock and indicate link state
+	/* Drop the lock and indicate link state */
 	spin_unlock(&adapter->AdapterLock);
-	DBG_ERROR("EXIT #1 %s\n", __FUNCTION__);
+	DBG_ERROR("EXIT #1 %s\n", __func__);
 
 	sxg_indicate_link_state(adapter, LinkState);
 }
@@ -2501,76 +2502,76 @@
 			      u32 DevAddr, u32 RegAddr, u32 Value)
 {
 	PSXG_HW_REGS HwRegs = adapter->HwRegs;
-	u32 AddrOp;		// Address operation (written to MIIM field reg)
-	u32 WriteOp;		// Write operation (written to MIIM field reg)
-	u32 Cmd;		// Command (written to MIIM command reg)
+	u32 AddrOp;		/* Address operation (written to MIIM field reg) */
+	u32 WriteOp;		/* Write operation (written to MIIM field reg) */
+	u32 Cmd;		/* Command (written to MIIM command reg) */
 	u32 ValueRead;
 	u32 Timeout;
 
-//  DBG_ERROR("ENTER %s\n", __FUNCTION__);
+/*  DBG_ERROR("ENTER %s\n", __func__); */
 
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "WrtMDIO",
 		  adapter, 0, 0, 0);
 
-	// Ensure values don't exceed field width
-	DevAddr &= 0x001F;	// 5-bit field
-	RegAddr &= 0xFFFF;	// 16-bit field
-	Value &= 0xFFFF;	// 16-bit field
+	/* Ensure values don't exceed field width */
+	DevAddr &= 0x001F;	/* 5-bit field */
+	RegAddr &= 0xFFFF;	/* 16-bit field */
+	Value &= 0xFFFF;	/* 16-bit field */
 
-	// Set MIIM field register bits for an MIIM address operation
+	/* Set MIIM field register bits for an MIIM address operation */
 	AddrOp = (MIIM_PORT_NUM << AXGMAC_AMIIM_FIELD_PORT_SHIFT) |
 	    (DevAddr << AXGMAC_AMIIM_FIELD_DEV_SHIFT) |
 	    (MIIM_TA_10GB << AXGMAC_AMIIM_FIELD_TA_SHIFT) |
 	    (MIIM_OP_ADDR << AXGMAC_AMIIM_FIELD_OP_SHIFT) | RegAddr;
 
-	// Set MIIM field register bits for an MIIM write operation
+	/* Set MIIM field register bits for an MIIM write operation */
 	WriteOp = (MIIM_PORT_NUM << AXGMAC_AMIIM_FIELD_PORT_SHIFT) |
 	    (DevAddr << AXGMAC_AMIIM_FIELD_DEV_SHIFT) |
 	    (MIIM_TA_10GB << AXGMAC_AMIIM_FIELD_TA_SHIFT) |
 	    (MIIM_OP_WRITE << AXGMAC_AMIIM_FIELD_OP_SHIFT) | Value;
 
-	// Set MIIM command register bits to execute an MIIM command
+	/* Set MIIM command register bits to execute an MIIM command */
 	Cmd = AXGMAC_AMIIM_CMD_START | AXGMAC_AMIIM_CMD_10G_OPERATION;
 
-	// Reset the command register command bit (in case it's not 0)
+	/* Reset the command register command bit (in case it's not 0) */
 	WRITE_REG(HwRegs->MacAmiimCmd, 0, TRUE);
 
-	// MIIM write to set the address of the specified MDIO register
+	/* MIIM write to set the address of the specified MDIO register */
 	WRITE_REG(HwRegs->MacAmiimField, AddrOp, TRUE);
 
-	// Write to MIIM Command Register to execute to address operation
+	/* Write to MIIM Command Register to execute to address operation */
 	WRITE_REG(HwRegs->MacAmiimCmd, Cmd, TRUE);
 
-	// Poll AMIIM Indicator register to wait for completion
+	/* Poll AMIIM Indicator register to wait for completion */
 	Timeout = SXG_LINK_TIMEOUT;
 	do {
-		udelay(100);	// Timeout in 100us units
+		udelay(100);	/* Timeout in 100us units */
 		READ_REG(HwRegs->MacAmiimIndicator, ValueRead);
 		if (--Timeout == 0) {
 			return (STATUS_FAILURE);
 		}
 	} while (ValueRead & AXGMAC_AMIIM_INDC_BUSY);
 
-	// Reset the command register command bit
+	/* Reset the command register command bit */
 	WRITE_REG(HwRegs->MacAmiimCmd, 0, TRUE);
 
-	// MIIM write to set up an MDIO write operation
+	/* MIIM write to set up an MDIO write operation */
 	WRITE_REG(HwRegs->MacAmiimField, WriteOp, TRUE);
 
-	// Write to MIIM Command Register to execute the write operation
+	/* Write to MIIM Command Register to execute the write operation */
 	WRITE_REG(HwRegs->MacAmiimCmd, Cmd, TRUE);
 
-	// Poll AMIIM Indicator register to wait for completion
+	/* Poll AMIIM Indicator register to wait for completion */
 	Timeout = SXG_LINK_TIMEOUT;
 	do {
-		udelay(100);	// Timeout in 100us units
+		udelay(100);	/* Timeout in 100us units */
 		READ_REG(HwRegs->MacAmiimIndicator, ValueRead);
 		if (--Timeout == 0) {
 			return (STATUS_FAILURE);
 		}
 	} while (ValueRead & AXGMAC_AMIIM_INDC_BUSY);
 
-//  DBG_ERROR("EXIT %s\n", __FUNCTION__);
+/*  DBG_ERROR("EXIT %s\n", __func__); */
 
 	return (STATUS_SUCCESS);
 }
@@ -2591,83 +2592,186 @@
 			     u32 DevAddr, u32 RegAddr, u32 *pValue)
 {
 	PSXG_HW_REGS HwRegs = adapter->HwRegs;
-	u32 AddrOp;		// Address operation (written to MIIM field reg)
-	u32 ReadOp;		// Read operation (written to MIIM field reg)
-	u32 Cmd;		// Command (written to MIIM command reg)
+	u32 AddrOp;		/* Address operation (written to MIIM field reg) */
+	u32 ReadOp;		/* Read operation (written to MIIM field reg) */
+	u32 Cmd;		/* Command (written to MIIM command reg) */
 	u32 ValueRead;
 	u32 Timeout;
 
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "WrtMDIO",
 		  adapter, 0, 0, 0);
-//  DBG_ERROR("ENTER %s\n", __FUNCTION__);
+/*  DBG_ERROR("ENTER %s\n", __func__); */
 
-	// Ensure values don't exceed field width
-	DevAddr &= 0x001F;	// 5-bit field
-	RegAddr &= 0xFFFF;	// 16-bit field
+	/* Ensure values don't exceed field width */
+	DevAddr &= 0x001F;	/* 5-bit field */
+	RegAddr &= 0xFFFF;	/* 16-bit field */
 
-	// Set MIIM field register bits for an MIIM address operation
+	/* Set MIIM field register bits for an MIIM address operation */
 	AddrOp = (MIIM_PORT_NUM << AXGMAC_AMIIM_FIELD_PORT_SHIFT) |
 	    (DevAddr << AXGMAC_AMIIM_FIELD_DEV_SHIFT) |
 	    (MIIM_TA_10GB << AXGMAC_AMIIM_FIELD_TA_SHIFT) |
 	    (MIIM_OP_ADDR << AXGMAC_AMIIM_FIELD_OP_SHIFT) | RegAddr;
 
-	// Set MIIM field register bits for an MIIM read operation
+	/* Set MIIM field register bits for an MIIM read operation */
 	ReadOp = (MIIM_PORT_NUM << AXGMAC_AMIIM_FIELD_PORT_SHIFT) |
 	    (DevAddr << AXGMAC_AMIIM_FIELD_DEV_SHIFT) |
 	    (MIIM_TA_10GB << AXGMAC_AMIIM_FIELD_TA_SHIFT) |
 	    (MIIM_OP_READ << AXGMAC_AMIIM_FIELD_OP_SHIFT);
 
-	// Set MIIM command register bits to execute an MIIM command
+	/* Set MIIM command register bits to execute an MIIM command */
 	Cmd = AXGMAC_AMIIM_CMD_START | AXGMAC_AMIIM_CMD_10G_OPERATION;
 
-	// Reset the command register command bit (in case it's not 0)
+	/* Reset the command register command bit (in case it's not 0) */
 	WRITE_REG(HwRegs->MacAmiimCmd, 0, TRUE);
 
-	// MIIM write to set the address of the specified MDIO register
+	/* MIIM write to set the address of the specified MDIO register */
 	WRITE_REG(HwRegs->MacAmiimField, AddrOp, TRUE);
 
-	// Write to MIIM Command Register to execute to address operation
+	/* Write to MIIM Command Register to execute to address operation */
 	WRITE_REG(HwRegs->MacAmiimCmd, Cmd, TRUE);
 
-	// Poll AMIIM Indicator register to wait for completion
+	/* Poll AMIIM Indicator register to wait for completion */
 	Timeout = SXG_LINK_TIMEOUT;
 	do {
-		udelay(100);	// Timeout in 100us units
+		udelay(100);	/* Timeout in 100us units */
 		READ_REG(HwRegs->MacAmiimIndicator, ValueRead);
 		if (--Timeout == 0) {
 			return (STATUS_FAILURE);
 		}
 	} while (ValueRead & AXGMAC_AMIIM_INDC_BUSY);
 
-	// Reset the command register command bit
+	/* Reset the command register command bit */
 	WRITE_REG(HwRegs->MacAmiimCmd, 0, TRUE);
 
-	// MIIM write to set up an MDIO register read operation
+	/* MIIM write to set up an MDIO register read operation */
 	WRITE_REG(HwRegs->MacAmiimField, ReadOp, TRUE);
 
-	// Write to MIIM Command Register to execute the read operation
+	/* Write to MIIM Command Register to execute the read operation */
 	WRITE_REG(HwRegs->MacAmiimCmd, Cmd, TRUE);
 
-	// Poll AMIIM Indicator register to wait for completion
+	/* Poll AMIIM Indicator register to wait for completion */
 	Timeout = SXG_LINK_TIMEOUT;
 	do {
-		udelay(100);	// Timeout in 100us units
+		udelay(100);	/* Timeout in 100us units */
 		READ_REG(HwRegs->MacAmiimIndicator, ValueRead);
 		if (--Timeout == 0) {
 			return (STATUS_FAILURE);
 		}
 	} while (ValueRead & AXGMAC_AMIIM_INDC_BUSY);
 
-	// Read the MDIO register data back from the field register
+	/* Read the MDIO register data back from the field register */
 	READ_REG(HwRegs->MacAmiimField, *pValue);
-	*pValue &= 0xFFFF;	// data is in the lower 16 bits
+	*pValue &= 0xFFFF;	/* data is in the lower 16 bits */
 
-//  DBG_ERROR("EXIT %s\n", __FUNCTION__);
+/*  DBG_ERROR("EXIT %s\n", __func__); */
 
 	return (STATUS_SUCCESS);
 }
 
 /*
+ * Functions to obtain the CRC corresponding to the destination mac address.
+ * This is a standard ethernet CRC in that it is a 32-bit, reflected CRC using
+ * the polynomial:
+ *   x^32 + x^26 + x^23 + x^22 + x^16 + x^12 + x^11 + x^10 + x^8 + x^7 + x^5 + x^4 + x^2 + x^1.
+ *
+ * After the CRC for the 6 bytes is generated (but before the value is complemented),
+ * we must then transpose the value and return bits 30-23.
+ *
+ */
+static u32 sxg_crc_table[256];	/* Table of CRC's for all possible byte values */
+
+/*
+ *  Contruct the CRC32 table
+ */
+static void sxg_mcast_init_crc32(void)
+{
+	u32 c;			/*  CRC shit reg                 */
+	u32 e = 0;		/*  Poly X-or pattern            */
+	int i;			/*  counter                      */
+	int k;			/*  byte being shifted into crc  */
+
+	static int p[] = { 0, 1, 2, 4, 5, 7, 8, 10, 11, 12, 16, 22, 23, 26 };
+
+	for (i = 0; i < sizeof(p) / sizeof(int); i++) {
+		e |= 1L << (31 - p[i]);
+	}
+
+	for (i = 1; i < 256; i++) {
+		c = i;
+		for (k = 8; k; k--) {
+			c = c & 1 ? (c >> 1) ^ e : c >> 1;
+		}
+		sxg_crc_table[i] = c;
+	}
+}
+
+#if XXXTODO
+static u32 sxg_crc_init;	/* Is table initialized */
+/*
+ *  Return the MAC hast as described above.
+ */
+static unsigned char sxg_mcast_get_mac_hash(char *macaddr)
+{
+	u32 crc;
+	char *p;
+	int i;
+	unsigned char machash = 0;
+
+	if (!sxg_crc_init) {
+		sxg_mcast_init_crc32();
+		sxg_crc_init = 1;
+	}
+
+	crc = 0xFFFFFFFF;	/* Preload shift register, per crc-32 spec */
+	for (i = 0, p = macaddr; i < 6; ++p, ++i) {
+		crc = (crc >> 8) ^ sxg_crc_table[(crc ^ *p) & 0xFF];
+	}
+
+	/* Return bits 1-8, transposed */
+	for (i = 1; i < 9; i++) {
+		machash |= (((crc >> i) & 1) << (8 - i));
+	}
+
+	return (machash);
+}
+
+static void sxg_mcast_set_mask(p_adapter_t adapter)
+{
+	PSXG_UCODE_REGS sxg_regs = adapter->UcodeRegs;
+
+	DBG_ERROR("%s ENTER (%s) macopts[%x] mask[%llx]\n", __func__,
+		  adapter->netdev->name, (unsigned int)adapter->MacFilter,
+		  adapter->MulticastMask);
+
+	if (adapter->MacFilter & (MAC_ALLMCAST | MAC_PROMISC)) {
+		/* Turn on all multicast addresses. We have to do this for promiscuous
+		 * mode as well as ALLMCAST mode.  It saves the Microcode from having
+		 * to keep state about the MAC configuration.
+		 */
+/*              DBG_ERROR("sxg: %s macopts = MAC_ALLMCAST | MAC_PROMISC\n      SLUT MODE!!!\n",__func__); */
+		WRITE_REG(sxg_regs->McastLow, 0xFFFFFFFF, FLUSH);
+		WRITE_REG(sxg_regs->McastHigh, 0xFFFFFFFF, FLUSH);
+/*        DBG_ERROR("%s (%s) WRITE to slic_regs slic_mcastlow&high 0xFFFFFFFF\n",__func__, adapter->netdev->name); */
+
+	} else {
+		/* Commit our multicast mast to the SLIC by writing to the multicast
+		 * address mask registers
+		 */
+		DBG_ERROR("%s (%s) WRITE mcastlow[%lx] mcasthigh[%lx]\n",
+			  __func__, adapter->netdev->name,
+			  ((ulong) (adapter->MulticastMask & 0xFFFFFFFF)),
+			  ((ulong)
+			   ((adapter->MulticastMask >> 32) & 0xFFFFFFFF)));
+
+		WRITE_REG(sxg_regs->McastLow,
+			  (u32) (adapter->MulticastMask & 0xFFFFFFFF), FLUSH);
+		WRITE_REG(sxg_regs->McastHigh,
+			  (u32) ((adapter->
+				  MulticastMask >> 32) & 0xFFFFFFFF), FLUSH);
+	}
+}
+
+/*
  *  Allocate a mcast_address structure to hold the multicast address.
  *  Link it in.
  */
@@ -2699,72 +2803,6 @@
 	return (STATUS_SUCCESS);
 }
 
-/*
- * Functions to obtain the CRC corresponding to the destination mac address.
- * This is a standard ethernet CRC in that it is a 32-bit, reflected CRC using
- * the polynomial:
- *   x^32 + x^26 + x^23 + x^22 + x^16 + x^12 + x^11 + x^10 + x^8 + x^7 + x^5 + x^4 + x^2 + x^1.
- *
- * After the CRC for the 6 bytes is generated (but before the value is complemented),
- * we must then transpose the value and return bits 30-23.
- *
- */
-static u32 sxg_crc_table[256];	/* Table of CRC's for all possible byte values */
-static u32 sxg_crc_init;	/* Is table initialized                        */
-
-/*
- *  Contruct the CRC32 table
- */
-static void sxg_mcast_init_crc32(void)
-{
-	u32 c;			/*  CRC shit reg                 */
-	u32 e = 0;		/*  Poly X-or pattern            */
-	int i;			/*  counter                      */
-	int k;			/*  byte being shifted into crc  */
-
-	static int p[] = { 0, 1, 2, 4, 5, 7, 8, 10, 11, 12, 16, 22, 23, 26 };
-
-	for (i = 0; i < sizeof(p) / sizeof(int); i++) {
-		e |= 1L << (31 - p[i]);
-	}
-
-	for (i = 1; i < 256; i++) {
-		c = i;
-		for (k = 8; k; k--) {
-			c = c & 1 ? (c >> 1) ^ e : c >> 1;
-		}
-		sxg_crc_table[i] = c;
-	}
-}
-
-/*
- *  Return the MAC hast as described above.
- */
-static unsigned char sxg_mcast_get_mac_hash(char *macaddr)
-{
-	u32 crc;
-	char *p;
-	int i;
-	unsigned char machash = 0;
-
-	if (!sxg_crc_init) {
-		sxg_mcast_init_crc32();
-		sxg_crc_init = 1;
-	}
-
-	crc = 0xFFFFFFFF;	/* Preload shift register, per crc-32 spec */
-	for (i = 0, p = macaddr; i < 6; ++p, ++i) {
-		crc = (crc >> 8) ^ sxg_crc_table[(crc ^ *p) & 0xFF];
-	}
-
-	/* Return bits 1-8, transposed */
-	for (i = 1; i < 9; i++) {
-		machash |= (((crc >> i) & 1) << (8 - i));
-	}
-
-	return (machash);
-}
-
 static void sxg_mcast_set_bit(p_adapter_t adapter, char *address)
 {
 	unsigned char crcpoly;
@@ -2783,7 +2821,6 @@
 
 static void sxg_mcast_set_list(p_net_device dev)
 {
-#if XXXTODO
 	p_adapter_t adapter = (p_adapter_t) netdev_priv(dev);
 	int status = STATUS_SUCCESS;
 	int i;
@@ -2809,7 +2846,7 @@
 	}
 
 	DBG_ERROR("%s a->devflags_prev[%x] dev->flags[%x] status[%x]\n",
-		  __FUNCTION__, adapter->devflags_prev, dev->flags, status);
+		  __func__, adapter->devflags_prev, dev->flags, status);
 	if (adapter->devflags_prev != dev->flags) {
 		adapter->macopts = MAC_DIRECTED;
 		if (dev->flags) {
@@ -2828,60 +2865,24 @@
 		}
 		adapter->devflags_prev = dev->flags;
 		DBG_ERROR("%s call sxg_config_set adapter->macopts[%x]\n",
-			  __FUNCTION__, adapter->macopts);
+			  __func__, adapter->macopts);
 		sxg_config_set(adapter, TRUE);
 	} else {
 		if (status == STATUS_SUCCESS) {
 			sxg_mcast_set_mask(adapter);
 		}
 	}
-#endif
 	return;
 }
-
-static void sxg_mcast_set_mask(p_adapter_t adapter)
-{
-	PSXG_UCODE_REGS sxg_regs = adapter->UcodeRegs;
-
-	DBG_ERROR("%s ENTER (%s) macopts[%x] mask[%llx]\n", __FUNCTION__,
-		  adapter->netdev->name, (unsigned int)adapter->MacFilter,
-		  adapter->MulticastMask);
-
-	if (adapter->MacFilter & (MAC_ALLMCAST | MAC_PROMISC)) {
-		/* Turn on all multicast addresses. We have to do this for promiscuous
-		 * mode as well as ALLMCAST mode.  It saves the Microcode from having
-		 * to keep state about the MAC configuration.
-		 */
-//              DBG_ERROR("sxg: %s macopts = MAC_ALLMCAST | MAC_PROMISC\n      SLUT MODE!!!\n",__FUNCTION__);
-		WRITE_REG(sxg_regs->McastLow, 0xFFFFFFFF, FLUSH);
-		WRITE_REG(sxg_regs->McastHigh, 0xFFFFFFFF, FLUSH);
-//        DBG_ERROR("%s (%s) WRITE to slic_regs slic_mcastlow&high 0xFFFFFFFF\n",__FUNCTION__, adapter->netdev->name);
-
-	} else {
-		/* Commit our multicast mast to the SLIC by writing to the multicast
-		 * address mask registers
-		 */
-		DBG_ERROR("%s (%s) WRITE mcastlow[%lx] mcasthigh[%lx]\n",
-			  __FUNCTION__, adapter->netdev->name,
-			  ((ulong) (adapter->MulticastMask & 0xFFFFFFFF)),
-			  ((ulong)
-			   ((adapter->MulticastMask >> 32) & 0xFFFFFFFF)));
-
-		WRITE_REG(sxg_regs->McastLow,
-			  (u32) (adapter->MulticastMask & 0xFFFFFFFF), FLUSH);
-		WRITE_REG(sxg_regs->McastHigh,
-			  (u32) ((adapter->
-				  MulticastMask >> 32) & 0xFFFFFFFF), FLUSH);
-	}
-}
+#endif
 
 static void sxg_unmap_mmio_space(p_adapter_t adapter)
 {
 #if LINUX_FREES_ADAPTER_RESOURCES
-//      if (adapter->Regs) {
-//              iounmap(adapter->Regs);
-//      }
-//      adapter->slic_regs = NULL;
+/*      if (adapter->Regs) { */
+/*              iounmap(adapter->Regs); */
+/*      } */
+/*      adapter->slic_regs = NULL; */
 #endif
 }
 
@@ -2909,8 +2910,8 @@
 	IsrCount = adapter->MsiEnabled ? RssIds : 1;
 
 	if (adapter->BasicAllocations == FALSE) {
-		// No allocations have been made, including spinlocks,
-		// or listhead initializations.  Return.
+		/* No allocations have been made, including spinlocks, */
+		/* or listhead initializations.  Return. */
 		return;
 	}
 
@@ -2920,7 +2921,7 @@
 	if (!(IsListEmpty(&adapter->AllSglBuffers))) {
 		SxgFreeSglBuffers(adapter);
 	}
-	// Free event queues.
+	/* Free event queues. */
 	if (adapter->EventRings) {
 		pci_free_consistent(adapter->pcidev,
 				    sizeof(SXG_EVENT_RING) * RssIds,
@@ -2947,17 +2948,17 @@
 	SXG_FREE_PACKET_POOL(adapter->PacketPoolHandle);
 	SXG_FREE_BUFFER_POOL(adapter->BufferPoolHandle);
 
-	// Unmap register spaces
+	/* Unmap register spaces */
 	SxgUnmapResources(adapter);
 
-	// Deregister DMA
+	/* Deregister DMA */
 	if (adapter->DmaHandle) {
 		SXG_DEREGISTER_DMA(adapter->DmaHandle);
 	}
-	// Deregister interrupt
+	/* Deregister interrupt */
 	SxgDeregisterInterrupt(adapter);
 
-	// Possibly free system info (5.2 only)
+	/* Possibly free system info (5.2 only) */
 	SXG_RELEASE_SYSTEM_INFO(adapter);
 
 	SxgDiagFreeResources(adapter);
@@ -3047,23 +3048,23 @@
 
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AllocMem",
 		  adapter, Size, BufferType, 0);
-	// Grab the adapter lock and check the state.
-	// If we're in anything other than INITIALIZING or
-	// RUNNING state, fail.  This is to prevent
-	// allocations in an improper driver state
+	/* Grab the adapter lock and check the state. */
+	/* If we're in anything other than INITIALIZING or */
+	/* RUNNING state, fail.  This is to prevent */
+	/* allocations in an improper driver state */
 	spin_lock(&adapter->AdapterLock);
 
-	// Increment the AllocationsPending count while holding
-	// the lock.  Pause processing relies on this
+	/* Increment the AllocationsPending count while holding */
+	/* the lock.  Pause processing relies on this */
 	++adapter->AllocationsPending;
 	spin_unlock(&adapter->AdapterLock);
 
-	// At initialization time allocate resources synchronously.
+	/* At initialization time allocate resources synchronously. */
 	Buffer = pci_alloc_consistent(adapter->pcidev, Size, &pBuffer);
 	if (Buffer == NULL) {
 		spin_lock(&adapter->AdapterLock);
-		// Decrement the AllocationsPending count while holding
-		// the lock.  Pause processing relies on this
+		/* Decrement the AllocationsPending count while holding */
+		/* the lock.  Pause processing relies on this */
 		--adapter->AllocationsPending;
 		spin_unlock(&adapter->AdapterLock);
 		SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AlcMemF1",
@@ -3113,10 +3114,10 @@
 	ASSERT((BufferSize == SXG_RCV_DATA_BUFFER_SIZE) ||
 	       (BufferSize == SXG_RCV_JUMBO_BUFFER_SIZE));
 	ASSERT(Length == SXG_RCV_BLOCK_SIZE(BufferSize));
-	// First, initialize the contained pool of receive data
-	// buffers.  This initialization requires NBL/NB/MDL allocations,
-	// If any of them fail, free the block and return without
-	// queueing the shared memory
+	/* First, initialize the contained pool of receive data */
+	/* buffers.  This initialization requires NBL/NB/MDL allocations, */
+	/* If any of them fail, free the block and return without */
+	/* queueing the shared memory */
 	RcvDataBuffer = RcvBlock;
 #if 0
 	for (i = 0, Paddr = *PhysicalAddress;
@@ -3126,14 +3127,14 @@
 		for (i = 0, Paddr = PhysicalAddress;
 		     i < SXG_RCV_DESCRIPTORS_PER_BLOCK;
 		     i++, Paddr += BufferSize, RcvDataBuffer += BufferSize) {
-			//
+			/* */
 			RcvDataBufferHdr =
 			    (PSXG_RCV_DATA_BUFFER_HDR) (RcvDataBuffer +
 							SXG_RCV_DATA_BUFFER_HDR_OFFSET
 							(BufferSize));
 			RcvDataBufferHdr->VirtualAddress = RcvDataBuffer;
 			RcvDataBufferHdr->PhysicalAddress = Paddr;
-			RcvDataBufferHdr->State = SXG_BUFFER_UPSTREAM;	// For FREE macro assertion
+			RcvDataBufferHdr->State = SXG_BUFFER_UPSTREAM;	/* For FREE macro assertion */
 			RcvDataBufferHdr->Size =
 			    SXG_RCV_BUFFER_DATA_SIZE(BufferSize);
 
@@ -3143,8 +3144,8 @@
 
 		}
 
-	// Place this entire block of memory on the AllRcvBlocks queue so it can be
-	// free later
+	/* Place this entire block of memory on the AllRcvBlocks queue so it can be */
+	/* free later */
 	RcvBlockHdr =
 	    (PSXG_RCV_BLOCK_HDR) ((unsigned char *)RcvBlock +
 				  SXG_RCV_BLOCK_HDR_OFFSET(BufferSize));
@@ -3155,7 +3156,7 @@
 	InsertTailList(&adapter->AllRcvBlocks, &RcvBlockHdr->AllList);
 	spin_unlock(&adapter->RcvQLock);
 
-	// Now free the contained receive data buffers that we initialized above
+	/* Now free the contained receive data buffers that we initialized above */
 	RcvDataBuffer = RcvBlock;
 	for (i = 0, Paddr = PhysicalAddress;
 	     i < SXG_RCV_DESCRIPTORS_PER_BLOCK;
@@ -3168,7 +3169,7 @@
 		spin_unlock(&adapter->RcvQLock);
 	}
 
-	// Locate the descriptor block and put it on a separate free queue
+	/* Locate the descriptor block and put it on a separate free queue */
 	RcvDescriptorBlock =
 	    (PSXG_RCV_DESCRIPTOR_BLOCK) ((unsigned char *)RcvBlock +
 					 SXG_RCV_DESCRIPTOR_BLOCK_OFFSET
@@ -3186,7 +3187,7 @@
 		  adapter, RcvBlock, Length, 0);
 	return;
       fail:
-	// Free any allocated resources
+	/* Free any allocated resources */
 	if (RcvBlock) {
 		RcvDataBuffer = RcvBlock;
 		for (i = 0; i < SXG_RCV_DESCRIPTORS_PER_BLOCK;
@@ -3200,7 +3201,7 @@
 		pci_free_consistent(adapter->pcidev,
 				    Length, RcvBlock, PhysicalAddress);
 	}
-	DBG_ERROR("%s: OUT OF RESOURCES\n", __FUNCTION__);
+	DBG_ERROR("%s: OUT OF RESOURCES\n", __func__);
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "RcvAFail",
 		  adapter, adapter->FreeRcvBufferCount,
 		  adapter->FreeRcvBlockCount, adapter->AllRcvBlockCount);
@@ -3230,7 +3231,7 @@
 	adapter->AllSglBufferCount++;
 	memset(SxgSgl, 0, sizeof(SXG_SCATTER_GATHER));
 	SxgSgl->PhysicalAddress = PhysicalAddress;	/* *PhysicalAddress; */
-	SxgSgl->adapter = adapter;	// Initialize backpointer once
+	SxgSgl->adapter = adapter;	/* Initialize backpointer once */
 	InsertTailList(&adapter->AllSglBuffers, &SxgSgl->AllList);
 	spin_unlock(&adapter->SglQLock);
 	SxgSgl->State = SXG_BUFFER_BUSY;
@@ -3244,14 +3245,14 @@
 
 static void sxg_adapter_set_hwaddr(p_adapter_t adapter)
 {
-//  DBG_ERROR ("%s ENTER card->config_set[%x] port[%d] physport[%d] funct#[%d]\n", __FUNCTION__,
-//             card->config_set, adapter->port, adapter->physport, adapter->functionnumber);
-//
-//  sxg_dbg_macaddrs(adapter);
+/*  DBG_ERROR ("%s ENTER card->config_set[%x] port[%d] physport[%d] funct#[%d]\n", __func__, */
+/*             card->config_set, adapter->port, adapter->physport, adapter->functionnumber); */
+/* */
+/*  sxg_dbg_macaddrs(adapter); */
 
 	memcpy(adapter->macaddr, temp_mac_address, sizeof(SXG_CONFIG_MAC));
-//      DBG_ERROR ("%s AFTER copying from config.macinfo into currmacaddr\n", __FUNCTION__);
-//      sxg_dbg_macaddrs(adapter);
+/*      DBG_ERROR ("%s AFTER copying from config.macinfo into currmacaddr\n", __func__); */
+/*      sxg_dbg_macaddrs(adapter); */
 	if (!(adapter->currmacaddr[0] ||
 	      adapter->currmacaddr[1] ||
 	      adapter->currmacaddr[2] ||
@@ -3262,18 +3263,18 @@
 	if (adapter->netdev) {
 		memcpy(adapter->netdev->dev_addr, adapter->currmacaddr, 6);
 	}
-//  DBG_ERROR ("%s EXIT port %d\n", __FUNCTION__, adapter->port);
+/*  DBG_ERROR ("%s EXIT port %d\n", __func__, adapter->port); */
 	sxg_dbg_macaddrs(adapter);
 
 }
 
+#if XXXTODO
 static int sxg_mac_set_address(p_net_device dev, void *ptr)
 {
-#if XXXTODO
 	p_adapter_t adapter = (p_adapter_t) netdev_priv(dev);
 	struct sockaddr *addr = ptr;
 
-	DBG_ERROR("%s ENTER (%s)\n", __FUNCTION__, adapter->netdev->name);
+	DBG_ERROR("%s ENTER (%s)\n", __func__, adapter->netdev->name);
 
 	if (netif_running(dev)) {
 		return -EBUSY;
@@ -3282,22 +3283,22 @@
 		return -EBUSY;
 	}
 	DBG_ERROR("sxg: %s (%s) curr %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
-		  __FUNCTION__, adapter->netdev->name, adapter->currmacaddr[0],
+		  __func__, adapter->netdev->name, adapter->currmacaddr[0],
 		  adapter->currmacaddr[1], adapter->currmacaddr[2],
 		  adapter->currmacaddr[3], adapter->currmacaddr[4],
 		  adapter->currmacaddr[5]);
 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
 	memcpy(adapter->currmacaddr, addr->sa_data, dev->addr_len);
 	DBG_ERROR("sxg: %s (%s) new %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
-		  __FUNCTION__, adapter->netdev->name, adapter->currmacaddr[0],
+		  __func__, adapter->netdev->name, adapter->currmacaddr[0],
 		  adapter->currmacaddr[1], adapter->currmacaddr[2],
 		  adapter->currmacaddr[3], adapter->currmacaddr[4],
 		  adapter->currmacaddr[5]);
 
 	sxg_config_set(adapter, TRUE);
-#endif
 	return 0;
 }
+#endif
 
 /*****************************************************************************/
 /*************  SXG DRIVER FUNCTIONS  (below) ********************************/
@@ -3321,77 +3322,77 @@
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "InitAdpt",
 		  adapter, 0, 0, 0);
 
-	RssIds = 1;		//  XXXTODO  SXG_RSS_CPU_COUNT(adapter);
+	RssIds = 1;		/*  XXXTODO  SXG_RSS_CPU_COUNT(adapter); */
 	IsrCount = adapter->MsiEnabled ? RssIds : 1;
 
-	// Sanity check SXG_UCODE_REGS structure definition to
-	// make sure the length is correct
+	/* Sanity check SXG_UCODE_REGS structure definition to */
+	/* make sure the length is correct */
 	ASSERT(sizeof(SXG_UCODE_REGS) == SXG_REGISTER_SIZE_PER_CPU);
 
-	// Disable interrupts
+	/* Disable interrupts */
 	SXG_DISABLE_ALL_INTERRUPTS(adapter);
 
-	// Set MTU
+	/* Set MTU */
 	ASSERT((adapter->FrameSize == ETHERMAXFRAME) ||
 	       (adapter->FrameSize == JUMBOMAXFRAME));
 	WRITE_REG(adapter->UcodeRegs[0].LinkMtu, adapter->FrameSize, TRUE);
 
-	// Set event ring base address and size
+	/* Set event ring base address and size */
 	WRITE_REG64(adapter,
 		    adapter->UcodeRegs[0].EventBase, adapter->PEventRings, 0);
 	WRITE_REG(adapter->UcodeRegs[0].EventSize, EVENT_RING_SIZE, TRUE);
 
-	// Per-ISR initialization
+	/* Per-ISR initialization */
 	for (i = 0; i < IsrCount; i++) {
 		u64 Addr;
-		// Set interrupt status pointer
+		/* Set interrupt status pointer */
 		Addr = adapter->PIsr + (i * sizeof(u32));
 		WRITE_REG64(adapter, adapter->UcodeRegs[i].Isp, Addr, i);
 	}
 
-	// XMT ring zero index
+	/* XMT ring zero index */
 	WRITE_REG64(adapter,
 		    adapter->UcodeRegs[0].SPSendIndex,
 		    adapter->PXmtRingZeroIndex, 0);
 
-	// Per-RSS initialization
+	/* Per-RSS initialization */
 	for (i = 0; i < RssIds; i++) {
-		// Release all event ring entries to the Microcode
+		/* Release all event ring entries to the Microcode */
 		WRITE_REG(adapter->UcodeRegs[i].EventRelease, EVENT_RING_SIZE,
 			  TRUE);
 	}
 
-	// Transmit ring base and size
+	/* Transmit ring base and size */
 	WRITE_REG64(adapter,
 		    adapter->UcodeRegs[0].XmtBase, adapter->PXmtRings, 0);
 	WRITE_REG(adapter->UcodeRegs[0].XmtSize, SXG_XMT_RING_SIZE, TRUE);
 
-	// Receive ring base and size
+	/* Receive ring base and size */
 	WRITE_REG64(adapter,
 		    adapter->UcodeRegs[0].RcvBase, adapter->PRcvRings, 0);
 	WRITE_REG(adapter->UcodeRegs[0].RcvSize, SXG_RCV_RING_SIZE, TRUE);
 
-	// Populate the card with receive buffers
+	/* Populate the card with receive buffers */
 	sxg_stock_rcv_buffers(adapter);
 
-	// Initialize checksum offload capabilities.  At the moment
-	// we always enable IP and TCP receive checksums on the card.
-	// Depending on the checksum configuration specified by the
-	// user, we can choose to report or ignore the checksum
-	// information provided by the card.
+	/* Initialize checksum offload capabilities.  At the moment */
+	/* we always enable IP and TCP receive checksums on the card. */
+	/* Depending on the checksum configuration specified by the */
+	/* user, we can choose to report or ignore the checksum */
+	/* information provided by the card. */
 	WRITE_REG(adapter->UcodeRegs[0].ReceiveChecksum,
 		  SXG_RCV_TCP_CSUM_ENABLED | SXG_RCV_IP_CSUM_ENABLED, TRUE);
 
-	// Initialize the MAC, XAUI
-	DBG_ERROR("sxg: %s ENTER sxg_initialize_link\n", __FUNCTION__);
+	/* Initialize the MAC, XAUI */
+	DBG_ERROR("sxg: %s ENTER sxg_initialize_link\n", __func__);
 	status = sxg_initialize_link(adapter);
-	DBG_ERROR("sxg: %s EXIT sxg_initialize_link status[%x]\n", __FUNCTION__,
+	DBG_ERROR("sxg: %s EXIT sxg_initialize_link status[%x]\n", __func__,
 		  status);
 	if (status != STATUS_SUCCESS) {
 		return (status);
 	}
-	// Initialize Dead to FALSE.
-	// SlicCheckForHang or SlicDumpThread will take it from here.
+	/* Initialize Dead to FALSE. */
+	/* SlicCheckForHang or SlicDumpThread will take it from here. */
 	adapter->Dead = FALSE;
 	adapter->PingOutstanding = FALSE;
 
@@ -3428,14 +3429,14 @@
 
 	ASSERT(RcvDescriptorBlockHdr);
 
-	// If we don't have the resources to fill the descriptor block,
-	// return failure
+	/* If we don't have the resources to fill the descriptor block, */
+	/* return failure */
 	if ((adapter->FreeRcvBufferCount < SXG_RCV_DESCRIPTORS_PER_BLOCK) ||
 	    SXG_RING_FULL(RcvRingInfo)) {
 		adapter->Stats.NoMem++;
 		return (STATUS_FAILURE);
 	}
-	// Get a ring descriptor command
+	/* Get a ring descriptor command */
 	SXG_GET_CMD(RingZero,
 		    RcvRingInfo, RingDescriptorCmd, RcvDescriptorBlockHdr);
 	ASSERT(RingDescriptorCmd);
@@ -3443,7 +3444,7 @@
 	RcvDescriptorBlock =
 	    (PSXG_RCV_DESCRIPTOR_BLOCK) RcvDescriptorBlockHdr->VirtualAddress;
 
-	// Fill in the descriptor block
+	/* Fill in the descriptor block */
 	for (i = 0; i < SXG_RCV_DESCRIPTORS_PER_BLOCK; i++) {
 		SXG_GET_RCV_DATA_BUFFER(adapter, RcvDataBufferHdr);
 		ASSERT(RcvDataBufferHdr);
@@ -3454,13 +3455,13 @@
 		RcvDescriptorBlock->Descriptors[i].PhysicalAddress =
 		    RcvDataBufferHdr->PhysicalAddress;
 	}
-	// Add the descriptor block to receive descriptor ring 0
+	/* Add the descriptor block to receive descriptor ring 0 */
 	RingDescriptorCmd->Sgl = RcvDescriptorBlockHdr->PhysicalAddress;
 
-	// RcvBuffersOnCard is not protected via the receive lock (see
-	// sxg_process_event_queue) We don't want to grap a lock every time a
-	// buffer is returned to us, so we use atomic interlocked functions
-	// instead.
+	/* RcvBuffersOnCard is not protected via the receive lock (see */
+	/* sxg_process_event_queue) We don't want to grap a lock every time a */
+	/* buffer is returned to us, so we use atomic interlocked functions */
+	/* instead. */
 	adapter->RcvBuffersOnCard += SXG_RCV_DESCRIPTORS_PER_BLOCK;
 
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DscBlk",
@@ -3490,10 +3491,10 @@
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "StockBuf",
 		  adapter, adapter->RcvBuffersOnCard,
 		  adapter->FreeRcvBufferCount, adapter->AllRcvBlockCount);
-	// First, see if we've got less than our minimum threshold of
-	// receive buffers, there isn't an allocation in progress, and
-	// we haven't exceeded our maximum.. get another block of buffers
-	// None of this needs to be SMP safe.  It's round numbers.
+	/* First, see if we've got less than our minimum threshold of */
+	/* receive buffers, there isn't an allocation in progress, and */
+	/* we haven't exceeded our maximum.. get another block of buffers */
+	/* None of this needs to be SMP safe.  It's round numbers. */
 	if ((adapter->FreeRcvBufferCount < SXG_MIN_RCV_DATA_BUFFERS) &&
 	    (adapter->AllRcvBlockCount < SXG_MAX_RCV_BLOCKS) &&
 	    (adapter->AllocationsPending == 0)) {
@@ -3502,12 +3503,12 @@
 							      ReceiveBufferSize),
 					   SXG_BUFFER_TYPE_RCV);
 	}
-	// Now grab the RcvQLock lock and proceed
+	/* Now grab the RcvQLock lock and proceed */
 	spin_lock(&adapter->RcvQLock);
 	while (adapter->RcvBuffersOnCard < SXG_RCV_DATA_BUFFERS) {
 		PLIST_ENTRY _ple;
 
-		// Get a descriptor block
+		/* Get a descriptor block */
 		RcvDescriptorBlockHdr = NULL;
 		if (adapter->FreeRcvBlockCount) {
 			_ple = RemoveHeadList(&adapter->FreeRcvBlocks);
@@ -3519,14 +3520,14 @@
 		}
 
 		if (RcvDescriptorBlockHdr == NULL) {
-			// Bail out..
+			/* Bail out.. */
 			adapter->Stats.NoMem++;
 			break;
 		}
-		// Fill in the descriptor block and give it to the card
+		/* Fill in the descriptor block and give it to the card */
 		if (sxg_fill_descriptor_block(adapter, RcvDescriptorBlockHdr) ==
 		    STATUS_FAILURE) {
-			// Free the descriptor block
+			/* Free the descriptor block */
 			SXG_FREE_RCV_DESCRIPTOR_BLOCK(adapter,
 						      RcvDescriptorBlockHdr);
 			break;
@@ -3560,15 +3561,15 @@
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "CmpRBlks",
 		  adapter, Index, RcvRingInfo->Head, RcvRingInfo->Tail);
 
-	// Now grab the RcvQLock lock and proceed
+	/* Now grab the RcvQLock lock and proceed */
 	spin_lock(&adapter->RcvQLock);
 	ASSERT(Index != RcvRingInfo->Tail);
 	while (RcvRingInfo->Tail != Index) {
-		//
-		// Locate the current Cmd (ring descriptor entry), and
-		// associated receive descriptor block, and advance
-		// the tail
-		//
+		/* */
+		/* Locate the current Cmd (ring descriptor entry), and */
+		/* associated receive descriptor block, and advance */
+		/* the tail */
+		/* */
 		SXG_RETURN_CMD(RingZero,
 			       RcvRingInfo,
 			       RingDescriptorCmd, RcvDescriptorBlockHdr);
@@ -3576,12 +3577,12 @@
 			  RcvRingInfo->Head, RcvRingInfo->Tail,
 			  RingDescriptorCmd, RcvDescriptorBlockHdr);
 
-		// Clear the SGL field
+		/* Clear the SGL field */
 		RingDescriptorCmd->Sgl = 0;
-		// Attempt to refill it and hand it right back to the
-		// card.  If we fail to refill it, free the descriptor block
-		// header.  The card will be restocked later via the
-		// RcvBuffersOnCard test
+		/* Attempt to refill it and hand it right back to the */
+		/* card.  If we fail to refill it, free the descriptor block */
+		/* header.  The card will be restocked later via the */
+		/* RcvBuffersOnCard test */
 		if (sxg_fill_descriptor_block(adapter, RcvDescriptorBlockHdr) ==
 		    STATUS_FAILURE) {
 			SXG_FREE_RCV_DESCRIPTOR_BLOCK(adapter,
diff --git a/drivers/staging/sxg/sxg_os.h b/drivers/staging/sxg/sxg_os.h
index 26fb0ff..0118268 100644
--- a/drivers/staging/sxg/sxg_os.h
+++ b/drivers/staging/sxg/sxg_os.h
@@ -44,7 +44,6 @@
 #define FALSE	(0)
 #define TRUE	(1)
 
-
 typedef struct _LIST_ENTRY {
 	struct _LIST_ENTRY *nle_flink;
 	struct _LIST_ENTRY *nle_blink;
@@ -69,35 +68,32 @@
 
 /* These two have to be inlined since they return things. */
 
-static __inline PLIST_ENTRY
-RemoveHeadList(list_entry *l)
+static __inline PLIST_ENTRY RemoveHeadList(list_entry * l)
 {
-        list_entry              *f;
-        list_entry              *e;
+	list_entry *f;
+	list_entry *e;
 
-        e = l->nle_flink;
-        f = e->nle_flink;
-        l->nle_flink = f;
-        f->nle_blink = l;
+	e = l->nle_flink;
+	f = e->nle_flink;
+	l->nle_flink = f;
+	f->nle_blink = l;
 
-        return (e);
+	return (e);
 }
 
-static __inline PLIST_ENTRY
-RemoveTailList(list_entry *l)
+static __inline PLIST_ENTRY RemoveTailList(list_entry * l)
 {
-        list_entry              *b;
-        list_entry              *e;
+	list_entry *b;
+	list_entry *e;
 
-        e = l->nle_blink;
-        b = e->nle_blink;
-        l->nle_blink = b;
-        b->nle_flink = l;
+	e = l->nle_blink;
+	b = e->nle_blink;
+	l->nle_blink = b;
+	b->nle_flink = l;
 
-        return (e);
+	return (e);
 }
 
-
 #define InsertTailList(l, e)                    \
         do {                                    \
                 list_entry              *b;     \
@@ -120,7 +116,6 @@
                 (l)->nle_flink = (e);           \
         } while (0)
 
-
 #define ATK_DEBUG  1
 
 #if ATK_DEBUG
@@ -133,7 +128,6 @@
 #define SLIC_TIMESTAMP(value)
 #endif
 
-
 /******************  SXG DEFINES  *****************************************/
 
 #ifdef  ATKDBG
@@ -150,5 +144,4 @@
 #define WRITE_REG64(a,reg,value,cpu)                sxg_reg64_write((a),(&reg),(value),(cpu))
 #define READ_REG(reg,value)   (value) = readl((void __iomem *)(&reg))
 
-#endif  /* _SLIC_OS_SPECIFIC_H_  */
-
+#endif /* _SLIC_OS_SPECIFIC_H_  */
diff --git a/drivers/staging/sxg/sxgdbg.h b/drivers/staging/sxg/sxgdbg.h
index cfb6c7c..4522b8d 100644
--- a/drivers/staging/sxg/sxgdbg.h
+++ b/drivers/staging/sxg/sxgdbg.h
@@ -58,7 +58,7 @@
     {                                                                             \
         if (!(a)) {                                                               \
             DBG_ERROR("ASSERT() Failure: file %s, function %s  line %d\n",\
-                __FILE__, __FUNCTION__, __LINE__);                                \
+                __FILE__, __func__, __LINE__);                                \
         }                                                                         \
     }
 #endif
diff --git a/drivers/staging/sxg/sxghif.h b/drivers/staging/sxg/sxghif.h
index ed26cea..88bffba 100644
--- a/drivers/staging/sxg/sxghif.h
+++ b/drivers/staging/sxg/sxghif.h
@@ -14,119 +14,119 @@
  *******************************************************************************/
 typedef struct _SXG_UCODE_REGS {
 	// Address 0 - 0x3F = Command codes 0-15 for TCB 0.  Excode 0
-	u32		Icr;			// Code = 0 (extended), ExCode = 0 - Int control
-	u32		RsvdReg1;		// Code = 1 - TOE -NA
-	u32		RsvdReg2;		// Code = 2 - TOE -NA
-	u32		RsvdReg3;		// Code = 3 - TOE -NA
-	u32		RsvdReg4;		// Code = 4 - TOE -NA
-	u32		RsvdReg5;		// Code = 5 - TOE -NA
-	u32		CardUp;			// Code = 6 - Microcode initialized when 1
-	u32		RsvdReg7;		// Code = 7 - TOE -NA
-	u32		CodeNotUsed[8];		// Codes 8-15 not used.  ExCode = 0
+	u32 Icr;		// Code = 0 (extended), ExCode = 0 - Int control
+	u32 RsvdReg1;		// Code = 1 - TOE -NA
+	u32 RsvdReg2;		// Code = 2 - TOE -NA
+	u32 RsvdReg3;		// Code = 3 - TOE -NA
+	u32 RsvdReg4;		// Code = 4 - TOE -NA
+	u32 RsvdReg5;		// Code = 5 - TOE -NA
+	u32 CardUp;		// Code = 6 - Microcode initialized when 1
+	u32 RsvdReg7;		// Code = 7 - TOE -NA
+	u32 CodeNotUsed[8];	// Codes 8-15 not used.  ExCode = 0
 	// This brings us to ExCode 1 at address 0x40 = Interrupt status pointer
-	u32		Isp;			// Code = 0 (extended), ExCode = 1
-	u32		PadEx1[15];		// Codes 1-15 not used with extended codes
+	u32 Isp;		// Code = 0 (extended), ExCode = 1
+	u32 PadEx1[15];		// Codes 1-15 not used with extended codes
 	// ExCode 2 = Interrupt Status Register
-	u32		Isr;			// Code = 0 (extended), ExCode = 2
-	u32		PadEx2[15];
+	u32 Isr;		// Code = 0 (extended), ExCode = 2
+	u32 PadEx2[15];
 	// ExCode 3 = Event base register.  Location of event rings
-	u32		EventBase;		// Code = 0 (extended), ExCode = 3
-	u32		PadEx3[15];
+	u32 EventBase;		// Code = 0 (extended), ExCode = 3
+	u32 PadEx3[15];
 	// ExCode 4 = Event ring size
-	u32		EventSize;		// Code = 0 (extended), ExCode = 4
-	u32		PadEx4[15];
+	u32 EventSize;		// Code = 0 (extended), ExCode = 4
+	u32 PadEx4[15];
 	// ExCode 5 = TCB Buffers base address
-	u32		TcbBase;		// Code = 0 (extended), ExCode = 5
-	u32		PadEx5[15];
+	u32 TcbBase;		// Code = 0 (extended), ExCode = 5
+	u32 PadEx5[15];
 	// ExCode 6 = TCB Composite Buffers base address
-	u32		TcbCompBase;		// Code = 0 (extended), ExCode = 6
-	u32		PadEx6[15];
+	u32 TcbCompBase;	// Code = 0 (extended), ExCode = 6
+	u32 PadEx6[15];
 	// ExCode 7 = Transmit ring base address
-	u32		XmtBase;		// Code = 0 (extended), ExCode = 7
-	u32		PadEx7[15];
+	u32 XmtBase;		// Code = 0 (extended), ExCode = 7
+	u32 PadEx7[15];
 	// ExCode 8 = Transmit ring size
-	u32		XmtSize;		// Code = 0 (extended), ExCode = 8
-	u32		PadEx8[15];
+	u32 XmtSize;		// Code = 0 (extended), ExCode = 8
+	u32 PadEx8[15];
 	// ExCode 9 = Receive ring base address
-	u32		RcvBase;		// Code = 0 (extended), ExCode = 9
-	u32		PadEx9[15];
+	u32 RcvBase;		// Code = 0 (extended), ExCode = 9
+	u32 PadEx9[15];
 	// ExCode 10 = Receive ring size
-	u32		RcvSize;		// Code = 0 (extended), ExCode = 10
-	u32		PadEx10[15];
+	u32 RcvSize;		// Code = 0 (extended), ExCode = 10
+	u32 PadEx10[15];
 	// ExCode 11 = Read EEPROM Config
-	u32		Config;			// Code = 0 (extended), ExCode = 11
-	u32		PadEx11[15];
+	u32 Config;		// Code = 0 (extended), ExCode = 11
+	u32 PadEx11[15];
 	// ExCode 12 = Multicast bits 31:0
-	u32		McastLow;		// Code = 0 (extended), ExCode = 12
-	u32		PadEx12[15];
+	u32 McastLow;		// Code = 0 (extended), ExCode = 12
+	u32 PadEx12[15];
 	// ExCode 13 = Multicast bits 63:32
-	u32		McastHigh;		// Code = 0 (extended), ExCode = 13
-	u32		PadEx13[15];
+	u32 McastHigh;		// Code = 0 (extended), ExCode = 13
+	u32 PadEx13[15];
 	// ExCode 14 = Ping
-	u32		Ping;			// Code = 0 (extended), ExCode = 14
-	u32		PadEx14[15];
+	u32 Ping;		// Code = 0 (extended), ExCode = 14
+	u32 PadEx14[15];
 	// ExCode 15 = Link MTU
-	u32		LinkMtu;		// Code = 0 (extended), ExCode = 15
-	u32		PadEx15[15];
+	u32 LinkMtu;		// Code = 0 (extended), ExCode = 15
+	u32 PadEx15[15];
 	// ExCode 16 = Download synchronization
-	u32		LoadSync;		// Code = 0 (extended), ExCode = 16
-	u32		PadEx16[15];
+	u32 LoadSync;		// Code = 0 (extended), ExCode = 16
+	u32 PadEx16[15];
 	// ExCode 17 = Upper DRAM address bits on 32-bit systems
-	u32		Upper;			// Code = 0 (extended), ExCode = 17
-	u32		PadEx17[15];
+	u32 Upper;		// Code = 0 (extended), ExCode = 17
+	u32 PadEx17[15];
 	// ExCode 18 = Slowpath Send Index Address
-	u32		SPSendIndex;		// Code = 0 (extended), ExCode = 18
-	u32		PadEx18[15];
-	u32		RsvdXF;			// Code = 0 (extended), ExCode = 19
-	u32		PadEx19[15];
+	u32 SPSendIndex;	// Code = 0 (extended), ExCode = 18
+	u32 PadEx18[15];
+	u32 RsvdXF;		// Code = 0 (extended), ExCode = 19
+	u32 PadEx19[15];
 	// ExCode 20 = Aggregation
-	u32		Aggregation;		// Code = 0 (extended), ExCode = 20
-	u32		PadEx20[15];
+	u32 Aggregation;	// Code = 0 (extended), ExCode = 20
+	u32 PadEx20[15];
 	// ExCode 21 = Receive MDL push timer
-	u32		PushTicks;		// Code = 0 (extended), ExCode = 21
-	u32		PadEx21[15];
+	u32 PushTicks;		// Code = 0 (extended), ExCode = 21
+	u32 PadEx21[15];
 	// ExCode 22 = TOE NA
-	u32		AckFrequency;		// Code = 0 (extended), ExCode = 22
-	u32		PadEx22[15];
+	u32 AckFrequency;	// Code = 0 (extended), ExCode = 22
+	u32 PadEx22[15];
 	// ExCode 23 = TOE NA
-	u32		RsvdReg23;
-	u32		PadEx23[15];
+	u32 RsvdReg23;
+	u32 PadEx23[15];
 	// ExCode 24 = TOE NA
-	u32		RsvdReg24;
-	u32		PadEx24[15];
+	u32 RsvdReg24;
+	u32 PadEx24[15];
 	// ExCode 25 = TOE NA
-	u32		RsvdReg25;		// Code = 0 (extended), ExCode = 25
-	u32		PadEx25[15];
+	u32 RsvdReg25;		// Code = 0 (extended), ExCode = 25
+	u32 PadEx25[15];
 	// ExCode 26 = Receive checksum requirements
-	u32		ReceiveChecksum;	// Code = 0 (extended), ExCode = 26
-	u32		PadEx26[15];
+	u32 ReceiveChecksum;	// Code = 0 (extended), ExCode = 26
+	u32 PadEx26[15];
 	// ExCode 27 = RSS Requirements
-	u32		Rss;			// Code = 0 (extended), ExCode = 27
-	u32		PadEx27[15];
+	u32 Rss;		// Code = 0 (extended), ExCode = 27
+	u32 PadEx27[15];
 	// ExCode 28 = RSS Table
-	u32		RssTable;		// Code = 0 (extended), ExCode = 28
-	u32		PadEx28[15];
+	u32 RssTable;		// Code = 0 (extended), ExCode = 28
+	u32 PadEx28[15];
 	// ExCode 29 = Event ring release entries
-	u32		EventRelease;		// Code = 0 (extended), ExCode = 29
-	u32		PadEx29[15];
+	u32 EventRelease;	// Code = 0 (extended), ExCode = 29
+	u32 PadEx29[15];
 	// ExCode 30 = Number of receive bufferlist commands on ring 0
-	u32		RcvCmd;			// Code = 0 (extended), ExCode = 30
-	u32		PadEx30[15];
+	u32 RcvCmd;		// Code = 0 (extended), ExCode = 30
+	u32 PadEx30[15];
 	// ExCode 31 = slowpath transmit command - Data[31:0] = 1
-	u32		XmtCmd;			// Code = 0 (extended), ExCode = 31
-	u32		PadEx31[15];
+	u32 XmtCmd;		// Code = 0 (extended), ExCode = 31
+	u32 PadEx31[15];
 	// ExCode 32 = Dump command
-	u32		DumpCmd;		// Code = 0 (extended), ExCode = 32
-	u32		PadEx32[15];
+	u32 DumpCmd;		// Code = 0 (extended), ExCode = 32
+	u32 PadEx32[15];
 	// ExCode 33 = Debug command
-	u32		DebugCmd;		// Code = 0 (extended), ExCode = 33
-	u32		PadEx33[15];
+	u32 DebugCmd;		// Code = 0 (extended), ExCode = 33
+	u32 PadEx33[15];
 	// There are 128 possible extended commands - each of account for 16
 	// words (including the non-relevent base command codes 1-15).
 	// Pad for the remainder of these here to bring us to the next CPU
 	// base.  As extended codes are added, reduce the first array value in
 	// the following field
-	u32		PadToNextCpu[94][16];	// 94 = 128 - 34 (34 = Excodes 0 - 33)
+	u32 PadToNextCpu[94][16];	// 94 = 128 - 34 (34 = Excodes 0 - 33)
 } SXG_UCODE_REGS, *PSXG_UCODE_REGS;
 
 // Interrupt control register (0) values
@@ -141,7 +141,7 @@
 
 // The Microcode supports up to 16 RSS queues
 #define SXG_MAX_RSS				16
-#define SXG_MAX_RSS_TABLE_SIZE	256		// 256-byte max
+#define SXG_MAX_RSS_TABLE_SIZE	256	// 256-byte max
 
 #define SXG_RSS_TCP6				0x00000001	// RSS TCP over IPv6
 #define SXG_RSS_TCP4				0x00000002	// RSS TCP over IPv4
@@ -170,16 +170,16 @@
  * SXG_UCODE_REGS definition above
  */
 typedef struct _SXG_TCB_REGS {
-	u32		ExCode;		/* Extended codes - see SXG_UCODE_REGS */
-	u32		Xmt;		/* Code = 1 - # of Xmt descriptors added to ring */
-	u32		Rcv;		/* Code = 2 - # of Rcv descriptors added to ring */
-	u32		Rsvd1;		/* Code = 3 - TOE NA */
-	u32		Rsvd2;		/* Code = 4 - TOE NA */
-	u32		Rsvd3;		/* Code = 5 - TOE NA */
-	u32		Invalid;	/* Code = 6 - Reserved for "CardUp" see above */
-	u32		Rsvd4;		/* Code = 7 - TOE NA */
-	u32		Rsvd5;		/* Code = 8 - TOE NA */
-	u32		Pad[7];		/* Codes 8-15 - Not used. */
+	u32 ExCode;		/* Extended codes - see SXG_UCODE_REGS */
+	u32 Xmt;		/* Code = 1 - # of Xmt descriptors added to ring */
+	u32 Rcv;		/* Code = 2 - # of Rcv descriptors added to ring */
+	u32 Rsvd1;		/* Code = 3 - TOE NA */
+	u32 Rsvd2;		/* Code = 4 - TOE NA */
+	u32 Rsvd3;		/* Code = 5 - TOE NA */
+	u32 Invalid;		/* Code = 6 - Reserved for "CardUp" see above */
+	u32 Rsvd4;		/* Code = 7 - TOE NA */
+	u32 Rsvd5;		/* Code = 8 - TOE NA */
+	u32 Pad[7];		/* Codes 8-15 - Not used. */
 } SXG_TCB_REGS, *PSXG_TCB_REGS;
 
 /***************************************************************************
@@ -273,27 +273,27 @@
  */
 #pragma pack(push, 1)
 typedef struct _SXG_EVENT {
-	u32			Pad[1];		// not used
-	u32			SndUna;		// SndUna value
-	u32			Resid;		// receive MDL resid
+	u32 Pad[1];		// not used
+	u32 SndUna;		// SndUna value
+	u32 Resid;		// receive MDL resid
 	union {
-		void *		HostHandle;	// Receive host handle
-		u32		Rsvd1;		// TOE NA
+		void *HostHandle;	// Receive host handle
+		u32 Rsvd1;	// TOE NA
 		struct {
-			u32	NotUsed;
-			u32	Rsvd2;		// TOE NA
+			u32 NotUsed;
+			u32 Rsvd2;	// TOE NA
 		} Flush;
 	};
-	u32			Toeplitz;	// RSS Toeplitz hash
+	u32 Toeplitz;		// RSS Toeplitz hash
 	union {
-		ushort		Rsvd3;		// TOE NA
-		ushort		HdrOffset;	// Slowpath
+		ushort Rsvd3;	// TOE NA
+		ushort HdrOffset;	// Slowpath
 	};
-	ushort			Length;		//
-	unsigned char 		Rsvd4;		// TOE NA
-	unsigned char 		Code;		// Event code
-	unsigned char		CommandIndex;	// New ring index
-	unsigned char		Status;		// Event status
+	ushort Length;		//
+	unsigned char Rsvd4;	// TOE NA
+	unsigned char Code;	// Event code
+	unsigned char CommandIndex;	// New ring index
+	unsigned char Status;	// Event status
 } SXG_EVENT, *PSXG_EVENT;
 #pragma pack(pop)
 
@@ -318,12 +318,12 @@
 // Event ring
 // Size must be power of 2, between 128 and 16k
 #define EVENT_RING_SIZE		4096	// ??
-#define EVENT_RING_BATCH	16		// Hand entries back 16 at a time.
-#define EVENT_BATCH_LIMIT	256	    // Stop processing events after 256 (16 * 16)
+#define EVENT_RING_BATCH	16	// Hand entries back 16 at a time.
+#define EVENT_BATCH_LIMIT	256	// Stop processing events after 256 (16 * 16)
 
 typedef struct _SXG_EVENT_RING {
-	SXG_EVENT	Ring[EVENT_RING_SIZE];
-}SXG_EVENT_RING, *PSXG_EVENT_RING;
+	SXG_EVENT Ring[EVENT_RING_SIZE];
+} SXG_EVENT_RING, *PSXG_EVENT_RING;
 
 /***************************************************************************
  *
@@ -341,7 +341,7 @@
 #define SXG_TCB_PER_BUCKET		16
 #define SXG_TCB_BUCKET_MASK		0xFF0	// Bucket portion of TCB ID
 #define SXG_TCB_ELEMENT_MASK	0x00F	// Element within bucket
-#define SXG_TCB_BUCKETS			256		// 256 * 16 = 4k
+#define SXG_TCB_BUCKETS			256	// 256 * 16 = 4k
 
 #define SXG_TCB_BUFFER_SIZE	512	// ASSERT format is correct
 
@@ -368,7 +368,6 @@
 	&(_TcpObject)->CompBuffer->Frame.HasVlan.TcpIp6.Ip				:		\
 	&(_TcpObject)->CompBuffer->Frame.NoVlan.TcpIp6.Ip
 
-
 #if DBG
 // Horrible kludge to distinguish dumb-nic, slowpath, and
 // fastpath traffic.  Decrement the HopLimit by one
@@ -396,16 +395,16 @@
  * Receive and transmit rings
  ***************************************************************************/
 #define SXG_MAX_RING_SIZE	256
-#define SXG_XMT_RING_SIZE	128		// Start with 128
-#define SXG_RCV_RING_SIZE	128		// Start with 128
+#define SXG_XMT_RING_SIZE	128	// Start with 128
+#define SXG_RCV_RING_SIZE	128	// Start with 128
 #define SXG_MAX_ENTRIES     4096
 
 // Structure and macros to manage a ring
 typedef struct _SXG_RING_INFO {
-	unsigned char			Head;		// Where we add entries - Note unsigned char:RING_SIZE
-	unsigned char			Tail;		// Where we pull off completed entries
-	ushort			Size;		// Ring size - Must be multiple of 2
-	void *			Context[SXG_MAX_RING_SIZE];	// Shadow ring
+	unsigned char Head;	// Where we add entries - Note unsigned char:RING_SIZE
+	unsigned char Tail;	// Where we pull off completed entries
+	ushort Size;		// Ring size - Must be multiple of 2
+	void *Context[SXG_MAX_RING_SIZE];	// Shadow ring
 } SXG_RING_INFO, *PSXG_RING_INFO;
 
 #define SXG_INITIALIZE_RING(_ring, _size) {							\
@@ -483,40 +482,40 @@
  */
 #pragma pack(push, 1)
 typedef struct _SXG_CMD {
-	dma_addr_t             			Sgl;			// Physical address of SGL
+	dma_addr_t Sgl;		// Physical address of SGL
 	union {
 		struct {
-			dma64_addr_t          	FirstSgeAddress;// Address of first SGE
-			u32					FirstSgeLength;	// Length of first SGE
+			dma64_addr_t FirstSgeAddress;	// Address of first SGE
+			u32 FirstSgeLength;	// Length of first SGE
 			union {
-				u32				Rsvd1;	        // TOE NA
-				u32				SgeOffset;		// Slowpath - 2nd SGE offset
-				u32				Resid;			// MDL completion - clobbers update
+				u32 Rsvd1;	// TOE NA
+				u32 SgeOffset;	// Slowpath - 2nd SGE offset
+				u32 Resid;	// MDL completion - clobbers update
 			};
 			union {
-				u32				TotalLength;	// Total transfer length
-				u32				Mss;			// LSO MSS
+				u32 TotalLength;	// Total transfer length
+				u32 Mss;	// LSO MSS
 			};
 		} Buffer;
 	};
 	union {
 		struct {
-			unsigned char					Flags:4;		// slowpath flags
-			unsigned char					IpHl:4;			// Ip header length (>>2)
-			unsigned char					MacLen;			// Mac header len
+			unsigned char Flags:4;	// slowpath flags
+			unsigned char IpHl:4;	// Ip header length (>>2)
+			unsigned char MacLen;	// Mac header len
 		} CsumFlags;
 		struct {
-			ushort					Flags:4;		// slowpath flags
-			ushort					TcpHdrOff:7;	// TCP
-			ushort					MacLen:5;		// Mac header len
+			ushort Flags:4;	// slowpath flags
+			ushort TcpHdrOff:7;	// TCP
+			ushort MacLen:5;	// Mac header len
 		} LsoFlags;
-		ushort						Flags;			// flags
+		ushort Flags;	// flags
 	};
 	union {
-		ushort						SgEntries;		// SG entry count including first sge
+		ushort SgEntries;	// SG entry count including first sge
 		struct {
-			unsigned char					Status;		    // Copied from event status
-			unsigned char					NotUsed;
+			unsigned char Status;	// Copied from event status
+			unsigned char NotUsed;
 		} Status;
 	};
 } SXG_CMD, *PSXG_CMD;
@@ -524,8 +523,8 @@
 
 #pragma pack(push, 1)
 typedef struct _VLAN_HDR {
-	ushort	VlanTci;
-	ushort	VlanTpid;
+	ushort VlanTci;
+	ushort VlanTpid;
 } VLAN_HDR, *PVLAN_HDR;
 #pragma pack(pop)
 
@@ -561,16 +560,16 @@
  *
  */
 // Slowpath CMD flags
-#define SXG_SLOWCMD_CSUM_IP			0x01		// Checksum IP
-#define SXG_SLOWCMD_CSUM_TCP		0x02		// Checksum TCP
-#define SXG_SLOWCMD_LSO				0x04		// Large segment send
+#define SXG_SLOWCMD_CSUM_IP			0x01	// Checksum IP
+#define SXG_SLOWCMD_CSUM_TCP		0x02	// Checksum TCP
+#define SXG_SLOWCMD_LSO				0x04	// Large segment send
 
 typedef struct _SXG_XMT_RING {
-	SXG_CMD		Descriptors[SXG_XMT_RING_SIZE];
+	SXG_CMD Descriptors[SXG_XMT_RING_SIZE];
 } SXG_XMT_RING, *PSXG_XMT_RING;
 
 typedef struct _SXG_RCV_RING {
-	SXG_CMD		Descriptors[SXG_RCV_RING_SIZE];
+	SXG_CMD Descriptors[SXG_RCV_RING_SIZE];
 } SXG_RCV_RING, *PSXG_RCV_RING;
 
 /***************************************************************************
@@ -578,8 +577,8 @@
  * shared memory allocation
  ***************************************************************************/
 typedef enum {
-	SXG_BUFFER_TYPE_RCV,		// Receive buffer
-	SXG_BUFFER_TYPE_SGL			// SGL buffer
+	SXG_BUFFER_TYPE_RCV,	// Receive buffer
+	SXG_BUFFER_TYPE_SGL	// SGL buffer
 } SXG_BUFFER_TYPE;
 
 // State for SXG buffers
@@ -668,60 +667,60 @@
 #define SXG_RCV_DATA_BUFFERS			4096	// Amount to give to the card
 #define SXG_INITIAL_RCV_DATA_BUFFERS	8192	// Initial pool of buffers
 #define SXG_MIN_RCV_DATA_BUFFERS		2048	// Minimum amount and when to get more
-#define SXG_MAX_RCV_BLOCKS				128		// = 16384 receive buffers
+#define SXG_MAX_RCV_BLOCKS				128	// = 16384 receive buffers
 
 // Receive buffer header
 typedef struct _SXG_RCV_DATA_BUFFER_HDR {
-	dma_addr_t          			PhysicalAddress;	// Buffer physical address
+	dma_addr_t PhysicalAddress;	// Buffer physical address
 	// Note - DO NOT USE the VirtualAddress field to locate data.
 	// Use the sxg.h:SXG_RECEIVE_DATA_LOCATION macro instead.
-	void *VirtualAddress;		// Start of buffer
-	LIST_ENTRY						FreeList;			// Free queue of buffers
-	struct _SXG_RCV_DATA_BUFFER_HDR	*Next;				// Fastpath data buffer queue
-	u32							Size;				// Buffer size
-	u32							ByteOffset;			// See SXG_RESTORE_MDL_OFFSET
-	unsigned char							State;				// See SXG_BUFFER state above
-	unsigned char							Status;				// Event status (to log PUSH)
-	struct sk_buff                * skb;				// Double mapped (nbl and pkt)
+	void *VirtualAddress;	// Start of buffer
+	LIST_ENTRY FreeList;	// Free queue of buffers
+	struct _SXG_RCV_DATA_BUFFER_HDR *Next;	// Fastpath data buffer queue
+	u32 Size;		// Buffer size
+	u32 ByteOffset;		// See SXG_RESTORE_MDL_OFFSET
+	unsigned char State;	// See SXG_BUFFER state above
+	unsigned char Status;	// Event status (to log PUSH)
+	struct sk_buff *skb;	// Double mapped (nbl and pkt)
 } SXG_RCV_DATA_BUFFER_HDR, *PSXG_RCV_DATA_BUFFER_HDR;
 
 // SxgSlowReceive uses the PACKET (skb) contained
 // in the SXG_RCV_DATA_BUFFER_HDR when indicating dumb-nic data
 #define SxgDumbRcvPacket	        skb
 
-#define SXG_RCV_DATA_HDR_SIZE			256		// Space for SXG_RCV_DATA_BUFFER_HDR
+#define SXG_RCV_DATA_HDR_SIZE			256	// Space for SXG_RCV_DATA_BUFFER_HDR
 #define SXG_RCV_DATA_BUFFER_SIZE		2048	// Non jumbo = 2k including HDR
 #define SXG_RCV_JUMBO_BUFFER_SIZE		10240	// jumbo = 10k including HDR
 
 // Receive data descriptor
 typedef struct _SXG_RCV_DATA_DESCRIPTOR {
 	union {
-		struct sk_buff    *	VirtualAddress;			// Host handle
-		u64 			ForceTo8Bytes;			// Force x86 to 8-byte boundary
+		struct sk_buff *VirtualAddress;	// Host handle
+		u64 ForceTo8Bytes;	// Force x86 to 8-byte boundary
 	};
-	dma_addr_t             	PhysicalAddress;
+	dma_addr_t PhysicalAddress;
 } SXG_RCV_DATA_DESCRIPTOR, *PSXG_RCV_DATA_DESCRIPTOR;
 
 // Receive descriptor block
 #define SXG_RCV_DESCRIPTORS_PER_BLOCK		128
 #define SXG_RCV_DESCRIPTOR_BLOCK_SIZE		2048	// For sanity check
 typedef struct _SXG_RCV_DESCRIPTOR_BLOCK {
-	SXG_RCV_DATA_DESCRIPTOR		Descriptors[SXG_RCV_DESCRIPTORS_PER_BLOCK];
+	SXG_RCV_DATA_DESCRIPTOR Descriptors[SXG_RCV_DESCRIPTORS_PER_BLOCK];
 } SXG_RCV_DESCRIPTOR_BLOCK, *PSXG_RCV_DESCRIPTOR_BLOCK;
 
 // Receive descriptor block header
 typedef struct _SXG_RCV_DESCRIPTOR_BLOCK_HDR {
-	void *					VirtualAddress;			// Start of 2k buffer
-	dma_addr_t	            PhysicalAddress;		// ..and it's physical address
-	LIST_ENTRY				FreeList;				// Free queue of descriptor blocks
-	unsigned char					State;					// See SXG_BUFFER state above
+	void *VirtualAddress;	// Start of 2k buffer
+	dma_addr_t PhysicalAddress;	// ..and it's physical address
+	LIST_ENTRY FreeList;	// Free queue of descriptor blocks
+	unsigned char State;	// See SXG_BUFFER state above
 } SXG_RCV_DESCRIPTOR_BLOCK_HDR, *PSXG_RCV_DESCRIPTOR_BLOCK_HDR;
 
 // Receive block header
 typedef struct _SXG_RCV_BLOCK_HDR {
-	void *					VirtualAddress;			// Start of virtual memory
-	dma_addr_t	            PhysicalAddress;		// ..and it's physical address
-	LIST_ENTRY				AllList;				// Queue of all SXG_RCV_BLOCKS
+	void *VirtualAddress;	// Start of virtual memory
+	dma_addr_t PhysicalAddress;	// ..and it's physical address
+	LIST_ENTRY AllList;	// Queue of all SXG_RCV_BLOCKS
 } SXG_RCV_BLOCK_HDR, *PSXG_RCV_BLOCK_HDR;
 
 // Macros to determine data structure offsets into receive block
@@ -747,8 +746,8 @@
 // Use the miniport reserved portion of the NBL to locate
 // our SXG_RCV_DATA_BUFFER_HDR structure.
 typedef struct _SXG_RCV_NBL_RESERVED {
-	PSXG_RCV_DATA_BUFFER_HDR	RcvDataBufferHdr;
-	void *						Available;
+	PSXG_RCV_DATA_BUFFER_HDR RcvDataBufferHdr;
+	void *Available;
 } SXG_RCV_NBL_RESERVED, *PSXG_RCV_NBL_RESERVED;
 
 #define SXG_RCV_NBL_BUFFER_HDR(_NBL) (((PSXG_RCV_NBL_RESERVED)NET_BUFFER_LIST_MINIPORT_RESERVED(_NBL))->RcvDataBufferHdr)
@@ -760,12 +759,11 @@
 #define SXG_MIN_SGL_BUFFERS			2048	// Minimum amount and when to get more
 #define SXG_MAX_SGL_BUFFERS			16384	// Maximum to allocate (note ADAPT:ushort)
 
-
 // Self identifying structure type
 typedef enum _SXG_SGL_TYPE {
-	SXG_SGL_DUMB,				// Dumb NIC SGL
-	SXG_SGL_SLOW,				// Slowpath protocol header - see below
-	SXG_SGL_CHIMNEY				// Chimney offload SGL
+	SXG_SGL_DUMB,		// Dumb NIC SGL
+	SXG_SGL_SLOW,		// Slowpath protocol header - see below
+	SXG_SGL_CHIMNEY		// Chimney offload SGL
 } SXG_SGL_TYPE, PSXG_SGL_TYPE;
 
 // Note - the description below is Microsoft specific
@@ -774,14 +772,14 @@
 // for the SCATTER_GATHER_LIST portion of the SXG_SCATTER_GATHER data structure.
 // The following considerations apply when setting this value:
 // - First, the Sahara card is designed to read the Microsoft SGL structure
-// 	 straight out of host memory.  This means that the SGL must reside in
-//	 shared memory.  If the length here is smaller than the SGL for the
-//	 NET_BUFFER, then NDIS will allocate its own buffer.  The buffer
-//	 that NDIS allocates is not in shared memory, so when this happens,
-//	 the SGL will need to be copied to a set of SXG_SCATTER_GATHER buffers.
-//	 In other words.. we don't want this value to be too small.
+//       straight out of host memory.  This means that the SGL must reside in
+//       shared memory.  If the length here is smaller than the SGL for the
+//       NET_BUFFER, then NDIS will allocate its own buffer.  The buffer
+//       that NDIS allocates is not in shared memory, so when this happens,
+//       the SGL will need to be copied to a set of SXG_SCATTER_GATHER buffers.
+//       In other words.. we don't want this value to be too small.
 // - On the other hand.. we're allocating up to 16k of these things.  If
-//	 we make this too big, we start to consume a ton of memory..
+//       we make this too big, we start to consume a ton of memory..
 // At the moment, I'm going to limit the number of SG entries to 150.
 // If each entry maps roughly 4k, then this should cover roughly 600kB
 // NET_BUFFERs.  Furthermore, since each entry is 24 bytes, the total
@@ -801,24 +799,23 @@
 // the SGL.  The following structure defines an x64
 // formatted SGL entry
 typedef struct _SXG_X64_SGE {
-    dma64_addr_t      	Address;	// same as wdm.h
-    u32				Length;		// same as wdm.h
-	u32				CompilerPad;// The compiler pads to 8-bytes
-    u64 			Reserved;	// u32 * in wdm.h.  Force to 8 bytes
+	dma64_addr_t Address;	// same as wdm.h
+	u32 Length;		// same as wdm.h
+	u32 CompilerPad;	// The compiler pads to 8-bytes
+	u64 Reserved;		// u32 * in wdm.h.  Force to 8 bytes
 } SXG_X64_SGE, *PSXG_X64_SGE;
 
 typedef struct _SCATTER_GATHER_ELEMENT {
-    dma64_addr_t      	Address;	// same as wdm.h
-    u32				Length;		// same as wdm.h
-	u32				CompilerPad;// The compiler pads to 8-bytes
-    u64 			Reserved;	// u32 * in wdm.h.  Force to 8 bytes
+	dma64_addr_t Address;	// same as wdm.h
+	u32 Length;		// same as wdm.h
+	u32 CompilerPad;	// The compiler pads to 8-bytes
+	u64 Reserved;		// u32 * in wdm.h.  Force to 8 bytes
 } SCATTER_GATHER_ELEMENT, *PSCATTER_GATHER_ELEMENT;
 
-
 typedef struct _SCATTER_GATHER_LIST {
-    u32					NumberOfElements;
-    u32 *				Reserved;
-    SCATTER_GATHER_ELEMENT	Elements[];
+	u32 NumberOfElements;
+	u32 *Reserved;
+	SCATTER_GATHER_ELEMENT Elements[];
 } SCATTER_GATHER_LIST, *PSCATTER_GATHER_LIST;
 
 // The card doesn't care about anything except elements, so
@@ -826,26 +823,26 @@
 // SGL structure.  But redefine from wdm.h:SCATTER_GATHER_LIST so
 // we can specify SXG_X64_SGE and define a fixed number of elements
 typedef struct _SXG_X64_SGL {
-    u32					NumberOfElements;
-    u32 *				Reserved;
-    SXG_X64_SGE				Elements[SXG_SGL_ENTRIES];
+	u32 NumberOfElements;
+	u32 *Reserved;
+	SXG_X64_SGE Elements[SXG_SGL_ENTRIES];
 } SXG_X64_SGL, *PSXG_X64_SGL;
 
 typedef struct _SXG_SCATTER_GATHER {
-	SXG_SGL_TYPE						Type;			// FIRST! Dumb-nic or offload
-	void *   							adapter;		// Back pointer to adapter
-	LIST_ENTRY							FreeList;		// Free SXG_SCATTER_GATHER blocks
-	LIST_ENTRY							AllList;		// All SXG_SCATTER_GATHER blocks
-	dma_addr_t				            PhysicalAddress;// physical address
-	unsigned char								State;			// See SXG_BUFFER state above
-	unsigned char								CmdIndex;		// Command ring index
-	struct sk_buff                    *	DumbPacket;		// Associated Packet
-	u32								Direction;		// For asynchronous completions
-	u32								CurOffset;		// Current SGL offset
-	u32								SglRef;			// SGL reference count
-	VLAN_HDR							VlanTag;		// VLAN tag to be inserted into SGL
-	PSCATTER_GATHER_LIST   				pSgl;			// SGL Addr. Possibly &Sgl
-	SXG_X64_SGL							Sgl;			// SGL handed to card
+	SXG_SGL_TYPE Type;	// FIRST! Dumb-nic or offload
+	void *adapter;		// Back pointer to adapter
+	LIST_ENTRY FreeList;	// Free SXG_SCATTER_GATHER blocks
+	LIST_ENTRY AllList;	// All SXG_SCATTER_GATHER blocks
+	dma_addr_t PhysicalAddress;	// physical address
+	unsigned char State;	// See SXG_BUFFER state above
+	unsigned char CmdIndex;	// Command ring index
+	struct sk_buff *DumbPacket;	// Associated Packet
+	u32 Direction;		// For asynchronous completions
+	u32 CurOffset;		// Current SGL offset
+	u32 SglRef;		// SGL reference count
+	VLAN_HDR VlanTag;	// VLAN tag to be inserted into SGL
+	PSCATTER_GATHER_LIST pSgl;	// SGL Addr. Possibly &Sgl
+	SXG_X64_SGL Sgl;	// SGL handed to card
 } SXG_SCATTER_GATHER, *PSXG_SCATTER_GATHER;
 
 #if defined(CONFIG_X86_64)
@@ -856,6 +853,5 @@
 #define SXG_SGL_BUFFER(_SxgSgl)		NULL
 #define SXG_SGL_BUF_SIZE			0
 #else
-    Stop Compilation;
+Stop Compilation;
 #endif
-
diff --git a/drivers/staging/sxg/sxghw.h b/drivers/staging/sxg/sxghw.h
index 8f4f6ef..2222ae9 100644
--- a/drivers/staging/sxg/sxghw.h
+++ b/drivers/staging/sxg/sxghw.h
@@ -13,11 +13,11 @@
 /*******************************************************************************
  * Configuration space
  *******************************************************************************/
-//  PCI Vendor ID
-#define SXG_VENDOR_ID			0x139A	// Alacritech's Vendor ID
+/*  PCI Vendor ID */
+#define SXG_VENDOR_ID			0x139A	/* Alacritech's Vendor ID */
 
 //  PCI Device ID
-#define SXG_DEVICE_ID			0x0009	// Sahara Device ID
+#define SXG_DEVICE_ID			0x0009	/* Sahara Device ID */
 
 //
 // Subsystem IDs.
@@ -141,7 +141,7 @@
 #define SXG_REGISTER_SIZE_PER_CPU	0x00002000	// Used to sanity check UCODE_REGS structure
 
 // Sahara receive sequencer status values
-#define SXG_RCV_STATUS_ATTN					0x80000000	// Attention
+#define SXG_RCV_STATUS_ATTN			0x80000000	// Attention
 #define SXG_RCV_STATUS_TRANSPORT_MASK		0x3F000000	// Transport mask
 #define SXG_RCV_STATUS_TRANSPORT_ERROR		0x20000000	// Transport error
 #define SXG_RCV_STATUS_TRANSPORT_CSUM		0x23000000	// Transport cksum error
@@ -156,9 +156,9 @@
 #define SXG_RCV_STATUS_TRANSPORT_FTP		0x03000000	// Transport FTP
 #define SXG_RCV_STATUS_TRANSPORT_HTTP		0x02000000	// Transport HTTP
 #define SXG_RCV_STATUS_TRANSPORT_SMB		0x01000000	// Transport SMB
-#define SXG_RCV_STATUS_NETWORK_MASK			0x00FF0000	// Network mask
+#define SXG_RCV_STATUS_NETWORK_MASK		0x00FF0000	// Network mask
 #define SXG_RCV_STATUS_NETWORK_ERROR		0x00800000	// Network error
-#define SXG_RCV_STATUS_NETWORK_CSUM			0x00830000	// Network cksum error
+#define SXG_RCV_STATUS_NETWORK_CSUM		0x00830000	// Network cksum error
 #define SXG_RCV_STATUS_NETWORK_UFLOW		0x00820000	// Network underflow error
 #define SXG_RCV_STATUS_NETWORK_HDRLEN		0x00800000	// Network header length
 #define SXG_RCV_STATUS_NETWORK_OFLOW		0x00400000	// Network overflow detected
@@ -167,67 +167,67 @@
 #define SXG_RCV_STATUS_NETWORK_OFFSET		0x00080000	// Network offset detected
 #define SXG_RCV_STATUS_NETWORK_FRAGMENT		0x00040000	// Network fragment detected
 #define SXG_RCV_STATUS_NETWORK_TRANS_MASK	0x00030000	// Network transport type mask
-#define SXG_RCV_STATUS_NETWORK_UDP			0x00020000	// UDP
-#define SXG_RCV_STATUS_NETWORK_TCP			0x00010000	// TCP
-#define SXG_RCV_STATUS_IPONLY				0x00008000	// IP-only not TCP
-#define SXG_RCV_STATUS_PKT_PRI				0x00006000	// Receive priority
-#define SXG_RCV_STATUS_PKT_PRI_SHFT					13	// Receive priority shift
-#define SXG_RCV_STATUS_PARITY				0x00001000	// MAC Receive RAM parity error
-#define SXG_RCV_STATUS_ADDRESS_MASK			0x00000F00	// Link address detection mask
-#define SXG_RCV_STATUS_ADDRESS_D			0x00000B00	// Link address D
-#define SXG_RCV_STATUS_ADDRESS_C			0x00000A00	// Link address C
-#define SXG_RCV_STATUS_ADDRESS_B			0x00000900	// Link address B
-#define SXG_RCV_STATUS_ADDRESS_A			0x00000800	// Link address A
+#define SXG_RCV_STATUS_NETWORK_UDP		0x00020000	// UDP
+#define SXG_RCV_STATUS_NETWORK_TCP		0x00010000	// TCP
+#define SXG_RCV_STATUS_IPONLY			0x00008000	// IP-only not TCP
+#define SXG_RCV_STATUS_PKT_PRI			0x00006000	// Receive priority
+#define SXG_RCV_STATUS_PKT_PRI_SHFT			13	// Receive priority shift
+#define SXG_RCV_STATUS_PARITY			0x00001000	// MAC Receive RAM parity error
+#define SXG_RCV_STATUS_ADDRESS_MASK		0x00000F00	// Link address detection mask
+#define SXG_RCV_STATUS_ADDRESS_D		0x00000B00	// Link address D
+#define SXG_RCV_STATUS_ADDRESS_C		0x00000A00	// Link address C
+#define SXG_RCV_STATUS_ADDRESS_B		0x00000900	// Link address B
+#define SXG_RCV_STATUS_ADDRESS_A		0x00000800	// Link address A
 #define SXG_RCV_STATUS_ADDRESS_BCAST		0x00000300	// Link address broadcast
 #define SXG_RCV_STATUS_ADDRESS_MCAST		0x00000200	// Link address multicast
 #define SXG_RCV_STATUS_ADDRESS_CMCAST		0x00000100	// Link control multicast
-#define SXG_RCV_STATUS_LINK_MASK			0x000000FF	// Link status mask
-#define SXG_RCV_STATUS_LINK_ERROR			0x00000080	// Link error
-#define SXG_RCV_STATUS_LINK_MASK			0x000000FF	// Link status mask
-#define SXG_RCV_STATUS_LINK_PARITY			0x00000087	// RcvMacQ parity error
-#define SXG_RCV_STATUS_LINK_EARLY			0x00000086	// Data early
+#define SXG_RCV_STATUS_LINK_MASK		0x000000FF	// Link status mask
+#define SXG_RCV_STATUS_LINK_ERROR		0x00000080	// Link error
+#define SXG_RCV_STATUS_LINK_MASK		0x000000FF	// Link status mask
+#define SXG_RCV_STATUS_LINK_PARITY		0x00000087	// RcvMacQ parity error
+#define SXG_RCV_STATUS_LINK_EARLY		0x00000086	// Data early
 #define SXG_RCV_STATUS_LINK_BUFOFLOW		0x00000085	// Buffer overflow
-#define SXG_RCV_STATUS_LINK_CODE			0x00000084	// Link code error
-#define SXG_RCV_STATUS_LINK_DRIBBLE			0x00000083	// Dribble nibble
-#define SXG_RCV_STATUS_LINK_CRC				0x00000082	// CRC error
-#define SXG_RCV_STATUS_LINK_OFLOW			0x00000081	// Link overflow
-#define SXG_RCV_STATUS_LINK_UFLOW			0x00000080	// Link underflow
-#define SXG_RCV_STATUS_LINK_8023			0x00000020	// 802.3
-#define SXG_RCV_STATUS_LINK_SNAP			0x00000010	// Snap
-#define SXG_RCV_STATUS_LINK_VLAN			0x00000008	// VLAN
+#define SXG_RCV_STATUS_LINK_CODE		0x00000084	// Link code error
+#define SXG_RCV_STATUS_LINK_DRIBBLE		0x00000083	// Dribble nibble
+#define SXG_RCV_STATUS_LINK_CRC			0x00000082	// CRC error
+#define SXG_RCV_STATUS_LINK_OFLOW		0x00000081	// Link overflow
+#define SXG_RCV_STATUS_LINK_UFLOW		0x00000080	// Link underflow
+#define SXG_RCV_STATUS_LINK_8023		0x00000020	// 802.3
+#define SXG_RCV_STATUS_LINK_SNAP		0x00000010	// Snap
+#define SXG_RCV_STATUS_LINK_VLAN		0x00000008	// VLAN
 #define SXG_RCV_STATUS_LINK_TYPE_MASK		0x00000007	// Network type mask
-#define SXG_RCV_STATUS_LINK_CONTROL			0x00000003	// Control packet
-#define SXG_RCV_STATUS_LINK_IPV6			0x00000002	// IPv6 packet
-#define SXG_RCV_STATUS_LINK_IPV4			0x00000001	// IPv4 packet
+#define SXG_RCV_STATUS_LINK_CONTROL		0x00000003	// Control packet
+#define SXG_RCV_STATUS_LINK_IPV6		0x00000002	// IPv6 packet
+#define SXG_RCV_STATUS_LINK_IPV4		0x00000001	// IPv4 packet
 
 /***************************************************************************
  * Sahara receive and transmit configuration registers
  ***************************************************************************/
-#define	RCV_CONFIG_RESET			0x80000000	// RcvConfig register reset
-#define	RCV_CONFIG_ENABLE			0x40000000	// Enable the receive logic
-#define	RCV_CONFIG_ENPARSE			0x20000000	// Enable the receive parser
-#define	RCV_CONFIG_SOCKET			0x10000000	// Enable the socket detector
-#define	RCV_CONFIG_RCVBAD			0x08000000	// Receive all bad frames
-#define	RCV_CONFIG_CONTROL			0x04000000	// Receive all control frames
-#define	RCV_CONFIG_RCVPAUSE			0x02000000	// Enable pause transmit when attn
-#define	RCV_CONFIG_TZIPV6			0x01000000	// Include TCP port w/ IPv6 toeplitz
-#define	RCV_CONFIG_TZIPV4			0x00800000	// Include TCP port w/ IPv4 toeplitz
-#define	RCV_CONFIG_FLUSH			0x00400000	// Flush buffers
+#define	RCV_CONFIG_RESET		0x80000000	// RcvConfig register reset
+#define	RCV_CONFIG_ENABLE		0x40000000	// Enable the receive logic
+#define	RCV_CONFIG_ENPARSE		0x20000000	// Enable the receive parser
+#define	RCV_CONFIG_SOCKET		0x10000000	// Enable the socket detector
+#define	RCV_CONFIG_RCVBAD		0x08000000	// Receive all bad frames
+#define	RCV_CONFIG_CONTROL		0x04000000	// Receive all control frames
+#define	RCV_CONFIG_RCVPAUSE		0x02000000	// Enable pause transmit when attn
+#define	RCV_CONFIG_TZIPV6		0x01000000	// Include TCP port w/ IPv6 toeplitz
+#define	RCV_CONFIG_TZIPV4		0x00800000	// Include TCP port w/ IPv4 toeplitz
+#define	RCV_CONFIG_FLUSH		0x00400000	// Flush buffers
 #define	RCV_CONFIG_PRIORITY_MASK	0x00300000	// Priority level
 #define	RCV_CONFIG_HASH_MASK		0x00030000	// Hash depth
-#define	RCV_CONFIG_HASH_8			0x00000000	// Hash depth 8
-#define	RCV_CONFIG_HASH_16			0x00010000	// Hash depth 16
-#define	RCV_CONFIG_HASH_4			0x00020000	// Hash depth 4
-#define	RCV_CONFIG_HASH_2			0x00030000	// Hash depth 2
+#define	RCV_CONFIG_HASH_8		0x00000000	// Hash depth 8
+#define	RCV_CONFIG_HASH_16		0x00010000	// Hash depth 16
+#define	RCV_CONFIG_HASH_4		0x00020000	// Hash depth 4
+#define	RCV_CONFIG_HASH_2		0x00030000	// Hash depth 2
 #define	RCV_CONFIG_BUFLEN_MASK		0x0000FFF0	// Buffer length bits 15:4. ie multiple of 16.
-#define RCV_CONFIG_SKT_DIS			0x00000008	// Disable socket detection on attn
+#define RCV_CONFIG_SKT_DIS		0x00000008	// Disable socket detection on attn
 // Macro to determine RCV_CONFIG_BUFLEN based on maximum frame size.
 // We add 18 bytes for Sahara receive status and padding, plus 4 bytes for CRC,
 // and round up to nearest 16 byte boundary
 #define RCV_CONFIG_BUFSIZE(_MaxFrame) ((((_MaxFrame) + 22) + 15) & RCV_CONFIG_BUFLEN_MASK)
 
-#define	XMT_CONFIG_RESET			0x80000000	// XmtConfig register reset
-#define	XMT_CONFIG_ENABLE			0x40000000	// Enable transmit logic
+#define	XMT_CONFIG_RESET		0x80000000	// XmtConfig register reset
+#define	XMT_CONFIG_ENABLE		0x40000000	// Enable transmit logic
 #define	XMT_CONFIG_MAC_PARITY		0x20000000	// Inhibit MAC RAM parity error
 #define	XMT_CONFIG_BUF_PARITY		0x10000000	// Inhibit D2F buffer parity error
 #define	XMT_CONFIG_MEM_PARITY		0x08000000	// Inhibit 1T SRAM parity error
@@ -249,9 +249,9 @@
 
 // A-XGMAC Configuration Register 1
 #define AXGMAC_CFG1_XMT_PAUSE		0x80000000		// Allow the sending of Pause frames
-#define AXGMAC_CFG1_XMT_EN			0x40000000		// Enable transmit
+#define AXGMAC_CFG1_XMT_EN		0x40000000		// Enable transmit
 #define AXGMAC_CFG1_RCV_PAUSE		0x20000000		// Allow the detection of Pause frames
-#define AXGMAC_CFG1_RCV_EN			0x10000000		// Enable receive
+#define AXGMAC_CFG1_RCV_EN		0x10000000		// Enable receive
 #define AXGMAC_CFG1_XMT_STATE		0x04000000		// Current transmit state - READ ONLY
 #define AXGMAC_CFG1_RCV_STATE		0x01000000		// Current receive state - READ ONLY
 #define AXGMAC_CFG1_XOFF_SHORT		0x00001000		// Only pause for 64 slot on XOFF
@@ -262,24 +262,24 @@
 #define AXGMAC_CFG1_RCV_FCS2		0x00000200		// Delay receive FCS 2 4-byte words
 #define AXGMAC_CFG1_RCV_FCS3		0x00000300		// Delay receive FCS 3 4-byte words
 #define AXGMAC_CFG1_PKT_OVERRIDE	0x00000080		// Per-packet override enable
-#define AXGMAC_CFG1_SWAP			0x00000040		// Byte swap enable
+#define AXGMAC_CFG1_SWAP		0x00000040		// Byte swap enable
 #define AXGMAC_CFG1_SHORT_ASSERT	0x00000020		// ASSERT srdrpfrm on short frame (<64)
 #define AXGMAC_CFG1_RCV_STRICT		0x00000010		// RCV only 802.3AE when CLEAR
 #define AXGMAC_CFG1_CHECK_LEN		0x00000008		// Verify frame length
-#define AXGMAC_CFG1_GEN_FCS			0x00000004		// Generate FCS
+#define AXGMAC_CFG1_GEN_FCS		0x00000004		// Generate FCS
 #define AXGMAC_CFG1_PAD_MASK		0x00000003		// Mask for pad bits
-#define AXGMAC_CFG1_PAD_64			0x00000001		// Pad frames to 64 bytes
+#define AXGMAC_CFG1_PAD_64		0x00000001		// Pad frames to 64 bytes
 #define AXGMAC_CFG1_PAD_VLAN		0x00000002		// Detect VLAN and pad to 68 bytes
-#define AXGMAC_CFG1_PAD_68			0x00000003		// Pad to 68 bytes
+#define AXGMAC_CFG1_PAD_68		0x00000003		// Pad to 68 bytes
 
 // A-XGMAC Configuration Register 2
 #define AXGMAC_CFG2_GEN_PAUSE		0x80000000		// Generate single pause frame (test)
 #define AXGMAC_CFG2_LF_MANUAL		0x08000000		// Manual link fault sequence
-#define AXGMAC_CFG2_LF_AUTO			0x04000000		// Auto link fault sequence
+#define AXGMAC_CFG2_LF_AUTO		0x04000000		// Auto link fault sequence
 #define AXGMAC_CFG2_LF_REMOTE		0x02000000		// Remote link fault (READ ONLY)
 #define AXGMAC_CFG2_LF_LOCAL		0x01000000		// Local link fault (READ ONLY)
 #define AXGMAC_CFG2_IPG_MASK		0x001F0000		// Inter packet gap
-#define AXGMAC_CFG2_IPG_SHIFT		16
+#define AXGMAC_CFG2_IPG_SHIFT			16
 #define AXGMAC_CFG2_PAUSE_XMT		0x00008000		// Pause transmit module
 #define AXGMAC_CFG2_IPG_EXTEN		0x00000020		// Enable IPG extension algorithm
 #define AXGMAC_CFG2_IPGEX_MASK		0x0000001F		// IPG extension
@@ -299,9 +299,9 @@
 #define AXGMAC_SARHIGH_OCTET_SIX	0x00FF0000		// Sixth octet
 
 // A-XGMAC Maximum frame length register
-#define AXGMAC_MAXFRAME_XMT			0x3FFF0000		// Maximum transmit frame length
+#define AXGMAC_MAXFRAME_XMT		0x3FFF0000		// Maximum transmit frame length
 #define AXGMAC_MAXFRAME_XMT_SHIFT	16
-#define AXGMAC_MAXFRAME_RCV			0x0000FFFF		// Maximum receive frame length
+#define AXGMAC_MAXFRAME_RCV		0x0000FFFF		// Maximum receive frame length
 // This register doesn't need to be written for standard MTU.
 // For jumbo, I'll just statically define the value here.  This
 // value sets the receive byte count to 9036 (0x234C) and the
@@ -324,34 +324,34 @@
 
 // A-XGMAC AMIIM Field Register
 #define AXGMAC_AMIIM_FIELD_ST		0xC0000000		// 2-bit ST field
-#define AXGMAC_AMIIM_FIELD_ST_SHIFT			30
+#define AXGMAC_AMIIM_FIELD_ST_SHIFT		30
 #define AXGMAC_AMIIM_FIELD_OP		0x30000000		// 2-bit OP field
-#define AXGMAC_AMIIM_FIELD_OP_SHIFT			28
-#define AXGMAC_AMIIM_FIELD_PORT_ADDR 0x0F800000		// Port address field (hstphyadx in spec)
+#define AXGMAC_AMIIM_FIELD_OP_SHIFT		28
+#define AXGMAC_AMIIM_FIELD_PORT_ADDR	0x0F800000		// Port address field (hstphyadx in spec)
 #define AXGMAC_AMIIM_FIELD_PORT_SHIFT		23
 #define AXGMAC_AMIIM_FIELD_DEV_ADDR	0x007C0000		// Device address field (hstregadx in spec)
 #define AXGMAC_AMIIM_FIELD_DEV_SHIFT		18
 #define AXGMAC_AMIIM_FIELD_TA		0x00030000		// 2-bit TA field
-#define AXGMAC_AMIIM_FIELD_TA_SHIFT			16
+#define AXGMAC_AMIIM_FIELD_TA_SHIFT		16
 #define AXGMAC_AMIIM_FIELD_DATA		0x0000FFFF		// Data field
 
 // Values for the AXGMAC_AMIIM_FIELD_OP field in the A-XGMAC AMIIM Field Register
-#define	MIIM_OP_ADDR						0		// MIIM Address set operation
-#define	MIIM_OP_WRITE						1		// MIIM Write register operation
-#define	MIIM_OP_READ						2		// MIIM Read register operation
+#define	MIIM_OP_ADDR				0		// MIIM Address set operation
+#define	MIIM_OP_WRITE				1		// MIIM Write register operation
+#define	MIIM_OP_READ				2		// MIIM Read register operation
 #define	MIIM_OP_ADDR_SHIFT	(MIIM_OP_ADDR << AXGMAC_AMIIM_FIELD_OP_SHIFT)
 
 // Values for the AXGMAC_AMIIM_FIELD_PORT_ADDR field in the A-XGMAC AMIIM Field Register
-#define	MIIM_PORT_NUM						1		// All Sahara MIIM modules use port 1
+#define	MIIM_PORT_NUM				1		// All Sahara MIIM modules use port 1
 
 // Values for the AXGMAC_AMIIM_FIELD_DEV_ADDR field in the A-XGMAC AMIIM Field Register
-#define	MIIM_DEV_PHY_PMA					1		// PHY PMA/PMD module MIIM device number
-#define	MIIM_DEV_PHY_PCS					3		// PHY PCS module MIIM device number
-#define	MIIM_DEV_PHY_XS						4		// PHY XS module MIIM device number
-#define	MIIM_DEV_XGXS						5		// XGXS MIIM device number
+#define	MIIM_DEV_PHY_PMA			1		// PHY PMA/PMD module MIIM device number
+#define	MIIM_DEV_PHY_PCS			3		// PHY PCS module MIIM device number
+#define	MIIM_DEV_PHY_XS				4		// PHY XS module MIIM device number
+#define	MIIM_DEV_XGXS				5		// XGXS MIIM device number
 
 // Values for the AXGMAC_AMIIM_FIELD_TA field in the A-XGMAC AMIIM Field Register
-#define	MIIM_TA_10GB						2		// set to 2 for 10 GB operation
+#define	MIIM_TA_10GB				2		// set to 2 for 10 GB operation
 
 // A-XGMAC AMIIM Configuration Register
 #define AXGMAC_AMIIM_CFG_NOPREAM	0x00000080		// Bypass preamble of mngmt frame
@@ -365,25 +365,25 @@
 #define AXGMAC_AMIIM_INDC_BUSY		0x00000001		// Set until cmd operation complete
 
 // Link Status and Control Register
-#define	LS_PHY_CLR_RESET			0x80000000		// Clear reset signal to PHY
+#define	LS_PHY_CLR_RESET		0x80000000		// Clear reset signal to PHY
 #define	LS_SERDES_POWER_DOWN		0x40000000		// Power down the Sahara Serdes
-#define	LS_XGXS_ENABLE				0x20000000		// Enable the XAUI XGXS logic
-#define	LS_XGXS_CTL					0x10000000		// Hold XAUI XGXS logic reset until Serdes is up
-#define	LS_SERDES_DOWN				0x08000000		// When 0, XAUI Serdes is up and initialization is complete
-#define	LS_TRACE_DOWN				0x04000000		// When 0, Trace Serdes is up and initialization is complete
-#define	LS_PHY_CLK_25MHZ			0x02000000		// Set PHY clock to 25 MHz (else 156.125 MHz)
-#define	LS_PHY_CLK_EN				0x01000000		// Enable clock to PHY
-#define	LS_XAUI_LINK_UP				0x00000010		// XAUI link is up
-#define	LS_XAUI_LINK_CHNG			0x00000008		// XAUI link status has changed
-#define	LS_LINK_ALARM				0x00000004		// Link alarm pin
-#define	LS_ATTN_CTRL_MASK			0x00000003		// Mask link attention control bits
-#define	LS_ATTN_ALARM				0x00000000		// 00 => Attn on link alarm
+#define	LS_XGXS_ENABLE			0x20000000		// Enable the XAUI XGXS logic
+#define	LS_XGXS_CTL			0x10000000		// Hold XAUI XGXS logic reset until Serdes is up
+#define	LS_SERDES_DOWN			0x08000000		// When 0, XAUI Serdes is up and initialization is complete
+#define	LS_TRACE_DOWN			0x04000000		// When 0, Trace Serdes is up and initialization is complete
+#define	LS_PHY_CLK_25MHZ		0x02000000		// Set PHY clock to 25 MHz (else 156.125 MHz)
+#define	LS_PHY_CLK_EN			0x01000000		// Enable clock to PHY
+#define	LS_XAUI_LINK_UP			0x00000010		// XAUI link is up
+#define	LS_XAUI_LINK_CHNG		0x00000008		// XAUI link status has changed
+#define	LS_LINK_ALARM			0x00000004		// Link alarm pin
+#define	LS_ATTN_CTRL_MASK		0x00000003		// Mask link attention control bits
+#define	LS_ATTN_ALARM			0x00000000		// 00 => Attn on link alarm
 #define	LS_ATTN_ALARM_OR_STAT_CHNG	0x00000001		// 01 => Attn on link alarm or status change
-#define	LS_ATTN_STAT_CHNG			0x00000002		// 10 => Attn on link status change
-#define	LS_ATTN_NONE				0x00000003		// 11 => no Attn
+#define	LS_ATTN_STAT_CHNG		0x00000002		// 10 => Attn on link status change
+#define	LS_ATTN_NONE			0x00000003		// 11 => no Attn
 
 // Link Address High Registers
-#define	LINK_ADDR_ENABLE			0x80000000		// Enable this link address
+#define	LINK_ADDR_ENABLE		0x80000000		// Enable this link address
 
 
 /***************************************************************************
@@ -396,7 +396,7 @@
 #define XGXS_ADDRESS_STATUS1		0x0001			// XS Status 1
 #define XGXS_ADDRESS_DEVID_LOW		0x0002			// XS Device ID (low)
 #define XGXS_ADDRESS_DEVID_HIGH		0x0003			// XS Device ID (high)
-#define XGXS_ADDRESS_SPEED			0x0004			// XS Speed ability
+#define XGXS_ADDRESS_SPEED		0x0004			// XS Speed ability
 #define XGXS_ADDRESS_DEV_LOW		0x0005			// XS Devices in package
 #define XGXS_ADDRESS_DEV_HIGH		0x0006			// XS Devices in package
 #define XGXS_ADDRESS_STATUS2		0x0008			// XS Status 2
@@ -410,27 +410,27 @@
 #define XGXS_ADDRESS_RESET_HI2		0x8003			// Vendor-Specific Reset Hi 2
 
 // XS Control 1 register bit definitions
-#define XGXS_CONTROL1_RESET			0x8000			// Reset - self clearing
+#define XGXS_CONTROL1_RESET		0x8000			// Reset - self clearing
 #define XGXS_CONTROL1_LOOPBACK		0x4000			// Enable loopback
 #define XGXS_CONTROL1_SPEED1		0x2000			// 0 = unspecified, 1 = 10Gb+
 #define XGXS_CONTROL1_LOWPOWER		0x0400			// 1 = Low power mode
 #define XGXS_CONTROL1_SPEED2		0x0040			// Same as SPEED1 (?)
-#define XGXS_CONTROL1_SPEED			0x003C			// Everything reserved except zero (?)
+#define XGXS_CONTROL1_SPEED		0x003C			// Everything reserved except zero (?)
 
 // XS Status 1 register bit definitions
-#define XGXS_STATUS1_FAULT			0x0080			// Fault detected
-#define XGXS_STATUS1_LINK			0x0004			// 1 = Link up
+#define XGXS_STATUS1_FAULT		0x0080			// Fault detected
+#define XGXS_STATUS1_LINK		0x0004			// 1 = Link up
 #define XGXS_STATUS1_LOWPOWER		0x0002			// 1 = Low power supported
 
 // XS Speed register bit definitions
-#define XGXS_SPEED_10G				0x0001			// 1 = 10G capable
+#define XGXS_SPEED_10G			0x0001			// 1 = 10G capable
 
 // XS Devices register bit definitions
-#define XGXS_DEVICES_DTE			0x0020			// DTE XS Present
-#define XGXS_DEVICES_PHY			0x0010			// PHY XS Present
-#define XGXS_DEVICES_PCS			0x0008			// PCS Present
-#define XGXS_DEVICES_WIS			0x0004			// WIS Present
-#define XGXS_DEVICES_PMD			0x0002			// PMD/PMA Present
+#define XGXS_DEVICES_DTE		0x0020			// DTE XS Present
+#define XGXS_DEVICES_PHY		0x0010			// PHY XS Present
+#define XGXS_DEVICES_PCS		0x0008			// PCS Present
+#define XGXS_DEVICES_WIS		0x0004			// WIS Present
+#define XGXS_DEVICES_PMD		0x0002			// PMD/PMA Present
 #define XGXS_DEVICES_CLAUSE22		0x0001			// Clause 22 registers present
 
 // XS Devices High register bit definitions
@@ -444,18 +444,18 @@
 #define XGXS_STATUS2_RCV_FAULT		0x0400			// Receive fault
 
 // XS Package ID High register bit definitions
-#define XGXS_PKGID_HIGH_ORG			0xFC00			// Organizationally Unique
-#define XGXS_PKGID_HIGH_MFG			0x03F0			// Manufacturer Model
-#define XGXS_PKGID_HIGH_REV			0x000F			// Revision Number
+#define XGXS_PKGID_HIGH_ORG		0xFC00			// Organizationally Unique
+#define XGXS_PKGID_HIGH_MFG		0x03F0			// Manufacturer Model
+#define XGXS_PKGID_HIGH_REV		0x000F			// Revision Number
 
 // XS Lane Status register bit definitions
-#define XGXS_LANE_PHY				0x1000			// PHY/DTE lane alignment status
-#define XGXS_LANE_PATTERN			0x0800			// Pattern testing ability
-#define XGXS_LANE_LOOPBACK			0x0400			// PHY loopback ability
-#define XGXS_LANE_SYNC3				0x0008			// Lane 3 sync
-#define XGXS_LANE_SYNC2				0x0004			// Lane 2 sync
-#define XGXS_LANE_SYNC1				0x0002			// Lane 1 sync
-#define XGXS_LANE_SYNC0				0x0001			// Lane 0 sync
+#define XGXS_LANE_PHY			0x1000			// PHY/DTE lane alignment status
+#define XGXS_LANE_PATTERN		0x0800			// Pattern testing ability
+#define XGXS_LANE_LOOPBACK		0x0400			// PHY loopback ability
+#define XGXS_LANE_SYNC3			0x0008			// Lane 3 sync
+#define XGXS_LANE_SYNC2			0x0004			// Lane 2 sync
+#define XGXS_LANE_SYNC1			0x0002			// Lane 1 sync
+#define XGXS_LANE_SYNC0			0x0001			// Lane 0 sync
 
 // XS Test Control register bit definitions
 #define XGXS_TEST_PATTERN_ENABLE	0x0004			// Test pattern enabled
@@ -473,10 +473,10 @@
 // LASI (Link Alarm Status Interrupt) Registers (located in MIIM_DEV_PHY_PMA device)
 #define LASI_RX_ALARM_CONTROL		0x9000			// LASI RX_ALARM Control
 #define LASI_TX_ALARM_CONTROL		0x9001			// LASI TX_ALARM Control
-#define LASI_CONTROL				0x9002			// LASI Control
+#define LASI_CONTROL			0x9002			// LASI Control
 #define LASI_RX_ALARM_STATUS		0x9003			// LASI RX_ALARM Status
 #define LASI_TX_ALARM_STATUS		0x9004			// LASI TX_ALARM Status
-#define LASI_STATUS					0x9005			// LASI Status
+#define LASI_STATUS			0x9005			// LASI Status
 
 // LASI_CONTROL bit definitions
 #define	LASI_CTL_RX_ALARM_ENABLE	0x0004			// Enable RX_ALARM interrupts
@@ -489,34 +489,34 @@
 #define	LASI_STATUS_LS_ALARM		0x0001			// Link Status
 
 // PHY registers - PMA/PMD (device 1)
-#define	PHY_PMA_CONTROL1			0x0000			// PMA/PMD Control 1
-#define	PHY_PMA_STATUS1				0x0001			// PMA/PMD Status 1
-#define	PHY_PMA_RCV_DET				0x000A			// PMA/PMD Receive Signal Detect
+#define	PHY_PMA_CONTROL1		0x0000			// PMA/PMD Control 1
+#define	PHY_PMA_STATUS1			0x0001			// PMA/PMD Status 1
+#define	PHY_PMA_RCV_DET			0x000A			// PMA/PMD Receive Signal Detect
 		// other PMA/PMD registers exist and can be defined as needed
 
 // PHY registers - PCS (device 3)
-#define	PHY_PCS_CONTROL1			0x0000			// PCS Control 1
-#define	PHY_PCS_STATUS1				0x0001			// PCS Status 1
-#define	PHY_PCS_10G_STATUS1			0x0020			// PCS 10GBASE-R Status 1
+#define	PHY_PCS_CONTROL1		0x0000			// PCS Control 1
+#define	PHY_PCS_STATUS1			0x0001			// PCS Status 1
+#define	PHY_PCS_10G_STATUS1		0x0020			// PCS 10GBASE-R Status 1
 		// other PCS registers exist and can be defined as needed
 
 // PHY registers - XS (device 4)
-#define	PHY_XS_CONTROL1				0x0000			// XS Control 1
-#define	PHY_XS_STATUS1				0x0001			// XS Status 1
-#define	PHY_XS_LANE_STATUS			0x0018			// XS Lane Status
+#define	PHY_XS_CONTROL1			0x0000			// XS Control 1
+#define	PHY_XS_STATUS1			0x0001			// XS Status 1
+#define	PHY_XS_LANE_STATUS		0x0018			// XS Lane Status
 		// other XS registers exist and can be defined as needed
 
 // PHY_PMA_CONTROL1 register bit definitions
-#define	PMA_CONTROL1_RESET			0x8000			// PMA/PMD reset
+#define	PMA_CONTROL1_RESET		0x8000			// PMA/PMD reset
 
 // PHY_PMA_RCV_DET register bit definitions
-#define	PMA_RCV_DETECT				0x0001			// PMA/PMD receive signal detect
+#define	PMA_RCV_DETECT			0x0001			// PMA/PMD receive signal detect
 
 // PHY_PCS_10G_STATUS1 register bit definitions
-#define	PCS_10B_BLOCK_LOCK			0x0001			// PCS 10GBASE-R locked to receive blocks
+#define	PCS_10B_BLOCK_LOCK		0x0001			// PCS 10GBASE-R locked to receive blocks
 
 // PHY_XS_LANE_STATUS register bit definitions
-#define	XS_LANE_ALIGN				0x1000			// XS transmit lanes aligned
+#define	XS_LANE_ALIGN			0x1000			// XS transmit lanes aligned
 
 // PHY Microcode download data structure
 typedef struct _PHY_UCODE {
@@ -558,8 +558,8 @@
 		// command codes
 #define XMT_DESC_CMD_RAW_SEND		0		// raw send descriptor
 #define XMT_DESC_CMD_CSUM_INSERT	1		// checksum insert descriptor
-#define XMT_DESC_CMD_FORMAT			2		// format descriptor
-#define XMT_DESC_CMD_PRIME			3		// prime descriptor
+#define XMT_DESC_CMD_FORMAT		2		// format descriptor
+#define XMT_DESC_CMD_PRIME		3		// prime descriptor
 #define XMT_DESC_CMD_CODE_SHFT		6		// comand code shift (shift to bits [31:30] in word 0)
 		// shifted command codes
 #define XMT_RAW_SEND		(XMT_DESC_CMD_RAW_SEND    << XMT_DESC_CMD_CODE_SHFT)
@@ -569,22 +569,22 @@
 
 // XMT_DESC Control Byte (XmtCtl) definitions
 // NOTE:  These bits do not work on Sahara (Rev A)!
-#define	XMT_CTL_PAUSE_FRAME			0x80	// current frame is a pause control frame (for statistics)
+#define	XMT_CTL_PAUSE_FRAME		0x80	// current frame is a pause control frame (for statistics)
 #define	XMT_CTL_CONTROL_FRAME		0x40	// current frame is a control frame (for statistics)
 #define	XMT_CTL_PER_PKT_QUAL		0x20	// per packet qualifier
 #define	XMT_CTL_PAD_MODE_NONE		0x00	// do not pad frame
-#define	XMT_CTL_PAD_MODE_64			0x08	// pad frame to 64 bytes
+#define	XMT_CTL_PAD_MODE_64		0x08	// pad frame to 64 bytes
 #define	XMT_CTL_PAD_MODE_VLAN_68	0x10	// pad frame to 64 bytes, and VLAN frames to 68 bytes
-#define	XMT_CTL_PAD_MODE_68			0x18	// pad frame to 68 bytes
-#define	XMT_CTL_GEN_FCS				0x04	// generate FCS (CRC) for this frame
-#define	XMT_CTL_DELAY_FCS_0			0x00	// do not delay FCS calcution
-#define	XMT_CTL_DELAY_FCS_1			0x01	// delay FCS calculation by 1 (4-byte) word
-#define	XMT_CTL_DELAY_FCS_2			0x02	// delay FCS calculation by 2 (4-byte) words
-#define	XMT_CTL_DELAY_FCS_3			0x03	// delay FCS calculation by 3 (4-byte) words
+#define	XMT_CTL_PAD_MODE_68		0x18	// pad frame to 68 bytes
+#define	XMT_CTL_GEN_FCS			0x04	// generate FCS (CRC) for this frame
+#define	XMT_CTL_DELAY_FCS_0		0x00	// do not delay FCS calcution
+#define	XMT_CTL_DELAY_FCS_1		0x01	// delay FCS calculation by 1 (4-byte) word
+#define	XMT_CTL_DELAY_FCS_2		0x02	// delay FCS calculation by 2 (4-byte) words
+#define	XMT_CTL_DELAY_FCS_3		0x03	// delay FCS calculation by 3 (4-byte) words
 
 // XMT_DESC XmtBufId definition
-#define XMT_BUF_ID_SHFT		8			// The Xmt buffer ID is formed by dividing
-										// the buffer (DRAM) address by 256 (or << 8)
+#define XMT_BUF_ID_SHFT		8	// The Xmt buffer ID is formed by dividing
+					// the buffer (DRAM) address by 256 (or << 8)
 
 /*****************************************************************************
  * Receiver Sequencer Definitions
@@ -594,8 +594,8 @@
 #define	RCV_EVTQ_RBFID_MASK		0x0000FFFF	// bit mask for the Receive Buffer ID
 
 // Receive Buffer ID definition
-#define RCV_BUF_ID_SHFT		5			// The Rcv buffer ID is formed by dividing
-										// the buffer (DRAM) address by 32 (or << 5)
+#define RCV_BUF_ID_SHFT		5	// The Rcv buffer ID is formed by dividing
+					// the buffer (DRAM) address by 32 (or << 5)
 
 // Format of the 18 byte Receive Buffer returned by the
 // Receive Sequencer for received packets
@@ -623,48 +623,48 @@
  * Queue definitions
  *****************************************************************************/
 
-// Ingress (read only) queue numbers
-#define PXY_BUF_Q		0		// Proxy Buffer Queue
-#define HST_EVT_Q		1		// Host Event Queue
-#define XMT_BUF_Q		2		// Transmit Buffer Queue
-#define SKT_EVL_Q		3		// RcvSqr Socket Event Low Priority Queue
-#define RCV_EVL_Q		4		// RcvSqr Rcv Event Low Priority Queue
-#define SKT_EVH_Q		5		// RcvSqr Socket Event High Priority Queue
-#define RCV_EVH_Q		6		// RcvSqr Rcv Event High Priority Queue
-#define DMA_RSP_Q		7		// Dma Response Queue - one per CPU context
-// Local (read/write) queue numbers
-#define LOCAL_A_Q		8		// Spare local Queue
-#define LOCAL_B_Q		9		// Spare local Queue
-#define LOCAL_C_Q		10		// Spare local Queue
-#define FSM_EVT_Q		11		// Finite-State-Machine Event Queue
-#define SBF_PAL_Q		12		// System Buffer Physical Address (low) Queue
-#define SBF_PAH_Q		13		// System Buffer Physical Address (high) Queue
-#define SBF_VAL_Q		14		// System Buffer Virtual Address (low) Queue
-#define SBF_VAH_Q		15		// System Buffer Virtual Address (high) Queue
-// Egress (write only) queue numbers
-#define H2G_CMD_Q		16		// Host to GlbRam DMA Command Queue
-#define H2D_CMD_Q		17		// Host to DRAM DMA Command Queue
-#define G2H_CMD_Q		18		// GlbRam to Host DMA Command Queue
-#define G2D_CMD_Q		19		// GlbRam to DRAM DMA Command Queue
-#define D2H_CMD_Q		20		// DRAM to Host DMA Command Queue
-#define D2G_CMD_Q		21		// DRAM to GlbRam DMA Command Queue
-#define D2D_CMD_Q		22		// DRAM to DRAM DMA Command Queue
-#define PXL_CMD_Q		23		// Low Priority Proxy Command Queue
-#define PXH_CMD_Q		24		// High Priority Proxy Command Queue
-#define RSQ_CMD_Q		25		// Receive Sequencer Command Queue
-#define RCV_BUF_Q		26		// Receive Buffer Queue
+/* Ingress (read only) queue numbers */
+#define PXY_BUF_Q		0		/* Proxy Buffer Queue */
+#define HST_EVT_Q		1		/* Host Event Queue */
+#define XMT_BUF_Q		2		/* Transmit Buffer Queue */
+#define SKT_EVL_Q		3		/* RcvSqr Socket Event Low Priority Queue */
+#define RCV_EVL_Q		4		/* RcvSqr Rcv Event Low Priority Queue */
+#define SKT_EVH_Q		5		/* RcvSqr Socket Event High Priority Queue */
+#define RCV_EVH_Q		6		/* RcvSqr Rcv Event High Priority Queue */
+#define DMA_RSP_Q		7		/* Dma Response Queue - one per CPU context */
+/* Local (read/write) queue numbers */
+#define LOCAL_A_Q		8		/* Spare local Queue */
+#define LOCAL_B_Q		9		/* Spare local Queue */
+#define LOCAL_C_Q		10		/* Spare local Queue */
+#define FSM_EVT_Q		11		/* Finite-State-Machine Event Queue */
+#define SBF_PAL_Q		12		/* System Buffer Physical Address (low) Queue */
+#define SBF_PAH_Q		13		/* System Buffer Physical Address (high) Queue */
+#define SBF_VAL_Q		14		/* System Buffer Virtual Address (low) Queue */
+#define SBF_VAH_Q		15		/* System Buffer Virtual Address (high) Queue */
+/* Egress (write only) queue numbers */
+#define H2G_CMD_Q		16		/* Host to GlbRam DMA Command Queue */
+#define H2D_CMD_Q		17		/* Host to DRAM DMA Command Queue */
+#define G2H_CMD_Q		18		/* GlbRam to Host DMA Command Queue */
+#define G2D_CMD_Q		19		/* GlbRam to DRAM DMA Command Queue */
+#define D2H_CMD_Q		20		/* DRAM to Host DMA Command Queue */
+#define D2G_CMD_Q		21		/* DRAM to GlbRam DMA Command Queue */
+#define D2D_CMD_Q		22		/* DRAM to DRAM DMA Command Queue */
+#define PXL_CMD_Q		23		/* Low Priority Proxy Command Queue */
+#define PXH_CMD_Q		24		/* High Priority Proxy Command Queue */
+#define RSQ_CMD_Q		25		/* Receive Sequencer Command Queue */
+#define RCV_BUF_Q		26		/* Receive Buffer Queue */
 
-// Bit definitions for the Proxy Command queues (PXL_CMD_Q and PXH_CMD_Q)
-#define PXY_COPY_EN		0x00200000		// enable copy of xmt descriptor to xmt command queue
-#define PXY_SIZE_16		0x00000000		// copy 16 bytes
-#define PXY_SIZE_32		0x00100000		// copy 32 bytes
+/* Bit definitions for the Proxy Command queues (PXL_CMD_Q and PXH_CMD_Q) */
+#define PXY_COPY_EN		0x00200000		/* enable copy of xmt descriptor to xmt command queue */
+#define PXY_SIZE_16		0x00000000		/* copy 16 bytes */
+#define PXY_SIZE_32		0x00100000		/* copy 32 bytes */
 
 /*****************************************************************************
  * SXG EEPROM/Flash Configuration Definitions
  *****************************************************************************/
 #pragma pack(push, 1)
 
-//
+/* */
 typedef struct _HW_CFG_DATA {
 	ushort		Addr;
 	union {
@@ -673,22 +673,22 @@
 	};
 } HW_CFG_DATA, *PHW_CFG_DATA;
 
-//
+/* */
 #define	NUM_HW_CFG_ENTRIES	((128/sizeof(HW_CFG_DATA)) - 4)
 
-// MAC address
+/* MAC address */
 typedef struct _SXG_CONFIG_MAC {
-	unsigned char		MacAddr[6];			// MAC Address
+	unsigned char		MacAddr[6];			/* MAC Address */
 } SXG_CONFIG_MAC, *PSXG_CONFIG_MAC;
 
-//
+/* */
 typedef struct _ATK_FRU {
 	unsigned char		PartNum[6];
 	unsigned char		Revision[2];
 	unsigned char		Serial[14];
 } ATK_FRU, *PATK_FRU;
 
-// OEM FRU Format types
+/* OEM FRU Format types */
 #define	ATK_FRU_FORMAT		0x0000
 #define CPQ_FRU_FORMAT		0x0001
 #define DELL_FRU_FORMAT		0x0002
@@ -697,24 +697,24 @@
 #define EMC_FRU_FORMAT		0x0005
 #define NO_FRU_FORMAT		0xFFFF
 
-// EEPROM/Flash Format
+/* EEPROM/Flash Format */
 typedef struct _SXG_CONFIG {
-	//
-	// Section 1 (128 bytes)
-	//
-	ushort			MagicWord;			// EEPROM/FLASH Magic code 'A5A5'
-	ushort			SpiClks;			// SPI bus clock dividers
+	/* */
+	/* Section 1 (128 bytes) */
+	/* */
+	ushort			MagicWord;			/* EEPROM/FLASH Magic code 'A5A5' */
+	ushort			SpiClks;			/* SPI bus clock dividers */
 	HW_CFG_DATA		HwCfg[NUM_HW_CFG_ENTRIES];
-	//
-	//
-	//
-	ushort			Version;			// EEPROM format version
-	SXG_CONFIG_MAC	MacAddr[4];			// space for 4 MAC addresses
-	ATK_FRU			AtkFru;				// FRU information
-	ushort			OemFruFormat;		// OEM FRU format type
-	unsigned char			OemFru[76];			// OEM FRU information (optional)
-	ushort			Checksum;			// Checksum of section 2
-	// CS info XXXTODO
+	/* */
+	/* */
+	/* */
+	ushort			Version;			/* EEPROM format version */
+	SXG_CONFIG_MAC	MacAddr[4];			/* space for 4 MAC addresses */
+	ATK_FRU			AtkFru;				/* FRU information */
+	ushort			OemFruFormat;		/* OEM FRU format type */
+	unsigned char			OemFru[76];			/* OEM FRU information (optional) */
+	ushort			Checksum;			/* Checksum of section 2 */
+	/* CS info XXXTODO */
 } SXG_CONFIG, *PSXG_CONFIG;
 #pragma pack(pop)
 
@@ -723,12 +723,12 @@
  *****************************************************************************/
 
 // Sahara (ASIC level) defines
-#define SAHARA_GRAM_SIZE			0x020000		// GRAM size - 128 KB
-#define SAHARA_DRAM_SIZE			0x200000		// DRAM size - 2 MB
-#define SAHARA_QRAM_SIZE			0x004000		// QRAM size - 16K entries (64 KB)
-#define SAHARA_WCS_SIZE				0x002000		// WCS - 8K instructions (x 108 bits)
+#define SAHARA_GRAM_SIZE		0x020000		// GRAM size - 128 KB
+#define SAHARA_DRAM_SIZE		0x200000		// DRAM size - 2 MB
+#define SAHARA_QRAM_SIZE		0x004000		// QRAM size - 16K entries (64 KB)
+#define SAHARA_WCS_SIZE			0x002000		// WCS - 8K instructions (x 108 bits)
 
 // Arabia (board level) defines
-#define	FLASH_SIZE				0x080000		// 512 KB (4 Mb)
-#define	EEPROM_SIZE_XFMR		512				// true EEPROM size (bytes), including xfmr area
-#define	EEPROM_SIZE_NO_XFMR		256				// EEPROM size excluding xfmr area
+#define	FLASH_SIZE			0x080000		// 512 KB (4 Mb)
+#define	EEPROM_SIZE_XFMR		512			// true EEPROM size (bytes), including xfmr area
+#define	EEPROM_SIZE_NO_XFMR		256			// EEPROM size excluding xfmr area
diff --git a/drivers/staging/sxg/sxgphycode.h b/drivers/staging/sxg/sxgphycode.h
index 26b36c8..8dbaeda 100644
--- a/drivers/staging/sxg/sxgphycode.h
+++ b/drivers/staging/sxg/sxgphycode.h
@@ -34,7 +34,7 @@
 	 */
 	/* Addr, Data */
 	{0xc017, 0xfeb0},	/* flip RX_LOS polarity (mandatory */
-				/*  patch for SFP+ applications) */
+	/*  patch for SFP+ applications) */
 	{0xC001, 0x0428},	/* flip RX serial polarity */
 
 	{0xc013, 0xf341},	/* invert lxmit clock (mandatory patch) */
@@ -43,7 +43,7 @@
 	{0xc210, 0x8000},	/* reset datapath (mandatory patch) */
 	{0xc210, 0x0000},	/* reset datapath (mandatory patch) */
 	{0x0000, 0x0032},	/* wait for 50ms for datapath reset to */
-				/* complete. (mandatory patch) */
+	/* complete. (mandatory patch) */
 
 	/* Configure the LED's */
 	{0xc214, 0x0099},	/* configure the LED drivers */
@@ -52,15 +52,15 @@
 
 	/* Transceiver-specific MDIO Patches: */
 	{0xc010, 0x448a},	/* (bit 14) mask out high BER input from the */
-				/* LOS signal in 1.000A */
-				/* (mandatory patch for SR code)*/
+	/* LOS signal in 1.000A */
+	/* (mandatory patch for SR code) */
 	{0xc003, 0x0181},	/* (bit 7) enable the CDR inc setting in */
-				/* 1.C005 (mandatory patch for SR code) */
+	/* 1.C005 (mandatory patch for SR code) */
 
 	/* Transceiver-specific Microcontroller Initialization: */
 	{0xc04a, 0x5200},	/* activate microcontroller and pause */
 	{0x0000, 0x0032},	/* wait 50ms for microcontroller before */
-				/* writing in code. */
+	/* writing in code. */
 
 	/* code block starts here: */
 	{0xcc00, 0x2009},
diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c
index e64918f..72e2092 100644
--- a/drivers/staging/usbip/usbip_common.c
+++ b/drivers/staging/usbip/usbip_common.c
@@ -221,7 +221,7 @@
 static void usbip_dump_usb_ctrlrequest(struct usb_ctrlrequest *cmd)
 {
 	if (!cmd) {
-		printk("      %s : null pointer\n", __FUNCTION__);
+		printk("      %s : null pointer\n", __func__);
 		return;
 	}
 
diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c
index 933ccaf..58e3995 100644
--- a/drivers/staging/usbip/vhci_rx.c
+++ b/drivers/staging/usbip/vhci_rx.c
@@ -202,7 +202,7 @@
 	ret = usbip_xmit(0, ud->tcp_socket, (char *) &pdu, sizeof(pdu), 0);
 	if (ret != sizeof(pdu)) {
 		uerr("receiving pdu failed! size is %d, should be %d\n",
-				ret, sizeof(pdu));
+				ret, (unsigned int)sizeof(pdu));
 		usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
 		return;
 	}
diff --git a/drivers/staging/winbond/Kconfig b/drivers/staging/winbond/Kconfig
index 10d72be..425219e 100644
--- a/drivers/staging/winbond/Kconfig
+++ b/drivers/staging/winbond/Kconfig
@@ -1,6 +1,6 @@
 config W35UND
 	tristate "Winbond driver"
-	depends on MAC80211 && WLAN_80211 && EXPERIMENTAL && !4KSTACKS
+	depends on MAC80211 && WLAN_80211 && USB && EXPERIMENTAL && !4KSTACKS
 	default n
 	---help---
 	  This is highly experimental driver for winbond wifi card on some Kohjinsha notebooks
diff --git a/drivers/staging/winbond/README b/drivers/staging/winbond/README
index 707b6b3..cb944e4 100644
--- a/drivers/staging/winbond/README
+++ b/drivers/staging/winbond/README
@@ -5,6 +5,7 @@
 	- remove typedefs
 	- remove unused ioctls
 	- use cfg80211 for regulatory stuff
+	- fix 4k stack problems
 
 Please send patches to Greg Kroah-Hartman <greg@kroah.com> and
 Pavel Machek <pavel@suse.cz>
diff --git a/drivers/staging/winbond/bss_f.h b/drivers/staging/winbond/bss_f.h
index c957bc9..0131831 100644
--- a/drivers/staging/winbond/bss_f.h
+++ b/drivers/staging/winbond/bss_f.h
@@ -24,7 +24,7 @@
 							 u8 *pBasicRateSet, u8 BasicRateCount,
 							 u8 *pOperationRateSet, u8 OperationRateCount);
 void BSSAddIBSSdata(PWB32_ADAPTER Adapter, PWB_BSSDESCRIPTION psDesData);
-unsigned char boCmpMacAddr( PUCHAR, PUCHAR );
+unsigned char boCmpMacAddr( u8 *, u8 *);
 unsigned char boCmpSSID(struct SSID_Element *psSSID1, struct SSID_Element *psSSID2);
 u16 wBSSfindSSID(PWB32_ADAPTER Adapter, struct SSID_Element *psSsid);
 u16 wRoamingQuery(PWB32_ADAPTER Adapter);
@@ -42,11 +42,11 @@
 void Assemble_IE(PWB32_ADAPTER Adapter, u16 wBssIdx);
 void SetMaxTxRate(PWB32_ADAPTER Adapter);
 
-void CreateWpaIE(PWB32_ADAPTER Adapter, u16* iFildOffset, PUCHAR msg, struct  Management_Frame* msgHeader,
+void CreateWpaIE(PWB32_ADAPTER Adapter, u16* iFildOffset, u8 *msg, struct  Management_Frame* msgHeader,
 				 struct Association_Request_Frame_Body* msgBody, u16 iMSindex); //added by WS 05/14/05
 
 #ifdef _WPA2_
-void CreateRsnIE(PWB32_ADAPTER Adapter, u16* iFildOffset, PUCHAR msg, struct  Management_Frame* msgHeader,
+void CreateRsnIE(PWB32_ADAPTER Adapter, u16* iFildOffset, u8 *msg, struct  Management_Frame* msgHeader,
 				 struct Association_Request_Frame_Body* msgBody, u16 iMSindex);//added by WS 05/14/05
 
 u16 SearchPmkid(PWB32_ADAPTER Adapter, struct  Management_Frame* msgHeader,
diff --git a/drivers/staging/winbond/ds_tkip.h b/drivers/staging/winbond/ds_tkip.h
index 29e5055..6841d66e 100644
--- a/drivers/staging/winbond/ds_tkip.h
+++ b/drivers/staging/winbond/ds_tkip.h
@@ -25,9 +25,9 @@
 	s32		bytes_in_M;	// # bytes in M
 } tkip_t;
 
-//void _append_data( PUCHAR pData, u16 size, tkip_t *p );
-void Mds_MicGet(  void* Adapter,  void* pRxLayer1,  PUCHAR pKey,  PUCHAR pMic );
-void Mds_MicFill(  void* Adapter,  void* pDes,  PUCHAR XmitBufAddress );
+//void _append_data( u8 *pData, u16 size, tkip_t *p );
+void Mds_MicGet(  void* Adapter,  void* pRxLayer1,  u8 *pKey,  u8 *pMic );
+void Mds_MicFill(  void* Adapter,  void* pDes,  u8 *XmitBufAddress );
 
 
 
diff --git a/drivers/staging/winbond/linux/common.h b/drivers/staging/winbond/linux/common.h
index 6b00bad..712a86c 100644
--- a/drivers/staging/winbond/linux/common.h
+++ b/drivers/staging/winbond/linux/common.h
@@ -39,14 +39,6 @@
 // Common type definition
 //===============================================================
 
-typedef u8*            PUCHAR;
-typedef s8*            PCHAR;
-typedef u8*            PBOOLEAN;
-typedef u16*           PUSHORT;
-typedef u32*           PULONG;
-typedef s16*   PSHORT;
-
-
 //===========================================
 #define IGNORE      2
 #define	SUCCESS     1
@@ -110,16 +102,9 @@
 #define OS_ATOMIC_READ( _A, _V )	_V
 #define OS_ATOMIC_INC( _A, _V )		EncapAtomicInc( _A, (void*)_V )
 #define OS_ATOMIC_DEC( _A, _V )		EncapAtomicDec( _A, (void*)_V )
-#define OS_MEMORY_CLEAR( _A, _S )	memset( (PUCHAR)_A,0,_S)
+#define OS_MEMORY_CLEAR( _A, _S )	memset( (u8 *)_A,0,_S)
 #define OS_MEMORY_COMPARE( _A, _B, _S )	(memcmp(_A,_B,_S)? 0 : 1) // Definition is reverse with Ndis 1: the same 0: different
 
-
-#define OS_SPIN_LOCK				spinlock_t
-#define OS_SPIN_LOCK_ALLOCATE( _S )		spin_lock_init( _S );
-#define OS_SPIN_LOCK_FREE( _S )
-#define OS_SPIN_LOCK_ACQUIRED( _S )		spin_lock_irq( _S )
-#define OS_SPIN_LOCK_RELEASED( _S )		spin_unlock_irq( _S );
-
 #define OS_TIMER	struct timer_list
 #define OS_TIMER_INITIAL( _T, _F, _P )			\
 {							\
diff --git a/drivers/staging/winbond/linux/wb35reg.c b/drivers/staging/winbond/linux/wb35reg.c
index 2c0b454..ebb6db5 100644
--- a/drivers/staging/winbond/linux/wb35reg.c
+++ b/drivers/staging/winbond/linux/wb35reg.c
@@ -10,7 +10,7 @@
 // Flag : AUTO_INCREMENT - RegisterNo will auto increment 4
 //		  NO_INCREMENT - Function will write data into the same register
 unsigned char
-Wb35Reg_BurstWrite(phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterData, u8 NumberOfData, u8 Flag)
+Wb35Reg_BurstWrite(phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterData, u8 NumberOfData, u8 Flag)
 {
 	PWB35REG pWb35Reg = &pHwData->Wb35Reg;
 	PURB		pUrb = NULL;
@@ -30,13 +30,13 @@
 	if( pUrb && pRegQueue ) {
 		pRegQueue->DIRECT = 2;// burst write register
 		pRegQueue->INDEX = RegisterNo;
-		pRegQueue->pBuffer = (PULONG)((PUCHAR)pRegQueue + sizeof(REG_QUEUE));
+		pRegQueue->pBuffer = (u32 *)((u8 *)pRegQueue + sizeof(REG_QUEUE));
 		memcpy( pRegQueue->pBuffer, pRegisterData, DataSize );
 		//the function for reversing register data from little endian to big endian
 		for( i=0; i<NumberOfData ; i++ )
 			pRegQueue->pBuffer[i] = cpu_to_le32( pRegQueue->pBuffer[i] );
 
-		dr = (struct usb_ctrlrequest *)((PUCHAR)pRegQueue + sizeof(REG_QUEUE) + DataSize);
+		dr = (struct usb_ctrlrequest *)((u8 *)pRegQueue + sizeof(REG_QUEUE) + DataSize);
 		dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE;
 		dr->bRequest = 0x04; // USB or vendor-defined request code, burst mode
 		dr->wValue = cpu_to_le16( Flag ); // 0: Register number auto-increment, 1: No auto increment
@@ -46,14 +46,14 @@
 		pRegQueue->pUsbReq = dr;
 		pRegQueue->pUrb = pUrb;
 
-		OS_SPIN_LOCK_ACQUIRED( &pWb35Reg->EP0VM_spin_lock );
+		spin_lock_irq( &pWb35Reg->EP0VM_spin_lock );
 		if (pWb35Reg->pRegFirst == NULL)
 			pWb35Reg->pRegFirst = pRegQueue;
 		else
 			pWb35Reg->pRegLast->Next = pRegQueue;
 		pWb35Reg->pRegLast = pRegQueue;
 
-		OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock );
+		spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock );
 
 		// Start EP0VM
 		Wb35Reg_EP0VM_start(pHwData);
@@ -181,7 +181,7 @@
 		pRegQueue->INDEX = RegisterNo;
 		pRegQueue->VALUE = cpu_to_le32(RegisterValue);
 		pRegQueue->RESERVED_VALID = FALSE;
-		dr = (struct usb_ctrlrequest *)((PUCHAR)pRegQueue + sizeof(REG_QUEUE));
+		dr = (struct usb_ctrlrequest *)((u8 *)pRegQueue + sizeof(REG_QUEUE));
 		dr->bRequestType = USB_TYPE_VENDOR|USB_DIR_OUT |USB_RECIP_DEVICE;
 		dr->bRequest = 0x03; // USB or vendor-defined request code, burst mode
 		dr->wValue = cpu_to_le16(0x0);
@@ -193,14 +193,14 @@
 		pRegQueue->pUsbReq = dr;
 		pRegQueue->pUrb = pUrb;
 
-		OS_SPIN_LOCK_ACQUIRED(&pWb35Reg->EP0VM_spin_lock );
+		spin_lock_irq(&pWb35Reg->EP0VM_spin_lock );
 		if (pWb35Reg->pRegFirst == NULL)
 			pWb35Reg->pRegFirst = pRegQueue;
 		else
 			pWb35Reg->pRegLast->Next = pRegQueue;
 		pWb35Reg->pRegLast = pRegQueue;
 
-		OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock );
+		spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock );
 
 		// Start EP0VM
 		Wb35Reg_EP0VM_start(pHwData);
@@ -220,7 +220,7 @@
 // FALSE : register not support
 unsigned char
 Wb35Reg_WriteWithCallbackValue( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue,
-				PCHAR pValue, s8 Len)
+				s8 *pValue, s8 Len)
 {
 	PWB35REG	pWb35Reg = &pHwData->Wb35Reg;
 	struct usb_ctrlrequest *dr;
@@ -243,7 +243,7 @@
 		//NOTE : Users must guarantee the size of value will not exceed the buffer size.
 		memcpy(pRegQueue->RESERVED, pValue, Len);
 		pRegQueue->RESERVED_VALID = TRUE;
-		dr = (struct usb_ctrlrequest *)((PUCHAR)pRegQueue + sizeof(REG_QUEUE));
+		dr = (struct usb_ctrlrequest *)((u8 *)pRegQueue + sizeof(REG_QUEUE));
 		dr->bRequestType = USB_TYPE_VENDOR|USB_DIR_OUT |USB_RECIP_DEVICE;
 		dr->bRequest = 0x03; // USB or vendor-defined request code, burst mode
 		dr->wValue = cpu_to_le16(0x0);
@@ -254,14 +254,14 @@
 		pRegQueue->Next = NULL;
 		pRegQueue->pUsbReq = dr;
 		pRegQueue->pUrb = pUrb;
-		OS_SPIN_LOCK_ACQUIRED (&pWb35Reg->EP0VM_spin_lock );
+		spin_lock_irq (&pWb35Reg->EP0VM_spin_lock );
 		if( pWb35Reg->pRegFirst == NULL )
 			pWb35Reg->pRegFirst = pRegQueue;
 		else
 			pWb35Reg->pRegLast->Next = pRegQueue;
 		pWb35Reg->pRegLast = pRegQueue;
 
-		OS_SPIN_LOCK_RELEASED ( &pWb35Reg->EP0VM_spin_lock );
+		spin_unlock_irq ( &pWb35Reg->EP0VM_spin_lock );
 
 		// Start EP0VM
 		Wb35Reg_EP0VM_start(pHwData);
@@ -278,10 +278,10 @@
 // FALSE : register not support
 // pRegisterValue : It must be a resident buffer due to asynchronous read register.
 unsigned char
-Wb35Reg_ReadSync(  phw_data_t pHwData,  u16 RegisterNo,   PULONG pRegisterValue )
+Wb35Reg_ReadSync(  phw_data_t pHwData,  u16 RegisterNo,   u32 * pRegisterValue )
 {
 	PWB35REG pWb35Reg = &pHwData->Wb35Reg;
-	PULONG	pltmp = pRegisterValue;
+	u32 *	pltmp = pRegisterValue;
 	int ret = -1;
 
 	// Module shutdown
@@ -327,7 +327,7 @@
 // FALSE : register not support
 // pRegisterValue : It must be a resident buffer due to asynchronous read register.
 unsigned char
-Wb35Reg_Read(phw_data_t pHwData, u16 RegisterNo,  PULONG pRegisterValue )
+Wb35Reg_Read(phw_data_t pHwData, u16 RegisterNo,  u32 * pRegisterValue )
 {
 	PWB35REG	pWb35Reg = &pHwData->Wb35Reg;
 	struct usb_ctrlrequest * dr;
@@ -348,7 +348,7 @@
 		pRegQueue->DIRECT = 0;// read register
 		pRegQueue->INDEX = RegisterNo;
 		pRegQueue->pBuffer = pRegisterValue;
-		dr = (struct usb_ctrlrequest *)((PUCHAR)pRegQueue + sizeof(REG_QUEUE));
+		dr = (struct usb_ctrlrequest *)((u8 *)pRegQueue + sizeof(REG_QUEUE));
 		dr->bRequestType = USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN;
 		dr->bRequest = 0x01; // USB or vendor-defined request code, burst mode
 		dr->wValue = cpu_to_le16(0x0);
@@ -359,14 +359,14 @@
 		pRegQueue->Next = NULL;
 		pRegQueue->pUsbReq = dr;
 		pRegQueue->pUrb = pUrb;
-		OS_SPIN_LOCK_ACQUIRED ( &pWb35Reg->EP0VM_spin_lock );
+		spin_lock_irq ( &pWb35Reg->EP0VM_spin_lock );
 		if( pWb35Reg->pRegFirst == NULL )
 			pWb35Reg->pRegFirst = pRegQueue;
 		else
 			pWb35Reg->pRegLast->Next = pRegQueue;
 		pWb35Reg->pRegLast = pRegQueue;
 
-		OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock );
+		spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock );
 
 		// Start EP0VM
 		Wb35Reg_EP0VM_start( pHwData );
@@ -399,7 +399,7 @@
 	PWB35REG	pWb35Reg = &pHwData->Wb35Reg;
 	PURB		pUrb;
 	struct usb_ctrlrequest *dr;
-	PULONG		pBuffer;
+	u32 *		pBuffer;
 	int			ret = -1;
 	PREG_QUEUE	pRegQueue;
 
@@ -411,9 +411,9 @@
 		goto cleanup;
 
 	// Get the register data and send to USB through Irp
-	OS_SPIN_LOCK_ACQUIRED( &pWb35Reg->EP0VM_spin_lock );
+	spin_lock_irq( &pWb35Reg->EP0VM_spin_lock );
 	pRegQueue = pWb35Reg->pRegFirst;
-	OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock );
+	spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock );
 
 	if (!pRegQueue)
 		goto cleanup;
@@ -429,7 +429,7 @@
 
 	usb_fill_control_urb( pUrb, pHwData->WbUsb.udev,
 			      REG_DIRECTION(pHwData->WbUsb.udev,pRegQueue),
-			      (PUCHAR)dr,pBuffer,cpu_to_le16(dr->wLength),
+			      (u8 *)dr,pBuffer,cpu_to_le16(dr->wLength),
 			      Wb35Reg_EP0VM_complete, (void*)pHwData);
 
 	pWb35Reg->EP0vm_state = VM_RUNNING;
@@ -468,12 +468,12 @@
 		OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Reg->RegFireCount );
 	} else {
 		// Complete to send, remove the URB from the first
-		OS_SPIN_LOCK_ACQUIRED( &pWb35Reg->EP0VM_spin_lock );
+		spin_lock_irq( &pWb35Reg->EP0VM_spin_lock );
 		pRegQueue = pWb35Reg->pRegFirst;
 		if (pRegQueue == pWb35Reg->pRegLast)
 			pWb35Reg->pRegLast = NULL;
 		pWb35Reg->pRegFirst = pWb35Reg->pRegFirst->Next;
-		OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock );
+		spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock );
 
 		if (pWb35Reg->EP0VM_status) {
 #ifdef _PE_REG_DUMP_
@@ -513,7 +513,7 @@
 	OS_SLEEP(10000);  // Delay for waiting function enter 940623.1.b
 
 	// Release all the data in RegQueue
-	OS_SPIN_LOCK_ACQUIRED( &pWb35Reg->EP0VM_spin_lock );
+	spin_lock_irq( &pWb35Reg->EP0VM_spin_lock );
 	pRegQueue = pWb35Reg->pRegFirst;
 	while (pRegQueue) {
 		if (pRegQueue == pWb35Reg->pRegLast)
@@ -521,7 +521,7 @@
 		pWb35Reg->pRegFirst = pWb35Reg->pRegFirst->Next;
 
 		pUrb = pRegQueue->pUrb;
-		OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock );
+		spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock );
 		if (pUrb) {
 			usb_free_urb(pUrb);
 			kfree(pRegQueue);
@@ -530,14 +530,11 @@
 			WBDEBUG(("EP0 queue release error\n"));
 			#endif
 		}
-		OS_SPIN_LOCK_ACQUIRED( &pWb35Reg->EP0VM_spin_lock );
+		spin_lock_irq( &pWb35Reg->EP0VM_spin_lock );
 
 		pRegQueue = pWb35Reg->pRegFirst;
 	}
-	OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock );
-
-	// Free resource
-	OS_SPIN_LOCK_FREE(  &pWb35Reg->EP0VM_spin_lock );
+	spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock );
 }
 
 //====================================================================================
@@ -550,7 +547,7 @@
 	u32 SoftwareSet, VCO_trim, TxVga, Region_ScanInterval;
 
 	// Spin lock is acquired for read and write IRP command
-	OS_SPIN_LOCK_ALLOCATE( &pWb35Reg->EP0VM_spin_lock );
+	spin_lock_init( &pWb35Reg->EP0VM_spin_lock );
 
 	// Getting RF module type from EEPROM ------------------------------------
 	Wb35Reg_WriteSync( pHwData, 0x03b4, 0x080d0000 ); // Start EEPROM access + Read + address(0x0d)
@@ -655,7 +652,7 @@
 //    version in _GENREQ.ASM of the DWB NE1000/2000 driver.
 //==================================================================================
 u32
-CardComputeCrc(PUCHAR Buffer, u32 Length)
+CardComputeCrc(u8 * Buffer, u32 Length)
 {
     u32 Crc, Carry;
     u32  i, j;
diff --git a/drivers/staging/winbond/linux/wb35reg_f.h b/drivers/staging/winbond/linux/wb35reg_f.h
index 38e2906..3006cfe 100644
--- a/drivers/staging/winbond/linux/wb35reg_f.h
+++ b/drivers/staging/winbond/linux/wb35reg_f.h
@@ -29,16 +29,16 @@
 
 void Wb35Reg_destroy(  phw_data_t pHwData );
 
-unsigned char Wb35Reg_Read(  phw_data_t pHwData,  u16 RegisterNo,   PULONG pRegisterValue );
-unsigned char Wb35Reg_ReadSync(  phw_data_t pHwData,  u16 RegisterNo,   PULONG pRegisterValue );
+unsigned char Wb35Reg_Read(  phw_data_t pHwData,  u16 RegisterNo,   u32 * pRegisterValue );
+unsigned char Wb35Reg_ReadSync(  phw_data_t pHwData,  u16 RegisterNo,   u32 * pRegisterValue );
 unsigned char Wb35Reg_Write(  phw_data_t pHwData,  u16 RegisterNo,  u32 RegisterValue );
 unsigned char Wb35Reg_WriteSync(  phw_data_t pHwData,  u16 RegisterNo,  u32 RegisterValue );
 unsigned char Wb35Reg_WriteWithCallbackValue(  phw_data_t pHwData,
 								 u16 RegisterNo,
 								 u32 RegisterValue,
-								 PCHAR pValue,
-								 s8	Len);
-unsigned char Wb35Reg_BurstWrite(  phw_data_t pHwData,  u16 RegisterNo,  PULONG pRegisterData,  u8 NumberOfData,  u8 Flag );
+								 s8 *pValue,
+								 s8 Len);
+unsigned char Wb35Reg_BurstWrite(  phw_data_t pHwData,  u16 RegisterNo,  u32 * pRegisterData,  u8 NumberOfData,  u8 Flag );
 
 void Wb35Reg_EP0VM(  phw_data_t pHwData );
 void Wb35Reg_EP0VM_start(  phw_data_t pHwData );
@@ -47,7 +47,7 @@
 u32 BitReverse( u32 dwData, u32 DataLength);
 
 void CardGetMulticastBit(   u8 Address[MAC_ADDR_LENGTH],  u8 *Byte,  u8 *Value );
-u32 CardComputeCrc(  PUCHAR Buffer,  u32 Length );
+u32 CardComputeCrc(  u8 * Buffer,  u32 Length );
 
 void Wb35Reg_phy_calibration(  phw_data_t pHwData );
 void Wb35Reg_Update(  phw_data_t pHwData,  u16 RegisterNo,  u32 RegisterValue );
diff --git a/drivers/staging/winbond/linux/wb35reg_s.h b/drivers/staging/winbond/linux/wb35reg_s.h
index a7595b1..8b35b93 100644
--- a/drivers/staging/winbond/linux/wb35reg_s.h
+++ b/drivers/staging/winbond/linux/wb35reg_s.h
@@ -75,7 +75,7 @@
 	union
 	{
 		u32	VALUE;
-		PULONG	pBuffer;
+		u32 *	pBuffer;
 	};
 	u8	RESERVED[4];// space reserved for communication
 
@@ -143,7 +143,7 @@
 	//-------------------
 	// VM
 	//-------------------
-	OS_SPIN_LOCK	EP0VM_spin_lock; // 4B
+	spinlock_t	EP0VM_spin_lock; // 4B
 	u32	        EP0VM_status;//$$
 	PREG_QUEUE	    pRegFirst;
 	PREG_QUEUE	    pRegLast;
diff --git a/drivers/staging/winbond/linux/wb35rx.c b/drivers/staging/winbond/linux/wb35rx.c
index 26157eb..b4b9f5f 100644
--- a/drivers/staging/winbond/linux/wb35rx.c
+++ b/drivers/staging/winbond/linux/wb35rx.c
@@ -27,7 +27,7 @@
 void Wb35Rx(  phw_data_t pHwData )
 {
 	PWB35RX	pWb35Rx = &pHwData->Wb35Rx;
-	PUCHAR	pRxBufferAddress;
+	u8 *	pRxBufferAddress;
 	PURB	pUrb = (PURB)pWb35Rx->RxUrb;
 	int	retv;
 	u32	RxBufferId;
@@ -35,51 +35,50 @@
 	//
 	// Issuing URB
 	//
-	do {
-		if (pHwData->SurpriseRemove || pHwData->HwStop)
-			break;
+	if (pHwData->SurpriseRemove || pHwData->HwStop)
+		goto error;
 
-		if (pWb35Rx->rx_halt)
-			break;
+	if (pWb35Rx->rx_halt)
+		goto error;
 
-		// Get RxBuffer's ID
-		RxBufferId = pWb35Rx->RxBufferId;
-		if (!pWb35Rx->RxOwner[RxBufferId]) {
-			// It's impossible to run here.
-			#ifdef _PE_RX_DUMP_
-			WBDEBUG(("Rx driver fifo unavailable\n"));
-			#endif
-			break;
-		}
+	// Get RxBuffer's ID
+	RxBufferId = pWb35Rx->RxBufferId;
+	if (!pWb35Rx->RxOwner[RxBufferId]) {
+		// It's impossible to run here.
+		#ifdef _PE_RX_DUMP_
+		WBDEBUG(("Rx driver fifo unavailable\n"));
+		#endif
+		goto error;
+	}
 
-		// Update buffer point, then start to bulkin the data from USB
-		pWb35Rx->RxBufferId++;
-		pWb35Rx->RxBufferId %= MAX_USB_RX_BUFFER_NUMBER;
+	// Update buffer point, then start to bulkin the data from USB
+	pWb35Rx->RxBufferId++;
+	pWb35Rx->RxBufferId %= MAX_USB_RX_BUFFER_NUMBER;
 
-		pWb35Rx->CurrentRxBufferId = RxBufferId;
+	pWb35Rx->CurrentRxBufferId = RxBufferId;
 
-		if (1 != OS_MEMORY_ALLOC((void* *)&pWb35Rx->pDRx, MAX_USB_RX_BUFFER)) {
-			printk("w35und: Rx memory alloc failed\n");
-			break;
-		}
-		pRxBufferAddress = pWb35Rx->pDRx;
+	if (1 != OS_MEMORY_ALLOC((void* *)&pWb35Rx->pDRx, MAX_USB_RX_BUFFER)) {
+		printk("w35und: Rx memory alloc failed\n");
+		goto error;
+	}
+	pRxBufferAddress = pWb35Rx->pDRx;
 
-		usb_fill_bulk_urb(pUrb, pHwData->WbUsb.udev,
-				  usb_rcvbulkpipe(pHwData->WbUsb.udev, 3),
-				  pRxBufferAddress, MAX_USB_RX_BUFFER,
-				  Wb35Rx_Complete, pHwData);
+	usb_fill_bulk_urb(pUrb, pHwData->WbUsb.udev,
+			  usb_rcvbulkpipe(pHwData->WbUsb.udev, 3),
+			  pRxBufferAddress, MAX_USB_RX_BUFFER,
+			  Wb35Rx_Complete, pHwData);
 
-		pWb35Rx->EP3vm_state = VM_RUNNING;
+	pWb35Rx->EP3vm_state = VM_RUNNING;
 
-		retv = wb_usb_submit_urb(pUrb);
+	retv = wb_usb_submit_urb(pUrb);
 
-		if (retv != 0) {
-			printk("Rx URB sending error\n");
-			break;
-		}
-		return;
-	} while(FALSE);
+	if (retv != 0) {
+		printk("Rx URB sending error\n");
+		goto error;
+	}
+	return;
 
+error:
 	// VM stop
 	pWb35Rx->EP3vm_state = VM_STOP;
 	OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Rx->RxFireCounter );
@@ -89,7 +88,7 @@
 {
 	phw_data_t	pHwData = pUrb->context;
 	PWB35RX		pWb35Rx = &pHwData->Wb35Rx;
-	PUCHAR		pRxBufferAddress;
+	u8 *		pRxBufferAddress;
 	u32		SizeCheck;
 	u16		BulkLength;
 	u32		RxBufferId;
@@ -99,65 +98,63 @@
 	pWb35Rx->EP3vm_state = VM_COMPLETED;
 	pWb35Rx->EP3VM_status = pUrb->status;//Store the last result of Irp
 
-	do {
-		RxBufferId = pWb35Rx->CurrentRxBufferId;
+	RxBufferId = pWb35Rx->CurrentRxBufferId;
 
-		pRxBufferAddress = pWb35Rx->pDRx;
-		BulkLength = (u16)pUrb->actual_length;
+	pRxBufferAddress = pWb35Rx->pDRx;
+	BulkLength = (u16)pUrb->actual_length;
 
-		// The IRP is completed
-		pWb35Rx->EP3vm_state = VM_COMPLETED;
+	// The IRP is completed
+	pWb35Rx->EP3vm_state = VM_COMPLETED;
 
-		if (pHwData->SurpriseRemove || pHwData->HwStop) // Must be here, or RxBufferId is invalid
-			break;
+	if (pHwData->SurpriseRemove || pHwData->HwStop) // Must be here, or RxBufferId is invalid
+		goto error;
 
-		if (pWb35Rx->rx_halt)
-			break;
+	if (pWb35Rx->rx_halt)
+		goto error;
 
-		// Start to process the data only in successful condition
-		pWb35Rx->RxOwner[ RxBufferId ] = 0; // Set the owner to driver
-		R00.value = le32_to_cpu(*(PULONG)pRxBufferAddress);
+	// Start to process the data only in successful condition
+	pWb35Rx->RxOwner[ RxBufferId ] = 0; // Set the owner to driver
+	R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress);
 
-		// The URB is completed, check the result
-		if (pWb35Rx->EP3VM_status != 0) {
-			#ifdef _PE_USB_STATE_DUMP_
-			WBDEBUG(("EP3 IoCompleteRoutine return error\n"));
-			DebugUsbdStatusInformation( pWb35Rx->EP3VM_status );
-			#endif
+	// The URB is completed, check the result
+	if (pWb35Rx->EP3VM_status != 0) {
+		#ifdef _PE_USB_STATE_DUMP_
+		WBDEBUG(("EP3 IoCompleteRoutine return error\n"));
+		DebugUsbdStatusInformation( pWb35Rx->EP3VM_status );
+		#endif
+		pWb35Rx->EP3vm_state = VM_STOP;
+		goto error;
+	}
+
+	// 20060220 For recovering. check if operating in single USB mode
+	if (!HAL_USB_MODE_BURST(pHwData)) {
+		SizeCheck = R00.R00_receive_byte_count;  //20060926 anson's endian
+		if ((SizeCheck & 0x03) > 0)
+			SizeCheck -= 4;
+		SizeCheck = (SizeCheck + 3) & ~0x03;
+		SizeCheck += 12; // 8 + 4 badbeef
+		if ((BulkLength > 1600) ||
+			(SizeCheck > 1600) ||
+			(BulkLength != SizeCheck) ||
+			(BulkLength == 0)) { // Add for fail Urb
 			pWb35Rx->EP3vm_state = VM_STOP;
-			break;
+			pWb35Rx->Ep3ErrorCount2++;
 		}
+	}
 
-		// 20060220 For recovering. check if operating in single USB mode
-		if (!HAL_USB_MODE_BURST(pHwData)) {
-			SizeCheck = R00.R00_receive_byte_count;  //20060926 anson's endian
-			if ((SizeCheck & 0x03) > 0)
-				SizeCheck -= 4;
-			SizeCheck = (SizeCheck + 3) & ~0x03;
-			SizeCheck += 12; // 8 + 4 badbeef
-			if ((BulkLength > 1600) ||
-				(SizeCheck > 1600) ||
-				(BulkLength != SizeCheck) ||
-				(BulkLength == 0)) { // Add for fail Urb
-				pWb35Rx->EP3vm_state = VM_STOP;
-				pWb35Rx->Ep3ErrorCount2++;
-			}
-		}
+	// Indicating the receiving data
+	pWb35Rx->ByteReceived += BulkLength;
+	pWb35Rx->RxBufferSize[ RxBufferId ] = BulkLength;
 
-		// Indicating the receiving data
-		pWb35Rx->ByteReceived += BulkLength;
-		pWb35Rx->RxBufferSize[ RxBufferId ] = BulkLength;
+	if (!pWb35Rx->RxOwner[ RxBufferId ])
+		Wb35Rx_indicate(pHwData);
 
-		if (!pWb35Rx->RxOwner[ RxBufferId ])
-			Wb35Rx_indicate(pHwData);
+	kfree(pWb35Rx->pDRx);
+	// Do the next receive
+	Wb35Rx(pHwData);
+	return;
 
-		kfree(pWb35Rx->pDRx);
-		// Do the next receive
-		Wb35Rx(pHwData);
-		return;
-
-	} while(FALSE);
-
+error:
 	pWb35Rx->RxOwner[ RxBufferId ] = 1; // Set the owner to hardware
 	OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Rx->RxFireCounter );
 	pWb35Rx->EP3vm_state = VM_STOP;
@@ -223,7 +220,7 @@
 
 void Wb35Rx_adjust(PDESCRIPTOR pRxDes)
 {
-	PULONG	pRxBufferAddress;
+	u32 *	pRxBufferAddress;
 	u32	DecryptionMethod;
 	u32	i;
 	u16	BufferSize;
@@ -264,7 +261,7 @@
 {
 	DESCRIPTOR	RxDes;
 	PWB35RX	pWb35Rx = &pHwData->Wb35Rx;
-	PUCHAR		pRxBufferAddress;
+	u8 *		pRxBufferAddress;
 	u16		PacketSize;
 	u16		stmp, BufferSize, stmp2 = 0;
 	u32		RxBufferId;
@@ -283,13 +280,13 @@
 
 		// Parse the bulkin buffer
 		while (BufferSize >= 4) {
-			if ((cpu_to_le32(*(PULONG)pRxBufferAddress) & 0x0fffffff) == RX_END_TAG) //Is ending? 921002.9.a
+			if ((cpu_to_le32(*(u32 *)pRxBufferAddress) & 0x0fffffff) == RX_END_TAG) //Is ending? 921002.9.a
 				break;
 
 			// Get the R00 R01 first
-			RxDes.R00.value = le32_to_cpu(*(PULONG)pRxBufferAddress);
+			RxDes.R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress);
 			PacketSize = (u16)RxDes.R00.R00_receive_byte_count;
-			RxDes.R01.value = le32_to_cpu(*((PULONG)(pRxBufferAddress+4)));
+			RxDes.R01.value = le32_to_cpu(*((u32 *)(pRxBufferAddress+4)));
 			// For new DMA 4k
 			if ((PacketSize & 0x03) > 0)
 				PacketSize -= 4;
diff --git a/drivers/staging/winbond/linux/wb35rx_s.h b/drivers/staging/winbond/linux/wb35rx_s.h
index 53b831f..b90c269 100644
--- a/drivers/staging/winbond/linux/wb35rx_s.h
+++ b/drivers/staging/winbond/linux/wb35rx_s.h
@@ -41,7 +41,7 @@
 	u32		Ep3ErrorCount2; // 20060625.1 Usbd for Rx DMA error count
 
 	int		EP3VM_status;
-	PUCHAR	pDRx;
+	u8 *	pDRx;
 
 } WB35RX, *PWB35RX;
 
diff --git a/drivers/staging/winbond/linux/wb35tx.c b/drivers/staging/winbond/linux/wb35tx.c
index cf19c3b..ba9d512 100644
--- a/drivers/staging/winbond/linux/wb35tx.c
+++ b/drivers/staging/winbond/linux/wb35tx.c
@@ -12,7 +12,7 @@
 
 
 unsigned char
-Wb35Tx_get_tx_buffer(phw_data_t pHwData, PUCHAR *pBuffer )
+Wb35Tx_get_tx_buffer(phw_data_t pHwData, u8 **pBuffer)
 {
 	PWB35TX pWb35Tx = &pHwData->Wb35Tx;
 
@@ -37,7 +37,7 @@
 {
 	PWB35TX		pWb35Tx = &pHwData->Wb35Tx;
 	PADAPTER	Adapter = pHwData->Adapter;
-	PUCHAR		pTxBufferAddress;
+	u8		*pTxBufferAddress;
 	PMDS		pMds = &Adapter->Mds;
 	struct urb *	pUrb = (struct urb *)pWb35Tx->Tx4Urb;
 	int         	retv;
@@ -100,25 +100,24 @@
 	pWb35Tx->TxSendIndex++;
 	pWb35Tx->TxSendIndex %= MAX_USB_TX_BUFFER_NUMBER;
 
-	do {
-		if (pHwData->SurpriseRemove || pHwData->HwStop) // Let WbWlanHalt to handle surprise remove
-			break;
+	if (pHwData->SurpriseRemove || pHwData->HwStop) // Let WbWlanHalt to handle surprise remove
+		goto error;
 
-		if (pWb35Tx->tx_halt)
-			break;
+	if (pWb35Tx->tx_halt)
+		goto error;
 
-		// The URB is completed, check the result
-		if (pWb35Tx->EP4VM_status != 0) {
-			printk("URB submission failed\n");
-			pWb35Tx->EP4vm_state = VM_STOP;
-			break; // Exit while(FALSE);
-		}
+	// The URB is completed, check the result
+	if (pWb35Tx->EP4VM_status != 0) {
+		printk("URB submission failed\n");
+		pWb35Tx->EP4vm_state = VM_STOP;
+		goto error;
+	}
 
-		Mds_Tx(Adapter);
-		Wb35Tx(pHwData);
-		return;
-	} while(FALSE);
+	Mds_Tx(Adapter);
+	Wb35Tx(pHwData);
+	return;
 
+error:
 	OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Tx->TxFireCounter );
 	pWb35Tx->EP4vm_state = VM_STOP;
 }
@@ -225,36 +224,33 @@
 {
 	PWB35TX pWb35Tx = &pHwData->Wb35Tx;
 	struct urb *	pUrb = (struct urb *)pWb35Tx->Tx2Urb;
-	PULONG	pltmp = (PULONG)pWb35Tx->EP2_buf;
+	u32 *	pltmp = (u32 *)pWb35Tx->EP2_buf;
 	int		retv;
 
-	do {
-		if (pHwData->SurpriseRemove || pHwData->HwStop)
-			break;
+	if (pHwData->SurpriseRemove || pHwData->HwStop)
+		goto error;
 
-		if (pWb35Tx->tx_halt)
-			break;
+	if (pWb35Tx->tx_halt)
+		goto error;
 
-		//
-		// Issuing URB
-		//
-		usb_fill_int_urb( pUrb, pHwData->WbUsb.udev, usb_rcvintpipe(pHwData->WbUsb.udev,2),
-				  pltmp, MAX_INTERRUPT_LENGTH, Wb35Tx_EP2VM_complete, pHwData, 32);
+	//
+	// Issuing URB
+	//
+	usb_fill_int_urb( pUrb, pHwData->WbUsb.udev, usb_rcvintpipe(pHwData->WbUsb.udev,2),
+			  pltmp, MAX_INTERRUPT_LENGTH, Wb35Tx_EP2VM_complete, pHwData, 32);
 
-		pWb35Tx->EP2vm_state = VM_RUNNING;
-		retv = wb_usb_submit_urb( pUrb );
+	pWb35Tx->EP2vm_state = VM_RUNNING;
+	retv = wb_usb_submit_urb( pUrb );
 
-		if(retv < 0) {
-			#ifdef _PE_TX_DUMP_
-			WBDEBUG(("EP2 Tx Irp sending error\n"));
-			#endif
-			break;
-		}
+	if (retv < 0) {
+		#ifdef _PE_TX_DUMP_
+		WBDEBUG(("EP2 Tx Irp sending error\n"));
+		#endif
+		goto error;
+	}
 
-		return;
-
-	} while(FALSE);
-
+	return;
+error:
 	pWb35Tx->EP2vm_state = VM_STOP;
 	OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Tx->TxResultCount );
 }
@@ -266,7 +262,7 @@
 	T02_DESCRIPTOR	T02, TSTATUS;
 	PADAPTER	Adapter = (PADAPTER)pHwData->Adapter;
 	PWB35TX		pWb35Tx = &pHwData->Wb35Tx;
-	PULONG		pltmp = (PULONG)pWb35Tx->EP2_buf;
+	u32 *		pltmp = (u32 *)pWb35Tx->EP2_buf;
 	u32		i;
 	u16		InterruptInLength;
 
@@ -275,38 +271,36 @@
 	pWb35Tx->EP2vm_state = VM_COMPLETED;
 	pWb35Tx->EP2VM_status = pUrb->status;
 
-	do {
-		// For Linux 2.4. Interrupt will always trigger
-		if( pHwData->SurpriseRemove || pHwData->HwStop ) // Let WbWlanHalt to handle surprise remove
-			break;
+	// For Linux 2.4. Interrupt will always trigger
+	if (pHwData->SurpriseRemove || pHwData->HwStop) // Let WbWlanHalt to handle surprise remove
+		goto error;
 
-		if( pWb35Tx->tx_halt )
-			break;
+	if (pWb35Tx->tx_halt)
+		goto error;
 
-		//The Urb is completed, check the result
-		if (pWb35Tx->EP2VM_status != 0) {
-			WBDEBUG(("EP2 IoCompleteRoutine return error\n"));
-			pWb35Tx->EP2vm_state= VM_STOP;
-			break; // Exit while(FALSE);
-		}
+	//The Urb is completed, check the result
+	if (pWb35Tx->EP2VM_status != 0) {
+		WBDEBUG(("EP2 IoCompleteRoutine return error\n"));
+		pWb35Tx->EP2vm_state= VM_STOP;
+		goto error;
+	}
 
-		// Update the Tx result
-		InterruptInLength = pUrb->actual_length;
-		// Modify for minimum memory access and DWORD alignment.
-		T02.value = cpu_to_le32(pltmp[0]) >> 8; // [31:8] -> [24:0]
-		InterruptInLength -= 1;// 20051221.1.c Modify the follow for more stable
-		InterruptInLength >>= 2; // InterruptInLength/4
-		for (i=1; i<=InterruptInLength; i++) {
-			T02.value |= ((cpu_to_le32(pltmp[i]) & 0xff) << 24);
+	// Update the Tx result
+	InterruptInLength = pUrb->actual_length;
+	// Modify for minimum memory access and DWORD alignment.
+	T02.value = cpu_to_le32(pltmp[0]) >> 8; // [31:8] -> [24:0]
+	InterruptInLength -= 1;// 20051221.1.c Modify the follow for more stable
+	InterruptInLength >>= 2; // InterruptInLength/4
+	for (i = 1; i <= InterruptInLength; i++) {
+		T02.value |= ((cpu_to_le32(pltmp[i]) & 0xff) << 24);
 
-			TSTATUS.value = T02.value;  //20061009 anson's endian
-			Mds_SendComplete( Adapter, &TSTATUS );
-			T02.value = cpu_to_le32(pltmp[i]) >> 8;
-		}
+		TSTATUS.value = T02.value;  //20061009 anson's endian
+		Mds_SendComplete( Adapter, &TSTATUS );
+		T02.value = cpu_to_le32(pltmp[i]) >> 8;
+	}
 
-		return;
-	} while(FALSE);
-
+	return;
+error:
 	OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Tx->TxResultCount );
 	pWb35Tx->EP2vm_state = VM_STOP;
 }
diff --git a/drivers/staging/winbond/linux/wb35tx_f.h b/drivers/staging/winbond/linux/wb35tx_f.h
index 7705a84..107b129 100644
--- a/drivers/staging/winbond/linux/wb35tx_f.h
+++ b/drivers/staging/winbond/linux/wb35tx_f.h
@@ -3,7 +3,7 @@
 //====================================
 unsigned char Wb35Tx_initial(	 phw_data_t pHwData );
 void Wb35Tx_destroy(  phw_data_t pHwData );
-unsigned char Wb35Tx_get_tx_buffer(  phw_data_t pHwData,  PUCHAR *pBuffer );
+unsigned char Wb35Tx_get_tx_buffer(  phw_data_t pHwData,  u8 **pBuffer );
 
 void Wb35Tx_EP2VM(  phw_data_t pHwData );
 void Wb35Tx_EP2VM_start(  phw_data_t pHwData );
diff --git a/drivers/staging/winbond/linux/wbusb.c b/drivers/staging/winbond/linux/wbusb.c
index cbad5fb..f4a7875 100644
--- a/drivers/staging/winbond/linux/wbusb.c
+++ b/drivers/staging/winbond/linux/wbusb.c
@@ -6,42 +6,29 @@
 #include "sysdef.h"
 #include <net/mac80211.h>
 
-
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 MODULE_VERSION("0.1");
 
-
-//============================================================
-// vendor ID and product ID can into here for others
-//============================================================
-static struct usb_device_id Id_Table[] =
-{
-  {USB_DEVICE( 0x0416, 0x0035 )},
-  {USB_DEVICE( 0x18E8, 0x6201 )},
-  {USB_DEVICE( 0x18E8, 0x6206 )},
-  {USB_DEVICE( 0x18E8, 0x6217 )},
-  {USB_DEVICE( 0x18E8, 0x6230 )},
-  {USB_DEVICE( 0x18E8, 0x6233 )},
-  {USB_DEVICE( 0x1131, 0x2035 )},
-  {  }
+static struct usb_device_id wb35_table[] __devinitdata = {
+	{USB_DEVICE(0x0416, 0x0035)},
+	{USB_DEVICE(0x18E8, 0x6201)},
+	{USB_DEVICE(0x18E8, 0x6206)},
+	{USB_DEVICE(0x18E8, 0x6217)},
+	{USB_DEVICE(0x18E8, 0x6230)},
+	{USB_DEVICE(0x18E8, 0x6233)},
+	{USB_DEVICE(0x1131, 0x2035)},
+	{ 0, }
 };
 
-MODULE_DEVICE_TABLE(usb, Id_Table);
+MODULE_DEVICE_TABLE(usb, wb35_table);
 
-static struct usb_driver wb35_driver = {
-	.name =		"w35und",
-	.probe =	wb35_probe,
-	.disconnect = wb35_disconnect,
-	.id_table = Id_Table,
-};
-
-static const struct ieee80211_rate wbsoft_rates[] = {
+static struct ieee80211_rate wbsoft_rates[] = {
 	{ .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
 };
 
-static const struct ieee80211_channel wbsoft_channels[] = {
+static struct ieee80211_channel wbsoft_channels[] = {
 	{ .center_freq = 2412},
 };
 
@@ -62,9 +49,22 @@
 	printk("wbsoft_remove interface called\n");
 }
 
-static int wbsoft_nop(void)
+static void wbsoft_stop(struct ieee80211_hw *hw)
 {
-	printk("wbsoft_nop called\n");
+	printk(KERN_INFO "%s called\n", __func__);
+}
+
+static int wbsoft_get_stats(struct ieee80211_hw *hw,
+			    struct ieee80211_low_level_stats *stats)
+{
+	printk(KERN_INFO "%s called\n", __func__);
+	return 0;
+}
+
+static int wbsoft_get_tx_stats(struct ieee80211_hw *hw,
+			       struct ieee80211_tx_queue_stats *stats)
+{
+	printk(KERN_INFO "%s called\n", __func__);
 	return 0;
 }
 
@@ -105,8 +105,7 @@
 	*total_flags = new_flags;
 }
 
-static int wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
-		      struct ieee80211_tx_control *control)
+static int wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	char *buffer = kmalloc(skb->len, GFP_ATOMIC);
 	printk("Sending frame %d bytes\n", skb->len);
@@ -136,7 +135,7 @@
 	hal_set_current_channel(&my_adapter->sHwData, ch);
 	hal_set_beacon_period(&my_adapter->sHwData, conf->beacon_int);
 //	hal_set_cap_info(&my_adapter->sHwData, ?? );
-// hal_set_ssid(phw_data_t pHwData,  PUCHAR pssid,  u8 ssid_len); ??
+// hal_set_ssid(phw_data_t pHwData,  u8 * pssid,  u8 ssid_len); ??
 	hal_set_accept_broadcast(&my_adapter->sHwData, 1);
 	hal_set_accept_promiscuous(&my_adapter->sHwData,  1);
 	hal_set_accept_multicast(&my_adapter->sHwData,  1);
@@ -148,7 +147,7 @@
 
 //	hal_start_bss(&my_adapter->sHwData, WLAN_BSSTYPE_INFRASTRUCTURE);	??
 
-//void hal_set_rates(phw_data_t pHwData, PUCHAR pbss_rates,
+//void hal_set_rates(phw_data_t pHwData, u8 * pbss_rates,
 //		   u8 length, unsigned char basic_rate_set)
 
 	return 0;
@@ -171,14 +170,14 @@
 static const struct ieee80211_ops wbsoft_ops = {
 	.tx			= wbsoft_tx,
 	.start			= wbsoft_start,		/* Start can be pretty much empty as we do WbWLanInitialize() during probe? */
-	.stop			= wbsoft_nop,
+	.stop			= wbsoft_stop,
 	.add_interface		= wbsoft_add_interface,
 	.remove_interface	= wbsoft_remove_interface,
 	.config			= wbsoft_config,
 	.config_interface	= wbsoft_config_interface,
 	.configure_filter	= wbsoft_configure_filter,
-	.get_stats		= wbsoft_nop,
-	.get_tx_stats		= wbsoft_nop,
+	.get_stats		= wbsoft_get_stats,
+	.get_tx_stats		= wbsoft_get_tx_stats,
 	.get_tsf		= wbsoft_get_tsf,
 // conf_tx: hal_set_cwmin()/hal_set_cwmax;
 };
@@ -187,21 +186,6 @@
 };
 
 
-int __init wb35_init(void)
-{
-	printk("[w35und]driver init\n");
-	return usb_register(&wb35_driver);
-}
-
-void __exit wb35_exit(void)
-{
-	printk("[w35und]driver exit\n");
-	usb_deregister( &wb35_driver );
-}
-
-module_init(wb35_init);
-module_exit(wb35_exit);
-
 // Usb kernel subsystem will call this function when a new device is plugged into.
 int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table)
 {
@@ -210,7 +194,7 @@
 	PWBUSB		pWbUsb;
         struct usb_host_interface *interface;
 	struct usb_endpoint_descriptor *endpoint;
-	int	i, ret = -1;
+	int	ret = -1;
 	u32	ltmp;
 	struct usb_device *udev = interface_to_usbdev(intf);
 
@@ -218,114 +202,95 @@
 
 	printk("[w35und]wb35_probe ->\n");
 
-	do {
-		for (i=0; i<(sizeof(Id_Table)/sizeof(struct usb_device_id)); i++ ) {
-			if ((udev->descriptor.idVendor == Id_Table[i].idVendor) &&
-				(udev->descriptor.idProduct == Id_Table[i].idProduct)) {
-				printk("[w35und]Found supported hardware\n");
-				break;
-			}
-		}
-		if ((i == (sizeof(Id_Table)/sizeof(struct usb_device_id)))) {
-			#ifdef _PE_USB_INI_DUMP_
-			WBDEBUG(("[w35und] This is not the one we are interested about\n"));
-			#endif
-			return -ENODEV;
+	// 20060630.2 Check the device if it already be opened
+	ret = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
+			      0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
+			      0x0, 0x400, &ltmp, 4, HZ*100 );
+	if (ret < 0)
+		goto error;
+
+	ltmp = cpu_to_le32(ltmp);
+	if (ltmp)  // Is already initialized?
+		goto error;
+
+	Adapter = kzalloc(sizeof(ADAPTER), GFP_KERNEL);
+
+	my_adapter = Adapter;
+	pWbLinux = &Adapter->WbLinux;
+	pWbUsb = &Adapter->sHwData.WbUsb;
+	pWbUsb->udev = udev;
+
+        interface = intf->cur_altsetting;
+        endpoint = &interface->endpoint[0].desc;
+
+	if (endpoint[2].wMaxPacketSize == 512) {
+		printk("[w35und] Working on USB 2.0\n");
+		pWbUsb->IsUsb20 = 1;
+	}
+
+	if (!WbWLanInitialize(Adapter)) {
+		printk("[w35und]WbWLanInitialize fail\n");
+		goto error;
+	}
+
+	{
+		struct wbsoft_priv *priv;
+		struct ieee80211_hw *dev;
+		static struct ieee80211_supported_band band;
+		int res;
+
+		dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
+
+		if (!dev) {
+			printk("w35und: ieee80211 alloc failed\n" );
+			BUG();
 		}
 
-		// 20060630.2 Check the device if it already be opened
-		ret = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
-				      0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
-				      0x0, 0x400, &ltmp, 4, HZ*100 );
-		if( ret < 0 )
-			break;
+		my_dev = dev;
 
-		ltmp = cpu_to_le32(ltmp);
-		if (ltmp)  // Is already initialized?
-			break;
-
-
-		Adapter = kzalloc(sizeof(ADAPTER), GFP_KERNEL);
-
-		my_adapter = Adapter;
-		pWbLinux = &Adapter->WbLinux;
-		pWbUsb = &Adapter->sHwData.WbUsb;
-		pWbUsb->udev = udev;
-
-	        interface = intf->cur_altsetting;
-	        endpoint = &interface->endpoint[0].desc;
-
-		if (endpoint[2].wMaxPacketSize == 512) {
-			printk("[w35und] Working on USB 2.0\n");
-			pWbUsb->IsUsb20 = 1;
-		}
-
-		if (!WbWLanInitialize(Adapter)) {
-			printk("[w35und]WbWLanInitialize fail\n");
-			break;
-		}
-
+		SET_IEEE80211_DEV(dev, &udev->dev);
 		{
-			struct wbsoft_priv *priv;
-			struct ieee80211_hw *dev;
-			int res;
-
-			dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
-
-			if (!dev) {
-				printk("w35und: ieee80211 alloc failed\n" );
-				BUG();
-			}
-
-			my_dev = dev;
-
-			SET_IEEE80211_DEV(dev, &udev->dev);
-			{
-				phw_data_t pHwData = &Adapter->sHwData;
-				unsigned char		dev_addr[MAX_ADDR_LEN];
-				hal_get_permanent_address(pHwData, dev_addr);
-				SET_IEEE80211_PERM_ADDR(dev, dev_addr);
-			}
+			phw_data_t pHwData = &Adapter->sHwData;
+			unsigned char		dev_addr[MAX_ADDR_LEN];
+			hal_get_permanent_address(pHwData, dev_addr);
+			SET_IEEE80211_PERM_ADDR(dev, dev_addr);
+		}
 
 
-			dev->extra_tx_headroom = 12;	/* FIXME */
-			dev->flags = 0;
+		dev->extra_tx_headroom = 12;	/* FIXME */
+		dev->flags = 0;
 
-			dev->channel_change_time = 1000;
-//			dev->max_rssi = 100;
+		dev->channel_change_time = 1000;
+//		dev->max_rssi = 100;
 
-			dev->queues = 1;
+		dev->queues = 1;
 
-			static struct ieee80211_supported_band band;
+		band.channels = wbsoft_channels;
+		band.n_channels = ARRAY_SIZE(wbsoft_channels);
+		band.bitrates = wbsoft_rates;
+		band.n_bitrates = ARRAY_SIZE(wbsoft_rates);
 
-			band.channels = wbsoft_channels;
-			band.n_channels = ARRAY_SIZE(wbsoft_channels);
-			band.bitrates = wbsoft_rates;
-			band.n_bitrates = ARRAY_SIZE(wbsoft_rates);
-
-			dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band;
+		dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band;
 #if 0
-			wbsoft_modes[0].num_channels = 1;
-			wbsoft_modes[0].channels = wbsoft_channels;
-			wbsoft_modes[0].mode = MODE_IEEE80211B;
-			wbsoft_modes[0].num_rates = ARRAY_SIZE(wbsoft_rates);
-			wbsoft_modes[0].rates = wbsoft_rates;
+		wbsoft_modes[0].num_channels = 1;
+		wbsoft_modes[0].channels = wbsoft_channels;
+		wbsoft_modes[0].mode = MODE_IEEE80211B;
+		wbsoft_modes[0].num_rates = ARRAY_SIZE(wbsoft_rates);
+		wbsoft_modes[0].rates = wbsoft_rates;
 
-			res = ieee80211_register_hwmode(dev, &wbsoft_modes[0]);
-			BUG_ON(res);
+		res = ieee80211_register_hwmode(dev, &wbsoft_modes[0]);
+		BUG_ON(res);
 #endif
 
-			res = ieee80211_register_hw(dev);
-			BUG_ON(res);
-		}
+		res = ieee80211_register_hw(dev);
+		BUG_ON(res);
+	}
 
-		usb_set_intfdata( intf, Adapter );
+	usb_set_intfdata( intf, Adapter );
 
-		printk("[w35und] _probe OK\n");
-		return 0;
-
-	} while(FALSE);
-
+	printk("[w35und] _probe OK\n");
+	return 0;
+error:
 	return -ENOMEM;
 }
 
@@ -401,4 +366,22 @@
 
 }
 
+static struct usb_driver wb35_driver = {
+	.name		= "w35und",
+	.id_table	= wb35_table,
+	.probe		= wb35_probe,
+	.disconnect	= wb35_disconnect,
+};
 
+static int __init wb35_init(void)
+{
+	return usb_register(&wb35_driver);
+}
+
+static void __exit wb35_exit(void)
+{
+	usb_deregister(&wb35_driver);
+}
+
+module_init(wb35_init);
+module_exit(wb35_exit);
diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c
index 8ce6389c..f1de813 100644
--- a/drivers/staging/winbond/mds.c
+++ b/drivers/staging/winbond/mds.c
@@ -40,7 +40,7 @@
 	PMDS		pMds = &Adapter->Mds;
 	DESCRIPTOR	TxDes;
 	PDESCRIPTOR	pTxDes = &TxDes;
-	PUCHAR		XmitBufAddress;
+	u8		*XmitBufAddress;
 	u16		XmitBufSize, PacketSize, stmp, CurrentSize, FragmentThreshold;
 	u8		FillIndex, TxDesIndex, FragmentCount, FillCount;
 	unsigned char	BufferFilled = FALSE, MICAdd = 0;
@@ -90,7 +90,7 @@
 			BufferFilled = TRUE;
 
 			/* Leaves first u8 intact */
-			memset((PUCHAR)pTxDes + 1, 0, sizeof(DESCRIPTOR) - 1);
+			memset((u8 *)pTxDes + 1, 0, sizeof(DESCRIPTOR) - 1);
 
 			TxDesIndex = pMds->TxDesIndex;//Get the current ID
 			pTxDes->Descriptor_ID = TxDesIndex;
@@ -229,10 +229,10 @@
 }
 
 void
-Mds_HeaderCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer)
+Mds_HeaderCopy(PADAPTER Adapter, PDESCRIPTOR pDes, u8 *TargetBuffer)
 {
 	PMDS	pMds = &Adapter->Mds;
-	PUCHAR	src_buffer = pDes->buffer_address[0];//931130.5.g
+	u8	*src_buffer = pDes->buffer_address[0];//931130.5.g
 	PT00_DESCRIPTOR	pT00;
 	PT01_DESCRIPTOR	pT01;
 	u16	stmp;
@@ -276,7 +276,7 @@
 	//
 	// Set tx rate
 	//
-	stmp = *(PUSHORT)(TargetBuffer+30); // 2n alignment address
+	stmp = *(u16 *)(TargetBuffer+30); // 2n alignment address
 
 	//Use basic rate
 	ctmp1 = ctmpf = CURRENT_TX_RATE_FOR_MNG;
@@ -326,11 +326,13 @@
 
 // The function return the 4n size of usb pk
 u16
-Mds_BodyCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer)
+Mds_BodyCopy(PADAPTER Adapter, PDESCRIPTOR pDes, u8 *TargetBuffer)
 {
 	PT00_DESCRIPTOR	pT00;
 	PMDS	pMds = &Adapter->Mds;
-	PUCHAR	buffer, src_buffer, pctmp;
+	u8	*buffer;
+	u8	*src_buffer;
+	u8	*pctmp;
 	u16	Size = 0;
 	u16	SizeLeft, CopySize, CopyLeft, stmp;
 	u8	buf_index, FragmentCount = 0;
@@ -354,7 +356,7 @@
 		SizeLeft -= CopySize;
 
 		// 1 Byte operation
-		pctmp = (PUCHAR)( buffer + 8 + DOT_11_SEQUENCE_OFFSET );
+		pctmp = (u8 *)( buffer + 8 + DOT_11_SEQUENCE_OFFSET );
 		*pctmp &= 0xf0;
 		*pctmp |= FragmentCount;//931130.5.m
 		if( !FragmentCount )
@@ -379,7 +381,7 @@
 				buf_index++;
 				buf_index %= MAX_DESCRIPTOR_BUFFER_INDEX;
 			} else {
-				PUCHAR	pctmp = pDes->buffer_address[buf_index];
+				u8	*pctmp = pDes->buffer_address[buf_index];
 				pctmp += CopySize;
 				pDes->buffer_address[buf_index] = pctmp;
 				pDes->buffer_size[buf_index] -= CopySize;
@@ -419,7 +421,7 @@
 
 	pT00->T00_last_mpdu = 1;
 	pT00->T00_IsLastMpdu = 1;
-	buffer = (PUCHAR)pT00 + 8; // +8 for USB hdr
+	buffer = (u8 *)pT00 + 8; // +8 for USB hdr
 	buffer[1] &= ~0x04; // Clear more frag bit of 802.11 frame control
 	pDes->FragmentCount = FragmentCount; // Update the correct fragment number
 	return Size;
@@ -427,7 +429,7 @@
 
 
 void
-Mds_DurationSet(  PADAPTER Adapter,  PDESCRIPTOR pDes,  PUCHAR buffer )
+Mds_DurationSet(  PADAPTER Adapter,  PDESCRIPTOR pDes,  u8 *buffer )
 {
 	PT00_DESCRIPTOR	pT00;
 	PT01_DESCRIPTOR	pT01;
@@ -435,7 +437,7 @@
 	u8	Rate, i;
 	unsigned char	CTS_on = FALSE, RTS_on = FALSE;
 	PT00_DESCRIPTOR pNextT00;
-	u16 BodyLen;
+	u16 BodyLen = 0;
 	unsigned char boGroupAddr = FALSE;
 
 
@@ -574,7 +576,7 @@
 							DEFAULT_SIFSTIME*3 );
 			}
 
-			((PUSHORT)buffer)[5] = cpu_to_le16(Duration);// 4 USHOR for skip 8B USB, 2USHORT=FC + Duration
+			((u16 *)buffer)[5] = cpu_to_le16(Duration);// 4 USHOR for skip 8B USB, 2USHORT=FC + Duration
 
 			//----20061009 add by anson's endian
 			pNextT00->value = cpu_to_le32(pNextT00->value);
@@ -615,7 +617,7 @@
 		}
 	}
 
-	((PUSHORT)buffer)[5] = cpu_to_le16(Duration);// 4 USHOR for skip 8B USB, 2USHORT=FC + Duration
+	((u16 *)buffer)[5] = cpu_to_le16(Duration);// 4 USHOR for skip 8B USB, 2USHORT=FC + Duration
 	pT00->value = cpu_to_le32(pT00->value);
 	pT01->value = cpu_to_le32(pT01->value);
 	//--end 20061009 add
diff --git a/drivers/staging/winbond/mds_f.h b/drivers/staging/winbond/mds_f.h
index 651188b..7a682d4 100644
--- a/drivers/staging/winbond/mds_f.h
+++ b/drivers/staging/winbond/mds_f.h
@@ -1,9 +1,9 @@
 unsigned char Mds_initial(  PADAPTER Adapter );
 void Mds_Destroy(  PADAPTER Adapter );
 void Mds_Tx(  PADAPTER Adapter );
-void Mds_HeaderCopy(  PADAPTER Adapter,  PDESCRIPTOR pDes,  PUCHAR TargetBuffer );
-u16 Mds_BodyCopy(  PADAPTER Adapter,  PDESCRIPTOR pDes,  PUCHAR TargetBuffer );
-void Mds_DurationSet(  PADAPTER Adapter,  PDESCRIPTOR pDes,  PUCHAR TargetBuffer );
+void Mds_HeaderCopy(  PADAPTER Adapter,  PDESCRIPTOR pDes,  u8 *TargetBuffer );
+u16 Mds_BodyCopy(  PADAPTER Adapter,  PDESCRIPTOR pDes,  u8 *TargetBuffer );
+void Mds_DurationSet(  PADAPTER Adapter,  PDESCRIPTOR pDes,  u8 *TargetBuffer );
 void Mds_SendComplete(  PADAPTER Adapter,  PT02_DESCRIPTOR pT02 );
 void Mds_MpduProcess(  PADAPTER Adapter,  PDESCRIPTOR pRxDes );
 void Mds_reset_descriptor(  PADAPTER Adapter );
diff --git a/drivers/staging/winbond/mds_s.h b/drivers/staging/winbond/mds_s.h
index 4738279..9df2e09 100644
--- a/drivers/staging/winbond/mds_s.h
+++ b/drivers/staging/winbond/mds_s.h
@@ -86,7 +86,7 @@
 {
 	// For Tx usage
 	u8	TxOwner[ ((MAX_USB_TX_BUFFER_NUMBER + 3) & ~0x03) ];
-	PUCHAR	pTxBuffer;
+	u8	*pTxBuffer;
 	u16	TxBufferSize[ ((MAX_USB_TX_BUFFER_NUMBER + 1) & ~0x01) ];
 	u8	TxDesFrom[ ((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03) ];//931130.4.u // 1: MLME 2: NDIS control 3: NDIS data
 	u8	TxCountInBuffer[ ((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03) ]; // 20060928
@@ -103,7 +103,7 @@
 	u16	TxResult[ ((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01) ];//Collect the sending result of Mpdu
 
 	u8	MicRedundant[8]; // For tmp use
-	PUCHAR	MicWriteAddress[2]; //The start address to fill the Mic, use 2 point due to Mic maybe fragment
+	u8	*MicWriteAddress[2]; //The start address to fill the Mic, use 2 point due to Mic maybe fragment
 
 	u16	MicWriteSize[2]; //931130.4.x
 
@@ -144,7 +144,7 @@
 
 typedef struct _RxBuffer
 {
-    PUCHAR  pBufferAddress;     // Pointer the received data buffer.
+    u8 * pBufferAddress;     // Pointer the received data buffer.
 	u16	BufferSize;
 	u8	RESERVED;
 	u8	BufferIndex;// Only 1 byte
@@ -176,7 +176,7 @@
 	/////////////////////////////////////////////////////////////////////////////////////////////
 	// For brand-new Rx system
 	u8	ReservedBuffer[ 2400 ];//If Buffer ID is reserved one, it must copy the data into this area
-	PUCHAR	ReservedBufferPoint;// Point to the next availabe address of reserved buffer
+	u8	*ReservedBufferPoint;// Point to the next availabe address of reserved buffer
 
 }RXLAYER1, * PRXLAYER1;
 
diff --git a/drivers/staging/winbond/mlme_s.h b/drivers/staging/winbond/mlme_s.h
index 58094f6..039fd40 100644
--- a/drivers/staging/winbond/mlme_s.h
+++ b/drivers/staging/winbond/mlme_s.h
@@ -125,12 +125,12 @@
 typedef struct _MLME_FRAME
 {
 	//NDIS_PACKET		MLME_Packet;
-	PCHAR			pMMPDU;
+	s8 *			pMMPDU;
 	u16			len;
 	u8			DataType;
 	u8			IsInUsed;
 
-	OS_SPIN_LOCK	MLMESpinLock;
+	spinlock_t	MLMESpinLock;
 
     u8		TxMMPDU[MAX_NUM_TX_MMPDU][MAX_MMPDU_SIZE];
 	u8		TxMMPDUInUse[ (MAX_NUM_TX_MMPDU+3) & ~0x03 ];
diff --git a/drivers/staging/winbond/mlmetxrx.c b/drivers/staging/winbond/mlmetxrx.c
index 46b091e..e8533b8d1 100644
--- a/drivers/staging/winbond/mlmetxrx.c
+++ b/drivers/staging/winbond/mlmetxrx.c
@@ -113,13 +113,13 @@
 	pDes->Type = Adapter->sMlmeFrame.DataType;
 }
 
-void MLMEfreeMMPDUBuffer(PWB32_ADAPTER Adapter, PCHAR pData)
+void MLMEfreeMMPDUBuffer(PWB32_ADAPTER Adapter, s8 *pData)
 {
 	int i;
 
 	// Reclaim the data buffer
 	for (i = 0; i < MAX_NUM_TX_MMPDU; i++) {
-		if (pData == (PCHAR)&(Adapter->sMlmeFrame.TxMMPDU[i]))
+		if (pData == (s8 *)&(Adapter->sMlmeFrame.TxMMPDU[i]))
 			break;
 	}
 	if (Adapter->sMlmeFrame.TxMMPDUInUse[i])
diff --git a/drivers/staging/winbond/mlmetxrx_f.h b/drivers/staging/winbond/mlmetxrx_f.h
index d74e225..24cd5f3 100644
--- a/drivers/staging/winbond/mlmetxrx_f.h
+++ b/drivers/staging/winbond/mlmetxrx_f.h
@@ -20,7 +20,7 @@
      PWB32_ADAPTER    Adapter
    );
 
-void MLMEfreeMMPDUBuffer( PWB32_ADAPTER Adapter,  PCHAR pData);
+void MLMEfreeMMPDUBuffer( PWB32_ADAPTER Adapter,  s8 * pData);
 
 void MLME_GetNextPacket(  PADAPTER Adapter,  PDESCRIPTOR pDes );
 u8 MLMESendFrame( PWB32_ADAPTER Adapter,
@@ -42,7 +42,7 @@
 void
 MLMEReturnPacket(
      PWB32_ADAPTER    Adapter,
-     PUCHAR           pRxBufer
+     u8 *          pRxBufer
    );
 #ifdef _IBSS_BEACON_SEQ_STICK_
 s8 SendBCNullData(PWB32_ADAPTER Adapter, u16 wIdx);
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index b475c7a..57af5b8 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -922,16 +922,16 @@
 	// Only unplug and plug again can make hardware read EEPROM again. 20060727
 	Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08000000 ); // Start EEPROM access + Read + address(0x0d)
 	Wb35Reg_ReadSync( pHwData, 0x03b4, &ltmp );
-	*(PUSHORT)pHwData->PermanentMacAddress = cpu_to_le16((u16)ltmp); //20060926 anson's endian
+	*(u16 *)pHwData->PermanentMacAddress = cpu_to_le16((u16)ltmp); //20060926 anson's endian
 	Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08010000 ); // Start EEPROM access + Read + address(0x0d)
 	Wb35Reg_ReadSync( pHwData, 0x03b4, &ltmp );
-	*(PUSHORT)(pHwData->PermanentMacAddress + 2) = cpu_to_le16((u16)ltmp); //20060926 anson's endian
+	*(u16 *)(pHwData->PermanentMacAddress + 2) = cpu_to_le16((u16)ltmp); //20060926 anson's endian
 	Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08020000 ); // Start EEPROM access + Read + address(0x0d)
 	Wb35Reg_ReadSync( pHwData, 0x03b4, &ltmp );
-	*(PUSHORT)(pHwData->PermanentMacAddress + 4) = cpu_to_le16((u16)ltmp); //20060926 anson's endian
-	*(PUSHORT)(pHwData->PermanentMacAddress + 6) = 0;
-	Wb35Reg_WriteSync( pHwData, 0x03e8, cpu_to_le32(*(PULONG)pHwData->PermanentMacAddress) ); //20060926 anson's endian
-	Wb35Reg_WriteSync( pHwData, 0x03ec, cpu_to_le32(*(PULONG)(pHwData->PermanentMacAddress+4)) ); //20060926 anson's endian
+	*(u16 *)(pHwData->PermanentMacAddress + 4) = cpu_to_le16((u16)ltmp); //20060926 anson's endian
+	*(u16 *)(pHwData->PermanentMacAddress + 6) = 0;
+	Wb35Reg_WriteSync( pHwData, 0x03e8, cpu_to_le32(*(u32 *)pHwData->PermanentMacAddress) ); //20060926 anson's endian
+	Wb35Reg_WriteSync( pHwData, 0x03ec, cpu_to_le32(*(u32 *)(pHwData->PermanentMacAddress+4)) ); //20060926 anson's endian
 }
 
 
@@ -1038,7 +1038,7 @@
 RFSynthesizer_initial(phw_data_t pHwData)
 {
 	u32	altmp[32];
-	PULONG	pltmp = altmp;
+	u32 *	pltmp = altmp;
 	u32	ltmp;
 	u8	number=0x00; // The number of register vale
 	u8	i;
@@ -2358,11 +2358,11 @@
 	pltmp[2] = pWb35Reg->M2C_MacControl;
 
 	// M30 BSSID
-	pltmp[3] = *(PULONG)pHwData->bssid;
+	pltmp[3] = *(u32 *)pHwData->bssid;
 
 	// M34
 	pHwData->AID = DEFAULT_AID;
-	tmp = *(PUSHORT)(pHwData->bssid+4);
+	tmp = *(u16 *)(pHwData->bssid+4);
 	tmp |= DEFAULT_AID << 16;
 	pltmp[4] = tmp;
 
@@ -2428,7 +2428,7 @@
 {
 	u32		i, j, ltmp;
 	u16		Value[MAX_TXVGA_EEPROM];
-	PUCHAR		pctmp;
+	u8		*pctmp;
 	u8		ctmp=0;
 
 	// Get the entire TxVga setting in EEPROM
@@ -2441,7 +2441,7 @@
 	}
 
 	// Adjust the filed which fills with reserved value.
-	pctmp = (PUCHAR)Value;
+	pctmp = (u8 *)Value;
 	for( i=0; i<(MAX_TXVGA_EEPROM*2); i++ )
 	{
 		if( pctmp[i] != 0xff )
@@ -2480,7 +2480,7 @@
 // This function will use default TxVgaSettingInEEPROM data to calculate new TxVga.
 void EEPROMTxVgaAdjust(  phw_data_t pHwData ) // 20060619.5 Add
 {
-	PUCHAR		pTxVga = pHwData->TxVgaSettingInEEPROM;
+	u8	*	pTxVga = pHwData->TxVgaSettingInEEPROM;
 	s16		i, stmp;
 
 	//-- 2.4G -- 20060704.2 Request from Tiger
diff --git a/drivers/staging/winbond/sme_api.c b/drivers/staging/winbond/sme_api.c
index 40e93b7..31c9673 100644
--- a/drivers/staging/winbond/sme_api.c
+++ b/drivers/staging/winbond/sme_api.c
@@ -10,4 +10,5 @@
 s8 sme_get_rssi(void *pcore_data, s32 *prssi)
 {
        BUG();
+       return 0;
 }
diff --git a/drivers/staging/winbond/sme_api.h b/drivers/staging/winbond/sme_api.h
index 016b225..745eb37 100644
--- a/drivers/staging/winbond/sme_api.h
+++ b/drivers/staging/winbond/sme_api.h
@@ -208,7 +208,7 @@
 s8 sme_set_IBSS_chan(void *pcore_data, ChanInfo chan);
 
 //20061108 WPS
-s8 sme_set_IE_append(void *pcore_data, PUCHAR buffer, u16 buf_len);
+s8 sme_set_IE_append(void *pcore_data, u8 *buffer, u16 buf_len);
 
 
 
diff --git a/drivers/staging/winbond/wbhal.c b/drivers/staging/winbond/wbhal.c
index daf4422..5d68ece 100644
--- a/drivers/staging/winbond/wbhal.c
+++ b/drivers/staging/winbond/wbhal.c
@@ -1,13 +1,13 @@
 #include "os_common.h"
 
-void hal_get_ethernet_address( phw_data_t pHwData, PUCHAR current_address )
+void hal_get_ethernet_address( phw_data_t pHwData, u8 *current_address )
 {
 	if( pHwData->SurpriseRemove ) return;
 
 	memcpy( current_address, pHwData->CurrentMacAddress, ETH_LENGTH_OF_ADDRESS );
 }
 
-void hal_set_ethernet_address( phw_data_t pHwData, PUCHAR current_address )
+void hal_set_ethernet_address( phw_data_t pHwData, u8 *current_address )
 {
 	u32 ltmp[2];
 
@@ -15,13 +15,13 @@
 
 	memcpy( pHwData->CurrentMacAddress, current_address, ETH_LENGTH_OF_ADDRESS );
 
-	ltmp[0]= cpu_to_le32( *(PULONG)pHwData->CurrentMacAddress );
-	ltmp[1]= cpu_to_le32( *(PULONG)(pHwData->CurrentMacAddress + 4) ) & 0xffff;
+	ltmp[0]= cpu_to_le32( *(u32 *)pHwData->CurrentMacAddress );
+	ltmp[1]= cpu_to_le32( *(u32 *)(pHwData->CurrentMacAddress + 4) ) & 0xffff;
 
 	Wb35Reg_BurstWrite( pHwData, 0x03e8, ltmp, 2, AUTO_INCREMENT );
 }
 
-void hal_get_permanent_address( phw_data_t pHwData, PUCHAR pethernet_address )
+void hal_get_permanent_address( phw_data_t pHwData, u8 *pethernet_address )
 {
 	if( pHwData->SurpriseRemove ) return;
 
@@ -89,7 +89,7 @@
 }
 
 //---------------------------------------------------------------------------------------------------
-void hal_set_rates(phw_data_t pHwData, PUCHAR pbss_rates,
+void hal_set_rates(phw_data_t pHwData, u8 *pbss_rates,
 		   u8 length, unsigned char basic_rate_set)
 {
 	PWB35REG	pWb35Reg = &pHwData->Wb35Reg;
@@ -158,13 +158,13 @@
 	// Fill data into support rate until buffer full
 	//---20060926 add by anson's endian
 	for (i=0; i<4; i++)
-		*(PULONG)(SupportedRate+(i<<2)) = cpu_to_le32( *(PULONG)(SupportedRate+(i<<2)) );
+		*(u32 *)(SupportedRate+(i<<2)) = cpu_to_le32( *(u32 *)(SupportedRate+(i<<2)) );
 	//--- end 20060926 add by anson's endian
-	Wb35Reg_BurstWrite( pHwData,0x087c, (PULONG)SupportedRate, 4, AUTO_INCREMENT );
-	pWb35Reg->M7C_MacControl = ((PULONG)SupportedRate)[0];
-	pWb35Reg->M80_MacControl = ((PULONG)SupportedRate)[1];
-	pWb35Reg->M84_MacControl = ((PULONG)SupportedRate)[2];
-	pWb35Reg->M88_MacControl = ((PULONG)SupportedRate)[3];
+	Wb35Reg_BurstWrite( pHwData,0x087c, (u32 *)SupportedRate, 4, AUTO_INCREMENT );
+	pWb35Reg->M7C_MacControl = ((u32 *)SupportedRate)[0];
+	pWb35Reg->M80_MacControl = ((u32 *)SupportedRate)[1];
+	pWb35Reg->M84_MacControl = ((u32 *)SupportedRate)[2];
+	pWb35Reg->M88_MacControl = ((u32 *)SupportedRate)[3];
 
 	// Fill length
 	tmp = Count1<<28 | Count2<<24;
@@ -206,7 +206,7 @@
 	pWb35Reg->M28_MacControl &= ~0xff; // Clean channel information field
 	pWb35Reg->M28_MacControl |= channel.ChanNo;
 	Wb35Reg_WriteWithCallbackValue( pHwData, 0x0828, pWb35Reg->M28_MacControl,
-					(PCHAR)&channel, sizeof(ChanInfo));
+					(s8 *)&channel, sizeof(ChanInfo));
 }
 //---------------------------------------------------------------------------------------------------
 void hal_set_current_channel(  phw_data_t pHwData,  ChanInfo channel )
@@ -277,7 +277,7 @@
 	Wb35Reg_Write( pHwData, 0x0800, pWb35Reg->M00_MacControl );
 }
 //---------------------------------------------------------------------------------------------------
-void hal_set_multicast_address( phw_data_t pHwData, PUCHAR address, u8 number )
+void hal_set_multicast_address( phw_data_t pHwData, u8 *address, u8 number )
 {
 	PWB35REG	pWb35Reg = &pHwData->Wb35Reg;
 	u8		Byte, Bit;
@@ -297,7 +297,7 @@
 	}
 
 	// Updating register
-	Wb35Reg_BurstWrite( pHwData, 0x0804, (PULONG)pWb35Reg->Multicast, 2, AUTO_INCREMENT );
+	Wb35Reg_BurstWrite( pHwData, 0x0804, (u32 *)pWb35Reg->Multicast, 2, AUTO_INCREMENT );
 }
 //---------------------------------------------------------------------------------------------------
 u8 hal_get_accept_beacon(  phw_data_t pHwData )
@@ -806,7 +806,7 @@
 	}
 }
 
-unsigned char hal_get_dxx_reg(  phw_data_t pHwData,  u16 number,  PULONG pValue )
+unsigned char hal_get_dxx_reg(  phw_data_t pHwData,  u16 number,  u32 * pValue )
 {
 	if( number < 0x1000 )
 		number += 0x1000;
diff --git a/drivers/staging/winbond/wbhal_f.h b/drivers/staging/winbond/wbhal_f.h
index fe25f97..ea9531a 100644
--- a/drivers/staging/winbond/wbhal_f.h
+++ b/drivers/staging/winbond/wbhal_f.h
@@ -16,23 +16,23 @@
 //====================================================================================
 // Function declaration
 //====================================================================================
-void hal_remove_mapping_key(  phw_data_t pHwData,  PUCHAR pmac_addr );
+void hal_remove_mapping_key(  phw_data_t pHwData,  u8 *pmac_addr );
 void hal_remove_default_key(  phw_data_t pHwData,  u32 index );
-unsigned char hal_set_mapping_key(  phw_data_t Adapter,  PUCHAR pmac_addr,  u8 null_key,  u8 wep_on,  PUCHAR ptx_tsc,  PUCHAR prx_tsc,  u8 key_type,  u8 key_len,  PUCHAR pkey_data );
-unsigned char hal_set_default_key(  phw_data_t Adapter,  u8 index,  u8 null_key,  u8 wep_on,  PUCHAR ptx_tsc,  PUCHAR prx_tsc,  u8 key_type,  u8 key_len,  PUCHAR pkey_data );
+unsigned char hal_set_mapping_key(  phw_data_t Adapter,  u8 *pmac_addr,  u8 null_key,  u8 wep_on,  u8 *ptx_tsc,  u8 *prx_tsc,  u8 key_type,  u8 key_len,  u8 *pkey_data );
+unsigned char hal_set_default_key(  phw_data_t Adapter,  u8 index,  u8 null_key,  u8 wep_on,  u8 *ptx_tsc,  u8 *prx_tsc,  u8 key_type,  u8 key_len,  u8 *pkey_data );
 void hal_clear_all_default_key(  phw_data_t pHwData );
 void hal_clear_all_group_key(  phw_data_t pHwData );
 void hal_clear_all_mapping_key(  phw_data_t pHwData );
 void hal_clear_all_key(  phw_data_t pHwData );
-void hal_get_ethernet_address(  phw_data_t pHwData,  PUCHAR current_address );
-void hal_set_ethernet_address(  phw_data_t pHwData,  PUCHAR current_address );
-void hal_get_permanent_address(  phw_data_t pHwData,  PUCHAR pethernet_address );
+void hal_get_ethernet_address(  phw_data_t pHwData,  u8 *current_address );
+void hal_set_ethernet_address(  phw_data_t pHwData,  u8 *current_address );
+void hal_get_permanent_address(  phw_data_t pHwData,  u8 *pethernet_address );
 unsigned char hal_init_hardware(  phw_data_t pHwData,  PADAPTER Adapter );
 void hal_set_power_save_mode(  phw_data_t pHwData,  unsigned char power_save,  unsigned char wakeup,  unsigned char dtim );
-void hal_get_power_save_mode(  phw_data_t pHwData,   PBOOLEAN pin_pwr_save );
+void hal_get_power_save_mode(  phw_data_t pHwData,   u8 *pin_pwr_save );
 void hal_set_slot_time(  phw_data_t pHwData,  u8 type );
 #define hal_set_atim_window( _A, _ATM )
-void hal_set_rates(  phw_data_t pHwData,  PUCHAR pbss_rates,  u8 length,  unsigned char basic_rate_set );
+void hal_set_rates(  phw_data_t pHwData,  u8 *pbss_rates,  u8 length,  unsigned char basic_rate_set );
 #define hal_set_basic_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, TRUE )
 #define hal_set_op_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, FALSE )
 void hal_start_bss(  phw_data_t pHwData,  u8 mac_op_mode );
@@ -40,19 +40,19 @@
 void hal_stop_sync_bss(  phw_data_t pHwData );
 void hal_resume_sync_bss(  phw_data_t pHwData);
 void hal_set_aid(  phw_data_t pHwData,  u16 aid );
-void hal_set_bssid(  phw_data_t pHwData,  PUCHAR pbssid );
-void hal_get_bssid(  phw_data_t pHwData,  PUCHAR pbssid );
+void hal_set_bssid(  phw_data_t pHwData,  u8 *pbssid );
+void hal_get_bssid(  phw_data_t pHwData,  u8 *pbssid );
 void hal_set_beacon_period(  phw_data_t pHwData,  u16 beacon_period );
 void hal_set_listen_interval(  phw_data_t pHwData,  u16 listen_interval );
 void hal_set_cap_info(  phw_data_t pHwData,  u16 capability_info );
-void hal_set_ssid(  phw_data_t pHwData,  PUCHAR pssid,  u8 ssid_len );
+void hal_set_ssid(  phw_data_t pHwData,  u8 *pssid,  u8 ssid_len );
 void hal_set_current_channel(  phw_data_t pHwData,  ChanInfo channel );
 void hal_set_current_channel_ex(  phw_data_t pHwData,  ChanInfo channel );
 void hal_get_current_channel(  phw_data_t pHwData,  ChanInfo *channel );
 void hal_set_accept_broadcast(  phw_data_t pHwData,  u8 enable );
 void hal_set_accept_multicast(  phw_data_t pHwData,  u8 enable );
 void hal_set_accept_beacon(  phw_data_t pHwData,  u8 enable );
-void hal_set_multicast_address(  phw_data_t pHwData,  PUCHAR address,  u8 number );
+void hal_set_multicast_address(  phw_data_t pHwData,  u8 *address,  u8 number );
 u8 hal_get_accept_beacon(  phw_data_t pHwData );
 void hal_stop(  phw_data_t pHwData );
 void hal_halt(  phw_data_t pHwData, void *ppa_data );
@@ -97,7 +97,7 @@
 
 
 void hal_rate_change(  phw_data_t pHwData ); // Notify the HAL rate is changing 20060613.1
-unsigned char hal_get_dxx_reg(  phw_data_t pHwData,  u16 number,  PULONG pValue );
+unsigned char hal_get_dxx_reg(  phw_data_t pHwData,  u16 number,  u32 * pValue );
 unsigned char hal_set_dxx_reg(  phw_data_t pHwData,  u16 number,  u32 value );
 #define hal_get_time_count( _P )	(_P->time_count/10)	// return 100ms count
 #define hal_detect_error( _P )		(_P->WbUsb.DetectCount)
@@ -116,7 +116,7 @@
 #define pa_stall_execution( _A )	//OS_SLEEP( 1 )
 #define hw_get_cxx_reg( _A, _B, _C )
 #define hw_set_cxx_reg( _A, _B, _C )
-#define hw_get_dxx_reg( _A, _B, _C )	hal_get_dxx_reg( _A, _B, (PULONG)_C )
+#define hw_get_dxx_reg( _A, _B, _C )	hal_get_dxx_reg( _A, _B, (u32 *)_C )
 #define hw_set_dxx_reg( _A, _B, _C )	hal_set_dxx_reg( _A, _B, (u32)_C )
 
 
diff --git a/drivers/staging/winbond/wbhal_s.h b/drivers/staging/winbond/wbhal_s.h
index 5b862ff..2ee3f0f 100644
--- a/drivers/staging/winbond/wbhal_s.h
+++ b/drivers/staging/winbond/wbhal_s.h
@@ -461,7 +461,7 @@
 	//=====================================================================
 	// Definition for 802.11
 	//=====================================================================
-	PUCHAR	bssid_pointer; // Used by hal_get_bssid for return value
+	u8	*bssid_pointer; // Used by hal_get_bssid for return value
 	u8	bssid[8];// Only 6 byte will be used. 8 byte is required for read buffer
 	u8	ssid[32];// maximum ssid length is 32 byte
 
@@ -486,7 +486,7 @@
 	u32	CurrentRadioSw; // 20060320.2 0:On 1:Off
 	u32	CurrentRadioHw; // 20060825 0:On 1:Off
 
-	PUCHAR	power_save_point;  // Used by hal_get_power_save_mode for return value
+	u8	*power_save_point;  // Used by hal_get_power_save_mode for return value
 	u8	cwmin;
 	u8	desired_power_save;
 	u8	dtim;// Is running dtim
diff --git a/drivers/staging/winbond/wblinux.c b/drivers/staging/winbond/wblinux.c
index 2eade5a..4ed45e4 100644
--- a/drivers/staging/winbond/wblinux.c
+++ b/drivers/staging/winbond/wblinux.c
@@ -25,11 +25,11 @@
 {
 	PWBLINUX pWbLinux = &Adapter->WbLinux;
 	u32	ltmp;
-	PULONG	pltmp = (PULONG)pAtomic;
-	OS_SPIN_LOCK_ACQUIRED( &pWbLinux->AtomicSpinLock );
+	u32 *	pltmp = (u32 *)pAtomic;
+	spin_lock_irq( &pWbLinux->AtomicSpinLock );
 	(*pltmp)++;
 	ltmp = (*pltmp);
-	OS_SPIN_LOCK_RELEASED( &pWbLinux->AtomicSpinLock );
+	spin_unlock_irq( &pWbLinux->AtomicSpinLock );
 	return ltmp;
 }
 
@@ -38,11 +38,11 @@
 {
 	PWBLINUX pWbLinux = &Adapter->WbLinux;
 	u32	ltmp;
-	PULONG	pltmp = (PULONG)pAtomic;
-	OS_SPIN_LOCK_ACQUIRED( &pWbLinux->AtomicSpinLock );
+	u32 *	pltmp = (u32 *)pAtomic;
+	spin_lock_irq( &pWbLinux->AtomicSpinLock );
 	(*pltmp)--;
 	ltmp = (*pltmp);
-	OS_SPIN_LOCK_RELEASED( &pWbLinux->AtomicSpinLock );
+	spin_unlock_irq( &pWbLinux->AtomicSpinLock );
 	return ltmp;
 }
 
@@ -51,8 +51,8 @@
 {
 	PWBLINUX pWbLinux = &Adapter->WbLinux;
 
-	OS_SPIN_LOCK_ALLOCATE( &pWbLinux->SpinLock );
-	OS_SPIN_LOCK_ALLOCATE( &pWbLinux->AtomicSpinLock );
+	spin_lock_init( &pWbLinux->SpinLock );
+	spin_lock_init( &pWbLinux->AtomicSpinLock );
 	return TRUE;
 }
 
@@ -79,7 +79,6 @@
 WBLINUX_Destroy(PADAPTER Adapter)
 {
 	WBLINUX_stop( Adapter );
-	OS_SPIN_LOCK_FREE( &pWbNdis->SpinLock );
 #ifdef _PE_USB_INI_DUMP_
 	WBDEBUG(("[w35und] unregister_netdev!\n"));
 #endif
@@ -142,119 +141,118 @@
 WbWLanInitialize(PADAPTER Adapter)
 {
 	phw_data_t	pHwData;
-	PUCHAR		pMacAddr, pMacAddr2;
+	u8		*pMacAddr;
+	u8		*pMacAddr2;
 	u32		InitStep = 0;
 	u8		EEPROM_region;
 	u8		HwRadioOff;
 
-	do {
-		//
-		// Setting default value for Linux
-		//
-		Adapter->sLocalPara.region_INF = REGION_AUTO;
-		Adapter->sLocalPara.TxRateMode = RATE_AUTO;
-		psLOCAL->bMacOperationMode = MODE_802_11_BG;	// B/G mode
-		Adapter->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
-		Adapter->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
-		hal_set_phy_type( &Adapter->sHwData, RF_WB_242_1 );
-		Adapter->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
-		psLOCAL->bPreambleMode = AUTO_MODE;
-		Adapter->sLocalPara.RadioOffStatus.boSwRadioOff = FALSE;
-		pHwData = &Adapter->sHwData;
-		hal_set_phy_type( pHwData, RF_DECIDE_BY_INF );
+	//
+	// Setting default value for Linux
+	//
+	Adapter->sLocalPara.region_INF = REGION_AUTO;
+	Adapter->sLocalPara.TxRateMode = RATE_AUTO;
+	psLOCAL->bMacOperationMode = MODE_802_11_BG;	// B/G mode
+	Adapter->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
+	Adapter->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
+	hal_set_phy_type( &Adapter->sHwData, RF_WB_242_1 );
+	Adapter->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
+	psLOCAL->bPreambleMode = AUTO_MODE;
+	Adapter->sLocalPara.RadioOffStatus.boSwRadioOff = FALSE;
+	pHwData = &Adapter->sHwData;
+	hal_set_phy_type( pHwData, RF_DECIDE_BY_INF );
 
-		//
-		// Initial each module and variable
-		//
-		if (!WBLINUX_Initial(Adapter)) {
+	//
+	// Initial each module and variable
+	//
+	if (!WBLINUX_Initial(Adapter)) {
 #ifdef _PE_USB_INI_DUMP_
-			WBDEBUG(("[w35und]WBNDIS initialization failed\n"));
+		WBDEBUG(("[w35und]WBNDIS initialization failed\n"));
 #endif
-			break;
-		}
-
-		// Initial Software variable
-		Adapter->sLocalPara.ShutDowned = FALSE;
-
-		//added by ws for wep key error detection
-		Adapter->sLocalPara.bWepKeyError= FALSE;
-		Adapter->sLocalPara.bToSelfPacketReceived = FALSE;
-		Adapter->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds
-
-		// Initial USB hal
-		InitStep = 1;
-		pHwData = &Adapter->sHwData;
-		if (!hal_init_hardware(pHwData, Adapter))
-			break;
-
-		EEPROM_region = hal_get_region_from_EEPROM( pHwData );
-		if (EEPROM_region != REGION_AUTO)
-			psLOCAL->region = EEPROM_region;
-		else {
-			if (psLOCAL->region_INF != REGION_AUTO)
-				psLOCAL->region = psLOCAL->region_INF;
-			else
-				psLOCAL->region = REGION_USA;	//default setting
-		}
-
-		// Get Software setting flag from hal
-		Adapter->sLocalPara.boAntennaDiversity = FALSE;
-		if (hal_software_set(pHwData) & 0x00000001)
-			Adapter->sLocalPara.boAntennaDiversity = TRUE;
-
-		//
-		// For TS module
-		//
-		InitStep = 2;
-
-		// For MDS module
-		InitStep = 3;
-		Mds_initial(Adapter);
-
-		//=======================================
-		// Initialize the SME, SCAN, MLME, ROAM
-		//=======================================
-		InitStep = 4;
-		InitStep = 5;
-		InitStep = 6;
-
-		// If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
-		pMacAddr = Adapter->sLocalPara.ThisMacAddress;
-		pMacAddr2 = Adapter->sLocalPara.PermanentAddress;
-		hal_get_permanent_address( pHwData, Adapter->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM
-		if (OS_MEMORY_COMPARE(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH )) // Is equal
-		{
-			memcpy( pMacAddr, pMacAddr2, MAC_ADDR_LENGTH );
-		} else {
-			// Set the user define MAC address
-			hal_set_ethernet_address( pHwData, Adapter->sLocalPara.ThisMacAddress );
-		}
-
-		//get current antenna
-		psLOCAL->bAntennaNo = hal_get_antenna_number(pHwData);
-#ifdef _PE_STATE_DUMP_
-		WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo));
-#endif
-		hal_get_hw_radio_off( pHwData );
-
-		// Waiting for HAL setting OK
-		while (!hal_idle(pHwData))
-			OS_SLEEP(10000);
-
-		MTO_Init(Adapter);
-
-		HwRadioOff = hal_get_hw_radio_off( pHwData );
-		psLOCAL->RadioOffStatus.boHwRadioOff = !!HwRadioOff;
-
-		hal_set_radio_mode( pHwData, (unsigned char)(psLOCAL->RadioOffStatus.boSwRadioOff || psLOCAL->RadioOffStatus.boHwRadioOff) );
-
-		hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
-		//set a tx power for reference.....
-//		sme_set_tx_power_level(Adapter, 12);	FIXME?
-		return TRUE;
+		goto error;
 	}
-	while(FALSE);
 
+	// Initial Software variable
+	Adapter->sLocalPara.ShutDowned = FALSE;
+
+	//added by ws for wep key error detection
+	Adapter->sLocalPara.bWepKeyError= FALSE;
+	Adapter->sLocalPara.bToSelfPacketReceived = FALSE;
+	Adapter->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds
+
+	// Initial USB hal
+	InitStep = 1;
+	pHwData = &Adapter->sHwData;
+	if (!hal_init_hardware(pHwData, Adapter))
+		goto error;
+
+	EEPROM_region = hal_get_region_from_EEPROM( pHwData );
+	if (EEPROM_region != REGION_AUTO)
+		psLOCAL->region = EEPROM_region;
+	else {
+		if (psLOCAL->region_INF != REGION_AUTO)
+			psLOCAL->region = psLOCAL->region_INF;
+		else
+			psLOCAL->region = REGION_USA;	//default setting
+	}
+
+	// Get Software setting flag from hal
+	Adapter->sLocalPara.boAntennaDiversity = FALSE;
+	if (hal_software_set(pHwData) & 0x00000001)
+		Adapter->sLocalPara.boAntennaDiversity = TRUE;
+
+	//
+	// For TS module
+	//
+	InitStep = 2;
+
+	// For MDS module
+	InitStep = 3;
+	Mds_initial(Adapter);
+
+	//=======================================
+	// Initialize the SME, SCAN, MLME, ROAM
+	//=======================================
+	InitStep = 4;
+	InitStep = 5;
+	InitStep = 6;
+
+	// If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
+	pMacAddr = Adapter->sLocalPara.ThisMacAddress;
+	pMacAddr2 = Adapter->sLocalPara.PermanentAddress;
+	hal_get_permanent_address( pHwData, Adapter->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM
+	if (OS_MEMORY_COMPARE(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH )) // Is equal
+	{
+		memcpy( pMacAddr, pMacAddr2, MAC_ADDR_LENGTH );
+	} else {
+		// Set the user define MAC address
+		hal_set_ethernet_address( pHwData, Adapter->sLocalPara.ThisMacAddress );
+	}
+
+	//get current antenna
+	psLOCAL->bAntennaNo = hal_get_antenna_number(pHwData);
+#ifdef _PE_STATE_DUMP_
+	WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo));
+#endif
+	hal_get_hw_radio_off( pHwData );
+
+	// Waiting for HAL setting OK
+	while (!hal_idle(pHwData))
+		OS_SLEEP(10000);
+
+	MTO_Init(Adapter);
+
+	HwRadioOff = hal_get_hw_radio_off( pHwData );
+	psLOCAL->RadioOffStatus.boHwRadioOff = !!HwRadioOff;
+
+	hal_set_radio_mode( pHwData, (unsigned char)(psLOCAL->RadioOffStatus.boSwRadioOff || psLOCAL->RadioOffStatus.boHwRadioOff) );
+
+	hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
+	//set a tx power for reference.....
+//	sme_set_tx_power_level(Adapter, 12);	FIXME?
+	return TRUE;
+
+error:
 	switch (InitStep) {
 	case 5:
 	case 4:
diff --git a/drivers/staging/winbond/wblinux_s.h b/drivers/staging/winbond/wblinux_s.h
index 97e9167..fd2bb43 100644
--- a/drivers/staging/winbond/wblinux_s.h
+++ b/drivers/staging/winbond/wblinux_s.h
@@ -24,8 +24,8 @@
 
 typedef struct _WBLINUX
 {
-	OS_SPIN_LOCK	AtomicSpinLock;
-	OS_SPIN_LOCK	SpinLock;
+	spinlock_t	AtomicSpinLock;
+	spinlock_t	SpinLock;
 	u32	shutdown;
 
 	OS_ATOMIC	ThreadCount;
diff --git a/drivers/staging/wlan-ng/Kconfig b/drivers/staging/wlan-ng/Kconfig
index 10b1f0f..2425d86 100644
--- a/drivers/staging/wlan-ng/Kconfig
+++ b/drivers/staging/wlan-ng/Kconfig
@@ -1,6 +1,6 @@
 config PRISM2_USB
 	tristate "Prism2.5 USB driver"
-	depends on USB
+	depends on WLAN_80211 && USB
 	default n
 	---help---
 	  This is the wlan-ng prism 2.5 USB driver for a wide range of
diff --git a/drivers/staging/wlan-ng/hfa384x.h b/drivers/staging/wlan-ng/hfa384x.h
index a205463..0dfb8ce 100644
--- a/drivers/staging/wlan-ng/hfa384x.h
+++ b/drivers/staging/wlan-ng/hfa384x.h
@@ -824,7 +824,7 @@
 #define		HFA384x_CMD_MACPORT_SET(value)		((UINT16)HFA384x_CMD_AINFO_SET(value))
 #define		HFA384x_CMD_ISRECL(value)		((UINT16)(HFA384x_CMD_AINFO_GET((UINT16)(value) & HFA384x_CMD_RECL)))
 #define		HFA384x_CMD_RECL_SET(value)		((UINT16)HFA384x_CMD_AINFO_SET(value))
-#define		HFA384x_CMD_QOS_GET(value)		((UINT16((((UINT16)(value))&((UINT16)0x3000)) >> 12))
+#define		HFA384x_CMD_QOS_GET(value)		((UINT16)((((UINT16)(value))&((UINT16)0x3000)) >> 12))
 #define		HFA384x_CMD_QOS_SET(value)		((UINT16)((((UINT16)(value)) << 12) & 0x3000))
 #define		HFA384x_CMD_ISWRITE(value)		((UINT16)(HFA384x_CMD_AINFO_GET((UINT16)(value) & HFA384x_CMD_WRITE)))
 #define		HFA384x_CMD_WRITE_SET(value)		((UINT16)HFA384x_CMD_AINFO_SET((UINT16)value))
diff --git a/drivers/staging/wlan-ng/p80211wep.c b/drivers/staging/wlan-ng/p80211wep.c
index 53fe298..11a50c7 100644
--- a/drivers/staging/wlan-ng/p80211wep.c
+++ b/drivers/staging/wlan-ng/p80211wep.c
@@ -64,7 +64,6 @@
 /*================================================================*/
 /* Project Includes */
 
-#include "version.h"
 #include "p80211hdr.h"
 #include "p80211types.h"
 #include "p80211msg.h"
diff --git a/drivers/staging/wlan-ng/prism2mib.c b/drivers/staging/wlan-ng/prism2mib.c
index 268fd9b..eac06f7 100644
--- a/drivers/staging/wlan-ng/prism2mib.c
+++ b/drivers/staging/wlan-ng/prism2mib.c
@@ -90,8 +90,6 @@
 #include <linux/usb.h>
 //#endif
 
-#include "wlan_compat.h"
-
 /*================================================================*/
 /* Project Includes */
 
diff --git a/drivers/staging/wlan-ng/wlan_compat.h b/drivers/staging/wlan-ng/wlan_compat.h
index 1702657..59dfa8f 100644
--- a/drivers/staging/wlan-ng/wlan_compat.h
+++ b/drivers/staging/wlan-ng/wlan_compat.h
@@ -245,11 +245,11 @@
 #  define preempt_count() (0UL)
 #endif
 
-#define WLAN_LOG_ERROR(x,args...) printk(KERN_ERR "%s: " x , __FUNCTION__ , ##args);
+#define WLAN_LOG_ERROR(x,args...) printk(KERN_ERR "%s: " x , __func__ , ##args);
 
-#define WLAN_LOG_WARNING(x,args...) printk(KERN_WARNING "%s: " x , __FUNCTION__ , ##args);
+#define WLAN_LOG_WARNING(x,args...) printk(KERN_WARNING "%s: " x , __func__ , ##args);
 
-#define WLAN_LOG_NOTICE(x,args...) printk(KERN_NOTICE "%s: " x , __FUNCTION__ , ##args);
+#define WLAN_LOG_NOTICE(x,args...) printk(KERN_NOTICE "%s: " x , __func__ , ##args);
 
 #define WLAN_LOG_INFO(args... ) printk(KERN_INFO args)
 
@@ -265,7 +265,7 @@
 	#define DBFENTER { if ( WLAN_DBVAR >= 5 ){ WLAN_LOG_DEBUG(3,"---->\n"); } }
 	#define DBFEXIT  { if ( WLAN_DBVAR >= 5 ){ WLAN_LOG_DEBUG(3,"<----\n"); } }
 
-	#define WLAN_LOG_DEBUG(l,x,args...) if ( WLAN_DBVAR >= (l)) printk(KERN_DEBUG "%s(%lu): " x ,  __FUNCTION__, (preempt_count() & PREEMPT_MASK), ##args );
+	#define WLAN_LOG_DEBUG(l,x,args...) if ( WLAN_DBVAR >= (l)) printk(KERN_DEBUG "%s(%lu): " x ,  __func__, (preempt_count() & PREEMPT_MASK), ##args );
 #else
 	#define WLAN_ASSERT(c)
 	#define WLAN_HEX_DUMP( l, s, p, n)
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index bcefbdd..289d81a 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -36,7 +36,8 @@
 	default y if PXA3xx
 	default y if ARCH_EP93XX
 	default y if ARCH_AT91
-	default y if ARCH_PNX4008
+	default y if ARCH_PNX4008 && I2C
+	default y if MFD_TC6393XB
 	# PPC:
 	default y if STB03xxx
 	default y if PPC_MPC52xx
@@ -97,6 +98,8 @@
 
 source "drivers/usb/mon/Kconfig"
 
+source "drivers/usb/wusbcore/Kconfig"
+
 source "drivers/usb/host/Kconfig"
 
 source "drivers/usb/musb/Kconfig"
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index a419c42..8b7c419 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -16,9 +16,12 @@
 obj-$(CONFIG_USB_SL811_HCD)	+= host/
 obj-$(CONFIG_USB_U132_HCD)	+= host/
 obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
+obj-$(CONFIG_USB_HWA_HCD)	+= host/
 
 obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00/
 
+obj-$(CONFIG_USB_WUSB)		+= wusbcore/
+
 obj-$(CONFIG_USB_ACM)		+= class/
 obj-$(CONFIG_USB_PRINTER)	+= class/
 
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 76fce44..3e86240 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -722,6 +722,16 @@
 	flush_scheduled_work();
 }
 
+static int speedtch_pre_reset(struct usb_interface *intf)
+{
+	return 0;
+}
+
+static int speedtch_post_reset(struct usb_interface *intf)
+{
+	return 0;
+}
+
 
 /**********
 **  USB  **
@@ -740,6 +750,8 @@
 	.name		= speedtch_driver_name,
 	.probe		= speedtch_usb_probe,
 	.disconnect	= usbatm_usb_disconnect,
+	.pre_reset	= speedtch_pre_reset,
+	.post_reset	= speedtch_post_reset,
 	.id_table	= speedtch_usb_ids
 };
 
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index fab23ee..20104443 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -849,9 +849,10 @@
 {
 	int i;
 	struct acm_wb *wb;
+	struct usb_device *usb_dev = interface_to_usbdev(acm->control);
 
 	for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) {
-		usb_buffer_free(acm->dev, acm->writesize, wb->buf, wb->dmah);
+		usb_buffer_free(usb_dev, acm->writesize, wb->buf, wb->dmah);
 	}
 }
 
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 7429f70..5a8ecc0 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -42,6 +42,8 @@
 	{ }
 };
 
+MODULE_DEVICE_TABLE (usb, wdm_ids);
+
 #define WDM_MINOR_BASE	176
 
 
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index e935be7..3d7793d 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1610,7 +1610,8 @@
 	status = usb_resume_both(udev);
 	udev->last_busy = jiffies;
 	usb_pm_unlock(udev);
-	do_unbind_rebind(udev, DO_REBIND);
+	if (status == 0)
+		do_unbind_rebind(udev, DO_REBIND);
 
 	/* Now that the device is awake, we can start trying to autosuspend
 	 * it again. */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index d73ce26..9b3f16b 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3504,7 +3504,7 @@
 						USB_INTERFACE_BOUND)
 					rebind = 1;
 			}
-			if (rebind)
+			if (ret == 0 && rebind)
 				usb_rebind_intf(cintf);
 		}
 	}
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index 1ca1c32..e1191b9 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -168,7 +168,7 @@
  * usb_find_endpoint - find a copy of an endpoint descriptor
  * @src: original vector of descriptors
  * @copy: copy of @src
- * @ep: endpoint descriptor found in @src
+ * @match: endpoint descriptor found in @src
  *
  * This returns the copy of the @match descriptor made for @copy.  Its
  * intended use is to help remembering the endpoint descriptor to use
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index bcf375c..caa37c9 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -650,7 +650,7 @@
 	struct pxa27x_request *req;
 
 	req = kzalloc(sizeof *req, gfp_flags);
-	if (!req || !_ep)
+	if (!req)
 		return NULL;
 
 	INIT_LIST_HEAD(&req->queue);
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 48f51b1..00ba06b 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1894,11 +1894,8 @@
 		udc->regs_info = debugfs_create_file("registers", S_IRUGO,
 				s3c2410_udc_debugfs_root,
 				udc, &s3c2410_udc_debugfs_fops);
-		if (IS_ERR(udc->regs_info)) {
-			dev_warn(dev, "debugfs file creation failed %ld\n",
-				 PTR_ERR(udc->regs_info));
-			udc->regs_info = NULL;
-		}
+		if (!udc->regs_info)
+			dev_warn(dev, "debugfs file creation failed\n");
 	}
 
 	dev_dbg(dev, "probe ok\n");
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 228797e..56f592d 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -138,7 +138,6 @@
 	tristate "OHCI HCD support"
 	depends on USB && USB_ARCH_HAS_OHCI
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
-	select I2C if ARCH_PNX4008
 	---help---
 	  The Open Host Controller Interface (OHCI) is a standard for accessing
 	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
@@ -305,3 +304,31 @@
 	help
 	   This driver enables support for the on-chip R8A66597 in the
 	   SH7366 and SH7723 processors.
+
+config USB_WHCI_HCD
+	tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on PCI && USB
+	select USB_WUSB
+	select UWB_WHCI
+	help
+	  A driver for PCI-based Wireless USB Host Controllers that are
+	  compliant with the WHCI specification.
+
+	  To compile this driver a module, choose M here: the module
+	  will be called "whci-hcd".
+
+config USB_HWA_HCD
+	tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on USB
+	select USB_WUSB
+	select UWB_HWA
+	help
+	  This driver enables you to connect Wireless USB devices to
+	  your system using a Host Wire Adaptor USB dongle. This is an
+	  UWB Radio Controller and WUSB Host Controller connected to
+	  your machine via USB (specified in WUSB1.0).
+
+	  To compile this driver a module, choose M here: the module
+	  will be called "hwa-hc".
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index f1edda2..23be222 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -8,6 +8,8 @@
 
 isp1760-objs := isp1760-hcd.o isp1760-if.o
 
+obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
+
 obj-$(CONFIG_PCI)		+= pci-quirks.o
 
 obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
@@ -19,3 +21,4 @@
 obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
 obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o
 obj-$(CONFIG_USB_ISP1760_HCD)	+= isp1760.o
+obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
new file mode 100644
index 0000000..64be4d8
--- /dev/null
+++ b/drivers/usb/host/hwa-hc.c
@@ -0,0 +1,925 @@
+/*
+ * Host Wire Adapter:
+ * Driver glue, HWA-specific functions, bridges to WAHC and WUSBHC
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * The HWA driver is a simple layer that forwards requests to the WAHC
+ * (Wire Adater Host Controller) or WUSBHC (Wireless USB Host
+ * Controller) layers.
+ *
+ * Host Wire Adapter is the 'WUSB 1.0 standard' name for Wireless-USB
+ * Host Controller that is connected to your system via USB (a USB
+ * dongle that implements a USB host...). There is also a Device Wired
+ * Adaptor, DWA (Wireless USB hub) that uses the same mechanism for
+ * transferring data (it is after all a USB host connected via
+ * Wireless USB), we have a common layer called Wire Adapter Host
+ * Controller that does all the hard work. The WUSBHC (Wireless USB
+ * Host Controller) is the part common to WUSB Host Controllers, the
+ * HWA and the PCI-based one, that is implemented following the WHCI
+ * spec. All these layers are implemented in ../wusbcore.
+ *
+ * The main functions are hwahc_op_urb_{en,de}queue(), that pass the
+ * job of converting a URB to a Wire Adapter
+ *
+ * Entry points:
+ *
+ *   hwahc_driver_*()   Driver initialization, registration and
+ *                      teardown.
+ *
+ *   hwahc_probe()	New device came up, create an instance for
+ *                      it [from device enumeration].
+ *
+ *   hwahc_disconnect()	Remove device instance [from device
+ *                      enumeration].
+ *
+ *   [__]hwahc_op_*()   Host-Wire-Adaptor specific functions for
+ *                      starting/stopping/etc (some might be made also
+ *                      DWA).
+ */
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/wait.h>
+#include <linux/completion.h>
+#include "../wusbcore/wa-hc.h"
+#include "../wusbcore/wusbhc.h"
+
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+struct hwahc {
+	struct wusbhc wusbhc;	/* has to be 1st */
+	struct wahc wa;
+	u8 buffer[16];		/* for misc usb transactions */
+};
+
+/**
+ * FIXME should be wusbhc
+ *
+ * NOTE: we need to cache the Cluster ID because later...there is no
+ *       way to get it :)
+ */
+static int __hwahc_set_cluster_id(struct hwahc *hwahc, u8 cluster_id)
+{
+	int result;
+	struct wusbhc *wusbhc = &hwahc->wusbhc;
+	struct wahc *wa = &hwahc->wa;
+	struct device *dev = &wa->usb_iface->dev;
+
+	result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			WUSB_REQ_SET_CLUSTER_ID,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			cluster_id,
+			wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+			NULL, 0, 1000 /* FIXME: arbitrary */);
+	if (result < 0)
+		dev_err(dev, "Cannot set WUSB Cluster ID to 0x%02x: %d\n",
+			cluster_id, result);
+	else
+		wusbhc->cluster_id = cluster_id;
+	dev_info(dev, "Wireless USB Cluster ID set to 0x%02x\n", cluster_id);
+	return result;
+}
+
+static int __hwahc_op_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots)
+{
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
+
+	return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			WUSB_REQ_SET_NUM_DNTS,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			interval << 8 | slots,
+			wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+			NULL, 0, 1000 /* FIXME: arbitrary */);
+}
+
+/*
+ * Reset a WUSB host controller and wait for it to complete doing it.
+ *
+ * @usb_hcd:	Pointer to WUSB Host Controller instance.
+ *
+ */
+static int hwahc_op_reset(struct usb_hcd *usb_hcd)
+{
+	int result;
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct device *dev = &hwahc->wa.usb_iface->dev;
+
+	d_fnstart(4, dev, "(hwahc %p)\n", hwahc);
+	mutex_lock(&wusbhc->mutex);
+	wa_nep_disarm(&hwahc->wa);
+	result = __wa_set_feature(&hwahc->wa, WA_RESET);
+	if (result < 0) {
+		dev_err(dev, "error commanding HC to reset: %d\n", result);
+		goto error_unlock;
+	}
+	d_printf(3, dev, "reset: waiting for device to change state\n");
+	result = __wa_wait_status(&hwahc->wa, WA_STATUS_RESETTING, 0);
+	if (result < 0) {
+		dev_err(dev, "error waiting for HC to reset: %d\n", result);
+		goto error_unlock;
+	}
+error_unlock:
+	mutex_unlock(&wusbhc->mutex);
+	d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result);
+	return result;
+}
+
+/*
+ * FIXME: break this function up
+ */
+static int hwahc_op_start(struct usb_hcd *usb_hcd)
+{
+	u8 addr;
+	int result;
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct device *dev = &hwahc->wa.usb_iface->dev;
+
+	/* Set up a Host Info WUSB Information Element */
+	d_fnstart(4, dev, "(hwahc %p)\n", hwahc);
+	result = -ENOSPC;
+	mutex_lock(&wusbhc->mutex);
+	/* Start the numbering from the top so that the bottom
+	 * range of the unauth addr space is used for devices,
+	 * the top for HCs; use 0xfe - RC# */
+	addr = wusb_cluster_id_get();
+	if (addr == 0)
+		goto error_cluster_id_get;
+	result = __hwahc_set_cluster_id(hwahc, addr);
+	if (result < 0)
+		goto error_set_cluster_id;
+
+	result = wa_nep_arm(&hwahc->wa, GFP_KERNEL);
+	if (result < 0) {
+		dev_err(dev, "cannot listen to notifications: %d\n", result);
+		goto error_stop;
+	}
+	usb_hcd->uses_new_polling = 1;
+	usb_hcd->poll_rh = 1;
+	usb_hcd->state = HC_STATE_RUNNING;
+	result = 0;
+out:
+	mutex_unlock(&wusbhc->mutex);
+	d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result);
+	return result;
+
+error_stop:
+	__wa_stop(&hwahc->wa);
+error_set_cluster_id:
+	wusb_cluster_id_put(wusbhc->cluster_id);
+error_cluster_id_get:
+	goto out;
+
+}
+
+/*
+ * FIXME: break this function up
+ */
+static int __hwahc_op_wusbhc_start(struct wusbhc *wusbhc)
+{
+	int result;
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct device *dev = &hwahc->wa.usb_iface->dev;
+
+	/* Set up a Host Info WUSB Information Element */
+	d_fnstart(4, dev, "(hwahc %p)\n", hwahc);
+	result = -ENOSPC;
+
+	result = __wa_set_feature(&hwahc->wa, WA_ENABLE);
+	if (result < 0) {
+		dev_err(dev, "error commanding HC to start: %d\n", result);
+		goto error_stop;
+	}
+	result = __wa_wait_status(&hwahc->wa, WA_ENABLE, WA_ENABLE);
+	if (result < 0) {
+		dev_err(dev, "error waiting for HC to start: %d\n", result);
+		goto error_stop;
+	}
+	result = 0;
+out:
+	d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result);
+	return result;
+
+error_stop:
+	result = __wa_clear_feature(&hwahc->wa, WA_ENABLE);
+	goto out;
+}
+
+static int hwahc_op_suspend(struct usb_hcd *usb_hcd, pm_message_t msg)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	dev_err(wusbhc->dev, "%s (%p [%p], 0x%lx) UNIMPLEMENTED\n", __func__,
+		usb_hcd, hwahc, *(unsigned long *) &msg);
+	return -ENOSYS;
+}
+
+static int hwahc_op_resume(struct usb_hcd *usb_hcd)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+	dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
+		usb_hcd, hwahc);
+	return -ENOSYS;
+}
+
+static void __hwahc_op_wusbhc_stop(struct wusbhc *wusbhc)
+{
+	int result;
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct device *dev = &hwahc->wa.usb_iface->dev;
+
+	d_fnstart(4, dev, "(hwahc %p)\n", hwahc);
+	/* Nothing for now */
+	d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result);
+	return;
+}
+
+/*
+ * No need to abort pipes, as when this is called, all the children
+ * has been disconnected and that has done it [through
+ * usb_disable_interface() -> usb_disable_endpoint() ->
+ * hwahc_op_ep_disable() - >rpipe_ep_disable()].
+ */
+static void hwahc_op_stop(struct usb_hcd *usb_hcd)
+{
+	int result;
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
+	struct device *dev = &wa->usb_iface->dev;
+
+	d_fnstart(4, dev, "(hwahc %p)\n", hwahc);
+	mutex_lock(&wusbhc->mutex);
+	wusbhc_stop(wusbhc);
+	wa_nep_disarm(&hwahc->wa);
+	result = __wa_stop(&hwahc->wa);
+	wusb_cluster_id_put(wusbhc->cluster_id);
+	mutex_unlock(&wusbhc->mutex);
+	d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result);
+	return;
+}
+
+static int hwahc_op_get_frame_number(struct usb_hcd *usb_hcd)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+	dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
+		usb_hcd, hwahc);
+	return -ENOSYS;
+}
+
+static int hwahc_op_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb,
+				gfp_t gfp)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+	return wa_urb_enqueue(&hwahc->wa, urb->ep, urb, gfp);
+}
+
+static int hwahc_op_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb,
+				int status)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+	return wa_urb_dequeue(&hwahc->wa, urb);
+}
+
+/*
+ * Release resources allocated for an endpoint
+ *
+ * If there is an associated rpipe to this endpoint, go ahead and put it.
+ */
+static void hwahc_op_endpoint_disable(struct usb_hcd *usb_hcd,
+				      struct usb_host_endpoint *ep)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+	rpipe_ep_disable(&hwahc->wa, ep);
+}
+
+/*
+ * Set the UWB MAS allocation for the WUSB cluster
+ *
+ * @stream_index: stream to use (-1 for cancelling the allocation)
+ * @mas: mas bitmap to use
+ */
+static int __hwahc_op_bwa_set(struct wusbhc *wusbhc, s8 stream_index,
+			      const struct uwb_mas_bm *mas)
+{
+	int result;
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
+	struct device *dev = &wa->usb_iface->dev;
+	u8 mas_le[UWB_NUM_MAS/8];
+
+	/* Set the stream index */
+	result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			WUSB_REQ_SET_STREAM_IDX,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			stream_index,
+			wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+			NULL, 0, 1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "Cannot set WUSB stream index: %d\n", result);
+		goto out;
+	}
+	uwb_mas_bm_copy_le(mas_le, mas);
+	/* Set the MAS allocation */
+	result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			WUSB_REQ_SET_WUSB_MAS,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+			mas_le, 32, 1000 /* FIXME: arbitrary */);
+	if (result < 0)
+		dev_err(dev, "Cannot set WUSB MAS allocation: %d\n", result);
+out:
+	return result;
+}
+
+/*
+ * Add an IE to the host's MMC
+ *
+ * @interval:    See WUSB1.0[8.5.3.1]
+ * @repeat_cnt:  See WUSB1.0[8.5.3.1]
+ * @handle:      See WUSB1.0[8.5.3.1]
+ * @wuie:        Pointer to the header of the WUSB IE data to add.
+ *               MUST BE allocated in a kmalloc buffer (no stack or
+ *               vmalloc).
+ *
+ * NOTE: the format of the WUSB IEs for MMCs are different to the
+ *       normal MBOA MAC IEs (IE Id + Length in MBOA MAC vs. Length +
+ *       Id in WUSB IEs). Standards...you gotta love'em.
+ */
+static int __hwahc_op_mmcie_add(struct wusbhc *wusbhc, u8 interval,
+				u8 repeat_cnt, u8 handle,
+				struct wuie_hdr *wuie)
+{
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
+	u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+
+	return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			WUSB_REQ_ADD_MMC_IE,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			interval << 8 | repeat_cnt,
+			handle << 8 | iface_no,
+			wuie, wuie->bLength, 1000 /* FIXME: arbitrary */);
+}
+
+/*
+ * Remove an IE to the host's MMC
+ *
+ * @handle:      See WUSB1.0[8.5.3.1]
+ */
+static int __hwahc_op_mmcie_rm(struct wusbhc *wusbhc, u8 handle)
+{
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
+	u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+	return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			WUSB_REQ_REMOVE_MMC_IE,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			0, handle << 8 | iface_no,
+			NULL, 0, 1000 /* FIXME: arbitrary */);
+}
+
+/*
+ * Update device information for a given fake port
+ *
+ * @port_idx: Fake port to which device is connected (wusbhc index, not
+ *            USB port number).
+ */
+static int __hwahc_op_dev_info_set(struct wusbhc *wusbhc,
+				   struct wusb_dev *wusb_dev)
+{
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
+	u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+	struct hwa_dev_info *dev_info;
+	int ret;
+
+	/* fill out the Device Info buffer and send it */
+	dev_info = kzalloc(sizeof(struct hwa_dev_info), GFP_KERNEL);
+	if (!dev_info)
+		return -ENOMEM;
+	uwb_mas_bm_copy_le(dev_info->bmDeviceAvailability,
+			   &wusb_dev->availability);
+	dev_info->bDeviceAddress = wusb_dev->addr;
+
+	/*
+	 * If the descriptors haven't been read yet, use a default PHY
+	 * rate of 53.3 Mbit/s only.  The correct value will be used
+	 * when this will be called again as part of the
+	 * authentication process (which occurs after the descriptors
+	 * have been read).
+	 */
+	if (wusb_dev->wusb_cap_descr)
+		dev_info->wPHYRates = wusb_dev->wusb_cap_descr->wPHYRates;
+	else
+		dev_info->wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53);
+
+	ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			WUSB_REQ_SET_DEV_INFO,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			0, wusb_dev->port_idx << 8 | iface_no,
+			dev_info, sizeof(struct hwa_dev_info),
+			1000 /* FIXME: arbitrary */);
+	kfree(dev_info);
+	return ret;
+}
+
+/*
+ * Set host's idea of which encryption (and key) method to use when
+ * talking to ad evice on a given port.
+ *
+ * If key is NULL, it means disable encryption for that "virtual port"
+ * (used when we disconnect).
+ */
+static int __hwahc_dev_set_key(struct wusbhc *wusbhc, u8 port_idx, u32 tkid,
+			       const void *key, size_t key_size,
+			       u8 key_idx)
+{
+	int result = -ENOMEM;
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
+	u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+	struct usb_key_descriptor *keyd;
+	size_t keyd_len;
+
+	keyd_len = sizeof(*keyd) + key_size;
+	keyd = kzalloc(keyd_len, GFP_KERNEL);
+	if (keyd == NULL)
+		return -ENOMEM;
+
+	keyd->bLength = keyd_len;
+	keyd->bDescriptorType = USB_DT_KEY;
+	keyd->tTKID[0] = (tkid >>  0) & 0xff;
+	keyd->tTKID[1] = (tkid >>  8) & 0xff;
+	keyd->tTKID[2] = (tkid >> 16) & 0xff;
+	memcpy(keyd->bKeyData, key, key_size);
+
+	result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			USB_REQ_SET_DESCRIPTOR,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			USB_DT_KEY << 8 | key_idx,
+			port_idx << 8 | iface_no,
+			keyd, keyd_len, 1000 /* FIXME: arbitrary */);
+
+	memset(keyd, 0, sizeof(*keyd));	/* clear keys etc. */
+	kfree(keyd);
+	return result;
+}
+
+/*
+ * Set host's idea of which encryption (and key) method to use when
+ * talking to ad evice on a given port.
+ *
+ * If key is NULL, it means disable encryption for that "virtual port"
+ * (used when we disconnect).
+ */
+static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid,
+			      const void *key, size_t key_size)
+{
+	int result = -ENOMEM;
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
+	u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+	u8 encryption_value;
+
+	/* Tell the host which key to use to talk to the device */
+	if (key) {
+		u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_PTK,
+					    WUSB_KEY_INDEX_ORIGINATOR_HOST);
+
+		result = __hwahc_dev_set_key(wusbhc, port_idx, tkid,
+					     key, key_size, key_idx);
+		if (result < 0)
+			goto error_set_key;
+		encryption_value = wusbhc->ccm1_etd->bEncryptionValue;
+	} else {
+		/* FIXME: this should come from wusbhc->etd[UNSECURE].value */
+		encryption_value = 0;
+	}
+
+	/* Set the encryption type for commmunicating with the device */
+	result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			USB_REQ_SET_ENCRYPTION,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			encryption_value, port_idx << 8 | iface_no,
+			NULL, 0, 1000 /* FIXME: arbitrary */);
+	if (result < 0)
+		dev_err(wusbhc->dev, "Can't set host's WUSB encryption for "
+			"port index %u to %s (value %d): %d\n", port_idx,
+			wusb_et_name(wusbhc->ccm1_etd->bEncryptionType),
+			wusbhc->ccm1_etd->bEncryptionValue, result);
+error_set_key:
+	return result;
+}
+
+/*
+ * Set host's GTK key
+ */
+static int __hwahc_op_set_gtk(struct wusbhc *wusbhc, u32 tkid,
+			      const void *key, size_t key_size)
+{
+	u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK,
+				    WUSB_KEY_INDEX_ORIGINATOR_HOST);
+
+	return __hwahc_dev_set_key(wusbhc, 0, tkid, key, key_size, key_idx);
+}
+
+/*
+ * Get the Wire Adapter class-specific descriptor
+ *
+ * NOTE: this descriptor comes with the big bundled configuration
+ *       descriptor that includes the interfaces' and endpoints', so
+ *       we just look for it in the cached copy kept by the USB stack.
+ *
+ * NOTE2: We convert LE fields to CPU order.
+ */
+static int wa_fill_descr(struct wahc *wa)
+{
+	int result;
+	struct device *dev = &wa->usb_iface->dev;
+	char *itr;
+	struct usb_device *usb_dev = wa->usb_dev;
+	struct usb_descriptor_header *hdr;
+	struct usb_wa_descriptor *wa_descr;
+	size_t itr_size, actconfig_idx;
+
+	actconfig_idx = (usb_dev->actconfig - usb_dev->config) /
+			sizeof(usb_dev->config[0]);
+	itr = usb_dev->rawdescriptors[actconfig_idx];
+	itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength);
+	while (itr_size >= sizeof(*hdr)) {
+		hdr = (struct usb_descriptor_header *) itr;
+		d_printf(3, dev, "Extra device descriptor: "
+			 "type %02x/%u bytes @ %zu (%zu left)\n",
+			 hdr->bDescriptorType, hdr->bLength,
+			 (itr - usb_dev->rawdescriptors[actconfig_idx]),
+			 itr_size);
+		if (hdr->bDescriptorType == USB_DT_WIRE_ADAPTER)
+			goto found;
+		itr += hdr->bLength;
+		itr_size -= hdr->bLength;
+	}
+	dev_err(dev, "cannot find Wire Adapter Class descriptor\n");
+	return -ENODEV;
+
+found:
+	result = -EINVAL;
+	if (hdr->bLength > itr_size) {	/* is it available? */
+		dev_err(dev, "incomplete Wire Adapter Class descriptor "
+			"(%zu bytes left, %u needed)\n",
+			itr_size, hdr->bLength);
+		goto error;
+	}
+	if (hdr->bLength < sizeof(*wa->wa_descr)) {
+		dev_err(dev, "short Wire Adapter Class descriptor\n");
+		goto error;
+	}
+	wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr;
+	/* Make LE fields CPU order */
+	wa_descr->bcdWAVersion = le16_to_cpu(wa_descr->bcdWAVersion);
+	wa_descr->wNumRPipes = le16_to_cpu(wa_descr->wNumRPipes);
+	wa_descr->wRPipeMaxBlock = le16_to_cpu(wa_descr->wRPipeMaxBlock);
+	if (wa_descr->bcdWAVersion > 0x0100)
+		dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n",
+			 wa_descr->bcdWAVersion & 0xff00 >> 8,
+			 wa_descr->bcdWAVersion & 0x00ff);
+	result = 0;
+error:
+	return result;
+}
+
+static struct hc_driver hwahc_hc_driver = {
+	.description = "hwa-hcd",
+	.product_desc = "Wireless USB HWA host controller",
+	.hcd_priv_size = sizeof(struct hwahc) - sizeof(struct usb_hcd),
+	.irq = NULL,			/* FIXME */
+	.flags = HCD_USB2,		/* FIXME */
+	.reset = hwahc_op_reset,
+	.start = hwahc_op_start,
+	.pci_suspend = hwahc_op_suspend,
+	.pci_resume = hwahc_op_resume,
+	.stop = hwahc_op_stop,
+	.get_frame_number = hwahc_op_get_frame_number,
+	.urb_enqueue = hwahc_op_urb_enqueue,
+	.urb_dequeue = hwahc_op_urb_dequeue,
+	.endpoint_disable = hwahc_op_endpoint_disable,
+
+	.hub_status_data = wusbhc_rh_status_data,
+	.hub_control = wusbhc_rh_control,
+	.bus_suspend = wusbhc_rh_suspend,
+	.bus_resume = wusbhc_rh_resume,
+	.start_port_reset = wusbhc_rh_start_port_reset,
+};
+
+static int hwahc_security_create(struct hwahc *hwahc)
+{
+	int result;
+	struct wusbhc *wusbhc = &hwahc->wusbhc;
+	struct usb_device *usb_dev = hwahc->wa.usb_dev;
+	struct device *dev = &usb_dev->dev;
+	struct usb_security_descriptor *secd;
+	struct usb_encryption_descriptor *etd;
+	void *itr, *top;
+	size_t itr_size, needed, bytes;
+	u8 index;
+	char buf[64];
+
+	/* Find the host's security descriptors in the config descr bundle */
+	index = (usb_dev->actconfig - usb_dev->config) /
+		sizeof(usb_dev->config[0]);
+	itr = usb_dev->rawdescriptors[index];
+	itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength);
+	top = itr + itr_size;
+	result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index],
+			le16_to_cpu(usb_dev->actconfig->desc.wTotalLength),
+			USB_DT_SECURITY, (void **) &secd);
+	if (result == -1) {
+		dev_warn(dev, "BUG? WUSB host has no security descriptors\n");
+		return 0;
+	}
+	needed = sizeof(*secd);
+	if (top - (void *)secd < needed) {
+		dev_err(dev, "BUG? Not enough data to process security "
+			"descriptor header (%zu bytes left vs %zu needed)\n",
+			top - (void *) secd, needed);
+		return 0;
+	}
+	needed = le16_to_cpu(secd->wTotalLength);
+	if (top - (void *)secd < needed) {
+		dev_err(dev, "BUG? Not enough data to process security "
+			"descriptors (%zu bytes left vs %zu needed)\n",
+			top - (void *) secd, needed);
+		return 0;
+	}
+	/* Walk over the sec descriptors and store CCM1's on wusbhc */
+	itr = (void *) secd + sizeof(*secd);
+	top = (void *) secd + le16_to_cpu(secd->wTotalLength);
+	index = 0;
+	bytes = 0;
+	while (itr < top) {
+		etd = itr;
+		if (top - itr < sizeof(*etd)) {
+			dev_err(dev, "BUG: bad host security descriptor; "
+				"not enough data (%zu vs %zu left)\n",
+				top - itr, sizeof(*etd));
+			break;
+		}
+		if (etd->bLength < sizeof(*etd)) {
+			dev_err(dev, "BUG: bad host encryption descriptor; "
+				"descriptor is too short "
+				"(%zu vs %zu needed)\n",
+				(size_t)etd->bLength, sizeof(*etd));
+			break;
+		}
+		itr += etd->bLength;
+		bytes += snprintf(buf + bytes, sizeof(buf) - bytes,
+				  "%s (0x%02x) ",
+				  wusb_et_name(etd->bEncryptionType),
+				  etd->bEncryptionValue);
+		wusbhc->ccm1_etd = etd;
+	}
+	dev_info(dev, "supported encryption types: %s\n", buf);
+	if (wusbhc->ccm1_etd == NULL) {
+		dev_err(dev, "E: host doesn't support CCM-1 crypto\n");
+		return 0;
+	}
+	/* Pretty print what we support */
+	return 0;
+}
+
+static void hwahc_security_release(struct hwahc *hwahc)
+{
+	/* nothing to do here so far... */
+}
+
+static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface)
+{
+	int result;
+	struct device *dev = &iface->dev;
+	struct wusbhc *wusbhc = &hwahc->wusbhc;
+	struct wahc *wa = &hwahc->wa;
+	struct usb_device *usb_dev = interface_to_usbdev(iface);
+
+	wa->usb_dev = usb_get_dev(usb_dev);	/* bind the USB device */
+	wa->usb_iface = usb_get_intf(iface);
+	wusbhc->dev = dev;
+	wusbhc->uwb_rc = uwb_rc_get_by_grandpa(iface->dev.parent);
+	if (wusbhc->uwb_rc == NULL) {
+		result = -ENODEV;
+		dev_err(dev, "Cannot get associated UWB Host Controller\n");
+		goto error_rc_get;
+	}
+	result = wa_fill_descr(wa);	/* Get the device descriptor */
+	if (result < 0)
+		goto error_fill_descriptor;
+	if (wa->wa_descr->bNumPorts > USB_MAXCHILDREN) {
+		dev_err(dev, "FIXME: USB_MAXCHILDREN too low for WUSB "
+			"adapter (%u ports)\n", wa->wa_descr->bNumPorts);
+		wusbhc->ports_max = USB_MAXCHILDREN;
+	} else {
+		wusbhc->ports_max = wa->wa_descr->bNumPorts;
+	}
+	wusbhc->mmcies_max = wa->wa_descr->bNumMMCIEs;
+	wusbhc->start = __hwahc_op_wusbhc_start;
+	wusbhc->stop = __hwahc_op_wusbhc_stop;
+	wusbhc->mmcie_add = __hwahc_op_mmcie_add;
+	wusbhc->mmcie_rm = __hwahc_op_mmcie_rm;
+	wusbhc->dev_info_set = __hwahc_op_dev_info_set;
+	wusbhc->bwa_set = __hwahc_op_bwa_set;
+	wusbhc->set_num_dnts = __hwahc_op_set_num_dnts;
+	wusbhc->set_ptk = __hwahc_op_set_ptk;
+	wusbhc->set_gtk = __hwahc_op_set_gtk;
+	result = hwahc_security_create(hwahc);
+	if (result < 0) {
+		dev_err(dev, "Can't initialize security: %d\n", result);
+		goto error_security_create;
+	}
+	wa->wusb = wusbhc;	/* FIXME: ugly, need to fix */
+	result = wusbhc_create(&hwahc->wusbhc);
+	if (result < 0) {
+		dev_err(dev, "Can't create WUSB HC structures: %d\n", result);
+		goto error_wusbhc_create;
+	}
+	result = wa_create(&hwahc->wa, iface);
+	if (result < 0)
+		goto error_wa_create;
+	return 0;
+
+error_wa_create:
+	wusbhc_destroy(&hwahc->wusbhc);
+error_wusbhc_create:
+	/* WA Descr fill allocs no resources */
+error_security_create:
+error_fill_descriptor:
+	uwb_rc_put(wusbhc->uwb_rc);
+error_rc_get:
+	usb_put_intf(iface);
+	usb_put_dev(usb_dev);
+	return result;
+}
+
+static void hwahc_destroy(struct hwahc *hwahc)
+{
+	struct wusbhc *wusbhc = &hwahc->wusbhc;
+
+	d_fnstart(1, NULL, "(hwahc %p)\n", hwahc);
+	mutex_lock(&wusbhc->mutex);
+	__wa_destroy(&hwahc->wa);
+	wusbhc_destroy(&hwahc->wusbhc);
+	hwahc_security_release(hwahc);
+	hwahc->wusbhc.dev = NULL;
+	uwb_rc_put(wusbhc->uwb_rc);
+	usb_put_intf(hwahc->wa.usb_iface);
+	usb_put_dev(hwahc->wa.usb_dev);
+	mutex_unlock(&wusbhc->mutex);
+	d_fnend(1, NULL, "(hwahc %p) = void\n", hwahc);
+}
+
+static void hwahc_init(struct hwahc *hwahc)
+{
+	wa_init(&hwahc->wa);
+}
+
+static int hwahc_probe(struct usb_interface *usb_iface,
+		       const struct usb_device_id *id)
+{
+	int result;
+	struct usb_hcd *usb_hcd;
+	struct wusbhc *wusbhc;
+	struct hwahc *hwahc;
+	struct device *dev = &usb_iface->dev;
+
+	d_fnstart(4, dev, "(%p, %p)\n", usb_iface, id);
+	result = -ENOMEM;
+	usb_hcd = usb_create_hcd(&hwahc_hc_driver, &usb_iface->dev, "wusb-hwa");
+	if (usb_hcd == NULL) {
+		dev_err(dev, "unable to allocate instance\n");
+		goto error_alloc;
+	}
+	usb_hcd->wireless = 1;
+	usb_hcd->flags |= HCD_FLAG_SAW_IRQ;
+	wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	hwahc_init(hwahc);
+	result = hwahc_create(hwahc, usb_iface);
+	if (result < 0) {
+		dev_err(dev, "Cannot initialize internals: %d\n", result);
+		goto error_hwahc_create;
+	}
+	result = usb_add_hcd(usb_hcd, 0, 0);
+	if (result < 0) {
+		dev_err(dev, "Cannot add HCD: %d\n", result);
+		goto error_add_hcd;
+	}
+	result = wusbhc_b_create(&hwahc->wusbhc);
+	if (result < 0) {
+		dev_err(dev, "Cannot setup phase B of WUSBHC: %d\n", result);
+		goto error_wusbhc_b_create;
+	}
+	d_fnend(4, dev, "(%p, %p) = 0\n", usb_iface, id);
+	return 0;
+
+error_wusbhc_b_create:
+	usb_remove_hcd(usb_hcd);
+error_add_hcd:
+	hwahc_destroy(hwahc);
+error_hwahc_create:
+	usb_put_hcd(usb_hcd);
+error_alloc:
+	d_fnend(4, dev, "(%p, %p) = %d\n", usb_iface, id, result);
+	return result;
+}
+
+static void hwahc_disconnect(struct usb_interface *usb_iface)
+{
+	struct usb_hcd *usb_hcd;
+	struct wusbhc *wusbhc;
+	struct hwahc *hwahc;
+
+	usb_hcd = usb_get_intfdata(usb_iface);
+	wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+	d_fnstart(1, NULL, "(hwahc %p [usb_iface %p])\n", hwahc, usb_iface);
+	wusbhc_b_destroy(&hwahc->wusbhc);
+	usb_remove_hcd(usb_hcd);
+	hwahc_destroy(hwahc);
+	usb_put_hcd(usb_hcd);
+	d_fnend(1, NULL, "(hwahc %p [usb_iface %p]) = void\n", hwahc,
+		usb_iface);
+}
+
+/** USB device ID's that we handle */
+static struct usb_device_id hwahc_id_table[] = {
+	/* FIXME: use class labels for this */
+	{ USB_INTERFACE_INFO(0xe0, 0x02, 0x01), },
+	{},
+};
+MODULE_DEVICE_TABLE(usb, hwahc_id_table);
+
+static struct usb_driver hwahc_driver = {
+	.name =		"hwa-hc",
+	.probe =	hwahc_probe,
+	.disconnect =	hwahc_disconnect,
+	.id_table =	hwahc_id_table,
+};
+
+static int __init hwahc_driver_init(void)
+{
+	int result;
+	result = usb_register(&hwahc_driver);
+	if (result < 0) {
+		printk(KERN_ERR "WA-CDS: Cannot register USB driver: %d\n",
+		       result);
+		goto error_usb_register;
+	}
+	return 0;
+
+error_usb_register:
+	return result;
+
+}
+module_init(hwahc_driver_init);
+
+static void __exit hwahc_driver_exit(void)
+{
+	usb_deregister(&hwahc_driver);
+}
+module_exit(hwahc_driver_exit);
+
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Host Wired Adapter USB Host Control Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 8647dab..8aa3f45 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1075,12 +1075,18 @@
 #define SM501_OHCI_DRIVER	ohci_hcd_sm501_driver
 #endif
 
+#ifdef CONFIG_MFD_TC6393XB
+#include "ohci-tmio.c"
+#define TMIO_OHCI_DRIVER	ohci_hcd_tmio_driver
+#endif
+
 #if	!defined(PCI_DRIVER) &&		\
 	!defined(PLATFORM_DRIVER) &&	\
 	!defined(OF_PLATFORM_DRIVER) &&	\
 	!defined(SA1111_DRIVER) &&	\
 	!defined(PS3_SYSTEM_BUS_DRIVER) && \
 	!defined(SM501_OHCI_DRIVER) && \
+	!defined(TMIO_OHCI_DRIVER) && \
 	!defined(SSB_OHCI_DRIVER)
 #error "missing bus glue for ohci-hcd"
 #endif
@@ -1147,13 +1153,25 @@
 		goto error_sm501;
 #endif
 
+#ifdef TMIO_OHCI_DRIVER
+	retval = platform_driver_register(&TMIO_OHCI_DRIVER);
+	if (retval < 0)
+		goto error_tmio;
+#endif
+
 	return retval;
 
 	/* Error path */
+#ifdef TMIO_OHCI_DRIVER
+	platform_driver_unregister(&TMIO_OHCI_DRIVER);
+ error_tmio:
+#endif
 #ifdef SM501_OHCI_DRIVER
+	platform_driver_unregister(&SM501_OHCI_DRIVER);
  error_sm501:
 #endif
 #ifdef SSB_OHCI_DRIVER
+	ssb_driver_unregister(&SSB_OHCI_DRIVER);
  error_ssb:
 #endif
 #ifdef PCI_DRIVER
@@ -1189,6 +1207,9 @@
 
 static void __exit ohci_hcd_mod_exit(void)
 {
+#ifdef TMIO_OHCI_DRIVER
+	platform_driver_unregister(&TMIO_OHCI_DRIVER);
+#endif
 #ifdef SM501_OHCI_DRIVER
 	platform_driver_unregister(&SM501_OHCI_DRIVER);
 #endif
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
new file mode 100644
index 0000000..f9f134a
--- /dev/null
+++ b/drivers/usb/host/ohci-tmio.c
@@ -0,0 +1,376 @@
+/*
+ * OHCI HCD(Host Controller Driver) for USB.
+ *
+ *(C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ *(C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ *(C) Copyright 2002 Hewlett-Packard Company
+ *
+ * Bus glue for Toshiba Mobile IO(TMIO) Controller's OHCI core
+ * (C) Copyright 2005 Chris Humbert <mahadri-usb@drigon.com>
+ * (C) Copyright 2007, 2008 Dmitry Baryshkov <dbaryshkov@gmail.com>
+ *
+ * This is known to work with the following variants:
+ *	TC6393XB revision 3	(32kB SRAM)
+ *
+ * The TMIO's OHCI core DMAs through a small internal buffer that
+ * is directly addressable by the CPU.
+ *
+ * Written from sparse documentation from Toshiba and Sharp's driver
+ * for the 2.4 kernel,
+ *	usb-ohci-tc6393.c(C) Copyright 2004 Lineo Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*#include <linux/fs.h>
+#include <linux/mount.h>
+#include <linux/pagemap.h>
+#include <linux/init.h>
+#include <linux/namei.h>
+#include <linux/sched.h>*/
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/dma-mapping.h>
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * USB Host Controller Configuration Register
+ */
+#define CCR_REVID	0x08	/* b Revision ID				*/
+#define CCR_BASE	0x10	/* l USB Control Register Base Address Low	*/
+#define CCR_ILME	0x40	/* b Internal Local Memory Enable		*/
+#define CCR_PM		0x4c	/* w Power Management			*/
+#define CCR_INTC	0x50	/* b INT Control				*/
+#define CCR_LMW1L	0x54	/* w Local Memory Window 1 LMADRS Low	*/
+#define CCR_LMW1H	0x56	/* w Local Memory Window 1 LMADRS High	*/
+#define CCR_LMW1BL	0x58	/* w Local Memory Window 1 Base Address Low	*/
+#define CCR_LMW1BH	0x5A	/* w Local Memory Window 1 Base Address High	*/
+#define CCR_LMW2L	0x5C	/* w Local Memory Window 2 LMADRS Low	*/
+#define CCR_LMW2H	0x5E	/* w Local Memory Window 2 LMADRS High	*/
+#define CCR_LMW2BL	0x60	/* w Local Memory Window 2 Base Address Low	*/
+#define CCR_LMW2BH	0x62	/* w Local Memory Window 2 Base Address High	*/
+#define CCR_MISC	0xFC	/* b MISC					*/
+
+#define CCR_PM_GKEN      0x0001
+#define CCR_PM_CKRNEN    0x0002
+#define CCR_PM_USBPW1    0x0004
+#define CCR_PM_USBPW2    0x0008
+#define CCR_PM_USBPW3    0x0008
+#define CCR_PM_PMEE      0x0100
+#define CCR_PM_PMES      0x8000
+
+/*-------------------------------------------------------------------------*/
+
+struct tmio_hcd {
+	void __iomem		*ccr;
+	spinlock_t		lock; /* protects RMW cycles */
+};
+
+#define hcd_to_tmio(hcd)	((struct tmio_hcd *)(hcd_to_ohci(hcd) + 1))
+
+/*-------------------------------------------------------------------------*/
+
+static void tmio_write_pm(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct tmio_hcd *tmio = hcd_to_tmio(hcd);
+	u16 pm;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tmio->lock, flags);
+
+	pm = CCR_PM_GKEN | CCR_PM_CKRNEN |
+	     CCR_PM_PMEE | CCR_PM_PMES;
+
+	tmio_iowrite16(pm, tmio->ccr + CCR_PM);
+	spin_unlock_irqrestore(&tmio->lock, flags);
+}
+
+static void tmio_stop_hc(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	struct tmio_hcd *tmio = hcd_to_tmio(hcd);
+	u16 pm;
+
+	pm = CCR_PM_GKEN | CCR_PM_CKRNEN;
+	switch (ohci->num_ports) {
+		default:
+			dev_err(&dev->dev, "Unsupported amount of ports: %d\n", ohci->num_ports);
+		case 3:
+			pm |= CCR_PM_USBPW3;
+		case 2:
+			pm |= CCR_PM_USBPW2;
+		case 1:
+			pm |= CCR_PM_USBPW1;
+	}
+	tmio_iowrite8(0, tmio->ccr + CCR_INTC);
+	tmio_iowrite8(0, tmio->ccr + CCR_ILME);
+	tmio_iowrite16(0, tmio->ccr + CCR_BASE);
+	tmio_iowrite16(0, tmio->ccr + CCR_BASE + 2);
+	tmio_iowrite16(pm, tmio->ccr + CCR_PM);
+}
+
+static void tmio_start_hc(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct tmio_hcd *tmio = hcd_to_tmio(hcd);
+	unsigned long base = hcd->rsrc_start;
+
+	tmio_write_pm(dev);
+	tmio_iowrite16(base, tmio->ccr + CCR_BASE);
+	tmio_iowrite16(base >> 16, tmio->ccr + CCR_BASE + 2);
+	tmio_iowrite8(1, tmio->ccr + CCR_ILME);
+	tmio_iowrite8(2, tmio->ccr + CCR_INTC);
+
+	dev_info(&dev->dev, "revision %d @ 0x%08llx, irq %d\n",
+			tmio_ioread8(tmio->ccr + CCR_REVID), hcd->rsrc_start, hcd->irq);
+}
+
+static int ohci_tmio_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	int ret;
+
+	if ((ret = ohci_init(ohci)) < 0)
+		return ret;
+
+	if ((ret = ohci_run(ohci)) < 0) {
+		err("can't start %s", hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct hc_driver ohci_tmio_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"TMIO OHCI USB Host Controller",
+	.hcd_priv_size =	sizeof(struct ohci_hcd) + sizeof (struct tmio_hcd),
+
+	/* generic hardware linkage */
+	.irq =			ohci_irq,
+	.flags =		HCD_USB11 | HCD_MEMORY | HCD_LOCAL_MEM,
+
+	/* basic lifecycle operations */
+	.start =		ohci_tmio_start,
+	.stop =			ohci_stop,
+	.shutdown =		ohci_shutdown,
+
+	/* managing i/o requests and associated device resources */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/* scheduling support */
+	.get_frame_number =	ohci_get_frame,
+
+	/* root hub support */
+	.hub_status_data =	ohci_hub_status_data,
+	.hub_control =		ohci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend =		ohci_bus_suspend,
+	.bus_resume =		ohci_bus_resume,
+#endif
+	.start_port_reset =	ohci_start_port_reset,
+};
+
+/*-------------------------------------------------------------------------*/
+static struct platform_driver ohci_hcd_tmio_driver;
+
+static int __devinit ohci_hcd_tmio_drv_probe(struct platform_device *dev)
+{
+	struct mfd_cell *cell = dev->dev.platform_data;
+	struct resource *regs = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	struct resource *config = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	struct resource *sram = platform_get_resource(dev, IORESOURCE_MEM, 2);
+	int irq = platform_get_irq(dev, 0);
+	struct tmio_hcd *tmio;
+	struct ohci_hcd *ohci;
+	struct usb_hcd *hcd;
+	int ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	if (!cell)
+		return -EINVAL;
+
+	hcd = usb_create_hcd(&ohci_tmio_hc_driver, &dev->dev, dev->dev.bus_id);
+	if (!hcd) {
+		ret = -ENOMEM;
+		goto err_usb_create_hcd;
+	}
+
+	hcd->rsrc_start = regs->start;
+	hcd->rsrc_len = regs->end - regs->start + 1;
+
+	tmio = hcd_to_tmio(hcd);
+
+	spin_lock_init(&tmio->lock);
+
+	tmio->ccr = ioremap(config->start, config->end - config->start + 1);
+	if (!tmio->ccr) {
+		ret = -ENOMEM;
+		goto err_ioremap_ccr;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		ret = -ENOMEM;
+		goto err_ioremap_regs;
+	}
+
+	if (!dma_declare_coherent_memory(&dev->dev, sram->start,
+				sram->start,
+				sram->end - sram->start + 1,
+				DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE)) {
+		ret = -EBUSY;
+		goto err_dma_declare;
+	}
+
+	if (cell->enable) {
+		ret = cell->enable(dev);
+		if (ret)
+			goto err_enable;
+	}
+
+	tmio_start_hc(dev);
+	ohci = hcd_to_ohci(hcd);
+	ohci_hcd_init(ohci);
+
+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	if (ret)
+		goto err_add_hcd;
+
+	if (ret == 0)
+		return ret;
+
+	usb_remove_hcd(hcd);
+
+err_add_hcd:
+	tmio_stop_hc(dev);
+	if (cell->disable)
+		cell->disable(dev);
+err_enable:
+	dma_release_declared_memory(&dev->dev);
+err_dma_declare:
+	iounmap(hcd->regs);
+err_ioremap_regs:
+	iounmap(tmio->ccr);
+err_ioremap_ccr:
+	usb_put_hcd(hcd);
+err_usb_create_hcd:
+
+	return ret;
+}
+
+static int __devexit ohci_hcd_tmio_drv_remove(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct tmio_hcd *tmio = hcd_to_tmio(hcd);
+	struct mfd_cell *cell = dev->dev.platform_data;
+
+	usb_remove_hcd(hcd);
+	tmio_stop_hc(dev);
+	if (cell->disable)
+		cell->disable(dev);
+	dma_release_declared_memory(&dev->dev);
+	iounmap(hcd->regs);
+	iounmap(tmio->ccr);
+	usb_put_hcd(hcd);
+
+	platform_set_drvdata(dev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ohci_hcd_tmio_drv_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct mfd_cell *cell = dev->dev.platform_data;
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	struct tmio_hcd *tmio = hcd_to_tmio(hcd);
+	unsigned long flags;
+	u8 misc;
+	int ret;
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	spin_lock_irqsave(&tmio->lock, flags);
+
+	misc = tmio_ioread8(tmio->ccr + CCR_MISC);
+	misc |= 1 << 3; /* USSUSP */
+	tmio_iowrite8(misc, tmio->ccr + CCR_MISC);
+
+	spin_unlock_irqrestore(&tmio->lock, flags);
+
+	if (cell->suspend) {
+		ret = cell->suspend(dev);
+		if (ret)
+			return ret;
+	}
+
+	hcd->state = HC_STATE_SUSPENDED;
+
+	return 0;
+}
+
+static int ohci_hcd_tmio_drv_resume(struct platform_device *dev)
+{
+	struct mfd_cell *cell = dev->dev.platform_data;
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	struct tmio_hcd *tmio = hcd_to_tmio(hcd);
+	unsigned long flags;
+	u8 misc;
+	int ret;
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	if (cell->resume) {
+		ret = cell->resume(dev);
+		if (ret)
+			return ret;
+	}
+
+	tmio_start_hc(dev);
+
+	spin_lock_irqsave(&tmio->lock, flags);
+
+	misc = tmio_ioread8(tmio->ccr + CCR_MISC);
+	misc &= ~(1 << 3); /* USSUSP */
+	tmio_iowrite8(misc, tmio->ccr + CCR_MISC);
+
+	spin_unlock_irqrestore(&tmio->lock, flags);
+
+	ohci_finish_controller_resume(hcd);
+
+	return 0;
+}
+#else
+#define ohci_hcd_tmio_drv_suspend NULL
+#define ohci_hcd_tmio_drv_resume NULL
+#endif
+
+static struct platform_driver ohci_hcd_tmio_driver = {
+	.probe		= ohci_hcd_tmio_drv_probe,
+	.remove		= __devexit_p(ohci_hcd_tmio_drv_remove),
+	.shutdown	= usb_hcd_platform_shutdown,
+	.suspend	= ohci_hcd_tmio_drv_suspend,
+	.resume		= ohci_hcd_tmio_drv_resume,
+	.driver		= {
+		.name	= "tmio-ohci",
+		.owner	= THIS_MODULE,
+	},
+};
diff --git a/drivers/usb/host/whci/Kbuild b/drivers/usb/host/whci/Kbuild
new file mode 100644
index 0000000..26a3871
--- /dev/null
+++ b/drivers/usb/host/whci/Kbuild
@@ -0,0 +1,11 @@
+obj-$(CONFIG_USB_WHCI_HCD) += whci-hcd.o
+
+whci-hcd-y := \
+	asl.o	\
+	hcd.o 	\
+	hw.o	\
+	init.o	\
+	int.o	\
+	pzl.o	\
+	qset.o	\
+	wusb.o
diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c
new file mode 100644
index 0000000..4d7078e5
--- /dev/null
+++ b/drivers/usb/host/whci/asl.c
@@ -0,0 +1,367 @@
+/*
+ * Wireless Host Controller (WHC) asynchronous schedule management.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/uwb/umc.h>
+#include <linux/usb.h>
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+#include "../../wusbcore/wusbhc.h"
+
+#include "whcd.h"
+
+#if D_LOCAL >= 4
+static void dump_asl(struct whc *whc, const char *tag)
+{
+	struct device *dev = &whc->umc->dev;
+	struct whc_qset *qset;
+
+	d_printf(4, dev, "ASL %s\n", tag);
+
+	list_for_each_entry(qset, &whc->async_list, list_node) {
+		dump_qset(qset, dev);
+	}
+}
+#else
+static inline void dump_asl(struct whc *whc, const char *tag)
+{
+}
+#endif
+
+
+static void qset_get_next_prev(struct whc *whc, struct whc_qset *qset,
+			       struct whc_qset **next, struct whc_qset **prev)
+{
+	struct list_head *n, *p;
+
+	BUG_ON(list_empty(&whc->async_list));
+
+	n = qset->list_node.next;
+	if (n == &whc->async_list)
+		n = n->next;
+	p = qset->list_node.prev;
+	if (p == &whc->async_list)
+		p = p->prev;
+
+	*next = container_of(n, struct whc_qset, list_node);
+	*prev = container_of(p, struct whc_qset, list_node);
+
+}
+
+static void asl_qset_insert_begin(struct whc *whc, struct whc_qset *qset)
+{
+	list_move(&qset->list_node, &whc->async_list);
+	qset->in_sw_list = true;
+}
+
+static void asl_qset_insert(struct whc *whc, struct whc_qset *qset)
+{
+	struct whc_qset *next, *prev;
+
+	qset_clear(whc, qset);
+
+	/* Link into ASL. */
+	qset_get_next_prev(whc, qset, &next, &prev);
+	whc_qset_set_link_ptr(&qset->qh.link, next->qset_dma);
+	whc_qset_set_link_ptr(&prev->qh.link, qset->qset_dma);
+	qset->in_hw_list = true;
+}
+
+static void asl_qset_remove(struct whc *whc, struct whc_qset *qset)
+{
+	struct whc_qset *prev, *next;
+
+	qset_get_next_prev(whc, qset, &next, &prev);
+
+	list_move(&qset->list_node, &whc->async_removed_list);
+	qset->in_sw_list = false;
+
+	/*
+	 * No more qsets in the ASL?  The caller must stop the ASL as
+	 * it's no longer valid.
+	 */
+	if (list_empty(&whc->async_list))
+		return;
+
+	/* Remove from ASL. */
+	whc_qset_set_link_ptr(&prev->qh.link, next->qset_dma);
+	qset->in_hw_list = false;
+}
+
+/**
+ * process_qset - process any recently inactivated or halted qTDs in a
+ * qset.
+ *
+ * After inactive qTDs are removed, new qTDs can be added if the
+ * urb queue still contains URBs.
+ *
+ * Returns any additional WUSBCMD bits for the ASL sync command (i.e.,
+ * WUSBCMD_ASYNC_QSET_RM if a halted qset was removed).
+ */
+static uint32_t process_qset(struct whc *whc, struct whc_qset *qset)
+{
+	enum whc_update update = 0;
+	uint32_t status = 0;
+
+	while (qset->ntds) {
+		struct whc_qtd *td;
+		int t;
+
+		t = qset->td_start;
+		td = &qset->qtd[qset->td_start];
+		status = le32_to_cpu(td->status);
+
+		/*
+		 * Nothing to do with a still active qTD.
+		 */
+		if (status & QTD_STS_ACTIVE)
+			break;
+
+		if (status & QTD_STS_HALTED) {
+			/* Ug, an error. */
+			process_halted_qtd(whc, qset, td);
+			goto done;
+		}
+
+		/* Mmm, a completed qTD. */
+		process_inactive_qtd(whc, qset, td);
+	}
+
+	update |= qset_add_qtds(whc, qset);
+
+done:
+	/*
+	 * Remove this qset from the ASL if requested, but only if has
+	 * no qTDs.
+	 */
+	if (qset->remove && qset->ntds == 0) {
+		asl_qset_remove(whc, qset);
+		update |= WHC_UPDATE_REMOVED;
+	}
+	return update;
+}
+
+void asl_start(struct whc *whc)
+{
+	struct whc_qset *qset;
+
+	qset = list_first_entry(&whc->async_list, struct whc_qset, list_node);
+
+	le_writeq(qset->qset_dma | QH_LINK_NTDS(8), whc->base + WUSBASYNCLISTADDR);
+
+	whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, WUSBCMD_ASYNC_EN);
+	whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
+		      WUSBSTS_ASYNC_SCHED, WUSBSTS_ASYNC_SCHED,
+		      1000, "start ASL");
+}
+
+void asl_stop(struct whc *whc)
+{
+	whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, 0);
+	whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
+		      WUSBSTS_ASYNC_SCHED, 0,
+		      1000, "stop ASL");
+}
+
+void asl_update(struct whc *whc, uint32_t wusbcmd)
+{
+	whc_write_wusbcmd(whc, wusbcmd, wusbcmd);
+	wait_event(whc->async_list_wq,
+		   (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0);
+}
+
+/**
+ * scan_async_work - scan the ASL for qsets to process.
+ *
+ * Process each qset in the ASL in turn and then signal the WHC that
+ * the ASL has been updated.
+ *
+ * Then start, stop or update the asynchronous schedule as required.
+ */
+void scan_async_work(struct work_struct *work)
+{
+	struct whc *whc = container_of(work, struct whc, async_work);
+	struct whc_qset *qset, *t;
+	enum whc_update update = 0;
+
+	spin_lock_irq(&whc->lock);
+
+	dump_asl(whc, "before processing");
+
+	/*
+	 * Transerve the software list backwards so new qsets can be
+	 * safely inserted into the ASL without making it non-circular.
+	 */
+	list_for_each_entry_safe_reverse(qset, t, &whc->async_list, list_node) {
+		if (!qset->in_hw_list) {
+			asl_qset_insert(whc, qset);
+			update |= WHC_UPDATE_ADDED;
+		}
+
+		update |= process_qset(whc, qset);
+	}
+
+	dump_asl(whc, "after processing");
+
+	spin_unlock_irq(&whc->lock);
+
+	if (update) {
+		uint32_t wusbcmd = WUSBCMD_ASYNC_UPDATED | WUSBCMD_ASYNC_SYNCED_DB;
+		if (update & WHC_UPDATE_REMOVED)
+			wusbcmd |= WUSBCMD_ASYNC_QSET_RM;
+		asl_update(whc, wusbcmd);
+	}
+
+	/*
+	 * Now that the ASL is updated, complete the removal of any
+	 * removed qsets.
+	 */
+	spin_lock(&whc->lock);
+
+	list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) {
+		qset_remove_complete(whc, qset);
+	}
+
+	spin_unlock(&whc->lock);
+}
+
+/**
+ * asl_urb_enqueue - queue an URB onto the asynchronous list (ASL).
+ * @whc: the WHCI host controller
+ * @urb: the URB to enqueue
+ * @mem_flags: flags for any memory allocations
+ *
+ * The qset for the endpoint is obtained and the urb queued on to it.
+ *
+ * Work is scheduled to update the hardware's view of the ASL.
+ */
+int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags)
+{
+	struct whc_qset *qset;
+	int err;
+	unsigned long flags;
+
+	spin_lock_irqsave(&whc->lock, flags);
+
+	qset = get_qset(whc, urb, GFP_ATOMIC);
+	if (qset == NULL)
+		err = -ENOMEM;
+	else
+		err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
+	if (!err) {
+		usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+		if (!qset->in_sw_list)
+			asl_qset_insert_begin(whc, qset);
+	}
+
+	spin_unlock_irqrestore(&whc->lock, flags);
+
+	if (!err)
+		queue_work(whc->workqueue, &whc->async_work);
+
+	return 0;
+}
+
+/**
+ * asl_urb_dequeue - remove an URB (qset) from the async list.
+ * @whc: the WHCI host controller
+ * @urb: the URB to dequeue
+ * @status: the current status of the URB
+ *
+ * URBs that do yet have qTDs can simply be removed from the software
+ * queue, otherwise the qset must be removed from the ASL so the qTDs
+ * can be removed.
+ */
+int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status)
+{
+	struct whc_urb *wurb = urb->hcpriv;
+	struct whc_qset *qset = wurb->qset;
+	struct whc_std *std, *t;
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&whc->lock, flags);
+
+	ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status);
+	if (ret < 0)
+		goto out;
+
+	list_for_each_entry_safe(std, t, &qset->stds, list_node) {
+		if (std->urb == urb)
+			qset_free_std(whc, std);
+		else
+			std->qtd = NULL; /* so this std is re-added when the qset is */
+	}
+
+	asl_qset_remove(whc, qset);
+	wurb->status = status;
+	wurb->is_async = true;
+	queue_work(whc->workqueue, &wurb->dequeue_work);
+
+out:
+	spin_unlock_irqrestore(&whc->lock, flags);
+
+	return ret;
+}
+
+/**
+ * asl_qset_delete - delete a qset from the ASL
+ */
+void asl_qset_delete(struct whc *whc, struct whc_qset *qset)
+{
+	qset->remove = 1;
+	queue_work(whc->workqueue, &whc->async_work);
+	qset_delete(whc, qset);
+}
+
+/**
+ * asl_init - initialize the asynchronous schedule list
+ *
+ * A dummy qset with no qTDs is added to the ASL to simplify removing
+ * qsets (no need to stop the ASL when the last qset is removed).
+ */
+int asl_init(struct whc *whc)
+{
+	struct whc_qset *qset;
+
+	qset = qset_alloc(whc, GFP_KERNEL);
+	if (qset == NULL)
+		return -ENOMEM;
+
+	asl_qset_insert_begin(whc, qset);
+	asl_qset_insert(whc, qset);
+
+	return 0;
+}
+
+/**
+ * asl_clean_up - free ASL resources
+ *
+ * The ASL is stopped and empty except for the dummy qset.
+ */
+void asl_clean_up(struct whc *whc)
+{
+	struct whc_qset *qset;
+
+	if (!list_empty(&whc->async_list)) {
+		qset = list_first_entry(&whc->async_list, struct whc_qset, list_node);
+		list_del(&qset->list_node);
+		qset_free(whc, qset);
+	}
+}
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
new file mode 100644
index 0000000..ef3ad4d
--- /dev/null
+++ b/drivers/usb/host/whci/hcd.c
@@ -0,0 +1,339 @@
+/*
+ * Wireless Host Controller (WHC) driver.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/uwb/umc.h>
+
+#include "../../wusbcore/wusbhc.h"
+
+#include "whcd.h"
+
+/*
+ * One time initialization.
+ *
+ * Nothing to do here.
+ */
+static int whc_reset(struct usb_hcd *usb_hcd)
+{
+	return 0;
+}
+
+/*
+ * Start the wireless host controller.
+ *
+ * Start device notification.
+ *
+ * Put hc into run state, set DNTS parameters.
+ */
+static int whc_start(struct usb_hcd *usb_hcd)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	u8 bcid;
+	int ret;
+
+	mutex_lock(&wusbhc->mutex);
+
+	le_writel(WUSBINTR_GEN_CMD_DONE
+		  | WUSBINTR_HOST_ERR
+		  | WUSBINTR_ASYNC_SCHED_SYNCED
+		  | WUSBINTR_DNTS_INT
+		  | WUSBINTR_ERR_INT
+		  | WUSBINTR_INT,
+		  whc->base + WUSBINTR);
+
+	/* set cluster ID */
+	bcid = wusb_cluster_id_get();
+	ret = whc_set_cluster_id(whc, bcid);
+	if (ret < 0)
+		goto out;
+	wusbhc->cluster_id = bcid;
+
+	/* start HC */
+	whc_write_wusbcmd(whc, WUSBCMD_RUN, WUSBCMD_RUN);
+
+	usb_hcd->uses_new_polling = 1;
+	usb_hcd->poll_rh = 1;
+	usb_hcd->state = HC_STATE_RUNNING;
+
+out:
+	mutex_unlock(&wusbhc->mutex);
+	return ret;
+}
+
+
+/*
+ * Stop the wireless host controller.
+ *
+ * Stop device notification.
+ *
+ * Wait for pending transfer to stop? Put hc into stop state?
+ */
+static void whc_stop(struct usb_hcd *usb_hcd)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+
+	mutex_lock(&wusbhc->mutex);
+
+	wusbhc_stop(wusbhc);
+
+	/* stop HC */
+	le_writel(0, whc->base + WUSBINTR);
+	whc_write_wusbcmd(whc, WUSBCMD_RUN, 0);
+	whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
+		      WUSBSTS_HCHALTED, WUSBSTS_HCHALTED,
+		      100, "HC to halt");
+
+	wusb_cluster_id_put(wusbhc->cluster_id);
+
+	mutex_unlock(&wusbhc->mutex);
+}
+
+static int whc_get_frame_number(struct usb_hcd *usb_hcd)
+{
+	/* Frame numbers are not applicable to WUSB. */
+	return -ENOSYS;
+}
+
+
+/*
+ * Queue an URB to the ASL or PZL
+ */
+static int whc_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb,
+			   gfp_t mem_flags)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	int ret;
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_INTERRUPT:
+		ret = pzl_urb_enqueue(whc, urb, mem_flags);
+		break;
+	case PIPE_ISOCHRONOUS:
+		dev_err(&whc->umc->dev, "isochronous transfers unsupported\n");
+		ret = -ENOTSUPP;
+		break;
+	case PIPE_CONTROL:
+	case PIPE_BULK:
+	default:
+		ret = asl_urb_enqueue(whc, urb, mem_flags);
+		break;
+	};
+
+	return ret;
+}
+
+/*
+ * Remove a queued URB from the ASL or PZL.
+ */
+static int whc_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, int status)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	int ret;
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_INTERRUPT:
+		ret = pzl_urb_dequeue(whc, urb, status);
+		break;
+	case PIPE_ISOCHRONOUS:
+		ret = -ENOTSUPP;
+		break;
+	case PIPE_CONTROL:
+	case PIPE_BULK:
+	default:
+		ret = asl_urb_dequeue(whc, urb, status);
+		break;
+	};
+
+	return ret;
+}
+
+/*
+ * Wait for all URBs to the endpoint to be completed, then delete the
+ * qset.
+ */
+static void whc_endpoint_disable(struct usb_hcd *usb_hcd,
+				 struct usb_host_endpoint *ep)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	struct whc_qset *qset;
+
+	qset = ep->hcpriv;
+	if (qset) {
+		ep->hcpriv = NULL;
+		if (usb_endpoint_xfer_bulk(&ep->desc)
+		    || usb_endpoint_xfer_control(&ep->desc))
+			asl_qset_delete(whc, qset);
+		else
+			pzl_qset_delete(whc, qset);
+	}
+}
+
+static struct hc_driver whc_hc_driver = {
+	.description = "whci-hcd",
+	.product_desc = "Wireless host controller",
+	.hcd_priv_size = sizeof(struct whc) - sizeof(struct usb_hcd),
+	.irq = whc_int_handler,
+	.flags = HCD_USB2,
+
+	.reset = whc_reset,
+	.start = whc_start,
+	.stop = whc_stop,
+	.get_frame_number = whc_get_frame_number,
+	.urb_enqueue = whc_urb_enqueue,
+	.urb_dequeue = whc_urb_dequeue,
+	.endpoint_disable = whc_endpoint_disable,
+
+	.hub_status_data = wusbhc_rh_status_data,
+	.hub_control = wusbhc_rh_control,
+	.bus_suspend = wusbhc_rh_suspend,
+	.bus_resume = wusbhc_rh_resume,
+	.start_port_reset = wusbhc_rh_start_port_reset,
+};
+
+static int whc_probe(struct umc_dev *umc)
+{
+	int ret = -ENOMEM;
+	struct usb_hcd *usb_hcd;
+	struct wusbhc *wusbhc = NULL;
+	struct whc *whc = NULL;
+	struct device *dev = &umc->dev;
+
+	usb_hcd = usb_create_hcd(&whc_hc_driver, dev, "whci");
+	if (usb_hcd == NULL) {
+		dev_err(dev, "unable to create hcd\n");
+		goto error;
+	}
+
+	usb_hcd->wireless = 1;
+
+	wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	whc = wusbhc_to_whc(wusbhc);
+	whc->umc = umc;
+
+	ret = whc_init(whc);
+	if (ret)
+		goto error;
+
+	wusbhc->dev = dev;
+	wusbhc->uwb_rc = uwb_rc_get_by_grandpa(umc->dev.parent);
+	if (!wusbhc->uwb_rc) {
+		ret = -ENODEV;
+		dev_err(dev, "cannot get radio controller\n");
+		goto error;
+	}
+
+	if (whc->n_devices > USB_MAXCHILDREN) {
+		dev_warn(dev, "USB_MAXCHILDREN too low for WUSB adapter (%u ports)\n",
+			 whc->n_devices);
+		wusbhc->ports_max = USB_MAXCHILDREN;
+	} else
+		wusbhc->ports_max = whc->n_devices;
+	wusbhc->mmcies_max      = whc->n_mmc_ies;
+	wusbhc->start           = whc_wusbhc_start;
+	wusbhc->stop            = whc_wusbhc_stop;
+	wusbhc->mmcie_add       = whc_mmcie_add;
+	wusbhc->mmcie_rm        = whc_mmcie_rm;
+	wusbhc->dev_info_set    = whc_dev_info_set;
+	wusbhc->bwa_set         = whc_bwa_set;
+	wusbhc->set_num_dnts    = whc_set_num_dnts;
+	wusbhc->set_ptk         = whc_set_ptk;
+	wusbhc->set_gtk         = whc_set_gtk;
+
+	ret = wusbhc_create(wusbhc);
+	if (ret)
+		goto error_wusbhc_create;
+
+	ret = usb_add_hcd(usb_hcd, whc->umc->irq, IRQF_SHARED);
+	if (ret) {
+		dev_err(dev, "cannot add HCD: %d\n", ret);
+		goto error_usb_add_hcd;
+	}
+
+	ret = wusbhc_b_create(wusbhc);
+	if (ret) {
+		dev_err(dev, "WUSBHC phase B setup failed: %d\n", ret);
+		goto error_wusbhc_b_create;
+	}
+
+	return 0;
+
+error_wusbhc_b_create:
+	usb_remove_hcd(usb_hcd);
+error_usb_add_hcd:
+	wusbhc_destroy(wusbhc);
+error_wusbhc_create:
+	uwb_rc_put(wusbhc->uwb_rc);
+error:
+	whc_clean_up(whc);
+	if (usb_hcd)
+		usb_put_hcd(usb_hcd);
+	return ret;
+}
+
+
+static void whc_remove(struct umc_dev *umc)
+{
+	struct usb_hcd *usb_hcd = dev_get_drvdata(&umc->dev);
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+
+	if (usb_hcd) {
+		wusbhc_b_destroy(wusbhc);
+		usb_remove_hcd(usb_hcd);
+		wusbhc_destroy(wusbhc);
+		uwb_rc_put(wusbhc->uwb_rc);
+		whc_clean_up(whc);
+		usb_put_hcd(usb_hcd);
+	}
+}
+
+static struct umc_driver whci_hc_driver = {
+	.name =		"whci-hcd",
+	.cap_id =       UMC_CAP_ID_WHCI_WUSB_HC,
+	.probe =	whc_probe,
+	.remove =	whc_remove,
+};
+
+static int __init whci_hc_driver_init(void)
+{
+	return umc_driver_register(&whci_hc_driver);
+}
+module_init(whci_hc_driver_init);
+
+static void __exit whci_hc_driver_exit(void)
+{
+	umc_driver_unregister(&whci_hc_driver);
+}
+module_exit(whci_hc_driver_exit);
+
+/* PCI device ID's that we handle (so it gets loaded) */
+static struct pci_device_id whci_hcd_id_table[] = {
+	{ PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
+	{ /* empty last entry */ }
+};
+MODULE_DEVICE_TABLE(pci, whci_hcd_id_table);
+
+MODULE_DESCRIPTION("WHCI Wireless USB host controller driver");
+MODULE_AUTHOR("Cambridge Silicon Radio Ltd.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/whci/hw.c b/drivers/usb/host/whci/hw.c
new file mode 100644
index 0000000..ac86e59
--- /dev/null
+++ b/drivers/usb/host/whci/hw.c
@@ -0,0 +1,87 @@
+/*
+ * Wireless Host Controller (WHC) hardware access helpers.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/uwb/umc.h>
+
+#include "../../wusbcore/wusbhc.h"
+
+#include "whcd.h"
+
+void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val)
+{
+	unsigned long flags;
+	u32 cmd;
+
+	spin_lock_irqsave(&whc->lock, flags);
+
+	cmd = le_readl(whc->base + WUSBCMD);
+	cmd = (cmd & ~mask) | val;
+	le_writel(cmd, whc->base + WUSBCMD);
+
+	spin_unlock_irqrestore(&whc->lock, flags);
+}
+
+/**
+ * whc_do_gencmd - start a generic command via the WUSBGENCMDSTS register
+ * @whc:    the WHCI HC
+ * @cmd:    command to start.
+ * @params: parameters for the command (the WUSBGENCMDPARAMS register value).
+ * @addr:   pointer to any data for the command (may be NULL).
+ * @len:    length of the data (if any).
+ */
+int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len)
+{
+	unsigned long flags;
+	dma_addr_t dma_addr;
+	int t;
+
+	mutex_lock(&whc->mutex);
+
+	/* Wait for previous command to complete. */
+	t = wait_event_timeout(whc->cmd_wq,
+			       (le_readl(whc->base + WUSBGENCMDSTS) & WUSBGENCMDSTS_ACTIVE) == 0,
+			       WHC_GENCMD_TIMEOUT_MS);
+	if (t == 0) {
+		dev_err(&whc->umc->dev, "generic command timeout (%04x/%04x)\n",
+			le_readl(whc->base + WUSBGENCMDSTS),
+			le_readl(whc->base + WUSBGENCMDPARAMS));
+		return -ETIMEDOUT;
+	}
+
+	if (addr) {
+		memcpy(whc->gen_cmd_buf, addr, len);
+		dma_addr = whc->gen_cmd_buf_dma;
+	} else
+		dma_addr = 0;
+
+	/* Poke registers to start cmd. */
+	spin_lock_irqsave(&whc->lock, flags);
+
+	le_writel(params, whc->base + WUSBGENCMDPARAMS);
+	le_writeq(dma_addr, whc->base + WUSBGENADDR);
+
+	le_writel(WUSBGENCMDSTS_ACTIVE | WUSBGENCMDSTS_IOC | cmd,
+		  whc->base + WUSBGENCMDSTS);
+
+	spin_unlock_irqrestore(&whc->lock, flags);
+
+	mutex_unlock(&whc->mutex);
+
+	return 0;
+}
diff --git a/drivers/usb/host/whci/init.c b/drivers/usb/host/whci/init.c
new file mode 100644
index 0000000..34a783c
--- /dev/null
+++ b/drivers/usb/host/whci/init.c
@@ -0,0 +1,188 @@
+/*
+ * Wireless Host Controller (WHC) initialization.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/uwb/umc.h>
+
+#include "../../wusbcore/wusbhc.h"
+
+#include "whcd.h"
+
+/*
+ * Reset the host controller.
+ */
+static void whc_hw_reset(struct whc *whc)
+{
+	le_writel(WUSBCMD_WHCRESET, whc->base + WUSBCMD);
+	whci_wait_for(&whc->umc->dev, whc->base + WUSBCMD, WUSBCMD_WHCRESET, 0,
+		      100, "reset");
+}
+
+static void whc_hw_init_di_buf(struct whc *whc)
+{
+	int d;
+
+	/* Disable all entries in the Device Information buffer. */
+	for (d = 0; d < whc->n_devices; d++)
+		whc->di_buf[d].addr_sec_info = WHC_DI_DISABLE;
+
+	le_writeq(whc->di_buf_dma, whc->base + WUSBDEVICEINFOADDR);
+}
+
+static void whc_hw_init_dn_buf(struct whc *whc)
+{
+	/* Clear the Device Notification buffer to ensure the V (valid)
+	 * bits are clear.  */
+	memset(whc->dn_buf, 0, 4096);
+
+	le_writeq(whc->dn_buf_dma, whc->base + WUSBDNTSBUFADDR);
+}
+
+int whc_init(struct whc *whc)
+{
+	u32 whcsparams;
+	int ret, i;
+	resource_size_t start, len;
+
+	spin_lock_init(&whc->lock);
+	mutex_init(&whc->mutex);
+	init_waitqueue_head(&whc->cmd_wq);
+	init_waitqueue_head(&whc->async_list_wq);
+	init_waitqueue_head(&whc->periodic_list_wq);
+	whc->workqueue = create_singlethread_workqueue(dev_name(&whc->umc->dev));
+	if (whc->workqueue == NULL) {
+		ret = -ENOMEM;
+		goto error;
+	}
+	INIT_WORK(&whc->dn_work, whc_dn_work);
+
+	INIT_WORK(&whc->async_work, scan_async_work);
+	INIT_LIST_HEAD(&whc->async_list);
+	INIT_LIST_HEAD(&whc->async_removed_list);
+
+	INIT_WORK(&whc->periodic_work, scan_periodic_work);
+	for (i = 0; i < 5; i++)
+		INIT_LIST_HEAD(&whc->periodic_list[i]);
+	INIT_LIST_HEAD(&whc->periodic_removed_list);
+
+	/* Map HC registers. */
+	start = whc->umc->resource.start;
+	len   = whc->umc->resource.end - start + 1;
+	if (!request_mem_region(start, len, "whci-hc")) {
+		dev_err(&whc->umc->dev, "can't request HC region\n");
+		ret = -EBUSY;
+		goto error;
+	}
+	whc->base_phys = start;
+	whc->base = ioremap(start, len);
+	if (!whc->base) {
+		dev_err(&whc->umc->dev, "ioremap\n");
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	whc_hw_reset(whc);
+
+	/* Read maximum number of devices, keys and MMC IEs. */
+	whcsparams = le_readl(whc->base + WHCSPARAMS);
+	whc->n_devices = WHCSPARAMS_TO_N_DEVICES(whcsparams);
+	whc->n_keys    = WHCSPARAMS_TO_N_KEYS(whcsparams);
+	whc->n_mmc_ies = WHCSPARAMS_TO_N_MMC_IES(whcsparams);
+
+	dev_dbg(&whc->umc->dev, "N_DEVICES = %d, N_KEYS = %d, N_MMC_IES = %d\n",
+		whc->n_devices, whc->n_keys, whc->n_mmc_ies);
+
+	whc->qset_pool = dma_pool_create("qset", &whc->umc->dev,
+					 sizeof(struct whc_qset), 64, 0);
+	if (whc->qset_pool == NULL) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	ret = asl_init(whc);
+	if (ret < 0)
+		goto error;
+	ret = pzl_init(whc);
+	if (ret < 0)
+		goto error;
+
+	/* Allocate and initialize a buffer for generic commands, the
+	   Device Information buffer, and the Device Notification
+	   buffer. */
+
+	whc->gen_cmd_buf = dma_alloc_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN,
+					      &whc->gen_cmd_buf_dma, GFP_KERNEL);
+	if (whc->gen_cmd_buf == NULL) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	whc->dn_buf = dma_alloc_coherent(&whc->umc->dev,
+					 sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES,
+					 &whc->dn_buf_dma, GFP_KERNEL);
+	if (!whc->dn_buf) {
+		ret = -ENOMEM;
+		goto error;
+	}
+	whc_hw_init_dn_buf(whc);
+
+	whc->di_buf = dma_alloc_coherent(&whc->umc->dev,
+					 sizeof(struct di_buf_entry) * whc->n_devices,
+					 &whc->di_buf_dma, GFP_KERNEL);
+	if (!whc->di_buf) {
+		ret = -ENOMEM;
+		goto error;
+	}
+	whc_hw_init_di_buf(whc);
+
+	return 0;
+
+error:
+	whc_clean_up(whc);
+	return ret;
+}
+
+void whc_clean_up(struct whc *whc)
+{
+	resource_size_t len;
+
+	if (whc->di_buf)
+		dma_free_coherent(&whc->umc->dev, sizeof(struct di_buf_entry) * whc->n_devices,
+				  whc->di_buf, whc->di_buf_dma);
+	if (whc->dn_buf)
+		dma_free_coherent(&whc->umc->dev, sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES,
+				  whc->dn_buf, whc->dn_buf_dma);
+	if (whc->gen_cmd_buf)
+		dma_free_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN,
+				  whc->gen_cmd_buf, whc->gen_cmd_buf_dma);
+
+	pzl_clean_up(whc);
+	asl_clean_up(whc);
+
+	if (whc->qset_pool)
+		dma_pool_destroy(whc->qset_pool);
+
+	len   = whc->umc->resource.end - whc->umc->resource.start + 1;
+	if (whc->base)
+		iounmap(whc->base);
+	if (whc->base_phys)
+		release_mem_region(whc->base_phys, len);
+
+	if (whc->workqueue)
+		destroy_workqueue(whc->workqueue);
+}
diff --git a/drivers/usb/host/whci/int.c b/drivers/usb/host/whci/int.c
new file mode 100644
index 0000000..fce0117
--- /dev/null
+++ b/drivers/usb/host/whci/int.c
@@ -0,0 +1,95 @@
+/*
+ * Wireless Host Controller (WHC) interrupt handling.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/uwb/umc.h>
+
+#include "../../wusbcore/wusbhc.h"
+
+#include "whcd.h"
+
+static void transfer_done(struct whc *whc)
+{
+	queue_work(whc->workqueue, &whc->async_work);
+	queue_work(whc->workqueue, &whc->periodic_work);
+}
+
+irqreturn_t whc_int_handler(struct usb_hcd *hcd)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	u32 sts;
+
+	sts = le_readl(whc->base + WUSBSTS);
+	if (!(sts & WUSBSTS_INT_MASK))
+		return IRQ_NONE;
+	le_writel(sts & WUSBSTS_INT_MASK, whc->base + WUSBSTS);
+
+	if (sts & WUSBSTS_GEN_CMD_DONE)
+		wake_up(&whc->cmd_wq);
+
+	if (sts & WUSBSTS_HOST_ERR)
+		dev_err(&whc->umc->dev, "FIXME: host system error\n");
+
+	if (sts & WUSBSTS_ASYNC_SCHED_SYNCED)
+		wake_up(&whc->async_list_wq);
+
+	if (sts & WUSBSTS_PERIODIC_SCHED_SYNCED)
+		wake_up(&whc->periodic_list_wq);
+
+	if (sts & WUSBSTS_DNTS_INT)
+		queue_work(whc->workqueue, &whc->dn_work);
+
+	/*
+	 * A transfer completed (see [WHCI] section 4.7.1.2 for when
+	 * this occurs).
+	 */
+	if (sts & (WUSBSTS_INT | WUSBSTS_ERR_INT))
+		transfer_done(whc);
+
+	return IRQ_HANDLED;
+}
+
+static int process_dn_buf(struct whc *whc)
+{
+	struct wusbhc *wusbhc = &whc->wusbhc;
+	struct dn_buf_entry *dn;
+	int processed = 0;
+
+	for (dn = whc->dn_buf; dn < whc->dn_buf + WHC_N_DN_ENTRIES; dn++) {
+		if (dn->status & WHC_DN_STATUS_VALID) {
+			wusbhc_handle_dn(wusbhc, dn->src_addr,
+					 (struct wusb_dn_hdr *)dn->dn_data,
+					 dn->msg_size);
+			dn->status &= ~WHC_DN_STATUS_VALID;
+			processed++;
+		}
+	}
+	return processed;
+}
+
+void whc_dn_work(struct work_struct *work)
+{
+	struct whc *whc = container_of(work, struct whc, dn_work);
+	int processed;
+
+	do {
+		processed = process_dn_buf(whc);
+	} while (processed);
+}
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c
new file mode 100644
index 0000000..8d62df0
--- /dev/null
+++ b/drivers/usb/host/whci/pzl.c
@@ -0,0 +1,398 @@
+/*
+ * Wireless Host Controller (WHC) periodic schedule management.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/uwb/umc.h>
+#include <linux/usb.h>
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+#include "../../wusbcore/wusbhc.h"
+
+#include "whcd.h"
+
+#if D_LOCAL >= 4
+static void dump_pzl(struct whc *whc, const char *tag)
+{
+	struct device *dev = &whc->umc->dev;
+	struct whc_qset *qset;
+	int period = 0;
+
+	d_printf(4, dev, "PZL %s\n", tag);
+
+	for (period = 0; period < 5; period++) {
+		d_printf(4, dev, "Period %d\n", period);
+		list_for_each_entry(qset, &whc->periodic_list[period], list_node) {
+			dump_qset(qset, dev);
+		}
+	}
+}
+#else
+static inline void dump_pzl(struct whc *whc, const char *tag)
+{
+}
+#endif
+
+static void update_pzl_pointers(struct whc *whc, int period, u64 addr)
+{
+	switch (period) {
+	case 0:
+		whc_qset_set_link_ptr(&whc->pz_list[0], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[2], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[4], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[6], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[8], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[10], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[12], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[14], addr);
+		break;
+	case 1:
+		whc_qset_set_link_ptr(&whc->pz_list[1], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[5], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[9], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[13], addr);
+		break;
+	case 2:
+		whc_qset_set_link_ptr(&whc->pz_list[3], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[11], addr);
+		break;
+	case 3:
+		whc_qset_set_link_ptr(&whc->pz_list[7], addr);
+		break;
+	case 4:
+		whc_qset_set_link_ptr(&whc->pz_list[15], addr);
+		break;
+	}
+}
+
+/*
+ * Return the 'period' to use for this qset.  The minimum interval for
+ * the endpoint is used so whatever urbs are submitted the device is
+ * polled often enough.
+ */
+static int qset_get_period(struct whc *whc, struct whc_qset *qset)
+{
+	uint8_t bInterval = qset->ep->desc.bInterval;
+
+	if (bInterval < 6)
+		bInterval = 6;
+	if (bInterval > 10)
+		bInterval = 10;
+	return bInterval - 6;
+}
+
+static void qset_insert_in_sw_list(struct whc *whc, struct whc_qset *qset)
+{
+	int period;
+
+	period = qset_get_period(whc, qset);
+
+	qset_clear(whc, qset);
+	list_move(&qset->list_node, &whc->periodic_list[period]);
+	qset->in_sw_list = true;
+}
+
+static void pzl_qset_remove(struct whc *whc, struct whc_qset *qset)
+{
+	list_move(&qset->list_node, &whc->periodic_removed_list);
+	qset->in_hw_list = false;
+	qset->in_sw_list = false;
+}
+
+/**
+ * pzl_process_qset - process any recently inactivated or halted qTDs
+ * in a qset.
+ *
+ * After inactive qTDs are removed, new qTDs can be added if the
+ * urb queue still contains URBs.
+ *
+ * Returns the schedule updates required.
+ */
+static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset)
+{
+	enum whc_update update = 0;
+	uint32_t status = 0;
+
+	while (qset->ntds) {
+		struct whc_qtd *td;
+		int t;
+
+		t = qset->td_start;
+		td = &qset->qtd[qset->td_start];
+		status = le32_to_cpu(td->status);
+
+		/*
+		 * Nothing to do with a still active qTD.
+		 */
+		if (status & QTD_STS_ACTIVE)
+			break;
+
+		if (status & QTD_STS_HALTED) {
+			/* Ug, an error. */
+			process_halted_qtd(whc, qset, td);
+			goto done;
+		}
+
+		/* Mmm, a completed qTD. */
+		process_inactive_qtd(whc, qset, td);
+	}
+
+	update |= qset_add_qtds(whc, qset);
+
+done:
+	/*
+	 * If there are no qTDs in this qset, remove it from the PZL.
+	 */
+	if (qset->remove && qset->ntds == 0) {
+		pzl_qset_remove(whc, qset);
+		update |= WHC_UPDATE_REMOVED;
+	}
+
+	return update;
+}
+
+/**
+ * pzl_start - start the periodic schedule
+ * @whc: the WHCI host controller
+ *
+ * The PZL must be valid (e.g., all entries in the list should have
+ * the T bit set).
+ */
+void pzl_start(struct whc *whc)
+{
+	le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE);
+
+	whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, WUSBCMD_PERIODIC_EN);
+	whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
+		      WUSBSTS_PERIODIC_SCHED, WUSBSTS_PERIODIC_SCHED,
+		      1000, "start PZL");
+}
+
+/**
+ * pzl_stop - stop the periodic schedule
+ * @whc: the WHCI host controller
+ */
+void pzl_stop(struct whc *whc)
+{
+	whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, 0);
+	whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
+		      WUSBSTS_PERIODIC_SCHED, 0,
+		      1000, "stop PZL");
+}
+
+void pzl_update(struct whc *whc, uint32_t wusbcmd)
+{
+	whc_write_wusbcmd(whc, wusbcmd, wusbcmd);
+	wait_event(whc->periodic_list_wq,
+		   (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0);
+}
+
+static void update_pzl_hw_view(struct whc *whc)
+{
+	struct whc_qset *qset, *t;
+	int period;
+	u64 tmp_qh = 0;
+
+	for (period = 0; period < 5; period++) {
+		list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) {
+			whc_qset_set_link_ptr(&qset->qh.link, tmp_qh);
+			tmp_qh = qset->qset_dma;
+			qset->in_hw_list = true;
+		}
+		update_pzl_pointers(whc, period, tmp_qh);
+	}
+}
+
+/**
+ * scan_periodic_work - scan the PZL for qsets to process.
+ *
+ * Process each qset in the PZL in turn and then signal the WHC that
+ * the PZL has been updated.
+ *
+ * Then start, stop or update the periodic schedule as required.
+ */
+void scan_periodic_work(struct work_struct *work)
+{
+	struct whc *whc = container_of(work, struct whc, periodic_work);
+	struct whc_qset *qset, *t;
+	enum whc_update update = 0;
+	int period;
+
+	spin_lock_irq(&whc->lock);
+
+	dump_pzl(whc, "before processing");
+
+	for (period = 4; period >= 0; period--) {
+		list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) {
+			if (!qset->in_hw_list)
+				update |= WHC_UPDATE_ADDED;
+			update |= pzl_process_qset(whc, qset);
+		}
+	}
+
+	if (update & (WHC_UPDATE_ADDED | WHC_UPDATE_REMOVED))
+		update_pzl_hw_view(whc);
+
+	dump_pzl(whc, "after processing");
+
+	spin_unlock_irq(&whc->lock);
+
+	if (update) {
+		uint32_t wusbcmd = WUSBCMD_PERIODIC_UPDATED | WUSBCMD_PERIODIC_SYNCED_DB;
+		if (update & WHC_UPDATE_REMOVED)
+			wusbcmd |= WUSBCMD_PERIODIC_QSET_RM;
+		pzl_update(whc, wusbcmd);
+	}
+
+	/*
+	 * Now that the PZL is updated, complete the removal of any
+	 * removed qsets.
+	 */
+	spin_lock(&whc->lock);
+
+	list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) {
+		qset_remove_complete(whc, qset);
+	}
+
+	spin_unlock(&whc->lock);
+}
+
+/**
+ * pzl_urb_enqueue - queue an URB onto the periodic list (PZL)
+ * @whc: the WHCI host controller
+ * @urb: the URB to enqueue
+ * @mem_flags: flags for any memory allocations
+ *
+ * The qset for the endpoint is obtained and the urb queued on to it.
+ *
+ * Work is scheduled to update the hardware's view of the PZL.
+ */
+int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags)
+{
+	struct whc_qset *qset;
+	int err;
+	unsigned long flags;
+
+	spin_lock_irqsave(&whc->lock, flags);
+
+	qset = get_qset(whc, urb, GFP_ATOMIC);
+	if (qset == NULL)
+		err = -ENOMEM;
+	else
+		err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
+	if (!err) {
+		usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+		if (!qset->in_sw_list)
+			qset_insert_in_sw_list(whc, qset);
+	}
+
+	spin_unlock_irqrestore(&whc->lock, flags);
+
+	if (!err)
+		queue_work(whc->workqueue, &whc->periodic_work);
+
+	return 0;
+}
+
+/**
+ * pzl_urb_dequeue - remove an URB (qset) from the periodic list
+ * @whc: the WHCI host controller
+ * @urb: the URB to dequeue
+ * @status: the current status of the URB
+ *
+ * URBs that do yet have qTDs can simply be removed from the software
+ * queue, otherwise the qset must be removed so the qTDs can be safely
+ * removed.
+ */
+int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status)
+{
+	struct whc_urb *wurb = urb->hcpriv;
+	struct whc_qset *qset = wurb->qset;
+	struct whc_std *std, *t;
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&whc->lock, flags);
+
+	ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status);
+	if (ret < 0)
+		goto out;
+
+	list_for_each_entry_safe(std, t, &qset->stds, list_node) {
+		if (std->urb == urb)
+			qset_free_std(whc, std);
+		else
+			std->qtd = NULL; /* so this std is re-added when the qset is */
+	}
+
+	pzl_qset_remove(whc, qset);
+	wurb->status = status;
+	wurb->is_async = false;
+	queue_work(whc->workqueue, &wurb->dequeue_work);
+
+out:
+	spin_unlock_irqrestore(&whc->lock, flags);
+
+	return ret;
+}
+
+/**
+ * pzl_qset_delete - delete a qset from the PZL
+ */
+void pzl_qset_delete(struct whc *whc, struct whc_qset *qset)
+{
+	qset->remove = 1;
+	queue_work(whc->workqueue, &whc->periodic_work);
+	qset_delete(whc, qset);
+}
+
+
+/**
+ * pzl_init - initialize the periodic zone list
+ * @whc: the WHCI host controller
+ */
+int pzl_init(struct whc *whc)
+{
+	int i;
+
+	whc->pz_list = dma_alloc_coherent(&whc->umc->dev, sizeof(u64) * 16,
+					  &whc->pz_list_dma, GFP_KERNEL);
+	if (whc->pz_list == NULL)
+		return -ENOMEM;
+
+	/* Set T bit on all elements in PZL. */
+	for (i = 0; i < 16; i++)
+		whc->pz_list[i] = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T);
+
+	le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE);
+
+	return 0;
+}
+
+/**
+ * pzl_clean_up - free PZL resources
+ * @whc: the WHCI host controller
+ *
+ * The PZL is stopped and empty.
+ */
+void pzl_clean_up(struct whc *whc)
+{
+	if (whc->pz_list)
+		dma_free_coherent(&whc->umc->dev,  sizeof(u64) * 16, whc->pz_list,
+				  whc->pz_list_dma);
+}
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
new file mode 100644
index 0000000..0420037
--- /dev/null
+++ b/drivers/usb/host/whci/qset.c
@@ -0,0 +1,567 @@
+/*
+ * Wireless Host Controller (WHC) qset management.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/uwb/umc.h>
+#include <linux/usb.h>
+
+#include "../../wusbcore/wusbhc.h"
+
+#include "whcd.h"
+
+void dump_qset(struct whc_qset *qset, struct device *dev)
+{
+	struct whc_std *std;
+	struct urb *urb = NULL;
+	int i;
+
+	dev_dbg(dev, "qset %08x\n", (u32)qset->qset_dma);
+	dev_dbg(dev, "  -> %08x\n", (u32)qset->qh.link);
+	dev_dbg(dev, "  info: %08x %08x %08x\n",
+		qset->qh.info1, qset->qh.info2,  qset->qh.info3);
+	dev_dbg(dev, "  sts: %04x errs: %d\n", qset->qh.status, qset->qh.err_count);
+	dev_dbg(dev, "  TD: sts: %08x opts: %08x\n",
+		qset->qh.overlay.qtd.status, qset->qh.overlay.qtd.options);
+
+	for (i = 0; i < WHCI_QSET_TD_MAX; i++) {
+		dev_dbg(dev, "  %c%c TD[%d]: sts: %08x opts: %08x ptr: %08x\n",
+			i == qset->td_start ? 'S' : ' ',
+			i == qset->td_end ? 'E' : ' ',
+			i, qset->qtd[i].status, qset->qtd[i].options,
+			(u32)qset->qtd[i].page_list_ptr);
+	}
+	dev_dbg(dev, "  ntds: %d\n", qset->ntds);
+	list_for_each_entry(std, &qset->stds, list_node) {
+		if (urb != std->urb) {
+			urb = std->urb;
+			dev_dbg(dev, "  urb %p transferred: %d bytes\n", urb,
+				urb->actual_length);
+		}
+		if (std->qtd)
+			dev_dbg(dev, "    sTD[%td]: %zu bytes @ %08x\n",
+				std->qtd - &qset->qtd[0],
+				std->len, std->num_pointers ?
+				(u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr);
+		else
+			dev_dbg(dev, "    sTD[-]: %zd bytes @ %08x\n",
+				std->len, std->num_pointers ?
+				(u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr);
+	}
+}
+
+struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags)
+{
+	struct whc_qset *qset;
+	dma_addr_t dma;
+
+	qset = dma_pool_alloc(whc->qset_pool, mem_flags, &dma);
+	if (qset == NULL)
+		return NULL;
+	memset(qset, 0, sizeof(struct whc_qset));
+
+	qset->qset_dma = dma;
+	qset->whc = whc;
+
+	INIT_LIST_HEAD(&qset->list_node);
+	INIT_LIST_HEAD(&qset->stds);
+
+	return qset;
+}
+
+/**
+ * qset_fill_qh - fill the static endpoint state in a qset's QHead
+ * @qset: the qset whose QH needs initializing with static endpoint
+ *        state
+ * @urb:  an urb for a transfer to this endpoint
+ */
+static void qset_fill_qh(struct whc_qset *qset, struct urb *urb)
+{
+	struct usb_device *usb_dev = urb->dev;
+	struct usb_wireless_ep_comp_descriptor *epcd;
+	bool is_out;
+
+	is_out = usb_pipeout(urb->pipe);
+
+	epcd = (struct usb_wireless_ep_comp_descriptor *)qset->ep->extra;
+
+	if (epcd) {
+		qset->max_seq = epcd->bMaxSequence;
+		qset->max_burst = epcd->bMaxBurst;
+	} else {
+		qset->max_seq = 2;
+		qset->max_burst = 1;
+	}
+
+	qset->qh.info1 = cpu_to_le32(
+		QH_INFO1_EP(usb_pipeendpoint(urb->pipe))
+		| (is_out ? QH_INFO1_DIR_OUT : QH_INFO1_DIR_IN)
+		| usb_pipe_to_qh_type(urb->pipe)
+		| QH_INFO1_DEV_INFO_IDX(wusb_port_no_to_idx(usb_dev->portnum))
+		| QH_INFO1_MAX_PKT_LEN(usb_maxpacket(urb->dev, urb->pipe, is_out))
+		);
+	qset->qh.info2 = cpu_to_le32(
+		QH_INFO2_BURST(qset->max_burst)
+		| QH_INFO2_DBP(0)
+		| QH_INFO2_MAX_COUNT(3)
+		| QH_INFO2_MAX_RETRY(3)
+		| QH_INFO2_MAX_SEQ(qset->max_seq - 1)
+		);
+	/* FIXME: where can we obtain these Tx parameters from?  Why
+	 * doesn't the chip know what Tx power to use? It knows the Rx
+	 * strength and can presumably guess the Tx power required
+	 * from that? */
+	qset->qh.info3 = cpu_to_le32(
+		QH_INFO3_TX_RATE_53_3
+		| QH_INFO3_TX_PWR(0) /* 0 == max power */
+		);
+}
+
+/**
+ * qset_clear - clear fields in a qset so it may be reinserted into a
+ * schedule
+ */
+void qset_clear(struct whc *whc, struct whc_qset *qset)
+{
+	qset->td_start = qset->td_end = qset->ntds = 0;
+	qset->remove = 0;
+
+	qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T);
+	qset->qh.status = cpu_to_le16(QH_STATUS_ICUR(qset->td_start));
+	qset->qh.err_count = 0;
+	qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
+	qset->qh.scratch[0] = 0;
+	qset->qh.scratch[1] = 0;
+	qset->qh.scratch[2] = 0;
+
+	memset(&qset->qh.overlay, 0, sizeof(qset->qh.overlay));
+
+	init_completion(&qset->remove_complete);
+}
+
+/**
+ * get_qset - get the qset for an async endpoint
+ *
+ * A new qset is created if one does not already exist.
+ */
+struct whc_qset *get_qset(struct whc *whc, struct urb *urb,
+				 gfp_t mem_flags)
+{
+	struct whc_qset *qset;
+
+	qset = urb->ep->hcpriv;
+	if (qset == NULL) {
+		qset = qset_alloc(whc, mem_flags);
+		if (qset == NULL)
+			return NULL;
+
+		qset->ep = urb->ep;
+		urb->ep->hcpriv = qset;
+		qset_fill_qh(qset, urb);
+	}
+	return qset;
+}
+
+void qset_remove_complete(struct whc *whc, struct whc_qset *qset)
+{
+	list_del_init(&qset->list_node);
+	complete(&qset->remove_complete);
+}
+
+/**
+ * qset_add_qtds - add qTDs for an URB to a qset
+ *
+ * Returns true if the list (ASL/PZL) must be updated because (for a
+ * WHCI 0.95 controller) an activated qTD was pointed to be iCur.
+ */
+enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset)
+{
+	struct whc_std *std;
+	enum whc_update update = 0;
+
+	list_for_each_entry(std, &qset->stds, list_node) {
+		struct whc_qtd *qtd;
+		uint32_t status;
+
+		if (qset->ntds >= WHCI_QSET_TD_MAX
+		    || (qset->pause_after_urb && std->urb != qset->pause_after_urb))
+			break;
+
+		if (std->qtd)
+			continue; /* already has a qTD */
+
+		qtd = std->qtd = &qset->qtd[qset->td_end];
+
+		/* Fill in setup bytes for control transfers. */
+		if (usb_pipecontrol(std->urb->pipe))
+			memcpy(qtd->setup, std->urb->setup_packet, 8);
+
+		status = QTD_STS_ACTIVE | QTD_STS_LEN(std->len);
+
+		if (whc_std_last(std) && usb_pipeout(std->urb->pipe))
+			status |= QTD_STS_LAST_PKT;
+
+		/*
+		 * For an IN transfer the iAlt field should be set so
+		 * the h/w will automatically advance to the next
+		 * transfer. However, if there are 8 or more TDs
+		 * remaining in this transfer then iAlt cannot be set
+		 * as it could point to somewhere in this transfer.
+		 */
+		if (std->ntds_remaining < WHCI_QSET_TD_MAX) {
+			int ialt;
+			ialt = (qset->td_end + std->ntds_remaining) % WHCI_QSET_TD_MAX;
+			status |= QTD_STS_IALT(ialt);
+		} else if (usb_pipein(std->urb->pipe))
+			qset->pause_after_urb = std->urb;
+
+		if (std->num_pointers)
+			qtd->options = cpu_to_le32(QTD_OPT_IOC);
+		else
+			qtd->options = cpu_to_le32(QTD_OPT_IOC | QTD_OPT_SMALL);
+		qtd->page_list_ptr = cpu_to_le64(std->dma_addr);
+
+		qtd->status = cpu_to_le32(status);
+
+		if (QH_STATUS_TO_ICUR(qset->qh.status) == qset->td_end)
+			update = WHC_UPDATE_UPDATED;
+
+		if (++qset->td_end >= WHCI_QSET_TD_MAX)
+			qset->td_end = 0;
+		qset->ntds++;
+	}
+
+	return update;
+}
+
+/**
+ * qset_remove_qtd - remove the first qTD from a qset.
+ *
+ * The qTD might be still active (if it's part of a IN URB that
+ * resulted in a short read) so ensure it's deactivated.
+ */
+static void qset_remove_qtd(struct whc *whc, struct whc_qset *qset)
+{
+	qset->qtd[qset->td_start].status = 0;
+
+	if (++qset->td_start >= WHCI_QSET_TD_MAX)
+		qset->td_start = 0;
+	qset->ntds--;
+}
+
+/**
+ * qset_free_std - remove an sTD and free it.
+ * @whc: the WHCI host controller
+ * @std: the sTD to remove and free.
+ */
+void qset_free_std(struct whc *whc, struct whc_std *std)
+{
+	list_del(&std->list_node);
+	if (std->num_pointers) {
+		dma_unmap_single(whc->wusbhc.dev, std->dma_addr,
+				 std->num_pointers * sizeof(struct whc_page_list_entry),
+				 DMA_TO_DEVICE);
+		kfree(std->pl_virt);
+	}
+
+	kfree(std);
+}
+
+/**
+ * qset_remove_qtds - remove an URB's qTDs (and sTDs).
+ */
+static void qset_remove_qtds(struct whc *whc, struct whc_qset *qset,
+			     struct urb *urb)
+{
+	struct whc_std *std, *t;
+
+	list_for_each_entry_safe(std, t, &qset->stds, list_node) {
+		if (std->urb != urb)
+			break;
+		if (std->qtd != NULL)
+			qset_remove_qtd(whc, qset);
+		qset_free_std(whc, std);
+	}
+}
+
+/**
+ * qset_free_stds - free any remaining sTDs for an URB.
+ */
+static void qset_free_stds(struct whc_qset *qset, struct urb *urb)
+{
+	struct whc_std *std, *t;
+
+	list_for_each_entry_safe(std, t, &qset->stds, list_node) {
+		if (std->urb == urb)
+			qset_free_std(qset->whc, std);
+	}
+}
+
+static int qset_fill_page_list(struct whc *whc, struct whc_std *std, gfp_t mem_flags)
+{
+	dma_addr_t dma_addr = std->dma_addr;
+	dma_addr_t sp, ep;
+	size_t std_len = std->len;
+	size_t pl_len;
+	int p;
+
+	sp = ALIGN(dma_addr, WHCI_PAGE_SIZE);
+	ep = dma_addr + std_len;
+	std->num_pointers = DIV_ROUND_UP(ep - sp, WHCI_PAGE_SIZE);
+
+	pl_len = std->num_pointers * sizeof(struct whc_page_list_entry);
+	std->pl_virt = kmalloc(pl_len, mem_flags);
+	if (std->pl_virt == NULL)
+		return -ENOMEM;
+	std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, pl_len, DMA_TO_DEVICE);
+
+	for (p = 0; p < std->num_pointers; p++) {
+		std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr);
+		dma_addr = ALIGN(dma_addr + WHCI_PAGE_SIZE, WHCI_PAGE_SIZE);
+	}
+
+	return 0;
+}
+
+/**
+ * urb_dequeue_work - executes asl/pzl update and gives back the urb to the system.
+ */
+static void urb_dequeue_work(struct work_struct *work)
+{
+	struct whc_urb *wurb = container_of(work, struct whc_urb, dequeue_work);
+	struct whc_qset *qset = wurb->qset;
+	struct whc *whc = qset->whc;
+	unsigned long flags;
+
+	if (wurb->is_async == true)
+		asl_update(whc, WUSBCMD_ASYNC_UPDATED
+			   | WUSBCMD_ASYNC_SYNCED_DB
+			   | WUSBCMD_ASYNC_QSET_RM);
+	else
+		pzl_update(whc, WUSBCMD_PERIODIC_UPDATED
+			   | WUSBCMD_PERIODIC_SYNCED_DB
+			   | WUSBCMD_PERIODIC_QSET_RM);
+
+	spin_lock_irqsave(&whc->lock, flags);
+	qset_remove_urb(whc, qset, wurb->urb, wurb->status);
+	spin_unlock_irqrestore(&whc->lock, flags);
+}
+
+/**
+ * qset_add_urb - add an urb to the qset's queue.
+ *
+ * The URB is chopped into sTDs, one for each qTD that will required.
+ * At least one qTD (and sTD) is required even if the transfer has no
+ * data (e.g., for some control transfers).
+ */
+int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb,
+	gfp_t mem_flags)
+{
+	struct whc_urb *wurb;
+	int remaining = urb->transfer_buffer_length;
+	u64 transfer_dma = urb->transfer_dma;
+	int ntds_remaining;
+
+	ntds_remaining = DIV_ROUND_UP(remaining, QTD_MAX_XFER_SIZE);
+	if (ntds_remaining == 0)
+		ntds_remaining = 1;
+
+	wurb = kzalloc(sizeof(struct whc_urb), mem_flags);
+	if (wurb == NULL)
+		goto err_no_mem;
+	urb->hcpriv = wurb;
+	wurb->qset = qset;
+	wurb->urb = urb;
+	INIT_WORK(&wurb->dequeue_work, urb_dequeue_work);
+
+	while (ntds_remaining) {
+		struct whc_std *std;
+		size_t std_len;
+
+		std = kmalloc(sizeof(struct whc_std), mem_flags);
+		if (std == NULL)
+			goto err_no_mem;
+
+		std_len = remaining;
+		if (std_len > QTD_MAX_XFER_SIZE)
+			std_len = QTD_MAX_XFER_SIZE;
+
+		std->urb = urb;
+		std->dma_addr = transfer_dma;
+		std->len = std_len;
+		std->ntds_remaining = ntds_remaining;
+		std->qtd = NULL;
+
+		INIT_LIST_HEAD(&std->list_node);
+		list_add_tail(&std->list_node, &qset->stds);
+
+		if (std_len > WHCI_PAGE_SIZE) {
+			if (qset_fill_page_list(whc, std, mem_flags) < 0)
+				goto err_no_mem;
+		} else
+			std->num_pointers = 0;
+
+		ntds_remaining--;
+		remaining -= std_len;
+		transfer_dma += std_len;
+	}
+
+	return 0;
+
+err_no_mem:
+	qset_free_stds(qset, urb);
+	return -ENOMEM;
+}
+
+/**
+ * qset_remove_urb - remove an URB from the urb queue.
+ *
+ * The URB is returned to the USB subsystem.
+ */
+void qset_remove_urb(struct whc *whc, struct whc_qset *qset,
+			    struct urb *urb, int status)
+{
+	struct wusbhc *wusbhc = &whc->wusbhc;
+	struct whc_urb *wurb = urb->hcpriv;
+
+	usb_hcd_unlink_urb_from_ep(&wusbhc->usb_hcd, urb);
+	/* Drop the lock as urb->complete() may enqueue another urb. */
+	spin_unlock(&whc->lock);
+	wusbhc_giveback_urb(wusbhc, urb, status);
+	spin_lock(&whc->lock);
+
+	kfree(wurb);
+}
+
+/**
+ * get_urb_status_from_qtd - get the completed urb status from qTD status
+ * @urb:    completed urb
+ * @status: qTD status
+ */
+static int get_urb_status_from_qtd(struct urb *urb, u32 status)
+{
+	if (status & QTD_STS_HALTED) {
+		if (status & QTD_STS_DBE)
+			return usb_pipein(urb->pipe) ? -ENOSR : -ECOMM;
+		else if (status & QTD_STS_BABBLE)
+			return -EOVERFLOW;
+		else if (status & QTD_STS_RCE)
+			return -ETIME;
+		return -EPIPE;
+	}
+	if (usb_pipein(urb->pipe)
+	    && (urb->transfer_flags & URB_SHORT_NOT_OK)
+	    && urb->actual_length < urb->transfer_buffer_length)
+		return -EREMOTEIO;
+	return 0;
+}
+
+/**
+ * process_inactive_qtd - process an inactive (but not halted) qTD.
+ *
+ * Update the urb with the transfer bytes from the qTD, if the urb is
+ * completely transfered or (in the case of an IN only) the LPF is
+ * set, then the transfer is complete and the urb should be returned
+ * to the system.
+ */
+void process_inactive_qtd(struct whc *whc, struct whc_qset *qset,
+				 struct whc_qtd *qtd)
+{
+	struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node);
+	struct urb *urb = std->urb;
+	uint32_t status;
+	bool complete;
+
+	status = le32_to_cpu(qtd->status);
+
+	urb->actual_length += std->len - QTD_STS_TO_LEN(status);
+
+	if (usb_pipein(urb->pipe) && (status & QTD_STS_LAST_PKT))
+		complete = true;
+	else
+		complete = whc_std_last(std);
+
+	qset_remove_qtd(whc, qset);
+	qset_free_std(whc, std);
+
+	/*
+	 * Transfers for this URB are complete?  Then return it to the
+	 * USB subsystem.
+	 */
+	if (complete) {
+		qset_remove_qtds(whc, qset, urb);
+		qset_remove_urb(whc, qset, urb, get_urb_status_from_qtd(urb, status));
+
+		/*
+		 * If iAlt isn't valid then the hardware didn't
+		 * advance iCur. Adjust the start and end pointers to
+		 * match iCur.
+		 */
+		if (!(status & QTD_STS_IALT_VALID))
+			qset->td_start = qset->td_end
+				= QH_STATUS_TO_ICUR(le16_to_cpu(qset->qh.status));
+		qset->pause_after_urb = NULL;
+	}
+}
+
+/**
+ * process_halted_qtd - process a qset with a halted qtd
+ *
+ * Remove all the qTDs for the failed URB and return the failed URB to
+ * the USB subsystem.  Then remove all other qTDs so the qset can be
+ * removed.
+ *
+ * FIXME: this is the point where rate adaptation can be done.  If a
+ * transfer failed because it exceeded the maximum number of retries
+ * then it could be reactivated with a slower rate without having to
+ * remove the qset.
+ */
+void process_halted_qtd(struct whc *whc, struct whc_qset *qset,
+			       struct whc_qtd *qtd)
+{
+	struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node);
+	struct urb *urb = std->urb;
+	int urb_status;
+
+	urb_status = get_urb_status_from_qtd(urb, le32_to_cpu(qtd->status));
+
+	qset_remove_qtds(whc, qset, urb);
+	qset_remove_urb(whc, qset, urb, urb_status);
+
+	list_for_each_entry(std, &qset->stds, list_node) {
+		if (qset->ntds == 0)
+			break;
+		qset_remove_qtd(whc, qset);
+		std->qtd = NULL;
+	}
+
+	qset->remove = 1;
+}
+
+void qset_free(struct whc *whc, struct whc_qset *qset)
+{
+	dma_pool_free(whc->qset_pool, qset, qset->qset_dma);
+}
+
+/**
+ * qset_delete - wait for a qset to be unused, then free it.
+ */
+void qset_delete(struct whc *whc, struct whc_qset *qset)
+{
+	wait_for_completion(&qset->remove_complete);
+	qset_free(whc, qset);
+}
diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h
new file mode 100644
index 0000000..1d2a53b
--- /dev/null
+++ b/drivers/usb/host/whci/whcd.h
@@ -0,0 +1,197 @@
+/*
+ * Wireless Host Controller (WHC) private header.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef __WHCD_H
+#define __WHCD_H
+
+#include <linux/uwb/whci.h>
+#include <linux/workqueue.h>
+
+#include "whci-hc.h"
+
+/* Generic command timeout. */
+#define WHC_GENCMD_TIMEOUT_MS 100
+
+
+struct whc {
+	struct wusbhc wusbhc;
+	struct umc_dev *umc;
+
+	resource_size_t base_phys;
+	void __iomem *base;
+	int irq;
+
+	u8 n_devices;
+	u8 n_keys;
+	u8 n_mmc_ies;
+
+	u64 *pz_list;
+	struct dn_buf_entry *dn_buf;
+	struct di_buf_entry *di_buf;
+	dma_addr_t pz_list_dma;
+	dma_addr_t dn_buf_dma;
+	dma_addr_t di_buf_dma;
+
+	spinlock_t   lock;
+	struct mutex mutex;
+
+	void *            gen_cmd_buf;
+	dma_addr_t        gen_cmd_buf_dma;
+	wait_queue_head_t cmd_wq;
+
+	struct workqueue_struct *workqueue;
+	struct work_struct       dn_work;
+
+	struct dma_pool *qset_pool;
+
+	struct list_head async_list;
+	struct list_head async_removed_list;
+	wait_queue_head_t async_list_wq;
+	struct work_struct async_work;
+
+	struct list_head periodic_list[5];
+	struct list_head periodic_removed_list;
+	wait_queue_head_t periodic_list_wq;
+	struct work_struct periodic_work;
+};
+
+#define wusbhc_to_whc(w) (container_of((w), struct whc, wusbhc))
+
+/**
+ * struct whc_std - a software TD.
+ * @urb: the URB this sTD is for.
+ * @offset: start of the URB's data for this TD.
+ * @len: the length of data in the associated TD.
+ * @ntds_remaining: number of TDs (starting from this one) in this transfer.
+ *
+ * Queued URBs may require more TDs than are available in a qset so we
+ * use a list of these "software TDs" (sTDs) to hold per-TD data.
+ */
+struct whc_std {
+	struct urb *urb;
+	size_t len;
+	int    ntds_remaining;
+	struct whc_qtd *qtd;
+
+	struct list_head list_node;
+	int num_pointers;
+	dma_addr_t dma_addr;
+	struct whc_page_list_entry *pl_virt;
+};
+
+/**
+ * struct whc_urb - per URB host controller structure.
+ * @urb: the URB this struct is for.
+ * @qset: the qset associated to the URB.
+ * @dequeue_work: the work to remove the URB when dequeued.
+ * @is_async: the URB belongs to async sheduler or not.
+ * @status: the status to be returned when calling wusbhc_giveback_urb.
+ */
+struct whc_urb {
+	struct urb *urb;
+	struct whc_qset *qset;
+	struct work_struct dequeue_work;
+	bool is_async;
+	int status;
+};
+
+/**
+ * whc_std_last - is this sTD the URB's last?
+ * @std: the sTD to check.
+ */
+static inline bool whc_std_last(struct whc_std *std)
+{
+	return std->ntds_remaining <= 1;
+}
+
+enum whc_update {
+	WHC_UPDATE_ADDED   = 0x01,
+	WHC_UPDATE_REMOVED = 0x02,
+	WHC_UPDATE_UPDATED = 0x04,
+};
+
+/* init.c */
+int whc_init(struct whc *whc);
+void whc_clean_up(struct whc *whc);
+
+/* hw.c */
+void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val);
+int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len);
+
+/* wusb.c */
+int whc_wusbhc_start(struct wusbhc *wusbhc);
+void whc_wusbhc_stop(struct wusbhc *wusbhc);
+int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt,
+		  u8 handle, struct wuie_hdr *wuie);
+int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle);
+int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm);
+int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev);
+int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots);
+int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid,
+		const void *ptk, size_t key_size);
+int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid,
+		const void *gtk, size_t key_size);
+int whc_set_cluster_id(struct whc *whc, u8 bcid);
+
+/* int.c */
+irqreturn_t whc_int_handler(struct usb_hcd *hcd);
+void whc_dn_work(struct work_struct *work);
+
+/* asl.c */
+void asl_start(struct whc *whc);
+void asl_stop(struct whc *whc);
+int  asl_init(struct whc *whc);
+void asl_clean_up(struct whc *whc);
+int  asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags);
+int  asl_urb_dequeue(struct whc *whc, struct urb *urb, int status);
+void asl_qset_delete(struct whc *whc, struct whc_qset *qset);
+void scan_async_work(struct work_struct *work);
+
+/* pzl.c */
+int  pzl_init(struct whc *whc);
+void pzl_clean_up(struct whc *whc);
+void pzl_start(struct whc *whc);
+void pzl_stop(struct whc *whc);
+int  pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags);
+int  pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status);
+void pzl_qset_delete(struct whc *whc, struct whc_qset *qset);
+void scan_periodic_work(struct work_struct *work);
+
+/* qset.c */
+struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags);
+void qset_free(struct whc *whc, struct whc_qset *qset);
+struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags);
+void qset_delete(struct whc *whc, struct whc_qset *qset);
+void qset_clear(struct whc *whc, struct whc_qset *qset);
+int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb,
+		 gfp_t mem_flags);
+void qset_free_std(struct whc *whc, struct whc_std *std);
+void qset_remove_urb(struct whc *whc, struct whc_qset *qset,
+			    struct urb *urb, int status);
+void process_halted_qtd(struct whc *whc, struct whc_qset *qset,
+			       struct whc_qtd *qtd);
+void process_inactive_qtd(struct whc *whc, struct whc_qset *qset,
+				 struct whc_qtd *qtd);
+enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset);
+void qset_remove_complete(struct whc *whc, struct whc_qset *qset);
+void dump_qset(struct whc_qset *qset, struct device *dev);
+void pzl_update(struct whc *whc, uint32_t wusbcmd);
+void asl_update(struct whc *whc, uint32_t wusbcmd);
+
+#endif /* #ifndef __WHCD_H */
diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h
new file mode 100644
index 0000000..bff1eb7
--- /dev/null
+++ b/drivers/usb/host/whci/whci-hc.h
@@ -0,0 +1,416 @@
+/*
+ * Wireless Host Controller (WHC) data structures.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef _WHCI_WHCI_HC_H
+#define _WHCI_WHCI_HC_H
+
+#include <linux/list.h>
+
+/**
+ * WHCI_PAGE_SIZE - page size use by WHCI
+ *
+ * WHCI assumes that host system uses pages of 4096 octets.
+ */
+#define WHCI_PAGE_SIZE 4096
+
+
+/**
+ * QTD_MAX_TXFER_SIZE - max number of bytes to transfer with a single
+ * qtd.
+ *
+ * This is 2^20 - 1.
+ */
+#define QTD_MAX_XFER_SIZE 1048575
+
+
+/**
+ * struct whc_qtd - Queue Element Transfer Descriptors (qTD)
+ *
+ * This describes the data for a bulk, control or interrupt transfer.
+ *
+ * [WHCI] section 3.2.4
+ */
+struct whc_qtd {
+	__le32 status; /*< remaining transfer len and transfer status */
+	__le32 options;
+	__le64 page_list_ptr; /*< physical pointer to data buffer page list*/
+	__u8   setup[8];      /*< setup data for control transfers */
+} __attribute__((packed));
+
+#define QTD_STS_ACTIVE     (1 << 31)  /* enable execution of transaction */
+#define QTD_STS_HALTED     (1 << 30)  /* transfer halted */
+#define QTD_STS_DBE        (1 << 29)  /* data buffer error */
+#define QTD_STS_BABBLE     (1 << 28)  /* babble detected */
+#define QTD_STS_RCE        (1 << 27)  /* retry count exceeded */
+#define QTD_STS_LAST_PKT   (1 << 26)  /* set Last Packet Flag in WUSB header */
+#define QTD_STS_INACTIVE   (1 << 25)  /* queue set is marked inactive */
+#define QTD_STS_IALT_VALID (1 << 23)                          /* iAlt field is valid */
+#define QTD_STS_IALT(i)    (QTD_STS_IALT_VALID | ((i) << 20)) /* iAlt field */
+#define QTD_STS_LEN(l)     ((l) << 0) /* transfer length */
+#define QTD_STS_TO_LEN(s)  ((s) & 0x000fffff)
+
+#define QTD_OPT_IOC      (1 << 1) /* page_list_ptr points to buffer directly */
+#define QTD_OPT_SMALL    (1 << 0) /* interrupt on complete */
+
+/**
+ * struct whc_itd - Isochronous Queue Element Transfer Descriptors (iTD)
+ *
+ * This describes the data and other parameters for an isochronous
+ * transfer.
+ *
+ * [WHCI] section 3.2.5
+ */
+struct whc_itd {
+	__le16 presentation_time;    /*< presentation time for OUT transfers */
+	__u8   num_segments;         /*< number of data segments in segment list */
+	__u8   status;               /*< command execution status */
+	__le32 options;              /*< misc transfer options */
+	__le64 page_list_ptr;        /*< physical pointer to data buffer page list */
+	__le64 seg_list_ptr;         /*< physical pointer to segment list */
+} __attribute__((packed));
+
+#define ITD_STS_ACTIVE   (1 << 7) /* enable execution of transaction */
+#define ITD_STS_DBE      (1 << 5) /* data buffer error */
+#define ITD_STS_BABBLE   (1 << 4) /* babble detected */
+#define ITD_STS_INACTIVE (1 << 1) /* queue set is marked inactive */
+
+#define ITD_OPT_IOC      (1 << 1) /* interrupt on complete */
+#define ITD_OPT_SMALL    (1 << 0) /* page_list_ptr points to buffer directly */
+
+/**
+ * Page list entry.
+ *
+ * A TD's page list must contain sufficient page list entries for the
+ * total data length in the TD.
+ *
+ * [WHCI] section 3.2.4.3
+ */
+struct whc_page_list_entry {
+	__le64 buf_ptr; /*< physical pointer to buffer */
+} __attribute__((packed));
+
+/**
+ * struct whc_seg_list_entry - Segment list entry.
+ *
+ * Describes a portion of the data buffer described in the containing
+ * qTD's page list.
+ *
+ * seg_ptr = qtd->page_list_ptr[qtd->seg_list_ptr[seg].idx].buf_ptr
+ *           + qtd->seg_list_ptr[seg].offset;
+ *
+ * Segments can't cross page boundries.
+ *
+ * [WHCI] section 3.2.5.5
+ */
+struct whc_seg_list_entry {
+	__le16 len;    /*< segment length */
+	__u8   idx;    /*< index into page list */
+	__u8   status; /*< segment status */
+	__le16 offset; /*< 12 bit offset into page */
+} __attribute__((packed));
+
+/**
+ * struct whc_qhead - endpoint and status information for a qset.
+ *
+ * [WHCI] section 3.2.6
+ */
+struct whc_qhead {
+	__le64 link; /*< next qset in list */
+	__le32 info1;
+	__le32 info2;
+	__le32 info3;
+	__le16 status;
+	__le16 err_count;  /*< transaction error count */
+	__le32 cur_window;
+	__le32 scratch[3]; /*< h/w scratch area */
+	union {
+		struct whc_qtd qtd;
+		struct whc_itd itd;
+	} overlay;
+} __attribute__((packed));
+
+#define QH_LINK_PTR_MASK (~0x03Full)
+#define QH_LINK_PTR(ptr) ((ptr) & QH_LINK_PTR_MASK)
+#define QH_LINK_IQS      (1 << 4) /* isochronous queue set */
+#define QH_LINK_NTDS(n)  (((n) - 1) << 1) /* number of TDs in queue set */
+#define QH_LINK_T        (1 << 0) /* last queue set in periodic schedule list */
+
+#define QH_INFO1_EP(e)           ((e) << 0)  /* endpoint number */
+#define QH_INFO1_DIR_IN          (1 << 4)    /* IN transfer */
+#define QH_INFO1_DIR_OUT         (0 << 4)    /* OUT transfer */
+#define QH_INFO1_TR_TYPE_CTRL    (0x0 << 5)  /* control transfer */
+#define QH_INFO1_TR_TYPE_ISOC    (0x1 << 5)  /* isochronous transfer */
+#define QH_INFO1_TR_TYPE_BULK    (0x2 << 5)  /* bulk transfer */
+#define QH_INFO1_TR_TYPE_INT     (0x3 << 5)  /* interrupt */
+#define QH_INFO1_TR_TYPE_LP_INT  (0x7 << 5)  /* low power interrupt */
+#define QH_INFO1_DEV_INFO_IDX(i) ((i) << 8)  /* index into device info buffer */
+#define QH_INFO1_SET_INACTIVE    (1 << 15)   /* set inactive after transfer */
+#define QH_INFO1_MAX_PKT_LEN(l)  ((l) << 16) /* maximum packet length */
+
+#define QH_INFO2_BURST(b)        ((b) << 0)  /* maximum burst length */
+#define QH_INFO2_DBP(p)          ((p) << 5)  /* data burst policy (see [WUSB] table 5-7) */
+#define QH_INFO2_MAX_COUNT(c)    ((c) << 8)  /* max isoc/int pkts per zone */
+#define QH_INFO2_RQS             (1 << 15)   /* reactivate queue set */
+#define QH_INFO2_MAX_RETRY(r)    ((r) << 16) /* maximum transaction retries */
+#define QH_INFO2_MAX_SEQ(s)      ((s) << 20) /* maximum sequence number */
+#define QH_INFO3_MAX_DELAY(d)    ((d) << 0)  /* maximum stream delay in 125 us units (isoc only) */
+#define QH_INFO3_INTERVAL(i)     ((i) << 16) /* segment interval in 125 us units (isoc only) */
+
+#define QH_INFO3_TX_RATE_53_3    (0 << 24)
+#define QH_INFO3_TX_RATE_80      (1 << 24)
+#define QH_INFO3_TX_RATE_106_7   (2 << 24)
+#define QH_INFO3_TX_RATE_160     (3 << 24)
+#define QH_INFO3_TX_RATE_200     (4 << 24)
+#define QH_INFO3_TX_RATE_320     (5 << 24)
+#define QH_INFO3_TX_RATE_400     (6 << 24)
+#define QH_INFO3_TX_RATE_480     (7 << 24)
+#define QH_INFO3_TX_PWR(p)       ((p) << 29) /* transmit power (see [WUSB] section 5.2.1.2) */
+
+#define QH_STATUS_FLOW_CTRL      (1 << 15)
+#define QH_STATUS_ICUR(i)        ((i) << 5)
+#define QH_STATUS_TO_ICUR(s)     (((s) >> 5) & 0x7)
+
+/**
+ * usb_pipe_to_qh_type - USB core pipe type to QH transfer type
+ *
+ * Returns the QH type field for a USB core pipe type.
+ */
+static inline unsigned usb_pipe_to_qh_type(unsigned pipe)
+{
+	static const unsigned type[] = {
+		[PIPE_ISOCHRONOUS] = QH_INFO1_TR_TYPE_ISOC,
+		[PIPE_INTERRUPT]   = QH_INFO1_TR_TYPE_INT,
+		[PIPE_CONTROL]     = QH_INFO1_TR_TYPE_CTRL,
+		[PIPE_BULK]        = QH_INFO1_TR_TYPE_BULK,
+	};
+	return type[usb_pipetype(pipe)];
+}
+
+/**
+ * Maxiumum number of TDs in a qset.
+ */
+#define WHCI_QSET_TD_MAX 8
+
+/**
+ * struct whc_qset - WUSB data transfers to a specific endpoint
+ * @qh: the QHead of this qset
+ * @qtd: up to 8 qTDs (for qsets for control, bulk and interrupt
+ * transfers)
+ * @itd: up to 8 iTDs (for qsets for isochronous transfers)
+ * @qset_dma: DMA address for this qset
+ * @whc: WHCI HC this qset is for
+ * @ep: endpoint
+ * @stds: list of sTDs queued to this qset
+ * @ntds: number of qTDs queued (not necessarily the same as nTDs
+ * field in the QH)
+ * @td_start: index of the first qTD in the list
+ * @td_end: index of next free qTD in the list (provided
+ *          ntds < WHCI_QSET_TD_MAX)
+ *
+ * Queue Sets (qsets) are added to the asynchronous schedule list
+ * (ASL) or the periodic zone list (PZL).
+ *
+ * qsets may contain up to 8 TDs (either qTDs or iTDs as appropriate).
+ * Each TD may refer to at most 1 MiB of data. If a single transfer
+ * has > 8MiB of data, TDs can be reused as they are completed since
+ * the TD list is used as a circular buffer.  Similarly, several
+ * (smaller) transfers may be queued in a qset.
+ *
+ * WHCI controllers may cache portions of the qsets in the ASL and
+ * PZL, requiring the WHCD to inform the WHC that the lists have been
+ * updated (fields changed or qsets inserted or removed).  For safe
+ * insertion and removal of qsets from the lists the schedule must be
+ * stopped to avoid races in updating the QH link pointers.
+ *
+ * Since the HC is free to execute qsets in any order, all transfers
+ * to an endpoint should use the same qset to ensure transfers are
+ * executed in the order they're submitted.
+ *
+ * [WHCI] section 3.2.3
+ */
+struct whc_qset {
+	struct whc_qhead qh;
+	union {
+		struct whc_qtd qtd[WHCI_QSET_TD_MAX];
+		struct whc_itd itd[WHCI_QSET_TD_MAX];
+	};
+
+	/* private data for WHCD */
+	dma_addr_t qset_dma;
+	struct whc *whc;
+	struct usb_host_endpoint *ep;
+	struct list_head stds;
+	int ntds;
+	int td_start;
+	int td_end;
+	struct list_head list_node;
+	unsigned in_sw_list:1;
+	unsigned in_hw_list:1;
+	unsigned remove:1;
+	struct urb *pause_after_urb;
+	struct completion remove_complete;
+	int max_burst;
+	int max_seq;
+};
+
+static inline void whc_qset_set_link_ptr(u64 *ptr, u64 target)
+{
+	if (target)
+		*ptr = (*ptr & ~(QH_LINK_PTR_MASK | QH_LINK_T)) | QH_LINK_PTR(target);
+	else
+		*ptr = QH_LINK_T;
+}
+
+/**
+ * struct di_buf_entry - Device Information (DI) buffer entry.
+ *
+ * There's one of these per connected device.
+ */
+struct di_buf_entry {
+	__le32 availability_info[8]; /*< MAS availability information, one MAS per bit */
+	__le32 addr_sec_info;        /*< addressing and security info */
+	__le32 reserved[7];
+} __attribute__((packed));
+
+#define WHC_DI_SECURE           (1 << 31)
+#define WHC_DI_DISABLE          (1 << 30)
+#define WHC_DI_KEY_IDX(k)       ((k) << 8)
+#define WHC_DI_KEY_IDX_MASK     0x0000ff00
+#define WHC_DI_DEV_ADDR(a)      ((a) << 0)
+#define WHC_DI_DEV_ADDR_MASK    0x000000ff
+
+/**
+ * struct dn_buf_entry - Device Notification (DN) buffer entry.
+ *
+ * [WHCI] section 3.2.8
+ */
+struct dn_buf_entry {
+	__u8   msg_size;    /*< number of octets of valid DN data */
+	__u8   reserved1;
+	__u8   src_addr;    /*< source address */
+	__u8   status;      /*< buffer entry status */
+	__le32 tkid;        /*< TKID for source device, valid if secure bit is set */
+	__u8   dn_data[56]; /*< up to 56 octets of DN data */
+} __attribute__((packed));
+
+#define WHC_DN_STATUS_VALID  (1 << 7) /* buffer entry is valid */
+#define WHC_DN_STATUS_SECURE (1 << 6) /* notification received using secure frame */
+
+#define WHC_N_DN_ENTRIES (4096 / sizeof(struct dn_buf_entry))
+
+/* The Add MMC IE WUSB Generic Command may take up to 256 bytes of
+   data. [WHCI] section 2.4.7. */
+#define WHC_GEN_CMD_DATA_LEN 256
+
+/*
+ * HC registers.
+ *
+ * [WHCI] section 2.4
+ */
+
+#define WHCIVERSION          0x00
+
+#define WHCSPARAMS           0x04
+#  define WHCSPARAMS_TO_N_MMC_IES(p) (((p) >> 16) & 0xff)
+#  define WHCSPARAMS_TO_N_KEYS(p)    (((p) >> 8) & 0xff)
+#  define WHCSPARAMS_TO_N_DEVICES(p) (((p) >> 0) & 0x7f)
+
+#define WUSBCMD              0x08
+#  define WUSBCMD_BCID(b)            ((b) << 16)
+#  define WUSBCMD_BCID_MASK          (0xff << 16)
+#  define WUSBCMD_ASYNC_QSET_RM      (1 << 12)
+#  define WUSBCMD_PERIODIC_QSET_RM   (1 << 11)
+#  define WUSBCMD_WUSBSI(s)          ((s) << 8)
+#  define WUSBCMD_WUSBSI_MASK        (0x7 << 8)
+#  define WUSBCMD_ASYNC_SYNCED_DB    (1 << 7)
+#  define WUSBCMD_PERIODIC_SYNCED_DB (1 << 6)
+#  define WUSBCMD_ASYNC_UPDATED      (1 << 5)
+#  define WUSBCMD_PERIODIC_UPDATED   (1 << 4)
+#  define WUSBCMD_ASYNC_EN           (1 << 3)
+#  define WUSBCMD_PERIODIC_EN        (1 << 2)
+#  define WUSBCMD_WHCRESET           (1 << 1)
+#  define WUSBCMD_RUN                (1 << 0)
+
+#define WUSBSTS              0x0c
+#  define WUSBSTS_ASYNC_SCHED             (1 << 15)
+#  define WUSBSTS_PERIODIC_SCHED          (1 << 14)
+#  define WUSBSTS_DNTS_SCHED              (1 << 13)
+#  define WUSBSTS_HCHALTED                (1 << 12)
+#  define WUSBSTS_GEN_CMD_DONE            (1 << 9)
+#  define WUSBSTS_CHAN_TIME_ROLLOVER      (1 << 8)
+#  define WUSBSTS_DNTS_OVERFLOW           (1 << 7)
+#  define WUSBSTS_BPST_ADJUSTMENT_CHANGED (1 << 6)
+#  define WUSBSTS_HOST_ERR                (1 << 5)
+#  define WUSBSTS_ASYNC_SCHED_SYNCED      (1 << 4)
+#  define WUSBSTS_PERIODIC_SCHED_SYNCED   (1 << 3)
+#  define WUSBSTS_DNTS_INT                (1 << 2)
+#  define WUSBSTS_ERR_INT                 (1 << 1)
+#  define WUSBSTS_INT                     (1 << 0)
+#  define WUSBSTS_INT_MASK                0x3ff
+
+#define WUSBINTR             0x10
+#  define WUSBINTR_GEN_CMD_DONE             (1 << 9)
+#  define WUSBINTR_CHAN_TIME_ROLLOVER       (1 << 8)
+#  define WUSBINTR_DNTS_OVERFLOW            (1 << 7)
+#  define WUSBINTR_BPST_ADJUSTMENT_CHANGED  (1 << 6)
+#  define WUSBINTR_HOST_ERR                 (1 << 5)
+#  define WUSBINTR_ASYNC_SCHED_SYNCED       (1 << 4)
+#  define WUSBINTR_PERIODIC_SCHED_SYNCED    (1 << 3)
+#  define WUSBINTR_DNTS_INT                 (1 << 2)
+#  define WUSBINTR_ERR_INT                  (1 << 1)
+#  define WUSBINTR_INT                      (1 << 0)
+#  define WUSBINTR_ALL 0x3ff
+
+#define WUSBGENCMDSTS        0x14
+#  define WUSBGENCMDSTS_ACTIVE (1 << 31)
+#  define WUSBGENCMDSTS_ERROR  (1 << 24)
+#  define WUSBGENCMDSTS_IOC    (1 << 23)
+#  define WUSBGENCMDSTS_MMCIE_ADD 0x01
+#  define WUSBGENCMDSTS_MMCIE_RM  0x02
+#  define WUSBGENCMDSTS_SET_MAS   0x03
+#  define WUSBGENCMDSTS_CHAN_STOP 0x04
+#  define WUSBGENCMDSTS_RWP_EN    0x05
+
+#define WUSBGENCMDPARAMS     0x18
+#define WUSBGENADDR          0x20
+#define WUSBASYNCLISTADDR    0x28
+#define WUSBDNTSBUFADDR      0x30
+#define WUSBDEVICEINFOADDR   0x38
+
+#define WUSBSETSECKEYCMD     0x40
+#  define WUSBSETSECKEYCMD_SET    (1 << 31)
+#  define WUSBSETSECKEYCMD_ERASE  (1 << 30)
+#  define WUSBSETSECKEYCMD_GTK    (1 << 8)
+#  define WUSBSETSECKEYCMD_IDX(i) ((i) << 0)
+
+#define WUSBTKID             0x44
+#define WUSBSECKEY           0x48
+#define WUSBPERIODICLISTBASE 0x58
+#define WUSBMASINDEX         0x60
+
+#define WUSBDNTSCTRL         0x64
+#  define WUSBDNTSCTRL_ACTIVE      (1 << 31)
+#  define WUSBDNTSCTRL_INTERVAL(i) ((i) << 8)
+#  define WUSBDNTSCTRL_SLOTS(s)    ((s) << 0)
+
+#define WUSBTIME             0x68
+#define WUSBBPST             0x6c
+#define WUSBDIBUPDATED       0x70
+
+#endif /* #ifndef _WHCI_WHCI_HC_H */
diff --git a/drivers/usb/host/whci/wusb.c b/drivers/usb/host/whci/wusb.c
new file mode 100644
index 0000000..66e4ddc
--- /dev/null
+++ b/drivers/usb/host/whci/wusb.c
@@ -0,0 +1,241 @@
+/*
+ * Wireless Host Controller (WHC) WUSB operations.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/uwb/umc.h>
+#define D_LOCAL 1
+#include <linux/uwb/debug.h>
+
+#include "../../wusbcore/wusbhc.h"
+
+#include "whcd.h"
+
+#if D_LOCAL >= 1
+static void dump_di(struct whc *whc, int idx)
+{
+	struct di_buf_entry *di = &whc->di_buf[idx];
+	struct device *dev = &whc->umc->dev;
+	char buf[128];
+
+	bitmap_scnprintf(buf, sizeof(buf), (unsigned long *)di->availability_info, UWB_NUM_MAS);
+
+	d_printf(1, dev, "DI[%d]\n", idx);
+	d_printf(1, dev, "  availability: %s\n", buf);
+	d_printf(1, dev, "  %c%c key idx: %d dev addr: %d\n",
+		 (di->addr_sec_info & WHC_DI_SECURE) ? 'S' : ' ',
+		 (di->addr_sec_info & WHC_DI_DISABLE) ? 'D' : ' ',
+		 (di->addr_sec_info & WHC_DI_KEY_IDX_MASK) >> 8,
+		 (di->addr_sec_info & WHC_DI_DEV_ADDR_MASK));
+}
+#else
+static inline void dump_di(struct whc *whc, int idx)
+{
+}
+#endif
+
+static int whc_update_di(struct whc *whc, int idx)
+{
+	int offset = idx / 32;
+	u32 bit = 1 << (idx % 32);
+
+	dump_di(whc, idx);
+
+	le_writel(bit, whc->base + WUSBDIBUPDATED + offset);
+
+	return whci_wait_for(&whc->umc->dev,
+			     whc->base + WUSBDIBUPDATED + offset, bit, 0,
+			     100, "DI update");
+}
+
+/*
+ * WHCI starts and stops MMCs based on there being a valid GTK so
+ * these need only start/stop the asynchronous and periodic schedules.
+ */
+
+int whc_wusbhc_start(struct wusbhc *wusbhc)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+
+	asl_start(whc);
+	pzl_start(whc);
+
+	return 0;
+}
+
+void whc_wusbhc_stop(struct wusbhc *wusbhc)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+
+	pzl_stop(whc);
+	asl_stop(whc);
+}
+
+int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt,
+		  u8 handle, struct wuie_hdr *wuie)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	u32 params;
+
+	params = (interval << 24)
+		| (repeat_cnt << 16)
+		| (wuie->bLength << 8)
+		| handle;
+
+	return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_ADD, params, wuie, wuie->bLength);
+}
+
+int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	u32 params;
+
+	params = handle;
+
+	return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_RM, params, NULL, 0);
+}
+
+int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+
+	if (stream_index >= 0)
+		whc_write_wusbcmd(whc, WUSBCMD_WUSBSI_MASK, WUSBCMD_WUSBSI(stream_index));
+
+	return whc_do_gencmd(whc, WUSBGENCMDSTS_SET_MAS, 0, (void *)mas_bm, sizeof(*mas_bm));
+}
+
+int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	int idx = wusb_dev->port_idx;
+	struct di_buf_entry *di = &whc->di_buf[idx];
+	int ret;
+
+	mutex_lock(&whc->mutex);
+
+	uwb_mas_bm_copy_le(di->availability_info, &wusb_dev->availability);
+	di->addr_sec_info &= ~(WHC_DI_DISABLE | WHC_DI_DEV_ADDR_MASK);
+	di->addr_sec_info |= WHC_DI_DEV_ADDR(wusb_dev->addr);
+
+	ret = whc_update_di(whc, idx);
+
+	mutex_unlock(&whc->mutex);
+
+	return ret;
+}
+
+/*
+ * Set the number of Device Notification Time Slots (DNTS) and enable
+ * device notifications.
+ */
+int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	u32 dntsctrl;
+
+	dntsctrl = WUSBDNTSCTRL_ACTIVE
+		| WUSBDNTSCTRL_INTERVAL(interval)
+		| WUSBDNTSCTRL_SLOTS(slots);
+
+	le_writel(dntsctrl, whc->base + WUSBDNTSCTRL);
+
+	return 0;
+}
+
+static int whc_set_key(struct whc *whc, u8 key_index, uint32_t tkid,
+		       const void *key, size_t key_size, bool is_gtk)
+{
+	uint32_t setkeycmd;
+	uint32_t seckey[4];
+	int i;
+	int ret;
+
+	memcpy(seckey, key, key_size);
+	setkeycmd = WUSBSETSECKEYCMD_SET | WUSBSETSECKEYCMD_IDX(key_index);
+	if (is_gtk)
+		setkeycmd |= WUSBSETSECKEYCMD_GTK;
+
+	le_writel(tkid, whc->base + WUSBTKID);
+	for (i = 0; i < 4; i++)
+		le_writel(seckey[i], whc->base + WUSBSECKEY + 4*i);
+	le_writel(setkeycmd, whc->base + WUSBSETSECKEYCMD);
+
+	ret = whci_wait_for(&whc->umc->dev, whc->base + WUSBSETSECKEYCMD,
+			    WUSBSETSECKEYCMD_SET, 0, 100, "set key");
+
+	return ret;
+}
+
+/**
+ * whc_set_ptk - set the PTK to use for a device.
+ *
+ * The index into the key table for this PTK is the same as the
+ * device's port index.
+ */
+int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid,
+		const void *ptk, size_t key_size)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	struct di_buf_entry *di = &whc->di_buf[port_idx];
+	int ret;
+
+	mutex_lock(&whc->mutex);
+
+	if (ptk) {
+		ret = whc_set_key(whc, port_idx, tkid, ptk, key_size, false);
+		if (ret)
+			goto out;
+
+		di->addr_sec_info &= ~WHC_DI_KEY_IDX_MASK;
+		di->addr_sec_info |= WHC_DI_SECURE | WHC_DI_KEY_IDX(port_idx);
+	} else
+		di->addr_sec_info &= ~WHC_DI_SECURE;
+
+	ret = whc_update_di(whc, port_idx);
+out:
+	mutex_unlock(&whc->mutex);
+	return ret;
+}
+
+/**
+ * whc_set_gtk - set the GTK for subsequent broadcast packets
+ *
+ * The GTK is stored in the last entry in the key table (the previous
+ * N_DEVICES entries are for the per-device PTKs).
+ */
+int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid,
+		const void *gtk, size_t key_size)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	int ret;
+
+	mutex_lock(&whc->mutex);
+
+	ret = whc_set_key(whc, whc->n_devices, tkid, gtk, key_size, true);
+
+	mutex_unlock(&whc->mutex);
+
+	return ret;
+}
+
+int whc_set_cluster_id(struct whc *whc, u8 bcid)
+{
+	whc_write_wusbcmd(whc, WUSBCMD_BCID_MASK, WUSBCMD_BCID(bcid));
+	return 0;
+}
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index b358c4e..444c69c 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1561,8 +1561,7 @@
 	if (code != USBTEST_REQUEST)
 		return -EOPNOTSUPP;
 
-	if (param->iterations <= 0 || param->length < 0
-			|| param->sglen < 0 || param->vary < 0)
+	if (param->iterations <= 0)
 		return -EINVAL;
 
 	if (mutex_lock_interruptible(&dev->lock))
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 3d87eab..bd07eaa 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -95,11 +95,20 @@
 #define HUAWEI_PRODUCT_E220			0x1003
 #define HUAWEI_PRODUCT_E220BIS			0x1004
 #define HUAWEI_PRODUCT_E1401			0x1401
+#define HUAWEI_PRODUCT_E1402			0x1402
 #define HUAWEI_PRODUCT_E1403			0x1403
+#define HUAWEI_PRODUCT_E1404			0x1404
 #define HUAWEI_PRODUCT_E1405			0x1405
 #define HUAWEI_PRODUCT_E1406			0x1406
+#define HUAWEI_PRODUCT_E1407			0x1407
 #define HUAWEI_PRODUCT_E1408			0x1408
 #define HUAWEI_PRODUCT_E1409			0x1409
+#define HUAWEI_PRODUCT_E140A			0x140A
+#define HUAWEI_PRODUCT_E140B			0x140B
+#define HUAWEI_PRODUCT_E140C			0x140C
+#define HUAWEI_PRODUCT_E140D			0x140D
+#define HUAWEI_PRODUCT_E140E			0x140E
+#define HUAWEI_PRODUCT_E140F			0x140F
 #define HUAWEI_PRODUCT_E1410			0x1410
 #define HUAWEI_PRODUCT_E1411			0x1411
 #define HUAWEI_PRODUCT_E1412			0x1412
@@ -110,6 +119,44 @@
 #define HUAWEI_PRODUCT_E1417			0x1417
 #define HUAWEI_PRODUCT_E1418			0x1418
 #define HUAWEI_PRODUCT_E1419			0x1419
+#define HUAWEI_PRODUCT_E141A			0x141A
+#define HUAWEI_PRODUCT_E141B			0x141B
+#define HUAWEI_PRODUCT_E141C			0x141C
+#define HUAWEI_PRODUCT_E141D			0x141D
+#define HUAWEI_PRODUCT_E141E			0x141E
+#define HUAWEI_PRODUCT_E141F			0x141F
+#define HUAWEI_PRODUCT_E1420			0x1420
+#define HUAWEI_PRODUCT_E1421			0x1421
+#define HUAWEI_PRODUCT_E1422			0x1422
+#define HUAWEI_PRODUCT_E1423			0x1423
+#define HUAWEI_PRODUCT_E1424			0x1424
+#define HUAWEI_PRODUCT_E1425			0x1425
+#define HUAWEI_PRODUCT_E1426			0x1426
+#define HUAWEI_PRODUCT_E1427			0x1427
+#define HUAWEI_PRODUCT_E1428			0x1428
+#define HUAWEI_PRODUCT_E1429			0x1429
+#define HUAWEI_PRODUCT_E142A			0x142A
+#define HUAWEI_PRODUCT_E142B			0x142B
+#define HUAWEI_PRODUCT_E142C			0x142C
+#define HUAWEI_PRODUCT_E142D			0x142D
+#define HUAWEI_PRODUCT_E142E			0x142E
+#define HUAWEI_PRODUCT_E142F			0x142F
+#define HUAWEI_PRODUCT_E1430			0x1430
+#define HUAWEI_PRODUCT_E1431			0x1431
+#define HUAWEI_PRODUCT_E1432			0x1432
+#define HUAWEI_PRODUCT_E1433			0x1433
+#define HUAWEI_PRODUCT_E1434			0x1434
+#define HUAWEI_PRODUCT_E1435			0x1435
+#define HUAWEI_PRODUCT_E1436			0x1436
+#define HUAWEI_PRODUCT_E1437			0x1437
+#define HUAWEI_PRODUCT_E1438			0x1438
+#define HUAWEI_PRODUCT_E1439			0x1439
+#define HUAWEI_PRODUCT_E143A			0x143A
+#define HUAWEI_PRODUCT_E143B			0x143B
+#define HUAWEI_PRODUCT_E143C			0x143C
+#define HUAWEI_PRODUCT_E143D			0x143D
+#define HUAWEI_PRODUCT_E143E			0x143E
+#define HUAWEI_PRODUCT_E143F			0x143F
 
 #define NOVATELWIRELESS_VENDOR_ID		0x1410
 
@@ -207,6 +254,7 @@
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
 #define ZTE_PRODUCT_MF628			0x0015
+#define ZTE_PRODUCT_MF626			0x0031
 #define ZTE_PRODUCT_CDMA_TECH			0xfffe
 
 /* Ericsson products */
@@ -248,11 +296,20 @@
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1402, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1404, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1407, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140A, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140B, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140C, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140D, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140E, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140F, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412, 0xff, 0xff, 0xff) },
@@ -263,6 +320,44 @@
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141A, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141B, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141C, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141D, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141E, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141F, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1420, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1421, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1422, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1423, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1424, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1425, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1426, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1427, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1428, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1429, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142A, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142B, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142C, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142D, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142E, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142F, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1430, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1431, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1432, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1433, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1434, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1435, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1436, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1437, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1438, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1439, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143A, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143B, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143C, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */
@@ -336,6 +431,7 @@
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
 	{ USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) },
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 4995bb5..2dd9bd4 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -95,11 +95,10 @@
 {
 	int result;
 
-	us->iobuf[0] = 0x1;
 	result = usb_stor_control_msg(us, us->send_ctrl_pipe,
 				      USB_REQ_SET_FEATURE,
 				      USB_TYPE_STANDARD | USB_RECIP_DEVICE,
-				      0x01, 0x0, us->iobuf, 0x1, 1000);
+				      0x01, 0x0, NULL, 0x0, 1000);
 	US_DEBUGP("usb_control_msg performing result is %d\n", result);
 	return (result ? 0 : -1);
 }
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index cd15547..a2b9ebbe 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1628,97 +1628,332 @@
 /* Reported by fangxiaozhi <huananhu@huawei.com>
  * This brings the HUAWEI data card devices into multi-port mode
  */
-UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x1001, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x1003, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x1004, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x1401, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x1402, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x1403, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x1404, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x1405, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x1406, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x1407, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x1408, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x1409, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x140A, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x140B, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x140C, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x140D, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x140E, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x140F, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
-UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
+UNUSUAL_DEV(  0x12d1, 0x1410, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1411, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1412, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1413, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1414, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1415, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1416, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1417, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1418, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1419, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1420, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1421, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1422, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1423, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1424, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1425, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1426, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1427, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1428, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1429, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1430, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1431, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1432, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1433, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1434, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1435, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1436, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1437, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1438, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1439, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143F, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
@@ -1745,6 +1980,15 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br>
+ * JMicron responds to USN and several other SCSI ioctls with a
+ * residue that causes subsequent I/O requests to fail.  */
+UNUSUAL_DEV(  0x152d, 0x2329, 0x0100, 0x0100,
+	        "JMicron",
+	        "USB to ATA/ATAPI Bridge",
+	        US_SC_DEVICE, US_PR_DEVICE, NULL,
+	        US_FL_IGNORE_RESIDUE ),
+
 /* Reported by Robert Schedel <r.schedel@yahoo.de>
  * Note: this is a 'super top' device like the above 14cd/6600 device */
 UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
@@ -1818,6 +2062,15 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
+ * Mio Moov 330
+ */
+UNUSUAL_DEV(  0x3340, 0xffff, 0x0000, 0x0000,
+		"Mitac",
+		"Mio DigiWalker USB Sync",
+		US_SC_DEVICE,US_PR_DEVICE,NULL,
+		US_FL_MAX_SECTORS_64 ),
+
 /* Reported by Andrey Rahmatullin <wrar@altlinux.org> */
 UNUSUAL_DEV(  0x4102, 0x1020, 0x0100,  0x0100,
 		"iRiver",
diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig
new file mode 100644
index 0000000..eb09a0a
--- /dev/null
+++ b/drivers/usb/wusbcore/Kconfig
@@ -0,0 +1,41 @@
+#
+# Wireless USB Core configuration
+#
+config USB_WUSB
+	tristate "Enable Wireless USB extensions (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on USB
+        select UWB
+        select CRYPTO
+        select CRYPTO_BLKCIPHER
+        select CRYPTO_CBC
+        select CRYPTO_MANAGER
+        select CRYPTO_AES
+	help
+	  Enable the host-side support for Wireless USB.
+
+          To compile this support select Y (built in). It is safe to
+	  select even if you don't have the hardware.
+
+config USB_WUSB_CBAF
+	tristate "Support WUSB Cable Based Association (CBA)"
+	depends on USB
+	help
+	  Some WUSB devices support Cable Based Association. It's used to
+	  enable the secure communication between the host and the
+	  device.
+
+	  Enable this option if your WUSB device must to be connected
+	  via wired USB before establishing a wireless link.
+
+	  It is safe to select even if you don't have a compatible
+	  hardware.
+
+config USB_WUSB_CBAF_DEBUG
+	bool "Enable CBA debug messages"
+	depends on USB_WUSB_CBAF
+	help
+	  Say Y here if you want the CBA to produce a bunch of debug messages
+	  to the system log. Select this if you are having a problem with
+	  CBA support and want to see more of what is going on.
+
diff --git a/drivers/usb/wusbcore/Makefile b/drivers/usb/wusbcore/Makefile
new file mode 100644
index 0000000..75f1ade
--- /dev/null
+++ b/drivers/usb/wusbcore/Makefile
@@ -0,0 +1,26 @@
+obj-$(CONFIG_USB_WUSB)		+= wusbcore.o
+obj-$(CONFIG_USB_HWA_HCD)	+= wusb-wa.o
+obj-$(CONFIG_USB_WUSB_CBAF)	+= wusb-cbaf.o
+
+
+wusbcore-objs := 	\
+	crypto.o	\
+	devconnect.o	\
+	dev-sysfs.o	\
+	mmc.o		\
+	pal.o		\
+	rh.o		\
+	reservation.o	\
+	security.o	\
+	wusbhc.o
+
+wusb-cbaf-objs := cbaf.o
+
+wusb-wa-objs :=	wa-hc.o		\
+		wa-nep.o	\
+		wa-rpipe.o	\
+		wa-xfer.o
+
+ifeq ($(CONFIG_USB_WUSB_CBAF_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c
new file mode 100644
index 0000000..ab4788d
--- /dev/null
+++ b/drivers/usb/wusbcore/cbaf.c
@@ -0,0 +1,673 @@
+/*
+ * Wireless USB - Cable Based Association
+ *
+ *
+ * Copyright (C) 2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * WUSB devices have to be paired (associated in WUSB lingo) so
+ * that they can connect to the system.
+ *
+ * One way of pairing is using CBA-Cable Based Association. First
+ * time you plug the device with a cable, association is done between
+ * host and device and subsequent times, you can connect wirelessly
+ * without having to associate again. That's the idea.
+ *
+ * This driver does nothing Earth shattering. It just provides an
+ * interface to chat with the wire-connected device so we can get a
+ * CDID (device ID) that might have been previously associated to a
+ * CHID (host ID) and to set up a new <CHID,CDID,CK> triplet
+ * (connection context), with the CK being the secret, or connection
+ * key. This is the pairing data.
+ *
+ * When a device with the CBA capability connects, the probe routine
+ * just creates a bunch of sysfs files that a user space enumeration
+ * manager uses to allow it to connect wirelessly to the system or not.
+ *
+ * The process goes like this:
+ *
+ * 1. Device plugs, cbaf is loaded, notifications happen.
+ *
+ * 2. The connection manager (CM) sees a device with CBAF capability
+ *    (the wusb_chid etc. files in /sys/devices/blah/OURDEVICE).
+ *
+ * 3. The CM writes the host name, supported band groups, and the CHID
+ *    (host ID) into the wusb_host_name, wusb_host_band_groups and
+ *    wusb_chid files. These get sent to the device and the CDID (if
+ *    any) for this host is requested.
+ *
+ * 4. The CM can verify that the device's supported band groups
+ *    (wusb_device_band_groups) are compatible with the host.
+ *
+ * 5. The CM reads the wusb_cdid file.
+ *
+ * 6. The CM looks up its database
+ *
+ * 6.1 If it has a matching CHID,CDID entry, the device has been
+ *     authorized before (paired) and nothing further needs to be
+ *     done.
+ *
+ * 6.2 If the CDID is zero (or the CM doesn't find a matching CDID in
+ *     its database), the device is assumed to be not known.  The CM
+ *     may associate the host with device by: writing a randomly
+ *     generated CDID to wusb_cdid and then a random CK to wusb_ck
+ *     (this uploads the new CC to the device).
+ *
+ *     CMD may choose to prompt the user before associating with a new
+ *     device.
+ *
+ * 7. Device is unplugged.
+ *
+ * When the device tries to connect wirelessly, it will present its
+ * CDID to the WUSB host controller.  The CM will query the
+ * database. If the CHID/CDID pair found, it will (with a 4-way
+ * handshake) challenge the device to demonstrate it has the CK secret
+ * key (from our database) without actually exchanging it. Once
+ * satisfied, crypto keys are derived from the CK, the device is
+ * connected and all communication is encrypted.
+ *
+ * References:
+ *   [WUSB-AM] Association Models Supplement to the Certified Wireless
+ *             Universal Serial Bus Specification, version 1.0.
+ */
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/version.h>
+#include <linux/usb.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/random.h>
+#include <linux/mutex.h>
+#include <linux/uwb.h>
+#include <linux/usb/wusb.h>
+#include <linux/usb/association.h>
+
+#define CBA_NAME_LEN 0x40 /* [WUSB-AM] table 4-7 */
+
+/* An instance of a Cable-Based-Association-Framework device */
+struct cbaf {
+	struct usb_device *usb_dev;
+	struct usb_interface *usb_iface;
+	void *buffer;
+	size_t buffer_size;
+
+	struct wusb_ckhdid chid;
+	char host_name[CBA_NAME_LEN];
+	u16 host_band_groups;
+
+	struct wusb_ckhdid cdid;
+	char device_name[CBA_NAME_LEN];
+	u16 device_band_groups;
+
+	struct wusb_ckhdid ck;
+};
+
+/*
+ * Verify that a CBAF USB-interface has what we need
+ *
+ * According to [WUSB-AM], CBA devices should provide at least two
+ * interfaces:
+ *  - RETRIEVE_HOST_INFO
+ *  - ASSOCIATE
+ *
+ * If the device doesn't provide these interfaces, we do not know how
+ * to deal with it.
+ */
+static int cbaf_check(struct cbaf *cbaf)
+{
+	int result;
+	struct device *dev = &cbaf->usb_iface->dev;
+	struct wusb_cbaf_assoc_info *assoc_info;
+	struct wusb_cbaf_assoc_request *assoc_request;
+	size_t assoc_size;
+	void *itr, *top;
+	int ar_rhi = 0, ar_assoc = 0;
+
+	result = usb_control_msg(
+		cbaf->usb_dev, usb_rcvctrlpipe(cbaf->usb_dev, 0),
+		CBAF_REQ_GET_ASSOCIATION_INFORMATION,
+		USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		0, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+		cbaf->buffer, cbaf->buffer_size, 1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "Cannot get available association types: %d\n",
+			result);
+		return result;
+	}
+
+	assoc_info = cbaf->buffer;
+	if (result < sizeof(*assoc_info)) {
+		dev_err(dev, "Not enough data to decode association info "
+			"header (%zu vs %zu bytes required)\n",
+			(size_t)result, sizeof(*assoc_info));
+		return result;
+	}
+
+	assoc_size = le16_to_cpu(assoc_info->Length);
+	if (result < assoc_size) {
+		dev_err(dev, "Not enough data to decode association info "
+			"(%zu vs %zu bytes required)\n",
+			(size_t)assoc_size, sizeof(*assoc_info));
+		return result;
+	}
+	/*
+	 * From now on, we just verify, but won't error out unless we
+	 * don't find the AR_TYPE_WUSB_{RETRIEVE_HOST_INFO,ASSOCIATE}
+	 * types.
+	 */
+	itr = cbaf->buffer + sizeof(*assoc_info);
+	top = cbaf->buffer + assoc_size;
+	dev_dbg(dev, "Found %u association requests (%zu bytes)\n",
+		 assoc_info->NumAssociationRequests, assoc_size);
+
+	while (itr < top) {
+		u16 ar_type, ar_subtype;
+		u32 ar_size;
+		const char *ar_name;
+
+		assoc_request = itr;
+
+		if (top - itr < sizeof(*assoc_request)) {
+			dev_err(dev, "Not enough data to decode associaton "
+				"request (%zu vs %zu bytes needed)\n",
+				top - itr, sizeof(*assoc_request));
+			break;
+		}
+
+		ar_type = le16_to_cpu(assoc_request->AssociationTypeId);
+		ar_subtype = le16_to_cpu(assoc_request->AssociationSubTypeId);
+		ar_size = le32_to_cpu(assoc_request->AssociationTypeInfoSize);
+		ar_name = "unknown";
+
+		switch (ar_type) {
+		case AR_TYPE_WUSB:
+			/* Verify we have what is mandated by [WUSB-AM]. */
+			switch (ar_subtype) {
+			case AR_TYPE_WUSB_RETRIEVE_HOST_INFO:
+				ar_name = "RETRIEVE_HOST_INFO";
+				ar_rhi = 1;
+				break;
+			case AR_TYPE_WUSB_ASSOCIATE:
+				/* send assoc data */
+				ar_name = "ASSOCIATE";
+				ar_assoc = 1;
+				break;
+			};
+			break;
+		};
+
+		dev_dbg(dev, "Association request #%02u: 0x%04x/%04x "
+			 "(%zu bytes): %s\n",
+			 assoc_request->AssociationDataIndex, ar_type,
+			 ar_subtype, (size_t)ar_size, ar_name);
+
+		itr += sizeof(*assoc_request);
+	}
+
+	if (!ar_rhi) {
+		dev_err(dev, "Missing RETRIEVE_HOST_INFO association "
+			"request\n");
+		return -EINVAL;
+	}
+	if (!ar_assoc) {
+		dev_err(dev, "Missing ASSOCIATE association request\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct wusb_cbaf_host_info cbaf_host_info_defaults = {
+	.AssociationTypeId_hdr    = WUSB_AR_AssociationTypeId,
+	.AssociationTypeId    	  = cpu_to_le16(AR_TYPE_WUSB),
+	.AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId,
+	.AssociationSubTypeId = cpu_to_le16(AR_TYPE_WUSB_RETRIEVE_HOST_INFO),
+	.CHID_hdr                 = WUSB_AR_CHID,
+	.LangID_hdr               = WUSB_AR_LangID,
+	.HostFriendlyName_hdr     = WUSB_AR_HostFriendlyName,
+};
+
+/* Send WUSB host information (CHID and name) to a CBAF device */
+static int cbaf_send_host_info(struct cbaf *cbaf)
+{
+	struct wusb_cbaf_host_info *hi;
+	size_t name_len;
+	size_t hi_size;
+
+	hi = cbaf->buffer;
+	memset(hi, 0, sizeof(*hi));
+	*hi = cbaf_host_info_defaults;
+	hi->CHID = cbaf->chid;
+	hi->LangID = 0;	/* FIXME: I guess... */
+	strlcpy(hi->HostFriendlyName, cbaf->host_name, CBA_NAME_LEN);
+	name_len = strlen(cbaf->host_name);
+	hi->HostFriendlyName_hdr.len = cpu_to_le16(name_len);
+	hi_size = sizeof(*hi) + name_len;
+
+	return usb_control_msg(cbaf->usb_dev, usb_sndctrlpipe(cbaf->usb_dev, 0),
+			CBAF_REQ_SET_ASSOCIATION_RESPONSE,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			0x0101,
+			cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+			hi, hi_size, 1000 /* FIXME: arbitrary */);
+}
+
+/*
+ * Get device's information (CDID) associated to CHID
+ *
+ * The device will return it's information (CDID, name, bandgroups)
+ * associated to the CHID we have set before, or 0 CDID and default
+ * name and bandgroup if no CHID set or unknown.
+ */
+static int cbaf_cdid_get(struct cbaf *cbaf)
+{
+	int result;
+	struct device *dev = &cbaf->usb_iface->dev;
+	struct wusb_cbaf_device_info *di;
+	size_t needed;
+
+	di = cbaf->buffer;
+	result = usb_control_msg(
+		cbaf->usb_dev, usb_rcvctrlpipe(cbaf->usb_dev, 0),
+		CBAF_REQ_GET_ASSOCIATION_REQUEST,
+		USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		0x0200, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+		di, cbaf->buffer_size, 1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "Cannot request device information: %d\n", result);
+		return result;
+	}
+
+	needed = result < sizeof(*di) ? sizeof(*di) : le32_to_cpu(di->Length);
+	if (result < needed) {
+		dev_err(dev, "Not enough data in DEVICE_INFO reply (%zu vs "
+			"%zu bytes needed)\n", (size_t)result, needed);
+		return result;
+	}
+
+	strlcpy(cbaf->device_name, di->DeviceFriendlyName, CBA_NAME_LEN);
+	cbaf->cdid = di->CDID;
+	cbaf->device_band_groups = le16_to_cpu(di->BandGroups);
+
+	return 0;
+}
+
+static ssize_t cbaf_wusb_chid_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+	char pr_chid[WUSB_CKHDID_STRSIZE];
+
+	ckhdid_printf(pr_chid, sizeof(pr_chid), &cbaf->chid);
+	return scnprintf(buf, PAGE_SIZE, "%s\n", pr_chid);
+}
+
+static ssize_t cbaf_wusb_chid_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t size)
+{
+	ssize_t result;
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+
+	result = sscanf(buf,
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx",
+			&cbaf->chid.data[0] , &cbaf->chid.data[1],
+			&cbaf->chid.data[2] , &cbaf->chid.data[3],
+			&cbaf->chid.data[4] , &cbaf->chid.data[5],
+			&cbaf->chid.data[6] , &cbaf->chid.data[7],
+			&cbaf->chid.data[8] , &cbaf->chid.data[9],
+			&cbaf->chid.data[10], &cbaf->chid.data[11],
+			&cbaf->chid.data[12], &cbaf->chid.data[13],
+			&cbaf->chid.data[14], &cbaf->chid.data[15]);
+
+	if (result != 16)
+		return -EINVAL;
+
+	result = cbaf_send_host_info(cbaf);
+	if (result < 0)
+		return result;
+	result = cbaf_cdid_get(cbaf);
+	if (result < 0)
+		return -result;
+	return size;
+}
+static DEVICE_ATTR(wusb_chid, 0600, cbaf_wusb_chid_show, cbaf_wusb_chid_store);
+
+static ssize_t cbaf_wusb_host_name_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n", cbaf->host_name);
+}
+
+static ssize_t cbaf_wusb_host_name_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t size)
+{
+	ssize_t result;
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+
+	result = sscanf(buf, "%63s", cbaf->host_name);
+	if (result != 1)
+		return -EINVAL;
+
+	return size;
+}
+static DEVICE_ATTR(wusb_host_name, 0600, cbaf_wusb_host_name_show,
+					 cbaf_wusb_host_name_store);
+
+static ssize_t cbaf_wusb_host_band_groups_show(struct device *dev,
+					       struct device_attribute *attr,
+					       char *buf)
+{
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+
+	return scnprintf(buf, PAGE_SIZE, "0x%04x\n", cbaf->host_band_groups);
+}
+
+static ssize_t cbaf_wusb_host_band_groups_store(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf, size_t size)
+{
+	ssize_t result;
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+	u16 band_groups = 0;
+
+	result = sscanf(buf, "%04hx", &band_groups);
+	if (result != 1)
+		return -EINVAL;
+
+	cbaf->host_band_groups = band_groups;
+
+	return size;
+}
+
+static DEVICE_ATTR(wusb_host_band_groups, 0600,
+		   cbaf_wusb_host_band_groups_show,
+		   cbaf_wusb_host_band_groups_store);
+
+static const struct wusb_cbaf_device_info cbaf_device_info_defaults = {
+	.Length_hdr               = WUSB_AR_Length,
+	.CDID_hdr                 = WUSB_AR_CDID,
+	.BandGroups_hdr           = WUSB_AR_BandGroups,
+	.LangID_hdr               = WUSB_AR_LangID,
+	.DeviceFriendlyName_hdr   = WUSB_AR_DeviceFriendlyName,
+};
+
+static ssize_t cbaf_wusb_cdid_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+	char pr_cdid[WUSB_CKHDID_STRSIZE];
+
+	ckhdid_printf(pr_cdid, sizeof(pr_cdid), &cbaf->cdid);
+	return scnprintf(buf, PAGE_SIZE, "%s\n", pr_cdid);
+}
+
+static ssize_t cbaf_wusb_cdid_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t size)
+{
+	ssize_t result;
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+	struct wusb_ckhdid cdid;
+
+	result = sscanf(buf,
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx",
+			&cdid.data[0] , &cdid.data[1],
+			&cdid.data[2] , &cdid.data[3],
+			&cdid.data[4] , &cdid.data[5],
+			&cdid.data[6] , &cdid.data[7],
+			&cdid.data[8] , &cdid.data[9],
+			&cdid.data[10], &cdid.data[11],
+			&cdid.data[12], &cdid.data[13],
+			&cdid.data[14], &cdid.data[15]);
+	if (result != 16)
+		return -EINVAL;
+
+	cbaf->cdid = cdid;
+
+	return size;
+}
+static DEVICE_ATTR(wusb_cdid, 0600, cbaf_wusb_cdid_show, cbaf_wusb_cdid_store);
+
+static ssize_t cbaf_wusb_device_band_groups_show(struct device *dev,
+						 struct device_attribute *attr,
+						 char *buf)
+{
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+
+	return scnprintf(buf, PAGE_SIZE, "0x%04x\n", cbaf->device_band_groups);
+}
+
+static DEVICE_ATTR(wusb_device_band_groups, 0600,
+		   cbaf_wusb_device_band_groups_show,
+		   NULL);
+
+static ssize_t cbaf_wusb_device_name_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n", cbaf->device_name);
+}
+static DEVICE_ATTR(wusb_device_name, 0600, cbaf_wusb_device_name_show, NULL);
+
+static const struct wusb_cbaf_cc_data cbaf_cc_data_defaults = {
+	.AssociationTypeId_hdr    = WUSB_AR_AssociationTypeId,
+	.AssociationTypeId    	  = cpu_to_le16(AR_TYPE_WUSB),
+	.AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId,
+	.AssociationSubTypeId     = cpu_to_le16(AR_TYPE_WUSB_ASSOCIATE),
+	.Length_hdr               = WUSB_AR_Length,
+	.Length               	  = cpu_to_le32(sizeof(struct wusb_cbaf_cc_data)),
+	.ConnectionContext_hdr    = WUSB_AR_ConnectionContext,
+	.BandGroups_hdr           = WUSB_AR_BandGroups,
+};
+
+static const struct wusb_cbaf_cc_data_fail cbaf_cc_data_fail_defaults = {
+	.AssociationTypeId_hdr    = WUSB_AR_AssociationTypeId,
+	.AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId,
+	.Length_hdr               = WUSB_AR_Length,
+	.AssociationStatus_hdr    = WUSB_AR_AssociationStatus,
+};
+
+/*
+ * Send a new CC to the device.
+ */
+static int cbaf_cc_upload(struct cbaf *cbaf)
+{
+	int result;
+	struct device *dev = &cbaf->usb_iface->dev;
+	struct wusb_cbaf_cc_data *ccd;
+	char pr_cdid[WUSB_CKHDID_STRSIZE];
+
+	ccd =  cbaf->buffer;
+	*ccd = cbaf_cc_data_defaults;
+	ccd->CHID = cbaf->chid;
+	ccd->CDID = cbaf->cdid;
+	ccd->CK = cbaf->ck;
+	ccd->BandGroups = cpu_to_le16(cbaf->host_band_groups);
+
+	dev_dbg(dev, "Trying to upload CC:\n");
+	ckhdid_printf(pr_cdid, sizeof(pr_cdid), &ccd->CHID);
+	dev_dbg(dev, "  CHID       %s\n", pr_cdid);
+	ckhdid_printf(pr_cdid, sizeof(pr_cdid), &ccd->CDID);
+	dev_dbg(dev, "  CDID       %s\n", pr_cdid);
+	dev_dbg(dev, "  Bandgroups 0x%04x\n", cbaf->host_band_groups);
+
+	result = usb_control_msg(
+		cbaf->usb_dev, usb_sndctrlpipe(cbaf->usb_dev, 0),
+		CBAF_REQ_SET_ASSOCIATION_RESPONSE,
+		USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		0x0201, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+		ccd, sizeof(*ccd), 1000 /* FIXME: arbitrary */);
+
+	return result;
+}
+
+static ssize_t cbaf_wusb_ck_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t size)
+{
+	ssize_t result;
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+
+	result = sscanf(buf,
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx",
+			&cbaf->ck.data[0] , &cbaf->ck.data[1],
+			&cbaf->ck.data[2] , &cbaf->ck.data[3],
+			&cbaf->ck.data[4] , &cbaf->ck.data[5],
+			&cbaf->ck.data[6] , &cbaf->ck.data[7],
+			&cbaf->ck.data[8] , &cbaf->ck.data[9],
+			&cbaf->ck.data[10], &cbaf->ck.data[11],
+			&cbaf->ck.data[12], &cbaf->ck.data[13],
+			&cbaf->ck.data[14], &cbaf->ck.data[15]);
+	if (result != 16)
+		return -EINVAL;
+
+	result = cbaf_cc_upload(cbaf);
+	if (result < 0)
+		return result;
+
+	return size;
+}
+static DEVICE_ATTR(wusb_ck, 0600, NULL, cbaf_wusb_ck_store);
+
+static struct attribute *cbaf_dev_attrs[] = {
+	&dev_attr_wusb_host_name.attr,
+	&dev_attr_wusb_host_band_groups.attr,
+	&dev_attr_wusb_chid.attr,
+	&dev_attr_wusb_cdid.attr,
+	&dev_attr_wusb_device_name.attr,
+	&dev_attr_wusb_device_band_groups.attr,
+	&dev_attr_wusb_ck.attr,
+	NULL,
+};
+
+static struct attribute_group cbaf_dev_attr_group = {
+	.name = NULL,	/* we want them in the same directory */
+	.attrs = cbaf_dev_attrs,
+};
+
+static int cbaf_probe(struct usb_interface *iface,
+		      const struct usb_device_id *id)
+{
+	struct cbaf *cbaf;
+	struct device *dev = &iface->dev;
+	int result = -ENOMEM;
+
+	cbaf = kzalloc(sizeof(*cbaf), GFP_KERNEL);
+	if (cbaf == NULL)
+		goto error_kzalloc;
+	cbaf->buffer = kmalloc(512, GFP_KERNEL);
+	if (cbaf->buffer == NULL)
+		goto error_kmalloc_buffer;
+
+	cbaf->buffer_size = 512;
+	cbaf->usb_dev = usb_get_dev(interface_to_usbdev(iface));
+	cbaf->usb_iface = usb_get_intf(iface);
+	result = cbaf_check(cbaf);
+	if (result < 0) {
+		dev_err(dev, "This device is not WUSB-CBAF compliant"
+			"and is not supported yet.\n");
+		goto error_check;
+	}
+
+	result = sysfs_create_group(&dev->kobj, &cbaf_dev_attr_group);
+	if (result < 0) {
+		dev_err(dev, "Can't register sysfs attr group: %d\n", result);
+		goto error_create_group;
+	}
+	usb_set_intfdata(iface, cbaf);
+	return 0;
+
+error_create_group:
+error_check:
+	kfree(cbaf->buffer);
+error_kmalloc_buffer:
+	kfree(cbaf);
+error_kzalloc:
+	return result;
+}
+
+static void cbaf_disconnect(struct usb_interface *iface)
+{
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+	struct device *dev = &iface->dev;
+	sysfs_remove_group(&dev->kobj, &cbaf_dev_attr_group);
+	usb_set_intfdata(iface, NULL);
+	usb_put_intf(iface);
+	kfree(cbaf->buffer);
+	/* paranoia: clean up crypto keys */
+	memset(cbaf, 0, sizeof(*cbaf));
+	kfree(cbaf);
+}
+
+static struct usb_device_id cbaf_id_table[] = {
+	{ USB_INTERFACE_INFO(0xef, 0x03, 0x01), },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, cbaf_id_table);
+
+static struct usb_driver cbaf_driver = {
+	.name =		"wusb-cbaf",
+	.id_table =	cbaf_id_table,
+	.probe =	cbaf_probe,
+	.disconnect =	cbaf_disconnect,
+};
+
+static int __init cbaf_driver_init(void)
+{
+	return usb_register(&cbaf_driver);
+}
+module_init(cbaf_driver_init);
+
+static void __exit cbaf_driver_exit(void)
+{
+	usb_deregister(&cbaf_driver);
+}
+module_exit(cbaf_driver_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Wireless USB Cable Based Association");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c
new file mode 100644
index 0000000..c36c438
--- /dev/null
+++ b/drivers/usb/wusbcore/crypto.c
@@ -0,0 +1,538 @@
+/*
+ * Ultra Wide Band
+ * AES-128 CCM Encryption
+ *
+ * Copyright (C) 2007 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * We don't do any encryption here; we use the Linux Kernel's AES-128
+ * crypto modules to construct keys and payload blocks in a way
+ * defined by WUSB1.0[6]. Check the erratas, as typos are are patched
+ * there.
+ *
+ * Thanks a zillion to John Keys for his help and clarifications over
+ * the designed-by-a-committee text.
+ *
+ * So the idea is that there is this basic Pseudo-Random-Function
+ * defined in WUSB1.0[6.5] which is the core of everything. It works
+ * by tweaking some blocks, AES crypting them and then xoring
+ * something else with them (this seems to be called CBC(AES) -- can
+ * you tell I know jack about crypto?). So we just funnel it into the
+ * Linux Crypto API.
+ *
+ * We leave a crypto test module so we can verify that vectors match,
+ * every now and then.
+ *
+ * Block size: 16 bytes -- AES seems to do things in 'block sizes'. I
+ *             am learning a lot...
+ *
+ *             Conveniently, some data structures that need to be
+ *             funneled through AES are...16 bytes in size!
+ */
+
+#include <linux/crypto.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/uwb.h>
+#include <linux/usb/wusb.h>
+#include <linux/scatterlist.h>
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+
+/*
+ * Block of data, as understood by AES-CCM
+ *
+ * The code assumes this structure is nothing but a 16 byte array
+ * (packed in a struct to avoid common mess ups that I usually do with
+ * arrays and enforcing type checking).
+ */
+struct aes_ccm_block {
+	u8 data[16];
+} __attribute__((packed));
+
+/*
+ * Counter-mode Blocks (WUSB1.0[6.4])
+ *
+ * According to CCM (or so it seems), for the purpose of calculating
+ * the MIC, the message is broken in N counter-mode blocks, B0, B1,
+ * ... BN.
+ *
+ * B0 contains flags, the CCM nonce and l(m).
+ *
+ * B1 contains l(a), the MAC header, the encryption offset and padding.
+ *
+ * If EO is nonzero, additional blocks are built from payload bytes
+ * until EO is exahusted (FIXME: padding to 16 bytes, I guess). The
+ * padding is not xmitted.
+ */
+
+/* WUSB1.0[T6.4] */
+struct aes_ccm_b0 {
+	u8 flags;	/* 0x59, per CCM spec */
+	struct aes_ccm_nonce ccm_nonce;
+	__be16 lm;
+} __attribute__((packed));
+
+/* WUSB1.0[T6.5] */
+struct aes_ccm_b1 {
+	__be16 la;
+	u8 mac_header[10];
+	__le16 eo;
+	u8 security_reserved;	/* This is always zero */
+	u8 padding;		/* 0 */
+} __attribute__((packed));
+
+/*
+ * Encryption Blocks (WUSB1.0[6.4.4])
+ *
+ * CCM uses Ax blocks to generate a keystream with which the MIC and
+ * the message's payload are encoded. A0 always encrypts/decrypts the
+ * MIC. Ax (x>0) are used for the sucesive payload blocks.
+ *
+ * The x is the counter, and is increased for each block.
+ */
+struct aes_ccm_a {
+	u8 flags;	/* 0x01, per CCM spec */
+	struct aes_ccm_nonce ccm_nonce;
+	__be16 counter;	/* Value of x */
+} __attribute__((packed));
+
+static void bytewise_xor(void *_bo, const void *_bi1, const void *_bi2,
+			 size_t size)
+{
+	u8 *bo = _bo;
+	const u8 *bi1 = _bi1, *bi2 = _bi2;
+	size_t itr;
+	for (itr = 0; itr < size; itr++)
+		bo[itr] = bi1[itr] ^ bi2[itr];
+}
+
+/*
+ * CC-MAC function WUSB1.0[6.5]
+ *
+ * Take a data string and produce the encrypted CBC Counter-mode MIC
+ *
+ * Note the names for most function arguments are made to (more or
+ * less) match those used in the pseudo-function definition given in
+ * WUSB1.0[6.5].
+ *
+ * @tfm_cbc: CBC(AES) blkcipher handle (initialized)
+ *
+ * @tfm_aes: AES cipher handle (initialized)
+ *
+ * @mic: buffer for placing the computed MIC (Message Integrity
+ *       Code). This is exactly 8 bytes, and we expect the buffer to
+ *       be at least eight bytes in length.
+ *
+ * @key: 128 bit symmetric key
+ *
+ * @n: CCM nonce
+ *
+ * @a: ASCII string, 14 bytes long (I guess zero padded if needed;
+ *     we use exactly 14 bytes).
+ *
+ * @b: data stream to be processed; cannot be a global or const local
+ *     (will confuse the scatterlists)
+ *
+ * @blen: size of b...
+ *
+ * Still not very clear how this is done, but looks like this: we
+ * create block B0 (as WUSB1.0[6.5] says), then we AES-crypt it with
+ * @key. We bytewise xor B0 with B1 (1) and AES-crypt that. Then we
+ * take the payload and divide it in blocks (16 bytes), xor them with
+ * the previous crypto result (16 bytes) and crypt it, repeat the next
+ * block with the output of the previous one, rinse wash (I guess this
+ * is what AES CBC mode means...but I truly have no idea). So we use
+ * the CBC(AES) blkcipher, that does precisely that. The IV (Initial
+ * Vector) is 16 bytes and is set to zero, so
+ *
+ * See rfc3610. Linux crypto has a CBC implementation, but the
+ * documentation is scarce, to say the least, and the example code is
+ * so intricated that is difficult to understand how things work. Most
+ * of this is guess work -- bite me.
+ *
+ * (1) Created as 6.5 says, again, using as l(a) 'Blen + 14', and
+ *     using the 14 bytes of @a to fill up
+ *     b1.{mac_header,e0,security_reserved,padding}.
+ *
+ * NOTE: The definiton of l(a) in WUSB1.0[6.5] vs the definition of
+ *       l(m) is orthogonal, they bear no relationship, so it is not
+ *       in conflict with the parameter's relation that
+ *       WUSB1.0[6.4.2]) defines.
+ *
+ * NOTE: WUSB1.0[A.1]: Host Nonce is missing a nibble? (1e); fixed in
+ *       first errata released on 2005/07.
+ *
+ * NOTE: we need to clean IV to zero at each invocation to make sure
+ *       we start with a fresh empty Initial Vector, so that the CBC
+ *       works ok.
+ *
+ * NOTE: blen is not aligned to a block size, we'll pad zeros, that's
+ *       what sg[4] is for. Maybe there is a smarter way to do this.
+ */
+static int wusb_ccm_mac(struct crypto_blkcipher *tfm_cbc,
+			struct crypto_cipher *tfm_aes, void *mic,
+			const struct aes_ccm_nonce *n,
+			const struct aes_ccm_label *a, const void *b,
+			size_t blen)
+{
+	int result = 0;
+	struct blkcipher_desc desc;
+	struct aes_ccm_b0 b0;
+	struct aes_ccm_b1 b1;
+	struct aes_ccm_a ax;
+	struct scatterlist sg[4], sg_dst;
+	void *iv, *dst_buf;
+	size_t ivsize, dst_size;
+	const u8 bzero[16] = { 0 };
+	size_t zero_padding;
+
+	d_fnstart(3, NULL, "(tfm_cbc %p, tfm_aes %p, mic %p, "
+		  "n %p, a %p, b %p, blen %zu)\n",
+		  tfm_cbc, tfm_aes, mic, n, a, b, blen);
+	/*
+	 * These checks should be compile time optimized out
+	 * ensure @a fills b1's mac_header and following fields
+	 */
+	WARN_ON(sizeof(*a) != sizeof(b1) - sizeof(b1.la));
+	WARN_ON(sizeof(b0) != sizeof(struct aes_ccm_block));
+	WARN_ON(sizeof(b1) != sizeof(struct aes_ccm_block));
+	WARN_ON(sizeof(ax) != sizeof(struct aes_ccm_block));
+
+	result = -ENOMEM;
+	zero_padding = sizeof(struct aes_ccm_block)
+		- blen % sizeof(struct aes_ccm_block);
+	zero_padding = blen % sizeof(struct aes_ccm_block);
+	if (zero_padding)
+		zero_padding = sizeof(struct aes_ccm_block) - zero_padding;
+	dst_size = blen + sizeof(b0) + sizeof(b1) + zero_padding;
+	dst_buf = kzalloc(dst_size, GFP_KERNEL);
+	if (dst_buf == NULL) {
+		printk(KERN_ERR "E: can't alloc destination buffer\n");
+		goto error_dst_buf;
+	}
+
+	iv = crypto_blkcipher_crt(tfm_cbc)->iv;
+	ivsize = crypto_blkcipher_ivsize(tfm_cbc);
+	memset(iv, 0, ivsize);
+
+	/* Setup B0 */
+	b0.flags = 0x59;	/* Format B0 */
+	b0.ccm_nonce = *n;
+	b0.lm = cpu_to_be16(0);	/* WUSB1.0[6.5] sez l(m) is 0 */
+
+	/* Setup B1
+	 *
+	 * The WUSB spec is anything but clear! WUSB1.0[6.5]
+	 * says that to initialize B1 from A with 'l(a) = blen +
+	 * 14'--after clarification, it means to use A's contents
+	 * for MAC Header, EO, sec reserved and padding.
+	 */
+	b1.la = cpu_to_be16(blen + 14);
+	memcpy(&b1.mac_header, a, sizeof(*a));
+
+	d_printf(4, NULL, "I: B0 (%zu bytes)\n", sizeof(b0));
+	d_dump(4, NULL, &b0, sizeof(b0));
+	d_printf(4, NULL, "I: B1 (%zu bytes)\n", sizeof(b1));
+	d_dump(4, NULL, &b1, sizeof(b1));
+	d_printf(4, NULL, "I: B (%zu bytes)\n", blen);
+	d_dump(4, NULL, b, blen);
+	d_printf(4, NULL, "I: B 0-padding (%zu bytes)\n", zero_padding);
+	d_printf(4, NULL, "D: IV before crypto (%zu)\n", ivsize);
+	d_dump(4, NULL, iv, ivsize);
+
+	sg_init_table(sg, ARRAY_SIZE(sg));
+	sg_set_buf(&sg[0], &b0, sizeof(b0));
+	sg_set_buf(&sg[1], &b1, sizeof(b1));
+	sg_set_buf(&sg[2], b, blen);
+	/* 0 if well behaved :) */
+	sg_set_buf(&sg[3], bzero, zero_padding);
+	sg_init_one(&sg_dst, dst_buf, dst_size);
+
+	desc.tfm = tfm_cbc;
+	desc.flags = 0;
+	result = crypto_blkcipher_encrypt(&desc, &sg_dst, sg, dst_size);
+	if (result < 0) {
+		printk(KERN_ERR "E: can't compute CBC-MAC tag (MIC): %d\n",
+		       result);
+		goto error_cbc_crypt;
+	}
+	d_printf(4, NULL, "D: MIC tag\n");
+	d_dump(4, NULL, iv, ivsize);
+
+	/* Now we crypt the MIC Tag (*iv) with Ax -- values per WUSB1.0[6.5]
+	 * The procedure is to AES crypt the A0 block and XOR the MIC
+	 * Tag agains it; we only do the first 8 bytes and place it
+	 * directly in the destination buffer.
+	 *
+	 * POS Crypto API: size is assumed to be AES's block size.
+	 * Thanks for documenting it -- tip taken from airo.c
+	 */
+	ax.flags = 0x01;		/* as per WUSB 1.0 spec */
+	ax.ccm_nonce = *n;
+	ax.counter = 0;
+	crypto_cipher_encrypt_one(tfm_aes, (void *)&ax, (void *)&ax);
+	bytewise_xor(mic, &ax, iv, 8);
+	d_printf(4, NULL, "D: CTR[MIC]\n");
+	d_dump(4, NULL, &ax, 8);
+	d_printf(4, NULL, "D: CCM-MIC tag\n");
+	d_dump(4, NULL, mic, 8);
+	result = 8;
+error_cbc_crypt:
+	kfree(dst_buf);
+error_dst_buf:
+	d_fnend(3, NULL, "(tfm_cbc %p, tfm_aes %p, mic %p, "
+		"n %p, a %p, b %p, blen %zu)\n",
+		tfm_cbc, tfm_aes, mic, n, a, b, blen);
+	return result;
+}
+
+/*
+ * WUSB Pseudo Random Function (WUSB1.0[6.5])
+ *
+ * @b: buffer to the source data; cannot be a global or const local
+ *     (will confuse the scatterlists)
+ */
+ssize_t wusb_prf(void *out, size_t out_size,
+		 const u8 key[16], const struct aes_ccm_nonce *_n,
+		 const struct aes_ccm_label *a,
+		 const void *b, size_t blen, size_t len)
+{
+	ssize_t result, bytes = 0, bitr;
+	struct aes_ccm_nonce n = *_n;
+	struct crypto_blkcipher *tfm_cbc;
+	struct crypto_cipher *tfm_aes;
+	u64 sfn = 0;
+	__le64 sfn_le;
+
+	d_fnstart(3, NULL, "(out %p, out_size %zu, key %p, _n %p, "
+		  "a %p, b %p, blen %zu, len %zu)\n", out, out_size,
+		  key, _n, a, b, blen, len);
+
+	tfm_cbc = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
+	if (IS_ERR(tfm_cbc)) {
+		result = PTR_ERR(tfm_cbc);
+		printk(KERN_ERR "E: can't load CBC(AES): %d\n", (int)result);
+		goto error_alloc_cbc;
+	}
+	result = crypto_blkcipher_setkey(tfm_cbc, key, 16);
+	if (result < 0) {
+		printk(KERN_ERR "E: can't set CBC key: %d\n", (int)result);
+		goto error_setkey_cbc;
+	}
+
+	tfm_aes = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
+	if (IS_ERR(tfm_aes)) {
+		result = PTR_ERR(tfm_aes);
+		printk(KERN_ERR "E: can't load AES: %d\n", (int)result);
+		goto error_alloc_aes;
+	}
+	result = crypto_cipher_setkey(tfm_aes, key, 16);
+	if (result < 0) {
+		printk(KERN_ERR "E: can't set AES key: %d\n", (int)result);
+		goto error_setkey_aes;
+	}
+
+	for (bitr = 0; bitr < (len + 63) / 64; bitr++) {
+		sfn_le = cpu_to_le64(sfn++);
+		memcpy(&n.sfn, &sfn_le, sizeof(n.sfn));	/* n.sfn++... */
+		result = wusb_ccm_mac(tfm_cbc, tfm_aes, out + bytes,
+				      &n, a, b, blen);
+		if (result < 0)
+			goto error_ccm_mac;
+		bytes += result;
+	}
+	result = bytes;
+error_ccm_mac:
+error_setkey_aes:
+	crypto_free_cipher(tfm_aes);
+error_alloc_aes:
+error_setkey_cbc:
+	crypto_free_blkcipher(tfm_cbc);
+error_alloc_cbc:
+	d_fnend(3, NULL, "(out %p, out_size %zu, key %p, _n %p, "
+		"a %p, b %p, blen %zu, len %zu) = %d\n", out, out_size,
+		key, _n, a, b, blen, len, (int)bytes);
+	return result;
+}
+
+/* WUSB1.0[A.2] test vectors */
+static const u8 stv_hsmic_key[16] = {
+	0x4b, 0x79, 0xa3, 0xcf, 0xe5, 0x53, 0x23, 0x9d,
+	0xd7, 0xc1, 0x6d, 0x1c, 0x2d, 0xab, 0x6d, 0x3f
+};
+
+static const struct aes_ccm_nonce stv_hsmic_n = {
+	.sfn = { 0 },
+	.tkid = { 0x76, 0x98, 0x01,  },
+	.dest_addr = { .data = { 0xbe, 0x00 } },
+		.src_addr = { .data = { 0x76, 0x98 } },
+};
+
+/*
+ * Out-of-band MIC Generation verification code
+ *
+ */
+static int wusb_oob_mic_verify(void)
+{
+	int result;
+	u8 mic[8];
+	/* WUSB1.0[A.2] test vectors
+	 *
+	 * Need to keep it in the local stack as GCC 4.1.3something
+	 * messes up and generates noise.
+	 */
+	struct usb_handshake stv_hsmic_hs = {
+		.bMessageNumber = 2,
+		.bStatus 	= 00,
+		.tTKID 		= { 0x76, 0x98, 0x01 },
+		.bReserved 	= 00,
+		.CDID 		= { 0x30, 0x31, 0x32, 0x33, 0x34, 0x35,
+				    0x36, 0x37, 0x38, 0x39, 0x3a, 0x3b,
+				    0x3c, 0x3d, 0x3e, 0x3f },
+		.nonce	 	= { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25,
+				    0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b,
+				    0x2c, 0x2d, 0x2e, 0x2f },
+		.MIC	 	= { 0x75, 0x6a, 0x97, 0x51, 0x0c, 0x8c,
+				    0x14, 0x7b } ,
+	};
+	size_t hs_size;
+
+	result = wusb_oob_mic(mic, stv_hsmic_key, &stv_hsmic_n, &stv_hsmic_hs);
+	if (result < 0)
+		printk(KERN_ERR "E: WUSB OOB MIC test: failed: %d\n", result);
+	else if (memcmp(stv_hsmic_hs.MIC, mic, sizeof(mic))) {
+		printk(KERN_ERR "E: OOB MIC test: "
+		       "mismatch between MIC result and WUSB1.0[A2]\n");
+		hs_size = sizeof(stv_hsmic_hs) - sizeof(stv_hsmic_hs.MIC);
+		printk(KERN_ERR "E: Handshake2 in: (%zu bytes)\n", hs_size);
+		dump_bytes(NULL, &stv_hsmic_hs, hs_size);
+		printk(KERN_ERR "E: CCM Nonce in: (%zu bytes)\n",
+		       sizeof(stv_hsmic_n));
+		dump_bytes(NULL, &stv_hsmic_n, sizeof(stv_hsmic_n));
+		printk(KERN_ERR "E: MIC out:\n");
+		dump_bytes(NULL, mic, sizeof(mic));
+		printk(KERN_ERR "E: MIC out (from WUSB1.0[A.2]):\n");
+		dump_bytes(NULL, stv_hsmic_hs.MIC, sizeof(stv_hsmic_hs.MIC));
+		result = -EINVAL;
+	} else
+		result = 0;
+	return result;
+}
+
+/*
+ * Test vectors for Key derivation
+ *
+ * These come from WUSB1.0[6.5.1], the vectors in WUSB1.0[A.1]
+ * (errata corrected in 2005/07).
+ */
+static const u8 stv_key_a1[16] __attribute__ ((__aligned__(4))) = {
+	0xf0, 0xe1, 0xd2, 0xc3, 0xb4, 0xa5, 0x96, 0x87,
+	0x78, 0x69, 0x5a, 0x4b, 0x3c, 0x2d, 0x1e, 0x0f
+};
+
+static const struct aes_ccm_nonce stv_keydvt_n_a1 = {
+	.sfn = { 0 },
+	.tkid = { 0x76, 0x98, 0x01,  },
+	.dest_addr = { .data = { 0xbe, 0x00 } },
+	.src_addr = { .data = { 0x76, 0x98 } },
+};
+
+static const struct wusb_keydvt_out stv_keydvt_out_a1 = {
+	.kck = {
+		0x4b, 0x79, 0xa3, 0xcf, 0xe5, 0x53, 0x23, 0x9d,
+		0xd7, 0xc1, 0x6d, 0x1c, 0x2d, 0xab, 0x6d, 0x3f
+	},
+	.ptk = {
+		0xc8, 0x70, 0x62, 0x82, 0xb6, 0x7c, 0xe9, 0x06,
+		0x7b, 0xc5, 0x25, 0x69, 0xf2, 0x36, 0x61, 0x2d
+	}
+};
+
+/*
+ * Performa a test to make sure we match the vectors defined in
+ * WUSB1.0[A.1](Errata2006/12)
+ */
+static int wusb_key_derive_verify(void)
+{
+	int result = 0;
+	struct wusb_keydvt_out keydvt_out;
+	/* These come from WUSB1.0[A.1] + 2006/12 errata
+	 * NOTE: can't make this const or global -- somehow it seems
+	 *       the scatterlists for crypto get confused and we get
+	 *       bad data. There is no doc on this... */
+	struct wusb_keydvt_in stv_keydvt_in_a1 = {
+		.hnonce = {
+			0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+			0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f
+		},
+		.dnonce = {
+			0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
+			0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f
+		}
+	};
+
+	result = wusb_key_derive(&keydvt_out, stv_key_a1, &stv_keydvt_n_a1,
+				 &stv_keydvt_in_a1);
+	if (result < 0)
+		printk(KERN_ERR "E: WUSB key derivation test: "
+		       "derivation failed: %d\n", result);
+	if (memcmp(&stv_keydvt_out_a1, &keydvt_out, sizeof(keydvt_out))) {
+		printk(KERN_ERR "E: WUSB key derivation test: "
+		       "mismatch between key derivation result "
+		       "and WUSB1.0[A1] Errata 2006/12\n");
+		printk(KERN_ERR "E: keydvt in: key (%zu bytes)\n",
+		       sizeof(stv_key_a1));
+		dump_bytes(NULL, stv_key_a1, sizeof(stv_key_a1));
+		printk(KERN_ERR "E: keydvt in: nonce (%zu bytes)\n",
+		       sizeof(stv_keydvt_n_a1));
+		dump_bytes(NULL, &stv_keydvt_n_a1, sizeof(stv_keydvt_n_a1));
+		printk(KERN_ERR "E: keydvt in: hnonce & dnonce (%zu bytes)\n",
+		       sizeof(stv_keydvt_in_a1));
+		dump_bytes(NULL, &stv_keydvt_in_a1, sizeof(stv_keydvt_in_a1));
+		printk(KERN_ERR "E: keydvt out: KCK\n");
+		dump_bytes(NULL, &keydvt_out.kck, sizeof(keydvt_out.kck));
+		printk(KERN_ERR "E: keydvt out: PTK\n");
+		dump_bytes(NULL, &keydvt_out.ptk, sizeof(keydvt_out.ptk));
+		result = -EINVAL;
+	} else
+		result = 0;
+	return result;
+}
+
+/*
+ * Initialize crypto system
+ *
+ * FIXME: we do nothing now, other than verifying. Later on we'll
+ * cache the encryption stuff, so that's why we have a separate init.
+ */
+int wusb_crypto_init(void)
+{
+	int result;
+
+	result = wusb_key_derive_verify();
+	if (result < 0)
+		return result;
+	return wusb_oob_mic_verify();
+}
+
+void wusb_crypto_exit(void)
+{
+	/* FIXME: free cached crypto transforms */
+}
diff --git a/drivers/usb/wusbcore/dev-sysfs.c b/drivers/usb/wusbcore/dev-sysfs.c
new file mode 100644
index 0000000..7897a19
--- /dev/null
+++ b/drivers/usb/wusbcore/dev-sysfs.c
@@ -0,0 +1,143 @@
+/*
+ * WUSB devices
+ * sysfs bindings
+ *
+ * Copyright (C) 2007 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Get them out of the way...
+ */
+
+#include <linux/jiffies.h>
+#include <linux/ctype.h>
+#include <linux/workqueue.h>
+#include "wusbhc.h"
+
+#undef D_LOCAL
+#define D_LOCAL 4
+#include <linux/uwb/debug.h>
+
+static ssize_t wusb_disconnect_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t size)
+{
+	struct usb_device *usb_dev;
+	struct wusbhc *wusbhc;
+	unsigned command;
+	u8 port_idx;
+
+	if (sscanf(buf, "%u", &command) != 1)
+		return -EINVAL;
+	if (command == 0)
+		return size;
+	usb_dev = to_usb_device(dev);
+	wusbhc = wusbhc_get_by_usb_dev(usb_dev);
+	if (wusbhc == NULL)
+		return -ENODEV;
+
+	mutex_lock(&wusbhc->mutex);
+	port_idx = wusb_port_no_to_idx(usb_dev->portnum);
+	__wusbhc_dev_disable(wusbhc, port_idx);
+	mutex_unlock(&wusbhc->mutex);
+	wusbhc_put(wusbhc);
+	return size;
+}
+static DEVICE_ATTR(wusb_disconnect, 0200, NULL, wusb_disconnect_store);
+
+static ssize_t wusb_cdid_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	ssize_t result;
+	struct wusb_dev *wusb_dev;
+
+	wusb_dev = wusb_dev_get_by_usb_dev(to_usb_device(dev));
+	if (wusb_dev == NULL)
+		return -ENODEV;
+	result = ckhdid_printf(buf, PAGE_SIZE, &wusb_dev->cdid);
+	strcat(buf, "\n");
+	wusb_dev_put(wusb_dev);
+	return result + 1;
+}
+static DEVICE_ATTR(wusb_cdid, 0444, wusb_cdid_show, NULL);
+
+static ssize_t wusb_ck_store(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t size)
+{
+	int result;
+	struct usb_device *usb_dev;
+	struct wusbhc *wusbhc;
+	struct wusb_ckhdid ck;
+
+	result = sscanf(buf,
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx\n",
+			&ck.data[0] , &ck.data[1],
+			&ck.data[2] , &ck.data[3],
+			&ck.data[4] , &ck.data[5],
+			&ck.data[6] , &ck.data[7],
+			&ck.data[8] , &ck.data[9],
+			&ck.data[10], &ck.data[11],
+			&ck.data[12], &ck.data[13],
+			&ck.data[14], &ck.data[15]);
+	if (result != 16)
+		return -EINVAL;
+
+	usb_dev = to_usb_device(dev);
+	wusbhc = wusbhc_get_by_usb_dev(usb_dev);
+	if (wusbhc == NULL)
+		return -ENODEV;
+	result = wusb_dev_4way_handshake(wusbhc, usb_dev->wusb_dev, &ck);
+	memset(&ck, 0, sizeof(ck));
+	wusbhc_put(wusbhc);
+	return result < 0 ? result : size;
+}
+static DEVICE_ATTR(wusb_ck, 0200, NULL, wusb_ck_store);
+
+static struct attribute *wusb_dev_attrs[] = {
+		&dev_attr_wusb_disconnect.attr,
+		&dev_attr_wusb_cdid.attr,
+		&dev_attr_wusb_ck.attr,
+		NULL,
+};
+
+static struct attribute_group wusb_dev_attr_group = {
+	.name = NULL,	/* we want them in the same directory */
+	.attrs = wusb_dev_attrs,
+};
+
+int wusb_dev_sysfs_add(struct wusbhc *wusbhc, struct usb_device *usb_dev,
+		       struct wusb_dev *wusb_dev)
+{
+	int result = sysfs_create_group(&usb_dev->dev.kobj,
+					&wusb_dev_attr_group);
+	struct device *dev = &usb_dev->dev;
+	if (result < 0)
+		dev_err(dev, "Cannot register WUSB-dev attributes: %d\n",
+			result);
+	return result;
+}
+
+void wusb_dev_sysfs_rm(struct wusb_dev *wusb_dev)
+{
+	struct usb_device *usb_dev = wusb_dev->usb_dev;
+	if (usb_dev)
+		sysfs_remove_group(&usb_dev->dev.kobj, &wusb_dev_attr_group);
+}
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
new file mode 100644
index 0000000..f45d777
--- /dev/null
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -0,0 +1,1297 @@
+/*
+ * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8])
+ * Device Connect handling
+ *
+ * Copyright (C) 2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ * FIXME: this file needs to be broken up, it's grown too big
+ *
+ *
+ * WUSB1.0[7.1, 7.5.1, ]
+ *
+ * WUSB device connection is kind of messy. Some background:
+ *
+ *     When a device wants to connect it scans the UWB radio channels
+ *     looking for a WUSB Channel; a WUSB channel is defined by MMCs
+ *     (Micro Managed Commands or something like that) [see
+ *     Design-overview for more on this] .
+ *
+ * So, device scans the radio, finds MMCs and thus a host and checks
+ * when the next DNTS is. It sends a Device Notification Connect
+ * (DN_Connect); the host picks it up (through nep.c and notif.c, ends
+ * up in wusb_devconnect_ack(), which creates a wusb_dev structure in
+ * wusbhc->port[port_number].wusb_dev), assigns an unauth address
+ * to the device (this means from 0x80 to 0xfe) and sends, in the MMC
+ * a Connect Ack Information Element (ConnAck IE).
+ *
+ * So now the device now has a WUSB address. From now on, we use
+ * that to talk to it in the RPipes.
+ *
+ * ASSUMPTIONS:
+ *
+ *  - We use the the as device address the port number where it is
+ *    connected (port 0 doesn't exist). For unauth, it is 128 + that.
+ *
+ * ROADMAP:
+ *
+ *   This file contains the logic for doing that--entry points:
+ *
+ *   wusb_devconnect_ack()      Ack a device until _acked() called.
+ *                              Called by notif.c:wusb_handle_dn_connect()
+ *                              when a DN_Connect is received.
+ *
+ *   wusbhc_devconnect_auth()   Called by rh.c:wusbhc_rh_port_reset() when
+ *                              doing the device connect sequence.
+ *
+ *     wusb_devconnect_acked()  Ack done, release resources.
+ *
+ *   wusb_handle_dn_alive()     Called by notif.c:wusb_handle_dn()
+ *                              for processing a DN_Alive pong from a device.
+ *
+ *   wusb_handle_dn_disconnect()Called by notif.c:wusb_handle_dn() to
+ *                              process a disconenct request from a
+ *                              device.
+ *
+ *   wusb_dev_reset()           Called by rh.c:wusbhc_rh_port_reset() when
+ *                              resetting a device.
+ *
+ *   __wusb_dev_disable()       Called by rh.c:wusbhc_rh_clear_port_feat() when
+ *                              disabling a port.
+ *
+ *   wusb_devconnect_create()   Called when creating the host by
+ *                              lc.c:wusbhc_create().
+ *
+ *   wusb_devconnect_destroy()  Cleanup called removing the host. Called
+ *                              by lc.c:wusbhc_destroy().
+ *
+ *   Each Wireless USB host maintains a list of DN_Connect requests
+ *   (actually we maintain a list of pending Connect Acks, the
+ *   wusbhc->ca_list).
+ *
+ * LIFE CYCLE OF port->wusb_dev
+ *
+ *   Before the @wusbhc structure put()s the reference it owns for
+ *   port->wusb_dev [and clean the wusb_dev pointer], it needs to
+ *   lock @wusbhc->mutex.
+ */
+
+#include <linux/jiffies.h>
+#include <linux/ctype.h>
+#include <linux/workqueue.h>
+#include "wusbhc.h"
+
+#undef D_LOCAL
+#define D_LOCAL 1
+#include <linux/uwb/debug.h>
+
+static void wusbhc_devconnect_acked_work(struct work_struct *work);
+
+static void wusb_dev_free(struct wusb_dev *wusb_dev)
+{
+	if (wusb_dev) {
+		kfree(wusb_dev->set_gtk_req);
+		usb_free_urb(wusb_dev->set_gtk_urb);
+		kfree(wusb_dev);
+	}
+}
+
+static struct wusb_dev *wusb_dev_alloc(struct wusbhc *wusbhc)
+{
+	struct wusb_dev *wusb_dev;
+	struct urb *urb;
+	struct usb_ctrlrequest *req;
+
+	wusb_dev = kzalloc(sizeof(*wusb_dev), GFP_KERNEL);
+	if (wusb_dev == NULL)
+		goto err;
+
+	wusb_dev->wusbhc = wusbhc;
+
+	INIT_WORK(&wusb_dev->devconnect_acked_work, wusbhc_devconnect_acked_work);
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (urb == NULL)
+		goto err;
+
+	req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+	if (req == NULL)
+		goto err;
+
+	req->bRequestType = USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE;
+	req->bRequest = USB_REQ_SET_DESCRIPTOR;
+	req->wValue = cpu_to_le16(USB_DT_KEY << 8 | wusbhc->gtk_index);
+	req->wIndex = 0;
+	req->wLength = cpu_to_le16(wusbhc->gtk.descr.bLength);
+
+	wusb_dev->set_gtk_urb = urb;
+	wusb_dev->set_gtk_req = req;
+
+	return wusb_dev;
+err:
+	wusb_dev_free(wusb_dev);
+	return NULL;
+}
+
+
+/*
+ * Using the Connect-Ack list, fill out the @wusbhc Connect-Ack WUSB IE
+ * properly so that it can be added to the MMC.
+ *
+ * We just get the @wusbhc->ca_list and fill out the first four ones or
+ * less (per-spec WUSB1.0[7.5, before T7-38). If the ConnectAck WUSB
+ * IE is not allocated, we alloc it.
+ *
+ * @wusbhc->mutex must be taken
+ */
+static void wusbhc_fill_cack_ie(struct wusbhc *wusbhc)
+{
+	unsigned cnt;
+	struct wusb_dev *dev_itr;
+	struct wuie_connect_ack *cack_ie;
+
+	cack_ie = &wusbhc->cack_ie;
+	cnt = 0;
+	list_for_each_entry(dev_itr, &wusbhc->cack_list, cack_node) {
+		cack_ie->blk[cnt].CDID = dev_itr->cdid;
+		cack_ie->blk[cnt].bDeviceAddress = dev_itr->addr;
+		if (++cnt >= WUIE_ELT_MAX)
+			break;
+	}
+	cack_ie->hdr.bLength = sizeof(cack_ie->hdr)
+		+ cnt * sizeof(cack_ie->blk[0]);
+}
+
+/*
+ * Register a new device that wants to connect
+ *
+ * A new device wants to connect, so we add it to the Connect-Ack
+ * list. We give it an address in the unauthorized range (bit 8 set);
+ * user space will have to drive authorization further on.
+ *
+ * @dev_addr: address to use for the device (which is also the port
+ *            number).
+ *
+ * @wusbhc->mutex must be taken
+ */
+static struct wusb_dev *wusbhc_cack_add(struct wusbhc *wusbhc,
+					struct wusb_dn_connect *dnc,
+					const char *pr_cdid, u8 port_idx)
+{
+	struct device *dev = wusbhc->dev;
+	struct wusb_dev *wusb_dev;
+	int new_connection = wusb_dn_connect_new_connection(dnc);
+	u8 dev_addr;
+	int result;
+
+	/* Is it registered already? */
+	list_for_each_entry(wusb_dev, &wusbhc->cack_list, cack_node)
+		if (!memcmp(&wusb_dev->cdid, &dnc->CDID,
+			    sizeof(wusb_dev->cdid)))
+			return wusb_dev;
+	/* We don't have it, create an entry, register it */
+	wusb_dev = wusb_dev_alloc(wusbhc);
+	if (wusb_dev == NULL)
+		return NULL;
+	wusb_dev_init(wusb_dev);
+	wusb_dev->cdid = dnc->CDID;
+	wusb_dev->port_idx = port_idx;
+
+	/*
+	 * Devices are always available within the cluster reservation
+	 * and since the hardware will take the intersection of the
+	 * per-device availability and the cluster reservation, the
+	 * per-device availability can simply be set to always
+	 * available.
+	 */
+	bitmap_fill(wusb_dev->availability.bm, UWB_NUM_MAS);
+
+	/* FIXME: handle reconnects instead of assuming connects are
+	   always new. */
+	if (1 && new_connection == 0)
+		new_connection = 1;
+	if (new_connection) {
+		dev_addr = (port_idx + 2) | WUSB_DEV_ADDR_UNAUTH;
+
+		dev_info(dev, "Connecting new WUSB device to address %u, "
+			"port %u\n", dev_addr, port_idx);
+
+		result = wusb_set_dev_addr(wusbhc, wusb_dev, dev_addr);
+		if (result < 0)
+			return NULL;
+	}
+	wusb_dev->entry_ts = jiffies;
+	list_add_tail(&wusb_dev->cack_node, &wusbhc->cack_list);
+	wusbhc->cack_count++;
+	wusbhc_fill_cack_ie(wusbhc);
+	return wusb_dev;
+}
+
+/*
+ * Remove a Connect-Ack context entry from the HCs view
+ *
+ * @wusbhc->mutex must be taken
+ */
+static void wusbhc_cack_rm(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
+{
+	struct device *dev = wusbhc->dev;
+	d_fnstart(3, dev, "(wusbhc %p wusb_dev %p)\n", wusbhc, wusb_dev);
+	list_del_init(&wusb_dev->cack_node);
+	wusbhc->cack_count--;
+	wusbhc_fill_cack_ie(wusbhc);
+	d_fnend(3, dev, "(wusbhc %p wusb_dev %p) = void\n", wusbhc, wusb_dev);
+}
+
+/*
+ * @wusbhc->mutex must be taken */
+static
+void wusbhc_devconnect_acked(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
+{
+	struct device *dev = wusbhc->dev;
+	d_fnstart(3, dev, "(wusbhc %p wusb_dev %p)\n", wusbhc, wusb_dev);
+	wusbhc_cack_rm(wusbhc, wusb_dev);
+	if (wusbhc->cack_count)
+		wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->cack_ie.hdr);
+	else
+		wusbhc_mmcie_rm(wusbhc, &wusbhc->cack_ie.hdr);
+	d_fnend(3, dev, "(wusbhc %p wusb_dev %p) = void\n", wusbhc, wusb_dev);
+}
+
+static void wusbhc_devconnect_acked_work(struct work_struct *work)
+{
+	struct wusb_dev *wusb_dev = container_of(work, struct wusb_dev,
+						 devconnect_acked_work);
+	struct wusbhc *wusbhc = wusb_dev->wusbhc;
+
+	mutex_lock(&wusbhc->mutex);
+	wusbhc_devconnect_acked(wusbhc, wusb_dev);
+	mutex_unlock(&wusbhc->mutex);
+}
+
+/*
+ * Ack a device for connection
+ *
+ * FIXME: docs
+ *
+ * @pr_cdid:	Printable CDID...hex Use @dnc->cdid for the real deal.
+ *
+ * So we get the connect ack IE (may have been allocated already),
+ * find an empty connect block, an empty virtual port, create an
+ * address with it (see below), make it an unauth addr [bit 7 set] and
+ * set the MMC.
+ *
+ * Addresses: because WUSB hosts have no downstream hubs, we can do a
+ *            1:1 mapping between 'port number' and device
+ *            address. This simplifies many things, as during this
+ *            initial connect phase the USB stack has no knoledge of
+ *            the device and hasn't assigned an address yet--we know
+ *            USB's choose_address() will use the same euristics we
+ *            use here, so we can assume which address will be assigned.
+ *
+ *            USB stack always assigns address 1 to the root hub, so
+ *            to the port number we add 2 (thus virtual port #0 is
+ *            addr #2).
+ *
+ * @wusbhc shall be referenced
+ */
+static
+void wusbhc_devconnect_ack(struct wusbhc *wusbhc, struct wusb_dn_connect *dnc,
+			   const char *pr_cdid)
+{
+	int result;
+	struct device *dev = wusbhc->dev;
+	struct wusb_dev *wusb_dev;
+	struct wusb_port *port;
+	unsigned idx, devnum;
+
+	d_fnstart(3, dev, "(%p, %p, %s)\n", wusbhc, dnc, pr_cdid);
+	mutex_lock(&wusbhc->mutex);
+
+	/* Check we are not handling it already */
+	for (idx = 0; idx < wusbhc->ports_max; idx++) {
+		port = wusb_port_by_idx(wusbhc, idx);
+		if (port->wusb_dev
+		    && memcmp(&dnc->CDID, &port->wusb_dev->cdid, sizeof(dnc->CDID)) == 0)
+			goto error_unlock;
+	}
+	/* Look up those fake ports we have for a free one */
+	for (idx = 0; idx < wusbhc->ports_max; idx++) {
+		port = wusb_port_by_idx(wusbhc, idx);
+		if ((port->status & USB_PORT_STAT_POWER)
+		    && !(port->status & USB_PORT_STAT_CONNECTION))
+			break;
+	}
+	if (idx >= wusbhc->ports_max) {
+		dev_err(dev, "Host controller can't connect more devices "
+			"(%u already connected); device %s rejected\n",
+			wusbhc->ports_max, pr_cdid);
+		/* NOTE: we could send a WUIE_Disconnect here, but we haven't
+		 *       event acked, so the device will eventually timeout the
+		 *       connection, right? */
+		goto error_unlock;
+	}
+
+	devnum = idx + 2;
+
+	/* Make sure we are using no crypto on that "virtual port" */
+	wusbhc->set_ptk(wusbhc, idx, 0, NULL, 0);
+
+	/* Grab a filled in Connect-Ack context, fill out the
+	 * Connect-Ack Wireless USB IE, set the MMC */
+	wusb_dev = wusbhc_cack_add(wusbhc, dnc, pr_cdid, idx);
+	if (wusb_dev == NULL)
+		goto error_unlock;
+	result = wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->cack_ie.hdr);
+	if (result < 0)
+		goto error_unlock;
+	/* Give the device at least 2ms (WUSB1.0[7.5.1p3]), let's do
+	 * three for a good measure */
+	msleep(3);
+	port->wusb_dev = wusb_dev;
+	port->status |= USB_PORT_STAT_CONNECTION;
+	port->change |= USB_PORT_STAT_C_CONNECTION;
+	port->reset_count = 0;
+	/* Now the port status changed to connected; khubd will
+	 * pick the change up and try to reset the port to bring it to
+	 * the enabled state--so this process returns up to the stack
+	 * and it calls back into wusbhc_rh_port_reset() who will call
+	 * devconnect_auth().
+	 */
+error_unlock:
+	mutex_unlock(&wusbhc->mutex);
+	d_fnend(3, dev, "(%p, %p, %s) = void\n", wusbhc, dnc, pr_cdid);
+	return;
+
+}
+
+/*
+ * Disconnect a Wireless USB device from its fake port
+ *
+ * Marks the port as disconnected so that khubd can pick up the change
+ * and drops our knowledge about the device.
+ *
+ * Assumes there is a device connected
+ *
+ * @port_index: zero based port number
+ *
+ * NOTE: @wusbhc->mutex is locked
+ *
+ * WARNING: From here it is not very safe to access anything hanging off
+ *	    wusb_dev
+ */
+static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc,
+				    struct wusb_port *port)
+{
+	struct device *dev = wusbhc->dev;
+	struct wusb_dev *wusb_dev = port->wusb_dev;
+
+	d_fnstart(3, dev, "(wusbhc %p, port %p)\n", wusbhc, port);
+	port->status &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE
+			  | USB_PORT_STAT_SUSPEND | USB_PORT_STAT_RESET
+			  | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED);
+	port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE;
+	if (wusb_dev) {
+		if (!list_empty(&wusb_dev->cack_node))
+			list_del_init(&wusb_dev->cack_node);
+		/* For the one in cack_add() */
+		wusb_dev_put(wusb_dev);
+	}
+	port->wusb_dev = NULL;
+	/* don't reset the reset_count to zero or wusbhc_rh_port_reset will get
+	 * confused! We only reset to zero when we connect a new device.
+	 */
+
+	/* After a device disconnects, change the GTK (see [WUSB]
+	 * section 6.2.11.2). */
+	wusbhc_gtk_rekey(wusbhc);
+
+	d_fnend(3, dev, "(wusbhc %p, port %p) = void\n", wusbhc, port);
+	/* The Wireless USB part has forgotten about the device already; now
+	 * khubd's timer will pick up the disconnection and remove the USB
+	 * device from the system
+	 */
+}
+
+/*
+ * Authenticate a device into the WUSB Cluster
+ *
+ * Called from the Root Hub code (rh.c:wusbhc_rh_port_reset()) when
+ * asking for a reset on a port that is not enabled (ie: first connect
+ * on the port).
+ *
+ * Performs the 4way handshake to allow the device to comunicate w/ the
+ * WUSB Cluster securely; once done, issue a request to the device for
+ * it to change to address 0.
+ *
+ * This mimics the reset step of Wired USB that once resetting a
+ * device, leaves the port in enabled state and the dev with the
+ * default address (0).
+ *
+ * WUSB1.0[7.1.2]
+ *
+ * @port_idx: port where the change happened--This is the index into
+ *            the wusbhc port array, not the USB port number.
+ */
+int wusbhc_devconnect_auth(struct wusbhc *wusbhc, u8 port_idx)
+{
+	struct device *dev = wusbhc->dev;
+	struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx);
+
+	d_fnstart(3, dev, "(%p, %u)\n", wusbhc, port_idx);
+	port->status &= ~USB_PORT_STAT_RESET;
+	port->status |= USB_PORT_STAT_ENABLE;
+	port->change |= USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_ENABLE;
+	d_fnend(3, dev, "(%p, %u) = 0\n", wusbhc, port_idx);
+	return 0;
+}
+
+/*
+ * Refresh the list of keep alives to emit in the MMC
+ *
+ * Some devices don't respond to keep alives unless they've been
+ * authenticated, so skip unauthenticated devices.
+ *
+ * We only publish the first four devices that have a coming timeout
+ * condition. Then when we are done processing those, we go for the
+ * next ones. We ignore the ones that have timed out already (they'll
+ * be purged).
+ *
+ * This might cause the first devices to timeout the last devices in
+ * the port array...FIXME: come up with a better algorithm?
+ *
+ * Note we can't do much about MMC's ops errors; we hope next refresh
+ * will kind of handle it.
+ *
+ * NOTE: @wusbhc->mutex is locked
+ */
+static void __wusbhc_keep_alive(struct wusbhc *wusbhc)
+{
+	struct device *dev = wusbhc->dev;
+	unsigned cnt;
+	struct wusb_dev *wusb_dev;
+	struct wusb_port *wusb_port;
+	struct wuie_keep_alive *ie = &wusbhc->keep_alive_ie;
+	unsigned keep_alives, old_keep_alives;
+
+	old_keep_alives = ie->hdr.bLength - sizeof(ie->hdr);
+	keep_alives = 0;
+	for (cnt = 0;
+	     keep_alives <= WUIE_ELT_MAX && cnt < wusbhc->ports_max;
+	     cnt++) {
+		unsigned tt = msecs_to_jiffies(wusbhc->trust_timeout);
+
+		wusb_port = wusb_port_by_idx(wusbhc, cnt);
+		wusb_dev = wusb_port->wusb_dev;
+
+		if (wusb_dev == NULL)
+			continue;
+		if (wusb_dev->usb_dev == NULL || !wusb_dev->usb_dev->authenticated)
+			continue;
+
+		if (time_after(jiffies, wusb_dev->entry_ts + tt)) {
+			dev_err(dev, "KEEPALIVE: device %u timed out\n",
+				wusb_dev->addr);
+			__wusbhc_dev_disconnect(wusbhc, wusb_port);
+		} else if (time_after(jiffies, wusb_dev->entry_ts + tt/2)) {
+			/* Approaching timeout cut out, need to refresh */
+			ie->bDeviceAddress[keep_alives++] = wusb_dev->addr;
+		}
+	}
+	if (keep_alives & 0x1)	/* pad to even number ([WUSB] section 7.5.9) */
+		ie->bDeviceAddress[keep_alives++] = 0x7f;
+	ie->hdr.bLength = sizeof(ie->hdr) +
+		keep_alives*sizeof(ie->bDeviceAddress[0]);
+	if (keep_alives > 0)
+		wusbhc_mmcie_set(wusbhc, 10, 5, &ie->hdr);
+	else if (old_keep_alives != 0)
+		wusbhc_mmcie_rm(wusbhc, &ie->hdr);
+}
+
+/*
+ * Do a run through all devices checking for timeouts
+ */
+static void wusbhc_keep_alive_run(struct work_struct *ws)
+{
+	struct delayed_work *dw =
+		container_of(ws, struct delayed_work, work);
+	struct wusbhc *wusbhc =
+		container_of(dw, struct wusbhc, keep_alive_timer);
+
+	d_fnstart(5, wusbhc->dev, "(wusbhc %p)\n", wusbhc);
+	if (wusbhc->active) {
+		mutex_lock(&wusbhc->mutex);
+		__wusbhc_keep_alive(wusbhc);
+		mutex_unlock(&wusbhc->mutex);
+		queue_delayed_work(wusbd, &wusbhc->keep_alive_timer,
+				   (wusbhc->trust_timeout * CONFIG_HZ)/1000/2);
+	}
+	d_fnend(5, wusbhc->dev, "(wusbhc %p) = void\n", wusbhc);
+	return;
+}
+
+/*
+ * Find the wusb_dev from its device address.
+ *
+ * The device can be found directly from the address (see
+ * wusb_cack_add() for where the device address is set to port_idx
+ * +2), except when the address is zero.
+ */
+static struct wusb_dev *wusbhc_find_dev_by_addr(struct wusbhc *wusbhc, u8 addr)
+{
+	int p;
+
+	if (addr == 0xff) /* unconnected */
+		return NULL;
+
+	if (addr > 0) {
+		int port = (addr & ~0x80) - 2;
+		if (port < 0 || port >= wusbhc->ports_max)
+			return NULL;
+		return wusb_port_by_idx(wusbhc, port)->wusb_dev;
+	}
+
+	/* Look for the device with address 0. */
+	for (p = 0; p < wusbhc->ports_max; p++) {
+		struct wusb_dev *wusb_dev = wusb_port_by_idx(wusbhc, p)->wusb_dev;
+		if (wusb_dev && wusb_dev->addr == addr)
+			return wusb_dev;
+	}
+	return NULL;
+}
+
+/*
+ * Handle a DN_Alive notification (WUSB1.0[7.6.1])
+ *
+ * This just updates the device activity timestamp and then refreshes
+ * the keep alive IE.
+ *
+ * @wusbhc shall be referenced and unlocked
+ */
+static void wusbhc_handle_dn_alive(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
+{
+	struct device *dev = wusbhc->dev;
+
+	d_printf(2, dev, "DN ALIVE: device 0x%02x pong\n", wusb_dev->addr);
+
+	mutex_lock(&wusbhc->mutex);
+	wusb_dev->entry_ts = jiffies;
+	__wusbhc_keep_alive(wusbhc);
+	mutex_unlock(&wusbhc->mutex);
+}
+
+/*
+ * Handle a DN_Connect notification (WUSB1.0[7.6.1])
+ *
+ * @wusbhc
+ * @pkt_hdr
+ * @size:    Size of the buffer where the notification resides; if the
+ *           notification data suggests there should be more data than
+ *           available, an error will be signaled and the whole buffer
+ *           consumed.
+ *
+ * @wusbhc->mutex shall be held
+ */
+static void wusbhc_handle_dn_connect(struct wusbhc *wusbhc,
+				     struct wusb_dn_hdr *dn_hdr,
+				     size_t size)
+{
+	struct device *dev = wusbhc->dev;
+	struct wusb_dn_connect *dnc;
+	char pr_cdid[WUSB_CKHDID_STRSIZE];
+	static const char *beacon_behaviour[] = {
+		"reserved",
+		"self-beacon",
+		"directed-beacon",
+		"no-beacon"
+	};
+
+	d_fnstart(3, dev, "(%p, %p, %zu)\n", wusbhc, dn_hdr, size);
+	if (size < sizeof(*dnc)) {
+		dev_err(dev, "DN CONNECT: short notification (%zu < %zu)\n",
+			size, sizeof(*dnc));
+		goto out;
+	}
+
+	dnc = container_of(dn_hdr, struct wusb_dn_connect, hdr);
+	ckhdid_printf(pr_cdid, sizeof(pr_cdid), &dnc->CDID);
+	dev_info(dev, "DN CONNECT: device %s @ %x (%s) wants to %s\n",
+		 pr_cdid,
+		 wusb_dn_connect_prev_dev_addr(dnc),
+		 beacon_behaviour[wusb_dn_connect_beacon_behavior(dnc)],
+		 wusb_dn_connect_new_connection(dnc) ? "connect" : "reconnect");
+	/* ACK the connect */
+	wusbhc_devconnect_ack(wusbhc, dnc, pr_cdid);
+out:
+	d_fnend(3, dev, "(%p, %p, %zu) = void\n",
+		wusbhc, dn_hdr, size);
+	return;
+}
+
+/*
+ * Handle a DN_Disconnect notification (WUSB1.0[7.6.1])
+ *
+ * Device is going down -- do the disconnect.
+ *
+ * @wusbhc shall be referenced and unlocked
+ */
+static void wusbhc_handle_dn_disconnect(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
+{
+	struct device *dev = wusbhc->dev;
+
+	dev_info(dev, "DN DISCONNECT: device 0x%02x going down\n", wusb_dev->addr);
+
+	mutex_lock(&wusbhc->mutex);
+	__wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, wusb_dev->port_idx));
+	mutex_unlock(&wusbhc->mutex);
+}
+
+/*
+ * Reset a WUSB device on a HWA
+ *
+ * @wusbhc
+ * @port_idx   Index of the port where the device is
+ *
+ * In Wireless USB, a reset is more or less equivalent to a full
+ * disconnect; so we just do a full disconnect and send the device a
+ * Device Reset IE (WUSB1.0[7.5.11]) giving it a few millisecs (6 MMCs).
+ *
+ * @wusbhc should be refcounted and unlocked
+ */
+int wusbhc_dev_reset(struct wusbhc *wusbhc, u8 port_idx)
+{
+	int result;
+	struct device *dev = wusbhc->dev;
+	struct wusb_dev *wusb_dev;
+	struct wuie_reset *ie;
+
+	d_fnstart(3, dev, "(%p, %u)\n", wusbhc, port_idx);
+	mutex_lock(&wusbhc->mutex);
+	result = 0;
+	wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev;
+	if (wusb_dev == NULL) {
+		/* reset no device? ignore */
+		dev_dbg(dev, "RESET: no device at port %u, ignoring\n",
+			port_idx);
+		goto error_unlock;
+	}
+	result = -ENOMEM;
+	ie = kzalloc(sizeof(*ie), GFP_KERNEL);
+	if (ie == NULL)
+		goto error_unlock;
+	ie->hdr.bLength = sizeof(ie->hdr) + sizeof(ie->CDID);
+	ie->hdr.bIEIdentifier = WUIE_ID_RESET_DEVICE;
+	ie->CDID = wusb_dev->cdid;
+	result = wusbhc_mmcie_set(wusbhc, 0xff, 6, &ie->hdr);
+	if (result < 0) {
+		dev_err(dev, "RESET: cant's set MMC: %d\n", result);
+		goto error_kfree;
+	}
+	__wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx));
+
+	/* 120ms, hopefully 6 MMCs (FIXME) */
+	msleep(120);
+	wusbhc_mmcie_rm(wusbhc, &ie->hdr);
+error_kfree:
+	kfree(ie);
+error_unlock:
+	mutex_unlock(&wusbhc->mutex);
+	d_fnend(3, dev, "(%p, %u) = %d\n", wusbhc, port_idx, result);
+	return result;
+}
+
+/*
+ * Handle a Device Notification coming a host
+ *
+ * The Device Notification comes from a host (HWA, DWA or WHCI)
+ * wrapped in a set of headers. Somebody else has peeled off those
+ * headers for us and we just get one Device Notifications.
+ *
+ * Invalid DNs (e.g., too short) are discarded.
+ *
+ * @wusbhc shall be referenced
+ *
+ * FIXMES:
+ *  - implement priorities as in WUSB1.0[Table 7-55]?
+ */
+void wusbhc_handle_dn(struct wusbhc *wusbhc, u8 srcaddr,
+		      struct wusb_dn_hdr *dn_hdr, size_t size)
+{
+	struct device *dev = wusbhc->dev;
+	struct wusb_dev *wusb_dev;
+
+	d_fnstart(3, dev, "(%p, %p)\n", wusbhc, dn_hdr);
+
+	if (size < sizeof(struct wusb_dn_hdr)) {
+		dev_err(dev, "DN data shorter than DN header (%d < %d)\n",
+			(int)size, (int)sizeof(struct wusb_dn_hdr));
+		goto out;
+	}
+
+	wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr);
+	if (wusb_dev == NULL && dn_hdr->bType != WUSB_DN_CONNECT) {
+		dev_dbg(dev, "ignoring DN %d from unconnected device %02x\n",
+			dn_hdr->bType, srcaddr);
+		goto out;
+	}
+
+	switch (dn_hdr->bType) {
+	case WUSB_DN_CONNECT:
+		wusbhc_handle_dn_connect(wusbhc, dn_hdr, size);
+		break;
+	case WUSB_DN_ALIVE:
+		wusbhc_handle_dn_alive(wusbhc, wusb_dev);
+		break;
+	case WUSB_DN_DISCONNECT:
+		wusbhc_handle_dn_disconnect(wusbhc, wusb_dev);
+		break;
+	case WUSB_DN_MASAVAILCHANGED:
+	case WUSB_DN_RWAKE:
+	case WUSB_DN_SLEEP:
+		/* FIXME: handle these DNs. */
+		break;
+	case WUSB_DN_EPRDY:
+		/* The hardware handles these. */
+		break;
+	default:
+		dev_warn(dev, "unknown DN %u (%d octets) from %u\n",
+			 dn_hdr->bType, (int)size, srcaddr);
+	}
+out:
+	d_fnend(3, dev, "(%p, %p) = void\n", wusbhc, dn_hdr);
+	return;
+}
+EXPORT_SYMBOL_GPL(wusbhc_handle_dn);
+
+/*
+ * Disconnect a WUSB device from a the cluster
+ *
+ * @wusbhc
+ * @port     Fake port where the device is (wusbhc index, not USB port number).
+ *
+ * In Wireless USB, a disconnect is basically telling the device he is
+ * being disconnected and forgetting about him.
+ *
+ * We send the device a Device Disconnect IE (WUSB1.0[7.5.11]) for 100
+ * ms and then keep going.
+ *
+ * We don't do much in case of error; we always pretend we disabled
+ * the port and disconnected the device. If physically the request
+ * didn't get there (many things can fail in the way there), the stack
+ * will reject the device's communication attempts.
+ *
+ * @wusbhc should be refcounted and locked
+ */
+void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port_idx)
+{
+	int result;
+	struct device *dev = wusbhc->dev;
+	struct wusb_dev *wusb_dev;
+	struct wuie_disconnect *ie;
+
+	d_fnstart(3, dev, "(%p, %u)\n", wusbhc, port_idx);
+	result = 0;
+	wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev;
+	if (wusb_dev == NULL) {
+		/* reset no device? ignore */
+		dev_dbg(dev, "DISCONNECT: no device at port %u, ignoring\n",
+			port_idx);
+		goto error;
+	}
+	__wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx));
+
+	result = -ENOMEM;
+	ie = kzalloc(sizeof(*ie), GFP_KERNEL);
+	if (ie == NULL)
+		goto error;
+	ie->hdr.bLength = sizeof(*ie);
+	ie->hdr.bIEIdentifier = WUIE_ID_DEVICE_DISCONNECT;
+	ie->bDeviceAddress = wusb_dev->addr;
+	result = wusbhc_mmcie_set(wusbhc, 0, 0, &ie->hdr);
+	if (result < 0) {
+		dev_err(dev, "DISCONNECT: can't set MMC: %d\n", result);
+		goto error_kfree;
+	}
+
+	/* 120ms, hopefully 6 MMCs */
+	msleep(100);
+	wusbhc_mmcie_rm(wusbhc, &ie->hdr);
+error_kfree:
+	kfree(ie);
+error:
+	d_fnend(3, dev, "(%p, %u) = %d\n", wusbhc, port_idx, result);
+	return;
+}
+
+static void wusb_cap_descr_printf(const unsigned level, struct device *dev,
+				  const struct usb_wireless_cap_descriptor *wcd)
+{
+	d_printf(level, dev,
+		 "WUSB Capability Descriptor\n"
+		 "  bDevCapabilityType          0x%02x\n"
+		 "  bmAttributes                0x%02x\n"
+		 "  wPhyRates                   0x%04x\n"
+		 "  bmTFITXPowerInfo            0x%02x\n"
+		 "  bmFFITXPowerInfo            0x%02x\n"
+		 "  bmBandGroup                 0x%04x\n"
+		 "  bReserved                   0x%02x\n",
+		 wcd->bDevCapabilityType,
+		 wcd->bmAttributes,
+		 le16_to_cpu(wcd->wPHYRates),
+		 wcd->bmTFITXPowerInfo,
+		 wcd->bmFFITXPowerInfo,
+		 wcd->bmBandGroup,
+		 wcd->bReserved);
+}
+
+/*
+ * Walk over the BOS descriptor, verify and grok it
+ *
+ * @usb_dev: referenced
+ * @wusb_dev: referenced and unlocked
+ *
+ * The BOS descriptor is defined at WUSB1.0[7.4.1], and it defines a
+ * "flexible" way to wrap all kinds of descriptors inside an standard
+ * descriptor (wonder why they didn't use normal descriptors,
+ * btw). Not like they lack code.
+ *
+ * At the end we go to look for the WUSB Device Capabilities
+ * (WUSB1.0[7.4.1.1]) that is wrapped in a device capability descriptor
+ * that is part of the BOS descriptor set. That tells us what does the
+ * device support (dual role, beacon type, UWB PHY rates).
+ */
+static int wusb_dev_bos_grok(struct usb_device *usb_dev,
+			     struct wusb_dev *wusb_dev,
+			     struct usb_bos_descriptor *bos, size_t desc_size)
+{
+	ssize_t result;
+	struct device *dev = &usb_dev->dev;
+	void *itr, *top;
+
+	/* Walk over BOS capabilities, verify them */
+	itr = (void *)bos + sizeof(*bos);
+	top = itr + desc_size - sizeof(*bos);
+	while (itr < top) {
+		struct usb_dev_cap_header *cap_hdr = itr;
+		size_t cap_size;
+		u8 cap_type;
+		if (top - itr < sizeof(*cap_hdr)) {
+			dev_err(dev, "Device BUG? premature end of BOS header "
+				"data [offset 0x%02x]: only %zu bytes left\n",
+				(int)(itr - (void *)bos), top - itr);
+			result = -ENOSPC;
+			goto error_bad_cap;
+		}
+		cap_size = cap_hdr->bLength;
+		cap_type = cap_hdr->bDevCapabilityType;
+		d_printf(4, dev, "BOS Capability: 0x%02x (%zu bytes)\n",
+			 cap_type, cap_size);
+		if (cap_size == 0)
+			break;
+		if (cap_size > top - itr) {
+			dev_err(dev, "Device BUG? premature end of BOS data "
+				"[offset 0x%02x cap %02x %zu bytes]: "
+				"only %zu bytes left\n",
+				(int)(itr - (void *)bos),
+				cap_type, cap_size, top - itr);
+			result = -EBADF;
+			goto error_bad_cap;
+		}
+		d_dump(3, dev, itr, cap_size);
+		switch (cap_type) {
+		case USB_CAP_TYPE_WIRELESS_USB:
+			if (cap_size != sizeof(*wusb_dev->wusb_cap_descr))
+				dev_err(dev, "Device BUG? WUSB Capability "
+					"descriptor is %zu bytes vs %zu "
+					"needed\n", cap_size,
+					sizeof(*wusb_dev->wusb_cap_descr));
+			else {
+				wusb_dev->wusb_cap_descr = itr;
+				wusb_cap_descr_printf(3, dev, itr);
+			}
+			break;
+		default:
+			dev_err(dev, "BUG? Unknown BOS capability 0x%02x "
+				"(%zu bytes) at offset 0x%02x\n", cap_type,
+				cap_size, (int)(itr - (void *)bos));
+		}
+		itr += cap_size;
+	}
+	result = 0;
+error_bad_cap:
+	return result;
+}
+
+/*
+ * Add information from the BOS descriptors to the device
+ *
+ * @usb_dev: referenced
+ * @wusb_dev: referenced and unlocked
+ *
+ * So what we do is we alloc a space for the BOS descriptor of 64
+ * bytes; read the first four bytes which include the wTotalLength
+ * field (WUSB1.0[T7-26]) and if it fits in those 64 bytes, read the
+ * whole thing. If not we realloc to that size.
+ *
+ * Then we call the groking function, that will fill up
+ * wusb_dev->wusb_cap_descr, which is what we'll need later on.
+ */
+static int wusb_dev_bos_add(struct usb_device *usb_dev,
+			    struct wusb_dev *wusb_dev)
+{
+	ssize_t result;
+	struct device *dev = &usb_dev->dev;
+	struct usb_bos_descriptor *bos;
+	size_t alloc_size = 32, desc_size = 4;
+
+	bos = kmalloc(alloc_size, GFP_KERNEL);
+	if (bos == NULL)
+		return -ENOMEM;
+	result = usb_get_descriptor(usb_dev, USB_DT_BOS, 0, bos, desc_size);
+	if (result < 4) {
+		dev_err(dev, "Can't get BOS descriptor or too short: %zd\n",
+			result);
+		goto error_get_descriptor;
+	}
+	desc_size = le16_to_cpu(bos->wTotalLength);
+	if (desc_size >= alloc_size) {
+		kfree(bos);
+		alloc_size = desc_size;
+		bos = kmalloc(alloc_size, GFP_KERNEL);
+		if (bos == NULL)
+			return -ENOMEM;
+	}
+	result = usb_get_descriptor(usb_dev, USB_DT_BOS, 0, bos, desc_size);
+	if (result < 0 || result != desc_size) {
+		dev_err(dev, "Can't get  BOS descriptor or too short (need "
+			"%zu bytes): %zd\n", desc_size, result);
+		goto error_get_descriptor;
+	}
+	if (result < sizeof(*bos)
+	    || le16_to_cpu(bos->wTotalLength) != desc_size) {
+		dev_err(dev, "Can't get  BOS descriptor or too short (need "
+			"%zu bytes): %zd\n", desc_size, result);
+		goto error_get_descriptor;
+	}
+	d_printf(2, dev, "Got BOS descriptor %zd bytes, %u capabilities\n",
+		 result, bos->bNumDeviceCaps);
+	d_dump(2, dev, bos, result);
+	result = wusb_dev_bos_grok(usb_dev, wusb_dev, bos, result);
+	if (result < 0)
+		goto error_bad_bos;
+	wusb_dev->bos = bos;
+	return 0;
+
+error_bad_bos:
+error_get_descriptor:
+	kfree(bos);
+	wusb_dev->wusb_cap_descr = NULL;
+	return result;
+}
+
+static void wusb_dev_bos_rm(struct wusb_dev *wusb_dev)
+{
+	kfree(wusb_dev->bos);
+	wusb_dev->wusb_cap_descr = NULL;
+};
+
+static struct usb_wireless_cap_descriptor wusb_cap_descr_default = {
+	.bLength = sizeof(wusb_cap_descr_default),
+	.bDescriptorType = USB_DT_DEVICE_CAPABILITY,
+	.bDevCapabilityType = USB_CAP_TYPE_WIRELESS_USB,
+
+	.bmAttributes = USB_WIRELESS_BEACON_NONE,
+	.wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53),
+	.bmTFITXPowerInfo = 0,
+	.bmFFITXPowerInfo = 0,
+	.bmBandGroup = cpu_to_le16(0x0001),	/* WUSB1.0[7.4.1] bottom */
+	.bReserved = 0
+};
+
+/*
+ * USB stack's device addition Notifier Callback
+ *
+ * Called from drivers/usb/core/hub.c when a new device is added; we
+ * use this hook to perform certain WUSB specific setup work on the
+ * new device. As well, it is the first time we can connect the
+ * wusb_dev and the usb_dev. So we note it down in wusb_dev and take a
+ * reference that we'll drop.
+ *
+ * First we need to determine if the device is a WUSB device (else we
+ * ignore it). For that we use the speed setting (USB_SPEED_VARIABLE)
+ * [FIXME: maybe we'd need something more definitive]. If so, we track
+ * it's usb_busd and from there, the WUSB HC.
+ *
+ * Because all WUSB HCs are contained in a 'struct wusbhc', voila, we
+ * get the wusbhc for the device.
+ *
+ * We have a reference on @usb_dev (as we are called at the end of its
+ * enumeration).
+ *
+ * NOTE: @usb_dev locked
+ */
+static void wusb_dev_add_ncb(struct usb_device *usb_dev)
+{
+	int result = 0;
+	struct wusb_dev *wusb_dev;
+	struct wusbhc *wusbhc;
+	struct device *dev = &usb_dev->dev;
+	u8 port_idx;
+
+	if (usb_dev->wusb == 0 || usb_dev->devnum == 1)
+		return;		/* skip non wusb and wusb RHs */
+
+	d_fnstart(3, dev, "(usb_dev %p)\n", usb_dev);
+
+	wusbhc = wusbhc_get_by_usb_dev(usb_dev);
+	if (wusbhc == NULL)
+		goto error_nodev;
+	mutex_lock(&wusbhc->mutex);
+	wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev);
+	port_idx = wusb_port_no_to_idx(usb_dev->portnum);
+	mutex_unlock(&wusbhc->mutex);
+	if (wusb_dev == NULL)
+		goto error_nodev;
+	wusb_dev->usb_dev = usb_get_dev(usb_dev);
+	usb_dev->wusb_dev = wusb_dev_get(wusb_dev);
+	result = wusb_dev_sec_add(wusbhc, usb_dev, wusb_dev);
+	if (result < 0) {
+		dev_err(dev, "Cannot enable security: %d\n", result);
+		goto error_sec_add;
+	}
+	/* Now query the device for it's BOS and attach it to wusb_dev */
+	result = wusb_dev_bos_add(usb_dev, wusb_dev);
+	if (result < 0) {
+		dev_err(dev, "Cannot get BOS descriptors: %d\n", result);
+		goto error_bos_add;
+	}
+	result = wusb_dev_sysfs_add(wusbhc, usb_dev, wusb_dev);
+	if (result < 0)
+		goto error_add_sysfs;
+out:
+	wusb_dev_put(wusb_dev);
+	wusbhc_put(wusbhc);
+error_nodev:
+	d_fnend(3, dev, "(usb_dev %p) = void\n", usb_dev);
+	return;
+
+	wusb_dev_sysfs_rm(wusb_dev);
+error_add_sysfs:
+	wusb_dev_bos_rm(wusb_dev);
+error_bos_add:
+	wusb_dev_sec_rm(wusb_dev);
+error_sec_add:
+	mutex_lock(&wusbhc->mutex);
+	__wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx));
+	mutex_unlock(&wusbhc->mutex);
+	goto out;
+}
+
+/*
+ * Undo all the steps done at connection by the notifier callback
+ *
+ * NOTE: @usb_dev locked
+ */
+static void wusb_dev_rm_ncb(struct usb_device *usb_dev)
+{
+	struct wusb_dev *wusb_dev = usb_dev->wusb_dev;
+
+	if (usb_dev->wusb == 0 || usb_dev->devnum == 1)
+		return;		/* skip non wusb and wusb RHs */
+
+	wusb_dev_sysfs_rm(wusb_dev);
+	wusb_dev_bos_rm(wusb_dev);
+	wusb_dev_sec_rm(wusb_dev);
+	wusb_dev->usb_dev = NULL;
+	usb_dev->wusb_dev = NULL;
+	wusb_dev_put(wusb_dev);
+	usb_put_dev(usb_dev);
+}
+
+/*
+ * Handle notifications from the USB stack (notifier call back)
+ *
+ * This is called when the USB stack does a
+ * usb_{bus,device}_{add,remove}() so we can do WUSB specific
+ * handling. It is called with [for the case of
+ * USB_DEVICE_{ADD,REMOVE} with the usb_dev locked.
+ */
+int wusb_usb_ncb(struct notifier_block *nb, unsigned long val,
+		 void *priv)
+{
+	int result = NOTIFY_OK;
+
+	switch (val) {
+	case USB_DEVICE_ADD:
+		wusb_dev_add_ncb(priv);
+		break;
+	case USB_DEVICE_REMOVE:
+		wusb_dev_rm_ncb(priv);
+		break;
+	case USB_BUS_ADD:
+		/* ignore (for now) */
+	case USB_BUS_REMOVE:
+		break;
+	default:
+		WARN_ON(1);
+		result = NOTIFY_BAD;
+	};
+	return result;
+}
+
+/*
+ * Return a referenced wusb_dev given a @wusbhc and @usb_dev
+ */
+struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *wusbhc,
+					   struct usb_device *usb_dev)
+{
+	struct wusb_dev *wusb_dev;
+	u8 port_idx;
+
+	port_idx = wusb_port_no_to_idx(usb_dev->portnum);
+	BUG_ON(port_idx > wusbhc->ports_max);
+	wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev;
+	if (wusb_dev != NULL)		/* ops, device is gone */
+		wusb_dev_get(wusb_dev);
+	return wusb_dev;
+}
+EXPORT_SYMBOL_GPL(__wusb_dev_get_by_usb_dev);
+
+void wusb_dev_destroy(struct kref *_wusb_dev)
+{
+	struct wusb_dev *wusb_dev
+		= container_of(_wusb_dev, struct wusb_dev, refcnt);
+	list_del_init(&wusb_dev->cack_node);
+	wusb_dev_free(wusb_dev);
+	d_fnend(1, NULL, "%s (wusb_dev %p) = void\n", __func__, wusb_dev);
+}
+EXPORT_SYMBOL_GPL(wusb_dev_destroy);
+
+/*
+ * Create all the device connect handling infrastructure
+ *
+ * This is basically the device info array, Connect Acknowledgement
+ * (cack) lists, keep-alive timers (and delayed work thread).
+ */
+int wusbhc_devconnect_create(struct wusbhc *wusbhc)
+{
+	d_fnstart(3, wusbhc->dev, "(wusbhc %p)\n", wusbhc);
+
+	wusbhc->keep_alive_ie.hdr.bIEIdentifier = WUIE_ID_KEEP_ALIVE;
+	wusbhc->keep_alive_ie.hdr.bLength = sizeof(wusbhc->keep_alive_ie.hdr);
+	INIT_DELAYED_WORK(&wusbhc->keep_alive_timer, wusbhc_keep_alive_run);
+
+	wusbhc->cack_ie.hdr.bIEIdentifier = WUIE_ID_CONNECTACK;
+	wusbhc->cack_ie.hdr.bLength = sizeof(wusbhc->cack_ie.hdr);
+	INIT_LIST_HEAD(&wusbhc->cack_list);
+
+	d_fnend(3, wusbhc->dev, "(wusbhc %p) = void\n", wusbhc);
+	return 0;
+}
+
+/*
+ * Release all resources taken by the devconnect stuff
+ */
+void wusbhc_devconnect_destroy(struct wusbhc *wusbhc)
+{
+	d_fnstart(3, wusbhc->dev, "(wusbhc %p)\n", wusbhc);
+	d_fnend(3, wusbhc->dev, "(wusbhc %p) = void\n", wusbhc);
+}
+
+/*
+ * wusbhc_devconnect_start - start accepting device connections
+ * @wusbhc: the WUSB HC
+ *
+ * Sets the Host Info IE to accept all new connections.
+ *
+ * FIXME: This also enables the keep alives but this is not necessary
+ * until there are connected and authenticated devices.
+ */
+int wusbhc_devconnect_start(struct wusbhc *wusbhc,
+			    const struct wusb_ckhdid *chid)
+{
+	struct device *dev = wusbhc->dev;
+	struct wuie_host_info *hi;
+	int result;
+
+	hi = kzalloc(sizeof(*hi), GFP_KERNEL);
+	if (hi == NULL)
+		return -ENOMEM;
+
+	hi->hdr.bLength       = sizeof(*hi);
+	hi->hdr.bIEIdentifier = WUIE_ID_HOST_INFO;
+	hi->attributes        = cpu_to_le16((wusbhc->rsv->stream << 3) | WUIE_HI_CAP_ALL);
+	hi->CHID              = *chid;
+	result = wusbhc_mmcie_set(wusbhc, 0, 0, &hi->hdr);
+	if (result < 0) {
+		dev_err(dev, "Cannot add Host Info MMCIE: %d\n", result);
+		goto error_mmcie_set;
+	}
+	wusbhc->wuie_host_info = hi;
+
+	queue_delayed_work(wusbd, &wusbhc->keep_alive_timer,
+			   (wusbhc->trust_timeout*CONFIG_HZ)/1000/2);
+
+	return 0;
+
+error_mmcie_set:
+	kfree(hi);
+	return result;
+}
+
+/*
+ * wusbhc_devconnect_stop - stop managing connected devices
+ * @wusbhc: the WUSB HC
+ *
+ * Removes the Host Info IE and stops the keep alives.
+ *
+ * FIXME: should this disconnect all devices?
+ */
+void wusbhc_devconnect_stop(struct wusbhc *wusbhc)
+{
+	cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
+	WARN_ON(!list_empty(&wusbhc->cack_list));
+
+	wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr);
+	kfree(wusbhc->wuie_host_info);
+	wusbhc->wuie_host_info = NULL;
+}
+
+/*
+ * wusb_set_dev_addr - set the WUSB device address used by the host
+ * @wusbhc: the WUSB HC the device is connect to
+ * @wusb_dev: the WUSB device
+ * @addr: new device address
+ */
+int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, u8 addr)
+{
+	int result;
+
+	wusb_dev->addr = addr;
+	result = wusbhc->dev_info_set(wusbhc, wusb_dev);
+	if (result < 0)
+		dev_err(wusbhc->dev, "device %d: failed to set device "
+			"address\n", wusb_dev->port_idx);
+	else
+		dev_info(wusbhc->dev, "device %d: %s addr %u\n",
+			 wusb_dev->port_idx,
+			 (addr & WUSB_DEV_ADDR_UNAUTH) ? "unauth" : "auth",
+			 wusb_dev->addr);
+
+	return result;
+}
diff --git a/drivers/usb/wusbcore/mmc.c b/drivers/usb/wusbcore/mmc.c
new file mode 100644
index 0000000..cfa77a0
--- /dev/null
+++ b/drivers/usb/wusbcore/mmc.c
@@ -0,0 +1,321 @@
+/*
+ * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8])
+ * MMC (Microscheduled Management Command) handling
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * WUIEs and MMC IEs...well, they are almost the same at the end. MMC
+ * IEs are Wireless USB IEs that go into the MMC period...[what is
+ * that? look in Design-overview.txt].
+ *
+ *
+ * This is a simple subsystem to keep track of which IEs are being
+ * sent by the host in the MMC period.
+ *
+ * For each WUIE we ask to send, we keep it in an array, so we can
+ * request its removal later, or replace the content. They are tracked
+ * by pointer, so be sure to use the same pointer if you want to
+ * remove it or update the contents.
+ *
+ * FIXME:
+ *  - add timers that autoremove intervalled IEs?
+ */
+#include <linux/usb/wusb.h>
+#include "wusbhc.h"
+
+/* Initialize the MMCIEs handling mechanism */
+int wusbhc_mmcie_create(struct wusbhc *wusbhc)
+{
+	u8 mmcies = wusbhc->mmcies_max;
+	wusbhc->mmcie = kcalloc(mmcies, sizeof(wusbhc->mmcie[0]), GFP_KERNEL);
+	if (wusbhc->mmcie == NULL)
+		return -ENOMEM;
+	mutex_init(&wusbhc->mmcie_mutex);
+	return 0;
+}
+
+/* Release resources used by the MMCIEs handling mechanism */
+void wusbhc_mmcie_destroy(struct wusbhc *wusbhc)
+{
+	kfree(wusbhc->mmcie);
+}
+
+/*
+ * Add or replace an MMC Wireless USB IE.
+ *
+ * @interval:    See WUSB1.0[8.5.3.1]
+ * @repeat_cnt:  See WUSB1.0[8.5.3.1]
+ * @handle:      See WUSB1.0[8.5.3.1]
+ * @wuie:        Pointer to the header of the WUSB IE data to add.
+ *               MUST BE allocated in a kmalloc buffer (no stack or
+ *               vmalloc).
+ *               THE CALLER ALWAYS OWNS THE POINTER (we don't free it
+ *               on remove, we just forget about it).
+ * @returns:     0 if ok, < 0 errno code on error.
+ *
+ * Goes over the *whole* @wusbhc->mmcie array looking for (a) the
+ * first free spot and (b) if @wuie is already in the array (aka:
+ * transmitted in the MMCs) the spot were it is.
+ *
+ * If present, we "overwrite it" (update).
+ *
+ *
+ * NOTE: Need special ordering rules -- see below WUSB1.0 Table 7-38.
+ *       The host uses the handle as the 'sort' index. We
+ *       allocate the last one always for the WUIE_ID_HOST_INFO, and
+ *       the rest, first come first serve in inverse order.
+ *
+ *       Host software must make sure that it adds the other IEs in
+ *       the right order... the host hardware is responsible for
+ *       placing the WCTA IEs in the right place with the other IEs
+ *       set by host software.
+ *
+ * NOTE: we can access wusbhc->wa_descr without locking because it is
+ *       read only.
+ */
+int wusbhc_mmcie_set(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt,
+		     struct wuie_hdr *wuie)
+{
+	int result = -ENOBUFS;
+	unsigned handle, itr;
+
+	/* Search a handle, taking into account the ordering */
+	mutex_lock(&wusbhc->mmcie_mutex);
+	switch (wuie->bIEIdentifier) {
+	case WUIE_ID_HOST_INFO:
+		/* Always last */
+		handle = wusbhc->mmcies_max - 1;
+		break;
+	case WUIE_ID_ISOCH_DISCARD:
+		dev_err(wusbhc->dev, "Special ordering case for WUIE ID 0x%x "
+			"unimplemented\n", wuie->bIEIdentifier);
+		result = -ENOSYS;
+		goto error_unlock;
+	default:
+		/* search for it or find the last empty slot */
+		handle = ~0;
+		for (itr = 0; itr < wusbhc->mmcies_max - 1; itr++) {
+			if (wusbhc->mmcie[itr] == wuie) {
+				handle = itr;
+				break;
+			}
+			if (wusbhc->mmcie[itr] == NULL)
+				handle = itr;
+		}
+		if (handle == ~0)
+			goto error_unlock;
+	}
+	result = (wusbhc->mmcie_add)(wusbhc, interval, repeat_cnt, handle,
+				     wuie);
+	if (result >= 0)
+		wusbhc->mmcie[handle] = wuie;
+error_unlock:
+	mutex_unlock(&wusbhc->mmcie_mutex);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wusbhc_mmcie_set);
+
+/*
+ * Remove an MMC IE previously added with wusbhc_mmcie_set()
+ *
+ * @wuie	Pointer used to add the WUIE
+ */
+void wusbhc_mmcie_rm(struct wusbhc *wusbhc, struct wuie_hdr *wuie)
+{
+	int result;
+	unsigned handle, itr;
+
+	mutex_lock(&wusbhc->mmcie_mutex);
+	for (itr = 0; itr < wusbhc->mmcies_max; itr++) {
+		if (wusbhc->mmcie[itr] == wuie) {
+			handle = itr;
+			goto found;
+		}
+	}
+	mutex_unlock(&wusbhc->mmcie_mutex);
+	return;
+
+found:
+	result = (wusbhc->mmcie_rm)(wusbhc, handle);
+	if (result == 0)
+		wusbhc->mmcie[itr] = NULL;
+	mutex_unlock(&wusbhc->mmcie_mutex);
+}
+EXPORT_SYMBOL_GPL(wusbhc_mmcie_rm);
+
+/*
+ * wusbhc_start - start transmitting MMCs and accepting connections
+ * @wusbhc: the HC to start
+ * @chid: the CHID to use for this host
+ *
+ * Establishes a cluster reservation, enables device connections, and
+ * starts MMCs with appropriate DNTS parameters.
+ */
+int wusbhc_start(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid)
+{
+	int result;
+	struct device *dev = wusbhc->dev;
+
+	WARN_ON(wusbhc->wuie_host_info != NULL);
+
+	result = wusbhc_rsv_establish(wusbhc);
+	if (result < 0) {
+		dev_err(dev, "cannot establish cluster reservation: %d\n",
+			result);
+		goto error_rsv_establish;
+	}
+
+	result = wusbhc_devconnect_start(wusbhc, chid);
+	if (result < 0) {
+		dev_err(dev, "error enabling device connections: %d\n", result);
+		goto error_devconnect_start;
+	}
+
+	result = wusbhc_sec_start(wusbhc);
+	if (result < 0) {
+		dev_err(dev, "error starting security in the HC: %d\n", result);
+		goto error_sec_start;
+	}
+	/* FIXME: the choice of the DNTS parameters is somewhat
+	 * arbitrary */
+	result = wusbhc->set_num_dnts(wusbhc, 0, 15);
+	if (result < 0) {
+		dev_err(dev, "Cannot set DNTS parameters: %d\n", result);
+		goto error_set_num_dnts;
+	}
+	result = wusbhc->start(wusbhc);
+	if (result < 0) {
+		dev_err(dev, "error starting wusbch: %d\n", result);
+		goto error_wusbhc_start;
+	}
+	wusbhc->active = 1;
+	return 0;
+
+error_wusbhc_start:
+	wusbhc_sec_stop(wusbhc);
+error_set_num_dnts:
+error_sec_start:
+	wusbhc_devconnect_stop(wusbhc);
+error_devconnect_start:
+	wusbhc_rsv_terminate(wusbhc);
+error_rsv_establish:
+	return result;
+}
+
+/*
+ * Disconnect all from the WUSB Channel
+ *
+ * Send a Host Disconnect IE in the MMC, wait, don't send it any more
+ */
+static int __wusbhc_host_disconnect_ie(struct wusbhc *wusbhc)
+{
+	int result = -ENOMEM;
+	struct wuie_host_disconnect *host_disconnect_ie;
+	might_sleep();
+	host_disconnect_ie = kmalloc(sizeof(*host_disconnect_ie), GFP_KERNEL);
+	if (host_disconnect_ie == NULL)
+		goto error_alloc;
+	host_disconnect_ie->hdr.bLength       = sizeof(*host_disconnect_ie);
+	host_disconnect_ie->hdr.bIEIdentifier = WUIE_ID_HOST_DISCONNECT;
+	result = wusbhc_mmcie_set(wusbhc, 0, 0, &host_disconnect_ie->hdr);
+	if (result < 0)
+		goto error_mmcie_set;
+
+	/* WUSB1.0[8.5.3.1 & 7.5.2] */
+	msleep(100);
+	wusbhc_mmcie_rm(wusbhc, &host_disconnect_ie->hdr);
+error_mmcie_set:
+	kfree(host_disconnect_ie);
+error_alloc:
+	return result;
+}
+
+/*
+ * wusbhc_stop - stop transmitting MMCs
+ * @wusbhc: the HC to stop
+ *
+ * Send a Host Disconnect IE, wait, remove all the MMCs (stop sending MMCs).
+ *
+ * If we can't allocate a Host Stop IE, screw it, we don't notify the
+ * devices we are disconnecting...
+ */
+void wusbhc_stop(struct wusbhc *wusbhc)
+{
+	if (wusbhc->active) {
+		wusbhc->active = 0;
+		wusbhc->stop(wusbhc);
+		wusbhc_sec_stop(wusbhc);
+		__wusbhc_host_disconnect_ie(wusbhc);
+		wusbhc_devconnect_stop(wusbhc);
+		wusbhc_rsv_terminate(wusbhc);
+	}
+}
+EXPORT_SYMBOL_GPL(wusbhc_stop);
+
+/*
+ * Change the CHID in a WUSB Channel
+ *
+ * If it is just a new CHID, send a Host Disconnect IE and then change
+ * the CHID IE.
+ */
+static int __wusbhc_chid_change(struct wusbhc *wusbhc,
+				const struct wusb_ckhdid *chid)
+{
+	int result = -ENOSYS;
+	struct device *dev = wusbhc->dev;
+	dev_err(dev, "%s() not implemented yet\n", __func__);
+	return result;
+
+	BUG_ON(wusbhc->wuie_host_info == NULL);
+	__wusbhc_host_disconnect_ie(wusbhc);
+	wusbhc->wuie_host_info->CHID = *chid;
+	result = wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->wuie_host_info->hdr);
+	if (result < 0)
+		dev_err(dev, "Can't update Host Info WUSB IE: %d\n", result);
+	return result;
+}
+
+/*
+ * Set/reset/update a new CHID
+ *
+ * Depending on the previous state of the MMCs, start, stop or change
+ * the sent MMC. This effectively switches the host controller on and
+ * off (radio wise).
+ */
+int wusbhc_chid_set(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid)
+{
+	int result = 0;
+
+	if (memcmp(chid, &wusb_ckhdid_zero, sizeof(chid)) == 0)
+		chid = NULL;
+
+	mutex_lock(&wusbhc->mutex);
+	if (wusbhc->active) {
+		if (chid)
+			result = __wusbhc_chid_change(wusbhc, chid);
+		else
+			wusbhc_stop(wusbhc);
+	} else {
+		if (chid)
+			wusbhc_start(wusbhc, chid);
+	}
+	mutex_unlock(&wusbhc->mutex);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wusbhc_chid_set);
diff --git a/drivers/usb/wusbcore/pal.c b/drivers/usb/wusbcore/pal.c
new file mode 100644
index 0000000..7cc51e9
--- /dev/null
+++ b/drivers/usb/wusbcore/pal.c
@@ -0,0 +1,42 @@
+/*
+ * Wireless USB Host Controller
+ * UWB Protocol Adaptation Layer (PAL) glue.
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "wusbhc.h"
+
+/**
+ * wusbhc_pal_register - register the WUSB HC as a UWB PAL
+ * @wusbhc: the WUSB HC
+ */
+int wusbhc_pal_register(struct wusbhc *wusbhc)
+{
+	uwb_pal_init(&wusbhc->pal);
+
+	wusbhc->pal.name   = "wusbhc";
+	wusbhc->pal.device = wusbhc->usb_hcd.self.controller;
+
+	return uwb_pal_register(wusbhc->uwb_rc, &wusbhc->pal);
+}
+
+/**
+ * wusbhc_pal_register - unregister the WUSB HC as a UWB PAL
+ * @wusbhc: the WUSB HC
+ */
+void wusbhc_pal_unregister(struct wusbhc *wusbhc)
+{
+	uwb_pal_unregister(wusbhc->uwb_rc, &wusbhc->pal);
+}
diff --git a/drivers/usb/wusbcore/reservation.c b/drivers/usb/wusbcore/reservation.c
new file mode 100644
index 0000000..fc63e77
--- /dev/null
+++ b/drivers/usb/wusbcore/reservation.c
@@ -0,0 +1,115 @@
+/*
+ * WUSB cluster reservation management
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/uwb.h>
+
+#include "wusbhc.h"
+
+/*
+ * WUSB cluster reservations are multicast reservations with the
+ * broadcast cluster ID (BCID) as the target DevAddr.
+ *
+ * FIXME: consider adjusting the reservation depending on what devices
+ * are attached.
+ */
+
+static int wusbhc_bwa_set(struct wusbhc *wusbhc, u8 stream,
+	const struct uwb_mas_bm *mas)
+{
+	if (mas == NULL)
+		mas = &uwb_mas_bm_zero;
+	return wusbhc->bwa_set(wusbhc, stream, mas);
+}
+
+/**
+ * wusbhc_rsv_complete_cb - WUSB HC reservation complete callback
+ * @rsv:    the reservation
+ *
+ * Either set or clear the HC's view of the reservation.
+ *
+ * FIXME: when a reservation is denied the HC should be stopped.
+ */
+static void wusbhc_rsv_complete_cb(struct uwb_rsv *rsv)
+{
+	struct wusbhc *wusbhc = rsv->pal_priv;
+	struct device *dev = wusbhc->dev;
+	char buf[72];
+
+	switch (rsv->state) {
+	case UWB_RSV_STATE_O_ESTABLISHED:
+		bitmap_scnprintf(buf, sizeof(buf), rsv->mas.bm, UWB_NUM_MAS);
+		dev_dbg(dev, "established reservation: %s\n", buf);
+		wusbhc_bwa_set(wusbhc, rsv->stream, &rsv->mas);
+		break;
+	case UWB_RSV_STATE_NONE:
+		dev_dbg(dev, "removed reservation\n");
+		wusbhc_bwa_set(wusbhc, 0, NULL);
+		wusbhc->rsv = NULL;
+		break;
+	default:
+		dev_dbg(dev, "unexpected reservation state: %d\n", rsv->state);
+		break;
+	}
+}
+
+
+/**
+ * wusbhc_rsv_establish - establish a reservation for the cluster
+ * @wusbhc: the WUSB HC requesting a bandwith reservation
+ */
+int wusbhc_rsv_establish(struct wusbhc *wusbhc)
+{
+	struct uwb_rc *rc = wusbhc->uwb_rc;
+	struct uwb_rsv *rsv;
+	struct uwb_dev_addr bcid;
+	int ret;
+
+	rsv = uwb_rsv_create(rc, wusbhc_rsv_complete_cb, wusbhc);
+	if (rsv == NULL)
+		return -ENOMEM;
+
+	bcid.data[0] = wusbhc->cluster_id;
+	bcid.data[1] = 0;
+
+	rsv->owner = &rc->uwb_dev;
+	rsv->target.type = UWB_RSV_TARGET_DEVADDR;
+	rsv->target.devaddr = bcid;
+	rsv->type = UWB_DRP_TYPE_PRIVATE;
+	rsv->max_mas = 256;
+	rsv->min_mas = 16;  /* one MAS per zone? */
+	rsv->sparsity = 16; /* at least one MAS in each zone? */
+	rsv->is_multicast = true;
+
+	ret = uwb_rsv_establish(rsv);
+	if (ret == 0)
+		wusbhc->rsv = rsv;
+	else
+		uwb_rsv_destroy(rsv);
+	return ret;
+}
+
+
+/**
+ * wusbhc_rsv_terminate - terminate any cluster reservation
+ * @wusbhc: the WUSB host whose reservation is to be terminated
+ */
+void wusbhc_rsv_terminate(struct wusbhc *wusbhc)
+{
+	if (wusbhc->rsv)
+		uwb_rsv_terminate(wusbhc->rsv);
+}
diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c
new file mode 100644
index 0000000..267a643
--- /dev/null
+++ b/drivers/usb/wusbcore/rh.c
@@ -0,0 +1,477 @@
+/*
+ * Wireless USB Host Controller
+ * Root Hub operations
+ *
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * We fake a root hub that has fake ports (as many as simultaneous
+ * devices the Wireless USB Host Controller can deal with). For each
+ * port we keep an state in @wusbhc->port[index] identical to the one
+ * specified in the USB2.0[ch11] spec and some extra device
+ * information that complements the one in 'struct usb_device' (as
+ * this lacs a hcpriv pointer).
+ *
+ * Note this is common to WHCI and HWA host controllers.
+ *
+ * Through here we enable most of the state changes that the USB stack
+ * will use to connect or disconnect devices. We need to do some
+ * forced adaptation of Wireless USB device states vs. wired:
+ *
+ *        USB:                 WUSB:
+ *
+ * Port   Powered-off          port slot n/a
+ *        Powered-on           port slot available
+ *        Disconnected         port slot available
+ *        Connected            port slot assigned device
+ *        		       device sent DN_Connect
+ *                             device was authenticated
+ *        Enabled              device is authenticated, transitioned
+ *                             from unauth -> auth -> default address
+ *                             -> enabled
+ *        Reset                disconnect
+ *        Disable              disconnect
+ *
+ * This maps the standard USB port states with the WUSB device states
+ * so we can fake ports without having to modify the USB stack.
+ *
+ * FIXME: this process will change in the future
+ *
+ *
+ * ENTRY POINTS
+ *
+ * Our entry points into here are, as in hcd.c, the USB stack root hub
+ * ops defined in the usb_hcd struct:
+ *
+ * wusbhc_rh_status_data()	Provide hub and port status data bitmap
+ *
+ * wusbhc_rh_control()          Execution of all the major requests
+ *                              you can do to a hub (Set|Clear
+ *                              features, get descriptors, status, etc).
+ *
+ * wusbhc_rh_[suspend|resume]() That
+ *
+ * wusbhc_rh_start_port_reset() ??? unimplemented
+ */
+#include "wusbhc.h"
+
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+/*
+ * Reset a fake port
+ *
+ * This can be called to reset a port from any other state or to reset
+ * it when connecting. In Wireless USB they are different; when doing
+ * a new connect that involves going over the authentication. When
+ * just reseting, its a different story.
+ *
+ * The Linux USB stack resets a port twice before it considers it
+ * enabled, so we have to detect and ignore that.
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ *
+ * Supposedly we are the only thread accesing @wusbhc->port; in any
+ * case, maybe we should move the mutex locking from
+ * wusbhc_devconnect_auth() to here.
+ *
+ * @port_idx refers to the wusbhc's port index, not the USB port number
+ */
+static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx)
+{
+	int result = 0;
+	struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx);
+
+	d_fnstart(3, wusbhc->dev, "(wusbhc %p port_idx %u)\n",
+		  wusbhc, port_idx);
+	if (port->reset_count == 0) {
+		wusbhc_devconnect_auth(wusbhc, port_idx);
+		port->reset_count++;
+	} else if (port->reset_count == 1)
+		/* see header */
+		d_printf(2, wusbhc->dev, "Ignoring second reset on port_idx "
+			"%u\n", port_idx);
+	else
+		result = wusbhc_dev_reset(wusbhc, port_idx);
+	d_fnend(3, wusbhc->dev, "(wusbhc %p port_idx %u) = %d\n",
+		wusbhc, port_idx, result);
+	return result;
+}
+
+/*
+ * Return the hub change status bitmap
+ *
+ * The bits in the change status bitmap are cleared when a
+ * ClearPortFeature request is issued (USB2.0[11.12.3,11.12.4].
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ *
+ * WARNING!! This gets called from atomic context; we cannot get the
+ *           mutex--the only race condition we can find is some bit
+ *           changing just after we copy it, which shouldn't be too
+ *           big of a problem [and we can't make it an spinlock
+ *           because other parts need to take it and sleep] .
+ *
+ *           @usb_hcd is refcounted, so it won't dissapear under us
+ *           and before killing a host, the polling of the root hub
+ *           would be stopped anyway.
+ */
+int wusbhc_rh_status_data(struct usb_hcd *usb_hcd, char *_buf)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	size_t cnt, size;
+	unsigned long *buf = (unsigned long *) _buf;
+
+	d_fnstart(1, wusbhc->dev, "(wusbhc %p)\n", wusbhc);
+	/* WE DON'T LOCK, see comment */
+	size = wusbhc->ports_max + 1 /* hub bit */;
+	size = (size + 8 - 1) / 8;	/* round to bytes */
+	for (cnt = 0; cnt < wusbhc->ports_max; cnt++)
+		if (wusb_port_by_idx(wusbhc, cnt)->change)
+			set_bit(cnt + 1, buf);
+		else
+			clear_bit(cnt + 1, buf);
+	d_fnend(1, wusbhc->dev, "(wusbhc %p) %u, buffer:\n", wusbhc, (int)size);
+	d_dump(1, wusbhc->dev, _buf, size);
+	return size;
+}
+EXPORT_SYMBOL_GPL(wusbhc_rh_status_data);
+
+/*
+ * Return the hub's desciptor
+ *
+ * NOTE: almost cut and paste from ehci-hub.c
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked
+ */
+static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue,
+				   u16 wIndex,
+				   struct usb_hub_descriptor *descr,
+				   u16 wLength)
+{
+	u16 temp = 1 + (wusbhc->ports_max / 8);
+	u8 length = 7 + 2 * temp;
+
+	if (wLength < length)
+		return -ENOSPC;
+	descr->bDescLength = 7 + 2 * temp;
+	descr->bDescriptorType = 0x29;	/* HUB type */
+	descr->bNbrPorts = wusbhc->ports_max;
+	descr->wHubCharacteristics = cpu_to_le16(
+		0x00			/* All ports power at once */
+		| 0x00			/* not part of compound device */
+		| 0x10			/* No overcurrent protection */
+		| 0x00			/* 8 FS think time FIXME ?? */
+		| 0x00);		/* No port indicators */
+	descr->bPwrOn2PwrGood = 0;
+	descr->bHubContrCurrent = 0;
+	/* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+	memset(&descr->bitmap[0], 0, temp);
+	memset(&descr->bitmap[temp], 0xff, temp);
+	return 0;
+}
+
+/*
+ * Clear a hub feature
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ *
+ * Nothing to do, so no locking needed ;)
+ */
+static int wusbhc_rh_clear_hub_feat(struct wusbhc *wusbhc, u16 feature)
+{
+	int result;
+	struct device *dev = wusbhc->dev;
+
+	d_fnstart(4, dev, "(%p, feature 0x%04u)\n", wusbhc, feature);
+	switch (feature) {
+	case C_HUB_LOCAL_POWER:
+		/* FIXME: maybe plug bit 0 to the power input status,
+		 * if any?
+		 * see wusbhc_rh_get_hub_status() */
+	case C_HUB_OVER_CURRENT:
+		result = 0;
+		break;
+	default:
+		result = -EPIPE;
+	}
+	d_fnend(4, dev, "(%p, feature 0x%04u), %d\n", wusbhc, feature, result);
+	return result;
+}
+
+/*
+ * Return hub status (it is always zero...)
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ *
+ * Nothing to do, so no locking needed ;)
+ */
+static int wusbhc_rh_get_hub_status(struct wusbhc *wusbhc, u32 *buf,
+				    u16 wLength)
+{
+	/* FIXME: maybe plug bit 0 to the power input status (if any)? */
+	*buf = 0;
+	return 0;
+}
+
+/*
+ * Set a port feature
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ */
+static int wusbhc_rh_set_port_feat(struct wusbhc *wusbhc, u16 feature,
+				   u8 selector, u8 port_idx)
+{
+	int result = -EINVAL;
+	struct device *dev = wusbhc->dev;
+
+	d_fnstart(4, dev, "(feat 0x%04u, selector 0x%u, port_idx %d)\n",
+		  feature, selector, port_idx);
+
+	if (port_idx > wusbhc->ports_max)
+		goto error;
+
+	switch (feature) {
+		/* According to USB2.0[11.24.2.13]p2, these features
+		 * are not required to be implemented. */
+	case USB_PORT_FEAT_C_OVER_CURRENT:
+	case USB_PORT_FEAT_C_ENABLE:
+	case USB_PORT_FEAT_C_SUSPEND:
+	case USB_PORT_FEAT_C_CONNECTION:
+	case USB_PORT_FEAT_C_RESET:
+		result = 0;
+		break;
+
+	case USB_PORT_FEAT_POWER:
+		/* No such thing, but we fake it works */
+		mutex_lock(&wusbhc->mutex);
+		wusb_port_by_idx(wusbhc, port_idx)->status |= USB_PORT_STAT_POWER;
+		mutex_unlock(&wusbhc->mutex);
+		result = 0;
+		break;
+	case USB_PORT_FEAT_RESET:
+		result = wusbhc_rh_port_reset(wusbhc, port_idx);
+		break;
+	case USB_PORT_FEAT_ENABLE:
+	case USB_PORT_FEAT_SUSPEND:
+		dev_err(dev, "(port_idx %d) set feat %d/%d UNIMPLEMENTED\n",
+			port_idx, feature, selector);
+		result = -ENOSYS;
+		break;
+	default:
+		dev_err(dev, "(port_idx %d) set feat %d/%d UNKNOWN\n",
+			port_idx, feature, selector);
+		result = -EPIPE;
+		break;
+	}
+error:
+	d_fnend(4, dev, "(feat 0x%04u, selector 0x%u, port_idx %d) = %d\n",
+		feature, selector, port_idx, result);
+	return result;
+}
+
+/*
+ * Clear a port feature...
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ */
+static int wusbhc_rh_clear_port_feat(struct wusbhc *wusbhc, u16 feature,
+				     u8 selector, u8 port_idx)
+{
+	int result = -EINVAL;
+	struct device *dev = wusbhc->dev;
+
+	d_fnstart(4, dev, "(wusbhc %p feat 0x%04x selector %d port_idx %d)\n",
+		  wusbhc, feature, selector, port_idx);
+
+	if (port_idx > wusbhc->ports_max)
+		goto error;
+
+	mutex_lock(&wusbhc->mutex);
+	result = 0;
+	switch (feature) {
+	case USB_PORT_FEAT_POWER:	/* fake port always on */
+		/* According to USB2.0[11.24.2.7.1.4], no need to implement? */
+	case USB_PORT_FEAT_C_OVER_CURRENT:
+		break;
+	case USB_PORT_FEAT_C_RESET:
+		wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_RESET;
+		break;
+	case USB_PORT_FEAT_C_CONNECTION:
+		wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_CONNECTION;
+		break;
+	case USB_PORT_FEAT_ENABLE:
+		__wusbhc_dev_disable(wusbhc, port_idx);
+		break;
+	case USB_PORT_FEAT_C_ENABLE:
+		wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_ENABLE;
+		break;
+	case USB_PORT_FEAT_SUSPEND:
+	case USB_PORT_FEAT_C_SUSPEND:
+	case 0xffff:		/* ??? FIXME */
+		dev_err(dev, "(port_idx %d) Clear feat %d/%d UNIMPLEMENTED\n",
+			port_idx, feature, selector);
+		/* dump_stack(); */
+		result = -ENOSYS;
+		break;
+	default:
+		dev_err(dev, "(port_idx %d) Clear feat %d/%d UNKNOWN\n",
+			port_idx, feature, selector);
+		result = -EPIPE;
+		break;
+	}
+	mutex_unlock(&wusbhc->mutex);
+error:
+	d_fnend(4, dev, "(wusbhc %p feat 0x%04x selector %d port_idx %d) = "
+		"%d\n", wusbhc, feature, selector, port_idx, result);
+	return result;
+}
+
+/*
+ * Return the port's status
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ */
+static int wusbhc_rh_get_port_status(struct wusbhc *wusbhc, u16 port_idx,
+				     u32 *_buf, u16 wLength)
+{
+	int result = -EINVAL;
+	u16 *buf = (u16 *) _buf;
+
+	d_fnstart(1, wusbhc->dev, "(wusbhc %p port_idx %u wLength %u)\n",
+		  wusbhc, port_idx, wLength);
+	if (port_idx > wusbhc->ports_max)
+		goto error;
+	mutex_lock(&wusbhc->mutex);
+	buf[0] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->status);
+	buf[1] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->change);
+	result = 0;
+	mutex_unlock(&wusbhc->mutex);
+error:
+	d_fnend(1, wusbhc->dev, "(wusbhc %p) = %d, buffer:\n", wusbhc, result);
+	d_dump(1, wusbhc->dev, _buf, wLength);
+	return result;
+}
+
+/*
+ * Entry point for Root Hub operations
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ */
+int wusbhc_rh_control(struct usb_hcd *usb_hcd, u16 reqntype, u16 wValue,
+		      u16 wIndex, char *buf, u16 wLength)
+{
+	int result = -ENOSYS;
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+
+	switch (reqntype) {
+	case GetHubDescriptor:
+		result = wusbhc_rh_get_hub_descr(
+			wusbhc, wValue, wIndex,
+			(struct usb_hub_descriptor *) buf, wLength);
+		break;
+	case ClearHubFeature:
+		result = wusbhc_rh_clear_hub_feat(wusbhc, wValue);
+		break;
+	case GetHubStatus:
+		result = wusbhc_rh_get_hub_status(wusbhc, (u32 *)buf, wLength);
+		break;
+
+	case SetPortFeature:
+		result = wusbhc_rh_set_port_feat(wusbhc, wValue, wIndex >> 8,
+						 (wIndex & 0xff) - 1);
+		break;
+	case ClearPortFeature:
+		result = wusbhc_rh_clear_port_feat(wusbhc, wValue, wIndex >> 8,
+						   (wIndex & 0xff) - 1);
+		break;
+	case GetPortStatus:
+		result = wusbhc_rh_get_port_status(wusbhc, wIndex - 1,
+						   (u32 *)buf, wLength);
+		break;
+
+	case SetHubFeature:
+	default:
+		dev_err(wusbhc->dev, "%s (%p [%p], %x, %x, %x, %p, %x) "
+			"UNIMPLEMENTED\n", __func__, usb_hcd, wusbhc, reqntype,
+			wValue, wIndex, buf, wLength);
+		/* dump_stack(); */
+		result = -ENOSYS;
+	}
+	return result;
+}
+EXPORT_SYMBOL_GPL(wusbhc_rh_control);
+
+int wusbhc_rh_suspend(struct usb_hcd *usb_hcd)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
+		usb_hcd, wusbhc);
+	/* dump_stack(); */
+	return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(wusbhc_rh_suspend);
+
+int wusbhc_rh_resume(struct usb_hcd *usb_hcd)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
+		usb_hcd, wusbhc);
+	/* dump_stack(); */
+	return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(wusbhc_rh_resume);
+
+int wusbhc_rh_start_port_reset(struct usb_hcd *usb_hcd, unsigned port_idx)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	dev_err(wusbhc->dev, "%s (%p [%p], port_idx %u) UNIMPLEMENTED\n",
+		__func__, usb_hcd, wusbhc, port_idx);
+	WARN_ON(1);
+	return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(wusbhc_rh_start_port_reset);
+
+static void wusb_port_init(struct wusb_port *port)
+{
+	port->status |= USB_PORT_STAT_HIGH_SPEED;
+}
+
+/*
+ * Alloc fake port specific fields and status.
+ */
+int wusbhc_rh_create(struct wusbhc *wusbhc)
+{
+	int result = -ENOMEM;
+	size_t port_size, itr;
+	port_size = wusbhc->ports_max * sizeof(wusbhc->port[0]);
+	wusbhc->port = kzalloc(port_size, GFP_KERNEL);
+	if (wusbhc->port == NULL)
+		goto error_port_alloc;
+	for (itr = 0; itr < wusbhc->ports_max; itr++)
+		wusb_port_init(&wusbhc->port[itr]);
+	result = 0;
+error_port_alloc:
+	return result;
+}
+
+void wusbhc_rh_destroy(struct wusbhc *wusbhc)
+{
+	kfree(wusbhc->port);
+}
diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c
new file mode 100644
index 0000000..a101cad
--- /dev/null
+++ b/drivers/usb/wusbcore/security.c
@@ -0,0 +1,642 @@
+/*
+ * Wireless USB Host Controller
+ * Security support: encryption enablement, etc
+ *
+ * Copyright (C) 2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+#include <linux/types.h>
+#include <linux/usb/ch9.h>
+#include <linux/random.h>
+#include "wusbhc.h"
+
+/*
+ * DEBUG & SECURITY WARNING!!!!
+ *
+ * If you enable this past 1, the debug code will weaken the
+ * cryptographic safety of the system (on purpose, for debugging).
+ *
+ * Weaken means:
+ *   we print secret keys and intermediate values all the way,
+ */
+#undef D_LOCAL
+#define D_LOCAL 2
+#include <linux/uwb/debug.h>
+
+static void wusbhc_set_gtk_callback(struct urb *urb);
+static void wusbhc_gtk_rekey_done_work(struct work_struct *work);
+
+int wusbhc_sec_create(struct wusbhc *wusbhc)
+{
+	wusbhc->gtk.descr.bLength = sizeof(wusbhc->gtk.descr) + sizeof(wusbhc->gtk.data);
+	wusbhc->gtk.descr.bDescriptorType = USB_DT_KEY;
+	wusbhc->gtk.descr.bReserved = 0;
+
+	wusbhc->gtk_index = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK,
+					   WUSB_KEY_INDEX_ORIGINATOR_HOST);
+
+	INIT_WORK(&wusbhc->gtk_rekey_done_work, wusbhc_gtk_rekey_done_work);
+
+	return 0;
+}
+
+
+/* Called when the HC is destroyed */
+void wusbhc_sec_destroy(struct wusbhc *wusbhc)
+{
+}
+
+
+/**
+ * wusbhc_next_tkid - generate a new, currently unused, TKID
+ * @wusbhc:   the WUSB host controller
+ * @wusb_dev: the device whose PTK the TKID is for
+ *            (or NULL for a TKID for a GTK)
+ *
+ * The generated TKID consist of two parts: the device's authenicated
+ * address (or 0 or a GTK); and an incrementing number.  This ensures
+ * that TKIDs cannot be shared between devices and by the time the
+ * incrementing number wraps around the older TKIDs will no longer be
+ * in use (a maximum of two keys may be active at any one time).
+ */
+static u32 wusbhc_next_tkid(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
+{
+	u32 *tkid;
+	u32 addr;
+
+	if (wusb_dev == NULL) {
+		tkid = &wusbhc->gtk_tkid;
+		addr = 0;
+	} else {
+		tkid = &wusb_port_by_idx(wusbhc, wusb_dev->port_idx)->ptk_tkid;
+		addr = wusb_dev->addr & 0x7f;
+	}
+
+	*tkid = (addr << 8) | ((*tkid + 1) & 0xff);
+
+	return *tkid;
+}
+
+static void wusbhc_generate_gtk(struct wusbhc *wusbhc)
+{
+	const size_t key_size = sizeof(wusbhc->gtk.data);
+	u32 tkid;
+
+	tkid = wusbhc_next_tkid(wusbhc, NULL);
+
+	wusbhc->gtk.descr.tTKID[0] = (tkid >>  0) & 0xff;
+	wusbhc->gtk.descr.tTKID[1] = (tkid >>  8) & 0xff;
+	wusbhc->gtk.descr.tTKID[2] = (tkid >> 16) & 0xff;
+
+	get_random_bytes(wusbhc->gtk.descr.bKeyData, key_size);
+}
+
+/**
+ * wusbhc_sec_start - start the security management process
+ * @wusbhc: the WUSB host controller
+ *
+ * Generate and set an initial GTK on the host controller.
+ *
+ * Called when the HC is started.
+ */
+int wusbhc_sec_start(struct wusbhc *wusbhc)
+{
+	const size_t key_size = sizeof(wusbhc->gtk.data);
+	int result;
+
+	wusbhc_generate_gtk(wusbhc);
+
+	result = wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid,
+				 &wusbhc->gtk.descr.bKeyData, key_size);
+	if (result < 0)
+		dev_err(wusbhc->dev, "cannot set GTK for the host: %d\n",
+			result);
+
+	return result;
+}
+
+/**
+ * wusbhc_sec_stop - stop the security management process
+ * @wusbhc: the WUSB host controller
+ *
+ * Wait for any pending GTK rekeys to stop.
+ */
+void wusbhc_sec_stop(struct wusbhc *wusbhc)
+{
+	cancel_work_sync(&wusbhc->gtk_rekey_done_work);
+}
+
+
+/** @returns encryption type name */
+const char *wusb_et_name(u8 x)
+{
+	switch (x) {
+	case USB_ENC_TYPE_UNSECURE:	return "unsecure";
+	case USB_ENC_TYPE_WIRED:	return "wired";
+	case USB_ENC_TYPE_CCM_1:	return "CCM-1";
+	case USB_ENC_TYPE_RSA_1:	return "RSA-1";
+	default: 			return "unknown";
+	}
+}
+EXPORT_SYMBOL_GPL(wusb_et_name);
+
+/*
+ * Set the device encryption method
+ *
+ * We tell the device which encryption method to use; we do this when
+ * setting up the device's security.
+ */
+static int wusb_dev_set_encryption(struct usb_device *usb_dev, int value)
+{
+	int result;
+	struct device *dev = &usb_dev->dev;
+	struct wusb_dev *wusb_dev = usb_dev->wusb_dev;
+
+	if (value) {
+		value = wusb_dev->ccm1_etd.bEncryptionValue;
+	} else {
+		/* FIXME: should be wusb_dev->etd[UNSECURE].bEncryptionValue */
+		value = 0;
+	}
+	/* Set device's */
+	result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+			USB_REQ_SET_ENCRYPTION,
+			USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+			value, 0, NULL, 0, 1000 /* FIXME: arbitrary */);
+	if (result < 0)
+		dev_err(dev, "Can't set device's WUSB encryption to "
+			"%s (value %d): %d\n",
+			wusb_et_name(wusb_dev->ccm1_etd.bEncryptionType),
+			wusb_dev->ccm1_etd.bEncryptionValue,  result);
+	return result;
+}
+
+/*
+ * Set the GTK to be used by a device.
+ *
+ * The device must be authenticated.
+ */
+static int wusb_dev_set_gtk(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
+{
+	struct usb_device *usb_dev = wusb_dev->usb_dev;
+
+	return usb_control_msg(
+		usb_dev, usb_sndctrlpipe(usb_dev, 0),
+		USB_REQ_SET_DESCRIPTOR,
+		USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+		USB_DT_KEY << 8 | wusbhc->gtk_index, 0,
+		&wusbhc->gtk.descr, wusbhc->gtk.descr.bLength,
+		1000);
+}
+
+
+/* FIXME: prototype for adding security */
+int wusb_dev_sec_add(struct wusbhc *wusbhc,
+		     struct usb_device *usb_dev, struct wusb_dev *wusb_dev)
+{
+	int result, bytes, secd_size;
+	struct device *dev = &usb_dev->dev;
+	struct usb_security_descriptor secd;
+	const struct usb_encryption_descriptor *etd, *ccm1_etd = NULL;
+	void *secd_buf;
+	const void *itr, *top;
+	char buf[64];
+
+	d_fnstart(3, dev, "(usb_dev %p, wusb_dev %p)\n", usb_dev, wusb_dev);
+	result = usb_get_descriptor(usb_dev, USB_DT_SECURITY,
+				    0, &secd, sizeof(secd));
+	if (result < sizeof(secd)) {
+		dev_err(dev, "Can't read security descriptor or "
+			"not enough data: %d\n", result);
+		goto error_secd;
+	}
+	secd_size = le16_to_cpu(secd.wTotalLength);
+	d_printf(5, dev, "got %d bytes of sec descriptor, total is %d\n",
+		 result, secd_size);
+	secd_buf = kmalloc(secd_size, GFP_KERNEL);
+	if (secd_buf == NULL) {
+		dev_err(dev, "Can't allocate space for security descriptors\n");
+		goto error_secd_alloc;
+	}
+	result = usb_get_descriptor(usb_dev, USB_DT_SECURITY,
+				    0, secd_buf, secd_size);
+	if (result < secd_size) {
+		dev_err(dev, "Can't read security descriptor or "
+			"not enough data: %d\n", result);
+		goto error_secd_all;
+	}
+	d_printf(5, dev, "got %d bytes of sec descriptors\n", result);
+	bytes = 0;
+	itr = secd_buf + sizeof(secd);
+	top = secd_buf + result;
+	while (itr < top) {
+		etd = itr;
+		if (top - itr < sizeof(*etd)) {
+			dev_err(dev, "BUG: bad device security descriptor; "
+				"not enough data (%zu vs %zu bytes left)\n",
+				top - itr, sizeof(*etd));
+			break;
+		}
+		if (etd->bLength < sizeof(*etd)) {
+			dev_err(dev, "BUG: bad device encryption descriptor; "
+				"descriptor is too short "
+				"(%u vs %zu needed)\n",
+				etd->bLength, sizeof(*etd));
+			break;
+		}
+		itr += etd->bLength;
+		bytes += snprintf(buf + bytes, sizeof(buf) - bytes,
+				  "%s (0x%02x/%02x) ",
+				  wusb_et_name(etd->bEncryptionType),
+				  etd->bEncryptionValue, etd->bAuthKeyIndex);
+		if (etd->bEncryptionType == USB_ENC_TYPE_CCM_1)
+			ccm1_etd = etd;
+	}
+	/* This code only supports CCM1 as of now. */
+	/* FIXME: user has to choose which sec mode to use?
+	 * In theory we want CCM */
+	if (ccm1_etd == NULL) {
+		dev_err(dev, "WUSB device doesn't support CCM1 encryption, "
+			"can't use!\n");
+		result = -EINVAL;
+		goto error_no_ccm1;
+	}
+	wusb_dev->ccm1_etd = *ccm1_etd;
+	dev_info(dev, "supported encryption: %s; using %s (0x%02x/%02x)\n",
+		 buf, wusb_et_name(ccm1_etd->bEncryptionType),
+		 ccm1_etd->bEncryptionValue, ccm1_etd->bAuthKeyIndex);
+	result = 0;
+	kfree(secd_buf);
+out:
+	d_fnend(3, dev, "(usb_dev %p, wusb_dev %p) = %d\n",
+		usb_dev, wusb_dev, result);
+	return result;
+
+
+error_no_ccm1:
+error_secd_all:
+	kfree(secd_buf);
+error_secd_alloc:
+error_secd:
+	goto out;
+}
+
+void wusb_dev_sec_rm(struct wusb_dev *wusb_dev)
+{
+	/* Nothing so far */
+}
+
+static void hs_printk(unsigned level, struct device *dev,
+		      struct usb_handshake *hs)
+{
+	d_printf(level, dev,
+		 "  bMessageNumber: %u\n"
+		 "  bStatus:        %u\n"
+		 "  tTKID:          %02x %02x %02x\n"
+		 "  CDID:           %02x %02x %02x %02x %02x %02x %02x %02x\n"
+		 "                  %02x %02x %02x %02x %02x %02x %02x %02x\n"
+		 "  nonce:          %02x %02x %02x %02x %02x %02x %02x %02x\n"
+		 "                  %02x %02x %02x %02x %02x %02x %02x %02x\n"
+		 "  MIC:            %02x %02x %02x %02x %02x %02x %02x %02x\n",
+		 hs->bMessageNumber, hs->bStatus,
+		 hs->tTKID[2], hs->tTKID[1], hs->tTKID[0],
+		 hs->CDID[0], hs->CDID[1], hs->CDID[2], hs->CDID[3],
+		 hs->CDID[4], hs->CDID[5], hs->CDID[6], hs->CDID[7],
+		 hs->CDID[8], hs->CDID[9], hs->CDID[10], hs->CDID[11],
+		 hs->CDID[12], hs->CDID[13], hs->CDID[14], hs->CDID[15],
+		 hs->nonce[0], hs->nonce[1], hs->nonce[2], hs->nonce[3],
+		 hs->nonce[4], hs->nonce[5], hs->nonce[6], hs->nonce[7],
+		 hs->nonce[8], hs->nonce[9], hs->nonce[10], hs->nonce[11],
+		 hs->nonce[12], hs->nonce[13], hs->nonce[14], hs->nonce[15],
+		 hs->MIC[0], hs->MIC[1], hs->MIC[2], hs->MIC[3],
+		 hs->MIC[4], hs->MIC[5], hs->MIC[6], hs->MIC[7]);
+}
+
+/**
+ * Update the address of an unauthenticated WUSB device
+ *
+ * Once we have successfully authenticated, we take it to addr0 state
+ * and then to a normal address.
+ *
+ * Before the device's address (as known by it) was usb_dev->devnum |
+ * 0x80 (unauthenticated address). With this we update it to usb_dev->devnum.
+ */
+static int wusb_dev_update_address(struct wusbhc *wusbhc,
+				   struct wusb_dev *wusb_dev)
+{
+	int result = -ENOMEM;
+	struct usb_device *usb_dev = wusb_dev->usb_dev;
+	struct device *dev = &usb_dev->dev;
+	u8 new_address = wusb_dev->addr & 0x7F;
+
+	/* Set address 0 */
+	result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+				 USB_REQ_SET_ADDRESS, 0,
+				 0, 0, NULL, 0, 1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "auth failed: can't set address 0: %d\n",
+			result);
+		goto error_addr0;
+	}
+	result = wusb_set_dev_addr(wusbhc, wusb_dev, 0);
+	if (result < 0)
+		goto error_addr0;
+	usb_ep0_reinit(usb_dev);
+
+	/* Set new (authenticated) address. */
+	result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+				 USB_REQ_SET_ADDRESS, 0,
+				 new_address, 0, NULL, 0,
+				 1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "auth failed: can't set address %u: %d\n",
+			new_address, result);
+		goto error_addr;
+	}
+	result = wusb_set_dev_addr(wusbhc, wusb_dev, new_address);
+	if (result < 0)
+		goto error_addr;
+	usb_ep0_reinit(usb_dev);
+	usb_dev->authenticated = 1;
+error_addr:
+error_addr0:
+	return result;
+}
+
+/*
+ *
+ *
+ */
+/* FIXME: split and cleanup */
+int wusb_dev_4way_handshake(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev,
+			    struct wusb_ckhdid *ck)
+{
+	int result = -ENOMEM;
+	struct usb_device *usb_dev = wusb_dev->usb_dev;
+	struct device *dev = &usb_dev->dev;
+	u32 tkid;
+	__le32 tkid_le;
+	struct usb_handshake *hs;
+	struct aes_ccm_nonce ccm_n;
+	u8 mic[8];
+	struct wusb_keydvt_in keydvt_in;
+	struct wusb_keydvt_out keydvt_out;
+
+	hs = kzalloc(3*sizeof(hs[0]), GFP_KERNEL);
+	if (hs == NULL) {
+		dev_err(dev, "can't allocate handshake data\n");
+		goto error_kzalloc;
+	}
+
+	/* We need to turn encryption before beginning the 4way
+	 * hshake (WUSB1.0[.3.2.2]) */
+	result = wusb_dev_set_encryption(usb_dev, 1);
+	if (result < 0)
+		goto error_dev_set_encryption;
+
+	tkid = wusbhc_next_tkid(wusbhc, wusb_dev);
+	tkid_le = cpu_to_le32(tkid);
+
+	hs[0].bMessageNumber = 1;
+	hs[0].bStatus = 0;
+	memcpy(hs[0].tTKID, &tkid_le, sizeof(hs[0].tTKID));
+	hs[0].bReserved = 0;
+	memcpy(hs[0].CDID, &wusb_dev->cdid, sizeof(hs[0].CDID));
+	get_random_bytes(&hs[0].nonce, sizeof(hs[0].nonce));
+	memset(hs[0].MIC, 0, sizeof(hs[0].MIC));	/* Per WUSB1.0[T7-22] */
+
+	d_printf(1, dev, "I: sending hs1:\n");
+	hs_printk(2, dev, &hs[0]);
+
+	result = usb_control_msg(
+		usb_dev, usb_sndctrlpipe(usb_dev, 0),
+		USB_REQ_SET_HANDSHAKE,
+		USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+		1, 0, &hs[0], sizeof(hs[0]), 1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "Handshake1: request failed: %d\n", result);
+		goto error_hs1;
+	}
+
+	/* Handshake 2, from the device -- need to verify fields */
+	result = usb_control_msg(
+		usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+		USB_REQ_GET_HANDSHAKE,
+		USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+		2, 0, &hs[1], sizeof(hs[1]), 1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "Handshake2: request failed: %d\n", result);
+		goto error_hs2;
+	}
+	d_printf(1, dev, "got HS2:\n");
+	hs_printk(2, dev, &hs[1]);
+
+	result = -EINVAL;
+	if (hs[1].bMessageNumber != 2) {
+		dev_err(dev, "Handshake2 failed: bad message number %u\n",
+			hs[1].bMessageNumber);
+		goto error_hs2;
+	}
+	if (hs[1].bStatus != 0) {
+		dev_err(dev, "Handshake2 failed: bad status %u\n",
+			hs[1].bStatus);
+		goto error_hs2;
+	}
+	if (memcmp(hs[0].tTKID, hs[1].tTKID, sizeof(hs[0].tTKID))) {
+		dev_err(dev, "Handshake2 failed: TKID mismatch "
+			"(#1 0x%02x%02x%02x vs #2 0x%02x%02x%02x)\n",
+			hs[0].tTKID[0], hs[0].tTKID[1], hs[0].tTKID[2],
+			hs[1].tTKID[0], hs[1].tTKID[1], hs[1].tTKID[2]);
+		goto error_hs2;
+	}
+	if (memcmp(hs[0].CDID, hs[1].CDID, sizeof(hs[0].CDID))) {
+		dev_err(dev, "Handshake2 failed: CDID mismatch\n");
+		goto error_hs2;
+	}
+
+	/* Setup the CCM nonce */
+	memset(&ccm_n.sfn, 0, sizeof(ccm_n.sfn));	/* Per WUSB1.0[6.5.2] */
+	memcpy(ccm_n.tkid, &tkid_le, sizeof(ccm_n.tkid));
+	ccm_n.src_addr = wusbhc->uwb_rc->uwb_dev.dev_addr;
+	ccm_n.dest_addr.data[0] = wusb_dev->addr;
+	ccm_n.dest_addr.data[1] = 0;
+
+	/* Derive the KCK and PTK from CK, the CCM, H and D nonces */
+	memcpy(keydvt_in.hnonce, hs[0].nonce, sizeof(keydvt_in.hnonce));
+	memcpy(keydvt_in.dnonce, hs[1].nonce, sizeof(keydvt_in.dnonce));
+	result = wusb_key_derive(&keydvt_out, ck->data, &ccm_n, &keydvt_in);
+	if (result < 0) {
+		dev_err(dev, "Handshake2 failed: cannot derive keys: %d\n",
+			result);
+		goto error_hs2;
+	}
+	d_printf(2, dev, "KCK:\n");
+	d_dump(2, dev, keydvt_out.kck, sizeof(keydvt_out.kck));
+	d_printf(2, dev, "PTK:\n");
+	d_dump(2, dev, keydvt_out.ptk, sizeof(keydvt_out.ptk));
+
+	/* Compute MIC and verify it */
+	result = wusb_oob_mic(mic, keydvt_out.kck, &ccm_n, &hs[1]);
+	if (result < 0) {
+		dev_err(dev, "Handshake2 failed: cannot compute MIC: %d\n",
+			result);
+		goto error_hs2;
+	}
+
+	d_printf(2, dev, "MIC:\n");
+	d_dump(2, dev, mic, sizeof(mic));
+	if (memcmp(hs[1].MIC, mic, sizeof(hs[1].MIC))) {
+		dev_err(dev, "Handshake2 failed: MIC mismatch\n");
+		goto error_hs2;
+	}
+
+	/* Send Handshake3 */
+	hs[2].bMessageNumber = 3;
+	hs[2].bStatus = 0;
+	memcpy(hs[2].tTKID, &tkid_le, sizeof(hs[2].tTKID));
+	hs[2].bReserved = 0;
+	memcpy(hs[2].CDID, &wusb_dev->cdid, sizeof(hs[2].CDID));
+	memcpy(hs[2].nonce, hs[0].nonce, sizeof(hs[2].nonce));
+	result = wusb_oob_mic(hs[2].MIC, keydvt_out.kck, &ccm_n, &hs[2]);
+	if (result < 0) {
+		dev_err(dev, "Handshake3 failed: cannot compute MIC: %d\n",
+			result);
+		goto error_hs2;
+	}
+
+	d_printf(1, dev, "I: sending hs3:\n");
+	hs_printk(2, dev, &hs[2]);
+
+	result = usb_control_msg(
+		usb_dev, usb_sndctrlpipe(usb_dev, 0),
+		USB_REQ_SET_HANDSHAKE,
+		USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+		3, 0, &hs[2], sizeof(hs[2]), 1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "Handshake3: request failed: %d\n", result);
+		goto error_hs3;
+	}
+
+	d_printf(1, dev, "I: turning on encryption on host for device\n");
+	d_dump(2, dev, keydvt_out.ptk, sizeof(keydvt_out.ptk));
+	result = wusbhc->set_ptk(wusbhc, wusb_dev->port_idx, tkid,
+				 keydvt_out.ptk, sizeof(keydvt_out.ptk));
+	if (result < 0)
+		goto error_wusbhc_set_ptk;
+
+	d_printf(1, dev, "I: setting a GTK\n");
+	result = wusb_dev_set_gtk(wusbhc, wusb_dev);
+	if (result < 0) {
+		dev_err(dev, "Set GTK for device: request failed: %d\n",
+			result);
+		goto error_wusbhc_set_gtk;
+	}
+
+	/* Update the device's address from unauth to auth */
+	if (usb_dev->authenticated == 0) {
+		d_printf(1, dev, "I: updating addres to auth from non-auth\n");
+		result = wusb_dev_update_address(wusbhc, wusb_dev);
+		if (result < 0)
+			goto error_dev_update_address;
+	}
+	result = 0;
+	d_printf(1, dev, "I: 4way handshke done, device authenticated\n");
+
+error_dev_update_address:
+error_wusbhc_set_gtk:
+error_wusbhc_set_ptk:
+error_hs3:
+error_hs2:
+error_hs1:
+	memset(hs, 0, 3*sizeof(hs[0]));
+	memset(&keydvt_out, 0, sizeof(keydvt_out));
+	memset(&keydvt_in, 0, sizeof(keydvt_in));
+	memset(&ccm_n, 0, sizeof(ccm_n));
+	memset(mic, 0, sizeof(mic));
+	if (result < 0) {
+		/* error path */
+		wusb_dev_set_encryption(usb_dev, 0);
+	}
+error_dev_set_encryption:
+	kfree(hs);
+error_kzalloc:
+	return result;
+}
+
+/*
+ * Once all connected and authenticated devices have received the new
+ * GTK, switch the host to using it.
+ */
+static void wusbhc_gtk_rekey_done_work(struct work_struct *work)
+{
+	struct wusbhc *wusbhc = container_of(work, struct wusbhc, gtk_rekey_done_work);
+	size_t key_size = sizeof(wusbhc->gtk.data);
+
+	mutex_lock(&wusbhc->mutex);
+
+	if (--wusbhc->pending_set_gtks == 0)
+		wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, &wusbhc->gtk.descr.bKeyData, key_size);
+
+	mutex_unlock(&wusbhc->mutex);
+}
+
+static void wusbhc_set_gtk_callback(struct urb *urb)
+{
+	struct wusbhc *wusbhc = urb->context;
+
+	queue_work(wusbd, &wusbhc->gtk_rekey_done_work);
+}
+
+/**
+ * wusbhc_gtk_rekey - generate and distribute a new GTK
+ * @wusbhc: the WUSB host controller
+ *
+ * Generate a new GTK and distribute it to all connected and
+ * authenticated devices.  When all devices have the new GTK, the host
+ * starts using it.
+ *
+ * This must be called after every device disconnect (see [WUSB]
+ * section 6.2.11.2).
+ */
+void wusbhc_gtk_rekey(struct wusbhc *wusbhc)
+{
+	static const size_t key_size = sizeof(wusbhc->gtk.data);
+	int p;
+
+	wusbhc_generate_gtk(wusbhc);
+
+	for (p = 0; p < wusbhc->ports_max; p++) {
+		struct wusb_dev *wusb_dev;
+
+		wusb_dev = wusbhc->port[p].wusb_dev;
+		if (!wusb_dev || !wusb_dev->usb_dev | !wusb_dev->usb_dev->authenticated)
+			continue;
+
+		usb_fill_control_urb(wusb_dev->set_gtk_urb, wusb_dev->usb_dev,
+				     usb_sndctrlpipe(wusb_dev->usb_dev, 0),
+				     (void *)wusb_dev->set_gtk_req,
+				     &wusbhc->gtk.descr, wusbhc->gtk.descr.bLength,
+				     wusbhc_set_gtk_callback, wusbhc);
+		if (usb_submit_urb(wusb_dev->set_gtk_urb, GFP_KERNEL) == 0)
+			wusbhc->pending_set_gtks++;
+	}
+	if (wusbhc->pending_set_gtks == 0)
+		wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, &wusbhc->gtk.descr.bKeyData, key_size);
+}
diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c
new file mode 100644
index 0000000..9d04722
--- /dev/null
+++ b/drivers/usb/wusbcore/wa-hc.c
@@ -0,0 +1,95 @@
+/*
+ * Wire Adapter Host Controller Driver
+ * Common items to HWA and DWA based HCDs
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+#include "wusbhc.h"
+#include "wa-hc.h"
+
+/**
+ * Assumes
+ *
+ * wa->usb_dev and wa->usb_iface initialized and refcounted,
+ * wa->wa_descr initialized.
+ */
+int wa_create(struct wahc *wa, struct usb_interface *iface)
+{
+	int result;
+	struct device *dev = &iface->dev;
+
+	result = wa_rpipes_create(wa);
+	if (result < 0)
+		goto error_rpipes_create;
+	/* Fill up Data Transfer EP pointers */
+	wa->dti_epd = &iface->cur_altsetting->endpoint[1].desc;
+	wa->dto_epd = &iface->cur_altsetting->endpoint[2].desc;
+	wa->xfer_result_size = le16_to_cpu(wa->dti_epd->wMaxPacketSize);
+	wa->xfer_result = kmalloc(wa->xfer_result_size, GFP_KERNEL);
+	if (wa->xfer_result == NULL)
+		goto error_xfer_result_alloc;
+	result = wa_nep_create(wa, iface);
+	if (result < 0) {
+		dev_err(dev, "WA-CDS: can't initialize notif endpoint: %d\n",
+			result);
+		goto error_nep_create;
+	}
+	return 0;
+
+error_nep_create:
+	kfree(wa->xfer_result);
+error_xfer_result_alloc:
+	wa_rpipes_destroy(wa);
+error_rpipes_create:
+	return result;
+}
+EXPORT_SYMBOL_GPL(wa_create);
+
+
+void __wa_destroy(struct wahc *wa)
+{
+	if (wa->dti_urb) {
+		usb_kill_urb(wa->dti_urb);
+		usb_put_urb(wa->dti_urb);
+		usb_kill_urb(wa->buf_in_urb);
+		usb_put_urb(wa->buf_in_urb);
+	}
+	kfree(wa->xfer_result);
+	wa_nep_destroy(wa);
+	wa_rpipes_destroy(wa);
+}
+EXPORT_SYMBOL_GPL(__wa_destroy);
+
+/**
+ * wa_reset_all - reset the WA device
+ * @wa: the WA to be reset
+ *
+ * For HWAs the radio controller and all other PALs are also reset.
+ */
+void wa_reset_all(struct wahc *wa)
+{
+	/* FIXME: assuming HWA. */
+	wusbhc_reset_all(wa->wusb);
+}
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Wireless USB Wire Adapter core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h
new file mode 100644
index 0000000..586d350
--- /dev/null
+++ b/drivers/usb/wusbcore/wa-hc.h
@@ -0,0 +1,417 @@
+/*
+ * HWA Host Controller Driver
+ * Wire Adapter Control/Data Streaming Iface (WUSB1.0[8])
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This driver implements a USB Host Controller (struct usb_hcd) for a
+ * Wireless USB Host Controller based on the Wireless USB 1.0
+ * Host-Wire-Adapter specification (in layman terms, a USB-dongle that
+ * implements a Wireless USB host).
+ *
+ * Check out the Design-overview.txt file in the source documentation
+ * for other details on the implementation.
+ *
+ * Main blocks:
+ *
+ *  driver     glue with the driver API, workqueue daemon
+ *
+ *  lc         RC instance life cycle management (create, destroy...)
+ *
+ *  hcd        glue with the USB API Host Controller Interface API.
+ *
+ *  nep        Notification EndPoint managent: collect notifications
+ *             and queue them with the workqueue daemon.
+ *
+ *             Handle notifications as coming from the NEP. Sends them
+ *             off others to their respective modules (eg: connect,
+ *             disconnect and reset go to devconnect).
+ *
+ *  rpipe      Remote Pipe management; rpipe is what we use to write
+ *             to an endpoint on a WUSB device that is connected to a
+ *             HWA RC.
+ *
+ *  xfer       Transfer managment -- this is all the code that gets a
+ *             buffer and pushes it to a device (or viceversa). *
+ *
+ * Some day a lot of this code will be shared between this driver and
+ * the drivers for DWA (xfer, rpipe).
+ *
+ * All starts at driver.c:hwahc_probe(), when one of this guys is
+ * connected. hwahc_disconnect() stops it.
+ *
+ * During operation, the main driver is devices connecting or
+ * disconnecting. They cause the HWA RC to send notifications into
+ * nep.c:hwahc_nep_cb() that will dispatch them to
+ * notif.c:wa_notif_dispatch(). From there they will fan to cause
+ * device connects, disconnects, etc.
+ *
+ * Note much of the activity is difficult to follow. For example a
+ * device connect goes to devconnect, which will cause the "fake" root
+ * hub port to show a connect and stop there. Then khubd will notice
+ * and call into the rh.c:hwahc_rc_port_reset() code to authenticate
+ * the device (and this might require user intervention) and enable
+ * the port.
+ *
+ * We also have a timer workqueue going from devconnect.c that
+ * schedules in hwahc_devconnect_create().
+ *
+ * The rest of the traffic is in the usual entry points of a USB HCD,
+ * which are hooked up in driver.c:hwahc_rc_driver, and defined in
+ * hcd.c.
+ */
+
+#ifndef __HWAHC_INTERNAL_H__
+#define __HWAHC_INTERNAL_H__
+
+#include <linux/completion.h>
+#include <linux/usb.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/uwb.h>
+#include <linux/usb/wusb.h>
+#include <linux/usb/wusb-wa.h>
+
+struct wusbhc;
+struct wahc;
+extern void wa_urb_enqueue_run(struct work_struct *ws);
+
+/**
+ * RPipe instance
+ *
+ * @descr's fields are kept in LE, as we need to send it back and
+ * forth.
+ *
+ * @wa is referenced when set
+ *
+ * @segs_available is the number of requests segments that still can
+ *                 be submitted to the controller without overloading
+ *                 it. It is initialized to descr->wRequests when
+ *                 aiming.
+ *
+ * A rpipe supports a max of descr->wRequests at the same time; before
+ * submitting seg_lock has to be taken. If segs_avail > 0, then we can
+ * submit; if not, we have to queue them.
+ */
+struct wa_rpipe {
+	struct kref refcnt;
+	struct usb_rpipe_descriptor descr;
+	struct usb_host_endpoint *ep;
+	struct wahc *wa;
+	spinlock_t seg_lock;
+	struct list_head seg_list;
+	atomic_t segs_available;
+	u8 buffer[1];	/* For reads/writes on USB */
+};
+
+
+/**
+ * Instance of a HWA Host Controller
+ *
+ * Except where a more specific lock/mutex applies or atomic, all
+ * fields protected by @mutex.
+ *
+ * @wa_descr  Can be accessed without locking because it is in
+ *            the same area where the device descriptors were
+ *            read, so it is guaranteed to exist umodified while
+ *            the device exists.
+ *
+ *            Endianess has been converted to CPU's.
+ *
+ * @nep_* can be accessed without locking as its processing is
+ *        serialized; we submit a NEP URB and it comes to
+ *        hwahc_nep_cb(), which won't issue another URB until it is
+ *        done processing it.
+ *
+ * @xfer_list:
+ *
+ *   List of active transfers to verify existence from a xfer id
+ *   gotten from the xfer result message. Can't use urb->list because
+ *   it goes by endpoint, and we don't know the endpoint at the time
+ *   when we get the xfer result message. We can't really rely on the
+ *   pointer (will have to change for 64 bits) as the xfer id is 32 bits.
+ *
+ * @xfer_delayed_list:   List of transfers that need to be started
+ *                       (with a workqueue, because they were
+ *                       submitted from an atomic context).
+ *
+ * FIXME: this needs to be layered up: a wusbhc layer (for sharing
+ *        comonalities with WHCI), a wa layer (for sharing
+ *        comonalities with DWA-RC).
+ */
+struct wahc {
+	struct usb_device *usb_dev;
+	struct usb_interface *usb_iface;
+
+	/* HC to deliver notifications */
+	union {
+		struct wusbhc *wusb;
+		struct dwahc *dwa;
+	};
+
+	const struct usb_endpoint_descriptor *dto_epd, *dti_epd;
+	const struct usb_wa_descriptor *wa_descr;
+
+	struct urb *nep_urb;		/* Notification EndPoint [lockless] */
+	struct edc nep_edc;
+	void *nep_buffer;
+	size_t nep_buffer_size;
+
+	atomic_t notifs_queued;
+
+	u16 rpipes;
+	unsigned long *rpipe_bm;	/* rpipe usage bitmap */
+	spinlock_t rpipe_bm_lock;	/* protect rpipe_bm */
+	struct mutex rpipe_mutex;	/* assigning resources to endpoints */
+
+	struct urb *dti_urb;		/* URB for reading xfer results */
+	struct urb *buf_in_urb;		/* URB for reading data in */
+	struct edc dti_edc;		/* DTI error density counter */
+	struct wa_xfer_result *xfer_result; /* real size = dti_ep maxpktsize */
+	size_t xfer_result_size;
+
+	s32 status;			/* For reading status */
+
+	struct list_head xfer_list;
+	struct list_head xfer_delayed_list;
+	spinlock_t xfer_list_lock;
+	struct work_struct xfer_work;
+	atomic_t xfer_id_count;
+};
+
+
+extern int wa_create(struct wahc *wa, struct usb_interface *iface);
+extern void __wa_destroy(struct wahc *wa);
+void wa_reset_all(struct wahc *wa);
+
+
+/* Miscellaneous constants */
+enum {
+	/** Max number of EPROTO errors we tolerate on the NEP in a
+	 * period of time */
+	HWAHC_EPROTO_MAX = 16,
+	/** Period of time for EPROTO errors (in jiffies) */
+	HWAHC_EPROTO_PERIOD = 4 * HZ,
+};
+
+
+/* Notification endpoint handling */
+extern int wa_nep_create(struct wahc *, struct usb_interface *);
+extern void wa_nep_destroy(struct wahc *);
+
+static inline int wa_nep_arm(struct wahc *wa, gfp_t gfp_mask)
+{
+	struct urb *urb = wa->nep_urb;
+	urb->transfer_buffer = wa->nep_buffer;
+	urb->transfer_buffer_length = wa->nep_buffer_size;
+	return usb_submit_urb(urb, gfp_mask);
+}
+
+static inline void wa_nep_disarm(struct wahc *wa)
+{
+	usb_kill_urb(wa->nep_urb);
+}
+
+
+/* RPipes */
+static inline void wa_rpipe_init(struct wahc *wa)
+{
+	spin_lock_init(&wa->rpipe_bm_lock);
+	mutex_init(&wa->rpipe_mutex);
+}
+
+static inline void wa_init(struct wahc *wa)
+{
+	edc_init(&wa->nep_edc);
+	atomic_set(&wa->notifs_queued, 0);
+	wa_rpipe_init(wa);
+	edc_init(&wa->dti_edc);
+	INIT_LIST_HEAD(&wa->xfer_list);
+	INIT_LIST_HEAD(&wa->xfer_delayed_list);
+	spin_lock_init(&wa->xfer_list_lock);
+	INIT_WORK(&wa->xfer_work, wa_urb_enqueue_run);
+	atomic_set(&wa->xfer_id_count, 1);
+}
+
+/**
+ * Destroy a pipe (when refcount drops to zero)
+ *
+ * Assumes it has been moved to the "QUIESCING" state.
+ */
+struct wa_xfer;
+extern void rpipe_destroy(struct kref *_rpipe);
+static inline
+void __rpipe_get(struct wa_rpipe *rpipe)
+{
+	kref_get(&rpipe->refcnt);
+}
+extern int rpipe_get_by_ep(struct wahc *, struct usb_host_endpoint *,
+			   struct urb *, gfp_t);
+static inline void rpipe_put(struct wa_rpipe *rpipe)
+{
+	kref_put(&rpipe->refcnt, rpipe_destroy);
+
+}
+extern void rpipe_ep_disable(struct wahc *, struct usb_host_endpoint *);
+extern int wa_rpipes_create(struct wahc *);
+extern void wa_rpipes_destroy(struct wahc *);
+static inline void rpipe_avail_dec(struct wa_rpipe *rpipe)
+{
+	atomic_dec(&rpipe->segs_available);
+}
+
+/**
+ * Returns true if the rpipe is ready to submit more segments.
+ */
+static inline int rpipe_avail_inc(struct wa_rpipe *rpipe)
+{
+	return atomic_inc_return(&rpipe->segs_available) > 0
+		&& !list_empty(&rpipe->seg_list);
+}
+
+
+/* Transferring data */
+extern int wa_urb_enqueue(struct wahc *, struct usb_host_endpoint *,
+			  struct urb *, gfp_t);
+extern int wa_urb_dequeue(struct wahc *, struct urb *);
+extern void wa_handle_notif_xfer(struct wahc *, struct wa_notif_hdr *);
+
+
+/* Misc
+ *
+ * FIXME: Refcounting for the actual @hwahc object is not correct; I
+ *        mean, this should be refcounting on the HCD underneath, but
+ *        it is not. In any case, the semantics for HCD refcounting
+ *        are *weird*...on refcount reaching zero it just frees
+ *        it...no RC specific function is called...unless I miss
+ *        something.
+ *
+ * FIXME: has to go away in favour of an 'struct' hcd based sollution
+ */
+static inline struct wahc *wa_get(struct wahc *wa)
+{
+	usb_get_intf(wa->usb_iface);
+	return wa;
+}
+
+static inline void wa_put(struct wahc *wa)
+{
+	usb_put_intf(wa->usb_iface);
+}
+
+
+static inline int __wa_feature(struct wahc *wa, unsigned op, u16 feature)
+{
+	return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			op ? USB_REQ_SET_FEATURE : USB_REQ_CLEAR_FEATURE,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			feature,
+			wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+			NULL, 0, 1000 /* FIXME: arbitrary */);
+}
+
+
+static inline int __wa_set_feature(struct wahc *wa, u16 feature)
+{
+	return  __wa_feature(wa, 1, feature);
+}
+
+
+static inline int __wa_clear_feature(struct wahc *wa, u16 feature)
+{
+	return __wa_feature(wa, 0, feature);
+}
+
+
+/**
+ * Return the status of a Wire Adapter
+ *
+ * @wa:		Wire Adapter instance
+ * @returns     < 0 errno code on error, or status bitmap as described
+ *              in WUSB1.0[8.3.1.6].
+ *
+ * NOTE: need malloc, some arches don't take USB from the stack
+ */
+static inline
+s32 __wa_get_status(struct wahc *wa)
+{
+	s32 result;
+	result = usb_control_msg(
+		wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0),
+		USB_REQ_GET_STATUS,
+		USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+		&wa->status, sizeof(wa->status),
+		1000 /* FIXME: arbitrary */);
+	if (result >= 0)
+		result = wa->status;
+	return result;
+}
+
+
+/**
+ * Waits until the Wire Adapter's status matches @mask/@value
+ *
+ * @wa:		Wire Adapter instance.
+ * @returns     < 0 errno code on error, otherwise status.
+ *
+ * Loop until the WAs status matches the mask and value (status & mask
+ * == value). Timeout if it doesn't happen.
+ *
+ * FIXME: is there an official specification on how long status
+ *        changes can take?
+ */
+static inline s32 __wa_wait_status(struct wahc *wa, u32 mask, u32 value)
+{
+	s32 result;
+	unsigned loops = 10;
+	do {
+		msleep(50);
+		result = __wa_get_status(wa);
+		if ((result & mask) == value)
+			break;
+		if (loops-- == 0) {
+			result = -ETIMEDOUT;
+			break;
+		}
+	} while (result >= 0);
+	return result;
+}
+
+
+/** Command @hwahc to stop, @returns 0 if ok, < 0 errno code on error */
+static inline int __wa_stop(struct wahc *wa)
+{
+	int result;
+	struct device *dev = &wa->usb_iface->dev;
+
+	result = __wa_clear_feature(wa, WA_ENABLE);
+	if (result < 0 && result != -ENODEV) {
+		dev_err(dev, "error commanding HC to stop: %d\n", result);
+		goto out;
+	}
+	result = __wa_wait_status(wa, WA_ENABLE, 0);
+	if (result < 0 && result != -ENODEV)
+		dev_err(dev, "error waiting for HC to stop: %d\n", result);
+out:
+	return 0;
+}
+
+
+#endif /* #ifndef __HWAHC_INTERNAL_H__ */
diff --git a/drivers/usb/wusbcore/wa-nep.c b/drivers/usb/wusbcore/wa-nep.c
new file mode 100644
index 0000000..3f54299
--- /dev/null
+++ b/drivers/usb/wusbcore/wa-nep.c
@@ -0,0 +1,310 @@
+/*
+ * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8])
+ * Notification EndPoint support
+ *
+ * Copyright (C) 2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This part takes care of getting the notification from the hw
+ * only and dispatching through wusbwad into
+ * wa_notif_dispatch. Handling is done there.
+ *
+ * WA notifications are limited in size; most of them are three or
+ * four bytes long, and the longest is the HWA Device Notification,
+ * which would not exceed 38 bytes (DNs are limited in payload to 32
+ * bytes plus 3 bytes header (WUSB1.0[7.6p2]), plus 3 bytes HWA
+ * header (WUSB1.0[8.5.4.2]).
+ *
+ * It is not clear if more than one Device Notification can be packed
+ * in a HWA Notification, I assume no because of the wording in
+ * WUSB1.0[8.5.4.2]. In any case, the bigger any notification could
+ * get is 256 bytes (as the bLength field is a byte).
+ *
+ * So what we do is we have this buffer and read into it; when a
+ * notification arrives we schedule work to a specific, single thread
+ * workqueue (so notifications are serialized) and copy the
+ * notification data. After scheduling the work, we rearm the read from
+ * the notification endpoint.
+ *
+ * Entry points here are:
+ *
+ * wa_nep_[create|destroy]()   To initialize/release this subsystem
+ *
+ * wa_nep_cb()                 Callback for the notification
+ *                                endpoint; when data is ready, this
+ *                                does the dispatching.
+ */
+#include <linux/workqueue.h>
+#include <linux/ctype.h>
+#include <linux/uwb/debug.h>
+#include "wa-hc.h"
+#include "wusbhc.h"
+
+/* Structure for queueing notifications to the workqueue */
+struct wa_notif_work {
+	struct work_struct work;
+	struct wahc *wa;
+	size_t size;
+	u8 data[];
+};
+
+/*
+ * Process incoming notifications from the WA's Notification EndPoint
+ * [the wuswad daemon, basically]
+ *
+ * @_nw:	Pointer to a descriptor which has the pointer to the
+ * 		@wa, the size of the buffer and the work queue
+ * 		structure (so we can free all when done).
+ * @returns     0 if ok, < 0 errno code on error.
+ *
+ * All notifications follow the same format; they need to start with a
+ * 'struct wa_notif_hdr' header, so it is easy to parse through
+ * them. We just break the buffer in individual notifications (the
+ * standard doesn't say if it can be done or is forbidden, so we are
+ * cautious) and dispatch each.
+ *
+ * So the handling layers are is:
+ *
+ *   WA specific notification (from NEP)
+ *      Device Notification Received -> wa_handle_notif_dn()
+ *        WUSB Device notification generic handling
+ *      BPST Adjustment -> wa_handle_notif_bpst_adj()
+ *      ... -> ...
+ *
+ * @wa has to be referenced
+ */
+static void wa_notif_dispatch(struct work_struct *ws)
+{
+	void *itr;
+	u8 missing = 0;
+	struct wa_notif_work *nw = container_of(ws, struct wa_notif_work, work);
+	struct wahc *wa = nw->wa;
+	struct wa_notif_hdr *notif_hdr;
+	size_t size;
+
+	struct device *dev = &wa->usb_iface->dev;
+
+#if 0
+	/* FIXME: need to check for this??? */
+	if (usb_hcd->state == HC_STATE_QUIESCING)	/* Going down? */
+		goto out;				/* screw it */
+#endif
+	atomic_dec(&wa->notifs_queued);		/* Throttling ctl */
+	dev = &wa->usb_iface->dev;
+	size = nw->size;
+	itr = nw->data;
+
+	while (size) {
+		if (size < sizeof(*notif_hdr)) {
+			missing = sizeof(*notif_hdr) - size;
+			goto exhausted_buffer;
+		}
+		notif_hdr = itr;
+		if (size < notif_hdr->bLength)
+			goto exhausted_buffer;
+		itr += notif_hdr->bLength;
+		size -= notif_hdr->bLength;
+		/* Dispatch the notification [don't use itr or size!] */
+		switch (notif_hdr->bNotifyType) {
+		case HWA_NOTIF_DN: {
+			struct hwa_notif_dn *hwa_dn;
+			hwa_dn = container_of(notif_hdr, struct hwa_notif_dn,
+					      hdr);
+			wusbhc_handle_dn(wa->wusb, hwa_dn->bSourceDeviceAddr,
+					 hwa_dn->dndata,
+					 notif_hdr->bLength - sizeof(*hwa_dn));
+			break;
+		}
+		case WA_NOTIF_TRANSFER:
+			wa_handle_notif_xfer(wa, notif_hdr);
+			break;
+		case DWA_NOTIF_RWAKE:
+		case DWA_NOTIF_PORTSTATUS:
+		case HWA_NOTIF_BPST_ADJ:
+			/* FIXME: unimplemented WA NOTIFs */
+			/* fallthru */
+		default:
+			if (printk_ratelimit()) {
+				dev_err(dev, "HWA: unknown notification 0x%x, "
+					"%zu bytes; discarding\n",
+					notif_hdr->bNotifyType,
+					(size_t)notif_hdr->bLength);
+				dump_bytes(dev, notif_hdr, 16);
+			}
+			break;
+		}
+	}
+out:
+	wa_put(wa);
+	kfree(nw);
+	return;
+
+	/* THIS SHOULD NOT HAPPEN
+	 *
+	 * Buffer exahusted with partial data remaining; just warn and
+	 * discard the data, as this should not happen.
+	 */
+exhausted_buffer:
+	if (!printk_ratelimit())
+		goto out;
+	dev_warn(dev, "HWA: device sent short notification, "
+		 "%d bytes missing; discarding %d bytes.\n",
+		 missing, (int)size);
+	dump_bytes(dev, itr, size);
+	goto out;
+}
+
+/*
+ * Deliver incoming WA notifications to the wusbwa workqueue
+ *
+ * @wa:	Pointer the Wire Adapter Controller Data Streaming
+ *              instance (part of an 'struct usb_hcd').
+ * @size:       Size of the received buffer
+ * @returns     0 if ok, < 0 errno code on error.
+ *
+ * The input buffer is @wa->nep_buffer, with @size bytes
+ * (guaranteed to fit in the allocated space,
+ * @wa->nep_buffer_size).
+ */
+static int wa_nep_queue(struct wahc *wa, size_t size)
+{
+	int result = 0;
+	struct device *dev = &wa->usb_iface->dev;
+	struct wa_notif_work *nw;
+
+	/* dev_fnstart(dev, "(wa %p, size %zu)\n", wa, size); */
+	BUG_ON(size > wa->nep_buffer_size);
+	if (size == 0)
+		goto out;
+	if (atomic_read(&wa->notifs_queued) > 200) {
+		if (printk_ratelimit())
+			dev_err(dev, "Too many notifications queued, "
+				"throttling back\n");
+		goto out;
+	}
+	nw = kzalloc(sizeof(*nw) + size, GFP_ATOMIC);
+	if (nw == NULL) {
+		if (printk_ratelimit())
+			dev_err(dev, "No memory to queue notification\n");
+		goto out;
+	}
+	INIT_WORK(&nw->work, wa_notif_dispatch);
+	nw->wa = wa_get(wa);
+	nw->size = size;
+	memcpy(nw->data, wa->nep_buffer, size);
+	atomic_inc(&wa->notifs_queued);		/* Throttling ctl */
+	queue_work(wusbd, &nw->work);
+out:
+	/* dev_fnend(dev, "(wa %p, size %zu) = result\n", wa, size, result); */
+	return result;
+}
+
+/*
+ * Callback for the notification event endpoint
+ *
+ * Check's that everything is fine and then passes the data to be
+ * queued to the workqueue.
+ */
+static void wa_nep_cb(struct urb *urb)
+{
+	int result;
+	struct wahc *wa = urb->context;
+	struct device *dev = &wa->usb_iface->dev;
+
+	switch (result = urb->status) {
+	case 0:
+		result = wa_nep_queue(wa, urb->actual_length);
+		if (result < 0)
+			dev_err(dev, "NEP: unable to process notification(s): "
+				"%d\n", result);
+		break;
+	case -ECONNRESET:	/* Not an error, but a controlled situation; */
+	case -ENOENT:		/* (we killed the URB)...so, no broadcast */
+	case -ESHUTDOWN:
+		dev_dbg(dev, "NEP: going down %d\n", urb->status);
+		goto out;
+	default:	/* On general errors, we retry unless it gets ugly */
+		if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
+			    EDC_ERROR_TIMEFRAME)) {
+			dev_err(dev, "NEP: URB max acceptable errors "
+				"exceeded, resetting device\n");
+			wa_reset_all(wa);
+			goto out;
+		}
+		dev_err(dev, "NEP: URB error %d\n", urb->status);
+	}
+	result = wa_nep_arm(wa, GFP_ATOMIC);
+	if (result < 0) {
+		dev_err(dev, "NEP: cannot submit URB: %d\n", result);
+		wa_reset_all(wa);
+	}
+out:
+	return;
+}
+
+/*
+ * Initialize @wa's notification and event's endpoint stuff
+ *
+ * This includes the allocating the read buffer, the context ID
+ * allocation bitmap, the URB and submitting the URB.
+ */
+int wa_nep_create(struct wahc *wa, struct usb_interface *iface)
+{
+	int result;
+	struct usb_endpoint_descriptor *epd;
+	struct usb_device *usb_dev = interface_to_usbdev(iface);
+	struct device *dev = &iface->dev;
+
+	edc_init(&wa->nep_edc);
+	epd = &iface->cur_altsetting->endpoint[0].desc;
+	wa->nep_buffer_size = 1024;
+	wa->nep_buffer = kmalloc(wa->nep_buffer_size, GFP_KERNEL);
+	if (wa->nep_buffer == NULL) {
+		dev_err(dev, "Unable to allocate notification's read buffer\n");
+		goto error_nep_buffer;
+	}
+	wa->nep_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (wa->nep_urb == NULL) {
+		dev_err(dev, "Unable to allocate notification URB\n");
+		goto error_urb_alloc;
+	}
+	usb_fill_int_urb(wa->nep_urb, usb_dev,
+			 usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
+			 wa->nep_buffer, wa->nep_buffer_size,
+			 wa_nep_cb, wa, epd->bInterval);
+	result = wa_nep_arm(wa, GFP_KERNEL);
+	if (result < 0) {
+		dev_err(dev, "Cannot submit notification URB: %d\n", result);
+		goto error_nep_arm;
+	}
+	return 0;
+
+error_nep_arm:
+	usb_free_urb(wa->nep_urb);
+error_urb_alloc:
+	kfree(wa->nep_buffer);
+error_nep_buffer:
+	return -ENOMEM;
+}
+
+void wa_nep_destroy(struct wahc *wa)
+{
+	wa_nep_disarm(wa);
+	usb_free_urb(wa->nep_urb);
+	kfree(wa->nep_buffer);
+}
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c
new file mode 100644
index 0000000..f18e4aa
--- /dev/null
+++ b/drivers/usb/wusbcore/wa-rpipe.c
@@ -0,0 +1,562 @@
+/*
+ * WUSB Wire Adapter
+ * rpipe management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * RPIPE
+ *
+ *   Targetted at different downstream endpoints
+ *
+ *   Descriptor: use to config the remote pipe.
+ *
+ *   The number of blocks could be dynamic (wBlocks in descriptor is
+ *   0)--need to schedule them then.
+ *
+ * Each bit in wa->rpipe_bm represents if an rpipe is being used or
+ * not. Rpipes are represented with a 'struct wa_rpipe' that is
+ * attached to the hcpriv member of a 'struct usb_host_endpoint'.
+ *
+ * When you need to xfer data to an endpoint, you get an rpipe for it
+ * with wa_ep_rpipe_get(), which gives you a reference to the rpipe
+ * and keeps a single one (the first one) with the endpoint. When you
+ * are done transferring, you drop that reference. At the end the
+ * rpipe is always allocated and bound to the endpoint. There it might
+ * be recycled when not used.
+ *
+ * Addresses:
+ *
+ *  We use a 1:1 mapping mechanism between port address (0 based
+ *  index, actually) and the address. The USB stack knows about this.
+ *
+ *  USB Stack port number    4 (1 based)
+ *  WUSB code port index     3 (0 based)
+ *  USB Addresss             5 (2 based -- 0 is for default, 1 for root hub)
+ *
+ *  Now, because we don't use the concept as default address exactly
+ *  like the (wired) USB code does, we need to kind of skip it. So we
+ *  never take addresses from the urb->pipe, but from the
+ *  urb->dev->devnum, to make sure that we always have the right
+ *  destination address.
+ */
+#include <linux/init.h>
+#include <asm/atomic.h>
+#include <linux/bitmap.h>
+#include "wusbhc.h"
+#include "wa-hc.h"
+
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+
+static int __rpipe_get_descr(struct wahc *wa,
+			     struct usb_rpipe_descriptor *descr, u16 index)
+{
+	ssize_t result;
+	struct device *dev = &wa->usb_iface->dev;
+
+	/* Get the RPIPE descriptor -- we cannot use the usb_get_descriptor()
+	 * function because the arguments are different.
+	 */
+	d_printf(1, dev, "rpipe %u: get descr\n", index);
+	result = usb_control_msg(
+		wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0),
+		USB_REQ_GET_DESCRIPTOR,
+		USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_RPIPE,
+		USB_DT_RPIPE<<8, index, descr, sizeof(*descr),
+		1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "rpipe %u: get descriptor failed: %d\n",
+			index, (int)result);
+		goto error;
+	}
+	if (result < sizeof(*descr)) {
+		dev_err(dev, "rpipe %u: got short descriptor "
+			"(%zd vs %zd bytes needed)\n",
+			index, result, sizeof(*descr));
+		result = -EINVAL;
+		goto error;
+	}
+	result = 0;
+
+error:
+	return result;
+}
+
+/*
+ *
+ * The descriptor is assumed to be properly initialized (ie: you got
+ * it through __rpipe_get_descr()).
+ */
+static int __rpipe_set_descr(struct wahc *wa,
+			     struct usb_rpipe_descriptor *descr, u16 index)
+{
+	ssize_t result;
+	struct device *dev = &wa->usb_iface->dev;
+
+	/* we cannot use the usb_get_descriptor() function because the
+	 * arguments are different.
+	 */
+	d_printf(1, dev, "rpipe %u: set descr\n", index);
+	result = usb_control_msg(
+		wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+		USB_REQ_SET_DESCRIPTOR,
+		USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE,
+		USB_DT_RPIPE<<8, index, descr, sizeof(*descr),
+		HZ / 10);
+	if (result < 0) {
+		dev_err(dev, "rpipe %u: set descriptor failed: %d\n",
+			index, (int)result);
+		goto error;
+	}
+	if (result < sizeof(*descr)) {
+		dev_err(dev, "rpipe %u: sent short descriptor "
+			"(%zd vs %zd bytes required)\n",
+			index, result, sizeof(*descr));
+		result = -EINVAL;
+		goto error;
+	}
+	result = 0;
+
+error:
+	return result;
+
+}
+
+static void rpipe_init(struct wa_rpipe *rpipe)
+{
+	kref_init(&rpipe->refcnt);
+	spin_lock_init(&rpipe->seg_lock);
+	INIT_LIST_HEAD(&rpipe->seg_list);
+}
+
+static unsigned rpipe_get_idx(struct wahc *wa, unsigned rpipe_idx)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&wa->rpipe_bm_lock, flags);
+	rpipe_idx = find_next_zero_bit(wa->rpipe_bm, wa->rpipes, rpipe_idx);
+	if (rpipe_idx < wa->rpipes)
+		set_bit(rpipe_idx, wa->rpipe_bm);
+	spin_unlock_irqrestore(&wa->rpipe_bm_lock, flags);
+
+	return rpipe_idx;
+}
+
+static void rpipe_put_idx(struct wahc *wa, unsigned rpipe_idx)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&wa->rpipe_bm_lock, flags);
+	clear_bit(rpipe_idx, wa->rpipe_bm);
+	spin_unlock_irqrestore(&wa->rpipe_bm_lock, flags);
+}
+
+void rpipe_destroy(struct kref *_rpipe)
+{
+	struct wa_rpipe *rpipe = container_of(_rpipe, struct wa_rpipe, refcnt);
+	u8 index = le16_to_cpu(rpipe->descr.wRPipeIndex);
+	d_fnstart(1, NULL, "(rpipe %p %u)\n", rpipe, index);
+	if (rpipe->ep)
+		rpipe->ep->hcpriv = NULL;
+	rpipe_put_idx(rpipe->wa, index);
+	wa_put(rpipe->wa);
+	kfree(rpipe);
+	d_fnend(1, NULL, "(rpipe %p %u)\n", rpipe, index);
+}
+EXPORT_SYMBOL_GPL(rpipe_destroy);
+
+/*
+ * Locate an idle rpipe, create an structure for it and return it
+ *
+ * @wa 	  is referenced and unlocked
+ * @crs   enum rpipe_attr, required endpoint characteristics
+ *
+ * The rpipe can be used only sequentially (not in parallel).
+ *
+ * The rpipe is moved into the "ready" state.
+ */
+static int rpipe_get_idle(struct wa_rpipe **prpipe, struct wahc *wa, u8 crs,
+			  gfp_t gfp)
+{
+	int result;
+	unsigned rpipe_idx;
+	struct wa_rpipe *rpipe;
+	struct device *dev = &wa->usb_iface->dev;
+
+	d_fnstart(3, dev, "(wa %p crs 0x%02x)\n", wa, crs);
+	rpipe = kzalloc(sizeof(*rpipe), gfp);
+	if (rpipe == NULL)
+		return -ENOMEM;
+	rpipe_init(rpipe);
+
+	/* Look for an idle pipe */
+	for (rpipe_idx = 0; rpipe_idx < wa->rpipes; rpipe_idx++) {
+		rpipe_idx = rpipe_get_idx(wa, rpipe_idx);
+		if (rpipe_idx >= wa->rpipes)	/* no more pipes :( */
+			break;
+		result =  __rpipe_get_descr(wa, &rpipe->descr, rpipe_idx);
+		if (result < 0)
+			dev_err(dev, "Can't get descriptor for rpipe %u: %d\n",
+				rpipe_idx, result);
+		else if ((rpipe->descr.bmCharacteristics & crs) != 0)
+			goto found;
+		rpipe_put_idx(wa, rpipe_idx);
+	}
+	*prpipe = NULL;
+	kfree(rpipe);
+	d_fnend(3, dev, "(wa %p crs 0x%02x) = -ENXIO\n", wa, crs);
+	return -ENXIO;
+
+found:
+	set_bit(rpipe_idx, wa->rpipe_bm);
+	rpipe->wa = wa_get(wa);
+	*prpipe = rpipe;
+	d_fnstart(3, dev, "(wa %p crs 0x%02x) = 0\n", wa, crs);
+	return 0;
+}
+
+static int __rpipe_reset(struct wahc *wa, unsigned index)
+{
+	int result;
+	struct device *dev = &wa->usb_iface->dev;
+
+	d_printf(1, dev, "rpipe %u: reset\n", index);
+	result = usb_control_msg(
+		wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+		USB_REQ_RPIPE_RESET,
+		USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE,
+		0, index, NULL, 0, 1000 /* FIXME: arbitrary */);
+	if (result < 0)
+		dev_err(dev, "rpipe %u: reset failed: %d\n",
+			index, result);
+	return result;
+}
+
+/*
+ * Fake companion descriptor for ep0
+ *
+ * See WUSB1.0[7.4.4], most of this is zero for bulk/int/ctl
+ */
+static struct usb_wireless_ep_comp_descriptor epc0 = {
+	.bLength = sizeof(epc0),
+	.bDescriptorType = USB_DT_WIRELESS_ENDPOINT_COMP,
+/*	.bMaxBurst = 1, */
+	.bMaxSequence = 31,
+};
+
+/*
+ * Look for EP companion descriptor
+ *
+ * Get there, look for Inara in the endpoint's extra descriptors
+ */
+static struct usb_wireless_ep_comp_descriptor *rpipe_epc_find(
+		struct device *dev, struct usb_host_endpoint *ep)
+{
+	void *itr;
+	size_t itr_size;
+	struct usb_descriptor_header *hdr;
+	struct usb_wireless_ep_comp_descriptor *epcd;
+
+	d_fnstart(3, dev, "(ep %p)\n", ep);
+	if (ep->desc.bEndpointAddress == 0) {
+		epcd = &epc0;
+		goto out;
+	}
+	itr = ep->extra;
+	itr_size = ep->extralen;
+	epcd = NULL;
+	while (itr_size > 0) {
+		if (itr_size < sizeof(*hdr)) {
+			dev_err(dev, "HW Bug? ep 0x%02x: extra descriptors "
+				"at offset %zu: only %zu bytes left\n",
+				ep->desc.bEndpointAddress,
+				itr - (void *) ep->extra, itr_size);
+			break;
+		}
+		hdr = itr;
+		if (hdr->bDescriptorType == USB_DT_WIRELESS_ENDPOINT_COMP) {
+			epcd = itr;
+			break;
+		}
+		if (hdr->bLength > itr_size) {
+			dev_err(dev, "HW Bug? ep 0x%02x: extra descriptor "
+				"at offset %zu (type 0x%02x) "
+				"length %d but only %zu bytes left\n",
+				ep->desc.bEndpointAddress,
+				itr - (void *) ep->extra, hdr->bDescriptorType,
+				hdr->bLength, itr_size);
+			break;
+		}
+		itr += hdr->bLength;
+		itr_size -= hdr->bDescriptorType;
+	}
+out:
+	d_fnend(3, dev, "(ep %p) = %p\n", ep, epcd);
+	return epcd;
+}
+
+/*
+ * Aim an rpipe to its device & endpoint destination
+ *
+ * Make sure we change the address to unauthenticathed if the device
+ * is WUSB and it is not authenticated.
+ */
+static int rpipe_aim(struct wa_rpipe *rpipe, struct wahc *wa,
+		     struct usb_host_endpoint *ep, struct urb *urb, gfp_t gfp)
+{
+	int result = -ENOMSG;	/* better code for lack of companion? */
+	struct device *dev = &wa->usb_iface->dev;
+	struct usb_device *usb_dev = urb->dev;
+	struct usb_wireless_ep_comp_descriptor *epcd;
+	u8 unauth;
+
+	d_fnstart(3, dev, "(rpipe %p wa %p ep %p, urb %p)\n",
+		    rpipe, wa, ep, urb);
+	epcd = rpipe_epc_find(dev, ep);
+	if (epcd == NULL) {
+		dev_err(dev, "ep 0x%02x: can't find companion descriptor\n",
+			ep->desc.bEndpointAddress);
+		goto error;
+	}
+	unauth = usb_dev->wusb && !usb_dev->authenticated ? 0x80 : 0;
+	__rpipe_reset(wa, le16_to_cpu(rpipe->descr.wRPipeIndex));
+	atomic_set(&rpipe->segs_available, le16_to_cpu(rpipe->descr.wRequests));
+	/* FIXME: block allocation system; request with queuing and timeout */
+	/* FIXME: compute so seg_size > ep->maxpktsize */
+	rpipe->descr.wBlocks = cpu_to_le16(16);		/* given */
+	/* ep0 maxpktsize is 0x200 (WUSB1.0[4.8.1]) */
+	rpipe->descr.wMaxPacketSize = cpu_to_le16(ep->desc.wMaxPacketSize);
+	rpipe->descr.bHSHubAddress = 0;			/* reserved: zero */
+	rpipe->descr.bHSHubPort = wusb_port_no_to_idx(urb->dev->portnum);
+	/* FIXME: use maximum speed as supported or recommended by device */
+	rpipe->descr.bSpeed = usb_pipeendpoint(urb->pipe) == 0 ?
+		UWB_PHY_RATE_53 : UWB_PHY_RATE_200;
+	d_printf(2, dev, "addr %u (0x%02x) rpipe #%u ep# %u speed %d\n",
+		 urb->dev->devnum, urb->dev->devnum | unauth,
+		 le16_to_cpu(rpipe->descr.wRPipeIndex),
+		 usb_pipeendpoint(urb->pipe), rpipe->descr.bSpeed);
+	/* see security.c:wusb_update_address() */
+	if (unlikely(urb->dev->devnum == 0x80))
+		rpipe->descr.bDeviceAddress = 0;
+	else
+		rpipe->descr.bDeviceAddress = urb->dev->devnum | unauth;
+	rpipe->descr.bEndpointAddress = ep->desc.bEndpointAddress;
+	/* FIXME: bDataSequence */
+	rpipe->descr.bDataSequence = 0;
+	/* FIXME: dwCurrentWindow */
+	rpipe->descr.dwCurrentWindow = cpu_to_le32(1);
+	/* FIXME: bMaxDataSequence */
+	rpipe->descr.bMaxDataSequence = epcd->bMaxSequence - 1;
+	rpipe->descr.bInterval = ep->desc.bInterval;
+	/* FIXME: bOverTheAirInterval */
+	rpipe->descr.bOverTheAirInterval = 0;	/* 0 if not isoc */
+	/* FIXME: xmit power & preamble blah blah */
+	rpipe->descr.bmAttribute = ep->desc.bmAttributes & 0x03;
+	/* rpipe->descr.bmCharacteristics RO */
+	/* FIXME: bmRetryOptions */
+	rpipe->descr.bmRetryOptions = 15;
+	/* FIXME: use for assessing link quality? */
+	rpipe->descr.wNumTransactionErrors = 0;
+	result = __rpipe_set_descr(wa, &rpipe->descr,
+				   le16_to_cpu(rpipe->descr.wRPipeIndex));
+	if (result < 0) {
+		dev_err(dev, "Cannot aim rpipe: %d\n", result);
+		goto error;
+	}
+	result = 0;
+error:
+	d_fnend(3, dev, "(rpipe %p wa %p ep %p urb %p) = %d\n",
+		  rpipe, wa, ep, urb, result);
+	return result;
+}
+
+/*
+ * Check an aimed rpipe to make sure it points to where we want
+ *
+ * We use bit 19 of the Linux USB pipe bitmap for unauth vs auth
+ * space; when it is like that, we or 0x80 to make an unauth address.
+ */
+static int rpipe_check_aim(const struct wa_rpipe *rpipe, const struct wahc *wa,
+			   const struct usb_host_endpoint *ep,
+			   const struct urb *urb, gfp_t gfp)
+{
+	int result = 0;		/* better code for lack of companion? */
+	struct device *dev = &wa->usb_iface->dev;
+	struct usb_device *usb_dev = urb->dev;
+	u8 unauth = (usb_dev->wusb && !usb_dev->authenticated) ? 0x80 : 0;
+	u8 portnum = wusb_port_no_to_idx(urb->dev->portnum);
+
+	d_fnstart(3, dev, "(rpipe %p wa %p ep %p, urb %p)\n",
+		    rpipe, wa, ep, urb);
+#define AIM_CHECK(rdf, val, text)					\
+	do {								\
+		if (rpipe->descr.rdf != (val)) {			\
+			dev_err(dev,					\
+				"rpipe aim discrepancy: " #rdf " " text "\n", \
+				rpipe->descr.rdf, (val));		\
+			result = -EINVAL;				\
+			WARN_ON(1);					\
+		}							\
+	} while (0)
+	AIM_CHECK(wMaxPacketSize, cpu_to_le16(ep->desc.wMaxPacketSize),
+		  "(%u vs %u)");
+	AIM_CHECK(bHSHubPort, portnum, "(%u vs %u)");
+	AIM_CHECK(bSpeed, usb_pipeendpoint(urb->pipe) == 0 ?
+			UWB_PHY_RATE_53 : UWB_PHY_RATE_200,
+		  "(%u vs %u)");
+	AIM_CHECK(bDeviceAddress, urb->dev->devnum | unauth, "(%u vs %u)");
+	AIM_CHECK(bEndpointAddress, ep->desc.bEndpointAddress, "(%u vs %u)");
+	AIM_CHECK(bInterval, ep->desc.bInterval, "(%u vs %u)");
+	AIM_CHECK(bmAttribute, ep->desc.bmAttributes & 0x03, "(%u vs %u)");
+#undef AIM_CHECK
+	return result;
+}
+
+#ifndef CONFIG_BUG
+#define CONFIG_BUG 0
+#endif
+
+/*
+ * Make sure there is an rpipe allocated for an endpoint
+ *
+ * If already allocated, we just refcount it; if not, we get an
+ * idle one, aim it to the right location and take it.
+ *
+ * Attaches to ep->hcpriv and rpipe->ep to ep.
+ */
+int rpipe_get_by_ep(struct wahc *wa, struct usb_host_endpoint *ep,
+		    struct urb *urb, gfp_t gfp)
+{
+	int result = 0;
+	struct device *dev = &wa->usb_iface->dev;
+	struct wa_rpipe *rpipe;
+	u8 eptype;
+
+	d_fnstart(3, dev, "(wa %p ep %p urb %p gfp 0x%08x)\n", wa, ep, urb,
+		  gfp);
+	mutex_lock(&wa->rpipe_mutex);
+	rpipe = ep->hcpriv;
+	if (rpipe != NULL) {
+		if (CONFIG_BUG == 1) {
+			result = rpipe_check_aim(rpipe, wa, ep, urb, gfp);
+			if (result < 0)
+				goto error;
+		}
+		__rpipe_get(rpipe);
+		d_printf(2, dev, "ep 0x%02x: reusing rpipe %u\n",
+			 ep->desc.bEndpointAddress,
+			 le16_to_cpu(rpipe->descr.wRPipeIndex));
+	} else {
+		/* hmm, assign idle rpipe, aim it */
+		result = -ENOBUFS;
+		eptype = ep->desc.bmAttributes & 0x03;
+		result = rpipe_get_idle(&rpipe, wa, 1 << eptype, gfp);
+		if (result < 0)
+			goto error;
+		result = rpipe_aim(rpipe, wa, ep, urb, gfp);
+		if (result < 0) {
+			rpipe_put(rpipe);
+			goto error;
+		}
+		ep->hcpriv = rpipe;
+		rpipe->ep = ep;
+		__rpipe_get(rpipe);	/* for caching into ep->hcpriv */
+		d_printf(2, dev, "ep 0x%02x: using rpipe %u\n",
+			 ep->desc.bEndpointAddress,
+			 le16_to_cpu(rpipe->descr.wRPipeIndex));
+	}
+	d_dump(4, dev, &rpipe->descr, sizeof(rpipe->descr));
+error:
+	mutex_unlock(&wa->rpipe_mutex);
+	d_fnend(3, dev, "(wa %p ep %p urb %p gfp 0x%08x)\n", wa, ep, urb, gfp);
+	return result;
+}
+
+/*
+ * Allocate the bitmap for each rpipe.
+ */
+int wa_rpipes_create(struct wahc *wa)
+{
+	wa->rpipes = wa->wa_descr->wNumRPipes;
+	wa->rpipe_bm = kzalloc(BITS_TO_LONGS(wa->rpipes)*sizeof(unsigned long),
+			       GFP_KERNEL);
+	if (wa->rpipe_bm == NULL)
+		return -ENOMEM;
+	return 0;
+}
+
+void wa_rpipes_destroy(struct wahc *wa)
+{
+	struct device *dev = &wa->usb_iface->dev;
+	d_fnstart(3, dev, "(wa %p)\n", wa);
+	if (!bitmap_empty(wa->rpipe_bm, wa->rpipes)) {
+		char buf[256];
+		WARN_ON(1);
+		bitmap_scnprintf(buf, sizeof(buf), wa->rpipe_bm, wa->rpipes);
+		dev_err(dev, "BUG: pipes not released on exit: %s\n", buf);
+	}
+	kfree(wa->rpipe_bm);
+	d_fnend(3, dev, "(wa %p)\n", wa);
+}
+
+/*
+ * Release resources allocated for an endpoint
+ *
+ * If there is an associated rpipe to this endpoint, Abort any pending
+ * transfers and put it. If the rpipe ends up being destroyed,
+ * __rpipe_destroy() will cleanup ep->hcpriv.
+ *
+ * This is called before calling hcd->stop(), so you don't need to do
+ * anything else in there.
+ */
+void rpipe_ep_disable(struct wahc *wa, struct usb_host_endpoint *ep)
+{
+	struct device *dev = &wa->usb_iface->dev;
+	struct wa_rpipe *rpipe;
+	d_fnstart(2, dev, "(wa %p ep %p)\n", wa, ep);
+	mutex_lock(&wa->rpipe_mutex);
+	rpipe = ep->hcpriv;
+	if (rpipe != NULL) {
+		unsigned rc = atomic_read(&rpipe->refcnt.refcount);
+		int result;
+		u16 index = le16_to_cpu(rpipe->descr.wRPipeIndex);
+
+		if (rc != 1)
+			d_printf(1, dev, "(wa %p ep %p) rpipe %p refcnt %u\n",
+				 wa, ep, rpipe, rc);
+
+		d_printf(1, dev, "rpipe %u: abort\n", index);
+		result = usb_control_msg(
+			wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0),
+			USB_REQ_RPIPE_ABORT,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE,
+			0, index, NULL, 0, 1000 /* FIXME: arbitrary */);
+		if (result < 0 && result != -ENODEV /* dev is gone */)
+			d_printf(1, dev, "(wa %p rpipe %u): abort failed: %d\n",
+				 wa, index, result);
+		rpipe_put(rpipe);
+	}
+	mutex_unlock(&wa->rpipe_mutex);
+	d_fnend(2, dev, "(wa %p ep %p)\n", wa, ep);
+	return;
+}
+EXPORT_SYMBOL_GPL(rpipe_ep_disable);
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
new file mode 100644
index 0000000..c038635
--- /dev/null
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -0,0 +1,1709 @@
+/*
+ * WUSB Wire Adapter
+ * Data transfer and URB enqueing
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * How transfers work: get a buffer, break it up in segments (segment
+ * size is a multiple of the maxpacket size). For each segment issue a
+ * segment request (struct wa_xfer_*), then send the data buffer if
+ * out or nothing if in (all over the DTO endpoint).
+ *
+ * For each submitted segment request, a notification will come over
+ * the NEP endpoint and a transfer result (struct xfer_result) will
+ * arrive in the DTI URB. Read it, get the xfer ID, see if there is
+ * data coming (inbound transfer), schedule a read and handle it.
+ *
+ * Sounds simple, it is a pain to implement.
+ *
+ *
+ * ENTRY POINTS
+ *
+ *   FIXME
+ *
+ * LIFE CYCLE / STATE DIAGRAM
+ *
+ *   FIXME
+ *
+ * THIS CODE IS DISGUSTING
+ *
+ *   Warned you are; it's my second try and still not happy with it.
+ *
+ * NOTES:
+ *
+ *   - No iso
+ *
+ *   - Supports DMA xfers, control, bulk and maybe interrupt
+ *
+ *   - Does not recycle unused rpipes
+ *
+ *     An rpipe is assigned to an endpoint the first time it is used,
+ *     and then it's there, assigned, until the endpoint is disabled
+ *     (destroyed [{h,d}wahc_op_ep_disable()]. The assignment of the
+ *     rpipe to the endpoint is done under the wa->rpipe_sem semaphore
+ *     (should be a mutex).
+ *
+ *     Two methods it could be done:
+ *
+ *     (a) set up a timer everytime an rpipe's use count drops to 1
+ *         (which means unused) or when a transfer ends. Reset the
+ *         timer when a xfer is queued. If the timer expires, release
+ *         the rpipe [see rpipe_ep_disable()].
+ *
+ *     (b) when looking for free rpipes to attach [rpipe_get_by_ep()],
+ *         when none are found go over the list, check their endpoint
+ *         and their activity record (if no last-xfer-done-ts in the
+ *         last x seconds) take it
+ *
+ *     However, due to the fact that we have a set of limited
+ *     resources (max-segments-at-the-same-time per xfer,
+ *     xfers-per-ripe, blocks-per-rpipe, rpipes-per-host), at the end
+ *     we are going to have to rebuild all this based on an scheduler,
+ *     to where we have a list of transactions to do and based on the
+ *     availability of the different requried components (blocks,
+ *     rpipes, segment slots, etc), we go scheduling them. Painful.
+ */
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/hash.h>
+#include "wa-hc.h"
+#include "wusbhc.h"
+
+#undef D_LOCAL
+#define D_LOCAL 0 /* 0 disabled, > 0 different levels... */
+#include <linux/uwb/debug.h>
+
+enum {
+	WA_SEGS_MAX = 255,
+};
+
+enum wa_seg_status {
+	WA_SEG_NOTREADY,
+	WA_SEG_READY,
+	WA_SEG_DELAYED,
+	WA_SEG_SUBMITTED,
+	WA_SEG_PENDING,
+	WA_SEG_DTI_PENDING,
+	WA_SEG_DONE,
+	WA_SEG_ERROR,
+	WA_SEG_ABORTED,
+};
+
+static void wa_xfer_delayed_run(struct wa_rpipe *);
+
+/*
+ * Life cycle governed by 'struct urb' (the refcount of the struct is
+ * that of the 'struct urb' and usb_free_urb() would free the whole
+ * struct).
+ */
+struct wa_seg {
+	struct urb urb;
+	struct urb *dto_urb;		/* for data output? */
+	struct list_head list_node;	/* for rpipe->req_list */
+	struct wa_xfer *xfer;		/* out xfer */
+	u8 index;			/* which segment we are */
+	enum wa_seg_status status;
+	ssize_t result;			/* bytes xfered or error */
+	struct wa_xfer_hdr xfer_hdr;
+	u8 xfer_extra[];		/* xtra space for xfer_hdr_ctl */
+};
+
+static void wa_seg_init(struct wa_seg *seg)
+{
+	/* usb_init_urb() repeats a lot of work, so we do it here */
+	kref_init(&seg->urb.kref);
+}
+
+/*
+ * Protected by xfer->lock
+ *
+ */
+struct wa_xfer {
+	struct kref refcnt;
+	struct list_head list_node;
+	spinlock_t lock;
+	u32 id;
+
+	struct wahc *wa;		/* Wire adapter we are plugged to */
+	struct usb_host_endpoint *ep;
+	struct urb *urb;		/* URB we are transfering for */
+	struct wa_seg **seg;		/* transfer segments */
+	u8 segs, segs_submitted, segs_done;
+	unsigned is_inbound:1;
+	unsigned is_dma:1;
+	size_t seg_size;
+	int result;
+
+	gfp_t gfp;			/* allocation mask */
+
+	struct wusb_dev *wusb_dev;	/* for activity timestamps */
+};
+
+static inline void wa_xfer_init(struct wa_xfer *xfer)
+{
+	kref_init(&xfer->refcnt);
+	INIT_LIST_HEAD(&xfer->list_node);
+	spin_lock_init(&xfer->lock);
+}
+
+/*
+ * Destory a transfer structure
+ *
+ * Note that the xfer->seg[index] thingies follow the URB life cycle,
+ * so we need to put them, not free them.
+ */
+static void wa_xfer_destroy(struct kref *_xfer)
+{
+	struct wa_xfer *xfer = container_of(_xfer, struct wa_xfer, refcnt);
+	if (xfer->seg) {
+		unsigned cnt;
+		for (cnt = 0; cnt < xfer->segs; cnt++) {
+			if (xfer->is_inbound)
+				usb_put_urb(xfer->seg[cnt]->dto_urb);
+			usb_put_urb(&xfer->seg[cnt]->urb);
+		}
+	}
+	kfree(xfer);
+	d_printf(2, NULL, "xfer %p destroyed\n", xfer);
+}
+
+static void wa_xfer_get(struct wa_xfer *xfer)
+{
+	kref_get(&xfer->refcnt);
+}
+
+static void wa_xfer_put(struct wa_xfer *xfer)
+{
+	d_fnstart(3, NULL, "(xfer %p) -- ref count bef put %d\n",
+		    xfer, atomic_read(&xfer->refcnt.refcount));
+	kref_put(&xfer->refcnt, wa_xfer_destroy);
+	d_fnend(3, NULL, "(xfer %p) = void\n", xfer);
+}
+
+/*
+ * xfer is referenced
+ *
+ * xfer->lock has to be unlocked
+ *
+ * We take xfer->lock for setting the result; this is a barrier
+ * against drivers/usb/core/hcd.c:unlink1() being called after we call
+ * usb_hcd_giveback_urb() and wa_urb_dequeue() trying to get a
+ * reference to the transfer.
+ */
+static void wa_xfer_giveback(struct wa_xfer *xfer)
+{
+	unsigned long flags;
+	d_fnstart(3, NULL, "(xfer %p)\n", xfer);
+	spin_lock_irqsave(&xfer->wa->xfer_list_lock, flags);
+	list_del_init(&xfer->list_node);
+	spin_unlock_irqrestore(&xfer->wa->xfer_list_lock, flags);
+	/* FIXME: segmentation broken -- kills DWA */
+	wusbhc_giveback_urb(xfer->wa->wusb, xfer->urb, xfer->result);
+	wa_put(xfer->wa);
+	wa_xfer_put(xfer);
+	d_fnend(3, NULL, "(xfer %p) = void\n", xfer);
+}
+
+/*
+ * xfer is referenced
+ *
+ * xfer->lock has to be unlocked
+ */
+static void wa_xfer_completion(struct wa_xfer *xfer)
+{
+	d_fnstart(3, NULL, "(xfer %p)\n", xfer);
+	if (xfer->wusb_dev)
+		wusb_dev_put(xfer->wusb_dev);
+	rpipe_put(xfer->ep->hcpriv);
+	wa_xfer_giveback(xfer);
+	d_fnend(3, NULL, "(xfer %p) = void\n", xfer);
+	return;
+}
+
+/*
+ * If transfer is done, wrap it up and return true
+ *
+ * xfer->lock has to be locked
+ */
+static unsigned __wa_xfer_is_done(struct wa_xfer *xfer)
+{
+	unsigned result, cnt;
+	struct wa_seg *seg;
+	struct urb *urb = xfer->urb;
+	unsigned found_short = 0;
+
+	d_fnstart(3, NULL, "(xfer %p)\n", xfer);
+	result = xfer->segs_done == xfer->segs_submitted;
+	if (result == 0)
+		goto out;
+	urb->actual_length = 0;
+	for (cnt = 0; cnt < xfer->segs; cnt++) {
+		seg = xfer->seg[cnt];
+		switch (seg->status) {
+		case WA_SEG_DONE:
+			if (found_short && seg->result > 0) {
+				if (printk_ratelimit())
+					printk(KERN_ERR "xfer %p#%u: bad short "
+					       "segments (%zu)\n", xfer, cnt,
+					       seg->result);
+				urb->status = -EINVAL;
+				goto out;
+			}
+			urb->actual_length += seg->result;
+			if (seg->result < xfer->seg_size
+			    && cnt != xfer->segs-1)
+				found_short = 1;
+			d_printf(2, NULL, "xfer %p#%u: DONE short %d "
+				 "result %zu urb->actual_length %d\n",
+				 xfer, seg->index, found_short, seg->result,
+				 urb->actual_length);
+			break;
+		case WA_SEG_ERROR:
+			xfer->result = seg->result;
+			d_printf(2, NULL, "xfer %p#%u: ERROR result %zu\n",
+				 xfer, seg->index, seg->result);
+			goto out;
+		case WA_SEG_ABORTED:
+			WARN_ON(urb->status != -ECONNRESET
+				&& urb->status != -ENOENT);
+			d_printf(2, NULL, "xfer %p#%u ABORTED: result %d\n",
+				 xfer, seg->index, urb->status);
+			xfer->result = urb->status;
+			goto out;
+		default:
+			/* if (printk_ratelimit()) */
+				printk(KERN_ERR "xfer %p#%u: "
+				       "is_done bad state %d\n",
+				       xfer, cnt, seg->status);
+			xfer->result = -EINVAL;
+			WARN_ON(1);
+			goto out;
+		}
+	}
+	xfer->result = 0;
+out:
+	d_fnend(3, NULL, "(xfer %p) = void\n", xfer);
+	return result;
+}
+
+/*
+ * Initialize a transfer's ID
+ *
+ * We need to use a sequential number; if we use the pointer or the
+ * hash of the pointer, it can repeat over sequential transfers and
+ * then it will confuse the HWA....wonder why in hell they put a 32
+ * bit handle in there then.
+ */
+static void wa_xfer_id_init(struct wa_xfer *xfer)
+{
+	xfer->id = atomic_add_return(1, &xfer->wa->xfer_id_count);
+}
+
+/*
+ * Return the xfer's ID associated with xfer
+ *
+ * Need to generate a
+ */
+static u32 wa_xfer_id(struct wa_xfer *xfer)
+{
+	return xfer->id;
+}
+
+/*
+ * Search for a transfer list ID on the HCD's URB list
+ *
+ * For 32 bit architectures, we use the pointer itself; for 64 bits, a
+ * 32-bit hash of the pointer.
+ *
+ * @returns NULL if not found.
+ */
+static struct wa_xfer *wa_xfer_get_by_id(struct wahc *wa, u32 id)
+{
+	unsigned long flags;
+	struct wa_xfer *xfer_itr;
+	spin_lock_irqsave(&wa->xfer_list_lock, flags);
+	list_for_each_entry(xfer_itr, &wa->xfer_list, list_node) {
+		if (id == xfer_itr->id) {
+			wa_xfer_get(xfer_itr);
+			goto out;
+		}
+	}
+	xfer_itr = NULL;
+out:
+	spin_unlock_irqrestore(&wa->xfer_list_lock, flags);
+	return xfer_itr;
+}
+
+struct wa_xfer_abort_buffer {
+	struct urb urb;
+	struct wa_xfer_abort cmd;
+};
+
+static void __wa_xfer_abort_cb(struct urb *urb)
+{
+	struct wa_xfer_abort_buffer *b = urb->context;
+	usb_put_urb(&b->urb);
+}
+
+/*
+ * Aborts an ongoing transaction
+ *
+ * Assumes the transfer is referenced and locked and in a submitted
+ * state (mainly that there is an endpoint/rpipe assigned).
+ *
+ * The callback (see above) does nothing but freeing up the data by
+ * putting the URB. Because the URB is allocated at the head of the
+ * struct, the whole space we allocated is kfreed.
+ *
+ * We'll get an 'aborted transaction' xfer result on DTI, that'll
+ * politely ignore because at this point the transaction has been
+ * marked as aborted already.
+ */
+static void __wa_xfer_abort(struct wa_xfer *xfer)
+{
+	int result;
+	struct device *dev = &xfer->wa->usb_iface->dev;
+	struct wa_xfer_abort_buffer *b;
+	struct wa_rpipe *rpipe = xfer->ep->hcpriv;
+
+	b = kmalloc(sizeof(*b), GFP_ATOMIC);
+	if (b == NULL)
+		goto error_kmalloc;
+	b->cmd.bLength =  sizeof(b->cmd);
+	b->cmd.bRequestType = WA_XFER_ABORT;
+	b->cmd.wRPipe = rpipe->descr.wRPipeIndex;
+	b->cmd.dwTransferID = wa_xfer_id(xfer);
+
+	usb_init_urb(&b->urb);
+	usb_fill_bulk_urb(&b->urb, xfer->wa->usb_dev,
+		usb_sndbulkpipe(xfer->wa->usb_dev,
+				xfer->wa->dto_epd->bEndpointAddress),
+		&b->cmd, sizeof(b->cmd), __wa_xfer_abort_cb, b);
+	result = usb_submit_urb(&b->urb, GFP_ATOMIC);
+	if (result < 0)
+		goto error_submit;
+	return;				/* callback frees! */
+
+
+error_submit:
+	if (printk_ratelimit())
+		dev_err(dev, "xfer %p: Can't submit abort request: %d\n",
+			xfer, result);
+	kfree(b);
+error_kmalloc:
+	return;
+
+}
+
+/*
+ *
+ * @returns < 0 on error, transfer segment request size if ok
+ */
+static ssize_t __wa_xfer_setup_sizes(struct wa_xfer *xfer,
+				     enum wa_xfer_type *pxfer_type)
+{
+	ssize_t result;
+	struct device *dev = &xfer->wa->usb_iface->dev;
+	size_t maxpktsize;
+	struct urb *urb = xfer->urb;
+	struct wa_rpipe *rpipe = xfer->ep->hcpriv;
+
+	d_fnstart(3, dev, "(xfer %p [rpipe %p] urb %p)\n",
+		  xfer, rpipe, urb);
+	switch (rpipe->descr.bmAttribute & 0x3) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		*pxfer_type = WA_XFER_TYPE_CTL;
+		result = sizeof(struct wa_xfer_ctl);
+		break;
+	case USB_ENDPOINT_XFER_INT:
+	case USB_ENDPOINT_XFER_BULK:
+		*pxfer_type = WA_XFER_TYPE_BI;
+		result = sizeof(struct wa_xfer_bi);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		dev_err(dev, "FIXME: ISOC not implemented\n");
+		result = -ENOSYS;
+		goto error;
+	default:
+		/* never happens */
+		BUG();
+		result = -EINVAL;	/* shut gcc up */
+	};
+	xfer->is_inbound = urb->pipe & USB_DIR_IN ? 1 : 0;
+	xfer->is_dma = urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? 1 : 0;
+	xfer->seg_size = le16_to_cpu(rpipe->descr.wBlocks)
+		* 1 << (xfer->wa->wa_descr->bRPipeBlockSize - 1);
+	/* Compute the segment size and make sure it is a multiple of
+	 * the maxpktsize (WUSB1.0[8.3.3.1])...not really too much of
+	 * a check (FIXME) */
+	maxpktsize = le16_to_cpu(rpipe->descr.wMaxPacketSize);
+	if (xfer->seg_size < maxpktsize) {
+		dev_err(dev, "HW BUG? seg_size %zu smaller than maxpktsize "
+			"%zu\n", xfer->seg_size, maxpktsize);
+		result = -EINVAL;
+		goto error;
+	}
+	xfer->seg_size = (xfer->seg_size / maxpktsize) * maxpktsize;
+	xfer->segs = (urb->transfer_buffer_length + xfer->seg_size - 1)
+		/ xfer->seg_size;
+	if (xfer->segs >= WA_SEGS_MAX) {
+		dev_err(dev, "BUG? ops, number of segments %d bigger than %d\n",
+			(int)(urb->transfer_buffer_length / xfer->seg_size),
+			WA_SEGS_MAX);
+		result = -EINVAL;
+		goto error;
+	}
+	if (xfer->segs == 0 && *pxfer_type == WA_XFER_TYPE_CTL)
+		xfer->segs = 1;
+error:
+	d_fnend(3, dev, "(xfer %p [rpipe %p] urb %p) = %d\n",
+		xfer, rpipe, urb, (int)result);
+	return result;
+}
+
+/** Fill in the common request header and xfer-type specific data. */
+static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer,
+				 struct wa_xfer_hdr *xfer_hdr0,
+				 enum wa_xfer_type xfer_type,
+				 size_t xfer_hdr_size)
+{
+	struct wa_rpipe *rpipe = xfer->ep->hcpriv;
+
+	xfer_hdr0 = &xfer->seg[0]->xfer_hdr;
+	xfer_hdr0->bLength = xfer_hdr_size;
+	xfer_hdr0->bRequestType = xfer_type;
+	xfer_hdr0->wRPipe = rpipe->descr.wRPipeIndex;
+	xfer_hdr0->dwTransferID = wa_xfer_id(xfer);
+	xfer_hdr0->bTransferSegment = 0;
+	switch (xfer_type) {
+	case WA_XFER_TYPE_CTL: {
+		struct wa_xfer_ctl *xfer_ctl =
+			container_of(xfer_hdr0, struct wa_xfer_ctl, hdr);
+		xfer_ctl->bmAttribute = xfer->is_inbound ? 1 : 0;
+		BUG_ON(xfer->urb->transfer_flags & URB_NO_SETUP_DMA_MAP
+		       && xfer->urb->setup_packet == NULL);
+		memcpy(&xfer_ctl->baSetupData, xfer->urb->setup_packet,
+		       sizeof(xfer_ctl->baSetupData));
+		break;
+	}
+	case WA_XFER_TYPE_BI:
+		break;
+	case WA_XFER_TYPE_ISO:
+		printk(KERN_ERR "FIXME: ISOC not implemented\n");
+	default:
+		BUG();
+	};
+}
+
+/*
+ * Callback for the OUT data phase of the segment request
+ *
+ * Check wa_seg_cb(); most comments also apply here because this
+ * function does almost the same thing and they work closely
+ * together.
+ *
+ * If the seg request has failed but this DTO phase has suceeded,
+ * wa_seg_cb() has already failed the segment and moved the
+ * status to WA_SEG_ERROR, so this will go through 'case 0' and
+ * effectively do nothing.
+ */
+static void wa_seg_dto_cb(struct urb *urb)
+{
+	struct wa_seg *seg = urb->context;
+	struct wa_xfer *xfer = seg->xfer;
+	struct wahc *wa;
+	struct device *dev;
+	struct wa_rpipe *rpipe;
+	unsigned long flags;
+	unsigned rpipe_ready = 0;
+	u8 done = 0;
+
+	d_fnstart(3, NULL, "(urb %p [%d])\n", urb, urb->status);
+	switch (urb->status) {
+	case 0:
+		spin_lock_irqsave(&xfer->lock, flags);
+		wa = xfer->wa;
+		dev = &wa->usb_iface->dev;
+		d_printf(2, dev, "xfer %p#%u: data out done (%d bytes)\n",
+			   xfer, seg->index, urb->actual_length);
+		if (seg->status < WA_SEG_PENDING)
+			seg->status = WA_SEG_PENDING;
+		seg->result = urb->actual_length;
+		spin_unlock_irqrestore(&xfer->lock, flags);
+		break;
+	case -ECONNRESET:	/* URB unlinked; no need to do anything */
+	case -ENOENT:		/* as it was done by the who unlinked us */
+		break;
+	default:		/* Other errors ... */
+		spin_lock_irqsave(&xfer->lock, flags);
+		wa = xfer->wa;
+		dev = &wa->usb_iface->dev;
+		rpipe = xfer->ep->hcpriv;
+		if (printk_ratelimit())
+			dev_err(dev, "xfer %p#%u: data out error %d\n",
+				xfer, seg->index, urb->status);
+		if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
+			    EDC_ERROR_TIMEFRAME)){
+			dev_err(dev, "DTO: URB max acceptable errors "
+				"exceeded, resetting device\n");
+			wa_reset_all(wa);
+		}
+		if (seg->status != WA_SEG_ERROR) {
+			seg->status = WA_SEG_ERROR;
+			seg->result = urb->status;
+			xfer->segs_done++;
+			__wa_xfer_abort(xfer);
+			rpipe_ready = rpipe_avail_inc(rpipe);
+			done = __wa_xfer_is_done(xfer);
+		}
+		spin_unlock_irqrestore(&xfer->lock, flags);
+		if (done)
+			wa_xfer_completion(xfer);
+		if (rpipe_ready)
+			wa_xfer_delayed_run(rpipe);
+	}
+	d_fnend(3, NULL, "(urb %p [%d]) = void\n", urb, urb->status);
+}
+
+/*
+ * Callback for the segment request
+ *
+ * If succesful transition state (unless already transitioned or
+ * outbound transfer); otherwise, take a note of the error, mark this
+ * segment done and try completion.
+ *
+ * Note we don't access until we are sure that the transfer hasn't
+ * been cancelled (ECONNRESET, ENOENT), which could mean that
+ * seg->xfer could be already gone.
+ *
+ * We have to check before setting the status to WA_SEG_PENDING
+ * because sometimes the xfer result callback arrives before this
+ * callback (geeeeeeze), so it might happen that we are already in
+ * another state. As well, we don't set it if the transfer is inbound,
+ * as in that case, wa_seg_dto_cb will do it when the OUT data phase
+ * finishes.
+ */
+static void wa_seg_cb(struct urb *urb)
+{
+	struct wa_seg *seg = urb->context;
+	struct wa_xfer *xfer = seg->xfer;
+	struct wahc *wa;
+	struct device *dev;
+	struct wa_rpipe *rpipe;
+	unsigned long flags;
+	unsigned rpipe_ready;
+	u8 done = 0;
+
+	d_fnstart(3, NULL, "(urb %p [%d])\n", urb, urb->status);
+	switch (urb->status) {
+	case 0:
+		spin_lock_irqsave(&xfer->lock, flags);
+		wa = xfer->wa;
+		dev = &wa->usb_iface->dev;
+		d_printf(2, dev, "xfer %p#%u: request done\n",
+			   xfer, seg->index);
+		if (xfer->is_inbound && seg->status < WA_SEG_PENDING)
+			seg->status = WA_SEG_PENDING;
+		spin_unlock_irqrestore(&xfer->lock, flags);
+		break;
+	case -ECONNRESET:	/* URB unlinked; no need to do anything */
+	case -ENOENT:		/* as it was done by the who unlinked us */
+		break;
+	default:		/* Other errors ... */
+		spin_lock_irqsave(&xfer->lock, flags);
+		wa = xfer->wa;
+		dev = &wa->usb_iface->dev;
+		rpipe = xfer->ep->hcpriv;
+		if (printk_ratelimit())
+			dev_err(dev, "xfer %p#%u: request error %d\n",
+				xfer, seg->index, urb->status);
+		if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
+			    EDC_ERROR_TIMEFRAME)){
+			dev_err(dev, "DTO: URB max acceptable errors "
+				"exceeded, resetting device\n");
+			wa_reset_all(wa);
+		}
+		usb_unlink_urb(seg->dto_urb);
+		seg->status = WA_SEG_ERROR;
+		seg->result = urb->status;
+		xfer->segs_done++;
+		__wa_xfer_abort(xfer);
+		rpipe_ready = rpipe_avail_inc(rpipe);
+		done = __wa_xfer_is_done(xfer);
+		spin_unlock_irqrestore(&xfer->lock, flags);
+		if (done)
+			wa_xfer_completion(xfer);
+		if (rpipe_ready)
+			wa_xfer_delayed_run(rpipe);
+	}
+	d_fnend(3, NULL, "(urb %p [%d]) = void\n", urb, urb->status);
+}
+
+/*
+ * Allocate the segs array and initialize each of them
+ *
+ * The segments are freed by wa_xfer_destroy() when the xfer use count
+ * drops to zero; however, because each segment is given the same life
+ * cycle as the USB URB it contains, it is actually freed by
+ * usb_put_urb() on the contained USB URB (twisted, eh?).
+ */
+static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size)
+{
+	int result, cnt;
+	size_t alloc_size = sizeof(*xfer->seg[0])
+		- sizeof(xfer->seg[0]->xfer_hdr) + xfer_hdr_size;
+	struct usb_device *usb_dev = xfer->wa->usb_dev;
+	const struct usb_endpoint_descriptor *dto_epd = xfer->wa->dto_epd;
+	struct wa_seg *seg;
+	size_t buf_itr, buf_size, buf_itr_size;
+
+	result = -ENOMEM;
+	xfer->seg = kcalloc(xfer->segs, sizeof(xfer->seg[0]), GFP_ATOMIC);
+	if (xfer->seg == NULL)
+		goto error_segs_kzalloc;
+	buf_itr = 0;
+	buf_size = xfer->urb->transfer_buffer_length;
+	for (cnt = 0; cnt < xfer->segs; cnt++) {
+		seg = xfer->seg[cnt] = kzalloc(alloc_size, GFP_ATOMIC);
+		if (seg == NULL)
+			goto error_seg_kzalloc;
+		wa_seg_init(seg);
+		seg->xfer = xfer;
+		seg->index = cnt;
+		usb_fill_bulk_urb(&seg->urb, usb_dev,
+				  usb_sndbulkpipe(usb_dev,
+						  dto_epd->bEndpointAddress),
+				  &seg->xfer_hdr, xfer_hdr_size,
+				  wa_seg_cb, seg);
+		buf_itr_size = buf_size > xfer->seg_size ?
+			xfer->seg_size : buf_size;
+		if (xfer->is_inbound == 0 && buf_size > 0) {
+			seg->dto_urb = usb_alloc_urb(0, GFP_ATOMIC);
+			if (seg->dto_urb == NULL)
+				goto error_dto_alloc;
+			usb_fill_bulk_urb(
+				seg->dto_urb, usb_dev,
+				usb_sndbulkpipe(usb_dev,
+						dto_epd->bEndpointAddress),
+				NULL, 0, wa_seg_dto_cb, seg);
+			if (xfer->is_dma) {
+				seg->dto_urb->transfer_dma =
+					xfer->urb->transfer_dma + buf_itr;
+				seg->dto_urb->transfer_flags |=
+					URB_NO_TRANSFER_DMA_MAP;
+			} else
+				seg->dto_urb->transfer_buffer =
+					xfer->urb->transfer_buffer + buf_itr;
+			seg->dto_urb->transfer_buffer_length = buf_itr_size;
+		}
+		seg->status = WA_SEG_READY;
+		buf_itr += buf_itr_size;
+		buf_size -= buf_itr_size;
+	}
+	return 0;
+
+error_dto_alloc:
+	kfree(xfer->seg[cnt]);
+	cnt--;
+error_seg_kzalloc:
+	/* use the fact that cnt is left at were it failed */
+	for (; cnt > 0; cnt--) {
+		if (xfer->is_inbound == 0)
+			kfree(xfer->seg[cnt]->dto_urb);
+		kfree(xfer->seg[cnt]);
+	}
+error_segs_kzalloc:
+	return result;
+}
+
+/*
+ * Allocates all the stuff needed to submit a transfer
+ *
+ * Breaks the whole data buffer in a list of segments, each one has a
+ * structure allocated to it and linked in xfer->seg[index]
+ *
+ * FIXME: merge setup_segs() and the last part of this function, no
+ *        need to do two for loops when we could run everything in a
+ *        single one
+ */
+static int __wa_xfer_setup(struct wa_xfer *xfer, struct urb *urb)
+{
+	int result;
+	struct device *dev = &xfer->wa->usb_iface->dev;
+	enum wa_xfer_type xfer_type = 0; /* shut up GCC */
+	size_t xfer_hdr_size, cnt, transfer_size;
+	struct wa_xfer_hdr *xfer_hdr0, *xfer_hdr;
+
+	d_fnstart(3, dev, "(xfer %p [rpipe %p] urb %p)\n",
+		  xfer, xfer->ep->hcpriv, urb);
+
+	result = __wa_xfer_setup_sizes(xfer, &xfer_type);
+	if (result < 0)
+		goto error_setup_sizes;
+	xfer_hdr_size = result;
+	result = __wa_xfer_setup_segs(xfer, xfer_hdr_size);
+	if (result < 0) {
+		dev_err(dev, "xfer %p: Failed to allocate %d segments: %d\n",
+			xfer, xfer->segs, result);
+		goto error_setup_segs;
+	}
+	/* Fill the first header */
+	xfer_hdr0 = &xfer->seg[0]->xfer_hdr;
+	wa_xfer_id_init(xfer);
+	__wa_xfer_setup_hdr0(xfer, xfer_hdr0, xfer_type, xfer_hdr_size);
+
+	/* Fill remainig headers */
+	xfer_hdr = xfer_hdr0;
+	transfer_size = urb->transfer_buffer_length;
+	xfer_hdr0->dwTransferLength = transfer_size > xfer->seg_size ?
+		xfer->seg_size : transfer_size;
+	transfer_size -=  xfer->seg_size;
+	for (cnt = 1; cnt < xfer->segs; cnt++) {
+		xfer_hdr = &xfer->seg[cnt]->xfer_hdr;
+		memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size);
+		xfer_hdr->bTransferSegment = cnt;
+		xfer_hdr->dwTransferLength = transfer_size > xfer->seg_size ?
+			cpu_to_le32(xfer->seg_size)
+			: cpu_to_le32(transfer_size);
+		xfer->seg[cnt]->status = WA_SEG_READY;
+		transfer_size -=  xfer->seg_size;
+	}
+	xfer_hdr->bTransferSegment |= 0x80;	/* this is the last segment */
+	result = 0;
+error_setup_segs:
+error_setup_sizes:
+	d_fnend(3, dev, "(xfer %p [rpipe %p] urb %p) = %d\n",
+		xfer, xfer->ep->hcpriv, urb, result);
+	return result;
+}
+
+/*
+ *
+ *
+ * rpipe->seg_lock is held!
+ */
+static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer,
+			   struct wa_seg *seg)
+{
+	int result;
+	result = usb_submit_urb(&seg->urb, GFP_ATOMIC);
+	if (result < 0) {
+		printk(KERN_ERR "xfer %p#%u: REQ submit failed: %d\n",
+		       xfer, seg->index, result);
+		goto error_seg_submit;
+	}
+	if (seg->dto_urb) {
+		result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC);
+		if (result < 0) {
+			printk(KERN_ERR "xfer %p#%u: DTO submit failed: %d\n",
+			       xfer, seg->index, result);
+			goto error_dto_submit;
+		}
+	}
+	seg->status = WA_SEG_SUBMITTED;
+	rpipe_avail_dec(rpipe);
+	return 0;
+
+error_dto_submit:
+	usb_unlink_urb(&seg->urb);
+error_seg_submit:
+	seg->status = WA_SEG_ERROR;
+	seg->result = result;
+	return result;
+}
+
+/*
+ * Execute more queued request segments until the maximum concurrent allowed
+ *
+ * The ugly unlock/lock sequence on the error path is needed as the
+ * xfer->lock normally nests the seg_lock and not viceversa.
+ *
+ */
+static void wa_xfer_delayed_run(struct wa_rpipe *rpipe)
+{
+	int result;
+	struct device *dev = &rpipe->wa->usb_iface->dev;
+	struct wa_seg *seg;
+	struct wa_xfer *xfer;
+	unsigned long flags;
+
+	d_fnstart(1, dev, "(rpipe #%d) %d segments available\n",
+		  le16_to_cpu(rpipe->descr.wRPipeIndex),
+		  atomic_read(&rpipe->segs_available));
+	spin_lock_irqsave(&rpipe->seg_lock, flags);
+	while (atomic_read(&rpipe->segs_available) > 0
+	      && !list_empty(&rpipe->seg_list)) {
+		seg = list_entry(rpipe->seg_list.next, struct wa_seg,
+				 list_node);
+		list_del(&seg->list_node);
+		xfer = seg->xfer;
+		result = __wa_seg_submit(rpipe, xfer, seg);
+		d_printf(1, dev, "xfer %p#%u submitted from delayed "
+			 "[%d segments available] %d\n",
+			 xfer, seg->index,
+			 atomic_read(&rpipe->segs_available), result);
+		if (unlikely(result < 0)) {
+			spin_unlock_irqrestore(&rpipe->seg_lock, flags);
+			spin_lock_irqsave(&xfer->lock, flags);
+			__wa_xfer_abort(xfer);
+			xfer->segs_done++;
+			spin_unlock_irqrestore(&xfer->lock, flags);
+			spin_lock_irqsave(&rpipe->seg_lock, flags);
+		}
+	}
+	spin_unlock_irqrestore(&rpipe->seg_lock, flags);
+	d_fnend(1, dev, "(rpipe #%d) = void, %d segments available\n",
+		le16_to_cpu(rpipe->descr.wRPipeIndex),
+		atomic_read(&rpipe->segs_available));
+
+}
+
+/*
+ *
+ * xfer->lock is taken
+ *
+ * On failure submitting we just stop submitting and return error;
+ * wa_urb_enqueue_b() will execute the completion path
+ */
+static int __wa_xfer_submit(struct wa_xfer *xfer)
+{
+	int result;
+	struct wahc *wa = xfer->wa;
+	struct device *dev = &wa->usb_iface->dev;
+	unsigned cnt;
+	struct wa_seg *seg;
+	unsigned long flags;
+	struct wa_rpipe *rpipe = xfer->ep->hcpriv;
+	size_t maxrequests = le16_to_cpu(rpipe->descr.wRequests);
+	u8 available;
+	u8 empty;
+
+	d_fnstart(3, dev, "(xfer %p [rpipe %p])\n",
+		  xfer, xfer->ep->hcpriv);
+
+	spin_lock_irqsave(&wa->xfer_list_lock, flags);
+	list_add_tail(&xfer->list_node, &wa->xfer_list);
+	spin_unlock_irqrestore(&wa->xfer_list_lock, flags);
+
+	BUG_ON(atomic_read(&rpipe->segs_available) > maxrequests);
+	result = 0;
+	spin_lock_irqsave(&rpipe->seg_lock, flags);
+	for (cnt = 0; cnt < xfer->segs; cnt++) {
+		available = atomic_read(&rpipe->segs_available);
+		empty = list_empty(&rpipe->seg_list);
+		seg = xfer->seg[cnt];
+		d_printf(2, dev, "xfer %p#%u: available %u empty %u (%s)\n",
+			 xfer, cnt, available, empty,
+			 available == 0 || !empty ? "delayed" : "submitted");
+		if (available == 0 || !empty) {
+			d_printf(1, dev, "xfer %p#%u: delayed\n", xfer, cnt);
+			seg->status = WA_SEG_DELAYED;
+			list_add_tail(&seg->list_node, &rpipe->seg_list);
+		} else {
+			result = __wa_seg_submit(rpipe, xfer, seg);
+			if (result < 0)
+				goto error_seg_submit;
+		}
+		xfer->segs_submitted++;
+	}
+	spin_unlock_irqrestore(&rpipe->seg_lock, flags);
+	d_fnend(3, dev, "(xfer %p [rpipe %p]) = void\n", xfer,
+		xfer->ep->hcpriv);
+	return result;
+
+error_seg_submit:
+	__wa_xfer_abort(xfer);
+	spin_unlock_irqrestore(&rpipe->seg_lock, flags);
+	d_fnend(3, dev, "(xfer %p [rpipe %p]) = void\n", xfer,
+		xfer->ep->hcpriv);
+	return result;
+}
+
+/*
+ * Second part of a URB/transfer enqueuement
+ *
+ * Assumes this comes from wa_urb_enqueue() [maybe through
+ * wa_urb_enqueue_run()]. At this point:
+ *
+ * xfer->wa	filled and refcounted
+ * xfer->ep	filled with rpipe refcounted if
+ *              delayed == 0
+ * xfer->urb 	filled and refcounted (this is the case when called
+ *              from wa_urb_enqueue() as we come from usb_submit_urb()
+ *              and when called by wa_urb_enqueue_run(), as we took an
+ *              extra ref dropped by _run() after we return).
+ * xfer->gfp	filled
+ *
+ * If we fail at __wa_xfer_submit(), then we just check if we are done
+ * and if so, we run the completion procedure. However, if we are not
+ * yet done, we do nothing and wait for the completion handlers from
+ * the submitted URBs or from the xfer-result path to kick in. If xfer
+ * result never kicks in, the xfer will timeout from the USB code and
+ * dequeue() will be called.
+ */
+static void wa_urb_enqueue_b(struct wa_xfer *xfer)
+{
+	int result;
+	unsigned long flags;
+	struct urb *urb = xfer->urb;
+	struct wahc *wa = xfer->wa;
+	struct wusbhc *wusbhc = wa->wusb;
+	struct device *dev = &wa->usb_iface->dev;
+	struct wusb_dev *wusb_dev;
+	unsigned done;
+
+	d_fnstart(3, dev, "(wa %p urb %p)\n", wa, urb);
+	result = rpipe_get_by_ep(wa, xfer->ep, urb, xfer->gfp);
+	if (result < 0)
+		goto error_rpipe_get;
+	result = -ENODEV;
+	/* FIXME: segmentation broken -- kills DWA */
+	mutex_lock(&wusbhc->mutex);		/* get a WUSB dev */
+	if (urb->dev == NULL)
+		goto error_dev_gone;
+	wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
+	if (wusb_dev == NULL) {
+		mutex_unlock(&wusbhc->mutex);
+		goto error_dev_gone;
+	}
+	mutex_unlock(&wusbhc->mutex);
+
+	spin_lock_irqsave(&xfer->lock, flags);
+	xfer->wusb_dev = wusb_dev;
+	result = urb->status;
+	if (urb->status != -EINPROGRESS)
+		goto error_dequeued;
+
+	result = __wa_xfer_setup(xfer, urb);
+	if (result < 0)
+		goto error_xfer_setup;
+	result = __wa_xfer_submit(xfer);
+	if (result < 0)
+		goto error_xfer_submit;
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	d_fnend(3, dev, "(wa %p urb %p) = void\n", wa, urb);
+	return;
+
+	/* this is basically wa_xfer_completion() broken up wa_xfer_giveback()
+	 * does a wa_xfer_put() that will call wa_xfer_destroy() and clean
+	 * upundo setup().
+	 */
+error_xfer_setup:
+error_dequeued:
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	/* FIXME: segmentation broken, kills DWA */
+	if (wusb_dev)
+		wusb_dev_put(wusb_dev);
+error_dev_gone:
+	rpipe_put(xfer->ep->hcpriv);
+error_rpipe_get:
+	xfer->result = result;
+	wa_xfer_giveback(xfer);
+	d_fnend(3, dev, "(wa %p urb %p) = (void) %d\n", wa, urb, result);
+	return;
+
+error_xfer_submit:
+	done = __wa_xfer_is_done(xfer);
+	xfer->result = result;
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	if (done)
+		wa_xfer_completion(xfer);
+	d_fnend(3, dev, "(wa %p urb %p) = (void) %d\n", wa, urb, result);
+	return;
+}
+
+/*
+ * Execute the delayed transfers in the Wire Adapter @wa
+ *
+ * We need to be careful here, as dequeue() could be called in the
+ * middle.  That's why we do the whole thing under the
+ * wa->xfer_list_lock. If dequeue() jumps in, it first locks urb->lock
+ * and then checks the list -- so as we would be acquiring in inverse
+ * order, we just drop the lock once we have the xfer and reacquire it
+ * later.
+ */
+void wa_urb_enqueue_run(struct work_struct *ws)
+{
+	struct wahc *wa = container_of(ws, struct wahc, xfer_work);
+	struct device *dev = &wa->usb_iface->dev;
+	struct wa_xfer *xfer, *next;
+	struct urb *urb;
+
+	d_fnstart(3, dev, "(wa %p)\n", wa);
+	spin_lock_irq(&wa->xfer_list_lock);
+	list_for_each_entry_safe(xfer, next, &wa->xfer_delayed_list,
+				 list_node) {
+		list_del_init(&xfer->list_node);
+		spin_unlock_irq(&wa->xfer_list_lock);
+
+		urb = xfer->urb;
+		wa_urb_enqueue_b(xfer);
+		usb_put_urb(urb);	/* taken when queuing */
+
+		spin_lock_irq(&wa->xfer_list_lock);
+	}
+	spin_unlock_irq(&wa->xfer_list_lock);
+	d_fnend(3, dev, "(wa %p) = void\n", wa);
+}
+EXPORT_SYMBOL_GPL(wa_urb_enqueue_run);
+
+/*
+ * Submit a transfer to the Wire Adapter in a delayed way
+ *
+ * The process of enqueuing involves possible sleeps() [see
+ * enqueue_b(), for the rpipe_get() and the mutex_lock()]. If we are
+ * in an atomic section, we defer the enqueue_b() call--else we call direct.
+ *
+ * @urb: We own a reference to it done by the HCI Linux USB stack that
+ *       will be given up by calling usb_hcd_giveback_urb() or by
+ *       returning error from this function -> ergo we don't have to
+ *       refcount it.
+ */
+int wa_urb_enqueue(struct wahc *wa, struct usb_host_endpoint *ep,
+		   struct urb *urb, gfp_t gfp)
+{
+	int result;
+	struct device *dev = &wa->usb_iface->dev;
+	struct wa_xfer *xfer;
+	unsigned long my_flags;
+	unsigned cant_sleep = irqs_disabled() | in_atomic();
+
+	d_fnstart(3, dev, "(wa %p ep %p urb %p [%d] gfp 0x%x)\n",
+		  wa, ep, urb, urb->transfer_buffer_length, gfp);
+
+	if (urb->transfer_buffer == NULL
+	    && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
+	    && urb->transfer_buffer_length != 0) {
+		dev_err(dev, "BUG? urb %p: NULL xfer buffer & NODMA\n", urb);
+		dump_stack();
+	}
+
+	result = -ENOMEM;
+	xfer = kzalloc(sizeof(*xfer), gfp);
+	if (xfer == NULL)
+		goto error_kmalloc;
+
+	result = -ENOENT;
+	if (urb->status != -EINPROGRESS)	/* cancelled */
+		goto error_dequeued;		/* before starting? */
+	wa_xfer_init(xfer);
+	xfer->wa = wa_get(wa);
+	xfer->urb = urb;
+	xfer->gfp = gfp;
+	xfer->ep = ep;
+	urb->hcpriv = xfer;
+	d_printf(2, dev, "xfer %p urb %p pipe 0x%02x [%d bytes] %s %s %s\n",
+		 xfer, urb, urb->pipe, urb->transfer_buffer_length,
+		 urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? "dma" : "nodma",
+		 urb->pipe & USB_DIR_IN ? "inbound" : "outbound",
+		 cant_sleep ? "deferred" : "inline");
+	if (cant_sleep) {
+		usb_get_urb(urb);
+		spin_lock_irqsave(&wa->xfer_list_lock, my_flags);
+		list_add_tail(&xfer->list_node, &wa->xfer_delayed_list);
+		spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags);
+		queue_work(wusbd, &wa->xfer_work);
+	} else {
+		wa_urb_enqueue_b(xfer);
+	}
+	d_fnend(3, dev, "(wa %p ep %p urb %p [%d] gfp 0x%x) = 0\n",
+		wa, ep, urb, urb->transfer_buffer_length, gfp);
+	return 0;
+
+error_dequeued:
+	kfree(xfer);
+error_kmalloc:
+	d_fnend(3, dev, "(wa %p ep %p urb %p [%d] gfp 0x%x) = %d\n",
+		wa, ep, urb, urb->transfer_buffer_length, gfp, result);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wa_urb_enqueue);
+
+/*
+ * Dequeue a URB and make sure uwb_hcd_giveback_urb() [completion
+ * handler] is called.
+ *
+ * Until a transfer goes successfully through wa_urb_enqueue() it
+ * needs to be dequeued with completion calling; when stuck in delayed
+ * or before wa_xfer_setup() is called, we need to do completion.
+ *
+ *  not setup  If there is no hcpriv yet, that means that that enqueue
+ *             still had no time to set the xfer up. Because
+ *             urb->status should be other than -EINPROGRESS,
+ *             enqueue() will catch that and bail out.
+ *
+ * If the transfer has gone through setup, we just need to clean it
+ * up. If it has gone through submit(), we have to abort it [with an
+ * asynch request] and then make sure we cancel each segment.
+ *
+ */
+int wa_urb_dequeue(struct wahc *wa, struct urb *urb)
+{
+	struct device *dev = &wa->usb_iface->dev;
+	unsigned long flags, flags2;
+	struct wa_xfer *xfer;
+	struct wa_seg *seg;
+	struct wa_rpipe *rpipe;
+	unsigned cnt;
+	unsigned rpipe_ready = 0;
+
+	d_fnstart(3, dev, "(wa %p, urb %p)\n", wa, urb);
+
+	d_printf(1, dev, "xfer %p urb %p: aborting\n", urb->hcpriv, urb);
+	xfer = urb->hcpriv;
+	if (xfer == NULL) {
+		/* NOthing setup yet enqueue will see urb->status !=
+		 * -EINPROGRESS (by hcd layer) and bail out with
+		 * error, no need to do completion
+		 */
+		BUG_ON(urb->status == -EINPROGRESS);
+		goto out;
+	}
+	spin_lock_irqsave(&xfer->lock, flags);
+	rpipe = xfer->ep->hcpriv;
+	/* Check the delayed list -> if there, release and complete */
+	spin_lock_irqsave(&wa->xfer_list_lock, flags2);
+	if (!list_empty(&xfer->list_node) && xfer->seg == NULL)
+		goto dequeue_delayed;
+	spin_unlock_irqrestore(&wa->xfer_list_lock, flags2);
+	if (xfer->seg == NULL)  	/* still hasn't reached */
+		goto out_unlock;	/* setup(), enqueue_b() completes */
+	/* Ok, the xfer is in flight already, it's been setup and submitted.*/
+	__wa_xfer_abort(xfer);
+	for (cnt = 0; cnt < xfer->segs; cnt++) {
+		seg = xfer->seg[cnt];
+		switch (seg->status) {
+		case WA_SEG_NOTREADY:
+		case WA_SEG_READY:
+			printk(KERN_ERR "xfer %p#%u: dequeue bad state %u\n",
+			       xfer, cnt, seg->status);
+			WARN_ON(1);
+			break;
+		case WA_SEG_DELAYED:
+			seg->status = WA_SEG_ABORTED;
+			spin_lock_irqsave(&rpipe->seg_lock, flags2);
+			list_del(&seg->list_node);
+			xfer->segs_done++;
+			rpipe_ready = rpipe_avail_inc(rpipe);
+			spin_unlock_irqrestore(&rpipe->seg_lock, flags2);
+			break;
+		case WA_SEG_SUBMITTED:
+			seg->status = WA_SEG_ABORTED;
+			usb_unlink_urb(&seg->urb);
+			if (xfer->is_inbound == 0)
+				usb_unlink_urb(seg->dto_urb);
+			xfer->segs_done++;
+			rpipe_ready = rpipe_avail_inc(rpipe);
+			break;
+		case WA_SEG_PENDING:
+			seg->status = WA_SEG_ABORTED;
+			xfer->segs_done++;
+			rpipe_ready = rpipe_avail_inc(rpipe);
+			break;
+		case WA_SEG_DTI_PENDING:
+			usb_unlink_urb(wa->dti_urb);
+			seg->status = WA_SEG_ABORTED;
+			xfer->segs_done++;
+			rpipe_ready = rpipe_avail_inc(rpipe);
+			break;
+		case WA_SEG_DONE:
+		case WA_SEG_ERROR:
+		case WA_SEG_ABORTED:
+			break;
+		}
+	}
+	xfer->result = urb->status;	/* -ENOENT or -ECONNRESET */
+	__wa_xfer_is_done(xfer);
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	wa_xfer_completion(xfer);
+	if (rpipe_ready)
+		wa_xfer_delayed_run(rpipe);
+	d_fnend(3, dev, "(wa %p, urb %p) = 0\n", wa, urb);
+	return 0;
+
+out_unlock:
+	spin_unlock_irqrestore(&xfer->lock, flags);
+out:
+	d_fnend(3, dev, "(wa %p, urb %p) = 0\n", wa, urb);
+	return 0;
+
+dequeue_delayed:
+	list_del_init(&xfer->list_node);
+	spin_unlock_irqrestore(&wa->xfer_list_lock, flags2);
+	xfer->result = urb->status;
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	wa_xfer_giveback(xfer);
+	usb_put_urb(urb);		/* we got a ref in enqueue() */
+	d_fnend(3, dev, "(wa %p, urb %p) = 0\n", wa, urb);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(wa_urb_dequeue);
+
+/*
+ * Translation from WA status codes (WUSB1.0 Table 8.15) to errno
+ * codes
+ *
+ * Positive errno values are internal inconsistencies and should be
+ * flagged louder. Negative are to be passed up to the user in the
+ * normal way.
+ *
+ * @status: USB WA status code -- high two bits are stripped.
+ */
+static int wa_xfer_status_to_errno(u8 status)
+{
+	int errno;
+	u8 real_status = status;
+	static int xlat[] = {
+		[WA_XFER_STATUS_SUCCESS] = 		0,
+		[WA_XFER_STATUS_HALTED] = 		-EPIPE,
+		[WA_XFER_STATUS_DATA_BUFFER_ERROR] = 	-ENOBUFS,
+		[WA_XFER_STATUS_BABBLE] = 		-EOVERFLOW,
+		[WA_XFER_RESERVED] = 			EINVAL,
+		[WA_XFER_STATUS_NOT_FOUND] =		0,
+		[WA_XFER_STATUS_INSUFFICIENT_RESOURCE] = -ENOMEM,
+		[WA_XFER_STATUS_TRANSACTION_ERROR] = 	-EILSEQ,
+		[WA_XFER_STATUS_ABORTED] = 		-EINTR,
+		[WA_XFER_STATUS_RPIPE_NOT_READY] = 	EINVAL,
+		[WA_XFER_INVALID_FORMAT] = 		EINVAL,
+		[WA_XFER_UNEXPECTED_SEGMENT_NUMBER] = 	EINVAL,
+		[WA_XFER_STATUS_RPIPE_TYPE_MISMATCH] = 	EINVAL,
+	};
+	status &= 0x3f;
+
+	if (status == 0)
+		return 0;
+	if (status >= ARRAY_SIZE(xlat)) {
+		if (printk_ratelimit())
+			printk(KERN_ERR "%s(): BUG? "
+			       "Unknown WA transfer status 0x%02x\n",
+			       __func__, real_status);
+		return -EINVAL;
+	}
+	errno = xlat[status];
+	if (unlikely(errno > 0)) {
+		if (printk_ratelimit())
+			printk(KERN_ERR "%s(): BUG? "
+			       "Inconsistent WA status: 0x%02x\n",
+			       __func__, real_status);
+		errno = -errno;
+	}
+	return errno;
+}
+
+/*
+ * Process a xfer result completion message
+ *
+ * inbound transfers: need to schedule a DTI read
+ *
+ * FIXME: this functio needs to be broken up in parts
+ */
+static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer)
+{
+	int result;
+	struct device *dev = &wa->usb_iface->dev;
+	unsigned long flags;
+	u8 seg_idx;
+	struct wa_seg *seg;
+	struct wa_rpipe *rpipe;
+	struct wa_xfer_result *xfer_result = wa->xfer_result;
+	u8 done = 0;
+	u8 usb_status;
+	unsigned rpipe_ready = 0;
+
+	d_fnstart(3, dev, "(wa %p xfer %p)\n", wa, xfer);
+	spin_lock_irqsave(&xfer->lock, flags);
+	seg_idx = xfer_result->bTransferSegment & 0x7f;
+	if (unlikely(seg_idx >= xfer->segs))
+		goto error_bad_seg;
+	seg = xfer->seg[seg_idx];
+	rpipe = xfer->ep->hcpriv;
+	usb_status = xfer_result->bTransferStatus;
+	d_printf(2, dev, "xfer %p#%u: bTransferStatus 0x%02x (seg %u)\n",
+		 xfer, seg_idx, usb_status, seg->status);
+	if (seg->status == WA_SEG_ABORTED
+	    || seg->status == WA_SEG_ERROR)	/* already handled */
+		goto segment_aborted;
+	if (seg->status == WA_SEG_SUBMITTED)	/* ops, got here */
+		seg->status = WA_SEG_PENDING;	/* before wa_seg{_dto}_cb() */
+	if (seg->status != WA_SEG_PENDING) {
+		if (printk_ratelimit())
+			dev_err(dev, "xfer %p#%u: Bad segment state %u\n",
+				xfer, seg_idx, seg->status);
+		seg->status = WA_SEG_PENDING;	/* workaround/"fix" it */
+	}
+	if (usb_status & 0x80) {
+		seg->result = wa_xfer_status_to_errno(usb_status);
+		dev_err(dev, "DTI: xfer %p#%u failed (0x%02x)\n",
+			xfer, seg->index, usb_status);
+		goto error_complete;
+	}
+	/* FIXME: we ignore warnings, tally them for stats */
+	if (usb_status & 0x40) 		/* Warning?... */
+		usb_status = 0;		/* ... pass */
+	if (xfer->is_inbound) {	/* IN data phase: read to buffer */
+		seg->status = WA_SEG_DTI_PENDING;
+		BUG_ON(wa->buf_in_urb->status == -EINPROGRESS);
+		if (xfer->is_dma) {
+			wa->buf_in_urb->transfer_dma =
+				xfer->urb->transfer_dma
+				+ seg_idx * xfer->seg_size;
+			wa->buf_in_urb->transfer_flags
+				|= URB_NO_TRANSFER_DMA_MAP;
+		} else {
+			wa->buf_in_urb->transfer_buffer =
+				xfer->urb->transfer_buffer
+				+ seg_idx * xfer->seg_size;
+			wa->buf_in_urb->transfer_flags
+				&= ~URB_NO_TRANSFER_DMA_MAP;
+		}
+		wa->buf_in_urb->transfer_buffer_length =
+			le32_to_cpu(xfer_result->dwTransferLength);
+		wa->buf_in_urb->context = seg;
+		result = usb_submit_urb(wa->buf_in_urb, GFP_ATOMIC);
+		if (result < 0)
+			goto error_submit_buf_in;
+	} else {
+		/* OUT data phase, complete it -- */
+		seg->status = WA_SEG_DONE;
+		seg->result = le32_to_cpu(xfer_result->dwTransferLength);
+		xfer->segs_done++;
+		rpipe_ready = rpipe_avail_inc(rpipe);
+		done = __wa_xfer_is_done(xfer);
+	}
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	if (done)
+		wa_xfer_completion(xfer);
+	if (rpipe_ready)
+		wa_xfer_delayed_run(rpipe);
+	d_fnend(3, dev, "(wa %p xfer %p) = void\n", wa, xfer);
+	return;
+
+
+error_submit_buf_in:
+	if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
+		dev_err(dev, "DTI: URB max acceptable errors "
+			"exceeded, resetting device\n");
+		wa_reset_all(wa);
+	}
+	if (printk_ratelimit())
+		dev_err(dev, "xfer %p#%u: can't submit DTI data phase: %d\n",
+			xfer, seg_idx, result);
+	seg->result = result;
+error_complete:
+	seg->status = WA_SEG_ERROR;
+	xfer->segs_done++;
+	rpipe_ready = rpipe_avail_inc(rpipe);
+	__wa_xfer_abort(xfer);
+	done = __wa_xfer_is_done(xfer);
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	if (done)
+		wa_xfer_completion(xfer);
+	if (rpipe_ready)
+		wa_xfer_delayed_run(rpipe);
+	d_fnend(3, dev, "(wa %p xfer %p) = void [segment/DTI-submit error]\n",
+		wa, xfer);
+	return;
+
+
+error_bad_seg:
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	wa_urb_dequeue(wa, xfer->urb);
+	if (printk_ratelimit())
+		dev_err(dev, "xfer %p#%u: bad segment\n", xfer, seg_idx);
+	if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
+		dev_err(dev, "DTI: URB max acceptable errors "
+			"exceeded, resetting device\n");
+		wa_reset_all(wa);
+	}
+	d_fnend(3, dev, "(wa %p xfer %p) = void [bad seg]\n", wa, xfer);
+	return;
+
+
+segment_aborted:
+	/* nothing to do, as the aborter did the completion */
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	d_fnend(3, dev, "(wa %p xfer %p) = void [segment aborted]\n",
+		wa, xfer);
+	return;
+
+}
+
+/*
+ * Callback for the IN data phase
+ *
+ * If succesful transition state; otherwise, take a note of the
+ * error, mark this segment done and try completion.
+ *
+ * Note we don't access until we are sure that the transfer hasn't
+ * been cancelled (ECONNRESET, ENOENT), which could mean that
+ * seg->xfer could be already gone.
+ */
+static void wa_buf_in_cb(struct urb *urb)
+{
+	struct wa_seg *seg = urb->context;
+	struct wa_xfer *xfer = seg->xfer;
+	struct wahc *wa;
+	struct device *dev;
+	struct wa_rpipe *rpipe;
+	unsigned rpipe_ready;
+	unsigned long flags;
+	u8 done = 0;
+
+	d_fnstart(3, NULL, "(urb %p [%d])\n", urb, urb->status);
+	switch (urb->status) {
+	case 0:
+		spin_lock_irqsave(&xfer->lock, flags);
+		wa = xfer->wa;
+		dev = &wa->usb_iface->dev;
+		rpipe = xfer->ep->hcpriv;
+		d_printf(2, dev, "xfer %p#%u: data in done (%zu bytes)\n",
+			   xfer, seg->index, (size_t)urb->actual_length);
+		seg->status = WA_SEG_DONE;
+		seg->result = urb->actual_length;
+		xfer->segs_done++;
+		rpipe_ready = rpipe_avail_inc(rpipe);
+		done = __wa_xfer_is_done(xfer);
+		spin_unlock_irqrestore(&xfer->lock, flags);
+		if (done)
+			wa_xfer_completion(xfer);
+		if (rpipe_ready)
+			wa_xfer_delayed_run(rpipe);
+		break;
+	case -ECONNRESET:	/* URB unlinked; no need to do anything */
+	case -ENOENT:		/* as it was done by the who unlinked us */
+		break;
+	default:		/* Other errors ... */
+		spin_lock_irqsave(&xfer->lock, flags);
+		wa = xfer->wa;
+		dev = &wa->usb_iface->dev;
+		rpipe = xfer->ep->hcpriv;
+		if (printk_ratelimit())
+			dev_err(dev, "xfer %p#%u: data in error %d\n",
+				xfer, seg->index, urb->status);
+		if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
+			    EDC_ERROR_TIMEFRAME)){
+			dev_err(dev, "DTO: URB max acceptable errors "
+				"exceeded, resetting device\n");
+			wa_reset_all(wa);
+		}
+		seg->status = WA_SEG_ERROR;
+		seg->result = urb->status;
+		xfer->segs_done++;
+		rpipe_ready = rpipe_avail_inc(rpipe);
+		__wa_xfer_abort(xfer);
+		done = __wa_xfer_is_done(xfer);
+		spin_unlock_irqrestore(&xfer->lock, flags);
+		if (done)
+			wa_xfer_completion(xfer);
+		if (rpipe_ready)
+			wa_xfer_delayed_run(rpipe);
+	}
+	d_fnend(3, NULL, "(urb %p [%d]) = void\n", urb, urb->status);
+}
+
+/*
+ * Handle an incoming transfer result buffer
+ *
+ * Given a transfer result buffer, it completes the transfer (possibly
+ * scheduling and buffer in read) and then resubmits the DTI URB for a
+ * new transfer result read.
+ *
+ *
+ * The xfer_result DTI URB state machine
+ *
+ * States: OFF | RXR (Read-Xfer-Result) | RBI (Read-Buffer-In)
+ *
+ * We start in OFF mode, the first xfer_result notification [through
+ * wa_handle_notif_xfer()] moves us to RXR by posting the DTI-URB to
+ * read.
+ *
+ * We receive a buffer -- if it is not a xfer_result, we complain and
+ * repost the DTI-URB. If it is a xfer_result then do the xfer seg
+ * request accounting. If it is an IN segment, we move to RBI and post
+ * a BUF-IN-URB to the right buffer. The BUF-IN-URB callback will
+ * repost the DTI-URB and move to RXR state. if there was no IN
+ * segment, it will repost the DTI-URB.
+ *
+ * We go back to OFF when we detect a ENOENT or ESHUTDOWN (or too many
+ * errors) in the URBs.
+ */
+static void wa_xfer_result_cb(struct urb *urb)
+{
+	int result;
+	struct wahc *wa = urb->context;
+	struct device *dev = &wa->usb_iface->dev;
+	struct wa_xfer_result *xfer_result;
+	u32 xfer_id;
+	struct wa_xfer *xfer;
+	u8 usb_status;
+
+	d_fnstart(3, dev, "(%p)\n", wa);
+	BUG_ON(wa->dti_urb != urb);
+	switch (wa->dti_urb->status) {
+	case 0:
+		/* We have a xfer result buffer; check it */
+		d_printf(2, dev, "DTI: xfer result %d bytes at %p\n",
+			   urb->actual_length, urb->transfer_buffer);
+		d_dump(3, dev, urb->transfer_buffer, urb->actual_length);
+		if (wa->dti_urb->actual_length != sizeof(*xfer_result)) {
+			dev_err(dev, "DTI Error: xfer result--bad size "
+				"xfer result (%d bytes vs %zu needed)\n",
+				urb->actual_length, sizeof(*xfer_result));
+			break;
+		}
+		xfer_result = wa->xfer_result;
+		if (xfer_result->hdr.bLength != sizeof(*xfer_result)) {
+			dev_err(dev, "DTI Error: xfer result--"
+				"bad header length %u\n",
+				xfer_result->hdr.bLength);
+			break;
+		}
+		if (xfer_result->hdr.bNotifyType != WA_XFER_RESULT) {
+			dev_err(dev, "DTI Error: xfer result--"
+				"bad header type 0x%02x\n",
+				xfer_result->hdr.bNotifyType);
+			break;
+		}
+		usb_status = xfer_result->bTransferStatus & 0x3f;
+		if (usb_status == WA_XFER_STATUS_ABORTED
+		    || usb_status == WA_XFER_STATUS_NOT_FOUND)
+			/* taken care of already */
+			break;
+		xfer_id = xfer_result->dwTransferID;
+		xfer = wa_xfer_get_by_id(wa, xfer_id);
+		if (xfer == NULL) {
+			/* FIXME: transaction might have been cancelled */
+			dev_err(dev, "DTI Error: xfer result--"
+				"unknown xfer 0x%08x (status 0x%02x)\n",
+				xfer_id, usb_status);
+			break;
+		}
+		wa_xfer_result_chew(wa, xfer);
+		wa_xfer_put(xfer);
+		break;
+	case -ENOENT:		/* (we killed the URB)...so, no broadcast */
+	case -ESHUTDOWN:	/* going away! */
+		dev_dbg(dev, "DTI: going down! %d\n", urb->status);
+		goto out;
+	default:
+		/* Unknown error */
+		if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS,
+			    EDC_ERROR_TIMEFRAME)) {
+			dev_err(dev, "DTI: URB max acceptable errors "
+				"exceeded, resetting device\n");
+			wa_reset_all(wa);
+			goto out;
+		}
+		if (printk_ratelimit())
+			dev_err(dev, "DTI: URB error %d\n", urb->status);
+		break;
+	}
+	/* Resubmit the DTI URB */
+	result = usb_submit_urb(wa->dti_urb, GFP_ATOMIC);
+	if (result < 0) {
+		dev_err(dev, "DTI Error: Could not submit DTI URB (%d), "
+			"resetting\n", result);
+		wa_reset_all(wa);
+	}
+out:
+	d_fnend(3, dev, "(%p) = void\n", wa);
+	return;
+}
+
+/*
+ * Transfer complete notification
+ *
+ * Called from the notif.c code. We get a notification on EP2 saying
+ * that some endpoint has some transfer result data available. We are
+ * about to read it.
+ *
+ * To speed up things, we always have a URB reading the DTI URB; we
+ * don't really set it up and start it until the first xfer complete
+ * notification arrives, which is what we do here.
+ *
+ * Follow up in wa_xfer_result_cb(), as that's where the whole state
+ * machine starts.
+ *
+ * So here we just initialize the DTI URB for reading transfer result
+ * notifications and also the buffer-in URB, for reading buffers. Then
+ * we just submit the DTI URB.
+ *
+ * @wa shall be referenced
+ */
+void wa_handle_notif_xfer(struct wahc *wa, struct wa_notif_hdr *notif_hdr)
+{
+	int result;
+	struct device *dev = &wa->usb_iface->dev;
+	struct wa_notif_xfer *notif_xfer;
+	const struct usb_endpoint_descriptor *dti_epd = wa->dti_epd;
+
+	d_fnstart(4, dev, "(%p, %p)\n", wa, notif_hdr);
+	notif_xfer = container_of(notif_hdr, struct wa_notif_xfer, hdr);
+	BUG_ON(notif_hdr->bNotifyType != WA_NOTIF_TRANSFER);
+
+	if ((0x80 | notif_xfer->bEndpoint) != dti_epd->bEndpointAddress) {
+		/* FIXME: hardcoded limitation, adapt */
+		dev_err(dev, "BUG: DTI ep is %u, not %u (hack me)\n",
+			notif_xfer->bEndpoint, dti_epd->bEndpointAddress);
+		goto error;
+	}
+	if (wa->dti_urb != NULL)	/* DTI URB already started */
+		goto out;
+
+	wa->dti_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (wa->dti_urb == NULL) {
+		dev_err(dev, "Can't allocate DTI URB\n");
+		goto error_dti_urb_alloc;
+	}
+	usb_fill_bulk_urb(
+		wa->dti_urb, wa->usb_dev,
+		usb_rcvbulkpipe(wa->usb_dev, 0x80 | notif_xfer->bEndpoint),
+		wa->xfer_result, wa->xfer_result_size,
+		wa_xfer_result_cb, wa);
+
+	wa->buf_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (wa->buf_in_urb == NULL) {
+		dev_err(dev, "Can't allocate BUF-IN URB\n");
+		goto error_buf_in_urb_alloc;
+	}
+	usb_fill_bulk_urb(
+		wa->buf_in_urb, wa->usb_dev,
+		usb_rcvbulkpipe(wa->usb_dev, 0x80 | notif_xfer->bEndpoint),
+		NULL, 0, wa_buf_in_cb, wa);
+	result = usb_submit_urb(wa->dti_urb, GFP_KERNEL);
+	if (result < 0) {
+		dev_err(dev, "DTI Error: Could not submit DTI URB (%d), "
+			"resetting\n", result);
+		goto error_dti_urb_submit;
+	}
+out:
+	d_fnend(4, dev, "(%p, %p) = void\n", wa, notif_hdr);
+	return;
+
+error_dti_urb_submit:
+	usb_put_urb(wa->buf_in_urb);
+error_buf_in_urb_alloc:
+	usb_put_urb(wa->dti_urb);
+	wa->dti_urb = NULL;
+error_dti_urb_alloc:
+error:
+	wa_reset_all(wa);
+	d_fnend(4, dev, "(%p, %p) = void\n", wa, notif_hdr);
+	return;
+}
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
new file mode 100644
index 0000000..07c63a3
--- /dev/null
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -0,0 +1,418 @@
+/*
+ * Wireless USB Host Controller
+ * sysfs glue, wusbcore module support and life cycle management
+ *
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Creation/destruction of wusbhc is split in two parts; that that
+ * doesn't require the HCD to be added (wusbhc_{create,destroy}) and
+ * the one that requires (phase B, wusbhc_b_{create,destroy}).
+ *
+ * This is so because usb_add_hcd() will start the HC, and thus, all
+ * the HC specific stuff has to be already initialiazed (like sysfs
+ * thingies).
+ */
+#include <linux/device.h>
+#include <linux/module.h>
+#include "wusbhc.h"
+
+/**
+ * Extract the wusbhc that corresponds to a USB Host Controller class device
+ *
+ * WARNING! Apply only if @dev is that of a
+ *          wusbhc.usb_hcd.self->class_dev; otherwise, you loose.
+ */
+static struct wusbhc *usbhc_dev_to_wusbhc(struct device *dev)
+{
+	struct usb_bus *usb_bus = dev_get_drvdata(dev);
+	struct usb_hcd *usb_hcd = bus_to_hcd(usb_bus);
+	return usb_hcd_to_wusbhc(usb_hcd);
+}
+
+/*
+ * Show & store the current WUSB trust timeout
+ *
+ * We don't do locking--it is an 'atomic' value.
+ *
+ * The units that we store/show are always MILLISECONDS. However, the
+ * value of trust_timeout is jiffies.
+ */
+static ssize_t wusb_trust_timeout_show(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", wusbhc->trust_timeout);
+}
+
+static ssize_t wusb_trust_timeout_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t size)
+{
+	struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+	ssize_t result = -ENOSYS;
+	unsigned trust_timeout;
+
+	result = sscanf(buf, "%u", &trust_timeout);
+	if (result != 1) {
+		result = -EINVAL;
+		goto out;
+	}
+	/* FIXME: maybe we should check for range validity? */
+	wusbhc->trust_timeout = trust_timeout;
+	cancel_delayed_work(&wusbhc->keep_alive_timer);
+	flush_workqueue(wusbd);
+	queue_delayed_work(wusbd, &wusbhc->keep_alive_timer,
+			   (trust_timeout * CONFIG_HZ)/1000/2);
+out:
+	return result < 0 ? result : size;
+}
+static DEVICE_ATTR(wusb_trust_timeout, 0644, wusb_trust_timeout_show,
+					     wusb_trust_timeout_store);
+
+/*
+ * Show & store the current WUSB CHID
+ */
+static ssize_t wusb_chid_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+	ssize_t result = 0;
+
+	if (wusbhc->wuie_host_info != NULL)
+		result += ckhdid_printf(buf, PAGE_SIZE,
+					&wusbhc->wuie_host_info->CHID);
+	return result;
+}
+
+/*
+ * Store a new CHID
+ *
+ * This will (FIXME) trigger many changes.
+ *
+ * - Send an all zeros CHID and it will stop the controller
+ * - Send a non-zero CHID and it will start it
+ *   (unless it was started, it will just change the CHID,
+ *   diconnecting all devices first).
+ *
+ * So first we scan the MMC we are sent and then we act on it.  We
+ * read it in the same format as we print it, an ASCII string of 16
+ * hex bytes.
+ *
+ * See wusbhc_chid_set() for more info.
+ */
+static ssize_t wusb_chid_store(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t size)
+{
+	struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+	struct wusb_ckhdid chid;
+	ssize_t result;
+
+	result = sscanf(buf,
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx\n",
+			&chid.data[0] , &chid.data[1] ,
+			&chid.data[2] , &chid.data[3] ,
+			&chid.data[4] , &chid.data[5] ,
+			&chid.data[6] , &chid.data[7] ,
+			&chid.data[8] , &chid.data[9] ,
+			&chid.data[10], &chid.data[11],
+			&chid.data[12], &chid.data[13],
+			&chid.data[14], &chid.data[15]);
+	if (result != 16) {
+		dev_err(dev, "Unrecognized CHID (need 16 8-bit hex digits): "
+			"%d\n", (int)result);
+		return -EINVAL;
+	}
+	result = wusbhc_chid_set(wusbhc, &chid);
+	return result < 0 ? result : size;
+}
+static DEVICE_ATTR(wusb_chid, 0644, wusb_chid_show, wusb_chid_store);
+
+/* Group all the WUSBHC attributes */
+static struct attribute *wusbhc_attrs[] = {
+		&dev_attr_wusb_trust_timeout.attr,
+		&dev_attr_wusb_chid.attr,
+		NULL,
+};
+
+static struct attribute_group wusbhc_attr_group = {
+	.name = NULL,	/* we want them in the same directory */
+	.attrs = wusbhc_attrs,
+};
+
+/*
+ * Create a wusbhc instance
+ *
+ * NOTEs:
+ *
+ *  - assumes *wusbhc has been zeroed and wusbhc->usb_hcd has been
+ *    initialized but not added.
+ *
+ *  - fill out ports_max, mmcies_max and mmcie_{add,rm} before calling.
+ *
+ *  - fill out wusbhc->uwb_rc and refcount it before calling
+ *  - fill out the wusbhc->sec_modes array
+ */
+int wusbhc_create(struct wusbhc *wusbhc)
+{
+	int result = 0;
+
+	wusbhc->trust_timeout = WUSB_TRUST_TIMEOUT_MS;
+	mutex_init(&wusbhc->mutex);
+	result = wusbhc_mmcie_create(wusbhc);
+	if (result < 0)
+		goto error_mmcie_create;
+	result = wusbhc_devconnect_create(wusbhc);
+	if (result < 0)
+		goto error_devconnect_create;
+	result = wusbhc_rh_create(wusbhc);
+	if (result < 0)
+		goto error_rh_create;
+	result = wusbhc_sec_create(wusbhc);
+	if (result < 0)
+		goto error_sec_create;
+	return 0;
+
+error_sec_create:
+	wusbhc_rh_destroy(wusbhc);
+error_rh_create:
+	wusbhc_devconnect_destroy(wusbhc);
+error_devconnect_create:
+	wusbhc_mmcie_destroy(wusbhc);
+error_mmcie_create:
+	return result;
+}
+EXPORT_SYMBOL_GPL(wusbhc_create);
+
+static inline struct kobject *wusbhc_kobj(struct wusbhc *wusbhc)
+{
+	return &wusbhc->usb_hcd.self.controller->kobj;
+}
+
+/*
+ * Phase B of a wusbhc instance creation
+ *
+ * Creates fields that depend on wusbhc->usb_hcd having been
+ * added. This is where we create the sysfs files in
+ * /sys/class/usb_host/usb_hostX/.
+ *
+ * NOTE: Assumes wusbhc->usb_hcd has been already added by the upper
+ *       layer (hwahc or whci)
+ */
+int wusbhc_b_create(struct wusbhc *wusbhc)
+{
+	int result = 0;
+	struct device *dev = wusbhc->usb_hcd.self.controller;
+
+	result = sysfs_create_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group);
+	if (result < 0) {
+		dev_err(dev, "Cannot register WUSBHC attributes: %d\n", result);
+		goto error_create_attr_group;
+	}
+
+	result = wusbhc_pal_register(wusbhc);
+	if (result < 0)
+		goto error_pal_register;
+	return 0;
+
+error_pal_register:
+	sysfs_remove_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group);
+error_create_attr_group:
+	return result;
+}
+EXPORT_SYMBOL_GPL(wusbhc_b_create);
+
+void wusbhc_b_destroy(struct wusbhc *wusbhc)
+{
+	wusbhc_pal_unregister(wusbhc);
+	sysfs_remove_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group);
+}
+EXPORT_SYMBOL_GPL(wusbhc_b_destroy);
+
+void wusbhc_destroy(struct wusbhc *wusbhc)
+{
+	wusbhc_sec_destroy(wusbhc);
+	wusbhc_rh_destroy(wusbhc);
+	wusbhc_devconnect_destroy(wusbhc);
+	wusbhc_mmcie_destroy(wusbhc);
+}
+EXPORT_SYMBOL_GPL(wusbhc_destroy);
+
+struct workqueue_struct *wusbd;
+EXPORT_SYMBOL_GPL(wusbd);
+
+/*
+ * WUSB Cluster ID allocation map
+ *
+ * Each WUSB bus in a channel is identified with a Cluster Id in the
+ * unauth address pace (WUSB1.0[4.3]). We take the range 0xe0 to 0xff
+ * (that's space for 31 WUSB controllers, as 0xff can't be taken). We
+ * start taking from 0xff, 0xfe, 0xfd... (hence the += or -= 0xff).
+ *
+ * For each one we taken, we pin it in the bitap
+ */
+#define CLUSTER_IDS 32
+static DECLARE_BITMAP(wusb_cluster_id_table, CLUSTER_IDS);
+static DEFINE_SPINLOCK(wusb_cluster_ids_lock);
+
+/*
+ * Get a WUSB Cluster ID
+ *
+ * Need to release with wusb_cluster_id_put() when done w/ it.
+ */
+/* FIXME: coordinate with the choose_addres() from the USB stack */
+/* we want to leave the top of the 128 range for cluster addresses and
+ * the bottom for device addresses (as we map them one on one with
+ * ports). */
+u8 wusb_cluster_id_get(void)
+{
+	u8 id;
+	spin_lock(&wusb_cluster_ids_lock);
+	id = find_first_zero_bit(wusb_cluster_id_table, CLUSTER_IDS);
+	if (id > CLUSTER_IDS) {
+		id = 0;
+		goto out;
+	}
+	set_bit(id, wusb_cluster_id_table);
+	id = (u8) 0xff - id;
+out:
+	spin_unlock(&wusb_cluster_ids_lock);
+	return id;
+
+}
+EXPORT_SYMBOL_GPL(wusb_cluster_id_get);
+
+/*
+ * Release a WUSB Cluster ID
+ *
+ * Obtained it with wusb_cluster_id_get()
+ */
+void wusb_cluster_id_put(u8 id)
+{
+	id = 0xff - id;
+	BUG_ON(id >= CLUSTER_IDS);
+	spin_lock(&wusb_cluster_ids_lock);
+	WARN_ON(!test_bit(id, wusb_cluster_id_table));
+	clear_bit(id, wusb_cluster_id_table);
+	spin_unlock(&wusb_cluster_ids_lock);
+}
+EXPORT_SYMBOL_GPL(wusb_cluster_id_put);
+
+/**
+ * wusbhc_giveback_urb - return an URB to the USB core
+ * @wusbhc: the host controller the URB is from.
+ * @urb:    the URB.
+ * @status: the URB's status.
+ *
+ * Return an URB to the USB core doing some additional WUSB specific
+ * processing.
+ *
+ *  - After a successful transfer, update the trust timeout timestamp
+ *    for the WUSB device.
+ *
+ *  - [WUSB] sections 4.13 and 7.5.1 specifies the stop retrasmittion
+ *    condition for the WCONNECTACK_IE is that the host has observed
+ *    the associated device responding to a control transfer.
+ */
+void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status)
+{
+	struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
+
+	if (status == 0) {
+		wusb_dev->entry_ts = jiffies;
+
+		/* wusbhc_devconnect_acked() can't be called from from
+		   atomic context so defer it to a work queue. */
+		if (!list_empty(&wusb_dev->cack_node))
+			queue_work(wusbd, &wusb_dev->devconnect_acked_work);
+	}
+
+	usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status);
+}
+EXPORT_SYMBOL_GPL(wusbhc_giveback_urb);
+
+/**
+ * wusbhc_reset_all - reset the HC hardware
+ * @wusbhc: the host controller to reset.
+ *
+ * Request a full hardware reset of the chip.  This will also reset
+ * the radio controller and any other PALs.
+ */
+void wusbhc_reset_all(struct wusbhc *wusbhc)
+{
+	uwb_rc_reset_all(wusbhc->uwb_rc);
+}
+EXPORT_SYMBOL_GPL(wusbhc_reset_all);
+
+static struct notifier_block wusb_usb_notifier = {
+	.notifier_call = wusb_usb_ncb,
+	.priority = INT_MAX	/* Need to be called first of all */
+};
+
+static int __init wusbcore_init(void)
+{
+	int result;
+	result = wusb_crypto_init();
+	if (result < 0)
+		goto error_crypto_init;
+	/* WQ is singlethread because we need to serialize notifications */
+	wusbd = create_singlethread_workqueue("wusbd");
+	if (wusbd == NULL) {
+		result = -ENOMEM;
+		printk(KERN_ERR "WUSB-core: Cannot create wusbd workqueue\n");
+		goto error_wusbd_create;
+	}
+	usb_register_notify(&wusb_usb_notifier);
+	bitmap_zero(wusb_cluster_id_table, CLUSTER_IDS);
+	set_bit(0, wusb_cluster_id_table);	/* reserve Cluster ID 0xff */
+	return 0;
+
+error_wusbd_create:
+	wusb_crypto_exit();
+error_crypto_init:
+	return result;
+
+}
+module_init(wusbcore_init);
+
+static void __exit wusbcore_exit(void)
+{
+	clear_bit(0, wusb_cluster_id_table);
+	if (!bitmap_empty(wusb_cluster_id_table, CLUSTER_IDS)) {
+		char buf[256];
+		bitmap_scnprintf(buf, sizeof(buf), wusb_cluster_id_table,
+				 CLUSTER_IDS);
+		printk(KERN_ERR "BUG: WUSB Cluster IDs not released "
+		       "on exit: %s\n", buf);
+		WARN_ON(1);
+	}
+	usb_unregister_notify(&wusb_usb_notifier);
+	destroy_workqueue(wusbd);
+	wusb_crypto_exit();
+}
+module_exit(wusbcore_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Wireless USB core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
new file mode 100644
index 0000000..d0c1324
--- /dev/null
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -0,0 +1,495 @@
+/*
+ * Wireless USB Host Controller
+ * Common infrastructure for WHCI and HWA WUSB-HC drivers
+ *
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This driver implements parts common to all Wireless USB Host
+ * Controllers (struct wusbhc, embedding a struct usb_hcd) and is used
+ * by:
+ *
+ *   - hwahc: HWA, USB-dongle that implements a Wireless USB host
+ *     controller, (Wireless USB 1.0 Host-Wire-Adapter specification).
+ *
+ *   - whci: WHCI, a PCI card with a wireless host controller
+ *     (Wireless Host Controller Interface 1.0 specification).
+ *
+ * Check out the Design-overview.txt file in the source documentation
+ * for other details on the implementation.
+ *
+ * Main blocks:
+ *
+ *  rh         Root Hub emulation (part of the HCD glue)
+ *
+ *  devconnect Handle all the issues related to device connection,
+ *             authentication, disconnection, timeout, reseting,
+ *             keepalives, etc.
+ *
+ *  mmc        MMC IE broadcasting handling
+ *
+ * A host controller driver just initializes its stuff and as part of
+ * that, creates a 'struct wusbhc' instance that handles all the
+ * common WUSB mechanisms. Links in the function ops that are specific
+ * to it and then registers the host controller. Ready to run.
+ */
+
+#ifndef __WUSBHC_H__
+#define __WUSBHC_H__
+
+#include <linux/usb.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/kref.h>
+#include <linux/workqueue.h>
+/* FIXME: Yes, I know: BAD--it's not my fault the USB HC iface is not
+ *        public */
+#include <linux/../../drivers/usb/core/hcd.h>
+#include <linux/uwb.h>
+#include <linux/usb/wusb.h>
+
+
+/**
+ * Wireless USB device
+ *
+ * Describe a WUSB device connected to the cluster. This struct
+ * belongs to the 'struct wusb_port' it is attached to and it is
+ * responsible for putting and clearing the pointer to it.
+ *
+ * Note this "complements" the 'struct usb_device' that the usb_hcd
+ * keeps for each connected USB device. However, it extends some
+ * information that is not available (there is no hcpriv ptr in it!)
+ * *and* most importantly, it's life cycle is different. It is created
+ * as soon as we get a DN_Connect (connect request notification) from
+ * the device through the WUSB host controller; the USB stack doesn't
+ * create the device until we authenticate it. FIXME: this will
+ * change.
+ *
+ * @bos:    This is allocated when the BOS descriptors are read from
+ *          the device and freed upon the wusb_dev struct dying.
+ * @wusb_cap_descr: points into @bos, and has been verified to be size
+ *                  safe.
+ */
+struct wusb_dev {
+	struct kref refcnt;
+	struct wusbhc *wusbhc;
+	struct list_head cack_node;	/* Connect-Ack list */
+	u8 port_idx;
+	u8 addr;
+	u8 beacon_type:4;
+	struct usb_encryption_descriptor ccm1_etd;
+	struct wusb_ckhdid cdid;
+	unsigned long entry_ts;
+	struct usb_bos_descriptor *bos;
+	struct usb_wireless_cap_descriptor *wusb_cap_descr;
+	struct uwb_mas_bm availability;
+	struct work_struct devconnect_acked_work;
+	struct urb *set_gtk_urb;
+	struct usb_ctrlrequest *set_gtk_req;
+	struct usb_device *usb_dev;
+};
+
+#define WUSB_DEV_ADDR_UNAUTH 0x80
+
+static inline void wusb_dev_init(struct wusb_dev *wusb_dev)
+{
+	kref_init(&wusb_dev->refcnt);
+	/* no need to init the cack_node */
+}
+
+extern void wusb_dev_destroy(struct kref *_wusb_dev);
+
+static inline struct wusb_dev *wusb_dev_get(struct wusb_dev *wusb_dev)
+{
+	kref_get(&wusb_dev->refcnt);
+	return wusb_dev;
+}
+
+static inline void wusb_dev_put(struct wusb_dev *wusb_dev)
+{
+	kref_put(&wusb_dev->refcnt, wusb_dev_destroy);
+}
+
+/**
+ * Wireless USB Host Controlller root hub "fake" ports
+ * (state and device information)
+ *
+ * Wireless USB is wireless, so there are no ports; but we
+ * fake'em. Each RC can connect a max of devices at the same time
+ * (given in the Wireless Adapter descriptor, bNumPorts or WHCI's
+ * caps), referred to in wusbhc->ports_max.
+ *
+ * See rh.c for more information.
+ *
+ * The @status and @change use the same bits as in USB2.0[11.24.2.7],
+ * so we don't have to do much when getting the port's status.
+ *
+ * WUSB1.0[7.1], USB2.0[11.24.2.7.1,fig 11-10],
+ * include/linux/usb_ch9.h (#define USB_PORT_STAT_*)
+ */
+struct wusb_port {
+	u16 status;
+	u16 change;
+	struct wusb_dev *wusb_dev;	/* connected device's info */
+	unsigned reset_count;
+	u32 ptk_tkid;
+};
+
+/**
+ * WUSB Host Controller specifics
+ *
+ * All fields that are common to all Wireless USB controller types
+ * (HWA and WHCI) are grouped here. Host Controller
+ * functions/operations that only deal with general Wireless USB HC
+ * issues use this data type to refer to the host.
+ *
+ * @usb_hcd 	   Instantiation of a USB host controller
+ *                 (initialized by upper layer [HWA=HC or WHCI].
+ *
+ * @dev		   Device that implements this; initialized by the
+ *                 upper layer (HWA-HC, WHCI...); this device should
+ *                 have a refcount.
+ *
+ * @trust_timeout  After this time without hearing for device
+ *                 activity, we consider the device gone and we have to
+ *                 re-authenticate.
+ *
+ *                 Can be accessed w/o locking--however, read to a
+ *                 local variable then use.
+ *
+ * @chid           WUSB Cluster Host ID: this is supposed to be a
+ *                 unique value that doesn't change across reboots (so
+ *                 that your devices do not require re-association).
+ *
+ *                 Read/Write protected by @mutex
+ *
+ * @dev_info       This array has ports_max elements. It is used to
+ *                 give the HC information about the WUSB devices (see
+ *                 'struct wusb_dev_info').
+ *
+ *	           For HWA we need to allocate it in heap; for WHCI it
+ *                 needs to be permanently mapped, so we keep it for
+ *                 both and make it easy. Call wusbhc->dev_info_set()
+ *                 to update an entry.
+ *
+ * @ports_max	   Number of simultaneous device connections (fake
+ *                 ports) this HC will take. Read-only.
+ *
+ * @port      	   Array of port status for each fake root port. Guaranteed to
+ *                 always be the same lenght during device existence
+ *                 [this allows for some unlocked but referenced reading].
+ *
+ * @mmcies_max	   Max number of Information Elements this HC can send
+ *                 in its MMC. Read-only.
+ *
+ * @mmcie_add	   HC specific operation (WHCI or HWA) for adding an
+ *                 MMCIE.
+ *
+ * @mmcie_rm	   HC specific operation (WHCI or HWA) for removing an
+ *                 MMCIE.
+ *
+ * @enc_types	   Array which describes the encryptions methods
+ *                 supported by the host as described in WUSB1.0 --
+ *                 one entry per supported method. As of WUSB1.0 there
+ *                 is only four methods, we make space for eight just in
+ *                 case they decide to add some more (and pray they do
+ *                 it in sequential order). if 'enc_types[enc_method]
+ *                 != 0', then it is supported by the host. enc_method
+ *                 is USB_ENC_TYPE*.
+ *
+ * @set_ptk:       Set the PTK and enable encryption for a device. Or, if
+ *                 the supplied key is NULL, disable encryption for that
+ *                 device.
+ *
+ * @set_gtk:       Set the GTK to be used for all future broadcast packets
+ *                 (i.e., MMCs).  With some hardware, setting the GTK may start
+ *                 MMC transmission.
+ *
+ * NOTE:
+ *
+ *  - If wusb_dev->usb_dev is not NULL, then usb_dev is valid
+ *    (wusb_dev has a refcount on it). Likewise, if usb_dev->wusb_dev
+ *    is not NULL, usb_dev->wusb_dev is valid (usb_dev keeps a
+ *    refcount on it).
+ *
+ *    Most of the times when you need to use it, it will be non-NULL,
+ *    so there is no real need to check for it (wusb_dev will
+ *    dissapear before usb_dev).
+ *
+ *  - The following fields need to be filled out before calling
+ *    wusbhc_create(): ports_max, mmcies_max, mmcie_{add,rm}.
+ *
+ *  - there is no wusbhc_init() method, we do everything in
+ *    wusbhc_create().
+ *
+ *  - Creation is done in two phases, wusbhc_create() and
+ *    wusbhc_create_b(); b are the parts that need to be called after
+ *    calling usb_hcd_add(&wusbhc->usb_hcd).
+ */
+struct wusbhc {
+	struct usb_hcd usb_hcd;		/* HAS TO BE 1st */
+	struct device *dev;
+	struct uwb_rc *uwb_rc;
+	struct uwb_pal pal;
+
+	unsigned trust_timeout;			/* in jiffies */
+	struct wuie_host_info *wuie_host_info;	/* Includes CHID */
+
+	struct mutex mutex;			/* locks everything else */
+	u16 cluster_id;				/* Wireless USB Cluster ID */
+	struct wusb_port *port;			/* Fake port status handling */
+	struct wusb_dev_info *dev_info;		/* for Set Device Info mgmt */
+	u8 ports_max;
+	unsigned active:1;			/* currently xmit'ing MMCs */
+	struct wuie_keep_alive keep_alive_ie;	/* protected by mutex */
+	struct delayed_work keep_alive_timer;
+	struct list_head cack_list;		/* Connect acknowledging */
+	size_t cack_count;			/* protected by 'mutex' */
+	struct wuie_connect_ack cack_ie;
+	struct uwb_rsv *rsv;		/* cluster bandwidth reservation */
+
+	struct mutex mmcie_mutex;		/* MMC WUIE handling */
+	struct wuie_hdr **mmcie;		/* WUIE array */
+	u8 mmcies_max;
+	/* FIXME: make wusbhc_ops? */
+	int (*start)(struct wusbhc *wusbhc);
+	void (*stop)(struct wusbhc *wusbhc);
+	int (*mmcie_add)(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt,
+			 u8 handle, struct wuie_hdr *wuie);
+	int (*mmcie_rm)(struct wusbhc *wusbhc, u8 handle);
+	int (*dev_info_set)(struct wusbhc *, struct wusb_dev *wusb_dev);
+	int (*bwa_set)(struct wusbhc *wusbhc, s8 stream_index,
+		       const struct uwb_mas_bm *);
+	int (*set_ptk)(struct wusbhc *wusbhc, u8 port_idx,
+		       u32 tkid, const void *key, size_t key_size);
+	int (*set_gtk)(struct wusbhc *wusbhc,
+		       u32 tkid, const void *key, size_t key_size);
+	int (*set_num_dnts)(struct wusbhc *wusbhc, u8 interval, u8 slots);
+
+	struct {
+		struct usb_key_descriptor descr;
+		u8 data[16];				/* GTK key data */
+	} __attribute__((packed)) gtk;
+	u8 gtk_index;
+	u32 gtk_tkid;
+	struct work_struct gtk_rekey_done_work;
+	int pending_set_gtks;
+
+	struct usb_encryption_descriptor *ccm1_etd;
+};
+
+#define usb_hcd_to_wusbhc(u) container_of((u), struct wusbhc, usb_hcd)
+
+
+extern int wusbhc_create(struct wusbhc *);
+extern int wusbhc_b_create(struct wusbhc *);
+extern void wusbhc_b_destroy(struct wusbhc *);
+extern void wusbhc_destroy(struct wusbhc *);
+extern int wusb_dev_sysfs_add(struct wusbhc *, struct usb_device *,
+			      struct wusb_dev *);
+extern void wusb_dev_sysfs_rm(struct wusb_dev *);
+extern int wusbhc_sec_create(struct wusbhc *);
+extern int wusbhc_sec_start(struct wusbhc *);
+extern void wusbhc_sec_stop(struct wusbhc *);
+extern void wusbhc_sec_destroy(struct wusbhc *);
+extern void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb,
+				int status);
+void wusbhc_reset_all(struct wusbhc *wusbhc);
+
+int wusbhc_pal_register(struct wusbhc *wusbhc);
+void wusbhc_pal_unregister(struct wusbhc *wusbhc);
+
+/*
+ * Return @usb_dev's @usb_hcd (properly referenced) or NULL if gone
+ *
+ * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr)
+ *
+ * This is a safe assumption as @usb_dev->bus is referenced all the
+ * time during the @usb_dev life cycle.
+ */
+static inline struct usb_hcd *usb_hcd_get_by_usb_dev(struct usb_device *usb_dev)
+{
+	struct usb_hcd *usb_hcd;
+	usb_hcd = container_of(usb_dev->bus, struct usb_hcd, self);
+	return usb_get_hcd(usb_hcd);
+}
+
+/*
+ * Increment the reference count on a wusbhc.
+ *
+ * @wusbhc's life cycle is identical to that of the underlying usb_hcd.
+ */
+static inline struct wusbhc *wusbhc_get(struct wusbhc *wusbhc)
+{
+	return usb_get_hcd(&wusbhc->usb_hcd) ? wusbhc : NULL;
+}
+
+/*
+ * Return the wusbhc associated to a @usb_dev
+ *
+ * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr)
+ *
+ * @returns: wusbhc for @usb_dev; NULL if the @usb_dev is being torn down.
+ *           WARNING: referenced at the usb_hcd level, unlocked
+ *
+ * FIXME: move offline
+ */
+static inline struct wusbhc *wusbhc_get_by_usb_dev(struct usb_device *usb_dev)
+{
+	struct wusbhc *wusbhc = NULL;
+	struct usb_hcd *usb_hcd;
+	if (usb_dev->devnum > 1 && !usb_dev->wusb) {
+		/* but root hubs */
+		dev_err(&usb_dev->dev, "devnum %d wusb %d\n", usb_dev->devnum,
+			usb_dev->wusb);
+		BUG_ON(usb_dev->devnum > 1 && !usb_dev->wusb);
+	}
+	usb_hcd = usb_hcd_get_by_usb_dev(usb_dev);
+	if (usb_hcd == NULL)
+		return NULL;
+	BUG_ON(usb_hcd->wireless == 0);
+	return wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+}
+
+
+static inline void wusbhc_put(struct wusbhc *wusbhc)
+{
+	usb_put_hcd(&wusbhc->usb_hcd);
+}
+
+int wusbhc_start(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid);
+void wusbhc_stop(struct wusbhc *wusbhc);
+extern int wusbhc_chid_set(struct wusbhc *, const struct wusb_ckhdid *);
+
+/* Device connect handling */
+extern int wusbhc_devconnect_create(struct wusbhc *);
+extern void wusbhc_devconnect_destroy(struct wusbhc *);
+extern int wusbhc_devconnect_start(struct wusbhc *wusbhc,
+				   const struct wusb_ckhdid *chid);
+extern void wusbhc_devconnect_stop(struct wusbhc *wusbhc);
+extern int wusbhc_devconnect_auth(struct wusbhc *, u8);
+extern void wusbhc_handle_dn(struct wusbhc *, u8 srcaddr,
+			     struct wusb_dn_hdr *dn_hdr, size_t size);
+extern int wusbhc_dev_reset(struct wusbhc *wusbhc, u8 port);
+extern void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port);
+extern int wusb_usb_ncb(struct notifier_block *nb, unsigned long val,
+			void *priv);
+extern int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev,
+			     u8 addr);
+
+/* Wireless USB fake Root Hub methods */
+extern int wusbhc_rh_create(struct wusbhc *);
+extern void wusbhc_rh_destroy(struct wusbhc *);
+
+extern int wusbhc_rh_status_data(struct usb_hcd *, char *);
+extern int wusbhc_rh_control(struct usb_hcd *, u16, u16, u16, char *, u16);
+extern int wusbhc_rh_suspend(struct usb_hcd *);
+extern int wusbhc_rh_resume(struct usb_hcd *);
+extern int wusbhc_rh_start_port_reset(struct usb_hcd *, unsigned);
+
+/* MMC handling */
+extern int wusbhc_mmcie_create(struct wusbhc *);
+extern void wusbhc_mmcie_destroy(struct wusbhc *);
+extern int wusbhc_mmcie_set(struct wusbhc *, u8 interval, u8 repeat_cnt,
+			    struct wuie_hdr *);
+extern void wusbhc_mmcie_rm(struct wusbhc *, struct wuie_hdr *);
+
+/* Bandwidth reservation */
+int wusbhc_rsv_establish(struct wusbhc *wusbhc);
+void wusbhc_rsv_terminate(struct wusbhc *wusbhc);
+
+/*
+ * I've always said
+ * I wanted a wedding in a church...
+ *
+ * but lately I've been thinking about
+ * the Botanical Gardens.
+ *
+ * We could do it by the tulips.
+ * It'll be beautiful
+ *
+ * --Security!
+ */
+extern int wusb_dev_sec_add(struct wusbhc *, struct usb_device *,
+				struct wusb_dev *);
+extern void wusb_dev_sec_rm(struct wusb_dev *) ;
+extern int wusb_dev_4way_handshake(struct wusbhc *, struct wusb_dev *,
+				   struct wusb_ckhdid *ck);
+void wusbhc_gtk_rekey(struct wusbhc *wusbhc);
+
+
+/* WUSB Cluster ID handling */
+extern u8 wusb_cluster_id_get(void);
+extern void wusb_cluster_id_put(u8);
+
+/*
+ * wusb_port_by_idx - return the port associated to a zero-based port index
+ *
+ * NOTE: valid without locking as long as wusbhc is referenced (as the
+ *       number of ports doesn't change). The data pointed to has to
+ *       be verified though :)
+ */
+static inline struct wusb_port *wusb_port_by_idx(struct wusbhc *wusbhc,
+						 u8 port_idx)
+{
+	return &wusbhc->port[port_idx];
+}
+
+/*
+ * wusb_port_no_to_idx - Convert port number (per usb_dev->portnum) to
+ * a port_idx.
+ *
+ * USB stack USB ports are 1 based!!
+ *
+ * NOTE: only valid for WUSB devices!!!
+ */
+static inline u8 wusb_port_no_to_idx(u8 port_no)
+{
+	return port_no - 1;
+}
+
+extern struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *,
+						  struct usb_device *);
+
+/*
+ * Return a referenced wusb_dev given a @usb_dev
+ *
+ * Returns NULL if the usb_dev is being torn down.
+ *
+ * FIXME: move offline
+ */
+static inline
+struct wusb_dev *wusb_dev_get_by_usb_dev(struct usb_device *usb_dev)
+{
+	struct wusbhc *wusbhc;
+	struct wusb_dev *wusb_dev;
+	wusbhc = wusbhc_get_by_usb_dev(usb_dev);
+	if (wusbhc == NULL)
+		return NULL;
+	mutex_lock(&wusbhc->mutex);
+	wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev);
+	mutex_unlock(&wusbhc->mutex);
+	wusbhc_put(wusbhc);
+	return wusb_dev;
+}
+
+/* Misc */
+
+extern struct workqueue_struct *wusbd;
+#endif /* #ifndef __WUSBHC_H__ */
diff --git a/drivers/uwb/Kconfig b/drivers/uwb/Kconfig
new file mode 100644
index 0000000..ca78312
--- /dev/null
+++ b/drivers/uwb/Kconfig
@@ -0,0 +1,90 @@
+#
+# UWB device configuration
+#
+
+menuconfig UWB
+	tristate "Ultra Wideband devices (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on PCI
+	default n
+	help
+	  UWB is a high-bandwidth, low-power, point-to-point radio
+	  technology using a wide spectrum (3.1-10.6GHz). It is
+	  optimized for in-room use (480Mbps at 2 meters, 110Mbps at
+	  10m). It serves as the transport layer for other protocols,
+	  such as Wireless USB (WUSB), IP (WLP) and upcoming
+	  Bluetooth and 1394
+
+	  The topology is peer to peer; however, higher level
+	  protocols (such as WUSB) might impose a master/slave
+	  relationship.
+
+	  Say Y here if your computer has UWB radio controllers (USB or PCI)
+	  based. You will need to enable the radio controllers
+	  below.  It is ok to select all of them, no harm done.
+
+	  For more help check the UWB and WUSB related files in
+	  <file:Documentation/usb/>.
+
+	  To compile the UWB stack as a module, choose M here.
+
+if UWB
+
+config UWB_HWA
+	tristate "UWB Radio Control driver for WUSB-compliant USB dongles (HWA)"
+	depends on USB
+	help
+	  This driver enables the radio controller for HWA USB
+	  devices. HWA stands for Host Wire Adapter, and it is a UWB
+	  Radio Controller connected to your system via USB. Most of
+	  them come with a Wireless USB host controller also.
+
+	  To compile this driver select Y (built in) or M (module). It
+	  is safe to select any even if you do not have the hardware.
+
+config UWB_WHCI
+        tristate "UWB Radio Control driver for WHCI-compliant cards"
+        depends on PCI
+        help
+          This driver enables the radio controller for WHCI cards.
+
+          WHCI is an specification developed by Intel
+          (http://www.intel.com/technology/comms/wusb/whci.htm) much
+          in the spirit of USB's EHCI, but for UWB and Wireless USB
+          radio/host controllers connected via memmory mapping (eg:
+          PCI). Most of these cards come also with a Wireless USB host
+          controller.
+
+          To compile this driver select Y (built in) or M (module). It
+          is safe to select any even if you do not have the hardware.
+
+config UWB_WLP
+	tristate "Support WiMedia Link Protocol (Ethernet/IP over UWB)"
+	depends on UWB && NET
+	help
+	  This is a common library for drivers that implement
+	  networking over UWB.
+
+config UWB_I1480U
+        tristate "Support for Intel Wireless UWB Link 1480 HWA"
+        depends on UWB_HWA
+        select FW_LOADER
+        help
+         This driver enables support for the i1480 when connected via
+         USB. It consists of a firmware uploader that will enable it
+         to behave as an HWA device.
+
+         To compile this driver select Y (built in) or M (module). It
+         is safe to select any even if you do not have the hardware.
+
+config UWB_I1480U_WLP
+        tristate "Support for Intel Wireless UWB Link 1480 HWA's WLP interface"
+        depends on UWB_I1480U &&  UWB_WLP && NET
+        help
+         This driver enables WLP support for the i1480 when connected via
+         USB. WLP is the WiMedia Link Protocol, or IP over UWB.
+
+         To compile this driver select Y (built in) or M (module). It
+         is safe to select any even if you don't have the hardware.
+
+endif # UWB
diff --git a/drivers/uwb/Makefile b/drivers/uwb/Makefile
new file mode 100644
index 0000000..257e690
--- /dev/null
+++ b/drivers/uwb/Makefile
@@ -0,0 +1,29 @@
+obj-$(CONFIG_UWB)		+= uwb.o
+obj-$(CONFIG_UWB_WLP)		+= wlp/
+obj-$(CONFIG_UWB_WHCI)		+= umc.o whci.o whc-rc.o
+obj-$(CONFIG_UWB_HWA)		+= hwa-rc.o
+obj-$(CONFIG_UWB_I1480U)	+= i1480/
+
+uwb-objs :=		\
+	address.o	\
+	beacon.o	\
+	driver.o	\
+	drp.o		\
+	drp-avail.o	\
+	drp-ie.o	\
+	est.o		\
+	ie.o		\
+	lc-dev.o	\
+	lc-rc.o		\
+	neh.o		\
+	pal.o		\
+	reset.o		\
+	rsv.o		\
+	scan.o		\
+	uwb-debug.o	\
+	uwbd.o
+
+umc-objs :=		\
+	umc-bus.o	\
+	umc-dev.o	\
+	umc-drv.o
diff --git a/drivers/uwb/address.c b/drivers/uwb/address.c
new file mode 100644
index 0000000..1664ae5
--- /dev/null
+++ b/drivers/uwb/address.c
@@ -0,0 +1,374 @@
+/*
+ * Ultra Wide Band
+ * Address management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/random.h>
+#include <linux/etherdevice.h>
+#include <linux/uwb/debug.h>
+#include "uwb-internal.h"
+
+
+/** Device Address Management command */
+struct uwb_rc_cmd_dev_addr_mgmt {
+	struct uwb_rccb rccb;
+	u8 bmOperationType;
+	u8 baAddr[6];
+} __attribute__((packed));
+
+
+/**
+ * Low level command for setting/getting UWB radio's addresses
+ *
+ * @hwarc:	HWA Radio Control interface instance
+ * @bmOperationType:
+ * 		Set/get, MAC/DEV (see WUSB1.0[8.6.2.2])
+ * @baAddr:	address buffer--assumed to have enough data to hold
+ *              the address type requested.
+ * @reply:	Pointer to reply buffer (can be stack allocated)
+ * @returns:	0 if ok, < 0 errno code on error.
+ *
+ * @cmd has to be allocated because USB cannot grok USB or vmalloc
+ * buffers depending on your combination of host architecture.
+ */
+static
+int uwb_rc_dev_addr_mgmt(struct uwb_rc *rc,
+			 u8 bmOperationType, const u8 *baAddr,
+			 struct uwb_rc_evt_dev_addr_mgmt *reply)
+{
+	int result;
+	struct uwb_rc_cmd_dev_addr_mgmt *cmd;
+
+	result = -ENOMEM;
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		goto error_kzalloc;
+	cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
+	cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_DEV_ADDR_MGMT);
+	cmd->bmOperationType = bmOperationType;
+	if (baAddr) {
+		size_t size = 0;
+		switch (bmOperationType >> 1) {
+		case 0:	size = 2; break;
+		case 1:	size = 6; break;
+		default: BUG();
+		}
+		memcpy(cmd->baAddr, baAddr, size);
+	}
+	reply->rceb.bEventType = UWB_RC_CET_GENERAL;
+	reply->rceb.wEvent = UWB_RC_CMD_DEV_ADDR_MGMT;
+	result = uwb_rc_cmd(rc, "DEV-ADDR-MGMT",
+			    &cmd->rccb, sizeof(*cmd),
+			    &reply->rceb, sizeof(*reply));
+	if (result < 0)
+		goto error_cmd;
+	if (result < sizeof(*reply)) {
+		dev_err(&rc->uwb_dev.dev,
+			"DEV-ADDR-MGMT: not enough data replied: "
+			"%d vs %zu bytes needed\n", result, sizeof(*reply));
+		result = -ENOMSG;
+	} else if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(&rc->uwb_dev.dev,
+			"DEV-ADDR-MGMT: command execution failed: %s (%d)\n",
+			uwb_rc_strerror(reply->bResultCode),
+			reply->bResultCode);
+		result = -EIO;
+	} else
+		result = 0;
+error_cmd:
+	kfree(cmd);
+error_kzalloc:
+	return result;
+}
+
+
+/**
+ * Set the UWB RC MAC or device address.
+ *
+ * @rc:      UWB Radio Controller
+ * @_addr:   Pointer to address to write [assumed to be either a
+ *           'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *'].
+ * @type:    Type of address to set (UWB_ADDR_DEV or UWB_ADDR_MAC).
+ * @returns: 0 if ok, < 0 errno code on error.
+ *
+ * Some anal retentivity here: even if both 'struct
+ * uwb_{dev,mac}_addr' have the actual byte array in the same offset
+ * and I could just pass _addr to hwarc_cmd_dev_addr_mgmt(), I prefer
+ * to use some syntatic sugar in case someday we decide to change the
+ * format of the structs. The compiler will optimize it out anyway.
+ */
+static int uwb_rc_addr_set(struct uwb_rc *rc,
+		    const void *_addr, enum uwb_addr_type type)
+{
+	int result;
+	u8 bmOperationType = 0x1; 		/* Set address */
+	const struct uwb_dev_addr *dev_addr = _addr;
+	const struct uwb_mac_addr *mac_addr = _addr;
+	struct uwb_rc_evt_dev_addr_mgmt reply;
+	const u8 *baAddr;
+
+	result = -EINVAL;
+	switch (type) {
+	case UWB_ADDR_DEV:
+		baAddr = dev_addr->data;
+		break;
+	case UWB_ADDR_MAC:
+		baAddr = mac_addr->data;
+		bmOperationType |= 0x2;
+		break;
+	default:
+		return result;
+	}
+	return uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &reply);
+}
+
+
+/**
+ * Get the UWB radio's MAC or device address.
+ *
+ * @rc:      UWB Radio Controller
+ * @_addr:   Where to write the address data [assumed to be either a
+ *           'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *'].
+ * @type:    Type of address to get (UWB_ADDR_DEV or UWB_ADDR_MAC).
+ * @returns: 0 if ok (and *_addr set), < 0 errno code on error.
+ *
+ * See comment in uwb_rc_addr_set() about anal retentivity in the
+ * type handling of the address variables.
+ */
+static int uwb_rc_addr_get(struct uwb_rc *rc,
+		    void *_addr, enum uwb_addr_type type)
+{
+	int result;
+	u8 bmOperationType = 0x0; 		/* Get address */
+	struct uwb_rc_evt_dev_addr_mgmt evt;
+	struct uwb_dev_addr *dev_addr = _addr;
+	struct uwb_mac_addr *mac_addr = _addr;
+	u8 *baAddr;
+
+	result = -EINVAL;
+	switch (type) {
+	case UWB_ADDR_DEV:
+		baAddr = dev_addr->data;
+		break;
+	case UWB_ADDR_MAC:
+		bmOperationType |= 0x2;
+		baAddr = mac_addr->data;
+		break;
+	default:
+		return result;
+	}
+	result = uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &evt);
+	if (result == 0)
+		switch (type) {
+		case UWB_ADDR_DEV:
+			memcpy(&dev_addr->data, evt.baAddr,
+			       sizeof(dev_addr->data));
+			break;
+		case UWB_ADDR_MAC:
+			memcpy(&mac_addr->data, evt.baAddr,
+			       sizeof(mac_addr->data));
+			break;
+		default:		/* shut gcc up */
+			BUG();
+		}
+	return result;
+}
+
+
+/** Get @rc's MAC address to @addr */
+int uwb_rc_mac_addr_get(struct uwb_rc *rc,
+			struct uwb_mac_addr *addr) {
+	return uwb_rc_addr_get(rc, addr, UWB_ADDR_MAC);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_mac_addr_get);
+
+
+/** Get @rc's device address to @addr */
+int uwb_rc_dev_addr_get(struct uwb_rc *rc,
+			struct uwb_dev_addr *addr) {
+	return uwb_rc_addr_get(rc, addr, UWB_ADDR_DEV);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_dev_addr_get);
+
+
+/** Set @rc's address to @addr */
+int uwb_rc_mac_addr_set(struct uwb_rc *rc,
+			const struct uwb_mac_addr *addr)
+{
+	int result = -EINVAL;
+	mutex_lock(&rc->uwb_dev.mutex);
+	result = uwb_rc_addr_set(rc, addr, UWB_ADDR_MAC);
+	mutex_unlock(&rc->uwb_dev.mutex);
+	return result;
+}
+
+
+/** Set @rc's address to @addr */
+int uwb_rc_dev_addr_set(struct uwb_rc *rc,
+			const struct uwb_dev_addr *addr)
+{
+	int result = -EINVAL;
+	mutex_lock(&rc->uwb_dev.mutex);
+	result = uwb_rc_addr_set(rc, addr, UWB_ADDR_DEV);
+	rc->uwb_dev.dev_addr = *addr;
+	mutex_unlock(&rc->uwb_dev.mutex);
+	return result;
+}
+
+/* Returns !0 if given address is already assigned to device. */
+int __uwb_mac_addr_assigned_check(struct device *dev, void *_addr)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_mac_addr *addr = _addr;
+
+	if (!uwb_mac_addr_cmp(addr, &uwb_dev->mac_addr))
+		return !0;
+	return 0;
+}
+
+/* Returns !0 if given address is already assigned to device. */
+int __uwb_dev_addr_assigned_check(struct device *dev, void *_addr)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_dev_addr *addr = _addr;
+	if (!uwb_dev_addr_cmp(addr, &uwb_dev->dev_addr))
+		return !0;
+	return 0;
+}
+
+/**
+ * uwb_dev_addr_assign - assigned a generated DevAddr to a radio controller
+ * @rc:      the (local) radio controller device requiring a new DevAddr
+ *
+ * A new DevAddr is required when:
+ *    - first setting up a radio controller
+ *    - if the hardware reports a DevAddr conflict
+ *
+ * The DevAddr is randomly generated in the generated DevAddr range
+ * [0x100, 0xfeff]. The number of devices in a beacon group is limited
+ * by mMaxBPLength (96) so this address space will never be exhausted.
+ *
+ * [ECMA-368] 17.1.1, 17.16.
+ */
+int uwb_rc_dev_addr_assign(struct uwb_rc *rc)
+{
+	struct uwb_dev_addr new_addr;
+
+	do {
+		get_random_bytes(new_addr.data, sizeof(new_addr.data));
+	} while (new_addr.data[0] == 0x00 || new_addr.data[0] == 0xff
+		 || __uwb_dev_addr_assigned(rc, &new_addr));
+
+	return uwb_rc_dev_addr_set(rc, &new_addr);
+}
+
+/**
+ * uwbd_evt_handle_rc_dev_addr_conflict - handle a DEV_ADDR_CONFLICT event
+ * @evt: the DEV_ADDR_CONFLICT notification from the radio controller
+ *
+ * A new (non-conflicting) DevAddr is assigned to the radio controller.
+ *
+ * [ECMA-368] 17.1.1.1.
+ */
+int uwbd_evt_handle_rc_dev_addr_conflict(struct uwb_event *evt)
+{
+	struct uwb_rc *rc = evt->rc;
+
+	return uwb_rc_dev_addr_assign(rc);
+}
+
+/*
+ * Print the 48-bit EUI MAC address of the radio controller when
+ * reading /sys/class/uwb_rc/XX/mac_address
+ */
+static ssize_t uwb_rc_mac_addr_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_rc *rc = uwb_dev->rc;
+	struct uwb_mac_addr addr;
+	ssize_t result;
+
+	mutex_lock(&rc->uwb_dev.mutex);
+	result = uwb_rc_addr_get(rc, &addr, UWB_ADDR_MAC);
+	mutex_unlock(&rc->uwb_dev.mutex);
+	if (result >= 0) {
+		result = uwb_mac_addr_print(buf, UWB_ADDR_STRSIZE, &addr);
+		buf[result++] = '\n';
+	}
+	return result;
+}
+
+/*
+ * Parse a 48 bit address written to /sys/class/uwb_rc/XX/mac_address
+ * and if correct, set it.
+ */
+static ssize_t uwb_rc_mac_addr_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t size)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_rc *rc = uwb_dev->rc;
+	struct uwb_mac_addr addr;
+	ssize_t result;
+
+	result = sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx\n",
+			&addr.data[0], &addr.data[1], &addr.data[2],
+			&addr.data[3], &addr.data[4], &addr.data[5]);
+	if (result != 6) {
+		result = -EINVAL;
+		goto out;
+	}
+	if (is_multicast_ether_addr(addr.data)) {
+		dev_err(&rc->uwb_dev.dev, "refusing to set multicast "
+			"MAC address %s\n", buf);
+		result = -EINVAL;
+		goto out;
+	}
+	result = uwb_rc_mac_addr_set(rc, &addr);
+	if (result == 0)
+		rc->uwb_dev.mac_addr = addr;
+out:
+	return result < 0 ? result : size;
+}
+DEVICE_ATTR(mac_address, S_IRUGO | S_IWUSR, uwb_rc_mac_addr_show, uwb_rc_mac_addr_store);
+
+/** Print @addr to @buf, @return bytes written */
+size_t __uwb_addr_print(char *buf, size_t buf_size, const unsigned char *addr,
+			int type)
+{
+	size_t result;
+	if (type)
+		result = scnprintf(buf, buf_size,
+				  "%02x:%02x:%02x:%02x:%02x:%02x",
+				  addr[0], addr[1], addr[2],
+				  addr[3], addr[4], addr[5]);
+	else
+		result = scnprintf(buf, buf_size, "%02x:%02x",
+				  addr[1], addr[0]);
+	return result;
+}
+EXPORT_SYMBOL_GPL(__uwb_addr_print);
diff --git a/drivers/uwb/beacon.c b/drivers/uwb/beacon.c
new file mode 100644
index 0000000..46b18ee
--- /dev/null
+++ b/drivers/uwb/beacon.c
@@ -0,0 +1,642 @@
+/*
+ * Ultra Wide Band
+ * Beacon management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kdev_t.h>
+#include "uwb-internal.h"
+
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+/** Start Beaconing command structure */
+struct uwb_rc_cmd_start_beacon {
+	struct uwb_rccb rccb;
+	__le16 wBPSTOffset;
+	u8 bChannelNumber;
+} __attribute__((packed));
+
+
+static int uwb_rc_start_beacon(struct uwb_rc *rc, u16 bpst_offset, u8 channel)
+{
+	int result;
+	struct uwb_rc_cmd_start_beacon *cmd;
+	struct uwb_rc_evt_confirm reply;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+	cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
+	cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_START_BEACON);
+	cmd->wBPSTOffset = cpu_to_le16(bpst_offset);
+	cmd->bChannelNumber = channel;
+	reply.rceb.bEventType = UWB_RC_CET_GENERAL;
+	reply.rceb.wEvent = UWB_RC_CMD_START_BEACON;
+	result = uwb_rc_cmd(rc, "START-BEACON", &cmd->rccb, sizeof(*cmd),
+			    &reply.rceb, sizeof(reply));
+	if (result < 0)
+		goto error_cmd;
+	if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(&rc->uwb_dev.dev,
+			"START-BEACON: command execution failed: %s (%d)\n",
+			uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
+		result = -EIO;
+	}
+error_cmd:
+	kfree(cmd);
+	return result;
+}
+
+static int uwb_rc_stop_beacon(struct uwb_rc *rc)
+{
+	int result;
+	struct uwb_rccb *cmd;
+	struct uwb_rc_evt_confirm reply;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+	cmd->bCommandType = UWB_RC_CET_GENERAL;
+	cmd->wCommand = cpu_to_le16(UWB_RC_CMD_STOP_BEACON);
+	reply.rceb.bEventType = UWB_RC_CET_GENERAL;
+	reply.rceb.wEvent = UWB_RC_CMD_STOP_BEACON;
+	result = uwb_rc_cmd(rc, "STOP-BEACON", cmd, sizeof(*cmd),
+			    &reply.rceb, sizeof(reply));
+	if (result < 0)
+		goto error_cmd;
+	if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(&rc->uwb_dev.dev,
+			"STOP-BEACON: command execution failed: %s (%d)\n",
+			uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
+		result = -EIO;
+	}
+error_cmd:
+	kfree(cmd);
+	return result;
+}
+
+/*
+ * Start/stop beacons
+ *
+ * @rc:          UWB Radio Controller to operate on
+ * @channel:     UWB channel on which to beacon (WUSB[table
+ *               5-12]). If -1, stop beaconing.
+ * @bpst_offset: Beacon Period Start Time offset; FIXME-do zero
+ *
+ * According to WHCI 0.95 [4.13.6] the driver will only receive the RCEB
+ * of a SET IE command after the device sent the first beacon that includes
+ * the IEs specified in the SET IE command. So, after we start beaconing we
+ * check if there is anything in the IE cache and call the SET IE command
+ * if needed.
+ */
+int uwb_rc_beacon(struct uwb_rc *rc, int channel, unsigned bpst_offset)
+{
+	int result;
+	struct device *dev = &rc->uwb_dev.dev;
+
+	mutex_lock(&rc->uwb_dev.mutex);
+	if (channel < 0)
+		channel = -1;
+	if (channel == -1)
+		result = uwb_rc_stop_beacon(rc);
+	else {
+		/* channel >= 0...dah */
+		result = uwb_rc_start_beacon(rc, bpst_offset, channel);
+		if (result < 0)
+			goto out_up;
+		if (le16_to_cpu(rc->ies->wIELength) > 0) {
+			result = uwb_rc_set_ie(rc, rc->ies);
+			if (result < 0) {
+				dev_err(dev, "Cannot set new IE on device: "
+					"%d\n", result);
+				result = uwb_rc_stop_beacon(rc);
+				channel = -1;
+				bpst_offset = 0;
+			} else
+				result = 0;
+		}
+	}
+
+	if (result < 0)
+		goto out_up;
+	rc->beaconing = channel;
+
+	uwb_notify(rc, NULL, uwb_bg_joined(rc) ? UWB_NOTIF_BG_JOIN : UWB_NOTIF_BG_LEAVE);
+
+out_up:
+	mutex_unlock(&rc->uwb_dev.mutex);
+	return result;
+}
+
+/*
+ * Beacon cache
+ *
+ * The purpose of this is to speed up the lookup of becon information
+ * when a new beacon arrives. The UWB Daemon uses it also to keep a
+ * tab of which devices are in radio distance and which not. When a
+ * device's beacon stays present for more than a certain amount of
+ * time, it is considered a new, usable device. When a beacon ceases
+ * to be received for a certain amount of time, it is considered that
+ * the device is gone.
+ *
+ * FIXME: use an allocator for the entries
+ * FIXME: use something faster for search than a list
+ */
+
+struct uwb_beca uwb_beca = {
+	.list = LIST_HEAD_INIT(uwb_beca.list),
+	.mutex = __MUTEX_INITIALIZER(uwb_beca.mutex)
+};
+
+
+void uwb_bce_kfree(struct kref *_bce)
+{
+	struct uwb_beca_e *bce = container_of(_bce, struct uwb_beca_e, refcnt);
+
+	kfree(bce->be);
+	kfree(bce);
+}
+
+
+/* Find a beacon by dev addr in the cache */
+static
+struct uwb_beca_e *__uwb_beca_find_bydev(const struct uwb_dev_addr *dev_addr)
+{
+	struct uwb_beca_e *bce, *next;
+	list_for_each_entry_safe(bce, next, &uwb_beca.list, node) {
+		d_printf(6, NULL, "looking for addr %02x:%02x in %02x:%02x\n",
+			 dev_addr->data[0], dev_addr->data[1],
+			 bce->dev_addr.data[0], bce->dev_addr.data[1]);
+		if (!memcmp(&bce->dev_addr, dev_addr, sizeof(bce->dev_addr)))
+			goto out;
+	}
+	bce = NULL;
+out:
+	return bce;
+}
+
+/* Find a beacon by dev addr in the cache */
+static
+struct uwb_beca_e *__uwb_beca_find_bymac(const struct uwb_mac_addr *mac_addr)
+{
+	struct uwb_beca_e *bce, *next;
+	list_for_each_entry_safe(bce, next, &uwb_beca.list, node) {
+		if (!memcmp(bce->mac_addr, mac_addr->data,
+			    sizeof(struct uwb_mac_addr)))
+			goto out;
+	}
+	bce = NULL;
+out:
+	return bce;
+}
+
+/**
+ * uwb_dev_get_by_devaddr - get a UWB device with a specific DevAddr
+ * @rc:      the radio controller that saw the device
+ * @devaddr: DevAddr of the UWB device to find
+ *
+ * There may be more than one matching device (in the case of a
+ * DevAddr conflict), but only the first one is returned.
+ */
+struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc,
+				       const struct uwb_dev_addr *devaddr)
+{
+	struct uwb_dev *found = NULL;
+	struct uwb_beca_e *bce;
+
+	mutex_lock(&uwb_beca.mutex);
+	bce = __uwb_beca_find_bydev(devaddr);
+	if (bce)
+		found = uwb_dev_try_get(rc, bce->uwb_dev);
+	mutex_unlock(&uwb_beca.mutex);
+
+	return found;
+}
+
+/**
+ * uwb_dev_get_by_macaddr - get a UWB device with a specific EUI-48
+ * @rc:      the radio controller that saw the device
+ * @devaddr: EUI-48 of the UWB device to find
+ */
+struct uwb_dev *uwb_dev_get_by_macaddr(struct uwb_rc *rc,
+				       const struct uwb_mac_addr *macaddr)
+{
+	struct uwb_dev *found = NULL;
+	struct uwb_beca_e *bce;
+
+	mutex_lock(&uwb_beca.mutex);
+	bce = __uwb_beca_find_bymac(macaddr);
+	if (bce)
+		found = uwb_dev_try_get(rc, bce->uwb_dev);
+	mutex_unlock(&uwb_beca.mutex);
+
+	return found;
+}
+
+/* Initialize a beacon cache entry */
+static void uwb_beca_e_init(struct uwb_beca_e *bce)
+{
+	mutex_init(&bce->mutex);
+	kref_init(&bce->refcnt);
+	stats_init(&bce->lqe_stats);
+	stats_init(&bce->rssi_stats);
+}
+
+/*
+ * Add a beacon to the cache
+ *
+ * @be:         Beacon event information
+ * @bf:         Beacon frame (part of b, really)
+ * @ts_jiffies: Timestamp (in jiffies) when the beacon was received
+ */
+struct uwb_beca_e *__uwb_beca_add(struct uwb_rc_evt_beacon *be,
+				  struct uwb_beacon_frame *bf,
+				  unsigned long ts_jiffies)
+{
+	struct uwb_beca_e *bce;
+
+	bce = kzalloc(sizeof(*bce), GFP_KERNEL);
+	if (bce == NULL)
+		return NULL;
+	uwb_beca_e_init(bce);
+	bce->ts_jiffies = ts_jiffies;
+	bce->uwb_dev = NULL;
+	list_add(&bce->node, &uwb_beca.list);
+	return bce;
+}
+
+/*
+ * Wipe out beacon entries that became stale
+ *
+ * Remove associated devicest too.
+ */
+void uwb_beca_purge(void)
+{
+	struct uwb_beca_e *bce, *next;
+	unsigned long expires;
+
+	mutex_lock(&uwb_beca.mutex);
+	list_for_each_entry_safe(bce, next, &uwb_beca.list, node) {
+		expires = bce->ts_jiffies + msecs_to_jiffies(beacon_timeout_ms);
+		if (time_after(jiffies, expires)) {
+			uwbd_dev_offair(bce);
+			list_del(&bce->node);
+			uwb_bce_put(bce);
+		}
+	}
+	mutex_unlock(&uwb_beca.mutex);
+}
+
+/* Clean up the whole beacon cache. Called on shutdown */
+void uwb_beca_release(void)
+{
+	struct uwb_beca_e *bce, *next;
+	mutex_lock(&uwb_beca.mutex);
+	list_for_each_entry_safe(bce, next, &uwb_beca.list, node) {
+		list_del(&bce->node);
+		uwb_bce_put(bce);
+	}
+	mutex_unlock(&uwb_beca.mutex);
+}
+
+static void uwb_beacon_print(struct uwb_rc *rc, struct uwb_rc_evt_beacon *be,
+			     struct uwb_beacon_frame *bf)
+{
+	char macbuf[UWB_ADDR_STRSIZE];
+	char devbuf[UWB_ADDR_STRSIZE];
+	char dstbuf[UWB_ADDR_STRSIZE];
+
+	uwb_mac_addr_print(macbuf, sizeof(macbuf), &bf->Device_Identifier);
+	uwb_dev_addr_print(devbuf, sizeof(devbuf), &bf->hdr.SrcAddr);
+	uwb_dev_addr_print(dstbuf, sizeof(dstbuf), &bf->hdr.DestAddr);
+	dev_info(&rc->uwb_dev.dev,
+		 "BEACON from %s to %s (ch%u offset %u slot %u MAC %s)\n",
+		 devbuf, dstbuf, be->bChannelNumber, be->wBPSTOffset,
+		 bf->Beacon_Slot_Number, macbuf);
+}
+
+/*
+ * @bce: beacon cache entry, referenced
+ */
+ssize_t uwb_bce_print_IEs(struct uwb_dev *uwb_dev, struct uwb_beca_e *bce,
+			  char *buf, size_t size)
+{
+	ssize_t result = 0;
+	struct uwb_rc_evt_beacon *be;
+	struct uwb_beacon_frame *bf;
+	struct uwb_buf_ctx ctx = {
+		.buf = buf,
+		.bytes = 0,
+		.size = size
+	};
+
+	mutex_lock(&bce->mutex);
+	be = bce->be;
+	if (be == NULL)
+		goto out;
+	bf = (void *) be->BeaconInfo;
+	uwb_ie_for_each(uwb_dev, uwb_ie_dump_hex, &ctx,
+			bf->IEData, be->wBeaconInfoLength - sizeof(*bf));
+	result = ctx.bytes;
+out:
+	mutex_unlock(&bce->mutex);
+	return result;
+}
+
+/*
+ * Verify that the beacon event, frame and IEs are ok
+ */
+static int uwb_verify_beacon(struct uwb_rc *rc, struct uwb_event *evt,
+			     struct uwb_rc_evt_beacon *be)
+{
+	int result = -EINVAL;
+	struct uwb_beacon_frame *bf;
+	struct device *dev = &rc->uwb_dev.dev;
+
+	/* Is there enough data to decode a beacon frame? */
+	if (evt->notif.size < sizeof(*be) + sizeof(*bf)) {
+		dev_err(dev, "BEACON event: Not enough data to decode "
+			"(%zu vs %zu bytes needed)\n", evt->notif.size,
+			sizeof(*be) + sizeof(*bf));
+		goto error;
+	}
+	/* FIXME: make sure beacon frame IEs are fine and that the whole thing
+	 * is consistent */
+	result = 0;
+error:
+	return result;
+}
+
+/*
+ * Handle UWB_RC_EVT_BEACON events
+ *
+ * We check the beacon cache to see how the received beacon fares. If
+ * is there already we refresh the timestamp. If not we create a new
+ * entry.
+ *
+ * According to the WHCI and WUSB specs, only one beacon frame is
+ * allowed per notification block, so we don't bother about scanning
+ * for more.
+ */
+int uwbd_evt_handle_rc_beacon(struct uwb_event *evt)
+{
+	int result = -EINVAL;
+	struct uwb_rc *rc;
+	struct uwb_rc_evt_beacon *be;
+	struct uwb_beacon_frame *bf;
+	struct uwb_beca_e *bce;
+	unsigned long last_ts;
+
+	rc = evt->rc;
+	be = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon, rceb);
+	result = uwb_verify_beacon(rc, evt, be);
+	if (result < 0)
+		return result;
+
+	/* FIXME: handle alien beacons. */
+	if (be->bBeaconType == UWB_RC_BEACON_TYPE_OL_ALIEN ||
+	    be->bBeaconType == UWB_RC_BEACON_TYPE_NOL_ALIEN) {
+		return -ENOSYS;
+	}
+
+	bf = (struct uwb_beacon_frame *) be->BeaconInfo;
+
+	/*
+	 * Drop beacons from devices with a NULL EUI-48 -- they cannot
+	 * be uniquely identified.
+	 *
+	 * It's expected that these will all be WUSB devices and they
+	 * have a WUSB specific connection method so ignoring them
+	 * here shouldn't be a problem.
+	 */
+	if (uwb_mac_addr_bcast(&bf->Device_Identifier))
+		return 0;
+
+	mutex_lock(&uwb_beca.mutex);
+	bce = __uwb_beca_find_bymac(&bf->Device_Identifier);
+	if (bce == NULL) {
+		/* Not in there, a new device is pinging */
+		uwb_beacon_print(evt->rc, be, bf);
+		bce = __uwb_beca_add(be, bf, evt->ts_jiffies);
+		if (bce == NULL) {
+			mutex_unlock(&uwb_beca.mutex);
+			return -ENOMEM;
+		}
+	}
+	mutex_unlock(&uwb_beca.mutex);
+
+	mutex_lock(&bce->mutex);
+	/* purge old beacon data */
+	kfree(bce->be);
+
+	last_ts = bce->ts_jiffies;
+
+	/* Update commonly used fields */
+	bce->ts_jiffies = evt->ts_jiffies;
+	bce->be = be;
+	bce->dev_addr = bf->hdr.SrcAddr;
+	bce->mac_addr = &bf->Device_Identifier;
+	be->wBPSTOffset = le16_to_cpu(be->wBPSTOffset);
+	be->wBeaconInfoLength = le16_to_cpu(be->wBeaconInfoLength);
+	stats_add_sample(&bce->lqe_stats, be->bLQI - 7);
+	stats_add_sample(&bce->rssi_stats, be->bRSSI + 18);
+
+	/*
+	 * This might be a beacon from a new device.
+	 */
+	if (bce->uwb_dev == NULL)
+		uwbd_dev_onair(evt->rc, bce);
+
+	mutex_unlock(&bce->mutex);
+
+	return 1; /* we keep the event data */
+}
+
+/*
+ * Handle UWB_RC_EVT_BEACON_SIZE events
+ *
+ * XXXXX
+ */
+int uwbd_evt_handle_rc_beacon_size(struct uwb_event *evt)
+{
+	int result = -EINVAL;
+	struct device *dev = &evt->rc->uwb_dev.dev;
+	struct uwb_rc_evt_beacon_size *bs;
+
+	/* Is there enough data to decode the event? */
+	if (evt->notif.size < sizeof(*bs)) {
+		dev_err(dev, "BEACON SIZE notification: Not enough data to "
+			"decode (%zu vs %zu bytes needed)\n",
+			evt->notif.size, sizeof(*bs));
+		goto error;
+	}
+	bs = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon_size, rceb);
+	if (0)
+		dev_info(dev, "Beacon size changed to %u bytes "
+			"(FIXME: action?)\n", le16_to_cpu(bs->wNewBeaconSize));
+	else {
+		/* temporary hack until we do something with this message... */
+		static unsigned count;
+		if (++count % 1000 == 0)
+			dev_info(dev, "Beacon size changed %u times "
+				"(FIXME: action?)\n", count);
+	}
+	result = 0;
+error:
+	return result;
+}
+
+/**
+ * uwbd_evt_handle_rc_bp_slot_change - handle a BP_SLOT_CHANGE event
+ * @evt: the BP_SLOT_CHANGE notification from the radio controller
+ *
+ * If the event indicates that no beacon period slots were available
+ * then radio controller has transitioned to a non-beaconing state.
+ * Otherwise, simply save the current beacon slot.
+ */
+int uwbd_evt_handle_rc_bp_slot_change(struct uwb_event *evt)
+{
+	struct uwb_rc *rc = evt->rc;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_rc_evt_bp_slot_change *bpsc;
+
+	if (evt->notif.size < sizeof(*bpsc)) {
+		dev_err(dev, "BP SLOT CHANGE event: Not enough data\n");
+		return -EINVAL;
+	}
+	bpsc = container_of(evt->notif.rceb, struct uwb_rc_evt_bp_slot_change, rceb);
+
+	mutex_lock(&rc->uwb_dev.mutex);
+	if (uwb_rc_evt_bp_slot_change_no_slot(bpsc)) {
+		dev_info(dev, "stopped beaconing: No free slots in BP\n");
+		rc->beaconing = -1;
+	} else
+		rc->uwb_dev.beacon_slot = uwb_rc_evt_bp_slot_change_slot_num(bpsc);
+	mutex_unlock(&rc->uwb_dev.mutex);
+
+	return 0;
+}
+
+/**
+ * Handle UWB_RC_EVT_BPOIE_CHANGE events
+ *
+ * XXXXX
+ */
+struct uwb_ie_bpo {
+	struct uwb_ie_hdr hdr;
+	u8                bp_length;
+	u8                data[];
+} __attribute__((packed));
+
+int uwbd_evt_handle_rc_bpoie_change(struct uwb_event *evt)
+{
+	int result = -EINVAL;
+	struct device *dev = &evt->rc->uwb_dev.dev;
+	struct uwb_rc_evt_bpoie_change *bpoiec;
+	struct uwb_ie_bpo *bpoie;
+	static unsigned count;	/* FIXME: this is a temp hack */
+	size_t iesize;
+
+	/* Is there enough data to decode it? */
+	if (evt->notif.size < sizeof(*bpoiec)) {
+		dev_err(dev, "BPOIEC notification: Not enough data to "
+			"decode (%zu vs %zu bytes needed)\n",
+			evt->notif.size, sizeof(*bpoiec));
+		goto error;
+	}
+	bpoiec = container_of(evt->notif.rceb, struct uwb_rc_evt_bpoie_change, rceb);
+	iesize = le16_to_cpu(bpoiec->wBPOIELength);
+	if (iesize < sizeof(*bpoie)) {
+		dev_err(dev, "BPOIEC notification: Not enough IE data to "
+			"decode (%zu vs %zu bytes needed)\n",
+			iesize, sizeof(*bpoie));
+		goto error;
+	}
+	if (++count % 1000 == 0)	/* Lame placeholder */
+		dev_info(dev, "BPOIE: %u changes received\n", count);
+	/*
+	 * FIXME: At this point we should go over all the IEs in the
+	 *        bpoiec->BPOIE array and act on each.
+	 */
+	result = 0;
+error:
+	return result;
+}
+
+/**
+ * uwb_bg_joined - is the RC in a beacon group?
+ * @rc: the radio controller
+ *
+ * Returns true if the radio controller is in a beacon group (even if
+ * it's the sole member).
+ */
+int uwb_bg_joined(struct uwb_rc *rc)
+{
+	return rc->beaconing != -1;
+}
+EXPORT_SYMBOL_GPL(uwb_bg_joined);
+
+/*
+ * Print beaconing state.
+ */
+static ssize_t uwb_rc_beacon_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_rc *rc = uwb_dev->rc;
+	ssize_t result;
+
+	mutex_lock(&rc->uwb_dev.mutex);
+	result = sprintf(buf, "%d\n", rc->beaconing);
+	mutex_unlock(&rc->uwb_dev.mutex);
+	return result;
+}
+
+/*
+ * Start beaconing on the specified channel, or stop beaconing.
+ *
+ * The BPST offset of when to start searching for a beacon group to
+ * join may be specified.
+ */
+static ssize_t uwb_rc_beacon_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t size)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_rc *rc = uwb_dev->rc;
+	int channel;
+	unsigned bpst_offset = 0;
+	ssize_t result = -EINVAL;
+
+	result = sscanf(buf, "%d %u\n", &channel, &bpst_offset);
+	if (result >= 1)
+		result = uwb_rc_beacon(rc, channel, bpst_offset);
+
+	return result < 0 ? result : size;
+}
+DEVICE_ATTR(beacon, S_IRUGO | S_IWUSR, uwb_rc_beacon_show, uwb_rc_beacon_store);
diff --git a/drivers/uwb/driver.c b/drivers/uwb/driver.c
new file mode 100644
index 0000000..521cdeb
--- /dev/null
+++ b/drivers/uwb/driver.c
@@ -0,0 +1,144 @@
+/*
+ * Ultra Wide Band
+ * Driver initialization, etc
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * Life cycle: FIXME: explain
+ *
+ *  UWB radio controller:
+ *
+ *    1. alloc a uwb_rc, zero it
+ *    2. call uwb_rc_init() on it to set it up + ops (won't do any
+ *       kind of allocation)
+ *    3. register (now it is owned by the UWB stack--deregister before
+ *       freeing/destroying).
+ *    4. It lives on it's own now (UWB stack handles)--when it
+ *       disconnects, call unregister()
+ *    5. free it.
+ *
+ *    Make sure you have a reference to the uwb_rc before calling
+ *    any of the UWB API functions.
+ *
+ * TODO:
+ *
+ * 1. Locking and life cycle management is crappy still. All entry
+ *    points to the UWB HCD API assume you have a reference on the
+ *    uwb_rc structure and that it won't go away. They mutex lock it
+ *    before doing anything.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kdev_t.h>
+#include <linux/random.h>
+#include <linux/uwb/debug.h>
+#include "uwb-internal.h"
+
+
+/* UWB stack attributes (or 'global' constants) */
+
+
+/**
+ * If a beacon dissapears for longer than this, then we consider the
+ * device who was represented by that beacon to be gone.
+ *
+ * ECMA-368[17.2.3, last para] establishes that a device must not
+ * consider a device to be its neighbour if he doesn't receive a beacon
+ * for more than mMaxLostBeacons. mMaxLostBeacons is defined in
+ * ECMA-368[17.16] as 3; because we can get only one beacon per
+ * superframe, that'd be 3 * 65ms = 195 ~ 200 ms. Let's give it time
+ * for jitter and stuff and make it 500 ms.
+ */
+unsigned long beacon_timeout_ms = 500;
+
+static
+ssize_t beacon_timeout_ms_show(struct class *class, char *buf)
+{
+	return scnprintf(buf, PAGE_SIZE, "%lu\n", beacon_timeout_ms);
+}
+
+static
+ssize_t beacon_timeout_ms_store(struct class *class,
+				const char *buf, size_t size)
+{
+	unsigned long bt;
+	ssize_t result;
+	result = sscanf(buf, "%lu", &bt);
+	if (result != 1)
+		return -EINVAL;
+	beacon_timeout_ms = bt;
+	return size;
+}
+
+static struct class_attribute uwb_class_attrs[] = {
+	__ATTR(beacon_timeout_ms, S_IWUSR | S_IRUGO,
+	       beacon_timeout_ms_show, beacon_timeout_ms_store),
+	__ATTR_NULL,
+};
+
+/** Device model classes */
+struct class uwb_rc_class = {
+	.name        = "uwb_rc",
+	.class_attrs = uwb_class_attrs,
+};
+
+
+static int __init uwb_subsys_init(void)
+{
+	int result = 0;
+
+	result = uwb_est_create();
+	if (result < 0) {
+		printk(KERN_ERR "uwb: Can't initialize EST subsystem\n");
+		goto error_est_init;
+	}
+
+	result = class_register(&uwb_rc_class);
+	if (result < 0)
+		goto error_uwb_rc_class_register;
+	uwbd_start();
+	uwb_dbg_init();
+	return 0;
+
+error_uwb_rc_class_register:
+	uwb_est_destroy();
+error_est_init:
+	return result;
+}
+module_init(uwb_subsys_init);
+
+static void __exit uwb_subsys_exit(void)
+{
+	uwb_dbg_exit();
+	uwbd_stop();
+	class_unregister(&uwb_rc_class);
+	uwb_est_destroy();
+	return;
+}
+module_exit(uwb_subsys_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Ultra Wide Band core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/drp-avail.c b/drivers/uwb/drp-avail.c
new file mode 100644
index 0000000..3febd855
--- /dev/null
+++ b/drivers/uwb/drp-avail.c
@@ -0,0 +1,288 @@
+/*
+ * Ultra Wide Band
+ * DRP availability management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Reinette Chatre <reinette.chatre@intel.com>
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ *
+ * Manage DRP Availability (the MAS available for DRP
+ * reservations). Thus:
+ *
+ * - Handle DRP Availability Change notifications
+ *
+ * - Allow the reservation manager to indicate MAS reserved/released
+ *   by local (owned by/targeted at the radio controller)
+ *   reservations.
+ *
+ * - Based on the two sources above, generate a DRP Availability IE to
+ *   be included in the beacon.
+ *
+ * See also the documentation for struct uwb_drp_avail.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/bitmap.h>
+#include "uwb-internal.h"
+
+/**
+ * uwb_drp_avail_init - initialize an RC's MAS availability
+ *
+ * All MAS are available initially.  The RC will inform use which
+ * slots are used for the BP (it may change in size).
+ */
+void uwb_drp_avail_init(struct uwb_rc *rc)
+{
+	bitmap_fill(rc->drp_avail.global, UWB_NUM_MAS);
+	bitmap_fill(rc->drp_avail.local, UWB_NUM_MAS);
+	bitmap_fill(rc->drp_avail.pending, UWB_NUM_MAS);
+}
+
+/*
+ * Determine MAS available for new local reservations.
+ *
+ * avail = global & local & pending
+ */
+static void uwb_drp_available(struct uwb_rc *rc, struct uwb_mas_bm *avail)
+{
+	bitmap_and(avail->bm, rc->drp_avail.global, rc->drp_avail.local, UWB_NUM_MAS);
+	bitmap_and(avail->bm, avail->bm, rc->drp_avail.pending, UWB_NUM_MAS);
+}
+
+/**
+ * uwb_drp_avail_reserve_pending - reserve MAS for a new reservation
+ * @rc: the radio controller
+ * @mas: the MAS to reserve
+ *
+ * Returns 0 on success, or -EBUSY if the MAS requested aren't available.
+ */
+int uwb_drp_avail_reserve_pending(struct uwb_rc *rc, struct uwb_mas_bm *mas)
+{
+	struct uwb_mas_bm avail;
+
+	uwb_drp_available(rc, &avail);
+	if (!bitmap_subset(mas->bm, avail.bm, UWB_NUM_MAS))
+		return -EBUSY;
+
+	bitmap_andnot(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS);
+	return 0;
+}
+
+/**
+ * uwb_drp_avail_reserve - reserve MAS for an established reservation
+ * @rc: the radio controller
+ * @mas: the MAS to reserve
+ */
+void uwb_drp_avail_reserve(struct uwb_rc *rc, struct uwb_mas_bm *mas)
+{
+	bitmap_or(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS);
+	bitmap_andnot(rc->drp_avail.local, rc->drp_avail.local, mas->bm, UWB_NUM_MAS);
+	rc->drp_avail.ie_valid = false;
+}
+
+/**
+ * uwb_drp_avail_release - release MAS from a pending or established reservation
+ * @rc: the radio controller
+ * @mas: the MAS to release
+ */
+void uwb_drp_avail_release(struct uwb_rc *rc, struct uwb_mas_bm *mas)
+{
+	bitmap_or(rc->drp_avail.local, rc->drp_avail.local, mas->bm, UWB_NUM_MAS);
+	bitmap_or(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS);
+	rc->drp_avail.ie_valid = false;
+}
+
+/**
+ * uwb_drp_avail_ie_update - update the DRP Availability IE
+ * @rc: the radio controller
+ *
+ * avail = global & local
+ */
+void uwb_drp_avail_ie_update(struct uwb_rc *rc)
+{
+	struct uwb_mas_bm avail;
+
+	bitmap_and(avail.bm, rc->drp_avail.global, rc->drp_avail.local, UWB_NUM_MAS);
+
+	rc->drp_avail.ie.hdr.element_id = UWB_IE_DRP_AVAILABILITY;
+	rc->drp_avail.ie.hdr.length = UWB_NUM_MAS / 8;
+	uwb_mas_bm_copy_le(rc->drp_avail.ie.bmp, &avail);
+	rc->drp_avail.ie_valid = true;
+}
+
+/**
+ * Create an unsigned long from a buffer containing a byte stream.
+ *
+ * @array: pointer to buffer
+ * @itr:   index of buffer from where we start
+ * @len:   the buffer's remaining size may not be exact multiple of
+ *         sizeof(unsigned long), @len is the length of buffer that needs
+ *         to be converted. This will be sizeof(unsigned long) or smaller
+ *         (BUG if not). If it is smaller then we will pad the remaining
+ *         space of the result with zeroes.
+ */
+static
+unsigned long get_val(u8 *array, size_t itr, size_t len)
+{
+	unsigned long val = 0;
+	size_t top = itr + len;
+
+	BUG_ON(len > sizeof(val));
+
+	while (itr < top) {
+		val <<= 8;
+		val |= array[top - 1];
+		top--;
+	}
+	val <<= 8 * (sizeof(val) - len); /* padding */
+	return val;
+}
+
+/**
+ * Initialize bitmap from data buffer.
+ *
+ * The bitmap to be converted could come from a IE, for example a
+ * DRP Availability IE.
+ * From ECMA-368 1.0 [16.8.7]: "
+ * octets: 1            1               N * (0 to 32)
+ *         Element ID   Length (=N)     DRP Availability Bitmap
+ *
+ * The DRP Availability Bitmap field is up to 256 bits long, one
+ * bit for each MAS in the superframe, where the least-significant
+ * bit of the field corresponds to the first MAS in the superframe
+ * and successive bits correspond to successive MASs."
+ *
+ * The DRP Availability bitmap is in octets from 0 to 32, so octet
+ * 32 contains bits for MAS 1-8, etc. If the bitmap is smaller than 32
+ * octets, the bits in octets not included at the end of the bitmap are
+ * treated as zero. In this case (when the bitmap is smaller than 32
+ * octets) the MAS represented range from MAS 1 to MAS (size of bitmap)
+ * with the last octet still containing bits for MAS 1-8, etc.
+ *
+ * For example:
+ * F00F0102 03040506 0708090A 0B0C0D0E 0F010203
+ * ^^^^
+ * ||||
+ * ||||
+ * |||\LSB of byte is MAS 9
+ * ||\MSB of byte is MAS 16
+ * |\LSB of first byte is MAS 1
+ * \ MSB of byte is MAS 8
+ *
+ * An example of this encoding can be found in ECMA-368 Annex-D [Table D.11]
+ *
+ * The resulting bitmap will have the following mapping:
+ *	bit position 0 == MAS 1
+ *	bit position 1 == MAS 2
+ *	...
+ *	bit position (UWB_NUM_MAS - 1) == MAS UWB_NUM_MAS
+ *
+ * @bmp_itr:	pointer to bitmap (can be declared with DECLARE_BITMAP)
+ * @buffer:	pointer to buffer containing bitmap data in big endian
+ *              format (MSB first)
+ * @buffer_size:number of bytes with which bitmap should be initialized
+ */
+static
+void buffer_to_bmp(unsigned long *bmp_itr, void *_buffer,
+		   size_t buffer_size)
+{
+	u8 *buffer = _buffer;
+	size_t itr, len;
+	unsigned long val;
+
+	itr = 0;
+	while (itr < buffer_size) {
+		len = buffer_size - itr >= sizeof(val) ?
+			sizeof(val) : buffer_size - itr;
+		val = get_val(buffer, itr, len);
+		bmp_itr[itr / sizeof(val)] = val;
+		itr += sizeof(val);
+	}
+}
+
+
+/**
+ * Extract DRP Availability bitmap from the notification.
+ *
+ * The notification that comes in contains a bitmap of (UWB_NUM_MAS / 8) bytes
+ * We convert that to our internal representation.
+ */
+static
+int uwbd_evt_get_drp_avail(struct uwb_event *evt, unsigned long *bmp)
+{
+	struct device *dev = &evt->rc->uwb_dev.dev;
+	struct uwb_rc_evt_drp_avail *drp_evt;
+	int result = -EINVAL;
+
+	/* Is there enough data to decode the event? */
+	if (evt->notif.size < sizeof(*drp_evt)) {
+		dev_err(dev, "DRP Availability Change: Not enough "
+			"data to decode event [%zu bytes, %zu "
+			"needed]\n", evt->notif.size, sizeof(*drp_evt));
+		goto error;
+	}
+	drp_evt = container_of(evt->notif.rceb, struct uwb_rc_evt_drp_avail, rceb);
+	buffer_to_bmp(bmp, drp_evt->bmp, UWB_NUM_MAS/8);
+	result = 0;
+error:
+	return result;
+}
+
+
+/**
+ * Process an incoming DRP Availability notification.
+ *
+ * @evt:	Event information (packs the actual event data, which
+ *              radio controller it came to, etc).
+ *
+ * @returns:    0 on success (so uwbd() frees the event buffer), < 0
+ *              on error.
+ *
+ * According to ECMA-368 1.0 [16.8.7], bits set to ONE indicate that
+ * the MAS slot is available, bits set to ZERO indicate that the slot
+ * is busy.
+ *
+ * So we clear available slots, we set used slots :)
+ *
+ * The notification only marks non-availability based on the BP and
+ * received DRP IEs that are not for this radio controller.  A copy of
+ * this bitmap is needed to generate the real availability (which
+ * includes local and pending reservations).
+ *
+ * The DRP Availability IE that this radio controller emits will need
+ * to be updated.
+ */
+int uwbd_evt_handle_rc_drp_avail(struct uwb_event *evt)
+{
+	int result;
+	struct uwb_rc *rc = evt->rc;
+	DECLARE_BITMAP(bmp, UWB_NUM_MAS);
+
+	result = uwbd_evt_get_drp_avail(evt, bmp);
+	if (result < 0)
+		return result;
+
+	mutex_lock(&rc->rsvs_mutex);
+	bitmap_copy(rc->drp_avail.global, bmp, UWB_NUM_MAS);
+	rc->drp_avail.ie_valid = false;
+	mutex_unlock(&rc->rsvs_mutex);
+
+	uwb_rsv_sched_update(rc);
+
+	return 0;
+}
diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c
new file mode 100644
index 0000000..882724c
--- /dev/null
+++ b/drivers/uwb/drp-ie.c
@@ -0,0 +1,232 @@
+/*
+ * UWB DRP IE management.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/random.h>
+#include <linux/uwb.h>
+
+#include "uwb-internal.h"
+
+/*
+ * Allocate a DRP IE.
+ *
+ * To save having to free/allocate a DRP IE when its MAS changes,
+ * enough memory is allocated for the maxiumum number of DRP
+ * allocation fields.  This gives an overhead per reservation of up to
+ * (UWB_NUM_ZONES - 1) * 4 = 60 octets.
+ */
+static struct uwb_ie_drp *uwb_drp_ie_alloc(void)
+{
+	struct uwb_ie_drp *drp_ie;
+	unsigned tiebreaker;
+
+	drp_ie = kzalloc(sizeof(struct uwb_ie_drp) +
+			UWB_NUM_ZONES * sizeof(struct uwb_drp_alloc),
+			GFP_KERNEL);
+	if (drp_ie) {
+		drp_ie->hdr.element_id = UWB_IE_DRP;
+
+		get_random_bytes(&tiebreaker, sizeof(unsigned));
+		uwb_ie_drp_set_tiebreaker(drp_ie, tiebreaker & 1);
+	}
+	return drp_ie;
+}
+
+
+/*
+ * Fill a DRP IE's allocation fields from a MAS bitmap.
+ */
+static void uwb_drp_ie_from_bm(struct uwb_ie_drp *drp_ie,
+			       struct uwb_mas_bm *mas)
+{
+	int z, i, num_fields = 0, next = 0;
+	struct uwb_drp_alloc *zones;
+	__le16 current_bmp;
+	DECLARE_BITMAP(tmp_bmp, UWB_NUM_MAS);
+	DECLARE_BITMAP(tmp_mas_bm, UWB_MAS_PER_ZONE);
+
+	zones = drp_ie->allocs;
+
+	bitmap_copy(tmp_bmp, mas->bm, UWB_NUM_MAS);
+
+	/* Determine unique MAS bitmaps in zones from bitmap. */
+	for (z = 0; z < UWB_NUM_ZONES; z++) {
+		bitmap_copy(tmp_mas_bm, tmp_bmp, UWB_MAS_PER_ZONE);
+		if (bitmap_weight(tmp_mas_bm, UWB_MAS_PER_ZONE) > 0) {
+			bool found = false;
+			current_bmp = (__le16) *tmp_mas_bm;
+			for (i = 0; i < next; i++) {
+				if (current_bmp == zones[i].mas_bm) {
+					zones[i].zone_bm |= 1 << z;
+					found = true;
+					break;
+				}
+			}
+			if (!found)  {
+				num_fields++;
+				zones[next].zone_bm = 1 << z;
+				zones[next].mas_bm = current_bmp;
+				next++;
+			}
+		}
+		bitmap_shift_right(tmp_bmp, tmp_bmp, UWB_MAS_PER_ZONE, UWB_NUM_MAS);
+	}
+
+	/* Store in format ready for transmission (le16). */
+	for (i = 0; i < num_fields; i++) {
+		drp_ie->allocs[i].zone_bm = cpu_to_le16(zones[i].zone_bm);
+		drp_ie->allocs[i].mas_bm = cpu_to_le16(zones[i].mas_bm);
+	}
+
+	drp_ie->hdr.length = sizeof(struct uwb_ie_drp) - sizeof(struct uwb_ie_hdr)
+		+ num_fields * sizeof(struct uwb_drp_alloc);
+}
+
+/**
+ * uwb_drp_ie_update - update a reservation's DRP IE
+ * @rsv: the reservation
+ */
+int uwb_drp_ie_update(struct uwb_rsv *rsv)
+{
+	struct device *dev = &rsv->rc->uwb_dev.dev;
+	struct uwb_ie_drp *drp_ie;
+	int reason_code, status;
+
+	switch (rsv->state) {
+	case UWB_RSV_STATE_NONE:
+		kfree(rsv->drp_ie);
+		rsv->drp_ie = NULL;
+		return 0;
+	case UWB_RSV_STATE_O_INITIATED:
+		reason_code = UWB_DRP_REASON_ACCEPTED;
+		status = 0;
+		break;
+	case UWB_RSV_STATE_O_PENDING:
+		reason_code = UWB_DRP_REASON_ACCEPTED;
+		status = 0;
+		break;
+	case UWB_RSV_STATE_O_MODIFIED:
+		reason_code = UWB_DRP_REASON_MODIFIED;
+		status = 1;
+		break;
+	case UWB_RSV_STATE_O_ESTABLISHED:
+		reason_code = UWB_DRP_REASON_ACCEPTED;
+		status = 1;
+		break;
+	case UWB_RSV_STATE_T_ACCEPTED:
+		reason_code = UWB_DRP_REASON_ACCEPTED;
+		status = 1;
+		break;
+	case UWB_RSV_STATE_T_DENIED:
+		reason_code = UWB_DRP_REASON_DENIED;
+		status = 0;
+		break;
+	default:
+		dev_dbg(dev, "rsv with unhandled state (%d)\n", rsv->state);
+		return -EINVAL;
+	}
+
+	if (rsv->drp_ie == NULL) {
+		rsv->drp_ie = uwb_drp_ie_alloc();
+		if (rsv->drp_ie == NULL)
+			return -ENOMEM;
+	}
+	drp_ie = rsv->drp_ie;
+
+	uwb_ie_drp_set_owner(drp_ie,        uwb_rsv_is_owner(rsv));
+	uwb_ie_drp_set_status(drp_ie,       status);
+	uwb_ie_drp_set_reason_code(drp_ie,  reason_code);
+	uwb_ie_drp_set_stream_index(drp_ie, rsv->stream);
+	uwb_ie_drp_set_type(drp_ie,         rsv->type);
+
+	if (uwb_rsv_is_owner(rsv)) {
+		switch (rsv->target.type) {
+		case UWB_RSV_TARGET_DEV:
+			drp_ie->dev_addr = rsv->target.dev->dev_addr;
+			break;
+		case UWB_RSV_TARGET_DEVADDR:
+			drp_ie->dev_addr = rsv->target.devaddr;
+			break;
+		}
+	} else
+		drp_ie->dev_addr = rsv->owner->dev_addr;
+
+	uwb_drp_ie_from_bm(drp_ie, &rsv->mas);
+
+	rsv->ie_valid = true;
+	return 0;
+}
+
+/*
+ * Set MAS bits from given MAS bitmap in a single zone of large bitmap.
+ *
+ * We are given a zone id and the MAS bitmap of bits that need to be set in
+ * this zone. Note that this zone may already have bits set and this only
+ * adds settings - we cannot simply assign the MAS bitmap contents to the
+ * zone contents. We iterate over the the bits (MAS) in the zone and set the
+ * bits that are set in the given MAS bitmap.
+ */
+static
+void uwb_drp_ie_single_zone_to_bm(struct uwb_mas_bm *bm, u8 zone, u16 mas_bm)
+{
+	int mas;
+	u16 mas_mask;
+
+	for (mas = 0; mas < UWB_MAS_PER_ZONE; mas++) {
+		mas_mask = 1 << mas;
+		if (mas_bm & mas_mask)
+			set_bit(zone * UWB_NUM_ZONES + mas, bm->bm);
+	}
+}
+
+/**
+ * uwb_drp_ie_zones_to_bm - convert DRP allocation fields to a bitmap
+ * @mas:    MAS bitmap that will be populated to correspond to the
+ *          allocation fields in the DRP IE
+ * @drp_ie: the DRP IE that contains the allocation fields.
+ *
+ * The input format is an array of MAS allocation fields (16 bit Zone
+ * bitmap, 16 bit MAS bitmap) as described in [ECMA-368] section
+ * 16.8.6. The output is a full 256 bit MAS bitmap.
+ *
+ * We go over all the allocation fields, for each allocation field we
+ * know which zones are impacted. We iterate over all the zones
+ * impacted and call a function that will set the correct MAS bits in
+ * each zone.
+ */
+void uwb_drp_ie_to_bm(struct uwb_mas_bm *bm, const struct uwb_ie_drp *drp_ie)
+{
+	int numallocs = (drp_ie->hdr.length - 4) / 4;
+	const struct uwb_drp_alloc *alloc;
+	int cnt;
+	u16 zone_bm, mas_bm;
+	u8 zone;
+	u16 zone_mask;
+
+	for (cnt = 0; cnt < numallocs; cnt++) {
+		alloc = &drp_ie->allocs[cnt];
+		zone_bm = le16_to_cpu(alloc->zone_bm);
+		mas_bm = le16_to_cpu(alloc->mas_bm);
+		for (zone = 0; zone < UWB_NUM_ZONES; zone++)   {
+			zone_mask = 1 << zone;
+			if (zone_bm & zone_mask)
+				uwb_drp_ie_single_zone_to_bm(bm, zone, mas_bm);
+		}
+	}
+}
diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c
new file mode 100644
index 0000000..c0b1e5e
--- /dev/null
+++ b/drivers/uwb/drp.c
@@ -0,0 +1,461 @@
+/*
+ * Ultra Wide Band
+ * Dynamic Reservation Protocol handling
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/delay.h>
+#include "uwb-internal.h"
+
+/**
+ * Construct and send the SET DRP IE
+ *
+ * @rc:         UWB Host controller
+ * @returns:    >= 0 number of bytes still available in the beacon
+ *              < 0 errno code on error.
+ *
+ * See WUSB[8.6.2.7]: The host must set all the DRP IEs that it wants the
+ * device to include in its beacon at the same time. We thus have to
+ * traverse all reservations and include the DRP IEs of all PENDING
+ * and NEGOTIATED reservations in a SET DRP command for transmission.
+ *
+ * A DRP Availability IE is appended.
+ *
+ * rc->uwb_dev.mutex is held
+ *
+ * FIXME We currently ignore the returned value indicating the remaining space
+ * in beacon. This could be used to deny reservation requests earlier if
+ * determined that they would cause the beacon space to be exceeded.
+ */
+static
+int uwb_rc_gen_send_drp_ie(struct uwb_rc *rc)
+{
+	int result;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_rc_cmd_set_drp_ie *cmd;
+	struct uwb_rc_evt_set_drp_ie reply;
+	struct uwb_rsv *rsv;
+	int num_bytes = 0;
+	u8 *IEDataptr;
+
+	result = -ENOMEM;
+	/* First traverse all reservations to determine memory needed. */
+	list_for_each_entry(rsv, &rc->reservations, rc_node) {
+		if (rsv->drp_ie != NULL)
+			num_bytes += rsv->drp_ie->hdr.length + 2;
+	}
+	num_bytes += sizeof(rc->drp_avail.ie);
+	cmd = kzalloc(sizeof(*cmd) + num_bytes, GFP_KERNEL);
+	if (cmd == NULL)
+		goto error;
+	cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
+	cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SET_DRP_IE);
+	cmd->wIELength = num_bytes;
+	IEDataptr = (u8 *)&cmd->IEData[0];
+
+	/* Next traverse all reservations to place IEs in allocated memory. */
+	list_for_each_entry(rsv, &rc->reservations, rc_node) {
+		if (rsv->drp_ie != NULL) {
+			memcpy(IEDataptr, rsv->drp_ie,
+			       rsv->drp_ie->hdr.length + 2);
+			IEDataptr += rsv->drp_ie->hdr.length + 2;
+		}
+	}
+	memcpy(IEDataptr, &rc->drp_avail.ie, sizeof(rc->drp_avail.ie));
+
+	reply.rceb.bEventType = UWB_RC_CET_GENERAL;
+	reply.rceb.wEvent = UWB_RC_CMD_SET_DRP_IE;
+	result = uwb_rc_cmd(rc, "SET-DRP-IE", &cmd->rccb,
+			sizeof(*cmd) + num_bytes, &reply.rceb,
+			sizeof(reply));
+	if (result < 0)
+		goto error_cmd;
+	result = le16_to_cpu(reply.wRemainingSpace);
+	if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: command execution "
+				"failed: %s (%d). RemainingSpace in beacon "
+				"= %d\n", uwb_rc_strerror(reply.bResultCode),
+				reply.bResultCode, result);
+		result = -EIO;
+	} else {
+		dev_dbg(dev, "SET-DRP-IE sent. RemainingSpace in beacon "
+			     "= %d.\n", result);
+		result = 0;
+	}
+error_cmd:
+	kfree(cmd);
+error:
+	return result;
+
+}
+/**
+ * Send all DRP IEs associated with this host
+ *
+ * @returns:    >= 0 number of bytes still available in the beacon
+ *              < 0 errno code on error.
+ *
+ * As per the protocol we obtain the host controller device lock to access
+ * bandwidth structures.
+ */
+int uwb_rc_send_all_drp_ie(struct uwb_rc *rc)
+{
+	int result;
+
+	mutex_lock(&rc->uwb_dev.mutex);
+	result = uwb_rc_gen_send_drp_ie(rc);
+	mutex_unlock(&rc->uwb_dev.mutex);
+	return result;
+}
+
+void uwb_drp_handle_timeout(struct uwb_rsv *rsv)
+{
+	struct device *dev = &rsv->rc->uwb_dev.dev;
+
+	dev_dbg(dev, "reservation timeout in state %s (%d)\n",
+		uwb_rsv_state_str(rsv->state), rsv->state);
+
+	switch (rsv->state) {
+	case UWB_RSV_STATE_O_INITIATED:
+		if (rsv->is_multicast) {
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
+			return;
+		}
+		break;
+	case UWB_RSV_STATE_O_ESTABLISHED:
+		if (rsv->is_multicast)
+			return;
+		break;
+	default:
+		break;
+	}
+	uwb_rsv_remove(rsv);
+}
+
+/*
+ * Based on the DRP IE, transition a target reservation to a new
+ * state.
+ */
+static void uwb_drp_process_target(struct uwb_rc *rc, struct uwb_rsv *rsv,
+				   struct uwb_ie_drp *drp_ie)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	int status;
+	enum uwb_drp_reason reason_code;
+
+	status = uwb_ie_drp_status(drp_ie);
+	reason_code = uwb_ie_drp_reason_code(drp_ie);
+
+	if (status) {
+		switch (reason_code) {
+		case UWB_DRP_REASON_ACCEPTED:
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_ACCEPTED);
+			break;
+		case UWB_DRP_REASON_MODIFIED:
+			dev_err(dev, "FIXME: unhandled reason code (%d/%d)\n",
+				reason_code, status);
+			break;
+		default:
+			dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n",
+				 reason_code, status);
+		}
+	} else {
+		switch (reason_code) {
+		case UWB_DRP_REASON_ACCEPTED:
+			/* New reservations are handled in uwb_rsv_find(). */
+			break;
+		case UWB_DRP_REASON_DENIED:
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+			break;
+		case UWB_DRP_REASON_CONFLICT:
+		case UWB_DRP_REASON_MODIFIED:
+			dev_err(dev, "FIXME: unhandled reason code (%d/%d)\n",
+				reason_code, status);
+			break;
+		default:
+			dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n",
+				 reason_code, status);
+		}
+	}
+}
+
+/*
+ * Based on the DRP IE, transition an owner reservation to a new
+ * state.
+ */
+static void uwb_drp_process_owner(struct uwb_rc *rc, struct uwb_rsv *rsv,
+				  struct uwb_ie_drp *drp_ie)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	int status;
+	enum uwb_drp_reason reason_code;
+
+	status = uwb_ie_drp_status(drp_ie);
+	reason_code = uwb_ie_drp_reason_code(drp_ie);
+
+	if (status) {
+		switch (reason_code) {
+		case UWB_DRP_REASON_ACCEPTED:
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
+			break;
+		case UWB_DRP_REASON_MODIFIED:
+			dev_err(dev, "FIXME: unhandled reason code (%d/%d)\n",
+				reason_code, status);
+			break;
+		default:
+			dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n",
+				 reason_code, status);
+		}
+	} else {
+		switch (reason_code) {
+		case UWB_DRP_REASON_PENDING:
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_PENDING);
+			break;
+		case UWB_DRP_REASON_DENIED:
+			uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+			break;
+		case UWB_DRP_REASON_CONFLICT:
+		case UWB_DRP_REASON_MODIFIED:
+			dev_err(dev, "FIXME: unhandled reason code (%d/%d)\n",
+				reason_code, status);
+			break;
+		default:
+			dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n",
+				 reason_code, status);
+		}
+	}
+}
+
+/*
+ * Process a received DRP IE, it's either for a reservation owned by
+ * the RC or targeted at it (or it's for a WUSB cluster reservation).
+ */
+static void uwb_drp_process(struct uwb_rc *rc, struct uwb_dev *src,
+		     struct uwb_ie_drp *drp_ie)
+{
+	struct uwb_rsv *rsv;
+
+	rsv = uwb_rsv_find(rc, src, drp_ie);
+	if (!rsv) {
+		/*
+		 * No reservation? It's either for a recently
+		 * terminated reservation; or the DRP IE couldn't be
+		 * processed (e.g., an invalid IE or out of memory).
+		 */
+		return;
+	}
+
+	/*
+	 * Do nothing with DRP IEs for reservations that have been
+	 * terminated.
+	 */
+	if (rsv->state == UWB_RSV_STATE_NONE) {
+		uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+		return;
+	}
+
+	if (uwb_ie_drp_owner(drp_ie))
+		uwb_drp_process_target(rc, rsv, drp_ie);
+	else
+		uwb_drp_process_owner(rc, rsv, drp_ie);
+}
+
+
+/*
+ * Process all the DRP IEs (both DRP IEs and the DRP Availability IE)
+ * from a device.
+ */
+static
+void uwb_drp_process_all(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt,
+			 size_t ielen, struct uwb_dev *src_dev)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_ie_hdr *ie_hdr;
+	void *ptr;
+
+	ptr = drp_evt->ie_data;
+	for (;;) {
+		ie_hdr = uwb_ie_next(&ptr, &ielen);
+		if (!ie_hdr)
+			break;
+
+		switch (ie_hdr->element_id) {
+		case UWB_IE_DRP_AVAILABILITY:
+			/* FIXME: does something need to be done with this? */
+			break;
+		case UWB_IE_DRP:
+			uwb_drp_process(rc, src_dev, (struct uwb_ie_drp *)ie_hdr);
+			break;
+		default:
+			dev_warn(dev, "unexpected IE in DRP notification\n");
+			break;
+		}
+	}
+
+	if (ielen > 0)
+		dev_warn(dev, "%d octets remaining in DRP notification\n",
+			 (int)ielen);
+}
+
+
+/*
+ * Go through all the DRP IEs and find the ones that conflict with our
+ * reservations.
+ *
+ * FIXME: must resolve the conflict according the the rules in
+ * [ECMA-368].
+ */
+static
+void uwb_drp_process_conflict_all(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt,
+				  size_t ielen, struct uwb_dev *src_dev)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_ie_hdr *ie_hdr;
+	struct uwb_ie_drp *drp_ie;
+	void *ptr;
+
+	ptr = drp_evt->ie_data;
+	for (;;) {
+		ie_hdr = uwb_ie_next(&ptr, &ielen);
+		if (!ie_hdr)
+			break;
+
+		drp_ie = container_of(ie_hdr, struct uwb_ie_drp, hdr);
+
+		/* FIXME: check if this DRP IE conflicts. */
+	}
+
+	if (ielen > 0)
+		dev_warn(dev, "%d octets remaining in DRP notification\n",
+			 (int)ielen);
+}
+
+
+/*
+ * Terminate all reservations owned by, or targeted at, 'uwb_dev'.
+ */
+static void uwb_drp_terminate_all(struct uwb_rc *rc, struct uwb_dev *uwb_dev)
+{
+	struct uwb_rsv *rsv;
+
+	list_for_each_entry(rsv, &rc->reservations, rc_node) {
+		if (rsv->owner == uwb_dev
+		    || (rsv->target.type == UWB_RSV_TARGET_DEV && rsv->target.dev == uwb_dev))
+			uwb_rsv_remove(rsv);
+	}
+}
+
+
+/**
+ * uwbd_evt_handle_rc_drp - handle a DRP_IE event
+ * @evt: the DRP_IE event from the radio controller
+ *
+ * This processes DRP notifications from the radio controller, either
+ * initiating a new reservation or transitioning an existing
+ * reservation into a different state.
+ *
+ * DRP notifications can occur for three different reasons:
+ *
+ * - UWB_DRP_NOTIF_DRP_IE_RECVD: one or more DRP IEs with the RC as
+ *   the target or source have been recieved.
+ *
+ *   These DRP IEs could be new or for an existing reservation.
+ *
+ *   If the DRP IE for an existing reservation ceases to be to
+ *   recieved for at least mMaxLostBeacons, the reservation should be
+ *   considered to be terminated.  Note that the TERMINATE reason (see
+ *   below) may not always be signalled (e.g., the remote device has
+ *   two or more reservations established with the RC).
+ *
+ * - UWB_DRP_NOTIF_CONFLICT: DRP IEs from any device in the beacon
+ *   group conflict with the RC's reservations.
+ *
+ * - UWB_DRP_NOTIF_TERMINATE: DRP IEs are no longer being received
+ *   from a device (i.e., it's terminated all reservations).
+ *
+ * Only the software state of the reservations is changed; the setting
+ * of the radio controller's DRP IEs is done after all the events in
+ * an event buffer are processed.  This saves waiting multiple times
+ * for the SET_DRP_IE command to complete.
+ */
+int uwbd_evt_handle_rc_drp(struct uwb_event *evt)
+{
+	struct device *dev = &evt->rc->uwb_dev.dev;
+	struct uwb_rc *rc = evt->rc;
+	struct uwb_rc_evt_drp *drp_evt;
+	size_t ielength, bytes_left;
+	struct uwb_dev_addr src_addr;
+	struct uwb_dev *src_dev;
+	int reason;
+
+	/* Is there enough data to decode the event (and any IEs in
+	   its payload)? */
+	if (evt->notif.size < sizeof(*drp_evt)) {
+		dev_err(dev, "DRP event: Not enough data to decode event "
+			"[%zu bytes left, %zu needed]\n",
+			evt->notif.size, sizeof(*drp_evt));
+		return 0;
+	}
+	bytes_left = evt->notif.size - sizeof(*drp_evt);
+	drp_evt = container_of(evt->notif.rceb, struct uwb_rc_evt_drp, rceb);
+	ielength = le16_to_cpu(drp_evt->ie_length);
+	if (bytes_left != ielength) {
+		dev_err(dev, "DRP event: Not enough data in payload [%zu"
+			"bytes left, %zu declared in the event]\n",
+			bytes_left, ielength);
+		return 0;
+	}
+
+	memcpy(src_addr.data, &drp_evt->src_addr, sizeof(src_addr));
+	src_dev = uwb_dev_get_by_devaddr(rc, &src_addr);
+	if (!src_dev) {
+		/*
+		 * A DRP notification from an unrecognized device.
+		 *
+		 * This is probably from a WUSB device that doesn't
+		 * have an EUI-48 and therefore doesn't show up in the
+		 * UWB device database.  It's safe to simply ignore
+		 * these.
+		 */
+		return 0;
+	}
+
+	mutex_lock(&rc->rsvs_mutex);
+
+	reason = uwb_rc_evt_drp_reason(drp_evt);
+
+	switch (reason) {
+	case UWB_DRP_NOTIF_DRP_IE_RCVD:
+		uwb_drp_process_all(rc, drp_evt, ielength, src_dev);
+		break;
+	case UWB_DRP_NOTIF_CONFLICT:
+		uwb_drp_process_conflict_all(rc, drp_evt, ielength, src_dev);
+		break;
+	case UWB_DRP_NOTIF_TERMINATE:
+		uwb_drp_terminate_all(rc, src_dev);
+		break;
+	default:
+		dev_warn(dev, "ignored DRP event with reason code: %d\n", reason);
+		break;
+	}
+
+	mutex_unlock(&rc->rsvs_mutex);
+
+	uwb_dev_put(src_dev);
+	return 0;
+}
diff --git a/drivers/uwb/est.c b/drivers/uwb/est.c
new file mode 100644
index 0000000..5fe566b
--- /dev/null
+++ b/drivers/uwb/est.c
@@ -0,0 +1,477 @@
+/*
+ * Ultra Wide Band Radio Control
+ * Event Size Tables management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * Infrastructure, code and data tables for guessing the size of
+ * events received on the notification endpoints of UWB radio
+ * controllers.
+ *
+ * You define a table of events and for each, its size and how to get
+ * the extra size.
+ *
+ * ENTRY POINTS:
+ *
+ * uwb_est_{init/destroy}(): To initialize/release the EST subsystem.
+ *
+ * uwb_est_[u]register(): To un/register event size tables
+ *   uwb_est_grow()
+ *
+ * uwb_est_find_size(): Get the size of an event
+ *   uwb_est_get_size()
+ */
+#include <linux/spinlock.h>
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+#include "uwb-internal.h"
+
+
+struct uwb_est {
+	u16 type_event_high;
+	u16 vendor, product;
+	u8 entries;
+	const struct uwb_est_entry *entry;
+};
+
+
+static struct uwb_est *uwb_est;
+static u8 uwb_est_size;
+static u8 uwb_est_used;
+static DEFINE_RWLOCK(uwb_est_lock);
+
+/**
+ * WUSB Standard Event Size Table, HWA-RC interface
+ *
+ * Sizes for events and notifications type 0 (general), high nibble 0.
+ */
+static
+struct uwb_est_entry uwb_est_00_00xx[] = {
+	[UWB_RC_EVT_IE_RCV] = {
+		.size = sizeof(struct uwb_rc_evt_ie_rcv),
+		.offset = 1 + offsetof(struct uwb_rc_evt_ie_rcv, wIELength),
+	},
+	[UWB_RC_EVT_BEACON] = {
+		.size = sizeof(struct uwb_rc_evt_beacon),
+		.offset = 1 + offsetof(struct uwb_rc_evt_beacon, wBeaconInfoLength),
+	},
+	[UWB_RC_EVT_BEACON_SIZE] = {
+		.size = sizeof(struct uwb_rc_evt_beacon_size),
+	},
+	[UWB_RC_EVT_BPOIE_CHANGE] = {
+		.size = sizeof(struct uwb_rc_evt_bpoie_change),
+		.offset = 1 + offsetof(struct uwb_rc_evt_bpoie_change,
+				       wBPOIELength),
+	},
+	[UWB_RC_EVT_BP_SLOT_CHANGE] = {
+		.size = sizeof(struct uwb_rc_evt_bp_slot_change),
+	},
+	[UWB_RC_EVT_BP_SWITCH_IE_RCV] = {
+		.size = sizeof(struct uwb_rc_evt_bp_switch_ie_rcv),
+		.offset = 1 + offsetof(struct uwb_rc_evt_bp_switch_ie_rcv, wIELength),
+	},
+	[UWB_RC_EVT_DEV_ADDR_CONFLICT] = {
+		.size = sizeof(struct uwb_rc_evt_dev_addr_conflict),
+	},
+	[UWB_RC_EVT_DRP_AVAIL] = {
+		.size = sizeof(struct uwb_rc_evt_drp_avail)
+	},
+	[UWB_RC_EVT_DRP] = {
+		.size = sizeof(struct uwb_rc_evt_drp),
+		.offset = 1 + offsetof(struct uwb_rc_evt_drp, ie_length),
+	},
+	[UWB_RC_EVT_BP_SWITCH_STATUS] = {
+		.size = sizeof(struct uwb_rc_evt_bp_switch_status),
+	},
+	[UWB_RC_EVT_CMD_FRAME_RCV] = {
+		.size = sizeof(struct uwb_rc_evt_cmd_frame_rcv),
+		.offset = 1 + offsetof(struct uwb_rc_evt_cmd_frame_rcv, dataLength),
+	},
+	[UWB_RC_EVT_CHANNEL_CHANGE_IE_RCV] = {
+		.size = sizeof(struct uwb_rc_evt_channel_change_ie_rcv),
+		.offset = 1 + offsetof(struct uwb_rc_evt_channel_change_ie_rcv, wIELength),
+	},
+	[UWB_RC_CMD_CHANNEL_CHANGE] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_DEV_ADDR_MGMT] = {
+		.size = sizeof(struct uwb_rc_evt_dev_addr_mgmt) },
+	[UWB_RC_CMD_GET_IE] = {
+		.size = sizeof(struct uwb_rc_evt_get_ie),
+		.offset = 1 + offsetof(struct uwb_rc_evt_get_ie, wIELength),
+	},
+	[UWB_RC_CMD_RESET] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_SCAN] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_SET_BEACON_FILTER] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_SET_DRP_IE] = {
+		.size = sizeof(struct uwb_rc_evt_set_drp_ie),
+	},
+	[UWB_RC_CMD_SET_IE] = {
+		.size = sizeof(struct uwb_rc_evt_set_ie),
+	},
+	[UWB_RC_CMD_SET_NOTIFICATION_FILTER] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_SET_TX_POWER] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_SLEEP] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_START_BEACON] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_STOP_BEACON] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_BP_MERGE] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_SEND_COMMAND_FRAME] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+	[UWB_RC_CMD_SET_ASIE_NOTIF] = {
+		.size = sizeof(struct uwb_rc_evt_confirm),
+	},
+};
+
+static
+struct uwb_est_entry uwb_est_01_00xx[] = {
+	[UWB_RC_DAA_ENERGY_DETECTED] = {
+		.size = sizeof(struct uwb_rc_evt_daa_energy_detected),
+	},
+	[UWB_RC_SET_DAA_ENERGY_MASK] = {
+		.size = sizeof(struct uwb_rc_evt_set_daa_energy_mask),
+	},
+	[UWB_RC_SET_NOTIFICATION_FILTER_EX] = {
+		.size = sizeof(struct uwb_rc_evt_set_notification_filter_ex),
+	},
+};
+
+/**
+ * Initialize the EST subsystem
+ *
+ * Register the standard tables also.
+ *
+ * FIXME: tag init
+ */
+int uwb_est_create(void)
+{
+	int result;
+
+	uwb_est_size = 2;
+	uwb_est_used = 0;
+	uwb_est = kzalloc(uwb_est_size * sizeof(uwb_est[0]), GFP_KERNEL);
+	if (uwb_est == NULL)
+		return -ENOMEM;
+
+	result = uwb_est_register(UWB_RC_CET_GENERAL, 0, 0xffff, 0xffff,
+				  uwb_est_00_00xx, ARRAY_SIZE(uwb_est_00_00xx));
+	if (result < 0)
+		goto out;
+	result = uwb_est_register(UWB_RC_CET_EX_TYPE_1, 0, 0xffff, 0xffff,
+				  uwb_est_01_00xx, ARRAY_SIZE(uwb_est_01_00xx));
+out:
+	return result;
+}
+
+
+/** Clean it up */
+void uwb_est_destroy(void)
+{
+	kfree(uwb_est);
+	uwb_est = NULL;
+	uwb_est_size = uwb_est_used = 0;
+}
+
+
+/**
+ * Double the capacity of the EST table
+ *
+ * @returns 0 if ok, < 0 errno no error.
+ */
+static
+int uwb_est_grow(void)
+{
+	size_t actual_size = uwb_est_size * sizeof(uwb_est[0]);
+	void *new = kmalloc(2 * actual_size, GFP_ATOMIC);
+	if (new == NULL)
+		return -ENOMEM;
+	memcpy(new, uwb_est, actual_size);
+	memset(new + actual_size, 0, actual_size);
+	kfree(uwb_est);
+	uwb_est = new;
+	uwb_est_size *= 2;
+	return 0;
+}
+
+
+/**
+ * Register an event size table
+ *
+ * Makes room for it if the table is full, and then inserts  it in the
+ * right position (entries are sorted by type, event_high, vendor and
+ * then product).
+ *
+ * @vendor:  vendor code for matching against the device (0x0000 and
+ *           0xffff mean any); use 0x0000 to force all to match without
+ *           checking possible vendor specific ones, 0xfffff to match
+ *           after checking vendor specific ones.
+ *
+ * @product: product code from that vendor; same matching rules, use
+ *           0x0000 for not allowing vendor specific matches, 0xffff
+ *           for allowing.
+ *
+ * This arragement just makes the tables sort differenty. Because the
+ * table is sorted by growing type-event_high-vendor-product, a zero
+ * vendor will match before than a 0x456a vendor, that will match
+ * before a 0xfffff vendor.
+ *
+ * @returns 0 if ok, < 0 errno on error (-ENOENT if not found).
+ */
+/* FIXME: add bus type to vendor/product code */
+int uwb_est_register(u8 type, u8 event_high, u16 vendor, u16 product,
+		     const struct uwb_est_entry *entry, size_t entries)
+{
+	unsigned long flags;
+	unsigned itr;
+	u16 type_event_high;
+	int result = 0;
+
+	write_lock_irqsave(&uwb_est_lock, flags);
+	if (uwb_est_used == uwb_est_size) {
+		result = uwb_est_grow();
+		if (result < 0)
+			goto out;
+	}
+	/* Find the right spot to insert it in */
+	type_event_high = type << 8 | event_high;
+	for (itr = 0; itr < uwb_est_used; itr++)
+		if (uwb_est[itr].type_event_high < type
+		    && uwb_est[itr].vendor < vendor
+		    && uwb_est[itr].product < product)
+			break;
+
+	/* Shift others to make room for the new one? */
+	if (itr < uwb_est_used)
+		memmove(&uwb_est[itr+1], &uwb_est[itr], uwb_est_used - itr);
+	uwb_est[itr].type_event_high = type << 8 | event_high;
+	uwb_est[itr].vendor = vendor;
+	uwb_est[itr].product = product;
+	uwb_est[itr].entry = entry;
+	uwb_est[itr].entries = entries;
+	uwb_est_used++;
+out:
+	write_unlock_irqrestore(&uwb_est_lock, flags);
+	return result;
+}
+EXPORT_SYMBOL_GPL(uwb_est_register);
+
+
+/**
+ * Unregister an event size table
+ *
+ * This just removes the specified entry and moves the ones after it
+ * to fill in the gap. This is needed to keep the list sorted; no
+ * reallocation is done to reduce the size of the table.
+ *
+ * We unregister by all the data we used to register instead of by
+ * pointer to the @entry array because we might have used the same
+ * table for a bunch of IDs (for example).
+ *
+ * @returns 0 if ok, < 0 errno on error (-ENOENT if not found).
+ */
+int uwb_est_unregister(u8 type, u8 event_high, u16 vendor, u16 product,
+		       const struct uwb_est_entry *entry, size_t entries)
+{
+	unsigned long flags;
+	unsigned itr;
+	struct uwb_est est_cmp = {
+		.type_event_high = type << 8 | event_high,
+		.vendor = vendor,
+		.product = product,
+		.entry = entry,
+		.entries = entries
+	};
+	write_lock_irqsave(&uwb_est_lock, flags);
+	for (itr = 0; itr < uwb_est_used; itr++)
+		if (!memcmp(&uwb_est[itr], &est_cmp, sizeof(est_cmp)))
+			goto found;
+	write_unlock_irqrestore(&uwb_est_lock, flags);
+	return -ENOENT;
+
+found:
+	if (itr < uwb_est_used - 1)	/* Not last one? move ones above */
+		memmove(&uwb_est[itr], &uwb_est[itr+1], uwb_est_used - itr - 1);
+	uwb_est_used--;
+	write_unlock_irqrestore(&uwb_est_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uwb_est_unregister);
+
+
+/**
+ * Get the size of an event from a table
+ *
+ * @rceb: pointer to the buffer with the event
+ * @rceb_size: size of the area pointed to by @rceb in bytes.
+ * @returns: > 0      Size of the event
+ *	     -ENOSPC  An area big enough was not provided to look
+ *		      ahead into the event's guts and guess the size.
+ *	     -EINVAL  Unknown event code (wEvent).
+ *
+ * This will look at the received RCEB and guess what is the total
+ * size. For variable sized events, it will look further ahead into
+ * their length field to see how much data should be read.
+ *
+ * Note this size is *not* final--the neh (Notification/Event Handle)
+ * might specificy an extra size to add.
+ */
+static
+ssize_t uwb_est_get_size(struct uwb_rc *uwb_rc, struct uwb_est *est,
+			 u8 event_low, const struct uwb_rceb *rceb,
+			 size_t rceb_size)
+{
+	unsigned offset;
+	ssize_t size;
+	struct device *dev = &uwb_rc->uwb_dev.dev;
+	const struct uwb_est_entry *entry;
+
+	size = -ENOENT;
+	if (event_low >= est->entries) {	/* in range? */
+		dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: event %u out of range\n",
+			est, est->type_event_high, est->vendor, est->product,
+			est->entries, event_low);
+		goto out;
+	}
+	size = -ENOENT;
+	entry = &est->entry[event_low];
+	if (entry->size == 0 && entry->offset == 0) {	/* unknown? */
+		dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: event %u unknown\n",
+			est, est->type_event_high, est->vendor,	est->product,
+			est->entries, event_low);
+		goto out;
+	}
+	offset = entry->offset;	/* extra fries with that? */
+	if (offset == 0)
+		size = entry->size;
+	else {
+		/* Ops, got an extra size field at 'offset'--read it */
+		const void *ptr = rceb;
+		size_t type_size = 0;
+		offset--;
+		size = -ENOSPC;			/* enough data for more? */
+		switch (entry->type) {
+		case UWB_EST_16:  type_size = sizeof(__le16); break;
+		case UWB_EST_8:   type_size = sizeof(u8);     break;
+		default: 	 BUG();
+		}
+		if (offset + type_size > rceb_size) {
+			dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: "
+				"not enough data to read extra size\n",
+				est, est->type_event_high, est->vendor,
+				est->product, est->entries);
+			goto out;
+		}
+		size = entry->size;
+		ptr += offset;
+		switch (entry->type) {
+		case UWB_EST_16:  size += le16_to_cpu(*(__le16 *)ptr); break;
+		case UWB_EST_8:   size += *(u8 *)ptr;                  break;
+		default: 	 BUG();
+		}
+	}
+out:
+	return size;
+}
+
+
+/**
+ * Guesses the size of a WA event
+ *
+ * @rceb: pointer to the buffer with the event
+ * @rceb_size: size of the area pointed to by @rceb in bytes.
+ * @returns: > 0      Size of the event
+ *	     -ENOSPC  An area big enough was not provided to look
+ *		      ahead into the event's guts and guess the size.
+ *	     -EINVAL  Unknown event code (wEvent).
+ *
+ * This will look at the received RCEB and guess what is the total
+ * size by checking all the tables registered with
+ * uwb_est_register(). For variable sized events, it will look further
+ * ahead into their length field to see how much data should be read.
+ *
+ * Note this size is *not* final--the neh (Notification/Event Handle)
+ * might specificy an extra size to add or replace.
+ */
+ssize_t uwb_est_find_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
+			  size_t rceb_size)
+{
+	/* FIXME: add vendor/product data */
+	ssize_t size;
+	struct device *dev = &rc->uwb_dev.dev;
+	unsigned long flags;
+	unsigned itr;
+	u16 type_event_high, event;
+	u8 *ptr = (u8 *) rceb;
+
+	read_lock_irqsave(&uwb_est_lock, flags);
+	d_printf(2, dev, "Size query for event 0x%02x/%04x/%02x,"
+		 " buffer size %ld\n",
+		 (unsigned) rceb->bEventType,
+		 (unsigned) le16_to_cpu(rceb->wEvent),
+		 (unsigned) rceb->bEventContext,
+		 (long) rceb_size);
+	size = -ENOSPC;
+	if (rceb_size < sizeof(*rceb))
+		goto out;
+	event = le16_to_cpu(rceb->wEvent);
+	type_event_high = rceb->bEventType << 8 | (event & 0xff00) >> 8;
+	for (itr = 0; itr < uwb_est_used; itr++) {
+		d_printf(3, dev, "Checking EST 0x%04x/%04x/%04x\n",
+			uwb_est[itr].type_event_high, uwb_est[itr].vendor,
+			uwb_est[itr].product);
+		if (uwb_est[itr].type_event_high != type_event_high)
+			continue;
+		size = uwb_est_get_size(rc, &uwb_est[itr],
+					event & 0x00ff, rceb, rceb_size);
+		/* try more tables that might handle the same type */
+		if (size != -ENOENT)
+			goto out;
+	}
+	dev_dbg(dev, "event 0x%02x/%04x/%02x: no handlers available; "
+		"RCEB %02x %02x %02x %02x\n",
+		(unsigned) rceb->bEventType,
+		(unsigned) le16_to_cpu(rceb->wEvent),
+		(unsigned) rceb->bEventContext,
+		ptr[0], ptr[1], ptr[2], ptr[3]);
+	size = -ENOENT;
+out:
+	read_unlock_irqrestore(&uwb_est_lock, flags);
+	return size;
+}
+EXPORT_SYMBOL_GPL(uwb_est_find_size);
diff --git a/drivers/uwb/hwa-rc.c b/drivers/uwb/hwa-rc.c
new file mode 100644
index 0000000..3d26fa0
--- /dev/null
+++ b/drivers/uwb/hwa-rc.c
@@ -0,0 +1,926 @@
+/*
+ * WUSB Host Wire Adapter: Radio Control Interface (WUSB[8.6])
+ * Radio Control command/event transport
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Initialize the Radio Control interface Driver.
+ *
+ * For each device probed, creates an 'struct hwarc' which contains
+ * just the representation of the UWB Radio Controller, and the logic
+ * for reading notifications and passing them to the UWB Core.
+ *
+ * So we initialize all of those, register the UWB Radio Controller
+ * and setup the notification/event handle to pipe the notifications
+ * to the UWB management Daemon.
+ *
+ * Command and event filtering.
+ *
+ * This is the driver for the Radio Control Interface described in WUSB
+ * 1.0. The core UWB module assumes that all drivers are compliant to the
+ * WHCI 0.95 specification. We thus create a filter that parses all
+ * incoming messages from the (WUSB 1.0) device and manipulate them to
+ * conform to the WHCI 0.95 specification. Similarly, outgoing messages
+ * are parsed and manipulated to conform to the WUSB 1.0 compliant messages
+ * that the device expects. Only a few messages are affected:
+ * Affected events:
+ *    UWB_RC_EVT_BEACON
+ *    UWB_RC_EVT_BP_SLOT_CHANGE
+ *    UWB_RC_EVT_DRP_AVAIL
+ *    UWB_RC_EVT_DRP
+ * Affected commands:
+ *    UWB_RC_CMD_SCAN
+ *    UWB_RC_CMD_SET_DRP_IE
+ *
+ *
+ *
+ */
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/wusb.h>
+#include <linux/usb/wusb-wa.h>
+#include <linux/uwb.h>
+#include "uwb-internal.h"
+#define D_LOCAL 1
+#include <linux/uwb/debug.h>
+
+/* The device uses commands and events from the WHCI specification, although
+ * reporting itself as WUSB compliant. */
+#define WUSB_QUIRK_WHCI_CMD_EVT		0x01
+
+/**
+ * Descriptor for an instance of the UWB Radio Control Driver that
+ * attaches to the RCI interface of the Host Wired Adapter.
+ *
+ * Unless there is a lock specific to the 'data members', all access
+ * is protected by uwb_rc->mutex.
+ *
+ * The NEEP (Notification/Event EndPoint) URB (@neep_urb) writes to
+ * @rd_buffer. Note there is no locking because it is perfectly (heh!)
+ * serialized--probe() submits an URB, callback is called, processes
+ * the data (synchronously), submits another URB, and so on. There is
+ * no concurrent access to the buffer.
+ */
+struct hwarc {
+	struct usb_device *usb_dev;
+	struct usb_interface *usb_iface;
+	struct uwb_rc *uwb_rc;		/* UWB host controller */
+	struct urb *neep_urb;		/* Notification endpoint handling */
+	struct edc neep_edc;
+	void *rd_buffer;		/* NEEP read buffer */
+};
+
+
+/* Beacon received notification (WUSB 1.0 [8.6.3.2]) */
+struct uwb_rc_evt_beacon_WUSB_0100 {
+	struct uwb_rceb rceb;
+	u8	bChannelNumber;
+	__le16	wBPSTOffset;
+	u8	bLQI;
+	u8	bRSSI;
+	__le16	wBeaconInfoLength;
+	u8	BeaconInfo[];
+} __attribute__((packed));
+
+/**
+ * Filter WUSB 1.0 BEACON RCV notification to be WHCI 0.95
+ *
+ * @header: the incoming event
+ * @buf_size: size of buffer containing incoming event
+ * @new_size: size of event after filtering completed
+ *
+ * The WHCI 0.95 spec has a "Beacon Type" field. This value is unknown at
+ * the time we receive the beacon from WUSB so we just set it to
+ * UWB_RC_BEACON_TYPE_NEIGHBOR as a default.
+ * The solution below allocates memory upon receipt of every beacon from a
+ * WUSB device. This will deteriorate performance. What is the right way to
+ * do this?
+ */
+static
+int hwarc_filter_evt_beacon_WUSB_0100(struct uwb_rc *rc,
+				      struct uwb_rceb **header,
+				      const size_t buf_size,
+				      size_t *new_size)
+{
+	struct uwb_rc_evt_beacon_WUSB_0100 *be;
+	struct uwb_rc_evt_beacon *newbe;
+	size_t bytes_left, ielength;
+	struct device *dev = &rc->uwb_dev.dev;
+
+	be = container_of(*header, struct uwb_rc_evt_beacon_WUSB_0100, rceb);
+	bytes_left = buf_size;
+	if (bytes_left < sizeof(*be)) {
+		dev_err(dev, "Beacon Received Notification: Not enough data "
+			"to decode for filtering (%zu vs %zu bytes needed)\n",
+			bytes_left, sizeof(*be));
+		return -EINVAL;
+	}
+	bytes_left -= sizeof(*be);
+	ielength = le16_to_cpu(be->wBeaconInfoLength);
+	if (bytes_left < ielength) {
+		dev_err(dev, "Beacon Received Notification: Not enough data "
+			"to decode IEs (%zu vs %zu bytes needed)\n",
+			bytes_left, ielength);
+		return -EINVAL;
+	}
+	newbe = kzalloc(sizeof(*newbe) + ielength, GFP_ATOMIC);
+	if (newbe == NULL)
+		return -ENOMEM;
+	newbe->rceb = be->rceb;
+	newbe->bChannelNumber = be->bChannelNumber;
+	newbe->bBeaconType = UWB_RC_BEACON_TYPE_NEIGHBOR;
+	newbe->wBPSTOffset = be->wBPSTOffset;
+	newbe->bLQI = be->bLQI;
+	newbe->bRSSI = be->bRSSI;
+	newbe->wBeaconInfoLength = be->wBeaconInfoLength;
+	memcpy(newbe->BeaconInfo, be->BeaconInfo, ielength);
+	*header = &newbe->rceb;
+	*new_size = sizeof(*newbe) + ielength;
+	return 1;  /* calling function will free memory */
+}
+
+
+/* DRP Availability change notification (WUSB 1.0 [8.6.3.8]) */
+struct uwb_rc_evt_drp_avail_WUSB_0100 {
+	struct uwb_rceb rceb;
+	__le16 wIELength;
+	u8 IEData[];
+} __attribute__((packed));
+
+/**
+ * Filter WUSB 1.0 DRP AVAILABILITY CHANGE notification to be WHCI 0.95
+ *
+ * @header: the incoming event
+ * @buf_size: size of buffer containing incoming event
+ * @new_size: size of event after filtering completed
+ */
+static
+int hwarc_filter_evt_drp_avail_WUSB_0100(struct uwb_rc *rc,
+					 struct uwb_rceb **header,
+					 const size_t buf_size,
+					 size_t *new_size)
+{
+	struct uwb_rc_evt_drp_avail_WUSB_0100 *da;
+	struct uwb_rc_evt_drp_avail *newda;
+	struct uwb_ie_hdr *ie_hdr;
+	size_t bytes_left, ielength;
+	struct device *dev = &rc->uwb_dev.dev;
+
+
+	da = container_of(*header, struct uwb_rc_evt_drp_avail_WUSB_0100, rceb);
+	bytes_left = buf_size;
+	if (bytes_left < sizeof(*da)) {
+		dev_err(dev, "Not enough data to decode DRP Avail "
+			"Notification for filtering. Expected %zu, "
+			"received %zu.\n", (size_t)sizeof(*da), bytes_left);
+		return -EINVAL;
+	}
+	bytes_left -= sizeof(*da);
+	ielength = le16_to_cpu(da->wIELength);
+	if (bytes_left < ielength) {
+		dev_err(dev, "DRP Avail Notification filter: IE length "
+			"[%zu bytes] does not match actual length "
+			"[%zu bytes].\n", ielength, bytes_left);
+		return -EINVAL;
+	}
+	if (ielength < sizeof(*ie_hdr)) {
+		dev_err(dev, "DRP Avail Notification filter: Not enough "
+			"data to decode IE [%zu bytes, %zu needed]\n",
+			ielength, sizeof(*ie_hdr));
+		return -EINVAL;
+	}
+	ie_hdr = (void *) da->IEData;
+	if (ie_hdr->length > 32) {
+		dev_err(dev, "DRP Availability Change event has unexpected "
+			"length for filtering. Expected < 32 bytes, "
+			"got %zu bytes.\n", (size_t)ie_hdr->length);
+		return -EINVAL;
+	}
+	newda = kzalloc(sizeof(*newda), GFP_ATOMIC);
+	if (newda == NULL)
+		return -ENOMEM;
+	newda->rceb = da->rceb;
+	memcpy(newda->bmp, (u8 *) ie_hdr + sizeof(*ie_hdr), ie_hdr->length);
+	*header = &newda->rceb;
+	*new_size = sizeof(*newda);
+	return 1; /* calling function will free memory */
+}
+
+
+/* DRP notification (WUSB 1.0 [8.6.3.9]) */
+struct uwb_rc_evt_drp_WUSB_0100 {
+	struct uwb_rceb rceb;
+	struct uwb_dev_addr wSrcAddr;
+	u8 bExplicit;
+	__le16 wIELength;
+	u8 IEData[];
+} __attribute__((packed));
+
+/**
+ * Filter WUSB 1.0 DRP Notification to be WHCI 0.95
+ *
+ * @header: the incoming event
+ * @buf_size: size of buffer containing incoming event
+ * @new_size: size of event after filtering completed
+ *
+ * It is hard to manage DRP reservations without having a Reason code.
+ * Unfortunately there is none in the WUSB spec. We just set the default to
+ * DRP IE RECEIVED.
+ * We do not currently use the bBeaconSlotNumber value, so we set this to
+ * zero for now.
+ */
+static
+int hwarc_filter_evt_drp_WUSB_0100(struct uwb_rc *rc,
+				   struct uwb_rceb **header,
+				   const size_t buf_size,
+				   size_t *new_size)
+{
+	struct uwb_rc_evt_drp_WUSB_0100 *drpev;
+	struct uwb_rc_evt_drp *newdrpev;
+	size_t bytes_left, ielength;
+	struct device *dev = &rc->uwb_dev.dev;
+
+	drpev = container_of(*header, struct uwb_rc_evt_drp_WUSB_0100, rceb);
+	bytes_left = buf_size;
+	if (bytes_left < sizeof(*drpev)) {
+		dev_err(dev, "Not enough data to decode DRP Notification "
+			"for filtering. Expected %zu, received %zu.\n",
+			(size_t)sizeof(*drpev), bytes_left);
+		return -EINVAL;
+	}
+	ielength = le16_to_cpu(drpev->wIELength);
+	bytes_left -= sizeof(*drpev);
+	if (bytes_left < ielength) {
+		dev_err(dev, "DRP Notification filter: header length [%zu "
+			"bytes] does not match actual length [%zu "
+			"bytes].\n", ielength, bytes_left);
+		return -EINVAL;
+	}
+	newdrpev = kzalloc(sizeof(*newdrpev) + ielength, GFP_ATOMIC);
+	if (newdrpev == NULL)
+		return -ENOMEM;
+	newdrpev->rceb = drpev->rceb;
+	newdrpev->src_addr = drpev->wSrcAddr;
+	newdrpev->reason = UWB_DRP_NOTIF_DRP_IE_RCVD;
+	newdrpev->beacon_slot_number = 0;
+	newdrpev->ie_length = drpev->wIELength;
+	memcpy(newdrpev->ie_data, drpev->IEData, ielength);
+	*header = &newdrpev->rceb;
+	*new_size = sizeof(*newdrpev) + ielength;
+	return 1; /* calling function will free memory */
+}
+
+
+/* Scan Command (WUSB 1.0 [8.6.2.5]) */
+struct uwb_rc_cmd_scan_WUSB_0100 {
+	struct uwb_rccb rccb;
+	u8 bChannelNumber;
+	u8 bScanState;
+} __attribute__((packed));
+
+/**
+ * Filter WHCI 0.95 SCAN command to be WUSB 1.0 SCAN command
+ *
+ * @header:   command sent to device (compliant to WHCI 0.95)
+ * @size:     size of command sent to device
+ *
+ * We only reduce the size by two bytes because the WUSB 1.0 scan command
+ * does not have the last field (wStarttime). Also, make sure we don't send
+ * the device an unexpected scan type.
+ */
+static
+int hwarc_filter_cmd_scan_WUSB_0100(struct uwb_rc *rc,
+				    struct uwb_rccb **header,
+				    size_t *size)
+{
+	struct uwb_rc_cmd_scan *sc;
+
+	sc = container_of(*header, struct uwb_rc_cmd_scan, rccb);
+
+	if (sc->bScanState == UWB_SCAN_ONLY_STARTTIME)
+		sc->bScanState = UWB_SCAN_ONLY;
+	/* Don't send the last two bytes. */
+	*size -= 2;
+	return 0;
+}
+
+
+/* SET DRP IE command (WUSB 1.0 [8.6.2.7]) */
+struct uwb_rc_cmd_set_drp_ie_WUSB_0100 {
+	struct uwb_rccb rccb;
+	u8 bExplicit;
+	__le16 wIELength;
+	struct uwb_ie_drp IEData[];
+} __attribute__((packed));
+
+/**
+ * Filter WHCI 0.95 SET DRP IE command to be WUSB 1.0 SET DRP IE command
+ *
+ * @header:   command sent to device (compliant to WHCI 0.95)
+ * @size:     size of command sent to device
+ *
+ * WUSB has an extra bExplicit field - we assume always explicit
+ * negotiation so this field is set. The command expected by the device is
+ * thus larger than the one prepared by the driver so we need to
+ * reallocate memory to accommodate this.
+ * We trust the driver to send us the correct data so no checking is done
+ * on incoming data - evn though it is variable length.
+ */
+static
+int hwarc_filter_cmd_set_drp_ie_WUSB_0100(struct uwb_rc *rc,
+					  struct uwb_rccb **header,
+					  size_t *size)
+{
+	struct uwb_rc_cmd_set_drp_ie *orgcmd;
+	struct uwb_rc_cmd_set_drp_ie_WUSB_0100 *cmd;
+	size_t ielength;
+
+	orgcmd = container_of(*header, struct uwb_rc_cmd_set_drp_ie, rccb);
+	ielength = le16_to_cpu(orgcmd->wIELength);
+	cmd = kzalloc(sizeof(*cmd) + ielength, GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+	cmd->rccb = orgcmd->rccb;
+	cmd->bExplicit = 0;
+	cmd->wIELength = orgcmd->wIELength;
+	memcpy(cmd->IEData, orgcmd->IEData, ielength);
+	*header = &cmd->rccb;
+	*size = sizeof(*cmd) + ielength;
+	return 1; /* calling function will free memory */
+}
+
+
+/**
+ * Filter data from WHCI driver to WUSB device
+ *
+ * @header: WHCI 0.95 compliant command from driver
+ * @size:   length of command
+ *
+ * The routine managing commands to the device (uwb_rc_cmd()) will call the
+ * filtering function pointer (if it exists) before it passes any data to
+ * the device. At this time the command has been formatted according to
+ * WHCI 0.95 and is ready to be sent to the device.
+ *
+ * The filter function will be provided with the current command and its
+ * length. The function will manipulate the command if necessary and
+ * potentially reallocate memory for a command that needed more memory that
+ * the given command. If new memory was created the function will return 1
+ * to indicate to the calling function that the memory need to be freed
+ * when not needed any more. The size will contain the new length of the
+ * command.
+ * If memory has not been allocated we rely on the original mechanisms to
+ * free the memory of the command - even when we reduce the value of size.
+ */
+static
+int hwarc_filter_cmd_WUSB_0100(struct uwb_rc *rc, struct uwb_rccb **header,
+			       size_t *size)
+{
+	int result;
+	struct uwb_rccb *rccb = *header;
+	int cmd = le16_to_cpu(rccb->wCommand);
+	switch (cmd) {
+	case UWB_RC_CMD_SCAN:
+		result = hwarc_filter_cmd_scan_WUSB_0100(rc, header, size);
+		break;
+	case UWB_RC_CMD_SET_DRP_IE:
+		result = hwarc_filter_cmd_set_drp_ie_WUSB_0100(rc, header, size);
+		break;
+	default:
+		result = -ENOANO;
+		break;
+	}
+	return result;
+}
+
+
+/**
+ * Filter data from WHCI driver to WUSB device
+ *
+ * @header: WHCI 0.95 compliant command from driver
+ * @size:   length of command
+ *
+ * Filter commands based on which protocol the device supports. The WUSB
+ * errata should be the same as WHCI 0.95 so we do not filter that here -
+ * only WUSB 1.0.
+ */
+static
+int hwarc_filter_cmd(struct uwb_rc *rc, struct uwb_rccb **header,
+		     size_t *size)
+{
+	int result = -ENOANO;
+	if (rc->version == 0x0100)
+		result = hwarc_filter_cmd_WUSB_0100(rc, header, size);
+	return result;
+}
+
+
+/**
+ * Compute return value as sum of incoming value and value at given offset
+ *
+ * @rceb:      event for which we compute the size, it contains a variable
+ *	       length field.
+ * @core_size: size of the "non variable" part of the event
+ * @offset:    place in event where the length of the variable part is stored
+ * @buf_size: total length of buffer in which event arrived - we need to make
+ *	       sure we read the offset in memory that is still part of the event
+ */
+static
+ssize_t hwarc_get_event_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
+			     size_t core_size, size_t offset,
+			     const size_t buf_size)
+{
+	ssize_t size = -ENOSPC;
+	const void *ptr = rceb;
+	size_t type_size = sizeof(__le16);
+	struct device *dev = &rc->uwb_dev.dev;
+
+	if (offset + type_size >= buf_size) {
+		dev_err(dev, "Not enough data to read extra size of event "
+			"0x%02x/%04x/%02x, only got %zu bytes.\n",
+			rceb->bEventType, le16_to_cpu(rceb->wEvent),
+			rceb->bEventContext, buf_size);
+		goto out;
+	}
+	ptr += offset;
+	size = core_size + le16_to_cpu(*(__le16 *)ptr);
+out:
+	return size;
+}
+
+
+/* Beacon slot change notification (WUSB 1.0 [8.6.3.5]) */
+struct uwb_rc_evt_bp_slot_change_WUSB_0100 {
+	struct uwb_rceb rceb;
+	u8 bSlotNumber;
+} __attribute__((packed));
+
+
+/**
+ * Filter data from WUSB device to WHCI driver
+ *
+ * @header:	 incoming event
+ * @buf_size:	 size of buffer in which event arrived
+ * @_event_size: actual size of event in the buffer
+ * @new_size:	 size of event after filtered
+ *
+ * We don't know how the buffer is constructed - there may be more than one
+ * event in it so buffer length does not determine event length. We first
+ * determine the expected size of the incoming event. This value is passed
+ * back only if the actual filtering succeeded (so we know the computed
+ * expected size is correct). This value will be zero if
+ * the event did not need any filtering.
+ *
+ * WHCI interprets the BP Slot Change event's data differently than
+ * WUSB. The event sizes are exactly the same. The data field
+ * indicates the new beacon slot in which a RC is transmitting its
+ * beacon. The maximum value of this is 96 (wMacBPLength ECMA-368
+ * 17.16 (Table 117)). We thus know that the WUSB value will not set
+ * the bit bNoSlot, so we don't really do anything (placeholder).
+ */
+static
+int hwarc_filter_event_WUSB_0100(struct uwb_rc *rc, struct uwb_rceb **header,
+				 const size_t buf_size, size_t *_real_size,
+				 size_t *_new_size)
+{
+	int result = -ENOANO;
+	struct uwb_rceb *rceb = *header;
+	int event = le16_to_cpu(rceb->wEvent);
+	size_t event_size;
+	size_t core_size, offset;
+
+	if (rceb->bEventType != UWB_RC_CET_GENERAL)
+		goto out;
+	switch (event) {
+	case UWB_RC_EVT_BEACON:
+		core_size = sizeof(struct uwb_rc_evt_beacon_WUSB_0100);
+		offset = offsetof(struct uwb_rc_evt_beacon_WUSB_0100,
+				  wBeaconInfoLength);
+		event_size = hwarc_get_event_size(rc, rceb, core_size,
+						  offset, buf_size);
+		if (event_size < 0)
+			goto out;
+		*_real_size = event_size;
+		result = hwarc_filter_evt_beacon_WUSB_0100(rc, header,
+							   buf_size, _new_size);
+		break;
+	case UWB_RC_EVT_BP_SLOT_CHANGE:
+		*_new_size = *_real_size =
+			sizeof(struct uwb_rc_evt_bp_slot_change_WUSB_0100);
+		result = 0;
+		break;
+
+	case UWB_RC_EVT_DRP_AVAIL:
+		core_size = sizeof(struct uwb_rc_evt_drp_avail_WUSB_0100);
+		offset = offsetof(struct uwb_rc_evt_drp_avail_WUSB_0100,
+				  wIELength);
+		event_size = hwarc_get_event_size(rc, rceb, core_size,
+						  offset, buf_size);
+		if (event_size < 0)
+			goto out;
+		*_real_size = event_size;
+		result = hwarc_filter_evt_drp_avail_WUSB_0100(
+			rc, header, buf_size, _new_size);
+		break;
+
+	case UWB_RC_EVT_DRP:
+		core_size = sizeof(struct uwb_rc_evt_drp_WUSB_0100);
+		offset = offsetof(struct uwb_rc_evt_drp_WUSB_0100, wIELength);
+		event_size = hwarc_get_event_size(rc, rceb, core_size,
+						  offset, buf_size);
+		if (event_size < 0)
+			goto out;
+		*_real_size = event_size;
+		result = hwarc_filter_evt_drp_WUSB_0100(rc, header,
+							buf_size, _new_size);
+		break;
+
+	default:
+		break;
+	}
+out:
+	return result;
+}
+
+/**
+ * Filter data from WUSB device to WHCI driver
+ *
+ * @header:	 incoming event
+ * @buf_size:	 size of buffer in which event arrived
+ * @_event_size: actual size of event in the buffer
+ * @_new_size:	 size of event after filtered
+ *
+ * Filter events based on which protocol the device supports. The WUSB
+ * errata should be the same as WHCI 0.95 so we do not filter that here -
+ * only WUSB 1.0.
+ *
+ * If we don't handle it, we return -ENOANO (why the weird error code?
+ * well, so if I get it, I can pinpoint in the code that raised
+ * it...after all, not too many places use the higher error codes).
+ */
+static
+int hwarc_filter_event(struct uwb_rc *rc, struct uwb_rceb **header,
+		       const size_t buf_size, size_t *_real_size,
+		       size_t *_new_size)
+{
+	int result = -ENOANO;
+	if (rc->version == 0x0100)
+		result =  hwarc_filter_event_WUSB_0100(
+			rc, header, buf_size, _real_size, _new_size);
+	return result;
+}
+
+
+/**
+ * Execute an UWB RC command on HWA
+ *
+ * @rc:	      Instance of a Radio Controller that is a HWA
+ * @cmd:      Buffer containing the RCCB and payload to execute
+ * @cmd_size: Size of the command buffer.
+ *
+ * NOTE: rc's mutex has to be locked
+ */
+static
+int hwarc_cmd(struct uwb_rc *uwb_rc, const struct uwb_rccb *cmd, size_t cmd_size)
+{
+	struct hwarc *hwarc = uwb_rc->priv;
+	return usb_control_msg(
+		hwarc->usb_dev, usb_sndctrlpipe(hwarc->usb_dev, 0),
+		WA_EXEC_RC_CMD, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		0, hwarc->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+		(void *) cmd, cmd_size, 100 /* FIXME: this is totally arbitrary */);
+}
+
+static
+int hwarc_reset(struct uwb_rc *uwb_rc)
+{
+	struct hwarc *hwarc = uwb_rc->priv;
+	return usb_reset_device(hwarc->usb_dev);
+}
+
+/**
+ * Callback for the notification and event endpoint
+ *
+ * Check's that everything is fine and then passes the read data to
+ * the notification/event handling mechanism (neh).
+ */
+static
+void hwarc_neep_cb(struct urb *urb)
+{
+	struct hwarc *hwarc = urb->context;
+	struct usb_interface *usb_iface = hwarc->usb_iface;
+	struct device *dev = &usb_iface->dev;
+	int result;
+
+	switch (result = urb->status) {
+	case 0:
+		d_printf(3, dev, "NEEP: receive stat %d, %zu bytes\n",
+			 urb->status, (size_t)urb->actual_length);
+		uwb_rc_neh_grok(hwarc->uwb_rc, urb->transfer_buffer,
+				urb->actual_length);
+		break;
+	case -ECONNRESET:	/* Not an error, but a controlled situation; */
+	case -ENOENT:		/* (we killed the URB)...so, no broadcast */
+		d_printf(2, dev, "NEEP: URB reset/noent %d\n", urb->status);
+		goto out;
+	case -ESHUTDOWN:	/* going away! */
+		d_printf(2, dev, "NEEP: URB down %d\n", urb->status);
+		goto out;
+	default:		/* On general errors, retry unless it gets ugly */
+		if (edc_inc(&hwarc->neep_edc, EDC_MAX_ERRORS,
+			    EDC_ERROR_TIMEFRAME))
+			goto error_exceeded;
+		dev_err(dev, "NEEP: URB error %d\n", urb->status);
+	}
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	d_printf(3, dev, "NEEP: submit %d\n", result);
+	if (result < 0) {
+		dev_err(dev, "NEEP: Can't resubmit URB (%d) resetting device\n",
+			result);
+		goto error;
+	}
+out:
+	return;
+
+error_exceeded:
+	dev_err(dev, "NEEP: URB max acceptable errors "
+		"exceeded, resetting device\n");
+error:
+	uwb_rc_neh_error(hwarc->uwb_rc, result);
+	uwb_rc_reset_all(hwarc->uwb_rc);
+	return;
+}
+
+static void hwarc_init(struct hwarc *hwarc)
+{
+	edc_init(&hwarc->neep_edc);
+}
+
+/**
+ * Initialize the notification/event endpoint stuff
+ *
+ * Note this is effectively a parallel thread; it knows that
+ * hwarc->uwb_rc always exists because the existence of a 'hwarc'
+ * means that there is a reverence on the hwarc->uwb_rc (see
+ * _probe()), and thus _neep_cb() can execute safely.
+ */
+static int hwarc_neep_init(struct uwb_rc *rc)
+{
+	struct hwarc *hwarc = rc->priv;
+	struct usb_interface *iface = hwarc->usb_iface;
+	struct usb_device *usb_dev = interface_to_usbdev(iface);
+	struct device *dev = &iface->dev;
+	int result;
+	struct usb_endpoint_descriptor *epd;
+
+	epd = &iface->cur_altsetting->endpoint[0].desc;
+	hwarc->rd_buffer = (void *) __get_free_page(GFP_KERNEL);
+	if (hwarc->rd_buffer == NULL) {
+		dev_err(dev, "Unable to allocate notification's read buffer\n");
+		goto error_rd_buffer;
+	}
+	hwarc->neep_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (hwarc->neep_urb == NULL) {
+		dev_err(dev, "Unable to allocate notification URB\n");
+		goto error_urb_alloc;
+	}
+	usb_fill_int_urb(hwarc->neep_urb, usb_dev,
+			 usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
+			 hwarc->rd_buffer, PAGE_SIZE,
+			 hwarc_neep_cb, hwarc, epd->bInterval);
+	result = usb_submit_urb(hwarc->neep_urb, GFP_ATOMIC);
+	if (result < 0) {
+		dev_err(dev, "Cannot submit notification URB: %d\n", result);
+		goto error_neep_submit;
+	}
+	return 0;
+
+error_neep_submit:
+	usb_free_urb(hwarc->neep_urb);
+error_urb_alloc:
+	free_page((unsigned long)hwarc->rd_buffer);
+error_rd_buffer:
+	return -ENOMEM;
+}
+
+
+/** Clean up all the notification endpoint resources */
+static void hwarc_neep_release(struct uwb_rc *rc)
+{
+	struct hwarc *hwarc = rc->priv;
+
+	usb_kill_urb(hwarc->neep_urb);
+	usb_free_urb(hwarc->neep_urb);
+	free_page((unsigned long)hwarc->rd_buffer);
+}
+
+/**
+ * Get the version from class-specific descriptor
+ *
+ * NOTE: this descriptor comes with the big bundled configuration
+ *	 descriptor that includes the interfaces' and endpoints', so
+ *	 we just look for it in the cached copy kept by the USB stack.
+ *
+ * NOTE2: We convert LE fields to CPU order.
+ */
+static int hwarc_get_version(struct uwb_rc *rc)
+{
+	int result;
+
+	struct hwarc *hwarc = rc->priv;
+	struct uwb_rc_control_intf_class_desc *descr;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct usb_device *usb_dev = hwarc->usb_dev;
+	char *itr;
+	struct usb_descriptor_header *hdr;
+	size_t itr_size, actconfig_idx;
+	u16 version;
+
+	actconfig_idx = (usb_dev->actconfig - usb_dev->config) /
+		sizeof(usb_dev->config[0]);
+	itr = usb_dev->rawdescriptors[actconfig_idx];
+	itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength);
+	while (itr_size >= sizeof(*hdr)) {
+		hdr = (struct usb_descriptor_header *) itr;
+		d_printf(3, dev, "Extra device descriptor: "
+			 "type %02x/%u bytes @ %zu (%zu left)\n",
+			 hdr->bDescriptorType, hdr->bLength,
+			 (itr - usb_dev->rawdescriptors[actconfig_idx]),
+			 itr_size);
+		if (hdr->bDescriptorType == USB_DT_CS_RADIO_CONTROL)
+			goto found;
+		itr += hdr->bLength;
+		itr_size -= hdr->bLength;
+	}
+	dev_err(dev, "cannot find Radio Control Interface Class descriptor\n");
+	return -ENODEV;
+
+found:
+	result = -EINVAL;
+	if (hdr->bLength > itr_size) {	/* is it available? */
+		dev_err(dev, "incomplete Radio Control Interface Class "
+			"descriptor (%zu bytes left, %u needed)\n",
+			itr_size, hdr->bLength);
+		goto error;
+	}
+	if (hdr->bLength < sizeof(*descr)) {
+		dev_err(dev, "short Radio Control Interface Class "
+			"descriptor\n");
+		goto error;
+	}
+	descr = (struct uwb_rc_control_intf_class_desc *) hdr;
+	/* Make LE fields CPU order */
+	version = __le16_to_cpu(descr->bcdRCIVersion);
+	if (version != 0x0100) {
+		dev_err(dev, "Device reports protocol version 0x%04x. We "
+			"do not support that. \n", version);
+		result = -EINVAL;
+		goto error;
+	}
+	rc->version = version;
+	d_printf(3, dev, "Device supports WUSB protocol version 0x%04x \n",
+		 rc->version);
+	result = 0;
+error:
+	return result;
+}
+
+/*
+ * By creating a 'uwb_rc', we have a reference on it -- that reference
+ * is the one we drop when we disconnect.
+ *
+ * No need to switch altsettings; according to WUSB1.0[8.6.1.1], there
+ * is only one altsetting allowed.
+ */
+static int hwarc_probe(struct usb_interface *iface,
+		       const struct usb_device_id *id)
+{
+	int result;
+	struct uwb_rc *uwb_rc;
+	struct hwarc *hwarc;
+	struct device *dev = &iface->dev;
+
+	result = -ENOMEM;
+	uwb_rc = uwb_rc_alloc();
+	if (uwb_rc == NULL) {
+		dev_err(dev, "unable to allocate RC instance\n");
+		goto error_rc_alloc;
+	}
+	hwarc = kzalloc(sizeof(*hwarc), GFP_KERNEL);
+	if (hwarc == NULL) {
+		dev_err(dev, "unable to allocate HWA RC instance\n");
+		goto error_alloc;
+	}
+	hwarc_init(hwarc);
+	hwarc->usb_dev = usb_get_dev(interface_to_usbdev(iface));
+	hwarc->usb_iface = usb_get_intf(iface);
+	hwarc->uwb_rc = uwb_rc;
+
+	uwb_rc->owner = THIS_MODULE;
+	uwb_rc->start = hwarc_neep_init;
+	uwb_rc->stop  = hwarc_neep_release;
+	uwb_rc->cmd   = hwarc_cmd;
+	uwb_rc->reset = hwarc_reset;
+	if (id->driver_info & WUSB_QUIRK_WHCI_CMD_EVT) {
+		uwb_rc->filter_cmd   = NULL;
+		uwb_rc->filter_event = NULL;
+	} else {
+		uwb_rc->filter_cmd   = hwarc_filter_cmd;
+		uwb_rc->filter_event = hwarc_filter_event;
+	}
+
+	result = uwb_rc_add(uwb_rc, dev, hwarc);
+	if (result < 0)
+		goto error_rc_add;
+	result = hwarc_get_version(uwb_rc);
+	if (result < 0) {
+		dev_err(dev, "cannot retrieve version of RC \n");
+		goto error_get_version;
+	}
+	usb_set_intfdata(iface, hwarc);
+	return 0;
+
+error_get_version:
+	uwb_rc_rm(uwb_rc);
+error_rc_add:
+	usb_put_intf(iface);
+	usb_put_dev(hwarc->usb_dev);
+error_alloc:
+	uwb_rc_put(uwb_rc);
+error_rc_alloc:
+	return result;
+}
+
+static void hwarc_disconnect(struct usb_interface *iface)
+{
+	struct hwarc *hwarc = usb_get_intfdata(iface);
+	struct uwb_rc *uwb_rc = hwarc->uwb_rc;
+
+	usb_set_intfdata(hwarc->usb_iface, NULL);
+	uwb_rc_rm(uwb_rc);
+	usb_put_intf(hwarc->usb_iface);
+	usb_put_dev(hwarc->usb_dev);
+	d_printf(1, &hwarc->usb_iface->dev, "freed hwarc %p\n", hwarc);
+	kfree(hwarc);
+	uwb_rc_put(uwb_rc);	/* when creating the device, refcount = 1 */
+}
+
+/** USB device ID's that we handle */
+static struct usb_device_id hwarc_id_table[] = {
+	/* D-Link DUB-1210 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3d02, 0xe0, 0x01, 0x02),
+	  .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
+	/* Intel i1480 (using firmware 1.3PA2-20070828) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x8086, 0x0c3b, 0xe0, 0x01, 0x02),
+	  .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
+	/* Generic match for the Radio Control interface */
+	{ USB_INTERFACE_INFO(0xe0, 0x01, 0x02), },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, hwarc_id_table);
+
+static struct usb_driver hwarc_driver = {
+	.name =		"hwa-rc",
+	.probe =	hwarc_probe,
+	.disconnect =	hwarc_disconnect,
+	.id_table =	hwarc_id_table,
+};
+
+static int __init hwarc_driver_init(void)
+{
+	int result;
+	result = usb_register(&hwarc_driver);
+	if (result < 0)
+		printk(KERN_ERR "HWA-RC: Cannot register USB driver: %d\n",
+		       result);
+	return result;
+
+}
+module_init(hwarc_driver_init);
+
+static void __exit hwarc_driver_exit(void)
+{
+	usb_deregister(&hwarc_driver);
+}
+module_exit(hwarc_driver_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Host Wireless Adapter Radio Control Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/i1480/Makefile b/drivers/uwb/i1480/Makefile
new file mode 100644
index 0000000..212bbc7
--- /dev/null
+++ b/drivers/uwb/i1480/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_UWB_I1480U)	+= dfu/ i1480-est.o
+obj-$(CONFIG_UWB_I1480U_WLP)	+= i1480u-wlp/
diff --git a/drivers/uwb/i1480/dfu/Makefile b/drivers/uwb/i1480/dfu/Makefile
new file mode 100644
index 0000000..bd1b9f2
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_UWB_I1480U)	+= i1480-dfu-usb.o
+
+i1480-dfu-usb-objs := \
+	dfu.o 	\
+	mac.o	\
+	phy.o	\
+	usb.o
+
+
diff --git a/drivers/uwb/i1480/dfu/dfu.c b/drivers/uwb/i1480/dfu/dfu.c
new file mode 100644
index 0000000..9097b3b
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/dfu.c
@@ -0,0 +1,217 @@
+/*
+ * Intel Wireless UWB Link 1480
+ * Main driver
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Common code for firmware upload used by the USB and PCI version;
+ * i1480_fw_upload() takes a device descriptor and uses the function
+ * pointers it provides to upload firmware and prepare the PHY.
+ *
+ * As well, provides common functions used by the rest of the code.
+ */
+#include "i1480-dfu.h"
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/device.h>
+#include <linux/uwb.h>
+#include <linux/random.h>
+
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+/**
+ * i1480_rceb_check - Check RCEB for expected field values
+ * @i1480: pointer to device for which RCEB is being checked
+ * @rceb: RCEB being checked
+ * @cmd: which command the RCEB is related to
+ * @context: expected context
+ * @expected_type: expected event type
+ * @expected_event: expected event
+ *
+ * If @cmd is NULL, do not print error messages, but still return an error
+ * code.
+ *
+ * Return 0 if @rceb matches the expected values, -EINVAL otherwise.
+ */
+int i1480_rceb_check(const struct i1480 *i1480, const struct uwb_rceb *rceb,
+		     const char *cmd, u8 context, u8 expected_type,
+		     unsigned expected_event)
+{
+	int result = 0;
+	struct device *dev = i1480->dev;
+	if (rceb->bEventContext != context) {
+		if (cmd)
+			dev_err(dev, "%s: unexpected context id 0x%02x "
+				"(expected 0x%02x)\n", cmd,
+				rceb->bEventContext, context);
+		result = -EINVAL;
+	}
+	if (rceb->bEventType != expected_type) {
+		if (cmd)
+			dev_err(dev, "%s: unexpected event type 0x%02x "
+				"(expected 0x%02x)\n", cmd,
+				rceb->bEventType, expected_type);
+		result = -EINVAL;
+	}
+	if (le16_to_cpu(rceb->wEvent) != expected_event) {
+		if (cmd)
+			dev_err(dev, "%s: unexpected event 0x%04x "
+				"(expected 0x%04x)\n", cmd,
+				le16_to_cpu(rceb->wEvent), expected_event);
+		result = -EINVAL;
+	}
+	return result;
+}
+EXPORT_SYMBOL_GPL(i1480_rceb_check);
+
+
+/**
+ * Execute a Radio Control Command
+ *
+ * Command data has to be in i1480->cmd_buf.
+ *
+ * @returns size of the reply data filled in i1480->evt_buf or < 0 errno
+ *          code on error.
+ */
+ssize_t i1480_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size,
+		  size_t reply_size)
+{
+	ssize_t result;
+	struct uwb_rceb *reply = i1480->evt_buf;
+	struct uwb_rccb *cmd = i1480->cmd_buf;
+	u16 expected_event = reply->wEvent;
+	u8 expected_type = reply->bEventType;
+	u8 context;
+
+	d_fnstart(3, i1480->dev, "(%p, %s, %zu)\n", i1480, cmd_name, cmd_size);
+	init_completion(&i1480->evt_complete);
+	i1480->evt_result = -EINPROGRESS;
+	do {
+		get_random_bytes(&context, 1);
+	} while (context == 0x00 || context == 0xff);
+	cmd->bCommandContext = context;
+	result = i1480->cmd(i1480, cmd_name, cmd_size);
+	if (result < 0)
+		goto error;
+	/* wait for the callback to report a event was received */
+	result = wait_for_completion_interruptible_timeout(
+		&i1480->evt_complete, HZ);
+	if (result == 0) {
+		result = -ETIMEDOUT;
+		goto error;
+	}
+	if (result < 0)
+		goto error;
+	result = i1480->evt_result;
+	if (result < 0) {
+		dev_err(i1480->dev, "%s: command reply reception failed: %zd\n",
+			cmd_name, result);
+		goto error;
+	}
+	/*
+	 * Firmware versions >= 1.4.12224 for IOGear GUWA100U generate a
+	 * spurious notification after firmware is downloaded. So check whether
+	 * the receibed RCEB is such notification before assuming that the
+	 * command has failed.
+	 */
+	if (i1480_rceb_check(i1480, i1480->evt_buf, NULL,
+			     0, 0xfd, 0x0022) == 0) {
+		/* Now wait for the actual RCEB for this command. */
+		result = i1480->wait_init_done(i1480);
+		if (result < 0)
+			goto error;
+		result = i1480->evt_result;
+	}
+	if (result != reply_size) {
+		dev_err(i1480->dev, "%s returned only %zu bytes, %zu expected\n",
+			cmd_name, result, reply_size);
+		result = -EINVAL;
+		goto error;
+	}
+	/* Verify we got the right event in response */
+	result = i1480_rceb_check(i1480, i1480->evt_buf, cmd_name, context,
+				  expected_type, expected_event);
+error:
+	d_fnend(3, i1480->dev, "(%p, %s, %zu) = %zd\n",
+		i1480, cmd_name, cmd_size, result);
+	return result;
+}
+EXPORT_SYMBOL_GPL(i1480_cmd);
+
+
+static
+int i1480_print_state(struct i1480 *i1480)
+{
+	int result;
+	u32 *buf = (u32 *) i1480->cmd_buf;
+
+	result = i1480->read(i1480, 0x80080000, 2 * sizeof(*buf));
+	if (result < 0) {
+		dev_err(i1480->dev, "cannot read U & L states: %d\n", result);
+		goto error;
+	}
+	dev_info(i1480->dev, "state U 0x%08x, L 0x%08x\n", buf[0], buf[1]);
+error:
+	return result;
+}
+
+
+/*
+ * PCI probe, firmware uploader
+ *
+ * _mac_fw_upload() will call rc_setup(), which needs an rc_release().
+ */
+int i1480_fw_upload(struct i1480 *i1480)
+{
+	int result;
+
+	result = i1480_pre_fw_upload(i1480);	/* PHY pre fw */
+	if (result < 0 && result != -ENOENT) {
+		i1480_print_state(i1480);
+		goto error;
+	}
+	result = i1480_mac_fw_upload(i1480);	/* MAC fw */
+	if (result < 0) {
+		if (result == -ENOENT)
+			dev_err(i1480->dev, "Cannot locate MAC FW file '%s'\n",
+				i1480->mac_fw_name);
+		else
+			i1480_print_state(i1480);
+		goto error;
+	}
+	result = i1480_phy_fw_upload(i1480);	/* PHY fw */
+	if (result < 0 && result != -ENOENT) {
+		i1480_print_state(i1480);
+		goto error_rc_release;
+	}
+	/*
+	 * FIXME: find some reliable way to check whether firmware is running
+	 * properly. Maybe use some standard request that has no side effects?
+	 */
+	dev_info(i1480->dev, "firmware uploaded successfully\n");
+error_rc_release:
+	if (i1480->rc_release)
+		i1480->rc_release(i1480);
+	result = 0;
+error:
+	return result;
+}
+EXPORT_SYMBOL_GPL(i1480_fw_upload);
diff --git a/drivers/uwb/i1480/dfu/i1480-dfu.h b/drivers/uwb/i1480/dfu/i1480-dfu.h
new file mode 100644
index 0000000..46f45e8
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/i1480-dfu.h
@@ -0,0 +1,260 @@
+/*
+ * i1480 Device Firmware Upload
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This driver is the firmware uploader for the Intel Wireless UWB
+ * Link 1480 device (both in the USB and PCI incarnations).
+ *
+ * The process is quite simple: we stop the device, write the firmware
+ * to its memory and then restart it. Wait for the device to let us
+ * know it is done booting firmware. Ready.
+ *
+ * We might have to upload before or after a phy firmware (which might
+ * be done in two methods, using a normal firmware image or through
+ * the MPI port).
+ *
+ * Because USB and PCI use common methods, we just make ops out of the
+ * common operations (read, write, wait_init_done and cmd) and
+ * implement them in usb.c and pci.c.
+ *
+ * The flow is (some parts omitted):
+ *
+ * i1480_{usb,pci}_probe()	  On enumerate/discovery
+ *   i1480_fw_upload()
+ *     i1480_pre_fw_upload()
+ *       __mac_fw_upload()
+ *         fw_hdrs_load()
+ *         mac_fw_hdrs_push()
+ *           i1480->write()       [i1480_{usb,pci}_write()]
+ *           i1480_fw_cmp()
+ *             i1480->read()      [i1480_{usb,pci}_read()]
+ *     i1480_mac_fw_upload()
+ *       __mac_fw_upload()
+ *       i1480->setup(()
+ *       i1480->wait_init_done()
+ *       i1480_cmd_reset()
+ *         i1480->cmd()           [i1480_{usb,pci}_cmd()]
+ *         ...
+ *     i1480_phy_fw_upload()
+ *       request_firmware()
+ *       i1480_mpi_write()
+ *         i1480->cmd()           [i1480_{usb,pci}_cmd()]
+ *
+ * Once the probe function enumerates the device and uploads the
+ * firmware, we just exit with -ENODEV, as we don't really want to
+ * attach to the device.
+ */
+#ifndef __i1480_DFU_H__
+#define __i1480_DFU_H__
+
+#include <linux/uwb/spec.h>
+#include <linux/types.h>
+#include <linux/completion.h>
+
+#define i1480_FW_UPLOAD_MODE_MASK (cpu_to_le32(0x00000018))
+
+#if i1480_FW > 0x00000302
+#define i1480_RCEB_EXTENDED
+#endif
+
+struct uwb_rccb;
+struct uwb_rceb;
+
+/*
+ * Common firmware upload handlers
+ *
+ * Normally you embed this struct in another one specific to your hw.
+ *
+ * @write	Write to device's memory from buffer.
+ * @read	Read from device's memory to i1480->evt_buf.
+ * @setup	Setup device after basic firmware is uploaded
+ * @wait_init_done
+ *              Wait for the device to send a notification saying init
+ *              is done.
+ * @cmd         FOP for issuing the command to the hardware. The
+ *              command data is contained in i1480->cmd_buf and the size
+ *              is supplied as an argument. The command replied is put
+ *              in i1480->evt_buf and the size in i1480->evt_result (or if
+ *              an error, a < 0 errno code).
+ *
+ * @cmd_buf	Memory buffer used to send commands to the device.
+ *              Allocated by the upper layers i1480_fw_upload().
+ *              Size has to be @buf_size.
+ * @evt_buf	Memory buffer used to place the async notifications
+ *              received by the hw. Allocated by the upper layers
+ *              i1480_fw_upload().
+ *              Size has to be @buf_size.
+ * @cmd_complete
+ *              Low level driver uses this to notify code waiting afor
+ *              an event that the event has arrived and data is in
+ *              i1480->evt_buf (and size/result in i1480->evt_result).
+ * @hw_rev
+ *              Use this value to activate dfu code to support new revisions
+ *              of hardware.  i1480_init() sets this to a default value.
+ *              It should be updated by the USB and PCI code.
+ */
+struct i1480 {
+	struct device *dev;
+
+	int (*write)(struct i1480 *, u32 addr, const void *, size_t);
+	int (*read)(struct i1480 *, u32 addr, size_t);
+	int (*rc_setup)(struct i1480 *);
+	void (*rc_release)(struct i1480 *);
+	int (*wait_init_done)(struct i1480 *);
+	int (*cmd)(struct i1480 *, const char *cmd_name, size_t cmd_size);
+	const char *pre_fw_name;
+	const char *mac_fw_name;
+	const char *mac_fw_name_deprecate;	/* FIXME: Will go away */
+	const char *phy_fw_name;
+	u8 hw_rev;
+
+	size_t buf_size;	/* size of both evt_buf and cmd_buf */
+	void *evt_buf, *cmd_buf;
+	ssize_t evt_result;
+	struct completion evt_complete;
+};
+
+static inline
+void i1480_init(struct i1480 *i1480)
+{
+	i1480->hw_rev = 1;
+	init_completion(&i1480->evt_complete);
+}
+
+extern int i1480_fw_upload(struct i1480 *);
+extern int i1480_pre_fw_upload(struct i1480 *);
+extern int i1480_mac_fw_upload(struct i1480 *);
+extern int i1480_phy_fw_upload(struct i1480 *);
+extern ssize_t i1480_cmd(struct i1480 *, const char *, size_t, size_t);
+extern int i1480_rceb_check(const struct i1480 *,
+			    const struct uwb_rceb *, const char *, u8,
+			    u8, unsigned);
+
+enum {
+	/* Vendor specific command type */
+	i1480_CET_VS1 = 		0xfd,
+	/* i1480 commands */
+	i1480_CMD_SET_IP_MAS = 		0x000e,
+	i1480_CMD_GET_MAC_PHY_INFO = 	0x0003,
+	i1480_CMD_MPI_WRITE =		0x000f,
+	i1480_CMD_MPI_READ = 		0x0010,
+	/* i1480 events */
+#if i1480_FW > 0x00000302
+	i1480_EVT_CONFIRM = 		0x0002,
+	i1480_EVT_RM_INIT_DONE = 	0x0101,
+	i1480_EVT_DEV_ADD = 		0x0103,
+	i1480_EVT_DEV_RM = 		0x0104,
+	i1480_EVT_DEV_ID_CHANGE = 	0x0105,
+	i1480_EVT_GET_MAC_PHY_INFO =	i1480_CMD_GET_MAC_PHY_INFO,
+#else
+	i1480_EVT_CONFIRM = 		0x0002,
+	i1480_EVT_RM_INIT_DONE = 	0x0101,
+	i1480_EVT_DEV_ADD = 		0x0103,
+	i1480_EVT_DEV_RM = 		0x0104,
+	i1480_EVT_DEV_ID_CHANGE = 	0x0105,
+	i1480_EVT_GET_MAC_PHY_INFO =	i1480_EVT_CONFIRM,
+#endif
+};
+
+
+struct i1480_evt_confirm {
+	struct uwb_rceb rceb;
+#ifdef i1480_RCEB_EXTENDED
+	__le16 wParamLength;
+#endif
+	u8 bResultCode;
+} __attribute__((packed));
+
+
+struct i1480_rceb {
+	struct uwb_rceb rceb;
+#ifdef i1480_RCEB_EXTENDED
+	__le16 wParamLength;
+#endif
+} __attribute__((packed));
+
+
+/**
+ * Get MAC & PHY Information confirm event structure
+ *
+ * Confirm event returned by the command.
+ */
+struct i1480_evt_confirm_GMPI {
+#if i1480_FW > 0x00000302
+	struct uwb_rceb rceb;
+	__le16 wParamLength;
+	__le16 status;
+	u8 mac_addr[6];		/* EUI-64 bit IEEE address [still 8 bytes?] */
+	u8 dev_addr[2];
+	__le16 mac_fw_rev;	/* major = v >> 8; minor = v & 0xff */
+	u8 hw_rev;
+	u8 phy_vendor;
+	u8 phy_rev;		/* major v = >> 8; minor = v & 0xff */
+	__le16 mac_caps;
+	u8 phy_caps[3];
+	u8 key_stores;
+	__le16 mcast_addr_stores;
+	u8 sec_mode_supported;
+#else
+	struct uwb_rceb rceb;
+	u8 status;
+	u8 mac_addr[8];         /* EUI-64 bit IEEE address [still 8 bytes?] */
+	u8 dev_addr[2];
+	__le16 mac_fw_rev;      /* major = v >> 8; minor = v & 0xff */
+	__le16 phy_fw_rev;      /* major v = >> 8; minor = v & 0xff */
+	__le16 mac_caps;
+	u8 phy_caps;
+	u8 key_stores;
+	__le16 mcast_addr_stores;
+	u8 sec_mode_supported;
+#endif
+} __attribute__((packed));
+
+
+struct i1480_cmd_mpi_write {
+	struct uwb_rccb rccb;
+	__le16 size;
+	u8 data[];
+};
+
+
+struct i1480_cmd_mpi_read {
+	struct uwb_rccb rccb;
+	__le16 size;
+	struct {
+		u8 page, offset;
+	} __attribute__((packed)) data[];
+} __attribute__((packed));
+
+
+struct i1480_evt_mpi_read {
+	struct uwb_rceb rceb;
+#ifdef i1480_RCEB_EXTENDED
+	__le16 wParamLength;
+#endif
+	u8 bResultCode;
+	__le16 size;
+	struct {
+		u8 page, offset, value;
+	} __attribute__((packed)) data[];
+} __attribute__((packed));
+
+
+#endif /* #ifndef __i1480_DFU_H__ */
diff --git a/drivers/uwb/i1480/dfu/mac.c b/drivers/uwb/i1480/dfu/mac.c
new file mode 100644
index 0000000..2e4d8f0
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/mac.c
@@ -0,0 +1,527 @@
+/*
+ * Intel Wireless UWB Link 1480
+ * MAC Firmware upload implementation
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Implementation of the code for parsing the firmware file (extract
+ * the headers and binary code chunks) in the fw_*() functions. The
+ * code to upload pre and mac firmwares is the same, so it uses a
+ * common entry point in __mac_fw_upload(), which uses the i1480
+ * function pointers to push the firmware to the device.
+ */
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/uwb.h>
+#include "i1480-dfu.h"
+
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+/*
+ * Descriptor for a continuous segment of MAC fw data
+ */
+struct fw_hdr {
+	unsigned long address;
+	size_t length;
+	const u32 *bin;
+	struct fw_hdr *next;
+};
+
+
+/* Free a chain of firmware headers */
+static
+void fw_hdrs_free(struct fw_hdr *hdr)
+{
+	struct fw_hdr *next;
+
+	while (hdr) {
+		next = hdr->next;
+		kfree(hdr);
+		hdr = next;
+	}
+}
+
+
+/* Fill a firmware header descriptor from a memory buffer */
+static
+int fw_hdr_load(struct i1480 *i1480, struct fw_hdr *hdr, unsigned hdr_cnt,
+		const char *_data, const u32 *data_itr, const u32 *data_top)
+{
+	size_t hdr_offset =  (const char *) data_itr - _data;
+	size_t remaining_size = (void *) data_top - (void *) data_itr;
+	if (data_itr + 2 > data_top) {
+		dev_err(i1480->dev, "fw hdr #%u/%zu: EOF reached in header at "
+		       "offset %zu, limit %zu\n",
+		       hdr_cnt, hdr_offset,
+		       (const char *) data_itr + 2 - _data,
+		       (const char *) data_top - _data);
+		return -EINVAL;
+	}
+	hdr->next = NULL;
+	hdr->address = le32_to_cpu(*data_itr++);
+	hdr->length = le32_to_cpu(*data_itr++);
+	hdr->bin = data_itr;
+	if (hdr->length > remaining_size) {
+		dev_err(i1480->dev, "fw hdr #%u/%zu: EOF reached in data; "
+		       "chunk too long (%zu bytes), only %zu left\n",
+		       hdr_cnt, hdr_offset, hdr->length, remaining_size);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+
+/**
+ * Get a buffer where the firmware is supposed to be and create a
+ * chain of headers linking them together.
+ *
+ * @phdr: where to place the pointer to the first header (headers link
+ *        to the next via the @hdr->next ptr); need to free the whole
+ *        chain when done.
+ *
+ * @_data: Pointer to the data buffer.
+ *
+ * @_data_size: Size of the data buffer (bytes); data size has to be a
+ *              multiple of 4. Function will fail if not.
+ *
+ * Goes over the whole binary blob; reads the first chunk and creates
+ * a fw hdr from it (which points to where the data is in @_data and
+ * the length of the chunk); then goes on to the next chunk until
+ * done. Each header is linked to the next.
+ */
+static
+int fw_hdrs_load(struct i1480 *i1480, struct fw_hdr **phdr,
+		 const char *_data, size_t data_size)
+{
+	int result;
+	unsigned hdr_cnt = 0;
+	u32 *data = (u32 *) _data, *data_itr, *data_top;
+	struct fw_hdr *hdr, **prev_hdr = phdr;
+
+	result = -EINVAL;
+	/* Check size is ok and pointer is aligned */
+	if (data_size % sizeof(u32) != 0)
+		goto error;
+	if ((unsigned long) _data % sizeof(u16) != 0)
+		goto error;
+	*phdr = NULL;
+	data_itr = data;
+	data_top = (u32 *) (_data + data_size);
+	while (data_itr < data_top) {
+		result = -ENOMEM;
+		hdr = kmalloc(sizeof(*hdr), GFP_KERNEL);
+		if (hdr == NULL) {
+			dev_err(i1480->dev, "Cannot allocate fw header "
+			       "for chunk #%u\n", hdr_cnt);
+			goto error_alloc;
+		}
+		result = fw_hdr_load(i1480, hdr, hdr_cnt,
+				     _data, data_itr, data_top);
+		if (result < 0)
+			goto error_load;
+		data_itr += 2 + hdr->length;
+		*prev_hdr = hdr;
+		prev_hdr = &hdr->next;
+		hdr_cnt++;
+	};
+	*prev_hdr = NULL;
+	return 0;
+
+error_load:
+	kfree(hdr);
+error_alloc:
+	fw_hdrs_free(*phdr);
+error:
+	return result;
+}
+
+
+/**
+ * Compares a chunk of fw with one in the devices's memory
+ *
+ * @i1480:     Device instance
+ * @hdr:     Pointer to the firmware chunk
+ * @returns: 0 if equal, < 0 errno on error. If > 0, it is the offset
+ *           where the difference was found (plus one).
+ *
+ * Kind of dirty and simplistic, but does the trick in both the PCI
+ * and USB version. We do a quick[er] memcmp(), and if it fails, we do
+ * a byte-by-byte to find the offset.
+ */
+static
+ssize_t i1480_fw_cmp(struct i1480 *i1480, struct fw_hdr *hdr)
+{
+	ssize_t result = 0;
+	u32 src_itr = 0, cnt;
+	size_t size = hdr->length*sizeof(hdr->bin[0]);
+	size_t chunk_size;
+	u8 *bin = (u8 *) hdr->bin;
+
+	while (size > 0) {
+		chunk_size = size < i1480->buf_size ? size : i1480->buf_size;
+		result = i1480->read(i1480, hdr->address + src_itr, chunk_size);
+		if (result < 0) {
+			dev_err(i1480->dev, "error reading for verification: "
+				"%zd\n", result);
+			goto error;
+		}
+		if (memcmp(i1480->cmd_buf, bin + src_itr, result)) {
+			u8 *buf = i1480->cmd_buf;
+			d_printf(2, i1480->dev,
+				 "original data @ %p + %u, %zu bytes\n",
+				 bin, src_itr, result);
+			d_dump(4, i1480->dev, bin + src_itr, result);
+			for (cnt = 0; cnt < result; cnt++)
+				if (bin[src_itr + cnt] != buf[cnt]) {
+					dev_err(i1480->dev, "byte failed at "
+						"src_itr %u cnt %u [0x%02x "
+						"vs 0x%02x]\n", src_itr, cnt,
+						bin[src_itr + cnt], buf[cnt]);
+					result = src_itr + cnt + 1;
+					goto cmp_failed;
+				}
+		}
+		src_itr += result;
+		size -= result;
+	}
+	result = 0;
+error:
+cmp_failed:
+	return result;
+}
+
+
+/**
+ * Writes firmware headers to the device.
+ *
+ * @prd:     PRD instance
+ * @hdr:     Processed firmware
+ * @returns: 0 if ok, < 0 errno on error.
+ */
+static
+int mac_fw_hdrs_push(struct i1480 *i1480, struct fw_hdr *hdr,
+		     const char *fw_name, const char *fw_tag)
+{
+	struct device *dev = i1480->dev;
+	ssize_t result = 0;
+	struct fw_hdr *hdr_itr;
+	int verif_retry_count;
+
+	d_fnstart(3, dev, "(%p, %p)\n", i1480, hdr);
+	/* Now, header by header, push them to the hw */
+	for (hdr_itr = hdr; hdr_itr != NULL; hdr_itr = hdr_itr->next) {
+		verif_retry_count = 0;
+retry:
+		dev_dbg(dev, "fw chunk (%zu @ 0x%08lx)\n",
+			hdr_itr->length * sizeof(hdr_itr->bin[0]),
+			hdr_itr->address);
+		result = i1480->write(i1480, hdr_itr->address, hdr_itr->bin,
+				    hdr_itr->length*sizeof(hdr_itr->bin[0]));
+		if (result < 0) {
+			dev_err(dev, "%s fw '%s': write failed (%zuB @ 0x%lx):"
+				" %zd\n", fw_tag, fw_name,
+				hdr_itr->length * sizeof(hdr_itr->bin[0]),
+				hdr_itr->address, result);
+			break;
+		}
+		result = i1480_fw_cmp(i1480, hdr_itr);
+		if (result < 0) {
+			dev_err(dev, "%s fw '%s': verification read "
+				"failed (%zuB @ 0x%lx): %zd\n",
+				fw_tag, fw_name,
+				hdr_itr->length * sizeof(hdr_itr->bin[0]),
+				hdr_itr->address, result);
+			break;
+		}
+		if (result > 0) {	/* Offset where it failed + 1 */
+			result--;
+			dev_err(dev, "%s fw '%s': WARNING: verification "
+				"failed at 0x%lx: retrying\n",
+				fw_tag, fw_name, hdr_itr->address + result);
+			if (++verif_retry_count < 3)
+				goto retry;	/* write this block again! */
+			dev_err(dev, "%s fw '%s': verification failed at 0x%lx: "
+				"tried %d times\n", fw_tag, fw_name,
+				hdr_itr->address + result, verif_retry_count);
+			result = -EINVAL;
+			break;
+		}
+	}
+	d_fnend(3, dev, "(%zd)\n", result);
+	return result;
+}
+
+
+/** Puts the device in firmware upload mode.*/
+static
+int mac_fw_upload_enable(struct i1480 *i1480)
+{
+	int result;
+	u32 reg = 0x800000c0;
+	u32 *buffer = (u32 *)i1480->cmd_buf;
+
+	if (i1480->hw_rev > 1)
+		reg = 0x8000d0d4;
+	result = i1480->read(i1480, reg, sizeof(u32));
+	if (result < 0)
+		goto error_cmd;
+	*buffer &= ~i1480_FW_UPLOAD_MODE_MASK;
+	result = i1480->write(i1480, reg, buffer, sizeof(u32));
+	if (result < 0)
+		goto error_cmd;
+	return 0;
+error_cmd:
+	dev_err(i1480->dev, "can't enable fw upload mode: %d\n", result);
+	return result;
+}
+
+
+/** Gets the device out of firmware upload mode. */
+static
+int mac_fw_upload_disable(struct i1480 *i1480)
+{
+	int result;
+	u32 reg = 0x800000c0;
+	u32 *buffer = (u32 *)i1480->cmd_buf;
+
+	if (i1480->hw_rev > 1)
+		reg = 0x8000d0d4;
+	result = i1480->read(i1480, reg, sizeof(u32));
+	if (result < 0)
+		goto error_cmd;
+	*buffer |= i1480_FW_UPLOAD_MODE_MASK;
+	result = i1480->write(i1480, reg, buffer, sizeof(u32));
+	if (result < 0)
+		goto error_cmd;
+	return 0;
+error_cmd:
+	dev_err(i1480->dev, "can't disable fw upload mode: %d\n", result);
+	return result;
+}
+
+
+
+/**
+ * Generic function for uploading a MAC firmware.
+ *
+ * @i1480:     Device instance
+ * @fw_name: Name of firmware file to upload.
+ * @fw_tag:  Name of the firmware type (for messages)
+ *           [eg: MAC, PRE]
+ * @do_wait: Wait for device to emit initialization done message (0
+ *           for PRE fws, 1 for MAC fws).
+ * @returns: 0 if ok, < 0 errno on error.
+ */
+static
+int __mac_fw_upload(struct i1480 *i1480, const char *fw_name,
+		    const char *fw_tag)
+{
+	int result;
+	const struct firmware *fw;
+	struct fw_hdr *fw_hdrs;
+
+	d_fnstart(3, i1480->dev, "(%p, %s, %s)\n", i1480, fw_name, fw_tag);
+	result = request_firmware(&fw, fw_name, i1480->dev);
+	if (result < 0)	/* Up to caller to complain on -ENOENT */
+		goto out;
+	d_printf(3, i1480->dev, "%s fw '%s': uploading\n", fw_tag, fw_name);
+	result = fw_hdrs_load(i1480, &fw_hdrs, fw->data, fw->size);
+	if (result < 0) {
+		dev_err(i1480->dev, "%s fw '%s': failed to parse firmware "
+			"file: %d\n", fw_tag, fw_name, result);
+		goto out_release;
+	}
+	result = mac_fw_upload_enable(i1480);
+	if (result < 0)
+		goto out_hdrs_release;
+	result = mac_fw_hdrs_push(i1480, fw_hdrs, fw_name, fw_tag);
+	mac_fw_upload_disable(i1480);
+out_hdrs_release:
+	if (result >= 0)
+		dev_info(i1480->dev, "%s fw '%s': uploaded\n", fw_tag, fw_name);
+	else
+		dev_err(i1480->dev, "%s fw '%s': failed to upload (%d), "
+			"power cycle device\n", fw_tag, fw_name, result);
+	fw_hdrs_free(fw_hdrs);
+out_release:
+	release_firmware(fw);
+out:
+	d_fnend(3, i1480->dev, "(%p, %s, %s) = %d\n", i1480, fw_name, fw_tag,
+		result);
+	return result;
+}
+
+
+/**
+ * Upload a pre-PHY firmware
+ *
+ */
+int i1480_pre_fw_upload(struct i1480 *i1480)
+{
+	int result;
+	result = __mac_fw_upload(i1480, i1480->pre_fw_name, "PRE");
+	if (result == 0)
+		msleep(400);
+	return result;
+}
+
+
+/**
+ * Reset a the MAC and PHY
+ *
+ * @i1480:     Device's instance
+ * @returns: 0 if ok, < 0 errno code on error
+ *
+ * We put the command on kmalloc'ed memory as some arches cannot do
+ * USB from the stack. The reply event is copied from an stage buffer,
+ * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details.
+ *
+ * We issue the reset to make sure the UWB controller reinits the PHY;
+ * this way we can now if the PHY init went ok.
+ */
+static
+int i1480_cmd_reset(struct i1480 *i1480)
+{
+	int result;
+	struct uwb_rccb *cmd = (void *) i1480->cmd_buf;
+	struct i1480_evt_reset {
+		struct uwb_rceb rceb;
+		u8 bResultCode;
+	} __attribute__((packed)) *reply = (void *) i1480->evt_buf;
+
+	result = -ENOMEM;
+	cmd->bCommandType = UWB_RC_CET_GENERAL;
+	cmd->wCommand = cpu_to_le16(UWB_RC_CMD_RESET);
+	reply->rceb.bEventType = UWB_RC_CET_GENERAL;
+	reply->rceb.wEvent = UWB_RC_CMD_RESET;
+	result = i1480_cmd(i1480, "RESET", sizeof(*cmd), sizeof(*reply));
+	if (result < 0)
+		goto out;
+	if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(i1480->dev, "RESET: command execution failed: %u\n",
+			reply->bResultCode);
+		result = -EIO;
+	}
+out:
+	return result;
+
+}
+
+
+/* Wait for the MAC FW to start running */
+static
+int i1480_fw_is_running_q(struct i1480 *i1480)
+{
+	int cnt = 0;
+	int result;
+	u32 *val = (u32 *) i1480->cmd_buf;
+
+	d_fnstart(3, i1480->dev, "(i1480 %p)\n", i1480);
+	for (cnt = 0; cnt < 10; cnt++) {
+		msleep(100);
+		result = i1480->read(i1480, 0x80080000, 4);
+		if (result < 0) {
+			dev_err(i1480->dev, "Can't read 0x8008000: %d\n", result);
+			goto out;
+		}
+		if (*val == 0x55555555UL)	/* fw running? cool */
+			goto out;
+	}
+	dev_err(i1480->dev, "Timed out waiting for fw to start\n");
+	result = -ETIMEDOUT;
+out:
+	d_fnend(3, i1480->dev, "(i1480 %p) = %d\n", i1480, result);
+	return result;
+
+}
+
+
+/**
+ * Upload MAC firmware, wait for it to start
+ *
+ * @i1480:     Device instance
+ * @fw_name: Name of the file that contains the firmware
+ *
+ * This has to be called after the pre fw has been uploaded (if
+ * there is any).
+ */
+int i1480_mac_fw_upload(struct i1480 *i1480)
+{
+	int result = 0, deprecated_name = 0;
+	struct i1480_rceb *rcebe = (void *) i1480->evt_buf;
+
+	d_fnstart(3, i1480->dev, "(%p)\n", i1480);
+	result = __mac_fw_upload(i1480, i1480->mac_fw_name, "MAC");
+	if (result == -ENOENT) {
+		result = __mac_fw_upload(i1480, i1480->mac_fw_name_deprecate,
+					 "MAC");
+		deprecated_name = 1;
+	}
+	if (result < 0)
+		return result;
+	if (deprecated_name == 1)
+		dev_warn(i1480->dev,
+			 "WARNING: firmware file name %s is deprecated, "
+			 "please rename to %s\n",
+			 i1480->mac_fw_name_deprecate, i1480->mac_fw_name);
+	result = i1480_fw_is_running_q(i1480);
+	if (result < 0)
+		goto error_fw_not_running;
+	result = i1480->rc_setup ? i1480->rc_setup(i1480) : 0;
+	if (result < 0) {
+		dev_err(i1480->dev, "Cannot setup after MAC fw upload: %d\n",
+			result);
+		goto error_setup;
+	}
+	result = i1480->wait_init_done(i1480);	/* wait init'on */
+	if (result < 0) {
+		dev_err(i1480->dev, "MAC fw '%s': Initialization timed out "
+			"(%d)\n", i1480->mac_fw_name, result);
+		goto error_init_timeout;
+	}
+	/* verify we got the right initialization done event */
+	if (i1480->evt_result != sizeof(*rcebe)) {
+		dev_err(i1480->dev, "MAC fw '%s': initialization event returns "
+			"wrong size (%zu bytes vs %zu needed)\n",
+			i1480->mac_fw_name, i1480->evt_result, sizeof(*rcebe));
+		dump_bytes(i1480->dev, rcebe, min(i1480->evt_result, (ssize_t)32));
+		goto error_size;
+	}
+	result = -EIO;
+	if (i1480_rceb_check(i1480, &rcebe->rceb, NULL, 0, i1480_CET_VS1,
+			     i1480_EVT_RM_INIT_DONE) < 0) {
+		dev_err(i1480->dev, "wrong initialization event 0x%02x/%04x/%02x "
+			"received; expected 0x%02x/%04x/00\n",
+			rcebe->rceb.bEventType, le16_to_cpu(rcebe->rceb.wEvent),
+			rcebe->rceb.bEventContext, i1480_CET_VS1,
+			i1480_EVT_RM_INIT_DONE);
+		goto error_init_timeout;
+	}
+	result = i1480_cmd_reset(i1480);
+	if (result < 0)
+		dev_err(i1480->dev, "MAC fw '%s': MBOA reset failed (%d)\n",
+			i1480->mac_fw_name, result);
+error_fw_not_running:
+error_init_timeout:
+error_size:
+error_setup:
+	d_fnend(3, i1480->dev, "(i1480 %p) = %d\n", i1480, result);
+	return result;
+}
diff --git a/drivers/uwb/i1480/dfu/phy.c b/drivers/uwb/i1480/dfu/phy.c
new file mode 100644
index 0000000..3b1a87d
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/phy.c
@@ -0,0 +1,203 @@
+/*
+ * Intel Wireless UWB Link 1480
+ * PHY parameters upload
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Code for uploading the PHY parameters to the PHY through the UWB
+ * Radio Control interface.
+ *
+ * We just send the data through the MPI interface using HWA-like
+ * commands and then reset the PHY to make sure it is ok.
+ */
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/usb/wusb.h>
+#include "i1480-dfu.h"
+
+
+/**
+ * Write a value array to an address of the MPI interface
+ *
+ * @i1480:	Device descriptor
+ * @data:	Data array to write
+ * @size:	Size of the data array
+ * @returns:	0 if ok, < 0 errno code on error.
+ *
+ * The data array is organized into pairs:
+ *
+ * ADDRESS VALUE
+ *
+ * ADDRESS is BE 16 bit unsigned, VALUE 8 bit unsigned. Size thus has
+ * to be a multiple of three.
+ */
+static
+int i1480_mpi_write(struct i1480 *i1480, const void *data, size_t size)
+{
+	int result;
+	struct i1480_cmd_mpi_write *cmd = i1480->cmd_buf;
+	struct i1480_evt_confirm *reply = i1480->evt_buf;
+
+	BUG_ON(size > 480);
+	result = -ENOMEM;
+	cmd->rccb.bCommandType = i1480_CET_VS1;
+	cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_WRITE);
+	cmd->size = cpu_to_le16(size);
+	memcpy(cmd->data, data, size);
+	reply->rceb.bEventType = i1480_CET_VS1;
+	reply->rceb.wEvent = i1480_CMD_MPI_WRITE;
+	result = i1480_cmd(i1480, "MPI-WRITE", sizeof(*cmd) + size, sizeof(*reply));
+	if (result < 0)
+		goto out;
+	if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(i1480->dev, "MPI-WRITE: command execution failed: %d\n",
+			reply->bResultCode);
+		result = -EIO;
+	}
+out:
+	return result;
+}
+
+
+/**
+ * Read a value array to from an address of the MPI interface
+ *
+ * @i1480:	Device descriptor
+ * @data:	where to place the read array
+ * @srcaddr:	Where to read from
+ * @size:	Size of the data read array
+ * @returns:	0 if ok, < 0 errno code on error.
+ *
+ * The command data array is organized into pairs ADDR0 ADDR1..., and
+ * the returned data in ADDR0 VALUE0 ADDR1 VALUE1...
+ *
+ * We generate the command array to be a sequential read and then
+ * rearrange the result.
+ *
+ * We use the i1480->cmd_buf for the command, i1480->evt_buf for the reply.
+ *
+ * As the reply has to fit in 512 bytes (i1480->evt_buffer), the max amount
+ * of values we can read is (512 - sizeof(*reply)) / 3
+ */
+static
+int i1480_mpi_read(struct i1480 *i1480, u8 *data, u16 srcaddr, size_t size)
+{
+	int result;
+	struct i1480_cmd_mpi_read *cmd = i1480->cmd_buf;
+	struct i1480_evt_mpi_read *reply = i1480->evt_buf;
+	unsigned cnt;
+
+	memset(i1480->cmd_buf, 0x69, 512);
+	memset(i1480->evt_buf, 0x69, 512);
+
+	BUG_ON(size > (i1480->buf_size - sizeof(*reply)) / 3);
+	result = -ENOMEM;
+	cmd->rccb.bCommandType = i1480_CET_VS1;
+	cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_READ);
+	cmd->size = cpu_to_le16(3*size);
+	for (cnt = 0; cnt < size; cnt++) {
+		cmd->data[cnt].page = (srcaddr + cnt) >> 8;
+		cmd->data[cnt].offset = (srcaddr + cnt) & 0xff;
+	}
+	reply->rceb.bEventType = i1480_CET_VS1;
+	reply->rceb.wEvent = i1480_CMD_MPI_READ;
+	result = i1480_cmd(i1480, "MPI-READ", sizeof(*cmd) + 2*size,
+			sizeof(*reply) + 3*size);
+	if (result < 0)
+		goto out;
+	if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(i1480->dev, "MPI-READ: command execution failed: %d\n",
+			reply->bResultCode);
+		result = -EIO;
+	}
+	for (cnt = 0; cnt < size; cnt++) {
+		if (reply->data[cnt].page != (srcaddr + cnt) >> 8)
+			dev_err(i1480->dev, "MPI-READ: page inconsistency at "
+				"index %u: expected 0x%02x, got 0x%02x\n", cnt,
+				(srcaddr + cnt) >> 8, reply->data[cnt].page);
+		if (reply->data[cnt].offset != ((srcaddr + cnt) & 0x00ff))
+			dev_err(i1480->dev, "MPI-READ: offset inconsistency at "
+				"index %u: expected 0x%02x, got 0x%02x\n", cnt,
+				(srcaddr + cnt) & 0x00ff,
+				reply->data[cnt].offset);
+		data[cnt] = reply->data[cnt].value;
+	}
+	result = 0;
+out:
+	return result;
+}
+
+
+/**
+ * Upload a PHY firmware, wait for it to start
+ *
+ * @i1480:     Device instance
+ * @fw_name: Name of the file that contains the firmware
+ *
+ * We assume the MAC fw is up and running. This means we can use the
+ * MPI interface to write the PHY firmware. Once done, we issue an
+ * MBOA Reset, which will force the MAC to reset and reinitialize the
+ * PHY. If that works, we are ready to go.
+ *
+ * Max packet size for the MPI write is 512, so the max buffer is 480
+ * (which gives us 160 byte triads of MSB, LSB and VAL for the data).
+ */
+int i1480_phy_fw_upload(struct i1480 *i1480)
+{
+	int result;
+	const struct firmware *fw;
+	const char *data_itr, *data_top;
+	const size_t MAX_BLK_SIZE = 480;	/* 160 triads */
+	size_t data_size;
+	u8 phy_stat;
+
+	result = request_firmware(&fw, i1480->phy_fw_name, i1480->dev);
+	if (result < 0)
+		goto out;
+	/* Loop writing data in chunks as big as possible until done. */
+	for (data_itr = fw->data, data_top = data_itr + fw->size;
+	     data_itr < data_top; data_itr += MAX_BLK_SIZE) {
+		data_size = min(MAX_BLK_SIZE, (size_t) (data_top - data_itr));
+		result = i1480_mpi_write(i1480, data_itr, data_size);
+		if (result < 0)
+			goto error_mpi_write;
+	}
+	/* Read MPI page 0, offset 6; if 0, PHY was initialized correctly. */
+	result = i1480_mpi_read(i1480, &phy_stat, 0x0006, 1);
+	if (result < 0) {
+		dev_err(i1480->dev, "PHY: can't get status: %d\n", result);
+		goto error_mpi_status;
+	}
+	if (phy_stat != 0) {
+		result = -ENODEV;
+		dev_info(i1480->dev, "error, PHY not ready: %u\n", phy_stat);
+		goto error_phy_status;
+	}
+	dev_info(i1480->dev, "PHY fw '%s': uploaded\n", i1480->phy_fw_name);
+error_phy_status:
+error_mpi_status:
+error_mpi_write:
+	release_firmware(fw);
+	if (result < 0)
+		dev_err(i1480->dev, "PHY fw '%s': failed to upload (%d), "
+			"power cycle device\n", i1480->phy_fw_name, result);
+out:
+	return result;
+}
diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c
new file mode 100644
index 0000000..98eeeff
--- /dev/null
+++ b/drivers/uwb/i1480/dfu/usb.c
@@ -0,0 +1,500 @@
+/*
+ * Intel Wireless UWB Link 1480
+ * USB SKU firmware upload implementation
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This driver will prepare the i1480 device to behave as a real
+ * Wireless USB HWA adaptor by uploading the firmware.
+ *
+ * When the device is connected or driver is loaded, i1480_usb_probe()
+ * is called--this will allocate and initialize the device structure,
+ * fill in the pointers to the common functions (read, write,
+ * wait_init_done and cmd for HWA command execution) and once that is
+ * done, call the common firmware uploading routine. Then clean up and
+ * return -ENODEV, as we don't attach to the device.
+ *
+ * The rest are the basic ops we implement that the fw upload code
+ * uses to do its job. All the ops in the common code are i1480->NAME,
+ * the functions are i1480_usb_NAME().
+ */
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/usb.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/uwb.h>
+#include <linux/usb/wusb.h>
+#include <linux/usb/wusb-wa.h>
+#include "i1480-dfu.h"
+
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+
+struct i1480_usb {
+	struct i1480 i1480;
+	struct usb_device *usb_dev;
+	struct usb_interface *usb_iface;
+	struct urb *neep_urb;	/* URB for reading from EP1 */
+};
+
+
+static
+void i1480_usb_init(struct i1480_usb *i1480_usb)
+{
+	i1480_init(&i1480_usb->i1480);
+}
+
+
+static
+int i1480_usb_create(struct i1480_usb *i1480_usb, struct usb_interface *iface)
+{
+	struct usb_device *usb_dev = interface_to_usbdev(iface);
+	int result = -ENOMEM;
+
+	i1480_usb->usb_dev = usb_get_dev(usb_dev);	/* bind the USB device */
+	i1480_usb->usb_iface = usb_get_intf(iface);
+	usb_set_intfdata(iface, i1480_usb);		/* Bind the driver to iface0 */
+	i1480_usb->neep_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (i1480_usb->neep_urb == NULL)
+		goto error;
+	return 0;
+
+error:
+	usb_set_intfdata(iface, NULL);
+	usb_put_intf(iface);
+	usb_put_dev(usb_dev);
+	return result;
+}
+
+
+static
+void i1480_usb_destroy(struct i1480_usb *i1480_usb)
+{
+	usb_kill_urb(i1480_usb->neep_urb);
+	usb_free_urb(i1480_usb->neep_urb);
+	usb_set_intfdata(i1480_usb->usb_iface, NULL);
+	usb_put_intf(i1480_usb->usb_iface);
+	usb_put_dev(i1480_usb->usb_dev);
+}
+
+
+/**
+ * Write a buffer to a memory address in the i1480 device
+ *
+ * @i1480:  i1480 instance
+ * @memory_address:
+ *          Address where to write the data buffer to.
+ * @buffer: Buffer to the data
+ * @size:   Size of the buffer [has to be < 512].
+ * @returns: 0 if ok, < 0 errno code on error.
+ *
+ * Data buffers to USB cannot be on the stack or in vmalloc'ed areas,
+ * so we copy it to the local i1480 buffer before proceeding. In any
+ * case, we have a max size we can send, soooo.
+ */
+static
+int i1480_usb_write(struct i1480 *i1480, u32 memory_address,
+		    const void *buffer, size_t size)
+{
+	int result = 0;
+	struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
+	size_t buffer_size, itr = 0;
+
+	d_fnstart(3, i1480->dev, "(%p, 0x%08x, %p, %zu)\n",
+		  i1480, memory_address, buffer, size);
+	BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */
+	while (size > 0) {
+		buffer_size = size < i1480->buf_size ? size : i1480->buf_size;
+		memcpy(i1480->cmd_buf, buffer + itr, buffer_size);
+		result = usb_control_msg(
+			i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0),
+			0xf0, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			cpu_to_le16(memory_address & 0xffff),
+			cpu_to_le16((memory_address >> 16) & 0xffff),
+			i1480->cmd_buf, buffer_size, 100 /* FIXME: arbitrary */);
+		if (result < 0)
+			break;
+		d_printf(3, i1480->dev,
+			 "wrote @ 0x%08x %u bytes (of %zu bytes requested)\n",
+			 memory_address, result, buffer_size);
+		d_dump(4, i1480->dev, i1480->cmd_buf, result);
+		itr += result;
+		memory_address += result;
+		size -= result;
+	}
+	d_fnend(3, i1480->dev, "(%p, 0x%08x, %p, %zu) = %d\n",
+		i1480, memory_address, buffer, size, result);
+	return result;
+}
+
+
+/**
+ * Read a block [max size 512] of the device's memory to @i1480's buffer.
+ *
+ * @i1480: i1480 instance
+ * @memory_address:
+ *         Address where to read from.
+ * @size:  Size to read. Smaller than or equal to 512.
+ * @returns: >= 0 number of bytes written if ok, < 0 errno code on error.
+ *
+ * NOTE: if the memory address or block is incorrect, you might get a
+ *       stall or a different memory read. Caller has to verify the
+ *       memory address and size passed back in the @neh structure.
+ */
+static
+int i1480_usb_read(struct i1480 *i1480, u32 addr, size_t size)
+{
+	ssize_t result = 0, bytes = 0;
+	size_t itr, read_size = i1480->buf_size;
+	struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
+
+	d_fnstart(3, i1480->dev, "(%p, 0x%08x, %zu)\n",
+		  i1480, addr, size);
+	BUG_ON(size > i1480->buf_size);
+	BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */
+	BUG_ON(read_size > 512);
+
+	if (addr >= 0x8000d200 && addr < 0x8000d400)	/* Yeah, HW quirk */
+		read_size = 4;
+
+	for (itr = 0; itr < size; itr += read_size) {
+		size_t itr_addr = addr + itr;
+		size_t itr_size = min(read_size, size - itr);
+		result = usb_control_msg(
+			i1480_usb->usb_dev, usb_rcvctrlpipe(i1480_usb->usb_dev, 0),
+			0xf0, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			cpu_to_le16(itr_addr & 0xffff),
+			cpu_to_le16((itr_addr >> 16) & 0xffff),
+			i1480->cmd_buf + itr, itr_size,
+			100 /* FIXME: arbitrary */);
+		if (result < 0) {
+			dev_err(i1480->dev, "%s: USB read error: %zd\n",
+				__func__, result);
+			goto out;
+		}
+		if (result != itr_size) {
+			result = -EIO;
+			dev_err(i1480->dev,
+				"%s: partial read got only %zu bytes vs %zu expected\n",
+				__func__, result, itr_size);
+			goto out;
+		}
+		bytes += result;
+	}
+	result = bytes;
+out:
+	d_fnend(3, i1480->dev, "(%p, 0x%08x, %zu) = %zd\n",
+		i1480, addr, size, result);
+	if (result > 0)
+		d_dump(4, i1480->dev, i1480->cmd_buf, result);
+	return result;
+}
+
+
+/**
+ * Callback for reads on the notification/event endpoint
+ *
+ * Just enables the completion read handler.
+ */
+static
+void i1480_usb_neep_cb(struct urb *urb)
+{
+	struct i1480 *i1480 = urb->context;
+	struct device *dev = i1480->dev;
+
+	switch (urb->status) {
+	case 0:
+		break;
+	case -ECONNRESET:	/* Not an error, but a controlled situation; */
+	case -ENOENT:		/* (we killed the URB)...so, no broadcast */
+		dev_dbg(dev, "NEEP: reset/noent %d\n", urb->status);
+		break;
+	case -ESHUTDOWN:	/* going away! */
+		dev_dbg(dev, "NEEP: down %d\n", urb->status);
+		break;
+	default:
+		dev_err(dev, "NEEP: unknown status %d\n", urb->status);
+		break;
+	}
+	i1480->evt_result = urb->actual_length;
+	complete(&i1480->evt_complete);
+	return;
+}
+
+
+/**
+ * Wait for the MAC FW to initialize
+ *
+ * MAC FW sends a 0xfd/0101/00 notification to EP1 when done
+ * initializing. Get that notification into i1480->evt_buf; upper layer
+ * will verify it.
+ *
+ * Set i1480->evt_result with the result of getting the event or its
+ * size (if succesful).
+ *
+ * Delivers the data directly to i1480->evt_buf
+ */
+static
+int i1480_usb_wait_init_done(struct i1480 *i1480)
+{
+	int result;
+	struct device *dev = i1480->dev;
+	struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
+	struct usb_endpoint_descriptor *epd;
+
+	d_fnstart(3, dev, "(%p)\n", i1480);
+	init_completion(&i1480->evt_complete);
+	i1480->evt_result = -EINPROGRESS;
+	epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc;
+	usb_fill_int_urb(i1480_usb->neep_urb, i1480_usb->usb_dev,
+			 usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress),
+			 i1480->evt_buf, i1480->buf_size,
+			 i1480_usb_neep_cb, i1480, epd->bInterval);
+	result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL);
+	if (result < 0) {
+		dev_err(dev, "init done: cannot submit NEEP read: %d\n",
+			result);
+		goto error_submit;
+	}
+	/* Wait for the USB callback to get the data */
+	result = wait_for_completion_interruptible_timeout(
+		&i1480->evt_complete, HZ);
+	if (result <= 0) {
+		result = result == 0 ? -ETIMEDOUT : result;
+		goto error_wait;
+	}
+	usb_kill_urb(i1480_usb->neep_urb);
+	d_fnend(3, dev, "(%p) = 0\n", i1480);
+	return 0;
+
+error_wait:
+	usb_kill_urb(i1480_usb->neep_urb);
+error_submit:
+	i1480->evt_result = result;
+	d_fnend(3, dev, "(%p) = %d\n", i1480, result);
+	return result;
+}
+
+
+/**
+ * Generic function for issuing commands to the i1480
+ *
+ * @i1480:      i1480 instance
+ * @cmd_name:   Name of the command (for error messages)
+ * @cmd:        Pointer to command buffer
+ * @cmd_size:   Size of the command buffer
+ * @reply:      Buffer for the reply event
+ * @reply_size: Expected size back (including RCEB); the reply buffer
+ *              is assumed to be as big as this.
+ * @returns:    >= 0 size of the returned event data if ok,
+ *              < 0 errno code on error.
+ *
+ * Arms the NE handle, issues the command to the device and checks the
+ * basics of the reply event.
+ */
+static
+int i1480_usb_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size)
+{
+	int result;
+	struct device *dev = i1480->dev;
+	struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
+	struct usb_endpoint_descriptor *epd;
+	struct uwb_rccb *cmd = i1480->cmd_buf;
+	u8 iface_no;
+
+	d_fnstart(3, dev, "(%p, %s, %zu)\n", i1480, cmd_name, cmd_size);
+	/* Post a read on the notification & event endpoint */
+	iface_no = i1480_usb->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+	epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc;
+	usb_fill_int_urb(
+		i1480_usb->neep_urb, i1480_usb->usb_dev,
+		usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress),
+		i1480->evt_buf, i1480->buf_size,
+		i1480_usb_neep_cb, i1480, epd->bInterval);
+	result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL);
+	if (result < 0) {
+		dev_err(dev, "%s: cannot submit NEEP read: %d\n",
+			cmd_name, result);
+			goto error_submit_ep1;
+	}
+	/* Now post the command on EP0 */
+	result = usb_control_msg(
+		i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0),
+		WA_EXEC_RC_CMD,
+		USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
+		0, iface_no,
+		cmd, cmd_size,
+		100 /* FIXME: this is totally arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "%s: control request failed: %d\n",
+			cmd_name, result);
+		goto error_submit_ep0;
+	}
+	d_fnend(3, dev, "(%p, %s, %zu) = %d\n",
+		i1480, cmd_name, cmd_size, result);
+	return result;
+
+error_submit_ep0:
+	usb_kill_urb(i1480_usb->neep_urb);
+error_submit_ep1:
+	d_fnend(3, dev, "(%p, %s, %zu) = %d\n",
+		i1480, cmd_name, cmd_size, result);
+	return result;
+}
+
+
+/*
+ * Probe a i1480 device for uploading firmware.
+ *
+ * We attach only to interface #0, which is the radio control interface.
+ */
+static
+int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id)
+{
+	struct i1480_usb *i1480_usb;
+	struct i1480 *i1480;
+	struct device *dev = &iface->dev;
+	int result;
+
+	result = -ENODEV;
+	if (iface->cur_altsetting->desc.bInterfaceNumber != 0) {
+		dev_dbg(dev, "not attaching to iface %d\n",
+			iface->cur_altsetting->desc.bInterfaceNumber);
+		goto error;
+	}
+	if (iface->num_altsetting > 1
+	    && interface_to_usbdev(iface)->descriptor.idProduct == 0xbabe) {
+		/* Need altsetting #1 [HW QUIRK] or EP1 won't work */
+		result = usb_set_interface(interface_to_usbdev(iface), 0, 1);
+		if (result < 0)
+			dev_warn(dev,
+				 "can't set altsetting 1 on iface 0: %d\n",
+				 result);
+	}
+
+	result = -ENOMEM;
+	i1480_usb = kzalloc(sizeof(*i1480_usb), GFP_KERNEL);
+	if (i1480_usb == NULL) {
+		dev_err(dev, "Unable to allocate instance\n");
+		goto error;
+	}
+	i1480_usb_init(i1480_usb);
+
+	i1480 = &i1480_usb->i1480;
+	i1480->buf_size = 512;
+	i1480->cmd_buf = kmalloc(2 * i1480->buf_size, GFP_KERNEL);
+	if (i1480->cmd_buf == NULL) {
+		dev_err(dev, "Cannot allocate transfer buffers\n");
+		result = -ENOMEM;
+		goto error_buf_alloc;
+	}
+	i1480->evt_buf = i1480->cmd_buf + i1480->buf_size;
+
+	result = i1480_usb_create(i1480_usb, iface);
+	if (result < 0) {
+		dev_err(dev, "Cannot create instance: %d\n", result);
+		goto error_create;
+	}
+
+	/* setup the fops and upload the firmare */
+	i1480->pre_fw_name = "i1480-pre-phy-0.0.bin";
+	i1480->mac_fw_name = "i1480-usb-0.0.bin";
+	i1480->mac_fw_name_deprecate = "ptc-0.0.bin";
+	i1480->phy_fw_name = "i1480-phy-0.0.bin";
+	i1480->dev = &iface->dev;
+	i1480->write = i1480_usb_write;
+	i1480->read = i1480_usb_read;
+	i1480->rc_setup = NULL;
+	i1480->wait_init_done = i1480_usb_wait_init_done;
+	i1480->cmd = i1480_usb_cmd;
+
+	result = i1480_fw_upload(&i1480_usb->i1480);	/* the real thing */
+	if (result >= 0) {
+		usb_reset_device(i1480_usb->usb_dev);
+		result = -ENODEV;	/* we don't want to bind to the iface */
+	}
+	i1480_usb_destroy(i1480_usb);
+error_create:
+	kfree(i1480->cmd_buf);
+error_buf_alloc:
+	kfree(i1480_usb);
+error:
+	return result;
+}
+
+#define i1480_USB_DEV(v, p)				\
+{							\
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE	\
+		 | USB_DEVICE_ID_MATCH_DEV_INFO		\
+		 | USB_DEVICE_ID_MATCH_INT_INFO,	\
+	.idVendor = (v),				\
+	.idProduct = (p),				\
+	.bDeviceClass = 0xff,				\
+	.bDeviceSubClass = 0xff,			\
+	.bDeviceProtocol = 0xff,			\
+	.bInterfaceClass = 0xff,			\
+	.bInterfaceSubClass = 0xff,			\
+	.bInterfaceProtocol = 0xff,			\
+}
+
+
+/** USB device ID's that we handle */
+static struct usb_device_id i1480_usb_id_table[] = {
+	i1480_USB_DEV(0x8086, 0xdf3b),
+	i1480_USB_DEV(0x15a9, 0x0005),
+	i1480_USB_DEV(0x07d1, 0x3802),
+	i1480_USB_DEV(0x050d, 0x305a),
+	i1480_USB_DEV(0x3495, 0x3007),
+	{},
+};
+MODULE_DEVICE_TABLE(usb, i1480_usb_id_table);
+
+
+static struct usb_driver i1480_dfu_driver = {
+	.name =		"i1480-dfu-usb",
+	.id_table =	i1480_usb_id_table,
+	.probe =	i1480_usb_probe,
+	.disconnect =	NULL,
+};
+
+
+/*
+ * Initialize the i1480 DFU driver.
+ *
+ * We also need to register our function for guessing event sizes.
+ */
+static int __init i1480_dfu_driver_init(void)
+{
+	return usb_register(&i1480_dfu_driver);
+}
+module_init(i1480_dfu_driver_init);
+
+
+static void __exit i1480_dfu_driver_exit(void)
+{
+	usb_deregister(&i1480_dfu_driver);
+}
+module_exit(i1480_dfu_driver_exit);
+
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Intel Wireless UWB Link 1480 firmware uploader for USB");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/i1480/i1480-est.c b/drivers/uwb/i1480/i1480-est.c
new file mode 100644
index 0000000..7bf8c6f
--- /dev/null
+++ b/drivers/uwb/i1480/i1480-est.c
@@ -0,0 +1,99 @@
+/*
+ * Intel Wireless UWB Link 1480
+ * Event Size tables for Wired Adaptors
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/uwb.h>
+#include "dfu/i1480-dfu.h"
+
+
+/** Event size table for wEvents 0x00XX */
+static struct uwb_est_entry i1480_est_fd00[] = {
+	/* Anybody expecting this response has to use
+	 * neh->extra_size to specify the real size that will
+	 * come back. */
+	[i1480_EVT_CONFIRM] = { .size = sizeof(struct i1480_evt_confirm) },
+	[i1480_CMD_SET_IP_MAS] = { .size = sizeof(struct i1480_evt_confirm) },
+#ifdef i1480_RCEB_EXTENDED
+	[0x09] = {
+		.size = sizeof(struct i1480_rceb),
+		.offset = 1 + offsetof(struct i1480_rceb, wParamLength),
+	},
+#endif
+};
+
+/** Event size table for wEvents 0x01XX */
+static struct uwb_est_entry i1480_est_fd01[] = {
+	[0xff & i1480_EVT_RM_INIT_DONE] = { .size = sizeof(struct i1480_rceb) },
+	[0xff & i1480_EVT_DEV_ADD] = { .size = sizeof(struct i1480_rceb) + 9 },
+	[0xff & i1480_EVT_DEV_RM] = { .size = sizeof(struct i1480_rceb) + 9 },
+	[0xff & i1480_EVT_DEV_ID_CHANGE] = {
+		.size = sizeof(struct i1480_rceb) + 2 },
+};
+
+static int i1480_est_init(void)
+{
+	int result = uwb_est_register(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b,
+				      i1480_est_fd00,
+				      ARRAY_SIZE(i1480_est_fd00));
+	if (result < 0) {
+		printk(KERN_ERR "Can't register EST table fd00: %d\n", result);
+		return result;
+	}
+	result = uwb_est_register(i1480_CET_VS1, 0x01, 0x8086, 0x0c3b,
+				  i1480_est_fd01, ARRAY_SIZE(i1480_est_fd01));
+	if (result < 0) {
+		printk(KERN_ERR "Can't register EST table fd01: %d\n", result);
+		return result;
+	}
+	return 0;
+}
+module_init(i1480_est_init);
+
+static void i1480_est_exit(void)
+{
+	uwb_est_unregister(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b,
+			   i1480_est_fd00, ARRAY_SIZE(i1480_est_fd00));
+	uwb_est_unregister(i1480_CET_VS1, 0x01, 0x8086, 0x0c3b,
+			   i1480_est_fd01, ARRAY_SIZE(i1480_est_fd01));
+}
+module_exit(i1480_est_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("i1480's Vendor Specific Event Size Tables");
+MODULE_LICENSE("GPL");
+
+/**
+ * USB device ID's that we handle
+ *
+ * [so we are loaded when this kind device is connected]
+ */
+static struct usb_device_id i1480_est_id_table[] = {
+	{ USB_DEVICE(0x8086, 0xdf3b), },
+	{ USB_DEVICE(0x8086, 0x0c3b), },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, i1480_est_id_table);
diff --git a/drivers/uwb/i1480/i1480-wlp.h b/drivers/uwb/i1480/i1480-wlp.h
new file mode 100644
index 0000000..18a8b0e
--- /dev/null
+++ b/drivers/uwb/i1480/i1480-wlp.h
@@ -0,0 +1,200 @@
+/*
+ * Intel 1480 Wireless UWB Link
+ * WLP specific definitions
+ *
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#ifndef __i1480_wlp_h__
+#define __i1480_wlp_h__
+
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/uwb.h>
+#include <linux/if_ether.h>
+#include <asm/byteorder.h>
+
+/* New simplified header format? */
+#undef WLP_HDR_FMT_2 		/* FIXME: rename */
+
+/**
+ * Values of the Delivery ID & Type field when PCA or DRP
+ *
+ * The Delivery ID & Type field in the WLP TX header indicates whether
+ * the frame is PCA or DRP. This is done based on the high level bit of
+ * this field.
+ * We use this constant to test if the traffic is PCA or DRP as follows:
+ * if (wlp_tx_hdr_delivery_id_type(wlp_tx_hdr) & WLP_DRP)
+ * 	this is DRP traffic
+ * else
+ * 	this is PCA traffic
+ */
+enum deliver_id_type_bit {
+	WLP_DRP = 8,
+};
+
+/**
+ * WLP TX header
+ *
+ * Indicates UWB/WLP-specific transmission parameters for a network
+ * packet.
+ */
+struct wlp_tx_hdr {
+	/* dword 0 */
+	struct uwb_dev_addr dstaddr;
+	u8                  key_index;
+	u8                  mac_params;
+	/* dword 1 */
+	u8                  phy_params;
+#ifndef WLP_HDR_FMT_2
+	u8                  reserved;
+	__le16              oui01;              /* FIXME: not so sure if __le16 or u8[2] */
+	/* dword 2 */
+	u8                  oui2;               /*        if all LE, it could be merged */
+	__le16              prid;
+#endif
+} __attribute__((packed));
+
+static inline int wlp_tx_hdr_delivery_id_type(const struct wlp_tx_hdr *hdr)
+{
+	return hdr->mac_params & 0x0f;
+}
+
+static inline int wlp_tx_hdr_ack_policy(const struct wlp_tx_hdr *hdr)
+{
+	return (hdr->mac_params >> 4) & 0x07;
+}
+
+static inline int wlp_tx_hdr_rts_cts(const struct wlp_tx_hdr *hdr)
+{
+	return (hdr->mac_params >> 7) & 0x01;
+}
+
+static inline void wlp_tx_hdr_set_delivery_id_type(struct wlp_tx_hdr *hdr, int id)
+{
+	hdr->mac_params = (hdr->mac_params & ~0x0f) | id;
+}
+
+static inline void wlp_tx_hdr_set_ack_policy(struct wlp_tx_hdr *hdr,
+					     enum uwb_ack_pol policy)
+{
+	hdr->mac_params = (hdr->mac_params & ~0x70) | (policy << 4);
+}
+
+static inline void wlp_tx_hdr_set_rts_cts(struct wlp_tx_hdr *hdr, int rts_cts)
+{
+	hdr->mac_params = (hdr->mac_params & ~0x80) | (rts_cts << 7);
+}
+
+static inline enum uwb_phy_rate wlp_tx_hdr_phy_rate(const struct wlp_tx_hdr *hdr)
+{
+	return hdr->phy_params & 0x0f;
+}
+
+static inline int wlp_tx_hdr_tx_power(const struct wlp_tx_hdr *hdr)
+{
+	return (hdr->phy_params >> 4) & 0x0f;
+}
+
+static inline void wlp_tx_hdr_set_phy_rate(struct wlp_tx_hdr *hdr, enum uwb_phy_rate rate)
+{
+	hdr->phy_params = (hdr->phy_params & ~0x0f) | rate;
+}
+
+static inline void wlp_tx_hdr_set_tx_power(struct wlp_tx_hdr *hdr, int pwr)
+{
+	hdr->phy_params = (hdr->phy_params & ~0xf0) | (pwr << 4);
+}
+
+
+/**
+ * WLP RX header
+ *
+ * Provides UWB/WLP-specific transmission data for a received
+ * network packet.
+ */
+struct wlp_rx_hdr {
+	/* dword 0 */
+	struct uwb_dev_addr dstaddr;
+	struct uwb_dev_addr srcaddr;
+	/* dword 1 */
+	u8 		    LQI;
+	s8		    RSSI;
+	u8		    reserved3;
+#ifndef WLP_HDR_FMT_2
+	u8 		    oui0;
+	/* dword 2 */
+	__le16		    oui12;
+	__le16		    prid;
+#endif
+} __attribute__((packed));
+
+
+/** User configurable options for WLP */
+struct wlp_options {
+	struct mutex mutex; /* access to user configurable options*/
+	struct wlp_tx_hdr def_tx_hdr;	/* default tx hdr */
+	u8 pca_base_priority;
+	u8 bw_alloc; /*index into bw_allocs[] for PCA/DRP reservations*/
+};
+
+
+static inline
+void wlp_options_init(struct wlp_options *options)
+{
+	mutex_init(&options->mutex);
+	wlp_tx_hdr_set_ack_policy(&options->def_tx_hdr, UWB_ACK_INM);
+	wlp_tx_hdr_set_rts_cts(&options->def_tx_hdr, 1);
+	/* FIXME: default to phy caps */
+	wlp_tx_hdr_set_phy_rate(&options->def_tx_hdr, UWB_PHY_RATE_480);
+#ifndef WLP_HDR_FMT_2
+	options->def_tx_hdr.prid = cpu_to_le16(0x0000);
+#endif
+}
+
+
+/* sysfs helpers */
+
+extern ssize_t uwb_pca_base_priority_store(struct wlp_options *,
+					   const char *, size_t);
+extern ssize_t uwb_pca_base_priority_show(const struct wlp_options *, char *);
+extern ssize_t uwb_bw_alloc_store(struct wlp_options *, const char *, size_t);
+extern ssize_t uwb_bw_alloc_show(const struct wlp_options *, char *);
+extern ssize_t uwb_ack_policy_store(struct wlp_options *,
+				    const char *, size_t);
+extern ssize_t uwb_ack_policy_show(const struct wlp_options *, char *);
+extern ssize_t uwb_rts_cts_store(struct wlp_options *, const char *, size_t);
+extern ssize_t uwb_rts_cts_show(const struct wlp_options *, char *);
+extern ssize_t uwb_phy_rate_store(struct wlp_options *, const char *, size_t);
+extern ssize_t uwb_phy_rate_show(const struct wlp_options *, char *);
+
+
+/** Simple bandwidth allocation (temporary and too simple) */
+struct wlp_bw_allocs {
+	const char *name;
+	struct {
+		u8 mask, stream;
+	} tx, rx;
+};
+
+
+#endif /* #ifndef __i1480_wlp_h__ */
diff --git a/drivers/uwb/i1480/i1480u-wlp/Makefile b/drivers/uwb/i1480/i1480u-wlp/Makefile
new file mode 100644
index 0000000..fe6709b
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/Makefile
@@ -0,0 +1,8 @@
+obj-$(CONFIG_UWB_I1480U_WLP) += i1480u-wlp.o
+
+i1480u-wlp-objs :=	\
+	lc.o		\
+	netdev.o	\
+	rx.o		\
+	sysfs.o		\
+	tx.o
diff --git a/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h b/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h
new file mode 100644
index 0000000..5f1b2951
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h
@@ -0,0 +1,284 @@
+/*
+ * Intel 1480 Wireless UWB Link USB
+ * Header formats, constants, general internal interfaces
+ *
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This is not an standard interface.
+ *
+ * FIXME: docs
+ *
+ * i1480u-wlp is pretty simple: two endpoints, one for tx, one for
+ * rx. rx is polled. Network packets (ethernet, whatever) are wrapped
+ * in i1480 TX or RX headers (for sending over the air), and these
+ * packets are wrapped in UNTD headers (for sending to the WLP UWB
+ * controller).
+ *
+ * UNTD packets (UNTD hdr + i1480 hdr + network packet) packets
+ * cannot be bigger than i1480u_MAX_FRG_SIZE. When this happens, the
+ * i1480 packet is broken in chunks/packets:
+ *
+ * UNTD-1st.hdr + i1480.hdr + payload
+ * UNTD-next.hdr + payload
+ * ...
+ * UNTD-last.hdr + payload
+ *
+ * so that each packet is smaller or equal than i1480u_MAX_FRG_SIZE.
+ *
+ * All HW structures and bitmaps are little endian, so we need to play
+ * ugly tricks when defining bitfields. Hoping for the day GCC
+ * implements __attribute__((endian(1234))).
+ *
+ * FIXME: ROADMAP to the whole implementation
+ */
+
+#ifndef __i1480u_wlp_h__
+#define __i1480u_wlp_h__
+
+#include <linux/usb.h>
+#include <linux/netdevice.h>
+#include <linux/uwb.h>		/* struct uwb_rc, struct uwb_notifs_handler */
+#include <linux/wlp.h>
+#include "../i1480-wlp.h"
+
+#undef i1480u_FLOW_CONTROL	/* Enable flow control code */
+
+/**
+ * Basic flow control
+ */
+enum {
+	i1480u_TX_INFLIGHT_MAX = 1000,
+	i1480u_TX_INFLIGHT_THRESHOLD = 100,
+};
+
+/** Maximum size of a transaction that we can tx/rx */
+enum {
+	/* Maximum packet size computed as follows: max UNTD header (8) +
+	 * i1480 RX header (8) + max Ethernet header and payload (4096) +
+	 * Padding added by skb_reserve (2) to make post Ethernet payload
+	 * start on 16 byte boundary*/
+	i1480u_MAX_RX_PKT_SIZE = 4114,
+	i1480u_MAX_FRG_SIZE = 512,
+	i1480u_RX_BUFS = 9,
+};
+
+
+/**
+ * UNTD packet type
+ *
+ * We need to fragment any payload whose UNTD packet is going to be
+ * bigger than i1480u_MAX_FRG_SIZE.
+ */
+enum i1480u_pkt_type {
+	i1480u_PKT_FRAG_1ST = 0x1,
+	i1480u_PKT_FRAG_NXT = 0x0,
+	i1480u_PKT_FRAG_LST = 0x2,
+	i1480u_PKT_FRAG_CMP = 0x3
+};
+enum {
+	i1480u_PKT_NONE = 0x4,
+};
+
+/** USB Network Transfer Descriptor - common */
+struct untd_hdr {
+	u8     type;
+	__le16 len;
+} __attribute__((packed));
+
+static inline enum i1480u_pkt_type untd_hdr_type(const struct untd_hdr *hdr)
+{
+	return hdr->type & 0x03;
+}
+
+static inline int untd_hdr_rx_tx(const struct untd_hdr *hdr)
+{
+	return (hdr->type >> 2) & 0x01;
+}
+
+static inline void untd_hdr_set_type(struct untd_hdr *hdr, enum i1480u_pkt_type type)
+{
+	hdr->type = (hdr->type & ~0x03) | type;
+}
+
+static inline void untd_hdr_set_rx_tx(struct untd_hdr *hdr, int rx_tx)
+{
+	hdr->type = (hdr->type & ~0x04) | (rx_tx << 2);
+}
+
+
+/**
+ * USB Network Transfer Descriptor - Complete Packet
+ *
+ * This is for a packet that is smaller (header + payload) than
+ * i1480u_MAX_FRG_SIZE.
+ *
+ * @hdr.total_len is the size of the payload; the payload doesn't
+ * count this header nor the padding, but includes the size of i1480
+ * header.
+ */
+struct untd_hdr_cmp {
+	struct untd_hdr	hdr;
+	u8		padding;
+} __attribute__((packed));
+
+
+/**
+ * USB Network Transfer Descriptor - First fragment
+ *
+ * @hdr.len is the size of the *whole packet* (excluding UNTD
+ * headers); @fragment_len is the size of the payload (excluding UNTD
+ * headers, but including i1480 headers).
+ */
+struct untd_hdr_1st {
+	struct untd_hdr	hdr;
+	__le16		fragment_len;
+	u8		padding[3];
+} __attribute__((packed));
+
+
+/**
+ * USB Network Transfer Descriptor - Next / Last [Rest]
+ *
+ * @hdr.len is the size of the payload, not including headrs.
+ */
+struct untd_hdr_rst {
+	struct untd_hdr	hdr;
+	u8		padding;
+} __attribute__((packed));
+
+
+/**
+ * Transmission context
+ *
+ * Wraps all the stuff needed to track a pending/active tx
+ * operation.
+ */
+struct i1480u_tx {
+	struct list_head list_node;
+	struct i1480u *i1480u;
+	struct urb *urb;
+
+	struct sk_buff *skb;
+	struct wlp_tx_hdr *wlp_tx_hdr;
+
+	void *buf;	/* if NULL, no new buf was used */
+	size_t buf_size;
+};
+
+/**
+ * Basic flow control
+ *
+ * We maintain a basic flow control counter. "count" how many TX URBs are
+ * outstanding. Only allow "max"
+ * TX URBs to be outstanding. If this value is reached the queue will be
+ * stopped. The queue will be restarted when there are
+ * "threshold" URBs outstanding.
+ * Maintain a counter of how many time the TX queue needed to be restarted
+ * due to the "max" being exceeded and the "threshold" reached again. The
+ * timestamp "restart_ts" is to keep track from when the counter was last
+ * queried (see sysfs handling of file wlp_tx_inflight).
+ */
+struct i1480u_tx_inflight {
+	atomic_t count;
+	unsigned long max;
+	unsigned long threshold;
+	unsigned long restart_ts;
+	atomic_t restart_count;
+};
+
+/**
+ * Instance of a i1480u WLP interface
+ *
+ * Keeps references to the USB device that wraps it, as well as it's
+ * interface and associated UWB host controller. As well, it also
+ * keeps a link to the netdevice for integration into the networking
+ * stack.
+ * We maintian separate error history for the tx and rx endpoints because
+ * the implementation does not rely on locking - having one shared
+ * structure between endpoints may cause problems. Adding locking to the
+ * implementation will have higher cost than adding a separate structure.
+ */
+struct i1480u {
+	struct usb_device *usb_dev;
+	struct usb_interface *usb_iface;
+	struct net_device *net_dev;
+
+	spinlock_t lock;
+	struct net_device_stats stats;
+
+	/* RX context handling */
+	struct sk_buff *rx_skb;
+	struct uwb_dev_addr rx_srcaddr;
+	size_t rx_untd_pkt_size;
+	struct i1480u_rx_buf {
+		struct i1480u *i1480u;	/* back pointer */
+		struct urb *urb;
+		struct sk_buff *data;	/* i1480u_MAX_RX_PKT_SIZE each */
+	} rx_buf[i1480u_RX_BUFS];	/* N bufs */
+
+	spinlock_t tx_list_lock;	/* TX context */
+	struct list_head tx_list;
+	u8 tx_stream;
+
+	struct stats lqe_stats, rssi_stats;	/* radio statistics */
+
+	/* Options we can set from sysfs */
+	struct wlp_options options;
+	struct uwb_notifs_handler uwb_notifs_handler;
+	struct edc tx_errors;
+	struct edc rx_errors;
+	struct wlp wlp;
+#ifdef i1480u_FLOW_CONTROL
+	struct urb *notif_urb;
+	struct edc notif_edc;		/* error density counter */
+	u8 notif_buffer[1];
+#endif
+	struct i1480u_tx_inflight tx_inflight;
+};
+
+/* Internal interfaces */
+extern void i1480u_rx_cb(struct urb *urb);
+extern int i1480u_rx_setup(struct i1480u *);
+extern void i1480u_rx_release(struct i1480u *);
+extern void i1480u_tx_release(struct i1480u *);
+extern int i1480u_xmit_frame(struct wlp *, struct sk_buff *,
+			     struct uwb_dev_addr *);
+extern void i1480u_stop_queue(struct wlp *);
+extern void i1480u_start_queue(struct wlp *);
+extern int i1480u_sysfs_setup(struct i1480u *);
+extern void i1480u_sysfs_release(struct i1480u *);
+
+/* netdev interface */
+extern int i1480u_open(struct net_device *);
+extern int i1480u_stop(struct net_device *);
+extern int i1480u_hard_start_xmit(struct sk_buff *, struct net_device *);
+extern void i1480u_tx_timeout(struct net_device *);
+extern int i1480u_set_config(struct net_device *, struct ifmap *);
+extern struct net_device_stats *i1480u_get_stats(struct net_device *);
+extern int i1480u_change_mtu(struct net_device *, int);
+extern void i1480u_uwb_notifs_cb(void *, struct uwb_dev *, enum uwb_notifs);
+
+/* bandwidth allocation callback */
+extern void  i1480u_bw_alloc_cb(struct uwb_rsv *);
+
+/* Sys FS */
+extern struct attribute_group i1480u_wlp_attr_group;
+
+#endif /* #ifndef __i1480u_wlp_h__ */
diff --git a/drivers/uwb/i1480/i1480u-wlp/lc.c b/drivers/uwb/i1480/i1480u-wlp/lc.c
new file mode 100644
index 0000000..737d60c
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/lc.c
@@ -0,0 +1,421 @@
+/*
+ * WUSB Wire Adapter: WLP interface
+ * Driver for the Linux Network stack.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * This implements a very simple network driver for the WLP USB
+ * device that is associated to a UWB (Ultra Wide Band) host.
+ *
+ * This is seen as an interface of a composite device. Once the UWB
+ * host has an association to another WLP capable device, the
+ * networking interface (aka WLP) can start to send packets back and
+ * forth.
+ *
+ * Limitations:
+ *
+ *  - Hand cranked; can't ifup the interface until there is an association
+ *
+ *  - BW allocation very simplistic [see i1480u_mas_set() and callees].
+ *
+ *
+ * ROADMAP:
+ *
+ *   ENTRY POINTS (driver model):
+ *
+ *     i1480u_driver_{exit,init}(): initialization of the driver.
+ *
+ *     i1480u_probe(): called by the driver code when a device
+ *                     matching 'i1480u_id_table' is connected.
+ *
+ *                     This allocs a netdev instance, inits with
+ *                     i1480u_add(), then registers_netdev().
+ *         i1480u_init()
+ *         i1480u_add()
+ *
+ *     i1480u_disconnect(): device has been disconnected/module
+ *                          is being removed.
+ *         i1480u_rm()
+ */
+#include <linux/version.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/uwb/debug.h>
+#include "i1480u-wlp.h"
+
+
+
+static inline
+void i1480u_init(struct i1480u *i1480u)
+{
+	/* nothing so far... doesn't it suck? */
+	spin_lock_init(&i1480u->lock);
+	INIT_LIST_HEAD(&i1480u->tx_list);
+	spin_lock_init(&i1480u->tx_list_lock);
+	wlp_options_init(&i1480u->options);
+	edc_init(&i1480u->tx_errors);
+	edc_init(&i1480u->rx_errors);
+#ifdef i1480u_FLOW_CONTROL
+	edc_init(&i1480u->notif_edc);
+#endif
+	stats_init(&i1480u->lqe_stats);
+	stats_init(&i1480u->rssi_stats);
+	wlp_init(&i1480u->wlp);
+}
+
+/**
+ * Fill WLP device information structure
+ *
+ * The structure will contain a few character arrays, each ending with a
+ * null terminated string. Each string has to fit (excluding terminating
+ * character) into a specified range obtained from the WLP substack.
+ *
+ * It is still not clear exactly how this device information should be
+ * obtained. Until we find out we use the USB device descriptor as backup, some
+ * information elements have intuitive mappings, other not.
+ */
+static
+void i1480u_fill_device_info(struct wlp *wlp, struct wlp_device_info *dev_info)
+{
+	struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp);
+	struct usb_device *usb_dev = i1480u->usb_dev;
+	/* Treat device name and model name the same */
+	if (usb_dev->descriptor.iProduct) {
+		usb_string(usb_dev, usb_dev->descriptor.iProduct,
+			   dev_info->name, sizeof(dev_info->name));
+		usb_string(usb_dev, usb_dev->descriptor.iProduct,
+			   dev_info->model_name, sizeof(dev_info->model_name));
+	}
+	if (usb_dev->descriptor.iManufacturer)
+		usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
+			   dev_info->manufacturer,
+			   sizeof(dev_info->manufacturer));
+	scnprintf(dev_info->model_nr, sizeof(dev_info->model_nr), "%04x",
+		  __le16_to_cpu(usb_dev->descriptor.bcdDevice));
+	if (usb_dev->descriptor.iSerialNumber)
+		usb_string(usb_dev, usb_dev->descriptor.iSerialNumber,
+			   dev_info->serial, sizeof(dev_info->serial));
+	/* FIXME: where should we obtain category? */
+	dev_info->prim_dev_type.category = cpu_to_le16(WLP_DEV_CAT_OTHER);
+	/* FIXME: Complete OUI and OUIsubdiv attributes */
+}
+
+#ifdef i1480u_FLOW_CONTROL
+/**
+ * Callback for the notification endpoint
+ *
+ * This mostly controls the xon/xoff protocol. In case of hard error,
+ * we stop the queue. If not, we always retry.
+ */
+static
+void i1480u_notif_cb(struct urb *urb, struct pt_regs *regs)
+{
+	struct i1480u *i1480u = urb->context;
+	struct usb_interface *usb_iface = i1480u->usb_iface;
+	struct device *dev = &usb_iface->dev;
+	int result;
+
+	switch (urb->status) {
+	case 0:				/* Got valid data, do xon/xoff */
+		switch (i1480u->notif_buffer[0]) {
+		case 'N':
+			dev_err(dev, "XOFF STOPPING queue at %lu\n", jiffies);
+			netif_stop_queue(i1480u->net_dev);
+			break;
+		case 'A':
+			dev_err(dev, "XON STARTING queue at %lu\n", jiffies);
+			netif_start_queue(i1480u->net_dev);
+			break;
+		default:
+			dev_err(dev, "NEP: unknown data 0x%02hhx\n",
+				i1480u->notif_buffer[0]);
+		}
+		break;
+	case -ECONNRESET:		/* Controlled situation ... */
+	case -ENOENT:			/* we killed the URB... */
+		dev_err(dev, "NEP: URB reset/noent %d\n", urb->status);
+		goto error;
+	case -ESHUTDOWN:		/* going away! */
+		dev_err(dev, "NEP: URB down %d\n", urb->status);
+		goto error;
+	default:			/* Retry unless it gets ugly */
+		if (edc_inc(&i1480u->notif_edc, EDC_MAX_ERRORS,
+			    EDC_ERROR_TIMEFRAME)) {
+			dev_err(dev, "NEP: URB max acceptable errors "
+				"exceeded; resetting device\n");
+			goto error_reset;
+		}
+		dev_err(dev, "NEP: URB error %d\n", urb->status);
+		break;
+	}
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result < 0) {
+		dev_err(dev, "NEP: Can't resubmit URB: %d; resetting device\n",
+			result);
+		goto error_reset;
+	}
+	return;
+
+error_reset:
+	wlp_reset_all(&i1480-wlp);
+error:
+	netif_stop_queue(i1480u->net_dev);
+	return;
+}
+#endif
+
+static
+int i1480u_add(struct i1480u *i1480u, struct usb_interface *iface)
+{
+	int result = -ENODEV;
+	struct wlp *wlp = &i1480u->wlp;
+	struct usb_device *usb_dev = interface_to_usbdev(iface);
+	struct net_device *net_dev = i1480u->net_dev;
+	struct uwb_rc *rc;
+	struct uwb_dev *uwb_dev;
+#ifdef i1480u_FLOW_CONTROL
+	struct usb_endpoint_descriptor *epd;
+#endif
+
+	i1480u->usb_dev = usb_get_dev(usb_dev);
+	i1480u->usb_iface = iface;
+	rc = uwb_rc_get_by_grandpa(&i1480u->usb_dev->dev);
+	if (rc == NULL) {
+		dev_err(&iface->dev, "Cannot get associated UWB Radio "
+			"Controller\n");
+		goto out;
+	}
+	wlp->xmit_frame = i1480u_xmit_frame;
+	wlp->fill_device_info = i1480u_fill_device_info;
+	wlp->stop_queue = i1480u_stop_queue;
+	wlp->start_queue = i1480u_start_queue;
+	result = wlp_setup(wlp, rc);
+	if (result < 0) {
+		dev_err(&iface->dev, "Cannot setup WLP\n");
+		goto error_wlp_setup;
+	}
+	result = 0;
+	ether_setup(net_dev);			/* make it an etherdevice */
+	uwb_dev = &rc->uwb_dev;
+	/* FIXME: hookup address change notifications? */
+
+	memcpy(net_dev->dev_addr, uwb_dev->mac_addr.data,
+	       sizeof(net_dev->dev_addr));
+
+	net_dev->hard_header_len = sizeof(struct untd_hdr_cmp)
+		+ sizeof(struct wlp_tx_hdr)
+		+ WLP_DATA_HLEN
+		+ ETH_HLEN;
+	net_dev->mtu = 3500;
+	net_dev->tx_queue_len = 20;		/* FIXME: maybe use 1000? */
+
+/*	net_dev->flags &= ~IFF_BROADCAST;	FIXME: BUG in firmware */
+	/* FIXME: multicast disabled */
+	net_dev->flags &= ~IFF_MULTICAST;
+	net_dev->features &= ~NETIF_F_SG;
+	net_dev->features &= ~NETIF_F_FRAGLIST;
+	/* All NETIF_F_*_CSUM disabled */
+	net_dev->features |= NETIF_F_HIGHDMA;
+	net_dev->watchdog_timeo = 5*HZ;		/* FIXME: a better default? */
+
+	net_dev->open = i1480u_open;
+	net_dev->stop = i1480u_stop;
+	net_dev->hard_start_xmit = i1480u_hard_start_xmit;
+	net_dev->tx_timeout = i1480u_tx_timeout;
+	net_dev->get_stats = i1480u_get_stats;
+	net_dev->set_config = i1480u_set_config;
+	net_dev->change_mtu = i1480u_change_mtu;
+
+#ifdef i1480u_FLOW_CONTROL
+	/* Notification endpoint setup (submitted when we open the device) */
+	i1480u->notif_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (i1480u->notif_urb == NULL) {
+		dev_err(&iface->dev, "Unable to allocate notification URB\n");
+		result = -ENOMEM;
+		goto error_urb_alloc;
+	}
+	epd = &iface->cur_altsetting->endpoint[0].desc;
+	usb_fill_int_urb(i1480u->notif_urb, usb_dev,
+			 usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
+			 i1480u->notif_buffer, sizeof(i1480u->notif_buffer),
+			 i1480u_notif_cb, i1480u, epd->bInterval);
+
+#endif
+
+	i1480u->tx_inflight.max = i1480u_TX_INFLIGHT_MAX;
+	i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD;
+	i1480u->tx_inflight.restart_ts = jiffies;
+	usb_set_intfdata(iface, i1480u);
+	return result;
+
+#ifdef i1480u_FLOW_CONTROL
+error_urb_alloc:
+#endif
+	wlp_remove(wlp);
+error_wlp_setup:
+	uwb_rc_put(rc);
+out:
+	usb_put_dev(i1480u->usb_dev);
+	return result;
+}
+
+static void i1480u_rm(struct i1480u *i1480u)
+{
+	struct uwb_rc *rc = i1480u->wlp.rc;
+	usb_set_intfdata(i1480u->usb_iface, NULL);
+#ifdef i1480u_FLOW_CONTROL
+	usb_kill_urb(i1480u->notif_urb);
+	usb_free_urb(i1480u->notif_urb);
+#endif
+	wlp_remove(&i1480u->wlp);
+	uwb_rc_put(rc);
+	usb_put_dev(i1480u->usb_dev);
+}
+
+/** Just setup @net_dev's i1480u private data */
+static void i1480u_netdev_setup(struct net_device *net_dev)
+{
+	struct i1480u *i1480u = netdev_priv(net_dev);
+	/* Initialize @i1480u */
+	memset(i1480u, 0, sizeof(*i1480u));
+	i1480u_init(i1480u);
+}
+
+/**
+ * Probe a i1480u interface and register it
+ *
+ * @iface:   USB interface to link to
+ * @id:      USB class/subclass/protocol id
+ * @returns: 0 if ok, < 0 errno code on error.
+ *
+ * Does basic housekeeping stuff and then allocs a netdev with space
+ * for the i1480u  data. Initializes, registers in i1480u, registers in
+ * netdev, ready to go.
+ */
+static int i1480u_probe(struct usb_interface *iface,
+			const struct usb_device_id *id)
+{
+	int result;
+	struct net_device *net_dev;
+	struct device *dev = &iface->dev;
+	struct i1480u *i1480u;
+
+	/* Allocate instance [calls i1480u_netdev_setup() on it] */
+	result = -ENOMEM;
+	net_dev = alloc_netdev(sizeof(*i1480u), "wlp%d", i1480u_netdev_setup);
+	if (net_dev == NULL) {
+		dev_err(dev, "no memory for network device instance\n");
+		goto error_alloc_netdev;
+	}
+	SET_NETDEV_DEV(net_dev, dev);
+	i1480u = netdev_priv(net_dev);
+	i1480u->net_dev = net_dev;
+	result = i1480u_add(i1480u, iface);	/* Now setup all the wlp stuff */
+	if (result < 0) {
+		dev_err(dev, "cannot add i1480u device: %d\n", result);
+		goto error_i1480u_add;
+	}
+	result = register_netdev(net_dev);	/* Okey dokey, bring it up */
+	if (result < 0) {
+		dev_err(dev, "cannot register network device: %d\n", result);
+		goto error_register_netdev;
+	}
+	i1480u_sysfs_setup(i1480u);
+	if (result < 0)
+		goto error_sysfs_init;
+	return 0;
+
+error_sysfs_init:
+	unregister_netdev(net_dev);
+error_register_netdev:
+	i1480u_rm(i1480u);
+error_i1480u_add:
+	free_netdev(net_dev);
+error_alloc_netdev:
+	return result;
+}
+
+
+/**
+ * Disconect a i1480u from the system.
+ *
+ * i1480u_stop() has been called before, so al the rx and tx contexts
+ * have been taken down already. Make sure the queue is stopped,
+ * unregister netdev and i1480u, free and kill.
+ */
+static void i1480u_disconnect(struct usb_interface *iface)
+{
+	struct i1480u *i1480u;
+	struct net_device *net_dev;
+
+	i1480u = usb_get_intfdata(iface);
+	net_dev = i1480u->net_dev;
+	netif_stop_queue(net_dev);
+#ifdef i1480u_FLOW_CONTROL
+	usb_kill_urb(i1480u->notif_urb);
+#endif
+	i1480u_sysfs_release(i1480u);
+	unregister_netdev(net_dev);
+	i1480u_rm(i1480u);
+	free_netdev(net_dev);
+}
+
+static struct usb_device_id i1480u_id_table[] = {
+	{
+		.match_flags = USB_DEVICE_ID_MATCH_DEVICE \
+				|  USB_DEVICE_ID_MATCH_DEV_INFO \
+				|  USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor = 0x8086,
+		.idProduct = 0x0c3b,
+		.bDeviceClass = 0xef,
+		.bDeviceSubClass = 0x02,
+		.bDeviceProtocol = 0x02,
+		.bInterfaceClass = 0xff,
+		.bInterfaceSubClass = 0xff,
+		.bInterfaceProtocol = 0xff,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(usb, i1480u_id_table);
+
+static struct usb_driver i1480u_driver = {
+	.name =		KBUILD_MODNAME,
+	.probe =	i1480u_probe,
+	.disconnect =	i1480u_disconnect,
+	.id_table =	i1480u_id_table,
+};
+
+static int __init i1480u_driver_init(void)
+{
+	return usb_register(&i1480u_driver);
+}
+module_init(i1480u_driver_init);
+
+
+static void __exit i1480u_driver_exit(void)
+{
+	usb_deregister(&i1480u_driver);
+}
+module_exit(i1480u_driver_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("i1480 Wireless UWB Link WLP networking for USB");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/i1480/i1480u-wlp/netdev.c b/drivers/uwb/i1480/i1480u-wlp/netdev.c
new file mode 100644
index 0000000..8802ac4
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/netdev.c
@@ -0,0 +1,368 @@
+/*
+ * WUSB Wire Adapter: WLP interface
+ * Driver for the Linux Network stack.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * Implementation of the netdevice linkage (except tx and rx related stuff).
+ *
+ * ROADMAP:
+ *
+ *   ENTRY POINTS (Net device):
+ *
+ *     i1480u_open(): Called when we ifconfig up the interface;
+ *                    associates to a UWB host controller, reserves
+ *                    bandwidth (MAS), sets up RX USB URB and starts
+ *                    the queue.
+ *
+ *     i1480u_stop(): Called when we ifconfig down a interface;
+ *                    reverses _open().
+ *
+ *     i1480u_set_config():
+ */
+
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/uwb/debug.h>
+#include "i1480u-wlp.h"
+
+struct i1480u_cmd_set_ip_mas {
+	struct uwb_rccb     rccb;
+	struct uwb_dev_addr addr;
+	u8                  stream;
+	u8                  owner;
+	u8                  type;	/* enum uwb_drp_type */
+	u8                  baMAS[32];
+} __attribute__((packed));
+
+
+static
+int i1480u_set_ip_mas(
+	struct uwb_rc *rc,
+	const struct uwb_dev_addr *dstaddr,
+	u8 stream, u8 owner, u8 type, unsigned long *mas)
+{
+
+	int result;
+	struct i1480u_cmd_set_ip_mas *cmd;
+	struct uwb_rc_evt_confirm reply;
+
+	result = -ENOMEM;
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		goto error_kzalloc;
+	cmd->rccb.bCommandType = 0xfd;
+	cmd->rccb.wCommand = cpu_to_le16(0x000e);
+	cmd->addr = *dstaddr;
+	cmd->stream = stream;
+	cmd->owner = owner;
+	cmd->type = type;
+	if (mas == NULL)
+		memset(cmd->baMAS, 0x00, sizeof(cmd->baMAS));
+	else
+		memcpy(cmd->baMAS, mas, sizeof(cmd->baMAS));
+	reply.rceb.bEventType = 0xfd;
+	reply.rceb.wEvent = cpu_to_le16(0x000e);
+	result = uwb_rc_cmd(rc, "SET-IP-MAS", &cmd->rccb, sizeof(*cmd),
+			    &reply.rceb, sizeof(reply));
+	if (result < 0)
+		goto error_cmd;
+	if (reply.bResultCode != UWB_RC_RES_FAIL) {
+		dev_err(&rc->uwb_dev.dev,
+			"SET-IP-MAS: command execution failed: %d\n",
+			reply.bResultCode);
+		result = -EIO;
+	}
+error_cmd:
+	kfree(cmd);
+error_kzalloc:
+	return result;
+}
+
+/*
+ * Inform a WLP interface of a MAS reservation
+ *
+ * @rc is assumed refcnted.
+ */
+/* FIXME: detect if remote device is WLP capable? */
+static int i1480u_mas_set_dev(struct uwb_dev *uwb_dev, struct uwb_rc *rc,
+			      u8 stream, u8 owner, u8 type, unsigned long *mas)
+{
+	int result = 0;
+	struct device *dev = &rc->uwb_dev.dev;
+
+	result = i1480u_set_ip_mas(rc, &uwb_dev->dev_addr, stream, owner,
+				   type, mas);
+	if (result < 0) {
+		char rcaddrbuf[UWB_ADDR_STRSIZE], devaddrbuf[UWB_ADDR_STRSIZE];
+		uwb_dev_addr_print(rcaddrbuf, sizeof(rcaddrbuf),
+				   &rc->uwb_dev.dev_addr);
+		uwb_dev_addr_print(devaddrbuf, sizeof(devaddrbuf),
+				   &uwb_dev->dev_addr);
+		dev_err(dev, "Set IP MAS (%s to %s) failed: %d\n",
+			rcaddrbuf, devaddrbuf, result);
+	}
+	return result;
+}
+
+/**
+ * Called by bandwidth allocator when change occurs in reservation.
+ *
+ * @rsv:     The reservation that is being established, modified, or
+ *           terminated.
+ *
+ * When a reservation is established, modified, or terminated the upper layer
+ * (WLP here) needs set/update the currently available Media Access Slots
+ * that can be use for IP traffic.
+ *
+ * Our action taken during failure depends on how the reservation is being
+ * changed:
+ * - if reservation is being established we do nothing if we cannot set the
+ *   new MAS to be used
+ * - if reservation is being terminated we revert back to PCA whether the
+ *   SET IP MAS command succeeds or not.
+ */
+void i1480u_bw_alloc_cb(struct uwb_rsv *rsv)
+{
+	int result = 0;
+	struct i1480u *i1480u = rsv->pal_priv;
+	struct device *dev = &i1480u->usb_iface->dev;
+	struct uwb_dev *target_dev = rsv->target.dev;
+	struct uwb_rc *rc = i1480u->wlp.rc;
+	u8 stream = rsv->stream;
+	int type = rsv->type;
+	int is_owner = rsv->owner == &rc->uwb_dev;
+	unsigned long *bmp = rsv->mas.bm;
+
+	dev_err(dev, "WLP callback called - sending set ip mas\n");
+	/*user cannot change options while setting configuration*/
+	mutex_lock(&i1480u->options.mutex);
+	switch (rsv->state) {
+	case UWB_RSV_STATE_T_ACCEPTED:
+	case UWB_RSV_STATE_O_ESTABLISHED:
+		result = i1480u_mas_set_dev(target_dev, rc, stream, is_owner,
+					type, bmp);
+		if (result < 0) {
+			dev_err(dev, "MAS reservation failed: %d\n", result);
+			goto out;
+		}
+		if (is_owner) {
+			wlp_tx_hdr_set_delivery_id_type(&i1480u->options.def_tx_hdr,
+							WLP_DRP | stream);
+			wlp_tx_hdr_set_rts_cts(&i1480u->options.def_tx_hdr, 0);
+		}
+		break;
+	case UWB_RSV_STATE_NONE:
+		/* revert back to PCA */
+		result = i1480u_mas_set_dev(target_dev, rc, stream, is_owner,
+					    type, bmp);
+		if (result < 0)
+			dev_err(dev, "MAS reservation failed: %d\n", result);
+		/* Revert to PCA even though SET IP MAS failed. */
+		wlp_tx_hdr_set_delivery_id_type(&i1480u->options.def_tx_hdr,
+						i1480u->options.pca_base_priority);
+		wlp_tx_hdr_set_rts_cts(&i1480u->options.def_tx_hdr, 1);
+		break;
+	default:
+		dev_err(dev, "unexpected WLP reservation state: %s (%d).\n",
+			uwb_rsv_state_str(rsv->state), rsv->state);
+		break;
+	}
+out:
+	mutex_unlock(&i1480u->options.mutex);
+	return;
+}
+
+/**
+ *
+ * Called on 'ifconfig up'
+ */
+int i1480u_open(struct net_device *net_dev)
+{
+	int result;
+	struct i1480u *i1480u = netdev_priv(net_dev);
+	struct wlp *wlp = &i1480u->wlp;
+	struct uwb_rc *rc;
+	struct device *dev = &i1480u->usb_iface->dev;
+
+	rc = wlp->rc;
+	result = i1480u_rx_setup(i1480u);		/* Alloc RX stuff */
+	if (result < 0)
+		goto error_rx_setup;
+	netif_wake_queue(net_dev);
+#ifdef i1480u_FLOW_CONTROL
+	result = usb_submit_urb(i1480u->notif_urb, GFP_KERNEL);;
+	if (result < 0) {
+		dev_err(dev, "Can't submit notification URB: %d\n", result);
+		goto error_notif_urb_submit;
+	}
+#endif
+	i1480u->uwb_notifs_handler.cb = i1480u_uwb_notifs_cb;
+	i1480u->uwb_notifs_handler.data = i1480u;
+	if (uwb_bg_joined(rc))
+		netif_carrier_on(net_dev);
+	else
+		netif_carrier_off(net_dev);
+	uwb_notifs_register(rc, &i1480u->uwb_notifs_handler);
+	/* Interface is up with an address, now we can create WSS */
+	result = wlp_wss_setup(net_dev, &wlp->wss);
+	if (result < 0) {
+		dev_err(dev, "Can't create WSS: %d. \n", result);
+		goto error_notif_deregister;
+	}
+	return 0;
+error_notif_deregister:
+	uwb_notifs_deregister(rc, &i1480u->uwb_notifs_handler);
+#ifdef i1480u_FLOW_CONTROL
+error_notif_urb_submit:
+#endif
+	netif_stop_queue(net_dev);
+	i1480u_rx_release(i1480u);
+error_rx_setup:
+	return result;
+}
+
+
+/**
+ * Called on 'ifconfig down'
+ */
+int i1480u_stop(struct net_device *net_dev)
+{
+	struct i1480u *i1480u = netdev_priv(net_dev);
+	struct wlp *wlp = &i1480u->wlp;
+	struct uwb_rc *rc = wlp->rc;
+
+	BUG_ON(wlp->rc == NULL);
+	wlp_wss_remove(&wlp->wss);
+	uwb_notifs_deregister(rc, &i1480u->uwb_notifs_handler);
+	netif_carrier_off(net_dev);
+#ifdef i1480u_FLOW_CONTROL
+	usb_kill_urb(i1480u->notif_urb);
+#endif
+	netif_stop_queue(net_dev);
+	i1480u_rx_release(i1480u);
+	i1480u_tx_release(i1480u);
+	return 0;
+}
+
+
+/** Report statistics */
+struct net_device_stats *i1480u_get_stats(struct net_device *net_dev)
+{
+	struct i1480u *i1480u = netdev_priv(net_dev);
+	return &i1480u->stats;
+}
+
+
+/**
+ *
+ * Change the interface config--we probably don't have to do anything.
+ */
+int i1480u_set_config(struct net_device *net_dev, struct ifmap *map)
+{
+	int result;
+	struct i1480u *i1480u = netdev_priv(net_dev);
+	BUG_ON(i1480u->wlp.rc == NULL);
+	result = 0;
+	return result;
+}
+
+/**
+ * Change the MTU of the interface
+ */
+int i1480u_change_mtu(struct net_device *net_dev, int mtu)
+{
+	static union {
+		struct wlp_tx_hdr tx;
+		struct wlp_rx_hdr rx;
+	} i1480u_all_hdrs;
+
+	if (mtu < ETH_HLEN)	/* We encap eth frames */
+		return -ERANGE;
+	if (mtu > 4000 - sizeof(i1480u_all_hdrs))
+		return -ERANGE;
+	net_dev->mtu = mtu;
+	return 0;
+}
+
+
+/**
+ * Callback function to handle events from UWB
+ * When we see other devices we know the carrier is ok,
+ * if we are the only device in the beacon group we set the carrier
+ * state to off.
+ * */
+void i1480u_uwb_notifs_cb(void *data, struct uwb_dev *uwb_dev,
+			  enum uwb_notifs event)
+{
+	struct i1480u *i1480u = data;
+	struct net_device *net_dev = i1480u->net_dev;
+	struct device *dev = &i1480u->usb_iface->dev;
+	switch (event) {
+	case UWB_NOTIF_BG_JOIN:
+		netif_carrier_on(net_dev);
+		dev_info(dev, "Link is up\n");
+		break;
+	case UWB_NOTIF_BG_LEAVE:
+		netif_carrier_off(net_dev);
+		dev_info(dev, "Link is down\n");
+		break;
+	default:
+		dev_err(dev, "don't know how to handle event %d from uwb\n",
+				event);
+	}
+}
+
+/**
+ * Stop the network queue
+ *
+ * Enable WLP substack to stop network queue. We also set the flow control
+ * threshold at this time to prevent the flow control from restarting the
+ * queue.
+ *
+ * we are loosing the current threshold value here ... FIXME?
+ */
+void i1480u_stop_queue(struct wlp *wlp)
+{
+	struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp);
+	struct net_device *net_dev = i1480u->net_dev;
+	i1480u->tx_inflight.threshold = 0;
+	netif_stop_queue(net_dev);
+}
+
+/**
+ * Start the network queue
+ *
+ * Enable WLP substack to start network queue. Also re-enable the flow
+ * control to manage the queue again.
+ *
+ * We re-enable the flow control by storing the default threshold in the
+ * flow control threshold. This means that if the user modified the
+ * threshold before the queue was stopped and restarted that information
+ * will be lost. FIXME?
+ */
+void i1480u_start_queue(struct wlp *wlp)
+{
+	struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp);
+	struct net_device *net_dev = i1480u->net_dev;
+	i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD;
+	netif_start_queue(net_dev);
+}
diff --git a/drivers/uwb/i1480/i1480u-wlp/rx.c b/drivers/uwb/i1480/i1480u-wlp/rx.c
new file mode 100644
index 0000000..9fc0353
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/rx.c
@@ -0,0 +1,486 @@
+/*
+ * WUSB Wire Adapter: WLP interface
+ * Driver for the Linux Network stack.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * i1480u's RX handling is simple. i1480u will send the received
+ * network packets broken up in fragments; 1 to N fragments make a
+ * packet, we assemble them together and deliver the packet with netif_rx().
+ *
+ * Beacuse each USB transfer is a *single* fragment (except when the
+ * transfer contains a first fragment), each URB called thus
+ * back contains one or two fragments. So we queue N URBs, each with its own
+ * fragment buffer. When a URB is done, we process it (adding to the
+ * current skb from the fragment buffer until complete). Once
+ * processed, we requeue the URB. There is always a bunch of URBs
+ * ready to take data, so the intergap should be minimal.
+ *
+ * An URB's transfer buffer is the data field of a socket buffer. This
+ * reduces copying as data can be passed directly to network layer. If a
+ * complete packet or 1st fragment is received the URB's transfer buffer is
+ * taken away from it and used to send data to the network layer. In this
+ * case a new transfer buffer is allocated to the URB before being requeued.
+ * If a "NEXT" or "LAST" fragment is received, the fragment contents is
+ * appended to the RX packet under construction and the transfer buffer
+ * is reused. To be able to use this buffer to assemble complete packets
+ * we set each buffer's size to that of the MAX ethernet packet that can
+ * be received. There is thus room for improvement in memory usage.
+ *
+ * When the max tx fragment size increases, we should be able to read
+ * data into the skbs directly with very simple code.
+ *
+ * ROADMAP:
+ *
+ *   ENTRY POINTS:
+ *
+ *     i1480u_rx_setup(): setup RX context [from i1480u_open()]
+ *
+ *     i1480u_rx_release(): release RX context [from i1480u_stop()]
+ *
+ *     i1480u_rx_cb(): called when the RX USB URB receives a
+ *                     packet. It removes the header and pushes it up
+ *                     the Linux netdev stack with netif_rx().
+ *
+ *       i1480u_rx_buffer()
+ *         i1480u_drop() and i1480u_fix()
+ *         i1480u_skb_deliver
+ *
+ */
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include "i1480u-wlp.h"
+
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+
+/**
+ * Setup the RX context
+ *
+ * Each URB is provided with a transfer_buffer that is the data field
+ * of a new socket buffer.
+ */
+int i1480u_rx_setup(struct i1480u *i1480u)
+{
+	int result, cnt;
+	struct device *dev = &i1480u->usb_iface->dev;
+	struct net_device *net_dev = i1480u->net_dev;
+	struct usb_endpoint_descriptor *epd;
+	struct sk_buff *skb;
+
+	/* Alloc RX stuff */
+	i1480u->rx_skb = NULL;	/* not in process of receiving packet */
+	result = -ENOMEM;
+	epd = &i1480u->usb_iface->cur_altsetting->endpoint[1].desc;
+	for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) {
+		struct i1480u_rx_buf *rx_buf = &i1480u->rx_buf[cnt];
+		rx_buf->i1480u = i1480u;
+		skb = dev_alloc_skb(i1480u_MAX_RX_PKT_SIZE);
+		if (!skb) {
+			dev_err(dev,
+				"RX: cannot allocate RX buffer %d\n", cnt);
+			result = -ENOMEM;
+			goto error;
+		}
+		skb->dev = net_dev;
+		skb->ip_summed = CHECKSUM_NONE;
+		skb_reserve(skb, 2);
+		rx_buf->data = skb;
+		rx_buf->urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (unlikely(rx_buf->urb == NULL)) {
+			dev_err(dev, "RX: cannot allocate URB %d\n", cnt);
+			result = -ENOMEM;
+			goto error;
+		}
+		usb_fill_bulk_urb(rx_buf->urb, i1480u->usb_dev,
+			  usb_rcvbulkpipe(i1480u->usb_dev, epd->bEndpointAddress),
+			  rx_buf->data->data, i1480u_MAX_RX_PKT_SIZE - 2,
+			  i1480u_rx_cb, rx_buf);
+		result = usb_submit_urb(rx_buf->urb, GFP_NOIO);
+		if (unlikely(result < 0)) {
+			dev_err(dev, "RX: cannot submit URB %d: %d\n",
+				cnt, result);
+			goto error;
+		}
+	}
+	return 0;
+
+error:
+	i1480u_rx_release(i1480u);
+	return result;
+}
+
+
+/** Release resources associated to the rx context */
+void i1480u_rx_release(struct i1480u *i1480u)
+{
+	int cnt;
+	for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) {
+		if (i1480u->rx_buf[cnt].data)
+			dev_kfree_skb(i1480u->rx_buf[cnt].data);
+		if (i1480u->rx_buf[cnt].urb) {
+			usb_kill_urb(i1480u->rx_buf[cnt].urb);
+			usb_free_urb(i1480u->rx_buf[cnt].urb);
+		}
+	}
+	if (i1480u->rx_skb != NULL)
+		dev_kfree_skb(i1480u->rx_skb);
+}
+
+static
+void i1480u_rx_unlink_urbs(struct i1480u *i1480u)
+{
+	int cnt;
+	for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) {
+		if (i1480u->rx_buf[cnt].urb)
+			usb_unlink_urb(i1480u->rx_buf[cnt].urb);
+	}
+}
+
+/** Fix an out-of-sequence packet */
+#define i1480u_fix(i1480u, msg...)			\
+do {							\
+	if (printk_ratelimit())				\
+		dev_err(&i1480u->usb_iface->dev, msg);	\
+	dev_kfree_skb_irq(i1480u->rx_skb);		\
+	i1480u->rx_skb = NULL;				\
+	i1480u->rx_untd_pkt_size = 0;			\
+} while (0)
+
+
+/** Drop an out-of-sequence packet */
+#define i1480u_drop(i1480u, msg...)			\
+do {							\
+	if (printk_ratelimit())				\
+		dev_err(&i1480u->usb_iface->dev, msg);	\
+	i1480u->stats.rx_dropped++;			\
+} while (0)
+
+
+
+
+/** Finalizes setting up the SKB and delivers it
+ *
+ * We first pass the incoming frame to WLP substack for verification. It
+ * may also be a WLP association frame in which case WLP will take over the
+ * processing. If WLP does not take it over it will still verify it, if the
+ * frame is invalid the skb will be freed by WLP and we will not continue
+ * parsing.
+ * */
+static
+void i1480u_skb_deliver(struct i1480u *i1480u)
+{
+	int should_parse;
+	struct net_device *net_dev = i1480u->net_dev;
+	struct device *dev = &i1480u->usb_iface->dev;
+
+	d_printf(6, dev, "RX delivered pre skb(%p), %u bytes\n",
+		 i1480u->rx_skb, i1480u->rx_skb->len);
+	d_dump(7, dev, i1480u->rx_skb->data, i1480u->rx_skb->len);
+	should_parse = wlp_receive_frame(dev, &i1480u->wlp, i1480u->rx_skb,
+					 &i1480u->rx_srcaddr);
+	if (!should_parse)
+		goto out;
+	i1480u->rx_skb->protocol = eth_type_trans(i1480u->rx_skb, net_dev);
+	d_printf(5, dev, "RX delivered skb(%p), %u bytes\n",
+		 i1480u->rx_skb, i1480u->rx_skb->len);
+	d_dump(7, dev, i1480u->rx_skb->data,
+	       i1480u->rx_skb->len > 72 ? 72 : i1480u->rx_skb->len);
+	i1480u->stats.rx_packets++;
+	i1480u->stats.rx_bytes += i1480u->rx_untd_pkt_size;
+	net_dev->last_rx = jiffies;
+	/* FIXME: flow control: check netif_rx() retval */
+
+	netif_rx(i1480u->rx_skb);		/* deliver */
+out:
+	i1480u->rx_skb = NULL;
+	i1480u->rx_untd_pkt_size = 0;
+}
+
+
+/**
+ * Process a buffer of data received from the USB RX endpoint
+ *
+ * First fragment arrives with next or last fragment. All other fragments
+ * arrive alone.
+ *
+ * /me hates long functions.
+ */
+static
+void i1480u_rx_buffer(struct i1480u_rx_buf *rx_buf)
+{
+	unsigned pkt_completed = 0;	/* !0 when we got all pkt fragments */
+	size_t untd_hdr_size, untd_frg_size;
+	size_t i1480u_hdr_size;
+	struct wlp_rx_hdr *i1480u_hdr = NULL;
+
+	struct i1480u *i1480u = rx_buf->i1480u;
+	struct sk_buff *skb = rx_buf->data;
+	int size_left = rx_buf->urb->actual_length;
+	void *ptr = rx_buf->urb->transfer_buffer; /* also rx_buf->data->data */
+	struct untd_hdr *untd_hdr;
+
+	struct net_device *net_dev = i1480u->net_dev;
+	struct device *dev = &i1480u->usb_iface->dev;
+	struct sk_buff *new_skb;
+
+#if 0
+	dev_fnstart(dev,
+		    "(i1480u %p ptr %p size_left %zu)\n", i1480u, ptr, size_left);
+	dev_err(dev, "RX packet, %zu bytes\n", size_left);
+	dump_bytes(dev, ptr, size_left);
+#endif
+	i1480u_hdr_size = sizeof(struct wlp_rx_hdr);
+
+	while (size_left > 0) {
+		if (pkt_completed) {
+			i1480u_drop(i1480u, "RX: fragment follows completed"
+					 "packet in same buffer. Dropping\n");
+			break;
+		}
+		untd_hdr = ptr;
+		if (size_left < sizeof(*untd_hdr)) {	/*  Check the UNTD header */
+			i1480u_drop(i1480u, "RX: short UNTD header! Dropping\n");
+			goto out;
+		}
+		if (unlikely(untd_hdr_rx_tx(untd_hdr) == 0)) {	/* Paranoia: TX set? */
+			i1480u_drop(i1480u, "RX: TX bit set! Dropping\n");
+			goto out;
+		}
+		switch (untd_hdr_type(untd_hdr)) {	/* Check the UNTD header type */
+		case i1480u_PKT_FRAG_1ST: {
+			struct untd_hdr_1st *untd_hdr_1st = (void *) untd_hdr;
+			dev_dbg(dev, "1st fragment\n");
+			untd_hdr_size = sizeof(struct untd_hdr_1st);
+			if (i1480u->rx_skb != NULL)
+				i1480u_fix(i1480u, "RX: 1st fragment out of "
+					"sequence! Fixing\n");
+			if (size_left < untd_hdr_size + i1480u_hdr_size) {
+				i1480u_drop(i1480u, "RX: short 1st fragment! "
+					"Dropping\n");
+				goto out;
+			}
+			i1480u->rx_untd_pkt_size = le16_to_cpu(untd_hdr->len)
+						 - i1480u_hdr_size;
+			untd_frg_size = le16_to_cpu(untd_hdr_1st->fragment_len);
+			if (size_left < untd_hdr_size + untd_frg_size) {
+				i1480u_drop(i1480u,
+					    "RX: short payload! Dropping\n");
+				goto out;
+			}
+			i1480u->rx_skb = skb;
+			i1480u_hdr = (void *) untd_hdr_1st + untd_hdr_size;
+			i1480u->rx_srcaddr = i1480u_hdr->srcaddr;
+			skb_put(i1480u->rx_skb, untd_hdr_size + untd_frg_size);
+			skb_pull(i1480u->rx_skb, untd_hdr_size + i1480u_hdr_size);
+			stats_add_sample(&i1480u->lqe_stats, (s8) i1480u_hdr->LQI - 7);
+			stats_add_sample(&i1480u->rssi_stats, i1480u_hdr->RSSI + 18);
+			rx_buf->data = NULL; /* need to create new buffer */
+			break;
+		}
+		case i1480u_PKT_FRAG_NXT: {
+			dev_dbg(dev, "nxt fragment\n");
+			untd_hdr_size = sizeof(struct untd_hdr_rst);
+			if (i1480u->rx_skb == NULL) {
+				i1480u_drop(i1480u, "RX: next fragment out of "
+					    "sequence! Dropping\n");
+				goto out;
+			}
+			if (size_left < untd_hdr_size) {
+				i1480u_drop(i1480u, "RX: short NXT fragment! "
+					    "Dropping\n");
+				goto out;
+			}
+			untd_frg_size = le16_to_cpu(untd_hdr->len);
+			if (size_left < untd_hdr_size + untd_frg_size) {
+				i1480u_drop(i1480u,
+					    "RX: short payload! Dropping\n");
+				goto out;
+			}
+			memmove(skb_put(i1480u->rx_skb, untd_frg_size),
+					ptr + untd_hdr_size, untd_frg_size);
+			break;
+		}
+		case i1480u_PKT_FRAG_LST: {
+			dev_dbg(dev, "Lst fragment\n");
+			untd_hdr_size = sizeof(struct untd_hdr_rst);
+			if (i1480u->rx_skb == NULL) {
+				i1480u_drop(i1480u, "RX: last fragment out of "
+					    "sequence! Dropping\n");
+				goto out;
+			}
+			if (size_left < untd_hdr_size) {
+				i1480u_drop(i1480u, "RX: short LST fragment! "
+					    "Dropping\n");
+				goto out;
+			}
+			untd_frg_size = le16_to_cpu(untd_hdr->len);
+			if (size_left < untd_frg_size + untd_hdr_size) {
+				i1480u_drop(i1480u,
+					    "RX: short payload! Dropping\n");
+				goto out;
+			}
+			memmove(skb_put(i1480u->rx_skb, untd_frg_size),
+					ptr + untd_hdr_size, untd_frg_size);
+			pkt_completed = 1;
+			break;
+		}
+		case i1480u_PKT_FRAG_CMP: {
+			dev_dbg(dev, "cmp fragment\n");
+			untd_hdr_size = sizeof(struct untd_hdr_cmp);
+			if (i1480u->rx_skb != NULL)
+				i1480u_fix(i1480u, "RX: fix out-of-sequence CMP"
+					   " fragment!\n");
+			if (size_left < untd_hdr_size + i1480u_hdr_size) {
+				i1480u_drop(i1480u, "RX: short CMP fragment! "
+					    "Dropping\n");
+				goto out;
+			}
+			i1480u->rx_untd_pkt_size = le16_to_cpu(untd_hdr->len);
+			untd_frg_size = i1480u->rx_untd_pkt_size;
+			if (size_left < i1480u->rx_untd_pkt_size + untd_hdr_size) {
+				i1480u_drop(i1480u,
+					    "RX: short payload! Dropping\n");
+				goto out;
+			}
+			i1480u->rx_skb = skb;
+			i1480u_hdr = (void *) untd_hdr + untd_hdr_size;
+			i1480u->rx_srcaddr = i1480u_hdr->srcaddr;
+			stats_add_sample(&i1480u->lqe_stats, (s8) i1480u_hdr->LQI - 7);
+			stats_add_sample(&i1480u->rssi_stats, i1480u_hdr->RSSI + 18);
+			skb_put(i1480u->rx_skb, untd_hdr_size + i1480u->rx_untd_pkt_size);
+			skb_pull(i1480u->rx_skb, untd_hdr_size + i1480u_hdr_size);
+			rx_buf->data = NULL;	/* for hand off skb to network stack */
+			pkt_completed = 1;
+			i1480u->rx_untd_pkt_size -= i1480u_hdr_size; /* accurate stat */
+			break;
+		}
+		default:
+			i1480u_drop(i1480u, "RX: unknown packet type %u! "
+				    "Dropping\n", untd_hdr_type(untd_hdr));
+			goto out;
+		}
+		size_left -= untd_hdr_size + untd_frg_size;
+		if (size_left > 0)
+			ptr += untd_hdr_size + untd_frg_size;
+	}
+	if (pkt_completed)
+		i1480u_skb_deliver(i1480u);
+out:
+	/* recreate needed RX buffers*/
+	if (rx_buf->data == NULL) {
+		/* buffer is being used to receive packet, create new */
+		new_skb = dev_alloc_skb(i1480u_MAX_RX_PKT_SIZE);
+		if (!new_skb) {
+			if (printk_ratelimit())
+				dev_err(dev,
+				"RX: cannot allocate RX buffer\n");
+		} else {
+			new_skb->dev = net_dev;
+			new_skb->ip_summed = CHECKSUM_NONE;
+			skb_reserve(new_skb, 2);
+			rx_buf->data = new_skb;
+		}
+	}
+	return;
+}
+
+
+/**
+ * Called when an RX URB has finished receiving or has found some kind
+ * of error condition.
+ *
+ * LIMITATIONS:
+ *
+ *  - We read USB-transfers, each transfer contains a SINGLE fragment
+ *    (can contain a complete packet, or a 1st, next, or last fragment
+ *    of a packet).
+ *    Looks like a transfer can contain more than one fragment (07/18/06)
+ *
+ *  - Each transfer buffer is the size of the maximum packet size (minus
+ *    headroom), i1480u_MAX_PKT_SIZE - 2
+ *
+ *  - We always read the full USB-transfer, no partials.
+ *
+ *  - Each transfer is read directly into a skb. This skb will be used to
+ *    send data to the upper layers if it is the first fragment or a complete
+ *    packet. In the other cases the data will be copied from the skb to
+ *    another skb that is being prepared for the upper layers from a prev
+ *    first fragment.
+ *
+ * It is simply too much of a pain. Gosh, there should be a unified
+ * SG infrastructure for *everything* [so that I could declare a SG
+ * buffer, pass it to USB for receiving, append some space to it if
+ * I wish, receive more until I have the whole chunk, adapt
+ * pointers on each fragment to remove hardware headers and then
+ * attach that to an skbuff and netif_rx()].
+ */
+void i1480u_rx_cb(struct urb *urb)
+{
+	int result;
+	int do_parse_buffer = 1;
+	struct i1480u_rx_buf *rx_buf = urb->context;
+	struct i1480u *i1480u = rx_buf->i1480u;
+	struct device *dev = &i1480u->usb_iface->dev;
+	unsigned long flags;
+	u8 rx_buf_idx = rx_buf - i1480u->rx_buf;
+
+	switch (urb->status) {
+	case 0:
+		break;
+	case -ECONNRESET:	/* Not an error, but a controlled situation; */
+	case -ENOENT:		/* (we killed the URB)...so, no broadcast */
+	case -ESHUTDOWN:	/* going away! */
+		dev_err(dev, "RX URB[%u]: goind down %d\n",
+			rx_buf_idx, urb->status);
+		goto error;
+	default:
+		dev_err(dev, "RX URB[%u]: unknown status %d\n",
+			rx_buf_idx, urb->status);
+		if (edc_inc(&i1480u->rx_errors, EDC_MAX_ERRORS,
+					EDC_ERROR_TIMEFRAME)) {
+			dev_err(dev, "RX: max acceptable errors exceeded,"
+					" resetting device.\n");
+			i1480u_rx_unlink_urbs(i1480u);
+			wlp_reset_all(&i1480u->wlp);
+			goto error;
+		}
+		do_parse_buffer = 0;
+		break;
+	}
+	spin_lock_irqsave(&i1480u->lock, flags);
+	/* chew the data fragments, extract network packets */
+	if (do_parse_buffer) {
+		i1480u_rx_buffer(rx_buf);
+		if (rx_buf->data) {
+			rx_buf->urb->transfer_buffer = rx_buf->data->data;
+			result = usb_submit_urb(rx_buf->urb, GFP_ATOMIC);
+			if (result < 0) {
+				dev_err(dev, "RX URB[%u]: cannot submit %d\n",
+					rx_buf_idx, result);
+			}
+		}
+	}
+	spin_unlock_irqrestore(&i1480u->lock, flags);
+error:
+	return;
+}
+
diff --git a/drivers/uwb/i1480/i1480u-wlp/sysfs.c b/drivers/uwb/i1480/i1480u-wlp/sysfs.c
new file mode 100644
index 0000000..a1d8ca6
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/sysfs.c
@@ -0,0 +1,408 @@
+/*
+ * WUSB Wire Adapter: WLP interface
+ * Sysfs interfaces
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/uwb/debug.h>
+#include <linux/device.h>
+#include "i1480u-wlp.h"
+
+
+/**
+ *
+ * @dev: Class device from the net_device; assumed refcnted.
+ *
+ * Yes, I don't lock--we assume it is refcounted and I am getting a
+ * single byte value that is kind of atomic to read.
+ */
+ssize_t uwb_phy_rate_show(const struct wlp_options *options, char *buf)
+{
+	return sprintf(buf, "%u\n",
+		       wlp_tx_hdr_phy_rate(&options->def_tx_hdr));
+}
+EXPORT_SYMBOL_GPL(uwb_phy_rate_show);
+
+
+ssize_t uwb_phy_rate_store(struct wlp_options *options,
+			   const char *buf, size_t size)
+{
+	ssize_t result;
+	unsigned rate;
+
+	result = sscanf(buf, "%u\n", &rate);
+	if (result != 1) {
+		result = -EINVAL;
+		goto out;
+	}
+	result = -EINVAL;
+	if (rate >= UWB_PHY_RATE_INVALID)
+		goto out;
+	wlp_tx_hdr_set_phy_rate(&options->def_tx_hdr, rate);
+	result = 0;
+out:
+	return result < 0 ? result : size;
+}
+EXPORT_SYMBOL_GPL(uwb_phy_rate_store);
+
+
+ssize_t uwb_rts_cts_show(const struct wlp_options *options, char *buf)
+{
+	return sprintf(buf, "%u\n",
+		       wlp_tx_hdr_rts_cts(&options->def_tx_hdr));
+}
+EXPORT_SYMBOL_GPL(uwb_rts_cts_show);
+
+
+ssize_t uwb_rts_cts_store(struct wlp_options *options,
+			  const char *buf, size_t size)
+{
+	ssize_t result;
+	unsigned value;
+
+	result = sscanf(buf, "%u\n", &value);
+	if (result != 1) {
+		result = -EINVAL;
+		goto out;
+	}
+	result = -EINVAL;
+	wlp_tx_hdr_set_rts_cts(&options->def_tx_hdr, !!value);
+	result = 0;
+out:
+	return result < 0 ? result : size;
+}
+EXPORT_SYMBOL_GPL(uwb_rts_cts_store);
+
+
+ssize_t uwb_ack_policy_show(const struct wlp_options *options, char *buf)
+{
+	return sprintf(buf, "%u\n",
+		       wlp_tx_hdr_ack_policy(&options->def_tx_hdr));
+}
+EXPORT_SYMBOL_GPL(uwb_ack_policy_show);
+
+
+ssize_t uwb_ack_policy_store(struct wlp_options *options,
+			     const char *buf, size_t size)
+{
+	ssize_t result;
+	unsigned value;
+
+	result = sscanf(buf, "%u\n", &value);
+	if (result != 1 || value > UWB_ACK_B_REQ) {
+		result = -EINVAL;
+		goto out;
+	}
+	wlp_tx_hdr_set_ack_policy(&options->def_tx_hdr, value);
+	result = 0;
+out:
+	return result < 0 ? result : size;
+}
+EXPORT_SYMBOL_GPL(uwb_ack_policy_store);
+
+
+/**
+ * Show the PCA base priority.
+ *
+ * We can access without locking, as the value is (for now) orthogonal
+ * to other values.
+ */
+ssize_t uwb_pca_base_priority_show(const struct wlp_options *options,
+				   char *buf)
+{
+	return sprintf(buf, "%u\n",
+		       options->pca_base_priority);
+}
+EXPORT_SYMBOL_GPL(uwb_pca_base_priority_show);
+
+
+/**
+ * Set the PCA base priority.
+ *
+ * We can access without locking, as the value is (for now) orthogonal
+ * to other values.
+ */
+ssize_t uwb_pca_base_priority_store(struct wlp_options *options,
+				    const char *buf, size_t size)
+{
+	ssize_t result = -EINVAL;
+	u8 pca_base_priority;
+
+	result = sscanf(buf, "%hhu\n", &pca_base_priority);
+	if (result != 1) {
+		result = -EINVAL;
+		goto out;
+	}
+	result = -EINVAL;
+	if (pca_base_priority >= 8)
+		goto out;
+	options->pca_base_priority = pca_base_priority;
+	/* Update TX header if we are currently using PCA. */
+	if (result >= 0 && (wlp_tx_hdr_delivery_id_type(&options->def_tx_hdr) & WLP_DRP) == 0)
+		wlp_tx_hdr_set_delivery_id_type(&options->def_tx_hdr, options->pca_base_priority);
+	result = 0;
+out:
+	return result < 0 ? result : size;
+}
+EXPORT_SYMBOL_GPL(uwb_pca_base_priority_store);
+
+/**
+ * Show current inflight values
+ *
+ * Will print the current MAX and THRESHOLD values for the basic flow
+ * control. In addition it will report how many times the TX queue needed
+ * to be restarted since the last time this query was made.
+ */
+static ssize_t wlp_tx_inflight_show(struct i1480u_tx_inflight *inflight,
+				    char *buf)
+{
+	ssize_t result;
+	unsigned long sec_elapsed = (jiffies - inflight->restart_ts)/HZ;
+	unsigned long restart_count = atomic_read(&inflight->restart_count);
+
+	result = scnprintf(buf, PAGE_SIZE, "%lu %lu %d %lu %lu %lu\n"
+			   "#read: threshold max inflight_count restarts "
+			   "seconds restarts/sec\n"
+			   "#write: threshold max\n",
+			   inflight->threshold, inflight->max,
+			   atomic_read(&inflight->count),
+			   restart_count, sec_elapsed,
+			   sec_elapsed == 0 ? 0 : restart_count/sec_elapsed);
+	inflight->restart_ts = jiffies;
+	atomic_set(&inflight->restart_count, 0);
+	return result;
+}
+
+static
+ssize_t wlp_tx_inflight_store(struct i1480u_tx_inflight *inflight,
+				const char *buf, size_t size)
+{
+	unsigned long in_threshold, in_max;
+	ssize_t result;
+	result = sscanf(buf, "%lu %lu", &in_threshold, &in_max);
+	if (result != 2)
+		return -EINVAL;
+	if (in_max <= in_threshold)
+		return -EINVAL;
+	inflight->max = in_max;
+	inflight->threshold = in_threshold;
+	return size;
+}
+/*
+ * Glue (or function adaptors) for accesing info on sysfs
+ *
+ * [we need this indirection because the PCI driver does almost the
+ * same]
+ *
+ * Linux 2.6.21 changed how 'struct netdevice' does attributes (from
+ * having a 'struct class_dev' to having a 'struct device'). That is
+ * quite of a pain.
+ *
+ * So we try to abstract that here. i1480u_SHOW() and i1480u_STORE()
+ * create adaptors for extracting the 'struct i1480u' from a 'struct
+ * dev' and calling a function for doing a sysfs operation (as we have
+ * them factorized already). i1480u_ATTR creates the attribute file
+ * (CLASS_DEVICE_ATTR or DEVICE_ATTR) and i1480u_ATTR_NAME produces a
+ * class_device_attr_NAME or device_attr_NAME (for group registration).
+ */
+#include <linux/version.h>
+
+#define i1480u_SHOW(name, fn, param)				\
+static ssize_t i1480u_show_##name(struct device *dev,		\
+				  struct device_attribute *attr,\
+				  char *buf)			\
+{								\
+	struct i1480u *i1480u = netdev_priv(to_net_dev(dev));	\
+	return fn(&i1480u->param, buf);				\
+}
+
+#define i1480u_STORE(name, fn, param)				\
+static ssize_t i1480u_store_##name(struct device *dev,		\
+				   struct device_attribute *attr,\
+				   const char *buf, size_t size)\
+{								\
+	struct i1480u *i1480u = netdev_priv(to_net_dev(dev));	\
+	return fn(&i1480u->param, buf, size);			\
+}
+
+#define i1480u_ATTR(name, perm) static DEVICE_ATTR(name, perm,  \
+					     i1480u_show_##name,\
+					     i1480u_store_##name)
+
+#define i1480u_ATTR_SHOW(name) static DEVICE_ATTR(name,		\
+					S_IRUGO,		\
+					i1480u_show_##name, NULL)
+
+#define i1480u_ATTR_NAME(a) (dev_attr_##a)
+
+
+/*
+ * Sysfs adaptors
+ */
+i1480u_SHOW(uwb_phy_rate, uwb_phy_rate_show, options);
+i1480u_STORE(uwb_phy_rate, uwb_phy_rate_store, options);
+i1480u_ATTR(uwb_phy_rate, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(uwb_rts_cts, uwb_rts_cts_show, options);
+i1480u_STORE(uwb_rts_cts, uwb_rts_cts_store, options);
+i1480u_ATTR(uwb_rts_cts, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(uwb_ack_policy, uwb_ack_policy_show, options);
+i1480u_STORE(uwb_ack_policy, uwb_ack_policy_store, options);
+i1480u_ATTR(uwb_ack_policy, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(uwb_pca_base_priority, uwb_pca_base_priority_show, options);
+i1480u_STORE(uwb_pca_base_priority, uwb_pca_base_priority_store, options);
+i1480u_ATTR(uwb_pca_base_priority, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_eda, wlp_eda_show, wlp);
+i1480u_STORE(wlp_eda, wlp_eda_store, wlp);
+i1480u_ATTR(wlp_eda, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_uuid, wlp_uuid_show, wlp);
+i1480u_STORE(wlp_uuid, wlp_uuid_store, wlp);
+i1480u_ATTR(wlp_uuid, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_name, wlp_dev_name_show, wlp);
+i1480u_STORE(wlp_dev_name, wlp_dev_name_store, wlp);
+i1480u_ATTR(wlp_dev_name, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_manufacturer, wlp_dev_manufacturer_show, wlp);
+i1480u_STORE(wlp_dev_manufacturer, wlp_dev_manufacturer_store, wlp);
+i1480u_ATTR(wlp_dev_manufacturer, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_model_name, wlp_dev_model_name_show, wlp);
+i1480u_STORE(wlp_dev_model_name, wlp_dev_model_name_store, wlp);
+i1480u_ATTR(wlp_dev_model_name, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_model_nr, wlp_dev_model_nr_show, wlp);
+i1480u_STORE(wlp_dev_model_nr, wlp_dev_model_nr_store, wlp);
+i1480u_ATTR(wlp_dev_model_nr, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_serial, wlp_dev_serial_show, wlp);
+i1480u_STORE(wlp_dev_serial, wlp_dev_serial_store, wlp);
+i1480u_ATTR(wlp_dev_serial, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_prim_category, wlp_dev_prim_category_show, wlp);
+i1480u_STORE(wlp_dev_prim_category, wlp_dev_prim_category_store, wlp);
+i1480u_ATTR(wlp_dev_prim_category, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_prim_OUI, wlp_dev_prim_OUI_show, wlp);
+i1480u_STORE(wlp_dev_prim_OUI, wlp_dev_prim_OUI_store, wlp);
+i1480u_ATTR(wlp_dev_prim_OUI, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_prim_OUI_sub, wlp_dev_prim_OUI_sub_show, wlp);
+i1480u_STORE(wlp_dev_prim_OUI_sub, wlp_dev_prim_OUI_sub_store, wlp);
+i1480u_ATTR(wlp_dev_prim_OUI_sub, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_prim_subcat, wlp_dev_prim_subcat_show, wlp);
+i1480u_STORE(wlp_dev_prim_subcat, wlp_dev_prim_subcat_store, wlp);
+i1480u_ATTR(wlp_dev_prim_subcat, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_neighborhood, wlp_neighborhood_show, wlp);
+i1480u_ATTR_SHOW(wlp_neighborhood);
+
+i1480u_SHOW(wss_activate, wlp_wss_activate_show, wlp.wss);
+i1480u_STORE(wss_activate, wlp_wss_activate_store, wlp.wss);
+i1480u_ATTR(wss_activate, S_IRUGO | S_IWUSR);
+
+/*
+ * Show the (min, max, avg) Line Quality Estimate (LQE, in dB) as over
+ * the last 256 received WLP frames (ECMA-368 13.3).
+ *
+ * [the -7dB that have to be substracted from the LQI to make the LQE
+ * are already taken into account].
+ */
+i1480u_SHOW(wlp_lqe, stats_show, lqe_stats);
+i1480u_STORE(wlp_lqe, stats_store, lqe_stats);
+i1480u_ATTR(wlp_lqe, S_IRUGO | S_IWUSR);
+
+/*
+ * Show the Receive Signal Strength Indicator averaged over all the
+ * received WLP frames (ECMA-368 13.3). Still is not clear what
+ * this value is, but is kind of a percentage of the signal strength
+ * at the antenna.
+ */
+i1480u_SHOW(wlp_rssi, stats_show, rssi_stats);
+i1480u_STORE(wlp_rssi, stats_store, rssi_stats);
+i1480u_ATTR(wlp_rssi, S_IRUGO | S_IWUSR);
+
+/**
+ * We maintain a basic flow control counter. "count" how many TX URBs are
+ * outstanding. Only allow "max"
+ * TX URBs to be outstanding. If this value is reached the queue will be
+ * stopped. The queue will be restarted when there are
+ * "threshold" URBs outstanding.
+ */
+i1480u_SHOW(wlp_tx_inflight, wlp_tx_inflight_show, tx_inflight);
+i1480u_STORE(wlp_tx_inflight, wlp_tx_inflight_store, tx_inflight);
+i1480u_ATTR(wlp_tx_inflight, S_IRUGO | S_IWUSR);
+
+static struct attribute *i1480u_attrs[] = {
+	&i1480u_ATTR_NAME(uwb_phy_rate).attr,
+	&i1480u_ATTR_NAME(uwb_rts_cts).attr,
+	&i1480u_ATTR_NAME(uwb_ack_policy).attr,
+	&i1480u_ATTR_NAME(uwb_pca_base_priority).attr,
+	&i1480u_ATTR_NAME(wlp_lqe).attr,
+	&i1480u_ATTR_NAME(wlp_rssi).attr,
+	&i1480u_ATTR_NAME(wlp_eda).attr,
+	&i1480u_ATTR_NAME(wlp_uuid).attr,
+	&i1480u_ATTR_NAME(wlp_dev_name).attr,
+	&i1480u_ATTR_NAME(wlp_dev_manufacturer).attr,
+	&i1480u_ATTR_NAME(wlp_dev_model_name).attr,
+	&i1480u_ATTR_NAME(wlp_dev_model_nr).attr,
+	&i1480u_ATTR_NAME(wlp_dev_serial).attr,
+	&i1480u_ATTR_NAME(wlp_dev_prim_category).attr,
+	&i1480u_ATTR_NAME(wlp_dev_prim_OUI).attr,
+	&i1480u_ATTR_NAME(wlp_dev_prim_OUI_sub).attr,
+	&i1480u_ATTR_NAME(wlp_dev_prim_subcat).attr,
+	&i1480u_ATTR_NAME(wlp_neighborhood).attr,
+	&i1480u_ATTR_NAME(wss_activate).attr,
+	&i1480u_ATTR_NAME(wlp_tx_inflight).attr,
+	NULL,
+};
+
+static struct attribute_group i1480u_attr_group = {
+	.name = NULL,	/* we want them in the same directory */
+	.attrs = i1480u_attrs,
+};
+
+int i1480u_sysfs_setup(struct i1480u *i1480u)
+{
+	int result;
+	struct device *dev = &i1480u->usb_iface->dev;
+	result = sysfs_create_group(&i1480u->net_dev->dev.kobj,
+				    &i1480u_attr_group);
+	if (result < 0)
+		dev_err(dev, "cannot initialize sysfs attributes: %d\n",
+			result);
+	return result;
+}
+
+
+void i1480u_sysfs_release(struct i1480u *i1480u)
+{
+	sysfs_remove_group(&i1480u->net_dev->dev.kobj,
+			   &i1480u_attr_group);
+}
diff --git a/drivers/uwb/i1480/i1480u-wlp/tx.c b/drivers/uwb/i1480/i1480u-wlp/tx.c
new file mode 100644
index 0000000..3426bfb
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/tx.c
@@ -0,0 +1,632 @@
+/*
+ * WUSB Wire Adapter: WLP interface
+ * Deal with TX (massaging data to transmit, handling it)
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Transmission engine. Get an skb, create from that a WLP transmit
+ * context, add a WLP TX header (which we keep prefilled in the
+ * device's instance), fill out the target-specific fields and
+ * fire it.
+ *
+ * ROADMAP:
+ *
+ *   Entry points:
+ *
+ *     i1480u_tx_release(): called by i1480u_disconnect() to release
+ *                          pending tx contexts.
+ *
+ *     i1480u_tx_cb(): callback for TX contexts (USB URBs)
+ *       i1480u_tx_destroy():
+ *
+ *     i1480u_tx_timeout(): called for timeout handling from the
+ *                          network stack.
+ *
+ *     i1480u_hard_start_xmit(): called for transmitting an skb from
+ *                               the network stack. Will interact with WLP
+ *                               substack to verify and prepare frame.
+ *       i1480u_xmit_frame(): actual transmission on hardware
+ *
+ *         i1480u_tx_create()	    Creates TX context
+ *            i1480u_tx_create_1()    For packets in 1 fragment
+ *            i1480u_tx_create_n()    For packets in >1 fragments
+ *
+ * TODO:
+ *
+ * - FIXME: rewrite using usb_sg_*(), add asynch support to
+ *          usb_sg_*(). It might not make too much sense as most of
+ *          the times the MTU will be smaller than one page...
+ */
+
+#include "i1480u-wlp.h"
+#define D_LOCAL 5
+#include <linux/uwb/debug.h>
+
+enum {
+	/* This is only for Next and Last TX packets */
+	i1480u_MAX_PL_SIZE = i1480u_MAX_FRG_SIZE
+		- sizeof(struct untd_hdr_rst),
+};
+
+/** Free resources allocated to a i1480u tx context. */
+static
+void i1480u_tx_free(struct i1480u_tx *wtx)
+{
+	kfree(wtx->buf);
+	if (wtx->skb)
+		dev_kfree_skb_irq(wtx->skb);
+	usb_free_urb(wtx->urb);
+	kfree(wtx);
+}
+
+static
+void i1480u_tx_destroy(struct i1480u *i1480u, struct i1480u_tx *wtx)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&i1480u->tx_list_lock, flags);	/* not active any more */
+	list_del(&wtx->list_node);
+	i1480u_tx_free(wtx);
+	spin_unlock_irqrestore(&i1480u->tx_list_lock, flags);
+}
+
+static
+void i1480u_tx_unlink_urbs(struct i1480u *i1480u)
+{
+	unsigned long flags;
+	struct i1480u_tx *wtx, *next;
+
+	spin_lock_irqsave(&i1480u->tx_list_lock, flags);
+	list_for_each_entry_safe(wtx, next, &i1480u->tx_list, list_node) {
+		usb_unlink_urb(wtx->urb);
+	}
+	spin_unlock_irqrestore(&i1480u->tx_list_lock, flags);
+}
+
+
+/**
+ * Callback for a completed tx USB URB.
+ *
+ * TODO:
+ *
+ * - FIXME: recover errors more gracefully
+ * - FIXME: handle NAKs (I dont think they come here) for flow ctl
+ */
+static
+void i1480u_tx_cb(struct urb *urb)
+{
+	struct i1480u_tx *wtx = urb->context;
+	struct i1480u *i1480u = wtx->i1480u;
+	struct net_device *net_dev = i1480u->net_dev;
+	struct device *dev = &i1480u->usb_iface->dev;
+	unsigned long flags;
+
+	switch (urb->status) {
+	case 0:
+		spin_lock_irqsave(&i1480u->lock, flags);
+		i1480u->stats.tx_packets++;
+		i1480u->stats.tx_bytes += urb->actual_length;
+		spin_unlock_irqrestore(&i1480u->lock, flags);
+		break;
+	case -ECONNRESET:	/* Not an error, but a controlled situation; */
+	case -ENOENT:		/* (we killed the URB)...so, no broadcast */
+		dev_dbg(dev, "notif endp: reset/noent %d\n", urb->status);
+		netif_stop_queue(net_dev);
+		break;
+	case -ESHUTDOWN:	/* going away! */
+		dev_dbg(dev, "notif endp: down %d\n", urb->status);
+		netif_stop_queue(net_dev);
+		break;
+	default:
+		dev_err(dev, "TX: unknown URB status %d\n", urb->status);
+		if (edc_inc(&i1480u->tx_errors, EDC_MAX_ERRORS,
+					EDC_ERROR_TIMEFRAME)) {
+			dev_err(dev, "TX: max acceptable errors exceeded."
+					"Reset device.\n");
+			netif_stop_queue(net_dev);
+			i1480u_tx_unlink_urbs(i1480u);
+			wlp_reset_all(&i1480u->wlp);
+		}
+		break;
+	}
+	i1480u_tx_destroy(i1480u, wtx);
+	if (atomic_dec_return(&i1480u->tx_inflight.count)
+	    <= i1480u->tx_inflight.threshold
+	    && netif_queue_stopped(net_dev)
+	    && i1480u->tx_inflight.threshold != 0) {
+		if (d_test(2) && printk_ratelimit())
+			d_printf(2, dev, "Restart queue. \n");
+		netif_start_queue(net_dev);
+		atomic_inc(&i1480u->tx_inflight.restart_count);
+	}
+	return;
+}
+
+
+/**
+ * Given a buffer that doesn't fit in a single fragment, create an
+ * scatter/gather structure for delivery to the USB pipe.
+ *
+ * Implements functionality of i1480u_tx_create().
+ *
+ * @wtx:	tx descriptor
+ * @skb:	skb to send
+ * @gfp_mask:	gfp allocation mask
+ * @returns:    Pointer to @wtx if ok, NULL on error.
+ *
+ * Sorry, TOO LONG a function, but breaking it up is kind of hard
+ *
+ * This will break the buffer in chunks smaller than
+ * i1480u_MAX_FRG_SIZE (including the header) and add proper headers
+ * to each:
+ *
+ *   1st header           \
+ *   i1480 tx header      |  fragment 1
+ *   fragment data        /
+ *   nxt header           \  fragment 2
+ *   fragment data        /
+ *   ..
+ *   ..
+ *   last header          \  fragment 3
+ *   last fragment data   /
+ *
+ * This does not fill the i1480 TX header, it is left up to the
+ * caller to do that; you can get it from @wtx->wlp_tx_hdr.
+ *
+ * This function consumes the skb unless there is an error.
+ */
+static
+int i1480u_tx_create_n(struct i1480u_tx *wtx, struct sk_buff *skb,
+		       gfp_t gfp_mask)
+{
+	int result;
+	void *pl;
+	size_t pl_size;
+
+	void *pl_itr, *buf_itr;
+	size_t pl_size_left, frgs, pl_size_1st, frg_pl_size = 0;
+	struct untd_hdr_1st *untd_hdr_1st;
+	struct wlp_tx_hdr *wlp_tx_hdr;
+	struct untd_hdr_rst *untd_hdr_rst;
+
+	wtx->skb = NULL;
+	pl = skb->data;
+	pl_itr = pl;
+	pl_size = skb->len;
+	pl_size_left = pl_size;	/* payload size */
+	/* First fragment; fits as much as i1480u_MAX_FRG_SIZE minus
+	 * the headers */
+	pl_size_1st = i1480u_MAX_FRG_SIZE
+		- sizeof(struct untd_hdr_1st) - sizeof(struct wlp_tx_hdr);
+	BUG_ON(pl_size_1st > pl_size);
+	pl_size_left -= pl_size_1st;
+	/* The rest have an smaller header (no i1480 TX header). We
+	 * need to break up the payload in blocks smaller than
+	 * i1480u_MAX_PL_SIZE (payload excluding header). */
+	frgs = (pl_size_left + i1480u_MAX_PL_SIZE - 1) / i1480u_MAX_PL_SIZE;
+	/* Allocate space for the new buffer. In this new buffer we'll
+	 * place the headers followed by the data fragment, headers,
+	 * data fragments, etc..
+	 */
+	result = -ENOMEM;
+	wtx->buf_size = sizeof(*untd_hdr_1st)
+		+ sizeof(*wlp_tx_hdr)
+		+ frgs * sizeof(*untd_hdr_rst)
+		+ pl_size;
+	wtx->buf = kmalloc(wtx->buf_size, gfp_mask);
+	if (wtx->buf == NULL)
+		goto error_buf_alloc;
+
+	buf_itr = wtx->buf;		/* We got the space, let's fill it up */
+	/* Fill 1st fragment */
+	untd_hdr_1st = buf_itr;
+	buf_itr += sizeof(*untd_hdr_1st);
+	untd_hdr_set_type(&untd_hdr_1st->hdr, i1480u_PKT_FRAG_1ST);
+	untd_hdr_set_rx_tx(&untd_hdr_1st->hdr, 0);
+	untd_hdr_1st->hdr.len = cpu_to_le16(pl_size + sizeof(*wlp_tx_hdr));
+	untd_hdr_1st->fragment_len =
+		cpu_to_le16(pl_size_1st + sizeof(*wlp_tx_hdr));
+	memset(untd_hdr_1st->padding, 0, sizeof(untd_hdr_1st->padding));
+	/* Set up i1480 header info */
+	wlp_tx_hdr = wtx->wlp_tx_hdr = buf_itr;
+	buf_itr += sizeof(*wlp_tx_hdr);
+	/* Copy the first fragment */
+	memcpy(buf_itr, pl_itr, pl_size_1st);
+	pl_itr += pl_size_1st;
+	buf_itr += pl_size_1st;
+
+	/* Now do each remaining fragment */
+	result = -EINVAL;
+	while (pl_size_left > 0) {
+		d_printf(5, NULL, "ITR HDR: pl_size_left %zu buf_itr %zu\n",
+			 pl_size_left, buf_itr - wtx->buf);
+		if (buf_itr + sizeof(*untd_hdr_rst) - wtx->buf
+		    > wtx->buf_size) {
+			printk(KERN_ERR "BUG: no space for header\n");
+			goto error_bug;
+		}
+		d_printf(5, NULL, "ITR HDR 2: pl_size_left %zu buf_itr %zu\n",
+			 pl_size_left, buf_itr - wtx->buf);
+		untd_hdr_rst = buf_itr;
+		buf_itr += sizeof(*untd_hdr_rst);
+		if (pl_size_left > i1480u_MAX_PL_SIZE) {
+			frg_pl_size = i1480u_MAX_PL_SIZE;
+			untd_hdr_set_type(&untd_hdr_rst->hdr, i1480u_PKT_FRAG_NXT);
+		} else {
+			frg_pl_size = pl_size_left;
+			untd_hdr_set_type(&untd_hdr_rst->hdr, i1480u_PKT_FRAG_LST);
+		}
+		d_printf(5, NULL,
+			 "ITR PL: pl_size_left %zu buf_itr %zu frg_pl_size %zu\n",
+			 pl_size_left, buf_itr - wtx->buf, frg_pl_size);
+		untd_hdr_set_rx_tx(&untd_hdr_rst->hdr, 0);
+		untd_hdr_rst->hdr.len = cpu_to_le16(frg_pl_size);
+		untd_hdr_rst->padding = 0;
+		if (buf_itr + frg_pl_size - wtx->buf
+		    > wtx->buf_size) {
+			printk(KERN_ERR "BUG: no space for payload\n");
+			goto error_bug;
+		}
+		memcpy(buf_itr, pl_itr, frg_pl_size);
+		buf_itr += frg_pl_size;
+		pl_itr += frg_pl_size;
+		pl_size_left -= frg_pl_size;
+		d_printf(5, NULL,
+			 "ITR PL 2: pl_size_left %zu buf_itr %zu frg_pl_size %zu\n",
+			 pl_size_left, buf_itr - wtx->buf, frg_pl_size);
+	}
+	dev_kfree_skb_irq(skb);
+	return 0;
+
+error_bug:
+	printk(KERN_ERR
+	       "BUG: skb %u bytes\n"
+	       "BUG: frg_pl_size %zd i1480u_MAX_FRG_SIZE %u\n"
+	       "BUG: buf_itr %zu buf_size %zu pl_size_left %zu\n",
+	       skb->len,
+	       frg_pl_size, i1480u_MAX_FRG_SIZE,
+	       buf_itr - wtx->buf, wtx->buf_size, pl_size_left);
+
+	kfree(wtx->buf);
+error_buf_alloc:
+	return result;
+}
+
+
+/**
+ * Given a buffer that fits in a single fragment, fill out a @wtx
+ * struct for transmitting it down the USB pipe.
+ *
+ * Uses the fact that we have space reserved in front of the skbuff
+ * for hardware headers :]
+ *
+ * This does not fill the i1480 TX header, it is left up to the
+ * caller to do that; you can get it from @wtx->wlp_tx_hdr.
+ *
+ * @pl:		pointer to payload data
+ * @pl_size:    size of the payuload
+ *
+ * This function does not consume the @skb.
+ */
+static
+int i1480u_tx_create_1(struct i1480u_tx *wtx, struct sk_buff *skb,
+		       gfp_t gfp_mask)
+{
+	struct untd_hdr_cmp *untd_hdr_cmp;
+	struct wlp_tx_hdr *wlp_tx_hdr;
+
+	wtx->buf = NULL;
+	wtx->skb = skb;
+	BUG_ON(skb_headroom(skb) < sizeof(*wlp_tx_hdr));
+	wlp_tx_hdr = (void *) __skb_push(skb, sizeof(*wlp_tx_hdr));
+	wtx->wlp_tx_hdr = wlp_tx_hdr;
+	BUG_ON(skb_headroom(skb) < sizeof(*untd_hdr_cmp));
+	untd_hdr_cmp = (void *) __skb_push(skb, sizeof(*untd_hdr_cmp));
+
+	untd_hdr_set_type(&untd_hdr_cmp->hdr, i1480u_PKT_FRAG_CMP);
+	untd_hdr_set_rx_tx(&untd_hdr_cmp->hdr, 0);
+	untd_hdr_cmp->hdr.len = cpu_to_le16(skb->len - sizeof(*untd_hdr_cmp));
+	untd_hdr_cmp->padding = 0;
+	return 0;
+}
+
+
+/**
+ * Given a skb to transmit, massage it to become palatable for the TX pipe
+ *
+ * This will break the buffer in chunks smaller than
+ * i1480u_MAX_FRG_SIZE and add proper headers to each.
+ *
+ *   1st header           \
+ *   i1480 tx header      |  fragment 1
+ *   fragment data        /
+ *   nxt header           \  fragment 2
+ *   fragment data        /
+ *   ..
+ *   ..
+ *   last header          \  fragment 3
+ *   last fragment data   /
+ *
+ * Each fragment will be always smaller or equal to i1480u_MAX_FRG_SIZE.
+ *
+ * If the first fragment is smaller than i1480u_MAX_FRG_SIZE, then the
+ * following is composed:
+ *
+ *   complete header      \
+ *   i1480 tx header      | single fragment
+ *   packet data          /
+ *
+ * We were going to use s/g support, but because the interface is
+ * synch and at the end there is plenty of overhead to do it, it
+ * didn't seem that worth for data that is going to be smaller than
+ * one page.
+ */
+static
+struct i1480u_tx *i1480u_tx_create(struct i1480u *i1480u,
+				   struct sk_buff *skb, gfp_t gfp_mask)
+{
+	int result;
+	struct usb_endpoint_descriptor *epd;
+	int usb_pipe;
+	unsigned long flags;
+
+	struct i1480u_tx *wtx;
+	const size_t pl_max_size =
+		i1480u_MAX_FRG_SIZE - sizeof(struct untd_hdr_cmp)
+		- sizeof(struct wlp_tx_hdr);
+
+	wtx = kmalloc(sizeof(*wtx), gfp_mask);
+	if (wtx == NULL)
+		goto error_wtx_alloc;
+	wtx->urb = usb_alloc_urb(0, gfp_mask);
+	if (wtx->urb == NULL)
+		goto error_urb_alloc;
+	epd = &i1480u->usb_iface->cur_altsetting->endpoint[2].desc;
+	usb_pipe = usb_sndbulkpipe(i1480u->usb_dev, epd->bEndpointAddress);
+	/* Fits in a single complete packet or need to split? */
+	if (skb->len > pl_max_size) {
+		result = i1480u_tx_create_n(wtx, skb, gfp_mask);
+		if (result < 0)
+			goto error_create;
+		usb_fill_bulk_urb(wtx->urb, i1480u->usb_dev, usb_pipe,
+				  wtx->buf, wtx->buf_size, i1480u_tx_cb, wtx);
+	} else {
+		result = i1480u_tx_create_1(wtx, skb, gfp_mask);
+		if (result < 0)
+			goto error_create;
+		usb_fill_bulk_urb(wtx->urb, i1480u->usb_dev, usb_pipe,
+				  skb->data, skb->len, i1480u_tx_cb, wtx);
+	}
+	spin_lock_irqsave(&i1480u->tx_list_lock, flags);
+	list_add(&wtx->list_node, &i1480u->tx_list);
+	spin_unlock_irqrestore(&i1480u->tx_list_lock, flags);
+	return wtx;
+
+error_create:
+	kfree(wtx->urb);
+error_urb_alloc:
+	kfree(wtx);
+error_wtx_alloc:
+	return NULL;
+}
+
+/**
+ * Actual fragmentation and transmission of frame
+ *
+ * @wlp:  WLP substack data structure
+ * @skb:  To be transmitted
+ * @dst:  Device address of destination
+ * @returns: 0 on success, <0 on failure
+ *
+ * This function can also be called directly (not just from
+ * hard_start_xmit), so we also check here if the interface is up before
+ * taking sending anything.
+ */
+int i1480u_xmit_frame(struct wlp *wlp, struct sk_buff *skb,
+		      struct uwb_dev_addr *dst)
+{
+	int result = -ENXIO;
+	struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp);
+	struct device *dev = &i1480u->usb_iface->dev;
+	struct net_device *net_dev = i1480u->net_dev;
+	struct i1480u_tx *wtx;
+	struct wlp_tx_hdr *wlp_tx_hdr;
+	static unsigned char dev_bcast[2] = { 0xff, 0xff };
+#if 0
+	int lockup = 50;
+#endif
+
+	d_fnstart(6, dev, "(skb %p (%u), net_dev %p)\n", skb, skb->len,
+		  net_dev);
+	BUG_ON(i1480u->wlp.rc == NULL);
+	if ((net_dev->flags & IFF_UP) == 0)
+		goto out;
+	result = -EBUSY;
+	if (atomic_read(&i1480u->tx_inflight.count) >= i1480u->tx_inflight.max) {
+		if (d_test(2) && printk_ratelimit())
+			d_printf(2, dev, "Max frames in flight "
+				 "stopping queue.\n");
+		netif_stop_queue(net_dev);
+		goto error_max_inflight;
+	}
+	result = -ENOMEM;
+	wtx = i1480u_tx_create(i1480u, skb, GFP_ATOMIC);
+	if (unlikely(wtx == NULL)) {
+		if (printk_ratelimit())
+			dev_err(dev, "TX: no memory for WLP TX URB,"
+				"dropping packet (in flight %d)\n",
+				atomic_read(&i1480u->tx_inflight.count));
+		netif_stop_queue(net_dev);
+		goto error_wtx_alloc;
+	}
+	wtx->i1480u = i1480u;
+	/* Fill out the i1480 header; @i1480u->def_tx_hdr read without
+	 * locking. We do so because they are kind of orthogonal to
+	 * each other (and thus not changed in an atomic batch).
+	 * The ETH header is right after the WLP TX header. */
+	wlp_tx_hdr = wtx->wlp_tx_hdr;
+	*wlp_tx_hdr = i1480u->options.def_tx_hdr;
+	wlp_tx_hdr->dstaddr = *dst;
+	if (!memcmp(&wlp_tx_hdr->dstaddr, dev_bcast, sizeof(dev_bcast))
+	    && (wlp_tx_hdr_delivery_id_type(wlp_tx_hdr) & WLP_DRP)) {
+		/*Broadcast message directed to DRP host. Send as best effort
+		 * on PCA. */
+		wlp_tx_hdr_set_delivery_id_type(wlp_tx_hdr, i1480u->options.pca_base_priority);
+	}
+
+#if 0
+	dev_info(dev, "TX delivering skb -> USB, %zu bytes\n", skb->len);
+	dump_bytes(dev, skb->data, skb->len > 72 ? 72 : skb->len);
+#endif
+#if 0
+	/* simulates a device lockup after every lockup# packets */
+	if (lockup && ((i1480u->stats.tx_packets + 1) % lockup) == 0) {
+		/* Simulate a dropped transmit interrupt */
+		net_dev->trans_start = jiffies;
+		netif_stop_queue(net_dev);
+		dev_err(dev, "Simulate lockup at %ld\n", jiffies);
+		return result;
+	}
+#endif
+
+	result = usb_submit_urb(wtx->urb, GFP_ATOMIC);		/* Go baby */
+	if (result < 0) {
+		dev_err(dev, "TX: cannot submit URB: %d\n", result);
+		/* We leave the freeing of skb to calling function */
+		wtx->skb = NULL;
+		goto error_tx_urb_submit;
+	}
+	atomic_inc(&i1480u->tx_inflight.count);
+	net_dev->trans_start = jiffies;
+	d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len,
+		net_dev, result);
+	return result;
+
+error_tx_urb_submit:
+	i1480u_tx_destroy(i1480u, wtx);
+error_wtx_alloc:
+error_max_inflight:
+out:
+	d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len,
+		net_dev, result);
+	return result;
+}
+
+
+/**
+ * Transmit an skb  Called when an skbuf has to be transmitted
+ *
+ * The skb is first passed to WLP substack to ensure this is a valid
+ * frame. If valid the device address of destination will be filled and
+ * the WLP header prepended to the skb. If this step fails we fake sending
+ * the frame, if we return an error the network stack will just keep trying.
+ *
+ * Broadcast frames inside a WSS needs to be treated special as multicast is
+ * not supported. A broadcast frame is sent as unicast to each member of the
+ * WSS - this is done by the WLP substack when it finds a broadcast frame.
+ * So, we test if the WLP substack took over the skb and only transmit it
+ * if it has not (been taken over).
+ *
+ * @net_dev->xmit_lock is held
+ */
+int i1480u_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
+{
+	int result;
+	struct i1480u *i1480u = netdev_priv(net_dev);
+	struct device *dev = &i1480u->usb_iface->dev;
+	struct uwb_dev_addr dst;
+
+	d_fnstart(6, dev, "(skb %p (%u), net_dev %p)\n", skb, skb->len,
+		  net_dev);
+	BUG_ON(i1480u->wlp.rc == NULL);
+	if ((net_dev->flags & IFF_UP) == 0)
+		goto error;
+	result = wlp_prepare_tx_frame(dev, &i1480u->wlp, skb, &dst);
+	if (result < 0) {
+		dev_err(dev, "WLP verification of TX frame failed (%d). "
+			"Dropping packet.\n", result);
+		goto error;
+	} else if (result == 1) {
+		d_printf(6, dev, "WLP will transmit frame. \n");
+		/* trans_start time will be set when WLP actually transmits
+		 * the frame */
+		goto out;
+	}
+	d_printf(6, dev, "Transmitting frame. \n");
+	result = i1480u_xmit_frame(&i1480u->wlp, skb, &dst);
+	if (result < 0) {
+		dev_err(dev, "Frame TX failed (%d).\n", result);
+		goto error;
+	}
+	d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len,
+		net_dev, result);
+	return NETDEV_TX_OK;
+error:
+	dev_kfree_skb_any(skb);
+	i1480u->stats.tx_dropped++;
+out:
+	d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len,
+		net_dev, result);
+	return NETDEV_TX_OK;
+}
+
+
+/**
+ * Called when a pkt transmission doesn't complete in a reasonable period
+ * Device reset may sleep - do it outside of interrupt context (delayed)
+ */
+void i1480u_tx_timeout(struct net_device *net_dev)
+{
+	struct i1480u *i1480u = netdev_priv(net_dev);
+
+	wlp_reset_all(&i1480u->wlp);
+}
+
+
+void i1480u_tx_release(struct i1480u *i1480u)
+{
+	unsigned long flags;
+	struct i1480u_tx *wtx, *next;
+	int count = 0, empty;
+
+	spin_lock_irqsave(&i1480u->tx_list_lock, flags);
+	list_for_each_entry_safe(wtx, next, &i1480u->tx_list, list_node) {
+		count++;
+		usb_unlink_urb(wtx->urb);
+	}
+	spin_unlock_irqrestore(&i1480u->tx_list_lock, flags);
+	count = count*10; /* i1480ut 200ms per unlinked urb (intervals of 20ms) */
+	/*
+	 * We don't like this sollution too much (dirty as it is), but
+	 * it is cheaper than putting a refcount on each i1480u_tx and
+	 * i1480uting for all of them to go away...
+	 *
+	 * Called when no more packets can be added to tx_list
+	 * so can i1480ut for it to be empty.
+	 */
+	while (1) {
+		spin_lock_irqsave(&i1480u->tx_list_lock, flags);
+		empty = list_empty(&i1480u->tx_list);
+		spin_unlock_irqrestore(&i1480u->tx_list_lock, flags);
+		if (empty)
+			break;
+		count--;
+		BUG_ON(count == 0);
+		msleep(20);
+	}
+}
diff --git a/drivers/uwb/ie.c b/drivers/uwb/ie.c
new file mode 100644
index 0000000..cf6f3d1
--- /dev/null
+++ b/drivers/uwb/ie.c
@@ -0,0 +1,541 @@
+/*
+ * Ultra Wide Band
+ * Information Element Handling
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ * Reinette Chatre <reinette.chatre@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#include "uwb-internal.h"
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+/**
+ * uwb_ie_next - get the next IE in a buffer
+ * @ptr: start of the buffer containing the IE data
+ * @len: length of the buffer
+ *
+ * Both @ptr and @len are updated so subsequent calls to uwb_ie_next()
+ * will get the next IE.
+ *
+ * NULL is returned (and @ptr and @len will not be updated) if there
+ * are no more IEs in the buffer or the buffer is too short.
+ */
+struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len)
+{
+	struct uwb_ie_hdr *hdr;
+	size_t ie_len;
+
+	if (*len < sizeof(struct uwb_ie_hdr))
+		return NULL;
+
+	hdr = *ptr;
+	ie_len = sizeof(struct uwb_ie_hdr) + hdr->length;
+
+	if (*len < ie_len)
+		return NULL;
+
+	*ptr += ie_len;
+	*len -= ie_len;
+
+	return hdr;
+}
+EXPORT_SYMBOL_GPL(uwb_ie_next);
+
+/**
+ * Get the IEs that a radio controller is sending in its beacon
+ *
+ * @uwb_rc:  UWB Radio Controller
+ * @returns: Size read from the system
+ *
+ * We don't need to lock the uwb_rc's mutex because we don't modify
+ * anything. Once done with the iedata buffer, call
+ * uwb_rc_ie_release(iedata). Don't call kfree on it.
+ */
+ssize_t uwb_rc_get_ie(struct uwb_rc *uwb_rc, struct uwb_rc_evt_get_ie **pget_ie)
+{
+	ssize_t result;
+	struct device *dev = &uwb_rc->uwb_dev.dev;
+	struct uwb_rccb *cmd = NULL;
+	struct uwb_rceb *reply = NULL;
+	struct uwb_rc_evt_get_ie *get_ie;
+
+	d_fnstart(3, dev, "(%p, %p)\n", uwb_rc, pget_ie);
+	result = -ENOMEM;
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		goto error_kzalloc;
+	cmd->bCommandType = UWB_RC_CET_GENERAL;
+	cmd->wCommand = cpu_to_le16(UWB_RC_CMD_GET_IE);
+	result = uwb_rc_vcmd(uwb_rc, "GET_IE", cmd, sizeof(*cmd),
+			     UWB_RC_CET_GENERAL, UWB_RC_CMD_GET_IE,
+			     &reply);
+	if (result < 0)
+		goto error_cmd;
+	get_ie = container_of(reply, struct uwb_rc_evt_get_ie, rceb);
+	if (result < sizeof(*get_ie)) {
+		dev_err(dev, "not enough data returned for decoding GET IE "
+			"(%zu bytes received vs %zu needed)\n",
+			result, sizeof(*get_ie));
+		result = -EINVAL;
+	} else if (result < sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength)) {
+		dev_err(dev, "not enough data returned for decoding GET IE "
+			"payload (%zu bytes received vs %zu needed)\n", result,
+			sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength));
+		result = -EINVAL;
+	} else
+		*pget_ie = get_ie;
+error_cmd:
+	kfree(cmd);
+error_kzalloc:
+	d_fnend(3, dev, "(%p, %p) = %d\n", uwb_rc, pget_ie, (int)result);
+	return result;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_get_ie);
+
+
+/*
+ * Given a pointer to an IE, print it in ASCII/hex followed by a new line
+ *
+ * @ie_hdr: pointer to the IE header. Length is in there, and it is
+ *          guaranteed that the ie_hdr->length bytes following it are
+ *          safely accesible.
+ *
+ * @_data: context data passed from uwb_ie_for_each(), an struct output_ctx
+ */
+int uwb_ie_dump_hex(struct uwb_dev *uwb_dev, const struct uwb_ie_hdr *ie_hdr,
+		    size_t offset, void *_ctx)
+{
+	struct uwb_buf_ctx *ctx = _ctx;
+	const u8 *pl = (void *)(ie_hdr + 1);
+	u8 pl_itr;
+
+	ctx->bytes += scnprintf(ctx->buf + ctx->bytes, ctx->size - ctx->bytes,
+				"%02x %02x ", (unsigned) ie_hdr->element_id,
+				(unsigned) ie_hdr->length);
+	pl_itr = 0;
+	while (pl_itr < ie_hdr->length && ctx->bytes < ctx->size)
+		ctx->bytes += scnprintf(ctx->buf + ctx->bytes,
+					ctx->size - ctx->bytes,
+					"%02x ", (unsigned) pl[pl_itr++]);
+	if (ctx->bytes < ctx->size)
+		ctx->buf[ctx->bytes++] = '\n';
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uwb_ie_dump_hex);
+
+
+/**
+ * Verify that a pointer in a buffer points to valid IE
+ *
+ * @start: pointer to start of buffer in which IE appears
+ * @itr:   pointer to IE inside buffer that will be verified
+ * @top:   pointer to end of buffer
+ *
+ * @returns: 0 if IE is valid, <0 otherwise
+ *
+ * Verification involves checking that the buffer can contain a
+ * header and the amount of data reported in the IE header can be found in
+ * the buffer.
+ */
+static
+int uwb_rc_ie_verify(struct uwb_dev *uwb_dev, const void *start,
+		     const void *itr, const void *top)
+{
+	struct device *dev = &uwb_dev->dev;
+	const struct uwb_ie_hdr *ie_hdr;
+
+	if (top - itr < sizeof(*ie_hdr)) {
+		dev_err(dev, "Bad IE: no data to decode header "
+			"(%zu bytes left vs %zu needed) at offset %zu\n",
+			top - itr, sizeof(*ie_hdr), itr - start);
+		return -EINVAL;
+	}
+	ie_hdr = itr;
+	itr += sizeof(*ie_hdr);
+	if (top - itr < ie_hdr->length) {
+		dev_err(dev, "Bad IE: not enough data for payload "
+			"(%zu bytes left vs %zu needed) at offset %zu\n",
+			top - itr, (size_t)ie_hdr->length,
+			(void *)ie_hdr - start);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+
+/**
+ * Walk a buffer filled with consecutive IE's a buffer
+ *
+ * @uwb_dev: UWB device this IEs belong to (for err messages mainly)
+ *
+ * @fn: function to call with each IE; if it returns 0, we keep
+ *      traversing the buffer. If it returns !0, we'll stop and return
+ *      that value.
+ *
+ * @data: pointer passed to @fn
+ *
+ * @buf: buffer where the consecutive IEs are located
+ *
+ * @size: size of @buf
+ *
+ * Each IE is checked for basic correctness (there is space left for
+ * the header and the payload). If that test is failed, we stop
+ * processing. For every good IE, @fn is called.
+ */
+ssize_t uwb_ie_for_each(struct uwb_dev *uwb_dev, uwb_ie_f fn, void *data,
+			const void *buf, size_t size)
+{
+	ssize_t result = 0;
+	const struct uwb_ie_hdr *ie_hdr;
+	const void *itr = buf, *top = itr + size;
+
+	while (itr < top) {
+		if (uwb_rc_ie_verify(uwb_dev, buf, itr, top) != 0)
+			break;
+		ie_hdr = itr;
+		itr += sizeof(*ie_hdr) + ie_hdr->length;
+		result = fn(uwb_dev, ie_hdr, itr - buf, data);
+		if (result != 0)
+			break;
+	}
+	return result;
+}
+EXPORT_SYMBOL_GPL(uwb_ie_for_each);
+
+
+/**
+ * Replace all IEs currently being transmitted by a device
+ *
+ * @cmd:    pointer to the SET-IE command with the IEs to set
+ * @size:   size of @buf
+ */
+int uwb_rc_set_ie(struct uwb_rc *rc, struct uwb_rc_cmd_set_ie *cmd)
+{
+	int result;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_rc_evt_set_ie reply;
+
+	reply.rceb.bEventType = UWB_RC_CET_GENERAL;
+	reply.rceb.wEvent = UWB_RC_CMD_SET_IE;
+	result = uwb_rc_cmd(rc, "SET-IE", &cmd->rccb,
+			    sizeof(*cmd) + le16_to_cpu(cmd->wIELength),
+			    &reply.rceb, sizeof(reply));
+	if (result < 0)
+		goto error_cmd;
+	else if (result != sizeof(reply)) {
+		dev_err(dev, "SET-IE: not enough data to decode reply "
+			"(%d bytes received vs %zu needed)\n",
+			result, sizeof(reply));
+		result = -EIO;
+	} else if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(dev, "SET-IE: command execution failed: %s (%d)\n",
+			uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
+		result = -EIO;
+	} else
+		result = 0;
+error_cmd:
+	return result;
+}
+
+/**
+ * Determine by IE id if IE is host settable
+ * WUSB 1.0 [8.6.2.8 Table 8.85]
+ *
+ * EXCEPTION:
+ * All but UWB_IE_WLP appears in Table 8.85 from WUSB 1.0. Setting this IE
+ * is required for the WLP substack to perform association with its WSS so
+ * we hope that the WUSB spec will be changed to reflect this.
+ */
+static
+int uwb_rc_ie_is_host_settable(enum uwb_ie element_id)
+{
+	if (element_id == UWB_PCA_AVAILABILITY ||
+	    element_id == UWB_BP_SWITCH_IE ||
+	    element_id == UWB_MAC_CAPABILITIES_IE ||
+	    element_id == UWB_PHY_CAPABILITIES_IE ||
+	    element_id == UWB_APP_SPEC_PROBE_IE ||
+	    element_id == UWB_IDENTIFICATION_IE ||
+	    element_id == UWB_MASTER_KEY_ID_IE ||
+	    element_id == UWB_IE_WLP ||
+	    element_id == UWB_APP_SPEC_IE)
+		return 1;
+	return 0;
+}
+
+
+/**
+ * Extract Host Settable IEs from IE
+ *
+ * @ie_data: pointer to buffer containing all IEs
+ * @size:    size of buffer
+ *
+ * @returns: length of buffer that only includes host settable IEs
+ *
+ * Given a buffer of IEs we move all Host Settable IEs to front of buffer
+ * by overwriting the IEs that are not Host Settable.
+ * Buffer length is adjusted accordingly.
+ */
+static
+ssize_t uwb_rc_parse_host_settable_ie(struct uwb_dev *uwb_dev,
+				      void *ie_data, size_t size)
+{
+	size_t new_len = size;
+	struct uwb_ie_hdr *ie_hdr;
+	size_t ie_length;
+	void *itr = ie_data, *top = itr + size;
+
+	while (itr < top) {
+		if (uwb_rc_ie_verify(uwb_dev, ie_data, itr, top) != 0)
+			break;
+		ie_hdr = itr;
+		ie_length = sizeof(*ie_hdr) + ie_hdr->length;
+		if (uwb_rc_ie_is_host_settable(ie_hdr->element_id)) {
+			itr += ie_length;
+		} else {
+			memmove(itr, itr + ie_length, top - (itr + ie_length));
+			new_len -= ie_length;
+			top -= ie_length;
+		}
+	}
+	return new_len;
+}
+
+
+/* Cleanup the whole IE management subsystem */
+void uwb_rc_ie_init(struct uwb_rc *uwb_rc)
+{
+	mutex_init(&uwb_rc->ies_mutex);
+}
+
+
+/**
+ * Set up cache for host settable IEs currently being transmitted
+ *
+ * First we just call GET-IE to get the current IEs being transmitted
+ * (or we workaround and pretend we did) and (because the format is
+ * the same) reuse that as the IE cache (with the command prefix, as
+ * explained in 'struct uwb_rc').
+ *
+ * @returns: size of cache created
+ */
+ssize_t uwb_rc_ie_setup(struct uwb_rc *uwb_rc)
+{
+	struct device *dev = &uwb_rc->uwb_dev.dev;
+	ssize_t result;
+	size_t capacity;
+	struct uwb_rc_evt_get_ie *ie_info;
+
+	d_fnstart(3, dev, "(%p)\n", uwb_rc);
+	mutex_lock(&uwb_rc->ies_mutex);
+	result = uwb_rc_get_ie(uwb_rc, &ie_info);
+	if (result < 0)
+		goto error_get_ie;
+	capacity = result;
+	d_printf(5, dev, "Got IEs %zu bytes (%zu long at %p)\n", result,
+		 (size_t)le16_to_cpu(ie_info->wIELength), ie_info);
+
+	/* Remove IEs that host should not set. */
+	result = uwb_rc_parse_host_settable_ie(&uwb_rc->uwb_dev,
+			ie_info->IEData, le16_to_cpu(ie_info->wIELength));
+	if (result < 0)
+		goto error_parse;
+	d_printf(5, dev, "purged non-settable IEs to %zu bytes\n", result);
+	uwb_rc->ies = (void *) ie_info;
+	uwb_rc->ies->rccb.bCommandType = UWB_RC_CET_GENERAL;
+	uwb_rc->ies->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SET_IE);
+	uwb_rc->ies_capacity = capacity;
+	d_printf(5, dev, "IE cache at %p %zu bytes, %zu capacity\n",
+		 ie_info, result, capacity);
+	result = 0;
+error_parse:
+error_get_ie:
+	mutex_unlock(&uwb_rc->ies_mutex);
+	d_fnend(3, dev, "(%p) = %zu\n", uwb_rc, result);
+	return result;
+}
+
+
+/* Cleanup the whole IE management subsystem */
+void uwb_rc_ie_release(struct uwb_rc *uwb_rc)
+{
+	kfree(uwb_rc->ies);
+	uwb_rc->ies = NULL;
+	uwb_rc->ies_capacity = 0;
+}
+
+
+static
+int __acc_size(struct uwb_dev *uwb_dev, const struct uwb_ie_hdr *ie_hdr,
+	       size_t offset, void *_ctx)
+{
+	size_t *acc_size = _ctx;
+	*acc_size += sizeof(*ie_hdr) + ie_hdr->length;
+	d_printf(6, &uwb_dev->dev, "new acc size %zu\n", *acc_size);
+	return 0;
+}
+
+
+/**
+ * Add a new IE to IEs currently being transmitted by device
+ *
+ * @ies: the buffer containing the new IE or IEs to be added to
+ *       the device's beacon. The buffer will be verified for
+ *       consistence (meaning the headers should be right) and
+ *       consistent with the buffer size.
+ * @size: size of @ies (in bytes, total buffer size)
+ * @returns: 0 if ok, <0 errno code on error
+ *
+ * According to WHCI 0.95 [4.13.6] the driver will only receive the RCEB
+ * after the device sent the first beacon that includes the IEs specified
+ * in the SET IE command. We thus cannot send this command if the device is
+ * not beaconing. Instead, a SET IE command will be sent later right after
+ * we start beaconing.
+ *
+ * Setting an IE on the device will overwrite all current IEs in device. So
+ * we take the current IEs being transmitted by the device, append the
+ * new one, and call SET IE with all the IEs needed.
+ *
+ * The local IE cache will only be updated with the new IE if SET IE
+ * completed successfully.
+ */
+int uwb_rc_ie_add(struct uwb_rc *uwb_rc,
+		  const struct uwb_ie_hdr *ies, size_t size)
+{
+	int result = 0;
+	struct device *dev = &uwb_rc->uwb_dev.dev;
+	struct uwb_rc_cmd_set_ie *new_ies;
+	size_t ies_size, total_size, acc_size = 0;
+
+	if (uwb_rc->ies == NULL)
+		return -ESHUTDOWN;
+	uwb_ie_for_each(&uwb_rc->uwb_dev, __acc_size, &acc_size, ies, size);
+	if (acc_size != size) {
+		dev_err(dev, "BUG: bad IEs, misconstructed headers "
+			"[%zu bytes reported vs %zu calculated]\n",
+			size, acc_size);
+		WARN_ON(1);
+		return -EINVAL;
+	}
+	mutex_lock(&uwb_rc->ies_mutex);
+	ies_size = le16_to_cpu(uwb_rc->ies->wIELength);
+	total_size = sizeof(*uwb_rc->ies) + ies_size;
+	if (total_size + size > uwb_rc->ies_capacity) {
+		d_printf(4, dev, "Reallocating IE cache from %p capacity %zu "
+			 "to capacity %zu\n", uwb_rc->ies, uwb_rc->ies_capacity,
+			 total_size + size);
+		new_ies = kzalloc(total_size + size, GFP_KERNEL);
+		if (new_ies == NULL) {
+			dev_err(dev, "No memory for adding new IE\n");
+			result = -ENOMEM;
+			goto error_alloc;
+		}
+		memcpy(new_ies, uwb_rc->ies, total_size);
+		uwb_rc->ies_capacity = total_size + size;
+		kfree(uwb_rc->ies);
+		uwb_rc->ies = new_ies;
+		d_printf(4, dev, "New IE cache at %p capacity %zu\n",
+			 uwb_rc->ies, uwb_rc->ies_capacity);
+	}
+	memcpy((void *)uwb_rc->ies + total_size, ies, size);
+	uwb_rc->ies->wIELength = cpu_to_le16(ies_size + size);
+	if (uwb_rc->beaconing != -1) {
+		result = uwb_rc_set_ie(uwb_rc, uwb_rc->ies);
+		if (result < 0) {
+			dev_err(dev, "Cannot set new IE on device: %d\n",
+				result);
+			uwb_rc->ies->wIELength = cpu_to_le16(ies_size);
+		} else
+			result = 0;
+	}
+	d_printf(4, dev, "IEs now occupy %hu bytes of %zu capacity at %p\n",
+		 le16_to_cpu(uwb_rc->ies->wIELength), uwb_rc->ies_capacity,
+		 uwb_rc->ies);
+error_alloc:
+	mutex_unlock(&uwb_rc->ies_mutex);
+	return result;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_ie_add);
+
+
+/*
+ * Remove an IE from internal cache
+ *
+ * We are dealing with our internal IE cache so no need to verify that the
+ * IEs are valid (it has been done already).
+ *
+ * Should be called with ies_mutex held
+ *
+ * We do not break out once an IE is found in the cache. It is currently
+ * possible to have more than one IE with the same ID included in the
+ * beacon. We don't reallocate, we just mark the size smaller.
+ */
+static
+int uwb_rc_ie_cache_rm(struct uwb_rc *uwb_rc, enum uwb_ie to_remove)
+{
+	struct uwb_ie_hdr *ie_hdr;
+	size_t new_len = le16_to_cpu(uwb_rc->ies->wIELength);
+	void *itr = uwb_rc->ies->IEData;
+	void *top = itr + new_len;
+
+	while (itr < top) {
+		ie_hdr = itr;
+		if (ie_hdr->element_id != to_remove) {
+			itr += sizeof(*ie_hdr) + ie_hdr->length;
+		} else {
+			int ie_length;
+			ie_length = sizeof(*ie_hdr) + ie_hdr->length;
+			if (top - itr != ie_length)
+				memmove(itr, itr + ie_length, top - itr + ie_length);
+			top -= ie_length;
+			new_len -= ie_length;
+		}
+	}
+	uwb_rc->ies->wIELength = cpu_to_le16(new_len);
+	return 0;
+}
+
+
+/**
+ * Remove an IE currently being transmitted by device
+ *
+ * @element_id: id of IE to be removed from device's beacon
+ */
+int uwb_rc_ie_rm(struct uwb_rc *uwb_rc, enum uwb_ie element_id)
+{
+	struct device *dev = &uwb_rc->uwb_dev.dev;
+	int result;
+
+	if (uwb_rc->ies == NULL)
+		return -ESHUTDOWN;
+	mutex_lock(&uwb_rc->ies_mutex);
+	result = uwb_rc_ie_cache_rm(uwb_rc, element_id);
+	if (result < 0)
+		dev_err(dev, "Cannot remove IE from cache.\n");
+	if (uwb_rc->beaconing != -1) {
+		result = uwb_rc_set_ie(uwb_rc, uwb_rc->ies);
+		if (result < 0)
+			dev_err(dev, "Cannot set new IE on device.\n");
+	}
+	mutex_unlock(&uwb_rc->ies_mutex);
+	return result;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_ie_rm);
diff --git a/drivers/uwb/lc-dev.c b/drivers/uwb/lc-dev.c
new file mode 100644
index 0000000..15f856c
--- /dev/null
+++ b/drivers/uwb/lc-dev.c
@@ -0,0 +1,492 @@
+/*
+ * Ultra Wide Band
+ * Life cycle of devices
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kdev_t.h>
+#include <linux/random.h>
+#include "uwb-internal.h"
+
+#define D_LOCAL 1
+#include <linux/uwb/debug.h>
+
+
+/* We initialize addresses to 0xff (invalid, as it is bcast) */
+static inline void uwb_dev_addr_init(struct uwb_dev_addr *addr)
+{
+	memset(&addr->data, 0xff, sizeof(addr->data));
+}
+
+static inline void uwb_mac_addr_init(struct uwb_mac_addr *addr)
+{
+	memset(&addr->data, 0xff, sizeof(addr->data));
+}
+
+/* @returns !0 if a device @addr is a broadcast address */
+static inline int uwb_dev_addr_bcast(const struct uwb_dev_addr *addr)
+{
+	static const struct uwb_dev_addr bcast = { .data = { 0xff, 0xff } };
+	return !uwb_dev_addr_cmp(addr, &bcast);
+}
+
+/*
+ * Add callback @new to be called when an event occurs in @rc.
+ */
+int uwb_notifs_register(struct uwb_rc *rc, struct uwb_notifs_handler *new)
+{
+	if (mutex_lock_interruptible(&rc->notifs_chain.mutex))
+		return -ERESTARTSYS;
+	list_add(&new->list_node, &rc->notifs_chain.list);
+	mutex_unlock(&rc->notifs_chain.mutex);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uwb_notifs_register);
+
+/*
+ * Remove event handler (callback)
+ */
+int uwb_notifs_deregister(struct uwb_rc *rc, struct uwb_notifs_handler *entry)
+{
+	if (mutex_lock_interruptible(&rc->notifs_chain.mutex))
+		return -ERESTARTSYS;
+	list_del(&entry->list_node);
+	mutex_unlock(&rc->notifs_chain.mutex);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uwb_notifs_deregister);
+
+/*
+ * Notify all event handlers of a given event on @rc
+ *
+ * We are called with a valid reference to the device, or NULL if the
+ * event is not for a particular event (e.g., a BG join event).
+ */
+void uwb_notify(struct uwb_rc *rc, struct uwb_dev *uwb_dev, enum uwb_notifs event)
+{
+	struct uwb_notifs_handler *handler;
+	if (mutex_lock_interruptible(&rc->notifs_chain.mutex))
+		return;
+	if (!list_empty(&rc->notifs_chain.list)) {
+		list_for_each_entry(handler, &rc->notifs_chain.list, list_node) {
+			handler->cb(handler->data, uwb_dev, event);
+		}
+	}
+	mutex_unlock(&rc->notifs_chain.mutex);
+}
+
+/*
+ * Release the backing device of a uwb_dev that has been dynamically allocated.
+ */
+static void uwb_dev_sys_release(struct device *dev)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+
+	d_fnstart(4, NULL, "(dev %p uwb_dev %p)\n", dev, uwb_dev);
+	uwb_bce_put(uwb_dev->bce);
+	d_printf(0, &uwb_dev->dev, "uwb_dev %p freed\n", uwb_dev);
+	memset(uwb_dev, 0x69, sizeof(*uwb_dev));
+	kfree(uwb_dev);
+	d_fnend(4, NULL, "(dev %p uwb_dev %p) = void\n", dev, uwb_dev);
+}
+
+/*
+ * Initialize a UWB device instance
+ *
+ * Alloc, zero and call this function.
+ */
+void uwb_dev_init(struct uwb_dev *uwb_dev)
+{
+	mutex_init(&uwb_dev->mutex);
+	device_initialize(&uwb_dev->dev);
+	uwb_dev->dev.release = uwb_dev_sys_release;
+	uwb_dev_addr_init(&uwb_dev->dev_addr);
+	uwb_mac_addr_init(&uwb_dev->mac_addr);
+	bitmap_fill(uwb_dev->streams, UWB_NUM_GLOBAL_STREAMS);
+}
+
+static ssize_t uwb_dev_EUI_48_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	char addr[UWB_ADDR_STRSIZE];
+
+	uwb_mac_addr_print(addr, sizeof(addr), &uwb_dev->mac_addr);
+	return sprintf(buf, "%s\n", addr);
+}
+static DEVICE_ATTR(EUI_48, S_IRUGO, uwb_dev_EUI_48_show, NULL);
+
+static ssize_t uwb_dev_DevAddr_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	char addr[UWB_ADDR_STRSIZE];
+
+	uwb_dev_addr_print(addr, sizeof(addr), &uwb_dev->dev_addr);
+	return sprintf(buf, "%s\n", addr);
+}
+static DEVICE_ATTR(DevAddr, S_IRUGO, uwb_dev_DevAddr_show, NULL);
+
+/*
+ * Show the BPST of this device.
+ *
+ * Calculated from the receive time of the device's beacon and it's
+ * slot number.
+ */
+static ssize_t uwb_dev_BPST_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_beca_e *bce;
+	struct uwb_beacon_frame *bf;
+	u16 bpst;
+
+	bce = uwb_dev->bce;
+	mutex_lock(&bce->mutex);
+	bf = (struct uwb_beacon_frame *)bce->be->BeaconInfo;
+	bpst = bce->be->wBPSTOffset
+		- (u16)(bf->Beacon_Slot_Number * UWB_BEACON_SLOT_LENGTH_US);
+	mutex_unlock(&bce->mutex);
+
+	return sprintf(buf, "%d\n", bpst);
+}
+static DEVICE_ATTR(BPST, S_IRUGO, uwb_dev_BPST_show, NULL);
+
+/*
+ * Show the IEs a device is beaconing
+ *
+ * We need to access the beacon cache, so we just lock it really
+ * quick, print the IEs and unlock.
+ *
+ * We have a reference on the cache entry, so that should be
+ * quite safe.
+ */
+static ssize_t uwb_dev_IEs_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+
+	return uwb_bce_print_IEs(uwb_dev, uwb_dev->bce, buf, PAGE_SIZE);
+}
+static DEVICE_ATTR(IEs, S_IRUGO | S_IWUSR, uwb_dev_IEs_show, NULL);
+
+static ssize_t uwb_dev_LQE_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_beca_e *bce = uwb_dev->bce;
+	size_t result;
+
+	mutex_lock(&bce->mutex);
+	result = stats_show(&uwb_dev->bce->lqe_stats, buf);
+	mutex_unlock(&bce->mutex);
+	return result;
+}
+
+static ssize_t uwb_dev_LQE_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t size)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_beca_e *bce = uwb_dev->bce;
+	ssize_t result;
+
+	mutex_lock(&bce->mutex);
+	result = stats_store(&uwb_dev->bce->lqe_stats, buf, size);
+	mutex_unlock(&bce->mutex);
+	return result;
+}
+static DEVICE_ATTR(LQE, S_IRUGO | S_IWUSR, uwb_dev_LQE_show, uwb_dev_LQE_store);
+
+static ssize_t uwb_dev_RSSI_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_beca_e *bce = uwb_dev->bce;
+	size_t result;
+
+	mutex_lock(&bce->mutex);
+	result = stats_show(&uwb_dev->bce->rssi_stats, buf);
+	mutex_unlock(&bce->mutex);
+	return result;
+}
+
+static ssize_t uwb_dev_RSSI_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t size)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_beca_e *bce = uwb_dev->bce;
+	ssize_t result;
+
+	mutex_lock(&bce->mutex);
+	result = stats_store(&uwb_dev->bce->rssi_stats, buf, size);
+	mutex_unlock(&bce->mutex);
+	return result;
+}
+static DEVICE_ATTR(RSSI, S_IRUGO | S_IWUSR, uwb_dev_RSSI_show, uwb_dev_RSSI_store);
+
+
+static struct attribute *dev_attrs[] = {
+	&dev_attr_EUI_48.attr,
+	&dev_attr_DevAddr.attr,
+	&dev_attr_BPST.attr,
+	&dev_attr_IEs.attr,
+	&dev_attr_LQE.attr,
+	&dev_attr_RSSI.attr,
+	NULL,
+};
+
+static struct attribute_group dev_attr_group = {
+	.attrs = dev_attrs,
+};
+
+static struct attribute_group *groups[] = {
+	&dev_attr_group,
+	NULL,
+};
+
+/**
+ * Device SYSFS registration
+ *
+ *
+ */
+static int __uwb_dev_sys_add(struct uwb_dev *uwb_dev, struct device *parent_dev)
+{
+	int result;
+	struct device *dev;
+
+	d_fnstart(4, NULL, "(uwb_dev %p parent_dev %p)\n", uwb_dev, parent_dev);
+	BUG_ON(parent_dev == NULL);
+
+	dev = &uwb_dev->dev;
+	/* Device sysfs files are only useful for neighbor devices not
+	   local radio controllers. */
+	if (&uwb_dev->rc->uwb_dev != uwb_dev)
+		dev->groups = groups;
+	dev->parent = parent_dev;
+	dev_set_drvdata(dev, uwb_dev);
+
+	result = device_add(dev);
+	d_fnend(4, NULL, "(uwb_dev %p parent_dev %p) = %d\n", uwb_dev, parent_dev, result);
+	return result;
+}
+
+
+static void __uwb_dev_sys_rm(struct uwb_dev *uwb_dev)
+{
+	d_fnstart(4, NULL, "(uwb_dev %p)\n", uwb_dev);
+	dev_set_drvdata(&uwb_dev->dev, NULL);
+	device_del(&uwb_dev->dev);
+	d_fnend(4, NULL, "(uwb_dev %p) = void\n", uwb_dev);
+}
+
+
+/**
+ * Register and initialize a new UWB device
+ *
+ * Did you call uwb_dev_init() on it?
+ *
+ * @parent_rc: is the parent radio controller who has the link to the
+ *             device. When registering the UWB device that is a UWB
+ *             Radio Controller, we point back to it.
+ *
+ * If registering the device that is part of a radio, caller has set
+ * rc->uwb_dev->dev. Otherwise it is to be left NULL--a new one will
+ * be allocated.
+ */
+int uwb_dev_add(struct uwb_dev *uwb_dev, struct device *parent_dev,
+		struct uwb_rc *parent_rc)
+{
+	int result;
+	struct device *dev;
+
+	BUG_ON(uwb_dev == NULL);
+	BUG_ON(parent_dev == NULL);
+	BUG_ON(parent_rc == NULL);
+
+	mutex_lock(&uwb_dev->mutex);
+	dev = &uwb_dev->dev;
+	uwb_dev->rc = parent_rc;
+	result = __uwb_dev_sys_add(uwb_dev, parent_dev);
+	if (result < 0)
+		printk(KERN_ERR "UWB: unable to register dev %s with sysfs: %d\n",
+		       dev_name(dev), result);
+	mutex_unlock(&uwb_dev->mutex);
+	return result;
+}
+
+
+void uwb_dev_rm(struct uwb_dev *uwb_dev)
+{
+	mutex_lock(&uwb_dev->mutex);
+	__uwb_dev_sys_rm(uwb_dev);
+	mutex_unlock(&uwb_dev->mutex);
+}
+
+
+static
+int __uwb_dev_try_get(struct device *dev, void *__target_uwb_dev)
+{
+	struct uwb_dev *target_uwb_dev = __target_uwb_dev;
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	if (uwb_dev == target_uwb_dev) {
+		uwb_dev_get(uwb_dev);
+		return 1;
+	} else
+		return 0;
+}
+
+
+/**
+ * Given a UWB device descriptor, validate and refcount it
+ *
+ * @returns NULL if the device does not exist or is quiescing; the ptr to
+ *               it otherwise.
+ */
+struct uwb_dev *uwb_dev_try_get(struct uwb_rc *rc, struct uwb_dev *uwb_dev)
+{
+	if (uwb_dev_for_each(rc, __uwb_dev_try_get, uwb_dev))
+		return uwb_dev;
+	else
+		return NULL;
+}
+EXPORT_SYMBOL_GPL(uwb_dev_try_get);
+
+
+/**
+ * Remove a device from the system [grunt for other functions]
+ */
+int __uwb_dev_offair(struct uwb_dev *uwb_dev, struct uwb_rc *rc)
+{
+	struct device *dev = &uwb_dev->dev;
+	char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE];
+
+	d_fnstart(3, NULL, "(dev %p [uwb_dev %p], uwb_rc %p)\n", dev, uwb_dev, rc);
+	uwb_mac_addr_print(macbuf, sizeof(macbuf), &uwb_dev->mac_addr);
+	uwb_dev_addr_print(devbuf, sizeof(devbuf), &uwb_dev->dev_addr);
+	dev_info(dev, "uwb device (mac %s dev %s) disconnected from %s %s\n",
+		 macbuf, devbuf,
+		 rc ? rc->uwb_dev.dev.parent->bus->name : "n/a",
+		 rc ? dev_name(rc->uwb_dev.dev.parent) : "");
+	uwb_dev_rm(uwb_dev);
+	uwb_dev_put(uwb_dev);	/* for the creation in _onair() */
+	d_fnend(3, NULL, "(dev %p [uwb_dev %p], uwb_rc %p) = 0\n", dev, uwb_dev, rc);
+	return 0;
+}
+
+
+/**
+ * A device went off the air, clean up after it!
+ *
+ * This is called by the UWB Daemon (through the beacon purge function
+ * uwb_bcn_cache_purge) when it is detected that a device has been in
+ * radio silence for a while.
+ *
+ * If this device is actually a local radio controller we don't need
+ * to go through the offair process, as it is not registered as that.
+ *
+ * NOTE: uwb_bcn_cache.mutex is held!
+ */
+void uwbd_dev_offair(struct uwb_beca_e *bce)
+{
+	struct uwb_dev *uwb_dev;
+
+	uwb_dev = bce->uwb_dev;
+	if (uwb_dev) {
+		uwb_notify(uwb_dev->rc, uwb_dev, UWB_NOTIF_OFFAIR);
+		__uwb_dev_offair(uwb_dev, uwb_dev->rc);
+	}
+}
+
+
+/**
+ * A device went on the air, start it up!
+ *
+ * This is called by the UWB Daemon when it is detected that a device
+ * has popped up in the radio range of the radio controller.
+ *
+ * It will just create the freaking device, register the beacon and
+ * stuff and yatla, done.
+ *
+ *
+ * NOTE: uwb_beca.mutex is held, bce->mutex is held
+ */
+void uwbd_dev_onair(struct uwb_rc *rc, struct uwb_beca_e *bce)
+{
+	int result;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_dev *uwb_dev;
+	char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE];
+
+	uwb_mac_addr_print(macbuf, sizeof(macbuf), bce->mac_addr);
+	uwb_dev_addr_print(devbuf, sizeof(devbuf), &bce->dev_addr);
+	uwb_dev = kzalloc(sizeof(struct uwb_dev), GFP_KERNEL);
+	if (uwb_dev == NULL) {
+		dev_err(dev, "new device %s: Cannot allocate memory\n",
+			macbuf);
+		return;
+	}
+	uwb_dev_init(uwb_dev);		/* This sets refcnt to one, we own it */
+	uwb_dev->mac_addr = *bce->mac_addr;
+	uwb_dev->dev_addr = bce->dev_addr;
+	dev_set_name(&uwb_dev->dev, macbuf);
+	result = uwb_dev_add(uwb_dev, &rc->uwb_dev.dev, rc);
+	if (result < 0) {
+		dev_err(dev, "new device %s: cannot instantiate device\n",
+			macbuf);
+		goto error_dev_add;
+	}
+	/* plug the beacon cache */
+	bce->uwb_dev = uwb_dev;
+	uwb_dev->bce = bce;
+	uwb_bce_get(bce);		/* released in uwb_dev_sys_release() */
+	dev_info(dev, "uwb device (mac %s dev %s) connected to %s %s\n",
+		 macbuf, devbuf, rc->uwb_dev.dev.parent->bus->name,
+		 dev_name(rc->uwb_dev.dev.parent));
+	uwb_notify(rc, uwb_dev, UWB_NOTIF_ONAIR);
+	return;
+
+error_dev_add:
+	kfree(uwb_dev);
+	return;
+}
+
+/**
+ * Iterate over the list of UWB devices, calling a @function on each
+ *
+ * See docs for bus_for_each()....
+ *
+ * @rc:       radio controller for the devices.
+ * @function: function to call.
+ * @priv:     data to pass to @function.
+ * @returns:  0 if no invocation of function() returned a value
+ *            different to zero. That value otherwise.
+ */
+int uwb_dev_for_each(struct uwb_rc *rc, uwb_dev_for_each_f function, void *priv)
+{
+	return device_for_each_child(&rc->uwb_dev.dev, priv, function);
+}
+EXPORT_SYMBOL_GPL(uwb_dev_for_each);
diff --git a/drivers/uwb/lc-rc.c b/drivers/uwb/lc-rc.c
new file mode 100644
index 0000000..ee5772f
--- /dev/null
+++ b/drivers/uwb/lc-rc.c
@@ -0,0 +1,495 @@
+/*
+ * Ultra Wide Band
+ * Life cycle of radio controllers
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * A UWB radio controller is also a UWB device, so it embeds one...
+ *
+ * List of RCs comes from the 'struct class uwb_rc_class'.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/random.h>
+#include <linux/kdev_t.h>
+#include <linux/etherdevice.h>
+#include <linux/usb.h>
+
+#define D_LOCAL 1
+#include <linux/uwb/debug.h>
+#include "uwb-internal.h"
+
+static int uwb_rc_index_match(struct device *dev, void *data)
+{
+	int *index = data;
+	struct uwb_rc *rc = dev_get_drvdata(dev);
+
+	if (rc->index == *index)
+		return 1;
+	return 0;
+}
+
+static struct uwb_rc *uwb_rc_find_by_index(int index)
+{
+	struct device *dev;
+	struct uwb_rc *rc = NULL;
+
+	dev = class_find_device(&uwb_rc_class, NULL, &index, uwb_rc_index_match);
+	if (dev)
+		rc = dev_get_drvdata(dev);
+	return rc;
+}
+
+static int uwb_rc_new_index(void)
+{
+	int index = 0;
+
+	for (;;) {
+		if (!uwb_rc_find_by_index(index))
+			return index;
+		if (++index < 0)
+			index = 0;
+	}
+}
+
+/**
+ * Release the backing device of a uwb_rc that has been dynamically allocated.
+ */
+static void uwb_rc_sys_release(struct device *dev)
+{
+	struct uwb_dev *uwb_dev = container_of(dev, struct uwb_dev, dev);
+	struct uwb_rc *rc = container_of(uwb_dev, struct uwb_rc, uwb_dev);
+
+	uwb_rc_neh_destroy(rc);
+	uwb_rc_ie_release(rc);
+	d_printf(1, dev, "freed uwb_rc %p\n", rc);
+	kfree(rc);
+}
+
+
+void uwb_rc_init(struct uwb_rc *rc)
+{
+	struct uwb_dev *uwb_dev = &rc->uwb_dev;
+
+	uwb_dev_init(uwb_dev);
+	rc->uwb_dev.dev.class = &uwb_rc_class;
+	rc->uwb_dev.dev.release = uwb_rc_sys_release;
+	uwb_rc_neh_create(rc);
+	rc->beaconing = -1;
+	rc->scan_type = UWB_SCAN_DISABLED;
+	INIT_LIST_HEAD(&rc->notifs_chain.list);
+	mutex_init(&rc->notifs_chain.mutex);
+	uwb_drp_avail_init(rc);
+	uwb_rc_ie_init(rc);
+	uwb_rsv_init(rc);
+	uwb_rc_pal_init(rc);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_init);
+
+
+struct uwb_rc *uwb_rc_alloc(void)
+{
+	struct uwb_rc *rc;
+	rc = kzalloc(sizeof(*rc), GFP_KERNEL);
+	if (rc == NULL)
+		return NULL;
+	uwb_rc_init(rc);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_alloc);
+
+static struct attribute *rc_attrs[] = {
+		&dev_attr_mac_address.attr,
+		&dev_attr_scan.attr,
+		&dev_attr_beacon.attr,
+		NULL,
+};
+
+static struct attribute_group rc_attr_group = {
+	.attrs = rc_attrs,
+};
+
+/*
+ * Registration of sysfs specific stuff
+ */
+static int uwb_rc_sys_add(struct uwb_rc *rc)
+{
+	return sysfs_create_group(&rc->uwb_dev.dev.kobj, &rc_attr_group);
+}
+
+
+static void __uwb_rc_sys_rm(struct uwb_rc *rc)
+{
+	sysfs_remove_group(&rc->uwb_dev.dev.kobj, &rc_attr_group);
+}
+
+/**
+ * uwb_rc_mac_addr_setup - get an RC's EUI-48 address or set it
+ * @rc:  the radio controller.
+ *
+ * If the EUI-48 address is 00:00:00:00:00:00 or FF:FF:FF:FF:FF:FF
+ * then a random locally administered EUI-48 is generated and set on
+ * the device.  The probability of address collisions is sufficiently
+ * unlikely (1/2^40 = 9.1e-13) that they're not checked for.
+ */
+static
+int uwb_rc_mac_addr_setup(struct uwb_rc *rc)
+{
+	int result;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_dev *uwb_dev = &rc->uwb_dev;
+	char devname[UWB_ADDR_STRSIZE];
+	struct uwb_mac_addr addr;
+
+	result = uwb_rc_mac_addr_get(rc, &addr);
+	if (result < 0) {
+		dev_err(dev, "cannot retrieve UWB EUI-48 address: %d\n", result);
+		return result;
+	}
+
+	if (uwb_mac_addr_unset(&addr) || uwb_mac_addr_bcast(&addr)) {
+		addr.data[0] = 0x02; /* locally adminstered and unicast */
+		get_random_bytes(&addr.data[1], sizeof(addr.data)-1);
+
+		result = uwb_rc_mac_addr_set(rc, &addr);
+		if (result < 0) {
+			uwb_mac_addr_print(devname, sizeof(devname), &addr);
+			dev_err(dev, "cannot set EUI-48 address %s: %d\n",
+				devname, result);
+			return result;
+		}
+	}
+	uwb_dev->mac_addr = addr;
+	return 0;
+}
+
+
+
+static int uwb_rc_setup(struct uwb_rc *rc)
+{
+	int result;
+	struct device *dev = &rc->uwb_dev.dev;
+
+	result = uwb_rc_reset(rc);
+	if (result < 0) {
+		dev_err(dev, "cannot reset UWB radio: %d\n", result);
+		goto error;
+	}
+	result = uwb_rc_mac_addr_setup(rc);
+	if (result < 0) {
+		dev_err(dev, "cannot setup UWB MAC address: %d\n", result);
+		goto error;
+	}
+	result = uwb_rc_dev_addr_assign(rc);
+	if (result < 0) {
+		dev_err(dev, "cannot assign UWB DevAddr: %d\n", result);
+		goto error;
+	}
+	result = uwb_rc_ie_setup(rc);
+	if (result < 0) {
+		dev_err(dev, "cannot setup IE subsystem: %d\n", result);
+		goto error_ie_setup;
+	}
+	result = uwb_rsv_setup(rc);
+	if (result < 0) {
+		dev_err(dev, "cannot setup reservation subsystem: %d\n", result);
+		goto error_rsv_setup;
+	}
+	uwb_dbg_add_rc(rc);
+	return 0;
+
+error_rsv_setup:
+	uwb_rc_ie_release(rc);
+error_ie_setup:
+error:
+	return result;
+}
+
+
+/**
+ * Register a new UWB radio controller
+ *
+ * Did you call uwb_rc_init() on your rc?
+ *
+ * We assume that this is being called with a > 0 refcount on
+ * it [through ops->{get|put}_device(). We'll take our own, though.
+ *
+ * @parent_dev is our real device, the one that provides the actual UWB device
+ */
+int uwb_rc_add(struct uwb_rc *rc, struct device *parent_dev, void *priv)
+{
+	int result;
+	struct device *dev;
+	char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE];
+
+	rc->index = uwb_rc_new_index();
+
+	dev = &rc->uwb_dev.dev;
+	dev_set_name(dev, "uwb%d", rc->index);
+
+	rc->priv = priv;
+
+	result = rc->start(rc);
+	if (result < 0)
+		goto error_rc_start;
+
+	result = uwb_rc_setup(rc);
+	if (result < 0) {
+		dev_err(dev, "cannot setup UWB radio controller: %d\n", result);
+		goto error_rc_setup;
+	}
+
+	result = uwb_dev_add(&rc->uwb_dev, parent_dev, rc);
+	if (result < 0 && result != -EADDRNOTAVAIL)
+		goto error_dev_add;
+
+	result = uwb_rc_sys_add(rc);
+	if (result < 0) {
+		dev_err(parent_dev, "cannot register UWB radio controller "
+			"dev attributes: %d\n", result);
+		goto error_sys_add;
+	}
+
+	uwb_mac_addr_print(macbuf, sizeof(macbuf), &rc->uwb_dev.mac_addr);
+	uwb_dev_addr_print(devbuf, sizeof(devbuf), &rc->uwb_dev.dev_addr);
+	dev_info(dev,
+		 "new uwb radio controller (mac %s dev %s) on %s %s\n",
+		 macbuf, devbuf, parent_dev->bus->name, dev_name(parent_dev));
+	rc->ready = 1;
+	return 0;
+
+error_sys_add:
+	uwb_dev_rm(&rc->uwb_dev);
+error_dev_add:
+error_rc_setup:
+	rc->stop(rc);
+	uwbd_flush(rc);
+error_rc_start:
+	return result;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_add);
+
+
+static int uwb_dev_offair_helper(struct device *dev, void *priv)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+
+	return __uwb_dev_offair(uwb_dev, uwb_dev->rc);
+}
+
+/*
+ * Remove a Radio Controller; stop beaconing/scanning, disconnect all children
+ */
+void uwb_rc_rm(struct uwb_rc *rc)
+{
+	rc->ready = 0;
+
+	uwb_dbg_del_rc(rc);
+	uwb_rsv_cleanup(rc);
+	uwb_rc_ie_rm(rc, UWB_IDENTIFICATION_IE);
+	if (rc->beaconing >= 0)
+		uwb_rc_beacon(rc, -1, 0);
+	if (rc->scan_type != UWB_SCAN_DISABLED)
+		uwb_rc_scan(rc, rc->scanning, UWB_SCAN_DISABLED, 0);
+	uwb_rc_reset(rc);
+
+	rc->stop(rc);
+	uwbd_flush(rc);
+
+	uwb_dev_lock(&rc->uwb_dev);
+	rc->priv = NULL;
+	rc->cmd = NULL;
+	uwb_dev_unlock(&rc->uwb_dev);
+	mutex_lock(&uwb_beca.mutex);
+	uwb_dev_for_each(rc, uwb_dev_offair_helper, NULL);
+	__uwb_rc_sys_rm(rc);
+	mutex_unlock(&uwb_beca.mutex);
+	uwb_dev_rm(&rc->uwb_dev);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_rm);
+
+static int find_rc_try_get(struct device *dev, void *data)
+{
+	struct uwb_rc *target_rc = data;
+	struct uwb_rc *rc = dev_get_drvdata(dev);
+
+	if (rc == NULL) {
+		WARN_ON(1);
+		return 0;
+	}
+	if (rc == target_rc) {
+		if (rc->ready == 0)
+			return 0;
+		else
+			return 1;
+	}
+	return 0;
+}
+
+/**
+ * Given a radio controller descriptor, validate and refcount it
+ *
+ * @returns NULL if the rc does not exist or is quiescing; the ptr to
+ *               it otherwise.
+ */
+struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *target_rc)
+{
+	struct device *dev;
+	struct uwb_rc *rc = NULL;
+
+	dev = class_find_device(&uwb_rc_class, NULL, target_rc,
+				find_rc_try_get);
+	if (dev) {
+		rc = dev_get_drvdata(dev);
+		__uwb_rc_get(rc);
+	}
+	return rc;
+}
+EXPORT_SYMBOL_GPL(__uwb_rc_try_get);
+
+/*
+ * RC get for external refcount acquirers...
+ *
+ * Increments the refcount of the device and it's backend modules
+ */
+static inline struct uwb_rc *uwb_rc_get(struct uwb_rc *rc)
+{
+	if (rc->ready == 0)
+		return NULL;
+	uwb_dev_get(&rc->uwb_dev);
+	return rc;
+}
+
+static int find_rc_grandpa(struct device *dev, void *data)
+{
+	struct device *grandpa_dev = data;
+	struct uwb_rc *rc = dev_get_drvdata(dev);
+
+	if (rc->uwb_dev.dev.parent->parent == grandpa_dev) {
+		rc = uwb_rc_get(rc);
+		return 1;
+	}
+	return 0;
+}
+
+/**
+ * Locate and refcount a radio controller given a common grand-parent
+ *
+ * @grandpa_dev  Pointer to the 'grandparent' device structure.
+ * @returns NULL If the rc does not exist or is quiescing; the ptr to
+ *               it otherwise, properly referenced.
+ *
+ * The Radio Control interface (or the UWB Radio Controller) is always
+ * an interface of a device. The parent is the interface, the
+ * grandparent is the device that encapsulates the interface.
+ *
+ * There is no need to lock around as the "grandpa" would be
+ * refcounted by the target, and to remove the referemes, the
+ * uwb_rc_class->sem would have to be taken--we hold it, ergo we
+ * should be safe.
+ */
+struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *grandpa_dev)
+{
+	struct device *dev;
+	struct uwb_rc *rc = NULL;
+
+	dev = class_find_device(&uwb_rc_class, NULL, (void *)grandpa_dev,
+				find_rc_grandpa);
+	if (dev)
+		rc = dev_get_drvdata(dev);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_get_by_grandpa);
+
+/**
+ * Find a radio controller by device address
+ *
+ * @returns the pointer to the radio controller, properly referenced
+ */
+static int find_rc_dev(struct device *dev, void *data)
+{
+	struct uwb_dev_addr *addr = data;
+	struct uwb_rc *rc = dev_get_drvdata(dev);
+
+	if (rc == NULL) {
+		WARN_ON(1);
+		return 0;
+	}
+	if (!uwb_dev_addr_cmp(&rc->uwb_dev.dev_addr, addr)) {
+		rc = uwb_rc_get(rc);
+		return 1;
+	}
+	return 0;
+}
+
+struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *addr)
+{
+	struct device *dev;
+	struct uwb_rc *rc = NULL;
+
+	dev = class_find_device(&uwb_rc_class, NULL, (void *)addr,
+				find_rc_dev);
+	if (dev)
+		rc = dev_get_drvdata(dev);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_get_by_dev);
+
+/**
+ * Drop a reference on a radio controller
+ *
+ * This is the version that should be done by entities external to the
+ * UWB Radio Control stack (ie: clients of the API).
+ */
+void uwb_rc_put(struct uwb_rc *rc)
+{
+	__uwb_rc_put(rc);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_put);
+
+/*
+ *
+ *
+ */
+ssize_t uwb_rc_print_IEs(struct uwb_rc *uwb_rc, char *buf, size_t size)
+{
+	ssize_t result;
+	struct uwb_rc_evt_get_ie *ie_info;
+	struct uwb_buf_ctx ctx;
+
+	result = uwb_rc_get_ie(uwb_rc, &ie_info);
+	if (result < 0)
+		goto error_get_ie;
+	ctx.buf = buf;
+	ctx.size = size;
+	ctx.bytes = 0;
+	uwb_ie_for_each(&uwb_rc->uwb_dev, uwb_ie_dump_hex, &ctx,
+			ie_info->IEData, result - sizeof(*ie_info));
+	result = ctx.bytes;
+	kfree(ie_info);
+error_get_ie:
+	return result;
+}
+
diff --git a/drivers/uwb/neh.c b/drivers/uwb/neh.c
new file mode 100644
index 0000000..9b4eb64
--- /dev/null
+++ b/drivers/uwb/neh.c
@@ -0,0 +1,616 @@
+/*
+ * WUSB Wire Adapter: Radio Control Interface (WUSB[8])
+ * Notification and Event Handling
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * The RC interface of the Host Wire Adapter (USB dongle) or WHCI PCI
+ * card delivers a stream of notifications and events to the
+ * notification end event endpoint or area. This code takes care of
+ * getting a buffer with that data, breaking it up in separate
+ * notifications and events and then deliver those.
+ *
+ * Events are answers to commands and they carry a context ID that
+ * associates them to the command. Notifications are that,
+ * notifications, they come out of the blue and have a context ID of
+ * zero. Think of the context ID kind of like a handler. The
+ * uwb_rc_neh_* code deals with managing context IDs.
+ *
+ * This is why you require a handle to operate on a UWB host. When you
+ * open a handle a context ID is assigned to you.
+ *
+ * So, as it is done is:
+ *
+ * 1. Add an event handler [uwb_rc_neh_add()] (assigns a ctx id)
+ * 2. Issue command [rc->cmd(rc, ...)]
+ * 3. Arm the timeout timer [uwb_rc_neh_arm()]
+ * 4, Release the reference to the neh [uwb_rc_neh_put()]
+ * 5. Wait for the callback
+ * 6. Command result (RCEB) is passed to the callback
+ *
+ * If (2) fails, you should remove the handle [uwb_rc_neh_rm()]
+ * instead of arming the timer.
+ *
+ * Handles are for using in *serialized* code, single thread.
+ *
+ * When the notification/event comes, the IRQ handler/endpoint
+ * callback passes the data read to uwb_rc_neh_grok() which will break
+ * it up in a discrete series of events, look up who is listening for
+ * them and execute the pertinent callbacks.
+ *
+ * If the reader detects an error while reading the data stream, call
+ * uwb_rc_neh_error().
+ *
+ * CONSTRAINTS/ASSUMPTIONS:
+ *
+ * - Most notifications/events are small (less thank .5k), copying
+ *   around is ok.
+ *
+ * - Notifications/events are ALWAYS smaller than PAGE_SIZE
+ *
+ * - Notifications/events always come in a single piece (ie: a buffer
+ *   will always contain entire notifications/events).
+ *
+ * - we cannot know in advance how long each event is (because they
+ *   lack a length field in their header--smart move by the standards
+ *   body, btw). So we need a facility to get the event size given the
+ *   header. This is what the EST code does (notif/Event Size
+ *   Tables), check nest.c--as well, you can associate the size to
+ *   the handle [w/ neh->extra_size()].
+ *
+ * - Most notifications/events are fixed size; only a few are variable
+ *   size (NEST takes care of that).
+ *
+ * - Listeners of events expect them, so they usually provide a
+ *   buffer, as they know the size. Listeners to notifications don't,
+ *   so we allocate their buffers dynamically.
+ */
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/err.h>
+
+#include "uwb-internal.h"
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+/*
+ * UWB Radio Controller Notification/Event Handle
+ *
+ * Represents an entity waiting for an event coming from the UWB Radio
+ * Controller with a given context id (context) and type (evt_type and
+ * evt). On reception of the notification/event, the callback (cb) is
+ * called with the event.
+ *
+ * If the timer expires before the event is received, the callback is
+ * called with -ETIMEDOUT as the event size.
+ */
+struct uwb_rc_neh {
+	struct kref kref;
+
+	struct uwb_rc *rc;
+	u8 evt_type;
+	__le16 evt;
+	u8 context;
+	uwb_rc_cmd_cb_f cb;
+	void *arg;
+
+	struct timer_list timer;
+	struct list_head list_node;
+};
+
+static void uwb_rc_neh_timer(unsigned long arg);
+
+static void uwb_rc_neh_release(struct kref *kref)
+{
+	struct uwb_rc_neh *neh = container_of(kref, struct uwb_rc_neh, kref);
+
+	kfree(neh);
+}
+
+static void uwb_rc_neh_get(struct uwb_rc_neh *neh)
+{
+	kref_get(&neh->kref);
+}
+
+/**
+ * uwb_rc_neh_put - release reference to a neh
+ * @neh: the neh
+ */
+void uwb_rc_neh_put(struct uwb_rc_neh *neh)
+{
+	kref_put(&neh->kref, uwb_rc_neh_release);
+}
+
+
+/**
+ * Assigns @neh a context id from @rc's pool
+ *
+ * @rc:	    UWB Radio Controller descriptor; @rc->neh_lock taken
+ * @neh:    Notification/Event Handle
+ * @returns 0 if context id was assigned ok; < 0 errno on error (if
+ *	    all the context IDs are taken).
+ *
+ * (assumes @wa is locked).
+ *
+ * NOTE: WUSB spec reserves context ids 0x00 for notifications and
+ *	 0xff is invalid, so they must not be used. Initialization
+ *	 fills up those two in the bitmap so they are not allocated.
+ *
+ * We spread the allocation around to reduce the posiblity of two
+ * consecutive opened @neh's getting the same context ID assigned (to
+ * avoid surprises with late events that timed out long time ago). So
+ * first we search from where @rc->ctx_roll is, if not found, we
+ * search from zero.
+ */
+static
+int __uwb_rc_ctx_get(struct uwb_rc *rc, struct uwb_rc_neh *neh)
+{
+	int result;
+	result = find_next_zero_bit(rc->ctx_bm, UWB_RC_CTX_MAX,
+				    rc->ctx_roll++);
+	if (result < UWB_RC_CTX_MAX)
+		goto found;
+	result = find_first_zero_bit(rc->ctx_bm, UWB_RC_CTX_MAX);
+	if (result < UWB_RC_CTX_MAX)
+		goto found;
+	return -ENFILE;
+found:
+	set_bit(result, rc->ctx_bm);
+	neh->context = result;
+	return 0;
+}
+
+
+/** Releases @neh's context ID back to @rc (@rc->neh_lock is locked). */
+static
+void __uwb_rc_ctx_put(struct uwb_rc *rc, struct uwb_rc_neh *neh)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	if (neh->context == 0)
+		return;
+	if (test_bit(neh->context, rc->ctx_bm) == 0) {
+		dev_err(dev, "context %u not set in bitmap\n",
+			neh->context);
+		WARN_ON(1);
+	}
+	clear_bit(neh->context, rc->ctx_bm);
+	neh->context = 0;
+}
+
+/**
+ * uwb_rc_neh_add - add a neh for a radio controller command
+ * @rc:             the radio controller
+ * @cmd:            the radio controller command
+ * @expected_type:  the type of the expected response event
+ * @expected_event: the expected event ID
+ * @cb:             callback for when the event is received
+ * @arg:            argument for the callback
+ *
+ * Creates a neh and adds it to the list of those waiting for an
+ * event.  A context ID will be assigned to the command.
+ */
+struct uwb_rc_neh *uwb_rc_neh_add(struct uwb_rc *rc, struct uwb_rccb *cmd,
+				  u8 expected_type, u16 expected_event,
+				  uwb_rc_cmd_cb_f cb, void *arg)
+{
+	int result;
+	unsigned long flags;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_rc_neh *neh;
+
+	neh = kzalloc(sizeof(*neh), GFP_KERNEL);
+	if (neh == NULL) {
+		result = -ENOMEM;
+		goto error_kzalloc;
+	}
+
+	kref_init(&neh->kref);
+	INIT_LIST_HEAD(&neh->list_node);
+	init_timer(&neh->timer);
+	neh->timer.function = uwb_rc_neh_timer;
+	neh->timer.data     = (unsigned long)neh;
+
+	neh->rc = rc;
+	neh->evt_type = expected_type;
+	neh->evt = cpu_to_le16(expected_event);
+	neh->cb = cb;
+	neh->arg = arg;
+
+	spin_lock_irqsave(&rc->neh_lock, flags);
+	result = __uwb_rc_ctx_get(rc, neh);
+	if (result >= 0) {
+		cmd->bCommandContext = neh->context;
+		list_add_tail(&neh->list_node, &rc->neh_list);
+		uwb_rc_neh_get(neh);
+	}
+	spin_unlock_irqrestore(&rc->neh_lock, flags);
+	if (result < 0)
+		goto error_ctx_get;
+
+	return neh;
+
+error_ctx_get:
+	kfree(neh);
+error_kzalloc:
+	dev_err(dev, "cannot open handle to radio controller: %d\n", result);
+	return ERR_PTR(result);
+}
+
+static void __uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh)
+{
+	del_timer(&neh->timer);
+	__uwb_rc_ctx_put(rc, neh);
+	list_del(&neh->list_node);
+}
+
+/**
+ * uwb_rc_neh_rm - remove a neh.
+ * @rc:  the radio controller
+ * @neh: the neh to remove
+ *
+ * Remove an active neh immediately instead of waiting for the event
+ * (or a time out).
+ */
+void uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&rc->neh_lock, flags);
+	__uwb_rc_neh_rm(rc, neh);
+	spin_unlock_irqrestore(&rc->neh_lock, flags);
+
+	uwb_rc_neh_put(neh);
+}
+
+/**
+ * uwb_rc_neh_arm - arm an event handler timeout timer
+ *
+ * @rc:     UWB Radio Controller
+ * @neh:    Notification/event handler for @rc
+ *
+ * The timer is only armed if the neh is active.
+ */
+void uwb_rc_neh_arm(struct uwb_rc *rc, struct uwb_rc_neh *neh)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&rc->neh_lock, flags);
+	if (neh->context)
+		mod_timer(&neh->timer,
+			  jiffies + msecs_to_jiffies(UWB_RC_CMD_TIMEOUT_MS));
+	spin_unlock_irqrestore(&rc->neh_lock, flags);
+}
+
+static void uwb_rc_neh_cb(struct uwb_rc_neh *neh, struct uwb_rceb *rceb, size_t size)
+{
+	(*neh->cb)(neh->rc, neh->arg, rceb, size);
+	uwb_rc_neh_put(neh);
+}
+
+static bool uwb_rc_neh_match(struct uwb_rc_neh *neh, const struct uwb_rceb *rceb)
+{
+	return neh->evt_type == rceb->bEventType
+		&& neh->evt == rceb->wEvent
+		&& neh->context == rceb->bEventContext;
+}
+
+/**
+ * Find the handle waiting for a RC Radio Control Event
+ *
+ * @rc:         UWB Radio Controller
+ * @rceb:       Pointer to the RCEB buffer
+ * @event_size: Pointer to the size of the RCEB buffer. Might be
+ *              adjusted to take into account the @neh->extra_size
+ *              settings.
+ *
+ * If the listener has no buffer (NULL buffer), one is allocated for
+ * the right size (the amount of data received). @neh->ptr will point
+ * to the event payload, which always starts with a 'struct
+ * uwb_rceb'. kfree() it when done.
+ */
+static
+struct uwb_rc_neh *uwb_rc_neh_lookup(struct uwb_rc *rc,
+				     const struct uwb_rceb *rceb)
+{
+	struct uwb_rc_neh *neh = NULL, *h;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rc->neh_lock, flags);
+
+	list_for_each_entry(h, &rc->neh_list, list_node) {
+		if (uwb_rc_neh_match(h, rceb)) {
+			neh = h;
+			break;
+		}
+	}
+
+	if (neh)
+		__uwb_rc_neh_rm(rc, neh);
+
+	spin_unlock_irqrestore(&rc->neh_lock, flags);
+
+	return neh;
+}
+
+
+/**
+ * Process notifications coming from the radio control interface
+ *
+ * @rc:    UWB Radio Control Interface descriptor
+ * @neh:   Notification/Event Handler @neh->ptr points to
+ *         @uwb_evt->buffer.
+ *
+ * This function is called by the event/notif handling subsystem when
+ * notifications arrive (hwarc_probe() arms a notification/event handle
+ * that calls back this function for every received notification; this
+ * function then will rearm itself).
+ *
+ * Notification data buffers are dynamically allocated by the NEH
+ * handling code in neh.c [uwb_rc_neh_lookup()]. What is actually
+ * allocated is space to contain the notification data.
+ *
+ * Buffers are prefixed with a Radio Control Event Block (RCEB) as
+ * defined by the WUSB Wired-Adapter Radio Control interface. We
+ * just use it for the notification code.
+ *
+ * On each case statement we just transcode endianess of the different
+ * fields. We declare a pointer to a RCI definition of an event, and
+ * then to a UWB definition of the same event (which are the same,
+ * remember). Event if we use different pointers
+ */
+static
+void uwb_rc_notif(struct uwb_rc *rc, struct uwb_rceb *rceb, ssize_t size)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_event *uwb_evt;
+
+	if (size == -ESHUTDOWN)
+		return;
+	if (size < 0) {
+		dev_err(dev, "ignoring event with error code %zu\n",
+			size);
+		return;
+	}
+
+	uwb_evt = kzalloc(sizeof(*uwb_evt), GFP_ATOMIC);
+	if (unlikely(uwb_evt == NULL)) {
+		dev_err(dev, "no memory to queue event 0x%02x/%04x/%02x\n",
+			rceb->bEventType, le16_to_cpu(rceb->wEvent),
+			rceb->bEventContext);
+		return;
+	}
+	uwb_evt->rc = __uwb_rc_get(rc);	/* will be put by uwbd's uwbd_event_handle() */
+	uwb_evt->ts_jiffies = jiffies;
+	uwb_evt->type = UWB_EVT_TYPE_NOTIF;
+	uwb_evt->notif.size = size;
+	uwb_evt->notif.rceb = rceb;
+
+	switch (le16_to_cpu(rceb->wEvent)) {
+		/* Trap some vendor specific events
+		 *
+		 * FIXME: move this to handling in ptc-est, where we
+		 * register a NULL event handler for these two guys
+		 * using the Intel IDs.
+		 */
+	case 0x0103:
+		dev_info(dev, "FIXME: DEVICE ADD\n");
+		return;
+	case 0x0104:
+		dev_info(dev, "FIXME: DEVICE RM\n");
+		return;
+	default:
+		break;
+	}
+
+	uwbd_event_queue(uwb_evt);
+}
+
+static void uwb_rc_neh_grok_event(struct uwb_rc *rc, struct uwb_rceb *rceb, size_t size)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_rc_neh *neh;
+	struct uwb_rceb *notif;
+
+	if (rceb->bEventContext == 0) {
+		notif = kmalloc(size, GFP_ATOMIC);
+		if (notif) {
+			memcpy(notif, rceb, size);
+			uwb_rc_notif(rc, notif, size);
+		} else
+			dev_err(dev, "event 0x%02x/%04x/%02x (%zu bytes): no memory\n",
+				rceb->bEventType, le16_to_cpu(rceb->wEvent),
+				rceb->bEventContext, size);
+	} else {
+		neh = uwb_rc_neh_lookup(rc, rceb);
+		if (neh)
+			uwb_rc_neh_cb(neh, rceb, size);
+		else
+			dev_warn(dev, "event 0x%02x/%04x/%02x (%zu bytes): nobody cared\n",
+				 rceb->bEventType, le16_to_cpu(rceb->wEvent),
+				 rceb->bEventContext, size);
+	}
+}
+
+/**
+ * Given a buffer with one or more UWB RC events/notifications, break
+ * them up and dispatch them.
+ *
+ * @rc:	      UWB Radio Controller
+ * @buf:      Buffer with the stream of notifications/events
+ * @buf_size: Amount of data in the buffer
+ *
+ * Note each notification/event starts always with a 'struct
+ * uwb_rceb', so the minimum size if 4 bytes.
+ *
+ * The device may pass us events formatted differently than expected.
+ * These are first filtered, potentially creating a new event in a new
+ * memory location. If a new event is created by the filter it is also
+ * freed here.
+ *
+ * For each notif/event, tries to guess the size looking at the EST
+ * tables, then looks for a neh that is waiting for that event and if
+ * found, copies the payload to the neh's buffer and calls it back. If
+ * not, the data is ignored.
+ *
+ * Note that if we can't find a size description in the EST tables, we
+ * still might find a size in the 'neh' handle in uwb_rc_neh_lookup().
+ *
+ * Assumptions:
+ *
+ *   @rc->neh_lock is NOT taken
+ *
+ * We keep track of various sizes here:
+ * size:      contains the size of the buffer that is processed for the
+ *            incoming event. this buffer may contain events that are not
+ *            formatted as WHCI.
+ * real_size: the actual space taken by this event in the buffer.
+ *            We need to keep track of the real size of an event to be able to
+ *            advance the buffer correctly.
+ * event_size: the size of the event as expected by the core layer
+ *            [OR] the size of the event after filtering. if the filtering
+ *            created a new event in a new memory location then this is
+ *            effectively the size of a new event buffer
+ */
+void uwb_rc_neh_grok(struct uwb_rc *rc, void *buf, size_t buf_size)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	void *itr;
+	struct uwb_rceb *rceb;
+	size_t size, real_size, event_size;
+	int needtofree;
+
+	d_fnstart(3, dev, "(rc %p buf %p %zu buf_size)\n", rc, buf, buf_size);
+	d_printf(2, dev, "groking event block: %zu bytes\n", buf_size);
+	itr = buf;
+	size = buf_size;
+	while (size > 0) {
+		if (size < sizeof(*rceb)) {
+			dev_err(dev, "not enough data in event buffer to "
+				"process incoming events (%zu left, minimum is "
+				"%zu)\n", size, sizeof(*rceb));
+			break;
+		}
+
+		rceb = itr;
+		if (rc->filter_event) {
+			needtofree = rc->filter_event(rc, &rceb, size,
+						      &real_size, &event_size);
+			if (needtofree < 0 && needtofree != -ENOANO) {
+				dev_err(dev, "BUG: Unable to filter event "
+					"(0x%02x/%04x/%02x) from "
+					"device. \n", rceb->bEventType,
+					le16_to_cpu(rceb->wEvent),
+					rceb->bEventContext);
+				break;
+			}
+		} else
+			needtofree = -ENOANO;
+		/* do real processing if there was no filtering or the
+		 * filtering didn't act */
+		if (needtofree == -ENOANO) {
+			ssize_t ret = uwb_est_find_size(rc, rceb, size);
+			if (ret < 0)
+				break;
+			if (ret > size) {
+				dev_err(dev, "BUG: hw sent incomplete event "
+					"0x%02x/%04x/%02x (%zd bytes), only got "
+					"%zu bytes. We don't handle that.\n",
+					rceb->bEventType, le16_to_cpu(rceb->wEvent),
+					rceb->bEventContext, ret, size);
+				break;
+			}
+			real_size = event_size = ret;
+		}
+		uwb_rc_neh_grok_event(rc, rceb, event_size);
+
+		if (needtofree == 1)
+			kfree(rceb);
+
+		itr += real_size;
+		size -= real_size;
+		d_printf(2, dev, "consumed %zd bytes, %zu left\n",
+			 event_size, size);
+	}
+	d_fnend(3, dev, "(rc %p buf %p %zu buf_size) = void\n", rc, buf, buf_size);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_neh_grok);
+
+
+/**
+ * The entity that reads from the device notification/event channel has
+ * detected an error.
+ *
+ * @rc:    UWB Radio Controller
+ * @error: Errno error code
+ *
+ */
+void uwb_rc_neh_error(struct uwb_rc *rc, int error)
+{
+	struct uwb_rc_neh *neh, *next;
+	unsigned long flags;
+
+	BUG_ON(error >= 0);
+	spin_lock_irqsave(&rc->neh_lock, flags);
+	list_for_each_entry_safe(neh, next, &rc->neh_list, list_node) {
+		__uwb_rc_neh_rm(rc, neh);
+		uwb_rc_neh_cb(neh, NULL, error);
+	}
+	spin_unlock_irqrestore(&rc->neh_lock, flags);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_neh_error);
+
+
+static void uwb_rc_neh_timer(unsigned long arg)
+{
+	struct uwb_rc_neh *neh = (struct uwb_rc_neh *)arg;
+	struct uwb_rc *rc = neh->rc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rc->neh_lock, flags);
+	__uwb_rc_neh_rm(rc, neh);
+	spin_unlock_irqrestore(&rc->neh_lock, flags);
+
+	uwb_rc_neh_cb(neh, NULL, -ETIMEDOUT);
+}
+
+/** Initializes the @rc's neh subsystem
+ */
+void uwb_rc_neh_create(struct uwb_rc *rc)
+{
+	spin_lock_init(&rc->neh_lock);
+	INIT_LIST_HEAD(&rc->neh_list);
+	set_bit(0, rc->ctx_bm);		/* 0 is reserved (see [WUSB] table 8-65) */
+	set_bit(0xff, rc->ctx_bm);	/* and 0xff is invalid */
+	rc->ctx_roll = 1;
+}
+
+
+/** Release's the @rc's neh subsystem */
+void uwb_rc_neh_destroy(struct uwb_rc *rc)
+{
+	unsigned long flags;
+	struct uwb_rc_neh *neh, *next;
+
+	spin_lock_irqsave(&rc->neh_lock, flags);
+	list_for_each_entry_safe(neh, next, &rc->neh_list, list_node) {
+		__uwb_rc_neh_rm(rc, neh);
+		uwb_rc_neh_put(neh);
+	}
+	spin_unlock_irqrestore(&rc->neh_lock, flags);
+}
diff --git a/drivers/uwb/pal.c b/drivers/uwb/pal.c
new file mode 100644
index 0000000..1afb38e
--- /dev/null
+++ b/drivers/uwb/pal.c
@@ -0,0 +1,91 @@
+/*
+ * UWB PAL support.
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/uwb.h>
+
+#include "uwb-internal.h"
+
+/**
+ * uwb_pal_init - initialize a UWB PAL
+ * @pal: the PAL to initialize
+ */
+void uwb_pal_init(struct uwb_pal *pal)
+{
+	INIT_LIST_HEAD(&pal->node);
+}
+EXPORT_SYMBOL_GPL(uwb_pal_init);
+
+/**
+ * uwb_pal_register - register a UWB PAL
+ * @rc: the radio controller the PAL will be using
+ * @pal: the PAL
+ *
+ * The PAL must be initialized with uwb_pal_init().
+ */
+int uwb_pal_register(struct uwb_rc *rc, struct uwb_pal *pal)
+{
+	int ret;
+
+	if (pal->device) {
+		ret = sysfs_create_link(&pal->device->kobj,
+					&rc->uwb_dev.dev.kobj, "uwb_rc");
+		if (ret < 0)
+			return ret;
+		ret = sysfs_create_link(&rc->uwb_dev.dev.kobj,
+					&pal->device->kobj, pal->name);
+		if (ret < 0) {
+			sysfs_remove_link(&pal->device->kobj, "uwb_rc");
+			return ret;
+		}
+	}
+
+	spin_lock(&rc->pal_lock);
+	list_add(&pal->node, &rc->pals);
+	spin_unlock(&rc->pal_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uwb_pal_register);
+
+/**
+ * uwb_pal_register - unregister a UWB PAL
+ * @rc: the radio controller the PAL was using
+ * @pal: the PAL
+ */
+void uwb_pal_unregister(struct uwb_rc *rc, struct uwb_pal *pal)
+{
+	spin_lock(&rc->pal_lock);
+	list_del(&pal->node);
+	spin_unlock(&rc->pal_lock);
+
+	if (pal->device) {
+		sysfs_remove_link(&rc->uwb_dev.dev.kobj, pal->name);
+		sysfs_remove_link(&pal->device->kobj, "uwb_rc");
+	}
+}
+EXPORT_SYMBOL_GPL(uwb_pal_unregister);
+
+/**
+ * uwb_rc_pal_init - initialize the PAL related parts of a radio controller
+ * @rc: the radio controller
+ */
+void uwb_rc_pal_init(struct uwb_rc *rc)
+{
+	spin_lock_init(&rc->pal_lock);
+	INIT_LIST_HEAD(&rc->pals);
+}
diff --git a/drivers/uwb/reset.c b/drivers/uwb/reset.c
new file mode 100644
index 0000000..8de856f
--- /dev/null
+++ b/drivers/uwb/reset.c
@@ -0,0 +1,362 @@
+/*
+ * Ultra Wide Band
+ * UWB basic command support and radio reset
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME:
+ *
+ *  - docs
+ *
+ *  - Now we are serializing (using the uwb_dev->mutex) the command
+ *    execution; it should be parallelized as much as possible some
+ *    day.
+ */
+#include <linux/kernel.h>
+#include <linux/err.h>
+
+#include "uwb-internal.h"
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+/**
+ * Command result codes (WUSB1.0[T8-69])
+ */
+static
+const char *__strerror[] = {
+	"success",
+	"failure",
+	"hardware failure",
+	"no more slots",
+	"beacon is too large",
+	"invalid parameter",
+	"unsupported power level",
+	"time out (wa) or invalid ie data (whci)",
+	"beacon size exceeded",
+	"cancelled",
+	"invalid state",
+	"invalid size",
+	"ack not recieved",
+	"no more asie notification",
+};
+
+
+/** Return a string matching the given error code */
+const char *uwb_rc_strerror(unsigned code)
+{
+	if (code == 255)
+		return "time out";
+	if (code >= ARRAY_SIZE(__strerror))
+		return "unknown error";
+	return __strerror[code];
+}
+
+int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name,
+		     struct uwb_rccb *cmd, size_t cmd_size,
+		     u8 expected_type, u16 expected_event,
+		     uwb_rc_cmd_cb_f cb, void *arg)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_rc_neh *neh;
+	int needtofree = 0;
+	int result;
+
+	uwb_dev_lock(&rc->uwb_dev);	/* Protect against rc->priv being removed */
+	if (rc->priv == NULL) {
+		uwb_dev_unlock(&rc->uwb_dev);
+		return -ESHUTDOWN;
+	}
+
+	if (rc->filter_cmd) {
+		needtofree = rc->filter_cmd(rc, &cmd, &cmd_size);
+		if (needtofree < 0 && needtofree != -ENOANO) {
+			dev_err(dev, "%s: filter error: %d\n",
+				cmd_name, needtofree);
+			uwb_dev_unlock(&rc->uwb_dev);
+			return needtofree;
+		}
+	}
+
+	neh = uwb_rc_neh_add(rc, cmd, expected_type, expected_event, cb, arg);
+	if (IS_ERR(neh)) {
+		result = PTR_ERR(neh);
+		goto out;
+	}
+
+	result = rc->cmd(rc, cmd, cmd_size);
+	uwb_dev_unlock(&rc->uwb_dev);
+	if (result < 0)
+		uwb_rc_neh_rm(rc, neh);
+	else
+		uwb_rc_neh_arm(rc, neh);
+	uwb_rc_neh_put(neh);
+out:
+	if (needtofree == 1)
+		kfree(cmd);
+	return result < 0 ? result : 0;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_cmd_async);
+
+struct uwb_rc_cmd_done_params {
+	struct completion completion;
+	struct uwb_rceb *reply;
+	ssize_t reply_size;
+};
+
+static void uwb_rc_cmd_done(struct uwb_rc *rc, void *arg,
+			    struct uwb_rceb *reply, ssize_t reply_size)
+{
+	struct uwb_rc_cmd_done_params *p = (struct uwb_rc_cmd_done_params *)arg;
+
+	if (reply_size > 0) {
+		if (p->reply)
+			reply_size = min(p->reply_size, reply_size);
+		else
+			p->reply = kmalloc(reply_size, GFP_ATOMIC);
+
+		if (p->reply)
+			memcpy(p->reply, reply, reply_size);
+		else
+			reply_size = -ENOMEM;
+	}
+	p->reply_size = reply_size;
+	complete(&p->completion);
+}
+
+
+/**
+ * Generic function for issuing commands to the Radio Control Interface
+ *
+ * @rc:       UWB Radio Control descriptor
+ * @cmd_name: Name of the command being issued (for error messages)
+ * @cmd:      Pointer to rccb structure containing the command;
+ *            normally you embed this structure as the first member of
+ *            the full command structure.
+ * @cmd_size: Size of the whole command buffer pointed to by @cmd.
+ * @reply:    Pointer to where to store the reply
+ * @reply_size: @reply's size
+ * @expected_type: Expected type in the return event
+ * @expected_event: Expected event code in the return event
+ * @preply:   Here a pointer to where the event data is received will
+ *            be stored. Once done with the data, free with kfree().
+ *
+ * This function is generic; it works for commands that return a fixed
+ * and known size or for commands that return a variable amount of data.
+ *
+ * If a buffer is provided, that is used, although it could be chopped
+ * to the maximum size of the buffer. If the buffer is NULL, then one
+ * be allocated in *preply with the whole contents of the reply.
+ *
+ * @rc needs to be referenced
+ */
+static
+ssize_t __uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name,
+		     struct uwb_rccb *cmd, size_t cmd_size,
+		     struct uwb_rceb *reply, size_t reply_size,
+		     u8 expected_type, u16 expected_event,
+		     struct uwb_rceb **preply)
+{
+	ssize_t result = 0;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_rc_cmd_done_params params;
+
+	init_completion(&params.completion);
+	params.reply = reply;
+	params.reply_size = reply_size;
+
+	result = uwb_rc_cmd_async(rc, cmd_name, cmd, cmd_size,
+				  expected_type, expected_event,
+				  uwb_rc_cmd_done, &params);
+	if (result)
+		return result;
+
+	wait_for_completion(&params.completion);
+
+	if (preply)
+		*preply = params.reply;
+
+	if (params.reply_size < 0)
+		dev_err(dev, "%s: confirmation event 0x%02x/%04x/%02x "
+			"reception failed: %d\n", cmd_name,
+			expected_type, expected_event, cmd->bCommandContext,
+			(int)params.reply_size);
+	return params.reply_size;
+}
+
+
+/**
+ * Generic function for issuing commands to the Radio Control Interface
+ *
+ * @rc:       UWB Radio Control descriptor
+ * @cmd_name: Name of the command being issued (for error messages)
+ * @cmd:      Pointer to rccb structure containing the command;
+ *            normally you embed this structure as the first member of
+ *            the full command structure.
+ * @cmd_size: Size of the whole command buffer pointed to by @cmd.
+ * @reply:    Pointer to the beginning of the confirmation event
+ *            buffer. Normally bigger than an 'struct hwarc_rceb'.
+ *            You need to fill out reply->bEventType and reply->wEvent (in
+ *            cpu order) as the function will use them to verify the
+ *            confirmation event.
+ * @reply_size: Size of the reply buffer
+ *
+ * The function checks that the length returned in the reply is at
+ * least as big as @reply_size; if not, it will be deemed an error and
+ * -EIO returned.
+ *
+ * @rc needs to be referenced
+ */
+ssize_t uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name,
+		   struct uwb_rccb *cmd, size_t cmd_size,
+		   struct uwb_rceb *reply, size_t reply_size)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	ssize_t result;
+
+	result = __uwb_rc_cmd(rc, cmd_name,
+			      cmd, cmd_size, reply, reply_size,
+			      reply->bEventType, reply->wEvent, NULL);
+
+	if (result > 0 && result < reply_size) {
+		dev_err(dev, "%s: not enough data returned for decoding reply "
+			"(%zu bytes received vs at least %zu needed)\n",
+			cmd_name, result, reply_size);
+		result = -EIO;
+	}
+	return result;
+}
+EXPORT_SYMBOL_GPL(uwb_rc_cmd);
+
+
+/**
+ * Generic function for issuing commands to the Radio Control
+ * Interface that return an unknown amount of data
+ *
+ * @rc:       UWB Radio Control descriptor
+ * @cmd_name: Name of the command being issued (for error messages)
+ * @cmd:      Pointer to rccb structure containing the command;
+ *            normally you embed this structure as the first member of
+ *            the full command structure.
+ * @cmd_size: Size of the whole command buffer pointed to by @cmd.
+ * @expected_type: Expected type in the return event
+ * @expected_event: Expected event code in the return event
+ * @preply:   Here a pointer to where the event data is received will
+ *            be stored. Once done with the data, free with kfree().
+ *
+ * The function checks that the length returned in the reply is at
+ * least as big as a 'struct uwb_rceb *'; if not, it will be deemed an
+ * error and -EIO returned.
+ *
+ * @rc needs to be referenced
+ */
+ssize_t uwb_rc_vcmd(struct uwb_rc *rc, const char *cmd_name,
+		    struct uwb_rccb *cmd, size_t cmd_size,
+		    u8 expected_type, u16 expected_event,
+		    struct uwb_rceb **preply)
+{
+	return __uwb_rc_cmd(rc, cmd_name, cmd, cmd_size, NULL, 0,
+			    expected_type, expected_event, preply);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_vcmd);
+
+
+/**
+ * Reset a UWB Host Controller (and all radio settings)
+ *
+ * @rc:      Host Controller descriptor
+ * @returns: 0 if ok, < 0 errno code on error
+ *
+ * We put the command on kmalloc'ed memory as some arches cannot do
+ * USB from the stack. The reply event is copied from an stage buffer,
+ * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details.
+ */
+int uwb_rc_reset(struct uwb_rc *rc)
+{
+	int result = -ENOMEM;
+	struct uwb_rc_evt_confirm reply;
+	struct uwb_rccb *cmd;
+	size_t cmd_size = sizeof(*cmd);
+
+	mutex_lock(&rc->uwb_dev.mutex);
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		goto error_kzalloc;
+	cmd->bCommandType = UWB_RC_CET_GENERAL;
+	cmd->wCommand = cpu_to_le16(UWB_RC_CMD_RESET);
+	reply.rceb.bEventType = UWB_RC_CET_GENERAL;
+	reply.rceb.wEvent = UWB_RC_CMD_RESET;
+	result = uwb_rc_cmd(rc, "RESET", cmd, cmd_size,
+			    &reply.rceb, sizeof(reply));
+	if (result < 0)
+		goto error_cmd;
+	if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(&rc->uwb_dev.dev,
+			"RESET: command execution failed: %s (%d)\n",
+			uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
+		result = -EIO;
+	}
+error_cmd:
+	kfree(cmd);
+error_kzalloc:
+	mutex_unlock(&rc->uwb_dev.mutex);
+	return result;
+}
+
+int uwbd_msg_handle_reset(struct uwb_event *evt)
+{
+	struct uwb_rc *rc = evt->rc;
+	int ret;
+
+	/* Need to prevent the RC hardware module going away while in
+	   the rc->reset() call. */
+	if (!try_module_get(rc->owner))
+		return 0;
+
+	dev_info(&rc->uwb_dev.dev, "resetting radio controller\n");
+	ret = rc->reset(rc);
+	if (ret)
+		dev_err(&rc->uwb_dev.dev, "failed to reset hardware: %d\n", ret);
+
+	module_put(rc->owner);
+	return ret;
+}
+
+/**
+ * uwb_rc_reset_all - request a reset of the radio controller and PALs
+ * @rc: the radio controller of the hardware device to be reset.
+ *
+ * The full hardware reset of the radio controller and all the PALs
+ * will be scheduled.
+ */
+void uwb_rc_reset_all(struct uwb_rc *rc)
+{
+	struct uwb_event *evt;
+
+	evt = kzalloc(sizeof(struct uwb_event), GFP_ATOMIC);
+	if (unlikely(evt == NULL))
+		return;
+
+	evt->rc = __uwb_rc_get(rc);	/* will be put by uwbd's uwbd_event_handle() */
+	evt->ts_jiffies = jiffies;
+	evt->type = UWB_EVT_TYPE_MSG;
+	evt->message = UWB_EVT_MSG_RESET;
+
+	uwbd_event_queue(evt);
+}
+EXPORT_SYMBOL_GPL(uwb_rc_reset_all);
diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c
new file mode 100644
index 0000000..bae16204
--- /dev/null
+++ b/drivers/uwb/rsv.c
@@ -0,0 +1,680 @@
+/*
+ * UWB reservation management.
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/uwb.h>
+
+#include "uwb-internal.h"
+
+static void uwb_rsv_timer(unsigned long arg);
+
+static const char *rsv_states[] = {
+	[UWB_RSV_STATE_NONE]          = "none",
+	[UWB_RSV_STATE_O_INITIATED]   = "initiated",
+	[UWB_RSV_STATE_O_PENDING]     = "pending",
+	[UWB_RSV_STATE_O_MODIFIED]    = "modified",
+	[UWB_RSV_STATE_O_ESTABLISHED] = "established",
+	[UWB_RSV_STATE_T_ACCEPTED]    = "accepted",
+	[UWB_RSV_STATE_T_DENIED]      = "denied",
+	[UWB_RSV_STATE_T_PENDING]     = "pending",
+};
+
+static const char *rsv_types[] = {
+	[UWB_DRP_TYPE_ALIEN_BP] = "alien-bp",
+	[UWB_DRP_TYPE_HARD]     = "hard",
+	[UWB_DRP_TYPE_SOFT]     = "soft",
+	[UWB_DRP_TYPE_PRIVATE]  = "private",
+	[UWB_DRP_TYPE_PCA]      = "pca",
+};
+
+/**
+ * uwb_rsv_state_str - return a string for a reservation state
+ * @state: the reservation state.
+ */
+const char *uwb_rsv_state_str(enum uwb_rsv_state state)
+{
+	if (state < UWB_RSV_STATE_NONE || state >= UWB_RSV_STATE_LAST)
+		return "unknown";
+	return rsv_states[state];
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_state_str);
+
+/**
+ * uwb_rsv_type_str - return a string for a reservation type
+ * @type: the reservation type
+ */
+const char *uwb_rsv_type_str(enum uwb_drp_type type)
+{
+	if (type < UWB_DRP_TYPE_ALIEN_BP || type > UWB_DRP_TYPE_PCA)
+		return "invalid";
+	return rsv_types[type];
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_type_str);
+
+static void uwb_rsv_dump(struct uwb_rsv *rsv)
+{
+	struct device *dev = &rsv->rc->uwb_dev.dev;
+	struct uwb_dev_addr devaddr;
+	char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE];
+
+	uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr);
+	if (rsv->target.type == UWB_RSV_TARGET_DEV)
+		devaddr = rsv->target.dev->dev_addr;
+	else
+		devaddr = rsv->target.devaddr;
+	uwb_dev_addr_print(target, sizeof(target), &devaddr);
+
+	dev_dbg(dev, "rsv %s -> %s: %s\n", owner, target, uwb_rsv_state_str(rsv->state));
+}
+
+/*
+ * Get a free stream index for a reservation.
+ *
+ * If the target is a DevAddr (e.g., a WUSB cluster reservation) then
+ * the stream is allocated from a pool of per-RC stream indexes,
+ * otherwise a unique stream index for the target is selected.
+ */
+static int uwb_rsv_get_stream(struct uwb_rsv *rsv)
+{
+	struct uwb_rc *rc = rsv->rc;
+	unsigned long *streams_bm;
+	int stream;
+
+	switch (rsv->target.type) {
+	case UWB_RSV_TARGET_DEV:
+		streams_bm = rsv->target.dev->streams;
+		break;
+	case UWB_RSV_TARGET_DEVADDR:
+		streams_bm = rc->uwb_dev.streams;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	stream = find_first_zero_bit(streams_bm, UWB_NUM_STREAMS);
+	if (stream >= UWB_NUM_STREAMS)
+		return -EBUSY;
+
+	rsv->stream = stream;
+	set_bit(stream, streams_bm);
+
+	return 0;
+}
+
+static void uwb_rsv_put_stream(struct uwb_rsv *rsv)
+{
+	struct uwb_rc *rc = rsv->rc;
+	unsigned long *streams_bm;
+
+	switch (rsv->target.type) {
+	case UWB_RSV_TARGET_DEV:
+		streams_bm = rsv->target.dev->streams;
+		break;
+	case UWB_RSV_TARGET_DEVADDR:
+		streams_bm = rc->uwb_dev.streams;
+		break;
+	default:
+		return;
+	}
+
+	clear_bit(rsv->stream, streams_bm);
+}
+
+/*
+ * Generate a MAS allocation with a single row component.
+ */
+static void uwb_rsv_gen_alloc_row(struct uwb_mas_bm *mas,
+				  int first_mas, int mas_per_zone,
+				  int zs, int ze)
+{
+	struct uwb_mas_bm col;
+	int z;
+
+	bitmap_zero(mas->bm, UWB_NUM_MAS);
+	bitmap_zero(col.bm, UWB_NUM_MAS);
+	bitmap_fill(col.bm, mas_per_zone);
+	bitmap_shift_left(col.bm, col.bm, first_mas + zs * UWB_MAS_PER_ZONE, UWB_NUM_MAS);
+
+	for (z = zs; z <= ze; z++) {
+		bitmap_or(mas->bm, mas->bm, col.bm, UWB_NUM_MAS);
+		bitmap_shift_left(col.bm, col.bm, UWB_MAS_PER_ZONE, UWB_NUM_MAS);
+	}
+}
+
+/*
+ * Allocate some MAS for this reservation based on current local
+ * availability, the reservation parameters (max_mas, min_mas,
+ * sparsity), and the WiMedia rules for MAS allocations.
+ *
+ * Returns -EBUSY is insufficient free MAS are available.
+ *
+ * FIXME: to simplify this, only safe reservations with a single row
+ * component in zones 1 to 15 are tried (zone 0 is skipped to avoid
+ * problems with the MAS reserved for the BP).
+ *
+ * [ECMA-368] section B.2.
+ */
+static int uwb_rsv_alloc_mas(struct uwb_rsv *rsv)
+{
+	static const int safe_mas_in_row[UWB_NUM_ZONES] = {
+		8, 7, 6, 5, 4, 4, 4, 4, 4, 4, 4, 4, 4, 3, 2, 1,
+	};
+	int n, r;
+	struct uwb_mas_bm mas;
+	bool found = false;
+
+	/*
+	 * Search all valid safe allocations until either: too few MAS
+	 * are available; or the smallest allocation with sufficient
+	 * MAS is found.
+	 *
+	 * The top of the zones are preferred, so space for larger
+	 * allocations is available in the bottom of the zone (e.g., a
+	 * 15 MAS allocation should start in row 14 leaving space for
+	 * a 120 MAS allocation at row 0).
+	 */
+	for (n = safe_mas_in_row[0]; n >= 1; n--) {
+		int num_mas;
+
+		num_mas = n * (UWB_NUM_ZONES - 1);
+		if (num_mas < rsv->min_mas)
+			break;
+		if (found && num_mas < rsv->max_mas)
+			break;
+
+		for (r = UWB_MAS_PER_ZONE-1;  r >= 0; r--) {
+			if (safe_mas_in_row[r] < n)
+				continue;
+			uwb_rsv_gen_alloc_row(&mas, r, n, 1, UWB_NUM_ZONES);
+			if (uwb_drp_avail_reserve_pending(rsv->rc, &mas) == 0) {
+				found = true;
+				break;
+			}
+		}
+	}
+
+	if (!found)
+		return -EBUSY;
+
+	bitmap_copy(rsv->mas.bm, mas.bm, UWB_NUM_MAS);
+	return 0;
+}
+
+static void uwb_rsv_stroke_timer(struct uwb_rsv *rsv)
+{
+	int sframes = UWB_MAX_LOST_BEACONS;
+
+	/*
+	 * Multicast reservations can become established within 1
+	 * super frame and should not be terminated if no response is
+	 * received.
+	 */
+	if (rsv->is_multicast) {
+		if (rsv->state == UWB_RSV_STATE_O_INITIATED)
+			sframes = 1;
+		if (rsv->state == UWB_RSV_STATE_O_ESTABLISHED)
+			sframes = 0;
+	}
+
+	rsv->expired = false;
+	if (sframes > 0) {
+		/*
+		 * Add an additional 2 superframes to account for the
+		 * time to send the SET DRP IE command.
+		 */
+		unsigned timeout_us = (sframes + 2) * UWB_SUPERFRAME_LENGTH_US;
+		mod_timer(&rsv->timer, jiffies + usecs_to_jiffies(timeout_us));
+	} else
+		del_timer(&rsv->timer);
+}
+
+/*
+ * Update a reservations state, and schedule an update of the
+ * transmitted DRP IEs.
+ */
+static void uwb_rsv_state_update(struct uwb_rsv *rsv,
+				 enum uwb_rsv_state new_state)
+{
+	rsv->state = new_state;
+	rsv->ie_valid = false;
+
+	uwb_rsv_dump(rsv);
+
+	uwb_rsv_stroke_timer(rsv);
+	uwb_rsv_sched_update(rsv->rc);
+}
+
+static void uwb_rsv_callback(struct uwb_rsv *rsv)
+{
+	if (rsv->callback)
+		rsv->callback(rsv);
+}
+
+void uwb_rsv_set_state(struct uwb_rsv *rsv, enum uwb_rsv_state new_state)
+{
+	if (rsv->state == new_state) {
+		switch (rsv->state) {
+		case UWB_RSV_STATE_O_ESTABLISHED:
+		case UWB_RSV_STATE_T_ACCEPTED:
+		case UWB_RSV_STATE_NONE:
+			uwb_rsv_stroke_timer(rsv);
+			break;
+		default:
+			/* Expecting a state transition so leave timer
+			   as-is. */
+			break;
+		}
+		return;
+	}
+
+	switch (new_state) {
+	case UWB_RSV_STATE_NONE:
+		uwb_drp_avail_release(rsv->rc, &rsv->mas);
+		uwb_rsv_put_stream(rsv);
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_NONE);
+		uwb_rsv_callback(rsv);
+		break;
+	case UWB_RSV_STATE_O_INITIATED:
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_INITIATED);
+		break;
+	case UWB_RSV_STATE_O_PENDING:
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_PENDING);
+		break;
+	case UWB_RSV_STATE_O_ESTABLISHED:
+		uwb_drp_avail_reserve(rsv->rc, &rsv->mas);
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_ESTABLISHED);
+		uwb_rsv_callback(rsv);
+		break;
+	case UWB_RSV_STATE_T_ACCEPTED:
+		uwb_drp_avail_reserve(rsv->rc, &rsv->mas);
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_ACCEPTED);
+		uwb_rsv_callback(rsv);
+		break;
+	case UWB_RSV_STATE_T_DENIED:
+		uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_DENIED);
+		break;
+	default:
+		dev_err(&rsv->rc->uwb_dev.dev, "unhandled state: %s (%d)\n",
+			uwb_rsv_state_str(new_state), new_state);
+	}
+}
+
+static struct uwb_rsv *uwb_rsv_alloc(struct uwb_rc *rc)
+{
+	struct uwb_rsv *rsv;
+
+	rsv = kzalloc(sizeof(struct uwb_rsv), GFP_KERNEL);
+	if (!rsv)
+		return NULL;
+
+	INIT_LIST_HEAD(&rsv->rc_node);
+	INIT_LIST_HEAD(&rsv->pal_node);
+	init_timer(&rsv->timer);
+	rsv->timer.function = uwb_rsv_timer;
+	rsv->timer.data     = (unsigned long)rsv;
+
+	rsv->rc = rc;
+
+	return rsv;
+}
+
+static void uwb_rsv_free(struct uwb_rsv *rsv)
+{
+	uwb_dev_put(rsv->owner);
+	if (rsv->target.type == UWB_RSV_TARGET_DEV)
+		uwb_dev_put(rsv->target.dev);
+	kfree(rsv);
+}
+
+/**
+ * uwb_rsv_create - allocate and initialize a UWB reservation structure
+ * @rc: the radio controller
+ * @cb: callback to use when the reservation completes or terminates
+ * @pal_priv: data private to the PAL to be passed in the callback
+ *
+ * The callback is called when the state of the reservation changes from:
+ *
+ *   - pending to accepted
+ *   - pending to denined
+ *   - accepted to terminated
+ *   - pending to terminated
+ */
+struct uwb_rsv *uwb_rsv_create(struct uwb_rc *rc, uwb_rsv_cb_f cb, void *pal_priv)
+{
+	struct uwb_rsv *rsv;
+
+	rsv = uwb_rsv_alloc(rc);
+	if (!rsv)
+		return NULL;
+
+	rsv->callback = cb;
+	rsv->pal_priv = pal_priv;
+
+	return rsv;
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_create);
+
+void uwb_rsv_remove(struct uwb_rsv *rsv)
+{
+	if (rsv->state != UWB_RSV_STATE_NONE)
+		uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+	del_timer_sync(&rsv->timer);
+	list_del(&rsv->rc_node);
+	uwb_rsv_free(rsv);
+}
+
+/**
+ * uwb_rsv_destroy - free a UWB reservation structure
+ * @rsv: the reservation to free
+ *
+ * The reservation will be terminated if it is pending or established.
+ */
+void uwb_rsv_destroy(struct uwb_rsv *rsv)
+{
+	struct uwb_rc *rc = rsv->rc;
+
+	mutex_lock(&rc->rsvs_mutex);
+	uwb_rsv_remove(rsv);
+	mutex_unlock(&rc->rsvs_mutex);
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_destroy);
+
+/**
+ * usb_rsv_establish - start a reservation establishment
+ * @rsv: the reservation
+ *
+ * The PAL should fill in @rsv's owner, target, type, max_mas,
+ * min_mas, sparsity and is_multicast fields.  If the target is a
+ * uwb_dev it must be referenced.
+ *
+ * The reservation's callback will be called when the reservation is
+ * accepted, denied or times out.
+ */
+int uwb_rsv_establish(struct uwb_rsv *rsv)
+{
+	struct uwb_rc *rc = rsv->rc;
+	int ret;
+
+	mutex_lock(&rc->rsvs_mutex);
+
+	ret = uwb_rsv_get_stream(rsv);
+	if (ret)
+		goto out;
+
+	ret = uwb_rsv_alloc_mas(rsv);
+	if (ret) {
+		uwb_rsv_put_stream(rsv);
+		goto out;
+	}
+
+	list_add_tail(&rsv->rc_node, &rc->reservations);
+	rsv->owner = &rc->uwb_dev;
+	uwb_dev_get(rsv->owner);
+	uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_INITIATED);
+out:
+	mutex_unlock(&rc->rsvs_mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_establish);
+
+/**
+ * uwb_rsv_modify - modify an already established reservation
+ * @rsv: the reservation to modify
+ * @max_mas: new maximum MAS to reserve
+ * @min_mas: new minimum MAS to reserve
+ * @sparsity: new sparsity to use
+ *
+ * FIXME: implement this once there are PALs that use it.
+ */
+int uwb_rsv_modify(struct uwb_rsv *rsv, int max_mas, int min_mas, int sparsity)
+{
+	return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_modify);
+
+/**
+ * uwb_rsv_terminate - terminate an established reservation
+ * @rsv: the reservation to terminate
+ *
+ * A reservation is terminated by removing the DRP IE from the beacon,
+ * the other end will consider the reservation to be terminated when
+ * it does not see the DRP IE for at least mMaxLostBeacons.
+ *
+ * If applicable, the reference to the target uwb_dev will be released.
+ */
+void uwb_rsv_terminate(struct uwb_rsv *rsv)
+{
+	struct uwb_rc *rc = rsv->rc;
+
+	mutex_lock(&rc->rsvs_mutex);
+
+	uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
+
+	mutex_unlock(&rc->rsvs_mutex);
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_terminate);
+
+/**
+ * uwb_rsv_accept - accept a new reservation from a peer
+ * @rsv:      the reservation
+ * @cb:       call back for reservation changes
+ * @pal_priv: data to be passed in the above call back
+ *
+ * Reservation requests from peers are denied unless a PAL accepts it
+ * by calling this function.
+ */
+void uwb_rsv_accept(struct uwb_rsv *rsv, uwb_rsv_cb_f cb, void *pal_priv)
+{
+	rsv->callback = cb;
+	rsv->pal_priv = pal_priv;
+	rsv->state    = UWB_RSV_STATE_T_ACCEPTED;
+}
+EXPORT_SYMBOL_GPL(uwb_rsv_accept);
+
+/*
+ * Is a received DRP IE for this reservation?
+ */
+static bool uwb_rsv_match(struct uwb_rsv *rsv, struct uwb_dev *src,
+			  struct uwb_ie_drp *drp_ie)
+{
+	struct uwb_dev_addr *rsv_src;
+	int stream;
+
+	stream = uwb_ie_drp_stream_index(drp_ie);
+
+	if (rsv->stream != stream)
+		return false;
+
+	switch (rsv->target.type) {
+	case UWB_RSV_TARGET_DEVADDR:
+		return rsv->stream == stream;
+	case UWB_RSV_TARGET_DEV:
+		if (uwb_ie_drp_owner(drp_ie))
+			rsv_src = &rsv->owner->dev_addr;
+		else
+			rsv_src = &rsv->target.dev->dev_addr;
+		return uwb_dev_addr_cmp(&src->dev_addr, rsv_src) == 0;
+	}
+	return false;
+}
+
+static struct uwb_rsv *uwb_rsv_new_target(struct uwb_rc *rc,
+					  struct uwb_dev *src,
+					  struct uwb_ie_drp *drp_ie)
+{
+	struct uwb_rsv *rsv;
+	struct uwb_pal *pal;
+	enum uwb_rsv_state state;
+
+	rsv = uwb_rsv_alloc(rc);
+	if (!rsv)
+		return NULL;
+
+	rsv->rc          = rc;
+	rsv->owner       = src;
+	uwb_dev_get(rsv->owner);
+	rsv->target.type = UWB_RSV_TARGET_DEV;
+	rsv->target.dev  = &rc->uwb_dev;
+	rsv->type        = uwb_ie_drp_type(drp_ie);
+	rsv->stream      = uwb_ie_drp_stream_index(drp_ie);
+	set_bit(rsv->stream, rsv->owner->streams);
+	uwb_drp_ie_to_bm(&rsv->mas, drp_ie);
+
+	/*
+	 * See if any PALs are interested in this reservation. If not,
+	 * deny the request.
+	 */
+	rsv->state = UWB_RSV_STATE_T_DENIED;
+	spin_lock(&rc->pal_lock);
+	list_for_each_entry(pal, &rc->pals, node) {
+		if (pal->new_rsv)
+			pal->new_rsv(rsv);
+		if (rsv->state == UWB_RSV_STATE_T_ACCEPTED)
+			break;
+	}
+	spin_unlock(&rc->pal_lock);
+
+	list_add_tail(&rsv->rc_node, &rc->reservations);
+	state = rsv->state;
+	rsv->state = UWB_RSV_STATE_NONE;
+	uwb_rsv_set_state(rsv, state);
+
+	return rsv;
+}
+
+/**
+ * uwb_rsv_find - find a reservation for a received DRP IE.
+ * @rc: the radio controller
+ * @src: source of the DRP IE
+ * @drp_ie: the DRP IE
+ *
+ * If the reservation cannot be found and the DRP IE is from a peer
+ * attempting to establish a new reservation, create a new reservation
+ * and add it to the list.
+ */
+struct uwb_rsv *uwb_rsv_find(struct uwb_rc *rc, struct uwb_dev *src,
+			     struct uwb_ie_drp *drp_ie)
+{
+	struct uwb_rsv *rsv;
+
+	list_for_each_entry(rsv, &rc->reservations, rc_node) {
+		if (uwb_rsv_match(rsv, src, drp_ie))
+			return rsv;
+	}
+
+	if (uwb_ie_drp_owner(drp_ie))
+		return uwb_rsv_new_target(rc, src, drp_ie);
+
+	return NULL;
+}
+
+/*
+ * Go through all the reservations and check for timeouts and (if
+ * necessary) update their DRP IEs.
+ *
+ * FIXME: look at building the SET_DRP_IE command here rather than
+ * having to rescan the list in uwb_rc_send_all_drp_ie().
+ */
+static bool uwb_rsv_update_all(struct uwb_rc *rc)
+{
+	struct uwb_rsv *rsv, *t;
+	bool ie_updated = false;
+
+	list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
+		if (rsv->expired)
+			uwb_drp_handle_timeout(rsv);
+		if (!rsv->ie_valid) {
+			uwb_drp_ie_update(rsv);
+			ie_updated = true;
+		}
+	}
+
+	return ie_updated;
+}
+
+void uwb_rsv_sched_update(struct uwb_rc *rc)
+{
+	queue_work(rc->rsv_workq, &rc->rsv_update_work);
+}
+
+/*
+ * Update DRP IEs and, if necessary, the DRP Availability IE and send
+ * the updated IEs to the radio controller.
+ */
+static void uwb_rsv_update_work(struct work_struct *work)
+{
+	struct uwb_rc *rc = container_of(work, struct uwb_rc, rsv_update_work);
+	bool ie_updated;
+
+	mutex_lock(&rc->rsvs_mutex);
+
+	ie_updated = uwb_rsv_update_all(rc);
+
+	if (!rc->drp_avail.ie_valid) {
+		uwb_drp_avail_ie_update(rc);
+		ie_updated = true;
+	}
+
+	if (ie_updated)
+		uwb_rc_send_all_drp_ie(rc);
+
+	mutex_unlock(&rc->rsvs_mutex);
+}
+
+static void uwb_rsv_timer(unsigned long arg)
+{
+	struct uwb_rsv *rsv = (struct uwb_rsv *)arg;
+
+	rsv->expired = true;
+	uwb_rsv_sched_update(rsv->rc);
+}
+
+void uwb_rsv_init(struct uwb_rc *rc)
+{
+	INIT_LIST_HEAD(&rc->reservations);
+	mutex_init(&rc->rsvs_mutex);
+	INIT_WORK(&rc->rsv_update_work, uwb_rsv_update_work);
+
+	bitmap_complement(rc->uwb_dev.streams, rc->uwb_dev.streams, UWB_NUM_STREAMS);
+}
+
+int uwb_rsv_setup(struct uwb_rc *rc)
+{
+	char name[16];
+
+	snprintf(name, sizeof(name), "%s_rsvd", dev_name(&rc->uwb_dev.dev));
+	rc->rsv_workq = create_singlethread_workqueue(name);
+	if (rc->rsv_workq == NULL)
+		return -ENOMEM;
+
+	return 0;
+}
+
+void uwb_rsv_cleanup(struct uwb_rc *rc)
+{
+	struct uwb_rsv *rsv, *t;
+
+	mutex_lock(&rc->rsvs_mutex);
+	list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
+		uwb_rsv_remove(rsv);
+	}
+	mutex_unlock(&rc->rsvs_mutex);
+
+	cancel_work_sync(&rc->rsv_update_work);
+	destroy_workqueue(rc->rsv_workq);
+}
diff --git a/drivers/uwb/scan.c b/drivers/uwb/scan.c
new file mode 100644
index 0000000..2d27074
--- /dev/null
+++ b/drivers/uwb/scan.c
@@ -0,0 +1,133 @@
+/*
+ * Ultra Wide Band
+ * Scanning management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ *
+ * FIXME: docs
+ * FIXME: there are issues here on how BEACON and SCAN on USB RCI deal
+ *        with each other. Currently seems that START_BEACON while
+ *        SCAN_ONLY will cancel the scan, so we need to update the
+ *        state here. Clarification request sent by email on
+ *        10/05/2005.
+ *        10/28/2005 No clear answer heard--maybe we'll hack the API
+ *                   so that when we start beaconing, if the HC is
+ *                   scanning in a mode not compatible with beaconing
+ *                   we just fail.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include "uwb-internal.h"
+
+
+/**
+ * Start/stop scanning in a radio controller
+ *
+ * @rc:      UWB Radio Controlller
+ * @channel: Channel to scan; encodings in WUSB1.0[Table 5.12]
+ * @type:    Type of scanning to do.
+ * @bpst_offset: value at which to start scanning (if type ==
+ *                UWB_SCAN_ONLY_STARTTIME)
+ * @returns: 0 if ok, < 0 errno code on error
+ *
+ * We put the command on kmalloc'ed memory as some arches cannot do
+ * USB from the stack. The reply event is copied from an stage buffer,
+ * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details.
+ */
+int uwb_rc_scan(struct uwb_rc *rc,
+		unsigned channel, enum uwb_scan_type type,
+		unsigned bpst_offset)
+{
+	int result;
+	struct uwb_rc_cmd_scan *cmd;
+	struct uwb_rc_evt_confirm reply;
+
+	result = -ENOMEM;
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		goto error_kzalloc;
+	mutex_lock(&rc->uwb_dev.mutex);
+	cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
+	cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SCAN);
+	cmd->bChannelNumber = channel;
+	cmd->bScanState = type;
+	cmd->wStartTime = cpu_to_le16(bpst_offset);
+	reply.rceb.bEventType = UWB_RC_CET_GENERAL;
+	reply.rceb.wEvent = UWB_RC_CMD_SCAN;
+	result = uwb_rc_cmd(rc, "SCAN", &cmd->rccb, sizeof(*cmd),
+			    &reply.rceb, sizeof(reply));
+	if (result < 0)
+		goto error_cmd;
+	if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
+		dev_err(&rc->uwb_dev.dev,
+			"SCAN: command execution failed: %s (%d)\n",
+			uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
+		result = -EIO;
+		goto error_cmd;
+	}
+	rc->scanning = channel;
+	rc->scan_type = type;
+error_cmd:
+	mutex_unlock(&rc->uwb_dev.mutex);
+	kfree(cmd);
+error_kzalloc:
+	return result;
+}
+
+/*
+ * Print scanning state
+ */
+static ssize_t uwb_rc_scan_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_rc *rc = uwb_dev->rc;
+	ssize_t result;
+
+	mutex_lock(&rc->uwb_dev.mutex);
+	result = sprintf(buf, "%d %d\n", rc->scanning, rc->scan_type);
+	mutex_unlock(&rc->uwb_dev.mutex);
+	return result;
+}
+
+/*
+ *
+ */
+static ssize_t uwb_rc_scan_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t size)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_rc *rc = uwb_dev->rc;
+	unsigned channel;
+	unsigned type;
+	unsigned bpst_offset = 0;
+	ssize_t result = -EINVAL;
+
+	result = sscanf(buf, "%u %u %u\n", &channel, &type, &bpst_offset);
+	if (result >= 2 && type < UWB_SCAN_TOP)
+		result = uwb_rc_scan(rc, channel, type, bpst_offset);
+
+	return result < 0 ? result : size;
+}
+
+/** Radio Control sysfs interface (declaration) */
+DEVICE_ATTR(scan, S_IRUGO | S_IWUSR, uwb_rc_scan_show, uwb_rc_scan_store);
diff --git a/drivers/uwb/umc-bus.c b/drivers/uwb/umc-bus.c
new file mode 100644
index 0000000..2d8d62d
--- /dev/null
+++ b/drivers/uwb/umc-bus.c
@@ -0,0 +1,218 @@
+/*
+ * Bus for UWB Multi-interface Controller capabilities.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This file is released under the GNU GPL v2.
+ */
+#include <linux/kernel.h>
+#include <linux/sysfs.h>
+#include <linux/workqueue.h>
+#include <linux/uwb/umc.h>
+#include <linux/pci.h>
+
+static int umc_bus_unbind_helper(struct device *dev, void *data)
+{
+	struct device *parent = data;
+
+	if (dev->parent == parent && dev->driver)
+		device_release_driver(dev);
+	return 0;
+}
+
+/**
+ * umc_controller_reset - reset the whole UMC controller
+ * @umc: the UMC device for the radio controller.
+ *
+ * Drivers will be unbound from all UMC devices belonging to the
+ * controller and then the radio controller will be rebound.  The
+ * radio controller is expected to do a full hardware reset when it is
+ * probed.
+ *
+ * If this is called while a probe() or remove() is in progress it
+ * will return -EAGAIN and not perform the reset.
+ */
+int umc_controller_reset(struct umc_dev *umc)
+{
+	struct device *parent = umc->dev.parent;
+	int ret;
+
+	if (down_trylock(&parent->sem))
+		return -EAGAIN;
+	bus_for_each_dev(&umc_bus_type, NULL, parent, umc_bus_unbind_helper);
+	ret = device_attach(&umc->dev);
+	if (ret == 1)
+		ret = 0;
+	up(&parent->sem);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(umc_controller_reset);
+
+/**
+ * umc_match_pci_id - match a UMC driver to a UMC device's parent PCI device.
+ * @umc_drv: umc driver with match_data pointing to a zero-terminated
+ * table of pci_device_id's.
+ * @umc: umc device whose parent is to be matched.
+ */
+int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc)
+{
+	const struct pci_device_id *id_table = umc_drv->match_data;
+	struct pci_dev *pci;
+
+	if (umc->dev.parent->bus != &pci_bus_type)
+		return 0;
+
+	pci = to_pci_dev(umc->dev.parent);
+	return pci_match_id(id_table, pci) != NULL;
+}
+EXPORT_SYMBOL_GPL(umc_match_pci_id);
+
+static int umc_bus_rescan_helper(struct device *dev, void *data)
+{
+	int ret = 0;
+
+	if (!dev->driver)
+		ret = device_attach(dev);
+
+	return ret < 0 ? ret : 0;
+}
+
+static void umc_bus_rescan(void)
+{
+	int err;
+
+	/*
+	 * We can't use bus_rescan_devices() here as it deadlocks when
+	 * it tries to retake the dev->parent semaphore.
+	 */
+	err = bus_for_each_dev(&umc_bus_type, NULL, NULL, umc_bus_rescan_helper);
+	if (err < 0)
+		printk(KERN_WARNING "%s: rescan of bus failed: %d\n",
+		       KBUILD_MODNAME, err);
+}
+
+static int umc_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct umc_dev *umc = to_umc_dev(dev);
+	struct umc_driver *umc_driver = to_umc_driver(drv);
+
+	if (umc->cap_id == umc_driver->cap_id) {
+		if (umc_driver->match)
+			return umc_driver->match(umc_driver, umc);
+		else
+			return 1;
+	}
+	return 0;
+}
+
+static int umc_device_probe(struct device *dev)
+{
+	struct umc_dev *umc;
+	struct umc_driver *umc_driver;
+	int err;
+
+	umc_driver = to_umc_driver(dev->driver);
+	umc = to_umc_dev(dev);
+
+	get_device(dev);
+	err = umc_driver->probe(umc);
+	if (err)
+		put_device(dev);
+	else
+		umc_bus_rescan();
+
+	return err;
+}
+
+static int umc_device_remove(struct device *dev)
+{
+	struct umc_dev *umc;
+	struct umc_driver *umc_driver;
+
+	umc_driver = to_umc_driver(dev->driver);
+	umc = to_umc_dev(dev);
+
+	umc_driver->remove(umc);
+	put_device(dev);
+	return 0;
+}
+
+static int umc_device_suspend(struct device *dev, pm_message_t state)
+{
+	struct umc_dev *umc;
+	struct umc_driver *umc_driver;
+	int err = 0;
+
+	umc = to_umc_dev(dev);
+
+	if (dev->driver) {
+		umc_driver = to_umc_driver(dev->driver);
+		if (umc_driver->suspend)
+			err = umc_driver->suspend(umc, state);
+	}
+	return err;
+}
+
+static int umc_device_resume(struct device *dev)
+{
+	struct umc_dev *umc;
+	struct umc_driver *umc_driver;
+	int err = 0;
+
+	umc = to_umc_dev(dev);
+
+	if (dev->driver) {
+		umc_driver = to_umc_driver(dev->driver);
+		if (umc_driver->resume)
+			err = umc_driver->resume(umc);
+	}
+	return err;
+}
+
+static ssize_t capability_id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct umc_dev *umc = to_umc_dev(dev);
+
+	return sprintf(buf, "0x%02x\n", umc->cap_id);
+}
+
+static ssize_t version_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct umc_dev *umc = to_umc_dev(dev);
+
+	return sprintf(buf, "0x%04x\n", umc->version);
+}
+
+static struct device_attribute umc_dev_attrs[] = {
+	__ATTR_RO(capability_id),
+	__ATTR_RO(version),
+	__ATTR_NULL,
+};
+
+struct bus_type umc_bus_type = {
+	.name		= "umc",
+	.match		= umc_bus_match,
+	.probe		= umc_device_probe,
+	.remove		= umc_device_remove,
+	.suspend        = umc_device_suspend,
+	.resume         = umc_device_resume,
+	.dev_attrs	= umc_dev_attrs,
+};
+EXPORT_SYMBOL_GPL(umc_bus_type);
+
+static int __init umc_bus_init(void)
+{
+	return bus_register(&umc_bus_type);
+}
+module_init(umc_bus_init);
+
+static void __exit umc_bus_exit(void)
+{
+	bus_unregister(&umc_bus_type);
+}
+module_exit(umc_bus_exit);
+
+MODULE_DESCRIPTION("UWB Multi-interface Controller capability bus");
+MODULE_AUTHOR("Cambridge Silicon Radio Ltd.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/umc-dev.c b/drivers/uwb/umc-dev.c
new file mode 100644
index 0000000..aa44e1c
--- /dev/null
+++ b/drivers/uwb/umc-dev.c
@@ -0,0 +1,104 @@
+/*
+ * UWB Multi-interface Controller device management.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This file is released under the GNU GPL v2.
+ */
+#include <linux/kernel.h>
+#include <linux/uwb/umc.h>
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+static void umc_device_release(struct device *dev)
+{
+	struct umc_dev *umc = to_umc_dev(dev);
+
+	kfree(umc);
+}
+
+/**
+ * umc_device_create - allocate a child UMC device
+ * @parent: parent of the new UMC device.
+ * @n:      index of the new device.
+ *
+ * The new UMC device will have a bus ID of the parent with '-n'
+ * appended.
+ */
+struct umc_dev *umc_device_create(struct device *parent, int n)
+{
+	struct umc_dev *umc;
+
+	umc = kzalloc(sizeof(struct umc_dev), GFP_KERNEL);
+	if (umc) {
+		snprintf(umc->dev.bus_id, sizeof(umc->dev.bus_id), "%s-%d",
+			 parent->bus_id, n);
+		umc->dev.parent  = parent;
+		umc->dev.bus     = &umc_bus_type;
+		umc->dev.release = umc_device_release;
+
+		umc->dev.dma_mask = parent->dma_mask;
+	}
+	return umc;
+}
+EXPORT_SYMBOL_GPL(umc_device_create);
+
+/**
+ * umc_device_register - register a UMC device
+ * @umc: pointer to the UMC device
+ *
+ * The memory resource for the UMC device is acquired and the device
+ * registered with the system.
+ */
+int umc_device_register(struct umc_dev *umc)
+{
+	int err;
+
+	d_fnstart(3, &umc->dev, "(umc_dev %p)\n", umc);
+
+	err = request_resource(umc->resource.parent, &umc->resource);
+	if (err < 0) {
+		dev_err(&umc->dev, "can't allocate resource range "
+			"%016Lx to %016Lx: %d\n",
+			(unsigned long long)umc->resource.start,
+			(unsigned long long)umc->resource.end,
+			err);
+		goto error_request_resource;
+	}
+
+	err = device_register(&umc->dev);
+	if (err < 0)
+		goto error_device_register;
+	d_fnend(3, &umc->dev, "(umc_dev %p) = 0\n", umc);
+	return 0;
+
+error_device_register:
+	release_resource(&umc->resource);
+error_request_resource:
+	d_fnend(3, &umc->dev, "(umc_dev %p) = %d\n", umc, err);
+	return err;
+}
+EXPORT_SYMBOL_GPL(umc_device_register);
+
+/**
+ * umc_device_unregister - unregister a UMC device
+ * @umc: pointer to the UMC device
+ *
+ * First we unregister the device, make sure the driver can do it's
+ * resource release thing and then we try to release any left over
+ * resources. We take a ref to the device, to make sure it doesn't
+ * dissapear under our feet.
+ */
+void umc_device_unregister(struct umc_dev *umc)
+{
+	struct device *dev;
+	if (!umc)
+		return;
+	dev = get_device(&umc->dev);
+	d_fnstart(3, dev, "(umc_dev %p)\n", umc);
+	device_unregister(&umc->dev);
+	release_resource(&umc->resource);
+	d_fnend(3, dev, "(umc_dev %p) = void\n", umc);
+	put_device(dev);
+}
+EXPORT_SYMBOL_GPL(umc_device_unregister);
diff --git a/drivers/uwb/umc-drv.c b/drivers/uwb/umc-drv.c
new file mode 100644
index 0000000..367b5eb8
--- /dev/null
+++ b/drivers/uwb/umc-drv.c
@@ -0,0 +1,31 @@
+/*
+ * UWB Multi-interface Controller driver management.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This file is released under the GNU GPL v2.
+ */
+#include <linux/kernel.h>
+#include <linux/uwb/umc.h>
+
+int __umc_driver_register(struct umc_driver *umc_drv, struct module *module,
+			  const char *mod_name)
+{
+	umc_drv->driver.name     = umc_drv->name;
+	umc_drv->driver.owner    = module;
+	umc_drv->driver.mod_name = mod_name;
+	umc_drv->driver.bus      = &umc_bus_type;
+
+	return driver_register(&umc_drv->driver);
+}
+EXPORT_SYMBOL_GPL(__umc_driver_register);
+
+/**
+ * umc_driver_register - unregister a UMC capabiltity driver.
+ * @umc_drv:  pointer to the driver.
+ */
+void umc_driver_unregister(struct umc_driver *umc_drv)
+{
+	driver_unregister(&umc_drv->driver);
+}
+EXPORT_SYMBOL_GPL(umc_driver_unregister);
diff --git a/drivers/uwb/uwb-debug.c b/drivers/uwb/uwb-debug.c
new file mode 100644
index 0000000..6d232c3
--- /dev/null
+++ b/drivers/uwb/uwb-debug.c
@@ -0,0 +1,367 @@
+/*
+ * Ultra Wide Band
+ * Debug support
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: doc
+ */
+
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/notifier.h>
+#include <linux/device.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/seq_file.h>
+
+#include <linux/uwb/debug-cmd.h>
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+#include "uwb-internal.h"
+
+void dump_bytes(struct device *dev, const void *_buf, size_t rsize)
+{
+	const char *buf = _buf;
+	char line[32];
+	size_t offset = 0;
+	int cnt, cnt2;
+	for (cnt = 0; cnt < rsize; cnt += 8) {
+		size_t rtop = rsize - cnt < 8 ? rsize - cnt : 8;
+		for (offset = cnt2 = 0; cnt2 < rtop; cnt2++) {
+			offset += scnprintf(line + offset, sizeof(line) - offset,
+					    "%02x ", buf[cnt + cnt2] & 0xff);
+		}
+		if (dev)
+			dev_info(dev, "%s\n", line);
+		else
+			printk(KERN_INFO "%s\n", line);
+	}
+}
+EXPORT_SYMBOL_GPL(dump_bytes);
+
+/*
+ * Debug interface
+ *
+ * Per radio controller debugfs files (in uwb/uwbN/):
+ *
+ * command: Flexible command interface (see <linux/uwb/debug-cmd.h>).
+ *
+ * reservations: information on reservations.
+ *
+ * accept: Set to true (Y or 1) to accept reservation requests from
+ * peers.
+ *
+ * drp_avail: DRP availability information.
+ */
+
+struct uwb_dbg {
+	struct uwb_pal pal;
+
+	u32 accept;
+	struct list_head rsvs;
+
+	struct dentry *root_d;
+	struct dentry *command_f;
+	struct dentry *reservations_f;
+	struct dentry *accept_f;
+	struct dentry *drp_avail_f;
+};
+
+static struct dentry *root_dir;
+
+static void uwb_dbg_rsv_cb(struct uwb_rsv *rsv)
+{
+	struct uwb_rc *rc = rsv->rc;
+	struct device *dev = &rc->uwb_dev.dev;
+	struct uwb_dev_addr devaddr;
+	char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE];
+
+	uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr);
+	if (rsv->target.type == UWB_RSV_TARGET_DEV)
+		devaddr = rsv->target.dev->dev_addr;
+	else
+		devaddr = rsv->target.devaddr;
+	uwb_dev_addr_print(target, sizeof(target), &devaddr);
+
+	dev_dbg(dev, "debug: rsv %s -> %s: %s\n",
+		owner, target, uwb_rsv_state_str(rsv->state));
+}
+
+static int cmd_rsv_establish(struct uwb_rc *rc,
+			     struct uwb_dbg_cmd_rsv_establish *cmd)
+{
+	struct uwb_mac_addr macaddr;
+	struct uwb_rsv *rsv;
+	struct uwb_dev *target;
+	int ret;
+
+	memcpy(&macaddr, cmd->target, sizeof(macaddr));
+	target = uwb_dev_get_by_macaddr(rc, &macaddr);
+	if (target == NULL)
+		return -ENODEV;
+
+	rsv = uwb_rsv_create(rc, uwb_dbg_rsv_cb, NULL);
+	if (rsv == NULL) {
+		uwb_dev_put(target);
+		return -ENOMEM;
+	}
+
+	rsv->owner       = &rc->uwb_dev;
+	rsv->target.type = UWB_RSV_TARGET_DEV;
+	rsv->target.dev  = target;
+	rsv->type        = cmd->type;
+	rsv->max_mas     = cmd->max_mas;
+	rsv->min_mas     = cmd->min_mas;
+	rsv->sparsity    = cmd->sparsity;
+
+	ret = uwb_rsv_establish(rsv);
+	if (ret)
+		uwb_rsv_destroy(rsv);
+	else
+		list_add_tail(&rsv->pal_node, &rc->dbg->rsvs);
+
+	return ret;
+}
+
+static int cmd_rsv_terminate(struct uwb_rc *rc,
+			     struct uwb_dbg_cmd_rsv_terminate *cmd)
+{
+	struct uwb_rsv *rsv, *found = NULL;
+	int i = 0;
+
+	list_for_each_entry(rsv, &rc->dbg->rsvs, pal_node) {
+		if (i == cmd->index) {
+			found = rsv;
+			break;
+		}
+	}
+	if (!found)
+		return -EINVAL;
+
+	list_del(&found->pal_node);
+	uwb_rsv_terminate(found);
+
+	return 0;
+}
+
+static int command_open(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+
+	return 0;
+}
+
+static ssize_t command_write(struct file *file, const char __user *buf,
+			 size_t len, loff_t *off)
+{
+	struct uwb_rc *rc = file->private_data;
+	struct uwb_dbg_cmd cmd;
+	int ret;
+
+	if (len != sizeof(struct uwb_dbg_cmd))
+		return -EINVAL;
+
+	if (copy_from_user(&cmd, buf, len) != 0)
+		return -EFAULT;
+
+	switch (cmd.type) {
+	case UWB_DBG_CMD_RSV_ESTABLISH:
+		ret = cmd_rsv_establish(rc, &cmd.rsv_establish);
+		break;
+	case UWB_DBG_CMD_RSV_TERMINATE:
+		ret = cmd_rsv_terminate(rc, &cmd.rsv_terminate);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret < 0 ? ret : len;
+}
+
+static struct file_operations command_fops = {
+	.open   = command_open,
+	.write  = command_write,
+	.read   = NULL,
+	.llseek = no_llseek,
+	.owner  = THIS_MODULE,
+};
+
+static int reservations_print(struct seq_file *s, void *p)
+{
+	struct uwb_rc *rc = s->private;
+	struct uwb_rsv *rsv;
+
+	mutex_lock(&rc->rsvs_mutex);
+
+	list_for_each_entry(rsv, &rc->reservations, rc_node) {
+		struct uwb_dev_addr devaddr;
+		char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE];
+		bool is_owner;
+		char buf[72];
+
+		uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr);
+		if (rsv->target.type == UWB_RSV_TARGET_DEV) {
+			devaddr = rsv->target.dev->dev_addr;
+			is_owner = &rc->uwb_dev == rsv->owner;
+		} else {
+			devaddr = rsv->target.devaddr;
+			is_owner = true;
+		}
+		uwb_dev_addr_print(target, sizeof(target), &devaddr);
+
+		seq_printf(s, "%c %s -> %s: %s\n",
+			   is_owner ? 'O' : 'T',
+			   owner, target, uwb_rsv_state_str(rsv->state));
+		seq_printf(s, "  stream: %d  type: %s\n",
+			   rsv->stream, uwb_rsv_type_str(rsv->type));
+		bitmap_scnprintf(buf, sizeof(buf), rsv->mas.bm, UWB_NUM_MAS);
+		seq_printf(s, "  %s\n", buf);
+	}
+
+	mutex_unlock(&rc->rsvs_mutex);
+
+	return 0;
+}
+
+static int reservations_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, reservations_print, inode->i_private);
+}
+
+static struct file_operations reservations_fops = {
+	.open    = reservations_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = single_release,
+	.owner   = THIS_MODULE,
+};
+
+static int drp_avail_print(struct seq_file *s, void *p)
+{
+	struct uwb_rc *rc = s->private;
+	char buf[72];
+
+	bitmap_scnprintf(buf, sizeof(buf), rc->drp_avail.global, UWB_NUM_MAS);
+	seq_printf(s, "global:  %s\n", buf);
+	bitmap_scnprintf(buf, sizeof(buf), rc->drp_avail.local, UWB_NUM_MAS);
+	seq_printf(s, "local:   %s\n", buf);
+	bitmap_scnprintf(buf, sizeof(buf), rc->drp_avail.pending, UWB_NUM_MAS);
+	seq_printf(s, "pending: %s\n", buf);
+
+	return 0;
+}
+
+static int drp_avail_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, drp_avail_print, inode->i_private);
+}
+
+static struct file_operations drp_avail_fops = {
+	.open    = drp_avail_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = single_release,
+	.owner   = THIS_MODULE,
+};
+
+static void uwb_dbg_new_rsv(struct uwb_rsv *rsv)
+{
+	struct uwb_rc *rc = rsv->rc;
+
+	if (rc->dbg->accept)
+		uwb_rsv_accept(rsv, uwb_dbg_rsv_cb, NULL);
+}
+
+/**
+ * uwb_dbg_add_rc - add a debug interface for a radio controller
+ * @rc: the radio controller
+ */
+void uwb_dbg_add_rc(struct uwb_rc *rc)
+{
+	rc->dbg = kzalloc(sizeof(struct uwb_dbg), GFP_KERNEL);
+	if (rc->dbg == NULL)
+		return;
+
+	INIT_LIST_HEAD(&rc->dbg->rsvs);
+
+	uwb_pal_init(&rc->dbg->pal);
+	rc->dbg->pal.new_rsv = uwb_dbg_new_rsv;
+	uwb_pal_register(rc, &rc->dbg->pal);
+	if (root_dir) {
+		rc->dbg->root_d = debugfs_create_dir(dev_name(&rc->uwb_dev.dev),
+						     root_dir);
+		rc->dbg->command_f = debugfs_create_file("command", 0200,
+							 rc->dbg->root_d, rc,
+							 &command_fops);
+		rc->dbg->reservations_f = debugfs_create_file("reservations", 0444,
+							      rc->dbg->root_d, rc,
+							      &reservations_fops);
+		rc->dbg->accept_f = debugfs_create_bool("accept", 0644,
+							rc->dbg->root_d,
+							&rc->dbg->accept);
+		rc->dbg->drp_avail_f = debugfs_create_file("drp_avail", 0444,
+							   rc->dbg->root_d, rc,
+							   &drp_avail_fops);
+	}
+}
+
+/**
+ * uwb_dbg_add_rc - remove a radio controller's debug interface
+ * @rc: the radio controller
+ */
+void uwb_dbg_del_rc(struct uwb_rc *rc)
+{
+	struct uwb_rsv *rsv, *t;
+
+	if (rc->dbg == NULL)
+		return;
+
+	list_for_each_entry_safe(rsv, t, &rc->dbg->rsvs, pal_node) {
+		uwb_rsv_destroy(rsv);
+	}
+
+	uwb_pal_unregister(rc, &rc->dbg->pal);
+
+	if (root_dir) {
+		debugfs_remove(rc->dbg->drp_avail_f);
+		debugfs_remove(rc->dbg->accept_f);
+		debugfs_remove(rc->dbg->reservations_f);
+		debugfs_remove(rc->dbg->command_f);
+		debugfs_remove(rc->dbg->root_d);
+	}
+}
+
+/**
+ * uwb_dbg_exit - initialize the debug interface sub-module
+ */
+void uwb_dbg_init(void)
+{
+	root_dir = debugfs_create_dir("uwb", NULL);
+}
+
+/**
+ * uwb_dbg_exit - clean-up the debug interface sub-module
+ */
+void uwb_dbg_exit(void)
+{
+	debugfs_remove(root_dir);
+}
diff --git a/drivers/uwb/uwb-internal.h b/drivers/uwb/uwb-internal.h
new file mode 100644
index 0000000..2ad307d
--- /dev/null
+++ b/drivers/uwb/uwb-internal.h
@@ -0,0 +1,305 @@
+/*
+ * Ultra Wide Band
+ * UWB internal API
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ * This contains most of the internal API for UWB. This is stuff used
+ * across the stack that of course, is of no interest to the rest.
+ *
+ * Some parts might end up going public (like uwb_rc_*())...
+ */
+
+#ifndef __UWB_INTERNAL_H__
+#define __UWB_INTERNAL_H__
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/uwb.h>
+#include <linux/mutex.h>
+
+struct uwb_beca_e;
+
+/* General device API */
+extern void uwb_dev_init(struct uwb_dev *uwb_dev);
+extern int __uwb_dev_offair(struct uwb_dev *, struct uwb_rc *);
+extern int uwb_dev_add(struct uwb_dev *uwb_dev, struct device *parent_dev,
+		       struct uwb_rc *parent_rc);
+extern void uwb_dev_rm(struct uwb_dev *uwb_dev);
+extern void uwbd_dev_onair(struct uwb_rc *, struct uwb_beca_e *);
+extern void uwbd_dev_offair(struct uwb_beca_e *);
+void uwb_notify(struct uwb_rc *rc, struct uwb_dev *uwb_dev, enum uwb_notifs event);
+
+/* General UWB Radio Controller Internal API */
+extern struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *);
+static inline struct uwb_rc *__uwb_rc_get(struct uwb_rc *rc)
+{
+	uwb_dev_get(&rc->uwb_dev);
+	return rc;
+}
+
+static inline void __uwb_rc_put(struct uwb_rc *rc)
+{
+	uwb_dev_put(&rc->uwb_dev);
+}
+
+extern int uwb_rc_reset(struct uwb_rc *rc);
+extern int uwb_rc_beacon(struct uwb_rc *rc,
+			 int channel, unsigned bpst_offset);
+extern int uwb_rc_scan(struct uwb_rc *rc,
+		       unsigned channel, enum uwb_scan_type type,
+		       unsigned bpst_offset);
+extern int uwb_rc_send_all_drp_ie(struct uwb_rc *rc);
+extern ssize_t uwb_rc_print_IEs(struct uwb_rc *rc, char *, size_t);
+extern void uwb_rc_ie_init(struct uwb_rc *);
+extern void uwb_rc_ie_init(struct uwb_rc *);
+extern ssize_t uwb_rc_ie_setup(struct uwb_rc *);
+extern void uwb_rc_ie_release(struct uwb_rc *);
+extern int uwb_rc_ie_add(struct uwb_rc *,
+			 const struct uwb_ie_hdr *, size_t);
+extern int uwb_rc_ie_rm(struct uwb_rc *, enum uwb_ie);
+
+extern const char *uwb_rc_strerror(unsigned code);
+
+/*
+ * Time to wait for a response to an RC command.
+ *
+ * Some commands can take a long time to response. e.g., START_BEACON
+ * may scan for several superframes before joining an existing beacon
+ * group and this can take around 600 ms.
+ */
+#define UWB_RC_CMD_TIMEOUT_MS 1000 /* ms */
+
+/*
+ * Notification/Event Handlers
+ */
+
+struct uwb_rc_neh;
+
+void uwb_rc_neh_create(struct uwb_rc *rc);
+void uwb_rc_neh_destroy(struct uwb_rc *rc);
+
+struct uwb_rc_neh *uwb_rc_neh_add(struct uwb_rc *rc, struct uwb_rccb *cmd,
+				  u8 expected_type, u16 expected_event,
+				  uwb_rc_cmd_cb_f cb, void *arg);
+void uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh);
+void uwb_rc_neh_arm(struct uwb_rc *rc, struct uwb_rc_neh *neh);
+void uwb_rc_neh_put(struct uwb_rc_neh *neh);
+
+/* Event size tables */
+extern int uwb_est_create(void);
+extern void uwb_est_destroy(void);
+
+
+/*
+ * UWB Events & management daemon
+ */
+
+/**
+ * enum uwb_event_type - types of UWB management daemon events
+ *
+ * The UWB management daemon (uwbd) can receive two types of events:
+ *   UWB_EVT_TYPE_NOTIF - notification from the radio controller.
+ *   UWB_EVT_TYPE_MSG   - a simple message.
+ */
+enum uwb_event_type {
+	UWB_EVT_TYPE_NOTIF,
+	UWB_EVT_TYPE_MSG,
+};
+
+/**
+ * struct uwb_event_notif - an event for a radio controller notification
+ * @size: Size of the buffer (ie: Guaranteed to contain at least
+ *        a full 'struct uwb_rceb')
+ * @rceb: Pointer to a kmalloced() event payload
+ */
+struct uwb_event_notif {
+	size_t size;
+	struct uwb_rceb *rceb;
+};
+
+/**
+ * enum uwb_event_message - an event for a message for asynchronous processing
+ *
+ * UWB_EVT_MSG_RESET - reset the radio controller and all PAL hardware.
+ */
+enum uwb_event_message {
+	UWB_EVT_MSG_RESET,
+};
+
+/**
+ * UWB Event
+ * @rc:         Radio controller that emitted the event (referenced)
+ * @ts_jiffies: Timestamp, when was it received
+ * @type:       This event's type.
+ */
+struct uwb_event {
+	struct list_head list_node;
+	struct uwb_rc *rc;
+	unsigned long ts_jiffies;
+	enum uwb_event_type type;
+	union {
+		struct uwb_event_notif notif;
+		enum uwb_event_message message;
+	};
+};
+
+extern void uwbd_start(void);
+extern void uwbd_stop(void);
+extern struct uwb_event *uwb_event_alloc(size_t, gfp_t gfp_mask);
+extern void uwbd_event_queue(struct uwb_event *);
+void uwbd_flush(struct uwb_rc *rc);
+
+/* UWB event handlers */
+extern int uwbd_evt_handle_rc_beacon(struct uwb_event *);
+extern int uwbd_evt_handle_rc_beacon_size(struct uwb_event *);
+extern int uwbd_evt_handle_rc_bpoie_change(struct uwb_event *);
+extern int uwbd_evt_handle_rc_bp_slot_change(struct uwb_event *);
+extern int uwbd_evt_handle_rc_drp(struct uwb_event *);
+extern int uwbd_evt_handle_rc_drp_avail(struct uwb_event *);
+
+int uwbd_msg_handle_reset(struct uwb_event *evt);
+
+
+/*
+ * Address management
+ */
+int uwb_rc_dev_addr_assign(struct uwb_rc *rc);
+int uwbd_evt_handle_rc_dev_addr_conflict(struct uwb_event *evt);
+
+/*
+ * UWB Beacon Cache
+ *
+ * Each beacon we received is kept in a cache--when we receive that
+ * beacon consistently, that means there is a new device that we have
+ * to add to the system.
+ */
+
+extern unsigned long beacon_timeout_ms;
+
+/** Beacon cache list */
+struct uwb_beca {
+	struct list_head list;
+	size_t entries;
+	struct mutex mutex;
+};
+
+extern struct uwb_beca uwb_beca;
+
+/**
+ * Beacon cache entry
+ *
+ * @jiffies_refresh: last time a beacon was  received that refreshed
+ *                   this cache entry.
+ * @uwb_dev: device connected to this beacon. This pointer is not
+ *           safe, you need to get it with uwb_dev_try_get()
+ *
+ * @hits: how many time we have seen this beacon since last time we
+ *        cleared it
+ */
+struct uwb_beca_e {
+	struct mutex mutex;
+	struct kref refcnt;
+	struct list_head node;
+	struct uwb_mac_addr *mac_addr;
+	struct uwb_dev_addr dev_addr;
+	u8 hits;
+	unsigned long ts_jiffies;
+	struct uwb_dev *uwb_dev;
+	struct uwb_rc_evt_beacon *be;
+	struct stats lqe_stats, rssi_stats;	/* radio statistics */
+};
+struct uwb_beacon_frame;
+extern ssize_t uwb_bce_print_IEs(struct uwb_dev *, struct uwb_beca_e *,
+				 char *, size_t);
+extern struct uwb_beca_e *__uwb_beca_add(struct uwb_rc_evt_beacon *,
+					 struct uwb_beacon_frame *,
+					 unsigned long);
+
+extern void uwb_bce_kfree(struct kref *_bce);
+static inline void uwb_bce_get(struct uwb_beca_e *bce)
+{
+	kref_get(&bce->refcnt);
+}
+static inline void uwb_bce_put(struct uwb_beca_e *bce)
+{
+	kref_put(&bce->refcnt, uwb_bce_kfree);
+}
+extern void uwb_beca_purge(void);
+extern void uwb_beca_release(void);
+
+struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc,
+				       const struct uwb_dev_addr *devaddr);
+struct uwb_dev *uwb_dev_get_by_macaddr(struct uwb_rc *rc,
+				       const struct uwb_mac_addr *macaddr);
+
+/* -- UWB Sysfs representation */
+extern struct class uwb_rc_class;
+extern struct device_attribute dev_attr_mac_address;
+extern struct device_attribute dev_attr_beacon;
+extern struct device_attribute dev_attr_scan;
+
+/* -- DRP Bandwidth allocator: bandwidth allocations, reservations, DRP */
+void uwb_rsv_init(struct uwb_rc *rc);
+int uwb_rsv_setup(struct uwb_rc *rc);
+void uwb_rsv_cleanup(struct uwb_rc *rc);
+
+void uwb_rsv_set_state(struct uwb_rsv *rsv, enum uwb_rsv_state new_state);
+void uwb_rsv_remove(struct uwb_rsv *rsv);
+struct uwb_rsv *uwb_rsv_find(struct uwb_rc *rc, struct uwb_dev *src,
+			     struct uwb_ie_drp *drp_ie);
+void uwb_rsv_sched_update(struct uwb_rc *rc);
+
+void uwb_drp_handle_timeout(struct uwb_rsv *rsv);
+int uwb_drp_ie_update(struct uwb_rsv *rsv);
+void uwb_drp_ie_to_bm(struct uwb_mas_bm *bm, const struct uwb_ie_drp *drp_ie);
+
+void uwb_drp_avail_init(struct uwb_rc *rc);
+int  uwb_drp_avail_reserve_pending(struct uwb_rc *rc, struct uwb_mas_bm *mas);
+void uwb_drp_avail_reserve(struct uwb_rc *rc, struct uwb_mas_bm *mas);
+void uwb_drp_avail_release(struct uwb_rc *rc, struct uwb_mas_bm *mas);
+void uwb_drp_avail_ie_update(struct uwb_rc *rc);
+
+/* -- PAL support */
+void uwb_rc_pal_init(struct uwb_rc *rc);
+
+/* -- Misc */
+
+extern ssize_t uwb_mac_frame_hdr_print(char *, size_t,
+				       const struct uwb_mac_frame_hdr *);
+
+/* -- Debug interface */
+void uwb_dbg_init(void);
+void uwb_dbg_exit(void);
+void uwb_dbg_add_rc(struct uwb_rc *rc);
+void uwb_dbg_del_rc(struct uwb_rc *rc);
+
+/* Workarounds for version specific stuff */
+
+static inline void uwb_dev_lock(struct uwb_dev *uwb_dev)
+{
+	down(&uwb_dev->dev.sem);
+}
+
+static inline void uwb_dev_unlock(struct uwb_dev *uwb_dev)
+{
+	up(&uwb_dev->dev.sem);
+}
+
+#endif /* #ifndef __UWB_INTERNAL_H__ */
diff --git a/drivers/uwb/uwbd.c b/drivers/uwb/uwbd.c
new file mode 100644
index 0000000..7890841
--- /dev/null
+++ b/drivers/uwb/uwbd.c
@@ -0,0 +1,410 @@
+/*
+ * Ultra Wide Band
+ * Neighborhood Management Daemon
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This daemon takes care of maintaing information that describes the
+ * UWB neighborhood that the radios in this machine can see. It also
+ * keeps a tab of which devices are visible, makes sure each HC sits
+ * on a different channel to avoid interfering, etc.
+ *
+ * Different drivers (radio controller, device, any API in general)
+ * communicate with this daemon through an event queue. Daemon wakes
+ * up, takes a list of events and handles them one by one; handling
+ * function is extracted from a table based on the event's type and
+ * subtype. Events are freed only if the handling function says so.
+ *
+ *   . Lock protecting the event list has to be an spinlock and locked
+ *     with IRQSAVE because it might be called from an interrupt
+ *     context (ie: when events arrive and the notification drops
+ *     down from the ISR).
+ *
+ *   . UWB radio controller drivers queue events to the daemon using
+ *     uwbd_event_queue(). They just get the event, chew it to make it
+ *     look like UWBD likes it and pass it in a buffer allocated with
+ *     uwb_event_alloc().
+ *
+ * EVENTS
+ *
+ * Events have a type, a subtype, a lenght, some other stuff and the
+ * data blob, which depends on the event. The header is 'struct
+ * uwb_event'; for payloads, see 'struct uwbd_evt_*'.
+ *
+ * EVENT HANDLER TABLES
+ *
+ * To find a handling function for an event, the type is used to index
+ * a subtype-table in the type-table. The subtype-table is indexed
+ * with the subtype to get the function that handles the event. Start
+ * with the main type-table 'uwbd_evt_type_handler'.
+ *
+ * DEVICES
+ *
+ * Devices are created when a bunch of beacons have been received and
+ * it is stablished that the device has stable radio presence. CREATED
+ * only, not configured. Devices are ONLY configured when an
+ * Application-Specific IE Probe is receieved, in which the device
+ * declares which Protocol ID it groks. Then the device is CONFIGURED
+ * (and the driver->probe() stuff of the device model is invoked).
+ *
+ * Devices are considered disconnected when a certain number of
+ * beacons are not received in an amount of time.
+ *
+ * Handler functions are called normally uwbd_evt_handle_*().
+ */
+
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/freezer.h>
+#include "uwb-internal.h"
+
+#define D_LOCAL 1
+#include <linux/uwb/debug.h>
+
+
+/**
+ * UWBD Event handler function signature
+ *
+ * Return !0 if the event needs not to be freed (ie the handler
+ * takes/took care of it). 0 means the daemon code will free the
+ * event.
+ *
+ * @evt->rc is already referenced and guaranteed to exist. See
+ * uwb_evt_handle().
+ */
+typedef int (*uwbd_evt_handler_f)(struct uwb_event *);
+
+/**
+ * Properties of a UWBD event
+ *
+ * @handler:    the function that will handle this event
+ * @name:       text name of event
+ */
+struct uwbd_event {
+	uwbd_evt_handler_f handler;
+	const char *name;
+};
+
+/** Table of handlers for and properties of the UWBD Radio Control Events */
+static
+struct uwbd_event uwbd_events[] = {
+	[UWB_RC_EVT_BEACON] = {
+		.handler = uwbd_evt_handle_rc_beacon,
+		.name = "BEACON_RECEIVED"
+	},
+	[UWB_RC_EVT_BEACON_SIZE] = {
+		.handler = uwbd_evt_handle_rc_beacon_size,
+		.name = "BEACON_SIZE_CHANGE"
+	},
+	[UWB_RC_EVT_BPOIE_CHANGE] = {
+		.handler = uwbd_evt_handle_rc_bpoie_change,
+		.name = "BPOIE_CHANGE"
+	},
+	[UWB_RC_EVT_BP_SLOT_CHANGE] = {
+		.handler = uwbd_evt_handle_rc_bp_slot_change,
+		.name = "BP_SLOT_CHANGE"
+	},
+	[UWB_RC_EVT_DRP_AVAIL] = {
+		.handler = uwbd_evt_handle_rc_drp_avail,
+		.name = "DRP_AVAILABILITY_CHANGE"
+	},
+	[UWB_RC_EVT_DRP] = {
+		.handler = uwbd_evt_handle_rc_drp,
+		.name = "DRP"
+	},
+	[UWB_RC_EVT_DEV_ADDR_CONFLICT] = {
+		.handler = uwbd_evt_handle_rc_dev_addr_conflict,
+		.name = "DEV_ADDR_CONFLICT",
+	},
+};
+
+
+
+struct uwbd_evt_type_handler {
+	const char *name;
+	struct uwbd_event *uwbd_events;
+	size_t size;
+};
+
+#define UWBD_EVT_TYPE_HANDLER(n,a) {		\
+	.name = (n),				\
+	.uwbd_events = (a),			\
+	.size = sizeof(a)/sizeof((a)[0])	\
+}
+
+
+/** Table of handlers for each UWBD Event type. */
+static
+struct uwbd_evt_type_handler uwbd_evt_type_handlers[] = {
+	[UWB_RC_CET_GENERAL] = UWBD_EVT_TYPE_HANDLER("RC", uwbd_events)
+};
+
+static const
+size_t uwbd_evt_type_handlers_len =
+	sizeof(uwbd_evt_type_handlers) / sizeof(uwbd_evt_type_handlers[0]);
+
+static const struct uwbd_event uwbd_message_handlers[] = {
+	[UWB_EVT_MSG_RESET] = {
+		.handler = uwbd_msg_handle_reset,
+		.name = "reset",
+	},
+};
+
+static DEFINE_MUTEX(uwbd_event_mutex);
+
+/**
+ * Handle an URC event passed to the UWB Daemon
+ *
+ * @evt: the event to handle
+ * @returns: 0 if the event can be kfreed, !0 on the contrary
+ *           (somebody else took ownership) [coincidentally, returning
+ *           a <0 errno code will free it :)].
+ *
+ * Looks up the two indirection tables (one for the type, one for the
+ * subtype) to decide which function handles it and then calls the
+ * handler.
+ *
+ * The event structure passed to the event handler has the radio
+ * controller in @evt->rc referenced. The reference will be dropped
+ * once the handler returns, so if it needs it for longer (async),
+ * it'll need to take another one.
+ */
+static
+int uwbd_event_handle_urc(struct uwb_event *evt)
+{
+	struct uwbd_evt_type_handler *type_table;
+	uwbd_evt_handler_f handler;
+	u8 type, context;
+	u16 event;
+
+	type = evt->notif.rceb->bEventType;
+	event = le16_to_cpu(evt->notif.rceb->wEvent);
+	context = evt->notif.rceb->bEventContext;
+
+	if (type > uwbd_evt_type_handlers_len) {
+		printk(KERN_ERR "UWBD: event type %u: unknown (too high)\n", type);
+		return -EINVAL;
+	}
+	type_table = &uwbd_evt_type_handlers[type];
+	if (type_table->uwbd_events == NULL) {
+		printk(KERN_ERR "UWBD: event type %u: unknown\n", type);
+		return -EINVAL;
+	}
+	if (event > type_table->size) {
+		printk(KERN_ERR "UWBD: event %s[%u]: unknown (too high)\n",
+		       type_table->name, event);
+		return -EINVAL;
+	}
+	handler = type_table->uwbd_events[event].handler;
+	if (handler == NULL) {
+		printk(KERN_ERR "UWBD: event %s[%u]: unknown\n", type_table->name, event);
+		return -EINVAL;
+	}
+	return (*handler)(evt);
+}
+
+static void uwbd_event_handle_message(struct uwb_event *evt)
+{
+	struct uwb_rc *rc;
+	int result;
+
+	rc = evt->rc;
+
+	if (evt->message < 0 || evt->message >= ARRAY_SIZE(uwbd_message_handlers)) {
+		dev_err(&rc->uwb_dev.dev, "UWBD: invalid message type %d\n", evt->message);
+		return;
+	}
+
+	/* If this is a reset event we need to drop the
+	 * uwbd_event_mutex or it deadlocks when the reset handler
+	 * attempts to flush the uwbd events. */
+	if (evt->message == UWB_EVT_MSG_RESET)
+		mutex_unlock(&uwbd_event_mutex);
+
+	result = uwbd_message_handlers[evt->message].handler(evt);
+	if (result < 0)
+		dev_err(&rc->uwb_dev.dev, "UWBD: '%s' message failed: %d\n",
+			uwbd_message_handlers[evt->message].name, result);
+
+	if (evt->message == UWB_EVT_MSG_RESET)
+		mutex_lock(&uwbd_event_mutex);
+}
+
+static void uwbd_event_handle(struct uwb_event *evt)
+{
+	struct uwb_rc *rc;
+	int should_keep;
+
+	rc = evt->rc;
+
+	if (rc->ready) {
+		switch (evt->type) {
+		case UWB_EVT_TYPE_NOTIF:
+			should_keep = uwbd_event_handle_urc(evt);
+			if (should_keep <= 0)
+				kfree(evt->notif.rceb);
+			break;
+		case UWB_EVT_TYPE_MSG:
+			uwbd_event_handle_message(evt);
+			break;
+		default:
+			dev_err(&rc->uwb_dev.dev, "UWBD: invalid event type %d\n", evt->type);
+			break;
+		}
+	}
+
+	__uwb_rc_put(rc);	/* for the __uwb_rc_get() in uwb_rc_notif_cb() */
+}
+/* The UWB Daemon */
+
+
+/** Daemon's PID: used to decide if we can queue or not */
+static int uwbd_pid;
+/** Daemon's task struct for managing the kthread */
+static struct task_struct *uwbd_task;
+/** Daemon's waitqueue for waiting for new events */
+static DECLARE_WAIT_QUEUE_HEAD(uwbd_wq);
+/** Daemon's list of events; we queue/dequeue here */
+static struct list_head uwbd_event_list = LIST_HEAD_INIT(uwbd_event_list);
+/** Daemon's list lock to protect concurent access */
+static DEFINE_SPINLOCK(uwbd_event_list_lock);
+
+
+/**
+ * UWB Daemon
+ *
+ * Listens to all UWB notifications and takes care to track the state
+ * of the UWB neighboorhood for the kernel. When we do a run, we
+ * spinlock, move the list to a private copy and release the
+ * lock. Hold it as little as possible. Not a conflict: it is
+ * guaranteed we own the events in the private list.
+ *
+ * FIXME: should change so we don't have a 1HZ timer all the time, but
+ *        only if there are devices.
+ */
+static int uwbd(void *unused)
+{
+	unsigned long flags;
+	struct list_head list = LIST_HEAD_INIT(list);
+	struct uwb_event *evt, *nxt;
+	int should_stop = 0;
+	while (1) {
+		wait_event_interruptible_timeout(
+			uwbd_wq,
+			!list_empty(&uwbd_event_list)
+			  || (should_stop = kthread_should_stop()),
+			HZ);
+		if (should_stop)
+			break;
+		try_to_freeze();
+
+		mutex_lock(&uwbd_event_mutex);
+		spin_lock_irqsave(&uwbd_event_list_lock, flags);
+		list_splice_init(&uwbd_event_list, &list);
+		spin_unlock_irqrestore(&uwbd_event_list_lock, flags);
+		list_for_each_entry_safe(evt, nxt, &list, list_node) {
+			list_del(&evt->list_node);
+			uwbd_event_handle(evt);
+			kfree(evt);
+		}
+		mutex_unlock(&uwbd_event_mutex);
+
+		uwb_beca_purge();	/* Purge devices that left */
+	}
+	return 0;
+}
+
+
+/** Start the UWB daemon */
+void uwbd_start(void)
+{
+	uwbd_task = kthread_run(uwbd, NULL, "uwbd");
+	if (uwbd_task == NULL)
+		printk(KERN_ERR "UWB: Cannot start management daemon; "
+		       "UWB won't work\n");
+	else
+		uwbd_pid = uwbd_task->pid;
+}
+
+/* Stop the UWB daemon and free any unprocessed events */
+void uwbd_stop(void)
+{
+	unsigned long flags;
+	struct uwb_event *evt, *nxt;
+	kthread_stop(uwbd_task);
+	spin_lock_irqsave(&uwbd_event_list_lock, flags);
+	uwbd_pid = 0;
+	list_for_each_entry_safe(evt, nxt, &uwbd_event_list, list_node) {
+		if (evt->type == UWB_EVT_TYPE_NOTIF)
+			kfree(evt->notif.rceb);
+		kfree(evt);
+	}
+	spin_unlock_irqrestore(&uwbd_event_list_lock, flags);
+	uwb_beca_release();
+}
+
+/*
+ * Queue an event for the management daemon
+ *
+ * When some lower layer receives an event, it uses this function to
+ * push it forward to the UWB daemon.
+ *
+ * Once you pass the event, you don't own it any more, but the daemon
+ * does. It will uwb_event_free() it when done, so make sure you
+ * uwb_event_alloc()ed it or bad things will happen.
+ *
+ * If the daemon is not running, we just free the event.
+ */
+void uwbd_event_queue(struct uwb_event *evt)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&uwbd_event_list_lock, flags);
+	if (uwbd_pid != 0) {
+		list_add(&evt->list_node, &uwbd_event_list);
+		wake_up_all(&uwbd_wq);
+	} else {
+		__uwb_rc_put(evt->rc);
+		if (evt->type == UWB_EVT_TYPE_NOTIF)
+			kfree(evt->notif.rceb);
+		kfree(evt);
+	}
+	spin_unlock_irqrestore(&uwbd_event_list_lock, flags);
+	return;
+}
+
+void uwbd_flush(struct uwb_rc *rc)
+{
+	struct uwb_event *evt, *nxt;
+
+	mutex_lock(&uwbd_event_mutex);
+
+	spin_lock_irq(&uwbd_event_list_lock);
+	list_for_each_entry_safe(evt, nxt, &uwbd_event_list, list_node) {
+		if (evt->rc == rc) {
+			__uwb_rc_put(rc);
+			list_del(&evt->list_node);
+			if (evt->type == UWB_EVT_TYPE_NOTIF)
+				kfree(evt->notif.rceb);
+			kfree(evt);
+		}
+	}
+	spin_unlock_irq(&uwbd_event_list_lock);
+
+	mutex_unlock(&uwbd_event_mutex);
+}
diff --git a/drivers/uwb/whc-rc.c b/drivers/uwb/whc-rc.c
new file mode 100644
index 0000000..1711dea
--- /dev/null
+++ b/drivers/uwb/whc-rc.c
@@ -0,0 +1,520 @@
+/*
+ * Wireless Host Controller: Radio Control Interface (WHCI v0.95[2.3])
+ * Radio Control command/event transport to the UWB stack
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Initialize and hook up the Radio Control interface.
+ *
+ * For each device probed, creates an 'struct whcrc' which contains
+ * just the representation of the UWB Radio Controller, and the logic
+ * for reading notifications and passing them to the UWB Core.
+ *
+ * So we initialize all of those, register the UWB Radio Controller
+ * and setup the notification/event handle to pipe the notifications
+ * to the UWB management Daemon.
+ *
+ * Once uwb_rc_add() is called, the UWB stack takes control, resets
+ * the radio and readies the device to take commands the UWB
+ * API/user-space.
+ *
+ * Note this driver is just a transport driver; the commands are
+ * formed at the UWB stack and given to this driver who will deliver
+ * them to the hw and transfer the replies/notifications back to the
+ * UWB stack through the UWB daemon (UWBD).
+ */
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/uwb.h>
+#include <linux/uwb/whci.h>
+#include <linux/uwb/umc.h>
+#include "uwb-internal.h"
+
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+/**
+ * Descriptor for an instance of the UWB Radio Control Driver that
+ * attaches to the URC interface of the WHCI PCI card.
+ *
+ * Unless there is a lock specific to the 'data members', all access
+ * is protected by uwb_rc->mutex.
+ */
+struct whcrc {
+	struct umc_dev *umc_dev;
+	struct uwb_rc *uwb_rc;		/* UWB host controller */
+
+	unsigned long area;
+	void __iomem *rc_base;
+	size_t rc_len;
+	spinlock_t irq_lock;
+
+	void *evt_buf, *cmd_buf;
+	dma_addr_t evt_dma_buf, cmd_dma_buf;
+	wait_queue_head_t cmd_wq;
+	struct work_struct event_work;
+};
+
+/**
+ * Execute an UWB RC command on WHCI/RC
+ *
+ * @rc:       Instance of a Radio Controller that is a whcrc
+ * @cmd:      Buffer containing the RCCB and payload to execute
+ * @cmd_size: Size of the command buffer.
+ *
+ * We copy the command into whcrc->cmd_buf (as it is pretty and
+ * aligned`and physically contiguous) and then press the right keys in
+ * the controller's URCCMD register to get it to read it. We might
+ * have to wait for the cmd_sem to be open to us.
+ *
+ * NOTE: rc's mutex has to be locked
+ */
+static int whcrc_cmd(struct uwb_rc *uwb_rc,
+	      const struct uwb_rccb *cmd, size_t cmd_size)
+{
+	int result = 0;
+	struct whcrc *whcrc = uwb_rc->priv;
+	struct device *dev = &whcrc->umc_dev->dev;
+	u32 urccmd;
+
+	d_fnstart(3, dev, "(%p, %p, %zu)\n", uwb_rc, cmd, cmd_size);
+	might_sleep();
+
+	if (cmd_size >= 4096) {
+		result = -E2BIG;
+		goto error;
+	}
+
+	/*
+	 * If the URC is halted, then the hardware has reset itself.
+	 * Attempt to recover by restarting the device and then return
+	 * an error as it's likely that the current command isn't
+	 * valid for a newly started RC.
+	 */
+	if (le_readl(whcrc->rc_base + URCSTS) & URCSTS_HALTED) {
+		dev_err(dev, "requesting reset of halted radio controller\n");
+		uwb_rc_reset_all(uwb_rc);
+		result = -EIO;
+		goto error;
+	}
+
+	result = wait_event_timeout(whcrc->cmd_wq,
+		!(le_readl(whcrc->rc_base + URCCMD) & URCCMD_ACTIVE), HZ/2);
+	if (result == 0) {
+		dev_err(dev, "device is not ready to execute commands\n");
+		result = -ETIMEDOUT;
+		goto error;
+	}
+
+	memmove(whcrc->cmd_buf, cmd, cmd_size);
+	le_writeq(whcrc->cmd_dma_buf, whcrc->rc_base + URCCMDADDR);
+
+	spin_lock(&whcrc->irq_lock);
+	urccmd = le_readl(whcrc->rc_base + URCCMD);
+	urccmd &= ~(URCCMD_EARV | URCCMD_SIZE_MASK);
+	le_writel(urccmd | URCCMD_ACTIVE | URCCMD_IWR | cmd_size,
+		  whcrc->rc_base + URCCMD);
+	spin_unlock(&whcrc->irq_lock);
+
+error:
+	d_fnend(3, dev, "(%p, %p, %zu) = %d\n",
+		uwb_rc, cmd, cmd_size, result);
+	return result;
+}
+
+static int whcrc_reset(struct uwb_rc *rc)
+{
+	struct whcrc *whcrc = rc->priv;
+
+	return umc_controller_reset(whcrc->umc_dev);
+}
+
+/**
+ * Reset event reception mechanism and tell hw we are ready to get more
+ *
+ * We have read all the events in the event buffer, so we are ready to
+ * reset it to the beginning.
+ *
+ * This is only called during initialization or after an event buffer
+ * has been retired.  This means we can be sure that event processing
+ * is disabled and it's safe to update the URCEVTADDR register.
+ *
+ * There's no need to wait for the event processing to start as the
+ * URC will not clear URCCMD_ACTIVE until (internal) event buffer
+ * space is available.
+ */
+static
+void whcrc_enable_events(struct whcrc *whcrc)
+{
+	struct device *dev = &whcrc->umc_dev->dev;
+	u32 urccmd;
+
+	d_fnstart(4, dev, "(whcrc %p)\n", whcrc);
+
+	le_writeq(whcrc->evt_dma_buf, whcrc->rc_base + URCEVTADDR);
+
+	spin_lock(&whcrc->irq_lock);
+	urccmd = le_readl(whcrc->rc_base + URCCMD) & ~URCCMD_ACTIVE;
+	le_writel(urccmd | URCCMD_EARV, whcrc->rc_base + URCCMD);
+	spin_unlock(&whcrc->irq_lock);
+
+	d_fnend(4, dev, "(whcrc %p) = void\n", whcrc);
+}
+
+static void whcrc_event_work(struct work_struct *work)
+{
+	struct whcrc *whcrc = container_of(work, struct whcrc, event_work);
+	struct device *dev = &whcrc->umc_dev->dev;
+	size_t size;
+	u64 urcevtaddr;
+
+	urcevtaddr = le_readq(whcrc->rc_base + URCEVTADDR);
+	size = urcevtaddr & URCEVTADDR_OFFSET_MASK;
+
+	d_printf(3, dev, "received %zu octet event\n", size);
+	d_dump(4, dev, whcrc->evt_buf, size > 32 ? 32 : size);
+
+	uwb_rc_neh_grok(whcrc->uwb_rc, whcrc->evt_buf, size);
+	whcrc_enable_events(whcrc);
+}
+
+/**
+ * Catch interrupts?
+ *
+ * We ack inmediately (and expect the hw to do the right thing and
+ * raise another IRQ if things have changed :)
+ */
+static
+irqreturn_t whcrc_irq_cb(int irq, void *_whcrc)
+{
+	struct whcrc *whcrc = _whcrc;
+	struct device *dev = &whcrc->umc_dev->dev;
+	u32 urcsts;
+
+	urcsts = le_readl(whcrc->rc_base + URCSTS);
+	if (!(urcsts & URCSTS_INT_MASK))
+		return IRQ_NONE;
+	le_writel(urcsts & URCSTS_INT_MASK, whcrc->rc_base + URCSTS);
+
+	d_printf(4, dev, "acked 0x%08x, urcsts 0x%08x\n",
+		 le_readl(whcrc->rc_base + URCSTS), urcsts);
+
+	if (urcsts & URCSTS_HSE) {
+		dev_err(dev, "host system error -- hardware halted\n");
+		/* FIXME: do something sensible here */
+		goto out;
+	}
+	if (urcsts & URCSTS_ER) {
+		d_printf(3, dev, "ER: event ready\n");
+		schedule_work(&whcrc->event_work);
+	}
+	if (urcsts & URCSTS_RCI) {
+		d_printf(3, dev, "RCI: ready to execute another command\n");
+		wake_up_all(&whcrc->cmd_wq);
+	}
+out:
+	return IRQ_HANDLED;
+}
+
+
+/**
+ * Initialize a UMC RC interface: map regions, get (shared) IRQ
+ */
+static
+int whcrc_setup_rc_umc(struct whcrc *whcrc)
+{
+	int result = 0;
+	struct device *dev = &whcrc->umc_dev->dev;
+	struct umc_dev *umc_dev = whcrc->umc_dev;
+
+	whcrc->area = umc_dev->resource.start;
+	whcrc->rc_len = umc_dev->resource.end - umc_dev->resource.start + 1;
+	result = -EBUSY;
+	if (request_mem_region(whcrc->area, whcrc->rc_len, KBUILD_MODNAME)
+	    == NULL) {
+		dev_err(dev, "can't request URC region (%zu bytes @ 0x%lx): %d\n",
+			whcrc->rc_len, whcrc->area, result);
+		goto error_request_region;
+	}
+
+	whcrc->rc_base = ioremap_nocache(whcrc->area, whcrc->rc_len);
+	if (whcrc->rc_base == NULL) {
+		dev_err(dev, "can't ioremap registers (%zu bytes @ 0x%lx): %d\n",
+			whcrc->rc_len, whcrc->area, result);
+		goto error_ioremap_nocache;
+	}
+
+	result = request_irq(umc_dev->irq, whcrc_irq_cb, IRQF_SHARED,
+			     KBUILD_MODNAME, whcrc);
+	if (result < 0) {
+		dev_err(dev, "can't allocate IRQ %d: %d\n",
+			umc_dev->irq, result);
+		goto error_request_irq;
+	}
+
+	result = -ENOMEM;
+	whcrc->cmd_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE,
+					    &whcrc->cmd_dma_buf, GFP_KERNEL);
+	if (whcrc->cmd_buf == NULL) {
+		dev_err(dev, "Can't allocate cmd transfer buffer\n");
+		goto error_cmd_buffer;
+	}
+
+	whcrc->evt_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE,
+					    &whcrc->evt_dma_buf, GFP_KERNEL);
+	if (whcrc->evt_buf == NULL) {
+		dev_err(dev, "Can't allocate evt transfer buffer\n");
+		goto error_evt_buffer;
+	}
+	d_printf(3, dev, "UWB RC Interface: %zu bytes at 0x%p, irq %u\n",
+		 whcrc->rc_len, whcrc->rc_base, umc_dev->irq);
+	return 0;
+
+error_evt_buffer:
+	dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf,
+			  whcrc->cmd_dma_buf);
+error_cmd_buffer:
+	free_irq(umc_dev->irq, whcrc);
+error_request_irq:
+	iounmap(whcrc->rc_base);
+error_ioremap_nocache:
+	release_mem_region(whcrc->area, whcrc->rc_len);
+error_request_region:
+	return result;
+}
+
+
+/**
+ * Release RC's UMC resources
+ */
+static
+void whcrc_release_rc_umc(struct whcrc *whcrc)
+{
+	struct umc_dev *umc_dev = whcrc->umc_dev;
+
+	dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->evt_buf,
+			  whcrc->evt_dma_buf);
+	dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf,
+			  whcrc->cmd_dma_buf);
+	free_irq(umc_dev->irq, whcrc);
+	iounmap(whcrc->rc_base);
+	release_mem_region(whcrc->area, whcrc->rc_len);
+}
+
+
+/**
+ * whcrc_start_rc - start a WHCI radio controller
+ * @whcrc: the radio controller to start
+ *
+ * Reset the UMC device, start the radio controller, enable events and
+ * finally enable interrupts.
+ */
+static int whcrc_start_rc(struct uwb_rc *rc)
+{
+	struct whcrc *whcrc = rc->priv;
+	int result = 0;
+	struct device *dev = &whcrc->umc_dev->dev;
+	unsigned long start, duration;
+
+	/* Reset the thing */
+	le_writel(URCCMD_RESET, whcrc->rc_base + URCCMD);
+	if (d_test(3))
+		start = jiffies;
+	if (whci_wait_for(dev, whcrc->rc_base + URCCMD, URCCMD_RESET, 0,
+			  5000, "device to reset at init") < 0) {
+		result = -EBUSY;
+		goto error;
+	} else if (d_test(3)) {
+		duration = jiffies - start;
+		if (duration > msecs_to_jiffies(40))
+			dev_err(dev, "Device took %ums to "
+				     "reset. MAX expected: 40ms\n",
+				     jiffies_to_msecs(duration));
+	}
+
+	/* Set the event buffer, start the controller (enable IRQs later) */
+	le_writel(0, whcrc->rc_base + URCINTR);
+	le_writel(URCCMD_RS, whcrc->rc_base + URCCMD);
+	result = -ETIMEDOUT;
+	if (d_test(3))
+		start = jiffies;
+	if (whci_wait_for(dev, whcrc->rc_base + URCSTS, URCSTS_HALTED, 0,
+			  5000, "device to start") < 0)
+		goto error;
+	if (d_test(3)) {
+		duration = jiffies - start;
+		if (duration > msecs_to_jiffies(40))
+			dev_err(dev, "Device took %ums to start. "
+				     "MAX expected: 40ms\n",
+				     jiffies_to_msecs(duration));
+	}
+	whcrc_enable_events(whcrc);
+	result = 0;
+	le_writel(URCINTR_EN_ALL, whcrc->rc_base + URCINTR);
+error:
+	return result;
+}
+
+
+/**
+ * whcrc_stop_rc - stop a WHCI radio controller
+ * @whcrc: the radio controller to stop
+ *
+ * Disable interrupts and cancel any pending event processing work
+ * before clearing the Run/Stop bit.
+ */
+static
+void whcrc_stop_rc(struct uwb_rc *rc)
+{
+	struct whcrc *whcrc = rc->priv;
+	struct umc_dev *umc_dev = whcrc->umc_dev;
+
+	le_writel(0, whcrc->rc_base + URCINTR);
+	cancel_work_sync(&whcrc->event_work);
+
+	le_writel(0, whcrc->rc_base + URCCMD);
+	whci_wait_for(&umc_dev->dev, whcrc->rc_base + URCSTS,
+		      URCSTS_HALTED, 0, 40, "URCSTS.HALTED");
+}
+
+static void whcrc_init(struct whcrc *whcrc)
+{
+	spin_lock_init(&whcrc->irq_lock);
+	init_waitqueue_head(&whcrc->cmd_wq);
+	INIT_WORK(&whcrc->event_work, whcrc_event_work);
+}
+
+/**
+ * Initialize the radio controller.
+ *
+ * NOTE: we setup whcrc->uwb_rc before calling uwb_rc_add(); in the
+ *       IRQ handler we use that to determine if the hw is ready to
+ *       handle events. Looks like a race condition, but it really is
+ *       not.
+ */
+static
+int whcrc_probe(struct umc_dev *umc_dev)
+{
+	int result;
+	struct uwb_rc *uwb_rc;
+	struct whcrc *whcrc;
+	struct device *dev = &umc_dev->dev;
+
+	d_fnstart(3, dev, "(umc_dev %p)\n", umc_dev);
+	result = -ENOMEM;
+	uwb_rc = uwb_rc_alloc();
+	if (uwb_rc == NULL) {
+		dev_err(dev, "unable to allocate RC instance\n");
+		goto error_rc_alloc;
+	}
+	whcrc = kzalloc(sizeof(*whcrc), GFP_KERNEL);
+	if (whcrc == NULL) {
+		dev_err(dev, "unable to allocate WHC-RC instance\n");
+		goto error_alloc;
+	}
+	whcrc_init(whcrc);
+	whcrc->umc_dev = umc_dev;
+
+	result = whcrc_setup_rc_umc(whcrc);
+	if (result < 0) {
+		dev_err(dev, "Can't setup RC UMC interface: %d\n", result);
+		goto error_setup_rc_umc;
+	}
+	whcrc->uwb_rc = uwb_rc;
+
+	uwb_rc->owner = THIS_MODULE;
+	uwb_rc->cmd   = whcrc_cmd;
+	uwb_rc->reset = whcrc_reset;
+	uwb_rc->start = whcrc_start_rc;
+	uwb_rc->stop  = whcrc_stop_rc;
+
+	result = uwb_rc_add(uwb_rc, dev, whcrc);
+	if (result < 0)
+		goto error_rc_add;
+	umc_set_drvdata(umc_dev, whcrc);
+	d_fnend(3, dev, "(umc_dev %p) = 0\n", umc_dev);
+	return 0;
+
+error_rc_add:
+	whcrc_release_rc_umc(whcrc);
+error_setup_rc_umc:
+	kfree(whcrc);
+error_alloc:
+	uwb_rc_put(uwb_rc);
+error_rc_alloc:
+	d_fnend(3, dev, "(umc_dev %p) = %d\n", umc_dev, result);
+	return result;
+}
+
+/**
+ * Clean up the radio control resources
+ *
+ * When we up the command semaphore, everybody possibly held trying to
+ * execute a command should be granted entry and then they'll see the
+ * host is quiescing and up it (so it will chain to the next waiter).
+ * This should not happen (in any case), as we can only remove when
+ * there are no handles open...
+ */
+static void whcrc_remove(struct umc_dev *umc_dev)
+{
+	struct whcrc *whcrc = umc_get_drvdata(umc_dev);
+	struct uwb_rc *uwb_rc = whcrc->uwb_rc;
+
+	umc_set_drvdata(umc_dev, NULL);
+	uwb_rc_rm(uwb_rc);
+	whcrc_release_rc_umc(whcrc);
+	kfree(whcrc);
+	uwb_rc_put(uwb_rc);
+	d_printf(1, &umc_dev->dev, "freed whcrc %p\n", whcrc);
+}
+
+/* PCI device ID's that we handle [so it gets loaded] */
+static struct pci_device_id whcrc_id_table[] = {
+	{ PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
+	{ /* empty last entry */ }
+};
+MODULE_DEVICE_TABLE(pci, whcrc_id_table);
+
+static struct umc_driver whcrc_driver = {
+	.name   = "whc-rc",
+	.cap_id = UMC_CAP_ID_WHCI_RC,
+	.probe  = whcrc_probe,
+	.remove = whcrc_remove,
+};
+
+static int __init whcrc_driver_init(void)
+{
+	return umc_driver_register(&whcrc_driver);
+}
+module_init(whcrc_driver_init);
+
+static void __exit whcrc_driver_exit(void)
+{
+	umc_driver_unregister(&whcrc_driver);
+}
+module_exit(whcrc_driver_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Wireless Host Controller Radio Control Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/whci.c b/drivers/uwb/whci.c
new file mode 100644
index 0000000..3df2388
--- /dev/null
+++ b/drivers/uwb/whci.c
@@ -0,0 +1,269 @@
+/*
+ * WHCI UWB Multi-interface Controller enumerator.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This file is released under the GNU GPL v2.
+ */
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/uwb/whci.h>
+#include <linux/uwb/umc.h>
+
+struct whci_card {
+	struct pci_dev *pci;
+	void __iomem *uwbbase;
+	u8 n_caps;
+	struct umc_dev *devs[0];
+};
+
+
+/* Fix faulty HW :( */
+static
+u64 whci_capdata_quirks(struct whci_card *card, u64 capdata)
+{
+	u64 capdata_orig = capdata;
+	struct pci_dev *pci_dev = card->pci;
+	if (pci_dev->vendor == PCI_VENDOR_ID_INTEL
+	    && (pci_dev->device == 0x0c3b || pci_dev->device == 0004)
+	    && pci_dev->class == 0x0d1010) {
+		switch (UWBCAPDATA_TO_CAP_ID(capdata)) {
+			/* WLP capability has 0x100 bytes of aperture */
+		case 0x80:
+			capdata |= 0x40 << 8; break;
+			/* WUSB capability has 0x80 bytes of aperture
+			 * and ID is 1 */
+		case 0x02:
+			capdata &= ~0xffff;
+			capdata |= 0x2001;
+			break;
+		}
+	}
+	if (capdata_orig != capdata)
+		dev_warn(&pci_dev->dev,
+			 "PCI v%04x d%04x c%06x#%02x: "
+			 "corrected capdata from %016Lx to %016Lx\n",
+			 pci_dev->vendor, pci_dev->device, pci_dev->class,
+			 (unsigned)UWBCAPDATA_TO_CAP_ID(capdata),
+			 (unsigned long long)capdata_orig,
+			 (unsigned long long)capdata);
+	return capdata;
+}
+
+
+/**
+ * whci_wait_for - wait for a WHCI register to be set
+ *
+ * Polls (for at most @max_ms ms) until '*@reg & @mask == @result'.
+ */
+int whci_wait_for(struct device *dev, u32 __iomem *reg, u32 mask, u32 result,
+	unsigned long max_ms, const char *tag)
+{
+	unsigned t = 0;
+	u32 val;
+	for (;;) {
+		val = le_readl(reg);
+		if ((val & mask) == result)
+			break;
+		msleep(10);
+		if (t >= max_ms) {
+			dev_err(dev, "timed out waiting for %s ", tag);
+			return -ETIMEDOUT;
+		}
+		t += 10;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(whci_wait_for);
+
+
+/*
+ * NOTE: the capinfo and capdata registers are slightly different
+ *       (size and cap-id fields). So for cap #0, we need to fill
+ *       in. Size comes from the size of the register block
+ *       (statically calculated); cap_id comes from nowhere, we use
+ *       zero, that is reserved, for the radio controller, because
+ *       none was defined at the spec level.
+ */
+static int whci_add_cap(struct whci_card *card, int n)
+{
+	struct umc_dev *umc;
+	u64 capdata;
+	int bar, err;
+
+	umc = umc_device_create(&card->pci->dev, n);
+	if (umc == NULL)
+		return -ENOMEM;
+
+	capdata = le_readq(card->uwbbase + UWBCAPDATA(n));
+
+	bar = UWBCAPDATA_TO_BAR(capdata) << 1;
+
+	capdata = whci_capdata_quirks(card, capdata);
+	/* Capability 0 is the radio controller. It's size is 32
+	 * bytes (WHCI0.95[2.3, T2-9]). */
+	umc->version         = UWBCAPDATA_TO_VERSION(capdata);
+	umc->cap_id          = n == 0 ? 0 : UWBCAPDATA_TO_CAP_ID(capdata);
+	umc->bar	     = bar;
+	umc->resource.start  = pci_resource_start(card->pci, bar)
+		+ UWBCAPDATA_TO_OFFSET(capdata);
+	umc->resource.end    = umc->resource.start
+		+ (n == 0 ? 0x20 : UWBCAPDATA_TO_SIZE(capdata)) - 1;
+	umc->resource.name   = umc->dev.bus_id;
+	umc->resource.flags  = card->pci->resource[bar].flags;
+	umc->resource.parent = &card->pci->resource[bar];
+	umc->irq             = card->pci->irq;
+
+	err = umc_device_register(umc);
+	if (err < 0)
+		goto error;
+	card->devs[n] = umc;
+	return 0;
+
+error:
+	kfree(umc);
+	return err;
+}
+
+static void whci_del_cap(struct whci_card *card, int n)
+{
+	struct umc_dev *umc = card->devs[n];
+
+	if (umc != NULL)
+		umc_device_unregister(umc);
+}
+
+static int whci_n_caps(struct pci_dev *pci)
+{
+	void __iomem *uwbbase;
+	u64 capinfo;
+
+	uwbbase = pci_iomap(pci, 0, 8);
+	if (!uwbbase)
+		return -ENOMEM;
+	capinfo = le_readq(uwbbase + UWBCAPINFO);
+	pci_iounmap(pci, uwbbase);
+
+	return UWBCAPINFO_TO_N_CAPS(capinfo);
+}
+
+static int whci_probe(struct pci_dev *pci, const struct pci_device_id *id)
+{
+	struct whci_card *card;
+	int err, n_caps, n;
+
+	err = pci_enable_device(pci);
+	if (err < 0)
+		goto error;
+	pci_enable_msi(pci);
+	pci_set_master(pci);
+	err = -ENXIO;
+	if (!pci_set_dma_mask(pci, DMA_64BIT_MASK))
+		pci_set_consistent_dma_mask(pci, DMA_64BIT_MASK);
+	else if (!pci_set_dma_mask(pci, DMA_32BIT_MASK))
+		pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK);
+	else
+		goto error_dma;
+
+	err = n_caps = whci_n_caps(pci);
+	if (n_caps < 0)
+		goto error_ncaps;
+
+	err = -ENOMEM;
+	card = kzalloc(sizeof(struct whci_card)
+		       + sizeof(struct whci_dev *) * (n_caps + 1),
+		       GFP_KERNEL);
+	if (card == NULL)
+		goto error_kzalloc;
+	card->pci = pci;
+	card->n_caps = n_caps;
+
+	err = -EBUSY;
+	if (!request_mem_region(pci_resource_start(pci, 0),
+				UWBCAPDATA_SIZE(card->n_caps),
+				"whci (capability data)"))
+		goto error_request_memregion;
+	err = -ENOMEM;
+	card->uwbbase = pci_iomap(pci, 0, UWBCAPDATA_SIZE(card->n_caps));
+	if (!card->uwbbase)
+		goto error_iomap;
+
+	/* Add each capability. */
+	for (n = 0; n <= card->n_caps; n++) {
+		err = whci_add_cap(card, n);
+		if (err < 0 && n == 0) {
+			dev_err(&pci->dev, "cannot bind UWB radio controller:"
+				" %d\n", err);
+			goto error_bind;
+		}
+		if (err < 0)
+			dev_warn(&pci->dev, "warning: cannot bind capability "
+				 "#%u: %d\n", n, err);
+	}
+	pci_set_drvdata(pci, card);
+	return 0;
+
+error_bind:
+	pci_iounmap(pci, card->uwbbase);
+error_iomap:
+	release_mem_region(pci_resource_start(pci, 0), UWBCAPDATA_SIZE(card->n_caps));
+error_request_memregion:
+	kfree(card);
+error_kzalloc:
+error_ncaps:
+error_dma:
+	pci_disable_msi(pci);
+	pci_disable_device(pci);
+error:
+	return err;
+}
+
+static void whci_remove(struct pci_dev *pci)
+{
+	struct whci_card *card = pci_get_drvdata(pci);
+	int n;
+
+	pci_set_drvdata(pci, NULL);
+	/* Unregister each capability in reverse (so the master device
+	 * is unregistered last). */
+	for (n = card->n_caps; n >= 0 ; n--)
+		whci_del_cap(card, n);
+	pci_iounmap(pci, card->uwbbase);
+	release_mem_region(pci_resource_start(pci, 0), UWBCAPDATA_SIZE(card->n_caps));
+	kfree(card);
+	pci_disable_msi(pci);
+	pci_disable_device(pci);
+}
+
+static struct pci_device_id whci_id_table[] = {
+	{ PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
+	{ 0 },
+};
+MODULE_DEVICE_TABLE(pci, whci_id_table);
+
+
+static struct pci_driver whci_driver = {
+	.name     = "whci",
+	.id_table = whci_id_table,
+	.probe    = whci_probe,
+	.remove   = whci_remove,
+};
+
+static int __init whci_init(void)
+{
+	return pci_register_driver(&whci_driver);
+}
+
+static void __exit whci_exit(void)
+{
+	pci_unregister_driver(&whci_driver);
+}
+
+module_init(whci_init);
+module_exit(whci_exit);
+
+MODULE_DESCRIPTION("WHCI UWB Multi-interface Controller enumerator");
+MODULE_AUTHOR("Cambridge Silicon Radio Ltd.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/wlp/Makefile b/drivers/uwb/wlp/Makefile
new file mode 100644
index 0000000..c72c11d
--- /dev/null
+++ b/drivers/uwb/wlp/Makefile
@@ -0,0 +1,10 @@
+obj-$(CONFIG_UWB_WLP) := wlp.o
+
+wlp-objs :=	\
+	driver.o	\
+	eda.o		\
+	messages.o	\
+	sysfs.o		\
+	txrx.o		\
+	wlp-lc.o	\
+	wss-lc.o
diff --git a/drivers/uwb/wlp/driver.c b/drivers/uwb/wlp/driver.c
new file mode 100644
index 0000000..cb8d699
--- /dev/null
+++ b/drivers/uwb/wlp/driver.c
@@ -0,0 +1,43 @@
+/*
+ * WiMedia Logical Link Control Protocol (WLP)
+ *
+ * Copyright (C) 2007 Intel Corporation
+ * Reinette Chatre <reinette.chatre@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Life cycle of WLP substack
+ *
+ * FIXME: Docs
+ */
+
+#include <linux/module.h>
+
+static int __init wlp_subsys_init(void)
+{
+	return 0;
+}
+module_init(wlp_subsys_init);
+
+static void __exit wlp_subsys_exit(void)
+{
+	return;
+}
+module_exit(wlp_subsys_exit);
+
+MODULE_AUTHOR("Reinette Chatre <reinette.chatre@intel.com>");
+MODULE_DESCRIPTION("WiMedia Logical Link Control Protocol (WLP)");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/wlp/eda.c b/drivers/uwb/wlp/eda.c
new file mode 100644
index 0000000..cdfe8df
--- /dev/null
+++ b/drivers/uwb/wlp/eda.c
@@ -0,0 +1,449 @@
+/*
+ * WUSB Wire Adapter: WLP interface
+ * Ethernet to device address cache
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * We need to be able to map ethernet addresses to device addresses
+ * and back because there is not explicit relationship between the eth
+ * addresses used in the ETH frames and the device addresses (no, it
+ * would not have been simpler to force as ETH address the MBOA MAC
+ * address...no, not at all :).
+ *
+ * A device has one MBOA MAC address and one device address. It is possible
+ * for a device to have more than one virtual MAC address (although a
+ * virtual address can be the same as the MBOA MAC address). The device
+ * address is guaranteed to be unique among the devices in the extended
+ * beacon group (see ECMA 17.1.1). We thus use the device address as index
+ * to this cache. We do allow searching based on virtual address as this
+ * is how Ethernet frames will be addressed.
+ *
+ * We need to support virtual EUI-48. Although, right now the virtual
+ * EUI-48 will always be the same as the MAC SAP address. The EDA cache
+ * entry thus contains a MAC SAP address as well as the virtual address
+ * (used to map the network stack address to a neighbor). When we move
+ * to support more than one virtual MAC on a host then this organization
+ * will have to change. Perhaps a neighbor has a list of WSSs, each with a
+ * tag and virtual EUI-48.
+ *
+ * On data transmission
+ * it is used to determine if the neighbor is connected and what WSS it
+ * belongs to. With this we know what tag to add to the WLP frame. Storing
+ * the WSS in the EDA cache may be overkill because we only support one
+ * WSS. Hopefully we will support more than one WSS at some point.
+ * On data reception it is used to determine the WSS based on
+ * the tag and address of the transmitting neighbor.
+ */
+
+#define D_LOCAL 5
+#include <linux/netdevice.h>
+#include <linux/uwb/debug.h>
+#include <linux/etherdevice.h>
+#include <linux/wlp.h>
+#include "wlp-internal.h"
+
+
+/* FIXME: cache is not purged, only on device close */
+
+/* FIXME: does not scale, change to dynamic array */
+
+/*
+ * Initialize the EDA cache
+ *
+ * @returns 0 if ok, < 0 errno code on error
+ *
+ * Call when the interface is being brought up
+ *
+ * NOTE: Keep it as a separate function as the implementation will
+ *       change and be more complex.
+ */
+void wlp_eda_init(struct wlp_eda *eda)
+{
+	INIT_LIST_HEAD(&eda->cache);
+	spin_lock_init(&eda->lock);
+}
+
+/*
+ * Release the EDA cache
+ *
+ * @returns 0 if ok, < 0 errno code on error
+ *
+ * Called when the interface is brought down
+ */
+void wlp_eda_release(struct wlp_eda *eda)
+{
+	unsigned long flags;
+	struct wlp_eda_node *itr, *next;
+
+	spin_lock_irqsave(&eda->lock, flags);
+	list_for_each_entry_safe(itr, next, &eda->cache, list_node) {
+		list_del(&itr->list_node);
+		kfree(itr);
+	}
+	spin_unlock_irqrestore(&eda->lock, flags);
+}
+
+/*
+ * Add an address mapping
+ *
+ * @returns 0 if ok, < 0 errno code on error
+ *
+ * An address mapping is initially created when the neighbor device is seen
+ * for the first time (it is "onair"). At this time the neighbor is not
+ * connected or associated with a WSS so we only populate the Ethernet and
+ * Device address fields.
+ *
+ */
+int wlp_eda_create_node(struct wlp_eda *eda,
+			const unsigned char eth_addr[ETH_ALEN],
+			const struct uwb_dev_addr *dev_addr)
+{
+	int result = 0;
+	struct wlp_eda_node *itr;
+	unsigned long flags;
+
+	BUG_ON(dev_addr == NULL || eth_addr == NULL);
+	spin_lock_irqsave(&eda->lock, flags);
+	list_for_each_entry(itr, &eda->cache, list_node) {
+		if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) {
+			printk(KERN_ERR "EDA cache already contains entry "
+			       "for neighbor %02x:%02x\n",
+			       dev_addr->data[1], dev_addr->data[0]);
+			result = -EEXIST;
+			goto out_unlock;
+		}
+	}
+	itr = kzalloc(sizeof(*itr), GFP_ATOMIC);
+	if (itr != NULL) {
+		memcpy(itr->eth_addr, eth_addr, sizeof(itr->eth_addr));
+		itr->dev_addr = *dev_addr;
+		list_add(&itr->list_node, &eda->cache);
+	} else
+		result = -ENOMEM;
+out_unlock:
+	spin_unlock_irqrestore(&eda->lock, flags);
+	return result;
+}
+
+/*
+ * Remove entry from EDA cache
+ *
+ * This is done when the device goes off air.
+ */
+void wlp_eda_rm_node(struct wlp_eda *eda, const struct uwb_dev_addr *dev_addr)
+{
+	struct wlp_eda_node *itr, *next;
+	unsigned long flags;
+
+	spin_lock_irqsave(&eda->lock, flags);
+	list_for_each_entry_safe(itr, next, &eda->cache, list_node) {
+		if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) {
+			list_del(&itr->list_node);
+			kfree(itr);
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&eda->lock, flags);
+}
+
+/*
+ * Update an address mapping
+ *
+ * @returns 0 if ok, < 0 errno code on error
+ */
+int wlp_eda_update_node(struct wlp_eda *eda,
+			const struct uwb_dev_addr *dev_addr,
+			struct wlp_wss *wss,
+			const unsigned char virt_addr[ETH_ALEN],
+			const u8 tag, const enum wlp_wss_connect state)
+{
+	int result = -ENOENT;
+	struct wlp_eda_node *itr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&eda->lock, flags);
+	list_for_each_entry(itr, &eda->cache, list_node) {
+		if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) {
+			/* Found it, update it */
+			itr->wss = wss;
+			memcpy(itr->virt_addr, virt_addr,
+			       sizeof(itr->virt_addr));
+			itr->tag = tag;
+			itr->state = state;
+			result = 0;
+			goto out_unlock;
+		}
+	}
+	/* Not found */
+out_unlock:
+	spin_unlock_irqrestore(&eda->lock, flags);
+	return result;
+}
+
+/*
+ * Update only state field of an address mapping
+ *
+ * @returns 0 if ok, < 0 errno code on error
+ */
+int wlp_eda_update_node_state(struct wlp_eda *eda,
+			      const struct uwb_dev_addr *dev_addr,
+			      const enum wlp_wss_connect state)
+{
+	int result = -ENOENT;
+	struct wlp_eda_node *itr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&eda->lock, flags);
+	list_for_each_entry(itr, &eda->cache, list_node) {
+		if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) {
+			/* Found it, update it */
+			itr->state = state;
+			result = 0;
+			goto out_unlock;
+		}
+	}
+	/* Not found */
+out_unlock:
+	spin_unlock_irqrestore(&eda->lock, flags);
+	return result;
+}
+
+/*
+ * Return contents of EDA cache entry
+ *
+ * @dev_addr: index to EDA cache
+ * @eda_entry: pointer to where contents of EDA cache will be copied
+ */
+int wlp_copy_eda_node(struct wlp_eda *eda, struct uwb_dev_addr *dev_addr,
+		      struct wlp_eda_node *eda_entry)
+{
+	int result = -ENOENT;
+	struct wlp_eda_node *itr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&eda->lock, flags);
+	list_for_each_entry(itr, &eda->cache, list_node) {
+		if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) {
+			*eda_entry = *itr;
+			result = 0;
+			goto out_unlock;
+		}
+	}
+	/* Not found */
+out_unlock:
+	spin_unlock_irqrestore(&eda->lock, flags);
+	return result;
+}
+
+/*
+ * Execute function for every element in the cache
+ *
+ * @function: function to execute on element of cache (must be atomic)
+ * @priv:     private data of function
+ * @returns:  result of first function that failed, or last function
+ *            executed if no function failed.
+ *
+ * Stop executing when function returns error for any element in cache.
+ *
+ * IMPORTANT: We are using a spinlock here: the function executed on each
+ * element has to be atomic.
+ */
+int wlp_eda_for_each(struct wlp_eda *eda, wlp_eda_for_each_f function,
+		     void *priv)
+{
+	int result = 0;
+	struct wlp *wlp = container_of(eda, struct wlp, eda);
+	struct wlp_eda_node *entry;
+	unsigned long flags;
+
+	spin_lock_irqsave(&eda->lock, flags);
+	list_for_each_entry(entry, &eda->cache, list_node) {
+		result = (*function)(wlp, entry, priv);
+		if (result < 0)
+			break;
+	}
+	spin_unlock_irqrestore(&eda->lock, flags);
+	return result;
+}
+
+/*
+ * Execute function for single element in the cache (return dev addr)
+ *
+ * @virt_addr: index into EDA cache used to determine which element to
+ *             execute the function on
+ * @dev_addr: device address of element in cache will be returned using
+ *            @dev_addr
+ * @function: function to execute on element of cache (must be atomic)
+ * @priv:     private data of function
+ * @returns:  result of function
+ *
+ * IMPORTANT: We are using a spinlock here: the function executed on the
+ * element has to be atomic.
+ */
+int wlp_eda_for_virtual(struct wlp_eda *eda,
+			const unsigned char virt_addr[ETH_ALEN],
+			struct uwb_dev_addr *dev_addr,
+			wlp_eda_for_each_f function,
+			void *priv)
+{
+	int result = 0;
+	struct wlp *wlp = container_of(eda, struct wlp, eda);
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct wlp_eda_node *itr;
+	unsigned long flags;
+	int found = 0;
+
+	spin_lock_irqsave(&eda->lock, flags);
+	list_for_each_entry(itr, &eda->cache, list_node) {
+		if (!memcmp(itr->virt_addr, virt_addr,
+			   sizeof(itr->virt_addr))) {
+			d_printf(6, dev, "EDA: looking for "
+			       "%02x:%02x:%02x:%02x:%02x:%02x hit %02x:%02x "
+			       "wss %p tag 0x%02x state %u\n",
+			       virt_addr[0], virt_addr[1],
+			       virt_addr[2], virt_addr[3],
+			       virt_addr[4], virt_addr[5],
+			       itr->dev_addr.data[1],
+			       itr->dev_addr.data[0], itr->wss,
+			       itr->tag, itr->state);
+			result = (*function)(wlp, itr, priv);
+			*dev_addr = itr->dev_addr;
+			found = 1;
+			break;
+		} else
+			d_printf(6, dev, "EDA: looking for "
+			       "%02x:%02x:%02x:%02x:%02x:%02x "
+			       "against "
+			       "%02x:%02x:%02x:%02x:%02x:%02x miss\n",
+			       virt_addr[0], virt_addr[1],
+			       virt_addr[2], virt_addr[3],
+			       virt_addr[4], virt_addr[5],
+			       itr->virt_addr[0], itr->virt_addr[1],
+			       itr->virt_addr[2], itr->virt_addr[3],
+			       itr->virt_addr[4], itr->virt_addr[5]);
+	}
+	if (!found) {
+		if (printk_ratelimit())
+			dev_err(dev, "EDA: Eth addr %02x:%02x:%02x"
+				":%02x:%02x:%02x not found.\n",
+				virt_addr[0], virt_addr[1],
+				virt_addr[2], virt_addr[3],
+				virt_addr[4], virt_addr[5]);
+		result = -ENODEV;
+	}
+	spin_unlock_irqrestore(&eda->lock, flags);
+	return result;
+}
+
+static const char *__wlp_wss_connect_state[] = { "WLP_WSS_UNCONNECTED",
+					  "WLP_WSS_CONNECTED",
+					  "WLP_WSS_CONNECT_FAILED",
+};
+
+static const char *wlp_wss_connect_state_str(unsigned id)
+{
+	if (id >= ARRAY_SIZE(__wlp_wss_connect_state))
+		return "unknown WSS connection state";
+	return __wlp_wss_connect_state[id];
+}
+
+/*
+ * View EDA cache from user space
+ *
+ * A debugging feature to give user visibility into the EDA cache. Also
+ * used to display members of WSS to user (called from wlp_wss_members_show())
+ */
+ssize_t wlp_eda_show(struct wlp *wlp, char *buf)
+{
+	ssize_t result = 0;
+	struct wlp_eda_node *entry;
+	unsigned long flags;
+	struct wlp_eda *eda = &wlp->eda;
+	spin_lock_irqsave(&eda->lock, flags);
+	result = scnprintf(buf, PAGE_SIZE, "#eth_addr dev_addr wss_ptr "
+			   "tag state virt_addr\n");
+	list_for_each_entry(entry, &eda->cache, list_node) {
+		result += scnprintf(buf + result, PAGE_SIZE - result,
+				    "%02x:%02x:%02x:%02x:%02x:%02x %02x:%02x "
+				    "%p 0x%02x %s "
+				    "%02x:%02x:%02x:%02x:%02x:%02x\n",
+				    entry->eth_addr[0], entry->eth_addr[1],
+				    entry->eth_addr[2], entry->eth_addr[3],
+				    entry->eth_addr[4], entry->eth_addr[5],
+				    entry->dev_addr.data[1],
+				    entry->dev_addr.data[0], entry->wss,
+				    entry->tag,
+				    wlp_wss_connect_state_str(entry->state),
+				    entry->virt_addr[0], entry->virt_addr[1],
+				    entry->virt_addr[2], entry->virt_addr[3],
+				    entry->virt_addr[4], entry->virt_addr[5]);
+		if (result >= PAGE_SIZE)
+			break;
+	}
+	spin_unlock_irqrestore(&eda->lock, flags);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wlp_eda_show);
+
+/*
+ * Add new EDA cache entry based on user input in sysfs
+ *
+ * Should only be used for debugging.
+ *
+ * The WSS is assumed to be the only WSS supported. This needs to be
+ * redesigned when we support more than one WSS.
+ */
+ssize_t wlp_eda_store(struct wlp *wlp, const char *buf, size_t size)
+{
+	ssize_t result;
+	struct wlp_eda *eda = &wlp->eda;
+	u8 eth_addr[6];
+	struct uwb_dev_addr dev_addr;
+	u8 tag;
+	unsigned state;
+
+	result = sscanf(buf, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx "
+			"%02hhx:%02hhx %02hhx %u\n",
+			&eth_addr[0], &eth_addr[1],
+			&eth_addr[2], &eth_addr[3],
+			&eth_addr[4], &eth_addr[5],
+			&dev_addr.data[1], &dev_addr.data[0], &tag, &state);
+	switch (result) {
+	case 6: /* no dev addr specified -- remove entry NOT IMPLEMENTED */
+		/*result = wlp_eda_rm(eda, eth_addr, &dev_addr);*/
+		result = -ENOSYS;
+		break;
+	case 10:
+		state = state >= 1 ? 1 : 0;
+		result = wlp_eda_create_node(eda, eth_addr, &dev_addr);
+		if (result < 0 && result != -EEXIST)
+			goto error;
+		/* Set virtual addr to be same as MAC */
+		result = wlp_eda_update_node(eda, &dev_addr, &wlp->wss,
+					     eth_addr, tag, state);
+		if (result < 0)
+			goto error;
+		break;
+	default: /* bad format */
+		result = -EINVAL;
+	}
+error:
+	return result < 0 ? result : size;
+}
+EXPORT_SYMBOL_GPL(wlp_eda_store);
diff --git a/drivers/uwb/wlp/messages.c b/drivers/uwb/wlp/messages.c
new file mode 100644
index 0000000..a64cb824
--- /dev/null
+++ b/drivers/uwb/wlp/messages.c
@@ -0,0 +1,1946 @@
+/*
+ * WiMedia Logical Link Control Protocol (WLP)
+ * Message construction and parsing
+ *
+ * Copyright (C) 2007 Intel Corporation
+ * Reinette Chatre <reinette.chatre@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#include <linux/wlp.h>
+#define D_LOCAL 6
+#include <linux/uwb/debug.h>
+#include "wlp-internal.h"
+
+static
+const char *__wlp_assoc_frame[] = {
+	[WLP_ASSOC_D1] = "WLP_ASSOC_D1",
+	[WLP_ASSOC_D2] = "WLP_ASSOC_D2",
+	[WLP_ASSOC_M1] = "WLP_ASSOC_M1",
+	[WLP_ASSOC_M2] = "WLP_ASSOC_M2",
+	[WLP_ASSOC_M3] = "WLP_ASSOC_M3",
+	[WLP_ASSOC_M4] = "WLP_ASSOC_M4",
+	[WLP_ASSOC_M5] = "WLP_ASSOC_M5",
+	[WLP_ASSOC_M6] = "WLP_ASSOC_M6",
+	[WLP_ASSOC_M7] = "WLP_ASSOC_M7",
+	[WLP_ASSOC_M8] = "WLP_ASSOC_M8",
+	[WLP_ASSOC_F0] = "WLP_ASSOC_F0",
+	[WLP_ASSOC_E1] = "WLP_ASSOC_E1",
+	[WLP_ASSOC_E2] = "WLP_ASSOC_E2",
+	[WLP_ASSOC_C1] = "WLP_ASSOC_C1",
+	[WLP_ASSOC_C2] = "WLP_ASSOC_C2",
+	[WLP_ASSOC_C3] = "WLP_ASSOC_C3",
+	[WLP_ASSOC_C4] = "WLP_ASSOC_C4",
+};
+
+static const char *wlp_assoc_frame_str(unsigned id)
+{
+	if (id >= ARRAY_SIZE(__wlp_assoc_frame))
+		return "unknown association frame";
+	return __wlp_assoc_frame[id];
+}
+
+static const char *__wlp_assc_error[] = {
+	"none",
+	"Authenticator Failure",
+	"Rogue activity suspected",
+	"Device busy",
+	"Setup Locked",
+	"Registrar not ready",
+	"Invalid WSS selection",
+	"Message timeout",
+	"Enrollment session timeout",
+	"Device password invalid",
+	"Unsupported version",
+	"Internal error",
+	"Undefined error",
+	"Numeric comparison failure",
+	"Waiting for user input",
+};
+
+static const char *wlp_assc_error_str(unsigned id)
+{
+	if (id >= ARRAY_SIZE(__wlp_assc_error))
+		return "unknown WLP association error";
+	return __wlp_assc_error[id];
+}
+
+static inline void wlp_set_attr_hdr(struct wlp_attr_hdr *hdr, unsigned type,
+				    size_t len)
+{
+	hdr->type = cpu_to_le16(type);
+	hdr->length = cpu_to_le16(len);
+}
+
+/*
+ * Populate fields of a constant sized attribute
+ *
+ * @returns: total size of attribute including size of new value
+ *
+ * We have two instances of this function (wlp_pset and wlp_set): one takes
+ * the value as a parameter, the other takes a pointer to the value as
+ * parameter. They thus only differ in how the value is assigned to the
+ * attribute.
+ *
+ * We use sizeof(*attr) - sizeof(struct wlp_attr_hdr) instead of
+ * sizeof(type) to be able to use this same code for the structures that
+ * contain 8bit enum values and be able to deal with pointer types.
+ */
+#define wlp_set(type, type_code, name)					\
+static size_t wlp_set_##name(struct wlp_attr_##name *attr, type value)	\
+{									\
+	d_fnstart(6, NULL, "(attribute %p)\n", attr);			\
+	wlp_set_attr_hdr(&attr->hdr, type_code,				\
+			 sizeof(*attr) - sizeof(struct wlp_attr_hdr));	\
+	attr->name = value;						\
+	d_dump(6, NULL, attr, sizeof(*attr));				\
+	d_fnend(6, NULL, "(attribute %p)\n", attr);			\
+	return sizeof(*attr);						\
+}
+
+#define wlp_pset(type, type_code, name)					\
+static size_t wlp_set_##name(struct wlp_attr_##name *attr, type value)	\
+{									\
+	d_fnstart(6, NULL, "(attribute %p)\n", attr);			\
+	wlp_set_attr_hdr(&attr->hdr, type_code,				\
+			 sizeof(*attr) - sizeof(struct wlp_attr_hdr));	\
+	attr->name = *value;						\
+	d_dump(6, NULL, attr, sizeof(*attr));				\
+	d_fnend(6, NULL, "(attribute %p)\n", attr);			\
+	return sizeof(*attr);						\
+}
+
+/**
+ * Populate fields of a variable attribute
+ *
+ * @returns: total size of attribute including size of new value
+ *
+ * Provided with a pointer to the memory area reserved for the
+ * attribute structure, the field is populated with the value. The
+ * reserved memory has to contain enough space for the value.
+ */
+#define wlp_vset(type, type_code, name)					\
+static size_t wlp_set_##name(struct wlp_attr_##name *attr, type value,	\
+				size_t len)				\
+{									\
+	d_fnstart(6, NULL, "(attribute %p)\n", attr);			\
+	wlp_set_attr_hdr(&attr->hdr, type_code, len);			\
+	memcpy(attr->name, value, len);					\
+	d_dump(6, NULL, attr, sizeof(*attr) + len);			\
+	d_fnend(6, NULL, "(attribute %p)\n", attr);			\
+	return sizeof(*attr) + len;					\
+}
+
+wlp_vset(char *, WLP_ATTR_DEV_NAME, dev_name)
+wlp_vset(char *, WLP_ATTR_MANUF, manufacturer)
+wlp_set(enum wlp_assoc_type, WLP_ATTR_MSG_TYPE, msg_type)
+wlp_vset(char *, WLP_ATTR_MODEL_NAME, model_name)
+wlp_vset(char *, WLP_ATTR_MODEL_NR, model_nr)
+wlp_vset(char *, WLP_ATTR_SERIAL, serial)
+wlp_vset(char *, WLP_ATTR_WSS_NAME, wss_name)
+wlp_pset(struct wlp_uuid *, WLP_ATTR_UUID_E, uuid_e)
+wlp_pset(struct wlp_uuid *, WLP_ATTR_UUID_R, uuid_r)
+wlp_pset(struct wlp_uuid *, WLP_ATTR_WSSID, wssid)
+wlp_pset(struct wlp_dev_type *, WLP_ATTR_PRI_DEV_TYPE, prim_dev_type)
+/*wlp_pset(struct wlp_dev_type *, WLP_ATTR_SEC_DEV_TYPE, sec_dev_type)*/
+wlp_set(u8, WLP_ATTR_WLP_VER, version)
+wlp_set(enum wlp_assc_error, WLP_ATTR_WLP_ASSC_ERR, wlp_assc_err)
+wlp_set(enum wlp_wss_sel_mthd, WLP_ATTR_WSS_SEL_MTHD, wss_sel_mthd)
+wlp_set(u8, WLP_ATTR_ACC_ENRL, accept_enrl)
+wlp_set(u8, WLP_ATTR_WSS_SEC_STAT, wss_sec_status)
+wlp_pset(struct uwb_mac_addr *, WLP_ATTR_WSS_BCAST, wss_bcast)
+wlp_pset(struct wlp_nonce *, WLP_ATTR_ENRL_NONCE, enonce)
+wlp_pset(struct wlp_nonce *, WLP_ATTR_REG_NONCE, rnonce)
+wlp_set(u8, WLP_ATTR_WSS_TAG, wss_tag)
+wlp_pset(struct uwb_mac_addr *, WLP_ATTR_WSS_VIRT, wss_virt)
+
+/**
+ * Fill in the WSS information attributes
+ *
+ * We currently only support one WSS, and this is assumed in this function
+ * that can populate only one WSS information attribute.
+ */
+static size_t wlp_set_wss_info(struct wlp_attr_wss_info *attr,
+			       struct wlp_wss *wss)
+{
+	size_t datalen;
+	void *ptr = attr->wss_info;
+	size_t used = sizeof(*attr);
+	d_fnstart(6, NULL, "(attribute %p)\n", attr);
+	datalen = sizeof(struct wlp_wss_info) + strlen(wss->name);
+	wlp_set_attr_hdr(&attr->hdr, WLP_ATTR_WSS_INFO, datalen);
+	used = wlp_set_wssid(ptr, &wss->wssid);
+	used += wlp_set_wss_name(ptr + used, wss->name, strlen(wss->name));
+	used += wlp_set_accept_enrl(ptr + used, wss->accept_enroll);
+	used += wlp_set_wss_sec_status(ptr + used, wss->secure_status);
+	used += wlp_set_wss_bcast(ptr + used, &wss->bcast);
+	d_dump(6, NULL, attr, sizeof(*attr) + datalen);
+	d_fnend(6, NULL, "(attribute %p, used %d)\n",
+		attr, (int)(sizeof(*attr) + used));
+	return sizeof(*attr) + used;
+}
+
+/**
+ * Verify attribute header
+ *
+ * @hdr:     Pointer to attribute header that will be verified.
+ * @type:    Expected attribute type.
+ * @len:     Expected length of attribute value (excluding header).
+ *
+ * Most attribute values have a known length even when they do have a
+ * length field. This knowledge can be used via this function to verify
+ * that the length field matches the expected value.
+ */
+static int wlp_check_attr_hdr(struct wlp *wlp, struct wlp_attr_hdr *hdr,
+		       enum wlp_attr_type type, unsigned len)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+
+	if (le16_to_cpu(hdr->type) != type) {
+		dev_err(dev, "WLP: unexpected header type. Expected "
+			"%u, got %u.\n", type, le16_to_cpu(hdr->type));
+		return -EINVAL;
+	}
+	if (le16_to_cpu(hdr->length) != len) {
+		dev_err(dev, "WLP: unexpected length in header. Expected "
+			"%u, got %u.\n", len, le16_to_cpu(hdr->length));
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
+ * Check if header of WSS information attribute valid
+ *
+ * @returns: length of WSS attributes (value of length attribute field) if
+ *             valid WSS information attribute found
+ *           -ENODATA if no WSS information attribute found
+ *           -EIO other error occured
+ *
+ * The WSS information attribute is optional. The function will be provided
+ * with a pointer to data that could _potentially_ be a WSS information
+ * attribute. If a valid WSS information attribute is found it will return
+ * 0, if no WSS information attribute is found it will return -ENODATA, and
+ * another error will be returned if it is a WSS information attribute, but
+ * some parsing failure occured.
+ */
+static int wlp_check_wss_info_attr_hdr(struct wlp *wlp,
+				       struct wlp_attr_hdr *hdr, size_t buflen)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	size_t len;
+	int result = 0;
+
+	if (buflen < sizeof(*hdr)) {
+		dev_err(dev, "WLP: Not enough space in buffer to parse"
+			" WSS information attribute header.\n");
+		result = -EIO;
+		goto out;
+	}
+	if (le16_to_cpu(hdr->type) != WLP_ATTR_WSS_INFO) {
+		/* WSS information is optional */
+		result = -ENODATA;
+		goto out;
+	}
+	len = le16_to_cpu(hdr->length);
+	if (buflen < sizeof(*hdr) + len) {
+		dev_err(dev, "WLP: Not enough space in buffer to parse "
+			"variable data. Got %d, expected %d.\n",
+			(int)buflen, (int)(sizeof(*hdr) + len));
+		result = -EIO;
+		goto out;
+	}
+	result = len;
+out:
+	return result;
+}
+
+
+/**
+ * Get value of attribute from fixed size attribute field.
+ *
+ * @attr:    Pointer to attribute field.
+ * @value:   Pointer to variable in which attribute value will be placed.
+ * @buflen:  Size of buffer in which attribute field (including header)
+ *           can be found.
+ * @returns: Amount of given buffer consumed by parsing for this attribute.
+ *
+ * The size and type of the value is known by the type of the attribute.
+ */
+#define wlp_get(type, type_code, name)					\
+ssize_t wlp_get_##name(struct wlp *wlp, struct wlp_attr_##name *attr,	\
+		      type *value, ssize_t buflen)			\
+{									\
+	struct device *dev = &wlp->rc->uwb_dev.dev;			\
+	if (buflen < 0)							\
+		return -EINVAL;						\
+	if (buflen < sizeof(*attr)) {					\
+		dev_err(dev, "WLP: Not enough space in buffer to parse"	\
+			" attribute field. Need %d, received %zu\n",	\
+			(int)sizeof(*attr), buflen);			\
+		return -EIO;						\
+	}								\
+	if (wlp_check_attr_hdr(wlp, &attr->hdr, type_code,		\
+			       sizeof(attr->name)) < 0) {		\
+		dev_err(dev, "WLP: Header verification failed. \n");	\
+		return -EINVAL;						\
+	}								\
+	*value = attr->name;						\
+	return sizeof(*attr);						\
+}
+
+#define wlp_get_sparse(type, type_code, name) \
+	static wlp_get(type, type_code, name)
+
+/**
+ * Get value of attribute from variable sized attribute field.
+ *
+ * @max:     The maximum size of this attribute. This value is dictated by
+ *           the maximum value from the WLP specification.
+ *
+ * @attr:    Pointer to attribute field.
+ * @value:   Pointer to variable that will contain the value. The memory
+ *           must already have been allocated for this value.
+ * @buflen:  Size of buffer in which attribute field (including header)
+ *           can be found.
+ * @returns: Amount of given bufferconsumed by parsing for this attribute.
+ */
+#define wlp_vget(type_val, type_code, name, max)			\
+static ssize_t wlp_get_##name(struct wlp *wlp,				\
+			      struct wlp_attr_##name *attr,		\
+			      type_val *value, ssize_t buflen)		\
+{									\
+	struct device *dev = &wlp->rc->uwb_dev.dev;			\
+	size_t len;							\
+	if (buflen < 0)							\
+		return -EINVAL;						\
+	if (buflen < sizeof(*attr)) {					\
+		dev_err(dev, "WLP: Not enough space in buffer to parse"	\
+			" header.\n");					\
+		return -EIO;						\
+	}								\
+	if (le16_to_cpu(attr->hdr.type) != type_code) {			\
+		dev_err(dev, "WLP: Unexpected attribute type. Got %u, "	\
+			"expected %u.\n", le16_to_cpu(attr->hdr.type),	\
+			type_code);					\
+		return -EINVAL;						\
+	}								\
+	len = le16_to_cpu(attr->hdr.length);				\
+	if (len > max) {						\
+		dev_err(dev, "WLP: Attribute larger than maximum "	\
+			"allowed. Received %zu, max is %d.\n", len,	\
+			(int)max);					\
+		return -EFBIG;						\
+	}								\
+	if (buflen < sizeof(*attr) + len) {				\
+		dev_err(dev, "WLP: Not enough space in buffer to parse "\
+			"variable data.\n");				\
+		return -EIO;						\
+	}								\
+	memcpy(value, (void *) attr + sizeof(*attr), len);		\
+	return sizeof(*attr) + len;					\
+}
+
+wlp_get(u8, WLP_ATTR_WLP_VER, version)
+wlp_get_sparse(enum wlp_wss_sel_mthd, WLP_ATTR_WSS_SEL_MTHD, wss_sel_mthd)
+wlp_get_sparse(struct wlp_dev_type, WLP_ATTR_PRI_DEV_TYPE, prim_dev_type)
+wlp_get_sparse(enum wlp_assc_error, WLP_ATTR_WLP_ASSC_ERR, wlp_assc_err)
+wlp_get_sparse(struct wlp_uuid, WLP_ATTR_UUID_E, uuid_e)
+wlp_get_sparse(struct wlp_uuid, WLP_ATTR_UUID_R, uuid_r)
+wlp_get(struct wlp_uuid, WLP_ATTR_WSSID, wssid)
+wlp_get_sparse(u8, WLP_ATTR_ACC_ENRL, accept_enrl)
+wlp_get_sparse(u8, WLP_ATTR_WSS_SEC_STAT, wss_sec_status)
+wlp_get_sparse(struct uwb_mac_addr, WLP_ATTR_WSS_BCAST, wss_bcast)
+wlp_get_sparse(u8, WLP_ATTR_WSS_TAG, wss_tag)
+wlp_get_sparse(struct uwb_mac_addr, WLP_ATTR_WSS_VIRT, wss_virt)
+wlp_get_sparse(struct wlp_nonce, WLP_ATTR_ENRL_NONCE, enonce)
+wlp_get_sparse(struct wlp_nonce, WLP_ATTR_REG_NONCE, rnonce)
+
+/* The buffers for the device info attributes can be found in the
+ * wlp_device_info struct. These buffers contain one byte more than the
+ * max allowed by the spec - this is done to be able to add the
+ * terminating \0 for user display. This terminating byte is not required
+ * in the actual attribute field (because it has a length field) so the
+ * maximum allowed for this value is one less than its size in the
+ * structure.
+ */
+wlp_vget(char, WLP_ATTR_WSS_NAME, wss_name,
+	 FIELD_SIZEOF(struct wlp_wss, name) - 1)
+wlp_vget(char, WLP_ATTR_DEV_NAME, dev_name,
+	 FIELD_SIZEOF(struct wlp_device_info, name) - 1)
+wlp_vget(char, WLP_ATTR_MANUF, manufacturer,
+	 FIELD_SIZEOF(struct wlp_device_info, manufacturer) - 1)
+wlp_vget(char, WLP_ATTR_MODEL_NAME, model_name,
+	 FIELD_SIZEOF(struct wlp_device_info, model_name) - 1)
+wlp_vget(char, WLP_ATTR_MODEL_NR, model_nr,
+	 FIELD_SIZEOF(struct wlp_device_info, model_nr) - 1)
+wlp_vget(char, WLP_ATTR_SERIAL, serial,
+	 FIELD_SIZEOF(struct wlp_device_info, serial) - 1)
+
+/**
+ * Retrieve WSS Name, Accept enroll, Secure status, Broadcast from WSS info
+ *
+ * @attr: pointer to WSS name attribute in WSS information attribute field
+ * @info: structure that will be populated with data from WSS information
+ *        field (WSS name, Accept enroll, secure status, broadcast address)
+ * @buflen: size of buffer
+ *
+ * Although the WSSID attribute forms part of the WSS info attribute it is
+ * retrieved separately and stored in a different location.
+ */
+static ssize_t wlp_get_wss_info_attrs(struct wlp *wlp,
+				      struct wlp_attr_hdr *attr,
+				      struct wlp_wss_tmp_info *info,
+				      ssize_t buflen)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	void *ptr = attr;
+	size_t used = 0;
+	ssize_t result = -EINVAL;
+
+	d_printf(6, dev, "WLP: WSS info: Retrieving WSS name\n");
+	result = wlp_get_wss_name(wlp, ptr, info->name, buflen);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain WSS name from "
+			"WSS info in D2 message.\n");
+		goto error_parse;
+	}
+	used += result;
+	d_printf(6, dev, "WLP: WSS info: Retrieving accept enroll\n");
+	result = wlp_get_accept_enrl(wlp, ptr + used, &info->accept_enroll,
+				     buflen - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain accepting "
+			"enrollment from WSS info in D2 message.\n");
+		goto error_parse;
+	}
+	if (info->accept_enroll != 0 && info->accept_enroll != 1) {
+		dev_err(dev, "WLP: invalid value for accepting "
+			"enrollment in D2 message.\n");
+		result = -EINVAL;
+		goto error_parse;
+	}
+	used += result;
+	d_printf(6, dev, "WLP: WSS info: Retrieving secure status\n");
+	result = wlp_get_wss_sec_status(wlp, ptr + used, &info->sec_status,
+					buflen - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain secure "
+			"status from WSS info in D2 message.\n");
+		goto error_parse;
+	}
+	if (info->sec_status != 0 && info->sec_status != 1) {
+		dev_err(dev, "WLP: invalid value for secure "
+			"status in D2 message.\n");
+		result = -EINVAL;
+		goto error_parse;
+	}
+	used += result;
+	d_printf(6, dev, "WLP: WSS info: Retrieving broadcast\n");
+	result = wlp_get_wss_bcast(wlp, ptr + used, &info->bcast,
+				   buflen - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain broadcast "
+			"address from WSS info in D2 message.\n");
+		goto error_parse;
+	}
+	used += result;
+	result = used;
+error_parse:
+	return result;
+}
+
+/**
+ * Create a new WSSID entry for the neighbor, allocate temporary storage
+ *
+ * Each neighbor can have many WSS active. We maintain a list of WSSIDs
+ * advertised by neighbor. During discovery we also cache information about
+ * these WSS in temporary storage.
+ *
+ * The temporary storage will be removed after it has been used (eg.
+ * displayed to user), the wssid element will be removed from the list when
+ * the neighbor is rediscovered or when it disappears.
+ */
+static struct wlp_wssid_e *wlp_create_wssid_e(struct wlp *wlp,
+					      struct wlp_neighbor_e *neighbor)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct wlp_wssid_e *wssid_e;
+
+	wssid_e = kzalloc(sizeof(*wssid_e), GFP_KERNEL);
+	if (wssid_e == NULL) {
+		dev_err(dev, "WLP: unable to allocate memory "
+			"for WSS information.\n");
+		goto error_alloc;
+	}
+	wssid_e->info = kzalloc(sizeof(struct wlp_wss_tmp_info), GFP_KERNEL);
+	if (wssid_e->info == NULL) {
+		dev_err(dev, "WLP: unable to allocate memory "
+			"for temporary WSS information.\n");
+		kfree(wssid_e);
+		wssid_e = NULL;
+		goto error_alloc;
+	}
+	list_add(&wssid_e->node, &neighbor->wssid);
+error_alloc:
+	return wssid_e;
+}
+
+/**
+ * Parse WSS information attribute
+ *
+ * @attr: pointer to WSS information attribute header
+ * @buflen: size of buffer in which WSS information attribute appears
+ * @wssid: will place wssid from WSS info attribute in this location
+ * @wss_info: will place other information from WSS information attribute
+ * in this location
+ *
+ * memory for @wssid and @wss_info must be allocated when calling this
+ */
+static ssize_t wlp_get_wss_info(struct wlp *wlp, struct wlp_attr_wss_info *attr,
+				size_t buflen, struct wlp_uuid *wssid,
+				struct wlp_wss_tmp_info *wss_info)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	ssize_t result;
+	size_t len;
+	size_t used = 0;
+	void *ptr;
+
+	result = wlp_check_wss_info_attr_hdr(wlp, (struct wlp_attr_hdr *)attr,
+					     buflen);
+	if (result < 0)
+		goto out;
+	len = result;
+	used = sizeof(*attr);
+	ptr = attr;
+	d_printf(6, dev, "WLP: WSS info: Retrieving WSSID\n");
+	result = wlp_get_wssid(wlp, ptr + used, wssid, buflen - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain WSSID from WSS info.\n");
+		goto out;
+	}
+	used += result;
+	result = wlp_get_wss_info_attrs(wlp, ptr + used, wss_info,
+					buflen - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain WSS information "
+			"from WSS information attributes. \n");
+		goto out;
+	}
+	used += result;
+	if (len + sizeof(*attr) != used) {
+		dev_err(dev, "WLP: Amount of data parsed does not "
+			"match length field. Parsed %zu, length "
+			"field %zu. \n", used, len);
+		result = -EINVAL;
+		goto out;
+	}
+	result = used;
+	d_printf(6, dev, "WLP: Successfully parsed WLP information "
+		 "attribute. used %zu bytes\n", used);
+out:
+	return result;
+}
+
+/**
+ * Retrieve WSS info from association frame
+ *
+ * @attr:     pointer to WSS information attribute
+ * @neighbor: ptr to neighbor being discovered, NULL if enrollment in
+ *            progress
+ * @wss:      ptr to WSS being enrolled in, NULL if discovery in progress
+ * @buflen:   size of buffer in which WSS information appears
+ *
+ * The WSS information attribute appears in the D2 association message.
+ * This message is used in two ways: to discover all neighbors or to enroll
+ * into a WSS activated by a neighbor. During discovery we only want to
+ * store the WSS info in a cache, to be deleted right after it has been
+ * used (eg. displayed to the user). During enrollment we store the WSS
+ * information for the lifetime of enrollment.
+ *
+ * During discovery we are interested in all WSS information, during
+ * enrollment we are only interested in the WSS being enrolled in. Even so,
+ * when in enrollment we keep parsing the message after finding the WSS of
+ * interest, this simplifies the calling routine in that it can be sure
+ * that all WSS information attributes have been parsed out of the message.
+ *
+ * Association frame is process with nbmutex held. The list access is safe.
+ */
+static ssize_t wlp_get_all_wss_info(struct wlp *wlp,
+				    struct wlp_attr_wss_info *attr,
+				    struct wlp_neighbor_e *neighbor,
+				    struct wlp_wss *wss, ssize_t buflen)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	size_t used = 0;
+	ssize_t result = -EINVAL;
+	struct wlp_attr_wss_info *cur;
+	struct wlp_uuid wssid;
+	struct wlp_wss_tmp_info wss_info;
+	unsigned enroll; /* 0 - discovery to cache, 1 - enrollment */
+	struct wlp_wssid_e *wssid_e;
+	char buf[WLP_WSS_UUID_STRSIZE];
+
+	d_fnstart(6, dev, "wlp %p, attr %p, neighbor %p, wss %p, buflen %d \n",
+		  wlp, attr, neighbor, wss, (int)buflen);
+	if (buflen < 0)
+		goto out;
+
+	if (neighbor != NULL && wss == NULL)
+		enroll = 0; /* discovery */
+	else if (wss != NULL && neighbor == NULL)
+		enroll = 1; /* enrollment */
+	else
+		goto out;
+
+	cur = attr;
+	while (buflen - used > 0) {
+		memset(&wss_info, 0, sizeof(wss_info));
+		cur = (void *)cur + used;
+		result = wlp_get_wss_info(wlp, cur, buflen - used, &wssid,
+					  &wss_info);
+		if (result == -ENODATA) {
+			result = used;
+			goto out;
+		} else if (result < 0) {
+			dev_err(dev, "WLP: Unable to parse WSS information "
+				"from WSS information attribute. \n");
+			result = -EINVAL;
+			goto error_parse;
+		}
+		if (enroll && !memcmp(&wssid, &wss->wssid, sizeof(wssid))) {
+			if (wss_info.accept_enroll != 1) {
+				dev_err(dev, "WLP: Requested WSS does "
+					"not accept enrollment.\n");
+				result = -EINVAL;
+				goto out;
+			}
+			memcpy(wss->name, wss_info.name, sizeof(wss->name));
+			wss->bcast = wss_info.bcast;
+			wss->secure_status = wss_info.sec_status;
+			wss->accept_enroll = wss_info.accept_enroll;
+			wss->state = WLP_WSS_STATE_PART_ENROLLED;
+			wlp_wss_uuid_print(buf, sizeof(buf), &wssid);
+			d_printf(2, dev, "WLP: Found WSS %s. Enrolling.\n",
+				 buf);
+		} else {
+			wssid_e = wlp_create_wssid_e(wlp, neighbor);
+			if (wssid_e == NULL) {
+				dev_err(dev, "WLP: Cannot create new WSSID "
+					"entry for neighbor %02x:%02x.\n",
+					neighbor->uwb_dev->dev_addr.data[1],
+					neighbor->uwb_dev->dev_addr.data[0]);
+				result = -ENOMEM;
+				goto out;
+			}
+			wssid_e->wssid = wssid;
+			*wssid_e->info = wss_info;
+		}
+		used += result;
+	}
+	result = used;
+error_parse:
+	if (result < 0 && !enroll) /* this was a discovery */
+		wlp_remove_neighbor_tmp_info(neighbor);
+out:
+	d_fnend(6, dev, "wlp %p, attr %p, neighbor %p, wss %p, buflen %d, "
+		"result %d \n", wlp, attr, neighbor, wss, (int)buflen,
+		(int)result);
+	return result;
+
+}
+
+/**
+ * Parse WSS information attributes into cache for discovery
+ *
+ * @attr: the first WSS information attribute in message
+ * @neighbor: the neighbor whose cache will be populated
+ * @buflen: size of the input buffer
+ */
+static ssize_t wlp_get_wss_info_to_cache(struct wlp *wlp,
+					 struct wlp_attr_wss_info *attr,
+					 struct wlp_neighbor_e *neighbor,
+					 ssize_t buflen)
+{
+	return wlp_get_all_wss_info(wlp, attr, neighbor, NULL, buflen);
+}
+
+/**
+ * Parse WSS information attributes into WSS struct for enrollment
+ *
+ * @attr: the first WSS information attribute in message
+ * @wss: the WSS that will be enrolled
+ * @buflen: size of the input buffer
+ */
+static ssize_t wlp_get_wss_info_to_enroll(struct wlp *wlp,
+					  struct wlp_attr_wss_info *attr,
+					  struct wlp_wss *wss, ssize_t buflen)
+{
+	return wlp_get_all_wss_info(wlp, attr, NULL, wss, buflen);
+}
+
+/**
+ * Construct a D1 association frame
+ *
+ * We use the radio control functions to determine the values of the device
+ * properties. These are of variable length and the total space needed is
+ * tallied first before we start constructing the message. The radio
+ * control functions return strings that are terminated with \0. This
+ * character should not be included in the message (there is a length field
+ * accompanying it in the attribute).
+ */
+static int wlp_build_assoc_d1(struct wlp *wlp, struct wlp_wss *wss,
+			      struct sk_buff **skb)
+{
+
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	int result = 0;
+	struct wlp_device_info *info;
+	size_t used = 0;
+	struct wlp_frame_assoc *_d1;
+	struct sk_buff *_skb;
+	void *d1_itr;
+
+	d_fnstart(6, dev, "wlp %p\n", wlp);
+	if (wlp->dev_info == NULL) {
+		result = __wlp_setup_device_info(wlp);
+		if (result < 0) {
+			dev_err(dev, "WLP: Unable to setup device "
+				"information for D1 message.\n");
+			goto error;
+		}
+	}
+	info = wlp->dev_info;
+	d_printf(6, dev, "Local properties:\n"
+		 "Device name (%d bytes): %s\n"
+		 "Model name (%d bytes): %s\n"
+		 "Manufacturer (%d bytes): %s\n"
+		 "Model number (%d bytes): %s\n"
+		 "Serial number (%d bytes): %s\n"
+		 "Primary device type: \n"
+		 " Category: %d \n"
+		 " OUI: %02x:%02x:%02x \n"
+		 " OUI Subdivision: %u \n",
+		 (int)strlen(info->name), info->name,
+		 (int)strlen(info->model_name), info->model_name,
+		 (int)strlen(info->manufacturer), info->manufacturer,
+		 (int)strlen(info->model_nr),  info->model_nr,
+		 (int)strlen(info->serial), info->serial,
+		 info->prim_dev_type.category,
+		 info->prim_dev_type.OUI[0], info->prim_dev_type.OUI[1],
+		 info->prim_dev_type.OUI[2], info->prim_dev_type.OUIsubdiv);
+	_skb = dev_alloc_skb(sizeof(*_d1)
+		      + sizeof(struct wlp_attr_uuid_e)
+		      + sizeof(struct wlp_attr_wss_sel_mthd)
+		      + sizeof(struct wlp_attr_dev_name)
+		      + strlen(info->name)
+		      + sizeof(struct wlp_attr_manufacturer)
+		      + strlen(info->manufacturer)
+		      + sizeof(struct wlp_attr_model_name)
+		      + strlen(info->model_name)
+		      + sizeof(struct wlp_attr_model_nr)
+		      + strlen(info->model_nr)
+		      + sizeof(struct wlp_attr_serial)
+		      + strlen(info->serial)
+		      + sizeof(struct wlp_attr_prim_dev_type)
+		      + sizeof(struct wlp_attr_wlp_assc_err));
+	if (_skb == NULL) {
+		dev_err(dev, "WLP: Cannot allocate memory for association "
+			"message.\n");
+		result = -ENOMEM;
+		goto error;
+	}
+	_d1 = (void *) _skb->data;
+	d_printf(6, dev, "D1 starts at %p \n", _d1);
+	_d1->hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID);
+	_d1->hdr.type = WLP_FRAME_ASSOCIATION;
+	_d1->type = WLP_ASSOC_D1;
+
+	wlp_set_version(&_d1->version, WLP_VERSION);
+	wlp_set_msg_type(&_d1->msg_type, WLP_ASSOC_D1);
+	d1_itr = _d1->attr;
+	used = wlp_set_uuid_e(d1_itr, &wlp->uuid);
+	used += wlp_set_wss_sel_mthd(d1_itr + used, WLP_WSS_REG_SELECT);
+	used += wlp_set_dev_name(d1_itr + used, info->name,
+				 strlen(info->name));
+	used += wlp_set_manufacturer(d1_itr + used, info->manufacturer,
+				     strlen(info->manufacturer));
+	used += wlp_set_model_name(d1_itr + used, info->model_name,
+				   strlen(info->model_name));
+	used += wlp_set_model_nr(d1_itr + used, info->model_nr,
+				 strlen(info->model_nr));
+	used += wlp_set_serial(d1_itr + used, info->serial,
+			       strlen(info->serial));
+	used += wlp_set_prim_dev_type(d1_itr + used, &info->prim_dev_type);
+	used += wlp_set_wlp_assc_err(d1_itr + used, WLP_ASSOC_ERROR_NONE);
+	skb_put(_skb, sizeof(*_d1) + used);
+	d_printf(6, dev, "D1 message:\n");
+	d_dump(6, dev, _d1, sizeof(*_d1)
+		     + sizeof(struct wlp_attr_uuid_e)
+		     + sizeof(struct wlp_attr_wss_sel_mthd)
+		     + sizeof(struct wlp_attr_dev_name)
+		     + strlen(info->name)
+		     + sizeof(struct wlp_attr_manufacturer)
+		     + strlen(info->manufacturer)
+		     + sizeof(struct wlp_attr_model_name)
+		     + strlen(info->model_name)
+		     + sizeof(struct wlp_attr_model_nr)
+		     + strlen(info->model_nr)
+		     + sizeof(struct wlp_attr_serial)
+		     + strlen(info->serial)
+		     + sizeof(struct wlp_attr_prim_dev_type)
+		     + sizeof(struct wlp_attr_wlp_assc_err));
+	*skb = _skb;
+error:
+	d_fnend(6, dev, "wlp %p, result = %d\n", wlp, result);
+	return result;
+}
+
+/**
+ * Construct a D2 association frame
+ *
+ * We use the radio control functions to determine the values of the device
+ * properties. These are of variable length and the total space needed is
+ * tallied first before we start constructing the message. The radio
+ * control functions return strings that are terminated with \0. This
+ * character should not be included in the message (there is a length field
+ * accompanying it in the attribute).
+ */
+static
+int wlp_build_assoc_d2(struct wlp *wlp, struct wlp_wss *wss,
+		       struct sk_buff **skb, struct wlp_uuid *uuid_e)
+{
+
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	int result = 0;
+	struct wlp_device_info *info;
+	size_t used = 0;
+	struct wlp_frame_assoc *_d2;
+	struct sk_buff *_skb;
+	void *d2_itr;
+	size_t mem_needed;
+
+	d_fnstart(6, dev, "wlp %p\n", wlp);
+	if (wlp->dev_info == NULL) {
+		result = __wlp_setup_device_info(wlp);
+		if (result < 0) {
+			dev_err(dev, "WLP: Unable to setup device "
+				"information for D2 message.\n");
+			goto error;
+		}
+	}
+	info = wlp->dev_info;
+	d_printf(6, dev, "Local properties:\n"
+		 "Device name (%d bytes): %s\n"
+		 "Model name (%d bytes): %s\n"
+		 "Manufacturer (%d bytes): %s\n"
+		 "Model number (%d bytes): %s\n"
+		 "Serial number (%d bytes): %s\n"
+		 "Primary device type: \n"
+		 " Category: %d \n"
+		 " OUI: %02x:%02x:%02x \n"
+		 " OUI Subdivision: %u \n",
+		 (int)strlen(info->name), info->name,
+		 (int)strlen(info->model_name), info->model_name,
+		 (int)strlen(info->manufacturer), info->manufacturer,
+		 (int)strlen(info->model_nr),  info->model_nr,
+		 (int)strlen(info->serial), info->serial,
+		 info->prim_dev_type.category,
+		 info->prim_dev_type.OUI[0], info->prim_dev_type.OUI[1],
+		 info->prim_dev_type.OUI[2], info->prim_dev_type.OUIsubdiv);
+	mem_needed = sizeof(*_d2)
+		      + sizeof(struct wlp_attr_uuid_e)
+		      + sizeof(struct wlp_attr_uuid_r)
+		      + sizeof(struct wlp_attr_dev_name)
+		      + strlen(info->name)
+		      + sizeof(struct wlp_attr_manufacturer)
+		      + strlen(info->manufacturer)
+		      + sizeof(struct wlp_attr_model_name)
+		      + strlen(info->model_name)
+		      + sizeof(struct wlp_attr_model_nr)
+		      + strlen(info->model_nr)
+		      + sizeof(struct wlp_attr_serial)
+		      + strlen(info->serial)
+		      + sizeof(struct wlp_attr_prim_dev_type)
+		      + sizeof(struct wlp_attr_wlp_assc_err);
+	if (wlp->wss.state >= WLP_WSS_STATE_ACTIVE)
+		mem_needed += sizeof(struct wlp_attr_wss_info)
+			      + sizeof(struct wlp_wss_info)
+			      + strlen(wlp->wss.name);
+	_skb = dev_alloc_skb(mem_needed);
+	if (_skb == NULL) {
+		dev_err(dev, "WLP: Cannot allocate memory for association "
+			"message.\n");
+		result = -ENOMEM;
+		goto error;
+	}
+	_d2 = (void *) _skb->data;
+	d_printf(6, dev, "D2 starts at %p \n", _d2);
+	_d2->hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID);
+	_d2->hdr.type = WLP_FRAME_ASSOCIATION;
+	_d2->type = WLP_ASSOC_D2;
+
+	wlp_set_version(&_d2->version, WLP_VERSION);
+	wlp_set_msg_type(&_d2->msg_type, WLP_ASSOC_D2);
+	d2_itr = _d2->attr;
+	used = wlp_set_uuid_e(d2_itr, uuid_e);
+	used += wlp_set_uuid_r(d2_itr + used, &wlp->uuid);
+	if (wlp->wss.state >= WLP_WSS_STATE_ACTIVE)
+		used += wlp_set_wss_info(d2_itr + used, &wlp->wss);
+	used += wlp_set_dev_name(d2_itr + used, info->name,
+				 strlen(info->name));
+	used += wlp_set_manufacturer(d2_itr + used, info->manufacturer,
+				     strlen(info->manufacturer));
+	used += wlp_set_model_name(d2_itr + used, info->model_name,
+				   strlen(info->model_name));
+	used += wlp_set_model_nr(d2_itr + used, info->model_nr,
+				 strlen(info->model_nr));
+	used += wlp_set_serial(d2_itr + used, info->serial,
+			       strlen(info->serial));
+	used += wlp_set_prim_dev_type(d2_itr + used, &info->prim_dev_type);
+	used += wlp_set_wlp_assc_err(d2_itr + used, WLP_ASSOC_ERROR_NONE);
+	skb_put(_skb, sizeof(*_d2) + used);
+	d_printf(6, dev, "D2 message:\n");
+	d_dump(6, dev, _d2, mem_needed);
+	*skb = _skb;
+error:
+	d_fnend(6, dev, "wlp %p, result = %d\n", wlp, result);
+	return result;
+}
+
+/**
+ * Allocate memory for and populate fields of F0 association frame
+ *
+ * Currently (while focusing on unsecure enrollment) we ignore the
+ * nonce's that could be placed in the message. Only the error field is
+ * populated by the value provided by the caller.
+ */
+static
+int wlp_build_assoc_f0(struct wlp *wlp, struct sk_buff **skb,
+		       enum wlp_assc_error error)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	int result = -ENOMEM;
+	struct {
+		struct wlp_frame_assoc f0_hdr;
+		struct wlp_attr_enonce enonce;
+		struct wlp_attr_rnonce rnonce;
+		struct wlp_attr_wlp_assc_err assc_err;
+	} *f0;
+	struct sk_buff *_skb;
+	struct wlp_nonce tmp;
+
+	d_fnstart(6, dev, "wlp %p\n", wlp);
+	_skb = dev_alloc_skb(sizeof(*f0));
+	if (_skb == NULL) {
+		dev_err(dev, "WLP: Unable to allocate memory for F0 "
+			"association frame. \n");
+		goto error_alloc;
+	}
+	f0 = (void *) _skb->data;
+	d_printf(6, dev, "F0 starts at %p \n", f0);
+	f0->f0_hdr.hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID);
+	f0->f0_hdr.hdr.type = WLP_FRAME_ASSOCIATION;
+	f0->f0_hdr.type = WLP_ASSOC_F0;
+	wlp_set_version(&f0->f0_hdr.version, WLP_VERSION);
+	wlp_set_msg_type(&f0->f0_hdr.msg_type, WLP_ASSOC_F0);
+	memset(&tmp, 0, sizeof(tmp));
+	wlp_set_enonce(&f0->enonce, &tmp);
+	wlp_set_rnonce(&f0->rnonce, &tmp);
+	wlp_set_wlp_assc_err(&f0->assc_err, error);
+	skb_put(_skb, sizeof(*f0));
+	*skb = _skb;
+	result = 0;
+error_alloc:
+	d_fnend(6, dev, "wlp %p, result %d \n", wlp, result);
+	return result;
+}
+
+/**
+ * Parse F0 frame
+ *
+ * We just retrieve the values and print it as an error to the user.
+ * Calling function already knows an error occured (F0 indicates error), so
+ * we just parse the content as debug for higher layers.
+ */
+int wlp_parse_f0(struct wlp *wlp, struct sk_buff *skb)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct wlp_frame_assoc *f0 = (void *) skb->data;
+	void *ptr = skb->data;
+	size_t len = skb->len;
+	size_t used;
+	ssize_t result;
+	struct wlp_nonce enonce, rnonce;
+	enum wlp_assc_error assc_err;
+	char enonce_buf[WLP_WSS_NONCE_STRSIZE];
+	char rnonce_buf[WLP_WSS_NONCE_STRSIZE];
+
+	used = sizeof(*f0);
+	result = wlp_get_enonce(wlp, ptr + used, &enonce, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain Enrollee nonce "
+			"attribute from F0 message.\n");
+		goto error_parse;
+	}
+	used += result;
+	result = wlp_get_rnonce(wlp, ptr + used, &rnonce, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain Registrar nonce "
+			"attribute from F0 message.\n");
+		goto error_parse;
+	}
+	used += result;
+	result = wlp_get_wlp_assc_err(wlp, ptr + used, &assc_err, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain WLP Association error "
+			"attribute from F0 message.\n");
+		goto error_parse;
+	}
+	wlp_wss_nonce_print(enonce_buf, sizeof(enonce_buf), &enonce);
+	wlp_wss_nonce_print(rnonce_buf, sizeof(rnonce_buf), &rnonce);
+	dev_err(dev, "WLP: Received F0 error frame from neighbor. Enrollee "
+		"nonce: %s, Registrar nonce: %s, WLP Association error: %s.\n",
+		enonce_buf, rnonce_buf, wlp_assc_error_str(assc_err));
+	result = 0;
+error_parse:
+	return result;
+}
+
+/**
+ * Retrieve variable device information from association message
+ *
+ * The device information parsed is not required in any message. This
+ * routine will thus not fail if an attribute is not present.
+ * The attributes are expected in a certain order, even if all are not
+ * present. The "attribute type" value is used to ensure the attributes
+ * are parsed in the correct order.
+ *
+ * If an error is encountered during parsing the function will return an
+ * error code, when this happens the given device_info structure may be
+ * partially filled.
+ */
+static
+int wlp_get_variable_info(struct wlp *wlp, void *data,
+			  struct wlp_device_info *dev_info, ssize_t len)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	size_t used = 0;
+	struct wlp_attr_hdr *hdr;
+	ssize_t result = 0;
+	unsigned last = 0;
+
+	while (len - used > 0) {
+		if (len - used < sizeof(*hdr)) {
+			dev_err(dev, "WLP: Partial data in frame, cannot "
+				"parse. \n");
+			goto error_parse;
+		}
+		hdr = data + used;
+		switch (le16_to_cpu(hdr->type)) {
+		case WLP_ATTR_MANUF:
+			if (last >= WLP_ATTR_MANUF) {
+				dev_err(dev, "WLP: Incorrect order of "
+					"attribute values in D1 msg.\n");
+				goto error_parse;
+			}
+			result = wlp_get_manufacturer(wlp, data + used,
+						      dev_info->manufacturer,
+						      len - used);
+			if (result < 0) {
+				dev_err(dev, "WLP: Unable to obtain "
+					"Manufacturer attribute from D1 "
+					"message.\n");
+				goto error_parse;
+			}
+			last = WLP_ATTR_MANUF;
+			used += result;
+			break;
+		case WLP_ATTR_MODEL_NAME:
+			if (last >= WLP_ATTR_MODEL_NAME) {
+				dev_err(dev, "WLP: Incorrect order of "
+					"attribute values in D1 msg.\n");
+				goto error_parse;
+			}
+			result = wlp_get_model_name(wlp, data + used,
+						    dev_info->model_name,
+						    len - used);
+			if (result < 0) {
+				dev_err(dev, "WLP: Unable to obtain Model "
+					"name attribute from D1 message.\n");
+				goto error_parse;
+			}
+			last = WLP_ATTR_MODEL_NAME;
+			used += result;
+			break;
+		case WLP_ATTR_MODEL_NR:
+			if (last >= WLP_ATTR_MODEL_NR) {
+				dev_err(dev, "WLP: Incorrect order of "
+					"attribute values in D1 msg.\n");
+				goto error_parse;
+			}
+			result = wlp_get_model_nr(wlp, data + used,
+						  dev_info->model_nr,
+						  len - used);
+			if (result < 0) {
+				dev_err(dev, "WLP: Unable to obtain Model "
+					"number attribute from D1 message.\n");
+				goto error_parse;
+			}
+			last = WLP_ATTR_MODEL_NR;
+			used += result;
+			break;
+		case WLP_ATTR_SERIAL:
+			if (last >= WLP_ATTR_SERIAL) {
+				dev_err(dev, "WLP: Incorrect order of "
+					"attribute values in D1 msg.\n");
+				goto error_parse;
+			}
+			result = wlp_get_serial(wlp, data + used,
+						dev_info->serial, len - used);
+			if (result < 0) {
+				dev_err(dev, "WLP: Unable to obtain Serial "
+					"number attribute from D1 message.\n");
+				goto error_parse;
+			}
+			last = WLP_ATTR_SERIAL;
+			used += result;
+			break;
+		case WLP_ATTR_PRI_DEV_TYPE:
+			if (last >= WLP_ATTR_PRI_DEV_TYPE) {
+				dev_err(dev, "WLP: Incorrect order of "
+					"attribute values in D1 msg.\n");
+				goto error_parse;
+			}
+			result = wlp_get_prim_dev_type(wlp, data + used,
+						       &dev_info->prim_dev_type,
+						       len - used);
+			if (result < 0) {
+				dev_err(dev, "WLP: Unable to obtain Primary "
+					"device type attribute from D1 "
+					"message.\n");
+				goto error_parse;
+			}
+			dev_info->prim_dev_type.category =
+				le16_to_cpu(dev_info->prim_dev_type.category);
+			dev_info->prim_dev_type.subID =
+				le16_to_cpu(dev_info->prim_dev_type.subID);
+			last = WLP_ATTR_PRI_DEV_TYPE;
+			used += result;
+			break;
+		default:
+			/* This is not variable device information. */
+			goto out;
+			break;
+		}
+	}
+out:
+	return used;
+error_parse:
+	return -EINVAL;
+}
+
+/**
+ * Parse incoming D1 frame, populate attribute values
+ *
+ * Caller provides pointers to memory already allocated for attributes
+ * expected in the D1 frame. These variables will be populated.
+ */
+static
+int wlp_parse_d1_frame(struct wlp *wlp, struct sk_buff *skb,
+		       struct wlp_uuid *uuid_e,
+		       enum wlp_wss_sel_mthd *sel_mthd,
+		       struct wlp_device_info *dev_info,
+		       enum wlp_assc_error *assc_err)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct wlp_frame_assoc *d1 = (void *) skb->data;
+	void *ptr = skb->data;
+	size_t len = skb->len;
+	size_t used;
+	ssize_t result;
+
+	used = sizeof(*d1);
+	result = wlp_get_uuid_e(wlp, ptr + used, uuid_e, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain UUID-E attribute from D1 "
+			"message.\n");
+		goto error_parse;
+	}
+	used += result;
+	result = wlp_get_wss_sel_mthd(wlp, ptr + used, sel_mthd, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain WSS selection method "
+			"from D1 message.\n");
+		goto error_parse;
+	}
+	used += result;
+	result = wlp_get_dev_name(wlp, ptr + used, dev_info->name,
+				     len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain Device Name from D1 "
+			"message.\n");
+		goto error_parse;
+	}
+	used += result;
+	result = wlp_get_variable_info(wlp, ptr + used, dev_info, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain Device Information from "
+			"D1 message.\n");
+		goto error_parse;
+	}
+	used += result;
+	result = wlp_get_wlp_assc_err(wlp, ptr + used, assc_err, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain WLP Association Error "
+			"Information from D1 message.\n");
+		goto error_parse;
+	}
+	result = 0;
+error_parse:
+	return result;
+}
+/**
+ * Handle incoming D1 frame
+ *
+ * The frame has already been verified to contain an Association header with
+ * the correct version number. Parse the incoming frame, construct and send
+ * a D2 frame in response.
+ *
+ * It is not clear what to do with most fields in the incoming D1 frame. We
+ * retrieve and discard the information here for now.
+ */
+void wlp_handle_d1_frame(struct work_struct *ws)
+{
+	struct wlp_assoc_frame_ctx *frame_ctx = container_of(ws,
+						  struct wlp_assoc_frame_ctx,
+						  ws);
+	struct wlp *wlp = frame_ctx->wlp;
+	struct wlp_wss *wss = &wlp->wss;
+	struct sk_buff *skb = frame_ctx->skb;
+	struct uwb_dev_addr *src = &frame_ctx->src;
+	int result;
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct wlp_uuid uuid_e;
+	enum wlp_wss_sel_mthd sel_mthd = 0;
+	struct wlp_device_info dev_info;
+	enum wlp_assc_error assc_err;
+	char uuid[WLP_WSS_UUID_STRSIZE];
+	struct sk_buff *resp = NULL;
+
+	/* Parse D1 frame */
+	d_fnstart(6, dev, "WLP: handle D1 frame. wlp = %p, skb = %p\n",
+		  wlp, skb);
+	mutex_lock(&wss->mutex);
+	mutex_lock(&wlp->mutex); /* to access wlp->uuid */
+	memset(&dev_info, 0, sizeof(dev_info));
+	result = wlp_parse_d1_frame(wlp, skb, &uuid_e, &sel_mthd, &dev_info,
+				    &assc_err);
+	if (result < 0) {
+		dev_err(dev, "WLP: Unable to parse incoming D1 frame.\n");
+		kfree_skb(skb);
+		goto out;
+	}
+	wlp_wss_uuid_print(uuid, sizeof(uuid), &uuid_e);
+	d_printf(6, dev, "From D1 frame:\n"
+		 "UUID-E: %s\n"
+		 "Selection method: %d\n"
+		 "Device name (%d bytes): %s\n"
+		 "Model name (%d bytes): %s\n"
+		 "Manufacturer (%d bytes): %s\n"
+		 "Model number (%d bytes): %s\n"
+		 "Serial number (%d bytes): %s\n"
+		 "Primary device type: \n"
+		 " Category: %d \n"
+		 " OUI: %02x:%02x:%02x \n"
+		 " OUI Subdivision: %u \n",
+		 uuid, sel_mthd,
+		 (int)strlen(dev_info.name), dev_info.name,
+		 (int)strlen(dev_info.model_name), dev_info.model_name,
+		 (int)strlen(dev_info.manufacturer), dev_info.manufacturer,
+		 (int)strlen(dev_info.model_nr),  dev_info.model_nr,
+		 (int)strlen(dev_info.serial), dev_info.serial,
+		 dev_info.prim_dev_type.category,
+		 dev_info.prim_dev_type.OUI[0],
+		 dev_info.prim_dev_type.OUI[1],
+		 dev_info.prim_dev_type.OUI[2],
+		 dev_info.prim_dev_type.OUIsubdiv);
+
+	kfree_skb(skb);
+	if (!wlp_uuid_is_set(&wlp->uuid)) {
+		dev_err(dev, "WLP: UUID is not set. Set via sysfs to "
+			"proceed. Respong to D1 message with error F0.\n");
+		result = wlp_build_assoc_f0(wlp, &resp,
+					    WLP_ASSOC_ERROR_NOT_READY);
+		if (result < 0) {
+			dev_err(dev, "WLP: Unable to construct F0 message.\n");
+			goto out;
+		}
+	} else {
+		/* Construct D2 frame */
+		result = wlp_build_assoc_d2(wlp, wss, &resp, &uuid_e);
+		if (result < 0) {
+			dev_err(dev, "WLP: Unable to construct D2 message.\n");
+			goto out;
+		}
+	}
+	/* Send D2 frame */
+	BUG_ON(wlp->xmit_frame == NULL);
+	result = wlp->xmit_frame(wlp, resp, src);
+	if (result < 0) {
+		dev_err(dev, "WLP: Unable to transmit D2 association "
+			"message: %d\n", result);
+		if (result == -ENXIO)
+			dev_err(dev, "WLP: Is network interface up? \n");
+		/* We could try again ... */
+		dev_kfree_skb_any(resp); /* we need to free if tx fails */
+	}
+out:
+	kfree(frame_ctx);
+	mutex_unlock(&wlp->mutex);
+	mutex_unlock(&wss->mutex);
+	d_fnend(6, dev, "WLP: handle D1 frame. wlp = %p\n", wlp);
+}
+
+/**
+ * Parse incoming D2 frame, create and populate temporary cache
+ *
+ * @skb: socket buffer in which D2 frame can be found
+ * @neighbor: the neighbor that sent the D2 frame
+ *
+ * Will allocate memory for temporary storage of information learned during
+ * discovery.
+ */
+int wlp_parse_d2_frame_to_cache(struct wlp *wlp, struct sk_buff *skb,
+				struct wlp_neighbor_e *neighbor)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct wlp_frame_assoc *d2 = (void *) skb->data;
+	void *ptr = skb->data;
+	size_t len = skb->len;
+	size_t used;
+	ssize_t result;
+	struct wlp_uuid uuid_e;
+	struct wlp_device_info *nb_info;
+	enum wlp_assc_error assc_err;
+
+	used = sizeof(*d2);
+	result = wlp_get_uuid_e(wlp, ptr + used, &uuid_e, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain UUID-E attribute from D2 "
+			"message.\n");
+		goto error_parse;
+	}
+	if (memcmp(&uuid_e, &wlp->uuid, sizeof(uuid_e))) {
+		dev_err(dev, "WLP: UUID-E in incoming D2 does not match "
+			"local UUID sent in D1. \n");
+		goto error_parse;
+	}
+	used += result;
+	result = wlp_get_uuid_r(wlp, ptr + used, &neighbor->uuid, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain UUID-R attribute from D2 "
+			"message.\n");
+		goto error_parse;
+	}
+	used += result;
+	result = wlp_get_wss_info_to_cache(wlp, ptr + used, neighbor,
+					   len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain WSS information "
+			"from D2 message.\n");
+		goto error_parse;
+	}
+	used += result;
+	neighbor->info = kzalloc(sizeof(struct wlp_device_info), GFP_KERNEL);
+	if (neighbor->info == NULL) {
+		dev_err(dev, "WLP: cannot allocate memory to store device "
+			"info.\n");
+		result = -ENOMEM;
+		goto error_parse;
+	}
+	nb_info = neighbor->info;
+	result = wlp_get_dev_name(wlp, ptr + used, nb_info->name,
+				  len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain Device Name from D2 "
+			"message.\n");
+		goto error_parse;
+	}
+	used += result;
+	result = wlp_get_variable_info(wlp, ptr + used, nb_info, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain Device Information from "
+			"D2 message.\n");
+		goto error_parse;
+	}
+	used += result;
+	result = wlp_get_wlp_assc_err(wlp, ptr + used, &assc_err, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain WLP Association Error "
+			"Information from D2 message.\n");
+		goto error_parse;
+	}
+	if (assc_err != WLP_ASSOC_ERROR_NONE) {
+		dev_err(dev, "WLP: neighbor device returned association "
+			"error %d\n", assc_err);
+		result = -EINVAL;
+		goto error_parse;
+	}
+	result = 0;
+error_parse:
+	if (result < 0)
+		wlp_remove_neighbor_tmp_info(neighbor);
+	return result;
+}
+
+/**
+ * Parse incoming D2 frame, populate attribute values of WSS bein enrolled in
+ *
+ * @wss: our WSS that will be enrolled
+ * @skb: socket buffer in which D2 frame can be found
+ * @neighbor: the neighbor that sent the D2 frame
+ * @wssid: the wssid of the WSS in which we want to enroll
+ *
+ * Forms part of enrollment sequence. We are trying to enroll in WSS with
+ * @wssid by using @neighbor as registrar. A D1 message was sent to
+ * @neighbor and now we need to parse the D2 response. The neighbor's
+ * response is searched for the requested WSS and if found (and it accepts
+ * enrollment), we store the information.
+ */
+int wlp_parse_d2_frame_to_enroll(struct wlp_wss *wss, struct sk_buff *skb,
+				 struct wlp_neighbor_e *neighbor,
+				 struct wlp_uuid *wssid)
+{
+	struct wlp *wlp = container_of(wss, struct wlp, wss);
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	void *ptr = skb->data;
+	size_t len = skb->len;
+	size_t used;
+	ssize_t result;
+	struct wlp_uuid uuid_e;
+	struct wlp_uuid uuid_r;
+	struct wlp_device_info nb_info;
+	enum wlp_assc_error assc_err;
+	char uuid_bufA[WLP_WSS_UUID_STRSIZE];
+	char uuid_bufB[WLP_WSS_UUID_STRSIZE];
+
+	used = sizeof(struct wlp_frame_assoc);
+	result = wlp_get_uuid_e(wlp, ptr + used, &uuid_e, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain UUID-E attribute from D2 "
+			"message.\n");
+		goto error_parse;
+	}
+	if (memcmp(&uuid_e, &wlp->uuid, sizeof(uuid_e))) {
+		dev_err(dev, "WLP: UUID-E in incoming D2 does not match "
+			"local UUID sent in D1. \n");
+		goto error_parse;
+	}
+	used += result;
+	result = wlp_get_uuid_r(wlp, ptr + used, &uuid_r, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain UUID-R attribute from D2 "
+			"message.\n");
+		goto error_parse;
+	}
+	if (memcmp(&uuid_r, &neighbor->uuid, sizeof(uuid_r))) {
+		wlp_wss_uuid_print(uuid_bufA, sizeof(uuid_bufA),
+				   &neighbor->uuid);
+		wlp_wss_uuid_print(uuid_bufB, sizeof(uuid_bufB), &uuid_r);
+		dev_err(dev, "WLP: UUID of neighbor does not match UUID "
+			"learned during discovery. Originally discovered: %s, "
+			"now from D2 message: %s\n", uuid_bufA, uuid_bufB);
+		result = -EINVAL;
+		goto error_parse;
+	}
+	used += result;
+	wss->wssid = *wssid;
+	result = wlp_get_wss_info_to_enroll(wlp, ptr + used, wss, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain WSS information "
+			"from D2 message.\n");
+		goto error_parse;
+	}
+	if (wss->state != WLP_WSS_STATE_PART_ENROLLED) {
+		dev_err(dev, "WLP: D2 message did not contain information "
+			"for successful enrollment. \n");
+		result = -EINVAL;
+		goto error_parse;
+	}
+	used += result;
+	/* Place device information on stack to continue parsing of message */
+	result = wlp_get_dev_name(wlp, ptr + used, nb_info.name,
+				  len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain Device Name from D2 "
+			"message.\n");
+		goto error_parse;
+	}
+	used += result;
+	result = wlp_get_variable_info(wlp, ptr + used, &nb_info, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain Device Information from "
+			"D2 message.\n");
+		goto error_parse;
+	}
+	used += result;
+	result = wlp_get_wlp_assc_err(wlp, ptr + used, &assc_err, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain WLP Association Error "
+			"Information from D2 message.\n");
+		goto error_parse;
+	}
+	if (assc_err != WLP_ASSOC_ERROR_NONE) {
+		dev_err(dev, "WLP: neighbor device returned association "
+			"error %d\n", assc_err);
+		if (wss->state == WLP_WSS_STATE_PART_ENROLLED) {
+			dev_err(dev, "WLP: Enrolled in WSS (should not "
+				"happen according to spec). Undoing. \n");
+			wlp_wss_reset(wss);
+		}
+		result = -EINVAL;
+		goto error_parse;
+	}
+	result = 0;
+error_parse:
+	return result;
+}
+
+/**
+ * Parse C3/C4 frame into provided variables
+ *
+ * @wssid: will point to copy of wssid retrieved from C3/C4 frame
+ * @tag:   will point to copy of tag retrieved from C3/C4 frame
+ * @virt_addr: will point to copy of virtual address retrieved from C3/C4
+ * frame.
+ *
+ * Calling function has to allocate memory for these values.
+ *
+ * skb contains a valid C3/C4 frame, return the individual fields of this
+ * frame in the provided variables.
+ */
+int wlp_parse_c3c4_frame(struct wlp *wlp, struct sk_buff *skb,
+		       struct wlp_uuid *wssid, u8 *tag,
+		       struct uwb_mac_addr *virt_addr)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	int result;
+	void *ptr = skb->data;
+	size_t len = skb->len;
+	size_t used;
+	char buf[WLP_WSS_UUID_STRSIZE];
+	struct wlp_frame_assoc *assoc = ptr;
+
+	d_fnstart(6, dev, "wlp %p, skb %p \n", wlp, skb);
+	used = sizeof(*assoc);
+	result = wlp_get_wssid(wlp, ptr + used, wssid, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain WSSID attribute from "
+			"%s message.\n", wlp_assoc_frame_str(assoc->type));
+		goto error_parse;
+	}
+	used += result;
+	result = wlp_get_wss_tag(wlp, ptr + used, tag, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain WSS tag attribute from "
+			"%s message.\n", wlp_assoc_frame_str(assoc->type));
+		goto error_parse;
+	}
+	used += result;
+	result = wlp_get_wss_virt(wlp, ptr + used, virt_addr, len - used);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain WSS virtual address "
+			"attribute from %s message.\n",
+			wlp_assoc_frame_str(assoc->type));
+		goto error_parse;
+	}
+	wlp_wss_uuid_print(buf, sizeof(buf), wssid);
+	d_printf(6, dev, "WLP: parsed: WSSID %s, tag 0x%02x, virt "
+		 "%02x:%02x:%02x:%02x:%02x:%02x \n", buf, *tag,
+		 virt_addr->data[0], virt_addr->data[1], virt_addr->data[2],
+		 virt_addr->data[3], virt_addr->data[4], virt_addr->data[5]);
+
+error_parse:
+	d_fnend(6, dev, "wlp %p, skb %p, result = %d \n", wlp, skb, result);
+	return result;
+}
+
+/**
+ * Allocate memory for and populate fields of C1 or C2 association frame
+ *
+ * The C1 and C2 association frames appear identical - except for the type.
+ */
+static
+int wlp_build_assoc_c1c2(struct wlp *wlp, struct wlp_wss *wss,
+			 struct sk_buff **skb, enum wlp_assoc_type type)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	int result  = -ENOMEM;
+	struct {
+		struct wlp_frame_assoc c_hdr;
+		struct wlp_attr_wssid wssid;
+	} *c;
+	struct sk_buff *_skb;
+
+	d_fnstart(6, dev, "wlp %p, wss %p \n", wlp, wss);
+	_skb = dev_alloc_skb(sizeof(*c));
+	if (_skb == NULL) {
+		dev_err(dev, "WLP: Unable to allocate memory for C1/C2 "
+			"association frame. \n");
+		goto error_alloc;
+	}
+	c = (void *) _skb->data;
+	d_printf(6, dev, "C1/C2 starts at %p \n", c);
+	c->c_hdr.hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID);
+	c->c_hdr.hdr.type = WLP_FRAME_ASSOCIATION;
+	c->c_hdr.type = type;
+	wlp_set_version(&c->c_hdr.version, WLP_VERSION);
+	wlp_set_msg_type(&c->c_hdr.msg_type, type);
+	wlp_set_wssid(&c->wssid, &wss->wssid);
+	skb_put(_skb, sizeof(*c));
+	d_printf(6, dev, "C1/C2 message:\n");
+	d_dump(6, dev, c, sizeof(*c));
+	*skb = _skb;
+	result = 0;
+error_alloc:
+	d_fnend(6, dev, "wlp %p, wss %p, result %d \n", wlp, wss, result);
+	return result;
+}
+
+
+static
+int wlp_build_assoc_c1(struct wlp *wlp, struct wlp_wss *wss,
+		       struct sk_buff **skb)
+{
+	return wlp_build_assoc_c1c2(wlp, wss, skb, WLP_ASSOC_C1);
+}
+
+static
+int wlp_build_assoc_c2(struct wlp *wlp, struct wlp_wss *wss,
+		       struct sk_buff **skb)
+{
+	return wlp_build_assoc_c1c2(wlp, wss, skb, WLP_ASSOC_C2);
+}
+
+
+/**
+ * Allocate memory for and populate fields of C3 or C4 association frame
+ *
+ * The C3 and C4 association frames appear identical - except for the type.
+ */
+static
+int wlp_build_assoc_c3c4(struct wlp *wlp, struct wlp_wss *wss,
+			 struct sk_buff **skb, enum wlp_assoc_type type)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	int result  = -ENOMEM;
+	struct {
+		struct wlp_frame_assoc c_hdr;
+		struct wlp_attr_wssid wssid;
+		struct wlp_attr_wss_tag wss_tag;
+		struct wlp_attr_wss_virt wss_virt;
+	} *c;
+	struct sk_buff *_skb;
+
+	d_fnstart(6, dev, "wlp %p, wss %p \n", wlp, wss);
+	_skb = dev_alloc_skb(sizeof(*c));
+	if (_skb == NULL) {
+		dev_err(dev, "WLP: Unable to allocate memory for C3/C4 "
+			"association frame. \n");
+		goto error_alloc;
+	}
+	c = (void *) _skb->data;
+	d_printf(6, dev, "C3/C4 starts at %p \n", c);
+	c->c_hdr.hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID);
+	c->c_hdr.hdr.type = WLP_FRAME_ASSOCIATION;
+	c->c_hdr.type = type;
+	wlp_set_version(&c->c_hdr.version, WLP_VERSION);
+	wlp_set_msg_type(&c->c_hdr.msg_type, type);
+	wlp_set_wssid(&c->wssid, &wss->wssid);
+	wlp_set_wss_tag(&c->wss_tag, wss->tag);
+	wlp_set_wss_virt(&c->wss_virt, &wss->virtual_addr);
+	skb_put(_skb, sizeof(*c));
+	d_printf(6, dev, "C3/C4 message:\n");
+	d_dump(6, dev, c, sizeof(*c));
+	*skb = _skb;
+	result = 0;
+error_alloc:
+	d_fnend(6, dev, "wlp %p, wss %p, result %d \n", wlp, wss, result);
+	return result;
+}
+
+static
+int wlp_build_assoc_c3(struct wlp *wlp, struct wlp_wss *wss,
+		       struct sk_buff **skb)
+{
+	return wlp_build_assoc_c3c4(wlp, wss, skb, WLP_ASSOC_C3);
+}
+
+static
+int wlp_build_assoc_c4(struct wlp *wlp, struct wlp_wss *wss,
+		       struct sk_buff **skb)
+{
+	return wlp_build_assoc_c3c4(wlp, wss, skb, WLP_ASSOC_C4);
+}
+
+
+#define wlp_send_assoc(type, id)					\
+static int wlp_send_assoc_##type(struct wlp *wlp, struct wlp_wss *wss,	\
+				 struct uwb_dev_addr *dev_addr)		\
+{									\
+	struct device *dev = &wlp->rc->uwb_dev.dev;			\
+	int result;							\
+	struct sk_buff *skb = NULL;					\
+	d_fnstart(6, dev, "wlp %p, wss %p, neighbor: %02x:%02x\n",	\
+		  wlp, wss, dev_addr->data[1], dev_addr->data[0]);	\
+	d_printf(6, dev, "WLP: Constructing %s frame. \n",		\
+		 wlp_assoc_frame_str(id));				\
+	/* Build the frame */						\
+	result = wlp_build_assoc_##type(wlp, wss, &skb);		\
+	if (result < 0) {						\
+		dev_err(dev, "WLP: Unable to construct %s association "	\
+			"frame: %d\n", wlp_assoc_frame_str(id), result);\
+		goto error_build_assoc;					\
+	}								\
+	/* Send the frame */						\
+	d_printf(6, dev, "Transmitting %s frame to %02x:%02x \n",	\
+		 wlp_assoc_frame_str(id),				\
+		 dev_addr->data[1], dev_addr->data[0]);			\
+	BUG_ON(wlp->xmit_frame == NULL);				\
+	result = wlp->xmit_frame(wlp, skb, dev_addr);			\
+	if (result < 0) {						\
+		dev_err(dev, "WLP: Unable to transmit %s association "	\
+			"message: %d\n", wlp_assoc_frame_str(id),	\
+			result);					\
+		if (result == -ENXIO)					\
+			dev_err(dev, "WLP: Is network interface "	\
+				"up? \n");				\
+		goto error_xmit;					\
+	}								\
+	return 0;							\
+error_xmit:								\
+	/* We could try again ... */					\
+	dev_kfree_skb_any(skb);/*we need to free if tx fails*/		\
+error_build_assoc:							\
+	d_fnend(6, dev, "wlp %p, wss %p, neighbor: %02x:%02x\n",	\
+		wlp, wss, dev_addr->data[1], dev_addr->data[0]);	\
+	return result;							\
+}
+
+wlp_send_assoc(d1, WLP_ASSOC_D1)
+wlp_send_assoc(c1, WLP_ASSOC_C1)
+wlp_send_assoc(c3, WLP_ASSOC_C3)
+
+int wlp_send_assoc_frame(struct wlp *wlp, struct wlp_wss *wss,
+			 struct uwb_dev_addr *dev_addr,
+			 enum wlp_assoc_type type)
+{
+	int result = 0;
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	switch (type) {
+	case WLP_ASSOC_D1:
+		result = wlp_send_assoc_d1(wlp, wss, dev_addr);
+		break;
+	case WLP_ASSOC_C1:
+		result = wlp_send_assoc_c1(wlp, wss, dev_addr);
+		break;
+	case WLP_ASSOC_C3:
+		result = wlp_send_assoc_c3(wlp, wss, dev_addr);
+		break;
+	default:
+		dev_err(dev, "WLP: Received request to send unknown "
+			"association message.\n");
+		result = -EINVAL;
+		break;
+	}
+	return result;
+}
+
+/**
+ * Handle incoming C1 frame
+ *
+ * The frame has already been verified to contain an Association header with
+ * the correct version number. Parse the incoming frame, construct and send
+ * a C2 frame in response.
+ */
+void wlp_handle_c1_frame(struct work_struct *ws)
+{
+	struct wlp_assoc_frame_ctx *frame_ctx = container_of(ws,
+						  struct wlp_assoc_frame_ctx,
+						  ws);
+	struct wlp *wlp = frame_ctx->wlp;
+	struct wlp_wss *wss = &wlp->wss;
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct wlp_frame_assoc *c1 = (void *) frame_ctx->skb->data;
+	unsigned int len = frame_ctx->skb->len;
+	struct uwb_dev_addr *src = &frame_ctx->src;
+	int result;
+	struct wlp_uuid wssid;
+	char buf[WLP_WSS_UUID_STRSIZE];
+	struct sk_buff *resp = NULL;
+
+	/* Parse C1 frame */
+	d_fnstart(6, dev, "WLP: handle C1 frame. wlp = %p, c1 = %p\n",
+		  wlp, c1);
+	mutex_lock(&wss->mutex);
+	result = wlp_get_wssid(wlp, (void *)c1 + sizeof(*c1), &wssid,
+			       len - sizeof(*c1));
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain WSSID from C1 frame.\n");
+		goto out;
+	}
+	wlp_wss_uuid_print(buf, sizeof(buf), &wssid);
+	d_printf(6, dev, "Received C1 frame with WSSID %s \n", buf);
+	if (!memcmp(&wssid, &wss->wssid, sizeof(wssid))
+	    && wss->state == WLP_WSS_STATE_ACTIVE) {
+		d_printf(6, dev, "WSSID from C1 frame is known locally "
+			 "and is active\n");
+		/* Construct C2 frame */
+		result = wlp_build_assoc_c2(wlp, wss, &resp);
+		if (result < 0) {
+			dev_err(dev, "WLP: Unable to construct C2 message.\n");
+			goto out;
+		}
+	} else {
+		d_printf(6, dev, "WSSID from C1 frame is not known locally "
+			 "or is not active\n");
+		/* Construct F0 frame */
+		result = wlp_build_assoc_f0(wlp, &resp, WLP_ASSOC_ERROR_INV);
+		if (result < 0) {
+			dev_err(dev, "WLP: Unable to construct F0 message.\n");
+			goto out;
+		}
+	}
+	/* Send C2 frame */
+	d_printf(6, dev, "Transmitting response (C2/F0) frame to %02x:%02x \n",
+		 src->data[1], src->data[0]);
+	BUG_ON(wlp->xmit_frame == NULL);
+	result = wlp->xmit_frame(wlp, resp, src);
+	if (result < 0) {
+		dev_err(dev, "WLP: Unable to transmit response association "
+			"message: %d\n", result);
+		if (result == -ENXIO)
+			dev_err(dev, "WLP: Is network interface up? \n");
+		/* We could try again ... */
+		dev_kfree_skb_any(resp); /* we need to free if tx fails */
+	}
+out:
+	kfree_skb(frame_ctx->skb);
+	kfree(frame_ctx);
+	mutex_unlock(&wss->mutex);
+	d_fnend(6, dev, "WLP: handle C1 frame. wlp = %p\n", wlp);
+}
+
+/**
+ * Handle incoming C3 frame
+ *
+ * The frame has already been verified to contain an Association header with
+ * the correct version number. Parse the incoming frame, construct and send
+ * a C4 frame in response. If the C3 frame identifies a WSS that is locally
+ * active then we connect to this neighbor (add it to our EDA cache).
+ */
+void wlp_handle_c3_frame(struct work_struct *ws)
+{
+	struct wlp_assoc_frame_ctx *frame_ctx = container_of(ws,
+						  struct wlp_assoc_frame_ctx,
+						  ws);
+	struct wlp *wlp = frame_ctx->wlp;
+	struct wlp_wss *wss = &wlp->wss;
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct sk_buff *skb = frame_ctx->skb;
+	struct uwb_dev_addr *src = &frame_ctx->src;
+	int result;
+	char buf[WLP_WSS_UUID_STRSIZE];
+	struct sk_buff *resp = NULL;
+	struct wlp_uuid wssid;
+	u8 tag;
+	struct uwb_mac_addr virt_addr;
+
+	/* Parse C3 frame */
+	d_fnstart(6, dev, "WLP: handle C3 frame. wlp = %p, skb = %p\n",
+		  wlp, skb);
+	mutex_lock(&wss->mutex);
+	result = wlp_parse_c3c4_frame(wlp, skb, &wssid, &tag, &virt_addr);
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain values from C3 frame.\n");
+		goto out;
+	}
+	wlp_wss_uuid_print(buf, sizeof(buf), &wssid);
+	d_printf(6, dev, "Received C3 frame with WSSID %s \n", buf);
+	if (!memcmp(&wssid, &wss->wssid, sizeof(wssid))
+	    && wss->state >= WLP_WSS_STATE_ACTIVE) {
+		d_printf(6, dev, "WSSID from C3 frame is known locally "
+			 "and is active\n");
+		result = wlp_eda_update_node(&wlp->eda, src, wss,
+					     (void *) virt_addr.data, tag,
+					     WLP_WSS_CONNECTED);
+		if (result < 0) {
+			dev_err(dev, "WLP: Unable to update EDA cache "
+				"with new connected neighbor information.\n");
+			result = wlp_build_assoc_f0(wlp, &resp,
+						    WLP_ASSOC_ERROR_INT);
+			if (result < 0) {
+				dev_err(dev, "WLP: Unable to construct F0 "
+					"message.\n");
+				goto out;
+			}
+		} else {
+			wss->state = WLP_WSS_STATE_CONNECTED;
+			/* Construct C4 frame */
+			result = wlp_build_assoc_c4(wlp, wss, &resp);
+			if (result < 0) {
+				dev_err(dev, "WLP: Unable to construct C4 "
+					"message.\n");
+				goto out;
+			}
+		}
+	} else {
+		d_printf(6, dev, "WSSID from C3 frame is not known locally "
+			 "or is not active\n");
+		/* Construct F0 frame */
+		result = wlp_build_assoc_f0(wlp, &resp, WLP_ASSOC_ERROR_INV);
+		if (result < 0) {
+			dev_err(dev, "WLP: Unable to construct F0 message.\n");
+			goto out;
+		}
+	}
+	/* Send C4 frame */
+	d_printf(6, dev, "Transmitting response (C4/F0) frame to %02x:%02x \n",
+		 src->data[1], src->data[0]);
+	BUG_ON(wlp->xmit_frame == NULL);
+	result = wlp->xmit_frame(wlp, resp, src);
+	if (result < 0) {
+		dev_err(dev, "WLP: Unable to transmit response association "
+			"message: %d\n", result);
+		if (result == -ENXIO)
+			dev_err(dev, "WLP: Is network interface up? \n");
+		/* We could try again ... */
+		dev_kfree_skb_any(resp); /* we need to free if tx fails */
+	}
+out:
+	kfree_skb(frame_ctx->skb);
+	kfree(frame_ctx);
+	mutex_unlock(&wss->mutex);
+	d_fnend(6, dev, "WLP: handle C3 frame. wlp = %p, skb = %p\n",
+		wlp, skb);
+}
+
+
diff --git a/drivers/uwb/wlp/sysfs.c b/drivers/uwb/wlp/sysfs.c
new file mode 100644
index 0000000..1bb9b1f
--- /dev/null
+++ b/drivers/uwb/wlp/sysfs.c
@@ -0,0 +1,709 @@
+/*
+ * WiMedia Logical Link Control Protocol (WLP)
+ * sysfs functions
+ *
+ * Copyright (C) 2007 Intel Corporation
+ * Reinette Chatre <reinette.chatre@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: Docs
+ *
+ */
+
+#include <linux/wlp.h>
+#include "wlp-internal.h"
+
+static
+size_t wlp_wss_wssid_e_print(char *buf, size_t bufsize,
+			     struct wlp_wssid_e *wssid_e)
+{
+	size_t used = 0;
+	used += scnprintf(buf, bufsize, " WSS: ");
+	used += wlp_wss_uuid_print(buf + used, bufsize - used,
+				   &wssid_e->wssid);
+
+	if (wssid_e->info != NULL) {
+		used += scnprintf(buf + used, bufsize - used, " ");
+		used += uwb_mac_addr_print(buf + used, bufsize - used,
+					   &wssid_e->info->bcast);
+		used += scnprintf(buf + used, bufsize - used, " %u %u %s\n",
+				  wssid_e->info->accept_enroll,
+				  wssid_e->info->sec_status,
+				  wssid_e->info->name);
+	}
+	return used;
+}
+
+/**
+ * Print out information learned from neighbor discovery
+ *
+ * Some fields being printed may not be included in the device discovery
+ * information (it is not mandatory). We are thus careful how the
+ * information is printed to ensure it is clear to the user what field is
+ * being referenced.
+ * The information being printed is for one time use - temporary storage is
+ * cleaned after it is printed.
+ *
+ * Ideally sysfs output should be on one line. The information printed here
+ * contain a few strings so it will be hard to parse if they are all
+ * printed on the same line - without agreeing on a standard field
+ * separator.
+ */
+static
+ssize_t wlp_wss_neighborhood_print_remove(struct wlp *wlp, char *buf,
+				   size_t bufsize)
+{
+	size_t used = 0;
+	struct wlp_neighbor_e *neighb;
+	struct wlp_wssid_e *wssid_e;
+
+	mutex_lock(&wlp->nbmutex);
+	used = scnprintf(buf, bufsize, "#Neighbor information\n"
+			 "#uuid dev_addr\n"
+			 "# Device Name:\n# Model Name:\n# Manufacturer:\n"
+			 "# Model Nr:\n# Serial:\n"
+			 "# Pri Dev type: CategoryID OUI OUISubdiv "
+			 "SubcategoryID\n"
+			 "# WSS: WSSID WSS_name accept_enroll sec_status "
+			 "bcast\n"
+			 "# WSS: WSSID WSS_name accept_enroll sec_status "
+			 "bcast\n\n");
+	list_for_each_entry(neighb, &wlp->neighbors, node) {
+		if (bufsize - used <= 0)
+			goto out;
+		used += wlp_wss_uuid_print(buf + used, bufsize - used,
+					   &neighb->uuid);
+		buf[used++] = ' ';
+		used += uwb_dev_addr_print(buf + used, bufsize - used,
+					   &neighb->uwb_dev->dev_addr);
+		if (neighb->info != NULL)
+			used += scnprintf(buf + used, bufsize - used,
+					  "\n Device Name: %s\n"
+					  " Model Name: %s\n"
+					  " Manufacturer:%s \n"
+					  " Model Nr: %s\n"
+					  " Serial: %s\n"
+					  " Pri Dev type: "
+					  "%u %02x:%02x:%02x %u %u\n",
+					  neighb->info->name,
+					  neighb->info->model_name,
+					  neighb->info->manufacturer,
+					  neighb->info->model_nr,
+					  neighb->info->serial,
+					  neighb->info->prim_dev_type.category,
+					  neighb->info->prim_dev_type.OUI[0],
+					  neighb->info->prim_dev_type.OUI[1],
+					  neighb->info->prim_dev_type.OUI[2],
+					  neighb->info->prim_dev_type.OUIsubdiv,
+					  neighb->info->prim_dev_type.subID);
+		list_for_each_entry(wssid_e, &neighb->wssid, node) {
+			used += wlp_wss_wssid_e_print(buf + used,
+						      bufsize - used,
+						      wssid_e);
+		}
+		buf[used++] = '\n';
+		wlp_remove_neighbor_tmp_info(neighb);
+	}
+
+
+out:
+	mutex_unlock(&wlp->nbmutex);
+	return used;
+}
+
+
+/**
+ * Show properties of all WSS in neighborhood.
+ *
+ * Will trigger a complete discovery of WSS activated by this device and
+ * its neighbors.
+ */
+ssize_t wlp_neighborhood_show(struct wlp *wlp, char *buf)
+{
+	wlp_discover(wlp);
+	return wlp_wss_neighborhood_print_remove(wlp, buf, PAGE_SIZE);
+}
+EXPORT_SYMBOL_GPL(wlp_neighborhood_show);
+
+static
+ssize_t __wlp_wss_properties_show(struct wlp_wss *wss, char *buf,
+				  size_t bufsize)
+{
+	ssize_t result;
+
+	result = wlp_wss_uuid_print(buf, bufsize, &wss->wssid);
+	result += scnprintf(buf + result, bufsize - result, " ");
+	result += uwb_mac_addr_print(buf + result, bufsize - result,
+				     &wss->bcast);
+	result += scnprintf(buf + result, bufsize - result,
+			    " 0x%02x %u ", wss->hash, wss->secure_status);
+	result += wlp_wss_key_print(buf + result, bufsize - result,
+				    wss->master_key);
+	result += scnprintf(buf + result, bufsize - result, " 0x%02x ",
+			    wss->tag);
+	result += uwb_mac_addr_print(buf + result, bufsize - result,
+				     &wss->virtual_addr);
+	result += scnprintf(buf + result, bufsize - result, " %s", wss->name);
+	result += scnprintf(buf + result, bufsize - result,
+			    "\n\n#WSSID\n#WSS broadcast address\n"
+			    "#WSS hash\n#WSS secure status\n"
+			    "#WSS master key\n#WSS local tag\n"
+			    "#WSS local virtual EUI-48\n#WSS name\n");
+	return result;
+}
+
+/**
+ * Show which WSS is activated.
+ */
+ssize_t wlp_wss_activate_show(struct wlp_wss *wss, char *buf)
+{
+	int result = 0;
+
+	if (mutex_lock_interruptible(&wss->mutex))
+		goto out;
+	if (wss->state >= WLP_WSS_STATE_ACTIVE)
+		result = __wlp_wss_properties_show(wss, buf, PAGE_SIZE);
+	else
+		result = scnprintf(buf, PAGE_SIZE, "No local WSS active.\n");
+	result += scnprintf(buf + result, PAGE_SIZE - result,
+			"\n\n"
+			"# echo WSSID SECURE_STATUS ACCEPT_ENROLLMENT "
+			"NAME #create new WSS\n"
+			"# echo WSSID [DEV ADDR] #enroll in and activate "
+			"existing WSS, can request registrar\n"
+			"#\n"
+			"# WSSID is a 16 byte hex array. Eg. 12 A3 3B ... \n"
+			"# SECURE_STATUS 0 - unsecure, 1 - secure (default)\n"
+			"# ACCEPT_ENROLLMENT 0 - no, 1 - yes (default)\n"
+			"# NAME is the text string identifying the WSS\n"
+			"# DEV ADDR is the device address of neighbor "
+			"that should be registrar. Eg. 32:AB\n");
+
+	mutex_unlock(&wss->mutex);
+out:
+	return result;
+
+}
+EXPORT_SYMBOL_GPL(wlp_wss_activate_show);
+
+/**
+ * Create/activate a new WSS or enroll/activate in neighboring WSS
+ *
+ * The user can provide the WSSID of a WSS in which it wants to enroll.
+ * Only the WSSID is necessary if the WSS have been discovered before. If
+ * the WSS has not been discovered before, or the user wants to use a
+ * particular neighbor as its registrar, then the user can also provide a
+ * device address or the neighbor that will be used as registrar.
+ *
+ * A new WSS is created when the user provides a WSSID, secure status, and
+ * WSS name.
+ */
+ssize_t wlp_wss_activate_store(struct wlp_wss *wss,
+			       const char *buf, size_t size)
+{
+	ssize_t result = -EINVAL;
+	struct wlp_uuid wssid;
+	struct uwb_dev_addr dev;
+	struct uwb_dev_addr bcast = {.data = {0xff, 0xff} };
+	char name[65];
+	unsigned sec_status, accept;
+	memset(name, 0, sizeof(name));
+	result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx:%02hhx",
+			&wssid.data[0] , &wssid.data[1],
+			&wssid.data[2] , &wssid.data[3],
+			&wssid.data[4] , &wssid.data[5],
+			&wssid.data[6] , &wssid.data[7],
+			&wssid.data[8] , &wssid.data[9],
+			&wssid.data[10], &wssid.data[11],
+			&wssid.data[12], &wssid.data[13],
+			&wssid.data[14], &wssid.data[15],
+			&dev.data[1], &dev.data[0]);
+	if (result == 16 || result == 17) {
+		result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx "
+				"%02hhx %02hhx %02hhx %02hhx "
+				"%02hhx %02hhx %02hhx %02hhx "
+				"%02hhx %02hhx %02hhx %02hhx "
+				"%u %u %64c",
+				&wssid.data[0] , &wssid.data[1],
+				&wssid.data[2] , &wssid.data[3],
+				&wssid.data[4] , &wssid.data[5],
+				&wssid.data[6] , &wssid.data[7],
+				&wssid.data[8] , &wssid.data[9],
+				&wssid.data[10], &wssid.data[11],
+				&wssid.data[12], &wssid.data[13],
+				&wssid.data[14], &wssid.data[15],
+				&sec_status, &accept, name);
+		if (result == 16)
+			result = wlp_wss_enroll_activate(wss, &wssid, &bcast);
+		else if (result == 19) {
+			sec_status = sec_status == 0 ? 0 : 1;
+			accept = accept == 0 ? 0 : 1;
+			/* We read name using %c, so the newline needs to be
+			 * removed */
+			if (strlen(name) != sizeof(name) - 1)
+				name[strlen(name) - 1] = '\0';
+			result = wlp_wss_create_activate(wss, &wssid, name,
+							 sec_status, accept);
+		} else
+			result = -EINVAL;
+	} else if (result == 18)
+		result = wlp_wss_enroll_activate(wss, &wssid, &dev);
+	else
+		result = -EINVAL;
+	return result < 0 ? result : size;
+}
+EXPORT_SYMBOL_GPL(wlp_wss_activate_store);
+
+/**
+ * Show the UUID of this host
+ */
+ssize_t wlp_uuid_show(struct wlp *wlp, char *buf)
+{
+	ssize_t result = 0;
+
+	mutex_lock(&wlp->mutex);
+	result = wlp_wss_uuid_print(buf, PAGE_SIZE, &wlp->uuid);
+	buf[result++] = '\n';
+	mutex_unlock(&wlp->mutex);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wlp_uuid_show);
+
+/**
+ * Store a new UUID for this host
+ *
+ * According to the spec this should be encoded as an octet string in the
+ * order the octets are shown in string representation in RFC 4122 (WLP
+ * 0.99 [Table 6])
+ *
+ * We do not check value provided by user.
+ */
+ssize_t wlp_uuid_store(struct wlp *wlp, const char *buf, size_t size)
+{
+	ssize_t result;
+	struct wlp_uuid uuid;
+
+	mutex_lock(&wlp->mutex);
+	result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx ",
+			&uuid.data[0] , &uuid.data[1],
+			&uuid.data[2] , &uuid.data[3],
+			&uuid.data[4] , &uuid.data[5],
+			&uuid.data[6] , &uuid.data[7],
+			&uuid.data[8] , &uuid.data[9],
+			&uuid.data[10], &uuid.data[11],
+			&uuid.data[12], &uuid.data[13],
+			&uuid.data[14], &uuid.data[15]);
+	if (result != 16) {
+		result = -EINVAL;
+		goto error;
+	}
+	wlp->uuid = uuid;
+error:
+	mutex_unlock(&wlp->mutex);
+	return result < 0 ? result : size;
+}
+EXPORT_SYMBOL_GPL(wlp_uuid_store);
+
+/**
+ * Show contents of members of device information structure
+ */
+#define wlp_dev_info_show(type)						\
+ssize_t wlp_dev_##type##_show(struct wlp *wlp, char *buf)		\
+{									\
+	ssize_t result = 0;						\
+	mutex_lock(&wlp->mutex);					\
+	if (wlp->dev_info == NULL) {					\
+		result = __wlp_setup_device_info(wlp);			\
+		if (result < 0)						\
+			goto out;					\
+	}								\
+	result = scnprintf(buf, PAGE_SIZE, "%s\n", wlp->dev_info->type);\
+out:									\
+	mutex_unlock(&wlp->mutex);					\
+	return result;							\
+}									\
+EXPORT_SYMBOL_GPL(wlp_dev_##type##_show);
+
+wlp_dev_info_show(name)
+wlp_dev_info_show(model_name)
+wlp_dev_info_show(model_nr)
+wlp_dev_info_show(manufacturer)
+wlp_dev_info_show(serial)
+
+/**
+ * Store contents of members of device information structure
+ */
+#define wlp_dev_info_store(type, len)					\
+ssize_t wlp_dev_##type##_store(struct wlp *wlp, const char *buf, size_t size)\
+{									\
+	ssize_t result;							\
+	char format[10];						\
+	mutex_lock(&wlp->mutex);					\
+	if (wlp->dev_info == NULL) {					\
+		result = __wlp_alloc_device_info(wlp);			\
+		if (result < 0)						\
+			goto out;					\
+	}								\
+	memset(wlp->dev_info->type, 0, sizeof(wlp->dev_info->type));	\
+	sprintf(format, "%%%uc", len);					\
+	result = sscanf(buf, format, wlp->dev_info->type);		\
+out:									\
+	mutex_unlock(&wlp->mutex);					\
+	return result < 0 ? result : size;				\
+}									\
+EXPORT_SYMBOL_GPL(wlp_dev_##type##_store);
+
+wlp_dev_info_store(name, 32)
+wlp_dev_info_store(manufacturer, 64)
+wlp_dev_info_store(model_name, 32)
+wlp_dev_info_store(model_nr, 32)
+wlp_dev_info_store(serial, 32)
+
+static
+const char *__wlp_dev_category[] = {
+	[WLP_DEV_CAT_COMPUTER] = "Computer",
+	[WLP_DEV_CAT_INPUT] = "Input device",
+	[WLP_DEV_CAT_PRINT_SCAN_FAX_COPIER] = "Printer, scanner, FAX, or "
+					      "Copier",
+	[WLP_DEV_CAT_CAMERA] = "Camera",
+	[WLP_DEV_CAT_STORAGE] = "Storage Network",
+	[WLP_DEV_CAT_INFRASTRUCTURE] = "Infrastructure",
+	[WLP_DEV_CAT_DISPLAY] = "Display",
+	[WLP_DEV_CAT_MULTIM] = "Multimedia device",
+	[WLP_DEV_CAT_GAMING] = "Gaming device",
+	[WLP_DEV_CAT_TELEPHONE] = "Telephone",
+	[WLP_DEV_CAT_OTHER] = "Other",
+};
+
+static
+const char *wlp_dev_category_str(unsigned cat)
+{
+	if ((cat >= WLP_DEV_CAT_COMPUTER && cat <= WLP_DEV_CAT_TELEPHONE)
+	    || cat == WLP_DEV_CAT_OTHER)
+		return __wlp_dev_category[cat];
+	return "unknown category";
+}
+
+ssize_t wlp_dev_prim_category_show(struct wlp *wlp, char *buf)
+{
+	ssize_t result = 0;
+	mutex_lock(&wlp->mutex);
+	if (wlp->dev_info == NULL) {
+		result = __wlp_setup_device_info(wlp);
+		if (result < 0)
+			goto out;
+	}
+	result = scnprintf(buf, PAGE_SIZE, "%s\n",
+		  wlp_dev_category_str(wlp->dev_info->prim_dev_type.category));
+out:
+	mutex_unlock(&wlp->mutex);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wlp_dev_prim_category_show);
+
+ssize_t wlp_dev_prim_category_store(struct wlp *wlp, const char *buf,
+				    size_t size)
+{
+	ssize_t result;
+	u16 cat;
+	mutex_lock(&wlp->mutex);
+	if (wlp->dev_info == NULL) {
+		result = __wlp_alloc_device_info(wlp);
+		if (result < 0)
+			goto out;
+	}
+	result = sscanf(buf, "%hu", &cat);
+	if ((cat >= WLP_DEV_CAT_COMPUTER && cat <= WLP_DEV_CAT_TELEPHONE)
+	    || cat == WLP_DEV_CAT_OTHER)
+		wlp->dev_info->prim_dev_type.category = cat;
+	else
+		result = -EINVAL;
+out:
+	mutex_unlock(&wlp->mutex);
+	return result < 0 ? result : size;
+}
+EXPORT_SYMBOL_GPL(wlp_dev_prim_category_store);
+
+ssize_t wlp_dev_prim_OUI_show(struct wlp *wlp, char *buf)
+{
+	ssize_t result = 0;
+	mutex_lock(&wlp->mutex);
+	if (wlp->dev_info == NULL) {
+		result = __wlp_setup_device_info(wlp);
+		if (result < 0)
+			goto out;
+	}
+	result = scnprintf(buf, PAGE_SIZE, "%02x:%02x:%02x\n",
+			   wlp->dev_info->prim_dev_type.OUI[0],
+			   wlp->dev_info->prim_dev_type.OUI[1],
+			   wlp->dev_info->prim_dev_type.OUI[2]);
+out:
+	mutex_unlock(&wlp->mutex);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_show);
+
+ssize_t wlp_dev_prim_OUI_store(struct wlp *wlp, const char *buf, size_t size)
+{
+	ssize_t result;
+	u8 OUI[3];
+	mutex_lock(&wlp->mutex);
+	if (wlp->dev_info == NULL) {
+		result = __wlp_alloc_device_info(wlp);
+		if (result < 0)
+			goto out;
+	}
+	result = sscanf(buf, "%hhx:%hhx:%hhx",
+			&OUI[0], &OUI[1], &OUI[2]);
+	if (result != 3) {
+		result = -EINVAL;
+		goto out;
+	} else
+		memcpy(wlp->dev_info->prim_dev_type.OUI, OUI, sizeof(OUI));
+out:
+	mutex_unlock(&wlp->mutex);
+	return result < 0 ? result : size;
+}
+EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_store);
+
+
+ssize_t wlp_dev_prim_OUI_sub_show(struct wlp *wlp, char *buf)
+{
+	ssize_t result = 0;
+	mutex_lock(&wlp->mutex);
+	if (wlp->dev_info == NULL) {
+		result = __wlp_setup_device_info(wlp);
+		if (result < 0)
+			goto out;
+	}
+	result = scnprintf(buf, PAGE_SIZE, "%u\n",
+			   wlp->dev_info->prim_dev_type.OUIsubdiv);
+out:
+	mutex_unlock(&wlp->mutex);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_sub_show);
+
+ssize_t wlp_dev_prim_OUI_sub_store(struct wlp *wlp, const char *buf,
+				   size_t size)
+{
+	ssize_t result;
+	unsigned sub;
+	u8 max_sub = ~0;
+	mutex_lock(&wlp->mutex);
+	if (wlp->dev_info == NULL) {
+		result = __wlp_alloc_device_info(wlp);
+		if (result < 0)
+			goto out;
+	}
+	result = sscanf(buf, "%u", &sub);
+	if (sub <= max_sub)
+		wlp->dev_info->prim_dev_type.OUIsubdiv = sub;
+	else
+		result = -EINVAL;
+out:
+	mutex_unlock(&wlp->mutex);
+	return result < 0 ? result : size;
+}
+EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_sub_store);
+
+ssize_t wlp_dev_prim_subcat_show(struct wlp *wlp, char *buf)
+{
+	ssize_t result = 0;
+	mutex_lock(&wlp->mutex);
+	if (wlp->dev_info == NULL) {
+		result = __wlp_setup_device_info(wlp);
+		if (result < 0)
+			goto out;
+	}
+	result = scnprintf(buf, PAGE_SIZE, "%u\n",
+			   wlp->dev_info->prim_dev_type.subID);
+out:
+	mutex_unlock(&wlp->mutex);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wlp_dev_prim_subcat_show);
+
+ssize_t wlp_dev_prim_subcat_store(struct wlp *wlp, const char *buf,
+				  size_t size)
+{
+	ssize_t result;
+	unsigned sub;
+	__le16 max_sub = ~0;
+	mutex_lock(&wlp->mutex);
+	if (wlp->dev_info == NULL) {
+		result = __wlp_alloc_device_info(wlp);
+		if (result < 0)
+			goto out;
+	}
+	result = sscanf(buf, "%u", &sub);
+	if (sub <= max_sub)
+		wlp->dev_info->prim_dev_type.subID = sub;
+	else
+		result = -EINVAL;
+out:
+	mutex_unlock(&wlp->mutex);
+	return result < 0 ? result : size;
+}
+EXPORT_SYMBOL_GPL(wlp_dev_prim_subcat_store);
+
+/**
+ * Subsystem implementation for interaction with individual WSS via sysfs
+ *
+ * Followed instructions for subsystem in Documentation/filesystems/sysfs.txt
+ */
+
+#define kobj_to_wlp_wss(obj) container_of(obj, struct wlp_wss, kobj)
+#define attr_to_wlp_wss_attr(_attr) \
+	container_of(_attr, struct wlp_wss_attribute, attr)
+
+/**
+ * Sysfs subsystem: forward read calls
+ *
+ * Sysfs operation for forwarding read call to the show method of the
+ * attribute owner
+ */
+static
+ssize_t wlp_wss_attr_show(struct kobject *kobj, struct attribute *attr,
+			  char *buf)
+{
+	struct wlp_wss_attribute *wss_attr = attr_to_wlp_wss_attr(attr);
+	struct wlp_wss *wss = kobj_to_wlp_wss(kobj);
+	ssize_t ret = -EIO;
+
+	if (wss_attr->show)
+		ret = wss_attr->show(wss, buf);
+	return ret;
+}
+/**
+ * Sysfs subsystem: forward write calls
+ *
+ * Sysfs operation for forwarding write call to the store method of the
+ * attribute owner
+ */
+static
+ssize_t wlp_wss_attr_store(struct kobject *kobj, struct attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct wlp_wss_attribute *wss_attr = attr_to_wlp_wss_attr(attr);
+	struct wlp_wss *wss = kobj_to_wlp_wss(kobj);
+	ssize_t ret = -EIO;
+
+	if (wss_attr->store)
+		ret = wss_attr->store(wss, buf, count);
+	return ret;
+}
+
+static
+struct sysfs_ops wss_sysfs_ops = {
+	.show	= wlp_wss_attr_show,
+	.store	= wlp_wss_attr_store,
+};
+
+struct kobj_type wss_ktype = {
+	.release	= wlp_wss_release,
+	.sysfs_ops	= &wss_sysfs_ops,
+};
+
+
+/**
+ * Sysfs files for individual WSS
+ */
+
+/**
+ * Print static properties of this WSS
+ *
+ * The name of a WSS may not be null teminated. It's max size is 64 bytes
+ * so we copy it to a larger array just to make sure we print sane data.
+ */
+static ssize_t wlp_wss_properties_show(struct wlp_wss *wss, char *buf)
+{
+	int result = 0;
+
+	if (mutex_lock_interruptible(&wss->mutex))
+		goto out;
+	result = __wlp_wss_properties_show(wss, buf, PAGE_SIZE);
+	mutex_unlock(&wss->mutex);
+out:
+	return result;
+}
+WSS_ATTR(properties, S_IRUGO, wlp_wss_properties_show, NULL);
+
+/**
+ * Print all connected members of this WSS
+ * The EDA cache contains all members of WSS neighborhood.
+ */
+static ssize_t wlp_wss_members_show(struct wlp_wss *wss, char *buf)
+{
+	struct wlp *wlp = container_of(wss, struct wlp, wss);
+	return wlp_eda_show(wlp, buf);
+}
+WSS_ATTR(members, S_IRUGO, wlp_wss_members_show, NULL);
+
+static
+const char *__wlp_strstate[] = {
+	"none",
+	"partially enrolled",
+	"enrolled",
+	"active",
+	"connected",
+};
+
+static const char *wlp_wss_strstate(unsigned state)
+{
+	if (state >= ARRAY_SIZE(__wlp_strstate))
+		return "unknown state";
+	return __wlp_strstate[state];
+}
+
+/*
+ * Print current state of this WSS
+ */
+static ssize_t wlp_wss_state_show(struct wlp_wss *wss, char *buf)
+{
+	int result = 0;
+
+	if (mutex_lock_interruptible(&wss->mutex))
+		goto out;
+	result = scnprintf(buf, PAGE_SIZE, "%s\n",
+			   wlp_wss_strstate(wss->state));
+	mutex_unlock(&wss->mutex);
+out:
+	return result;
+}
+WSS_ATTR(state, S_IRUGO, wlp_wss_state_show, NULL);
+
+
+static
+struct attribute *wss_attrs[] = {
+	&wss_attr_properties.attr,
+	&wss_attr_members.attr,
+	&wss_attr_state.attr,
+	NULL,
+};
+
+struct attribute_group wss_attr_group = {
+	.name = NULL,	/* we want them in the same directory */
+	.attrs = wss_attrs,
+};
diff --git a/drivers/uwb/wlp/txrx.c b/drivers/uwb/wlp/txrx.c
new file mode 100644
index 0000000..c701bd1
--- /dev/null
+++ b/drivers/uwb/wlp/txrx.c
@@ -0,0 +1,374 @@
+/*
+ * WiMedia Logical Link Control Protocol (WLP)
+ * Message exchange infrastructure
+ *
+ * Copyright (C) 2007 Intel Corporation
+ * Reinette Chatre <reinette.chatre@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: Docs
+ *
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/wlp.h>
+#define D_LOCAL 5
+#include <linux/uwb/debug.h>
+#include "wlp-internal.h"
+
+
+/**
+ * Direct incoming association msg to correct parsing routine
+ *
+ * We only expect D1, E1, C1, C3 messages as new. All other incoming
+ * association messages should form part of an established session that is
+ * handled elsewhere.
+ * The handling of these messages often require calling sleeping functions
+ * - this cannot be done in interrupt context. We use the kernel's
+ * workqueue to handle these messages.
+ */
+static
+void wlp_direct_assoc_frame(struct wlp *wlp, struct sk_buff *skb,
+			   struct uwb_dev_addr *src)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct wlp_frame_assoc *assoc = (void *) skb->data;
+	struct wlp_assoc_frame_ctx *frame_ctx;
+	d_fnstart(5, dev, "wlp %p, skb %p\n", wlp, skb);
+	frame_ctx = kmalloc(sizeof(*frame_ctx), GFP_ATOMIC);
+	if (frame_ctx == NULL) {
+		dev_err(dev, "WLP: Unable to allocate memory for association "
+			"frame handling.\n");
+		kfree_skb(skb);
+		goto out;
+	}
+	frame_ctx->wlp = wlp;
+	frame_ctx->skb = skb;
+	frame_ctx->src = *src;
+	switch (assoc->type) {
+	case WLP_ASSOC_D1:
+		d_printf(5, dev, "Received a D1 frame.\n");
+		INIT_WORK(&frame_ctx->ws, wlp_handle_d1_frame);
+		schedule_work(&frame_ctx->ws);
+		break;
+	case WLP_ASSOC_E1:
+		d_printf(5, dev, "Received a E1 frame. FIXME?\n");
+		kfree_skb(skb); /* Temporary until we handle it */
+		kfree(frame_ctx); /* Temporary until we handle it */
+		break;
+	case WLP_ASSOC_C1:
+		d_printf(5, dev, "Received a C1 frame.\n");
+		INIT_WORK(&frame_ctx->ws, wlp_handle_c1_frame);
+		schedule_work(&frame_ctx->ws);
+		break;
+	case WLP_ASSOC_C3:
+		d_printf(5, dev, "Received a C3 frame.\n");
+		INIT_WORK(&frame_ctx->ws, wlp_handle_c3_frame);
+		schedule_work(&frame_ctx->ws);
+		break;
+	default:
+		dev_err(dev, "Received unexpected association frame. "
+			"Type = %d \n", assoc->type);
+		kfree_skb(skb);
+		kfree(frame_ctx);
+		break;
+	}
+out:
+	d_fnend(5, dev, "wlp %p\n", wlp);
+}
+
+/**
+ * Process incoming association frame
+ *
+ * Although it could be possible to deal with some incoming association
+ * messages without creating a new session we are keeping things simple. We
+ * do not accept new association messages if there is a session in progress
+ * and the messages do not belong to that session.
+ *
+ * If an association message arrives that causes the creation of a session
+ * (WLP_ASSOC_E1) while we are in the process of creating a session then we
+ * rely on the neighbor mutex to protect the data. That is, the new session
+ * will not be started until the previous is completed.
+ */
+static
+void wlp_receive_assoc_frame(struct wlp *wlp, struct sk_buff *skb,
+			     struct uwb_dev_addr *src)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct wlp_frame_assoc *assoc = (void *) skb->data;
+	struct wlp_session *session = wlp->session;
+	u8 version;
+	d_fnstart(5, dev, "wlp %p, skb %p\n", wlp, skb);
+
+	if (wlp_get_version(wlp, &assoc->version, &version,
+			    sizeof(assoc->version)) < 0)
+		goto error;
+	if (version != WLP_VERSION) {
+		dev_err(dev, "Unsupported WLP version in association "
+			"message.\n");
+		goto error;
+	}
+	if (session != NULL) {
+		/* Function that created this session is still holding the
+		 * &wlp->mutex to protect this session. */
+		if (assoc->type == session->exp_message ||
+		    assoc->type == WLP_ASSOC_F0) {
+			if (!memcmp(&session->neighbor_addr, src,
+				   sizeof(*src))) {
+				session->data = skb;
+				(session->cb)(wlp);
+			} else {
+				dev_err(dev, "Received expected message from "
+					"unexpected source.  Expected message "
+					"%d or F0 from %02x:%02x, but received "
+					"it from %02x:%02x. Dropping.\n",
+					session->exp_message,
+					session->neighbor_addr.data[1],
+					session->neighbor_addr.data[0],
+					src->data[1], src->data[0]);
+				goto error;
+			}
+		} else {
+			dev_err(dev, "Association already in progress. "
+				"Dropping.\n");
+			goto error;
+		}
+	} else {
+		wlp_direct_assoc_frame(wlp, skb, src);
+	}
+	d_fnend(5, dev, "wlp %p\n", wlp);
+	return;
+error:
+	kfree_skb(skb);
+	d_fnend(5, dev, "wlp %p\n", wlp);
+}
+
+/**
+ * Verify incoming frame is from connected neighbor, prep to pass to WLP client
+ *
+ * Verification proceeds according to WLP 0.99 [7.3.1]. The source address
+ * is used to determine which neighbor is sending the frame and the WSS tag
+ * is used to know to which WSS the frame belongs (we only support one WSS
+ * so this test is straight forward).
+ * With the WSS found we need to ensure that we are connected before
+ * allowing the exchange of data frames.
+ */
+static
+int wlp_verify_prep_rx_frame(struct wlp *wlp, struct sk_buff *skb,
+			     struct uwb_dev_addr *src)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	int result = -EINVAL;
+	struct wlp_eda_node eda_entry;
+	struct wlp_frame_std_abbrv_hdr *hdr = (void *) skb->data;
+
+	d_fnstart(6, dev, "wlp %p, skb %p \n", wlp, skb);
+	/*verify*/
+	result = wlp_copy_eda_node(&wlp->eda, src, &eda_entry);
+	if (result < 0) {
+		if (printk_ratelimit())
+			dev_err(dev, "WLP: Incoming frame is from unknown "
+				"neighbor %02x:%02x.\n", src->data[1],
+				src->data[0]);
+		goto out;
+	}
+	if (hdr->tag != eda_entry.tag) {
+		if (printk_ratelimit())
+			dev_err(dev, "WLP: Tag of incoming frame from "
+				"%02x:%02x does not match expected tag. "
+				"Received 0x%02x, expected 0x%02x. \n",
+				src->data[1], src->data[0], hdr->tag,
+				eda_entry.tag);
+		result = -EINVAL;
+		goto out;
+	}
+	if (eda_entry.state != WLP_WSS_CONNECTED) {
+		if (printk_ratelimit())
+			dev_err(dev, "WLP: Incoming frame from "
+				"%02x:%02x does is not from connected WSS.\n",
+				src->data[1], src->data[0]);
+		result = -EINVAL;
+		goto out;
+	}
+	/*prep*/
+	skb_pull(skb, sizeof(*hdr));
+out:
+	d_fnend(6, dev, "wlp %p, skb %p, result = %d \n", wlp, skb, result);
+	return result;
+}
+
+/**
+ * Receive a WLP frame from device
+ *
+ * @returns: 1 if calling function should free the skb
+ *           0 if it successfully handled skb and freed it
+ *           0 if error occured, will free skb in this case
+ */
+int wlp_receive_frame(struct device *dev, struct wlp *wlp, struct sk_buff *skb,
+		      struct uwb_dev_addr *src)
+{
+	unsigned len = skb->len;
+	void *ptr = skb->data;
+	struct wlp_frame_hdr *hdr;
+	int result = 0;
+
+	d_fnstart(6, dev, "skb (%p), len (%u)\n", skb, len);
+	if (len < sizeof(*hdr)) {
+		dev_err(dev, "Not enough data to parse WLP header.\n");
+		result = -EINVAL;
+		goto out;
+	}
+	hdr = ptr;
+	d_dump(6, dev, hdr, sizeof(*hdr));
+	if (le16_to_cpu(hdr->mux_hdr) != WLP_PROTOCOL_ID) {
+		dev_err(dev, "Not a WLP frame type.\n");
+		result = -EINVAL;
+		goto out;
+	}
+	switch (hdr->type) {
+	case WLP_FRAME_STANDARD:
+		if (len < sizeof(struct wlp_frame_std_abbrv_hdr)) {
+			dev_err(dev, "Not enough data to parse Standard "
+				"WLP header.\n");
+			goto out;
+		}
+		result = wlp_verify_prep_rx_frame(wlp, skb, src);
+		if (result < 0) {
+			if (printk_ratelimit())
+				dev_err(dev, "WLP: Verification of frame "
+					"from neighbor %02x:%02x failed.\n",
+					src->data[1], src->data[0]);
+			goto out;
+		}
+		result = 1;
+		break;
+	case WLP_FRAME_ABBREVIATED:
+		dev_err(dev, "Abbreviated frame received. FIXME?\n");
+		kfree_skb(skb);
+		break;
+	case WLP_FRAME_CONTROL:
+		dev_err(dev, "Control frame received. FIXME?\n");
+		kfree_skb(skb);
+		break;
+	case WLP_FRAME_ASSOCIATION:
+		if (len < sizeof(struct wlp_frame_assoc)) {
+			dev_err(dev, "Not enough data to parse Association "
+				"WLP header.\n");
+			goto out;
+		}
+		d_printf(5, dev, "Association frame received.\n");
+		wlp_receive_assoc_frame(wlp, skb, src);
+		break;
+	default:
+		dev_err(dev, "Invalid frame received.\n");
+		result = -EINVAL;
+		break;
+	}
+out:
+	if (result < 0) {
+		kfree_skb(skb);
+		result = 0;
+	}
+	d_fnend(6, dev, "skb (%p)\n", skb);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wlp_receive_frame);
+
+
+/**
+ * Verify frame from network stack, prepare for further transmission
+ *
+ * @skb:   the socket buffer that needs to be prepared for transmission (it
+ *         is in need of a WLP header). If this is a broadcast frame we take
+ *         over the entire transmission.
+ *         If it is a unicast the WSS connection should already be established
+ *         and transmission will be done by the calling function.
+ * @dst:   On return this will contain the device address to which the
+ *         frame is destined.
+ * @returns: 0 on success no tx : WLP header sucessfully applied to skb buffer,
+ *                                calling function can proceed with tx
+ *           1 on success with tx : WLP will take over transmission of this
+ *                                  frame
+ *           <0 on error
+ *
+ * The network stack (WLP client) is attempting to transmit a frame. We can
+ * only transmit data if a local WSS is at least active (connection will be
+ * done here if this is a broadcast frame and neighbor also has the WSS
+ * active).
+ *
+ * The frame can be either broadcast or unicast. Broadcast in a WSS is
+ * supported via multicast, but we don't support multicast yet (until
+ * devices start to support MAB IEs). If a broadcast frame needs to be
+ * transmitted it is treated as a unicast frame to each neighbor. In this
+ * case the WLP takes over transmission of the skb and returns 1
+ * to the caller to indicate so. Also, in this case, if a neighbor has the
+ * same WSS activated but is not connected then the WSS connection will be
+ * done at this time. The neighbor's virtual address will be learned at
+ * this time.
+ *
+ * The destination address in a unicast frame is the virtual address of the
+ * neighbor. This address only becomes known when a WSS connection is
+ * established. We thus rely on a broadcast frame to trigger the setup of
+ * WSS connections to all neighbors before we are able to send unicast
+ * frames to them. This seems reasonable as IP would usually use ARP first
+ * before any unicast frames are sent.
+ *
+ * If we are already connected to the neighbor (neighbor's virtual address
+ * is known) we just prepare the WLP header and the caller will continue to
+ * send the frame.
+ *
+ * A failure in this function usually indicates something that cannot be
+ * fixed automatically. So, if this function fails (@return < 0) the calling
+ * function should not retry to send the frame as it will very likely keep
+ * failing.
+ *
+ */
+int wlp_prepare_tx_frame(struct device *dev, struct wlp *wlp,
+			 struct sk_buff *skb, struct uwb_dev_addr *dst)
+{
+	int result = -EINVAL;
+	struct ethhdr *eth_hdr = (void *) skb->data;
+
+	d_fnstart(6, dev, "wlp (%p), skb (%p) \n", wlp, skb);
+	if (is_broadcast_ether_addr(eth_hdr->h_dest)) {
+		d_printf(6, dev, "WLP: handling broadcast frame. \n");
+		result = wlp_eda_for_each(&wlp->eda, wlp_wss_send_copy, skb);
+		if (result < 0) {
+			if (printk_ratelimit())
+				dev_err(dev, "Unable to handle broadcast "
+					"frame from WLP client.\n");
+			goto out;
+		}
+		dev_kfree_skb_irq(skb);
+		result = 1;
+		/* Frame will be transmitted by WLP. */
+	} else {
+		d_printf(6, dev, "WLP: handling unicast frame. \n");
+		result = wlp_eda_for_virtual(&wlp->eda, eth_hdr->h_dest, dst,
+					     wlp_wss_prep_hdr, skb);
+		if (unlikely(result < 0)) {
+			if (printk_ratelimit())
+				dev_err(dev, "Unable to prepare "
+					"skb for transmission. \n");
+			goto out;
+		}
+	}
+out:
+	d_fnend(6, dev, "wlp (%p), skb (%p). result = %d \n", wlp, skb, result);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wlp_prepare_tx_frame);
diff --git a/drivers/uwb/wlp/wlp-internal.h b/drivers/uwb/wlp/wlp-internal.h
new file mode 100644
index 0000000..1c94fab
--- /dev/null
+++ b/drivers/uwb/wlp/wlp-internal.h
@@ -0,0 +1,228 @@
+/*
+ * WiMedia Logical Link Control Protocol (WLP)
+ * Internal API
+ *
+ * Copyright (C) 2007 Intel Corporation
+ * Reinette Chatre <reinette.chatre@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#ifndef __WLP_INTERNAL_H__
+#define __WLP_INTERNAL_H__
+
+/**
+ * State of WSS connection
+ *
+ * A device needs to connect to a neighbor in an activated WSS before data
+ * can be transmitted. The spec also distinguishes between a new connection
+ * attempt and a connection attempt after previous connection attempts. The
+ * state WLP_WSS_CONNECT_FAILED is used for this scenario. See WLP 0.99
+ * [7.2.6]
+ */
+enum wlp_wss_connect {
+	WLP_WSS_UNCONNECTED = 0,
+	WLP_WSS_CONNECTED,
+	WLP_WSS_CONNECT_FAILED,
+};
+
+extern struct kobj_type wss_ktype;
+extern struct attribute_group wss_attr_group;
+
+extern int uwb_rc_ie_add(struct uwb_rc *, const struct uwb_ie_hdr *, size_t);
+extern int uwb_rc_ie_rm(struct uwb_rc *, enum uwb_ie);
+
+
+/* This should be changed to a dynamic array where entries are sorted
+ * by eth_addr and search is done in a binary form
+ *
+ * Although thinking twice about it: this technologie's maximum reach
+ * is 10 meters...unless you want to pack too much stuff in around
+ * your radio controller/WLP device, the list will probably not be
+ * too big.
+ *
+ * In any case, there is probably some data structure in the kernel
+ * than we could reused for that already.
+ *
+ * The below structure is really just good while we support one WSS per
+ * host.
+ */
+struct wlp_eda_node {
+	struct list_head list_node;
+	unsigned char eth_addr[ETH_ALEN];
+	struct uwb_dev_addr dev_addr;
+	struct wlp_wss *wss;
+	unsigned char virt_addr[ETH_ALEN];
+	u8 tag;
+	enum wlp_wss_connect state;
+};
+
+typedef int (*wlp_eda_for_each_f)(struct wlp *, struct wlp_eda_node *, void *);
+
+extern void wlp_eda_init(struct wlp_eda *);
+extern void wlp_eda_release(struct wlp_eda *);
+extern int wlp_eda_create_node(struct wlp_eda *,
+			       const unsigned char eth_addr[ETH_ALEN],
+			       const struct uwb_dev_addr *);
+extern void wlp_eda_rm_node(struct wlp_eda *, const struct uwb_dev_addr *);
+extern int wlp_eda_update_node(struct wlp_eda *,
+			       const struct uwb_dev_addr *,
+			       struct wlp_wss *,
+			       const unsigned char virt_addr[ETH_ALEN],
+			       const u8, const enum wlp_wss_connect);
+extern int wlp_eda_update_node_state(struct wlp_eda *,
+				     const struct uwb_dev_addr *,
+				     const enum wlp_wss_connect);
+
+extern int wlp_copy_eda_node(struct wlp_eda *, struct uwb_dev_addr *,
+			     struct wlp_eda_node *);
+extern int wlp_eda_for_each(struct wlp_eda *, wlp_eda_for_each_f , void *);
+extern int wlp_eda_for_virtual(struct wlp_eda *,
+			       const unsigned char eth_addr[ETH_ALEN],
+			       struct uwb_dev_addr *,
+			       wlp_eda_for_each_f , void *);
+
+
+extern void wlp_remove_neighbor_tmp_info(struct wlp_neighbor_e *);
+
+extern size_t wlp_wss_key_print(char *, size_t, u8 *);
+
+/* Function called when no more references to WSS exists */
+extern void wlp_wss_release(struct kobject *);
+
+extern void wlp_wss_reset(struct wlp_wss *);
+extern int wlp_wss_create_activate(struct wlp_wss *, struct wlp_uuid *,
+				   char *, unsigned, unsigned);
+extern int wlp_wss_enroll_activate(struct wlp_wss *, struct wlp_uuid *,
+				   struct uwb_dev_addr *);
+extern ssize_t wlp_discover(struct wlp *);
+
+extern int wlp_enroll_neighbor(struct wlp *, struct wlp_neighbor_e *,
+			       struct wlp_wss *, struct wlp_uuid *);
+extern int wlp_wss_is_active(struct wlp *, struct wlp_wss *,
+			     struct uwb_dev_addr *);
+
+struct wlp_assoc_conn_ctx {
+	struct work_struct ws;
+	struct wlp *wlp;
+	struct sk_buff *skb;
+	struct wlp_eda_node eda_entry;
+};
+
+
+extern int wlp_wss_connect_prep(struct wlp *, struct wlp_eda_node *, void *);
+extern int wlp_wss_send_copy(struct wlp *, struct wlp_eda_node *, void *);
+
+
+/* Message handling */
+struct wlp_assoc_frame_ctx {
+	struct work_struct ws;
+	struct wlp *wlp;
+	struct sk_buff *skb;
+	struct uwb_dev_addr src;
+};
+
+extern int wlp_wss_prep_hdr(struct wlp *, struct wlp_eda_node *, void *);
+extern void wlp_handle_d1_frame(struct work_struct *);
+extern int wlp_parse_d2_frame_to_cache(struct wlp *, struct sk_buff *,
+				       struct wlp_neighbor_e *);
+extern int wlp_parse_d2_frame_to_enroll(struct wlp_wss *, struct sk_buff *,
+					struct wlp_neighbor_e *,
+					struct wlp_uuid *);
+extern void wlp_handle_c1_frame(struct work_struct *);
+extern void wlp_handle_c3_frame(struct work_struct *);
+extern int wlp_parse_c3c4_frame(struct wlp *, struct sk_buff *,
+				struct wlp_uuid *, u8 *,
+				struct uwb_mac_addr *);
+extern int wlp_parse_f0(struct wlp *, struct sk_buff *);
+extern int wlp_send_assoc_frame(struct wlp *, struct wlp_wss *,
+				struct uwb_dev_addr *, enum wlp_assoc_type);
+extern ssize_t wlp_get_version(struct wlp *, struct wlp_attr_version *,
+			       u8 *, ssize_t);
+extern ssize_t wlp_get_wssid(struct wlp *, struct wlp_attr_wssid *,
+			     struct wlp_uuid *, ssize_t);
+extern int __wlp_alloc_device_info(struct wlp *);
+extern int __wlp_setup_device_info(struct wlp *);
+
+extern struct wlp_wss_attribute wss_attribute_properties;
+extern struct wlp_wss_attribute wss_attribute_members;
+extern struct wlp_wss_attribute wss_attribute_state;
+
+static inline
+size_t wlp_wss_uuid_print(char *buf, size_t bufsize, struct wlp_uuid *uuid)
+{
+	size_t result;
+
+	result = scnprintf(buf, bufsize,
+			  "%02x:%02x:%02x:%02x:%02x:%02x:"
+			  "%02x:%02x:%02x:%02x:%02x:%02x:"
+			  "%02x:%02x:%02x:%02x",
+			  uuid->data[0], uuid->data[1],
+			  uuid->data[2], uuid->data[3],
+			  uuid->data[4], uuid->data[5],
+			  uuid->data[6], uuid->data[7],
+			  uuid->data[8], uuid->data[9],
+			  uuid->data[10], uuid->data[11],
+			  uuid->data[12], uuid->data[13],
+			  uuid->data[14], uuid->data[15]);
+	return result;
+}
+
+/**
+ * FIXME: How should a nonce be displayed?
+ */
+static inline
+size_t wlp_wss_nonce_print(char *buf, size_t bufsize, struct wlp_nonce *nonce)
+{
+	size_t result;
+
+	result = scnprintf(buf, bufsize,
+			  "%02x %02x %02x %02x %02x %02x "
+			  "%02x %02x %02x %02x %02x %02x "
+			  "%02x %02x %02x %02x",
+			  nonce->data[0], nonce->data[1],
+			  nonce->data[2], nonce->data[3],
+			  nonce->data[4], nonce->data[5],
+			  nonce->data[6], nonce->data[7],
+			  nonce->data[8], nonce->data[9],
+			  nonce->data[10], nonce->data[11],
+			  nonce->data[12], nonce->data[13],
+			  nonce->data[14], nonce->data[15]);
+	return result;
+}
+
+
+static inline
+void wlp_session_cb(struct wlp *wlp)
+{
+	struct completion *completion = wlp->session->cb_priv;
+	complete(completion);
+}
+
+static inline
+int wlp_uuid_is_set(struct wlp_uuid *uuid)
+{
+	struct wlp_uuid zero_uuid = { .data = { 0x00, 0x00, 0x00, 0x00,
+						0x00, 0x00, 0x00, 0x00,
+						0x00, 0x00, 0x00, 0x00,
+						0x00, 0x00, 0x00, 0x00} };
+
+	if (!memcmp(uuid, &zero_uuid, sizeof(*uuid)))
+		return 0;
+	return 1;
+}
+
+#endif /* __WLP_INTERNAL_H__ */
diff --git a/drivers/uwb/wlp/wlp-lc.c b/drivers/uwb/wlp/wlp-lc.c
new file mode 100644
index 0000000..0799402e
--- /dev/null
+++ b/drivers/uwb/wlp/wlp-lc.c
@@ -0,0 +1,585 @@
+/*
+ * WiMedia Logical Link Control Protocol (WLP)
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Reinette Chatre <reinette.chatre@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#include <linux/wlp.h>
+#define D_LOCAL 6
+#include <linux/uwb/debug.h>
+#include "wlp-internal.h"
+
+
+static
+void wlp_neighbor_init(struct wlp_neighbor_e *neighbor)
+{
+	INIT_LIST_HEAD(&neighbor->wssid);
+}
+
+/**
+ * Create area for device information storage
+ *
+ * wlp->mutex must be held
+ */
+int __wlp_alloc_device_info(struct wlp *wlp)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	BUG_ON(wlp->dev_info != NULL);
+	wlp->dev_info = kzalloc(sizeof(struct wlp_device_info), GFP_KERNEL);
+	if (wlp->dev_info == NULL) {
+		dev_err(dev, "WLP: Unable to allocate memory for "
+			"device information.\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+
+/**
+ * Fill in device information using function provided by driver
+ *
+ * wlp->mutex must be held
+ */
+static
+void __wlp_fill_device_info(struct wlp *wlp)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+
+	BUG_ON(wlp->fill_device_info == NULL);
+	d_printf(6, dev, "Retrieving device information "
+			 "from device driver.\n");
+	wlp->fill_device_info(wlp, wlp->dev_info);
+}
+
+/**
+ * Setup device information
+ *
+ * Allocate area for device information and populate it.
+ *
+ * wlp->mutex must be held
+ */
+int __wlp_setup_device_info(struct wlp *wlp)
+{
+	int result;
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+
+	result = __wlp_alloc_device_info(wlp);
+	if (result < 0) {
+		dev_err(dev, "WLP: Unable to allocate area for "
+			"device information.\n");
+		return result;
+	}
+	__wlp_fill_device_info(wlp);
+	return 0;
+}
+
+/**
+ * Remove information about neighbor stored temporarily
+ *
+ * Information learned during discovey should only be stored when the
+ * device enrolls in the neighbor's WSS. We do need to store this
+ * information temporarily in order to present it to the user.
+ *
+ * We are only interested in keeping neighbor WSS information if that
+ * neighbor is accepting enrollment.
+ *
+ * should be called with wlp->nbmutex held
+ */
+void wlp_remove_neighbor_tmp_info(struct wlp_neighbor_e *neighbor)
+{
+	struct wlp_wssid_e *wssid_e, *next;
+	u8 keep;
+	if (!list_empty(&neighbor->wssid)) {
+		list_for_each_entry_safe(wssid_e, next, &neighbor->wssid,
+					 node) {
+			if (wssid_e->info != NULL) {
+				keep = wssid_e->info->accept_enroll;
+				kfree(wssid_e->info);
+				wssid_e->info = NULL;
+				if (!keep) {
+					list_del(&wssid_e->node);
+					kfree(wssid_e);
+				}
+			}
+		}
+	}
+	if (neighbor->info != NULL) {
+		kfree(neighbor->info);
+		neighbor->info = NULL;
+	}
+}
+
+/**
+ * Populate WLP neighborhood cache with neighbor information
+ *
+ * A new neighbor is found. If it is discoverable then we add it to the
+ * neighborhood cache.
+ *
+ */
+static
+int wlp_add_neighbor(struct wlp *wlp, struct uwb_dev *dev)
+{
+	int result = 0;
+	int discoverable;
+	struct wlp_neighbor_e *neighbor;
+
+	d_fnstart(6, &dev->dev, "uwb %p \n", dev);
+	d_printf(6, &dev->dev, "Found neighbor device %02x:%02x \n",
+		 dev->dev_addr.data[1], dev->dev_addr.data[0]);
+	/**
+	 * FIXME:
+	 * Use contents of WLP IE found in beacon cache to determine if
+	 * neighbor is discoverable.
+	 * The device does not support WLP IE yet so this still needs to be
+	 * done. Until then we assume all devices are discoverable.
+	 */
+	discoverable = 1; /* will be changed when FIXME disappears */
+	if (discoverable) {
+		/* Add neighbor to cache for discovery */
+		neighbor = kzalloc(sizeof(*neighbor), GFP_KERNEL);
+		if (neighbor == NULL) {
+			dev_err(&dev->dev, "Unable to create memory for "
+				"new neighbor. \n");
+			result = -ENOMEM;
+			goto error_no_mem;
+		}
+		wlp_neighbor_init(neighbor);
+		uwb_dev_get(dev);
+		neighbor->uwb_dev = dev;
+		list_add(&neighbor->node, &wlp->neighbors);
+	}
+error_no_mem:
+	d_fnend(6, &dev->dev, "uwb %p, result = %d \n", dev, result);
+	return result;
+}
+
+/**
+ * Remove one neighbor from cache
+ */
+static
+void __wlp_neighbor_release(struct wlp_neighbor_e *neighbor)
+{
+	struct wlp_wssid_e *wssid_e, *next_wssid_e;
+
+	list_for_each_entry_safe(wssid_e, next_wssid_e,
+				 &neighbor->wssid, node) {
+		list_del(&wssid_e->node);
+		kfree(wssid_e);
+	}
+	uwb_dev_put(neighbor->uwb_dev);
+	list_del(&neighbor->node);
+	kfree(neighbor);
+}
+
+/**
+ * Clear entire neighborhood cache.
+ */
+static
+void __wlp_neighbors_release(struct wlp *wlp)
+{
+	struct wlp_neighbor_e *neighbor, *next;
+	if (list_empty(&wlp->neighbors))
+		return;
+	list_for_each_entry_safe(neighbor, next, &wlp->neighbors, node) {
+		__wlp_neighbor_release(neighbor);
+	}
+}
+
+static
+void wlp_neighbors_release(struct wlp *wlp)
+{
+	mutex_lock(&wlp->nbmutex);
+	__wlp_neighbors_release(wlp);
+	mutex_unlock(&wlp->nbmutex);
+}
+
+
+
+/**
+ * Send D1 message to neighbor, receive D2 message
+ *
+ * @neighbor: neighbor to which D1 message will be sent
+ * @wss:      if not NULL, it is an enrollment request for this WSS
+ * @wssid:    if wss not NULL, this is the wssid of the WSS in which we
+ *            want to enroll
+ *
+ * A D1/D2 exchange is done for one of two reasons: discovery or
+ * enrollment. If done for discovery the D1 message is sent to the neighbor
+ * and the contents of the D2 response is stored in a temporary cache.
+ * If done for enrollment the @wss and @wssid are provided also. In this
+ * case the D1 message is sent to the neighbor, the D2 response is parsed
+ * for enrollment of the WSS with wssid.
+ *
+ * &wss->mutex is held
+ */
+static
+int wlp_d1d2_exchange(struct wlp *wlp, struct wlp_neighbor_e *neighbor,
+		      struct wlp_wss *wss, struct wlp_uuid *wssid)
+{
+	int result;
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	DECLARE_COMPLETION_ONSTACK(completion);
+	struct wlp_session session;
+	struct sk_buff  *skb;
+	struct wlp_frame_assoc *resp;
+	struct uwb_dev_addr *dev_addr = &neighbor->uwb_dev->dev_addr;
+
+	mutex_lock(&wlp->mutex);
+	if (!wlp_uuid_is_set(&wlp->uuid)) {
+		dev_err(dev, "WLP: UUID is not set. Set via sysfs to "
+			"proceed.\n");
+		result = -ENXIO;
+		goto out;
+	}
+	/* Send D1 association frame */
+	result = wlp_send_assoc_frame(wlp, wss, dev_addr, WLP_ASSOC_D1);
+	if (result < 0) {
+		dev_err(dev, "Unable to send D1 frame to neighbor "
+			"%02x:%02x (%d)\n", dev_addr->data[1],
+			dev_addr->data[0], result);
+		d_printf(6, dev, "Add placeholders into buffer next to "
+			 "neighbor information we have (dev address).\n");
+		goto out;
+	}
+	/* Create session, wait for response */
+	session.exp_message = WLP_ASSOC_D2;
+	session.cb = wlp_session_cb;
+	session.cb_priv = &completion;
+	session.neighbor_addr = *dev_addr;
+	BUG_ON(wlp->session != NULL);
+	wlp->session = &session;
+	/* Wait for D2/F0 frame */
+	result = wait_for_completion_interruptible_timeout(&completion,
+						   WLP_PER_MSG_TIMEOUT * HZ);
+	if (result == 0) {
+		result = -ETIMEDOUT;
+		dev_err(dev, "Timeout while sending D1 to neighbor "
+			     "%02x:%02x.\n", dev_addr->data[1],
+			     dev_addr->data[0]);
+		goto error_session;
+	}
+	if (result < 0) {
+		dev_err(dev, "Unable to discover/enroll neighbor %02x:%02x.\n",
+			dev_addr->data[1], dev_addr->data[0]);
+		goto error_session;
+	}
+	/* Parse message in session->data: it will be either D2 or F0 */
+	skb = session.data;
+	resp = (void *) skb->data;
+	d_printf(6, dev, "Received response to D1 frame. \n");
+	d_dump(6, dev, skb->data, skb->len > 72 ? 72 : skb->len);
+
+	if (resp->type == WLP_ASSOC_F0) {
+		result = wlp_parse_f0(wlp, skb);
+		if (result < 0)
+			dev_err(dev, "WLP: Unable to parse F0 from neighbor "
+				"%02x:%02x.\n", dev_addr->data[1],
+				dev_addr->data[0]);
+		result = -EINVAL;
+		goto error_resp_parse;
+	}
+	if (wss == NULL) {
+		/* Discovery */
+		result = wlp_parse_d2_frame_to_cache(wlp, skb, neighbor);
+		if (result < 0) {
+			dev_err(dev, "WLP: Unable to parse D2 message from "
+				"neighbor %02x:%02x for discovery.\n",
+				dev_addr->data[1], dev_addr->data[0]);
+			goto error_resp_parse;
+		}
+	} else {
+		/* Enrollment */
+		result = wlp_parse_d2_frame_to_enroll(wss, skb, neighbor,
+						      wssid);
+		if (result < 0) {
+			dev_err(dev, "WLP: Unable to parse D2 message from "
+				"neighbor %02x:%02x for enrollment.\n",
+				dev_addr->data[1], dev_addr->data[0]);
+			goto error_resp_parse;
+		}
+	}
+error_resp_parse:
+	kfree_skb(skb);
+error_session:
+	wlp->session = NULL;
+out:
+	mutex_unlock(&wlp->mutex);
+	return result;
+}
+
+/**
+ * Enroll into WSS of provided WSSID by using neighbor as registrar
+ *
+ * &wss->mutex is held
+ */
+int wlp_enroll_neighbor(struct wlp *wlp, struct wlp_neighbor_e *neighbor,
+			struct wlp_wss *wss, struct wlp_uuid *wssid)
+{
+	int result = 0;
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	char buf[WLP_WSS_UUID_STRSIZE];
+	struct uwb_dev_addr *dev_addr = &neighbor->uwb_dev->dev_addr;
+	wlp_wss_uuid_print(buf, sizeof(buf), wssid);
+	d_fnstart(6, dev, "wlp %p, neighbor %p, wss %p, wssid %p (%s)\n",
+		  wlp, neighbor, wss, wssid, buf);
+	d_printf(6, dev, "Complete me.\n");
+	result =  wlp_d1d2_exchange(wlp, neighbor, wss, wssid);
+	if (result < 0) {
+		dev_err(dev, "WLP: D1/D2 message exchange for enrollment "
+			"failed. result = %d \n", result);
+		goto out;
+	}
+	if (wss->state != WLP_WSS_STATE_PART_ENROLLED) {
+		dev_err(dev, "WLP: Unable to enroll into WSS %s using "
+			"neighbor %02x:%02x. \n", buf,
+			dev_addr->data[1], dev_addr->data[0]);
+		result = -EINVAL;
+		goto out;
+	}
+	if (wss->secure_status == WLP_WSS_SECURE) {
+		dev_err(dev, "FIXME: need to complete secure enrollment.\n");
+		result = -EINVAL;
+		goto error;
+	} else {
+		wss->state = WLP_WSS_STATE_ENROLLED;
+		d_printf(2, dev, "WLP: Success Enrollment into unsecure WSS "
+			 "%s using neighbor %02x:%02x. \n", buf,
+			 dev_addr->data[1], dev_addr->data[0]);
+	}
+
+	d_fnend(6, dev, "wlp %p, neighbor %p, wss %p, wssid %p (%s)\n",
+		  wlp, neighbor, wss, wssid, buf);
+out:
+	return result;
+error:
+	wlp_wss_reset(wss);
+	return result;
+}
+
+/**
+ * Discover WSS information of neighbor's active WSS
+ */
+static
+int wlp_discover_neighbor(struct wlp *wlp,
+			  struct wlp_neighbor_e *neighbor)
+{
+	return wlp_d1d2_exchange(wlp, neighbor, NULL, NULL);
+}
+
+
+/**
+ * Each neighbor in the neighborhood cache is discoverable. Discover it.
+ *
+ * Discovery is done through sending of D1 association frame and parsing
+ * the D2 association frame response. Only wssid from D2 will be included
+ * in neighbor cache, rest is just displayed to user and forgotten.
+ *
+ * The discovery is not done in parallel. This is simple and enables us to
+ * maintain only one association context.
+ *
+ * The discovery of one neighbor does not affect the other, but if the
+ * discovery of a neighbor fails it is removed from the neighborhood cache.
+ */
+static
+int wlp_discover_all_neighbors(struct wlp *wlp)
+{
+	int result = 0;
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct wlp_neighbor_e *neighbor, *next;
+
+	list_for_each_entry_safe(neighbor, next, &wlp->neighbors, node) {
+		result = wlp_discover_neighbor(wlp, neighbor);
+		if (result < 0) {
+			dev_err(dev, "WLP: Unable to discover neighbor "
+				"%02x:%02x, removing from neighborhood. \n",
+				neighbor->uwb_dev->dev_addr.data[1],
+				neighbor->uwb_dev->dev_addr.data[0]);
+			__wlp_neighbor_release(neighbor);
+		}
+	}
+	return result;
+}
+
+static int wlp_add_neighbor_helper(struct device *dev, void *priv)
+{
+	struct wlp *wlp = priv;
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+
+	return wlp_add_neighbor(wlp, uwb_dev);
+}
+
+/**
+ * Discover WLP neighborhood
+ *
+ * Will send D1 association frame to all devices in beacon group that have
+ * discoverable bit set in WLP IE. D2 frames will be received, information
+ * displayed to user in @buf. Partial information (from D2 association
+ * frame) will be cached to assist with future association
+ * requests.
+ *
+ * The discovery of the WLP neighborhood is triggered by the user. This
+ * should occur infrequently and we thus free current cache and re-allocate
+ * memory if needed.
+ *
+ * If one neighbor fails during initial discovery (determining if it is a
+ * neighbor or not), we fail all - note that interaction with neighbor has
+ * not occured at this point so if a failure occurs we know something went wrong
+ * locally. We thus undo everything.
+ */
+ssize_t wlp_discover(struct wlp *wlp)
+{
+	int result = 0;
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+
+	d_fnstart(6, dev, "wlp %p \n", wlp);
+	mutex_lock(&wlp->nbmutex);
+	/* Clear current neighborhood cache. */
+	__wlp_neighbors_release(wlp);
+	/* Determine which devices in neighborhood. Repopulate cache. */
+	result = uwb_dev_for_each(wlp->rc, wlp_add_neighbor_helper, wlp);
+	if (result < 0) {
+		/* May have partial neighbor information, release all. */
+		__wlp_neighbors_release(wlp);
+		goto error_dev_for_each;
+	}
+	/* Discover the properties of devices in neighborhood. */
+	result = wlp_discover_all_neighbors(wlp);
+	/* In case of failure we still print our partial results. */
+	if (result < 0) {
+		dev_err(dev, "Unable to fully discover neighborhood. \n");
+		result = 0;
+	}
+error_dev_for_each:
+	mutex_unlock(&wlp->nbmutex);
+	d_fnend(6, dev, "wlp %p \n", wlp);
+	return result;
+}
+
+/**
+ * Handle events from UWB stack
+ *
+ * We handle events conservatively. If a neighbor goes off the air we
+ * remove it from the neighborhood. If an association process is in
+ * progress this function will block waiting for the nbmutex to become
+ * free. The association process will thus be allowed to complete before it
+ * is removed.
+ */
+static
+void wlp_uwb_notifs_cb(void *_wlp, struct uwb_dev *uwb_dev,
+		       enum uwb_notifs event)
+{
+	struct wlp *wlp = _wlp;
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct wlp_neighbor_e *neighbor, *next;
+	int result;
+	switch (event) {
+	case UWB_NOTIF_ONAIR:
+		d_printf(6, dev, "UWB device %02x:%02x is onair\n",
+				uwb_dev->dev_addr.data[1],
+				uwb_dev->dev_addr.data[0]);
+		result = wlp_eda_create_node(&wlp->eda,
+					     uwb_dev->mac_addr.data,
+					     &uwb_dev->dev_addr);
+		if (result < 0)
+			dev_err(dev, "WLP: Unable to add new neighbor "
+				"%02x:%02x to EDA cache.\n",
+				uwb_dev->dev_addr.data[1],
+				uwb_dev->dev_addr.data[0]);
+		break;
+	case UWB_NOTIF_OFFAIR:
+		d_printf(6, dev, "UWB device %02x:%02x is offair\n",
+				uwb_dev->dev_addr.data[1],
+				uwb_dev->dev_addr.data[0]);
+		wlp_eda_rm_node(&wlp->eda, &uwb_dev->dev_addr);
+		mutex_lock(&wlp->nbmutex);
+		list_for_each_entry_safe(neighbor, next, &wlp->neighbors,
+					 node) {
+			if (neighbor->uwb_dev == uwb_dev) {
+				d_printf(6, dev, "Removing device from "
+					 "neighborhood.\n");
+				__wlp_neighbor_release(neighbor);
+			}
+		}
+		mutex_unlock(&wlp->nbmutex);
+		break;
+	default:
+		dev_err(dev, "don't know how to handle event %d from uwb\n",
+				event);
+	}
+}
+
+int wlp_setup(struct wlp *wlp, struct uwb_rc *rc)
+{
+	struct device *dev = &rc->uwb_dev.dev;
+	int result;
+
+	d_fnstart(6, dev, "wlp %p\n", wlp);
+	BUG_ON(wlp->fill_device_info == NULL);
+	BUG_ON(wlp->xmit_frame == NULL);
+	BUG_ON(wlp->stop_queue == NULL);
+	BUG_ON(wlp->start_queue == NULL);
+	wlp->rc = rc;
+	wlp_eda_init(&wlp->eda);/* Set up address cache */
+	wlp->uwb_notifs_handler.cb = wlp_uwb_notifs_cb;
+	wlp->uwb_notifs_handler.data = wlp;
+	uwb_notifs_register(rc, &wlp->uwb_notifs_handler);
+
+	uwb_pal_init(&wlp->pal);
+	result = uwb_pal_register(rc, &wlp->pal);
+	if (result < 0)
+		uwb_notifs_deregister(wlp->rc, &wlp->uwb_notifs_handler);
+
+	d_fnend(6, dev, "wlp %p, result = %d\n", wlp, result);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wlp_setup);
+
+void wlp_remove(struct wlp *wlp)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	d_fnstart(6, dev, "wlp %p\n", wlp);
+	wlp_neighbors_release(wlp);
+	uwb_pal_unregister(wlp->rc, &wlp->pal);
+	uwb_notifs_deregister(wlp->rc, &wlp->uwb_notifs_handler);
+	wlp_eda_release(&wlp->eda);
+	mutex_lock(&wlp->mutex);
+	if (wlp->dev_info != NULL)
+		kfree(wlp->dev_info);
+	mutex_unlock(&wlp->mutex);
+	wlp->rc = NULL;
+	/* We have to use NULL here because this function can be called
+	 * when the device disappeared. */
+	d_fnend(6, NULL, "wlp %p\n", wlp);
+}
+EXPORT_SYMBOL_GPL(wlp_remove);
+
+/**
+ * wlp_reset_all - reset the WLP hardware
+ * @wlp: the WLP device to reset.
+ *
+ * This schedules a full hardware reset of the WLP device.  The radio
+ * controller and any other PALs will also be reset.
+ */
+void wlp_reset_all(struct wlp *wlp)
+{
+	uwb_rc_reset_all(wlp->rc);
+}
+EXPORT_SYMBOL_GPL(wlp_reset_all);
diff --git a/drivers/uwb/wlp/wss-lc.c b/drivers/uwb/wlp/wss-lc.c
new file mode 100644
index 0000000..96b18c9
--- /dev/null
+++ b/drivers/uwb/wlp/wss-lc.c
@@ -0,0 +1,1055 @@
+/*
+ * WiMedia Logical Link Control Protocol (WLP)
+ *
+ * Copyright (C) 2007 Intel Corporation
+ * Reinette Chatre <reinette.chatre@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Implementation of the WLP association protocol.
+ *
+ * FIXME: Docs
+ *
+ * A UWB network interface will configure a WSS through wlp_wss_setup() after
+ * the interface has been assigned a MAC address, typically after
+ * "ifconfig" has been called. When the interface goes down it should call
+ * wlp_wss_remove().
+ *
+ * When the WSS is ready for use the user interacts via sysfs to create,
+ * discover, and activate WSS.
+ *
+ * wlp_wss_enroll_activate()
+ *
+ * wlp_wss_create_activate()
+ * 	wlp_wss_set_wssid_hash()
+ * 		wlp_wss_comp_wssid_hash()
+ * 	wlp_wss_sel_bcast_addr()
+ * 	wlp_wss_sysfs_add()
+ *
+ * Called when no more references to WSS exist:
+ * 	wlp_wss_release()
+ * 		wlp_wss_reset()
+ */
+
+#include <linux/etherdevice.h> /* for is_valid_ether_addr */
+#include <linux/skbuff.h>
+#include <linux/wlp.h>
+#define D_LOCAL 5
+#include <linux/uwb/debug.h>
+#include "wlp-internal.h"
+
+
+size_t wlp_wss_key_print(char *buf, size_t bufsize, u8 *key)
+{
+	size_t result;
+
+	result = scnprintf(buf, bufsize,
+			  "%02x %02x %02x %02x %02x %02x "
+			  "%02x %02x %02x %02x %02x %02x "
+			  "%02x %02x %02x %02x",
+			  key[0], key[1], key[2], key[3],
+			  key[4], key[5], key[6], key[7],
+			  key[8], key[9], key[10], key[11],
+			  key[12], key[13], key[14], key[15]);
+	return result;
+}
+
+/**
+ * Compute WSSID hash
+ * WLP Draft 0.99 [7.2.1]
+ *
+ * The WSSID hash for a WSSID is the result of an octet-wise exclusive-OR
+ * of all octets in the WSSID.
+ */
+static
+u8 wlp_wss_comp_wssid_hash(struct wlp_uuid *wssid)
+{
+	return wssid->data[0]  ^ wssid->data[1]  ^ wssid->data[2]
+	       ^ wssid->data[3]  ^ wssid->data[4]  ^ wssid->data[5]
+	       ^ wssid->data[6]  ^ wssid->data[7]  ^ wssid->data[8]
+	       ^ wssid->data[9]  ^ wssid->data[10] ^ wssid->data[11]
+	       ^ wssid->data[12] ^ wssid->data[13] ^ wssid->data[14]
+	       ^ wssid->data[15];
+}
+
+/**
+ * Select a multicast EUI-48 for the WSS broadcast address.
+ * WLP Draft 0.99 [7.2.1]
+ *
+ * Selected based on the WiMedia Alliance OUI, 00-13-88, within the WLP
+ * range, [01-13-88-00-01-00, 01-13-88-00-01-FF] inclusive.
+ *
+ * This address is currently hardcoded.
+ * FIXME?
+ */
+static
+struct uwb_mac_addr wlp_wss_sel_bcast_addr(struct wlp_wss *wss)
+{
+	struct uwb_mac_addr bcast = {
+		.data = { 0x01, 0x13, 0x88, 0x00, 0x01, 0x00 }
+	};
+	return bcast;
+}
+
+/**
+ * Clear the contents of the WSS structure - all except kobj, mutex, virtual
+ *
+ * We do not want to reinitialize - the internal kobj should not change as
+ * it still points to the parent received during setup. The mutex should
+ * remain also. We thus just reset values individually.
+ * The virutal address assigned to WSS will remain the same for the
+ * lifetime of the WSS. We only reset the fields that can change during its
+ * lifetime.
+ */
+void wlp_wss_reset(struct wlp_wss *wss)
+{
+	struct wlp *wlp = container_of(wss, struct wlp, wss);
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	d_fnstart(5, dev, "wss (%p) \n", wss);
+	memset(&wss->wssid, 0, sizeof(wss->wssid));
+	wss->hash = 0;
+	memset(&wss->name[0], 0, sizeof(wss->name));
+	memset(&wss->bcast, 0, sizeof(wss->bcast));
+	wss->secure_status = WLP_WSS_UNSECURE;
+	memset(&wss->master_key[0], 0, sizeof(wss->master_key));
+	wss->tag = 0;
+	wss->state = WLP_WSS_STATE_NONE;
+	d_fnend(5, dev, "wss (%p) \n", wss);
+}
+
+/**
+ * Create sysfs infrastructure for WSS
+ *
+ * The WSS is configured to have the interface as parent (see wlp_wss_setup())
+ * a new sysfs directory that includes wssid as its name is created in the
+ * interface's sysfs directory. The group of files interacting with WSS are
+ * created also.
+ */
+static
+int wlp_wss_sysfs_add(struct wlp_wss *wss, char *wssid_str)
+{
+	struct wlp *wlp = container_of(wss, struct wlp, wss);
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	int result;
+
+	d_fnstart(5, dev, "wss (%p), wssid: %s\n", wss, wssid_str);
+	result = kobject_set_name(&wss->kobj, "wss-%s", wssid_str);
+	if (result < 0)
+		return result;
+	wss->kobj.ktype = &wss_ktype;
+	result = kobject_init_and_add(&wss->kobj,
+			&wss_ktype, wss->kobj.parent, "wlp");
+	if (result < 0) {
+		dev_err(dev, "WLP: Cannot register WSS kobject.\n");
+		goto error_kobject_register;
+	}
+	result = sysfs_create_group(&wss->kobj, &wss_attr_group);
+	if (result < 0) {
+		dev_err(dev, "WLP: Cannot register WSS attributes: %d\n",
+			result);
+		goto error_sysfs_create_group;
+	}
+	d_fnend(5, dev, "Completed. result = %d \n", result);
+	return 0;
+error_sysfs_create_group:
+
+	kobject_put(&wss->kobj); /* will free name if needed */
+	return result;
+error_kobject_register:
+	kfree(wss->kobj.name);
+	wss->kobj.name = NULL;
+	wss->kobj.ktype = NULL;
+	return result;
+}
+
+
+/**
+ * Release WSS
+ *
+ * No more references exist to this WSS. We should undo everything that was
+ * done in wlp_wss_create_activate() except removing the group. The group
+ * is not removed because an object can be unregistered before the group is
+ * created. We also undo any additional operations on the WSS after this
+ * (addition of members).
+ *
+ * If memory was allocated for the kobject's name then it will
+ * be freed by the kobject system during this time.
+ *
+ * The EDA cache is removed and reinitilized when the WSS is removed. We
+ * thus loose knowledge of members of this WSS at that time and need not do
+ * it here.
+ */
+void wlp_wss_release(struct kobject *kobj)
+{
+	struct wlp_wss *wss = container_of(kobj, struct wlp_wss, kobj);
+
+	wlp_wss_reset(wss);
+}
+
+/**
+ * Enroll into a WSS using provided neighbor as registrar
+ *
+ * First search the neighborhood information to learn which neighbor is
+ * referred to, next proceed with enrollment.
+ *
+ * &wss->mutex is held
+ */
+static
+int wlp_wss_enroll_target(struct wlp_wss *wss, struct wlp_uuid *wssid,
+			  struct uwb_dev_addr *dest)
+{
+	struct wlp *wlp = container_of(wss, struct wlp, wss);
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct wlp_neighbor_e *neighbor;
+	char buf[WLP_WSS_UUID_STRSIZE];
+	int result = -ENXIO;
+	struct uwb_dev_addr *dev_addr;
+
+	wlp_wss_uuid_print(buf, sizeof(buf), wssid);
+	d_fnstart(5, dev, "wss %p, wssid %s, registrar %02x:%02x \n",
+		  wss, buf, dest->data[1], dest->data[0]);
+	mutex_lock(&wlp->nbmutex);
+	list_for_each_entry(neighbor, &wlp->neighbors, node) {
+		dev_addr = &neighbor->uwb_dev->dev_addr;
+		if (!memcmp(dest, dev_addr, sizeof(*dest))) {
+			d_printf(5, dev, "Neighbor %02x:%02x is valid, "
+				 "enrolling. \n",
+				 dev_addr->data[1], dev_addr->data[0]);
+			result = wlp_enroll_neighbor(wlp, neighbor, wss,
+						     wssid);
+			break;
+		}
+	}
+	if (result == -ENXIO)
+		dev_err(dev, "WLP: Cannot find neighbor %02x:%02x. \n",
+			dest->data[1], dest->data[0]);
+	mutex_unlock(&wlp->nbmutex);
+	d_fnend(5, dev, "wss %p, wssid %s, registrar %02x:%02x, result %d \n",
+		  wss, buf, dest->data[1], dest->data[0], result);
+	return result;
+}
+
+/**
+ * Enroll into a WSS previously discovered
+ *
+ * User provides WSSID of WSS, search for neighbor that has this WSS
+ * activated and attempt to enroll.
+ *
+ * &wss->mutex is held
+ */
+static
+int wlp_wss_enroll_discovered(struct wlp_wss *wss, struct wlp_uuid *wssid)
+{
+	struct wlp *wlp = container_of(wss, struct wlp, wss);
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct wlp_neighbor_e *neighbor;
+	struct wlp_wssid_e *wssid_e;
+	char buf[WLP_WSS_UUID_STRSIZE];
+	int result = -ENXIO;
+
+	wlp_wss_uuid_print(buf, sizeof(buf), wssid);
+	d_fnstart(5, dev, "wss %p, wssid %s \n", wss, buf);
+	mutex_lock(&wlp->nbmutex);
+	list_for_each_entry(neighbor, &wlp->neighbors, node) {
+		list_for_each_entry(wssid_e, &neighbor->wssid, node) {
+			if (!memcmp(wssid, &wssid_e->wssid, sizeof(*wssid))) {
+				d_printf(5, dev, "Found WSSID %s in neighbor "
+					 "%02x:%02x cache. \n", buf,
+					 neighbor->uwb_dev->dev_addr.data[1],
+					 neighbor->uwb_dev->dev_addr.data[0]);
+				result = wlp_enroll_neighbor(wlp, neighbor,
+							     wss, wssid);
+				if (result == 0) /* enrollment success */
+					goto out;
+				break;
+			}
+		}
+	}
+out:
+	if (result == -ENXIO)
+		dev_err(dev, "WLP: Cannot find WSSID %s in cache. \n", buf);
+	mutex_unlock(&wlp->nbmutex);
+	d_fnend(5, dev, "wss %p, wssid %s, result %d \n", wss, buf, result);
+	return result;
+}
+
+/**
+ * Enroll into WSS with provided WSSID, registrar may be provided
+ *
+ * @wss: out WSS that will be enrolled
+ * @wssid: wssid of neighboring WSS that we want to enroll in
+ * @devaddr: registrar can be specified, will be broadcast (ff:ff) if any
+ *           neighbor can be used as registrar.
+ *
+ * &wss->mutex is held
+ */
+static
+int wlp_wss_enroll(struct wlp_wss *wss, struct wlp_uuid *wssid,
+		   struct uwb_dev_addr *devaddr)
+{
+	int result;
+	struct wlp *wlp = container_of(wss, struct wlp, wss);
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	char buf[WLP_WSS_UUID_STRSIZE];
+	struct uwb_dev_addr bcast = {.data = {0xff, 0xff} };
+
+	wlp_wss_uuid_print(buf, sizeof(buf), wssid);
+	if (wss->state != WLP_WSS_STATE_NONE) {
+		dev_err(dev, "WLP: Already enrolled in WSS %s.\n", buf);
+		result = -EEXIST;
+		goto error;
+	}
+	if (!memcmp(&bcast, devaddr, sizeof(bcast))) {
+		d_printf(5, dev, "Request to enroll in discovered WSS "
+			 "with WSSID %s \n", buf);
+		result = wlp_wss_enroll_discovered(wss, wssid);
+	} else {
+		d_printf(5, dev, "Request to enroll in WSSID %s with "
+			 "registrar %02x:%02x\n", buf, devaddr->data[1],
+			 devaddr->data[0]);
+		result = wlp_wss_enroll_target(wss, wssid, devaddr);
+	}
+	if (result < 0) {
+		dev_err(dev, "WLP: Unable to enroll into WSS %s, result %d \n",
+			buf, result);
+		goto error;
+	}
+	d_printf(2, dev, "Successfully enrolled into WSS %s \n", buf);
+	result = wlp_wss_sysfs_add(wss, buf);
+	if (result < 0) {
+		dev_err(dev, "WLP: Unable to set up sysfs for WSS kobject.\n");
+		wlp_wss_reset(wss);
+	}
+error:
+	return result;
+
+}
+
+/**
+ * Activate given WSS
+ *
+ * Prior to activation a WSS must be enrolled. To activate a WSS a device
+ * includes the WSS hash in the WLP IE in its beacon in each superframe.
+ * WLP 0.99 [7.2.5].
+ *
+ * The WSS tag is also computed at this time. We only support one activated
+ * WSS so we can use the hash as a tag - there will never be a conflict.
+ *
+ * We currently only support one activated WSS so only one WSS hash is
+ * included in the WLP IE.
+ */
+static
+int wlp_wss_activate(struct wlp_wss *wss)
+{
+	struct wlp *wlp = container_of(wss, struct wlp, wss);
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct uwb_rc *uwb_rc = wlp->rc;
+	int result;
+	struct {
+		struct wlp_ie wlp_ie;
+		u8 hash; /* only include one hash */
+	} ie_data;
+
+	d_fnstart(5, dev, "Activating WSS %p. \n", wss);
+	BUG_ON(wss->state != WLP_WSS_STATE_ENROLLED);
+	wss->hash = wlp_wss_comp_wssid_hash(&wss->wssid);
+	wss->tag = wss->hash;
+	memset(&ie_data, 0, sizeof(ie_data));
+	ie_data.wlp_ie.hdr.element_id = UWB_IE_WLP;
+	ie_data.wlp_ie.hdr.length = sizeof(ie_data) - sizeof(struct uwb_ie_hdr);
+	wlp_ie_set_hash_length(&ie_data.wlp_ie, sizeof(ie_data.hash));
+	ie_data.hash = wss->hash;
+	result = uwb_rc_ie_add(uwb_rc, &ie_data.wlp_ie.hdr,
+			       sizeof(ie_data));
+	if (result < 0) {
+		dev_err(dev, "WLP: Unable to add WLP IE to beacon. "
+			"result = %d.\n", result);
+		goto error_wlp_ie;
+	}
+	wss->state = WLP_WSS_STATE_ACTIVE;
+	result = 0;
+error_wlp_ie:
+	d_fnend(5, dev, "Activating WSS %p, result = %d \n", wss, result);
+	return result;
+}
+
+/**
+ * Enroll in and activate WSS identified by provided WSSID
+ *
+ * The neighborhood cache should contain a list of all neighbors and the
+ * WSS they have activated. Based on that cache we search which neighbor we
+ * can perform the association process with. The user also has option to
+ * specify which neighbor it prefers as registrar.
+ * Successful enrollment is followed by activation.
+ * Successful activation will create the sysfs directory containing
+ * specific information regarding this WSS.
+ */
+int wlp_wss_enroll_activate(struct wlp_wss *wss, struct wlp_uuid *wssid,
+			    struct uwb_dev_addr *devaddr)
+{
+	struct wlp *wlp = container_of(wss, struct wlp, wss);
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	int result = 0;
+	char buf[WLP_WSS_UUID_STRSIZE];
+
+	d_fnstart(5, dev, "Enrollment and activation requested. \n");
+	mutex_lock(&wss->mutex);
+	result = wlp_wss_enroll(wss, wssid, devaddr);
+	if (result < 0) {
+		wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid);
+		dev_err(dev, "WLP: Enrollment into WSS %s failed.\n", buf);
+		goto error_enroll;
+	}
+	result = wlp_wss_activate(wss);
+	if (result < 0) {
+		dev_err(dev, "WLP: Unable to activate WSS. Undoing enrollment "
+			"result = %d \n", result);
+		/* Undo enrollment */
+		wlp_wss_reset(wss);
+		goto error_activate;
+	}
+error_activate:
+error_enroll:
+	mutex_unlock(&wss->mutex);
+	d_fnend(5, dev, "Completed. result = %d \n", result);
+	return result;
+}
+
+/**
+ * Create, enroll, and activate a new WSS
+ *
+ * @wssid: new wssid provided by user
+ * @name:  WSS name requested by used.
+ * @sec_status: security status requested by user
+ *
+ * A user requested the creation of a new WSS. All operations are done
+ * locally. The new WSS will be stored locally, the hash will be included
+ * in the WLP IE, and the sysfs infrastructure for this WSS will be
+ * created.
+ */
+int wlp_wss_create_activate(struct wlp_wss *wss, struct wlp_uuid *wssid,
+			    char *name, unsigned sec_status, unsigned accept)
+{
+	struct wlp *wlp = container_of(wss, struct wlp, wss);
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	int result = 0;
+	char buf[WLP_WSS_UUID_STRSIZE];
+	d_fnstart(5, dev, "Request to create new WSS.\n");
+	result = wlp_wss_uuid_print(buf, sizeof(buf), wssid);
+	d_printf(5, dev, "Request to create WSS: WSSID=%s, name=%s, "
+		 "sec_status=%u, accepting enrollment=%u \n",
+		 buf, name, sec_status, accept);
+	if (!mutex_trylock(&wss->mutex)) {
+		dev_err(dev, "WLP: WLP association session in progress.\n");
+		return -EBUSY;
+	}
+	if (wss->state != WLP_WSS_STATE_NONE) {
+		dev_err(dev, "WLP: WSS already exists. Not creating new.\n");
+		result = -EEXIST;
+		goto out;
+	}
+	if (wss->kobj.parent == NULL) {
+		dev_err(dev, "WLP: WSS parent not ready. Is network interface "
+		       "up?\n");
+		result = -ENXIO;
+		goto out;
+	}
+	if (sec_status == WLP_WSS_SECURE) {
+		dev_err(dev, "WLP: FIXME Creation of secure WSS not "
+			"supported yet.\n");
+		result = -EINVAL;
+		goto out;
+	}
+	wss->wssid = *wssid;
+	memcpy(wss->name, name, sizeof(wss->name));
+	wss->bcast = wlp_wss_sel_bcast_addr(wss);
+	wss->secure_status = sec_status;
+	wss->accept_enroll = accept;
+	/*wss->virtual_addr is initialized in call to wlp_wss_setup*/
+	/* sysfs infrastructure */
+	result = wlp_wss_sysfs_add(wss, buf);
+	if (result < 0) {
+		dev_err(dev, "Cannot set up sysfs for WSS kobject.\n");
+		wlp_wss_reset(wss);
+		goto out;
+	} else
+		result = 0;
+	wss->state = WLP_WSS_STATE_ENROLLED;
+	result = wlp_wss_activate(wss);
+	if (result < 0) {
+		dev_err(dev, "WLP: Unable to activate WSS. Undoing "
+			"enrollment\n");
+		wlp_wss_reset(wss);
+		goto out;
+	}
+	result = 0;
+out:
+	mutex_unlock(&wss->mutex);
+	d_fnend(5, dev, "Completed. result = %d \n", result);
+	return result;
+}
+
+/**
+ * Determine if neighbor has WSS activated
+ *
+ * @returns: 1 if neighbor has WSS activated, zero otherwise
+ *
+ * This can be done in two ways:
+ * - send a C1 frame, parse C2/F0 response
+ * - examine the WLP IE sent by the neighbor
+ *
+ * The WLP IE is not fully supported in hardware so we use the C1/C2 frame
+ * exchange to determine if a WSS is activated. Using the WLP IE should be
+ * faster and should be used when it becomes possible.
+ */
+int wlp_wss_is_active(struct wlp *wlp, struct wlp_wss *wss,
+		      struct uwb_dev_addr *dev_addr)
+{
+	int result = 0;
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	char buf[WLP_WSS_UUID_STRSIZE];
+	DECLARE_COMPLETION_ONSTACK(completion);
+	struct wlp_session session;
+	struct sk_buff  *skb;
+	struct wlp_frame_assoc *resp;
+	struct wlp_uuid wssid;
+
+	wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid);
+	d_fnstart(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n",
+		  wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]);
+	mutex_lock(&wlp->mutex);
+	/* Send C1 association frame */
+	result = wlp_send_assoc_frame(wlp, wss, dev_addr, WLP_ASSOC_C1);
+	if (result < 0) {
+		dev_err(dev, "Unable to send C1 frame to neighbor "
+			"%02x:%02x (%d)\n", dev_addr->data[1],
+			dev_addr->data[0], result);
+		result = 0;
+		goto out;
+	}
+	/* Create session, wait for response */
+	session.exp_message = WLP_ASSOC_C2;
+	session.cb = wlp_session_cb;
+	session.cb_priv = &completion;
+	session.neighbor_addr = *dev_addr;
+	BUG_ON(wlp->session != NULL);
+	wlp->session = &session;
+	/* Wait for C2/F0 frame */
+	result = wait_for_completion_interruptible_timeout(&completion,
+						   WLP_PER_MSG_TIMEOUT * HZ);
+	if (result == 0) {
+		dev_err(dev, "Timeout while sending C1 to neighbor "
+			     "%02x:%02x.\n", dev_addr->data[1],
+			     dev_addr->data[0]);
+		goto out;
+	}
+	if (result < 0) {
+		dev_err(dev, "Unable to send C1 to neighbor %02x:%02x.\n",
+			dev_addr->data[1], dev_addr->data[0]);
+		result = 0;
+		goto out;
+	}
+	/* Parse message in session->data: it will be either C2 or F0 */
+	skb = session.data;
+	resp = (void *) skb->data;
+	d_printf(5, dev, "Received response to C1 frame. \n");
+	d_dump(5, dev, skb->data, skb->len > 72 ? 72 : skb->len);
+	if (resp->type == WLP_ASSOC_F0) {
+		result = wlp_parse_f0(wlp, skb);
+		if (result < 0)
+			dev_err(dev, "WLP:  unable to parse incoming F0 "
+				"frame from neighbor %02x:%02x.\n",
+				dev_addr->data[1], dev_addr->data[0]);
+		result = 0;
+		goto error_resp_parse;
+	}
+	/* WLP version and message type fields have already been parsed */
+	result = wlp_get_wssid(wlp, (void *)resp + sizeof(*resp), &wssid,
+			       skb->len - sizeof(*resp));
+	if (result < 0) {
+		dev_err(dev, "WLP: unable to obtain WSSID from C2 frame.\n");
+		result = 0;
+		goto error_resp_parse;
+	}
+	if (!memcmp(&wssid, &wss->wssid, sizeof(wssid))) {
+		d_printf(5, dev, "WSSID in C2 frame matches local "
+			 "active WSS.\n");
+		result = 1;
+	} else {
+		dev_err(dev, "WLP: Received a C2 frame without matching "
+			"WSSID.\n");
+		result = 0;
+	}
+error_resp_parse:
+	kfree_skb(skb);
+out:
+	wlp->session = NULL;
+	mutex_unlock(&wlp->mutex);
+	d_fnend(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n",
+		  wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]);
+	return result;
+}
+
+/**
+ * Activate connection with neighbor by updating EDA cache
+ *
+ * @wss:       local WSS to which neighbor wants to connect
+ * @dev_addr:  neighbor's address
+ * @wssid:     neighbor's WSSID - must be same as our WSS's WSSID
+ * @tag:       neighbor's WSS tag used to identify frames transmitted by it
+ * @virt_addr: neighbor's virtual EUI-48
+ */
+static
+int wlp_wss_activate_connection(struct wlp *wlp, struct wlp_wss *wss,
+				struct uwb_dev_addr *dev_addr,
+				struct wlp_uuid *wssid, u8 *tag,
+				struct uwb_mac_addr *virt_addr)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	int result = 0;
+	char buf[WLP_WSS_UUID_STRSIZE];
+	wlp_wss_uuid_print(buf, sizeof(buf), wssid);
+	d_fnstart(5, dev, "wlp %p, wss %p, wssid %s, tag %u, virtual "
+		  "%02x:%02x:%02x:%02x:%02x:%02x \n", wlp, wss, buf, *tag,
+		  virt_addr->data[0], virt_addr->data[1], virt_addr->data[2],
+		  virt_addr->data[3], virt_addr->data[4], virt_addr->data[5]);
+
+	if (!memcmp(wssid, &wss->wssid, sizeof(*wssid))) {
+		d_printf(5, dev, "WSSID from neighbor frame matches local "
+			 "active WSS.\n");
+		/* Update EDA cache */
+		result = wlp_eda_update_node(&wlp->eda, dev_addr, wss,
+					     (void *) virt_addr->data, *tag,
+					     WLP_WSS_CONNECTED);
+		if (result < 0)
+			dev_err(dev, "WLP: Unable to update EDA cache "
+				"with new connected neighbor information.\n");
+	} else {
+		dev_err(dev, "WLP: Neighbor does not have matching "
+			"WSSID.\n");
+		result = -EINVAL;
+	}
+
+	d_fnend(5, dev, "wlp %p, wss %p, wssid %s, tag %u, virtual "
+		  "%02x:%02x:%02x:%02x:%02x:%02x, result = %d \n",
+		  wlp, wss, buf, *tag,
+		  virt_addr->data[0], virt_addr->data[1], virt_addr->data[2],
+		  virt_addr->data[3], virt_addr->data[4], virt_addr->data[5],
+		  result);
+
+	return result;
+}
+
+/**
+ * Connect to WSS neighbor
+ *
+ * Use C3/C4 exchange to determine if neighbor has WSS activated and
+ * retrieve the WSS tag and virtual EUI-48 of the neighbor.
+ */
+static
+int wlp_wss_connect_neighbor(struct wlp *wlp, struct wlp_wss *wss,
+			     struct uwb_dev_addr *dev_addr)
+{
+	int result;
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	char buf[WLP_WSS_UUID_STRSIZE];
+	struct wlp_uuid wssid;
+	u8 tag;
+	struct uwb_mac_addr virt_addr;
+	DECLARE_COMPLETION_ONSTACK(completion);
+	struct wlp_session session;
+	struct wlp_frame_assoc *resp;
+	struct sk_buff *skb;
+
+	wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid);
+	d_fnstart(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n",
+		  wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]);
+	mutex_lock(&wlp->mutex);
+	/* Send C3 association frame */
+	result = wlp_send_assoc_frame(wlp, wss, dev_addr, WLP_ASSOC_C3);
+	if (result < 0) {
+		dev_err(dev, "Unable to send C3 frame to neighbor "
+			"%02x:%02x (%d)\n", dev_addr->data[1],
+			dev_addr->data[0], result);
+		goto out;
+	}
+	/* Create session, wait for response */
+	session.exp_message = WLP_ASSOC_C4;
+	session.cb = wlp_session_cb;
+	session.cb_priv = &completion;
+	session.neighbor_addr = *dev_addr;
+	BUG_ON(wlp->session != NULL);
+	wlp->session = &session;
+	/* Wait for C4/F0 frame */
+	result = wait_for_completion_interruptible_timeout(&completion,
+						   WLP_PER_MSG_TIMEOUT * HZ);
+	if (result == 0) {
+		dev_err(dev, "Timeout while sending C3 to neighbor "
+			     "%02x:%02x.\n", dev_addr->data[1],
+			     dev_addr->data[0]);
+		result = -ETIMEDOUT;
+		goto out;
+	}
+	if (result < 0) {
+		dev_err(dev, "Unable to send C3 to neighbor %02x:%02x.\n",
+			dev_addr->data[1], dev_addr->data[0]);
+		goto out;
+	}
+	/* Parse message in session->data: it will be either C4 or F0 */
+	skb = session.data;
+	resp = (void *) skb->data;
+	d_printf(5, dev, "Received response to C3 frame. \n");
+	d_dump(5, dev, skb->data, skb->len > 72 ? 72 : skb->len);
+	if (resp->type == WLP_ASSOC_F0) {
+		result = wlp_parse_f0(wlp, skb);
+		if (result < 0)
+			dev_err(dev, "WLP: unable to parse incoming F0 "
+				"frame from neighbor %02x:%02x.\n",
+				dev_addr->data[1], dev_addr->data[0]);
+		result = -EINVAL;
+		goto error_resp_parse;
+	}
+	result = wlp_parse_c3c4_frame(wlp, skb, &wssid, &tag, &virt_addr);
+	if (result < 0) {
+		dev_err(dev, "WLP: Unable to parse C4 frame from neighbor.\n");
+		goto error_resp_parse;
+	}
+	result = wlp_wss_activate_connection(wlp, wss, dev_addr, &wssid, &tag,
+					     &virt_addr);
+	if (result < 0) {
+		dev_err(dev, "WLP: Unable to activate connection to "
+			"neighbor %02x:%02x.\n", dev_addr->data[1],
+			dev_addr->data[0]);
+		goto error_resp_parse;
+	}
+error_resp_parse:
+	kfree_skb(skb);
+out:
+	/* Record that we unsuccessfully tried to connect to this neighbor */
+	if (result < 0)
+		wlp_eda_update_node_state(&wlp->eda, dev_addr,
+					  WLP_WSS_CONNECT_FAILED);
+	wlp->session = NULL;
+	mutex_unlock(&wlp->mutex);
+	d_fnend(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n",
+		  wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]);
+	return result;
+}
+
+/**
+ * Connect to neighbor with common WSS, send pending frame
+ *
+ * This function is scheduled when a frame is destined to a neighbor with
+ * which we do not have a connection. A copy of the EDA cache entry is
+ * provided - not the actual cache entry (because it is protected by a
+ * spinlock).
+ *
+ * First determine if neighbor has the same WSS activated, connect if it
+ * does. The C3/C4 exchange is dual purpose to determine if neighbor has
+ * WSS activated and proceed with the connection.
+ *
+ * The frame that triggered the connection setup is sent after connection
+ * setup.
+ *
+ * network queue is stopped - we need to restart when done
+ *
+ */
+static
+void wlp_wss_connect_send(struct work_struct *ws)
+{
+	struct wlp_assoc_conn_ctx *conn_ctx = container_of(ws,
+						  struct wlp_assoc_conn_ctx,
+						  ws);
+	struct wlp *wlp = conn_ctx->wlp;
+	struct sk_buff *skb = conn_ctx->skb;
+	struct wlp_eda_node *eda_entry = &conn_ctx->eda_entry;
+	struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr;
+	struct wlp_wss *wss = &wlp->wss;
+	int result;
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	char buf[WLP_WSS_UUID_STRSIZE];
+
+	mutex_lock(&wss->mutex);
+	wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid);
+	d_fnstart(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n",
+		  wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]);
+	if (wss->state < WLP_WSS_STATE_ACTIVE) {
+		if (printk_ratelimit())
+			dev_err(dev, "WLP: Attempting to connect with "
+				"WSS that is not active or connected.\n");
+		dev_kfree_skb(skb);
+		goto out;
+	}
+	/* Establish connection - send C3 rcv C4 */
+	result = wlp_wss_connect_neighbor(wlp, wss, dev_addr);
+	if (result < 0) {
+		if (printk_ratelimit())
+			dev_err(dev, "WLP: Unable to establish connection "
+				"with neighbor %02x:%02x.\n",
+				dev_addr->data[1], dev_addr->data[0]);
+		dev_kfree_skb(skb);
+		goto out;
+	}
+	/* EDA entry changed, update the local copy being used */
+	result = wlp_copy_eda_node(&wlp->eda, dev_addr, eda_entry);
+	if (result < 0) {
+		if (printk_ratelimit())
+			dev_err(dev, "WLP: Cannot find EDA entry for "
+				"neighbor %02x:%02x \n",
+				dev_addr->data[1], dev_addr->data[0]);
+	}
+	result = wlp_wss_prep_hdr(wlp, eda_entry, skb);
+	if (result < 0) {
+		if (printk_ratelimit())
+			dev_err(dev, "WLP: Unable to prepare frame header for "
+				"transmission (neighbor %02x:%02x). \n",
+				dev_addr->data[1], dev_addr->data[0]);
+		dev_kfree_skb(skb);
+		goto out;
+	}
+	BUG_ON(wlp->xmit_frame == NULL);
+	result = wlp->xmit_frame(wlp, skb, dev_addr);
+	if (result < 0) {
+		if (printk_ratelimit())
+			dev_err(dev, "WLP: Unable to transmit frame: %d\n",
+				result);
+		if (result == -ENXIO)
+			dev_err(dev, "WLP: Is network interface up? \n");
+		/* We could try again ... */
+		dev_kfree_skb(skb);/*we need to free if tx fails */
+	}
+out:
+	kfree(conn_ctx);
+	BUG_ON(wlp->start_queue == NULL);
+	wlp->start_queue(wlp);
+	mutex_unlock(&wss->mutex);
+	d_fnend(5, dev, "wlp %p, wss %p (wssid %s)\n", wlp, wss, buf);
+}
+
+/**
+ * Add WLP header to outgoing skb
+ *
+ * @eda_entry: pointer to neighbor's entry in the EDA cache
+ * @_skb:      skb containing data destined to the neighbor
+ */
+int wlp_wss_prep_hdr(struct wlp *wlp, struct wlp_eda_node *eda_entry,
+		     void *_skb)
+{
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	int result = 0;
+	unsigned char *eth_addr = eda_entry->eth_addr;
+	struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr;
+	struct sk_buff *skb = _skb;
+	struct wlp_frame_std_abbrv_hdr *std_hdr;
+
+	d_fnstart(6, dev, "wlp %p \n", wlp);
+	if (eda_entry->state == WLP_WSS_CONNECTED) {
+		/* Add WLP header */
+		BUG_ON(skb_headroom(skb) < sizeof(*std_hdr));
+		std_hdr = (void *) __skb_push(skb, sizeof(*std_hdr));
+		std_hdr->hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID);
+		std_hdr->hdr.type = WLP_FRAME_STANDARD;
+		std_hdr->tag = eda_entry->wss->tag;
+	} else {
+		if (printk_ratelimit())
+			dev_err(dev, "WLP: Destination neighbor (Ethernet: "
+				"%02x:%02x:%02x:%02x:%02x:%02x, Dev: "
+				"%02x:%02x) is not connected. \n", eth_addr[0],
+				eth_addr[1], eth_addr[2], eth_addr[3],
+				eth_addr[4], eth_addr[5], dev_addr->data[1],
+				dev_addr->data[0]);
+		result = -EINVAL;
+	}
+	d_fnend(6, dev, "wlp %p \n", wlp);
+	return result;
+}
+
+
+/**
+ * Prepare skb for neighbor: connect if not already and prep WLP header
+ *
+ * This function is called in interrupt context, but it needs to sleep. We
+ * temporarily stop the net queue to establish the WLP connection.
+ * Setup of the WLP connection and restart of queue is scheduled
+ * on the default work queue.
+ *
+ * run with eda->lock held (spinlock)
+ */
+int wlp_wss_connect_prep(struct wlp *wlp, struct wlp_eda_node *eda_entry,
+			 void *_skb)
+{
+	int result = 0;
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr;
+	unsigned char *eth_addr = eda_entry->eth_addr;
+	struct sk_buff *skb = _skb;
+	struct wlp_assoc_conn_ctx *conn_ctx;
+
+	d_fnstart(5, dev, "wlp %p\n", wlp);
+	d_printf(5, dev, "To neighbor %02x:%02x with eth "
+		  "%02x:%02x:%02x:%02x:%02x:%02x\n", dev_addr->data[1],
+		  dev_addr->data[0], eth_addr[0], eth_addr[1], eth_addr[2],
+		  eth_addr[3], eth_addr[4], eth_addr[5]);
+	if (eda_entry->state == WLP_WSS_UNCONNECTED) {
+		/* We don't want any more packets while we set up connection */
+		BUG_ON(wlp->stop_queue == NULL);
+		wlp->stop_queue(wlp);
+		conn_ctx = kmalloc(sizeof(*conn_ctx), GFP_ATOMIC);
+		if (conn_ctx == NULL) {
+			if (printk_ratelimit())
+				dev_err(dev, "WLP: Unable to allocate memory "
+					"for connection handling.\n");
+			result = -ENOMEM;
+			goto out;
+		}
+		conn_ctx->wlp = wlp;
+		conn_ctx->skb = skb;
+		conn_ctx->eda_entry = *eda_entry;
+		INIT_WORK(&conn_ctx->ws, wlp_wss_connect_send);
+		schedule_work(&conn_ctx->ws);
+		result = 1;
+	} else if (eda_entry->state == WLP_WSS_CONNECT_FAILED) {
+		/* Previous connection attempts failed, don't retry - see
+		 * conditions for connection in WLP 0.99 [7.6.2] */
+		if (printk_ratelimit())
+			dev_err(dev, "Could not connect to neighbor "
+			 "previously. Not retrying. \n");
+		result = -ENONET;
+		goto out;
+	} else { /* eda_entry->state == WLP_WSS_CONNECTED */
+		d_printf(5, dev, "Neighbor is connected, preparing frame.\n");
+		result = wlp_wss_prep_hdr(wlp, eda_entry, skb);
+	}
+out:
+	d_fnend(5, dev, "wlp %p, result = %d \n", wlp, result);
+	return result;
+}
+
+/**
+ * Emulate broadcast: copy skb, send copy to neighbor (connect if not already)
+ *
+ * We need to copy skbs in the case where we emulate broadcast through
+ * unicast. We copy instead of clone because we are modifying the data of
+ * the frame after copying ... clones share data so we cannot emulate
+ * broadcast using clones.
+ *
+ * run with eda->lock held (spinlock)
+ */
+int wlp_wss_send_copy(struct wlp *wlp, struct wlp_eda_node *eda_entry,
+		      void *_skb)
+{
+	int result = -ENOMEM;
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	struct sk_buff *skb = _skb;
+	struct sk_buff *copy;
+	struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr;
+
+	d_fnstart(5, dev, "to neighbor %02x:%02x, skb (%p) \n",
+		  dev_addr->data[1], dev_addr->data[0], skb);
+	copy = skb_copy(skb, GFP_ATOMIC);
+	if (copy == NULL) {
+		if (printk_ratelimit())
+			dev_err(dev, "WLP: Unable to copy skb for "
+				"transmission.\n");
+		goto out;
+	}
+	result = wlp_wss_connect_prep(wlp, eda_entry, copy);
+	if (result < 0) {
+		if (printk_ratelimit())
+			dev_err(dev, "WLP: Unable to connect/send skb "
+				"to neighbor.\n");
+		dev_kfree_skb_irq(copy);
+		goto out;
+	} else if (result == 1)
+		/* Frame will be transmitted separately */
+		goto out;
+	BUG_ON(wlp->xmit_frame == NULL);
+	result = wlp->xmit_frame(wlp, copy, dev_addr);
+	if (result < 0) {
+		if (printk_ratelimit())
+			dev_err(dev, "WLP: Unable to transmit frame: %d\n",
+				result);
+		if ((result == -ENXIO) && printk_ratelimit())
+			dev_err(dev, "WLP: Is network interface up? \n");
+		/* We could try again ... */
+		dev_kfree_skb_irq(copy);/*we need to free if tx fails */
+	}
+out:
+	d_fnend(5, dev, "to neighbor %02x:%02x \n", dev_addr->data[1],
+		  dev_addr->data[0]);
+	return result;
+}
+
+
+/**
+ * Setup WSS
+ *
+ * Should be called by network driver after the interface has been given a
+ * MAC address.
+ */
+int wlp_wss_setup(struct net_device *net_dev, struct wlp_wss *wss)
+{
+	struct wlp *wlp = container_of(wss, struct wlp, wss);
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	int result = 0;
+	d_fnstart(5, dev, "wss (%p) \n", wss);
+	mutex_lock(&wss->mutex);
+	wss->kobj.parent = &net_dev->dev.kobj;
+	if (!is_valid_ether_addr(net_dev->dev_addr)) {
+		dev_err(dev, "WLP: Invalid MAC address. Cannot use for"
+		       "virtual.\n");
+		result = -EINVAL;
+		goto out;
+	}
+	memcpy(wss->virtual_addr.data, net_dev->dev_addr,
+	       sizeof(wss->virtual_addr.data));
+out:
+	mutex_unlock(&wss->mutex);
+	d_fnend(5, dev, "wss (%p) \n", wss);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wlp_wss_setup);
+
+/**
+ * Remove WSS
+ *
+ * Called by client that configured WSS through wlp_wss_setup(). This
+ * function is called when client no longer needs WSS, eg. client shuts
+ * down.
+ *
+ * We remove the WLP IE from the beacon before initiating local cleanup.
+ */
+void wlp_wss_remove(struct wlp_wss *wss)
+{
+	struct wlp *wlp = container_of(wss, struct wlp, wss);
+	struct device *dev = &wlp->rc->uwb_dev.dev;
+	d_fnstart(5, dev, "wss (%p) \n", wss);
+	mutex_lock(&wss->mutex);
+	if (wss->state == WLP_WSS_STATE_ACTIVE)
+		uwb_rc_ie_rm(wlp->rc, UWB_IE_WLP);
+	if (wss->state != WLP_WSS_STATE_NONE) {
+		sysfs_remove_group(&wss->kobj, &wss_attr_group);
+		kobject_put(&wss->kobj);
+	}
+	wss->kobj.parent = NULL;
+	memset(&wss->virtual_addr, 0, sizeof(wss->virtual_addr));
+	/* Cleanup EDA cache */
+	wlp_eda_release(&wlp->eda);
+	wlp_eda_init(&wlp->eda);
+	mutex_unlock(&wss->mutex);
+	d_fnend(5, dev, "wss (%p) \n", wss);
+}
+EXPORT_SYMBOL_GPL(wlp_wss_remove);
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index c72a135..4a4dd9a 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -75,6 +75,15 @@
 	  This driver provides a platform-device registered LCD power
 	  control interface.
 
+config LCD_TOSA
+	tristate "Sharp SL-6000 LCD Driver"
+	depends on LCD_CLASS_DEVICE && SPI
+	depends on MACH_TOSA
+	default n
+	help
+	  If you have an Sharp SL-6000 Zaurus say Y to enable a driver
+	  for its LCD.
+
 #
 # Backlight
 #
@@ -115,7 +124,7 @@
 	  called atmel-pwm-bl.
 
 config BACKLIGHT_CORGI
-	tristate "Generic (aka Sharp Corgi) Backlight Driver"
+	tristate "Generic (aka Sharp Corgi) Backlight Driver (DEPRECATED)"
 	depends on BACKLIGHT_CLASS_DEVICE
 	default n
 	help
@@ -123,6 +132,9 @@
 	  known as the Corgi backlight driver. If you have a Sharp Zaurus
 	  SL-C7xx, SL-Cxx00 or SL-6000x say y. Most users can say n.
 
+	  Note: this driver is marked as deprecated, try enable SPI and
+	  use the new corgi_lcd driver with integrated backlight control
+
 config BACKLIGHT_LOCOMO
 	tristate "Sharp LOCOMO LCD/Backlight Driver"
 	depends on BACKLIGHT_CLASS_DEVICE && SHARP_LOCOMO
@@ -171,6 +183,13 @@
 	  If you have a LCD backlight adjustable by PWM, say Y to enable
 	  this driver.
 
+config BACKLIGHT_DA903X
+	tristate "Backlight Driver for DA9030/DA9034 using WLED"
+	depends on BACKLIGHT_CLASS_DEVICE && PMIC_DA903X
+	help
+	  If you have a LCD backlight connected to the WLED output of DA9030
+	  or DA9034 WLED output, say Y here to enable this driver.
+
 config BACKLIGHT_MBP_NVIDIA
        tristate "MacBook Pro Nvidia Backlight Driver"
        depends on BACKLIGHT_CLASS_DEVICE && X86
@@ -179,3 +198,19 @@
          If you have an Apple Macbook Pro with Nvidia graphics hardware say Y
 	 to enable a driver for its backlight
 
+config BACKLIGHT_TOSA
+	tristate "Sharp SL-6000 Backlight Driver"
+	depends on BACKLIGHT_CLASS_DEVICE && I2C
+	depends on MACH_TOSA && LCD_TOSA
+	default n
+	help
+	  If you have an Sharp SL-6000 Zaurus say Y to enable a driver
+	  for its backlight
+
+config BACKLIGHT_SAHARA
+	tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
+	depends on BACKLIGHT_CLASS_DEVICE && X86
+	default n
+	help
+	  If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
+	  backlight driver.
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 3ec551e..103427d 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -7,6 +7,7 @@
 obj-$(CONFIG_LCD_PLATFORM)	   += platform_lcd.o
 obj-$(CONFIG_LCD_VGG2432A4)	   += vgg2432a4.o
 obj-$(CONFIG_LCD_TDO24M)	   += tdo24m.o
+obj-$(CONFIG_LCD_TOSA)		   += tosa_lcd.o
 
 obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
 obj-$(CONFIG_BACKLIGHT_ATMEL_PWM)    += atmel-pwm-bl.o
@@ -17,5 +18,8 @@
 obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
 obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
 obj-$(CONFIG_BACKLIGHT_PWM)	+= pwm_bl.o
+obj-$(CONFIG_BACKLIGHT_DA903X)	+= da903x.o
 obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
+obj-$(CONFIG_BACKLIGHT_TOSA)	+= tosa_bl.o
+obj-$(CONFIG_BACKLIGHT_SAHARA)	+= kb3886_bl.o
 
diff --git a/drivers/video/backlight/da903x.c b/drivers/video/backlight/da903x.c
new file mode 100644
index 0000000..242c382
--- /dev/null
+++ b/drivers/video/backlight/da903x.c
@@ -0,0 +1,201 @@
+/*
+ * Backlight driver for Dialog Semiconductor DA9030/DA9034
+ *
+ * Copyright (C) 2008 Compulab, Ltd.
+ * 	Mike Rapoport <mike@compulab.co.il>
+ *
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ * 	Eric Miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/mfd/da903x.h>
+
+#define DA9030_WLED_CONTROL	0x25
+#define DA9030_WLED_CP_EN	(1 << 6)
+#define DA9030_WLED_TRIM(x)	((x) & 0x7)
+
+#define DA9034_WLED_CONTROL1	0x3C
+#define DA9034_WLED_CONTROL2	0x3D
+
+#define DA9034_WLED_BOOST_EN	(1 << 5)
+
+#define DA9030_MAX_BRIGHTNESS	7
+#define DA9034_MAX_BRIGHTNESS	0x7f
+
+struct da903x_backlight_data {
+	struct device *da903x_dev;
+	int id;
+	int current_brightness;
+};
+
+static int da903x_backlight_set(struct backlight_device *bl, int brightness)
+{
+	struct da903x_backlight_data *data = bl_get_data(bl);
+	struct device *dev = data->da903x_dev;
+	uint8_t val;
+	int ret = 0;
+
+	switch (data->id) {
+	case DA9034_ID_WLED:
+		ret = da903x_update(dev, DA9034_WLED_CONTROL1,
+				brightness, 0x7f);
+		if (ret)
+			return ret;
+
+		if (data->current_brightness && brightness == 0)
+			ret = da903x_clr_bits(dev,
+					DA9034_WLED_CONTROL2,
+					DA9034_WLED_BOOST_EN);
+
+		if (data->current_brightness == 0 && brightness)
+			ret = da903x_set_bits(dev,
+					DA9034_WLED_CONTROL2,
+					DA9034_WLED_BOOST_EN);
+		break;
+	case DA9030_ID_WLED:
+		val = DA9030_WLED_TRIM(brightness);
+		val |= brightness ? DA9030_WLED_CP_EN : 0;
+		ret = da903x_write(dev, DA9030_WLED_CONTROL, val);
+		break;
+	}
+
+	if (ret)
+		return ret;
+
+	data->current_brightness = brightness;
+	return 0;
+}
+
+static int da903x_backlight_update_status(struct backlight_device *bl)
+{
+	int brightness = bl->props.brightness;
+
+	if (bl->props.power != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	return da903x_backlight_set(bl, brightness);
+}
+
+static int da903x_backlight_get_brightness(struct backlight_device *bl)
+{
+	struct da903x_backlight_data *data = bl_get_data(bl);
+	return data->current_brightness;
+}
+
+static struct backlight_ops da903x_backlight_ops = {
+	.update_status	= da903x_backlight_update_status,
+	.get_brightness	= da903x_backlight_get_brightness,
+};
+
+static int da903x_backlight_probe(struct platform_device *pdev)
+{
+	struct da903x_backlight_data *data;
+	struct backlight_device *bl;
+	int max_brightness;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
+	switch (pdev->id) {
+	case DA9030_ID_WLED:
+		max_brightness = DA9030_MAX_BRIGHTNESS;
+		break;
+	case DA9034_ID_WLED:
+		max_brightness = DA9034_MAX_BRIGHTNESS;
+		break;
+	default:
+		dev_err(&pdev->dev, "invalid backlight device ID(%d)\n",
+				pdev->id);
+		return -EINVAL;
+	}
+
+	data->id = pdev->id;
+	data->da903x_dev = pdev->dev.parent;
+	data->current_brightness = 0;
+
+	bl = backlight_device_register(pdev->name, data->da903x_dev,
+			data, &da903x_backlight_ops);
+	if (IS_ERR(bl)) {
+		dev_err(&pdev->dev, "failed to register backlight\n");
+		return PTR_ERR(bl);
+	}
+
+	bl->props.max_brightness = max_brightness;
+	bl->props.brightness = max_brightness;
+
+	platform_set_drvdata(pdev, bl);
+	backlight_update_status(bl);
+	return 0;
+}
+
+static int da903x_backlight_remove(struct platform_device *pdev)
+{
+	struct backlight_device *bl = platform_get_drvdata(pdev);
+	struct da903x_backlight_data *data = bl_get_data(bl);
+
+	backlight_device_unregister(bl);
+	kfree(data);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int da903x_backlight_suspend(struct platform_device *pdev,
+				 pm_message_t state)
+{
+	struct backlight_device *bl = platform_get_drvdata(pdev);
+	return da903x_backlight_set(bl, 0);
+}
+
+static int da903x_backlight_resume(struct platform_device *pdev)
+{
+	struct backlight_device *bl = platform_get_drvdata(pdev);
+
+	backlight_update_status(bl);
+	return 0;
+}
+#else
+#define da903x_backlight_suspend	NULL
+#define da903x_backlight_resume		NULL
+#endif
+
+static struct platform_driver da903x_backlight_driver = {
+	.driver		= {
+		.name	= "da903x-backlight",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= da903x_backlight_probe,
+	.remove		= da903x_backlight_remove,
+	.suspend	= da903x_backlight_suspend,
+	.resume		= da903x_backlight_resume,
+};
+
+static int __init da903x_backlight_init(void)
+{
+	return platform_driver_register(&da903x_backlight_driver);
+}
+module_init(da903x_backlight_init);
+
+static void __exit da903x_backlight_exit(void)
+{
+	platform_driver_unregister(&da903x_backlight_driver);
+}
+module_exit(da903x_backlight_exit);
+
+MODULE_DESCRIPTION("Backlight Driver for Dialog Semiconductor DA9030/DA9034");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"
+	      "Mike Rapoport <mike@compulab.co.il>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da903x-backlight");
diff --git a/drivers/video/backlight/kb3886_bl.c b/drivers/video/backlight/kb3886_bl.c
new file mode 100644
index 0000000..a38fda1
--- /dev/null
+++ b/drivers/video/backlight/kb3886_bl.c
@@ -0,0 +1,204 @@
+/*
+ *  Backlight Driver for the KB3886 Backlight
+ *
+ *  Copyright (c) 2007-2008 Claudio Nieder
+ *
+ *  Based on corgi_bl.c by Richard Purdie and kb3886 driver by Robert Woerle
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
+
+#define KB3886_PARENT 0x64
+#define KB3886_IO 0x60
+#define KB3886_ADC_DAC_PWM 0xC4
+#define KB3886_PWM0_WRITE 0x81
+#define KB3886_PWM0_READ 0x41
+
+static DEFINE_MUTEX(bl_mutex);
+
+static void kb3886_bl_set_intensity(int intensity)
+{
+	mutex_lock(&bl_mutex);
+	intensity = intensity&0xff;
+	outb(KB3886_ADC_DAC_PWM, KB3886_PARENT);
+	msleep(10);
+	outb(KB3886_PWM0_WRITE, KB3886_IO);
+	msleep(10);
+	outb(intensity, KB3886_IO);
+	mutex_unlock(&bl_mutex);
+}
+
+struct kb3886bl_machinfo {
+	int max_intensity;
+	int default_intensity;
+	int limit_mask;
+	void (*set_bl_intensity)(int intensity);
+};
+
+static struct kb3886bl_machinfo kb3886_bl_machinfo = {
+	.max_intensity = 0xff,
+	.default_intensity = 0xa0,
+	.limit_mask = 0x7f,
+	.set_bl_intensity = kb3886_bl_set_intensity,
+};
+
+static struct platform_device kb3886bl_device = {
+	.name		= "kb3886-bl",
+	.dev		= {
+		.platform_data	= &kb3886_bl_machinfo,
+	},
+	.id		= -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&kb3886bl_device,
+};
+
+/*
+ * Back to driver
+ */
+
+static int kb3886bl_intensity;
+static struct backlight_device *kb3886_backlight_device;
+static struct kb3886bl_machinfo *bl_machinfo;
+
+static unsigned long kb3886bl_flags;
+#define KB3886BL_SUSPENDED     0x01
+
+static struct dmi_system_id __initdata kb3886bl_device_table[] = {
+	{
+		.ident = "Sahara Touch-iT",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SDV"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "iTouch T201"),
+		},
+	},
+	{ }
+};
+
+static int kb3886bl_send_intensity(struct backlight_device *bd)
+{
+	int intensity = bd->props.brightness;
+
+	if (bd->props.power != FB_BLANK_UNBLANK)
+		intensity = 0;
+	if (bd->props.fb_blank != FB_BLANK_UNBLANK)
+		intensity = 0;
+	if (kb3886bl_flags & KB3886BL_SUSPENDED)
+		intensity = 0;
+
+	bl_machinfo->set_bl_intensity(intensity);
+
+	kb3886bl_intensity = intensity;
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int kb3886bl_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct backlight_device *bd = platform_get_drvdata(pdev);
+
+	kb3886bl_flags |= KB3886BL_SUSPENDED;
+	backlight_update_status(bd);
+	return 0;
+}
+
+static int kb3886bl_resume(struct platform_device *pdev)
+{
+	struct backlight_device *bd = platform_get_drvdata(pdev);
+
+	kb3886bl_flags &= ~KB3886BL_SUSPENDED;
+	backlight_update_status(bd);
+	return 0;
+}
+#else
+#define kb3886bl_suspend	NULL
+#define kb3886bl_resume		NULL
+#endif
+
+static int kb3886bl_get_intensity(struct backlight_device *bd)
+{
+	return kb3886bl_intensity;
+}
+
+static struct backlight_ops kb3886bl_ops = {
+	.get_brightness = kb3886bl_get_intensity,
+	.update_status  = kb3886bl_send_intensity,
+};
+
+static int kb3886bl_probe(struct platform_device *pdev)
+{
+	struct kb3886bl_machinfo *machinfo = pdev->dev.platform_data;
+
+	bl_machinfo = machinfo;
+	if (!machinfo->limit_mask)
+		machinfo->limit_mask = -1;
+
+	kb3886_backlight_device = backlight_device_register("kb3886-bl",
+		&pdev->dev, NULL, &kb3886bl_ops);
+	if (IS_ERR(kb3886_backlight_device))
+		return PTR_ERR(kb3886_backlight_device);
+
+	platform_set_drvdata(pdev, kb3886_backlight_device);
+
+	kb3886_backlight_device->props.max_brightness = machinfo->max_intensity;
+	kb3886_backlight_device->props.power = FB_BLANK_UNBLANK;
+	kb3886_backlight_device->props.brightness = machinfo->default_intensity;
+	backlight_update_status(kb3886_backlight_device);
+
+	return 0;
+}
+
+static int kb3886bl_remove(struct platform_device *pdev)
+{
+	struct backlight_device *bd = platform_get_drvdata(pdev);
+
+	backlight_device_unregister(bd);
+
+	return 0;
+}
+
+static struct platform_driver kb3886bl_driver = {
+	.probe		= kb3886bl_probe,
+	.remove		= kb3886bl_remove,
+	.suspend	= kb3886bl_suspend,
+	.resume		= kb3886bl_resume,
+	.driver		= {
+		.name	= "kb3886-bl",
+	},
+};
+
+static int __init kb3886_init(void)
+{
+	if (!dmi_check_system(kb3886bl_device_table))
+		return -ENODEV;
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	return platform_driver_register(&kb3886bl_driver);
+}
+
+static void __exit kb3886_exit(void)
+{
+	platform_driver_unregister(&kb3886bl_driver);
+}
+
+module_init(kb3886_init);
+module_exit(kb3886_exit);
+
+MODULE_AUTHOR("Claudio Nieder <private@claudio.ch>");
+MODULE_DESCRIPTION("Tabletkiosk Sahara Touch-iT Backlight Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("dmi:*:svnSDV:pniTouchT201:*");
diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c
new file mode 100644
index 0000000..43edbad
--- /dev/null
+++ b/drivers/video/backlight/tosa_bl.c
@@ -0,0 +1,198 @@
+/*
+ *  LCD / Backlight control code for Sharp SL-6000x (tosa)
+ *
+ *  Copyright (c) 2005		Dirk Opfer
+ *  Copyright (c) 2007,2008	Dmitry Baryshkov
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+
+#include <asm/mach/sharpsl_param.h>
+
+#include <mach/tosa.h>
+
+#define COMADJ_DEFAULT	97
+
+#define DAC_CH1		0
+#define DAC_CH2		1
+
+struct tosa_bl_data {
+	struct i2c_client *i2c;
+	struct backlight_device *bl;
+
+	int comadj;
+};
+
+static void tosa_bl_set_backlight(struct tosa_bl_data *data, int brightness)
+{
+	struct spi_device *spi = data->i2c->dev.platform_data;
+
+	i2c_smbus_write_byte_data(data->i2c, DAC_CH1, data->comadj);
+
+	/* SetBacklightDuty */
+	i2c_smbus_write_byte_data(data->i2c, DAC_CH2, (u8)(brightness & 0xff));
+
+	/* SetBacklightVR */
+	gpio_set_value(TOSA_GPIO_BL_C20MA, brightness & 0x100);
+
+	tosa_bl_enable(spi, brightness);
+}
+
+static int tosa_bl_update_status(struct backlight_device *dev)
+{
+	struct backlight_properties *props = &dev->props;
+	struct tosa_bl_data *data = dev_get_drvdata(&dev->dev);
+	int power = max(props->power, props->fb_blank);
+	int brightness = props->brightness;
+
+	if (power)
+		brightness = 0;
+
+	tosa_bl_set_backlight(data, brightness);
+
+	return 0;
+}
+
+static int tosa_bl_get_brightness(struct backlight_device *dev)
+{
+	struct backlight_properties *props = &dev->props;
+
+	return props->brightness;
+}
+
+static struct backlight_ops bl_ops = {
+	.get_brightness		= tosa_bl_get_brightness,
+	.update_status		= tosa_bl_update_status,
+};
+
+static int __devinit tosa_bl_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct tosa_bl_data *data = kzalloc(sizeof(struct tosa_bl_data), GFP_KERNEL);
+	int ret = 0;
+	if (!data)
+		return -ENOMEM;
+
+	data->comadj = sharpsl_param.comadj == -1 ? COMADJ_DEFAULT : sharpsl_param.comadj;
+
+	ret = gpio_request(TOSA_GPIO_BL_C20MA, "backlight");
+	if (ret) {
+		dev_dbg(&data->bl->dev, "Unable to request gpio!\n");
+		goto err_gpio_bl;
+	}
+	ret = gpio_direction_output(TOSA_GPIO_BL_C20MA, 0);
+	if (ret)
+		goto err_gpio_dir;
+
+	i2c_set_clientdata(client, data);
+	data->i2c = client;
+
+	data->bl = backlight_device_register("tosa-bl", &client->dev,
+			data, &bl_ops);
+	if (IS_ERR(data->bl)) {
+		ret = PTR_ERR(data->bl);
+		goto err_reg;
+	}
+
+	data->bl->props.brightness = 69;
+	data->bl->props.max_brightness = 512 - 1;
+	data->bl->props.power = FB_BLANK_UNBLANK;
+
+	backlight_update_status(data->bl);
+
+	return 0;
+
+err_reg:
+	data->bl = NULL;
+	i2c_set_clientdata(client, NULL);
+err_gpio_dir:
+	gpio_free(TOSA_GPIO_BL_C20MA);
+err_gpio_bl:
+	kfree(data);
+	return ret;
+}
+
+static int __devexit tosa_bl_remove(struct i2c_client *client)
+{
+	struct tosa_bl_data *data = i2c_get_clientdata(client);
+
+	backlight_device_unregister(data->bl);
+	data->bl = NULL;
+	i2c_set_clientdata(client, NULL);
+
+	gpio_free(TOSA_GPIO_BL_C20MA);
+
+	kfree(data);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int tosa_bl_suspend(struct i2c_client *client, pm_message_t pm)
+{
+	struct tosa_bl_data *data = i2c_get_clientdata(client);
+
+	tosa_bl_set_backlight(data, 0);
+
+	return 0;
+}
+
+static int tosa_bl_resume(struct i2c_client *client)
+{
+	struct tosa_bl_data *data = i2c_get_clientdata(client);
+
+	backlight_update_status(data->bl);
+	return 0;
+}
+#else
+#define tosa_bl_suspend NULL
+#define tosa_bl_resume NULL
+#endif
+
+static const struct i2c_device_id tosa_bl_id[] = {
+	{ "tosa-bl", 0 },
+	{ },
+};
+
+
+static struct i2c_driver tosa_bl_driver = {
+	.driver = {
+		.name		= "tosa-bl",
+		.owner		= THIS_MODULE,
+	},
+	.probe		= tosa_bl_probe,
+	.remove		= __devexit_p(tosa_bl_remove),
+	.suspend	= tosa_bl_suspend,
+	.resume		= tosa_bl_resume,
+	.id_table	= tosa_bl_id,
+};
+
+static int __init tosa_bl_init(void)
+{
+	return i2c_add_driver(&tosa_bl_driver);
+}
+
+static void __exit tosa_bl_exit(void)
+{
+	i2c_del_driver(&tosa_bl_driver);
+}
+
+module_init(tosa_bl_init);
+module_exit(tosa_bl_exit);
+
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("LCD/Backlight control for Sharp SL-6000 PDA");
+
diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c
new file mode 100644
index 0000000..57a2664
--- /dev/null
+++ b/drivers/video/backlight/tosa_lcd.c
@@ -0,0 +1,280 @@
+/*
+ *  LCD / Backlight control code for Sharp SL-6000x (tosa)
+ *
+ *  Copyright (c) 2005		Dirk Opfer
+ *  Copyright (c) 2007,2008	Dmitry Baryshkov
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/lcd.h>
+#include <linux/fb.h>
+
+#include <asm/mach/sharpsl_param.h>
+
+#include <mach/tosa.h>
+
+#define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
+
+#define TG_REG0_VQV	0x0001
+#define TG_REG0_COLOR	0x0002
+#define TG_REG0_UD	0x0004
+#define TG_REG0_LR	0x0008
+
+#define	DAC_BASE	0x4e
+
+struct tosa_lcd_data {
+	struct spi_device *spi;
+	struct lcd_device *lcd;
+	struct i2c_client *i2c;
+
+	int lcd_power;
+};
+
+static int tosa_tg_send(struct spi_device *spi, int adrs, uint8_t data)
+{
+	u8 buf[1];
+	struct spi_message msg;
+	struct spi_transfer xfer = {
+		.len		= 1,
+		.cs_change	= 1,
+		.tx_buf		= buf,
+	};
+
+	buf[0] = ((adrs & 0x07) << 5) | (data & 0x1f);
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	return spi_sync(spi, &msg);
+}
+
+int tosa_bl_enable(struct spi_device *spi, int enable)
+{
+	/* bl_enable GP04=1 otherwise GP04=0*/
+	return tosa_tg_send(spi, TG_GPODR2, enable? 0x01 : 0x00);
+}
+EXPORT_SYMBOL(tosa_bl_enable);
+
+static void tosa_lcd_tg_init(struct tosa_lcd_data *data)
+{
+	/* TG on */
+	gpio_set_value(TOSA_GPIO_TG_ON, 0);
+
+	mdelay(60);
+
+	/* delayed 0clk TCTL signal for VGA */
+	tosa_tg_send(data->spi, TG_TPOSCTL, 0x00);
+	/* GPOS0=powercontrol, GPOS1=GPIO, GPOS2=TCTL */
+	tosa_tg_send(data->spi, TG_GPOSR, 0x02);
+}
+
+static void tosa_lcd_tg_on(struct tosa_lcd_data *data)
+{
+	struct spi_device *spi = data->spi;
+	const int value = TG_REG0_COLOR | TG_REG0_UD | TG_REG0_LR;
+	tosa_tg_send(spi, TG_PNLCTL, value | TG_REG0_VQV); /* this depends on mode */
+
+	/* TG LCD pannel power up */
+	tosa_tg_send(spi, TG_PINICTL,0x4);
+	mdelay(50);
+
+	/* TG LCD GVSS */
+	tosa_tg_send(spi, TG_PINICTL,0x0);
+
+	if (!data->i2c) {
+		/* after the pannel is powered up the first time, we can access the i2c bus */
+		/* so probe for the DAC */
+		struct i2c_adapter *adap = i2c_get_adapter(0);
+		struct i2c_board_info info = {
+			.type	= "tosa-bl",
+			.addr	= DAC_BASE,
+			.platform_data = data->spi,
+		};
+		data->i2c = i2c_new_device(adap, &info);
+	}
+}
+
+static void tosa_lcd_tg_off(struct tosa_lcd_data *data)
+{
+	struct spi_device *spi = data->spi;
+
+	/* TG LCD VHSA off */
+	tosa_tg_send(spi, TG_PINICTL,0x4);
+	mdelay(50);
+
+	/* TG LCD signal off */
+	tosa_tg_send(spi, TG_PINICTL,0x6);
+	mdelay(50);
+
+	/* TG Off */
+	gpio_set_value(TOSA_GPIO_TG_ON, 1);
+	mdelay(100);
+}
+
+int tosa_lcd_set_power(struct lcd_device *lcd, int power)
+{
+	struct tosa_lcd_data *data = lcd_get_data(lcd);
+
+	if (POWER_IS_ON(power) && !POWER_IS_ON(data->lcd_power))
+		tosa_lcd_tg_on(data);
+
+	if (!POWER_IS_ON(power) && POWER_IS_ON(data->lcd_power))
+		tosa_lcd_tg_off(data);
+
+	data->lcd_power = power;
+	return 0;
+}
+
+static int tosa_lcd_get_power(struct lcd_device *lcd)
+{
+	struct tosa_lcd_data *data = lcd_get_data(lcd);
+
+	return data->lcd_power;
+}
+
+static struct lcd_ops tosa_lcd_ops = {
+	.set_power = tosa_lcd_set_power,
+	.get_power = tosa_lcd_get_power,
+};
+
+static int __devinit tosa_lcd_probe(struct spi_device *spi)
+{
+	int ret;
+	struct tosa_lcd_data *data;
+
+	data = kzalloc(sizeof(struct tosa_lcd_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	/*
+	 * bits_per_word cannot be configured in platform data
+	 */
+	spi->bits_per_word = 8;
+
+	ret = spi_setup(spi);
+	if (ret < 0)
+		goto err_spi;
+
+	data->spi = spi;
+	dev_set_drvdata(&spi->dev, data);
+
+	ret = gpio_request(TOSA_GPIO_TG_ON, "tg #pwr");
+	if (ret < 0)
+		goto err_gpio_tg;
+
+	mdelay(60);
+
+	ret = gpio_direction_output(TOSA_GPIO_TG_ON, 0);
+	if (ret < 0)
+		goto err_gpio_dir;
+
+	mdelay(60);
+	tosa_lcd_tg_init(data);
+
+	tosa_lcd_tg_on(data);
+
+	data->lcd = lcd_device_register("tosa-lcd", &spi->dev, data,
+			&tosa_lcd_ops);
+
+	if (IS_ERR(data->lcd)) {
+		ret = PTR_ERR(data->lcd);
+		data->lcd = NULL;
+		goto err_register;
+	}
+
+	return 0;
+
+err_register:
+	tosa_lcd_tg_off(data);
+err_gpio_dir:
+	gpio_free(TOSA_GPIO_TG_ON);
+err_gpio_tg:
+	dev_set_drvdata(&spi->dev, NULL);
+err_spi:
+	kfree(data);
+	return ret;
+}
+
+static int __devexit tosa_lcd_remove(struct spi_device *spi)
+{
+	struct tosa_lcd_data *data = dev_get_drvdata(&spi->dev);
+
+	lcd_device_unregister(data->lcd);
+
+	if (data->i2c)
+		i2c_unregister_device(data->i2c);
+
+	tosa_lcd_tg_off(data);
+
+	gpio_free(TOSA_GPIO_TG_ON);
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(data);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int tosa_lcd_suspend(struct spi_device *spi, pm_message_t state)
+{
+	struct tosa_lcd_data *data = dev_get_drvdata(&spi->dev);
+
+	tosa_lcd_tg_off(data);
+
+	return 0;
+}
+
+static int tosa_lcd_resume(struct spi_device *spi)
+{
+	struct tosa_lcd_data *data = dev_get_drvdata(&spi->dev);
+
+	tosa_lcd_tg_init(data);
+	if (POWER_IS_ON(data->lcd_power))
+		tosa_lcd_tg_on(data);
+	else
+		tosa_lcd_tg_off(data);
+
+	return 0;
+}
+#else
+#define tosa_lcd_suspend	NULL
+#define tosa_lcd_reume NULL
+#endif
+
+static struct spi_driver tosa_lcd_driver = {
+	.driver = {
+		.name		= "tosa-lcd",
+		.owner		= THIS_MODULE,
+	},
+	.probe		= tosa_lcd_probe,
+	.remove		= __devexit_p(tosa_lcd_remove),
+	.suspend	= tosa_lcd_suspend,
+	.resume		= tosa_lcd_resume,
+};
+
+static int __init tosa_lcd_init(void)
+{
+	return spi_register_driver(&tosa_lcd_driver);
+}
+
+static void __exit tosa_lcd_exit(void)
+{
+	spi_unregister_driver(&tosa_lcd_driver);
+}
+
+module_init(tosa_lcd_init);
+module_exit(tosa_lcd_exit);
+
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("LCD/Backlight control for Sharp SL-6000 PDA");
+
diff --git a/drivers/watchdog/w83697ug_wdt.c b/drivers/watchdog/w83697ug_wdt.c
index c73b5e2..ada8ad8 100644
--- a/drivers/watchdog/w83697ug_wdt.c
+++ b/drivers/watchdog/w83697ug_wdt.c
@@ -102,7 +102,7 @@
 
 	} else {
 		printk(KERN_ERR PFX "No W83697UG/UF could be found\n");
-		return -EIO;
+		return;
 	}
 
 	outb_p(0x07, WDT_EFER); /* point to logical device number reg */
diff --git a/drivers/xen/cpu_hotplug.c b/drivers/xen/cpu_hotplug.c
index 565280ec..974f56d 100644
--- a/drivers/xen/cpu_hotplug.c
+++ b/drivers/xen/cpu_hotplug.c
@@ -2,7 +2,7 @@
 
 #include <xen/xenbus.h>
 
-#include <asm-x86/xen/hypervisor.h>
+#include <asm/xen/hypervisor.h>
 #include <asm/cpu.h>
 
 static void enable_hotplug_cpu(int cpu)
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index 041c526..68bf2af 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -178,7 +178,7 @@
 	int ret;
 	struct p9_fid *fid;
 
-	P9_DPRINTK(P9_DEBUG_VFS, "count %d offset %lld\n", count, *offset);
+	P9_DPRINTK(P9_DEBUG_VFS, "count %zu offset %lld\n", count, *offset);
 	fid = filp->private_data;
 
 	if (count > (fid->clnt->msize - P9_IOHDRSZ))
diff --git a/fs/Kconfig b/fs/Kconfig
index e46297f..522469a 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -22,9 +22,10 @@
 config FS_MBCACHE
 # Meta block cache for Extended Attributes (ext2/ext3/ext4)
 	tristate
-	depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR
-	default y if EXT2_FS=y || EXT3_FS=y || EXT4_FS=y
-	default m if EXT2_FS=m || EXT3_FS=m || EXT4_FS=m
+	default y if EXT2_FS=y && EXT2_FS_XATTR
+	default y if EXT3_FS=y && EXT3_FS_XATTR
+	default y if EXT4_FS=y && EXT4_FS_XATTR
+	default m if EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR
 
 config REISERFS_FS
 	tristate "Reiserfs support"
diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index dfda03d..99cf390 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -45,6 +45,7 @@
 	.release	= afs_release,
 	.readdir	= afs_readdir,
 	.lock		= afs_lock,
+	.llseek		= generic_file_llseek,
 };
 
 const struct inode_operations afs_dir_inode_operations = {
diff --git a/fs/attr.c b/fs/attr.c
index 26c71ba..7a83819 100644
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -159,17 +159,17 @@
 	if (!(attr->ia_valid & ~(ATTR_KILL_SUID | ATTR_KILL_SGID)))
 		return 0;
 
+	error = security_inode_setattr(dentry, attr);
+	if (error)
+		return error;
+
 	if (ia_valid & ATTR_SIZE)
 		down_write(&dentry->d_inode->i_alloc_sem);
 
 	if (inode->i_op && inode->i_op->setattr) {
-		error = security_inode_setattr(dentry, attr);
-		if (!error)
-			error = inode->i_op->setattr(dentry, attr);
+		error = inode->i_op->setattr(dentry, attr);
 	} else {
 		error = inode_change_ok(inode, attr);
-		if (!error)
-			error = security_inode_setattr(dentry, attr);
 		if (!error) {
 			if ((ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) ||
 			    (ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid))
diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index ed8feb0..daae463 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -80,6 +80,7 @@
 	.read		= generic_read_dir,
 	.readdir	= bfs_readdir,
 	.fsync		= file_fsync,
+	.llseek		= generic_file_llseek,
 };
 
 extern void dump_imap(const char *, struct super_block *);
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 218408e..88a776f 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -840,13 +840,12 @@
  * to be used for internal purposes.  If you ever need it - reconsider
  * your API.
  */
-struct block_device *open_by_devnum(dev_t dev, unsigned mode)
+struct block_device *open_by_devnum(dev_t dev, fmode_t mode)
 {
 	struct block_device *bdev = bdget(dev);
 	int err = -ENOMEM;
-	int flags = mode & FMODE_WRITE ? O_RDWR : O_RDONLY;
 	if (bdev)
-		err = blkdev_get(bdev, mode, flags);
+		err = blkdev_get(bdev, mode);
 	return err ? ERR_PTR(err) : bdev;
 }
 
@@ -975,9 +974,7 @@
 }
 EXPORT_SYMBOL(bd_set_size);
 
-static int __blkdev_get(struct block_device *bdev, mode_t mode, unsigned flags,
-			int for_part);
-static int __blkdev_put(struct block_device *bdev, int for_part);
+static int __blkdev_put(struct block_device *bdev, fmode_t mode, int for_part);
 
 /*
  * bd_mutex locking:
@@ -986,7 +983,7 @@
  *    mutex_lock_nested(whole->bd_mutex, 1)
  */
 
-static int do_open(struct block_device *bdev, struct file *file, int for_part)
+static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part)
 {
 	struct gendisk *disk;
 	struct hd_struct *part = NULL;
@@ -994,9 +991,9 @@
 	int partno;
 	int perm = 0;
 
-	if (file->f_mode & FMODE_READ)
+	if (mode & FMODE_READ)
 		perm |= MAY_READ;
-	if (file->f_mode & FMODE_WRITE)
+	if (mode & FMODE_WRITE)
 		perm |= MAY_WRITE;
 	/*
 	 * hooks: /n/, see "layering violations".
@@ -1008,7 +1005,6 @@
 	}
 
 	ret = -ENXIO;
-	file->f_mapping = bdev->bd_inode->i_mapping;
 
 	lock_kernel();
 
@@ -1027,7 +1023,7 @@
 		if (!partno) {
 			struct backing_dev_info *bdi;
 			if (disk->fops->open) {
-				ret = disk->fops->open(bdev->bd_inode, file);
+				ret = disk->fops->open(bdev, mode);
 				if (ret)
 					goto out_clear;
 			}
@@ -1047,7 +1043,7 @@
 			if (!whole)
 				goto out_clear;
 			BUG_ON(for_part);
-			ret = __blkdev_get(whole, file->f_mode, file->f_flags, 1);
+			ret = __blkdev_get(whole, mode, 1);
 			if (ret)
 				goto out_clear;
 			bdev->bd_contains = whole;
@@ -1068,7 +1064,7 @@
 		disk = NULL;
 		if (bdev->bd_contains == bdev) {
 			if (bdev->bd_disk->fops->open) {
-				ret = bdev->bd_disk->fops->open(bdev->bd_inode, file);
+				ret = bdev->bd_disk->fops->open(bdev, mode);
 				if (ret)
 					goto out_unlock_bdev;
 			}
@@ -1088,7 +1084,7 @@
 	bdev->bd_part = NULL;
 	bdev->bd_inode->i_data.backing_dev_info = &default_backing_dev_info;
 	if (bdev != bdev->bd_contains)
-		__blkdev_put(bdev->bd_contains, 1);
+		__blkdev_put(bdev->bd_contains, mode, 1);
 	bdev->bd_contains = NULL;
  out_unlock_bdev:
 	mutex_unlock(&bdev->bd_mutex);
@@ -1104,28 +1100,9 @@
 	return ret;
 }
 
-static int __blkdev_get(struct block_device *bdev, mode_t mode, unsigned flags,
-			int for_part)
+int blkdev_get(struct block_device *bdev, fmode_t mode)
 {
-	/*
-	 * This crockload is due to bad choice of ->open() type.
-	 * It will go away.
-	 * For now, block device ->open() routine must _not_
-	 * examine anything in 'inode' argument except ->i_rdev.
-	 */
-	struct file fake_file = {};
-	struct dentry fake_dentry = {};
-	fake_file.f_mode = mode;
-	fake_file.f_flags = flags;
-	fake_file.f_path.dentry = &fake_dentry;
-	fake_dentry.d_inode = bdev->bd_inode;
-
-	return do_open(bdev, &fake_file, for_part);
-}
-
-int blkdev_get(struct block_device *bdev, mode_t mode, unsigned flags)
-{
-	return __blkdev_get(bdev, mode, flags, 0);
+	return __blkdev_get(bdev, mode, 0);
 }
 EXPORT_SYMBOL(blkdev_get);
 
@@ -1142,28 +1119,36 @@
 	 */
 	filp->f_flags |= O_LARGEFILE;
 
+	if (filp->f_flags & O_NDELAY)
+		filp->f_mode |= FMODE_NDELAY;
+	if (filp->f_flags & O_EXCL)
+		filp->f_mode |= FMODE_EXCL;
+	if ((filp->f_flags & O_ACCMODE) == 3)
+		filp->f_mode |= FMODE_WRITE_IOCTL;
+
 	bdev = bd_acquire(inode);
 	if (bdev == NULL)
 		return -ENOMEM;
 
-	res = do_open(bdev, filp, 0);
+	filp->f_mapping = bdev->bd_inode->i_mapping;
+
+	res = blkdev_get(bdev, filp->f_mode);
 	if (res)
 		return res;
 
-	if (!(filp->f_flags & O_EXCL) )
+	if (!(filp->f_mode & FMODE_EXCL))
 		return 0;
 
 	if (!(res = bd_claim(bdev, filp)))
 		return 0;
 
-	blkdev_put(bdev);
+	blkdev_put(bdev, filp->f_mode);
 	return res;
 }
 
-static int __blkdev_put(struct block_device *bdev, int for_part)
+static int __blkdev_put(struct block_device *bdev, fmode_t mode, int for_part)
 {
 	int ret = 0;
-	struct inode *bd_inode = bdev->bd_inode;
 	struct gendisk *disk = bdev->bd_disk;
 	struct block_device *victim = NULL;
 
@@ -1178,7 +1163,7 @@
 	}
 	if (bdev->bd_contains == bdev) {
 		if (disk->fops->release)
-			ret = disk->fops->release(bd_inode, NULL);
+			ret = disk->fops->release(disk, mode);
 	}
 	if (!bdev->bd_openers) {
 		struct module *owner = disk->fops->owner;
@@ -1197,13 +1182,13 @@
 	mutex_unlock(&bdev->bd_mutex);
 	bdput(bdev);
 	if (victim)
-		__blkdev_put(victim, 1);
+		__blkdev_put(victim, mode, 1);
 	return ret;
 }
 
-int blkdev_put(struct block_device *bdev)
+int blkdev_put(struct block_device *bdev, fmode_t mode)
 {
-	return __blkdev_put(bdev, 0);
+	return __blkdev_put(bdev, mode, 0);
 }
 EXPORT_SYMBOL(blkdev_put);
 
@@ -1212,12 +1197,16 @@
 	struct block_device *bdev = I_BDEV(filp->f_mapping->host);
 	if (bdev->bd_holder == filp)
 		bd_release(bdev);
-	return blkdev_put(bdev);
+	return blkdev_put(bdev, filp->f_mode);
 }
 
 static long block_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 {
-	return blkdev_ioctl(file->f_mapping->host, file, cmd, arg);
+	struct block_device *bdev = I_BDEV(file->f_mapping->host);
+	fmode_t mode = file->f_mode;
+	if (file->f_flags & O_NDELAY)
+		mode |= FMODE_NDELAY_NOW;
+	return blkdev_ioctl(bdev, mode, cmd, arg);
 }
 
 static const struct address_space_operations def_blk_aops = {
@@ -1253,7 +1242,7 @@
 	int res;
 	mm_segment_t old_fs = get_fs();
 	set_fs(KERNEL_DS);
-	res = blkdev_ioctl(bdev->bd_inode, NULL, cmd, arg);
+	res = blkdev_ioctl(bdev, 0, cmd, arg);
 	set_fs(old_fs);
 	return res;
 }
@@ -1268,33 +1257,33 @@
  * namespace if possible and return it.  Return ERR_PTR(error)
  * otherwise.
  */
-struct block_device *lookup_bdev(const char *path)
+struct block_device *lookup_bdev(const char *pathname)
 {
 	struct block_device *bdev;
 	struct inode *inode;
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	if (!path || !*path)
+	if (!pathname || !*pathname)
 		return ERR_PTR(-EINVAL);
 
-	error = path_lookup(path, LOOKUP_FOLLOW, &nd);
+	error = kern_path(pathname, LOOKUP_FOLLOW, &path);
 	if (error)
 		return ERR_PTR(error);
 
-	inode = nd.path.dentry->d_inode;
+	inode = path.dentry->d_inode;
 	error = -ENOTBLK;
 	if (!S_ISBLK(inode->i_mode))
 		goto fail;
 	error = -EACCES;
-	if (nd.path.mnt->mnt_flags & MNT_NODEV)
+	if (path.mnt->mnt_flags & MNT_NODEV)
 		goto fail;
 	error = -ENOMEM;
 	bdev = bd_acquire(inode);
 	if (!bdev)
 		goto fail;
 out:
-	path_put(&nd.path);
+	path_put(&path);
 	return bdev;
 fail:
 	bdev = ERR_PTR(error);
@@ -1303,32 +1292,29 @@
 EXPORT_SYMBOL(lookup_bdev);
 
 /**
- * open_bdev_excl  -  open a block device by name and set it up for use
+ * open_bdev_exclusive  -  open a block device by name and set it up for use
  *
  * @path:	special file representing the block device
- * @flags:	%MS_RDONLY for opening read-only
+ * @mode:	FMODE_... combination to pass be used
  * @holder:	owner for exclusion
  *
  * Open the blockdevice described by the special file at @path, claim it
  * for the @holder.
  */
-struct block_device *open_bdev_excl(const char *path, int flags, void *holder)
+struct block_device *open_bdev_exclusive(const char *path, fmode_t mode, void *holder)
 {
 	struct block_device *bdev;
-	mode_t mode = FMODE_READ;
 	int error = 0;
 
 	bdev = lookup_bdev(path);
 	if (IS_ERR(bdev))
 		return bdev;
 
-	if (!(flags & MS_RDONLY))
-		mode |= FMODE_WRITE;
-	error = blkdev_get(bdev, mode, 0);
+	error = blkdev_get(bdev, mode);
 	if (error)
 		return ERR_PTR(error);
 	error = -EACCES;
-	if (!(flags & MS_RDONLY) && bdev_read_only(bdev))
+	if ((mode & FMODE_WRITE) && bdev_read_only(bdev))
 		goto blkdev_put;
 	error = bd_claim(bdev, holder);
 	if (error)
@@ -1337,26 +1323,27 @@
 	return bdev;
 	
 blkdev_put:
-	blkdev_put(bdev);
+	blkdev_put(bdev, mode);
 	return ERR_PTR(error);
 }
 
-EXPORT_SYMBOL(open_bdev_excl);
+EXPORT_SYMBOL(open_bdev_exclusive);
 
 /**
- * close_bdev_excl  -  release a blockdevice openen by open_bdev_excl()
+ * close_bdev_exclusive  -  close a blockdevice opened by open_bdev_exclusive()
  *
  * @bdev:	blockdevice to close
+ * @mode:	mode, must match that used to open.
  *
- * This is the counterpart to open_bdev_excl().
+ * This is the counterpart to open_bdev_exclusive().
  */
-void close_bdev_excl(struct block_device *bdev)
+void close_bdev_exclusive(struct block_device *bdev, fmode_t mode)
 {
 	bd_release(bdev);
-	blkdev_put(bdev);
+	blkdev_put(bdev, mode);
 }
 
-EXPORT_SYMBOL(close_bdev_excl);
+EXPORT_SYMBOL(close_bdev_exclusive);
 
 int __invalidate_device(struct block_device *bdev)
 {
diff --git a/fs/char_dev.c b/fs/char_dev.c
index 262fa10..700697a7 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -386,15 +386,22 @@
 	cdev_put(new);
 	if (ret)
 		return ret;
+
+	ret = -ENXIO;
 	filp->f_op = fops_get(p->ops);
-	if (!filp->f_op) {
-		cdev_put(p);
-		return -ENXIO;
-	}
-	if (filp->f_op->open)
+	if (!filp->f_op)
+		goto out_cdev_put;
+
+	if (filp->f_op->open) {
 		ret = filp->f_op->open(inode,filp);
-	if (ret)
-		cdev_put(p);
+		if (ret)
+			goto out_cdev_put;
+	}
+
+	return 0;
+
+ out_cdev_put:
+	cdev_put(p);
 	return ret;
 }
 
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 06e521a..8f528ea 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,11 @@
+Version 1.55
+------------
+Various fixes to make delete of open files behavior more predictable
+(when delete of an open file fails we mark the file as "delete-on-close"
+in a way that more servers accept, but only if we can first rename the
+file to a temporary name).  Add experimental support for more safely
+handling fcntl(F_SETLEASE).
+
 Version 1.54
 ------------
 Fix premature write failure on congested networks (we would give up
@@ -13,6 +21,7 @@
 authentication (requires setting SecurityFlags to 0x30030 to enable
 lanman and plain text though).  Fix writes to be at correct offset when
 file is open with O_APPEND and file is on a directio (forcediretio) mount.
+Fix bug in rewinding readdir directory searches.  Add nodfs mount option.
 
 Version 1.53
 ------------
diff --git a/fs/cifs/README b/fs/cifs/README
index bd2343d..a439dc1 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -463,6 +463,9 @@
 		with cifs style mandatory byte range locks (and most
 		cifs servers do not yet support requesting advisory
 		byte range locks).
+ nodfs          Disable DFS (global name space support) even if the
+		server claims to support it.  This can help work around
+		a problem with parsing of DFS paths with Samba 3.0.24 server.
  remount        remount the share (often used to change from ro to rw mounts
 	        or vice versa)
  cifsacl        Report mode bits (e.g. on stat) based on the Windows ACL for
@@ -488,6 +491,19 @@
 		Note that this differs from the sign mount option in that it
 		causes encryption of data sent over this mounted share but other
 		shares mounted to the same server are unaffected.
+ locallease     This option is rarely needed. Fcntl F_SETLEASE is
+		used by some applications such as Samba and NFSv4 server to
+		check to see whether a file is cacheable.  CIFS has no way
+		to explicitly request a lease, but can check whether a file
+		is cacheable (oplocked).  Unfortunately, even if a file
+		is not oplocked, it could still be cacheable (ie cifs client
+		could grant fcntl leases if no other local processes are using
+		the file) for cases for example such as when the server does not
+		support oplocks and the user is sure that the only updates to
+		the file will be from this client. Specifying this mount option
+		will allow the cifs client to check for leases (only) locally
+		for files which are not oplocked instead of denying leases
+		in that case. (EXPERIMENTAL)
  sec            Security mode.  Allowed values are:
 			none	attempt to connection as a null user (no name)
 			krb5    Use Kerberos version 5 authentication
@@ -638,6 +654,9 @@
 	cifsacl support needed to retrieve approximated mode bits based on
 		the contents on the CIFS ACL.
 
+	lease support: cifs will check the oplock state before calling into
+	the vfs to see if we can grant a lease on a file.
+
 	DNOTIFY fcntl: needed for support of directory change 
 			    notification and perhaps later for file leases)
 
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 25ecbd5b..ac5915d 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -275,9 +275,12 @@
 
 	cifs_sb = CIFS_SB(inode->i_sb);
 
-	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM)
-		return 0;
-	else /* file mode might have been restricted at mount time
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) {
+		if ((mask & MAY_EXEC) && !execute_ok(inode))
+			return -EACCES;
+		else
+			return 0;
+	} else /* file mode might have been restricted at mount time
 		on the client (above and beyond ACL on servers) for
 		servers which do not support setting and viewing mode bits,
 		so allowing client to check permissions is useful */
@@ -309,6 +312,7 @@
 	file data or metadata */
 	cifs_inode->clientCanCacheRead = false;
 	cifs_inode->clientCanCacheAll = false;
+	cifs_inode->delete_pending = false;
 	cifs_inode->vfs_inode.i_blkbits = 14;  /* 2**14 = CIFS_MAX_MSGSIZE */
 
 	/* Can not set i_flags here - they get immediately overwritten
@@ -617,6 +621,37 @@
 	return generic_file_llseek_unlocked(file, offset, origin);
 }
 
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+static int cifs_setlease(struct file *file, long arg, struct file_lock **lease)
+{
+	/* note that this is called by vfs setlease with the BKL held
+	   although I doubt that BKL is needed here in cifs */
+	struct inode *inode = file->f_path.dentry->d_inode;
+
+	if (!(S_ISREG(inode->i_mode)))
+		return -EINVAL;
+
+	/* check if file is oplocked */
+	if (((arg == F_RDLCK) &&
+		(CIFS_I(inode)->clientCanCacheRead)) ||
+	    ((arg == F_WRLCK) &&
+		(CIFS_I(inode)->clientCanCacheAll)))
+		return generic_setlease(file, arg, lease);
+	else if (CIFS_SB(inode->i_sb)->tcon->local_lease &&
+			!CIFS_I(inode)->clientCanCacheRead)
+		/* If the server claims to support oplock on this
+		   file, then we still need to check oplock even
+		   if the local_lease mount option is set, but there
+		   are servers which do not support oplock for which
+		   this mount option may be useful if the user
+		   knows that the file won't be changed on the server
+		   by anyone else */
+		return generic_setlease(file, arg, lease);
+	else
+		return -EAGAIN;
+}
+#endif
+
 struct file_system_type cifs_fs_type = {
 	.owner = THIS_MODULE,
 	.name = "cifs",
@@ -695,6 +730,7 @@
 
 #ifdef CONFIG_CIFS_EXPERIMENTAL
 	.dir_notify = cifs_dir_notify,
+	.setlease = cifs_setlease,
 #endif /* CONFIG_CIFS_EXPERIMENTAL */
 };
 
@@ -715,6 +751,7 @@
 	.llseek = cifs_llseek,
 #ifdef CONFIG_CIFS_EXPERIMENTAL
 	.dir_notify = cifs_dir_notify,
+	.setlease = cifs_setlease,
 #endif /* CONFIG_CIFS_EXPERIMENTAL */
 };
 const struct file_operations cifs_file_nobrl_ops = {
@@ -735,6 +772,7 @@
 
 #ifdef CONFIG_CIFS_EXPERIMENTAL
 	.dir_notify = cifs_dir_notify,
+	.setlease = cifs_setlease,
 #endif /* CONFIG_CIFS_EXPERIMENTAL */
 };
 
@@ -754,6 +792,7 @@
 	.llseek = cifs_llseek,
 #ifdef CONFIG_CIFS_EXPERIMENTAL
 	.dir_notify = cifs_dir_notify,
+	.setlease = cifs_setlease,
 #endif /* CONFIG_CIFS_EXPERIMENTAL */
 };
 
@@ -765,6 +804,7 @@
 	.dir_notify = cifs_dir_notify,
 #endif /* CONFIG_CIFS_EXPERIMENTAL */
 	.unlocked_ioctl  = cifs_ioctl,
+	.llseek = generic_file_llseek,
 };
 
 static void
@@ -945,6 +985,12 @@
 				the call */
 			/* mutex_lock(&inode->i_mutex);*/
 			if (S_ISREG(inode->i_mode)) {
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+				if (CIFS_I(inode)->clientCanCacheAll == 0)
+					break_lease(inode, FMODE_READ);
+				else if (CIFS_I(inode)->clientCanCacheRead == 0)
+					break_lease(inode, FMODE_WRITE);
+#endif
 				rc = filemap_fdatawrite(inode->i_mapping);
 				if (CIFS_I(inode)->clientCanCacheRead == 0) {
 					waitrc = filemap_fdatawait(
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index f7b4a5c..074de0b 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -101,5 +101,5 @@
 extern const struct export_operations cifs_export_ops;
 #endif /* EXPERIMENTAL */
 
-#define CIFS_VERSION   "1.54"
+#define CIFS_VERSION   "1.55"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 0d22479..c791e5b 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -285,6 +285,7 @@
 	bool seal:1;      /* transport encryption for this mounted share */
 	bool unix_ext:1;  /* if false disable Linux extensions to CIFS protocol
 				for this mount even if server would support */
+	bool local_lease:1; /* check leases (only) on local system not remote */
 	/* BB add field for back pointer to sb struct(s)? */
 };
 
@@ -353,6 +354,7 @@
 	bool clientCanCacheRead:1;	/* read oplock */
 	bool clientCanCacheAll:1;	/* read and writebehind oplock */
 	bool oplockPending:1;
+	bool delete_pending:1;		/* DELETE_ON_CLOSE is set */
 	struct inode vfs_inode;
 };
 
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 6f4ffe1..843a85f 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1309,6 +1309,7 @@
 				cpu_to_le64(le32_to_cpu(pSMBr->EndOfFile));
 			pfile_info->EndOfFile = pfile_info->AllocationSize;
 			pfile_info->NumberOfLinks = cpu_to_le32(1);
+			pfile_info->DeletePending = 0;
 		}
 	}
 
@@ -1410,6 +1411,7 @@
 		    pfile_info->AllocationSize = pSMBr->AllocationSize;
 		    pfile_info->EndOfFile = pSMBr->EndOfFile;
 		    pfile_info->NumberOfLinks = cpu_to_le32(1);
+		    pfile_info->DeletePending = 0;
 		}
 	}
 
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 4c13bcd..71b7661 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -90,6 +90,8 @@
 	bool nocase:1;     /* request case insensitive filenames */
 	bool nobrl:1;      /* disable sending byte range locks to srv */
 	bool seal:1;       /* request transport encryption on share */
+	bool nodfs:1;      /* Do not request DFS, even if available */
+	bool local_lease:1; /* check leases only on local system, not remote */
 	unsigned int rsize;
 	unsigned int wsize;
 	unsigned int sockopt;
@@ -124,7 +126,7 @@
 	struct mid_q_entry *mid_entry;
 
 	spin_lock(&GlobalMid_Lock);
-	if (kthread_should_stop()) {
+	if (server->tcpStatus == CifsExiting) {
 		/* the demux thread will exit normally
 		next time through the loop */
 		spin_unlock(&GlobalMid_Lock);
@@ -184,7 +186,8 @@
 	spin_unlock(&GlobalMid_Lock);
 	up(&server->tcpSem);
 
-	while ((!kthread_should_stop()) && (server->tcpStatus != CifsGood)) {
+	while ((server->tcpStatus != CifsExiting) &&
+	       (server->tcpStatus != CifsGood)) {
 		try_to_freeze();
 		if (server->protocolType == IPV6) {
 			rc = ipv6_connect(&server->addr.sockAddr6,
@@ -201,7 +204,7 @@
 		} else {
 			atomic_inc(&tcpSesReconnectCount);
 			spin_lock(&GlobalMid_Lock);
-			if (!kthread_should_stop())
+			if (server->tcpStatus != CifsExiting)
 				server->tcpStatus = CifsGood;
 			server->sequence_number = 0;
 			spin_unlock(&GlobalMid_Lock);
@@ -356,7 +359,7 @@
 				GFP_KERNEL);
 
 	set_freezable();
-	while (!kthread_should_stop()) {
+	while (server->tcpStatus != CifsExiting) {
 		if (try_to_freeze())
 			continue;
 		if (bigbuf == NULL) {
@@ -397,7 +400,7 @@
 		    kernel_recvmsg(csocket, &smb_msg,
 				&iov, 1, pdu_length, 0 /* BB other flags? */);
 
-		if (kthread_should_stop()) {
+		if (server->tcpStatus == CifsExiting) {
 			break;
 		} else if (server->tcpStatus == CifsNeedReconnect) {
 			cFYI(1, ("Reconnect after server stopped responding"));
@@ -522,7 +525,7 @@
 		     total_read += length) {
 			length = kernel_recvmsg(csocket, &smb_msg, &iov, 1,
 						pdu_length - total_read, 0);
-			if (kthread_should_stop() ||
+			if ((server->tcpStatus == CifsExiting) ||
 			    (length == -EINTR)) {
 				/* then will exit */
 				reconnect = 2;
@@ -651,14 +654,6 @@
 	spin_unlock(&GlobalMid_Lock);
 	wake_up_all(&server->response_q);
 
-	/* don't exit until kthread_stop is called */
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	while (!kthread_should_stop()) {
-		schedule();
-		set_current_state(TASK_UNINTERRUPTIBLE);
-	}
-	set_current_state(TASK_RUNNING);
-
 	/* check if we have blocked requests that need to free */
 	/* Note that cifs_max_pending is normally 50, but
 	can be set at module install time to as little as two */
@@ -755,6 +750,7 @@
 	write_unlock(&GlobalSMBSeslock);
 
 	kfree(server->hostname);
+	task_to_wake = xchg(&server->tsk, NULL);
 	kfree(server);
 
 	length = atomic_dec_return(&tcpSesAllocCount);
@@ -762,6 +758,16 @@
 		mempool_resize(cifs_req_poolp, length + cifs_min_rcv,
 				GFP_KERNEL);
 
+	/* if server->tsk was NULL then wait for a signal before exiting */
+	if (!task_to_wake) {
+		set_current_state(TASK_INTERRUPTIBLE);
+		while (!signal_pending(current)) {
+			schedule();
+			set_current_state(TASK_INTERRUPTIBLE);
+		}
+		set_current_state(TASK_RUNNING);
+	}
+
 	return 0;
 }
 
@@ -1218,6 +1224,8 @@
 			vol->sfu_emul = 1;
 		} else if (strnicmp(data, "nosfu", 5) == 0) {
 			vol->sfu_emul = 0;
+		} else if (strnicmp(data, "nodfs", 5) == 0) {
+			vol->nodfs = 1;
 		} else if (strnicmp(data, "posixpaths", 10) == 0) {
 			vol->posix_paths = 1;
 		} else if (strnicmp(data, "noposixpaths", 12) == 0) {
@@ -1268,6 +1276,10 @@
 			vol->no_psx_acl = 0;
 		} else if (strnicmp(data, "noacl", 5) == 0) {
 			vol->no_psx_acl = 1;
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+		} else if (strnicmp(data, "locallease", 6) == 0) {
+			vol->local_lease = 1;
+#endif
 		} else if (strnicmp(data, "sign", 4) == 0) {
 			vol->secFlg |= CIFSSEC_MUST_SIGN;
 		} else if (strnicmp(data, "seal", 4) == 0) {
@@ -1845,6 +1857,16 @@
 	}
 }
 
+static void
+kill_cifsd(struct TCP_Server_Info *server)
+{
+	struct task_struct *task;
+
+	task = xchg(&server->tsk, NULL);
+	if (task)
+		force_sig(SIGKILL, task);
+}
+
 int
 cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
 	   char *mount_data, const char *devname)
@@ -2166,6 +2188,7 @@
 			   for the retry flag is used */
 			tcon->retry = volume_info.retry;
 			tcon->nocase = volume_info.nocase;
+			tcon->local_lease = volume_info.local_lease;
 			if (tcon->seal != volume_info.seal)
 				cERROR(1, ("transport encryption setting "
 					   "conflicts with existing tid"));
@@ -2197,6 +2220,12 @@
 						volume_info.UNC,
 						tcon, cifs_sb->local_nls);
 					cFYI(1, ("CIFS Tcon rc = %d", rc));
+					if (volume_info.nodfs) {
+						tcon->Flags &=
+							~SMB_SHARE_IS_IN_DFS;
+						cFYI(1, ("DFS disabled (%d)",
+							tcon->Flags));
+					}
 				}
 				if (!rc) {
 					atomic_inc(&pSesInfo->inUse);
@@ -2225,14 +2254,7 @@
 			spin_lock(&GlobalMid_Lock);
 			srvTcp->tcpStatus = CifsExiting;
 			spin_unlock(&GlobalMid_Lock);
-			if (srvTcp->tsk) {
-				/* If we could verify that kthread_stop would
-				   always wake up processes blocked in
-				   tcp in recv_mesg then we could remove the
-				   send_sig call */
-				force_sig(SIGKILL, srvTcp->tsk);
-				kthread_stop(srvTcp->tsk);
-			}
+			kill_cifsd(srvTcp);
 		}
 		 /* If find_unc succeeded then rc == 0 so we can not end */
 		if (tcon)  /* up accidently freeing someone elses tcon struct */
@@ -2245,19 +2267,15 @@
 					temp_rc = CIFSSMBLogoff(xid, pSesInfo);
 					/* if the socketUseCount is now zero */
 					if ((temp_rc == -ESHUTDOWN) &&
-					    (pSesInfo->server) &&
-					    (pSesInfo->server->tsk)) {
-						force_sig(SIGKILL,
-							pSesInfo->server->tsk);
-						kthread_stop(pSesInfo->server->tsk);
-					}
+					    (pSesInfo->server))
+						kill_cifsd(pSesInfo->server);
 				} else {
 					cFYI(1, ("No session or bad tcon"));
-					if ((pSesInfo->server) &&
-					    (pSesInfo->server->tsk)) {
-						force_sig(SIGKILL,
-							pSesInfo->server->tsk);
-						kthread_stop(pSesInfo->server->tsk);
+					if (pSesInfo->server) {
+						spin_lock(&GlobalMid_Lock);
+						srvTcp->tcpStatus = CifsExiting;
+						spin_unlock(&GlobalMid_Lock);
+						kill_cifsd(pSesInfo->server);
 					}
 				}
 				sesInfoFree(pSesInfo);
@@ -3544,7 +3562,6 @@
 	int rc = 0;
 	int xid;
 	struct cifsSesInfo *ses = NULL;
-	struct task_struct *cifsd_task;
 	char *tmp;
 
 	xid = GetXid();
@@ -3560,7 +3577,6 @@
 		tconInfoFree(cifs_sb->tcon);
 		if ((ses) && (ses->server)) {
 			/* save off task so we do not refer to ses later */
-			cifsd_task = ses->server->tsk;
 			cFYI(1, ("About to do SMBLogoff "));
 			rc = CIFSSMBLogoff(xid, ses);
 			if (rc == -EBUSY) {
@@ -3568,10 +3584,8 @@
 				return 0;
 			} else if (rc == -ESHUTDOWN) {
 				cFYI(1, ("Waking up socket by sending signal"));
-				if (cifsd_task) {
-					force_sig(SIGKILL, cifsd_task);
-					kthread_stop(cifsd_task);
-				}
+				if (ses->server)
+					kill_cifsd(ses->server);
 				rc = 0;
 			} /* else - we have an smb session
 				left on this socket do not kill cifsd */
@@ -3701,7 +3715,9 @@
 		cERROR(1, ("Send error in SessSetup = %d", rc));
 	} else {
 		cFYI(1, ("CIFS Session Established successfully"));
+			spin_lock(&GlobalMid_Lock);
 			pSesInfo->status = CifsGood;
+			spin_unlock(&GlobalMid_Lock);
 	}
 
 ss_err_exit:
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index a8c8333..d54fa8a 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -506,6 +506,7 @@
 	inode = *pinode;
 	cifsInfo = CIFS_I(inode);
 	cifsInfo->cifsAttrs = attr;
+	cifsInfo->delete_pending = pfindData->DeletePending ? true : false;
 	cFYI(1, ("Old time %ld", cifsInfo->time));
 	cifsInfo->time = jiffies;
 	cFYI(1, ("New time %ld", cifsInfo->time));
@@ -772,63 +773,106 @@
  * anything else.
  */
 static int
-cifs_rename_pending_delete(char *full_path, struct inode *inode, int xid)
+cifs_rename_pending_delete(char *full_path, struct dentry *dentry, int xid)
 {
 	int oplock = 0;
 	int rc;
 	__u16 netfid;
+	struct inode *inode = dentry->d_inode;
 	struct cifsInodeInfo *cifsInode = CIFS_I(inode);
 	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
 	struct cifsTconInfo *tcon = cifs_sb->tcon;
-	__u32 dosattr;
-	FILE_BASIC_INFO *info_buf;
+	__u32 dosattr, origattr;
+	FILE_BASIC_INFO *info_buf = NULL;
 
 	rc = CIFSSMBOpen(xid, tcon, full_path, FILE_OPEN,
-			 DELETE|FILE_WRITE_ATTRIBUTES,
-			 CREATE_NOT_DIR|CREATE_DELETE_ON_CLOSE,
+			 DELETE|FILE_WRITE_ATTRIBUTES, CREATE_NOT_DIR,
 			 &netfid, &oplock, NULL, cifs_sb->local_nls,
 			 cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
 	if (rc != 0)
 		goto out;
 
-	/* set ATTR_HIDDEN and clear ATTR_READONLY */
-	cifsInode = CIFS_I(inode);
-	dosattr = cifsInode->cifsAttrs & ~ATTR_READONLY;
+	origattr = cifsInode->cifsAttrs;
+	if (origattr == 0)
+		origattr |= ATTR_NORMAL;
+
+	dosattr = origattr & ~ATTR_READONLY;
 	if (dosattr == 0)
 		dosattr |= ATTR_NORMAL;
 	dosattr |= ATTR_HIDDEN;
 
-	info_buf = kzalloc(sizeof(*info_buf), GFP_KERNEL);
-	if (info_buf == NULL) {
-		rc = -ENOMEM;
-		goto out_close;
+	/* set ATTR_HIDDEN and clear ATTR_READONLY, but only if needed */
+	if (dosattr != origattr) {
+		info_buf = kzalloc(sizeof(*info_buf), GFP_KERNEL);
+		if (info_buf == NULL) {
+			rc = -ENOMEM;
+			goto out_close;
+		}
+		info_buf->Attributes = cpu_to_le32(dosattr);
+		rc = CIFSSMBSetFileInfo(xid, tcon, info_buf, netfid,
+					current->tgid);
+		/* although we would like to mark the file hidden
+ 		   if that fails we will still try to rename it */
+		if (rc != 0)
+			cifsInode->cifsAttrs = dosattr;
+		else
+			dosattr = origattr; /* since not able to change them */
 	}
-	info_buf->Attributes = cpu_to_le32(dosattr);
-	rc = CIFSSMBSetFileInfo(xid, tcon, info_buf, netfid, current->tgid);
-	kfree(info_buf);
-	if (rc != 0)
-		goto out_close;
-	cifsInode->cifsAttrs = dosattr;
 
-	/* silly-rename the file */
-	CIFSSMBRenameOpenFile(xid, tcon, netfid, NULL, cifs_sb->local_nls,
+	/* rename the file */
+	rc = CIFSSMBRenameOpenFile(xid, tcon, netfid, NULL, cifs_sb->local_nls,
 				   cifs_sb->mnt_cifs_flags &
 					    CIFS_MOUNT_MAP_SPECIAL_CHR);
+	if (rc != 0) {
+		rc = -ETXTBSY;
+		goto undo_setattr;
+	}
 
-	/* set DELETE_ON_CLOSE */
-	rc = CIFSSMBSetFileDisposition(xid, tcon, true, netfid, current->tgid);
-
-	/*
-	 * some samba versions return -ENOENT when we try to set the file
-	 * disposition here. Likely a samba bug, but work around it for now
-	 */
-	if (rc == -ENOENT)
-		rc = 0;
+	/* try to set DELETE_ON_CLOSE */
+	if (!cifsInode->delete_pending) {
+		rc = CIFSSMBSetFileDisposition(xid, tcon, true, netfid,
+					       current->tgid);
+		/*
+		 * some samba versions return -ENOENT when we try to set the
+		 * file disposition here. Likely a samba bug, but work around
+		 * it for now. This means that some cifsXXX files may hang
+		 * around after they shouldn't.
+		 *
+		 * BB: remove this hack after more servers have the fix
+		 */
+		if (rc == -ENOENT)
+			rc = 0;
+		else if (rc != 0) {
+			rc = -ETXTBSY;
+			goto undo_rename;
+		}
+		cifsInode->delete_pending = true;
+	}
 
 out_close:
 	CIFSSMBClose(xid, tcon, netfid);
 out:
+	kfree(info_buf);
 	return rc;
+
+	/*
+	 * reset everything back to the original state. Don't bother
+	 * dealing with errors here since we can't do anything about
+	 * them anyway.
+	 */
+undo_rename:
+	CIFSSMBRenameOpenFile(xid, tcon, netfid, dentry->d_name.name,
+				cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
+					    CIFS_MOUNT_MAP_SPECIAL_CHR);
+undo_setattr:
+	if (dosattr != origattr) {
+		info_buf->Attributes = cpu_to_le32(origattr);
+		if (!CIFSSMBSetFileInfo(xid, tcon, info_buf, netfid,
+					current->tgid))
+			cifsInode->cifsAttrs = origattr;
+	}
+
+	goto out_close;
 }
 
 int cifs_unlink(struct inode *dir, struct dentry *dentry)
@@ -878,7 +922,7 @@
 	} else if (rc == -ENOENT) {
 		d_drop(dentry);
 	} else if (rc == -ETXTBSY) {
-		rc = cifs_rename_pending_delete(full_path, inode, xid);
+		rc = cifs_rename_pending_delete(full_path, dentry, xid);
 		if (rc == 0)
 			drop_nlink(inode);
 	} else if (rc == -EACCES && dosattr == 0) {
@@ -1241,22 +1285,21 @@
 	return rc;
 }
 
-int cifs_rename(struct inode *source_inode, struct dentry *source_direntry,
-	struct inode *target_inode, struct dentry *target_direntry)
+int cifs_rename(struct inode *source_dir, struct dentry *source_dentry,
+	struct inode *target_dir, struct dentry *target_dentry)
 {
 	char *fromName = NULL;
 	char *toName = NULL;
 	struct cifs_sb_info *cifs_sb_source;
 	struct cifs_sb_info *cifs_sb_target;
-	struct cifsTconInfo *pTcon;
+	struct cifsTconInfo *tcon;
 	FILE_UNIX_BASIC_INFO *info_buf_source = NULL;
 	FILE_UNIX_BASIC_INFO *info_buf_target;
-	int xid;
-	int rc;
+	int xid, rc, tmprc;
 
-	cifs_sb_target = CIFS_SB(target_inode->i_sb);
-	cifs_sb_source = CIFS_SB(source_inode->i_sb);
-	pTcon = cifs_sb_source->tcon;
+	cifs_sb_target = CIFS_SB(target_dir->i_sb);
+	cifs_sb_source = CIFS_SB(source_dir->i_sb);
+	tcon = cifs_sb_source->tcon;
 
 	xid = GetXid();
 
@@ -1264,7 +1307,7 @@
 	 * BB: this might be allowed if same server, but different share.
 	 * Consider adding support for this
 	 */
-	if (pTcon != cifs_sb_target->tcon) {
+	if (tcon != cifs_sb_target->tcon) {
 		rc = -EXDEV;
 		goto cifs_rename_exit;
 	}
@@ -1273,65 +1316,65 @@
 	 * we already have the rename sem so we do not need to
 	 * grab it again here to protect the path integrity
 	 */
-	fromName = build_path_from_dentry(source_direntry);
+	fromName = build_path_from_dentry(source_dentry);
 	if (fromName == NULL) {
 		rc = -ENOMEM;
 		goto cifs_rename_exit;
 	}
 
-	toName = build_path_from_dentry(target_direntry);
+	toName = build_path_from_dentry(target_dentry);
 	if (toName == NULL) {
 		rc = -ENOMEM;
 		goto cifs_rename_exit;
 	}
 
-	rc = cifs_do_rename(xid, source_direntry, fromName,
-			    target_direntry, toName);
+	rc = cifs_do_rename(xid, source_dentry, fromName,
+			    target_dentry, toName);
 
-	if (rc == -EEXIST) {
-		if (pTcon->unix_ext) {
-			/*
-			 * Are src and dst hardlinks of same inode? We can
-			 * only tell with unix extensions enabled
-			 */
-			info_buf_source =
-				kmalloc(2 * sizeof(FILE_UNIX_BASIC_INFO),
-						GFP_KERNEL);
-			if (info_buf_source == NULL)
-				goto unlink_target;
-
-			info_buf_target = info_buf_source + 1;
-			rc = CIFSSMBUnixQPathInfo(xid, pTcon, fromName,
-						info_buf_source,
-						cifs_sb_source->local_nls,
-						cifs_sb_source->mnt_cifs_flags &
-						CIFS_MOUNT_MAP_SPECIAL_CHR);
-			if (rc != 0)
-				goto unlink_target;
-
-			rc = CIFSSMBUnixQPathInfo(xid, pTcon,
-						toName, info_buf_target,
-						cifs_sb_target->local_nls,
-						/* remap based on source sb */
-						cifs_sb_source->mnt_cifs_flags &
-						CIFS_MOUNT_MAP_SPECIAL_CHR);
-
-			if (rc == 0 && (info_buf_source->UniqueId ==
-					info_buf_target->UniqueId))
-				/* same file, POSIX says that this is a noop */
-				goto cifs_rename_exit;
-		} /* else ... BB we could add the same check for Windows by
-		     checking the UniqueId via FILE_INTERNAL_INFO */
-unlink_target:
+	if (rc == -EEXIST && tcon->unix_ext) {
 		/*
-		 * we either can not tell the files are hardlinked (as with
-		 * Windows servers) or files are not hardlinked. Delete the
-		 * target manually before renaming to follow POSIX rather than
-		 * Windows semantics
+		 * Are src and dst hardlinks of same inode? We can
+		 * only tell with unix extensions enabled
 		 */
-		cifs_unlink(target_inode, target_direntry);
-		rc = cifs_do_rename(xid, source_direntry, fromName,
-				    target_direntry, toName);
+		info_buf_source =
+			kmalloc(2 * sizeof(FILE_UNIX_BASIC_INFO),
+					GFP_KERNEL);
+		if (info_buf_source == NULL) {
+			rc = -ENOMEM;
+			goto cifs_rename_exit;
+		}
+
+		info_buf_target = info_buf_source + 1;
+		tmprc = CIFSSMBUnixQPathInfo(xid, tcon, fromName,
+					info_buf_source,
+					cifs_sb_source->local_nls,
+					cifs_sb_source->mnt_cifs_flags &
+					CIFS_MOUNT_MAP_SPECIAL_CHR);
+		if (tmprc != 0)
+			goto unlink_target;
+
+		tmprc = CIFSSMBUnixQPathInfo(xid, tcon,
+					toName, info_buf_target,
+					cifs_sb_target->local_nls,
+					/* remap based on source sb */
+					cifs_sb_source->mnt_cifs_flags &
+					CIFS_MOUNT_MAP_SPECIAL_CHR);
+
+		if (tmprc == 0 && (info_buf_source->UniqueId ==
+				   info_buf_target->UniqueId))
+			/* same file, POSIX says that this is a noop */
+			goto cifs_rename_exit;
+	} /* else ... BB we could add the same check for Windows by
+		     checking the UniqueId via FILE_INTERNAL_INFO */
+
+unlink_target:
+	if ((rc == -EACCES) || (rc == -EEXIST)) {
+		tmprc = cifs_unlink(target_dir, target_dentry);
+		if (tmprc)
+			goto cifs_rename_exit;
+
+		rc = cifs_do_rename(xid, source_dentry, fromName,
+				    target_dentry, toName);
 	}
 
 cifs_rename_exit:
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 765adf1..58d5729 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -762,14 +762,15 @@
 				 rc));
 			return rc;
 		}
+		cifs_save_resume_key(cifsFile->srch_inf.last_entry, cifsFile);
 	}
 
 	while ((index_to_find >= cifsFile->srch_inf.index_of_last_entry) &&
 	      (rc == 0) && !cifsFile->srch_inf.endOfSearch) {
 		cFYI(1, ("calling findnext2"));
-		cifs_save_resume_key(cifsFile->srch_inf.last_entry, cifsFile);
 		rc = CIFSFindNext(xid, pTcon, cifsFile->netfid,
 				  &cifsFile->srch_inf);
+		cifs_save_resume_key(cifsFile->srch_inf.last_entry, cifsFile);
 		if (rc)
 			return -ENOENT;
 	}
diff --git a/fs/coda/dir.c b/fs/coda/dir.c
index c591622..75b1fa9 100644
--- a/fs/coda/dir.c
+++ b/fs/coda/dir.c
@@ -146,6 +146,9 @@
 	if (!mask)
 		return 0; 
 
+	if ((mask & MAY_EXEC) && !execute_ok(inode))
+		return -EACCES;
+
 	lock_kernel();
 
 	if (coda_cache_check(inode, mask))
diff --git a/fs/coda/pioctl.c b/fs/coda/pioctl.c
index c513654..773f2ce 100644
--- a/fs/coda/pioctl.c
+++ b/fs/coda/pioctl.c
@@ -43,7 +43,7 @@
 /* the coda pioctl inode ops */
 static int coda_ioctl_permission(struct inode *inode, int mask)
 {
-        return 0;
+	return (mask & MAY_EXEC) ? -EACCES : 0;
 }
 
 static int coda_pioctl(struct inode * inode, struct file * filp, 
diff --git a/fs/coda/psdev.c b/fs/coda/psdev.c
index cfd29da..0376ac6 100644
--- a/fs/coda/psdev.c
+++ b/fs/coda/psdev.c
@@ -2,7 +2,7 @@
  *      	An implementation of a loadable kernel mode driver providing
  *		multiple kernel/user space bidirectional communications links.
  *
- * 		Author: 	Alan Cox <alan@redhat.com>
+ * 		Author: 	Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  *		This program is free software; you can redistribute it and/or
  *		modify it under the terms of the GNU General Public License
diff --git a/fs/compat.c b/fs/compat.c
index 5f9ec44..e5f49f5 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -869,7 +869,7 @@
 	buf.dirent = dirent;
 
 	error = vfs_readdir(file, compat_fillonedir, &buf);
-	if (error >= 0)
+	if (buf.result)
 		error = buf.result;
 
 	fput(file);
@@ -956,9 +956,8 @@
 	buf.error = 0;
 
 	error = vfs_readdir(file, compat_filldir, &buf);
-	if (error < 0)
-		goto out_putf;
-	error = buf.error;
+	if (error >= 0)
+		error = buf.error;
 	lastdirent = buf.previous;
 	if (lastdirent) {
 		if (put_user(file->f_pos, &lastdirent->d_off))
@@ -966,8 +965,6 @@
 		else
 			error = count - buf.count;
 	}
-
-out_putf:
 	fput(file);
 out:
 	return error;
@@ -1047,19 +1044,16 @@
 	buf.error = 0;
 
 	error = vfs_readdir(file, compat_filldir64, &buf);
-	if (error < 0)
-		goto out_putf;
-	error = buf.error;
+	if (error >= 0)
+		error = buf.error;
 	lastdirent = buf.previous;
 	if (lastdirent) {
 		typeof(lastdirent->d_off) d_off = file->f_pos;
-		error = -EFAULT;
 		if (__put_user_unaligned(d_off, &lastdirent->d_off))
-			goto out_putf;
-		error = count - buf.count;
+			error = -EFAULT;
+		else
+			error = count - buf.count;
 	}
-
-out_putf:
 	fput(file);
 out:
 	return error;
@@ -1475,6 +1469,57 @@
 
 #define __COMPAT_NFDBITS       (8 * sizeof(compat_ulong_t))
 
+static int poll_select_copy_remaining(struct timespec *end_time, void __user *p,
+				      int timeval, int ret)
+{
+	struct timespec ts;
+
+	if (!p)
+		return ret;
+
+	if (current->personality & STICKY_TIMEOUTS)
+		goto sticky;
+
+	/* No update for zero timeout */
+	if (!end_time->tv_sec && !end_time->tv_nsec)
+		return ret;
+
+	ktime_get_ts(&ts);
+	ts = timespec_sub(*end_time, ts);
+	if (ts.tv_sec < 0)
+		ts.tv_sec = ts.tv_nsec = 0;
+
+	if (timeval) {
+		struct compat_timeval rtv;
+
+		rtv.tv_sec = ts.tv_sec;
+		rtv.tv_usec = ts.tv_nsec / NSEC_PER_USEC;
+
+		if (!copy_to_user(p, &rtv, sizeof(rtv)))
+			return ret;
+	} else {
+		struct compat_timespec rts;
+
+		rts.tv_sec = ts.tv_sec;
+		rts.tv_nsec = ts.tv_nsec;
+
+		if (!copy_to_user(p, &rts, sizeof(rts)))
+			return ret;
+	}
+	/*
+	 * If an application puts its timeval in read-only memory, we
+	 * don't want the Linux-specific update to the timeval to
+	 * cause a fault after the select has completed
+	 * successfully. However, because we're not updating the
+	 * timeval, we can't restart the system call.
+	 */
+
+sticky:
+	if (ret == -ERESTARTNOHAND)
+		ret = -EINTR;
+	return ret;
+}
+
 /*
  * Ooo, nasty.  We need here to frob 32-bit unsigned longs to
  * 64-bit unsigned longs.
@@ -1556,7 +1601,8 @@
 	((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1)
 
 int compat_core_sys_select(int n, compat_ulong_t __user *inp,
-	compat_ulong_t __user *outp, compat_ulong_t __user *exp, s64 *timeout)
+	compat_ulong_t __user *outp, compat_ulong_t __user *exp,
+	struct timespec *end_time)
 {
 	fd_set_bits fds;
 	void *bits;
@@ -1603,7 +1649,7 @@
 	zero_fd_set(n, fds.res_out);
 	zero_fd_set(n, fds.res_ex);
 
-	ret = do_select(n, &fds, timeout);
+	ret = do_select(n, &fds, end_time);
 
 	if (ret < 0)
 		goto out;
@@ -1629,7 +1675,7 @@
 	compat_ulong_t __user *outp, compat_ulong_t __user *exp,
 	struct compat_timeval __user *tvp)
 {
-	s64 timeout = -1;
+	struct timespec end_time, *to = NULL;
 	struct compat_timeval tv;
 	int ret;
 
@@ -1637,43 +1683,15 @@
 		if (copy_from_user(&tv, tvp, sizeof(tv)))
 			return -EFAULT;
 
-		if (tv.tv_sec < 0 || tv.tv_usec < 0)
+		to = &end_time;
+		if (poll_select_set_timeout(to,
+				tv.tv_sec + (tv.tv_usec / USEC_PER_SEC),
+				(tv.tv_usec % USEC_PER_SEC) * NSEC_PER_USEC))
 			return -EINVAL;
-
-		/* Cast to u64 to make GCC stop complaining */
-		if ((u64)tv.tv_sec >= (u64)MAX_INT64_SECONDS)
-			timeout = -1;	/* infinite */
-		else {
-			timeout = DIV_ROUND_UP(tv.tv_usec, 1000000/HZ);
-			timeout += tv.tv_sec * HZ;
-		}
 	}
 
-	ret = compat_core_sys_select(n, inp, outp, exp, &timeout);
-
-	if (tvp) {
-		struct compat_timeval rtv;
-
-		if (current->personality & STICKY_TIMEOUTS)
-			goto sticky;
-		rtv.tv_usec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ));
-		rtv.tv_sec = timeout;
-		if (compat_timeval_compare(&rtv, &tv) >= 0)
-			rtv = tv;
-		if (copy_to_user(tvp, &rtv, sizeof(rtv))) {
-sticky:
-			/*
-			 * If an application puts its timeval in read-only
-			 * memory, we don't want the Linux-specific update to
-			 * the timeval to cause a fault after the select has
-			 * completed successfully. However, because we're not
-			 * updating the timeval, we can't restart the system
-			 * call.
-			 */
-			if (ret == -ERESTARTNOHAND)
-				ret = -EINTR;
-		}
-	}
+	ret = compat_core_sys_select(n, inp, outp, exp, to);
+	ret = poll_select_copy_remaining(&end_time, tvp, 1, ret);
 
 	return ret;
 }
@@ -1686,15 +1704,16 @@
 {
 	compat_sigset_t ss32;
 	sigset_t ksigmask, sigsaved;
-	s64 timeout = MAX_SCHEDULE_TIMEOUT;
 	struct compat_timespec ts;
+	struct timespec end_time, *to = NULL;
 	int ret;
 
 	if (tsp) {
 		if (copy_from_user(&ts, tsp, sizeof(ts)))
 			return -EFAULT;
 
-		if (ts.tv_sec < 0 || ts.tv_nsec < 0)
+		to = &end_time;
+		if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec))
 			return -EINVAL;
 	}
 
@@ -1709,51 +1728,8 @@
 		sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
 	}
 
-	do {
-		if (tsp) {
-			if ((unsigned long)ts.tv_sec < MAX_SELECT_SECONDS) {
-				timeout = DIV_ROUND_UP(ts.tv_nsec, 1000000000/HZ);
-				timeout += ts.tv_sec * (unsigned long)HZ;
-				ts.tv_sec = 0;
-				ts.tv_nsec = 0;
-			} else {
-				ts.tv_sec -= MAX_SELECT_SECONDS;
-				timeout = MAX_SELECT_SECONDS * HZ;
-			}
-		}
-
-		ret = compat_core_sys_select(n, inp, outp, exp, &timeout);
-
-	} while (!ret && !timeout && tsp && (ts.tv_sec || ts.tv_nsec));
-
-	if (tsp) {
-		struct compat_timespec rts;
-
-		if (current->personality & STICKY_TIMEOUTS)
-			goto sticky;
-
-		rts.tv_sec = timeout / HZ;
-		rts.tv_nsec = (timeout % HZ) * (NSEC_PER_SEC/HZ);
-		if (rts.tv_nsec >= NSEC_PER_SEC) {
-			rts.tv_sec++;
-			rts.tv_nsec -= NSEC_PER_SEC;
-		}
-		if (compat_timespec_compare(&rts, &ts) >= 0)
-			rts = ts;
-		if (copy_to_user(tsp, &rts, sizeof(rts))) {
-sticky:
-			/*
-			 * If an application puts its timeval in read-only
-			 * memory, we don't want the Linux-specific update to
-			 * the timeval to cause a fault after the select has
-			 * completed successfully. However, because we're not
-			 * updating the timeval, we can't restart the system
-			 * call.
-			 */
-			if (ret == -ERESTARTNOHAND)
-				ret = -EINTR;
-		}
-	}
+	ret = compat_core_sys_select(n, inp, outp, exp, to);
+	ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
 
 	if (ret == -ERESTARTNOHAND) {
 		/*
@@ -1798,18 +1774,16 @@
 	compat_sigset_t ss32;
 	sigset_t ksigmask, sigsaved;
 	struct compat_timespec ts;
-	s64 timeout = -1;
+	struct timespec end_time, *to = NULL;
 	int ret;
 
 	if (tsp) {
 		if (copy_from_user(&ts, tsp, sizeof(ts)))
 			return -EFAULT;
 
-		/* We assume that ts.tv_sec is always lower than
-		   the number of seconds that can be expressed in
-		   an s64. Otherwise the compiler bitches at us */
-		timeout = DIV_ROUND_UP(ts.tv_nsec, 1000000000/HZ);
-		timeout += ts.tv_sec * HZ;
+		to = &end_time;
+		if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec))
+			return -EINVAL;
 	}
 
 	if (sigmask) {
@@ -1823,7 +1797,7 @@
 		sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
 	}
 
-	ret = do_sys_poll(ufds, nfds, &timeout);
+	ret = do_sys_poll(ufds, nfds, to);
 
 	/* We can restart this syscall, usually */
 	if (ret == -EINTR) {
@@ -1841,31 +1815,7 @@
 	} else if (sigmask)
 		sigprocmask(SIG_SETMASK, &sigsaved, NULL);
 
-	if (tsp && timeout >= 0) {
-		struct compat_timespec rts;
-
-		if (current->personality & STICKY_TIMEOUTS)
-			goto sticky;
-		/* Yes, we know it's actually an s64, but it's also positive. */
-		rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
-					1000;
-		rts.tv_sec = timeout;
-		if (compat_timespec_compare(&rts, &ts) >= 0)
-			rts = ts;
-		if (copy_to_user(tsp, &rts, sizeof(rts))) {
-sticky:
-			/*
-			 * If an application puts its timeval in read-only
-			 * memory, we don't want the Linux-specific update to
-			 * the timeval to cause a fault after the select has
-			 * completed successfully. However, because we're not
-			 * updating the timeval, we can't restart the system
-			 * call.
-			 */
-			if (ret == -ERESTARTNOHAND && timeout >= 0)
-				ret = -EINTR;
-		}
-	}
+	ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
 
 	return ret;
 }
diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c
index bf74973..932a92b 100644
--- a/fs/configfs/symlink.c
+++ b/fs/configfs/symlink.c
@@ -108,18 +108,18 @@
 }
 
 
-static int get_target(const char *symname, struct nameidata *nd,
+static int get_target(const char *symname, struct path *path,
 		      struct config_item **target)
 {
 	int ret;
 
-	ret = path_lookup(symname, LOOKUP_FOLLOW|LOOKUP_DIRECTORY, nd);
+	ret = kern_path(symname, LOOKUP_FOLLOW|LOOKUP_DIRECTORY, path);
 	if (!ret) {
-		if (nd->path.dentry->d_sb == configfs_sb) {
-			*target = configfs_get_config_item(nd->path.dentry);
+		if (path->dentry->d_sb == configfs_sb) {
+			*target = configfs_get_config_item(path->dentry);
 			if (!*target) {
 				ret = -ENOENT;
-				path_put(&nd->path);
+				path_put(path);
 			}
 		} else
 			ret = -EPERM;
@@ -132,7 +132,7 @@
 int configfs_symlink(struct inode *dir, struct dentry *dentry, const char *symname)
 {
 	int ret;
-	struct nameidata nd;
+	struct path path;
 	struct configfs_dirent *sd;
 	struct config_item *parent_item;
 	struct config_item *target_item;
@@ -159,7 +159,7 @@
 	    !type->ct_item_ops->allow_link)
 		goto out_put;
 
-	ret = get_target(symname, &nd, &target_item);
+	ret = get_target(symname, &path, &target_item);
 	if (ret)
 		goto out_put;
 
@@ -174,7 +174,7 @@
 	}
 
 	config_item_put(target_item);
-	path_put(&nd.path);
+	path_put(&path);
 
 out_put:
 	config_item_put(parent_item);
diff --git a/fs/dcache.c b/fs/dcache.c
index e7a1a99..a1d86c7 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -69,6 +69,7 @@
 
 static void __d_free(struct dentry *dentry)
 {
+	WARN_ON(!list_empty(&dentry->d_alias));
 	if (dname_external(dentry))
 		kfree(dentry->d_name.name);
 	kmem_cache_free(dentry_cache, dentry); 
@@ -174,9 +175,12 @@
 	dentry_stat.nr_dentry--;	/* For d_free, below */
 	/*drops the locks, at that point nobody can reach this dentry */
 	dentry_iput(dentry);
-	parent = dentry->d_parent;
+	if (IS_ROOT(dentry))
+		parent = NULL;
+	else
+		parent = dentry->d_parent;
 	d_free(dentry);
-	return dentry == parent ? NULL : parent;
+	return parent;
 }
 
 /* 
@@ -666,11 +670,12 @@
 				BUG();
 			}
 
-			parent = dentry->d_parent;
-			if (parent == dentry)
+			if (IS_ROOT(dentry))
 				parent = NULL;
-			else
+			else {
+				parent = dentry->d_parent;
 				atomic_dec(&parent->d_count);
+			}
 
 			list_del(&dentry->d_u.d_child);
 			detached++;
@@ -977,6 +982,15 @@
 	return d_alloc(parent, &q);
 }
 
+/* the caller must hold dcache_lock */
+static void __d_instantiate(struct dentry *dentry, struct inode *inode)
+{
+	if (inode)
+		list_add(&dentry->d_alias, &inode->i_dentry);
+	dentry->d_inode = inode;
+	fsnotify_d_instantiate(dentry, inode);
+}
+
 /**
  * d_instantiate - fill in inode information for a dentry
  * @entry: dentry to complete
@@ -996,10 +1010,7 @@
 {
 	BUG_ON(!list_empty(&entry->d_alias));
 	spin_lock(&dcache_lock);
-	if (inode)
-		list_add(&entry->d_alias, &inode->i_dentry);
-	entry->d_inode = inode;
-	fsnotify_d_instantiate(entry, inode);
+	__d_instantiate(entry, inode);
 	spin_unlock(&dcache_lock);
 	security_d_instantiate(entry, inode);
 }
@@ -1029,7 +1040,7 @@
 	unsigned int hash = entry->d_name.hash;
 
 	if (!inode) {
-		entry->d_inode = NULL;
+		__d_instantiate(entry, NULL);
 		return NULL;
 	}
 
@@ -1048,9 +1059,7 @@
 		return alias;
 	}
 
-	list_add(&entry->d_alias, &inode->i_dentry);
-	entry->d_inode = inode;
-	fsnotify_d_instantiate(entry, inode);
+	__d_instantiate(entry, inode);
 	return NULL;
 }
 
@@ -1111,69 +1120,71 @@
 }
 
 /**
- * d_alloc_anon - allocate an anonymous dentry
+ * d_obtain_alias - find or allocate a dentry for a given inode
  * @inode: inode to allocate the dentry for
  *
- * This is similar to d_alloc_root.  It is used by filesystems when
- * creating a dentry for a given inode, often in the process of 
- * mapping a filehandle to a dentry.  The returned dentry may be
- * anonymous, or may have a full name (if the inode was already
- * in the cache).  The file system may need to make further
- * efforts to connect this dentry into the dcache properly.
+ * Obtain a dentry for an inode resulting from NFS filehandle conversion or
+ * similar open by handle operations.  The returned dentry may be anonymous,
+ * or may have a full name (if the inode was already in the cache).
  *
- * When called on a directory inode, we must ensure that
- * the inode only ever has one dentry.  If a dentry is
- * found, that is returned instead of allocating a new one.
+ * When called on a directory inode, we must ensure that the inode only ever
+ * has one dentry.  If a dentry is found, that is returned instead of
+ * allocating a new one.
  *
  * On successful return, the reference to the inode has been transferred
- * to the dentry.  If %NULL is returned (indicating kmalloc failure),
- * the reference on the inode has not been released.
+ * to the dentry.  In case of an error the reference on the inode is released.
+ * To make it easier to use in export operations a %NULL or IS_ERR inode may
+ * be passed in and will be the error will be propagate to the return value,
+ * with a %NULL @inode replaced by ERR_PTR(-ESTALE).
  */
-
-struct dentry * d_alloc_anon(struct inode *inode)
+struct dentry *d_obtain_alias(struct inode *inode)
 {
 	static const struct qstr anonstring = { .name = "" };
 	struct dentry *tmp;
 	struct dentry *res;
 
-	if ((res = d_find_alias(inode))) {
-		iput(inode);
-		return res;
-	}
+	if (!inode)
+		return ERR_PTR(-ESTALE);
+	if (IS_ERR(inode))
+		return ERR_CAST(inode);
+
+	res = d_find_alias(inode);
+	if (res)
+		goto out_iput;
 
 	tmp = d_alloc(NULL, &anonstring);
-	if (!tmp)
-		return NULL;
-
+	if (!tmp) {
+		res = ERR_PTR(-ENOMEM);
+		goto out_iput;
+	}
 	tmp->d_parent = tmp; /* make sure dput doesn't croak */
-	
+
 	spin_lock(&dcache_lock);
 	res = __d_find_alias(inode, 0);
-	if (!res) {
-		/* attach a disconnected dentry */
-		res = tmp;
-		tmp = NULL;
-		spin_lock(&res->d_lock);
-		res->d_sb = inode->i_sb;
-		res->d_parent = res;
-		res->d_inode = inode;
-		res->d_flags |= DCACHE_DISCONNECTED;
-		res->d_flags &= ~DCACHE_UNHASHED;
-		list_add(&res->d_alias, &inode->i_dentry);
-		hlist_add_head(&res->d_hash, &inode->i_sb->s_anon);
-		spin_unlock(&res->d_lock);
-
-		inode = NULL; /* don't drop reference */
-	}
-	spin_unlock(&dcache_lock);
-
-	if (inode)
-		iput(inode);
-	if (tmp)
+	if (res) {
+		spin_unlock(&dcache_lock);
 		dput(tmp);
+		goto out_iput;
+	}
+
+	/* attach a disconnected dentry */
+	spin_lock(&tmp->d_lock);
+	tmp->d_sb = inode->i_sb;
+	tmp->d_inode = inode;
+	tmp->d_flags |= DCACHE_DISCONNECTED;
+	tmp->d_flags &= ~DCACHE_UNHASHED;
+	list_add(&tmp->d_alias, &inode->i_dentry);
+	hlist_add_head(&tmp->d_hash, &inode->i_sb->s_anon);
+	spin_unlock(&tmp->d_lock);
+
+	spin_unlock(&dcache_lock);
+	return tmp;
+
+ out_iput:
+	iput(inode);
 	return res;
 }
-
+EXPORT_SYMBOL_GPL(d_obtain_alias);
 
 /**
  * d_splice_alias - splice a disconnected dentry into the tree if one exists
@@ -1200,17 +1211,14 @@
 		new = __d_find_alias(inode, 1);
 		if (new) {
 			BUG_ON(!(new->d_flags & DCACHE_DISCONNECTED));
-			fsnotify_d_instantiate(new, inode);
 			spin_unlock(&dcache_lock);
 			security_d_instantiate(new, inode);
 			d_rehash(dentry);
 			d_move(new, dentry);
 			iput(inode);
 		} else {
-			/* d_instantiate takes dcache_lock, so we do it by hand */
-			list_add(&dentry->d_alias, &inode->i_dentry);
-			dentry->d_inode = inode;
-			fsnotify_d_instantiate(dentry, inode);
+			/* already taking dcache_lock, so d_add() by hand */
+			__d_instantiate(dentry, inode);
 			spin_unlock(&dcache_lock);
 			security_d_instantiate(dentry, inode);
 			d_rehash(dentry);
@@ -1293,8 +1301,7 @@
 		 * d_instantiate() by hand because it takes dcache_lock which
 		 * we already hold.
 		 */
-		list_add(&found->d_alias, &inode->i_dentry);
-		found->d_inode = inode;
+		__d_instantiate(found, inode);
 		spin_unlock(&dcache_lock);
 		security_d_instantiate(found, inode);
 		return found;
@@ -1456,8 +1463,6 @@
  * d_validate - verify dentry provided from insecure source
  * @dentry: The dentry alleged to be valid child of @dparent
  * @dparent: The parent dentry (known to be valid)
- * @hash: Hash of the dentry
- * @len: Length of the name
  *
  * An insecure source has sent us a dentry, here we verify it and dget() it.
  * This is used by ncpfs in its readdir implementation.
@@ -1714,18 +1719,23 @@
 	spin_unlock(&dcache_lock);
 }
 
-/*
- * Helper that returns 1 if p1 is a parent of p2, else 0
+/**
+ * d_ancestor - search for an ancestor
+ * @p1: ancestor dentry
+ * @p2: child dentry
+ *
+ * Returns the ancestor dentry of p2 which is a child of p1, if p1 is
+ * an ancestor of p2, else NULL.
  */
-static int d_isparent(struct dentry *p1, struct dentry *p2)
+struct dentry *d_ancestor(struct dentry *p1, struct dentry *p2)
 {
 	struct dentry *p;
 
-	for (p = p2; p->d_parent != p; p = p->d_parent) {
+	for (p = p2; !IS_ROOT(p); p = p->d_parent) {
 		if (p->d_parent == p1)
-			return 1;
+			return p;
 	}
-	return 0;
+	return NULL;
 }
 
 /*
@@ -1749,7 +1759,7 @@
 
 	/* Check for loops */
 	ret = ERR_PTR(-ELOOP);
-	if (d_isparent(alias, dentry))
+	if (d_ancestor(alias, dentry))
 		goto out_err;
 
 	/* See lock_rename() */
@@ -1822,7 +1832,7 @@
 
 	if (!inode) {
 		actual = dentry;
-		dentry->d_inode = NULL;
+		__d_instantiate(dentry, NULL);
 		goto found_lock;
 	}
 
@@ -2149,32 +2159,27 @@
  * Caller must ensure that "new_dentry" is pinned before calling is_subdir()
  */
   
-int is_subdir(struct dentry * new_dentry, struct dentry * old_dentry)
+int is_subdir(struct dentry *new_dentry, struct dentry *old_dentry)
 {
 	int result;
-	struct dentry * saved = new_dentry;
 	unsigned long seq;
 
-	/* need rcu_readlock to protect against the d_parent trashing due to
-	 * d_move
+	/* FIXME: This is old behavior, needed? Please check callers. */
+	if (new_dentry == old_dentry)
+		return 1;
+
+	/*
+	 * Need rcu_readlock to protect against the d_parent trashing
+	 * due to d_move
 	 */
 	rcu_read_lock();
-        do {
+	do {
 		/* for restarting inner loop in case of seq retry */
-		new_dentry = saved;
-		result = 0;
 		seq = read_seqbegin(&rename_lock);
-		for (;;) {
-			if (new_dentry != old_dentry) {
-				struct dentry * parent = new_dentry->d_parent;
-				if (parent == new_dentry)
-					break;
-				new_dentry = parent;
-				continue;
-			}
+		if (d_ancestor(old_dentry, new_dentry))
 			result = 1;
-			break;
-		}
+		else
+			result = 0;
 	} while (read_seqretry(&rename_lock, seq));
 	rcu_read_unlock();
 
@@ -2344,7 +2349,6 @@
 }
 
 EXPORT_SYMBOL(d_alloc);
-EXPORT_SYMBOL(d_alloc_anon);
 EXPORT_SYMBOL(d_alloc_root);
 EXPORT_SYMBOL(d_delete);
 EXPORT_SYMBOL(d_find_alias);
diff --git a/fs/dquot.c b/fs/dquot.c
index da30a27..5e95261 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -1805,19 +1805,19 @@
 }
 
 /* Actual function called from quotactl() */
-int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path,
+int vfs_quota_on(struct super_block *sb, int type, int format_id, char *name,
 		 int remount)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
 	if (remount)
 		return vfs_quota_on_remount(sb, type);
 
-	error = path_lookup(path, LOOKUP_FOLLOW, &nd);
+	error = kern_path(name, LOOKUP_FOLLOW, &path);
 	if (!error) {
-		error = vfs_quota_on_path(sb, type, format_id, &nd.path);
-		path_put(&nd.path);
+		error = vfs_quota_on_path(sb, type, format_id, &path);
+		path_put(&path);
 	}
 	return error;
 }
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 046e027..64d2ba9 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -471,31 +471,26 @@
  */
 static int ecryptfs_read_super(struct super_block *sb, const char *dev_name)
 {
+	struct path path;
 	int rc;
-	struct nameidata nd;
-	struct dentry *lower_root;
-	struct vfsmount *lower_mnt;
 
-	memset(&nd, 0, sizeof(struct nameidata));
-	rc = path_lookup(dev_name, LOOKUP_FOLLOW | LOOKUP_DIRECTORY, &nd);
+	rc = kern_path(dev_name, LOOKUP_FOLLOW | LOOKUP_DIRECTORY, &path);
 	if (rc) {
 		ecryptfs_printk(KERN_WARNING, "path_lookup() failed\n");
 		goto out;
 	}
-	lower_root = nd.path.dentry;
-	lower_mnt = nd.path.mnt;
-	ecryptfs_set_superblock_lower(sb, lower_root->d_sb);
-	sb->s_maxbytes = lower_root->d_sb->s_maxbytes;
-	sb->s_blocksize = lower_root->d_sb->s_blocksize;
-	ecryptfs_set_dentry_lower(sb->s_root, lower_root);
-	ecryptfs_set_dentry_lower_mnt(sb->s_root, lower_mnt);
-	rc = ecryptfs_interpose(lower_root, sb->s_root, sb, 0);
+	ecryptfs_set_superblock_lower(sb, path.dentry->d_sb);
+	sb->s_maxbytes = path.dentry->d_sb->s_maxbytes;
+	sb->s_blocksize = path.dentry->d_sb->s_blocksize;
+	ecryptfs_set_dentry_lower(sb->s_root, path.dentry);
+	ecryptfs_set_dentry_lower_mnt(sb->s_root, path.mnt);
+	rc = ecryptfs_interpose(path.dentry, sb->s_root, sb, 0);
 	if (rc)
 		goto out_free;
 	rc = 0;
 	goto out;
 out_free:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return rc;
 }
diff --git a/fs/efs/namei.c b/fs/efs/namei.c
index 291abb1..c3fb5f9 100644
--- a/fs/efs/namei.c
+++ b/fs/efs/namei.c
@@ -112,35 +112,14 @@
 
 struct dentry *efs_get_parent(struct dentry *child)
 {
-	struct dentry *parent;
-	struct inode *inode;
+	struct dentry *parent = ERR_PTR(-ENOENT);
 	efs_ino_t ino;
-	long error;
 
 	lock_kernel();
-
-	error = -ENOENT;
 	ino = efs_find_entry(child->d_inode, "..", 2);
-	if (!ino)
-		goto fail;
-
-	inode = efs_iget(child->d_inode->i_sb, ino);
-	if (IS_ERR(inode)) {
-		error = PTR_ERR(inode);
-		goto fail;
-	}
-
-	error = -ENOMEM;
-	parent = d_alloc_anon(inode);
-	if (!parent)
-		goto fail_iput;
-
+	if (ino)
+		parent = d_obtain_alias(efs_iget(child->d_inode->i_sb, ino));
 	unlock_kernel();
+
 	return parent;
-
- fail_iput:
-	iput(inode);
- fail:
-	unlock_kernel();
-	return ERR_PTR(error);
 }
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 99368bd..aec5c13f 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -930,8 +930,15 @@
 	 * inside the main ready-list here.
 	 */
 	for (nepi = ep->ovflist; (epi = nepi) != NULL;
-	     nepi = epi->next, epi->next = EP_UNACTIVE_PTR)
-		list_add_tail(&epi->rdllink, &ep->rdllist);
+	     nepi = epi->next, epi->next = EP_UNACTIVE_PTR) {
+		/*
+		 * If the above loop quit with errors, the epoll item might still
+		 * be linked to "txlist", and the list_splice() done below will
+		 * take care of those cases.
+		 */
+		if (!ep_is_linked(&epi->rdllink))
+			list_add_tail(&epi->rdllink, &ep->rdllist);
+	}
 	/*
 	 * We need to set back ep->ovflist to EP_UNACTIVE_PTR, so that after
 	 * releasing the lock, events will be queued in the normal way inside
diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c
index cc91227..80246ba 100644
--- a/fs/exportfs/expfs.c
+++ b/fs/exportfs/expfs.c
@@ -94,9 +94,8 @@
  * It may already be, as the flag isn't always updated when connection happens.
  */
 static int
-reconnect_path(struct vfsmount *mnt, struct dentry *target_dir)
+reconnect_path(struct vfsmount *mnt, struct dentry *target_dir, char *nbuf)
 {
-	char nbuf[NAME_MAX+1];
 	int noprogress = 0;
 	int err = -ESTALE;
 
@@ -281,13 +280,14 @@
 		int old_seq = buffer.sequence;
 
 		error = vfs_readdir(file, filldir_one, &buffer);
+		if (buffer.found) {
+			error = 0;
+			break;
+		}
 
 		if (error < 0)
 			break;
 
-		error = 0;
-		if (buffer.found)
-			break;
 		error = -ENOENT;
 		if (old_seq == buffer.sequence)
 			break;
@@ -360,14 +360,13 @@
 {
 	const struct export_operations *nop = mnt->mnt_sb->s_export_op;
 	struct dentry *result, *alias;
+	char nbuf[NAME_MAX+1];
 	int err;
 
 	/*
 	 * Try to get any dentry for the given file handle from the filesystem.
 	 */
 	result = nop->fh_to_dentry(mnt->mnt_sb, fid, fh_len, fileid_type);
-	if (!result)
-		result = ERR_PTR(-ESTALE);
 	if (IS_ERR(result))
 		return result;
 
@@ -381,7 +380,7 @@
 		 * filesystem root.
 		 */
 		if (result->d_flags & DCACHE_DISCONNECTED) {
-			err = reconnect_path(mnt, result);
+			err = reconnect_path(mnt, result, nbuf);
 			if (err)
 				goto err_result;
 		}
@@ -397,7 +396,6 @@
 		 * It's not a directory.  Life is a little more complicated.
 		 */
 		struct dentry *target_dir, *nresult;
-		char nbuf[NAME_MAX+1];
 
 		/*
 		 * See if either the dentry we just got from the filesystem
@@ -422,8 +420,6 @@
 
 		target_dir = nop->fh_to_parent(mnt->mnt_sb, fid,
 				fh_len, fileid_type);
-		if (!target_dir)
-			goto err_result;
 		err = PTR_ERR(target_dir);
 		if (IS_ERR(target_dir))
 			goto err_result;
@@ -433,7 +429,7 @@
 		 * connected to the filesystem root.  The VFS really doesn't
 		 * like disconnected directories..
 		 */
-		err = reconnect_path(mnt, target_dir);
+		err = reconnect_path(mnt, target_dir, nbuf);
 		if (err) {
 			dput(target_dir);
 			goto err_result;
diff --git a/fs/ext2/dir.c b/fs/ext2/dir.c
index 11a49ce..9a0fc40 100644
--- a/fs/ext2/dir.c
+++ b/fs/ext2/dir.c
@@ -354,11 +354,11 @@
  * (as a parameter - res_dir). Page is returned mapped and unlocked.
  * Entry is guaranteed to be valid.
  */
-struct ext2_dir_entry_2 * ext2_find_entry (struct inode * dir,
-			struct dentry *dentry, struct page ** res_page)
+struct ext2_dir_entry_2 *ext2_find_entry (struct inode * dir,
+			struct qstr *child, struct page ** res_page)
 {
-	const char *name = dentry->d_name.name;
-	int namelen = dentry->d_name.len;
+	const char *name = child->name;
+	int namelen = child->len;
 	unsigned reclen = EXT2_DIR_REC_LEN(namelen);
 	unsigned long start, n;
 	unsigned long npages = dir_pages(dir);
@@ -431,13 +431,13 @@
 	return de;
 }
 
-ino_t ext2_inode_by_name(struct inode * dir, struct dentry *dentry)
+ino_t ext2_inode_by_name(struct inode *dir, struct qstr *child)
 {
 	ino_t res = 0;
-	struct ext2_dir_entry_2 * de;
+	struct ext2_dir_entry_2 *de;
 	struct page *page;
 	
-	de = ext2_find_entry (dir, dentry, &page);
+	de = ext2_find_entry (dir, child, &page);
 	if (de) {
 		res = le32_to_cpu(de->inode);
 		ext2_put_page(page);
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index bae998c..3203042 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -105,9 +105,9 @@
 
 /* dir.c */
 extern int ext2_add_link (struct dentry *, struct inode *);
-extern ino_t ext2_inode_by_name(struct inode *, struct dentry *);
+extern ino_t ext2_inode_by_name(struct inode *, struct qstr *);
 extern int ext2_make_empty(struct inode *, struct inode *);
-extern struct ext2_dir_entry_2 * ext2_find_entry (struct inode *,struct dentry *, struct page **);
+extern struct ext2_dir_entry_2 * ext2_find_entry (struct inode *,struct qstr *, struct page **);
 extern int ext2_delete_entry (struct ext2_dir_entry_2 *, struct page *);
 extern int ext2_empty_dir (struct inode *);
 extern struct ext2_dir_entry_2 * ext2_dotdot (struct inode *, struct page **);
diff --git a/fs/ext2/namei.c b/fs/ext2/namei.c
index 80c97fd..2a74725 100644
--- a/fs/ext2/namei.c
+++ b/fs/ext2/namei.c
@@ -60,7 +60,7 @@
 	if (dentry->d_name.len > EXT2_NAME_LEN)
 		return ERR_PTR(-ENAMETOOLONG);
 
-	ino = ext2_inode_by_name(dir, dentry);
+	ino = ext2_inode_by_name(dir, &dentry->d_name);
 	inode = NULL;
 	if (ino) {
 		inode = ext2_iget(dir->i_sb, ino);
@@ -72,27 +72,11 @@
 
 struct dentry *ext2_get_parent(struct dentry *child)
 {
-	unsigned long ino;
-	struct dentry *parent;
-	struct inode *inode;
-	struct dentry dotdot;
-
-	dotdot.d_name.name = "..";
-	dotdot.d_name.len = 2;
-
-	ino = ext2_inode_by_name(child->d_inode, &dotdot);
+	struct qstr dotdot = {.name = "..", .len = 2};
+	unsigned long ino = ext2_inode_by_name(child->d_inode, &dotdot);
 	if (!ino)
 		return ERR_PTR(-ENOENT);
-	inode = ext2_iget(child->d_inode->i_sb, ino);
-
-	if (IS_ERR(inode))
-		return ERR_CAST(inode);
-	parent = d_alloc_anon(inode);
-	if (!parent) {
-		iput(inode);
-		parent = ERR_PTR(-ENOMEM);
-	}
-	return parent;
+	return d_obtain_alias(ext2_iget(child->d_inode->i_sb, ino));
 } 
 
 /*
@@ -257,7 +241,7 @@
 	struct page * page;
 	int err = -ENOENT;
 
-	de = ext2_find_entry (dir, dentry, &page);
+	de = ext2_find_entry (dir, &dentry->d_name, &page);
 	if (!de)
 		goto out;
 
@@ -299,7 +283,7 @@
 	struct ext2_dir_entry_2 * old_de;
 	int err = -ENOENT;
 
-	old_de = ext2_find_entry (old_dir, old_dentry, &old_page);
+	old_de = ext2_find_entry (old_dir, &old_dentry->d_name, &old_page);
 	if (!old_de)
 		goto out;
 
@@ -319,7 +303,7 @@
 			goto out_dir;
 
 		err = -ENOENT;
-		new_de = ext2_find_entry (new_dir, new_dentry, &new_page);
+		new_de = ext2_find_entry (new_dir, &new_dentry->d_name, &new_page);
 		if (!new_de)
 			goto out_dir;
 		inode_inc_link_count(old_inode);
diff --git a/fs/ext2/xip.c b/fs/ext2/xip.c
index 4fb94c2..b72b858 100644
--- a/fs/ext2/xip.c
+++ b/fs/ext2/xip.c
@@ -11,6 +11,7 @@
 #include <linux/buffer_head.h>
 #include <linux/ext2_fs_sb.h>
 #include <linux/ext2_fs.h>
+#include <linux/blkdev.h>
 #include "ext2.h"
 #include "xip.h"
 
diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c
index 4c82531..5853f44 100644
--- a/fs/ext3/dir.c
+++ b/fs/ext3/dir.c
@@ -456,17 +456,8 @@
 	if (info->extra_fname) {
 		if (call_filldir(filp, dirent, filldir, info->extra_fname))
 			goto finished;
-
 		info->extra_fname = NULL;
-		info->curr_node = rb_next(info->curr_node);
-		if (!info->curr_node) {
-			if (info->next_hash == ~0) {
-				filp->f_pos = EXT3_HTREE_EOF;
-				goto finished;
-			}
-			info->curr_hash = info->next_hash;
-			info->curr_minor_hash = 0;
-		}
+		goto next_node;
 	} else if (!info->curr_node)
 		info->curr_node = rb_first(&info->root);
 
@@ -498,9 +489,14 @@
 		info->curr_minor_hash = fname->minor_hash;
 		if (call_filldir(filp, dirent, filldir, fname))
 			break;
-
+	next_node:
 		info->curr_node = rb_next(info->curr_node);
-		if (!info->curr_node) {
+		if (info->curr_node) {
+			fname = rb_entry(info->curr_node, struct fname,
+					 rb_hash);
+			info->curr_hash = fname->hash;
+			info->curr_minor_hash = fname->minor_hash;
+		} else {
 			if (info->next_hash == ~0) {
 				filp->f_pos = EXT3_HTREE_EOF;
 				break;
diff --git a/fs/ext3/ioctl.c b/fs/ext3/ioctl.c
index 0d0c701..b7394d0 100644
--- a/fs/ext3/ioctl.c
+++ b/fs/ext3/ioctl.c
@@ -239,7 +239,7 @@
 	case EXT3_IOC_GROUP_EXTEND: {
 		ext3_fsblk_t n_blocks_count;
 		struct super_block *sb = inode->i_sb;
-		int err;
+		int err, err2;
 
 		if (!capable(CAP_SYS_RESOURCE))
 			return -EPERM;
@@ -254,8 +254,10 @@
 		}
 		err = ext3_group_extend(sb, EXT3_SB(sb)->s_es, n_blocks_count);
 		journal_lock_updates(EXT3_SB(sb)->s_journal);
-		journal_flush(EXT3_SB(sb)->s_journal);
+		err2 = journal_flush(EXT3_SB(sb)->s_journal);
 		journal_unlock_updates(EXT3_SB(sb)->s_journal);
+		if (err == 0)
+			err = err2;
 group_extend_out:
 		mnt_drop_write(filp->f_path.mnt);
 		return err;
@@ -263,7 +265,7 @@
 	case EXT3_IOC_GROUP_ADD: {
 		struct ext3_new_group_data input;
 		struct super_block *sb = inode->i_sb;
-		int err;
+		int err, err2;
 
 		if (!capable(CAP_SYS_RESOURCE))
 			return -EPERM;
@@ -280,8 +282,10 @@
 
 		err = ext3_group_add(sb, &input);
 		journal_lock_updates(EXT3_SB(sb)->s_journal);
-		journal_flush(EXT3_SB(sb)->s_journal);
+		err2 = journal_flush(EXT3_SB(sb)->s_journal);
 		journal_unlock_updates(EXT3_SB(sb)->s_journal);
+		if (err == 0)
+			err = err2;
 group_add_out:
 		mnt_drop_write(filp->f_path.mnt);
 		return err;
diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index de13e91..3e5edc9 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -159,7 +159,7 @@
 static void dx_set_limit (struct dx_entry *entries, unsigned value);
 static unsigned dx_root_limit (struct inode *dir, unsigned infosize);
 static unsigned dx_node_limit (struct inode *dir);
-static struct dx_frame *dx_probe(struct dentry *dentry,
+static struct dx_frame *dx_probe(struct qstr *entry,
 				 struct inode *dir,
 				 struct dx_hash_info *hinfo,
 				 struct dx_frame *frame,
@@ -176,8 +176,9 @@
 				 struct dx_frame *frame,
 				 struct dx_frame *frames,
 				 __u32 *start_hash);
-static struct buffer_head * ext3_dx_find_entry(struct dentry *dentry,
-		       struct ext3_dir_entry_2 **res_dir, int *err);
+static struct buffer_head * ext3_dx_find_entry(struct inode *dir,
+			struct qstr *entry, struct ext3_dir_entry_2 **res_dir,
+			int *err);
 static int ext3_dx_add_entry(handle_t *handle, struct dentry *dentry,
 			     struct inode *inode);
 
@@ -342,7 +343,7 @@
  * back to userspace.
  */
 static struct dx_frame *
-dx_probe(struct dentry *dentry, struct inode *dir,
+dx_probe(struct qstr *entry, struct inode *dir,
 	 struct dx_hash_info *hinfo, struct dx_frame *frame_in, int *err)
 {
 	unsigned count, indirect;
@@ -353,8 +354,6 @@
 	u32 hash;
 
 	frame->bh = NULL;
-	if (dentry)
-		dir = dentry->d_parent->d_inode;
 	if (!(bh = ext3_bread (NULL,dir, 0, 0, err)))
 		goto fail;
 	root = (struct dx_root *) bh->b_data;
@@ -370,8 +369,8 @@
 	}
 	hinfo->hash_version = root->info.hash_version;
 	hinfo->seed = EXT3_SB(dir->i_sb)->s_hash_seed;
-	if (dentry)
-		ext3fs_dirhash(dentry->d_name.name, dentry->d_name.len, hinfo);
+	if (entry)
+		ext3fs_dirhash(entry->name, entry->len, hinfo);
 	hash = hinfo->hash;
 
 	if (root->info.unused_flags & 1) {
@@ -803,15 +802,15 @@
  */
 static inline int search_dirblock(struct buffer_head * bh,
 				  struct inode *dir,
-				  struct dentry *dentry,
+				  struct qstr *child,
 				  unsigned long offset,
 				  struct ext3_dir_entry_2 ** res_dir)
 {
 	struct ext3_dir_entry_2 * de;
 	char * dlimit;
 	int de_len;
-	const char *name = dentry->d_name.name;
-	int namelen = dentry->d_name.len;
+	const char *name = child->name;
+	int namelen = child->len;
 
 	de = (struct ext3_dir_entry_2 *) bh->b_data;
 	dlimit = bh->b_data + dir->i_sb->s_blocksize;
@@ -850,8 +849,9 @@
  * The returned buffer_head has ->b_count elevated.  The caller is expected
  * to brelse() it when appropriate.
  */
-static struct buffer_head * ext3_find_entry (struct dentry *dentry,
-					struct ext3_dir_entry_2 ** res_dir)
+static struct buffer_head *ext3_find_entry(struct inode *dir,
+					struct qstr *entry,
+					struct ext3_dir_entry_2 **res_dir)
 {
 	struct super_block * sb;
 	struct buffer_head * bh_use[NAMEI_RA_SIZE];
@@ -863,16 +863,15 @@
 				   buffer */
 	int num = 0;
 	int nblocks, i, err;
-	struct inode *dir = dentry->d_parent->d_inode;
 	int namelen;
 
 	*res_dir = NULL;
 	sb = dir->i_sb;
-	namelen = dentry->d_name.len;
+	namelen = entry->len;
 	if (namelen > EXT3_NAME_LEN)
 		return NULL;
 	if (is_dx(dir)) {
-		bh = ext3_dx_find_entry(dentry, res_dir, &err);
+		bh = ext3_dx_find_entry(dir, entry, res_dir, &err);
 		/*
 		 * On success, or if the error was file not found,
 		 * return.  Otherwise, fall back to doing a search the
@@ -923,7 +922,7 @@
 			brelse(bh);
 			goto next;
 		}
-		i = search_dirblock(bh, dir, dentry,
+		i = search_dirblock(bh, dir, entry,
 			    block << EXT3_BLOCK_SIZE_BITS(sb), res_dir);
 		if (i == 1) {
 			EXT3_I(dir)->i_dir_start_lookup = block;
@@ -957,8 +956,9 @@
 	return ret;
 }
 
-static struct buffer_head * ext3_dx_find_entry(struct dentry *dentry,
-		       struct ext3_dir_entry_2 **res_dir, int *err)
+static struct buffer_head * ext3_dx_find_entry(struct inode *dir,
+			struct qstr *entry, struct ext3_dir_entry_2 **res_dir,
+			int *err)
 {
 	struct super_block * sb;
 	struct dx_hash_info	hinfo;
@@ -968,14 +968,13 @@
 	struct buffer_head *bh;
 	unsigned long block;
 	int retval;
-	int namelen = dentry->d_name.len;
-	const u8 *name = dentry->d_name.name;
-	struct inode *dir = dentry->d_parent->d_inode;
+	int namelen = entry->len;
+	const u8 *name = entry->name;
 
 	sb = dir->i_sb;
 	/* NFS may look up ".." - look at dx_root directory block */
-	if (namelen > 2 || name[0] != '.'||(name[1] != '.' && name[1] != '\0')){
-		if (!(frame = dx_probe(dentry, NULL, &hinfo, frames, err)))
+	if (namelen > 2 || name[0] != '.'|| (namelen == 2 && name[1] != '.')) {
+		if (!(frame = dx_probe(entry, dir, &hinfo, frames, err)))
 			return NULL;
 	} else {
 		frame = frames;
@@ -1036,7 +1035,7 @@
 	if (dentry->d_name.len > EXT3_NAME_LEN)
 		return ERR_PTR(-ENAMETOOLONG);
 
-	bh = ext3_find_entry(dentry, &de);
+	bh = ext3_find_entry(dir, &dentry->d_name, &de);
 	inode = NULL;
 	if (bh) {
 		unsigned long ino = le32_to_cpu(de->inode);
@@ -1057,18 +1056,11 @@
 struct dentry *ext3_get_parent(struct dentry *child)
 {
 	unsigned long ino;
-	struct dentry *parent;
-	struct inode *inode;
-	struct dentry dotdot;
+	struct qstr dotdot = {.name = "..", .len = 2};
 	struct ext3_dir_entry_2 * de;
 	struct buffer_head *bh;
 
-	dotdot.d_name.name = "..";
-	dotdot.d_name.len = 2;
-	dotdot.d_parent = child; /* confusing, isn't it! */
-
-	bh = ext3_find_entry(&dotdot, &de);
-	inode = NULL;
+	bh = ext3_find_entry(child->d_inode, &dotdot, &de);
 	if (!bh)
 		return ERR_PTR(-ENOENT);
 	ino = le32_to_cpu(de->inode);
@@ -1080,16 +1072,7 @@
 		return ERR_PTR(-EIO);
 	}
 
-	inode = ext3_iget(child->d_inode->i_sb, ino);
-	if (IS_ERR(inode))
-		return ERR_CAST(inode);
-
-	parent = d_alloc_anon(inode);
-	if (!parent) {
-		iput(inode);
-		parent = ERR_PTR(-ENOMEM);
-	}
-	return parent;
+	return d_obtain_alias(ext3_iget(child->d_inode->i_sb, ino));
 }
 
 #define S_SHIFT 12
@@ -1503,7 +1486,7 @@
 	struct ext3_dir_entry_2 *de;
 	int err;
 
-	frame = dx_probe(dentry, NULL, &hinfo, frames, &err);
+	frame = dx_probe(&dentry->d_name, dir, &hinfo, frames, &err);
 	if (!frame)
 		return err;
 	entries = frame->entries;
@@ -2056,7 +2039,7 @@
 		return PTR_ERR(handle);
 
 	retval = -ENOENT;
-	bh = ext3_find_entry (dentry, &de);
+	bh = ext3_find_entry(dir, &dentry->d_name, &de);
 	if (!bh)
 		goto end_rmdir;
 
@@ -2118,7 +2101,7 @@
 		handle->h_sync = 1;
 
 	retval = -ENOENT;
-	bh = ext3_find_entry (dentry, &de);
+	bh = ext3_find_entry(dir, &dentry->d_name, &de);
 	if (!bh)
 		goto end_unlink;
 
@@ -2276,7 +2259,7 @@
 	if (IS_DIRSYNC(old_dir) || IS_DIRSYNC(new_dir))
 		handle->h_sync = 1;
 
-	old_bh = ext3_find_entry (old_dentry, &old_de);
+	old_bh = ext3_find_entry(old_dir, &old_dentry->d_name, &old_de);
 	/*
 	 *  Check for inode number is _not_ due to possible IO errors.
 	 *  We might rmdir the source, keep it as pwd of some process
@@ -2289,7 +2272,7 @@
 		goto end_rename;
 
 	new_inode = new_dentry->d_inode;
-	new_bh = ext3_find_entry (new_dentry, &new_de);
+	new_bh = ext3_find_entry(new_dir, &new_dentry->d_name, &new_de);
 	if (new_bh) {
 		if (!new_inode) {
 			brelse (new_bh);
@@ -2355,7 +2338,8 @@
 		struct buffer_head *old_bh2;
 		struct ext3_dir_entry_2 *old_de2;
 
-		old_bh2 = ext3_find_entry(old_dentry, &old_de2);
+		old_bh2 = ext3_find_entry(old_dir, &old_dentry->d_name,
+					  &old_de2);
 		if (old_bh2) {
 			retval = ext3_delete_entry(handle, old_dir,
 						   old_de2, old_bh2);
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 3a260af..18eaa78 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -347,7 +347,7 @@
 static int ext3_blkdev_put(struct block_device *bdev)
 {
 	bd_release(bdev);
-	return blkdev_put(bdev);
+	return blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
 }
 
 static int ext3_blkdev_remove(struct ext3_sb_info *sbi)
@@ -393,7 +393,8 @@
 	int i;
 
 	ext3_xattr_put_super(sb);
-	journal_destroy(sbi->s_journal);
+	if (journal_destroy(sbi->s_journal) < 0)
+		ext3_abort(sb, __func__, "Couldn't clean up the journal");
 	if (!(sb->s_flags & MS_RDONLY)) {
 		EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
 		es->s_state = cpu_to_le16(sbi->s_mount_state);
@@ -2066,7 +2067,7 @@
 	if (bd_claim(bdev, sb)) {
 		printk(KERN_ERR
 		        "EXT3: failed to claim external journal device.\n");
-		blkdev_put(bdev);
+		blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
 		return NULL;
 	}
 
@@ -2296,7 +2297,9 @@
 	journal_t *journal = EXT3_SB(sb)->s_journal;
 
 	journal_lock_updates(journal);
-	journal_flush(journal);
+	if (journal_flush(journal) < 0)
+		goto out;
+
 	lock_super(sb);
 	if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER) &&
 	    sb->s_flags & MS_RDONLY) {
@@ -2305,6 +2308,8 @@
 		ext3_commit_super(sb, es, 1);
 	}
 	unlock_super(sb);
+
+out:
 	journal_unlock_updates(journal);
 }
 
@@ -2404,7 +2409,13 @@
 
 		/* Now we set up the journal barrier. */
 		journal_lock_updates(journal);
-		journal_flush(journal);
+
+		/*
+		 * We don't want to clear needs_recovery flag when we failed
+		 * to flush the journal.
+		 */
+		if (journal_flush(journal) < 0)
+			return;
 
 		/* Journal blocked and flushed, clear needs_recovery flag. */
 		EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
@@ -2783,30 +2794,30 @@
  * Standard function to be called on quota_on
  */
 static int ext3_quota_on(struct super_block *sb, int type, int format_id,
-			 char *path, int remount)
+			 char *name, int remount)
 {
 	int err;
-	struct nameidata nd;
+	struct path path;
 
 	if (!test_opt(sb, QUOTA))
 		return -EINVAL;
-	/* When remounting, no checks are needed and in fact, path is NULL */
+	/* When remounting, no checks are needed and in fact, name is NULL */
 	if (remount)
-		return vfs_quota_on(sb, type, format_id, path, remount);
+		return vfs_quota_on(sb, type, format_id, name, remount);
 
-	err = path_lookup(path, LOOKUP_FOLLOW, &nd);
+	err = kern_path(name, LOOKUP_FOLLOW, &path);
 	if (err)
 		return err;
 
 	/* Quotafile not on the same filesystem? */
-	if (nd.path.mnt->mnt_sb != sb) {
-		path_put(&nd.path);
+	if (path.mnt->mnt_sb != sb) {
+		path_put(&path);
 		return -EXDEV;
 	}
 	/* Journaling quota? */
 	if (EXT3_SB(sb)->s_qf_names[type]) {
 		/* Quotafile not of fs root? */
-		if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
+		if (path.dentry->d_parent != sb->s_root)
 			printk(KERN_WARNING
 				"EXT3-fs: Quota file not on filesystem root. "
 				"Journaled quota will not work.\n");
@@ -2816,18 +2827,22 @@
 	 * When we journal data on quota file, we have to flush journal to see
 	 * all updates to the file when we bypass pagecache...
 	 */
-	if (ext3_should_journal_data(nd.path.dentry->d_inode)) {
+	if (ext3_should_journal_data(path.dentry->d_inode)) {
 		/*
 		 * We don't need to lock updates but journal_flush() could
 		 * otherwise be livelocked...
 		 */
 		journal_lock_updates(EXT3_SB(sb)->s_journal);
-		journal_flush(EXT3_SB(sb)->s_journal);
+		err = journal_flush(EXT3_SB(sb)->s_journal);
 		journal_unlock_updates(EXT3_SB(sb)->s_journal);
+		if (err) {
+			path_put(&path);
+			return err;
+		}
 	}
 
-	err = vfs_quota_on_path(sb, type, format_id, &nd.path);
-	path_put(&nd.path);
+	err = vfs_quota_on_path(sb, type, format_id, &path);
+	path_put(&path);
 	return err;
 }
 
diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c
index 3ca6a2b..fed5b61 100644
--- a/fs/ext4/dir.c
+++ b/fs/ext4/dir.c
@@ -459,17 +459,8 @@
 	if (info->extra_fname) {
 		if (call_filldir(filp, dirent, filldir, info->extra_fname))
 			goto finished;
-
 		info->extra_fname = NULL;
-		info->curr_node = rb_next(info->curr_node);
-		if (!info->curr_node) {
-			if (info->next_hash == ~0) {
-				filp->f_pos = EXT4_HTREE_EOF;
-				goto finished;
-			}
-			info->curr_hash = info->next_hash;
-			info->curr_minor_hash = 0;
-		}
+		goto next_node;
 	} else if (!info->curr_node)
 		info->curr_node = rb_first(&info->root);
 
@@ -501,9 +492,14 @@
 		info->curr_minor_hash = fname->minor_hash;
 		if (call_filldir(filp, dirent, filldir, fname))
 			break;
-
+	next_node:
 		info->curr_node = rb_next(info->curr_node);
-		if (!info->curr_node) {
+		if (info->curr_node) {
+			fname = rb_entry(info->curr_node, struct fname,
+					 rb_hash);
+			info->curr_hash = fname->hash;
+			info->curr_minor_hash = fname->minor_hash;
+		} else {
 			if (info->next_hash == ~0) {
 				filp->f_pos = EXT4_HTREE_EOF;
 				break;
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 92db9e9..63adcb7 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1061,7 +1061,6 @@
 struct dentry *ext4_get_parent(struct dentry *child)
 {
 	unsigned long ino;
-	struct dentry *parent;
 	struct inode *inode;
 	static const struct qstr dotdot = {
 		.name = "..",
@@ -1083,16 +1082,7 @@
 		return ERR_PTR(-EIO);
 	}
 
-	inode = ext4_iget(child->d_inode->i_sb, ino);
-	if (IS_ERR(inode))
-		return ERR_CAST(inode);
-
-	parent = d_alloc_anon(inode);
-	if (!parent) {
-		iput(inode);
-		parent = ERR_PTR(-ENOMEM);
-	}
-	return parent;
+	return d_obtain_alias(ext4_iget(child->d_inode->i_sb, ino));
 }
 
 #define S_SHIFT 12
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 9b2b2bc..bdddea1 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -399,7 +399,7 @@
 static int ext4_blkdev_put(struct block_device *bdev)
 {
 	bd_release(bdev);
-	return blkdev_put(bdev);
+	return blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
 }
 
 static int ext4_blkdev_remove(struct ext4_sb_info *sbi)
@@ -2553,7 +2553,7 @@
 	if (bd_claim(bdev, sb)) {
 		printk(KERN_ERR
 			"EXT4: failed to claim external journal device.\n");
-		blkdev_put(bdev);
+		blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
 		return NULL;
 	}
 
@@ -3328,30 +3328,30 @@
  * Standard function to be called on quota_on
  */
 static int ext4_quota_on(struct super_block *sb, int type, int format_id,
-			 char *path, int remount)
+			 char *name, int remount)
 {
 	int err;
-	struct nameidata nd;
+	struct path path;
 
 	if (!test_opt(sb, QUOTA))
 		return -EINVAL;
-	/* When remounting, no checks are needed and in fact, path is NULL */
+	/* When remounting, no checks are needed and in fact, name is NULL */
 	if (remount)
-		return vfs_quota_on(sb, type, format_id, path, remount);
+		return vfs_quota_on(sb, type, format_id, name, remount);
 
-	err = path_lookup(path, LOOKUP_FOLLOW, &nd);
+	err = kern_path(name, LOOKUP_FOLLOW, &path);
 	if (err)
 		return err;
 
 	/* Quotafile not on the same filesystem? */
-	if (nd.path.mnt->mnt_sb != sb) {
-		path_put(&nd.path);
+	if (path.mnt->mnt_sb != sb) {
+		path_put(&path);
 		return -EXDEV;
 	}
 	/* Journaling quota? */
 	if (EXT4_SB(sb)->s_qf_names[type]) {
 		/* Quotafile not in fs root? */
-		if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
+		if (path.dentry->d_parent != sb->s_root)
 			printk(KERN_WARNING
 				"EXT4-fs: Quota file not on filesystem root. "
 				"Journaled quota will not work.\n");
@@ -3361,7 +3361,7 @@
 	 * When we journal data on quota file, we have to flush journal to see
 	 * all updates to the file when we bypass pagecache...
 	 */
-	if (ext4_should_journal_data(nd.path.dentry->d_inode)) {
+	if (ext4_should_journal_data(path.dentry->d_inode)) {
 		/*
 		 * We don't need to lock updates but journal_flush() could
 		 * otherwise be livelocked...
@@ -3370,13 +3370,13 @@
 		err = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
 		jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
 		if (err) {
-			path_put(&nd.path);
+			path_put(&path);
 			return err;
 		}
 	}
 
-	err = vfs_quota_on_path(sb, type, format_id, &nd.path);
-	path_put(&nd.path);
+	err = vfs_quota_on_path(sb, type, format_id, &path);
+	path_put(&path);
 	return err;
 }
 
diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index cd4a016..bae1c32 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -839,6 +839,7 @@
 	.compat_ioctl	= fat_compat_dir_ioctl,
 #endif
 	.fsync		= file_fsync,
+	.llseek		= generic_file_llseek,
 };
 
 static int fat_get_short_entry(struct inode *dir, loff_t *pos,
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index d12cdf2..19eafbe 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -681,33 +681,24 @@
 			inode = NULL;
 		}
 	}
-	if (!inode) {
-		/* For now, do nothing
-		 * What we could do is:
-		 * follow the file starting at fh[4], and record
-		 * the ".." entry, and the name of the fh[2] entry.
-		 * The follow the ".." file finding the next step up.
-		 * This way we build a path to the root of
-		 * the tree. If this works, we lookup the path and so
-		 * get this inode into the cache.
-		 * Finally try the fat_iget lookup again
-		 * If that fails, then weare totally out of luck
-		 * But all that is for another day
-		 */
-	}
-	if (!inode)
-		return ERR_PTR(-ESTALE);
 
-
-	/* now to find a dentry.
-	 * If possible, get a well-connected one
+	/*
+	 * For now, do nothing if the inode is not found.
+	 *
+	 * What we could do is:
+	 *
+	 *	- follow the file starting at fh[4], and record the ".." entry,
+	 *	  and the name of the fh[2] entry.
+	 *	- then follow the ".." file finding the next step up.
+	 *
+	 * This way we build a path to the root of the tree. If this works, we
+	 * lookup the path and so get this inode into the cache.  Finally try
+	 * the fat_iget lookup again.  If that fails, then we are totally out
+	 * of luck.  But all that is for another day
 	 */
-	result = d_alloc_anon(inode);
-	if (result == NULL) {
-		iput(inode);
-		return ERR_PTR(-ENOMEM);
-	}
-	result->d_op = sb->s_root->d_op;
+	result = d_obtain_alias(inode);
+	if (!IS_ERR(result))
+		result->d_op = sb->s_root->d_op;
 	return result;
 }
 
@@ -754,15 +745,8 @@
 	}
 	inode = fat_build_inode(sb, de, i_pos);
 	brelse(bh);
-	if (IS_ERR(inode)) {
-		parent = ERR_CAST(inode);
-		goto out;
-	}
-	parent = d_alloc_anon(inode);
-	if (!parent) {
-		iput(inode);
-		parent = ERR_PTR(-ENOMEM);
-	}
+
+	parent = d_obtain_alias(inode);
 out:
 	unlock_super(sb);
 
diff --git a/fs/fifo.c b/fs/fifo.c
index 987bf94..f8f97b8 100644
--- a/fs/fifo.c
+++ b/fs/fifo.c
@@ -51,7 +51,7 @@
 	filp->f_mode &= (FMODE_READ | FMODE_WRITE);
 
 	switch (filp->f_mode) {
-	case 1:
+	case FMODE_READ:
 	/*
 	 *  O_RDONLY
 	 *  POSIX.1 says that O_NONBLOCK means return with the FIFO
@@ -76,7 +76,7 @@
 		}
 		break;
 	
-	case 2:
+	case FMODE_WRITE:
 	/*
 	 *  O_WRONLY
 	 *  POSIX.1 says that O_NONBLOCK means return -1 with
@@ -98,7 +98,7 @@
 		}
 		break;
 	
-	case 3:
+	case FMODE_READ | FMODE_WRITE:
 	/*
 	 *  O_RDWR
 	 *  POSIX.1 leaves this case "undefined" when O_NONBLOCK is set.
diff --git a/fs/file_table.c b/fs/file_table.c
index f45a449..efc06fa 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -161,7 +161,7 @@
  * code should be moved into this function.
  */
 struct file *alloc_file(struct vfsmount *mnt, struct dentry *dentry,
-		mode_t mode, const struct file_operations *fop)
+		fmode_t mode, const struct file_operations *fop)
 {
 	struct file *file;
 	struct path;
@@ -193,7 +193,7 @@
  * of this should be moving to alloc_file().
  */
 int init_file(struct file *file, struct vfsmount *mnt, struct dentry *dentry,
-	   mode_t mode, const struct file_operations *fop)
+	   fmode_t mode, const struct file_operations *fop)
 {
 	int error = 0;
 	file->f_path.dentry = dentry;
diff --git a/fs/filesystems.c b/fs/filesystems.c
index f37f872..d0e20ce 100644
--- a/fs/filesystems.c
+++ b/fs/filesystems.c
@@ -8,6 +8,8 @@
 
 #include <linux/syscalls.h>
 #include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/kmod.h>
 #include <linux/init.h>
@@ -214,6 +216,43 @@
 	return len;
 }
 
+#ifdef CONFIG_PROC_FS
+static int filesystems_proc_show(struct seq_file *m, void *v)
+{
+	struct file_system_type * tmp;
+
+	read_lock(&file_systems_lock);
+	tmp = file_systems;
+	while (tmp) {
+		seq_printf(m, "%s\t%s\n",
+			(tmp->fs_flags & FS_REQUIRES_DEV) ? "" : "nodev",
+			tmp->name);
+		tmp = tmp->next;
+	}
+	read_unlock(&file_systems_lock);
+	return 0;
+}
+
+static int filesystems_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, filesystems_proc_show, NULL);
+}
+
+static const struct file_operations filesystems_proc_fops = {
+	.open		= filesystems_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_filesystems_init(void)
+{
+	proc_create("filesystems", 0, NULL, &filesystems_proc_fops);
+	return 0;
+}
+module_init(proc_filesystems_init);
+#endif
+
 struct file_system_type *get_fs_type(const char *name)
 {
 	struct file_system_type *fs;
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 54b1f0e..2e99f34 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -596,12 +596,8 @@
 	if (inode->i_generation != handle->generation)
 		goto out_iput;
 
-	entry = d_alloc_anon(inode);
-	err = -ENOMEM;
-	if (!entry)
-		goto out_iput;
-
-	if (get_node_id(inode) != FUSE_ROOT_ID) {
+	entry = d_obtain_alias(inode);
+	if (!IS_ERR(entry) && get_node_id(inode) != FUSE_ROOT_ID) {
 		entry->d_op = &fuse_dentry_operations;
 		fuse_invalidate_entry_cache(entry);
 	}
@@ -696,17 +692,14 @@
 	name.name = "..";
 	err = fuse_lookup_name(child_inode->i_sb, get_node_id(child_inode),
 			       &name, &outarg, &inode);
-	if (err && err != -ENOENT)
+	if (err) {
+		if (err == -ENOENT)
+			return ERR_PTR(-ESTALE);
 		return ERR_PTR(err);
-	if (err || !inode)
-		return ERR_PTR(-ESTALE);
-
-	parent = d_alloc_anon(inode);
-	if (!parent) {
-		iput(inode);
-		return ERR_PTR(-ENOMEM);
 	}
-	if (get_node_id(inode) != FUSE_ROOT_ID) {
+
+	parent = d_obtain_alias(inode);
+	if (!IS_ERR(parent) && get_node_id(inode) != FUSE_ROOT_ID) {
 		parent->d_op = &fuse_dentry_operations;
 		fuse_invalidate_entry_cache(parent);
 	}
diff --git a/fs/gfs2/ops_export.c b/fs/gfs2/ops_export.c
index 9cda853..bbb8c36 100644
--- a/fs/gfs2/ops_export.c
+++ b/fs/gfs2/ops_export.c
@@ -130,28 +130,17 @@
 static struct dentry *gfs2_get_parent(struct dentry *child)
 {
 	struct qstr dotdot;
-	struct inode *inode;
 	struct dentry *dentry;
 
-	gfs2_str2qstr(&dotdot, "..");
-	inode = gfs2_lookupi(child->d_inode, &dotdot, 1);
-
-	if (!inode)
-		return ERR_PTR(-ENOENT);
 	/*
-	 * In case of an error, @inode carries the error value, and we
-	 * have to return that as a(n invalid) pointer to dentry.
+	 * XXX(hch): it would be a good idea to keep this around as a
+	 *	     static variable.
 	 */
-	if (IS_ERR(inode))
-		return ERR_CAST(inode);
+	gfs2_str2qstr(&dotdot, "..");
 
-	dentry = d_alloc_anon(inode);
-	if (!dentry) {
-		iput(inode);
-		return ERR_PTR(-ENOMEM);
-	}
-
-	dentry->d_op = &gfs2_dops;
+	dentry = d_obtain_alias(gfs2_lookupi(child->d_inode, &dotdot, 1));
+	if (!IS_ERR(dentry))
+		dentry->d_op = &gfs2_dops;
 	return dentry;
 }
 
@@ -233,13 +222,9 @@
 	gfs2_glock_dq_uninit(&i_gh);
 
 out_inode:
-	dentry = d_alloc_anon(inode);
-	if (!dentry) {
-		iput(inode);
-		return ERR_PTR(-ENOMEM);
-	}
-
-	dentry->d_op = &gfs2_dops;
+	dentry = d_obtain_alias(inode);
+	if (!IS_ERR(dentry))
+		dentry->d_op = &gfs2_dops;
 	return dentry;
 
 fail_rgd:
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
index 534e1e2..d232991 100644
--- a/fs/gfs2/ops_inode.c
+++ b/fs/gfs2/ops_inode.c
@@ -69,7 +69,7 @@
 			mark_inode_dirty(inode);
 			break;
 		} else if (PTR_ERR(inode) != -EEXIST ||
-			   (nd && (nd->intent.open.flags & O_EXCL))) {
+			   (nd && nd->flags & LOOKUP_EXCL)) {
 			gfs2_holder_uninit(ghs);
 			return PTR_ERR(inode);
 		}
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index 7e19835..c69b7ac 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -511,13 +511,6 @@
 	}
 }
 
-static int hfs_permission(struct inode *inode, int mask)
-{
-	if (S_ISREG(inode->i_mode) && mask & MAY_EXEC)
-		return 0;
-	return generic_permission(inode, mask, NULL);
-}
-
 static int hfs_file_open(struct inode *inode, struct file *file)
 {
 	if (HFS_IS_RSRC(inode))
@@ -616,7 +609,6 @@
 	.lookup		= hfs_file_lookup,
 	.truncate	= hfs_file_truncate,
 	.setattr	= hfs_inode_setattr,
-	.permission	= hfs_permission,
 	.setxattr	= hfs_setxattr,
 	.getxattr	= hfs_getxattr,
 	.listxattr	= hfs_listxattr,
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index 963be64..b207f0e 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -238,18 +238,6 @@
 	perms->dev = cpu_to_be32(HFSPLUS_I(inode).dev);
 }
 
-static int hfsplus_permission(struct inode *inode, int mask)
-{
-	/* MAY_EXEC is also used for lookup, if no x bit is set allow lookup,
-	 * open_exec has the same test, so it's still not executable, if a x bit
-	 * is set fall back to standard permission check.
-	 */
-	if (S_ISREG(inode->i_mode) && mask & MAY_EXEC && !(inode->i_mode & 0111))
-		return 0;
-	return generic_permission(inode, mask, NULL);
-}
-
-
 static int hfsplus_file_open(struct inode *inode, struct file *file)
 {
 	if (HFSPLUS_IS_RSRC(inode))
@@ -281,7 +269,6 @@
 static const struct inode_operations hfsplus_file_inode_operations = {
 	.lookup		= hfsplus_file_lookup,
 	.truncate	= hfsplus_file_truncate,
-	.permission	= hfsplus_permission,
 	.setxattr	= hfsplus_setxattr,
 	.getxattr	= hfsplus_getxattr,
 	.listxattr	= hfsplus_listxattr,
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index d6ecabf..7f34f43 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -20,7 +20,7 @@
 struct hostfs_inode_info {
 	char *host_filename;
 	int fd;
-	int mode;
+	fmode_t mode;
 	struct inode vfs_inode;
 };
 
@@ -373,7 +373,8 @@
 int hostfs_file_open(struct inode *ino, struct file *file)
 {
 	char *name;
-	int mode = 0, r = 0, w = 0, fd;
+	fmode_t mode = 0;
+	int r = 0, w = 0, fd;
 
 	mode = file->f_mode & (FMODE_READ | FMODE_WRITE);
 	if ((mode & HOSTFS_I(ino)->mode) == mode)
diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c
index be8be50..64ab522 100644
--- a/fs/hpfs/file.c
+++ b/fs/hpfs/file.c
@@ -143,5 +143,5 @@
 const struct inode_operations hpfs_file_iops =
 {
 	.truncate	= hpfs_truncate,
-	.setattr	= hpfs_notify_change,
+	.setattr	= hpfs_setattr,
 };
diff --git a/fs/hpfs/hpfs_fn.h b/fs/hpfs/hpfs_fn.h
index 42ff60c..c2ea31b 100644
--- a/fs/hpfs/hpfs_fn.h
+++ b/fs/hpfs/hpfs_fn.h
@@ -275,7 +275,7 @@
 void hpfs_read_inode(struct inode *);
 void hpfs_write_inode(struct inode *);
 void hpfs_write_inode_nolock(struct inode *);
-int hpfs_notify_change(struct dentry *, struct iattr *);
+int hpfs_setattr(struct dentry *, struct iattr *);
 void hpfs_write_if_changed(struct inode *);
 void hpfs_delete_inode(struct inode *);
 
diff --git a/fs/hpfs/inode.c b/fs/hpfs/inode.c
index 85d3e1d..39a1bfb 100644
--- a/fs/hpfs/inode.c
+++ b/fs/hpfs/inode.c
@@ -260,19 +260,28 @@
 	brelse(bh);
 }
 
-int hpfs_notify_change(struct dentry *dentry, struct iattr *attr)
+int hpfs_setattr(struct dentry *dentry, struct iattr *attr)
 {
 	struct inode *inode = dentry->d_inode;
-	int error=0;
+	int error = -EINVAL;
+
 	lock_kernel();
-	if ( ((attr->ia_valid & ATTR_SIZE) && attr->ia_size > inode->i_size) ||
-	     (hpfs_sb(inode->i_sb)->sb_root == inode->i_ino) ) {
-		error = -EINVAL;
-	} else if ((error = inode_change_ok(inode, attr))) {
-	} else if ((error = inode_setattr(inode, attr))) {
-	} else {
-		hpfs_write_inode(inode);
-	}
+	if (inode->i_ino == hpfs_sb(inode->i_sb)->sb_root)
+		goto out_unlock;
+	if ((attr->ia_valid & ATTR_SIZE) && attr->ia_size > inode->i_size)
+		goto out_unlock;
+
+	error = inode_change_ok(inode, attr);
+	if (error)
+		goto out_unlock;
+
+	error = inode_setattr(inode, attr);
+	if (error)
+		goto out_unlock;
+
+	hpfs_write_inode(inode);
+
+ out_unlock:
 	unlock_kernel();
 	return error;
 }
diff --git a/fs/hpfs/namei.c b/fs/hpfs/namei.c
index d9c59a77..10783f3 100644
--- a/fs/hpfs/namei.c
+++ b/fs/hpfs/namei.c
@@ -669,5 +669,5 @@
 	.rmdir		= hpfs_rmdir,
 	.mknod		= hpfs_mknod,
 	.rename		= hpfs_rename,
-	.setattr	= hpfs_notify_change,
+	.setattr	= hpfs_setattr,
 };
diff --git a/fs/isofs/export.c b/fs/isofs/export.c
index bb2191383..e81a305 100644
--- a/fs/isofs/export.c
+++ b/fs/isofs/export.c
@@ -22,7 +22,7 @@
 		  __u32 generation)
 {
 	struct inode *inode;
-	struct dentry *result;
+
 	if (block == 0)
 		return ERR_PTR(-ESTALE);
 	inode = isofs_iget(sb, block, offset);
@@ -32,12 +32,7 @@
 		iput(inode);
 		return ERR_PTR(-ESTALE);
 	}
-	result = d_alloc_anon(inode);
-	if (!result) {
-		iput(inode);
-		return ERR_PTR(-ENOMEM);
-	}
-	return result;
+	return d_obtain_alias(inode);
 }
 
 /* This function is surprisingly simple.  The trick is understanding
@@ -51,7 +46,6 @@
 	unsigned long parent_offset = 0;
 	struct inode *child_inode = child->d_inode;
 	struct iso_inode_info *e_child_inode = ISOFS_I(child_inode);
-	struct inode *parent_inode = NULL;
 	struct iso_directory_record *de = NULL;
 	struct buffer_head * bh = NULL;
 	struct dentry *rv = NULL;
@@ -104,28 +98,11 @@
 	/* Normalize */
 	isofs_normalize_block_and_offset(de, &parent_block, &parent_offset);
 
-	/* Get the inode. */
-	parent_inode = isofs_iget(child_inode->i_sb,
-				  parent_block,
-				  parent_offset);
-	if (IS_ERR(parent_inode)) {
-		rv = ERR_CAST(parent_inode);
-		if (rv != ERR_PTR(-ENOMEM))
-			rv = ERR_PTR(-EACCES);
-		goto out;
-	}
-
-	/* Allocate the dentry. */
-	rv = d_alloc_anon(parent_inode);
-	if (rv == NULL) {
-		rv = ERR_PTR(-ENOMEM);
-		goto out;
-	}
-
+	rv = d_obtain_alias(isofs_iget(child_inode->i_sb, parent_block,
+				     parent_offset));
  out:
-	if (bh) {
+	if (bh)
 		brelse(bh);
-	}
 	return rv;
 }
 
diff --git a/fs/jbd/checkpoint.c b/fs/jbd/checkpoint.c
index a5432bb..1bd8d4a 100644
--- a/fs/jbd/checkpoint.c
+++ b/fs/jbd/checkpoint.c
@@ -93,7 +93,8 @@
 	int ret = 0;
 	struct buffer_head *bh = jh2bh(jh);
 
-	if (jh->b_jlist == BJ_None && !buffer_locked(bh) && !buffer_dirty(bh)) {
+	if (jh->b_jlist == BJ_None && !buffer_locked(bh) &&
+	    !buffer_dirty(bh) && !buffer_write_io_error(bh)) {
 		JBUFFER_TRACE(jh, "remove from checkpoint list");
 		ret = __journal_remove_checkpoint(jh) + 1;
 		jbd_unlock_bh_state(bh);
@@ -126,14 +127,29 @@
 
 		/*
 		 * Test again, another process may have checkpointed while we
-		 * were waiting for the checkpoint lock
+		 * were waiting for the checkpoint lock. If there are no
+		 * outstanding transactions there is nothing to checkpoint and
+		 * we can't make progress. Abort the journal in this case.
 		 */
 		spin_lock(&journal->j_state_lock);
+		spin_lock(&journal->j_list_lock);
 		nblocks = jbd_space_needed(journal);
 		if (__log_space_left(journal) < nblocks) {
+			int chkpt = journal->j_checkpoint_transactions != NULL;
+
+			spin_unlock(&journal->j_list_lock);
 			spin_unlock(&journal->j_state_lock);
-			log_do_checkpoint(journal);
+			if (chkpt) {
+				log_do_checkpoint(journal);
+			} else {
+				printk(KERN_ERR "%s: no transactions\n",
+				       __func__);
+				journal_abort(journal, 0);
+			}
+
 			spin_lock(&journal->j_state_lock);
+		} else {
+			spin_unlock(&journal->j_list_lock);
 		}
 		mutex_unlock(&journal->j_checkpoint_mutex);
 	}
@@ -160,21 +176,25 @@
  * buffers. Note that we take the buffers in the opposite ordering
  * from the one in which they were submitted for IO.
  *
+ * Return 0 on success, and return <0 if some buffers have failed
+ * to be written out.
+ *
  * Called with j_list_lock held.
  */
-static void __wait_cp_io(journal_t *journal, transaction_t *transaction)
+static int __wait_cp_io(journal_t *journal, transaction_t *transaction)
 {
 	struct journal_head *jh;
 	struct buffer_head *bh;
 	tid_t this_tid;
 	int released = 0;
+	int ret = 0;
 
 	this_tid = transaction->t_tid;
 restart:
 	/* Did somebody clean up the transaction in the meanwhile? */
 	if (journal->j_checkpoint_transactions != transaction ||
 			transaction->t_tid != this_tid)
-		return;
+		return ret;
 	while (!released && transaction->t_checkpoint_io_list) {
 		jh = transaction->t_checkpoint_io_list;
 		bh = jh2bh(jh);
@@ -194,6 +214,9 @@
 			spin_lock(&journal->j_list_lock);
 			goto restart;
 		}
+		if (unlikely(buffer_write_io_error(bh)))
+			ret = -EIO;
+
 		/*
 		 * Now in whatever state the buffer currently is, we know that
 		 * it has been written out and so we can drop it from the list
@@ -203,6 +226,8 @@
 		journal_remove_journal_head(bh);
 		__brelse(bh);
 	}
+
+	return ret;
 }
 
 #define NR_BATCH	64
@@ -226,7 +251,8 @@
  * Try to flush one buffer from the checkpoint list to disk.
  *
  * Return 1 if something happened which requires us to abort the current
- * scan of the checkpoint list.
+ * scan of the checkpoint list.  Return <0 if the buffer has failed to
+ * be written out.
  *
  * Called with j_list_lock held and drops it if 1 is returned
  * Called under jbd_lock_bh_state(jh2bh(jh)), and drops it
@@ -256,6 +282,9 @@
 		log_wait_commit(journal, tid);
 		ret = 1;
 	} else if (!buffer_dirty(bh)) {
+		ret = 1;
+		if (unlikely(buffer_write_io_error(bh)))
+			ret = -EIO;
 		J_ASSERT_JH(jh, !buffer_jbddirty(bh));
 		BUFFER_TRACE(bh, "remove from checkpoint");
 		__journal_remove_checkpoint(jh);
@@ -263,7 +292,6 @@
 		jbd_unlock_bh_state(bh);
 		journal_remove_journal_head(bh);
 		__brelse(bh);
-		ret = 1;
 	} else {
 		/*
 		 * Important: we are about to write the buffer, and
@@ -295,6 +323,7 @@
  * to disk. We submit larger chunks of data at once.
  *
  * The journal should be locked before calling this function.
+ * Called with j_checkpoint_mutex held.
  */
 int log_do_checkpoint(journal_t *journal)
 {
@@ -318,6 +347,7 @@
 	 * OK, we need to start writing disk blocks.  Take one transaction
 	 * and write it.
 	 */
+	result = 0;
 	spin_lock(&journal->j_list_lock);
 	if (!journal->j_checkpoint_transactions)
 		goto out;
@@ -334,7 +364,7 @@
 		int batch_count = 0;
 		struct buffer_head *bhs[NR_BATCH];
 		struct journal_head *jh;
-		int retry = 0;
+		int retry = 0, err;
 
 		while (!retry && transaction->t_checkpoint_list) {
 			struct buffer_head *bh;
@@ -347,6 +377,8 @@
 				break;
 			}
 			retry = __process_buffer(journal, jh, bhs,&batch_count);
+			if (retry < 0 && !result)
+				result = retry;
 			if (!retry && (need_resched() ||
 				spin_needbreak(&journal->j_list_lock))) {
 				spin_unlock(&journal->j_list_lock);
@@ -371,14 +403,18 @@
 		 * Now we have cleaned up the first transaction's checkpoint
 		 * list. Let's clean up the second one
 		 */
-		__wait_cp_io(journal, transaction);
+		err = __wait_cp_io(journal, transaction);
+		if (!result)
+			result = err;
 	}
 out:
 	spin_unlock(&journal->j_list_lock);
-	result = cleanup_journal_tail(journal);
 	if (result < 0)
-		return result;
-	return 0;
+		journal_abort(journal, result);
+	else
+		result = cleanup_journal_tail(journal);
+
+	return (result < 0) ? result : 0;
 }
 
 /*
@@ -394,8 +430,9 @@
  * This is the only part of the journaling code which really needs to be
  * aware of transaction aborts.  Checkpointing involves writing to the
  * main filesystem area rather than to the journal, so it can proceed
- * even in abort state, but we must not update the journal superblock if
- * we have an abort error outstanding.
+ * even in abort state, but we must not update the super block if
+ * checkpointing may have failed.  Otherwise, we would lose some metadata
+ * buffers which should be written-back to the filesystem.
  */
 
 int cleanup_journal_tail(journal_t *journal)
@@ -404,6 +441,9 @@
 	tid_t		first_tid;
 	unsigned long	blocknr, freed;
 
+	if (is_journal_aborted(journal))
+		return 1;
+
 	/* OK, work out the oldest transaction remaining in the log, and
 	 * the log block it starts at.
 	 *
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index aa7143a..9e4fa52 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -1121,9 +1121,12 @@
  *
  * Release a journal_t structure once it is no longer in use by the
  * journaled object.
+ * Return <0 if we couldn't clean up the journal.
  */
-void journal_destroy(journal_t *journal)
+int journal_destroy(journal_t *journal)
 {
+	int err = 0;
+
 	/* Wait for the commit thread to wake up and die. */
 	journal_kill_thread(journal);
 
@@ -1146,11 +1149,16 @@
 	J_ASSERT(journal->j_checkpoint_transactions == NULL);
 	spin_unlock(&journal->j_list_lock);
 
-	/* We can now mark the journal as empty. */
-	journal->j_tail = 0;
-	journal->j_tail_sequence = ++journal->j_transaction_sequence;
 	if (journal->j_sb_buffer) {
-		journal_update_superblock(journal, 1);
+		if (!is_journal_aborted(journal)) {
+			/* We can now mark the journal as empty. */
+			journal->j_tail = 0;
+			journal->j_tail_sequence =
+				++journal->j_transaction_sequence;
+			journal_update_superblock(journal, 1);
+		} else {
+			err = -EIO;
+		}
 		brelse(journal->j_sb_buffer);
 	}
 
@@ -1160,6 +1168,8 @@
 		journal_destroy_revoke(journal);
 	kfree(journal->j_wbuf);
 	kfree(journal);
+
+	return err;
 }
 
 
@@ -1359,10 +1369,16 @@
 	spin_lock(&journal->j_list_lock);
 	while (!err && journal->j_checkpoint_transactions != NULL) {
 		spin_unlock(&journal->j_list_lock);
+		mutex_lock(&journal->j_checkpoint_mutex);
 		err = log_do_checkpoint(journal);
+		mutex_unlock(&journal->j_checkpoint_mutex);
 		spin_lock(&journal->j_list_lock);
 	}
 	spin_unlock(&journal->j_list_lock);
+
+	if (is_journal_aborted(journal))
+		return -EIO;
+
 	cleanup_journal_tail(journal);
 
 	/* Finally, mark the journal as really needing no recovery.
@@ -1384,7 +1400,7 @@
 	J_ASSERT(journal->j_head == journal->j_tail);
 	J_ASSERT(journal->j_tail_sequence == journal->j_transaction_sequence);
 	spin_unlock(&journal->j_state_lock);
-	return err;
+	return 0;
 }
 
 /**
diff --git a/fs/jbd/recovery.c b/fs/jbd/recovery.c
index 43bc5e5..db5e982 100644
--- a/fs/jbd/recovery.c
+++ b/fs/jbd/recovery.c
@@ -223,7 +223,7 @@
  */
 int journal_recover(journal_t *journal)
 {
-	int			err;
+	int			err, err2;
 	journal_superblock_t *	sb;
 
 	struct recovery_info	info;
@@ -261,7 +261,10 @@
 	journal->j_transaction_sequence = ++info.end_transaction;
 
 	journal_clear_revoke(journal);
-	sync_blockdev(journal->j_fs_dev);
+	err2 = sync_blockdev(journal->j_fs_dev);
+	if (!err)
+		err = err2;
+
 	return err;
 }
 
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index b1aaae8..6f60cc91 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -39,7 +39,8 @@
 	.read =		generic_read_dir,
 	.readdir =	jffs2_readdir,
 	.unlocked_ioctl=jffs2_ioctl,
-	.fsync =	jffs2_fsync
+	.fsync =	jffs2_fsync,
+	.llseek =	generic_file_llseek,
 };
 
 
@@ -108,9 +109,7 @@
 		}
 	}
 
-	d_add(target, inode);
-
-	return NULL;
+	return d_splice_alias(inode, target);
 }
 
 /***********************************************************************/
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index efd4012..4c4e18c 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -22,6 +22,7 @@
 #include <linux/mtd/super.h>
 #include <linux/ctype.h>
 #include <linux/namei.h>
+#include <linux/exportfs.h>
 #include "compr.h"
 #include "nodelist.h"
 
@@ -62,6 +63,52 @@
 	return 0;
 }
 
+static struct inode *jffs2_nfs_get_inode(struct super_block *sb, uint64_t ino,
+					 uint32_t generation)
+{
+	/* We don't care about i_generation. We'll destroy the flash
+	   before we start re-using inode numbers anyway. And even
+	   if that wasn't true, we'd have other problems...*/
+	return jffs2_iget(sb, ino);
+}
+
+static struct dentry *jffs2_fh_to_dentry(struct super_block *sb, struct fid *fid,
+					 int fh_len, int fh_type)
+{
+        return generic_fh_to_dentry(sb, fid, fh_len, fh_type,
+                                    jffs2_nfs_get_inode);
+}
+
+static struct dentry *jffs2_fh_to_parent(struct super_block *sb, struct fid *fid,
+					 int fh_len, int fh_type)
+{
+        return generic_fh_to_parent(sb, fid, fh_len, fh_type,
+                                    jffs2_nfs_get_inode);
+}
+
+static struct dentry *jffs2_get_parent(struct dentry *child)
+{
+	struct jffs2_inode_info *f;
+	uint32_t pino;
+
+	BUG_ON(!S_ISDIR(child->d_inode->i_mode));
+
+	f = JFFS2_INODE_INFO(child->d_inode);
+
+	pino = f->inocache->pino_nlink;
+
+	JFFS2_DEBUG("Parent of directory ino #%u is #%u\n",
+		    f->inocache->ino, pino);
+
+	return d_obtain_alias(jffs2_iget(child->d_inode->i_sb, pino));
+}
+
+static struct export_operations jffs2_export_ops = {
+	.get_parent = jffs2_get_parent,
+	.fh_to_dentry = jffs2_fh_to_dentry,
+	.fh_to_parent = jffs2_fh_to_parent,
+};
+
 static const struct super_operations jffs2_super_operations =
 {
 	.alloc_inode =	jffs2_alloc_inode,
@@ -104,6 +151,7 @@
 	spin_lock_init(&c->inocache_lock);
 
 	sb->s_op = &jffs2_super_operations;
+	sb->s_export_op = &jffs2_export_ops;
 	sb->s_flags = sb->s_flags | MS_NOATIME;
 	sb->s_xattr = jffs2_xattr_handlers;
 #ifdef CONFIG_JFFS2_FS_POSIX_ACL
diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c
index cd2ec29..335c4de 100644
--- a/fs/jfs/jfs_logmgr.c
+++ b/fs/jfs/jfs_logmgr.c
@@ -1168,7 +1168,7 @@
 	bd_release(bdev);
 
       close:		/* close external log device */
-	blkdev_put(bdev);
+	blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
 
       free:		/* free log descriptor */
 	mutex_unlock(&jfs_log_mutex);
@@ -1514,7 +1514,7 @@
 	rc = lmLogShutdown(log);
 
 	bd_release(bdev);
-	blkdev_put(bdev);
+	blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
 
 	kfree(log);
 
diff --git a/fs/jfs/namei.c b/fs/jfs/namei.c
index 2aba823..cc3cedff 100644
--- a/fs/jfs/namei.c
+++ b/fs/jfs/namei.c
@@ -1511,25 +1511,12 @@
 
 struct dentry *jfs_get_parent(struct dentry *dentry)
 {
-	struct super_block *sb = dentry->d_inode->i_sb;
-	struct dentry *parent = ERR_PTR(-ENOENT);
-	struct inode *inode;
 	unsigned long parent_ino;
 
 	parent_ino =
 		le32_to_cpu(JFS_IP(dentry->d_inode)->i_dtroot.header.idotdot);
-	inode = jfs_iget(sb, parent_ino);
-	if (IS_ERR(inode)) {
-		parent = ERR_CAST(inode);
-	} else {
-		parent = d_alloc_anon(inode);
-		if (!parent) {
-			parent = ERR_PTR(-ENOMEM);
-			iput(inode);
-		}
-	}
 
-	return parent;
+	return d_obtain_alias(jfs_iget(dentry->d_inode->i_sb, parent_ino));
 }
 
 const struct inode_operations jfs_dir_inode_operations = {
@@ -1560,6 +1547,7 @@
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= jfs_compat_ioctl,
 #endif
+	.llseek		= generic_file_llseek,
 };
 
 static int jfs_ci_hash(struct dentry *dir, struct qstr *this)
diff --git a/fs/libfs.c b/fs/libfs.c
index 1add676..7468859 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -732,28 +732,6 @@
 	return ret;
 }
 
-/*
- * This is what d_alloc_anon should have been.  Once the exportfs
- * argument transition has been finished I will update d_alloc_anon
- * to this prototype and this wrapper will go away.   --hch
- */
-static struct dentry *exportfs_d_alloc(struct inode *inode)
-{
-	struct dentry *dentry;
-
-	if (!inode)
-		return NULL;
-	if (IS_ERR(inode))
-		return ERR_PTR(PTR_ERR(inode));
-
-	dentry = d_alloc_anon(inode);
-	if (!dentry) {
-		iput(inode);
-		dentry = ERR_PTR(-ENOMEM);
-	}
-	return dentry;
-}
-
 /**
  * generic_fh_to_dentry - generic helper for the fh_to_dentry export operation
  * @sb:		filesystem to do the file handle conversion on
@@ -782,7 +760,7 @@
 		break;
 	}
 
-	return exportfs_d_alloc(inode);
+	return d_obtain_alias(inode);
 }
 EXPORT_SYMBOL_GPL(generic_fh_to_dentry);
 
@@ -815,7 +793,7 @@
 		break;
 	}
 
-	return exportfs_d_alloc(inode);
+	return d_obtain_alias(inode);
 }
 EXPORT_SYMBOL_GPL(generic_fh_to_parent);
 
diff --git a/fs/locks.c b/fs/locks.c
index 5eb259e..09062e3 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -1580,7 +1580,8 @@
 	cmd &= ~LOCK_NB;
 	unlock = (cmd == LOCK_UN);
 
-	if (!unlock && !(cmd & LOCK_MAND) && !(filp->f_mode & 3))
+	if (!unlock && !(cmd & LOCK_MAND) &&
+	    !(filp->f_mode & (FMODE_READ|FMODE_WRITE)))
 		goto out_putf;
 
 	error = flock_make_lock(filp, &lock, cmd);
@@ -2078,6 +2079,7 @@
 EXPORT_SYMBOL_GPL(vfs_cancel_lock);
 
 #ifdef CONFIG_PROC_FS
+#include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 
 static void lock_get_status(struct seq_file *f, struct file_lock *fl,
@@ -2183,12 +2185,31 @@
 	unlock_kernel();
 }
 
-struct seq_operations locks_seq_operations = {
+static const struct seq_operations locks_seq_operations = {
 	.start	= locks_start,
 	.next	= locks_next,
 	.stop	= locks_stop,
 	.show	= locks_show,
 };
+
+static int locks_open(struct inode *inode, struct file *filp)
+{
+	return seq_open(filp, &locks_seq_operations);
+}
+
+static const struct file_operations proc_locks_operations = {
+	.open		= locks_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int __init proc_locks_init(void)
+{
+	proc_create("locks", 0, NULL, &proc_locks_operations);
+	return 0;
+}
+module_init(proc_locks_init);
 #endif
 
 /**
diff --git a/fs/namei.c b/fs/namei.c
index 4ea63ed..09ce58e 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -212,8 +212,7 @@
 	 * Read/write DACs are always overridable.
 	 * Executable DACs are overridable if at least one exec bit is set.
 	 */
-	if (!(mask & MAY_EXEC) ||
-	    (inode->i_mode & S_IXUGO) || S_ISDIR(inode->i_mode))
+	if (!(mask & MAY_EXEC) || execute_ok(inode))
 		if (capable(CAP_DAC_OVERRIDE))
 			return 0;
 
@@ -249,23 +248,11 @@
 	}
 
 	/* Ordinary permission routines do not understand MAY_APPEND. */
-	if (inode->i_op && inode->i_op->permission) {
+	if (inode->i_op && inode->i_op->permission)
 		retval = inode->i_op->permission(inode, mask);
-		if (!retval) {
-			/*
-			 * Exec permission on a regular file is denied if none
-			 * of the execute bits are set.
-			 *
-			 * This check should be done by the ->permission()
-			 * method.
-			 */
-			if ((mask & MAY_EXEC) && S_ISREG(inode->i_mode) &&
-			    !(inode->i_mode & S_IXUGO))
-				return -EACCES;
-		}
-	} else {
+	else
 		retval = generic_permission(inode, mask, NULL);
-	}
+
 	if (retval)
 		return retval;
 
@@ -1106,6 +1093,15 @@
 	return do_path_lookup(AT_FDCWD, name, flags, nd);
 }
 
+int kern_path(const char *name, unsigned int flags, struct path *path)
+{
+	struct nameidata nd;
+	int res = do_path_lookup(AT_FDCWD, name, flags, &nd);
+	if (!res)
+		*path = nd.path;
+	return res;
+}
+
 /**
  * vfs_path_lookup - lookup a file path relative to a dentry-vfsmount pair
  * @dentry:  pointer to dentry of the base directory
@@ -1138,29 +1134,6 @@
 
 }
 
-static int __path_lookup_intent_open(int dfd, const char *name,
-		unsigned int lookup_flags, struct nameidata *nd,
-		int open_flags, int create_mode)
-{
-	struct file *filp = get_empty_filp();
-	int err;
-
-	if (filp == NULL)
-		return -ENFILE;
-	nd->intent.open.file = filp;
-	nd->intent.open.flags = open_flags;
-	nd->intent.open.create_mode = create_mode;
-	err = do_path_lookup(dfd, name, lookup_flags|LOOKUP_OPEN, nd);
-	if (IS_ERR(nd->intent.open.file)) {
-		if (err == 0) {
-			err = PTR_ERR(nd->intent.open.file);
-			path_put(&nd->path);
-		}
-	} else if (err != 0)
-		release_open_intent(nd);
-	return err;
-}
-
 /**
  * path_lookup_open - lookup a file path with open intent
  * @dfd: the directory to use as base, or AT_FDCWD
@@ -1172,25 +1145,23 @@
 int path_lookup_open(int dfd, const char *name, unsigned int lookup_flags,
 		struct nameidata *nd, int open_flags)
 {
-	return __path_lookup_intent_open(dfd, name, lookup_flags, nd,
-			open_flags, 0);
-}
+	struct file *filp = get_empty_filp();
+	int err;
 
-/**
- * path_lookup_create - lookup a file path with open + create intent
- * @dfd: the directory to use as base, or AT_FDCWD
- * @name: pointer to file name
- * @lookup_flags: lookup intent flags
- * @nd: pointer to nameidata
- * @open_flags: open intent flags
- * @create_mode: create intent flags
- */
-static int path_lookup_create(int dfd, const char *name,
-			      unsigned int lookup_flags, struct nameidata *nd,
-			      int open_flags, int create_mode)
-{
-	return __path_lookup_intent_open(dfd, name, lookup_flags|LOOKUP_CREATE,
-			nd, open_flags, create_mode);
+	if (filp == NULL)
+		return -ENFILE;
+	nd->intent.open.file = filp;
+	nd->intent.open.flags = open_flags;
+	nd->intent.open.create_mode = 0;
+	err = do_path_lookup(dfd, name, lookup_flags|LOOKUP_OPEN, nd);
+	if (IS_ERR(nd->intent.open.file)) {
+		if (err == 0) {
+			err = PTR_ERR(nd->intent.open.file);
+			path_put(&nd->path);
+		}
+	} else if (err != 0)
+		release_open_intent(nd);
+	return err;
 }
 
 static struct dentry *__lookup_hash(struct qstr *name,
@@ -1470,20 +1441,18 @@
 
 	mutex_lock(&p1->d_inode->i_sb->s_vfs_rename_mutex);
 
-	for (p = p1; p->d_parent != p; p = p->d_parent) {
-		if (p->d_parent == p2) {
-			mutex_lock_nested(&p2->d_inode->i_mutex, I_MUTEX_PARENT);
-			mutex_lock_nested(&p1->d_inode->i_mutex, I_MUTEX_CHILD);
-			return p;
-		}
+	p = d_ancestor(p2, p1);
+	if (p) {
+		mutex_lock_nested(&p2->d_inode->i_mutex, I_MUTEX_PARENT);
+		mutex_lock_nested(&p1->d_inode->i_mutex, I_MUTEX_CHILD);
+		return p;
 	}
 
-	for (p = p2; p->d_parent != p; p = p->d_parent) {
-		if (p->d_parent == p1) {
-			mutex_lock_nested(&p1->d_inode->i_mutex, I_MUTEX_PARENT);
-			mutex_lock_nested(&p2->d_inode->i_mutex, I_MUTEX_CHILD);
-			return p;
-		}
+	p = d_ancestor(p1, p2);
+	if (p) {
+		mutex_lock_nested(&p1->d_inode->i_mutex, I_MUTEX_PARENT);
+		mutex_lock_nested(&p2->d_inode->i_mutex, I_MUTEX_CHILD);
+		return p;
 	}
 
 	mutex_lock_nested(&p1->d_inode->i_mutex, I_MUTEX_PARENT);
@@ -1702,8 +1671,7 @@
 	/*
 	 * Create - we need to know the parent.
 	 */
-	error = path_lookup_create(dfd, pathname, LOOKUP_PARENT,
-				   &nd, flag, mode);
+	error = do_path_lookup(dfd, pathname, LOOKUP_PARENT, &nd);
 	if (error)
 		return ERR_PTR(error);
 
@@ -1714,10 +1682,20 @@
 	 */
 	error = -EISDIR;
 	if (nd.last_type != LAST_NORM || nd.last.name[nd.last.len])
-		goto exit;
+		goto exit_parent;
 
+	error = -ENFILE;
+	filp = get_empty_filp();
+	if (filp == NULL)
+		goto exit_parent;
+	nd.intent.open.file = filp;
+	nd.intent.open.flags = flag;
+	nd.intent.open.create_mode = mode;
 	dir = nd.path.dentry;
 	nd.flags &= ~LOOKUP_PARENT;
+	nd.flags |= LOOKUP_CREATE | LOOKUP_OPEN;
+	if (flag & O_EXCL)
+		nd.flags |= LOOKUP_EXCL;
 	mutex_lock(&dir->d_inode->i_mutex);
 	path.dentry = lookup_hash(&nd);
 	path.mnt = nd.path.mnt;
@@ -1822,6 +1800,7 @@
 exit:
 	if (!IS_ERR(nd.intent.open.file))
 		release_open_intent(&nd);
+exit_parent:
 	path_put(&nd.path);
 	return ERR_PTR(error);
 
@@ -1914,7 +1893,7 @@
 	if (nd->last_type != LAST_NORM)
 		goto fail;
 	nd->flags &= ~LOOKUP_PARENT;
-	nd->flags |= LOOKUP_CREATE;
+	nd->flags |= LOOKUP_CREATE | LOOKUP_EXCL;
 	nd->intent.open.flags = O_EXCL;
 
 	/*
@@ -2178,16 +2157,19 @@
 		return error;
 
 	switch(nd.last_type) {
-		case LAST_DOTDOT:
-			error = -ENOTEMPTY;
-			goto exit1;
-		case LAST_DOT:
-			error = -EINVAL;
-			goto exit1;
-		case LAST_ROOT:
-			error = -EBUSY;
-			goto exit1;
+	case LAST_DOTDOT:
+		error = -ENOTEMPTY;
+		goto exit1;
+	case LAST_DOT:
+		error = -EINVAL;
+		goto exit1;
+	case LAST_ROOT:
+		error = -EBUSY;
+		goto exit1;
 	}
+
+	nd.flags &= ~LOOKUP_PARENT;
+
 	mutex_lock_nested(&nd.path.dentry->d_inode->i_mutex, I_MUTEX_PARENT);
 	dentry = lookup_hash(&nd);
 	error = PTR_ERR(dentry);
@@ -2265,6 +2247,9 @@
 	error = -EISDIR;
 	if (nd.last_type != LAST_NORM)
 		goto exit1;
+
+	nd.flags &= ~LOOKUP_PARENT;
+
 	mutex_lock_nested(&nd.path.dentry->d_inode->i_mutex, I_MUTEX_PARENT);
 	dentry = lookup_hash(&nd);
 	error = PTR_ERR(dentry);
@@ -2654,6 +2639,10 @@
 	if (newnd.last_type != LAST_NORM)
 		goto exit2;
 
+	oldnd.flags &= ~LOOKUP_PARENT;
+	newnd.flags &= ~LOOKUP_PARENT;
+	newnd.flags |= LOOKUP_RENAME_TARGET;
+
 	trap = lock_rename(new_dir, old_dir);
 
 	old_dentry = lookup_hash(&oldnd);
@@ -2855,6 +2844,7 @@
 EXPORT_SYMBOL(page_symlink);
 EXPORT_SYMBOL(page_symlink_inode_operations);
 EXPORT_SYMBOL(path_lookup);
+EXPORT_SYMBOL(kern_path);
 EXPORT_SYMBOL(vfs_path_lookup);
 EXPORT_SYMBOL(inode_permission);
 EXPORT_SYMBOL(vfs_permission);
diff --git a/fs/namespace.c b/fs/namespace.c
index 6e283c9..cce4670 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1167,19 +1167,19 @@
 
 #endif
 
-static int mount_is_safe(struct nameidata *nd)
+static int mount_is_safe(struct path *path)
 {
 	if (capable(CAP_SYS_ADMIN))
 		return 0;
 	return -EPERM;
 #ifdef notyet
-	if (S_ISLNK(nd->path.dentry->d_inode->i_mode))
+	if (S_ISLNK(path->dentry->d_inode->i_mode))
 		return -EPERM;
-	if (nd->path.dentry->d_inode->i_mode & S_ISVTX) {
-		if (current->uid != nd->path.dentry->d_inode->i_uid)
+	if (path->dentry->d_inode->i_mode & S_ISVTX) {
+		if (current->uid != path->dentry->d_inode->i_uid)
 			return -EPERM;
 	}
-	if (vfs_permission(nd, MAY_WRITE))
+	if (inode_permission(path->dentry->d_inode, MAY_WRITE))
 		return -EPERM;
 	return 0;
 #endif
@@ -1425,11 +1425,10 @@
 
 /*
  * recursively change the type of the mountpoint.
- * noinline this do_mount helper to save do_mount stack space.
  */
-static noinline int do_change_type(struct nameidata *nd, int flag)
+static int do_change_type(struct path *path, int flag)
 {
-	struct vfsmount *m, *mnt = nd->path.mnt;
+	struct vfsmount *m, *mnt = path->mnt;
 	int recurse = flag & MS_REC;
 	int type = flag & ~MS_REC;
 	int err = 0;
@@ -1437,7 +1436,7 @@
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	if (nd->path.dentry != nd->path.mnt->mnt_root)
+	if (path->dentry != path->mnt->mnt_root)
 		return -EINVAL;
 
 	down_write(&namespace_sem);
@@ -1459,40 +1458,39 @@
 
 /*
  * do loopback mount.
- * noinline this do_mount helper to save do_mount stack space.
  */
-static noinline int do_loopback(struct nameidata *nd, char *old_name,
+static int do_loopback(struct path *path, char *old_name,
 				int recurse)
 {
-	struct nameidata old_nd;
+	struct path old_path;
 	struct vfsmount *mnt = NULL;
-	int err = mount_is_safe(nd);
+	int err = mount_is_safe(path);
 	if (err)
 		return err;
 	if (!old_name || !*old_name)
 		return -EINVAL;
-	err = path_lookup(old_name, LOOKUP_FOLLOW, &old_nd);
+	err = kern_path(old_name, LOOKUP_FOLLOW, &old_path);
 	if (err)
 		return err;
 
 	down_write(&namespace_sem);
 	err = -EINVAL;
-	if (IS_MNT_UNBINDABLE(old_nd.path.mnt))
+	if (IS_MNT_UNBINDABLE(old_path.mnt))
 		goto out;
 
-	if (!check_mnt(nd->path.mnt) || !check_mnt(old_nd.path.mnt))
+	if (!check_mnt(path->mnt) || !check_mnt(old_path.mnt))
 		goto out;
 
 	err = -ENOMEM;
 	if (recurse)
-		mnt = copy_tree(old_nd.path.mnt, old_nd.path.dentry, 0);
+		mnt = copy_tree(old_path.mnt, old_path.dentry, 0);
 	else
-		mnt = clone_mnt(old_nd.path.mnt, old_nd.path.dentry, 0);
+		mnt = clone_mnt(old_path.mnt, old_path.dentry, 0);
 
 	if (!mnt)
 		goto out;
 
-	err = graft_tree(mnt, &nd->path);
+	err = graft_tree(mnt, path);
 	if (err) {
 		LIST_HEAD(umount_list);
 		spin_lock(&vfsmount_lock);
@@ -1503,7 +1501,7 @@
 
 out:
 	up_write(&namespace_sem);
-	path_put(&old_nd.path);
+	path_put(&old_path);
 	return err;
 }
 
@@ -1528,33 +1526,37 @@
  * change filesystem flags. dir should be a physical root of filesystem.
  * If you've mounted a non-root directory somewhere and want to do remount
  * on it - tough luck.
- * noinline this do_mount helper to save do_mount stack space.
  */
-static noinline int do_remount(struct nameidata *nd, int flags, int mnt_flags,
+static int do_remount(struct path *path, int flags, int mnt_flags,
 		      void *data)
 {
 	int err;
-	struct super_block *sb = nd->path.mnt->mnt_sb;
+	struct super_block *sb = path->mnt->mnt_sb;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	if (!check_mnt(nd->path.mnt))
+	if (!check_mnt(path->mnt))
 		return -EINVAL;
 
-	if (nd->path.dentry != nd->path.mnt->mnt_root)
+	if (path->dentry != path->mnt->mnt_root)
 		return -EINVAL;
 
 	down_write(&sb->s_umount);
 	if (flags & MS_BIND)
-		err = change_mount_flags(nd->path.mnt, flags);
+		err = change_mount_flags(path->mnt, flags);
 	else
 		err = do_remount_sb(sb, flags, data, 0);
 	if (!err)
-		nd->path.mnt->mnt_flags = mnt_flags;
+		path->mnt->mnt_flags = mnt_flags;
 	up_write(&sb->s_umount);
-	if (!err)
-		security_sb_post_remount(nd->path.mnt, flags, data);
+	if (!err) {
+		security_sb_post_remount(path->mnt, flags, data);
+
+		spin_lock(&vfsmount_lock);
+		touch_mnt_namespace(path->mnt->mnt_ns);
+		spin_unlock(&vfsmount_lock);
+	}
 	return err;
 }
 
@@ -1568,90 +1570,85 @@
 	return 0;
 }
 
-/*
- * noinline this do_mount helper to save do_mount stack space.
- */
-static noinline int do_move_mount(struct nameidata *nd, char *old_name)
+static int do_move_mount(struct path *path, char *old_name)
 {
-	struct nameidata old_nd;
-	struct path parent_path;
+	struct path old_path, parent_path;
 	struct vfsmount *p;
 	int err = 0;
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 	if (!old_name || !*old_name)
 		return -EINVAL;
-	err = path_lookup(old_name, LOOKUP_FOLLOW, &old_nd);
+	err = kern_path(old_name, LOOKUP_FOLLOW, &old_path);
 	if (err)
 		return err;
 
 	down_write(&namespace_sem);
-	while (d_mountpoint(nd->path.dentry) &&
-	       follow_down(&nd->path.mnt, &nd->path.dentry))
+	while (d_mountpoint(path->dentry) &&
+	       follow_down(&path->mnt, &path->dentry))
 		;
 	err = -EINVAL;
-	if (!check_mnt(nd->path.mnt) || !check_mnt(old_nd.path.mnt))
+	if (!check_mnt(path->mnt) || !check_mnt(old_path.mnt))
 		goto out;
 
 	err = -ENOENT;
-	mutex_lock(&nd->path.dentry->d_inode->i_mutex);
-	if (IS_DEADDIR(nd->path.dentry->d_inode))
+	mutex_lock(&path->dentry->d_inode->i_mutex);
+	if (IS_DEADDIR(path->dentry->d_inode))
 		goto out1;
 
-	if (!IS_ROOT(nd->path.dentry) && d_unhashed(nd->path.dentry))
+	if (!IS_ROOT(path->dentry) && d_unhashed(path->dentry))
 		goto out1;
 
 	err = -EINVAL;
-	if (old_nd.path.dentry != old_nd.path.mnt->mnt_root)
+	if (old_path.dentry != old_path.mnt->mnt_root)
 		goto out1;
 
-	if (old_nd.path.mnt == old_nd.path.mnt->mnt_parent)
+	if (old_path.mnt == old_path.mnt->mnt_parent)
 		goto out1;
 
-	if (S_ISDIR(nd->path.dentry->d_inode->i_mode) !=
-	      S_ISDIR(old_nd.path.dentry->d_inode->i_mode))
+	if (S_ISDIR(path->dentry->d_inode->i_mode) !=
+	      S_ISDIR(old_path.dentry->d_inode->i_mode))
 		goto out1;
 	/*
 	 * Don't move a mount residing in a shared parent.
 	 */
-	if (old_nd.path.mnt->mnt_parent &&
-	    IS_MNT_SHARED(old_nd.path.mnt->mnt_parent))
+	if (old_path.mnt->mnt_parent &&
+	    IS_MNT_SHARED(old_path.mnt->mnt_parent))
 		goto out1;
 	/*
 	 * Don't move a mount tree containing unbindable mounts to a destination
 	 * mount which is shared.
 	 */
-	if (IS_MNT_SHARED(nd->path.mnt) &&
-	    tree_contains_unbindable(old_nd.path.mnt))
+	if (IS_MNT_SHARED(path->mnt) &&
+	    tree_contains_unbindable(old_path.mnt))
 		goto out1;
 	err = -ELOOP;
-	for (p = nd->path.mnt; p->mnt_parent != p; p = p->mnt_parent)
-		if (p == old_nd.path.mnt)
+	for (p = path->mnt; p->mnt_parent != p; p = p->mnt_parent)
+		if (p == old_path.mnt)
 			goto out1;
 
-	err = attach_recursive_mnt(old_nd.path.mnt, &nd->path, &parent_path);
+	err = attach_recursive_mnt(old_path.mnt, path, &parent_path);
 	if (err)
 		goto out1;
 
 	/* if the mount is moved, it should no longer be expire
 	 * automatically */
-	list_del_init(&old_nd.path.mnt->mnt_expire);
+	list_del_init(&old_path.mnt->mnt_expire);
 out1:
-	mutex_unlock(&nd->path.dentry->d_inode->i_mutex);
+	mutex_unlock(&path->dentry->d_inode->i_mutex);
 out:
 	up_write(&namespace_sem);
 	if (!err)
 		path_put(&parent_path);
-	path_put(&old_nd.path);
+	path_put(&old_path);
 	return err;
 }
 
 /*
  * create a new mount for userspace and request it to be added into the
  * namespace's tree
- * noinline this do_mount helper to save do_mount stack space.
  */
-static noinline int do_new_mount(struct nameidata *nd, char *type, int flags,
+static int do_new_mount(struct path *path, char *type, int flags,
 			int mnt_flags, char *name, void *data)
 {
 	struct vfsmount *mnt;
@@ -1667,7 +1664,7 @@
 	if (IS_ERR(mnt))
 		return PTR_ERR(mnt);
 
-	return do_add_mount(mnt, &nd->path, mnt_flags, NULL);
+	return do_add_mount(mnt, path, mnt_flags, NULL);
 }
 
 /*
@@ -1902,7 +1899,7 @@
 long do_mount(char *dev_name, char *dir_name, char *type_page,
 		  unsigned long flags, void *data_page)
 {
-	struct nameidata nd;
+	struct path path;
 	int retval = 0;
 	int mnt_flags = 0;
 
@@ -1940,29 +1937,29 @@
 		   MS_NOATIME | MS_NODIRATIME | MS_RELATIME| MS_KERNMOUNT);
 
 	/* ... and get the mountpoint */
-	retval = path_lookup(dir_name, LOOKUP_FOLLOW, &nd);
+	retval = kern_path(dir_name, LOOKUP_FOLLOW, &path);
 	if (retval)
 		return retval;
 
-	retval = security_sb_mount(dev_name, &nd.path,
+	retval = security_sb_mount(dev_name, &path,
 				   type_page, flags, data_page);
 	if (retval)
 		goto dput_out;
 
 	if (flags & MS_REMOUNT)
-		retval = do_remount(&nd, flags & ~MS_REMOUNT, mnt_flags,
+		retval = do_remount(&path, flags & ~MS_REMOUNT, mnt_flags,
 				    data_page);
 	else if (flags & MS_BIND)
-		retval = do_loopback(&nd, dev_name, flags & MS_REC);
+		retval = do_loopback(&path, dev_name, flags & MS_REC);
 	else if (flags & (MS_SHARED | MS_PRIVATE | MS_SLAVE | MS_UNBINDABLE))
-		retval = do_change_type(&nd, flags);
+		retval = do_change_type(&path, flags);
 	else if (flags & MS_MOVE)
-		retval = do_move_mount(&nd, dev_name);
+		retval = do_move_mount(&path, dev_name);
 	else
-		retval = do_new_mount(&nd, type_page, flags, mnt_flags,
+		retval = do_new_mount(&path, type_page, flags, mnt_flags,
 				      dev_name, data_page);
 dput_out:
-	path_put(&nd.path);
+	path_put(&path);
 	return retval;
 }
 
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index efdba2e..3e64b98 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -707,9 +707,7 @@
 {
 	if (NFS_PROTO(dir)->version == 2)
 		return 0;
-	if (nd == NULL || nfs_lookup_check_intent(nd, LOOKUP_CREATE) == 0)
-		return 0;
-	return (nd->intent.open.flags & O_EXCL) != 0;
+	return nd && nfs_lookup_check_intent(nd, LOOKUP_EXCL);
 }
 
 /*
@@ -1009,7 +1007,7 @@
 
 	/* Let vfs_create() deal with O_EXCL. Instantiate, but don't hash
 	 * the dentry. */
-	if (nd->intent.open.flags & O_EXCL) {
+	if (nd->flags & LOOKUP_EXCL) {
 		d_instantiate(dentry, NULL);
 		goto out;
 	}
@@ -1959,6 +1957,9 @@
 	} else
 		res = PTR_ERR(cred);
 out:
+	if (!res && (mask & MAY_EXEC) && !execute_ok(inode))
+		res = -EACCES;
+
 	dfprintk(VFS, "NFS: permission(%s/%ld), mask=0x%x, res=%d\n",
 		inode->i_sb->s_id, inode->i_ino, mask, res);
 	return res;
diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c
index fae9719..b7c9b2d 100644
--- a/fs/nfs/getroot.c
+++ b/fs/nfs/getroot.c
@@ -107,11 +107,10 @@
 	 * if the dentry tree reaches them; however if the dentry already
 	 * exists, we'll pick it up at this point and use it as the root
 	 */
-	mntroot = d_alloc_anon(inode);
-	if (!mntroot) {
-		iput(inode);
+	mntroot = d_obtain_alias(inode);
+	if (IS_ERR(mntroot)) {
 		dprintk("nfs_get_root: get root dentry failed\n");
-		return ERR_PTR(-ENOMEM);
+		return mntroot;
 	}
 
 	security_d_instantiate(mntroot, inode);
@@ -277,11 +276,10 @@
 	 * if the dentry tree reaches them; however if the dentry already
 	 * exists, we'll pick it up at this point and use it as the root
 	 */
-	mntroot = d_alloc_anon(inode);
-	if (!mntroot) {
-		iput(inode);
+	mntroot = d_obtain_alias(inode);
+	if (IS_ERR(mntroot)) {
 		dprintk("nfs_get_root: get root dentry failed\n");
-		return ERR_PTR(-ENOMEM);
+		return mntroot;
 	}
 
 	security_d_instantiate(mntroot, inode);
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index b9195c0..dc52793 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -5,7 +5,7 @@
  *
  *  nfs inode and superblock handling functions
  *
- *  Modularised by Alan Cox <Alan.Cox@linux.org>, while hacking some
+ *  Modularised by Alan Cox <alan@lxorguk.ukuu.org.uk>, while hacking some
  *  experimental NFS changes. Modularisation taken straight from SYS5 fs.
  *
  *  Change to nfs_read_super() to permit NFS mounts to multi-homed hosts.
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index a3b0061..f48db67 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -5,7 +5,7 @@
  *
  *  nfs superblock handling functions
  *
- *  Modularised by Alan Cox <Alan.Cox@linux.org>, while hacking some
+ *  Modularised by Alan Cox <alan@lxorguk.ukuu.org.uk>, while hacking some
  *  experimental NFS changes. Modularisation taken straight from SYS5 fs.
  *
  *  Change to nfs_read_super() to permit NFS mounts to multi-homed hosts.
diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c
index 9dc036f..5839b22 100644
--- a/fs/nfsd/export.c
+++ b/fs/nfsd/export.c
@@ -99,7 +99,7 @@
 	int fsidtype;
 	char *ep;
 	struct svc_expkey key;
-	struct svc_expkey *ek;
+	struct svc_expkey *ek = NULL;
 
 	if (mesg[mlen-1] != '\n')
 		return -EINVAL;
@@ -107,7 +107,8 @@
 
 	buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
 	err = -ENOMEM;
-	if (!buf) goto out;
+	if (!buf)
+		goto out;
 
 	err = -EINVAL;
 	if ((len=qword_get(&mesg, buf, PAGE_SIZE)) <= 0)
@@ -151,34 +152,32 @@
 
 	/* now we want a pathname, or empty meaning NEGATIVE  */
 	err = -EINVAL;
-	if ((len=qword_get(&mesg, buf, PAGE_SIZE)) < 0)
+	len = qword_get(&mesg, buf, PAGE_SIZE);
+	if (len < 0)
 		goto out;
 	dprintk("Path seems to be <%s>\n", buf);
 	err = 0;
 	if (len == 0) {
 		set_bit(CACHE_NEGATIVE, &key.h.flags);
 		ek = svc_expkey_update(&key, ek);
-		if (ek)
-			cache_put(&ek->h, &svc_expkey_cache);
-		else err = -ENOMEM;
+		if (!ek)
+			err = -ENOMEM;
 	} else {
-		struct nameidata nd;
-		err = path_lookup(buf, 0, &nd);
+		err = kern_path(buf, 0, &key.ek_path);
 		if (err)
 			goto out;
 
 		dprintk("Found the path %s\n", buf);
-		key.ek_path = nd.path;
 
 		ek = svc_expkey_update(&key, ek);
-		if (ek)
-			cache_put(&ek->h, &svc_expkey_cache);
-		else
+		if (!ek)
 			err = -ENOMEM;
-		path_put(&nd.path);
+		path_put(&key.ek_path);
 	}
 	cache_flush();
  out:
+	if (ek)
+		cache_put(&ek->h, &svc_expkey_cache);
 	if (dom)
 		auth_domain_put(dom);
 	kfree(buf);
@@ -500,35 +499,22 @@
 	int len;
 	int err;
 	struct auth_domain *dom = NULL;
-	struct nameidata nd;
-	struct svc_export exp, *expp;
+	struct svc_export exp = {}, *expp;
 	int an_int;
 
-	nd.path.dentry = NULL;
-	exp.ex_pathname = NULL;
-
-	/* fs locations */
-	exp.ex_fslocs.locations = NULL;
-	exp.ex_fslocs.locations_count = 0;
-	exp.ex_fslocs.migrated = 0;
-
-	exp.ex_uuid = NULL;
-
-	/* secinfo */
-	exp.ex_nflavors = 0;
-
 	if (mesg[mlen-1] != '\n')
 		return -EINVAL;
 	mesg[mlen-1] = 0;
 
 	buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
-	err = -ENOMEM;
-	if (!buf) goto out;
+	if (!buf)
+		return -ENOMEM;
 
 	/* client */
-	len = qword_get(&mesg, buf, PAGE_SIZE);
 	err = -EINVAL;
-	if (len <= 0) goto out;
+	len = qword_get(&mesg, buf, PAGE_SIZE);
+	if (len <= 0)
+		goto out;
 
 	err = -ENOENT;
 	dom = auth_domain_find(buf);
@@ -537,25 +523,25 @@
 
 	/* path */
 	err = -EINVAL;
-	if ((len=qword_get(&mesg, buf, PAGE_SIZE)) <= 0)
-		goto out;
-	err = path_lookup(buf, 0, &nd);
-	if (err) goto out_no_path;
+	if ((len = qword_get(&mesg, buf, PAGE_SIZE)) <= 0)
+		goto out1;
 
-	exp.h.flags = 0;
+	err = kern_path(buf, 0, &exp.ex_path);
+	if (err)
+		goto out1;
+
 	exp.ex_client = dom;
-	exp.ex_path.mnt = nd.path.mnt;
-	exp.ex_path.dentry = nd.path.dentry;
-	exp.ex_pathname = kstrdup(buf, GFP_KERNEL);
+
 	err = -ENOMEM;
+	exp.ex_pathname = kstrdup(buf, GFP_KERNEL);
 	if (!exp.ex_pathname)
-		goto out;
+		goto out2;
 
 	/* expiry */
 	err = -EINVAL;
 	exp.h.expiry_time = get_expiry(&mesg);
 	if (exp.h.expiry_time == 0)
-		goto out;
+		goto out3;
 
 	/* flags */
 	err = get_int(&mesg, &an_int);
@@ -563,22 +549,26 @@
 		err = 0;
 		set_bit(CACHE_NEGATIVE, &exp.h.flags);
 	} else {
-		if (err || an_int < 0) goto out;	
+		if (err || an_int < 0)
+			goto out3;
 		exp.ex_flags= an_int;
 	
 		/* anon uid */
 		err = get_int(&mesg, &an_int);
-		if (err) goto out;
+		if (err)
+			goto out3;
 		exp.ex_anon_uid= an_int;
 
 		/* anon gid */
 		err = get_int(&mesg, &an_int);
-		if (err) goto out;
+		if (err)
+			goto out3;
 		exp.ex_anon_gid= an_int;
 
 		/* fsid */
 		err = get_int(&mesg, &an_int);
-		if (err) goto out;
+		if (err)
+			goto out3;
 		exp.ex_fsid = an_int;
 
 		while ((len = qword_get(&mesg, buf, PAGE_SIZE)) > 0) {
@@ -604,12 +594,13 @@
 				 */
 				break;
 			if (err)
-				goto out;
+				goto out4;
 		}
 
-		err = check_export(nd.path.dentry->d_inode, exp.ex_flags,
+		err = check_export(exp.ex_path.dentry->d_inode, exp.ex_flags,
 				   exp.ex_uuid);
-		if (err) goto out;
+		if (err)
+			goto out4;
 	}
 
 	expp = svc_export_lookup(&exp);
@@ -622,15 +613,16 @@
 		err = -ENOMEM;
 	else
 		exp_put(expp);
- out:
+out4:
 	nfsd4_fslocs_free(&exp.ex_fslocs);
 	kfree(exp.ex_uuid);
+out3:
 	kfree(exp.ex_pathname);
-	if (nd.path.dentry)
-		path_put(&nd.path);
- out_no_path:
-	if (dom)
-		auth_domain_put(dom);
+out2:
+	path_put(&exp.ex_path);
+out1:
+	auth_domain_put(dom);
+out:
 	kfree(buf);
 	return err;
 }
@@ -998,7 +990,7 @@
 	struct svc_export	*exp = NULL;
 	struct svc_export	new;
 	struct svc_expkey	*fsid_key = NULL;
-	struct nameidata nd;
+	struct path path;
 	int		err;
 
 	/* Consistency check */
@@ -1021,12 +1013,12 @@
 
 
 	/* Look up the dentry */
-	err = path_lookup(nxp->ex_path, 0, &nd);
+	err = kern_path(nxp->ex_path, 0, &path);
 	if (err)
 		goto out_put_clp;
 	err = -EINVAL;
 
-	exp = exp_get_by_name(clp, nd.path.mnt, nd.path.dentry, NULL);
+	exp = exp_get_by_name(clp, path.mnt, path.dentry, NULL);
 
 	memset(&new, 0, sizeof(new));
 
@@ -1034,8 +1026,8 @@
 	if ((nxp->ex_flags & NFSEXP_FSID) &&
 	    (!IS_ERR(fsid_key = exp_get_fsid_key(clp, nxp->ex_dev))) &&
 	    fsid_key->ek_path.mnt &&
-	    (fsid_key->ek_path.mnt != nd.path.mnt ||
-	     fsid_key->ek_path.dentry != nd.path.dentry))
+	    (fsid_key->ek_path.mnt != path.mnt ||
+	     fsid_key->ek_path.dentry != path.dentry))
 		goto finish;
 
 	if (!IS_ERR(exp)) {
@@ -1051,7 +1043,7 @@
 		goto finish;
 	}
 
-	err = check_export(nd.path.dentry->d_inode, nxp->ex_flags, NULL);
+	err = check_export(path.dentry->d_inode, nxp->ex_flags, NULL);
 	if (err) goto finish;
 
 	err = -ENOMEM;
@@ -1064,7 +1056,7 @@
 	if (!new.ex_pathname)
 		goto finish;
 	new.ex_client = clp;
-	new.ex_path = nd.path;
+	new.ex_path = path;
 	new.ex_flags = nxp->ex_flags;
 	new.ex_anon_uid = nxp->ex_anon_uid;
 	new.ex_anon_gid = nxp->ex_anon_gid;
@@ -1090,7 +1082,7 @@
 		exp_put(exp);
 	if (fsid_key && !IS_ERR(fsid_key))
 		cache_put(&fsid_key->h, &svc_expkey_cache);
-	path_put(&nd.path);
+	path_put(&path);
 out_put_clp:
 	auth_domain_put(clp);
 out_unlock:
@@ -1121,7 +1113,7 @@
 {
 	struct auth_domain *dom;
 	svc_export *exp;
-	struct nameidata nd;
+	struct path path;
 	int		err;
 
 	/* Consistency check */
@@ -1138,13 +1130,13 @@
 		goto out_unlock;
 	}
 
-	err = path_lookup(nxp->ex_path, 0, &nd);
+	err = kern_path(nxp->ex_path, 0, &path);
 	if (err)
 		goto out_domain;
 
 	err = -EINVAL;
-	exp = exp_get_by_name(dom, nd.path.mnt, nd.path.dentry, NULL);
-	path_put(&nd.path);
+	exp = exp_get_by_name(dom, path.mnt, path.dentry, NULL);
+	path_put(&path);
 	if (IS_ERR(exp))
 		goto out_domain;
 
@@ -1166,26 +1158,26 @@
  * since its harder to fool a kernel module than a user space program.
  */
 int
-exp_rootfh(svc_client *clp, char *path, struct knfsd_fh *f, int maxsize)
+exp_rootfh(svc_client *clp, char *name, struct knfsd_fh *f, int maxsize)
 {
 	struct svc_export	*exp;
-	struct nameidata	nd;
+	struct path		path;
 	struct inode		*inode;
 	struct svc_fh		fh;
 	int			err;
 
 	err = -EPERM;
 	/* NB: we probably ought to check that it's NUL-terminated */
-	if (path_lookup(path, 0, &nd)) {
-		printk("nfsd: exp_rootfh path not found %s", path);
+	if (kern_path(name, 0, &path)) {
+		printk("nfsd: exp_rootfh path not found %s", name);
 		return err;
 	}
-	inode = nd.path.dentry->d_inode;
+	inode = path.dentry->d_inode;
 
 	dprintk("nfsd: exp_rootfh(%s [%p] %s:%s/%ld)\n",
-		 path, nd.path.dentry, clp->name,
+		 name, path.dentry, clp->name,
 		 inode->i_sb->s_id, inode->i_ino);
-	exp = exp_parent(clp, nd.path.mnt, nd.path.dentry, NULL);
+	exp = exp_parent(clp, path.mnt, path.dentry, NULL);
 	if (IS_ERR(exp)) {
 		err = PTR_ERR(exp);
 		goto out;
@@ -1195,7 +1187,7 @@
 	 * fh must be initialized before calling fh_compose
 	 */
 	fh_init(&fh, maxsize);
-	if (fh_compose(&fh, exp, nd.path.dentry, NULL))
+	if (fh_compose(&fh, exp, path.dentry, NULL))
 		err = -EINVAL;
 	else
 		err = 0;
@@ -1203,7 +1195,7 @@
 	fh_put(&fh);
 	exp_put(exp);
 out:
-	path_put(&nd.path);
+	path_put(&path);
 	return err;
 }
 
diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c
index 145b3c8..bb93946 100644
--- a/fs/nfsd/nfs4recover.c
+++ b/fs/nfsd/nfs4recover.c
@@ -51,7 +51,7 @@
 #define NFSDDBG_FACILITY                NFSDDBG_PROC
 
 /* Globals */
-static struct nameidata rec_dir;
+static struct path rec_dir;
 static int rec_dir_init = 0;
 
 static void
@@ -121,9 +121,9 @@
 static void
 nfsd4_sync_rec_dir(void)
 {
-	mutex_lock(&rec_dir.path.dentry->d_inode->i_mutex);
-	nfsd_sync_dir(rec_dir.path.dentry);
-	mutex_unlock(&rec_dir.path.dentry->d_inode->i_mutex);
+	mutex_lock(&rec_dir.dentry->d_inode->i_mutex);
+	nfsd_sync_dir(rec_dir.dentry);
+	mutex_unlock(&rec_dir.dentry->d_inode->i_mutex);
 }
 
 int
@@ -143,9 +143,9 @@
 	nfs4_save_user(&uid, &gid);
 
 	/* lock the parent */
-	mutex_lock(&rec_dir.path.dentry->d_inode->i_mutex);
+	mutex_lock(&rec_dir.dentry->d_inode->i_mutex);
 
-	dentry = lookup_one_len(dname, rec_dir.path.dentry, HEXDIR_LEN-1);
+	dentry = lookup_one_len(dname, rec_dir.dentry, HEXDIR_LEN-1);
 	if (IS_ERR(dentry)) {
 		status = PTR_ERR(dentry);
 		goto out_unlock;
@@ -155,15 +155,15 @@
 		dprintk("NFSD: nfsd4_create_clid_dir: DIRECTORY EXISTS\n");
 		goto out_put;
 	}
-	status = mnt_want_write(rec_dir.path.mnt);
+	status = mnt_want_write(rec_dir.mnt);
 	if (status)
 		goto out_put;
-	status = vfs_mkdir(rec_dir.path.dentry->d_inode, dentry, S_IRWXU);
-	mnt_drop_write(rec_dir.path.mnt);
+	status = vfs_mkdir(rec_dir.dentry->d_inode, dentry, S_IRWXU);
+	mnt_drop_write(rec_dir.mnt);
 out_put:
 	dput(dentry);
 out_unlock:
-	mutex_unlock(&rec_dir.path.dentry->d_inode->i_mutex);
+	mutex_unlock(&rec_dir.dentry->d_inode->i_mutex);
 	if (status == 0) {
 		clp->cl_firststate = 1;
 		nfsd4_sync_rec_dir();
@@ -226,7 +226,7 @@
 
 	nfs4_save_user(&uid, &gid);
 
-	filp = dentry_open(dget(dir), mntget(rec_dir.path.mnt), O_RDONLY);
+	filp = dentry_open(dget(dir), mntget(rec_dir.mnt), O_RDONLY);
 	status = PTR_ERR(filp);
 	if (IS_ERR(filp))
 		goto out;
@@ -291,9 +291,9 @@
 
 	dprintk("NFSD: nfsd4_unlink_clid_dir. name %.*s\n", namlen, name);
 
-	mutex_lock(&rec_dir.path.dentry->d_inode->i_mutex);
-	dentry = lookup_one_len(name, rec_dir.path.dentry, namlen);
-	mutex_unlock(&rec_dir.path.dentry->d_inode->i_mutex);
+	mutex_lock(&rec_dir.dentry->d_inode->i_mutex);
+	dentry = lookup_one_len(name, rec_dir.dentry, namlen);
+	mutex_unlock(&rec_dir.dentry->d_inode->i_mutex);
 	if (IS_ERR(dentry)) {
 		status = PTR_ERR(dentry);
 		return status;
@@ -302,7 +302,7 @@
 	if (!dentry->d_inode)
 		goto out;
 
-	status = nfsd4_clear_clid_dir(rec_dir.path.dentry, dentry);
+	status = nfsd4_clear_clid_dir(rec_dir.dentry, dentry);
 out:
 	dput(dentry);
 	return status;
@@ -318,7 +318,7 @@
 	if (!rec_dir_init || !clp->cl_firststate)
 		return;
 
-	status = mnt_want_write(rec_dir.path.mnt);
+	status = mnt_want_write(rec_dir.mnt);
 	if (status)
 		goto out;
 	clp->cl_firststate = 0;
@@ -327,7 +327,7 @@
 	nfs4_reset_user(uid, gid);
 	if (status == 0)
 		nfsd4_sync_rec_dir();
-	mnt_drop_write(rec_dir.path.mnt);
+	mnt_drop_write(rec_dir.mnt);
 out:
 	if (status)
 		printk("NFSD: Failed to remove expired client state directory"
@@ -357,17 +357,17 @@
 
 	if (!rec_dir_init)
 		return;
-	status = mnt_want_write(rec_dir.path.mnt);
+	status = mnt_want_write(rec_dir.mnt);
 	if (status)
 		goto out;
-	status = nfsd4_list_rec_dir(rec_dir.path.dentry, purge_old);
+	status = nfsd4_list_rec_dir(rec_dir.dentry, purge_old);
 	if (status == 0)
 		nfsd4_sync_rec_dir();
-	mnt_drop_write(rec_dir.path.mnt);
+	mnt_drop_write(rec_dir.mnt);
 out:
 	if (status)
 		printk("nfsd4: failed to purge old clients from recovery"
-			" directory %s\n", rec_dir.path.dentry->d_name.name);
+			" directory %s\n", rec_dir.dentry->d_name.name);
 }
 
 static int
@@ -387,10 +387,10 @@
 nfsd4_recdir_load(void) {
 	int status;
 
-	status = nfsd4_list_rec_dir(rec_dir.path.dentry, load_recdir);
+	status = nfsd4_list_rec_dir(rec_dir.dentry, load_recdir);
 	if (status)
 		printk("nfsd4: failed loading clients from recovery"
-			" directory %s\n", rec_dir.path.dentry->d_name.name);
+			" directory %s\n", rec_dir.dentry->d_name.name);
 	return status;
 }
 
@@ -412,7 +412,7 @@
 
 	nfs4_save_user(&uid, &gid);
 
-	status = path_lookup(rec_dirname, LOOKUP_FOLLOW | LOOKUP_DIRECTORY,
+	status = kern_path(rec_dirname, LOOKUP_FOLLOW | LOOKUP_DIRECTORY,
 			&rec_dir);
 	if (status)
 		printk("NFSD: unable to find recovery directory %s\n",
@@ -429,5 +429,5 @@
 	if (!rec_dir_init)
 		return;
 	rec_dir_init = 0;
-	path_put(&rec_dir.path);
+	path_put(&rec_dir);
 }
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 0cc7ff5..b0bebc5 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -3284,17 +3284,17 @@
 nfs4_reset_recoverydir(char *recdir)
 {
 	int status;
-	struct nameidata nd;
+	struct path path;
 
-	status = path_lookup(recdir, LOOKUP_FOLLOW, &nd);
+	status = kern_path(recdir, LOOKUP_FOLLOW, &path);
 	if (status)
 		return status;
 	status = -ENOTDIR;
-	if (S_ISDIR(nd.path.dentry->d_inode->i_mode)) {
+	if (S_ISDIR(path.dentry->d_inode->i_mode)) {
 		nfs4_set_recdir(recdir);
 		status = 0;
 	}
-	path_put(&nd.path);
+	path_put(&path);
 	return status;
 }
 
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index 97543df..e3f9783 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -341,7 +341,7 @@
 
 static ssize_t failover_unlock_fs(struct file *file, char *buf, size_t size)
 {
-	struct nameidata nd;
+	struct path path;
 	char *fo_path;
 	int error;
 
@@ -356,13 +356,13 @@
 	if (qword_get(&buf, fo_path, size) < 0)
 		return -EINVAL;
 
-	error = path_lookup(fo_path, 0, &nd);
+	error = kern_path(fo_path, 0, &path);
 	if (error)
 		return error;
 
-	error = nlmsvc_unlock_all_by_sb(nd.path.mnt->mnt_sb);
+	error = nlmsvc_unlock_all_by_sb(path.mnt->mnt_sb);
 
-	path_put(&nd.path);
+	path_put(&path);
 	return error;
 }
 
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index 59eeb46..07e4f5d 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -249,6 +249,10 @@
 	if (error < 0)
 		return error;
 
+	error = lockd_up();
+	if (error < 0)
+		return error;
+
 	error = svc_create_xprt(nfsd_serv, "tcp", port,
 					SVC_SOCK_DEFAULTS);
 	if (error < 0)
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index aa1d0d6..0bc56f6 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -410,6 +410,7 @@
 static ssize_t nfsd_getxattr(struct dentry *dentry, char *key, void **buf)
 {
 	ssize_t buflen;
+	ssize_t ret;
 
 	buflen = vfs_getxattr(dentry, key, NULL, 0);
 	if (buflen <= 0)
@@ -419,7 +420,10 @@
 	if (!*buf)
 		return -ENOMEM;
 
-	return vfs_getxattr(dentry, key, *buf, buflen);
+	ret = vfs_getxattr(dentry, key, *buf, buflen);
+	if (ret < 0)
+		kfree(*buf);
+	return ret;
 }
 #endif
 
@@ -1814,6 +1818,115 @@
 }
 
 /*
+ * We do this buffering because we must not call back into the file
+ * system's ->lookup() method from the filldir callback. That may well
+ * deadlock a number of file systems.
+ *
+ * This is based heavily on the implementation of same in XFS.
+ */
+struct buffered_dirent {
+	u64		ino;
+	loff_t		offset;
+	int		namlen;
+	unsigned int	d_type;
+	char		name[];
+};
+
+struct readdir_data {
+	char		*dirent;
+	size_t		used;
+	int		full;
+};
+
+static int nfsd_buffered_filldir(void *__buf, const char *name, int namlen,
+				 loff_t offset, u64 ino, unsigned int d_type)
+{
+	struct readdir_data *buf = __buf;
+	struct buffered_dirent *de = (void *)(buf->dirent + buf->used);
+	unsigned int reclen;
+
+	reclen = ALIGN(sizeof(struct buffered_dirent) + namlen, sizeof(u64));
+	if (buf->used + reclen > PAGE_SIZE) {
+		buf->full = 1;
+		return -EINVAL;
+	}
+
+	de->namlen = namlen;
+	de->offset = offset;
+	de->ino = ino;
+	de->d_type = d_type;
+	memcpy(de->name, name, namlen);
+	buf->used += reclen;
+
+	return 0;
+}
+
+static int nfsd_buffered_readdir(struct file *file, filldir_t func,
+				 struct readdir_cd *cdp, loff_t *offsetp)
+{
+	struct readdir_data buf;
+	struct buffered_dirent *de;
+	int host_err;
+	int size;
+	loff_t offset;
+
+	buf.dirent = (void *)__get_free_page(GFP_KERNEL);
+	if (!buf.dirent)
+		return -ENOMEM;
+
+	offset = *offsetp;
+	cdp->err = nfserr_eof; /* will be cleared on successful read */
+
+	while (1) {
+		unsigned int reclen;
+
+		buf.used = 0;
+		buf.full = 0;
+
+		host_err = vfs_readdir(file, nfsd_buffered_filldir, &buf);
+		if (buf.full)
+			host_err = 0;
+
+		if (host_err < 0)
+			break;
+
+		size = buf.used;
+
+		if (!size)
+			break;
+
+		de = (struct buffered_dirent *)buf.dirent;
+		while (size > 0) {
+			offset = de->offset;
+
+			if (func(cdp, de->name, de->namlen, de->offset,
+				 de->ino, de->d_type))
+				goto done;
+
+			if (cdp->err != nfs_ok)
+				goto done;
+
+			reclen = ALIGN(sizeof(*de) + de->namlen,
+				       sizeof(u64));
+			size -= reclen;
+			de = (struct buffered_dirent *)((char *)de + reclen);
+		}
+		offset = vfs_llseek(file, 0, SEEK_CUR);
+		if (!buf.full)
+			break;
+	}
+
+ done:
+	free_page((unsigned long)(buf.dirent));
+
+	if (host_err)
+		return nfserrno(host_err);
+
+	*offsetp = offset;
+	return cdp->err;
+}
+
+/*
  * Read entries from a directory.
  * The  NFSv3/4 verifier we ignore for now.
  */
@@ -1822,7 +1935,6 @@
 	     struct readdir_cd *cdp, filldir_t func)
 {
 	__be32		err;
-	int 		host_err;
 	struct file	*file;
 	loff_t		offset = *offsetp;
 
@@ -1836,21 +1948,7 @@
 		goto out_close;
 	}
 
-	/*
-	 * Read the directory entries. This silly loop is necessary because
-	 * readdir() is not guaranteed to fill up the entire buffer, but
-	 * may choose to do less.
-	 */
-
-	do {
-		cdp->err = nfserr_eof; /* will be cleared on successful read */
-		host_err = vfs_readdir(file, func, cdp);
-	} while (host_err >=0 && cdp->err == nfs_ok);
-	if (host_err)
-		err = nfserrno(host_err);
-	else
-		err = cdp->err;
-	*offsetp = vfs_llseek(file, 0, 1);
+	err = nfsd_buffered_readdir(file, func, cdp, offsetp);
 
 	if (err == nfserr_eof || err == nfserr_toosmall)
 		err = nfs_ok; /* can still be found in ->err */
diff --git a/fs/ntfs/namei.c b/fs/ntfs/namei.c
index 9e8a95b..2ca0015 100644
--- a/fs/ntfs/namei.c
+++ b/fs/ntfs/namei.c
@@ -304,8 +304,6 @@
 	ntfs_attr_search_ctx *ctx;
 	ATTR_RECORD *attr;
 	FILE_NAME_ATTR *fn;
-	struct inode *parent_vi;
-	struct dentry *parent_dent;
 	unsigned long parent_ino;
 	int err;
 
@@ -345,24 +343,8 @@
 	/* Release the search context and the mft record of the child. */
 	ntfs_attr_put_search_ctx(ctx);
 	unmap_mft_record(ni);
-	/* Get the inode of the parent directory. */
-	parent_vi = ntfs_iget(vi->i_sb, parent_ino);
-	if (IS_ERR(parent_vi) || unlikely(is_bad_inode(parent_vi))) {
-		if (!IS_ERR(parent_vi))
-			iput(parent_vi);
-		ntfs_error(vi->i_sb, "Failed to get parent directory inode "
-				"0x%lx of child inode 0x%lx.", parent_ino,
-				vi->i_ino);
-		return ERR_PTR(-EACCES);
-	}
-	/* Finally get a dentry for the parent directory and return it. */
-	parent_dent = d_alloc_anon(parent_vi);
-	if (unlikely(!parent_dent)) {
-		iput(parent_vi);
-		return ERR_PTR(-ENOMEM);
-	}
-	ntfs_debug("Done for inode 0x%lx.", vi->i_ino);
-	return parent_dent;
+
+	return d_obtain_alias(ntfs_iget(vi->i_sb, parent_ino));
 }
 
 static struct inode *ntfs_nfs_get_inode(struct super_block *sb,
diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index 7dce161..6ebaa58 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -976,7 +976,7 @@
 	}
 
 	if (reg->hr_bdev)
-		blkdev_put(reg->hr_bdev);
+		blkdev_put(reg->hr_bdev, FMODE_READ|FMODE_WRITE);
 
 	if (reg->hr_slots)
 		kfree(reg->hr_slots);
@@ -1268,7 +1268,7 @@
 		goto out;
 
 	reg->hr_bdev = I_BDEV(filp->f_mapping->host);
-	ret = blkdev_get(reg->hr_bdev, FMODE_WRITE | FMODE_READ, 0);
+	ret = blkdev_get(reg->hr_bdev, FMODE_WRITE | FMODE_READ);
 	if (ret) {
 		reg->hr_bdev = NULL;
 		goto out;
@@ -1358,7 +1358,7 @@
 		iput(inode);
 	if (ret < 0) {
 		if (reg->hr_bdev) {
-			blkdev_put(reg->hr_bdev);
+			blkdev_put(reg->hr_bdev, FMODE_READ|FMODE_WRITE);
 			reg->hr_bdev = NULL;
 		}
 	}
diff --git a/fs/ocfs2/export.c b/fs/ocfs2/export.c
index 67527ce..2f27b33 100644
--- a/fs/ocfs2/export.c
+++ b/fs/ocfs2/export.c
@@ -68,14 +68,9 @@
 		return ERR_PTR(-ESTALE);
 	}
 
-	result = d_alloc_anon(inode);
-
-	if (!result) {
-		iput(inode);
-		mlog_errno(-ENOMEM);
-		return ERR_PTR(-ENOMEM);
-	}
-	result->d_op = &ocfs2_dentry_ops;
+	result = d_obtain_alias(inode);
+	if (!IS_ERR(result))
+		result->d_op = &ocfs2_dentry_ops;
 
 	mlog_exit_ptr(result);
 	return result;
@@ -86,7 +81,6 @@
 	int status;
 	u64 blkno;
 	struct dentry *parent;
-	struct inode *inode;
 	struct inode *dir = child->d_inode;
 
 	mlog_entry("(0x%p, '%.*s')\n", child,
@@ -109,21 +103,9 @@
 		goto bail_unlock;
 	}
 
-	inode = ocfs2_iget(OCFS2_SB(dir->i_sb), blkno, 0, 0);
-	if (IS_ERR(inode)) {
-		mlog(ML_ERROR, "Unable to create inode %llu\n",
-		     (unsigned long long)blkno);
-		parent = ERR_PTR(-EACCES);
-		goto bail_unlock;
-	}
-
-	parent = d_alloc_anon(inode);
-	if (!parent) {
-		iput(inode);
-		parent = ERR_PTR(-ENOMEM);
-	}
-
-	parent->d_op = &ocfs2_dentry_ops;
+	parent = d_obtain_alias(ocfs2_iget(OCFS2_SB(dir->i_sb), blkno, 0, 0));
+	if (!IS_ERR(parent))
+		parent->d_op = &ocfs2_dentry_ops;
 
 bail_unlock:
 	ocfs2_inode_unlock(dir, 0);
diff --git a/fs/omfs/dir.c b/fs/omfs/dir.c
index c0757e9..c7275cf 100644
--- a/fs/omfs/dir.c
+++ b/fs/omfs/dir.c
@@ -501,4 +501,5 @@
 struct file_operations omfs_dir_operations = {
 	.read = generic_read_dir,
 	.readdir = omfs_readdir,
+	.llseek = generic_file_llseek,
 };
diff --git a/fs/open.c b/fs/open.c
index 5596049..83cdb9d 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -798,7 +798,7 @@
 	int error;
 
 	f->f_flags = flags;
-	f->f_mode = ((flags+1) & O_ACCMODE) | FMODE_LSEEK |
+	f->f_mode = (__force fmode_t)((flags+1) & O_ACCMODE) | FMODE_LSEEK |
 				FMODE_PREAD | FMODE_PWRITE;
 	inode = dentry->d_inode;
 	if (f->f_mode & FMODE_WRITE) {
diff --git a/fs/openpromfs/inode.c b/fs/openpromfs/inode.c
index 9f5b054..d41bdc7 100644
--- a/fs/openpromfs/inode.c
+++ b/fs/openpromfs/inode.c
@@ -167,6 +167,7 @@
 static const struct file_operations openprom_operations = {
 	.read		= generic_read_dir,
 	.readdir	= openpromfs_readdir,
+	.llseek		= generic_file_llseek,
 };
 
 static struct dentry *openpromfs_lookup(struct inode *, struct dentry *, struct nameidata *);
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index cfb0c80..633f7a0 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -485,10 +485,10 @@
 		goto exit;
 
 	bdev->bd_invalidated = 1;
-	err = blkdev_get(bdev, FMODE_READ, 0);
+	err = blkdev_get(bdev, FMODE_READ);
 	if (err < 0)
 		goto exit;
-	blkdev_put(bdev);
+	blkdev_put(bdev, FMODE_READ);
 
 exit:
 	/* announce disk after possible partitions are created */
diff --git a/fs/proc/Makefile b/fs/proc/Makefile
index ebaba02..63d9651 100644
--- a/fs/proc/Makefile
+++ b/fs/proc/Makefile
@@ -8,11 +8,20 @@
 proc-$(CONFIG_MMU)	:= mmu.o task_mmu.o
 
 proc-y       += inode.o root.o base.o generic.o array.o \
-		proc_tty.o proc_misc.o
-
+		proc_tty.o
+proc-y	+= cmdline.o
+proc-y	+= cpuinfo.o
+proc-y	+= devices.o
+proc-y	+= interrupts.o
+proc-y	+= loadavg.o
+proc-y	+= meminfo.o
+proc-y	+= stat.o
+proc-y	+= uptime.o
+proc-y	+= version.o
 proc-$(CONFIG_PROC_SYSCTL)	+= proc_sysctl.o
 proc-$(CONFIG_NET)		+= proc_net.o
 proc-$(CONFIG_PROC_KCORE)	+= kcore.o
 proc-$(CONFIG_PROC_VMCORE)	+= vmcore.o
 proc-$(CONFIG_PROC_DEVICETREE)	+= proc_devtree.o
 proc-$(CONFIG_PRINTK)	+= kmsg.o
+proc-$(CONFIG_PROC_PAGE_MONITOR)	+= page.o
diff --git a/fs/proc/array.c b/fs/proc/array.c
index bb9f4b0..6af7fba 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -40,7 +40,7 @@
  *
  *
  * Alan Cox	     :  security fixes.
- *			<Alan.Cox@linux.org>
+ *			<alan@lxorguk.ukuu.org.uk>
  *
  * Al Viro           :  safe handling of mm_struct
  *
diff --git a/fs/proc/base.c b/fs/proc/base.c
index b5918ae..486cf3f 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1712,9 +1712,9 @@
 	file = fcheck_files(files, fd);
 	if (!file)
 		goto out_unlock;
-	if (file->f_mode & 1)
+	if (file->f_mode & FMODE_READ)
 		inode->i_mode |= S_IRUSR | S_IXUSR;
-	if (file->f_mode & 2)
+	if (file->f_mode & FMODE_WRITE)
 		inode->i_mode |= S_IWUSR | S_IXUSR;
 	spin_unlock(&files->file_lock);
 	put_files_struct(files);
diff --git a/fs/proc/cmdline.c b/fs/proc/cmdline.c
new file mode 100644
index 0000000..82676e3
--- /dev/null
+++ b/fs/proc/cmdline.c
@@ -0,0 +1,29 @@
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
+static int cmdline_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "%s\n", saved_command_line);
+	return 0;
+}
+
+static int cmdline_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cmdline_proc_show, NULL);
+}
+
+static const struct file_operations cmdline_proc_fops = {
+	.open		= cmdline_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_cmdline_init(void)
+{
+	proc_create("cmdline", 0, NULL, &cmdline_proc_fops);
+	return 0;
+}
+module_init(proc_cmdline_init);
diff --git a/fs/proc/cpuinfo.c b/fs/proc/cpuinfo.c
new file mode 100644
index 0000000..5a1e539
--- /dev/null
+++ b/fs/proc/cpuinfo.c
@@ -0,0 +1,24 @@
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
+extern const struct seq_operations cpuinfo_op;
+static int cpuinfo_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &cpuinfo_op);
+}
+
+static const struct file_operations proc_cpuinfo_operations = {
+	.open		= cpuinfo_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int __init proc_cpuinfo_init(void)
+{
+	proc_create("cpuinfo", 0, NULL, &proc_cpuinfo_operations);
+	return 0;
+}
+module_init(proc_cpuinfo_init);
diff --git a/fs/proc/devices.c b/fs/proc/devices.c
new file mode 100644
index 0000000..59ee7da
--- /dev/null
+++ b/fs/proc/devices.c
@@ -0,0 +1,70 @@
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
+static int devinfo_show(struct seq_file *f, void *v)
+{
+	int i = *(loff_t *) v;
+
+	if (i < CHRDEV_MAJOR_HASH_SIZE) {
+		if (i == 0)
+			seq_printf(f, "Character devices:\n");
+		chrdev_show(f, i);
+	}
+#ifdef CONFIG_BLOCK
+	else {
+		i -= CHRDEV_MAJOR_HASH_SIZE;
+		if (i == 0)
+			seq_printf(f, "\nBlock devices:\n");
+		blkdev_show(f, i);
+	}
+#endif
+	return 0;
+}
+
+static void *devinfo_start(struct seq_file *f, loff_t *pos)
+{
+	if (*pos < (BLKDEV_MAJOR_HASH_SIZE + CHRDEV_MAJOR_HASH_SIZE))
+		return pos;
+	return NULL;
+}
+
+static void *devinfo_next(struct seq_file *f, void *v, loff_t *pos)
+{
+	(*pos)++;
+	if (*pos >= (BLKDEV_MAJOR_HASH_SIZE + CHRDEV_MAJOR_HASH_SIZE))
+		return NULL;
+	return pos;
+}
+
+static void devinfo_stop(struct seq_file *f, void *v)
+{
+	/* Nothing to do */
+}
+
+static const struct seq_operations devinfo_ops = {
+	.start = devinfo_start,
+	.next  = devinfo_next,
+	.stop  = devinfo_stop,
+	.show  = devinfo_show
+};
+
+static int devinfo_open(struct inode *inode, struct file *filp)
+{
+	return seq_open(filp, &devinfo_ops);
+}
+
+static const struct file_operations proc_devinfo_operations = {
+	.open		= devinfo_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int __init proc_devices_init(void)
+{
+	proc_create("devices", 0, NULL, &proc_devinfo_operations);
+	return 0;
+}
+module_init(proc_devices_init);
diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 7821589..60a359b 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -547,9 +547,8 @@
 
 	for (tmp = dir->subdir; tmp; tmp = tmp->next)
 		if (strcmp(tmp->name, dp->name) == 0) {
-			printk(KERN_WARNING "proc_dir_entry '%s/%s' already registered\n",
+			WARN(1, KERN_WARNING "proc_dir_entry '%s/%s' already registered\n",
 				dir->name, dp->name);
-			dump_stack();
 			break;
 		}
 
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index c6b4fa7..2543fd0 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -106,14 +106,13 @@
 	inode_init_once(&ei->vfs_inode);
 }
 
-int __init proc_init_inodecache(void)
+void __init proc_init_inodecache(void)
 {
 	proc_inode_cachep = kmem_cache_create("proc_inode_cache",
 					     sizeof(struct proc_inode),
 					     0, (SLAB_RECLAIM_ACCOUNT|
 						SLAB_MEM_SPREAD|SLAB_PANIC),
 					     init_once);
-	return 0;
 }
 
 static const struct super_operations proc_sops = {
diff --git a/fs/proc/internal.h b/fs/proc/internal.h
index 3bfb7b8..3e8aeb8 100644
--- a/fs/proc/internal.h
+++ b/fs/proc/internal.h
@@ -61,12 +61,11 @@
 extern const struct file_operations proc_clear_refs_operations;
 extern const struct file_operations proc_pagemap_operations;
 extern const struct file_operations proc_net_operations;
-extern const struct file_operations proc_kmsg_operations;
 extern const struct inode_operations proc_net_inode_operations;
 
 void free_proc_entry(struct proc_dir_entry *de);
 
-int proc_init_inodecache(void);
+void proc_init_inodecache(void);
 
 static inline struct pid *proc_pid(struct inode *inode)
 {
diff --git a/fs/proc/interrupts.c b/fs/proc/interrupts.c
new file mode 100644
index 0000000..05029c0
--- /dev/null
+++ b/fs/proc/interrupts.c
@@ -0,0 +1,53 @@
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irqnr.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
+/*
+ * /proc/interrupts
+ */
+static void *int_seq_start(struct seq_file *f, loff_t *pos)
+{
+	return (*pos <= nr_irqs) ? pos : NULL;
+}
+
+static void *int_seq_next(struct seq_file *f, void *v, loff_t *pos)
+{
+	(*pos)++;
+	if (*pos > nr_irqs)
+		return NULL;
+	return pos;
+}
+
+static void int_seq_stop(struct seq_file *f, void *v)
+{
+	/* Nothing to do */
+}
+
+static const struct seq_operations int_seq_ops = {
+	.start = int_seq_start,
+	.next  = int_seq_next,
+	.stop  = int_seq_stop,
+	.show  = show_interrupts
+};
+
+static int interrupts_open(struct inode *inode, struct file *filp)
+{
+	return seq_open(filp, &int_seq_ops);
+}
+
+static const struct file_operations proc_interrupts_operations = {
+	.open		= interrupts_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int __init proc_interrupts_init(void)
+{
+	proc_create("interrupts", 0, NULL, &proc_interrupts_operations);
+	return 0;
+}
+module_init(proc_interrupts_init);
diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c
index c2370c7..59b43a0 100644
--- a/fs/proc/kcore.c
+++ b/fs/proc/kcore.c
@@ -27,6 +27,8 @@
 #define ELF_CORE_EFLAGS	0
 #endif
 
+static struct proc_dir_entry *proc_root_kcore;
+
 static int open_kcore(struct inode * inode, struct file * filp)
 {
 	return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
@@ -34,7 +36,7 @@
 
 static ssize_t read_kcore(struct file *, char __user *, size_t, loff_t *);
 
-const struct file_operations proc_kcore_operations = {
+static const struct file_operations proc_kcore_operations = {
 	.read		= read_kcore,
 	.open		= open_kcore,
 };
@@ -399,3 +401,13 @@
 
 	return acc;
 }
+
+static int __init proc_kcore_init(void)
+{
+	proc_root_kcore = proc_create("kcore", S_IRUSR, NULL, &proc_kcore_operations);
+	if (proc_root_kcore)
+		proc_root_kcore->size =
+				(size_t)high_memory - PAGE_OFFSET + PAGE_SIZE;
+	return 0;
+}
+module_init(proc_kcore_init);
diff --git a/fs/proc/kmsg.c b/fs/proc/kmsg.c
index 9fd5df3..7ca78346 100644
--- a/fs/proc/kmsg.c
+++ b/fs/proc/kmsg.c
@@ -10,13 +10,12 @@
 #include <linux/time.h>
 #include <linux/kernel.h>
 #include <linux/poll.h>
+#include <linux/proc_fs.h>
 #include <linux/fs.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
-#include "internal.h"
-
 extern wait_queue_head_t log_wait;
 
 extern int do_syslog(int type, char __user *bug, int count);
@@ -49,9 +48,16 @@
 }
 
 
-const struct file_operations proc_kmsg_operations = {
+static const struct file_operations proc_kmsg_operations = {
 	.read		= kmsg_read,
 	.poll		= kmsg_poll,
 	.open		= kmsg_open,
 	.release	= kmsg_release,
 };
+
+static int __init proc_kmsg_init(void)
+{
+	proc_create("kmsg", S_IRUSR, NULL, &proc_kmsg_operations);
+	return 0;
+}
+module_init(proc_kmsg_init);
diff --git a/fs/proc/loadavg.c b/fs/proc/loadavg.c
new file mode 100644
index 0000000..9bca39c
--- /dev/null
+++ b/fs/proc/loadavg.c
@@ -0,0 +1,51 @@
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/pid_namespace.h>
+#include <linux/proc_fs.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/seqlock.h>
+#include <linux/time.h>
+
+#define LOAD_INT(x) ((x) >> FSHIFT)
+#define LOAD_FRAC(x) LOAD_INT(((x) & (FIXED_1-1)) * 100)
+
+static int loadavg_proc_show(struct seq_file *m, void *v)
+{
+	int a, b, c;
+	unsigned long seq;
+
+	do {
+		seq = read_seqbegin(&xtime_lock);
+		a = avenrun[0] + (FIXED_1/200);
+		b = avenrun[1] + (FIXED_1/200);
+		c = avenrun[2] + (FIXED_1/200);
+	} while (read_seqretry(&xtime_lock, seq));
+
+	seq_printf(m, "%d.%02d %d.%02d %d.%02d %ld/%d %d\n",
+		LOAD_INT(a), LOAD_FRAC(a),
+		LOAD_INT(b), LOAD_FRAC(b),
+		LOAD_INT(c), LOAD_FRAC(c),
+		nr_running(), nr_threads,
+		task_active_pid_ns(current)->last_pid);
+	return 0;
+}
+
+static int loadavg_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, loadavg_proc_show, NULL);
+}
+
+static const struct file_operations loadavg_proc_fops = {
+	.open		= loadavg_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_loadavg_init(void)
+{
+	proc_create("loadavg", 0, NULL, &loadavg_proc_fops);
+	return 0;
+}
+module_init(proc_loadavg_init);
diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c
new file mode 100644
index 0000000..b1675c4
--- /dev/null
+++ b/fs/proc/meminfo.c
@@ -0,0 +1,168 @@
+#include <linux/fs.h>
+#include <linux/hugetlb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/mmzone.h>
+#include <linux/proc_fs.h>
+#include <linux/quicklist.h>
+#include <linux/seq_file.h>
+#include <linux/swap.h>
+#include <linux/vmstat.h>
+#include <asm/atomic.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include "internal.h"
+
+void __attribute__((weak)) arch_report_meminfo(struct seq_file *m)
+{
+}
+
+static int meminfo_proc_show(struct seq_file *m, void *v)
+{
+	struct sysinfo i;
+	unsigned long committed;
+	unsigned long allowed;
+	struct vmalloc_info vmi;
+	long cached;
+	unsigned long pages[NR_LRU_LISTS];
+	int lru;
+
+/*
+ * display in kilobytes.
+ */
+#define K(x) ((x) << (PAGE_SHIFT - 10))
+	si_meminfo(&i);
+	si_swapinfo(&i);
+	committed = atomic_long_read(&vm_committed_space);
+	allowed = ((totalram_pages - hugetlb_total_pages())
+		* sysctl_overcommit_ratio / 100) + total_swap_pages;
+
+	cached = global_page_state(NR_FILE_PAGES) -
+			total_swapcache_pages - i.bufferram;
+	if (cached < 0)
+		cached = 0;
+
+	get_vmalloc_info(&vmi);
+
+	for (lru = LRU_BASE; lru < NR_LRU_LISTS; lru++)
+		pages[lru] = global_page_state(NR_LRU_BASE + lru);
+
+	/*
+	 * Tagged format, for easy grepping and expansion.
+	 */
+	seq_printf(m,
+		"MemTotal:       %8lu kB\n"
+		"MemFree:        %8lu kB\n"
+		"Buffers:        %8lu kB\n"
+		"Cached:         %8lu kB\n"
+		"SwapCached:     %8lu kB\n"
+		"Active:         %8lu kB\n"
+		"Inactive:       %8lu kB\n"
+		"Active(anon):   %8lu kB\n"
+		"Inactive(anon): %8lu kB\n"
+		"Active(file):   %8lu kB\n"
+		"Inactive(file): %8lu kB\n"
+#ifdef CONFIG_UNEVICTABLE_LRU
+		"Unevictable:    %8lu kB\n"
+		"Mlocked:        %8lu kB\n"
+#endif
+#ifdef CONFIG_HIGHMEM
+		"HighTotal:      %8lu kB\n"
+		"HighFree:       %8lu kB\n"
+		"LowTotal:       %8lu kB\n"
+		"LowFree:        %8lu kB\n"
+#endif
+		"SwapTotal:      %8lu kB\n"
+		"SwapFree:       %8lu kB\n"
+		"Dirty:          %8lu kB\n"
+		"Writeback:      %8lu kB\n"
+		"AnonPages:      %8lu kB\n"
+		"Mapped:         %8lu kB\n"
+		"Slab:           %8lu kB\n"
+		"SReclaimable:   %8lu kB\n"
+		"SUnreclaim:     %8lu kB\n"
+		"PageTables:     %8lu kB\n"
+#ifdef CONFIG_QUICKLIST
+		"Quicklists:     %8lu kB\n"
+#endif
+		"NFS_Unstable:   %8lu kB\n"
+		"Bounce:         %8lu kB\n"
+		"WritebackTmp:   %8lu kB\n"
+		"CommitLimit:    %8lu kB\n"
+		"Committed_AS:   %8lu kB\n"
+		"VmallocTotal:   %8lu kB\n"
+		"VmallocUsed:    %8lu kB\n"
+		"VmallocChunk:   %8lu kB\n",
+		K(i.totalram),
+		K(i.freeram),
+		K(i.bufferram),
+		K(cached),
+		K(total_swapcache_pages),
+		K(pages[LRU_ACTIVE_ANON]   + pages[LRU_ACTIVE_FILE]),
+		K(pages[LRU_INACTIVE_ANON] + pages[LRU_INACTIVE_FILE]),
+		K(pages[LRU_ACTIVE_ANON]),
+		K(pages[LRU_INACTIVE_ANON]),
+		K(pages[LRU_ACTIVE_FILE]),
+		K(pages[LRU_INACTIVE_FILE]),
+#ifdef CONFIG_UNEVICTABLE_LRU
+		K(pages[LRU_UNEVICTABLE]),
+		K(global_page_state(NR_MLOCK)),
+#endif
+#ifdef CONFIG_HIGHMEM
+		K(i.totalhigh),
+		K(i.freehigh),
+		K(i.totalram-i.totalhigh),
+		K(i.freeram-i.freehigh),
+#endif
+		K(i.totalswap),
+		K(i.freeswap),
+		K(global_page_state(NR_FILE_DIRTY)),
+		K(global_page_state(NR_WRITEBACK)),
+		K(global_page_state(NR_ANON_PAGES)),
+		K(global_page_state(NR_FILE_MAPPED)),
+		K(global_page_state(NR_SLAB_RECLAIMABLE) +
+				global_page_state(NR_SLAB_UNRECLAIMABLE)),
+		K(global_page_state(NR_SLAB_RECLAIMABLE)),
+		K(global_page_state(NR_SLAB_UNRECLAIMABLE)),
+		K(global_page_state(NR_PAGETABLE)),
+#ifdef CONFIG_QUICKLIST
+		K(quicklist_total_size()),
+#endif
+		K(global_page_state(NR_UNSTABLE_NFS)),
+		K(global_page_state(NR_BOUNCE)),
+		K(global_page_state(NR_WRITEBACK_TEMP)),
+		K(allowed),
+		K(committed),
+		(unsigned long)VMALLOC_TOTAL >> 10,
+		vmi.used >> 10,
+		vmi.largest_chunk >> 10
+		);
+
+	hugetlb_report_meminfo(m);
+
+	arch_report_meminfo(m);
+
+	return 0;
+#undef K
+}
+
+static int meminfo_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, meminfo_proc_show, NULL);
+}
+
+static const struct file_operations meminfo_proc_fops = {
+	.open		= meminfo_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_meminfo_init(void)
+{
+	proc_create("meminfo", 0, NULL, &meminfo_proc_fops);
+	return 0;
+}
+module_init(proc_meminfo_init);
diff --git a/fs/proc/page.c b/fs/proc/page.c
new file mode 100644
index 0000000..767d95a
--- /dev/null
+++ b/fs/proc/page.c
@@ -0,0 +1,147 @@
+#include <linux/bootmem.h>
+#include <linux/compiler.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <asm/uaccess.h>
+#include "internal.h"
+
+#define KPMSIZE sizeof(u64)
+#define KPMMASK (KPMSIZE - 1)
+/* /proc/kpagecount - an array exposing page counts
+ *
+ * Each entry is a u64 representing the corresponding
+ * physical page count.
+ */
+static ssize_t kpagecount_read(struct file *file, char __user *buf,
+			     size_t count, loff_t *ppos)
+{
+	u64 __user *out = (u64 __user *)buf;
+	struct page *ppage;
+	unsigned long src = *ppos;
+	unsigned long pfn;
+	ssize_t ret = 0;
+	u64 pcount;
+
+	pfn = src / KPMSIZE;
+	count = min_t(size_t, count, (max_pfn * KPMSIZE) - src);
+	if (src & KPMMASK || count & KPMMASK)
+		return -EINVAL;
+
+	while (count > 0) {
+		ppage = NULL;
+		if (pfn_valid(pfn))
+			ppage = pfn_to_page(pfn);
+		pfn++;
+		if (!ppage)
+			pcount = 0;
+		else
+			pcount = page_mapcount(ppage);
+
+		if (put_user(pcount, out++)) {
+			ret = -EFAULT;
+			break;
+		}
+
+		count -= KPMSIZE;
+	}
+
+	*ppos += (char __user *)out - buf;
+	if (!ret)
+		ret = (char __user *)out - buf;
+	return ret;
+}
+
+static const struct file_operations proc_kpagecount_operations = {
+	.llseek = mem_lseek,
+	.read = kpagecount_read,
+};
+
+/* /proc/kpageflags - an array exposing page flags
+ *
+ * Each entry is a u64 representing the corresponding
+ * physical page flags.
+ */
+
+/* These macros are used to decouple internal flags from exported ones */
+
+#define KPF_LOCKED     0
+#define KPF_ERROR      1
+#define KPF_REFERENCED 2
+#define KPF_UPTODATE   3
+#define KPF_DIRTY      4
+#define KPF_LRU        5
+#define KPF_ACTIVE     6
+#define KPF_SLAB       7
+#define KPF_WRITEBACK  8
+#define KPF_RECLAIM    9
+#define KPF_BUDDY     10
+
+#define kpf_copy_bit(flags, srcpos, dstpos) (((flags >> srcpos) & 1) << dstpos)
+
+static ssize_t kpageflags_read(struct file *file, char __user *buf,
+			     size_t count, loff_t *ppos)
+{
+	u64 __user *out = (u64 __user *)buf;
+	struct page *ppage;
+	unsigned long src = *ppos;
+	unsigned long pfn;
+	ssize_t ret = 0;
+	u64 kflags, uflags;
+
+	pfn = src / KPMSIZE;
+	count = min_t(unsigned long, count, (max_pfn * KPMSIZE) - src);
+	if (src & KPMMASK || count & KPMMASK)
+		return -EINVAL;
+
+	while (count > 0) {
+		ppage = NULL;
+		if (pfn_valid(pfn))
+			ppage = pfn_to_page(pfn);
+		pfn++;
+		if (!ppage)
+			kflags = 0;
+		else
+			kflags = ppage->flags;
+
+		uflags = kpf_copy_bit(KPF_LOCKED, PG_locked, kflags) |
+			kpf_copy_bit(kflags, KPF_ERROR, PG_error) |
+			kpf_copy_bit(kflags, KPF_REFERENCED, PG_referenced) |
+			kpf_copy_bit(kflags, KPF_UPTODATE, PG_uptodate) |
+			kpf_copy_bit(kflags, KPF_DIRTY, PG_dirty) |
+			kpf_copy_bit(kflags, KPF_LRU, PG_lru) |
+			kpf_copy_bit(kflags, KPF_ACTIVE, PG_active) |
+			kpf_copy_bit(kflags, KPF_SLAB, PG_slab) |
+			kpf_copy_bit(kflags, KPF_WRITEBACK, PG_writeback) |
+			kpf_copy_bit(kflags, KPF_RECLAIM, PG_reclaim) |
+			kpf_copy_bit(kflags, KPF_BUDDY, PG_buddy);
+
+		if (put_user(uflags, out++)) {
+			ret = -EFAULT;
+			break;
+		}
+
+		count -= KPMSIZE;
+	}
+
+	*ppos += (char __user *)out - buf;
+	if (!ret)
+		ret = (char __user *)out - buf;
+	return ret;
+}
+
+static const struct file_operations proc_kpageflags_operations = {
+	.llseek = mem_lseek,
+	.read = kpageflags_read,
+};
+
+static int __init proc_page_init(void)
+{
+	proc_create("kpagecount", S_IRUSR, NULL, &proc_kpagecount_operations);
+	proc_create("kpageflags", S_IRUSR, NULL, &proc_kpageflags_operations);
+	return 0;
+}
+module_init(proc_page_init);
diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index eca471bc..d777789 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -4,6 +4,7 @@
  * Copyright 1997 Paul Mackerras
  */
 #include <linux/errno.h>
+#include <linux/init.h>
 #include <linux/time.h>
 #include <linux/proc_fs.h>
 #include <linux/stat.h>
@@ -214,7 +215,7 @@
 /*
  * Called on initialization to set up the /proc/device-tree subtree
  */
-void proc_device_tree_init(void)
+void __init proc_device_tree_init(void)
 {
 	struct device_node *root;
 	if ( !have_of )
diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
deleted file mode 100644
index 7ea52c79..0000000
--- a/fs/proc/proc_misc.c
+++ /dev/null
@@ -1,933 +0,0 @@
-/*
- *  linux/fs/proc/proc_misc.c
- *
- *  linux/fs/proc/array.c
- *  Copyright (C) 1992  by Linus Torvalds
- *  based on ideas by Darren Senn
- *
- *  This used to be the part of array.c. See the rest of history and credits
- *  there. I took this into a separate file and switched the thing to generic
- *  proc_file_inode_operations, leaving in array.c only per-process stuff.
- *  Inumbers allocation made dynamic (via create_proc_entry()).  AV, May 1999.
- *
- * Changes:
- * Fulton Green      :  Encapsulated position metric calculations.
- *			<kernel@FultonGreen.com>
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/kernel.h>
-#include <linux/kernel_stat.h>
-#include <linux/fs.h>
-#include <linux/tty.h>
-#include <linux/string.h>
-#include <linux/mman.h>
-#include <linux/quicklist.h>
-#include <linux/proc_fs.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/mmzone.h>
-#include <linux/pagemap.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/swap.h>
-#include <linux/slab.h>
-#include <linux/genhd.h>
-#include <linux/smp.h>
-#include <linux/signal.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <linux/times.h>
-#include <linux/profile.h>
-#include <linux/utsname.h>
-#include <linux/blkdev.h>
-#include <linux/hugetlb.h>
-#include <linux/jiffies.h>
-#include <linux/vmalloc.h>
-#include <linux/crash_dump.h>
-#include <linux/pid_namespace.h>
-#include <linux/bootmem.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/tlb.h>
-#include <asm/div64.h>
-#include "internal.h"
-
-#define LOAD_INT(x) ((x) >> FSHIFT)
-#define LOAD_FRAC(x) LOAD_INT(((x) & (FIXED_1-1)) * 100)
-/*
- * Warning: stuff below (imported functions) assumes that its output will fit
- * into one page. For some of those functions it may be wrong. Moreover, we
- * have a way to deal with that gracefully. Right now I used straightforward
- * wrappers, but this needs further analysis wrt potential overflows.
- */
-extern int get_hardware_list(char *);
-extern int get_stram_list(char *);
-extern int get_exec_domain_list(char *);
-
-static int proc_calc_metrics(char *page, char **start, off_t off,
-				 int count, int *eof, int len)
-{
-	if (len <= off+count) *eof = 1;
-	*start = page + off;
-	len -= off;
-	if (len>count) len = count;
-	if (len<0) len = 0;
-	return len;
-}
-
-static int loadavg_read_proc(char *page, char **start, off_t off,
-				 int count, int *eof, void *data)
-{
-	int a, b, c;
-	int len;
-	unsigned long seq;
-
-	do {
-		seq = read_seqbegin(&xtime_lock);
-		a = avenrun[0] + (FIXED_1/200);
-		b = avenrun[1] + (FIXED_1/200);
-		c = avenrun[2] + (FIXED_1/200);
-	} while (read_seqretry(&xtime_lock, seq));
-
-	len = sprintf(page,"%d.%02d %d.%02d %d.%02d %ld/%d %d\n",
-		LOAD_INT(a), LOAD_FRAC(a),
-		LOAD_INT(b), LOAD_FRAC(b),
-		LOAD_INT(c), LOAD_FRAC(c),
-		nr_running(), nr_threads,
-		task_active_pid_ns(current)->last_pid);
-	return proc_calc_metrics(page, start, off, count, eof, len);
-}
-
-static int uptime_read_proc(char *page, char **start, off_t off,
-				 int count, int *eof, void *data)
-{
-	struct timespec uptime;
-	struct timespec idle;
-	int len;
-	cputime_t idletime = cputime_add(init_task.utime, init_task.stime);
-
-	do_posix_clock_monotonic_gettime(&uptime);
-	monotonic_to_bootbased(&uptime);
-	cputime_to_timespec(idletime, &idle);
-	len = sprintf(page,"%lu.%02lu %lu.%02lu\n",
-			(unsigned long) uptime.tv_sec,
-			(uptime.tv_nsec / (NSEC_PER_SEC / 100)),
-			(unsigned long) idle.tv_sec,
-			(idle.tv_nsec / (NSEC_PER_SEC / 100)));
-
-	return proc_calc_metrics(page, start, off, count, eof, len);
-}
-
-int __attribute__((weak)) arch_report_meminfo(char *page)
-{
-	return 0;
-}
-
-static int meminfo_read_proc(char *page, char **start, off_t off,
-				 int count, int *eof, void *data)
-{
-	struct sysinfo i;
-	int len;
-	unsigned long committed;
-	unsigned long allowed;
-	struct vmalloc_info vmi;
-	long cached;
-	unsigned long pages[NR_LRU_LISTS];
-	int lru;
-
-/*
- * display in kilobytes.
- */
-#define K(x) ((x) << (PAGE_SHIFT - 10))
-	si_meminfo(&i);
-	si_swapinfo(&i);
-	committed = atomic_long_read(&vm_committed_space);
-	allowed = ((totalram_pages - hugetlb_total_pages())
-		* sysctl_overcommit_ratio / 100) + total_swap_pages;
-
-	cached = global_page_state(NR_FILE_PAGES) -
-			total_swapcache_pages - i.bufferram;
-	if (cached < 0)
-		cached = 0;
-
-	get_vmalloc_info(&vmi);
-
-	for (lru = LRU_BASE; lru < NR_LRU_LISTS; lru++)
-		pages[lru] = global_page_state(NR_LRU_BASE + lru);
-
-	/*
-	 * Tagged format, for easy grepping and expansion.
-	 */
-	len = sprintf(page,
-		"MemTotal:       %8lu kB\n"
-		"MemFree:        %8lu kB\n"
-		"Buffers:        %8lu kB\n"
-		"Cached:         %8lu kB\n"
-		"SwapCached:     %8lu kB\n"
-		"Active:         %8lu kB\n"
-		"Inactive:       %8lu kB\n"
-		"Active(anon):   %8lu kB\n"
-		"Inactive(anon): %8lu kB\n"
-		"Active(file):   %8lu kB\n"
-		"Inactive(file): %8lu kB\n"
-#ifdef CONFIG_UNEVICTABLE_LRU
-		"Unevictable:    %8lu kB\n"
-		"Mlocked:        %8lu kB\n"
-#endif
-#ifdef CONFIG_HIGHMEM
-		"HighTotal:      %8lu kB\n"
-		"HighFree:       %8lu kB\n"
-		"LowTotal:       %8lu kB\n"
-		"LowFree:        %8lu kB\n"
-#endif
-		"SwapTotal:      %8lu kB\n"
-		"SwapFree:       %8lu kB\n"
-		"Dirty:          %8lu kB\n"
-		"Writeback:      %8lu kB\n"
-		"AnonPages:      %8lu kB\n"
-		"Mapped:         %8lu kB\n"
-		"Slab:           %8lu kB\n"
-		"SReclaimable:   %8lu kB\n"
-		"SUnreclaim:     %8lu kB\n"
-		"PageTables:     %8lu kB\n"
-#ifdef CONFIG_QUICKLIST
-		"Quicklists:     %8lu kB\n"
-#endif
-		"NFS_Unstable:   %8lu kB\n"
-		"Bounce:         %8lu kB\n"
-		"WritebackTmp:   %8lu kB\n"
-		"CommitLimit:    %8lu kB\n"
-		"Committed_AS:   %8lu kB\n"
-		"VmallocTotal:   %8lu kB\n"
-		"VmallocUsed:    %8lu kB\n"
-		"VmallocChunk:   %8lu kB\n",
-		K(i.totalram),
-		K(i.freeram),
-		K(i.bufferram),
-		K(cached),
-		K(total_swapcache_pages),
-		K(pages[LRU_ACTIVE_ANON]   + pages[LRU_ACTIVE_FILE]),
-		K(pages[LRU_INACTIVE_ANON] + pages[LRU_INACTIVE_FILE]),
-		K(pages[LRU_ACTIVE_ANON]),
-		K(pages[LRU_INACTIVE_ANON]),
-		K(pages[LRU_ACTIVE_FILE]),
-		K(pages[LRU_INACTIVE_FILE]),
-#ifdef CONFIG_UNEVICTABLE_LRU
-		K(pages[LRU_UNEVICTABLE]),
-		K(global_page_state(NR_MLOCK)),
-#endif
-#ifdef CONFIG_HIGHMEM
-		K(i.totalhigh),
-		K(i.freehigh),
-		K(i.totalram-i.totalhigh),
-		K(i.freeram-i.freehigh),
-#endif
-		K(i.totalswap),
-		K(i.freeswap),
-		K(global_page_state(NR_FILE_DIRTY)),
-		K(global_page_state(NR_WRITEBACK)),
-		K(global_page_state(NR_ANON_PAGES)),
-		K(global_page_state(NR_FILE_MAPPED)),
-		K(global_page_state(NR_SLAB_RECLAIMABLE) +
-				global_page_state(NR_SLAB_UNRECLAIMABLE)),
-		K(global_page_state(NR_SLAB_RECLAIMABLE)),
-		K(global_page_state(NR_SLAB_UNRECLAIMABLE)),
-		K(global_page_state(NR_PAGETABLE)),
-#ifdef CONFIG_QUICKLIST
-		K(quicklist_total_size()),
-#endif
-		K(global_page_state(NR_UNSTABLE_NFS)),
-		K(global_page_state(NR_BOUNCE)),
-		K(global_page_state(NR_WRITEBACK_TEMP)),
-		K(allowed),
-		K(committed),
-		(unsigned long)VMALLOC_TOTAL >> 10,
-		vmi.used >> 10,
-		vmi.largest_chunk >> 10
-		);
-
-		len += hugetlb_report_meminfo(page + len);
-
-	len += arch_report_meminfo(page + len);
-
-	return proc_calc_metrics(page, start, off, count, eof, len);
-#undef K
-}
-
-static int fragmentation_open(struct inode *inode, struct file *file)
-{
-	(void)inode;
-	return seq_open(file, &fragmentation_op);
-}
-
-static const struct file_operations fragmentation_file_operations = {
-	.open		= fragmentation_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
-};
-
-static int pagetypeinfo_open(struct inode *inode, struct file *file)
-{
-	return seq_open(file, &pagetypeinfo_op);
-}
-
-static const struct file_operations pagetypeinfo_file_ops = {
-	.open		= pagetypeinfo_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
-};
-
-static int zoneinfo_open(struct inode *inode, struct file *file)
-{
-	return seq_open(file, &zoneinfo_op);
-}
-
-static const struct file_operations proc_zoneinfo_file_operations = {
-	.open		= zoneinfo_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
-};
-
-static int version_read_proc(char *page, char **start, off_t off,
-				 int count, int *eof, void *data)
-{
-	int len;
-
-	len = snprintf(page, PAGE_SIZE, linux_proc_banner,
-		utsname()->sysname,
-		utsname()->release,
-		utsname()->version);
-	return proc_calc_metrics(page, start, off, count, eof, len);
-}
-
-extern const struct seq_operations cpuinfo_op;
-static int cpuinfo_open(struct inode *inode, struct file *file)
-{
-	return seq_open(file, &cpuinfo_op);
-}
-
-static const struct file_operations proc_cpuinfo_operations = {
-	.open		= cpuinfo_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
-};
-
-static int devinfo_show(struct seq_file *f, void *v)
-{
-	int i = *(loff_t *) v;
-
-	if (i < CHRDEV_MAJOR_HASH_SIZE) {
-		if (i == 0)
-			seq_printf(f, "Character devices:\n");
-		chrdev_show(f, i);
-	}
-#ifdef CONFIG_BLOCK
-	else {
-		i -= CHRDEV_MAJOR_HASH_SIZE;
-		if (i == 0)
-			seq_printf(f, "\nBlock devices:\n");
-		blkdev_show(f, i);
-	}
-#endif
-	return 0;
-}
-
-static void *devinfo_start(struct seq_file *f, loff_t *pos)
-{
-	if (*pos < (BLKDEV_MAJOR_HASH_SIZE + CHRDEV_MAJOR_HASH_SIZE))
-		return pos;
-	return NULL;
-}
-
-static void *devinfo_next(struct seq_file *f, void *v, loff_t *pos)
-{
-	(*pos)++;
-	if (*pos >= (BLKDEV_MAJOR_HASH_SIZE + CHRDEV_MAJOR_HASH_SIZE))
-		return NULL;
-	return pos;
-}
-
-static void devinfo_stop(struct seq_file *f, void *v)
-{
-	/* Nothing to do */
-}
-
-static const struct seq_operations devinfo_ops = {
-	.start = devinfo_start,
-	.next  = devinfo_next,
-	.stop  = devinfo_stop,
-	.show  = devinfo_show
-};
-
-static int devinfo_open(struct inode *inode, struct file *filp)
-{
-	return seq_open(filp, &devinfo_ops);
-}
-
-static const struct file_operations proc_devinfo_operations = {
-	.open		= devinfo_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
-};
-
-static int vmstat_open(struct inode *inode, struct file *file)
-{
-	return seq_open(file, &vmstat_op);
-}
-static const struct file_operations proc_vmstat_file_operations = {
-	.open		= vmstat_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
-};
-
-#ifdef CONFIG_PROC_HARDWARE
-static int hardware_read_proc(char *page, char **start, off_t off,
-				 int count, int *eof, void *data)
-{
-	int len = get_hardware_list(page);
-	return proc_calc_metrics(page, start, off, count, eof, len);
-}
-#endif
-
-#ifdef CONFIG_STRAM_PROC
-static int stram_read_proc(char *page, char **start, off_t off,
-				 int count, int *eof, void *data)
-{
-	int len = get_stram_list(page);
-	return proc_calc_metrics(page, start, off, count, eof, len);
-}
-#endif
-
-#ifdef CONFIG_BLOCK
-static int partitions_open(struct inode *inode, struct file *file)
-{
-	return seq_open(file, &partitions_op);
-}
-static const struct file_operations proc_partitions_operations = {
-	.open		= partitions_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
-};
-
-static int diskstats_open(struct inode *inode, struct file *file)
-{
-	return seq_open(file, &diskstats_op);
-}
-static const struct file_operations proc_diskstats_operations = {
-	.open		= diskstats_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
-};
-#endif
-
-#ifdef CONFIG_MODULES
-extern const struct seq_operations modules_op;
-static int modules_open(struct inode *inode, struct file *file)
-{
-	return seq_open(file, &modules_op);
-}
-static const struct file_operations proc_modules_operations = {
-	.open		= modules_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
-};
-#endif
-
-#ifdef CONFIG_SLABINFO
-static int slabinfo_open(struct inode *inode, struct file *file)
-{
-	return seq_open(file, &slabinfo_op);
-}
-static const struct file_operations proc_slabinfo_operations = {
-	.open		= slabinfo_open,
-	.read		= seq_read,
-	.write		= slabinfo_write,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
-};
-
-#ifdef CONFIG_DEBUG_SLAB_LEAK
-extern const struct seq_operations slabstats_op;
-static int slabstats_open(struct inode *inode, struct file *file)
-{
-	unsigned long *n = kzalloc(PAGE_SIZE, GFP_KERNEL);
-	int ret = -ENOMEM;
-	if (n) {
-		ret = seq_open(file, &slabstats_op);
-		if (!ret) {
-			struct seq_file *m = file->private_data;
-			*n = PAGE_SIZE / (2 * sizeof(unsigned long));
-			m->private = n;
-			n = NULL;
-		}
-		kfree(n);
-	}
-	return ret;
-}
-
-static const struct file_operations proc_slabstats_operations = {
-	.open		= slabstats_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= seq_release_private,
-};
-#endif
-#endif
-
-#ifdef CONFIG_MMU
-static int vmalloc_open(struct inode *inode, struct file *file)
-{
-	unsigned int *ptr = NULL;
-	int ret;
-
-	if (NUMA_BUILD)
-		ptr = kmalloc(nr_node_ids * sizeof(unsigned int), GFP_KERNEL);
-	ret = seq_open(file, &vmalloc_op);
-	if (!ret) {
-		struct seq_file *m = file->private_data;
-		m->private = ptr;
-	} else
-		kfree(ptr);
-	return ret;
-}
-
-static const struct file_operations proc_vmalloc_operations = {
-	.open		= vmalloc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= seq_release_private,
-};
-#endif
-
-#ifndef arch_irq_stat_cpu
-#define arch_irq_stat_cpu(cpu) 0
-#endif
-#ifndef arch_irq_stat
-#define arch_irq_stat() 0
-#endif
-
-static int show_stat(struct seq_file *p, void *v)
-{
-	int i, j;
-	unsigned long jif;
-	cputime64_t user, nice, system, idle, iowait, irq, softirq, steal;
-	cputime64_t guest;
-	u64 sum = 0;
-	struct timespec boottime;
-	unsigned int per_irq_sum;
-
-	user = nice = system = idle = iowait =
-		irq = softirq = steal = cputime64_zero;
-	guest = cputime64_zero;
-	getboottime(&boottime);
-	jif = boottime.tv_sec;
-
-	for_each_possible_cpu(i) {
-		user = cputime64_add(user, kstat_cpu(i).cpustat.user);
-		nice = cputime64_add(nice, kstat_cpu(i).cpustat.nice);
-		system = cputime64_add(system, kstat_cpu(i).cpustat.system);
-		idle = cputime64_add(idle, kstat_cpu(i).cpustat.idle);
-		iowait = cputime64_add(iowait, kstat_cpu(i).cpustat.iowait);
-		irq = cputime64_add(irq, kstat_cpu(i).cpustat.irq);
-		softirq = cputime64_add(softirq, kstat_cpu(i).cpustat.softirq);
-		steal = cputime64_add(steal, kstat_cpu(i).cpustat.steal);
-		guest = cputime64_add(guest, kstat_cpu(i).cpustat.guest);
-
-		for_each_irq_nr(j)
-			sum += kstat_irqs_cpu(j, i);
-
-		sum += arch_irq_stat_cpu(i);
-	}
-	sum += arch_irq_stat();
-
-	seq_printf(p, "cpu  %llu %llu %llu %llu %llu %llu %llu %llu %llu\n",
-		(unsigned long long)cputime64_to_clock_t(user),
-		(unsigned long long)cputime64_to_clock_t(nice),
-		(unsigned long long)cputime64_to_clock_t(system),
-		(unsigned long long)cputime64_to_clock_t(idle),
-		(unsigned long long)cputime64_to_clock_t(iowait),
-		(unsigned long long)cputime64_to_clock_t(irq),
-		(unsigned long long)cputime64_to_clock_t(softirq),
-		(unsigned long long)cputime64_to_clock_t(steal),
-		(unsigned long long)cputime64_to_clock_t(guest));
-	for_each_online_cpu(i) {
-
-		/* Copy values here to work around gcc-2.95.3, gcc-2.96 */
-		user = kstat_cpu(i).cpustat.user;
-		nice = kstat_cpu(i).cpustat.nice;
-		system = kstat_cpu(i).cpustat.system;
-		idle = kstat_cpu(i).cpustat.idle;
-		iowait = kstat_cpu(i).cpustat.iowait;
-		irq = kstat_cpu(i).cpustat.irq;
-		softirq = kstat_cpu(i).cpustat.softirq;
-		steal = kstat_cpu(i).cpustat.steal;
-		guest = kstat_cpu(i).cpustat.guest;
-		seq_printf(p,
-			"cpu%d %llu %llu %llu %llu %llu %llu %llu %llu %llu\n",
-			i,
-			(unsigned long long)cputime64_to_clock_t(user),
-			(unsigned long long)cputime64_to_clock_t(nice),
-			(unsigned long long)cputime64_to_clock_t(system),
-			(unsigned long long)cputime64_to_clock_t(idle),
-			(unsigned long long)cputime64_to_clock_t(iowait),
-			(unsigned long long)cputime64_to_clock_t(irq),
-			(unsigned long long)cputime64_to_clock_t(softirq),
-			(unsigned long long)cputime64_to_clock_t(steal),
-			(unsigned long long)cputime64_to_clock_t(guest));
-	}
-	seq_printf(p, "intr %llu", (unsigned long long)sum);
-
-	/* sum again ? it could be updated? */
-	for_each_irq_nr(j) {
-		per_irq_sum = 0;
-
-		for_each_possible_cpu(i)
-			per_irq_sum += kstat_irqs_cpu(j, i);
-
-		seq_printf(p, " %u", per_irq_sum);
-	}
-
-	seq_printf(p,
-		"\nctxt %llu\n"
-		"btime %lu\n"
-		"processes %lu\n"
-		"procs_running %lu\n"
-		"procs_blocked %lu\n",
-		nr_context_switches(),
-		(unsigned long)jif,
-		total_forks,
-		nr_running(),
-		nr_iowait());
-
-	return 0;
-}
-
-static int stat_open(struct inode *inode, struct file *file)
-{
-	unsigned size = 4096 * (1 + num_possible_cpus() / 32);
-	char *buf;
-	struct seq_file *m;
-	int res;
-
-	/* don't ask for more than the kmalloc() max size, currently 128 KB */
-	if (size > 128 * 1024)
-		size = 128 * 1024;
-	buf = kmalloc(size, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	res = single_open(file, show_stat, NULL);
-	if (!res) {
-		m = file->private_data;
-		m->buf = buf;
-		m->size = size;
-	} else
-		kfree(buf);
-	return res;
-}
-static const struct file_operations proc_stat_operations = {
-	.open		= stat_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-/*
- * /proc/interrupts
- */
-static void *int_seq_start(struct seq_file *f, loff_t *pos)
-{
-	return (*pos <= nr_irqs) ? pos : NULL;
-}
-
-
-static void *int_seq_next(struct seq_file *f, void *v, loff_t *pos)
-{
-	(*pos)++;
-	return (*pos <= nr_irqs) ? pos : NULL;
-}
-
-static void int_seq_stop(struct seq_file *f, void *v)
-{
-	/* Nothing to do */
-}
-
-static const struct seq_operations int_seq_ops = {
-	.start = int_seq_start,
-	.next  = int_seq_next,
-	.stop  = int_seq_stop,
-	.show  = show_interrupts
-};
-
-static int interrupts_open(struct inode *inode, struct file *filp)
-{
-	return seq_open(filp, &int_seq_ops);
-}
-
-static const struct file_operations proc_interrupts_operations = {
-	.open		= interrupts_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
-};
-
-static int filesystems_read_proc(char *page, char **start, off_t off,
-				 int count, int *eof, void *data)
-{
-	int len = get_filesystem_list(page);
-	return proc_calc_metrics(page, start, off, count, eof, len);
-}
-
-static int cmdline_read_proc(char *page, char **start, off_t off,
-				 int count, int *eof, void *data)
-{
-	int len;
-
-	len = sprintf(page, "%s\n", saved_command_line);
-	return proc_calc_metrics(page, start, off, count, eof, len);
-}
-
-#ifdef CONFIG_FILE_LOCKING
-static int locks_open(struct inode *inode, struct file *filp)
-{
-	return seq_open(filp, &locks_seq_operations);
-}
-
-static const struct file_operations proc_locks_operations = {
-	.open		= locks_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
-};
-#endif /* CONFIG_FILE_LOCKING */
-
-static int execdomains_read_proc(char *page, char **start, off_t off,
-				 int count, int *eof, void *data)
-{
-	int len = get_exec_domain_list(page);
-	return proc_calc_metrics(page, start, off, count, eof, len);
-}
-
-#ifdef CONFIG_PROC_PAGE_MONITOR
-#define KPMSIZE sizeof(u64)
-#define KPMMASK (KPMSIZE - 1)
-/* /proc/kpagecount - an array exposing page counts
- *
- * Each entry is a u64 representing the corresponding
- * physical page count.
- */
-static ssize_t kpagecount_read(struct file *file, char __user *buf,
-			     size_t count, loff_t *ppos)
-{
-	u64 __user *out = (u64 __user *)buf;
-	struct page *ppage;
-	unsigned long src = *ppos;
-	unsigned long pfn;
-	ssize_t ret = 0;
-	u64 pcount;
-
-	pfn = src / KPMSIZE;
-	count = min_t(size_t, count, (max_pfn * KPMSIZE) - src);
-	if (src & KPMMASK || count & KPMMASK)
-		return -EINVAL;
-
-	while (count > 0) {
-		ppage = NULL;
-		if (pfn_valid(pfn))
-			ppage = pfn_to_page(pfn);
-		pfn++;
-		if (!ppage)
-			pcount = 0;
-		else
-			pcount = page_mapcount(ppage);
-
-		if (put_user(pcount, out++)) {
-			ret = -EFAULT;
-			break;
-		}
-
-		count -= KPMSIZE;
-	}
-
-	*ppos += (char __user *)out - buf;
-	if (!ret)
-		ret = (char __user *)out - buf;
-	return ret;
-}
-
-static struct file_operations proc_kpagecount_operations = {
-	.llseek = mem_lseek,
-	.read = kpagecount_read,
-};
-
-/* /proc/kpageflags - an array exposing page flags
- *
- * Each entry is a u64 representing the corresponding
- * physical page flags.
- */
-
-/* These macros are used to decouple internal flags from exported ones */
-
-#define KPF_LOCKED     0
-#define KPF_ERROR      1
-#define KPF_REFERENCED 2
-#define KPF_UPTODATE   3
-#define KPF_DIRTY      4
-#define KPF_LRU        5
-#define KPF_ACTIVE     6
-#define KPF_SLAB       7
-#define KPF_WRITEBACK  8
-#define KPF_RECLAIM    9
-#define KPF_BUDDY     10
-
-#define kpf_copy_bit(flags, srcpos, dstpos) (((flags >> srcpos) & 1) << dstpos)
-
-static ssize_t kpageflags_read(struct file *file, char __user *buf,
-			     size_t count, loff_t *ppos)
-{
-	u64 __user *out = (u64 __user *)buf;
-	struct page *ppage;
-	unsigned long src = *ppos;
-	unsigned long pfn;
-	ssize_t ret = 0;
-	u64 kflags, uflags;
-
-	pfn = src / KPMSIZE;
-	count = min_t(unsigned long, count, (max_pfn * KPMSIZE) - src);
-	if (src & KPMMASK || count & KPMMASK)
-		return -EINVAL;
-
-	while (count > 0) {
-		ppage = NULL;
-		if (pfn_valid(pfn))
-			ppage = pfn_to_page(pfn);
-		pfn++;
-		if (!ppage)
-			kflags = 0;
-		else
-			kflags = ppage->flags;
-
-		uflags = kpf_copy_bit(KPF_LOCKED, PG_locked, kflags) |
-			kpf_copy_bit(kflags, KPF_ERROR, PG_error) |
-			kpf_copy_bit(kflags, KPF_REFERENCED, PG_referenced) |
-			kpf_copy_bit(kflags, KPF_UPTODATE, PG_uptodate) |
-			kpf_copy_bit(kflags, KPF_DIRTY, PG_dirty) |
-			kpf_copy_bit(kflags, KPF_LRU, PG_lru) |
-			kpf_copy_bit(kflags, KPF_ACTIVE, PG_active) |
-			kpf_copy_bit(kflags, KPF_SLAB, PG_slab) |
-			kpf_copy_bit(kflags, KPF_WRITEBACK, PG_writeback) |
-			kpf_copy_bit(kflags, KPF_RECLAIM, PG_reclaim) |
-			kpf_copy_bit(kflags, KPF_BUDDY, PG_buddy);
-
-		if (put_user(uflags, out++)) {
-			ret = -EFAULT;
-			break;
-		}
-
-		count -= KPMSIZE;
-	}
-
-	*ppos += (char __user *)out - buf;
-	if (!ret)
-		ret = (char __user *)out - buf;
-	return ret;
-}
-
-static struct file_operations proc_kpageflags_operations = {
-	.llseek = mem_lseek,
-	.read = kpageflags_read,
-};
-#endif /* CONFIG_PROC_PAGE_MONITOR */
-
-struct proc_dir_entry *proc_root_kcore;
-
-void __init proc_misc_init(void)
-{
-	static struct {
-		char *name;
-		int (*read_proc)(char*,char**,off_t,int,int*,void*);
-	} *p, simple_ones[] = {
-		{"loadavg",     loadavg_read_proc},
-		{"uptime",	uptime_read_proc},
-		{"meminfo",	meminfo_read_proc},
-		{"version",	version_read_proc},
-#ifdef CONFIG_PROC_HARDWARE
-		{"hardware",	hardware_read_proc},
-#endif
-#ifdef CONFIG_STRAM_PROC
-		{"stram",	stram_read_proc},
-#endif
-		{"filesystems",	filesystems_read_proc},
-		{"cmdline",	cmdline_read_proc},
-		{"execdomains",	execdomains_read_proc},
-		{NULL,}
-	};
-	for (p = simple_ones; p->name; p++)
-		create_proc_read_entry(p->name, 0, NULL, p->read_proc, NULL);
-
-	proc_symlink("mounts", NULL, "self/mounts");
-
-	/* And now for trickier ones */
-#ifdef CONFIG_PRINTK
-	proc_create("kmsg", S_IRUSR, NULL, &proc_kmsg_operations);
-#endif
-#ifdef CONFIG_FILE_LOCKING
-	proc_create("locks", 0, NULL, &proc_locks_operations);
-#endif
-	proc_create("devices", 0, NULL, &proc_devinfo_operations);
-	proc_create("cpuinfo", 0, NULL, &proc_cpuinfo_operations);
-#ifdef CONFIG_BLOCK
-	proc_create("partitions", 0, NULL, &proc_partitions_operations);
-#endif
-	proc_create("stat", 0, NULL, &proc_stat_operations);
-	proc_create("interrupts", 0, NULL, &proc_interrupts_operations);
-#ifdef CONFIG_SLABINFO
-	proc_create("slabinfo",S_IWUSR|S_IRUGO,NULL,&proc_slabinfo_operations);
-#ifdef CONFIG_DEBUG_SLAB_LEAK
-	proc_create("slab_allocators", 0, NULL, &proc_slabstats_operations);
-#endif
-#endif
-#ifdef CONFIG_MMU
-	proc_create("vmallocinfo", S_IRUSR, NULL, &proc_vmalloc_operations);
-#endif
-	proc_create("buddyinfo", S_IRUGO, NULL, &fragmentation_file_operations);
-	proc_create("pagetypeinfo", S_IRUGO, NULL, &pagetypeinfo_file_ops);
-	proc_create("vmstat", S_IRUGO, NULL, &proc_vmstat_file_operations);
-	proc_create("zoneinfo", S_IRUGO, NULL, &proc_zoneinfo_file_operations);
-#ifdef CONFIG_BLOCK
-	proc_create("diskstats", 0, NULL, &proc_diskstats_operations);
-#endif
-#ifdef CONFIG_MODULES
-	proc_create("modules", 0, NULL, &proc_modules_operations);
-#endif
-#ifdef CONFIG_SCHEDSTATS
-	proc_create("schedstat", 0, NULL, &proc_schedstat_operations);
-#endif
-#ifdef CONFIG_PROC_KCORE
-	proc_root_kcore = proc_create("kcore", S_IRUSR, NULL, &proc_kcore_operations);
-	if (proc_root_kcore)
-		proc_root_kcore->size =
-				(size_t)high_memory - PAGE_OFFSET + PAGE_SIZE;
-#endif
-#ifdef CONFIG_PROC_PAGE_MONITOR
-	proc_create("kpagecount", S_IRUSR, NULL, &proc_kpagecount_operations);
-	proc_create("kpageflags", S_IRUSR, NULL, &proc_kpageflags_operations);
-#endif
-#ifdef CONFIG_PROC_VMCORE
-	proc_vmcore = proc_create("vmcore", S_IRUSR, NULL, &proc_vmcore_operations);
-#endif
-}
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index 945a810..94fcfff 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -1,7 +1,7 @@
 /*
  * /proc/sys support
  */
-
+#include <linux/init.h>
 #include <linux/sysctl.h>
 #include <linux/proc_fs.h>
 #include <linux/security.h>
@@ -298,13 +298,19 @@
 	 * sysctl entries that are not writeable,
 	 * are _NOT_ writeable, capabilities or not.
 	 */
-	struct ctl_table_header *head = grab_header(inode);
-	struct ctl_table *table = PROC_I(inode)->sysctl_entry;
+	struct ctl_table_header *head;
+	struct ctl_table *table;
 	int error;
 
+	/* Executable files are not allowed under /proc/sys/ */
+	if ((mask & MAY_EXEC) && S_ISREG(inode->i_mode))
+		return -EACCES;
+
+	head = grab_header(inode);
 	if (IS_ERR(head))
 		return PTR_ERR(head);
 
+	table = PROC_I(inode)->sysctl_entry;
 	if (!table) /* global root - r-xr-xr-x */
 		error = mask & MAY_WRITE ? -EACCES : 0;
 	else /* Use the permissions on the sysctl table entry */
@@ -353,6 +359,7 @@
 
 static const struct file_operations proc_sys_dir_file_operations = {
 	.readdir	= proc_sys_readdir,
+	.llseek		= generic_file_llseek,
 };
 
 static const struct inode_operations proc_sys_inode_operations = {
@@ -395,7 +402,7 @@
 	.d_compare	= proc_sys_compare,
 };
 
-int proc_sys_init(void)
+int __init proc_sys_init(void)
 {
 	struct proc_dir_entry *proc_sys_root;
 
diff --git a/fs/proc/root.c b/fs/proc/root.c
index 9511753..7761602 100644
--- a/fs/proc/root.c
+++ b/fs/proc/root.c
@@ -104,9 +104,9 @@
 
 void __init proc_root_init(void)
 {
-	int err = proc_init_inodecache();
-	if (err)
-		return;
+	int err;
+
+	proc_init_inodecache();
 	err = register_filesystem(&proc_fs_type);
 	if (err)
 		return;
@@ -117,7 +117,7 @@
 		return;
 	}
 
-	proc_misc_init();
+	proc_symlink("mounts", NULL, "self/mounts");
 
 	proc_net_init();
 
diff --git a/fs/proc/stat.c b/fs/proc/stat.c
new file mode 100644
index 0000000..81904f0
--- /dev/null
+++ b/fs/proc/stat.c
@@ -0,0 +1,153 @@
+#include <linux/cpumask.h>
+#include <linux/fs.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/proc_fs.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <asm/cputime.h>
+
+#ifndef arch_irq_stat_cpu
+#define arch_irq_stat_cpu(cpu) 0
+#endif
+#ifndef arch_irq_stat
+#define arch_irq_stat() 0
+#endif
+
+static int show_stat(struct seq_file *p, void *v)
+{
+	int i, j;
+	unsigned long jif;
+	cputime64_t user, nice, system, idle, iowait, irq, softirq, steal;
+	cputime64_t guest;
+	u64 sum = 0;
+	struct timespec boottime;
+	unsigned int per_irq_sum;
+
+	user = nice = system = idle = iowait =
+		irq = softirq = steal = cputime64_zero;
+	guest = cputime64_zero;
+	getboottime(&boottime);
+	jif = boottime.tv_sec;
+
+	for_each_possible_cpu(i) {
+		user = cputime64_add(user, kstat_cpu(i).cpustat.user);
+		nice = cputime64_add(nice, kstat_cpu(i).cpustat.nice);
+		system = cputime64_add(system, kstat_cpu(i).cpustat.system);
+		idle = cputime64_add(idle, kstat_cpu(i).cpustat.idle);
+		iowait = cputime64_add(iowait, kstat_cpu(i).cpustat.iowait);
+		irq = cputime64_add(irq, kstat_cpu(i).cpustat.irq);
+		softirq = cputime64_add(softirq, kstat_cpu(i).cpustat.softirq);
+		steal = cputime64_add(steal, kstat_cpu(i).cpustat.steal);
+		guest = cputime64_add(guest, kstat_cpu(i).cpustat.guest);
+
+		for_each_irq_nr(j)
+			sum += kstat_irqs_cpu(j, i);
+
+		sum += arch_irq_stat_cpu(i);
+	}
+	sum += arch_irq_stat();
+
+	seq_printf(p, "cpu  %llu %llu %llu %llu %llu %llu %llu %llu %llu\n",
+		(unsigned long long)cputime64_to_clock_t(user),
+		(unsigned long long)cputime64_to_clock_t(nice),
+		(unsigned long long)cputime64_to_clock_t(system),
+		(unsigned long long)cputime64_to_clock_t(idle),
+		(unsigned long long)cputime64_to_clock_t(iowait),
+		(unsigned long long)cputime64_to_clock_t(irq),
+		(unsigned long long)cputime64_to_clock_t(softirq),
+		(unsigned long long)cputime64_to_clock_t(steal),
+		(unsigned long long)cputime64_to_clock_t(guest));
+	for_each_online_cpu(i) {
+
+		/* Copy values here to work around gcc-2.95.3, gcc-2.96 */
+		user = kstat_cpu(i).cpustat.user;
+		nice = kstat_cpu(i).cpustat.nice;
+		system = kstat_cpu(i).cpustat.system;
+		idle = kstat_cpu(i).cpustat.idle;
+		iowait = kstat_cpu(i).cpustat.iowait;
+		irq = kstat_cpu(i).cpustat.irq;
+		softirq = kstat_cpu(i).cpustat.softirq;
+		steal = kstat_cpu(i).cpustat.steal;
+		guest = kstat_cpu(i).cpustat.guest;
+		seq_printf(p,
+			"cpu%d %llu %llu %llu %llu %llu %llu %llu %llu %llu\n",
+			i,
+			(unsigned long long)cputime64_to_clock_t(user),
+			(unsigned long long)cputime64_to_clock_t(nice),
+			(unsigned long long)cputime64_to_clock_t(system),
+			(unsigned long long)cputime64_to_clock_t(idle),
+			(unsigned long long)cputime64_to_clock_t(iowait),
+			(unsigned long long)cputime64_to_clock_t(irq),
+			(unsigned long long)cputime64_to_clock_t(softirq),
+			(unsigned long long)cputime64_to_clock_t(steal),
+			(unsigned long long)cputime64_to_clock_t(guest));
+	}
+	seq_printf(p, "intr %llu", (unsigned long long)sum);
+
+	/* sum again ? it could be updated? */
+	for_each_irq_nr(j) {
+		per_irq_sum = 0;
+
+		for_each_possible_cpu(i)
+			per_irq_sum += kstat_irqs_cpu(j, i);
+
+		seq_printf(p, " %u", per_irq_sum);
+	}
+
+	seq_printf(p,
+		"\nctxt %llu\n"
+		"btime %lu\n"
+		"processes %lu\n"
+		"procs_running %lu\n"
+		"procs_blocked %lu\n",
+		nr_context_switches(),
+		(unsigned long)jif,
+		total_forks,
+		nr_running(),
+		nr_iowait());
+
+	return 0;
+}
+
+static int stat_open(struct inode *inode, struct file *file)
+{
+	unsigned size = 4096 * (1 + num_possible_cpus() / 32);
+	char *buf;
+	struct seq_file *m;
+	int res;
+
+	/* don't ask for more than the kmalloc() max size, currently 128 KB */
+	if (size > 128 * 1024)
+		size = 128 * 1024;
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	res = single_open(file, show_stat, NULL);
+	if (!res) {
+		m = file->private_data;
+		m->buf = buf;
+		m->size = size;
+	} else
+		kfree(buf);
+	return res;
+}
+
+static const struct file_operations proc_stat_operations = {
+	.open		= stat_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_stat_init(void)
+{
+	proc_create("stat", 0, NULL, &proc_stat_operations);
+	return 0;
+}
+module_init(proc_stat_init);
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 4806830..b770c09 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -198,11 +198,8 @@
 	return ret;
 }
 
-static int show_map(struct seq_file *m, void *v)
+static void show_map_vma(struct seq_file *m, struct vm_area_struct *vma)
 {
-	struct proc_maps_private *priv = m->private;
-	struct task_struct *task = priv->task;
-	struct vm_area_struct *vma = v;
 	struct mm_struct *mm = vma->vm_mm;
 	struct file *file = vma->vm_file;
 	int flags = vma->vm_flags;
@@ -254,6 +251,15 @@
 		}
 	}
 	seq_putc(m, '\n');
+}
+
+static int show_map(struct seq_file *m, void *v)
+{
+	struct vm_area_struct *vma = v;
+	struct proc_maps_private *priv = m->private;
+	struct task_struct *task = priv->task;
+
+	show_map_vma(m, vma);
 
 	if (m->count < m->size)  /* vma is copied successfully */
 		m->version = (vma != get_gate_vma(task))? vma->vm_start: 0;
@@ -364,9 +370,10 @@
 
 static int show_smap(struct seq_file *m, void *v)
 {
+	struct proc_maps_private *priv = m->private;
+	struct task_struct *task = priv->task;
 	struct vm_area_struct *vma = v;
 	struct mem_size_stats mss;
-	int ret;
 	struct mm_walk smaps_walk = {
 		.pmd_entry = smaps_pte_range,
 		.mm = vma->vm_mm,
@@ -378,9 +385,7 @@
 	if (vma->vm_mm && !is_vm_hugetlb_page(vma))
 		walk_page_range(vma->vm_start, vma->vm_end, &smaps_walk);
 
-	ret = show_map(m, v);
-	if (ret)
-		return ret;
+	show_map_vma(m, vma);
 
 	seq_printf(m,
 		   "Size:           %8lu kB\n"
@@ -402,7 +407,9 @@
 		   mss.referenced >> 10,
 		   mss.swap >> 10);
 
-	return ret;
+	if (m->count < m->size)  /* vma is copied successfully */
+		m->version = (vma != get_gate_vma(task)) ? vma->vm_start : 0;
+	return 0;
 }
 
 static const struct seq_operations proc_pid_smaps_op = {
diff --git a/fs/proc/uptime.c b/fs/proc/uptime.c
new file mode 100644
index 0000000..0c10a0b
--- /dev/null
+++ b/fs/proc/uptime.c
@@ -0,0 +1,43 @@
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/time.h>
+#include <asm/cputime.h>
+
+static int uptime_proc_show(struct seq_file *m, void *v)
+{
+	struct timespec uptime;
+	struct timespec idle;
+	cputime_t idletime = cputime_add(init_task.utime, init_task.stime);
+
+	do_posix_clock_monotonic_gettime(&uptime);
+	monotonic_to_bootbased(&uptime);
+	cputime_to_timespec(idletime, &idle);
+	seq_printf(m, "%lu.%02lu %lu.%02lu\n",
+			(unsigned long) uptime.tv_sec,
+			(uptime.tv_nsec / (NSEC_PER_SEC / 100)),
+			(unsigned long) idle.tv_sec,
+			(idle.tv_nsec / (NSEC_PER_SEC / 100)));
+	return 0;
+}
+
+static int uptime_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, uptime_proc_show, NULL);
+}
+
+static const struct file_operations uptime_proc_fops = {
+	.open		= uptime_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_uptime_init(void)
+{
+	proc_create("uptime", 0, NULL, &uptime_proc_fops);
+	return 0;
+}
+module_init(proc_uptime_init);
diff --git a/fs/proc/version.c b/fs/proc/version.c
new file mode 100644
index 0000000..76817a6
--- /dev/null
+++ b/fs/proc/version.c
@@ -0,0 +1,34 @@
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/utsname.h>
+
+static int version_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, linux_proc_banner,
+		utsname()->sysname,
+		utsname()->release,
+		utsname()->version);
+	return 0;
+}
+
+static int version_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, version_proc_show, NULL);
+}
+
+static const struct file_operations version_proc_fops = {
+	.open		= version_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_version_init(void)
+{
+	proc_create("version", 0, NULL, &version_proc_fops);
+	return 0;
+}
+module_init(proc_version_init);
diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
index cd9ca67..03ec595 100644
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -32,7 +32,7 @@
 /* Total size of vmcore file. */
 static u64 vmcore_size;
 
-struct proc_dir_entry *proc_vmcore = NULL;
+static struct proc_dir_entry *proc_vmcore = NULL;
 
 /* Reads a page from the oldmem device from given offset. */
 static ssize_t read_from_oldmem(char *buf, size_t count,
@@ -162,7 +162,7 @@
 	return acc;
 }
 
-const struct file_operations proc_vmcore_operations = {
+static const struct file_operations proc_vmcore_operations = {
 	.read		= read_vmcore,
 };
 
@@ -652,7 +652,7 @@
 		return rc;
 	}
 
-	/* Initialize /proc/vmcore size if proc is already up. */
+	proc_vmcore = proc_create("vmcore", S_IRUSR, NULL, &proc_vmcore_operations);
 	if (proc_vmcore)
 		proc_vmcore->size = vmcore_size;
 	return 0;
diff --git a/fs/read_write.c b/fs/read_write.c
index 9ba495d..969a6d9 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -31,39 +31,61 @@
 
 EXPORT_SYMBOL(generic_ro_fops);
 
+/**
+ * generic_file_llseek_unlocked - lockless generic llseek implementation
+ * @file:	file structure to seek on
+ * @offset:	file offset to seek to
+ * @origin:	type of seek
+ *
+ * Updates the file offset to the value specified by @offset and @origin.
+ * Locking must be provided by the caller.
+ */
 loff_t
 generic_file_llseek_unlocked(struct file *file, loff_t offset, int origin)
 {
-	loff_t retval;
 	struct inode *inode = file->f_mapping->host;
 
 	switch (origin) {
-		case SEEK_END:
-			offset += inode->i_size;
-			break;
-		case SEEK_CUR:
-			offset += file->f_pos;
+	case SEEK_END:
+		offset += inode->i_size;
+		break;
+	case SEEK_CUR:
+		offset += file->f_pos;
+		break;
 	}
-	retval = -EINVAL;
-	if (offset>=0 && offset<=inode->i_sb->s_maxbytes) {
-		/* Special lock needed here? */
-		if (offset != file->f_pos) {
-			file->f_pos = offset;
-			file->f_version = 0;
-		}
-		retval = offset;
+
+	if (offset < 0 || offset > inode->i_sb->s_maxbytes)
+		return -EINVAL;
+
+	/* Special lock needed here? */
+	if (offset != file->f_pos) {
+		file->f_pos = offset;
+		file->f_version = 0;
 	}
-	return retval;
+
+	return offset;
 }
 EXPORT_SYMBOL(generic_file_llseek_unlocked);
 
+/**
+ * generic_file_llseek - generic llseek implementation for regular files
+ * @file:	file structure to seek on
+ * @offset:	file offset to seek to
+ * @origin:	type of seek
+ *
+ * This is a generic implemenation of ->llseek useable for all normal local
+ * filesystems.  It just updates the file offset to the value specified by
+ * @offset and @origin under i_mutex.
+ */
 loff_t generic_file_llseek(struct file *file, loff_t offset, int origin)
 {
-	loff_t n;
+	loff_t rval;
+
 	mutex_lock(&file->f_dentry->d_inode->i_mutex);
-	n = generic_file_llseek_unlocked(file, offset, origin);
+	rval = generic_file_llseek_unlocked(file, offset, origin);
 	mutex_unlock(&file->f_dentry->d_inode->i_mutex);
-	return n;
+
+	return rval;
 }
 EXPORT_SYMBOL(generic_file_llseek);
 
diff --git a/fs/readdir.c b/fs/readdir.c
index 93a7559..b318d9b 100644
--- a/fs/readdir.c
+++ b/fs/readdir.c
@@ -117,7 +117,7 @@
 	buf.dirent = dirent;
 
 	error = vfs_readdir(file, fillonedir, &buf);
-	if (error >= 0)
+	if (buf.result)
 		error = buf.result;
 
 	fput(file);
@@ -209,9 +209,8 @@
 	buf.error = 0;
 
 	error = vfs_readdir(file, filldir, &buf);
-	if (error < 0)
-		goto out_putf;
-	error = buf.error;
+	if (error >= 0)
+		error = buf.error;
 	lastdirent = buf.previous;
 	if (lastdirent) {
 		if (put_user(file->f_pos, &lastdirent->d_off))
@@ -219,8 +218,6 @@
 		else
 			error = count - buf.count;
 	}
-
-out_putf:
 	fput(file);
 out:
 	return error;
@@ -293,19 +290,16 @@
 	buf.error = 0;
 
 	error = vfs_readdir(file, filldir64, &buf);
-	if (error < 0)
-		goto out_putf;
-	error = buf.error;
+	if (error >= 0)
+		error = buf.error;
 	lastdirent = buf.previous;
 	if (lastdirent) {
 		typeof(lastdirent->d_off) d_off = file->f_pos;
-		error = -EFAULT;
 		if (__put_user(d_off, &lastdirent->d_off))
-			goto out_putf;
-		error = count - buf.count;
+			error = -EFAULT;
+		else
+			error = count - buf.count;
 	}
-
-out_putf:
 	fput(file);
 out:
 	return error;
diff --git a/fs/reiserfs/file.c b/fs/reiserfs/file.c
index a804903..3340841 100644
--- a/fs/reiserfs/file.c
+++ b/fs/reiserfs/file.c
@@ -296,6 +296,7 @@
 	.aio_write = generic_file_aio_write,
 	.splice_read = generic_file_splice_read,
 	.splice_write = generic_file_splice_write,
+	.llseek = generic_file_llseek,
 };
 
 const struct inode_operations reiserfs_file_inode_operations = {
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 5699171..6c4c2c6 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -1522,7 +1522,6 @@
 
 {
 	struct cpu_key key;
-	struct dentry *result;
 	struct inode *inode;
 
 	key.on_disk_key.k_objectid = objectid;
@@ -1535,16 +1534,8 @@
 		inode = NULL;
 	}
 	reiserfs_write_unlock(sb);
-	if (!inode)
-		inode = ERR_PTR(-ESTALE);
-	if (IS_ERR(inode))
-		return ERR_CAST(inode);
-	result = d_alloc_anon(inode);
-	if (!result) {
-		iput(inode);
-		return ERR_PTR(-ENOMEM);
-	}
-	return result;
+
+	return d_obtain_alias(inode);
 }
 
 struct dentry *reiserfs_fh_to_dentry(struct super_block *sb, struct fid *fid,
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index c21df71..9643c3b 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -2575,7 +2575,7 @@
 	if (journal->j_dev_bd != NULL) {
 		if (journal->j_dev_bd->bd_dev != super->s_dev)
 			bd_release(journal->j_dev_bd);
-		result = blkdev_put(journal->j_dev_bd);
+		result = blkdev_put(journal->j_dev_bd, journal->j_dev_mode);
 		journal->j_dev_bd = NULL;
 	}
 
@@ -2593,7 +2593,7 @@
 {
 	int result;
 	dev_t jdev;
-	int blkdev_mode = FMODE_READ | FMODE_WRITE;
+	fmode_t blkdev_mode = FMODE_READ | FMODE_WRITE;
 	char b[BDEVNAME_SIZE];
 
 	result = 0;
@@ -2608,6 +2608,7 @@
 	/* there is no "jdev" option and journal is on separate device */
 	if ((!jdev_name || !jdev_name[0])) {
 		journal->j_dev_bd = open_by_devnum(jdev, blkdev_mode);
+		journal->j_dev_mode = blkdev_mode;
 		if (IS_ERR(journal->j_dev_bd)) {
 			result = PTR_ERR(journal->j_dev_bd);
 			journal->j_dev_bd = NULL;
@@ -2618,7 +2619,7 @@
 		} else if (jdev != super->s_dev) {
 			result = bd_claim(journal->j_dev_bd, journal);
 			if (result) {
-				blkdev_put(journal->j_dev_bd);
+				blkdev_put(journal->j_dev_bd, blkdev_mode);
 				return result;
 			}
 
@@ -2628,7 +2629,9 @@
 		return 0;
 	}
 
-	journal->j_dev_bd = open_bdev_excl(jdev_name, 0, journal);
+	journal->j_dev_mode = blkdev_mode;
+	journal->j_dev_bd = open_bdev_exclusive(jdev_name,
+						blkdev_mode, journal);
 	if (IS_ERR(journal->j_dev_bd)) {
 		result = PTR_ERR(journal->j_dev_bd);
 		journal->j_dev_bd = NULL;
diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c
index c1add28..f89ebb9 100644
--- a/fs/reiserfs/namei.c
+++ b/fs/reiserfs/namei.c
@@ -383,7 +383,6 @@
 	struct inode *inode = NULL;
 	struct reiserfs_dir_entry de;
 	INITIALIZE_PATH(path_to_entry);
-	struct dentry *parent;
 	struct inode *dir = child->d_inode;
 
 	if (dir->i_nlink == 0) {
@@ -401,15 +400,7 @@
 	inode = reiserfs_iget(dir->i_sb, (struct cpu_key *)&(de.de_dir_id));
 	reiserfs_write_unlock(dir->i_sb);
 
-	if (!inode || IS_ERR(inode)) {
-		return ERR_PTR(-EACCES);
-	}
-	parent = d_alloc_anon(inode);
-	if (!parent) {
-		iput(inode);
-		parent = ERR_PTR(-ENOMEM);
-	}
-	return parent;
+	return d_obtain_alias(inode);
 }
 
 /* add entry to the directory (entry can be hidden). 
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index d318c7e..663a91f 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -2058,10 +2058,10 @@
  * Standard function to be called on quota_on
  */
 static int reiserfs_quota_on(struct super_block *sb, int type, int format_id,
-			     char *path, int remount)
+			     char *name, int remount)
 {
 	int err;
-	struct nameidata nd;
+	struct path path;
 	struct inode *inode;
 	struct reiserfs_transaction_handle th;
 
@@ -2069,16 +2069,16 @@
 		return -EINVAL;
 	/* No more checks needed? Path and format_id are bogus anyway... */
 	if (remount)
-		return vfs_quota_on(sb, type, format_id, path, 1);
-	err = path_lookup(path, LOOKUP_FOLLOW, &nd);
+		return vfs_quota_on(sb, type, format_id, name, 1);
+	err = kern_path(name, LOOKUP_FOLLOW, &path);
 	if (err)
 		return err;
 	/* Quotafile not on the same filesystem? */
-	if (nd.path.mnt->mnt_sb != sb) {
+	if (path.mnt->mnt_sb != sb) {
 		err = -EXDEV;
 		goto out;
 	}
-	inode = nd.path.dentry->d_inode;
+	inode = path.dentry->d_inode;
 	/* We must not pack tails for quota files on reiserfs for quota IO to work */
 	if (!(REISERFS_I(inode)->i_flags & i_nopack_mask)) {
 		err = reiserfs_unpack(inode, NULL);
@@ -2094,7 +2094,7 @@
 	/* Journaling quota? */
 	if (REISERFS_SB(sb)->s_qf_names[type]) {
 		/* Quotafile not of fs root? */
-		if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
+		if (path.dentry->d_parent != sb->s_root)
 			reiserfs_warning(sb,
 				 "reiserfs: Quota file not on filesystem root. "
 				 "Journalled quota will not work.");
@@ -2113,9 +2113,9 @@
 		if (err)
 			goto out;
 	}
-	err = vfs_quota_on_path(sb, type, format_id, &nd.path);
+	err = vfs_quota_on_path(sb, type, format_id, &path);
 out:
-	path_put(&nd.path);
+	path_put(&path);
 	return err;
 }
 
diff --git a/fs/select.c b/fs/select.c
index da0e882..87df51e 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -24,9 +24,64 @@
 #include <linux/fdtable.h>
 #include <linux/fs.h>
 #include <linux/rcupdate.h>
+#include <linux/hrtimer.h>
 
 #include <asm/uaccess.h>
 
+
+/*
+ * Estimate expected accuracy in ns from a timeval.
+ *
+ * After quite a bit of churning around, we've settled on
+ * a simple thing of taking 0.1% of the timeout as the
+ * slack, with a cap of 100 msec.
+ * "nice" tasks get a 0.5% slack instead.
+ *
+ * Consider this comment an open invitation to come up with even
+ * better solutions..
+ */
+
+static long __estimate_accuracy(struct timespec *tv)
+{
+	long slack;
+	int divfactor = 1000;
+
+	if (task_nice(current) > 0)
+		divfactor = divfactor / 5;
+
+	slack = tv->tv_nsec / divfactor;
+	slack += tv->tv_sec * (NSEC_PER_SEC/divfactor);
+
+	if (slack > 100 * NSEC_PER_MSEC)
+		slack =  100 * NSEC_PER_MSEC;
+
+	if (slack < 0)
+		slack = 0;
+	return slack;
+}
+
+static long estimate_accuracy(struct timespec *tv)
+{
+	unsigned long ret;
+	struct timespec now;
+
+	/*
+	 * Realtime tasks get a slack of 0 for obvious reasons.
+	 */
+
+	if (rt_task(current))
+		return 0;
+
+	ktime_get_ts(&now);
+	now = timespec_sub(*tv, now);
+	ret = __estimate_accuracy(&now);
+	if (ret < current->timer_slack_ns)
+		return current->timer_slack_ns;
+	return ret;
+}
+
+
+
 struct poll_table_page {
 	struct poll_table_page * next;
 	struct poll_table_entry * entry;
@@ -130,6 +185,79 @@
 	add_wait_queue(wait_address, &entry->wait);
 }
 
+/**
+ * poll_select_set_timeout - helper function to setup the timeout value
+ * @to:		pointer to timespec variable for the final timeout
+ * @sec:	seconds (from user space)
+ * @nsec:	nanoseconds (from user space)
+ *
+ * Note, we do not use a timespec for the user space value here, That
+ * way we can use the function for timeval and compat interfaces as well.
+ *
+ * Returns -EINVAL if sec/nsec are not normalized. Otherwise 0.
+ */
+int poll_select_set_timeout(struct timespec *to, long sec, long nsec)
+{
+	struct timespec ts = {.tv_sec = sec, .tv_nsec = nsec};
+
+	if (!timespec_valid(&ts))
+		return -EINVAL;
+
+	/* Optimize for the zero timeout value here */
+	if (!sec && !nsec) {
+		to->tv_sec = to->tv_nsec = 0;
+	} else {
+		ktime_get_ts(to);
+		*to = timespec_add_safe(*to, ts);
+	}
+	return 0;
+}
+
+static int poll_select_copy_remaining(struct timespec *end_time, void __user *p,
+				      int timeval, int ret)
+{
+	struct timespec rts;
+	struct timeval rtv;
+
+	if (!p)
+		return ret;
+
+	if (current->personality & STICKY_TIMEOUTS)
+		goto sticky;
+
+	/* No update for zero timeout */
+	if (!end_time->tv_sec && !end_time->tv_nsec)
+		return ret;
+
+	ktime_get_ts(&rts);
+	rts = timespec_sub(*end_time, rts);
+	if (rts.tv_sec < 0)
+		rts.tv_sec = rts.tv_nsec = 0;
+
+	if (timeval) {
+		rtv.tv_sec = rts.tv_sec;
+		rtv.tv_usec = rts.tv_nsec / NSEC_PER_USEC;
+
+		if (!copy_to_user(p, &rtv, sizeof(rtv)))
+			return ret;
+
+	} else if (!copy_to_user(p, &rts, sizeof(rts)))
+		return ret;
+
+	/*
+	 * If an application puts its timeval in read-only memory, we
+	 * don't want the Linux-specific update to the timeval to
+	 * cause a fault after the select has completed
+	 * successfully. However, because we're not updating the
+	 * timeval, we can't restart the system call.
+	 */
+
+sticky:
+	if (ret == -ERESTARTNOHAND)
+		ret = -EINTR;
+	return ret;
+}
+
 #define FDS_IN(fds, n)		(fds->in + n)
 #define FDS_OUT(fds, n)		(fds->out + n)
 #define FDS_EX(fds, n)		(fds->ex + n)
@@ -182,11 +310,13 @@
 #define POLLOUT_SET (POLLWRBAND | POLLWRNORM | POLLOUT | POLLERR)
 #define POLLEX_SET (POLLPRI)
 
-int do_select(int n, fd_set_bits *fds, s64 *timeout)
+int do_select(int n, fd_set_bits *fds, struct timespec *end_time)
 {
+	ktime_t expire, *to = NULL;
 	struct poll_wqueues table;
 	poll_table *wait;
-	int retval, i;
+	int retval, i, timed_out = 0;
+	unsigned long slack = 0;
 
 	rcu_read_lock();
 	retval = max_select_fd(n, fds);
@@ -198,12 +328,17 @@
 
 	poll_initwait(&table);
 	wait = &table.pt;
-	if (!*timeout)
+	if (end_time && !end_time->tv_sec && !end_time->tv_nsec) {
 		wait = NULL;
+		timed_out = 1;
+	}
+
+	if (end_time && !timed_out)
+		slack = estimate_accuracy(end_time);
+
 	retval = 0;
 	for (;;) {
 		unsigned long *rinp, *routp, *rexp, *inp, *outp, *exp;
-		long __timeout;
 
 		set_current_state(TASK_INTERRUPTIBLE);
 
@@ -259,27 +394,25 @@
 			cond_resched();
 		}
 		wait = NULL;
-		if (retval || !*timeout || signal_pending(current))
+		if (retval || timed_out || signal_pending(current))
 			break;
 		if (table.error) {
 			retval = table.error;
 			break;
 		}
 
-		if (*timeout < 0) {
-			/* Wait indefinitely */
-			__timeout = MAX_SCHEDULE_TIMEOUT;
-		} else if (unlikely(*timeout >= (s64)MAX_SCHEDULE_TIMEOUT - 1)) {
-			/* Wait for longer than MAX_SCHEDULE_TIMEOUT. Do it in a loop */
-			__timeout = MAX_SCHEDULE_TIMEOUT - 1;
-			*timeout -= __timeout;
-		} else {
-			__timeout = *timeout;
-			*timeout = 0;
+		/*
+		 * If this is the first loop and we have a timeout
+		 * given, then we convert to ktime_t and set the to
+		 * pointer to the expiry value.
+		 */
+		if (end_time && !to) {
+			expire = timespec_to_ktime(*end_time);
+			to = &expire;
 		}
-		__timeout = schedule_timeout(__timeout);
-		if (*timeout >= 0)
-			*timeout += __timeout;
+
+		if (!schedule_hrtimeout_range(to, slack, HRTIMER_MODE_ABS))
+			timed_out = 1;
 	}
 	__set_current_state(TASK_RUNNING);
 
@@ -300,7 +433,7 @@
 	((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1)
 
 int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
-			   fd_set __user *exp, s64 *timeout)
+			   fd_set __user *exp, struct timespec *end_time)
 {
 	fd_set_bits fds;
 	void *bits;
@@ -351,7 +484,7 @@
 	zero_fd_set(n, fds.res_out);
 	zero_fd_set(n, fds.res_ex);
 
-	ret = do_select(n, &fds, timeout);
+	ret = do_select(n, &fds, end_time);
 
 	if (ret < 0)
 		goto out;
@@ -377,7 +510,7 @@
 asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
 			fd_set __user *exp, struct timeval __user *tvp)
 {
-	s64 timeout = -1;
+	struct timespec end_time, *to = NULL;
 	struct timeval tv;
 	int ret;
 
@@ -385,43 +518,15 @@
 		if (copy_from_user(&tv, tvp, sizeof(tv)))
 			return -EFAULT;
 
-		if (tv.tv_sec < 0 || tv.tv_usec < 0)
+		to = &end_time;
+		if (poll_select_set_timeout(to,
+				tv.tv_sec + (tv.tv_usec / USEC_PER_SEC),
+				(tv.tv_usec % USEC_PER_SEC) * NSEC_PER_USEC))
 			return -EINVAL;
-
-		/* Cast to u64 to make GCC stop complaining */
-		if ((u64)tv.tv_sec >= (u64)MAX_INT64_SECONDS)
-			timeout = -1;	/* infinite */
-		else {
-			timeout = DIV_ROUND_UP(tv.tv_usec, USEC_PER_SEC/HZ);
-			timeout += tv.tv_sec * HZ;
-		}
 	}
 
-	ret = core_sys_select(n, inp, outp, exp, &timeout);
-
-	if (tvp) {
-		struct timeval rtv;
-
-		if (current->personality & STICKY_TIMEOUTS)
-			goto sticky;
-		rtv.tv_usec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ));
-		rtv.tv_sec = timeout;
-		if (timeval_compare(&rtv, &tv) >= 0)
-			rtv = tv;
-		if (copy_to_user(tvp, &rtv, sizeof(rtv))) {
-sticky:
-			/*
-			 * If an application puts its timeval in read-only
-			 * memory, we don't want the Linux-specific update to
-			 * the timeval to cause a fault after the select has
-			 * completed successfully. However, because we're not
-			 * updating the timeval, we can't restart the system
-			 * call.
-			 */
-			if (ret == -ERESTARTNOHAND)
-				ret = -EINTR;
-		}
-	}
+	ret = core_sys_select(n, inp, outp, exp, to);
+	ret = poll_select_copy_remaining(&end_time, tvp, 1, ret);
 
 	return ret;
 }
@@ -431,25 +536,17 @@
 		fd_set __user *exp, struct timespec __user *tsp,
 		const sigset_t __user *sigmask, size_t sigsetsize)
 {
-	s64 timeout = MAX_SCHEDULE_TIMEOUT;
 	sigset_t ksigmask, sigsaved;
-	struct timespec ts;
+	struct timespec ts, end_time, *to = NULL;
 	int ret;
 
 	if (tsp) {
 		if (copy_from_user(&ts, tsp, sizeof(ts)))
 			return -EFAULT;
 
-		if (ts.tv_sec < 0 || ts.tv_nsec < 0)
+		to = &end_time;
+		if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec))
 			return -EINVAL;
-
-		/* Cast to u64 to make GCC stop complaining */
-		if ((u64)ts.tv_sec >= (u64)MAX_INT64_SECONDS)
-			timeout = -1;	/* infinite */
-		else {
-			timeout = DIV_ROUND_UP(ts.tv_nsec, NSEC_PER_SEC/HZ);
-			timeout += ts.tv_sec * HZ;
-		}
 	}
 
 	if (sigmask) {
@@ -463,32 +560,8 @@
 		sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
 	}
 
-	ret = core_sys_select(n, inp, outp, exp, &timeout);
-
-	if (tsp) {
-		struct timespec rts;
-
-		if (current->personality & STICKY_TIMEOUTS)
-			goto sticky;
-		rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
-						1000;
-		rts.tv_sec = timeout;
-		if (timespec_compare(&rts, &ts) >= 0)
-			rts = ts;
-		if (copy_to_user(tsp, &rts, sizeof(rts))) {
-sticky:
-			/*
-			 * If an application puts its timeval in read-only
-			 * memory, we don't want the Linux-specific update to
-			 * the timeval to cause a fault after the select has
-			 * completed successfully. However, because we're not
-			 * updating the timeval, we can't restart the system
-			 * call.
-			 */
-			if (ret == -ERESTARTNOHAND)
-				ret = -EINTR;
-		}
-	}
+	ret = core_sys_select(n, inp, outp, exp, &end_time);
+	ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
 
 	if (ret == -ERESTARTNOHAND) {
 		/*
@@ -574,18 +647,24 @@
 }
 
 static int do_poll(unsigned int nfds,  struct poll_list *list,
-		   struct poll_wqueues *wait, s64 *timeout)
+		   struct poll_wqueues *wait, struct timespec *end_time)
 {
-	int count = 0;
 	poll_table* pt = &wait->pt;
+	ktime_t expire, *to = NULL;
+	int timed_out = 0, count = 0;
+	unsigned long slack = 0;
 
 	/* Optimise the no-wait case */
-	if (!(*timeout))
+	if (end_time && !end_time->tv_sec && !end_time->tv_nsec) {
 		pt = NULL;
+		timed_out = 1;
+	}
+
+	if (end_time && !timed_out)
+		slack = estimate_accuracy(end_time);
 
 	for (;;) {
 		struct poll_list *walk;
-		long __timeout;
 
 		set_current_state(TASK_INTERRUPTIBLE);
 		for (walk = list; walk != NULL; walk = walk->next) {
@@ -617,27 +696,21 @@
 			if (signal_pending(current))
 				count = -EINTR;
 		}
-		if (count || !*timeout)
+		if (count || timed_out)
 			break;
 
-		if (*timeout < 0) {
-			/* Wait indefinitely */
-			__timeout = MAX_SCHEDULE_TIMEOUT;
-		} else if (unlikely(*timeout >= (s64)MAX_SCHEDULE_TIMEOUT-1)) {
-			/*
-			 * Wait for longer than MAX_SCHEDULE_TIMEOUT. Do it in
-			 * a loop
-			 */
-			__timeout = MAX_SCHEDULE_TIMEOUT - 1;
-			*timeout -= __timeout;
-		} else {
-			__timeout = *timeout;
-			*timeout = 0;
+		/*
+		 * If this is the first loop and we have a timeout
+		 * given, then we convert to ktime_t and set the to
+		 * pointer to the expiry value.
+		 */
+		if (end_time && !to) {
+			expire = timespec_to_ktime(*end_time);
+			to = &expire;
 		}
 
-		__timeout = schedule_timeout(__timeout);
-		if (*timeout >= 0)
-			*timeout += __timeout;
+		if (!schedule_hrtimeout_range(to, slack, HRTIMER_MODE_ABS))
+			timed_out = 1;
 	}
 	__set_current_state(TASK_RUNNING);
 	return count;
@@ -646,7 +719,8 @@
 #define N_STACK_PPS ((sizeof(stack_pps) - sizeof(struct poll_list))  / \
 			sizeof(struct pollfd))
 
-int do_sys_poll(struct pollfd __user *ufds, unsigned int nfds, s64 *timeout)
+int do_sys_poll(struct pollfd __user *ufds, unsigned int nfds,
+		struct timespec *end_time)
 {
 	struct poll_wqueues table;
  	int err = -EFAULT, fdcount, len, size;
@@ -686,7 +760,7 @@
 	}
 
 	poll_initwait(&table);
-	fdcount = do_poll(nfds, head, &table, timeout);
+	fdcount = do_poll(nfds, head, &table, end_time);
 	poll_freewait(&table);
 
 	for (walk = head; walk; walk = walk->next) {
@@ -712,16 +786,21 @@
 
 static long do_restart_poll(struct restart_block *restart_block)
 {
-	struct pollfd __user *ufds = (struct pollfd __user*)restart_block->arg0;
-	int nfds = restart_block->arg1;
-	s64 timeout = ((s64)restart_block->arg3<<32) | (s64)restart_block->arg2;
+	struct pollfd __user *ufds = restart_block->poll.ufds;
+	int nfds = restart_block->poll.nfds;
+	struct timespec *to = NULL, end_time;
 	int ret;
 
-	ret = do_sys_poll(ufds, nfds, &timeout);
+	if (restart_block->poll.has_timeout) {
+		end_time.tv_sec = restart_block->poll.tv_sec;
+		end_time.tv_nsec = restart_block->poll.tv_nsec;
+		to = &end_time;
+	}
+
+	ret = do_sys_poll(ufds, nfds, to);
+
 	if (ret == -EINTR) {
 		restart_block->fn = do_restart_poll;
-		restart_block->arg2 = timeout & 0xFFFFFFFF;
-		restart_block->arg3 = (u64)timeout >> 32;
 		ret = -ERESTART_RESTARTBLOCK;
 	}
 	return ret;
@@ -730,31 +809,32 @@
 asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
 			long timeout_msecs)
 {
-	s64 timeout_jiffies;
+	struct timespec end_time, *to = NULL;
 	int ret;
 
-	if (timeout_msecs > 0) {
-#if HZ > 1000
-		/* We can only overflow if HZ > 1000 */
-		if (timeout_msecs / 1000 > (s64)0x7fffffffffffffffULL / (s64)HZ)
-			timeout_jiffies = -1;
-		else
-#endif
-			timeout_jiffies = msecs_to_jiffies(timeout_msecs) + 1;
-	} else {
-		/* Infinite (< 0) or no (0) timeout */
-		timeout_jiffies = timeout_msecs;
+	if (timeout_msecs >= 0) {
+		to = &end_time;
+		poll_select_set_timeout(to, timeout_msecs / MSEC_PER_SEC,
+			NSEC_PER_MSEC * (timeout_msecs % MSEC_PER_SEC));
 	}
 
-	ret = do_sys_poll(ufds, nfds, &timeout_jiffies);
+	ret = do_sys_poll(ufds, nfds, to);
+
 	if (ret == -EINTR) {
 		struct restart_block *restart_block;
+
 		restart_block = &current_thread_info()->restart_block;
 		restart_block->fn = do_restart_poll;
-		restart_block->arg0 = (unsigned long)ufds;
-		restart_block->arg1 = nfds;
-		restart_block->arg2 = timeout_jiffies & 0xFFFFFFFF;
-		restart_block->arg3 = (u64)timeout_jiffies >> 32;
+		restart_block->poll.ufds = ufds;
+		restart_block->poll.nfds = nfds;
+
+		if (timeout_msecs >= 0) {
+			restart_block->poll.tv_sec = end_time.tv_sec;
+			restart_block->poll.tv_nsec = end_time.tv_nsec;
+			restart_block->poll.has_timeout = 1;
+		} else
+			restart_block->poll.has_timeout = 0;
+
 		ret = -ERESTART_RESTARTBLOCK;
 	}
 	return ret;
@@ -766,21 +846,16 @@
 	size_t sigsetsize)
 {
 	sigset_t ksigmask, sigsaved;
-	struct timespec ts;
-	s64 timeout = -1;
+	struct timespec ts, end_time, *to = NULL;
 	int ret;
 
 	if (tsp) {
 		if (copy_from_user(&ts, tsp, sizeof(ts)))
 			return -EFAULT;
 
-		/* Cast to u64 to make GCC stop complaining */
-		if ((u64)ts.tv_sec >= (u64)MAX_INT64_SECONDS)
-			timeout = -1;	/* infinite */
-		else {
-			timeout = DIV_ROUND_UP(ts.tv_nsec, NSEC_PER_SEC/HZ);
-			timeout += ts.tv_sec * HZ;
-		}
+		to = &end_time;
+		if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec))
+			return -EINVAL;
 	}
 
 	if (sigmask) {
@@ -794,7 +869,7 @@
 		sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
 	}
 
-	ret = do_sys_poll(ufds, nfds, &timeout);
+	ret = do_sys_poll(ufds, nfds, to);
 
 	/* We can restart this syscall, usually */
 	if (ret == -EINTR) {
@@ -812,31 +887,7 @@
 	} else if (sigmask)
 		sigprocmask(SIG_SETMASK, &sigsaved, NULL);
 
-	if (tsp && timeout >= 0) {
-		struct timespec rts;
-
-		if (current->personality & STICKY_TIMEOUTS)
-			goto sticky;
-		/* Yes, we know it's actually an s64, but it's also positive. */
-		rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
-						1000;
-		rts.tv_sec = timeout;
-		if (timespec_compare(&rts, &ts) >= 0)
-			rts = ts;
-		if (copy_to_user(tsp, &rts, sizeof(rts))) {
-		sticky:
-			/*
-			 * If an application puts its timeval in read-only
-			 * memory, we don't want the Linux-specific update to
-			 * the timeval to cause a fault after the select has
-			 * completed successfully. However, because we're not
-			 * updating the timeval, we can't restart the system
-			 * call.
-			 */
-			if (ret == -ERESTARTNOHAND && timeout >= 0)
-				ret = -EINTR;
-		}
-	}
+	ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
 
 	return ret;
 }
diff --git a/fs/super.c b/fs/super.c
index e931ae9..400a760 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -682,7 +682,7 @@
  * filesystems which don't use real block-devices.  -- jrs
  */
 
-static struct idr unnamed_dev_idr;
+static DEFINE_IDA(unnamed_dev_ida);
 static DEFINE_SPINLOCK(unnamed_dev_lock);/* protects the above */
 
 int set_anon_super(struct super_block *s, void *data)
@@ -691,10 +691,10 @@
 	int error;
 
  retry:
-	if (idr_pre_get(&unnamed_dev_idr, GFP_ATOMIC) == 0)
+	if (ida_pre_get(&unnamed_dev_ida, GFP_ATOMIC) == 0)
 		return -ENOMEM;
 	spin_lock(&unnamed_dev_lock);
-	error = idr_get_new(&unnamed_dev_idr, NULL, &dev);
+	error = ida_get_new(&unnamed_dev_ida, &dev);
 	spin_unlock(&unnamed_dev_lock);
 	if (error == -EAGAIN)
 		/* We raced and lost with another CPU. */
@@ -704,7 +704,7 @@
 
 	if ((dev & MAX_ID_MASK) == (1 << MINORBITS)) {
 		spin_lock(&unnamed_dev_lock);
-		idr_remove(&unnamed_dev_idr, dev);
+		ida_remove(&unnamed_dev_ida, dev);
 		spin_unlock(&unnamed_dev_lock);
 		return -EMFILE;
 	}
@@ -720,17 +720,12 @@
 
 	generic_shutdown_super(sb);
 	spin_lock(&unnamed_dev_lock);
-	idr_remove(&unnamed_dev_idr, slot);
+	ida_remove(&unnamed_dev_ida, slot);
 	spin_unlock(&unnamed_dev_lock);
 }
 
 EXPORT_SYMBOL(kill_anon_super);
 
-void __init unnamed_dev_init(void)
-{
-	idr_init(&unnamed_dev_idr);
-}
-
 void kill_litter_super(struct super_block *sb)
 {
 	if (sb->s_root)
@@ -760,9 +755,13 @@
 {
 	struct block_device *bdev;
 	struct super_block *s;
+	fmode_t mode = FMODE_READ;
 	int error = 0;
 
-	bdev = open_bdev_excl(dev_name, flags, fs_type);
+	if (!(flags & MS_RDONLY))
+		mode |= FMODE_WRITE;
+
+	bdev = open_bdev_exclusive(dev_name, mode, fs_type);
 	if (IS_ERR(bdev))
 		return PTR_ERR(bdev);
 
@@ -785,11 +784,12 @@
 			goto error_bdev;
 		}
 
-		close_bdev_excl(bdev);
+		close_bdev_exclusive(bdev, mode);
 	} else {
 		char b[BDEVNAME_SIZE];
 
 		s->s_flags = flags;
+		s->s_mode = mode;
 		strlcpy(s->s_id, bdevname(bdev, b), sizeof(s->s_id));
 		sb_set_blocksize(s, block_size(bdev));
 		error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
@@ -807,7 +807,7 @@
 error_s:
 	error = PTR_ERR(s);
 error_bdev:
-	close_bdev_excl(bdev);
+	close_bdev_exclusive(bdev, mode);
 error:
 	return error;
 }
@@ -817,10 +817,11 @@
 void kill_block_super(struct super_block *sb)
 {
 	struct block_device *bdev = sb->s_bdev;
+	fmode_t mode = sb->s_mode;
 
 	generic_shutdown_super(sb);
 	sync_blockdev(bdev);
-	close_bdev_excl(bdev);
+	close_bdev_exclusive(bdev, mode);
 }
 
 EXPORT_SYMBOL(kill_block_super);
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 3a05a59..82d3b79 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -983,4 +983,5 @@
 const struct file_operations sysfs_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= sysfs_readdir,
+	.llseek		= generic_file_llseek,
 };
diff --git a/fs/timerfd.c b/fs/timerfd.c
index c502c60..0862f0e 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -52,11 +52,9 @@
 
 static ktime_t timerfd_get_remaining(struct timerfd_ctx *ctx)
 {
-	ktime_t now, remaining;
+	ktime_t remaining;
 
-	now = ctx->tmr.base->get_time();
-	remaining = ktime_sub(ctx->tmr.expires, now);
-
+	remaining = hrtimer_expires_remaining(&ctx->tmr);
 	return remaining.tv64 < 0 ? ktime_set(0, 0): remaining;
 }
 
@@ -74,7 +72,7 @@
 	ctx->ticks = 0;
 	ctx->tintv = timespec_to_ktime(ktmr->it_interval);
 	hrtimer_init(&ctx->tmr, ctx->clockid, htmode);
-	ctx->tmr.expires = texp;
+	hrtimer_set_expires(&ctx->tmr, texp);
 	ctx->tmr.function = timerfd_tmrproc;
 	if (texp.tv64 != 0)
 		hrtimer_start(&ctx->tmr, texp, htmode);
diff --git a/fs/udf/namei.c b/fs/udf/namei.c
index d3231947..082409c 100644
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -142,7 +142,7 @@
 }
 
 static struct fileIdentDesc *udf_find_entry(struct inode *dir,
-					    struct dentry *dentry,
+					    struct qstr *child,
 					    struct udf_fileident_bh *fibh,
 					    struct fileIdentDesc *cfi)
 {
@@ -159,8 +159,8 @@
 	sector_t offset;
 	struct extent_position epos = {};
 	struct udf_inode_info *dinfo = UDF_I(dir);
-	int isdotdot = dentry->d_name.len == 2 &&
-		dentry->d_name.name[0] == '.' && dentry->d_name.name[1] == '.';
+	int isdotdot = child->len == 2 &&
+		child->name[0] == '.' && child->name[1] == '.';
 
 	size = udf_ext0_offset(dir) + dir->i_size;
 	f_pos = udf_ext0_offset(dir);
@@ -238,8 +238,7 @@
 			continue;
 
 		flen = udf_get_filename(dir->i_sb, nameptr, fname, lfi);
-		if (flen && udf_match(flen, fname, dentry->d_name.len,
-				      dentry->d_name.name))
+		if (flen && udf_match(flen, fname, child->len, child->name))
 			goto out_ok;
 	}
 
@@ -283,7 +282,7 @@
 	} else
 #endif /* UDF_RECOVERY */
 
-	if (udf_find_entry(dir, dentry, &fibh, &cfi)) {
+	if (udf_find_entry(dir, &dentry->d_name, &fibh, &cfi)) {
 		if (fibh.sbh != fibh.ebh)
 			brelse(fibh.ebh);
 		brelse(fibh.sbh);
@@ -783,7 +782,7 @@
 
 	retval = -ENOENT;
 	lock_kernel();
-	fi = udf_find_entry(dir, dentry, &fibh, &cfi);
+	fi = udf_find_entry(dir, &dentry->d_name, &fibh, &cfi);
 	if (!fi)
 		goto out;
 
@@ -829,7 +828,7 @@
 
 	retval = -ENOENT;
 	lock_kernel();
-	fi = udf_find_entry(dir, dentry, &fibh, &cfi);
+	fi = udf_find_entry(dir, &dentry->d_name, &fibh, &cfi);
 	if (!fi)
 		goto out;
 
@@ -1113,7 +1112,7 @@
 	struct udf_inode_info *old_iinfo = UDF_I(old_inode);
 
 	lock_kernel();
-	ofi = udf_find_entry(old_dir, old_dentry, &ofibh, &ocfi);
+	ofi = udf_find_entry(old_dir, &old_dentry->d_name, &ofibh, &ocfi);
 	if (ofi) {
 		if (ofibh.sbh != ofibh.ebh)
 			brelse(ofibh.ebh);
@@ -1124,7 +1123,7 @@
 	    != old_inode->i_ino)
 		goto end_rename;
 
-	nfi = udf_find_entry(new_dir, new_dentry, &nfibh, &ncfi);
+	nfi = udf_find_entry(new_dir, &new_dentry->d_name, &nfibh, &ncfi);
 	if (nfi) {
 		if (!new_inode) {
 			if (nfibh.sbh != nfibh.ebh)
@@ -1192,7 +1191,7 @@
 	udf_write_fi(new_dir, &ncfi, nfi, &nfibh, NULL, NULL);
 
 	/* The old fid may have moved - find it again */
-	ofi = udf_find_entry(old_dir, old_dentry, &ofibh, &ocfi);
+	ofi = udf_find_entry(old_dir, &old_dentry->d_name, &ofibh, &ocfi);
 	udf_delete_entry(old_dir, ofi, &ofibh, &ocfi);
 
 	if (new_inode) {
@@ -1243,15 +1242,11 @@
 
 static struct dentry *udf_get_parent(struct dentry *child)
 {
-	struct dentry *parent;
 	struct inode *inode = NULL;
-	struct dentry dotdot;
+	struct qstr dotdot = {.name = "..", .len = 2};
 	struct fileIdentDesc cfi;
 	struct udf_fileident_bh fibh;
 
-	dotdot.d_name.name = "..";
-	dotdot.d_name.len = 2;
-
 	lock_kernel();
 	if (!udf_find_entry(child->d_inode, &dotdot, &fibh, &cfi))
 		goto out_unlock;
@@ -1266,13 +1261,7 @@
 		goto out_unlock;
 	unlock_kernel();
 
-	parent = d_alloc_anon(inode);
-	if (!parent) {
-		iput(inode);
-		parent = ERR_PTR(-ENOMEM);
-	}
-
-	return parent;
+	return d_obtain_alias(inode);
 out_unlock:
 	unlock_kernel();
 	return ERR_PTR(-EACCES);
@@ -1283,7 +1272,6 @@
 					u16 partref, __u32 generation)
 {
 	struct inode *inode;
-	struct dentry *result;
 	kernel_lb_addr loc;
 
 	if (block == 0)
@@ -1300,12 +1288,7 @@
 		iput(inode);
 		return ERR_PTR(-ESTALE);
 	}
-	result = d_alloc_anon(inode);
-	if (!result) {
-		iput(inode);
-		return ERR_PTR(-ENOMEM);
-	}
-	return result;
+	return d_obtain_alias(inode);
 }
 
 static struct dentry *udf_fh_to_dentry(struct super_block *sb,
diff --git a/fs/ufs/dir.c b/fs/ufs/dir.c
index df0bef1..dbbbc46 100644
--- a/fs/ufs/dir.c
+++ b/fs/ufs/dir.c
@@ -667,4 +667,5 @@
 	.read		= generic_read_dir,
 	.readdir	= ufs_readdir,
 	.fsync		= file_fsync,
+	.llseek		= generic_file_llseek,
 };
diff --git a/fs/xfs/linux-2.6/xfs_export.c b/fs/xfs/linux-2.6/xfs_export.c
index 24fd598..7f7abec 100644
--- a/fs/xfs/linux-2.6/xfs_export.c
+++ b/fs/xfs/linux-2.6/xfs_export.c
@@ -148,7 +148,6 @@
 {
 	struct xfs_fid64	*fid64 = (struct xfs_fid64 *)fid;
 	struct inode		*inode = NULL;
-	struct dentry		*result;
 
 	if (fh_len < xfs_fileid_length(fileid_type))
 		return NULL;
@@ -164,16 +163,7 @@
 		break;
 	}
 
-	if (!inode)
-		return NULL;
-	if (IS_ERR(inode))
-		return ERR_CAST(inode);
-	result = d_alloc_anon(inode);
-	if (!result) {
-		iput(inode);
-		return ERR_PTR(-ENOMEM);
-	}
-	return result;
+	return d_obtain_alias(inode);
 }
 
 STATIC struct dentry *
@@ -182,7 +172,6 @@
 {
 	struct xfs_fid64	*fid64 = (struct xfs_fid64 *)fid;
 	struct inode		*inode = NULL;
-	struct dentry		*result;
 
 	switch (fileid_type) {
 	case FILEID_INO32_GEN_PARENT:
@@ -195,16 +184,7 @@
 		break;
 	}
 
-	if (!inode)
-		return NULL;
-	if (IS_ERR(inode))
-		return ERR_CAST(inode);
-	result = d_alloc_anon(inode);
-	if (!result) {
-		iput(inode);
-		return ERR_PTR(-ENOMEM);
-	}
-	return result;
+	return d_obtain_alias(inode);
 }
 
 STATIC struct dentry *
@@ -213,18 +193,12 @@
 {
 	int			error;
 	struct xfs_inode	*cip;
-	struct dentry		*parent;
 
 	error = xfs_lookup(XFS_I(child->d_inode), &xfs_name_dotdot, &cip, NULL);
 	if (unlikely(error))
 		return ERR_PTR(-error);
 
-	parent = d_alloc_anon(VFS_I(cip));
-	if (unlikely(!parent)) {
-		iput(VFS_I(cip));
-		return ERR_PTR(-ENOMEM);
-	}
-	return parent;
+	return d_obtain_alias(VFS_I(cip));
 }
 
 const struct export_operations xfs_export_operations = {
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 5311c1a..3fee790 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -204,15 +204,6 @@
 	return -xfs_fsync(XFS_I(dentry->d_inode));
 }
 
-/*
- * Unfortunately we can't just use the clean and simple readdir implementation
- * below, because nfs might call back into ->lookup from the filldir callback
- * and that will deadlock the low-level btree code.
- *
- * Hopefully we'll find a better workaround that allows to use the optimal
- * version at least for local readdirs for 2.6.25.
- */
-#if 0
 STATIC int
 xfs_file_readdir(
 	struct file	*filp,
@@ -244,125 +235,6 @@
 		return -error;
 	return 0;
 }
-#else
-
-struct hack_dirent {
-	u64		ino;
-	loff_t		offset;
-	int		namlen;
-	unsigned int	d_type;
-	char		name[];
-};
-
-struct hack_callback {
-	char		*dirent;
-	size_t		len;
-	size_t		used;
-};
-
-STATIC int
-xfs_hack_filldir(
-	void		*__buf,
-	const char	*name,
-	int		namlen,
-	loff_t		offset,
-	u64		ino,
-	unsigned int	d_type)
-{
-	struct hack_callback *buf = __buf;
-	struct hack_dirent *de = (struct hack_dirent *)(buf->dirent + buf->used);
-	unsigned int reclen;
-
-	reclen = ALIGN(sizeof(struct hack_dirent) + namlen, sizeof(u64));
-	if (buf->used + reclen > buf->len)
-		return -EINVAL;
-
-	de->namlen = namlen;
-	de->offset = offset;
-	de->ino = ino;
-	de->d_type = d_type;
-	memcpy(de->name, name, namlen);
-	buf->used += reclen;
-	return 0;
-}
-
-STATIC int
-xfs_file_readdir(
-	struct file	*filp,
-	void		*dirent,
-	filldir_t	filldir)
-{
-	struct inode	*inode = filp->f_path.dentry->d_inode;
-	xfs_inode_t	*ip = XFS_I(inode);
-	struct hack_callback buf;
-	struct hack_dirent *de;
-	int		error;
-	loff_t		size;
-	int		eof = 0;
-	xfs_off_t       start_offset, curr_offset, offset;
-
-	/*
-	 * Try fairly hard to get memory
-	 */
-	buf.len = PAGE_CACHE_SIZE;
-	do {
-		buf.dirent = kmalloc(buf.len, GFP_KERNEL);
-		if (buf.dirent)
-			break;
-		buf.len >>= 1;
-	} while (buf.len >= 1024);
-
-	if (!buf.dirent)
-		return -ENOMEM;
-
-	curr_offset = filp->f_pos;
-	if (curr_offset == 0x7fffffff)
-		offset = 0xffffffff;
-	else
-		offset = filp->f_pos;
-
-	while (!eof) {
-		unsigned int reclen;
-
-		start_offset = offset;
-
-		buf.used = 0;
-		error = -xfs_readdir(ip, &buf, buf.len, &offset,
-				     xfs_hack_filldir);
-		if (error || offset == start_offset) {
-			size = 0;
-			break;
-		}
-
-		size = buf.used;
-		de = (struct hack_dirent *)buf.dirent;
-		while (size > 0) {
-			curr_offset = de->offset /* & 0x7fffffff */;
-			if (filldir(dirent, de->name, de->namlen,
-					curr_offset & 0x7fffffff,
-					de->ino, de->d_type)) {
-				goto done;
-			}
-
-			reclen = ALIGN(sizeof(struct hack_dirent) + de->namlen,
-				       sizeof(u64));
-			size -= reclen;
-			de = (struct hack_dirent *)((char *)de + reclen);
-		}
-	}
-
- done:
-	if (!error) {
-		if (size == 0)
-			filp->f_pos = offset & 0x7fffffff;
-		else if (de)
-			filp->f_pos = curr_offset;
-	}
-
-	kfree(buf.dirent);
-	return error;
-}
-#endif
 
 STATIC int
 xfs_file_mmap(
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index 48799ba..d3438c7 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -311,11 +311,10 @@
 		return new_fd;
 	}
 
-	dentry = d_alloc_anon(inode);
-	if (dentry == NULL) {
-		iput(inode);
+	dentry = d_obtain_alias(inode);
+	if (IS_ERR(dentry)) {
 		put_unused_fd(new_fd);
-		return -XFS_ERROR(ENOMEM);
+		return PTR_ERR(dentry);
 	}
 
 	/* Ensure umount returns EBUSY on umounts while this file is open. */
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index e390136..37ebe36 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -589,7 +589,7 @@
 {
 	int			error = 0;
 
-	*bdevp = open_bdev_excl(name, 0, mp);
+	*bdevp = open_bdev_exclusive(name, FMODE_READ|FMODE_WRITE, mp);
 	if (IS_ERR(*bdevp)) {
 		error = PTR_ERR(*bdevp);
 		printk("XFS: Invalid device [%s], error=%d\n", name, error);
@@ -603,7 +603,7 @@
 	struct block_device	*bdev)
 {
 	if (bdev)
-		close_bdev_excl(bdev);
+		close_bdev_exclusive(bdev, FMODE_READ|FMODE_WRITE);
 }
 
 /*
diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h
index 4eb75a8..29feee2 100644
--- a/include/acpi/acconfig.h
+++ b/include/acpi/acconfig.h
@@ -63,7 +63,7 @@
 
 /* Current ACPICA subsystem version in YYYYMMDD format */
 
-#define ACPI_CA_VERSION 		0x20080609
+#define ACPI_CA_VERSION                 0x20080926
 
 /*
  * OS name, used for the _OS object.  The _OS object is essentially obsolete,
diff --git a/include/acpi/acdebug.h b/include/acpi/acdebug.h
index c5a1b50..62c59df 100644
--- a/include/acpi/acdebug.h
+++ b/include/acpi/acdebug.h
@@ -123,6 +123,10 @@
 
 void acpi_db_generate_gpe(char *gpe_arg, char *block_arg);
 
+void acpi_db_check_predefined_names(void);
+
+void acpi_db_batch_execute(void);
+
 /*
  * dbdisply - debug display commands
  */
@@ -150,6 +154,10 @@
 acpi_db_display_argument_object(union acpi_operand_object *obj_desc,
 				struct acpi_walk_state *walk_state);
 
+void acpi_db_check_predefined_names(void);
+
+void acpi_db_batch_execute(void);
+
 /*
  * dbexec - debugger control method execution
  */
diff --git a/include/acpi/acdisasm.h b/include/acpi/acdisasm.h
index f53faca..0c1ed38 100644
--- a/include/acpi/acdisasm.h
+++ b/include/acpi/acdisasm.h
@@ -186,6 +186,8 @@
 extern struct acpi_dmtable_info acpi_dm_table_info_madt6[];
 extern struct acpi_dmtable_info acpi_dm_table_info_madt7[];
 extern struct acpi_dmtable_info acpi_dm_table_info_madt8[];
+extern struct acpi_dmtable_info acpi_dm_table_info_madt9[];
+extern struct acpi_dmtable_info acpi_dm_table_info_madt10[];
 extern struct acpi_dmtable_info acpi_dm_table_info_madt_hdr[];
 extern struct acpi_dmtable_info acpi_dm_table_info_mcfg[];
 extern struct acpi_dmtable_info acpi_dm_table_info_mcfg0[];
@@ -197,8 +199,10 @@
 extern struct acpi_dmtable_info acpi_dm_table_info_spcr[];
 extern struct acpi_dmtable_info acpi_dm_table_info_spmi[];
 extern struct acpi_dmtable_info acpi_dm_table_info_srat[];
+extern struct acpi_dmtable_info acpi_dm_table_info_srat_hdr[];
 extern struct acpi_dmtable_info acpi_dm_table_info_srat0[];
 extern struct acpi_dmtable_info acpi_dm_table_info_srat1[];
+extern struct acpi_dmtable_info acpi_dm_table_info_srat2[];
 extern struct acpi_dmtable_info acpi_dm_table_info_tcpa[];
 extern struct acpi_dmtable_info acpi_dm_table_info_wdrt[];
 
diff --git a/include/acpi/acdispat.h b/include/acpi/acdispat.h
index 21a73a1..6291904 100644
--- a/include/acpi/acdispat.h
+++ b/include/acpi/acdispat.h
@@ -157,7 +157,7 @@
  * dsmthdat - method data (locals/args)
  */
 acpi_status
-acpi_ds_store_object_to_local(u16 opcode,
+acpi_ds_store_object_to_local(u8 type,
 			      u32 index,
 			      union acpi_operand_object *src_desc,
 			      struct acpi_walk_state *walk_state);
@@ -173,7 +173,7 @@
 u8 acpi_ds_is_method_value(union acpi_operand_object *obj_desc);
 
 acpi_status
-acpi_ds_method_data_get_value(u16 opcode,
+acpi_ds_method_data_get_value(u8 type,
 			      u32 index,
 			      struct acpi_walk_state *walk_state,
 			      union acpi_operand_object **dest_desc);
@@ -184,7 +184,7 @@
 			      struct acpi_walk_state *walk_state);
 
 acpi_status
-acpi_ds_method_data_get_node(u16 opcode,
+acpi_ds_method_data_get_node(u8 type,
 			     u32 index,
 			     struct acpi_walk_state *walk_state,
 			     struct acpi_namespace_node **node);
diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
index e5a890f..84f5cb2 100644
--- a/include/acpi/acexcep.h
+++ b/include/acpi/acexcep.h
@@ -76,25 +76,21 @@
 #define AE_STACK_OVERFLOW               (acpi_status) (0x000C | AE_CODE_ENVIRONMENTAL)
 #define AE_STACK_UNDERFLOW              (acpi_status) (0x000D | AE_CODE_ENVIRONMENTAL)
 #define AE_NOT_IMPLEMENTED              (acpi_status) (0x000E | AE_CODE_ENVIRONMENTAL)
-#define AE_VERSION_MISMATCH             (acpi_status) (0x000F | AE_CODE_ENVIRONMENTAL)
-#define AE_SUPPORT                      (acpi_status) (0x0010 | AE_CODE_ENVIRONMENTAL)
-#define AE_SHARE                        (acpi_status) (0x0011 | AE_CODE_ENVIRONMENTAL)
-#define AE_LIMIT                        (acpi_status) (0x0012 | AE_CODE_ENVIRONMENTAL)
-#define AE_TIME                         (acpi_status) (0x0013 | AE_CODE_ENVIRONMENTAL)
-#define AE_UNKNOWN_STATUS               (acpi_status) (0x0014 | AE_CODE_ENVIRONMENTAL)
-#define AE_ACQUIRE_DEADLOCK             (acpi_status) (0x0015 | AE_CODE_ENVIRONMENTAL)
-#define AE_RELEASE_DEADLOCK             (acpi_status) (0x0016 | AE_CODE_ENVIRONMENTAL)
-#define AE_NOT_ACQUIRED                 (acpi_status) (0x0017 | AE_CODE_ENVIRONMENTAL)
-#define AE_ALREADY_ACQUIRED             (acpi_status) (0x0018 | AE_CODE_ENVIRONMENTAL)
-#define AE_NO_HARDWARE_RESPONSE         (acpi_status) (0x0019 | AE_CODE_ENVIRONMENTAL)
-#define AE_NO_GLOBAL_LOCK               (acpi_status) (0x001A | AE_CODE_ENVIRONMENTAL)
-#define AE_LOGICAL_ADDRESS              (acpi_status) (0x001B | AE_CODE_ENVIRONMENTAL)
-#define AE_ABORT_METHOD                 (acpi_status) (0x001C | AE_CODE_ENVIRONMENTAL)
-#define AE_SAME_HANDLER                 (acpi_status) (0x001D | AE_CODE_ENVIRONMENTAL)
-#define AE_WAKE_ONLY_GPE                (acpi_status) (0x001E | AE_CODE_ENVIRONMENTAL)
-#define AE_OWNER_ID_LIMIT               (acpi_status) (0x001F | AE_CODE_ENVIRONMENTAL)
+#define AE_SUPPORT                      (acpi_status) (0x000F | AE_CODE_ENVIRONMENTAL)
+#define AE_LIMIT                        (acpi_status) (0x0010 | AE_CODE_ENVIRONMENTAL)
+#define AE_TIME                         (acpi_status) (0x0011 | AE_CODE_ENVIRONMENTAL)
+#define AE_ACQUIRE_DEADLOCK             (acpi_status) (0x0012 | AE_CODE_ENVIRONMENTAL)
+#define AE_RELEASE_DEADLOCK             (acpi_status) (0x0013 | AE_CODE_ENVIRONMENTAL)
+#define AE_NOT_ACQUIRED                 (acpi_status) (0x0014 | AE_CODE_ENVIRONMENTAL)
+#define AE_ALREADY_ACQUIRED             (acpi_status) (0x0015 | AE_CODE_ENVIRONMENTAL)
+#define AE_NO_HARDWARE_RESPONSE         (acpi_status) (0x0016 | AE_CODE_ENVIRONMENTAL)
+#define AE_NO_GLOBAL_LOCK               (acpi_status) (0x0017 | AE_CODE_ENVIRONMENTAL)
+#define AE_ABORT_METHOD                 (acpi_status) (0x0018 | AE_CODE_ENVIRONMENTAL)
+#define AE_SAME_HANDLER                 (acpi_status) (0x0019 | AE_CODE_ENVIRONMENTAL)
+#define AE_WAKE_ONLY_GPE                (acpi_status) (0x001A | AE_CODE_ENVIRONMENTAL)
+#define AE_OWNER_ID_LIMIT               (acpi_status) (0x001B | AE_CODE_ENVIRONMENTAL)
 
-#define AE_CODE_ENV_MAX                 0x001F
+#define AE_CODE_ENV_MAX                 0x001B
 
 /*
  * Programmer exceptions
@@ -103,14 +99,12 @@
 #define AE_BAD_CHARACTER                (acpi_status) (0x0002 | AE_CODE_PROGRAMMER)
 #define AE_BAD_PATHNAME                 (acpi_status) (0x0003 | AE_CODE_PROGRAMMER)
 #define AE_BAD_DATA                     (acpi_status) (0x0004 | AE_CODE_PROGRAMMER)
-#define AE_BAD_ADDRESS                  (acpi_status) (0x0005 | AE_CODE_PROGRAMMER)
-#define AE_ALIGNMENT                    (acpi_status) (0x0006 | AE_CODE_PROGRAMMER)
-#define AE_BAD_HEX_CONSTANT             (acpi_status) (0x0007 | AE_CODE_PROGRAMMER)
-#define AE_BAD_OCTAL_CONSTANT           (acpi_status) (0x0008 | AE_CODE_PROGRAMMER)
-#define AE_BAD_DECIMAL_CONSTANT         (acpi_status) (0x0009 | AE_CODE_PROGRAMMER)
-#define AE_MISSING_ARGUMENTS		(acpi_status) (0x000A | AE_CODE_PROGRAMMER)
+#define AE_BAD_HEX_CONSTANT             (acpi_status) (0x0005 | AE_CODE_PROGRAMMER)
+#define AE_BAD_OCTAL_CONSTANT           (acpi_status) (0x0006 | AE_CODE_PROGRAMMER)
+#define AE_BAD_DECIMAL_CONSTANT         (acpi_status) (0x0007 | AE_CODE_PROGRAMMER)
+#define AE_MISSING_ARGUMENTS            (acpi_status) (0x0008 | AE_CODE_PROGRAMMER)
 
-#define AE_CODE_PGM_MAX 		0x000A
+#define AE_CODE_PGM_MAX                 0x0008
 
 /*
  * Acpi table exceptions
@@ -119,51 +113,48 @@
 #define AE_BAD_HEADER                   (acpi_status) (0x0002 | AE_CODE_ACPI_TABLES)
 #define AE_BAD_CHECKSUM                 (acpi_status) (0x0003 | AE_CODE_ACPI_TABLES)
 #define AE_BAD_VALUE                    (acpi_status) (0x0004 | AE_CODE_ACPI_TABLES)
-#define AE_TABLE_NOT_SUPPORTED          (acpi_status) (0x0005 | AE_CODE_ACPI_TABLES)
-#define AE_INVALID_TABLE_LENGTH         (acpi_status) (0x0006 | AE_CODE_ACPI_TABLES)
+#define AE_INVALID_TABLE_LENGTH         (acpi_status) (0x0005 | AE_CODE_ACPI_TABLES)
 
-#define AE_CODE_TBL_MAX                 0x0006
+#define AE_CODE_TBL_MAX                 0x0005
 
 /*
  * AML exceptions.  These are caused by problems with
  * the actual AML byte stream
  */
-#define AE_AML_ERROR                    (acpi_status) (0x0001 | AE_CODE_AML)
-#define AE_AML_PARSE                    (acpi_status) (0x0002 | AE_CODE_AML)
-#define AE_AML_BAD_OPCODE               (acpi_status) (0x0003 | AE_CODE_AML)
-#define AE_AML_NO_OPERAND               (acpi_status) (0x0004 | AE_CODE_AML)
-#define AE_AML_OPERAND_TYPE             (acpi_status) (0x0005 | AE_CODE_AML)
-#define AE_AML_OPERAND_VALUE            (acpi_status) (0x0006 | AE_CODE_AML)
-#define AE_AML_UNINITIALIZED_LOCAL      (acpi_status) (0x0007 | AE_CODE_AML)
-#define AE_AML_UNINITIALIZED_ARG        (acpi_status) (0x0008 | AE_CODE_AML)
-#define AE_AML_UNINITIALIZED_ELEMENT    (acpi_status) (0x0009 | AE_CODE_AML)
-#define AE_AML_NUMERIC_OVERFLOW         (acpi_status) (0x000A | AE_CODE_AML)
-#define AE_AML_REGION_LIMIT             (acpi_status) (0x000B | AE_CODE_AML)
-#define AE_AML_BUFFER_LIMIT             (acpi_status) (0x000C | AE_CODE_AML)
-#define AE_AML_PACKAGE_LIMIT            (acpi_status) (0x000D | AE_CODE_AML)
-#define AE_AML_DIVIDE_BY_ZERO           (acpi_status) (0x000E | AE_CODE_AML)
-#define AE_AML_BAD_NAME                 (acpi_status) (0x000F | AE_CODE_AML)
-#define AE_AML_NAME_NOT_FOUND           (acpi_status) (0x0010 | AE_CODE_AML)
-#define AE_AML_INTERNAL                 (acpi_status) (0x0011 | AE_CODE_AML)
-#define AE_AML_INVALID_SPACE_ID         (acpi_status) (0x0012 | AE_CODE_AML)
-#define AE_AML_STRING_LIMIT             (acpi_status) (0x0013 | AE_CODE_AML)
-#define AE_AML_NO_RETURN_VALUE          (acpi_status) (0x0014 | AE_CODE_AML)
-#define AE_AML_METHOD_LIMIT             (acpi_status) (0x0015 | AE_CODE_AML)
-#define AE_AML_NOT_OWNER                (acpi_status) (0x0016 | AE_CODE_AML)
-#define AE_AML_MUTEX_ORDER              (acpi_status) (0x0017 | AE_CODE_AML)
-#define AE_AML_MUTEX_NOT_ACQUIRED       (acpi_status) (0x0018 | AE_CODE_AML)
-#define AE_AML_INVALID_RESOURCE_TYPE    (acpi_status) (0x0019 | AE_CODE_AML)
-#define AE_AML_INVALID_INDEX            (acpi_status) (0x001A | AE_CODE_AML)
-#define AE_AML_REGISTER_LIMIT           (acpi_status) (0x001B | AE_CODE_AML)
-#define AE_AML_NO_WHILE                 (acpi_status) (0x001C | AE_CODE_AML)
-#define AE_AML_ALIGNMENT                (acpi_status) (0x001D | AE_CODE_AML)
-#define AE_AML_NO_RESOURCE_END_TAG      (acpi_status) (0x001E | AE_CODE_AML)
-#define AE_AML_BAD_RESOURCE_VALUE       (acpi_status) (0x001F | AE_CODE_AML)
-#define AE_AML_CIRCULAR_REFERENCE       (acpi_status) (0x0020 | AE_CODE_AML)
-#define AE_AML_BAD_RESOURCE_LENGTH      (acpi_status) (0x0021 | AE_CODE_AML)
-#define AE_AML_ILLEGAL_ADDRESS          (acpi_status) (0x0022 | AE_CODE_AML)
+#define AE_AML_BAD_OPCODE               (acpi_status) (0x0001 | AE_CODE_AML)
+#define AE_AML_NO_OPERAND               (acpi_status) (0x0002 | AE_CODE_AML)
+#define AE_AML_OPERAND_TYPE             (acpi_status) (0x0003 | AE_CODE_AML)
+#define AE_AML_OPERAND_VALUE            (acpi_status) (0x0004 | AE_CODE_AML)
+#define AE_AML_UNINITIALIZED_LOCAL      (acpi_status) (0x0005 | AE_CODE_AML)
+#define AE_AML_UNINITIALIZED_ARG        (acpi_status) (0x0006 | AE_CODE_AML)
+#define AE_AML_UNINITIALIZED_ELEMENT    (acpi_status) (0x0007 | AE_CODE_AML)
+#define AE_AML_NUMERIC_OVERFLOW         (acpi_status) (0x0008 | AE_CODE_AML)
+#define AE_AML_REGION_LIMIT             (acpi_status) (0x0009 | AE_CODE_AML)
+#define AE_AML_BUFFER_LIMIT             (acpi_status) (0x000A | AE_CODE_AML)
+#define AE_AML_PACKAGE_LIMIT            (acpi_status) (0x000B | AE_CODE_AML)
+#define AE_AML_DIVIDE_BY_ZERO           (acpi_status) (0x000C | AE_CODE_AML)
+#define AE_AML_BAD_NAME                 (acpi_status) (0x000D | AE_CODE_AML)
+#define AE_AML_NAME_NOT_FOUND           (acpi_status) (0x000E | AE_CODE_AML)
+#define AE_AML_INTERNAL                 (acpi_status) (0x000F | AE_CODE_AML)
+#define AE_AML_INVALID_SPACE_ID         (acpi_status) (0x0010 | AE_CODE_AML)
+#define AE_AML_STRING_LIMIT             (acpi_status) (0x0011 | AE_CODE_AML)
+#define AE_AML_NO_RETURN_VALUE          (acpi_status) (0x0012 | AE_CODE_AML)
+#define AE_AML_METHOD_LIMIT             (acpi_status) (0x0013 | AE_CODE_AML)
+#define AE_AML_NOT_OWNER                (acpi_status) (0x0014 | AE_CODE_AML)
+#define AE_AML_MUTEX_ORDER              (acpi_status) (0x0015 | AE_CODE_AML)
+#define AE_AML_MUTEX_NOT_ACQUIRED       (acpi_status) (0x0016 | AE_CODE_AML)
+#define AE_AML_INVALID_RESOURCE_TYPE    (acpi_status) (0x0017 | AE_CODE_AML)
+#define AE_AML_INVALID_INDEX            (acpi_status) (0x0018 | AE_CODE_AML)
+#define AE_AML_REGISTER_LIMIT           (acpi_status) (0x0019 | AE_CODE_AML)
+#define AE_AML_NO_WHILE                 (acpi_status) (0x001A | AE_CODE_AML)
+#define AE_AML_ALIGNMENT                (acpi_status) (0x001B | AE_CODE_AML)
+#define AE_AML_NO_RESOURCE_END_TAG      (acpi_status) (0x001C | AE_CODE_AML)
+#define AE_AML_BAD_RESOURCE_VALUE       (acpi_status) (0x001D | AE_CODE_AML)
+#define AE_AML_CIRCULAR_REFERENCE       (acpi_status) (0x001E | AE_CODE_AML)
+#define AE_AML_BAD_RESOURCE_LENGTH      (acpi_status) (0x001F | AE_CODE_AML)
+#define AE_AML_ILLEGAL_ADDRESS          (acpi_status) (0x0020 | AE_CODE_AML)
 
-#define AE_CODE_AML_MAX                 0x0022
+#define AE_CODE_AML_MAX                 0x0020
 
 /*
  * Internal exceptions used for control
@@ -206,19 +197,15 @@
 	"AE_STACK_OVERFLOW",
 	"AE_STACK_UNDERFLOW",
 	"AE_NOT_IMPLEMENTED",
-	"AE_VERSION_MISMATCH",
 	"AE_SUPPORT",
-	"AE_SHARE",
 	"AE_LIMIT",
 	"AE_TIME",
-	"AE_UNKNOWN_STATUS",
 	"AE_ACQUIRE_DEADLOCK",
 	"AE_RELEASE_DEADLOCK",
 	"AE_NOT_ACQUIRED",
 	"AE_ALREADY_ACQUIRED",
 	"AE_NO_HARDWARE_RESPONSE",
 	"AE_NO_GLOBAL_LOCK",
-	"AE_LOGICAL_ADDRESS",
 	"AE_ABORT_METHOD",
 	"AE_SAME_HANDLER",
 	"AE_WAKE_ONLY_GPE",
@@ -231,8 +218,6 @@
 	"AE_BAD_CHARACTER",
 	"AE_BAD_PATHNAME",
 	"AE_BAD_DATA",
-	"AE_BAD_ADDRESS",
-	"AE_ALIGNMENT",
 	"AE_BAD_HEX_CONSTANT",
 	"AE_BAD_OCTAL_CONSTANT",
 	"AE_BAD_DECIMAL_CONSTANT",
@@ -245,14 +230,11 @@
 	"AE_BAD_HEADER",
 	"AE_BAD_CHECKSUM",
 	"AE_BAD_VALUE",
-	"AE_TABLE_NOT_SUPPORTED",
 	"AE_INVALID_TABLE_LENGTH"
 };
 
 char const *acpi_gbl_exception_names_aml[] = {
 	NULL,
-	"AE_AML_ERROR",
-	"AE_AML_PARSE",
 	"AE_AML_BAD_OPCODE",
 	"AE_AML_NO_OPERAND",
 	"AE_AML_OPERAND_TYPE",
@@ -284,7 +266,7 @@
 	"AE_AML_BAD_RESOURCE_VALUE",
 	"AE_AML_CIRCULAR_REFERENCE",
 	"AE_AML_BAD_RESOURCE_LENGTH",
-	"AE_AML_ILLEGAL_ADDRESS"
+	"AE_AML_ILLEGAL_ADDRESS",
 };
 
 char const *acpi_gbl_exception_names_ctrl[] = {
diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h
index b221c85..ecab527 100644
--- a/include/acpi/aclocal.h
+++ b/include/acpi/aclocal.h
@@ -208,6 +208,7 @@
 #define ANOBJ_METHOD_ARG                0x04	/* Node is a method argument */
 #define ANOBJ_METHOD_LOCAL              0x08	/* Node is a method local */
 #define ANOBJ_SUBTREE_HAS_INI           0x10	/* Used to optimize device initialization */
+#define ANOBJ_EVALUATED                 0x20	/* Set on first evaluation of node */
 
 #define ANOBJ_IS_EXTERNAL               0x08	/* i_aSL only: This object created via External() */
 #define ANOBJ_METHOD_NO_RETVAL          0x10	/* i_aSL only: Method has no return value */
@@ -340,6 +341,82 @@
 #define ACPI_BTYPE_OBJECTS_AND_REFS     0x0001FFFF	/* ARG or LOCAL */
 #define ACPI_BTYPE_ALL_OBJECTS          0x0000FFFF
 
+/*
+ * Information structure for ACPI predefined names.
+ * Each entry in the table contains the following items:
+ *
+ * Name                 - The ACPI reserved name
+ * param_count          - Number of arguments to the method
+ * expected_return_btypes - Allowed type(s) for the return value
+ */
+struct acpi_name_info {
+	char name[ACPI_NAME_SIZE];
+	u8 param_count;
+	u8 expected_btypes;
+};
+
+/*
+ * Secondary information structures for ACPI predefined objects that return
+ * package objects. This structure appears as the next entry in the table
+ * after the NAME_INFO structure above.
+ *
+ * The reason for this is to minimize the size of the predefined name table.
+ */
+
+/*
+ * Used for ACPI_PTYPE1_FIXED, ACPI_PTYPE1_VAR, ACPI_PTYPE2,
+ * ACPI_PTYPE2_MIN, ACPI_PTYPE2_PKG_COUNT, ACPI_PTYPE2_COUNT
+ */
+struct acpi_package_info {
+	u8 type;
+	u8 object_type1;
+	u8 count1;
+	u8 object_type2;
+	u8 count2;
+	u8 reserved;
+};
+
+/* Used for ACPI_PTYPE2_FIXED */
+
+struct acpi_package_info2 {
+	u8 type;
+	u8 count;
+	u8 object_type[4];
+};
+
+/* Used for ACPI_PTYPE1_OPTION */
+
+struct acpi_package_info3 {
+	u8 type;
+	u8 count;
+	u8 object_type[2];
+	u8 tail_object_type;
+	u8 reserved;
+};
+
+union acpi_predefined_info {
+	struct acpi_name_info info;
+	struct acpi_package_info ret_info;
+	struct acpi_package_info2 ret_info2;
+	struct acpi_package_info3 ret_info3;
+};
+
+/*
+ * Bitmapped return value types
+ * Note: the actual data types must be contiguous, a loop in nspredef.c
+ * depends on this.
+ */
+#define ACPI_RTYPE_ANY                  0x00
+#define ACPI_RTYPE_NONE                 0x01
+#define ACPI_RTYPE_INTEGER              0x02
+#define ACPI_RTYPE_STRING               0x04
+#define ACPI_RTYPE_BUFFER               0x08
+#define ACPI_RTYPE_PACKAGE              0x10
+#define ACPI_RTYPE_REFERENCE            0x20
+#define ACPI_RTYPE_ALL                  0x3F
+
+#define ACPI_NUM_RTYPES                 5	/* Number of actual object types */
+
 /*****************************************************************************
  *
  * Event typedefs and structs
diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h
index 74a9617..a597207 100644
--- a/include/acpi/acmacros.h
+++ b/include/acpi/acmacros.h
@@ -62,7 +62,7 @@
 #define ACPI_ARRAY_LENGTH(x)            (sizeof(x) / sizeof((x)[0]))
 
 /*
- * Extract data using a pointer.  Any more than a byte and we
+ * Extract data using a pointer. Any more than a byte and we
  * get into potential aligment issues -- see the STORE macros below.
  * Use with care.
  */
@@ -80,21 +80,21 @@
  */
 #define ACPI_CAST_PTR(t, p)             ((t *) (acpi_uintptr_t) (p))
 #define ACPI_CAST_INDIRECT_PTR(t, p)    ((t **) (acpi_uintptr_t) (p))
-#define ACPI_ADD_PTR(t, a, b)		ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8,(a)) + (acpi_size)(b)))
-#define ACPI_PTR_DIFF(a, b)		(acpi_size) (ACPI_CAST_PTR (u8,(a)) - ACPI_CAST_PTR (u8,(b)))
+#define ACPI_ADD_PTR(t, a, b)		ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b)))
+#define ACPI_PTR_DIFF(a, b)		(acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b)))
 
 /* Pointer/Integer type conversions */
 
 #define ACPI_TO_POINTER(i)		ACPI_ADD_PTR (void, (void *) NULL, (acpi_size) i)
-#define ACPI_TO_INTEGER(p)              ACPI_PTR_DIFF (p,(void *) NULL)
-#define ACPI_OFFSET(d,f)                (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL)
+#define ACPI_TO_INTEGER(p)              ACPI_PTR_DIFF (p, (void *) NULL)
+#define ACPI_OFFSET(d, f)               (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f), (void *) NULL)
 #define ACPI_PHYSADDR_TO_PTR(i)         ACPI_TO_POINTER(i)
 #define ACPI_PTR_TO_PHYSADDR(i)         ACPI_TO_INTEGER(i)
 
 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
-#define ACPI_COMPARE_NAME(a,b)          (*ACPI_CAST_PTR (u32,(a)) == *ACPI_CAST_PTR (u32,(b)))
+#define ACPI_COMPARE_NAME(a, b)         (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b)))
 #else
-#define ACPI_COMPARE_NAME(a,b)          (!ACPI_STRNCMP (ACPI_CAST_PTR (char,(a)), ACPI_CAST_PTR (char,(b)), ACPI_NAME_SIZE))
+#define ACPI_COMPARE_NAME(a, b)         (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE))
 #endif
 
 /*
@@ -114,7 +114,7 @@
 
 /* Split 64-bit integer into two 32-bit values. Use with %8.8_x%8.8_x */
 
-#define ACPI_FORMAT_UINT64(i)           ACPI_HIDWORD(i),ACPI_LODWORD(i)
+#define ACPI_FORMAT_UINT64(i)           ACPI_HIDWORD(i), ACPI_LODWORD(i)
 
 #if ACPI_MACHINE_WIDTH == 64
 #define ACPI_FORMAT_NATIVE_UINT(i)      ACPI_FORMAT_UINT64(i)
@@ -132,37 +132,33 @@
  * Macros for big-endian machines
  */
 
-/* This macro sets a buffer index, starting from the end of the buffer */
-
-#define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) ((buf_len) - (((buf_offset)+1) * (byte_gran)))
-
 /* These macros reverse the bytes during the move, converting little-endian to big endian */
 
 			  /* Big Endian      <==        Little Endian */
 			  /*  Hi...Lo                     Lo...Hi     */
 /* 16-bit source, 16/32/64 destination */
 
-#define ACPI_MOVE_16_TO_16(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\
+#define ACPI_MOVE_16_TO_16(d, s)        {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\
 					   ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];}
 
-#define ACPI_MOVE_16_TO_32(d,s)         {(*(u32 *)(void *)(d))=0;\
+#define ACPI_MOVE_16_TO_32(d, s)        {(*(u32 *)(void *)(d))=0;\
 							   ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
 							   ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
 
-#define ACPI_MOVE_16_TO_64(d,s)         {(*(u64 *)(void *)(d))=0;\
+#define ACPI_MOVE_16_TO_64(d, s)        {(*(u64 *)(void *)(d))=0;\
 									 ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
 									 ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
 
 /* 32-bit source, 16/32/64 destination */
 
-#define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)	/* Truncate to 16 */
+#define ACPI_MOVE_32_TO_16(d, s)        ACPI_MOVE_16_TO_16(d, s)	/* Truncate to 16 */
 
-#define ACPI_MOVE_32_TO_32(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\
+#define ACPI_MOVE_32_TO_32(d, s)        {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\
 										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\
 										 ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
 										 ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
 
-#define ACPI_MOVE_32_TO_64(d,s)         {(*(u64 *)(void *)(d))=0;\
+#define ACPI_MOVE_32_TO_64(d, s)        {(*(u64 *)(void *)(d))=0;\
 										   ((u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
 										   ((u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
 										   ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
@@ -170,11 +166,11 @@
 
 /* 64-bit source, 16/32/64 destination */
 
-#define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)	/* Truncate to 16 */
+#define ACPI_MOVE_64_TO_16(d, s)        ACPI_MOVE_16_TO_16(d, s)	/* Truncate to 16 */
 
-#define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s)	/* Truncate to 32 */
+#define ACPI_MOVE_64_TO_32(d, s)        ACPI_MOVE_32_TO_32(d, s)	/* Truncate to 32 */
 
-#define ACPI_MOVE_64_TO_64(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[7];\
+#define ACPI_MOVE_64_TO_64(d, s)        {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[7];\
 										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[6];\
 										 ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[5];\
 										 ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[4];\
@@ -187,63 +183,59 @@
  * Macros for little-endian machines
  */
 
-/* This macro sets a buffer index, starting from the beginning of the buffer */
-
-#define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) (buf_offset)
-
 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
 
 /* The hardware supports unaligned transfers, just do the little-endian move */
 
 /* 16-bit source, 16/32/64 destination */
 
-#define ACPI_MOVE_16_TO_16(d,s)         *(u16 *)(void *)(d) = *(u16 *)(void *)(s)
-#define ACPI_MOVE_16_TO_32(d,s)         *(u32 *)(void *)(d) = *(u16 *)(void *)(s)
-#define ACPI_MOVE_16_TO_64(d,s)         *(u64 *)(void *)(d) = *(u16 *)(void *)(s)
+#define ACPI_MOVE_16_TO_16(d, s)        *(u16 *)(void *)(d) = *(u16 *)(void *)(s)
+#define ACPI_MOVE_16_TO_32(d, s)        *(u32 *)(void *)(d) = *(u16 *)(void *)(s)
+#define ACPI_MOVE_16_TO_64(d, s)        *(u64 *)(void *)(d) = *(u16 *)(void *)(s)
 
 /* 32-bit source, 16/32/64 destination */
 
-#define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)	/* Truncate to 16 */
-#define ACPI_MOVE_32_TO_32(d,s)         *(u32 *)(void *)(d) = *(u32 *)(void *)(s)
-#define ACPI_MOVE_32_TO_64(d,s)         *(u64 *)(void *)(d) = *(u32 *)(void *)(s)
+#define ACPI_MOVE_32_TO_16(d, s)        ACPI_MOVE_16_TO_16(d, s)	/* Truncate to 16 */
+#define ACPI_MOVE_32_TO_32(d, s)        *(u32 *)(void *)(d) = *(u32 *)(void *)(s)
+#define ACPI_MOVE_32_TO_64(d, s)        *(u64 *)(void *)(d) = *(u32 *)(void *)(s)
 
 /* 64-bit source, 16/32/64 destination */
 
-#define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)	/* Truncate to 16 */
-#define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s)	/* Truncate to 32 */
-#define ACPI_MOVE_64_TO_64(d,s)         *(u64 *)(void *)(d) = *(u64 *)(void *)(s)
+#define ACPI_MOVE_64_TO_16(d, s)        ACPI_MOVE_16_TO_16(d, s)	/* Truncate to 16 */
+#define ACPI_MOVE_64_TO_32(d, s)        ACPI_MOVE_32_TO_32(d, s)	/* Truncate to 32 */
+#define ACPI_MOVE_64_TO_64(d, s)        *(u64 *)(void *)(d) = *(u64 *)(void *)(s)
 
 #else
 /*
- * The hardware does not support unaligned transfers.  We must move the
- * data one byte at a time.  These macros work whether the source or
+ * The hardware does not support unaligned transfers. We must move the
+ * data one byte at a time. These macros work whether the source or
  * the destination (or both) is/are unaligned.  (Little-endian move)
  */
 
 /* 16-bit source, 16/32/64 destination */
 
-#define ACPI_MOVE_16_TO_16(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
+#define ACPI_MOVE_16_TO_16(d, s)        {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
 										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];}
 
-#define ACPI_MOVE_16_TO_32(d,s)         {(*(u32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);}
-#define ACPI_MOVE_16_TO_64(d,s)         {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);}
+#define ACPI_MOVE_16_TO_32(d, s)        {(*(u32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d, s);}
+#define ACPI_MOVE_16_TO_64(d, s)        {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d, s);}
 
 /* 32-bit source, 16/32/64 destination */
 
-#define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)	/* Truncate to 16 */
+#define ACPI_MOVE_32_TO_16(d, s)        ACPI_MOVE_16_TO_16(d, s)	/* Truncate to 16 */
 
-#define ACPI_MOVE_32_TO_32(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
+#define ACPI_MOVE_32_TO_32(d, s)        {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
 										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
 										 ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
 										 ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];}
 
-#define ACPI_MOVE_32_TO_64(d,s)         {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d,s);}
+#define ACPI_MOVE_32_TO_64(d, s)        {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d, s);}
 
 /* 64-bit source, 16/32/64 destination */
 
-#define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s)	/* Truncate to 16 */
-#define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s)	/* Truncate to 32 */
-#define ACPI_MOVE_64_TO_64(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
+#define ACPI_MOVE_64_TO_16(d, s)        ACPI_MOVE_16_TO_16(d, s)	/* Truncate to 16 */
+#define ACPI_MOVE_64_TO_32(d, s)        ACPI_MOVE_32_TO_32(d, s)	/* Truncate to 32 */
+#define ACPI_MOVE_64_TO_64(d, s)        {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
 										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
 										 ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
 										 ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];\
@@ -257,10 +249,10 @@
 /* Macros based on machine integer width */
 
 #if ACPI_MACHINE_WIDTH == 32
-#define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_32_TO_16(d,s)
+#define ACPI_MOVE_SIZE_TO_16(d, s)       ACPI_MOVE_32_TO_16(d, s)
 
 #elif ACPI_MACHINE_WIDTH == 64
-#define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_64_TO_16(d,s)
+#define ACPI_MOVE_SIZE_TO_16(d, s)       ACPI_MOVE_64_TO_16(d, s)
 
 #else
 #error unknown ACPI_MACHINE_WIDTH
@@ -269,29 +261,29 @@
 /*
  * Fast power-of-two math macros for non-optimized compilers
  */
-#define _ACPI_DIV(value,power_of2)      ((u32) ((value) >> (power_of2)))
-#define _ACPI_MUL(value,power_of2)      ((u32) ((value) << (power_of2)))
-#define _ACPI_MOD(value,divisor)        ((u32) ((value) & ((divisor) -1)))
+#define _ACPI_DIV(value, power_of2)      ((u32) ((value) >> (power_of2)))
+#define _ACPI_MUL(value, power_of2)      ((u32) ((value) << (power_of2)))
+#define _ACPI_MOD(value, divisor)        ((u32) ((value) & ((divisor) -1)))
 
-#define ACPI_DIV_2(a)                   _ACPI_DIV(a,1)
-#define ACPI_MUL_2(a)                   _ACPI_MUL(a,1)
-#define ACPI_MOD_2(a)                   _ACPI_MOD(a,2)
+#define ACPI_DIV_2(a)                   _ACPI_DIV(a, 1)
+#define ACPI_MUL_2(a)                   _ACPI_MUL(a, 1)
+#define ACPI_MOD_2(a)                   _ACPI_MOD(a, 2)
 
-#define ACPI_DIV_4(a)                   _ACPI_DIV(a,2)
-#define ACPI_MUL_4(a)                   _ACPI_MUL(a,2)
-#define ACPI_MOD_4(a)                   _ACPI_MOD(a,4)
+#define ACPI_DIV_4(a)                   _ACPI_DIV(a, 2)
+#define ACPI_MUL_4(a)                   _ACPI_MUL(a, 2)
+#define ACPI_MOD_4(a)                   _ACPI_MOD(a, 4)
 
-#define ACPI_DIV_8(a)                   _ACPI_DIV(a,3)
-#define ACPI_MUL_8(a)                   _ACPI_MUL(a,3)
-#define ACPI_MOD_8(a)                   _ACPI_MOD(a,8)
+#define ACPI_DIV_8(a)                   _ACPI_DIV(a, 3)
+#define ACPI_MUL_8(a)                   _ACPI_MUL(a, 3)
+#define ACPI_MOD_8(a)                   _ACPI_MOD(a, 8)
 
-#define ACPI_DIV_16(a)                  _ACPI_DIV(a,4)
-#define ACPI_MUL_16(a)                  _ACPI_MUL(a,4)
-#define ACPI_MOD_16(a)                  _ACPI_MOD(a,16)
+#define ACPI_DIV_16(a)                  _ACPI_DIV(a, 4)
+#define ACPI_MUL_16(a)                  _ACPI_MUL(a, 4)
+#define ACPI_MOD_16(a)                  _ACPI_MOD(a, 16)
 
-#define ACPI_DIV_32(a)                  _ACPI_DIV(a,5)
-#define ACPI_MUL_32(a)                  _ACPI_MUL(a,5)
-#define ACPI_MOD_32(a)                  _ACPI_MOD(a,32)
+#define ACPI_DIV_32(a)                  _ACPI_DIV(a, 5)
+#define ACPI_MUL_32(a)                  _ACPI_MUL(a, 5)
+#define ACPI_MOD_32(a)                  _ACPI_MOD(a, 32)
 
 /*
  * Rounding macros (Power of two boundaries only)
@@ -305,13 +297,13 @@
 
 /* Note: sizeof(acpi_size) evaluates to either 4 or 8 (32- vs 64-bit mode) */
 
-#define ACPI_ROUND_DOWN_TO_32BIT(a)         ACPI_ROUND_DOWN(a,4)
-#define ACPI_ROUND_DOWN_TO_64BIT(a)         ACPI_ROUND_DOWN(a,8)
-#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a)   ACPI_ROUND_DOWN(a,sizeof(acpi_size))
+#define ACPI_ROUND_DOWN_TO_32BIT(a)         ACPI_ROUND_DOWN(a, 4)
+#define ACPI_ROUND_DOWN_TO_64BIT(a)         ACPI_ROUND_DOWN(a, 8)
+#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a)   ACPI_ROUND_DOWN(a, sizeof(acpi_size))
 
-#define ACPI_ROUND_UP_TO_32BIT(a)           ACPI_ROUND_UP(a,4)
-#define ACPI_ROUND_UP_TO_64BIT(a)           ACPI_ROUND_UP(a,8)
-#define ACPI_ROUND_UP_TO_NATIVE_WORD(a)     ACPI_ROUND_UP(a,sizeof(acpi_size))
+#define ACPI_ROUND_UP_TO_32BIT(a)           ACPI_ROUND_UP(a, 4)
+#define ACPI_ROUND_UP_TO_64BIT(a)           ACPI_ROUND_UP(a, 8)
+#define ACPI_ROUND_UP_TO_NATIVE_WORD(a)     ACPI_ROUND_UP(a, sizeof(acpi_size))
 
 #define ACPI_ROUND_BITS_UP_TO_BYTES(a)      ACPI_DIV_8((a) + 7)
 #define ACPI_ROUND_BITS_DOWN_TO_BYTES(a)    ACPI_DIV_8((a))
@@ -320,9 +312,9 @@
 
 /* Generic (non-power-of-two) rounding */
 
-#define ACPI_ROUND_UP_TO(value,boundary)    (((value) + ((boundary)-1)) / (boundary))
+#define ACPI_ROUND_UP_TO(value, boundary)   (((value) + ((boundary)-1)) / (boundary))
 
-#define ACPI_IS_MISALIGNED(value)	    (((acpi_size)value) & (sizeof(acpi_size)-1))
+#define ACPI_IS_MISALIGNED(value)	    (((acpi_size) value) & (sizeof(acpi_size)-1))
 
 /*
  * Bitmask creation
@@ -333,8 +325,6 @@
 #define ACPI_MASK_BITS_ABOVE(position)      (~((ACPI_INTEGER_MAX) << ((u32) (position))))
 #define ACPI_MASK_BITS_BELOW(position)      ((ACPI_INTEGER_MAX) << ((u32) (position)))
 
-#define ACPI_IS_OCTAL_DIGIT(d)              (((char)(d) >= '0') && ((char)(d) <= '7'))
-
 /* Bitfields within ACPI registers */
 
 #define ACPI_REGISTER_PREPARE_BITS(val, pos, mask)      ((val << pos) & mask)
@@ -342,39 +332,29 @@
 
 #define ACPI_INSERT_BITS(target, mask, source)          target = ((target & (~(mask))) | (source & mask))
 
-/* Generate a UUID */
-
-#define ACPI_INIT_UUID(a,b,c,d0,d1,d2,d3,d4,d5,d6,d7) \
-	(a) & 0xFF, ((a) >> 8) & 0xFF, ((a) >> 16) & 0xFF, ((a) >> 24) & 0xFF, \
-	(b) & 0xFF, ((b) >> 8) & 0xFF, \
-	(c) & 0xFF, ((c) >> 8) & 0xFF, \
-	(d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7)
-
 /*
- * An struct acpi_namespace_node * can appear in some contexts,
- * where a pointer to an union acpi_operand_object    can also
- * appear.  This macro is used to distinguish them.
+ * An struct acpi_namespace_node can appear in some contexts
+ * where a pointer to an union acpi_operand_object can also
+ * appear. This macro is used to distinguish them.
  *
  * The "Descriptor" field is the first field in both structures.
  */
 #define ACPI_GET_DESCRIPTOR_TYPE(d)     (((union acpi_descriptor *)(void *)(d))->common.descriptor_type)
-#define ACPI_SET_DESCRIPTOR_TYPE(d,t)   (((union acpi_descriptor *)(void *)(d))->common.descriptor_type = t)
+#define ACPI_SET_DESCRIPTOR_TYPE(d, t)  (((union acpi_descriptor *)(void *)(d))->common.descriptor_type = t)
 
 /* Macro to test the object type */
 
 #define ACPI_GET_OBJECT_TYPE(d)         (((union acpi_operand_object *)(void *)(d))->common.type)
 
-/* Macro to check the table flags for SINGLE or MULTIPLE tables are allowed */
-
-#define ACPI_IS_SINGLE_TABLE(x)         (((x) & 0x01) == ACPI_TABLE_SINGLE ? 1 : 0)
-
 /*
  * Macros for the master AML opcode table
  */
-#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT)
-#define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags)    {name,(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type}
+#if defined (ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT)
+#define ACPI_OP(name, Pargs, Iargs, obj_type, class, type, flags) \
+	{name, (u32)(Pargs), (u32)(Iargs), (u32)(flags), obj_type, class, type}
 #else
-#define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags)    {(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type}
+#define ACPI_OP(name, Pargs, Iargs, obj_type, class, type, flags) \
+	{(u32)(Pargs), (u32)(Iargs), (u32)(flags), obj_type, class, type}
 #endif
 
 #ifdef ACPI_DISASSEMBLER
@@ -392,18 +372,18 @@
 #define ARG_6(x)                        ((u32)(x) << (5 * ARG_TYPE_WIDTH))
 
 #define ARGI_LIST1(a)                   (ARG_1(a))
-#define ARGI_LIST2(a,b)                 (ARG_1(b)|ARG_2(a))
-#define ARGI_LIST3(a,b,c)               (ARG_1(c)|ARG_2(b)|ARG_3(a))
-#define ARGI_LIST4(a,b,c,d)             (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a))
-#define ARGI_LIST5(a,b,c,d,e)           (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a))
-#define ARGI_LIST6(a,b,c,d,e,f)         (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a))
+#define ARGI_LIST2(a, b)                (ARG_1(b)|ARG_2(a))
+#define ARGI_LIST3(a, b, c)             (ARG_1(c)|ARG_2(b)|ARG_3(a))
+#define ARGI_LIST4(a, b, c, d)          (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a))
+#define ARGI_LIST5(a, b, c, d, e)       (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a))
+#define ARGI_LIST6(a, b, c, d, e, f)    (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a))
 
 #define ARGP_LIST1(a)                   (ARG_1(a))
-#define ARGP_LIST2(a,b)                 (ARG_1(a)|ARG_2(b))
-#define ARGP_LIST3(a,b,c)               (ARG_1(a)|ARG_2(b)|ARG_3(c))
-#define ARGP_LIST4(a,b,c,d)             (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d))
-#define ARGP_LIST5(a,b,c,d,e)           (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e))
-#define ARGP_LIST6(a,b,c,d,e,f)         (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f))
+#define ARGP_LIST2(a, b)                (ARG_1(a)|ARG_2(b))
+#define ARGP_LIST3(a, b, c)             (ARG_1(a)|ARG_2(b)|ARG_3(c))
+#define ARGP_LIST4(a, b, c, d)          (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d))
+#define ARGP_LIST5(a, b, c, d, e)       (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e))
+#define ARGP_LIST6(a, b, c, d, e, f)    (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f))
 
 #define GET_CURRENT_ARG_TYPE(list)      (list & ((u32) 0x1F))
 #define INCREMENT_ARG_LIST(list)        (list >>= ((u32) ARG_TYPE_WIDTH))
@@ -434,8 +414,8 @@
 #define ACPI_WARNING(plist)             acpi_ut_warning plist
 #define ACPI_EXCEPTION(plist)           acpi_ut_exception plist
 #define ACPI_ERROR(plist)               acpi_ut_error plist
-#define ACPI_ERROR_NAMESPACE(s,e)       acpi_ns_report_error (AE_INFO, s, e);
-#define ACPI_ERROR_METHOD(s,n,p,e)      acpi_ns_report_method_error (AE_INFO, s, n, p, e);
+#define ACPI_ERROR_NAMESPACE(s, e)      acpi_ns_report_error (AE_INFO, s, e);
+#define ACPI_ERROR_METHOD(s, n, p, e)   acpi_ns_report_method_error (AE_INFO, s, n, p, e);
 
 #else
 
@@ -445,8 +425,8 @@
 #define ACPI_WARNING(plist)
 #define ACPI_EXCEPTION(plist)
 #define ACPI_ERROR(plist)
-#define ACPI_ERROR_NAMESPACE(s,e)
-#define ACPI_ERROR_METHOD(s,n,p,e)
+#define ACPI_ERROR_NAMESPACE(s, e)
+#define ACPI_ERROR_METHOD(s, n, p, e)
 #endif
 
 /*
@@ -489,18 +469,18 @@
 
 #define ACPI_FUNCTION_TRACE(a)          ACPI_FUNCTION_NAME(a) \
 			  acpi_ut_trace(ACPI_DEBUG_PARAMETERS)
-#define ACPI_FUNCTION_TRACE_PTR(a,b)    ACPI_FUNCTION_NAME(a) \
-					   acpi_ut_trace_ptr(ACPI_DEBUG_PARAMETERS,(void *)b)
-#define ACPI_FUNCTION_TRACE_U32(a,b)    ACPI_FUNCTION_NAME(a) \
-							 acpi_ut_trace_u32(ACPI_DEBUG_PARAMETERS,(u32)b)
-#define ACPI_FUNCTION_TRACE_STR(a,b)    ACPI_FUNCTION_NAME(a) \
-									  acpi_ut_trace_str(ACPI_DEBUG_PARAMETERS,(char *)b)
+#define ACPI_FUNCTION_TRACE_PTR(a, b)   ACPI_FUNCTION_NAME(a) \
+					   acpi_ut_trace_ptr(ACPI_DEBUG_PARAMETERS, (void *)b)
+#define ACPI_FUNCTION_TRACE_U32(a, b)   ACPI_FUNCTION_NAME(a) \
+							 acpi_ut_trace_u32(ACPI_DEBUG_PARAMETERS, (u32)b)
+#define ACPI_FUNCTION_TRACE_STR(a, b)   ACPI_FUNCTION_NAME(a) \
+									  acpi_ut_trace_str(ACPI_DEBUG_PARAMETERS, (char *)b)
 
 #define ACPI_FUNCTION_ENTRY()           acpi_ut_track_stack_ptr()
 
 /*
  * Function exit tracing.
- * WARNING: These macros include a return statement.  This is usually considered
+ * WARNING: These macros include a return statement. This is usually considered
  * bad form, but having a separate exit macro is very ugly and difficult to maintain.
  * One of the FUNCTION_TRACE macros above must be used in conjunction with these macros
  * so that "_AcpiFunctionName" is defined.
@@ -596,13 +576,13 @@
 
 /* Stack and buffer dumping */
 
-#define ACPI_DUMP_STACK_ENTRY(a)        acpi_ex_dump_operand((a),0)
-#define ACPI_DUMP_OPERANDS(a,b,c)	acpi_ex_dump_operands(a,b,c)
+#define ACPI_DUMP_STACK_ENTRY(a)        acpi_ex_dump_operand((a), 0)
+#define ACPI_DUMP_OPERANDS(a, b, c)	acpi_ex_dump_operands(a, b, c)
 
-#define ACPI_DUMP_ENTRY(a,b)            acpi_ns_dump_entry (a,b)
-#define ACPI_DUMP_PATHNAME(a,b,c,d)     acpi_ns_dump_pathname(a,b,c,d)
+#define ACPI_DUMP_ENTRY(a, b)           acpi_ns_dump_entry (a, b)
+#define ACPI_DUMP_PATHNAME(a, b, c, d)  acpi_ns_dump_pathname(a, b, c, d)
 #define ACPI_DUMP_RESOURCE_LIST(a)      acpi_rs_dump_resource_list(a)
-#define ACPI_DUMP_BUFFER(a,b)           acpi_ut_dump_buffer((u8 *)a,b,DB_BYTE_DISPLAY,_COMPONENT)
+#define ACPI_DUMP_BUFFER(a, b)          acpi_ut_dump_buffer((u8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT)
 
 /*
  * Master debug print macros
@@ -625,20 +605,20 @@
 #define ACPI_DEBUG_ONLY_MEMBERS(a)	do { } while(0)
 #define ACPI_FUNCTION_NAME(a)		do { } while(0)
 #define ACPI_FUNCTION_TRACE(a)		do { } while(0)
-#define ACPI_FUNCTION_TRACE_PTR(a,b)	do { } while(0)
-#define ACPI_FUNCTION_TRACE_U32(a,b)	do { } while(0)
-#define ACPI_FUNCTION_TRACE_STR(a,b)	do { } while(0)
+#define ACPI_FUNCTION_TRACE_PTR(a, b)	do { } while(0)
+#define ACPI_FUNCTION_TRACE_U32(a, b)	do { } while(0)
+#define ACPI_FUNCTION_TRACE_STR(a, b)	do { } while(0)
 #define ACPI_FUNCTION_EXIT		do { } while(0)
 #define ACPI_FUNCTION_STATUS_EXIT(s)	do { } while(0)
 #define ACPI_FUNCTION_VALUE_EXIT(s)	do { } while(0)
 #define ACPI_FUNCTION_ENTRY()		do { } while(0)
 #define ACPI_DUMP_STACK_ENTRY(a)	do { } while(0)
-#define ACPI_DUMP_OPERANDS(a,b,c)      do { } while(0)
-#define ACPI_DUMP_ENTRY(a,b)		do { } while(0)
-#define ACPI_DUMP_TABLES(a,b)		do { } while(0)
-#define ACPI_DUMP_PATHNAME(a,b,c,d)	do { } while(0)
+#define ACPI_DUMP_OPERANDS(a, b, c)     do { } while(0)
+#define ACPI_DUMP_ENTRY(a, b)		do { } while(0)
+#define ACPI_DUMP_TABLES(a, b)		do { } while(0)
+#define ACPI_DUMP_PATHNAME(a, b, c, d)	do { } while(0)
 #define ACPI_DUMP_RESOURCE_LIST(a)	do { } while(0)
-#define ACPI_DUMP_BUFFER(a,b)		do { } while(0)
+#define ACPI_DUMP_BUFFER(a, b)		do { } while(0)
 #define ACPI_DEBUG_PRINT(pl)		do { } while(0)
 #define ACPI_DEBUG_PRINT_RAW(pl)	do { } while(0)
 
@@ -677,15 +657,17 @@
 /*
  * Memory allocation tracking (DEBUG ONLY)
  */
+#define ACPI_MEM_PARAMETERS         _COMPONENT, _acpi_module_name, __LINE__
+
 #ifndef ACPI_DBG_TRACK_ALLOCATIONS
 
 /* Memory allocation */
 
 #ifndef ACPI_ALLOCATE
-#define ACPI_ALLOCATE(a)            acpi_ut_allocate((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
+#define ACPI_ALLOCATE(a)            acpi_ut_allocate((acpi_size)(a), ACPI_MEM_PARAMETERS)
 #endif
 #ifndef ACPI_ALLOCATE_ZEROED
-#define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
+#define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed((acpi_size)(a), ACPI_MEM_PARAMETERS)
 #endif
 #ifndef ACPI_FREE
 #define ACPI_FREE(a)                acpio_os_free(a)
@@ -696,11 +678,16 @@
 
 /* Memory allocation */
 
-#define ACPI_ALLOCATE(a)            acpi_ut_allocate_and_track((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
-#define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed_and_track((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
-#define ACPI_FREE(a)                acpi_ut_free_and_track(a,_COMPONENT,_acpi_module_name,__LINE__)
+#define ACPI_ALLOCATE(a)            acpi_ut_allocate_and_track((acpi_size)(a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed_and_track((acpi_size)(a), ACPI_MEM_PARAMETERS)
+#define ACPI_FREE(a)                acpi_ut_free_and_track(a, ACPI_MEM_PARAMETERS)
 #define ACPI_MEM_TRACKING(a)        a
 
 #endif				/* ACPI_DBG_TRACK_ALLOCATIONS */
 
+/* Preemption point */
+#ifndef ACPI_PREEMPTION_POINT
+#define ACPI_PREEMPTION_POINT() /* no preemption */
+#endif
+
 #endif				/* ACMACROS_H */
diff --git a/include/acpi/acnamesp.h b/include/acpi/acnamesp.h
index c340085..db4e6f6 100644
--- a/include/acpi/acnamesp.h
+++ b/include/acpi/acnamesp.h
@@ -178,6 +178,22 @@
 acpi_status acpi_ns_evaluate(struct acpi_evaluate_info *info);
 
 /*
+ * nspredef - Support for predefined/reserved names
+ */
+acpi_status
+acpi_ns_check_predefined_names(struct acpi_namespace_node *node,
+			       union acpi_operand_object *return_object);
+
+const union acpi_predefined_info *acpi_ns_check_for_predefined_name(struct
+								    acpi_namespace_node
+								    *node);
+
+void
+acpi_ns_check_parameter_count(char *pathname,
+			      struct acpi_namespace_node *node,
+			      const union acpi_predefined_info *info);
+
+/*
  * nsnames - Name and Scope manipulation
  */
 u32 acpi_ns_opens_scope(acpi_object_type type);
diff --git a/include/acpi/acobject.h b/include/acpi/acobject.h
index e9657da..eb6f038b 100644
--- a/include/acpi/acobject.h
+++ b/include/acpi/acobject.h
@@ -308,18 +308,34 @@
  *****************************************************************************/
 
 /*
- * The Reference object type is used for these opcodes:
- * Arg[0-6], Local[0-7], index_op, name_op, zero_op, one_op, ones_op, debug_op
+ * The Reference object is used for these opcodes:
+ * Arg[0-6], Local[0-7], index_op, name_op, ref_of_op, load_op, load_table_op, debug_op
+ * The Reference.Class differentiates these types.
  */
 struct acpi_object_reference {
-	ACPI_OBJECT_COMMON_HEADER u8 target_type;	/* Used for index_op */
-	u16 opcode;
+	ACPI_OBJECT_COMMON_HEADER u8 class;	/* Reference Class */
+	u8 target_type;		/* Used for Index Op */
+	u8 reserved;
 	void *object;		/* name_op=>HANDLE to obj, index_op=>union acpi_operand_object */
-	struct acpi_namespace_node *node;
-	union acpi_operand_object **where;
-	u32 offset;		/* Used for arg_op, local_op, and index_op */
+	struct acpi_namespace_node *node;	/* ref_of or Namepath */
+	union acpi_operand_object **where;	/* Target of Index */
+	u32 value;		/* Used for Local/Arg/Index/ddb_handle */
 };
 
+/* Values for Reference.Class above */
+
+typedef enum {
+	ACPI_REFCLASS_LOCAL = 0,	/* Method local */
+	ACPI_REFCLASS_ARG = 1,	/* Method argument */
+	ACPI_REFCLASS_REFOF = 2,	/* Result of ref_of() TBD: Split to Ref/Node and Ref/operand_obj? */
+	ACPI_REFCLASS_INDEX = 3,	/* Result of Index() */
+	ACPI_REFCLASS_TABLE = 4,	/* ddb_handle - Load(), load_table() */
+	ACPI_REFCLASS_NAME = 5,	/* Reference to a named object */
+	ACPI_REFCLASS_DEBUG = 6,	/* Debug object */
+
+	ACPI_REFCLASS_MAX = 6
+} ACPI_REFERENCE_CLASSES;
+
 /*
  * Extra object is used as additional storage for types that
  * have AML code in their declarations (term_args) that must be
@@ -379,6 +395,13 @@
 	struct acpi_object_extra extra;
 	struct acpi_object_data data;
 	struct acpi_object_cache_list cache;
+
+	/*
+	 * Add namespace node to union in order to simplify code that accepts both
+	 * ACPI_OPERAND_OBJECTs and ACPI_NAMESPACE_NODEs. The structures share
+	 * a common descriptor_type field in order to differentiate them.
+	 */
+	struct acpi_namespace_node node;
 };
 
 /******************************************************************************
diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h
index e17873d..09d33c7 100644
--- a/include/acpi/acoutput.h
+++ b/include/acpi/acoutput.h
@@ -80,12 +80,10 @@
 /*
  * Raw debug output levels, do not use these in the DEBUG_PRINT macros
  */
-#define ACPI_LV_ERROR               0x00000001
-#define ACPI_LV_WARN                0x00000002
-#define ACPI_LV_INIT                0x00000004
-#define ACPI_LV_DEBUG_OBJECT        0x00000008
-#define ACPI_LV_INFO                0x00000010
-#define ACPI_LV_ALL_EXCEPTIONS      0x0000001F
+#define ACPI_LV_INIT                0x00000001
+#define ACPI_LV_DEBUG_OBJECT        0x00000002
+#define ACPI_LV_INFO                0x00000004
+#define ACPI_LV_ALL_EXCEPTIONS      0x00000007
 
 /* Trace verbosity level 1 [Standard Trace Level] */
 
@@ -127,7 +125,6 @@
 #define ACPI_LV_VERBOSE_INFO        0x20000000
 #define ACPI_LV_FULL_TABLES         0x40000000
 #define ACPI_LV_EVENTS              0x80000000
-
 #define ACPI_LV_VERBOSE             0xF0000000
 
 /*
@@ -135,21 +132,17 @@
  */
 #define ACPI_DEBUG_LEVEL(dl)        (u32) dl,ACPI_DEBUG_PARAMETERS
 
-/* Exception level -- used in the global "DebugLevel" */
-
+/*
+ * Exception level -- used in the global "DebugLevel"
+ *
+ * Note: For errors, use the ACPI_ERROR or ACPI_EXCEPTION interfaces.
+ * For warnings, use ACPI_WARNING.
+ */
 #define ACPI_DB_INIT                ACPI_DEBUG_LEVEL (ACPI_LV_INIT)
 #define ACPI_DB_DEBUG_OBJECT        ACPI_DEBUG_LEVEL (ACPI_LV_DEBUG_OBJECT)
 #define ACPI_DB_INFO                ACPI_DEBUG_LEVEL (ACPI_LV_INFO)
 #define ACPI_DB_ALL_EXCEPTIONS      ACPI_DEBUG_LEVEL (ACPI_LV_ALL_EXCEPTIONS)
 
-/*
- * These two levels are essentially obsolete, all instances in the
- * ACPICA core code have been replaced by ACPI_ERROR and ACPI_WARNING
- * (Kept here because some drivers may still use them)
- */
-#define ACPI_DB_ERROR               ACPI_DEBUG_LEVEL (ACPI_LV_ERROR)
-#define ACPI_DB_WARN                ACPI_DEBUG_LEVEL (ACPI_LV_WARN)
-
 /* Trace level -- also used in the global "DebugLevel" */
 
 #define ACPI_DB_INIT_NAMES          ACPI_DEBUG_LEVEL (ACPI_LV_INIT_NAMES)
@@ -173,13 +166,14 @@
 #define ACPI_DB_USER_REQUESTS       ACPI_DEBUG_LEVEL (ACPI_LV_USER_REQUESTS)
 #define ACPI_DB_PACKAGE             ACPI_DEBUG_LEVEL (ACPI_LV_PACKAGE)
 #define ACPI_DB_MUTEX               ACPI_DEBUG_LEVEL (ACPI_LV_MUTEX)
+#define ACPI_DB_EVENTS              ACPI_DEBUG_LEVEL (ACPI_LV_EVENTS)
 
 #define ACPI_DB_ALL                 ACPI_DEBUG_LEVEL (ACPI_LV_ALL)
 
 /* Defaults for debug_level, debug and normal */
 
-#define ACPI_DEBUG_DEFAULT          (ACPI_LV_INIT | ACPI_LV_WARN | ACPI_LV_ERROR)
-#define ACPI_NORMAL_DEFAULT         (ACPI_LV_INIT | ACPI_LV_WARN | ACPI_LV_ERROR)
+#define ACPI_DEBUG_DEFAULT          (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT)
+#define ACPI_NORMAL_DEFAULT         (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT)
 #define ACPI_DEBUG_ALL              (ACPI_LV_AML_DISASSEMBLE | ACPI_LV_ALL_EXCEPTIONS | ACPI_LV_ALL)
 
 #endif				/* __ACOUTPUT_H__ */
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index a5ac0bc..54a279e4 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -46,7 +46,7 @@
 acpi_status
 acpi_evaluate_integer(acpi_handle handle,
 		      acpi_string pathname,
-		      struct acpi_object_list *arguments, unsigned long *data);
+		      struct acpi_object_list *arguments, unsigned long long *data);
 acpi_status
 acpi_evaluate_reference(acpi_handle handle,
 			acpi_string pathname,
@@ -300,7 +300,11 @@
 	enum acpi_bus_removal_type removal_type;	/* indicate for different removal type */
 };
 
-#define acpi_driver_data(d)	((d)->driver_data)
+static inline void *acpi_driver_data(struct acpi_device *d)
+{
+	return d->driver_data;
+}
+
 #define to_acpi_device(d)	container_of(d, struct acpi_device, dev)
 #define to_acpi_driver(d)	container_of(d, struct acpi_driver, drv)
 
@@ -327,6 +331,9 @@
 extern int acpi_notifier_call_chain(struct acpi_device *, u32, u32);
 extern int register_acpi_notifier(struct notifier_block *);
 extern int unregister_acpi_notifier(struct notifier_block *);
+
+extern int register_acpi_bus_notifier(struct notifier_block *nb);
+extern void unregister_acpi_bus_notifier(struct notifier_block *nb);
 /*
  * External Functions
  */
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index e5f38e5..cf04c60 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -93,6 +93,7 @@
 int acpi_disable_wakeup_device_power(struct acpi_device *dev);
 int acpi_power_get_inferred_state(struct acpi_device *device);
 int acpi_power_transition(struct acpi_device *device, int state);
+extern int acpi_power_nocheck;
 #endif
 
 /* --------------------------------------------------------------------------
@@ -100,6 +101,7 @@
    -------------------------------------------------------------------------- */
 #ifdef CONFIG_ACPI_EC
 int acpi_ec_ecdt_probe(void);
+int acpi_boot_ec_enable(void);
 #endif
 
 /* --------------------------------------------------------------------------
@@ -115,12 +117,17 @@
 /*--------------------------------------------------------------------------
                                   Dock Station
   -------------------------------------------------------------------------- */
+struct acpi_dock_ops {
+	acpi_notify_handler handler;
+	acpi_notify_handler uevent;
+};
+
 #if defined(CONFIG_ACPI_DOCK) || defined(CONFIG_ACPI_DOCK_MODULE)
 extern int is_dock_device(acpi_handle handle);
 extern int register_dock_notifier(struct notifier_block *nb);
 extern void unregister_dock_notifier(struct notifier_block *nb);
 extern int register_hotplug_dock_device(acpi_handle handle,
-					acpi_notify_handler handler,
+					struct acpi_dock_ops *ops,
 					void *context);
 extern void unregister_hotplug_dock_device(acpi_handle handle);
 #else
@@ -136,7 +143,7 @@
 {
 }
 static inline int register_hotplug_dock_device(acpi_handle handle,
-					       acpi_notify_handler handler,
+					       struct acpi_dock_ops *ops,
 					       void *context)
 {
 	return -ENODEV;
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index 3f93a6b..b91440a 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -193,6 +193,9 @@
 acpi_os_execute(acpi_execute_type type,
 		acpi_osd_exec_callback function, void *context);
 
+acpi_status
+acpi_os_hotplug_execute(acpi_osd_exec_callback function, void *context);
+
 void acpi_os_wait_events_complete(void *context);
 
 void acpi_os_sleep(acpi_integer milliseconds);
diff --git a/include/acpi/acpredef.h b/include/acpi/acpredef.h
new file mode 100644
index 0000000..619fb75
--- /dev/null
+++ b/include/acpi/acpredef.h
@@ -0,0 +1,371 @@
+/******************************************************************************
+ *
+ * Name: acpredef - Information table for ACPI predefined methods and objects
+ *              $Revision: 1.1 $
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2008, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACPREDEF_H__
+#define __ACPREDEF_H__
+
+/******************************************************************************
+ *
+ * Return Package types
+ *
+ * 1) PTYPE1 packages do not contain sub-packages.
+ *
+ * ACPI_PTYPE1_FIXED: Fixed length, 1 or 2 object types:
+ *     object type
+ *     count
+ *     object type
+ *     count
+ *
+ * ACPI_PTYPE1_VAR: Variable length:
+ *    object type (Int/Buf/Ref)
+ *
+ * ACPI_PTYPE1_OPTION: Package has some required and some optional elements:
+ *      Used for _PRW
+ *
+ *
+ * 2) PTYPE2 packages contain a variable number of sub-packages. Each of the
+ *    different types describe the contents of each of the sub-packages.
+ *
+ * ACPI_PTYPE2: Each subpackage contains 1 or 2 object types:
+ *     object type
+ *     count
+ *     object type
+ *     count
+ *
+ * ACPI_PTYPE2_COUNT: Each subpackage has a count as first element:
+ *     object type
+ *
+ * ACPI_PTYPE2_PKG_COUNT: Count of subpackages at start, 1 or 2 object types:
+ *     object type
+ *     count
+ *     object type
+ *     count
+ *
+ * ACPI_PTYPE2_FIXED: Each subpackage is of fixed length:
+ *      Used for _PRT
+ *
+ * ACPI_PTYPE2_MIN: Each subpackage has a variable but minimum length
+ *      Used for _HPX
+ *
+ *****************************************************************************/
+
+enum acpi_return_package_types {
+	ACPI_PTYPE1_FIXED = 1,
+	ACPI_PTYPE1_VAR = 2,
+	ACPI_PTYPE1_OPTION = 3,
+	ACPI_PTYPE2 = 4,
+	ACPI_PTYPE2_COUNT = 5,
+	ACPI_PTYPE2_PKG_COUNT = 6,
+	ACPI_PTYPE2_FIXED = 7,
+	ACPI_PTYPE2_MIN = 8
+};
+
+/*
+ * Predefined method/object information table.
+ *
+ * These are the names that can actually be evaluated via acpi_evaluate_object.
+ * Not present in this table are the following:
+ *
+ *      1) Predefined/Reserved names that are never evaluated via acpi_evaluate_object:
+ *          _Lxx and _Exx GPE methods
+ *          _Qxx EC methods
+ *          _T_x compiler temporary variables
+ *
+ *      2) Predefined names that never actually exist within the AML code:
+ *          Predefined resource descriptor field names
+ *
+ *      3) Predefined names that are implemented within ACPICA:
+ *          _OSI
+ *
+ *      4) Some predefined names that are not documented within the ACPI spec.
+ *          _WDG, _WED
+ *
+ * The main entries in the table each contain the following items:
+ *
+ * Name                 - The ACPI reserved name
+ * param_count          - Number of arguments to the method
+ * expected_btypes      - Allowed type(s) for the return value.
+ *                        0 means that no return value is expected.
+ *
+ * For methods that return packages, the next entry in the table contains
+ * information about the expected structure of the package. This information
+ * is saved here (rather than in a separate table) in order to minimize the
+ * overall size of the stored data.
+ */
+static const union acpi_predefined_info predefined_names[] = {
+	{.info = {"_AC0", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_AC1", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_AC2", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_AC3", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_AC4", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_AC5", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_AC6", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_AC7", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_AC8", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_AC9", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_ADR", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_AL0", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_AL1", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_AL2", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_AL3", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_AL4", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_AL5", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_AL6", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_AL7", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_AL8", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_AL9", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_ALC", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_ALI", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_ALP", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_ALR", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2, ACPI_RTYPE_INTEGER, 2, 0, 0, 0}},	/* variable (Pkgs) each 2 (Ints) */
+	{.info = {"_ALT", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_BBN", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_BCL", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 0, 0, 0, 0}},	/* variable (Ints) */
+	{.info = {"_BCM", 1, 0}},
+	{.info = {"_BDN", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_BFS", 1, 0}},
+	{.info = {"_BIF", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER,
+					  9,
+					  ACPI_RTYPE_STRING, 4, 0}},	/* fixed (9 Int),(4 Str) */
+	{.info = {"_BLT", 3, 0}},
+	{.info = {"_BMC", 1, 0}},
+	{.info = {"_BMD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}},	/* fixed (5 Int) */
+	{.info = {"_BQC", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_BST", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 4, 0, 0, 0}},	/* fixed (4 Int) */
+	{.info = {"_BTM", 1, ACPI_RTYPE_INTEGER}},
+	{.info = {"_BTP", 1, 0}},
+	{.info = {"_CBA", 0, ACPI_RTYPE_INTEGER}},	/* see PCI firmware spec 3.0 */
+	{.info = {"_CID", 0,
+	 ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING | ACPI_RTYPE_PACKAGE}},
+	{.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING, 0, 0, 0, 0}},	/* variable (Ints/Strs) */
+	{.info = {"_CRS", 0, ACPI_RTYPE_BUFFER}},
+	{.info = {"_CRT", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_CSD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_COUNT, ACPI_RTYPE_INTEGER, 0, 0, 0, 0}},	/* variable (1 Int(n), n-1 Int) */
+	{.info = {"_CST", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_PKG_COUNT,
+					  ACPI_RTYPE_BUFFER, 1,
+					  ACPI_RTYPE_INTEGER, 3, 0}},	/* variable (1 Int(n), n Pkg (1 Buf/3 Int) */
+	{.info = {"_DCK", 1, ACPI_RTYPE_INTEGER}},
+	{.info = {"_DCS", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_DDC", 1, ACPI_RTYPE_INTEGER | ACPI_RTYPE_BUFFER}},
+	{.info = {"_DDN", 0, ACPI_RTYPE_STRING}},
+	{.info = {"_DGS", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_DIS", 0, 0}},
+	{.info = {"_DMA", 0, ACPI_RTYPE_BUFFER}},
+	{.info = {"_DOD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 0, 0, 0, 0}},	/* variable (Ints) */
+	{.info = {"_DOS", 1, 0}},
+	{.info = {"_DSM", 4, ACPI_RTYPE_ALL}},	/* Must return a type, but it can be of any type */
+	{.info = {"_DSS", 1, 0}},
+	{.info = {"_DSW", 3, 0}},
+	{.info = {"_EC_", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_EDL", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_EJ0", 1, 0}},
+	{.info = {"_EJ1", 1, 0}},
+	{.info = {"_EJ2", 1, 0}},
+	{.info = {"_EJ3", 1, 0}},
+	{.info = {"_EJ4", 1, 0}},
+	{.info = {"_EJD", 0, ACPI_RTYPE_STRING}},
+	{.info = {"_FDE", 0, ACPI_RTYPE_BUFFER}},
+	{.info = {"_FDI", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 16, 0, 0, 0}},	/* fixed (16 Int) */
+	{.info = {"_FDM", 1, 0}},
+	{.info = {"_FIX", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 0, 0, 0, 0}},	/* variable (Ints) */
+	{.info = {"_GLK", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_GPD", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_GPE", 0, ACPI_RTYPE_INTEGER}},	/* _GPE method, not _GPE scope */
+	{.info = {"_GSB", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_GTF", 0, ACPI_RTYPE_BUFFER}},
+	{.info = {"_GTM", 0, ACPI_RTYPE_BUFFER}},
+	{.info = {"_GTS", 1, 0}},
+	{.info = {"_HID", 0, ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING}},
+	{.info = {"_HOT", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_HPP", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 4, 0, 0, 0}},	/* fixed (4 Int) */
+
+	/*
+	 * For _HPX, a single package is returned, containing a variable number of sub-packages.
+	 * Each sub-package contains a PCI record setting. There are several different type of
+	 * record settings, of different lengths, but all elements of all settings are Integers.
+	 */
+	{.info = {"_HPX", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_MIN, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}},	/* variable (Pkgs) each (var Ints) */
+	{.info = {"_IFT", 0, ACPI_RTYPE_INTEGER}},	/* see IPMI spec */
+	{.info = {"_INI", 0, 0}},
+	{.info = {"_IRC", 0, 0}},
+	{.info = {"_LCK", 1, 0}},
+	{.info = {"_LID", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_MAT", 0, ACPI_RTYPE_BUFFER}},
+	{.info = {"_MLS", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2, ACPI_RTYPE_STRING, 2, 0, 0, 0}},	/* variable (Pkgs) each (2 Str) */
+	{.info = {"_MSG", 1, 0}},
+	{.info = {"_OFF", 0, 0}},
+	{.info = {"_ON_", 0, 0}},
+	{.info = {"_OS_", 0, ACPI_RTYPE_STRING}},
+	{.info = {"_OSC", 4, ACPI_RTYPE_BUFFER}},
+	{.info = {"_OST", 3, 0}},
+	{.info = {"_PCL", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_PCT", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_BUFFER, 2, 0, 0, 0}},	/* fixed (2 Buf) */
+	{.info = {"_PDC", 1, 0}},
+	{.info = {"_PIC", 1, 0}},
+	{.info = {"_PLD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_BUFFER, 0, 0, 0, 0}},	/* variable (Bufs) */
+	{.info = {"_PPC", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_PPE", 0, ACPI_RTYPE_INTEGER}},	/* see dig64 spec */
+	{.info = {"_PR0", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_PR1", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_PR2", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_PRS", 0, ACPI_RTYPE_BUFFER}},
+
+	/*
+	 * For _PRT, many BIOSs reverse the 2nd and 3rd Package elements. This bug is so prevalent that there
+	 * is code in the ACPICA Resource Manager to detect this and switch them back. For now, do not allow
+	 * and issue a warning. To allow this and eliminate the warning, add the ACPI_RTYPE_REFERENCE
+	 * type to the 2nd element (index 1) in the statement below.
+	 */
+	{.info = {"_PRT", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_FIXED, 4,
+					  ACPI_RTYPE_INTEGER,
+					  ACPI_RTYPE_INTEGER,
+					  ACPI_RTYPE_INTEGER | ACPI_RTYPE_REFERENCE, ACPI_RTYPE_INTEGER}},	/* variable (Pkgs) each (4): Int,Int,Int/Ref,Int */
+
+	{.info = {"_PRW", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_OPTION, 2,
+					  ACPI_RTYPE_INTEGER |
+					  ACPI_RTYPE_PACKAGE,
+					  ACPI_RTYPE_INTEGER, ACPI_RTYPE_REFERENCE, 0}},	/* variable (Pkgs) each: Pkg/Int,Int,[variable Refs] (Pkg is Ref/Int) */
+
+	{.info = {"_PS0", 0, 0}},
+	{.info = {"_PS1", 0, 0}},
+	{.info = {"_PS2", 0, 0}},
+	{.info = {"_PS3", 0, 0}},
+	{.info = {"_PSC", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_PSD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_COUNT, ACPI_RTYPE_INTEGER, 0, 0, 0, 0}},	/* variable (Pkgs) each (5 Int) with count */
+	{.info = {"_PSL", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_PSR", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_PSS", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2, ACPI_RTYPE_INTEGER, 6, 0, 0, 0}},	/* variable (Pkgs) each (6 Int) */
+	{.info = {"_PSV", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_PSW", 1, 0}},
+	{.info = {"_PTC", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_BUFFER, 2, 0, 0, 0}},	/* fixed (2 Buf) */
+	{.info = {"_PTS", 1, 0}},
+	{.info = {"_PXM", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_REG", 2, 0}},
+	{.info = {"_REV", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_RMV", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_ROM", 2, ACPI_RTYPE_BUFFER}},
+	{.info = {"_RTV", 0, ACPI_RTYPE_INTEGER}},
+
+	/*
+	 * For _S0_ through _S5_, the ACPI spec defines a return Package containing 1 Integer,
+	 * but most DSDTs have it wrong - 2,3, or 4 integers. Allow this by making the objects "variable length",
+	 * but all elements must be Integers.
+	 */
+	{.info = {"_S0_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}},	/* fixed (1 Int) */
+	{.info = {"_S1_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}},	/* fixed (1 Int) */
+	{.info = {"_S2_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}},	/* fixed (1 Int) */
+	{.info = {"_S3_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}},	/* fixed (1 Int) */
+	{.info = {"_S4_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}},	/* fixed (1 Int) */
+	{.info = {"_S5_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}},	/* fixed (1 Int) */
+
+	{.info = {"_S1D", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_S2D", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_S3D", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_S4D", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_S0W", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_S1W", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_S2W", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_S3W", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_S4W", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_SBS", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_SCP", 0x13, 0}},	/* Acpi 1.0 allowed 1 arg. Acpi 3.0 expanded to 3 args. Allow both. */
+	/* Note: the 3-arg definition may be removed for ACPI 4.0 */
+	{.info = {"_SDD", 1, 0}},
+	{.info = {"_SEG", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_SLI", 0, ACPI_RTYPE_BUFFER}},
+	{.info = {"_SPD", 1, ACPI_RTYPE_INTEGER}},
+	{.info = {"_SRS", 1, 0}},
+	{.info = {"_SRV", 0, ACPI_RTYPE_INTEGER}},	/* see IPMI spec */
+	{.info = {"_SST", 1, 0}},
+	{.info = {"_STA", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_STM", 3, 0}},
+	{.info = {"_STR", 0, ACPI_RTYPE_BUFFER}},
+	{.info = {"_SUN", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_SWS", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_TC1", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_TC2", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_TMP", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_TPC", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_TPT", 1, 0}},
+	{.info = {"_TRT", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2, ACPI_RTYPE_REFERENCE, 2,
+					  ACPI_RTYPE_INTEGER, 6, 0}},	/* variable (Pkgs) each 2_ref/6_int */
+	{.info = {"_TSD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_COUNT, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}},	/* variable (Pkgs) each 5_int with count */
+	{.info = {"_TSP", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_TSS", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}},	/* variable (Pkgs) each 5_int */
+	{.info = {"_TST", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_TTS", 1, 0}},
+	{.info = {"_TZD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}},	/* variable (Refs) */
+	{.info = {"_TZM", 0, ACPI_RTYPE_REFERENCE}},
+	{.info = {"_TZP", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_UID", 0, ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING}},
+	{.info = {"_UPC", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 4, 0, 0, 0}},	/* fixed (4 Int) */
+	{.info = {"_UPD", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_UPP", 0, ACPI_RTYPE_INTEGER}},
+	{.info = {"_VPO", 0, ACPI_RTYPE_INTEGER}},
+
+	/* Acpi 1.0 defined _WAK with no return value. Later, it was changed to return a package */
+
+	{.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_PACKAGE}},
+	{.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2, 0, 0, 0}},	/* fixed (2 Int), but is optional */
+	{.ret_info = {0, 0, 0, 0, 0, 0}}	/* Table terminator */
+};
+
+#if 0
+	/* Not implemented */
+
+{
+"_WDG", 0, ACPI_RTYPE_BUFFER},	/* MS Extension */
+
+{
+"_WED", 1, ACPI_RTYPE_PACKAGE},	/* MS Extension */
+
+    /* This is an internally implemented control method, no need to check */
+{
+"_OSI", 1, ACPI_RTYPE_INTEGER},
+
+    /* TBD: */
+    _PRT - currently ignore reversed entries.attempt to fix here ?
+    think about code that attempts to fix package elements like _BIF, etc.
+#endif
+#endif
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
index d38f9be2..63f5b4c 100644
--- a/include/acpi/actbl1.h
+++ b/include/acpi/actbl1.h
@@ -908,7 +908,9 @@
 	ACPI_MADT_TYPE_IO_SAPIC = 6,
 	ACPI_MADT_TYPE_LOCAL_SAPIC = 7,
 	ACPI_MADT_TYPE_INTERRUPT_SOURCE = 8,
-	ACPI_MADT_TYPE_RESERVED = 9	/* 9 and greater are reserved */
+	ACPI_MADT_TYPE_LOCAL_X2APIC = 9,
+	ACPI_MADT_TYPE_LOCAL_X2APIC_NMI = 10,
+	ACPI_MADT_TYPE_RESERVED = 11	/* 11 and greater are reserved */
 };
 
 /*
@@ -1009,6 +1011,26 @@
 
 #define ACPI_MADT_CPEI_OVERRIDE     (1)
 
+/* 9: Processor Local X2_APIC (07/2008) */
+
+struct acpi_madt_local_x2apic {
+	struct acpi_subtable_header header;
+	u16 reserved;		/* Reserved - must be zero */
+	u32 local_apic_id;	/* Processor X2_APIC ID  */
+	u32 lapic_flags;
+	u32 uid;		/* Extended X2_APIC processor ID */
+};
+
+/* 10: Local X2APIC NMI (07/2008) */
+
+struct acpi_madt_local_x2apic_nmi {
+	struct acpi_subtable_header header;
+	u16 inti_flags;
+	u32 uid;		/* Processor X2_APIC ID */
+	u8 lint;		/* LINTn to which NMI is connected */
+	u8 reserved[3];
+};
+
 /*
  * Common flags fields for MADT subtables
  */
@@ -1150,10 +1172,15 @@
 enum acpi_srat_type {
 	ACPI_SRAT_TYPE_CPU_AFFINITY = 0,
 	ACPI_SRAT_TYPE_MEMORY_AFFINITY = 1,
-	ACPI_SRAT_TYPE_RESERVED = 2
+	ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY = 2,
+	ACPI_SRAT_TYPE_RESERVED = 3	/* 3 and greater are reserved */
 };
 
-/* SRAT sub-tables */
+/*
+ * SRAT Sub-tables, correspond to Type in struct acpi_subtable_header
+ */
+
+/* 0: Processor Local APIC/SAPIC Affinity */
 
 struct acpi_srat_cpu_affinity {
 	struct acpi_subtable_header header;
@@ -1165,9 +1192,7 @@
 	u32 reserved;		/* Reserved, must be zero */
 };
 
-/* Flags */
-
-#define ACPI_SRAT_CPU_ENABLED       (1)	/* 00: Use affinity structure */
+/* 1: Memory Affinity */
 
 struct acpi_srat_mem_affinity {
 	struct acpi_subtable_header header;
@@ -1186,6 +1211,20 @@
 #define ACPI_SRAT_MEM_HOT_PLUGGABLE (1<<1)	/* 01: Memory region is hot pluggable */
 #define ACPI_SRAT_MEM_NON_VOLATILE  (1<<2)	/* 02: Memory region is non-volatile */
 
+/* 2: Processor Local X2_APIC Affinity (07/2008) */
+
+struct acpi_srat_x2apic_cpu_affinity {
+	struct acpi_subtable_header header;
+	u16 reserved;		/* Reserved, must be zero */
+	u32 proximity_domain;
+	u32 apic_id;
+	u32 flags;
+};
+
+/* Flags for struct acpi_srat_cpu_affinity and struct acpi_srat_x2apic_cpu_affinity */
+
+#define ACPI_SRAT_CPU_ENABLED       (1)	/* 00: Use affinity structure */
+
 /*******************************************************************************
  *
  * TCPA - Trusted Computing Platform Alliance table
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 4ea4f40..e8936ab 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -607,8 +607,15 @@
 
 /*
  * bit_register IDs
- * These are bitfields defined within the full ACPI registers
+ *
+ * These values are intended to be used by the hardware interfaces
+ * and are mapped to individual bitfields defined within the ACPI
+ * registers. See the acpi_gbl_bit_register_info global table in utglobal.c
+ * for this mapping.
  */
+
+/* PM1 Status register */
+
 #define ACPI_BITREG_TIMER_STATUS                0x00
 #define ACPI_BITREG_BUS_MASTER_STATUS           0x01
 #define ACPI_BITREG_GLOBAL_LOCK_STATUS          0x02
@@ -618,24 +625,29 @@
 #define ACPI_BITREG_WAKE_STATUS                 0x06
 #define ACPI_BITREG_PCIEXP_WAKE_STATUS          0x07
 
+/* PM1 Enable register */
+
 #define ACPI_BITREG_TIMER_ENABLE                0x08
 #define ACPI_BITREG_GLOBAL_LOCK_ENABLE          0x09
 #define ACPI_BITREG_POWER_BUTTON_ENABLE         0x0A
 #define ACPI_BITREG_SLEEP_BUTTON_ENABLE         0x0B
 #define ACPI_BITREG_RT_CLOCK_ENABLE             0x0C
-#define ACPI_BITREG_WAKE_ENABLE                 0x0D
-#define ACPI_BITREG_PCIEXP_WAKE_DISABLE         0x0E
+#define ACPI_BITREG_PCIEXP_WAKE_DISABLE         0x0D
 
-#define ACPI_BITREG_SCI_ENABLE                  0x0F
-#define ACPI_BITREG_BUS_MASTER_RLD              0x10
-#define ACPI_BITREG_GLOBAL_LOCK_RELEASE         0x11
-#define ACPI_BITREG_SLEEP_TYPE_A                0x12
-#define ACPI_BITREG_SLEEP_TYPE_B                0x13
-#define ACPI_BITREG_SLEEP_ENABLE                0x14
+/* PM1 Control register */
 
-#define ACPI_BITREG_ARB_DISABLE                 0x15
+#define ACPI_BITREG_SCI_ENABLE                  0x0E
+#define ACPI_BITREG_BUS_MASTER_RLD              0x0F
+#define ACPI_BITREG_GLOBAL_LOCK_RELEASE         0x10
+#define ACPI_BITREG_SLEEP_TYPE_A                0x11
+#define ACPI_BITREG_SLEEP_TYPE_B                0x12
+#define ACPI_BITREG_SLEEP_ENABLE                0x13
 
-#define ACPI_BITREG_MAX                         0x15
+/* PM2 Control register */
+
+#define ACPI_BITREG_ARB_DISABLE                 0x14
+
+#define ACPI_BITREG_MAX                         0x14
 #define ACPI_NUM_BITREG                         ACPI_BITREG_MAX + 1
 
 /*
@@ -859,6 +871,7 @@
 struct acpi_device_info {
 	ACPI_COMMON_OBJ_INFO;
 
+	u32 param_count;	/* If a method, required parameter count */
 	u32 valid;		/* Indicates which fields below are valid */
 	u32 current_status;	/* _STA value */
 	acpi_integer address;	/* _ADR value if any */
@@ -1225,8 +1238,8 @@
 
 #pragma pack()
 
-#define ACPI_RS_SIZE_MIN                    12
 #define ACPI_RS_SIZE_NO_DATA                8	/* Id + Length fields */
+#define ACPI_RS_SIZE_MIN                    (u32) ACPI_ROUND_UP_TO_NATIVE_WORD (12)
 #define ACPI_RS_SIZE(type)                  (u32) (ACPI_RS_SIZE_NO_DATA + sizeof (type))
 
 #define ACPI_NEXT_RESOURCE(res)             (struct acpi_resource *)((u8 *) res + res->length)
diff --git a/include/acpi/acutils.h b/include/acpi/acutils.h
index 69f8888..d8307b2 100644
--- a/include/acpi/acutils.h
+++ b/include/acpi/acutils.h
@@ -110,7 +110,7 @@
 /*
  * utglobal - Global data structures and procedures
  */
-void acpi_ut_init_globals(void);
+acpi_status acpi_ut_init_globals(void);
 
 #if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
 
@@ -126,6 +126,8 @@
 
 char *acpi_ut_get_descriptor_name(void *object);
 
+const char *acpi_ut_get_reference_name(union acpi_operand_object *object);
+
 char *acpi_ut_get_object_type_name(union acpi_operand_object *obj_desc);
 
 char *acpi_ut_get_region_name(u8 space_id);
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
index 9af4645..029c8c0 100644
--- a/include/acpi/platform/aclinux.h
+++ b/include/acpi/platform/aclinux.h
@@ -53,6 +53,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/ctype.h>
+#include <linux/sched.h>
 #include <asm/system.h>
 #include <asm/atomic.h>
 #include <asm/div64.h>
@@ -137,4 +138,9 @@
 #define ACPI_ALLOCATE_ZEROED(a)	acpi_os_allocate_zeroed(a)
 #define ACPI_FREE(a)		kfree(a)
 
+/*
+ * We need to show where it is safe to preempt execution of ACPICA
+ */
+#define ACPI_PREEMPTION_POINT()	cond_resched()
+
 #endif				/* __ACLINUX_H__ */
diff --git a/include/asm-generic/mutex-dec.h b/include/asm-generic/mutex-dec.h
index ed108be..f104af7 100644
--- a/include/asm-generic/mutex-dec.h
+++ b/include/asm-generic/mutex-dec.h
@@ -22,8 +22,6 @@
 {
 	if (unlikely(atomic_dec_return(count) < 0))
 		fail_fn(count);
-	else
-		smp_mb();
 }
 
 /**
@@ -41,10 +39,7 @@
 {
 	if (unlikely(atomic_dec_return(count) < 0))
 		return fail_fn(count);
-	else {
-		smp_mb();
-		return 0;
-	}
+	return 0;
 }
 
 /**
@@ -63,7 +58,6 @@
 static inline void
 __mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
 {
-	smp_mb();
 	if (unlikely(atomic_inc_return(count) <= 0))
 		fail_fn(count);
 }
@@ -88,25 +82,9 @@
 static inline int
 __mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
 {
-	/*
-	 * We have two variants here. The cmpxchg based one is the best one
-	 * because it never induce a false contention state.  It is included
-	 * here because architectures using the inc/dec algorithms over the
-	 * xchg ones are much more likely to support cmpxchg natively.
-	 *
-	 * If not we fall back to the spinlock based variant - that is
-	 * just as efficient (and simpler) as a 'destructive' probing of
-	 * the mutex state would be.
-	 */
-#ifdef __HAVE_ARCH_CMPXCHG
-	if (likely(atomic_cmpxchg(count, 1, 0) == 1)) {
-		smp_mb();
+	if (likely(atomic_cmpxchg(count, 1, 0) == 1))
 		return 1;
-	}
 	return 0;
-#else
-	return fail_fn(count);
-#endif
 }
 
 #endif
diff --git a/include/asm-generic/mutex-xchg.h b/include/asm-generic/mutex-xchg.h
index 7b9cd2c..580a6d3 100644
--- a/include/asm-generic/mutex-xchg.h
+++ b/include/asm-generic/mutex-xchg.h
@@ -27,8 +27,6 @@
 {
 	if (unlikely(atomic_xchg(count, 0) != 1))
 		fail_fn(count);
-	else
-		smp_mb();
 }
 
 /**
@@ -46,10 +44,7 @@
 {
 	if (unlikely(atomic_xchg(count, 0) != 1))
 		return fail_fn(count);
-	else {
-		smp_mb();
-		return 0;
-	}
+	return 0;
 }
 
 /**
@@ -67,7 +62,6 @@
 static inline void
 __mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
 {
-	smp_mb();
 	if (unlikely(atomic_xchg(count, 1) != 0))
 		fail_fn(count);
 }
@@ -110,7 +104,6 @@
 		if (prev < 0)
 			prev = 0;
 	}
-	smp_mb();
 
 	return prev;
 }
diff --git a/include/asm-m68k/machdep.h b/include/asm-m68k/machdep.h
index 26d2b91..5637dce 100644
--- a/include/asm-m68k/machdep.h
+++ b/include/asm-m68k/machdep.h
@@ -14,7 +14,7 @@
 /* machine dependent irq functions */
 extern void (*mach_init_IRQ) (void);
 extern void (*mach_get_model) (char *model);
-extern int (*mach_get_hardware_list) (char *buffer);
+extern void (*mach_get_hardware_list) (struct seq_file *m);
 /* machine dependent timer functions */
 extern unsigned long (*mach_gettimeoffset)(void);
 extern int (*mach_hwclk)(int, struct rtc_time*);
diff --git a/include/asm-um/a.out.h b/include/asm-um/a.out.h
deleted file mode 100644
index 754181e..0000000
--- a/include/asm-um/a.out.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * Copyright (C) 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __UM_A_OUT_H
-#define __UM_A_OUT_H
-
-#include "asm/arch/a.out.h"
-
-#endif
diff --git a/include/asm-um/alternative-asm.h b/include/asm-um/alternative-asm.h
deleted file mode 100644
index 9aa9fa2..0000000
--- a/include/asm-um/alternative-asm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_ALTERNATIVE_ASM_I
-#define __UM_ALTERNATIVE_ASM_I
-
-#include "asm/arch/alternative-asm.h"
-
-#endif
diff --git a/include/asm-um/alternative.h b/include/asm-um/alternative.h
deleted file mode 100644
index b643439..0000000
--- a/include/asm-um/alternative.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_ALTERNATIVE_H
-#define __UM_ALTERNATIVE_H
-
-#include "asm/arch/alternative.h"
-
-#endif
diff --git a/include/asm-um/archparam-i386.h b/include/asm-um/archparam-i386.h
deleted file mode 100644
index 49e89b8..0000000
--- a/include/asm-um/archparam-i386.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* 
- * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#ifndef __UM_ARCHPARAM_I386_H
-#define __UM_ARCHPARAM_I386_H
-
-/********* Nothing for asm-um/hardirq.h **********/
-
-/********* Nothing for asm-um/hw_irq.h **********/
-
-/********* Nothing for asm-um/string.h **********/
-
-#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/include/asm-um/asm.h b/include/asm-um/asm.h
deleted file mode 100644
index af1269a..0000000
--- a/include/asm-um/asm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_ASM_H
-#define __UM_ASM_H
-
-#include "asm/arch/asm.h"
-
-#endif
diff --git a/include/asm-um/atomic.h b/include/asm-um/atomic.h
deleted file mode 100644
index b683f10..0000000
--- a/include/asm-um/atomic.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __UM_ATOMIC_H
-#define __UM_ATOMIC_H
-
-/* The i386 atomic.h calls printk, but doesn't include kernel.h, so we
- * include it here.
- */
-#include "linux/kernel.h"
-
-#include "asm/arch/atomic.h"
-
-#endif
diff --git a/include/asm-um/bitops.h b/include/asm-um/bitops.h
deleted file mode 100644
index e4d38d4..0000000
--- a/include/asm-um/bitops.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __UM_BITOPS_H
-#define __UM_BITOPS_H
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include "asm/arch/bitops.h"
-
-#endif
diff --git a/include/asm-um/boot.h b/include/asm-um/boot.h
deleted file mode 100644
index 09548c3..0000000
--- a/include/asm-um/boot.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_BOOT_H
-#define __UM_BOOT_H
-
-#include "asm/arch/boot.h"
-
-#endif
diff --git a/include/asm-um/bug.h b/include/asm-um/bug.h
deleted file mode 100644
index 9e33b86..0000000
--- a/include/asm-um/bug.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_BUG_H
-#define __UM_BUG_H
-
-#include <asm-generic/bug.h>
-
-#endif
diff --git a/include/asm-um/byteorder.h b/include/asm-um/byteorder.h
deleted file mode 100644
index eee0a83..0000000
--- a/include/asm-um/byteorder.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_BYTEORDER_H
-#define __UM_BYTEORDER_H
-
-#include "asm/arch/byteorder.h"
-
-#endif
diff --git a/include/asm-um/cacheflush.h b/include/asm-um/cacheflush.h
deleted file mode 100644
index 12e9d4b..0000000
--- a/include/asm-um/cacheflush.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_CACHEFLUSH_H
-#define __UM_CACHEFLUSH_H
-
-#include "asm/arch/cacheflush.h"
-
-#endif
diff --git a/include/asm-um/calling.h b/include/asm-um/calling.h
deleted file mode 100644
index 0b2384c..0000000
--- a/include/asm-um/calling.h
+++ /dev/null
@@ -1,9 +0,0 @@
-# Copyright 2003 - 2004 Pathscale, Inc
-# Released under the GPL
-
-#ifndef __UM_CALLING_H /* XXX x86_64 */
-#define __UM_CALLING_H
-
-#include "asm/arch/calling.h"
-
-#endif
diff --git a/include/asm-um/cmpxchg.h b/include/asm-um/cmpxchg.h
deleted file mode 100644
index 529376a9..0000000
--- a/include/asm-um/cmpxchg.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_CMPXCHG_H
-#define __UM_CMPXCHG_H
-
-#include "asm/arch/cmpxchg.h"
-
-#endif
diff --git a/include/asm-um/cobalt.h b/include/asm-um/cobalt.h
deleted file mode 100644
index f813a68..0000000
--- a/include/asm-um/cobalt.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_COBALT_H
-#define __UM_COBALT_H
-
-#include "asm/arch/cobalt.h"
-
-#endif
diff --git a/include/asm-um/cpufeature.h b/include/asm-um/cpufeature.h
deleted file mode 100644
index fb7bd42..0000000
--- a/include/asm-um/cpufeature.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_CPUFEATURE_H
-#define __UM_CPUFEATURE_H
-
-#include "asm/arch/cpufeature.h"
-
-#endif
diff --git a/include/asm-um/div64.h b/include/asm-um/div64.h
deleted file mode 100644
index 1e17f74..0000000
--- a/include/asm-um/div64.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _UM_DIV64_H
-#define _UM_DIV64_H
-
-#include "asm/arch/div64.h"
-
-#endif
diff --git a/include/asm-um/dwarf2.h b/include/asm-um/dwarf2.h
deleted file mode 100644
index d1a02e7..0000000
--- a/include/asm-um/dwarf2.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* Copyright 2003 - 2004 Pathscale, Inc
- * Released under the GPL
- */
-
-/* Needed on x86_64 by thunk.S */
-#ifndef __UM_DWARF2_H
-#define __UM_DWARF2_H
-
-#include "asm/arch/dwarf2.h"
-
-#endif
diff --git a/include/asm-um/errno.h b/include/asm-um/errno.h
deleted file mode 100644
index b7a9e37..0000000
--- a/include/asm-um/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_ERRNO_H
-#define __UM_ERRNO_H
-
-#include "asm/arch/errno.h"
-
-#endif
diff --git a/include/asm-um/fcntl.h b/include/asm-um/fcntl.h
deleted file mode 100644
index 812a654..0000000
--- a/include/asm-um/fcntl.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_FCNTL_H
-#define __UM_FCNTL_H
-
-#include "asm/arch/fcntl.h"
-
-#endif
diff --git a/include/asm-um/fixmap.h b/include/asm-um/fixmap.h
deleted file mode 100644
index 9d2be52..0000000
--- a/include/asm-um/fixmap.h
+++ /dev/null
@@ -1,98 +0,0 @@
-#ifndef __UM_FIXMAP_H
-#define __UM_FIXMAP_H
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/kmap_types.h>
-#include <asm/archparam.h>
-#include <asm/page.h>
-
-/*
- * Here we define all the compile-time 'special' virtual
- * addresses. The point is to have a constant address at
- * compile time, but to set the physical address only
- * in the boot process. We allocate these special  addresses
- * from the end of virtual memory (0xfffff000) backwards.
- * Also this lets us do fail-safe vmalloc(), we
- * can guarantee that these special addresses and
- * vmalloc()-ed addresses never overlap.
- *
- * these 'compile-time allocated' memory buffers are
- * fixed-size 4k pages. (or larger if used with an increment
- * highger than 1) use fixmap_set(idx,phys) to associate
- * physical memory with fixmap indices.
- *
- * TLB entries of such buffers will not be flushed across
- * task switches.
- */
-
-/*
- * on UP currently we will have no trace of the fixmap mechanizm,
- * no page table allocations, etc. This might change in the
- * future, say framebuffers for the console driver(s) could be
- * fix-mapped?
- */
-enum fixed_addresses {
-#ifdef CONFIG_HIGHMEM
-	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
-	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
-#endif
-	__end_of_fixed_addresses
-};
-
-extern void __set_fixmap (enum fixed_addresses idx,
-			  unsigned long phys, pgprot_t flags);
-
-#define set_fixmap(idx, phys) \
-		__set_fixmap(idx, phys, PAGE_KERNEL)
-/*
- * Some hardware wants to get fixmapped without caching.
- */
-#define set_fixmap_nocache(idx, phys) \
-		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
-/*
- * used by vmalloc.c.
- *
- * Leave one empty page between vmalloc'ed areas and
- * the start of the fixmap, and leave one page empty
- * at the top of mem..
- */
-
-#define FIXADDR_TOP	(TASK_SIZE - 2 * PAGE_SIZE)
-#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
-#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
-
-#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
-#define __virt_to_fix(x)      ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
-
-extern void __this_fixmap_does_not_exist(void);
-
-/*
- * 'index to address' translation. If anyone tries to use the idx
- * directly without tranlation, we catch the bug with a NULL-deference
- * kernel oops. Illegal ranges of incoming indices are caught too.
- */
-static inline unsigned long fix_to_virt(const unsigned int idx)
-{
-	/*
-	 * this branch gets completely eliminated after inlining,
-	 * except when someone tries to use fixaddr indices in an
-	 * illegal way. (such as mixing up address types or using
-	 * out-of-range indices).
-	 *
-	 * If it doesn't get removed, the linker will complain
-	 * loudly with a reasonably clear error message..
-	 */
-	if (idx >= __end_of_fixed_addresses)
-		__this_fixmap_does_not_exist();
-
-        return __fix_to_virt(idx);
-}
-
-static inline unsigned long virt_to_fix(const unsigned long vaddr)
-{
-      BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
-      return __virt_to_fix(vaddr);
-}
-
-#endif
diff --git a/include/asm-um/floppy.h b/include/asm-um/floppy.h
deleted file mode 100644
index 453e741..0000000
--- a/include/asm-um/floppy.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_FLOPPY_H
-#define __UM_FLOPPY_H
-
-#include "asm/arch/floppy.h"
-
-#endif
diff --git a/include/asm-um/frame.h b/include/asm-um/frame.h
deleted file mode 100644
index 8a8c1cb..0000000
--- a/include/asm-um/frame.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_FRAME_I
-#define __UM_FRAME_I
-
-#include "asm/arch/frame.h"
-
-#endif
diff --git a/include/asm-um/highmem.h b/include/asm-um/highmem.h
deleted file mode 100644
index 36974cb..0000000
--- a/include/asm-um/highmem.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __UM_HIGHMEM_H
-#define __UM_HIGHMEM_H
-
-#include "asm/page.h"
-#include "asm/fixmap.h"
-#include "asm/arch/highmem.h"
-
-#undef PKMAP_BASE
-
-#define PKMAP_BASE ((FIXADDR_START - LAST_PKMAP * PAGE_SIZE) & PMD_MASK)
-
-#endif
diff --git a/include/asm-um/host_ldt-i386.h b/include/asm-um/host_ldt-i386.h
deleted file mode 100644
index b27cb0a..0000000
--- a/include/asm-um/host_ldt-i386.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ASM_HOST_LDT_I386_H
-#define __ASM_HOST_LDT_I386_H
-
-#include "asm/arch/ldt.h"
-
-/*
- * macros stolen from include/asm-i386/desc.h
- */
-#define LDT_entry_a(info) \
-	((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
-
-#define LDT_entry_b(info) \
-	(((info)->base_addr & 0xff000000) | \
-	(((info)->base_addr & 0x00ff0000) >> 16) | \
-	((info)->limit & 0xf0000) | \
-	(((info)->read_exec_only ^ 1) << 9) | \
-	((info)->contents << 10) | \
-	(((info)->seg_not_present ^ 1) << 15) | \
-	((info)->seg_32bit << 22) | \
-	((info)->limit_in_pages << 23) | \
-	((info)->useable << 20) | \
-	0x7000)
-
-#define LDT_empty(info) (\
-	(info)->base_addr	== 0	&& \
-	(info)->limit		== 0	&& \
-	(info)->contents	== 0	&& \
-	(info)->read_exec_only	== 1	&& \
-	(info)->seg_32bit	== 0	&& \
-	(info)->limit_in_pages	== 0	&& \
-	(info)->seg_not_present	== 1	&& \
-	(info)->useable		== 0	)
-
-#endif
diff --git a/include/asm-um/host_ldt-x86_64.h b/include/asm-um/host_ldt-x86_64.h
deleted file mode 100644
index 74a63f7..0000000
--- a/include/asm-um/host_ldt-x86_64.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef __ASM_HOST_LDT_X86_64_H
-#define __ASM_HOST_LDT_X86_64_H
-
-#include "asm/arch/ldt.h"
-
-/*
- * macros stolen from include/asm-x86_64/desc.h
- */
-#define LDT_entry_a(info) \
-	((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
-
-/* Don't allow setting of the lm bit. It is useless anyways because
- * 64bit system calls require __USER_CS. */
-#define LDT_entry_b(info) \
-	(((info)->base_addr & 0xff000000) | \
-	(((info)->base_addr & 0x00ff0000) >> 16) | \
-	((info)->limit & 0xf0000) | \
-	(((info)->read_exec_only ^ 1) << 9) | \
-	((info)->contents << 10) | \
-	(((info)->seg_not_present ^ 1) << 15) | \
-	((info)->seg_32bit << 22) | \
-	((info)->limit_in_pages << 23) | \
-	((info)->useable << 20) | \
-	/* ((info)->lm << 21) | */ \
-	0x7000)
-
-#define LDT_empty(info) (\
-	(info)->base_addr	== 0	&& \
-	(info)->limit		== 0	&& \
-	(info)->contents	== 0	&& \
-	(info)->read_exec_only	== 1	&& \
-	(info)->seg_32bit	== 0	&& \
-	(info)->limit_in_pages	== 0	&& \
-	(info)->seg_not_present	== 1	&& \
-	(info)->useable		== 0	&& \
-	(info)->lm              == 0)
-
-#endif
diff --git a/include/asm-um/ide.h b/include/asm-um/ide.h
deleted file mode 100644
index 3d1cceb..0000000
--- a/include/asm-um/ide.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_IDE_H
-#define __UM_IDE_H
-
-#include "asm/arch/ide.h"
-
-#endif
diff --git a/include/asm-um/ioctl.h b/include/asm-um/ioctl.h
deleted file mode 100644
index cc22157..0000000
--- a/include/asm-um/ioctl.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_IOCTL_H
-#define __UM_IOCTL_H
-
-#include "asm/arch/ioctl.h"
-
-#endif
diff --git a/include/asm-um/ioctls.h b/include/asm-um/ioctls.h
deleted file mode 100644
index 9a1a017d..0000000
--- a/include/asm-um/ioctls.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_IOCTLS_H
-#define __UM_IOCTLS_H
-
-#include "asm/arch/ioctls.h"
-
-#endif
diff --git a/include/asm-um/ipcbuf.h b/include/asm-um/ipcbuf.h
deleted file mode 100644
index bb2ad31..0000000
--- a/include/asm-um/ipcbuf.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_IPCBUF_H
-#define __UM_IPCBUF_H
-
-#include "asm/arch/ipcbuf.h"
-
-#endif
diff --git a/include/asm-um/ldt.h b/include/asm-um/ldt.h
deleted file mode 100644
index 52af512..0000000
--- a/include/asm-um/ldt.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
- * Licensed under the GPL
- *
- * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
- */
-
-#ifndef __ASM_LDT_H
-#define __ASM_LDT_H
-
-#include <linux/mutex.h>
-#include "asm/host_ldt.h"
-
-extern void ldt_host_info(void);
-
-#define LDT_PAGES_MAX \
-	((LDT_ENTRIES * LDT_ENTRY_SIZE)/PAGE_SIZE)
-#define LDT_ENTRIES_PER_PAGE \
-	(PAGE_SIZE/LDT_ENTRY_SIZE)
-#define LDT_DIRECT_ENTRIES \
-	((LDT_PAGES_MAX*sizeof(void *))/LDT_ENTRY_SIZE)
-
-struct ldt_entry {
-	__u32 a;
-	__u32 b;
-};
-
-typedef struct uml_ldt {
-	int entry_count;
-	struct mutex lock;
-	union {
-		struct ldt_entry * pages[LDT_PAGES_MAX];
-		struct ldt_entry entries[LDT_DIRECT_ENTRIES];
-	} u;
-} uml_ldt_t;
-
-#endif
diff --git a/include/asm-um/linkage.h b/include/asm-um/linkage.h
deleted file mode 100644
index 7dfce37..0000000
--- a/include/asm-um/linkage.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_UM_LINKAGE_H
-#define __ASM_UM_LINKAGE_H
-
-#include "asm/arch/linkage.h"
-
-#endif
diff --git a/include/asm-um/local.h b/include/asm-um/local.h
deleted file mode 100644
index 9a280c5..0000000
--- a/include/asm-um/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_LOCAL_H
-#define __UM_LOCAL_H
-
-#include "asm/arch/local.h"
-
-#endif
diff --git a/include/asm-um/locks.h b/include/asm-um/locks.h
deleted file mode 100644
index f80030a..0000000
--- a/include/asm-um/locks.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_LOCKS_H
-#define __UM_LOCKS_H
-
-#include "asm/arch/locks.h"
-
-#endif
diff --git a/include/asm-um/mca_dma.h b/include/asm-um/mca_dma.h
deleted file mode 100644
index e492e4e..0000000
--- a/include/asm-um/mca_dma.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef mca___UM_DMA_H
-#define mca___UM_DMA_H
-
-#include "asm/arch/mca_dma.h"
-
-#endif
diff --git a/include/asm-um/mman.h b/include/asm-um/mman.h
deleted file mode 100644
index b09ed52..0000000
--- a/include/asm-um/mman.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_MMAN_H
-#define __UM_MMAN_H
-
-#include "asm/arch/mman.h"
-
-#endif
diff --git a/include/asm-um/module-generic.h b/include/asm-um/module-generic.h
deleted file mode 100644
index 5a265f5..0000000
--- a/include/asm-um/module-generic.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_MODULE_GENERIC_H
-#define __UM_MODULE_GENERIC_H
-
-#include "asm/arch/module.h"
-
-#endif
diff --git a/include/asm-um/msgbuf.h b/include/asm-um/msgbuf.h
deleted file mode 100644
index 8ce8c30..0000000
--- a/include/asm-um/msgbuf.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_MSGBUF_H
-#define __UM_MSGBUF_H
-
-#include "asm/arch/msgbuf.h"
-
-#endif
diff --git a/include/asm-um/mtrr.h b/include/asm-um/mtrr.h
deleted file mode 100644
index 5e9cd12..0000000
--- a/include/asm-um/mtrr.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_MTRR_H
-#define __UM_MTRR_H
-
-#include "asm/arch/mtrr.h"
-
-#endif
diff --git a/include/asm-um/nops.h b/include/asm-um/nops.h
deleted file mode 100644
index 814e9bf..0000000
--- a/include/asm-um/nops.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_NOPS_H
-#define __UM_NOPS_H
-
-#include "asm/arch/nops.h"
-
-#endif
diff --git a/include/asm-um/page.h b/include/asm-um/page.h
deleted file mode 100644
index a6df1f1..0000000
--- a/include/asm-um/page.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com)
- * Copyright 2003 PathScale, Inc.
- * Licensed under the GPL
- */
-
-#ifndef __UM_PAGE_H
-#define __UM_PAGE_H
-
-#include <linux/const.h>
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT	12
-#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
-#define PAGE_MASK	(~(PAGE_SIZE-1))
-
-#ifndef __ASSEMBLY__
-
-struct page;
-
-#include <linux/types.h>
-#include <asm/vm-flags.h>
-
-/*
- * These are used to make use of C type-checking..
- */
-
-#define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
-#define copy_page(to,from)	memcpy((void *)(to), (void *)(from), PAGE_SIZE)
-
-#define clear_user_page(page, vaddr, pg)	clear_page(page)
-#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
-
-#if defined(CONFIG_3_LEVEL_PGTABLES) && !defined(CONFIG_64BIT)
-
-typedef struct { unsigned long pte_low, pte_high; } pte_t;
-typedef struct { unsigned long pmd; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-#define pte_val(x) ((x).pte_low | ((unsigned long long) (x).pte_high << 32))
-
-#define pte_get_bits(pte, bits) ((pte).pte_low & (bits))
-#define pte_set_bits(pte, bits) ((pte).pte_low |= (bits))
-#define pte_clear_bits(pte, bits) ((pte).pte_low &= ~(bits))
-#define pte_copy(to, from) ({ (to).pte_high = (from).pte_high; \
-			      smp_wmb(); \
-			      (to).pte_low = (from).pte_low; })
-#define pte_is_zero(pte) (!((pte).pte_low & ~_PAGE_NEWPAGE) && !(pte).pte_high)
-#define pte_set_val(pte, phys, prot) \
-	({ (pte).pte_high = (phys) >> 32; \
-	   (pte).pte_low = (phys) | pgprot_val(prot); })
-
-#define pmd_val(x)	((x).pmd)
-#define __pmd(x) ((pmd_t) { (x) } )
-
-typedef unsigned long long pfn_t;
-typedef unsigned long long phys_t;
-
-#else
-
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pgd; } pgd_t;
-
-#ifdef CONFIG_3_LEVEL_PGTABLES
-typedef struct { unsigned long pmd; } pmd_t;
-#define pmd_val(x)	((x).pmd)
-#define __pmd(x) ((pmd_t) { (x) } )
-#endif
-
-#define pte_val(x)	((x).pte)
-
-
-#define pte_get_bits(p, bits) ((p).pte & (bits))
-#define pte_set_bits(p, bits) ((p).pte |= (bits))
-#define pte_clear_bits(p, bits) ((p).pte &= ~(bits))
-#define pte_copy(to, from) ((to).pte = (from).pte)
-#define pte_is_zero(p) (!((p).pte & ~_PAGE_NEWPAGE))
-#define pte_set_val(p, phys, prot) (p).pte = (phys | pgprot_val(prot))
-
-typedef unsigned long pfn_t;
-typedef unsigned long phys_t;
-
-#endif
-
-typedef struct { unsigned long pgprot; } pgprot_t;
-
-typedef struct page *pgtable_t;
-
-#define pgd_val(x)	((x).pgd)
-#define pgprot_val(x)	((x).pgprot)
-
-#define __pte(x) ((pte_t) { (x) } )
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x)	((pgprot_t) { (x) } )
-
-extern unsigned long uml_physmem;
-
-#define PAGE_OFFSET (uml_physmem)
-#define KERNELBASE PAGE_OFFSET
-
-#define __va_space (8*1024*1024)
-
-#include "mem.h"
-
-/* Cast to unsigned long before casting to void * to avoid a warning from
- * mmap_kmem about cutting a long long down to a void *.  Not sure that
- * casting is the right thing, but 32-bit UML can't have 64-bit virtual
- * addresses
- */
-#define __pa(virt) to_phys((void *) (unsigned long) (virt))
-#define __va(phys) to_virt((unsigned long) (phys))
-
-#define phys_to_pfn(p) ((pfn_t) ((p) >> PAGE_SHIFT))
-#define pfn_to_phys(pfn) ((phys_t) ((pfn) << PAGE_SHIFT))
-
-#define pfn_valid(pfn) ((pfn) < max_mapnr)
-#define virt_addr_valid(v) pfn_valid(phys_to_pfn(__pa(v)))
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
-
-#endif	/* __ASSEMBLY__ */
-#endif	/* __UM_PAGE_H */
diff --git a/include/asm-um/paravirt.h b/include/asm-um/paravirt.h
deleted file mode 100644
index 9d6aaad..0000000
--- a/include/asm-um/paravirt.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_PARAVIRT_H
-#define __UM_PARAVIRT_H
-
-#include "asm/arch/paravirt.h"
-
-#endif
diff --git a/include/asm-um/percpu.h b/include/asm-um/percpu.h
deleted file mode 100644
index 5723e2a..0000000
--- a/include/asm-um/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_PERCPU_H
-#define __UM_PERCPU_H
-
-#include "asm/arch/percpu.h"
-
-#endif
diff --git a/include/asm-um/pgtable.h b/include/asm-um/pgtable.h
deleted file mode 100644
index 02db81b..0000000
--- a/include/asm-um/pgtable.h
+++ /dev/null
@@ -1,358 +0,0 @@
-/* 
- * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Copyright 2003 PathScale, Inc.
- * Derived from include/asm-i386/pgtable.h
- * Licensed under the GPL
- */
-
-#ifndef __UM_PGTABLE_H
-#define __UM_PGTABLE_H
-
-#include <asm/fixmap.h>
-
-#define _PAGE_PRESENT	0x001
-#define _PAGE_NEWPAGE	0x002
-#define _PAGE_NEWPROT	0x004
-#define _PAGE_RW	0x020
-#define _PAGE_USER	0x040
-#define _PAGE_ACCESSED	0x080
-#define _PAGE_DIRTY	0x100
-/* If _PAGE_PRESENT is clear, we use these: */
-#define _PAGE_FILE	0x008	/* nonlinear file mapping, saved PTE; unset:swap */
-#define _PAGE_PROTNONE	0x010	/* if the user mapped it with PROT_NONE;
-				   pte_present gives true */
-
-#ifdef CONFIG_3_LEVEL_PGTABLES
-#include "asm/pgtable-3level.h"
-#else
-#include "asm/pgtable-2level.h"
-#endif
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
-/* zero page used for uninitialized stuff */
-extern unsigned long *empty_zero_page;
-
-#define pgtable_cache_init() do ; while (0)
-
-/* Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-
-extern unsigned long end_iomem;
-
-#define VMALLOC_OFFSET	(__va_space)
-#define VMALLOC_START ((end_iomem + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
-#ifdef CONFIG_HIGHMEM
-# define VMALLOC_END	(PKMAP_BASE-2*PAGE_SIZE)
-#else
-# define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
-#endif
-
-#define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
-
-#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
-#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED)
-#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
-#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
-#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED)
-
-/*
- * The i386 can't do page protection for execute, and considers that the same
- * are read.
- * Also, write permissions imply read permissions. This is the closest we can
- * get..
- */
-#define __P000	PAGE_NONE
-#define __P001	PAGE_READONLY
-#define __P010	PAGE_COPY
-#define __P011	PAGE_COPY
-#define __P100	PAGE_READONLY
-#define __P101	PAGE_READONLY
-#define __P110	PAGE_COPY
-#define __P111	PAGE_COPY
-
-#define __S000	PAGE_NONE
-#define __S001	PAGE_READONLY
-#define __S010	PAGE_SHARED
-#define __S011	PAGE_SHARED
-#define __S100	PAGE_READONLY
-#define __S101	PAGE_READONLY
-#define __S110	PAGE_SHARED
-#define __S111	PAGE_SHARED
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page)
-
-#define pte_clear(mm,addr,xp) pte_set_val(*(xp), (phys_t) 0, __pgprot(_PAGE_NEWPAGE))
-
-#define pmd_none(x)	(!((unsigned long)pmd_val(x) & ~_PAGE_NEWPAGE))
-#define	pmd_bad(x)	((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
-
-#define pmd_present(x)	(pmd_val(x) & _PAGE_PRESENT)
-#define pmd_clear(xp)	do { pmd_val(*(xp)) = _PAGE_NEWPAGE; } while (0)
-
-#define pmd_newpage(x)  (pmd_val(x) & _PAGE_NEWPAGE)
-#define pmd_mkuptodate(x) (pmd_val(x) &= ~_PAGE_NEWPAGE)
-
-#define pud_newpage(x)  (pud_val(x) & _PAGE_NEWPAGE)
-#define pud_mkuptodate(x) (pud_val(x) &= ~_PAGE_NEWPAGE)
-
-#define pmd_page(pmd) phys_to_page(pmd_val(pmd) & PAGE_MASK)
-
-#define pte_page(x) pfn_to_page(pte_pfn(x))
-
-#define pte_present(x)	pte_get_bits(x, (_PAGE_PRESENT | _PAGE_PROTNONE))
-
-/*
- * =================================
- * Flags checking section.
- * =================================
- */
-
-static inline int pte_none(pte_t pte)
-{
-	return pte_is_zero(pte);
-}
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_read(pte_t pte)
-{ 
-	return((pte_get_bits(pte, _PAGE_USER)) &&
-	       !(pte_get_bits(pte, _PAGE_PROTNONE)));
-}
-
-static inline int pte_exec(pte_t pte){
-	return((pte_get_bits(pte, _PAGE_USER)) &&
-	       !(pte_get_bits(pte, _PAGE_PROTNONE)));
-}
-
-static inline int pte_write(pte_t pte)
-{
-	return((pte_get_bits(pte, _PAGE_RW)) &&
-	       !(pte_get_bits(pte, _PAGE_PROTNONE)));
-}
-
-/*
- * The following only works if pte_present() is not true.
- */
-static inline int pte_file(pte_t pte)
-{
-	return pte_get_bits(pte, _PAGE_FILE);
-}
-
-static inline int pte_dirty(pte_t pte)
-{
-	return pte_get_bits(pte, _PAGE_DIRTY);
-}
-
-static inline int pte_young(pte_t pte)
-{
-	return pte_get_bits(pte, _PAGE_ACCESSED);
-}
-
-static inline int pte_newpage(pte_t pte)
-{
-	return pte_get_bits(pte, _PAGE_NEWPAGE);
-}
-
-static inline int pte_newprot(pte_t pte)
-{ 
-	return(pte_present(pte) && (pte_get_bits(pte, _PAGE_NEWPROT)));
-}
-
-static inline int pte_special(pte_t pte)
-{
-	return 0;
-}
-
-/*
- * =================================
- * Flags setting section.
- * =================================
- */
-
-static inline pte_t pte_mknewprot(pte_t pte)
-{
-	pte_set_bits(pte, _PAGE_NEWPROT);
-	return(pte);
-}
-
-static inline pte_t pte_mkclean(pte_t pte)
-{
-	pte_clear_bits(pte, _PAGE_DIRTY);
-	return(pte);
-}
-
-static inline pte_t pte_mkold(pte_t pte)	
-{ 
-	pte_clear_bits(pte, _PAGE_ACCESSED);
-	return(pte);
-}
-
-static inline pte_t pte_wrprotect(pte_t pte)
-{ 
-	pte_clear_bits(pte, _PAGE_RW);
-	return(pte_mknewprot(pte)); 
-}
-
-static inline pte_t pte_mkread(pte_t pte)
-{ 
-	pte_set_bits(pte, _PAGE_USER);
-	return(pte_mknewprot(pte)); 
-}
-
-static inline pte_t pte_mkdirty(pte_t pte)
-{ 
-	pte_set_bits(pte, _PAGE_DIRTY);
-	return(pte);
-}
-
-static inline pte_t pte_mkyoung(pte_t pte)
-{
-	pte_set_bits(pte, _PAGE_ACCESSED);
-	return(pte);
-}
-
-static inline pte_t pte_mkwrite(pte_t pte)	
-{
-	pte_set_bits(pte, _PAGE_RW);
-	return(pte_mknewprot(pte)); 
-}
-
-static inline pte_t pte_mkuptodate(pte_t pte)	
-{
-	pte_clear_bits(pte, _PAGE_NEWPAGE);
-	if(pte_present(pte))
-		pte_clear_bits(pte, _PAGE_NEWPROT);
-	return(pte); 
-}
-
-static inline pte_t pte_mknewpage(pte_t pte)
-{
-	pte_set_bits(pte, _PAGE_NEWPAGE);
-	return(pte);
-}
-
-static inline pte_t pte_mkspecial(pte_t pte)
-{
-	return(pte);
-}
-
-static inline void set_pte(pte_t *pteptr, pte_t pteval)
-{
-	pte_copy(*pteptr, pteval);
-
-	/* If it's a swap entry, it needs to be marked _PAGE_NEWPAGE so
-	 * fix_range knows to unmap it.  _PAGE_NEWPROT is specific to
-	 * mapped pages.
-	 */
-
-	*pteptr = pte_mknewpage(*pteptr);
-	if(pte_present(*pteptr)) *pteptr = pte_mknewprot(*pteptr);
-}
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-
-#define phys_to_page(phys) pfn_to_page(phys_to_pfn(phys))
-#define __virt_to_page(virt) phys_to_page(__pa(virt))
-#define page_to_phys(page) pfn_to_phys((pfn_t) page_to_pfn(page))
-#define virt_to_page(addr) __virt_to_page((const unsigned long) addr)
-
-#define mk_pte(page, pgprot) \
-	({ pte_t pte;					\
-							\
-	pte_set_val(pte, page_to_phys(page), (pgprot));	\
-	if (pte_present(pte))				\
-		pte_mknewprot(pte_mknewpage(pte));	\
-	pte;})
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	pte_set_val(pte, (pte_val(pte) & _PAGE_CHG_MASK), newprot);
-	return pte; 
-}
-
-/*
- * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
- *
- * this macro returns the index of the entry in the pgd page which would
- * control the given virtual address
- */
-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-
-/*
- * pgd_offset() returns a (pgd_t *)
- * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
- */
-#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
-
-/*
- * a shortcut which implies the use of the kernel's pgd, instead
- * of a process's
- */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/*
- * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
- *
- * this macro returns the index of the entry in the pmd page which would
- * control the given virtual address
- */
-#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
-#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
-
-#define pmd_page_vaddr(pmd) \
-	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
-
-/*
- * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
- *
- * this macro returns the index of the entry in the pte page which would
- * control the given virtual address
- */
-#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, address) \
-	((pte_t *) pmd_page_vaddr(*(dir)) +  pte_index(address))
-#define pte_offset_map(dir, address) \
-	((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address))
-#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
-#define pte_unmap(pte) do { } while (0)
-#define pte_unmap_nested(pte) do { } while (0)
-
-struct mm_struct;
-extern pte_t *virt_to_pte(struct mm_struct *mm, unsigned long addr);
-
-#define update_mmu_cache(vma,address,pte) do ; while (0)
-
-/* Encode and de-code a swap entry */
-#define __swp_type(x)			(((x).val >> 4) & 0x3f)
-#define __swp_offset(x)			((x).val >> 11)
-
-#define __swp_entry(type, offset) \
-	((swp_entry_t) { ((type) << 4) | ((offset) << 11) })
-#define __pte_to_swp_entry(pte) \
-	((swp_entry_t) { pte_val(pte_mkuptodate(pte)) })
-#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
-
-#define kern_addr_valid(addr) (1)
-
-#include <asm-generic/pgtable.h>
-
-#endif
diff --git a/include/asm-um/poll.h b/include/asm-um/poll.h
deleted file mode 100644
index 1eb4e1b..0000000
--- a/include/asm-um/poll.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_POLL_H
-#define __UM_POLL_H
-
-#include "asm/arch/poll.h"
-
-#endif
diff --git a/include/asm-um/posix_types.h b/include/asm-um/posix_types.h
deleted file mode 100644
index 32fb419..0000000
--- a/include/asm-um/posix_types.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_POSIX_TYPES_H
-#define __UM_POSIX_TYPES_H
-
-#include "asm/arch/posix_types.h"
-
-#endif
diff --git a/include/asm-um/prctl.h b/include/asm-um/prctl.h
deleted file mode 100644
index 64b6d09..0000000
--- a/include/asm-um/prctl.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_PRCTL_H
-#define __UM_PRCTL_H
-
-#include "asm/arch/prctl.h"
-
-#endif
diff --git a/include/asm-um/processor-i386.h b/include/asm-um/processor-i386.h
deleted file mode 100644
index a2b7fe1..0000000
--- a/include/asm-um/processor-i386.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __UM_PROCESSOR_I386_H
-#define __UM_PROCESSOR_I386_H
-
-#include "linux/string.h"
-#include "asm/host_ldt.h"
-#include "asm/segment.h"
-
-extern int host_has_cmov;
-
-/* include faultinfo structure */
-#include "sysdep/faultinfo.h"
-
-struct uml_tls_struct {
-	struct user_desc tls;
-	unsigned flushed:1;
-	unsigned present:1;
-};
-
-struct arch_thread {
-	struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
-	unsigned long debugregs[8];
-	int debugregs_seq;
-	struct faultinfo faultinfo;
-};
-
-#define INIT_ARCH_THREAD { \
-	.tls_array  		= { [ 0 ... GDT_ENTRY_TLS_ENTRIES - 1 ] = \
-				    { .present = 0, .flushed = 0 } }, \
-	.debugregs  		= { [ 0 ... 7 ] = 0 }, \
-	.debugregs_seq		= 0, \
-	.faultinfo		= { 0, 0, 0 } \
-}
-
-static inline void arch_flush_thread(struct arch_thread *thread)
-{
-	/* Clear any TLS still hanging */
-	memset(&thread->tls_array, 0, sizeof(thread->tls_array));
-}
-
-static inline void arch_copy_thread(struct arch_thread *from,
-                                    struct arch_thread *to)
-{
-        memcpy(&to->tls_array, &from->tls_array, sizeof(from->tls_array));
-}
-
-#include "asm/arch/user.h"
-
-/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
-static inline void rep_nop(void)
-{
-	__asm__ __volatile__("rep;nop": : :"memory");
-}
-
-#define cpu_relax()	rep_nop()
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter"). Stolen
- * from asm-i386/processor.h
- */
-#define current_text_addr() \
-	({ void *pc; __asm__("movl $1f,%0\n1:":"=g" (pc)); pc; })
-
-#define ARCH_IS_STACKGROW(address) \
-       (address + 32 >= UPT_SP(&current->thread.regs.regs))
-
-#define KSTK_EIP(tsk) KSTK_REG(tsk, EIP)
-#define KSTK_ESP(tsk) KSTK_REG(tsk, UESP)
-#define KSTK_EBP(tsk) KSTK_REG(tsk, EBP)
-
-#include "asm/processor-generic.h"
-
-#endif
diff --git a/include/asm-um/processor-x86_64.h b/include/asm-um/processor-x86_64.h
deleted file mode 100644
index e509331..0000000
--- a/include/asm-um/processor-x86_64.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __UM_PROCESSOR_X86_64_H
-#define __UM_PROCESSOR_X86_64_H
-
-/* include faultinfo structure */
-#include "sysdep/faultinfo.h"
-
-struct arch_thread {
-        unsigned long debugregs[8];
-        int debugregs_seq;
-        unsigned long fs;
-        struct faultinfo faultinfo;
-};
-
-/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
-static inline void rep_nop(void)
-{
-	__asm__ __volatile__("rep;nop": : :"memory");
-}
-
-#define cpu_relax()   rep_nop()
-
-#define INIT_ARCH_THREAD { .debugregs  		= { [ 0 ... 7 ] = 0 }, \
-			   .debugregs_seq	= 0, \
-			   .fs			= 0, \
-			   .faultinfo		= { 0, 0, 0 } }
-
-static inline void arch_flush_thread(struct arch_thread *thread)
-{
-}
-
-static inline void arch_copy_thread(struct arch_thread *from,
-                                    struct arch_thread *to)
-{
-	to->fs = from->fs;
-}
-
-#include "asm/arch/user.h"
-
-#define current_text_addr() \
-	({ void *pc; __asm__("movq $1f,%0\n1:":"=g" (pc)); pc; })
-
-#define ARCH_IS_STACKGROW(address) \
-        (address + 128 >= UPT_SP(&current->thread.regs.regs))
-
-#define KSTK_EIP(tsk) KSTK_REG(tsk, RIP)
-#define KSTK_ESP(tsk) KSTK_REG(tsk, RSP)
-
-#include "asm/processor-generic.h"
-
-#endif
diff --git a/include/asm-um/ptrace-generic.h b/include/asm-um/ptrace-generic.h
deleted file mode 100644
index 3157497..0000000
--- a/include/asm-um/ptrace-generic.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* 
- * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __UM_PTRACE_GENERIC_H
-#define __UM_PTRACE_GENERIC_H
-
-#ifndef __ASSEMBLY__
-
-#include "asm/arch/ptrace-abi.h"
-#include <asm/user.h>
-#include "sysdep/ptrace.h"
-
-struct pt_regs {
-	struct uml_pt_regs regs;
-};
-
-#define EMPTY_REGS { .regs = EMPTY_UML_PT_REGS }
-
-#define PT_REGS_IP(r) UPT_IP(&(r)->regs)
-#define PT_REGS_SP(r) UPT_SP(&(r)->regs)
-
-#define PT_REG(r, reg) UPT_REG(&(r)->regs, reg)
-#define PT_REGS_SET(r, reg, val) UPT_SET(&(r)->regs, reg, val)
-
-#define PT_REGS_SET_SYSCALL_RETURN(r, res) \
-	UPT_SET_SYSCALL_RETURN(&(r)->regs, res)
-#define PT_REGS_RESTART_SYSCALL(r) UPT_RESTART_SYSCALL(&(r)->regs)
-
-#define PT_REGS_SYSCALL_NR(r) UPT_SYSCALL_NR(&(r)->regs)
-
-#define PT_REGS_SC(r) UPT_SC(&(r)->regs)
-
-#define instruction_pointer(regs) PT_REGS_IP(regs)
-
-struct task_struct;
-
-extern long subarch_ptrace(struct task_struct *child, long request, long addr,
-			   long data);
-extern unsigned long getreg(struct task_struct *child, int regno);
-extern int putreg(struct task_struct *child, int regno, unsigned long value);
-extern int get_fpregs(struct user_i387_struct __user *buf,
-		      struct task_struct *child);
-extern int set_fpregs(struct user_i387_struct __user *buf,
-		      struct task_struct *child);
-
-extern void show_regs(struct pt_regs *regs);
-
-extern int arch_copy_tls(struct task_struct *new);
-extern void clear_flushed_tls(struct task_struct *task);
-
-#endif
-
-#endif
diff --git a/include/asm-um/ptrace-i386.h b/include/asm-um/ptrace-i386.h
deleted file mode 100644
index b2d24c5e..0000000
--- a/include/asm-um/ptrace-i386.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* 
- * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __UM_PTRACE_I386_H
-#define __UM_PTRACE_I386_H
-
-#define HOST_AUDIT_ARCH AUDIT_ARCH_I386
-
-#include "linux/compiler.h"
-#include "asm/ptrace-generic.h"
-#include <asm/user.h>
-#include "sysdep/ptrace.h"
-
-#define PT_REGS_EAX(r) UPT_EAX(&(r)->regs)
-#define PT_REGS_EBX(r) UPT_EBX(&(r)->regs)
-#define PT_REGS_ECX(r) UPT_ECX(&(r)->regs)
-#define PT_REGS_EDX(r) UPT_EDX(&(r)->regs)
-#define PT_REGS_ESI(r) UPT_ESI(&(r)->regs)
-#define PT_REGS_EDI(r) UPT_EDI(&(r)->regs)
-#define PT_REGS_EBP(r) UPT_EBP(&(r)->regs)
-
-#define PT_REGS_CS(r) UPT_CS(&(r)->regs)
-#define PT_REGS_SS(r) UPT_SS(&(r)->regs)
-#define PT_REGS_DS(r) UPT_DS(&(r)->regs)
-#define PT_REGS_ES(r) UPT_ES(&(r)->regs)
-#define PT_REGS_FS(r) UPT_FS(&(r)->regs)
-#define PT_REGS_GS(r) UPT_GS(&(r)->regs)
-
-#define PT_REGS_EFLAGS(r) UPT_EFLAGS(&(r)->regs)
-
-#define PT_REGS_ORIG_SYSCALL(r) PT_REGS_EAX(r)
-#define PT_REGS_SYSCALL_RET(r) PT_REGS_EAX(r)
-#define PT_FIX_EXEC_STACK(sp) do ; while(0)
-
-/* Cope with a conditional i386 definition. */
-#undef profile_pc
-#define profile_pc(regs) PT_REGS_IP(regs)
-
-#define user_mode(r) UPT_IS_USER(&(r)->regs)
-
-/*
- * Forward declaration to avoid including sysdep/tls.h, which causes a
- * circular include, and compilation failures.
- */
-struct user_desc;
-
-extern int get_fpxregs(struct user_fxsr_struct __user *buf,
-		       struct task_struct *child);
-extern int set_fpxregs(struct user_fxsr_struct __user *buf,
-		       struct task_struct *tsk);
-
-extern int ptrace_get_thread_area(struct task_struct *child, int idx,
-                                  struct user_desc __user *user_desc);
-
-extern int ptrace_set_thread_area(struct task_struct *child, int idx,
-                                  struct user_desc __user *user_desc);
-
-#endif
diff --git a/include/asm-um/ptrace-x86_64.h b/include/asm-um/ptrace-x86_64.h
deleted file mode 100644
index 4c47535..0000000
--- a/include/asm-um/ptrace-x86_64.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __UM_PTRACE_X86_64_H
-#define __UM_PTRACE_X86_64_H
-
-#include "linux/compiler.h"
-#include "asm/errno.h"
-#include "asm/host_ldt.h"
-
-#define __FRAME_OFFSETS /* Needed to get the R* macros */
-#include "asm/ptrace-generic.h"
-
-#define HOST_AUDIT_ARCH AUDIT_ARCH_X86_64
-
-/* Also defined in sysdep/ptrace.h, so may already be defined. */
-#ifndef FS_BASE
-#define FS_BASE (21 * sizeof(unsigned long))
-#define GS_BASE (22 * sizeof(unsigned long))
-#define DS (23 * sizeof(unsigned long))
-#define ES (24 * sizeof(unsigned long))
-#define FS (25 * sizeof(unsigned long))
-#define GS (26 * sizeof(unsigned long))
-#endif
-
-#define PT_REGS_RBX(r) UPT_RBX(&(r)->regs)
-#define PT_REGS_RCX(r) UPT_RCX(&(r)->regs)
-#define PT_REGS_RDX(r) UPT_RDX(&(r)->regs)
-#define PT_REGS_RSI(r) UPT_RSI(&(r)->regs)
-#define PT_REGS_RDI(r) UPT_RDI(&(r)->regs)
-#define PT_REGS_RBP(r) UPT_RBP(&(r)->regs)
-#define PT_REGS_RAX(r) UPT_RAX(&(r)->regs)
-#define PT_REGS_R8(r) UPT_R8(&(r)->regs)
-#define PT_REGS_R9(r) UPT_R9(&(r)->regs)
-#define PT_REGS_R10(r) UPT_R10(&(r)->regs)
-#define PT_REGS_R11(r) UPT_R11(&(r)->regs)
-#define PT_REGS_R12(r) UPT_R12(&(r)->regs)
-#define PT_REGS_R13(r) UPT_R13(&(r)->regs)
-#define PT_REGS_R14(r) UPT_R14(&(r)->regs)
-#define PT_REGS_R15(r) UPT_R15(&(r)->regs)
-
-#define PT_REGS_FS(r) UPT_FS(&(r)->regs)
-#define PT_REGS_GS(r) UPT_GS(&(r)->regs)
-#define PT_REGS_DS(r) UPT_DS(&(r)->regs)
-#define PT_REGS_ES(r) UPT_ES(&(r)->regs)
-#define PT_REGS_SS(r) UPT_SS(&(r)->regs)
-#define PT_REGS_CS(r) UPT_CS(&(r)->regs)
-
-#define PT_REGS_ORIG_RAX(r) UPT_ORIG_RAX(&(r)->regs)
-#define PT_REGS_RIP(r) UPT_IP(&(r)->regs)
-#define PT_REGS_RSP(r) UPT_SP(&(r)->regs)
-
-#define PT_REGS_EFLAGS(r) UPT_EFLAGS(&(r)->regs)
-
-/* XXX */
-#define user_mode(r) UPT_IS_USER(&(r)->regs)
-#define PT_REGS_ORIG_SYSCALL(r) PT_REGS_RAX(r)
-#define PT_REGS_SYSCALL_RET(r) PT_REGS_RAX(r)
-
-#define PT_FIX_EXEC_STACK(sp) do ; while(0)
-
-#define profile_pc(regs) PT_REGS_IP(regs)
-
-static inline int ptrace_get_thread_area(struct task_struct *child, int idx,
-                                         struct user_desc __user *user_desc)
-{
-        return -ENOSYS;
-}
-
-static inline int ptrace_set_thread_area(struct task_struct *child, int idx,
-                                         struct user_desc __user *user_desc)
-{
-        return -ENOSYS;
-}
-
-extern long arch_prctl(struct task_struct *task, int code,
-		       unsigned long __user *addr);
-#endif
diff --git a/include/asm-um/resource.h b/include/asm-um/resource.h
deleted file mode 100644
index c9b0740..0000000
--- a/include/asm-um/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_RESOURCE_H
-#define __UM_RESOURCE_H
-
-#include "asm/arch/resource.h"
-
-#endif
diff --git a/include/asm-um/rwlock.h b/include/asm-um/rwlock.h
deleted file mode 100644
index ff383aa..0000000
--- a/include/asm-um/rwlock.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_RWLOCK_H
-#define __UM_RWLOCK_H
-
-#include "asm/arch/rwlock.h"
-
-#endif
diff --git a/include/asm-um/rwsem.h b/include/asm-um/rwsem.h
deleted file mode 100644
index b5fc449..0000000
--- a/include/asm-um/rwsem.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_RWSEM_H__
-#define __UM_RWSEM_H__
-
-#include "asm/arch/rwsem.h"
-
-#endif
diff --git a/include/asm-um/scatterlist.h b/include/asm-um/scatterlist.h
deleted file mode 100644
index e92016a..0000000
--- a/include/asm-um/scatterlist.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_SCATTERLIST_H
-#define __UM_SCATTERLIST_H
-
-#include "asm/arch/scatterlist.h"
-
-#endif
diff --git a/include/asm-um/sembuf.h b/include/asm-um/sembuf.h
deleted file mode 100644
index 1ae82c1..0000000
--- a/include/asm-um/sembuf.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_SEMBUF_H
-#define __UM_SEMBUF_H
-
-#include "asm/arch/sembuf.h"
-
-#endif
diff --git a/include/asm-um/serial.h b/include/asm-um/serial.h
deleted file mode 100644
index 61ad07c..0000000
--- a/include/asm-um/serial.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_SERIAL_H
-#define __UM_SERIAL_H
-
-#include "asm/arch/serial.h"
-
-#endif
diff --git a/include/asm-um/shmbuf.h b/include/asm-um/shmbuf.h
deleted file mode 100644
index 9684d4a..0000000
--- a/include/asm-um/shmbuf.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_SHMBUF_H
-#define __UM_SHMBUF_H
-
-#include "asm/arch/shmbuf.h"
-
-#endif
diff --git a/include/asm-um/shmparam.h b/include/asm-um/shmparam.h
deleted file mode 100644
index 124c001..0000000
--- a/include/asm-um/shmparam.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_SHMPARAM_H
-#define __UM_SHMPARAM_H
-
-#include "asm/arch/shmparam.h"
-
-#endif
diff --git a/include/asm-um/sigcontext-generic.h b/include/asm-um/sigcontext-generic.h
deleted file mode 100644
index 1645870..0000000
--- a/include/asm-um/sigcontext-generic.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_SIGCONTEXT_GENERIC_H
-#define __UM_SIGCONTEXT_GENERIC_H
-
-#include "asm/arch/sigcontext.h"
-
-#endif
diff --git a/include/asm-um/sigcontext-i386.h b/include/asm-um/sigcontext-i386.h
deleted file mode 100644
index b88333f..0000000
--- a/include/asm-um/sigcontext-i386.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_SIGCONTEXT_I386_H
-#define __UM_SIGCONTEXT_I386_H
-
-#include "asm/sigcontext-generic.h"
-
-#endif
diff --git a/include/asm-um/sigcontext-ppc.h b/include/asm-um/sigcontext-ppc.h
deleted file mode 100644
index 2467f20..0000000
--- a/include/asm-um/sigcontext-ppc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __UM_SIGCONTEXT_PPC_H
-#define __UM_SIGCONTEXT_PPC_H
-
-#define pt_regs sys_pt_regs
-
-#include "asm/sigcontext-generic.h"
-
-#undef pt_regs
-
-#endif
diff --git a/include/asm-um/sigcontext-x86_64.h b/include/asm-um/sigcontext-x86_64.h
deleted file mode 100644
index b600e0b..0000000
--- a/include/asm-um/sigcontext-x86_64.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __UM_SIGCONTEXT_X86_64_H
-#define __UM_SIGCONTEXT_X86_64_H
-
-#include "asm/sigcontext-generic.h"
-
-#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/include/asm-um/siginfo.h b/include/asm-um/siginfo.h
deleted file mode 100644
index bec6124..0000000
--- a/include/asm-um/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_SIGINFO_H
-#define __UM_SIGINFO_H
-
-#include "asm/arch/siginfo.h"
-
-#endif
diff --git a/include/asm-um/signal.h b/include/asm-um/signal.h
deleted file mode 100644
index 52ed92c..0000000
--- a/include/asm-um/signal.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* 
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __UM_SIGNAL_H
-#define __UM_SIGNAL_H
-
-/* Need to kill the do_signal() declaration in the i386 signal.h */
-
-#define do_signal do_signal_renamed
-#include "asm/arch/signal.h"
-#undef do_signal
-#undef ptrace_signal_deliver
-
-#define ptrace_signal_deliver(regs, cookie) do {} while(0)
-
-#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/include/asm-um/socket.h b/include/asm-um/socket.h
deleted file mode 100644
index 67886e4..0000000
--- a/include/asm-um/socket.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_SOCKET_H
-#define __UM_SOCKET_H
-
-#include "asm/arch/socket.h"
-
-#endif
diff --git a/include/asm-um/sockios.h b/include/asm-um/sockios.h
deleted file mode 100644
index 93ee1c5..0000000
--- a/include/asm-um/sockios.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_SOCKIOS_H
-#define __UM_SOCKIOS_H
-
-#include "asm/arch/sockios.h"
-
-#endif
diff --git a/include/asm-um/spinlock.h b/include/asm-um/spinlock.h
deleted file mode 100644
index f18c828..0000000
--- a/include/asm-um/spinlock.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_SPINLOCK_H
-#define __UM_SPINLOCK_H
-
-#include "asm/arch/spinlock.h"
-
-#endif
diff --git a/include/asm-um/spinlock_types.h b/include/asm-um/spinlock_types.h
deleted file mode 100644
index e5a9429..0000000
--- a/include/asm-um/spinlock_types.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_SPINLOCK_TYPES_H
-#define __UM_SPINLOCK_TYPES_H
-
-#include "asm/arch/spinlock_types.h"
-
-#endif
diff --git a/include/asm-um/stat.h b/include/asm-um/stat.h
deleted file mode 100644
index 83ed85a..0000000
--- a/include/asm-um/stat.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_STAT_H
-#define __UM_STAT_H
-
-#include "asm/arch/stat.h"
-
-#endif
diff --git a/include/asm-um/statfs.h b/include/asm-um/statfs.h
deleted file mode 100644
index ba6fb53..0000000
--- a/include/asm-um/statfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _UM_STATFS_H
-#define _UM_STATFS_H
-
-#include "asm/arch/statfs.h"
-
-#endif
diff --git a/include/asm-um/string.h b/include/asm-um/string.h
deleted file mode 100644
index 9a0571f6..0000000
--- a/include/asm-um/string.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __UM_STRING_H
-#define __UM_STRING_H
-
-#include "asm/arch/string.h"
-#include "asm/archparam.h"
-
-#endif
diff --git a/include/asm-um/system-generic.h b/include/asm-um/system-generic.h
deleted file mode 100644
index 5bcfa35..0000000
--- a/include/asm-um/system-generic.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef __UM_SYSTEM_GENERIC_H
-#define __UM_SYSTEM_GENERIC_H
-
-#include "asm/arch/system.h"
-
-#undef switch_to
-#undef local_irq_save
-#undef local_irq_restore
-#undef local_irq_disable
-#undef local_irq_enable
-#undef local_save_flags
-#undef local_irq_restore
-#undef local_irq_enable
-#undef local_irq_disable
-#undef local_irq_save
-#undef irqs_disabled
-
-extern void *switch_to(void *prev, void *next, void *last);
-
-extern int get_signals(void);
-extern int set_signals(int enable);
-extern int get_signals(void);
-extern void block_signals(void);
-extern void unblock_signals(void);
-
-#define local_save_flags(flags) do { typecheck(unsigned long, flags); \
-				     (flags) = get_signals(); } while(0)
-#define local_irq_restore(flags) do { typecheck(unsigned long, flags); \
-				      set_signals(flags); } while(0)
-
-#define local_irq_save(flags) do { local_save_flags(flags); \
-                                   local_irq_disable(); } while(0)
-
-#define local_irq_enable() unblock_signals()
-#define local_irq_disable() block_signals()
-
-#define irqs_disabled()                 \
-({                                      \
-        unsigned long flags;            \
-        local_save_flags(flags);        \
-        (flags == 0);                   \
-})
-
-extern void *_switch_to(void *prev, void *next, void *last);
-#define switch_to(prev, next, last) prev = _switch_to(prev, next, last)
-
-#endif
diff --git a/include/asm-um/system-i386.h b/include/asm-um/system-i386.h
deleted file mode 100644
index c436263..0000000
--- a/include/asm-um/system-i386.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_SYSTEM_I386_H
-#define __UM_SYSTEM_I386_H
-
-#include "asm/system-generic.h"
-    
-#endif
diff --git a/include/asm-um/system-ppc.h b/include/asm-um/system-ppc.h
deleted file mode 100644
index 17cde66..0000000
--- a/include/asm-um/system-ppc.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __UM_SYSTEM_PPC_H
-#define __UM_SYSTEM_PPC_H
-
-#define _switch_to _ppc_switch_to
-
-#include "asm/arch/system.h"
-
-#undef _switch_to
- 
-#include "asm/system-generic.h"
-
-#endif
diff --git a/include/asm-um/system-x86_64.h b/include/asm-um/system-x86_64.h
deleted file mode 100644
index e1b61b5..0000000
--- a/include/asm-um/system-x86_64.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __UM_SYSTEM_X86_64_H
-#define __UM_SYSTEM_X86_64_H
-
-#include "asm/system-generic.h"
-
-#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/include/asm-um/termbits.h b/include/asm-um/termbits.h
deleted file mode 100644
index 5739c60..0000000
--- a/include/asm-um/termbits.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_TERMBITS_H
-#define __UM_TERMBITS_H
-
-#include "asm/arch/termbits.h"
-
-#endif
diff --git a/include/asm-um/termios.h b/include/asm-um/termios.h
deleted file mode 100644
index d9f97b3..0000000
--- a/include/asm-um/termios.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_TERMIOS_H
-#define __UM_TERMIOS_H
-
-#include "asm/arch/termios.h"
-
-#endif
diff --git a/include/asm-um/types.h b/include/asm-um/types.h
deleted file mode 100644
index 816e959..0000000
--- a/include/asm-um/types.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_TYPES_H
-#define __UM_TYPES_H
-
-#include "asm/arch/types.h"
-
-#endif
diff --git a/include/asm-um/ucontext.h b/include/asm-um/ucontext.h
deleted file mode 100644
index 5c96c0e..0000000
--- a/include/asm-um/ucontext.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_UM_UCONTEXT_H
-#define _ASM_UM_UCONTEXT_H
-
-#include "asm/arch/ucontext.h"
-
-#endif
diff --git a/include/asm-um/unaligned.h b/include/asm-um/unaligned.h
deleted file mode 100644
index a471969..0000000
--- a/include/asm-um/unaligned.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_UM_UNALIGNED_H
-#define _ASM_UM_UNALIGNED_H
-
-#include "asm/arch/unaligned.h"
-
-#endif /* _ASM_UM_UNALIGNED_H */
diff --git a/include/asm-um/unistd.h b/include/asm-um/unistd.h
deleted file mode 100644
index 38bd9d94..0000000
--- a/include/asm-um/unistd.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* 
- * Copyright (C) 2000 - 2004  Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef _UM_UNISTD_H_
-#define _UM_UNISTD_H_
-
-#include <linux/syscalls.h>
-#include "linux/resource.h"
-#include "asm/uaccess.h"
-
-extern int um_execve(const char *file, char *const argv[], char *const env[]);
-
-#ifdef __KERNEL__
-/* We get __ARCH_WANT_OLD_STAT and __ARCH_WANT_STAT64 from the base arch */
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-#endif
-
-#include "asm/arch/unistd.h"
-
-#endif /* _UM_UNISTD_H_*/
diff --git a/include/asm-um/user.h b/include/asm-um/user.h
deleted file mode 100644
index aae414e..0000000
--- a/include/asm-um/user.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_USER_H
-#define __UM_USER_H
-
-#include "asm/arch/user.h"
-
-#endif
diff --git a/include/asm-um/vga.h b/include/asm-um/vga.h
deleted file mode 100644
index 903a592..0000000
--- a/include/asm-um/vga.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_VGA_H
-#define __UM_VGA_H
-
-#include "asm/arch/vga.h"
-
-#endif
diff --git a/include/asm-um/vm86.h b/include/asm-um/vm86.h
deleted file mode 100644
index 7801f82..0000000
--- a/include/asm-um/vm86.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_VM86_H
-#define __UM_VM86_H
-
-#include "asm/arch/vm86.h"
-
-#endif
diff --git a/include/asm-x86/a.out-core.h b/include/asm-x86/a.out-core.h
deleted file mode 100644
index f570576..0000000
--- a/include/asm-x86/a.out-core.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* a.out coredump register dumper
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef ASM_X86__A_OUT_CORE_H
-#define ASM_X86__A_OUT_CORE_H
-
-#ifdef __KERNEL__
-#ifdef CONFIG_X86_32
-
-#include <linux/user.h>
-#include <linux/elfcore.h>
-
-/*
- * fill in the user structure for an a.out core dump
- */
-static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
-{
-	u16 gs;
-
-/* changed the size calculations - should hopefully work better. lbt */
-	dump->magic = CMAGIC;
-	dump->start_code = 0;
-	dump->start_stack = regs->sp & ~(PAGE_SIZE - 1);
-	dump->u_tsize = ((unsigned long)current->mm->end_code) >> PAGE_SHIFT;
-	dump->u_dsize = ((unsigned long)(current->mm->brk + (PAGE_SIZE - 1)))
-			>> PAGE_SHIFT;
-	dump->u_dsize -= dump->u_tsize;
-	dump->u_ssize = 0;
-	dump->u_debugreg[0] = current->thread.debugreg0;
-	dump->u_debugreg[1] = current->thread.debugreg1;
-	dump->u_debugreg[2] = current->thread.debugreg2;
-	dump->u_debugreg[3] = current->thread.debugreg3;
-	dump->u_debugreg[4] = 0;
-	dump->u_debugreg[5] = 0;
-	dump->u_debugreg[6] = current->thread.debugreg6;
-	dump->u_debugreg[7] = current->thread.debugreg7;
-
-	if (dump->start_stack < TASK_SIZE)
-		dump->u_ssize = ((unsigned long)(TASK_SIZE - dump->start_stack))
-				>> PAGE_SHIFT;
-
-	dump->regs.bx = regs->bx;
-	dump->regs.cx = regs->cx;
-	dump->regs.dx = regs->dx;
-	dump->regs.si = regs->si;
-	dump->regs.di = regs->di;
-	dump->regs.bp = regs->bp;
-	dump->regs.ax = regs->ax;
-	dump->regs.ds = (u16)regs->ds;
-	dump->regs.es = (u16)regs->es;
-	dump->regs.fs = (u16)regs->fs;
-	savesegment(gs, gs);
-	dump->regs.orig_ax = regs->orig_ax;
-	dump->regs.ip = regs->ip;
-	dump->regs.cs = (u16)regs->cs;
-	dump->regs.flags = regs->flags;
-	dump->regs.sp = regs->sp;
-	dump->regs.ss = (u16)regs->ss;
-
-	dump->u_fpvalid = dump_fpu(regs, &dump->i387);
-}
-
-#endif /* CONFIG_X86_32 */
-#endif /* __KERNEL__ */
-#endif /* ASM_X86__A_OUT_CORE_H */
diff --git a/include/asm-x86/a.out.h b/include/asm-x86/a.out.h
deleted file mode 100644
index 0948748..0000000
--- a/include/asm-x86/a.out.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef ASM_X86__A_OUT_H
-#define ASM_X86__A_OUT_H
-
-struct exec
-{
-	unsigned int a_info;	/* Use macros N_MAGIC, etc for access */
-	unsigned a_text;	/* length of text, in bytes */
-	unsigned a_data;	/* length of data, in bytes */
-	unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
-	unsigned a_syms;	/* length of symbol table data in file, in bytes */
-	unsigned a_entry;	/* start address */
-	unsigned a_trsize;	/* length of relocation info for text, in bytes */
-	unsigned a_drsize;	/* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#endif /* ASM_X86__A_OUT_H */
diff --git a/include/asm-x86/acpi.h b/include/asm-x86/acpi.h
deleted file mode 100644
index 392e173..0000000
--- a/include/asm-x86/acpi.h
+++ /dev/null
@@ -1,178 +0,0 @@
-#ifndef ASM_X86__ACPI_H
-#define ASM_X86__ACPI_H
-
-/*
- *  Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
- *  Copyright (C) 2001 Patrick Mochel <mochel@osdl.org>
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-#include <acpi/pdc_intel.h>
-
-#include <asm/numa.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/mpspec.h>
-
-#define COMPILER_DEPENDENT_INT64   long long
-#define COMPILER_DEPENDENT_UINT64  unsigned long long
-
-/*
- * Calling conventions:
- *
- * ACPI_SYSTEM_XFACE        - Interfaces to host OS (handlers, threads)
- * ACPI_EXTERNAL_XFACE      - External ACPI interfaces
- * ACPI_INTERNAL_XFACE      - Internal ACPI interfaces
- * ACPI_INTERNAL_VAR_XFACE  - Internal variable-parameter list interfaces
- */
-#define ACPI_SYSTEM_XFACE
-#define ACPI_EXTERNAL_XFACE
-#define ACPI_INTERNAL_XFACE
-#define ACPI_INTERNAL_VAR_XFACE
-
-/* Asm macros */
-
-#define ACPI_ASM_MACROS
-#define BREAKPOINT3
-#define ACPI_DISABLE_IRQS() local_irq_disable()
-#define ACPI_ENABLE_IRQS()  local_irq_enable()
-#define ACPI_FLUSH_CPU_CACHE()	wbinvd()
-
-int __acpi_acquire_global_lock(unsigned int *lock);
-int __acpi_release_global_lock(unsigned int *lock);
-
-#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \
-	((Acq) = __acpi_acquire_global_lock(&facs->global_lock))
-
-#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \
-	((Acq) = __acpi_release_global_lock(&facs->global_lock))
-
-/*
- * Math helper asm macros
- */
-#define ACPI_DIV_64_BY_32(n_hi, n_lo, d32, q32, r32) \
-	asm("divl %2;"				     \
-	    : "=a"(q32), "=d"(r32)		     \
-	    : "r"(d32),				     \
-	     "0"(n_lo), "1"(n_hi))
-
-
-#define ACPI_SHIFT_RIGHT_64(n_hi, n_lo) \
-	asm("shrl   $1,%2	;"	\
-	    "rcrl   $1,%3;"		\
-	    : "=r"(n_hi), "=r"(n_lo)	\
-	    : "0"(n_hi), "1"(n_lo))
-
-#ifdef CONFIG_ACPI
-extern int acpi_lapic;
-extern int acpi_ioapic;
-extern int acpi_noirq;
-extern int acpi_strict;
-extern int acpi_disabled;
-extern int acpi_ht;
-extern int acpi_pci_disabled;
-extern int acpi_skip_timer_override;
-extern int acpi_use_timer_override;
-
-extern u8 acpi_sci_flags;
-extern int acpi_sci_override_gsi;
-void acpi_pic_sci_set_trigger(unsigned int, u16);
-
-static inline void disable_acpi(void)
-{
-	acpi_disabled = 1;
-	acpi_ht = 0;
-	acpi_pci_disabled = 1;
-	acpi_noirq = 1;
-}
-
-/* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */
-#define FIX_ACPI_PAGES 4
-
-extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
-
-static inline void acpi_noirq_set(void) { acpi_noirq = 1; }
-static inline void acpi_disable_pci(void)
-{
-	acpi_pci_disabled = 1;
-	acpi_noirq_set();
-}
-extern int acpi_irq_balance_set(char *str);
-
-/* routines for saving/restoring kernel state */
-extern int acpi_save_state_mem(void);
-extern void acpi_restore_state_mem(void);
-
-extern unsigned long acpi_wakeup_address;
-
-/* early initialization routine */
-extern void acpi_reserve_bootmem(void);
-
-/*
- * Check if the CPU can handle C2 and deeper
- */
-static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
-{
-	/*
-	 * Early models (<=5) of AMD Opterons are not supposed to go into
-	 * C2 state.
-	 *
-	 * Steppings 0x0A and later are good
-	 */
-	if (boot_cpu_data.x86 == 0x0F &&
-	    boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
-	    boot_cpu_data.x86_model <= 0x05 &&
-	    boot_cpu_data.x86_mask < 0x0A)
-		return 1;
-	else if (boot_cpu_has(X86_FEATURE_AMDC1E))
-		return 1;
-	else
-		return max_cstate;
-}
-
-#else /* !CONFIG_ACPI */
-
-#define acpi_lapic 0
-#define acpi_ioapic 0
-static inline void acpi_noirq_set(void) { }
-static inline void acpi_disable_pci(void) { }
-static inline void disable_acpi(void) { }
-
-#endif /* !CONFIG_ACPI */
-
-#define ARCH_HAS_POWER_INIT	1
-
-struct bootnode;
-
-#ifdef CONFIG_ACPI_NUMA
-extern int acpi_numa;
-extern int acpi_scan_nodes(unsigned long start, unsigned long end);
-#define NR_NODE_MEMBLKS (MAX_NUMNODES*2)
-extern void acpi_fake_nodes(const struct bootnode *fake_nodes,
-				   int num_nodes);
-#else
-static inline void acpi_fake_nodes(const struct bootnode *fake_nodes,
-				   int num_nodes)
-{
-}
-#endif
-
-#define acpi_unlazy_tlb(x)	leave_mm(x)
-
-#endif /* ASM_X86__ACPI_H */
diff --git a/include/asm-x86/agp.h b/include/asm-x86/agp.h
deleted file mode 100644
index 3617fd4..0000000
--- a/include/asm-x86/agp.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef ASM_X86__AGP_H
-#define ASM_X86__AGP_H
-
-#include <asm/pgtable.h>
-#include <asm/cacheflush.h>
-
-/*
- * Functions to keep the agpgart mappings coherent with the MMU. The
- * GART gives the CPU a physical alias of pages in memory. The alias
- * region is mapped uncacheable. Make sure there are no conflicting
- * mappings with different cachability attributes for the same
- * page. This avoids data corruption on some CPUs.
- */
-
-#define map_page_into_agp(page) set_pages_uc(page, 1)
-#define unmap_page_from_agp(page) set_pages_wb(page, 1)
-
-/*
- * Could use CLFLUSH here if the cpu supports it. But then it would
- * need to be called for each cacheline of the whole page so it may
- * not be worth it. Would need a page for it.
- */
-#define flush_agp_cache() wbinvd()
-
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
-/* GATT allocation. Returns/accepts GATT kernel virtual address. */
-#define alloc_gatt_pages(order)		\
-	((char *)__get_free_pages(GFP_KERNEL, (order)))
-#define free_gatt_pages(table, order)	\
-	free_pages((unsigned long)(table), (order))
-
-#endif /* ASM_X86__AGP_H */
diff --git a/include/asm-x86/alternative.h b/include/asm-x86/alternative.h
deleted file mode 100644
index 22d3c98..0000000
--- a/include/asm-x86/alternative.h
+++ /dev/null
@@ -1,183 +0,0 @@
-#ifndef ASM_X86__ALTERNATIVE_H
-#define ASM_X86__ALTERNATIVE_H
-
-#include <linux/types.h>
-#include <linux/stddef.h>
-#include <asm/asm.h>
-
-/*
- * Alternative inline assembly for SMP.
- *
- * The LOCK_PREFIX macro defined here replaces the LOCK and
- * LOCK_PREFIX macros used everywhere in the source tree.
- *
- * SMP alternatives use the same data structures as the other
- * alternatives and the X86_FEATURE_UP flag to indicate the case of a
- * UP system running a SMP kernel.  The existing apply_alternatives()
- * works fine for patching a SMP kernel for UP.
- *
- * The SMP alternative tables can be kept after boot and contain both
- * UP and SMP versions of the instructions to allow switching back to
- * SMP at runtime, when hotplugging in a new CPU, which is especially
- * useful in virtualized environments.
- *
- * The very common lock prefix is handled as special case in a
- * separate table which is a pure address list without replacement ptr
- * and size information.  That keeps the table sizes small.
- */
-
-#ifdef CONFIG_SMP
-#define LOCK_PREFIX \
-		".section .smp_locks,\"a\"\n"	\
-		_ASM_ALIGN "\n"			\
-		_ASM_PTR "661f\n" /* address */	\
-		".previous\n"			\
-		"661:\n\tlock; "
-
-#else /* ! CONFIG_SMP */
-#define LOCK_PREFIX ""
-#endif
-
-/* This must be included *after* the definition of LOCK_PREFIX */
-#include <asm/cpufeature.h>
-
-struct alt_instr {
-	u8 *instr;		/* original instruction */
-	u8 *replacement;
-	u8  cpuid;		/* cpuid bit set for replacement */
-	u8  instrlen;		/* length of original instruction */
-	u8  replacementlen;	/* length of new instruction, <= instrlen */
-	u8  pad1;
-#ifdef CONFIG_X86_64
-	u32 pad2;
-#endif
-};
-
-extern void alternative_instructions(void);
-extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
-
-struct module;
-
-#ifdef CONFIG_SMP
-extern void alternatives_smp_module_add(struct module *mod, char *name,
-					void *locks, void *locks_end,
-					void *text, void *text_end);
-extern void alternatives_smp_module_del(struct module *mod);
-extern void alternatives_smp_switch(int smp);
-#else
-static inline void alternatives_smp_module_add(struct module *mod, char *name,
-					       void *locks, void *locks_end,
-					       void *text, void *text_end) {}
-static inline void alternatives_smp_module_del(struct module *mod) {}
-static inline void alternatives_smp_switch(int smp) {}
-#endif	/* CONFIG_SMP */
-
-const unsigned char *const *find_nop_table(void);
-
-/*
- * Alternative instructions for different CPU types or capabilities.
- *
- * This allows to use optimized instructions even on generic binary
- * kernels.
- *
- * length of oldinstr must be longer or equal the length of newinstr
- * It can be padded with nops as needed.
- *
- * For non barrier like inlines please define new variants
- * without volatile and memory clobber.
- */
-#define alternative(oldinstr, newinstr, feature)			\
-	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
-		      ".section .altinstructions,\"a\"\n"		\
-		      _ASM_ALIGN "\n"					\
-		      _ASM_PTR "661b\n"		/* label */		\
-		      _ASM_PTR "663f\n"		/* new instruction */	\
-		      "	 .byte %c0\n"		/* feature bit */	\
-		      "	 .byte 662b-661b\n"	/* sourcelen */		\
-		      "	 .byte 664f-663f\n"	/* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .altinstr_replacement,\"ax\"\n"		\
-		      "663:\n\t" newinstr "\n664:\n"  /* replacement */	\
-		      ".previous" :: "i" (feature) : "memory")
-
-/*
- * Alternative inline assembly with input.
- *
- * Pecularities:
- * No memory clobber here.
- * Argument numbers start with 1.
- * Best is to use constraints that are fixed size (like (%1) ... "r")
- * If you use variable sized constraints like "m" or "g" in the
- * replacement make sure to pad to the worst case length.
- */
-#define alternative_input(oldinstr, newinstr, feature, input...)	\
-	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
-		      ".section .altinstructions,\"a\"\n"		\
-		      _ASM_ALIGN "\n"					\
-		      _ASM_PTR "661b\n"		/* label */		\
-		      _ASM_PTR "663f\n"		/* new instruction */	\
-		      "	 .byte %c0\n"		/* feature bit */	\
-		      "	 .byte 662b-661b\n"	/* sourcelen */		\
-		      "	 .byte 664f-663f\n"	/* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .altinstr_replacement,\"ax\"\n"		\
-		      "663:\n\t" newinstr "\n664:\n"  /* replacement */	\
-		      ".previous" :: "i" (feature), ##input)
-
-/* Like alternative_input, but with a single output argument */
-#define alternative_io(oldinstr, newinstr, feature, output, input...)	\
-	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
-		      ".section .altinstructions,\"a\"\n"		\
-		      _ASM_ALIGN "\n"					\
-		      _ASM_PTR "661b\n"		/* label */		\
-		      _ASM_PTR "663f\n"		/* new instruction */	\
-		      "	 .byte %c[feat]\n"	/* feature bit */	\
-		      "	 .byte 662b-661b\n"	/* sourcelen */		\
-		      "	 .byte 664f-663f\n"	/* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .altinstr_replacement,\"ax\"\n"		\
-		      "663:\n\t" newinstr "\n664:\n"  /* replacement */ \
-		      ".previous" : output : [feat] "i" (feature), ##input)
-
-/*
- * use this macro(s) if you need more than one output parameter
- * in alternative_io
- */
-#define ASM_OUTPUT2(a, b) a, b
-
-struct paravirt_patch_site;
-#ifdef CONFIG_PARAVIRT
-void apply_paravirt(struct paravirt_patch_site *start,
-		    struct paravirt_patch_site *end);
-#else
-static inline void apply_paravirt(struct paravirt_patch_site *start,
-				  struct paravirt_patch_site *end)
-{}
-#define __parainstructions	NULL
-#define __parainstructions_end	NULL
-#endif
-
-extern void add_nops(void *insns, unsigned int len);
-
-/*
- * Clear and restore the kernel write-protection flag on the local CPU.
- * Allows the kernel to edit read-only pages.
- * Side-effect: any interrupt handler running between save and restore will have
- * the ability to write to read-only pages.
- *
- * Warning:
- * Code patching in the UP case is safe if NMIs and MCE handlers are stopped and
- * no thread can be preempted in the instructions being modified (no iret to an
- * invalid instruction possible) or if the instructions are changed from a
- * consistent state to another consistent state atomically.
- * More care must be taken when modifying code in the SMP case because of
- * Intel's errata.
- * On the local CPU you need to be protected again NMI or MCE handlers seeing an
- * inconsistent instruction while you patch.
- * The _early version expects the memory to already be RW.
- */
-
-extern void *text_poke(void *addr, const void *opcode, size_t len);
-extern void *text_poke_early(void *addr, const void *opcode, size_t len);
-
-#endif /* ASM_X86__ALTERNATIVE_H */
diff --git a/include/asm-x86/amd_iommu.h b/include/asm-x86/amd_iommu.h
deleted file mode 100644
index 041d0db..0000000
--- a/include/asm-x86/amd_iommu.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
- * Author: Joerg Roedel <joerg.roedel@amd.com>
- *         Leo Duran <leo.duran@amd.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef ASM_X86__AMD_IOMMU_H
-#define ASM_X86__AMD_IOMMU_H
-
-#include <linux/irqreturn.h>
-
-#ifdef CONFIG_AMD_IOMMU
-extern int amd_iommu_init(void);
-extern int amd_iommu_init_dma_ops(void);
-extern void amd_iommu_detect(void);
-extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
-#else
-static inline int amd_iommu_init(void) { return -ENODEV; }
-static inline void amd_iommu_detect(void) { }
-#endif
-
-#endif /* ASM_X86__AMD_IOMMU_H */
diff --git a/include/asm-x86/amd_iommu_types.h b/include/asm-x86/amd_iommu_types.h
deleted file mode 100644
index b308586..0000000
--- a/include/asm-x86/amd_iommu_types.h
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
- * Author: Joerg Roedel <joerg.roedel@amd.com>
- *         Leo Duran <leo.duran@amd.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef ASM_X86__AMD_IOMMU_TYPES_H
-#define ASM_X86__AMD_IOMMU_TYPES_H
-
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-
-/*
- * some size calculation constants
- */
-#define DEV_TABLE_ENTRY_SIZE		32
-#define ALIAS_TABLE_ENTRY_SIZE		2
-#define RLOOKUP_TABLE_ENTRY_SIZE	(sizeof(void *))
-
-/* Length of the MMIO region for the AMD IOMMU */
-#define MMIO_REGION_LENGTH       0x4000
-
-/* Capability offsets used by the driver */
-#define MMIO_CAP_HDR_OFFSET	0x00
-#define MMIO_RANGE_OFFSET	0x0c
-#define MMIO_MISC_OFFSET	0x10
-
-/* Masks, shifts and macros to parse the device range capability */
-#define MMIO_RANGE_LD_MASK	0xff000000
-#define MMIO_RANGE_FD_MASK	0x00ff0000
-#define MMIO_RANGE_BUS_MASK	0x0000ff00
-#define MMIO_RANGE_LD_SHIFT	24
-#define MMIO_RANGE_FD_SHIFT	16
-#define MMIO_RANGE_BUS_SHIFT	8
-#define MMIO_GET_LD(x)  (((x) & MMIO_RANGE_LD_MASK) >> MMIO_RANGE_LD_SHIFT)
-#define MMIO_GET_FD(x)  (((x) & MMIO_RANGE_FD_MASK) >> MMIO_RANGE_FD_SHIFT)
-#define MMIO_GET_BUS(x) (((x) & MMIO_RANGE_BUS_MASK) >> MMIO_RANGE_BUS_SHIFT)
-#define MMIO_MSI_NUM(x)	((x) & 0x1f)
-
-/* Flag masks for the AMD IOMMU exclusion range */
-#define MMIO_EXCL_ENABLE_MASK 0x01ULL
-#define MMIO_EXCL_ALLOW_MASK  0x02ULL
-
-/* Used offsets into the MMIO space */
-#define MMIO_DEV_TABLE_OFFSET   0x0000
-#define MMIO_CMD_BUF_OFFSET     0x0008
-#define MMIO_EVT_BUF_OFFSET     0x0010
-#define MMIO_CONTROL_OFFSET     0x0018
-#define MMIO_EXCL_BASE_OFFSET   0x0020
-#define MMIO_EXCL_LIMIT_OFFSET  0x0028
-#define MMIO_CMD_HEAD_OFFSET	0x2000
-#define MMIO_CMD_TAIL_OFFSET	0x2008
-#define MMIO_EVT_HEAD_OFFSET	0x2010
-#define MMIO_EVT_TAIL_OFFSET	0x2018
-#define MMIO_STATUS_OFFSET	0x2020
-
-/* MMIO status bits */
-#define MMIO_STATUS_COM_WAIT_INT_MASK	0x04
-
-/* event logging constants */
-#define EVENT_ENTRY_SIZE	0x10
-#define EVENT_TYPE_SHIFT	28
-#define EVENT_TYPE_MASK		0xf
-#define EVENT_TYPE_ILL_DEV	0x1
-#define EVENT_TYPE_IO_FAULT	0x2
-#define EVENT_TYPE_DEV_TAB_ERR	0x3
-#define EVENT_TYPE_PAGE_TAB_ERR	0x4
-#define EVENT_TYPE_ILL_CMD	0x5
-#define EVENT_TYPE_CMD_HARD_ERR	0x6
-#define EVENT_TYPE_IOTLB_INV_TO	0x7
-#define EVENT_TYPE_INV_DEV_REQ	0x8
-#define EVENT_DEVID_MASK	0xffff
-#define EVENT_DEVID_SHIFT	0
-#define EVENT_DOMID_MASK	0xffff
-#define EVENT_DOMID_SHIFT	0
-#define EVENT_FLAGS_MASK	0xfff
-#define EVENT_FLAGS_SHIFT	0x10
-
-/* feature control bits */
-#define CONTROL_IOMMU_EN        0x00ULL
-#define CONTROL_HT_TUN_EN       0x01ULL
-#define CONTROL_EVT_LOG_EN      0x02ULL
-#define CONTROL_EVT_INT_EN      0x03ULL
-#define CONTROL_COMWAIT_EN      0x04ULL
-#define CONTROL_PASSPW_EN       0x08ULL
-#define CONTROL_RESPASSPW_EN    0x09ULL
-#define CONTROL_COHERENT_EN     0x0aULL
-#define CONTROL_ISOC_EN         0x0bULL
-#define CONTROL_CMDBUF_EN       0x0cULL
-#define CONTROL_PPFLOG_EN       0x0dULL
-#define CONTROL_PPFINT_EN       0x0eULL
-
-/* command specific defines */
-#define CMD_COMPL_WAIT          0x01
-#define CMD_INV_DEV_ENTRY       0x02
-#define CMD_INV_IOMMU_PAGES     0x03
-
-#define CMD_COMPL_WAIT_STORE_MASK	0x01
-#define CMD_COMPL_WAIT_INT_MASK		0x02
-#define CMD_INV_IOMMU_PAGES_SIZE_MASK	0x01
-#define CMD_INV_IOMMU_PAGES_PDE_MASK	0x02
-
-#define CMD_INV_IOMMU_ALL_PAGES_ADDRESS	0x7fffffffffffffffULL
-
-/* macros and definitions for device table entries */
-#define DEV_ENTRY_VALID         0x00
-#define DEV_ENTRY_TRANSLATION   0x01
-#define DEV_ENTRY_IR            0x3d
-#define DEV_ENTRY_IW            0x3e
-#define DEV_ENTRY_NO_PAGE_FAULT	0x62
-#define DEV_ENTRY_EX            0x67
-#define DEV_ENTRY_SYSMGT1       0x68
-#define DEV_ENTRY_SYSMGT2       0x69
-#define DEV_ENTRY_INIT_PASS     0xb8
-#define DEV_ENTRY_EINT_PASS     0xb9
-#define DEV_ENTRY_NMI_PASS      0xba
-#define DEV_ENTRY_LINT0_PASS    0xbe
-#define DEV_ENTRY_LINT1_PASS    0xbf
-#define DEV_ENTRY_MODE_MASK	0x07
-#define DEV_ENTRY_MODE_SHIFT	0x09
-
-/* constants to configure the command buffer */
-#define CMD_BUFFER_SIZE    8192
-#define CMD_BUFFER_ENTRIES 512
-#define MMIO_CMD_SIZE_SHIFT 56
-#define MMIO_CMD_SIZE_512 (0x9ULL << MMIO_CMD_SIZE_SHIFT)
-
-/* constants for event buffer handling */
-#define EVT_BUFFER_SIZE		8192 /* 512 entries */
-#define EVT_LEN_MASK		(0x9ULL << 56)
-
-#define PAGE_MODE_1_LEVEL 0x01
-#define PAGE_MODE_2_LEVEL 0x02
-#define PAGE_MODE_3_LEVEL 0x03
-
-#define IOMMU_PDE_NL_0   0x000ULL
-#define IOMMU_PDE_NL_1   0x200ULL
-#define IOMMU_PDE_NL_2   0x400ULL
-#define IOMMU_PDE_NL_3   0x600ULL
-
-#define IOMMU_PTE_L2_INDEX(address) (((address) >> 30) & 0x1ffULL)
-#define IOMMU_PTE_L1_INDEX(address) (((address) >> 21) & 0x1ffULL)
-#define IOMMU_PTE_L0_INDEX(address) (((address) >> 12) & 0x1ffULL)
-
-#define IOMMU_MAP_SIZE_L1 (1ULL << 21)
-#define IOMMU_MAP_SIZE_L2 (1ULL << 30)
-#define IOMMU_MAP_SIZE_L3 (1ULL << 39)
-
-#define IOMMU_PTE_P  (1ULL << 0)
-#define IOMMU_PTE_TV (1ULL << 1)
-#define IOMMU_PTE_U  (1ULL << 59)
-#define IOMMU_PTE_FC (1ULL << 60)
-#define IOMMU_PTE_IR (1ULL << 61)
-#define IOMMU_PTE_IW (1ULL << 62)
-
-#define IOMMU_L1_PDE(address) \
-	((address) | IOMMU_PDE_NL_1 | IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
-#define IOMMU_L2_PDE(address) \
-	((address) | IOMMU_PDE_NL_2 | IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
-
-#define IOMMU_PAGE_MASK (((1ULL << 52) - 1) & ~0xfffULL)
-#define IOMMU_PTE_PRESENT(pte) ((pte) & IOMMU_PTE_P)
-#define IOMMU_PTE_PAGE(pte) (phys_to_virt((pte) & IOMMU_PAGE_MASK))
-#define IOMMU_PTE_MODE(pte) (((pte) >> 9) & 0x07)
-
-#define IOMMU_PROT_MASK 0x03
-#define IOMMU_PROT_IR 0x01
-#define IOMMU_PROT_IW 0x02
-
-/* IOMMU capabilities */
-#define IOMMU_CAP_IOTLB   24
-#define IOMMU_CAP_NPCACHE 26
-
-#define MAX_DOMAIN_ID 65536
-
-/* FIXME: move this macro to <linux/pci.h> */
-#define PCI_BUS(x) (((x) >> 8) & 0xff)
-
-/*
- * This structure contains generic data for  IOMMU protection domains
- * independent of their use.
- */
-struct protection_domain {
-	spinlock_t lock; /* mostly used to lock the page table*/
-	u16 id;		 /* the domain id written to the device table */
-	int mode;	 /* paging mode (0-6 levels) */
-	u64 *pt_root;	 /* page table root pointer */
-	void *priv;	 /* private data */
-};
-
-/*
- * Data container for a dma_ops specific protection domain
- */
-struct dma_ops_domain {
-	struct list_head list;
-
-	/* generic protection domain information */
-	struct protection_domain domain;
-
-	/* size of the aperture for the mappings */
-	unsigned long aperture_size;
-
-	/* address we start to search for free addresses */
-	unsigned long next_bit;
-
-	/* address allocation bitmap */
-	unsigned long *bitmap;
-
-	/*
-	 * Array of PTE pages for the aperture. In this array we save all the
-	 * leaf pages of the domain page table used for the aperture. This way
-	 * we don't need to walk the page table to find a specific PTE. We can
-	 * just calculate its address in constant time.
-	 */
-	u64 **pte_pages;
-
-	/* This will be set to true when TLB needs to be flushed */
-	bool need_flush;
-
-	/*
-	 * if this is a preallocated domain, keep the device for which it was
-	 * preallocated in this variable
-	 */
-	u16 target_dev;
-};
-
-/*
- * Structure where we save information about one hardware AMD IOMMU in the
- * system.
- */
-struct amd_iommu {
-	struct list_head list;
-
-	/* locks the accesses to the hardware */
-	spinlock_t lock;
-
-	/* Pointer to PCI device of this IOMMU */
-	struct pci_dev *dev;
-
-	/*
-	 * Capability pointer. There could be more than one IOMMU per PCI
-	 * device function if there are more than one AMD IOMMU capability
-	 * pointers.
-	 */
-	u16 cap_ptr;
-
-	/* physical address of MMIO space */
-	u64 mmio_phys;
-	/* virtual address of MMIO space */
-	u8 *mmio_base;
-
-	/* capabilities of that IOMMU read from ACPI */
-	u32 cap;
-
-	/* pci domain of this IOMMU */
-	u16 pci_seg;
-
-	/* first device this IOMMU handles. read from PCI */
-	u16 first_device;
-	/* last device this IOMMU handles. read from PCI */
-	u16 last_device;
-
-	/* start of exclusion range of that IOMMU */
-	u64 exclusion_start;
-	/* length of exclusion range of that IOMMU */
-	u64 exclusion_length;
-
-	/* command buffer virtual address */
-	u8 *cmd_buf;
-	/* size of command buffer */
-	u32 cmd_buf_size;
-
-	/* event buffer virtual address */
-	u8 *evt_buf;
-	/* size of event buffer */
-	u32 evt_buf_size;
-	/* MSI number for event interrupt */
-	u16 evt_msi_num;
-
-	/* if one, we need to send a completion wait command */
-	int need_sync;
-
-	/* true if interrupts for this IOMMU are already enabled */
-	bool int_enabled;
-
-	/* default dma_ops domain for that IOMMU */
-	struct dma_ops_domain *default_dom;
-};
-
-/*
- * List with all IOMMUs in the system. This list is not locked because it is
- * only written and read at driver initialization or suspend time
- */
-extern struct list_head amd_iommu_list;
-
-/*
- * Structure defining one entry in the device table
- */
-struct dev_table_entry {
-	u32 data[8];
-};
-
-/*
- * One entry for unity mappings parsed out of the ACPI table.
- */
-struct unity_map_entry {
-	struct list_head list;
-
-	/* starting device id this entry is used for (including) */
-	u16 devid_start;
-	/* end device id this entry is used for (including) */
-	u16 devid_end;
-
-	/* start address to unity map (including) */
-	u64 address_start;
-	/* end address to unity map (including) */
-	u64 address_end;
-
-	/* required protection */
-	int prot;
-};
-
-/*
- * List of all unity mappings. It is not locked because as runtime it is only
- * read. It is created at ACPI table parsing time.
- */
-extern struct list_head amd_iommu_unity_map;
-
-/*
- * Data structures for device handling
- */
-
-/*
- * Device table used by hardware. Read and write accesses by software are
- * locked with the amd_iommu_pd_table lock.
- */
-extern struct dev_table_entry *amd_iommu_dev_table;
-
-/*
- * Alias table to find requestor ids to device ids. Not locked because only
- * read on runtime.
- */
-extern u16 *amd_iommu_alias_table;
-
-/*
- * Reverse lookup table to find the IOMMU which translates a specific device.
- */
-extern struct amd_iommu **amd_iommu_rlookup_table;
-
-/* size of the dma_ops aperture as power of 2 */
-extern unsigned amd_iommu_aperture_order;
-
-/* largest PCI device id we expect translation requests for */
-extern u16 amd_iommu_last_bdf;
-
-/* data structures for protection domain handling */
-extern struct protection_domain **amd_iommu_pd_table;
-
-/* allocation bitmap for domain ids */
-extern unsigned long *amd_iommu_pd_alloc_bitmap;
-
-/* will be 1 if device isolation is enabled */
-extern int amd_iommu_isolate;
-
-/*
- * If true, the addresses will be flushed on unmap time, not when
- * they are reused
- */
-extern bool amd_iommu_unmap_flush;
-
-/* takes a PCI device id and prints it out in a readable form */
-static inline void print_devid(u16 devid, int nl)
-{
-	int bus = devid >> 8;
-	int dev = devid >> 3 & 0x1f;
-	int fn  = devid & 0x07;
-
-	printk("%02x:%02x.%x", bus, dev, fn);
-	if (nl)
-		printk("\n");
-}
-
-/* takes bus and device/function and returns the device id
- * FIXME: should that be in generic PCI code? */
-static inline u16 calc_devid(u8 bus, u8 devfn)
-{
-	return (((u16)bus) << 8) | devfn;
-}
-
-#endif /* ASM_X86__AMD_IOMMU_TYPES_H */
diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h
deleted file mode 100644
index ef1d72d..0000000
--- a/include/asm-x86/apic.h
+++ /dev/null
@@ -1,199 +0,0 @@
-#ifndef ASM_X86__APIC_H
-#define ASM_X86__APIC_H
-
-#include <linux/pm.h>
-#include <linux/delay.h>
-
-#include <asm/alternative.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/cpufeature.h>
-#include <asm/msr.h>
-
-#define ARCH_APICTIMER_STOPS_ON_C3	1
-
-/*
- * Debugging macros
- */
-#define APIC_QUIET   0
-#define APIC_VERBOSE 1
-#define APIC_DEBUG   2
-
-/*
- * Define the default level of output to be very little
- * This can be turned up by using apic=verbose for more
- * information and apic=debug for _lots_ of information.
- * apic_verbosity is defined in apic.c
- */
-#define apic_printk(v, s, a...) do {       \
-		if ((v) <= apic_verbosity) \
-			printk(s, ##a);    \
-	} while (0)
-
-
-extern void generic_apic_probe(void);
-
-#ifdef CONFIG_X86_LOCAL_APIC
-
-extern unsigned int apic_verbosity;
-extern int local_apic_timer_c2_ok;
-
-extern int disable_apic;
-/*
- * Basic functions accessing APICs.
- */
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define setup_boot_clock setup_boot_APIC_clock
-#define setup_secondary_clock setup_secondary_APIC_clock
-#endif
-
-extern int is_vsmp_box(void);
-extern void xapic_wait_icr_idle(void);
-extern u32 safe_xapic_wait_icr_idle(void);
-extern u64 xapic_icr_read(void);
-extern void xapic_icr_write(u32, u32);
-extern int setup_profiling_timer(unsigned int);
-
-static inline void native_apic_mem_write(u32 reg, u32 v)
-{
-	volatile u32 *addr = (volatile u32 *)(APIC_BASE + reg);
-
-	alternative_io("movl %0, %1", "xchgl %0, %1", X86_FEATURE_11AP,
-		       ASM_OUTPUT2("=r" (v), "=m" (*addr)),
-		       ASM_OUTPUT2("0" (v), "m" (*addr)));
-}
-
-static inline u32 native_apic_mem_read(u32 reg)
-{
-	return *((volatile u32 *)(APIC_BASE + reg));
-}
-
-static inline void native_apic_msr_write(u32 reg, u32 v)
-{
-	if (reg == APIC_DFR || reg == APIC_ID || reg == APIC_LDR ||
-	    reg == APIC_LVR)
-		return;
-
-	wrmsr(APIC_BASE_MSR + (reg >> 4), v, 0);
-}
-
-static inline u32 native_apic_msr_read(u32 reg)
-{
-	u32 low, high;
-
-	if (reg == APIC_DFR)
-		return -1;
-
-	rdmsr(APIC_BASE_MSR + (reg >> 4), low, high);
-	return low;
-}
-
-#ifndef CONFIG_X86_32
-extern int x2apic, x2apic_preenabled;
-extern void check_x2apic(void);
-extern void enable_x2apic(void);
-extern void enable_IR_x2apic(void);
-extern void x2apic_icr_write(u32 low, u32 id);
-static inline int x2apic_enabled(void)
-{
-	int msr, msr2;
-
-	if (!cpu_has_x2apic)
-		return 0;
-
-	rdmsr(MSR_IA32_APICBASE, msr, msr2);
-	if (msr & X2APIC_ENABLE)
-		return 1;
-	return 0;
-}
-#else
-#define x2apic_enabled()	0
-#endif
-
-struct apic_ops {
-	u32 (*read)(u32 reg);
-	void (*write)(u32 reg, u32 v);
-	u64 (*icr_read)(void);
-	void (*icr_write)(u32 low, u32 high);
-	void (*wait_icr_idle)(void);
-	u32 (*safe_wait_icr_idle)(void);
-};
-
-extern struct apic_ops *apic_ops;
-
-#define apic_read (apic_ops->read)
-#define apic_write (apic_ops->write)
-#define apic_icr_read (apic_ops->icr_read)
-#define apic_icr_write (apic_ops->icr_write)
-#define apic_wait_icr_idle (apic_ops->wait_icr_idle)
-#define safe_apic_wait_icr_idle (apic_ops->safe_wait_icr_idle)
-
-extern int get_physical_broadcast(void);
-
-#ifdef CONFIG_X86_64
-static inline void ack_x2APIC_irq(void)
-{
-	/* Docs say use 0 for future compatibility */
-	native_apic_msr_write(APIC_EOI, 0);
-}
-#endif
-
-
-static inline void ack_APIC_irq(void)
-{
-	/*
-	 * ack_APIC_irq() actually gets compiled as a single instruction
-	 * ... yummie.
-	 */
-
-	/* Docs say use 0 for future compatibility */
-	apic_write(APIC_EOI, 0);
-}
-
-extern int lapic_get_maxlvt(void);
-extern void clear_local_APIC(void);
-extern void connect_bsp_APIC(void);
-extern void disconnect_bsp_APIC(int virt_wire_setup);
-extern void disable_local_APIC(void);
-extern void lapic_shutdown(void);
-extern int verify_local_APIC(void);
-extern void cache_APIC_registers(void);
-extern void sync_Arb_IDs(void);
-extern void init_bsp_APIC(void);
-extern void setup_local_APIC(void);
-extern void end_local_APIC_setup(void);
-extern void init_apic_mappings(void);
-extern void setup_boot_APIC_clock(void);
-extern void setup_secondary_APIC_clock(void);
-extern int APIC_init_uniprocessor(void);
-extern void enable_NMI_through_LVT0(void);
-
-/*
- * On 32bit this is mach-xxx local
- */
-#ifdef CONFIG_X86_64
-extern void early_init_lapic_mapping(void);
-extern int apic_is_clustered_box(void);
-#else
-static inline int apic_is_clustered_box(void)
-{
-	return 0;
-}
-#endif
-
-extern u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask);
-extern u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask);
-
-
-#else /* !CONFIG_X86_LOCAL_APIC */
-static inline void lapic_shutdown(void) { }
-#define local_apic_timer_c2_ok		1
-static inline void init_apic_mappings(void) { }
-
-#endif /* !CONFIG_X86_LOCAL_APIC */
-
-#endif /* ASM_X86__APIC_H */
diff --git a/include/asm-x86/apicdef.h b/include/asm-x86/apicdef.h
deleted file mode 100644
index b922c85..0000000
--- a/include/asm-x86/apicdef.h
+++ /dev/null
@@ -1,417 +0,0 @@
-#ifndef ASM_X86__APICDEF_H
-#define ASM_X86__APICDEF_H
-
-/*
- * Constants for various Intel APICs. (local APIC, IOAPIC, etc.)
- *
- * Alan Cox <Alan.Cox@linux.org>, 1995.
- * Ingo Molnar <mingo@redhat.com>, 1999, 2000
- */
-
-#define	APIC_DEFAULT_PHYS_BASE	0xfee00000
-
-#define	APIC_ID		0x20
-
-#define	APIC_LVR	0x30
-#define		APIC_LVR_MASK		0xFF00FF
-#define		GET_APIC_VERSION(x)	((x) & 0xFFu)
-#define		GET_APIC_MAXLVT(x)	(((x) >> 16) & 0xFFu)
-#ifdef CONFIG_X86_32
-#  define	APIC_INTEGRATED(x)	((x) & 0xF0u)
-#else
-#  define	APIC_INTEGRATED(x)	(1)
-#endif
-#define		APIC_XAPIC(x)		((x) >= 0x14)
-#define	APIC_TASKPRI	0x80
-#define		APIC_TPRI_MASK		0xFFu
-#define	APIC_ARBPRI	0x90
-#define		APIC_ARBPRI_MASK	0xFFu
-#define	APIC_PROCPRI	0xA0
-#define	APIC_EOI	0xB0
-#define		APIC_EIO_ACK		0x0
-#define	APIC_RRR	0xC0
-#define	APIC_LDR	0xD0
-#define		APIC_LDR_MASK		(0xFFu << 24)
-#define		GET_APIC_LOGICAL_ID(x)	(((x) >> 24) & 0xFFu)
-#define		SET_APIC_LOGICAL_ID(x)	(((x) << 24))
-#define		APIC_ALL_CPUS		0xFFu
-#define	APIC_DFR	0xE0
-#define		APIC_DFR_CLUSTER		0x0FFFFFFFul
-#define		APIC_DFR_FLAT			0xFFFFFFFFul
-#define	APIC_SPIV	0xF0
-#define		APIC_SPIV_FOCUS_DISABLED	(1 << 9)
-#define		APIC_SPIV_APIC_ENABLED		(1 << 8)
-#define	APIC_ISR	0x100
-#define	APIC_ISR_NR     0x8     /* Number of 32 bit ISR registers. */
-#define	APIC_TMR	0x180
-#define	APIC_IRR	0x200
-#define	APIC_ESR	0x280
-#define		APIC_ESR_SEND_CS	0x00001
-#define		APIC_ESR_RECV_CS	0x00002
-#define		APIC_ESR_SEND_ACC	0x00004
-#define		APIC_ESR_RECV_ACC	0x00008
-#define		APIC_ESR_SENDILL	0x00020
-#define		APIC_ESR_RECVILL	0x00040
-#define		APIC_ESR_ILLREGA	0x00080
-#define	APIC_ICR	0x300
-#define		APIC_DEST_SELF		0x40000
-#define		APIC_DEST_ALLINC	0x80000
-#define		APIC_DEST_ALLBUT	0xC0000
-#define		APIC_ICR_RR_MASK	0x30000
-#define		APIC_ICR_RR_INVALID	0x00000
-#define		APIC_ICR_RR_INPROG	0x10000
-#define		APIC_ICR_RR_VALID	0x20000
-#define		APIC_INT_LEVELTRIG	0x08000
-#define		APIC_INT_ASSERT		0x04000
-#define		APIC_ICR_BUSY		0x01000
-#define		APIC_DEST_LOGICAL	0x00800
-#define		APIC_DEST_PHYSICAL	0x00000
-#define		APIC_DM_FIXED		0x00000
-#define		APIC_DM_LOWEST		0x00100
-#define		APIC_DM_SMI		0x00200
-#define		APIC_DM_REMRD		0x00300
-#define		APIC_DM_NMI		0x00400
-#define		APIC_DM_INIT		0x00500
-#define		APIC_DM_STARTUP		0x00600
-#define		APIC_DM_EXTINT		0x00700
-#define		APIC_VECTOR_MASK	0x000FF
-#define	APIC_ICR2	0x310
-#define		GET_APIC_DEST_FIELD(x)	(((x) >> 24) & 0xFF)
-#define		SET_APIC_DEST_FIELD(x)	((x) << 24)
-#define	APIC_LVTT	0x320
-#define	APIC_LVTTHMR	0x330
-#define	APIC_LVTPC	0x340
-#define	APIC_LVT0	0x350
-#define		APIC_LVT_TIMER_BASE_MASK	(0x3 << 18)
-#define		GET_APIC_TIMER_BASE(x)		(((x) >> 18) & 0x3)
-#define		SET_APIC_TIMER_BASE(x)		(((x) << 18))
-#define		APIC_TIMER_BASE_CLKIN		0x0
-#define		APIC_TIMER_BASE_TMBASE		0x1
-#define		APIC_TIMER_BASE_DIV		0x2
-#define		APIC_LVT_TIMER_PERIODIC		(1 << 17)
-#define		APIC_LVT_MASKED			(1 << 16)
-#define		APIC_LVT_LEVEL_TRIGGER		(1 << 15)
-#define		APIC_LVT_REMOTE_IRR		(1 << 14)
-#define		APIC_INPUT_POLARITY		(1 << 13)
-#define		APIC_SEND_PENDING		(1 << 12)
-#define		APIC_MODE_MASK			0x700
-#define		GET_APIC_DELIVERY_MODE(x)	(((x) >> 8) & 0x7)
-#define		SET_APIC_DELIVERY_MODE(x, y)	(((x) & ~0x700) | ((y) << 8))
-#define			APIC_MODE_FIXED		0x0
-#define			APIC_MODE_NMI		0x4
-#define			APIC_MODE_EXTINT	0x7
-#define	APIC_LVT1	0x360
-#define	APIC_LVTERR	0x370
-#define	APIC_TMICT	0x380
-#define	APIC_TMCCT	0x390
-#define	APIC_TDCR	0x3E0
-#define APIC_SELF_IPI	0x3F0
-#define		APIC_TDR_DIV_TMBASE	(1 << 2)
-#define		APIC_TDR_DIV_1		0xB
-#define		APIC_TDR_DIV_2		0x0
-#define		APIC_TDR_DIV_4		0x1
-#define		APIC_TDR_DIV_8		0x2
-#define		APIC_TDR_DIV_16		0x3
-#define		APIC_TDR_DIV_32		0x8
-#define		APIC_TDR_DIV_64		0x9
-#define		APIC_TDR_DIV_128	0xA
-#define	APIC_EILVT0     0x500
-#define		APIC_EILVT_NR_AMD_K8	1	/* # of extended interrupts */
-#define		APIC_EILVT_NR_AMD_10H	4
-#define		APIC_EILVT_LVTOFF(x)	(((x) >> 4) & 0xF)
-#define		APIC_EILVT_MSG_FIX	0x0
-#define		APIC_EILVT_MSG_SMI	0x2
-#define		APIC_EILVT_MSG_NMI	0x4
-#define		APIC_EILVT_MSG_EXT	0x7
-#define		APIC_EILVT_MASKED	(1 << 16)
-#define	APIC_EILVT1     0x510
-#define	APIC_EILVT2     0x520
-#define	APIC_EILVT3     0x530
-
-#define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
-#define APIC_BASE_MSR	0x800
-#define X2APIC_ENABLE	(1UL << 10)
-
-#ifdef CONFIG_X86_32
-# define MAX_IO_APICS 64
-#else
-# define MAX_IO_APICS 128
-# define MAX_LOCAL_APIC 32768
-#endif
-
-/*
- * All x86-64 systems are xAPIC compatible.
- * In the following, "apicid" is a physical APIC ID.
- */
-#define XAPIC_DEST_CPUS_SHIFT	4
-#define XAPIC_DEST_CPUS_MASK	((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
-#define XAPIC_DEST_CLUSTER_MASK	(XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
-#define APIC_CLUSTER(apicid)	((apicid) & XAPIC_DEST_CLUSTER_MASK)
-#define APIC_CLUSTERID(apicid)	(APIC_CLUSTER(apicid) >> XAPIC_DEST_CPUS_SHIFT)
-#define APIC_CPUID(apicid)	((apicid) & XAPIC_DEST_CPUS_MASK)
-#define NUM_APIC_CLUSTERS	((BAD_APICID + 1) >> XAPIC_DEST_CPUS_SHIFT)
-
-/*
- * the local APIC register structure, memory mapped. Not terribly well
- * tested, but we might eventually use this one in the future - the
- * problem why we cannot use it right now is the P5 APIC, it has an
- * errata which cannot take 8-bit reads and writes, only 32-bit ones ...
- */
-#define u32 unsigned int
-
-struct local_apic {
-
-/*000*/	struct { u32 __reserved[4]; } __reserved_01;
-
-/*010*/	struct { u32 __reserved[4]; } __reserved_02;
-
-/*020*/	struct { /* APIC ID Register */
-		u32   __reserved_1	: 24,
-			phys_apic_id	:  4,
-			__reserved_2	:  4;
-		u32 __reserved[3];
-	} id;
-
-/*030*/	const
-	struct { /* APIC Version Register */
-		u32   version		:  8,
-			__reserved_1	:  8,
-			max_lvt		:  8,
-			__reserved_2	:  8;
-		u32 __reserved[3];
-	} version;
-
-/*040*/	struct { u32 __reserved[4]; } __reserved_03;
-
-/*050*/	struct { u32 __reserved[4]; } __reserved_04;
-
-/*060*/	struct { u32 __reserved[4]; } __reserved_05;
-
-/*070*/	struct { u32 __reserved[4]; } __reserved_06;
-
-/*080*/	struct { /* Task Priority Register */
-		u32   priority	:  8,
-			__reserved_1	: 24;
-		u32 __reserved_2[3];
-	} tpr;
-
-/*090*/	const
-	struct { /* Arbitration Priority Register */
-		u32   priority	:  8,
-			__reserved_1	: 24;
-		u32 __reserved_2[3];
-	} apr;
-
-/*0A0*/	const
-	struct { /* Processor Priority Register */
-		u32   priority	:  8,
-			__reserved_1	: 24;
-		u32 __reserved_2[3];
-	} ppr;
-
-/*0B0*/	struct { /* End Of Interrupt Register */
-		u32   eoi;
-		u32 __reserved[3];
-	} eoi;
-
-/*0C0*/	struct { u32 __reserved[4]; } __reserved_07;
-
-/*0D0*/	struct { /* Logical Destination Register */
-		u32   __reserved_1	: 24,
-			logical_dest	:  8;
-		u32 __reserved_2[3];
-	} ldr;
-
-/*0E0*/	struct { /* Destination Format Register */
-		u32   __reserved_1	: 28,
-			model		:  4;
-		u32 __reserved_2[3];
-	} dfr;
-
-/*0F0*/	struct { /* Spurious Interrupt Vector Register */
-		u32	spurious_vector	:  8,
-			apic_enabled	:  1,
-			focus_cpu	:  1,
-			__reserved_2	: 22;
-		u32 __reserved_3[3];
-	} svr;
-
-/*100*/	struct { /* In Service Register */
-/*170*/		u32 bitfield;
-		u32 __reserved[3];
-	} isr [8];
-
-/*180*/	struct { /* Trigger Mode Register */
-/*1F0*/		u32 bitfield;
-		u32 __reserved[3];
-	} tmr [8];
-
-/*200*/	struct { /* Interrupt Request Register */
-/*270*/		u32 bitfield;
-		u32 __reserved[3];
-	} irr [8];
-
-/*280*/	union { /* Error Status Register */
-		struct {
-			u32   send_cs_error			:  1,
-				receive_cs_error		:  1,
-				send_accept_error		:  1,
-				receive_accept_error		:  1,
-				__reserved_1			:  1,
-				send_illegal_vector		:  1,
-				receive_illegal_vector		:  1,
-				illegal_register_address	:  1,
-				__reserved_2			: 24;
-			u32 __reserved_3[3];
-		} error_bits;
-		struct {
-			u32 errors;
-			u32 __reserved_3[3];
-		} all_errors;
-	} esr;
-
-/*290*/	struct { u32 __reserved[4]; } __reserved_08;
-
-/*2A0*/	struct { u32 __reserved[4]; } __reserved_09;
-
-/*2B0*/	struct { u32 __reserved[4]; } __reserved_10;
-
-/*2C0*/	struct { u32 __reserved[4]; } __reserved_11;
-
-/*2D0*/	struct { u32 __reserved[4]; } __reserved_12;
-
-/*2E0*/	struct { u32 __reserved[4]; } __reserved_13;
-
-/*2F0*/	struct { u32 __reserved[4]; } __reserved_14;
-
-/*300*/	struct { /* Interrupt Command Register 1 */
-		u32   vector			:  8,
-			delivery_mode		:  3,
-			destination_mode	:  1,
-			delivery_status		:  1,
-			__reserved_1		:  1,
-			level			:  1,
-			trigger			:  1,
-			__reserved_2		:  2,
-			shorthand		:  2,
-			__reserved_3		:  12;
-		u32 __reserved_4[3];
-	} icr1;
-
-/*310*/	struct { /* Interrupt Command Register 2 */
-		union {
-			u32   __reserved_1	: 24,
-				phys_dest	:  4,
-				__reserved_2	:  4;
-			u32   __reserved_3	: 24,
-				logical_dest	:  8;
-		} dest;
-		u32 __reserved_4[3];
-	} icr2;
-
-/*320*/	struct { /* LVT - Timer */
-		u32   vector		:  8,
-			__reserved_1	:  4,
-			delivery_status	:  1,
-			__reserved_2	:  3,
-			mask		:  1,
-			timer_mode	:  1,
-			__reserved_3	: 14;
-		u32 __reserved_4[3];
-	} lvt_timer;
-
-/*330*/	struct { /* LVT - Thermal Sensor */
-		u32  vector		:  8,
-			delivery_mode	:  3,
-			__reserved_1	:  1,
-			delivery_status	:  1,
-			__reserved_2	:  3,
-			mask		:  1,
-			__reserved_3	: 15;
-		u32 __reserved_4[3];
-	} lvt_thermal;
-
-/*340*/	struct { /* LVT - Performance Counter */
-		u32   vector		:  8,
-			delivery_mode	:  3,
-			__reserved_1	:  1,
-			delivery_status	:  1,
-			__reserved_2	:  3,
-			mask		:  1,
-			__reserved_3	: 15;
-		u32 __reserved_4[3];
-	} lvt_pc;
-
-/*350*/	struct { /* LVT - LINT0 */
-		u32   vector		:  8,
-			delivery_mode	:  3,
-			__reserved_1	:  1,
-			delivery_status	:  1,
-			polarity	:  1,
-			remote_irr	:  1,
-			trigger		:  1,
-			mask		:  1,
-			__reserved_2	: 15;
-		u32 __reserved_3[3];
-	} lvt_lint0;
-
-/*360*/	struct { /* LVT - LINT1 */
-		u32   vector		:  8,
-			delivery_mode	:  3,
-			__reserved_1	:  1,
-			delivery_status	:  1,
-			polarity	:  1,
-			remote_irr	:  1,
-			trigger		:  1,
-			mask		:  1,
-			__reserved_2	: 15;
-		u32 __reserved_3[3];
-	} lvt_lint1;
-
-/*370*/	struct { /* LVT - Error */
-		u32   vector		:  8,
-			__reserved_1	:  4,
-			delivery_status	:  1,
-			__reserved_2	:  3,
-			mask		:  1,
-			__reserved_3	: 15;
-		u32 __reserved_4[3];
-	} lvt_error;
-
-/*380*/	struct { /* Timer Initial Count Register */
-		u32   initial_count;
-		u32 __reserved_2[3];
-	} timer_icr;
-
-/*390*/	const
-	struct { /* Timer Current Count Register */
-		u32   curr_count;
-		u32 __reserved_2[3];
-	} timer_ccr;
-
-/*3A0*/	struct { u32 __reserved[4]; } __reserved_16;
-
-/*3B0*/	struct { u32 __reserved[4]; } __reserved_17;
-
-/*3C0*/	struct { u32 __reserved[4]; } __reserved_18;
-
-/*3D0*/	struct { u32 __reserved[4]; } __reserved_19;
-
-/*3E0*/	struct { /* Timer Divide Configuration Register */
-		u32   divisor		:  4,
-			__reserved_1	: 28;
-		u32 __reserved_2[3];
-	} timer_dcr;
-
-/*3F0*/	struct { u32 __reserved[4]; } __reserved_20;
-
-} __attribute__ ((packed));
-
-#undef u32
-
-#ifdef CONFIG_X86_32
- #define BAD_APICID 0xFFu
-#else
- #define BAD_APICID 0xFFFFu
-#endif
-#endif /* ASM_X86__APICDEF_H */
diff --git a/include/asm-x86/arch_hooks.h b/include/asm-x86/arch_hooks.h
deleted file mode 100644
index de4596b..0000000
--- a/include/asm-x86/arch_hooks.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef ASM_X86__ARCH_HOOKS_H
-#define ASM_X86__ARCH_HOOKS_H
-
-#include <linux/interrupt.h>
-
-/*
- *	linux/include/asm/arch_hooks.h
- *
- *	define the architecture specific hooks
- */
-
-/* these aren't arch hooks, they are generic routines
- * that can be used by the hooks */
-extern void init_ISA_irqs(void);
-extern irqreturn_t timer_interrupt(int irq, void *dev_id);
-
-/* these are the defined hooks */
-extern void intr_init_hook(void);
-extern void pre_intr_init_hook(void);
-extern void pre_setup_arch_hook(void);
-extern void trap_init_hook(void);
-extern void pre_time_init_hook(void);
-extern void time_init_hook(void);
-extern void mca_nmi_hook(void);
-
-#endif /* ASM_X86__ARCH_HOOKS_H */
diff --git a/include/asm-x86/asm.h b/include/asm-x86/asm.h
deleted file mode 100644
index e1355f4..0000000
--- a/include/asm-x86/asm.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef ASM_X86__ASM_H
-#define ASM_X86__ASM_H
-
-#ifdef __ASSEMBLY__
-# define __ASM_FORM(x)	x
-# define __ASM_EX_SEC	.section __ex_table
-#else
-# define __ASM_FORM(x)	" " #x " "
-# define __ASM_EX_SEC	" .section __ex_table,\"a\"\n"
-#endif
-
-#ifdef CONFIG_X86_32
-# define __ASM_SEL(a,b) __ASM_FORM(a)
-#else
-# define __ASM_SEL(a,b) __ASM_FORM(b)
-#endif
-
-#define __ASM_SIZE(inst)	__ASM_SEL(inst##l, inst##q)
-#define __ASM_REG(reg)		__ASM_SEL(e##reg, r##reg)
-
-#define _ASM_PTR	__ASM_SEL(.long, .quad)
-#define _ASM_ALIGN	__ASM_SEL(.balign 4, .balign 8)
-
-#define _ASM_MOV	__ASM_SIZE(mov)
-#define _ASM_INC	__ASM_SIZE(inc)
-#define _ASM_DEC	__ASM_SIZE(dec)
-#define _ASM_ADD	__ASM_SIZE(add)
-#define _ASM_SUB	__ASM_SIZE(sub)
-#define _ASM_XADD	__ASM_SIZE(xadd)
-
-#define _ASM_AX		__ASM_REG(ax)
-#define _ASM_BX		__ASM_REG(bx)
-#define _ASM_CX		__ASM_REG(cx)
-#define _ASM_DX		__ASM_REG(dx)
-#define _ASM_SP		__ASM_REG(sp)
-#define _ASM_BP		__ASM_REG(bp)
-#define _ASM_SI		__ASM_REG(si)
-#define _ASM_DI		__ASM_REG(di)
-
-/* Exception table entry */
-# define _ASM_EXTABLE(from,to) \
-	__ASM_EX_SEC	\
-	_ASM_ALIGN "\n" \
-	_ASM_PTR #from "," #to "\n" \
-	" .previous\n"
-
-#endif /* ASM_X86__ASM_H */
diff --git a/include/asm-x86/atomic_32.h b/include/asm-x86/atomic_32.h
deleted file mode 100644
index 14d3f0b..0000000
--- a/include/asm-x86/atomic_32.h
+++ /dev/null
@@ -1,259 +0,0 @@
-#ifndef ASM_X86__ATOMIC_32_H
-#define ASM_X86__ATOMIC_32_H
-
-#include <linux/compiler.h>
-#include <asm/processor.h>
-#include <asm/cmpxchg.h>
-
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc..
- */
-
-/*
- * Make sure gcc doesn't try to be clever and move things around
- * on us. We need to use _exactly_ the address the user gave us,
- * not some alias that contains the same information.
- */
-typedef struct {
-	int counter;
-} atomic_t;
-
-#define ATOMIC_INIT(i)	{ (i) }
-
-/**
- * atomic_read - read atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically reads the value of @v.
- */
-#define atomic_read(v)		((v)->counter)
-
-/**
- * atomic_set - set atomic variable
- * @v: pointer of type atomic_t
- * @i: required value
- *
- * Atomically sets the value of @v to @i.
- */
-#define atomic_set(v, i)	(((v)->counter) = (i))
-
-/**
- * atomic_add - add integer to atomic variable
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v.
- */
-static inline void atomic_add(int i, atomic_t *v)
-{
-	asm volatile(LOCK_PREFIX "addl %1,%0"
-		     : "+m" (v->counter)
-		     : "ir" (i));
-}
-
-/**
- * atomic_sub - subtract integer from atomic variable
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v.
- */
-static inline void atomic_sub(int i, atomic_t *v)
-{
-	asm volatile(LOCK_PREFIX "subl %1,%0"
-		     : "+m" (v->counter)
-		     : "ir" (i));
-}
-
-/**
- * atomic_sub_and_test - subtract value from variable and test result
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v and returns
- * true if the result is zero, or false for all
- * other cases.
- */
-static inline int atomic_sub_and_test(int i, atomic_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "subl %2,%0; sete %1"
-		     : "+m" (v->counter), "=qm" (c)
-		     : "ir" (i) : "memory");
-	return c;
-}
-
-/**
- * atomic_inc - increment atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1.
- */
-static inline void atomic_inc(atomic_t *v)
-{
-	asm volatile(LOCK_PREFIX "incl %0"
-		     : "+m" (v->counter));
-}
-
-/**
- * atomic_dec - decrement atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically decrements @v by 1.
- */
-static inline void atomic_dec(atomic_t *v)
-{
-	asm volatile(LOCK_PREFIX "decl %0"
-		     : "+m" (v->counter));
-}
-
-/**
- * atomic_dec_and_test - decrement and test
- * @v: pointer of type atomic_t
- *
- * Atomically decrements @v by 1 and
- * returns true if the result is 0, or false for all other
- * cases.
- */
-static inline int atomic_dec_and_test(atomic_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "decl %0; sete %1"
-		     : "+m" (v->counter), "=qm" (c)
-		     : : "memory");
-	return c != 0;
-}
-
-/**
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-static inline int atomic_inc_and_test(atomic_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "incl %0; sete %1"
-		     : "+m" (v->counter), "=qm" (c)
-		     : : "memory");
-	return c != 0;
-}
-
-/**
- * atomic_add_negative - add and test if negative
- * @v: pointer of type atomic_t
- * @i: integer value to add
- *
- * Atomically adds @i to @v and returns true
- * if the result is negative, or false when
- * result is greater than or equal to zero.
- */
-static inline int atomic_add_negative(int i, atomic_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "addl %2,%0; sets %1"
-		     : "+m" (v->counter), "=qm" (c)
-		     : "ir" (i) : "memory");
-	return c;
-}
-
-/**
- * atomic_add_return - add integer and return
- * @v: pointer of type atomic_t
- * @i: integer value to add
- *
- * Atomically adds @i to @v and returns @i + @v
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	int __i;
-#ifdef CONFIG_M386
-	unsigned long flags;
-	if (unlikely(boot_cpu_data.x86 <= 3))
-		goto no_xadd;
-#endif
-	/* Modern 486+ processor */
-	__i = i;
-	asm volatile(LOCK_PREFIX "xaddl %0, %1"
-		     : "+r" (i), "+m" (v->counter)
-		     : : "memory");
-	return i + __i;
-
-#ifdef CONFIG_M386
-no_xadd: /* Legacy 386 processor */
-	local_irq_save(flags);
-	__i = atomic_read(v);
-	atomic_set(v, i + __i);
-	local_irq_restore(flags);
-	return i + __i;
-#endif
-}
-
-/**
- * atomic_sub_return - subtract integer and return
- * @v: pointer of type atomic_t
- * @i: integer value to subtract
- *
- * Atomically subtracts @i from @v and returns @v - @i
- */
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	return atomic_add_return(-i, v);
-}
-
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
-
-/**
- * atomic_add_unless - add unless the number is already a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as @v was not already @u.
- * Returns non-zero if @v was not @u, and zero otherwise.
- */
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-	c = atomic_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c != (u);
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-#define atomic_inc_return(v)  (atomic_add_return(1, v))
-#define atomic_dec_return(v)  (atomic_sub_return(1, v))
-
-/* These are x86-specific, used by some header files */
-#define atomic_clear_mask(mask, addr)				\
-	asm volatile(LOCK_PREFIX "andl %0,%1"			\
-		     : : "r" (~(mask)), "m" (*(addr)) : "memory")
-
-#define atomic_set_mask(mask, addr)				\
-	asm volatile(LOCK_PREFIX "orl %0,%1"				\
-		     : : "r" (mask), "m" (*(addr)) : "memory")
-
-/* Atomic operations are already serializing on x86 */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#include <asm-generic/atomic.h>
-#endif /* ASM_X86__ATOMIC_32_H */
diff --git a/include/asm-x86/atomic_64.h b/include/asm-x86/atomic_64.h
deleted file mode 100644
index 2cb218c..0000000
--- a/include/asm-x86/atomic_64.h
+++ /dev/null
@@ -1,473 +0,0 @@
-#ifndef ASM_X86__ATOMIC_64_H
-#define ASM_X86__ATOMIC_64_H
-
-#include <asm/alternative.h>
-#include <asm/cmpxchg.h>
-
-/* atomic_t should be 32 bit signed type */
-
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc..
- */
-
-/*
- * Make sure gcc doesn't try to be clever and move things around
- * on us. We need to use _exactly_ the address the user gave us,
- * not some alias that contains the same information.
- */
-typedef struct {
-	int counter;
-} atomic_t;
-
-#define ATOMIC_INIT(i)	{ (i) }
-
-/**
- * atomic_read - read atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically reads the value of @v.
- */
-#define atomic_read(v)		((v)->counter)
-
-/**
- * atomic_set - set atomic variable
- * @v: pointer of type atomic_t
- * @i: required value
- *
- * Atomically sets the value of @v to @i.
- */
-#define atomic_set(v, i)		(((v)->counter) = (i))
-
-/**
- * atomic_add - add integer to atomic variable
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v.
- */
-static inline void atomic_add(int i, atomic_t *v)
-{
-	asm volatile(LOCK_PREFIX "addl %1,%0"
-		     : "=m" (v->counter)
-		     : "ir" (i), "m" (v->counter));
-}
-
-/**
- * atomic_sub - subtract the atomic variable
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v.
- */
-static inline void atomic_sub(int i, atomic_t *v)
-{
-	asm volatile(LOCK_PREFIX "subl %1,%0"
-		     : "=m" (v->counter)
-		     : "ir" (i), "m" (v->counter));
-}
-
-/**
- * atomic_sub_and_test - subtract value from variable and test result
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v and returns
- * true if the result is zero, or false for all
- * other cases.
- */
-static inline int atomic_sub_and_test(int i, atomic_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "subl %2,%0; sete %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "ir" (i), "m" (v->counter) : "memory");
-	return c;
-}
-
-/**
- * atomic_inc - increment atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1.
- */
-static inline void atomic_inc(atomic_t *v)
-{
-	asm volatile(LOCK_PREFIX "incl %0"
-		     : "=m" (v->counter)
-		     : "m" (v->counter));
-}
-
-/**
- * atomic_dec - decrement atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically decrements @v by 1.
- */
-static inline void atomic_dec(atomic_t *v)
-{
-	asm volatile(LOCK_PREFIX "decl %0"
-		     : "=m" (v->counter)
-		     : "m" (v->counter));
-}
-
-/**
- * atomic_dec_and_test - decrement and test
- * @v: pointer of type atomic_t
- *
- * Atomically decrements @v by 1 and
- * returns true if the result is 0, or false for all other
- * cases.
- */
-static inline int atomic_dec_and_test(atomic_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "decl %0; sete %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "m" (v->counter) : "memory");
-	return c != 0;
-}
-
-/**
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-static inline int atomic_inc_and_test(atomic_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "incl %0; sete %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "m" (v->counter) : "memory");
-	return c != 0;
-}
-
-/**
- * atomic_add_negative - add and test if negative
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v and returns true
- * if the result is negative, or false when
- * result is greater than or equal to zero.
- */
-static inline int atomic_add_negative(int i, atomic_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "addl %2,%0; sets %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "ir" (i), "m" (v->counter) : "memory");
-	return c;
-}
-
-/**
- * atomic_add_return - add and return
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v and returns @i + @v
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	int __i = i;
-	asm volatile(LOCK_PREFIX "xaddl %0, %1"
-		     : "+r" (i), "+m" (v->counter)
-		     : : "memory");
-	return i + __i;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	return atomic_add_return(-i, v);
-}
-
-#define atomic_inc_return(v)  (atomic_add_return(1, v))
-#define atomic_dec_return(v)  (atomic_sub_return(1, v))
-
-/* An 64bit atomic type */
-
-typedef struct {
-	long counter;
-} atomic64_t;
-
-#define ATOMIC64_INIT(i)	{ (i) }
-
-/**
- * atomic64_read - read atomic64 variable
- * @v: pointer of type atomic64_t
- *
- * Atomically reads the value of @v.
- * Doesn't imply a read memory barrier.
- */
-#define atomic64_read(v)		((v)->counter)
-
-/**
- * atomic64_set - set atomic64 variable
- * @v: pointer to type atomic64_t
- * @i: required value
- *
- * Atomically sets the value of @v to @i.
- */
-#define atomic64_set(v, i)		(((v)->counter) = (i))
-
-/**
- * atomic64_add - add integer to atomic64 variable
- * @i: integer value to add
- * @v: pointer to type atomic64_t
- *
- * Atomically adds @i to @v.
- */
-static inline void atomic64_add(long i, atomic64_t *v)
-{
-	asm volatile(LOCK_PREFIX "addq %1,%0"
-		     : "=m" (v->counter)
-		     : "er" (i), "m" (v->counter));
-}
-
-/**
- * atomic64_sub - subtract the atomic64 variable
- * @i: integer value to subtract
- * @v: pointer to type atomic64_t
- *
- * Atomically subtracts @i from @v.
- */
-static inline void atomic64_sub(long i, atomic64_t *v)
-{
-	asm volatile(LOCK_PREFIX "subq %1,%0"
-		     : "=m" (v->counter)
-		     : "er" (i), "m" (v->counter));
-}
-
-/**
- * atomic64_sub_and_test - subtract value from variable and test result
- * @i: integer value to subtract
- * @v: pointer to type atomic64_t
- *
- * Atomically subtracts @i from @v and returns
- * true if the result is zero, or false for all
- * other cases.
- */
-static inline int atomic64_sub_and_test(long i, atomic64_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "subq %2,%0; sete %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "er" (i), "m" (v->counter) : "memory");
-	return c;
-}
-
-/**
- * atomic64_inc - increment atomic64 variable
- * @v: pointer to type atomic64_t
- *
- * Atomically increments @v by 1.
- */
-static inline void atomic64_inc(atomic64_t *v)
-{
-	asm volatile(LOCK_PREFIX "incq %0"
-		     : "=m" (v->counter)
-		     : "m" (v->counter));
-}
-
-/**
- * atomic64_dec - decrement atomic64 variable
- * @v: pointer to type atomic64_t
- *
- * Atomically decrements @v by 1.
- */
-static inline void atomic64_dec(atomic64_t *v)
-{
-	asm volatile(LOCK_PREFIX "decq %0"
-		     : "=m" (v->counter)
-		     : "m" (v->counter));
-}
-
-/**
- * atomic64_dec_and_test - decrement and test
- * @v: pointer to type atomic64_t
- *
- * Atomically decrements @v by 1 and
- * returns true if the result is 0, or false for all other
- * cases.
- */
-static inline int atomic64_dec_and_test(atomic64_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "decq %0; sete %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "m" (v->counter) : "memory");
-	return c != 0;
-}
-
-/**
- * atomic64_inc_and_test - increment and test
- * @v: pointer to type atomic64_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-static inline int atomic64_inc_and_test(atomic64_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "incq %0; sete %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "m" (v->counter) : "memory");
-	return c != 0;
-}
-
-/**
- * atomic64_add_negative - add and test if negative
- * @i: integer value to add
- * @v: pointer to type atomic64_t
- *
- * Atomically adds @i to @v and returns true
- * if the result is negative, or false when
- * result is greater than or equal to zero.
- */
-static inline int atomic64_add_negative(long i, atomic64_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "addq %2,%0; sets %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "er" (i), "m" (v->counter) : "memory");
-	return c;
-}
-
-/**
- * atomic64_add_return - add and return
- * @i: integer value to add
- * @v: pointer to type atomic64_t
- *
- * Atomically adds @i to @v and returns @i + @v
- */
-static inline long atomic64_add_return(long i, atomic64_t *v)
-{
-	long __i = i;
-	asm volatile(LOCK_PREFIX "xaddq %0, %1;"
-		     : "+r" (i), "+m" (v->counter)
-		     : : "memory");
-	return i + __i;
-}
-
-static inline long atomic64_sub_return(long i, atomic64_t *v)
-{
-	return atomic64_add_return(-i, v);
-}
-
-#define atomic64_inc_return(v)  (atomic64_add_return(1, (v)))
-#define atomic64_dec_return(v)  (atomic64_sub_return(1, (v)))
-
-#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
-
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
-
-/**
- * atomic_add_unless - add unless the number is a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns non-zero if @v was not @u, and zero otherwise.
- */
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-	c = atomic_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c != (u);
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-/**
- * atomic64_add_unless - add unless the number is a given value
- * @v: pointer of type atomic64_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns non-zero if @v was not @u, and zero otherwise.
- */
-static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
-{
-	long c, old;
-	c = atomic64_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic64_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c != (u);
-}
-
-/**
- * atomic_inc_short - increment of a short integer
- * @v: pointer to type int
- *
- * Atomically adds 1 to @v
- * Returns the new value of @u
- */
-static inline short int atomic_inc_short(short int *v)
-{
-	asm(LOCK_PREFIX "addw $1, %0" : "+m" (*v));
-	return *v;
-}
-
-/**
- * atomic_or_long - OR of two long integers
- * @v1: pointer to type unsigned long
- * @v2: pointer to type unsigned long
- *
- * Atomically ORs @v1 and @v2
- * Returns the result of the OR
- */
-static inline void atomic_or_long(unsigned long *v1, unsigned long v2)
-{
-	asm(LOCK_PREFIX "orq %1, %0" : "+m" (*v1) : "r" (v2));
-}
-
-#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
-
-/* These are x86-specific, used by some header files */
-#define atomic_clear_mask(mask, addr)					\
-	asm volatile(LOCK_PREFIX "andl %0,%1"				\
-		     : : "r" (~(mask)), "m" (*(addr)) : "memory")
-
-#define atomic_set_mask(mask, addr)					\
-	asm volatile(LOCK_PREFIX "orl %0,%1"				\
-		     : : "r" ((unsigned)(mask)), "m" (*(addr))		\
-		     : "memory")
-
-/* Atomic operations are already serializing on x86 */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#include <asm-generic/atomic.h>
-#endif /* ASM_X86__ATOMIC_64_H */
diff --git a/include/asm-x86/auxvec.h b/include/asm-x86/auxvec.h
deleted file mode 100644
index 12c7cac..0000000
--- a/include/asm-x86/auxvec.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASM_X86__AUXVEC_H
-#define ASM_X86__AUXVEC_H
-/*
- * Architecture-neutral AT_ values in 0-17, leave some room
- * for more of them, start the x86-specific ones at 32.
- */
-#ifdef __i386__
-#define AT_SYSINFO		32
-#endif
-#define AT_SYSINFO_EHDR		33
-
-#endif /* ASM_X86__AUXVEC_H */
diff --git a/include/asm-x86/bios_ebda.h b/include/asm-x86/bios_ebda.h
deleted file mode 100644
index 79b4b88..0000000
--- a/include/asm-x86/bios_ebda.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef ASM_X86__BIOS_EBDA_H
-#define ASM_X86__BIOS_EBDA_H
-
-#include <asm/io.h>
-
-/*
- * there is a real-mode segmented pointer pointing to the
- * 4K EBDA area at 0x40E.
- */
-static inline unsigned int get_bios_ebda(void)
-{
-	unsigned int address = *(unsigned short *)phys_to_virt(0x40E);
-	address <<= 4;
-	return address;	/* 0 means none */
-}
-
-void reserve_ebda_region(void);
-
-#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
-/*
- * This is obviously not a great place for this, but we want to be
- * able to scatter it around anywhere in the kernel.
- */
-void check_for_bios_corruption(void);
-void start_periodic_check_for_corruption(void);
-#else
-static inline void check_for_bios_corruption(void)
-{
-}
-
-static inline void start_periodic_check_for_corruption(void)
-{
-}
-#endif
-
-#endif /* ASM_X86__BIOS_EBDA_H */
diff --git a/include/asm-x86/bitops.h b/include/asm-x86/bitops.h
deleted file mode 100644
index 451a747..0000000
--- a/include/asm-x86/bitops.h
+++ /dev/null
@@ -1,451 +0,0 @@
-#ifndef ASM_X86__BITOPS_H
-#define ASM_X86__BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h>
-#include <asm/alternative.h>
-
-/*
- * These have to be done with inline assembly: that way the bit-setting
- * is guaranteed to be atomic. All bit operations return 0 if the bit
- * was cleared before the operation and != 0 if it was not.
- *
- * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
- */
-
-#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 1)
-/* Technically wrong, but this avoids compilation errors on some gcc
-   versions. */
-#define BITOP_ADDR(x) "=m" (*(volatile long *) (x))
-#else
-#define BITOP_ADDR(x) "+m" (*(volatile long *) (x))
-#endif
-
-#define ADDR				BITOP_ADDR(addr)
-
-/*
- * We do the locked ops that don't return the old value as
- * a mask operation on a byte.
- */
-#define IS_IMMEDIATE(nr)		(__builtin_constant_p(nr))
-#define CONST_MASK_ADDR(nr, addr)	BITOP_ADDR((void *)(addr) + ((nr)>>3))
-#define CONST_MASK(nr)			(1 << ((nr) & 7))
-
-/**
- * set_bit - Atomically set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * This function is atomic and may not be reordered.  See __set_bit()
- * if you do not require the atomic guarantees.
- *
- * Note: there are no guarantees that this function will not be reordered
- * on non x86 architectures, so if you are writing portable code,
- * make sure not to rely on its reordering guarantees.
- *
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static inline void set_bit(unsigned int nr, volatile unsigned long *addr)
-{
-	if (IS_IMMEDIATE(nr)) {
-		asm volatile(LOCK_PREFIX "orb %1,%0"
-			: CONST_MASK_ADDR(nr, addr)
-			: "iq" ((u8)CONST_MASK(nr))
-			: "memory");
-	} else {
-		asm volatile(LOCK_PREFIX "bts %1,%0"
-			: BITOP_ADDR(addr) : "Ir" (nr) : "memory");
-	}
-}
-
-/**
- * __set_bit - Set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * Unlike set_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static inline void __set_bit(int nr, volatile unsigned long *addr)
-{
-	asm volatile("bts %1,%0" : ADDR : "Ir" (nr) : "memory");
-}
-
-/**
- * clear_bit - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * clear_bit() is atomic and may not be reordered.  However, it does
- * not contain a memory barrier, so if it is used for locking purposes,
- * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
- * in order to ensure changes are visible on other processors.
- */
-static inline void clear_bit(int nr, volatile unsigned long *addr)
-{
-	if (IS_IMMEDIATE(nr)) {
-		asm volatile(LOCK_PREFIX "andb %1,%0"
-			: CONST_MASK_ADDR(nr, addr)
-			: "iq" ((u8)~CONST_MASK(nr)));
-	} else {
-		asm volatile(LOCK_PREFIX "btr %1,%0"
-			: BITOP_ADDR(addr)
-			: "Ir" (nr));
-	}
-}
-
-/*
- * clear_bit_unlock - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * clear_bit() is atomic and implies release semantics before the memory
- * operation. It can be used for an unlock.
- */
-static inline void clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
-{
-	barrier();
-	clear_bit(nr, addr);
-}
-
-static inline void __clear_bit(int nr, volatile unsigned long *addr)
-{
-	asm volatile("btr %1,%0" : ADDR : "Ir" (nr));
-}
-
-/*
- * __clear_bit_unlock - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * __clear_bit() is non-atomic and implies release semantics before the memory
- * operation. It can be used for an unlock if no other CPUs can concurrently
- * modify other bits in the word.
- *
- * No memory barrier is required here, because x86 cannot reorder stores past
- * older loads. Same principle as spin_unlock.
- */
-static inline void __clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
-{
-	barrier();
-	__clear_bit(nr, addr);
-}
-
-#define smp_mb__before_clear_bit()	barrier()
-#define smp_mb__after_clear_bit()	barrier()
-
-/**
- * __change_bit - Toggle a bit in memory
- * @nr: the bit to change
- * @addr: the address to start counting from
- *
- * Unlike change_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static inline void __change_bit(int nr, volatile unsigned long *addr)
-{
-	asm volatile("btc %1,%0" : ADDR : "Ir" (nr));
-}
-
-/**
- * change_bit - Toggle a bit in memory
- * @nr: Bit to change
- * @addr: Address to start counting from
- *
- * change_bit() is atomic and may not be reordered.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static inline void change_bit(int nr, volatile unsigned long *addr)
-{
-	asm volatile(LOCK_PREFIX "btc %1,%0" : ADDR : "Ir" (nr));
-}
-
-/**
- * test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
-{
-	int oldbit;
-
-	asm volatile(LOCK_PREFIX "bts %2,%1\n\t"
-		     "sbb %0,%0" : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
-
-	return oldbit;
-}
-
-/**
- * test_and_set_bit_lock - Set a bit and return its old value for lock
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This is the same as test_and_set_bit on x86.
- */
-static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr)
-{
-	return test_and_set_bit(nr, addr);
-}
-
-/**
- * __test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail.  You must protect multiple accesses with a lock.
- */
-static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
-{
-	int oldbit;
-
-	asm("bts %2,%1\n\t"
-	    "sbb %0,%0"
-	    : "=r" (oldbit), ADDR
-	    : "Ir" (nr));
-	return oldbit;
-}
-
-/**
- * test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
-{
-	int oldbit;
-
-	asm volatile(LOCK_PREFIX "btr %2,%1\n\t"
-		     "sbb %0,%0"
-		     : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
-
-	return oldbit;
-}
-
-/**
- * __test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail.  You must protect multiple accesses with a lock.
- */
-static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
-{
-	int oldbit;
-
-	asm volatile("btr %2,%1\n\t"
-		     "sbb %0,%0"
-		     : "=r" (oldbit), ADDR
-		     : "Ir" (nr));
-	return oldbit;
-}
-
-/* WARNING: non atomic and it can be reordered! */
-static inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
-{
-	int oldbit;
-
-	asm volatile("btc %2,%1\n\t"
-		     "sbb %0,%0"
-		     : "=r" (oldbit), ADDR
-		     : "Ir" (nr) : "memory");
-
-	return oldbit;
-}
-
-/**
- * test_and_change_bit - Change a bit and return its old value
- * @nr: Bit to change
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
-{
-	int oldbit;
-
-	asm volatile(LOCK_PREFIX "btc %2,%1\n\t"
-		     "sbb %0,%0"
-		     : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
-
-	return oldbit;
-}
-
-static inline int constant_test_bit(int nr, const volatile unsigned long *addr)
-{
-	return ((1UL << (nr % BITS_PER_LONG)) &
-		(((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0;
-}
-
-static inline int variable_test_bit(int nr, volatile const unsigned long *addr)
-{
-	int oldbit;
-
-	asm volatile("bt %2,%1\n\t"
-		     "sbb %0,%0"
-		     : "=r" (oldbit)
-		     : "m" (*(unsigned long *)addr), "Ir" (nr));
-
-	return oldbit;
-}
-
-#if 0 /* Fool kernel-doc since it doesn't do macros yet */
-/**
- * test_bit - Determine whether a bit is set
- * @nr: bit number to test
- * @addr: Address to start counting from
- */
-static int test_bit(int nr, const volatile unsigned long *addr);
-#endif
-
-#define test_bit(nr, addr)			\
-	(__builtin_constant_p((nr))		\
-	 ? constant_test_bit((nr), (addr))	\
-	 : variable_test_bit((nr), (addr)))
-
-/**
- * __ffs - find first set bit in word
- * @word: The word to search
- *
- * Undefined if no bit exists, so code should check against 0 first.
- */
-static inline unsigned long __ffs(unsigned long word)
-{
-	asm("bsf %1,%0"
-		: "=r" (word)
-		: "rm" (word));
-	return word;
-}
-
-/**
- * ffz - find first zero bit in word
- * @word: The word to search
- *
- * Undefined if no zero exists, so code should check against ~0UL first.
- */
-static inline unsigned long ffz(unsigned long word)
-{
-	asm("bsf %1,%0"
-		: "=r" (word)
-		: "r" (~word));
-	return word;
-}
-
-/*
- * __fls: find last set bit in word
- * @word: The word to search
- *
- * Undefined if no set bit exists, so code should check against 0 first.
- */
-static inline unsigned long __fls(unsigned long word)
-{
-	asm("bsr %1,%0"
-	    : "=r" (word)
-	    : "rm" (word));
-	return word;
-}
-
-#ifdef __KERNEL__
-/**
- * ffs - find first set bit in word
- * @x: the word to search
- *
- * This is defined the same way as the libc and compiler builtin ffs
- * routines, therefore differs in spirit from the other bitops.
- *
- * ffs(value) returns 0 if value is 0 or the position of the first
- * set bit if value is nonzero. The first (least significant) bit
- * is at position 1.
- */
-static inline int ffs(int x)
-{
-	int r;
-#ifdef CONFIG_X86_CMOV
-	asm("bsfl %1,%0\n\t"
-	    "cmovzl %2,%0"
-	    : "=r" (r) : "rm" (x), "r" (-1));
-#else
-	asm("bsfl %1,%0\n\t"
-	    "jnz 1f\n\t"
-	    "movl $-1,%0\n"
-	    "1:" : "=r" (r) : "rm" (x));
-#endif
-	return r + 1;
-}
-
-/**
- * fls - find last set bit in word
- * @x: the word to search
- *
- * This is defined in a similar way as the libc and compiler builtin
- * ffs, but returns the position of the most significant set bit.
- *
- * fls(value) returns 0 if value is 0 or the position of the last
- * set bit if value is nonzero. The last (most significant) bit is
- * at position 32.
- */
-static inline int fls(int x)
-{
-	int r;
-#ifdef CONFIG_X86_CMOV
-	asm("bsrl %1,%0\n\t"
-	    "cmovzl %2,%0"
-	    : "=&r" (r) : "rm" (x), "rm" (-1));
-#else
-	asm("bsrl %1,%0\n\t"
-	    "jnz 1f\n\t"
-	    "movl $-1,%0\n"
-	    "1:" : "=r" (r) : "rm" (x));
-#endif
-	return r + 1;
-}
-#endif /* __KERNEL__ */
-
-#undef ADDR
-
-#ifdef __KERNEL__
-
-#include <asm-generic/bitops/sched.h>
-
-#define ARCH_HAS_FAST_MULTIPLIER 1
-
-#include <asm-generic/bitops/hweight.h>
-
-#endif /* __KERNEL__ */
-
-#include <asm-generic/bitops/fls64.h>
-
-#ifdef __KERNEL__
-
-#include <asm-generic/bitops/ext2-non-atomic.h>
-
-#define ext2_set_bit_atomic(lock, nr, addr)			\
-	test_and_set_bit((nr), (unsigned long *)(addr))
-#define ext2_clear_bit_atomic(lock, nr, addr)			\
-	test_and_clear_bit((nr), (unsigned long *)(addr))
-
-#include <asm-generic/bitops/minix.h>
-
-#endif /* __KERNEL__ */
-#endif /* ASM_X86__BITOPS_H */
diff --git a/include/asm-x86/boot.h b/include/asm-x86/boot.h
deleted file mode 100644
index 1d63bd5..0000000
--- a/include/asm-x86/boot.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef ASM_X86__BOOT_H
-#define ASM_X86__BOOT_H
-
-/* Don't touch these, unless you really know what you're doing. */
-#define DEF_SYSSEG	0x1000
-#define DEF_SYSSIZE	0x7F00
-
-/* Internal svga startup constants */
-#define NORMAL_VGA	0xffff		/* 80x25 mode */
-#define EXTENDED_VGA	0xfffe		/* 80x50 mode */
-#define ASK_VGA		0xfffd		/* ask for it at bootup */
-
-/* Physical address where kernel should be loaded. */
-#define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
-				+ (CONFIG_PHYSICAL_ALIGN - 1)) \
-				& ~(CONFIG_PHYSICAL_ALIGN - 1))
-
-#ifdef CONFIG_X86_64
-#define BOOT_HEAP_SIZE	0x7000
-#define BOOT_STACK_SIZE	0x4000
-#else
-#define BOOT_HEAP_SIZE	0x4000
-#define BOOT_STACK_SIZE	0x1000
-#endif
-
-#endif /* ASM_X86__BOOT_H */
diff --git a/include/asm-x86/bootparam.h b/include/asm-x86/bootparam.h
deleted file mode 100644
index ccf027e..0000000
--- a/include/asm-x86/bootparam.h
+++ /dev/null
@@ -1,111 +0,0 @@
-#ifndef ASM_X86__BOOTPARAM_H
-#define ASM_X86__BOOTPARAM_H
-
-#include <linux/types.h>
-#include <linux/screen_info.h>
-#include <linux/apm_bios.h>
-#include <linux/edd.h>
-#include <asm/e820.h>
-#include <asm/ist.h>
-#include <video/edid.h>
-
-/* setup data types */
-#define SETUP_NONE			0
-#define SETUP_E820_EXT			1
-
-/* extensible setup data list node */
-struct setup_data {
-	__u64 next;
-	__u32 type;
-	__u32 len;
-	__u8 data[0];
-};
-
-struct setup_header {
-	__u8	setup_sects;
-	__u16	root_flags;
-	__u32	syssize;
-	__u16	ram_size;
-#define RAMDISK_IMAGE_START_MASK	0x07FF
-#define RAMDISK_PROMPT_FLAG		0x8000
-#define RAMDISK_LOAD_FLAG		0x4000
-	__u16	vid_mode;
-	__u16	root_dev;
-	__u16	boot_flag;
-	__u16	jump;
-	__u32	header;
-	__u16	version;
-	__u32	realmode_swtch;
-	__u16	start_sys;
-	__u16	kernel_version;
-	__u8	type_of_loader;
-	__u8	loadflags;
-#define LOADED_HIGH	(1<<0)
-#define QUIET_FLAG	(1<<5)
-#define KEEP_SEGMENTS	(1<<6)
-#define CAN_USE_HEAP	(1<<7)
-	__u16	setup_move_size;
-	__u32	code32_start;
-	__u32	ramdisk_image;
-	__u32	ramdisk_size;
-	__u32	bootsect_kludge;
-	__u16	heap_end_ptr;
-	__u16	_pad1;
-	__u32	cmd_line_ptr;
-	__u32	initrd_addr_max;
-	__u32	kernel_alignment;
-	__u8	relocatable_kernel;
-	__u8	_pad2[3];
-	__u32	cmdline_size;
-	__u32	hardware_subarch;
-	__u64	hardware_subarch_data;
-	__u32	payload_offset;
-	__u32	payload_length;
-	__u64	setup_data;
-} __attribute__((packed));
-
-struct sys_desc_table {
-	__u16 length;
-	__u8  table[14];
-};
-
-struct efi_info {
-	__u32 efi_loader_signature;
-	__u32 efi_systab;
-	__u32 efi_memdesc_size;
-	__u32 efi_memdesc_version;
-	__u32 efi_memmap;
-	__u32 efi_memmap_size;
-	__u32 efi_systab_hi;
-	__u32 efi_memmap_hi;
-};
-
-/* The so-called "zeropage" */
-struct boot_params {
-	struct screen_info screen_info;			/* 0x000 */
-	struct apm_bios_info apm_bios_info;		/* 0x040 */
-	__u8  _pad2[12];				/* 0x054 */
-	struct ist_info ist_info;			/* 0x060 */
-	__u8  _pad3[16];				/* 0x070 */
-	__u8  hd0_info[16];	/* obsolete! */		/* 0x080 */
-	__u8  hd1_info[16];	/* obsolete! */		/* 0x090 */
-	struct sys_desc_table sys_desc_table;		/* 0x0a0 */
-	__u8  _pad4[144];				/* 0x0b0 */
-	struct edid_info edid_info;			/* 0x140 */
-	struct efi_info efi_info;			/* 0x1c0 */
-	__u32 alt_mem_k;				/* 0x1e0 */
-	__u32 scratch;		/* Scratch field! */	/* 0x1e4 */
-	__u8  e820_entries;				/* 0x1e8 */
-	__u8  eddbuf_entries;				/* 0x1e9 */
-	__u8  edd_mbr_sig_buf_entries;			/* 0x1ea */
-	__u8  _pad6[6];					/* 0x1eb */
-	struct setup_header hdr;    /* setup header */	/* 0x1f1 */
-	__u8  _pad7[0x290-0x1f1-sizeof(struct setup_header)];
-	__u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX];	/* 0x290 */
-	struct e820entry e820_map[E820MAX];		/* 0x2d0 */
-	__u8  _pad8[48];				/* 0xcd0 */
-	struct edd_info eddbuf[EDDMAXNR];		/* 0xd00 */
-	__u8  _pad9[276];				/* 0xeec */
-} __attribute__((packed));
-
-#endif /* ASM_X86__BOOTPARAM_H */
diff --git a/include/asm-x86/bug.h b/include/asm-x86/bug.h
deleted file mode 100644
index 91ad43a..0000000
--- a/include/asm-x86/bug.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef ASM_X86__BUG_H
-#define ASM_X86__BUG_H
-
-#ifdef CONFIG_BUG
-#define HAVE_ARCH_BUG
-
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-
-#ifdef CONFIG_X86_32
-# define __BUG_C0	"2:\t.long 1b, %c0\n"
-#else
-# define __BUG_C0	"2:\t.quad 1b, %c0\n"
-#endif
-
-#define BUG()							\
-do {								\
-	asm volatile("1:\tud2\n"				\
-		     ".pushsection __bug_table,\"a\"\n"		\
-		     __BUG_C0					\
-		     "\t.word %c1, 0\n"				\
-		     "\t.org 2b+%c2\n"				\
-		     ".popsection"				\
-		     : : "i" (__FILE__), "i" (__LINE__),	\
-		     "i" (sizeof(struct bug_entry)));		\
-	for (;;) ;						\
-} while (0)
-
-#else
-#define BUG()							\
-do {								\
-	asm volatile("ud2");					\
-	for (;;) ;						\
-} while (0)
-#endif
-
-#endif /* !CONFIG_BUG */
-
-#include <asm-generic/bug.h>
-#endif /* ASM_X86__BUG_H */
diff --git a/include/asm-x86/bugs.h b/include/asm-x86/bugs.h
deleted file mode 100644
index dc60498..0000000
--- a/include/asm-x86/bugs.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASM_X86__BUGS_H
-#define ASM_X86__BUGS_H
-
-extern void check_bugs(void);
-
-#if defined(CONFIG_CPU_SUP_INTEL) && defined(CONFIG_X86_32)
-int ppro_with_ram_bug(void);
-#else
-static inline int ppro_with_ram_bug(void) { return 0; }
-#endif
-
-#endif /* ASM_X86__BUGS_H */
diff --git a/include/asm-x86/byteorder.h b/include/asm-x86/byteorder.h
deleted file mode 100644
index 722f27d..0000000
--- a/include/asm-x86/byteorder.h
+++ /dev/null
@@ -1,81 +0,0 @@
-#ifndef ASM_X86__BYTEORDER_H
-#define ASM_X86__BYTEORDER_H
-
-#include <asm/types.h>
-#include <linux/compiler.h>
-
-#ifdef __GNUC__
-
-#ifdef __i386__
-
-static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
-{
-#ifdef CONFIG_X86_BSWAP
-	asm("bswap %0" : "=r" (x) : "0" (x));
-#else
-	asm("xchgb %b0,%h0\n\t"	/* swap lower bytes	*/
-	    "rorl $16,%0\n\t"	/* swap words		*/
-	    "xchgb %b0,%h0"	/* swap higher bytes	*/
-	    : "=q" (x)
-	    : "0" (x));
-#endif
-	return x;
-}
-
-static inline __attribute_const__ __u64 ___arch__swab64(__u64 val)
-{
-	union {
-		struct {
-			__u32 a;
-			__u32 b;
-		} s;
-		__u64 u;
-	} v;
-	v.u = val;
-#ifdef CONFIG_X86_BSWAP
-	asm("bswapl %0 ; bswapl %1 ; xchgl %0,%1"
-	    : "=r" (v.s.a), "=r" (v.s.b)
-	    : "0" (v.s.a), "1" (v.s.b));
-#else
-	v.s.a = ___arch__swab32(v.s.a);
-	v.s.b = ___arch__swab32(v.s.b);
-	asm("xchgl %0,%1"
-	    : "=r" (v.s.a), "=r" (v.s.b)
-	    : "0" (v.s.a), "1" (v.s.b));
-#endif
-	return v.u;
-}
-
-#else /* __i386__ */
-
-static inline __attribute_const__ __u64 ___arch__swab64(__u64 x)
-{
-	asm("bswapq %0"
-	    : "=r" (x)
-	    : "0" (x));
-	return x;
-}
-
-static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
-{
-	asm("bswapl %0"
-	    : "=r" (x)
-	    : "0" (x));
-	return x;
-}
-
-#endif
-
-/* Do not define swab16.  Gcc is smart enough to recognize "C" version and
-   convert it into rotation or exhange.  */
-
-#define __arch__swab64(x) ___arch__swab64(x)
-#define __arch__swab32(x) ___arch__swab32(x)
-
-#define __BYTEORDER_HAS_U64__
-
-#endif /* __GNUC__ */
-
-#include <linux/byteorder/little_endian.h>
-
-#endif /* ASM_X86__BYTEORDER_H */
diff --git a/include/asm-x86/cache.h b/include/asm-x86/cache.h
deleted file mode 100644
index ea3f1cc..0000000
--- a/include/asm-x86/cache.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef ASM_X86__CACHE_H
-#define ASM_X86__CACHE_H
-
-/* L1 cache line size */
-#define L1_CACHE_SHIFT	(CONFIG_X86_L1_CACHE_SHIFT)
-#define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
-
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
-
-#ifdef CONFIG_X86_VSMP
-/* vSMP Internode cacheline shift */
-#define INTERNODE_CACHE_SHIFT (12)
-#ifdef CONFIG_SMP
-#define __cacheline_aligned_in_smp					\
-	__attribute__((__aligned__(1 << (INTERNODE_CACHE_SHIFT))))	\
-	__attribute__((__section__(".data.page_aligned")))
-#endif
-#endif
-
-#endif /* ASM_X86__CACHE_H */
diff --git a/include/asm-x86/cacheflush.h b/include/asm-x86/cacheflush.h
deleted file mode 100644
index 68840ef..0000000
--- a/include/asm-x86/cacheflush.h
+++ /dev/null
@@ -1,118 +0,0 @@
-#ifndef ASM_X86__CACHEFLUSH_H
-#define ASM_X86__CACHEFLUSH_H
-
-/* Keep includes the same across arches.  */
-#include <linux/mm.h>
-
-/* Caches aren't brain-dead on the intel. */
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma, pg)		do { } while (0)
-#define flush_icache_user_range(vma, pg, adr, len)	do { } while (0)
-#define flush_cache_vmap(start, end)		do { } while (0)
-#define flush_cache_vunmap(start, end)		do { } while (0)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
-	memcpy((dst), (src), (len))
-#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
-	memcpy((dst), (src), (len))
-
-#define PG_non_WB				PG_arch_1
-PAGEFLAG(NonWB, non_WB)
-
-/*
- * The set_memory_* API can be used to change various attributes of a virtual
- * address range. The attributes include:
- * Cachability   : UnCached, WriteCombining, WriteBack
- * Executability : eXeutable, NoteXecutable
- * Read/Write    : ReadOnly, ReadWrite
- * Presence      : NotPresent
- *
- * Within a catagory, the attributes are mutually exclusive.
- *
- * The implementation of this API will take care of various aspects that
- * are associated with changing such attributes, such as:
- * - Flushing TLBs
- * - Flushing CPU caches
- * - Making sure aliases of the memory behind the mapping don't violate
- *   coherency rules as defined by the CPU in the system.
- *
- * What this API does not do:
- * - Provide exclusion between various callers - including callers that
- *   operation on other mappings of the same physical page
- * - Restore default attributes when a page is freed
- * - Guarantee that mappings other than the requested one are
- *   in any state, other than that these do not violate rules for
- *   the CPU you have. Do not depend on any effects on other mappings,
- *   CPUs other than the one you have may have more relaxed rules.
- * The caller is required to take care of these.
- */
-
-int _set_memory_uc(unsigned long addr, int numpages);
-int _set_memory_wc(unsigned long addr, int numpages);
-int _set_memory_wb(unsigned long addr, int numpages);
-int set_memory_uc(unsigned long addr, int numpages);
-int set_memory_wc(unsigned long addr, int numpages);
-int set_memory_wb(unsigned long addr, int numpages);
-int set_memory_x(unsigned long addr, int numpages);
-int set_memory_nx(unsigned long addr, int numpages);
-int set_memory_ro(unsigned long addr, int numpages);
-int set_memory_rw(unsigned long addr, int numpages);
-int set_memory_np(unsigned long addr, int numpages);
-int set_memory_4k(unsigned long addr, int numpages);
-
-int set_memory_array_uc(unsigned long *addr, int addrinarray);
-int set_memory_array_wb(unsigned long *addr, int addrinarray);
-
-/*
- * For legacy compatibility with the old APIs, a few functions
- * are provided that work on a "struct page".
- * These functions operate ONLY on the 1:1 kernel mapping of the
- * memory that the struct page represents, and internally just
- * call the set_memory_* function. See the description of the
- * set_memory_* function for more details on conventions.
- *
- * These APIs should be considered *deprecated* and are likely going to
- * be removed in the future.
- * The reason for this is the implicit operation on the 1:1 mapping only,
- * making this not a generally useful API.
- *
- * Specifically, many users of the old APIs had a virtual address,
- * called virt_to_page() or vmalloc_to_page() on that address to
- * get a struct page* that the old API required.
- * To convert these cases, use set_memory_*() on the original
- * virtual address, do not use these functions.
- */
-
-int set_pages_uc(struct page *page, int numpages);
-int set_pages_wb(struct page *page, int numpages);
-int set_pages_x(struct page *page, int numpages);
-int set_pages_nx(struct page *page, int numpages);
-int set_pages_ro(struct page *page, int numpages);
-int set_pages_rw(struct page *page, int numpages);
-
-
-void clflush_cache_range(void *addr, unsigned int size);
-
-#ifdef CONFIG_DEBUG_RODATA
-void mark_rodata_ro(void);
-extern const int rodata_test_data;
-#endif
-
-#ifdef CONFIG_DEBUG_RODATA_TEST
-int rodata_test(void);
-#else
-static inline int rodata_test(void)
-{
-	return 0;
-}
-#endif
-
-#endif /* ASM_X86__CACHEFLUSH_H */
diff --git a/include/asm-x86/calgary.h b/include/asm-x86/calgary.h
deleted file mode 100644
index 933fd27..0000000
--- a/include/asm-x86/calgary.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Derived from include/asm-powerpc/iommu.h
- *
- * Copyright IBM Corporation, 2006-2007
- *
- * Author: Jon Mason <jdmason@us.ibm.com>
- * Author: Muli Ben-Yehuda <muli@il.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef ASM_X86__CALGARY_H
-#define ASM_X86__CALGARY_H
-
-#include <linux/spinlock.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/timer.h>
-#include <asm/types.h>
-
-struct iommu_table {
-	struct cal_chipset_ops *chip_ops; /* chipset specific funcs */
-	unsigned long  it_base;      /* mapped address of tce table */
-	unsigned long  it_hint;      /* Hint for next alloc */
-	unsigned long *it_map;       /* A simple allocation bitmap for now */
-	void __iomem  *bbar;         /* Bridge BAR */
-	u64	       tar_val;      /* Table Address Register */
-	struct timer_list watchdog_timer;
-	spinlock_t     it_lock;      /* Protects it_map */
-	unsigned int   it_size;      /* Size of iommu table in entries */
-	unsigned char  it_busno;     /* Bus number this table belongs to */
-};
-
-struct cal_chipset_ops {
-	void (*handle_quirks)(struct iommu_table *tbl, struct pci_dev *dev);
-	void (*tce_cache_blast)(struct iommu_table *tbl);
-	void (*dump_error_regs)(struct iommu_table *tbl);
-};
-
-#define TCE_TABLE_SIZE_UNSPECIFIED	~0
-#define TCE_TABLE_SIZE_64K		0
-#define TCE_TABLE_SIZE_128K		1
-#define TCE_TABLE_SIZE_256K		2
-#define TCE_TABLE_SIZE_512K		3
-#define TCE_TABLE_SIZE_1M		4
-#define TCE_TABLE_SIZE_2M		5
-#define TCE_TABLE_SIZE_4M		6
-#define TCE_TABLE_SIZE_8M		7
-
-extern int use_calgary;
-
-#ifdef CONFIG_CALGARY_IOMMU
-extern int calgary_iommu_init(void);
-extern void detect_calgary(void);
-#else
-static inline int calgary_iommu_init(void) { return 1; }
-static inline void detect_calgary(void) { return; }
-#endif
-
-#endif /* ASM_X86__CALGARY_H */
diff --git a/include/asm-x86/checksum_32.h b/include/asm-x86/checksum_32.h
deleted file mode 100644
index d041e8c..0000000
--- a/include/asm-x86/checksum_32.h
+++ /dev/null
@@ -1,189 +0,0 @@
-#ifndef ASM_X86__CHECKSUM_32_H
-#define ASM_X86__CHECKSUM_32_H
-
-#include <linux/in6.h>
-
-#include <asm/uaccess.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums, and handles user-space pointer exceptions correctly, when needed.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst,
-					    int len, __wsum sum,
-					    int *src_err_ptr, int *dst_err_ptr);
-
-/*
- *	Note: when you get a NULL pointer exception here this means someone
- *	passed in an incorrect kernel address to one of these functions.
- *
- *	If you use these functions directly please don't forget the
- *	access_ok().
- */
-static inline __wsum csum_partial_copy_nocheck(const void *src, void *dst,
-					       int len, __wsum sum)
-{
-	return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL);
-}
-
-static inline __wsum csum_partial_copy_from_user(const void __user *src,
-						 void *dst,
-						 int len, __wsum sum,
-						 int *err_ptr)
-{
-	might_sleep();
-	return csum_partial_copy_generic((__force void *)src, dst,
-					 len, sum, err_ptr, NULL);
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- *
- *	By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
- *	Arnt Gulbrandsen.
- */
-static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	unsigned int sum;
-
-	asm volatile("movl (%1), %0	;\n"
-		     "subl $4, %2	;\n"
-		     "jbe 2f		;\n"
-		     "addl 4(%1), %0	;\n"
-		     "adcl 8(%1), %0	;\n"
-		     "adcl 12(%1), %0;\n"
-		     "1:	adcl 16(%1), %0	;\n"
-		     "lea 4(%1), %1	;\n"
-		     "decl %2	;\n"
-		     "jne 1b		;\n"
-		     "adcl $0, %0	;\n"
-		     "movl %0, %2	;\n"
-		     "shrl $16, %0	;\n"
-		     "addw %w2, %w0	;\n"
-		     "adcl $0, %0	;\n"
-		     "notl %0	;\n"
-		     "2:		;\n"
-	/* Since the input registers which are loaded with iph and ihl
-	   are modified, we must also specify them as outputs, or gcc
-	   will assume they contain their original values. */
-		     : "=r" (sum), "=r" (iph), "=r" (ihl)
-		     : "1" (iph), "2" (ihl)
-		     : "memory");
-	return (__force __sum16)sum;
-}
-
-/*
- *	Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
-	asm("addl %1, %0		;\n"
-	    "adcl $0xffff, %0	;\n"
-	    : "=r" (sum)
-	    : "r" ((__force u32)sum << 16),
-	      "0" ((__force u32)sum & 0xffff0000));
-	return (__force __sum16)(~(__force u32)sum >> 16);
-}
-
-static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto,
-					__wsum sum)
-{
-	asm("addl %1, %0	;\n"
-	    "adcl %2, %0	;\n"
-	    "adcl %3, %0	;\n"
-	    "adcl $0, %0	;\n"
-	    : "=r" (sum)
-	    : "g" (daddr), "g"(saddr),
-	      "g" ((len + proto) << 8), "0" (sum));
-	return sum;
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto,
-					__wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
-    return csum_fold(csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
-				      const struct in6_addr *daddr,
-				      __u32 len, unsigned short proto,
-				      __wsum sum)
-{
-	asm("addl 0(%1), %0	;\n"
-	    "adcl 4(%1), %0	;\n"
-	    "adcl 8(%1), %0	;\n"
-	    "adcl 12(%1), %0	;\n"
-	    "adcl 0(%2), %0	;\n"
-	    "adcl 4(%2), %0	;\n"
-	    "adcl 8(%2), %0	;\n"
-	    "adcl 12(%2), %0	;\n"
-	    "adcl %3, %0	;\n"
-	    "adcl %4, %0	;\n"
-	    "adcl $0, %0	;\n"
-	    : "=&r" (sum)
-	    : "r" (saddr), "r" (daddr),
-	      "r" (htonl(len)), "r" (htonl(proto)), "0" (sum));
-
-	return csum_fold(sum);
-}
-
-/*
- *	Copy and checksum to user
- */
-#define HAVE_CSUM_COPY_USER
-static inline __wsum csum_and_copy_to_user(const void *src,
-					   void __user *dst,
-					   int len, __wsum sum,
-					   int *err_ptr)
-{
-	might_sleep();
-	if (access_ok(VERIFY_WRITE, dst, len))
-		return csum_partial_copy_generic(src, (__force void *)dst,
-						 len, sum, NULL, err_ptr);
-
-	if (len)
-		*err_ptr = -EFAULT;
-
-	return (__force __wsum)-1; /* invalid checksum */
-}
-
-#endif /* ASM_X86__CHECKSUM_32_H */
diff --git a/include/asm-x86/checksum_64.h b/include/asm-x86/checksum_64.h
deleted file mode 100644
index 110f403..0000000
--- a/include/asm-x86/checksum_64.h
+++ /dev/null
@@ -1,191 +0,0 @@
-#ifndef ASM_X86__CHECKSUM_64_H
-#define ASM_X86__CHECKSUM_64_H
-
-/*
- * Checksums for x86-64
- * Copyright 2002 by Andi Kleen, SuSE Labs
- * with some code from asm-x86/checksum.h
- */
-
-#include <linux/compiler.h>
-#include <asm/uaccess.h>
-#include <asm/byteorder.h>
-
-/**
- * csum_fold - Fold and invert a 32bit checksum.
- * sum: 32bit unfolded sum
- *
- * Fold a 32bit running checksum to 16bit and invert it. This is usually
- * the last step before putting a checksum into a packet.
- * Make sure not to mix with 64bit checksums.
- */
-static inline __sum16 csum_fold(__wsum sum)
-{
-	asm("  addl %1,%0\n"
-	    "  adcl $0xffff,%0"
-	    : "=r" (sum)
-	    : "r" ((__force u32)sum << 16),
-	      "0" ((__force u32)sum & 0xffff0000));
-	return (__force __sum16)(~(__force u32)sum >> 16);
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- *
- *	By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
- *	Arnt Gulbrandsen.
- */
-
-/**
- * ip_fast_csum - Compute the IPv4 header checksum efficiently.
- * iph: ipv4 header
- * ihl: length of header / 4
- */
-static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	unsigned int sum;
-
-	asm("  movl (%1), %0\n"
-	    "  subl $4, %2\n"
-	    "  jbe 2f\n"
-	    "  addl 4(%1), %0\n"
-	    "  adcl 8(%1), %0\n"
-	    "  adcl 12(%1), %0\n"
-	    "1: adcl 16(%1), %0\n"
-	    "  lea 4(%1), %1\n"
-	    "  decl %2\n"
-	    "  jne	1b\n"
-	    "  adcl $0, %0\n"
-	    "  movl %0, %2\n"
-	    "  shrl $16, %0\n"
-	    "  addw %w2, %w0\n"
-	    "  adcl $0, %0\n"
-	    "  notl %0\n"
-	    "2:"
-	/* Since the input registers which are loaded with iph and ihl
-	   are modified, we must also specify them as outputs, or gcc
-	   will assume they contain their original values. */
-	    : "=r" (sum), "=r" (iph), "=r" (ihl)
-	    : "1" (iph), "2" (ihl)
-	    : "memory");
-	return (__force __sum16)sum;
-}
-
-/**
- * csum_tcpup_nofold - Compute an IPv4 pseudo header checksum.
- * @saddr: source address
- * @daddr: destination address
- * @len: length of packet
- * @proto: ip protocol of packet
- * @sum: initial sum to be added in (32bit unfolded)
- *
- * Returns the pseudo header checksum the input data. Result is
- * 32bit unfolded.
- */
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		   unsigned short proto, __wsum sum)
-{
-	asm("  addl %1, %0\n"
-	    "  adcl %2, %0\n"
-	    "  adcl %3, %0\n"
-	    "  adcl $0, %0\n"
-	    : "=r" (sum)
-	    : "g" (daddr), "g" (saddr),
-	      "g" ((len + proto)<<8), "0" (sum));
-	return sum;
-}
-
-
-/**
- * csum_tcpup_magic - Compute an IPv4 pseudo header checksum.
- * @saddr: source address
- * @daddr: destination address
- * @len: length of packet
- * @proto: ip protocol of packet
- * @sum: initial sum to be added in (32bit unfolded)
- *
- * Returns the 16bit pseudo header checksum the input data already
- * complemented and ready to be filled in.
- */
-static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-/**
- * csum_partial - Compute an internet checksum.
- * @buff: buffer to be checksummed
- * @len: length of buffer.
- * @sum: initial sum to be added in (32bit unfolded)
- *
- * Returns the 32bit unfolded internet checksum of the buffer.
- * Before filling it in it needs to be csum_fold()'ed.
- * buff should be aligned to a 64bit boundary if possible.
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-#define  _HAVE_ARCH_COPY_AND_CSUM_FROM_USER 1
-#define HAVE_CSUM_COPY_USER 1
-
-
-/* Do not call this directly. Use the wrappers below */
-extern __wsum csum_partial_copy_generic(const void *src, const void *dst,
-					int len, __wsum sum,
-					int *src_err_ptr, int *dst_err_ptr);
-
-
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
-					  int len, __wsum isum, int *errp);
-extern __wsum csum_partial_copy_to_user(const void *src, void __user *dst,
-					int len, __wsum isum, int *errp);
-extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
-					int len, __wsum sum);
-
-/* Old names. To be removed. */
-#define csum_and_copy_to_user csum_partial_copy_to_user
-#define csum_and_copy_from_user csum_partial_copy_from_user
-
-/**
- * ip_compute_csum - Compute an 16bit IP checksum.
- * @buff: buffer address.
- * @len: length of buffer.
- *
- * Returns the 16bit folded/inverted checksum of the passed buffer.
- * Ready to fill in.
- */
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-/**
- * csum_ipv6_magic - Compute checksum of an IPv6 pseudo header.
- * @saddr: source address
- * @daddr: destination address
- * @len: length of packet
- * @proto: protocol of packet
- * @sum: initial sum (32bit unfolded) to be added in
- *
- * Computes an IPv6 pseudo header checksum. This sum is added the checksum
- * into UDP/TCP packets and contains some link layer information.
- * Returns the unfolded 32bit checksum.
- */
-
-struct in6_addr;
-
-#define _HAVE_ARCH_IPV6_CSUM 1
-extern __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
-		__u32 len, unsigned short proto, __wsum sum);
-
-static inline unsigned add32_with_carry(unsigned a, unsigned b)
-{
-	asm("addl %2,%0\n\t"
-	    "adcl $0,%0"
-	    : "=r" (a)
-	    : "0" (a), "r" (b));
-	return a;
-}
-
-#endif /* ASM_X86__CHECKSUM_64_H */
diff --git a/include/asm-x86/cmpxchg_32.h b/include/asm-x86/cmpxchg_32.h
deleted file mode 100644
index 0622e45..0000000
--- a/include/asm-x86/cmpxchg_32.h
+++ /dev/null
@@ -1,344 +0,0 @@
-#ifndef ASM_X86__CMPXCHG_32_H
-#define ASM_X86__CMPXCHG_32_H
-
-#include <linux/bitops.h> /* for LOCK_PREFIX */
-
-/*
- * Note: if you use set64_bit(), __cmpxchg64(), or their variants, you
- *       you need to test for the feature in boot_cpu_data.
- */
-
-#define xchg(ptr, v)							\
-	((__typeof__(*(ptr)))__xchg((unsigned long)(v), (ptr), sizeof(*(ptr))))
-
-struct __xchg_dummy {
-	unsigned long a[100];
-};
-#define __xg(x) ((struct __xchg_dummy *)(x))
-
-/*
- * The semantics of XCHGCMP8B are a bit strange, this is why
- * there is a loop and the loading of %%eax and %%edx has to
- * be inside. This inlines well in most cases, the cached
- * cost is around ~38 cycles. (in the future we might want
- * to do an SIMD/3DNOW!/MMX/FPU 64-bit store here, but that
- * might have an implicit FPU-save as a cost, so it's not
- * clear which path to go.)
- *
- * cmpxchg8b must be used with the lock prefix here to allow
- * the instruction to be executed atomically, see page 3-102
- * of the instruction set reference 24319102.pdf. We need
- * the reader side to see the coherent 64bit value.
- */
-static inline void __set_64bit(unsigned long long *ptr,
-			       unsigned int low, unsigned int high)
-{
-	asm volatile("\n1:\t"
-		     "movl (%0), %%eax\n\t"
-		     "movl 4(%0), %%edx\n\t"
-		     LOCK_PREFIX "cmpxchg8b (%0)\n\t"
-		     "jnz 1b"
-		     : /* no outputs */
-		     : "D"(ptr),
-		       "b"(low),
-		       "c"(high)
-		     : "ax", "dx", "memory");
-}
-
-static inline void __set_64bit_constant(unsigned long long *ptr,
-					unsigned long long value)
-{
-	__set_64bit(ptr, (unsigned int)value, (unsigned int)(value >> 32));
-}
-
-#define ll_low(x)	*(((unsigned int *)&(x)) + 0)
-#define ll_high(x)	*(((unsigned int *)&(x)) + 1)
-
-static inline void __set_64bit_var(unsigned long long *ptr,
-				   unsigned long long value)
-{
-	__set_64bit(ptr, ll_low(value), ll_high(value));
-}
-
-#define set_64bit(ptr, value)			\
-	(__builtin_constant_p((value))		\
-	 ? __set_64bit_constant((ptr), (value))	\
-	 : __set_64bit_var((ptr), (value)))
-
-#define _set_64bit(ptr, value)						\
-	(__builtin_constant_p(value)					\
-	 ? __set_64bit(ptr, (unsigned int)(value),			\
-		       (unsigned int)((value) >> 32))			\
-	 : __set_64bit(ptr, ll_low((value)), ll_high((value))))
-
-/*
- * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
- * Note 2: xchg has side effect, so that attribute volatile is necessary,
- *	  but generally the primitive is invalid, *ptr is output argument. --ANK
- */
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
-				   int size)
-{
-	switch (size) {
-	case 1:
-		asm volatile("xchgb %b0,%1"
-			     : "=q" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	case 2:
-		asm volatile("xchgw %w0,%1"
-			     : "=r" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	case 4:
-		asm volatile("xchgl %0,%1"
-			     : "=r" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	}
-	return x;
-}
-
-/*
- * Atomic compare and exchange.  Compare OLD with MEM, if identical,
- * store NEW in MEM.  Return the initial value in MEM.  Success is
- * indicated by comparing RETURN with OLD.
- */
-
-#ifdef CONFIG_X86_CMPXCHG
-#define __HAVE_ARCH_CMPXCHG 1
-#define cmpxchg(ptr, o, n)						\
-	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),	\
-				       (unsigned long)(n),		\
-				       sizeof(*(ptr))))
-#define sync_cmpxchg(ptr, o, n)						\
-	((__typeof__(*(ptr)))__sync_cmpxchg((ptr), (unsigned long)(o),	\
-					    (unsigned long)(n),		\
-					    sizeof(*(ptr))))
-#define cmpxchg_local(ptr, o, n)					\
-	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
-					     (unsigned long)(n),	\
-					     sizeof(*(ptr))))
-#endif
-
-#ifdef CONFIG_X86_CMPXCHG64
-#define cmpxchg64(ptr, o, n)						\
-	((__typeof__(*(ptr)))__cmpxchg64((ptr), (unsigned long long)(o), \
-					 (unsigned long long)(n)))
-#define cmpxchg64_local(ptr, o, n)					\
-	((__typeof__(*(ptr)))__cmpxchg64_local((ptr), (unsigned long long)(o), \
-					       (unsigned long long)(n)))
-#endif
-
-static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
-				      unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile(LOCK_PREFIX "cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile(LOCK_PREFIX "cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile(LOCK_PREFIX "cmpxchgl %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
-
-/*
- * Always use locked operations when touching memory shared with a
- * hypervisor, since the system may be SMP even if the guest kernel
- * isn't.
- */
-static inline unsigned long __sync_cmpxchg(volatile void *ptr,
-					   unsigned long old,
-					   unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile("lock; cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile("lock; cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile("lock; cmpxchgl %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
-
-static inline unsigned long __cmpxchg_local(volatile void *ptr,
-					    unsigned long old,
-					    unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile("cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile("cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile("cmpxchgl %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
-
-static inline unsigned long long __cmpxchg64(volatile void *ptr,
-					     unsigned long long old,
-					     unsigned long long new)
-{
-	unsigned long long prev;
-	asm volatile(LOCK_PREFIX "cmpxchg8b %3"
-		     : "=A"(prev)
-		     : "b"((unsigned long)new),
-		       "c"((unsigned long)(new >> 32)),
-		       "m"(*__xg(ptr)),
-		       "0"(old)
-		     : "memory");
-	return prev;
-}
-
-static inline unsigned long long __cmpxchg64_local(volatile void *ptr,
-						   unsigned long long old,
-						   unsigned long long new)
-{
-	unsigned long long prev;
-	asm volatile("cmpxchg8b %3"
-		     : "=A"(prev)
-		     : "b"((unsigned long)new),
-		       "c"((unsigned long)(new >> 32)),
-		       "m"(*__xg(ptr)),
-		       "0"(old)
-		     : "memory");
-	return prev;
-}
-
-#ifndef CONFIG_X86_CMPXCHG
-/*
- * Building a kernel capable running on 80386. It may be necessary to
- * simulate the cmpxchg on the 80386 CPU. For that purpose we define
- * a function for each of the sizes we support.
- */
-
-extern unsigned long cmpxchg_386_u8(volatile void *, u8, u8);
-extern unsigned long cmpxchg_386_u16(volatile void *, u16, u16);
-extern unsigned long cmpxchg_386_u32(volatile void *, u32, u32);
-
-static inline unsigned long cmpxchg_386(volatile void *ptr, unsigned long old,
-					unsigned long new, int size)
-{
-	switch (size) {
-	case 1:
-		return cmpxchg_386_u8(ptr, old, new);
-	case 2:
-		return cmpxchg_386_u16(ptr, old, new);
-	case 4:
-		return cmpxchg_386_u32(ptr, old, new);
-	}
-	return old;
-}
-
-#define cmpxchg(ptr, o, n)						\
-({									\
-	__typeof__(*(ptr)) __ret;					\
-	if (likely(boot_cpu_data.x86 > 3))				\
-		__ret = (__typeof__(*(ptr)))__cmpxchg((ptr),		\
-				(unsigned long)(o), (unsigned long)(n),	\
-				sizeof(*(ptr)));			\
-	else								\
-		__ret = (__typeof__(*(ptr)))cmpxchg_386((ptr),		\
-				(unsigned long)(o), (unsigned long)(n),	\
-				sizeof(*(ptr)));			\
-	__ret;								\
-})
-#define cmpxchg_local(ptr, o, n)					\
-({									\
-	__typeof__(*(ptr)) __ret;					\
-	if (likely(boot_cpu_data.x86 > 3))				\
-		__ret = (__typeof__(*(ptr)))__cmpxchg_local((ptr),	\
-				(unsigned long)(o), (unsigned long)(n),	\
-				sizeof(*(ptr)));			\
-	else								\
-		__ret = (__typeof__(*(ptr)))cmpxchg_386((ptr),		\
-				(unsigned long)(o), (unsigned long)(n),	\
-				sizeof(*(ptr)));			\
-	__ret;								\
-})
-#endif
-
-#ifndef CONFIG_X86_CMPXCHG64
-/*
- * Building a kernel capable running on 80386 and 80486. It may be necessary
- * to simulate the cmpxchg8b on the 80386 and 80486 CPU.
- */
-
-extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64);
-
-#define cmpxchg64(ptr, o, n)						\
-({									\
-	__typeof__(*(ptr)) __ret;					\
-	if (likely(boot_cpu_data.x86 > 4))				\
-		__ret = (__typeof__(*(ptr)))__cmpxchg64((ptr),		\
-				(unsigned long long)(o),		\
-				(unsigned long long)(n));		\
-	else								\
-		__ret = (__typeof__(*(ptr)))cmpxchg_486_u64((ptr),	\
-				(unsigned long long)(o),		\
-				(unsigned long long)(n));		\
-	__ret;								\
-})
-#define cmpxchg64_local(ptr, o, n)					\
-({									\
-	__typeof__(*(ptr)) __ret;					\
-	if (likely(boot_cpu_data.x86 > 4))				\
-		__ret = (__typeof__(*(ptr)))__cmpxchg64_local((ptr),	\
-				(unsigned long long)(o),		\
-				(unsigned long long)(n));		\
-	else								\
-		__ret = (__typeof__(*(ptr)))cmpxchg_486_u64((ptr),	\
-				(unsigned long long)(o),		\
-				(unsigned long long)(n));		\
-	__ret;								\
-})
-
-#endif
-
-#endif /* ASM_X86__CMPXCHG_32_H */
diff --git a/include/asm-x86/cmpxchg_64.h b/include/asm-x86/cmpxchg_64.h
deleted file mode 100644
index 63c1a5e..0000000
--- a/include/asm-x86/cmpxchg_64.h
+++ /dev/null
@@ -1,185 +0,0 @@
-#ifndef ASM_X86__CMPXCHG_64_H
-#define ASM_X86__CMPXCHG_64_H
-
-#include <asm/alternative.h> /* Provides LOCK_PREFIX */
-
-#define xchg(ptr, v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v), \
-						 (ptr), sizeof(*(ptr))))
-
-#define __xg(x) ((volatile long *)(x))
-
-static inline void set_64bit(volatile unsigned long *ptr, unsigned long val)
-{
-	*ptr = val;
-}
-
-#define _set_64bit set_64bit
-
-/*
- * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
- * Note 2: xchg has side effect, so that attribute volatile is necessary,
- *	  but generally the primitive is invalid, *ptr is output argument. --ANK
- */
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
-				   int size)
-{
-	switch (size) {
-	case 1:
-		asm volatile("xchgb %b0,%1"
-			     : "=q" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	case 2:
-		asm volatile("xchgw %w0,%1"
-			     : "=r" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	case 4:
-		asm volatile("xchgl %k0,%1"
-			     : "=r" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	case 8:
-		asm volatile("xchgq %0,%1"
-			     : "=r" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	}
-	return x;
-}
-
-/*
- * Atomic compare and exchange.  Compare OLD with MEM, if identical,
- * store NEW in MEM.  Return the initial value in MEM.  Success is
- * indicated by comparing RETURN with OLD.
- */
-
-#define __HAVE_ARCH_CMPXCHG 1
-
-static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
-				      unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile(LOCK_PREFIX "cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile(LOCK_PREFIX "cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile(LOCK_PREFIX "cmpxchgl %k1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 8:
-		asm volatile(LOCK_PREFIX "cmpxchgq %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
-
-/*
- * Always use locked operations when touching memory shared with a
- * hypervisor, since the system may be SMP even if the guest kernel
- * isn't.
- */
-static inline unsigned long __sync_cmpxchg(volatile void *ptr,
-					   unsigned long old,
-					   unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile("lock; cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile("lock; cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile("lock; cmpxchgl %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
-
-static inline unsigned long __cmpxchg_local(volatile void *ptr,
-					    unsigned long old,
-					    unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile("cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile("cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile("cmpxchgl %k1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 8:
-		asm volatile("cmpxchgq %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
-
-#define cmpxchg(ptr, o, n)						\
-	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),	\
-				       (unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64(ptr, o, n)						\
-({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg((ptr), (o), (n));					\
-})
-#define cmpxchg_local(ptr, o, n)					\
-	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
-					     (unsigned long)(n),	\
-					     sizeof(*(ptr))))
-#define sync_cmpxchg(ptr, o, n)						\
-	((__typeof__(*(ptr)))__sync_cmpxchg((ptr), (unsigned long)(o),	\
-					    (unsigned long)(n),		\
-					    sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n)					\
-({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg_local((ptr), (o), (n));					\
-})
-
-#endif /* ASM_X86__CMPXCHG_64_H */
diff --git a/include/asm-x86/compat.h b/include/asm-x86/compat.h
deleted file mode 100644
index 6732b15..0000000
--- a/include/asm-x86/compat.h
+++ /dev/null
@@ -1,218 +0,0 @@
-#ifndef ASM_X86__COMPAT_H
-#define ASM_X86__COMPAT_H
-
-/*
- * Architecture specific compatibility types
- */
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <asm/user32.h>
-
-#define COMPAT_USER_HZ	100
-
-typedef u32		compat_size_t;
-typedef s32		compat_ssize_t;
-typedef s32		compat_time_t;
-typedef s32		compat_clock_t;
-typedef s32		compat_pid_t;
-typedef u16		__compat_uid_t;
-typedef u16		__compat_gid_t;
-typedef u32		__compat_uid32_t;
-typedef u32		__compat_gid32_t;
-typedef u16		compat_mode_t;
-typedef u32		compat_ino_t;
-typedef u16		compat_dev_t;
-typedef s32		compat_off_t;
-typedef s64		compat_loff_t;
-typedef u16		compat_nlink_t;
-typedef u16		compat_ipc_pid_t;
-typedef s32		compat_daddr_t;
-typedef u32		compat_caddr_t;
-typedef __kernel_fsid_t	compat_fsid_t;
-typedef s32		compat_timer_t;
-typedef s32		compat_key_t;
-
-typedef s32		compat_int_t;
-typedef s32		compat_long_t;
-typedef s64 __attribute__((aligned(4))) compat_s64;
-typedef u32		compat_uint_t;
-typedef u32		compat_ulong_t;
-typedef u64 __attribute__((aligned(4))) compat_u64;
-
-struct compat_timespec {
-	compat_time_t	tv_sec;
-	s32		tv_nsec;
-};
-
-struct compat_timeval {
-	compat_time_t	tv_sec;
-	s32		tv_usec;
-};
-
-struct compat_stat {
-	compat_dev_t	st_dev;
-	u16		__pad1;
-	compat_ino_t	st_ino;
-	compat_mode_t	st_mode;
-	compat_nlink_t	st_nlink;
-	__compat_uid_t	st_uid;
-	__compat_gid_t	st_gid;
-	compat_dev_t	st_rdev;
-	u16		__pad2;
-	u32		st_size;
-	u32		st_blksize;
-	u32		st_blocks;
-	u32		st_atime;
-	u32		st_atime_nsec;
-	u32		st_mtime;
-	u32		st_mtime_nsec;
-	u32		st_ctime;
-	u32		st_ctime_nsec;
-	u32		__unused4;
-	u32		__unused5;
-};
-
-struct compat_flock {
-	short		l_type;
-	short		l_whence;
-	compat_off_t	l_start;
-	compat_off_t	l_len;
-	compat_pid_t	l_pid;
-};
-
-#define F_GETLK64	12	/*  using 'struct flock64' */
-#define F_SETLK64	13
-#define F_SETLKW64	14
-
-/*
- * IA32 uses 4 byte alignment for 64 bit quantities,
- * so we need to pack this structure.
- */
-struct compat_flock64 {
-	short		l_type;
-	short		l_whence;
-	compat_loff_t	l_start;
-	compat_loff_t	l_len;
-	compat_pid_t	l_pid;
-} __attribute__((packed));
-
-struct compat_statfs {
-	int		f_type;
-	int		f_bsize;
-	int		f_blocks;
-	int		f_bfree;
-	int		f_bavail;
-	int		f_files;
-	int		f_ffree;
-	compat_fsid_t	f_fsid;
-	int		f_namelen;	/* SunOS ignores this field. */
-	int		f_frsize;
-	int		f_spare[5];
-};
-
-#define COMPAT_RLIM_OLD_INFINITY	0x7fffffff
-#define COMPAT_RLIM_INFINITY		0xffffffff
-
-typedef u32		compat_old_sigset_t;	/* at least 32 bits */
-
-#define _COMPAT_NSIG		64
-#define _COMPAT_NSIG_BPW	32
-
-typedef u32               compat_sigset_word;
-
-#define COMPAT_OFF_T_MAX	0x7fffffff
-#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
-
-struct compat_ipc64_perm {
-	compat_key_t key;
-	__compat_uid32_t uid;
-	__compat_gid32_t gid;
-	__compat_uid32_t cuid;
-	__compat_gid32_t cgid;
-	unsigned short mode;
-	unsigned short __pad1;
-	unsigned short seq;
-	unsigned short __pad2;
-	compat_ulong_t unused1;
-	compat_ulong_t unused2;
-};
-
-struct compat_semid64_ds {
-	struct compat_ipc64_perm sem_perm;
-	compat_time_t  sem_otime;
-	compat_ulong_t __unused1;
-	compat_time_t  sem_ctime;
-	compat_ulong_t __unused2;
-	compat_ulong_t sem_nsems;
-	compat_ulong_t __unused3;
-	compat_ulong_t __unused4;
-};
-
-struct compat_msqid64_ds {
-	struct compat_ipc64_perm msg_perm;
-	compat_time_t  msg_stime;
-	compat_ulong_t __unused1;
-	compat_time_t  msg_rtime;
-	compat_ulong_t __unused2;
-	compat_time_t  msg_ctime;
-	compat_ulong_t __unused3;
-	compat_ulong_t msg_cbytes;
-	compat_ulong_t msg_qnum;
-	compat_ulong_t msg_qbytes;
-	compat_pid_t   msg_lspid;
-	compat_pid_t   msg_lrpid;
-	compat_ulong_t __unused4;
-	compat_ulong_t __unused5;
-};
-
-struct compat_shmid64_ds {
-	struct compat_ipc64_perm shm_perm;
-	compat_size_t  shm_segsz;
-	compat_time_t  shm_atime;
-	compat_ulong_t __unused1;
-	compat_time_t  shm_dtime;
-	compat_ulong_t __unused2;
-	compat_time_t  shm_ctime;
-	compat_ulong_t __unused3;
-	compat_pid_t   shm_cpid;
-	compat_pid_t   shm_lpid;
-	compat_ulong_t shm_nattch;
-	compat_ulong_t __unused4;
-	compat_ulong_t __unused5;
-};
-
-/*
- * The type of struct elf_prstatus.pr_reg in compatible core dumps.
- */
-typedef struct user_regs_struct32 compat_elf_gregset_t;
-
-/*
- * A pointer passed in from user mode. This should not
- * be used for syscall parameters, just declare them
- * as pointers because the syscall entry code will have
- * appropriately converted them already.
- */
-typedef	u32		compat_uptr_t;
-
-static inline void __user *compat_ptr(compat_uptr_t uptr)
-{
-	return (void __user *)(unsigned long)uptr;
-}
-
-static inline compat_uptr_t ptr_to_compat(void __user *uptr)
-{
-	return (u32)(unsigned long)uptr;
-}
-
-static inline void __user *compat_alloc_user_space(long len)
-{
-	struct pt_regs *regs = task_pt_regs(current);
-	return (void __user *)regs->sp - len;
-}
-
-static inline int is_compat_task(void)
-{
-	return current_thread_info()->status & TS_COMPAT;
-}
-
-#endif /* ASM_X86__COMPAT_H */
diff --git a/include/asm-x86/cpu.h b/include/asm-x86/cpu.h
deleted file mode 100644
index 83a1150..0000000
--- a/include/asm-x86/cpu.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef ASM_X86__CPU_H
-#define ASM_X86__CPU_H
-
-#include <linux/device.h>
-#include <linux/cpu.h>
-#include <linux/topology.h>
-#include <linux/nodemask.h>
-#include <linux/percpu.h>
-
-struct x86_cpu {
-	struct cpu cpu;
-};
-
-#ifdef CONFIG_HOTPLUG_CPU
-extern int arch_register_cpu(int num);
-extern void arch_unregister_cpu(int);
-#endif
-
-DECLARE_PER_CPU(int, cpu_state);
-#endif /* ASM_X86__CPU_H */
diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h
deleted file mode 100644
index adfeae6..0000000
--- a/include/asm-x86/cpufeature.h
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Defines x86 CPU feature bits
- */
-#ifndef ASM_X86__CPUFEATURE_H
-#define ASM_X86__CPUFEATURE_H
-
-#include <asm/required-features.h>
-
-#define NCAPINTS	9	/* N 32-bit words worth of info */
-
-/*
- * Note: If the comment begins with a quoted string, that string is used
- * in /proc/cpuinfo instead of the macro name.  If the string is "",
- * this feature bit is not displayed in /proc/cpuinfo at all.
- */
-
-/* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */
-#define X86_FEATURE_FPU		(0*32+ 0) /* Onboard FPU */
-#define X86_FEATURE_VME		(0*32+ 1) /* Virtual Mode Extensions */
-#define X86_FEATURE_DE		(0*32+ 2) /* Debugging Extensions */
-#define X86_FEATURE_PSE		(0*32+ 3) /* Page Size Extensions */
-#define X86_FEATURE_TSC		(0*32+ 4) /* Time Stamp Counter */
-#define X86_FEATURE_MSR		(0*32+ 5) /* Model-Specific Registers */
-#define X86_FEATURE_PAE		(0*32+ 6) /* Physical Address Extensions */
-#define X86_FEATURE_MCE		(0*32+ 7) /* Machine Check Architecture */
-#define X86_FEATURE_CX8		(0*32+ 8) /* CMPXCHG8 instruction */
-#define X86_FEATURE_APIC	(0*32+ 9) /* Onboard APIC */
-#define X86_FEATURE_SEP		(0*32+11) /* SYSENTER/SYSEXIT */
-#define X86_FEATURE_MTRR	(0*32+12) /* Memory Type Range Registers */
-#define X86_FEATURE_PGE		(0*32+13) /* Page Global Enable */
-#define X86_FEATURE_MCA		(0*32+14) /* Machine Check Architecture */
-#define X86_FEATURE_CMOV	(0*32+15) /* CMOV instructions */
-					  /* (plus FCMOVcc, FCOMI with FPU) */
-#define X86_FEATURE_PAT		(0*32+16) /* Page Attribute Table */
-#define X86_FEATURE_PSE36	(0*32+17) /* 36-bit PSEs */
-#define X86_FEATURE_PN		(0*32+18) /* Processor serial number */
-#define X86_FEATURE_CLFLSH	(0*32+19) /* "clflush" CLFLUSH instruction */
-#define X86_FEATURE_DS		(0*32+21) /* "dts" Debug Store */
-#define X86_FEATURE_ACPI	(0*32+22) /* ACPI via MSR */
-#define X86_FEATURE_MMX		(0*32+23) /* Multimedia Extensions */
-#define X86_FEATURE_FXSR	(0*32+24) /* FXSAVE/FXRSTOR, CR4.OSFXSR */
-#define X86_FEATURE_XMM		(0*32+25) /* "sse" */
-#define X86_FEATURE_XMM2	(0*32+26) /* "sse2" */
-#define X86_FEATURE_SELFSNOOP	(0*32+27) /* "ss" CPU self snoop */
-#define X86_FEATURE_HT		(0*32+28) /* Hyper-Threading */
-#define X86_FEATURE_ACC		(0*32+29) /* "tm" Automatic clock control */
-#define X86_FEATURE_IA64	(0*32+30) /* IA-64 processor */
-#define X86_FEATURE_PBE		(0*32+31) /* Pending Break Enable */
-
-/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
-/* Don't duplicate feature flags which are redundant with Intel! */
-#define X86_FEATURE_SYSCALL	(1*32+11) /* SYSCALL/SYSRET */
-#define X86_FEATURE_MP		(1*32+19) /* MP Capable. */
-#define X86_FEATURE_NX		(1*32+20) /* Execute Disable */
-#define X86_FEATURE_MMXEXT	(1*32+22) /* AMD MMX extensions */
-#define X86_FEATURE_FXSR_OPT	(1*32+25) /* FXSAVE/FXRSTOR optimizations */
-#define X86_FEATURE_GBPAGES	(1*32+26) /* "pdpe1gb" GB pages */
-#define X86_FEATURE_RDTSCP	(1*32+27) /* RDTSCP */
-#define X86_FEATURE_LM		(1*32+29) /* Long Mode (x86-64) */
-#define X86_FEATURE_3DNOWEXT	(1*32+30) /* AMD 3DNow! extensions */
-#define X86_FEATURE_3DNOW	(1*32+31) /* 3DNow! */
-
-/* Transmeta-defined CPU features, CPUID level 0x80860001, word 2 */
-#define X86_FEATURE_RECOVERY	(2*32+ 0) /* CPU in recovery mode */
-#define X86_FEATURE_LONGRUN	(2*32+ 1) /* Longrun power control */
-#define X86_FEATURE_LRTI	(2*32+ 3) /* LongRun table interface */
-
-/* Other features, Linux-defined mapping, word 3 */
-/* This range is used for feature bits which conflict or are synthesized */
-#define X86_FEATURE_CXMMX	(3*32+ 0) /* Cyrix MMX extensions */
-#define X86_FEATURE_K6_MTRR	(3*32+ 1) /* AMD K6 nonstandard MTRRs */
-#define X86_FEATURE_CYRIX_ARR	(3*32+ 2) /* Cyrix ARRs (= MTRRs) */
-#define X86_FEATURE_CENTAUR_MCR	(3*32+ 3) /* Centaur MCRs (= MTRRs) */
-/* cpu types for specific tunings: */
-#define X86_FEATURE_K8		(3*32+ 4) /* "" Opteron, Athlon64 */
-#define X86_FEATURE_K7		(3*32+ 5) /* "" Athlon */
-#define X86_FEATURE_P3		(3*32+ 6) /* "" P3 */
-#define X86_FEATURE_P4		(3*32+ 7) /* "" P4 */
-#define X86_FEATURE_CONSTANT_TSC (3*32+ 8) /* TSC ticks at a constant rate */
-#define X86_FEATURE_UP		(3*32+ 9) /* smp kernel running on up */
-#define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* "" FXSAVE leaks FOP/FIP/FOP */
-#define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */
-#define X86_FEATURE_NOPL	(3*32+20) /* The NOPL (0F 1F) instructions */
-#define X86_FEATURE_PEBS	(3*32+12) /* Precise-Event Based Sampling */
-#define X86_FEATURE_BTS		(3*32+13) /* Branch Trace Store */
-#define X86_FEATURE_SYSCALL32	(3*32+14) /* "" syscall in ia32 userspace */
-#define X86_FEATURE_SYSENTER32	(3*32+15) /* "" sysenter in ia32 userspace */
-#define X86_FEATURE_REP_GOOD	(3*32+16) /* rep microcode works well */
-#define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* "" Mfence synchronizes RDTSC */
-#define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* "" Lfence synchronizes RDTSC */
-#define X86_FEATURE_11AP	(3*32+19) /* "" Bad local APIC aka 11AP */
-#define X86_FEATURE_NOPL	(3*32+20) /* The NOPL (0F 1F) instructions */
-#define X86_FEATURE_AMDC1E	(3*32+21) /* AMD C1E detected */
-#define X86_FEATURE_XTOPOLOGY	(3*32+21) /* cpu topology enum extensions */
-
-/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
-#define X86_FEATURE_XMM3	(4*32+ 0) /* "pni" SSE-3 */
-#define X86_FEATURE_PCLMULQDQ	(4*32+ 1) /* PCLMULQDQ instruction */
-#define X86_FEATURE_DTES64	(4*32+ 2) /* 64-bit Debug Store */
-#define X86_FEATURE_MWAIT	(4*32+ 3) /* "monitor" Monitor/Mwait support */
-#define X86_FEATURE_DSCPL	(4*32+ 4) /* "ds_cpl" CPL Qual. Debug Store */
-#define X86_FEATURE_VMX		(4*32+ 5) /* Hardware virtualization */
-#define X86_FEATURE_SMX		(4*32+ 6) /* Safer mode */
-#define X86_FEATURE_EST		(4*32+ 7) /* Enhanced SpeedStep */
-#define X86_FEATURE_TM2		(4*32+ 8) /* Thermal Monitor 2 */
-#define X86_FEATURE_SSSE3	(4*32+ 9) /* Supplemental SSE-3 */
-#define X86_FEATURE_CID		(4*32+10) /* Context ID */
-#define X86_FEATURE_FMA		(4*32+12) /* Fused multiply-add */
-#define X86_FEATURE_CX16	(4*32+13) /* CMPXCHG16B */
-#define X86_FEATURE_XTPR	(4*32+14) /* Send Task Priority Messages */
-#define X86_FEATURE_PDCM	(4*32+15) /* Performance Capabilities */
-#define X86_FEATURE_DCA		(4*32+18) /* Direct Cache Access */
-#define X86_FEATURE_XMM4_1	(4*32+19) /* "sse4_1" SSE-4.1 */
-#define X86_FEATURE_XMM4_2	(4*32+20) /* "sse4_2" SSE-4.2 */
-#define X86_FEATURE_X2APIC	(4*32+21) /* x2APIC */
-#define X86_FEATURE_AES		(4*32+25) /* AES instructions */
-#define X86_FEATURE_XSAVE	(4*32+26) /* XSAVE/XRSTOR/XSETBV/XGETBV */
-#define X86_FEATURE_OSXSAVE	(4*32+27) /* "" XSAVE enabled in the OS */
-#define X86_FEATURE_AVX		(4*32+28) /* Advanced Vector Extensions */
-
-/* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
-#define X86_FEATURE_XSTORE	(5*32+ 2) /* "rng" RNG present (xstore) */
-#define X86_FEATURE_XSTORE_EN	(5*32+ 3) /* "rng_en" RNG enabled */
-#define X86_FEATURE_XCRYPT	(5*32+ 6) /* "ace" on-CPU crypto (xcrypt) */
-#define X86_FEATURE_XCRYPT_EN	(5*32+ 7) /* "ace_en" on-CPU crypto enabled */
-#define X86_FEATURE_ACE2	(5*32+ 8) /* Advanced Cryptography Engine v2 */
-#define X86_FEATURE_ACE2_EN	(5*32+ 9) /* ACE v2 enabled */
-#define X86_FEATURE_PHE		(5*32+10) /* PadLock Hash Engine */
-#define X86_FEATURE_PHE_EN	(5*32+11) /* PHE enabled */
-#define X86_FEATURE_PMM		(5*32+12) /* PadLock Montgomery Multiplier */
-#define X86_FEATURE_PMM_EN	(5*32+13) /* PMM enabled */
-
-/* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */
-#define X86_FEATURE_LAHF_LM	(6*32+ 0) /* LAHF/SAHF in long mode */
-#define X86_FEATURE_CMP_LEGACY	(6*32+ 1) /* If yes HyperThreading not valid */
-#define X86_FEATURE_SVM		(6*32+ 2) /* Secure virtual machine */
-#define X86_FEATURE_EXTAPIC	(6*32+ 3) /* Extended APIC space */
-#define X86_FEATURE_CR8_LEGACY	(6*32+ 4) /* CR8 in 32-bit mode */
-#define X86_FEATURE_ABM		(6*32+ 5) /* Advanced bit manipulation */
-#define X86_FEATURE_SSE4A	(6*32+ 6) /* SSE-4A */
-#define X86_FEATURE_MISALIGNSSE (6*32+ 7) /* Misaligned SSE mode */
-#define X86_FEATURE_3DNOWPREFETCH (6*32+ 8) /* 3DNow prefetch instructions */
-#define X86_FEATURE_OSVW	(6*32+ 9) /* OS Visible Workaround */
-#define X86_FEATURE_IBS		(6*32+10) /* Instruction Based Sampling */
-#define X86_FEATURE_SSE5	(6*32+11) /* SSE-5 */
-#define X86_FEATURE_SKINIT	(6*32+12) /* SKINIT/STGI instructions */
-#define X86_FEATURE_WDT		(6*32+13) /* Watchdog timer */
-
-/*
- * Auxiliary flags: Linux defined - For features scattered in various
- * CPUID levels like 0x6, 0xA etc
- */
-#define X86_FEATURE_IDA		(7*32+ 0) /* Intel Dynamic Acceleration */
-
-/* Virtualization flags: Linux defined */
-#define X86_FEATURE_TPR_SHADOW  (8*32+ 0) /* Intel TPR Shadow */
-#define X86_FEATURE_VNMI        (8*32+ 1) /* Intel Virtual NMI */
-#define X86_FEATURE_FLEXPRIORITY (8*32+ 2) /* Intel FlexPriority */
-#define X86_FEATURE_EPT         (8*32+ 3) /* Intel Extended Page Table */
-#define X86_FEATURE_VPID        (8*32+ 4) /* Intel Virtual Processor ID */
-
-#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
-
-#include <linux/bitops.h>
-
-extern const char * const x86_cap_flags[NCAPINTS*32];
-extern const char * const x86_power_flags[32];
-
-#define test_cpu_cap(c, bit)						\
-	 test_bit(bit, (unsigned long *)((c)->x86_capability))
-
-#define cpu_has(c, bit)							\
-	(__builtin_constant_p(bit) &&					\
-	 ( (((bit)>>5)==0 && (1UL<<((bit)&31) & REQUIRED_MASK0)) ||	\
-	   (((bit)>>5)==1 && (1UL<<((bit)&31) & REQUIRED_MASK1)) ||	\
-	   (((bit)>>5)==2 && (1UL<<((bit)&31) & REQUIRED_MASK2)) ||	\
-	   (((bit)>>5)==3 && (1UL<<((bit)&31) & REQUIRED_MASK3)) ||	\
-	   (((bit)>>5)==4 && (1UL<<((bit)&31) & REQUIRED_MASK4)) ||	\
-	   (((bit)>>5)==5 && (1UL<<((bit)&31) & REQUIRED_MASK5)) ||	\
-	   (((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) ||	\
-	   (((bit)>>5)==7 && (1UL<<((bit)&31) & REQUIRED_MASK7)) )	\
-	  ? 1 :								\
-	 test_cpu_cap(c, bit))
-
-#define boot_cpu_has(bit)	cpu_has(&boot_cpu_data, bit)
-
-#define set_cpu_cap(c, bit)	set_bit(bit, (unsigned long *)((c)->x86_capability))
-#define clear_cpu_cap(c, bit)	clear_bit(bit, (unsigned long *)((c)->x86_capability))
-#define setup_clear_cpu_cap(bit) do { \
-	clear_cpu_cap(&boot_cpu_data, bit);	\
-	set_bit(bit, (unsigned long *)cleared_cpu_caps); \
-} while (0)
-#define setup_force_cpu_cap(bit) do { \
-	set_cpu_cap(&boot_cpu_data, bit);	\
-	clear_bit(bit, (unsigned long *)cleared_cpu_caps);	\
-} while (0)
-
-#define cpu_has_fpu		boot_cpu_has(X86_FEATURE_FPU)
-#define cpu_has_vme		boot_cpu_has(X86_FEATURE_VME)
-#define cpu_has_de		boot_cpu_has(X86_FEATURE_DE)
-#define cpu_has_pse		boot_cpu_has(X86_FEATURE_PSE)
-#define cpu_has_tsc		boot_cpu_has(X86_FEATURE_TSC)
-#define cpu_has_pae		boot_cpu_has(X86_FEATURE_PAE)
-#define cpu_has_pge		boot_cpu_has(X86_FEATURE_PGE)
-#define cpu_has_apic		boot_cpu_has(X86_FEATURE_APIC)
-#define cpu_has_sep		boot_cpu_has(X86_FEATURE_SEP)
-#define cpu_has_mtrr		boot_cpu_has(X86_FEATURE_MTRR)
-#define cpu_has_mmx		boot_cpu_has(X86_FEATURE_MMX)
-#define cpu_has_fxsr		boot_cpu_has(X86_FEATURE_FXSR)
-#define cpu_has_xmm		boot_cpu_has(X86_FEATURE_XMM)
-#define cpu_has_xmm2		boot_cpu_has(X86_FEATURE_XMM2)
-#define cpu_has_xmm3		boot_cpu_has(X86_FEATURE_XMM3)
-#define cpu_has_ht		boot_cpu_has(X86_FEATURE_HT)
-#define cpu_has_mp		boot_cpu_has(X86_FEATURE_MP)
-#define cpu_has_nx		boot_cpu_has(X86_FEATURE_NX)
-#define cpu_has_k6_mtrr		boot_cpu_has(X86_FEATURE_K6_MTRR)
-#define cpu_has_cyrix_arr	boot_cpu_has(X86_FEATURE_CYRIX_ARR)
-#define cpu_has_centaur_mcr	boot_cpu_has(X86_FEATURE_CENTAUR_MCR)
-#define cpu_has_xstore		boot_cpu_has(X86_FEATURE_XSTORE)
-#define cpu_has_xstore_enabled	boot_cpu_has(X86_FEATURE_XSTORE_EN)
-#define cpu_has_xcrypt		boot_cpu_has(X86_FEATURE_XCRYPT)
-#define cpu_has_xcrypt_enabled	boot_cpu_has(X86_FEATURE_XCRYPT_EN)
-#define cpu_has_ace2		boot_cpu_has(X86_FEATURE_ACE2)
-#define cpu_has_ace2_enabled	boot_cpu_has(X86_FEATURE_ACE2_EN)
-#define cpu_has_phe		boot_cpu_has(X86_FEATURE_PHE)
-#define cpu_has_phe_enabled	boot_cpu_has(X86_FEATURE_PHE_EN)
-#define cpu_has_pmm		boot_cpu_has(X86_FEATURE_PMM)
-#define cpu_has_pmm_enabled	boot_cpu_has(X86_FEATURE_PMM_EN)
-#define cpu_has_ds		boot_cpu_has(X86_FEATURE_DS)
-#define cpu_has_pebs		boot_cpu_has(X86_FEATURE_PEBS)
-#define cpu_has_clflush		boot_cpu_has(X86_FEATURE_CLFLSH)
-#define cpu_has_bts		boot_cpu_has(X86_FEATURE_BTS)
-#define cpu_has_gbpages		boot_cpu_has(X86_FEATURE_GBPAGES)
-#define cpu_has_arch_perfmon	boot_cpu_has(X86_FEATURE_ARCH_PERFMON)
-#define cpu_has_pat		boot_cpu_has(X86_FEATURE_PAT)
-#define cpu_has_xmm4_1		boot_cpu_has(X86_FEATURE_XMM4_1)
-#define cpu_has_xmm4_2		boot_cpu_has(X86_FEATURE_XMM4_2)
-#define cpu_has_x2apic		boot_cpu_has(X86_FEATURE_X2APIC)
-#define cpu_has_xsave		boot_cpu_has(X86_FEATURE_XSAVE)
-
-#if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64)
-# define cpu_has_invlpg		1
-#else
-# define cpu_has_invlpg		(boot_cpu_data.x86 > 3)
-#endif
-
-#ifdef CONFIG_X86_64
-
-#undef  cpu_has_vme
-#define cpu_has_vme		0
-
-#undef  cpu_has_pae
-#define cpu_has_pae		___BUG___
-
-#undef  cpu_has_mp
-#define cpu_has_mp		1
-
-#undef  cpu_has_k6_mtrr
-#define cpu_has_k6_mtrr		0
-
-#undef  cpu_has_cyrix_arr
-#define cpu_has_cyrix_arr	0
-
-#undef  cpu_has_centaur_mcr
-#define cpu_has_centaur_mcr	0
-
-#endif /* CONFIG_X86_64 */
-
-#endif /* defined(__KERNEL__) && !defined(__ASSEMBLY__) */
-
-#endif /* ASM_X86__CPUFEATURE_H */
diff --git a/include/asm-x86/current.h b/include/asm-x86/current.h
deleted file mode 100644
index a863ead..0000000
--- a/include/asm-x86/current.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef ASM_X86__CURRENT_H
-#define ASM_X86__CURRENT_H
-
-#ifdef CONFIG_X86_32
-#include <linux/compiler.h>
-#include <asm/percpu.h>
-
-struct task_struct;
-
-DECLARE_PER_CPU(struct task_struct *, current_task);
-static __always_inline struct task_struct *get_current(void)
-{
-	return x86_read_percpu(current_task);
-}
-
-#else /* X86_32 */
-
-#ifndef __ASSEMBLY__
-#include <asm/pda.h>
-
-struct task_struct;
-
-static __always_inline struct task_struct *get_current(void)
-{
-	return read_pda(pcurrent);
-}
-
-#else /* __ASSEMBLY__ */
-
-#include <asm/asm-offsets.h>
-#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* X86_32 */
-
-#define current get_current()
-
-#endif /* ASM_X86__CURRENT_H */
diff --git a/include/asm-x86/debugreg.h b/include/asm-x86/debugreg.h
deleted file mode 100644
index ecb6907..0000000
--- a/include/asm-x86/debugreg.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef ASM_X86__DEBUGREG_H
-#define ASM_X86__DEBUGREG_H
-
-
-/* Indicate the register numbers for a number of the specific
-   debug registers.  Registers 0-3 contain the addresses we wish to trap on */
-#define DR_FIRSTADDR 0        /* u_debugreg[DR_FIRSTADDR] */
-#define DR_LASTADDR 3         /* u_debugreg[DR_LASTADDR]  */
-
-#define DR_STATUS 6           /* u_debugreg[DR_STATUS]     */
-#define DR_CONTROL 7          /* u_debugreg[DR_CONTROL] */
-
-/* Define a few things for the status register.  We can use this to determine
-   which debugging register was responsible for the trap.  The other bits
-   are either reserved or not of interest to us. */
-
-#define DR_TRAP0	(0x1)		/* db0 */
-#define DR_TRAP1	(0x2)		/* db1 */
-#define DR_TRAP2	(0x4)		/* db2 */
-#define DR_TRAP3	(0x8)		/* db3 */
-
-#define DR_STEP		(0x4000)	/* single-step */
-#define DR_SWITCH	(0x8000)	/* task switch */
-
-/* Now define a bunch of things for manipulating the control register.
-   The top two bytes of the control register consist of 4 fields of 4
-   bits - each field corresponds to one of the four debug registers,
-   and indicates what types of access we trap on, and how large the data
-   field is that we are looking at */
-
-#define DR_CONTROL_SHIFT 16 /* Skip this many bits in ctl register */
-#define DR_CONTROL_SIZE 4   /* 4 control bits per register */
-
-#define DR_RW_EXECUTE (0x0)   /* Settings for the access types to trap on */
-#define DR_RW_WRITE (0x1)
-#define DR_RW_READ (0x3)
-
-#define DR_LEN_1 (0x0) /* Settings for data length to trap on */
-#define DR_LEN_2 (0x4)
-#define DR_LEN_4 (0xC)
-#define DR_LEN_8 (0x8)
-
-/* The low byte to the control register determine which registers are
-   enabled.  There are 4 fields of two bits.  One bit is "local", meaning
-   that the processor will reset the bit after a task switch and the other
-   is global meaning that we have to explicitly reset the bit.  With linux,
-   you can use either one, since we explicitly zero the register when we enter
-   kernel mode. */
-
-#define DR_LOCAL_ENABLE_SHIFT 0    /* Extra shift to the local enable bit */
-#define DR_GLOBAL_ENABLE_SHIFT 1   /* Extra shift to the global enable bit */
-#define DR_ENABLE_SIZE 2           /* 2 enable bits per register */
-
-#define DR_LOCAL_ENABLE_MASK (0x55)  /* Set  local bits for all 4 regs */
-#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */
-
-/* The second byte to the control register has a few special things.
-   We can slow the instruction pipeline for instructions coming via the
-   gdt or the ldt if we want to.  I am not sure why this is an advantage */
-
-#ifdef __i386__
-#define DR_CONTROL_RESERVED (0xFC00) /* Reserved by Intel */
-#else
-#define DR_CONTROL_RESERVED (0xFFFFFFFF0000FC00UL) /* Reserved */
-#endif
-
-#define DR_LOCAL_SLOWDOWN (0x100)   /* Local slow the pipeline */
-#define DR_GLOBAL_SLOWDOWN (0x200)  /* Global slow the pipeline */
-
-#endif /* ASM_X86__DEBUGREG_H */
diff --git a/include/asm-x86/delay.h b/include/asm-x86/delay.h
deleted file mode 100644
index 8a0da95b..0000000
--- a/include/asm-x86/delay.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef ASM_X86__DELAY_H
-#define ASM_X86__DELAY_H
-
-/*
- * Copyright (C) 1993 Linus Torvalds
- *
- * Delay routines calling functions in arch/x86/lib/delay.c
- */
-
-/* Undefined functions to get compile-time errors */
-extern void __bad_udelay(void);
-extern void __bad_ndelay(void);
-
-extern void __udelay(unsigned long usecs);
-extern void __ndelay(unsigned long nsecs);
-extern void __const_udelay(unsigned long xloops);
-extern void __delay(unsigned long loops);
-
-/* 0x10c7 is 2**32 / 1000000 (rounded up) */
-#define udelay(n) (__builtin_constant_p(n) ? \
-	((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c7ul)) : \
-	__udelay(n))
-
-/* 0x5 is 2**32 / 1000000000 (rounded up) */
-#define ndelay(n) (__builtin_constant_p(n) ? \
-	((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
-	__ndelay(n))
-
-void use_tsc_delay(void);
-
-#endif /* ASM_X86__DELAY_H */
diff --git a/include/asm-x86/desc.h b/include/asm-x86/desc.h
deleted file mode 100644
index f06adac..0000000
--- a/include/asm-x86/desc.h
+++ /dev/null
@@ -1,409 +0,0 @@
-#ifndef ASM_X86__DESC_H
-#define ASM_X86__DESC_H
-
-#ifndef __ASSEMBLY__
-#include <asm/desc_defs.h>
-#include <asm/ldt.h>
-#include <asm/mmu.h>
-#include <linux/smp.h>
-
-static inline void fill_ldt(struct desc_struct *desc,
-			    const struct user_desc *info)
-{
-	desc->limit0 = info->limit & 0x0ffff;
-	desc->base0 = info->base_addr & 0x0000ffff;
-
-	desc->base1 = (info->base_addr & 0x00ff0000) >> 16;
-	desc->type = (info->read_exec_only ^ 1) << 1;
-	desc->type |= info->contents << 2;
-	desc->s = 1;
-	desc->dpl = 0x3;
-	desc->p = info->seg_not_present ^ 1;
-	desc->limit = (info->limit & 0xf0000) >> 16;
-	desc->avl = info->useable;
-	desc->d = info->seg_32bit;
-	desc->g = info->limit_in_pages;
-	desc->base2 = (info->base_addr & 0xff000000) >> 24;
-	/*
-	 * Don't allow setting of the lm bit. It is useless anyway
-	 * because 64bit system calls require __USER_CS:
-	 */
-	desc->l = 0;
-}
-
-extern struct desc_ptr idt_descr;
-extern gate_desc idt_table[];
-
-struct gdt_page {
-	struct desc_struct gdt[GDT_ENTRIES];
-} __attribute__((aligned(PAGE_SIZE)));
-DECLARE_PER_CPU(struct gdt_page, gdt_page);
-
-static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu)
-{
-	return per_cpu(gdt_page, cpu).gdt;
-}
-
-#ifdef CONFIG_X86_64
-
-static inline void pack_gate(gate_desc *gate, unsigned type, unsigned long func,
-			     unsigned dpl, unsigned ist, unsigned seg)
-{
-	gate->offset_low = PTR_LOW(func);
-	gate->segment = __KERNEL_CS;
-	gate->ist = ist;
-	gate->p = 1;
-	gate->dpl = dpl;
-	gate->zero0 = 0;
-	gate->zero1 = 0;
-	gate->type = type;
-	gate->offset_middle = PTR_MIDDLE(func);
-	gate->offset_high = PTR_HIGH(func);
-}
-
-#else
-static inline void pack_gate(gate_desc *gate, unsigned char type,
-			     unsigned long base, unsigned dpl, unsigned flags,
-			     unsigned short seg)
-{
-	gate->a = (seg << 16) | (base & 0xffff);
-	gate->b = (base & 0xffff0000) |
-		  (((0x80 | type | (dpl << 5)) & 0xff) << 8);
-}
-
-#endif
-
-static inline int desc_empty(const void *ptr)
-{
-	const u32 *desc = ptr;
-	return !(desc[0] | desc[1]);
-}
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define load_TR_desc() native_load_tr_desc()
-#define load_gdt(dtr) native_load_gdt(dtr)
-#define load_idt(dtr) native_load_idt(dtr)
-#define load_tr(tr) asm volatile("ltr %0"::"m" (tr))
-#define load_ldt(ldt) asm volatile("lldt %0"::"m" (ldt))
-
-#define store_gdt(dtr) native_store_gdt(dtr)
-#define store_idt(dtr) native_store_idt(dtr)
-#define store_tr(tr) (tr = native_store_tr())
-#define store_ldt(ldt) asm("sldt %0":"=m" (ldt))
-
-#define load_TLS(t, cpu) native_load_tls(t, cpu)
-#define set_ldt native_set_ldt
-
-#define write_ldt_entry(dt, entry, desc)	\
-	native_write_ldt_entry(dt, entry, desc)
-#define write_gdt_entry(dt, entry, desc, type)		\
-	native_write_gdt_entry(dt, entry, desc, type)
-#define write_idt_entry(dt, entry, g)		\
-	native_write_idt_entry(dt, entry, g)
-
-static inline void paravirt_alloc_ldt(struct desc_struct *ldt, unsigned entries)
-{
-}
-
-static inline void paravirt_free_ldt(struct desc_struct *ldt, unsigned entries)
-{
-}
-#endif	/* CONFIG_PARAVIRT */
-
-static inline void native_write_idt_entry(gate_desc *idt, int entry,
-					  const gate_desc *gate)
-{
-	memcpy(&idt[entry], gate, sizeof(*gate));
-}
-
-static inline void native_write_ldt_entry(struct desc_struct *ldt, int entry,
-					  const void *desc)
-{
-	memcpy(&ldt[entry], desc, 8);
-}
-
-static inline void native_write_gdt_entry(struct desc_struct *gdt, int entry,
-					  const void *desc, int type)
-{
-	unsigned int size;
-	switch (type) {
-	case DESC_TSS:
-		size = sizeof(tss_desc);
-		break;
-	case DESC_LDT:
-		size = sizeof(ldt_desc);
-		break;
-	default:
-		size = sizeof(struct desc_struct);
-		break;
-	}
-	memcpy(&gdt[entry], desc, size);
-}
-
-static inline void pack_descriptor(struct desc_struct *desc, unsigned long base,
-				   unsigned long limit, unsigned char type,
-				   unsigned char flags)
-{
-	desc->a = ((base & 0xffff) << 16) | (limit & 0xffff);
-	desc->b = (base & 0xff000000) | ((base & 0xff0000) >> 16) |
-		(limit & 0x000f0000) | ((type & 0xff) << 8) |
-		((flags & 0xf) << 20);
-	desc->p = 1;
-}
-
-
-static inline void set_tssldt_descriptor(void *d, unsigned long addr,
-					 unsigned type, unsigned size)
-{
-#ifdef CONFIG_X86_64
-	struct ldttss_desc64 *desc = d;
-	memset(desc, 0, sizeof(*desc));
-	desc->limit0 = size & 0xFFFF;
-	desc->base0 = PTR_LOW(addr);
-	desc->base1 = PTR_MIDDLE(addr) & 0xFF;
-	desc->type = type;
-	desc->p = 1;
-	desc->limit1 = (size >> 16) & 0xF;
-	desc->base2 = (PTR_MIDDLE(addr) >> 8) & 0xFF;
-	desc->base3 = PTR_HIGH(addr);
-#else
-	pack_descriptor((struct desc_struct *)d, addr, size, 0x80 | type, 0);
-#endif
-}
-
-static inline void __set_tss_desc(unsigned cpu, unsigned int entry, void *addr)
-{
-	struct desc_struct *d = get_cpu_gdt_table(cpu);
-	tss_desc tss;
-
-	/*
-	 * sizeof(unsigned long) coming from an extra "long" at the end
-	 * of the iobitmap. See tss_struct definition in processor.h
-	 *
-	 * -1? seg base+limit should be pointing to the address of the
-	 * last valid byte
-	 */
-	set_tssldt_descriptor(&tss, (unsigned long)addr, DESC_TSS,
-			      IO_BITMAP_OFFSET + IO_BITMAP_BYTES +
-			      sizeof(unsigned long) - 1);
-	write_gdt_entry(d, entry, &tss, DESC_TSS);
-}
-
-#define set_tss_desc(cpu, addr) __set_tss_desc(cpu, GDT_ENTRY_TSS, addr)
-
-static inline void native_set_ldt(const void *addr, unsigned int entries)
-{
-	if (likely(entries == 0))
-		asm volatile("lldt %w0"::"q" (0));
-	else {
-		unsigned cpu = smp_processor_id();
-		ldt_desc ldt;
-
-		set_tssldt_descriptor(&ldt, (unsigned long)addr, DESC_LDT,
-				      entries * LDT_ENTRY_SIZE - 1);
-		write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT,
-				&ldt, DESC_LDT);
-		asm volatile("lldt %w0"::"q" (GDT_ENTRY_LDT*8));
-	}
-}
-
-static inline void native_load_tr_desc(void)
-{
-	asm volatile("ltr %w0"::"q" (GDT_ENTRY_TSS*8));
-}
-
-static inline void native_load_gdt(const struct desc_ptr *dtr)
-{
-	asm volatile("lgdt %0"::"m" (*dtr));
-}
-
-static inline void native_load_idt(const struct desc_ptr *dtr)
-{
-	asm volatile("lidt %0"::"m" (*dtr));
-}
-
-static inline void native_store_gdt(struct desc_ptr *dtr)
-{
-	asm volatile("sgdt %0":"=m" (*dtr));
-}
-
-static inline void native_store_idt(struct desc_ptr *dtr)
-{
-	asm volatile("sidt %0":"=m" (*dtr));
-}
-
-static inline unsigned long native_store_tr(void)
-{
-	unsigned long tr;
-	asm volatile("str %0":"=r" (tr));
-	return tr;
-}
-
-static inline void native_load_tls(struct thread_struct *t, unsigned int cpu)
-{
-	unsigned int i;
-	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
-
-	for (i = 0; i < GDT_ENTRY_TLS_ENTRIES; i++)
-		gdt[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i];
-}
-
-#define _LDT_empty(info)				\
-	((info)->base_addr		== 0	&&	\
-	 (info)->limit			== 0	&&	\
-	 (info)->contents		== 0	&&	\
-	 (info)->read_exec_only		== 1	&&	\
-	 (info)->seg_32bit		== 0	&&	\
-	 (info)->limit_in_pages		== 0	&&	\
-	 (info)->seg_not_present	== 1	&&	\
-	 (info)->useable		== 0)
-
-#ifdef CONFIG_X86_64
-#define LDT_empty(info) (_LDT_empty(info) && ((info)->lm == 0))
-#else
-#define LDT_empty(info) (_LDT_empty(info))
-#endif
-
-static inline void clear_LDT(void)
-{
-	set_ldt(NULL, 0);
-}
-
-/*
- * load one particular LDT into the current CPU
- */
-static inline void load_LDT_nolock(mm_context_t *pc)
-{
-	set_ldt(pc->ldt, pc->size);
-}
-
-static inline void load_LDT(mm_context_t *pc)
-{
-	preempt_disable();
-	load_LDT_nolock(pc);
-	preempt_enable();
-}
-
-static inline unsigned long get_desc_base(const struct desc_struct *desc)
-{
-	return desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24);
-}
-
-static inline unsigned long get_desc_limit(const struct desc_struct *desc)
-{
-	return desc->limit0 | (desc->limit << 16);
-}
-
-static inline void _set_gate(int gate, unsigned type, void *addr,
-			     unsigned dpl, unsigned ist, unsigned seg)
-{
-	gate_desc s;
-	pack_gate(&s, type, (unsigned long)addr, dpl, ist, seg);
-	/*
-	 * does not need to be atomic because it is only done once at
-	 * setup time
-	 */
-	write_idt_entry(idt_table, gate, &s);
-}
-
-/*
- * This needs to use 'idt_table' rather than 'idt', and
- * thus use the _nonmapped_ version of the IDT, as the
- * Pentium F0 0F bugfix can have resulted in the mapped
- * IDT being write-protected.
- */
-static inline void set_intr_gate(unsigned int n, void *addr)
-{
-	BUG_ON((unsigned)n > 0xFF);
-	_set_gate(n, GATE_INTERRUPT, addr, 0, 0, __KERNEL_CS);
-}
-
-#define SYS_VECTOR_FREE		0
-#define SYS_VECTOR_ALLOCED	1
-
-extern int first_system_vector;
-extern char system_vectors[];
-
-static inline void alloc_system_vector(int vector)
-{
-	if (system_vectors[vector] == SYS_VECTOR_FREE) {
-		system_vectors[vector] = SYS_VECTOR_ALLOCED;
-		if (first_system_vector > vector)
-			first_system_vector = vector;
-	} else
-		BUG();
-}
-
-static inline void alloc_intr_gate(unsigned int n, void *addr)
-{
-	alloc_system_vector(n);
-	set_intr_gate(n, addr);
-}
-
-/*
- * This routine sets up an interrupt gate at directory privilege level 3.
- */
-static inline void set_system_intr_gate(unsigned int n, void *addr)
-{
-	BUG_ON((unsigned)n > 0xFF);
-	_set_gate(n, GATE_INTERRUPT, addr, 0x3, 0, __KERNEL_CS);
-}
-
-static inline void set_system_trap_gate(unsigned int n, void *addr)
-{
-	BUG_ON((unsigned)n > 0xFF);
-	_set_gate(n, GATE_TRAP, addr, 0x3, 0, __KERNEL_CS);
-}
-
-static inline void set_trap_gate(unsigned int n, void *addr)
-{
-	BUG_ON((unsigned)n > 0xFF);
-	_set_gate(n, GATE_TRAP, addr, 0, 0, __KERNEL_CS);
-}
-
-static inline void set_task_gate(unsigned int n, unsigned int gdt_entry)
-{
-	BUG_ON((unsigned)n > 0xFF);
-	_set_gate(n, GATE_TASK, (void *)0, 0, 0, (gdt_entry<<3));
-}
-
-static inline void set_intr_gate_ist(int n, void *addr, unsigned ist)
-{
-	BUG_ON((unsigned)n > 0xFF);
-	_set_gate(n, GATE_INTERRUPT, addr, 0, ist, __KERNEL_CS);
-}
-
-static inline void set_system_intr_gate_ist(int n, void *addr, unsigned ist)
-{
-	BUG_ON((unsigned)n > 0xFF);
-	_set_gate(n, GATE_INTERRUPT, addr, 0x3, ist, __KERNEL_CS);
-}
-
-#else
-/*
- * GET_DESC_BASE reads the descriptor base of the specified segment.
- *
- * Args:
- *    idx - descriptor index
- *    gdt - GDT pointer
- *    base - 32bit register to which the base will be written
- *    lo_w - lo word of the "base" register
- *    lo_b - lo byte of the "base" register
- *    hi_b - hi byte of the low word of the "base" register
- *
- * Example:
- *    GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah)
- *    Will read the base address of GDT_ENTRY_ESPFIX_SS and put it into %eax.
- */
-#define GET_DESC_BASE(idx, gdt, base, lo_w, lo_b, hi_b) \
-	movb idx * 8 + 4(gdt), lo_b;			\
-	movb idx * 8 + 7(gdt), hi_b;			\
-	shll $16, base;					\
-	movw idx * 8 + 2(gdt), lo_w;
-
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* ASM_X86__DESC_H */
diff --git a/include/asm-x86/desc_defs.h b/include/asm-x86/desc_defs.h
deleted file mode 100644
index b881db6..0000000
--- a/include/asm-x86/desc_defs.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* Written 2000 by Andi Kleen */
-#ifndef ASM_X86__DESC_DEFS_H
-#define ASM_X86__DESC_DEFS_H
-
-/*
- * Segment descriptor structure definitions, usable from both x86_64 and i386
- * archs.
- */
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-/*
- * FIXME: Acessing the desc_struct through its fields is more elegant,
- * and should be the one valid thing to do. However, a lot of open code
- * still touches the a and b acessors, and doing this allow us to do it
- * incrementally. We keep the signature as a struct, rather than an union,
- * so we can get rid of it transparently in the future -- glommer
- */
-/* 8 byte segment descriptor */
-struct desc_struct {
-	union {
-		struct {
-			unsigned int a;
-			unsigned int b;
-		};
-		struct {
-			u16 limit0;
-			u16 base0;
-			unsigned base1: 8, type: 4, s: 1, dpl: 2, p: 1;
-			unsigned limit: 4, avl: 1, l: 1, d: 1, g: 1, base2: 8;
-		};
-	};
-} __attribute__((packed));
-
-enum {
-	GATE_INTERRUPT = 0xE,
-	GATE_TRAP = 0xF,
-	GATE_CALL = 0xC,
-	GATE_TASK = 0x5,
-};
-
-/* 16byte gate */
-struct gate_struct64 {
-	u16 offset_low;
-	u16 segment;
-	unsigned ist : 3, zero0 : 5, type : 5, dpl : 2, p : 1;
-	u16 offset_middle;
-	u32 offset_high;
-	u32 zero1;
-} __attribute__((packed));
-
-#define PTR_LOW(x) ((unsigned long long)(x) & 0xFFFF)
-#define PTR_MIDDLE(x) (((unsigned long long)(x) >> 16) & 0xFFFF)
-#define PTR_HIGH(x) ((unsigned long long)(x) >> 32)
-
-enum {
-	DESC_TSS = 0x9,
-	DESC_LDT = 0x2,
-	DESCTYPE_S = 0x10,	/* !system */
-};
-
-/* LDT or TSS descriptor in the GDT. 16 bytes. */
-struct ldttss_desc64 {
-	u16 limit0;
-	u16 base0;
-	unsigned base1 : 8, type : 5, dpl : 2, p : 1;
-	unsigned limit1 : 4, zero0 : 3, g : 1, base2 : 8;
-	u32 base3;
-	u32 zero1;
-} __attribute__((packed));
-
-#ifdef CONFIG_X86_64
-typedef struct gate_struct64 gate_desc;
-typedef struct ldttss_desc64 ldt_desc;
-typedef struct ldttss_desc64 tss_desc;
-#define gate_offset(g) ((g).offset_low | ((unsigned long)(g).offset_middle << 16) | ((unsigned long)(g).offset_high << 32))
-#define gate_segment(g) ((g).segment)
-#else
-typedef struct desc_struct gate_desc;
-typedef struct desc_struct ldt_desc;
-typedef struct desc_struct tss_desc;
-#define gate_offset(g)		(((g).b & 0xffff0000) | ((g).a & 0x0000ffff))
-#define gate_segment(g)		((g).a >> 16)
-#endif
-
-struct desc_ptr {
-	unsigned short size;
-	unsigned long address;
-} __attribute__((packed)) ;
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* ASM_X86__DESC_DEFS_H */
diff --git a/include/asm-x86/device.h b/include/asm-x86/device.h
deleted file mode 100644
index 1bece04..0000000
--- a/include/asm-x86/device.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef ASM_X86__DEVICE_H
-#define ASM_X86__DEVICE_H
-
-struct dev_archdata {
-#ifdef CONFIG_ACPI
-	void	*acpi_handle;
-#endif
-#ifdef CONFIG_X86_64
-struct dma_mapping_ops *dma_ops;
-#endif
-#ifdef CONFIG_DMAR
-	void *iommu; /* hook for IOMMU specific extension */
-#endif
-};
-
-#endif /* ASM_X86__DEVICE_H */
diff --git a/include/asm-x86/div64.h b/include/asm-x86/div64.h
deleted file mode 100644
index f9530f2..0000000
--- a/include/asm-x86/div64.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef ASM_X86__DIV64_H
-#define ASM_X86__DIV64_H
-
-#ifdef CONFIG_X86_32
-
-#include <linux/types.h>
-
-/*
- * do_div() is NOT a C function. It wants to return
- * two values (the quotient and the remainder), but
- * since that doesn't work very well in C, what it
- * does is:
- *
- * - modifies the 64-bit dividend _in_place_
- * - returns the 32-bit remainder
- *
- * This ends up being the most efficient "calling
- * convention" on x86.
- */
-#define do_div(n, base)						\
-({								\
-	unsigned long __upper, __low, __high, __mod, __base;	\
-	__base = (base);					\
-	asm("":"=a" (__low), "=d" (__high) : "A" (n));		\
-	__upper = __high;					\
-	if (__high) {						\
-		__upper = __high % (__base);			\
-		__high = __high / (__base);			\
-	}							\
-	asm("divl %2":"=a" (__low), "=d" (__mod)		\
-	    : "rm" (__base), "0" (__low), "1" (__upper));	\
-	asm("":"=A" (n) : "a" (__low), "d" (__high));		\
-	__mod;							\
-})
-
-static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
-{
-	union {
-		u64 v64;
-		u32 v32[2];
-	} d = { dividend };
-	u32 upper;
-
-	upper = d.v32[1];
-	d.v32[1] = 0;
-	if (upper >= divisor) {
-		d.v32[1] = upper / divisor;
-		upper %= divisor;
-	}
-	asm ("divl %2" : "=a" (d.v32[0]), "=d" (*remainder) :
-		"rm" (divisor), "0" (d.v32[0]), "1" (upper));
-	return d.v64;
-}
-#define div_u64_rem	div_u64_rem
-
-#else
-# include <asm-generic/div64.h>
-#endif /* CONFIG_X86_32 */
-
-#endif /* ASM_X86__DIV64_H */
diff --git a/include/asm-x86/dma-mapping.h b/include/asm-x86/dma-mapping.h
deleted file mode 100644
index 219c33d..0000000
--- a/include/asm-x86/dma-mapping.h
+++ /dev/null
@@ -1,308 +0,0 @@
-#ifndef ASM_X86__DMA_MAPPING_H
-#define ASM_X86__DMA_MAPPING_H
-
-/*
- * IOMMU interface. See Documentation/DMA-mapping.txt and DMA-API.txt for
- * documentation.
- */
-
-#include <linux/scatterlist.h>
-#include <asm/io.h>
-#include <asm/swiotlb.h>
-#include <asm-generic/dma-coherent.h>
-
-extern dma_addr_t bad_dma_address;
-extern int iommu_merge;
-extern struct device x86_dma_fallback_dev;
-extern int panic_on_overflow;
-
-struct dma_mapping_ops {
-	int             (*mapping_error)(struct device *dev,
-					 dma_addr_t dma_addr);
-	void*           (*alloc_coherent)(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, gfp_t gfp);
-	void            (*free_coherent)(struct device *dev, size_t size,
-				void *vaddr, dma_addr_t dma_handle);
-	dma_addr_t      (*map_single)(struct device *hwdev, phys_addr_t ptr,
-				size_t size, int direction);
-	void            (*unmap_single)(struct device *dev, dma_addr_t addr,
-				size_t size, int direction);
-	void            (*sync_single_for_cpu)(struct device *hwdev,
-				dma_addr_t dma_handle, size_t size,
-				int direction);
-	void            (*sync_single_for_device)(struct device *hwdev,
-				dma_addr_t dma_handle, size_t size,
-				int direction);
-	void            (*sync_single_range_for_cpu)(struct device *hwdev,
-				dma_addr_t dma_handle, unsigned long offset,
-				size_t size, int direction);
-	void            (*sync_single_range_for_device)(struct device *hwdev,
-				dma_addr_t dma_handle, unsigned long offset,
-				size_t size, int direction);
-	void            (*sync_sg_for_cpu)(struct device *hwdev,
-				struct scatterlist *sg, int nelems,
-				int direction);
-	void            (*sync_sg_for_device)(struct device *hwdev,
-				struct scatterlist *sg, int nelems,
-				int direction);
-	int             (*map_sg)(struct device *hwdev, struct scatterlist *sg,
-				int nents, int direction);
-	void            (*unmap_sg)(struct device *hwdev,
-				struct scatterlist *sg, int nents,
-				int direction);
-	int             (*dma_supported)(struct device *hwdev, u64 mask);
-	int		is_phys;
-};
-
-extern struct dma_mapping_ops *dma_ops;
-
-static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
-{
-#ifdef CONFIG_X86_32
-	return dma_ops;
-#else
-	if (unlikely(!dev) || !dev->archdata.dma_ops)
-		return dma_ops;
-	else
-		return dev->archdata.dma_ops;
-#endif /* ASM_X86__DMA_MAPPING_H */
-}
-
-/* Make sure we keep the same behaviour */
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-#ifdef CONFIG_X86_32
-	return 0;
-#else
-	struct dma_mapping_ops *ops = get_dma_ops(dev);
-	if (ops->mapping_error)
-		return ops->mapping_error(dev, dma_addr);
-
-	return (dma_addr == bad_dma_address);
-#endif
-}
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#define dma_is_consistent(d, h)	(1)
-
-extern int dma_supported(struct device *hwdev, u64 mask);
-extern int dma_set_mask(struct device *dev, u64 mask);
-
-extern void *dma_generic_alloc_coherent(struct device *dev, size_t size,
-					dma_addr_t *dma_addr, gfp_t flag);
-
-static inline dma_addr_t
-dma_map_single(struct device *hwdev, void *ptr, size_t size,
-	       int direction)
-{
-	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
-
-	BUG_ON(!valid_dma_direction(direction));
-	return ops->map_single(hwdev, virt_to_phys(ptr), size, direction);
-}
-
-static inline void
-dma_unmap_single(struct device *dev, dma_addr_t addr, size_t size,
-		 int direction)
-{
-	struct dma_mapping_ops *ops = get_dma_ops(dev);
-
-	BUG_ON(!valid_dma_direction(direction));
-	if (ops->unmap_single)
-		ops->unmap_single(dev, addr, size, direction);
-}
-
-static inline int
-dma_map_sg(struct device *hwdev, struct scatterlist *sg,
-	   int nents, int direction)
-{
-	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
-
-	BUG_ON(!valid_dma_direction(direction));
-	return ops->map_sg(hwdev, sg, nents, direction);
-}
-
-static inline void
-dma_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents,
-	     int direction)
-{
-	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
-
-	BUG_ON(!valid_dma_direction(direction));
-	if (ops->unmap_sg)
-		ops->unmap_sg(hwdev, sg, nents, direction);
-}
-
-static inline void
-dma_sync_single_for_cpu(struct device *hwdev, dma_addr_t dma_handle,
-			size_t size, int direction)
-{
-	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
-
-	BUG_ON(!valid_dma_direction(direction));
-	if (ops->sync_single_for_cpu)
-		ops->sync_single_for_cpu(hwdev, dma_handle, size, direction);
-	flush_write_buffers();
-}
-
-static inline void
-dma_sync_single_for_device(struct device *hwdev, dma_addr_t dma_handle,
-			   size_t size, int direction)
-{
-	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
-
-	BUG_ON(!valid_dma_direction(direction));
-	if (ops->sync_single_for_device)
-		ops->sync_single_for_device(hwdev, dma_handle, size, direction);
-	flush_write_buffers();
-}
-
-static inline void
-dma_sync_single_range_for_cpu(struct device *hwdev, dma_addr_t dma_handle,
-			      unsigned long offset, size_t size, int direction)
-{
-	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
-
-	BUG_ON(!valid_dma_direction(direction));
-	if (ops->sync_single_range_for_cpu)
-		ops->sync_single_range_for_cpu(hwdev, dma_handle, offset,
-					       size, direction);
-	flush_write_buffers();
-}
-
-static inline void
-dma_sync_single_range_for_device(struct device *hwdev, dma_addr_t dma_handle,
-				 unsigned long offset, size_t size,
-				 int direction)
-{
-	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
-
-	BUG_ON(!valid_dma_direction(direction));
-	if (ops->sync_single_range_for_device)
-		ops->sync_single_range_for_device(hwdev, dma_handle,
-						  offset, size, direction);
-	flush_write_buffers();
-}
-
-static inline void
-dma_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
-		    int nelems, int direction)
-{
-	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
-
-	BUG_ON(!valid_dma_direction(direction));
-	if (ops->sync_sg_for_cpu)
-		ops->sync_sg_for_cpu(hwdev, sg, nelems, direction);
-	flush_write_buffers();
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
-		       int nelems, int direction)
-{
-	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
-
-	BUG_ON(!valid_dma_direction(direction));
-	if (ops->sync_sg_for_device)
-		ops->sync_sg_for_device(hwdev, sg, nelems, direction);
-
-	flush_write_buffers();
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      size_t offset, size_t size,
-				      int direction)
-{
-	struct dma_mapping_ops *ops = get_dma_ops(dev);
-
-	BUG_ON(!valid_dma_direction(direction));
-	return ops->map_single(dev, page_to_phys(page) + offset,
-			       size, direction);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t addr,
-				  size_t size, int direction)
-{
-	dma_unmap_single(dev, addr, size, direction);
-}
-
-static inline void
-dma_cache_sync(struct device *dev, void *vaddr, size_t size,
-	enum dma_data_direction dir)
-{
-	flush_write_buffers();
-}
-
-static inline int dma_get_cache_alignment(void)
-{
-	/* no easy way to get cache size on all x86, so return the
-	 * maximum possible, to be safe */
-	return boot_cpu_data.x86_clflush_size;
-}
-
-static inline unsigned long dma_alloc_coherent_mask(struct device *dev,
-						    gfp_t gfp)
-{
-	unsigned long dma_mask = 0;
-
-	dma_mask = dev->coherent_dma_mask;
-	if (!dma_mask)
-		dma_mask = (gfp & GFP_DMA) ? DMA_24BIT_MASK : DMA_32BIT_MASK;
-
-	return dma_mask;
-}
-
-static inline gfp_t dma_alloc_coherent_gfp_flags(struct device *dev, gfp_t gfp)
-{
-#ifdef CONFIG_X86_64
-	unsigned long dma_mask = dma_alloc_coherent_mask(dev, gfp);
-
-	if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA))
-		gfp |= GFP_DMA32;
-#endif
-       return gfp;
-}
-
-static inline void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
-		gfp_t gfp)
-{
-	struct dma_mapping_ops *ops = get_dma_ops(dev);
-	void *memory;
-
-	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
-
-	if (dma_alloc_from_coherent(dev, size, dma_handle, &memory))
-		return memory;
-
-	if (!dev) {
-		dev = &x86_dma_fallback_dev;
-		gfp |= GFP_DMA;
-	}
-
-	if (!is_device_dma_capable(dev))
-		return NULL;
-
-	if (!ops->alloc_coherent)
-		return NULL;
-
-	return ops->alloc_coherent(dev, size, dma_handle,
-				   dma_alloc_coherent_gfp_flags(dev, gfp));
-}
-
-static inline void dma_free_coherent(struct device *dev, size_t size,
-				     void *vaddr, dma_addr_t bus)
-{
-	struct dma_mapping_ops *ops = get_dma_ops(dev);
-
-	WARN_ON(irqs_disabled());       /* for portability */
-
-	if (dma_release_from_coherent(dev, get_order(size), vaddr))
-		return;
-
-	if (ops->free_coherent)
-		ops->free_coherent(dev, size, vaddr, bus);
-}
-
-#endif
diff --git a/include/asm-x86/dma.h b/include/asm-x86/dma.h
deleted file mode 100644
index c9f7a4e..0000000
--- a/include/asm-x86/dma.h
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- */
-
-#ifndef ASM_X86__DMA_H
-#define ASM_X86__DMA_H
-
-#include <linux/spinlock.h>	/* And spinlocks */
-#include <asm/io.h>		/* need byte IO */
-#include <linux/delay.h>
-
-#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
-#define dma_outb	outb_p
-#else
-#define dma_outb	outb
-#endif
-
-#define dma_inb		inb
-
-/*
- * NOTES about DMA transfers:
- *
- *  controller 1: channels 0-3, byte operations, ports 00-1F
- *  controller 2: channels 4-7, word operations, ports C0-DF
- *
- *  - ALL registers are 8 bits only, regardless of transfer size
- *  - channel 4 is not used - cascades 1 into 2.
- *  - channels 0-3 are byte - addresses/counts are for physical bytes
- *  - channels 5-7 are word - addresses/counts are for physical words
- *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
- *  - transfer count loaded to registers is 1 less than actual count
- *  - controller 2 offsets are all even (2x offsets for controller 1)
- *  - page registers for 5-7 don't use data bit 0, represent 128K pages
- *  - page registers for 0-3 use bit 0, represent 64K pages
- *
- * DMA transfers are limited to the lower 16MB of _physical_ memory.
- * Note that addresses loaded into registers must be _physical_ addresses,
- * not logical addresses (which may differ if paging is active).
- *
- *  Address mapping for channels 0-3:
- *
- *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *   P7  ...  P0  A7 ... A0  A7 ... A0
- * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
- *
- *  Address mapping for channels 5-7:
- *
- *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
- *    |  ...  |   \   \   ... \  \  \  ... \  \
- *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
- *    |  ...  |     \   \   ... \  \  \  ... \
- *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
- * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
- *
- * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
- * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
- * the hardware level, so odd-byte transfers aren't possible).
- *
- * Transfer count (_not # bytes_) is limited to 64K, represented as actual
- * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
- * and up to 128K bytes may be transferred on channels 5-7 in one operation.
- *
- */
-
-#define MAX_DMA_CHANNELS	8
-
-#ifdef CONFIG_X86_32
-
-/* The maximum address that we can perform a DMA transfer to on this platform */
-#define MAX_DMA_ADDRESS      (PAGE_OFFSET + 0x1000000)
-
-#else
-
-/* 16MB ISA DMA zone */
-#define MAX_DMA_PFN   ((16 * 1024 * 1024) >> PAGE_SHIFT)
-
-/* 4GB broken PCI/AGP hardware bus master zone */
-#define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
-
-/* Compat define for old dma zone */
-#define MAX_DMA_ADDRESS ((unsigned long)__va(MAX_DMA_PFN << PAGE_SHIFT))
-
-#endif
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG		0x08	/* command register (w) */
-#define DMA1_STAT_REG		0x08	/* status register (r) */
-#define DMA1_REQ_REG		0x09    /* request register (w) */
-#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
-#define DMA1_MODE_REG		0x0B	/* mode register (w) */
-#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG		0x0D    /* Temporary Register (r) */
-#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
-#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
-#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
-
-#define DMA2_CMD_REG		0xD0	/* command register (w) */
-#define DMA2_STAT_REG		0xD0	/* status register (r) */
-#define DMA2_REQ_REG		0xD2    /* request register (w) */
-#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
-#define DMA2_MODE_REG		0xD6	/* mode register (w) */
-#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG		0xDA    /* Temporary Register (r) */
-#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
-#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
-#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
-
-#define DMA_ADDR_0		0x00    /* DMA address registers */
-#define DMA_ADDR_1		0x02
-#define DMA_ADDR_2		0x04
-#define DMA_ADDR_3		0x06
-#define DMA_ADDR_4		0xC0
-#define DMA_ADDR_5		0xC4
-#define DMA_ADDR_6		0xC8
-#define DMA_ADDR_7		0xCC
-
-#define DMA_CNT_0		0x01    /* DMA count registers */
-#define DMA_CNT_1		0x03
-#define DMA_CNT_2		0x05
-#define DMA_CNT_3		0x07
-#define DMA_CNT_4		0xC2
-#define DMA_CNT_5		0xC6
-#define DMA_CNT_6		0xCA
-#define DMA_CNT_7		0xCE
-
-#define DMA_PAGE_0		0x87    /* DMA page registers */
-#define DMA_PAGE_1		0x83
-#define DMA_PAGE_2		0x81
-#define DMA_PAGE_3		0x82
-#define DMA_PAGE_5		0x8B
-#define DMA_PAGE_6		0x89
-#define DMA_PAGE_7		0x8A
-
-/* I/O to memory, no autoinit, increment, single mode */
-#define DMA_MODE_READ		0x44
-/* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_WRITE		0x48
-/* pass thru DREQ->HRQ, DACK<-HLDA only */
-#define DMA_MODE_CASCADE	0xC0
-
-#define DMA_AUTOINIT		0x10
-
-
-extern spinlock_t  dma_spin_lock;
-
-static inline unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&dma_spin_lock, flags);
-	return flags;
-}
-
-static inline void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static inline void enable_dma(unsigned int dmanr)
-{
-	if (dmanr <= 3)
-		dma_outb(dmanr, DMA1_MASK_REG);
-	else
-		dma_outb(dmanr & 3, DMA2_MASK_REG);
-}
-
-static inline void disable_dma(unsigned int dmanr)
-{
-	if (dmanr <= 3)
-		dma_outb(dmanr | 4, DMA1_MASK_REG);
-	else
-		dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static inline void clear_dma_ff(unsigned int dmanr)
-{
-	if (dmanr <= 3)
-		dma_outb(0, DMA1_CLEAR_FF_REG);
-	else
-		dma_outb(0, DMA2_CLEAR_FF_REG);
-}
-
-/* set mode (above) for a specific DMA channel */
-static inline void set_dma_mode(unsigned int dmanr, char mode)
-{
-	if (dmanr <= 3)
-		dma_outb(mode | dmanr, DMA1_MODE_REG);
-	else
-		dma_outb(mode | (dmanr & 3), DMA2_MODE_REG);
-}
-
-/* Set only the page register bits of the transfer address.
- * This is used for successive transfers when we know the contents of
- * the lower 16 bits of the DMA current address register, but a 64k boundary
- * may have been crossed.
- */
-static inline void set_dma_page(unsigned int dmanr, char pagenr)
-{
-	switch (dmanr) {
-	case 0:
-		dma_outb(pagenr, DMA_PAGE_0);
-		break;
-	case 1:
-		dma_outb(pagenr, DMA_PAGE_1);
-		break;
-	case 2:
-		dma_outb(pagenr, DMA_PAGE_2);
-		break;
-	case 3:
-		dma_outb(pagenr, DMA_PAGE_3);
-		break;
-	case 5:
-		dma_outb(pagenr & 0xfe, DMA_PAGE_5);
-		break;
-	case 6:
-		dma_outb(pagenr & 0xfe, DMA_PAGE_6);
-		break;
-	case 7:
-		dma_outb(pagenr & 0xfe, DMA_PAGE_7);
-		break;
-	}
-}
-
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static inline void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-	set_dma_page(dmanr, a>>16);
-	if (dmanr <= 3)  {
-		dma_outb(a & 0xff, ((dmanr & 3) << 1) + IO_DMA1_BASE);
-		dma_outb((a >> 8) & 0xff, ((dmanr & 3) << 1) + IO_DMA1_BASE);
-	}  else  {
-		dma_outb((a >> 1) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
-		dma_outb((a >> 9) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
-	}
-}
-
-
-/* Set transfer size (max 64k for DMA0..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static inline void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-	count--;
-	if (dmanr <= 3)  {
-		dma_outb(count & 0xff, ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
-		dma_outb((count >> 8) & 0xff,
-			 ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
-	} else {
-		dma_outb((count >> 1) & 0xff,
-			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
-		dma_outb((count >> 9) & 0xff,
-			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
-	}
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static inline int get_dma_residue(unsigned int dmanr)
-{
-	unsigned int io_port;
-	/* using short to get 16-bit wrap around */
-	unsigned short count;
-
-	io_port = (dmanr <= 3) ? ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE
-		: ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE;
-
-	count = 1 + dma_inb(io_port);
-	count += dma_inb(io_port) << 8;
-
-	return (dmanr <= 3) ? count : (count << 1);
-}
-
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char *device_id);
-extern void free_dma(unsigned int dmanr);
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy	(0)
-#endif
-
-#endif /* ASM_X86__DMA_H */
diff --git a/include/asm-x86/dmi.h b/include/asm-x86/dmi.h
deleted file mode 100644
index 1cff6fe..0000000
--- a/include/asm-x86/dmi.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef ASM_X86__DMI_H
-#define ASM_X86__DMI_H
-
-#include <asm/io.h>
-
-#define DMI_MAX_DATA 2048
-
-extern int dmi_alloc_index;
-extern char dmi_alloc_data[DMI_MAX_DATA];
-
-/* This is so early that there is no good way to allocate dynamic memory.
-   Allocate data in an BSS array. */
-static inline void *dmi_alloc(unsigned len)
-{
-	int idx = dmi_alloc_index;
-	if ((dmi_alloc_index + len) > DMI_MAX_DATA)
-		return NULL;
-	dmi_alloc_index += len;
-	return dmi_alloc_data + idx;
-}
-
-/* Use early IO mappings for DMI because it's initialized early */
-#define dmi_ioremap early_ioremap
-#define dmi_iounmap early_iounmap
-
-#endif /* ASM_X86__DMI_H */
diff --git a/include/asm-x86/ds.h b/include/asm-x86/ds.h
deleted file mode 100644
index c3c953a..0000000
--- a/include/asm-x86/ds.h
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * Debug Store (DS) support
- *
- * This provides a low-level interface to the hardware's Debug Store
- * feature that is used for branch trace store (BTS) and
- * precise-event based sampling (PEBS).
- *
- * It manages:
- * - per-thread and per-cpu allocation of BTS and PEBS
- * - buffer memory allocation (optional)
- * - buffer overflow handling
- * - buffer access
- *
- * It assumes:
- * - get_task_struct on all parameter tasks
- * - current is allowed to trace parameter tasks
- *
- *
- * Copyright (C) 2007-2008 Intel Corporation.
- * Markus Metzger <markus.t.metzger@intel.com>, 2007-2008
- */
-
-#ifndef ASM_X86__DS_H
-#define ASM_X86__DS_H
-
-#ifdef CONFIG_X86_DS
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-
-struct task_struct;
-
-/*
- * Request BTS or PEBS
- *
- * Due to alignement constraints, the actual buffer may be slightly
- * smaller than the requested or provided buffer.
- *
- * Returns 0 on success; -Eerrno otherwise
- *
- * task: the task to request recording for;
- *       NULL for per-cpu recording on the current cpu
- * base: the base pointer for the (non-pageable) buffer;
- *       NULL if buffer allocation requested
- * size: the size of the requested or provided buffer
- * ovfl: pointer to a function to be called on buffer overflow;
- *       NULL if cyclic buffer requested
- */
-typedef void (*ds_ovfl_callback_t)(struct task_struct *);
-extern int ds_request_bts(struct task_struct *task, void *base, size_t size,
-			  ds_ovfl_callback_t ovfl);
-extern int ds_request_pebs(struct task_struct *task, void *base, size_t size,
-			   ds_ovfl_callback_t ovfl);
-
-/*
- * Release BTS or PEBS resources
- *
- * Frees buffers allocated on ds_request.
- *
- * Returns 0 on success; -Eerrno otherwise
- *
- * task: the task to release resources for;
- *       NULL to release resources for the current cpu
- */
-extern int ds_release_bts(struct task_struct *task);
-extern int ds_release_pebs(struct task_struct *task);
-
-/*
- * Return the (array) index of the write pointer.
- * (assuming an array of BTS/PEBS records)
- *
- * Returns -Eerrno on error
- *
- * task: the task to access;
- *       NULL to access the current cpu
- * pos (out): if not NULL, will hold the result
- */
-extern int ds_get_bts_index(struct task_struct *task, size_t *pos);
-extern int ds_get_pebs_index(struct task_struct *task, size_t *pos);
-
-/*
- * Return the (array) index one record beyond the end of the array.
- * (assuming an array of BTS/PEBS records)
- *
- * Returns -Eerrno on error
- *
- * task: the task to access;
- *       NULL to access the current cpu
- * pos (out): if not NULL, will hold the result
- */
-extern int ds_get_bts_end(struct task_struct *task, size_t *pos);
-extern int ds_get_pebs_end(struct task_struct *task, size_t *pos);
-
-/*
- * Provide a pointer to the BTS/PEBS record at parameter index.
- * (assuming an array of BTS/PEBS records)
- *
- * The pointer points directly into the buffer. The user is
- * responsible for copying the record.
- *
- * Returns the size of a single record on success; -Eerrno on error
- *
- * task: the task to access;
- *       NULL to access the current cpu
- * index: the index of the requested record
- * record (out): pointer to the requested record
- */
-extern int ds_access_bts(struct task_struct *task,
-			 size_t index, const void **record);
-extern int ds_access_pebs(struct task_struct *task,
-			  size_t index, const void **record);
-
-/*
- * Write one or more BTS/PEBS records at the write pointer index and
- * advance the write pointer.
- *
- * If size is not a multiple of the record size, trailing bytes are
- * zeroed out.
- *
- * May result in one or more overflow notifications.
- *
- * If called during overflow handling, that is, with index >=
- * interrupt threshold, the write will wrap around.
- *
- * An overflow notification is given if and when the interrupt
- * threshold is reached during or after the write.
- *
- * Returns the number of bytes written or -Eerrno.
- *
- * task: the task to access;
- *       NULL to access the current cpu
- * buffer: the buffer to write
- * size: the size of the buffer
- */
-extern int ds_write_bts(struct task_struct *task,
-			const void *buffer, size_t size);
-extern int ds_write_pebs(struct task_struct *task,
-			 const void *buffer, size_t size);
-
-/*
- * Same as ds_write_bts/pebs, but omit ownership checks.
- *
- * This is needed to have some other task than the owner of the
- * BTS/PEBS buffer or the parameter task itself write into the
- * respective buffer.
- */
-extern int ds_unchecked_write_bts(struct task_struct *task,
-				  const void *buffer, size_t size);
-extern int ds_unchecked_write_pebs(struct task_struct *task,
-				   const void *buffer, size_t size);
-
-/*
- * Reset the write pointer of the BTS/PEBS buffer.
- *
- * Returns 0 on success; -Eerrno on error
- *
- * task: the task to access;
- *       NULL to access the current cpu
- */
-extern int ds_reset_bts(struct task_struct *task);
-extern int ds_reset_pebs(struct task_struct *task);
-
-/*
- * Clear the BTS/PEBS buffer and reset the write pointer.
- * The entire buffer will be zeroed out.
- *
- * Returns 0 on success; -Eerrno on error
- *
- * task: the task to access;
- *       NULL to access the current cpu
- */
-extern int ds_clear_bts(struct task_struct *task);
-extern int ds_clear_pebs(struct task_struct *task);
-
-/*
- * Provide the PEBS counter reset value.
- *
- * Returns 0 on success; -Eerrno on error
- *
- * task: the task to access;
- *       NULL to access the current cpu
- * value (out): the counter reset value
- */
-extern int ds_get_pebs_reset(struct task_struct *task, u64 *value);
-
-/*
- * Set the PEBS counter reset value.
- *
- * Returns 0 on success; -Eerrno on error
- *
- * task: the task to access;
- *       NULL to access the current cpu
- * value: the new counter reset value
- */
-extern int ds_set_pebs_reset(struct task_struct *task, u64 value);
-
-/*
- * Initialization
- */
-struct cpuinfo_x86;
-extern void __cpuinit ds_init_intel(struct cpuinfo_x86 *);
-
-
-
-/*
- * The DS context - part of struct thread_struct.
- */
-struct ds_context {
-	/* pointer to the DS configuration; goes into MSR_IA32_DS_AREA */
-	unsigned char *ds;
-	/* the owner of the BTS and PEBS configuration, respectively */
-	struct task_struct *owner[2];
-	/* buffer overflow notification function for BTS and PEBS */
-	ds_ovfl_callback_t callback[2];
-	/* the original buffer address */
-	void *buffer[2];
-	/* the number of allocated pages for on-request allocated buffers */
-	unsigned int pages[2];
-	/* use count */
-	unsigned long count;
-	/* a pointer to the context location inside the thread_struct
-	 * or the per_cpu context array */
-	struct ds_context **this;
-	/* a pointer to the task owning this context, or NULL, if the
-	 * context is owned by a cpu */
-	struct task_struct *task;
-};
-
-/* called by exit_thread() to free leftover contexts */
-extern void ds_free(struct ds_context *context);
-
-#else /* CONFIG_X86_DS */
-
-#define ds_init_intel(config) do {} while (0)
-
-#endif /* CONFIG_X86_DS */
-#endif /* ASM_X86__DS_H */
diff --git a/include/asm-x86/dwarf2.h b/include/asm-x86/dwarf2.h
deleted file mode 100644
index 21d1bc3..0000000
--- a/include/asm-x86/dwarf2.h
+++ /dev/null
@@ -1,61 +0,0 @@
-#ifndef ASM_X86__DWARF2_H
-#define ASM_X86__DWARF2_H
-
-#ifndef __ASSEMBLY__
-#warning "asm/dwarf2.h should be only included in pure assembly files"
-#endif
-
-/*
-   Macros for dwarf2 CFI unwind table entries.
-   See "as.info" for details on these pseudo ops. Unfortunately
-   they are only supported in very new binutils, so define them
-   away for older version.
- */
-
-#ifdef CONFIG_AS_CFI
-
-#define CFI_STARTPROC .cfi_startproc
-#define CFI_ENDPROC .cfi_endproc
-#define CFI_DEF_CFA .cfi_def_cfa
-#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register
-#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset
-#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset
-#define CFI_OFFSET .cfi_offset
-#define CFI_REL_OFFSET .cfi_rel_offset
-#define CFI_REGISTER .cfi_register
-#define CFI_RESTORE .cfi_restore
-#define CFI_REMEMBER_STATE .cfi_remember_state
-#define CFI_RESTORE_STATE .cfi_restore_state
-#define CFI_UNDEFINED .cfi_undefined
-
-#ifdef CONFIG_AS_CFI_SIGNAL_FRAME
-#define CFI_SIGNAL_FRAME .cfi_signal_frame
-#else
-#define CFI_SIGNAL_FRAME
-#endif
-
-#else
-
-/* Due to the structure of pre-exisiting code, don't use assembler line
-   comment character # to ignore the arguments. Instead, use a dummy macro. */
-.macro cfi_ignore a=0, b=0, c=0, d=0
-.endm
-
-#define CFI_STARTPROC	cfi_ignore
-#define CFI_ENDPROC	cfi_ignore
-#define CFI_DEF_CFA	cfi_ignore
-#define CFI_DEF_CFA_REGISTER	cfi_ignore
-#define CFI_DEF_CFA_OFFSET	cfi_ignore
-#define CFI_ADJUST_CFA_OFFSET	cfi_ignore
-#define CFI_OFFSET	cfi_ignore
-#define CFI_REL_OFFSET	cfi_ignore
-#define CFI_REGISTER	cfi_ignore
-#define CFI_RESTORE	cfi_ignore
-#define CFI_REMEMBER_STATE cfi_ignore
-#define CFI_RESTORE_STATE cfi_ignore
-#define CFI_UNDEFINED cfi_ignore
-#define CFI_SIGNAL_FRAME cfi_ignore
-
-#endif
-
-#endif /* ASM_X86__DWARF2_H */
diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h
deleted file mode 100644
index 5abbdec..0000000
--- a/include/asm-x86/e820.h
+++ /dev/null
@@ -1,146 +0,0 @@
-#ifndef ASM_X86__E820_H
-#define ASM_X86__E820_H
-#define E820MAP	0x2d0		/* our map */
-#define E820MAX	128		/* number of entries in E820MAP */
-
-/*
- * Legacy E820 BIOS limits us to 128 (E820MAX) nodes due to the
- * constrained space in the zeropage.  If we have more nodes than
- * that, and if we've booted off EFI firmware, then the EFI tables
- * passed us from the EFI firmware can list more nodes.  Size our
- * internal memory map tables to have room for these additional
- * nodes, based on up to three entries per node for which the
- * kernel was built: MAX_NUMNODES == (1 << CONFIG_NODES_SHIFT),
- * plus E820MAX, allowing space for the possible duplicate E820
- * entries that might need room in the same arrays, prior to the
- * call to sanitize_e820_map() to remove duplicates.  The allowance
- * of three memory map entries per node is "enough" entries for
- * the initial hardware platform motivating this mechanism to make
- * use of additional EFI map entries.  Future platforms may want
- * to allow more than three entries per node or otherwise refine
- * this size.
- */
-
-/*
- * Odd: 'make headers_check' complains about numa.h if I try
- * to collapse the next two #ifdef lines to a single line:
- *	#if defined(__KERNEL__) && defined(CONFIG_EFI)
- */
-#ifdef __KERNEL__
-#ifdef CONFIG_EFI
-#include <linux/numa.h>
-#define E820_X_MAX (E820MAX + 3 * MAX_NUMNODES)
-#else	/* ! CONFIG_EFI */
-#define E820_X_MAX E820MAX
-#endif
-#else	/* ! __KERNEL__ */
-#define E820_X_MAX E820MAX
-#endif
-
-#define E820NR	0x1e8		/* # entries in E820MAP */
-
-#define E820_RAM	1
-#define E820_RESERVED	2
-#define E820_ACPI	3
-#define E820_NVS	4
-#define E820_UNUSABLE	5
-
-/* reserved RAM used by kernel itself */
-#define E820_RESERVED_KERN        128
-
-#ifndef __ASSEMBLY__
-struct e820entry {
-	__u64 addr;	/* start of memory segment */
-	__u64 size;	/* size of memory segment */
-	__u32 type;	/* type of memory segment */
-} __attribute__((packed));
-
-struct e820map {
-	__u32 nr_map;
-	struct e820entry map[E820_X_MAX];
-};
-
-#ifdef __KERNEL__
-/* see comment in arch/x86/kernel/e820.c */
-extern struct e820map e820;
-extern struct e820map e820_saved;
-
-extern unsigned long pci_mem_start;
-extern int e820_any_mapped(u64 start, u64 end, unsigned type);
-extern int e820_all_mapped(u64 start, u64 end, unsigned type);
-extern void e820_add_region(u64 start, u64 size, int type);
-extern void e820_print_map(char *who);
-extern int
-sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, int *pnr_map);
-extern u64 e820_update_range(u64 start, u64 size, unsigned old_type,
-			       unsigned new_type);
-extern u64 e820_remove_range(u64 start, u64 size, unsigned old_type,
-			     int checktype);
-extern void update_e820(void);
-extern void e820_setup_gap(void);
-extern int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
-			unsigned long start_addr, unsigned long long end_addr);
-struct setup_data;
-extern void parse_e820_ext(struct setup_data *data, unsigned long pa_data);
-
-#if defined(CONFIG_X86_64) || \
-	(defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION))
-extern void e820_mark_nosave_regions(unsigned long limit_pfn);
-#else
-static inline void e820_mark_nosave_regions(unsigned long limit_pfn)
-{
-}
-#endif
-
-#ifdef CONFIG_MEMTEST
-extern void early_memtest(unsigned long start, unsigned long end);
-#else
-static inline void early_memtest(unsigned long start, unsigned long end)
-{
-}
-#endif
-
-extern unsigned long end_user_pfn;
-
-extern u64 find_e820_area(u64 start, u64 end, u64 size, u64 align);
-extern u64 find_e820_area_size(u64 start, u64 *sizep, u64 align);
-extern void reserve_early(u64 start, u64 end, char *name);
-extern void reserve_early_overlap_ok(u64 start, u64 end, char *name);
-extern void free_early(u64 start, u64 end);
-extern void early_res_to_bootmem(u64 start, u64 end);
-extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);
-
-extern unsigned long e820_end_of_ram_pfn(void);
-extern unsigned long e820_end_of_low_ram_pfn(void);
-extern int e820_find_active_region(const struct e820entry *ei,
-				  unsigned long start_pfn,
-				  unsigned long last_pfn,
-				  unsigned long *ei_startpfn,
-				  unsigned long *ei_endpfn);
-extern void e820_register_active_regions(int nid, unsigned long start_pfn,
-					 unsigned long end_pfn);
-extern u64 e820_hole_size(u64 start, u64 end);
-extern void finish_e820_parsing(void);
-extern void e820_reserve_resources(void);
-extern void e820_reserve_resources_late(void);
-extern void setup_memory_map(void);
-extern char *default_machine_specific_memory_setup(void);
-extern char *machine_specific_memory_setup(void);
-extern char *memory_setup(void);
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-
-#define ISA_START_ADDRESS	0xa0000
-#define ISA_END_ADDRESS		0x100000
-#define is_ISA_range(s, e) ((s) >= ISA_START_ADDRESS && (e) < ISA_END_ADDRESS)
-
-#define BIOS_BEGIN		0x000a0000
-#define BIOS_END		0x00100000
-
-#ifdef __KERNEL__
-#include <linux/ioport.h>
-
-#define HIGH_MEMORY	(1024*1024)
-#endif /* __KERNEL__ */
-
-#endif /* ASM_X86__E820_H */
diff --git a/include/asm-x86/edac.h b/include/asm-x86/edac.h
deleted file mode 100644
index 9493c5b..0000000
--- a/include/asm-x86/edac.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef ASM_X86__EDAC_H
-#define ASM_X86__EDAC_H
-
-/* ECC atomic, DMA, SMP and interrupt safe scrub function */
-
-static inline void atomic_scrub(void *va, u32 size)
-{
-	u32 i, *virt_addr = va;
-
-	/*
-	 * Very carefully read and write to memory atomically so we
-	 * are interrupt, DMA and SMP safe.
-	 */
-	for (i = 0; i < size / 4; i++, virt_addr++)
-		asm volatile("lock; addl $0, %0"::"m" (*virt_addr));
-}
-
-#endif /* ASM_X86__EDAC_H */
diff --git a/include/asm-x86/efi.h b/include/asm-x86/efi.h
deleted file mode 100644
index 313438e..0000000
--- a/include/asm-x86/efi.h
+++ /dev/null
@@ -1,110 +0,0 @@
-#ifndef ASM_X86__EFI_H
-#define ASM_X86__EFI_H
-
-#ifdef CONFIG_X86_32
-
-extern unsigned long asmlinkage efi_call_phys(void *, ...);
-
-#define efi_call_phys0(f)		efi_call_phys(f)
-#define efi_call_phys1(f, a1)		efi_call_phys(f, a1)
-#define efi_call_phys2(f, a1, a2)	efi_call_phys(f, a1, a2)
-#define efi_call_phys3(f, a1, a2, a3)	efi_call_phys(f, a1, a2, a3)
-#define efi_call_phys4(f, a1, a2, a3, a4)	\
-	efi_call_phys(f, a1, a2, a3, a4)
-#define efi_call_phys5(f, a1, a2, a3, a4, a5)	\
-	efi_call_phys(f, a1, a2, a3, a4, a5)
-#define efi_call_phys6(f, a1, a2, a3, a4, a5, a6)	\
-	efi_call_phys(f, a1, a2, a3, a4, a5, a6)
-/*
- * Wrap all the virtual calls in a way that forces the parameters on the stack.
- */
-
-#define efi_call_virt(f, args...) \
-	((efi_##f##_t __attribute__((regparm(0)))*)efi.systab->runtime->f)(args)
-
-#define efi_call_virt0(f)		efi_call_virt(f)
-#define efi_call_virt1(f, a1)		efi_call_virt(f, a1)
-#define efi_call_virt2(f, a1, a2)	efi_call_virt(f, a1, a2)
-#define efi_call_virt3(f, a1, a2, a3)	efi_call_virt(f, a1, a2, a3)
-#define efi_call_virt4(f, a1, a2, a3, a4)	\
-	efi_call_virt(f, a1, a2, a3, a4)
-#define efi_call_virt5(f, a1, a2, a3, a4, a5)	\
-	efi_call_virt(f, a1, a2, a3, a4, a5)
-#define efi_call_virt6(f, a1, a2, a3, a4, a5, a6)	\
-	efi_call_virt(f, a1, a2, a3, a4, a5, a6)
-
-#define efi_ioremap(addr, size)			ioremap_cache(addr, size)
-
-#else /* !CONFIG_X86_32 */
-
-#define MAX_EFI_IO_PAGES	100
-
-extern u64 efi_call0(void *fp);
-extern u64 efi_call1(void *fp, u64 arg1);
-extern u64 efi_call2(void *fp, u64 arg1, u64 arg2);
-extern u64 efi_call3(void *fp, u64 arg1, u64 arg2, u64 arg3);
-extern u64 efi_call4(void *fp, u64 arg1, u64 arg2, u64 arg3, u64 arg4);
-extern u64 efi_call5(void *fp, u64 arg1, u64 arg2, u64 arg3,
-		     u64 arg4, u64 arg5);
-extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3,
-		     u64 arg4, u64 arg5, u64 arg6);
-
-#define efi_call_phys0(f)			\
-	efi_call0((void *)(f))
-#define efi_call_phys1(f, a1)			\
-	efi_call1((void *)(f), (u64)(a1))
-#define efi_call_phys2(f, a1, a2)			\
-	efi_call2((void *)(f), (u64)(a1), (u64)(a2))
-#define efi_call_phys3(f, a1, a2, a3)				\
-	efi_call3((void *)(f), (u64)(a1), (u64)(a2), (u64)(a3))
-#define efi_call_phys4(f, a1, a2, a3, a4)				\
-	efi_call4((void *)(f), (u64)(a1), (u64)(a2), (u64)(a3),		\
-		  (u64)(a4))
-#define efi_call_phys5(f, a1, a2, a3, a4, a5)				\
-	efi_call5((void *)(f), (u64)(a1), (u64)(a2), (u64)(a3),		\
-		  (u64)(a4), (u64)(a5))
-#define efi_call_phys6(f, a1, a2, a3, a4, a5, a6)			\
-	efi_call6((void *)(f), (u64)(a1), (u64)(a2), (u64)(a3),		\
-		  (u64)(a4), (u64)(a5), (u64)(a6))
-
-#define efi_call_virt0(f)				\
-	efi_call0((void *)(efi.systab->runtime->f))
-#define efi_call_virt1(f, a1)					\
-	efi_call1((void *)(efi.systab->runtime->f), (u64)(a1))
-#define efi_call_virt2(f, a1, a2)					\
-	efi_call2((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2))
-#define efi_call_virt3(f, a1, a2, a3)					\
-	efi_call3((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
-		  (u64)(a3))
-#define efi_call_virt4(f, a1, a2, a3, a4)				\
-	efi_call4((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
-		  (u64)(a3), (u64)(a4))
-#define efi_call_virt5(f, a1, a2, a3, a4, a5)				\
-	efi_call5((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
-		  (u64)(a3), (u64)(a4), (u64)(a5))
-#define efi_call_virt6(f, a1, a2, a3, a4, a5, a6)			\
-	efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
-		  (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6))
-
-extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size);
-
-#endif /* CONFIG_X86_32 */
-
-extern void efi_reserve_early(void);
-extern void efi_call_phys_prelog(void);
-extern void efi_call_phys_epilog(void);
-
-#ifndef CONFIG_EFI
-/*
- * IF EFI is not configured, have the EFI calls return -ENOSYS.
- */
-#define efi_call0(_f)					(-ENOSYS)
-#define efi_call1(_f, _a1)				(-ENOSYS)
-#define efi_call2(_f, _a1, _a2)				(-ENOSYS)
-#define efi_call3(_f, _a1, _a2, _a3)			(-ENOSYS)
-#define efi_call4(_f, _a1, _a2, _a3, _a4)		(-ENOSYS)
-#define efi_call5(_f, _a1, _a2, _a3, _a4, _a5)		(-ENOSYS)
-#define efi_call6(_f, _a1, _a2, _a3, _a4, _a5, _a6)	(-ENOSYS)
-#endif /* CONFIG_EFI */
-
-#endif /* ASM_X86__EFI_H */
diff --git a/include/asm-x86/elf.h b/include/asm-x86/elf.h
deleted file mode 100644
index 26bc15f..0000000
--- a/include/asm-x86/elf.h
+++ /dev/null
@@ -1,336 +0,0 @@
-#ifndef ASM_X86__ELF_H
-#define ASM_X86__ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-#include <asm/auxvec.h>
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_i387_struct elf_fpregset_t;
-
-#ifdef __i386__
-
-typedef struct user_fxsr_struct elf_fpxregset_t;
-
-#define R_386_NONE	0
-#define R_386_32	1
-#define R_386_PC32	2
-#define R_386_GOT32	3
-#define R_386_PLT32	4
-#define R_386_COPY	5
-#define R_386_GLOB_DAT	6
-#define R_386_JMP_SLOT	7
-#define R_386_RELATIVE	8
-#define R_386_GOTOFF	9
-#define R_386_GOTPC	10
-#define R_386_NUM	11
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#define ELF_DATA	ELFDATA2LSB
-#define ELF_ARCH	EM_386
-
-#else
-
-/* x86-64 relocation types */
-#define R_X86_64_NONE		0	/* No reloc */
-#define R_X86_64_64		1	/* Direct 64 bit  */
-#define R_X86_64_PC32		2	/* PC relative 32 bit signed */
-#define R_X86_64_GOT32		3	/* 32 bit GOT entry */
-#define R_X86_64_PLT32		4	/* 32 bit PLT address */
-#define R_X86_64_COPY		5	/* Copy symbol at runtime */
-#define R_X86_64_GLOB_DAT	6	/* Create GOT entry */
-#define R_X86_64_JUMP_SLOT	7	/* Create PLT entry */
-#define R_X86_64_RELATIVE	8	/* Adjust by program base */
-#define R_X86_64_GOTPCREL	9	/* 32 bit signed pc relative
-					   offset to GOT */
-#define R_X86_64_32		10	/* Direct 32 bit zero extended */
-#define R_X86_64_32S		11	/* Direct 32 bit sign extended */
-#define R_X86_64_16		12	/* Direct 16 bit zero extended */
-#define R_X86_64_PC16		13	/* 16 bit sign extended pc relative */
-#define R_X86_64_8		14	/* Direct 8 bit sign extended  */
-#define R_X86_64_PC8		15	/* 8 bit sign extended pc relative */
-
-#define R_X86_64_NUM		16
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS64
-#define ELF_DATA	ELFDATA2LSB
-#define ELF_ARCH	EM_X86_64
-
-#endif
-
-#include <asm/vdso.h>
-
-extern unsigned int vdso_enabled;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch_ia32(x) \
-	(((x)->e_machine == EM_386) || ((x)->e_machine == EM_486))
-
-#include <asm/processor.h>
-#include <asm/system.h>
-
-#ifdef CONFIG_X86_32
-#include <asm/desc.h>
-
-#define elf_check_arch(x)	elf_check_arch_ia32(x)
-
-/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program starts %edx
-   contains a pointer to a function which might be registered using `atexit'.
-   This provides a mean for the dynamic linker to call DT_FINI functions for
-   shared libraries that have been loaded before the code runs.
-
-   A value of 0 tells we have no such handler.
-
-   We might as well make sure everything else is cleared too (except for %esp),
-   just to make things more deterministic.
- */
-#define ELF_PLAT_INIT(_r, load_addr)		\
-	do {					\
-	_r->bx = 0; _r->cx = 0; _r->dx = 0;	\
-	_r->si = 0; _r->di = 0; _r->bp = 0;	\
-	_r->ax = 0;				\
-} while (0)
-
-/*
- * regs is struct pt_regs, pr_reg is elf_gregset_t (which is
- * now struct_user_regs, they are different)
- */
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs)	\
-do {						\
-	pr_reg[0] = regs->bx;			\
-	pr_reg[1] = regs->cx;			\
-	pr_reg[2] = regs->dx;			\
-	pr_reg[3] = regs->si;			\
-	pr_reg[4] = regs->di;			\
-	pr_reg[5] = regs->bp;			\
-	pr_reg[6] = regs->ax;			\
-	pr_reg[7] = regs->ds & 0xffff;		\
-	pr_reg[8] = regs->es & 0xffff;		\
-	pr_reg[9] = regs->fs & 0xffff;		\
-	savesegment(gs, pr_reg[10]);		\
-	pr_reg[11] = regs->orig_ax;		\
-	pr_reg[12] = regs->ip;			\
-	pr_reg[13] = regs->cs & 0xffff;		\
-	pr_reg[14] = regs->flags;		\
-	pr_reg[15] = regs->sp;			\
-	pr_reg[16] = regs->ss & 0xffff;		\
-} while (0);
-
-#define ELF_PLATFORM	(utsname()->machine)
-#define set_personality_64bit()	do { } while (0)
-
-#else /* CONFIG_X86_32 */
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x)			\
-	((x)->e_machine == EM_X86_64)
-
-#define compat_elf_check_arch(x)	elf_check_arch_ia32(x)
-
-static inline void start_ia32_thread(struct pt_regs *regs, u32 ip, u32 sp)
-{
-	loadsegment(fs, 0);
-	loadsegment(ds, __USER32_DS);
-	loadsegment(es, __USER32_DS);
-	load_gs_index(0);
-	regs->ip = ip;
-	regs->sp = sp;
-	regs->flags = X86_EFLAGS_IF;
-	regs->cs = __USER32_CS;
-	regs->ss = __USER32_DS;
-}
-
-static inline void elf_common_init(struct thread_struct *t,
-				   struct pt_regs *regs, const u16 ds)
-{
-	regs->ax = regs->bx = regs->cx = regs->dx = 0;
-	regs->si = regs->di = regs->bp = 0;
-	regs->r8 = regs->r9 = regs->r10 = regs->r11 = 0;
-	regs->r12 = regs->r13 = regs->r14 = regs->r15 = 0;
-	t->fs = t->gs = 0;
-	t->fsindex = t->gsindex = 0;
-	t->ds = t->es = ds;
-}
-
-#define ELF_PLAT_INIT(_r, load_addr)			\
-do {							\
-	elf_common_init(&current->thread, _r, 0);	\
-	clear_thread_flag(TIF_IA32);			\
-} while (0)
-
-#define	COMPAT_ELF_PLAT_INIT(regs, load_addr)		\
-	elf_common_init(&current->thread, regs, __USER_DS)
-
-#define	compat_start_thread(regs, ip, sp)		\
-do {							\
-	start_ia32_thread(regs, ip, sp);		\
-	set_fs(USER_DS);				\
-} while (0)
-
-#define COMPAT_SET_PERSONALITY(ex)			\
-do {							\
-	if (test_thread_flag(TIF_IA32))			\
-		clear_thread_flag(TIF_ABI_PENDING);	\
-	else						\
-		set_thread_flag(TIF_ABI_PENDING);	\
-	current->personality |= force_personality32;	\
-} while (0)
-
-#define COMPAT_ELF_PLATFORM			("i686")
-
-/*
- * regs is struct pt_regs, pr_reg is elf_gregset_t (which is
- * now struct_user_regs, they are different). Assumes current is the process
- * getting dumped.
- */
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs)			\
-do {								\
-	unsigned v;						\
-	(pr_reg)[0] = (regs)->r15;				\
-	(pr_reg)[1] = (regs)->r14;				\
-	(pr_reg)[2] = (regs)->r13;				\
-	(pr_reg)[3] = (regs)->r12;				\
-	(pr_reg)[4] = (regs)->bp;				\
-	(pr_reg)[5] = (regs)->bx;				\
-	(pr_reg)[6] = (regs)->r11;				\
-	(pr_reg)[7] = (regs)->r10;				\
-	(pr_reg)[8] = (regs)->r9;				\
-	(pr_reg)[9] = (regs)->r8;				\
-	(pr_reg)[10] = (regs)->ax;				\
-	(pr_reg)[11] = (regs)->cx;				\
-	(pr_reg)[12] = (regs)->dx;				\
-	(pr_reg)[13] = (regs)->si;				\
-	(pr_reg)[14] = (regs)->di;				\
-	(pr_reg)[15] = (regs)->orig_ax;				\
-	(pr_reg)[16] = (regs)->ip;				\
-	(pr_reg)[17] = (regs)->cs;				\
-	(pr_reg)[18] = (regs)->flags;				\
-	(pr_reg)[19] = (regs)->sp;				\
-	(pr_reg)[20] = (regs)->ss;				\
-	(pr_reg)[21] = current->thread.fs;			\
-	(pr_reg)[22] = current->thread.gs;			\
-	asm("movl %%ds,%0" : "=r" (v)); (pr_reg)[23] = v;	\
-	asm("movl %%es,%0" : "=r" (v)); (pr_reg)[24] = v;	\
-	asm("movl %%fs,%0" : "=r" (v)); (pr_reg)[25] = v;	\
-	asm("movl %%gs,%0" : "=r" (v)); (pr_reg)[26] = v;	\
-} while (0);
-
-/* I'm not sure if we can use '-' here */
-#define ELF_PLATFORM       ("x86_64")
-extern void set_personality_64bit(void);
-extern unsigned int sysctl_vsyscall32;
-extern int force_personality32;
-
-#endif /* !CONFIG_X86_32 */
-
-#define CORE_DUMP_USE_REGSET
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE	4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE		(TASK_SIZE / 3 * 2)
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this CPU supports.  This could be done in user space,
-   but it's not easy, and we've already done it here.  */
-
-#define ELF_HWCAP		(boot_cpu_data.x86_capability[0])
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.
-
-   For the moment, we have only optimizations for the Intel generations,
-   but that could change... */
-
-#define SET_PERSONALITY(ex) set_personality_64bit()
-
-/*
- * An executable for which elf_read_implies_exec() returns TRUE will
- * have the READ_IMPLIES_EXEC personality flag set automatically.
- */
-#define elf_read_implies_exec(ex, executable_stack)	\
-	(executable_stack != EXSTACK_DISABLE_X)
-
-struct task_struct;
-
-#define	ARCH_DLINFO_IA32(vdso_enabled)					\
-do {									\
-	if (vdso_enabled) {						\
-		NEW_AUX_ENT(AT_SYSINFO,	VDSO_ENTRY);			\
-		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_CURRENT_BASE);	\
-	}								\
-} while (0)
-
-#ifdef CONFIG_X86_32
-
-#define VDSO_HIGH_BASE		(__fix_to_virt(FIX_VDSO))
-
-#define ARCH_DLINFO		ARCH_DLINFO_IA32(vdso_enabled)
-
-/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
-
-#else /* CONFIG_X86_32 */
-
-#define VDSO_HIGH_BASE		0xffffe000U /* CONFIG_COMPAT_VDSO address */
-
-/* 1GB for 64bit, 8MB for 32bit */
-#define STACK_RND_MASK (test_thread_flag(TIF_IA32) ? 0x7ff : 0x3fffff)
-
-#define ARCH_DLINFO							\
-do {									\
-	if (vdso_enabled)						\
-		NEW_AUX_ENT(AT_SYSINFO_EHDR,				\
-			    (unsigned long)current->mm->context.vdso);	\
-} while (0)
-
-#define AT_SYSINFO		32
-
-#define COMPAT_ARCH_DLINFO	ARCH_DLINFO_IA32(sysctl_vsyscall32)
-
-#define COMPAT_ELF_ET_DYN_BASE	(TASK_UNMAPPED_BASE + 0x1000000)
-
-#endif /* !CONFIG_X86_32 */
-
-#define VDSO_CURRENT_BASE	((unsigned long)current->mm->context.vdso)
-
-#define VDSO_ENTRY							\
-	((unsigned long)VDSO32_SYMBOL(VDSO_CURRENT_BASE, vsyscall))
-
-struct linux_binprm;
-
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
-extern int arch_setup_additional_pages(struct linux_binprm *bprm,
-				       int executable_stack);
-
-extern int syscall32_setup_pages(struct linux_binprm *, int exstack);
-#define compat_arch_setup_additional_pages	syscall32_setup_pages
-
-extern unsigned long arch_randomize_brk(struct mm_struct *mm);
-#define arch_randomize_brk arch_randomize_brk
-
-#endif /* ASM_X86__ELF_H */
diff --git a/include/asm-x86/emergency-restart.h b/include/asm-x86/emergency-restart.h
deleted file mode 100644
index 190d0d8..0000000
--- a/include/asm-x86/emergency-restart.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef ASM_X86__EMERGENCY_RESTART_H
-#define ASM_X86__EMERGENCY_RESTART_H
-
-enum reboot_type {
-	BOOT_TRIPLE = 't',
-	BOOT_KBD = 'k',
-#ifdef CONFIG_X86_32
-	BOOT_BIOS = 'b',
-#endif
-	BOOT_ACPI = 'a',
-	BOOT_EFI = 'e'
-};
-
-extern enum reboot_type reboot_type;
-
-extern void machine_emergency_restart(void);
-
-#endif /* ASM_X86__EMERGENCY_RESTART_H */
diff --git a/include/asm-x86/fb.h b/include/asm-x86/fb.h
deleted file mode 100644
index aca38dbd..0000000
--- a/include/asm-x86/fb.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef ASM_X86__FB_H
-#define ASM_X86__FB_H
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
-				unsigned long off)
-{
-	if (boot_cpu_data.x86 > 3)
-		pgprot_val(vma->vm_page_prot) |= _PAGE_PCD;
-}
-
-#ifdef CONFIG_X86_32
-extern int fb_is_primary_device(struct fb_info *info);
-#else
-static inline int fb_is_primary_device(struct fb_info *info) { return 0; }
-#endif
-
-#endif /* ASM_X86__FB_H */
diff --git a/include/asm-x86/fixmap.h b/include/asm-x86/fixmap.h
deleted file mode 100644
index 78e33a1..0000000
--- a/include/asm-x86/fixmap.h
+++ /dev/null
@@ -1,68 +0,0 @@
-#ifndef ASM_X86__FIXMAP_H
-#define ASM_X86__FIXMAP_H
-
-#ifdef CONFIG_X86_32
-# include "fixmap_32.h"
-#else
-# include "fixmap_64.h"
-#endif
-
-extern int fixmaps_set;
-
-void __native_set_fixmap(enum fixed_addresses idx, pte_t pte);
-void native_set_fixmap(enum fixed_addresses idx,
-		       unsigned long phys, pgprot_t flags);
-
-#ifndef CONFIG_PARAVIRT
-static inline void __set_fixmap(enum fixed_addresses idx,
-				unsigned long phys, pgprot_t flags)
-{
-	native_set_fixmap(idx, phys, flags);
-}
-#endif
-
-#define set_fixmap(idx, phys)				\
-	__set_fixmap(idx, phys, PAGE_KERNEL)
-
-/*
- * Some hardware wants to get fixmapped without caching.
- */
-#define set_fixmap_nocache(idx, phys)			\
-	__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
-
-#define clear_fixmap(idx)			\
-	__set_fixmap(idx, 0, __pgprot(0))
-
-#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
-#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
-
-extern void __this_fixmap_does_not_exist(void);
-
-/*
- * 'index to address' translation. If anyone tries to use the idx
- * directly without translation, we catch the bug with a NULL-deference
- * kernel oops. Illegal ranges of incoming indices are caught too.
- */
-static __always_inline unsigned long fix_to_virt(const unsigned int idx)
-{
-	/*
-	 * this branch gets completely eliminated after inlining,
-	 * except when someone tries to use fixaddr indices in an
-	 * illegal way. (such as mixing up address types or using
-	 * out-of-range indices).
-	 *
-	 * If it doesn't get removed, the linker will complain
-	 * loudly with a reasonably clear error message..
-	 */
-	if (idx >= __end_of_fixed_addresses)
-		__this_fixmap_does_not_exist();
-
-	return __fix_to_virt(idx);
-}
-
-static inline unsigned long virt_to_fix(const unsigned long vaddr)
-{
-	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
-	return __virt_to_fix(vaddr);
-}
-#endif /* ASM_X86__FIXMAP_H */
diff --git a/include/asm-x86/fixmap_32.h b/include/asm-x86/fixmap_32.h
deleted file mode 100644
index 8844002..0000000
--- a/include/asm-x86/fixmap_32.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * fixmap.h: compile-time virtual memory allocation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998 Ingo Molnar
- *
- * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
- */
-
-#ifndef ASM_X86__FIXMAP_32_H
-#define ASM_X86__FIXMAP_32_H
-
-
-/* used by vmalloc.c, vsyscall.lds.S.
- *
- * Leave one empty page between vmalloc'ed areas and
- * the start of the fixmap.
- */
-extern unsigned long __FIXADDR_TOP;
-#define FIXADDR_USER_START     __fix_to_virt(FIX_VDSO)
-#define FIXADDR_USER_END       __fix_to_virt(FIX_VDSO - 1)
-
-#ifndef __ASSEMBLY__
-#include <linux/kernel.h>
-#include <asm/acpi.h>
-#include <asm/apicdef.h>
-#include <asm/page.h>
-#ifdef CONFIG_HIGHMEM
-#include <linux/threads.h>
-#include <asm/kmap_types.h>
-#endif
-
-/*
- * Here we define all the compile-time 'special' virtual
- * addresses. The point is to have a constant address at
- * compile time, but to set the physical address only
- * in the boot process. We allocate these special addresses
- * from the end of virtual memory (0xfffff000) backwards.
- * Also this lets us do fail-safe vmalloc(), we
- * can guarantee that these special addresses and
- * vmalloc()-ed addresses never overlap.
- *
- * these 'compile-time allocated' memory buffers are
- * fixed-size 4k pages. (or larger if used with an increment
- * highger than 1) use fixmap_set(idx,phys) to associate
- * physical memory with fixmap indices.
- *
- * TLB entries of such buffers will not be flushed across
- * task switches.
- */
-enum fixed_addresses {
-	FIX_HOLE,
-	FIX_VDSO,
-	FIX_DBGP_BASE,
-	FIX_EARLYCON_MEM_BASE,
-#ifdef CONFIG_X86_LOCAL_APIC
-	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
-#endif
-#ifdef CONFIG_X86_IO_APIC
-	FIX_IO_APIC_BASE_0,
-	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS-1,
-#endif
-#ifdef CONFIG_X86_VISWS_APIC
-	FIX_CO_CPU,	/* Cobalt timer */
-	FIX_CO_APIC,	/* Cobalt APIC Redirection Table */
-	FIX_LI_PCIA,	/* Lithium PCI Bridge A */
-	FIX_LI_PCIB,	/* Lithium PCI Bridge B */
-#endif
-#ifdef CONFIG_X86_F00F_BUG
-	FIX_F00F_IDT,	/* Virtual mapping for IDT */
-#endif
-#ifdef CONFIG_X86_CYCLONE_TIMER
-	FIX_CYCLONE_TIMER, /*cyclone timer register*/
-#endif
-#ifdef CONFIG_HIGHMEM
-	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
-	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
-#endif
-#ifdef CONFIG_PCI_MMCONFIG
-	FIX_PCIE_MCFG,
-#endif
-#ifdef CONFIG_PARAVIRT
-	FIX_PARAVIRT_BOOTMAP,
-#endif
-	__end_of_permanent_fixed_addresses,
-	/*
-	 * 256 temporary boot-time mappings, used by early_ioremap(),
-	 * before ioremap() is functional.
-	 *
-	 * We round it up to the next 256 pages boundary so that we
-	 * can have a single pgd entry and a single pte table:
-	 */
-#define NR_FIX_BTMAPS		64
-#define FIX_BTMAPS_SLOTS	4
-	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
-			(__end_of_permanent_fixed_addresses & 255),
-	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
-	FIX_WP_TEST,
-#ifdef CONFIG_ACPI
-	FIX_ACPI_BEGIN,
-	FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
-#endif
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
-	FIX_OHCI1394_BASE,
-#endif
-	__end_of_fixed_addresses
-};
-
-extern void reserve_top_address(unsigned long reserve);
-
-
-#define FIXADDR_TOP	((unsigned long)__FIXADDR_TOP)
-
-#define __FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
-#define __FIXADDR_BOOT_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
-#define FIXADDR_START		(FIXADDR_TOP - __FIXADDR_SIZE)
-#define FIXADDR_BOOT_START	(FIXADDR_TOP - __FIXADDR_BOOT_SIZE)
-
-#endif /* !__ASSEMBLY__ */
-#endif /* ASM_X86__FIXMAP_32_H */
diff --git a/include/asm-x86/fixmap_64.h b/include/asm-x86/fixmap_64.h
deleted file mode 100644
index dab4751..0000000
--- a/include/asm-x86/fixmap_64.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * fixmap.h: compile-time virtual memory allocation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998 Ingo Molnar
- */
-
-#ifndef ASM_X86__FIXMAP_64_H
-#define ASM_X86__FIXMAP_64_H
-
-#include <linux/kernel.h>
-#include <asm/acpi.h>
-#include <asm/apicdef.h>
-#include <asm/page.h>
-#include <asm/vsyscall.h>
-#include <asm/efi.h>
-
-/*
- * Here we define all the compile-time 'special' virtual
- * addresses. The point is to have a constant address at
- * compile time, but to set the physical address only
- * in the boot process.
- *
- * These 'compile-time allocated' memory buffers are
- * fixed-size 4k pages (or larger if used with an increment
- * higher than 1). Use set_fixmap(idx,phys) to associate
- * physical memory with fixmap indices.
- *
- * TLB entries of such buffers will not be flushed across
- * task switches.
- */
-
-enum fixed_addresses {
-	VSYSCALL_LAST_PAGE,
-	VSYSCALL_FIRST_PAGE = VSYSCALL_LAST_PAGE
-			    + ((VSYSCALL_END-VSYSCALL_START) >> PAGE_SHIFT) - 1,
-	VSYSCALL_HPET,
-	FIX_DBGP_BASE,
-	FIX_EARLYCON_MEM_BASE,
-	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
-	FIX_IO_APIC_BASE_0,
-	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
-	FIX_EFI_IO_MAP_LAST_PAGE,
-	FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
-				  + MAX_EFI_IO_PAGES - 1,
-#ifdef CONFIG_PARAVIRT
-	FIX_PARAVIRT_BOOTMAP,
-#endif
-	__end_of_permanent_fixed_addresses,
-#ifdef CONFIG_ACPI
-	FIX_ACPI_BEGIN,
-	FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
-#endif
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
-	FIX_OHCI1394_BASE,
-#endif
-	/*
-	 * 256 temporary boot-time mappings, used by early_ioremap(),
-	 * before ioremap() is functional.
-	 *
-	 * We round it up to the next 256 pages boundary so that we
-	 * can have a single pgd entry and a single pte table:
-	 */
-#define NR_FIX_BTMAPS		64
-#define FIX_BTMAPS_SLOTS	4
-	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
-			(__end_of_permanent_fixed_addresses & 255),
-	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
-	__end_of_fixed_addresses
-};
-
-#define FIXADDR_TOP	(VSYSCALL_END-PAGE_SIZE)
-#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
-#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
-
-/* Only covers 32bit vsyscalls currently. Need another set for 64bit. */
-#define FIXADDR_USER_START	((unsigned long)VSYSCALL32_VSYSCALL)
-#define FIXADDR_USER_END	(FIXADDR_USER_START + PAGE_SIZE)
-
-#endif /* ASM_X86__FIXMAP_64_H */
diff --git a/include/asm-x86/floppy.h b/include/asm-x86/floppy.h
deleted file mode 100644
index 7d83a3a..0000000
--- a/include/asm-x86/floppy.h
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * Architecture specific parts of the Floppy driver
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995
- */
-#ifndef ASM_X86__FLOPPY_H
-#define ASM_X86__FLOPPY_H
-
-#include <linux/vmalloc.h>
-
-/*
- * The DMA channel used by the floppy controller cannot access data at
- * addresses >= 16MB
- *
- * Went back to the 1MB limit, as some people had problems with the floppy
- * driver otherwise. It doesn't matter much for performance anyway, as most
- * floppy accesses go through the track buffer.
- */
-#define _CROSS_64KB(a, s, vdma)						\
-	(!(vdma) &&							\
-	 ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
-
-#define CROSS_64KB(a, s) _CROSS_64KB(a, s, use_virtual_dma & 1)
-
-
-#define SW fd_routine[use_virtual_dma & 1]
-#define CSW fd_routine[can_use_virtual_dma & 1]
-
-
-#define fd_inb(port)		inb_p(port)
-#define fd_outb(value, port)	outb_p(value, port)
-
-#define fd_request_dma()	CSW._request_dma(FLOPPY_DMA, "floppy")
-#define fd_free_dma()		CSW._free_dma(FLOPPY_DMA)
-#define fd_enable_irq()		enable_irq(FLOPPY_IRQ)
-#define fd_disable_irq()	disable_irq(FLOPPY_IRQ)
-#define fd_free_irq()		free_irq(FLOPPY_IRQ, NULL)
-#define fd_get_dma_residue()	SW._get_dma_residue(FLOPPY_DMA)
-#define fd_dma_mem_alloc(size)	SW._dma_mem_alloc(size)
-#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io)
-
-#define FLOPPY_CAN_FALLBACK_ON_NODMA
-
-static int virtual_dma_count;
-static int virtual_dma_residue;
-static char *virtual_dma_addr;
-static int virtual_dma_mode;
-static int doing_pdma;
-
-static irqreturn_t floppy_hardint(int irq, void *dev_id)
-{
-	unsigned char st;
-
-#undef TRACE_FLPY_INT
-
-#ifdef TRACE_FLPY_INT
-	static int calls;
-	static int bytes;
-	static int dma_wait;
-#endif
-	if (!doing_pdma)
-		return floppy_interrupt(irq, dev_id);
-
-#ifdef TRACE_FLPY_INT
-	if (!calls)
-		bytes = virtual_dma_count;
-#endif
-
-	{
-		int lcount;
-		char *lptr;
-
-		st = 1;
-		for (lcount = virtual_dma_count, lptr = virtual_dma_addr;
-		     lcount; lcount--, lptr++) {
-			st = inb(virtual_dma_port + 4) & 0xa0;
-			if (st != 0xa0)
-				break;
-			if (virtual_dma_mode)
-				outb_p(*lptr, virtual_dma_port + 5);
-			else
-				*lptr = inb_p(virtual_dma_port + 5);
-		}
-		virtual_dma_count = lcount;
-		virtual_dma_addr = lptr;
-		st = inb(virtual_dma_port + 4);
-	}
-
-#ifdef TRACE_FLPY_INT
-	calls++;
-#endif
-	if (st == 0x20)
-		return IRQ_HANDLED;
-	if (!(st & 0x20)) {
-		virtual_dma_residue += virtual_dma_count;
-		virtual_dma_count = 0;
-#ifdef TRACE_FLPY_INT
-		printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
-		       virtual_dma_count, virtual_dma_residue, calls, bytes,
-		       dma_wait);
-		calls = 0;
-		dma_wait = 0;
-#endif
-		doing_pdma = 0;
-		floppy_interrupt(irq, dev_id);
-		return IRQ_HANDLED;
-	}
-#ifdef TRACE_FLPY_INT
-	if (!virtual_dma_count)
-		dma_wait++;
-#endif
-	return IRQ_HANDLED;
-}
-
-static void fd_disable_dma(void)
-{
-	if (!(can_use_virtual_dma & 1))
-		disable_dma(FLOPPY_DMA);
-	doing_pdma = 0;
-	virtual_dma_residue += virtual_dma_count;
-	virtual_dma_count = 0;
-}
-
-static int vdma_request_dma(unsigned int dmanr, const char *device_id)
-{
-	return 0;
-}
-
-static void vdma_nop(unsigned int dummy)
-{
-}
-
-
-static int vdma_get_dma_residue(unsigned int dummy)
-{
-	return virtual_dma_count + virtual_dma_residue;
-}
-
-
-static int fd_request_irq(void)
-{
-	if (can_use_virtual_dma)
-		return request_irq(FLOPPY_IRQ, floppy_hardint,
-				   IRQF_DISABLED, "floppy", NULL);
-	else
-		return request_irq(FLOPPY_IRQ, floppy_interrupt,
-				   IRQF_DISABLED, "floppy", NULL);
-}
-
-static unsigned long dma_mem_alloc(unsigned long size)
-{
-	return __get_dma_pages(GFP_KERNEL|__GFP_NORETRY, get_order(size));
-}
-
-
-static unsigned long vdma_mem_alloc(unsigned long size)
-{
-	return (unsigned long)vmalloc(size);
-
-}
-
-#define nodma_mem_alloc(size) vdma_mem_alloc(size)
-
-static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
-{
-	if ((unsigned long)addr >= (unsigned long)high_memory)
-		vfree((void *)addr);
-	else
-		free_pages(addr, get_order(size));
-}
-
-#define fd_dma_mem_free(addr, size)  _fd_dma_mem_free(addr, size)
-
-static void _fd_chose_dma_mode(char *addr, unsigned long size)
-{
-	if (can_use_virtual_dma == 2) {
-		if ((unsigned long)addr >= (unsigned long)high_memory ||
-		    isa_virt_to_bus(addr) >= 0x1000000 ||
-		    _CROSS_64KB(addr, size, 0))
-			use_virtual_dma = 1;
-		else
-			use_virtual_dma = 0;
-	} else {
-		use_virtual_dma = can_use_virtual_dma & 1;
-	}
-}
-
-#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size)
-
-
-static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
-	doing_pdma = 1;
-	virtual_dma_port = io;
-	virtual_dma_mode = (mode == DMA_MODE_WRITE);
-	virtual_dma_addr = addr;
-	virtual_dma_count = size;
-	virtual_dma_residue = 0;
-	return 0;
-}
-
-static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
-#ifdef FLOPPY_SANITY_CHECK
-	if (CROSS_64KB(addr, size)) {
-		printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
-		return -1;
-	}
-#endif
-	/* actual, physical DMA */
-	doing_pdma = 0;
-	clear_dma_ff(FLOPPY_DMA);
-	set_dma_mode(FLOPPY_DMA, mode);
-	set_dma_addr(FLOPPY_DMA, isa_virt_to_bus(addr));
-	set_dma_count(FLOPPY_DMA, size);
-	enable_dma(FLOPPY_DMA);
-	return 0;
-}
-
-static struct fd_routine_l {
-	int (*_request_dma)(unsigned int dmanr, const char *device_id);
-	void (*_free_dma)(unsigned int dmanr);
-	int (*_get_dma_residue)(unsigned int dummy);
-	unsigned long (*_dma_mem_alloc)(unsigned long size);
-	int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
-} fd_routine[] = {
-	{
-		request_dma,
-		free_dma,
-		get_dma_residue,
-		dma_mem_alloc,
-		hard_dma_setup
-	},
-	{
-		vdma_request_dma,
-		vdma_nop,
-		vdma_get_dma_residue,
-		vdma_mem_alloc,
-		vdma_dma_setup
-	}
-};
-
-
-static int FDC1 = 0x3f0;
-static int FDC2 = -1;
-
-/*
- * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock
- * is needed to prevent corrupted CMOS RAM in case "insmod floppy"
- * coincides with another rtc CMOS user.		Paul G.
- */
-#define FLOPPY0_TYPE					\
-({							\
-	unsigned long flags;				\
-	unsigned char val;				\
-	spin_lock_irqsave(&rtc_lock, flags);		\
-	val = (CMOS_READ(0x10) >> 4) & 15;		\
-	spin_unlock_irqrestore(&rtc_lock, flags);	\
-	val;						\
-})
-
-#define FLOPPY1_TYPE					\
-({							\
-	unsigned long flags;				\
-	unsigned char val;				\
-	spin_lock_irqsave(&rtc_lock, flags);		\
-	val = CMOS_READ(0x10) & 15;			\
-	spin_unlock_irqrestore(&rtc_lock, flags);	\
-	val;						\
-})
-
-#define N_FDC 2
-#define N_DRIVE 8
-
-#define EXTRA_FLOPPY_PARAMS
-
-#endif /* ASM_X86__FLOPPY_H */
diff --git a/include/asm-x86/ftrace.h b/include/asm-x86/ftrace.h
deleted file mode 100644
index 1bb6f9bb..0000000
--- a/include/asm-x86/ftrace.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef ASM_X86__FTRACE_H
-#define ASM_X86__FTRACE_H
-
-#ifdef CONFIG_FTRACE
-#define MCOUNT_ADDR		((long)(mcount))
-#define MCOUNT_INSN_SIZE	5 /* sizeof mcount call */
-
-#ifndef __ASSEMBLY__
-extern void mcount(void);
-
-static inline unsigned long ftrace_call_adjust(unsigned long addr)
-{
-	/*
-	 * call mcount is "e8 <4 byte offset>"
-	 * The addr points to the 4 byte offset and the caller of this
-	 * function wants the pointer to e8. Simply subtract one.
-	 */
-	return addr - 1;
-}
-#endif
-
-#endif /* CONFIG_FTRACE */
-
-#endif /* ASM_X86__FTRACE_H */
diff --git a/include/asm-x86/futex.h b/include/asm-x86/futex.h
deleted file mode 100644
index 06b924e..0000000
--- a/include/asm-x86/futex.h
+++ /dev/null
@@ -1,140 +0,0 @@
-#ifndef ASM_X86__FUTEX_H
-#define ASM_X86__FUTEX_H
-
-#ifdef __KERNEL__
-
-#include <linux/futex.h>
-#include <linux/uaccess.h>
-
-#include <asm/asm.h>
-#include <asm/errno.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-
-#define __futex_atomic_op1(insn, ret, oldval, uaddr, oparg)	\
-	asm volatile("1:\t" insn "\n"				\
-		     "2:\t.section .fixup,\"ax\"\n"		\
-		     "3:\tmov\t%3, %1\n"			\
-		     "\tjmp\t2b\n"				\
-		     "\t.previous\n"				\
-		     _ASM_EXTABLE(1b, 3b)			\
-		     : "=r" (oldval), "=r" (ret), "+m" (*uaddr)	\
-		     : "i" (-EFAULT), "0" (oparg), "1" (0))
-
-#define __futex_atomic_op2(insn, ret, oldval, uaddr, oparg)	\
-	asm volatile("1:\tmovl	%2, %0\n"			\
-		     "\tmovl\t%0, %3\n"				\
-		     "\t" insn "\n"				\
-		     "2:\t" LOCK_PREFIX "cmpxchgl %3, %2\n"	\
-		     "\tjnz\t1b\n"				\
-		     "3:\t.section .fixup,\"ax\"\n"		\
-		     "4:\tmov\t%5, %1\n"			\
-		     "\tjmp\t3b\n"				\
-		     "\t.previous\n"				\
-		     _ASM_EXTABLE(1b, 4b)			\
-		     _ASM_EXTABLE(2b, 4b)			\
-		     : "=&a" (oldval), "=&r" (ret),		\
-		       "+m" (*uaddr), "=&r" (tem)		\
-		     : "r" (oparg), "i" (-EFAULT), "1" (0))
-
-static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
-{
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
-	int oldval = 0, ret, tem;
-
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
-
-#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_BSWAP)
-	/* Real i386 machines can only support FUTEX_OP_SET */
-	if (op != FUTEX_OP_SET && boot_cpu_data.x86 == 3)
-		return -ENOSYS;
-#endif
-
-	pagefault_disable();
-
-	switch (op) {
-	case FUTEX_OP_SET:
-		__futex_atomic_op1("xchgl %0, %2", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ADD:
-		__futex_atomic_op1(LOCK_PREFIX "xaddl %0, %2", ret, oldval,
-				   uaddr, oparg);
-		break;
-	case FUTEX_OP_OR:
-		__futex_atomic_op2("orl %4, %3", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ANDN:
-		__futex_atomic_op2("andl %4, %3", ret, oldval, uaddr, ~oparg);
-		break;
-	case FUTEX_OP_XOR:
-		__futex_atomic_op2("xorl %4, %3", ret, oldval, uaddr, oparg);
-		break;
-	default:
-		ret = -ENOSYS;
-	}
-
-	pagefault_enable();
-
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ:
-			ret = (oldval == cmparg);
-			break;
-		case FUTEX_OP_CMP_NE:
-			ret = (oldval != cmparg);
-			break;
-		case FUTEX_OP_CMP_LT:
-			ret = (oldval < cmparg);
-			break;
-		case FUTEX_OP_CMP_GE:
-			ret = (oldval >= cmparg);
-			break;
-		case FUTEX_OP_CMP_LE:
-			ret = (oldval <= cmparg);
-			break;
-		case FUTEX_OP_CMP_GT:
-			ret = (oldval > cmparg);
-			break;
-		default:
-			ret = -ENOSYS;
-		}
-	}
-	return ret;
-}
-
-static inline int futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval,
-						int newval)
-{
-
-#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_BSWAP)
-	/* Real i386 machines have no cmpxchg instruction */
-	if (boot_cpu_data.x86 == 3)
-		return -ENOSYS;
-#endif
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
-
-	asm volatile("1:\t" LOCK_PREFIX "cmpxchgl %3, %1\n"
-		     "2:\t.section .fixup, \"ax\"\n"
-		     "3:\tmov     %2, %0\n"
-		     "\tjmp     2b\n"
-		     "\t.previous\n"
-		     _ASM_EXTABLE(1b, 3b)
-		     : "=a" (oldval), "+m" (*uaddr)
-		     : "i" (-EFAULT), "r" (newval), "0" (oldval)
-		     : "memory"
-	);
-
-	return oldval;
-}
-
-#endif
-#endif /* ASM_X86__FUTEX_H */
diff --git a/include/asm-x86/gart.h b/include/asm-x86/gart.h
deleted file mode 100644
index 605edb3..0000000
--- a/include/asm-x86/gart.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef ASM_X86__GART_H
-#define ASM_X86__GART_H
-
-#include <asm/e820.h>
-
-extern void set_up_gart_resume(u32, u32);
-
-extern int fallback_aper_order;
-extern int fallback_aper_force;
-extern int fix_aperture;
-
-/* PTE bits. */
-#define GPTE_VALID	1
-#define GPTE_COHERENT	2
-
-/* Aperture control register bits. */
-#define GARTEN		(1<<0)
-#define DISGARTCPU	(1<<4)
-#define DISGARTIO	(1<<5)
-
-/* GART cache control register bits. */
-#define INVGART		(1<<0)
-#define GARTPTEERR	(1<<1)
-
-/* K8 On-cpu GART registers */
-#define AMD64_GARTAPERTURECTL	0x90
-#define AMD64_GARTAPERTUREBASE	0x94
-#define AMD64_GARTTABLEBASE	0x98
-#define AMD64_GARTCACHECTL	0x9c
-#define AMD64_GARTEN		(1<<0)
-
-extern int agp_amd64_init(void);
-
-static inline void enable_gart_translation(struct pci_dev *dev, u64 addr)
-{
-	u32 tmp, ctl;
-
-        /* address of the mappings table */
-        addr >>= 12;
-        tmp = (u32) addr<<4;
-        tmp &= ~0xf;
-        pci_write_config_dword(dev, AMD64_GARTTABLEBASE, tmp);
-
-        /* Enable GART translation for this hammer. */
-        pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl);
-        ctl |= GARTEN;
-        ctl &= ~(DISGARTCPU | DISGARTIO);
-        pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
-}
-
-static inline int aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)
-{
-	if (!aper_base)
-		return 0;
-
-	if (aper_base + aper_size > 0x100000000ULL) {
-		printk(KERN_INFO "Aperture beyond 4GB. Ignoring.\n");
-		return 0;
-	}
-	if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
-		printk(KERN_INFO "Aperture pointing to e820 RAM. Ignoring.\n");
-		return 0;
-	}
-	if (aper_size < min_size) {
-		printk(KERN_INFO "Aperture too small (%d MB) than (%d MB)\n",
-				 aper_size>>20, min_size>>20);
-		return 0;
-	}
-
-	return 1;
-}
-
-#endif /* ASM_X86__GART_H */
diff --git a/include/asm-x86/genapic_32.h b/include/asm-x86/genapic_32.h
deleted file mode 100644
index 6fe4f81..0000000
--- a/include/asm-x86/genapic_32.h
+++ /dev/null
@@ -1,126 +0,0 @@
-#ifndef ASM_X86__GENAPIC_32_H
-#define ASM_X86__GENAPIC_32_H
-
-#include <asm/mpspec.h>
-
-/*
- * Generic APIC driver interface.
- *
- * An straight forward mapping of the APIC related parts of the
- * x86 subarchitecture interface to a dynamic object.
- *
- * This is used by the "generic" x86 subarchitecture.
- *
- * Copyright 2003 Andi Kleen, SuSE Labs.
- */
-
-struct mpc_config_bus;
-struct mp_config_table;
-struct mpc_config_processor;
-
-struct genapic {
-	char *name;
-	int (*probe)(void);
-
-	int (*apic_id_registered)(void);
-	cpumask_t (*target_cpus)(void);
-	int int_delivery_mode;
-	int int_dest_mode;
-	int ESR_DISABLE;
-	int apic_destination_logical;
-	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
-	unsigned long (*check_apicid_present)(int apicid);
-	int no_balance_irq;
-	int no_ioapic_check;
-	void (*init_apic_ldr)(void);
-	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
-
-	void (*setup_apic_routing)(void);
-	int (*multi_timer_check)(int apic, int irq);
-	int (*apicid_to_node)(int logical_apicid);
-	int (*cpu_to_logical_apicid)(int cpu);
-	int (*cpu_present_to_apicid)(int mps_cpu);
-	physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
-	void (*setup_portio_remap)(void);
-	int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
-	void (*enable_apic_mode)(void);
-	u32 (*phys_pkg_id)(u32 cpuid_apic, int index_msb);
-
-	/* mpparse */
-	/* When one of the next two hooks returns 1 the genapic
-	   is switched to this. Essentially they are additional probe
-	   functions. */
-	int (*mps_oem_check)(struct mp_config_table *mpc, char *oem,
-			     char *productid);
-	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
-
-	unsigned (*get_apic_id)(unsigned long x);
-	unsigned long apic_id_mask;
-	unsigned int (*cpu_mask_to_apicid)(cpumask_t cpumask);
-	cpumask_t (*vector_allocation_domain)(int cpu);
-
-#ifdef CONFIG_SMP
-	/* ipi */
-	void (*send_IPI_mask)(cpumask_t mask, int vector);
-	void (*send_IPI_allbutself)(int vector);
-	void (*send_IPI_all)(int vector);
-#endif
-};
-
-#define APICFUNC(x) .x = x,
-
-/* More functions could be probably marked IPIFUNC and save some space
-   in UP GENERICARCH kernels, but I don't have the nerve right now
-   to untangle this mess. -AK  */
-#ifdef CONFIG_SMP
-#define IPIFUNC(x) APICFUNC(x)
-#else
-#define IPIFUNC(x)
-#endif
-
-#define APIC_INIT(aname, aprobe)			\
-{							\
-	.name = aname,					\
-	.probe = aprobe,				\
-	.int_delivery_mode = INT_DELIVERY_MODE,		\
-	.int_dest_mode = INT_DEST_MODE,			\
-	.no_balance_irq = NO_BALANCE_IRQ,		\
-	.ESR_DISABLE = esr_disable,			\
-	.apic_destination_logical = APIC_DEST_LOGICAL,	\
-	APICFUNC(apic_id_registered)			\
-	APICFUNC(target_cpus)				\
-	APICFUNC(check_apicid_used)			\
-	APICFUNC(check_apicid_present)			\
-	APICFUNC(init_apic_ldr)				\
-	APICFUNC(ioapic_phys_id_map)			\
-	APICFUNC(setup_apic_routing)			\
-	APICFUNC(multi_timer_check)			\
-	APICFUNC(apicid_to_node)			\
-	APICFUNC(cpu_to_logical_apicid)			\
-	APICFUNC(cpu_present_to_apicid)			\
-	APICFUNC(apicid_to_cpu_present)			\
-	APICFUNC(setup_portio_remap)			\
-	APICFUNC(check_phys_apicid_present)		\
-	APICFUNC(mps_oem_check)				\
-	APICFUNC(get_apic_id)				\
-	.apic_id_mask = APIC_ID_MASK,			\
-	APICFUNC(cpu_mask_to_apicid)			\
-	APICFUNC(vector_allocation_domain)			\
-	APICFUNC(acpi_madt_oem_check)			\
-	IPIFUNC(send_IPI_mask)				\
-	IPIFUNC(send_IPI_allbutself)			\
-	IPIFUNC(send_IPI_all)				\
-	APICFUNC(enable_apic_mode)			\
-	APICFUNC(phys_pkg_id)				\
-}
-
-extern struct genapic *genapic;
-
-enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
-#define get_uv_system_type()		UV_NONE
-#define is_uv_system()			0
-#define uv_wakeup_secondary(a, b)	1
-#define uv_system_init()		do {} while (0)
-
-
-#endif /* ASM_X86__GENAPIC_32_H */
diff --git a/include/asm-x86/genapic_64.h b/include/asm-x86/genapic_64.h
deleted file mode 100644
index ed6a4886..0000000
--- a/include/asm-x86/genapic_64.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef ASM_X86__GENAPIC_64_H
-#define ASM_X86__GENAPIC_64_H
-
-/*
- * Copyright 2004 James Cleverdon, IBM.
- * Subject to the GNU Public License, v.2
- *
- * Generic APIC sub-arch data struct.
- *
- * Hacked for x86-64 by James Cleverdon from i386 architecture code by
- * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
- * James Cleverdon.
- */
-
-struct genapic {
-	char *name;
-	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
-	u32 int_delivery_mode;
-	u32 int_dest_mode;
-	int (*apic_id_registered)(void);
-	cpumask_t (*target_cpus)(void);
-	cpumask_t (*vector_allocation_domain)(int cpu);
-	void (*init_apic_ldr)(void);
-	/* ipi */
-	void (*send_IPI_mask)(cpumask_t mask, int vector);
-	void (*send_IPI_allbutself)(int vector);
-	void (*send_IPI_all)(int vector);
-	void (*send_IPI_self)(int vector);
-	/* */
-	unsigned int (*cpu_mask_to_apicid)(cpumask_t cpumask);
-	unsigned int (*phys_pkg_id)(int index_msb);
-	unsigned int (*get_apic_id)(unsigned long x);
-	unsigned long (*set_apic_id)(unsigned int id);
-	unsigned long apic_id_mask;
-};
-
-extern struct genapic *genapic;
-
-extern struct genapic apic_flat;
-extern struct genapic apic_physflat;
-extern struct genapic apic_x2apic_cluster;
-extern struct genapic apic_x2apic_phys;
-extern int acpi_madt_oem_check(char *, char *);
-
-extern void apic_send_IPI_self(int vector);
-enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
-extern enum uv_system_type get_uv_system_type(void);
-extern int is_uv_system(void);
-
-extern struct genapic apic_x2apic_uv_x;
-DECLARE_PER_CPU(int, x2apic_extra_bits);
-extern void uv_cpu_init(void);
-extern void uv_system_init(void);
-extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip);
-
-extern void setup_apic_routing(void);
-
-#endif /* ASM_X86__GENAPIC_64_H */
diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h
deleted file mode 100644
index 3f3444b..0000000
--- a/include/asm-x86/geode.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * AMD Geode definitions
- * Copyright (C) 2006, Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- */
-
-#ifndef ASM_X86__GEODE_H
-#define ASM_X86__GEODE_H
-
-#include <asm/processor.h>
-#include <linux/io.h>
-
-/* Generic southbridge functions */
-
-#define GEODE_DEV_PMS 0
-#define GEODE_DEV_ACPI 1
-#define GEODE_DEV_GPIO 2
-#define GEODE_DEV_MFGPT 3
-
-extern int geode_get_dev_base(unsigned int dev);
-
-/* Useful macros */
-#define geode_pms_base()	geode_get_dev_base(GEODE_DEV_PMS)
-#define geode_acpi_base()	geode_get_dev_base(GEODE_DEV_ACPI)
-#define geode_gpio_base()	geode_get_dev_base(GEODE_DEV_GPIO)
-#define geode_mfgpt_base()	geode_get_dev_base(GEODE_DEV_MFGPT)
-
-/* MSRS */
-
-#define MSR_GLIU_P2D_RO0	0x10000029
-
-#define MSR_LX_GLD_MSR_CONFIG	0x48002001
-#define MSR_LX_MSR_PADSEL	0x48002011	/* NOT 0x48000011; the data
-						 * sheet has the wrong value */
-#define MSR_GLCP_SYS_RSTPLL	0x4C000014
-#define MSR_GLCP_DOTPLL		0x4C000015
-
-#define MSR_LBAR_SMB		0x5140000B
-#define MSR_LBAR_GPIO		0x5140000C
-#define MSR_LBAR_MFGPT		0x5140000D
-#define MSR_LBAR_ACPI		0x5140000E
-#define MSR_LBAR_PMS		0x5140000F
-
-#define MSR_DIVIL_SOFT_RESET	0x51400017
-
-#define MSR_PIC_YSEL_LOW	0x51400020
-#define MSR_PIC_YSEL_HIGH	0x51400021
-#define MSR_PIC_ZSEL_LOW	0x51400022
-#define MSR_PIC_ZSEL_HIGH	0x51400023
-#define MSR_PIC_IRQM_LPC	0x51400025
-
-#define MSR_MFGPT_IRQ		0x51400028
-#define MSR_MFGPT_NR		0x51400029
-#define MSR_MFGPT_SETUP		0x5140002B
-
-#define MSR_LX_SPARE_MSR	0x80000011	/* DC-specific */
-
-#define MSR_GX_GLD_MSR_CONFIG	0xC0002001
-#define MSR_GX_MSR_PADSEL	0xC0002011
-
-/* Resource Sizes */
-
-#define LBAR_GPIO_SIZE		0xFF
-#define LBAR_MFGPT_SIZE		0x40
-#define LBAR_ACPI_SIZE		0x40
-#define LBAR_PMS_SIZE		0x80
-
-/* ACPI registers (PMS block) */
-
-/*
- * PM1_EN is only valid when VSA is enabled for 16 bit reads.
- * When VSA is not enabled, *always* read both PM1_STS and PM1_EN
- * with a 32 bit read at offset 0x0
- */
-
-#define PM1_STS			0x00
-#define PM1_EN			0x02
-#define PM1_CNT			0x08
-#define PM2_CNT			0x0C
-#define PM_TMR			0x10
-#define PM_GPE0_STS		0x18
-#define PM_GPE0_EN		0x1C
-
-/* PMC registers (PMS block) */
-
-#define PM_SSD			0x00
-#define PM_SCXA			0x04
-#define PM_SCYA			0x08
-#define PM_OUT_SLPCTL		0x0C
-#define PM_SCLK			0x10
-#define PM_SED			0x1
-#define PM_SCXD			0x18
-#define PM_SCYD			0x1C
-#define PM_IN_SLPCTL		0x20
-#define PM_WKD			0x30
-#define PM_WKXD			0x34
-#define PM_RD			0x38
-#define PM_WKXA			0x3C
-#define PM_FSD			0x40
-#define PM_TSD			0x44
-#define PM_PSD			0x48
-#define PM_NWKD			0x4C
-#define PM_AWKD			0x50
-#define PM_SSC			0x54
-
-/* VSA2 magic values */
-
-#define VSA_VRC_INDEX		0xAC1C
-#define VSA_VRC_DATA		0xAC1E
-#define VSA_VR_UNLOCK		0xFC53	/* unlock virtual register */
-#define VSA_VR_SIGNATURE	0x0003
-#define VSA_VR_MEM_SIZE		0x0200
-#define AMD_VSA_SIG		0x4132	/* signature is ascii 'VSA2' */
-#define GSW_VSA_SIG		0x534d  /* General Software signature */
-/* GPIO */
-
-#define GPIO_OUTPUT_VAL		0x00
-#define GPIO_OUTPUT_ENABLE	0x04
-#define GPIO_OUTPUT_OPEN_DRAIN	0x08
-#define GPIO_OUTPUT_INVERT	0x0C
-#define GPIO_OUTPUT_AUX1	0x10
-#define GPIO_OUTPUT_AUX2	0x14
-#define GPIO_PULL_UP		0x18
-#define GPIO_PULL_DOWN		0x1C
-#define GPIO_INPUT_ENABLE	0x20
-#define GPIO_INPUT_INVERT	0x24
-#define GPIO_INPUT_FILTER	0x28
-#define GPIO_INPUT_EVENT_COUNT	0x2C
-#define GPIO_READ_BACK		0x30
-#define GPIO_INPUT_AUX1		0x34
-#define GPIO_EVENTS_ENABLE	0x38
-#define GPIO_LOCK_ENABLE	0x3C
-#define GPIO_POSITIVE_EDGE_EN	0x40
-#define GPIO_NEGATIVE_EDGE_EN	0x44
-#define GPIO_POSITIVE_EDGE_STS	0x48
-#define GPIO_NEGATIVE_EDGE_STS	0x4C
-
-#define GPIO_MAP_X		0xE0
-#define GPIO_MAP_Y		0xE4
-#define GPIO_MAP_Z		0xE8
-#define GPIO_MAP_W		0xEC
-
-static inline u32 geode_gpio(unsigned int nr)
-{
-	BUG_ON(nr > 28);
-	return 1 << nr;
-}
-
-extern void geode_gpio_set(u32, unsigned int);
-extern void geode_gpio_clear(u32, unsigned int);
-extern int geode_gpio_isset(u32, unsigned int);
-extern void geode_gpio_setup_event(unsigned int, int, int);
-extern void geode_gpio_set_irq(unsigned int, unsigned int);
-
-static inline void geode_gpio_event_irq(unsigned int gpio, int pair)
-{
-	geode_gpio_setup_event(gpio, pair, 0);
-}
-
-static inline void geode_gpio_event_pme(unsigned int gpio, int pair)
-{
-	geode_gpio_setup_event(gpio, pair, 1);
-}
-
-/* Specific geode tests */
-
-static inline int is_geode_gx(void)
-{
-	return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
-		(boot_cpu_data.x86 == 5) &&
-		(boot_cpu_data.x86_model == 5));
-}
-
-static inline int is_geode_lx(void)
-{
-	return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
-		(boot_cpu_data.x86 == 5) &&
-		(boot_cpu_data.x86_model == 10));
-}
-
-static inline int is_geode(void)
-{
-	return (is_geode_gx() || is_geode_lx());
-}
-
-#ifdef CONFIG_MGEODE_LX
-extern int geode_has_vsa2(void);
-#else
-static inline int geode_has_vsa2(void)
-{
-	return 0;
-}
-#endif
-
-/* MFGPTs */
-
-#define MFGPT_MAX_TIMERS	8
-#define MFGPT_TIMER_ANY		(-1)
-
-#define MFGPT_DOMAIN_WORKING	1
-#define MFGPT_DOMAIN_STANDBY	2
-#define MFGPT_DOMAIN_ANY	(MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY)
-
-#define MFGPT_CMP1		0
-#define MFGPT_CMP2		1
-
-#define MFGPT_EVENT_IRQ		0
-#define MFGPT_EVENT_NMI		1
-#define MFGPT_EVENT_RESET	3
-
-#define MFGPT_REG_CMP1		0
-#define MFGPT_REG_CMP2		2
-#define MFGPT_REG_COUNTER	4
-#define MFGPT_REG_SETUP		6
-
-#define MFGPT_SETUP_CNTEN	(1 << 15)
-#define MFGPT_SETUP_CMP2	(1 << 14)
-#define MFGPT_SETUP_CMP1	(1 << 13)
-#define MFGPT_SETUP_SETUP	(1 << 12)
-#define MFGPT_SETUP_STOPEN	(1 << 11)
-#define MFGPT_SETUP_EXTEN	(1 << 10)
-#define MFGPT_SETUP_REVEN	(1 << 5)
-#define MFGPT_SETUP_CLKSEL	(1 << 4)
-
-static inline void geode_mfgpt_write(int timer, u16 reg, u16 value)
-{
-	u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
-	outw(value, base + reg + (timer * 8));
-}
-
-static inline u16 geode_mfgpt_read(int timer, u16 reg)
-{
-	u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
-	return inw(base + reg + (timer * 8));
-}
-
-extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
-extern int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable);
-extern int geode_mfgpt_alloc_timer(int timer, int domain);
-
-#define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1)
-#define geode_mfgpt_release_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 0)
-
-#ifdef CONFIG_GEODE_MFGPT_TIMER
-extern int __init mfgpt_timer_setup(void);
-#else
-static inline int mfgpt_timer_setup(void) { return 0; }
-#endif
-
-#endif /* ASM_X86__GEODE_H */
diff --git a/include/asm-x86/gpio.h b/include/asm-x86/gpio.h
deleted file mode 100644
index 497fb98..0000000
--- a/include/asm-x86/gpio.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Generic GPIO API implementation for x86.
- *
- * Derived from the generic GPIO API for powerpc:
- *
- * Copyright (c) 2007-2008  MontaVista Software, Inc.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef _ASM_I386_GPIO_H
-#define _ASM_I386_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-/*
- * Just call gpiolib.
- */
-static inline int gpio_get_value(unsigned int gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned int gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned int gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-/*
- * Not implemented, yet.
- */
-static inline int gpio_to_irq(unsigned int gpio)
-{
-	return -ENOSYS;
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return -EINVAL;
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* ASM_X86__GPIO_H */
diff --git a/include/asm-x86/hardirq_32.h b/include/asm-x86/hardirq_32.h
deleted file mode 100644
index 700fe23..0000000
--- a/include/asm-x86/hardirq_32.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef ASM_X86__HARDIRQ_32_H
-#define ASM_X86__HARDIRQ_32_H
-
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-	unsigned long idle_timestamp;
-	unsigned int __nmi_count;	/* arch dependent */
-	unsigned int apic_timer_irqs;	/* arch dependent */
-	unsigned int irq0_irqs;
-	unsigned int irq_resched_count;
-	unsigned int irq_call_count;
-	unsigned int irq_tlb_count;
-	unsigned int irq_thermal_count;
-	unsigned int irq_spurious_count;
-} ____cacheline_aligned irq_cpustat_t;
-
-DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
-
-#define __ARCH_IRQ_STAT
-#define __IRQ_STAT(cpu, member) (per_cpu(irq_stat, cpu).member)
-
-void ack_bad_irq(unsigned int irq);
-#include <linux/irq_cpustat.h>
-
-#endif /* ASM_X86__HARDIRQ_32_H */
diff --git a/include/asm-x86/hardirq_64.h b/include/asm-x86/hardirq_64.h
deleted file mode 100644
index f8bd291..0000000
--- a/include/asm-x86/hardirq_64.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef ASM_X86__HARDIRQ_64_H
-#define ASM_X86__HARDIRQ_64_H
-
-#include <linux/threads.h>
-#include <linux/irq.h>
-#include <asm/pda.h>
-#include <asm/apic.h>
-
-/* We can have at most NR_VECTORS irqs routed to a cpu at a time */
-#define MAX_HARDIRQS_PER_CPU NR_VECTORS
-
-#define __ARCH_IRQ_STAT 1
-
-#define local_softirq_pending() read_pda(__softirq_pending)
-
-#define __ARCH_SET_SOFTIRQ_PENDING 1
-
-#define set_softirq_pending(x) write_pda(__softirq_pending, (x))
-#define or_softirq_pending(x)  or_pda(__softirq_pending, (x))
-
-extern void ack_bad_irq(unsigned int irq);
-
-#endif /* ASM_X86__HARDIRQ_64_H */
diff --git a/include/asm-x86/highmem.h b/include/asm-x86/highmem.h
deleted file mode 100644
index bc3f6a2..0000000
--- a/include/asm-x86/highmem.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * highmem.h: virtual kernel memory mappings for high memory
- *
- * Used in CONFIG_HIGHMEM systems for memory pages which
- * are not addressable by direct kernel virtual addresses.
- *
- * Copyright (C) 1999 Gerhard Wichert, Siemens AG
- *		      Gerhard.Wichert@pdb.siemens.de
- *
- *
- * Redesigned the x86 32-bit VM architecture to deal with
- * up to 16 Terabyte physical memory. With current x86 CPUs
- * we now support up to 64 Gigabytes physical RAM.
- *
- * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
- */
-
-#ifndef ASM_X86__HIGHMEM_H
-#define ASM_X86__HIGHMEM_H
-
-#ifdef __KERNEL__
-
-#include <linux/interrupt.h>
-#include <linux/threads.h>
-#include <asm/kmap_types.h>
-#include <asm/tlbflush.h>
-#include <asm/paravirt.h>
-
-/* declarations for highmem.c */
-extern unsigned long highstart_pfn, highend_pfn;
-
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
-extern pte_t *pkmap_page_table;
-
-/*
- * Right now we initialize only a single pte table. It can be extended
- * easily, subsequent pte tables have to be allocated in one physical
- * chunk of RAM.
- */
-/*
- * Ordering is:
- *
- * FIXADDR_TOP
- * 			fixed_addresses
- * FIXADDR_START
- * 			temp fixed addresses
- * FIXADDR_BOOT_START
- * 			Persistent kmap area
- * PKMAP_BASE
- * VMALLOC_END
- * 			Vmalloc area
- * VMALLOC_START
- * high_memory
- */
-#define LAST_PKMAP_MASK (LAST_PKMAP-1)
-#define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
-#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
-
-extern void *kmap_high(struct page *page);
-extern void kunmap_high(struct page *page);
-
-void *kmap(struct page *page);
-void kunmap(struct page *page);
-void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot);
-void *kmap_atomic(struct page *page, enum km_type type);
-void kunmap_atomic(void *kvaddr, enum km_type type);
-void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
-struct page *kmap_atomic_to_page(void *ptr);
-
-#ifndef CONFIG_PARAVIRT
-#define kmap_atomic_pte(page, type)	kmap_atomic(page, type)
-#endif
-
-#define flush_cache_kmaps()	do { } while (0)
-
-extern void add_highpages_with_active_regions(int nid, unsigned long start_pfn,
-					unsigned long end_pfn);
-
-#endif /* __KERNEL__ */
-
-#endif /* ASM_X86__HIGHMEM_H */
diff --git a/include/asm-x86/hpet.h b/include/asm-x86/hpet.h
deleted file mode 100644
index 58b273f..0000000
--- a/include/asm-x86/hpet.h
+++ /dev/null
@@ -1,114 +0,0 @@
-#ifndef ASM_X86__HPET_H
-#define ASM_X86__HPET_H
-
-#include <linux/msi.h>
-
-#ifdef CONFIG_HPET_TIMER
-
-#define HPET_MMAP_SIZE		1024
-
-#define HPET_ID			0x000
-#define HPET_PERIOD		0x004
-#define HPET_CFG		0x010
-#define HPET_STATUS		0x020
-#define HPET_COUNTER		0x0f0
-
-#define HPET_Tn_CFG(n)		(0x100 + 0x20 * n)
-#define HPET_Tn_CMP(n)		(0x108 + 0x20 * n)
-#define HPET_Tn_ROUTE(n)	(0x110 + 0x20 * n)
-
-#define HPET_T0_CFG		0x100
-#define HPET_T0_CMP		0x108
-#define HPET_T0_ROUTE		0x110
-#define HPET_T1_CFG		0x120
-#define HPET_T1_CMP		0x128
-#define HPET_T1_ROUTE		0x130
-#define HPET_T2_CFG		0x140
-#define HPET_T2_CMP		0x148
-#define HPET_T2_ROUTE		0x150
-
-#define HPET_ID_REV		0x000000ff
-#define HPET_ID_NUMBER		0x00001f00
-#define HPET_ID_64BIT		0x00002000
-#define HPET_ID_LEGSUP		0x00008000
-#define HPET_ID_VENDOR		0xffff0000
-#define	HPET_ID_NUMBER_SHIFT	8
-#define HPET_ID_VENDOR_SHIFT	16
-
-#define HPET_ID_VENDOR_8086	0x8086
-
-#define HPET_CFG_ENABLE		0x001
-#define HPET_CFG_LEGACY		0x002
-#define	HPET_LEGACY_8254	2
-#define	HPET_LEGACY_RTC		8
-
-#define HPET_TN_LEVEL		0x0002
-#define HPET_TN_ENABLE		0x0004
-#define HPET_TN_PERIODIC	0x0008
-#define HPET_TN_PERIODIC_CAP	0x0010
-#define HPET_TN_64BIT_CAP	0x0020
-#define HPET_TN_SETVAL		0x0040
-#define HPET_TN_32BIT		0x0100
-#define HPET_TN_ROUTE		0x3e00
-#define HPET_TN_FSB		0x4000
-#define HPET_TN_FSB_CAP		0x8000
-#define HPET_TN_ROUTE_SHIFT	9
-
-/* Max HPET Period is 10^8 femto sec as in HPET spec */
-#define HPET_MAX_PERIOD		100000000UL
-/*
- * Min HPET period is 10^5 femto sec just for safety. If it is less than this,
- * then 32 bit HPET counter wrapsaround in less than 0.5 sec.
- */
-#define HPET_MIN_PERIOD		100000UL
-
-/* hpet memory map physical address */
-extern unsigned long hpet_address;
-extern unsigned long force_hpet_address;
-extern int hpet_force_user;
-extern int is_hpet_enabled(void);
-extern int hpet_enable(void);
-extern void hpet_disable(void);
-extern unsigned long hpet_readl(unsigned long a);
-extern void force_hpet_resume(void);
-
-extern void hpet_msi_unmask(unsigned int irq);
-extern void hpet_msi_mask(unsigned int irq);
-extern void hpet_msi_write(unsigned int irq, struct msi_msg *msg);
-extern void hpet_msi_read(unsigned int irq, struct msi_msg *msg);
-
-#ifdef CONFIG_PCI_MSI
-extern int arch_setup_hpet_msi(unsigned int irq);
-#else
-static inline int arch_setup_hpet_msi(unsigned int irq)
-{
-	return -EINVAL;
-}
-#endif
-
-#ifdef CONFIG_HPET_EMULATE_RTC
-
-#include <linux/interrupt.h>
-
-typedef irqreturn_t (*rtc_irq_handler)(int interrupt, void *cookie);
-extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask);
-extern int hpet_set_rtc_irq_bit(unsigned long bit_mask);
-extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min,
-			       unsigned char sec);
-extern int hpet_set_periodic_freq(unsigned long freq);
-extern int hpet_rtc_dropped_irq(void);
-extern int hpet_rtc_timer_init(void);
-extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id);
-extern int hpet_register_irq_handler(rtc_irq_handler handler);
-extern void hpet_unregister_irq_handler(rtc_irq_handler handler);
-
-#endif /* CONFIG_HPET_EMULATE_RTC */
-
-#else /* CONFIG_HPET_TIMER */
-
-static inline int hpet_enable(void) { return 0; }
-static inline int is_hpet_enabled(void) { return 0; }
-#define hpet_readl(a) 0
-
-#endif
-#endif /* ASM_X86__HPET_H */
diff --git a/include/asm-x86/hugetlb.h b/include/asm-x86/hugetlb.h
deleted file mode 100644
index 0b7ec5d..0000000
--- a/include/asm-x86/hugetlb.h
+++ /dev/null
@@ -1,93 +0,0 @@
-#ifndef ASM_X86__HUGETLB_H
-#define ASM_X86__HUGETLB_H
-
-#include <asm/page.h>
-
-
-static inline int is_hugepage_only_range(struct mm_struct *mm,
-					 unsigned long addr,
-					 unsigned long len) {
-	return 0;
-}
-
-/*
- * If the arch doesn't supply something else, assume that hugepage
- * size aligned regions are ok without further preparation.
- */
-static inline int prepare_hugepage_range(struct file *file,
-			unsigned long addr, unsigned long len)
-{
-	struct hstate *h = hstate_file(file);
-	if (len & ~huge_page_mask(h))
-		return -EINVAL;
-	if (addr & ~huge_page_mask(h))
-		return -EINVAL;
-	return 0;
-}
-
-static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) {
-}
-
-static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
-					  unsigned long addr, unsigned long end,
-					  unsigned long floor,
-					  unsigned long ceiling)
-{
-	free_pgd_range(tlb, addr, end, floor, ceiling);
-}
-
-static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
-				   pte_t *ptep, pte_t pte)
-{
-	set_pte_at(mm, addr, ptep, pte);
-}
-
-static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
-					    unsigned long addr, pte_t *ptep)
-{
-	return ptep_get_and_clear(mm, addr, ptep);
-}
-
-static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
-					 unsigned long addr, pte_t *ptep)
-{
-}
-
-static inline int huge_pte_none(pte_t pte)
-{
-	return pte_none(pte);
-}
-
-static inline pte_t huge_pte_wrprotect(pte_t pte)
-{
-	return pte_wrprotect(pte);
-}
-
-static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
-					   unsigned long addr, pte_t *ptep)
-{
-	ptep_set_wrprotect(mm, addr, ptep);
-}
-
-static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
-					     unsigned long addr, pte_t *ptep,
-					     pte_t pte, int dirty)
-{
-	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
-}
-
-static inline pte_t huge_ptep_get(pte_t *ptep)
-{
-	return *ptep;
-}
-
-static inline int arch_prepare_hugepage(struct page *page)
-{
-	return 0;
-}
-
-static inline void arch_release_hugepage(struct page *page)
-{
-}
-
-#endif /* ASM_X86__HUGETLB_H */
diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h
deleted file mode 100644
index 749d042..0000000
--- a/include/asm-x86/hw_irq.h
+++ /dev/null
@@ -1,131 +0,0 @@
-#ifndef ASM_X86__HW_IRQ_H
-#define ASM_X86__HW_IRQ_H
-
-/*
- * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
- *
- * moved some of the old arch/i386/kernel/irq.h to here. VY
- *
- * IRQ/IPI changes taken from work by Thomas Radke
- * <tomsoft@informatik.tu-chemnitz.de>
- *
- * hacked by Andi Kleen for x86-64.
- * unified by tglx
- */
-
-#include <asm/irq_vectors.h>
-
-#ifndef __ASSEMBLY__
-
-#include <linux/percpu.h>
-#include <linux/profile.h>
-#include <linux/smp.h>
-
-#include <asm/atomic.h>
-#include <asm/irq.h>
-#include <asm/sections.h>
-
-#define platform_legacy_irq(irq)	((irq) < 16)
-
-/* Interrupt handlers registered during init_IRQ */
-extern void apic_timer_interrupt(void);
-extern void error_interrupt(void);
-extern void spurious_interrupt(void);
-extern void thermal_interrupt(void);
-extern void reschedule_interrupt(void);
-
-extern void invalidate_interrupt(void);
-extern void invalidate_interrupt0(void);
-extern void invalidate_interrupt1(void);
-extern void invalidate_interrupt2(void);
-extern void invalidate_interrupt3(void);
-extern void invalidate_interrupt4(void);
-extern void invalidate_interrupt5(void);
-extern void invalidate_interrupt6(void);
-extern void invalidate_interrupt7(void);
-
-extern void irq_move_cleanup_interrupt(void);
-extern void threshold_interrupt(void);
-
-extern void call_function_interrupt(void);
-extern void call_function_single_interrupt(void);
-
-/* PIC specific functions */
-extern void disable_8259A_irq(unsigned int irq);
-extern void enable_8259A_irq(unsigned int irq);
-extern int i8259A_irq_pending(unsigned int irq);
-extern void make_8259A_irq(unsigned int irq);
-extern void init_8259A(int aeoi);
-
-/* IOAPIC */
-#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs))
-extern unsigned long io_apic_irqs;
-
-extern void init_VISWS_APIC_irqs(void);
-extern void setup_IO_APIC(void);
-extern void disable_IO_APIC(void);
-extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
-extern void setup_ioapic_dest(void);
-
-#ifdef CONFIG_X86_64
-extern void enable_IO_APIC(void);
-#endif
-
-/* IPI functions */
-#ifdef CONFIG_X86_32
-extern void send_IPI_self(int vector);
-#endif
-extern void send_IPI(int dest, int vector);
-
-/* Statistics */
-extern atomic_t irq_err_count;
-extern atomic_t irq_mis_count;
-
-/* EISA */
-extern void eisa_set_level_irq(unsigned int irq);
-
-/* Voyager functions */
-extern asmlinkage void vic_cpi_interrupt(void);
-extern asmlinkage void vic_sys_interrupt(void);
-extern asmlinkage void vic_cmn_interrupt(void);
-extern asmlinkage void qic_timer_interrupt(void);
-extern asmlinkage void qic_invalidate_interrupt(void);
-extern asmlinkage void qic_reschedule_interrupt(void);
-extern asmlinkage void qic_enable_irq_interrupt(void);
-extern asmlinkage void qic_call_function_interrupt(void);
-
-/* SMP */
-extern void smp_apic_timer_interrupt(struct pt_regs *);
-extern void smp_spurious_interrupt(struct pt_regs *);
-extern void smp_error_interrupt(struct pt_regs *);
-#ifdef CONFIG_X86_SMP
-extern void smp_reschedule_interrupt(struct pt_regs *);
-extern void smp_call_function_interrupt(struct pt_regs *);
-extern void smp_call_function_single_interrupt(struct pt_regs *);
-#ifdef CONFIG_X86_32
-extern void smp_invalidate_interrupt(struct pt_regs *);
-#else
-extern asmlinkage void smp_invalidate_interrupt(struct pt_regs *);
-#endif
-#endif
-
-#ifdef CONFIG_X86_32
-extern void (*const interrupt[NR_VECTORS])(void);
-#endif
-
-typedef int vector_irq_t[NR_VECTORS];
-DECLARE_PER_CPU(vector_irq_t, vector_irq);
-
-#ifdef CONFIG_X86_IO_APIC
-extern void lock_vector_lock(void);
-extern void unlock_vector_lock(void);
-extern void __setup_vector_irq(int cpu);
-#else
-static inline void lock_vector_lock(void) {}
-static inline void unlock_vector_lock(void) {}
-static inline void __setup_vector_irq(int cpu) {}
-#endif
-
-#endif /* !ASSEMBLY_ */
-
-#endif /* ASM_X86__HW_IRQ_H */
diff --git a/include/asm-x86/hypertransport.h b/include/asm-x86/hypertransport.h
deleted file mode 100644
index cc011a3..0000000
--- a/include/asm-x86/hypertransport.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef ASM_X86__HYPERTRANSPORT_H
-#define ASM_X86__HYPERTRANSPORT_H
-
-/*
- * Constants for x86 Hypertransport Interrupts.
- */
-
-#define HT_IRQ_LOW_BASE			0xf8000000
-
-#define HT_IRQ_LOW_VECTOR_SHIFT		16
-#define HT_IRQ_LOW_VECTOR_MASK		0x00ff0000
-#define HT_IRQ_LOW_VECTOR(v)						\
-	(((v) << HT_IRQ_LOW_VECTOR_SHIFT) & HT_IRQ_LOW_VECTOR_MASK)
-
-#define HT_IRQ_LOW_DEST_ID_SHIFT	8
-#define HT_IRQ_LOW_DEST_ID_MASK		0x0000ff00
-#define HT_IRQ_LOW_DEST_ID(v)						\
-	(((v) << HT_IRQ_LOW_DEST_ID_SHIFT) & HT_IRQ_LOW_DEST_ID_MASK)
-
-#define HT_IRQ_LOW_DM_PHYSICAL		0x0000000
-#define HT_IRQ_LOW_DM_LOGICAL		0x0000040
-
-#define HT_IRQ_LOW_RQEOI_EDGE		0x0000000
-#define HT_IRQ_LOW_RQEOI_LEVEL		0x0000020
-
-
-#define HT_IRQ_LOW_MT_FIXED		0x0000000
-#define HT_IRQ_LOW_MT_ARBITRATED	0x0000004
-#define HT_IRQ_LOW_MT_SMI		0x0000008
-#define HT_IRQ_LOW_MT_NMI		0x000000c
-#define HT_IRQ_LOW_MT_INIT		0x0000010
-#define HT_IRQ_LOW_MT_STARTUP		0x0000014
-#define HT_IRQ_LOW_MT_EXTINT		0x0000018
-#define HT_IRQ_LOW_MT_LINT1		0x000008c
-#define HT_IRQ_LOW_MT_LINT0		0x0000098
-
-#define HT_IRQ_LOW_IRQ_MASKED		0x0000001
-
-
-#define HT_IRQ_HIGH_DEST_ID_SHIFT	0
-#define HT_IRQ_HIGH_DEST_ID_MASK	0x00ffffff
-#define HT_IRQ_HIGH_DEST_ID(v)						\
-	((((v) >> 8) << HT_IRQ_HIGH_DEST_ID_SHIFT) & HT_IRQ_HIGH_DEST_ID_MASK)
-
-#endif /* ASM_X86__HYPERTRANSPORT_H */
diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h
deleted file mode 100644
index 9ba862a..0000000
--- a/include/asm-x86/i387.h
+++ /dev/null
@@ -1,400 +0,0 @@
-/*
- * Copyright (C) 1994 Linus Torvalds
- *
- * Pentium III FXSR, SSE support
- * General FPU state handling cleanups
- *	Gareth Hughes <gareth@valinux.com>, May 2000
- * x86-64 work by Andi Kleen 2002
- */
-
-#ifndef ASM_X86__I387_H
-#define ASM_X86__I387_H
-
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/regset.h>
-#include <linux/hardirq.h>
-#include <asm/asm.h>
-#include <asm/processor.h>
-#include <asm/sigcontext.h>
-#include <asm/user.h>
-#include <asm/uaccess.h>
-#include <asm/xsave.h>
-
-extern unsigned int sig_xstate_size;
-extern void fpu_init(void);
-extern void mxcsr_feature_mask_init(void);
-extern int init_fpu(struct task_struct *child);
-extern asmlinkage void math_state_restore(void);
-extern void init_thread_xstate(void);
-extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
-
-extern user_regset_active_fn fpregs_active, xfpregs_active;
-extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get;
-extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set;
-
-extern struct _fpx_sw_bytes fx_sw_reserved;
-#ifdef CONFIG_IA32_EMULATION
-extern unsigned int sig_xstate_ia32_size;
-extern struct _fpx_sw_bytes fx_sw_reserved_ia32;
-struct _fpstate_ia32;
-struct _xstate_ia32;
-extern int save_i387_xstate_ia32(void __user *buf);
-extern int restore_i387_xstate_ia32(void __user *buf);
-#endif
-
-#define X87_FSW_ES (1 << 7)	/* Exception Summary */
-
-#ifdef CONFIG_X86_64
-
-/* Ignore delayed exceptions from user space */
-static inline void tolerant_fwait(void)
-{
-	asm volatile("1: fwait\n"
-		     "2:\n"
-		     _ASM_EXTABLE(1b, 2b));
-}
-
-static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
-{
-	int err;
-
-	asm volatile("1:  rex64/fxrstor (%[fx])\n\t"
-		     "2:\n"
-		     ".section .fixup,\"ax\"\n"
-		     "3:  movl $-1,%[err]\n"
-		     "    jmp  2b\n"
-		     ".previous\n"
-		     _ASM_EXTABLE(1b, 3b)
-		     : [err] "=r" (err)
-#if 0 /* See comment in __save_init_fpu() below. */
-		     : [fx] "r" (fx), "m" (*fx), "0" (0));
-#else
-		     : [fx] "cdaSDb" (fx), "m" (*fx), "0" (0));
-#endif
-	return err;
-}
-
-static inline int restore_fpu_checking(struct task_struct *tsk)
-{
-	if (task_thread_info(tsk)->status & TS_XSAVE)
-		return xrstor_checking(&tsk->thread.xstate->xsave);
-	else
-		return fxrstor_checking(&tsk->thread.xstate->fxsave);
-}
-
-/* AMD CPUs don't save/restore FDP/FIP/FOP unless an exception
-   is pending. Clear the x87 state here by setting it to fixed
-   values. The kernel data segment can be sometimes 0 and sometimes
-   new user value. Both should be ok.
-   Use the PDA as safe address because it should be already in L1. */
-static inline void clear_fpu_state(struct task_struct *tsk)
-{
-	struct xsave_struct *xstate = &tsk->thread.xstate->xsave;
-	struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
-
-	/*
-	 * xsave header may indicate the init state of the FP.
-	 */
-	if ((task_thread_info(tsk)->status & TS_XSAVE) &&
-	    !(xstate->xsave_hdr.xstate_bv & XSTATE_FP))
-		return;
-
-	if (unlikely(fx->swd & X87_FSW_ES))
-		asm volatile("fnclex");
-	alternative_input(ASM_NOP8 ASM_NOP2,
-			  "    emms\n"		/* clear stack tags */
-			  "    fildl %%gs:0",	/* load to clear state */
-			  X86_FEATURE_FXSAVE_LEAK);
-}
-
-static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
-{
-	int err;
-
-	asm volatile("1:  rex64/fxsave (%[fx])\n\t"
-		     "2:\n"
-		     ".section .fixup,\"ax\"\n"
-		     "3:  movl $-1,%[err]\n"
-		     "    jmp  2b\n"
-		     ".previous\n"
-		     _ASM_EXTABLE(1b, 3b)
-		     : [err] "=r" (err), "=m" (*fx)
-#if 0 /* See comment in __fxsave_clear() below. */
-		     : [fx] "r" (fx), "0" (0));
-#else
-		     : [fx] "cdaSDb" (fx), "0" (0));
-#endif
-	if (unlikely(err) &&
-	    __clear_user(fx, sizeof(struct i387_fxsave_struct)))
-		err = -EFAULT;
-	/* No need to clear here because the caller clears USED_MATH */
-	return err;
-}
-
-static inline void fxsave(struct task_struct *tsk)
-{
-	/* Using "rex64; fxsave %0" is broken because, if the memory operand
-	   uses any extended registers for addressing, a second REX prefix
-	   will be generated (to the assembler, rex64 followed by semicolon
-	   is a separate instruction), and hence the 64-bitness is lost. */
-#if 0
-	/* Using "fxsaveq %0" would be the ideal choice, but is only supported
-	   starting with gas 2.16. */
-	__asm__ __volatile__("fxsaveq %0"
-			     : "=m" (tsk->thread.xstate->fxsave));
-#elif 0
-	/* Using, as a workaround, the properly prefixed form below isn't
-	   accepted by any binutils version so far released, complaining that
-	   the same type of prefix is used twice if an extended register is
-	   needed for addressing (fix submitted to mainline 2005-11-21). */
-	__asm__ __volatile__("rex64/fxsave %0"
-			     : "=m" (tsk->thread.xstate->fxsave));
-#else
-	/* This, however, we can work around by forcing the compiler to select
-	   an addressing mode that doesn't require extended registers. */
-	__asm__ __volatile__("rex64/fxsave (%1)"
-			     : "=m" (tsk->thread.xstate->fxsave)
-			     : "cdaSDb" (&tsk->thread.xstate->fxsave));
-#endif
-}
-
-static inline void __save_init_fpu(struct task_struct *tsk)
-{
-	if (task_thread_info(tsk)->status & TS_XSAVE)
-		xsave(tsk);
-	else
-		fxsave(tsk);
-
-	clear_fpu_state(tsk);
-	task_thread_info(tsk)->status &= ~TS_USEDFPU;
-}
-
-#else  /* CONFIG_X86_32 */
-
-extern void finit(void);
-
-static inline void tolerant_fwait(void)
-{
-	asm volatile("fnclex ; fwait");
-}
-
-static inline void restore_fpu(struct task_struct *tsk)
-{
-	if (task_thread_info(tsk)->status & TS_XSAVE) {
-		xrstor_checking(&tsk->thread.xstate->xsave);
-		return;
-	}
-	/*
-	 * The "nop" is needed to make the instructions the same
-	 * length.
-	 */
-	alternative_input(
-		"nop ; frstor %1",
-		"fxrstor %1",
-		X86_FEATURE_FXSR,
-		"m" (tsk->thread.xstate->fxsave));
-}
-
-/* We need a safe address that is cheap to find and that is already
-   in L1 during context switch. The best choices are unfortunately
-   different for UP and SMP */
-#ifdef CONFIG_SMP
-#define safe_address (__per_cpu_offset[0])
-#else
-#define safe_address (kstat_cpu(0).cpustat.user)
-#endif
-
-/*
- * These must be called with preempt disabled
- */
-static inline void __save_init_fpu(struct task_struct *tsk)
-{
-	if (task_thread_info(tsk)->status & TS_XSAVE) {
-		struct xsave_struct *xstate = &tsk->thread.xstate->xsave;
-		struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
-
-		xsave(tsk);
-
-		/*
-		 * xsave header may indicate the init state of the FP.
-		 */
-		if (!(xstate->xsave_hdr.xstate_bv & XSTATE_FP))
-			goto end;
-
-		if (unlikely(fx->swd & X87_FSW_ES))
-			asm volatile("fnclex");
-
-		/*
-		 * we can do a simple return here or be paranoid :)
-		 */
-		goto clear_state;
-	}
-
-	/* Use more nops than strictly needed in case the compiler
-	   varies code */
-	alternative_input(
-		"fnsave %[fx] ;fwait;" GENERIC_NOP8 GENERIC_NOP4,
-		"fxsave %[fx]\n"
-		"bt $7,%[fsw] ; jnc 1f ; fnclex\n1:",
-		X86_FEATURE_FXSR,
-		[fx] "m" (tsk->thread.xstate->fxsave),
-		[fsw] "m" (tsk->thread.xstate->fxsave.swd) : "memory");
-clear_state:
-	/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
-	   is pending.  Clear the x87 state here by setting it to fixed
-	   values. safe_address is a random variable that should be in L1 */
-	alternative_input(
-		GENERIC_NOP8 GENERIC_NOP2,
-		"emms\n\t"	  	/* clear stack tags */
-		"fildl %[addr]", 	/* set F?P to defined value */
-		X86_FEATURE_FXSAVE_LEAK,
-		[addr] "m" (safe_address));
-end:
-	task_thread_info(tsk)->status &= ~TS_USEDFPU;
-}
-
-#endif	/* CONFIG_X86_64 */
-
-/*
- * Signal frame handlers...
- */
-extern int save_i387_xstate(void __user *buf);
-extern int restore_i387_xstate(void __user *buf);
-
-static inline void __unlazy_fpu(struct task_struct *tsk)
-{
-	if (task_thread_info(tsk)->status & TS_USEDFPU) {
-		__save_init_fpu(tsk);
-		stts();
-	} else
-		tsk->fpu_counter = 0;
-}
-
-static inline void __clear_fpu(struct task_struct *tsk)
-{
-	if (task_thread_info(tsk)->status & TS_USEDFPU) {
-		tolerant_fwait();
-		task_thread_info(tsk)->status &= ~TS_USEDFPU;
-		stts();
-	}
-}
-
-static inline void kernel_fpu_begin(void)
-{
-	struct thread_info *me = current_thread_info();
-	preempt_disable();
-	if (me->status & TS_USEDFPU)
-		__save_init_fpu(me->task);
-	else
-		clts();
-}
-
-static inline void kernel_fpu_end(void)
-{
-	stts();
-	preempt_enable();
-}
-
-/*
- * Some instructions like VIA's padlock instructions generate a spurious
- * DNA fault but don't modify SSE registers. And these instructions
- * get used from interrupt context aswell. To prevent these kernel instructions
- * in interrupt context interact wrongly with other user/kernel fpu usage, we
- * should use them only in the context of irq_ts_save/restore()
- */
-static inline int irq_ts_save(void)
-{
-	/*
-	 * If we are in process context, we are ok to take a spurious DNA fault.
-	 * Otherwise, doing clts() in process context require pre-emption to
-	 * be disabled or some heavy lifting like kernel_fpu_begin()
-	 */
-	if (!in_interrupt())
-		return 0;
-
-	if (read_cr0() & X86_CR0_TS) {
-		clts();
-		return 1;
-	}
-
-	return 0;
-}
-
-static inline void irq_ts_restore(int TS_state)
-{
-	if (TS_state)
-		stts();
-}
-
-#ifdef CONFIG_X86_64
-
-static inline void save_init_fpu(struct task_struct *tsk)
-{
-	__save_init_fpu(tsk);
-	stts();
-}
-
-#define unlazy_fpu	__unlazy_fpu
-#define clear_fpu	__clear_fpu
-
-#else  /* CONFIG_X86_32 */
-
-/*
- * These disable preemption on their own and are safe
- */
-static inline void save_init_fpu(struct task_struct *tsk)
-{
-	preempt_disable();
-	__save_init_fpu(tsk);
-	stts();
-	preempt_enable();
-}
-
-static inline void unlazy_fpu(struct task_struct *tsk)
-{
-	preempt_disable();
-	__unlazy_fpu(tsk);
-	preempt_enable();
-}
-
-static inline void clear_fpu(struct task_struct *tsk)
-{
-	preempt_disable();
-	__clear_fpu(tsk);
-	preempt_enable();
-}
-
-#endif	/* CONFIG_X86_64 */
-
-/*
- * i387 state interaction
- */
-static inline unsigned short get_fpu_cwd(struct task_struct *tsk)
-{
-	if (cpu_has_fxsr) {
-		return tsk->thread.xstate->fxsave.cwd;
-	} else {
-		return (unsigned short)tsk->thread.xstate->fsave.cwd;
-	}
-}
-
-static inline unsigned short get_fpu_swd(struct task_struct *tsk)
-{
-	if (cpu_has_fxsr) {
-		return tsk->thread.xstate->fxsave.swd;
-	} else {
-		return (unsigned short)tsk->thread.xstate->fsave.swd;
-	}
-}
-
-static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk)
-{
-	if (cpu_has_xmm) {
-		return tsk->thread.xstate->fxsave.mxcsr;
-	} else {
-		return MXCSR_DEFAULT;
-	}
-}
-
-#endif /* ASM_X86__I387_H */
diff --git a/include/asm-x86/i8253.h b/include/asm-x86/i8253.h
deleted file mode 100644
index 15a5b53..0000000
--- a/include/asm-x86/i8253.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef ASM_X86__I8253_H
-#define ASM_X86__I8253_H
-
-/* i8253A PIT registers */
-#define PIT_MODE		0x43
-#define PIT_CH0			0x40
-#define PIT_CH2			0x42
-
-extern spinlock_t i8253_lock;
-
-extern struct clock_event_device *global_clock_event;
-
-extern void setup_pit_timer(void);
-
-#define inb_pit		inb_p
-#define outb_pit	outb_p
-
-#endif /* ASM_X86__I8253_H */
diff --git a/include/asm-x86/i8259.h b/include/asm-x86/i8259.h
deleted file mode 100644
index 23c1b3b..0000000
--- a/include/asm-x86/i8259.h
+++ /dev/null
@@ -1,63 +0,0 @@
-#ifndef ASM_X86__I8259_H
-#define ASM_X86__I8259_H
-
-#include <linux/delay.h>
-
-extern unsigned int cached_irq_mask;
-
-#define __byte(x, y)		(((unsigned char *)&(y))[x])
-#define cached_master_mask	(__byte(0, cached_irq_mask))
-#define cached_slave_mask	(__byte(1, cached_irq_mask))
-
-/* i8259A PIC registers */
-#define PIC_MASTER_CMD		0x20
-#define PIC_MASTER_IMR		0x21
-#define PIC_MASTER_ISR		PIC_MASTER_CMD
-#define PIC_MASTER_POLL		PIC_MASTER_ISR
-#define PIC_MASTER_OCW3		PIC_MASTER_ISR
-#define PIC_SLAVE_CMD		0xa0
-#define PIC_SLAVE_IMR		0xa1
-
-/* i8259A PIC related value */
-#define PIC_CASCADE_IR		2
-#define MASTER_ICW4_DEFAULT	0x01
-#define SLAVE_ICW4_DEFAULT	0x01
-#define PIC_ICW4_AEOI		2
-
-extern spinlock_t i8259A_lock;
-
-extern void init_8259A(int auto_eoi);
-extern void enable_8259A_irq(unsigned int irq);
-extern void disable_8259A_irq(unsigned int irq);
-extern unsigned int startup_8259A_irq(unsigned int irq);
-
-/* the PIC may need a careful delay on some platforms, hence specific calls */
-static inline unsigned char inb_pic(unsigned int port)
-{
-	unsigned char value = inb(port);
-
-	/*
-	 * delay for some accesses to PIC on motherboard or in chipset
-	 * must be at least one microsecond, so be safe here:
-	 */
-	udelay(2);
-
-	return value;
-}
-
-static inline void outb_pic(unsigned char value, unsigned int port)
-{
-	outb(value, port);
-	/*
-	 * delay for some accesses to PIC on motherboard or in chipset
-	 * must be at least one microsecond, so be safe here:
-	 */
-	udelay(2);
-}
-
-extern struct irq_chip i8259A_chip;
-
-extern void mask_8259A(void);
-extern void unmask_8259A(void);
-
-#endif /* ASM_X86__I8259_H */
diff --git a/include/asm-x86/ia32.h b/include/asm-x86/ia32.h
deleted file mode 100644
index f932f7a..0000000
--- a/include/asm-x86/ia32.h
+++ /dev/null
@@ -1,170 +0,0 @@
-#ifndef ASM_X86__IA32_H
-#define ASM_X86__IA32_H
-
-
-#ifdef CONFIG_IA32_EMULATION
-
-#include <linux/compat.h>
-
-/*
- * 32 bit structures for IA32 support.
- */
-
-#include <asm/sigcontext32.h>
-
-/* signal.h */
-struct sigaction32 {
-	unsigned int  sa_handler;	/* Really a pointer, but need to deal
-					   with 32 bits */
-	unsigned int sa_flags;
-	unsigned int sa_restorer;	/* Another 32 bit pointer */
-	compat_sigset_t sa_mask;	/* A 32 bit mask */
-};
-
-struct old_sigaction32 {
-	unsigned int  sa_handler;	/* Really a pointer, but need to deal
-					   with 32 bits */
-	compat_old_sigset_t sa_mask;	/* A 32 bit mask */
-	unsigned int sa_flags;
-	unsigned int sa_restorer;	/* Another 32 bit pointer */
-};
-
-typedef struct sigaltstack_ia32 {
-	unsigned int	ss_sp;
-	int		ss_flags;
-	unsigned int	ss_size;
-} stack_ia32_t;
-
-struct ucontext_ia32 {
-	unsigned int	  uc_flags;
-	unsigned int 	  uc_link;
-	stack_ia32_t	  uc_stack;
-	struct sigcontext_ia32 uc_mcontext;
-	compat_sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-/* This matches struct stat64 in glibc2.2, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
-	unsigned long long	st_dev;
-	unsigned char		__pad0[4];
-
-#define STAT64_HAS_BROKEN_ST_INO	1
-	unsigned int		__st_ino;
-
-	unsigned int		st_mode;
-	unsigned int		st_nlink;
-
-	unsigned int		st_uid;
-	unsigned int		st_gid;
-
-	unsigned long long	st_rdev;
-	unsigned char		__pad3[4];
-
-	long long		st_size;
-	unsigned int		st_blksize;
-
-	long long		st_blocks;/* Number 512-byte blocks allocated */
-
-	unsigned 		st_atime;
-	unsigned 		st_atime_nsec;
-	unsigned 		st_mtime;
-	unsigned 		st_mtime_nsec;
-	unsigned 		st_ctime;
-	unsigned 		st_ctime_nsec;
-
-	unsigned long long	st_ino;
-} __attribute__((packed));
-
-typedef struct compat_siginfo {
-	int si_signo;
-	int si_errno;
-	int si_code;
-
-	union {
-		int _pad[((128 / sizeof(int)) - 3)];
-
-		/* kill() */
-		struct {
-			unsigned int _pid;	/* sender's pid */
-			unsigned int _uid;	/* sender's uid */
-		} _kill;
-
-		/* POSIX.1b timers */
-		struct {
-			compat_timer_t _tid;	/* timer id */
-			int _overrun;		/* overrun count */
-			compat_sigval_t _sigval;	/* same as below */
-			int _sys_private;	/* not to be passed to user */
-			int _overrun_incr;	/* amount to add to overrun */
-		} _timer;
-
-		/* POSIX.1b signals */
-		struct {
-			unsigned int _pid;	/* sender's pid */
-			unsigned int _uid;	/* sender's uid */
-			compat_sigval_t _sigval;
-		} _rt;
-
-		/* SIGCHLD */
-		struct {
-			unsigned int _pid;	/* which child */
-			unsigned int _uid;	/* sender's uid */
-			int _status;		/* exit code */
-			compat_clock_t _utime;
-			compat_clock_t _stime;
-		} _sigchld;
-
-		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
-		struct {
-			unsigned int _addr;	/* faulting insn/memory ref. */
-		} _sigfault;
-
-		/* SIGPOLL */
-		struct {
-			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
-			int _fd;
-		} _sigpoll;
-	} _sifields;
-} compat_siginfo_t;
-
-struct sigframe32 {
-	u32 pretcode;
-	int sig;
-	struct sigcontext_ia32 sc;
-	struct _fpstate_ia32 fpstate;
-	unsigned int extramask[_COMPAT_NSIG_WORDS-1];
-};
-
-struct rt_sigframe32 {
-	u32 pretcode;
-	int sig;
-	u32 pinfo;
-	u32 puc;
-	compat_siginfo_t info;
-	struct ucontext_ia32 uc;
-	struct _fpstate_ia32 fpstate;
-};
-
-struct ustat32 {
-	__u32			f_tfree;
-	compat_ino_t		f_tinode;
-	char			f_fname[6];
-	char			f_fpack[6];
-};
-
-#define IA32_STACK_TOP IA32_PAGE_OFFSET
-
-#ifdef __KERNEL__
-struct linux_binprm;
-extern int ia32_setup_arg_pages(struct linux_binprm *bprm,
-				unsigned long stack_top, int exec_stack);
-struct mm_struct;
-extern void ia32_pick_mmap_layout(struct mm_struct *mm);
-
-#endif
-
-#endif /* !CONFIG_IA32_SUPPORT */
-
-#endif /* ASM_X86__IA32_H */
diff --git a/include/asm-x86/ia32_unistd.h b/include/asm-x86/ia32_unistd.h
deleted file mode 100644
index dbd887d..0000000
--- a/include/asm-x86/ia32_unistd.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef ASM_X86__IA32_UNISTD_H
-#define ASM_X86__IA32_UNISTD_H
-
-/*
- * This file contains the system call numbers of the ia32 port,
- * this is for the kernel only.
- * Only add syscalls here where some part of the kernel needs to know
- * the number. This should be otherwise in sync with asm-x86/unistd_32.h. -AK
- */
-
-#define __NR_ia32_restart_syscall 0
-#define __NR_ia32_exit		  1
-#define __NR_ia32_read		  3
-#define __NR_ia32_write		  4
-#define __NR_ia32_sigreturn	119
-#define __NR_ia32_rt_sigreturn	173
-
-#endif /* ASM_X86__IA32_UNISTD_H */
diff --git a/include/asm-x86/idle.h b/include/asm-x86/idle.h
deleted file mode 100644
index baa3f783..0000000
--- a/include/asm-x86/idle.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef ASM_X86__IDLE_H
-#define ASM_X86__IDLE_H
-
-#define IDLE_START 1
-#define IDLE_END 2
-
-struct notifier_block;
-void idle_notifier_register(struct notifier_block *n);
-
-void enter_idle(void);
-void exit_idle(void);
-
-void c1e_remove_cpu(int cpu);
-
-#endif /* ASM_X86__IDLE_H */
diff --git a/include/asm-x86/intel_arch_perfmon.h b/include/asm-x86/intel_arch_perfmon.h
deleted file mode 100644
index 07c03c6c..0000000
--- a/include/asm-x86/intel_arch_perfmon.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef ASM_X86__INTEL_ARCH_PERFMON_H
-#define ASM_X86__INTEL_ARCH_PERFMON_H
-
-#define MSR_ARCH_PERFMON_PERFCTR0		0xc1
-#define MSR_ARCH_PERFMON_PERFCTR1		0xc2
-
-#define MSR_ARCH_PERFMON_EVENTSEL0		0x186
-#define MSR_ARCH_PERFMON_EVENTSEL1		0x187
-
-#define ARCH_PERFMON_EVENTSEL0_ENABLE	(1 << 22)
-#define ARCH_PERFMON_EVENTSEL_INT	(1 << 20)
-#define ARCH_PERFMON_EVENTSEL_OS	(1 << 17)
-#define ARCH_PERFMON_EVENTSEL_USR	(1 << 16)
-
-#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL	(0x3c)
-#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK	(0x00 << 8)
-#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX (0)
-#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT \
-	(1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX))
-
-union cpuid10_eax {
-	struct {
-		unsigned int version_id:8;
-		unsigned int num_counters:8;
-		unsigned int bit_width:8;
-		unsigned int mask_length:8;
-	} split;
-	unsigned int full;
-};
-
-#endif /* ASM_X86__INTEL_ARCH_PERFMON_H */
diff --git a/include/asm-x86/io.h b/include/asm-x86/io.h
deleted file mode 100644
index a233f83..0000000
--- a/include/asm-x86/io.h
+++ /dev/null
@@ -1,91 +0,0 @@
-#ifndef ASM_X86__IO_H
-#define ASM_X86__IO_H
-
-#define ARCH_HAS_IOREMAP_WC
-
-#include <linux/compiler.h>
-
-#define build_mmio_read(name, size, type, reg, barrier) \
-static inline type name(const volatile void __iomem *addr) \
-{ type ret; asm volatile("mov" size " %1,%0":reg (ret) \
-:"m" (*(volatile type __force *)addr) barrier); return ret; }
-
-#define build_mmio_write(name, size, type, reg, barrier) \
-static inline void name(type val, volatile void __iomem *addr) \
-{ asm volatile("mov" size " %0,%1": :reg (val), \
-"m" (*(volatile type __force *)addr) barrier); }
-
-build_mmio_read(readb, "b", unsigned char, "=q", :"memory")
-build_mmio_read(readw, "w", unsigned short, "=r", :"memory")
-build_mmio_read(readl, "l", unsigned int, "=r", :"memory")
-
-build_mmio_read(__readb, "b", unsigned char, "=q", )
-build_mmio_read(__readw, "w", unsigned short, "=r", )
-build_mmio_read(__readl, "l", unsigned int, "=r", )
-
-build_mmio_write(writeb, "b", unsigned char, "q", :"memory")
-build_mmio_write(writew, "w", unsigned short, "r", :"memory")
-build_mmio_write(writel, "l", unsigned int, "r", :"memory")
-
-build_mmio_write(__writeb, "b", unsigned char, "q", )
-build_mmio_write(__writew, "w", unsigned short, "r", )
-build_mmio_write(__writel, "l", unsigned int, "r", )
-
-#define readb_relaxed(a) __readb(a)
-#define readw_relaxed(a) __readw(a)
-#define readl_relaxed(a) __readl(a)
-#define __raw_readb __readb
-#define __raw_readw __readw
-#define __raw_readl __readl
-
-#define __raw_writeb __writeb
-#define __raw_writew __writew
-#define __raw_writel __writel
-
-#define mmiowb() barrier()
-
-#ifdef CONFIG_X86_64
-build_mmio_read(readq, "q", unsigned long, "=r", :"memory")
-build_mmio_read(__readq, "q", unsigned long, "=r", )
-build_mmio_write(writeq, "q", unsigned long, "r", :"memory")
-build_mmio_write(__writeq, "q", unsigned long, "r", )
-
-#define readq_relaxed(a) __readq(a)
-#define __raw_readq __readq
-#define __raw_writeq writeq
-
-/* Let people know we have them */
-#define readq readq
-#define writeq writeq
-#endif
-
-extern int iommu_bio_merge;
-
-#ifdef CONFIG_X86_32
-# include "io_32.h"
-#else
-# include "io_64.h"
-#endif
-
-extern void *xlate_dev_mem_ptr(unsigned long phys);
-extern void unxlate_dev_mem_ptr(unsigned long phys, void *addr);
-
-extern int ioremap_change_attr(unsigned long vaddr, unsigned long size,
-				unsigned long prot_val);
-extern void __iomem *ioremap_wc(unsigned long offset, unsigned long size);
-
-/*
- * early_ioremap() and early_iounmap() are for temporary early boot-time
- * mappings, before the real ioremap() is functional.
- * A boot-time mapping is currently limited to at most 16 pages.
- */
-extern void early_ioremap_init(void);
-extern void early_ioremap_clear(void);
-extern void early_ioremap_reset(void);
-extern void *early_ioremap(unsigned long offset, unsigned long size);
-extern void *early_memremap(unsigned long offset, unsigned long size);
-extern void early_iounmap(void *addr, unsigned long size);
-extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
-
-
-#endif /* ASM_X86__IO_H */
diff --git a/include/asm-x86/io_32.h b/include/asm-x86/io_32.h
deleted file mode 100644
index 4f7d878..0000000
--- a/include/asm-x86/io_32.h
+++ /dev/null
@@ -1,284 +0,0 @@
-#ifndef ASM_X86__IO_32_H
-#define ASM_X86__IO_32_H
-
-#include <linux/string.h>
-#include <linux/compiler.h>
-
-/*
- * This file contains the definitions for the x86 IO instructions
- * inb/inw/inl/outb/outw/outl and the "string versions" of the same
- * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
- * versions of the single-IO instructions (inb_p/inw_p/..).
- *
- * This file is not meant to be obfuscating: it's just complicated
- * to (a) handle it all in a way that makes gcc able to optimize it
- * as well as possible and (b) trying to avoid writing the same thing
- * over and over again with slight variations and possibly making a
- * mistake somewhere.
- */
-
-/*
- * Thanks to James van Artsdalen for a better timing-fix than
- * the two short jumps: using outb's to a nonexistent port seems
- * to guarantee better timings even on fast machines.
- *
- * On the other hand, I'd like to be sure of a non-existent port:
- * I feel a bit unsafe about using 0x80 (should be safe, though)
- *
- *		Linus
- */
-
- /*
-  *  Bit simplified and optimized by Jan Hubicka
-  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
-  *
-  *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
-  *  isa_read[wl] and isa_write[wl] fixed
-  *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-  */
-
-#define IO_SPACE_LIMIT 0xffff
-
-#define XQUAD_PORTIO_BASE 0xfe400000
-#define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
-
-#ifdef __KERNEL__
-
-#include <asm-generic/iomap.h>
-
-#include <linux/vmalloc.h>
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-/**
- *	virt_to_phys	-	map virtual addresses to physical
- *	@address: address to remap
- *
- *	The returned physical address is the physical (CPU) mapping for
- *	the memory address given. It is only valid to use this function on
- *	addresses directly mapped or allocated via kmalloc.
- *
- *	This function does not give bus mappings for DMA transfers. In
- *	almost all conceivable cases a device driver should not be using
- *	this function
- */
-
-static inline unsigned long virt_to_phys(volatile void *address)
-{
-	return __pa(address);
-}
-
-/**
- *	phys_to_virt	-	map physical address to virtual
- *	@address: address to remap
- *
- *	The returned virtual address is a current CPU mapping for
- *	the memory address given. It is only valid to use this function on
- *	addresses that have a kernel mapping
- *
- *	This function does not handle bus mappings for DMA transfers. In
- *	almost all conceivable cases a device driver should not be using
- *	this function
- */
-
-static inline void *phys_to_virt(unsigned long address)
-{
-	return __va(address);
-}
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-
-/**
- * ioremap     -   map bus memory into CPU space
- * @offset:    bus address of the memory
- * @size:      size of the resource to map
- *
- * ioremap performs a platform specific sequence of operations to
- * make bus memory CPU accessible via the readb/readw/readl/writeb/
- * writew/writel functions and the other mmio helpers. The returned
- * address is not guaranteed to be usable directly as a virtual
- * address.
- *
- * If the area you are trying to map is a PCI BAR you should have a
- * look at pci_iomap().
- */
-extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
-				unsigned long prot_val);
-
-/*
- * The default ioremap() behavior is non-cached:
- */
-static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
-{
-	return ioremap_nocache(offset, size);
-}
-
-extern void iounmap(volatile void __iomem *addr);
-
-/*
- * ISA I/O bus memory addresses are 1:1 with the physical address.
- */
-#define isa_virt_to_bus virt_to_phys
-#define isa_page_to_bus page_to_phys
-#define isa_bus_to_virt phys_to_virt
-
-/*
- * However PCI ones are not necessarily 1:1 and therefore these interfaces
- * are forbidden in portable PCI drivers.
- *
- * Allow them on x86 for legacy drivers, though.
- */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-static inline void
-memset_io(volatile void __iomem *addr, unsigned char val, int count)
-{
-	memset((void __force *)addr, val, count);
-}
-
-static inline void
-memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
-{
-	__memcpy(dst, (const void __force *)src, count);
-}
-
-static inline void
-memcpy_toio(volatile void __iomem *dst, const void *src, int count)
-{
-	__memcpy((void __force *)dst, src, count);
-}
-
-/*
- * ISA space is 'always mapped' on a typical x86 system, no need to
- * explicitly ioremap() it. The fact that the ISA IO space is mapped
- * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
- * are physical addresses. The following constant pointer can be
- * used as the IO-area pointer (it can be iounmapped as well, so the
- * analogy with PCI is quite large):
- */
-#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
-
-/*
- *	Cache management
- *
- *	This needed for two cases
- *	1. Out of order aware processors
- *	2. Accidentally out of order processors (PPro errata #51)
- */
-
-#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE)
-
-static inline void flush_write_buffers(void)
-{
-	asm volatile("lock; addl $0,0(%%esp)": : :"memory");
-}
-
-#else
-
-#define flush_write_buffers() do { } while (0)
-
-#endif
-
-#endif /* __KERNEL__ */
-
-extern void native_io_delay(void);
-
-extern int io_delay_type;
-extern void io_delay_init(void);
-
-#if defined(CONFIG_PARAVIRT)
-#include <asm/paravirt.h>
-#else
-
-static inline void slow_down_io(void)
-{
-	native_io_delay();
-#ifdef REALLY_SLOW_IO
-	native_io_delay();
-	native_io_delay();
-	native_io_delay();
-#endif
-}
-
-#endif
-
-#define __BUILDIO(bwl, bw, type)				\
-static inline void out##bwl(unsigned type value, int port)	\
-{								\
-	out##bwl##_local(value, port);				\
-}								\
-								\
-static inline unsigned type in##bwl(int port)			\
-{								\
-	return in##bwl##_local(port);				\
-}
-
-#define BUILDIO(bwl, bw, type)						\
-static inline void out##bwl##_local(unsigned type value, int port)	\
-{									\
-	asm volatile("out" #bwl " %" #bw "0, %w1"		\
-		     : : "a"(value), "Nd"(port));			\
-}									\
-									\
-static inline unsigned type in##bwl##_local(int port)			\
-{									\
-	unsigned type value;						\
-	asm volatile("in" #bwl " %w1, %" #bw "0"		\
-		     : "=a"(value) : "Nd"(port));			\
-	return value;							\
-}									\
-									\
-static inline void out##bwl##_local_p(unsigned type value, int port)	\
-{									\
-	out##bwl##_local(value, port);					\
-	slow_down_io();							\
-}									\
-									\
-static inline unsigned type in##bwl##_local_p(int port)			\
-{									\
-	unsigned type value = in##bwl##_local(port);			\
-	slow_down_io();							\
-	return value;							\
-}									\
-									\
-__BUILDIO(bwl, bw, type)						\
-									\
-static inline void out##bwl##_p(unsigned type value, int port)		\
-{									\
-	out##bwl(value, port);						\
-	slow_down_io();							\
-}									\
-									\
-static inline unsigned type in##bwl##_p(int port)			\
-{									\
-	unsigned type value = in##bwl(port);				\
-	slow_down_io();							\
-	return value;							\
-}									\
-									\
-static inline void outs##bwl(int port, const void *addr, unsigned long count) \
-{									\
-	asm volatile("rep; outs" #bwl					\
-		     : "+S"(addr), "+c"(count) : "d"(port));		\
-}									\
-									\
-static inline void ins##bwl(int port, void *addr, unsigned long count)	\
-{									\
-	asm volatile("rep; ins" #bwl					\
-		     : "+D"(addr), "+c"(count) : "d"(port));		\
-}
-
-BUILDIO(b, b, char)
-BUILDIO(w, w, short)
-BUILDIO(l, , int)
-
-#endif /* ASM_X86__IO_32_H */
diff --git a/include/asm-x86/io_64.h b/include/asm-x86/io_64.h
deleted file mode 100644
index ee6e086..0000000
--- a/include/asm-x86/io_64.h
+++ /dev/null
@@ -1,244 +0,0 @@
-#ifndef ASM_X86__IO_64_H
-#define ASM_X86__IO_64_H
-
-
-/*
- * This file contains the definitions for the x86 IO instructions
- * inb/inw/inl/outb/outw/outl and the "string versions" of the same
- * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
- * versions of the single-IO instructions (inb_p/inw_p/..).
- *
- * This file is not meant to be obfuscating: it's just complicated
- * to (a) handle it all in a way that makes gcc able to optimize it
- * as well as possible and (b) trying to avoid writing the same thing
- * over and over again with slight variations and possibly making a
- * mistake somewhere.
- */
-
-/*
- * Thanks to James van Artsdalen for a better timing-fix than
- * the two short jumps: using outb's to a nonexistent port seems
- * to guarantee better timings even on fast machines.
- *
- * On the other hand, I'd like to be sure of a non-existent port:
- * I feel a bit unsafe about using 0x80 (should be safe, though)
- *
- *		Linus
- */
-
- /*
-  *  Bit simplified and optimized by Jan Hubicka
-  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
-  *
-  *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
-  *  isa_read[wl] and isa_write[wl] fixed
-  *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-  */
-
-extern void native_io_delay(void);
-
-extern int io_delay_type;
-extern void io_delay_init(void);
-
-#if defined(CONFIG_PARAVIRT)
-#include <asm/paravirt.h>
-#else
-
-static inline void slow_down_io(void)
-{
-	native_io_delay();
-#ifdef REALLY_SLOW_IO
-	native_io_delay();
-	native_io_delay();
-	native_io_delay();
-#endif
-}
-#endif
-
-/*
- * Talk about misusing macros..
- */
-#define __OUT1(s, x)							\
-static inline void out##s(unsigned x value, unsigned short port) {
-
-#define __OUT2(s, s1, s2)				\
-asm volatile ("out" #s " %" s1 "0,%" s2 "1"
-
-#ifndef REALLY_SLOW_IO
-#define REALLY_SLOW_IO
-#define UNSET_REALLY_SLOW_IO
-#endif
-
-#define __OUT(s, s1, x)							\
-	__OUT1(s, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port));	\
-	}								\
-	__OUT1(s##_p, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \
-	slow_down_io();							\
-}
-
-#define __IN1(s)							\
-static inline RETURN_TYPE in##s(unsigned short port)			\
-{									\
-	RETURN_TYPE _v;
-
-#define __IN2(s, s1, s2)						\
-	asm volatile ("in" #s " %" s2 "1,%" s1 "0"
-
-#define __IN(s, s1, i...)						\
-	__IN1(s) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i);	\
-	return _v;							\
-	}								\
-	__IN1(s##_p) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i);	\
-	slow_down_io(); \
-	return _v; }
-
-#ifdef UNSET_REALLY_SLOW_IO
-#undef REALLY_SLOW_IO
-#endif
-
-#define __INS(s)							\
-static inline void ins##s(unsigned short port, void *addr,		\
-			  unsigned long count)				\
-{									\
-	asm volatile ("rep ; ins" #s					\
-		      : "=D" (addr), "=c" (count)			\
-		      : "d" (port), "0" (addr), "1" (count));		\
-}
-
-#define __OUTS(s)							\
-static inline void outs##s(unsigned short port, const void *addr,	\
-			   unsigned long count)				\
-{									\
-	asm volatile ("rep ; outs" #s					\
-		      : "=S" (addr), "=c" (count)			\
-		      : "d" (port), "0" (addr), "1" (count));		\
-}
-
-#define RETURN_TYPE unsigned char
-__IN(b, "")
-#undef RETURN_TYPE
-#define RETURN_TYPE unsigned short
-__IN(w, "")
-#undef RETURN_TYPE
-#define RETURN_TYPE unsigned int
-__IN(l, "")
-#undef RETURN_TYPE
-
-__OUT(b, "b", char)
-__OUT(w, "w", short)
-__OUT(l, , int)
-
-__INS(b)
-__INS(w)
-__INS(l)
-
-__OUTS(b)
-__OUTS(w)
-__OUTS(l)
-
-#define IO_SPACE_LIMIT 0xffff
-
-#if defined(__KERNEL__) && defined(__x86_64__)
-
-#include <linux/vmalloc.h>
-
-#ifndef __i386__
-/*
- * Change virtual addresses to physical addresses and vv.
- * These are pretty trivial
- */
-static inline unsigned long virt_to_phys(volatile void *address)
-{
-	return __pa(address);
-}
-
-static inline void *phys_to_virt(unsigned long address)
-{
-	return __va(address);
-}
-#endif
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-
-#include <asm-generic/iomap.h>
-
-/*
- * This one maps high address device memory and turns off caching for that area.
- * it's useful if some control registers are in such an area and write combining
- * or read caching is not desirable:
- */
-extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
-				unsigned long prot_val);
-
-/*
- * The default ioremap() behavior is non-cached:
- */
-static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
-{
-	return ioremap_nocache(offset, size);
-}
-
-extern void iounmap(volatile void __iomem *addr);
-
-extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
-
-/*
- * ISA I/O bus memory addresses are 1:1 with the physical address.
- */
-#define isa_virt_to_bus virt_to_phys
-#define isa_page_to_bus page_to_phys
-#define isa_bus_to_virt phys_to_virt
-
-/*
- * However PCI ones are not necessarily 1:1 and therefore these interfaces
- * are forbidden in portable PCI drivers.
- *
- * Allow them on x86 for legacy drivers, though.
- */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-void __memcpy_fromio(void *, unsigned long, unsigned);
-void __memcpy_toio(unsigned long, const void *, unsigned);
-
-static inline void memcpy_fromio(void *to, const volatile void __iomem *from,
-				 unsigned len)
-{
-	__memcpy_fromio(to, (unsigned long)from, len);
-}
-
-static inline void memcpy_toio(volatile void __iomem *to, const void *from,
-			       unsigned len)
-{
-	__memcpy_toio((unsigned long)to, from, len);
-}
-
-void memset_io(volatile void __iomem *a, int b, size_t c);
-
-/*
- * ISA space is 'always mapped' on a typical x86 system, no need to
- * explicitly ioremap() it. The fact that the ISA IO space is mapped
- * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
- * are physical addresses. The following constant pointer can be
- * used as the IO-area pointer (it can be iounmapped as well, so the
- * analogy with PCI is quite large):
- */
-#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
-
-#define flush_write_buffers()
-
-#define BIO_VMERGE_BOUNDARY iommu_bio_merge
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-#endif /* __KERNEL__ */
-
-#endif /* ASM_X86__IO_64_H */
diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h
deleted file mode 100644
index d35cbd7..0000000
--- a/include/asm-x86/io_apic.h
+++ /dev/null
@@ -1,204 +0,0 @@
-#ifndef ASM_X86__IO_APIC_H
-#define ASM_X86__IO_APIC_H
-
-#include <linux/types.h>
-#include <asm/mpspec.h>
-#include <asm/apicdef.h>
-#include <asm/irq_vectors.h>
-
-/*
- * Intel IO-APIC support for SMP and UP systems.
- *
- * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar
- */
-
-/* I/O Unit Redirection Table */
-#define IO_APIC_REDIR_VECTOR_MASK	0x000FF
-#define IO_APIC_REDIR_DEST_LOGICAL	0x00800
-#define IO_APIC_REDIR_DEST_PHYSICAL	0x00000
-#define IO_APIC_REDIR_SEND_PENDING	(1 << 12)
-#define IO_APIC_REDIR_REMOTE_IRR	(1 << 14)
-#define IO_APIC_REDIR_LEVEL_TRIGGER	(1 << 15)
-#define IO_APIC_REDIR_MASKED		(1 << 16)
-
-/*
- * The structure of the IO-APIC:
- */
-union IO_APIC_reg_00 {
-	u32	raw;
-	struct {
-		u32	__reserved_2	: 14,
-			LTS		:  1,
-			delivery_type	:  1,
-			__reserved_1	:  8,
-			ID		:  8;
-	} __attribute__ ((packed)) bits;
-};
-
-union IO_APIC_reg_01 {
-	u32	raw;
-	struct {
-		u32	version		:  8,
-			__reserved_2	:  7,
-			PRQ		:  1,
-			entries		:  8,
-			__reserved_1	:  8;
-	} __attribute__ ((packed)) bits;
-};
-
-union IO_APIC_reg_02 {
-	u32	raw;
-	struct {
-		u32	__reserved_2	: 24,
-			arbitration	:  4,
-			__reserved_1	:  4;
-	} __attribute__ ((packed)) bits;
-};
-
-union IO_APIC_reg_03 {
-	u32	raw;
-	struct {
-		u32	boot_DT		:  1,
-			__reserved_1	: 31;
-	} __attribute__ ((packed)) bits;
-};
-
-enum ioapic_irq_destination_types {
-	dest_Fixed = 0,
-	dest_LowestPrio = 1,
-	dest_SMI = 2,
-	dest__reserved_1 = 3,
-	dest_NMI = 4,
-	dest_INIT = 5,
-	dest__reserved_2 = 6,
-	dest_ExtINT = 7
-};
-
-struct IO_APIC_route_entry {
-	__u32	vector		:  8,
-		delivery_mode	:  3,	/* 000: FIXED
-					 * 001: lowest prio
-					 * 111: ExtINT
-					 */
-		dest_mode	:  1,	/* 0: physical, 1: logical */
-		delivery_status	:  1,
-		polarity	:  1,
-		irr		:  1,
-		trigger		:  1,	/* 0: edge, 1: level */
-		mask		:  1,	/* 0: enabled, 1: disabled */
-		__reserved_2	: 15;
-
-	__u32	__reserved_3	: 24,
-		dest		:  8;
-} __attribute__ ((packed));
-
-struct IR_IO_APIC_route_entry {
-	__u64	vector		: 8,
-		zero		: 3,
-		index2		: 1,
-		delivery_status : 1,
-		polarity	: 1,
-		irr		: 1,
-		trigger		: 1,
-		mask		: 1,
-		reserved	: 31,
-		format		: 1,
-		index		: 15;
-} __attribute__ ((packed));
-
-#ifdef CONFIG_X86_IO_APIC
-
-/*
- * # of IO-APICs and # of IRQ routing registers
- */
-extern int nr_ioapics;
-extern int nr_ioapic_registers[MAX_IO_APICS];
-
-/*
- * MP-BIOS irq configuration table structures:
- */
-
-#define MP_MAX_IOAPIC_PIN 127
-
-struct mp_config_ioapic {
-	unsigned long mp_apicaddr;
-	unsigned int mp_apicid;
-	unsigned char mp_type;
-	unsigned char mp_apicver;
-	unsigned char mp_flags;
-};
-
-struct mp_config_intsrc {
-	unsigned int mp_dstapic;
-	unsigned char mp_type;
-	unsigned char mp_irqtype;
-	unsigned short mp_irqflag;
-	unsigned char mp_srcbus;
-	unsigned char mp_srcbusirq;
-	unsigned char mp_dstirq;
-};
-
-/* I/O APIC entries */
-extern struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
-
-/* # of MP IRQ source entries */
-extern int mp_irq_entries;
-
-/* MP IRQ source entries */
-extern struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
-
-/* non-0 if default (table-less) MP configuration */
-extern int mpc_default_type;
-
-/* Older SiS APIC requires we rewrite the index register */
-extern int sis_apic_bug;
-
-/* 1 if "noapic" boot option passed */
-extern int skip_ioapic_setup;
-
-/* 1 if the timer IRQ uses the '8259A Virtual Wire' mode */
-extern int timer_through_8259;
-
-static inline void disable_ioapic_setup(void)
-{
-	skip_ioapic_setup = 1;
-}
-
-/*
- * If we use the IO-APIC for IRQ routing, disable automatic
- * assignment of PCI IRQ's.
- */
-#define io_apic_assign_pci_irqs \
-	(mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
-
-#ifdef CONFIG_ACPI
-extern int io_apic_get_unique_id(int ioapic, int apic_id);
-extern int io_apic_get_version(int ioapic);
-extern int io_apic_get_redir_entries(int ioapic);
-extern int io_apic_set_pci_routing(int ioapic, int pin, int irq,
-				   int edge_level, int active_high_low);
-#endif /* CONFIG_ACPI */
-
-extern int (*ioapic_renumber_irq)(int ioapic, int irq);
-extern void ioapic_init_mappings(void);
-
-#ifdef CONFIG_X86_64
-extern int save_mask_IO_APIC_setup(void);
-extern void restore_IO_APIC_setup(void);
-extern void reinit_intr_remapped_IO_APIC(int);
-#endif
-
-extern int probe_nr_irqs(void);
-
-#else  /* !CONFIG_X86_IO_APIC */
-#define io_apic_assign_pci_irqs 0
-static const int timer_through_8259 = 0;
-static inline void ioapic_init_mappings(void) { }
-
-static inline int probe_nr_irqs(void)
-{
-	return NR_IRQS;
-}
-#endif
-
-#endif /* ASM_X86__IO_APIC_H */
diff --git a/include/asm-x86/ioctls.h b/include/asm-x86/ioctls.h
deleted file mode 100644
index 06752a6..0000000
--- a/include/asm-x86/ioctls.h
+++ /dev/null
@@ -1,94 +0,0 @@
-#ifndef ASM_X86__IOCTLS_H
-#define ASM_X86__IOCTLS_H
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T', 0x2A, struct termios2)
-#define TCSETS2		_IOW('T', 0x2B, struct termios2)
-#define TCSETSW2	_IOW('T', 0x2C, struct termios2)
-#define TCSETSF2	_IOW('T', 0x2D, struct termios2)
-#define TIOCGRS485	0x542E
-#define TIOCSRS485	0x542F
-#define TIOCGPTN	_IOR('T', 0x30, unsigned int)
-				/* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
-#define TCGETX		0x5432 /* SYS5 TCGETX compatibility */
-#define TCSETX		0x5433
-#define TCSETXF		0x5434
-#define TCSETXW		0x5435
-
-#define FIONCLEX	0x5450
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
-#define FIOQSIZE	0x5460
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
-
-#endif /* ASM_X86__IOCTLS_H */
diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h
deleted file mode 100644
index 961e746..0000000
--- a/include/asm-x86/iommu.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef ASM_X86__IOMMU_H
-#define ASM_X86__IOMMU_H
-
-extern void pci_iommu_shutdown(void);
-extern void no_iommu_init(void);
-extern struct dma_mapping_ops nommu_dma_ops;
-extern int force_iommu, no_iommu;
-extern int iommu_detected;
-extern int dmar_disabled;
-
-extern unsigned long iommu_nr_pages(unsigned long addr, unsigned long len);
-
-#ifdef CONFIG_GART_IOMMU
-extern int gart_iommu_aperture;
-extern int gart_iommu_aperture_allowed;
-extern int gart_iommu_aperture_disabled;
-
-extern void early_gart_iommu_check(void);
-extern void gart_iommu_init(void);
-extern void gart_iommu_shutdown(void);
-extern void __init gart_parse_options(char *);
-extern void gart_iommu_hole_init(void);
-
-#else
-#define gart_iommu_aperture            0
-#define gart_iommu_aperture_allowed    0
-#define gart_iommu_aperture_disabled   1
-
-static inline void early_gart_iommu_check(void)
-{
-}
-static inline void gart_iommu_init(void)
-{
-}
-static inline void gart_iommu_shutdown(void)
-{
-}
-static inline void gart_parse_options(char *options)
-{
-}
-static inline void gart_iommu_hole_init(void)
-{
-}
-#endif
-
-#endif /* ASM_X86__IOMMU_H */
diff --git a/include/asm-x86/ipcbuf.h b/include/asm-x86/ipcbuf.h
deleted file mode 100644
index 910304f..0000000
--- a/include/asm-x86/ipcbuf.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef ASM_X86__IPCBUF_H
-#define ASM_X86__IPCBUF_H
-
-/*
- * The ipc64_perm structure for x86 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm {
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* ASM_X86__IPCBUF_H */
diff --git a/include/asm-x86/ipi.h b/include/asm-x86/ipi.h
deleted file mode 100644
index 30a692c..0000000
--- a/include/asm-x86/ipi.h
+++ /dev/null
@@ -1,138 +0,0 @@
-#ifndef ASM_X86__IPI_H
-#define ASM_X86__IPI_H
-
-/*
- * Copyright 2004 James Cleverdon, IBM.
- * Subject to the GNU Public License, v.2
- *
- * Generic APIC InterProcessor Interrupt code.
- *
- * Moved to include file by James Cleverdon from
- * arch/x86-64/kernel/smp.c
- *
- * Copyrights from kernel/smp.c:
- *
- * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
- * (c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
- * (c) 2002,2003 Andi Kleen, SuSE Labs.
- * Subject to the GNU Public License, v.2
- */
-
-#include <asm/hw_irq.h>
-#include <asm/apic.h>
-#include <asm/smp.h>
-
-/*
- * the following functions deal with sending IPIs between CPUs.
- *
- * We use 'broadcast', CPU->CPU IPIs and self-IPIs too.
- */
-
-static inline unsigned int __prepare_ICR(unsigned int shortcut, int vector,
-					 unsigned int dest)
-{
-	unsigned int icr = shortcut | dest;
-
-	switch (vector) {
-	default:
-		icr |= APIC_DM_FIXED | vector;
-		break;
-	case NMI_VECTOR:
-		icr |= APIC_DM_NMI;
-		break;
-	}
-	return icr;
-}
-
-static inline int __prepare_ICR2(unsigned int mask)
-{
-	return SET_APIC_DEST_FIELD(mask);
-}
-
-static inline void __xapic_wait_icr_idle(void)
-{
-	while (native_apic_mem_read(APIC_ICR) & APIC_ICR_BUSY)
-		cpu_relax();
-}
-
-static inline void __send_IPI_shortcut(unsigned int shortcut, int vector,
-				       unsigned int dest)
-{
-	/*
-	 * Subtle. In the case of the 'never do double writes' workaround
-	 * we have to lock out interrupts to be safe.  As we don't care
-	 * of the value read we use an atomic rmw access to avoid costly
-	 * cli/sti.  Otherwise we use an even cheaper single atomic write
-	 * to the APIC.
-	 */
-	unsigned int cfg;
-
-	/*
-	 * Wait for idle.
-	 */
-	__xapic_wait_icr_idle();
-
-	/*
-	 * No need to touch the target chip field
-	 */
-	cfg = __prepare_ICR(shortcut, vector, dest);
-
-	/*
-	 * Send the IPI. The write to APIC_ICR fires this off.
-	 */
-	native_apic_mem_write(APIC_ICR, cfg);
-}
-
-/*
- * This is used to send an IPI with no shorthand notation (the destination is
- * specified in bits 56 to 63 of the ICR).
- */
-static inline void __send_IPI_dest_field(unsigned int mask, int vector,
-					 unsigned int dest)
-{
-	unsigned long cfg;
-
-	/*
-	 * Wait for idle.
-	 */
-	if (unlikely(vector == NMI_VECTOR))
-		safe_apic_wait_icr_idle();
-	else
-		__xapic_wait_icr_idle();
-
-	/*
-	 * prepare target chip field
-	 */
-	cfg = __prepare_ICR2(mask);
-	native_apic_mem_write(APIC_ICR2, cfg);
-
-	/*
-	 * program the ICR
-	 */
-	cfg = __prepare_ICR(0, vector, dest);
-
-	/*
-	 * Send the IPI. The write to APIC_ICR fires this off.
-	 */
-	native_apic_mem_write(APIC_ICR, cfg);
-}
-
-static inline void send_IPI_mask_sequence(cpumask_t mask, int vector)
-{
-	unsigned long flags;
-	unsigned long query_cpu;
-
-	/*
-	 * Hack. The clustered APIC addressing mode doesn't allow us to send
-	 * to an arbitrary mask, so I do a unicast to each CPU instead.
-	 * - mbligh
-	 */
-	local_irq_save(flags);
-	for_each_cpu_mask_nr(query_cpu, mask) {
-		__send_IPI_dest_field(per_cpu(x86_cpu_to_apicid, query_cpu),
-				      vector, APIC_DEST_PHYSICAL);
-	}
-	local_irq_restore(flags);
-}
-
-#endif /* ASM_X86__IPI_H */
diff --git a/include/asm-x86/irq.h b/include/asm-x86/irq.h
deleted file mode 100644
index 1e5f290..0000000
--- a/include/asm-x86/irq.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef ASM_X86__IRQ_H
-#define ASM_X86__IRQ_H
-/*
- *	(C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
- *
- *	IRQ/IPI changes taken from work by Thomas Radke
- *	<tomsoft@informatik.tu-chemnitz.de>
- */
-
-#include <asm/apicdef.h>
-#include <asm/irq_vectors.h>
-
-static inline int irq_canonicalize(int irq)
-{
-	return ((irq == 2) ? 9 : irq);
-}
-
-#ifdef CONFIG_X86_LOCAL_APIC
-# define ARCH_HAS_NMI_WATCHDOG
-#endif
-
-#ifdef CONFIG_4KSTACKS
-  extern void irq_ctx_init(int cpu);
-  extern void irq_ctx_exit(int cpu);
-# define __ARCH_HAS_DO_SOFTIRQ
-#else
-# define irq_ctx_init(cpu) do { } while (0)
-# define irq_ctx_exit(cpu) do { } while (0)
-# ifdef CONFIG_X86_64
-#  define __ARCH_HAS_DO_SOFTIRQ
-# endif
-#endif
-
-#ifdef CONFIG_IRQBALANCE
-extern int irqbalance_disable(char *str);
-#endif
-
-#ifdef CONFIG_HOTPLUG_CPU
-#include <linux/cpumask.h>
-extern void fixup_irqs(cpumask_t map);
-#endif
-
-extern unsigned int do_IRQ(struct pt_regs *regs);
-extern void init_IRQ(void);
-extern void native_init_IRQ(void);
-
-/* Interrupt vector management */
-extern DECLARE_BITMAP(used_vectors, NR_VECTORS);
-
-#endif /* ASM_X86__IRQ_H */
diff --git a/include/asm-x86/irq_regs_32.h b/include/asm-x86/irq_regs_32.h
deleted file mode 100644
index 316a3b2..0000000
--- a/include/asm-x86/irq_regs_32.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Per-cpu current frame pointer - the location of the last exception frame on
- * the stack, stored in the per-cpu area.
- *
- * Jeremy Fitzhardinge <jeremy@goop.org>
- */
-#ifndef ASM_X86__IRQ_REGS_32_H
-#define ASM_X86__IRQ_REGS_32_H
-
-#include <asm/percpu.h>
-
-DECLARE_PER_CPU(struct pt_regs *, irq_regs);
-
-static inline struct pt_regs *get_irq_regs(void)
-{
-	return x86_read_percpu(irq_regs);
-}
-
-static inline struct pt_regs *set_irq_regs(struct pt_regs *new_regs)
-{
-	struct pt_regs *old_regs;
-
-	old_regs = get_irq_regs();
-	x86_write_percpu(irq_regs, new_regs);
-
-	return old_regs;
-}
-
-#endif /* ASM_X86__IRQ_REGS_32_H */
diff --git a/include/asm-x86/irq_remapping.h b/include/asm-x86/irq_remapping.h
deleted file mode 100644
index 78242c6..0000000
--- a/include/asm-x86/irq_remapping.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _ASM_IRQ_REMAPPING_H
-#define _ASM_IRQ_REMAPPING_H
-
-extern int x2apic;
-
-#define IRTE_DEST(dest) ((x2apic) ? dest : dest << 8)
-
-#endif
diff --git a/include/asm-x86/irq_vectors.h b/include/asm-x86/irq_vectors.h
deleted file mode 100644
index a8d065d..0000000
--- a/include/asm-x86/irq_vectors.h
+++ /dev/null
@@ -1,164 +0,0 @@
-#ifndef ASM_X86__IRQ_VECTORS_H
-#define ASM_X86__IRQ_VECTORS_H
-
-#include <linux/threads.h>
-
-#define NMI_VECTOR		0x02
-
-/*
- * IDT vectors usable for external interrupt sources start
- * at 0x20:
- */
-#define FIRST_EXTERNAL_VECTOR	0x20
-
-#ifdef CONFIG_X86_32
-# define SYSCALL_VECTOR		0x80
-#else
-# define IA32_SYSCALL_VECTOR	0x80
-#endif
-
-/*
- * Reserve the lowest usable priority level 0x20 - 0x2f for triggering
- * cleanup after irq migration.
- */
-#define IRQ_MOVE_CLEANUP_VECTOR	FIRST_EXTERNAL_VECTOR
-
-/*
- * Vectors 0x30-0x3f are used for ISA interrupts.
- */
-#define IRQ0_VECTOR		(FIRST_EXTERNAL_VECTOR + 0x10)
-#define IRQ1_VECTOR		(IRQ0_VECTOR + 1)
-#define IRQ2_VECTOR		(IRQ0_VECTOR + 2)
-#define IRQ3_VECTOR		(IRQ0_VECTOR + 3)
-#define IRQ4_VECTOR		(IRQ0_VECTOR + 4)
-#define IRQ5_VECTOR		(IRQ0_VECTOR + 5)
-#define IRQ6_VECTOR		(IRQ0_VECTOR + 6)
-#define IRQ7_VECTOR		(IRQ0_VECTOR + 7)
-#define IRQ8_VECTOR		(IRQ0_VECTOR + 8)
-#define IRQ9_VECTOR		(IRQ0_VECTOR + 9)
-#define IRQ10_VECTOR		(IRQ0_VECTOR + 10)
-#define IRQ11_VECTOR		(IRQ0_VECTOR + 11)
-#define IRQ12_VECTOR		(IRQ0_VECTOR + 12)
-#define IRQ13_VECTOR		(IRQ0_VECTOR + 13)
-#define IRQ14_VECTOR		(IRQ0_VECTOR + 14)
-#define IRQ15_VECTOR		(IRQ0_VECTOR + 15)
-
-/*
- * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
- *
- *  some of the following vectors are 'rare', they are merged
- *  into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
- *  TLB, reschedule and local APIC vectors are performance-critical.
- *
- *  Vectors 0xf0-0xfa are free (reserved for future Linux use).
- */
-#ifdef CONFIG_X86_32
-
-# define SPURIOUS_APIC_VECTOR		0xff
-# define ERROR_APIC_VECTOR		0xfe
-# define INVALIDATE_TLB_VECTOR		0xfd
-# define RESCHEDULE_VECTOR		0xfc
-# define CALL_FUNCTION_VECTOR		0xfb
-# define CALL_FUNCTION_SINGLE_VECTOR	0xfa
-# define THERMAL_APIC_VECTOR		0xf0
-
-#else
-
-#define SPURIOUS_APIC_VECTOR		0xff
-#define ERROR_APIC_VECTOR		0xfe
-#define RESCHEDULE_VECTOR		0xfd
-#define CALL_FUNCTION_VECTOR		0xfc
-#define CALL_FUNCTION_SINGLE_VECTOR	0xfb
-#define THERMAL_APIC_VECTOR		0xfa
-#define THRESHOLD_APIC_VECTOR		0xf9
-#define UV_BAU_MESSAGE			0xf8
-#define INVALIDATE_TLB_VECTOR_END	0xf7
-#define INVALIDATE_TLB_VECTOR_START	0xf0	/* f0-f7 used for TLB flush */
-
-#define NUM_INVALIDATE_TLB_VECTORS	8
-
-#endif
-
-/*
- * Local APIC timer IRQ vector is on a different priority level,
- * to work around the 'lost local interrupt if more than 2 IRQ
- * sources per level' errata.
- */
-#define LOCAL_TIMER_VECTOR	0xef
-
-/*
- * First APIC vector available to drivers: (vectors 0x30-0xee) we
- * start at 0x31(0x41) to spread out vectors evenly between priority
- * levels. (0x80 is the syscall vector)
- */
-#define FIRST_DEVICE_VECTOR	(IRQ15_VECTOR + 2)
-
-#define NR_VECTORS		256
-
-#define FPU_IRQ			13
-
-#define	FIRST_VM86_IRQ		3
-#define LAST_VM86_IRQ		15
-#define invalid_vm86_irq(irq)	((irq) < 3 || (irq) > 15)
-
-#ifdef CONFIG_X86_64
-# if NR_CPUS < MAX_IO_APICS
-#  define NR_IRQS (NR_VECTORS + (32 * NR_CPUS))
-# else
-#  define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS))
-# endif
-
-#elif !defined(CONFIG_X86_VOYAGER)
-
-# if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT) || defined(CONFIG_X86_VISWS)
-
-#  define NR_IRQS		224
-
-# else /* IO_APIC || PARAVIRT */
-
-#  define NR_IRQS		16
-
-# endif
-
-#else /* !VISWS && !VOYAGER */
-
-# define NR_IRQS		224
-
-#endif /* VISWS */
-
-/* Voyager specific defines */
-/* These define the CPIs we use in linux */
-#define VIC_CPI_LEVEL0			0
-#define VIC_CPI_LEVEL1			1
-/* now the fake CPIs */
-#define VIC_TIMER_CPI			2
-#define VIC_INVALIDATE_CPI		3
-#define VIC_RESCHEDULE_CPI		4
-#define VIC_ENABLE_IRQ_CPI		5
-#define VIC_CALL_FUNCTION_CPI		6
-#define VIC_CALL_FUNCTION_SINGLE_CPI	7
-
-/* Now the QIC CPIs:  Since we don't need the two initial levels,
- * these are 2 less than the VIC CPIs */
-#define QIC_CPI_OFFSET			1
-#define QIC_TIMER_CPI			(VIC_TIMER_CPI - QIC_CPI_OFFSET)
-#define QIC_INVALIDATE_CPI		(VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
-#define QIC_RESCHEDULE_CPI		(VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
-#define QIC_ENABLE_IRQ_CPI		(VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_CPI		(VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_SINGLE_CPI	(VIC_CALL_FUNCTION_SINGLE_CPI - QIC_CPI_OFFSET)
-
-#define VIC_START_FAKE_CPI		VIC_TIMER_CPI
-#define VIC_END_FAKE_CPI		VIC_CALL_FUNCTION_SINGLE_CPI
-
-/* this is the SYS_INT CPI. */
-#define VIC_SYS_INT			8
-#define VIC_CMN_INT			15
-
-/* This is the boot CPI for alternate processors.  It gets overwritten
- * by the above once the system has activated all available processors */
-#define VIC_CPU_BOOT_CPI		VIC_CPI_LEVEL0
-#define VIC_CPU_BOOT_ERRATA_CPI		(VIC_CPI_LEVEL0 + 8)
-
-
-#endif /* ASM_X86__IRQ_VECTORS_H */
diff --git a/include/asm-x86/ist.h b/include/asm-x86/ist.h
deleted file mode 100644
index 35a2fe9..0000000
--- a/include/asm-x86/ist.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef ASM_X86__IST_H
-#define ASM_X86__IST_H
-
-/*
- * Include file for the interface to IST BIOS
- * Copyright 2002 Andy Grover <andrew.grover@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-
-#include <linux/types.h>
-
-struct ist_info {
-	__u32 signature;
-	__u32 command;
-	__u32 event;
-	__u32 perf_level;
-};
-
-#ifdef __KERNEL__
-
-extern struct ist_info ist_info;
-
-#endif	/* __KERNEL__ */
-#endif /* ASM_X86__IST_H */
diff --git a/include/asm-x86/k8.h b/include/asm-x86/k8.h
deleted file mode 100644
index 2bbaf43..0000000
--- a/include/asm-x86/k8.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef ASM_X86__K8_H
-#define ASM_X86__K8_H
-
-#include <linux/pci.h>
-
-extern struct pci_device_id k8_nb_ids[];
-
-extern int early_is_k8_nb(u32 value);
-extern struct pci_dev **k8_northbridges;
-extern int num_k8_northbridges;
-extern int cache_k8_northbridges(void);
-extern void k8_flush_garts(void);
-extern int k8_scan_nodes(unsigned long start, unsigned long end);
-
-#endif /* ASM_X86__K8_H */
diff --git a/include/asm-x86/kdebug.h b/include/asm-x86/kdebug.h
deleted file mode 100644
index fbbab66..0000000
--- a/include/asm-x86/kdebug.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef ASM_X86__KDEBUG_H
-#define ASM_X86__KDEBUG_H
-
-#include <linux/notifier.h>
-
-struct pt_regs;
-
-/* Grossly misnamed. */
-enum die_val {
-	DIE_OOPS = 1,
-	DIE_INT3,
-	DIE_DEBUG,
-	DIE_PANIC,
-	DIE_NMI,
-	DIE_DIE,
-	DIE_NMIWATCHDOG,
-	DIE_KERNELDEBUG,
-	DIE_TRAP,
-	DIE_GPF,
-	DIE_CALL,
-	DIE_NMI_IPI,
-	DIE_PAGE_FAULT,
-	DIE_NMIUNKNOWN,
-};
-
-extern void printk_address(unsigned long address, int reliable);
-extern void die(const char *, struct pt_regs *,long);
-extern int __must_check __die(const char *, struct pt_regs *, long);
-extern void show_registers(struct pt_regs *regs);
-extern void show_trace(struct task_struct *t, struct pt_regs *regs,
-		       unsigned long *sp, unsigned long bp);
-extern void __show_regs(struct pt_regs *regs, int all);
-extern void show_regs(struct pt_regs *regs);
-extern unsigned long oops_begin(void);
-extern void oops_end(unsigned long, struct pt_regs *, int signr);
-
-#endif /* ASM_X86__KDEBUG_H */
diff --git a/include/asm-x86/kexec.h b/include/asm-x86/kexec.h
deleted file mode 100644
index ea09600..0000000
--- a/include/asm-x86/kexec.h
+++ /dev/null
@@ -1,175 +0,0 @@
-#ifndef ASM_X86__KEXEC_H
-#define ASM_X86__KEXEC_H
-
-#ifdef CONFIG_X86_32
-# define PA_CONTROL_PAGE	0
-# define VA_CONTROL_PAGE	1
-# define PA_PGD			2
-# define VA_PGD			3
-# define PA_PTE_0		4
-# define VA_PTE_0		5
-# define PA_PTE_1		6
-# define VA_PTE_1		7
-# define PA_SWAP_PAGE		8
-# ifdef CONFIG_X86_PAE
-#  define PA_PMD_0		9
-#  define VA_PMD_0		10
-#  define PA_PMD_1		11
-#  define VA_PMD_1		12
-#  define PAGES_NR		13
-# else
-#  define PAGES_NR		9
-# endif
-#else
-# define PA_CONTROL_PAGE	0
-# define VA_CONTROL_PAGE	1
-# define PA_PGD			2
-# define VA_PGD			3
-# define PA_PUD_0		4
-# define VA_PUD_0		5
-# define PA_PMD_0		6
-# define VA_PMD_0		7
-# define PA_PTE_0		8
-# define VA_PTE_0		9
-# define PA_PUD_1		10
-# define VA_PUD_1		11
-# define PA_PMD_1		12
-# define VA_PMD_1		13
-# define PA_PTE_1		14
-# define VA_PTE_1		15
-# define PA_TABLE_PAGE		16
-# define PAGES_NR		17
-#endif
-
-#ifdef CONFIG_X86_32
-# define KEXEC_CONTROL_CODE_MAX_SIZE	2048
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <linux/string.h>
-
-#include <asm/page.h>
-#include <asm/ptrace.h>
-
-/*
- * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
- * I.e. Maximum page that is mapped directly into kernel memory,
- * and kmap is not required.
- *
- * So far x86_64 is limited to 40 physical address bits.
- */
-#ifdef CONFIG_X86_32
-/* Maximum physical address we can use pages from */
-# define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
-/* Maximum address we can reach in physical address mode */
-# define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
-/* Maximum address we can use for the control code buffer */
-# define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-
-# define KEXEC_CONTROL_PAGE_SIZE	4096
-
-/* The native architecture */
-# define KEXEC_ARCH KEXEC_ARCH_386
-
-/* We can also handle crash dumps from 64 bit kernel. */
-# define vmcore_elf_check_arch_cross(x) ((x)->e_machine == EM_X86_64)
-#else
-/* Maximum physical address we can use pages from */
-# define KEXEC_SOURCE_MEMORY_LIMIT      (0xFFFFFFFFFFUL)
-/* Maximum address we can reach in physical address mode */
-# define KEXEC_DESTINATION_MEMORY_LIMIT (0xFFFFFFFFFFUL)
-/* Maximum address we can use for the control pages */
-# define KEXEC_CONTROL_MEMORY_LIMIT     (0xFFFFFFFFFFUL)
-
-/* Allocate one page for the pdp and the second for the code */
-# define KEXEC_CONTROL_PAGE_SIZE  (4096UL + 4096UL)
-
-/* The native architecture */
-# define KEXEC_ARCH KEXEC_ARCH_X86_64
-#endif
-
-/*
- * CPU does not save ss and sp on stack if execution is already
- * running in kernel mode at the time of NMI occurrence. This code
- * fixes it.
- */
-static inline void crash_fixup_ss_esp(struct pt_regs *newregs,
-				      struct pt_regs *oldregs)
-{
-#ifdef CONFIG_X86_32
-	newregs->sp = (unsigned long)&(oldregs->sp);
-	asm volatile("xorl %%eax, %%eax\n\t"
-		     "movw %%ss, %%ax\n\t"
-		     :"=a"(newregs->ss));
-#endif
-}
-
-/*
- * This function is responsible for capturing register states if coming
- * via panic otherwise just fix up the ss and sp if coming via kernel
- * mode exception.
- */
-static inline void crash_setup_regs(struct pt_regs *newregs,
-				    struct pt_regs *oldregs)
-{
-	if (oldregs) {
-		memcpy(newregs, oldregs, sizeof(*newregs));
-		crash_fixup_ss_esp(newregs, oldregs);
-	} else {
-#ifdef CONFIG_X86_32
-		asm volatile("movl %%ebx,%0" : "=m"(newregs->bx));
-		asm volatile("movl %%ecx,%0" : "=m"(newregs->cx));
-		asm volatile("movl %%edx,%0" : "=m"(newregs->dx));
-		asm volatile("movl %%esi,%0" : "=m"(newregs->si));
-		asm volatile("movl %%edi,%0" : "=m"(newregs->di));
-		asm volatile("movl %%ebp,%0" : "=m"(newregs->bp));
-		asm volatile("movl %%eax,%0" : "=m"(newregs->ax));
-		asm volatile("movl %%esp,%0" : "=m"(newregs->sp));
-		asm volatile("movl %%ss, %%eax;" :"=a"(newregs->ss));
-		asm volatile("movl %%cs, %%eax;" :"=a"(newregs->cs));
-		asm volatile("movl %%ds, %%eax;" :"=a"(newregs->ds));
-		asm volatile("movl %%es, %%eax;" :"=a"(newregs->es));
-		asm volatile("pushfl; popl %0" :"=m"(newregs->flags));
-#else
-		asm volatile("movq %%rbx,%0" : "=m"(newregs->bx));
-		asm volatile("movq %%rcx,%0" : "=m"(newregs->cx));
-		asm volatile("movq %%rdx,%0" : "=m"(newregs->dx));
-		asm volatile("movq %%rsi,%0" : "=m"(newregs->si));
-		asm volatile("movq %%rdi,%0" : "=m"(newregs->di));
-		asm volatile("movq %%rbp,%0" : "=m"(newregs->bp));
-		asm volatile("movq %%rax,%0" : "=m"(newregs->ax));
-		asm volatile("movq %%rsp,%0" : "=m"(newregs->sp));
-		asm volatile("movq %%r8,%0" : "=m"(newregs->r8));
-		asm volatile("movq %%r9,%0" : "=m"(newregs->r9));
-		asm volatile("movq %%r10,%0" : "=m"(newregs->r10));
-		asm volatile("movq %%r11,%0" : "=m"(newregs->r11));
-		asm volatile("movq %%r12,%0" : "=m"(newregs->r12));
-		asm volatile("movq %%r13,%0" : "=m"(newregs->r13));
-		asm volatile("movq %%r14,%0" : "=m"(newregs->r14));
-		asm volatile("movq %%r15,%0" : "=m"(newregs->r15));
-		asm volatile("movl %%ss, %%eax;" :"=a"(newregs->ss));
-		asm volatile("movl %%cs, %%eax;" :"=a"(newregs->cs));
-		asm volatile("pushfq; popq %0" :"=m"(newregs->flags));
-#endif
-		newregs->ip = (unsigned long)current_text_addr();
-	}
-}
-
-#ifdef CONFIG_X86_32
-asmlinkage unsigned long
-relocate_kernel(unsigned long indirection_page,
-		unsigned long control_page,
-		unsigned long start_address,
-		unsigned int has_pae,
-		unsigned int preserve_context);
-#else
-NORET_TYPE void
-relocate_kernel(unsigned long indirection_page,
-		unsigned long page_list,
-		unsigned long start_address) ATTRIB_NORET;
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* ASM_X86__KEXEC_H */
diff --git a/include/asm-x86/kgdb.h b/include/asm-x86/kgdb.h
deleted file mode 100644
index d283863..0000000
--- a/include/asm-x86/kgdb.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef ASM_X86__KGDB_H
-#define ASM_X86__KGDB_H
-
-/*
- * Copyright (C) 2001-2004 Amit S. Kale
- * Copyright (C) 2008 Wind River Systems, Inc.
- */
-
-/*
- * BUFMAX defines the maximum number of characters in inbound/outbound
- * buffers at least NUMREGBYTES*2 are needed for register packets
- * Longer buffer is needed to list all threads
- */
-#define BUFMAX			1024
-
-/*
- *  Note that this register image is in a different order than
- *  the register image that Linux produces at interrupt time.
- *
- *  Linux's register image is defined by struct pt_regs in ptrace.h.
- *  Just why GDB uses a different order is a historical mystery.
- */
-#ifdef CONFIG_X86_32
-enum regnames {
-	GDB_AX,			/* 0 */
-	GDB_CX,			/* 1 */
-	GDB_DX,			/* 2 */
-	GDB_BX,			/* 3 */
-	GDB_SP,			/* 4 */
-	GDB_BP,			/* 5 */
-	GDB_SI,			/* 6 */
-	GDB_DI,			/* 7 */
-	GDB_PC,			/* 8 also known as eip */
-	GDB_PS,			/* 9 also known as eflags */
-	GDB_CS,			/* 10 */
-	GDB_SS,			/* 11 */
-	GDB_DS,			/* 12 */
-	GDB_ES,			/* 13 */
-	GDB_FS,			/* 14 */
-	GDB_GS,			/* 15 */
-};
-#define NUMREGBYTES		((GDB_GS+1)*4)
-#else /* ! CONFIG_X86_32 */
-enum regnames64 {
-	GDB_AX,			/* 0 */
-	GDB_BX,			/* 1 */
-	GDB_CX,			/* 2 */
-	GDB_DX,			/* 3 */
-	GDB_SI,			/* 4 */
-	GDB_DI,			/* 5 */
-	GDB_BP,			/* 6 */
-	GDB_SP,			/* 7 */
-	GDB_R8,			/* 8 */
-	GDB_R9,			/* 9 */
-	GDB_R10,		/* 10 */
-	GDB_R11,		/* 11 */
-	GDB_R12,		/* 12 */
-	GDB_R13,		/* 13 */
-	GDB_R14,		/* 14 */
-	GDB_R15,		/* 15 */
-	GDB_PC,			/* 16 */
-};
-
-enum regnames32 {
-	GDB_PS = 34,
-	GDB_CS,
-	GDB_SS,
-};
-#define NUMREGBYTES		((GDB_SS+1)*4)
-#endif /* CONFIG_X86_32 */
-
-static inline void arch_kgdb_breakpoint(void)
-{
-	asm("   int $3");
-}
-#define BREAK_INSTR_SIZE	1
-#define CACHE_FLUSH_IS_SAFE	1
-
-#endif /* ASM_X86__KGDB_H */
diff --git a/include/asm-x86/kmap_types.h b/include/asm-x86/kmap_types.h
deleted file mode 100644
index 89f4449..0000000
--- a/include/asm-x86/kmap_types.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef ASM_X86__KMAP_TYPES_H
-#define ASM_X86__KMAP_TYPES_H
-
-#if defined(CONFIG_X86_32) && defined(CONFIG_DEBUG_HIGHMEM)
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
-#endif
-
-enum km_type {
-D(0)	KM_BOUNCE_READ,
-D(1)	KM_SKB_SUNRPC_DATA,
-D(2)	KM_SKB_DATA_SOFTIRQ,
-D(3)	KM_USER0,
-D(4)	KM_USER1,
-D(5)	KM_BIO_SRC_IRQ,
-D(6)	KM_BIO_DST_IRQ,
-D(7)	KM_PTE0,
-D(8)	KM_PTE1,
-D(9)	KM_IRQ0,
-D(10)	KM_IRQ1,
-D(11)	KM_SOFTIRQ0,
-D(12)	KM_SOFTIRQ1,
-D(13)	KM_TYPE_NR
-};
-
-#undef D
-
-#endif /* ASM_X86__KMAP_TYPES_H */
diff --git a/include/asm-x86/kprobes.h b/include/asm-x86/kprobes.h
deleted file mode 100644
index 8a0748d..0000000
--- a/include/asm-x86/kprobes.h
+++ /dev/null
@@ -1,88 +0,0 @@
-#ifndef ASM_X86__KPROBES_H
-#define ASM_X86__KPROBES_H
-/*
- *  Kernel Probes (KProbes)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2002, 2004
- *
- * See arch/x86/kernel/kprobes.c for x86 kprobes history.
- */
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/percpu.h>
-
-#define  __ARCH_WANT_KPROBES_INSN_SLOT
-
-struct pt_regs;
-struct kprobe;
-
-typedef u8 kprobe_opcode_t;
-#define BREAKPOINT_INSTRUCTION	0xcc
-#define RELATIVEJUMP_INSTRUCTION 0xe9
-#define MAX_INSN_SIZE 16
-#define MAX_STACK_SIZE 64
-#define MIN_STACK_SIZE(ADDR)					       \
-	(((MAX_STACK_SIZE) < (((unsigned long)current_thread_info()) + \
-			      THREAD_SIZE - (unsigned long)(ADDR)))    \
-	 ? (MAX_STACK_SIZE)					       \
-	 : (((unsigned long)current_thread_info()) +		       \
-	    THREAD_SIZE - (unsigned long)(ADDR)))
-
-#define flush_insn_slot(p)	do { } while (0)
-
-extern const int kretprobe_blacklist_size;
-
-void arch_remove_kprobe(struct kprobe *p);
-void kretprobe_trampoline(void);
-
-/* Architecture specific copy of original instruction*/
-struct arch_specific_insn {
-	/* copy of the original instruction */
-	kprobe_opcode_t *insn;
-	/*
-	 * boostable = -1: This instruction type is not boostable.
-	 * boostable = 0: This instruction type is boostable.
-	 * boostable = 1: This instruction has been boosted: we have
-	 * added a relative jump after the instruction copy in insn,
-	 * so no single-step and fixup are needed (unless there's
-	 * a post_handler or break_handler).
-	 */
-	int boostable;
-};
-
-struct prev_kprobe {
-	struct kprobe *kp;
-	unsigned long status;
-	unsigned long old_flags;
-	unsigned long saved_flags;
-};
-
-/* per-cpu kprobe control block */
-struct kprobe_ctlblk {
-	unsigned long kprobe_status;
-	unsigned long kprobe_old_flags;
-	unsigned long kprobe_saved_flags;
-	unsigned long *jprobe_saved_sp;
-	struct pt_regs jprobe_saved_regs;
-	kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
-	struct prev_kprobe prev_kprobe;
-};
-
-extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
-extern int kprobe_exceptions_notify(struct notifier_block *self,
-				    unsigned long val, void *data);
-#endif /* ASM_X86__KPROBES_H */
diff --git a/include/asm-x86/kvm.h b/include/asm-x86/kvm.h
deleted file mode 100644
index ba0dd79..0000000
--- a/include/asm-x86/kvm.h
+++ /dev/null
@@ -1,211 +0,0 @@
-#ifndef ASM_X86__KVM_H
-#define ASM_X86__KVM_H
-
-/*
- * KVM x86 specific structures and definitions
- *
- */
-
-#include <asm/types.h>
-#include <linux/ioctl.h>
-
-/* Architectural interrupt line count. */
-#define KVM_NR_INTERRUPTS 256
-
-struct kvm_memory_alias {
-	__u32 slot;  /* this has a different namespace than memory slots */
-	__u32 flags;
-	__u64 guest_phys_addr;
-	__u64 memory_size;
-	__u64 target_phys_addr;
-};
-
-/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */
-struct kvm_pic_state {
-	__u8 last_irr;	/* edge detection */
-	__u8 irr;		/* interrupt request register */
-	__u8 imr;		/* interrupt mask register */
-	__u8 isr;		/* interrupt service register */
-	__u8 priority_add;	/* highest irq priority */
-	__u8 irq_base;
-	__u8 read_reg_select;
-	__u8 poll;
-	__u8 special_mask;
-	__u8 init_state;
-	__u8 auto_eoi;
-	__u8 rotate_on_auto_eoi;
-	__u8 special_fully_nested_mode;
-	__u8 init4;		/* true if 4 byte init */
-	__u8 elcr;		/* PIIX edge/trigger selection */
-	__u8 elcr_mask;
-};
-
-#define KVM_IOAPIC_NUM_PINS  24
-struct kvm_ioapic_state {
-	__u64 base_address;
-	__u32 ioregsel;
-	__u32 id;
-	__u32 irr;
-	__u32 pad;
-	union {
-		__u64 bits;
-		struct {
-			__u8 vector;
-			__u8 delivery_mode:3;
-			__u8 dest_mode:1;
-			__u8 delivery_status:1;
-			__u8 polarity:1;
-			__u8 remote_irr:1;
-			__u8 trig_mode:1;
-			__u8 mask:1;
-			__u8 reserve:7;
-			__u8 reserved[4];
-			__u8 dest_id;
-		} fields;
-	} redirtbl[KVM_IOAPIC_NUM_PINS];
-};
-
-#define KVM_IRQCHIP_PIC_MASTER   0
-#define KVM_IRQCHIP_PIC_SLAVE    1
-#define KVM_IRQCHIP_IOAPIC       2
-
-/* for KVM_GET_REGS and KVM_SET_REGS */
-struct kvm_regs {
-	/* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
-	__u64 rax, rbx, rcx, rdx;
-	__u64 rsi, rdi, rsp, rbp;
-	__u64 r8,  r9,  r10, r11;
-	__u64 r12, r13, r14, r15;
-	__u64 rip, rflags;
-};
-
-/* for KVM_GET_LAPIC and KVM_SET_LAPIC */
-#define KVM_APIC_REG_SIZE 0x400
-struct kvm_lapic_state {
-	char regs[KVM_APIC_REG_SIZE];
-};
-
-struct kvm_segment {
-	__u64 base;
-	__u32 limit;
-	__u16 selector;
-	__u8  type;
-	__u8  present, dpl, db, s, l, g, avl;
-	__u8  unusable;
-	__u8  padding;
-};
-
-struct kvm_dtable {
-	__u64 base;
-	__u16 limit;
-	__u16 padding[3];
-};
-
-
-/* for KVM_GET_SREGS and KVM_SET_SREGS */
-struct kvm_sregs {
-	/* out (KVM_GET_SREGS) / in (KVM_SET_SREGS) */
-	struct kvm_segment cs, ds, es, fs, gs, ss;
-	struct kvm_segment tr, ldt;
-	struct kvm_dtable gdt, idt;
-	__u64 cr0, cr2, cr3, cr4, cr8;
-	__u64 efer;
-	__u64 apic_base;
-	__u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64];
-};
-
-/* for KVM_GET_FPU and KVM_SET_FPU */
-struct kvm_fpu {
-	__u8  fpr[8][16];
-	__u16 fcw;
-	__u16 fsw;
-	__u8  ftwx;  /* in fxsave format */
-	__u8  pad1;
-	__u16 last_opcode;
-	__u64 last_ip;
-	__u64 last_dp;
-	__u8  xmm[16][16];
-	__u32 mxcsr;
-	__u32 pad2;
-};
-
-struct kvm_msr_entry {
-	__u32 index;
-	__u32 reserved;
-	__u64 data;
-};
-
-/* for KVM_GET_MSRS and KVM_SET_MSRS */
-struct kvm_msrs {
-	__u32 nmsrs; /* number of msrs in entries */
-	__u32 pad;
-
-	struct kvm_msr_entry entries[0];
-};
-
-/* for KVM_GET_MSR_INDEX_LIST */
-struct kvm_msr_list {
-	__u32 nmsrs; /* number of msrs in entries */
-	__u32 indices[0];
-};
-
-
-struct kvm_cpuid_entry {
-	__u32 function;
-	__u32 eax;
-	__u32 ebx;
-	__u32 ecx;
-	__u32 edx;
-	__u32 padding;
-};
-
-/* for KVM_SET_CPUID */
-struct kvm_cpuid {
-	__u32 nent;
-	__u32 padding;
-	struct kvm_cpuid_entry entries[0];
-};
-
-struct kvm_cpuid_entry2 {
-	__u32 function;
-	__u32 index;
-	__u32 flags;
-	__u32 eax;
-	__u32 ebx;
-	__u32 ecx;
-	__u32 edx;
-	__u32 padding[3];
-};
-
-#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX 1
-#define KVM_CPUID_FLAG_STATEFUL_FUNC    2
-#define KVM_CPUID_FLAG_STATE_READ_NEXT  4
-
-/* for KVM_SET_CPUID2 */
-struct kvm_cpuid2 {
-	__u32 nent;
-	__u32 padding;
-	struct kvm_cpuid_entry2 entries[0];
-};
-
-/* for KVM_GET_PIT and KVM_SET_PIT */
-struct kvm_pit_channel_state {
-	__u32 count; /* can be 65536 */
-	__u16 latched_count;
-	__u8 count_latched;
-	__u8 status_latched;
-	__u8 status;
-	__u8 read_state;
-	__u8 write_state;
-	__u8 write_latch;
-	__u8 rw_mode;
-	__u8 mode;
-	__u8 bcd;
-	__u8 gate;
-	__s64 count_load_time;
-};
-
-struct kvm_pit_state {
-	struct kvm_pit_channel_state channels[3];
-};
-#endif /* ASM_X86__KVM_H */
diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h
deleted file mode 100644
index 411fb8c..0000000
--- a/include/asm-x86/kvm_host.h
+++ /dev/null
@@ -1,752 +0,0 @@
-/*
- * Kernel-based Virtual Machine driver for Linux
- *
- * This header defines architecture specific interfaces, x86 version
- *
- * This work is licensed under the terms of the GNU GPL, version 2.  See
- * the COPYING file in the top-level directory.
- *
- */
-
-#ifndef ASM_X86__KVM_HOST_H
-#define ASM_X86__KVM_HOST_H
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/mmu_notifier.h>
-
-#include <linux/kvm.h>
-#include <linux/kvm_para.h>
-#include <linux/kvm_types.h>
-
-#include <asm/pvclock-abi.h>
-#include <asm/desc.h>
-
-#define KVM_MAX_VCPUS 16
-#define KVM_MEMORY_SLOTS 32
-/* memory slots that does not exposed to userspace */
-#define KVM_PRIVATE_MEM_SLOTS 4
-
-#define KVM_PIO_PAGE_OFFSET 1
-#define KVM_COALESCED_MMIO_PAGE_OFFSET 2
-
-#define CR3_PAE_RESERVED_BITS ((X86_CR3_PWT | X86_CR3_PCD) - 1)
-#define CR3_NONPAE_RESERVED_BITS ((PAGE_SIZE-1) & ~(X86_CR3_PWT | X86_CR3_PCD))
-#define CR3_L_MODE_RESERVED_BITS (CR3_NONPAE_RESERVED_BITS |	\
-				  0xFFFFFF0000000000ULL)
-
-#define KVM_GUEST_CR0_MASK				   \
-	(X86_CR0_PG | X86_CR0_PE | X86_CR0_WP | X86_CR0_NE \
-	 | X86_CR0_NW | X86_CR0_CD)
-#define KVM_VM_CR0_ALWAYS_ON						\
-	(X86_CR0_PG | X86_CR0_PE | X86_CR0_WP | X86_CR0_NE | X86_CR0_TS \
-	 | X86_CR0_MP)
-#define KVM_GUEST_CR4_MASK						\
-	(X86_CR4_VME | X86_CR4_PSE | X86_CR4_PAE | X86_CR4_PGE | X86_CR4_VMXE)
-#define KVM_PMODE_VM_CR4_ALWAYS_ON (X86_CR4_PAE | X86_CR4_VMXE)
-#define KVM_RMODE_VM_CR4_ALWAYS_ON (X86_CR4_VME | X86_CR4_PAE | X86_CR4_VMXE)
-
-#define INVALID_PAGE (~(hpa_t)0)
-#define UNMAPPED_GVA (~(gpa_t)0)
-
-/* shadow tables are PAE even on non-PAE hosts */
-#define KVM_HPAGE_SHIFT 21
-#define KVM_HPAGE_SIZE (1UL << KVM_HPAGE_SHIFT)
-#define KVM_HPAGE_MASK (~(KVM_HPAGE_SIZE - 1))
-
-#define KVM_PAGES_PER_HPAGE (KVM_HPAGE_SIZE / PAGE_SIZE)
-
-#define DE_VECTOR 0
-#define DB_VECTOR 1
-#define BP_VECTOR 3
-#define OF_VECTOR 4
-#define BR_VECTOR 5
-#define UD_VECTOR 6
-#define NM_VECTOR 7
-#define DF_VECTOR 8
-#define TS_VECTOR 10
-#define NP_VECTOR 11
-#define SS_VECTOR 12
-#define GP_VECTOR 13
-#define PF_VECTOR 14
-#define MF_VECTOR 16
-#define MC_VECTOR 18
-
-#define SELECTOR_TI_MASK (1 << 2)
-#define SELECTOR_RPL_MASK 0x03
-
-#define IOPL_SHIFT 12
-
-#define KVM_ALIAS_SLOTS 4
-
-#define KVM_PERMILLE_MMU_PAGES 20
-#define KVM_MIN_ALLOC_MMU_PAGES 64
-#define KVM_MMU_HASH_SHIFT 10
-#define KVM_NUM_MMU_PAGES (1 << KVM_MMU_HASH_SHIFT)
-#define KVM_MIN_FREE_MMU_PAGES 5
-#define KVM_REFILL_PAGES 25
-#define KVM_MAX_CPUID_ENTRIES 40
-#define KVM_NR_VAR_MTRR 8
-
-extern spinlock_t kvm_lock;
-extern struct list_head vm_list;
-
-struct kvm_vcpu;
-struct kvm;
-
-enum kvm_reg {
-	VCPU_REGS_RAX = 0,
-	VCPU_REGS_RCX = 1,
-	VCPU_REGS_RDX = 2,
-	VCPU_REGS_RBX = 3,
-	VCPU_REGS_RSP = 4,
-	VCPU_REGS_RBP = 5,
-	VCPU_REGS_RSI = 6,
-	VCPU_REGS_RDI = 7,
-#ifdef CONFIG_X86_64
-	VCPU_REGS_R8 = 8,
-	VCPU_REGS_R9 = 9,
-	VCPU_REGS_R10 = 10,
-	VCPU_REGS_R11 = 11,
-	VCPU_REGS_R12 = 12,
-	VCPU_REGS_R13 = 13,
-	VCPU_REGS_R14 = 14,
-	VCPU_REGS_R15 = 15,
-#endif
-	VCPU_REGS_RIP,
-	NR_VCPU_REGS
-};
-
-enum {
-	VCPU_SREG_ES,
-	VCPU_SREG_CS,
-	VCPU_SREG_SS,
-	VCPU_SREG_DS,
-	VCPU_SREG_FS,
-	VCPU_SREG_GS,
-	VCPU_SREG_TR,
-	VCPU_SREG_LDTR,
-};
-
-#include <asm/kvm_x86_emulate.h>
-
-#define KVM_NR_MEM_OBJS 40
-
-struct kvm_guest_debug {
-	int enabled;
-	unsigned long bp[4];
-	int singlestep;
-};
-
-/*
- * We don't want allocation failures within the mmu code, so we preallocate
- * enough memory for a single page fault in a cache.
- */
-struct kvm_mmu_memory_cache {
-	int nobjs;
-	void *objects[KVM_NR_MEM_OBJS];
-};
-
-#define NR_PTE_CHAIN_ENTRIES 5
-
-struct kvm_pte_chain {
-	u64 *parent_ptes[NR_PTE_CHAIN_ENTRIES];
-	struct hlist_node link;
-};
-
-/*
- * kvm_mmu_page_role, below, is defined as:
- *
- *   bits 0:3 - total guest paging levels (2-4, or zero for real mode)
- *   bits 4:7 - page table level for this shadow (1-4)
- *   bits 8:9 - page table quadrant for 2-level guests
- *   bit   16 - "metaphysical" - gfn is not a real page (huge page/real mode)
- *   bits 17:19 - common access permissions for all ptes in this shadow page
- */
-union kvm_mmu_page_role {
-	unsigned word;
-	struct {
-		unsigned glevels:4;
-		unsigned level:4;
-		unsigned quadrant:2;
-		unsigned pad_for_nice_hex_output:6;
-		unsigned metaphysical:1;
-		unsigned access:3;
-		unsigned invalid:1;
-	};
-};
-
-struct kvm_mmu_page {
-	struct list_head link;
-	struct hlist_node hash_link;
-
-	/*
-	 * The following two entries are used to key the shadow page in the
-	 * hash table.
-	 */
-	gfn_t gfn;
-	union kvm_mmu_page_role role;
-
-	u64 *spt;
-	/* hold the gfn of each spte inside spt */
-	gfn_t *gfns;
-	unsigned long slot_bitmap; /* One bit set per slot which has memory
-				    * in this shadow page.
-				    */
-	int multimapped;         /* More than one parent_pte? */
-	int root_count;          /* Currently serving as active root */
-	bool unsync;
-	bool unsync_children;
-	union {
-		u64 *parent_pte;               /* !multimapped */
-		struct hlist_head parent_ptes; /* multimapped, kvm_pte_chain */
-	};
-	DECLARE_BITMAP(unsync_child_bitmap, 512);
-};
-
-struct kvm_pv_mmu_op_buffer {
-	void *ptr;
-	unsigned len;
-	unsigned processed;
-	char buf[512] __aligned(sizeof(long));
-};
-
-/*
- * x86 supports 3 paging modes (4-level 64-bit, 3-level 64-bit, and 2-level
- * 32-bit).  The kvm_mmu structure abstracts the details of the current mmu
- * mode.
- */
-struct kvm_mmu {
-	void (*new_cr3)(struct kvm_vcpu *vcpu);
-	int (*page_fault)(struct kvm_vcpu *vcpu, gva_t gva, u32 err);
-	void (*free)(struct kvm_vcpu *vcpu);
-	gpa_t (*gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t gva);
-	void (*prefetch_page)(struct kvm_vcpu *vcpu,
-			      struct kvm_mmu_page *page);
-	int (*sync_page)(struct kvm_vcpu *vcpu,
-			 struct kvm_mmu_page *sp);
-	void (*invlpg)(struct kvm_vcpu *vcpu, gva_t gva);
-	hpa_t root_hpa;
-	int root_level;
-	int shadow_root_level;
-
-	u64 *pae_root;
-};
-
-struct kvm_vcpu_arch {
-	u64 host_tsc;
-	int interrupt_window_open;
-	unsigned long irq_summary; /* bit vector: 1 per word in irq_pending */
-	DECLARE_BITMAP(irq_pending, KVM_NR_INTERRUPTS);
-	/*
-	 * rip and regs accesses must go through
-	 * kvm_{register,rip}_{read,write} functions.
-	 */
-	unsigned long regs[NR_VCPU_REGS];
-	u32 regs_avail;
-	u32 regs_dirty;
-
-	unsigned long cr0;
-	unsigned long cr2;
-	unsigned long cr3;
-	unsigned long cr4;
-	unsigned long cr8;
-	u64 pdptrs[4]; /* pae */
-	u64 shadow_efer;
-	u64 apic_base;
-	struct kvm_lapic *apic;    /* kernel irqchip context */
-	int mp_state;
-	int sipi_vector;
-	u64 ia32_misc_enable_msr;
-	bool tpr_access_reporting;
-
-	struct kvm_mmu mmu;
-	/* only needed in kvm_pv_mmu_op() path, but it's hot so
-	 * put it here to avoid allocation */
-	struct kvm_pv_mmu_op_buffer mmu_op_buffer;
-
-	struct kvm_mmu_memory_cache mmu_pte_chain_cache;
-	struct kvm_mmu_memory_cache mmu_rmap_desc_cache;
-	struct kvm_mmu_memory_cache mmu_page_cache;
-	struct kvm_mmu_memory_cache mmu_page_header_cache;
-
-	gfn_t last_pt_write_gfn;
-	int   last_pt_write_count;
-	u64  *last_pte_updated;
-	gfn_t last_pte_gfn;
-
-	struct {
-		gfn_t gfn;	/* presumed gfn during guest pte update */
-		pfn_t pfn;	/* pfn corresponding to that gfn */
-		int largepage;
-		unsigned long mmu_seq;
-	} update_pte;
-
-	struct i387_fxsave_struct host_fx_image;
-	struct i387_fxsave_struct guest_fx_image;
-
-	gva_t mmio_fault_cr2;
-	struct kvm_pio_request pio;
-	void *pio_data;
-
-	struct kvm_queued_exception {
-		bool pending;
-		bool has_error_code;
-		u8 nr;
-		u32 error_code;
-	} exception;
-
-	struct kvm_queued_interrupt {
-		bool pending;
-		u8 nr;
-	} interrupt;
-
-	struct {
-		int active;
-		u8 save_iopl;
-		struct kvm_save_segment {
-			u16 selector;
-			unsigned long base;
-			u32 limit;
-			u32 ar;
-		} tr, es, ds, fs, gs;
-	} rmode;
-	int halt_request; /* real mode on Intel only */
-
-	int cpuid_nent;
-	struct kvm_cpuid_entry2 cpuid_entries[KVM_MAX_CPUID_ENTRIES];
-	/* emulate context */
-
-	struct x86_emulate_ctxt emulate_ctxt;
-
-	gpa_t time;
-	struct pvclock_vcpu_time_info hv_clock;
-	unsigned int hv_clock_tsc_khz;
-	unsigned int time_offset;
-	struct page *time_page;
-
-	bool nmi_pending;
-	bool nmi_injected;
-
-	u64 mtrr[0x100];
-};
-
-struct kvm_mem_alias {
-	gfn_t base_gfn;
-	unsigned long npages;
-	gfn_t target_gfn;
-};
-
-struct kvm_arch{
-	int naliases;
-	struct kvm_mem_alias aliases[KVM_ALIAS_SLOTS];
-
-	unsigned int n_free_mmu_pages;
-	unsigned int n_requested_mmu_pages;
-	unsigned int n_alloc_mmu_pages;
-	struct hlist_head mmu_page_hash[KVM_NUM_MMU_PAGES];
-	/*
-	 * Hash table of struct kvm_mmu_page.
-	 */
-	struct list_head active_mmu_pages;
-	struct list_head assigned_dev_head;
-	struct dmar_domain *intel_iommu_domain;
-	struct kvm_pic *vpic;
-	struct kvm_ioapic *vioapic;
-	struct kvm_pit *vpit;
-	struct hlist_head irq_ack_notifier_list;
-
-	int round_robin_prev_vcpu;
-	unsigned int tss_addr;
-	struct page *apic_access_page;
-
-	gpa_t wall_clock;
-
-	struct page *ept_identity_pagetable;
-	bool ept_identity_pagetable_done;
-};
-
-struct kvm_vm_stat {
-	u32 mmu_shadow_zapped;
-	u32 mmu_pte_write;
-	u32 mmu_pte_updated;
-	u32 mmu_pde_zapped;
-	u32 mmu_flooded;
-	u32 mmu_recycled;
-	u32 mmu_cache_miss;
-	u32 mmu_unsync;
-	u32 remote_tlb_flush;
-	u32 lpages;
-};
-
-struct kvm_vcpu_stat {
-	u32 pf_fixed;
-	u32 pf_guest;
-	u32 tlb_flush;
-	u32 invlpg;
-
-	u32 exits;
-	u32 io_exits;
-	u32 mmio_exits;
-	u32 signal_exits;
-	u32 irq_window_exits;
-	u32 nmi_window_exits;
-	u32 halt_exits;
-	u32 halt_wakeup;
-	u32 request_irq_exits;
-	u32 irq_exits;
-	u32 host_state_reload;
-	u32 efer_reload;
-	u32 fpu_reload;
-	u32 insn_emulation;
-	u32 insn_emulation_fail;
-	u32 hypercalls;
-	u32 irq_injections;
-};
-
-struct descriptor_table {
-	u16 limit;
-	unsigned long base;
-} __attribute__((packed));
-
-struct kvm_x86_ops {
-	int (*cpu_has_kvm_support)(void);          /* __init */
-	int (*disabled_by_bios)(void);             /* __init */
-	void (*hardware_enable)(void *dummy);      /* __init */
-	void (*hardware_disable)(void *dummy);
-	void (*check_processor_compatibility)(void *rtn);
-	int (*hardware_setup)(void);               /* __init */
-	void (*hardware_unsetup)(void);            /* __exit */
-	bool (*cpu_has_accelerated_tpr)(void);
-
-	/* Create, but do not attach this VCPU */
-	struct kvm_vcpu *(*vcpu_create)(struct kvm *kvm, unsigned id);
-	void (*vcpu_free)(struct kvm_vcpu *vcpu);
-	int (*vcpu_reset)(struct kvm_vcpu *vcpu);
-
-	void (*prepare_guest_switch)(struct kvm_vcpu *vcpu);
-	void (*vcpu_load)(struct kvm_vcpu *vcpu, int cpu);
-	void (*vcpu_put)(struct kvm_vcpu *vcpu);
-
-	int (*set_guest_debug)(struct kvm_vcpu *vcpu,
-			       struct kvm_debug_guest *dbg);
-	void (*guest_debug_pre)(struct kvm_vcpu *vcpu);
-	int (*get_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata);
-	int (*set_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 data);
-	u64 (*get_segment_base)(struct kvm_vcpu *vcpu, int seg);
-	void (*get_segment)(struct kvm_vcpu *vcpu,
-			    struct kvm_segment *var, int seg);
-	int (*get_cpl)(struct kvm_vcpu *vcpu);
-	void (*set_segment)(struct kvm_vcpu *vcpu,
-			    struct kvm_segment *var, int seg);
-	void (*get_cs_db_l_bits)(struct kvm_vcpu *vcpu, int *db, int *l);
-	void (*decache_cr4_guest_bits)(struct kvm_vcpu *vcpu);
-	void (*set_cr0)(struct kvm_vcpu *vcpu, unsigned long cr0);
-	void (*set_cr3)(struct kvm_vcpu *vcpu, unsigned long cr3);
-	void (*set_cr4)(struct kvm_vcpu *vcpu, unsigned long cr4);
-	void (*set_efer)(struct kvm_vcpu *vcpu, u64 efer);
-	void (*get_idt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
-	void (*set_idt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
-	void (*get_gdt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
-	void (*set_gdt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
-	unsigned long (*get_dr)(struct kvm_vcpu *vcpu, int dr);
-	void (*set_dr)(struct kvm_vcpu *vcpu, int dr, unsigned long value,
-		       int *exception);
-	void (*cache_reg)(struct kvm_vcpu *vcpu, enum kvm_reg reg);
-	unsigned long (*get_rflags)(struct kvm_vcpu *vcpu);
-	void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags);
-
-	void (*tlb_flush)(struct kvm_vcpu *vcpu);
-
-	void (*run)(struct kvm_vcpu *vcpu, struct kvm_run *run);
-	int (*handle_exit)(struct kvm_run *run, struct kvm_vcpu *vcpu);
-	void (*skip_emulated_instruction)(struct kvm_vcpu *vcpu);
-	void (*patch_hypercall)(struct kvm_vcpu *vcpu,
-				unsigned char *hypercall_addr);
-	int (*get_irq)(struct kvm_vcpu *vcpu);
-	void (*set_irq)(struct kvm_vcpu *vcpu, int vec);
-	void (*queue_exception)(struct kvm_vcpu *vcpu, unsigned nr,
-				bool has_error_code, u32 error_code);
-	bool (*exception_injected)(struct kvm_vcpu *vcpu);
-	void (*inject_pending_irq)(struct kvm_vcpu *vcpu);
-	void (*inject_pending_vectors)(struct kvm_vcpu *vcpu,
-				       struct kvm_run *run);
-
-	int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
-	int (*get_tdp_level)(void);
-};
-
-extern struct kvm_x86_ops *kvm_x86_ops;
-
-int kvm_mmu_module_init(void);
-void kvm_mmu_module_exit(void);
-
-void kvm_mmu_destroy(struct kvm_vcpu *vcpu);
-int kvm_mmu_create(struct kvm_vcpu *vcpu);
-int kvm_mmu_setup(struct kvm_vcpu *vcpu);
-void kvm_mmu_set_nonpresent_ptes(u64 trap_pte, u64 notrap_pte);
-void kvm_mmu_set_base_ptes(u64 base_pte);
-void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask,
-		u64 dirty_mask, u64 nx_mask, u64 x_mask);
-
-int kvm_mmu_reset_context(struct kvm_vcpu *vcpu);
-void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot);
-void kvm_mmu_zap_all(struct kvm *kvm);
-unsigned int kvm_mmu_calculate_mmu_pages(struct kvm *kvm);
-void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int kvm_nr_mmu_pages);
-
-int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3);
-
-int emulator_write_phys(struct kvm_vcpu *vcpu, gpa_t gpa,
-			  const void *val, int bytes);
-int kvm_pv_mmu_op(struct kvm_vcpu *vcpu, unsigned long bytes,
-		  gpa_t addr, unsigned long *ret);
-
-extern bool tdp_enabled;
-
-enum emulation_result {
-	EMULATE_DONE,       /* no further processing */
-	EMULATE_DO_MMIO,      /* kvm_run filled with mmio request */
-	EMULATE_FAIL,         /* can't emulate this instruction */
-};
-
-#define EMULTYPE_NO_DECODE	    (1 << 0)
-#define EMULTYPE_TRAP_UD	    (1 << 1)
-int emulate_instruction(struct kvm_vcpu *vcpu, struct kvm_run *run,
-			unsigned long cr2, u16 error_code, int emulation_type);
-void kvm_report_emulation_failure(struct kvm_vcpu *cvpu, const char *context);
-void realmode_lgdt(struct kvm_vcpu *vcpu, u16 size, unsigned long address);
-void realmode_lidt(struct kvm_vcpu *vcpu, u16 size, unsigned long address);
-void realmode_lmsw(struct kvm_vcpu *vcpu, unsigned long msw,
-		   unsigned long *rflags);
-
-unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr);
-void realmode_set_cr(struct kvm_vcpu *vcpu, int cr, unsigned long value,
-		     unsigned long *rflags);
-void kvm_enable_efer_bits(u64);
-int kvm_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *data);
-int kvm_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data);
-
-struct x86_emulate_ctxt;
-
-int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
-		     int size, unsigned port);
-int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
-			   int size, unsigned long count, int down,
-			    gva_t address, int rep, unsigned port);
-void kvm_emulate_cpuid(struct kvm_vcpu *vcpu);
-int kvm_emulate_halt(struct kvm_vcpu *vcpu);
-int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address);
-int emulate_clts(struct kvm_vcpu *vcpu);
-int emulator_get_dr(struct x86_emulate_ctxt *ctxt, int dr,
-		    unsigned long *dest);
-int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr,
-		    unsigned long value);
-
-void kvm_get_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg);
-int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
-				int type_bits, int seg);
-
-int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason);
-
-void kvm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0);
-void kvm_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3);
-void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
-void kvm_set_cr8(struct kvm_vcpu *vcpu, unsigned long cr8);
-unsigned long kvm_get_cr8(struct kvm_vcpu *vcpu);
-void kvm_lmsw(struct kvm_vcpu *vcpu, unsigned long msw);
-void kvm_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l);
-
-int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata);
-int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data);
-
-void kvm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr);
-void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code);
-void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long cr2,
-			   u32 error_code);
-
-void kvm_pic_set_irq(void *opaque, int irq, int level);
-
-void kvm_inject_nmi(struct kvm_vcpu *vcpu);
-
-void fx_init(struct kvm_vcpu *vcpu);
-
-int emulator_read_std(unsigned long addr,
-		      void *val,
-		      unsigned int bytes,
-		      struct kvm_vcpu *vcpu);
-int emulator_write_emulated(unsigned long addr,
-			    const void *val,
-			    unsigned int bytes,
-			    struct kvm_vcpu *vcpu);
-
-unsigned long segment_base(u16 selector);
-
-void kvm_mmu_flush_tlb(struct kvm_vcpu *vcpu);
-void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
-		       const u8 *new, int bytes);
-int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva);
-void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu);
-int kvm_mmu_load(struct kvm_vcpu *vcpu);
-void kvm_mmu_unload(struct kvm_vcpu *vcpu);
-void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu);
-
-int kvm_emulate_hypercall(struct kvm_vcpu *vcpu);
-
-int kvm_fix_hypercall(struct kvm_vcpu *vcpu);
-
-int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t gva, u32 error_code);
-void kvm_mmu_invlpg(struct kvm_vcpu *vcpu, gva_t gva);
-
-void kvm_enable_tdp(void);
-void kvm_disable_tdp(void);
-
-int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3);
-int complete_pio(struct kvm_vcpu *vcpu);
-
-static inline struct kvm_mmu_page *page_header(hpa_t shadow_page)
-{
-	struct page *page = pfn_to_page(shadow_page >> PAGE_SHIFT);
-
-	return (struct kvm_mmu_page *)page_private(page);
-}
-
-static inline u16 kvm_read_fs(void)
-{
-	u16 seg;
-	asm("mov %%fs, %0" : "=g"(seg));
-	return seg;
-}
-
-static inline u16 kvm_read_gs(void)
-{
-	u16 seg;
-	asm("mov %%gs, %0" : "=g"(seg));
-	return seg;
-}
-
-static inline u16 kvm_read_ldt(void)
-{
-	u16 ldt;
-	asm("sldt %0" : "=g"(ldt));
-	return ldt;
-}
-
-static inline void kvm_load_fs(u16 sel)
-{
-	asm("mov %0, %%fs" : : "rm"(sel));
-}
-
-static inline void kvm_load_gs(u16 sel)
-{
-	asm("mov %0, %%gs" : : "rm"(sel));
-}
-
-static inline void kvm_load_ldt(u16 sel)
-{
-	asm("lldt %0" : : "rm"(sel));
-}
-
-static inline void kvm_get_idt(struct descriptor_table *table)
-{
-	asm("sidt %0" : "=m"(*table));
-}
-
-static inline void kvm_get_gdt(struct descriptor_table *table)
-{
-	asm("sgdt %0" : "=m"(*table));
-}
-
-static inline unsigned long kvm_read_tr_base(void)
-{
-	u16 tr;
-	asm("str %0" : "=g"(tr));
-	return segment_base(tr);
-}
-
-#ifdef CONFIG_X86_64
-static inline unsigned long read_msr(unsigned long msr)
-{
-	u64 value;
-
-	rdmsrl(msr, value);
-	return value;
-}
-#endif
-
-static inline void kvm_fx_save(struct i387_fxsave_struct *image)
-{
-	asm("fxsave (%0)":: "r" (image));
-}
-
-static inline void kvm_fx_restore(struct i387_fxsave_struct *image)
-{
-	asm("fxrstor (%0)":: "r" (image));
-}
-
-static inline void kvm_fx_finit(void)
-{
-	asm("finit");
-}
-
-static inline u32 get_rdx_init_val(void)
-{
-	return 0x600; /* P6 family */
-}
-
-static inline void kvm_inject_gp(struct kvm_vcpu *vcpu, u32 error_code)
-{
-	kvm_queue_exception_e(vcpu, GP_VECTOR, error_code);
-}
-
-#define ASM_VMX_VMCLEAR_RAX       ".byte 0x66, 0x0f, 0xc7, 0x30"
-#define ASM_VMX_VMLAUNCH          ".byte 0x0f, 0x01, 0xc2"
-#define ASM_VMX_VMRESUME          ".byte 0x0f, 0x01, 0xc3"
-#define ASM_VMX_VMPTRLD_RAX       ".byte 0x0f, 0xc7, 0x30"
-#define ASM_VMX_VMREAD_RDX_RAX    ".byte 0x0f, 0x78, 0xd0"
-#define ASM_VMX_VMWRITE_RAX_RDX   ".byte 0x0f, 0x79, 0xd0"
-#define ASM_VMX_VMWRITE_RSP_RDX   ".byte 0x0f, 0x79, 0xd4"
-#define ASM_VMX_VMXOFF            ".byte 0x0f, 0x01, 0xc4"
-#define ASM_VMX_VMXON_RAX         ".byte 0xf3, 0x0f, 0xc7, 0x30"
-#define ASM_VMX_INVEPT		  ".byte 0x66, 0x0f, 0x38, 0x80, 0x08"
-#define ASM_VMX_INVVPID		  ".byte 0x66, 0x0f, 0x38, 0x81, 0x08"
-
-#define MSR_IA32_TIME_STAMP_COUNTER		0x010
-
-#define TSS_IOPB_BASE_OFFSET 0x66
-#define TSS_BASE_SIZE 0x68
-#define TSS_IOPB_SIZE (65536 / 8)
-#define TSS_REDIRECTION_SIZE (256 / 8)
-#define RMODE_TSS_SIZE							\
-	(TSS_BASE_SIZE + TSS_REDIRECTION_SIZE + TSS_IOPB_SIZE + 1)
-
-enum {
-	TASK_SWITCH_CALL = 0,
-	TASK_SWITCH_IRET = 1,
-	TASK_SWITCH_JMP = 2,
-	TASK_SWITCH_GATE = 3,
-};
-
-/*
- * Hardware virtualization extension instructions may fault if a
- * reboot turns off virtualization while processes are running.
- * Trap the fault and ignore the instruction if that happens.
- */
-asmlinkage void kvm_handle_fault_on_reboot(void);
-
-#define __kvm_handle_fault_on_reboot(insn) \
-	"666: " insn "\n\t" \
-	".pushsection .fixup, \"ax\" \n" \
-	"667: \n\t" \
-	__ASM_SIZE(push) " $666b \n\t"	      \
-	"jmp kvm_handle_fault_on_reboot \n\t" \
-	".popsection \n\t" \
-	".pushsection __ex_table, \"a\" \n\t" \
-	_ASM_PTR " 666b, 667b \n\t" \
-	".popsection"
-
-#define KVM_ARCH_WANT_MMU_NOTIFIER
-int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
-int kvm_age_hva(struct kvm *kvm, unsigned long hva);
-
-#endif /* ASM_X86__KVM_HOST_H */
diff --git a/include/asm-x86/kvm_para.h b/include/asm-x86/kvm_para.h
deleted file mode 100644
index 30054fd..0000000
--- a/include/asm-x86/kvm_para.h
+++ /dev/null
@@ -1,147 +0,0 @@
-#ifndef ASM_X86__KVM_PARA_H
-#define ASM_X86__KVM_PARA_H
-
-/* This CPUID returns the signature 'KVMKVMKVM' in ebx, ecx, and edx.  It
- * should be used to determine that a VM is running under KVM.
- */
-#define KVM_CPUID_SIGNATURE	0x40000000
-
-/* This CPUID returns a feature bitmap in eax.  Before enabling a particular
- * paravirtualization, the appropriate feature bit should be checked.
- */
-#define KVM_CPUID_FEATURES	0x40000001
-#define KVM_FEATURE_CLOCKSOURCE		0
-#define KVM_FEATURE_NOP_IO_DELAY	1
-#define KVM_FEATURE_MMU_OP		2
-
-#define MSR_KVM_WALL_CLOCK  0x11
-#define MSR_KVM_SYSTEM_TIME 0x12
-
-#define KVM_MAX_MMU_OP_BATCH           32
-
-/* Operations for KVM_HC_MMU_OP */
-#define KVM_MMU_OP_WRITE_PTE            1
-#define KVM_MMU_OP_FLUSH_TLB	        2
-#define KVM_MMU_OP_RELEASE_PT	        3
-
-/* Payload for KVM_HC_MMU_OP */
-struct kvm_mmu_op_header {
-	__u32 op;
-	__u32 pad;
-};
-
-struct kvm_mmu_op_write_pte {
-	struct kvm_mmu_op_header header;
-	__u64 pte_phys;
-	__u64 pte_val;
-};
-
-struct kvm_mmu_op_flush_tlb {
-	struct kvm_mmu_op_header header;
-};
-
-struct kvm_mmu_op_release_pt {
-	struct kvm_mmu_op_header header;
-	__u64 pt_phys;
-};
-
-#ifdef __KERNEL__
-#include <asm/processor.h>
-
-extern void kvmclock_init(void);
-
-
-/* This instruction is vmcall.  On non-VT architectures, it will generate a
- * trap that we will then rewrite to the appropriate instruction.
- */
-#define KVM_HYPERCALL ".byte 0x0f,0x01,0xc1"
-
-/* For KVM hypercalls, a three-byte sequence of either the vmrun or the vmmrun
- * instruction.  The hypervisor may replace it with something else but only the
- * instructions are guaranteed to be supported.
- *
- * Up to four arguments may be passed in rbx, rcx, rdx, and rsi respectively.
- * The hypercall number should be placed in rax and the return value will be
- * placed in rax.  No other registers will be clobbered unless explicited
- * noted by the particular hypercall.
- */
-
-static inline long kvm_hypercall0(unsigned int nr)
-{
-	long ret;
-	asm volatile(KVM_HYPERCALL
-		     : "=a"(ret)
-		     : "a"(nr)
-		     : "memory");
-	return ret;
-}
-
-static inline long kvm_hypercall1(unsigned int nr, unsigned long p1)
-{
-	long ret;
-	asm volatile(KVM_HYPERCALL
-		     : "=a"(ret)
-		     : "a"(nr), "b"(p1)
-		     : "memory");
-	return ret;
-}
-
-static inline long kvm_hypercall2(unsigned int nr, unsigned long p1,
-				  unsigned long p2)
-{
-	long ret;
-	asm volatile(KVM_HYPERCALL
-		     : "=a"(ret)
-		     : "a"(nr), "b"(p1), "c"(p2)
-		     : "memory");
-	return ret;
-}
-
-static inline long kvm_hypercall3(unsigned int nr, unsigned long p1,
-				  unsigned long p2, unsigned long p3)
-{
-	long ret;
-	asm volatile(KVM_HYPERCALL
-		     : "=a"(ret)
-		     : "a"(nr), "b"(p1), "c"(p2), "d"(p3)
-		     : "memory");
-	return ret;
-}
-
-static inline long kvm_hypercall4(unsigned int nr, unsigned long p1,
-				  unsigned long p2, unsigned long p3,
-				  unsigned long p4)
-{
-	long ret;
-	asm volatile(KVM_HYPERCALL
-		     : "=a"(ret)
-		     : "a"(nr), "b"(p1), "c"(p2), "d"(p3), "S"(p4)
-		     : "memory");
-	return ret;
-}
-
-static inline int kvm_para_available(void)
-{
-	unsigned int eax, ebx, ecx, edx;
-	char signature[13];
-
-	cpuid(KVM_CPUID_SIGNATURE, &eax, &ebx, &ecx, &edx);
-	memcpy(signature + 0, &ebx, 4);
-	memcpy(signature + 4, &ecx, 4);
-	memcpy(signature + 8, &edx, 4);
-	signature[12] = 0;
-
-	if (strcmp(signature, "KVMKVMKVM") == 0)
-		return 1;
-
-	return 0;
-}
-
-static inline unsigned int kvm_arch_para_features(void)
-{
-	return cpuid_eax(KVM_CPUID_FEATURES);
-}
-
-#endif
-
-#endif /* ASM_X86__KVM_PARA_H */
diff --git a/include/asm-x86/kvm_x86_emulate.h b/include/asm-x86/kvm_x86_emulate.h
deleted file mode 100644
index e2d9b03..0000000
--- a/include/asm-x86/kvm_x86_emulate.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/******************************************************************************
- * x86_emulate.h
- *
- * Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
- *
- * Copyright (c) 2005 Keir Fraser
- *
- * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
- */
-
-#ifndef ASM_X86__KVM_X86_EMULATE_H
-#define ASM_X86__KVM_X86_EMULATE_H
-
-struct x86_emulate_ctxt;
-
-/*
- * x86_emulate_ops:
- *
- * These operations represent the instruction emulator's interface to memory.
- * There are two categories of operation: those that act on ordinary memory
- * regions (*_std), and those that act on memory regions known to require
- * special treatment or emulation (*_emulated).
- *
- * The emulator assumes that an instruction accesses only one 'emulated memory'
- * location, that this location is the given linear faulting address (cr2), and
- * that this is one of the instruction's data operands. Instruction fetches and
- * stack operations are assumed never to access emulated memory. The emulator
- * automatically deduces which operand of a string-move operation is accessing
- * emulated memory, and assumes that the other operand accesses normal memory.
- *
- * NOTES:
- *  1. The emulator isn't very smart about emulated vs. standard memory.
- *     'Emulated memory' access addresses should be checked for sanity.
- *     'Normal memory' accesses may fault, and the caller must arrange to
- *     detect and handle reentrancy into the emulator via recursive faults.
- *     Accesses may be unaligned and may cross page boundaries.
- *  2. If the access fails (cannot emulate, or a standard access faults) then
- *     it is up to the memop to propagate the fault to the guest VM via
- *     some out-of-band mechanism, unknown to the emulator. The memop signals
- *     failure by returning X86EMUL_PROPAGATE_FAULT to the emulator, which will
- *     then immediately bail.
- *  3. Valid access sizes are 1, 2, 4 and 8 bytes. On x86/32 systems only
- *     cmpxchg8b_emulated need support 8-byte accesses.
- *  4. The emulator cannot handle 64-bit mode emulation on an x86/32 system.
- */
-/* Access completed successfully: continue emulation as normal. */
-#define X86EMUL_CONTINUE        0
-/* Access is unhandleable: bail from emulation and return error to caller. */
-#define X86EMUL_UNHANDLEABLE    1
-/* Terminate emulation but return success to the caller. */
-#define X86EMUL_PROPAGATE_FAULT 2 /* propagate a generated fault to guest */
-#define X86EMUL_RETRY_INSTR     2 /* retry the instruction for some reason */
-#define X86EMUL_CMPXCHG_FAILED  2 /* cmpxchg did not see expected value */
-struct x86_emulate_ops {
-	/*
-	 * read_std: Read bytes of standard (non-emulated/special) memory.
-	 *           Used for instruction fetch, stack operations, and others.
-	 *  @addr:  [IN ] Linear address from which to read.
-	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
-	 *  @bytes: [IN ] Number of bytes to read from memory.
-	 */
-	int (*read_std)(unsigned long addr, void *val,
-			unsigned int bytes, struct kvm_vcpu *vcpu);
-
-	/*
-	 * read_emulated: Read bytes from emulated/special memory area.
-	 *  @addr:  [IN ] Linear address from which to read.
-	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
-	 *  @bytes: [IN ] Number of bytes to read from memory.
-	 */
-	int (*read_emulated)(unsigned long addr,
-			     void *val,
-			     unsigned int bytes,
-			     struct kvm_vcpu *vcpu);
-
-	/*
-	 * write_emulated: Read bytes from emulated/special memory area.
-	 *  @addr:  [IN ] Linear address to which to write.
-	 *  @val:   [IN ] Value to write to memory (low-order bytes used as
-	 *                required).
-	 *  @bytes: [IN ] Number of bytes to write to memory.
-	 */
-	int (*write_emulated)(unsigned long addr,
-			      const void *val,
-			      unsigned int bytes,
-			      struct kvm_vcpu *vcpu);
-
-	/*
-	 * cmpxchg_emulated: Emulate an atomic (LOCKed) CMPXCHG operation on an
-	 *                   emulated/special memory area.
-	 *  @addr:  [IN ] Linear address to access.
-	 *  @old:   [IN ] Value expected to be current at @addr.
-	 *  @new:   [IN ] Value to write to @addr.
-	 *  @bytes: [IN ] Number of bytes to access using CMPXCHG.
-	 */
-	int (*cmpxchg_emulated)(unsigned long addr,
-				const void *old,
-				const void *new,
-				unsigned int bytes,
-				struct kvm_vcpu *vcpu);
-
-};
-
-/* Type, address-of, and value of an instruction's operand. */
-struct operand {
-	enum { OP_REG, OP_MEM, OP_IMM, OP_NONE } type;
-	unsigned int bytes;
-	unsigned long val, orig_val, *ptr;
-};
-
-struct fetch_cache {
-	u8 data[15];
-	unsigned long start;
-	unsigned long end;
-};
-
-struct decode_cache {
-	u8 twobyte;
-	u8 b;
-	u8 lock_prefix;
-	u8 rep_prefix;
-	u8 op_bytes;
-	u8 ad_bytes;
-	u8 rex_prefix;
-	struct operand src;
-	struct operand dst;
-	bool has_seg_override;
-	u8 seg_override;
-	unsigned int d;
-	unsigned long regs[NR_VCPU_REGS];
-	unsigned long eip;
-	/* modrm */
-	u8 modrm;
-	u8 modrm_mod;
-	u8 modrm_reg;
-	u8 modrm_rm;
-	u8 use_modrm_ea;
-	bool rip_relative;
-	unsigned long modrm_ea;
-	void *modrm_ptr;
-	unsigned long modrm_val;
-	struct fetch_cache fetch;
-};
-
-struct x86_emulate_ctxt {
-	/* Register state before/after emulation. */
-	struct kvm_vcpu *vcpu;
-
-	/* Linear faulting address (if emulating a page-faulting instruction) */
-	unsigned long eflags;
-
-	/* Emulated execution mode, represented by an X86EMUL_MODE value. */
-	int mode;
-
-	u32 cs_base;
-
-	/* decode cache */
-
-	struct decode_cache decode;
-};
-
-/* Repeat String Operation Prefix */
-#define REPE_PREFIX  1
-#define REPNE_PREFIX    2
-
-/* Execution mode, passed to the emulator. */
-#define X86EMUL_MODE_REAL     0	/* Real mode.             */
-#define X86EMUL_MODE_PROT16   2	/* 16-bit protected mode. */
-#define X86EMUL_MODE_PROT32   4	/* 32-bit protected mode. */
-#define X86EMUL_MODE_PROT64   8	/* 64-bit (long) mode.    */
-
-/* Host execution mode. */
-#if defined(__i386__)
-#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT32
-#elif defined(CONFIG_X86_64)
-#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT64
-#endif
-
-int x86_decode_insn(struct x86_emulate_ctxt *ctxt,
-		    struct x86_emulate_ops *ops);
-int x86_emulate_insn(struct x86_emulate_ctxt *ctxt,
-		     struct x86_emulate_ops *ops);
-
-#endif /* ASM_X86__KVM_X86_EMULATE_H */
diff --git a/include/asm-x86/ldt.h b/include/asm-x86/ldt.h
deleted file mode 100644
index a522850..0000000
--- a/include/asm-x86/ldt.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * ldt.h
- *
- * Definitions of structures used with the modify_ldt system call.
- */
-#ifndef ASM_X86__LDT_H
-#define ASM_X86__LDT_H
-
-/* Maximum number of LDT entries supported. */
-#define LDT_ENTRIES	8192
-/* The size of each LDT entry. */
-#define LDT_ENTRY_SIZE	8
-
-#ifndef __ASSEMBLY__
-/*
- * Note on 64bit base and limit is ignored and you cannot set DS/ES/CS
- * not to the default values if you still want to do syscalls. This
- * call is more for 32bit mode therefore.
- */
-struct user_desc {
-	unsigned int  entry_number;
-	unsigned int  base_addr;
-	unsigned int  limit;
-	unsigned int  seg_32bit:1;
-	unsigned int  contents:2;
-	unsigned int  read_exec_only:1;
-	unsigned int  limit_in_pages:1;
-	unsigned int  seg_not_present:1;
-	unsigned int  useable:1;
-#ifdef __x86_64__
-	unsigned int  lm:1;
-#endif
-};
-
-#define MODIFY_LDT_CONTENTS_DATA	0
-#define MODIFY_LDT_CONTENTS_STACK	1
-#define MODIFY_LDT_CONTENTS_CODE	2
-
-#endif /* !__ASSEMBLY__ */
-#endif /* ASM_X86__LDT_H */
diff --git a/include/asm-x86/lguest.h b/include/asm-x86/lguest.h
deleted file mode 100644
index 7505e94..0000000
--- a/include/asm-x86/lguest.h
+++ /dev/null
@@ -1,94 +0,0 @@
-#ifndef ASM_X86__LGUEST_H
-#define ASM_X86__LGUEST_H
-
-#define GDT_ENTRY_LGUEST_CS	10
-#define GDT_ENTRY_LGUEST_DS	11
-#define LGUEST_CS		(GDT_ENTRY_LGUEST_CS * 8)
-#define LGUEST_DS		(GDT_ENTRY_LGUEST_DS * 8)
-
-#ifndef __ASSEMBLY__
-#include <asm/desc.h>
-
-#define GUEST_PL 1
-
-/* Every guest maps the core switcher code. */
-#define SHARED_SWITCHER_PAGES \
-	DIV_ROUND_UP(end_switcher_text - start_switcher_text, PAGE_SIZE)
-/* Pages for switcher itself, then two pages per cpu */
-#define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * NR_CPUS)
-
-/* We map at -4M for ease of mapping into the guest (one PTE page). */
-#define SWITCHER_ADDR 0xFFC00000
-
-/* Found in switcher.S */
-extern unsigned long default_idt_entries[];
-
-/* Declarations for definitions in lguest_guest.S */
-extern char lguest_noirq_start[], lguest_noirq_end[];
-extern const char lgstart_cli[], lgend_cli[];
-extern const char lgstart_sti[], lgend_sti[];
-extern const char lgstart_popf[], lgend_popf[];
-extern const char lgstart_pushf[], lgend_pushf[];
-extern const char lgstart_iret[], lgend_iret[];
-
-extern void lguest_iret(void);
-extern void lguest_init(void);
-
-struct lguest_regs {
-	/* Manually saved part. */
-	unsigned long eax, ebx, ecx, edx;
-	unsigned long esi, edi, ebp;
-	unsigned long gs;
-	unsigned long fs, ds, es;
-	unsigned long trapnum, errcode;
-	/* Trap pushed part */
-	unsigned long eip;
-	unsigned long cs;
-	unsigned long eflags;
-	unsigned long esp;
-	unsigned long ss;
-};
-
-/* This is a guest-specific page (mapped ro) into the guest. */
-struct lguest_ro_state {
-	/* Host information we need to restore when we switch back. */
-	u32 host_cr3;
-	struct desc_ptr host_idt_desc;
-	struct desc_ptr host_gdt_desc;
-	u32 host_sp;
-
-	/* Fields which are used when guest is running. */
-	struct desc_ptr guest_idt_desc;
-	struct desc_ptr guest_gdt_desc;
-	struct x86_hw_tss guest_tss;
-	struct desc_struct guest_idt[IDT_ENTRIES];
-	struct desc_struct guest_gdt[GDT_ENTRIES];
-};
-
-struct lg_cpu_arch {
-	/* The GDT entries copied into lguest_ro_state when running. */
-	struct desc_struct gdt[GDT_ENTRIES];
-
-	/* The IDT entries: some copied into lguest_ro_state when running. */
-	struct desc_struct idt[IDT_ENTRIES];
-
-	/* The address of the last guest-visible pagefault (ie. cr2). */
-	unsigned long last_pagefault;
-};
-
-static inline void lguest_set_ts(void)
-{
-	u32 cr0;
-
-	cr0 = read_cr0();
-	if (!(cr0 & 8))
-		write_cr0(cr0 | 8);
-}
-
-/* Full 4G segment descriptors, suitable for CS and DS. */
-#define FULL_EXEC_SEGMENT ((struct desc_struct){ { {0x0000ffff, 0x00cf9b00} } })
-#define FULL_SEGMENT ((struct desc_struct){ { {0x0000ffff, 0x00cf9300} } })
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* ASM_X86__LGUEST_H */
diff --git a/include/asm-x86/lguest_hcall.h b/include/asm-x86/lguest_hcall.h
deleted file mode 100644
index 8f034ba..0000000
--- a/include/asm-x86/lguest_hcall.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* Architecture specific portion of the lguest hypercalls */
-#ifndef ASM_X86__LGUEST_HCALL_H
-#define ASM_X86__LGUEST_HCALL_H
-
-#define LHCALL_FLUSH_ASYNC	0
-#define LHCALL_LGUEST_INIT	1
-#define LHCALL_SHUTDOWN		2
-#define LHCALL_LOAD_GDT		3
-#define LHCALL_NEW_PGTABLE	4
-#define LHCALL_FLUSH_TLB	5
-#define LHCALL_LOAD_IDT_ENTRY	6
-#define LHCALL_SET_STACK	7
-#define LHCALL_TS		8
-#define LHCALL_SET_CLOCKEVENT	9
-#define LHCALL_HALT		10
-#define LHCALL_SET_PTE		14
-#define LHCALL_SET_PMD		15
-#define LHCALL_LOAD_TLS		16
-#define LHCALL_NOTIFY		17
-
-#define LGUEST_TRAP_ENTRY 0x1F
-
-/* Argument number 3 to LHCALL_LGUEST_SHUTDOWN */
-#define LGUEST_SHUTDOWN_POWEROFF	1
-#define LGUEST_SHUTDOWN_RESTART		2
-
-#ifndef __ASSEMBLY__
-#include <asm/hw_irq.h>
-
-/*G:031 But first, how does our Guest contact the Host to ask for privileged
- * operations?  There are two ways: the direct way is to make a "hypercall",
- * to make requests of the Host Itself.
- *
- * Our hypercall mechanism uses the highest unused trap code (traps 32 and
- * above are used by real hardware interrupts).  Fifteen hypercalls are
- * available: the hypercall number is put in the %eax register, and the
- * arguments (when required) are placed in %edx, %ebx and %ecx.  If a return
- * value makes sense, it's returned in %eax.
- *
- * Grossly invalid calls result in Sudden Death at the hands of the vengeful
- * Host, rather than returning failure.  This reflects Winston Churchill's
- * definition of a gentleman: "someone who is only rude intentionally". */
-static inline unsigned long
-hcall(unsigned long call,
-      unsigned long arg1, unsigned long arg2, unsigned long arg3)
-{
-	/* "int" is the Intel instruction to trigger a trap. */
-	asm volatile("int $" __stringify(LGUEST_TRAP_ENTRY)
-		     /* The call in %eax (aka "a") might be overwritten */
-		     : "=a"(call)
-		       /* The arguments are in %eax, %edx, %ebx & %ecx */
-		     : "a"(call), "d"(arg1), "b"(arg2), "c"(arg3)
-		       /* "memory" means this might write somewhere in memory.
-			* This isn't true for all calls, but it's safe to tell
-			* gcc that it might happen so it doesn't get clever. */
-		     : "memory");
-	return call;
-}
-/*:*/
-
-/* Can't use our min() macro here: needs to be a constant */
-#define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32)
-
-#define LHCALL_RING_SIZE 64
-struct hcall_args {
-	/* These map directly onto eax, ebx, ecx, edx in struct lguest_regs */
-	unsigned long arg0, arg2, arg3, arg1;
-};
-
-#endif /* !__ASSEMBLY__ */
-#endif /* ASM_X86__LGUEST_HCALL_H */
diff --git a/include/asm-x86/linkage.h b/include/asm-x86/linkage.h
deleted file mode 100644
index 42d8b62..0000000
--- a/include/asm-x86/linkage.h
+++ /dev/null
@@ -1,61 +0,0 @@
-#ifndef ASM_X86__LINKAGE_H
-#define ASM_X86__LINKAGE_H
-
-#undef notrace
-#define notrace __attribute__((no_instrument_function))
-
-#ifdef CONFIG_X86_64
-#define __ALIGN .p2align 4,,15
-#define __ALIGN_STR ".p2align 4,,15"
-#endif
-
-#ifdef CONFIG_X86_32
-#define asmlinkage CPP_ASMLINKAGE __attribute__((regparm(0)))
-/*
- * For 32-bit UML - mark functions implemented in assembly that use
- * regparm input parameters:
- */
-#define asmregparm __attribute__((regparm(3)))
-
-/*
- * Make sure the compiler doesn't do anything stupid with the
- * arguments on the stack - they are owned by the *caller*, not
- * the callee. This just fools gcc into not spilling into them,
- * and keeps it from doing tailcall recursion and/or using the
- * stack slots for temporaries, since they are live and "used"
- * all the way to the end of the function.
- *
- * NOTE! On x86-64, all the arguments are in registers, so this
- * only matters on a 32-bit kernel.
- */
-#define asmlinkage_protect(n, ret, args...) \
-	__asmlinkage_protect##n(ret, ##args)
-#define __asmlinkage_protect_n(ret, args...) \
-	__asm__ __volatile__ ("" : "=r" (ret) : "0" (ret), ##args)
-#define __asmlinkage_protect0(ret) \
-	__asmlinkage_protect_n(ret)
-#define __asmlinkage_protect1(ret, arg1) \
-	__asmlinkage_protect_n(ret, "g" (arg1))
-#define __asmlinkage_protect2(ret, arg1, arg2) \
-	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2))
-#define __asmlinkage_protect3(ret, arg1, arg2, arg3) \
-	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3))
-#define __asmlinkage_protect4(ret, arg1, arg2, arg3, arg4) \
-	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
-			      "g" (arg4))
-#define __asmlinkage_protect5(ret, arg1, arg2, arg3, arg4, arg5) \
-	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
-			      "g" (arg4), "g" (arg5))
-#define __asmlinkage_protect6(ret, arg1, arg2, arg3, arg4, arg5, arg6) \
-	__asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
-			      "g" (arg4), "g" (arg5), "g" (arg6))
-
-#endif
-
-#ifdef CONFIG_X86_ALIGNMENT_16
-#define __ALIGN .align 16,0x90
-#define __ALIGN_STR ".align 16,0x90"
-#endif
-
-#endif /* ASM_X86__LINKAGE_H */
-
diff --git a/include/asm-x86/local.h b/include/asm-x86/local.h
deleted file mode 100644
index ae91994..0000000
--- a/include/asm-x86/local.h
+++ /dev/null
@@ -1,235 +0,0 @@
-#ifndef ASM_X86__LOCAL_H
-#define ASM_X86__LOCAL_H
-
-#include <linux/percpu.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <asm/asm.h>
-
-typedef struct {
-	atomic_long_t a;
-} local_t;
-
-#define LOCAL_INIT(i)	{ ATOMIC_LONG_INIT(i) }
-
-#define local_read(l)	atomic_long_read(&(l)->a)
-#define local_set(l, i)	atomic_long_set(&(l)->a, (i))
-
-static inline void local_inc(local_t *l)
-{
-	asm volatile(_ASM_INC "%0"
-		     : "+m" (l->a.counter));
-}
-
-static inline void local_dec(local_t *l)
-{
-	asm volatile(_ASM_DEC "%0"
-		     : "+m" (l->a.counter));
-}
-
-static inline void local_add(long i, local_t *l)
-{
-	asm volatile(_ASM_ADD "%1,%0"
-		     : "+m" (l->a.counter)
-		     : "ir" (i));
-}
-
-static inline void local_sub(long i, local_t *l)
-{
-	asm volatile(_ASM_SUB "%1,%0"
-		     : "+m" (l->a.counter)
-		     : "ir" (i));
-}
-
-/**
- * local_sub_and_test - subtract value from variable and test result
- * @i: integer value to subtract
- * @l: pointer to type local_t
- *
- * Atomically subtracts @i from @l and returns
- * true if the result is zero, or false for all
- * other cases.
- */
-static inline int local_sub_and_test(long i, local_t *l)
-{
-	unsigned char c;
-
-	asm volatile(_ASM_SUB "%2,%0; sete %1"
-		     : "+m" (l->a.counter), "=qm" (c)
-		     : "ir" (i) : "memory");
-	return c;
-}
-
-/**
- * local_dec_and_test - decrement and test
- * @l: pointer to type local_t
- *
- * Atomically decrements @l by 1 and
- * returns true if the result is 0, or false for all other
- * cases.
- */
-static inline int local_dec_and_test(local_t *l)
-{
-	unsigned char c;
-
-	asm volatile(_ASM_DEC "%0; sete %1"
-		     : "+m" (l->a.counter), "=qm" (c)
-		     : : "memory");
-	return c != 0;
-}
-
-/**
- * local_inc_and_test - increment and test
- * @l: pointer to type local_t
- *
- * Atomically increments @l by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-static inline int local_inc_and_test(local_t *l)
-{
-	unsigned char c;
-
-	asm volatile(_ASM_INC "%0; sete %1"
-		     : "+m" (l->a.counter), "=qm" (c)
-		     : : "memory");
-	return c != 0;
-}
-
-/**
- * local_add_negative - add and test if negative
- * @i: integer value to add
- * @l: pointer to type local_t
- *
- * Atomically adds @i to @l and returns true
- * if the result is negative, or false when
- * result is greater than or equal to zero.
- */
-static inline int local_add_negative(long i, local_t *l)
-{
-	unsigned char c;
-
-	asm volatile(_ASM_ADD "%2,%0; sets %1"
-		     : "+m" (l->a.counter), "=qm" (c)
-		     : "ir" (i) : "memory");
-	return c;
-}
-
-/**
- * local_add_return - add and return
- * @i: integer value to add
- * @l: pointer to type local_t
- *
- * Atomically adds @i to @l and returns @i + @l
- */
-static inline long local_add_return(long i, local_t *l)
-{
-	long __i;
-#ifdef CONFIG_M386
-	unsigned long flags;
-	if (unlikely(boot_cpu_data.x86 <= 3))
-		goto no_xadd;
-#endif
-	/* Modern 486+ processor */
-	__i = i;
-	asm volatile(_ASM_XADD "%0, %1;"
-		     : "+r" (i), "+m" (l->a.counter)
-		     : : "memory");
-	return i + __i;
-
-#ifdef CONFIG_M386
-no_xadd: /* Legacy 386 processor */
-	local_irq_save(flags);
-	__i = local_read(l);
-	local_set(l, i + __i);
-	local_irq_restore(flags);
-	return i + __i;
-#endif
-}
-
-static inline long local_sub_return(long i, local_t *l)
-{
-	return local_add_return(-i, l);
-}
-
-#define local_inc_return(l)  (local_add_return(1, l))
-#define local_dec_return(l)  (local_sub_return(1, l))
-
-#define local_cmpxchg(l, o, n) \
-	(cmpxchg_local(&((l)->a.counter), (o), (n)))
-/* Always has a lock prefix */
-#define local_xchg(l, n) (xchg(&((l)->a.counter), (n)))
-
-/**
- * local_add_unless - add unless the number is a given value
- * @l: pointer of type local_t
- * @a: the amount to add to l...
- * @u: ...unless l is equal to u.
- *
- * Atomically adds @a to @l, so long as it was not @u.
- * Returns non-zero if @l was not @u, and zero otherwise.
- */
-#define local_add_unless(l, a, u)				\
-({								\
-	long c, old;						\
-	c = local_read((l));					\
-	for (;;) {						\
-		if (unlikely(c == (u)))				\
-			break;					\
-		old = local_cmpxchg((l), c, c + (a));		\
-		if (likely(old == c))				\
-			break;					\
-		c = old;					\
-	}							\
-	c != (u);						\
-})
-#define local_inc_not_zero(l) local_add_unless((l), 1, 0)
-
-/* On x86_32, these are no better than the atomic variants.
- * On x86-64 these are better than the atomic variants on SMP kernels
- * because they dont use a lock prefix.
- */
-#define __local_inc(l)		local_inc(l)
-#define __local_dec(l)		local_dec(l)
-#define __local_add(i, l)	local_add((i), (l))
-#define __local_sub(i, l)	local_sub((i), (l))
-
-/* Use these for per-cpu local_t variables: on some archs they are
- * much more efficient than these naive implementations.  Note they take
- * a variable, not an address.
- *
- * X86_64: This could be done better if we moved the per cpu data directly
- * after GS.
- */
-
-/* Need to disable preemption for the cpu local counters otherwise we could
-   still access a variable of a previous CPU in a non atomic way. */
-#define cpu_local_wrap_v(l)		\
-({					\
-	local_t res__;			\
-	preempt_disable(); 		\
-	res__ = (l);			\
-	preempt_enable();		\
-	res__;				\
-})
-#define cpu_local_wrap(l)		\
-({					\
-	preempt_disable();		\
-	(l);				\
-	preempt_enable();		\
-})					\
-
-#define cpu_local_read(l)    cpu_local_wrap_v(local_read(&__get_cpu_var((l))))
-#define cpu_local_set(l, i)  cpu_local_wrap(local_set(&__get_cpu_var((l)), (i)))
-#define cpu_local_inc(l)     cpu_local_wrap(local_inc(&__get_cpu_var((l))))
-#define cpu_local_dec(l)     cpu_local_wrap(local_dec(&__get_cpu_var((l))))
-#define cpu_local_add(i, l)  cpu_local_wrap(local_add((i), &__get_cpu_var((l))))
-#define cpu_local_sub(i, l)  cpu_local_wrap(local_sub((i), &__get_cpu_var((l))))
-
-#define __cpu_local_inc(l)	cpu_local_inc((l))
-#define __cpu_local_dec(l)	cpu_local_dec((l))
-#define __cpu_local_add(i, l)	cpu_local_add((i), (l))
-#define __cpu_local_sub(i, l)	cpu_local_sub((i), (l))
-
-#endif /* ASM_X86__LOCAL_H */
diff --git a/include/asm-x86/mach-default/apm.h b/include/asm-x86/mach-default/apm.h
deleted file mode 100644
index 2aa61b5..0000000
--- a/include/asm-x86/mach-default/apm.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- *  Machine specific APM BIOS functions for generic.
- *  Split out from apm.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-
-#ifndef ASM_X86__MACH_DEFAULT__APM_H
-#define ASM_X86__MACH_DEFAULT__APM_H
-
-#ifdef APM_ZERO_SEGS
-#	define APM_DO_ZERO_SEGS \
-		"pushl %%ds\n\t" \
-		"pushl %%es\n\t" \
-		"xorl %%edx, %%edx\n\t" \
-		"mov %%dx, %%ds\n\t" \
-		"mov %%dx, %%es\n\t" \
-		"mov %%dx, %%fs\n\t" \
-		"mov %%dx, %%gs\n\t"
-#	define APM_DO_POP_SEGS \
-		"popl %%es\n\t" \
-		"popl %%ds\n\t"
-#else
-#	define APM_DO_ZERO_SEGS
-#	define APM_DO_POP_SEGS
-#endif
-
-static inline void apm_bios_call_asm(u32 func, u32 ebx_in, u32 ecx_in,
-					u32 *eax, u32 *ebx, u32 *ecx,
-					u32 *edx, u32 *esi)
-{
-	/*
-	 * N.B. We do NOT need a cld after the BIOS call
-	 * because we always save and restore the flags.
-	 */
-	__asm__ __volatile__(APM_DO_ZERO_SEGS
-		"pushl %%edi\n\t"
-		"pushl %%ebp\n\t"
-		"lcall *%%cs:apm_bios_entry\n\t"
-		"setc %%al\n\t"
-		"popl %%ebp\n\t"
-		"popl %%edi\n\t"
-		APM_DO_POP_SEGS
-		: "=a" (*eax), "=b" (*ebx), "=c" (*ecx), "=d" (*edx),
-		  "=S" (*esi)
-		: "a" (func), "b" (ebx_in), "c" (ecx_in)
-		: "memory", "cc");
-}
-
-static inline u8 apm_bios_call_simple_asm(u32 func, u32 ebx_in,
-						u32 ecx_in, u32 *eax)
-{
-	int	cx, dx, si;
-	u8	error;
-
-	/*
-	 * N.B. We do NOT need a cld after the BIOS call
-	 * because we always save and restore the flags.
-	 */
-	__asm__ __volatile__(APM_DO_ZERO_SEGS
-		"pushl %%edi\n\t"
-		"pushl %%ebp\n\t"
-		"lcall *%%cs:apm_bios_entry\n\t"
-		"setc %%bl\n\t"
-		"popl %%ebp\n\t"
-		"popl %%edi\n\t"
-		APM_DO_POP_SEGS
-		: "=a" (*eax), "=b" (error), "=c" (cx), "=d" (dx),
-		  "=S" (si)
-		: "a" (func), "b" (ebx_in), "c" (ecx_in)
-		: "memory", "cc");
-	return error;
-}
-
-#endif /* ASM_X86__MACH_DEFAULT__APM_H */
diff --git a/include/asm-x86/mach-default/mach_apic.h b/include/asm-x86/mach-default/mach_apic.h
deleted file mode 100644
index 3c66f2c..0000000
--- a/include/asm-x86/mach-default/mach_apic.h
+++ /dev/null
@@ -1,156 +0,0 @@
-#ifndef ASM_X86__MACH_DEFAULT__MACH_APIC_H
-#define ASM_X86__MACH_DEFAULT__MACH_APIC_H
-
-#ifdef CONFIG_X86_LOCAL_APIC
-
-#include <mach_apicdef.h>
-#include <asm/smp.h>
-
-#define APIC_DFR_VALUE	(APIC_DFR_FLAT)
-
-static inline cpumask_t target_cpus(void)
-{ 
-#ifdef CONFIG_SMP
-	return cpu_online_map;
-#else
-	return cpumask_of_cpu(0);
-#endif
-} 
-
-#define NO_BALANCE_IRQ (0)
-#define esr_disable (0)
-
-#ifdef CONFIG_X86_64
-#include <asm/genapic.h>
-#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
-#define INT_DEST_MODE (genapic->int_dest_mode)
-#define TARGET_CPUS	  (genapic->target_cpus())
-#define apic_id_registered (genapic->apic_id_registered)
-#define init_apic_ldr (genapic->init_apic_ldr)
-#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
-#define phys_pkg_id	(genapic->phys_pkg_id)
-#define vector_allocation_domain    (genapic->vector_allocation_domain)
-#define read_apic_id()  (GET_APIC_ID(apic_read(APIC_ID)))
-#define send_IPI_self (genapic->send_IPI_self)
-extern void setup_apic_routing(void);
-#else
-#define INT_DELIVERY_MODE dest_LowestPrio
-#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
-#define TARGET_CPUS (target_cpus())
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static inline void init_apic_ldr(void)
-{
-	unsigned long val;
-
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
-	apic_write(APIC_LDR, val);
-}
-
-static inline int apic_id_registered(void)
-{
-	return physid_isset(read_apic_id(), phys_cpu_present_map);
-}
-
-static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
-{
-	return cpus_addr(cpumask)[0];
-}
-
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-static inline void setup_apic_routing(void)
-{
-#ifdef CONFIG_X86_IO_APIC
-	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
-					"Flat", nr_ioapics);
-#endif
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
-#ifdef CONFIG_SMP
-	return apicid_2_node[hard_smp_processor_id()];
-#else
-	return 0;
-#endif
-}
-
-static inline cpumask_t vector_allocation_domain(int cpu)
-{
-        /* Careful. Some cpus do not strictly honor the set of cpus
-         * specified in the interrupt destination when using lowest
-         * priority interrupt delivery mode.
-         *
-         * In particular there was a hyperthreading cpu observed to
-         * deliver interrupts to the wrong hyperthread when only one
-         * hyperthread was specified in the interrupt desitination.
-         */
-        cpumask_t domain = { { [0] = APIC_ALL_CPUS, } };
-        return domain;
-}
-#endif
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return physid_isset(apicid, bitmap);
-}
-
-static inline unsigned long check_apicid_present(int bit)
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	return phys_map;
-}
-
-static inline int multi_timer_check(int apic, int irq)
-{
-	return 0;
-}
-
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
-	return 1 << cpu;
-}
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < NR_CPUS && cpu_present(mps_cpu))
-		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
-	else
-		return BAD_APICID;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
-{
-	return physid_mask_of_physid(phys_apicid);
-}
-
-static inline void setup_portio_remap(void)
-{
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-#endif /* CONFIG_X86_LOCAL_APIC */
-#endif /* ASM_X86__MACH_DEFAULT__MACH_APIC_H */
diff --git a/include/asm-x86/mach-default/mach_apicdef.h b/include/asm-x86/mach-default/mach_apicdef.h
deleted file mode 100644
index 0c2d41c..0000000
--- a/include/asm-x86/mach-default/mach_apicdef.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef ASM_X86__MACH_DEFAULT__MACH_APICDEF_H
-#define ASM_X86__MACH_DEFAULT__MACH_APICDEF_H
-
-#include <asm/apic.h>
-
-#ifdef CONFIG_X86_64
-#define	APIC_ID_MASK		(genapic->apic_id_mask)
-#define GET_APIC_ID(x)		(genapic->get_apic_id(x))
-#define	SET_APIC_ID(x)		(genapic->set_apic_id(x))
-#else
-#define		APIC_ID_MASK		(0xF<<24)
-static inline unsigned get_apic_id(unsigned long x) 
-{
-	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
-	if (APIC_XAPIC(ver))
-		return (((x)>>24)&0xFF);
-	else
-		return (((x)>>24)&0xF);
-} 
-
-#define		GET_APIC_ID(x)	get_apic_id(x)
-#endif
-
-#endif /* ASM_X86__MACH_DEFAULT__MACH_APICDEF_H */
diff --git a/include/asm-x86/mach-default/mach_ipi.h b/include/asm-x86/mach-default/mach_ipi.h
deleted file mode 100644
index 674bc7e..0000000
--- a/include/asm-x86/mach-default/mach_ipi.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef ASM_X86__MACH_DEFAULT__MACH_IPI_H
-#define ASM_X86__MACH_DEFAULT__MACH_IPI_H
-
-/* Avoid include hell */
-#define NMI_VECTOR 0x02
-
-void send_IPI_mask_bitmask(cpumask_t mask, int vector);
-void __send_IPI_shortcut(unsigned int shortcut, int vector);
-
-extern int no_broadcast;
-
-#ifdef CONFIG_X86_64
-#include <asm/genapic.h>
-#define send_IPI_mask (genapic->send_IPI_mask)
-#else
-static inline void send_IPI_mask(cpumask_t mask, int vector)
-{
-	send_IPI_mask_bitmask(mask, vector);
-}
-#endif
-
-static inline void __local_send_IPI_allbutself(int vector)
-{
-	if (no_broadcast || vector == NMI_VECTOR) {
-		cpumask_t mask = cpu_online_map;
-
-		cpu_clear(smp_processor_id(), mask);
-		send_IPI_mask(mask, vector);
-	} else
-		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector);
-}
-
-static inline void __local_send_IPI_all(int vector)
-{
-	if (no_broadcast || vector == NMI_VECTOR)
-		send_IPI_mask(cpu_online_map, vector);
-	else
-		__send_IPI_shortcut(APIC_DEST_ALLINC, vector);
-}
-
-#ifdef CONFIG_X86_64
-#define send_IPI_allbutself (genapic->send_IPI_allbutself)
-#define send_IPI_all (genapic->send_IPI_all)
-#else
-static inline void send_IPI_allbutself(int vector)
-{
-	/*
-	 * if there are no other CPUs in the system then we get an APIC send 
-	 * error if we try to broadcast, thus avoid sending IPIs in this case.
-	 */
-	if (!(num_online_cpus() > 1))
-		return;
-
-	__local_send_IPI_allbutself(vector);
-	return;
-}
-
-static inline void send_IPI_all(int vector)
-{
-	__local_send_IPI_all(vector);
-}
-#endif
-
-#endif /* ASM_X86__MACH_DEFAULT__MACH_IPI_H */
diff --git a/include/asm-x86/mach-default/mach_mpparse.h b/include/asm-x86/mach-default/mach_mpparse.h
deleted file mode 100644
index 9c381f2..0000000
--- a/include/asm-x86/mach-default/mach_mpparse.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef ASM_X86__MACH_DEFAULT__MACH_MPPARSE_H
-#define ASM_X86__MACH_DEFAULT__MACH_MPPARSE_H
-
-static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, 
-		char *productid)
-{
-	return 0;
-}
-
-/* Hook from generic ACPI tables.c */
-static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	return 0;
-}
-
-
-#endif /* ASM_X86__MACH_DEFAULT__MACH_MPPARSE_H */
diff --git a/include/asm-x86/mach-default/mach_mpspec.h b/include/asm-x86/mach-default/mach_mpspec.h
deleted file mode 100644
index d77646f..0000000
--- a/include/asm-x86/mach-default/mach_mpspec.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASM_X86__MACH_DEFAULT__MACH_MPSPEC_H
-#define ASM_X86__MACH_DEFAULT__MACH_MPSPEC_H
-
-#define MAX_IRQ_SOURCES 256
-
-#if CONFIG_BASE_SMALL == 0
-#define MAX_MP_BUSSES 256
-#else
-#define MAX_MP_BUSSES 32
-#endif
-
-#endif /* ASM_X86__MACH_DEFAULT__MACH_MPSPEC_H */
diff --git a/include/asm-x86/mach-default/mach_timer.h b/include/asm-x86/mach-default/mach_timer.h
deleted file mode 100644
index 990b158..0000000
--- a/include/asm-x86/mach-default/mach_timer.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  Machine specific calibrate_tsc() for generic.
- *  Split out from timer_tsc.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-/* ------ Calibrate the TSC ------- 
- * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
- * Too much 64-bit arithmetic here to do this cleanly in C, and for
- * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
- * output busy loop as low as possible. We avoid reading the CTC registers
- * directly because of the awkward 8-bit access mechanism of the 82C54
- * device.
- */
-#ifndef ASM_X86__MACH_DEFAULT__MACH_TIMER_H
-#define ASM_X86__MACH_DEFAULT__MACH_TIMER_H
-
-#define CALIBRATE_TIME_MSEC 30 /* 30 msecs */
-#define CALIBRATE_LATCH	\
-	((CLOCK_TICK_RATE * CALIBRATE_TIME_MSEC + 1000/2)/1000)
-
-static inline void mach_prepare_counter(void)
-{
-       /* Set the Gate high, disable speaker */
-	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
-	/*
-	 * Now let's take care of CTC channel 2
-	 *
-	 * Set the Gate high, program CTC channel 2 for mode 0,
-	 * (interrupt on terminal count mode), binary count,
-	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
-	 *
-	 * Some devices need a delay here.
-	 */
-	outb(0xb0, 0x43);			/* binary, mode 0, LSB/MSB, Ch 2 */
-	outb_p(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
-	outb_p(CALIBRATE_LATCH >> 8, 0x42);       /* MSB of count */
-}
-
-static inline void mach_countup(unsigned long *count_p)
-{
-	unsigned long count = 0;
-	do {
-		count++;
-	} while ((inb_p(0x61) & 0x20) == 0);
-	*count_p = count;
-}
-
-#endif /* ASM_X86__MACH_DEFAULT__MACH_TIMER_H */
diff --git a/include/asm-x86/mach-default/mach_traps.h b/include/asm-x86/mach-default/mach_traps.h
deleted file mode 100644
index ff8778f..0000000
--- a/include/asm-x86/mach-default/mach_traps.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  Machine specific NMI handling for generic.
- *  Split out from traps.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-#ifndef ASM_X86__MACH_DEFAULT__MACH_TRAPS_H
-#define ASM_X86__MACH_DEFAULT__MACH_TRAPS_H
-
-#include <asm/mc146818rtc.h>
-
-static inline unsigned char get_nmi_reason(void)
-{
-	return inb(0x61);
-}
-
-static inline void reassert_nmi(void)
-{
-	int old_reg = -1;
-
-	if (do_i_have_lock_cmos())
-		old_reg = current_lock_cmos_reg();
-	else
-		lock_cmos(0); /* register doesn't matter here */
-	outb(0x8f, 0x70);
-	inb(0x71);		/* dummy */
-	outb(0x0f, 0x70);
-	inb(0x71);		/* dummy */
-	if (old_reg >= 0)
-		outb(old_reg, 0x70);
-	else
-		unlock_cmos();
-}
-
-#endif /* ASM_X86__MACH_DEFAULT__MACH_TRAPS_H */
diff --git a/include/asm-x86/mach-default/mach_wakecpu.h b/include/asm-x86/mach-default/mach_wakecpu.h
deleted file mode 100644
index 361b810..0000000
--- a/include/asm-x86/mach-default/mach_wakecpu.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef ASM_X86__MACH_DEFAULT__MACH_WAKECPU_H
-#define ASM_X86__MACH_DEFAULT__MACH_WAKECPU_H
-
-/* 
- * This file copes with machines that wakeup secondary CPUs by the
- * INIT, INIT, STARTUP sequence.
- */
-
-#define WAKE_SECONDARY_VIA_INIT
-
-#define TRAMPOLINE_LOW phys_to_virt(0x467)
-#define TRAMPOLINE_HIGH phys_to_virt(0x469)
-
-#define boot_cpu_apicid boot_cpu_physical_apicid
-
-static inline void wait_for_init_deassert(atomic_t *deassert)
-{
-	while (!atomic_read(deassert))
-		cpu_relax();
-	return;
-}
-
-/* Nothing to do for most platforms, since cleared by the INIT cycle */
-static inline void smp_callin_clear_local_apic(void)
-{
-}
-
-static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
-{
-}
-
-static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
-{
-}
-
-#if APIC_DEBUG
- #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
-#else
- #define inquire_remote_apic(apicid) {}
-#endif
-
-#endif /* ASM_X86__MACH_DEFAULT__MACH_WAKECPU_H */
diff --git a/include/asm-x86/mach-generic/gpio.h b/include/asm-x86/mach-generic/gpio.h
deleted file mode 100644
index 6ce0f77..0000000
--- a/include/asm-x86/mach-generic/gpio.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef ASM_X86__MACH_GENERIC__GPIO_H
-#define ASM_X86__MACH_GENERIC__GPIO_H
-
-int gpio_request(unsigned gpio, const char *label);
-void gpio_free(unsigned gpio);
-int gpio_direction_input(unsigned gpio);
-int gpio_direction_output(unsigned gpio, int value);
-int gpio_get_value(unsigned gpio);
-void gpio_set_value(unsigned gpio, int value);
-int gpio_to_irq(unsigned gpio);
-int irq_to_gpio(unsigned irq);
-
-#include <asm-generic/gpio.h>           /* cansleep wrappers */
-
-#endif /* ASM_X86__MACH_GENERIC__GPIO_H */
diff --git a/include/asm-x86/mach-generic/mach_apic.h b/include/asm-x86/mach-generic/mach_apic.h
deleted file mode 100644
index 5085b52..0000000
--- a/include/asm-x86/mach-generic/mach_apic.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef ASM_X86__MACH_GENERIC__MACH_APIC_H
-#define ASM_X86__MACH_GENERIC__MACH_APIC_H
-
-#include <asm/genapic.h>
-
-#define esr_disable (genapic->ESR_DISABLE)
-#define NO_BALANCE_IRQ (genapic->no_balance_irq)
-#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
-#define INT_DEST_MODE (genapic->int_dest_mode)
-#undef APIC_DEST_LOGICAL
-#define APIC_DEST_LOGICAL (genapic->apic_destination_logical)
-#define TARGET_CPUS	  (genapic->target_cpus())
-#define apic_id_registered (genapic->apic_id_registered)
-#define init_apic_ldr (genapic->init_apic_ldr)
-#define ioapic_phys_id_map (genapic->ioapic_phys_id_map)
-#define setup_apic_routing (genapic->setup_apic_routing)
-#define multi_timer_check (genapic->multi_timer_check)
-#define apicid_to_node (genapic->apicid_to_node)
-#define cpu_to_logical_apicid (genapic->cpu_to_logical_apicid) 
-#define cpu_present_to_apicid (genapic->cpu_present_to_apicid)
-#define apicid_to_cpu_present (genapic->apicid_to_cpu_present)
-#define setup_portio_remap (genapic->setup_portio_remap)
-#define check_apicid_present (genapic->check_apicid_present)
-#define check_phys_apicid_present (genapic->check_phys_apicid_present)
-#define check_apicid_used (genapic->check_apicid_used)
-#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
-#define vector_allocation_domain (genapic->vector_allocation_domain)
-#define enable_apic_mode (genapic->enable_apic_mode)
-#define phys_pkg_id (genapic->phys_pkg_id)
-
-extern void generic_bigsmp_probe(void);
-
-#endif /* ASM_X86__MACH_GENERIC__MACH_APIC_H */
diff --git a/include/asm-x86/mach-generic/mach_apicdef.h b/include/asm-x86/mach-generic/mach_apicdef.h
deleted file mode 100644
index 1657f38..0000000
--- a/include/asm-x86/mach-generic/mach_apicdef.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef ASM_X86__MACH_GENERIC__MACH_APICDEF_H
-#define ASM_X86__MACH_GENERIC__MACH_APICDEF_H
-
-#ifndef APIC_DEFINITION
-#include <asm/genapic.h>
-
-#define GET_APIC_ID (genapic->get_apic_id)
-#define APIC_ID_MASK (genapic->apic_id_mask)
-#endif
-
-#endif /* ASM_X86__MACH_GENERIC__MACH_APICDEF_H */
diff --git a/include/asm-x86/mach-generic/mach_ipi.h b/include/asm-x86/mach-generic/mach_ipi.h
deleted file mode 100644
index f67433d..0000000
--- a/include/asm-x86/mach-generic/mach_ipi.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef ASM_X86__MACH_GENERIC__MACH_IPI_H
-#define ASM_X86__MACH_GENERIC__MACH_IPI_H
-
-#include <asm/genapic.h>
-
-#define send_IPI_mask (genapic->send_IPI_mask)
-#define send_IPI_allbutself (genapic->send_IPI_allbutself)
-#define send_IPI_all (genapic->send_IPI_all)
-
-#endif /* ASM_X86__MACH_GENERIC__MACH_IPI_H */
diff --git a/include/asm-x86/mach-generic/mach_mpparse.h b/include/asm-x86/mach-generic/mach_mpparse.h
deleted file mode 100644
index 3115564..0000000
--- a/include/asm-x86/mach-generic/mach_mpparse.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef ASM_X86__MACH_GENERIC__MACH_MPPARSE_H
-#define ASM_X86__MACH_GENERIC__MACH_MPPARSE_H
-
-
-extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
-			 char *productid);
-
-extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
-
-#endif /* ASM_X86__MACH_GENERIC__MACH_MPPARSE_H */
diff --git a/include/asm-x86/mach-generic/mach_mpspec.h b/include/asm-x86/mach-generic/mach_mpspec.h
deleted file mode 100644
index 6061b15..0000000
--- a/include/asm-x86/mach-generic/mach_mpspec.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASM_X86__MACH_GENERIC__MACH_MPSPEC_H
-#define ASM_X86__MACH_GENERIC__MACH_MPSPEC_H
-
-#define MAX_IRQ_SOURCES 256
-
-/* Summit or generic (i.e. installer) kernels need lots of bus entries. */
-/* Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets. */
-#define MAX_MP_BUSSES 260
-
-extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
-				char *productid);
-#endif /* ASM_X86__MACH_GENERIC__MACH_MPSPEC_H */
diff --git a/include/asm-x86/mach-rdc321x/gpio.h b/include/asm-x86/mach-rdc321x/gpio.h
deleted file mode 100644
index 94b6cdf..0000000
--- a/include/asm-x86/mach-rdc321x/gpio.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef ASM_X86__MACH_RDC321X__GPIO_H
-#define ASM_X86__MACH_RDC321X__GPIO_H
-
-#include <linux/kernel.h>
-
-extern int rdc_gpio_get_value(unsigned gpio);
-extern void rdc_gpio_set_value(unsigned gpio, int value);
-extern int rdc_gpio_direction_input(unsigned gpio);
-extern int rdc_gpio_direction_output(unsigned gpio, int value);
-extern int rdc_gpio_request(unsigned gpio, const char *label);
-extern void rdc_gpio_free(unsigned gpio);
-extern void __init rdc321x_gpio_setup(void);
-
-/* Wrappers for the arch-neutral GPIO API */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return rdc_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	might_sleep();
-	rdc_gpio_free(gpio);
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-	return rdc_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	return rdc_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return rdc_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	rdc_gpio_set_value(gpio, value);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq;
-}
-
-/* For cansleep */
-#include <asm-generic/gpio.h>
-
-#endif /* ASM_X86__MACH_RDC321X__GPIO_H */
diff --git a/include/asm-x86/math_emu.h b/include/asm-x86/math_emu.h
deleted file mode 100644
index 5768d8e..0000000
--- a/include/asm-x86/math_emu.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef ASM_X86__MATH_EMU_H
-#define ASM_X86__MATH_EMU_H
-
-/* This structure matches the layout of the data saved to the stack
-   following a device-not-present interrupt, part of it saved
-   automatically by the 80386/80486.
-   */
-struct info {
-	long ___orig_eip;
-	long ___ebx;
-	long ___ecx;
-	long ___edx;
-	long ___esi;
-	long ___edi;
-	long ___ebp;
-	long ___eax;
-	long ___ds;
-	long ___es;
-	long ___fs;
-	long ___orig_eax;
-	long ___eip;
-	long ___cs;
-	long ___eflags;
-	long ___esp;
-	long ___ss;
-	long ___vm86_es; /* This and the following only in vm86 mode */
-	long ___vm86_ds;
-	long ___vm86_fs;
-	long ___vm86_gs;
-};
-#endif /* ASM_X86__MATH_EMU_H */
diff --git a/include/asm-x86/mc146818rtc.h b/include/asm-x86/mc146818rtc.h
deleted file mode 100644
index a995f33..0000000
--- a/include/asm-x86/mc146818rtc.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef ASM_X86__MC146818RTC_H
-#define ASM_X86__MC146818RTC_H
-
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/processor.h>
-#include <linux/mc146818rtc.h>
-
-#ifndef RTC_PORT
-#define RTC_PORT(x)	(0x70 + (x))
-#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
-#endif
-
-#if defined(CONFIG_X86_32) && defined(__HAVE_ARCH_CMPXCHG)
-/*
- * This lock provides nmi access to the CMOS/RTC registers.  It has some
- * special properties.  It is owned by a CPU and stores the index register
- * currently being accessed (if owned).  The idea here is that it works
- * like a normal lock (normally).  However, in an NMI, the NMI code will
- * first check to see if its CPU owns the lock, meaning that the NMI
- * interrupted during the read/write of the device.  If it does, it goes ahead
- * and performs the access and then restores the index register.  If it does
- * not, it locks normally.
- *
- * Note that since we are working with NMIs, we need this lock even in
- * a non-SMP machine just to mark that the lock is owned.
- *
- * This only works with compare-and-swap.  There is no other way to
- * atomically claim the lock and set the owner.
- */
-#include <linux/smp.h>
-extern volatile unsigned long cmos_lock;
-
-/*
- * All of these below must be called with interrupts off, preempt
- * disabled, etc.
- */
-
-static inline void lock_cmos(unsigned char reg)
-{
-	unsigned long new;
-	new = ((smp_processor_id() + 1) << 8) | reg;
-	for (;;) {
-		if (cmos_lock) {
-			cpu_relax();
-			continue;
-		}
-		if (__cmpxchg(&cmos_lock, 0, new, sizeof(cmos_lock)) == 0)
-			return;
-	}
-}
-
-static inline void unlock_cmos(void)
-{
-	cmos_lock = 0;
-}
-
-static inline int do_i_have_lock_cmos(void)
-{
-	return (cmos_lock >> 8) == (smp_processor_id() + 1);
-}
-
-static inline unsigned char current_lock_cmos_reg(void)
-{
-	return cmos_lock & 0xff;
-}
-
-#define lock_cmos_prefix(reg)			\
-	do {					\
-		unsigned long cmos_flags;	\
-		local_irq_save(cmos_flags);	\
-		lock_cmos(reg)
-
-#define lock_cmos_suffix(reg)			\
-	unlock_cmos();				\
-	local_irq_restore(cmos_flags);		\
-	} while (0)
-#else
-#define lock_cmos_prefix(reg) do {} while (0)
-#define lock_cmos_suffix(reg) do {} while (0)
-#define lock_cmos(reg)
-#define unlock_cmos()
-#define do_i_have_lock_cmos() 0
-#define current_lock_cmos_reg() 0
-#endif
-
-/*
- * The yet supported machines all access the RTC index register via
- * an ISA port access but the way to access the date register differs ...
- */
-#define CMOS_READ(addr) rtc_cmos_read(addr)
-#define CMOS_WRITE(val, addr) rtc_cmos_write(val, addr)
-unsigned char rtc_cmos_read(unsigned char addr);
-void rtc_cmos_write(unsigned char val, unsigned char addr);
-
-extern int mach_set_rtc_mmss(unsigned long nowtime);
-extern unsigned long mach_get_cmos_time(void);
-
-#define RTC_IRQ 8
-
-#endif /* ASM_X86__MC146818RTC_H */
diff --git a/include/asm-x86/mca.h b/include/asm-x86/mca.h
deleted file mode 100644
index 60d1ed2..0000000
--- a/include/asm-x86/mca.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Platform specific MCA defines */
-#ifndef ASM_X86__MCA_H
-#define ASM_X86__MCA_H
-
-/* Maximal number of MCA slots - actually, some machines have less, but
- * they all have sufficient number of POS registers to cover 8.
- */
-#define MCA_MAX_SLOT_NR  8
-
-/* Most machines have only one MCA bus.  The only multiple bus machines
- * I know have at most two */
-#define MAX_MCA_BUSSES 2
-
-#define MCA_PRIMARY_BUS		0
-#define MCA_SECONDARY_BUS	1
-
-/* Dummy slot numbers on primary MCA for integrated functions */
-#define MCA_INTEGSCSI	(MCA_MAX_SLOT_NR)
-#define MCA_INTEGVIDEO	(MCA_MAX_SLOT_NR+1)
-#define MCA_MOTHERBOARD (MCA_MAX_SLOT_NR+2)
-
-/* Dummy POS values for integrated functions */
-#define MCA_DUMMY_POS_START	0x10000
-#define MCA_INTEGSCSI_POS	(MCA_DUMMY_POS_START+1)
-#define MCA_INTEGVIDEO_POS	(MCA_DUMMY_POS_START+2)
-#define MCA_MOTHERBOARD_POS	(MCA_DUMMY_POS_START+3)
-
-/* MCA registers */
-
-#define MCA_MOTHERBOARD_SETUP_REG	0x94
-#define MCA_ADAPTER_SETUP_REG		0x96
-#define MCA_POS_REG(n)			(0x100+(n))
-
-#define MCA_ENABLED	0x01	/* POS 2, set if adapter enabled */
-
-/* Max number of adapters, including both slots and various integrated
- * things.
- */
-#define MCA_NUMADAPTERS (MCA_MAX_SLOT_NR+3)
-
-#endif /* ASM_X86__MCA_H */
diff --git a/include/asm-x86/mca_dma.h b/include/asm-x86/mca_dma.h
deleted file mode 100644
index 49f22be..0000000
--- a/include/asm-x86/mca_dma.h
+++ /dev/null
@@ -1,201 +0,0 @@
-#ifndef ASM_X86__MCA_DMA_H
-#define ASM_X86__MCA_DMA_H
-
-#include <asm/io.h>
-#include <linux/ioport.h>
-
-/*
- * Microchannel specific DMA stuff.  DMA on an MCA machine is fairly similar to
- *   standard PC dma, but it certainly has its quirks.  DMA register addresses
- *   are in a different place and there are some added functions.  Most of this
- *   should be pretty obvious on inspection.  Note that the user must divide
- *   count by 2 when using 16-bit dma; that is not handled by these functions.
- *
- * Ramen Noodles are yummy.
- *
- *  1998 Tymm Twillman <tymm@computer.org>
- */
-
-/*
- * Registers that are used by the DMA controller; FN is the function register
- *   (tell the controller what to do) and EXE is the execution register (how
- *   to do it)
- */
-
-#define MCA_DMA_REG_FN  0x18
-#define MCA_DMA_REG_EXE 0x1A
-
-/*
- * Functions that the DMA controller can do
- */
-
-#define MCA_DMA_FN_SET_IO       0x00
-#define MCA_DMA_FN_SET_ADDR     0x20
-#define MCA_DMA_FN_GET_ADDR     0x30
-#define MCA_DMA_FN_SET_COUNT    0x40
-#define MCA_DMA_FN_GET_COUNT    0x50
-#define MCA_DMA_FN_GET_STATUS   0x60
-#define MCA_DMA_FN_SET_MODE     0x70
-#define MCA_DMA_FN_SET_ARBUS    0x80
-#define MCA_DMA_FN_MASK         0x90
-#define MCA_DMA_FN_RESET_MASK   0xA0
-#define MCA_DMA_FN_MASTER_CLEAR 0xD0
-
-/*
- * Modes (used by setting MCA_DMA_FN_MODE in the function register)
- *
- * Note that the MODE_READ is read from memory (write to device), and
- *   MODE_WRITE is vice-versa.
- */
-
-#define MCA_DMA_MODE_XFER  0x04  /* read by default */
-#define MCA_DMA_MODE_READ  0x04  /* same as XFER */
-#define MCA_DMA_MODE_WRITE 0x08  /* OR with MODE_XFER to use */
-#define MCA_DMA_MODE_IO    0x01  /* DMA from IO register */
-#define MCA_DMA_MODE_16    0x40  /* 16 bit xfers */
-
-
-/**
- *	mca_enable_dma	-	channel to enable DMA on
- *	@dmanr: DMA channel
- *
- *	Enable the MCA bus DMA on a channel. This can be called from
- *	IRQ context.
- */
-
-static inline void mca_enable_dma(unsigned int dmanr)
-{
-	outb(MCA_DMA_FN_RESET_MASK | dmanr, MCA_DMA_REG_FN);
-}
-
-/**
- *	mca_disble_dma	-	channel to disable DMA on
- *	@dmanr: DMA channel
- *
- *	Enable the MCA bus DMA on a channel. This can be called from
- *	IRQ context.
- */
-
-static inline void mca_disable_dma(unsigned int dmanr)
-{
-	outb(MCA_DMA_FN_MASK | dmanr, MCA_DMA_REG_FN);
-}
-
-/**
- *	mca_set_dma_addr -	load a 24bit DMA address
- *	@dmanr: DMA channel
- *	@a: 24bit bus address
- *
- *	Load the address register in the DMA controller. This has a 24bit
- *	limitation (16Mb).
- */
-
-static inline void mca_set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-	outb(MCA_DMA_FN_SET_ADDR | dmanr, MCA_DMA_REG_FN);
-	outb(a & 0xff, MCA_DMA_REG_EXE);
-	outb((a >> 8) & 0xff, MCA_DMA_REG_EXE);
-	outb((a >> 16) & 0xff, MCA_DMA_REG_EXE);
-}
-
-/**
- *	mca_get_dma_addr -	load a 24bit DMA address
- *	@dmanr: DMA channel
- *
- *	Read the address register in the DMA controller. This has a 24bit
- *	limitation (16Mb). The return is a bus address.
- */
-
-static inline unsigned int mca_get_dma_addr(unsigned int dmanr)
-{
-	unsigned int addr;
-
-	outb(MCA_DMA_FN_GET_ADDR | dmanr, MCA_DMA_REG_FN);
-	addr = inb(MCA_DMA_REG_EXE);
-	addr |= inb(MCA_DMA_REG_EXE) << 8;
-	addr |= inb(MCA_DMA_REG_EXE) << 16;
-
-	return addr;
-}
-
-/**
- *	mca_set_dma_count -	load a 16bit transfer count
- *	@dmanr: DMA channel
- *	@count: count
- *
- *	Set the DMA count for this channel. This can be up to 64Kbytes.
- *	Setting a count of zero will not do what you expect.
- */
-
-static inline void mca_set_dma_count(unsigned int dmanr, unsigned int count)
-{
-	count--;  /* transfers one more than count -- correct for this */
-
-	outb(MCA_DMA_FN_SET_COUNT | dmanr, MCA_DMA_REG_FN);
-	outb(count & 0xff, MCA_DMA_REG_EXE);
-	outb((count >> 8) & 0xff, MCA_DMA_REG_EXE);
-}
-
-/**
- *	mca_get_dma_residue -	get the remaining bytes to transfer
- *	@dmanr: DMA channel
- *
- *	This function returns the number of bytes left to transfer
- *	on this DMA channel.
- */
-
-static inline unsigned int mca_get_dma_residue(unsigned int dmanr)
-{
-	unsigned short count;
-
-	outb(MCA_DMA_FN_GET_COUNT | dmanr, MCA_DMA_REG_FN);
-	count = 1 + inb(MCA_DMA_REG_EXE);
-	count += inb(MCA_DMA_REG_EXE) << 8;
-
-	return count;
-}
-
-/**
- *	mca_set_dma_io -	set the port for an I/O transfer
- *	@dmanr: DMA channel
- *	@io_addr: an I/O port number
- *
- *	Unlike the ISA bus DMA controllers the DMA on MCA bus can transfer
- *	with an I/O port target.
- */
-
-static inline void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr)
-{
-	/*
-	 * DMA from a port address -- set the io address
-	 */
-
-	outb(MCA_DMA_FN_SET_IO | dmanr, MCA_DMA_REG_FN);
-	outb(io_addr & 0xff, MCA_DMA_REG_EXE);
-	outb((io_addr >>  8) & 0xff, MCA_DMA_REG_EXE);
-}
-
-/**
- *	mca_set_dma_mode -	set the DMA mode
- *	@dmanr: DMA channel
- *	@mode: mode to set
- *
- *	The DMA controller supports several modes. The mode values you can
- *	set are-
- *
- *	%MCA_DMA_MODE_READ when reading from the DMA device.
- *
- *	%MCA_DMA_MODE_WRITE to writing to the DMA device.
- *
- *	%MCA_DMA_MODE_IO to do DMA to or from an I/O port.
- *
- *	%MCA_DMA_MODE_16 to do 16bit transfers.
- */
-
-static inline void mca_set_dma_mode(unsigned int dmanr, unsigned int mode)
-{
-	outb(MCA_DMA_FN_SET_MODE | dmanr, MCA_DMA_REG_FN);
-	outb(mode, MCA_DMA_REG_EXE);
-}
-
-#endif /* ASM_X86__MCA_DMA_H */
diff --git a/include/asm-x86/mce.h b/include/asm-x86/mce.h
deleted file mode 100644
index 036133e..0000000
--- a/include/asm-x86/mce.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef ASM_X86__MCE_H
-#define ASM_X86__MCE_H
-
-#ifdef __x86_64__
-
-#include <asm/ioctls.h>
-#include <asm/types.h>
-
-/*
- * Machine Check support for x86
- */
-
-#define MCG_CTL_P	 (1UL<<8)   /* MCG_CAP register available */
-
-#define MCG_STATUS_RIPV  (1UL<<0)   /* restart ip valid */
-#define MCG_STATUS_EIPV  (1UL<<1)   /* ip points to correct instruction */
-#define MCG_STATUS_MCIP  (1UL<<2)   /* machine check in progress */
-
-#define MCI_STATUS_VAL   (1UL<<63)  /* valid error */
-#define MCI_STATUS_OVER  (1UL<<62)  /* previous errors lost */
-#define MCI_STATUS_UC    (1UL<<61)  /* uncorrected error */
-#define MCI_STATUS_EN    (1UL<<60)  /* error enabled */
-#define MCI_STATUS_MISCV (1UL<<59)  /* misc error reg. valid */
-#define MCI_STATUS_ADDRV (1UL<<58)  /* addr reg. valid */
-#define MCI_STATUS_PCC   (1UL<<57)  /* processor context corrupt */
-
-/* Fields are zero when not available */
-struct mce {
-	__u64 status;
-	__u64 misc;
-	__u64 addr;
-	__u64 mcgstatus;
-	__u64 ip;
-	__u64 tsc;	/* cpu time stamp counter */
-	__u64 res1;	/* for future extension */
-	__u64 res2;	/* dito. */
-	__u8  cs;		/* code segment */
-	__u8  bank;	/* machine check bank */
-	__u8  cpu;	/* cpu that raised the error */
-	__u8  finished;   /* entry is valid */
-	__u32 pad;
-};
-
-/*
- * This structure contains all data related to the MCE log.  Also
- * carries a signature to make it easier to find from external
- * debugging tools.  Each entry is only valid when its finished flag
- * is set.
- */
-
-#define MCE_LOG_LEN 32
-
-struct mce_log {
-	char signature[12]; /* "MACHINECHECK" */
-	unsigned len;	    /* = MCE_LOG_LEN */
-	unsigned next;
-	unsigned flags;
-	unsigned pad0;
-	struct mce entry[MCE_LOG_LEN];
-};
-
-#define MCE_OVERFLOW 0		/* bit 0 in flags means overflow */
-
-#define MCE_LOG_SIGNATURE	"MACHINECHECK"
-
-#define MCE_GET_RECORD_LEN   _IOR('M', 1, int)
-#define MCE_GET_LOG_LEN      _IOR('M', 2, int)
-#define MCE_GETCLEAR_FLAGS   _IOR('M', 3, int)
-
-/* Software defined banks */
-#define MCE_EXTENDED_BANK	128
-#define MCE_THERMAL_BANK	MCE_EXTENDED_BANK + 0
-
-#define K8_MCE_THRESHOLD_BASE      (MCE_EXTENDED_BANK + 1)      /* MCE_AMD */
-#define K8_MCE_THRESHOLD_BANK_0    (MCE_THRESHOLD_BASE + 0 * 9)
-#define K8_MCE_THRESHOLD_BANK_1    (MCE_THRESHOLD_BASE + 1 * 9)
-#define K8_MCE_THRESHOLD_BANK_2    (MCE_THRESHOLD_BASE + 2 * 9)
-#define K8_MCE_THRESHOLD_BANK_3    (MCE_THRESHOLD_BASE + 3 * 9)
-#define K8_MCE_THRESHOLD_BANK_4    (MCE_THRESHOLD_BASE + 4 * 9)
-#define K8_MCE_THRESHOLD_BANK_5    (MCE_THRESHOLD_BASE + 5 * 9)
-#define K8_MCE_THRESHOLD_DRAM_ECC  (MCE_THRESHOLD_BANK_4 + 0)
-
-#endif /* __x86_64__ */
-
-#ifdef __KERNEL__
-
-#ifdef CONFIG_X86_32
-extern int mce_disabled;
-#else /* CONFIG_X86_32 */
-
-#include <asm/atomic.h>
-
-void mce_log(struct mce *m);
-DECLARE_PER_CPU(struct sys_device, device_mce);
-extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
-
-#ifdef CONFIG_X86_MCE_INTEL
-void mce_intel_feature_init(struct cpuinfo_x86 *c);
-#else
-static inline void mce_intel_feature_init(struct cpuinfo_x86 *c) { }
-#endif
-
-#ifdef CONFIG_X86_MCE_AMD
-void mce_amd_feature_init(struct cpuinfo_x86 *c);
-#else
-static inline void mce_amd_feature_init(struct cpuinfo_x86 *c) { }
-#endif
-
-void mce_log_therm_throt_event(unsigned int cpu, __u64 status);
-
-extern atomic_t mce_entry;
-
-extern void do_machine_check(struct pt_regs *, long);
-extern int mce_notify_user(void);
-
-#endif /* !CONFIG_X86_32 */
-
-
-
-#ifdef CONFIG_X86_MCE
-extern void mcheck_init(struct cpuinfo_x86 *c);
-#else
-#define mcheck_init(c) do { } while (0)
-#endif
-extern void stop_mce(void);
-extern void restart_mce(void);
-
-#endif /* __KERNEL__ */
-
-#endif /* ASM_X86__MCE_H */
diff --git a/include/asm-x86/microcode.h b/include/asm-x86/microcode.h
deleted file mode 100644
index 62c793b..0000000
--- a/include/asm-x86/microcode.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef ASM_X86__MICROCODE_H
-#define ASM_X86__MICROCODE_H
-
-struct cpu_signature {
-	unsigned int sig;
-	unsigned int pf;
-	unsigned int rev;
-};
-
-struct device;
-
-struct microcode_ops {
-	int  (*request_microcode_user) (int cpu, const void __user *buf, size_t size);
-	int  (*request_microcode_fw) (int cpu, struct device *device);
-
-	void (*apply_microcode) (int cpu);
-
-	int  (*collect_cpu_info) (int cpu, struct cpu_signature *csig);
-	void (*microcode_fini_cpu) (int cpu);
-};
-
-struct ucode_cpu_info {
-	struct cpu_signature cpu_sig;
-	int valid;
-	void *mc;
-};
-extern struct ucode_cpu_info ucode_cpu_info[];
-
-#ifdef CONFIG_MICROCODE_INTEL
-extern struct microcode_ops * __init init_intel_microcode(void);
-#else
-static inline struct microcode_ops * __init init_intel_microcode(void)
-{
-	return NULL;
-}
-#endif /* CONFIG_MICROCODE_INTEL */
-
-#ifdef CONFIG_MICROCODE_AMD
-extern struct microcode_ops * __init init_amd_microcode(void);
-#else
-static inline struct microcode_ops * __init init_amd_microcode(void)
-{
-	return NULL;
-}
-#endif
-
-#endif /* ASM_X86__MICROCODE_H */
diff --git a/include/asm-x86/mman.h b/include/asm-x86/mman.h
deleted file mode 100644
index 4ef28e6..0000000
--- a/include/asm-x86/mman.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef ASM_X86__MMAN_H
-#define ASM_X86__MMAN_H
-
-#include <asm-generic/mman.h>
-
-#define MAP_32BIT	0x40		/* only give out 32bit addresses */
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* ASM_X86__MMAN_H */
diff --git a/include/asm-x86/mmconfig.h b/include/asm-x86/mmconfig.h
deleted file mode 100644
index fb79b1c..0000000
--- a/include/asm-x86/mmconfig.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASM_X86__MMCONFIG_H
-#define ASM_X86__MMCONFIG_H
-
-#ifdef CONFIG_PCI_MMCONFIG
-extern void __cpuinit fam10h_check_enable_mmcfg(void);
-extern void __cpuinit check_enable_amd_mmconf_dmi(void);
-#else
-static inline void fam10h_check_enable_mmcfg(void) { }
-static inline void check_enable_amd_mmconf_dmi(void) { }
-#endif
-
-#endif /* ASM_X86__MMCONFIG_H */
diff --git a/include/asm-x86/mmu.h b/include/asm-x86/mmu.h
deleted file mode 100644
index 9d5aff1..0000000
--- a/include/asm-x86/mmu.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef ASM_X86__MMU_H
-#define ASM_X86__MMU_H
-
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-
-/*
- * The x86 doesn't have a mmu context, but
- * we put the segment information here.
- */
-typedef struct {
-	void *ldt;
-	int size;
-	struct mutex lock;
-	void *vdso;
-} mm_context_t;
-
-#ifdef CONFIG_SMP
-void leave_mm(int cpu);
-#else
-static inline void leave_mm(int cpu)
-{
-}
-#endif
-
-#endif /* ASM_X86__MMU_H */
diff --git a/include/asm-x86/mmu_context.h b/include/asm-x86/mmu_context.h
deleted file mode 100644
index 8ec940b..0000000
--- a/include/asm-x86/mmu_context.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef ASM_X86__MMU_CONTEXT_H
-#define ASM_X86__MMU_CONTEXT_H
-
-#include <asm/desc.h>
-#include <asm/atomic.h>
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-#include <asm/paravirt.h>
-#ifndef CONFIG_PARAVIRT
-#include <asm-generic/mm_hooks.h>
-
-static inline void paravirt_activate_mm(struct mm_struct *prev,
-					struct mm_struct *next)
-{
-}
-#endif	/* !CONFIG_PARAVIRT */
-
-/*
- * Used for LDT copy/destruction.
- */
-int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
-void destroy_context(struct mm_struct *mm);
-
-#ifdef CONFIG_X86_32
-# include "mmu_context_32.h"
-#else
-# include "mmu_context_64.h"
-#endif
-
-#define activate_mm(prev, next)			\
-do {						\
-	paravirt_activate_mm((prev), (next));	\
-	switch_mm((prev), (next), NULL);	\
-} while (0);
-
-
-#endif /* ASM_X86__MMU_CONTEXT_H */
diff --git a/include/asm-x86/mmu_context_32.h b/include/asm-x86/mmu_context_32.h
deleted file mode 100644
index cce6f6e..0000000
--- a/include/asm-x86/mmu_context_32.h
+++ /dev/null
@@ -1,56 +0,0 @@
-#ifndef ASM_X86__MMU_CONTEXT_32_H
-#define ASM_X86__MMU_CONTEXT_32_H
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-#ifdef CONFIG_SMP
-	unsigned cpu = smp_processor_id();
-	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK)
-		per_cpu(cpu_tlbstate, cpu).state = TLBSTATE_LAZY;
-#endif
-}
-
-static inline void switch_mm(struct mm_struct *prev,
-			     struct mm_struct *next,
-			     struct task_struct *tsk)
-{
-	int cpu = smp_processor_id();
-
-	if (likely(prev != next)) {
-		/* stop flush ipis for the previous mm */
-		cpu_clear(cpu, prev->cpu_vm_mask);
-#ifdef CONFIG_SMP
-		per_cpu(cpu_tlbstate, cpu).state = TLBSTATE_OK;
-		per_cpu(cpu_tlbstate, cpu).active_mm = next;
-#endif
-		cpu_set(cpu, next->cpu_vm_mask);
-
-		/* Re-load page tables */
-		load_cr3(next->pgd);
-
-		/*
-		 * load the LDT, if the LDT is different:
-		 */
-		if (unlikely(prev->context.ldt != next->context.ldt))
-			load_LDT_nolock(&next->context);
-	}
-#ifdef CONFIG_SMP
-	else {
-		per_cpu(cpu_tlbstate, cpu).state = TLBSTATE_OK;
-		BUG_ON(per_cpu(cpu_tlbstate, cpu).active_mm != next);
-
-		if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
-			/* We were in lazy tlb mode and leave_mm disabled
-			 * tlb flush IPI delivery. We must reload %cr3.
-			 */
-			load_cr3(next->pgd);
-			load_LDT_nolock(&next->context);
-		}
-	}
-#endif
-}
-
-#define deactivate_mm(tsk, mm)			\
-	asm("movl %0,%%gs": :"r" (0));
-
-#endif /* ASM_X86__MMU_CONTEXT_32_H */
diff --git a/include/asm-x86/mmu_context_64.h b/include/asm-x86/mmu_context_64.h
deleted file mode 100644
index 2675867..0000000
--- a/include/asm-x86/mmu_context_64.h
+++ /dev/null
@@ -1,54 +0,0 @@
-#ifndef ASM_X86__MMU_CONTEXT_64_H
-#define ASM_X86__MMU_CONTEXT_64_H
-
-#include <asm/pda.h>
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-#ifdef CONFIG_SMP
-	if (read_pda(mmu_state) == TLBSTATE_OK)
-		write_pda(mmu_state, TLBSTATE_LAZY);
-#endif
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-			     struct task_struct *tsk)
-{
-	unsigned cpu = smp_processor_id();
-	if (likely(prev != next)) {
-		/* stop flush ipis for the previous mm */
-		cpu_clear(cpu, prev->cpu_vm_mask);
-#ifdef CONFIG_SMP
-		write_pda(mmu_state, TLBSTATE_OK);
-		write_pda(active_mm, next);
-#endif
-		cpu_set(cpu, next->cpu_vm_mask);
-		load_cr3(next->pgd);
-
-		if (unlikely(next->context.ldt != prev->context.ldt))
-			load_LDT_nolock(&next->context);
-	}
-#ifdef CONFIG_SMP
-	else {
-		write_pda(mmu_state, TLBSTATE_OK);
-		if (read_pda(active_mm) != next)
-			BUG();
-		if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
-			/* We were in lazy tlb mode and leave_mm disabled
-			 * tlb flush IPI delivery. We must reload CR3
-			 * to make sure to use no freed page tables.
-			 */
-			load_cr3(next->pgd);
-			load_LDT_nolock(&next->context);
-		}
-	}
-#endif
-}
-
-#define deactivate_mm(tsk, mm)			\
-do {						\
-	load_gs_index(0);			\
-	asm volatile("movl %0,%%fs"::"r"(0));	\
-} while (0)
-
-#endif /* ASM_X86__MMU_CONTEXT_64_H */
diff --git a/include/asm-x86/mmx.h b/include/asm-x86/mmx.h
deleted file mode 100644
index 2e7299b..0000000
--- a/include/asm-x86/mmx.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef ASM_X86__MMX_H
-#define ASM_X86__MMX_H
-
-/*
- *	MMX 3Dnow! helper operations
- */
-
-#include <linux/types.h>
-
-extern void *_mmx_memcpy(void *to, const void *from, size_t size);
-extern void mmx_clear_page(void *page);
-extern void mmx_copy_page(void *to, void *from);
-
-#endif /* ASM_X86__MMX_H */
diff --git a/include/asm-x86/mmzone_32.h b/include/asm-x86/mmzone_32.h
deleted file mode 100644
index 121b65d..0000000
--- a/include/asm-x86/mmzone_32.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Written by Pat Gaughen (gone@us.ibm.com) Mar 2002
- *
- */
-
-#ifndef ASM_X86__MMZONE_32_H
-#define ASM_X86__MMZONE_32_H
-
-#include <asm/smp.h>
-
-#ifdef CONFIG_NUMA
-extern struct pglist_data *node_data[];
-#define NODE_DATA(nid)	(node_data[nid])
-
-#include <asm/numaq.h>
-/* summit or generic arch */
-#include <asm/srat.h>
-
-extern int get_memcfg_numa_flat(void);
-/*
- * This allows any one NUMA architecture to be compiled
- * for, and still fall back to the flat function if it
- * fails.
- */
-static inline void get_memcfg_numa(void)
-{
-
-	if (get_memcfg_numaq())
-		return;
-	if (get_memcfg_from_srat())
-		return;
-	get_memcfg_numa_flat();
-}
-
-extern int early_pfn_to_nid(unsigned long pfn);
-
-#else /* !CONFIG_NUMA */
-
-#define get_memcfg_numa get_memcfg_numa_flat
-
-#endif /* CONFIG_NUMA */
-
-#ifdef CONFIG_DISCONTIGMEM
-
-/*
- * generic node memory support, the following assumptions apply:
- *
- * 1) memory comes in 64Mb contigious chunks which are either present or not
- * 2) we will not have more than 64Gb in total
- *
- * for now assume that 64Gb is max amount of RAM for whole system
- *    64Gb / 4096bytes/page = 16777216 pages
- */
-#define MAX_NR_PAGES 16777216
-#define MAX_ELEMENTS 1024
-#define PAGES_PER_ELEMENT (MAX_NR_PAGES/MAX_ELEMENTS)
-
-extern s8 physnode_map[];
-
-static inline int pfn_to_nid(unsigned long pfn)
-{
-#ifdef CONFIG_NUMA
-	return((int) physnode_map[(pfn) / PAGES_PER_ELEMENT]);
-#else
-	return 0;
-#endif
-}
-
-/*
- * Following are macros that each numa implmentation must define.
- */
-
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)						\
-({									\
-	pg_data_t *__pgdat = NODE_DATA(nid);				\
-	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
-})
-
-static inline int pfn_valid(int pfn)
-{
-	int nid = pfn_to_nid(pfn);
-
-	if (nid >= 0)
-		return (pfn < node_end_pfn(nid));
-	return 0;
-}
-
-#endif /* CONFIG_DISCONTIGMEM */
-
-#ifdef CONFIG_NEED_MULTIPLE_NODES
-
-/*
- * Following are macros that are specific to this numa platform.
- */
-#define reserve_bootmem(addr, size, flags) \
-	reserve_bootmem_node(NODE_DATA(0), (addr), (size), (flags))
-#define alloc_bootmem(x) \
-	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
-#define alloc_bootmem_nopanic(x) \
-	__alloc_bootmem_node_nopanic(NODE_DATA(0), (x), SMP_CACHE_BYTES, \
-				__pa(MAX_DMA_ADDRESS))
-#define alloc_bootmem_low(x) \
-	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, 0)
-#define alloc_bootmem_pages(x) \
-	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
-#define alloc_bootmem_pages_nopanic(x) \
-	__alloc_bootmem_node_nopanic(NODE_DATA(0), (x), PAGE_SIZE, \
-				__pa(MAX_DMA_ADDRESS))
-#define alloc_bootmem_low_pages(x) \
-	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0)
-#define alloc_bootmem_node(pgdat, x)					\
-({									\
-	struct pglist_data  __maybe_unused			\
-				*__alloc_bootmem_node__pgdat = (pgdat);	\
-	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES,	\
-						__pa(MAX_DMA_ADDRESS));	\
-})
-#define alloc_bootmem_pages_node(pgdat, x)				\
-({									\
-	struct pglist_data  __maybe_unused			\
-				*__alloc_bootmem_node__pgdat = (pgdat);	\
-	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE,		\
-						__pa(MAX_DMA_ADDRESS));	\
-})
-#define alloc_bootmem_low_pages_node(pgdat, x)				\
-({									\
-	struct pglist_data  __maybe_unused			\
-				*__alloc_bootmem_node__pgdat = (pgdat);	\
-	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0);		\
-})
-#endif /* CONFIG_NEED_MULTIPLE_NODES */
-
-#endif /* ASM_X86__MMZONE_32_H */
diff --git a/include/asm-x86/mmzone_64.h b/include/asm-x86/mmzone_64.h
deleted file mode 100644
index 6480f33..0000000
--- a/include/asm-x86/mmzone_64.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* K8 NUMA support */
-/* Copyright 2002,2003 by Andi Kleen, SuSE Labs */
-/* 2.5 Version loosely based on the NUMAQ Code by Pat Gaughen. */
-#ifndef ASM_X86__MMZONE_64_H
-#define ASM_X86__MMZONE_64_H
-
-
-#ifdef CONFIG_NUMA
-
-#include <linux/mmdebug.h>
-
-#include <asm/smp.h>
-
-/* Simple perfect hash to map physical addresses to node numbers */
-struct memnode {
-	int shift;
-	unsigned int mapsize;
-	s16 *map;
-	s16 embedded_map[64 - 8];
-} ____cacheline_aligned; /* total size = 128 bytes */
-extern struct memnode memnode;
-#define memnode_shift memnode.shift
-#define memnodemap memnode.map
-#define memnodemapsize memnode.mapsize
-
-extern struct pglist_data *node_data[];
-
-static inline __attribute__((pure)) int phys_to_nid(unsigned long addr)
-{
-	unsigned nid;
-	VIRTUAL_BUG_ON(!memnodemap);
-	nid = memnodemap[addr >> memnode_shift];
-	VIRTUAL_BUG_ON(nid >= MAX_NUMNODES || !node_data[nid]);
-	return nid;
-}
-
-#define NODE_DATA(nid)		(node_data[nid])
-
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)       (NODE_DATA(nid)->node_start_pfn +	\
-				 NODE_DATA(nid)->node_spanned_pages)
-
-extern int early_pfn_to_nid(unsigned long pfn);
-
-#ifdef CONFIG_NUMA_EMU
-#define FAKE_NODE_MIN_SIZE	(64 * 1024 * 1024)
-#define FAKE_NODE_MIN_HASH_MASK	(~(FAKE_NODE_MIN_SIZE - 1UL))
-#endif
-
-#endif
-#endif /* ASM_X86__MMZONE_64_H */
diff --git a/include/asm-x86/module.h b/include/asm-x86/module.h
deleted file mode 100644
index 864f200..0000000
--- a/include/asm-x86/module.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef ASM_X86__MODULE_H
-#define ASM_X86__MODULE_H
-
-/* x86_32/64 are simple */
-struct mod_arch_specific {};
-
-#ifdef CONFIG_X86_32
-# define Elf_Shdr Elf32_Shdr
-# define Elf_Sym Elf32_Sym
-# define Elf_Ehdr Elf32_Ehdr
-#else
-# define Elf_Shdr Elf64_Shdr
-# define Elf_Sym Elf64_Sym
-# define Elf_Ehdr Elf64_Ehdr
-#endif
-
-#ifdef CONFIG_X86_64
-/* X86_64 does not define MODULE_PROC_FAMILY */
-#elif defined CONFIG_M386
-#define MODULE_PROC_FAMILY "386 "
-#elif defined CONFIG_M486
-#define MODULE_PROC_FAMILY "486 "
-#elif defined CONFIG_M586
-#define MODULE_PROC_FAMILY "586 "
-#elif defined CONFIG_M586TSC
-#define MODULE_PROC_FAMILY "586TSC "
-#elif defined CONFIG_M586MMX
-#define MODULE_PROC_FAMILY "586MMX "
-#elif defined CONFIG_MCORE2
-#define MODULE_PROC_FAMILY "CORE2 "
-#elif defined CONFIG_M686
-#define MODULE_PROC_FAMILY "686 "
-#elif defined CONFIG_MPENTIUMII
-#define MODULE_PROC_FAMILY "PENTIUMII "
-#elif defined CONFIG_MPENTIUMIII
-#define MODULE_PROC_FAMILY "PENTIUMIII "
-#elif defined CONFIG_MPENTIUMM
-#define MODULE_PROC_FAMILY "PENTIUMM "
-#elif defined CONFIG_MPENTIUM4
-#define MODULE_PROC_FAMILY "PENTIUM4 "
-#elif defined CONFIG_MK6
-#define MODULE_PROC_FAMILY "K6 "
-#elif defined CONFIG_MK7
-#define MODULE_PROC_FAMILY "K7 "
-#elif defined CONFIG_MK8
-#define MODULE_PROC_FAMILY "K8 "
-#elif defined CONFIG_X86_ELAN
-#define MODULE_PROC_FAMILY "ELAN "
-#elif defined CONFIG_MCRUSOE
-#define MODULE_PROC_FAMILY "CRUSOE "
-#elif defined CONFIG_MEFFICEON
-#define MODULE_PROC_FAMILY "EFFICEON "
-#elif defined CONFIG_MWINCHIPC6
-#define MODULE_PROC_FAMILY "WINCHIPC6 "
-#elif defined CONFIG_MWINCHIP3D
-#define MODULE_PROC_FAMILY "WINCHIP3D "
-#elif defined CONFIG_MCYRIXIII
-#define MODULE_PROC_FAMILY "CYRIXIII "
-#elif defined CONFIG_MVIAC3_2
-#define MODULE_PROC_FAMILY "VIAC3-2 "
-#elif defined CONFIG_MVIAC7
-#define MODULE_PROC_FAMILY "VIAC7 "
-#elif defined CONFIG_MGEODEGX1
-#define MODULE_PROC_FAMILY "GEODEGX1 "
-#elif defined CONFIG_MGEODE_LX
-#define MODULE_PROC_FAMILY "GEODE "
-#else
-#error unknown processor family
-#endif
-
-#ifdef CONFIG_X86_32
-# ifdef CONFIG_4KSTACKS
-#  define MODULE_STACKSIZE "4KSTACKS "
-# else
-#  define MODULE_STACKSIZE ""
-# endif
-# define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY MODULE_STACKSIZE
-#endif
-
-#endif /* ASM_X86__MODULE_H */
diff --git a/include/asm-x86/mpspec.h b/include/asm-x86/mpspec.h
deleted file mode 100644
index be2241a..0000000
--- a/include/asm-x86/mpspec.h
+++ /dev/null
@@ -1,145 +0,0 @@
-#ifndef ASM_X86__MPSPEC_H
-#define ASM_X86__MPSPEC_H
-
-#include <linux/init.h>
-
-#include <asm/mpspec_def.h>
-
-extern int apic_version[MAX_APICS];
-
-#ifdef CONFIG_X86_32
-#include <mach_mpspec.h>
-
-extern unsigned int def_to_bigsmp;
-extern u8 apicid_2_node[];
-extern int pic_mode;
-
-#ifdef CONFIG_X86_NUMAQ
-extern int mp_bus_id_to_node[MAX_MP_BUSSES];
-extern int mp_bus_id_to_local[MAX_MP_BUSSES];
-extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
-#endif
-
-#define MAX_APICID 256
-
-#else
-
-#define MAX_MP_BUSSES 256
-/* Each PCI slot may be a combo card with its own bus.  4 IRQ pins per slot. */
-#define MAX_IRQ_SOURCES (MAX_MP_BUSSES * 4)
-
-#endif
-
-extern void early_find_smp_config(void);
-extern void early_get_smp_config(void);
-
-#if defined(CONFIG_MCA) || defined(CONFIG_EISA)
-extern int mp_bus_id_to_type[MAX_MP_BUSSES];
-#endif
-
-extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-
-extern unsigned int boot_cpu_physical_apicid;
-extern unsigned int max_physical_apicid;
-extern int smp_found_config;
-extern int mpc_default_type;
-extern unsigned long mp_lapic_addr;
-
-extern void find_smp_config(void);
-extern void get_smp_config(void);
-#ifdef CONFIG_X86_MPPARSE
-extern void early_reserve_e820_mpc_new(void);
-#else
-static inline void early_reserve_e820_mpc_new(void) { }
-#endif
-
-void __cpuinit generic_processor_info(int apicid, int version);
-#ifdef CONFIG_ACPI
-extern void mp_register_ioapic(int id, u32 address, u32 gsi_base);
-extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
-				   u32 gsi);
-extern void mp_config_acpi_legacy_irqs(void);
-extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low);
-#ifdef CONFIG_X86_IO_APIC
-extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
-				u32 gsi, int triggering, int polarity);
-#else
-static inline int
-mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
-		   u32 gsi, int triggering, int polarity)
-{
-	return 0;
-}
-#endif
-#endif /* CONFIG_ACPI */
-
-#define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_APICS)
-
-struct physid_mask {
-	unsigned long mask[PHYSID_ARRAY_SIZE];
-};
-
-typedef struct physid_mask physid_mask_t;
-
-#define physid_set(physid, map)			set_bit(physid, (map).mask)
-#define physid_clear(physid, map)		clear_bit(physid, (map).mask)
-#define physid_isset(physid, map)		test_bit(physid, (map).mask)
-#define physid_test_and_set(physid, map)			\
-	test_and_set_bit(physid, (map).mask)
-
-#define physids_and(dst, src1, src2)					\
-	bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
-
-#define physids_or(dst, src1, src2)					\
-	bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
-
-#define physids_clear(map)					\
-	bitmap_zero((map).mask, MAX_APICS)
-
-#define physids_complement(dst, src)				\
-	bitmap_complement((dst).mask, (src).mask, MAX_APICS)
-
-#define physids_empty(map)					\
-	bitmap_empty((map).mask, MAX_APICS)
-
-#define physids_equal(map1, map2)				\
-	bitmap_equal((map1).mask, (map2).mask, MAX_APICS)
-
-#define physids_weight(map)					\
-	bitmap_weight((map).mask, MAX_APICS)
-
-#define physids_shift_right(d, s, n)				\
-	bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS)
-
-#define physids_shift_left(d, s, n)				\
-	bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS)
-
-#define physids_coerce(map)			((map).mask[0])
-
-#define physids_promote(physids)					\
-	({								\
-		physid_mask_t __physid_mask = PHYSID_MASK_NONE;		\
-		__physid_mask.mask[0] = physids;			\
-		__physid_mask;						\
-	})
-
-/* Note: will create very large stack frames if physid_mask_t is big */
-#define physid_mask_of_physid(physid)					\
-	({								\
-		physid_mask_t __physid_mask = PHYSID_MASK_NONE;		\
-		physid_set(physid, __physid_mask);			\
-		__physid_mask;						\
-	})
-
-static inline void physid_set_mask_of_physid(int physid, physid_mask_t *map)
-{
-	physids_clear(*map);
-	physid_set(physid, *map);
-}
-
-#define PHYSID_MASK_ALL		{ {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} }
-#define PHYSID_MASK_NONE	{ {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} }
-
-extern physid_mask_t phys_cpu_present_map;
-
-#endif /* ASM_X86__MPSPEC_H */
diff --git a/include/asm-x86/mpspec_def.h b/include/asm-x86/mpspec_def.h
deleted file mode 100644
index 79166b0..0000000
--- a/include/asm-x86/mpspec_def.h
+++ /dev/null
@@ -1,180 +0,0 @@
-#ifndef ASM_X86__MPSPEC_DEF_H
-#define ASM_X86__MPSPEC_DEF_H
-
-/*
- * Structure definitions for SMP machines following the
- * Intel Multiprocessing Specification 1.1 and 1.4.
- */
-
-/*
- * This tag identifies where the SMP configuration
- * information is.
- */
-
-#define SMP_MAGIC_IDENT	(('_'<<24) | ('P'<<16) | ('M'<<8) | '_')
-
-#ifdef CONFIG_X86_32
-# define MAX_MPC_ENTRY 1024
-# define MAX_APICS      256
-#else
-# if NR_CPUS <= 255
-#  define MAX_APICS     255
-# else
-#  define MAX_APICS   32768
-# endif
-#endif
-
-struct intel_mp_floating {
-	char mpf_signature[4];		/* "_MP_"			*/
-	unsigned int mpf_physptr;	/* Configuration table address	*/
-	unsigned char mpf_length;	/* Our length (paragraphs)	*/
-	unsigned char mpf_specification;/* Specification version	*/
-	unsigned char mpf_checksum;	/* Checksum (makes sum 0)	*/
-	unsigned char mpf_feature1;	/* Standard or configuration ?	*/
-	unsigned char mpf_feature2;	/* Bit7 set for IMCR|PIC	*/
-	unsigned char mpf_feature3;	/* Unused (0)			*/
-	unsigned char mpf_feature4;	/* Unused (0)			*/
-	unsigned char mpf_feature5;	/* Unused (0)			*/
-};
-
-#define MPC_SIGNATURE "PCMP"
-
-struct mp_config_table {
-	char mpc_signature[4];
-	unsigned short mpc_length;	/* Size of table */
-	char mpc_spec;			/* 0x01 */
-	char mpc_checksum;
-	char mpc_oem[8];
-	char mpc_productid[12];
-	unsigned int mpc_oemptr;	/* 0 if not present */
-	unsigned short mpc_oemsize;	/* 0 if not present */
-	unsigned short mpc_oemcount;
-	unsigned int mpc_lapic;	/* APIC address */
-	unsigned int reserved;
-};
-
-/* Followed by entries */
-
-#define	MP_PROCESSOR		0
-#define	MP_BUS			1
-#define	MP_IOAPIC		2
-#define	MP_INTSRC		3
-#define	MP_LINTSRC		4
-/* Used by IBM NUMA-Q to describe node locality */
-#define	MP_TRANSLATION		192
-
-#define CPU_ENABLED		1	/* Processor is available */
-#define CPU_BOOTPROCESSOR	2	/* Processor is the BP */
-
-#define CPU_STEPPING_MASK	0x000F
-#define CPU_MODEL_MASK		0x00F0
-#define CPU_FAMILY_MASK		0x0F00
-
-struct mpc_config_processor {
-	unsigned char mpc_type;
-	unsigned char mpc_apicid;	/* Local APIC number */
-	unsigned char mpc_apicver;	/* Its versions */
-	unsigned char mpc_cpuflag;
-	unsigned int mpc_cpufeature;
-	unsigned int mpc_featureflag;	/* CPUID feature value */
-	unsigned int mpc_reserved[2];
-};
-
-struct mpc_config_bus {
-	unsigned char mpc_type;
-	unsigned char mpc_busid;
-	unsigned char mpc_bustype[6];
-};
-
-/* List of Bus Type string values, Intel MP Spec. */
-#define BUSTYPE_EISA	"EISA"
-#define BUSTYPE_ISA	"ISA"
-#define BUSTYPE_INTERN	"INTERN"	/* Internal BUS */
-#define BUSTYPE_MCA	"MCA"
-#define BUSTYPE_VL	"VL"		/* Local bus */
-#define BUSTYPE_PCI	"PCI"
-#define BUSTYPE_PCMCIA	"PCMCIA"
-#define BUSTYPE_CBUS	"CBUS"
-#define BUSTYPE_CBUSII	"CBUSII"
-#define BUSTYPE_FUTURE	"FUTURE"
-#define BUSTYPE_MBI	"MBI"
-#define BUSTYPE_MBII	"MBII"
-#define BUSTYPE_MPI	"MPI"
-#define BUSTYPE_MPSA	"MPSA"
-#define BUSTYPE_NUBUS	"NUBUS"
-#define BUSTYPE_TC	"TC"
-#define BUSTYPE_VME	"VME"
-#define BUSTYPE_XPRESS	"XPRESS"
-
-#define MPC_APIC_USABLE		0x01
-
-struct mpc_config_ioapic {
-	unsigned char mpc_type;
-	unsigned char mpc_apicid;
-	unsigned char mpc_apicver;
-	unsigned char mpc_flags;
-	unsigned int mpc_apicaddr;
-};
-
-struct mpc_config_intsrc {
-	unsigned char mpc_type;
-	unsigned char mpc_irqtype;
-	unsigned short mpc_irqflag;
-	unsigned char mpc_srcbus;
-	unsigned char mpc_srcbusirq;
-	unsigned char mpc_dstapic;
-	unsigned char mpc_dstirq;
-};
-
-enum mp_irq_source_types {
-	mp_INT = 0,
-	mp_NMI = 1,
-	mp_SMI = 2,
-	mp_ExtINT = 3
-};
-
-#define MP_IRQDIR_DEFAULT	0
-#define MP_IRQDIR_HIGH		1
-#define MP_IRQDIR_LOW		3
-
-#define MP_APIC_ALL	0xFF
-
-struct mpc_config_lintsrc {
-	unsigned char mpc_type;
-	unsigned char mpc_irqtype;
-	unsigned short mpc_irqflag;
-	unsigned char mpc_srcbusid;
-	unsigned char mpc_srcbusirq;
-	unsigned char mpc_destapic;
-	unsigned char mpc_destapiclint;
-};
-
-#define MPC_OEM_SIGNATURE "_OEM"
-
-struct mp_config_oemtable {
-	char oem_signature[4];
-	unsigned short oem_length;	/* Size of table */
-	char  oem_rev;			/* 0x01 */
-	char  oem_checksum;
-	char  mpc_oem[8];
-};
-
-/*
- *	Default configurations
- *
- *	1	2 CPU ISA 82489DX
- *	2	2 CPU EISA 82489DX neither IRQ 0 timer nor IRQ 13 DMA chaining
- *	3	2 CPU EISA 82489DX
- *	4	2 CPU MCA 82489DX
- *	5	2 CPU ISA+PCI
- *	6	2 CPU EISA+PCI
- *	7	2 CPU MCA+PCI
- */
-
-enum mp_bustype {
-	MP_BUS_ISA = 1,
-	MP_BUS_EISA,
-	MP_BUS_PCI,
-	MP_BUS_MCA,
-};
-#endif /* ASM_X86__MPSPEC_DEF_H */
diff --git a/include/asm-x86/msgbuf.h b/include/asm-x86/msgbuf.h
deleted file mode 100644
index 1b538c9..0000000
--- a/include/asm-x86/msgbuf.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef ASM_X86__MSGBUF_H
-#define ASM_X86__MSGBUF_H
-
-/*
- * The msqid64_ds structure for i386 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space on i386 is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- *
- * Pad space on x8664 is left for:
- * - 2 miscellaneous 64-bit values
- */
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-#ifdef __i386__
-	unsigned long	__unused1;
-#endif
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-#ifdef __i386__
-	unsigned long	__unused2;
-#endif
-	__kernel_time_t msg_ctime;	/* last change time */
-#ifdef __i386__
-	unsigned long	__unused3;
-#endif
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif /* ASM_X86__MSGBUF_H */
diff --git a/include/asm-x86/msidef.h b/include/asm-x86/msidef.h
deleted file mode 100644
index ed91902..0000000
--- a/include/asm-x86/msidef.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef ASM_X86__MSIDEF_H
-#define ASM_X86__MSIDEF_H
-
-/*
- * Constants for Intel APIC based MSI messages.
- */
-
-/*
- * Shifts for MSI data
- */
-
-#define MSI_DATA_VECTOR_SHIFT		0
-#define  MSI_DATA_VECTOR_MASK		0x000000ff
-#define	 MSI_DATA_VECTOR(v)		(((v) << MSI_DATA_VECTOR_SHIFT) & \
-					 MSI_DATA_VECTOR_MASK)
-
-#define MSI_DATA_DELIVERY_MODE_SHIFT	8
-#define  MSI_DATA_DELIVERY_FIXED	(0 << MSI_DATA_DELIVERY_MODE_SHIFT)
-#define  MSI_DATA_DELIVERY_LOWPRI	(1 << MSI_DATA_DELIVERY_MODE_SHIFT)
-
-#define MSI_DATA_LEVEL_SHIFT		14
-#define	 MSI_DATA_LEVEL_DEASSERT	(0 << MSI_DATA_LEVEL_SHIFT)
-#define	 MSI_DATA_LEVEL_ASSERT		(1 << MSI_DATA_LEVEL_SHIFT)
-
-#define MSI_DATA_TRIGGER_SHIFT		15
-#define  MSI_DATA_TRIGGER_EDGE		(0 << MSI_DATA_TRIGGER_SHIFT)
-#define  MSI_DATA_TRIGGER_LEVEL		(1 << MSI_DATA_TRIGGER_SHIFT)
-
-/*
- * Shift/mask fields for msi address
- */
-
-#define MSI_ADDR_BASE_HI		0
-#define MSI_ADDR_BASE_LO		0xfee00000
-
-#define MSI_ADDR_DEST_MODE_SHIFT	2
-#define  MSI_ADDR_DEST_MODE_PHYSICAL	(0 << MSI_ADDR_DEST_MODE_SHIFT)
-#define	 MSI_ADDR_DEST_MODE_LOGICAL	(1 << MSI_ADDR_DEST_MODE_SHIFT)
-
-#define MSI_ADDR_REDIRECTION_SHIFT	3
-#define  MSI_ADDR_REDIRECTION_CPU	(0 << MSI_ADDR_REDIRECTION_SHIFT)
-					/* dedicated cpu */
-#define  MSI_ADDR_REDIRECTION_LOWPRI	(1 << MSI_ADDR_REDIRECTION_SHIFT)
-					/* lowest priority */
-
-#define MSI_ADDR_DEST_ID_SHIFT		12
-#define	 MSI_ADDR_DEST_ID_MASK		0x00ffff0
-#define  MSI_ADDR_DEST_ID(dest)		(((dest) << MSI_ADDR_DEST_ID_SHIFT) & \
-					 MSI_ADDR_DEST_ID_MASK)
-
-#define MSI_ADDR_IR_EXT_INT		(1 << 4)
-#define MSI_ADDR_IR_SHV			(1 << 3)
-#define MSI_ADDR_IR_INDEX1(index)	((index & 0x8000) >> 13)
-#define MSI_ADDR_IR_INDEX2(index)	((index & 0x7fff) << 5)
-#endif /* ASM_X86__MSIDEF_H */
diff --git a/include/asm-x86/msr-index.h b/include/asm-x86/msr-index.h
deleted file mode 100644
index dabd10f..0000000
--- a/include/asm-x86/msr-index.h
+++ /dev/null
@@ -1,332 +0,0 @@
-#ifndef ASM_X86__MSR_INDEX_H
-#define ASM_X86__MSR_INDEX_H
-
-/* CPU model specific register (MSR) numbers */
-
-/* x86-64 specific MSRs */
-#define MSR_EFER		0xc0000080 /* extended feature register */
-#define MSR_STAR		0xc0000081 /* legacy mode SYSCALL target */
-#define MSR_LSTAR		0xc0000082 /* long mode SYSCALL target */
-#define MSR_CSTAR		0xc0000083 /* compat mode SYSCALL target */
-#define MSR_SYSCALL_MASK	0xc0000084 /* EFLAGS mask for syscall */
-#define MSR_FS_BASE		0xc0000100 /* 64bit FS base */
-#define MSR_GS_BASE		0xc0000101 /* 64bit GS base */
-#define MSR_KERNEL_GS_BASE	0xc0000102 /* SwapGS GS shadow */
-
-/* EFER bits: */
-#define _EFER_SCE		0  /* SYSCALL/SYSRET */
-#define _EFER_LME		8  /* Long mode enable */
-#define _EFER_LMA		10 /* Long mode active (read-only) */
-#define _EFER_NX		11 /* No execute enable */
-
-#define EFER_SCE		(1<<_EFER_SCE)
-#define EFER_LME		(1<<_EFER_LME)
-#define EFER_LMA		(1<<_EFER_LMA)
-#define EFER_NX			(1<<_EFER_NX)
-
-/* Intel MSRs. Some also available on other CPUs */
-#define MSR_IA32_PERFCTR0		0x000000c1
-#define MSR_IA32_PERFCTR1		0x000000c2
-#define MSR_FSB_FREQ			0x000000cd
-
-#define MSR_MTRRcap			0x000000fe
-#define MSR_IA32_BBL_CR_CTL		0x00000119
-
-#define MSR_IA32_SYSENTER_CS		0x00000174
-#define MSR_IA32_SYSENTER_ESP		0x00000175
-#define MSR_IA32_SYSENTER_EIP		0x00000176
-
-#define MSR_IA32_MCG_CAP		0x00000179
-#define MSR_IA32_MCG_STATUS		0x0000017a
-#define MSR_IA32_MCG_CTL		0x0000017b
-
-#define MSR_IA32_PEBS_ENABLE		0x000003f1
-#define MSR_IA32_DS_AREA		0x00000600
-#define MSR_IA32_PERF_CAPABILITIES	0x00000345
-
-#define MSR_MTRRfix64K_00000		0x00000250
-#define MSR_MTRRfix16K_80000		0x00000258
-#define MSR_MTRRfix16K_A0000		0x00000259
-#define MSR_MTRRfix4K_C0000		0x00000268
-#define MSR_MTRRfix4K_C8000		0x00000269
-#define MSR_MTRRfix4K_D0000		0x0000026a
-#define MSR_MTRRfix4K_D8000		0x0000026b
-#define MSR_MTRRfix4K_E0000		0x0000026c
-#define MSR_MTRRfix4K_E8000		0x0000026d
-#define MSR_MTRRfix4K_F0000		0x0000026e
-#define MSR_MTRRfix4K_F8000		0x0000026f
-#define MSR_MTRRdefType			0x000002ff
-
-#define MSR_IA32_CR_PAT			0x00000277
-
-#define MSR_IA32_DEBUGCTLMSR		0x000001d9
-#define MSR_IA32_LASTBRANCHFROMIP	0x000001db
-#define MSR_IA32_LASTBRANCHTOIP		0x000001dc
-#define MSR_IA32_LASTINTFROMIP		0x000001dd
-#define MSR_IA32_LASTINTTOIP		0x000001de
-
-/* DEBUGCTLMSR bits (others vary by model): */
-#define _DEBUGCTLMSR_LBR	0 /* last branch recording */
-#define _DEBUGCTLMSR_BTF	1 /* single-step on branches */
-
-#define DEBUGCTLMSR_LBR		(1UL << _DEBUGCTLMSR_LBR)
-#define DEBUGCTLMSR_BTF		(1UL << _DEBUGCTLMSR_BTF)
-
-#define MSR_IA32_MC0_CTL		0x00000400
-#define MSR_IA32_MC0_STATUS		0x00000401
-#define MSR_IA32_MC0_ADDR		0x00000402
-#define MSR_IA32_MC0_MISC		0x00000403
-
-#define MSR_P6_PERFCTR0			0x000000c1
-#define MSR_P6_PERFCTR1			0x000000c2
-#define MSR_P6_EVNTSEL0			0x00000186
-#define MSR_P6_EVNTSEL1			0x00000187
-
-/* AMD64 MSRs. Not complete. See the architecture manual for a more
-   complete list. */
-
-#define MSR_AMD64_NB_CFG		0xc001001f
-#define MSR_AMD64_IBSFETCHCTL		0xc0011030
-#define MSR_AMD64_IBSFETCHLINAD		0xc0011031
-#define MSR_AMD64_IBSFETCHPHYSAD	0xc0011032
-#define MSR_AMD64_IBSOPCTL		0xc0011033
-#define MSR_AMD64_IBSOPRIP		0xc0011034
-#define MSR_AMD64_IBSOPDATA		0xc0011035
-#define MSR_AMD64_IBSOPDATA2		0xc0011036
-#define MSR_AMD64_IBSOPDATA3		0xc0011037
-#define MSR_AMD64_IBSDCLINAD		0xc0011038
-#define MSR_AMD64_IBSDCPHYSAD		0xc0011039
-#define MSR_AMD64_IBSCTL		0xc001103a
-
-/* Fam 10h MSRs */
-#define MSR_FAM10H_MMIO_CONF_BASE	0xc0010058
-#define FAM10H_MMIO_CONF_ENABLE		(1<<0)
-#define FAM10H_MMIO_CONF_BUSRANGE_MASK	0xf
-#define FAM10H_MMIO_CONF_BUSRANGE_SHIFT 2
-#define FAM10H_MMIO_CONF_BASE_MASK	0xfffffff
-#define FAM10H_MMIO_CONF_BASE_SHIFT	20
-
-/* K8 MSRs */
-#define MSR_K8_TOP_MEM1			0xc001001a
-#define MSR_K8_TOP_MEM2			0xc001001d
-#define MSR_K8_SYSCFG			0xc0010010
-#define MSR_K8_HWCR			0xc0010015
-#define MSR_K8_INT_PENDING_MSG		0xc0010055
-/* C1E active bits in int pending message */
-#define K8_INTP_C1E_ACTIVE_MASK		0x18000000
-#define MSR_K8_TSEG_ADDR		0xc0010112
-#define K8_MTRRFIXRANGE_DRAM_ENABLE	0x00040000 /* MtrrFixDramEn bit    */
-#define K8_MTRRFIXRANGE_DRAM_MODIFY	0x00080000 /* MtrrFixDramModEn bit */
-#define K8_MTRR_RDMEM_WRMEM_MASK	0x18181818 /* Mask: RdMem|WrMem    */
-
-/* K7 MSRs */
-#define MSR_K7_EVNTSEL0			0xc0010000
-#define MSR_K7_PERFCTR0			0xc0010004
-#define MSR_K7_EVNTSEL1			0xc0010001
-#define MSR_K7_PERFCTR1			0xc0010005
-#define MSR_K7_EVNTSEL2			0xc0010002
-#define MSR_K7_PERFCTR2			0xc0010006
-#define MSR_K7_EVNTSEL3			0xc0010003
-#define MSR_K7_PERFCTR3			0xc0010007
-#define MSR_K7_CLK_CTL			0xc001001b
-#define MSR_K7_HWCR			0xc0010015
-#define MSR_K7_FID_VID_CTL		0xc0010041
-#define MSR_K7_FID_VID_STATUS		0xc0010042
-
-/* K6 MSRs */
-#define MSR_K6_EFER			0xc0000080
-#define MSR_K6_STAR			0xc0000081
-#define MSR_K6_WHCR			0xc0000082
-#define MSR_K6_UWCCR			0xc0000085
-#define MSR_K6_EPMR			0xc0000086
-#define MSR_K6_PSOR			0xc0000087
-#define MSR_K6_PFIR			0xc0000088
-
-/* Centaur-Hauls/IDT defined MSRs. */
-#define MSR_IDT_FCR1			0x00000107
-#define MSR_IDT_FCR2			0x00000108
-#define MSR_IDT_FCR3			0x00000109
-#define MSR_IDT_FCR4			0x0000010a
-
-#define MSR_IDT_MCR0			0x00000110
-#define MSR_IDT_MCR1			0x00000111
-#define MSR_IDT_MCR2			0x00000112
-#define MSR_IDT_MCR3			0x00000113
-#define MSR_IDT_MCR4			0x00000114
-#define MSR_IDT_MCR5			0x00000115
-#define MSR_IDT_MCR6			0x00000116
-#define MSR_IDT_MCR7			0x00000117
-#define MSR_IDT_MCR_CTRL		0x00000120
-
-/* VIA Cyrix defined MSRs*/
-#define MSR_VIA_FCR			0x00001107
-#define MSR_VIA_LONGHAUL		0x0000110a
-#define MSR_VIA_RNG			0x0000110b
-#define MSR_VIA_BCR2			0x00001147
-
-/* Transmeta defined MSRs */
-#define MSR_TMTA_LONGRUN_CTRL		0x80868010
-#define MSR_TMTA_LONGRUN_FLAGS		0x80868011
-#define MSR_TMTA_LRTI_READOUT		0x80868018
-#define MSR_TMTA_LRTI_VOLT_MHZ		0x8086801a
-
-/* Intel defined MSRs. */
-#define MSR_IA32_P5_MC_ADDR		0x00000000
-#define MSR_IA32_P5_MC_TYPE		0x00000001
-#define MSR_IA32_TSC			0x00000010
-#define MSR_IA32_PLATFORM_ID		0x00000017
-#define MSR_IA32_EBL_CR_POWERON		0x0000002a
-#define MSR_IA32_FEATURE_CONTROL        0x0000003a
-
-#define FEATURE_CONTROL_LOCKED		(1<<0)
-#define FEATURE_CONTROL_VMXON_ENABLED	(1<<2)
-
-#define MSR_IA32_APICBASE		0x0000001b
-#define MSR_IA32_APICBASE_BSP		(1<<8)
-#define MSR_IA32_APICBASE_ENABLE	(1<<11)
-#define MSR_IA32_APICBASE_BASE		(0xfffff<<12)
-
-#define MSR_IA32_UCODE_WRITE		0x00000079
-#define MSR_IA32_UCODE_REV		0x0000008b
-
-#define MSR_IA32_PERF_STATUS		0x00000198
-#define MSR_IA32_PERF_CTL		0x00000199
-
-#define MSR_IA32_MPERF			0x000000e7
-#define MSR_IA32_APERF			0x000000e8
-
-#define MSR_IA32_THERM_CONTROL		0x0000019a
-#define MSR_IA32_THERM_INTERRUPT	0x0000019b
-#define MSR_IA32_THERM_STATUS		0x0000019c
-#define MSR_IA32_MISC_ENABLE		0x000001a0
-
-/* Intel Model 6 */
-#define MSR_P6_EVNTSEL0			0x00000186
-#define MSR_P6_EVNTSEL1			0x00000187
-
-/* P4/Xeon+ specific */
-#define MSR_IA32_MCG_EAX		0x00000180
-#define MSR_IA32_MCG_EBX		0x00000181
-#define MSR_IA32_MCG_ECX		0x00000182
-#define MSR_IA32_MCG_EDX		0x00000183
-#define MSR_IA32_MCG_ESI		0x00000184
-#define MSR_IA32_MCG_EDI		0x00000185
-#define MSR_IA32_MCG_EBP		0x00000186
-#define MSR_IA32_MCG_ESP		0x00000187
-#define MSR_IA32_MCG_EFLAGS		0x00000188
-#define MSR_IA32_MCG_EIP		0x00000189
-#define MSR_IA32_MCG_RESERVED		0x0000018a
-
-/* Pentium IV performance counter MSRs */
-#define MSR_P4_BPU_PERFCTR0		0x00000300
-#define MSR_P4_BPU_PERFCTR1		0x00000301
-#define MSR_P4_BPU_PERFCTR2		0x00000302
-#define MSR_P4_BPU_PERFCTR3		0x00000303
-#define MSR_P4_MS_PERFCTR0		0x00000304
-#define MSR_P4_MS_PERFCTR1		0x00000305
-#define MSR_P4_MS_PERFCTR2		0x00000306
-#define MSR_P4_MS_PERFCTR3		0x00000307
-#define MSR_P4_FLAME_PERFCTR0		0x00000308
-#define MSR_P4_FLAME_PERFCTR1		0x00000309
-#define MSR_P4_FLAME_PERFCTR2		0x0000030a
-#define MSR_P4_FLAME_PERFCTR3		0x0000030b
-#define MSR_P4_IQ_PERFCTR0		0x0000030c
-#define MSR_P4_IQ_PERFCTR1		0x0000030d
-#define MSR_P4_IQ_PERFCTR2		0x0000030e
-#define MSR_P4_IQ_PERFCTR3		0x0000030f
-#define MSR_P4_IQ_PERFCTR4		0x00000310
-#define MSR_P4_IQ_PERFCTR5		0x00000311
-#define MSR_P4_BPU_CCCR0		0x00000360
-#define MSR_P4_BPU_CCCR1		0x00000361
-#define MSR_P4_BPU_CCCR2		0x00000362
-#define MSR_P4_BPU_CCCR3		0x00000363
-#define MSR_P4_MS_CCCR0			0x00000364
-#define MSR_P4_MS_CCCR1			0x00000365
-#define MSR_P4_MS_CCCR2			0x00000366
-#define MSR_P4_MS_CCCR3			0x00000367
-#define MSR_P4_FLAME_CCCR0		0x00000368
-#define MSR_P4_FLAME_CCCR1		0x00000369
-#define MSR_P4_FLAME_CCCR2		0x0000036a
-#define MSR_P4_FLAME_CCCR3		0x0000036b
-#define MSR_P4_IQ_CCCR0			0x0000036c
-#define MSR_P4_IQ_CCCR1			0x0000036d
-#define MSR_P4_IQ_CCCR2			0x0000036e
-#define MSR_P4_IQ_CCCR3			0x0000036f
-#define MSR_P4_IQ_CCCR4			0x00000370
-#define MSR_P4_IQ_CCCR5			0x00000371
-#define MSR_P4_ALF_ESCR0		0x000003ca
-#define MSR_P4_ALF_ESCR1		0x000003cb
-#define MSR_P4_BPU_ESCR0		0x000003b2
-#define MSR_P4_BPU_ESCR1		0x000003b3
-#define MSR_P4_BSU_ESCR0		0x000003a0
-#define MSR_P4_BSU_ESCR1		0x000003a1
-#define MSR_P4_CRU_ESCR0		0x000003b8
-#define MSR_P4_CRU_ESCR1		0x000003b9
-#define MSR_P4_CRU_ESCR2		0x000003cc
-#define MSR_P4_CRU_ESCR3		0x000003cd
-#define MSR_P4_CRU_ESCR4		0x000003e0
-#define MSR_P4_CRU_ESCR5		0x000003e1
-#define MSR_P4_DAC_ESCR0		0x000003a8
-#define MSR_P4_DAC_ESCR1		0x000003a9
-#define MSR_P4_FIRM_ESCR0		0x000003a4
-#define MSR_P4_FIRM_ESCR1		0x000003a5
-#define MSR_P4_FLAME_ESCR0		0x000003a6
-#define MSR_P4_FLAME_ESCR1		0x000003a7
-#define MSR_P4_FSB_ESCR0		0x000003a2
-#define MSR_P4_FSB_ESCR1		0x000003a3
-#define MSR_P4_IQ_ESCR0			0x000003ba
-#define MSR_P4_IQ_ESCR1			0x000003bb
-#define MSR_P4_IS_ESCR0			0x000003b4
-#define MSR_P4_IS_ESCR1			0x000003b5
-#define MSR_P4_ITLB_ESCR0		0x000003b6
-#define MSR_P4_ITLB_ESCR1		0x000003b7
-#define MSR_P4_IX_ESCR0			0x000003c8
-#define MSR_P4_IX_ESCR1			0x000003c9
-#define MSR_P4_MOB_ESCR0		0x000003aa
-#define MSR_P4_MOB_ESCR1		0x000003ab
-#define MSR_P4_MS_ESCR0			0x000003c0
-#define MSR_P4_MS_ESCR1			0x000003c1
-#define MSR_P4_PMH_ESCR0		0x000003ac
-#define MSR_P4_PMH_ESCR1		0x000003ad
-#define MSR_P4_RAT_ESCR0		0x000003bc
-#define MSR_P4_RAT_ESCR1		0x000003bd
-#define MSR_P4_SAAT_ESCR0		0x000003ae
-#define MSR_P4_SAAT_ESCR1		0x000003af
-#define MSR_P4_SSU_ESCR0		0x000003be
-#define MSR_P4_SSU_ESCR1		0x000003bf /* guess: not in manual */
-
-#define MSR_P4_TBPU_ESCR0		0x000003c2
-#define MSR_P4_TBPU_ESCR1		0x000003c3
-#define MSR_P4_TC_ESCR0			0x000003c4
-#define MSR_P4_TC_ESCR1			0x000003c5
-#define MSR_P4_U2L_ESCR0		0x000003b0
-#define MSR_P4_U2L_ESCR1		0x000003b1
-
-/* Intel Core-based CPU performance counters */
-#define MSR_CORE_PERF_FIXED_CTR0	0x00000309
-#define MSR_CORE_PERF_FIXED_CTR1	0x0000030a
-#define MSR_CORE_PERF_FIXED_CTR2	0x0000030b
-#define MSR_CORE_PERF_FIXED_CTR_CTRL	0x0000038d
-#define MSR_CORE_PERF_GLOBAL_STATUS	0x0000038e
-#define MSR_CORE_PERF_GLOBAL_CTRL	0x0000038f
-#define MSR_CORE_PERF_GLOBAL_OVF_CTRL	0x00000390
-
-/* Geode defined MSRs */
-#define MSR_GEODE_BUSCONT_CONF0		0x00001900
-
-/* Intel VT MSRs */
-#define MSR_IA32_VMX_BASIC              0x00000480
-#define MSR_IA32_VMX_PINBASED_CTLS      0x00000481
-#define MSR_IA32_VMX_PROCBASED_CTLS     0x00000482
-#define MSR_IA32_VMX_EXIT_CTLS          0x00000483
-#define MSR_IA32_VMX_ENTRY_CTLS         0x00000484
-#define MSR_IA32_VMX_MISC               0x00000485
-#define MSR_IA32_VMX_CR0_FIXED0         0x00000486
-#define MSR_IA32_VMX_CR0_FIXED1         0x00000487
-#define MSR_IA32_VMX_CR4_FIXED0         0x00000488
-#define MSR_IA32_VMX_CR4_FIXED1         0x00000489
-#define MSR_IA32_VMX_VMCS_ENUM          0x0000048a
-#define MSR_IA32_VMX_PROCBASED_CTLS2    0x0000048b
-#define MSR_IA32_VMX_EPT_VPID_CAP       0x0000048c
-
-#endif /* ASM_X86__MSR_INDEX_H */
diff --git a/include/asm-x86/msr.h b/include/asm-x86/msr.h
deleted file mode 100644
index 530af1f..0000000
--- a/include/asm-x86/msr.h
+++ /dev/null
@@ -1,247 +0,0 @@
-#ifndef ASM_X86__MSR_H
-#define ASM_X86__MSR_H
-
-#include <asm/msr-index.h>
-
-#ifndef __ASSEMBLY__
-# include <linux/types.h>
-#endif
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-#include <asm/asm.h>
-#include <asm/errno.h>
-
-static inline unsigned long long native_read_tscp(unsigned int *aux)
-{
-	unsigned long low, high;
-	asm volatile(".byte 0x0f,0x01,0xf9"
-		     : "=a" (low), "=d" (high), "=c" (*aux));
-	return low | ((u64)high << 32);
-}
-
-/*
- * i386 calling convention returns 64-bit value in edx:eax, while
- * x86_64 returns at rax. Also, the "A" constraint does not really
- * mean rdx:rax in x86_64, so we need specialized behaviour for each
- * architecture
- */
-#ifdef CONFIG_X86_64
-#define DECLARE_ARGS(val, low, high)	unsigned low, high
-#define EAX_EDX_VAL(val, low, high)	((low) | ((u64)(high) << 32))
-#define EAX_EDX_ARGS(val, low, high)	"a" (low), "d" (high)
-#define EAX_EDX_RET(val, low, high)	"=a" (low), "=d" (high)
-#else
-#define DECLARE_ARGS(val, low, high)	unsigned long long val
-#define EAX_EDX_VAL(val, low, high)	(val)
-#define EAX_EDX_ARGS(val, low, high)	"A" (val)
-#define EAX_EDX_RET(val, low, high)	"=A" (val)
-#endif
-
-static inline unsigned long long native_read_msr(unsigned int msr)
-{
-	DECLARE_ARGS(val, low, high);
-
-	asm volatile("rdmsr" : EAX_EDX_RET(val, low, high) : "c" (msr));
-	return EAX_EDX_VAL(val, low, high);
-}
-
-static inline unsigned long long native_read_msr_safe(unsigned int msr,
-						      int *err)
-{
-	DECLARE_ARGS(val, low, high);
-
-	asm volatile("2: rdmsr ; xor %[err],%[err]\n"
-		     "1:\n\t"
-		     ".section .fixup,\"ax\"\n\t"
-		     "3:  mov %[fault],%[err] ; jmp 1b\n\t"
-		     ".previous\n\t"
-		     _ASM_EXTABLE(2b, 3b)
-		     : [err] "=r" (*err), EAX_EDX_RET(val, low, high)
-		     : "c" (msr), [fault] "i" (-EFAULT));
-	return EAX_EDX_VAL(val, low, high);
-}
-
-static inline unsigned long long native_read_msr_amd_safe(unsigned int msr,
-						      int *err)
-{
-	DECLARE_ARGS(val, low, high);
-
-	asm volatile("2: rdmsr ; xor %0,%0\n"
-		     "1:\n\t"
-		     ".section .fixup,\"ax\"\n\t"
-		     "3:  mov %3,%0 ; jmp 1b\n\t"
-		     ".previous\n\t"
-		     _ASM_EXTABLE(2b, 3b)
-		     : "=r" (*err), EAX_EDX_RET(val, low, high)
-		     : "c" (msr), "D" (0x9c5a203a), "i" (-EFAULT));
-	return EAX_EDX_VAL(val, low, high);
-}
-
-static inline void native_write_msr(unsigned int msr,
-				    unsigned low, unsigned high)
-{
-	asm volatile("wrmsr" : : "c" (msr), "a"(low), "d" (high) : "memory");
-}
-
-static inline int native_write_msr_safe(unsigned int msr,
-					unsigned low, unsigned high)
-{
-	int err;
-	asm volatile("2: wrmsr ; xor %[err],%[err]\n"
-		     "1:\n\t"
-		     ".section .fixup,\"ax\"\n\t"
-		     "3:  mov %[fault],%[err] ; jmp 1b\n\t"
-		     ".previous\n\t"
-		     _ASM_EXTABLE(2b, 3b)
-		     : [err] "=a" (err)
-		     : "c" (msr), "0" (low), "d" (high),
-		       [fault] "i" (-EFAULT)
-		     : "memory");
-	return err;
-}
-
-extern unsigned long long native_read_tsc(void);
-
-static __always_inline unsigned long long __native_read_tsc(void)
-{
-	DECLARE_ARGS(val, low, high);
-
-	rdtsc_barrier();
-	asm volatile("rdtsc" : EAX_EDX_RET(val, low, high));
-	rdtsc_barrier();
-
-	return EAX_EDX_VAL(val, low, high);
-}
-
-static inline unsigned long long native_read_pmc(int counter)
-{
-	DECLARE_ARGS(val, low, high);
-
-	asm volatile("rdpmc" : EAX_EDX_RET(val, low, high) : "c" (counter));
-	return EAX_EDX_VAL(val, low, high);
-}
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#include <linux/errno.h>
-/*
- * Access to machine-specific registers (available on 586 and better only)
- * Note: the rd* operations modify the parameters directly (without using
- * pointer indirection), this allows gcc to optimize better
- */
-
-#define rdmsr(msr, val1, val2)					\
-do {								\
-	u64 __val = native_read_msr((msr));			\
-	(val1) = (u32)__val;					\
-	(val2) = (u32)(__val >> 32);				\
-} while (0)
-
-static inline void wrmsr(unsigned msr, unsigned low, unsigned high)
-{
-	native_write_msr(msr, low, high);
-}
-
-#define rdmsrl(msr, val)			\
-	((val) = native_read_msr((msr)))
-
-#define wrmsrl(msr, val)						\
-	native_write_msr((msr), (u32)((u64)(val)), (u32)((u64)(val) >> 32))
-
-/* wrmsr with exception handling */
-static inline int wrmsr_safe(unsigned msr, unsigned low, unsigned high)
-{
-	return native_write_msr_safe(msr, low, high);
-}
-
-/* rdmsr with exception handling */
-#define rdmsr_safe(msr, p1, p2)					\
-({								\
-	int __err;						\
-	u64 __val = native_read_msr_safe((msr), &__err);	\
-	(*p1) = (u32)__val;					\
-	(*p2) = (u32)(__val >> 32);				\
-	__err;							\
-})
-
-static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
-{
-	int err;
-
-	*p = native_read_msr_safe(msr, &err);
-	return err;
-}
-static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
-{
-	int err;
-
-	*p = native_read_msr_amd_safe(msr, &err);
-	return err;
-}
-
-#define rdtscl(low)						\
-	((low) = (u32)native_read_tsc())
-
-#define rdtscll(val)						\
-	((val) = native_read_tsc())
-
-#define rdpmc(counter, low, high)			\
-do {							\
-	u64 _l = native_read_pmc((counter));		\
-	(low)  = (u32)_l;				\
-	(high) = (u32)(_l >> 32);			\
-} while (0)
-
-#define rdtscp(low, high, aux)					\
-do {                                                            \
-	unsigned long long _val = native_read_tscp(&(aux));     \
-	(low) = (u32)_val;                                      \
-	(high) = (u32)(_val >> 32);                             \
-} while (0)
-
-#define rdtscpll(val, aux) (val) = native_read_tscp(&(aux))
-
-#endif	/* !CONFIG_PARAVIRT */
-
-
-#define checking_wrmsrl(msr, val) wrmsr_safe((msr), (u32)(val),		\
-					     (u32)((val) >> 32))
-
-#define write_tsc(val1, val2) wrmsr(0x10, (val1), (val2))
-
-#define write_rdtscp_aux(val) wrmsr(0xc0000103, (val), 0)
-
-#ifdef CONFIG_SMP
-int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
-int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
-int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
-int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
-#else  /*  CONFIG_SMP  */
-static inline int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
-{
-	rdmsr(msr_no, *l, *h);
-	return 0;
-}
-static inline int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
-{
-	wrmsr(msr_no, l, h);
-	return 0;
-}
-static inline int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no,
-				    u32 *l, u32 *h)
-{
-	return rdmsr_safe(msr_no, l, h);
-}
-static inline int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
-{
-	return wrmsr_safe(msr_no, l, h);
-}
-#endif  /* CONFIG_SMP */
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-
-
-#endif /* ASM_X86__MSR_H */
diff --git a/include/asm-x86/mtrr.h b/include/asm-x86/mtrr.h
deleted file mode 100644
index 23a7f83..0000000
--- a/include/asm-x86/mtrr.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*  Generic MTRR (Memory Type Range Register) ioctls.
-
-    Copyright (C) 1997-1999  Richard Gooch
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Library General Public
-    License as published by the Free Software Foundation; either
-    version 2 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Library General Public License for more details.
-
-    You should have received a copy of the GNU Library General Public
-    License along with this library; if not, write to the Free
-    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-    Richard Gooch may be reached by email at  rgooch@atnf.csiro.au
-    The postal address is:
-      Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia.
-*/
-#ifndef ASM_X86__MTRR_H
-#define ASM_X86__MTRR_H
-
-#include <linux/ioctl.h>
-#include <linux/errno.h>
-
-#define	MTRR_IOCTL_BASE	'M'
-
-struct mtrr_sentry {
-    unsigned long base;    /*  Base address     */
-    unsigned int size;    /*  Size of region   */
-    unsigned int type;     /*  Type of region   */
-};
-
-/* Warning: this structure has a different order from i386
-   on x86-64. The 32bit emulation code takes care of that.
-   But you need to use this for 64bit, otherwise your X server
-   will break. */
-
-#ifdef __i386__
-struct mtrr_gentry {
-    unsigned int regnum;   /*  Register number  */
-    unsigned long base;    /*  Base address     */
-    unsigned int size;    /*  Size of region   */
-    unsigned int type;     /*  Type of region   */
-};
-
-#else /* __i386__ */
-
-struct mtrr_gentry {
-    unsigned long base;    /*  Base address     */
-    unsigned int size;    /*  Size of region   */
-    unsigned int regnum;   /*  Register number  */
-    unsigned int type;     /*  Type of region   */
-};
-#endif /* !__i386__ */
-
-/*  These are the various ioctls  */
-#define MTRRIOC_ADD_ENTRY        _IOW(MTRR_IOCTL_BASE,  0, struct mtrr_sentry)
-#define MTRRIOC_SET_ENTRY        _IOW(MTRR_IOCTL_BASE,  1, struct mtrr_sentry)
-#define MTRRIOC_DEL_ENTRY        _IOW(MTRR_IOCTL_BASE,  2, struct mtrr_sentry)
-#define MTRRIOC_GET_ENTRY        _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry)
-#define MTRRIOC_KILL_ENTRY       _IOW(MTRR_IOCTL_BASE,  4, struct mtrr_sentry)
-#define MTRRIOC_ADD_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  5, struct mtrr_sentry)
-#define MTRRIOC_SET_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  6, struct mtrr_sentry)
-#define MTRRIOC_DEL_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  7, struct mtrr_sentry)
-#define MTRRIOC_GET_PAGE_ENTRY   _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry)
-#define MTRRIOC_KILL_PAGE_ENTRY  _IOW(MTRR_IOCTL_BASE,  9, struct mtrr_sentry)
-
-/*  These are the region types  */
-#define MTRR_TYPE_UNCACHABLE 0
-#define MTRR_TYPE_WRCOMB     1
-/*#define MTRR_TYPE_         2*/
-/*#define MTRR_TYPE_         3*/
-#define MTRR_TYPE_WRTHROUGH  4
-#define MTRR_TYPE_WRPROT     5
-#define MTRR_TYPE_WRBACK     6
-#define MTRR_NUM_TYPES       7
-
-#ifdef __KERNEL__
-
-/*  The following functions are for use by other drivers  */
-# ifdef CONFIG_MTRR
-extern u8 mtrr_type_lookup(u64 addr, u64 end);
-extern void mtrr_save_fixed_ranges(void *);
-extern void mtrr_save_state(void);
-extern int mtrr_add(unsigned long base, unsigned long size,
-		    unsigned int type, bool increment);
-extern int mtrr_add_page(unsigned long base, unsigned long size,
-			 unsigned int type, bool increment);
-extern int mtrr_del(int reg, unsigned long base, unsigned long size);
-extern int mtrr_del_page(int reg, unsigned long base, unsigned long size);
-extern void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi);
-extern void mtrr_ap_init(void);
-extern void mtrr_bp_init(void);
-extern int mtrr_trim_uncached_memory(unsigned long end_pfn);
-extern int amd_special_default_mtrr(void);
-#  else
-static inline u8 mtrr_type_lookup(u64 addr, u64 end)
-{
-	/*
-	 * Return no-MTRRs:
-	 */
-	return 0xff;
-}
-#define mtrr_save_fixed_ranges(arg) do {} while (0)
-#define mtrr_save_state() do {} while (0)
-static inline int mtrr_add(unsigned long base, unsigned long size,
-			   unsigned int type, bool increment)
-{
-    return -ENODEV;
-}
-static inline int mtrr_add_page(unsigned long base, unsigned long size,
-				unsigned int type, bool increment)
-{
-    return -ENODEV;
-}
-static inline int mtrr_del(int reg, unsigned long base, unsigned long size)
-{
-    return -ENODEV;
-}
-static inline int mtrr_del_page(int reg, unsigned long base, unsigned long size)
-{
-    return -ENODEV;
-}
-static inline int mtrr_trim_uncached_memory(unsigned long end_pfn)
-{
-	return 0;
-}
-static inline void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
-{
-}
-
-#define mtrr_ap_init() do {} while (0)
-#define mtrr_bp_init() do {} while (0)
-#  endif
-
-#ifdef CONFIG_COMPAT
-#include <linux/compat.h>
-
-struct mtrr_sentry32 {
-    compat_ulong_t base;    /*  Base address     */
-    compat_uint_t size;    /*  Size of region   */
-    compat_uint_t type;     /*  Type of region   */
-};
-
-struct mtrr_gentry32 {
-    compat_ulong_t regnum;   /*  Register number  */
-    compat_uint_t base;    /*  Base address     */
-    compat_uint_t size;    /*  Size of region   */
-    compat_uint_t type;     /*  Type of region   */
-};
-
-#define MTRR_IOCTL_BASE 'M'
-
-#define MTRRIOC32_ADD_ENTRY      _IOW(MTRR_IOCTL_BASE,  0, struct mtrr_sentry32)
-#define MTRRIOC32_SET_ENTRY      _IOW(MTRR_IOCTL_BASE,  1, struct mtrr_sentry32)
-#define MTRRIOC32_DEL_ENTRY      _IOW(MTRR_IOCTL_BASE,  2, struct mtrr_sentry32)
-#define MTRRIOC32_GET_ENTRY      _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry32)
-#define MTRRIOC32_KILL_ENTRY     _IOW(MTRR_IOCTL_BASE,  4, struct mtrr_sentry32)
-#define MTRRIOC32_ADD_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE,  5, struct mtrr_sentry32)
-#define MTRRIOC32_SET_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE,  6, struct mtrr_sentry32)
-#define MTRRIOC32_DEL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE,  7, struct mtrr_sentry32)
-#define MTRRIOC32_GET_PAGE_ENTRY _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry32)
-#define MTRRIOC32_KILL_PAGE_ENTRY		\
-				 _IOW(MTRR_IOCTL_BASE,  9, struct mtrr_sentry32)
-#endif /* CONFIG_COMPAT */
-
-#endif /* __KERNEL__ */
-
-#endif /* ASM_X86__MTRR_H */
diff --git a/include/asm-x86/mutex_32.h b/include/asm-x86/mutex_32.h
deleted file mode 100644
index 25c16d8..0000000
--- a/include/asm-x86/mutex_32.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Assembly implementation of the mutex fastpath, based on atomic
- * decrement/increment.
- *
- * started by Ingo Molnar:
- *
- *  Copyright (C) 2004, 2005, 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
- */
-#ifndef ASM_X86__MUTEX_32_H
-#define ASM_X86__MUTEX_32_H
-
-#include <asm/alternative.h>
-
-/**
- *  __mutex_fastpath_lock - try to take the lock by moving the count
- *                          from 1 to a 0 value
- *  @count: pointer of type atomic_t
- *  @fn: function to call if the original value was not 1
- *
- * Change the count from 1 to a value lower than 1, and call <fn> if it
- * wasn't 1 originally. This function MUST leave the value lower than 1
- * even when the "1" assertion wasn't true.
- */
-#define __mutex_fastpath_lock(count, fail_fn)			\
-do {								\
-	unsigned int dummy;					\
-								\
-	typecheck(atomic_t *, count);				\
-	typecheck_fn(void (*)(atomic_t *), fail_fn);		\
-								\
-	asm volatile(LOCK_PREFIX "   decl (%%eax)\n"		\
-		     "   jns 1f	\n"				\
-		     "   call " #fail_fn "\n"			\
-		     "1:\n"					\
-		     : "=a" (dummy)				\
-		     : "a" (count)				\
-		     : "memory", "ecx", "edx");			\
-} while (0)
-
-
-/**
- *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
- *                                 from 1 to a 0 value
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 1
- *
- * Change the count from 1 to a value lower than 1, and call <fail_fn> if it
- * wasn't 1 originally. This function returns 0 if the fastpath succeeds,
- * or anything the slow path function returns
- */
-static inline int __mutex_fastpath_lock_retval(atomic_t *count,
-					       int (*fail_fn)(atomic_t *))
-{
-	if (unlikely(atomic_dec_return(count) < 0))
-		return fail_fn(count);
-	else
-		return 0;
-}
-
-/**
- *  __mutex_fastpath_unlock - try to promote the mutex from 0 to 1
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 0
- *
- * try to promote the mutex from 0 to 1. if it wasn't 0, call <fail_fn>.
- * In the failure case, this function is allowed to either set the value
- * to 1, or to set it to a value lower than 1.
- *
- * If the implementation sets it to a value of lower than 1, the
- * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
- * to return 0 otherwise.
- */
-#define __mutex_fastpath_unlock(count, fail_fn)			\
-do {								\
-	unsigned int dummy;					\
-								\
-	typecheck(atomic_t *, count);				\
-	typecheck_fn(void (*)(atomic_t *), fail_fn);		\
-								\
-	asm volatile(LOCK_PREFIX "   incl (%%eax)\n"		\
-		     "   jg	1f\n"				\
-		     "   call " #fail_fn "\n"			\
-		     "1:\n"					\
-		     : "=a" (dummy)				\
-		     : "a" (count)				\
-		     : "memory", "ecx", "edx");			\
-} while (0)
-
-#define __mutex_slowpath_needs_to_unlock()	1
-
-/**
- * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
- *
- *  @count: pointer of type atomic_t
- *  @fail_fn: fallback function
- *
- * Change the count from 1 to a value lower than 1, and return 0 (failure)
- * if it wasn't 1 originally, or return 1 (success) otherwise. This function
- * MUST leave the value lower than 1 even when the "1" assertion wasn't true.
- * Additionally, if the value was < 0 originally, this function must not leave
- * it to 0 on failure.
- */
-static inline int __mutex_fastpath_trylock(atomic_t *count,
-					   int (*fail_fn)(atomic_t *))
-{
-	/*
-	 * We have two variants here. The cmpxchg based one is the best one
-	 * because it never induce a false contention state.  It is included
-	 * here because architectures using the inc/dec algorithms over the
-	 * xchg ones are much more likely to support cmpxchg natively.
-	 *
-	 * If not we fall back to the spinlock based variant - that is
-	 * just as efficient (and simpler) as a 'destructive' probing of
-	 * the mutex state would be.
-	 */
-#ifdef __HAVE_ARCH_CMPXCHG
-	if (likely(atomic_cmpxchg(count, 1, 0) == 1))
-		return 1;
-	return 0;
-#else
-	return fail_fn(count);
-#endif
-}
-
-#endif /* ASM_X86__MUTEX_32_H */
diff --git a/include/asm-x86/mutex_64.h b/include/asm-x86/mutex_64.h
deleted file mode 100644
index 918ba21..0000000
--- a/include/asm-x86/mutex_64.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Assembly implementation of the mutex fastpath, based on atomic
- * decrement/increment.
- *
- * started by Ingo Molnar:
- *
- *  Copyright (C) 2004, 2005, 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
- */
-#ifndef ASM_X86__MUTEX_64_H
-#define ASM_X86__MUTEX_64_H
-
-/**
- * __mutex_fastpath_lock - decrement and call function if negative
- * @v: pointer of type atomic_t
- * @fail_fn: function to call if the result is negative
- *
- * Atomically decrements @v and calls <fail_fn> if the result is negative.
- */
-#define __mutex_fastpath_lock(v, fail_fn)			\
-do {								\
-	unsigned long dummy;					\
-								\
-	typecheck(atomic_t *, v);				\
-	typecheck_fn(void (*)(atomic_t *), fail_fn);		\
-								\
-	asm volatile(LOCK_PREFIX "   decl (%%rdi)\n"		\
-		     "   jns 1f		\n"			\
-		     "   call " #fail_fn "\n"			\
-		     "1:"					\
-		     : "=D" (dummy)				\
-		     : "D" (v)					\
-		     : "rax", "rsi", "rdx", "rcx",		\
-		       "r8", "r9", "r10", "r11", "memory");	\
-} while (0)
-
-/**
- *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
- *                                 from 1 to a 0 value
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 1
- *
- * Change the count from 1 to a value lower than 1, and call <fail_fn> if
- * it wasn't 1 originally. This function returns 0 if the fastpath succeeds,
- * or anything the slow path function returns
- */
-static inline int __mutex_fastpath_lock_retval(atomic_t *count,
-					       int (*fail_fn)(atomic_t *))
-{
-	if (unlikely(atomic_dec_return(count) < 0))
-		return fail_fn(count);
-	else
-		return 0;
-}
-
-/**
- * __mutex_fastpath_unlock - increment and call function if nonpositive
- * @v: pointer of type atomic_t
- * @fail_fn: function to call if the result is nonpositive
- *
- * Atomically increments @v and calls <fail_fn> if the result is nonpositive.
- */
-#define __mutex_fastpath_unlock(v, fail_fn)			\
-do {								\
-	unsigned long dummy;					\
-								\
-	typecheck(atomic_t *, v);				\
-	typecheck_fn(void (*)(atomic_t *), fail_fn);		\
-								\
-	asm volatile(LOCK_PREFIX "   incl (%%rdi)\n"		\
-		     "   jg 1f\n"				\
-		     "   call " #fail_fn "\n"			\
-		     "1:"					\
-		     : "=D" (dummy)				\
-		     : "D" (v)					\
-		     : "rax", "rsi", "rdx", "rcx",		\
-		       "r8", "r9", "r10", "r11", "memory");	\
-} while (0)
-
-#define __mutex_slowpath_needs_to_unlock()	1
-
-/**
- * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
- *
- *  @count: pointer of type atomic_t
- *  @fail_fn: fallback function
- *
- * Change the count from 1 to 0 and return 1 (success), or return 0 (failure)
- * if it wasn't 1 originally. [the fallback function is never used on
- * x86_64, because all x86_64 CPUs have a CMPXCHG instruction.]
- */
-static inline int __mutex_fastpath_trylock(atomic_t *count,
-					   int (*fail_fn)(atomic_t *))
-{
-	if (likely(atomic_cmpxchg(count, 1, 0) == 1))
-		return 1;
-	else
-		return 0;
-}
-
-#endif /* ASM_X86__MUTEX_64_H */
diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h
deleted file mode 100644
index a53f829..0000000
--- a/include/asm-x86/nmi.h
+++ /dev/null
@@ -1,81 +0,0 @@
-#ifndef ASM_X86__NMI_H
-#define ASM_X86__NMI_H
-
-#include <linux/pm.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#ifdef ARCH_HAS_NMI_WATCHDOG
-
-/**
- * do_nmi_callback
- *
- * Check to see if a callback exists and execute it.  Return 1
- * if the handler exists and was handled successfully.
- */
-int do_nmi_callback(struct pt_regs *regs, int cpu);
-
-extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
-extern int check_nmi_watchdog(void);
-extern int nmi_watchdog_enabled;
-extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
-extern int avail_to_resrv_perfctr_nmi(unsigned int);
-extern int reserve_perfctr_nmi(unsigned int);
-extern void release_perfctr_nmi(unsigned int);
-extern int reserve_evntsel_nmi(unsigned int);
-extern void release_evntsel_nmi(unsigned int);
-
-extern void setup_apic_nmi_watchdog(void *);
-extern void stop_apic_nmi_watchdog(void *);
-extern void disable_timer_nmi_watchdog(void);
-extern void enable_timer_nmi_watchdog(void);
-extern int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason);
-extern void cpu_nmi_set_wd_enabled(void);
-
-extern atomic_t nmi_active;
-extern unsigned int nmi_watchdog;
-#define NMI_NONE	0
-#define NMI_IO_APIC	1
-#define NMI_LOCAL_APIC	2
-#define NMI_INVALID	3
-
-struct ctl_table;
-struct file;
-extern int proc_nmi_enabled(struct ctl_table *, int , struct file *,
-			void __user *, size_t *, loff_t *);
-extern int unknown_nmi_panic;
-
-void __trigger_all_cpu_backtrace(void);
-#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
-
-static inline void localise_nmi_watchdog(void)
-{
-	if (nmi_watchdog == NMI_IO_APIC)
-		nmi_watchdog = NMI_LOCAL_APIC;
-}
-
-/* check if nmi_watchdog is active (ie was specified at boot) */
-static inline int nmi_watchdog_active(void)
-{
-	/*
-	 * actually it should be:
-	 * 	return (nmi_watchdog == NMI_LOCAL_APIC ||
-	 * 		nmi_watchdog == NMI_IO_APIC)
-	 * but since they are power of two we could use a
-	 * cheaper way --cvg
-	 */
-	return nmi_watchdog & 0x3;
-}
-#endif
-
-void lapic_watchdog_stop(void);
-int lapic_watchdog_init(unsigned nmi_hz);
-int lapic_wd_event(unsigned nmi_hz);
-unsigned lapic_adjust_nmi_hz(unsigned hz);
-int lapic_watchdog_ok(void);
-void disable_lapic_nmi_watchdog(void);
-void enable_lapic_nmi_watchdog(void);
-void stop_nmi(void);
-void restart_nmi(void);
-
-#endif /* ASM_X86__NMI_H */
diff --git a/include/asm-x86/nops.h b/include/asm-x86/nops.h
deleted file mode 100644
index ae74272..0000000
--- a/include/asm-x86/nops.h
+++ /dev/null
@@ -1,118 +0,0 @@
-#ifndef ASM_X86__NOPS_H
-#define ASM_X86__NOPS_H
-
-/* Define nops for use with alternative() */
-
-/* generic versions from gas
-   1: nop
-   the following instructions are NOT nops in 64-bit mode,
-   for 64-bit mode use K8 or P6 nops instead
-   2: movl %esi,%esi
-   3: leal 0x00(%esi),%esi
-   4: leal 0x00(,%esi,1),%esi
-   6: leal 0x00000000(%esi),%esi
-   7: leal 0x00000000(,%esi,1),%esi
-*/
-#define GENERIC_NOP1 ".byte 0x90\n"
-#define GENERIC_NOP2 ".byte 0x89,0xf6\n"
-#define GENERIC_NOP3 ".byte 0x8d,0x76,0x00\n"
-#define GENERIC_NOP4 ".byte 0x8d,0x74,0x26,0x00\n"
-#define GENERIC_NOP5 GENERIC_NOP1 GENERIC_NOP4
-#define GENERIC_NOP6 ".byte 0x8d,0xb6,0x00,0x00,0x00,0x00\n"
-#define GENERIC_NOP7 ".byte 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00\n"
-#define GENERIC_NOP8 GENERIC_NOP1 GENERIC_NOP7
-
-/* Opteron 64bit nops
-   1: nop
-   2: osp nop
-   3: osp osp nop
-   4: osp osp osp nop
-*/
-#define K8_NOP1 GENERIC_NOP1
-#define K8_NOP2	".byte 0x66,0x90\n"
-#define K8_NOP3	".byte 0x66,0x66,0x90\n"
-#define K8_NOP4	".byte 0x66,0x66,0x66,0x90\n"
-#define K8_NOP5	K8_NOP3 K8_NOP2
-#define K8_NOP6	K8_NOP3 K8_NOP3
-#define K8_NOP7	K8_NOP4 K8_NOP3
-#define K8_NOP8	K8_NOP4 K8_NOP4
-
-/* K7 nops
-   uses eax dependencies (arbitary choice)
-   1: nop
-   2: movl %eax,%eax
-   3: leal (,%eax,1),%eax
-   4: leal 0x00(,%eax,1),%eax
-   6: leal 0x00000000(%eax),%eax
-   7: leal 0x00000000(,%eax,1),%eax
-*/
-#define K7_NOP1	GENERIC_NOP1
-#define K7_NOP2	".byte 0x8b,0xc0\n"
-#define K7_NOP3	".byte 0x8d,0x04,0x20\n"
-#define K7_NOP4	".byte 0x8d,0x44,0x20,0x00\n"
-#define K7_NOP5	K7_NOP4 ASM_NOP1
-#define K7_NOP6	".byte 0x8d,0x80,0,0,0,0\n"
-#define K7_NOP7	".byte 0x8D,0x04,0x05,0,0,0,0\n"
-#define K7_NOP8	K7_NOP7 ASM_NOP1
-
-/* P6 nops
-   uses eax dependencies (Intel-recommended choice)
-   1: nop
-   2: osp nop
-   3: nopl (%eax)
-   4: nopl 0x00(%eax)
-   5: nopl 0x00(%eax,%eax,1)
-   6: osp nopl 0x00(%eax,%eax,1)
-   7: nopl 0x00000000(%eax)
-   8: nopl 0x00000000(%eax,%eax,1)
-*/
-#define P6_NOP1	GENERIC_NOP1
-#define P6_NOP2	".byte 0x66,0x90\n"
-#define P6_NOP3	".byte 0x0f,0x1f,0x00\n"
-#define P6_NOP4	".byte 0x0f,0x1f,0x40,0\n"
-#define P6_NOP5	".byte 0x0f,0x1f,0x44,0x00,0\n"
-#define P6_NOP6	".byte 0x66,0x0f,0x1f,0x44,0x00,0\n"
-#define P6_NOP7	".byte 0x0f,0x1f,0x80,0,0,0,0\n"
-#define P6_NOP8	".byte 0x0f,0x1f,0x84,0x00,0,0,0,0\n"
-
-#if defined(CONFIG_MK7)
-#define ASM_NOP1 K7_NOP1
-#define ASM_NOP2 K7_NOP2
-#define ASM_NOP3 K7_NOP3
-#define ASM_NOP4 K7_NOP4
-#define ASM_NOP5 K7_NOP5
-#define ASM_NOP6 K7_NOP6
-#define ASM_NOP7 K7_NOP7
-#define ASM_NOP8 K7_NOP8
-#elif defined(CONFIG_X86_P6_NOP)
-#define ASM_NOP1 P6_NOP1
-#define ASM_NOP2 P6_NOP2
-#define ASM_NOP3 P6_NOP3
-#define ASM_NOP4 P6_NOP4
-#define ASM_NOP5 P6_NOP5
-#define ASM_NOP6 P6_NOP6
-#define ASM_NOP7 P6_NOP7
-#define ASM_NOP8 P6_NOP8
-#elif defined(CONFIG_X86_64)
-#define ASM_NOP1 K8_NOP1
-#define ASM_NOP2 K8_NOP2
-#define ASM_NOP3 K8_NOP3
-#define ASM_NOP4 K8_NOP4
-#define ASM_NOP5 K8_NOP5
-#define ASM_NOP6 K8_NOP6
-#define ASM_NOP7 K8_NOP7
-#define ASM_NOP8 K8_NOP8
-#else
-#define ASM_NOP1 GENERIC_NOP1
-#define ASM_NOP2 GENERIC_NOP2
-#define ASM_NOP3 GENERIC_NOP3
-#define ASM_NOP4 GENERIC_NOP4
-#define ASM_NOP5 GENERIC_NOP5
-#define ASM_NOP6 GENERIC_NOP6
-#define ASM_NOP7 GENERIC_NOP7
-#define ASM_NOP8 GENERIC_NOP8
-#endif
-
-#define ASM_NOP_MAX 8
-
-#endif /* ASM_X86__NOPS_H */
diff --git a/include/asm-x86/numa_32.h b/include/asm-x86/numa_32.h
deleted file mode 100644
index 44cb078..0000000
--- a/include/asm-x86/numa_32.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef ASM_X86__NUMA_32_H
-#define ASM_X86__NUMA_32_H
-
-extern int pxm_to_nid(int pxm);
-extern void numa_remove_cpu(int cpu);
-
-#ifdef CONFIG_NUMA
-extern void set_highmem_pages_init(void);
-#endif
-
-#endif /* ASM_X86__NUMA_32_H */
diff --git a/include/asm-x86/numa_64.h b/include/asm-x86/numa_64.h
deleted file mode 100644
index 15c9903..0000000
--- a/include/asm-x86/numa_64.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef ASM_X86__NUMA_64_H
-#define ASM_X86__NUMA_64_H
-
-#include <linux/nodemask.h>
-#include <asm/apicdef.h>
-
-struct bootnode {
-	u64 start;
-	u64 end;
-};
-
-extern int compute_hash_shift(struct bootnode *nodes, int numblks,
-			      int *nodeids);
-
-#define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT))
-
-extern void numa_init_array(void);
-extern int numa_off;
-
-extern void srat_reserve_add_area(int nodeid);
-extern int hotadd_percent;
-
-extern s16 apicid_to_node[MAX_LOCAL_APIC];
-
-extern unsigned long numa_free_all_bootmem(void);
-extern void setup_node_bootmem(int nodeid, unsigned long start,
-			       unsigned long end);
-
-#ifdef CONFIG_NUMA
-extern void __init init_cpu_to_node(void);
-extern void __cpuinit numa_set_node(int cpu, int node);
-extern void __cpuinit numa_clear_node(int cpu);
-extern void __cpuinit numa_add_cpu(int cpu);
-extern void __cpuinit numa_remove_cpu(int cpu);
-#else
-static inline void init_cpu_to_node(void)		{ }
-static inline void numa_set_node(int cpu, int node)	{ }
-static inline void numa_clear_node(int cpu)		{ }
-static inline void numa_add_cpu(int cpu, int node)	{ }
-static inline void numa_remove_cpu(int cpu)		{ }
-#endif
-
-#endif /* ASM_X86__NUMA_64_H */
diff --git a/include/asm-x86/numaq.h b/include/asm-x86/numaq.h
deleted file mode 100644
index 124bf7d..0000000
--- a/include/asm-x86/numaq.h
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * Written by: Patricia Gaughen, IBM Corporation
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <gone@us.ibm.com>
- */
-
-#ifndef ASM_X86__NUMAQ_H
-#define ASM_X86__NUMAQ_H
-
-#ifdef CONFIG_X86_NUMAQ
-
-extern int found_numaq;
-extern int get_memcfg_numaq(void);
-
-/*
- * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the
- */
-#define SYS_CFG_DATA_PRIV_ADDR		0x0009d000 /* place for scd in private
-						      quad space */
-
-/*
- * Communication area for each processor on lynxer-processor tests.
- *
- * NOTE: If you change the size of this eachproc structure you need
- *       to change the definition for EACH_QUAD_SIZE.
- */
-struct eachquadmem {
-	unsigned int	priv_mem_start;		/* Starting address of this */
-						/* quad's private memory. */
-						/* This is always 0. */
-						/* In MB. */
-	unsigned int	priv_mem_size;		/* Size of this quad's */
-						/* private memory. */
-						/* In MB. */
-	unsigned int	low_shrd_mem_strp_start;/* Starting address of this */
-						/* quad's low shared block */
-						/* (untranslated). */
-						/* In MB. */
-	unsigned int	low_shrd_mem_start;	/* Starting address of this */
-						/* quad's low shared memory */
-						/* (untranslated). */
-						/* In MB. */
-	unsigned int	low_shrd_mem_size;	/* Size of this quad's low */
-						/* shared memory. */
-						/* In MB. */
-	unsigned int	lmmio_copb_start;	/* Starting address of this */
-						/* quad's local memory */
-						/* mapped I/O in the */
-						/* compatibility OPB. */
-						/* In MB. */
-	unsigned int	lmmio_copb_size;	/* Size of this quad's local */
-						/* memory mapped I/O in the */
-						/* compatibility OPB. */
-						/* In MB. */
-	unsigned int	lmmio_nopb_start;	/* Starting address of this */
-						/* quad's local memory */
-						/* mapped I/O in the */
-						/* non-compatibility OPB. */
-						/* In MB. */
-	unsigned int	lmmio_nopb_size;	/* Size of this quad's local */
-						/* memory mapped I/O in the */
-						/* non-compatibility OPB. */
-						/* In MB. */
-	unsigned int	io_apic_0_start;	/* Starting address of I/O */
-						/* APIC 0. */
-	unsigned int	io_apic_0_sz;		/* Size I/O APIC 0. */
-	unsigned int	io_apic_1_start;	/* Starting address of I/O */
-						/* APIC 1. */
-	unsigned int	io_apic_1_sz;		/* Size I/O APIC 1. */
-	unsigned int	hi_shrd_mem_start;	/* Starting address of this */
-						/* quad's high shared memory.*/
-						/* In MB. */
-	unsigned int	hi_shrd_mem_size;	/* Size of this quad's high */
-						/* shared memory. */
-						/* In MB. */
-	unsigned int	mps_table_addr;		/* Address of this quad's */
-						/* MPS tables from BIOS, */
-						/* in system space.*/
-	unsigned int	lcl_MDC_pio_addr;	/* Port-I/O address for */
-						/* local access of MDC. */
-	unsigned int	rmt_MDC_mmpio_addr;	/* MM-Port-I/O address for */
-						/* remote access of MDC. */
-	unsigned int	mm_port_io_start;	/* Starting address of this */
-						/* quad's memory mapped Port */
-						/* I/O space. */
-	unsigned int	mm_port_io_size;	/* Size of this quad's memory*/
-						/* mapped Port I/O space. */
-	unsigned int	mm_rmt_io_apic_start;	/* Starting address of this */
-						/* quad's memory mapped */
-						/* remote I/O APIC space. */
-	unsigned int	mm_rmt_io_apic_size;	/* Size of this quad's memory*/
-						/* mapped remote I/O APIC */
-						/* space. */
-	unsigned int	mm_isa_start;		/* Starting address of this */
-						/* quad's memory mapped ISA */
-						/* space (contains MDC */
-						/* memory space). */
-	unsigned int	mm_isa_size;		/* Size of this quad's memory*/
-						/* mapped ISA space (contains*/
-						/* MDC memory space). */
-	unsigned int	rmt_qmi_addr;		/* Remote addr to access QMI.*/
-	unsigned int	lcl_qmi_addr;		/* Local addr to access QMI. */
-};
-
-/*
- * Note: This structure must be NOT be changed unless the multiproc and
- * OS are changed to reflect the new structure.
- */
-struct sys_cfg_data {
-	unsigned int	quad_id;
-	unsigned int	bsp_proc_id; /* Boot Strap Processor in this quad. */
-	unsigned int	scd_version; /* Version number of this table. */
-	unsigned int	first_quad_id;
-	unsigned int	quads_present31_0; /* 1 bit for each quad */
-	unsigned int	quads_present63_32; /* 1 bit for each quad */
-	unsigned int	config_flags;
-	unsigned int	boot_flags;
-	unsigned int	csr_start_addr; /* Absolute value (not in MB) */
-	unsigned int	csr_size; /* Absolute value (not in MB) */
-	unsigned int	lcl_apic_start_addr; /* Absolute value (not in MB) */
-	unsigned int	lcl_apic_size; /* Absolute value (not in MB) */
-	unsigned int	low_shrd_mem_base; /* 0 or 512MB or 1GB */
-	unsigned int	low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */
-					/* may not be totally populated */
-	unsigned int	split_mem_enbl; /* 0 for no low shared memory */
-	unsigned int	mmio_sz; /* Size of total system memory mapped I/O */
-				 /* (in MB). */
-	unsigned int	quad_spin_lock; /* Spare location used for quad */
-					/* bringup. */
-	unsigned int	nonzero55; /* For checksumming. */
-	unsigned int	nonzeroaa; /* For checksumming. */
-	unsigned int	scd_magic_number;
-	unsigned int	system_type;
-	unsigned int	checksum;
-	/*
-	 *	memory configuration area for each quad
-	 */
-	struct		eachquadmem eq[MAX_NUMNODES];	/* indexed by quad id */
-};
-
-void numaq_tsc_disable(void);
-
-#else
-static inline int get_memcfg_numaq(void)
-{
-	return 0;
-}
-#endif /* CONFIG_X86_NUMAQ */
-#endif /* ASM_X86__NUMAQ_H */
-
diff --git a/include/asm-x86/olpc.h b/include/asm-x86/olpc.h
deleted file mode 100644
index d7328b1..0000000
--- a/include/asm-x86/olpc.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/* OLPC machine specific definitions */
-
-#ifndef ASM_X86__OLPC_H
-#define ASM_X86__OLPC_H
-
-#include <asm/geode.h>
-
-struct olpc_platform_t {
-	int flags;
-	uint32_t boardrev;
-	int ecver;
-};
-
-#define OLPC_F_PRESENT		0x01
-#define OLPC_F_DCON		0x02
-#define OLPC_F_VSA		0x04
-
-#ifdef CONFIG_OLPC
-
-extern struct olpc_platform_t olpc_platform_info;
-
-/*
- * OLPC board IDs contain the major build number within the mask 0x0ff0,
- * and the minor build number withing 0x000f.  Pre-builds have a minor
- * number less than 8, and normal builds start at 8.  For example, 0x0B10
- * is a PreB1, and 0x0C18 is a C1.
- */
-
-static inline uint32_t olpc_board(uint8_t id)
-{
-	return (id << 4) | 0x8;
-}
-
-static inline uint32_t olpc_board_pre(uint8_t id)
-{
-	return id << 4;
-}
-
-static inline int machine_is_olpc(void)
-{
-	return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0;
-}
-
-/*
- * The DCON is OLPC's Display Controller.  It has a number of unique
- * features that we might want to take advantage of..
- */
-static inline int olpc_has_dcon(void)
-{
-	return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0;
-}
-
-/*
- * The VSA is software from AMD that typical Geode bioses will include.
- * It is used to emulate the PCI bus, VGA, etc.  OLPC's Open Firmware does
- * not include the VSA; instead, PCI is emulated by the kernel.
- *
- * The VSA is described further in arch/x86/pci/olpc.c.
- */
-static inline int olpc_has_vsa(void)
-{
-	return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
-}
-
-/*
- * The "Mass Production" version of OLPC's XO is identified as being model
- * C2.  During the prototype phase, the following models (in chronological
- * order) were created: A1, B1, B2, B3, B4, C1.  The A1 through B2 models
- * were based on Geode GX CPUs, and models after that were based upon
- * Geode LX CPUs.  There were also some hand-assembled models floating
- * around, referred to as PreB1, PreB2, etc.
- */
-static inline int olpc_board_at_least(uint32_t rev)
-{
-	return olpc_platform_info.boardrev >= rev;
-}
-
-#else
-
-static inline int machine_is_olpc(void)
-{
-	return 0;
-}
-
-static inline int olpc_has_dcon(void)
-{
-	return 0;
-}
-
-static inline int olpc_has_vsa(void)
-{
-	return 0;
-}
-
-#endif
-
-/* EC related functions */
-
-extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
-		unsigned char *outbuf, size_t outlen);
-
-extern int olpc_ec_mask_set(uint8_t bits);
-extern int olpc_ec_mask_unset(uint8_t bits);
-
-/* EC commands */
-
-#define EC_FIRMWARE_REV		0x08
-
-/* SCI source values */
-
-#define EC_SCI_SRC_EMPTY	0x00
-#define EC_SCI_SRC_GAME		0x01
-#define EC_SCI_SRC_BATTERY	0x02
-#define EC_SCI_SRC_BATSOC	0x04
-#define EC_SCI_SRC_BATERR	0x08
-#define EC_SCI_SRC_EBOOK	0x10
-#define EC_SCI_SRC_WLAN		0x20
-#define EC_SCI_SRC_ACPWR	0x40
-#define EC_SCI_SRC_ALL		0x7F
-
-/* GPIO assignments */
-
-#define OLPC_GPIO_MIC_AC	geode_gpio(1)
-#define OLPC_GPIO_DCON_IRQ	geode_gpio(7)
-#define OLPC_GPIO_THRM_ALRM	geode_gpio(10)
-#define OLPC_GPIO_SMB_CLK	geode_gpio(14)
-#define OLPC_GPIO_SMB_DATA	geode_gpio(15)
-#define OLPC_GPIO_WORKAUX	geode_gpio(24)
-#define OLPC_GPIO_LID		geode_gpio(26)
-#define OLPC_GPIO_ECSCI		geode_gpio(27)
-
-#endif /* ASM_X86__OLPC_H */
diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h
deleted file mode 100644
index d4f1d57..0000000
--- a/include/asm-x86/page.h
+++ /dev/null
@@ -1,209 +0,0 @@
-#ifndef ASM_X86__PAGE_H
-#define ASM_X86__PAGE_H
-
-#include <linux/const.h>
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT	12
-#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK	(~(PAGE_SIZE-1))
-
-#ifdef __KERNEL__
-
-#define __PHYSICAL_MASK		((phys_addr_t)(1ULL << __PHYSICAL_MASK_SHIFT) - 1)
-#define __VIRTUAL_MASK		((1UL << __VIRTUAL_MASK_SHIFT) - 1)
-
-/* Cast PAGE_MASK to a signed type so that it is sign-extended if
-   virtual addresses are 32-bits but physical addresses are larger
-   (ie, 32-bit PAE). */
-#define PHYSICAL_PAGE_MASK	(((signed long)PAGE_MASK) & __PHYSICAL_MASK)
-
-/* PTE_PFN_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
-#define PTE_PFN_MASK		((pteval_t)PHYSICAL_PAGE_MASK)
-
-/* PTE_FLAGS_MASK extracts the flags from a (pte|pmd|pud|pgd)val_t */
-#define PTE_FLAGS_MASK		(~PTE_PFN_MASK)
-
-#define PMD_PAGE_SIZE		(_AC(1, UL) << PMD_SHIFT)
-#define PMD_PAGE_MASK		(~(PMD_PAGE_SIZE-1))
-
-#define HPAGE_SHIFT		PMD_SHIFT
-#define HPAGE_SIZE		(_AC(1,UL) << HPAGE_SHIFT)
-#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
-#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
-
-#define HUGE_MAX_HSTATE 2
-
-#ifndef __ASSEMBLY__
-#include <linux/types.h>
-#endif
-
-#ifdef CONFIG_X86_64
-#include <asm/page_64.h>
-#else
-#include <asm/page_32.h>
-#endif	/* CONFIG_X86_64 */
-
-#define PAGE_OFFSET		((unsigned long)__PAGE_OFFSET)
-
-#define VM_DATA_DEFAULT_FLAGS \
-	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
-	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-
-#ifndef __ASSEMBLY__
-
-typedef struct { pgdval_t pgd; } pgd_t;
-typedef struct { pgprotval_t pgprot; } pgprot_t;
-
-extern int page_is_ram(unsigned long pagenr);
-extern int pagerange_is_ram(unsigned long start, unsigned long end);
-extern int devmem_is_allowed(unsigned long pagenr);
-extern void map_devmem(unsigned long pfn, unsigned long size,
-		       pgprot_t vma_prot);
-extern void unmap_devmem(unsigned long pfn, unsigned long size,
-			 pgprot_t vma_prot);
-
-extern unsigned long max_low_pfn_mapped;
-extern unsigned long max_pfn_mapped;
-
-struct page;
-
-static inline void clear_user_page(void *page, unsigned long vaddr,
-				struct page *pg)
-{
-	clear_page(page);
-}
-
-static inline void copy_user_page(void *to, void *from, unsigned long vaddr,
-				struct page *topage)
-{
-	copy_page(to, from);
-}
-
-#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
-	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-
-static inline pgd_t native_make_pgd(pgdval_t val)
-{
-	return (pgd_t) { val };
-}
-
-static inline pgdval_t native_pgd_val(pgd_t pgd)
-{
-	return pgd.pgd;
-}
-
-#if PAGETABLE_LEVELS >= 3
-#if PAGETABLE_LEVELS == 4
-typedef struct { pudval_t pud; } pud_t;
-
-static inline pud_t native_make_pud(pmdval_t val)
-{
-	return (pud_t) { val };
-}
-
-static inline pudval_t native_pud_val(pud_t pud)
-{
-	return pud.pud;
-}
-#else	/* PAGETABLE_LEVELS == 3 */
-#include <asm-generic/pgtable-nopud.h>
-
-static inline pudval_t native_pud_val(pud_t pud)
-{
-	return native_pgd_val(pud.pgd);
-}
-#endif	/* PAGETABLE_LEVELS == 4 */
-
-typedef struct { pmdval_t pmd; } pmd_t;
-
-static inline pmd_t native_make_pmd(pmdval_t val)
-{
-	return (pmd_t) { val };
-}
-
-static inline pmdval_t native_pmd_val(pmd_t pmd)
-{
-	return pmd.pmd;
-}
-#else  /* PAGETABLE_LEVELS == 2 */
-#include <asm-generic/pgtable-nopmd.h>
-
-static inline pmdval_t native_pmd_val(pmd_t pmd)
-{
-	return native_pgd_val(pmd.pud.pgd);
-}
-#endif	/* PAGETABLE_LEVELS >= 3 */
-
-static inline pte_t native_make_pte(pteval_t val)
-{
-	return (pte_t) { .pte = val };
-}
-
-static inline pteval_t native_pte_val(pte_t pte)
-{
-	return pte.pte;
-}
-
-static inline pteval_t native_pte_flags(pte_t pte)
-{
-	return native_pte_val(pte) & PTE_FLAGS_MASK;
-}
-
-#define pgprot_val(x)	((x).pgprot)
-#define __pgprot(x)	((pgprot_t) { (x) } )
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else  /* !CONFIG_PARAVIRT */
-
-#define pgd_val(x)	native_pgd_val(x)
-#define __pgd(x)	native_make_pgd(x)
-
-#ifndef __PAGETABLE_PUD_FOLDED
-#define pud_val(x)	native_pud_val(x)
-#define __pud(x)	native_make_pud(x)
-#endif
-
-#ifndef __PAGETABLE_PMD_FOLDED
-#define pmd_val(x)	native_pmd_val(x)
-#define __pmd(x)	native_make_pmd(x)
-#endif
-
-#define pte_val(x)	native_pte_val(x)
-#define pte_flags(x)	native_pte_flags(x)
-#define __pte(x)	native_make_pte(x)
-
-#endif	/* CONFIG_PARAVIRT */
-
-#define __pa(x)		__phys_addr((unsigned long)(x))
-#define __pa_nodebug(x)	__phys_addr_nodebug((unsigned long)(x))
-/* __pa_symbol should be used for C visible symbols.
-   This seems to be the official gcc blessed way to do such arithmetic. */
-#define __pa_symbol(x)	__pa(__phys_reloc_hide((unsigned long)(x)))
-
-#define __va(x)			((void *)((unsigned long)(x)+PAGE_OFFSET))
-
-#define __boot_va(x)		__va(x)
-#define __boot_pa(x)		__pa(x)
-
-/*
- * virt_to_page(kaddr) returns a valid pointer if and only if
- * virt_addr_valid(kaddr) returns true.
- */
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_kaddr(pfn)      __va((pfn) << PAGE_SHIFT)
-extern bool __virt_addr_valid(unsigned long kaddr);
-#define virt_addr_valid(kaddr)	__virt_addr_valid((unsigned long) (kaddr))
-
-#endif	/* __ASSEMBLY__ */
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
-
-#define __HAVE_ARCH_GATE_AREA 1
-
-#endif	/* __KERNEL__ */
-#endif /* ASM_X86__PAGE_H */
diff --git a/include/asm-x86/page_32.h b/include/asm-x86/page_32.h
deleted file mode 100644
index bdf5dba..0000000
--- a/include/asm-x86/page_32.h
+++ /dev/null
@@ -1,136 +0,0 @@
-#ifndef ASM_X86__PAGE_32_H
-#define ASM_X86__PAGE_32_H
-
-/*
- * This handles the memory map.
- *
- * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
- * a virtual address space of one gigabyte, which limits the
- * amount of physical memory you can use to about 950MB.
- *
- * If you want more physical memory than this then see the CONFIG_HIGHMEM4G
- * and CONFIG_HIGHMEM64G options in the kernel configuration.
- */
-#define __PAGE_OFFSET		_AC(CONFIG_PAGE_OFFSET, UL)
-
-#ifdef CONFIG_4KSTACKS
-#define THREAD_ORDER	0
-#else
-#define THREAD_ORDER	1
-#endif
-#define THREAD_SIZE 	(PAGE_SIZE << THREAD_ORDER)
-
-#define STACKFAULT_STACK 0
-#define DOUBLEFAULT_STACK 1
-#define NMI_STACK 0
-#define DEBUG_STACK 0
-#define MCE_STACK 0
-#define N_EXCEPTION_STACKS 1
-
-#ifdef CONFIG_X86_PAE
-/* 44=32+12, the limit we can fit into an unsigned long pfn */
-#define __PHYSICAL_MASK_SHIFT	44
-#define __VIRTUAL_MASK_SHIFT	32
-#define PAGETABLE_LEVELS	3
-
-#ifndef __ASSEMBLY__
-typedef u64	pteval_t;
-typedef u64	pmdval_t;
-typedef u64	pudval_t;
-typedef u64	pgdval_t;
-typedef u64	pgprotval_t;
-
-typedef union {
-	struct {
-		unsigned long pte_low, pte_high;
-	};
-	pteval_t pte;
-} pte_t;
-#endif	/* __ASSEMBLY__
- */
-#else  /* !CONFIG_X86_PAE */
-#define __PHYSICAL_MASK_SHIFT	32
-#define __VIRTUAL_MASK_SHIFT	32
-#define PAGETABLE_LEVELS	2
-
-#ifndef __ASSEMBLY__
-typedef unsigned long	pteval_t;
-typedef unsigned long	pmdval_t;
-typedef unsigned long	pudval_t;
-typedef unsigned long	pgdval_t;
-typedef unsigned long	pgprotval_t;
-
-typedef union {
-	pteval_t pte;
-	pteval_t pte_low;
-} pte_t;
-
-#endif	/* __ASSEMBLY__ */
-#endif	/* CONFIG_X86_PAE */
-
-#ifndef __ASSEMBLY__
-typedef struct page *pgtable_t;
-#endif
-
-#ifdef CONFIG_HUGETLB_PAGE
-#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
-#endif
-
-#ifndef __ASSEMBLY__
-#define __phys_addr_nodebug(x)	((x) - PAGE_OFFSET)
-#ifdef CONFIG_DEBUG_VIRTUAL
-extern unsigned long __phys_addr(unsigned long);
-#else
-#define __phys_addr(x)		__phys_addr_nodebug(x)
-#endif
-#define __phys_reloc_hide(x)	RELOC_HIDE((x), 0)
-
-#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn)		((pfn) < max_mapnr)
-#endif /* CONFIG_FLATMEM */
-
-extern int nx_enabled;
-
-/*
- * This much address space is reserved for vmalloc() and iomap()
- * as well as fixmap mappings.
- */
-extern unsigned int __VMALLOC_RESERVE;
-extern int sysctl_legacy_va_layout;
-
-extern void find_low_pfn_range(void);
-extern unsigned long init_memory_mapping(unsigned long start,
-					 unsigned long end);
-extern void initmem_init(unsigned long, unsigned long);
-extern void free_initmem(void);
-extern void setup_bootmem_allocator(void);
-
-
-#ifdef CONFIG_X86_USE_3DNOW
-#include <asm/mmx.h>
-
-static inline void clear_page(void *page)
-{
-	mmx_clear_page(page);
-}
-
-static inline void copy_page(void *to, void *from)
-{
-	mmx_copy_page(to, from);
-}
-#else  /* !CONFIG_X86_USE_3DNOW */
-#include <linux/string.h>
-
-static inline void clear_page(void *page)
-{
-	memset(page, 0, PAGE_SIZE);
-}
-
-static inline void copy_page(void *to, void *from)
-{
-	memcpy(to, from, PAGE_SIZE);
-}
-#endif	/* CONFIG_X86_3DNOW */
-#endif	/* !__ASSEMBLY__ */
-
-#endif /* ASM_X86__PAGE_32_H */
diff --git a/include/asm-x86/page_64.h b/include/asm-x86/page_64.h
deleted file mode 100644
index 49380b8..0000000
--- a/include/asm-x86/page_64.h
+++ /dev/null
@@ -1,105 +0,0 @@
-#ifndef ASM_X86__PAGE_64_H
-#define ASM_X86__PAGE_64_H
-
-#define PAGETABLE_LEVELS	4
-
-#define THREAD_ORDER	1
-#define THREAD_SIZE  (PAGE_SIZE << THREAD_ORDER)
-#define CURRENT_MASK (~(THREAD_SIZE - 1))
-
-#define EXCEPTION_STACK_ORDER 0
-#define EXCEPTION_STKSZ (PAGE_SIZE << EXCEPTION_STACK_ORDER)
-
-#define DEBUG_STACK_ORDER (EXCEPTION_STACK_ORDER + 1)
-#define DEBUG_STKSZ (PAGE_SIZE << DEBUG_STACK_ORDER)
-
-#define IRQSTACK_ORDER 2
-#define IRQSTACKSIZE (PAGE_SIZE << IRQSTACK_ORDER)
-
-#define STACKFAULT_STACK 1
-#define DOUBLEFAULT_STACK 2
-#define NMI_STACK 3
-#define DEBUG_STACK 4
-#define MCE_STACK 5
-#define N_EXCEPTION_STACKS 5  /* hw limit: 7 */
-
-#define PUD_PAGE_SIZE		(_AC(1, UL) << PUD_SHIFT)
-#define PUD_PAGE_MASK		(~(PUD_PAGE_SIZE-1))
-
-/*
- * Set __PAGE_OFFSET to the most negative possible address +
- * PGDIR_SIZE*16 (pgd slot 272).  The gap is to allow a space for a
- * hypervisor to fit.  Choosing 16 slots here is arbitrary, but it's
- * what Xen requires.
- */
-#define __PAGE_OFFSET           _AC(0xffff880000000000, UL)
-
-#define __PHYSICAL_START	CONFIG_PHYSICAL_START
-#define __KERNEL_ALIGN		0x200000
-
-/*
- * Make sure kernel is aligned to 2MB address. Catching it at compile
- * time is better. Change your config file and compile the kernel
- * for a 2MB aligned address (CONFIG_PHYSICAL_START)
- */
-#if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0
-#error "CONFIG_PHYSICAL_START must be a multiple of 2MB"
-#endif
-
-#define __START_KERNEL		(__START_KERNEL_map + __PHYSICAL_START)
-#define __START_KERNEL_map	_AC(0xffffffff80000000, UL)
-
-/* See Documentation/x86_64/mm.txt for a description of the memory map. */
-#define __PHYSICAL_MASK_SHIFT	46
-#define __VIRTUAL_MASK_SHIFT	48
-
-/*
- * Kernel image size is limited to 512 MB (see level2_kernel_pgt in
- * arch/x86/kernel/head_64.S), and it is mapped here:
- */
-#define KERNEL_IMAGE_SIZE	(512 * 1024 * 1024)
-#define KERNEL_IMAGE_START	_AC(0xffffffff80000000, UL)
-
-#ifndef __ASSEMBLY__
-void clear_page(void *page);
-void copy_page(void *to, void *from);
-
-/* duplicated to the one in bootmem.h */
-extern unsigned long max_pfn;
-extern unsigned long phys_base;
-
-extern unsigned long __phys_addr(unsigned long);
-#define __phys_reloc_hide(x)	(x)
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef unsigned long	pteval_t;
-typedef unsigned long	pmdval_t;
-typedef unsigned long	pudval_t;
-typedef unsigned long	pgdval_t;
-typedef unsigned long	pgprotval_t;
-
-typedef struct page *pgtable_t;
-
-typedef struct { pteval_t pte; } pte_t;
-
-#define vmemmap ((struct page *)VMEMMAP_START)
-
-extern unsigned long init_memory_mapping(unsigned long start,
-					 unsigned long end);
-
-extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
-extern void free_initmem(void);
-
-extern void init_extra_mapping_uc(unsigned long phys, unsigned long size);
-extern void init_extra_mapping_wb(unsigned long phys, unsigned long size);
-
-#endif	/* !__ASSEMBLY__ */
-
-#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn)          ((pfn) < max_pfn)
-#endif
-
-
-#endif /* ASM_X86__PAGE_64_H */
diff --git a/include/asm-x86/param.h b/include/asm-x86/param.h
deleted file mode 100644
index 0009cfb..0000000
--- a/include/asm-x86/param.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef ASM_X86__PARAM_H
-#define ASM_X86__PARAM_H
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* some user interfaces are */
-# define CLOCKS_PER_SEC	(USER_HZ)       /* in "ticks" like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif /* ASM_X86__PARAM_H */
diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h
deleted file mode 100644
index 8d6ae2f..0000000
--- a/include/asm-x86/paravirt.h
+++ /dev/null
@@ -1,1650 +0,0 @@
-#ifndef ASM_X86__PARAVIRT_H
-#define ASM_X86__PARAVIRT_H
-/* Various instructions on x86 need to be replaced for
- * para-virtualization: those hooks are defined here. */
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/page.h>
-#include <asm/asm.h>
-
-/* Bitmask of what can be clobbered: usually at least eax. */
-#define CLBR_NONE 0
-#define CLBR_EAX  (1 << 0)
-#define CLBR_ECX  (1 << 1)
-#define CLBR_EDX  (1 << 2)
-
-#ifdef CONFIG_X86_64
-#define CLBR_RSI  (1 << 3)
-#define CLBR_RDI  (1 << 4)
-#define CLBR_R8   (1 << 5)
-#define CLBR_R9   (1 << 6)
-#define CLBR_R10  (1 << 7)
-#define CLBR_R11  (1 << 8)
-#define CLBR_ANY  ((1 << 9) - 1)
-#include <asm/desc_defs.h>
-#else
-/* CLBR_ANY should match all regs platform has. For i386, that's just it */
-#define CLBR_ANY  ((1 << 3) - 1)
-#endif /* X86_64 */
-
-#ifndef __ASSEMBLY__
-#include <linux/types.h>
-#include <linux/cpumask.h>
-#include <asm/kmap_types.h>
-#include <asm/desc_defs.h>
-
-struct page;
-struct thread_struct;
-struct desc_ptr;
-struct tss_struct;
-struct mm_struct;
-struct desc_struct;
-
-/* general info */
-struct pv_info {
-	unsigned int kernel_rpl;
-	int shared_kernel_pmd;
-	int paravirt_enabled;
-	const char *name;
-};
-
-struct pv_init_ops {
-	/*
-	 * Patch may replace one of the defined code sequences with
-	 * arbitrary code, subject to the same register constraints.
-	 * This generally means the code is not free to clobber any
-	 * registers other than EAX.  The patch function should return
-	 * the number of bytes of code generated, as we nop pad the
-	 * rest in generic code.
-	 */
-	unsigned (*patch)(u8 type, u16 clobber, void *insnbuf,
-			  unsigned long addr, unsigned len);
-
-	/* Basic arch-specific setup */
-	void (*arch_setup)(void);
-	char *(*memory_setup)(void);
-	void (*post_allocator_init)(void);
-
-	/* Print a banner to identify the environment */
-	void (*banner)(void);
-};
-
-
-struct pv_lazy_ops {
-	/* Set deferred update mode, used for batching operations. */
-	void (*enter)(void);
-	void (*leave)(void);
-};
-
-struct pv_time_ops {
-	void (*time_init)(void);
-
-	/* Set and set time of day */
-	unsigned long (*get_wallclock)(void);
-	int (*set_wallclock)(unsigned long);
-
-	unsigned long long (*sched_clock)(void);
-	unsigned long (*get_tsc_khz)(void);
-};
-
-struct pv_cpu_ops {
-	/* hooks for various privileged instructions */
-	unsigned long (*get_debugreg)(int regno);
-	void (*set_debugreg)(int regno, unsigned long value);
-
-	void (*clts)(void);
-
-	unsigned long (*read_cr0)(void);
-	void (*write_cr0)(unsigned long);
-
-	unsigned long (*read_cr4_safe)(void);
-	unsigned long (*read_cr4)(void);
-	void (*write_cr4)(unsigned long);
-
-#ifdef CONFIG_X86_64
-	unsigned long (*read_cr8)(void);
-	void (*write_cr8)(unsigned long);
-#endif
-
-	/* Segment descriptor handling */
-	void (*load_tr_desc)(void);
-	void (*load_gdt)(const struct desc_ptr *);
-	void (*load_idt)(const struct desc_ptr *);
-	void (*store_gdt)(struct desc_ptr *);
-	void (*store_idt)(struct desc_ptr *);
-	void (*set_ldt)(const void *desc, unsigned entries);
-	unsigned long (*store_tr)(void);
-	void (*load_tls)(struct thread_struct *t, unsigned int cpu);
-#ifdef CONFIG_X86_64
-	void (*load_gs_index)(unsigned int idx);
-#endif
-	void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum,
-				const void *desc);
-	void (*write_gdt_entry)(struct desc_struct *,
-				int entrynum, const void *desc, int size);
-	void (*write_idt_entry)(gate_desc *,
-				int entrynum, const gate_desc *gate);
-	void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries);
-	void (*free_ldt)(struct desc_struct *ldt, unsigned entries);
-
-	void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t);
-
-	void (*set_iopl_mask)(unsigned mask);
-
-	void (*wbinvd)(void);
-	void (*io_delay)(void);
-
-	/* cpuid emulation, mostly so that caps bits can be disabled */
-	void (*cpuid)(unsigned int *eax, unsigned int *ebx,
-		      unsigned int *ecx, unsigned int *edx);
-
-	/* MSR, PMC and TSR operations.
-	   err = 0/-EFAULT.  wrmsr returns 0/-EFAULT. */
-	u64 (*read_msr_amd)(unsigned int msr, int *err);
-	u64 (*read_msr)(unsigned int msr, int *err);
-	int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
-
-	u64 (*read_tsc)(void);
-	u64 (*read_pmc)(int counter);
-	unsigned long long (*read_tscp)(unsigned int *aux);
-
-	/*
-	 * Atomically enable interrupts and return to userspace.  This
-	 * is only ever used to return to 32-bit processes; in a
-	 * 64-bit kernel, it's used for 32-on-64 compat processes, but
-	 * never native 64-bit processes.  (Jump, not call.)
-	 */
-	void (*irq_enable_sysexit)(void);
-
-	/*
-	 * Switch to usermode gs and return to 64-bit usermode using
-	 * sysret.  Only used in 64-bit kernels to return to 64-bit
-	 * processes.  Usermode register state, including %rsp, must
-	 * already be restored.
-	 */
-	void (*usergs_sysret64)(void);
-
-	/*
-	 * Switch to usermode gs and return to 32-bit usermode using
-	 * sysret.  Used to return to 32-on-64 compat processes.
-	 * Other usermode register state, including %esp, must already
-	 * be restored.
-	 */
-	void (*usergs_sysret32)(void);
-
-	/* Normal iret.  Jump to this with the standard iret stack
-	   frame set up. */
-	void (*iret)(void);
-
-	void (*swapgs)(void);
-
-	struct pv_lazy_ops lazy_mode;
-};
-
-struct pv_irq_ops {
-	void (*init_IRQ)(void);
-
-	/*
-	 * Get/set interrupt state.  save_fl and restore_fl are only
-	 * expected to use X86_EFLAGS_IF; all other bits
-	 * returned from save_fl are undefined, and may be ignored by
-	 * restore_fl.
-	 */
-	unsigned long (*save_fl)(void);
-	void (*restore_fl)(unsigned long);
-	void (*irq_disable)(void);
-	void (*irq_enable)(void);
-	void (*safe_halt)(void);
-	void (*halt)(void);
-
-#ifdef CONFIG_X86_64
-	void (*adjust_exception_frame)(void);
-#endif
-};
-
-struct pv_apic_ops {
-#ifdef CONFIG_X86_LOCAL_APIC
-	void (*setup_boot_clock)(void);
-	void (*setup_secondary_clock)(void);
-
-	void (*startup_ipi_hook)(int phys_apicid,
-				 unsigned long start_eip,
-				 unsigned long start_esp);
-#endif
-};
-
-struct pv_mmu_ops {
-	/*
-	 * Called before/after init_mm pagetable setup. setup_start
-	 * may reset %cr3, and may pre-install parts of the pagetable;
-	 * pagetable setup is expected to preserve any existing
-	 * mapping.
-	 */
-	void (*pagetable_setup_start)(pgd_t *pgd_base);
-	void (*pagetable_setup_done)(pgd_t *pgd_base);
-
-	unsigned long (*read_cr2)(void);
-	void (*write_cr2)(unsigned long);
-
-	unsigned long (*read_cr3)(void);
-	void (*write_cr3)(unsigned long);
-
-	/*
-	 * Hooks for intercepting the creation/use/destruction of an
-	 * mm_struct.
-	 */
-	void (*activate_mm)(struct mm_struct *prev,
-			    struct mm_struct *next);
-	void (*dup_mmap)(struct mm_struct *oldmm,
-			 struct mm_struct *mm);
-	void (*exit_mmap)(struct mm_struct *mm);
-
-
-	/* TLB operations */
-	void (*flush_tlb_user)(void);
-	void (*flush_tlb_kernel)(void);
-	void (*flush_tlb_single)(unsigned long addr);
-	void (*flush_tlb_others)(const cpumask_t *cpus, struct mm_struct *mm,
-				 unsigned long va);
-
-	/* Hooks for allocating and freeing a pagetable top-level */
-	int  (*pgd_alloc)(struct mm_struct *mm);
-	void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd);
-
-	/*
-	 * Hooks for allocating/releasing pagetable pages when they're
-	 * attached to a pagetable
-	 */
-	void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn);
-	void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn);
-	void (*alloc_pmd_clone)(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count);
-	void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn);
-	void (*release_pte)(unsigned long pfn);
-	void (*release_pmd)(unsigned long pfn);
-	void (*release_pud)(unsigned long pfn);
-
-	/* Pagetable manipulation functions */
-	void (*set_pte)(pte_t *ptep, pte_t pteval);
-	void (*set_pte_at)(struct mm_struct *mm, unsigned long addr,
-			   pte_t *ptep, pte_t pteval);
-	void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval);
-	void (*pte_update)(struct mm_struct *mm, unsigned long addr,
-			   pte_t *ptep);
-	void (*pte_update_defer)(struct mm_struct *mm,
-				 unsigned long addr, pte_t *ptep);
-
-	pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr,
-					pte_t *ptep);
-	void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr,
-					pte_t *ptep, pte_t pte);
-
-	pteval_t (*pte_val)(pte_t);
-	pteval_t (*pte_flags)(pte_t);
-	pte_t (*make_pte)(pteval_t pte);
-
-	pgdval_t (*pgd_val)(pgd_t);
-	pgd_t (*make_pgd)(pgdval_t pgd);
-
-#if PAGETABLE_LEVELS >= 3
-#ifdef CONFIG_X86_PAE
-	void (*set_pte_atomic)(pte_t *ptep, pte_t pteval);
-	void (*set_pte_present)(struct mm_struct *mm, unsigned long addr,
-				pte_t *ptep, pte_t pte);
-	void (*pte_clear)(struct mm_struct *mm, unsigned long addr,
-			  pte_t *ptep);
-	void (*pmd_clear)(pmd_t *pmdp);
-
-#endif	/* CONFIG_X86_PAE */
-
-	void (*set_pud)(pud_t *pudp, pud_t pudval);
-
-	pmdval_t (*pmd_val)(pmd_t);
-	pmd_t (*make_pmd)(pmdval_t pmd);
-
-#if PAGETABLE_LEVELS == 4
-	pudval_t (*pud_val)(pud_t);
-	pud_t (*make_pud)(pudval_t pud);
-
-	void (*set_pgd)(pgd_t *pudp, pgd_t pgdval);
-#endif	/* PAGETABLE_LEVELS == 4 */
-#endif	/* PAGETABLE_LEVELS >= 3 */
-
-#ifdef CONFIG_HIGHPTE
-	void *(*kmap_atomic_pte)(struct page *page, enum km_type type);
-#endif
-
-	struct pv_lazy_ops lazy_mode;
-
-	/* dom0 ops */
-
-	/* Sometimes the physical address is a pfn, and sometimes its
-	   an mfn.  We can tell which is which from the index. */
-	void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
-			   unsigned long phys, pgprot_t flags);
-};
-
-struct raw_spinlock;
-struct pv_lock_ops {
-	int (*spin_is_locked)(struct raw_spinlock *lock);
-	int (*spin_is_contended)(struct raw_spinlock *lock);
-	void (*spin_lock)(struct raw_spinlock *lock);
-	void (*spin_lock_flags)(struct raw_spinlock *lock, unsigned long flags);
-	int (*spin_trylock)(struct raw_spinlock *lock);
-	void (*spin_unlock)(struct raw_spinlock *lock);
-};
-
-/* This contains all the paravirt structures: we get a convenient
- * number for each function using the offset which we use to indicate
- * what to patch. */
-struct paravirt_patch_template {
-	struct pv_init_ops pv_init_ops;
-	struct pv_time_ops pv_time_ops;
-	struct pv_cpu_ops pv_cpu_ops;
-	struct pv_irq_ops pv_irq_ops;
-	struct pv_apic_ops pv_apic_ops;
-	struct pv_mmu_ops pv_mmu_ops;
-	struct pv_lock_ops pv_lock_ops;
-};
-
-extern struct pv_info pv_info;
-extern struct pv_init_ops pv_init_ops;
-extern struct pv_time_ops pv_time_ops;
-extern struct pv_cpu_ops pv_cpu_ops;
-extern struct pv_irq_ops pv_irq_ops;
-extern struct pv_apic_ops pv_apic_ops;
-extern struct pv_mmu_ops pv_mmu_ops;
-extern struct pv_lock_ops pv_lock_ops;
-
-#define PARAVIRT_PATCH(x)					\
-	(offsetof(struct paravirt_patch_template, x) / sizeof(void *))
-
-#define paravirt_type(op)				\
-	[paravirt_typenum] "i" (PARAVIRT_PATCH(op)),	\
-	[paravirt_opptr] "m" (op)
-#define paravirt_clobber(clobber)		\
-	[paravirt_clobber] "i" (clobber)
-
-/*
- * Generate some code, and mark it as patchable by the
- * apply_paravirt() alternate instruction patcher.
- */
-#define _paravirt_alt(insn_string, type, clobber)	\
-	"771:\n\t" insn_string "\n" "772:\n"		\
-	".pushsection .parainstructions,\"a\"\n"	\
-	_ASM_ALIGN "\n"					\
-	_ASM_PTR " 771b\n"				\
-	"  .byte " type "\n"				\
-	"  .byte 772b-771b\n"				\
-	"  .short " clobber "\n"			\
-	".popsection\n"
-
-/* Generate patchable code, with the default asm parameters. */
-#define paravirt_alt(insn_string)					\
-	_paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
-
-/* Simple instruction patching code. */
-#define DEF_NATIVE(ops, name, code) 					\
-	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
-	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
-
-unsigned paravirt_patch_nop(void);
-unsigned paravirt_patch_ignore(unsigned len);
-unsigned paravirt_patch_call(void *insnbuf,
-			     const void *target, u16 tgt_clobbers,
-			     unsigned long addr, u16 site_clobbers,
-			     unsigned len);
-unsigned paravirt_patch_jmp(void *insnbuf, const void *target,
-			    unsigned long addr, unsigned len);
-unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
-				unsigned long addr, unsigned len);
-
-unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
-			      const char *start, const char *end);
-
-unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
-		      unsigned long addr, unsigned len);
-
-int paravirt_disable_iospace(void);
-
-/*
- * This generates an indirect call based on the operation type number.
- * The type number, computed in PARAVIRT_PATCH, is derived from the
- * offset into the paravirt_patch_template structure, and can therefore be
- * freely converted back into a structure offset.
- */
-#define PARAVIRT_CALL	"call *%[paravirt_opptr];"
-
-/*
- * These macros are intended to wrap calls through one of the paravirt
- * ops structs, so that they can be later identified and patched at
- * runtime.
- *
- * Normally, a call to a pv_op function is a simple indirect call:
- * (pv_op_struct.operations)(args...).
- *
- * Unfortunately, this is a relatively slow operation for modern CPUs,
- * because it cannot necessarily determine what the destination
- * address is.  In this case, the address is a runtime constant, so at
- * the very least we can patch the call to e a simple direct call, or
- * ideally, patch an inline implementation into the callsite.  (Direct
- * calls are essentially free, because the call and return addresses
- * are completely predictable.)
- *
- * For i386, these macros rely on the standard gcc "regparm(3)" calling
- * convention, in which the first three arguments are placed in %eax,
- * %edx, %ecx (in that order), and the remaining arguments are placed
- * on the stack.  All caller-save registers (eax,edx,ecx) are expected
- * to be modified (either clobbered or used for return values).
- * X86_64, on the other hand, already specifies a register-based calling
- * conventions, returning at %rax, with parameteres going on %rdi, %rsi,
- * %rdx, and %rcx. Note that for this reason, x86_64 does not need any
- * special handling for dealing with 4 arguments, unlike i386.
- * However, x86_64 also have to clobber all caller saved registers, which
- * unfortunately, are quite a bit (r8 - r11)
- *
- * The call instruction itself is marked by placing its start address
- * and size into the .parainstructions section, so that
- * apply_paravirt() in arch/i386/kernel/alternative.c can do the
- * appropriate patching under the control of the backend pv_init_ops
- * implementation.
- *
- * Unfortunately there's no way to get gcc to generate the args setup
- * for the call, and then allow the call itself to be generated by an
- * inline asm.  Because of this, we must do the complete arg setup and
- * return value handling from within these macros.  This is fairly
- * cumbersome.
- *
- * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments.
- * It could be extended to more arguments, but there would be little
- * to be gained from that.  For each number of arguments, there are
- * the two VCALL and CALL variants for void and non-void functions.
- *
- * When there is a return value, the invoker of the macro must specify
- * the return type.  The macro then uses sizeof() on that type to
- * determine whether its a 32 or 64 bit value, and places the return
- * in the right register(s) (just %eax for 32-bit, and %edx:%eax for
- * 64-bit). For x86_64 machines, it just returns at %rax regardless of
- * the return value size.
- *
- * 64-bit arguments are passed as a pair of adjacent 32-bit arguments
- * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments
- * in low,high order
- *
- * Small structures are passed and returned in registers.  The macro
- * calling convention can't directly deal with this, so the wrapper
- * functions must do this.
- *
- * These PVOP_* macros are only defined within this header.  This
- * means that all uses must be wrapped in inline functions.  This also
- * makes sure the incoming and outgoing types are always correct.
- */
-#ifdef CONFIG_X86_32
-#define PVOP_VCALL_ARGS			unsigned long __eax, __edx, __ecx
-#define PVOP_CALL_ARGS			PVOP_VCALL_ARGS
-#define PVOP_VCALL_CLOBBERS		"=a" (__eax), "=d" (__edx),	\
-					"=c" (__ecx)
-#define PVOP_CALL_CLOBBERS		PVOP_VCALL_CLOBBERS
-#define EXTRA_CLOBBERS
-#define VEXTRA_CLOBBERS
-#else
-#define PVOP_VCALL_ARGS		unsigned long __edi, __esi, __edx, __ecx
-#define PVOP_CALL_ARGS		PVOP_VCALL_ARGS, __eax
-#define PVOP_VCALL_CLOBBERS	"=D" (__edi),				\
-				"=S" (__esi), "=d" (__edx),		\
-				"=c" (__ecx)
-
-#define PVOP_CALL_CLOBBERS	PVOP_VCALL_CLOBBERS, "=a" (__eax)
-
-#define EXTRA_CLOBBERS	 , "r8", "r9", "r10", "r11"
-#define VEXTRA_CLOBBERS	 , "rax", "r8", "r9", "r10", "r11"
-#endif
-
-#ifdef CONFIG_PARAVIRT_DEBUG
-#define PVOP_TEST_NULL(op)	BUG_ON(op == NULL)
-#else
-#define PVOP_TEST_NULL(op)	((void)op)
-#endif
-
-#define __PVOP_CALL(rettype, op, pre, post, ...)			\
-	({								\
-		rettype __ret;						\
-		PVOP_CALL_ARGS;					\
-		PVOP_TEST_NULL(op);					\
-		/* This is 32-bit specific, but is okay in 64-bit */	\
-		/* since this condition will never hold */		\
-		if (sizeof(rettype) > sizeof(unsigned long)) {		\
-			asm volatile(pre				\
-				     paravirt_alt(PARAVIRT_CALL)	\
-				     post				\
-				     : PVOP_CALL_CLOBBERS		\
-				     : paravirt_type(op),		\
-				       paravirt_clobber(CLBR_ANY),	\
-				       ##__VA_ARGS__			\
-				     : "memory", "cc" EXTRA_CLOBBERS);	\
-			__ret = (rettype)((((u64)__edx) << 32) | __eax); \
-		} else {						\
-			asm volatile(pre				\
-				     paravirt_alt(PARAVIRT_CALL)	\
-				     post				\
-				     : PVOP_CALL_CLOBBERS		\
-				     : paravirt_type(op),		\
-				       paravirt_clobber(CLBR_ANY),	\
-				       ##__VA_ARGS__			\
-				     : "memory", "cc" EXTRA_CLOBBERS);	\
-			__ret = (rettype)__eax;				\
-		}							\
-		__ret;							\
-	})
-#define __PVOP_VCALL(op, pre, post, ...)				\
-	({								\
-		PVOP_VCALL_ARGS;					\
-		PVOP_TEST_NULL(op);					\
-		asm volatile(pre					\
-			     paravirt_alt(PARAVIRT_CALL)		\
-			     post					\
-			     : PVOP_VCALL_CLOBBERS			\
-			     : paravirt_type(op),			\
-			       paravirt_clobber(CLBR_ANY),		\
-			       ##__VA_ARGS__				\
-			     : "memory", "cc" VEXTRA_CLOBBERS);		\
-	})
-
-#define PVOP_CALL0(rettype, op)						\
-	__PVOP_CALL(rettype, op, "", "")
-#define PVOP_VCALL0(op)							\
-	__PVOP_VCALL(op, "", "")
-
-#define PVOP_CALL1(rettype, op, arg1)					\
-	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)))
-#define PVOP_VCALL1(op, arg1)						\
-	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)))
-
-#define PVOP_CALL2(rettype, op, arg1, arg2)				\
-	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)), 	\
-	"1" ((unsigned long)(arg2)))
-#define PVOP_VCALL2(op, arg1, arg2)					\
-	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)), 		\
-	"1" ((unsigned long)(arg2)))
-
-#define PVOP_CALL3(rettype, op, arg1, arg2, arg3)			\
-	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)),	\
-	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)))
-#define PVOP_VCALL3(op, arg1, arg2, arg3)				\
-	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)),		\
-	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)))
-
-/* This is the only difference in x86_64. We can make it much simpler */
-#ifdef CONFIG_X86_32
-#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
-	__PVOP_CALL(rettype, op,					\
-		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
-		    "0" ((u32)(arg1)), "1" ((u32)(arg2)),		\
-		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
-#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
-	__PVOP_VCALL(op,						\
-		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
-		    "0" ((u32)(arg1)), "1" ((u32)(arg2)),		\
-		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
-#else
-#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
-	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)),	\
-	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)),		\
-	"3"((unsigned long)(arg4)))
-#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
-	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)),		\
-	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)),		\
-	"3"((unsigned long)(arg4)))
-#endif
-
-static inline int paravirt_enabled(void)
-{
-	return pv_info.paravirt_enabled;
-}
-
-static inline void load_sp0(struct tss_struct *tss,
-			     struct thread_struct *thread)
-{
-	PVOP_VCALL2(pv_cpu_ops.load_sp0, tss, thread);
-}
-
-#define ARCH_SETUP			pv_init_ops.arch_setup();
-static inline unsigned long get_wallclock(void)
-{
-	return PVOP_CALL0(unsigned long, pv_time_ops.get_wallclock);
-}
-
-static inline int set_wallclock(unsigned long nowtime)
-{
-	return PVOP_CALL1(int, pv_time_ops.set_wallclock, nowtime);
-}
-
-static inline void (*choose_time_init(void))(void)
-{
-	return pv_time_ops.time_init;
-}
-
-/* The paravirtualized CPUID instruction. */
-static inline void __cpuid(unsigned int *eax, unsigned int *ebx,
-			   unsigned int *ecx, unsigned int *edx)
-{
-	PVOP_VCALL4(pv_cpu_ops.cpuid, eax, ebx, ecx, edx);
-}
-
-/*
- * These special macros can be used to get or set a debugging register
- */
-static inline unsigned long paravirt_get_debugreg(int reg)
-{
-	return PVOP_CALL1(unsigned long, pv_cpu_ops.get_debugreg, reg);
-}
-#define get_debugreg(var, reg) var = paravirt_get_debugreg(reg)
-static inline void set_debugreg(unsigned long val, int reg)
-{
-	PVOP_VCALL2(pv_cpu_ops.set_debugreg, reg, val);
-}
-
-static inline void clts(void)
-{
-	PVOP_VCALL0(pv_cpu_ops.clts);
-}
-
-static inline unsigned long read_cr0(void)
-{
-	return PVOP_CALL0(unsigned long, pv_cpu_ops.read_cr0);
-}
-
-static inline void write_cr0(unsigned long x)
-{
-	PVOP_VCALL1(pv_cpu_ops.write_cr0, x);
-}
-
-static inline unsigned long read_cr2(void)
-{
-	return PVOP_CALL0(unsigned long, pv_mmu_ops.read_cr2);
-}
-
-static inline void write_cr2(unsigned long x)
-{
-	PVOP_VCALL1(pv_mmu_ops.write_cr2, x);
-}
-
-static inline unsigned long read_cr3(void)
-{
-	return PVOP_CALL0(unsigned long, pv_mmu_ops.read_cr3);
-}
-
-static inline void write_cr3(unsigned long x)
-{
-	PVOP_VCALL1(pv_mmu_ops.write_cr3, x);
-}
-
-static inline unsigned long read_cr4(void)
-{
-	return PVOP_CALL0(unsigned long, pv_cpu_ops.read_cr4);
-}
-static inline unsigned long read_cr4_safe(void)
-{
-	return PVOP_CALL0(unsigned long, pv_cpu_ops.read_cr4_safe);
-}
-
-static inline void write_cr4(unsigned long x)
-{
-	PVOP_VCALL1(pv_cpu_ops.write_cr4, x);
-}
-
-#ifdef CONFIG_X86_64
-static inline unsigned long read_cr8(void)
-{
-	return PVOP_CALL0(unsigned long, pv_cpu_ops.read_cr8);
-}
-
-static inline void write_cr8(unsigned long x)
-{
-	PVOP_VCALL1(pv_cpu_ops.write_cr8, x);
-}
-#endif
-
-static inline void raw_safe_halt(void)
-{
-	PVOP_VCALL0(pv_irq_ops.safe_halt);
-}
-
-static inline void halt(void)
-{
-	PVOP_VCALL0(pv_irq_ops.safe_halt);
-}
-
-static inline void wbinvd(void)
-{
-	PVOP_VCALL0(pv_cpu_ops.wbinvd);
-}
-
-#define get_kernel_rpl()  (pv_info.kernel_rpl)
-
-static inline u64 paravirt_read_msr(unsigned msr, int *err)
-{
-	return PVOP_CALL2(u64, pv_cpu_ops.read_msr, msr, err);
-}
-static inline u64 paravirt_read_msr_amd(unsigned msr, int *err)
-{
-	return PVOP_CALL2(u64, pv_cpu_ops.read_msr_amd, msr, err);
-}
-static inline int paravirt_write_msr(unsigned msr, unsigned low, unsigned high)
-{
-	return PVOP_CALL3(int, pv_cpu_ops.write_msr, msr, low, high);
-}
-
-/* These should all do BUG_ON(_err), but our headers are too tangled. */
-#define rdmsr(msr, val1, val2)			\
-do {						\
-	int _err;				\
-	u64 _l = paravirt_read_msr(msr, &_err);	\
-	val1 = (u32)_l;				\
-	val2 = _l >> 32;			\
-} while (0)
-
-#define wrmsr(msr, val1, val2)			\
-do {						\
-	paravirt_write_msr(msr, val1, val2);	\
-} while (0)
-
-#define rdmsrl(msr, val)			\
-do {						\
-	int _err;				\
-	val = paravirt_read_msr(msr, &_err);	\
-} while (0)
-
-#define wrmsrl(msr, val)	wrmsr(msr, (u32)((u64)(val)), ((u64)(val))>>32)
-#define wrmsr_safe(msr, a, b)	paravirt_write_msr(msr, a, b)
-
-/* rdmsr with exception handling */
-#define rdmsr_safe(msr, a, b)			\
-({						\
-	int _err;				\
-	u64 _l = paravirt_read_msr(msr, &_err);	\
-	(*a) = (u32)_l;				\
-	(*b) = _l >> 32;			\
-	_err;					\
-})
-
-static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
-{
-	int err;
-
-	*p = paravirt_read_msr(msr, &err);
-	return err;
-}
-static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
-{
-	int err;
-
-	*p = paravirt_read_msr_amd(msr, &err);
-	return err;
-}
-
-static inline u64 paravirt_read_tsc(void)
-{
-	return PVOP_CALL0(u64, pv_cpu_ops.read_tsc);
-}
-
-#define rdtscl(low)				\
-do {						\
-	u64 _l = paravirt_read_tsc();		\
-	low = (int)_l;				\
-} while (0)
-
-#define rdtscll(val) (val = paravirt_read_tsc())
-
-static inline unsigned long long paravirt_sched_clock(void)
-{
-	return PVOP_CALL0(unsigned long long, pv_time_ops.sched_clock);
-}
-#define calibrate_tsc() (pv_time_ops.get_tsc_khz())
-
-static inline unsigned long long paravirt_read_pmc(int counter)
-{
-	return PVOP_CALL1(u64, pv_cpu_ops.read_pmc, counter);
-}
-
-#define rdpmc(counter, low, high)		\
-do {						\
-	u64 _l = paravirt_read_pmc(counter);	\
-	low = (u32)_l;				\
-	high = _l >> 32;			\
-} while (0)
-
-static inline unsigned long long paravirt_rdtscp(unsigned int *aux)
-{
-	return PVOP_CALL1(u64, pv_cpu_ops.read_tscp, aux);
-}
-
-#define rdtscp(low, high, aux)				\
-do {							\
-	int __aux;					\
-	unsigned long __val = paravirt_rdtscp(&__aux);	\
-	(low) = (u32)__val;				\
-	(high) = (u32)(__val >> 32);			\
-	(aux) = __aux;					\
-} while (0)
-
-#define rdtscpll(val, aux)				\
-do {							\
-	unsigned long __aux; 				\
-	val = paravirt_rdtscp(&__aux);			\
-	(aux) = __aux;					\
-} while (0)
-
-static inline void paravirt_alloc_ldt(struct desc_struct *ldt, unsigned entries)
-{
-	PVOP_VCALL2(pv_cpu_ops.alloc_ldt, ldt, entries);
-}
-
-static inline void paravirt_free_ldt(struct desc_struct *ldt, unsigned entries)
-{
-	PVOP_VCALL2(pv_cpu_ops.free_ldt, ldt, entries);
-}
-
-static inline void load_TR_desc(void)
-{
-	PVOP_VCALL0(pv_cpu_ops.load_tr_desc);
-}
-static inline void load_gdt(const struct desc_ptr *dtr)
-{
-	PVOP_VCALL1(pv_cpu_ops.load_gdt, dtr);
-}
-static inline void load_idt(const struct desc_ptr *dtr)
-{
-	PVOP_VCALL1(pv_cpu_ops.load_idt, dtr);
-}
-static inline void set_ldt(const void *addr, unsigned entries)
-{
-	PVOP_VCALL2(pv_cpu_ops.set_ldt, addr, entries);
-}
-static inline void store_gdt(struct desc_ptr *dtr)
-{
-	PVOP_VCALL1(pv_cpu_ops.store_gdt, dtr);
-}
-static inline void store_idt(struct desc_ptr *dtr)
-{
-	PVOP_VCALL1(pv_cpu_ops.store_idt, dtr);
-}
-static inline unsigned long paravirt_store_tr(void)
-{
-	return PVOP_CALL0(unsigned long, pv_cpu_ops.store_tr);
-}
-#define store_tr(tr)	((tr) = paravirt_store_tr())
-static inline void load_TLS(struct thread_struct *t, unsigned cpu)
-{
-	PVOP_VCALL2(pv_cpu_ops.load_tls, t, cpu);
-}
-
-#ifdef CONFIG_X86_64
-static inline void load_gs_index(unsigned int gs)
-{
-	PVOP_VCALL1(pv_cpu_ops.load_gs_index, gs);
-}
-#endif
-
-static inline void write_ldt_entry(struct desc_struct *dt, int entry,
-				   const void *desc)
-{
-	PVOP_VCALL3(pv_cpu_ops.write_ldt_entry, dt, entry, desc);
-}
-
-static inline void write_gdt_entry(struct desc_struct *dt, int entry,
-				   void *desc, int type)
-{
-	PVOP_VCALL4(pv_cpu_ops.write_gdt_entry, dt, entry, desc, type);
-}
-
-static inline void write_idt_entry(gate_desc *dt, int entry, const gate_desc *g)
-{
-	PVOP_VCALL3(pv_cpu_ops.write_idt_entry, dt, entry, g);
-}
-static inline void set_iopl_mask(unsigned mask)
-{
-	PVOP_VCALL1(pv_cpu_ops.set_iopl_mask, mask);
-}
-
-/* The paravirtualized I/O functions */
-static inline void slow_down_io(void)
-{
-	pv_cpu_ops.io_delay();
-#ifdef REALLY_SLOW_IO
-	pv_cpu_ops.io_delay();
-	pv_cpu_ops.io_delay();
-	pv_cpu_ops.io_delay();
-#endif
-}
-
-#ifdef CONFIG_X86_LOCAL_APIC
-static inline void setup_boot_clock(void)
-{
-	PVOP_VCALL0(pv_apic_ops.setup_boot_clock);
-}
-
-static inline void setup_secondary_clock(void)
-{
-	PVOP_VCALL0(pv_apic_ops.setup_secondary_clock);
-}
-#endif
-
-static inline void paravirt_post_allocator_init(void)
-{
-	if (pv_init_ops.post_allocator_init)
-		(*pv_init_ops.post_allocator_init)();
-}
-
-static inline void paravirt_pagetable_setup_start(pgd_t *base)
-{
-	(*pv_mmu_ops.pagetable_setup_start)(base);
-}
-
-static inline void paravirt_pagetable_setup_done(pgd_t *base)
-{
-	(*pv_mmu_ops.pagetable_setup_done)(base);
-}
-
-#ifdef CONFIG_SMP
-static inline void startup_ipi_hook(int phys_apicid, unsigned long start_eip,
-				    unsigned long start_esp)
-{
-	PVOP_VCALL3(pv_apic_ops.startup_ipi_hook,
-		    phys_apicid, start_eip, start_esp);
-}
-#endif
-
-static inline void paravirt_activate_mm(struct mm_struct *prev,
-					struct mm_struct *next)
-{
-	PVOP_VCALL2(pv_mmu_ops.activate_mm, prev, next);
-}
-
-static inline void arch_dup_mmap(struct mm_struct *oldmm,
-				 struct mm_struct *mm)
-{
-	PVOP_VCALL2(pv_mmu_ops.dup_mmap, oldmm, mm);
-}
-
-static inline void arch_exit_mmap(struct mm_struct *mm)
-{
-	PVOP_VCALL1(pv_mmu_ops.exit_mmap, mm);
-}
-
-static inline void __flush_tlb(void)
-{
-	PVOP_VCALL0(pv_mmu_ops.flush_tlb_user);
-}
-static inline void __flush_tlb_global(void)
-{
-	PVOP_VCALL0(pv_mmu_ops.flush_tlb_kernel);
-}
-static inline void __flush_tlb_single(unsigned long addr)
-{
-	PVOP_VCALL1(pv_mmu_ops.flush_tlb_single, addr);
-}
-
-static inline void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
-				    unsigned long va)
-{
-	PVOP_VCALL3(pv_mmu_ops.flush_tlb_others, &cpumask, mm, va);
-}
-
-static inline int paravirt_pgd_alloc(struct mm_struct *mm)
-{
-	return PVOP_CALL1(int, pv_mmu_ops.pgd_alloc, mm);
-}
-
-static inline void paravirt_pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	PVOP_VCALL2(pv_mmu_ops.pgd_free, mm, pgd);
-}
-
-static inline void paravirt_alloc_pte(struct mm_struct *mm, unsigned long pfn)
-{
-	PVOP_VCALL2(pv_mmu_ops.alloc_pte, mm, pfn);
-}
-static inline void paravirt_release_pte(unsigned long pfn)
-{
-	PVOP_VCALL1(pv_mmu_ops.release_pte, pfn);
-}
-
-static inline void paravirt_alloc_pmd(struct mm_struct *mm, unsigned long pfn)
-{
-	PVOP_VCALL2(pv_mmu_ops.alloc_pmd, mm, pfn);
-}
-
-static inline void paravirt_alloc_pmd_clone(unsigned long pfn, unsigned long clonepfn,
-					    unsigned long start, unsigned long count)
-{
-	PVOP_VCALL4(pv_mmu_ops.alloc_pmd_clone, pfn, clonepfn, start, count);
-}
-static inline void paravirt_release_pmd(unsigned long pfn)
-{
-	PVOP_VCALL1(pv_mmu_ops.release_pmd, pfn);
-}
-
-static inline void paravirt_alloc_pud(struct mm_struct *mm, unsigned long pfn)
-{
-	PVOP_VCALL2(pv_mmu_ops.alloc_pud, mm, pfn);
-}
-static inline void paravirt_release_pud(unsigned long pfn)
-{
-	PVOP_VCALL1(pv_mmu_ops.release_pud, pfn);
-}
-
-#ifdef CONFIG_HIGHPTE
-static inline void *kmap_atomic_pte(struct page *page, enum km_type type)
-{
-	unsigned long ret;
-	ret = PVOP_CALL2(unsigned long, pv_mmu_ops.kmap_atomic_pte, page, type);
-	return (void *)ret;
-}
-#endif
-
-static inline void pte_update(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep)
-{
-	PVOP_VCALL3(pv_mmu_ops.pte_update, mm, addr, ptep);
-}
-
-static inline void pte_update_defer(struct mm_struct *mm, unsigned long addr,
-				    pte_t *ptep)
-{
-	PVOP_VCALL3(pv_mmu_ops.pte_update_defer, mm, addr, ptep);
-}
-
-static inline pte_t __pte(pteval_t val)
-{
-	pteval_t ret;
-
-	if (sizeof(pteval_t) > sizeof(long))
-		ret = PVOP_CALL2(pteval_t,
-				 pv_mmu_ops.make_pte,
-				 val, (u64)val >> 32);
-	else
-		ret = PVOP_CALL1(pteval_t,
-				 pv_mmu_ops.make_pte,
-				 val);
-
-	return (pte_t) { .pte = ret };
-}
-
-static inline pteval_t pte_val(pte_t pte)
-{
-	pteval_t ret;
-
-	if (sizeof(pteval_t) > sizeof(long))
-		ret = PVOP_CALL2(pteval_t, pv_mmu_ops.pte_val,
-				 pte.pte, (u64)pte.pte >> 32);
-	else
-		ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_val,
-				 pte.pte);
-
-	return ret;
-}
-
-static inline pteval_t pte_flags(pte_t pte)
-{
-	pteval_t ret;
-
-	if (sizeof(pteval_t) > sizeof(long))
-		ret = PVOP_CALL2(pteval_t, pv_mmu_ops.pte_flags,
-				 pte.pte, (u64)pte.pte >> 32);
-	else
-		ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_flags,
-				 pte.pte);
-
-#ifdef CONFIG_PARAVIRT_DEBUG
-	BUG_ON(ret & PTE_PFN_MASK);
-#endif
-	return ret;
-}
-
-static inline pgd_t __pgd(pgdval_t val)
-{
-	pgdval_t ret;
-
-	if (sizeof(pgdval_t) > sizeof(long))
-		ret = PVOP_CALL2(pgdval_t, pv_mmu_ops.make_pgd,
-				 val, (u64)val >> 32);
-	else
-		ret = PVOP_CALL1(pgdval_t, pv_mmu_ops.make_pgd,
-				 val);
-
-	return (pgd_t) { ret };
-}
-
-static inline pgdval_t pgd_val(pgd_t pgd)
-{
-	pgdval_t ret;
-
-	if (sizeof(pgdval_t) > sizeof(long))
-		ret =  PVOP_CALL2(pgdval_t, pv_mmu_ops.pgd_val,
-				  pgd.pgd, (u64)pgd.pgd >> 32);
-	else
-		ret =  PVOP_CALL1(pgdval_t, pv_mmu_ops.pgd_val,
-				  pgd.pgd);
-
-	return ret;
-}
-
-#define  __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION
-static inline pte_t ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr,
-					   pte_t *ptep)
-{
-	pteval_t ret;
-
-	ret = PVOP_CALL3(pteval_t, pv_mmu_ops.ptep_modify_prot_start,
-			 mm, addr, ptep);
-
-	return (pte_t) { .pte = ret };
-}
-
-static inline void ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
-					   pte_t *ptep, pte_t pte)
-{
-	if (sizeof(pteval_t) > sizeof(long))
-		/* 5 arg words */
-		pv_mmu_ops.ptep_modify_prot_commit(mm, addr, ptep, pte);
-	else
-		PVOP_VCALL4(pv_mmu_ops.ptep_modify_prot_commit,
-			    mm, addr, ptep, pte.pte);
-}
-
-static inline void set_pte(pte_t *ptep, pte_t pte)
-{
-	if (sizeof(pteval_t) > sizeof(long))
-		PVOP_VCALL3(pv_mmu_ops.set_pte, ptep,
-			    pte.pte, (u64)pte.pte >> 32);
-	else
-		PVOP_VCALL2(pv_mmu_ops.set_pte, ptep,
-			    pte.pte);
-}
-
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep, pte_t pte)
-{
-	if (sizeof(pteval_t) > sizeof(long))
-		/* 5 arg words */
-		pv_mmu_ops.set_pte_at(mm, addr, ptep, pte);
-	else
-		PVOP_VCALL4(pv_mmu_ops.set_pte_at, mm, addr, ptep, pte.pte);
-}
-
-static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
-{
-	pmdval_t val = native_pmd_val(pmd);
-
-	if (sizeof(pmdval_t) > sizeof(long))
-		PVOP_VCALL3(pv_mmu_ops.set_pmd, pmdp, val, (u64)val >> 32);
-	else
-		PVOP_VCALL2(pv_mmu_ops.set_pmd, pmdp, val);
-}
-
-#if PAGETABLE_LEVELS >= 3
-static inline pmd_t __pmd(pmdval_t val)
-{
-	pmdval_t ret;
-
-	if (sizeof(pmdval_t) > sizeof(long))
-		ret = PVOP_CALL2(pmdval_t, pv_mmu_ops.make_pmd,
-				 val, (u64)val >> 32);
-	else
-		ret = PVOP_CALL1(pmdval_t, pv_mmu_ops.make_pmd,
-				 val);
-
-	return (pmd_t) { ret };
-}
-
-static inline pmdval_t pmd_val(pmd_t pmd)
-{
-	pmdval_t ret;
-
-	if (sizeof(pmdval_t) > sizeof(long))
-		ret =  PVOP_CALL2(pmdval_t, pv_mmu_ops.pmd_val,
-				  pmd.pmd, (u64)pmd.pmd >> 32);
-	else
-		ret =  PVOP_CALL1(pmdval_t, pv_mmu_ops.pmd_val,
-				  pmd.pmd);
-
-	return ret;
-}
-
-static inline void set_pud(pud_t *pudp, pud_t pud)
-{
-	pudval_t val = native_pud_val(pud);
-
-	if (sizeof(pudval_t) > sizeof(long))
-		PVOP_VCALL3(pv_mmu_ops.set_pud, pudp,
-			    val, (u64)val >> 32);
-	else
-		PVOP_VCALL2(pv_mmu_ops.set_pud, pudp,
-			    val);
-}
-#if PAGETABLE_LEVELS == 4
-static inline pud_t __pud(pudval_t val)
-{
-	pudval_t ret;
-
-	if (sizeof(pudval_t) > sizeof(long))
-		ret = PVOP_CALL2(pudval_t, pv_mmu_ops.make_pud,
-				 val, (u64)val >> 32);
-	else
-		ret = PVOP_CALL1(pudval_t, pv_mmu_ops.make_pud,
-				 val);
-
-	return (pud_t) { ret };
-}
-
-static inline pudval_t pud_val(pud_t pud)
-{
-	pudval_t ret;
-
-	if (sizeof(pudval_t) > sizeof(long))
-		ret =  PVOP_CALL2(pudval_t, pv_mmu_ops.pud_val,
-				  pud.pud, (u64)pud.pud >> 32);
-	else
-		ret =  PVOP_CALL1(pudval_t, pv_mmu_ops.pud_val,
-				  pud.pud);
-
-	return ret;
-}
-
-static inline void set_pgd(pgd_t *pgdp, pgd_t pgd)
-{
-	pgdval_t val = native_pgd_val(pgd);
-
-	if (sizeof(pgdval_t) > sizeof(long))
-		PVOP_VCALL3(pv_mmu_ops.set_pgd, pgdp,
-			    val, (u64)val >> 32);
-	else
-		PVOP_VCALL2(pv_mmu_ops.set_pgd, pgdp,
-			    val);
-}
-
-static inline void pgd_clear(pgd_t *pgdp)
-{
-	set_pgd(pgdp, __pgd(0));
-}
-
-static inline void pud_clear(pud_t *pudp)
-{
-	set_pud(pudp, __pud(0));
-}
-
-#endif	/* PAGETABLE_LEVELS == 4 */
-
-#endif	/* PAGETABLE_LEVELS >= 3 */
-
-#ifdef CONFIG_X86_PAE
-/* Special-case pte-setting operations for PAE, which can't update a
-   64-bit pte atomically */
-static inline void set_pte_atomic(pte_t *ptep, pte_t pte)
-{
-	PVOP_VCALL3(pv_mmu_ops.set_pte_atomic, ptep,
-		    pte.pte, pte.pte >> 32);
-}
-
-static inline void set_pte_present(struct mm_struct *mm, unsigned long addr,
-				   pte_t *ptep, pte_t pte)
-{
-	/* 5 arg words */
-	pv_mmu_ops.set_pte_present(mm, addr, ptep, pte);
-}
-
-static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
-			     pte_t *ptep)
-{
-	PVOP_VCALL3(pv_mmu_ops.pte_clear, mm, addr, ptep);
-}
-
-static inline void pmd_clear(pmd_t *pmdp)
-{
-	PVOP_VCALL1(pv_mmu_ops.pmd_clear, pmdp);
-}
-#else  /* !CONFIG_X86_PAE */
-static inline void set_pte_atomic(pte_t *ptep, pte_t pte)
-{
-	set_pte(ptep, pte);
-}
-
-static inline void set_pte_present(struct mm_struct *mm, unsigned long addr,
-				   pte_t *ptep, pte_t pte)
-{
-	set_pte(ptep, pte);
-}
-
-static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
-			     pte_t *ptep)
-{
-	set_pte_at(mm, addr, ptep, __pte(0));
-}
-
-static inline void pmd_clear(pmd_t *pmdp)
-{
-	set_pmd(pmdp, __pmd(0));
-}
-#endif	/* CONFIG_X86_PAE */
-
-/* Lazy mode for batching updates / context switch */
-enum paravirt_lazy_mode {
-	PARAVIRT_LAZY_NONE,
-	PARAVIRT_LAZY_MMU,
-	PARAVIRT_LAZY_CPU,
-};
-
-enum paravirt_lazy_mode paravirt_get_lazy_mode(void);
-void paravirt_enter_lazy_cpu(void);
-void paravirt_leave_lazy_cpu(void);
-void paravirt_enter_lazy_mmu(void);
-void paravirt_leave_lazy_mmu(void);
-void paravirt_leave_lazy(enum paravirt_lazy_mode mode);
-
-#define  __HAVE_ARCH_ENTER_LAZY_CPU_MODE
-static inline void arch_enter_lazy_cpu_mode(void)
-{
-	PVOP_VCALL0(pv_cpu_ops.lazy_mode.enter);
-}
-
-static inline void arch_leave_lazy_cpu_mode(void)
-{
-	PVOP_VCALL0(pv_cpu_ops.lazy_mode.leave);
-}
-
-static inline void arch_flush_lazy_cpu_mode(void)
-{
-	if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU)) {
-		arch_leave_lazy_cpu_mode();
-		arch_enter_lazy_cpu_mode();
-	}
-}
-
-
-#define  __HAVE_ARCH_ENTER_LAZY_MMU_MODE
-static inline void arch_enter_lazy_mmu_mode(void)
-{
-	PVOP_VCALL0(pv_mmu_ops.lazy_mode.enter);
-}
-
-static inline void arch_leave_lazy_mmu_mode(void)
-{
-	PVOP_VCALL0(pv_mmu_ops.lazy_mode.leave);
-}
-
-static inline void arch_flush_lazy_mmu_mode(void)
-{
-	if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU)) {
-		arch_leave_lazy_mmu_mode();
-		arch_enter_lazy_mmu_mode();
-	}
-}
-
-static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
-				unsigned long phys, pgprot_t flags)
-{
-	pv_mmu_ops.set_fixmap(idx, phys, flags);
-}
-
-void _paravirt_nop(void);
-#define paravirt_nop	((void *)_paravirt_nop)
-
-void paravirt_use_bytelocks(void);
-
-#ifdef CONFIG_SMP
-
-static inline int __raw_spin_is_locked(struct raw_spinlock *lock)
-{
-	return PVOP_CALL1(int, pv_lock_ops.spin_is_locked, lock);
-}
-
-static inline int __raw_spin_is_contended(struct raw_spinlock *lock)
-{
-	return PVOP_CALL1(int, pv_lock_ops.spin_is_contended, lock);
-}
-
-static __always_inline void __raw_spin_lock(struct raw_spinlock *lock)
-{
-	PVOP_VCALL1(pv_lock_ops.spin_lock, lock);
-}
-
-static __always_inline void __raw_spin_lock_flags(struct raw_spinlock *lock,
-						  unsigned long flags)
-{
-	PVOP_VCALL2(pv_lock_ops.spin_lock_flags, lock, flags);
-}
-
-static __always_inline int __raw_spin_trylock(struct raw_spinlock *lock)
-{
-	return PVOP_CALL1(int, pv_lock_ops.spin_trylock, lock);
-}
-
-static __always_inline void __raw_spin_unlock(struct raw_spinlock *lock)
-{
-	PVOP_VCALL1(pv_lock_ops.spin_unlock, lock);
-}
-
-#endif
-
-/* These all sit in the .parainstructions section to tell us what to patch. */
-struct paravirt_patch_site {
-	u8 *instr; 		/* original instructions */
-	u8 instrtype;		/* type of this instruction */
-	u8 len;			/* length of original instruction */
-	u16 clobbers;		/* what registers you may clobber */
-};
-
-extern struct paravirt_patch_site __parainstructions[],
-	__parainstructions_end[];
-
-#ifdef CONFIG_X86_32
-#define PV_SAVE_REGS "pushl %%ecx; pushl %%edx;"
-#define PV_RESTORE_REGS "popl %%edx; popl %%ecx"
-#define PV_FLAGS_ARG "0"
-#define PV_EXTRA_CLOBBERS
-#define PV_VEXTRA_CLOBBERS
-#else
-/* We save some registers, but all of them, that's too much. We clobber all
- * caller saved registers but the argument parameter */
-#define PV_SAVE_REGS "pushq %%rdi;"
-#define PV_RESTORE_REGS "popq %%rdi;"
-#define PV_EXTRA_CLOBBERS EXTRA_CLOBBERS, "rcx" , "rdx", "rsi"
-#define PV_VEXTRA_CLOBBERS EXTRA_CLOBBERS, "rdi", "rcx" , "rdx", "rsi"
-#define PV_FLAGS_ARG "D"
-#endif
-
-static inline unsigned long __raw_local_save_flags(void)
-{
-	unsigned long f;
-
-	asm volatile(paravirt_alt(PV_SAVE_REGS
-				  PARAVIRT_CALL
-				  PV_RESTORE_REGS)
-		     : "=a"(f)
-		     : paravirt_type(pv_irq_ops.save_fl),
-		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "cc" PV_VEXTRA_CLOBBERS);
-	return f;
-}
-
-static inline void raw_local_irq_restore(unsigned long f)
-{
-	asm volatile(paravirt_alt(PV_SAVE_REGS
-				  PARAVIRT_CALL
-				  PV_RESTORE_REGS)
-		     : "=a"(f)
-		     : PV_FLAGS_ARG(f),
-		       paravirt_type(pv_irq_ops.restore_fl),
-		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "cc" PV_EXTRA_CLOBBERS);
-}
-
-static inline void raw_local_irq_disable(void)
-{
-	asm volatile(paravirt_alt(PV_SAVE_REGS
-				  PARAVIRT_CALL
-				  PV_RESTORE_REGS)
-		     :
-		     : paravirt_type(pv_irq_ops.irq_disable),
-		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "eax", "cc" PV_EXTRA_CLOBBERS);
-}
-
-static inline void raw_local_irq_enable(void)
-{
-	asm volatile(paravirt_alt(PV_SAVE_REGS
-				  PARAVIRT_CALL
-				  PV_RESTORE_REGS)
-		     :
-		     : paravirt_type(pv_irq_ops.irq_enable),
-		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "eax", "cc" PV_EXTRA_CLOBBERS);
-}
-
-static inline unsigned long __raw_local_irq_save(void)
-{
-	unsigned long f;
-
-	f = __raw_local_save_flags();
-	raw_local_irq_disable();
-	return f;
-}
-
-
-/* Make sure as little as possible of this mess escapes. */
-#undef PARAVIRT_CALL
-#undef __PVOP_CALL
-#undef __PVOP_VCALL
-#undef PVOP_VCALL0
-#undef PVOP_CALL0
-#undef PVOP_VCALL1
-#undef PVOP_CALL1
-#undef PVOP_VCALL2
-#undef PVOP_CALL2
-#undef PVOP_VCALL3
-#undef PVOP_CALL3
-#undef PVOP_VCALL4
-#undef PVOP_CALL4
-
-#else  /* __ASSEMBLY__ */
-
-#define _PVSITE(ptype, clobbers, ops, word, algn)	\
-771:;						\
-	ops;					\
-772:;						\
-	.pushsection .parainstructions,"a";	\
-	 .align	algn;				\
-	 word 771b;				\
-	 .byte ptype;				\
-	 .byte 772b-771b;			\
-	 .short clobbers;			\
-	.popsection
-
-
-#ifdef CONFIG_X86_64
-#define PV_SAVE_REGS				\
-	push %rax;				\
-	push %rcx;				\
-	push %rdx;				\
-	push %rsi;				\
-	push %rdi;				\
-	push %r8;				\
-	push %r9;				\
-	push %r10;				\
-	push %r11
-#define PV_RESTORE_REGS				\
-	pop %r11;				\
-	pop %r10;				\
-	pop %r9;				\
-	pop %r8;				\
-	pop %rdi;				\
-	pop %rsi;				\
-	pop %rdx;				\
-	pop %rcx;				\
-	pop %rax
-#define PARA_PATCH(struct, off)        ((PARAVIRT_PATCH_##struct + (off)) / 8)
-#define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .quad, 8)
-#define PARA_INDIRECT(addr)	*addr(%rip)
-#else
-#define PV_SAVE_REGS   pushl %eax; pushl %edi; pushl %ecx; pushl %edx
-#define PV_RESTORE_REGS popl %edx; popl %ecx; popl %edi; popl %eax
-#define PARA_PATCH(struct, off)        ((PARAVIRT_PATCH_##struct + (off)) / 4)
-#define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .long, 4)
-#define PARA_INDIRECT(addr)	*%cs:addr
-#endif
-
-#define INTERRUPT_RETURN						\
-	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_iret), CLBR_NONE,	\
-		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_iret))
-
-#define DISABLE_INTERRUPTS(clobbers)					\
-	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_disable), clobbers, \
-		  PV_SAVE_REGS;						\
-		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_disable);	\
-		  PV_RESTORE_REGS;)			\
-
-#define ENABLE_INTERRUPTS(clobbers)					\
-	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_enable), clobbers,	\
-		  PV_SAVE_REGS;						\
-		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_enable);	\
-		  PV_RESTORE_REGS;)
-
-#define USERGS_SYSRET32							\
-	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret32),	\
-		  CLBR_NONE,						\
-		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_usergs_sysret32))
-
-#ifdef CONFIG_X86_32
-#define GET_CR0_INTO_EAX				\
-	push %ecx; push %edx;				\
-	call PARA_INDIRECT(pv_cpu_ops+PV_CPU_read_cr0);	\
-	pop %edx; pop %ecx
-
-#define ENABLE_INTERRUPTS_SYSEXIT					\
-	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_irq_enable_sysexit),	\
-		  CLBR_NONE,						\
-		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_irq_enable_sysexit))
-
-
-#else	/* !CONFIG_X86_32 */
-
-/*
- * If swapgs is used while the userspace stack is still current,
- * there's no way to call a pvop.  The PV replacement *must* be
- * inlined, or the swapgs instruction must be trapped and emulated.
- */
-#define SWAPGS_UNSAFE_STACK						\
-	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE,	\
-		  swapgs)
-
-#define SWAPGS								\
-	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE,	\
-		  PV_SAVE_REGS;						\
-		  call PARA_INDIRECT(pv_cpu_ops+PV_CPU_swapgs);		\
-		  PV_RESTORE_REGS					\
-		 )
-
-#define GET_CR2_INTO_RCX				\
-	call PARA_INDIRECT(pv_mmu_ops+PV_MMU_read_cr2);	\
-	movq %rax, %rcx;				\
-	xorq %rax, %rax;
-
-#define PARAVIRT_ADJUST_EXCEPTION_FRAME					\
-	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_adjust_exception_frame), \
-		  CLBR_NONE,						\
-		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_adjust_exception_frame))
-
-#define USERGS_SYSRET64							\
-	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret64),	\
-		  CLBR_NONE,						\
-		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_usergs_sysret64))
-
-#define ENABLE_INTERRUPTS_SYSEXIT32					\
-	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_irq_enable_sysexit),	\
-		  CLBR_NONE,						\
-		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_irq_enable_sysexit))
-#endif	/* CONFIG_X86_32 */
-
-#endif /* __ASSEMBLY__ */
-#endif /* CONFIG_PARAVIRT */
-#endif /* ASM_X86__PARAVIRT_H */
diff --git a/include/asm-x86/parport.h b/include/asm-x86/parport.h
deleted file mode 100644
index 2e3dda4..0000000
--- a/include/asm-x86/parport.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef ASM_X86__PARPORT_H
-#define ASM_X86__PARPORT_H
-
-static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
-{
-	return parport_pc_find_isa_ports(autoirq, autodma);
-}
-
-#endif /* ASM_X86__PARPORT_H */
diff --git a/include/asm-x86/pat.h b/include/asm-x86/pat.h
deleted file mode 100644
index 482c3e3..0000000
--- a/include/asm-x86/pat.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef ASM_X86__PAT_H
-#define ASM_X86__PAT_H
-
-#include <linux/types.h>
-
-#ifdef CONFIG_X86_PAT
-extern int pat_enabled;
-extern void validate_pat_support(struct cpuinfo_x86 *c);
-#else
-static const int pat_enabled;
-static inline void validate_pat_support(struct cpuinfo_x86 *c) { }
-#endif
-
-extern void pat_init(void);
-
-extern int reserve_memtype(u64 start, u64 end,
-		unsigned long req_type, unsigned long *ret_type);
-extern int free_memtype(u64 start, u64 end);
-
-extern void pat_disable(char *reason);
-
-#endif /* ASM_X86__PAT_H */
diff --git a/include/asm-x86/pci-direct.h b/include/asm-x86/pci-direct.h
deleted file mode 100644
index da42be0..0000000
--- a/include/asm-x86/pci-direct.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef ASM_X86__PCI_DIRECT_H
-#define ASM_X86__PCI_DIRECT_H
-
-#include <linux/types.h>
-
-/* Direct PCI access. This is used for PCI accesses in early boot before
-   the PCI subsystem works. */
-
-extern u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset);
-extern u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset);
-extern u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset);
-extern void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, u32 val);
-extern void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val);
-extern void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val);
-
-extern int early_pci_allowed(void);
-
-extern unsigned int pci_early_dump_regs;
-extern void early_dump_pci_device(u8 bus, u8 slot, u8 func);
-extern void early_dump_pci_devices(void);
-#endif /* ASM_X86__PCI_DIRECT_H */
diff --git a/include/asm-x86/pci.h b/include/asm-x86/pci.h
deleted file mode 100644
index 6025831..0000000
--- a/include/asm-x86/pci.h
+++ /dev/null
@@ -1,114 +0,0 @@
-#ifndef ASM_X86__PCI_H
-#define ASM_X86__PCI_H
-
-#include <linux/mm.h> /* for struct page */
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <asm/scatterlist.h>
-#include <asm/io.h>
-
-#ifdef __KERNEL__
-
-struct pci_sysdata {
-	int		domain;		/* PCI domain */
-	int		node;		/* NUMA node */
-#ifdef CONFIG_X86_64
-	void		*iommu;		/* IOMMU private data */
-#endif
-};
-
-extern int pci_routeirq;
-
-/* scan a bus after allocating a pci_sysdata for it */
-extern struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops,
-					    int node);
-extern struct pci_bus *pci_scan_bus_with_sysdata(int busno);
-
-static inline int pci_domain_nr(struct pci_bus *bus)
-{
-	struct pci_sysdata *sd = bus->sysdata;
-	return sd->domain;
-}
-
-static inline int pci_proc_domain(struct pci_bus *bus)
-{
-	return pci_domain_nr(bus);
-}
-
-
-/* Can be used to override the logic in pci_scan_bus for skipping
-   already-configured bus numbers - to be used for buggy BIOSes
-   or architectures with incomplete PCI setup by the loader */
-
-#ifdef CONFIG_PCI
-extern unsigned int pcibios_assign_all_busses(void);
-#else
-#define pcibios_assign_all_busses()	0
-#endif
-#define pcibios_scan_all_fns(a, b)	0
-
-extern unsigned long pci_mem_start;
-#define PCIBIOS_MIN_IO		0x1000
-#define PCIBIOS_MIN_MEM		(pci_mem_start)
-
-#define PCIBIOS_MIN_CARDBUS_IO	0x4000
-
-void pcibios_config_init(void);
-struct pci_bus *pcibios_scan_root(int bus);
-
-void pcibios_set_master(struct pci_dev *dev);
-void pcibios_penalize_isa_irq(int irq, int active);
-struct irq_routing_table *pcibios_get_irq_routing_table(void);
-int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
-
-
-#define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			       enum pci_mmap_state mmap_state,
-			       int write_combine);
-
-
-#ifdef CONFIG_PCI
-extern void early_quirks(void);
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-					enum pci_dma_burst_strategy *strat,
-					unsigned long *strategy_parameter)
-{
-	*strat = PCI_DMA_BURST_INFINITY;
-	*strategy_parameter = ~0UL;
-}
-#else
-static inline void early_quirks(void) { }
-#endif
-
-#endif  /* __KERNEL__ */
-
-#ifdef CONFIG_X86_32
-# include "pci_32.h"
-#else
-# include "pci_64.h"
-#endif
-
-/* implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
-/* generic pci stuff */
-#include <asm-generic/pci.h>
-
-#ifdef CONFIG_NUMA
-/* Returns the node based on pci bus */
-static inline int __pcibus_to_node(struct pci_bus *bus)
-{
-	struct pci_sysdata *sd = bus->sysdata;
-
-	return sd->node;
-}
-
-static inline cpumask_t __pcibus_to_cpumask(struct pci_bus *bus)
-{
-	return node_to_cpumask(__pcibus_to_node(bus));
-}
-#endif
-
-#endif /* ASM_X86__PCI_H */
diff --git a/include/asm-x86/pci_32.h b/include/asm-x86/pci_32.h
deleted file mode 100644
index 3f22882..0000000
--- a/include/asm-x86/pci_32.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef ASM_X86__PCI_32_H
-#define ASM_X86__PCI_32_H
-
-
-#ifdef __KERNEL__
-
-
-/* Dynamic DMA mapping stuff.
- * i386 has everything mapped statically.
- */
-
-struct pci_dev;
-
-/* The PCI address space does equal the physical memory
- * address space.  The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS	(1)
-
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME[0];
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)	unsigned LEN_NAME[0];
-#define pci_unmap_addr(PTR, ADDR_NAME)	sizeof((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
-	do { break; } while (pci_unmap_addr(PTR, ADDR_NAME))
-#define pci_unmap_len(PTR, LEN_NAME)		sizeof((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
-	do { break; } while (pci_unmap_len(PTR, LEN_NAME))
-
-
-#endif /* __KERNEL__ */
-
-
-#endif /* ASM_X86__PCI_32_H */
diff --git a/include/asm-x86/pci_64.h b/include/asm-x86/pci_64.h
deleted file mode 100644
index f72e12d..0000000
--- a/include/asm-x86/pci_64.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef ASM_X86__PCI_64_H
-#define ASM_X86__PCI_64_H
-
-#ifdef __KERNEL__
-
-#ifdef CONFIG_CALGARY_IOMMU
-static inline void *pci_iommu(struct pci_bus *bus)
-{
-	struct pci_sysdata *sd = bus->sysdata;
-	return sd->iommu;
-}
-
-static inline void set_pci_iommu(struct pci_bus *bus, void *val)
-{
-	struct pci_sysdata *sd = bus->sysdata;
-	sd->iommu = val;
-}
-#endif /* CONFIG_CALGARY_IOMMU */
-
-extern int (*pci_config_read)(int seg, int bus, int dev, int fn,
-			      int reg, int len, u32 *value);
-extern int (*pci_config_write)(int seg, int bus, int dev, int fn,
-			       int reg, int len, u32 value);
-
-extern void dma32_reserve_bootmem(void);
-extern void pci_iommu_alloc(void);
-
-/* The PCI address space does equal the physical memory
- * address space.  The networking and block device layers use
- * this boolean for bounce buffer decisions
- *
- * On AMD64 it mostly equals, but we set it to zero if a hardware
- * IOMMU (gart) of sotware IOMMU (swiotlb) is available.
- */
-#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
-
-#if defined(CONFIG_GART_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
-#else
-/* No IOMMU */
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* ASM_X86__PCI_64_H */
diff --git a/include/asm-x86/pda.h b/include/asm-x86/pda.h
deleted file mode 100644
index 80860af..0000000
--- a/include/asm-x86/pda.h
+++ /dev/null
@@ -1,137 +0,0 @@
-#ifndef ASM_X86__PDA_H
-#define ASM_X86__PDA_H
-
-#ifndef __ASSEMBLY__
-#include <linux/stddef.h>
-#include <linux/types.h>
-#include <linux/cache.h>
-#include <asm/page.h>
-
-/* Per processor datastructure. %gs points to it while the kernel runs */
-struct x8664_pda {
-	struct task_struct *pcurrent;	/* 0  Current process */
-	unsigned long data_offset;	/* 8 Per cpu data offset from linker
-					   address */
-	unsigned long kernelstack;	/* 16 top of kernel stack for current */
-	unsigned long oldrsp;		/* 24 user rsp for system call */
-	int irqcount;			/* 32 Irq nesting counter. Starts -1 */
-	unsigned int cpunumber;		/* 36 Logical CPU number */
-#ifdef CONFIG_CC_STACKPROTECTOR
-	unsigned long stack_canary;	/* 40 stack canary value */
-					/* gcc-ABI: this canary MUST be at
-					   offset 40!!! */
-#endif
-	char *irqstackptr;
-	short nodenumber;		/* number of current node (32k max) */
-	short in_bootmem;		/* pda lives in bootmem */
-	unsigned int __softirq_pending;
-	unsigned int __nmi_count;	/* number of NMI on this CPUs */
-	short mmu_state;
-	short isidle;
-	struct mm_struct *active_mm;
-	unsigned apic_timer_irqs;
-	unsigned irq0_irqs;
-	unsigned irq_resched_count;
-	unsigned irq_call_count;
-	unsigned irq_tlb_count;
-	unsigned irq_thermal_count;
-	unsigned irq_threshold_count;
-	unsigned irq_spurious_count;
-} ____cacheline_aligned_in_smp;
-
-extern struct x8664_pda **_cpu_pda;
-extern void pda_init(int);
-
-#define cpu_pda(i) (_cpu_pda[i])
-
-/*
- * There is no fast way to get the base address of the PDA, all the accesses
- * have to mention %fs/%gs.  So it needs to be done this Torvaldian way.
- */
-extern void __bad_pda_field(void) __attribute__((noreturn));
-
-/*
- * proxy_pda doesn't actually exist, but tell gcc it is accessed for
- * all PDA accesses so it gets read/write dependencies right.
- */
-extern struct x8664_pda _proxy_pda;
-
-#define pda_offset(field) offsetof(struct x8664_pda, field)
-
-#define pda_to_op(op, field, val)					\
-do {									\
-	typedef typeof(_proxy_pda.field) T__;				\
-	if (0) { T__ tmp__; tmp__ = (val); }	/* type checking */	\
-	switch (sizeof(_proxy_pda.field)) {				\
-	case 2:								\
-		asm(op "w %1,%%gs:%c2" :				\
-		    "+m" (_proxy_pda.field) :				\
-		    "ri" ((T__)val),					\
-		    "i"(pda_offset(field)));				\
-		break;							\
-	case 4:								\
-		asm(op "l %1,%%gs:%c2" :				\
-		    "+m" (_proxy_pda.field) :				\
-		    "ri" ((T__)val),					\
-		    "i" (pda_offset(field)));				\
-		break;							\
-	case 8:								\
-		asm(op "q %1,%%gs:%c2":					\
-		    "+m" (_proxy_pda.field) :				\
-		    "ri" ((T__)val),					\
-		    "i"(pda_offset(field)));				\
-		break;							\
-	default:							\
-		__bad_pda_field();					\
-	}								\
-} while (0)
-
-#define pda_from_op(op, field)			\
-({						\
-	typeof(_proxy_pda.field) ret__;		\
-	switch (sizeof(_proxy_pda.field)) {	\
-	case 2:					\
-		asm(op "w %%gs:%c1,%0" :	\
-		    "=r" (ret__) :		\
-		    "i" (pda_offset(field)),	\
-		    "m" (_proxy_pda.field));	\
-		break;				\
-	case 4:					\
-		asm(op "l %%gs:%c1,%0":		\
-		    "=r" (ret__):		\
-		    "i" (pda_offset(field)),	\
-		    "m" (_proxy_pda.field));	\
-		break;				\
-	case 8:					\
-		asm(op "q %%gs:%c1,%0":		\
-		    "=r" (ret__) :		\
-		    "i" (pda_offset(field)),	\
-		    "m" (_proxy_pda.field));	\
-		break;				\
-	default:				\
-		__bad_pda_field();		\
-	}					\
-	ret__;					\
-})
-
-#define read_pda(field)		pda_from_op("mov", field)
-#define write_pda(field, val)	pda_to_op("mov", field, val)
-#define add_pda(field, val)	pda_to_op("add", field, val)
-#define sub_pda(field, val)	pda_to_op("sub", field, val)
-#define or_pda(field, val)	pda_to_op("or", field, val)
-
-/* This is not atomic against other CPUs -- CPU preemption needs to be off */
-#define test_and_clear_bit_pda(bit, field)				\
-({									\
-	int old__;							\
-	asm volatile("btr %2,%%gs:%c3\n\tsbbl %0,%0"			\
-		     : "=r" (old__), "+m" (_proxy_pda.field)		\
-		     : "dIr" (bit), "i" (pda_offset(field)) : "memory");\
-	old__;								\
-})
-
-#endif
-
-#define PDA_STACKOFFSET (5*8)
-
-#endif /* ASM_X86__PDA_H */
diff --git a/include/asm-x86/percpu.h b/include/asm-x86/percpu.h
deleted file mode 100644
index e10a1d06..0000000
--- a/include/asm-x86/percpu.h
+++ /dev/null
@@ -1,218 +0,0 @@
-#ifndef ASM_X86__PERCPU_H
-#define ASM_X86__PERCPU_H
-
-#ifdef CONFIG_X86_64
-#include <linux/compiler.h>
-
-/* Same as asm-generic/percpu.h, except that we store the per cpu offset
-   in the PDA. Longer term the PDA and every per cpu variable
-   should be just put into a single section and referenced directly
-   from %gs */
-
-#ifdef CONFIG_SMP
-#include <asm/pda.h>
-
-#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
-#define __my_cpu_offset read_pda(data_offset)
-
-#define per_cpu_offset(x) (__per_cpu_offset(x))
-
-#endif
-#include <asm-generic/percpu.h>
-
-DECLARE_PER_CPU(struct x8664_pda, pda);
-
-/*
- * These are supposed to be implemented as a single instruction which
- * operates on the per-cpu data base segment.  x86-64 doesn't have
- * that yet, so this is a fairly inefficient workaround for the
- * meantime.  The single instruction is atomic with respect to
- * preemption and interrupts, so we need to explicitly disable
- * interrupts here to achieve the same effect.  However, because it
- * can be used from within interrupt-disable/enable, we can't actually
- * disable interrupts; disabling preemption is enough.
- */
-#define x86_read_percpu(var)						\
-	({								\
-		typeof(per_cpu_var(var)) __tmp;				\
-		preempt_disable();					\
-		__tmp = __get_cpu_var(var);				\
-		preempt_enable();					\
-		__tmp;							\
-	})
-
-#define x86_write_percpu(var, val)					\
-	do {								\
-		preempt_disable();					\
-		__get_cpu_var(var) = (val);				\
-		preempt_enable();					\
-	} while(0)
-
-#else /* CONFIG_X86_64 */
-
-#ifdef __ASSEMBLY__
-
-/*
- * PER_CPU finds an address of a per-cpu variable.
- *
- * Args:
- *    var - variable name
- *    reg - 32bit register
- *
- * The resulting address is stored in the "reg" argument.
- *
- * Example:
- *    PER_CPU(cpu_gdt_descr, %ebx)
- */
-#ifdef CONFIG_SMP
-#define PER_CPU(var, reg)				\
-	movl %fs:per_cpu__##this_cpu_off, reg;		\
-	lea per_cpu__##var(reg), reg
-#define PER_CPU_VAR(var)	%fs:per_cpu__##var
-#else /* ! SMP */
-#define PER_CPU(var, reg)			\
-	movl $per_cpu__##var, reg
-#define PER_CPU_VAR(var)	per_cpu__##var
-#endif	/* SMP */
-
-#else /* ...!ASSEMBLY */
-
-/*
- * PER_CPU finds an address of a per-cpu variable.
- *
- * Args:
- *    var - variable name
- *    cpu - 32bit register containing the current CPU number
- *
- * The resulting address is stored in the "cpu" argument.
- *
- * Example:
- *    PER_CPU(cpu_gdt_descr, %ebx)
- */
-#ifdef CONFIG_SMP
-
-#define __my_cpu_offset x86_read_percpu(this_cpu_off)
-
-/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
-#define __percpu_seg "%%fs:"
-
-#else  /* !SMP */
-
-#define __percpu_seg ""
-
-#endif	/* SMP */
-
-#include <asm-generic/percpu.h>
-
-/* We can use this directly for local CPU (faster). */
-DECLARE_PER_CPU(unsigned long, this_cpu_off);
-
-/* For arch-specific code, we can use direct single-insn ops (they
- * don't give an lvalue though). */
-extern void __bad_percpu_size(void);
-
-#define percpu_to_op(op, var, val)			\
-do {							\
-	typedef typeof(var) T__;			\
-	if (0) {					\
-		T__ tmp__;				\
-		tmp__ = (val);				\
-	}						\
-	switch (sizeof(var)) {				\
-	case 1:						\
-		asm(op "b %1,"__percpu_seg"%0"		\
-		    : "+m" (var)			\
-		    : "ri" ((T__)val));			\
-		break;					\
-	case 2:						\
-		asm(op "w %1,"__percpu_seg"%0"		\
-		    : "+m" (var)			\
-		    : "ri" ((T__)val));			\
-		break;					\
-	case 4:						\
-		asm(op "l %1,"__percpu_seg"%0"		\
-		    : "+m" (var)			\
-		    : "ri" ((T__)val));			\
-		break;					\
-	default: __bad_percpu_size();			\
-	}						\
-} while (0)
-
-#define percpu_from_op(op, var)				\
-({							\
-	typeof(var) ret__;				\
-	switch (sizeof(var)) {				\
-	case 1:						\
-		asm(op "b "__percpu_seg"%1,%0"		\
-		    : "=r" (ret__)			\
-		    : "m" (var));			\
-		break;					\
-	case 2:						\
-		asm(op "w "__percpu_seg"%1,%0"		\
-		    : "=r" (ret__)			\
-		    : "m" (var));			\
-		break;					\
-	case 4:						\
-		asm(op "l "__percpu_seg"%1,%0"		\
-		    : "=r" (ret__)			\
-		    : "m" (var));			\
-		break;					\
-	default: __bad_percpu_size();			\
-	}						\
-	ret__;						\
-})
-
-#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
-#define x86_write_percpu(var, val) percpu_to_op("mov", per_cpu__##var, val)
-#define x86_add_percpu(var, val) percpu_to_op("add", per_cpu__##var, val)
-#define x86_sub_percpu(var, val) percpu_to_op("sub", per_cpu__##var, val)
-#define x86_or_percpu(var, val) percpu_to_op("or", per_cpu__##var, val)
-#endif /* !__ASSEMBLY__ */
-#endif /* !CONFIG_X86_64 */
-
-#ifdef CONFIG_SMP
-
-/*
- * Define the "EARLY_PER_CPU" macros.  These are used for some per_cpu
- * variables that are initialized and accessed before there are per_cpu
- * areas allocated.
- */
-
-#define	DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)			\
-	DEFINE_PER_CPU(_type, _name) = _initvalue;			\
-	__typeof__(_type) _name##_early_map[NR_CPUS] __initdata =	\
-				{ [0 ... NR_CPUS-1] = _initvalue };	\
-	__typeof__(_type) *_name##_early_ptr __refdata = _name##_early_map
-
-#define EXPORT_EARLY_PER_CPU_SYMBOL(_name)			\
-	EXPORT_PER_CPU_SYMBOL(_name)
-
-#define DECLARE_EARLY_PER_CPU(_type, _name)			\
-	DECLARE_PER_CPU(_type, _name);				\
-	extern __typeof__(_type) *_name##_early_ptr;		\
-	extern __typeof__(_type)  _name##_early_map[]
-
-#define	early_per_cpu_ptr(_name) (_name##_early_ptr)
-#define	early_per_cpu_map(_name, _idx) (_name##_early_map[_idx])
-#define	early_per_cpu(_name, _cpu) 				\
-	(early_per_cpu_ptr(_name) ?				\
-		early_per_cpu_ptr(_name)[_cpu] :		\
-		per_cpu(_name, _cpu))
-
-#else	/* !CONFIG_SMP */
-#define	DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)		\
-	DEFINE_PER_CPU(_type, _name) = _initvalue
-
-#define EXPORT_EARLY_PER_CPU_SYMBOL(_name)			\
-	EXPORT_PER_CPU_SYMBOL(_name)
-
-#define DECLARE_EARLY_PER_CPU(_type, _name)			\
-	DECLARE_PER_CPU(_type, _name)
-
-#define	early_per_cpu(_name, _cpu) per_cpu(_name, _cpu)
-#define	early_per_cpu_ptr(_name) NULL
-/* no early_per_cpu_map() */
-
-#endif	/* !CONFIG_SMP */
-
-#endif /* ASM_X86__PERCPU_H */
diff --git a/include/asm-x86/pgalloc.h b/include/asm-x86/pgalloc.h
deleted file mode 100644
index 3cd23ad..0000000
--- a/include/asm-x86/pgalloc.h
+++ /dev/null
@@ -1,114 +0,0 @@
-#ifndef ASM_X86__PGALLOC_H
-#define ASM_X86__PGALLOC_H
-
-#include <linux/threads.h>
-#include <linux/mm.h>		/* for struct page */
-#include <linux/pagemap.h>
-
-static inline int  __paravirt_pgd_alloc(struct mm_struct *mm) { return 0; }
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define paravirt_pgd_alloc(mm)	__paravirt_pgd_alloc(mm)
-static inline void paravirt_pgd_free(struct mm_struct *mm, pgd_t *pgd) {}
-static inline void paravirt_alloc_pte(struct mm_struct *mm, unsigned long pfn)	{}
-static inline void paravirt_alloc_pmd(struct mm_struct *mm, unsigned long pfn)	{}
-static inline void paravirt_alloc_pmd_clone(unsigned long pfn, unsigned long clonepfn,
-					    unsigned long start, unsigned long count) {}
-static inline void paravirt_alloc_pud(struct mm_struct *mm, unsigned long pfn)	{}
-static inline void paravirt_release_pte(unsigned long pfn) {}
-static inline void paravirt_release_pmd(unsigned long pfn) {}
-static inline void paravirt_release_pud(unsigned long pfn) {}
-#endif
-
-/*
- * Allocate and free page tables.
- */
-extern pgd_t *pgd_alloc(struct mm_struct *);
-extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
-
-extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
-extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long);
-
-/* Should really implement gc for free page table pages. This could be
-   done with a reference count in struct page. */
-
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	BUG_ON((unsigned long)pte & (PAGE_SIZE-1));
-	free_page((unsigned long)pte);
-}
-
-static inline void pte_free(struct mm_struct *mm, struct page *pte)
-{
-	__free_page(pte);
-}
-
-extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
-
-static inline void pmd_populate_kernel(struct mm_struct *mm,
-				       pmd_t *pmd, pte_t *pte)
-{
-	paravirt_alloc_pte(mm, __pa(pte) >> PAGE_SHIFT);
-	set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE));
-}
-
-static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
-				struct page *pte)
-{
-	unsigned long pfn = page_to_pfn(pte);
-
-	paravirt_alloc_pte(mm, pfn);
-	set_pmd(pmd, __pmd(((pteval_t)pfn << PAGE_SHIFT) | _PAGE_TABLE));
-}
-
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-#if PAGETABLE_LEVELS > 2
-static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-	return (pmd_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
-}
-
-static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
-{
-	BUG_ON((unsigned long)pmd & (PAGE_SIZE-1));
-	free_page((unsigned long)pmd);
-}
-
-extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
-
-#ifdef CONFIG_X86_PAE
-extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
-#else	/* !CONFIG_X86_PAE */
-static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
-{
-	paravirt_alloc_pmd(mm, __pa(pmd) >> PAGE_SHIFT);
-	set_pud(pud, __pud(_PAGE_TABLE | __pa(pmd)));
-}
-#endif	/* CONFIG_X86_PAE */
-
-#if PAGETABLE_LEVELS > 3
-static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
-{
-	paravirt_alloc_pud(mm, __pa(pud) >> PAGE_SHIFT);
-	set_pgd(pgd, __pgd(_PAGE_TABLE | __pa(pud)));
-}
-
-static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-	return (pud_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
-}
-
-static inline void pud_free(struct mm_struct *mm, pud_t *pud)
-{
-	BUG_ON((unsigned long)pud & (PAGE_SIZE-1));
-	free_page((unsigned long)pud);
-}
-
-extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
-#endif	/* PAGETABLE_LEVELS > 3 */
-#endif	/* PAGETABLE_LEVELS > 2 */
-
-#endif /* ASM_X86__PGALLOC_H */
diff --git a/include/asm-x86/pgtable-2level-defs.h b/include/asm-x86/pgtable-2level-defs.h
deleted file mode 100644
index 7ec48f4..0000000
--- a/include/asm-x86/pgtable-2level-defs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef ASM_X86__PGTABLE_2LEVEL_DEFS_H
-#define ASM_X86__PGTABLE_2LEVEL_DEFS_H
-
-#define SHARED_KERNEL_PMD	0
-
-/*
- * traditional i386 two-level paging structure:
- */
-
-#define PGDIR_SHIFT	22
-#define PTRS_PER_PGD	1024
-
-/*
- * the i386 is two-level, so we don't really have any
- * PMD directory physically.
- */
-
-#define PTRS_PER_PTE	1024
-
-#endif /* ASM_X86__PGTABLE_2LEVEL_DEFS_H */
diff --git a/include/asm-x86/pgtable-2level.h b/include/asm-x86/pgtable-2level.h
deleted file mode 100644
index 8176208..0000000
--- a/include/asm-x86/pgtable-2level.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef ASM_X86__PGTABLE_2LEVEL_H
-#define ASM_X86__PGTABLE_2LEVEL_H
-
-#define pte_ERROR(e) \
-	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte_low)
-#define pgd_ERROR(e) \
-	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-/*
- * Certain architectures need to do special things when PTEs
- * within a page table are directly modified.  Thus, the following
- * hook is made available.
- */
-static inline void native_set_pte(pte_t *ptep , pte_t pte)
-{
-	*ptep = pte;
-}
-
-static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
-{
-	*pmdp = pmd;
-}
-
-static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
-{
-	native_set_pte(ptep, pte);
-}
-
-static inline void native_set_pte_present(struct mm_struct *mm,
-					  unsigned long addr,
-					  pte_t *ptep, pte_t pte)
-{
-	native_set_pte(ptep, pte);
-}
-
-static inline void native_pmd_clear(pmd_t *pmdp)
-{
-	native_set_pmd(pmdp, __pmd(0));
-}
-
-static inline void native_pte_clear(struct mm_struct *mm,
-				    unsigned long addr, pte_t *xp)
-{
-	*xp = native_make_pte(0);
-}
-
-#ifdef CONFIG_SMP
-static inline pte_t native_ptep_get_and_clear(pte_t *xp)
-{
-	return __pte(xchg(&xp->pte_low, 0));
-}
-#else
-#define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
-#endif
-
-#define pte_none(x)		(!(x).pte_low)
-
-/*
- * Bits 0, 6 and 7 are taken, split up the 29 bits of offset
- * into this range:
- */
-#define PTE_FILE_MAX_BITS	29
-
-#define pte_to_pgoff(pte)						\
-	((((pte).pte_low >> 1) & 0x1f) + (((pte).pte_low >> 8) << 5))
-
-#define pgoff_to_pte(off)						\
-	((pte_t) { .pte_low = (((off) & 0x1f) << 1) +			\
-			(((off) >> 5) << 8) + _PAGE_FILE })
-
-/* Encode and de-code a swap entry */
-#define __swp_type(x)			(((x).val >> 1) & 0x1f)
-#define __swp_offset(x)			((x).val >> 8)
-#define __swp_entry(type, offset)				\
-	((swp_entry_t) { ((type) << 1) | ((offset) << 8) })
-#define __pte_to_swp_entry(pte)		((swp_entry_t) { (pte).pte_low })
-#define __swp_entry_to_pte(x)		((pte_t) { .pte = (x).val })
-
-#endif /* ASM_X86__PGTABLE_2LEVEL_H */
diff --git a/include/asm-x86/pgtable-3level-defs.h b/include/asm-x86/pgtable-3level-defs.h
deleted file mode 100644
index c05fe6f..0000000
--- a/include/asm-x86/pgtable-3level-defs.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef ASM_X86__PGTABLE_3LEVEL_DEFS_H
-#define ASM_X86__PGTABLE_3LEVEL_DEFS_H
-
-#ifdef CONFIG_PARAVIRT
-#define SHARED_KERNEL_PMD	(pv_info.shared_kernel_pmd)
-#else
-#define SHARED_KERNEL_PMD	1
-#endif
-
-/*
- * PGDIR_SHIFT determines what a top-level page table entry can map
- */
-#define PGDIR_SHIFT	30
-#define PTRS_PER_PGD	4
-
-/*
- * PMD_SHIFT determines the size of the area a middle-level
- * page table can map
- */
-#define PMD_SHIFT	21
-#define PTRS_PER_PMD	512
-
-/*
- * entries per page directory level
- */
-#define PTRS_PER_PTE	512
-
-#endif /* ASM_X86__PGTABLE_3LEVEL_DEFS_H */
diff --git a/include/asm-x86/pgtable-3level.h b/include/asm-x86/pgtable-3level.h
deleted file mode 100644
index 75f4276..0000000
--- a/include/asm-x86/pgtable-3level.h
+++ /dev/null
@@ -1,175 +0,0 @@
-#ifndef ASM_X86__PGTABLE_3LEVEL_H
-#define ASM_X86__PGTABLE_3LEVEL_H
-
-/*
- * Intel Physical Address Extension (PAE) Mode - three-level page
- * tables on PPro+ CPUs.
- *
- * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
- */
-
-#define pte_ERROR(e)							\
-	printk("%s:%d: bad pte %p(%08lx%08lx).\n",			\
-	       __FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low)
-#define pmd_ERROR(e)							\
-	printk("%s:%d: bad pmd %p(%016Lx).\n",				\
-	       __FILE__, __LINE__, &(e), pmd_val(e))
-#define pgd_ERROR(e)							\
-	printk("%s:%d: bad pgd %p(%016Lx).\n",				\
-	       __FILE__, __LINE__, &(e), pgd_val(e))
-
-static inline int pud_none(pud_t pud)
-{
-	return pud_val(pud) == 0;
-}
-
-static inline int pud_bad(pud_t pud)
-{
-	return (pud_val(pud) & ~(PTE_PFN_MASK | _KERNPG_TABLE | _PAGE_USER)) != 0;
-}
-
-static inline int pud_present(pud_t pud)
-{
-	return pud_val(pud) & _PAGE_PRESENT;
-}
-
-/* Rules for using set_pte: the pte being assigned *must* be
- * either not present or in a state where the hardware will
- * not attempt to update the pte.  In places where this is
- * not possible, use pte_get_and_clear to obtain the old pte
- * value and then use set_pte to update it.  -ben
- */
-static inline void native_set_pte(pte_t *ptep, pte_t pte)
-{
-	ptep->pte_high = pte.pte_high;
-	smp_wmb();
-	ptep->pte_low = pte.pte_low;
-}
-
-/*
- * Since this is only called on user PTEs, and the page fault handler
- * must handle the already racy situation of simultaneous page faults,
- * we are justified in merely clearing the PTE present bit, followed
- * by a set.  The ordering here is important.
- */
-static inline void native_set_pte_present(struct mm_struct *mm,
-					  unsigned long addr,
-					  pte_t *ptep, pte_t pte)
-{
-	ptep->pte_low = 0;
-	smp_wmb();
-	ptep->pte_high = pte.pte_high;
-	smp_wmb();
-	ptep->pte_low = pte.pte_low;
-}
-
-static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
-{
-	set_64bit((unsigned long long *)(ptep), native_pte_val(pte));
-}
-
-static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
-{
-	set_64bit((unsigned long long *)(pmdp), native_pmd_val(pmd));
-}
-
-static inline void native_set_pud(pud_t *pudp, pud_t pud)
-{
-	set_64bit((unsigned long long *)(pudp), native_pud_val(pud));
-}
-
-/*
- * For PTEs and PDEs, we must clear the P-bit first when clearing a page table
- * entry, so clear the bottom half first and enforce ordering with a compiler
- * barrier.
- */
-static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr,
-				    pte_t *ptep)
-{
-	ptep->pte_low = 0;
-	smp_wmb();
-	ptep->pte_high = 0;
-}
-
-static inline void native_pmd_clear(pmd_t *pmd)
-{
-	u32 *tmp = (u32 *)pmd;
-	*tmp = 0;
-	smp_wmb();
-	*(tmp + 1) = 0;
-}
-
-static inline void pud_clear(pud_t *pudp)
-{
-	unsigned long pgd;
-
-	set_pud(pudp, __pud(0));
-
-	/*
-	 * According to Intel App note "TLBs, Paging-Structure Caches,
-	 * and Their Invalidation", April 2007, document 317080-001,
-	 * section 8.1: in PAE mode we explicitly have to flush the
-	 * TLB via cr3 if the top-level pgd is changed...
-	 *
-	 * Make sure the pud entry we're updating is within the
-	 * current pgd to avoid unnecessary TLB flushes.
-	 */
-	pgd = read_cr3();
-	if (__pa(pudp) >= pgd && __pa(pudp) <
-	    (pgd + sizeof(pgd_t)*PTRS_PER_PGD))
-		write_cr3(pgd);
-}
-
-#define pud_page(pud) ((struct page *) __va(pud_val(pud) & PTE_PFN_MASK))
-
-#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PTE_PFN_MASK))
-
-
-/* Find an entry in the second-level page table.. */
-#define pmd_offset(pud, address) ((pmd_t *)pud_page(*(pud)) +	\
-				  pmd_index(address))
-
-#ifdef CONFIG_SMP
-static inline pte_t native_ptep_get_and_clear(pte_t *ptep)
-{
-	pte_t res;
-
-	/* xchg acts as a barrier before the setting of the high bits */
-	res.pte_low = xchg(&ptep->pte_low, 0);
-	res.pte_high = ptep->pte_high;
-	ptep->pte_high = 0;
-
-	return res;
-}
-#else
-#define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
-#endif
-
-#define __HAVE_ARCH_PTE_SAME
-static inline int pte_same(pte_t a, pte_t b)
-{
-	return a.pte_low == b.pte_low && a.pte_high == b.pte_high;
-}
-
-static inline int pte_none(pte_t pte)
-{
-	return !pte.pte_low && !pte.pte_high;
-}
-
-/*
- * Bits 0, 6 and 7 are taken in the low part of the pte,
- * put the 32 bits of offset into the high part.
- */
-#define pte_to_pgoff(pte) ((pte).pte_high)
-#define pgoff_to_pte(off)						\
-	((pte_t) { { .pte_low = _PAGE_FILE, .pte_high = (off) } })
-#define PTE_FILE_MAX_BITS       32
-
-/* Encode and de-code a swap entry */
-#define __swp_type(x)			(((x).val) & 0x1f)
-#define __swp_offset(x)			((x).val >> 5)
-#define __swp_entry(type, offset)	((swp_entry_t){(type) | (offset) << 5})
-#define __pte_to_swp_entry(pte)		((swp_entry_t){ (pte).pte_high })
-#define __swp_entry_to_pte(x)		((pte_t){ { .pte_high = (x).val } })
-
-#endif /* ASM_X86__PGTABLE_3LEVEL_H */
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
deleted file mode 100644
index 88a53b1..0000000
--- a/include/asm-x86/pgtable.h
+++ /dev/null
@@ -1,561 +0,0 @@
-#ifndef ASM_X86__PGTABLE_H
-#define ASM_X86__PGTABLE_H
-
-#define FIRST_USER_ADDRESS	0
-
-#define _PAGE_BIT_PRESENT	0	/* is present */
-#define _PAGE_BIT_RW		1	/* writeable */
-#define _PAGE_BIT_USER		2	/* userspace addressable */
-#define _PAGE_BIT_PWT		3	/* page write through */
-#define _PAGE_BIT_PCD		4	/* page cache disabled */
-#define _PAGE_BIT_ACCESSED	5	/* was accessed (raised by CPU) */
-#define _PAGE_BIT_DIRTY		6	/* was written to (raised by CPU) */
-#define _PAGE_BIT_FILE		6
-#define _PAGE_BIT_PSE		7	/* 4 MB (or 2MB) page */
-#define _PAGE_BIT_PAT		7	/* on 4KB pages */
-#define _PAGE_BIT_GLOBAL	8	/* Global TLB entry PPro+ */
-#define _PAGE_BIT_UNUSED1	9	/* available for programmer */
-#define _PAGE_BIT_IOMAP		10	/* flag used to indicate IO mapping */
-#define _PAGE_BIT_UNUSED3	11
-#define _PAGE_BIT_PAT_LARGE	12	/* On 2MB or 1GB pages */
-#define _PAGE_BIT_SPECIAL	_PAGE_BIT_UNUSED1
-#define _PAGE_BIT_CPA_TEST	_PAGE_BIT_UNUSED1
-#define _PAGE_BIT_NX           63       /* No execute: only valid after cpuid check */
-
-#define _PAGE_PRESENT	(_AT(pteval_t, 1) << _PAGE_BIT_PRESENT)
-#define _PAGE_RW	(_AT(pteval_t, 1) << _PAGE_BIT_RW)
-#define _PAGE_USER	(_AT(pteval_t, 1) << _PAGE_BIT_USER)
-#define _PAGE_PWT	(_AT(pteval_t, 1) << _PAGE_BIT_PWT)
-#define _PAGE_PCD	(_AT(pteval_t, 1) << _PAGE_BIT_PCD)
-#define _PAGE_ACCESSED	(_AT(pteval_t, 1) << _PAGE_BIT_ACCESSED)
-#define _PAGE_DIRTY	(_AT(pteval_t, 1) << _PAGE_BIT_DIRTY)
-#define _PAGE_PSE	(_AT(pteval_t, 1) << _PAGE_BIT_PSE)
-#define _PAGE_GLOBAL	(_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL)
-#define _PAGE_UNUSED1	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1)
-#define _PAGE_IOMAP	(_AT(pteval_t, 1) << _PAGE_BIT_IOMAP)
-#define _PAGE_UNUSED3	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED3)
-#define _PAGE_PAT	(_AT(pteval_t, 1) << _PAGE_BIT_PAT)
-#define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
-#define _PAGE_SPECIAL	(_AT(pteval_t, 1) << _PAGE_BIT_SPECIAL)
-#define _PAGE_CPA_TEST	(_AT(pteval_t, 1) << _PAGE_BIT_CPA_TEST)
-#define __HAVE_ARCH_PTE_SPECIAL
-
-#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
-#define _PAGE_NX	(_AT(pteval_t, 1) << _PAGE_BIT_NX)
-#else
-#define _PAGE_NX	(_AT(pteval_t, 0))
-#endif
-
-/* If _PAGE_PRESENT is clear, we use these: */
-#define _PAGE_FILE	_PAGE_DIRTY	/* nonlinear file mapping,
-					 * saved PTE; unset:swap */
-#define _PAGE_PROTNONE	_PAGE_PSE	/* if the user mapped it with PROT_NONE;
-					   pte_present gives true */
-
-#define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER |	\
-			 _PAGE_ACCESSED | _PAGE_DIRTY)
-#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED |	\
-			 _PAGE_DIRTY)
-
-/* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK	(PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT |		\
-			 _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY)
-
-#define _PAGE_CACHE_MASK	(_PAGE_PCD | _PAGE_PWT)
-#define _PAGE_CACHE_WB		(0)
-#define _PAGE_CACHE_WC		(_PAGE_PWT)
-#define _PAGE_CACHE_UC_MINUS	(_PAGE_PCD)
-#define _PAGE_CACHE_UC		(_PAGE_PCD | _PAGE_PWT)
-
-#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
-#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
-				 _PAGE_ACCESSED | _PAGE_NX)
-
-#define PAGE_SHARED_EXEC	__pgprot(_PAGE_PRESENT | _PAGE_RW |	\
-					 _PAGE_USER | _PAGE_ACCESSED)
-#define PAGE_COPY_NOEXEC	__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
-					 _PAGE_ACCESSED | _PAGE_NX)
-#define PAGE_COPY_EXEC		__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
-					 _PAGE_ACCESSED)
-#define PAGE_COPY		PAGE_COPY_NOEXEC
-#define PAGE_READONLY		__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
-					 _PAGE_ACCESSED | _PAGE_NX)
-#define PAGE_READONLY_EXEC	__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
-					 _PAGE_ACCESSED)
-
-#define __PAGE_KERNEL_EXEC						\
-	(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL)
-#define __PAGE_KERNEL		(__PAGE_KERNEL_EXEC | _PAGE_NX)
-
-#define __PAGE_KERNEL_RO		(__PAGE_KERNEL & ~_PAGE_RW)
-#define __PAGE_KERNEL_RX		(__PAGE_KERNEL_EXEC & ~_PAGE_RW)
-#define __PAGE_KERNEL_EXEC_NOCACHE	(__PAGE_KERNEL_EXEC | _PAGE_PCD | _PAGE_PWT)
-#define __PAGE_KERNEL_WC		(__PAGE_KERNEL | _PAGE_CACHE_WC)
-#define __PAGE_KERNEL_NOCACHE		(__PAGE_KERNEL | _PAGE_PCD | _PAGE_PWT)
-#define __PAGE_KERNEL_UC_MINUS		(__PAGE_KERNEL | _PAGE_PCD)
-#define __PAGE_KERNEL_VSYSCALL		(__PAGE_KERNEL_RX | _PAGE_USER)
-#define __PAGE_KERNEL_VSYSCALL_NOCACHE	(__PAGE_KERNEL_VSYSCALL | _PAGE_PCD | _PAGE_PWT)
-#define __PAGE_KERNEL_LARGE		(__PAGE_KERNEL | _PAGE_PSE)
-#define __PAGE_KERNEL_LARGE_NOCACHE	(__PAGE_KERNEL | _PAGE_CACHE_UC | _PAGE_PSE)
-#define __PAGE_KERNEL_LARGE_EXEC	(__PAGE_KERNEL_EXEC | _PAGE_PSE)
-
-#define __PAGE_KERNEL_IO		(__PAGE_KERNEL | _PAGE_IOMAP)
-#define __PAGE_KERNEL_IO_NOCACHE	(__PAGE_KERNEL_NOCACHE | _PAGE_IOMAP)
-#define __PAGE_KERNEL_IO_UC_MINUS	(__PAGE_KERNEL_UC_MINUS | _PAGE_IOMAP)
-#define __PAGE_KERNEL_IO_WC		(__PAGE_KERNEL_WC | _PAGE_IOMAP)
-
-#define PAGE_KERNEL			__pgprot(__PAGE_KERNEL)
-#define PAGE_KERNEL_RO			__pgprot(__PAGE_KERNEL_RO)
-#define PAGE_KERNEL_EXEC		__pgprot(__PAGE_KERNEL_EXEC)
-#define PAGE_KERNEL_RX			__pgprot(__PAGE_KERNEL_RX)
-#define PAGE_KERNEL_WC			__pgprot(__PAGE_KERNEL_WC)
-#define PAGE_KERNEL_NOCACHE		__pgprot(__PAGE_KERNEL_NOCACHE)
-#define PAGE_KERNEL_UC_MINUS		__pgprot(__PAGE_KERNEL_UC_MINUS)
-#define PAGE_KERNEL_EXEC_NOCACHE	__pgprot(__PAGE_KERNEL_EXEC_NOCACHE)
-#define PAGE_KERNEL_LARGE		__pgprot(__PAGE_KERNEL_LARGE)
-#define PAGE_KERNEL_LARGE_NOCACHE	__pgprot(__PAGE_KERNEL_LARGE_NOCACHE)
-#define PAGE_KERNEL_LARGE_EXEC		__pgprot(__PAGE_KERNEL_LARGE_EXEC)
-#define PAGE_KERNEL_VSYSCALL		__pgprot(__PAGE_KERNEL_VSYSCALL)
-#define PAGE_KERNEL_VSYSCALL_NOCACHE	__pgprot(__PAGE_KERNEL_VSYSCALL_NOCACHE)
-
-#define PAGE_KERNEL_IO			__pgprot(__PAGE_KERNEL_IO)
-#define PAGE_KERNEL_IO_NOCACHE		__pgprot(__PAGE_KERNEL_IO_NOCACHE)
-#define PAGE_KERNEL_IO_UC_MINUS		__pgprot(__PAGE_KERNEL_IO_UC_MINUS)
-#define PAGE_KERNEL_IO_WC		__pgprot(__PAGE_KERNEL_IO_WC)
-
-/*         xwr */
-#define __P000	PAGE_NONE
-#define __P001	PAGE_READONLY
-#define __P010	PAGE_COPY
-#define __P011	PAGE_COPY
-#define __P100	PAGE_READONLY_EXEC
-#define __P101	PAGE_READONLY_EXEC
-#define __P110	PAGE_COPY_EXEC
-#define __P111	PAGE_COPY_EXEC
-
-#define __S000	PAGE_NONE
-#define __S001	PAGE_READONLY
-#define __S010	PAGE_SHARED
-#define __S011	PAGE_SHARED
-#define __S100	PAGE_READONLY_EXEC
-#define __S101	PAGE_READONLY_EXEC
-#define __S110	PAGE_SHARED_EXEC
-#define __S111	PAGE_SHARED_EXEC
-
-/*
- * early identity mapping  pte attrib macros.
- */
-#ifdef CONFIG_X86_64
-#define __PAGE_KERNEL_IDENT_LARGE_EXEC	__PAGE_KERNEL_LARGE_EXEC
-#else
-/*
- * For PDE_IDENT_ATTR include USER bit. As the PDE and PTE protection
- * bits are combined, this will alow user to access the high address mapped
- * VDSO in the presence of CONFIG_COMPAT_VDSO
- */
-#define PTE_IDENT_ATTR	 0x003		/* PRESENT+RW */
-#define PDE_IDENT_ATTR	 0x067		/* PRESENT+RW+USER+DIRTY+ACCESSED */
-#define PGD_IDENT_ATTR	 0x001		/* PRESENT (no other attributes) */
-#endif
-
-#ifndef __ASSEMBLY__
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
-#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
-
-extern spinlock_t pgd_lock;
-extern struct list_head pgd_list;
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_dirty(pte_t pte)
-{
-	return pte_flags(pte) & _PAGE_DIRTY;
-}
-
-static inline int pte_young(pte_t pte)
-{
-	return pte_flags(pte) & _PAGE_ACCESSED;
-}
-
-static inline int pte_write(pte_t pte)
-{
-	return pte_flags(pte) & _PAGE_RW;
-}
-
-static inline int pte_file(pte_t pte)
-{
-	return pte_flags(pte) & _PAGE_FILE;
-}
-
-static inline int pte_huge(pte_t pte)
-{
-	return pte_flags(pte) & _PAGE_PSE;
-}
-
-static inline int pte_global(pte_t pte)
-{
-	return pte_flags(pte) & _PAGE_GLOBAL;
-}
-
-static inline int pte_exec(pte_t pte)
-{
-	return !(pte_flags(pte) & _PAGE_NX);
-}
-
-static inline int pte_special(pte_t pte)
-{
-	return pte_flags(pte) & _PAGE_SPECIAL;
-}
-
-static inline unsigned long pte_pfn(pte_t pte)
-{
-	return (pte_val(pte) & PTE_PFN_MASK) >> PAGE_SHIFT;
-}
-
-#define pte_page(pte)	pfn_to_page(pte_pfn(pte))
-
-static inline int pmd_large(pmd_t pte)
-{
-	return (pmd_val(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
-		(_PAGE_PSE | _PAGE_PRESENT);
-}
-
-static inline pte_t pte_mkclean(pte_t pte)
-{
-	return __pte(pte_val(pte) & ~_PAGE_DIRTY);
-}
-
-static inline pte_t pte_mkold(pte_t pte)
-{
-	return __pte(pte_val(pte) & ~_PAGE_ACCESSED);
-}
-
-static inline pte_t pte_wrprotect(pte_t pte)
-{
-	return __pte(pte_val(pte) & ~_PAGE_RW);
-}
-
-static inline pte_t pte_mkexec(pte_t pte)
-{
-	return __pte(pte_val(pte) & ~_PAGE_NX);
-}
-
-static inline pte_t pte_mkdirty(pte_t pte)
-{
-	return __pte(pte_val(pte) | _PAGE_DIRTY);
-}
-
-static inline pte_t pte_mkyoung(pte_t pte)
-{
-	return __pte(pte_val(pte) | _PAGE_ACCESSED);
-}
-
-static inline pte_t pte_mkwrite(pte_t pte)
-{
-	return __pte(pte_val(pte) | _PAGE_RW);
-}
-
-static inline pte_t pte_mkhuge(pte_t pte)
-{
-	return __pte(pte_val(pte) | _PAGE_PSE);
-}
-
-static inline pte_t pte_clrhuge(pte_t pte)
-{
-	return __pte(pte_val(pte) & ~_PAGE_PSE);
-}
-
-static inline pte_t pte_mkglobal(pte_t pte)
-{
-	return __pte(pte_val(pte) | _PAGE_GLOBAL);
-}
-
-static inline pte_t pte_clrglobal(pte_t pte)
-{
-	return __pte(pte_val(pte) & ~_PAGE_GLOBAL);
-}
-
-static inline pte_t pte_mkspecial(pte_t pte)
-{
-	return __pte(pte_val(pte) | _PAGE_SPECIAL);
-}
-
-extern pteval_t __supported_pte_mask;
-
-static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot)
-{
-	return __pte((((phys_addr_t)page_nr << PAGE_SHIFT) |
-		      pgprot_val(pgprot)) & __supported_pte_mask);
-}
-
-static inline pmd_t pfn_pmd(unsigned long page_nr, pgprot_t pgprot)
-{
-	return __pmd((((phys_addr_t)page_nr << PAGE_SHIFT) |
-		      pgprot_val(pgprot)) & __supported_pte_mask);
-}
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	pteval_t val = pte_val(pte);
-
-	/*
-	 * Chop off the NX bit (if present), and add the NX portion of
-	 * the newprot (if present):
-	 */
-	val &= _PAGE_CHG_MASK;
-	val |= pgprot_val(newprot) & (~_PAGE_CHG_MASK) & __supported_pte_mask;
-
-	return __pte(val);
-}
-
-/* mprotect needs to preserve PAT bits when updating vm_page_prot */
-#define pgprot_modify pgprot_modify
-static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
-{
-	pgprotval_t preservebits = pgprot_val(oldprot) & _PAGE_CHG_MASK;
-	pgprotval_t addbits = pgprot_val(newprot);
-	return __pgprot(preservebits | addbits);
-}
-
-#define pte_pgprot(x) __pgprot(pte_flags(x) & PTE_FLAGS_MASK)
-
-#define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
-
-#ifndef __ASSEMBLY__
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-struct file;
-pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-                              unsigned long size, pgprot_t vma_prot);
-int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
-                              unsigned long size, pgprot_t *vma_prot);
-#endif
-
-/* Install a pte for a particular vaddr in kernel space. */
-void set_pte_vaddr(unsigned long vaddr, pte_t pte);
-
-#ifdef CONFIG_X86_32
-extern void native_pagetable_setup_start(pgd_t *base);
-extern void native_pagetable_setup_done(pgd_t *base);
-#else
-static inline void native_pagetable_setup_start(pgd_t *base) {}
-static inline void native_pagetable_setup_done(pgd_t *base) {}
-#endif
-
-extern int arch_report_meminfo(char *page);
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else  /* !CONFIG_PARAVIRT */
-#define set_pte(ptep, pte)		native_set_pte(ptep, pte)
-#define set_pte_at(mm, addr, ptep, pte)	native_set_pte_at(mm, addr, ptep, pte)
-
-#define set_pte_present(mm, addr, ptep, pte)				\
-	native_set_pte_present(mm, addr, ptep, pte)
-#define set_pte_atomic(ptep, pte)					\
-	native_set_pte_atomic(ptep, pte)
-
-#define set_pmd(pmdp, pmd)		native_set_pmd(pmdp, pmd)
-
-#ifndef __PAGETABLE_PUD_FOLDED
-#define set_pgd(pgdp, pgd)		native_set_pgd(pgdp, pgd)
-#define pgd_clear(pgd)			native_pgd_clear(pgd)
-#endif
-
-#ifndef set_pud
-# define set_pud(pudp, pud)		native_set_pud(pudp, pud)
-#endif
-
-#ifndef __PAGETABLE_PMD_FOLDED
-#define pud_clear(pud)			native_pud_clear(pud)
-#endif
-
-#define pte_clear(mm, addr, ptep)	native_pte_clear(mm, addr, ptep)
-#define pmd_clear(pmd)			native_pmd_clear(pmd)
-
-#define pte_update(mm, addr, ptep)              do { } while (0)
-#define pte_update_defer(mm, addr, ptep)        do { } while (0)
-
-static inline void __init paravirt_pagetable_setup_start(pgd_t *base)
-{
-	native_pagetable_setup_start(base);
-}
-
-static inline void __init paravirt_pagetable_setup_done(pgd_t *base)
-{
-	native_pagetable_setup_done(base);
-}
-#endif	/* CONFIG_PARAVIRT */
-
-#endif	/* __ASSEMBLY__ */
-
-#ifdef CONFIG_X86_32
-# include "pgtable_32.h"
-#else
-# include "pgtable_64.h"
-#endif
-
-/*
- * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
- *
- * this macro returns the index of the entry in the pgd page which would
- * control the given virtual address
- */
-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
-
-/*
- * pgd_offset() returns a (pgd_t *)
- * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
- */
-#define pgd_offset(mm, address) ((mm)->pgd + pgd_index((address)))
-/*
- * a shortcut which implies the use of the kernel's pgd, instead
- * of a process's
- */
-#define pgd_offset_k(address) pgd_offset(&init_mm, (address))
-
-
-#define KERNEL_PGD_BOUNDARY	pgd_index(PAGE_OFFSET)
-#define KERNEL_PGD_PTRS		(PTRS_PER_PGD - KERNEL_PGD_BOUNDARY)
-
-#ifndef __ASSEMBLY__
-
-enum {
-	PG_LEVEL_NONE,
-	PG_LEVEL_4K,
-	PG_LEVEL_2M,
-	PG_LEVEL_1G,
-	PG_LEVEL_NUM
-};
-
-#ifdef CONFIG_PROC_FS
-extern void update_page_count(int level, unsigned long pages);
-#else
-static inline void update_page_count(int level, unsigned long pages) { }
-#endif
-
-/*
- * Helper function that returns the kernel pagetable entry controlling
- * the virtual address 'address'. NULL means no pagetable entry present.
- * NOTE: the return type is pte_t but if the pmd is PSE then we return it
- * as a pte too.
- */
-extern pte_t *lookup_address(unsigned long address, unsigned int *level);
-
-/* local pte updates need not use xchg for locking */
-static inline pte_t native_local_ptep_get_and_clear(pte_t *ptep)
-{
-	pte_t res = *ptep;
-
-	/* Pure native function needs no input for mm, addr */
-	native_pte_clear(NULL, 0, ptep);
-	return res;
-}
-
-static inline void native_set_pte_at(struct mm_struct *mm, unsigned long addr,
-				     pte_t *ptep , pte_t pte)
-{
-	native_set_pte(ptep, pte);
-}
-
-#ifndef CONFIG_PARAVIRT
-/*
- * Rules for using pte_update - it must be called after any PTE update which
- * has not been done using the set_pte / clear_pte interfaces.  It is used by
- * shadow mode hypervisors to resynchronize the shadow page tables.  Kernel PTE
- * updates should either be sets, clears, or set_pte_atomic for P->P
- * transitions, which means this hook should only be called for user PTEs.
- * This hook implies a P->P protection or access change has taken place, which
- * requires a subsequent TLB flush.  The notification can optionally be delayed
- * until the TLB flush event by using the pte_update_defer form of the
- * interface, but care must be taken to assure that the flush happens while
- * still holding the same page table lock so that the shadow and primary pages
- * do not become out of sync on SMP.
- */
-#define pte_update(mm, addr, ptep)		do { } while (0)
-#define pte_update_defer(mm, addr, ptep)	do { } while (0)
-#endif
-
-/*
- * We only update the dirty/accessed state if we set
- * the dirty bit by hand in the kernel, since the hardware
- * will do the accessed bit for us, and we don't want to
- * race with other CPU's that might be updating the dirty
- * bit at the same time.
- */
-struct vm_area_struct;
-
-#define  __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-extern int ptep_set_access_flags(struct vm_area_struct *vma,
-				 unsigned long address, pte_t *ptep,
-				 pte_t entry, int dirty);
-
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-extern int ptep_test_and_clear_young(struct vm_area_struct *vma,
-				     unsigned long addr, pte_t *ptep);
-
-#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
-extern int ptep_clear_flush_young(struct vm_area_struct *vma,
-				  unsigned long address, pte_t *ptep);
-
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
-				       pte_t *ptep)
-{
-	pte_t pte = native_ptep_get_and_clear(ptep);
-	pte_update(mm, addr, ptep);
-	return pte;
-}
-
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
-static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
-					    unsigned long addr, pte_t *ptep,
-					    int full)
-{
-	pte_t pte;
-	if (full) {
-		/*
-		 * Full address destruction in progress; paravirt does not
-		 * care about updates and native needs no locking
-		 */
-		pte = native_local_ptep_get_and_clear(ptep);
-	} else {
-		pte = ptep_get_and_clear(mm, addr, ptep);
-	}
-	return pte;
-}
-
-#define __HAVE_ARCH_PTEP_SET_WRPROTECT
-static inline void ptep_set_wrprotect(struct mm_struct *mm,
-				      unsigned long addr, pte_t *ptep)
-{
-	clear_bit(_PAGE_BIT_RW, (unsigned long *)&ptep->pte);
-	pte_update(mm, addr, ptep);
-}
-
-/*
- * clone_pgd_range(pgd_t *dst, pgd_t *src, int count);
- *
- *  dst - pointer to pgd range anwhere on a pgd page
- *  src - ""
- *  count - the number of pgds to copy.
- *
- * dst and src can be on the same page, but the range must not overlap,
- * and must not cross a page boundary.
- */
-static inline void clone_pgd_range(pgd_t *dst, pgd_t *src, int count)
-{
-       memcpy(dst, src, count * sizeof(pgd_t));
-}
-
-
-#include <asm-generic/pgtable.h>
-#endif	/* __ASSEMBLY__ */
-
-#endif /* ASM_X86__PGTABLE_H */
diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h
deleted file mode 100644
index 8de702d..0000000
--- a/include/asm-x86/pgtable_32.h
+++ /dev/null
@@ -1,191 +0,0 @@
-#ifndef ASM_X86__PGTABLE_32_H
-#define ASM_X86__PGTABLE_32_H
-
-
-/*
- * The Linux memory management assumes a three-level page table setup. On
- * the i386, we use that, but "fold" the mid level into the top-level page
- * table, so that we physically have the same two-level page table as the
- * i386 mmu expects.
- *
- * This file contains the functions and defines necessary to modify and use
- * the i386 page table tree.
- */
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-#include <asm/fixmap.h>
-#include <linux/threads.h>
-#include <asm/paravirt.h>
-
-#include <linux/bitops.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-
-struct mm_struct;
-struct vm_area_struct;
-
-extern pgd_t swapper_pg_dir[1024];
-
-static inline void pgtable_cache_init(void) { }
-static inline void check_pgt_cache(void) { }
-void paging_init(void);
-
-extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t);
-
-/*
- * The Linux x86 paging architecture is 'compile-time dual-mode', it
- * implements both the traditional 2-level x86 page tables and the
- * newer 3-level PAE-mode page tables.
- */
-#ifdef CONFIG_X86_PAE
-# include <asm/pgtable-3level-defs.h>
-# define PMD_SIZE	(1UL << PMD_SHIFT)
-# define PMD_MASK	(~(PMD_SIZE - 1))
-#else
-# include <asm/pgtable-2level-defs.h>
-#endif
-
-#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK	(~(PGDIR_SIZE - 1))
-
-/* Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_OFFSET	(8 * 1024 * 1024)
-#define VMALLOC_START	((unsigned long)high_memory + VMALLOC_OFFSET)
-#ifdef CONFIG_X86_PAE
-#define LAST_PKMAP 512
-#else
-#define LAST_PKMAP 1024
-#endif
-
-#define PKMAP_BASE ((FIXADDR_BOOT_START - PAGE_SIZE * (LAST_PKMAP + 1))	\
-		    & PMD_MASK)
-
-#ifdef CONFIG_HIGHMEM
-# define VMALLOC_END	(PKMAP_BASE - 2 * PAGE_SIZE)
-#else
-# define VMALLOC_END	(FIXADDR_START - 2 * PAGE_SIZE)
-#endif
-
-#define MAXMEM	(VMALLOC_END - PAGE_OFFSET - __VMALLOC_RESERVE)
-
-/*
- * Define this if things work differently on an i386 and an i486:
- * it will (on an i486) warn about kernel memory accesses that are
- * done without a 'access_ok(VERIFY_WRITE,..)'
- */
-#undef TEST_ACCESS_OK
-
-/* The boot page tables (all created as a single array) */
-extern unsigned long pg0[];
-
-#define pte_present(x)	((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
-
-/* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
-#define pmd_none(x)	(!(unsigned long)pmd_val((x)))
-#define pmd_present(x)	(pmd_val((x)) & _PAGE_PRESENT)
-#define pmd_bad(x) ((pmd_val(x) & (PTE_FLAGS_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
-
-#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
-
-#ifdef CONFIG_X86_PAE
-# include <asm/pgtable-3level.h>
-#else
-# include <asm/pgtable-2level.h>
-#endif
-
-/*
- * Macro to mark a page protection value as "uncacheable".
- * On processors which do not support it, this is a no-op.
- */
-#define pgprot_noncached(prot)					\
-	((boot_cpu_data.x86 > 3)				\
-	 ? (__pgprot(pgprot_val(prot) | _PAGE_PCD | _PAGE_PWT))	\
-	 : (prot))
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
-
-
-static inline int pud_large(pud_t pud) { return 0; }
-
-/*
- * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
- *
- * this macro returns the index of the entry in the pmd page which would
- * control the given virtual address
- */
-#define pmd_index(address)				\
-	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
-
-/*
- * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
- *
- * this macro returns the index of the entry in the pte page which would
- * control the given virtual address
- */
-#define pte_index(address)					\
-	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, address)				\
-	((pte_t *)pmd_page_vaddr(*(dir)) +  pte_index((address)))
-
-#define pmd_page(pmd) (pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
-
-#define pmd_page_vaddr(pmd)					\
-	((unsigned long)__va(pmd_val((pmd)) & PTE_PFN_MASK))
-
-#if defined(CONFIG_HIGHPTE)
-#define pte_offset_map(dir, address)					\
-	((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE0) +		\
-	 pte_index((address)))
-#define pte_offset_map_nested(dir, address)				\
-	((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE1) +		\
-	 pte_index((address)))
-#define pte_unmap(pte) kunmap_atomic((pte), KM_PTE0)
-#define pte_unmap_nested(pte) kunmap_atomic((pte), KM_PTE1)
-#else
-#define pte_offset_map(dir, address)					\
-	((pte_t *)page_address(pmd_page(*(dir))) + pte_index((address)))
-#define pte_offset_map_nested(dir, address) pte_offset_map((dir), (address))
-#define pte_unmap(pte) do { } while (0)
-#define pte_unmap_nested(pte) do { } while (0)
-#endif
-
-/* Clear a kernel PTE and flush it from the TLB */
-#define kpte_clear_flush(ptep, vaddr)		\
-do {						\
-	pte_clear(&init_mm, (vaddr), (ptep));	\
-	__flush_tlb_one((vaddr));		\
-} while (0)
-
-/*
- * The i386 doesn't have any external MMU info: the kernel page
- * tables contain all the necessary information.
- */
-#define update_mmu_cache(vma, address, pte) do { } while (0)
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * kern_addr_valid() is (1) for FLATMEM and (0) for
- * SPARSEMEM and DISCONTIGMEM
- */
-#ifdef CONFIG_FLATMEM
-#define kern_addr_valid(addr)	(1)
-#else
-#define kern_addr_valid(kaddr)	(0)
-#endif
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
-	remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-#endif /* ASM_X86__PGTABLE_32_H */
diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h
deleted file mode 100644
index fde9770..0000000
--- a/include/asm-x86/pgtable_64.h
+++ /dev/null
@@ -1,285 +0,0 @@
-#ifndef ASM_X86__PGTABLE_64_H
-#define ASM_X86__PGTABLE_64_H
-
-#include <linux/const.h>
-#ifndef __ASSEMBLY__
-
-/*
- * This file contains the functions and defines necessary to modify and use
- * the x86-64 page table tree.
- */
-#include <asm/processor.h>
-#include <linux/bitops.h>
-#include <linux/threads.h>
-#include <asm/pda.h>
-
-extern pud_t level3_kernel_pgt[512];
-extern pud_t level3_ident_pgt[512];
-extern pmd_t level2_kernel_pgt[512];
-extern pmd_t level2_fixmap_pgt[512];
-extern pmd_t level2_ident_pgt[512];
-extern pgd_t init_level4_pgt[];
-
-#define swapper_pg_dir init_level4_pgt
-
-extern void paging_init(void);
-
-#endif /* !__ASSEMBLY__ */
-
-#define SHARED_KERNEL_PMD	0
-
-/*
- * PGDIR_SHIFT determines what a top-level page table entry can map
- */
-#define PGDIR_SHIFT	39
-#define PTRS_PER_PGD	512
-
-/*
- * 3rd level page
- */
-#define PUD_SHIFT	30
-#define PTRS_PER_PUD	512
-
-/*
- * PMD_SHIFT determines the size of the area a middle-level
- * page table can map
- */
-#define PMD_SHIFT	21
-#define PTRS_PER_PMD	512
-
-/*
- * entries per page directory level
- */
-#define PTRS_PER_PTE	512
-
-#ifndef __ASSEMBLY__
-
-#define pte_ERROR(e)					\
-	printk("%s:%d: bad pte %p(%016lx).\n",		\
-	       __FILE__, __LINE__, &(e), pte_val(e))
-#define pmd_ERROR(e)					\
-	printk("%s:%d: bad pmd %p(%016lx).\n",		\
-	       __FILE__, __LINE__, &(e), pmd_val(e))
-#define pud_ERROR(e)					\
-	printk("%s:%d: bad pud %p(%016lx).\n",		\
-	       __FILE__, __LINE__, &(e), pud_val(e))
-#define pgd_ERROR(e)					\
-	printk("%s:%d: bad pgd %p(%016lx).\n",		\
-	       __FILE__, __LINE__, &(e), pgd_val(e))
-
-#define pgd_none(x)	(!pgd_val(x))
-#define pud_none(x)	(!pud_val(x))
-
-struct mm_struct;
-
-void set_pte_vaddr_pud(pud_t *pud_page, unsigned long vaddr, pte_t new_pte);
-
-
-static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr,
-				    pte_t *ptep)
-{
-	*ptep = native_make_pte(0);
-}
-
-static inline void native_set_pte(pte_t *ptep, pte_t pte)
-{
-	*ptep = pte;
-}
-
-static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
-{
-	native_set_pte(ptep, pte);
-}
-
-static inline pte_t native_ptep_get_and_clear(pte_t *xp)
-{
-#ifdef CONFIG_SMP
-	return native_make_pte(xchg(&xp->pte, 0));
-#else
-	/* native_local_ptep_get_and_clear,
-	   but duplicated because of cyclic dependency */
-	pte_t ret = *xp;
-	native_pte_clear(NULL, 0, xp);
-	return ret;
-#endif
-}
-
-static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
-{
-	*pmdp = pmd;
-}
-
-static inline void native_pmd_clear(pmd_t *pmd)
-{
-	native_set_pmd(pmd, native_make_pmd(0));
-}
-
-static inline void native_set_pud(pud_t *pudp, pud_t pud)
-{
-	*pudp = pud;
-}
-
-static inline void native_pud_clear(pud_t *pud)
-{
-	native_set_pud(pud, native_make_pud(0));
-}
-
-static inline void native_set_pgd(pgd_t *pgdp, pgd_t pgd)
-{
-	*pgdp = pgd;
-}
-
-static inline void native_pgd_clear(pgd_t *pgd)
-{
-	native_set_pgd(pgd, native_make_pgd(0));
-}
-
-#define pte_same(a, b)		((a).pte == (b).pte)
-
-#endif /* !__ASSEMBLY__ */
-
-#define PMD_SIZE	(_AC(1, UL) << PMD_SHIFT)
-#define PMD_MASK	(~(PMD_SIZE - 1))
-#define PUD_SIZE	(_AC(1, UL) << PUD_SHIFT)
-#define PUD_MASK	(~(PUD_SIZE - 1))
-#define PGDIR_SIZE	(_AC(1, UL) << PGDIR_SHIFT)
-#define PGDIR_MASK	(~(PGDIR_SIZE - 1))
-
-
-#define MAXMEM		 _AC(0x00003fffffffffff, UL)
-#define VMALLOC_START    _AC(0xffffc20000000000, UL)
-#define VMALLOC_END      _AC(0xffffe1ffffffffff, UL)
-#define VMEMMAP_START	 _AC(0xffffe20000000000, UL)
-#define MODULES_VADDR    _AC(0xffffffffa0000000, UL)
-#define MODULES_END      _AC(0xffffffffff000000, UL)
-#define MODULES_LEN   (MODULES_END - MODULES_VADDR)
-
-#ifndef __ASSEMBLY__
-
-static inline int pgd_bad(pgd_t pgd)
-{
-	return (pgd_val(pgd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
-}
-
-static inline int pud_bad(pud_t pud)
-{
-	return (pud_val(pud) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
-}
-
-static inline int pmd_bad(pmd_t pmd)
-{
-	return (pmd_val(pmd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
-}
-
-#define pte_none(x)	(!pte_val((x)))
-#define pte_present(x)	(pte_val((x)) & (_PAGE_PRESENT | _PAGE_PROTNONE))
-
-#define pages_to_mb(x)	((x) >> (20 - PAGE_SHIFT))   /* FIXME: is this right? */
-
-/*
- * Macro to mark a page protection value as "uncacheable".
- */
-#define pgprot_noncached(prot)					\
-	(__pgprot(pgprot_val((prot)) | _PAGE_PCD | _PAGE_PWT))
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-
-/*
- * Level 4 access.
- */
-#define pgd_page_vaddr(pgd)						\
-	((unsigned long)__va((unsigned long)pgd_val((pgd)) & PTE_PFN_MASK))
-#define pgd_page(pgd)		(pfn_to_page(pgd_val((pgd)) >> PAGE_SHIFT))
-#define pgd_present(pgd) (pgd_val(pgd) & _PAGE_PRESENT)
-static inline int pgd_large(pgd_t pgd) { return 0; }
-#define mk_kernel_pgd(address) __pgd((address) | _KERNPG_TABLE)
-
-/* PUD - Level3 access */
-/* to find an entry in a page-table-directory. */
-#define pud_page_vaddr(pud)						\
-	((unsigned long)__va(pud_val((pud)) & PHYSICAL_PAGE_MASK))
-#define pud_page(pud)	(pfn_to_page(pud_val((pud)) >> PAGE_SHIFT))
-#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
-#define pud_offset(pgd, address)					\
-	((pud_t *)pgd_page_vaddr(*(pgd)) + pud_index((address)))
-#define pud_present(pud) (pud_val((pud)) & _PAGE_PRESENT)
-
-static inline int pud_large(pud_t pte)
-{
-	return (pud_val(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
-		(_PAGE_PSE | _PAGE_PRESENT);
-}
-
-/* PMD  - Level 2 access */
-#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val((pmd)) & PTE_PFN_MASK))
-#define pmd_page(pmd)		(pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
-
-#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
-#define pmd_offset(dir, address) ((pmd_t *)pud_page_vaddr(*(dir)) + \
-				  pmd_index(address))
-#define pmd_none(x)	(!pmd_val((x)))
-#define pmd_present(x)	(pmd_val((x)) & _PAGE_PRESENT)
-#define pfn_pmd(nr, prot) (__pmd(((nr) << PAGE_SHIFT) | pgprot_val((prot))))
-#define pmd_pfn(x)  ((pmd_val((x)) & __PHYSICAL_MASK) >> PAGE_SHIFT)
-
-#define pte_to_pgoff(pte) ((pte_val((pte)) & PHYSICAL_PAGE_MASK) >> PAGE_SHIFT)
-#define pgoff_to_pte(off) ((pte_t) { .pte = ((off) << PAGE_SHIFT) |	\
-					    _PAGE_FILE })
-#define PTE_FILE_MAX_BITS __PHYSICAL_MASK_SHIFT
-
-/* PTE - Level 1 access. */
-
-/* page, protection -> pte */
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn((page)), (pgprot))
-
-#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, address) ((pte_t *) pmd_page_vaddr(*(dir)) + \
-					 pte_index((address)))
-
-/* x86-64 always has all page tables mapped. */
-#define pte_offset_map(dir, address) pte_offset_kernel((dir), (address))
-#define pte_offset_map_nested(dir, address) pte_offset_kernel((dir), (address))
-#define pte_unmap(pte) /* NOP */
-#define pte_unmap_nested(pte) /* NOP */
-
-#define update_mmu_cache(vma, address, pte) do { } while (0)
-
-extern int direct_gbpages;
-
-/* Encode and de-code a swap entry */
-#define __swp_type(x)			(((x).val >> 1) & 0x3f)
-#define __swp_offset(x)			((x).val >> 8)
-#define __swp_entry(type, offset)	((swp_entry_t) { ((type) << 1) | \
-							 ((offset) << 8) })
-#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val((pte)) })
-#define __swp_entry_to_pte(x)		((pte_t) { .pte = (x).val })
-
-extern int kern_addr_valid(unsigned long addr);
-extern void cleanup_highmap(void);
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
-	remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-#define HAVE_ARCH_UNMAPPED_AREA
-#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
-
-#define pgtable_cache_init()   do { } while (0)
-#define check_pgt_cache()      do { } while (0)
-
-#define PAGE_AGP    PAGE_KERNEL_NOCACHE
-#define HAVE_PAGE_AGP 1
-
-/* fs/proc/kcore.c */
-#define	kc_vaddr_to_offset(v) ((v) & __VIRTUAL_MASK)
-#define	kc_offset_to_vaddr(o)				\
-	(((o) & (1UL << (__VIRTUAL_MASK_SHIFT - 1)))	\
-	 ? ((o) | ~__VIRTUAL_MASK)			\
-	 : (o))
-
-#define __HAVE_ARCH_PTE_SAME
-#endif /* !__ASSEMBLY__ */
-
-#endif /* ASM_X86__PGTABLE_64_H */
diff --git a/include/asm-x86/posix_types_32.h b/include/asm-x86/posix_types_32.h
deleted file mode 100644
index 70cf2bb..0000000
--- a/include/asm-x86/posix_types_32.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef ASM_X86__POSIX_TYPES_32_H
-#define ASM_X86__POSIX_TYPES_32_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long	__kernel_ino_t;
-typedef unsigned short	__kernel_mode_t;
-typedef unsigned short	__kernel_nlink_t;
-typedef long		__kernel_off_t;
-typedef int		__kernel_pid_t;
-typedef unsigned short	__kernel_ipc_pid_t;
-typedef unsigned short	__kernel_uid_t;
-typedef unsigned short	__kernel_gid_t;
-typedef unsigned int	__kernel_size_t;
-typedef int		__kernel_ssize_t;
-typedef int		__kernel_ptrdiff_t;
-typedef long		__kernel_time_t;
-typedef long		__kernel_suseconds_t;
-typedef long		__kernel_clock_t;
-typedef int		__kernel_timer_t;
-typedef int		__kernel_clockid_t;
-typedef int		__kernel_daddr_t;
-typedef char *		__kernel_caddr_t;
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
-typedef unsigned int	__kernel_uid32_t;
-typedef unsigned int	__kernel_gid32_t;
-
-typedef unsigned short	__kernel_old_uid_t;
-typedef unsigned short	__kernel_old_gid_t;
-typedef unsigned short	__kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long	__kernel_loff_t;
-#endif
-
-typedef struct {
-	int	val[2];
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__)
-
-#undef	__FD_SET
-#define __FD_SET(fd,fdsetp)					\
-	asm volatile("btsl %1,%0":				\
-		     "+m" (*(__kernel_fd_set *)(fdsetp))	\
-		     : "r" ((int)(fd)))
-
-#undef	__FD_CLR
-#define __FD_CLR(fd,fdsetp)					\
-	asm volatile("btrl %1,%0":				\
-		     "+m" (*(__kernel_fd_set *)(fdsetp))	\
-		     : "r" ((int) (fd)))
-
-#undef	__FD_ISSET
-#define __FD_ISSET(fd,fdsetp)					\
-	(__extension__						\
-	 ({							\
-	 unsigned char __result;				\
-	 asm volatile("btl %1,%2 ; setb %0"			\
-		      : "=q" (__result)				\
-		      : "r" ((int)(fd)),			\
-			"m" (*(__kernel_fd_set *)(fdsetp)));	\
-	 __result;						\
-}))
-
-#undef	__FD_ZERO
-#define __FD_ZERO(fdsetp)					\
-do {								\
-	int __d0, __d1;						\
-	asm volatile("cld ; rep ; stosl"			\
-		     : "=m" (*(__kernel_fd_set *)(fdsetp)),	\
-		       "=&c" (__d0), "=&D" (__d1)		\
-		     : "a" (0), "1" (__FDSET_LONGS),		\
-		       "2" ((__kernel_fd_set *)(fdsetp))	\
-		     : "memory");				\
-} while (0)
-
-#endif /* defined(__KERNEL__) */
-
-#endif /* ASM_X86__POSIX_TYPES_32_H */
diff --git a/include/asm-x86/posix_types_64.h b/include/asm-x86/posix_types_64.h
deleted file mode 100644
index 388b4e7..0000000
--- a/include/asm-x86/posix_types_64.h
+++ /dev/null
@@ -1,119 +0,0 @@
-#ifndef ASM_X86__POSIX_TYPES_64_H
-#define ASM_X86__POSIX_TYPES_64_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long	__kernel_ino_t;
-typedef unsigned int	__kernel_mode_t;
-typedef unsigned long	__kernel_nlink_t;
-typedef long		__kernel_off_t;
-typedef int		__kernel_pid_t;
-typedef int		__kernel_ipc_pid_t;
-typedef unsigned int	__kernel_uid_t;
-typedef unsigned int	__kernel_gid_t;
-typedef unsigned long	__kernel_size_t;
-typedef long		__kernel_ssize_t;
-typedef long		__kernel_ptrdiff_t;
-typedef long		__kernel_time_t;
-typedef long		__kernel_suseconds_t;
-typedef long		__kernel_clock_t;
-typedef int		__kernel_timer_t;
-typedef int		__kernel_clockid_t;
-typedef int		__kernel_daddr_t;
-typedef char *		__kernel_caddr_t;
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
-
-#ifdef __GNUC__
-typedef long long	__kernel_loff_t;
-#endif
-
-typedef struct {
-	int	val[2];
-} __kernel_fsid_t;
-
-typedef unsigned short __kernel_old_uid_t;
-typedef unsigned short __kernel_old_gid_t;
-typedef __kernel_uid_t __kernel_uid32_t;
-typedef __kernel_gid_t __kernel_gid32_t;
-
-typedef unsigned long	__kernel_old_dev_t;
-
-#ifdef __KERNEL__
-
-#undef __FD_SET
-static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
-}
-
-#undef __FD_CLR
-static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
-}
-
-#undef __FD_ISSET
-static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant cases (8 or 32 longs,
- * for 256 and 1024-bit fd_sets respectively)
- */
-#undef __FD_ZERO
-static inline void __FD_ZERO(__kernel_fd_set *p)
-{
-	unsigned long *tmp = p->fds_bits;
-	int i;
-
-	if (__builtin_constant_p(__FDSET_LONGS)) {
-		switch (__FDSET_LONGS) {
-		case 32:
-			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
-			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
-			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
-			tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
-			tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
-			tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
-			tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
-			return;
-		case 16:
-			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
-			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
-			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
-			return;
-		case 8:
-			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
-			return;
-		case 4:
-			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-			return;
-		}
-	}
-	i = __FDSET_LONGS;
-	while (i) {
-		i--;
-		*tmp = 0;
-		tmp++;
-	}
-}
-
-#endif /* defined(__KERNEL__) */
-
-#endif /* ASM_X86__POSIX_TYPES_64_H */
diff --git a/include/asm-x86/prctl.h b/include/asm-x86/prctl.h
deleted file mode 100644
index e7ae34e..0000000
--- a/include/asm-x86/prctl.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef ASM_X86__PRCTL_H
-#define ASM_X86__PRCTL_H
-
-#define ARCH_SET_GS 0x1001
-#define ARCH_SET_FS 0x1002
-#define ARCH_GET_FS 0x1003
-#define ARCH_GET_GS 0x1004
-
-
-#endif /* ASM_X86__PRCTL_H */
diff --git a/include/asm-x86/processor-flags.h b/include/asm-x86/processor-flags.h
deleted file mode 100644
index dc5f071..0000000
--- a/include/asm-x86/processor-flags.h
+++ /dev/null
@@ -1,100 +0,0 @@
-#ifndef ASM_X86__PROCESSOR_FLAGS_H
-#define ASM_X86__PROCESSOR_FLAGS_H
-/* Various flags defined: can be included from assembler. */
-
-/*
- * EFLAGS bits
- */
-#define X86_EFLAGS_CF	0x00000001 /* Carry Flag */
-#define X86_EFLAGS_PF	0x00000004 /* Parity Flag */
-#define X86_EFLAGS_AF	0x00000010 /* Auxillary carry Flag */
-#define X86_EFLAGS_ZF	0x00000040 /* Zero Flag */
-#define X86_EFLAGS_SF	0x00000080 /* Sign Flag */
-#define X86_EFLAGS_TF	0x00000100 /* Trap Flag */
-#define X86_EFLAGS_IF	0x00000200 /* Interrupt Flag */
-#define X86_EFLAGS_DF	0x00000400 /* Direction Flag */
-#define X86_EFLAGS_OF	0x00000800 /* Overflow Flag */
-#define X86_EFLAGS_IOPL	0x00003000 /* IOPL mask */
-#define X86_EFLAGS_NT	0x00004000 /* Nested Task */
-#define X86_EFLAGS_RF	0x00010000 /* Resume Flag */
-#define X86_EFLAGS_VM	0x00020000 /* Virtual Mode */
-#define X86_EFLAGS_AC	0x00040000 /* Alignment Check */
-#define X86_EFLAGS_VIF	0x00080000 /* Virtual Interrupt Flag */
-#define X86_EFLAGS_VIP	0x00100000 /* Virtual Interrupt Pending */
-#define X86_EFLAGS_ID	0x00200000 /* CPUID detection flag */
-
-/*
- * Basic CPU control in CR0
- */
-#define X86_CR0_PE	0x00000001 /* Protection Enable */
-#define X86_CR0_MP	0x00000002 /* Monitor Coprocessor */
-#define X86_CR0_EM	0x00000004 /* Emulation */
-#define X86_CR0_TS	0x00000008 /* Task Switched */
-#define X86_CR0_ET	0x00000010 /* Extension Type */
-#define X86_CR0_NE	0x00000020 /* Numeric Error */
-#define X86_CR0_WP	0x00010000 /* Write Protect */
-#define X86_CR0_AM	0x00040000 /* Alignment Mask */
-#define X86_CR0_NW	0x20000000 /* Not Write-through */
-#define X86_CR0_CD	0x40000000 /* Cache Disable */
-#define X86_CR0_PG	0x80000000 /* Paging */
-
-/*
- * Paging options in CR3
- */
-#define X86_CR3_PWT	0x00000008 /* Page Write Through */
-#define X86_CR3_PCD	0x00000010 /* Page Cache Disable */
-
-/*
- * Intel CPU features in CR4
- */
-#define X86_CR4_VME	0x00000001 /* enable vm86 extensions */
-#define X86_CR4_PVI	0x00000002 /* virtual interrupts flag enable */
-#define X86_CR4_TSD	0x00000004 /* disable time stamp at ipl 3 */
-#define X86_CR4_DE	0x00000008 /* enable debugging extensions */
-#define X86_CR4_PSE	0x00000010 /* enable page size extensions */
-#define X86_CR4_PAE	0x00000020 /* enable physical address extensions */
-#define X86_CR4_MCE	0x00000040 /* Machine check enable */
-#define X86_CR4_PGE	0x00000080 /* enable global pages */
-#define X86_CR4_PCE	0x00000100 /* enable performance counters at ipl 3 */
-#define X86_CR4_OSFXSR	0x00000200 /* enable fast FPU save and restore */
-#define X86_CR4_OSXMMEXCPT 0x00000400 /* enable unmasked SSE exceptions */
-#define X86_CR4_VMXE	0x00002000 /* enable VMX virtualization */
-#define X86_CR4_OSXSAVE 0x00040000 /* enable xsave and xrestore */
-
-/*
- * x86-64 Task Priority Register, CR8
- */
-#define X86_CR8_TPR	0x0000000F /* task priority register */
-
-/*
- * AMD and Transmeta use MSRs for configuration; see <asm/msr-index.h>
- */
-
-/*
- *      NSC/Cyrix CPU configuration register indexes
- */
-#define CX86_PCR0	0x20
-#define CX86_GCR	0xb8
-#define CX86_CCR0	0xc0
-#define CX86_CCR1	0xc1
-#define CX86_CCR2	0xc2
-#define CX86_CCR3	0xc3
-#define CX86_CCR4	0xe8
-#define CX86_CCR5	0xe9
-#define CX86_CCR6	0xea
-#define CX86_CCR7	0xeb
-#define CX86_PCR1	0xf0
-#define CX86_DIR0	0xfe
-#define CX86_DIR1	0xff
-#define CX86_ARR_BASE	0xc4
-#define CX86_RCR_BASE	0xdc
-
-#ifdef __KERNEL__
-#ifdef CONFIG_VM86
-#define X86_VM_MASK	X86_EFLAGS_VM
-#else
-#define X86_VM_MASK	0 /* No VM86 support */
-#endif
-#endif
-
-#endif /* ASM_X86__PROCESSOR_FLAGS_H */
diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h
deleted file mode 100644
index ee7cbb3..0000000
--- a/include/asm-x86/processor.h
+++ /dev/null
@@ -1,936 +0,0 @@
-#ifndef ASM_X86__PROCESSOR_H
-#define ASM_X86__PROCESSOR_H
-
-#include <asm/processor-flags.h>
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-struct mm_struct;
-
-#include <asm/vm86.h>
-#include <asm/math_emu.h>
-#include <asm/segment.h>
-#include <asm/types.h>
-#include <asm/sigcontext.h>
-#include <asm/current.h>
-#include <asm/cpufeature.h>
-#include <asm/system.h>
-#include <asm/page.h>
-#include <asm/percpu.h>
-#include <asm/msr.h>
-#include <asm/desc_defs.h>
-#include <asm/nops.h>
-#include <asm/ds.h>
-
-#include <linux/personality.h>
-#include <linux/cpumask.h>
-#include <linux/cache.h>
-#include <linux/threads.h>
-#include <linux/init.h>
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-static inline void *current_text_addr(void)
-{
-	void *pc;
-
-	asm volatile("mov $1f, %0; 1:":"=r" (pc));
-
-	return pc;
-}
-
-#ifdef CONFIG_X86_VSMP
-# define ARCH_MIN_TASKALIGN		(1 << INTERNODE_CACHE_SHIFT)
-# define ARCH_MIN_MMSTRUCT_ALIGN	(1 << INTERNODE_CACHE_SHIFT)
-#else
-# define ARCH_MIN_TASKALIGN		16
-# define ARCH_MIN_MMSTRUCT_ALIGN	0
-#endif
-
-/*
- *  CPU type and hardware bug flags. Kept separately for each CPU.
- *  Members of this structure are referenced in head.S, so think twice
- *  before touching them. [mj]
- */
-
-struct cpuinfo_x86 {
-	__u8			x86;		/* CPU family */
-	__u8			x86_vendor;	/* CPU vendor */
-	__u8			x86_model;
-	__u8			x86_mask;
-#ifdef CONFIG_X86_32
-	char			wp_works_ok;	/* It doesn't on 386's */
-
-	/* Problems on some 486Dx4's and old 386's: */
-	char			hlt_works_ok;
-	char			hard_math;
-	char			rfu;
-	char			fdiv_bug;
-	char			f00f_bug;
-	char			coma_bug;
-	char			pad0;
-#else
-	/* Number of 4K pages in DTLB/ITLB combined(in pages): */
-	int			 x86_tlbsize;
-	__u8			x86_virt_bits;
-	__u8			x86_phys_bits;
-#endif
-	/* CPUID returned core id bits: */
-	__u8			x86_coreid_bits;
-	/* Max extended CPUID function supported: */
-	__u32			extended_cpuid_level;
-	/* Maximum supported CPUID level, -1=no CPUID: */
-	int			cpuid_level;
-	__u32			x86_capability[NCAPINTS];
-	char			x86_vendor_id[16];
-	char			x86_model_id[64];
-	/* in KB - valid for CPUS which support this call: */
-	int			x86_cache_size;
-	int			x86_cache_alignment;	/* In bytes */
-	int			x86_power;
-	unsigned long		loops_per_jiffy;
-#ifdef CONFIG_SMP
-	/* cpus sharing the last level cache: */
-	cpumask_t		llc_shared_map;
-#endif
-	/* cpuid returned max cores value: */
-	u16			 x86_max_cores;
-	u16			apicid;
-	u16			initial_apicid;
-	u16			x86_clflush_size;
-#ifdef CONFIG_SMP
-	/* number of cores as seen by the OS: */
-	u16			booted_cores;
-	/* Physical processor id: */
-	u16			phys_proc_id;
-	/* Core id: */
-	u16			cpu_core_id;
-	/* Index into per_cpu list: */
-	u16			cpu_index;
-#endif
-} __attribute__((__aligned__(SMP_CACHE_BYTES)));
-
-#define X86_VENDOR_INTEL	0
-#define X86_VENDOR_CYRIX	1
-#define X86_VENDOR_AMD		2
-#define X86_VENDOR_UMC		3
-#define X86_VENDOR_CENTAUR	5
-#define X86_VENDOR_TRANSMETA	7
-#define X86_VENDOR_NSC		8
-#define X86_VENDOR_NUM		9
-
-#define X86_VENDOR_UNKNOWN	0xff
-
-/*
- * capabilities of CPUs
- */
-extern struct cpuinfo_x86	boot_cpu_data;
-extern struct cpuinfo_x86	new_cpu_data;
-
-extern struct tss_struct	doublefault_tss;
-extern __u32			cleared_cpu_caps[NCAPINTS];
-
-#ifdef CONFIG_SMP
-DECLARE_PER_CPU(struct cpuinfo_x86, cpu_info);
-#define cpu_data(cpu)		per_cpu(cpu_info, cpu)
-#define current_cpu_data	__get_cpu_var(cpu_info)
-#else
-#define cpu_data(cpu)		boot_cpu_data
-#define current_cpu_data	boot_cpu_data
-#endif
-
-extern const struct seq_operations cpuinfo_op;
-
-static inline int hlt_works(int cpu)
-{
-#ifdef CONFIG_X86_32
-	return cpu_data(cpu).hlt_works_ok;
-#else
-	return 1;
-#endif
-}
-
-#define cache_line_size()	(boot_cpu_data.x86_cache_alignment)
-
-extern void cpu_detect(struct cpuinfo_x86 *c);
-
-extern struct pt_regs *idle_regs(struct pt_regs *);
-
-extern void early_cpu_init(void);
-extern void identify_boot_cpu(void);
-extern void identify_secondary_cpu(struct cpuinfo_x86 *);
-extern void print_cpu_info(struct cpuinfo_x86 *);
-extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c);
-extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
-extern unsigned short num_cache_leaves;
-
-extern void detect_extended_topology(struct cpuinfo_x86 *c);
-extern void detect_ht(struct cpuinfo_x86 *c);
-
-static inline void native_cpuid(unsigned int *eax, unsigned int *ebx,
-				unsigned int *ecx, unsigned int *edx)
-{
-	/* ecx is often an input as well as an output. */
-	asm("cpuid"
-	    : "=a" (*eax),
-	      "=b" (*ebx),
-	      "=c" (*ecx),
-	      "=d" (*edx)
-	    : "0" (*eax), "2" (*ecx));
-}
-
-static inline void load_cr3(pgd_t *pgdir)
-{
-	write_cr3(__pa(pgdir));
-}
-
-#ifdef CONFIG_X86_32
-/* This is the TSS defined by the hardware. */
-struct x86_hw_tss {
-	unsigned short		back_link, __blh;
-	unsigned long		sp0;
-	unsigned short		ss0, __ss0h;
-	unsigned long		sp1;
-	/* ss1 caches MSR_IA32_SYSENTER_CS: */
-	unsigned short		ss1, __ss1h;
-	unsigned long		sp2;
-	unsigned short		ss2, __ss2h;
-	unsigned long		__cr3;
-	unsigned long		ip;
-	unsigned long		flags;
-	unsigned long		ax;
-	unsigned long		cx;
-	unsigned long		dx;
-	unsigned long		bx;
-	unsigned long		sp;
-	unsigned long		bp;
-	unsigned long		si;
-	unsigned long		di;
-	unsigned short		es, __esh;
-	unsigned short		cs, __csh;
-	unsigned short		ss, __ssh;
-	unsigned short		ds, __dsh;
-	unsigned short		fs, __fsh;
-	unsigned short		gs, __gsh;
-	unsigned short		ldt, __ldth;
-	unsigned short		trace;
-	unsigned short		io_bitmap_base;
-
-} __attribute__((packed));
-#else
-struct x86_hw_tss {
-	u32			reserved1;
-	u64			sp0;
-	u64			sp1;
-	u64			sp2;
-	u64			reserved2;
-	u64			ist[7];
-	u32			reserved3;
-	u32			reserved4;
-	u16			reserved5;
-	u16			io_bitmap_base;
-
-} __attribute__((packed)) ____cacheline_aligned;
-#endif
-
-/*
- * IO-bitmap sizes:
- */
-#define IO_BITMAP_BITS			65536
-#define IO_BITMAP_BYTES			(IO_BITMAP_BITS/8)
-#define IO_BITMAP_LONGS			(IO_BITMAP_BYTES/sizeof(long))
-#define IO_BITMAP_OFFSET		offsetof(struct tss_struct, io_bitmap)
-#define INVALID_IO_BITMAP_OFFSET	0x8000
-#define INVALID_IO_BITMAP_OFFSET_LAZY	0x9000
-
-struct tss_struct {
-	/*
-	 * The hardware state:
-	 */
-	struct x86_hw_tss	x86_tss;
-
-	/*
-	 * The extra 1 is there because the CPU will access an
-	 * additional byte beyond the end of the IO permission
-	 * bitmap. The extra byte must be all 1 bits, and must
-	 * be within the limit.
-	 */
-	unsigned long		io_bitmap[IO_BITMAP_LONGS + 1];
-	/*
-	 * Cache the current maximum and the last task that used the bitmap:
-	 */
-	unsigned long		io_bitmap_max;
-	struct thread_struct	*io_bitmap_owner;
-
-	/*
-	 * .. and then another 0x100 bytes for the emergency kernel stack:
-	 */
-	unsigned long		stack[64];
-
-} ____cacheline_aligned;
-
-DECLARE_PER_CPU(struct tss_struct, init_tss);
-
-/*
- * Save the original ist values for checking stack pointers during debugging
- */
-struct orig_ist {
-	unsigned long		ist[7];
-};
-
-#define	MXCSR_DEFAULT		0x1f80
-
-struct i387_fsave_struct {
-	u32			cwd;	/* FPU Control Word		*/
-	u32			swd;	/* FPU Status Word		*/
-	u32			twd;	/* FPU Tag Word			*/
-	u32			fip;	/* FPU IP Offset		*/
-	u32			fcs;	/* FPU IP Selector		*/
-	u32			foo;	/* FPU Operand Pointer Offset	*/
-	u32			fos;	/* FPU Operand Pointer Selector	*/
-
-	/* 8*10 bytes for each FP-reg = 80 bytes:			*/
-	u32			st_space[20];
-
-	/* Software status information [not touched by FSAVE ]:		*/
-	u32			status;
-};
-
-struct i387_fxsave_struct {
-	u16			cwd; /* Control Word			*/
-	u16			swd; /* Status Word			*/
-	u16			twd; /* Tag Word			*/
-	u16			fop; /* Last Instruction Opcode		*/
-	union {
-		struct {
-			u64	rip; /* Instruction Pointer		*/
-			u64	rdp; /* Data Pointer			*/
-		};
-		struct {
-			u32	fip; /* FPU IP Offset			*/
-			u32	fcs; /* FPU IP Selector			*/
-			u32	foo; /* FPU Operand Offset		*/
-			u32	fos; /* FPU Operand Selector		*/
-		};
-	};
-	u32			mxcsr;		/* MXCSR Register State */
-	u32			mxcsr_mask;	/* MXCSR Mask		*/
-
-	/* 8*16 bytes for each FP-reg = 128 bytes:			*/
-	u32			st_space[32];
-
-	/* 16*16 bytes for each XMM-reg = 256 bytes:			*/
-	u32			xmm_space[64];
-
-	u32			padding[12];
-
-	union {
-		u32		padding1[12];
-		u32		sw_reserved[12];
-	};
-
-} __attribute__((aligned(16)));
-
-struct i387_soft_struct {
-	u32			cwd;
-	u32			swd;
-	u32			twd;
-	u32			fip;
-	u32			fcs;
-	u32			foo;
-	u32			fos;
-	/* 8*10 bytes for each FP-reg = 80 bytes: */
-	u32			st_space[20];
-	u8			ftop;
-	u8			changed;
-	u8			lookahead;
-	u8			no_update;
-	u8			rm;
-	u8			alimit;
-	struct info		*info;
-	u32			entry_eip;
-};
-
-struct xsave_hdr_struct {
-	u64 xstate_bv;
-	u64 reserved1[2];
-	u64 reserved2[5];
-} __attribute__((packed));
-
-struct xsave_struct {
-	struct i387_fxsave_struct i387;
-	struct xsave_hdr_struct xsave_hdr;
-	/* new processor state extensions will go here */
-} __attribute__ ((packed, aligned (64)));
-
-union thread_xstate {
-	struct i387_fsave_struct	fsave;
-	struct i387_fxsave_struct	fxsave;
-	struct i387_soft_struct		soft;
-	struct xsave_struct		xsave;
-};
-
-#ifdef CONFIG_X86_64
-DECLARE_PER_CPU(struct orig_ist, orig_ist);
-#endif
-
-extern void print_cpu_info(struct cpuinfo_x86 *);
-extern unsigned int xstate_size;
-extern void free_thread_xstate(struct task_struct *);
-extern struct kmem_cache *task_xstate_cachep;
-extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c);
-extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
-extern unsigned short num_cache_leaves;
-
-struct thread_struct {
-	/* Cached TLS descriptors: */
-	struct desc_struct	tls_array[GDT_ENTRY_TLS_ENTRIES];
-	unsigned long		sp0;
-	unsigned long		sp;
-#ifdef CONFIG_X86_32
-	unsigned long		sysenter_cs;
-#else
-	unsigned long		usersp;	/* Copy from PDA */
-	unsigned short		es;
-	unsigned short		ds;
-	unsigned short		fsindex;
-	unsigned short		gsindex;
-#endif
-	unsigned long		ip;
-	unsigned long		fs;
-	unsigned long		gs;
-	/* Hardware debugging registers: */
-	unsigned long		debugreg0;
-	unsigned long		debugreg1;
-	unsigned long		debugreg2;
-	unsigned long		debugreg3;
-	unsigned long		debugreg6;
-	unsigned long		debugreg7;
-	/* Fault info: */
-	unsigned long		cr2;
-	unsigned long		trap_no;
-	unsigned long		error_code;
-	/* floating point and extended processor state */
-	union thread_xstate	*xstate;
-#ifdef CONFIG_X86_32
-	/* Virtual 86 mode info */
-	struct vm86_struct __user *vm86_info;
-	unsigned long		screen_bitmap;
-	unsigned long		v86flags;
-	unsigned long		v86mask;
-	unsigned long		saved_sp0;
-	unsigned int		saved_fs;
-	unsigned int		saved_gs;
-#endif
-	/* IO permissions: */
-	unsigned long		*io_bitmap_ptr;
-	unsigned long		iopl;
-	/* Max allowed port in the bitmap, in bytes: */
-	unsigned		io_bitmap_max;
-/* MSR_IA32_DEBUGCTLMSR value to switch in if TIF_DEBUGCTLMSR is set.  */
-	unsigned long	debugctlmsr;
-#ifdef CONFIG_X86_DS
-/* Debug Store context; see include/asm-x86/ds.h; goes into MSR_IA32_DS_AREA */
-	struct ds_context	*ds_ctx;
-#endif /* CONFIG_X86_DS */
-#ifdef CONFIG_X86_PTRACE_BTS
-/* the signal to send on a bts buffer overflow */
-	unsigned int	bts_ovfl_signal;
-#endif /* CONFIG_X86_PTRACE_BTS */
-};
-
-static inline unsigned long native_get_debugreg(int regno)
-{
-	unsigned long val = 0;	/* Damn you, gcc! */
-
-	switch (regno) {
-	case 0:
-		asm("mov %%db0, %0" :"=r" (val));
-		break;
-	case 1:
-		asm("mov %%db1, %0" :"=r" (val));
-		break;
-	case 2:
-		asm("mov %%db2, %0" :"=r" (val));
-		break;
-	case 3:
-		asm("mov %%db3, %0" :"=r" (val));
-		break;
-	case 6:
-		asm("mov %%db6, %0" :"=r" (val));
-		break;
-	case 7:
-		asm("mov %%db7, %0" :"=r" (val));
-		break;
-	default:
-		BUG();
-	}
-	return val;
-}
-
-static inline void native_set_debugreg(int regno, unsigned long value)
-{
-	switch (regno) {
-	case 0:
-		asm("mov %0, %%db0"	::"r" (value));
-		break;
-	case 1:
-		asm("mov %0, %%db1"	::"r" (value));
-		break;
-	case 2:
-		asm("mov %0, %%db2"	::"r" (value));
-		break;
-	case 3:
-		asm("mov %0, %%db3"	::"r" (value));
-		break;
-	case 6:
-		asm("mov %0, %%db6"	::"r" (value));
-		break;
-	case 7:
-		asm("mov %0, %%db7"	::"r" (value));
-		break;
-	default:
-		BUG();
-	}
-}
-
-/*
- * Set IOPL bits in EFLAGS from given mask
- */
-static inline void native_set_iopl_mask(unsigned mask)
-{
-#ifdef CONFIG_X86_32
-	unsigned int reg;
-
-	asm volatile ("pushfl;"
-		      "popl %0;"
-		      "andl %1, %0;"
-		      "orl %2, %0;"
-		      "pushl %0;"
-		      "popfl"
-		      : "=&r" (reg)
-		      : "i" (~X86_EFLAGS_IOPL), "r" (mask));
-#endif
-}
-
-static inline void
-native_load_sp0(struct tss_struct *tss, struct thread_struct *thread)
-{
-	tss->x86_tss.sp0 = thread->sp0;
-#ifdef CONFIG_X86_32
-	/* Only happens when SEP is enabled, no need to test "SEP"arately: */
-	if (unlikely(tss->x86_tss.ss1 != thread->sysenter_cs)) {
-		tss->x86_tss.ss1 = thread->sysenter_cs;
-		wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0);
-	}
-#endif
-}
-
-static inline void native_swapgs(void)
-{
-#ifdef CONFIG_X86_64
-	asm volatile("swapgs" ::: "memory");
-#endif
-}
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define __cpuid			native_cpuid
-#define paravirt_enabled()	0
-
-/*
- * These special macros can be used to get or set a debugging register
- */
-#define get_debugreg(var, register)				\
-	(var) = native_get_debugreg(register)
-#define set_debugreg(value, register)				\
-	native_set_debugreg(register, value)
-
-static inline void load_sp0(struct tss_struct *tss,
-			    struct thread_struct *thread)
-{
-	native_load_sp0(tss, thread);
-}
-
-#define set_iopl_mask native_set_iopl_mask
-#endif /* CONFIG_PARAVIRT */
-
-/*
- * Save the cr4 feature set we're using (ie
- * Pentium 4MB enable and PPro Global page
- * enable), so that any CPU's that boot up
- * after us can get the correct flags.
- */
-extern unsigned long		mmu_cr4_features;
-
-static inline void set_in_cr4(unsigned long mask)
-{
-	unsigned cr4;
-
-	mmu_cr4_features |= mask;
-	cr4 = read_cr4();
-	cr4 |= mask;
-	write_cr4(cr4);
-}
-
-static inline void clear_in_cr4(unsigned long mask)
-{
-	unsigned cr4;
-
-	mmu_cr4_features &= ~mask;
-	cr4 = read_cr4();
-	cr4 &= ~mask;
-	write_cr4(cr4);
-}
-
-typedef struct {
-	unsigned long		seg;
-} mm_segment_t;
-
-
-/*
- * create a kernel thread without removing it from tasklists
- */
-extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
-/* Prepare to copy thread state - unlazy all lazy state */
-extern void prepare_to_copy(struct task_struct *tsk);
-
-unsigned long get_wchan(struct task_struct *p);
-
-/*
- * Generic CPUID function
- * clear %ecx since some cpus (Cyrix MII) do not set or clear %ecx
- * resulting in stale register contents being returned.
- */
-static inline void cpuid(unsigned int op,
-			 unsigned int *eax, unsigned int *ebx,
-			 unsigned int *ecx, unsigned int *edx)
-{
-	*eax = op;
-	*ecx = 0;
-	__cpuid(eax, ebx, ecx, edx);
-}
-
-/* Some CPUID calls want 'count' to be placed in ecx */
-static inline void cpuid_count(unsigned int op, int count,
-			       unsigned int *eax, unsigned int *ebx,
-			       unsigned int *ecx, unsigned int *edx)
-{
-	*eax = op;
-	*ecx = count;
-	__cpuid(eax, ebx, ecx, edx);
-}
-
-/*
- * CPUID functions returning a single datum
- */
-static inline unsigned int cpuid_eax(unsigned int op)
-{
-	unsigned int eax, ebx, ecx, edx;
-
-	cpuid(op, &eax, &ebx, &ecx, &edx);
-
-	return eax;
-}
-
-static inline unsigned int cpuid_ebx(unsigned int op)
-{
-	unsigned int eax, ebx, ecx, edx;
-
-	cpuid(op, &eax, &ebx, &ecx, &edx);
-
-	return ebx;
-}
-
-static inline unsigned int cpuid_ecx(unsigned int op)
-{
-	unsigned int eax, ebx, ecx, edx;
-
-	cpuid(op, &eax, &ebx, &ecx, &edx);
-
-	return ecx;
-}
-
-static inline unsigned int cpuid_edx(unsigned int op)
-{
-	unsigned int eax, ebx, ecx, edx;
-
-	cpuid(op, &eax, &ebx, &ecx, &edx);
-
-	return edx;
-}
-
-/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
-static inline void rep_nop(void)
-{
-	asm volatile("rep; nop" ::: "memory");
-}
-
-static inline void cpu_relax(void)
-{
-	rep_nop();
-}
-
-/* Stop speculative execution: */
-static inline void sync_core(void)
-{
-	int tmp;
-
-	asm volatile("cpuid" : "=a" (tmp) : "0" (1)
-		     : "ebx", "ecx", "edx", "memory");
-}
-
-static inline void __monitor(const void *eax, unsigned long ecx,
-			     unsigned long edx)
-{
-	/* "monitor %eax, %ecx, %edx;" */
-	asm volatile(".byte 0x0f, 0x01, 0xc8;"
-		     :: "a" (eax), "c" (ecx), "d"(edx));
-}
-
-static inline void __mwait(unsigned long eax, unsigned long ecx)
-{
-	/* "mwait %eax, %ecx;" */
-	asm volatile(".byte 0x0f, 0x01, 0xc9;"
-		     :: "a" (eax), "c" (ecx));
-}
-
-static inline void __sti_mwait(unsigned long eax, unsigned long ecx)
-{
-	trace_hardirqs_on();
-	/* "mwait %eax, %ecx;" */
-	asm volatile("sti; .byte 0x0f, 0x01, 0xc9;"
-		     :: "a" (eax), "c" (ecx));
-}
-
-extern void mwait_idle_with_hints(unsigned long eax, unsigned long ecx);
-
-extern void select_idle_routine(const struct cpuinfo_x86 *c);
-
-extern unsigned long		boot_option_idle_override;
-extern unsigned long		idle_halt;
-extern unsigned long		idle_nomwait;
-
-/*
- * on systems with caches, caches must be flashed as the absolute
- * last instruction before going into a suspended halt.  Otherwise,
- * dirty data can linger in the cache and become stale on resume,
- * leading to strange errors.
- *
- * perform a variety of operations to guarantee that the compiler
- * will not reorder instructions.  wbinvd itself is serializing
- * so the processor will not reorder.
- *
- * Systems without cache can just go into halt.
- */
-static inline void wbinvd_halt(void)
-{
-	mb();
-	/* check for clflush to determine if wbinvd is legal */
-	if (cpu_has_clflush)
-		asm volatile("cli; wbinvd; 1: hlt; jmp 1b" : : : "memory");
-	else
-		while (1)
-			halt();
-}
-
-extern void enable_sep_cpu(void);
-extern int sysenter_setup(void);
-
-/* Defined in head.S */
-extern struct desc_ptr		early_gdt_descr;
-
-extern void cpu_set_gdt(int);
-extern void switch_to_new_gdt(void);
-extern void cpu_init(void);
-extern void init_gdt(int cpu);
-
-static inline void update_debugctlmsr(unsigned long debugctlmsr)
-{
-#ifndef CONFIG_X86_DEBUGCTLMSR
-	if (boot_cpu_data.x86 < 6)
-		return;
-#endif
-	wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctlmsr);
-}
-
-/*
- * from system description table in BIOS. Mostly for MCA use, but
- * others may find it useful:
- */
-extern unsigned int		machine_id;
-extern unsigned int		machine_submodel_id;
-extern unsigned int		BIOS_revision;
-
-/* Boot loader type from the setup header: */
-extern int			bootloader_type;
-
-extern char			ignore_fpu_irq;
-
-#define HAVE_ARCH_PICK_MMAP_LAYOUT 1
-#define ARCH_HAS_PREFETCHW
-#define ARCH_HAS_SPINLOCK_PREFETCH
-
-#ifdef CONFIG_X86_32
-# define BASE_PREFETCH		ASM_NOP4
-# define ARCH_HAS_PREFETCH
-#else
-# define BASE_PREFETCH		"prefetcht0 (%1)"
-#endif
-
-/*
- * Prefetch instructions for Pentium III (+) and AMD Athlon (+)
- *
- * It's not worth to care about 3dnow prefetches for the K6
- * because they are microcoded there and very slow.
- */
-static inline void prefetch(const void *x)
-{
-	alternative_input(BASE_PREFETCH,
-			  "prefetchnta (%1)",
-			  X86_FEATURE_XMM,
-			  "r" (x));
-}
-
-/*
- * 3dnow prefetch to get an exclusive cache line.
- * Useful for spinlocks to avoid one state transition in the
- * cache coherency protocol:
- */
-static inline void prefetchw(const void *x)
-{
-	alternative_input(BASE_PREFETCH,
-			  "prefetchw (%1)",
-			  X86_FEATURE_3DNOW,
-			  "r" (x));
-}
-
-static inline void spin_lock_prefetch(const void *x)
-{
-	prefetchw(x);
-}
-
-#ifdef CONFIG_X86_32
-/*
- * User space process size: 3GB (default).
- */
-#define TASK_SIZE		PAGE_OFFSET
-#define STACK_TOP		TASK_SIZE
-#define STACK_TOP_MAX		STACK_TOP
-
-#define INIT_THREAD  {							  \
-	.sp0			= sizeof(init_stack) + (long)&init_stack, \
-	.vm86_info		= NULL,					  \
-	.sysenter_cs		= __KERNEL_CS,				  \
-	.io_bitmap_ptr		= NULL,					  \
-	.fs			= __KERNEL_PERCPU,			  \
-}
-
-/*
- * Note that the .io_bitmap member must be extra-big. This is because
- * the CPU will access an additional byte beyond the end of the IO
- * permission bitmap. The extra byte must be all 1 bits, and must
- * be within the limit.
- */
-#define INIT_TSS  {							  \
-	.x86_tss = {							  \
-		.sp0		= sizeof(init_stack) + (long)&init_stack, \
-		.ss0		= __KERNEL_DS,				  \
-		.ss1		= __KERNEL_CS,				  \
-		.io_bitmap_base	= INVALID_IO_BITMAP_OFFSET,		  \
-	 },								  \
-	.io_bitmap		= { [0 ... IO_BITMAP_LONGS] = ~0 },	  \
-}
-
-extern unsigned long thread_saved_pc(struct task_struct *tsk);
-
-#define THREAD_SIZE_LONGS      (THREAD_SIZE/sizeof(unsigned long))
-#define KSTK_TOP(info)                                                 \
-({                                                                     \
-       unsigned long *__ptr = (unsigned long *)(info);                 \
-       (unsigned long)(&__ptr[THREAD_SIZE_LONGS]);                     \
-})
-
-/*
- * The below -8 is to reserve 8 bytes on top of the ring0 stack.
- * This is necessary to guarantee that the entire "struct pt_regs"
- * is accessable even if the CPU haven't stored the SS/ESP registers
- * on the stack (interrupt gate does not save these registers
- * when switching to the same priv ring).
- * Therefore beware: accessing the ss/esp fields of the
- * "struct pt_regs" is possible, but they may contain the
- * completely wrong values.
- */
-#define task_pt_regs(task)                                             \
-({                                                                     \
-       struct pt_regs *__regs__;                                       \
-       __regs__ = (struct pt_regs *)(KSTK_TOP(task_stack_page(task))-8); \
-       __regs__ - 1;                                                   \
-})
-
-#define KSTK_ESP(task)		(task_pt_regs(task)->sp)
-
-#else
-/*
- * User space process size. 47bits minus one guard page.
- */
-#define TASK_SIZE64	((1UL << 47) - PAGE_SIZE)
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define IA32_PAGE_OFFSET	((current->personality & ADDR_LIMIT_3GB) ? \
-					0xc0000000 : 0xFFFFe000)
-
-#define TASK_SIZE		(test_thread_flag(TIF_IA32) ? \
-					IA32_PAGE_OFFSET : TASK_SIZE64)
-#define TASK_SIZE_OF(child)	((test_tsk_thread_flag(child, TIF_IA32)) ? \
-					IA32_PAGE_OFFSET : TASK_SIZE64)
-
-#define STACK_TOP		TASK_SIZE
-#define STACK_TOP_MAX		TASK_SIZE64
-
-#define INIT_THREAD  { \
-	.sp0 = (unsigned long)&init_stack + sizeof(init_stack) \
-}
-
-#define INIT_TSS  { \
-	.x86_tss.sp0 = (unsigned long)&init_stack + sizeof(init_stack) \
-}
-
-/*
- * Return saved PC of a blocked thread.
- * What is this good for? it will be always the scheduler or ret_from_fork.
- */
-#define thread_saved_pc(t)	(*(unsigned long *)((t)->thread.sp - 8))
-
-#define task_pt_regs(tsk)	((struct pt_regs *)(tsk)->thread.sp0 - 1)
-#define KSTK_ESP(tsk)		-1 /* sorry. doesn't work for syscall. */
-#endif /* CONFIG_X86_64 */
-
-extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
-					       unsigned long new_sp);
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 3))
-
-#define KSTK_EIP(task)		(task_pt_regs(task)->ip)
-
-/* Get/set a process' ability to use the timestamp counter instruction */
-#define GET_TSC_CTL(adr)	get_tsc_mode((adr))
-#define SET_TSC_CTL(val)	set_tsc_mode((val))
-
-extern int get_tsc_mode(unsigned long adr);
-extern int set_tsc_mode(unsigned int val);
-
-#endif /* ASM_X86__PROCESSOR_H */
diff --git a/include/asm-x86/proto.h b/include/asm-x86/proto.h
deleted file mode 100644
index 6e89e8b..0000000
--- a/include/asm-x86/proto.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef ASM_X86__PROTO_H
-#define ASM_X86__PROTO_H
-
-#include <asm/ldt.h>
-
-/* misc architecture specific prototypes */
-
-extern void early_idt_handler(void);
-
-extern void system_call(void);
-extern void syscall_init(void);
-
-extern void ia32_syscall(void);
-extern void ia32_cstar_target(void);
-extern void ia32_sysenter_target(void);
-
-extern void syscall32_cpu_init(void);
-
-extern void check_efer(void);
-
-#ifdef CONFIG_X86_BIOS_REBOOT
-extern int reboot_force;
-#else
-static const int reboot_force = 0;
-#endif
-
-long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
-
-#define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1))
-#define round_down(x, y) ((x) & ~((y) - 1))
-
-#endif /* ASM_X86__PROTO_H */
diff --git a/include/asm-x86/ptrace-abi.h b/include/asm-x86/ptrace-abi.h
deleted file mode 100644
index 4298b88..0000000
--- a/include/asm-x86/ptrace-abi.h
+++ /dev/null
@@ -1,145 +0,0 @@
-#ifndef ASM_X86__PTRACE_ABI_H
-#define ASM_X86__PTRACE_ABI_H
-
-#ifdef __i386__
-
-#define EBX 0
-#define ECX 1
-#define EDX 2
-#define ESI 3
-#define EDI 4
-#define EBP 5
-#define EAX 6
-#define DS 7
-#define ES 8
-#define FS 9
-#define GS 10
-#define ORIG_EAX 11
-#define EIP 12
-#define CS  13
-#define EFL 14
-#define UESP 15
-#define SS   16
-#define FRAME_SIZE 17
-
-#else /* __i386__ */
-
-#if defined(__ASSEMBLY__) || defined(__FRAME_OFFSETS)
-#define R15 0
-#define R14 8
-#define R13 16
-#define R12 24
-#define RBP 32
-#define RBX 40
-/* arguments: interrupts/non tracing syscalls only save upto here*/
-#define R11 48
-#define R10 56
-#define R9 64
-#define R8 72
-#define RAX 80
-#define RCX 88
-#define RDX 96
-#define RSI 104
-#define RDI 112
-#define ORIG_RAX 120       /* = ERROR */
-/* end of arguments */
-/* cpu exception frame or undefined in case of fast syscall. */
-#define RIP 128
-#define CS 136
-#define EFLAGS 144
-#define RSP 152
-#define SS 160
-#define ARGOFFSET R11
-#endif /* __ASSEMBLY__ */
-
-/* top of stack page */
-#define FRAME_SIZE 168
-
-#endif /* !__i386__ */
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-#define PTRACE_GETFPXREGS         18
-#define PTRACE_SETFPXREGS         19
-
-#define PTRACE_OLDSETOPTIONS      21
-
-/* only useful for access 32bit programs / kernels */
-#define PTRACE_GET_THREAD_AREA    25
-#define PTRACE_SET_THREAD_AREA    26
-
-#ifdef __x86_64__
-# define PTRACE_ARCH_PRCTL	  30
-#endif
-
-#define PTRACE_SYSEMU		  31
-#define PTRACE_SYSEMU_SINGLESTEP  32
-
-#define PTRACE_SINGLEBLOCK	33	/* resume execution until next branch */
-
-#ifdef CONFIG_X86_PTRACE_BTS
-
-#ifndef __ASSEMBLY__
-#include <asm/types.h>
-
-/* configuration/status structure used in PTRACE_BTS_CONFIG and
-   PTRACE_BTS_STATUS commands.
-*/
-struct ptrace_bts_config {
-	/* requested or actual size of BTS buffer in bytes */
-	__u32 size;
-	/* bitmask of below flags */
-	__u32 flags;
-	/* buffer overflow signal */
-	__u32 signal;
-	/* actual size of bts_struct in bytes */
-	__u32 bts_size;
-};
-#endif /* __ASSEMBLY__ */
-
-#define PTRACE_BTS_O_TRACE	0x1 /* branch trace */
-#define PTRACE_BTS_O_SCHED	0x2 /* scheduling events w/ jiffies */
-#define PTRACE_BTS_O_SIGNAL     0x4 /* send SIG<signal> on buffer overflow
-				       instead of wrapping around */
-#define PTRACE_BTS_O_ALLOC	0x8 /* (re)allocate buffer */
-
-#define PTRACE_BTS_CONFIG	40
-/* Configure branch trace recording.
-   ADDR points to a struct ptrace_bts_config.
-   DATA gives the size of that buffer.
-   A new buffer is allocated, if requested in the flags.
-   An overflow signal may only be requested for new buffers.
-   Returns the number of bytes read.
-*/
-#define PTRACE_BTS_STATUS	41
-/* Return the current configuration in a struct ptrace_bts_config
-   pointed to by ADDR; DATA gives the size of that buffer.
-   Returns the number of bytes written.
-*/
-#define PTRACE_BTS_SIZE		42
-/* Return the number of available BTS records for draining.
-   DATA and ADDR are ignored.
-*/
-#define PTRACE_BTS_GET		43
-/* Get a single BTS record.
-   DATA defines the index into the BTS array, where 0 is the newest
-   entry, and higher indices refer to older entries.
-   ADDR is pointing to struct bts_struct (see asm/ds.h).
-*/
-#define PTRACE_BTS_CLEAR	44
-/* Clear the BTS buffer.
-   DATA and ADDR are ignored.
-*/
-#define PTRACE_BTS_DRAIN	45
-/* Read all available BTS records and clear the buffer.
-   ADDR points to an array of struct bts_struct.
-   DATA gives the size of that buffer.
-   BTS records are read from oldest to newest.
-   Returns number of BTS records drained.
-*/
-#endif /* CONFIG_X86_PTRACE_BTS */
-
-#endif /* ASM_X86__PTRACE_ABI_H */
diff --git a/include/asm-x86/ptrace.h b/include/asm-x86/ptrace.h
deleted file mode 100644
index a202552..0000000
--- a/include/asm-x86/ptrace.h
+++ /dev/null
@@ -1,280 +0,0 @@
-#ifndef ASM_X86__PTRACE_H
-#define ASM_X86__PTRACE_H
-
-#include <linux/compiler.h>	/* For __user */
-#include <asm/ptrace-abi.h>
-#include <asm/processor-flags.h>
-
-#ifdef __KERNEL__
-#include <asm/ds.h>		/* the DS BTS struct is used for ptrace too */
-#include <asm/segment.h>
-#endif
-
-#ifndef __ASSEMBLY__
-
-#ifdef __i386__
-/* this struct defines the way the registers are stored on the
-   stack during a system call. */
-
-#ifndef __KERNEL__
-
-struct pt_regs {
-	long ebx;
-	long ecx;
-	long edx;
-	long esi;
-	long edi;
-	long ebp;
-	long eax;
-	int  xds;
-	int  xes;
-	int  xfs;
-	/* int  gs; */
-	long orig_eax;
-	long eip;
-	int  xcs;
-	long eflags;
-	long esp;
-	int  xss;
-};
-
-#else /* __KERNEL__ */
-
-struct pt_regs {
-	unsigned long bx;
-	unsigned long cx;
-	unsigned long dx;
-	unsigned long si;
-	unsigned long di;
-	unsigned long bp;
-	unsigned long ax;
-	unsigned long ds;
-	unsigned long es;
-	unsigned long fs;
-	/* int  gs; */
-	unsigned long orig_ax;
-	unsigned long ip;
-	unsigned long cs;
-	unsigned long flags;
-	unsigned long sp;
-	unsigned long ss;
-};
-
-#endif /* __KERNEL__ */
-
-#else /* __i386__ */
-
-#ifndef __KERNEL__
-
-struct pt_regs {
-	unsigned long r15;
-	unsigned long r14;
-	unsigned long r13;
-	unsigned long r12;
-	unsigned long rbp;
-	unsigned long rbx;
-/* arguments: non interrupts/non tracing syscalls only save upto here*/
-	unsigned long r11;
-	unsigned long r10;
-	unsigned long r9;
-	unsigned long r8;
-	unsigned long rax;
-	unsigned long rcx;
-	unsigned long rdx;
-	unsigned long rsi;
-	unsigned long rdi;
-	unsigned long orig_rax;
-/* end of arguments */
-/* cpu exception frame or undefined */
-	unsigned long rip;
-	unsigned long cs;
-	unsigned long eflags;
-	unsigned long rsp;
-	unsigned long ss;
-/* top of stack page */
-};
-
-#else /* __KERNEL__ */
-
-struct pt_regs {
-	unsigned long r15;
-	unsigned long r14;
-	unsigned long r13;
-	unsigned long r12;
-	unsigned long bp;
-	unsigned long bx;
-/* arguments: non interrupts/non tracing syscalls only save upto here*/
-	unsigned long r11;
-	unsigned long r10;
-	unsigned long r9;
-	unsigned long r8;
-	unsigned long ax;
-	unsigned long cx;
-	unsigned long dx;
-	unsigned long si;
-	unsigned long di;
-	unsigned long orig_ax;
-/* end of arguments */
-/* cpu exception frame or undefined */
-	unsigned long ip;
-	unsigned long cs;
-	unsigned long flags;
-	unsigned long sp;
-	unsigned long ss;
-/* top of stack page */
-};
-
-#endif /* __KERNEL__ */
-#endif /* !__i386__ */
-
-
-#ifdef CONFIG_X86_PTRACE_BTS
-/* a branch trace record entry
- *
- * In order to unify the interface between various processor versions,
- * we use the below data structure for all processors.
- */
-enum bts_qualifier {
-	BTS_INVALID = 0,
-	BTS_BRANCH,
-	BTS_TASK_ARRIVES,
-	BTS_TASK_DEPARTS
-};
-
-struct bts_struct {
-	__u64 qualifier;
-	union {
-		/* BTS_BRANCH */
-		struct {
-			__u64 from_ip;
-			__u64 to_ip;
-		} lbr;
-		/* BTS_TASK_ARRIVES or
-		   BTS_TASK_DEPARTS */
-		__u64 jiffies;
-	} variant;
-};
-#endif /* CONFIG_X86_PTRACE_BTS */
-
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-
-struct cpuinfo_x86;
-struct task_struct;
-
-#ifdef CONFIG_X86_PTRACE_BTS
-extern void __cpuinit ptrace_bts_init_intel(struct cpuinfo_x86 *);
-extern void ptrace_bts_take_timestamp(struct task_struct *, enum bts_qualifier);
-#else
-#define ptrace_bts_init_intel(config) do {} while (0)
-#endif /* CONFIG_X86_PTRACE_BTS */
-
-extern unsigned long profile_pc(struct pt_regs *regs);
-
-extern unsigned long
-convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs);
-extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs,
-			 int error_code, int si_code);
-void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
-
-extern long syscall_trace_enter(struct pt_regs *);
-extern void syscall_trace_leave(struct pt_regs *);
-
-static inline unsigned long regs_return_value(struct pt_regs *regs)
-{
-	return regs->ax;
-}
-
-/*
- * user_mode_vm(regs) determines whether a register set came from user mode.
- * This is true if V8086 mode was enabled OR if the register set was from
- * protected mode with RPL-3 CS value.  This tricky test checks that with
- * one comparison.  Many places in the kernel can bypass this full check
- * if they have already ruled out V8086 mode, so user_mode(regs) can be used.
- */
-static inline int user_mode(struct pt_regs *regs)
-{
-#ifdef CONFIG_X86_32
-	return (regs->cs & SEGMENT_RPL_MASK) == USER_RPL;
-#else
-	return !!(regs->cs & 3);
-#endif
-}
-
-static inline int user_mode_vm(struct pt_regs *regs)
-{
-#ifdef CONFIG_X86_32
-	return ((regs->cs & SEGMENT_RPL_MASK) | (regs->flags & X86_VM_MASK)) >=
-		USER_RPL;
-#else
-	return user_mode(regs);
-#endif
-}
-
-static inline int v8086_mode(struct pt_regs *regs)
-{
-#ifdef CONFIG_X86_32
-	return (regs->flags & X86_VM_MASK);
-#else
-	return 0;	/* No V86 mode support in long mode */
-#endif
-}
-
-/*
- * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
- * when it traps.  So regs will be the current sp.
- *
- * This is valid only for kernel mode traps.
- */
-static inline unsigned long kernel_trap_sp(struct pt_regs *regs)
-{
-#ifdef CONFIG_X86_32
-	return (unsigned long)regs;
-#else
-	return regs->sp;
-#endif
-}
-
-static inline unsigned long instruction_pointer(struct pt_regs *regs)
-{
-	return regs->ip;
-}
-
-static inline unsigned long frame_pointer(struct pt_regs *regs)
-{
-	return regs->bp;
-}
-
-static inline unsigned long user_stack_pointer(struct pt_regs *regs)
-{
-	return regs->sp;
-}
-
-/*
- * These are defined as per linux/ptrace.h, which see.
- */
-#define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
-
-extern void user_enable_block_step(struct task_struct *);
-#ifdef CONFIG_X86_DEBUGCTLMSR
-#define arch_has_block_step()	(1)
-#else
-#define arch_has_block_step()	(boot_cpu_data.x86 >= 6)
-#endif
-
-struct user_desc;
-extern int do_get_thread_area(struct task_struct *p, int idx,
-			      struct user_desc __user *info);
-extern int do_set_thread_area(struct task_struct *p, int idx,
-			      struct user_desc __user *info, int can_allocate);
-
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
-#endif /* __KERNEL__ */
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* ASM_X86__PTRACE_H */
diff --git a/include/asm-x86/pvclock-abi.h b/include/asm-x86/pvclock-abi.h
deleted file mode 100644
index edb3b4e..0000000
--- a/include/asm-x86/pvclock-abi.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef ASM_X86__PVCLOCK_ABI_H
-#define ASM_X86__PVCLOCK_ABI_H
-#ifndef __ASSEMBLY__
-
-/*
- * These structs MUST NOT be changed.
- * They are the ABI between hypervisor and guest OS.
- * Both Xen and KVM are using this.
- *
- * pvclock_vcpu_time_info holds the system time and the tsc timestamp
- * of the last update. So the guest can use the tsc delta to get a
- * more precise system time.  There is one per virtual cpu.
- *
- * pvclock_wall_clock references the point in time when the system
- * time was zero (usually boot time), thus the guest calculates the
- * current wall clock by adding the system time.
- *
- * Protocol for the "version" fields is: hypervisor raises it (making
- * it uneven) before it starts updating the fields and raises it again
- * (making it even) when it is done.  Thus the guest can make sure the
- * time values it got are consistent by checking the version before
- * and after reading them.
- */
-
-struct pvclock_vcpu_time_info {
-	u32   version;
-	u32   pad0;
-	u64   tsc_timestamp;
-	u64   system_time;
-	u32   tsc_to_system_mul;
-	s8    tsc_shift;
-	u8    pad[3];
-} __attribute__((__packed__)); /* 32 bytes */
-
-struct pvclock_wall_clock {
-	u32   version;
-	u32   sec;
-	u32   nsec;
-} __attribute__((__packed__));
-
-#endif /* __ASSEMBLY__ */
-#endif /* ASM_X86__PVCLOCK_ABI_H */
diff --git a/include/asm-x86/pvclock.h b/include/asm-x86/pvclock.h
deleted file mode 100644
index ad29e27..0000000
--- a/include/asm-x86/pvclock.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef ASM_X86__PVCLOCK_H
-#define ASM_X86__PVCLOCK_H
-
-#include <linux/clocksource.h>
-#include <asm/pvclock-abi.h>
-
-/* some helper functions for xen and kvm pv clock sources */
-cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src);
-unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src);
-void pvclock_read_wallclock(struct pvclock_wall_clock *wall,
-			    struct pvclock_vcpu_time_info *vcpu,
-			    struct timespec *ts);
-
-#endif /* ASM_X86__PVCLOCK_H */
diff --git a/include/asm-x86/reboot.h b/include/asm-x86/reboot.h
deleted file mode 100644
index 1c2f0ce..0000000
--- a/include/asm-x86/reboot.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef ASM_X86__REBOOT_H
-#define ASM_X86__REBOOT_H
-
-struct pt_regs;
-
-struct machine_ops {
-	void (*restart)(char *cmd);
-	void (*halt)(void);
-	void (*power_off)(void);
-	void (*shutdown)(void);
-	void (*crash_shutdown)(struct pt_regs *);
-	void (*emergency_restart)(void);
-};
-
-extern struct machine_ops machine_ops;
-
-void native_machine_crash_shutdown(struct pt_regs *regs);
-void native_machine_shutdown(void);
-void machine_real_restart(const unsigned char *code, int length);
-
-#endif /* ASM_X86__REBOOT_H */
diff --git a/include/asm-x86/reboot_fixups.h b/include/asm-x86/reboot_fixups.h
deleted file mode 100644
index 2c2987d..0000000
--- a/include/asm-x86/reboot_fixups.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef ASM_X86__REBOOT_FIXUPS_H
-#define ASM_X86__REBOOT_FIXUPS_H
-
-extern void mach_reboot_fixups(void);
-
-#endif /* ASM_X86__REBOOT_FIXUPS_H */
diff --git a/include/asm-x86/required-features.h b/include/asm-x86/required-features.h
deleted file mode 100644
index a01c4e37..0000000
--- a/include/asm-x86/required-features.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef ASM_X86__REQUIRED_FEATURES_H
-#define ASM_X86__REQUIRED_FEATURES_H
-
-/* Define minimum CPUID feature set for kernel These bits are checked
-   really early to actually display a visible error message before the
-   kernel dies.  Make sure to assign features to the proper mask!
-
-   Some requirements that are not in CPUID yet are also in the
-   CONFIG_X86_MINIMUM_CPU_FAMILY which is checked too.
-
-   The real information is in arch/x86/Kconfig.cpu, this just converts
-   the CONFIGs into a bitmask */
-
-#ifndef CONFIG_MATH_EMULATION
-# define NEED_FPU	(1<<(X86_FEATURE_FPU & 31))
-#else
-# define NEED_FPU	0
-#endif
-
-#if defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64)
-# define NEED_PAE	(1<<(X86_FEATURE_PAE & 31))
-#else
-# define NEED_PAE	0
-#endif
-
-#ifdef CONFIG_X86_CMPXCHG64
-# define NEED_CX8	(1<<(X86_FEATURE_CX8 & 31))
-#else
-# define NEED_CX8	0
-#endif
-
-#if defined(CONFIG_X86_CMOV) || defined(CONFIG_X86_64)
-# define NEED_CMOV	(1<<(X86_FEATURE_CMOV & 31))
-#else
-# define NEED_CMOV	0
-#endif
-
-#ifdef CONFIG_X86_USE_3DNOW
-# define NEED_3DNOW	(1<<(X86_FEATURE_3DNOW & 31))
-#else
-# define NEED_3DNOW	0
-#endif
-
-#if defined(CONFIG_X86_P6_NOP) || defined(CONFIG_X86_64)
-# define NEED_NOPL	(1<<(X86_FEATURE_NOPL & 31))
-#else
-# define NEED_NOPL	0
-#endif
-
-#ifdef CONFIG_X86_64
-#define NEED_PSE	0
-#define NEED_MSR	(1<<(X86_FEATURE_MSR & 31))
-#define NEED_PGE	(1<<(X86_FEATURE_PGE & 31))
-#define NEED_FXSR	(1<<(X86_FEATURE_FXSR & 31))
-#define NEED_XMM	(1<<(X86_FEATURE_XMM & 31))
-#define NEED_XMM2	(1<<(X86_FEATURE_XMM2 & 31))
-#define NEED_LM		(1<<(X86_FEATURE_LM & 31))
-#else
-#define NEED_PSE	0
-#define NEED_MSR	0
-#define NEED_PGE	0
-#define NEED_FXSR	0
-#define NEED_XMM	0
-#define NEED_XMM2	0
-#define NEED_LM		0
-#endif
-
-#define REQUIRED_MASK0	(NEED_FPU|NEED_PSE|NEED_MSR|NEED_PAE|\
-			 NEED_CX8|NEED_PGE|NEED_FXSR|NEED_CMOV|\
-			 NEED_XMM|NEED_XMM2)
-#define SSE_MASK	(NEED_XMM|NEED_XMM2)
-
-#define REQUIRED_MASK1	(NEED_LM|NEED_3DNOW)
-
-#define REQUIRED_MASK2	0
-#define REQUIRED_MASK3	(NEED_NOPL)
-#define REQUIRED_MASK4	0
-#define REQUIRED_MASK5	0
-#define REQUIRED_MASK6	0
-#define REQUIRED_MASK7	0
-
-#endif /* ASM_X86__REQUIRED_FEATURES_H */
diff --git a/include/asm-x86/resume-trace.h b/include/asm-x86/resume-trace.h
deleted file mode 100644
index e39376d..0000000
--- a/include/asm-x86/resume-trace.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef ASM_X86__RESUME_TRACE_H
-#define ASM_X86__RESUME_TRACE_H
-
-#include <asm/asm.h>
-
-#define TRACE_RESUME(user)					\
-do {								\
-	if (pm_trace_enabled) {					\
-		const void *tracedata;				\
-		asm volatile(_ASM_MOV " $1f,%0\n"		\
-			     ".section .tracedata,\"a\"\n"	\
-			     "1:\t.word %c1\n\t"		\
-			     _ASM_PTR " %c2\n"			\
-			     ".previous"			\
-			     :"=r" (tracedata)			\
-			     : "i" (__LINE__), "i" (__FILE__));	\
-		generate_resume_trace(tracedata, user);		\
-	}							\
-} while (0)
-
-#endif /* ASM_X86__RESUME_TRACE_H */
diff --git a/include/asm-x86/rio.h b/include/asm-x86/rio.h
deleted file mode 100644
index 5e1256b..0000000
--- a/include/asm-x86/rio.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Derived from include/asm-x86/mach-summit/mach_mpparse.h
- *          and include/asm-x86/mach-default/bios_ebda.h
- *
- * Author: Laurent Vivier <Laurent.Vivier@bull.net>
- */
-
-#ifndef ASM_X86__RIO_H
-#define ASM_X86__RIO_H
-
-#define RIO_TABLE_VERSION	3
-
-struct rio_table_hdr {
-	u8 version;		/* Version number of this data structure  */
-	u8 num_scal_dev;	/* # of Scalability devices               */
-	u8 num_rio_dev;		/* # of RIO I/O devices                   */
-} __attribute__((packed));
-
-struct scal_detail {
-	u8 node_id;		/* Scalability Node ID                    */
-	u32 CBAR;		/* Address of 1MB register space          */
-	u8 port0node;		/* Node ID port connected to: 0xFF=None   */
-	u8 port0port;		/* Port num port connected to: 0,1,2, or  */
-				/* 0xFF=None                              */
-	u8 port1node;		/* Node ID port connected to: 0xFF = None */
-	u8 port1port;		/* Port num port connected to: 0,1,2, or  */
-				/* 0xFF=None                              */
-	u8 port2node;		/* Node ID port connected to: 0xFF = None */
-	u8 port2port;		/* Port num port connected to: 0,1,2, or  */
-				/* 0xFF=None                              */
-	u8 chassis_num;		/* 1 based Chassis number (1 = boot node) */
-} __attribute__((packed));
-
-struct rio_detail {
-	u8 node_id;		/* RIO Node ID                            */
-	u32 BBAR;		/* Address of 1MB register space          */
-	u8 type;		/* Type of device                         */
-	u8 owner_id;		/* Node ID of Hurricane that owns this    */
-				/* node                                   */
-	u8 port0node;		/* Node ID port connected to: 0xFF=None   */
-	u8 port0port;		/* Port num port connected to: 0,1,2, or  */
-				/* 0xFF=None                              */
-	u8 port1node;		/* Node ID port connected to: 0xFF=None   */
-	u8 port1port;		/* Port num port connected to: 0,1,2, or  */
-				/* 0xFF=None                              */
-	u8 first_slot;		/* Lowest slot number below this Calgary  */
-	u8 status;		/* Bit 0 = 1 : the XAPIC is used          */
-				/*       = 0 : the XAPIC is not used, ie: */
-				/*            ints fwded to another XAPIC */
-				/*           Bits1:7 Reserved             */
-	u8 WP_index;		/* instance index - lower ones have       */
-				/*     lower slot numbers/PCI bus numbers */
-	u8 chassis_num;		/* 1 based Chassis number                 */
-} __attribute__((packed));
-
-enum {
-	HURR_SCALABILTY	= 0,	/* Hurricane Scalability info */
-	HURR_RIOIB	= 2,	/* Hurricane RIOIB info       */
-	COMPAT_CALGARY	= 4,	/* Compatibility Calgary      */
-	ALT_CALGARY	= 5,	/* Second Planar Calgary      */
-};
-
-#endif /* ASM_X86__RIO_H */
diff --git a/include/asm-x86/rwlock.h b/include/asm-x86/rwlock.h
deleted file mode 100644
index 48a3109..0000000
--- a/include/asm-x86/rwlock.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ASM_X86__RWLOCK_H
-#define ASM_X86__RWLOCK_H
-
-#define RW_LOCK_BIAS		 0x01000000
-
-/* Actual code is in asm/spinlock.h or in arch/x86/lib/rwlock.S */
-
-#endif /* ASM_X86__RWLOCK_H */
diff --git a/include/asm-x86/rwsem.h b/include/asm-x86/rwsem.h
deleted file mode 100644
index 3ff3015..0000000
--- a/include/asm-x86/rwsem.h
+++ /dev/null
@@ -1,265 +0,0 @@
-/* rwsem.h: R/W semaphores implemented using XADD/CMPXCHG for i486+
- *
- * Written by David Howells (dhowells@redhat.com).
- *
- * Derived from asm-x86/semaphore.h
- *
- *
- * The MSW of the count is the negated number of active writers and waiting
- * lockers, and the LSW is the total number of active locks
- *
- * The lock count is initialized to 0 (no active and no waiting lockers).
- *
- * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case of an
- * uncontended lock. This can be determined because XADD returns the old value.
- * Readers increment by 1 and see a positive value when uncontended, negative
- * if there are writers (and maybe) readers waiting (in which case it goes to
- * sleep).
- *
- * The value of WAITING_BIAS supports up to 32766 waiting processes. This can
- * be extended to 65534 by manually checking the whole MSW rather than relying
- * on the S flag.
- *
- * The value of ACTIVE_BIAS supports up to 65535 active processes.
- *
- * This should be totally fair - if anything is waiting, a process that wants a
- * lock will go to the back of the queue. When the currently active lock is
- * released, if there's a writer at the front of the queue, then that and only
- * that will be woken up; if there's a bunch of consequtive readers at the
- * front, then they'll all be woken up, but no other readers will be.
- */
-
-#ifndef ASM_X86__RWSEM_H
-#define ASM_X86__RWSEM_H
-
-#ifndef _LINUX_RWSEM_H
-#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
-#endif
-
-#ifdef __KERNEL__
-
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/lockdep.h>
-
-struct rwsem_waiter;
-
-extern asmregparm struct rw_semaphore *
- rwsem_down_read_failed(struct rw_semaphore *sem);
-extern asmregparm struct rw_semaphore *
- rwsem_down_write_failed(struct rw_semaphore *sem);
-extern asmregparm struct rw_semaphore *
- rwsem_wake(struct rw_semaphore *);
-extern asmregparm struct rw_semaphore *
- rwsem_downgrade_wake(struct rw_semaphore *sem);
-
-/*
- * the semaphore definition
- */
-
-#define RWSEM_UNLOCKED_VALUE		0x00000000
-#define RWSEM_ACTIVE_BIAS		0x00000001
-#define RWSEM_ACTIVE_MASK		0x0000ffff
-#define RWSEM_WAITING_BIAS		(-0x00010000)
-#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
-#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-
-struct rw_semaphore {
-	signed long		count;
-	spinlock_t		wait_lock;
-	struct list_head	wait_list;
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	struct lockdep_map dep_map;
-#endif
-};
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
-#else
-# define __RWSEM_DEP_MAP_INIT(lockname)
-#endif
-
-
-#define __RWSEM_INITIALIZER(name)				\
-{								\
-	RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
-	LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) \
-}
-
-#define DECLARE_RWSEM(name)					\
-	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
-
-extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
-			 struct lock_class_key *key);
-
-#define init_rwsem(sem)						\
-do {								\
-	static struct lock_class_key __key;			\
-								\
-	__init_rwsem((sem), #sem, &__key);			\
-} while (0)
-
-/*
- * lock for reading
- */
-static inline void __down_read(struct rw_semaphore *sem)
-{
-	asm volatile("# beginning down_read\n\t"
-		     LOCK_PREFIX "  incl      (%%eax)\n\t"
-		     /* adds 0x00000001, returns the old value */
-		     "  jns        1f\n"
-		     "  call call_rwsem_down_read_failed\n"
-		     "1:\n\t"
-		     "# ending down_read\n\t"
-		     : "+m" (sem->count)
-		     : "a" (sem)
-		     : "memory", "cc");
-}
-
-/*
- * trylock for reading -- returns 1 if successful, 0 if contention
- */
-static inline int __down_read_trylock(struct rw_semaphore *sem)
-{
-	__s32 result, tmp;
-	asm volatile("# beginning __down_read_trylock\n\t"
-		     "  movl      %0,%1\n\t"
-		     "1:\n\t"
-		     "  movl	     %1,%2\n\t"
-		     "  addl      %3,%2\n\t"
-		     "  jle	     2f\n\t"
-		     LOCK_PREFIX "  cmpxchgl  %2,%0\n\t"
-		     "  jnz	     1b\n\t"
-		     "2:\n\t"
-		     "# ending __down_read_trylock\n\t"
-		     : "+m" (sem->count), "=&a" (result), "=&r" (tmp)
-		     : "i" (RWSEM_ACTIVE_READ_BIAS)
-		     : "memory", "cc");
-	return result >= 0 ? 1 : 0;
-}
-
-/*
- * lock for writing
- */
-static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
-{
-	int tmp;
-
-	tmp = RWSEM_ACTIVE_WRITE_BIAS;
-	asm volatile("# beginning down_write\n\t"
-		     LOCK_PREFIX "  xadd      %%edx,(%%eax)\n\t"
-		     /* subtract 0x0000ffff, returns the old value */
-		     "  testl     %%edx,%%edx\n\t"
-		     /* was the count 0 before? */
-		     "  jz        1f\n"
-		     "  call call_rwsem_down_write_failed\n"
-		     "1:\n"
-		     "# ending down_write"
-		     : "+m" (sem->count), "=d" (tmp)
-		     : "a" (sem), "1" (tmp)
-		     : "memory", "cc");
-}
-
-static inline void __down_write(struct rw_semaphore *sem)
-{
-	__down_write_nested(sem, 0);
-}
-
-/*
- * trylock for writing -- returns 1 if successful, 0 if contention
- */
-static inline int __down_write_trylock(struct rw_semaphore *sem)
-{
-	signed long ret = cmpxchg(&sem->count,
-				  RWSEM_UNLOCKED_VALUE,
-				  RWSEM_ACTIVE_WRITE_BIAS);
-	if (ret == RWSEM_UNLOCKED_VALUE)
-		return 1;
-	return 0;
-}
-
-/*
- * unlock after reading
- */
-static inline void __up_read(struct rw_semaphore *sem)
-{
-	__s32 tmp = -RWSEM_ACTIVE_READ_BIAS;
-	asm volatile("# beginning __up_read\n\t"
-		     LOCK_PREFIX "  xadd      %%edx,(%%eax)\n\t"
-		     /* subtracts 1, returns the old value */
-		     "  jns        1f\n\t"
-		     "  call call_rwsem_wake\n"
-		     "1:\n"
-		     "# ending __up_read\n"
-		     : "+m" (sem->count), "=d" (tmp)
-		     : "a" (sem), "1" (tmp)
-		     : "memory", "cc");
-}
-
-/*
- * unlock after writing
- */
-static inline void __up_write(struct rw_semaphore *sem)
-{
-	asm volatile("# beginning __up_write\n\t"
-		     "  movl      %2,%%edx\n\t"
-		     LOCK_PREFIX "  xaddl     %%edx,(%%eax)\n\t"
-		     /* tries to transition
-			0xffff0001 -> 0x00000000 */
-		     "  jz       1f\n"
-		     "  call call_rwsem_wake\n"
-		     "1:\n\t"
-		     "# ending __up_write\n"
-		     : "+m" (sem->count)
-		     : "a" (sem), "i" (-RWSEM_ACTIVE_WRITE_BIAS)
-		     : "memory", "cc", "edx");
-}
-
-/*
- * downgrade write lock to read lock
- */
-static inline void __downgrade_write(struct rw_semaphore *sem)
-{
-	asm volatile("# beginning __downgrade_write\n\t"
-		     LOCK_PREFIX "  addl      %2,(%%eax)\n\t"
-		     /* transitions 0xZZZZ0001 -> 0xYYYY0001 */
-		     "  jns       1f\n\t"
-		     "  call call_rwsem_downgrade_wake\n"
-		     "1:\n\t"
-		     "# ending __downgrade_write\n"
-		     : "+m" (sem->count)
-		     : "a" (sem), "i" (-RWSEM_WAITING_BIAS)
-		     : "memory", "cc");
-}
-
-/*
- * implement atomic add functionality
- */
-static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
-{
-	asm volatile(LOCK_PREFIX "addl %1,%0"
-		     : "+m" (sem->count)
-		     : "ir" (delta));
-}
-
-/*
- * implement exchange and add functionality
- */
-static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
-{
-	int tmp = delta;
-
-	asm volatile(LOCK_PREFIX "xadd %0,%1"
-		     : "+r" (tmp), "+m" (sem->count)
-		     : : "memory");
-
-	return tmp + delta;
-}
-
-static inline int rwsem_is_locked(struct rw_semaphore *sem)
-{
-	return (sem->count != 0);
-}
-
-#endif /* __KERNEL__ */
-#endif /* ASM_X86__RWSEM_H */
diff --git a/include/asm-x86/scatterlist.h b/include/asm-x86/scatterlist.h
deleted file mode 100644
index ee48f88..0000000
--- a/include/asm-x86/scatterlist.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef ASM_X86__SCATTERLIST_H
-#define ASM_X86__SCATTERLIST_H
-
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;
-	unsigned int	length;
-	dma_addr_t	dma_address;
-	unsigned int	dma_length;
-};
-
-#define ARCH_HAS_SG_CHAIN
-#define ISA_DMA_THRESHOLD (0x00ffffff)
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#ifdef CONFIG_X86_32
-# define sg_dma_len(sg)		((sg)->length)
-#else
-# define sg_dma_len(sg)		((sg)->dma_length)
-#endif
-
-#endif /* ASM_X86__SCATTERLIST_H */
diff --git a/include/asm-x86/seccomp_32.h b/include/asm-x86/seccomp_32.h
deleted file mode 100644
index cf9ab2d..0000000
--- a/include/asm-x86/seccomp_32.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef ASM_X86__SECCOMP_32_H
-#define ASM_X86__SECCOMP_32_H
-
-#include <linux/thread_info.h>
-
-#ifdef TIF_32BIT
-#error "unexpected TIF_32BIT on i386"
-#endif
-
-#include <linux/unistd.h>
-
-#define __NR_seccomp_read __NR_read
-#define __NR_seccomp_write __NR_write
-#define __NR_seccomp_exit __NR_exit
-#define __NR_seccomp_sigreturn __NR_sigreturn
-
-#endif /* ASM_X86__SECCOMP_32_H */
diff --git a/include/asm-x86/seccomp_64.h b/include/asm-x86/seccomp_64.h
deleted file mode 100644
index 03274ce..0000000
--- a/include/asm-x86/seccomp_64.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef ASM_X86__SECCOMP_64_H
-#define ASM_X86__SECCOMP_64_H
-
-#include <linux/thread_info.h>
-
-#ifdef TIF_32BIT
-#error "unexpected TIF_32BIT on x86_64"
-#else
-#define TIF_32BIT TIF_IA32
-#endif
-
-#include <linux/unistd.h>
-#include <asm/ia32_unistd.h>
-
-#define __NR_seccomp_read __NR_read
-#define __NR_seccomp_write __NR_write
-#define __NR_seccomp_exit __NR_exit
-#define __NR_seccomp_sigreturn __NR_rt_sigreturn
-
-#define __NR_seccomp_read_32 __NR_ia32_read
-#define __NR_seccomp_write_32 __NR_ia32_write
-#define __NR_seccomp_exit_32 __NR_ia32_exit
-#define __NR_seccomp_sigreturn_32 __NR_ia32_sigreturn
-
-#endif /* ASM_X86__SECCOMP_64_H */
diff --git a/include/asm-x86/segment.h b/include/asm-x86/segment.h
deleted file mode 100644
index 5d6e6945..0000000
--- a/include/asm-x86/segment.h
+++ /dev/null
@@ -1,209 +0,0 @@
-#ifndef ASM_X86__SEGMENT_H
-#define ASM_X86__SEGMENT_H
-
-/* Constructor for a conventional segment GDT (or LDT) entry */
-/* This is a macro so it can be used in initializers */
-#define GDT_ENTRY(flags, base, limit)			\
-	((((base)  & 0xff000000ULL) << (56-24)) |	\
-	 (((flags) & 0x0000f0ffULL) << 40) |		\
-	 (((limit) & 0x000f0000ULL) << (48-16)) |	\
-	 (((base)  & 0x00ffffffULL) << 16) |		\
-	 (((limit) & 0x0000ffffULL)))
-
-/* Simple and small GDT entries for booting only */
-
-#define GDT_ENTRY_BOOT_CS	2
-#define __BOOT_CS		(GDT_ENTRY_BOOT_CS * 8)
-
-#define GDT_ENTRY_BOOT_DS	(GDT_ENTRY_BOOT_CS + 1)
-#define __BOOT_DS		(GDT_ENTRY_BOOT_DS * 8)
-
-#define GDT_ENTRY_BOOT_TSS	(GDT_ENTRY_BOOT_CS + 2)
-#define __BOOT_TSS		(GDT_ENTRY_BOOT_TSS * 8)
-
-#ifdef CONFIG_X86_32
-/*
- * The layout of the per-CPU GDT under Linux:
- *
- *   0 - null
- *   1 - reserved
- *   2 - reserved
- *   3 - reserved
- *
- *   4 - unused			<==== new cacheline
- *   5 - unused
- *
- *  ------- start of TLS (Thread-Local Storage) segments:
- *
- *   6 - TLS segment #1			[ glibc's TLS segment ]
- *   7 - TLS segment #2			[ Wine's %fs Win32 segment ]
- *   8 - TLS segment #3
- *   9 - reserved
- *  10 - reserved
- *  11 - reserved
- *
- *  ------- start of kernel segments:
- *
- *  12 - kernel code segment		<==== new cacheline
- *  13 - kernel data segment
- *  14 - default user CS
- *  15 - default user DS
- *  16 - TSS
- *  17 - LDT
- *  18 - PNPBIOS support (16->32 gate)
- *  19 - PNPBIOS support
- *  20 - PNPBIOS support
- *  21 - PNPBIOS support
- *  22 - PNPBIOS support
- *  23 - APM BIOS support
- *  24 - APM BIOS support
- *  25 - APM BIOS support
- *
- *  26 - ESPFIX small SS
- *  27 - per-cpu			[ offset to per-cpu data area ]
- *  28 - unused
- *  29 - unused
- *  30 - unused
- *  31 - TSS for double fault handler
- */
-#define GDT_ENTRY_TLS_MIN	6
-#define GDT_ENTRY_TLS_MAX 	(GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
-
-#define GDT_ENTRY_DEFAULT_USER_CS	14
-
-#define GDT_ENTRY_DEFAULT_USER_DS	15
-
-#define GDT_ENTRY_KERNEL_BASE	12
-
-#define GDT_ENTRY_KERNEL_CS		(GDT_ENTRY_KERNEL_BASE + 0)
-
-#define GDT_ENTRY_KERNEL_DS		(GDT_ENTRY_KERNEL_BASE + 1)
-
-#define GDT_ENTRY_TSS			(GDT_ENTRY_KERNEL_BASE + 4)
-#define GDT_ENTRY_LDT			(GDT_ENTRY_KERNEL_BASE + 5)
-
-#define GDT_ENTRY_PNPBIOS_BASE		(GDT_ENTRY_KERNEL_BASE + 6)
-#define GDT_ENTRY_APMBIOS_BASE		(GDT_ENTRY_KERNEL_BASE + 11)
-
-#define GDT_ENTRY_ESPFIX_SS		(GDT_ENTRY_KERNEL_BASE + 14)
-#define __ESPFIX_SS (GDT_ENTRY_ESPFIX_SS * 8)
-
-#define GDT_ENTRY_PERCPU			(GDT_ENTRY_KERNEL_BASE + 15)
-#ifdef CONFIG_SMP
-#define __KERNEL_PERCPU (GDT_ENTRY_PERCPU * 8)
-#else
-#define __KERNEL_PERCPU 0
-#endif
-
-#define GDT_ENTRY_DOUBLEFAULT_TSS	31
-
-/*
- * The GDT has 32 entries
- */
-#define GDT_ENTRIES 32
-
-/* The PnP BIOS entries in the GDT */
-#define GDT_ENTRY_PNPBIOS_CS32		(GDT_ENTRY_PNPBIOS_BASE + 0)
-#define GDT_ENTRY_PNPBIOS_CS16		(GDT_ENTRY_PNPBIOS_BASE + 1)
-#define GDT_ENTRY_PNPBIOS_DS		(GDT_ENTRY_PNPBIOS_BASE + 2)
-#define GDT_ENTRY_PNPBIOS_TS1		(GDT_ENTRY_PNPBIOS_BASE + 3)
-#define GDT_ENTRY_PNPBIOS_TS2		(GDT_ENTRY_PNPBIOS_BASE + 4)
-
-/* The PnP BIOS selectors */
-#define PNP_CS32   (GDT_ENTRY_PNPBIOS_CS32 * 8)	/* segment for calling fn */
-#define PNP_CS16   (GDT_ENTRY_PNPBIOS_CS16 * 8)	/* code segment for BIOS */
-#define PNP_DS     (GDT_ENTRY_PNPBIOS_DS * 8)	/* data segment for BIOS */
-#define PNP_TS1    (GDT_ENTRY_PNPBIOS_TS1 * 8)	/* transfer data segment */
-#define PNP_TS2    (GDT_ENTRY_PNPBIOS_TS2 * 8)	/* another data segment */
-
-/* Bottom two bits of selector give the ring privilege level */
-#define SEGMENT_RPL_MASK	0x3
-/* Bit 2 is table indicator (LDT/GDT) */
-#define SEGMENT_TI_MASK		0x4
-
-/* User mode is privilege level 3 */
-#define USER_RPL		0x3
-/* LDT segment has TI set, GDT has it cleared */
-#define SEGMENT_LDT		0x4
-#define SEGMENT_GDT		0x0
-
-/*
- * Matching rules for certain types of segments.
- */
-
-/* Matches PNP_CS32 and PNP_CS16 (they must be consecutive) */
-#define SEGMENT_IS_PNP_CODE(x)   (((x) & 0xf4) == GDT_ENTRY_PNPBIOS_BASE * 8)
-
-
-#else
-#include <asm/cache.h>
-
-#define GDT_ENTRY_KERNEL32_CS 1
-#define GDT_ENTRY_KERNEL_CS 2
-#define GDT_ENTRY_KERNEL_DS 3
-
-#define __KERNEL32_CS   (GDT_ENTRY_KERNEL32_CS * 8)
-
-/*
- * we cannot use the same code segment descriptor for user and kernel
- * -- not even in the long flat mode, because of different DPL /kkeil
- * The segment offset needs to contain a RPL. Grr. -AK
- * GDT layout to get 64bit syscall right (sysret hardcodes gdt offsets)
- */
-#define GDT_ENTRY_DEFAULT_USER32_CS 4
-#define GDT_ENTRY_DEFAULT_USER_DS 5
-#define GDT_ENTRY_DEFAULT_USER_CS 6
-#define __USER32_CS   (GDT_ENTRY_DEFAULT_USER32_CS * 8 + 3)
-#define __USER32_DS	__USER_DS
-
-#define GDT_ENTRY_TSS 8	/* needs two entries */
-#define GDT_ENTRY_LDT 10 /* needs two entries */
-#define GDT_ENTRY_TLS_MIN 12
-#define GDT_ENTRY_TLS_MAX 14
-
-#define GDT_ENTRY_PER_CPU 15	/* Abused to load per CPU data from limit */
-#define __PER_CPU_SEG	(GDT_ENTRY_PER_CPU * 8 + 3)
-
-/* TLS indexes for 64bit - hardcoded in arch_prctl */
-#define FS_TLS 0
-#define GS_TLS 1
-
-#define GS_TLS_SEL ((GDT_ENTRY_TLS_MIN+GS_TLS)*8 + 3)
-#define FS_TLS_SEL ((GDT_ENTRY_TLS_MIN+FS_TLS)*8 + 3)
-
-#define GDT_ENTRIES 16
-
-#endif
-
-#define __KERNEL_CS	(GDT_ENTRY_KERNEL_CS * 8)
-#define __KERNEL_DS	(GDT_ENTRY_KERNEL_DS * 8)
-#define __USER_DS     (GDT_ENTRY_DEFAULT_USER_DS* 8 + 3)
-#define __USER_CS     (GDT_ENTRY_DEFAULT_USER_CS* 8 + 3)
-#ifndef CONFIG_PARAVIRT
-#define get_kernel_rpl()  0
-#endif
-
-/* User mode is privilege level 3 */
-#define USER_RPL		0x3
-/* LDT segment has TI set, GDT has it cleared */
-#define SEGMENT_LDT		0x4
-#define SEGMENT_GDT		0x0
-
-/* Bottom two bits of selector give the ring privilege level */
-#define SEGMENT_RPL_MASK	0x3
-/* Bit 2 is table indicator (LDT/GDT) */
-#define SEGMENT_TI_MASK		0x4
-
-#define IDT_ENTRIES 256
-#define NUM_EXCEPTION_VECTORS 32
-#define GDT_SIZE (GDT_ENTRIES * 8)
-#define GDT_ENTRY_TLS_ENTRIES 3
-#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-extern const char early_idt_handlers[NUM_EXCEPTION_VECTORS][10];
-#endif
-#endif
-
-#endif /* ASM_X86__SEGMENT_H */
diff --git a/include/asm-x86/sembuf.h b/include/asm-x86/sembuf.h
deleted file mode 100644
index 81f06b7..0000000
--- a/include/asm-x86/sembuf.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef ASM_X86__SEMBUF_H
-#define ASM_X86__SEMBUF_H
-
-/*
- * The semid64_ds structure for x86 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-struct semid64_ds {
-	struct ipc64_perm sem_perm;	/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;	/* last semop time */
-	unsigned long	__unused1;
-	__kernel_time_t	sem_ctime;	/* last change time */
-	unsigned long	__unused2;
-	unsigned long	sem_nsems;	/* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* ASM_X86__SEMBUF_H */
diff --git a/include/asm-x86/serial.h b/include/asm-x86/serial.h
deleted file mode 100644
index 303660b..0000000
--- a/include/asm-x86/serial.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef ASM_X86__SERIAL_H
-#define ASM_X86__SERIAL_H
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#define SERIAL_PORT_DFNS			\
-	/* UART CLK   PORT IRQ     FLAGS        */			\
-	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
-	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
-	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
-	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
-
-#endif /* ASM_X86__SERIAL_H */
diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h
deleted file mode 100644
index 11b6cc1..0000000
--- a/include/asm-x86/setup.h
+++ /dev/null
@@ -1,105 +0,0 @@
-#ifndef ASM_X86__SETUP_H
-#define ASM_X86__SETUP_H
-
-#define COMMAND_LINE_SIZE 2048
-
-#ifndef __ASSEMBLY__
-
-/* Interrupt control for vSMPowered x86_64 systems */
-void vsmp_init(void);
-
-#ifdef CONFIG_X86_VISWS
-extern void visws_early_detect(void);
-extern int is_visws_box(void);
-#else
-static inline void visws_early_detect(void) { }
-static inline int is_visws_box(void) { return 0; }
-#endif
-
-/*
- * Any setup quirks to be performed?
- */
-struct mpc_config_processor;
-struct mpc_config_bus;
-struct mp_config_oemtable;
-struct x86_quirks {
-	int (*arch_pre_time_init)(void);
-	int (*arch_time_init)(void);
-	int (*arch_pre_intr_init)(void);
-	int (*arch_intr_init)(void);
-	int (*arch_trap_init)(void);
-	char * (*arch_memory_setup)(void);
-	int (*mach_get_smp_config)(unsigned int early);
-	int (*mach_find_smp_config)(unsigned int reserve);
-
-	int *mpc_record;
-	int (*mpc_apic_id)(struct mpc_config_processor *m);
-	void (*mpc_oem_bus_info)(struct mpc_config_bus *m, char *name);
-	void (*mpc_oem_pci_bus)(struct mpc_config_bus *m);
-	void (*smp_read_mpc_oem)(struct mp_config_oemtable *oemtable,
-                                    unsigned short oemsize);
-	int (*setup_ioapic_ids)(void);
-};
-
-extern struct x86_quirks *x86_quirks;
-extern unsigned long saved_video_mode;
-
-#ifndef CONFIG_PARAVIRT
-#define paravirt_post_allocator_init()	do {} while (0)
-#endif
-#endif /* __ASSEMBLY__ */
-
-#ifdef __KERNEL__
-
-#ifdef __i386__
-
-#include <linux/pfn.h>
-/*
- * Reserved space for vmalloc and iomap - defined in asm/page.h
- */
-#define MAXMEM_PFN	PFN_DOWN(MAXMEM)
-#define MAX_NONPAE_PFN	(1 << 20)
-
-#endif /* __i386__ */
-
-#define PARAM_SIZE 4096		/* sizeof(struct boot_params) */
-
-#define OLD_CL_MAGIC		0xA33F
-#define OLD_CL_ADDRESS		0x020	/* Relative to real mode data */
-#define NEW_CL_POINTER		0x228	/* Relative to real mode data */
-
-#ifndef __ASSEMBLY__
-#include <asm/bootparam.h>
-
-#ifndef _SETUP
-
-/*
- * This is set up by the setup-routine at boot-time
- */
-extern struct boot_params boot_params;
-
-/*
- * Do NOT EVER look at the BIOS memory size location.
- * It does not work on many machines.
- */
-#define LOWMEMSIZE()	(0x9f000)
-
-#ifdef __i386__
-
-void __init i386_start_kernel(void);
-extern void probe_roms(void);
-
-extern unsigned long init_pg_tables_start;
-extern unsigned long init_pg_tables_end;
-
-#else
-void __init x86_64_init_pda(void);
-void __init x86_64_start_kernel(char *real_mode);
-void __init x86_64_start_reservations(char *real_mode_data);
-
-#endif /* __i386__ */
-#endif /* _SETUP */
-#endif /* __ASSEMBLY__ */
-#endif  /*  __KERNEL__  */
-
-#endif /* ASM_X86__SETUP_H */
diff --git a/include/asm-x86/shmbuf.h b/include/asm-x86/shmbuf.h
deleted file mode 100644
index f51aec2..0000000
--- a/include/asm-x86/shmbuf.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef ASM_X86__SHMBUF_H
-#define ASM_X86__SHMBUF_H
-
-/*
- * The shmid64_ds structure for x86 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space on 32 bit is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- *
- * Pad space on 64 bit is left for:
- * - 2 miscellaneous 64-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-#ifdef __i386__
-	unsigned long		__unused1;
-#endif
-	__kernel_time_t		shm_dtime;	/* last detach time */
-#ifdef __i386__
-	unsigned long		__unused2;
-#endif
-	__kernel_time_t		shm_ctime;	/* last change time */
-#ifdef __i386__
-	unsigned long		__unused3;
-#endif
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* ASM_X86__SHMBUF_H */
diff --git a/include/asm-x86/shmparam.h b/include/asm-x86/shmparam.h
deleted file mode 100644
index a83a1fd..0000000
--- a/include/asm-x86/shmparam.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef ASM_X86__SHMPARAM_H
-#define ASM_X86__SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE	 /* attach addr a multiple of this */
-
-#endif /* ASM_X86__SHMPARAM_H */
diff --git a/include/asm-x86/sigcontext.h b/include/asm-x86/sigcontext.h
deleted file mode 100644
index ee813f4..0000000
--- a/include/asm-x86/sigcontext.h
+++ /dev/null
@@ -1,284 +0,0 @@
-#ifndef ASM_X86__SIGCONTEXT_H
-#define ASM_X86__SIGCONTEXT_H
-
-#include <linux/compiler.h>
-#include <asm/types.h>
-
-#define FP_XSTATE_MAGIC1	0x46505853U
-#define FP_XSTATE_MAGIC2	0x46505845U
-#define FP_XSTATE_MAGIC2_SIZE	sizeof(FP_XSTATE_MAGIC2)
-
-/*
- * bytes 464..511 in the current 512byte layout of fxsave/fxrstor frame
- * are reserved for SW usage. On cpu's supporting xsave/xrstor, these bytes
- * are used to extended the fpstate pointer in the sigcontext, which now
- * includes the extended state information along with fpstate information.
- *
- * Presence of FP_XSTATE_MAGIC1 at the beginning of this SW reserved
- * area and FP_XSTATE_MAGIC2 at the end of memory layout
- * (extended_size - FP_XSTATE_MAGIC2_SIZE) indicates the presence of the
- * extended state information in the memory layout pointed by the fpstate
- * pointer in sigcontext.
- */
-struct _fpx_sw_bytes {
-	__u32 magic1;		/* FP_XSTATE_MAGIC1 */
-	__u32 extended_size;	/* total size of the layout referred by
-				 * fpstate pointer in the sigcontext.
-				 */
-	__u64 xstate_bv;
-				/* feature bit mask (including fp/sse/extended
-				 * state) that is present in the memory
-				 * layout.
-				 */
-	__u32 xstate_size;	/* actual xsave state size, based on the
-				 * features saved in the layout.
-				 * 'extended_size' will be greater than
-				 * 'xstate_size'.
-				 */
-	__u32 padding[7];	/*  for future use. */
-};
-
-#ifdef __i386__
-/*
- * As documented in the iBCS2 standard..
- *
- * The first part of "struct _fpstate" is just the normal i387
- * hardware setup, the extra "status" word is used to save the
- * coprocessor status word before entering the handler.
- *
- * Pentium III FXSR, SSE support
- *	Gareth Hughes <gareth@valinux.com>, May 2000
- *
- * The FPU state data structure has had to grow to accommodate the
- * extended FPU state required by the Streaming SIMD Extensions.
- * There is no documented standard to accomplish this at the moment.
- */
-struct _fpreg {
-	unsigned short significand[4];
-	unsigned short exponent;
-};
-
-struct _fpxreg {
-	unsigned short significand[4];
-	unsigned short exponent;
-	unsigned short padding[3];
-};
-
-struct _xmmreg {
-	unsigned long element[4];
-};
-
-struct _fpstate {
-	/* Regular FPU environment */
-	unsigned long	cw;
-	unsigned long	sw;
-	unsigned long	tag;
-	unsigned long	ipoff;
-	unsigned long	cssel;
-	unsigned long	dataoff;
-	unsigned long	datasel;
-	struct _fpreg	_st[8];
-	unsigned short	status;
-	unsigned short	magic;		/* 0xffff = regular FPU data only */
-
-	/* FXSR FPU environment */
-	unsigned long	_fxsr_env[6];	/* FXSR FPU env is ignored */
-	unsigned long	mxcsr;
-	unsigned long	reserved;
-	struct _fpxreg	_fxsr_st[8];	/* FXSR FPU reg data is ignored */
-	struct _xmmreg	_xmm[8];
-	unsigned long	padding1[44];
-
-	union {
-		unsigned long	padding2[12];
-		struct _fpx_sw_bytes sw_reserved; /* represents the extended
-						   * state info */
-	};
-};
-
-#define X86_FXSR_MAGIC		0x0000
-
-#ifdef __KERNEL__
-struct sigcontext {
-	unsigned short gs, __gsh;
-	unsigned short fs, __fsh;
-	unsigned short es, __esh;
-	unsigned short ds, __dsh;
-	unsigned long di;
-	unsigned long si;
-	unsigned long bp;
-	unsigned long sp;
-	unsigned long bx;
-	unsigned long dx;
-	unsigned long cx;
-	unsigned long ax;
-	unsigned long trapno;
-	unsigned long err;
-	unsigned long ip;
-	unsigned short cs, __csh;
-	unsigned long flags;
-	unsigned long sp_at_signal;
-	unsigned short ss, __ssh;
-
-	/*
-	 * fpstate is really (struct _fpstate *) or (struct _xstate *)
-	 * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
-	 * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
-	 * of extended memory layout. See comments at the defintion of
-	 * (struct _fpx_sw_bytes)
-	 */
-	void __user *fpstate;		/* zero when no FPU/extended context */
-	unsigned long oldmask;
-	unsigned long cr2;
-};
-#else /* __KERNEL__ */
-/*
- * User-space might still rely on the old definition:
- */
-struct sigcontext {
-	unsigned short gs, __gsh;
-	unsigned short fs, __fsh;
-	unsigned short es, __esh;
-	unsigned short ds, __dsh;
-	unsigned long edi;
-	unsigned long esi;
-	unsigned long ebp;
-	unsigned long esp;
-	unsigned long ebx;
-	unsigned long edx;
-	unsigned long ecx;
-	unsigned long eax;
-	unsigned long trapno;
-	unsigned long err;
-	unsigned long eip;
-	unsigned short cs, __csh;
-	unsigned long eflags;
-	unsigned long esp_at_signal;
-	unsigned short ss, __ssh;
-	struct _fpstate __user *fpstate;
-	unsigned long oldmask;
-	unsigned long cr2;
-};
-#endif /* !__KERNEL__ */
-
-#else /* __i386__ */
-
-/* FXSAVE frame */
-/* Note: reserved1/2 may someday contain valuable data. Always save/restore
-   them when you change signal frames. */
-struct _fpstate {
-	__u16	cwd;
-	__u16	swd;
-	__u16	twd;		/* Note this is not the same as the
-				   32bit/x87/FSAVE twd */
-	__u16	fop;
-	__u64	rip;
-	__u64	rdp;
-	__u32	mxcsr;
-	__u32	mxcsr_mask;
-	__u32	st_space[32];	/* 8*16 bytes for each FP-reg */
-	__u32	xmm_space[64];	/* 16*16 bytes for each XMM-reg  */
-	__u32	reserved2[12];
-	union {
-		__u32	reserved3[12];
-		struct _fpx_sw_bytes sw_reserved; /* represents the extended
-						   * state information */
-	};
-};
-
-#ifdef __KERNEL__
-struct sigcontext {
-	unsigned long r8;
-	unsigned long r9;
-	unsigned long r10;
-	unsigned long r11;
-	unsigned long r12;
-	unsigned long r13;
-	unsigned long r14;
-	unsigned long r15;
-	unsigned long di;
-	unsigned long si;
-	unsigned long bp;
-	unsigned long bx;
-	unsigned long dx;
-	unsigned long ax;
-	unsigned long cx;
-	unsigned long sp;
-	unsigned long ip;
-	unsigned long flags;
-	unsigned short cs;
-	unsigned short gs;
-	unsigned short fs;
-	unsigned short __pad0;
-	unsigned long err;
-	unsigned long trapno;
-	unsigned long oldmask;
-	unsigned long cr2;
-
-	/*
-	 * fpstate is really (struct _fpstate *) or (struct _xstate *)
-	 * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
-	 * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
-	 * of extended memory layout. See comments at the defintion of
-	 * (struct _fpx_sw_bytes)
-	 */
-	void __user *fpstate;		/* zero when no FPU/extended context */
-	unsigned long reserved1[8];
-};
-#else /* __KERNEL__ */
-/*
- * User-space might still rely on the old definition:
- */
-struct sigcontext {
-	unsigned long r8;
-	unsigned long r9;
-	unsigned long r10;
-	unsigned long r11;
-	unsigned long r12;
-	unsigned long r13;
-	unsigned long r14;
-	unsigned long r15;
-	unsigned long rdi;
-	unsigned long rsi;
-	unsigned long rbp;
-	unsigned long rbx;
-	unsigned long rdx;
-	unsigned long rax;
-	unsigned long rcx;
-	unsigned long rsp;
-	unsigned long rip;
-	unsigned long eflags;		/* RFLAGS */
-	unsigned short cs;
-	unsigned short gs;
-	unsigned short fs;
-	unsigned short __pad0;
-	unsigned long err;
-	unsigned long trapno;
-	unsigned long oldmask;
-	unsigned long cr2;
-	struct _fpstate __user *fpstate;	/* zero when no FPU context */
-	unsigned long reserved1[8];
-};
-#endif /* !__KERNEL__ */
-
-#endif /* !__i386__ */
-
-struct _xsave_hdr {
-	__u64 xstate_bv;
-	__u64 reserved1[2];
-	__u64 reserved2[5];
-};
-
-/*
- * Extended state pointed by the fpstate pointer in the sigcontext.
- * In addition to the fpstate, information encoded in the xstate_hdr
- * indicates the presence of other extended state information
- * supported by the processor and OS.
- */
-struct _xstate {
-	struct _fpstate fpstate;
-	struct _xsave_hdr xstate_hdr;
-	/* new processor state extensions go here */
-};
-
-#endif /* ASM_X86__SIGCONTEXT_H */
diff --git a/include/asm-x86/sigcontext32.h b/include/asm-x86/sigcontext32.h
deleted file mode 100644
index 8c34703..0000000
--- a/include/asm-x86/sigcontext32.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef ASM_X86__SIGCONTEXT32_H
-#define ASM_X86__SIGCONTEXT32_H
-
-/* signal context for 32bit programs. */
-
-#define X86_FXSR_MAGIC		0x0000
-
-struct _fpreg {
-	unsigned short significand[4];
-	unsigned short exponent;
-};
-
-struct _fpxreg {
-	unsigned short significand[4];
-	unsigned short exponent;
-	unsigned short padding[3];
-};
-
-struct _xmmreg {
-	__u32	element[4];
-};
-
-/* FSAVE frame with extensions */
-struct _fpstate_ia32 {
-	/* Regular FPU environment */
-	__u32 	cw;
-	__u32	sw;
-	__u32	tag;	/* not compatible to 64bit twd */
-	__u32	ipoff;
-	__u32	cssel;
-	__u32	dataoff;
-	__u32	datasel;
-	struct _fpreg	_st[8];
-	unsigned short	status;
-	unsigned short	magic;		/* 0xffff = regular FPU data only */
-
-	/* FXSR FPU environment */
-	__u32	_fxsr_env[6];
-	__u32	mxcsr;
-	__u32	reserved;
-	struct _fpxreg	_fxsr_st[8];
-	struct _xmmreg	_xmm[8];	/* It's actually 16 */
-	__u32	padding[44];
-	union {
-		__u32 padding2[12];
-		struct _fpx_sw_bytes sw_reserved;
-	};
-};
-
-struct sigcontext_ia32 {
-       unsigned short gs, __gsh;
-       unsigned short fs, __fsh;
-       unsigned short es, __esh;
-       unsigned short ds, __dsh;
-       unsigned int di;
-       unsigned int si;
-       unsigned int bp;
-       unsigned int sp;
-       unsigned int bx;
-       unsigned int dx;
-       unsigned int cx;
-       unsigned int ax;
-       unsigned int trapno;
-       unsigned int err;
-       unsigned int ip;
-       unsigned short cs, __csh;
-       unsigned int flags;
-       unsigned int sp_at_signal;
-       unsigned short ss, __ssh;
-       unsigned int fpstate;		/* really (struct _fpstate_ia32 *) */
-       unsigned int oldmask;
-       unsigned int cr2;
-};
-
-#endif /* ASM_X86__SIGCONTEXT32_H */
diff --git a/include/asm-x86/siginfo.h b/include/asm-x86/siginfo.h
deleted file mode 100644
index 808bdfb..0000000
--- a/include/asm-x86/siginfo.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef ASM_X86__SIGINFO_H
-#define ASM_X86__SIGINFO_H
-
-#ifdef __x86_64__
-# define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
-#endif
-
-#include <asm-generic/siginfo.h>
-
-#endif /* ASM_X86__SIGINFO_H */
diff --git a/include/asm-x86/signal.h b/include/asm-x86/signal.h
deleted file mode 100644
index 65acc82..0000000
--- a/include/asm-x86/signal.h
+++ /dev/null
@@ -1,262 +0,0 @@
-#ifndef ASM_X86__SIGNAL_H
-#define ASM_X86__SIGNAL_H
-
-#ifndef __ASSEMBLY__
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/compiler.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
-#include <linux/linkage.h>
-
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG		64
-
-#ifdef __i386__
-# define _NSIG_BPW	32
-#else
-# define _NSIG_BPW	64
-#endif
-
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001u
-#define SA_NOCLDWAIT	0x00000002u
-#define SA_SIGINFO	0x00000004u
-#define SA_ONSTACK	0x08000000u
-#define SA_RESTART	0x10000000u
-#define SA_NODEFER	0x40000000u
-#define SA_RESETHAND	0x80000000u
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal.h>
-
-#ifndef __ASSEMBLY__
-
-#ifdef __i386__
-# ifdef __KERNEL__
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-
-extern void do_notify_resume(struct pt_regs *, void *, __u32);
-
-# else /* __KERNEL__ */
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-# endif /* ! __KERNEL__ */
-#else /* __i386__ */
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-
-#endif /* !__i386__ */
-
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-#include <asm/sigcontext.h>
-
-#ifdef __i386__
-
-#define __HAVE_ARCH_SIG_BITOPS
-
-#define sigaddset(set,sig)		    \
-	(__builtin_constant_p(sig)	    \
-	 ? __const_sigaddset((set), (sig))  \
-	 : __gen_sigaddset((set), (sig)))
-
-static inline void __gen_sigaddset(sigset_t *set, int _sig)
-{
-	asm("btsl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc");
-}
-
-static inline void __const_sigaddset(sigset_t *set, int _sig)
-{
-	unsigned long sig = _sig - 1;
-	set->sig[sig / _NSIG_BPW] |= 1 << (sig % _NSIG_BPW);
-}
-
-#define sigdelset(set, sig)		    \
-	(__builtin_constant_p(sig)	    \
-	 ? __const_sigdelset((set), (sig))  \
-	 : __gen_sigdelset((set), (sig)))
-
-
-static inline void __gen_sigdelset(sigset_t *set, int _sig)
-{
-	asm("btrl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc");
-}
-
-static inline void __const_sigdelset(sigset_t *set, int _sig)
-{
-	unsigned long sig = _sig - 1;
-	set->sig[sig / _NSIG_BPW] &= ~(1 << (sig % _NSIG_BPW));
-}
-
-static inline int __const_sigismember(sigset_t *set, int _sig)
-{
-	unsigned long sig = _sig - 1;
-	return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
-}
-
-static inline int __gen_sigismember(sigset_t *set, int _sig)
-{
-	int ret;
-	asm("btl %2,%1\n\tsbbl %0,%0"
-	    : "=r"(ret) : "m"(*set), "Ir"(_sig-1) : "cc");
-	return ret;
-}
-
-#define sigismember(set, sig)			\
-	(__builtin_constant_p(sig)		\
-	 ? __const_sigismember((set), (sig))	\
-	 : __gen_sigismember((set), (sig)))
-
-static inline int sigfindinword(unsigned long word)
-{
-	asm("bsfl %1,%0" : "=r"(word) : "rm"(word) : "cc");
-	return word;
-}
-
-struct pt_regs;
-
-#else /* __i386__ */
-
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#endif /* !__i386__ */
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-
-#endif /* ASM_X86__SIGNAL_H */
diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h
deleted file mode 100644
index a6afc29..0000000
--- a/include/asm-x86/smp.h
+++ /dev/null
@@ -1,229 +0,0 @@
-#ifndef ASM_X86__SMP_H
-#define ASM_X86__SMP_H
-#ifndef __ASSEMBLY__
-#include <linux/cpumask.h>
-#include <linux/init.h>
-#include <asm/percpu.h>
-
-/*
- * We need the APIC definitions automatically as part of 'smp.h'
- */
-#ifdef CONFIG_X86_LOCAL_APIC
-# include <asm/mpspec.h>
-# include <asm/apic.h>
-# ifdef CONFIG_X86_IO_APIC
-#  include <asm/io_apic.h>
-# endif
-#endif
-#include <asm/pda.h>
-#include <asm/thread_info.h>
-
-extern cpumask_t cpu_callout_map;
-extern cpumask_t cpu_initialized;
-extern cpumask_t cpu_callin_map;
-
-extern void (*mtrr_hook)(void);
-extern void zap_low_mappings(void);
-
-extern int __cpuinit get_local_pda(int cpu);
-
-extern int smp_num_siblings;
-extern unsigned int num_processors;
-extern cpumask_t cpu_initialized;
-
-DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
-DECLARE_PER_CPU(cpumask_t, cpu_core_map);
-DECLARE_PER_CPU(u16, cpu_llc_id);
-#ifdef CONFIG_X86_32
-DECLARE_PER_CPU(int, cpu_number);
-#endif
-
-DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid);
-DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);
-
-/* Static state in head.S used to set up a CPU */
-extern struct {
-	void *sp;
-	unsigned short ss;
-} stack_start;
-
-struct smp_ops {
-	void (*smp_prepare_boot_cpu)(void);
-	void (*smp_prepare_cpus)(unsigned max_cpus);
-	void (*smp_cpus_done)(unsigned max_cpus);
-
-	void (*smp_send_stop)(void);
-	void (*smp_send_reschedule)(int cpu);
-
-	int (*cpu_up)(unsigned cpu);
-	int (*cpu_disable)(void);
-	void (*cpu_die)(unsigned int cpu);
-	void (*play_dead)(void);
-
-	void (*send_call_func_ipi)(cpumask_t mask);
-	void (*send_call_func_single_ipi)(int cpu);
-};
-
-/* Globals due to paravirt */
-extern void set_cpu_sibling_map(int cpu);
-
-#ifdef CONFIG_SMP
-#ifndef CONFIG_PARAVIRT
-#define startup_ipi_hook(phys_apicid, start_eip, start_esp) do { } while (0)
-#endif
-extern struct smp_ops smp_ops;
-
-static inline void smp_send_stop(void)
-{
-	smp_ops.smp_send_stop();
-}
-
-static inline void smp_prepare_boot_cpu(void)
-{
-	smp_ops.smp_prepare_boot_cpu();
-}
-
-static inline void smp_prepare_cpus(unsigned int max_cpus)
-{
-	smp_ops.smp_prepare_cpus(max_cpus);
-}
-
-static inline void smp_cpus_done(unsigned int max_cpus)
-{
-	smp_ops.smp_cpus_done(max_cpus);
-}
-
-static inline int __cpu_up(unsigned int cpu)
-{
-	return smp_ops.cpu_up(cpu);
-}
-
-static inline int __cpu_disable(void)
-{
-	return smp_ops.cpu_disable();
-}
-
-static inline void __cpu_die(unsigned int cpu)
-{
-	smp_ops.cpu_die(cpu);
-}
-
-static inline void play_dead(void)
-{
-	smp_ops.play_dead();
-}
-
-static inline void smp_send_reschedule(int cpu)
-{
-	smp_ops.smp_send_reschedule(cpu);
-}
-
-static inline void arch_send_call_function_single_ipi(int cpu)
-{
-	smp_ops.send_call_func_single_ipi(cpu);
-}
-
-static inline void arch_send_call_function_ipi(cpumask_t mask)
-{
-	smp_ops.send_call_func_ipi(mask);
-}
-
-void cpu_disable_common(void);
-void native_smp_prepare_boot_cpu(void);
-void native_smp_prepare_cpus(unsigned int max_cpus);
-void native_smp_cpus_done(unsigned int max_cpus);
-int native_cpu_up(unsigned int cpunum);
-int native_cpu_disable(void);
-void native_cpu_die(unsigned int cpu);
-void native_play_dead(void);
-void play_dead_common(void);
-
-void native_send_call_func_ipi(cpumask_t mask);
-void native_send_call_func_single_ipi(int cpu);
-
-extern void prefill_possible_map(void);
-
-void smp_store_cpu_info(int id);
-#define cpu_physical_id(cpu)	per_cpu(x86_cpu_to_apicid, cpu)
-
-/* We don't mark CPUs online until __cpu_up(), so we need another measure */
-static inline int num_booting_cpus(void)
-{
-	return cpus_weight(cpu_callout_map);
-}
-#else
-static inline void prefill_possible_map(void)
-{
-}
-#endif /* CONFIG_SMP */
-
-extern unsigned disabled_cpus __cpuinitdata;
-
-#ifdef CONFIG_X86_32_SMP
-/*
- * This function is needed by all SMP systems. It must _always_ be valid
- * from the initial startup. We map APIC_BASE very early in page_setup(),
- * so this is correct in the x86 case.
- */
-#define raw_smp_processor_id() (x86_read_percpu(cpu_number))
-extern int safe_smp_processor_id(void);
-
-#elif defined(CONFIG_X86_64_SMP)
-#define raw_smp_processor_id()	read_pda(cpunumber)
-
-#define stack_smp_processor_id()					\
-({								\
-	struct thread_info *ti;						\
-	__asm__("andq %%rsp,%0; ":"=r" (ti) : "0" (CURRENT_MASK));	\
-	ti->cpu;							\
-})
-#define safe_smp_processor_id()		smp_processor_id()
-
-#else /* !CONFIG_X86_32_SMP && !CONFIG_X86_64_SMP */
-#define cpu_physical_id(cpu)		boot_cpu_physical_apicid
-#define safe_smp_processor_id()		0
-#define stack_smp_processor_id() 	0
-#endif
-
-#ifdef CONFIG_X86_LOCAL_APIC
-
-#ifndef CONFIG_X86_64
-static inline int logical_smp_processor_id(void)
-{
-	/* we don't want to mark this access volatile - bad code generation */
-	return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
-}
-
-#include <mach_apicdef.h>
-static inline unsigned int read_apic_id(void)
-{
-	unsigned int reg;
-
-	reg = *(u32 *)(APIC_BASE + APIC_ID);
-
-	return GET_APIC_ID(reg);
-}
-#endif
-
-
-# if defined(APIC_DEFINITION) || defined(CONFIG_X86_64)
-extern int hard_smp_processor_id(void);
-# else
-#include <mach_apicdef.h>
-static inline int hard_smp_processor_id(void)
-{
-	/* we don't want to mark this access volatile - bad code generation */
-	return read_apic_id();
-}
-# endif /* APIC_DEFINITION */
-
-#else /* CONFIG_X86_LOCAL_APIC */
-
-# ifndef CONFIG_SMP
-#  define hard_smp_processor_id()	0
-# endif
-
-#endif /* CONFIG_X86_LOCAL_APIC */
-
-#endif /* __ASSEMBLY__ */
-#endif /* ASM_X86__SMP_H */
diff --git a/include/asm-x86/socket.h b/include/asm-x86/socket.h
deleted file mode 100644
index db73274..0000000
--- a/include/asm-x86/socket.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef ASM_X86__SOCKET_H
-#define ASM_X86__SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-
-#define SO_PEERNAME		28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#endif /* ASM_X86__SOCKET_H */
diff --git a/include/asm-x86/sockios.h b/include/asm-x86/sockios.h
deleted file mode 100644
index a006704..0000000
--- a/include/asm-x86/sockios.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef ASM_X86__SOCKIOS_H
-#define ASM_X86__SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif /* ASM_X86__SOCKIOS_H */
diff --git a/include/asm-x86/sparsemem.h b/include/asm-x86/sparsemem.h
deleted file mode 100644
index 38f8e6b..0000000
--- a/include/asm-x86/sparsemem.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef ASM_X86__SPARSEMEM_H
-#define ASM_X86__SPARSEMEM_H
-
-#ifdef CONFIG_SPARSEMEM
-/*
- * generic non-linear memory support:
- *
- * 1) we will not split memory into more chunks than will fit into the flags
- *    field of the struct page
- *
- * SECTION_SIZE_BITS		2^n: size of each section
- * MAX_PHYSADDR_BITS		2^n: max size of physical address space
- * MAX_PHYSMEM_BITS		2^n: how much memory we can have in that space
- *
- */
-
-#ifdef CONFIG_X86_32
-# ifdef CONFIG_X86_PAE
-#  define SECTION_SIZE_BITS	29
-#  define MAX_PHYSADDR_BITS	36
-#  define MAX_PHYSMEM_BITS	36
-# else
-#  define SECTION_SIZE_BITS	26
-#  define MAX_PHYSADDR_BITS	32
-#  define MAX_PHYSMEM_BITS	32
-# endif
-#else /* CONFIG_X86_32 */
-# define SECTION_SIZE_BITS	27 /* matt - 128 is convenient right now */
-# define MAX_PHYSADDR_BITS	44
-# define MAX_PHYSMEM_BITS	44
-#endif
-
-#endif /* CONFIG_SPARSEMEM */
-#endif /* ASM_X86__SPARSEMEM_H */
diff --git a/include/asm-x86/spinlock.h b/include/asm-x86/spinlock.h
deleted file mode 100644
index 157ff7f..0000000
--- a/include/asm-x86/spinlock.h
+++ /dev/null
@@ -1,364 +0,0 @@
-#ifndef ASM_X86__SPINLOCK_H
-#define ASM_X86__SPINLOCK_H
-
-#include <asm/atomic.h>
-#include <asm/rwlock.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <linux/compiler.h>
-#include <asm/paravirt.h>
-/*
- * Your basic SMP spinlocks, allowing only a single CPU anywhere
- *
- * Simple spin lock operations.  There are two variants, one clears IRQ's
- * on the local processor, one does not.
- *
- * These are fair FIFO ticket locks, which are currently limited to 256
- * CPUs.
- *
- * (the type definitions are in asm/spinlock_types.h)
- */
-
-#ifdef CONFIG_X86_32
-# define LOCK_PTR_REG "a"
-# define REG_PTR_MODE "k"
-#else
-# define LOCK_PTR_REG "D"
-# define REG_PTR_MODE "q"
-#endif
-
-#if defined(CONFIG_X86_32) && \
-	(defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE))
-/*
- * On PPro SMP or if we are using OOSTORE, we use a locked operation to unlock
- * (PPro errata 66, 92)
- */
-# define UNLOCK_LOCK_PREFIX LOCK_PREFIX
-#else
-# define UNLOCK_LOCK_PREFIX
-#endif
-
-/*
- * Ticket locks are conceptually two parts, one indicating the current head of
- * the queue, and the other indicating the current tail. The lock is acquired
- * by atomically noting the tail and incrementing it by one (thus adding
- * ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
- *
- * We use an xadd covering *both* parts of the lock, to increment the tail and
- * also load the position of the head, which takes care of memory ordering
- * issues and should be optimal for the uncontended case. Note the tail must be
- * in the high part, because a wide xadd increment of the low part would carry
- * up and contaminate the high part.
- *
- * With fewer than 2^8 possible CPUs, we can use x86's partial registers to
- * save some instructions and make the code more elegant. There really isn't
- * much between them in performance though, especially as locks are out of line.
- */
-#if (NR_CPUS < 256)
-#define TICKET_SHIFT 8
-
-static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
-{
-	short inc = 0x0100;
-
-	asm volatile (
-		LOCK_PREFIX "xaddw %w0, %1\n"
-		"1:\t"
-		"cmpb %h0, %b0\n\t"
-		"je 2f\n\t"
-		"rep ; nop\n\t"
-		"movb %1, %b0\n\t"
-		/* don't need lfence here, because loads are in-order */
-		"jmp 1b\n"
-		"2:"
-		: "+Q" (inc), "+m" (lock->slock)
-		:
-		: "memory", "cc");
-}
-
-static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock)
-{
-	int tmp, new;
-
-	asm volatile("movzwl %2, %0\n\t"
-		     "cmpb %h0,%b0\n\t"
-		     "leal 0x100(%" REG_PTR_MODE "0), %1\n\t"
-		     "jne 1f\n\t"
-		     LOCK_PREFIX "cmpxchgw %w1,%2\n\t"
-		     "1:"
-		     "sete %b1\n\t"
-		     "movzbl %b1,%0\n\t"
-		     : "=&a" (tmp), "=&q" (new), "+m" (lock->slock)
-		     :
-		     : "memory", "cc");
-
-	return tmp;
-}
-
-static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock)
-{
-	asm volatile(UNLOCK_LOCK_PREFIX "incb %0"
-		     : "+m" (lock->slock)
-		     :
-		     : "memory", "cc");
-}
-#else
-#define TICKET_SHIFT 16
-
-static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
-{
-	int inc = 0x00010000;
-	int tmp;
-
-	asm volatile(LOCK_PREFIX "xaddl %0, %1\n"
-		     "movzwl %w0, %2\n\t"
-		     "shrl $16, %0\n\t"
-		     "1:\t"
-		     "cmpl %0, %2\n\t"
-		     "je 2f\n\t"
-		     "rep ; nop\n\t"
-		     "movzwl %1, %2\n\t"
-		     /* don't need lfence here, because loads are in-order */
-		     "jmp 1b\n"
-		     "2:"
-		     : "+r" (inc), "+m" (lock->slock), "=&r" (tmp)
-		     :
-		     : "memory", "cc");
-}
-
-static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock)
-{
-	int tmp;
-	int new;
-
-	asm volatile("movl %2,%0\n\t"
-		     "movl %0,%1\n\t"
-		     "roll $16, %0\n\t"
-		     "cmpl %0,%1\n\t"
-		     "leal 0x00010000(%" REG_PTR_MODE "0), %1\n\t"
-		     "jne 1f\n\t"
-		     LOCK_PREFIX "cmpxchgl %1,%2\n\t"
-		     "1:"
-		     "sete %b1\n\t"
-		     "movzbl %b1,%0\n\t"
-		     : "=&a" (tmp), "=&q" (new), "+m" (lock->slock)
-		     :
-		     : "memory", "cc");
-
-	return tmp;
-}
-
-static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock)
-{
-	asm volatile(UNLOCK_LOCK_PREFIX "incw %0"
-		     : "+m" (lock->slock)
-		     :
-		     : "memory", "cc");
-}
-#endif
-
-static inline int __ticket_spin_is_locked(raw_spinlock_t *lock)
-{
-	int tmp = ACCESS_ONCE(lock->slock);
-
-	return !!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1 << TICKET_SHIFT) - 1));
-}
-
-static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
-{
-	int tmp = ACCESS_ONCE(lock->slock);
-
-	return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1;
-}
-
-#ifdef CONFIG_PARAVIRT
-/*
- * Define virtualization-friendly old-style lock byte lock, for use in
- * pv_lock_ops if desired.
- *
- * This differs from the pre-2.6.24 spinlock by always using xchgb
- * rather than decb to take the lock; this allows it to use a
- * zero-initialized lock structure.  It also maintains a 1-byte
- * contention counter, so that we can implement
- * __byte_spin_is_contended.
- */
-struct __byte_spinlock {
-	s8 lock;
-	s8 spinners;
-};
-
-static inline int __byte_spin_is_locked(raw_spinlock_t *lock)
-{
-	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
-	return bl->lock != 0;
-}
-
-static inline int __byte_spin_is_contended(raw_spinlock_t *lock)
-{
-	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
-	return bl->spinners != 0;
-}
-
-static inline void __byte_spin_lock(raw_spinlock_t *lock)
-{
-	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
-	s8 val = 1;
-
-	asm("1: xchgb %1, %0\n"
-	    "   test %1,%1\n"
-	    "   jz 3f\n"
-	    "   " LOCK_PREFIX "incb %2\n"
-	    "2: rep;nop\n"
-	    "   cmpb $1, %0\n"
-	    "   je 2b\n"
-	    "   " LOCK_PREFIX "decb %2\n"
-	    "   jmp 1b\n"
-	    "3:"
-	    : "+m" (bl->lock), "+q" (val), "+m" (bl->spinners): : "memory");
-}
-
-static inline int __byte_spin_trylock(raw_spinlock_t *lock)
-{
-	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
-	u8 old = 1;
-
-	asm("xchgb %1,%0"
-	    : "+m" (bl->lock), "+q" (old) : : "memory");
-
-	return old == 0;
-}
-
-static inline void __byte_spin_unlock(raw_spinlock_t *lock)
-{
-	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
-	smp_wmb();
-	bl->lock = 0;
-}
-#else  /* !CONFIG_PARAVIRT */
-static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
-{
-	return __ticket_spin_is_locked(lock);
-}
-
-static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
-{
-	return __ticket_spin_is_contended(lock);
-}
-
-static __always_inline void __raw_spin_lock(raw_spinlock_t *lock)
-{
-	__ticket_spin_lock(lock);
-}
-
-static __always_inline int __raw_spin_trylock(raw_spinlock_t *lock)
-{
-	return __ticket_spin_trylock(lock);
-}
-
-static __always_inline void __raw_spin_unlock(raw_spinlock_t *lock)
-{
-	__ticket_spin_unlock(lock);
-}
-
-static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
-						  unsigned long flags)
-{
-	__raw_spin_lock(lock);
-}
-
-#endif	/* CONFIG_PARAVIRT */
-
-static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
-{
-	while (__raw_spin_is_locked(lock))
-		cpu_relax();
-}
-
-/*
- * Read-write spinlocks, allowing multiple readers
- * but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts
- * but no interrupt writers. For those circumstances we
- * can "mix" irq-safe locks - any writer needs to get a
- * irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- *
- * On x86, we implement read-write locks as a 32-bit counter
- * with the high bit (sign) being the "contended" bit.
- */
-
-/**
- * read_can_lock - would read_trylock() succeed?
- * @lock: the rwlock in question.
- */
-static inline int __raw_read_can_lock(raw_rwlock_t *lock)
-{
-	return (int)(lock)->lock > 0;
-}
-
-/**
- * write_can_lock - would write_trylock() succeed?
- * @lock: the rwlock in question.
- */
-static inline int __raw_write_can_lock(raw_rwlock_t *lock)
-{
-	return (lock)->lock == RW_LOCK_BIAS;
-}
-
-static inline void __raw_read_lock(raw_rwlock_t *rw)
-{
-	asm volatile(LOCK_PREFIX " subl $1,(%0)\n\t"
-		     "jns 1f\n"
-		     "call __read_lock_failed\n\t"
-		     "1:\n"
-		     ::LOCK_PTR_REG (rw) : "memory");
-}
-
-static inline void __raw_write_lock(raw_rwlock_t *rw)
-{
-	asm volatile(LOCK_PREFIX " subl %1,(%0)\n\t"
-		     "jz 1f\n"
-		     "call __write_lock_failed\n\t"
-		     "1:\n"
-		     ::LOCK_PTR_REG (rw), "i" (RW_LOCK_BIAS) : "memory");
-}
-
-static inline int __raw_read_trylock(raw_rwlock_t *lock)
-{
-	atomic_t *count = (atomic_t *)lock;
-
-	atomic_dec(count);
-	if (atomic_read(count) >= 0)
-		return 1;
-	atomic_inc(count);
-	return 0;
-}
-
-static inline int __raw_write_trylock(raw_rwlock_t *lock)
-{
-	atomic_t *count = (atomic_t *)lock;
-
-	if (atomic_sub_and_test(RW_LOCK_BIAS, count))
-		return 1;
-	atomic_add(RW_LOCK_BIAS, count);
-	return 0;
-}
-
-static inline void __raw_read_unlock(raw_rwlock_t *rw)
-{
-	asm volatile(LOCK_PREFIX "incl %0" :"+m" (rw->lock) : : "memory");
-}
-
-static inline void __raw_write_unlock(raw_rwlock_t *rw)
-{
-	asm volatile(LOCK_PREFIX "addl %1, %0"
-		     : "+m" (rw->lock) : "i" (RW_LOCK_BIAS) : "memory");
-}
-
-#define _raw_spin_relax(lock)	cpu_relax()
-#define _raw_read_relax(lock)	cpu_relax()
-#define _raw_write_relax(lock)	cpu_relax()
-
-#endif /* ASM_X86__SPINLOCK_H */
diff --git a/include/asm-x86/spinlock_types.h b/include/asm-x86/spinlock_types.h
deleted file mode 100644
index 6aa9b56..0000000
--- a/include/asm-x86/spinlock_types.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef ASM_X86__SPINLOCK_TYPES_H
-#define ASM_X86__SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
-#endif
-
-typedef struct raw_spinlock {
-	unsigned int slock;
-} raw_spinlock_t;
-
-#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
-
-typedef struct {
-	unsigned int lock;
-} raw_rwlock_t;
-
-#define __RAW_RW_LOCK_UNLOCKED		{ RW_LOCK_BIAS }
-
-#endif /* ASM_X86__SPINLOCK_TYPES_H */
diff --git a/include/asm-x86/srat.h b/include/asm-x86/srat.h
deleted file mode 100644
index 5363e4f7..0000000
--- a/include/asm-x86/srat.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Some of the code in this file has been gleaned from the 64 bit
- * discontigmem support code base.
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to Pat Gaughen <gone@us.ibm.com>
- */
-
-#ifndef ASM_X86__SRAT_H
-#define ASM_X86__SRAT_H
-
-#ifdef CONFIG_ACPI_NUMA
-extern int get_memcfg_from_srat(void);
-#else
-static inline int get_memcfg_from_srat(void)
-{
-	return 0;
-}
-#endif
-
-#endif /* ASM_X86__SRAT_H */
diff --git a/include/asm-x86/stacktrace.h b/include/asm-x86/stacktrace.h
deleted file mode 100644
index f43517e..0000000
--- a/include/asm-x86/stacktrace.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef ASM_X86__STACKTRACE_H
-#define ASM_X86__STACKTRACE_H
-
-extern int kstack_depth_to_print;
-
-/* Generic stack tracer with callbacks */
-
-struct stacktrace_ops {
-	void (*warning)(void *data, char *msg);
-	/* msg must contain %s for the symbol */
-	void (*warning_symbol)(void *data, char *msg, unsigned long symbol);
-	void (*address)(void *data, unsigned long address, int reliable);
-	/* On negative return stop dumping */
-	int (*stack)(void *data, char *name);
-};
-
-void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp,
-		const struct stacktrace_ops *ops, void *data);
-
-#endif /* ASM_X86__STACKTRACE_H */
diff --git a/include/asm-x86/stat.h b/include/asm-x86/stat.h
deleted file mode 100644
index 1e120f6..0000000
--- a/include/asm-x86/stat.h
+++ /dev/null
@@ -1,114 +0,0 @@
-#ifndef ASM_X86__STAT_H
-#define ASM_X86__STAT_H
-
-#define STAT_HAVE_NSEC 1
-
-#ifdef __i386__
-struct stat {
-	unsigned long  st_dev;
-	unsigned long  st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-	unsigned long  st_rdev;
-	unsigned long  st_size;
-	unsigned long  st_blksize;
-	unsigned long  st_blocks;
-	unsigned long  st_atime;
-	unsigned long  st_atime_nsec;
-	unsigned long  st_mtime;
-	unsigned long  st_mtime_nsec;
-	unsigned long  st_ctime;
-	unsigned long  st_ctime_nsec;
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#define STAT64_HAS_BROKEN_ST_INO	1
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
-	unsigned long long	st_dev;
-	unsigned char	__pad0[4];
-
-	unsigned long	__st_ino;
-
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned long	st_uid;
-	unsigned long	st_gid;
-
-	unsigned long long	st_rdev;
-	unsigned char	__pad3[4];
-
-	long long	st_size;
-	unsigned long	st_blksize;
-
-	/* Number 512-byte blocks allocated. */
-	unsigned long long	st_blocks;
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-
-	unsigned long	st_mtime;
-	unsigned int	st_mtime_nsec;
-
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-
-	unsigned long long	st_ino;
-};
-
-#else /* __i386__ */
-
-struct stat {
-	unsigned long	st_dev;
-	unsigned long	st_ino;
-	unsigned long	st_nlink;
-
-	unsigned int	st_mode;
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-	unsigned int	__pad0;
-	unsigned long	st_rdev;
-	long		st_size;
-	long		st_blksize;
-	long		st_blocks;	/* Number 512-byte blocks allocated. */
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-	unsigned long	st_ctime;
-	unsigned long   st_ctime_nsec;
-	long		__unused[3];
-};
-#endif
-
-/* for 32bit emulation and 32 bit kernels */
-struct __old_kernel_stat {
-	unsigned short st_dev;
-	unsigned short st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-	unsigned short st_rdev;
-#ifdef __i386__
-	unsigned long  st_size;
-	unsigned long  st_atime;
-	unsigned long  st_mtime;
-	unsigned long  st_ctime;
-#else
-	unsigned int  st_size;
-	unsigned int  st_atime;
-	unsigned int  st_mtime;
-	unsigned int  st_ctime;
-#endif
-};
-
-#endif /* ASM_X86__STAT_H */
diff --git a/include/asm-x86/statfs.h b/include/asm-x86/statfs.h
deleted file mode 100644
index ca5dc19..0000000
--- a/include/asm-x86/statfs.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASM_X86__STATFS_H
-#define ASM_X86__STATFS_H
-
-/*
- * We need compat_statfs64 to be packed, because the i386 ABI won't
- * add padding at the end to bring it to a multiple of 8 bytes, but
- * the x86_64 ABI will.
- */
-#define ARCH_PACK_COMPAT_STATFS64 __attribute__((packed,aligned(4)))
-
-#include <asm-generic/statfs.h>
-#endif /* ASM_X86__STATFS_H */
diff --git a/include/asm-x86/string_32.h b/include/asm-x86/string_32.h
deleted file mode 100644
index 487843e..0000000
--- a/include/asm-x86/string_32.h
+++ /dev/null
@@ -1,326 +0,0 @@
-#ifndef ASM_X86__STRING_32_H
-#define ASM_X86__STRING_32_H
-
-#ifdef __KERNEL__
-
-/* Let gcc decide whether to inline or use the out of line functions */
-
-#define __HAVE_ARCH_STRCPY
-extern char *strcpy(char *dest, const char *src);
-
-#define __HAVE_ARCH_STRNCPY
-extern char *strncpy(char *dest, const char *src, size_t count);
-
-#define __HAVE_ARCH_STRCAT
-extern char *strcat(char *dest, const char *src);
-
-#define __HAVE_ARCH_STRNCAT
-extern char *strncat(char *dest, const char *src, size_t count);
-
-#define __HAVE_ARCH_STRCMP
-extern int strcmp(const char *cs, const char *ct);
-
-#define __HAVE_ARCH_STRNCMP
-extern int strncmp(const char *cs, const char *ct, size_t count);
-
-#define __HAVE_ARCH_STRCHR
-extern char *strchr(const char *s, int c);
-
-#define __HAVE_ARCH_STRLEN
-extern size_t strlen(const char *s);
-
-static __always_inline void *__memcpy(void *to, const void *from, size_t n)
-{
-	int d0, d1, d2;
-	asm volatile("rep ; movsl\n\t"
-		     "movl %4,%%ecx\n\t"
-		     "andl $3,%%ecx\n\t"
-		     "jz 1f\n\t"
-		     "rep ; movsb\n\t"
-		     "1:"
-		     : "=&c" (d0), "=&D" (d1), "=&S" (d2)
-		     : "0" (n / 4), "g" (n), "1" ((long)to), "2" ((long)from)
-		     : "memory");
-	return to;
-}
-
-/*
- * This looks ugly, but the compiler can optimize it totally,
- * as the count is constant.
- */
-static __always_inline void *__constant_memcpy(void *to, const void *from,
-					       size_t n)
-{
-	long esi, edi;
-	if (!n)
-		return to;
-
-	switch (n) {
-	case 1:
-		*(char *)to = *(char *)from;
-		return to;
-	case 2:
-		*(short *)to = *(short *)from;
-		return to;
-	case 4:
-		*(int *)to = *(int *)from;
-		return to;
-
-	case 3:
-		*(short *)to = *(short *)from;
-		*((char *)to + 2) = *((char *)from + 2);
-		return to;
-	case 5:
-		*(int *)to = *(int *)from;
-		*((char *)to + 4) = *((char *)from + 4);
-		return to;
-	case 6:
-		*(int *)to = *(int *)from;
-		*((short *)to + 2) = *((short *)from + 2);
-		return to;
-	case 8:
-		*(int *)to = *(int *)from;
-		*((int *)to + 1) = *((int *)from + 1);
-		return to;
-	}
-
-	esi = (long)from;
-	edi = (long)to;
-	if (n >= 5 * 4) {
-		/* large block: use rep prefix */
-		int ecx;
-		asm volatile("rep ; movsl"
-			     : "=&c" (ecx), "=&D" (edi), "=&S" (esi)
-			     : "0" (n / 4), "1" (edi), "2" (esi)
-			     : "memory"
-		);
-	} else {
-		/* small block: don't clobber ecx + smaller code */
-		if (n >= 4 * 4)
-			asm volatile("movsl"
-				     : "=&D"(edi), "=&S"(esi)
-				     : "0"(edi), "1"(esi)
-				     : "memory");
-		if (n >= 3 * 4)
-			asm volatile("movsl"
-				     : "=&D"(edi), "=&S"(esi)
-				     : "0"(edi), "1"(esi)
-				     : "memory");
-		if (n >= 2 * 4)
-			asm volatile("movsl"
-				     : "=&D"(edi), "=&S"(esi)
-				     : "0"(edi), "1"(esi)
-				     : "memory");
-		if (n >= 1 * 4)
-			asm volatile("movsl"
-				     : "=&D"(edi), "=&S"(esi)
-				     : "0"(edi), "1"(esi)
-				     : "memory");
-	}
-	switch (n % 4) {
-		/* tail */
-	case 0:
-		return to;
-	case 1:
-		asm volatile("movsb"
-			     : "=&D"(edi), "=&S"(esi)
-			     : "0"(edi), "1"(esi)
-			     : "memory");
-		return to;
-	case 2:
-		asm volatile("movsw"
-			     : "=&D"(edi), "=&S"(esi)
-			     : "0"(edi), "1"(esi)
-			     : "memory");
-		return to;
-	default:
-		asm volatile("movsw\n\tmovsb"
-			     : "=&D"(edi), "=&S"(esi)
-			     : "0"(edi), "1"(esi)
-			     : "memory");
-		return to;
-	}
-}
-
-#define __HAVE_ARCH_MEMCPY
-
-#ifdef CONFIG_X86_USE_3DNOW
-
-#include <asm/mmx.h>
-
-/*
- *	This CPU favours 3DNow strongly (eg AMD Athlon)
- */
-
-static inline void *__constant_memcpy3d(void *to, const void *from, size_t len)
-{
-	if (len < 512)
-		return __constant_memcpy(to, from, len);
-	return _mmx_memcpy(to, from, len);
-}
-
-static inline void *__memcpy3d(void *to, const void *from, size_t len)
-{
-	if (len < 512)
-		return __memcpy(to, from, len);
-	return _mmx_memcpy(to, from, len);
-}
-
-#define memcpy(t, f, n)				\
-	(__builtin_constant_p((n))		\
-	 ? __constant_memcpy3d((t), (f), (n))	\
-	 : __memcpy3d((t), (f), (n)))
-
-#else
-
-/*
- *	No 3D Now!
- */
-
-#define memcpy(t, f, n)				\
-	(__builtin_constant_p((n))		\
-	 ? __constant_memcpy((t), (f), (n))	\
-	 : __memcpy((t), (f), (n)))
-
-#endif
-
-#define __HAVE_ARCH_MEMMOVE
-void *memmove(void *dest, const void *src, size_t n);
-
-#define memcmp __builtin_memcmp
-
-#define __HAVE_ARCH_MEMCHR
-extern void *memchr(const void *cs, int c, size_t count);
-
-static inline void *__memset_generic(void *s, char c, size_t count)
-{
-	int d0, d1;
-	asm volatile("rep\n\t"
-		     "stosb"
-		     : "=&c" (d0), "=&D" (d1)
-		     : "a" (c), "1" (s), "0" (count)
-		     : "memory");
-	return s;
-}
-
-/* we might want to write optimized versions of these later */
-#define __constant_count_memset(s, c, count) __memset_generic((s), (c), (count))
-
-/*
- * memset(x, 0, y) is a reasonably common thing to do, so we want to fill
- * things 32 bits at a time even when we don't know the size of the
- * area at compile-time..
- */
-static __always_inline
-void *__constant_c_memset(void *s, unsigned long c, size_t count)
-{
-	int d0, d1;
-	asm volatile("rep ; stosl\n\t"
-		     "testb $2,%b3\n\t"
-		     "je 1f\n\t"
-		     "stosw\n"
-		     "1:\ttestb $1,%b3\n\t"
-		     "je 2f\n\t"
-		     "stosb\n"
-		     "2:"
-		     : "=&c" (d0), "=&D" (d1)
-		     : "a" (c), "q" (count), "0" (count/4), "1" ((long)s)
-		     : "memory");
-	return s;
-}
-
-/* Added by Gertjan van Wingerde to make minix and sysv module work */
-#define __HAVE_ARCH_STRNLEN
-extern size_t strnlen(const char *s, size_t count);
-/* end of additional stuff */
-
-#define __HAVE_ARCH_STRSTR
-extern char *strstr(const char *cs, const char *ct);
-
-/*
- * This looks horribly ugly, but the compiler can optimize it totally,
- * as we by now know that both pattern and count is constant..
- */
-static __always_inline
-void *__constant_c_and_count_memset(void *s, unsigned long pattern,
-				    size_t count)
-{
-	switch (count) {
-	case 0:
-		return s;
-	case 1:
-		*(unsigned char *)s = pattern & 0xff;
-		return s;
-	case 2:
-		*(unsigned short *)s = pattern & 0xffff;
-		return s;
-	case 3:
-		*(unsigned short *)s = pattern & 0xffff;
-		*((unsigned char *)s + 2) = pattern & 0xff;
-		return s;
-	case 4:
-		*(unsigned long *)s = pattern;
-		return s;
-	}
-
-#define COMMON(x)							\
-	asm volatile("rep ; stosl"					\
-		     x							\
-		     : "=&c" (d0), "=&D" (d1)				\
-		     : "a" (eax), "0" (count/4), "1" ((long)s)	\
-		     : "memory")
-
-	{
-		int d0, d1;
-#if __GNUC__ == 4 && __GNUC_MINOR__ == 0
-		/* Workaround for broken gcc 4.0 */
-		register unsigned long eax asm("%eax") = pattern;
-#else
-		unsigned long eax = pattern;
-#endif
-
-		switch (count % 4) {
-		case 0:
-			COMMON("");
-			return s;
-		case 1:
-			COMMON("\n\tstosb");
-			return s;
-		case 2:
-			COMMON("\n\tstosw");
-			return s;
-		default:
-			COMMON("\n\tstosw\n\tstosb");
-			return s;
-		}
-	}
-
-#undef COMMON
-}
-
-#define __constant_c_x_memset(s, c, count)			\
-	(__builtin_constant_p(count)				\
-	 ? __constant_c_and_count_memset((s), (c), (count))	\
-	 : __constant_c_memset((s), (c), (count)))
-
-#define __memset(s, c, count)				\
-	(__builtin_constant_p(count)			\
-	 ? __constant_count_memset((s), (c), (count))	\
-	 : __memset_generic((s), (c), (count)))
-
-#define __HAVE_ARCH_MEMSET
-#define memset(s, c, count)						\
-	(__builtin_constant_p(c)					\
-	 ? __constant_c_x_memset((s), (0x01010101UL * (unsigned char)(c)), \
-				 (count))				\
-	 : __memset((s), (c), (count)))
-
-/*
- * find the first occurrence of byte 'c', or 1 past the area if none
- */
-#define __HAVE_ARCH_MEMSCAN
-extern void *memscan(void *addr, int c, size_t size);
-
-#endif /* __KERNEL__ */
-
-#endif /* ASM_X86__STRING_32_H */
diff --git a/include/asm-x86/string_64.h b/include/asm-x86/string_64.h
deleted file mode 100644
index a2add11d..0000000
--- a/include/asm-x86/string_64.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef ASM_X86__STRING_64_H
-#define ASM_X86__STRING_64_H
-
-#ifdef __KERNEL__
-
-/* Written 2002 by Andi Kleen */
-
-/* Only used for special circumstances. Stolen from i386/string.h */
-static __always_inline void *__inline_memcpy(void *to, const void *from, size_t n)
-{
-	unsigned long d0, d1, d2;
-	asm volatile("rep ; movsl\n\t"
-		     "testb $2,%b4\n\t"
-		     "je 1f\n\t"
-		     "movsw\n"
-		     "1:\ttestb $1,%b4\n\t"
-		     "je 2f\n\t"
-		     "movsb\n"
-		     "2:"
-		     : "=&c" (d0), "=&D" (d1), "=&S" (d2)
-		     : "0" (n / 4), "q" (n), "1" ((long)to), "2" ((long)from)
-		     : "memory");
-	return to;
-}
-
-/* Even with __builtin_ the compiler may decide to use the out of line
-   function. */
-
-#define __HAVE_ARCH_MEMCPY 1
-#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
-extern void *memcpy(void *to, const void *from, size_t len);
-#else
-extern void *__memcpy(void *to, const void *from, size_t len);
-#define memcpy(dst, src, len)					\
-({								\
-	size_t __len = (len);					\
-	void *__ret;						\
-	if (__builtin_constant_p(len) && __len >= 64)		\
-		__ret = __memcpy((dst), (src), __len);		\
-	else							\
-		__ret = __builtin_memcpy((dst), (src), __len);	\
-	__ret;							\
-})
-#endif
-
-#define __HAVE_ARCH_MEMSET
-void *memset(void *s, int c, size_t n);
-
-#define __HAVE_ARCH_MEMMOVE
-void *memmove(void *dest, const void *src, size_t count);
-
-int memcmp(const void *cs, const void *ct, size_t count);
-size_t strlen(const char *s);
-char *strcpy(char *dest, const char *src);
-char *strcat(char *dest, const char *src);
-int strcmp(const char *cs, const char *ct);
-
-#endif /* __KERNEL__ */
-
-#endif /* ASM_X86__STRING_64_H */
diff --git a/include/asm-x86/suspend_32.h b/include/asm-x86/suspend_32.h
deleted file mode 100644
index acb6d4d..0000000
--- a/include/asm-x86/suspend_32.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright 2001-2002 Pavel Machek <pavel@suse.cz>
- * Based on code
- * Copyright 2001 Patrick Mochel <mochel@osdl.org>
- */
-#ifndef ASM_X86__SUSPEND_32_H
-#define ASM_X86__SUSPEND_32_H
-
-#include <asm/desc.h>
-#include <asm/i387.h>
-
-static inline int arch_prepare_suspend(void) { return 0; }
-
-/* image of the saved processor state */
-struct saved_context {
-	u16 es, fs, gs, ss;
-	unsigned long cr0, cr2, cr3, cr4;
-	struct desc_ptr gdt;
-	struct desc_ptr idt;
-	u16 ldt;
-	u16 tss;
-	unsigned long tr;
-	unsigned long safety;
-	unsigned long return_address;
-} __attribute__((packed));
-
-#ifdef CONFIG_ACPI
-extern unsigned long saved_eip;
-extern unsigned long saved_esp;
-extern unsigned long saved_ebp;
-extern unsigned long saved_ebx;
-extern unsigned long saved_esi;
-extern unsigned long saved_edi;
-
-static inline void acpi_save_register_state(unsigned long return_point)
-{
-	saved_eip = return_point;
-	asm volatile("movl %%esp,%0" : "=m" (saved_esp));
-	asm volatile("movl %%ebp,%0" : "=m" (saved_ebp));
-	asm volatile("movl %%ebx,%0" : "=m" (saved_ebx));
-	asm volatile("movl %%edi,%0" : "=m" (saved_edi));
-	asm volatile("movl %%esi,%0" : "=m" (saved_esi));
-}
-
-#define acpi_restore_register_state()  do {} while (0)
-
-/* routines for saving/restoring kernel state */
-extern int acpi_save_state_mem(void);
-#endif
-
-#endif /* ASM_X86__SUSPEND_32_H */
diff --git a/include/asm-x86/suspend_64.h b/include/asm-x86/suspend_64.h
deleted file mode 100644
index cf821dd..0000000
--- a/include/asm-x86/suspend_64.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright 2001-2003 Pavel Machek <pavel@suse.cz>
- * Based on code
- * Copyright 2001 Patrick Mochel <mochel@osdl.org>
- */
-#ifndef ASM_X86__SUSPEND_64_H
-#define ASM_X86__SUSPEND_64_H
-
-#include <asm/desc.h>
-#include <asm/i387.h>
-
-static inline int arch_prepare_suspend(void)
-{
-	return 0;
-}
-
-/*
- * Image of the saved processor state, used by the low level ACPI suspend to
- * RAM code and by the low level hibernation code.
- *
- * If you modify it, fix arch/x86/kernel/acpi/wakeup_64.S and make sure that
- * __save/__restore_processor_state(), defined in arch/x86/kernel/suspend_64.c,
- * still work as required.
- */
-struct saved_context {
-	struct pt_regs regs;
-	u16 ds, es, fs, gs, ss;
-	unsigned long gs_base, gs_kernel_base, fs_base;
-	unsigned long cr0, cr2, cr3, cr4, cr8;
-	unsigned long efer;
-	u16 gdt_pad;
-	u16 gdt_limit;
-	unsigned long gdt_base;
-	u16 idt_pad;
-	u16 idt_limit;
-	unsigned long idt_base;
-	u16 ldt;
-	u16 tss;
-	unsigned long tr;
-	unsigned long safety;
-	unsigned long return_address;
-} __attribute__((packed));
-
-#define loaddebug(thread,register) \
-	set_debugreg((thread)->debugreg##register, register)
-
-/* routines for saving/restoring kernel state */
-extern int acpi_save_state_mem(void);
-extern char core_restore_code;
-extern char restore_registers;
-
-#endif /* ASM_X86__SUSPEND_64_H */
diff --git a/include/asm-x86/swiotlb.h b/include/asm-x86/swiotlb.h
deleted file mode 100644
index 1e20adb..0000000
--- a/include/asm-x86/swiotlb.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef ASM_X86__SWIOTLB_H
-#define ASM_X86__SWIOTLB_H
-
-#include <asm/dma-mapping.h>
-
-/* SWIOTLB interface */
-
-extern dma_addr_t swiotlb_map_single(struct device *hwdev, void *ptr,
-				     size_t size, int dir);
-extern void *swiotlb_alloc_coherent(struct device *hwdev, size_t size,
-				    dma_addr_t *dma_handle, gfp_t flags);
-extern void swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr,
-				 size_t size, int dir);
-extern void swiotlb_sync_single_for_cpu(struct device *hwdev,
-					dma_addr_t dev_addr,
-					size_t size, int dir);
-extern void swiotlb_sync_single_for_device(struct device *hwdev,
-					   dma_addr_t dev_addr,
-					   size_t size, int dir);
-extern void swiotlb_sync_single_range_for_cpu(struct device *hwdev,
-					      dma_addr_t dev_addr,
-					      unsigned long offset,
-					      size_t size, int dir);
-extern void swiotlb_sync_single_range_for_device(struct device *hwdev,
-						 dma_addr_t dev_addr,
-						 unsigned long offset,
-						 size_t size, int dir);
-extern void swiotlb_sync_sg_for_cpu(struct device *hwdev,
-				    struct scatterlist *sg, int nelems,
-				    int dir);
-extern void swiotlb_sync_sg_for_device(struct device *hwdev,
-				       struct scatterlist *sg, int nelems,
-				       int dir);
-extern int swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg,
-			  int nents, int direction);
-extern void swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg,
-			     int nents, int direction);
-extern int swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr);
-extern void swiotlb_free_coherent(struct device *hwdev, size_t size,
-				  void *vaddr, dma_addr_t dma_handle);
-extern int swiotlb_dma_supported(struct device *hwdev, u64 mask);
-extern void swiotlb_init(void);
-
-extern int swiotlb_force;
-
-#ifdef CONFIG_SWIOTLB
-extern int swiotlb;
-extern void pci_swiotlb_init(void);
-#else
-#define swiotlb 0
-static inline void pci_swiotlb_init(void)
-{
-}
-#endif
-
-static inline void dma_mark_clean(void *addr, size_t size) {}
-
-#endif /* ASM_X86__SWIOTLB_H */
diff --git a/include/asm-x86/sync_bitops.h b/include/asm-x86/sync_bitops.h
deleted file mode 100644
index b689bee..0000000
--- a/include/asm-x86/sync_bitops.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef ASM_X86__SYNC_BITOPS_H
-#define ASM_X86__SYNC_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-/*
- * These have to be done with inline assembly: that way the bit-setting
- * is guaranteed to be atomic. All bit operations return 0 if the bit
- * was cleared before the operation and != 0 if it was not.
- *
- * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
- */
-
-#define ADDR (*(volatile long *)addr)
-
-/**
- * sync_set_bit - Atomically set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * This function is atomic and may not be reordered.  See __set_bit()
- * if you do not require the atomic guarantees.
- *
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static inline void sync_set_bit(int nr, volatile unsigned long *addr)
-{
-	asm volatile("lock; btsl %1,%0"
-		     : "+m" (ADDR)
-		     : "Ir" (nr)
-		     : "memory");
-}
-
-/**
- * sync_clear_bit - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * sync_clear_bit() is atomic and may not be reordered.  However, it does
- * not contain a memory barrier, so if it is used for locking purposes,
- * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
- * in order to ensure changes are visible on other processors.
- */
-static inline void sync_clear_bit(int nr, volatile unsigned long *addr)
-{
-	asm volatile("lock; btrl %1,%0"
-		     : "+m" (ADDR)
-		     : "Ir" (nr)
-		     : "memory");
-}
-
-/**
- * sync_change_bit - Toggle a bit in memory
- * @nr: Bit to change
- * @addr: Address to start counting from
- *
- * sync_change_bit() is atomic and may not be reordered.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static inline void sync_change_bit(int nr, volatile unsigned long *addr)
-{
-	asm volatile("lock; btcl %1,%0"
-		     : "+m" (ADDR)
-		     : "Ir" (nr)
-		     : "memory");
-}
-
-/**
- * sync_test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static inline int sync_test_and_set_bit(int nr, volatile unsigned long *addr)
-{
-	int oldbit;
-
-	asm volatile("lock; btsl %2,%1\n\tsbbl %0,%0"
-		     : "=r" (oldbit), "+m" (ADDR)
-		     : "Ir" (nr) : "memory");
-	return oldbit;
-}
-
-/**
- * sync_test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static inline int sync_test_and_clear_bit(int nr, volatile unsigned long *addr)
-{
-	int oldbit;
-
-	asm volatile("lock; btrl %2,%1\n\tsbbl %0,%0"
-		     : "=r" (oldbit), "+m" (ADDR)
-		     : "Ir" (nr) : "memory");
-	return oldbit;
-}
-
-/**
- * sync_test_and_change_bit - Change a bit and return its old value
- * @nr: Bit to change
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static inline int sync_test_and_change_bit(int nr, volatile unsigned long *addr)
-{
-	int oldbit;
-
-	asm volatile("lock; btcl %2,%1\n\tsbbl %0,%0"
-		     : "=r" (oldbit), "+m" (ADDR)
-		     : "Ir" (nr) : "memory");
-	return oldbit;
-}
-
-#define sync_test_bit(nr, addr) test_bit(nr, addr)
-
-#undef ADDR
-
-#endif /* ASM_X86__SYNC_BITOPS_H */
diff --git a/include/asm-x86/syscall.h b/include/asm-x86/syscall.h
deleted file mode 100644
index 04c47dc..0000000
--- a/include/asm-x86/syscall.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * Access to user system call parameters and results
- *
- * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- *
- * See asm-generic/syscall.h for descriptions of what we must do here.
- */
-
-#ifndef _ASM_SYSCALL_H
-#define _ASM_SYSCALL_H	1
-
-#include <linux/sched.h>
-#include <linux/err.h>
-
-static inline long syscall_get_nr(struct task_struct *task,
-				  struct pt_regs *regs)
-{
-	/*
-	 * We always sign-extend a -1 value being set here,
-	 * so this is always either -1L or a syscall number.
-	 */
-	return regs->orig_ax;
-}
-
-static inline void syscall_rollback(struct task_struct *task,
-				    struct pt_regs *regs)
-{
-	regs->ax = regs->orig_ax;
-}
-
-static inline long syscall_get_error(struct task_struct *task,
-				     struct pt_regs *regs)
-{
-	unsigned long error = regs->ax;
-#ifdef CONFIG_IA32_EMULATION
-	/*
-	 * TS_COMPAT is set for 32-bit syscall entries and then
-	 * remains set until we return to user mode.
-	 */
-	if (task_thread_info(task)->status & TS_COMPAT)
-		/*
-		 * Sign-extend the value so (int)-EFOO becomes (long)-EFOO
-		 * and will match correctly in comparisons.
-		 */
-		error = (long) (int) error;
-#endif
-	return IS_ERR_VALUE(error) ? error : 0;
-}
-
-static inline long syscall_get_return_value(struct task_struct *task,
-					    struct pt_regs *regs)
-{
-	return regs->ax;
-}
-
-static inline void syscall_set_return_value(struct task_struct *task,
-					    struct pt_regs *regs,
-					    int error, long val)
-{
-	regs->ax = (long) error ?: val;
-}
-
-#ifdef CONFIG_X86_32
-
-static inline void syscall_get_arguments(struct task_struct *task,
-					 struct pt_regs *regs,
-					 unsigned int i, unsigned int n,
-					 unsigned long *args)
-{
-	BUG_ON(i + n > 6);
-	memcpy(args, &regs->bx + i, n * sizeof(args[0]));
-}
-
-static inline void syscall_set_arguments(struct task_struct *task,
-					 struct pt_regs *regs,
-					 unsigned int i, unsigned int n,
-					 const unsigned long *args)
-{
-	BUG_ON(i + n > 6);
-	memcpy(&regs->bx + i, args, n * sizeof(args[0]));
-}
-
-#else	 /* CONFIG_X86_64 */
-
-static inline void syscall_get_arguments(struct task_struct *task,
-					 struct pt_regs *regs,
-					 unsigned int i, unsigned int n,
-					 unsigned long *args)
-{
-# ifdef CONFIG_IA32_EMULATION
-	if (task_thread_info(task)->status & TS_COMPAT)
-		switch (i + n) {
-		case 6:
-			if (!n--) break;
-			*args++ = regs->bp;
-		case 5:
-			if (!n--) break;
-			*args++ = regs->di;
-		case 4:
-			if (!n--) break;
-			*args++ = regs->si;
-		case 3:
-			if (!n--) break;
-			*args++ = regs->dx;
-		case 2:
-			if (!n--) break;
-			*args++ = regs->cx;
-		case 1:
-			if (!n--) break;
-			*args++ = regs->bx;
-		case 0:
-			if (!n--) break;
-		default:
-			BUG();
-			break;
-		}
-	else
-# endif
-		switch (i + n) {
-		case 6:
-			if (!n--) break;
-			*args++ = regs->r9;
-		case 5:
-			if (!n--) break;
-			*args++ = regs->r8;
-		case 4:
-			if (!n--) break;
-			*args++ = regs->r10;
-		case 3:
-			if (!n--) break;
-			*args++ = regs->dx;
-		case 2:
-			if (!n--) break;
-			*args++ = regs->si;
-		case 1:
-			if (!n--) break;
-			*args++ = regs->di;
-		case 0:
-			if (!n--) break;
-		default:
-			BUG();
-			break;
-		}
-}
-
-static inline void syscall_set_arguments(struct task_struct *task,
-					 struct pt_regs *regs,
-					 unsigned int i, unsigned int n,
-					 const unsigned long *args)
-{
-# ifdef CONFIG_IA32_EMULATION
-	if (task_thread_info(task)->status & TS_COMPAT)
-		switch (i + n) {
-		case 6:
-			if (!n--) break;
-			regs->bp = *args++;
-		case 5:
-			if (!n--) break;
-			regs->di = *args++;
-		case 4:
-			if (!n--) break;
-			regs->si = *args++;
-		case 3:
-			if (!n--) break;
-			regs->dx = *args++;
-		case 2:
-			if (!n--) break;
-			regs->cx = *args++;
-		case 1:
-			if (!n--) break;
-			regs->bx = *args++;
-		case 0:
-			if (!n--) break;
-		default:
-			BUG();
-		}
-	else
-# endif
-		switch (i + n) {
-		case 6:
-			if (!n--) break;
-			regs->r9 = *args++;
-		case 5:
-			if (!n--) break;
-			regs->r8 = *args++;
-		case 4:
-			if (!n--) break;
-			regs->r10 = *args++;
-		case 3:
-			if (!n--) break;
-			regs->dx = *args++;
-		case 2:
-			if (!n--) break;
-			regs->si = *args++;
-		case 1:
-			if (!n--) break;
-			regs->di = *args++;
-		case 0:
-			if (!n--) break;
-		default:
-			BUG();
-		}
-}
-
-#endif	/* CONFIG_X86_32 */
-
-#endif	/* _ASM_SYSCALL_H */
diff --git a/include/asm-x86/system.h b/include/asm-x86/system.h
deleted file mode 100644
index b20c894..0000000
--- a/include/asm-x86/system.h
+++ /dev/null
@@ -1,425 +0,0 @@
-#ifndef ASM_X86__SYSTEM_H
-#define ASM_X86__SYSTEM_H
-
-#include <asm/asm.h>
-#include <asm/segment.h>
-#include <asm/cpufeature.h>
-#include <asm/cmpxchg.h>
-#include <asm/nops.h>
-
-#include <linux/kernel.h>
-#include <linux/irqflags.h>
-
-/* entries in ARCH_DLINFO: */
-#ifdef CONFIG_IA32_EMULATION
-# define AT_VECTOR_SIZE_ARCH 2
-#else
-# define AT_VECTOR_SIZE_ARCH 1
-#endif
-
-#ifdef CONFIG_X86_32
-
-struct task_struct; /* one of the stranger aspects of C forward declarations */
-struct task_struct *__switch_to(struct task_struct *prev,
-				struct task_struct *next);
-
-/*
- * Saving eflags is important. It switches not only IOPL between tasks,
- * it also protects other tasks from NT leaking through sysenter etc.
- */
-#define switch_to(prev, next, last)					\
-do {									\
-	/*								\
-	 * Context-switching clobbers all registers, so we clobber	\
-	 * them explicitly, via unused output variables.		\
-	 * (EAX and EBP is not listed because EBP is saved/restored	\
-	 * explicitly for wchan access and EAX is the return value of	\
-	 * __switch_to())						\
-	 */								\
-	unsigned long ebx, ecx, edx, esi, edi;				\
-									\
-	asm volatile("pushfl\n\t"		/* save    flags */	\
-		     "pushl %%ebp\n\t"		/* save    EBP   */	\
-		     "movl %%esp,%[prev_sp]\n\t"	/* save    ESP   */ \
-		     "movl %[next_sp],%%esp\n\t"	/* restore ESP   */ \
-		     "movl $1f,%[prev_ip]\n\t"	/* save    EIP   */	\
-		     "pushl %[next_ip]\n\t"	/* restore EIP   */	\
-		     "jmp __switch_to\n"	/* regparm call  */	\
-		     "1:\t"						\
-		     "popl %%ebp\n\t"		/* restore EBP   */	\
-		     "popfl\n"			/* restore flags */	\
-									\
-		     /* output parameters */				\
-		     : [prev_sp] "=m" (prev->thread.sp),		\
-		       [prev_ip] "=m" (prev->thread.ip),		\
-		       "=a" (last),					\
-									\
-		       /* clobbered output registers: */		\
-		       "=b" (ebx), "=c" (ecx), "=d" (edx),		\
-		       "=S" (esi), "=D" (edi)				\
-		       							\
-		       /* input parameters: */				\
-		     : [next_sp]  "m" (next->thread.sp),		\
-		       [next_ip]  "m" (next->thread.ip),		\
-		       							\
-		       /* regparm parameters for __switch_to(): */	\
-		       [prev]     "a" (prev),				\
-		       [next]     "d" (next)				\
-									\
-		     : /* reloaded segment registers */			\
-			"memory");					\
-} while (0)
-
-/*
- * disable hlt during certain critical i/o operations
- */
-#define HAVE_DISABLE_HLT
-#else
-#define __SAVE(reg, offset) "movq %%" #reg ",(14-" #offset ")*8(%%rsp)\n\t"
-#define __RESTORE(reg, offset) "movq (14-" #offset ")*8(%%rsp),%%" #reg "\n\t"
-
-/* frame pointer must be last for get_wchan */
-#define SAVE_CONTEXT    "pushf ; pushq %%rbp ; movq %%rsi,%%rbp\n\t"
-#define RESTORE_CONTEXT "movq %%rbp,%%rsi ; popq %%rbp ; popf\t"
-
-#define __EXTRA_CLOBBER  \
-	, "rcx", "rbx", "rdx", "r8", "r9", "r10", "r11", \
-	  "r12", "r13", "r14", "r15"
-
-/* Save restore flags to clear handle leaking NT */
-#define switch_to(prev, next, last) \
-	asm volatile(SAVE_CONTEXT						    \
-	     "movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */	  \
-	     "movq %P[threadrsp](%[next]),%%rsp\n\t" /* restore RSP */	  \
-	     "call __switch_to\n\t"					  \
-	     ".globl thread_return\n"					  \
-	     "thread_return:\n\t"					  \
-	     "movq %%gs:%P[pda_pcurrent],%%rsi\n\t"			  \
-	     "movq %P[thread_info](%%rsi),%%r8\n\t"			  \
-	     LOCK_PREFIX "btr  %[tif_fork],%P[ti_flags](%%r8)\n\t"	  \
-	     "movq %%rax,%%rdi\n\t" 					  \
-	     "jc   ret_from_fork\n\t"					  \
-	     RESTORE_CONTEXT						  \
-	     : "=a" (last)					  	  \
-	     : [next] "S" (next), [prev] "D" (prev),			  \
-	       [threadrsp] "i" (offsetof(struct task_struct, thread.sp)), \
-	       [ti_flags] "i" (offsetof(struct thread_info, flags)),	  \
-	       [tif_fork] "i" (TIF_FORK),			  	  \
-	       [thread_info] "i" (offsetof(struct task_struct, stack)),   \
-	       [pda_pcurrent] "i" (offsetof(struct x8664_pda, pcurrent))  \
-	     : "memory", "cc" __EXTRA_CLOBBER)
-#endif
-
-#ifdef __KERNEL__
-#define _set_base(addr, base) do { unsigned long __pr; \
-__asm__ __volatile__ ("movw %%dx,%1\n\t" \
-	"rorl $16,%%edx\n\t" \
-	"movb %%dl,%2\n\t" \
-	"movb %%dh,%3" \
-	:"=&d" (__pr) \
-	:"m" (*((addr)+2)), \
-	 "m" (*((addr)+4)), \
-	 "m" (*((addr)+7)), \
-	 "0" (base) \
-	); } while (0)
-
-#define _set_limit(addr, limit) do { unsigned long __lr; \
-__asm__ __volatile__ ("movw %%dx,%1\n\t" \
-	"rorl $16,%%edx\n\t" \
-	"movb %2,%%dh\n\t" \
-	"andb $0xf0,%%dh\n\t" \
-	"orb %%dh,%%dl\n\t" \
-	"movb %%dl,%2" \
-	:"=&d" (__lr) \
-	:"m" (*(addr)), \
-	 "m" (*((addr)+6)), \
-	 "0" (limit) \
-	); } while (0)
-
-#define set_base(ldt, base) _set_base(((char *)&(ldt)) , (base))
-#define set_limit(ldt, limit) _set_limit(((char *)&(ldt)) , ((limit)-1))
-
-extern void native_load_gs_index(unsigned);
-
-/*
- * Load a segment. Fall back on loading the zero
- * segment if something goes wrong..
- */
-#define loadsegment(seg, value)			\
-	asm volatile("\n"			\
-		     "1:\t"			\
-		     "movl %k0,%%" #seg "\n"	\
-		     "2:\n"			\
-		     ".section .fixup,\"ax\"\n"	\
-		     "3:\t"			\
-		     "movl %k1, %%" #seg "\n\t"	\
-		     "jmp 2b\n"			\
-		     ".previous\n"		\
-		     _ASM_EXTABLE(1b,3b)	\
-		     : :"r" (value), "r" (0) : "memory")
-
-
-/*
- * Save a segment register away
- */
-#define savesegment(seg, value)				\
-	asm("mov %%" #seg ",%0":"=r" (value) : : "memory")
-
-static inline unsigned long get_limit(unsigned long segment)
-{
-	unsigned long __limit;
-	asm("lsll %1,%0" : "=r" (__limit) : "r" (segment));
-	return __limit + 1;
-}
-
-static inline void native_clts(void)
-{
-	asm volatile("clts");
-}
-
-/*
- * Volatile isn't enough to prevent the compiler from reordering the
- * read/write functions for the control registers and messing everything up.
- * A memory clobber would solve the problem, but would prevent reordering of
- * all loads stores around it, which can hurt performance. Solution is to
- * use a variable and mimic reads and writes to it to enforce serialization
- */
-static unsigned long __force_order;
-
-static inline unsigned long native_read_cr0(void)
-{
-	unsigned long val;
-	asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order));
-	return val;
-}
-
-static inline void native_write_cr0(unsigned long val)
-{
-	asm volatile("mov %0,%%cr0": : "r" (val), "m" (__force_order));
-}
-
-static inline unsigned long native_read_cr2(void)
-{
-	unsigned long val;
-	asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order));
-	return val;
-}
-
-static inline void native_write_cr2(unsigned long val)
-{
-	asm volatile("mov %0,%%cr2": : "r" (val), "m" (__force_order));
-}
-
-static inline unsigned long native_read_cr3(void)
-{
-	unsigned long val;
-	asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
-	return val;
-}
-
-static inline void native_write_cr3(unsigned long val)
-{
-	asm volatile("mov %0,%%cr3": : "r" (val), "m" (__force_order));
-}
-
-static inline unsigned long native_read_cr4(void)
-{
-	unsigned long val;
-	asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
-	return val;
-}
-
-static inline unsigned long native_read_cr4_safe(void)
-{
-	unsigned long val;
-	/* This could fault if %cr4 does not exist. In x86_64, a cr4 always
-	 * exists, so it will never fail. */
-#ifdef CONFIG_X86_32
-	asm volatile("1: mov %%cr4, %0\n"
-		     "2:\n"
-		     _ASM_EXTABLE(1b, 2b)
-		     : "=r" (val), "=m" (__force_order) : "0" (0));
-#else
-	val = native_read_cr4();
-#endif
-	return val;
-}
-
-static inline void native_write_cr4(unsigned long val)
-{
-	asm volatile("mov %0,%%cr4": : "r" (val), "m" (__force_order));
-}
-
-#ifdef CONFIG_X86_64
-static inline unsigned long native_read_cr8(void)
-{
-	unsigned long cr8;
-	asm volatile("movq %%cr8,%0" : "=r" (cr8));
-	return cr8;
-}
-
-static inline void native_write_cr8(unsigned long val)
-{
-	asm volatile("movq %0,%%cr8" :: "r" (val) : "memory");
-}
-#endif
-
-static inline void native_wbinvd(void)
-{
-	asm volatile("wbinvd": : :"memory");
-}
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define read_cr0()	(native_read_cr0())
-#define write_cr0(x)	(native_write_cr0(x))
-#define read_cr2()	(native_read_cr2())
-#define write_cr2(x)	(native_write_cr2(x))
-#define read_cr3()	(native_read_cr3())
-#define write_cr3(x)	(native_write_cr3(x))
-#define read_cr4()	(native_read_cr4())
-#define read_cr4_safe()	(native_read_cr4_safe())
-#define write_cr4(x)	(native_write_cr4(x))
-#define wbinvd()	(native_wbinvd())
-#ifdef CONFIG_X86_64
-#define read_cr8()	(native_read_cr8())
-#define write_cr8(x)	(native_write_cr8(x))
-#define load_gs_index   native_load_gs_index
-#endif
-
-/* Clear the 'TS' bit */
-#define clts()		(native_clts())
-
-#endif/* CONFIG_PARAVIRT */
-
-#define stts() write_cr0(read_cr0() | X86_CR0_TS)
-
-#endif /* __KERNEL__ */
-
-static inline void clflush(volatile void *__p)
-{
-	asm volatile("clflush %0" : "+m" (*(volatile char __force *)__p));
-}
-
-#define nop() asm volatile ("nop")
-
-void disable_hlt(void);
-void enable_hlt(void);
-
-void cpu_idle_wait(void);
-
-extern unsigned long arch_align_stack(unsigned long sp);
-extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
-
-void default_idle(void);
-
-/*
- * Force strict CPU ordering.
- * And yes, this is required on UP too when we're talking
- * to devices.
- */
-#ifdef CONFIG_X86_32
-/*
- * Some non-Intel clones support out of order store. wmb() ceases to be a
- * nop for these.
- */
-#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
-#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
-#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
-#else
-#define mb() 	asm volatile("mfence":::"memory")
-#define rmb()	asm volatile("lfence":::"memory")
-#define wmb()	asm volatile("sfence" ::: "memory")
-#endif
-
-/**
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier.  All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads.  This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies.  See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	b = 2;
- *	memory_barrier();
- *	p = &b;				q = p;
- *					read_barrier_depends();
- *					d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends().  However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	a = 2;
- *	memory_barrier();
- *	b = 3;				y = b;
- *					read_barrier_depends();
- *					x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b".  Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
- * in cases like this where there are no data dependencies.
- **/
-
-#define read_barrier_depends()	do { } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
-#ifdef CONFIG_X86_PPRO_FENCE
-# define smp_rmb()	rmb()
-#else
-# define smp_rmb()	barrier()
-#endif
-#ifdef CONFIG_X86_OOSTORE
-# define smp_wmb() 	wmb()
-#else
-# define smp_wmb()	barrier()
-#endif
-#define smp_read_barrier_depends()	read_barrier_depends()
-#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
-#else
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while (0)
-#define set_mb(var, value) do { var = value; barrier(); } while (0)
-#endif
-
-/*
- * Stop RDTSC speculation. This is needed when you need to use RDTSC
- * (or get_cycles or vread that possibly accesses the TSC) in a defined
- * code region.
- *
- * (Could use an alternative three way for this if there was one.)
- */
-static inline void rdtsc_barrier(void)
-{
-	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
-	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
-}
-
-#endif /* ASM_X86__SYSTEM_H */
diff --git a/include/asm-x86/system_64.h b/include/asm-x86/system_64.h
deleted file mode 100644
index 5aedb8b..0000000
--- a/include/asm-x86/system_64.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef ASM_X86__SYSTEM_64_H
-#define ASM_X86__SYSTEM_64_H
-
-#include <asm/segment.h>
-#include <asm/cmpxchg.h>
-
-
-static inline unsigned long read_cr8(void)
-{
-	unsigned long cr8;
-	asm volatile("movq %%cr8,%0" : "=r" (cr8));
-	return cr8;
-}
-
-static inline void write_cr8(unsigned long val)
-{
-	asm volatile("movq %0,%%cr8" :: "r" (val) : "memory");
-}
-
-#include <linux/irqflags.h>
-
-#endif /* ASM_X86__SYSTEM_64_H */
diff --git a/include/asm-x86/tce.h b/include/asm-x86/tce.h
deleted file mode 100644
index e7932d7..0000000
--- a/include/asm-x86/tce.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * This file is derived from asm-powerpc/tce.h.
- *
- * Copyright (C) IBM Corporation, 2006
- *
- * Author: Muli Ben-Yehuda <muli@il.ibm.com>
- * Author: Jon Mason <jdmason@us.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef ASM_X86__TCE_H
-#define ASM_X86__TCE_H
-
-extern unsigned int specified_table_size;
-struct iommu_table;
-
-#define TCE_ENTRY_SIZE   8   /* in bytes */
-
-#define TCE_READ_SHIFT   0
-#define TCE_WRITE_SHIFT  1
-#define TCE_HUBID_SHIFT  2   /* unused */
-#define TCE_RSVD_SHIFT   8   /* unused */
-#define TCE_RPN_SHIFT    12
-#define TCE_UNUSED_SHIFT 48  /* unused */
-
-#define TCE_RPN_MASK     0x0000fffffffff000ULL
-
-extern void tce_build(struct iommu_table *tbl, unsigned long index,
-		      unsigned int npages, unsigned long uaddr, int direction);
-extern void tce_free(struct iommu_table *tbl, long index, unsigned int npages);
-extern void * __init alloc_tce_table(void);
-extern void __init free_tce_table(void *tbl);
-extern int __init build_tce_table(struct pci_dev *dev, void __iomem *bbar);
-
-#endif /* ASM_X86__TCE_H */
diff --git a/include/asm-x86/termbits.h b/include/asm-x86/termbits.h
deleted file mode 100644
index 3d00dc5..0000000
--- a/include/asm-x86/termbits.h
+++ /dev/null
@@ -1,198 +0,0 @@
-#ifndef ASM_X86__TERMBITS_H
-#define ASM_X86__TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define	   BOTHER 0010000		/* non standard rate */
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000	/* input baud rate */
-#define CMSPAR	  010000000000	/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000	/* flow control */
-
-#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* ASM_X86__TERMBITS_H */
diff --git a/include/asm-x86/termios.h b/include/asm-x86/termios.h
deleted file mode 100644
index e235db2..0000000
--- a/include/asm-x86/termios.h
+++ /dev/null
@@ -1,113 +0,0 @@
-#ifndef ASM_X86__TERMIOS_H
-#define ASM_X86__TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-#include <asm/uaccess.h>
-
-/*	intr=^C		quit=^\		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
-	unsigned short __tmp; \
-	get_user(__tmp,&(termio)->x); \
-	*(unsigned short *) &(termios)->x = __tmp; \
-}
-
-static inline int user_termio_to_kernel_termios(struct ktermios *termios,
-						struct termio __user *termio)
-{
-	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag);
-	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag);
-	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag);
-	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag);
-	return copy_from_user(termios->c_cc, termio->c_cc, NCC);
-}
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-static inline int kernel_termios_to_user_termio(struct termio __user *termio,
-					    struct ktermios *termios)
-{
-	put_user((termios)->c_iflag, &(termio)->c_iflag);
-	put_user((termios)->c_oflag, &(termio)->c_oflag);
-	put_user((termios)->c_cflag, &(termio)->c_cflag);
-	put_user((termios)->c_lflag, &(termio)->c_lflag);
-	put_user((termios)->c_line,  &(termio)->c_line);
-	return copy_to_user((termio)->c_cc, (termios)->c_cc, NCC);
-}
-
-static inline int user_termios_to_kernel_termios(struct ktermios *k,
-						 struct termios2 __user *u)
-{
-	return copy_from_user(k, u, sizeof(struct termios2));
-}
-
-static inline int kernel_termios_to_user_termios(struct termios2 __user *u,
-						 struct ktermios *k)
-{
-	return copy_to_user(u, k, sizeof(struct termios2));
-}
-
-static inline int user_termios_to_kernel_termios_1(struct ktermios *k,
-						   struct termios __user *u)
-{
-	return copy_from_user(k, u, sizeof(struct termios));
-}
-
-static inline int kernel_termios_to_user_termios_1(struct termios __user *u,
-						   struct ktermios *k)
-{
-	return copy_to_user(u, k, sizeof(struct termios));
-}
-
-#endif	/* __KERNEL__ */
-
-#endif /* ASM_X86__TERMIOS_H */
diff --git a/include/asm-x86/therm_throt.h b/include/asm-x86/therm_throt.h
deleted file mode 100644
index 1c7f57b..0000000
--- a/include/asm-x86/therm_throt.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef ASM_X86__THERM_THROT_H
-#define ASM_X86__THERM_THROT_H
-
-#include <asm/atomic.h>
-
-extern atomic_t therm_throt_en;
-int therm_throt_process(int curr);
-
-#endif /* ASM_X86__THERM_THROT_H */
diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h
deleted file mode 100644
index 3f4e52b..0000000
--- a/include/asm-x86/thread_info.h
+++ /dev/null
@@ -1,264 +0,0 @@
-/* thread_info.h: low-level thread information
- *
- * Copyright (C) 2002  David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef ASM_X86__THREAD_INFO_H
-#define ASM_X86__THREAD_INFO_H
-
-#include <linux/compiler.h>
-#include <asm/page.h>
-#include <asm/types.h>
-
-/*
- * low level task data that entry.S needs immediate access to
- * - this struct should fit entirely inside of one cache line
- * - this struct shares the supervisor stack pages
- */
-#ifndef __ASSEMBLY__
-struct task_struct;
-struct exec_domain;
-#include <asm/processor.h>
-
-struct thread_info {
-	struct task_struct	*task;		/* main task structure */
-	struct exec_domain	*exec_domain;	/* execution domain */
-	unsigned long		flags;		/* low level flags */
-	__u32			status;		/* thread synchronous flags */
-	__u32			cpu;		/* current CPU */
-	int			preempt_count;	/* 0 => preemptable,
-						   <0 => BUG */
-	mm_segment_t		addr_limit;
-	struct restart_block    restart_block;
-	void __user		*sysenter_return;
-#ifdef CONFIG_X86_32
-	unsigned long           previous_esp;   /* ESP of the previous stack in
-						   case of nested (IRQ) stacks
-						*/
-	__u8			supervisor_stack[0];
-#endif
-};
-
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task		= &tsk,			\
-	.exec_domain	= &default_exec_domain,	\
-	.flags		= 0,			\
-	.cpu		= 0,			\
-	.preempt_count	= 1,			\
-	.addr_limit	= KERNEL_DS,		\
-	.restart_block = {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-#else /* !__ASSEMBLY__ */
-
-#include <asm/asm-offsets.h>
-
-#endif
-
-/*
- * thread information flags
- * - these are process state flags that various assembly files
- *   may need to access
- * - pending work-to-be-done flags are in LSW
- * - other flags in MSW
- * Warning: layout of LSW is hardcoded in entry.S
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
-#define TIF_SIGPENDING		2	/* signal pending */
-#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
-#define TIF_SINGLESTEP		4	/* reenable singlestep on user return*/
-#define TIF_IRET		5	/* force IRET */
-#define TIF_SYSCALL_EMU		6	/* syscall emulation active */
-#define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
-#define TIF_SECCOMP		8	/* secure computing */
-#define TIF_MCE_NOTIFY		10	/* notify userspace of an MCE */
-#define TIF_NOTSC		16	/* TSC is not accessible in userland */
-#define TIF_IA32		17	/* 32bit process */
-#define TIF_FORK		18	/* ret_from_fork */
-#define TIF_ABI_PENDING		19
-#define TIF_MEMDIE		20
-#define TIF_DEBUG		21	/* uses debug registers */
-#define TIF_IO_BITMAP		22	/* uses I/O bitmap */
-#define TIF_FREEZE		23	/* is freezing for suspend */
-#define TIF_FORCED_TF		24	/* true if TF in eflags artificially */
-#define TIF_DEBUGCTLMSR		25	/* uses thread_struct.debugctlmsr */
-#define TIF_DS_AREA_MSR		26      /* uses thread_struct.ds_area_msr */
-#define TIF_BTS_TRACE_TS	27      /* record scheduling event timestamps */
-
-#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
-#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
-#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
-#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
-#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
-#define _TIF_IRET		(1 << TIF_IRET)
-#define _TIF_SYSCALL_EMU	(1 << TIF_SYSCALL_EMU)
-#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
-#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
-#define _TIF_MCE_NOTIFY		(1 << TIF_MCE_NOTIFY)
-#define _TIF_NOTSC		(1 << TIF_NOTSC)
-#define _TIF_IA32		(1 << TIF_IA32)
-#define _TIF_FORK		(1 << TIF_FORK)
-#define _TIF_ABI_PENDING	(1 << TIF_ABI_PENDING)
-#define _TIF_DEBUG		(1 << TIF_DEBUG)
-#define _TIF_IO_BITMAP		(1 << TIF_IO_BITMAP)
-#define _TIF_FREEZE		(1 << TIF_FREEZE)
-#define _TIF_FORCED_TF		(1 << TIF_FORCED_TF)
-#define _TIF_DEBUGCTLMSR	(1 << TIF_DEBUGCTLMSR)
-#define _TIF_DS_AREA_MSR	(1 << TIF_DS_AREA_MSR)
-#define _TIF_BTS_TRACE_TS	(1 << TIF_BTS_TRACE_TS)
-
-/* work to do in syscall_trace_enter() */
-#define _TIF_WORK_SYSCALL_ENTRY	\
-	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | \
-	 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | _TIF_SINGLESTEP)
-
-/* work to do in syscall_trace_leave() */
-#define _TIF_WORK_SYSCALL_EXIT	\
-	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP)
-
-/* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK							\
-	(0x0000FFFF &							\
-	 ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|			\
-	   _TIF_SINGLESTEP|_TIF_SECCOMP|_TIF_SYSCALL_EMU))
-
-/* work to do on any return to user space */
-#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP)
-
-/* Only used for 64 bit */
-#define _TIF_DO_NOTIFY_MASK						\
-	(_TIF_SIGPENDING|_TIF_MCE_NOTIFY|_TIF_NOTIFY_RESUME)
-
-/* flags to check in __switch_to() */
-#define _TIF_WORK_CTXSW							\
-	(_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS| \
-								_TIF_NOTSC)
-
-#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW
-#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG)
-
-#define PREEMPT_ACTIVE		0x10000000
-
-/* thread information allocation */
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO)
-#else
-#define THREAD_FLAGS GFP_KERNEL
-#endif
-
-#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
-
-#define alloc_thread_info(tsk)						\
-	((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER))
-
-#ifdef CONFIG_X86_32
-
-#define STACK_WARN	(THREAD_SIZE/8)
-/*
- * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
- */
-#ifndef __ASSEMBLY__
-
-
-/* how to get the current stack pointer from C */
-register unsigned long current_stack_pointer asm("esp") __used;
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-	return (struct thread_info *)
-		(current_stack_pointer & ~(THREAD_SIZE - 1));
-}
-
-#else /* !__ASSEMBLY__ */
-
-/* how to get the thread information struct from ASM */
-#define GET_THREAD_INFO(reg)	 \
-	movl $-THREAD_SIZE, reg; \
-	andl %esp, reg
-
-/* use this one if reg already contains %esp */
-#define GET_THREAD_INFO_WITH_ESP(reg) \
-	andl $-THREAD_SIZE, reg
-
-#endif
-
-#else /* X86_32 */
-
-#include <asm/pda.h>
-
-/*
- * macros/functions for gaining access to the thread information structure
- * preempt_count needs to be 1 initially, until the scheduler is functional.
- */
-#ifndef __ASSEMBLY__
-static inline struct thread_info *current_thread_info(void)
-{
-	struct thread_info *ti;
-	ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE);
-	return ti;
-}
-
-/* do not use in interrupt context */
-static inline struct thread_info *stack_thread_info(void)
-{
-	struct thread_info *ti;
-	asm("andq %%rsp,%0; " : "=r" (ti) : "0" (~(THREAD_SIZE - 1)));
-	return ti;
-}
-
-#else /* !__ASSEMBLY__ */
-
-/* how to get the thread information struct from ASM */
-#define GET_THREAD_INFO(reg) \
-	movq %gs:pda_kernelstack,reg ; \
-	subq $(THREAD_SIZE-PDA_STACKOFFSET),reg
-
-#endif
-
-#endif /* !X86_32 */
-
-/*
- * Thread-synchronous status.
- *
- * This is different from the flags in that nobody else
- * ever touches our thread-synchronous status, so we don't
- * have to worry about atomic accesses.
- */
-#define TS_USEDFPU		0x0001	/* FPU was used by this task
-					   this quantum (SMP) */
-#define TS_COMPAT		0x0002	/* 32bit syscall active (64BIT)*/
-#define TS_POLLING		0x0004	/* true if in idle loop
-					   and not sleeping */
-#define TS_RESTORE_SIGMASK	0x0008	/* restore signal mask in do_signal() */
-#define TS_XSAVE		0x0010	/* Use xsave/xrstor */
-
-#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
-
-#ifndef __ASSEMBLY__
-#define HAVE_SET_RESTORE_SIGMASK	1
-static inline void set_restore_sigmask(void)
-{
-	struct thread_info *ti = current_thread_info();
-	ti->status |= TS_RESTORE_SIGMASK;
-	set_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags);
-}
-#endif	/* !__ASSEMBLY__ */
-
-#ifndef __ASSEMBLY__
-extern void arch_task_cache_init(void);
-extern void free_thread_info(struct thread_info *ti);
-extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
-#define arch_task_cache_init arch_task_cache_init
-#endif
-#endif /* ASM_X86__THREAD_INFO_H */
diff --git a/include/asm-x86/time.h b/include/asm-x86/time.h
deleted file mode 100644
index 3e724ee..0000000
--- a/include/asm-x86/time.h
+++ /dev/null
@@ -1,63 +0,0 @@
-#ifndef ASM_X86__TIME_H
-#define ASM_X86__TIME_H
-
-extern void hpet_time_init(void);
-
-#include <asm/mc146818rtc.h>
-#ifdef CONFIG_X86_32
-#include <linux/efi.h>
-
-static inline unsigned long native_get_wallclock(void)
-{
-	unsigned long retval;
-
-	if (efi_enabled)
-		retval = efi_get_time();
-	else
-		retval = mach_get_cmos_time();
-
-	return retval;
-}
-
-static inline int native_set_wallclock(unsigned long nowtime)
-{
-	int retval;
-
-	if (efi_enabled)
-		retval = efi_set_rtc_mmss(nowtime);
-	else
-		retval = mach_set_rtc_mmss(nowtime);
-
-	return retval;
-}
-
-#else
-extern void native_time_init_hook(void);
-
-static inline unsigned long native_get_wallclock(void)
-{
-	return mach_get_cmos_time();
-}
-
-static inline int native_set_wallclock(unsigned long nowtime)
-{
-	return mach_set_rtc_mmss(nowtime);
-}
-
-#endif
-
-extern void time_init(void);
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else /* !CONFIG_PARAVIRT */
-
-#define get_wallclock() native_get_wallclock()
-#define set_wallclock(x) native_set_wallclock(x)
-#define choose_time_init() hpet_time_init
-
-#endif /* CONFIG_PARAVIRT */
-
-extern unsigned long __init calibrate_cpu(void);
-
-#endif /* ASM_X86__TIME_H */
diff --git a/include/asm-x86/timer.h b/include/asm-x86/timer.h
deleted file mode 100644
index d0babce..0000000
--- a/include/asm-x86/timer.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef ASM_X86__TIMER_H
-#define ASM_X86__TIMER_H
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/percpu.h>
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-unsigned long long native_sched_clock(void);
-unsigned long native_calibrate_tsc(void);
-
-#ifdef CONFIG_X86_32
-extern int timer_ack;
-extern int recalibrate_cpu_khz(void);
-#endif /* CONFIG_X86_32 */
-
-extern int no_timer_check;
-
-#ifndef CONFIG_PARAVIRT
-#define calibrate_tsc() native_calibrate_tsc()
-#endif
-
-/* Accelerators for sched_clock()
- * convert from cycles(64bits) => nanoseconds (64bits)
- *  basic equation:
- *		ns = cycles / (freq / ns_per_sec)
- *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_khz * 10^3))
- *		ns = cycles * (10^6 / cpu_khz)
- *
- *	Then we use scaling math (suggested by george@mvista.com) to get:
- *		ns = cycles * (10^6 * SC / cpu_khz) / SC
- *		ns = cycles * cyc2ns_scale / SC
- *
- *	And since SC is a constant power of two, we can convert the div
- *  into a shift.
- *
- *  We can use khz divisor instead of mhz to keep a better precision, since
- *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
- *  (mathieu.desnoyers@polymtl.ca)
- *
- *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
- */
-
-DECLARE_PER_CPU(unsigned long, cyc2ns);
-
-#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
-
-static inline unsigned long long __cycles_2_ns(unsigned long long cyc)
-{
-	return cyc * per_cpu(cyc2ns, smp_processor_id()) >> CYC2NS_SCALE_FACTOR;
-}
-
-static inline unsigned long long cycles_2_ns(unsigned long long cyc)
-{
-	unsigned long long ns;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	ns = __cycles_2_ns(cyc);
-	local_irq_restore(flags);
-
-	return ns;
-}
-
-#endif /* ASM_X86__TIMER_H */
diff --git a/include/asm-x86/timex.h b/include/asm-x86/timex.h
deleted file mode 100644
index d1ce241..0000000
--- a/include/asm-x86/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* x86 architecture timex specifications */
-#ifndef ASM_X86__TIMEX_H
-#define ASM_X86__TIMEX_H
-
-#include <asm/processor.h>
-#include <asm/tsc.h>
-
-#ifdef CONFIG_X86_ELAN
-#  define PIT_TICK_RATE 1189200 /* AMD Elan has different frequency! */
-#elif defined(CONFIG_X86_RDC321X)
-#  define PIT_TICK_RATE 1041667 /* Underlying HZ for R8610 */
-#else
-#  define PIT_TICK_RATE 1193182 /* Underlying HZ */
-#endif
-#define CLOCK_TICK_RATE	PIT_TICK_RATE
-
-#define ARCH_HAS_READ_CURRENT_TIMER
-
-#endif /* ASM_X86__TIMEX_H */
diff --git a/include/asm-x86/tlb.h b/include/asm-x86/tlb.h
deleted file mode 100644
index db36e9e..0000000
--- a/include/asm-x86/tlb.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef ASM_X86__TLB_H
-#define ASM_X86__TLB_H
-
-#define tlb_start_vma(tlb, vma) do { } while (0)
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
-#include <asm-generic/tlb.h>
-
-#endif /* ASM_X86__TLB_H */
diff --git a/include/asm-x86/tlbflush.h b/include/asm-x86/tlbflush.h
deleted file mode 100644
index 3cdd08b..0000000
--- a/include/asm-x86/tlbflush.h
+++ /dev/null
@@ -1,178 +0,0 @@
-#ifndef ASM_X86__TLBFLUSH_H
-#define ASM_X86__TLBFLUSH_H
-
-#include <linux/mm.h>
-#include <linux/sched.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define __flush_tlb() __native_flush_tlb()
-#define __flush_tlb_global() __native_flush_tlb_global()
-#define __flush_tlb_single(addr) __native_flush_tlb_single(addr)
-#endif
-
-static inline void __native_flush_tlb(void)
-{
-	write_cr3(read_cr3());
-}
-
-static inline void __native_flush_tlb_global(void)
-{
-	unsigned long flags;
-	unsigned long cr4;
-
-	/*
-	 * Read-modify-write to CR4 - protect it from preemption and
-	 * from interrupts. (Use the raw variant because this code can
-	 * be called from deep inside debugging code.)
-	 */
-	raw_local_irq_save(flags);
-
-	cr4 = read_cr4();
-	/* clear PGE */
-	write_cr4(cr4 & ~X86_CR4_PGE);
-	/* write old PGE again and flush TLBs */
-	write_cr4(cr4);
-
-	raw_local_irq_restore(flags);
-}
-
-static inline void __native_flush_tlb_single(unsigned long addr)
-{
-	asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
-}
-
-static inline void __flush_tlb_all(void)
-{
-	if (cpu_has_pge)
-		__flush_tlb_global();
-	else
-		__flush_tlb();
-}
-
-static inline void __flush_tlb_one(unsigned long addr)
-{
-	if (cpu_has_invlpg)
-		__flush_tlb_single(addr);
-	else
-		__flush_tlb();
-}
-
-#ifdef CONFIG_X86_32
-# define TLB_FLUSH_ALL	0xffffffff
-#else
-# define TLB_FLUSH_ALL	-1ULL
-#endif
-
-/*
- * TLB flushing:
- *
- *  - flush_tlb() flushes the current mm struct TLBs
- *  - flush_tlb_all() flushes all processes TLBs
- *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
- *  - flush_tlb_page(vma, vmaddr) flushes one page
- *  - flush_tlb_range(vma, start, end) flushes a range of pages
- *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
- *  - flush_tlb_others(cpumask, mm, va) flushes TLBs on other cpus
- *
- * ..but the i386 has somewhat limited tlb flushing capabilities,
- * and page-granular flushes are available only on i486 and up.
- *
- * x86-64 can only flush individual pages or full VMs. For a range flush
- * we always do the full VM. Might be worth trying if for a small
- * range a few INVLPGs in a row are a win.
- */
-
-#ifndef CONFIG_SMP
-
-#define flush_tlb() __flush_tlb()
-#define flush_tlb_all() __flush_tlb_all()
-#define local_flush_tlb() __flush_tlb()
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-	if (mm == current->active_mm)
-		__flush_tlb();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma,
-				  unsigned long addr)
-{
-	if (vma->vm_mm == current->active_mm)
-		__flush_tlb_one(addr);
-}
-
-static inline void flush_tlb_range(struct vm_area_struct *vma,
-				   unsigned long start, unsigned long end)
-{
-	if (vma->vm_mm == current->active_mm)
-		__flush_tlb();
-}
-
-static inline void native_flush_tlb_others(const cpumask_t *cpumask,
-					   struct mm_struct *mm,
-					   unsigned long va)
-{
-}
-
-static inline void reset_lazy_tlbstate(void)
-{
-}
-
-#else  /* SMP */
-
-#include <asm/smp.h>
-
-#define local_flush_tlb() __flush_tlb()
-
-extern void flush_tlb_all(void);
-extern void flush_tlb_current_task(void);
-extern void flush_tlb_mm(struct mm_struct *);
-extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
-
-#define flush_tlb()	flush_tlb_current_task()
-
-static inline void flush_tlb_range(struct vm_area_struct *vma,
-				   unsigned long start, unsigned long end)
-{
-	flush_tlb_mm(vma->vm_mm);
-}
-
-void native_flush_tlb_others(const cpumask_t *cpumask, struct mm_struct *mm,
-			     unsigned long va);
-
-#define TLBSTATE_OK	1
-#define TLBSTATE_LAZY	2
-
-#ifdef CONFIG_X86_32
-struct tlb_state {
-	struct mm_struct *active_mm;
-	int state;
-	char __cacheline_padding[L1_CACHE_BYTES-8];
-};
-DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate);
-
-void reset_lazy_tlbstate(void);
-#else
-static inline void reset_lazy_tlbstate(void)
-{
-}
-#endif
-
-#endif	/* SMP */
-
-#ifndef CONFIG_PARAVIRT
-#define flush_tlb_others(mask, mm, va)	native_flush_tlb_others(&mask, mm, va)
-#endif
-
-static inline void flush_tlb_kernel_range(unsigned long start,
-					  unsigned long end)
-{
-	flush_tlb_all();
-}
-
-#endif /* ASM_X86__TLBFLUSH_H */
diff --git a/include/asm-x86/topology.h b/include/asm-x86/topology.h
deleted file mode 100644
index 7eca9bc..0000000
--- a/include/asm-x86/topology.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Written by: Matthew Dobson, IBM Corporation
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <colpatch@us.ibm.com>
- */
-#ifndef ASM_X86__TOPOLOGY_H
-#define ASM_X86__TOPOLOGY_H
-
-#ifdef CONFIG_X86_32
-# ifdef CONFIG_X86_HT
-#  define ENABLE_TOPO_DEFINES
-# endif
-#else
-# ifdef CONFIG_SMP
-#  define ENABLE_TOPO_DEFINES
-# endif
-#endif
-
-/* Node not present */
-#define NUMA_NO_NODE	(-1)
-
-#ifdef CONFIG_NUMA
-#include <linux/cpumask.h>
-#include <asm/mpspec.h>
-
-#ifdef CONFIG_X86_32
-
-/* Mappings between node number and cpus on that node. */
-extern cpumask_t node_to_cpumask_map[];
-
-/* Mappings between logical cpu number and node number */
-extern int cpu_to_node_map[];
-
-/* Returns the number of the node containing CPU 'cpu' */
-static inline int cpu_to_node(int cpu)
-{
-	return cpu_to_node_map[cpu];
-}
-#define early_cpu_to_node(cpu)	cpu_to_node(cpu)
-
-/* Returns a bitmask of CPUs on Node 'node'.
- *
- * Side note: this function creates the returned cpumask on the stack
- * so with a high NR_CPUS count, excessive stack space is used.  The
- * node_to_cpumask_ptr function should be used whenever possible.
- */
-static inline cpumask_t node_to_cpumask(int node)
-{
-	return node_to_cpumask_map[node];
-}
-
-#else /* CONFIG_X86_64 */
-
-/* Mappings between node number and cpus on that node. */
-extern cpumask_t *node_to_cpumask_map;
-
-/* Mappings between logical cpu number and node number */
-DECLARE_EARLY_PER_CPU(int, x86_cpu_to_node_map);
-
-/* Returns the number of the current Node. */
-#define numa_node_id()		read_pda(nodenumber)
-
-#ifdef CONFIG_DEBUG_PER_CPU_MAPS
-extern int cpu_to_node(int cpu);
-extern int early_cpu_to_node(int cpu);
-extern const cpumask_t *_node_to_cpumask_ptr(int node);
-extern cpumask_t node_to_cpumask(int node);
-
-#else	/* !CONFIG_DEBUG_PER_CPU_MAPS */
-
-/* Returns the number of the node containing CPU 'cpu' */
-static inline int cpu_to_node(int cpu)
-{
-	return per_cpu(x86_cpu_to_node_map, cpu);
-}
-
-/* Same function but used if called before per_cpu areas are setup */
-static inline int early_cpu_to_node(int cpu)
-{
-	if (early_per_cpu_ptr(x86_cpu_to_node_map))
-		return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
-
-	return per_cpu(x86_cpu_to_node_map, cpu);
-}
-
-/* Returns a pointer to the cpumask of CPUs on Node 'node'. */
-static inline const cpumask_t *_node_to_cpumask_ptr(int node)
-{
-	return &node_to_cpumask_map[node];
-}
-
-/* Returns a bitmask of CPUs on Node 'node'. */
-static inline cpumask_t node_to_cpumask(int node)
-{
-	return node_to_cpumask_map[node];
-}
-
-#endif /* !CONFIG_DEBUG_PER_CPU_MAPS */
-
-/* Replace default node_to_cpumask_ptr with optimized version */
-#define node_to_cpumask_ptr(v, node)		\
-		const cpumask_t *v = _node_to_cpumask_ptr(node)
-
-#define node_to_cpumask_ptr_next(v, node)	\
-			   v = _node_to_cpumask_ptr(node)
-
-#endif /* CONFIG_X86_64 */
-
-/*
- * Returns the number of the node containing Node 'node'. This
- * architecture is flat, so it is a pretty simple function!
- */
-#define parent_node(node) (node)
-
-#define pcibus_to_node(bus) __pcibus_to_node(bus)
-#define pcibus_to_cpumask(bus) __pcibus_to_cpumask(bus)
-
-#ifdef CONFIG_X86_32
-extern unsigned long node_start_pfn[];
-extern unsigned long node_end_pfn[];
-extern unsigned long node_remap_size[];
-#define node_has_online_mem(nid) (node_start_pfn[nid] != node_end_pfn[nid])
-
-# define SD_CACHE_NICE_TRIES	1
-# define SD_IDLE_IDX		1
-# define SD_NEWIDLE_IDX		2
-# define SD_FORKEXEC_IDX	0
-
-#else
-
-# define SD_CACHE_NICE_TRIES	2
-# define SD_IDLE_IDX		2
-# define SD_NEWIDLE_IDX		2
-# define SD_FORKEXEC_IDX	1
-
-#endif
-
-/* sched_domains SD_NODE_INIT for NUMAQ machines */
-#define SD_NODE_INIT (struct sched_domain) {		\
-	.min_interval		= 8,			\
-	.max_interval		= 32,			\
-	.busy_factor		= 32,			\
-	.imbalance_pct		= 125,			\
-	.cache_nice_tries	= SD_CACHE_NICE_TRIES,	\
-	.busy_idx		= 3,			\
-	.idle_idx		= SD_IDLE_IDX,		\
-	.newidle_idx		= SD_NEWIDLE_IDX,	\
-	.wake_idx		= 1,			\
-	.forkexec_idx		= SD_FORKEXEC_IDX,	\
-	.flags			= SD_LOAD_BALANCE	\
-				| SD_BALANCE_EXEC	\
-				| SD_BALANCE_FORK	\
-				| SD_SERIALIZE		\
-				| SD_WAKE_BALANCE,	\
-	.last_balance		= jiffies,		\
-	.balance_interval	= 1,			\
-}
-
-#ifdef CONFIG_X86_64_ACPI_NUMA
-extern int __node_distance(int, int);
-#define node_distance(a, b) __node_distance(a, b)
-#endif
-
-#else /* !CONFIG_NUMA */
-
-#define numa_node_id()		0
-#define	cpu_to_node(cpu)	0
-#define	early_cpu_to_node(cpu)	0
-
-static inline const cpumask_t *_node_to_cpumask_ptr(int node)
-{
-	return &cpu_online_map;
-}
-static inline cpumask_t node_to_cpumask(int node)
-{
-	return cpu_online_map;
-}
-static inline int node_to_first_cpu(int node)
-{
-	return first_cpu(cpu_online_map);
-}
-
-/* Replace default node_to_cpumask_ptr with optimized version */
-#define node_to_cpumask_ptr(v, node)		\
-		const cpumask_t *v = _node_to_cpumask_ptr(node)
-
-#define node_to_cpumask_ptr_next(v, node)	\
-			   v = _node_to_cpumask_ptr(node)
-#endif
-
-#include <asm-generic/topology.h>
-
-#ifdef CONFIG_NUMA
-/* Returns the number of the first CPU on Node 'node'. */
-static inline int node_to_first_cpu(int node)
-{
-	node_to_cpumask_ptr(mask, node);
-	return first_cpu(*mask);
-}
-#endif
-
-extern cpumask_t cpu_coregroup_map(int cpu);
-
-#ifdef ENABLE_TOPO_DEFINES
-#define topology_physical_package_id(cpu)	(cpu_data(cpu).phys_proc_id)
-#define topology_core_id(cpu)			(cpu_data(cpu).cpu_core_id)
-#define topology_core_siblings(cpu)		(per_cpu(cpu_core_map, cpu))
-#define topology_thread_siblings(cpu)		(per_cpu(cpu_sibling_map, cpu))
-
-/* indicates that pointers to the topology cpumask_t maps are valid */
-#define arch_provides_topology_pointers		yes
-#endif
-
-static inline void arch_fix_phys_package_id(int num, u32 slot)
-{
-}
-
-struct pci_bus;
-void set_pci_bus_resources_arch_default(struct pci_bus *b);
-
-#ifdef CONFIG_SMP
-#define mc_capable()			(boot_cpu_data.x86_max_cores > 1)
-#define smt_capable()			(smp_num_siblings > 1)
-#endif
-
-#ifdef CONFIG_NUMA
-extern int get_mp_bus_to_node(int busnum);
-extern void set_mp_bus_to_node(int busnum, int node);
-#else
-static inline int get_mp_bus_to_node(int busnum)
-{
-	return 0;
-}
-static inline void set_mp_bus_to_node(int busnum, int node)
-{
-}
-#endif
-
-#endif /* ASM_X86__TOPOLOGY_H */
diff --git a/include/asm-x86/trampoline.h b/include/asm-x86/trampoline.h
deleted file mode 100644
index 0406bbd..0000000
--- a/include/asm-x86/trampoline.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef ASM_X86__TRAMPOLINE_H
-#define ASM_X86__TRAMPOLINE_H
-
-#ifndef __ASSEMBLY__
-
-/*
- * Trampoline 80x86 program as an array.
- */
-extern const unsigned char trampoline_data [];
-extern const unsigned char trampoline_end  [];
-extern unsigned char *trampoline_base;
-
-extern unsigned long init_rsp;
-extern unsigned long initial_code;
-
-#define TRAMPOLINE_BASE 0x6000
-extern unsigned long setup_trampoline(void);
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* ASM_X86__TRAMPOLINE_H */
diff --git a/include/asm-x86/traps.h b/include/asm-x86/traps.h
deleted file mode 100644
index 6c3dc2c..0000000
--- a/include/asm-x86/traps.h
+++ /dev/null
@@ -1,81 +0,0 @@
-#ifndef ASM_X86__TRAPS_H
-#define ASM_X86__TRAPS_H
-
-#include <asm/debugreg.h>
-
-#ifdef CONFIG_X86_32
-#define dotraplinkage
-#else
-#define dotraplinkage asmlinkage
-#endif
-
-asmlinkage void divide_error(void);
-asmlinkage void debug(void);
-asmlinkage void nmi(void);
-asmlinkage void int3(void);
-asmlinkage void overflow(void);
-asmlinkage void bounds(void);
-asmlinkage void invalid_op(void);
-asmlinkage void device_not_available(void);
-#ifdef CONFIG_X86_64
-asmlinkage void double_fault(void);
-#endif
-asmlinkage void coprocessor_segment_overrun(void);
-asmlinkage void invalid_TSS(void);
-asmlinkage void segment_not_present(void);
-asmlinkage void stack_segment(void);
-asmlinkage void general_protection(void);
-asmlinkage void page_fault(void);
-asmlinkage void spurious_interrupt_bug(void);
-asmlinkage void coprocessor_error(void);
-asmlinkage void alignment_check(void);
-#ifdef CONFIG_X86_MCE
-asmlinkage void machine_check(void);
-#endif /* CONFIG_X86_MCE */
-asmlinkage void simd_coprocessor_error(void);
-
-dotraplinkage void do_divide_error(struct pt_regs *, long);
-dotraplinkage void do_debug(struct pt_regs *, long);
-dotraplinkage void do_nmi(struct pt_regs *, long);
-dotraplinkage void do_int3(struct pt_regs *, long);
-dotraplinkage void do_overflow(struct pt_regs *, long);
-dotraplinkage void do_bounds(struct pt_regs *, long);
-dotraplinkage void do_invalid_op(struct pt_regs *, long);
-dotraplinkage void do_device_not_available(struct pt_regs *, long);
-dotraplinkage void do_coprocessor_segment_overrun(struct pt_regs *, long);
-dotraplinkage void do_invalid_TSS(struct pt_regs *, long);
-dotraplinkage void do_segment_not_present(struct pt_regs *, long);
-dotraplinkage void do_stack_segment(struct pt_regs *, long);
-dotraplinkage void do_general_protection(struct pt_regs *, long);
-dotraplinkage void do_page_fault(struct pt_regs *, unsigned long);
-dotraplinkage void do_spurious_interrupt_bug(struct pt_regs *, long);
-dotraplinkage void do_coprocessor_error(struct pt_regs *, long);
-dotraplinkage void do_alignment_check(struct pt_regs *, long);
-#ifdef CONFIG_X86_MCE
-dotraplinkage void do_machine_check(struct pt_regs *, long);
-#endif
-dotraplinkage void do_simd_coprocessor_error(struct pt_regs *, long);
-#ifdef CONFIG_X86_32
-dotraplinkage void do_iret_error(struct pt_regs *, long);
-#endif
-
-static inline int get_si_code(unsigned long condition)
-{
-	if (condition & DR_STEP)
-		return TRAP_TRACE;
-	else if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3))
-		return TRAP_HWBKPT;
-	else
-		return TRAP_BRKPT;
-}
-
-extern int panic_on_unrecovered_nmi;
-extern int kstack_depth_to_print;
-
-#ifdef CONFIG_X86_32
-void math_error(void __user *);
-unsigned long patch_espfix_desc(unsigned long, unsigned long);
-asmlinkage void math_emulate(long);
-#endif
-
-#endif /* ASM_X86__TRAPS_H */
diff --git a/include/asm-x86/tsc.h b/include/asm-x86/tsc.h
deleted file mode 100644
index ad0f5c4..0000000
--- a/include/asm-x86/tsc.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * x86 TSC related functions
- */
-#ifndef ASM_X86__TSC_H
-#define ASM_X86__TSC_H
-
-#include <asm/processor.h>
-
-#define NS_SCALE	10 /* 2^10, carefully chosen */
-#define US_SCALE	32 /* 2^32, arbitralrily chosen */
-
-/*
- * Standard way to access the cycle counter.
- */
-typedef unsigned long long cycles_t;
-
-extern unsigned int cpu_khz;
-extern unsigned int tsc_khz;
-
-extern void disable_TSC(void);
-
-static inline cycles_t get_cycles(void)
-{
-	unsigned long long ret = 0;
-
-#ifndef CONFIG_X86_TSC
-	if (!cpu_has_tsc)
-		return 0;
-#endif
-	rdtscll(ret);
-
-	return ret;
-}
-
-static __always_inline cycles_t vget_cycles(void)
-{
-	/*
-	 * We only do VDSOs on TSC capable CPUs, so this shouldnt
-	 * access boot_cpu_data (which is not VDSO-safe):
-	 */
-#ifndef CONFIG_X86_TSC
-	if (!cpu_has_tsc)
-		return 0;
-#endif
-	return (cycles_t)__native_read_tsc();
-}
-
-extern void tsc_init(void);
-extern void mark_tsc_unstable(char *reason);
-extern int unsynchronized_tsc(void);
-int check_tsc_unstable(void);
-
-/*
- * Boot-time check whether the TSCs are synchronized across
- * all CPUs/cores:
- */
-extern void check_tsc_sync_source(int cpu);
-extern void check_tsc_sync_target(void);
-
-extern int notsc_setup(char *);
-
-#endif /* ASM_X86__TSC_H */
diff --git a/include/asm-x86/types.h b/include/asm-x86/types.h
deleted file mode 100644
index e78b52e..0000000
--- a/include/asm-x86/types.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef ASM_X86__TYPES_H
-#define ASM_X86__TYPES_H
-
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#ifdef CONFIG_X86_32
-# define BITS_PER_LONG 32
-#else
-# define BITS_PER_LONG 64
-#endif
-
-#ifndef __ASSEMBLY__
-
-typedef u64 dma64_addr_t;
-#if defined(CONFIG_X86_64) || defined(CONFIG_HIGHMEM64G)
-/* DMA addresses come in 32-bit and 64-bit flavours. */
-typedef u64 dma_addr_t;
-#else
-typedef u32 dma_addr_t;
-#endif
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-
-#endif /* ASM_X86__TYPES_H */
diff --git a/include/asm-x86/uaccess.h b/include/asm-x86/uaccess.h
deleted file mode 100644
index 48ebc0a..0000000
--- a/include/asm-x86/uaccess.h
+++ /dev/null
@@ -1,454 +0,0 @@
-#ifndef ASM_X86__UACCESS_H
-#define ASM_X86__UACCESS_H
-/*
- * User space memory access functions
- */
-#include <linux/errno.h>
-#include <linux/compiler.h>
-#include <linux/thread_info.h>
-#include <linux/prefetch.h>
-#include <linux/string.h>
-#include <asm/asm.h>
-#include <asm/page.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-
-#define KERNEL_DS	MAKE_MM_SEG(-1UL)
-#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
-
-#define get_ds()	(KERNEL_DS)
-#define get_fs()	(current_thread_info()->addr_limit)
-#define set_fs(x)	(current_thread_info()->addr_limit = (x))
-
-#define segment_eq(a, b)	((a).seg == (b).seg)
-
-#define __addr_ok(addr)					\
-	((unsigned long __force)(addr) <		\
-	 (current_thread_info()->addr_limit.seg))
-
-/*
- * Test whether a block of memory is a valid user space address.
- * Returns 0 if the range is valid, nonzero otherwise.
- *
- * This is equivalent to the following test:
- * (u33)addr + (u33)size >= (u33)current->addr_limit.seg (u65 for x86_64)
- *
- * This needs 33-bit (65-bit for x86_64) arithmetic. We have a carry...
- */
-
-#define __range_not_ok(addr, size)					\
-({									\
-	unsigned long flag, roksum;					\
-	__chk_user_ptr(addr);						\
-	asm("add %3,%1 ; sbb %0,%0 ; cmp %1,%4 ; sbb $0,%0"		\
-	    : "=&r" (flag), "=r" (roksum)				\
-	    : "1" (addr), "g" ((long)(size)),				\
-	      "rm" (current_thread_info()->addr_limit.seg));		\
-	flag;								\
-})
-
-/**
- * access_ok: - Checks if a user space pointer is valid
- * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE.  Note that
- *        %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
- *        to write to a block, it is always safe to read from it.
- * @addr: User space pointer to start of block to check
- * @size: Size of block to check
- *
- * Context: User context only.  This function may sleep.
- *
- * Checks if a pointer to a block of memory in user space is valid.
- *
- * Returns true (nonzero) if the memory block may be valid, false (zero)
- * if it is definitely invalid.
- *
- * Note that, depending on architecture, this function probably just
- * checks that the pointer is in the user space range - after calling
- * this function, memory access functions may still return -EFAULT.
- */
-#define access_ok(type, addr, size) (likely(__range_not_ok(addr, size) == 0))
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
-	unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-/*
- * These are the main single-value transfer routines.  They automatically
- * use the right size if we just have the right pointer type.
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the ugliness from the user.
- *
- * The "__xxx" versions of the user access functions are versions that
- * do not verify the address space, that must have been done previously
- * with a separate "access_ok()" call (this is used when we do multiple
- * accesses to the same area of user memory).
- */
-
-extern int __get_user_1(void);
-extern int __get_user_2(void);
-extern int __get_user_4(void);
-extern int __get_user_8(void);
-extern int __get_user_bad(void);
-
-#define __get_user_x(size, ret, x, ptr)		      \
-	asm volatile("call __get_user_" #size	      \
-		     : "=a" (ret),"=d" (x)	      \
-		     : "0" (ptr))		      \
-
-/* Careful: we have to cast the result to the type of the pointer
- * for sign reasons */
-
-/**
- * get_user: - Get a simple variable from user space.
- * @x:   Variable to store result.
- * @ptr: Source address, in user space.
- *
- * Context: User context only.  This function may sleep.
- *
- * This macro copies a single simple variable from user space to kernel
- * space.  It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and the result of
- * dereferencing @ptr must be assignable to @x without a cast.
- *
- * Returns zero on success, or -EFAULT on error.
- * On error, the variable @x is set to zero.
- */
-#ifdef CONFIG_X86_32
-#define __get_user_8(__ret_gu, __val_gu, ptr)				\
-		__get_user_x(X, __ret_gu, __val_gu, ptr)
-#else
-#define __get_user_8(__ret_gu, __val_gu, ptr)				\
-		__get_user_x(8, __ret_gu, __val_gu, ptr)
-#endif
-
-#define get_user(x, ptr)						\
-({									\
-	int __ret_gu;							\
-	unsigned long __val_gu;						\
-	__chk_user_ptr(ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1:								\
-		__get_user_x(1, __ret_gu, __val_gu, ptr);		\
-		break;							\
-	case 2:								\
-		__get_user_x(2, __ret_gu, __val_gu, ptr);		\
-		break;							\
-	case 4:								\
-		__get_user_x(4, __ret_gu, __val_gu, ptr);		\
-		break;							\
-	case 8:								\
-		__get_user_8(__ret_gu, __val_gu, ptr);			\
-		break;							\
-	default:							\
-		__get_user_x(X, __ret_gu, __val_gu, ptr);		\
-		break;							\
-	}								\
-	(x) = (__typeof__(*(ptr)))__val_gu;				\
-	__ret_gu;							\
-})
-
-#define __put_user_x(size, x, ptr, __ret_pu)			\
-	asm volatile("call __put_user_" #size : "=a" (__ret_pu)	\
-		     :"0" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
-
-
-
-#ifdef CONFIG_X86_32
-#define __put_user_u64(x, addr, err)					\
-	asm volatile("1:	movl %%eax,0(%2)\n"			\
-		     "2:	movl %%edx,4(%2)\n"			\
-		     "3:\n"						\
-		     ".section .fixup,\"ax\"\n"				\
-		     "4:	movl %3,%0\n"				\
-		     "	jmp 3b\n"					\
-		     ".previous\n"					\
-		     _ASM_EXTABLE(1b, 4b)				\
-		     _ASM_EXTABLE(2b, 4b)				\
-		     : "=r" (err)					\
-		     : "A" (x), "r" (addr), "i" (-EFAULT), "0" (err))
-
-#define __put_user_x8(x, ptr, __ret_pu)				\
-	asm volatile("call __put_user_8" : "=a" (__ret_pu)	\
-		     : "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
-#else
-#define __put_user_u64(x, ptr, retval) \
-	__put_user_asm(x, ptr, retval, "q", "", "Zr", -EFAULT)
-#define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
-#endif
-
-extern void __put_user_bad(void);
-
-/*
- * Strange magic calling convention: pointer in %ecx,
- * value in %eax(:%edx), return value in %eax. clobbers %rbx
- */
-extern void __put_user_1(void);
-extern void __put_user_2(void);
-extern void __put_user_4(void);
-extern void __put_user_8(void);
-
-#ifdef CONFIG_X86_WP_WORKS_OK
-
-/**
- * put_user: - Write a simple value into user space.
- * @x:   Value to copy to user space.
- * @ptr: Destination address, in user space.
- *
- * Context: User context only.  This function may sleep.
- *
- * This macro copies a single simple value from kernel space to user
- * space.  It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and @x must be assignable
- * to the result of dereferencing @ptr.
- *
- * Returns zero on success, or -EFAULT on error.
- */
-#define put_user(x, ptr)					\
-({								\
-	int __ret_pu;						\
-	__typeof__(*(ptr)) __pu_val;				\
-	__chk_user_ptr(ptr);					\
-	__pu_val = x;						\
-	switch (sizeof(*(ptr))) {				\
-	case 1:							\
-		__put_user_x(1, __pu_val, ptr, __ret_pu);	\
-		break;						\
-	case 2:							\
-		__put_user_x(2, __pu_val, ptr, __ret_pu);	\
-		break;						\
-	case 4:							\
-		__put_user_x(4, __pu_val, ptr, __ret_pu);	\
-		break;						\
-	case 8:							\
-		__put_user_x8(__pu_val, ptr, __ret_pu);		\
-		break;						\
-	default:						\
-		__put_user_x(X, __pu_val, ptr, __ret_pu);	\
-		break;						\
-	}							\
-	__ret_pu;						\
-})
-
-#define __put_user_size(x, ptr, size, retval, errret)			\
-do {									\
-	retval = 0;							\
-	__chk_user_ptr(ptr);						\
-	switch (size) {							\
-	case 1:								\
-		__put_user_asm(x, ptr, retval, "b", "b", "iq", errret);	\
-		break;							\
-	case 2:								\
-		__put_user_asm(x, ptr, retval, "w", "w", "ir", errret);	\
-		break;							\
-	case 4:								\
-		__put_user_asm(x, ptr, retval, "l", "k",  "ir", errret);\
-		break;							\
-	case 8:								\
-		__put_user_u64((__typeof__(*ptr))(x), ptr, retval);	\
-		break;							\
-	default:							\
-		__put_user_bad();					\
-	}								\
-} while (0)
-
-#else
-
-#define __put_user_size(x, ptr, size, retval, errret)			\
-do {									\
-	__typeof__(*(ptr))__pus_tmp = x;				\
-	retval = 0;							\
-									\
-	if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0))	\
-		retval = errret;					\
-} while (0)
-
-#define put_user(x, ptr)					\
-({								\
-	int __ret_pu;						\
-	__typeof__(*(ptr))__pus_tmp = x;			\
-	__ret_pu = 0;						\
-	if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp,		\
-				       sizeof(*(ptr))) != 0))	\
-		__ret_pu = -EFAULT;				\
-	__ret_pu;						\
-})
-#endif
-
-#ifdef CONFIG_X86_32
-#define __get_user_asm_u64(x, ptr, retval, errret)	(x) = __get_user_bad()
-#else
-#define __get_user_asm_u64(x, ptr, retval, errret) \
-	 __get_user_asm(x, ptr, retval, "q", "", "=r", errret)
-#endif
-
-#define __get_user_size(x, ptr, size, retval, errret)			\
-do {									\
-	retval = 0;							\
-	__chk_user_ptr(ptr);						\
-	switch (size) {							\
-	case 1:								\
-		__get_user_asm(x, ptr, retval, "b", "b", "=q", errret);	\
-		break;							\
-	case 2:								\
-		__get_user_asm(x, ptr, retval, "w", "w", "=r", errret);	\
-		break;							\
-	case 4:								\
-		__get_user_asm(x, ptr, retval, "l", "k", "=r", errret);	\
-		break;							\
-	case 8:								\
-		__get_user_asm_u64(x, ptr, retval, errret);		\
-		break;							\
-	default:							\
-		(x) = __get_user_bad();					\
-	}								\
-} while (0)
-
-#define __get_user_asm(x, addr, err, itype, rtype, ltype, errret)	\
-	asm volatile("1:	mov"itype" %2,%"rtype"1\n"		\
-		     "2:\n"						\
-		     ".section .fixup,\"ax\"\n"				\
-		     "3:	mov %3,%0\n"				\
-		     "	xor"itype" %"rtype"1,%"rtype"1\n"		\
-		     "	jmp 2b\n"					\
-		     ".previous\n"					\
-		     _ASM_EXTABLE(1b, 3b)				\
-		     : "=r" (err), ltype(x)				\
-		     : "m" (__m(addr)), "i" (errret), "0" (err))
-
-#define __put_user_nocheck(x, ptr, size)			\
-({								\
-	long __pu_err;						\
-	__put_user_size((x), (ptr), (size), __pu_err, -EFAULT);	\
-	__pu_err;						\
-})
-
-#define __get_user_nocheck(x, ptr, size)				\
-({									\
-	long __gu_err;							\
-	unsigned long __gu_val;						\
-	__get_user_size(__gu_val, (ptr), (size), __gu_err, -EFAULT);	\
-	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
-	__gu_err;							\
-})
-
-/* FIXME: this hack is definitely wrong -AK */
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-#define __put_user_asm(x, addr, err, itype, rtype, ltype, errret)	\
-	asm volatile("1:	mov"itype" %"rtype"1,%2\n"		\
-		     "2:\n"						\
-		     ".section .fixup,\"ax\"\n"				\
-		     "3:	mov %3,%0\n"				\
-		     "	jmp 2b\n"					\
-		     ".previous\n"					\
-		     _ASM_EXTABLE(1b, 3b)				\
-		     : "=r"(err)					\
-		     : ltype(x), "m" (__m(addr)), "i" (errret), "0" (err))
-/**
- * __get_user: - Get a simple variable from user space, with less checking.
- * @x:   Variable to store result.
- * @ptr: Source address, in user space.
- *
- * Context: User context only.  This function may sleep.
- *
- * This macro copies a single simple variable from user space to kernel
- * space.  It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and the result of
- * dereferencing @ptr must be assignable to @x without a cast.
- *
- * Caller must check the pointer with access_ok() before calling this
- * function.
- *
- * Returns zero on success, or -EFAULT on error.
- * On error, the variable @x is set to zero.
- */
-
-#define __get_user(x, ptr)						\
-	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-/**
- * __put_user: - Write a simple value into user space, with less checking.
- * @x:   Value to copy to user space.
- * @ptr: Destination address, in user space.
- *
- * Context: User context only.  This function may sleep.
- *
- * This macro copies a single simple value from kernel space to user
- * space.  It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and @x must be assignable
- * to the result of dereferencing @ptr.
- *
- * Caller must check the pointer with access_ok() before calling this
- * function.
- *
- * Returns zero on success, or -EFAULT on error.
- */
-
-#define __put_user(x, ptr)						\
-	__put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __get_user_unaligned __get_user
-#define __put_user_unaligned __put_user
-
-/*
- * movsl can be slow when source and dest are not both 8-byte aligned
- */
-#ifdef CONFIG_X86_INTEL_USERCOPY
-extern struct movsl_mask {
-	int mask;
-} ____cacheline_aligned_in_smp movsl_mask;
-#endif
-
-#define ARCH_HAS_NOCACHE_UACCESS 1
-
-#ifdef CONFIG_X86_32
-# include "uaccess_32.h"
-#else
-# define ARCH_HAS_SEARCH_EXTABLE
-# include "uaccess_64.h"
-#endif
-
-#endif /* ASM_X86__UACCESS_H */
-
diff --git a/include/asm-x86/uaccess_32.h b/include/asm-x86/uaccess_32.h
deleted file mode 100644
index 6b5b57d..0000000
--- a/include/asm-x86/uaccess_32.h
+++ /dev/null
@@ -1,218 +0,0 @@
-#ifndef ASM_X86__UACCESS_32_H
-#define ASM_X86__UACCESS_32_H
-
-/*
- * User space memory access functions
- */
-#include <linux/errno.h>
-#include <linux/thread_info.h>
-#include <linux/prefetch.h>
-#include <linux/string.h>
-#include <asm/asm.h>
-#include <asm/page.h>
-
-unsigned long __must_check __copy_to_user_ll
-		(void __user *to, const void *from, unsigned long n);
-unsigned long __must_check __copy_from_user_ll
-		(void *to, const void __user *from, unsigned long n);
-unsigned long __must_check __copy_from_user_ll_nozero
-		(void *to, const void __user *from, unsigned long n);
-unsigned long __must_check __copy_from_user_ll_nocache
-		(void *to, const void __user *from, unsigned long n);
-unsigned long __must_check __copy_from_user_ll_nocache_nozero
-		(void *to, const void __user *from, unsigned long n);
-
-/**
- * __copy_to_user_inatomic: - Copy a block of data into user space, with less checking.
- * @to:   Destination address, in user space.
- * @from: Source address, in kernel space.
- * @n:    Number of bytes to copy.
- *
- * Context: User context only.
- *
- * Copy data from kernel space to user space.  Caller must check
- * the specified block with access_ok() before calling this function.
- * The caller should also make sure he pins the user space address
- * so that the we don't result in page fault and sleep.
- *
- * Here we special-case 1, 2 and 4-byte copy_*_user invocations.  On a fault
- * we return the initial request size (1, 2 or 4), as copy_*_user should do.
- * If a store crosses a page boundary and gets a fault, the x86 will not write
- * anything, so this is accurate.
- */
-
-static __always_inline unsigned long __must_check
-__copy_to_user_inatomic(void __user *to, const void *from, unsigned long n)
-{
-	if (__builtin_constant_p(n)) {
-		unsigned long ret;
-
-		switch (n) {
-		case 1:
-			__put_user_size(*(u8 *)from, (u8 __user *)to,
-					1, ret, 1);
-			return ret;
-		case 2:
-			__put_user_size(*(u16 *)from, (u16 __user *)to,
-					2, ret, 2);
-			return ret;
-		case 4:
-			__put_user_size(*(u32 *)from, (u32 __user *)to,
-					4, ret, 4);
-			return ret;
-		}
-	}
-	return __copy_to_user_ll(to, from, n);
-}
-
-/**
- * __copy_to_user: - Copy a block of data into user space, with less checking.
- * @to:   Destination address, in user space.
- * @from: Source address, in kernel space.
- * @n:    Number of bytes to copy.
- *
- * Context: User context only.  This function may sleep.
- *
- * Copy data from kernel space to user space.  Caller must check
- * the specified block with access_ok() before calling this function.
- *
- * Returns number of bytes that could not be copied.
- * On success, this will be zero.
- */
-static __always_inline unsigned long __must_check
-__copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-       might_sleep();
-       return __copy_to_user_inatomic(to, from, n);
-}
-
-static __always_inline unsigned long
-__copy_from_user_inatomic(void *to, const void __user *from, unsigned long n)
-{
-	/* Avoid zeroing the tail if the copy fails..
-	 * If 'n' is constant and 1, 2, or 4, we do still zero on a failure,
-	 * but as the zeroing behaviour is only significant when n is not
-	 * constant, that shouldn't be a problem.
-	 */
-	if (__builtin_constant_p(n)) {
-		unsigned long ret;
-
-		switch (n) {
-		case 1:
-			__get_user_size(*(u8 *)to, from, 1, ret, 1);
-			return ret;
-		case 2:
-			__get_user_size(*(u16 *)to, from, 2, ret, 2);
-			return ret;
-		case 4:
-			__get_user_size(*(u32 *)to, from, 4, ret, 4);
-			return ret;
-		}
-	}
-	return __copy_from_user_ll_nozero(to, from, n);
-}
-
-/**
- * __copy_from_user: - Copy a block of data from user space, with less checking.
- * @to:   Destination address, in kernel space.
- * @from: Source address, in user space.
- * @n:    Number of bytes to copy.
- *
- * Context: User context only.  This function may sleep.
- *
- * Copy data from user space to kernel space.  Caller must check
- * the specified block with access_ok() before calling this function.
- *
- * Returns number of bytes that could not be copied.
- * On success, this will be zero.
- *
- * If some data could not be copied, this function will pad the copied
- * data to the requested size using zero bytes.
- *
- * An alternate version - __copy_from_user_inatomic() - may be called from
- * atomic context and will fail rather than sleep.  In this case the
- * uncopied bytes will *NOT* be padded with zeros.  See fs/filemap.h
- * for explanation of why this is needed.
- */
-static __always_inline unsigned long
-__copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	might_sleep();
-	if (__builtin_constant_p(n)) {
-		unsigned long ret;
-
-		switch (n) {
-		case 1:
-			__get_user_size(*(u8 *)to, from, 1, ret, 1);
-			return ret;
-		case 2:
-			__get_user_size(*(u16 *)to, from, 2, ret, 2);
-			return ret;
-		case 4:
-			__get_user_size(*(u32 *)to, from, 4, ret, 4);
-			return ret;
-		}
-	}
-	return __copy_from_user_ll(to, from, n);
-}
-
-static __always_inline unsigned long __copy_from_user_nocache(void *to,
-				const void __user *from, unsigned long n)
-{
-	might_sleep();
-	if (__builtin_constant_p(n)) {
-		unsigned long ret;
-
-		switch (n) {
-		case 1:
-			__get_user_size(*(u8 *)to, from, 1, ret, 1);
-			return ret;
-		case 2:
-			__get_user_size(*(u16 *)to, from, 2, ret, 2);
-			return ret;
-		case 4:
-			__get_user_size(*(u32 *)to, from, 4, ret, 4);
-			return ret;
-		}
-	}
-	return __copy_from_user_ll_nocache(to, from, n);
-}
-
-static __always_inline unsigned long
-__copy_from_user_inatomic_nocache(void *to, const void __user *from,
-				  unsigned long n)
-{
-       return __copy_from_user_ll_nocache_nozero(to, from, n);
-}
-
-unsigned long __must_check copy_to_user(void __user *to,
-					const void *from, unsigned long n);
-unsigned long __must_check copy_from_user(void *to,
-					  const void __user *from,
-					  unsigned long n);
-long __must_check strncpy_from_user(char *dst, const char __user *src,
-				    long count);
-long __must_check __strncpy_from_user(char *dst,
-				      const char __user *src, long count);
-
-/**
- * strlen_user: - Get the size of a string in user space.
- * @str: The string to measure.
- *
- * Context: User context only.  This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- *
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
- */
-#define strlen_user(str) strnlen_user(str, LONG_MAX)
-
-long strnlen_user(const char __user *str, long n);
-unsigned long __must_check clear_user(void __user *mem, unsigned long len);
-unsigned long __must_check __clear_user(void __user *mem, unsigned long len);
-
-#endif /* ASM_X86__UACCESS_32_H */
diff --git a/include/asm-x86/uaccess_64.h b/include/asm-x86/uaccess_64.h
deleted file mode 100644
index c96c1f5..0000000
--- a/include/asm-x86/uaccess_64.h
+++ /dev/null
@@ -1,202 +0,0 @@
-#ifndef ASM_X86__UACCESS_64_H
-#define ASM_X86__UACCESS_64_H
-
-/*
- * User space memory access functions
- */
-#include <linux/compiler.h>
-#include <linux/errno.h>
-#include <linux/prefetch.h>
-#include <linux/lockdep.h>
-#include <asm/page.h>
-
-/*
- * Copy To/From Userspace
- */
-
-/* Handles exceptions in both to and from, but doesn't do access_ok */
-__must_check unsigned long
-copy_user_generic(void *to, const void *from, unsigned len);
-
-__must_check unsigned long
-copy_to_user(void __user *to, const void *from, unsigned len);
-__must_check unsigned long
-copy_from_user(void *to, const void __user *from, unsigned len);
-__must_check unsigned long
-copy_in_user(void __user *to, const void __user *from, unsigned len);
-
-static __always_inline __must_check
-int __copy_from_user(void *dst, const void __user *src, unsigned size)
-{
-	int ret = 0;
-	if (!__builtin_constant_p(size))
-		return copy_user_generic(dst, (__force void *)src, size);
-	switch (size) {
-	case 1:__get_user_asm(*(u8 *)dst, (u8 __user *)src,
-			      ret, "b", "b", "=q", 1);
-		return ret;
-	case 2:__get_user_asm(*(u16 *)dst, (u16 __user *)src,
-			      ret, "w", "w", "=r", 2);
-		return ret;
-	case 4:__get_user_asm(*(u32 *)dst, (u32 __user *)src,
-			      ret, "l", "k", "=r", 4);
-		return ret;
-	case 8:__get_user_asm(*(u64 *)dst, (u64 __user *)src,
-			      ret, "q", "", "=r", 8);
-		return ret;
-	case 10:
-		__get_user_asm(*(u64 *)dst, (u64 __user *)src,
-			       ret, "q", "", "=r", 16);
-		if (unlikely(ret))
-			return ret;
-		__get_user_asm(*(u16 *)(8 + (char *)dst),
-			       (u16 __user *)(8 + (char __user *)src),
-			       ret, "w", "w", "=r", 2);
-		return ret;
-	case 16:
-		__get_user_asm(*(u64 *)dst, (u64 __user *)src,
-			       ret, "q", "", "=r", 16);
-		if (unlikely(ret))
-			return ret;
-		__get_user_asm(*(u64 *)(8 + (char *)dst),
-			       (u64 __user *)(8 + (char __user *)src),
-			       ret, "q", "", "=r", 8);
-		return ret;
-	default:
-		return copy_user_generic(dst, (__force void *)src, size);
-	}
-}
-
-static __always_inline __must_check
-int __copy_to_user(void __user *dst, const void *src, unsigned size)
-{
-	int ret = 0;
-	if (!__builtin_constant_p(size))
-		return copy_user_generic((__force void *)dst, src, size);
-	switch (size) {
-	case 1:__put_user_asm(*(u8 *)src, (u8 __user *)dst,
-			      ret, "b", "b", "iq", 1);
-		return ret;
-	case 2:__put_user_asm(*(u16 *)src, (u16 __user *)dst,
-			      ret, "w", "w", "ir", 2);
-		return ret;
-	case 4:__put_user_asm(*(u32 *)src, (u32 __user *)dst,
-			      ret, "l", "k", "ir", 4);
-		return ret;
-	case 8:__put_user_asm(*(u64 *)src, (u64 __user *)dst,
-			      ret, "q", "", "ir", 8);
-		return ret;
-	case 10:
-		__put_user_asm(*(u64 *)src, (u64 __user *)dst,
-			       ret, "q", "", "ir", 10);
-		if (unlikely(ret))
-			return ret;
-		asm("":::"memory");
-		__put_user_asm(4[(u16 *)src], 4 + (u16 __user *)dst,
-			       ret, "w", "w", "ir", 2);
-		return ret;
-	case 16:
-		__put_user_asm(*(u64 *)src, (u64 __user *)dst,
-			       ret, "q", "", "ir", 16);
-		if (unlikely(ret))
-			return ret;
-		asm("":::"memory");
-		__put_user_asm(1[(u64 *)src], 1 + (u64 __user *)dst,
-			       ret, "q", "", "ir", 8);
-		return ret;
-	default:
-		return copy_user_generic((__force void *)dst, src, size);
-	}
-}
-
-static __always_inline __must_check
-int __copy_in_user(void __user *dst, const void __user *src, unsigned size)
-{
-	int ret = 0;
-	if (!__builtin_constant_p(size))
-		return copy_user_generic((__force void *)dst,
-					 (__force void *)src, size);
-	switch (size) {
-	case 1: {
-		u8 tmp;
-		__get_user_asm(tmp, (u8 __user *)src,
-			       ret, "b", "b", "=q", 1);
-		if (likely(!ret))
-			__put_user_asm(tmp, (u8 __user *)dst,
-				       ret, "b", "b", "iq", 1);
-		return ret;
-	}
-	case 2: {
-		u16 tmp;
-		__get_user_asm(tmp, (u16 __user *)src,
-			       ret, "w", "w", "=r", 2);
-		if (likely(!ret))
-			__put_user_asm(tmp, (u16 __user *)dst,
-				       ret, "w", "w", "ir", 2);
-		return ret;
-	}
-
-	case 4: {
-		u32 tmp;
-		__get_user_asm(tmp, (u32 __user *)src,
-			       ret, "l", "k", "=r", 4);
-		if (likely(!ret))
-			__put_user_asm(tmp, (u32 __user *)dst,
-				       ret, "l", "k", "ir", 4);
-		return ret;
-	}
-	case 8: {
-		u64 tmp;
-		__get_user_asm(tmp, (u64 __user *)src,
-			       ret, "q", "", "=r", 8);
-		if (likely(!ret))
-			__put_user_asm(tmp, (u64 __user *)dst,
-				       ret, "q", "", "ir", 8);
-		return ret;
-	}
-	default:
-		return copy_user_generic((__force void *)dst,
-					 (__force void *)src, size);
-	}
-}
-
-__must_check long
-strncpy_from_user(char *dst, const char __user *src, long count);
-__must_check long
-__strncpy_from_user(char *dst, const char __user *src, long count);
-__must_check long strnlen_user(const char __user *str, long n);
-__must_check long __strnlen_user(const char __user *str, long n);
-__must_check long strlen_user(const char __user *str);
-__must_check unsigned long clear_user(void __user *mem, unsigned long len);
-__must_check unsigned long __clear_user(void __user *mem, unsigned long len);
-
-__must_check long __copy_from_user_inatomic(void *dst, const void __user *src,
-					    unsigned size);
-
-static __must_check __always_inline int
-__copy_to_user_inatomic(void __user *dst, const void *src, unsigned size)
-{
-	return copy_user_generic((__force void *)dst, src, size);
-}
-
-extern long __copy_user_nocache(void *dst, const void __user *src,
-				unsigned size, int zerorest);
-
-static inline int __copy_from_user_nocache(void *dst, const void __user *src,
-					   unsigned size)
-{
-	might_sleep();
-	return __copy_user_nocache(dst, src, size, 1);
-}
-
-static inline int __copy_from_user_inatomic_nocache(void *dst,
-						    const void __user *src,
-						    unsigned size)
-{
-	return __copy_user_nocache(dst, src, size, 0);
-}
-
-unsigned long
-copy_user_handle_tail(char *to, char *from, unsigned len, unsigned zerorest);
-
-#endif /* ASM_X86__UACCESS_64_H */
diff --git a/include/asm-x86/ucontext.h b/include/asm-x86/ucontext.h
deleted file mode 100644
index 89eaa54..0000000
--- a/include/asm-x86/ucontext.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef ASM_X86__UCONTEXT_H
-#define ASM_X86__UCONTEXT_H
-
-#define UC_FP_XSTATE	0x1	/* indicates the presence of extended state
-				 * information in the memory layout pointed
-				 * by the fpstate pointer in the ucontext's
-				 * sigcontext struct (uc_mcontext).
-				 */
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct sigcontext uc_mcontext;
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-#endif /* ASM_X86__UCONTEXT_H */
diff --git a/include/asm-x86/unaligned.h b/include/asm-x86/unaligned.h
deleted file mode 100644
index 59dcdec..0000000
--- a/include/asm-x86/unaligned.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef ASM_X86__UNALIGNED_H
-#define ASM_X86__UNALIGNED_H
-
-/*
- * The x86 can do unaligned accesses itself.
- */
-
-#include <linux/unaligned/access_ok.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned __get_unaligned_le
-#define put_unaligned __put_unaligned_le
-
-#endif /* ASM_X86__UNALIGNED_H */
diff --git a/include/asm-x86/unistd_32.h b/include/asm-x86/unistd_32.h
deleted file mode 100644
index 017f4a8..0000000
--- a/include/asm-x86/unistd_32.h
+++ /dev/null
@@ -1,379 +0,0 @@
-#ifndef ASM_X86__UNISTD_32_H
-#define ASM_X86__UNISTD_32_H
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall      0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_lchown		 16
-#define __NR_break		 17
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_mpx		 56
-#define __NR_setpgid		 57
-#define __NR_ulimit		 58
-#define __NR_oldolduname	 59
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76   /* Back compatible 2Gig limited rlimit */
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_ioperm		101
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_olduname		109
-#define __NR_iopl		110
-#define __NR_vhangup		111
-#define __NR_idle		112
-#define __NR_vm86old		113
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_modify_ldt		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_vm86		166
-#define __NR_query_module	167
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl              172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread64		180
-#define __NR_pwrite64		181
-#define __NR_chown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-#define __NR_getpmsg		188	/* some people actually want streams */
-#define __NR_putpmsg		189	/* some people actually want streams */
-#define __NR_vfork		190
-#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_lchown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_chown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_pivot_root		217
-#define __NR_mincore		218
-#define __NR_madvise		219
-#define __NR_madvise1		219	/* delete when C lib stub is removed */
-#define __NR_getdents64		220
-#define __NR_fcntl64		221
-/* 223 is unused */
-#define __NR_gettid		224
-#define __NR_readahead		225
-#define __NR_setxattr		226
-#define __NR_lsetxattr		227
-#define __NR_fsetxattr		228
-#define __NR_getxattr		229
-#define __NR_lgetxattr		230
-#define __NR_fgetxattr		231
-#define __NR_listxattr		232
-#define __NR_llistxattr		233
-#define __NR_flistxattr		234
-#define __NR_removexattr	235
-#define __NR_lremovexattr	236
-#define __NR_fremovexattr	237
-#define __NR_tkill		238
-#define __NR_sendfile64		239
-#define __NR_futex		240
-#define __NR_sched_setaffinity	241
-#define __NR_sched_getaffinity	242
-#define __NR_set_thread_area	243
-#define __NR_get_thread_area	244
-#define __NR_io_setup		245
-#define __NR_io_destroy		246
-#define __NR_io_getevents	247
-#define __NR_io_submit		248
-#define __NR_io_cancel		249
-#define __NR_fadvise64		250
-/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */
-#define __NR_exit_group		252
-#define __NR_lookup_dcookie	253
-#define __NR_epoll_create	254
-#define __NR_epoll_ctl		255
-#define __NR_epoll_wait		256
-#define __NR_remap_file_pages	257
-#define __NR_set_tid_address	258
-#define __NR_timer_create	259
-#define __NR_timer_settime	(__NR_timer_create+1)
-#define __NR_timer_gettime	(__NR_timer_create+2)
-#define __NR_timer_getoverrun	(__NR_timer_create+3)
-#define __NR_timer_delete	(__NR_timer_create+4)
-#define __NR_clock_settime	(__NR_timer_create+5)
-#define __NR_clock_gettime	(__NR_timer_create+6)
-#define __NR_clock_getres	(__NR_timer_create+7)
-#define __NR_clock_nanosleep	(__NR_timer_create+8)
-#define __NR_statfs64		268
-#define __NR_fstatfs64		269
-#define __NR_tgkill		270
-#define __NR_utimes		271
-#define __NR_fadvise64_64	272
-#define __NR_vserver		273
-#define __NR_mbind		274
-#define __NR_get_mempolicy	275
-#define __NR_set_mempolicy	276
-#define __NR_mq_open 		277
-#define __NR_mq_unlink		(__NR_mq_open+1)
-#define __NR_mq_timedsend	(__NR_mq_open+2)
-#define __NR_mq_timedreceive	(__NR_mq_open+3)
-#define __NR_mq_notify		(__NR_mq_open+4)
-#define __NR_mq_getsetattr	(__NR_mq_open+5)
-#define __NR_kexec_load		283
-#define __NR_waitid		284
-/* #define __NR_sys_setaltroot	285 */
-#define __NR_add_key		286
-#define __NR_request_key	287
-#define __NR_keyctl		288
-#define __NR_ioprio_set		289
-#define __NR_ioprio_get		290
-#define __NR_inotify_init	291
-#define __NR_inotify_add_watch	292
-#define __NR_inotify_rm_watch	293
-#define __NR_migrate_pages	294
-#define __NR_openat		295
-#define __NR_mkdirat		296
-#define __NR_mknodat		297
-#define __NR_fchownat		298
-#define __NR_futimesat		299
-#define __NR_fstatat64		300
-#define __NR_unlinkat		301
-#define __NR_renameat		302
-#define __NR_linkat		303
-#define __NR_symlinkat		304
-#define __NR_readlinkat		305
-#define __NR_fchmodat		306
-#define __NR_faccessat		307
-#define __NR_pselect6		308
-#define __NR_ppoll		309
-#define __NR_unshare		310
-#define __NR_set_robust_list	311
-#define __NR_get_robust_list	312
-#define __NR_splice		313
-#define __NR_sync_file_range	314
-#define __NR_tee		315
-#define __NR_vmsplice		316
-#define __NR_move_pages		317
-#define __NR_getcpu		318
-#define __NR_epoll_pwait	319
-#define __NR_utimensat		320
-#define __NR_signalfd		321
-#define __NR_timerfd_create	322
-#define __NR_eventfd		323
-#define __NR_fallocate		324
-#define __NR_timerfd_settime	325
-#define __NR_timerfd_gettime	326
-#define __NR_signalfd4		327
-#define __NR_eventfd2		328
-#define __NR_epoll_create1	329
-#define __NR_dup3		330
-#define __NR_pipe2		331
-#define __NR_inotify_init1	332
-
-#ifdef __KERNEL__
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#ifndef cond_syscall
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* ASM_X86__UNISTD_32_H */
diff --git a/include/asm-x86/unistd_64.h b/include/asm-x86/unistd_64.h
deleted file mode 100644
index ace83f1..0000000
--- a/include/asm-x86/unistd_64.h
+++ /dev/null
@@ -1,693 +0,0 @@
-#ifndef ASM_X86__UNISTD_64_H
-#define ASM_X86__UNISTD_64_H
-
-#ifndef __SYSCALL
-#define __SYSCALL(a, b)
-#endif
-
-/*
- * This file contains the system call numbers.
- *
- * Note: holes are not allowed.
- */
-
-/* at least 8 syscall per cacheline */
-#define __NR_read				0
-__SYSCALL(__NR_read, sys_read)
-#define __NR_write				1
-__SYSCALL(__NR_write, sys_write)
-#define __NR_open				2
-__SYSCALL(__NR_open, sys_open)
-#define __NR_close				3
-__SYSCALL(__NR_close, sys_close)
-#define __NR_stat				4
-__SYSCALL(__NR_stat, sys_newstat)
-#define __NR_fstat				5
-__SYSCALL(__NR_fstat, sys_newfstat)
-#define __NR_lstat				6
-__SYSCALL(__NR_lstat, sys_newlstat)
-#define __NR_poll				7
-__SYSCALL(__NR_poll, sys_poll)
-
-#define __NR_lseek				8
-__SYSCALL(__NR_lseek, sys_lseek)
-#define __NR_mmap				9
-__SYSCALL(__NR_mmap, sys_mmap)
-#define __NR_mprotect				10
-__SYSCALL(__NR_mprotect, sys_mprotect)
-#define __NR_munmap				11
-__SYSCALL(__NR_munmap, sys_munmap)
-#define __NR_brk				12
-__SYSCALL(__NR_brk, sys_brk)
-#define __NR_rt_sigaction			13
-__SYSCALL(__NR_rt_sigaction, sys_rt_sigaction)
-#define __NR_rt_sigprocmask			14
-__SYSCALL(__NR_rt_sigprocmask, sys_rt_sigprocmask)
-#define __NR_rt_sigreturn			15
-__SYSCALL(__NR_rt_sigreturn, stub_rt_sigreturn)
-
-#define __NR_ioctl				16
-__SYSCALL(__NR_ioctl, sys_ioctl)
-#define __NR_pread64				17
-__SYSCALL(__NR_pread64, sys_pread64)
-#define __NR_pwrite64				18
-__SYSCALL(__NR_pwrite64, sys_pwrite64)
-#define __NR_readv				19
-__SYSCALL(__NR_readv, sys_readv)
-#define __NR_writev				20
-__SYSCALL(__NR_writev, sys_writev)
-#define __NR_access				21
-__SYSCALL(__NR_access, sys_access)
-#define __NR_pipe				22
-__SYSCALL(__NR_pipe, sys_pipe)
-#define __NR_select				23
-__SYSCALL(__NR_select, sys_select)
-
-#define __NR_sched_yield			24
-__SYSCALL(__NR_sched_yield, sys_sched_yield)
-#define __NR_mremap				25
-__SYSCALL(__NR_mremap, sys_mremap)
-#define __NR_msync				26
-__SYSCALL(__NR_msync, sys_msync)
-#define __NR_mincore				27
-__SYSCALL(__NR_mincore, sys_mincore)
-#define __NR_madvise				28
-__SYSCALL(__NR_madvise, sys_madvise)
-#define __NR_shmget				29
-__SYSCALL(__NR_shmget, sys_shmget)
-#define __NR_shmat				30
-__SYSCALL(__NR_shmat, sys_shmat)
-#define __NR_shmctl				31
-__SYSCALL(__NR_shmctl, sys_shmctl)
-
-#define __NR_dup				32
-__SYSCALL(__NR_dup, sys_dup)
-#define __NR_dup2				33
-__SYSCALL(__NR_dup2, sys_dup2)
-#define __NR_pause				34
-__SYSCALL(__NR_pause, sys_pause)
-#define __NR_nanosleep				35
-__SYSCALL(__NR_nanosleep, sys_nanosleep)
-#define __NR_getitimer				36
-__SYSCALL(__NR_getitimer, sys_getitimer)
-#define __NR_alarm				37
-__SYSCALL(__NR_alarm, sys_alarm)
-#define __NR_setitimer				38
-__SYSCALL(__NR_setitimer, sys_setitimer)
-#define __NR_getpid				39
-__SYSCALL(__NR_getpid, sys_getpid)
-
-#define __NR_sendfile				40
-__SYSCALL(__NR_sendfile, sys_sendfile64)
-#define __NR_socket				41
-__SYSCALL(__NR_socket, sys_socket)
-#define __NR_connect				42
-__SYSCALL(__NR_connect, sys_connect)
-#define __NR_accept				43
-__SYSCALL(__NR_accept, sys_accept)
-#define __NR_sendto				44
-__SYSCALL(__NR_sendto, sys_sendto)
-#define __NR_recvfrom				45
-__SYSCALL(__NR_recvfrom, sys_recvfrom)
-#define __NR_sendmsg				46
-__SYSCALL(__NR_sendmsg, sys_sendmsg)
-#define __NR_recvmsg				47
-__SYSCALL(__NR_recvmsg, sys_recvmsg)
-
-#define __NR_shutdown				48
-__SYSCALL(__NR_shutdown, sys_shutdown)
-#define __NR_bind				49
-__SYSCALL(__NR_bind, sys_bind)
-#define __NR_listen				50
-__SYSCALL(__NR_listen, sys_listen)
-#define __NR_getsockname			51
-__SYSCALL(__NR_getsockname, sys_getsockname)
-#define __NR_getpeername			52
-__SYSCALL(__NR_getpeername, sys_getpeername)
-#define __NR_socketpair				53
-__SYSCALL(__NR_socketpair, sys_socketpair)
-#define __NR_setsockopt				54
-__SYSCALL(__NR_setsockopt, sys_setsockopt)
-#define __NR_getsockopt				55
-__SYSCALL(__NR_getsockopt, sys_getsockopt)
-
-#define __NR_clone				56
-__SYSCALL(__NR_clone, stub_clone)
-#define __NR_fork				57
-__SYSCALL(__NR_fork, stub_fork)
-#define __NR_vfork				58
-__SYSCALL(__NR_vfork, stub_vfork)
-#define __NR_execve				59
-__SYSCALL(__NR_execve, stub_execve)
-#define __NR_exit				60
-__SYSCALL(__NR_exit, sys_exit)
-#define __NR_wait4				61
-__SYSCALL(__NR_wait4, sys_wait4)
-#define __NR_kill				62
-__SYSCALL(__NR_kill, sys_kill)
-#define __NR_uname				63
-__SYSCALL(__NR_uname, sys_uname)
-
-#define __NR_semget				64
-__SYSCALL(__NR_semget, sys_semget)
-#define __NR_semop				65
-__SYSCALL(__NR_semop, sys_semop)
-#define __NR_semctl				66
-__SYSCALL(__NR_semctl, sys_semctl)
-#define __NR_shmdt				67
-__SYSCALL(__NR_shmdt, sys_shmdt)
-#define __NR_msgget				68
-__SYSCALL(__NR_msgget, sys_msgget)
-#define __NR_msgsnd				69
-__SYSCALL(__NR_msgsnd, sys_msgsnd)
-#define __NR_msgrcv				70
-__SYSCALL(__NR_msgrcv, sys_msgrcv)
-#define __NR_msgctl				71
-__SYSCALL(__NR_msgctl, sys_msgctl)
-
-#define __NR_fcntl				72
-__SYSCALL(__NR_fcntl, sys_fcntl)
-#define __NR_flock				73
-__SYSCALL(__NR_flock, sys_flock)
-#define __NR_fsync				74
-__SYSCALL(__NR_fsync, sys_fsync)
-#define __NR_fdatasync				75
-__SYSCALL(__NR_fdatasync, sys_fdatasync)
-#define __NR_truncate				76
-__SYSCALL(__NR_truncate, sys_truncate)
-#define __NR_ftruncate				77
-__SYSCALL(__NR_ftruncate, sys_ftruncate)
-#define __NR_getdents				78
-__SYSCALL(__NR_getdents, sys_getdents)
-#define __NR_getcwd				79
-__SYSCALL(__NR_getcwd, sys_getcwd)
-
-#define __NR_chdir				80
-__SYSCALL(__NR_chdir, sys_chdir)
-#define __NR_fchdir				81
-__SYSCALL(__NR_fchdir, sys_fchdir)
-#define __NR_rename				82
-__SYSCALL(__NR_rename, sys_rename)
-#define __NR_mkdir				83
-__SYSCALL(__NR_mkdir, sys_mkdir)
-#define __NR_rmdir				84
-__SYSCALL(__NR_rmdir, sys_rmdir)
-#define __NR_creat				85
-__SYSCALL(__NR_creat, sys_creat)
-#define __NR_link				86
-__SYSCALL(__NR_link, sys_link)
-#define __NR_unlink				87
-__SYSCALL(__NR_unlink, sys_unlink)
-
-#define __NR_symlink				88
-__SYSCALL(__NR_symlink, sys_symlink)
-#define __NR_readlink				89
-__SYSCALL(__NR_readlink, sys_readlink)
-#define __NR_chmod				90
-__SYSCALL(__NR_chmod, sys_chmod)
-#define __NR_fchmod				91
-__SYSCALL(__NR_fchmod, sys_fchmod)
-#define __NR_chown				92
-__SYSCALL(__NR_chown, sys_chown)
-#define __NR_fchown				93
-__SYSCALL(__NR_fchown, sys_fchown)
-#define __NR_lchown				94
-__SYSCALL(__NR_lchown, sys_lchown)
-#define __NR_umask				95
-__SYSCALL(__NR_umask, sys_umask)
-
-#define __NR_gettimeofday			96
-__SYSCALL(__NR_gettimeofday, sys_gettimeofday)
-#define __NR_getrlimit				97
-__SYSCALL(__NR_getrlimit, sys_getrlimit)
-#define __NR_getrusage				98
-__SYSCALL(__NR_getrusage, sys_getrusage)
-#define __NR_sysinfo				99
-__SYSCALL(__NR_sysinfo, sys_sysinfo)
-#define __NR_times				100
-__SYSCALL(__NR_times, sys_times)
-#define __NR_ptrace				101
-__SYSCALL(__NR_ptrace, sys_ptrace)
-#define __NR_getuid				102
-__SYSCALL(__NR_getuid, sys_getuid)
-#define __NR_syslog				103
-__SYSCALL(__NR_syslog, sys_syslog)
-
-/* at the very end the stuff that never runs during the benchmarks */
-#define __NR_getgid				104
-__SYSCALL(__NR_getgid, sys_getgid)
-#define __NR_setuid				105
-__SYSCALL(__NR_setuid, sys_setuid)
-#define __NR_setgid				106
-__SYSCALL(__NR_setgid, sys_setgid)
-#define __NR_geteuid				107
-__SYSCALL(__NR_geteuid, sys_geteuid)
-#define __NR_getegid				108
-__SYSCALL(__NR_getegid, sys_getegid)
-#define __NR_setpgid				109
-__SYSCALL(__NR_setpgid, sys_setpgid)
-#define __NR_getppid				110
-__SYSCALL(__NR_getppid, sys_getppid)
-#define __NR_getpgrp				111
-__SYSCALL(__NR_getpgrp, sys_getpgrp)
-
-#define __NR_setsid				112
-__SYSCALL(__NR_setsid, sys_setsid)
-#define __NR_setreuid				113
-__SYSCALL(__NR_setreuid, sys_setreuid)
-#define __NR_setregid				114
-__SYSCALL(__NR_setregid, sys_setregid)
-#define __NR_getgroups				115
-__SYSCALL(__NR_getgroups, sys_getgroups)
-#define __NR_setgroups				116
-__SYSCALL(__NR_setgroups, sys_setgroups)
-#define __NR_setresuid				117
-__SYSCALL(__NR_setresuid, sys_setresuid)
-#define __NR_getresuid				118
-__SYSCALL(__NR_getresuid, sys_getresuid)
-#define __NR_setresgid				119
-__SYSCALL(__NR_setresgid, sys_setresgid)
-
-#define __NR_getresgid				120
-__SYSCALL(__NR_getresgid, sys_getresgid)
-#define __NR_getpgid				121
-__SYSCALL(__NR_getpgid, sys_getpgid)
-#define __NR_setfsuid				122
-__SYSCALL(__NR_setfsuid, sys_setfsuid)
-#define __NR_setfsgid				123
-__SYSCALL(__NR_setfsgid, sys_setfsgid)
-#define __NR_getsid				124
-__SYSCALL(__NR_getsid, sys_getsid)
-#define __NR_capget				125
-__SYSCALL(__NR_capget, sys_capget)
-#define __NR_capset				126
-__SYSCALL(__NR_capset, sys_capset)
-
-#define __NR_rt_sigpending			127
-__SYSCALL(__NR_rt_sigpending, sys_rt_sigpending)
-#define __NR_rt_sigtimedwait			128
-__SYSCALL(__NR_rt_sigtimedwait, sys_rt_sigtimedwait)
-#define __NR_rt_sigqueueinfo			129
-__SYSCALL(__NR_rt_sigqueueinfo, sys_rt_sigqueueinfo)
-#define __NR_rt_sigsuspend			130
-__SYSCALL(__NR_rt_sigsuspend, sys_rt_sigsuspend)
-#define __NR_sigaltstack			131
-__SYSCALL(__NR_sigaltstack, stub_sigaltstack)
-#define __NR_utime				132
-__SYSCALL(__NR_utime, sys_utime)
-#define __NR_mknod				133
-__SYSCALL(__NR_mknod, sys_mknod)
-
-/* Only needed for a.out */
-#define __NR_uselib				134
-__SYSCALL(__NR_uselib, sys_ni_syscall)
-#define __NR_personality			135
-__SYSCALL(__NR_personality, sys_personality)
-
-#define __NR_ustat				136
-__SYSCALL(__NR_ustat, sys_ustat)
-#define __NR_statfs				137
-__SYSCALL(__NR_statfs, sys_statfs)
-#define __NR_fstatfs				138
-__SYSCALL(__NR_fstatfs, sys_fstatfs)
-#define __NR_sysfs				139
-__SYSCALL(__NR_sysfs, sys_sysfs)
-
-#define __NR_getpriority			140
-__SYSCALL(__NR_getpriority, sys_getpriority)
-#define __NR_setpriority			141
-__SYSCALL(__NR_setpriority, sys_setpriority)
-#define __NR_sched_setparam			142
-__SYSCALL(__NR_sched_setparam, sys_sched_setparam)
-#define __NR_sched_getparam			143
-__SYSCALL(__NR_sched_getparam, sys_sched_getparam)
-#define __NR_sched_setscheduler			144
-__SYSCALL(__NR_sched_setscheduler, sys_sched_setscheduler)
-#define __NR_sched_getscheduler			145
-__SYSCALL(__NR_sched_getscheduler, sys_sched_getscheduler)
-#define __NR_sched_get_priority_max		146
-__SYSCALL(__NR_sched_get_priority_max, sys_sched_get_priority_max)
-#define __NR_sched_get_priority_min		147
-__SYSCALL(__NR_sched_get_priority_min, sys_sched_get_priority_min)
-#define __NR_sched_rr_get_interval		148
-__SYSCALL(__NR_sched_rr_get_interval, sys_sched_rr_get_interval)
-
-#define __NR_mlock				149
-__SYSCALL(__NR_mlock, sys_mlock)
-#define __NR_munlock				150
-__SYSCALL(__NR_munlock, sys_munlock)
-#define __NR_mlockall				151
-__SYSCALL(__NR_mlockall, sys_mlockall)
-#define __NR_munlockall				152
-__SYSCALL(__NR_munlockall, sys_munlockall)
-
-#define __NR_vhangup				153
-__SYSCALL(__NR_vhangup, sys_vhangup)
-
-#define __NR_modify_ldt				154
-__SYSCALL(__NR_modify_ldt, sys_modify_ldt)
-
-#define __NR_pivot_root				155
-__SYSCALL(__NR_pivot_root, sys_pivot_root)
-
-#define __NR__sysctl				156
-__SYSCALL(__NR__sysctl, sys_sysctl)
-
-#define __NR_prctl				157
-__SYSCALL(__NR_prctl, sys_prctl)
-#define __NR_arch_prctl				158
-__SYSCALL(__NR_arch_prctl, sys_arch_prctl)
-
-#define __NR_adjtimex				159
-__SYSCALL(__NR_adjtimex, sys_adjtimex)
-
-#define __NR_setrlimit				160
-__SYSCALL(__NR_setrlimit, sys_setrlimit)
-
-#define __NR_chroot				161
-__SYSCALL(__NR_chroot, sys_chroot)
-
-#define __NR_sync				162
-__SYSCALL(__NR_sync, sys_sync)
-
-#define __NR_acct				163
-__SYSCALL(__NR_acct, sys_acct)
-
-#define __NR_settimeofday			164
-__SYSCALL(__NR_settimeofday, sys_settimeofday)
-
-#define __NR_mount				165
-__SYSCALL(__NR_mount, sys_mount)
-#define __NR_umount2				166
-__SYSCALL(__NR_umount2, sys_umount)
-
-#define __NR_swapon				167
-__SYSCALL(__NR_swapon, sys_swapon)
-#define __NR_swapoff				168
-__SYSCALL(__NR_swapoff, sys_swapoff)
-
-#define __NR_reboot				169
-__SYSCALL(__NR_reboot, sys_reboot)
-
-#define __NR_sethostname			170
-__SYSCALL(__NR_sethostname, sys_sethostname)
-#define __NR_setdomainname			171
-__SYSCALL(__NR_setdomainname, sys_setdomainname)
-
-#define __NR_iopl				172
-__SYSCALL(__NR_iopl, stub_iopl)
-#define __NR_ioperm				173
-__SYSCALL(__NR_ioperm, sys_ioperm)
-
-#define __NR_create_module			174
-__SYSCALL(__NR_create_module, sys_ni_syscall)
-#define __NR_init_module			175
-__SYSCALL(__NR_init_module, sys_init_module)
-#define __NR_delete_module			176
-__SYSCALL(__NR_delete_module, sys_delete_module)
-#define __NR_get_kernel_syms			177
-__SYSCALL(__NR_get_kernel_syms, sys_ni_syscall)
-#define __NR_query_module			178
-__SYSCALL(__NR_query_module, sys_ni_syscall)
-
-#define __NR_quotactl				179
-__SYSCALL(__NR_quotactl, sys_quotactl)
-
-#define __NR_nfsservctl				180
-__SYSCALL(__NR_nfsservctl, sys_nfsservctl)
-
-/* reserved for LiS/STREAMS */
-#define __NR_getpmsg				181
-__SYSCALL(__NR_getpmsg, sys_ni_syscall)
-#define __NR_putpmsg				182
-__SYSCALL(__NR_putpmsg, sys_ni_syscall)
-
-/* reserved for AFS */
-#define __NR_afs_syscall			183
-__SYSCALL(__NR_afs_syscall, sys_ni_syscall)
-
-/* reserved for tux */
-#define __NR_tuxcall				184
-__SYSCALL(__NR_tuxcall, sys_ni_syscall)
-
-#define __NR_security				185
-__SYSCALL(__NR_security, sys_ni_syscall)
-
-#define __NR_gettid				186
-__SYSCALL(__NR_gettid, sys_gettid)
-
-#define __NR_readahead				187
-__SYSCALL(__NR_readahead, sys_readahead)
-#define __NR_setxattr				188
-__SYSCALL(__NR_setxattr, sys_setxattr)
-#define __NR_lsetxattr				189
-__SYSCALL(__NR_lsetxattr, sys_lsetxattr)
-#define __NR_fsetxattr				190
-__SYSCALL(__NR_fsetxattr, sys_fsetxattr)
-#define __NR_getxattr				191
-__SYSCALL(__NR_getxattr, sys_getxattr)
-#define __NR_lgetxattr				192
-__SYSCALL(__NR_lgetxattr, sys_lgetxattr)
-#define __NR_fgetxattr				193
-__SYSCALL(__NR_fgetxattr, sys_fgetxattr)
-#define __NR_listxattr				194
-__SYSCALL(__NR_listxattr, sys_listxattr)
-#define __NR_llistxattr				195
-__SYSCALL(__NR_llistxattr, sys_llistxattr)
-#define __NR_flistxattr				196
-__SYSCALL(__NR_flistxattr, sys_flistxattr)
-#define __NR_removexattr			197
-__SYSCALL(__NR_removexattr, sys_removexattr)
-#define __NR_lremovexattr			198
-__SYSCALL(__NR_lremovexattr, sys_lremovexattr)
-#define __NR_fremovexattr			199
-__SYSCALL(__NR_fremovexattr, sys_fremovexattr)
-#define __NR_tkill				200
-__SYSCALL(__NR_tkill, sys_tkill)
-#define __NR_time				201
-__SYSCALL(__NR_time, sys_time)
-#define __NR_futex				202
-__SYSCALL(__NR_futex, sys_futex)
-#define __NR_sched_setaffinity			203
-__SYSCALL(__NR_sched_setaffinity, sys_sched_setaffinity)
-#define __NR_sched_getaffinity			204
-__SYSCALL(__NR_sched_getaffinity, sys_sched_getaffinity)
-#define __NR_set_thread_area			205
-__SYSCALL(__NR_set_thread_area, sys_ni_syscall)	/* use arch_prctl */
-#define __NR_io_setup				206
-__SYSCALL(__NR_io_setup, sys_io_setup)
-#define __NR_io_destroy				207
-__SYSCALL(__NR_io_destroy, sys_io_destroy)
-#define __NR_io_getevents			208
-__SYSCALL(__NR_io_getevents, sys_io_getevents)
-#define __NR_io_submit				209
-__SYSCALL(__NR_io_submit, sys_io_submit)
-#define __NR_io_cancel				210
-__SYSCALL(__NR_io_cancel, sys_io_cancel)
-#define __NR_get_thread_area			211
-__SYSCALL(__NR_get_thread_area, sys_ni_syscall)	/* use arch_prctl */
-#define __NR_lookup_dcookie			212
-__SYSCALL(__NR_lookup_dcookie, sys_lookup_dcookie)
-#define __NR_epoll_create			213
-__SYSCALL(__NR_epoll_create, sys_epoll_create)
-#define __NR_epoll_ctl_old			214
-__SYSCALL(__NR_epoll_ctl_old, sys_ni_syscall)
-#define __NR_epoll_wait_old			215
-__SYSCALL(__NR_epoll_wait_old, sys_ni_syscall)
-#define __NR_remap_file_pages			216
-__SYSCALL(__NR_remap_file_pages, sys_remap_file_pages)
-#define __NR_getdents64				217
-__SYSCALL(__NR_getdents64, sys_getdents64)
-#define __NR_set_tid_address			218
-__SYSCALL(__NR_set_tid_address, sys_set_tid_address)
-#define __NR_restart_syscall			219
-__SYSCALL(__NR_restart_syscall, sys_restart_syscall)
-#define __NR_semtimedop				220
-__SYSCALL(__NR_semtimedop, sys_semtimedop)
-#define __NR_fadvise64				221
-__SYSCALL(__NR_fadvise64, sys_fadvise64)
-#define __NR_timer_create			222
-__SYSCALL(__NR_timer_create, sys_timer_create)
-#define __NR_timer_settime			223
-__SYSCALL(__NR_timer_settime, sys_timer_settime)
-#define __NR_timer_gettime			224
-__SYSCALL(__NR_timer_gettime, sys_timer_gettime)
-#define __NR_timer_getoverrun			225
-__SYSCALL(__NR_timer_getoverrun, sys_timer_getoverrun)
-#define __NR_timer_delete			226
-__SYSCALL(__NR_timer_delete, sys_timer_delete)
-#define __NR_clock_settime			227
-__SYSCALL(__NR_clock_settime, sys_clock_settime)
-#define __NR_clock_gettime			228
-__SYSCALL(__NR_clock_gettime, sys_clock_gettime)
-#define __NR_clock_getres			229
-__SYSCALL(__NR_clock_getres, sys_clock_getres)
-#define __NR_clock_nanosleep			230
-__SYSCALL(__NR_clock_nanosleep, sys_clock_nanosleep)
-#define __NR_exit_group				231
-__SYSCALL(__NR_exit_group, sys_exit_group)
-#define __NR_epoll_wait				232
-__SYSCALL(__NR_epoll_wait, sys_epoll_wait)
-#define __NR_epoll_ctl				233
-__SYSCALL(__NR_epoll_ctl, sys_epoll_ctl)
-#define __NR_tgkill				234
-__SYSCALL(__NR_tgkill, sys_tgkill)
-#define __NR_utimes				235
-__SYSCALL(__NR_utimes, sys_utimes)
-#define __NR_vserver				236
-__SYSCALL(__NR_vserver, sys_ni_syscall)
-#define __NR_mbind				237
-__SYSCALL(__NR_mbind, sys_mbind)
-#define __NR_set_mempolicy			238
-__SYSCALL(__NR_set_mempolicy, sys_set_mempolicy)
-#define __NR_get_mempolicy			239
-__SYSCALL(__NR_get_mempolicy, sys_get_mempolicy)
-#define __NR_mq_open				240
-__SYSCALL(__NR_mq_open, sys_mq_open)
-#define __NR_mq_unlink				241
-__SYSCALL(__NR_mq_unlink, sys_mq_unlink)
-#define __NR_mq_timedsend			242
-__SYSCALL(__NR_mq_timedsend, sys_mq_timedsend)
-#define __NR_mq_timedreceive			243
-__SYSCALL(__NR_mq_timedreceive, sys_mq_timedreceive)
-#define __NR_mq_notify				244
-__SYSCALL(__NR_mq_notify, sys_mq_notify)
-#define __NR_mq_getsetattr			245
-__SYSCALL(__NR_mq_getsetattr, sys_mq_getsetattr)
-#define __NR_kexec_load				246
-__SYSCALL(__NR_kexec_load, sys_kexec_load)
-#define __NR_waitid				247
-__SYSCALL(__NR_waitid, sys_waitid)
-#define __NR_add_key				248
-__SYSCALL(__NR_add_key, sys_add_key)
-#define __NR_request_key			249
-__SYSCALL(__NR_request_key, sys_request_key)
-#define __NR_keyctl				250
-__SYSCALL(__NR_keyctl, sys_keyctl)
-#define __NR_ioprio_set				251
-__SYSCALL(__NR_ioprio_set, sys_ioprio_set)
-#define __NR_ioprio_get				252
-__SYSCALL(__NR_ioprio_get, sys_ioprio_get)
-#define __NR_inotify_init			253
-__SYSCALL(__NR_inotify_init, sys_inotify_init)
-#define __NR_inotify_add_watch			254
-__SYSCALL(__NR_inotify_add_watch, sys_inotify_add_watch)
-#define __NR_inotify_rm_watch			255
-__SYSCALL(__NR_inotify_rm_watch, sys_inotify_rm_watch)
-#define __NR_migrate_pages			256
-__SYSCALL(__NR_migrate_pages, sys_migrate_pages)
-#define __NR_openat				257
-__SYSCALL(__NR_openat, sys_openat)
-#define __NR_mkdirat				258
-__SYSCALL(__NR_mkdirat, sys_mkdirat)
-#define __NR_mknodat				259
-__SYSCALL(__NR_mknodat, sys_mknodat)
-#define __NR_fchownat				260
-__SYSCALL(__NR_fchownat, sys_fchownat)
-#define __NR_futimesat				261
-__SYSCALL(__NR_futimesat, sys_futimesat)
-#define __NR_newfstatat				262
-__SYSCALL(__NR_newfstatat, sys_newfstatat)
-#define __NR_unlinkat				263
-__SYSCALL(__NR_unlinkat, sys_unlinkat)
-#define __NR_renameat				264
-__SYSCALL(__NR_renameat, sys_renameat)
-#define __NR_linkat				265
-__SYSCALL(__NR_linkat, sys_linkat)
-#define __NR_symlinkat				266
-__SYSCALL(__NR_symlinkat, sys_symlinkat)
-#define __NR_readlinkat				267
-__SYSCALL(__NR_readlinkat, sys_readlinkat)
-#define __NR_fchmodat				268
-__SYSCALL(__NR_fchmodat, sys_fchmodat)
-#define __NR_faccessat				269
-__SYSCALL(__NR_faccessat, sys_faccessat)
-#define __NR_pselect6				270
-__SYSCALL(__NR_pselect6, sys_pselect6)
-#define __NR_ppoll				271
-__SYSCALL(__NR_ppoll,	sys_ppoll)
-#define __NR_unshare				272
-__SYSCALL(__NR_unshare,	sys_unshare)
-#define __NR_set_robust_list			273
-__SYSCALL(__NR_set_robust_list, sys_set_robust_list)
-#define __NR_get_robust_list			274
-__SYSCALL(__NR_get_robust_list, sys_get_robust_list)
-#define __NR_splice				275
-__SYSCALL(__NR_splice, sys_splice)
-#define __NR_tee				276
-__SYSCALL(__NR_tee, sys_tee)
-#define __NR_sync_file_range			277
-__SYSCALL(__NR_sync_file_range, sys_sync_file_range)
-#define __NR_vmsplice				278
-__SYSCALL(__NR_vmsplice, sys_vmsplice)
-#define __NR_move_pages				279
-__SYSCALL(__NR_move_pages, sys_move_pages)
-#define __NR_utimensat				280
-__SYSCALL(__NR_utimensat, sys_utimensat)
-#define __IGNORE_getcpu		/* implemented as a vsyscall */
-#define __NR_epoll_pwait			281
-__SYSCALL(__NR_epoll_pwait, sys_epoll_pwait)
-#define __NR_signalfd				282
-__SYSCALL(__NR_signalfd, sys_signalfd)
-#define __NR_timerfd_create			283
-__SYSCALL(__NR_timerfd_create, sys_timerfd_create)
-#define __NR_eventfd				284
-__SYSCALL(__NR_eventfd, sys_eventfd)
-#define __NR_fallocate				285
-__SYSCALL(__NR_fallocate, sys_fallocate)
-#define __NR_timerfd_settime			286
-__SYSCALL(__NR_timerfd_settime, sys_timerfd_settime)
-#define __NR_timerfd_gettime			287
-__SYSCALL(__NR_timerfd_gettime, sys_timerfd_gettime)
-#define __NR_paccept				288
-__SYSCALL(__NR_paccept, sys_paccept)
-#define __NR_signalfd4				289
-__SYSCALL(__NR_signalfd4, sys_signalfd4)
-#define __NR_eventfd2				290
-__SYSCALL(__NR_eventfd2, sys_eventfd2)
-#define __NR_epoll_create1			291
-__SYSCALL(__NR_epoll_create1, sys_epoll_create1)
-#define __NR_dup3				292
-__SYSCALL(__NR_dup3, sys_dup3)
-#define __NR_pipe2				293
-__SYSCALL(__NR_pipe2, sys_pipe2)
-#define __NR_inotify_init1			294
-__SYSCALL(__NR_inotify_init1, sys_inotify_init1)
-
-
-#ifndef __NO_STUBS
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_COMPAT_SYS_TIME
-#endif	/* __NO_STUBS */
-
-#ifdef __KERNEL__
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-#endif	/* __KERNEL__ */
-
-#endif /* ASM_X86__UNISTD_64_H */
diff --git a/include/asm-x86/unwind.h b/include/asm-x86/unwind.h
deleted file mode 100644
index a215156..0000000
--- a/include/asm-x86/unwind.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef ASM_X86__UNWIND_H
-#define ASM_X86__UNWIND_H
-
-#define UNW_PC(frame) ((void)(frame), 0UL)
-#define UNW_SP(frame) ((void)(frame), 0UL)
-#define UNW_FP(frame) ((void)(frame), 0UL)
-
-static inline int arch_unw_user_mode(const void *info)
-{
-	return 0;
-}
-
-#endif /* ASM_X86__UNWIND_H */
diff --git a/include/asm-x86/user32.h b/include/asm-x86/user32.h
deleted file mode 100644
index aa66c18..0000000
--- a/include/asm-x86/user32.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef ASM_X86__USER32_H
-#define ASM_X86__USER32_H
-
-/* IA32 compatible user structures for ptrace.
- * These should be used for 32bit coredumps too. */
-
-struct user_i387_ia32_struct {
-	u32	cwd;
-	u32	swd;
-	u32	twd;
-	u32	fip;
-	u32	fcs;
-	u32	foo;
-	u32	fos;
-	u32	st_space[20];   /* 8*10 bytes for each FP-reg = 80 bytes */
-};
-
-/* FSAVE frame with extensions */
-struct user32_fxsr_struct {
-	unsigned short	cwd;
-	unsigned short	swd;
-	unsigned short	twd;	/* not compatible to 64bit twd */
-	unsigned short	fop;
-	int	fip;
-	int	fcs;
-	int	foo;
-	int	fos;
-	int	mxcsr;
-	int	reserved;
-	int	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
-	int	xmm_space[32];	/* 8*16 bytes for each XMM-reg = 128 bytes */
-	int	padding[56];
-};
-
-struct user_regs_struct32 {
-	__u32 ebx, ecx, edx, esi, edi, ebp, eax;
-	unsigned short ds, __ds, es, __es;
-	unsigned short fs, __fs, gs, __gs;
-	__u32 orig_eax, eip;
-	unsigned short cs, __cs;
-	__u32 eflags, esp;
-	unsigned short ss, __ss;
-};
-
-struct user32 {
-  struct user_regs_struct32 regs; /* Where the registers are actually stored */
-  int u_fpvalid;		/* True if math co-processor being used. */
-				/* for this mess. Not yet used. */
-  struct user_i387_ia32_struct i387;	/* Math Co-processor registers. */
-/* The rest of this junk is to help gdb figure out what goes where */
-  __u32 u_tsize;	/* Text segment size (pages). */
-  __u32 u_dsize;	/* Data segment size (pages). */
-  __u32 u_ssize;	/* Stack segment size (pages). */
-  __u32 start_code;     /* Starting virtual address of text. */
-  __u32 start_stack;	/* Starting virtual address of stack area.
-				   This is actually the bottom of the stack,
-				   the top of the stack is always found in the
-				   esp register.  */
-  __u32 signal;     		/* Signal that caused the core dump. */
-  int reserved;			/* No __u32er used */
-  __u32 u_ar0;	/* Used by gdb to help find the values for */
-				/* the registers. */
-  __u32 u_fpstate;	/* Math Co-processor pointer. */
-  __u32 magic;		/* To uniquely identify a core file */
-  char u_comm[32];		/* User command that was responsible */
-  int u_debugreg[8];
-};
-
-
-#endif /* ASM_X86__USER32_H */
diff --git a/include/asm-x86/user_32.h b/include/asm-x86/user_32.h
deleted file mode 100644
index e0fe2f5..0000000
--- a/include/asm-x86/user_32.h
+++ /dev/null
@@ -1,131 +0,0 @@
-#ifndef ASM_X86__USER_32_H
-#define ASM_X86__USER_32_H
-
-#include <asm/page.h>
-/* Core file format: The core file is written in such a way that gdb
-   can understand it and provide useful information to the user (under
-   linux we use the 'trad-core' bfd).  There are quite a number of
-   obstacles to being able to view the contents of the floating point
-   registers, and until these are solved you will not be able to view the
-   contents of them.  Actually, you can read in the core file and look at
-   the contents of the user struct to find out what the floating point
-   registers contain.
-   The actual file contents are as follows:
-   UPAGE: 1 page consisting of a user struct that tells gdb what is present
-   in the file.  Directly after this is a copy of the task_struct, which
-   is currently not used by gdb, but it may come in useful at some point.
-   All of the registers are stored as part of the upage.  The upage should
-   always be only one page.
-   DATA: The data area is stored.  We use current->end_text to
-   current->brk to pick up all of the user variables, plus any memory
-   that may have been malloced.  No attempt is made to determine if a page
-   is demand-zero or if a page is totally unused, we just cover the entire
-   range.  All of the addresses are rounded in such a way that an integral
-   number of pages is written.
-   STACK: We need the stack information in order to get a meaningful
-   backtrace.  We need to write the data from (esp) to
-   current->start_stack, so we round each of these off in order to be able
-   to write an integer number of pages.
-   The minimum core file size is 3 pages, or 12288 bytes.
-*/
-
-/*
- * Pentium III FXSR, SSE support
- *	Gareth Hughes <gareth@valinux.com>, May 2000
- *
- * Provide support for the GDB 5.0+ PTRACE_{GET|SET}FPXREGS requests for
- * interacting with the FXSR-format floating point environment.  Floating
- * point data can be accessed in the regular format in the usual manner,
- * and both the standard and SIMD floating point data can be accessed via
- * the new ptrace requests.  In either case, changes to the FPU environment
- * will be reflected in the task's state as expected.
- */
-
-struct user_i387_struct {
-	long	cwd;
-	long	swd;
-	long	twd;
-	long	fip;
-	long	fcs;
-	long	foo;
-	long	fos;
-	long	st_space[20];	/* 8*10 bytes for each FP-reg = 80 bytes */
-};
-
-struct user_fxsr_struct {
-	unsigned short	cwd;
-	unsigned short	swd;
-	unsigned short	twd;
-	unsigned short	fop;
-	long	fip;
-	long	fcs;
-	long	foo;
-	long	fos;
-	long	mxcsr;
-	long	reserved;
-	long	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
-	long	xmm_space[32];	/* 8*16 bytes for each XMM-reg = 128 bytes */
-	long	padding[56];
-};
-
-/*
- * This is the old layout of "struct pt_regs", and
- * is still the layout used by user mode (the new
- * pt_regs doesn't have all registers as the kernel
- * doesn't use the extra segment registers)
- */
-struct user_regs_struct {
-	unsigned long	bx;
-	unsigned long	cx;
-	unsigned long	dx;
-	unsigned long	si;
-	unsigned long	di;
-	unsigned long	bp;
-	unsigned long	ax;
-	unsigned long	ds;
-	unsigned long	es;
-	unsigned long	fs;
-	unsigned long	gs;
-	unsigned long	orig_ax;
-	unsigned long	ip;
-	unsigned long	cs;
-	unsigned long	flags;
-	unsigned long	sp;
-	unsigned long	ss;
-};
-
-/* When the kernel dumps core, it starts by dumping the user struct -
-   this will be used by gdb to figure out where the data and stack segments
-   are within the file, and what virtual addresses to use. */
-struct user{
-/* We start with the registers, to mimic the way that "memory" is returned
-   from the ptrace(3,...) function.  */
-  struct user_regs_struct regs;	/* Where the registers are actually stored */
-/* ptrace does not yet supply these.  Someday.... */
-  int u_fpvalid;		/* True if math co-processor being used. */
-				/* for this mess. Not yet used. */
-  struct user_i387_struct i387;	/* Math Co-processor registers. */
-/* The rest of this junk is to help gdb figure out what goes where */
-  unsigned long int u_tsize;	/* Text segment size (pages). */
-  unsigned long int u_dsize;	/* Data segment size (pages). */
-  unsigned long int u_ssize;	/* Stack segment size (pages). */
-  unsigned long start_code;     /* Starting virtual address of text. */
-  unsigned long start_stack;	/* Starting virtual address of stack area.
-				   This is actually the bottom of the stack,
-				   the top of the stack is always found in the
-				   esp register.  */
-  long int signal;     		/* Signal that caused the core dump. */
-  int reserved;			/* No longer used */
-  unsigned long u_ar0;		/* Used by gdb to help find the values for */
-				/* the registers. */
-  struct user_i387_struct *u_fpstate;	/* Math Co-processor pointer. */
-  unsigned long magic;		/* To uniquely identify a core file */
-  char u_comm[32];		/* User command that was responsible */
-  int u_debugreg[8];
-};
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif /* ASM_X86__USER_32_H */
diff --git a/include/asm-x86/user_64.h b/include/asm-x86/user_64.h
deleted file mode 100644
index 38b5799..0000000
--- a/include/asm-x86/user_64.h
+++ /dev/null
@@ -1,137 +0,0 @@
-#ifndef ASM_X86__USER_64_H
-#define ASM_X86__USER_64_H
-
-#include <asm/types.h>
-#include <asm/page.h>
-/* Core file format: The core file is written in such a way that gdb
-   can understand it and provide useful information to the user.
-   There are quite a number of obstacles to being able to view the
-   contents of the floating point registers, and until these are
-   solved you will not be able to view the contents of them.
-   Actually, you can read in the core file and look at the contents of
-   the user struct to find out what the floating point registers
-   contain.
-
-   The actual file contents are as follows:
-   UPAGE: 1 page consisting of a user struct that tells gdb what is present
-   in the file.  Directly after this is a copy of the task_struct, which
-   is currently not used by gdb, but it may come in useful at some point.
-   All of the registers are stored as part of the upage.  The upage should
-   always be only one page.
-   DATA: The data area is stored.  We use current->end_text to
-   current->brk to pick up all of the user variables, plus any memory
-   that may have been malloced.  No attempt is made to determine if a page
-   is demand-zero or if a page is totally unused, we just cover the entire
-   range.  All of the addresses are rounded in such a way that an integral
-   number of pages is written.
-   STACK: We need the stack information in order to get a meaningful
-   backtrace.  We need to write the data from (esp) to
-   current->start_stack, so we round each of these off in order to be able
-   to write an integer number of pages.
-   The minimum core file size is 3 pages, or 12288 bytes.  */
-
-/*
- * Pentium III FXSR, SSE support
- *	Gareth Hughes <gareth@valinux.com>, May 2000
- *
- * Provide support for the GDB 5.0+ PTRACE_{GET|SET}FPXREGS requests for
- * interacting with the FXSR-format floating point environment.  Floating
- * point data can be accessed in the regular format in the usual manner,
- * and both the standard and SIMD floating point data can be accessed via
- * the new ptrace requests.  In either case, changes to the FPU environment
- * will be reflected in the task's state as expected.
- *
- * x86-64 support by Andi Kleen.
- */
-
-/* This matches the 64bit FXSAVE format as defined by AMD. It is the same
-   as the 32bit format defined by Intel, except that the selector:offset pairs
-   for data and eip are replaced with flat 64bit pointers. */
-struct user_i387_struct {
-	unsigned short	cwd;
-	unsigned short	swd;
-	unsigned short	twd;	/* Note this is not the same as
-				   the 32bit/x87/FSAVE twd */
-	unsigned short	fop;
-	__u64	rip;
-	__u64	rdp;
-	__u32	mxcsr;
-	__u32	mxcsr_mask;
-	__u32	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
-	__u32	xmm_space[64];	/* 16*16 bytes for each XMM-reg = 256 bytes */
-	__u32	padding[24];
-};
-
-/*
- * Segment register layout in coredumps.
- */
-struct user_regs_struct {
-	unsigned long	r15;
-	unsigned long	r14;
-	unsigned long	r13;
-	unsigned long	r12;
-	unsigned long	bp;
-	unsigned long	bx;
-	unsigned long	r11;
-	unsigned long	r10;
-	unsigned long	r9;
-	unsigned long	r8;
-	unsigned long	ax;
-	unsigned long	cx;
-	unsigned long	dx;
-	unsigned long	si;
-	unsigned long	di;
-	unsigned long	orig_ax;
-	unsigned long	ip;
-	unsigned long	cs;
-	unsigned long	flags;
-	unsigned long	sp;
-	unsigned long	ss;
-	unsigned long	fs_base;
-	unsigned long	gs_base;
-	unsigned long	ds;
-	unsigned long	es;
-	unsigned long	fs;
-	unsigned long	gs;
-};
-
-/* When the kernel dumps core, it starts by dumping the user struct -
-   this will be used by gdb to figure out where the data and stack segments
-   are within the file, and what virtual addresses to use. */
-
-struct user {
-/* We start with the registers, to mimic the way that "memory" is returned
-   from the ptrace(3,...) function.  */
-  struct user_regs_struct regs;	/* Where the registers are actually stored */
-/* ptrace does not yet supply these.  Someday.... */
-  int u_fpvalid;		/* True if math co-processor being used. */
-				/* for this mess. Not yet used. */
-  int pad0;
-  struct user_i387_struct i387;	/* Math Co-processor registers. */
-/* The rest of this junk is to help gdb figure out what goes where */
-  unsigned long int u_tsize;	/* Text segment size (pages). */
-  unsigned long int u_dsize;	/* Data segment size (pages). */
-  unsigned long int u_ssize;	/* Stack segment size (pages). */
-  unsigned long start_code;     /* Starting virtual address of text. */
-  unsigned long start_stack;	/* Starting virtual address of stack area.
-				   This is actually the bottom of the stack,
-				   the top of the stack is always found in the
-				   esp register.  */
-  long int signal;		/* Signal that caused the core dump. */
-  int reserved;			/* No longer used */
-  int pad1;
-  unsigned long u_ar0;		/* Used by gdb to help find the values for */
-				/* the registers. */
-  struct user_i387_struct *u_fpstate;	/* Math Co-processor pointer. */
-  unsigned long magic;		/* To uniquely identify a core file */
-  char u_comm[32];		/* User command that was responsible */
-  unsigned long u_debugreg[8];
-  unsigned long error_code; /* CPU error code or 0 */
-  unsigned long fault_address; /* CR3 or 0 */
-};
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif /* ASM_X86__USER_64_H */
diff --git a/include/asm-x86/uv/bios.h b/include/asm-x86/uv/bios.h
deleted file mode 100644
index 215f196..0000000
--- a/include/asm-x86/uv/bios.h
+++ /dev/null
@@ -1,94 +0,0 @@
-#ifndef ASM_X86__UV__BIOS_H
-#define ASM_X86__UV__BIOS_H
-
-/*
- * UV BIOS layer definitions.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
- *  Copyright (c) Russ Anderson
- */
-
-#include <linux/rtc.h>
-
-/*
- * Values for the BIOS calls.  It is passed as the first * argument in the
- * BIOS call.  Passing any other value in the first argument will result
- * in a BIOS_STATUS_UNIMPLEMENTED return status.
- */
-enum uv_bios_cmd {
-	UV_BIOS_COMMON,
-	UV_BIOS_GET_SN_INFO,
-	UV_BIOS_FREQ_BASE
-};
-
-/*
- * Status values returned from a BIOS call.
- */
-enum {
-	BIOS_STATUS_SUCCESS		=  0,
-	BIOS_STATUS_UNIMPLEMENTED	= -ENOSYS,
-	BIOS_STATUS_EINVAL		= -EINVAL,
-	BIOS_STATUS_UNAVAIL		= -EBUSY
-};
-
-/*
- * The UV system table describes specific firmware
- * capabilities available to the Linux kernel at runtime.
- */
-struct uv_systab {
-	char signature[4];	/* must be "UVST" */
-	u32 revision;		/* distinguish different firmware revs */
-	u64 function;		/* BIOS runtime callback function ptr */
-};
-
-enum {
-	BIOS_FREQ_BASE_PLATFORM = 0,
-	BIOS_FREQ_BASE_INTERVAL_TIMER = 1,
-	BIOS_FREQ_BASE_REALTIME_CLOCK = 2
-};
-
-union partition_info_u {
-	u64	val;
-	struct {
-		u64	hub_version	:  8,
-			partition_id	: 16,
-			coherence_id	: 16,
-			region_size	: 24;
-	};
-};
-
-/*
- * bios calls have 6 parameters
- */
-extern s64 uv_bios_call(enum uv_bios_cmd, u64, u64, u64, u64, u64);
-extern s64 uv_bios_call_irqsave(enum uv_bios_cmd, u64, u64, u64, u64, u64);
-extern s64 uv_bios_call_reentrant(enum uv_bios_cmd, u64, u64, u64, u64, u64);
-
-extern s64 uv_bios_get_sn_info(int, int *, long *, long *, long *);
-extern s64 uv_bios_freq_base(u64, u64 *);
-
-extern void uv_bios_init(void);
-
-extern int uv_type;
-extern long sn_partition_id;
-extern long uv_coherency_id;
-extern long uv_region_size;
-#define partition_coherence_id()	(uv_coherency_id)
-
-extern struct kobject *sgi_uv_kobj;	/* /sys/firmware/sgi_uv */
-
-#endif /* ASM_X86__UV__BIOS_H */
diff --git a/include/asm-x86/uv/uv_bau.h b/include/asm-x86/uv/uv_bau.h
deleted file mode 100644
index 77153fb..0000000
--- a/include/asm-x86/uv/uv_bau.h
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * SGI UV Broadcast Assist Unit definitions
- *
- * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef ASM_X86__UV__UV_BAU_H
-#define ASM_X86__UV__UV_BAU_H
-
-#include <linux/bitmap.h>
-#define BITSPERBYTE 8
-
-/*
- * Broadcast Assist Unit messaging structures
- *
- * Selective Broadcast activations are induced by software action
- * specifying a particular 8-descriptor "set" via a 6-bit index written
- * to an MMR.
- * Thus there are 64 unique 512-byte sets of SB descriptors - one set for
- * each 6-bit index value. These descriptor sets are mapped in sequence
- * starting with set 0 located at the address specified in the
- * BAU_SB_DESCRIPTOR_BASE register, set 1 is located at BASE + 512,
- * set 2 is at BASE + 2*512, set 3 at BASE + 3*512, and so on.
- *
- * We will use 31 sets, one for sending BAU messages from each of the 32
- * cpu's on the node.
- *
- * TLB shootdown will use the first of the 8 descriptors of each set.
- * Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set).
- */
-
-#define UV_ITEMS_PER_DESCRIPTOR		8
-#define UV_CPUS_PER_ACT_STATUS		32
-#define UV_ACT_STATUS_MASK		0x3
-#define UV_ACT_STATUS_SIZE		2
-#define UV_ACTIVATION_DESCRIPTOR_SIZE	32
-#define UV_DISTRIBUTION_SIZE		256
-#define UV_SW_ACK_NPENDING		8
-#define UV_NET_ENDPOINT_INTD		0x38
-#define UV_DESC_BASE_PNODE_SHIFT	49
-#define UV_PAYLOADQ_PNODE_SHIFT		49
-#define UV_PTC_BASENAME			"sgi_uv/ptc_statistics"
-#define uv_physnodeaddr(x)		((__pa((unsigned long)(x)) & uv_mmask))
-
-/*
- * bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1
- */
-#define DESC_STATUS_IDLE		0
-#define DESC_STATUS_ACTIVE		1
-#define DESC_STATUS_DESTINATION_TIMEOUT	2
-#define DESC_STATUS_SOURCE_TIMEOUT	3
-
-/*
- * source side threshholds at which message retries print a warning
- */
-#define SOURCE_TIMEOUT_LIMIT		20
-#define DESTINATION_TIMEOUT_LIMIT	20
-
-/*
- * number of entries in the destination side payload queue
- */
-#define DEST_Q_SIZE			17
-/*
- * number of destination side software ack resources
- */
-#define DEST_NUM_RESOURCES		8
-#define MAX_CPUS_PER_NODE		32
-/*
- * completion statuses for sending a TLB flush message
- */
-#define	FLUSH_RETRY			1
-#define	FLUSH_GIVEUP			2
-#define	FLUSH_COMPLETE			3
-
-/*
- * Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor)
- * If the 'multilevel' flag in the header portion of the descriptor
- * has been set to 0, then endpoint multi-unicast mode is selected.
- * The distribution specification (32 bytes) is interpreted as a 256-bit
- * distribution vector. Adjacent bits correspond to consecutive even numbered
- * nodeIDs. The result of adding the index of a given bit to the 15-bit
- * 'base_dest_nodeid' field of the header corresponds to the
- * destination nodeID associated with that specified bit.
- */
-struct bau_target_nodemask {
-	unsigned long bits[BITS_TO_LONGS(256)];
-};
-
-/*
- * mask of cpu's on a node
- * (during initialization we need to check that unsigned long has
- *  enough bits for max. cpu's per node)
- */
-struct bau_local_cpumask {
-	unsigned long bits;
-};
-
-/*
- * Payload: 16 bytes (128 bits) (bytes 0x20-0x2f of descriptor)
- * only 12 bytes (96 bits) of the payload area are usable.
- * An additional 3 bytes (bits 27:4) of the header address are carried
- * to the next bytes of the destination payload queue.
- * And an additional 2 bytes of the header Suppl_A field are also
- * carried to the destination payload queue.
- * But the first byte of the Suppl_A becomes bits 127:120 (the 16th byte)
- * of the destination payload queue, which is written by the hardware
- * with the s/w ack resource bit vector.
- * [ effective message contents (16 bytes (128 bits) maximum), not counting
- *   the s/w ack bit vector  ]
- */
-
-/*
- * The payload is software-defined for INTD transactions
- */
-struct bau_msg_payload {
-	unsigned long address;		/* signifies a page or all TLB's
-						of the cpu */
-	/* 64 bits */
-	unsigned short sending_cpu;	/* filled in by sender */
-	/* 16 bits */
-	unsigned short acknowledge_count;/* filled in by destination */
-	/* 16 bits */
-	unsigned int reserved1:32;	/* not usable */
-};
-
-
-/*
- * Message header:  16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
- * see table 4.2.3.0.1 in broacast_assist spec.
- */
-struct bau_msg_header {
-	int dest_subnodeid:6;	/* must be zero */
-	/* bits 5:0 */
-	int base_dest_nodeid:15; /* nasid>>1 (pnode) of first bit in node_map */
-	/* bits 20:6 */
-	int command:8;		/* message type */
-	/* bits 28:21 */
-				/* 0x38: SN3net EndPoint Message */
-	int rsvd_1:3;		/* must be zero */
-	/* bits 31:29 */
-				/* int will align on 32 bits */
-	int rsvd_2:9;		/* must be zero */
-	/* bits 40:32 */
-				/* Suppl_A is 56-41 */
-	int payload_2a:8;	/* becomes byte 16 of msg */
-	/* bits 48:41 */	/* not currently using */
-	int payload_2b:8;	/* becomes byte 17 of msg */
-	/* bits 56:49 */	/* not currently using */
-				/* Address field (96:57) is never used as an
-				   address (these are address bits 42:3) */
-	int rsvd_3:1;		/* must be zero */
-	/* bit 57 */
-				/* address bits 27:4 are payload */
-				/* these 24 bits become bytes 12-14 of msg */
-	int replied_to:1;	/* sent as 0 by the source to byte 12 */
-	/* bit 58 */
-
-	int payload_1a:5;	/* not currently used */
-	/* bits 63:59 */
-	int payload_1b:8;	/* not currently used */
-	/* bits 71:64 */
-	int payload_1c:8;	/* not currently used */
-	/* bits 79:72 */
-	int payload_1d:2;	/* not currently used */
-	/* bits 81:80 */
-
-	int rsvd_4:7;		/* must be zero */
-	/* bits 88:82 */
-	int sw_ack_flag:1;	/* software acknowledge flag */
-	/* bit 89 */
-				/* INTD trasactions at destination are to
-				   wait for software acknowledge */
-	int rsvd_5:6;		/* must be zero */
-	/* bits 95:90 */
-	int rsvd_6:5;		/* must be zero */
-	/* bits 100:96 */
-	int int_both:1;		/* if 1, interrupt both sockets on the blade */
-	/* bit 101*/
-	int fairness:3;		/* usually zero */
-	/* bits 104:102 */
-	int multilevel:1;	/* multi-level multicast format */
-	/* bit 105 */
-				/* 0 for TLB: endpoint multi-unicast messages */
-	int chaining:1;		/* next descriptor is part of this activation*/
-	/* bit 106 */
-	int rsvd_7:21;		/* must be zero */
-	/* bits 127:107 */
-};
-
-/*
- * The activation descriptor:
- * The format of the message to send, plus all accompanying control
- * Should be 64 bytes
- */
-struct bau_desc {
-	struct bau_target_nodemask distribution;
-	/*
-	 * message template, consisting of header and payload:
-	 */
-	struct bau_msg_header header;
-	struct bau_msg_payload payload;
-};
-/*
- *   -payload--    ---------header------
- *   bytes 0-11    bits 41-56  bits 58-81
- *       A           B  (2)      C (3)
- *
- *            A/B/C are moved to:
- *       A            C          B
- *   bytes 0-11  bytes 12-14  bytes 16-17  (byte 15 filled in by hw as vector)
- *   ------------payload queue-----------
- */
-
-/*
- * The payload queue on the destination side is an array of these.
- * With BAU_MISC_CONTROL set for software acknowledge mode, the messages
- * are 32 bytes (2 micropackets) (256 bits) in length, but contain only 17
- * bytes of usable data, including the sw ack vector in byte 15 (bits 127:120)
- * (12 bytes come from bau_msg_payload, 3 from payload_1, 2 from
- *  sw_ack_vector and payload_2)
- * "Enabling Software Acknowledgment mode (see Section 4.3.3 Software
- *  Acknowledge Processing) also selects 32 byte (17 bytes usable) payload
- *  operation."
- */
-struct bau_payload_queue_entry {
-	unsigned long address;		/* signifies a page or all TLB's
-						of the cpu */
-	/* 64 bits, bytes 0-7 */
-
-	unsigned short sending_cpu;	/* cpu that sent the message */
-	/* 16 bits, bytes 8-9 */
-
-	unsigned short acknowledge_count; /* filled in by destination */
-	/* 16 bits, bytes 10-11 */
-
-	unsigned short replied_to:1;	/* sent as 0 by the source */
-	/* 1 bit */
-	unsigned short unused1:7;       /* not currently using */
-	/* 7 bits: byte 12) */
-
-	unsigned char unused2[2];	/* not currently using */
-	/* bytes 13-14 */
-
-	unsigned char sw_ack_vector;	/* filled in by the hardware */
-	/* byte 15 (bits 127:120) */
-
-	unsigned char unused4[3];	/* not currently using bytes 17-19 */
-	/* bytes 17-19 */
-
-	int number_of_cpus;		/* filled in at destination */
-	/* 32 bits, bytes 20-23 (aligned) */
-
-	unsigned char unused5[8];       /* not using */
-	/* bytes 24-31 */
-};
-
-/*
- * one for every slot in the destination payload queue
- */
-struct bau_msg_status {
-	struct bau_local_cpumask seen_by;	/* map of cpu's */
-};
-
-/*
- * one for every slot in the destination software ack resources
- */
-struct bau_sw_ack_status {
-	struct bau_payload_queue_entry *msg;	/* associated message */
-	int watcher;				/* cpu monitoring, or -1 */
-};
-
-/*
- * one on every node and per-cpu; to locate the software tables
- */
-struct bau_control {
-	struct bau_desc *descriptor_base;
-	struct bau_payload_queue_entry *bau_msg_head;
-	struct bau_payload_queue_entry *va_queue_first;
-	struct bau_payload_queue_entry *va_queue_last;
-	struct bau_msg_status *msg_statuses;
-	int *watching; /* pointer to array */
-};
-
-/*
- * This structure is allocated per_cpu for UV TLB shootdown statistics.
- */
-struct ptc_stats {
-	unsigned long ptc_i;	/* number of IPI-style flushes */
-	unsigned long requestor;	/* number of nodes this cpu sent to */
-	unsigned long requestee;	/* times cpu was remotely requested */
-	unsigned long alltlb;	/* times all tlb's on this cpu were flushed */
-	unsigned long onetlb;	/* times just one tlb on this cpu was flushed */
-	unsigned long s_retry;	/* retries on source side timeouts */
-	unsigned long d_retry;	/* retries on destination side timeouts */
-	unsigned long sflush;	/* cycles spent in uv_flush_tlb_others */
-	unsigned long dflush;	/* cycles spent on destination side */
-	unsigned long retriesok; /* successes on retries */
-	unsigned long nomsg;	/* interrupts with no message */
-	unsigned long multmsg;	/* interrupts with multiple messages */
-	unsigned long ntargeted;/* nodes targeted */
-};
-
-static inline int bau_node_isset(int node, struct bau_target_nodemask *dstp)
-{
-	return constant_test_bit(node, &dstp->bits[0]);
-}
-static inline void bau_node_set(int node, struct bau_target_nodemask *dstp)
-{
-	__set_bit(node, &dstp->bits[0]);
-}
-static inline void bau_nodes_clear(struct bau_target_nodemask *dstp, int nbits)
-{
-	bitmap_zero(&dstp->bits[0], nbits);
-}
-
-static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits)
-{
-	bitmap_zero(&dstp->bits, nbits);
-}
-
-#define cpubit_isset(cpu, bau_local_cpumask) \
-	test_bit((cpu), (bau_local_cpumask).bits)
-
-extern int uv_flush_tlb_others(cpumask_t *, struct mm_struct *, unsigned long);
-extern void uv_bau_message_intr1(void);
-extern void uv_bau_timeout_intr1(void);
-
-#endif /* ASM_X86__UV__UV_BAU_H */
diff --git a/include/asm-x86/uv/uv_hub.h b/include/asm-x86/uv/uv_hub.h
deleted file mode 100644
index bdb5b01..0000000
--- a/include/asm-x86/uv/uv_hub.h
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * SGI UV architectural definitions
- *
- * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef ASM_X86__UV__UV_HUB_H
-#define ASM_X86__UV__UV_HUB_H
-
-#include <linux/numa.h>
-#include <linux/percpu.h>
-#include <asm/types.h>
-#include <asm/percpu.h>
-
-
-/*
- * Addressing Terminology
- *
- *	M       - The low M bits of a physical address represent the offset
- *		  into the blade local memory. RAM memory on a blade is physically
- *		  contiguous (although various IO spaces may punch holes in
- *		  it)..
- *
- * 	N	- Number of bits in the node portion of a socket physical
- * 		  address.
- *
- * 	NASID   - network ID of a router, Mbrick or Cbrick. Nasid values of
- * 	 	  routers always have low bit of 1, C/MBricks have low bit
- * 		  equal to 0. Most addressing macros that target UV hub chips
- * 		  right shift the NASID by 1 to exclude the always-zero bit.
- * 		  NASIDs contain up to 15 bits.
- *
- *	GNODE   - NASID right shifted by 1 bit. Most mmrs contain gnodes instead
- *		  of nasids.
- *
- * 	PNODE   - the low N bits of the GNODE. The PNODE is the most useful variant
- * 		  of the nasid for socket usage.
- *
- *
- *  NumaLink Global Physical Address Format:
- *  +--------------------------------+---------------------+
- *  |00..000|      GNODE             |      NodeOffset     |
- *  +--------------------------------+---------------------+
- *          |<-------53 - M bits --->|<--------M bits ----->
- *
- *	M - number of node offset bits (35 .. 40)
- *
- *
- *  Memory/UV-HUB Processor Socket Address Format:
- *  +----------------+---------------+---------------------+
- *  |00..000000000000|   PNODE       |      NodeOffset     |
- *  +----------------+---------------+---------------------+
- *                   <--- N bits --->|<--------M bits ----->
- *
- *	M - number of node offset bits (35 .. 40)
- *	N - number of PNODE bits (0 .. 10)
- *
- *		Note: M + N cannot currently exceed 44 (x86_64) or 46 (IA64).
- *		The actual values are configuration dependent and are set at
- *		boot time. M & N values are set by the hardware/BIOS at boot.
- *
- *
- * APICID format
- * 	NOTE!!!!!! This is the current format of the APICID. However, code
- * 	should assume that this will change in the future. Use functions
- * 	in this file for all APICID bit manipulations and conversion.
- *
- * 		1111110000000000
- * 		5432109876543210
- *		pppppppppplc0cch
- *		sssssssssss
- *
- *			p  = pnode bits
- *			l =  socket number on board
- *			c  = core
- *			h  = hyperthread
- *			s  = bits that are in the SOCKET_ID CSR
- *
- *	Note: Processor only supports 12 bits in the APICID register. The ACPI
- *	      tables hold all 16 bits. Software needs to be aware of this.
- *
- * 	      Unless otherwise specified, all references to APICID refer to
- * 	      the FULL value contained in ACPI tables, not the subset in the
- * 	      processor APICID register.
- */
-
-
-/*
- * Maximum number of bricks in all partitions and in all coherency domains.
- * This is the total number of bricks accessible in the numalink fabric. It
- * includes all C & M bricks. Routers are NOT included.
- *
- * This value is also the value of the maximum number of non-router NASIDs
- * in the numalink fabric.
- *
- * NOTE: a brick may contain 1 or 2 OS nodes. Don't get these confused.
- */
-#define UV_MAX_NUMALINK_BLADES	16384
-
-/*
- * Maximum number of C/Mbricks within a software SSI (hardware may support
- * more).
- */
-#define UV_MAX_SSI_BLADES	256
-
-/*
- * The largest possible NASID of a C or M brick (+ 2)
- */
-#define UV_MAX_NASID_VALUE	(UV_MAX_NUMALINK_NODES * 2)
-
-/*
- * The following defines attributes of the HUB chip. These attributes are
- * frequently referenced and are kept in the per-cpu data areas of each cpu.
- * They are kept together in a struct to minimize cache misses.
- */
-struct uv_hub_info_s {
-	unsigned long	global_mmr_base;
-	unsigned long	gpa_mask;
-	unsigned long	gnode_upper;
-	unsigned long	lowmem_remap_top;
-	unsigned long	lowmem_remap_base;
-	unsigned short	pnode;
-	unsigned short	pnode_mask;
-	unsigned short	coherency_domain_number;
-	unsigned short	numa_blade_id;
-	unsigned char	blade_processor_id;
-	unsigned char	m_val;
-	unsigned char	n_val;
-};
-DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
-#define uv_hub_info 		(&__get_cpu_var(__uv_hub_info))
-#define uv_cpu_hub_info(cpu)	(&per_cpu(__uv_hub_info, cpu))
-
-/*
- * Local & Global MMR space macros.
- * 	Note: macros are intended to be used ONLY by inline functions
- * 	in this file - not by other kernel code.
- * 		n -  NASID (full 15-bit global nasid)
- * 		g -  GNODE (full 15-bit global nasid, right shifted 1)
- * 		p -  PNODE (local part of nsids, right shifted 1)
- */
-#define UV_NASID_TO_PNODE(n)		(((n) >> 1) & uv_hub_info->pnode_mask)
-#define UV_PNODE_TO_NASID(p)		(((p) << 1) | uv_hub_info->gnode_upper)
-
-#define UV_LOCAL_MMR_BASE		0xf4000000UL
-#define UV_GLOBAL_MMR32_BASE		0xf8000000UL
-#define UV_GLOBAL_MMR64_BASE		(uv_hub_info->global_mmr_base)
-#define UV_LOCAL_MMR_SIZE		(64UL * 1024 * 1024)
-#define UV_GLOBAL_MMR32_SIZE		(64UL * 1024 * 1024)
-
-#define UV_GLOBAL_MMR32_PNODE_SHIFT	15
-#define UV_GLOBAL_MMR64_PNODE_SHIFT	26
-
-#define UV_GLOBAL_MMR32_PNODE_BITS(p)	((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT))
-
-#define UV_GLOBAL_MMR64_PNODE_BITS(p)					\
-	((unsigned long)(p) << UV_GLOBAL_MMR64_PNODE_SHIFT)
-
-#define UV_APIC_PNODE_SHIFT	6
-
-/*
- * Macros for converting between kernel virtual addresses, socket local physical
- * addresses, and UV global physical addresses.
- * 	Note: use the standard __pa() & __va() macros for converting
- * 	      between socket virtual and socket physical addresses.
- */
-
-/* socket phys RAM --> UV global physical address */
-static inline unsigned long uv_soc_phys_ram_to_gpa(unsigned long paddr)
-{
-	if (paddr < uv_hub_info->lowmem_remap_top)
-		paddr += uv_hub_info->lowmem_remap_base;
-	return paddr | uv_hub_info->gnode_upper;
-}
-
-
-/* socket virtual --> UV global physical address */
-static inline unsigned long uv_gpa(void *v)
-{
-	return __pa(v) | uv_hub_info->gnode_upper;
-}
-
-/* socket virtual --> UV global physical address */
-static inline void *uv_vgpa(void *v)
-{
-	return (void *)uv_gpa(v);
-}
-
-/* UV global physical address --> socket virtual */
-static inline void *uv_va(unsigned long gpa)
-{
-	return __va(gpa & uv_hub_info->gpa_mask);
-}
-
-/* pnode, offset --> socket virtual */
-static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset)
-{
-	return __va(((unsigned long)pnode << uv_hub_info->m_val) | offset);
-}
-
-
-/*
- * Extract a PNODE from an APICID (full apicid, not processor subset)
- */
-static inline int uv_apicid_to_pnode(int apicid)
-{
-	return (apicid >> UV_APIC_PNODE_SHIFT);
-}
-
-/*
- * Access global MMRs using the low memory MMR32 space. This region supports
- * faster MMR access but not all MMRs are accessible in this space.
- */
-static inline unsigned long *uv_global_mmr32_address(int pnode,
-				unsigned long offset)
-{
-	return __va(UV_GLOBAL_MMR32_BASE |
-		       UV_GLOBAL_MMR32_PNODE_BITS(pnode) | offset);
-}
-
-static inline void uv_write_global_mmr32(int pnode, unsigned long offset,
-				 unsigned long val)
-{
-	*uv_global_mmr32_address(pnode, offset) = val;
-}
-
-static inline unsigned long uv_read_global_mmr32(int pnode,
-						 unsigned long offset)
-{
-	return *uv_global_mmr32_address(pnode, offset);
-}
-
-/*
- * Access Global MMR space using the MMR space located at the top of physical
- * memory.
- */
-static inline unsigned long *uv_global_mmr64_address(int pnode,
-				unsigned long offset)
-{
-	return __va(UV_GLOBAL_MMR64_BASE |
-		    UV_GLOBAL_MMR64_PNODE_BITS(pnode) | offset);
-}
-
-static inline void uv_write_global_mmr64(int pnode, unsigned long offset,
-				unsigned long val)
-{
-	*uv_global_mmr64_address(pnode, offset) = val;
-}
-
-static inline unsigned long uv_read_global_mmr64(int pnode,
-						 unsigned long offset)
-{
-	return *uv_global_mmr64_address(pnode, offset);
-}
-
-/*
- * Access hub local MMRs. Faster than using global space but only local MMRs
- * are accessible.
- */
-static inline unsigned long *uv_local_mmr_address(unsigned long offset)
-{
-	return __va(UV_LOCAL_MMR_BASE | offset);
-}
-
-static inline unsigned long uv_read_local_mmr(unsigned long offset)
-{
-	return *uv_local_mmr_address(offset);
-}
-
-static inline void uv_write_local_mmr(unsigned long offset, unsigned long val)
-{
-	*uv_local_mmr_address(offset) = val;
-}
-
-/*
- * Structures and definitions for converting between cpu, node, pnode, and blade
- * numbers.
- */
-struct uv_blade_info {
-	unsigned short	nr_possible_cpus;
-	unsigned short	nr_online_cpus;
-	unsigned short	pnode;
-};
-extern struct uv_blade_info *uv_blade_info;
-extern short *uv_node_to_blade;
-extern short *uv_cpu_to_blade;
-extern short uv_possible_blades;
-
-/* Blade-local cpu number of current cpu. Numbered 0 .. <# cpus on the blade> */
-static inline int uv_blade_processor_id(void)
-{
-	return uv_hub_info->blade_processor_id;
-}
-
-/* Blade number of current cpu. Numnbered 0 .. <#blades -1> */
-static inline int uv_numa_blade_id(void)
-{
-	return uv_hub_info->numa_blade_id;
-}
-
-/* Convert a cpu number to the the UV blade number */
-static inline int uv_cpu_to_blade_id(int cpu)
-{
-	return uv_cpu_to_blade[cpu];
-}
-
-/* Convert linux node number to the UV blade number */
-static inline int uv_node_to_blade_id(int nid)
-{
-	return uv_node_to_blade[nid];
-}
-
-/* Convert a blade id to the PNODE of the blade */
-static inline int uv_blade_to_pnode(int bid)
-{
-	return uv_blade_info[bid].pnode;
-}
-
-/* Determine the number of possible cpus on a blade */
-static inline int uv_blade_nr_possible_cpus(int bid)
-{
-	return uv_blade_info[bid].nr_possible_cpus;
-}
-
-/* Determine the number of online cpus on a blade */
-static inline int uv_blade_nr_online_cpus(int bid)
-{
-	return uv_blade_info[bid].nr_online_cpus;
-}
-
-/* Convert a cpu id to the PNODE of the blade containing the cpu */
-static inline int uv_cpu_to_pnode(int cpu)
-{
-	return uv_blade_info[uv_cpu_to_blade_id(cpu)].pnode;
-}
-
-/* Convert a linux node number to the PNODE of the blade */
-static inline int uv_node_to_pnode(int nid)
-{
-	return uv_blade_info[uv_node_to_blade_id(nid)].pnode;
-}
-
-/* Maximum possible number of blades */
-static inline int uv_num_possible_blades(void)
-{
-	return uv_possible_blades;
-}
-
-#endif /* ASM_X86__UV__UV_HUB_H */
-
diff --git a/include/asm-x86/uv/uv_irq.h b/include/asm-x86/uv/uv_irq.h
deleted file mode 100644
index 8bf5f32..0000000
--- a/include/asm-x86/uv/uv_irq.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * SGI UV IRQ definitions
- *
- * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef ASM_X86__UV__UV_IRQ_H
-#define ASM_X86__UV__UV_IRQ_H
-
-/* If a generic version of this structure gets defined, eliminate this one. */
-struct uv_IO_APIC_route_entry {
-	__u64	vector		:  8,
-		delivery_mode	:  3,
-		dest_mode	:  1,
-		delivery_status	:  1,
-		polarity	:  1,
-		__reserved_1	:  1,
-		trigger		:  1,
-		mask		:  1,
-		__reserved_2	: 15,
-		dest		: 32;
-};
-
-extern struct irq_chip uv_irq_chip;
-
-extern int arch_enable_uv_irq(char *, unsigned int, int, int, unsigned long);
-extern void arch_disable_uv_irq(int, unsigned long);
-
-extern int uv_setup_irq(char *, int, int, unsigned long);
-extern void uv_teardown_irq(unsigned int, int, unsigned long);
-
-#endif /* ASM_X86__UV__UV_IRQ_H */
diff --git a/include/asm-x86/uv/uv_mmrs.h b/include/asm-x86/uv/uv_mmrs.h
deleted file mode 100644
index 8b03d89..0000000
--- a/include/asm-x86/uv/uv_mmrs.h
+++ /dev/null
@@ -1,1295 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * SGI UV MMR definitions
- *
- * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef ASM_X86__UV__UV_MMRS_H
-#define ASM_X86__UV__UV_MMRS_H
-
-#define UV_MMR_ENABLE		(1UL << 63)
-
-/* ========================================================================= */
-/*                           UVH_BAU_DATA_CONFIG                             */
-/* ========================================================================= */
-#define UVH_BAU_DATA_CONFIG 0x61680UL
-#define UVH_BAU_DATA_CONFIG_32 0x0438
-
-#define UVH_BAU_DATA_CONFIG_VECTOR_SHFT 0
-#define UVH_BAU_DATA_CONFIG_VECTOR_MASK 0x00000000000000ffUL
-#define UVH_BAU_DATA_CONFIG_DM_SHFT 8
-#define UVH_BAU_DATA_CONFIG_DM_MASK 0x0000000000000700UL
-#define UVH_BAU_DATA_CONFIG_DESTMODE_SHFT 11
-#define UVH_BAU_DATA_CONFIG_DESTMODE_MASK 0x0000000000000800UL
-#define UVH_BAU_DATA_CONFIG_STATUS_SHFT 12
-#define UVH_BAU_DATA_CONFIG_STATUS_MASK 0x0000000000001000UL
-#define UVH_BAU_DATA_CONFIG_P_SHFT 13
-#define UVH_BAU_DATA_CONFIG_P_MASK 0x0000000000002000UL
-#define UVH_BAU_DATA_CONFIG_T_SHFT 15
-#define UVH_BAU_DATA_CONFIG_T_MASK 0x0000000000008000UL
-#define UVH_BAU_DATA_CONFIG_M_SHFT 16
-#define UVH_BAU_DATA_CONFIG_M_MASK 0x0000000000010000UL
-#define UVH_BAU_DATA_CONFIG_APIC_ID_SHFT 32
-#define UVH_BAU_DATA_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
-
-union uvh_bau_data_config_u {
-    unsigned long	v;
-    struct uvh_bau_data_config_s {
-	unsigned long	vector_  :  8;  /* RW */
-	unsigned long	dm       :  3;  /* RW */
-	unsigned long	destmode :  1;  /* RW */
-	unsigned long	status   :  1;  /* RO */
-	unsigned long	p        :  1;  /* RO */
-	unsigned long	rsvd_14  :  1;  /*    */
-	unsigned long	t        :  1;  /* RO */
-	unsigned long	m        :  1;  /* RW */
-	unsigned long	rsvd_17_31: 15;  /*    */
-	unsigned long	apic_id  : 32;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                           UVH_EVENT_OCCURRED0                             */
-/* ========================================================================= */
-#define UVH_EVENT_OCCURRED0 0x70000UL
-#define UVH_EVENT_OCCURRED0_32 0x005e8
-
-#define UVH_EVENT_OCCURRED0_LB_HCERR_SHFT 0
-#define UVH_EVENT_OCCURRED0_LB_HCERR_MASK 0x0000000000000001UL
-#define UVH_EVENT_OCCURRED0_GR0_HCERR_SHFT 1
-#define UVH_EVENT_OCCURRED0_GR0_HCERR_MASK 0x0000000000000002UL
-#define UVH_EVENT_OCCURRED0_GR1_HCERR_SHFT 2
-#define UVH_EVENT_OCCURRED0_GR1_HCERR_MASK 0x0000000000000004UL
-#define UVH_EVENT_OCCURRED0_LH_HCERR_SHFT 3
-#define UVH_EVENT_OCCURRED0_LH_HCERR_MASK 0x0000000000000008UL
-#define UVH_EVENT_OCCURRED0_RH_HCERR_SHFT 4
-#define UVH_EVENT_OCCURRED0_RH_HCERR_MASK 0x0000000000000010UL
-#define UVH_EVENT_OCCURRED0_XN_HCERR_SHFT 5
-#define UVH_EVENT_OCCURRED0_XN_HCERR_MASK 0x0000000000000020UL
-#define UVH_EVENT_OCCURRED0_SI_HCERR_SHFT 6
-#define UVH_EVENT_OCCURRED0_SI_HCERR_MASK 0x0000000000000040UL
-#define UVH_EVENT_OCCURRED0_LB_AOERR0_SHFT 7
-#define UVH_EVENT_OCCURRED0_LB_AOERR0_MASK 0x0000000000000080UL
-#define UVH_EVENT_OCCURRED0_GR0_AOERR0_SHFT 8
-#define UVH_EVENT_OCCURRED0_GR0_AOERR0_MASK 0x0000000000000100UL
-#define UVH_EVENT_OCCURRED0_GR1_AOERR0_SHFT 9
-#define UVH_EVENT_OCCURRED0_GR1_AOERR0_MASK 0x0000000000000200UL
-#define UVH_EVENT_OCCURRED0_LH_AOERR0_SHFT 10
-#define UVH_EVENT_OCCURRED0_LH_AOERR0_MASK 0x0000000000000400UL
-#define UVH_EVENT_OCCURRED0_RH_AOERR0_SHFT 11
-#define UVH_EVENT_OCCURRED0_RH_AOERR0_MASK 0x0000000000000800UL
-#define UVH_EVENT_OCCURRED0_XN_AOERR0_SHFT 12
-#define UVH_EVENT_OCCURRED0_XN_AOERR0_MASK 0x0000000000001000UL
-#define UVH_EVENT_OCCURRED0_SI_AOERR0_SHFT 13
-#define UVH_EVENT_OCCURRED0_SI_AOERR0_MASK 0x0000000000002000UL
-#define UVH_EVENT_OCCURRED0_LB_AOERR1_SHFT 14
-#define UVH_EVENT_OCCURRED0_LB_AOERR1_MASK 0x0000000000004000UL
-#define UVH_EVENT_OCCURRED0_GR0_AOERR1_SHFT 15
-#define UVH_EVENT_OCCURRED0_GR0_AOERR1_MASK 0x0000000000008000UL
-#define UVH_EVENT_OCCURRED0_GR1_AOERR1_SHFT 16
-#define UVH_EVENT_OCCURRED0_GR1_AOERR1_MASK 0x0000000000010000UL
-#define UVH_EVENT_OCCURRED0_LH_AOERR1_SHFT 17
-#define UVH_EVENT_OCCURRED0_LH_AOERR1_MASK 0x0000000000020000UL
-#define UVH_EVENT_OCCURRED0_RH_AOERR1_SHFT 18
-#define UVH_EVENT_OCCURRED0_RH_AOERR1_MASK 0x0000000000040000UL
-#define UVH_EVENT_OCCURRED0_XN_AOERR1_SHFT 19
-#define UVH_EVENT_OCCURRED0_XN_AOERR1_MASK 0x0000000000080000UL
-#define UVH_EVENT_OCCURRED0_SI_AOERR1_SHFT 20
-#define UVH_EVENT_OCCURRED0_SI_AOERR1_MASK 0x0000000000100000UL
-#define UVH_EVENT_OCCURRED0_RH_VPI_INT_SHFT 21
-#define UVH_EVENT_OCCURRED0_RH_VPI_INT_MASK 0x0000000000200000UL
-#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_SHFT 22
-#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_SHFT 23
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_MASK 0x0000000000800000UL
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_SHFT 24
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_MASK 0x0000000001000000UL
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_SHFT 25
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_MASK 0x0000000002000000UL
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_SHFT 26
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_MASK 0x0000000004000000UL
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_SHFT 27
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_MASK 0x0000000008000000UL
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_SHFT 28
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_MASK 0x0000000010000000UL
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_SHFT 29
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_MASK 0x0000000020000000UL
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_SHFT 30
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_MASK 0x0000000040000000UL
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_SHFT 31
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_MASK 0x0000000080000000UL
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_SHFT 32
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_MASK 0x0000000100000000UL
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_SHFT 33
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_MASK 0x0000000200000000UL
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_SHFT 34
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_MASK 0x0000000400000000UL
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_SHFT 35
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_MASK 0x0000000800000000UL
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_SHFT 36
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_MASK 0x0000001000000000UL
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_SHFT 37
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_MASK 0x0000002000000000UL
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_SHFT 38
-#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_MASK 0x0000004000000000UL
-#define UVH_EVENT_OCCURRED0_L1_NMI_INT_SHFT 39
-#define UVH_EVENT_OCCURRED0_L1_NMI_INT_MASK 0x0000008000000000UL
-#define UVH_EVENT_OCCURRED0_STOP_CLOCK_SHFT 40
-#define UVH_EVENT_OCCURRED0_STOP_CLOCK_MASK 0x0000010000000000UL
-#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_SHFT 41
-#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_MASK 0x0000020000000000UL
-#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_SHFT 42
-#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_MASK 0x0000040000000000UL
-#define UVH_EVENT_OCCURRED0_LTC_INT_SHFT 43
-#define UVH_EVENT_OCCURRED0_LTC_INT_MASK 0x0000080000000000UL
-#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_SHFT 44
-#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL
-#define UVH_EVENT_OCCURRED0_IPI_INT_SHFT 45
-#define UVH_EVENT_OCCURRED0_IPI_INT_MASK 0x0000200000000000UL
-#define UVH_EVENT_OCCURRED0_EXTIO_INT0_SHFT 46
-#define UVH_EVENT_OCCURRED0_EXTIO_INT0_MASK 0x0000400000000000UL
-#define UVH_EVENT_OCCURRED0_EXTIO_INT1_SHFT 47
-#define UVH_EVENT_OCCURRED0_EXTIO_INT1_MASK 0x0000800000000000UL
-#define UVH_EVENT_OCCURRED0_EXTIO_INT2_SHFT 48
-#define UVH_EVENT_OCCURRED0_EXTIO_INT2_MASK 0x0001000000000000UL
-#define UVH_EVENT_OCCURRED0_EXTIO_INT3_SHFT 49
-#define UVH_EVENT_OCCURRED0_EXTIO_INT3_MASK 0x0002000000000000UL
-#define UVH_EVENT_OCCURRED0_PROFILE_INT_SHFT 50
-#define UVH_EVENT_OCCURRED0_PROFILE_INT_MASK 0x0004000000000000UL
-#define UVH_EVENT_OCCURRED0_RTC0_SHFT 51
-#define UVH_EVENT_OCCURRED0_RTC0_MASK 0x0008000000000000UL
-#define UVH_EVENT_OCCURRED0_RTC1_SHFT 52
-#define UVH_EVENT_OCCURRED0_RTC1_MASK 0x0010000000000000UL
-#define UVH_EVENT_OCCURRED0_RTC2_SHFT 53
-#define UVH_EVENT_OCCURRED0_RTC2_MASK 0x0020000000000000UL
-#define UVH_EVENT_OCCURRED0_RTC3_SHFT 54
-#define UVH_EVENT_OCCURRED0_RTC3_MASK 0x0040000000000000UL
-#define UVH_EVENT_OCCURRED0_BAU_DATA_SHFT 55
-#define UVH_EVENT_OCCURRED0_BAU_DATA_MASK 0x0080000000000000UL
-#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_SHFT 56
-#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_MASK 0x0100000000000000UL
-union uvh_event_occurred0_u {
-    unsigned long	v;
-    struct uvh_event_occurred0_s {
-	unsigned long	lb_hcerr             :  1;  /* RW, W1C */
-	unsigned long	gr0_hcerr            :  1;  /* RW, W1C */
-	unsigned long	gr1_hcerr            :  1;  /* RW, W1C */
-	unsigned long	lh_hcerr             :  1;  /* RW, W1C */
-	unsigned long	rh_hcerr             :  1;  /* RW, W1C */
-	unsigned long	xn_hcerr             :  1;  /* RW, W1C */
-	unsigned long	si_hcerr             :  1;  /* RW, W1C */
-	unsigned long	lb_aoerr0            :  1;  /* RW, W1C */
-	unsigned long	gr0_aoerr0           :  1;  /* RW, W1C */
-	unsigned long	gr1_aoerr0           :  1;  /* RW, W1C */
-	unsigned long	lh_aoerr0            :  1;  /* RW, W1C */
-	unsigned long	rh_aoerr0            :  1;  /* RW, W1C */
-	unsigned long	xn_aoerr0            :  1;  /* RW, W1C */
-	unsigned long	si_aoerr0            :  1;  /* RW, W1C */
-	unsigned long	lb_aoerr1            :  1;  /* RW, W1C */
-	unsigned long	gr0_aoerr1           :  1;  /* RW, W1C */
-	unsigned long	gr1_aoerr1           :  1;  /* RW, W1C */
-	unsigned long	lh_aoerr1            :  1;  /* RW, W1C */
-	unsigned long	rh_aoerr1            :  1;  /* RW, W1C */
-	unsigned long	xn_aoerr1            :  1;  /* RW, W1C */
-	unsigned long	si_aoerr1            :  1;  /* RW, W1C */
-	unsigned long	rh_vpi_int           :  1;  /* RW, W1C */
-	unsigned long	system_shutdown_int  :  1;  /* RW, W1C */
-	unsigned long	lb_irq_int_0         :  1;  /* RW, W1C */
-	unsigned long	lb_irq_int_1         :  1;  /* RW, W1C */
-	unsigned long	lb_irq_int_2         :  1;  /* RW, W1C */
-	unsigned long	lb_irq_int_3         :  1;  /* RW, W1C */
-	unsigned long	lb_irq_int_4         :  1;  /* RW, W1C */
-	unsigned long	lb_irq_int_5         :  1;  /* RW, W1C */
-	unsigned long	lb_irq_int_6         :  1;  /* RW, W1C */
-	unsigned long	lb_irq_int_7         :  1;  /* RW, W1C */
-	unsigned long	lb_irq_int_8         :  1;  /* RW, W1C */
-	unsigned long	lb_irq_int_9         :  1;  /* RW, W1C */
-	unsigned long	lb_irq_int_10        :  1;  /* RW, W1C */
-	unsigned long	lb_irq_int_11        :  1;  /* RW, W1C */
-	unsigned long	lb_irq_int_12        :  1;  /* RW, W1C */
-	unsigned long	lb_irq_int_13        :  1;  /* RW, W1C */
-	unsigned long	lb_irq_int_14        :  1;  /* RW, W1C */
-	unsigned long	lb_irq_int_15        :  1;  /* RW, W1C */
-	unsigned long	l1_nmi_int           :  1;  /* RW, W1C */
-	unsigned long	stop_clock           :  1;  /* RW, W1C */
-	unsigned long	asic_to_l1           :  1;  /* RW, W1C */
-	unsigned long	l1_to_asic           :  1;  /* RW, W1C */
-	unsigned long	ltc_int              :  1;  /* RW, W1C */
-	unsigned long	la_seq_trigger       :  1;  /* RW, W1C */
-	unsigned long	ipi_int              :  1;  /* RW, W1C */
-	unsigned long	extio_int0           :  1;  /* RW, W1C */
-	unsigned long	extio_int1           :  1;  /* RW, W1C */
-	unsigned long	extio_int2           :  1;  /* RW, W1C */
-	unsigned long	extio_int3           :  1;  /* RW, W1C */
-	unsigned long	profile_int          :  1;  /* RW, W1C */
-	unsigned long	rtc0                 :  1;  /* RW, W1C */
-	unsigned long	rtc1                 :  1;  /* RW, W1C */
-	unsigned long	rtc2                 :  1;  /* RW, W1C */
-	unsigned long	rtc3                 :  1;  /* RW, W1C */
-	unsigned long	bau_data             :  1;  /* RW, W1C */
-	unsigned long	power_management_req :  1;  /* RW, W1C */
-	unsigned long	rsvd_57_63           :  7;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                        UVH_EVENT_OCCURRED0_ALIAS                          */
-/* ========================================================================= */
-#define UVH_EVENT_OCCURRED0_ALIAS 0x0000000000070008UL
-#define UVH_EVENT_OCCURRED0_ALIAS_32 0x005f0
-
-/* ========================================================================= */
-/*                               UVH_INT_CMPB                                */
-/* ========================================================================= */
-#define UVH_INT_CMPB 0x22080UL
-
-#define UVH_INT_CMPB_REAL_TIME_CMPB_SHFT 0
-#define UVH_INT_CMPB_REAL_TIME_CMPB_MASK 0x00ffffffffffffffUL
-
-union uvh_int_cmpb_u {
-    unsigned long	v;
-    struct uvh_int_cmpb_s {
-	unsigned long	real_time_cmpb : 56;  /* RW */
-	unsigned long	rsvd_56_63     :  8;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                               UVH_INT_CMPC                                */
-/* ========================================================================= */
-#define UVH_INT_CMPC 0x22100UL
-
-#define UVH_INT_CMPC_REAL_TIME_CMPC_SHFT 0
-#define UVH_INT_CMPC_REAL_TIME_CMPC_MASK 0x00ffffffffffffffUL
-
-union uvh_int_cmpc_u {
-    unsigned long	v;
-    struct uvh_int_cmpc_s {
-	unsigned long	real_time_cmpc : 56;  /* RW */
-	unsigned long	rsvd_56_63     :  8;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                               UVH_INT_CMPD                                */
-/* ========================================================================= */
-#define UVH_INT_CMPD 0x22180UL
-
-#define UVH_INT_CMPD_REAL_TIME_CMPD_SHFT 0
-#define UVH_INT_CMPD_REAL_TIME_CMPD_MASK 0x00ffffffffffffffUL
-
-union uvh_int_cmpd_u {
-    unsigned long	v;
-    struct uvh_int_cmpd_s {
-	unsigned long	real_time_cmpd : 56;  /* RW */
-	unsigned long	rsvd_56_63     :  8;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                               UVH_IPI_INT                                 */
-/* ========================================================================= */
-#define UVH_IPI_INT 0x60500UL
-#define UVH_IPI_INT_32 0x0348
-
-#define UVH_IPI_INT_VECTOR_SHFT 0
-#define UVH_IPI_INT_VECTOR_MASK 0x00000000000000ffUL
-#define UVH_IPI_INT_DELIVERY_MODE_SHFT 8
-#define UVH_IPI_INT_DELIVERY_MODE_MASK 0x0000000000000700UL
-#define UVH_IPI_INT_DESTMODE_SHFT 11
-#define UVH_IPI_INT_DESTMODE_MASK 0x0000000000000800UL
-#define UVH_IPI_INT_APIC_ID_SHFT 16
-#define UVH_IPI_INT_APIC_ID_MASK 0x0000ffffffff0000UL
-#define UVH_IPI_INT_SEND_SHFT 63
-#define UVH_IPI_INT_SEND_MASK 0x8000000000000000UL
-
-union uvh_ipi_int_u {
-    unsigned long	v;
-    struct uvh_ipi_int_s {
-	unsigned long	vector_       :  8;  /* RW */
-	unsigned long	delivery_mode :  3;  /* RW */
-	unsigned long	destmode      :  1;  /* RW */
-	unsigned long	rsvd_12_15    :  4;  /*    */
-	unsigned long	apic_id       : 32;  /* RW */
-	unsigned long	rsvd_48_62    : 15;  /*    */
-	unsigned long	send          :  1;  /* WP */
-    } s;
-};
-
-/* ========================================================================= */
-/*                   UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST                     */
-/* ========================================================================= */
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST 0x320050UL
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_32 0x009c0
-
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_SHFT 4
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_MASK 0x000007fffffffff0UL
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_NODE_ID_SHFT 49
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_NODE_ID_MASK 0x7ffe000000000000UL
-
-union uvh_lb_bau_intd_payload_queue_first_u {
-    unsigned long	v;
-    struct uvh_lb_bau_intd_payload_queue_first_s {
-	unsigned long	rsvd_0_3:  4;  /*    */
-	unsigned long	address : 39;  /* RW */
-	unsigned long	rsvd_43_48:  6;  /*    */
-	unsigned long	node_id : 14;  /* RW */
-	unsigned long	rsvd_63 :  1;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                    UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST                     */
-/* ========================================================================= */
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST 0x320060UL
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_32 0x009c8
-
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_SHFT 4
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_MASK 0x000007fffffffff0UL
-
-union uvh_lb_bau_intd_payload_queue_last_u {
-    unsigned long	v;
-    struct uvh_lb_bau_intd_payload_queue_last_s {
-	unsigned long	rsvd_0_3:  4;  /*    */
-	unsigned long	address : 39;  /* RW */
-	unsigned long	rsvd_43_63: 21;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                    UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL                     */
-/* ========================================================================= */
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL 0x320070UL
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_32 0x009d0
-
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_SHFT 4
-#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_MASK 0x000007fffffffff0UL
-
-union uvh_lb_bau_intd_payload_queue_tail_u {
-    unsigned long	v;
-    struct uvh_lb_bau_intd_payload_queue_tail_s {
-	unsigned long	rsvd_0_3:  4;  /*    */
-	unsigned long	address : 39;  /* RW */
-	unsigned long	rsvd_43_63: 21;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                   UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE                    */
-/* ========================================================================= */
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE 0x320080UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_32 0x0a68
-
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_SHFT 0
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_MASK 0x0000000000000001UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_1_SHFT 1
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_1_MASK 0x0000000000000002UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_2_SHFT 2
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_2_MASK 0x0000000000000004UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_3_SHFT 3
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_3_MASK 0x0000000000000008UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_4_SHFT 4
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_4_MASK 0x0000000000000010UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_5_SHFT 5
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_5_MASK 0x0000000000000020UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_6_SHFT 6
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_6_MASK 0x0000000000000040UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_7_SHFT 7
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_7_MASK 0x0000000000000080UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_0_SHFT 8
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_0_MASK 0x0000000000000100UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_1_SHFT 9
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_1_MASK 0x0000000000000200UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_2_SHFT 10
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_2_MASK 0x0000000000000400UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_3_SHFT 11
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_3_MASK 0x0000000000000800UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_4_SHFT 12
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_4_MASK 0x0000000000001000UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_5_SHFT 13
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_5_MASK 0x0000000000002000UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_6_SHFT 14
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_6_MASK 0x0000000000004000UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_7_SHFT 15
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_7_MASK 0x0000000000008000UL
-union uvh_lb_bau_intd_software_acknowledge_u {
-    unsigned long	v;
-    struct uvh_lb_bau_intd_software_acknowledge_s {
-	unsigned long	pending_0 :  1;  /* RW, W1C */
-	unsigned long	pending_1 :  1;  /* RW, W1C */
-	unsigned long	pending_2 :  1;  /* RW, W1C */
-	unsigned long	pending_3 :  1;  /* RW, W1C */
-	unsigned long	pending_4 :  1;  /* RW, W1C */
-	unsigned long	pending_5 :  1;  /* RW, W1C */
-	unsigned long	pending_6 :  1;  /* RW, W1C */
-	unsigned long	pending_7 :  1;  /* RW, W1C */
-	unsigned long	timeout_0 :  1;  /* RW, W1C */
-	unsigned long	timeout_1 :  1;  /* RW, W1C */
-	unsigned long	timeout_2 :  1;  /* RW, W1C */
-	unsigned long	timeout_3 :  1;  /* RW, W1C */
-	unsigned long	timeout_4 :  1;  /* RW, W1C */
-	unsigned long	timeout_5 :  1;  /* RW, W1C */
-	unsigned long	timeout_6 :  1;  /* RW, W1C */
-	unsigned long	timeout_7 :  1;  /* RW, W1C */
-	unsigned long	rsvd_16_63: 48;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS                 */
-/* ========================================================================= */
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS 0x0000000000320088UL
-#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS_32 0x0a70
-
-/* ========================================================================= */
-/*                     UVH_LB_BAU_SB_ACTIVATION_CONTROL                      */
-/* ========================================================================= */
-#define UVH_LB_BAU_SB_ACTIVATION_CONTROL 0x320020UL
-#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_32 0x009a8
-
-#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INDEX_SHFT 0
-#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INDEX_MASK 0x000000000000003fUL
-#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT 62
-#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_MASK 0x4000000000000000UL
-#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INIT_SHFT 63
-#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INIT_MASK 0x8000000000000000UL
-
-union uvh_lb_bau_sb_activation_control_u {
-    unsigned long	v;
-    struct uvh_lb_bau_sb_activation_control_s {
-	unsigned long	index :  6;  /* RW */
-	unsigned long	rsvd_6_61: 56;  /*    */
-	unsigned long	push  :  1;  /* WP */
-	unsigned long	init  :  1;  /* WP */
-    } s;
-};
-
-/* ========================================================================= */
-/*                    UVH_LB_BAU_SB_ACTIVATION_STATUS_0                      */
-/* ========================================================================= */
-#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0 0x320030UL
-#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_32 0x009b0
-
-#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_STATUS_SHFT 0
-#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_STATUS_MASK 0xffffffffffffffffUL
-
-union uvh_lb_bau_sb_activation_status_0_u {
-    unsigned long	v;
-    struct uvh_lb_bau_sb_activation_status_0_s {
-	unsigned long	status : 64;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                    UVH_LB_BAU_SB_ACTIVATION_STATUS_1                      */
-/* ========================================================================= */
-#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1 0x320040UL
-#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_32 0x009b8
-
-#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_STATUS_SHFT 0
-#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_STATUS_MASK 0xffffffffffffffffUL
-
-union uvh_lb_bau_sb_activation_status_1_u {
-    unsigned long	v;
-    struct uvh_lb_bau_sb_activation_status_1_s {
-	unsigned long	status : 64;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                      UVH_LB_BAU_SB_DESCRIPTOR_BASE                        */
-/* ========================================================================= */
-#define UVH_LB_BAU_SB_DESCRIPTOR_BASE 0x320010UL
-#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_32 0x009a0
-
-#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_PAGE_ADDRESS_SHFT 12
-#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_PAGE_ADDRESS_MASK 0x000007fffffff000UL
-#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_SHFT 49
-#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_MASK 0x7ffe000000000000UL
-
-union uvh_lb_bau_sb_descriptor_base_u {
-    unsigned long	v;
-    struct uvh_lb_bau_sb_descriptor_base_s {
-	unsigned long	rsvd_0_11    : 12;  /*    */
-	unsigned long	page_address : 31;  /* RW */
-	unsigned long	rsvd_43_48   :  6;  /*    */
-	unsigned long	node_id      : 14;  /* RW */
-	unsigned long	rsvd_63      :  1;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                      UVH_LB_MCAST_AOERR0_RPT_ENABLE                       */
-/* ========================================================================= */
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE 0x50b20UL
-
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_OBESE_MSG_SHFT 0
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_OBESE_MSG_MASK 0x0000000000000001UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_DATA_SB_ERR_SHFT 1
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_DATA_SB_ERR_MASK 0x0000000000000002UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_NACK_BUFF_PARITY_SHFT 2
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_NACK_BUFF_PARITY_MASK 0x0000000000000004UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_TIMEOUT_SHFT 3
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_TIMEOUT_MASK 0x0000000000000008UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_INACTIVE_REPLY_SHFT 4
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_INACTIVE_REPLY_MASK 0x0000000000000010UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_UPGRADE_ERROR_SHFT 5
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_UPGRADE_ERROR_MASK 0x0000000000000020UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REG_COUNT_UNDERFLOW_SHFT 6
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REG_COUNT_UNDERFLOW_MASK 0x0000000000000040UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REP_OBESE_MSG_SHFT 7
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REP_OBESE_MSG_MASK 0x0000000000000080UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_RUNT_MSG_SHFT 8
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_RUNT_MSG_MASK 0x0000000000000100UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_OBESE_MSG_SHFT 9
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_OBESE_MSG_MASK 0x0000000000000200UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_DATA_SB_ERR_SHFT 10
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_DATA_SB_ERR_MASK 0x0000000000000400UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_RUNT_MSG_SHFT 11
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_RUNT_MSG_MASK 0x0000000000000800UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_OBESE_MSG_SHFT 12
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_OBESE_MSG_MASK 0x0000000000001000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_DATA_SB_ERR_SHFT 13
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_DATA_SB_ERR_MASK 0x0000000000002000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_COMMAND_ERR_SHFT 14
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_COMMAND_ERR_MASK 0x0000000000004000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_PEND_TIMEOUT_SHFT 15
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_PEND_TIMEOUT_MASK 0x0000000000008000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_RUNT_MSG_SHFT 16
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_RUNT_MSG_MASK 0x0000000000010000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_OBESE_MSG_SHFT 17
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_OBESE_MSG_MASK 0x0000000000020000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_DATA_SB_ERR_SHFT 18
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_DATA_SB_ERR_MASK 0x0000000000040000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_RUNT_MSG_SHFT 19
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_RUNT_MSG_MASK 0x0000000000080000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_OBESE_MSG_SHFT 20
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_OBESE_MSG_MASK 0x0000000000100000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_DATA_SB_ERR_SHFT 21
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_DATA_SB_ERR_MASK 0x0000000000200000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_AMO_TIMEOUT_SHFT 22
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_AMO_TIMEOUT_MASK 0x0000000000400000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_PUT_TIMEOUT_SHFT 23
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_PUT_TIMEOUT_MASK 0x0000000000800000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_SPURIOUS_EVENT_SHFT 24
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_SPURIOUS_EVENT_MASK 0x0000000001000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IOH_DESTINATION_TABLE_PARITY_SHFT 25
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IOH_DESTINATION_TABLE_PARITY_MASK 0x0000000002000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_HAD_ERROR_REPLY_SHFT 26
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_HAD_ERROR_REPLY_MASK 0x0000000004000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_TIMEOUT_SHFT 27
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_TIMEOUT_MASK 0x0000000008000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_LOCK_MANAGER_HAD_ERROR_REPLY_SHFT 28
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_LOCK_MANAGER_HAD_ERROR_REPLY_MASK 0x0000000010000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_HAD_ERROR_REPLY_SHFT 29
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_HAD_ERROR_REPLY_MASK 0x0000000020000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_TIMEOUT_SHFT 30
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_TIMEOUT_MASK 0x0000000040000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SB_ACTIVATION_OVERRUN_SHFT 31
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SB_ACTIVATION_OVERRUN_MASK 0x0000000080000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_HAD_ERROR_REPLY_SHFT 32
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_HAD_ERROR_REPLY_MASK 0x0000000100000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_TIMEOUT_SHFT 33
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_TIMEOUT_MASK 0x0000000200000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_0_PARITY_SHFT 34
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_0_PARITY_MASK 0x0000000400000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_1_PARITY_SHFT 35
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_1_PARITY_MASK 0x0000000800000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SOCKET_DESTINATION_TABLE_PARITY_SHFT 36
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SOCKET_DESTINATION_TABLE_PARITY_MASK 0x0000001000000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_BAU_REPLY_PAYLOAD_CORRUPTION_SHFT 37
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_BAU_REPLY_PAYLOAD_CORRUPTION_MASK 0x0000002000000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IO_PORT_DESTINATION_TABLE_PARITY_SHFT 38
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IO_PORT_DESTINATION_TABLE_PARITY_MASK 0x0000004000000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INTD_SOFT_ACK_TIMEOUT_SHFT 39
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INTD_SOFT_ACK_TIMEOUT_MASK 0x0000008000000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_OBESE_MSG_SHFT 40
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_OBESE_MSG_MASK 0x0000010000000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_COMMAND_ERR_SHFT 41
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_COMMAND_ERR_MASK 0x0000020000000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_TIMEOUT_SHFT 42
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_TIMEOUT_MASK 0x0000040000000000UL
-
-union uvh_lb_mcast_aoerr0_rpt_enable_u {
-    unsigned long	v;
-    struct uvh_lb_mcast_aoerr0_rpt_enable_s {
-	unsigned long	mcast_obese_msg                         :  1;  /* RW */
-	unsigned long	mcast_data_sb_err                       :  1;  /* RW */
-	unsigned long	mcast_nack_buff_parity                  :  1;  /* RW */
-	unsigned long	mcast_timeout                           :  1;  /* RW */
-	unsigned long	mcast_inactive_reply                    :  1;  /* RW */
-	unsigned long	mcast_upgrade_error                     :  1;  /* RW */
-	unsigned long	mcast_reg_count_underflow               :  1;  /* RW */
-	unsigned long	mcast_rep_obese_msg                     :  1;  /* RW */
-	unsigned long	ucache_req_runt_msg                     :  1;  /* RW */
-	unsigned long	ucache_req_obese_msg                    :  1;  /* RW */
-	unsigned long	ucache_req_data_sb_err                  :  1;  /* RW */
-	unsigned long	ucache_rep_runt_msg                     :  1;  /* RW */
-	unsigned long	ucache_rep_obese_msg                    :  1;  /* RW */
-	unsigned long	ucache_rep_data_sb_err                  :  1;  /* RW */
-	unsigned long	ucache_rep_command_err                  :  1;  /* RW */
-	unsigned long	ucache_pend_timeout                     :  1;  /* RW */
-	unsigned long	macc_req_runt_msg                       :  1;  /* RW */
-	unsigned long	macc_req_obese_msg                      :  1;  /* RW */
-	unsigned long	macc_req_data_sb_err                    :  1;  /* RW */
-	unsigned long	macc_rep_runt_msg                       :  1;  /* RW */
-	unsigned long	macc_rep_obese_msg                      :  1;  /* RW */
-	unsigned long	macc_rep_data_sb_err                    :  1;  /* RW */
-	unsigned long	macc_amo_timeout                        :  1;  /* RW */
-	unsigned long	macc_put_timeout                        :  1;  /* RW */
-	unsigned long	macc_spurious_event                     :  1;  /* RW */
-	unsigned long	ioh_destination_table_parity            :  1;  /* RW */
-	unsigned long	get_had_error_reply                     :  1;  /* RW */
-	unsigned long	get_timeout                             :  1;  /* RW */
-	unsigned long	lock_manager_had_error_reply            :  1;  /* RW */
-	unsigned long	put_had_error_reply                     :  1;  /* RW */
-	unsigned long	put_timeout                             :  1;  /* RW */
-	unsigned long	sb_activation_overrun                   :  1;  /* RW */
-	unsigned long	completed_gb_activation_had_error_reply :  1;  /* RW */
-	unsigned long	completed_gb_activation_timeout         :  1;  /* RW */
-	unsigned long	descriptor_buffer_0_parity              :  1;  /* RW */
-	unsigned long	descriptor_buffer_1_parity              :  1;  /* RW */
-	unsigned long	socket_destination_table_parity         :  1;  /* RW */
-	unsigned long	bau_reply_payload_corruption            :  1;  /* RW */
-	unsigned long	io_port_destination_table_parity        :  1;  /* RW */
-	unsigned long	intd_soft_ack_timeout                   :  1;  /* RW */
-	unsigned long	int_rep_obese_msg                       :  1;  /* RW */
-	unsigned long	int_rep_command_err                     :  1;  /* RW */
-	unsigned long	int_timeout                             :  1;  /* RW */
-	unsigned long	rsvd_43_63                              : 21;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                          UVH_LOCAL_INT0_CONFIG                            */
-/* ========================================================================= */
-#define UVH_LOCAL_INT0_CONFIG 0x61000UL
-
-#define UVH_LOCAL_INT0_CONFIG_VECTOR_SHFT 0
-#define UVH_LOCAL_INT0_CONFIG_VECTOR_MASK 0x00000000000000ffUL
-#define UVH_LOCAL_INT0_CONFIG_DM_SHFT 8
-#define UVH_LOCAL_INT0_CONFIG_DM_MASK 0x0000000000000700UL
-#define UVH_LOCAL_INT0_CONFIG_DESTMODE_SHFT 11
-#define UVH_LOCAL_INT0_CONFIG_DESTMODE_MASK 0x0000000000000800UL
-#define UVH_LOCAL_INT0_CONFIG_STATUS_SHFT 12
-#define UVH_LOCAL_INT0_CONFIG_STATUS_MASK 0x0000000000001000UL
-#define UVH_LOCAL_INT0_CONFIG_P_SHFT 13
-#define UVH_LOCAL_INT0_CONFIG_P_MASK 0x0000000000002000UL
-#define UVH_LOCAL_INT0_CONFIG_T_SHFT 15
-#define UVH_LOCAL_INT0_CONFIG_T_MASK 0x0000000000008000UL
-#define UVH_LOCAL_INT0_CONFIG_M_SHFT 16
-#define UVH_LOCAL_INT0_CONFIG_M_MASK 0x0000000000010000UL
-#define UVH_LOCAL_INT0_CONFIG_APIC_ID_SHFT 32
-#define UVH_LOCAL_INT0_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
-
-union uvh_local_int0_config_u {
-    unsigned long	v;
-    struct uvh_local_int0_config_s {
-	unsigned long	vector_  :  8;  /* RW */
-	unsigned long	dm       :  3;  /* RW */
-	unsigned long	destmode :  1;  /* RW */
-	unsigned long	status   :  1;  /* RO */
-	unsigned long	p        :  1;  /* RO */
-	unsigned long	rsvd_14  :  1;  /*    */
-	unsigned long	t        :  1;  /* RO */
-	unsigned long	m        :  1;  /* RW */
-	unsigned long	rsvd_17_31: 15;  /*    */
-	unsigned long	apic_id  : 32;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                          UVH_LOCAL_INT0_ENABLE                            */
-/* ========================================================================= */
-#define UVH_LOCAL_INT0_ENABLE 0x65000UL
-
-#define UVH_LOCAL_INT0_ENABLE_LB_HCERR_SHFT 0
-#define UVH_LOCAL_INT0_ENABLE_LB_HCERR_MASK 0x0000000000000001UL
-#define UVH_LOCAL_INT0_ENABLE_GR0_HCERR_SHFT 1
-#define UVH_LOCAL_INT0_ENABLE_GR0_HCERR_MASK 0x0000000000000002UL
-#define UVH_LOCAL_INT0_ENABLE_GR1_HCERR_SHFT 2
-#define UVH_LOCAL_INT0_ENABLE_GR1_HCERR_MASK 0x0000000000000004UL
-#define UVH_LOCAL_INT0_ENABLE_LH_HCERR_SHFT 3
-#define UVH_LOCAL_INT0_ENABLE_LH_HCERR_MASK 0x0000000000000008UL
-#define UVH_LOCAL_INT0_ENABLE_RH_HCERR_SHFT 4
-#define UVH_LOCAL_INT0_ENABLE_RH_HCERR_MASK 0x0000000000000010UL
-#define UVH_LOCAL_INT0_ENABLE_XN_HCERR_SHFT 5
-#define UVH_LOCAL_INT0_ENABLE_XN_HCERR_MASK 0x0000000000000020UL
-#define UVH_LOCAL_INT0_ENABLE_SI_HCERR_SHFT 6
-#define UVH_LOCAL_INT0_ENABLE_SI_HCERR_MASK 0x0000000000000040UL
-#define UVH_LOCAL_INT0_ENABLE_LB_AOERR0_SHFT 7
-#define UVH_LOCAL_INT0_ENABLE_LB_AOERR0_MASK 0x0000000000000080UL
-#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR0_SHFT 8
-#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR0_MASK 0x0000000000000100UL
-#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR0_SHFT 9
-#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR0_MASK 0x0000000000000200UL
-#define UVH_LOCAL_INT0_ENABLE_LH_AOERR0_SHFT 10
-#define UVH_LOCAL_INT0_ENABLE_LH_AOERR0_MASK 0x0000000000000400UL
-#define UVH_LOCAL_INT0_ENABLE_RH_AOERR0_SHFT 11
-#define UVH_LOCAL_INT0_ENABLE_RH_AOERR0_MASK 0x0000000000000800UL
-#define UVH_LOCAL_INT0_ENABLE_XN_AOERR0_SHFT 12
-#define UVH_LOCAL_INT0_ENABLE_XN_AOERR0_MASK 0x0000000000001000UL
-#define UVH_LOCAL_INT0_ENABLE_SI_AOERR0_SHFT 13
-#define UVH_LOCAL_INT0_ENABLE_SI_AOERR0_MASK 0x0000000000002000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_AOERR1_SHFT 14
-#define UVH_LOCAL_INT0_ENABLE_LB_AOERR1_MASK 0x0000000000004000UL
-#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR1_SHFT 15
-#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR1_MASK 0x0000000000008000UL
-#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR1_SHFT 16
-#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR1_MASK 0x0000000000010000UL
-#define UVH_LOCAL_INT0_ENABLE_LH_AOERR1_SHFT 17
-#define UVH_LOCAL_INT0_ENABLE_LH_AOERR1_MASK 0x0000000000020000UL
-#define UVH_LOCAL_INT0_ENABLE_RH_AOERR1_SHFT 18
-#define UVH_LOCAL_INT0_ENABLE_RH_AOERR1_MASK 0x0000000000040000UL
-#define UVH_LOCAL_INT0_ENABLE_XN_AOERR1_SHFT 19
-#define UVH_LOCAL_INT0_ENABLE_XN_AOERR1_MASK 0x0000000000080000UL
-#define UVH_LOCAL_INT0_ENABLE_SI_AOERR1_SHFT 20
-#define UVH_LOCAL_INT0_ENABLE_SI_AOERR1_MASK 0x0000000000100000UL
-#define UVH_LOCAL_INT0_ENABLE_RH_VPI_INT_SHFT 21
-#define UVH_LOCAL_INT0_ENABLE_RH_VPI_INT_MASK 0x0000000000200000UL
-#define UVH_LOCAL_INT0_ENABLE_SYSTEM_SHUTDOWN_INT_SHFT 22
-#define UVH_LOCAL_INT0_ENABLE_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_0_SHFT 23
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_0_MASK 0x0000000000800000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_1_SHFT 24
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_1_MASK 0x0000000001000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_2_SHFT 25
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_2_MASK 0x0000000002000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_3_SHFT 26
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_3_MASK 0x0000000004000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_4_SHFT 27
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_4_MASK 0x0000000008000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_5_SHFT 28
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_5_MASK 0x0000000010000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_6_SHFT 29
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_6_MASK 0x0000000020000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_7_SHFT 30
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_7_MASK 0x0000000040000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_8_SHFT 31
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_8_MASK 0x0000000080000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_9_SHFT 32
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_9_MASK 0x0000000100000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_10_SHFT 33
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_10_MASK 0x0000000200000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_11_SHFT 34
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_11_MASK 0x0000000400000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_12_SHFT 35
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_12_MASK 0x0000000800000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_13_SHFT 36
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_13_MASK 0x0000001000000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_14_SHFT 37
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_14_MASK 0x0000002000000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_15_SHFT 38
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_15_MASK 0x0000004000000000UL
-#define UVH_LOCAL_INT0_ENABLE_L1_NMI_INT_SHFT 39
-#define UVH_LOCAL_INT0_ENABLE_L1_NMI_INT_MASK 0x0000008000000000UL
-#define UVH_LOCAL_INT0_ENABLE_STOP_CLOCK_SHFT 40
-#define UVH_LOCAL_INT0_ENABLE_STOP_CLOCK_MASK 0x0000010000000000UL
-#define UVH_LOCAL_INT0_ENABLE_ASIC_TO_L1_SHFT 41
-#define UVH_LOCAL_INT0_ENABLE_ASIC_TO_L1_MASK 0x0000020000000000UL
-#define UVH_LOCAL_INT0_ENABLE_L1_TO_ASIC_SHFT 42
-#define UVH_LOCAL_INT0_ENABLE_L1_TO_ASIC_MASK 0x0000040000000000UL
-#define UVH_LOCAL_INT0_ENABLE_LTC_INT_SHFT 43
-#define UVH_LOCAL_INT0_ENABLE_LTC_INT_MASK 0x0000080000000000UL
-#define UVH_LOCAL_INT0_ENABLE_LA_SEQ_TRIGGER_SHFT 44
-#define UVH_LOCAL_INT0_ENABLE_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL
-
-union uvh_local_int0_enable_u {
-    unsigned long	v;
-    struct uvh_local_int0_enable_s {
-	unsigned long	lb_hcerr            :  1;  /* RW */
-	unsigned long	gr0_hcerr           :  1;  /* RW */
-	unsigned long	gr1_hcerr           :  1;  /* RW */
-	unsigned long	lh_hcerr            :  1;  /* RW */
-	unsigned long	rh_hcerr            :  1;  /* RW */
-	unsigned long	xn_hcerr            :  1;  /* RW */
-	unsigned long	si_hcerr            :  1;  /* RW */
-	unsigned long	lb_aoerr0           :  1;  /* RW */
-	unsigned long	gr0_aoerr0          :  1;  /* RW */
-	unsigned long	gr1_aoerr0          :  1;  /* RW */
-	unsigned long	lh_aoerr0           :  1;  /* RW */
-	unsigned long	rh_aoerr0           :  1;  /* RW */
-	unsigned long	xn_aoerr0           :  1;  /* RW */
-	unsigned long	si_aoerr0           :  1;  /* RW */
-	unsigned long	lb_aoerr1           :  1;  /* RW */
-	unsigned long	gr0_aoerr1          :  1;  /* RW */
-	unsigned long	gr1_aoerr1          :  1;  /* RW */
-	unsigned long	lh_aoerr1           :  1;  /* RW */
-	unsigned long	rh_aoerr1           :  1;  /* RW */
-	unsigned long	xn_aoerr1           :  1;  /* RW */
-	unsigned long	si_aoerr1           :  1;  /* RW */
-	unsigned long	rh_vpi_int          :  1;  /* RW */
-	unsigned long	system_shutdown_int :  1;  /* RW */
-	unsigned long	lb_irq_int_0        :  1;  /* RW */
-	unsigned long	lb_irq_int_1        :  1;  /* RW */
-	unsigned long	lb_irq_int_2        :  1;  /* RW */
-	unsigned long	lb_irq_int_3        :  1;  /* RW */
-	unsigned long	lb_irq_int_4        :  1;  /* RW */
-	unsigned long	lb_irq_int_5        :  1;  /* RW */
-	unsigned long	lb_irq_int_6        :  1;  /* RW */
-	unsigned long	lb_irq_int_7        :  1;  /* RW */
-	unsigned long	lb_irq_int_8        :  1;  /* RW */
-	unsigned long	lb_irq_int_9        :  1;  /* RW */
-	unsigned long	lb_irq_int_10       :  1;  /* RW */
-	unsigned long	lb_irq_int_11       :  1;  /* RW */
-	unsigned long	lb_irq_int_12       :  1;  /* RW */
-	unsigned long	lb_irq_int_13       :  1;  /* RW */
-	unsigned long	lb_irq_int_14       :  1;  /* RW */
-	unsigned long	lb_irq_int_15       :  1;  /* RW */
-	unsigned long	l1_nmi_int          :  1;  /* RW */
-	unsigned long	stop_clock          :  1;  /* RW */
-	unsigned long	asic_to_l1          :  1;  /* RW */
-	unsigned long	l1_to_asic          :  1;  /* RW */
-	unsigned long	ltc_int             :  1;  /* RW */
-	unsigned long	la_seq_trigger      :  1;  /* RW */
-	unsigned long	rsvd_45_63          : 19;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                               UVH_NODE_ID                                 */
-/* ========================================================================= */
-#define UVH_NODE_ID 0x0UL
-
-#define UVH_NODE_ID_FORCE1_SHFT 0
-#define UVH_NODE_ID_FORCE1_MASK 0x0000000000000001UL
-#define UVH_NODE_ID_MANUFACTURER_SHFT 1
-#define UVH_NODE_ID_MANUFACTURER_MASK 0x0000000000000ffeUL
-#define UVH_NODE_ID_PART_NUMBER_SHFT 12
-#define UVH_NODE_ID_PART_NUMBER_MASK 0x000000000ffff000UL
-#define UVH_NODE_ID_REVISION_SHFT 28
-#define UVH_NODE_ID_REVISION_MASK 0x00000000f0000000UL
-#define UVH_NODE_ID_NODE_ID_SHFT 32
-#define UVH_NODE_ID_NODE_ID_MASK 0x00007fff00000000UL
-#define UVH_NODE_ID_NODES_PER_BIT_SHFT 48
-#define UVH_NODE_ID_NODES_PER_BIT_MASK 0x007f000000000000UL
-#define UVH_NODE_ID_NI_PORT_SHFT 56
-#define UVH_NODE_ID_NI_PORT_MASK 0x0f00000000000000UL
-
-union uvh_node_id_u {
-    unsigned long	v;
-    struct uvh_node_id_s {
-	unsigned long	force1        :  1;  /* RO */
-	unsigned long	manufacturer  : 11;  /* RO */
-	unsigned long	part_number   : 16;  /* RO */
-	unsigned long	revision      :  4;  /* RO */
-	unsigned long	node_id       : 15;  /* RW */
-	unsigned long	rsvd_47       :  1;  /*    */
-	unsigned long	nodes_per_bit :  7;  /* RW */
-	unsigned long	rsvd_55       :  1;  /*    */
-	unsigned long	ni_port       :  4;  /* RO */
-	unsigned long	rsvd_60_63    :  4;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                          UVH_NODE_PRESENT_TABLE                           */
-/* ========================================================================= */
-#define UVH_NODE_PRESENT_TABLE 0x1400UL
-#define UVH_NODE_PRESENT_TABLE_DEPTH 16
-
-#define UVH_NODE_PRESENT_TABLE_NODES_SHFT 0
-#define UVH_NODE_PRESENT_TABLE_NODES_MASK 0xffffffffffffffffUL
-
-union uvh_node_present_table_u {
-    unsigned long	v;
-    struct uvh_node_present_table_s {
-	unsigned long	nodes : 64;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR                  */
-/* ========================================================================= */
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL
-
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT 24
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_MASK 0x00003fffff000000UL
-
-union uvh_rh_gam_alias210_redirect_config_0_mmr_u {
-    unsigned long	v;
-    struct uvh_rh_gam_alias210_redirect_config_0_mmr_s {
-	unsigned long	rsvd_0_23 : 24;  /*    */
-	unsigned long	dest_base : 22;  /* RW */
-	unsigned long	rsvd_46_63: 18;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR                  */
-/* ========================================================================= */
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL
-
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_SHFT 24
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_MASK 0x00003fffff000000UL
-
-union uvh_rh_gam_alias210_redirect_config_1_mmr_u {
-    unsigned long	v;
-    struct uvh_rh_gam_alias210_redirect_config_1_mmr_s {
-	unsigned long	rsvd_0_23 : 24;  /*    */
-	unsigned long	dest_base : 22;  /* RW */
-	unsigned long	rsvd_46_63: 18;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR                  */
-/* ========================================================================= */
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL
-
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_SHFT 24
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_MASK 0x00003fffff000000UL
-
-union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
-    unsigned long	v;
-    struct uvh_rh_gam_alias210_redirect_config_2_mmr_s {
-	unsigned long	rsvd_0_23 : 24;  /*    */
-	unsigned long	dest_base : 22;  /* RW */
-	unsigned long	rsvd_46_63: 18;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                    UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR                      */
-/* ========================================================================= */
-#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR 0x1600020UL
-
-#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_SHFT 26
-#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
-#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
-#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_rh_gam_cfg_overlay_config_mmr_u {
-    unsigned long	v;
-    struct uvh_rh_gam_cfg_overlay_config_mmr_s {
-	unsigned long	rsvd_0_25: 26;  /*    */
-	unsigned long	base   : 20;  /* RW */
-	unsigned long	rsvd_46_62: 17;  /*    */
-	unsigned long	enable :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                    UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR                      */
-/* ========================================================================= */
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
-
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_SHFT 48
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_MASK 0x0001000000000000UL
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_rh_gam_gru_overlay_config_mmr_u {
-    unsigned long	v;
-    struct uvh_rh_gam_gru_overlay_config_mmr_s {
-	unsigned long	rsvd_0_27: 28;  /*    */
-	unsigned long	base   : 18;  /* RW */
-	unsigned long	rsvd_46_47:  2;  /*    */
-	unsigned long	gr4    :  1;  /* RW */
-	unsigned long	rsvd_49_51:  3;  /*    */
-	unsigned long	n_gru  :  4;  /* RW */
-	unsigned long	rsvd_56_62:  7;  /*    */
-	unsigned long	enable :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                   UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR                     */
-/* ========================================================================= */
-#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR 0x1600030UL
-
-#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT 30
-#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003fffc0000000UL
-#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_SHFT 46
-#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_MASK 0x000fc00000000000UL
-#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_SHFT 52
-#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_MASK 0x00f0000000000000UL
-#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
-#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_rh_gam_mmioh_overlay_config_mmr_u {
-    unsigned long	v;
-    struct uvh_rh_gam_mmioh_overlay_config_mmr_s {
-	unsigned long	rsvd_0_29: 30;  /*    */
-	unsigned long	base   : 16;  /* RW */
-	unsigned long	m_io   :  6;  /* RW */
-	unsigned long	n_io   :  4;  /* RW */
-	unsigned long	rsvd_56_62:  7;  /*    */
-	unsigned long	enable :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                    UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR                      */
-/* ========================================================================= */
-#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
-
-#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26
-#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
-#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_SHFT 46
-#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_MASK 0x0000400000000000UL
-#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
-#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_rh_gam_mmr_overlay_config_mmr_u {
-    unsigned long	v;
-    struct uvh_rh_gam_mmr_overlay_config_mmr_s {
-	unsigned long	rsvd_0_25: 26;  /*    */
-	unsigned long	base     : 20;  /* RW */
-	unsigned long	dual_hub :  1;  /* RW */
-	unsigned long	rsvd_47_62: 16;  /*    */
-	unsigned long	enable   :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                                 UVH_RTC                                   */
-/* ========================================================================= */
-#define UVH_RTC 0x340000UL
-
-#define UVH_RTC_REAL_TIME_CLOCK_SHFT 0
-#define UVH_RTC_REAL_TIME_CLOCK_MASK 0x00ffffffffffffffUL
-
-union uvh_rtc_u {
-    unsigned long	v;
-    struct uvh_rtc_s {
-	unsigned long	real_time_clock : 56;  /* RW */
-	unsigned long	rsvd_56_63      :  8;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                           UVH_RTC1_INT_CONFIG                             */
-/* ========================================================================= */
-#define UVH_RTC1_INT_CONFIG 0x615c0UL
-
-#define UVH_RTC1_INT_CONFIG_VECTOR_SHFT 0
-#define UVH_RTC1_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
-#define UVH_RTC1_INT_CONFIG_DM_SHFT 8
-#define UVH_RTC1_INT_CONFIG_DM_MASK 0x0000000000000700UL
-#define UVH_RTC1_INT_CONFIG_DESTMODE_SHFT 11
-#define UVH_RTC1_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
-#define UVH_RTC1_INT_CONFIG_STATUS_SHFT 12
-#define UVH_RTC1_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
-#define UVH_RTC1_INT_CONFIG_P_SHFT 13
-#define UVH_RTC1_INT_CONFIG_P_MASK 0x0000000000002000UL
-#define UVH_RTC1_INT_CONFIG_T_SHFT 15
-#define UVH_RTC1_INT_CONFIG_T_MASK 0x0000000000008000UL
-#define UVH_RTC1_INT_CONFIG_M_SHFT 16
-#define UVH_RTC1_INT_CONFIG_M_MASK 0x0000000000010000UL
-#define UVH_RTC1_INT_CONFIG_APIC_ID_SHFT 32
-#define UVH_RTC1_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
-
-union uvh_rtc1_int_config_u {
-    unsigned long	v;
-    struct uvh_rtc1_int_config_s {
-	unsigned long	vector_  :  8;  /* RW */
-	unsigned long	dm       :  3;  /* RW */
-	unsigned long	destmode :  1;  /* RW */
-	unsigned long	status   :  1;  /* RO */
-	unsigned long	p        :  1;  /* RO */
-	unsigned long	rsvd_14  :  1;  /*    */
-	unsigned long	t        :  1;  /* RO */
-	unsigned long	m        :  1;  /* RW */
-	unsigned long	rsvd_17_31: 15;  /*    */
-	unsigned long	apic_id  : 32;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                           UVH_RTC2_INT_CONFIG                             */
-/* ========================================================================= */
-#define UVH_RTC2_INT_CONFIG 0x61600UL
-
-#define UVH_RTC2_INT_CONFIG_VECTOR_SHFT 0
-#define UVH_RTC2_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
-#define UVH_RTC2_INT_CONFIG_DM_SHFT 8
-#define UVH_RTC2_INT_CONFIG_DM_MASK 0x0000000000000700UL
-#define UVH_RTC2_INT_CONFIG_DESTMODE_SHFT 11
-#define UVH_RTC2_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
-#define UVH_RTC2_INT_CONFIG_STATUS_SHFT 12
-#define UVH_RTC2_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
-#define UVH_RTC2_INT_CONFIG_P_SHFT 13
-#define UVH_RTC2_INT_CONFIG_P_MASK 0x0000000000002000UL
-#define UVH_RTC2_INT_CONFIG_T_SHFT 15
-#define UVH_RTC2_INT_CONFIG_T_MASK 0x0000000000008000UL
-#define UVH_RTC2_INT_CONFIG_M_SHFT 16
-#define UVH_RTC2_INT_CONFIG_M_MASK 0x0000000000010000UL
-#define UVH_RTC2_INT_CONFIG_APIC_ID_SHFT 32
-#define UVH_RTC2_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
-
-union uvh_rtc2_int_config_u {
-    unsigned long	v;
-    struct uvh_rtc2_int_config_s {
-	unsigned long	vector_  :  8;  /* RW */
-	unsigned long	dm       :  3;  /* RW */
-	unsigned long	destmode :  1;  /* RW */
-	unsigned long	status   :  1;  /* RO */
-	unsigned long	p        :  1;  /* RO */
-	unsigned long	rsvd_14  :  1;  /*    */
-	unsigned long	t        :  1;  /* RO */
-	unsigned long	m        :  1;  /* RW */
-	unsigned long	rsvd_17_31: 15;  /*    */
-	unsigned long	apic_id  : 32;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                           UVH_RTC3_INT_CONFIG                             */
-/* ========================================================================= */
-#define UVH_RTC3_INT_CONFIG 0x61640UL
-
-#define UVH_RTC3_INT_CONFIG_VECTOR_SHFT 0
-#define UVH_RTC3_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
-#define UVH_RTC3_INT_CONFIG_DM_SHFT 8
-#define UVH_RTC3_INT_CONFIG_DM_MASK 0x0000000000000700UL
-#define UVH_RTC3_INT_CONFIG_DESTMODE_SHFT 11
-#define UVH_RTC3_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
-#define UVH_RTC3_INT_CONFIG_STATUS_SHFT 12
-#define UVH_RTC3_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
-#define UVH_RTC3_INT_CONFIG_P_SHFT 13
-#define UVH_RTC3_INT_CONFIG_P_MASK 0x0000000000002000UL
-#define UVH_RTC3_INT_CONFIG_T_SHFT 15
-#define UVH_RTC3_INT_CONFIG_T_MASK 0x0000000000008000UL
-#define UVH_RTC3_INT_CONFIG_M_SHFT 16
-#define UVH_RTC3_INT_CONFIG_M_MASK 0x0000000000010000UL
-#define UVH_RTC3_INT_CONFIG_APIC_ID_SHFT 32
-#define UVH_RTC3_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
-
-union uvh_rtc3_int_config_u {
-    unsigned long	v;
-    struct uvh_rtc3_int_config_s {
-	unsigned long	vector_  :  8;  /* RW */
-	unsigned long	dm       :  3;  /* RW */
-	unsigned long	destmode :  1;  /* RW */
-	unsigned long	status   :  1;  /* RO */
-	unsigned long	p        :  1;  /* RO */
-	unsigned long	rsvd_14  :  1;  /*    */
-	unsigned long	t        :  1;  /* RO */
-	unsigned long	m        :  1;  /* RW */
-	unsigned long	rsvd_17_31: 15;  /*    */
-	unsigned long	apic_id  : 32;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                            UVH_RTC_INC_RATIO                              */
-/* ========================================================================= */
-#define UVH_RTC_INC_RATIO 0x350000UL
-
-#define UVH_RTC_INC_RATIO_FRACTION_SHFT 0
-#define UVH_RTC_INC_RATIO_FRACTION_MASK 0x00000000000fffffUL
-#define UVH_RTC_INC_RATIO_RATIO_SHFT 20
-#define UVH_RTC_INC_RATIO_RATIO_MASK 0x0000000000700000UL
-
-union uvh_rtc_inc_ratio_u {
-    unsigned long	v;
-    struct uvh_rtc_inc_ratio_s {
-	unsigned long	fraction : 20;  /* RW */
-	unsigned long	ratio    :  3;  /* RW */
-	unsigned long	rsvd_23_63: 41;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                          UVH_SI_ADDR_MAP_CONFIG                           */
-/* ========================================================================= */
-#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
-
-#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0
-#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL
-#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8
-#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL
-
-union uvh_si_addr_map_config_u {
-    unsigned long	v;
-    struct uvh_si_addr_map_config_s {
-	unsigned long	m_skt :  6;  /* RW */
-	unsigned long	rsvd_6_7:  2;  /*    */
-	unsigned long	n_skt :  4;  /* RW */
-	unsigned long	rsvd_12_63: 52;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                       UVH_SI_ALIAS0_OVERLAY_CONFIG                        */
-/* ========================================================================= */
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL
-
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias0_overlay_config_u {
-    unsigned long	v;
-    struct uvh_si_alias0_overlay_config_s {
-	unsigned long	rsvd_0_23: 24;  /*    */
-	unsigned long	base    :  8;  /* RW */
-	unsigned long	rsvd_32_47: 16;  /*    */
-	unsigned long	m_alias :  5;  /* RW */
-	unsigned long	rsvd_53_62: 10;  /*    */
-	unsigned long	enable  :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                       UVH_SI_ALIAS1_OVERLAY_CONFIG                        */
-/* ========================================================================= */
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL
-
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias1_overlay_config_u {
-    unsigned long	v;
-    struct uvh_si_alias1_overlay_config_s {
-	unsigned long	rsvd_0_23: 24;  /*    */
-	unsigned long	base    :  8;  /* RW */
-	unsigned long	rsvd_32_47: 16;  /*    */
-	unsigned long	m_alias :  5;  /* RW */
-	unsigned long	rsvd_53_62: 10;  /*    */
-	unsigned long	enable  :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                       UVH_SI_ALIAS2_OVERLAY_CONFIG                        */
-/* ========================================================================= */
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL
-
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias2_overlay_config_u {
-    unsigned long	v;
-    struct uvh_si_alias2_overlay_config_s {
-	unsigned long	rsvd_0_23: 24;  /*    */
-	unsigned long	base    :  8;  /* RW */
-	unsigned long	rsvd_32_47: 16;  /*    */
-	unsigned long	m_alias :  5;  /* RW */
-	unsigned long	rsvd_53_62: 10;  /*    */
-	unsigned long	enable  :  1;  /* RW */
-    } s;
-};
-
-
-#endif /* ASM_X86__UV__UV_MMRS_H */
diff --git a/include/asm-x86/vdso.h b/include/asm-x86/vdso.h
deleted file mode 100644
index 4ab3209..0000000
--- a/include/asm-x86/vdso.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef ASM_X86__VDSO_H
-#define ASM_X86__VDSO_H
-
-#ifdef CONFIG_X86_64
-extern const char VDSO64_PRELINK[];
-
-/*
- * Given a pointer to the vDSO image, find the pointer to VDSO64_name
- * as that symbol is defined in the vDSO sources or linker script.
- */
-#define VDSO64_SYMBOL(base, name)					\
-({									\
-	extern const char VDSO64_##name[];				\
-	(void *)(VDSO64_##name - VDSO64_PRELINK + (unsigned long)(base)); \
-})
-#endif
-
-#if defined CONFIG_X86_32 || defined CONFIG_COMPAT
-extern const char VDSO32_PRELINK[];
-
-/*
- * Given a pointer to the vDSO image, find the pointer to VDSO32_name
- * as that symbol is defined in the vDSO sources or linker script.
- */
-#define VDSO32_SYMBOL(base, name)					\
-({									\
-	extern const char VDSO32_##name[];				\
-	(void *)(VDSO32_##name - VDSO32_PRELINK + (unsigned long)(base)); \
-})
-#endif
-
-/*
- * These symbols are defined with the addresses in the vsyscall page.
- * See vsyscall-sigreturn.S.
- */
-extern void __user __kernel_sigreturn;
-extern void __user __kernel_rt_sigreturn;
-
-/*
- * These symbols are defined by vdso32.S to mark the bounds
- * of the ELF DSO images included therein.
- */
-extern const char vdso32_int80_start, vdso32_int80_end;
-extern const char vdso32_syscall_start, vdso32_syscall_end;
-extern const char vdso32_sysenter_start, vdso32_sysenter_end;
-
-#endif /* ASM_X86__VDSO_H */
diff --git a/include/asm-x86/vga.h b/include/asm-x86/vga.h
deleted file mode 100644
index b9e493d..0000000
--- a/include/asm-x86/vga.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *	Access to VGA videoram
- *
- *	(c) 1998 Martin Mares <mj@ucw.cz>
- */
-
-#ifndef ASM_X86__VGA_H
-#define ASM_X86__VGA_H
-
-/*
- *	On the PC, we can just recalculate addresses and then
- *	access the videoram directly without any black magic.
- */
-
-#define VGA_MAP_MEM(x, s) (unsigned long)phys_to_virt(x)
-
-#define vga_readb(x) (*(x))
-#define vga_writeb(x, y) (*(y) = (x))
-
-#endif /* ASM_X86__VGA_H */
diff --git a/include/asm-x86/vgtod.h b/include/asm-x86/vgtod.h
deleted file mode 100644
index 38fd133..0000000
--- a/include/asm-x86/vgtod.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef ASM_X86__VGTOD_H
-#define ASM_X86__VGTOD_H
-
-#include <asm/vsyscall.h>
-#include <linux/clocksource.h>
-
-struct vsyscall_gtod_data {
-	seqlock_t	lock;
-
-	/* open coded 'struct timespec' */
-	time_t		wall_time_sec;
-	u32		wall_time_nsec;
-
-	int		sysctl_enabled;
-	struct timezone sys_tz;
-	struct { /* extract of a clocksource struct */
-		cycle_t (*vread)(void);
-		cycle_t	cycle_last;
-		cycle_t	mask;
-		u32	mult;
-		u32	shift;
-	} clock;
-	struct timespec wall_to_monotonic;
-};
-extern struct vsyscall_gtod_data __vsyscall_gtod_data
-__section_vsyscall_gtod_data;
-extern struct vsyscall_gtod_data vsyscall_gtod_data;
-
-#endif /* ASM_X86__VGTOD_H */
diff --git a/include/asm-x86/visws/cobalt.h b/include/asm-x86/visws/cobalt.h
deleted file mode 100644
index 9627a8f..0000000
--- a/include/asm-x86/visws/cobalt.h
+++ /dev/null
@@ -1,125 +0,0 @@
-#ifndef ASM_X86__VISWS__COBALT_H
-#define ASM_X86__VISWS__COBALT_H
-
-#include <asm/fixmap.h>
-
-/*
- * Cobalt SGI Visual Workstation system ASIC
- */ 
-
-#define CO_CPU_NUM_PHYS 0x1e00
-#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2)
-
-#define CO_CPU_MAX 4
-
-#define	CO_CPU_PHYS		0xc2000000
-#define	CO_APIC_PHYS		0xc4000000
-
-/* see set_fixmap() and asm/fixmap.h */
-#define	CO_CPU_VADDR		(fix_to_virt(FIX_CO_CPU))
-#define	CO_APIC_VADDR		(fix_to_virt(FIX_CO_APIC))
-
-/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */
-#define	CO_CPU_REV		0x08
-#define	CO_CPU_CTRL		0x10
-#define	CO_CPU_STAT		0x20
-#define	CO_CPU_TIMEVAL		0x30
-
-/* CO_CPU_CTRL bits */
-#define	CO_CTRL_TIMERUN		0x04		/* 0 == disabled */
-#define	CO_CTRL_TIMEMASK	0x08		/* 0 == unmasked */
-
-/* CO_CPU_STATUS bits */
-#define	CO_STAT_TIMEINTR	0x02	/* (r) 1 == int pend, (w) 0 == clear */
-
-/* CO_CPU_TIMEVAL value */
-#define	CO_TIME_HZ		100000000	/* Cobalt core rate */
-
-/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */
-#define	CO_APIC_HI(n)		(((n) * 0x10) + 4)
-#define	CO_APIC_LO(n)		((n) * 0x10)
-#define	CO_APIC_ID		0x0ffc
-
-/* CO_APIC_ID bits */
-#define	CO_APIC_ENABLE		0x00000100
-
-/* CO_APIC_LO bits */
-#define	CO_APIC_MASK		0x00010000	/* 0 = enabled */
-#define	CO_APIC_LEVEL		0x00008000	/* 0 = edge */
-
-/*
- * Where things are physically wired to Cobalt
- * #defines with no board _<type>_<rev>_ are common to all (thus far)
- */
-#define	CO_APIC_IDE0		4
-#define CO_APIC_IDE1		2		/* Only on 320 */
-
-#define	CO_APIC_8259		12		/* serial, floppy, par-l-l */
-
-/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */
-#define	CO_APIC_PCIA_BASE0	0 /* and 1 */	/* slot 0, line 0 */
-#define	CO_APIC_PCIA_BASE123	5 /* and 6 */	/* slot 0, line 1 */
-
-#define	CO_APIC_PIIX4_USB	7		/* this one is weird */
-
-/* Lithium PCI Bridge B -- "the one with PIIX4" */
-#define	CO_APIC_PCIB_BASE0	8 /* and 9-12 *//* slot 0, line 0 */
-#define	CO_APIC_PCIB_BASE123	13 /* 14.15 */	/* slot 0, line 1 */
-
-#define	CO_APIC_VIDOUT0		16
-#define	CO_APIC_VIDOUT1		17
-#define	CO_APIC_VIDIN0		18
-#define	CO_APIC_VIDIN1		19
-
-#define	CO_APIC_LI_AUDIO	22
-
-#define	CO_APIC_AS		24
-#define	CO_APIC_RE		25
-
-#define CO_APIC_CPU		28		/* Timer and Cache interrupt */
-#define	CO_APIC_NMI		29
-#define	CO_APIC_LAST		CO_APIC_NMI
-
-/*
- * This is how irqs are assigned on the Visual Workstation.
- * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU).
- * All other devices (including PCI) go to Cobalt and are irq's 16 on up.
- */
-#define	CO_IRQ_APIC0	16			/* irq of apic entry 0 */
-#define	IS_CO_APIC(irq)	((irq) >= CO_IRQ_APIC0)
-#define	CO_IRQ(apic)	(CO_IRQ_APIC0 + (apic))	/* apic ent to irq */
-#define	CO_APIC(irq)	((irq) - CO_IRQ_APIC0)	/* irq to apic ent */
-#define CO_IRQ_IDE0	14			/* knowledge of... */
-#define CO_IRQ_IDE1	15			/* ... ide driver defaults! */
-#define	CO_IRQ_8259	CO_IRQ(CO_APIC_8259)
-
-#ifdef CONFIG_X86_VISWS_APIC
-static inline void co_cpu_write(unsigned long reg, unsigned long v)
-{
-	*((volatile unsigned long *)(CO_CPU_VADDR+reg))=v;
-}
-
-static inline unsigned long co_cpu_read(unsigned long reg)
-{
-	return *((volatile unsigned long *)(CO_CPU_VADDR+reg));
-}            
-             
-static inline void co_apic_write(unsigned long reg, unsigned long v)
-{
-	*((volatile unsigned long *)(CO_APIC_VADDR+reg))=v;
-}            
-             
-static inline unsigned long co_apic_read(unsigned long reg)
-{
-	return *((volatile unsigned long *)(CO_APIC_VADDR+reg));
-}
-#endif
-
-extern char visws_board_type;
-
-#define	VISWS_320	0
-#define	VISWS_540	1
-
-extern char visws_board_rev;
-
-#endif /* ASM_X86__VISWS__COBALT_H */
diff --git a/include/asm-x86/visws/lithium.h b/include/asm-x86/visws/lithium.h
deleted file mode 100644
index b36d3b3..0000000
--- a/include/asm-x86/visws/lithium.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef ASM_X86__VISWS__LITHIUM_H
-#define ASM_X86__VISWS__LITHIUM_H
-
-#include <asm/fixmap.h>
-
-/*
- * Lithium is the SGI Visual Workstation I/O ASIC
- */
-
-#define	LI_PCI_A_PHYS		0xfc000000	/* Enet is dev 3 */
-#define	LI_PCI_B_PHYS		0xfd000000	/* PIIX4 is here */
-
-/* see set_fixmap() and asm/fixmap.h */
-#define LI_PCIA_VADDR   (fix_to_virt(FIX_LI_PCIA))
-#define LI_PCIB_VADDR   (fix_to_virt(FIX_LI_PCIB))
-
-/* Not a standard PCI? (not in linux/pci.h) */
-#define	LI_PCI_BUSNUM	0x44			/* lo8: primary, hi8: sub */
-#define LI_PCI_INTEN    0x46
-
-/* LI_PCI_INTENT bits */
-#define	LI_INTA_0	0x0001
-#define	LI_INTA_1	0x0002
-#define	LI_INTA_2	0x0004
-#define	LI_INTA_3	0x0008
-#define	LI_INTA_4	0x0010
-#define	LI_INTB		0x0020
-#define	LI_INTC		0x0040
-#define	LI_INTD		0x0080
-
-/* More special purpose macros... */
-static inline void li_pcia_write16(unsigned long reg, unsigned short v)
-{
-	*((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v;
-}
-
-static inline unsigned short li_pcia_read16(unsigned long reg)
-{
-	 return *((volatile unsigned short *)(LI_PCIA_VADDR+reg));
-}
-
-static inline void li_pcib_write16(unsigned long reg, unsigned short v)
-{
-	*((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v;
-}
-
-static inline unsigned short li_pcib_read16(unsigned long reg)
-{
-	return *((volatile unsigned short *)(LI_PCIB_VADDR+reg));
-}
-
-#endif /* ASM_X86__VISWS__LITHIUM_H */
-
diff --git a/include/asm-x86/visws/piix4.h b/include/asm-x86/visws/piix4.h
deleted file mode 100644
index 61c9380..0000000
--- a/include/asm-x86/visws/piix4.h
+++ /dev/null
@@ -1,107 +0,0 @@
-#ifndef ASM_X86__VISWS__PIIX4_H
-#define ASM_X86__VISWS__PIIX4_H
-
-/*
- * PIIX4 as used on SGI Visual Workstations
- */
-
-#define	PIIX_PM_START		0x0F80
-
-#define	SIO_GPIO_START		0x0FC0
-
-#define	SIO_PM_START		0x0FC8
-
-#define	PMBASE			PIIX_PM_START
-#define	GPIREG0			(PMBASE+0x30)
-#define	GPIREG(x)		(GPIREG0+((x)/8))
-#define	GPIBIT(x)		(1 << ((x)%8))
-
-#define	PIIX_GPI_BD_ID1		18
-#define	PIIX_GPI_BD_ID2		19
-#define	PIIX_GPI_BD_ID3		20
-#define	PIIX_GPI_BD_ID4		21
-#define	PIIX_GPI_BD_REG		GPIREG(PIIX_GPI_BD_ID1)
-#define	PIIX_GPI_BD_MASK	(GPIBIT(PIIX_GPI_BD_ID1) | \
-				GPIBIT(PIIX_GPI_BD_ID2) | \
-				GPIBIT(PIIX_GPI_BD_ID3) | \
-				GPIBIT(PIIX_GPI_BD_ID4) )
-
-#define	PIIX_GPI_BD_SHIFT	(PIIX_GPI_BD_ID1 % 8)
-
-#define	SIO_INDEX		0x2e
-#define	SIO_DATA		0x2f
-
-#define	SIO_DEV_SEL		0x7
-#define	SIO_DEV_ENB		0x30
-#define	SIO_DEV_MSB		0x60
-#define	SIO_DEV_LSB		0x61
-
-#define	SIO_GP_DEV		0x7
-
-#define	SIO_GP_BASE		SIO_GPIO_START
-#define	SIO_GP_MSB		(SIO_GP_BASE>>8)
-#define	SIO_GP_LSB		(SIO_GP_BASE&0xff)
-
-#define	SIO_GP_DATA1		(SIO_GP_BASE+0)
-
-#define	SIO_PM_DEV		0x8
-
-#define	SIO_PM_BASE		SIO_PM_START
-#define	SIO_PM_MSB		(SIO_PM_BASE>>8)
-#define	SIO_PM_LSB		(SIO_PM_BASE&0xff)
-#define	SIO_PM_INDEX		(SIO_PM_BASE+0)
-#define	SIO_PM_DATA		(SIO_PM_BASE+1)
-
-#define	SIO_PM_FER2		0x1
-
-#define	SIO_PM_GP_EN		0x80
-
-
-
-/*
- * This is the dev/reg where generating a config cycle will
- * result in a PCI special cycle.
- */
-#define SPECIAL_DEV		0xff
-#define SPECIAL_REG		0x00
-
-/*
- * PIIX4 needs to see a special cycle with the following data
- * to be convinced the processor has gone into the stop grant
- * state.  PIIX4 insists on seeing this before it will power
- * down a system.
- */
-#define PIIX_SPECIAL_STOP		0x00120002
-
-#define PIIX4_RESET_PORT	0xcf9
-#define PIIX4_RESET_VAL		0x6
-
-#define PMSTS_PORT		0xf80	// 2 bytes	PM Status
-#define PMEN_PORT		0xf82	// 2 bytes	PM Enable
-#define	PMCNTRL_PORT		0xf84	// 2 bytes	PM Control
-
-#define PM_SUSPEND_ENABLE	0x2000	// start sequence to suspend state
-
-/*
- * PMSTS and PMEN I/O bit definitions.
- * (Bits are the same in both registers)
- */
-#define PM_STS_RSM		(1<<15)	// Resume Status
-#define PM_STS_PWRBTNOR		(1<<11)	// Power Button Override
-#define PM_STS_RTC		(1<<10)	// RTC status
-#define PM_STS_PWRBTN		(1<<8)	// Power Button Pressed?
-#define PM_STS_GBL		(1<<5)	// Global Status
-#define PM_STS_BM		(1<<4)	// Bus Master Status
-#define PM_STS_TMROF		(1<<0)	// Timer Overflow Status.
-
-/*
- * Stop clock GPI register
- */
-#define PIIX_GPIREG0			(0xf80 + 0x30)
-
-/*
- * Stop clock GPI bit in GPIREG0
- */
-#define	PIIX_GPI_STPCLK		0x4	// STPCLK signal routed back in
-
-#endif /* ASM_X86__VISWS__PIIX4_H */
diff --git a/include/asm-x86/vm86.h b/include/asm-x86/vm86.h
deleted file mode 100644
index 998bd18..0000000
--- a/include/asm-x86/vm86.h
+++ /dev/null
@@ -1,208 +0,0 @@
-#ifndef ASM_X86__VM86_H
-#define ASM_X86__VM86_H
-
-/*
- * I'm guessing at the VIF/VIP flag usage, but hope that this is how
- * the Pentium uses them. Linux will return from vm86 mode when both
- * VIF and VIP is set.
- *
- * On a Pentium, we could probably optimize the virtual flags directly
- * in the eflags register instead of doing it "by hand" in vflags...
- *
- * Linus
- */
-
-#include <asm/processor-flags.h>
-
-#define BIOSSEG		0x0f000
-
-#define CPU_086		0
-#define CPU_186		1
-#define CPU_286		2
-#define CPU_386		3
-#define CPU_486		4
-#define CPU_586		5
-
-/*
- * Return values for the 'vm86()' system call
- */
-#define VM86_TYPE(retval)	((retval) & 0xff)
-#define VM86_ARG(retval)	((retval) >> 8)
-
-#define VM86_SIGNAL	0	/* return due to signal */
-#define VM86_UNKNOWN	1	/* unhandled GP fault
-				   - IO-instruction or similar */
-#define VM86_INTx	2	/* int3/int x instruction (ARG = x) */
-#define VM86_STI	3	/* sti/popf/iret instruction enabled
-				   virtual interrupts */
-
-/*
- * Additional return values when invoking new vm86()
- */
-#define VM86_PICRETURN	4	/* return due to pending PIC request */
-#define VM86_TRAP	6	/* return due to DOS-debugger request */
-
-/*
- * function codes when invoking new vm86()
- */
-#define VM86_PLUS_INSTALL_CHECK	0
-#define VM86_ENTER		1
-#define VM86_ENTER_NO_BYPASS	2
-#define	VM86_REQUEST_IRQ	3
-#define VM86_FREE_IRQ		4
-#define VM86_GET_IRQ_BITS	5
-#define VM86_GET_AND_RESET_IRQ	6
-
-/*
- * This is the stack-layout seen by the user space program when we have
- * done a translation of "SAVE_ALL" from vm86 mode. The real kernel layout
- * is 'kernel_vm86_regs' (see below).
- */
-
-struct vm86_regs {
-/*
- * normal regs, with special meaning for the segment descriptors..
- */
-	long ebx;
-	long ecx;
-	long edx;
-	long esi;
-	long edi;
-	long ebp;
-	long eax;
-	long __null_ds;
-	long __null_es;
-	long __null_fs;
-	long __null_gs;
-	long orig_eax;
-	long eip;
-	unsigned short cs, __csh;
-	long eflags;
-	long esp;
-	unsigned short ss, __ssh;
-/*
- * these are specific to v86 mode:
- */
-	unsigned short es, __esh;
-	unsigned short ds, __dsh;
-	unsigned short fs, __fsh;
-	unsigned short gs, __gsh;
-};
-
-struct revectored_struct {
-	unsigned long __map[8];			/* 256 bits */
-};
-
-struct vm86_struct {
-	struct vm86_regs regs;
-	unsigned long flags;
-	unsigned long screen_bitmap;
-	unsigned long cpu_type;
-	struct revectored_struct int_revectored;
-	struct revectored_struct int21_revectored;
-};
-
-/*
- * flags masks
- */
-#define VM86_SCREEN_BITMAP	0x0001
-
-struct vm86plus_info_struct {
-	unsigned long force_return_for_pic:1;
-	unsigned long vm86dbg_active:1;       /* for debugger */
-	unsigned long vm86dbg_TFpendig:1;     /* for debugger */
-	unsigned long unused:28;
-	unsigned long is_vm86pus:1;	      /* for vm86 internal use */
-	unsigned char vm86dbg_intxxtab[32];   /* for debugger */
-};
-struct vm86plus_struct {
-	struct vm86_regs regs;
-	unsigned long flags;
-	unsigned long screen_bitmap;
-	unsigned long cpu_type;
-	struct revectored_struct int_revectored;
-	struct revectored_struct int21_revectored;
-	struct vm86plus_info_struct vm86plus;
-};
-
-#ifdef __KERNEL__
-
-#include <asm/ptrace.h>
-
-/*
- * This is the (kernel) stack-layout when we have done a "SAVE_ALL" from vm86
- * mode - the main change is that the old segment descriptors aren't
- * useful any more and are forced to be zero by the kernel (and the
- * hardware when a trap occurs), and the real segment descriptors are
- * at the end of the structure. Look at ptrace.h to see the "normal"
- * setup. For user space layout see 'struct vm86_regs' above.
- */
-
-struct kernel_vm86_regs {
-/*
- * normal regs, with special meaning for the segment descriptors..
- */
-	struct pt_regs pt;
-/*
- * these are specific to v86 mode:
- */
-	unsigned short es, __esh;
-	unsigned short ds, __dsh;
-	unsigned short fs, __fsh;
-	unsigned short gs, __gsh;
-};
-
-struct kernel_vm86_struct {
-	struct kernel_vm86_regs regs;
-/*
- * the below part remains on the kernel stack while we are in VM86 mode.
- * 'tss.esp0' then contains the address of VM86_TSS_ESP0 below, and when we
- * get forced back from VM86, the CPU and "SAVE_ALL" will restore the above
- * 'struct kernel_vm86_regs' with the then actual values.
- * Therefore, pt_regs in fact points to a complete 'kernel_vm86_struct'
- * in kernelspace, hence we need not reget the data from userspace.
- */
-#define VM86_TSS_ESP0 flags
-	unsigned long flags;
-	unsigned long screen_bitmap;
-	unsigned long cpu_type;
-	struct revectored_struct int_revectored;
-	struct revectored_struct int21_revectored;
-	struct vm86plus_info_struct vm86plus;
-	struct pt_regs *regs32;   /* here we save the pointer to the old regs */
-/*
- * The below is not part of the structure, but the stack layout continues
- * this way. In front of 'return-eip' may be some data, depending on
- * compilation, so we don't rely on this and save the pointer to 'oldregs'
- * in 'regs32' above.
- * However, with GCC-2.7.2 and the current CFLAGS you see exactly this:
-
-	long return-eip;        from call to vm86()
-	struct pt_regs oldregs;  user space registers as saved by syscall
- */
-};
-
-#ifdef CONFIG_VM86
-
-void handle_vm86_fault(struct kernel_vm86_regs *, long);
-int handle_vm86_trap(struct kernel_vm86_regs *, long, int);
-struct pt_regs *save_v86_state(struct kernel_vm86_regs *);
-
-struct task_struct;
-void release_vm86_irqs(struct task_struct *);
-
-#else
-
-#define handle_vm86_fault(a, b)
-#define release_vm86_irqs(a)
-
-static inline int handle_vm86_trap(struct kernel_vm86_regs *a, long b, int c)
-{
-	return 0;
-}
-
-#endif /* CONFIG_VM86 */
-
-#endif /* __KERNEL__ */
-
-#endif /* ASM_X86__VM86_H */
diff --git a/include/asm-x86/vmi_time.h b/include/asm-x86/vmi_time.h
deleted file mode 100644
index b2d39e6..0000000
--- a/include/asm-x86/vmi_time.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * VMI Time wrappers
- *
- * Copyright (C) 2006, VMware, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to dhecht@vmware.com
- *
- */
-
-#ifndef ASM_X86__VMI_TIME_H
-#define ASM_X86__VMI_TIME_H
-
-/*
- * Raw VMI call indices for timer functions
- */
-#define VMI_CALL_GetCycleFrequency	66
-#define VMI_CALL_GetCycleCounter	67
-#define VMI_CALL_SetAlarm		68
-#define VMI_CALL_CancelAlarm		69
-#define VMI_CALL_GetWallclockTime	70
-#define VMI_CALL_WallclockUpdated	71
-
-/* Cached VMI timer operations */
-extern struct vmi_timer_ops {
-	u64 (*get_cycle_frequency)(void);
-	u64 (*get_cycle_counter)(int);
-	u64 (*get_wallclock)(void);
-	int (*wallclock_updated)(void);
-	void (*set_alarm)(u32 flags, u64 expiry, u64 period);
-	void (*cancel_alarm)(u32 flags);
-} vmi_timer_ops;
-
-/* Prototypes */
-extern void __init vmi_time_init(void);
-extern unsigned long vmi_get_wallclock(void);
-extern int vmi_set_wallclock(unsigned long now);
-extern unsigned long long vmi_sched_clock(void);
-extern unsigned long vmi_tsc_khz(void);
-
-#ifdef CONFIG_X86_LOCAL_APIC
-extern void __devinit vmi_time_bsp_init(void);
-extern void __devinit vmi_time_ap_init(void);
-#endif
-
-/*
- * When run under a hypervisor, a vcpu is always in one of three states:
- * running, halted, or ready.  The vcpu is in the 'running' state if it
- * is executing.  When the vcpu executes the halt interface, the vcpu
- * enters the 'halted' state and remains halted until there is some work
- * pending for the vcpu (e.g. an alarm expires, host I/O completes on
- * behalf of virtual I/O).  At this point, the vcpu enters the 'ready'
- * state (waiting for the hypervisor to reschedule it).  Finally, at any
- * time when the vcpu is not in the 'running' state nor the 'halted'
- * state, it is in the 'ready' state.
- *
- * Real time is advances while the vcpu is 'running', 'ready', or
- * 'halted'.  Stolen time is the time in which the vcpu is in the
- * 'ready' state.  Available time is the remaining time -- the vcpu is
- * either 'running' or 'halted'.
- *
- * All three views of time are accessible through the VMI cycle
- * counters.
- */
-
-/* The cycle counters. */
-#define VMI_CYCLES_REAL         0
-#define VMI_CYCLES_AVAILABLE    1
-#define VMI_CYCLES_STOLEN       2
-
-/* The alarm interface 'flags' bits */
-#define VMI_ALARM_COUNTERS      2
-
-#define VMI_ALARM_COUNTER_MASK  0x000000ff
-
-#define VMI_ALARM_WIRED_IRQ0    0x00000000
-#define VMI_ALARM_WIRED_LVTT    0x00010000
-
-#define VMI_ALARM_IS_ONESHOT    0x00000000
-#define VMI_ALARM_IS_PERIODIC   0x00000100
-
-#define CONFIG_VMI_ALARM_HZ	100
-
-#endif /* ASM_X86__VMI_TIME_H */
diff --git a/include/asm-x86/vsyscall.h b/include/asm-x86/vsyscall.h
deleted file mode 100644
index dcd4682..0000000
--- a/include/asm-x86/vsyscall.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef ASM_X86__VSYSCALL_H
-#define ASM_X86__VSYSCALL_H
-
-enum vsyscall_num {
-	__NR_vgettimeofday,
-	__NR_vtime,
-	__NR_vgetcpu,
-};
-
-#define VSYSCALL_START (-10UL << 20)
-#define VSYSCALL_SIZE 1024
-#define VSYSCALL_END (-2UL << 20)
-#define VSYSCALL_MAPPED_PAGES 1
-#define VSYSCALL_ADDR(vsyscall_nr) (VSYSCALL_START+VSYSCALL_SIZE*(vsyscall_nr))
-
-#ifdef __KERNEL__
-#include <linux/seqlock.h>
-
-#define __section_vgetcpu_mode __attribute__ ((unused, __section__ (".vgetcpu_mode"), aligned(16)))
-#define __section_jiffies __attribute__ ((unused, __section__ (".jiffies"), aligned(16)))
-
-/* Definitions for CONFIG_GENERIC_TIME definitions */
-#define __section_vsyscall_gtod_data __attribute__ \
-	((unused, __section__ (".vsyscall_gtod_data"),aligned(16)))
-#define __section_vsyscall_clock __attribute__ \
-	((unused, __section__ (".vsyscall_clock"),aligned(16)))
-#define __vsyscall_fn \
-	__attribute__ ((unused, __section__(".vsyscall_fn"))) notrace
-
-#define VGETCPU_RDTSCP	1
-#define VGETCPU_LSL	2
-
-extern int __vgetcpu_mode;
-extern volatile unsigned long __jiffies;
-
-/* kernel space (writeable) */
-extern int vgetcpu_mode;
-extern struct timezone sys_tz;
-
-extern void map_vsyscall(void);
-
-#endif /* __KERNEL__ */
-
-#endif /* ASM_X86__VSYSCALL_H */
diff --git a/include/asm-x86/xen/events.h b/include/asm-x86/xen/events.h
deleted file mode 100644
index 8151f5b..0000000
--- a/include/asm-x86/xen/events.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef ASM_X86__XEN__EVENTS_H
-#define ASM_X86__XEN__EVENTS_H
-
-enum ipi_vector {
-	XEN_RESCHEDULE_VECTOR,
-	XEN_CALL_FUNCTION_VECTOR,
-	XEN_CALL_FUNCTION_SINGLE_VECTOR,
-	XEN_SPIN_UNLOCK_VECTOR,
-
-	XEN_NR_IPIS,
-};
-
-static inline int xen_irqs_disabled(struct pt_regs *regs)
-{
-	return raw_irqs_disabled_flags(regs->flags);
-}
-
-static inline void xen_do_IRQ(int irq, struct pt_regs *regs)
-{
-	regs->orig_ax = ~irq;
-	do_IRQ(regs);
-}
-
-#endif /* ASM_X86__XEN__EVENTS_H */
diff --git a/include/asm-x86/xen/grant_table.h b/include/asm-x86/xen/grant_table.h
deleted file mode 100644
index c4baab4..0000000
--- a/include/asm-x86/xen/grant_table.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef ASM_X86__XEN__GRANT_TABLE_H
-#define ASM_X86__XEN__GRANT_TABLE_H
-
-#define xen_alloc_vm_area(size)	alloc_vm_area(size)
-#define xen_free_vm_area(area)	free_vm_area(area)
-
-#endif /* ASM_X86__XEN__GRANT_TABLE_H */
diff --git a/include/asm-x86/xen/hypercall.h b/include/asm-x86/xen/hypercall.h
deleted file mode 100644
index 44f4259..0000000
--- a/include/asm-x86/xen/hypercall.h
+++ /dev/null
@@ -1,527 +0,0 @@
-/******************************************************************************
- * hypercall.h
- *
- * Linux-specific hypervisor handling.
- *
- * Copyright (c) 2002-2004, K A Fraser
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation; or, when distributed
- * separately from the Linux kernel or incorporated into other
- * software packages, subject to the following license:
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this source file (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use, copy, modify,
- * merge, publish, distribute, sublicense, and/or sell copies of the Software,
- * and to permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
- * IN THE SOFTWARE.
- */
-
-#ifndef ASM_X86__XEN__HYPERCALL_H
-#define ASM_X86__XEN__HYPERCALL_H
-
-#include <linux/errno.h>
-#include <linux/string.h>
-
-#include <xen/interface/xen.h>
-#include <xen/interface/sched.h>
-#include <xen/interface/physdev.h>
-
-/*
- * The hypercall asms have to meet several constraints:
- * - Work on 32- and 64-bit.
- *    The two architectures put their arguments in different sets of
- *    registers.
- *
- * - Work around asm syntax quirks
- *    It isn't possible to specify one of the rNN registers in a
- *    constraint, so we use explicit register variables to get the
- *    args into the right place.
- *
- * - Mark all registers as potentially clobbered
- *    Even unused parameters can be clobbered by the hypervisor, so we
- *    need to make sure gcc knows it.
- *
- * - Avoid compiler bugs.
- *    This is the tricky part.  Because x86_32 has such a constrained
- *    register set, gcc versions below 4.3 have trouble generating
- *    code when all the arg registers and memory are trashed by the
- *    asm.  There are syntactically simpler ways of achieving the
- *    semantics below, but they cause the compiler to crash.
- *
- *    The only combination I found which works is:
- *     - assign the __argX variables first
- *     - list all actually used parameters as "+r" (__argX)
- *     - clobber the rest
- *
- * The result certainly isn't pretty, and it really shows up cpp's
- * weakness as as macro language.  Sorry.  (But let's just give thanks
- * there aren't more than 5 arguments...)
- */
-
-extern struct { char _entry[32]; } hypercall_page[];
-
-#define __HYPERCALL		"call hypercall_page+%c[offset]"
-#define __HYPERCALL_ENTRY(x)						\
-	[offset] "i" (__HYPERVISOR_##x * sizeof(hypercall_page[0]))
-
-#ifdef CONFIG_X86_32
-#define __HYPERCALL_RETREG	"eax"
-#define __HYPERCALL_ARG1REG	"ebx"
-#define __HYPERCALL_ARG2REG	"ecx"
-#define __HYPERCALL_ARG3REG	"edx"
-#define __HYPERCALL_ARG4REG	"esi"
-#define __HYPERCALL_ARG5REG	"edi"
-#else
-#define __HYPERCALL_RETREG	"rax"
-#define __HYPERCALL_ARG1REG	"rdi"
-#define __HYPERCALL_ARG2REG	"rsi"
-#define __HYPERCALL_ARG3REG	"rdx"
-#define __HYPERCALL_ARG4REG	"r10"
-#define __HYPERCALL_ARG5REG	"r8"
-#endif
-
-#define __HYPERCALL_DECLS						\
-	register unsigned long __res  asm(__HYPERCALL_RETREG);		\
-	register unsigned long __arg1 asm(__HYPERCALL_ARG1REG) = __arg1; \
-	register unsigned long __arg2 asm(__HYPERCALL_ARG2REG) = __arg2; \
-	register unsigned long __arg3 asm(__HYPERCALL_ARG3REG) = __arg3; \
-	register unsigned long __arg4 asm(__HYPERCALL_ARG4REG) = __arg4; \
-	register unsigned long __arg5 asm(__HYPERCALL_ARG5REG) = __arg5;
-
-#define __HYPERCALL_0PARAM	"=r" (__res)
-#define __HYPERCALL_1PARAM	__HYPERCALL_0PARAM, "+r" (__arg1)
-#define __HYPERCALL_2PARAM	__HYPERCALL_1PARAM, "+r" (__arg2)
-#define __HYPERCALL_3PARAM	__HYPERCALL_2PARAM, "+r" (__arg3)
-#define __HYPERCALL_4PARAM	__HYPERCALL_3PARAM, "+r" (__arg4)
-#define __HYPERCALL_5PARAM	__HYPERCALL_4PARAM, "+r" (__arg5)
-
-#define __HYPERCALL_0ARG()
-#define __HYPERCALL_1ARG(a1)						\
-	__HYPERCALL_0ARG()		__arg1 = (unsigned long)(a1);
-#define __HYPERCALL_2ARG(a1,a2)						\
-	__HYPERCALL_1ARG(a1)		__arg2 = (unsigned long)(a2);
-#define __HYPERCALL_3ARG(a1,a2,a3)					\
-	__HYPERCALL_2ARG(a1,a2)		__arg3 = (unsigned long)(a3);
-#define __HYPERCALL_4ARG(a1,a2,a3,a4)					\
-	__HYPERCALL_3ARG(a1,a2,a3)	__arg4 = (unsigned long)(a4);
-#define __HYPERCALL_5ARG(a1,a2,a3,a4,a5)				\
-	__HYPERCALL_4ARG(a1,a2,a3,a4)	__arg5 = (unsigned long)(a5);
-
-#define __HYPERCALL_CLOBBER5	"memory"
-#define __HYPERCALL_CLOBBER4	__HYPERCALL_CLOBBER5, __HYPERCALL_ARG5REG
-#define __HYPERCALL_CLOBBER3	__HYPERCALL_CLOBBER4, __HYPERCALL_ARG4REG
-#define __HYPERCALL_CLOBBER2	__HYPERCALL_CLOBBER3, __HYPERCALL_ARG3REG
-#define __HYPERCALL_CLOBBER1	__HYPERCALL_CLOBBER2, __HYPERCALL_ARG2REG
-#define __HYPERCALL_CLOBBER0	__HYPERCALL_CLOBBER1, __HYPERCALL_ARG1REG
-
-#define _hypercall0(type, name)						\
-({									\
-	__HYPERCALL_DECLS;						\
-	__HYPERCALL_0ARG();						\
-	asm volatile (__HYPERCALL					\
-		      : __HYPERCALL_0PARAM				\
-		      : __HYPERCALL_ENTRY(name)				\
-		      : __HYPERCALL_CLOBBER0);				\
-	(type)__res;							\
-})
-
-#define _hypercall1(type, name, a1)					\
-({									\
-	__HYPERCALL_DECLS;						\
-	__HYPERCALL_1ARG(a1);						\
-	asm volatile (__HYPERCALL					\
-		      : __HYPERCALL_1PARAM				\
-		      : __HYPERCALL_ENTRY(name)				\
-		      : __HYPERCALL_CLOBBER1);				\
-	(type)__res;							\
-})
-
-#define _hypercall2(type, name, a1, a2)					\
-({									\
-	__HYPERCALL_DECLS;						\
-	__HYPERCALL_2ARG(a1, a2);					\
-	asm volatile (__HYPERCALL					\
-		      : __HYPERCALL_2PARAM				\
-		      : __HYPERCALL_ENTRY(name)				\
-		      : __HYPERCALL_CLOBBER2);				\
-	(type)__res;							\
-})
-
-#define _hypercall3(type, name, a1, a2, a3)				\
-({									\
-	__HYPERCALL_DECLS;						\
-	__HYPERCALL_3ARG(a1, a2, a3);					\
-	asm volatile (__HYPERCALL					\
-		      : __HYPERCALL_3PARAM				\
-		      : __HYPERCALL_ENTRY(name)				\
-		      : __HYPERCALL_CLOBBER3);				\
-	(type)__res;							\
-})
-
-#define _hypercall4(type, name, a1, a2, a3, a4)				\
-({									\
-	__HYPERCALL_DECLS;						\
-	__HYPERCALL_4ARG(a1, a2, a3, a4);				\
-	asm volatile (__HYPERCALL					\
-		      : __HYPERCALL_4PARAM				\
-		      : __HYPERCALL_ENTRY(name)				\
-		      : __HYPERCALL_CLOBBER4);				\
-	(type)__res;							\
-})
-
-#define _hypercall5(type, name, a1, a2, a3, a4, a5)			\
-({									\
-	__HYPERCALL_DECLS;						\
-	__HYPERCALL_5ARG(a1, a2, a3, a4, a5);				\
-	asm volatile (__HYPERCALL					\
-		      : __HYPERCALL_5PARAM				\
-		      : __HYPERCALL_ENTRY(name)				\
-		      : __HYPERCALL_CLOBBER5);				\
-	(type)__res;							\
-})
-
-static inline int
-HYPERVISOR_set_trap_table(struct trap_info *table)
-{
-	return _hypercall1(int, set_trap_table, table);
-}
-
-static inline int
-HYPERVISOR_mmu_update(struct mmu_update *req, int count,
-		      int *success_count, domid_t domid)
-{
-	return _hypercall4(int, mmu_update, req, count, success_count, domid);
-}
-
-static inline int
-HYPERVISOR_mmuext_op(struct mmuext_op *op, int count,
-		     int *success_count, domid_t domid)
-{
-	return _hypercall4(int, mmuext_op, op, count, success_count, domid);
-}
-
-static inline int
-HYPERVISOR_set_gdt(unsigned long *frame_list, int entries)
-{
-	return _hypercall2(int, set_gdt, frame_list, entries);
-}
-
-static inline int
-HYPERVISOR_stack_switch(unsigned long ss, unsigned long esp)
-{
-	return _hypercall2(int, stack_switch, ss, esp);
-}
-
-#ifdef CONFIG_X86_32
-static inline int
-HYPERVISOR_set_callbacks(unsigned long event_selector,
-			 unsigned long event_address,
-			 unsigned long failsafe_selector,
-			 unsigned long failsafe_address)
-{
-	return _hypercall4(int, set_callbacks,
-			   event_selector, event_address,
-			   failsafe_selector, failsafe_address);
-}
-#else  /* CONFIG_X86_64 */
-static inline int
-HYPERVISOR_set_callbacks(unsigned long event_address,
-			unsigned long failsafe_address,
-			unsigned long syscall_address)
-{
-	return _hypercall3(int, set_callbacks,
-			   event_address, failsafe_address,
-			   syscall_address);
-}
-#endif  /* CONFIG_X86_{32,64} */
-
-static inline int
-HYPERVISOR_callback_op(int cmd, void *arg)
-{
-	return _hypercall2(int, callback_op, cmd, arg);
-}
-
-static inline int
-HYPERVISOR_fpu_taskswitch(int set)
-{
-	return _hypercall1(int, fpu_taskswitch, set);
-}
-
-static inline int
-HYPERVISOR_sched_op(int cmd, void *arg)
-{
-	return _hypercall2(int, sched_op_new, cmd, arg);
-}
-
-static inline long
-HYPERVISOR_set_timer_op(u64 timeout)
-{
-	unsigned long timeout_hi = (unsigned long)(timeout>>32);
-	unsigned long timeout_lo = (unsigned long)timeout;
-	return _hypercall2(long, set_timer_op, timeout_lo, timeout_hi);
-}
-
-static inline int
-HYPERVISOR_set_debugreg(int reg, unsigned long value)
-{
-	return _hypercall2(int, set_debugreg, reg, value);
-}
-
-static inline unsigned long
-HYPERVISOR_get_debugreg(int reg)
-{
-	return _hypercall1(unsigned long, get_debugreg, reg);
-}
-
-static inline int
-HYPERVISOR_update_descriptor(u64 ma, u64 desc)
-{
-	return _hypercall4(int, update_descriptor, ma, ma>>32, desc, desc>>32);
-}
-
-static inline int
-HYPERVISOR_memory_op(unsigned int cmd, void *arg)
-{
-	return _hypercall2(int, memory_op, cmd, arg);
-}
-
-static inline int
-HYPERVISOR_multicall(void *call_list, int nr_calls)
-{
-	return _hypercall2(int, multicall, call_list, nr_calls);
-}
-
-static inline int
-HYPERVISOR_update_va_mapping(unsigned long va, pte_t new_val,
-			     unsigned long flags)
-{
-	if (sizeof(new_val) == sizeof(long))
-		return _hypercall3(int, update_va_mapping, va,
-				   new_val.pte, flags);
-	else
-		return _hypercall4(int, update_va_mapping, va,
-				   new_val.pte, new_val.pte >> 32, flags);
-}
-
-static inline int
-HYPERVISOR_event_channel_op(int cmd, void *arg)
-{
-	int rc = _hypercall2(int, event_channel_op, cmd, arg);
-	if (unlikely(rc == -ENOSYS)) {
-		struct evtchn_op op;
-		op.cmd = cmd;
-		memcpy(&op.u, arg, sizeof(op.u));
-		rc = _hypercall1(int, event_channel_op_compat, &op);
-		memcpy(arg, &op.u, sizeof(op.u));
-	}
-	return rc;
-}
-
-static inline int
-HYPERVISOR_xen_version(int cmd, void *arg)
-{
-	return _hypercall2(int, xen_version, cmd, arg);
-}
-
-static inline int
-HYPERVISOR_console_io(int cmd, int count, char *str)
-{
-	return _hypercall3(int, console_io, cmd, count, str);
-}
-
-static inline int
-HYPERVISOR_physdev_op(int cmd, void *arg)
-{
-	int rc = _hypercall2(int, physdev_op, cmd, arg);
-	if (unlikely(rc == -ENOSYS)) {
-		struct physdev_op op;
-		op.cmd = cmd;
-		memcpy(&op.u, arg, sizeof(op.u));
-		rc = _hypercall1(int, physdev_op_compat, &op);
-		memcpy(arg, &op.u, sizeof(op.u));
-	}
-	return rc;
-}
-
-static inline int
-HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count)
-{
-	return _hypercall3(int, grant_table_op, cmd, uop, count);
-}
-
-static inline int
-HYPERVISOR_update_va_mapping_otherdomain(unsigned long va, pte_t new_val,
-					 unsigned long flags, domid_t domid)
-{
-	if (sizeof(new_val) == sizeof(long))
-		return _hypercall4(int, update_va_mapping_otherdomain, va,
-				   new_val.pte, flags, domid);
-	else
-		return _hypercall5(int, update_va_mapping_otherdomain, va,
-				   new_val.pte, new_val.pte >> 32,
-				   flags, domid);
-}
-
-static inline int
-HYPERVISOR_vm_assist(unsigned int cmd, unsigned int type)
-{
-	return _hypercall2(int, vm_assist, cmd, type);
-}
-
-static inline int
-HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args)
-{
-	return _hypercall3(int, vcpu_op, cmd, vcpuid, extra_args);
-}
-
-#ifdef CONFIG_X86_64
-static inline int
-HYPERVISOR_set_segment_base(int reg, unsigned long value)
-{
-	return _hypercall2(int, set_segment_base, reg, value);
-}
-#endif
-
-static inline int
-HYPERVISOR_suspend(unsigned long srec)
-{
-	return _hypercall3(int, sched_op, SCHEDOP_shutdown,
-			   SHUTDOWN_suspend, srec);
-}
-
-static inline int
-HYPERVISOR_nmi_op(unsigned long op, unsigned long arg)
-{
-	return _hypercall2(int, nmi_op, op, arg);
-}
-
-static inline void
-MULTI_fpu_taskswitch(struct multicall_entry *mcl, int set)
-{
-	mcl->op = __HYPERVISOR_fpu_taskswitch;
-	mcl->args[0] = set;
-}
-
-static inline void
-MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va,
-			pte_t new_val, unsigned long flags)
-{
-	mcl->op = __HYPERVISOR_update_va_mapping;
-	mcl->args[0] = va;
-	if (sizeof(new_val) == sizeof(long)) {
-		mcl->args[1] = new_val.pte;
-		mcl->args[2] = flags;
-	} else {
-		mcl->args[1] = new_val.pte;
-		mcl->args[2] = new_val.pte >> 32;
-		mcl->args[3] = flags;
-	}
-}
-
-static inline void
-MULTI_grant_table_op(struct multicall_entry *mcl, unsigned int cmd,
-		     void *uop, unsigned int count)
-{
-	mcl->op = __HYPERVISOR_grant_table_op;
-	mcl->args[0] = cmd;
-	mcl->args[1] = (unsigned long)uop;
-	mcl->args[2] = count;
-}
-
-static inline void
-MULTI_update_va_mapping_otherdomain(struct multicall_entry *mcl, unsigned long va,
-				    pte_t new_val, unsigned long flags,
-				    domid_t domid)
-{
-	mcl->op = __HYPERVISOR_update_va_mapping_otherdomain;
-	mcl->args[0] = va;
-	if (sizeof(new_val) == sizeof(long)) {
-		mcl->args[1] = new_val.pte;
-		mcl->args[2] = flags;
-		mcl->args[3] = domid;
-	} else {
-		mcl->args[1] = new_val.pte;
-		mcl->args[2] = new_val.pte >> 32;
-		mcl->args[3] = flags;
-		mcl->args[4] = domid;
-	}
-}
-
-static inline void
-MULTI_update_descriptor(struct multicall_entry *mcl, u64 maddr,
-			struct desc_struct desc)
-{
-	mcl->op = __HYPERVISOR_update_descriptor;
-	if (sizeof(maddr) == sizeof(long)) {
-		mcl->args[0] = maddr;
-		mcl->args[1] = *(unsigned long *)&desc;
-	} else {
-		mcl->args[0] = maddr;
-		mcl->args[1] = maddr >> 32;
-		mcl->args[2] = desc.a;
-		mcl->args[3] = desc.b;
-	}
-}
-
-static inline void
-MULTI_memory_op(struct multicall_entry *mcl, unsigned int cmd, void *arg)
-{
-	mcl->op = __HYPERVISOR_memory_op;
-	mcl->args[0] = cmd;
-	mcl->args[1] = (unsigned long)arg;
-}
-
-static inline void
-MULTI_mmu_update(struct multicall_entry *mcl, struct mmu_update *req,
-		 int count, int *success_count, domid_t domid)
-{
-	mcl->op = __HYPERVISOR_mmu_update;
-	mcl->args[0] = (unsigned long)req;
-	mcl->args[1] = count;
-	mcl->args[2] = (unsigned long)success_count;
-	mcl->args[3] = domid;
-}
-
-static inline void
-MULTI_mmuext_op(struct multicall_entry *mcl, struct mmuext_op *op, int count,
-		int *success_count, domid_t domid)
-{
-	mcl->op = __HYPERVISOR_mmuext_op;
-	mcl->args[0] = (unsigned long)op;
-	mcl->args[1] = count;
-	mcl->args[2] = (unsigned long)success_count;
-	mcl->args[3] = domid;
-}
-
-static inline void
-MULTI_set_gdt(struct multicall_entry *mcl, unsigned long *frames, int entries)
-{
-	mcl->op = __HYPERVISOR_set_gdt;
-	mcl->args[0] = (unsigned long)frames;
-	mcl->args[1] = entries;
-}
-
-static inline void
-MULTI_stack_switch(struct multicall_entry *mcl,
-		   unsigned long ss, unsigned long esp)
-{
-	mcl->op = __HYPERVISOR_stack_switch;
-	mcl->args[0] = ss;
-	mcl->args[1] = esp;
-}
-
-#endif /* ASM_X86__XEN__HYPERCALL_H */
diff --git a/include/asm-x86/xen/hypervisor.h b/include/asm-x86/xen/hypervisor.h
deleted file mode 100644
index 445a247..0000000
--- a/include/asm-x86/xen/hypervisor.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/******************************************************************************
- * hypervisor.h
- *
- * Linux-specific hypervisor handling.
- *
- * Copyright (c) 2002-2004, K A Fraser
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation; or, when distributed
- * separately from the Linux kernel or incorporated into other
- * software packages, subject to the following license:
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this source file (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use, copy, modify,
- * merge, publish, distribute, sublicense, and/or sell copies of the Software,
- * and to permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
- * IN THE SOFTWARE.
- */
-
-#ifndef ASM_X86__XEN__HYPERVISOR_H
-#define ASM_X86__XEN__HYPERVISOR_H
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <xen/interface/xen.h>
-#include <xen/interface/version.h>
-
-#include <asm/ptrace.h>
-#include <asm/page.h>
-#include <asm/desc.h>
-#if defined(__i386__)
-#  ifdef CONFIG_X86_PAE
-#   include <asm-generic/pgtable-nopud.h>
-#  else
-#   include <asm-generic/pgtable-nopmd.h>
-#  endif
-#endif
-#include <asm/xen/hypercall.h>
-
-/* arch/i386/kernel/setup.c */
-extern struct shared_info *HYPERVISOR_shared_info;
-extern struct start_info *xen_start_info;
-
-/* arch/i386/mach-xen/evtchn.c */
-/* Force a proper event-channel callback from Xen. */
-extern void force_evtchn_callback(void);
-
-/* Turn jiffies into Xen system time. */
-u64 jiffies_to_st(unsigned long jiffies);
-
-
-#define MULTI_UVMFLAGS_INDEX 3
-#define MULTI_UVMDOMID_INDEX 4
-
-enum xen_domain_type {
-	XEN_NATIVE,
-	XEN_PV_DOMAIN,
-	XEN_HVM_DOMAIN,
-};
-
-extern enum xen_domain_type xen_domain_type;
-
-#define xen_domain()		(xen_domain_type != XEN_NATIVE)
-#define xen_pv_domain()		(xen_domain_type == XEN_PV_DOMAIN)
-#define xen_initial_domain()	(xen_pv_domain() && xen_start_info->flags & SIF_INITDOMAIN)
-#define xen_hvm_domain()	(xen_domain_type == XEN_HVM_DOMAIN)
-
-#endif /* ASM_X86__XEN__HYPERVISOR_H */
diff --git a/include/asm-x86/xen/interface.h b/include/asm-x86/xen/interface.h
deleted file mode 100644
index d077bba..0000000
--- a/include/asm-x86/xen/interface.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/******************************************************************************
- * arch-x86_32.h
- *
- * Guest OS interface to x86 Xen.
- *
- * Copyright (c) 2004, K A Fraser
- */
-
-#ifndef ASM_X86__XEN__INTERFACE_H
-#define ASM_X86__XEN__INTERFACE_H
-
-#ifdef __XEN__
-#define __DEFINE_GUEST_HANDLE(name, type) \
-    typedef struct { type *p; } __guest_handle_ ## name
-#else
-#define __DEFINE_GUEST_HANDLE(name, type) \
-    typedef type * __guest_handle_ ## name
-#endif
-
-#define DEFINE_GUEST_HANDLE_STRUCT(name) \
-	__DEFINE_GUEST_HANDLE(name, struct name)
-#define DEFINE_GUEST_HANDLE(name) __DEFINE_GUEST_HANDLE(name, name)
-#define GUEST_HANDLE(name)        __guest_handle_ ## name
-
-#ifdef __XEN__
-#if defined(__i386__)
-#define set_xen_guest_handle(hnd, val)			\
-	do {						\
-		if (sizeof(hnd) == 8)			\
-			*(uint64_t *)&(hnd) = 0;	\
-		(hnd).p = val;				\
-	} while (0)
-#elif defined(__x86_64__)
-#define set_xen_guest_handle(hnd, val)	do { (hnd).p = val; } while (0)
-#endif
-#else
-#if defined(__i386__)
-#define set_xen_guest_handle(hnd, val)			\
-	do {						\
-		if (sizeof(hnd) == 8)			\
-			*(uint64_t *)&(hnd) = 0;	\
-		(hnd) = val;				\
-	} while (0)
-#elif defined(__x86_64__)
-#define set_xen_guest_handle(hnd, val)	do { (hnd) = val; } while (0)
-#endif
-#endif
-
-#ifndef __ASSEMBLY__
-/* Guest handles for primitive C types. */
-__DEFINE_GUEST_HANDLE(uchar, unsigned char);
-__DEFINE_GUEST_HANDLE(uint,  unsigned int);
-__DEFINE_GUEST_HANDLE(ulong, unsigned long);
-DEFINE_GUEST_HANDLE(char);
-DEFINE_GUEST_HANDLE(int);
-DEFINE_GUEST_HANDLE(long);
-DEFINE_GUEST_HANDLE(void);
-#endif
-
-#ifndef HYPERVISOR_VIRT_START
-#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
-#endif
-
-#ifndef machine_to_phys_mapping
-#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
-#endif
-
-/* Maximum number of virtual CPUs in multi-processor guests. */
-#define MAX_VIRT_CPUS 32
-
-/*
- * SEGMENT DESCRIPTOR TABLES
- */
-/*
- * A number of GDT entries are reserved by Xen. These are not situated at the
- * start of the GDT because some stupid OSes export hard-coded selector values
- * in their ABI. These hard-coded values are always near the start of the GDT,
- * so Xen places itself out of the way, at the far end of the GDT.
- */
-#define FIRST_RESERVED_GDT_PAGE  14
-#define FIRST_RESERVED_GDT_BYTE  (FIRST_RESERVED_GDT_PAGE * 4096)
-#define FIRST_RESERVED_GDT_ENTRY (FIRST_RESERVED_GDT_BYTE / 8)
-
-/*
- * Send an array of these to HYPERVISOR_set_trap_table()
- * The privilege level specifies which modes may enter a trap via a software
- * interrupt. On x86/64, since rings 1 and 2 are unavailable, we allocate
- * privilege levels as follows:
- *  Level == 0: Noone may enter
- *  Level == 1: Kernel may enter
- *  Level == 2: Kernel may enter
- *  Level == 3: Everyone may enter
- */
-#define TI_GET_DPL(_ti)		((_ti)->flags & 3)
-#define TI_GET_IF(_ti)		((_ti)->flags & 4)
-#define TI_SET_DPL(_ti, _dpl)	((_ti)->flags |= (_dpl))
-#define TI_SET_IF(_ti, _if)	((_ti)->flags |= ((!!(_if))<<2))
-
-#ifndef __ASSEMBLY__
-struct trap_info {
-    uint8_t       vector;  /* exception vector                              */
-    uint8_t       flags;   /* 0-3: privilege level; 4: clear event enable?  */
-    uint16_t      cs;      /* code selector                                 */
-    unsigned long address; /* code offset                                   */
-};
-DEFINE_GUEST_HANDLE_STRUCT(trap_info);
-
-struct arch_shared_info {
-    unsigned long max_pfn;                  /* max pfn that appears in table */
-    /* Frame containing list of mfns containing list of mfns containing p2m. */
-    unsigned long pfn_to_mfn_frame_list_list;
-    unsigned long nmi_reason;
-};
-#endif	/* !__ASSEMBLY__ */
-
-#ifdef CONFIG_X86_32
-#include "interface_32.h"
-#else
-#include "interface_64.h"
-#endif
-
-#ifndef __ASSEMBLY__
-/*
- * The following is all CPU context. Note that the fpu_ctxt block is filled
- * in by FXSAVE if the CPU has feature FXSR; otherwise FSAVE is used.
- */
-struct vcpu_guest_context {
-    /* FPU registers come first so they can be aligned for FXSAVE/FXRSTOR. */
-    struct { char x[512]; } fpu_ctxt;       /* User-level FPU registers     */
-#define VGCF_I387_VALID (1<<0)
-#define VGCF_HVM_GUEST  (1<<1)
-#define VGCF_IN_KERNEL  (1<<2)
-    unsigned long flags;                    /* VGCF_* flags                 */
-    struct cpu_user_regs user_regs;         /* User-level CPU registers     */
-    struct trap_info trap_ctxt[256];        /* Virtual IDT                  */
-    unsigned long ldt_base, ldt_ents;       /* LDT (linear address, # ents) */
-    unsigned long gdt_frames[16], gdt_ents; /* GDT (machine frames, # ents) */
-    unsigned long kernel_ss, kernel_sp;     /* Virtual TSS (only SS1/SP1)   */
-    /* NB. User pagetable on x86/64 is placed in ctrlreg[1]. */
-    unsigned long ctrlreg[8];               /* CR0-CR7 (control registers)  */
-    unsigned long debugreg[8];              /* DB0-DB7 (debug registers)    */
-#ifdef __i386__
-    unsigned long event_callback_cs;        /* CS:EIP of event callback     */
-    unsigned long event_callback_eip;
-    unsigned long failsafe_callback_cs;     /* CS:EIP of failsafe callback  */
-    unsigned long failsafe_callback_eip;
-#else
-    unsigned long event_callback_eip;
-    unsigned long failsafe_callback_eip;
-    unsigned long syscall_callback_eip;
-#endif
-    unsigned long vm_assist;                /* VMASST_TYPE_* bitmap */
-#ifdef __x86_64__
-    /* Segment base addresses. */
-    uint64_t      fs_base;
-    uint64_t      gs_base_kernel;
-    uint64_t      gs_base_user;
-#endif
-};
-DEFINE_GUEST_HANDLE_STRUCT(vcpu_guest_context);
-#endif	/* !__ASSEMBLY__ */
-
-/*
- * Prefix forces emulation of some non-trapping instructions.
- * Currently only CPUID.
- */
-#ifdef __ASSEMBLY__
-#define XEN_EMULATE_PREFIX .byte 0x0f,0x0b,0x78,0x65,0x6e ;
-#define XEN_CPUID          XEN_EMULATE_PREFIX cpuid
-#else
-#define XEN_EMULATE_PREFIX ".byte 0x0f,0x0b,0x78,0x65,0x6e ; "
-#define XEN_CPUID          XEN_EMULATE_PREFIX "cpuid"
-#endif
-
-#endif /* ASM_X86__XEN__INTERFACE_H */
diff --git a/include/asm-x86/xen/interface_32.h b/include/asm-x86/xen/interface_32.h
deleted file mode 100644
index 08167e1..0000000
--- a/include/asm-x86/xen/interface_32.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/******************************************************************************
- * arch-x86_32.h
- *
- * Guest OS interface to x86 32-bit Xen.
- *
- * Copyright (c) 2004, K A Fraser
- */
-
-#ifndef ASM_X86__XEN__INTERFACE_32_H
-#define ASM_X86__XEN__INTERFACE_32_H
-
-
-/*
- * These flat segments are in the Xen-private section of every GDT. Since these
- * are also present in the initial GDT, many OSes will be able to avoid
- * installing their own GDT.
- */
-#define FLAT_RING1_CS 0xe019    /* GDT index 259 */
-#define FLAT_RING1_DS 0xe021    /* GDT index 260 */
-#define FLAT_RING1_SS 0xe021    /* GDT index 260 */
-#define FLAT_RING3_CS 0xe02b    /* GDT index 261 */
-#define FLAT_RING3_DS 0xe033    /* GDT index 262 */
-#define FLAT_RING3_SS 0xe033    /* GDT index 262 */
-
-#define FLAT_KERNEL_CS FLAT_RING1_CS
-#define FLAT_KERNEL_DS FLAT_RING1_DS
-#define FLAT_KERNEL_SS FLAT_RING1_SS
-#define FLAT_USER_CS    FLAT_RING3_CS
-#define FLAT_USER_DS    FLAT_RING3_DS
-#define FLAT_USER_SS    FLAT_RING3_SS
-
-/* And the trap vector is... */
-#define TRAP_INSTR "int $0x82"
-
-/*
- * Virtual addresses beyond this are not modifiable by guest OSes. The
- * machine->physical mapping table starts at this address, read-only.
- */
-#define __HYPERVISOR_VIRT_START 0xF5800000
-
-#ifndef __ASSEMBLY__
-
-struct cpu_user_regs {
-    uint32_t ebx;
-    uint32_t ecx;
-    uint32_t edx;
-    uint32_t esi;
-    uint32_t edi;
-    uint32_t ebp;
-    uint32_t eax;
-    uint16_t error_code;    /* private */
-    uint16_t entry_vector;  /* private */
-    uint32_t eip;
-    uint16_t cs;
-    uint8_t  saved_upcall_mask;
-    uint8_t  _pad0;
-    uint32_t eflags;        /* eflags.IF == !saved_upcall_mask */
-    uint32_t esp;
-    uint16_t ss, _pad1;
-    uint16_t es, _pad2;
-    uint16_t ds, _pad3;
-    uint16_t fs, _pad4;
-    uint16_t gs, _pad5;
-};
-DEFINE_GUEST_HANDLE_STRUCT(cpu_user_regs);
-
-typedef uint64_t tsc_timestamp_t; /* RDTSC timestamp */
-
-struct arch_vcpu_info {
-    unsigned long cr2;
-    unsigned long pad[5]; /* sizeof(struct vcpu_info) == 64 */
-};
-
-struct xen_callback {
-	unsigned long cs;
-	unsigned long eip;
-};
-typedef struct xen_callback xen_callback_t;
-
-#define XEN_CALLBACK(__cs, __eip)				\
-	((struct xen_callback){ .cs = (__cs), .eip = (unsigned long)(__eip) })
-#endif /* !__ASSEMBLY__ */
-
-
-/*
- * Page-directory addresses above 4GB do not fit into architectural %cr3.
- * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
- * must use the following accessor macros to pack/unpack valid MFNs.
- *
- * Note that Xen is using the fact that the pagetable base is always
- * page-aligned, and putting the 12 MSB of the address into the 12 LSB
- * of cr3.
- */
-#define xen_pfn_to_cr3(pfn) (((unsigned)(pfn) << 12) | ((unsigned)(pfn) >> 20))
-#define xen_cr3_to_pfn(cr3) (((unsigned)(cr3) >> 12) | ((unsigned)(cr3) << 20))
-
-#endif /* ASM_X86__XEN__INTERFACE_32_H */
diff --git a/include/asm-x86/xen/interface_64.h b/include/asm-x86/xen/interface_64.h
deleted file mode 100644
index 046c0f1..0000000
--- a/include/asm-x86/xen/interface_64.h
+++ /dev/null
@@ -1,159 +0,0 @@
-#ifndef ASM_X86__XEN__INTERFACE_64_H
-#define ASM_X86__XEN__INTERFACE_64_H
-
-/*
- * 64-bit segment selectors
- * These flat segments are in the Xen-private section of every GDT. Since these
- * are also present in the initial GDT, many OSes will be able to avoid
- * installing their own GDT.
- */
-
-#define FLAT_RING3_CS32 0xe023  /* GDT index 260 */
-#define FLAT_RING3_CS64 0xe033  /* GDT index 261 */
-#define FLAT_RING3_DS32 0xe02b  /* GDT index 262 */
-#define FLAT_RING3_DS64 0x0000  /* NULL selector */
-#define FLAT_RING3_SS32 0xe02b  /* GDT index 262 */
-#define FLAT_RING3_SS64 0xe02b  /* GDT index 262 */
-
-#define FLAT_KERNEL_DS64 FLAT_RING3_DS64
-#define FLAT_KERNEL_DS32 FLAT_RING3_DS32
-#define FLAT_KERNEL_DS   FLAT_KERNEL_DS64
-#define FLAT_KERNEL_CS64 FLAT_RING3_CS64
-#define FLAT_KERNEL_CS32 FLAT_RING3_CS32
-#define FLAT_KERNEL_CS   FLAT_KERNEL_CS64
-#define FLAT_KERNEL_SS64 FLAT_RING3_SS64
-#define FLAT_KERNEL_SS32 FLAT_RING3_SS32
-#define FLAT_KERNEL_SS   FLAT_KERNEL_SS64
-
-#define FLAT_USER_DS64 FLAT_RING3_DS64
-#define FLAT_USER_DS32 FLAT_RING3_DS32
-#define FLAT_USER_DS   FLAT_USER_DS64
-#define FLAT_USER_CS64 FLAT_RING3_CS64
-#define FLAT_USER_CS32 FLAT_RING3_CS32
-#define FLAT_USER_CS   FLAT_USER_CS64
-#define FLAT_USER_SS64 FLAT_RING3_SS64
-#define FLAT_USER_SS32 FLAT_RING3_SS32
-#define FLAT_USER_SS   FLAT_USER_SS64
-
-#define __HYPERVISOR_VIRT_START 0xFFFF800000000000
-#define __HYPERVISOR_VIRT_END   0xFFFF880000000000
-#define __MACH2PHYS_VIRT_START  0xFFFF800000000000
-#define __MACH2PHYS_VIRT_END    0xFFFF804000000000
-
-#ifndef HYPERVISOR_VIRT_START
-#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
-#define HYPERVISOR_VIRT_END   mk_unsigned_long(__HYPERVISOR_VIRT_END)
-#endif
-
-#define MACH2PHYS_VIRT_START  mk_unsigned_long(__MACH2PHYS_VIRT_START)
-#define MACH2PHYS_VIRT_END    mk_unsigned_long(__MACH2PHYS_VIRT_END)
-#define MACH2PHYS_NR_ENTRIES  ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>3)
-#ifndef machine_to_phys_mapping
-#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
-#endif
-
-/*
- * int HYPERVISOR_set_segment_base(unsigned int which, unsigned long base)
- *  @which == SEGBASE_*  ;  @base == 64-bit base address
- * Returns 0 on success.
- */
-#define SEGBASE_FS          0
-#define SEGBASE_GS_USER     1
-#define SEGBASE_GS_KERNEL   2
-#define SEGBASE_GS_USER_SEL 3 /* Set user %gs specified in base[15:0] */
-
-/*
- * int HYPERVISOR_iret(void)
- * All arguments are on the kernel stack, in the following format.
- * Never returns if successful. Current kernel context is lost.
- * The saved CS is mapped as follows:
- *   RING0 -> RING3 kernel mode.
- *   RING1 -> RING3 kernel mode.
- *   RING2 -> RING3 kernel mode.
- *   RING3 -> RING3 user mode.
- * However RING0 indicates that the guest kernel should return to iteself
- * directly with
- *      orb   $3,1*8(%rsp)
- *      iretq
- * If flags contains VGCF_in_syscall:
- *   Restore RAX, RIP, RFLAGS, RSP.
- *   Discard R11, RCX, CS, SS.
- * Otherwise:
- *   Restore RAX, R11, RCX, CS:RIP, RFLAGS, SS:RSP.
- * All other registers are saved on hypercall entry and restored to user.
- */
-/* Guest exited in SYSCALL context? Return to guest with SYSRET? */
-#define _VGCF_in_syscall 8
-#define VGCF_in_syscall  (1<<_VGCF_in_syscall)
-#define VGCF_IN_SYSCALL  VGCF_in_syscall
-
-#ifndef __ASSEMBLY__
-
-struct iret_context {
-    /* Top of stack (%rsp at point of hypercall). */
-    uint64_t rax, r11, rcx, flags, rip, cs, rflags, rsp, ss;
-    /* Bottom of iret stack frame. */
-};
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-/* Anonymous union includes both 32- and 64-bit names (e.g., eax/rax). */
-#define __DECL_REG(name) union { \
-    uint64_t r ## name, e ## name; \
-    uint32_t _e ## name; \
-}
-#else
-/* Non-gcc sources must always use the proper 64-bit name (e.g., rax). */
-#define __DECL_REG(name) uint64_t r ## name
-#endif
-
-struct cpu_user_regs {
-    uint64_t r15;
-    uint64_t r14;
-    uint64_t r13;
-    uint64_t r12;
-    __DECL_REG(bp);
-    __DECL_REG(bx);
-    uint64_t r11;
-    uint64_t r10;
-    uint64_t r9;
-    uint64_t r8;
-    __DECL_REG(ax);
-    __DECL_REG(cx);
-    __DECL_REG(dx);
-    __DECL_REG(si);
-    __DECL_REG(di);
-    uint32_t error_code;    /* private */
-    uint32_t entry_vector;  /* private */
-    __DECL_REG(ip);
-    uint16_t cs, _pad0[1];
-    uint8_t  saved_upcall_mask;
-    uint8_t  _pad1[3];
-    __DECL_REG(flags);      /* rflags.IF == !saved_upcall_mask */
-    __DECL_REG(sp);
-    uint16_t ss, _pad2[3];
-    uint16_t es, _pad3[3];
-    uint16_t ds, _pad4[3];
-    uint16_t fs, _pad5[3]; /* Non-zero => takes precedence over fs_base.     */
-    uint16_t gs, _pad6[3]; /* Non-zero => takes precedence over gs_base_usr. */
-};
-DEFINE_GUEST_HANDLE_STRUCT(cpu_user_regs);
-
-#undef __DECL_REG
-
-#define xen_pfn_to_cr3(pfn) ((unsigned long)(pfn) << 12)
-#define xen_cr3_to_pfn(cr3) ((unsigned long)(cr3) >> 12)
-
-struct arch_vcpu_info {
-    unsigned long cr2;
-    unsigned long pad; /* sizeof(vcpu_info_t) == 64 */
-};
-
-typedef unsigned long xen_callback_t;
-
-#define XEN_CALLBACK(__cs, __rip)				\
-	((unsigned long)(__rip))
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* ASM_X86__XEN__INTERFACE_64_H */
diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h
deleted file mode 100644
index d5eada0..0000000
--- a/include/asm-x86/xen/page.h
+++ /dev/null
@@ -1,165 +0,0 @@
-#ifndef ASM_X86__XEN__PAGE_H
-#define ASM_X86__XEN__PAGE_H
-
-#include <linux/pfn.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-
-#include <xen/features.h>
-
-/* Xen machine address */
-typedef struct xmaddr {
-	phys_addr_t maddr;
-} xmaddr_t;
-
-/* Xen pseudo-physical address */
-typedef struct xpaddr {
-	phys_addr_t paddr;
-} xpaddr_t;
-
-#define XMADDR(x)	((xmaddr_t) { .maddr = (x) })
-#define XPADDR(x)	((xpaddr_t) { .paddr = (x) })
-
-/**** MACHINE <-> PHYSICAL CONVERSION MACROS ****/
-#define INVALID_P2M_ENTRY	(~0UL)
-#define FOREIGN_FRAME_BIT	(1UL<<31)
-#define FOREIGN_FRAME(m)	((m) | FOREIGN_FRAME_BIT)
-
-/* Maximum amount of memory we can handle in a domain in pages */
-#define MAX_DOMAIN_PAGES						\
-    ((unsigned long)((u64)CONFIG_XEN_MAX_DOMAIN_MEMORY * 1024 * 1024 * 1024 / PAGE_SIZE))
-
-
-extern unsigned long get_phys_to_machine(unsigned long pfn);
-extern void set_phys_to_machine(unsigned long pfn, unsigned long mfn);
-
-static inline unsigned long pfn_to_mfn(unsigned long pfn)
-{
-	if (xen_feature(XENFEAT_auto_translated_physmap))
-		return pfn;
-
-	return get_phys_to_machine(pfn) & ~FOREIGN_FRAME_BIT;
-}
-
-static inline int phys_to_machine_mapping_valid(unsigned long pfn)
-{
-	if (xen_feature(XENFEAT_auto_translated_physmap))
-		return 1;
-
-	return get_phys_to_machine(pfn) != INVALID_P2M_ENTRY;
-}
-
-static inline unsigned long mfn_to_pfn(unsigned long mfn)
-{
-	unsigned long pfn;
-
-	if (xen_feature(XENFEAT_auto_translated_physmap))
-		return mfn;
-
-#if 0
-	if (unlikely((mfn >> machine_to_phys_order) != 0))
-		return max_mapnr;
-#endif
-
-	pfn = 0;
-	/*
-	 * The array access can fail (e.g., device space beyond end of RAM).
-	 * In such cases it doesn't matter what we return (we return garbage),
-	 * but we must handle the fault without crashing!
-	 */
-	__get_user(pfn, &machine_to_phys_mapping[mfn]);
-
-	return pfn;
-}
-
-static inline xmaddr_t phys_to_machine(xpaddr_t phys)
-{
-	unsigned offset = phys.paddr & ~PAGE_MASK;
-	return XMADDR(PFN_PHYS(pfn_to_mfn(PFN_DOWN(phys.paddr))) | offset);
-}
-
-static inline xpaddr_t machine_to_phys(xmaddr_t machine)
-{
-	unsigned offset = machine.maddr & ~PAGE_MASK;
-	return XPADDR(PFN_PHYS(mfn_to_pfn(PFN_DOWN(machine.maddr))) | offset);
-}
-
-/*
- * We detect special mappings in one of two ways:
- *  1. If the MFN is an I/O page then Xen will set the m2p entry
- *     to be outside our maximum possible pseudophys range.
- *  2. If the MFN belongs to a different domain then we will certainly
- *     not have MFN in our p2m table. Conversely, if the page is ours,
- *     then we'll have p2m(m2p(MFN))==MFN.
- * If we detect a special mapping then it doesn't have a 'struct page'.
- * We force !pfn_valid() by returning an out-of-range pointer.
- *
- * NB. These checks require that, for any MFN that is not in our reservation,
- * there is no PFN such that p2m(PFN) == MFN. Otherwise we can get confused if
- * we are foreign-mapping the MFN, and the other domain as m2p(MFN) == PFN.
- * Yikes! Various places must poke in INVALID_P2M_ENTRY for safety.
- *
- * NB2. When deliberately mapping foreign pages into the p2m table, you *must*
- *      use FOREIGN_FRAME(). This will cause pte_pfn() to choke on it, as we
- *      require. In all the cases we care about, the FOREIGN_FRAME bit is
- *      masked (e.g., pfn_to_mfn()) so behaviour there is correct.
- */
-static inline unsigned long mfn_to_local_pfn(unsigned long mfn)
-{
-	extern unsigned long max_mapnr;
-	unsigned long pfn = mfn_to_pfn(mfn);
-	if ((pfn < max_mapnr)
-	    && !xen_feature(XENFEAT_auto_translated_physmap)
-	    && (get_phys_to_machine(pfn) != mfn))
-		return max_mapnr; /* force !pfn_valid() */
-	/* XXX fixme; not true with sparsemem */
-	return pfn;
-}
-
-/* VIRT <-> MACHINE conversion */
-#define virt_to_machine(v)	(phys_to_machine(XPADDR(__pa(v))))
-#define virt_to_mfn(v)		(pfn_to_mfn(PFN_DOWN(__pa(v))))
-#define mfn_to_virt(m)		(__va(mfn_to_pfn(m) << PAGE_SHIFT))
-
-static inline unsigned long pte_mfn(pte_t pte)
-{
-	return (pte.pte & PTE_PFN_MASK) >> PAGE_SHIFT;
-}
-
-static inline pte_t mfn_pte(unsigned long page_nr, pgprot_t pgprot)
-{
-	pte_t pte;
-
-	pte.pte = ((phys_addr_t)page_nr << PAGE_SHIFT) |
-		(pgprot_val(pgprot) & __supported_pte_mask);
-
-	return pte;
-}
-
-static inline pteval_t pte_val_ma(pte_t pte)
-{
-	return pte.pte;
-}
-
-static inline pte_t __pte_ma(pteval_t x)
-{
-	return (pte_t) { .pte = x };
-}
-
-#define pmd_val_ma(v) ((v).pmd)
-#ifdef __PAGETABLE_PUD_FOLDED
-#define pud_val_ma(v) ((v).pgd.pgd)
-#else
-#define pud_val_ma(v) ((v).pud)
-#endif
-#define __pmd_ma(x)	((pmd_t) { (x) } )
-
-#define pgd_val_ma(x)	((x).pgd)
-
-
-xmaddr_t arbitrary_virt_to_machine(void *address);
-void make_lowmem_page_readonly(void *vaddr);
-void make_lowmem_page_readwrite(void *vaddr);
-
-#endif /* ASM_X86__XEN__PAGE_H */
diff --git a/include/asm-x86/xor_32.h b/include/asm-x86/xor_32.h
deleted file mode 100644
index 921b458..0000000
--- a/include/asm-x86/xor_32.h
+++ /dev/null
@@ -1,888 +0,0 @@
-#ifndef ASM_X86__XOR_32_H
-#define ASM_X86__XOR_32_H
-
-/*
- * Optimized RAID-5 checksumming functions for MMX and SSE.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example /usr/src/linux/COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * High-speed RAID5 checksumming functions utilizing MMX instructions.
- * Copyright (C) 1998 Ingo Molnar.
- */
-
-#define LD(x, y)	"       movq   8*("#x")(%1), %%mm"#y"   ;\n"
-#define ST(x, y)	"       movq %%mm"#y",   8*("#x")(%1)   ;\n"
-#define XO1(x, y)	"       pxor   8*("#x")(%2), %%mm"#y"   ;\n"
-#define XO2(x, y)	"       pxor   8*("#x")(%3), %%mm"#y"   ;\n"
-#define XO3(x, y)	"       pxor   8*("#x")(%4), %%mm"#y"   ;\n"
-#define XO4(x, y)	"       pxor   8*("#x")(%5), %%mm"#y"   ;\n"
-
-#include <asm/i387.h>
-
-static void
-xor_pII_mmx_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-{
-	unsigned long lines = bytes >> 7;
-
-	kernel_fpu_begin();
-
-	asm volatile(
-#undef BLOCK
-#define BLOCK(i)				\
-	LD(i, 0)				\
-		LD(i + 1, 1)			\
-			LD(i + 2, 2)		\
-				LD(i + 3, 3)	\
-	XO1(i, 0)				\
-	ST(i, 0)				\
-		XO1(i+1, 1)			\
-		ST(i+1, 1)			\
-			XO1(i + 2, 2)		\
-			ST(i + 2, 2)		\
-				XO1(i + 3, 3)	\
-				ST(i + 3, 3)
-
-	" .align 32			;\n"
-	" 1:                            ;\n"
-
-	BLOCK(0)
-	BLOCK(4)
-	BLOCK(8)
-	BLOCK(12)
-
-	"       addl $128, %1         ;\n"
-	"       addl $128, %2         ;\n"
-	"       decl %0               ;\n"
-	"       jnz 1b                ;\n"
-	: "+r" (lines),
-	  "+r" (p1), "+r" (p2)
-	:
-	: "memory");
-
-	kernel_fpu_end();
-}
-
-static void
-xor_pII_mmx_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	      unsigned long *p3)
-{
-	unsigned long lines = bytes >> 7;
-
-	kernel_fpu_begin();
-
-	asm volatile(
-#undef BLOCK
-#define BLOCK(i)				\
-	LD(i, 0)				\
-		LD(i + 1, 1)			\
-			LD(i + 2, 2)		\
-				LD(i + 3, 3)	\
-	XO1(i, 0)				\
-		XO1(i + 1, 1)			\
-			XO1(i + 2, 2)		\
-				XO1(i + 3, 3)	\
-	XO2(i, 0)				\
-	ST(i, 0)				\
-		XO2(i + 1, 1)			\
-		ST(i + 1, 1)			\
-			XO2(i + 2, 2)		\
-			ST(i + 2, 2)		\
-				XO2(i + 3, 3)	\
-				ST(i + 3, 3)
-
-	" .align 32			;\n"
-	" 1:                            ;\n"
-
-	BLOCK(0)
-	BLOCK(4)
-	BLOCK(8)
-	BLOCK(12)
-
-	"       addl $128, %1         ;\n"
-	"       addl $128, %2         ;\n"
-	"       addl $128, %3         ;\n"
-	"       decl %0               ;\n"
-	"       jnz 1b                ;\n"
-	: "+r" (lines),
-	  "+r" (p1), "+r" (p2), "+r" (p3)
-	:
-	: "memory");
-
-	kernel_fpu_end();
-}
-
-static void
-xor_pII_mmx_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	      unsigned long *p3, unsigned long *p4)
-{
-	unsigned long lines = bytes >> 7;
-
-	kernel_fpu_begin();
-
-	asm volatile(
-#undef BLOCK
-#define BLOCK(i)				\
-	LD(i, 0)				\
-		LD(i + 1, 1)			\
-			LD(i + 2, 2)		\
-				LD(i + 3, 3)	\
-	XO1(i, 0)				\
-		XO1(i + 1, 1)			\
-			XO1(i + 2, 2)		\
-				XO1(i + 3, 3)	\
-	XO2(i, 0)				\
-		XO2(i + 1, 1)			\
-			XO2(i + 2, 2)		\
-				XO2(i + 3, 3)	\
-	XO3(i, 0)				\
-	ST(i, 0)				\
-		XO3(i + 1, 1)			\
-		ST(i + 1, 1)			\
-			XO3(i + 2, 2)		\
-			ST(i + 2, 2)		\
-				XO3(i + 3, 3)	\
-				ST(i + 3, 3)
-
-	" .align 32			;\n"
-	" 1:                            ;\n"
-
-	BLOCK(0)
-	BLOCK(4)
-	BLOCK(8)
-	BLOCK(12)
-
-	"       addl $128, %1         ;\n"
-	"       addl $128, %2         ;\n"
-	"       addl $128, %3         ;\n"
-	"       addl $128, %4         ;\n"
-	"       decl %0               ;\n"
-	"       jnz 1b                ;\n"
-	: "+r" (lines),
-	  "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
-	:
-	: "memory");
-
-	kernel_fpu_end();
-}
-
-
-static void
-xor_pII_mmx_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	      unsigned long *p3, unsigned long *p4, unsigned long *p5)
-{
-	unsigned long lines = bytes >> 7;
-
-	kernel_fpu_begin();
-
-	/* Make sure GCC forgets anything it knows about p4 or p5,
-	   such that it won't pass to the asm volatile below a
-	   register that is shared with any other variable.  That's
-	   because we modify p4 and p5 there, but we can't mark them
-	   as read/write, otherwise we'd overflow the 10-asm-operands
-	   limit of GCC < 3.1.  */
-	asm("" : "+r" (p4), "+r" (p5));
-
-	asm volatile(
-#undef BLOCK
-#define BLOCK(i)				\
-	LD(i, 0)				\
-		LD(i + 1, 1)			\
-			LD(i + 2, 2)		\
-				LD(i + 3, 3)	\
-	XO1(i, 0)				\
-		XO1(i + 1, 1)			\
-			XO1(i + 2, 2)		\
-				XO1(i + 3, 3)	\
-	XO2(i, 0)				\
-		XO2(i + 1, 1)			\
-			XO2(i + 2, 2)		\
-				XO2(i + 3, 3)	\
-	XO3(i, 0)				\
-		XO3(i + 1, 1)			\
-			XO3(i + 2, 2)		\
-				XO3(i + 3, 3)	\
-	XO4(i, 0)				\
-	ST(i, 0)				\
-		XO4(i + 1, 1)			\
-		ST(i + 1, 1)			\
-			XO4(i + 2, 2)		\
-			ST(i + 2, 2)		\
-				XO4(i + 3, 3)	\
-				ST(i + 3, 3)
-
-	" .align 32			;\n"
-	" 1:                            ;\n"
-
-	BLOCK(0)
-	BLOCK(4)
-	BLOCK(8)
-	BLOCK(12)
-
-	"       addl $128, %1         ;\n"
-	"       addl $128, %2         ;\n"
-	"       addl $128, %3         ;\n"
-	"       addl $128, %4         ;\n"
-	"       addl $128, %5         ;\n"
-	"       decl %0               ;\n"
-	"       jnz 1b                ;\n"
-	: "+r" (lines),
-	  "+r" (p1), "+r" (p2), "+r" (p3)
-	: "r" (p4), "r" (p5)
-	: "memory");
-
-	/* p4 and p5 were modified, and now the variables are dead.
-	   Clobber them just to be sure nobody does something stupid
-	   like assuming they have some legal value.  */
-	asm("" : "=r" (p4), "=r" (p5));
-
-	kernel_fpu_end();
-}
-
-#undef LD
-#undef XO1
-#undef XO2
-#undef XO3
-#undef XO4
-#undef ST
-#undef BLOCK
-
-static void
-xor_p5_mmx_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-{
-	unsigned long lines = bytes >> 6;
-
-	kernel_fpu_begin();
-
-	asm volatile(
-	" .align 32	             ;\n"
-	" 1:                         ;\n"
-	"       movq   (%1), %%mm0   ;\n"
-	"       movq  8(%1), %%mm1   ;\n"
-	"       pxor   (%2), %%mm0   ;\n"
-	"       movq 16(%1), %%mm2   ;\n"
-	"       movq %%mm0,   (%1)   ;\n"
-	"       pxor  8(%2), %%mm1   ;\n"
-	"       movq 24(%1), %%mm3   ;\n"
-	"       movq %%mm1,  8(%1)   ;\n"
-	"       pxor 16(%2), %%mm2   ;\n"
-	"       movq 32(%1), %%mm4   ;\n"
-	"       movq %%mm2, 16(%1)   ;\n"
-	"       pxor 24(%2), %%mm3   ;\n"
-	"       movq 40(%1), %%mm5   ;\n"
-	"       movq %%mm3, 24(%1)   ;\n"
-	"       pxor 32(%2), %%mm4   ;\n"
-	"       movq 48(%1), %%mm6   ;\n"
-	"       movq %%mm4, 32(%1)   ;\n"
-	"       pxor 40(%2), %%mm5   ;\n"
-	"       movq 56(%1), %%mm7   ;\n"
-	"       movq %%mm5, 40(%1)   ;\n"
-	"       pxor 48(%2), %%mm6   ;\n"
-	"       pxor 56(%2), %%mm7   ;\n"
-	"       movq %%mm6, 48(%1)   ;\n"
-	"       movq %%mm7, 56(%1)   ;\n"
-
-	"       addl $64, %1         ;\n"
-	"       addl $64, %2         ;\n"
-	"       decl %0              ;\n"
-	"       jnz 1b               ;\n"
-	: "+r" (lines),
-	  "+r" (p1), "+r" (p2)
-	:
-	: "memory");
-
-	kernel_fpu_end();
-}
-
-static void
-xor_p5_mmx_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	     unsigned long *p3)
-{
-	unsigned long lines = bytes >> 6;
-
-	kernel_fpu_begin();
-
-	asm volatile(
-	" .align 32,0x90             ;\n"
-	" 1:                         ;\n"
-	"       movq   (%1), %%mm0   ;\n"
-	"       movq  8(%1), %%mm1   ;\n"
-	"       pxor   (%2), %%mm0   ;\n"
-	"       movq 16(%1), %%mm2   ;\n"
-	"       pxor  8(%2), %%mm1   ;\n"
-	"       pxor   (%3), %%mm0   ;\n"
-	"       pxor 16(%2), %%mm2   ;\n"
-	"       movq %%mm0,   (%1)   ;\n"
-	"       pxor  8(%3), %%mm1   ;\n"
-	"       pxor 16(%3), %%mm2   ;\n"
-	"       movq 24(%1), %%mm3   ;\n"
-	"       movq %%mm1,  8(%1)   ;\n"
-	"       movq 32(%1), %%mm4   ;\n"
-	"       movq 40(%1), %%mm5   ;\n"
-	"       pxor 24(%2), %%mm3   ;\n"
-	"       movq %%mm2, 16(%1)   ;\n"
-	"       pxor 32(%2), %%mm4   ;\n"
-	"       pxor 24(%3), %%mm3   ;\n"
-	"       pxor 40(%2), %%mm5   ;\n"
-	"       movq %%mm3, 24(%1)   ;\n"
-	"       pxor 32(%3), %%mm4   ;\n"
-	"       pxor 40(%3), %%mm5   ;\n"
-	"       movq 48(%1), %%mm6   ;\n"
-	"       movq %%mm4, 32(%1)   ;\n"
-	"       movq 56(%1), %%mm7   ;\n"
-	"       pxor 48(%2), %%mm6   ;\n"
-	"       movq %%mm5, 40(%1)   ;\n"
-	"       pxor 56(%2), %%mm7   ;\n"
-	"       pxor 48(%3), %%mm6   ;\n"
-	"       pxor 56(%3), %%mm7   ;\n"
-	"       movq %%mm6, 48(%1)   ;\n"
-	"       movq %%mm7, 56(%1)   ;\n"
-
-	"       addl $64, %1         ;\n"
-	"       addl $64, %2         ;\n"
-	"       addl $64, %3         ;\n"
-	"       decl %0              ;\n"
-	"       jnz 1b               ;\n"
-	: "+r" (lines),
-	  "+r" (p1), "+r" (p2), "+r" (p3)
-	:
-	: "memory" );
-
-	kernel_fpu_end();
-}
-
-static void
-xor_p5_mmx_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	     unsigned long *p3, unsigned long *p4)
-{
-	unsigned long lines = bytes >> 6;
-
-	kernel_fpu_begin();
-
-	asm volatile(
-	" .align 32,0x90             ;\n"
-	" 1:                         ;\n"
-	"       movq   (%1), %%mm0   ;\n"
-	"       movq  8(%1), %%mm1   ;\n"
-	"       pxor   (%2), %%mm0   ;\n"
-	"       movq 16(%1), %%mm2   ;\n"
-	"       pxor  8(%2), %%mm1   ;\n"
-	"       pxor   (%3), %%mm0   ;\n"
-	"       pxor 16(%2), %%mm2   ;\n"
-	"       pxor  8(%3), %%mm1   ;\n"
-	"       pxor   (%4), %%mm0   ;\n"
-	"       movq 24(%1), %%mm3   ;\n"
-	"       pxor 16(%3), %%mm2   ;\n"
-	"       pxor  8(%4), %%mm1   ;\n"
-	"       movq %%mm0,   (%1)   ;\n"
-	"       movq 32(%1), %%mm4   ;\n"
-	"       pxor 24(%2), %%mm3   ;\n"
-	"       pxor 16(%4), %%mm2   ;\n"
-	"       movq %%mm1,  8(%1)   ;\n"
-	"       movq 40(%1), %%mm5   ;\n"
-	"       pxor 32(%2), %%mm4   ;\n"
-	"       pxor 24(%3), %%mm3   ;\n"
-	"       movq %%mm2, 16(%1)   ;\n"
-	"       pxor 40(%2), %%mm5   ;\n"
-	"       pxor 32(%3), %%mm4   ;\n"
-	"       pxor 24(%4), %%mm3   ;\n"
-	"       movq %%mm3, 24(%1)   ;\n"
-	"       movq 56(%1), %%mm7   ;\n"
-	"       movq 48(%1), %%mm6   ;\n"
-	"       pxor 40(%3), %%mm5   ;\n"
-	"       pxor 32(%4), %%mm4   ;\n"
-	"       pxor 48(%2), %%mm6   ;\n"
-	"       movq %%mm4, 32(%1)   ;\n"
-	"       pxor 56(%2), %%mm7   ;\n"
-	"       pxor 40(%4), %%mm5   ;\n"
-	"       pxor 48(%3), %%mm6   ;\n"
-	"       pxor 56(%3), %%mm7   ;\n"
-	"       movq %%mm5, 40(%1)   ;\n"
-	"       pxor 48(%4), %%mm6   ;\n"
-	"       pxor 56(%4), %%mm7   ;\n"
-	"       movq %%mm6, 48(%1)   ;\n"
-	"       movq %%mm7, 56(%1)   ;\n"
-
-	"       addl $64, %1         ;\n"
-	"       addl $64, %2         ;\n"
-	"       addl $64, %3         ;\n"
-	"       addl $64, %4         ;\n"
-	"       decl %0              ;\n"
-	"       jnz 1b               ;\n"
-	: "+r" (lines),
-	  "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
-	:
-	: "memory");
-
-	kernel_fpu_end();
-}
-
-static void
-xor_p5_mmx_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	     unsigned long *p3, unsigned long *p4, unsigned long *p5)
-{
-	unsigned long lines = bytes >> 6;
-
-	kernel_fpu_begin();
-
-	/* Make sure GCC forgets anything it knows about p4 or p5,
-	   such that it won't pass to the asm volatile below a
-	   register that is shared with any other variable.  That's
-	   because we modify p4 and p5 there, but we can't mark them
-	   as read/write, otherwise we'd overflow the 10-asm-operands
-	   limit of GCC < 3.1.  */
-	asm("" : "+r" (p4), "+r" (p5));
-
-	asm volatile(
-	" .align 32,0x90             ;\n"
-	" 1:                         ;\n"
-	"       movq   (%1), %%mm0   ;\n"
-	"       movq  8(%1), %%mm1   ;\n"
-	"       pxor   (%2), %%mm0   ;\n"
-	"       pxor  8(%2), %%mm1   ;\n"
-	"       movq 16(%1), %%mm2   ;\n"
-	"       pxor   (%3), %%mm0   ;\n"
-	"       pxor  8(%3), %%mm1   ;\n"
-	"       pxor 16(%2), %%mm2   ;\n"
-	"       pxor   (%4), %%mm0   ;\n"
-	"       pxor  8(%4), %%mm1   ;\n"
-	"       pxor 16(%3), %%mm2   ;\n"
-	"       movq 24(%1), %%mm3   ;\n"
-	"       pxor   (%5), %%mm0   ;\n"
-	"       pxor  8(%5), %%mm1   ;\n"
-	"       movq %%mm0,   (%1)   ;\n"
-	"       pxor 16(%4), %%mm2   ;\n"
-	"       pxor 24(%2), %%mm3   ;\n"
-	"       movq %%mm1,  8(%1)   ;\n"
-	"       pxor 16(%5), %%mm2   ;\n"
-	"       pxor 24(%3), %%mm3   ;\n"
-	"       movq 32(%1), %%mm4   ;\n"
-	"       movq %%mm2, 16(%1)   ;\n"
-	"       pxor 24(%4), %%mm3   ;\n"
-	"       pxor 32(%2), %%mm4   ;\n"
-	"       movq 40(%1), %%mm5   ;\n"
-	"       pxor 24(%5), %%mm3   ;\n"
-	"       pxor 32(%3), %%mm4   ;\n"
-	"       pxor 40(%2), %%mm5   ;\n"
-	"       movq %%mm3, 24(%1)   ;\n"
-	"       pxor 32(%4), %%mm4   ;\n"
-	"       pxor 40(%3), %%mm5   ;\n"
-	"       movq 48(%1), %%mm6   ;\n"
-	"       movq 56(%1), %%mm7   ;\n"
-	"       pxor 32(%5), %%mm4   ;\n"
-	"       pxor 40(%4), %%mm5   ;\n"
-	"       pxor 48(%2), %%mm6   ;\n"
-	"       pxor 56(%2), %%mm7   ;\n"
-	"       movq %%mm4, 32(%1)   ;\n"
-	"       pxor 48(%3), %%mm6   ;\n"
-	"       pxor 56(%3), %%mm7   ;\n"
-	"       pxor 40(%5), %%mm5   ;\n"
-	"       pxor 48(%4), %%mm6   ;\n"
-	"       pxor 56(%4), %%mm7   ;\n"
-	"       movq %%mm5, 40(%1)   ;\n"
-	"       pxor 48(%5), %%mm6   ;\n"
-	"       pxor 56(%5), %%mm7   ;\n"
-	"       movq %%mm6, 48(%1)   ;\n"
-	"       movq %%mm7, 56(%1)   ;\n"
-
-	"       addl $64, %1         ;\n"
-	"       addl $64, %2         ;\n"
-	"       addl $64, %3         ;\n"
-	"       addl $64, %4         ;\n"
-	"       addl $64, %5         ;\n"
-	"       decl %0              ;\n"
-	"       jnz 1b               ;\n"
-	: "+r" (lines),
-	  "+r" (p1), "+r" (p2), "+r" (p3)
-	: "r" (p4), "r" (p5)
-	: "memory");
-
-	/* p4 and p5 were modified, and now the variables are dead.
-	   Clobber them just to be sure nobody does something stupid
-	   like assuming they have some legal value.  */
-	asm("" : "=r" (p4), "=r" (p5));
-
-	kernel_fpu_end();
-}
-
-static struct xor_block_template xor_block_pII_mmx = {
-	.name = "pII_mmx",
-	.do_2 = xor_pII_mmx_2,
-	.do_3 = xor_pII_mmx_3,
-	.do_4 = xor_pII_mmx_4,
-	.do_5 = xor_pII_mmx_5,
-};
-
-static struct xor_block_template xor_block_p5_mmx = {
-	.name = "p5_mmx",
-	.do_2 = xor_p5_mmx_2,
-	.do_3 = xor_p5_mmx_3,
-	.do_4 = xor_p5_mmx_4,
-	.do_5 = xor_p5_mmx_5,
-};
-
-/*
- * Cache avoiding checksumming functions utilizing KNI instructions
- * Copyright (C) 1999 Zach Brown (with obvious credit due Ingo)
- */
-
-#define XMMS_SAVE				\
-do {						\
-	preempt_disable();			\
-	cr0 = read_cr0();			\
-	clts();					\
-	asm volatile(				\
-		"movups %%xmm0,(%0)	;\n\t"	\
-		"movups %%xmm1,0x10(%0)	;\n\t"	\
-		"movups %%xmm2,0x20(%0)	;\n\t"	\
-		"movups %%xmm3,0x30(%0)	;\n\t"	\
-		:				\
-		: "r" (xmm_save) 		\
-		: "memory");			\
-} while (0)
-
-#define XMMS_RESTORE				\
-do {						\
-	asm volatile(				\
-		"sfence			;\n\t"	\
-		"movups (%0),%%xmm0	;\n\t"	\
-		"movups 0x10(%0),%%xmm1	;\n\t"	\
-		"movups 0x20(%0),%%xmm2	;\n\t"	\
-		"movups 0x30(%0),%%xmm3	;\n\t"	\
-		:				\
-		: "r" (xmm_save)		\
-		: "memory");			\
-	write_cr0(cr0);				\
-	preempt_enable();			\
-} while (0)
-
-#define ALIGN16 __attribute__((aligned(16)))
-
-#define OFFS(x)		"16*("#x")"
-#define PF_OFFS(x)	"256+16*("#x")"
-#define	PF0(x)		"	prefetchnta "PF_OFFS(x)"(%1)		;\n"
-#define LD(x, y)	"       movaps   "OFFS(x)"(%1), %%xmm"#y"	;\n"
-#define ST(x, y)	"       movaps %%xmm"#y",   "OFFS(x)"(%1)	;\n"
-#define PF1(x)		"	prefetchnta "PF_OFFS(x)"(%2)		;\n"
-#define PF2(x)		"	prefetchnta "PF_OFFS(x)"(%3)		;\n"
-#define PF3(x)		"	prefetchnta "PF_OFFS(x)"(%4)		;\n"
-#define PF4(x)		"	prefetchnta "PF_OFFS(x)"(%5)		;\n"
-#define PF5(x)		"	prefetchnta "PF_OFFS(x)"(%6)		;\n"
-#define XO1(x, y)	"       xorps   "OFFS(x)"(%2), %%xmm"#y"	;\n"
-#define XO2(x, y)	"       xorps   "OFFS(x)"(%3), %%xmm"#y"	;\n"
-#define XO3(x, y)	"       xorps   "OFFS(x)"(%4), %%xmm"#y"	;\n"
-#define XO4(x, y)	"       xorps   "OFFS(x)"(%5), %%xmm"#y"	;\n"
-#define XO5(x, y)	"       xorps   "OFFS(x)"(%6), %%xmm"#y"	;\n"
-
-
-static void
-xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-{
-	unsigned long lines = bytes >> 8;
-	char xmm_save[16*4] ALIGN16;
-	int cr0;
-
-	XMMS_SAVE;
-
-	asm volatile(
-#undef BLOCK
-#define BLOCK(i)					\
-		LD(i, 0)				\
-			LD(i + 1, 1)			\
-		PF1(i)					\
-				PF1(i + 2)		\
-				LD(i + 2, 2)		\
-					LD(i + 3, 3)	\
-		PF0(i + 4)				\
-				PF0(i + 6)		\
-		XO1(i, 0)				\
-			XO1(i + 1, 1)			\
-				XO1(i + 2, 2)		\
-					XO1(i + 3, 3)	\
-		ST(i, 0)				\
-			ST(i + 1, 1)			\
-				ST(i + 2, 2)		\
-					ST(i + 3, 3)	\
-
-
-		PF0(0)
-				PF0(2)
-
-	" .align 32			;\n"
-	" 1:                            ;\n"
-
-		BLOCK(0)
-		BLOCK(4)
-		BLOCK(8)
-		BLOCK(12)
-
-	"       addl $256, %1           ;\n"
-	"       addl $256, %2           ;\n"
-	"       decl %0                 ;\n"
-	"       jnz 1b                  ;\n"
-	: "+r" (lines),
-	  "+r" (p1), "+r" (p2)
-	:
-	: "memory");
-
-	XMMS_RESTORE;
-}
-
-static void
-xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	  unsigned long *p3)
-{
-	unsigned long lines = bytes >> 8;
-	char xmm_save[16*4] ALIGN16;
-	int cr0;
-
-	XMMS_SAVE;
-
-	asm volatile(
-#undef BLOCK
-#define BLOCK(i) \
-		PF1(i)					\
-				PF1(i + 2)		\
-		LD(i,0)					\
-			LD(i + 1, 1)			\
-				LD(i + 2, 2)		\
-					LD(i + 3, 3)	\
-		PF2(i)					\
-				PF2(i + 2)		\
-		PF0(i + 4)				\
-				PF0(i + 6)		\
-		XO1(i,0)				\
-			XO1(i + 1, 1)			\
-				XO1(i + 2, 2)		\
-					XO1(i + 3, 3)	\
-		XO2(i,0)				\
-			XO2(i + 1, 1)			\
-				XO2(i + 2, 2)		\
-					XO2(i + 3, 3)	\
-		ST(i,0)					\
-			ST(i + 1, 1)			\
-				ST(i + 2, 2)		\
-					ST(i + 3, 3)	\
-
-
-		PF0(0)
-				PF0(2)
-
-	" .align 32			;\n"
-	" 1:                            ;\n"
-
-		BLOCK(0)
-		BLOCK(4)
-		BLOCK(8)
-		BLOCK(12)
-
-	"       addl $256, %1           ;\n"
-	"       addl $256, %2           ;\n"
-	"       addl $256, %3           ;\n"
-	"       decl %0                 ;\n"
-	"       jnz 1b                  ;\n"
-	: "+r" (lines),
-	  "+r" (p1), "+r"(p2), "+r"(p3)
-	:
-	: "memory" );
-
-	XMMS_RESTORE;
-}
-
-static void
-xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	  unsigned long *p3, unsigned long *p4)
-{
-	unsigned long lines = bytes >> 8;
-	char xmm_save[16*4] ALIGN16;
-	int cr0;
-
-	XMMS_SAVE;
-
-	asm volatile(
-#undef BLOCK
-#define BLOCK(i) \
-		PF1(i)					\
-				PF1(i + 2)		\
-		LD(i,0)					\
-			LD(i + 1, 1)			\
-				LD(i + 2, 2)		\
-					LD(i + 3, 3)	\
-		PF2(i)					\
-				PF2(i + 2)		\
-		XO1(i,0)				\
-			XO1(i + 1, 1)			\
-				XO1(i + 2, 2)		\
-					XO1(i + 3, 3)	\
-		PF3(i)					\
-				PF3(i + 2)		\
-		PF0(i + 4)				\
-				PF0(i + 6)		\
-		XO2(i,0)				\
-			XO2(i + 1, 1)			\
-				XO2(i + 2, 2)		\
-					XO2(i + 3, 3)	\
-		XO3(i,0)				\
-			XO3(i + 1, 1)			\
-				XO3(i + 2, 2)		\
-					XO3(i + 3, 3)	\
-		ST(i,0)					\
-			ST(i + 1, 1)			\
-				ST(i + 2, 2)		\
-					ST(i + 3, 3)	\
-
-
-		PF0(0)
-				PF0(2)
-
-	" .align 32			;\n"
-	" 1:                            ;\n"
-
-		BLOCK(0)
-		BLOCK(4)
-		BLOCK(8)
-		BLOCK(12)
-
-	"       addl $256, %1           ;\n"
-	"       addl $256, %2           ;\n"
-	"       addl $256, %3           ;\n"
-	"       addl $256, %4           ;\n"
-	"       decl %0                 ;\n"
-	"       jnz 1b                  ;\n"
-	: "+r" (lines),
-	  "+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
-	:
-	: "memory" );
-
-	XMMS_RESTORE;
-}
-
-static void
-xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	  unsigned long *p3, unsigned long *p4, unsigned long *p5)
-{
-	unsigned long lines = bytes >> 8;
-	char xmm_save[16*4] ALIGN16;
-	int cr0;
-
-	XMMS_SAVE;
-
-	/* Make sure GCC forgets anything it knows about p4 or p5,
-	   such that it won't pass to the asm volatile below a
-	   register that is shared with any other variable.  That's
-	   because we modify p4 and p5 there, but we can't mark them
-	   as read/write, otherwise we'd overflow the 10-asm-operands
-	   limit of GCC < 3.1.  */
-	asm("" : "+r" (p4), "+r" (p5));
-
-	asm volatile(
-#undef BLOCK
-#define BLOCK(i) \
-		PF1(i)					\
-				PF1(i + 2)		\
-		LD(i,0)					\
-			LD(i + 1, 1)			\
-				LD(i + 2, 2)		\
-					LD(i + 3, 3)	\
-		PF2(i)					\
-				PF2(i + 2)		\
-		XO1(i,0)				\
-			XO1(i + 1, 1)			\
-				XO1(i + 2, 2)		\
-					XO1(i + 3, 3)	\
-		PF3(i)					\
-				PF3(i + 2)		\
-		XO2(i,0)				\
-			XO2(i + 1, 1)			\
-				XO2(i + 2, 2)		\
-					XO2(i + 3, 3)	\
-		PF4(i)					\
-				PF4(i + 2)		\
-		PF0(i + 4)				\
-				PF0(i + 6)		\
-		XO3(i,0)				\
-			XO3(i + 1, 1)			\
-				XO3(i + 2, 2)		\
-					XO3(i + 3, 3)	\
-		XO4(i,0)				\
-			XO4(i + 1, 1)			\
-				XO4(i + 2, 2)		\
-					XO4(i + 3, 3)	\
-		ST(i,0)					\
-			ST(i + 1, 1)			\
-				ST(i + 2, 2)		\
-					ST(i + 3, 3)	\
-
-
-		PF0(0)
-				PF0(2)
-
-	" .align 32			;\n"
-	" 1:                            ;\n"
-
-		BLOCK(0)
-		BLOCK(4)
-		BLOCK(8)
-		BLOCK(12)
-
-	"       addl $256, %1           ;\n"
-	"       addl $256, %2           ;\n"
-	"       addl $256, %3           ;\n"
-	"       addl $256, %4           ;\n"
-	"       addl $256, %5           ;\n"
-	"       decl %0                 ;\n"
-	"       jnz 1b                  ;\n"
-	: "+r" (lines),
-	  "+r" (p1), "+r" (p2), "+r" (p3)
-	: "r" (p4), "r" (p5)
-	: "memory");
-
-	/* p4 and p5 were modified, and now the variables are dead.
-	   Clobber them just to be sure nobody does something stupid
-	   like assuming they have some legal value.  */
-	asm("" : "=r" (p4), "=r" (p5));
-
-	XMMS_RESTORE;
-}
-
-static struct xor_block_template xor_block_pIII_sse = {
-	.name = "pIII_sse",
-	.do_2 = xor_sse_2,
-	.do_3 = xor_sse_3,
-	.do_4 = xor_sse_4,
-	.do_5 = xor_sse_5,
-};
-
-/* Also try the generic routines.  */
-#include <asm-generic/xor.h>
-
-#undef XOR_TRY_TEMPLATES
-#define XOR_TRY_TEMPLATES				\
-do {							\
-	xor_speed(&xor_block_8regs);			\
-	xor_speed(&xor_block_8regs_p);			\
-	xor_speed(&xor_block_32regs);			\
-	xor_speed(&xor_block_32regs_p);			\
-	if (cpu_has_xmm)				\
-		xor_speed(&xor_block_pIII_sse);		\
-	if (cpu_has_mmx) {				\
-		xor_speed(&xor_block_pII_mmx);		\
-		xor_speed(&xor_block_p5_mmx);		\
-	}						\
-} while (0)
-
-/* We force the use of the SSE xor block because it can write around L2.
-   We may also be able to load into the L1 only depending on how the cpu
-   deals with a load to a line that is being prefetched.  */
-#define XOR_SELECT_TEMPLATE(FASTEST)			\
-	(cpu_has_xmm ? &xor_block_pIII_sse : FASTEST)
-
-#endif /* ASM_X86__XOR_32_H */
diff --git a/include/asm-x86/xor_64.h b/include/asm-x86/xor_64.h
deleted file mode 100644
index 2d3a18d..0000000
--- a/include/asm-x86/xor_64.h
+++ /dev/null
@@ -1,361 +0,0 @@
-#ifndef ASM_X86__XOR_64_H
-#define ASM_X86__XOR_64_H
-
-/*
- * Optimized RAID-5 checksumming functions for MMX and SSE.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example /usr/src/linux/COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-/*
- * Cache avoiding checksumming functions utilizing KNI instructions
- * Copyright (C) 1999 Zach Brown (with obvious credit due Ingo)
- */
-
-/*
- * Based on
- * High-speed RAID5 checksumming functions utilizing SSE instructions.
- * Copyright (C) 1998 Ingo Molnar.
- */
-
-/*
- * x86-64 changes / gcc fixes from Andi Kleen.
- * Copyright 2002 Andi Kleen, SuSE Labs.
- *
- * This hasn't been optimized for the hammer yet, but there are likely
- * no advantages to be gotten from x86-64 here anyways.
- */
-
-typedef struct {
-	unsigned long a, b;
-} __attribute__((aligned(16))) xmm_store_t;
-
-/* Doesn't use gcc to save the XMM registers, because there is no easy way to
-   tell it to do a clts before the register saving. */
-#define XMMS_SAVE				\
-do {						\
-	preempt_disable();			\
-	asm volatile(				\
-		"movq %%cr0,%0		;\n\t"	\
-		"clts			;\n\t"	\
-		"movups %%xmm0,(%1)	;\n\t"	\
-		"movups %%xmm1,0x10(%1)	;\n\t"	\
-		"movups %%xmm2,0x20(%1)	;\n\t"	\
-		"movups %%xmm3,0x30(%1)	;\n\t"	\
-		: "=&r" (cr0)			\
-		: "r" (xmm_save) 		\
-		: "memory");			\
-} while (0)
-
-#define XMMS_RESTORE				\
-do {						\
-	asm volatile(				\
-		"sfence			;\n\t"	\
-		"movups (%1),%%xmm0	;\n\t"	\
-		"movups 0x10(%1),%%xmm1	;\n\t"	\
-		"movups 0x20(%1),%%xmm2	;\n\t"	\
-		"movups 0x30(%1),%%xmm3	;\n\t"	\
-		"movq 	%0,%%cr0	;\n\t"	\
-		:				\
-		: "r" (cr0), "r" (xmm_save)	\
-		: "memory");			\
-	preempt_enable();			\
-} while (0)
-
-#define OFFS(x)		"16*("#x")"
-#define PF_OFFS(x)	"256+16*("#x")"
-#define	PF0(x)		"	prefetchnta "PF_OFFS(x)"(%[p1])		;\n"
-#define LD(x, y)	"       movaps   "OFFS(x)"(%[p1]), %%xmm"#y"	;\n"
-#define ST(x, y)	"       movaps %%xmm"#y",   "OFFS(x)"(%[p1])	;\n"
-#define PF1(x)		"	prefetchnta "PF_OFFS(x)"(%[p2])		;\n"
-#define PF2(x)		"	prefetchnta "PF_OFFS(x)"(%[p3])		;\n"
-#define PF3(x)		"	prefetchnta "PF_OFFS(x)"(%[p4])		;\n"
-#define PF4(x)		"	prefetchnta "PF_OFFS(x)"(%[p5])		;\n"
-#define PF5(x)		"	prefetchnta "PF_OFFS(x)"(%[p6])		;\n"
-#define XO1(x, y)	"       xorps   "OFFS(x)"(%[p2]), %%xmm"#y"	;\n"
-#define XO2(x, y)	"       xorps   "OFFS(x)"(%[p3]), %%xmm"#y"	;\n"
-#define XO3(x, y)	"       xorps   "OFFS(x)"(%[p4]), %%xmm"#y"	;\n"
-#define XO4(x, y)	"       xorps   "OFFS(x)"(%[p5]), %%xmm"#y"	;\n"
-#define XO5(x, y)	"       xorps   "OFFS(x)"(%[p6]), %%xmm"#y"	;\n"
-
-
-static void
-xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-{
-	unsigned int lines = bytes >> 8;
-	unsigned long cr0;
-	xmm_store_t xmm_save[4];
-
-	XMMS_SAVE;
-
-	asm volatile(
-#undef BLOCK
-#define BLOCK(i) \
-		LD(i, 0)				\
-			LD(i + 1, 1)			\
-		PF1(i)					\
-				PF1(i + 2)		\
-				LD(i + 2, 2)		\
-					LD(i + 3, 3)	\
-		PF0(i + 4)				\
-				PF0(i + 6)		\
-		XO1(i, 0)				\
-			XO1(i + 1, 1)			\
-				XO1(i + 2, 2)		\
-					XO1(i + 3, 3)	\
-		ST(i, 0)				\
-			ST(i + 1, 1)			\
-				ST(i + 2, 2)		\
-					ST(i + 3, 3)	\
-
-
-		PF0(0)
-				PF0(2)
-
-	" .align 32			;\n"
-	" 1:                            ;\n"
-
-		BLOCK(0)
-		BLOCK(4)
-		BLOCK(8)
-		BLOCK(12)
-
-	"       addq %[inc], %[p1]           ;\n"
-	"       addq %[inc], %[p2]           ;\n"
-		"		decl %[cnt] ; jnz 1b"
-	: [p1] "+r" (p1), [p2] "+r" (p2), [cnt] "+r" (lines)
-	: [inc] "r" (256UL)
-	: "memory");
-
-	XMMS_RESTORE;
-}
-
-static void
-xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	  unsigned long *p3)
-{
-	unsigned int lines = bytes >> 8;
-	xmm_store_t xmm_save[4];
-	unsigned long cr0;
-
-	XMMS_SAVE;
-
-	asm volatile(
-#undef BLOCK
-#define BLOCK(i) \
-		PF1(i)					\
-				PF1(i + 2)		\
-		LD(i, 0)					\
-			LD(i + 1, 1)			\
-				LD(i + 2, 2)		\
-					LD(i + 3, 3)	\
-		PF2(i)					\
-				PF2(i + 2)		\
-		PF0(i + 4)				\
-				PF0(i + 6)		\
-		XO1(i, 0)				\
-			XO1(i + 1, 1)			\
-				XO1(i + 2, 2)		\
-					XO1(i + 3, 3)	\
-		XO2(i, 0)				\
-			XO2(i + 1, 1)			\
-				XO2(i + 2, 2)		\
-					XO2(i + 3, 3)	\
-		ST(i, 0)				\
-			ST(i + 1, 1)			\
-				ST(i + 2, 2)		\
-					ST(i + 3, 3)	\
-
-
-		PF0(0)
-				PF0(2)
-
-	" .align 32			;\n"
-	" 1:                            ;\n"
-
-		BLOCK(0)
-		BLOCK(4)
-		BLOCK(8)
-		BLOCK(12)
-
-	"       addq %[inc], %[p1]           ;\n"
-	"       addq %[inc], %[p2]          ;\n"
-	"       addq %[inc], %[p3]           ;\n"
-		"		decl %[cnt] ; jnz 1b"
-	: [cnt] "+r" (lines),
-	  [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3)
-	: [inc] "r" (256UL)
-	: "memory");
-	XMMS_RESTORE;
-}
-
-static void
-xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	  unsigned long *p3, unsigned long *p4)
-{
-	unsigned int lines = bytes >> 8;
-	xmm_store_t xmm_save[4];
-	unsigned long cr0;
-
-	XMMS_SAVE;
-
-	asm volatile(
-#undef BLOCK
-#define BLOCK(i) \
-		PF1(i)					\
-				PF1(i + 2)		\
-		LD(i, 0)				\
-			LD(i + 1, 1)			\
-				LD(i + 2, 2)		\
-					LD(i + 3, 3)	\
-		PF2(i)					\
-				PF2(i + 2)		\
-		XO1(i, 0)				\
-			XO1(i + 1, 1)			\
-				XO1(i + 2, 2)		\
-					XO1(i + 3, 3)	\
-		PF3(i)					\
-				PF3(i + 2)		\
-		PF0(i + 4)				\
-				PF0(i + 6)		\
-		XO2(i, 0)				\
-			XO2(i + 1, 1)			\
-				XO2(i + 2, 2)		\
-					XO2(i + 3, 3)	\
-		XO3(i, 0)				\
-			XO3(i + 1, 1)			\
-				XO3(i + 2, 2)		\
-					XO3(i + 3, 3)	\
-		ST(i, 0)				\
-			ST(i + 1, 1)			\
-				ST(i + 2, 2)		\
-					ST(i + 3, 3)	\
-
-
-		PF0(0)
-				PF0(2)
-
-	" .align 32			;\n"
-	" 1:                            ;\n"
-
-		BLOCK(0)
-		BLOCK(4)
-		BLOCK(8)
-		BLOCK(12)
-
-	"       addq %[inc], %[p1]           ;\n"
-	"       addq %[inc], %[p2]           ;\n"
-	"       addq %[inc], %[p3]           ;\n"
-	"       addq %[inc], %[p4]           ;\n"
-	"	decl %[cnt] ; jnz 1b"
-	: [cnt] "+c" (lines),
-	  [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3), [p4] "+r" (p4)
-	: [inc] "r" (256UL)
-	: "memory" );
-
-	XMMS_RESTORE;
-}
-
-static void
-xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	  unsigned long *p3, unsigned long *p4, unsigned long *p5)
-{
-	unsigned int lines = bytes >> 8;
-	xmm_store_t xmm_save[4];
-	unsigned long cr0;
-
-	XMMS_SAVE;
-
-	asm volatile(
-#undef BLOCK
-#define BLOCK(i) \
-		PF1(i)					\
-				PF1(i + 2)		\
-		LD(i, 0)				\
-			LD(i + 1, 1)			\
-				LD(i + 2, 2)		\
-					LD(i + 3, 3)	\
-		PF2(i)					\
-				PF2(i + 2)		\
-		XO1(i, 0)				\
-			XO1(i + 1, 1)			\
-				XO1(i + 2, 2)		\
-					XO1(i + 3, 3)	\
-		PF3(i)					\
-				PF3(i + 2)		\
-		XO2(i, 0)				\
-			XO2(i + 1, 1)			\
-				XO2(i + 2, 2)		\
-					XO2(i + 3, 3)	\
-		PF4(i)					\
-				PF4(i + 2)		\
-		PF0(i + 4)				\
-				PF0(i + 6)		\
-		XO3(i, 0)				\
-			XO3(i + 1, 1)			\
-				XO3(i + 2, 2)		\
-					XO3(i + 3, 3)	\
-		XO4(i, 0)				\
-			XO4(i + 1, 1)			\
-				XO4(i + 2, 2)		\
-					XO4(i + 3, 3)	\
-		ST(i, 0)				\
-			ST(i + 1, 1)			\
-				ST(i + 2, 2)		\
-					ST(i + 3, 3)	\
-
-
-		PF0(0)
-				PF0(2)
-
-	" .align 32			;\n"
-	" 1:                            ;\n"
-
-		BLOCK(0)
-		BLOCK(4)
-		BLOCK(8)
-		BLOCK(12)
-
-	"       addq %[inc], %[p1]           ;\n"
-	"       addq %[inc], %[p2]           ;\n"
-	"       addq %[inc], %[p3]           ;\n"
-	"       addq %[inc], %[p4]           ;\n"
-	"       addq %[inc], %[p5]           ;\n"
-	"	decl %[cnt] ; jnz 1b"
-	: [cnt] "+c" (lines),
-	  [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3), [p4] "+r" (p4),
-	  [p5] "+r" (p5)
-	: [inc] "r" (256UL)
-	: "memory");
-
-	XMMS_RESTORE;
-}
-
-static struct xor_block_template xor_block_sse = {
-	.name = "generic_sse",
-	.do_2 = xor_sse_2,
-	.do_3 = xor_sse_3,
-	.do_4 = xor_sse_4,
-	.do_5 = xor_sse_5,
-};
-
-#undef XOR_TRY_TEMPLATES
-#define XOR_TRY_TEMPLATES			\
-do {						\
-	xor_speed(&xor_block_sse);		\
-} while (0)
-
-/* We force the use of the SSE xor block because it can write around L2.
-   We may also be able to load into the L1 only depending on how the cpu
-   deals with a load to a line that is being prefetched.  */
-#define XOR_SELECT_TEMPLATE(FASTEST) (&xor_block_sse)
-
-#endif /* ASM_X86__XOR_64_H */
diff --git a/include/asm-xtensa/io.h b/include/asm-xtensa/io.h
index 47c3616..07b7299 100644
--- a/include/asm-xtensa/io.h
+++ b/include/asm-xtensa/io.h
@@ -18,10 +18,12 @@
 
 #include <linux/types.h>
 
-#define XCHAL_KIO_CACHED_VADDR	0xf0000000
-#define XCHAL_KIO_BYPASS_VADDR	0xf8000000
+#define XCHAL_KIO_CACHED_VADDR	0xe0000000
+#define XCHAL_KIO_BYPASS_VADDR	0xf0000000
 #define XCHAL_KIO_PADDR		0xf0000000
-#define XCHAL_KIO_SIZE		0x08000000
+#define XCHAL_KIO_SIZE		0x10000000
+
+#define IOADDR(x)		(XCHAL_KIO_BYPASS_VADDR + (x))
 
 /*
  * swap functions to change byte order from little-endian to big-endian and
diff --git a/include/asm-xtensa/rwsem.h b/include/asm-xtensa/rwsem.h
index 0aad3a5..e39edf5 100644
--- a/include/asm-xtensa/rwsem.h
+++ b/include/asm-xtensa/rwsem.h
@@ -13,6 +13,10 @@
 #ifndef _XTENSA_RWSEM_H
 #define _XTENSA_RWSEM_H
 
+#ifndef _LINUX_RWSEM_H
+#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
+#endif
+
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <asm/atomic.h>
diff --git a/include/asm-xtensa/variant-dc232b/core.h b/include/asm-xtensa/variant-dc232b/core.h
new file mode 100644
index 0000000..525bd3d
--- /dev/null
+++ b/include/asm-xtensa/variant-dc232b/core.h
@@ -0,0 +1,424 @@
+/*
+ * Xtensa processor core configuration information.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1999-2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_CONFIGURATION_H
+#define _XTENSA_CORE_CONFIGURATION_H
+
+
+/****************************************************************************
+	    Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ *  Note:  Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ *  configured, and a value of 0 otherwise.  These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+				ISA
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE			0	/* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED		1	/* windowed registers option */
+#define XCHAL_NUM_AREGS			32	/* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2		5	/* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE	3	/* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG		1	/* debug option */
+#define XCHAL_HAVE_DENSITY		1	/* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS		1	/* zero-overhead loops */
+#define XCHAL_HAVE_NSA			1	/* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX		1	/* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT			1	/* SEXT instruction */
+#define XCHAL_HAVE_CLAMPS		1	/* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16		1	/* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32		1	/* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH		0	/* MULUH/MULSH instructions */
+#define XCHAL_HAVE_DIV32		1	/* QUOS/QUOU/REMS/REMU instructions */
+#define XCHAL_HAVE_L32R			1	/* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS	1	/* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16		0	/* CONST16 instruction */
+#define XCHAL_HAVE_ADDX			1	/* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES	0	/* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES	0	/* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12		1	/* (obsolete option) */
+#define XCHAL_HAVE_ABS			1	/* ABS instruction */
+/*#define XCHAL_HAVE_POPC		0*/	/* POPC instruction */
+/*#define XCHAL_HAVE_CRC		0*/	/* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC		1	/* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I		1	/* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION		0	/* speculation */
+#define XCHAL_HAVE_FULL_RESET		1	/* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS		1	/* */
+#define XCHAL_NUM_MISC_REGS		2	/* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER		0	/* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID			1	/* processor ID register */
+#define XCHAL_HAVE_THREADPTR		1	/* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS		0	/* boolean registers */
+#define XCHAL_HAVE_CP			1	/* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG			8	/* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16		1	/* MAC16 package */
+#define XCHAL_HAVE_VECTORFPU2005	0	/* vector floating-point pkg */
+#define XCHAL_HAVE_FP			0	/* floating point pkg */
+#define XCHAL_HAVE_VECTRA1		0	/* Vectra I  pkg */
+#define XCHAL_HAVE_VECTRALX		0	/* Vectra LX pkg */
+#define XCHAL_HAVE_HIFI2		0	/* HiFi2 Audio Engine pkg */
+
+
+/*----------------------------------------------------------------------
+				MISC
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES	8	/* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH		4	/* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH		4	/* data width in bytes */
+/*  In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION	1	/* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION	1	/* unaligned stores cause exc.*/
+
+#define XCHAL_SW_VERSION		701001	/* sw version of this header */
+
+#define XCHAL_CORE_ID			"dc232b"	/* alphanum core name
+						   (CoreID) set in the Xtensa
+						   Processor Generator */
+
+#define XCHAL_CORE_DESCRIPTION		"Diamond 232L Standard Core Rev.B (LE)"
+#define XCHAL_BUILD_UNIQUE_ID		0x0000BEEF	/* 22-bit sw build ID */
+
+/*
+ *  These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0		0xC56307FE	/* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1		0x0D40BEEF	/* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME		"LX2.1.1"	/* full version name */
+#define XCHAL_HW_VERSION_MAJOR		2210	/* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR		1	/* minor ver# of targeted hw */
+#define XCHAL_HW_VERSION		221001	/* major*100+minor */
+#define XCHAL_HW_REL_LX2		1
+#define XCHAL_HW_REL_LX2_1		1
+#define XCHAL_HW_REL_LX2_1_1		1
+#define XCHAL_HW_CONFIGID_RELIABLE	1
+/*  If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR	2210	/* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR	1	/* minor v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION		221001	/* earliest targeted hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR	2210	/* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR	1	/* minor v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION		221001	/* latest targeted hw */
+
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE		32	/* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE		32	/* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH		5	/* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH		5	/* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE		16384	/* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE		16384	/* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK	1	/* writeback feature */
+
+
+
+
+/****************************************************************************
+    Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF			1	/* any outbound PIF present */
+
+/*  If present, cache size in bytes == (ways * 2^(linewidth + setwidth)).  */
+
+/*  Number of cache sets in log2(lines per way):  */
+#define XCHAL_ICACHE_SETWIDTH		7
+#define XCHAL_DCACHE_SETWIDTH		7
+
+/*  Cache set associativity (number of ways):  */
+#define XCHAL_ICACHE_WAYS		4
+#define XCHAL_DCACHE_WAYS		4
+
+/*  Cache features:  */
+#define XCHAL_ICACHE_LINE_LOCKABLE	1
+#define XCHAL_DCACHE_LINE_LOCKABLE	1
+#define XCHAL_ICACHE_ECC_PARITY		0
+#define XCHAL_DCACHE_ECC_PARITY		0
+
+/*  Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits):  */
+#define XCHAL_CA_BITS			4
+
+
+/*----------------------------------------------------------------------
+			INTERNAL I/D RAM/ROMs and XLMI
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_INSTROM		0	/* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM		0	/* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM		0	/* number of core data ROMs */
+#define XCHAL_NUM_DATARAM		0	/* number of core data RAMs */
+#define XCHAL_NUM_URAM			0	/* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI			0	/* number of core XLMI ports */
+
+
+/*----------------------------------------------------------------------
+			INTERRUPTS and TIMERS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS		1	/* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS	1	/* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI			1	/* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT		1	/* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS		3	/* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS		22	/* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2	5	/* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS		17	/* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS		6	/* number of interrupt levels
+						   (not including level zero) */
+#define XCHAL_EXCM_LEVEL		3	/* level masked by PS.EXCM */
+	/* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/*  Masks of interrupts at each interrupt level:  */
+#define XCHAL_INTLEVEL1_MASK		0x001F80FF
+#define XCHAL_INTLEVEL2_MASK		0x00000100
+#define XCHAL_INTLEVEL3_MASK		0x00200E00
+#define XCHAL_INTLEVEL4_MASK		0x00001000
+#define XCHAL_INTLEVEL5_MASK		0x00002000
+#define XCHAL_INTLEVEL6_MASK		0x00000000
+#define XCHAL_INTLEVEL7_MASK		0x00004000
+
+/*  Masks of interrupts at each range 1..n of interrupt levels:  */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK	0x001F80FF
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK	0x001F81FF
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK	0x003F8FFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK	0x003F9FFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK	0x003FBFFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK	0x003FBFFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK	0x003FFFFF
+
+/*  Level of each interrupt:  */
+#define XCHAL_INT0_LEVEL		1
+#define XCHAL_INT1_LEVEL		1
+#define XCHAL_INT2_LEVEL		1
+#define XCHAL_INT3_LEVEL		1
+#define XCHAL_INT4_LEVEL		1
+#define XCHAL_INT5_LEVEL		1
+#define XCHAL_INT6_LEVEL		1
+#define XCHAL_INT7_LEVEL		1
+#define XCHAL_INT8_LEVEL		2
+#define XCHAL_INT9_LEVEL		3
+#define XCHAL_INT10_LEVEL		3
+#define XCHAL_INT11_LEVEL		3
+#define XCHAL_INT12_LEVEL		4
+#define XCHAL_INT13_LEVEL		5
+#define XCHAL_INT14_LEVEL		7
+#define XCHAL_INT15_LEVEL		1
+#define XCHAL_INT16_LEVEL		1
+#define XCHAL_INT17_LEVEL		1
+#define XCHAL_INT18_LEVEL		1
+#define XCHAL_INT19_LEVEL		1
+#define XCHAL_INT20_LEVEL		1
+#define XCHAL_INT21_LEVEL		3
+#define XCHAL_DEBUGLEVEL		6	/* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT	1	/* OCD external db interrupt */
+#define XCHAL_NMILEVEL			7	/* NMI "level" (for use with
+						   EXCSAVE/EPS/EPC_n, RFI n) */
+
+/*  Type of each interrupt:  */
+#define XCHAL_INT0_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT3_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT7_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT8_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT9_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT10_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT11_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT12_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT13_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT14_TYPE 	XTHAL_INTTYPE_NMI
+#define XCHAL_INT15_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT16_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT17_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT18_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT19_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT20_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT21_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+
+/*  Masks of interrupts for each type of interrupt:  */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED	0xFFC00000
+#define XCHAL_INTTYPE_MASK_SOFTWARE	0x00000880
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE	0x003F8000
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL	0x0000133F
+#define XCHAL_INTTYPE_MASK_TIMER	0x00002440
+#define XCHAL_INTTYPE_MASK_NMI		0x00004000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR	0x00000000
+
+/*  Interrupt numbers assigned to specific interrupt sources:  */
+#define XCHAL_TIMER0_INTERRUPT		6	/* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT		10	/* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT		13	/* CCOMPARE2 */
+#define XCHAL_TIMER3_INTERRUPT		XTHAL_TIMER_UNCONFIGURED
+#define XCHAL_NMI_INTERRUPT		14	/* non-maskable interrupt */
+
+/*  Interrupt numbers for levels at which only one interrupt is configured:  */
+#define XCHAL_INTLEVEL2_NUM		8
+#define XCHAL_INTLEVEL4_NUM		12
+#define XCHAL_INTLEVEL5_NUM		13
+#define XCHAL_INTLEVEL7_NUM		14
+/*  (There are many interrupts each at level(s) 1, 3.)  */
+
+
+/*
+ *  External interrupt vectors/levels.
+ *  These macros describe how Xtensa processor interrupt numbers
+ *  (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ *  map to external BInterrupt<n> pins, for those interrupts
+ *  configured as external (level-triggered, edge-triggered, or NMI).
+ *  See the Xtensa processor databook for more details.
+ */
+
+/*  Core interrupt numbers mapped to each EXTERNAL interrupt number:  */
+#define XCHAL_EXTINT0_NUM		0	/* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM		1	/* (intlevel 1) */
+#define XCHAL_EXTINT2_NUM		2	/* (intlevel 1) */
+#define XCHAL_EXTINT3_NUM		3	/* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM		4	/* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM		5	/* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM		8	/* (intlevel 2) */
+#define XCHAL_EXTINT7_NUM		9	/* (intlevel 3) */
+#define XCHAL_EXTINT8_NUM		12	/* (intlevel 4) */
+#define XCHAL_EXTINT9_NUM		14	/* (intlevel 7) */
+#define XCHAL_EXTINT10_NUM		15	/* (intlevel 1) */
+#define XCHAL_EXTINT11_NUM		16	/* (intlevel 1) */
+#define XCHAL_EXTINT12_NUM		17	/* (intlevel 1) */
+#define XCHAL_EXTINT13_NUM		18	/* (intlevel 1) */
+#define XCHAL_EXTINT14_NUM		19	/* (intlevel 1) */
+#define XCHAL_EXTINT15_NUM		20	/* (intlevel 1) */
+#define XCHAL_EXTINT16_NUM		21	/* (intlevel 3) */
+
+
+/*----------------------------------------------------------------------
+			EXCEPTIONS and VECTORS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION		2	/* Xtensa Exception Architecture
+						   number: 1 == XEA1 (old)
+							   2 == XEA2 (new)
+							   0 == XEAX (extern) */
+#define XCHAL_HAVE_XEA1			0	/* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2			1	/* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX			0	/* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS		1	/* exception option */
+#define XCHAL_HAVE_MEM_ECC_PARITY	0	/* local memory ECC/parity */
+#define XCHAL_HAVE_VECTOR_SELECT	1	/* relocatable vectors */
+#define XCHAL_HAVE_VECBASE		1	/* relocatable vectors */
+#define XCHAL_VECBASE_RESET_VADDR	0xD0000000  /* VECBASE reset value */
+#define XCHAL_VECBASE_RESET_PADDR	0x00000000
+#define XCHAL_RESET_VECBASE_OVERLAP	0
+
+#define XCHAL_RESET_VECTOR0_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR0_PADDR	0xFE000000
+#define XCHAL_RESET_VECTOR1_VADDR	0xD8000500
+#define XCHAL_RESET_VECTOR1_PADDR	0x00000500
+#define XCHAL_RESET_VECTOR_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR_PADDR	0xFE000000
+#define XCHAL_USER_VECOFS		0x00000340
+#define XCHAL_USER_VECTOR_VADDR		0xD0000340
+#define XCHAL_USER_VECTOR_PADDR		0x00000340
+#define XCHAL_KERNEL_VECOFS		0x00000300
+#define XCHAL_KERNEL_VECTOR_VADDR	0xD0000300
+#define XCHAL_KERNEL_VECTOR_PADDR	0x00000300
+#define XCHAL_DOUBLEEXC_VECOFS		0x000003C0
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR	0xD00003C0
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR	0x000003C0
+#define XCHAL_WINDOW_OF4_VECOFS		0x00000000
+#define XCHAL_WINDOW_UF4_VECOFS		0x00000040
+#define XCHAL_WINDOW_OF8_VECOFS		0x00000080
+#define XCHAL_WINDOW_UF8_VECOFS		0x000000C0
+#define XCHAL_WINDOW_OF12_VECOFS	0x00000100
+#define XCHAL_WINDOW_UF12_VECOFS	0x00000140
+#define XCHAL_WINDOW_VECTORS_VADDR	0xD0000000
+#define XCHAL_WINDOW_VECTORS_PADDR	0x00000000
+#define XCHAL_INTLEVEL2_VECOFS		0x00000180
+#define XCHAL_INTLEVEL2_VECTOR_VADDR	0xD0000180
+#define XCHAL_INTLEVEL2_VECTOR_PADDR	0x00000180
+#define XCHAL_INTLEVEL3_VECOFS		0x000001C0
+#define XCHAL_INTLEVEL3_VECTOR_VADDR	0xD00001C0
+#define XCHAL_INTLEVEL3_VECTOR_PADDR	0x000001C0
+#define XCHAL_INTLEVEL4_VECOFS		0x00000200
+#define XCHAL_INTLEVEL4_VECTOR_VADDR	0xD0000200
+#define XCHAL_INTLEVEL4_VECTOR_PADDR	0x00000200
+#define XCHAL_INTLEVEL5_VECOFS		0x00000240
+#define XCHAL_INTLEVEL5_VECTOR_VADDR	0xD0000240
+#define XCHAL_INTLEVEL5_VECTOR_PADDR	0x00000240
+#define XCHAL_INTLEVEL6_VECOFS		0x00000280
+#define XCHAL_INTLEVEL6_VECTOR_VADDR	0xD0000280
+#define XCHAL_INTLEVEL6_VECTOR_PADDR	0x00000280
+#define XCHAL_DEBUG_VECOFS		XCHAL_INTLEVEL6_VECOFS
+#define XCHAL_DEBUG_VECTOR_VADDR	XCHAL_INTLEVEL6_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR	XCHAL_INTLEVEL6_VECTOR_PADDR
+#define XCHAL_NMI_VECOFS		0x000002C0
+#define XCHAL_NMI_VECTOR_VADDR		0xD00002C0
+#define XCHAL_NMI_VECTOR_PADDR		0x000002C0
+#define XCHAL_INTLEVEL7_VECOFS		XCHAL_NMI_VECOFS
+#define XCHAL_INTLEVEL7_VECTOR_VADDR	XCHAL_NMI_VECTOR_VADDR
+#define XCHAL_INTLEVEL7_VECTOR_PADDR	XCHAL_NMI_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+				DEBUG
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_OCD			1	/* OnChipDebug option */
+#define XCHAL_NUM_IBREAK		2	/* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK		2	/* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY	1	/* faster OCD option */
+
+
+/*----------------------------------------------------------------------
+				MMU
+  ----------------------------------------------------------------------*/
+
+/*  See core-matmap.h header file for more details.  */
+
+#define XCHAL_HAVE_TLBS			1	/* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY		0	/* one way maps I+D 4GB vaddr */
+#define XCHAL_HAVE_IDENTITY_MAP		0	/* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR		0	/* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR	0	/* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR	0	/* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU		1	/* full MMU (with page table
+						   [autorefill] and protection)
+						   usable for an MMU-based OS */
+/*  If none of the above last 4 are set, it's a custom TLB configuration.  */
+#define XCHAL_ITLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+#define XCHAL_DTLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+
+#define XCHAL_MMU_ASID_BITS		8	/* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS			4	/* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS		2	/* num of bits in RING field */
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
+
diff --git a/include/asm-xtensa/variant-dc232b/tie-asm.h b/include/asm-xtensa/variant-dc232b/tie-asm.h
new file mode 100644
index 0000000..ed4f53f
--- /dev/null
+++ b/include/asm-xtensa/variant-dc232b/tie-asm.h
@@ -0,0 +1,122 @@
+/*
+ * This header file contains assembly-language definitions (assembly
+ * macros, etc.) for this specific Xtensa processor's TIE extensions
+ * and options.  It is customized to this Xtensa processor configuration.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999-2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_TIE_ASM_H
+#define _XTENSA_CORE_TIE_ASM_H
+
+/*  Selection parameter values for save-area save/restore macros:  */
+/*  Option vs. TIE:  */
+#define XTHAL_SAS_TIE	0x0001	/* custom extension or coprocessor */
+#define XTHAL_SAS_OPT	0x0002	/* optional (and not a coprocessor) */
+/*  Whether used automatically by compiler:  */
+#define XTHAL_SAS_NOCC	0x0004	/* not used by compiler w/o special opts/code */
+#define XTHAL_SAS_CC	0x0008	/* used by compiler without special opts/code */
+/*  ABI handling across function calls:  */
+#define XTHAL_SAS_CALR	0x0010	/* caller-saved */
+#define XTHAL_SAS_CALE	0x0020	/* callee-saved */
+#define XTHAL_SAS_GLOB	0x0040	/* global across function calls (in thread) */
+/*  Misc  */
+#define XTHAL_SAS_ALL	0xFFFF	/* include all default NCP contents */
+
+
+
+/* Macro to save all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Save area ptr (clobbered):  ptr  (1 byte aligned)
+ * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_NCP_NUM_ATMPS needed)
+ */
+	.macro xchal_ncp_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
+	xchal_sa_start	\continue, \ofs
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-8, 4, 4
+	rsr	\at1, ACCLO		// MAC16 accumulator
+	rsr	\at2, ACCHI
+	s32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	s32i	\at2, \ptr, .Lxchal_ofs_ + 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.endif
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-16, 4, 4
+	rsr	\at1, M0		// MAC16 registers
+	rsr	\at2, M1
+	s32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	s32i	\at2, \ptr, .Lxchal_ofs_ + 4
+	rsr	\at1, M2
+	rsr	\at2, M3
+	s32i	\at1, \ptr, .Lxchal_ofs_ + 8
+	s32i	\at2, \ptr, .Lxchal_ofs_ + 12
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 16
+	.endif
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	rsr	\at1, SCOMPARE1		// conditional store option
+	s32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	rur	\at1, THREADPTR		// threadptr option
+	s32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.endm	// xchal_ncp_store
+
+/* Macro to save all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Save area ptr (clobbered):  ptr  (1 byte aligned)
+ * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_NCP_NUM_ATMPS needed)
+ */
+	.macro xchal_ncp_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
+	xchal_sa_start	\continue, \ofs
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-8, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	l32i	\at2, \ptr, .Lxchal_ofs_ + 4
+	wsr	\at1, ACCLO		// MAC16 accumulator
+	wsr	\at2, ACCHI
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.endif
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-16, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	l32i	\at2, \ptr, .Lxchal_ofs_ + 4
+	wsr	\at1, M0		// MAC16 registers
+	wsr	\at2, M1
+	l32i	\at1, \ptr, .Lxchal_ofs_ + 8
+	l32i	\at2, \ptr, .Lxchal_ofs_ + 12
+	wsr	\at1, M2
+	wsr	\at2, M3
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 16
+	.endif
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	wsr	\at1, SCOMPARE1		// conditional store option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	wur	\at1, THREADPTR		// threadptr option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.endm	// xchal_ncp_load
+
+
+
+#define XCHAL_NCP_NUM_ATMPS	2
+
+
+#define XCHAL_SA_NUM_ATMPS	2
+
+#endif /*_XTENSA_CORE_TIE_ASM_H*/
+
diff --git a/include/asm-xtensa/variant-dc232b/tie.h b/include/asm-xtensa/variant-dc232b/tie.h
new file mode 100644
index 0000000..018e81a
--- /dev/null
+++ b/include/asm-xtensa/variant-dc232b/tie.h
@@ -0,0 +1,131 @@
+/*
+ * This header file describes this specific Xtensa processor's TIE extensions
+ * that extend basic Xtensa core functionality.  It is customized to this
+ * Xtensa processor configuration.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999-2007 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_TIE_H
+#define _XTENSA_CORE_TIE_H
+
+#define XCHAL_CP_NUM			1	/* number of coprocessors */
+#define XCHAL_CP_MAX			8	/* max CP ID + 1 (0 if none) */
+#define XCHAL_CP_MASK			0x80	/* bitmask of all CPs by ID */
+#define XCHAL_CP_PORT_MASK		0x80	/* bitmask of only port CPs */
+
+/*  Basic parameters of each coprocessor:  */
+#define XCHAL_CP7_NAME			"XTIOP"
+#define XCHAL_CP7_IDENT			XTIOP
+#define XCHAL_CP7_SA_SIZE		0	/* size of state save area */
+#define XCHAL_CP7_SA_ALIGN		1	/* min alignment of save area */
+#define XCHAL_CP_ID_XTIOP		7	/* coprocessor ID (0..7) */
+
+/*  Filler info for unassigned coprocessors, to simplify arrays etc:  */
+#define XCHAL_CP0_SA_SIZE		0
+#define XCHAL_CP0_SA_ALIGN		1
+#define XCHAL_CP1_SA_SIZE		0
+#define XCHAL_CP1_SA_ALIGN		1
+#define XCHAL_CP2_SA_SIZE		0
+#define XCHAL_CP2_SA_ALIGN		1
+#define XCHAL_CP3_SA_SIZE		0
+#define XCHAL_CP3_SA_ALIGN		1
+#define XCHAL_CP4_SA_SIZE		0
+#define XCHAL_CP4_SA_ALIGN		1
+#define XCHAL_CP5_SA_SIZE		0
+#define XCHAL_CP5_SA_ALIGN		1
+#define XCHAL_CP6_SA_SIZE		0
+#define XCHAL_CP6_SA_ALIGN		1
+
+/*  Save area for non-coprocessor optional and custom (TIE) state:  */
+#define XCHAL_NCP_SA_SIZE		32
+#define XCHAL_NCP_SA_ALIGN		4
+
+/*  Total save area for optional and custom state (NCP + CPn):  */
+#define XCHAL_TOTAL_SA_SIZE		32	/* with 16-byte align padding */
+#define XCHAL_TOTAL_SA_ALIGN		4	/* actual minimum alignment */
+
+/*
+ * Detailed contents of save areas.
+ * NOTE:  caller must define the XCHAL_SA_REG macro (not defined here)
+ * before expanding the XCHAL_xxx_SA_LIST() macros.
+ *
+ * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
+ *		dbnum,base,regnum,bitsz,gapsz,reset,x...)
+ *
+ *	s = passed from XCHAL_*_LIST(s), eg. to select how to expand
+ *	ccused = set if used by compiler without special options or code
+ *	abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
+ *	kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
+ *	opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
+ *	name = lowercase reg name (no quotes)
+ *	galign = group byte alignment (power of 2) (galign >= align)
+ *	align = register byte alignment (power of 2)
+ *	asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
+ *	  (not including any pad bytes required to galign this or next reg)
+ *	dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
+ *	base = reg shortname w/o index (or sr=special, ur=TIE user reg)
+ *	regnum = reg index in regfile, or special/TIE-user reg number
+ *	bitsz = number of significant bits (regfile width, or ur/sr mask bits)
+ *	gapsz = intervening bits, if bitsz bits not stored contiguously
+ *	(padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
+ *	reset = register reset value (or 0 if undefined at reset)
+ *	x = reserved for future use (0 until then)
+ *
+ *  To filter out certain registers, e.g. to expand only the non-global
+ *  registers used by the compiler, you can do something like this:
+ *
+ *  #define XCHAL_SA_REG(s,ccused,p...)	SELCC##ccused(p)
+ *  #define SELCC0(p...)
+ *  #define SELCC1(abikind,p...)	SELAK##abikind(p)
+ *  #define SELAK0(p...)		REG(p)
+ *  #define SELAK1(p...)		REG(p)
+ *  #define SELAK2(p...)
+ *  #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
+ *		...what you want to expand...
+ */
+
+#define XCHAL_NCP_SA_NUM	8
+#define XCHAL_NCP_SA_LIST(s)	\
+ XCHAL_SA_REG(s,1,0,0,1,          acclo, 4, 4, 4,0x0210,  sr,16 , 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1,          acchi, 4, 4, 4,0x0211,  sr,17 ,  8,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m0, 4, 4, 4,0x0220,  sr,32 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m1, 4, 4, 4,0x0221,  sr,33 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m2, 4, 4, 4,0x0222,  sr,34 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m3, 4, 4, 4,0x0223,  sr,35 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,      scompare1, 4, 4, 4,0x020C,  sr,12 , 32,0,0,0) \
+ XCHAL_SA_REG(s,1,2,1,1,      threadptr, 4, 4, 4,0x03E7,  ur,231, 32,0,0,0)
+
+#define XCHAL_CP0_SA_NUM	0
+#define XCHAL_CP0_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP1_SA_NUM	0
+#define XCHAL_CP1_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP2_SA_NUM	0
+#define XCHAL_CP2_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP3_SA_NUM	0
+#define XCHAL_CP3_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP4_SA_NUM	0
+#define XCHAL_CP4_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP5_SA_NUM	0
+#define XCHAL_CP5_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP6_SA_NUM	0
+#define XCHAL_CP6_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP7_SA_NUM	0
+#define XCHAL_CP7_SA_LIST(s)	/* empty */
+
+/* Byte length of instruction from its first nibble (op0 field), per FLIX.  */
+#define XCHAL_OP0_FORMAT_LENGTHS	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3
+
+#endif /*_XTENSA_CORE_TIE_H*/
+
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 702f79d..fd6a452 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -94,18 +94,10 @@
 void acpi_table_print_madt_entry (struct acpi_subtable_header *madt);
 
 /* the following four functions are architecture-dependent */
-#ifdef CONFIG_HAVE_ARCH_PARSE_SRAT
-#define NR_NODE_MEMBLKS MAX_NUMNODES
-#define acpi_numa_slit_init(slit) do {} while (0)
-#define acpi_numa_processor_affinity_init(pa) do {} while (0)
-#define acpi_numa_memory_affinity_init(ma) do {} while (0)
-#define acpi_numa_arch_fixup() do {} while (0)
-#else
 void acpi_numa_slit_init (struct acpi_table_slit *slit);
 void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa);
 void acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
 void acpi_numa_arch_fixup(void);
-#endif
 
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
 /* Arch dependent functions for cpu hotplug support */
diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index 1abfe66..a08c33a 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -129,6 +129,7 @@
 extern int bitmap_find_free_region(unsigned long *bitmap, int bits, int order);
 extern void bitmap_release_region(unsigned long *bitmap, int pos, int order);
 extern int bitmap_allocate_region(unsigned long *bitmap, int pos, int order);
+extern void bitmap_copy_le(void *dst, const unsigned long *src, int nbits);
 
 #define BITMAP_LAST_WORD_MASK(nbits)					\
 (									\
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index b4fe68f..a135256 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -717,10 +717,10 @@
 extern void blk_plug_device_unlocked(struct request_queue *);
 extern int blk_remove_plug(struct request_queue *);
 extern void blk_recount_segments(struct request_queue *, struct bio *);
-extern int scsi_cmd_ioctl(struct file *, struct request_queue *,
-			  struct gendisk *, unsigned int, void __user *);
-extern int sg_scsi_ioctl(struct file *, struct request_queue *,
-		struct gendisk *, struct scsi_ioctl_command __user *);
+extern int scsi_cmd_ioctl(struct request_queue *, struct gendisk *, fmode_t,
+			  unsigned int, void __user *);
+extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t,
+			 struct scsi_ioctl_command __user *);
 
 /*
  * Temporary export, until SCSI gets fixed up.
@@ -910,7 +910,8 @@
 * command filter functions
 */
 extern int blk_verify_command(struct blk_cmd_filter *filter,
-			      unsigned char *cmd, int has_write_perm);
+			      unsigned char *cmd, fmode_t has_write_perm);
+extern void blk_unregister_filter(struct gendisk *disk);
 extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
 
 #define MAX_PHYS_SEGMENTS 128
@@ -1056,6 +1057,22 @@
 
 #endif /* CONFIG_BLK_DEV_INTEGRITY */
 
+struct block_device_operations {
+	int (*open) (struct block_device *, fmode_t);
+	int (*release) (struct gendisk *, fmode_t);
+	int (*locked_ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
+	int (*ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
+	int (*compat_ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
+	int (*direct_access) (struct block_device *, sector_t,
+						void **, unsigned long *);
+	int (*media_changed) (struct gendisk *);
+	int (*revalidate_disk) (struct gendisk *);
+	int (*getgeo)(struct block_device *, struct hd_geometry *);
+	struct module *owner;
+};
+
+extern int __blkdev_driver_ioctl(struct block_device *, fmode_t, unsigned int,
+				 unsigned long);
 #else /* CONFIG_BLOCK */
 /*
  * stubs for when the block layer is configured out
diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h
index 5db265e..0b49e08d 100644
--- a/include/linux/cdrom.h
+++ b/include/linux/cdrom.h
@@ -987,11 +987,11 @@
 };
 
 /* the general block_device operations structure: */
-extern int cdrom_open(struct cdrom_device_info *cdi, struct inode *ip,
-			struct file *fp);
-extern int cdrom_release(struct cdrom_device_info *cdi, struct file *fp);
-extern int cdrom_ioctl(struct file *file, struct cdrom_device_info *cdi,
-		struct inode *ip, unsigned int cmd, unsigned long arg);
+extern int cdrom_open(struct cdrom_device_info *cdi, struct block_device *bdev,
+			fmode_t mode);
+extern void cdrom_release(struct cdrom_device_info *cdi, fmode_t mode);
+extern int cdrom_ioctl(struct cdrom_device_info *cdi, struct block_device *bdev,
+		       fmode_t mode, unsigned int cmd, unsigned long arg);
 extern int cdrom_media_changed(struct cdrom_device_info *);
 
 extern int register_cdrom(struct cdrom_device_info *cdi);
diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h
index 0acf3b7..2dac064 100644
--- a/include/linux/crash_dump.h
+++ b/include/linux/crash_dump.h
@@ -14,8 +14,6 @@
 
 extern ssize_t copy_oldmem_page(unsigned long, char *, size_t,
 						unsigned long, int);
-extern const struct file_operations proc_vmcore_operations;
-extern struct proc_dir_entry *proc_vmcore;
 
 /* Architecture code defines this if there are other possible ELF
  * machine types, e.g. on bi-arch capable hardware. */
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index efba1de..a37359d 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -228,9 +228,9 @@
 
 /* allocate/de-allocate */
 extern struct dentry * d_alloc(struct dentry *, const struct qstr *);
-extern struct dentry * d_alloc_anon(struct inode *);
 extern struct dentry * d_splice_alias(struct inode *, struct dentry *);
 extern struct dentry * d_add_ci(struct dentry *, struct inode *, struct qstr *);
+extern struct dentry * d_obtain_alias(struct inode *);
 extern void shrink_dcache_sb(struct super_block *);
 extern void shrink_dcache_parent(struct dentry *);
 extern void shrink_dcache_for_umount(struct super_block *);
@@ -287,6 +287,7 @@
 
 /* used for rename() and baskets */
 extern void d_move(struct dentry *, struct dentry *);
+extern struct dentry *d_ancestor(struct dentry *, struct dentry *);
 
 /* appendix may either be NULL or be used for transname suffixes */
 extern struct dentry * d_lookup(struct dentry *, struct qstr *);
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 08d7835..c17fd33 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -69,8 +69,7 @@
 
 typedef int (*dm_message_fn) (struct dm_target *ti, unsigned argc, char **argv);
 
-typedef int (*dm_ioctl_fn) (struct dm_target *ti, struct inode *inode,
-			    struct file *filp, unsigned int cmd,
+typedef int (*dm_ioctl_fn) (struct dm_target *ti, unsigned int cmd,
 			    unsigned long arg);
 
 typedef int (*dm_merge_fn) (struct dm_target *ti, struct bvec_merge_data *bvm,
@@ -85,7 +84,7 @@
 
 struct dm_dev {
 	struct block_device *bdev;
-	int mode;
+	fmode_t mode;
 	char name[16];
 };
 
@@ -95,7 +94,7 @@
  * FIXME: too many arguments.
  */
 int dm_get_device(struct dm_target *ti, const char *path, sector_t start,
-		  sector_t len, int mode, struct dm_dev **result);
+		  sector_t len, fmode_t mode, struct dm_dev **result);
 void dm_put_device(struct dm_target *ti, struct dm_dev *d);
 
 /*
@@ -223,7 +222,7 @@
 /*
  * First create an empty table.
  */
-int dm_table_create(struct dm_table **result, int mode,
+int dm_table_create(struct dm_table **result, fmode_t mode,
 		    unsigned num_targets, struct mapped_device *md);
 
 /*
@@ -254,7 +253,7 @@
  */
 sector_t dm_table_get_size(struct dm_table *t);
 unsigned int dm_table_get_num_targets(struct dm_table *t);
-int dm_table_get_mode(struct dm_table *t);
+fmode_t dm_table_get_mode(struct dm_table *t);
 struct mapped_device *dm_table_get_md(struct dm_table *t);
 
 /*
@@ -354,6 +353,9 @@
  */
 #define dm_round_up(n, sz) (dm_div_up((n), (sz)) * (sz))
 
+#define dm_array_too_big(fixed, obj, num) \
+	((num) > (UINT_MAX - (fixed)) / (obj))
+
 static inline sector_t to_sector(unsigned long n)
 {
 	return (n >> SECTOR_SHIFT);
diff --git a/include/linux/device.h b/include/linux/device.h
index 987f591..1a3686d1 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -450,7 +450,7 @@
 }
 #endif
 
-static inline void *dev_get_drvdata(struct device *dev)
+static inline void *dev_get_drvdata(const struct device *dev)
 {
 	return dev->driver_data;
 }
diff --git a/include/linux/dm-region-hash.h b/include/linux/dm-region-hash.h
new file mode 100644
index 0000000..a9e652a
--- /dev/null
+++ b/include/linux/dm-region-hash.h
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2003 Sistina Software Limited.
+ * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
+ *
+ * Device-Mapper dirty region hash interface.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef DM_REGION_HASH_H
+#define DM_REGION_HASH_H
+
+#include <linux/dm-dirty-log.h>
+
+/*-----------------------------------------------------------------
+ * Region hash
+ *----------------------------------------------------------------*/
+struct dm_region_hash;
+struct dm_region;
+
+/*
+ * States a region can have.
+ */
+enum dm_rh_region_states {
+	DM_RH_CLEAN	 = 0x01,	/* No writes in flight. */
+	DM_RH_DIRTY	 = 0x02,	/* Writes in flight. */
+	DM_RH_NOSYNC	 = 0x04,	/* Out of sync. */
+	DM_RH_RECOVERING = 0x08,	/* Under resynchronization. */
+};
+
+/*
+ * Region hash create/destroy.
+ */
+struct bio_list;
+struct dm_region_hash *dm_region_hash_create(
+		void *context, void (*dispatch_bios)(void *context,
+						     struct bio_list *bios),
+		void (*wakeup_workers)(void *context),
+		void (*wakeup_all_recovery_waiters)(void *context),
+		sector_t target_begin, unsigned max_recovery,
+		struct dm_dirty_log *log, uint32_t region_size,
+		region_t nr_regions);
+void dm_region_hash_destroy(struct dm_region_hash *rh);
+
+struct dm_dirty_log *dm_rh_dirty_log(struct dm_region_hash *rh);
+
+/*
+ * Conversion functions.
+ */
+region_t dm_rh_bio_to_region(struct dm_region_hash *rh, struct bio *bio);
+sector_t dm_rh_region_to_sector(struct dm_region_hash *rh, region_t region);
+void *dm_rh_region_context(struct dm_region *reg);
+
+/*
+ * Get region size and key (ie. number of the region).
+ */
+sector_t dm_rh_get_region_size(struct dm_region_hash *rh);
+region_t dm_rh_get_region_key(struct dm_region *reg);
+
+/*
+ * Get/set/update region state (and dirty log).
+ *
+ */
+int dm_rh_get_state(struct dm_region_hash *rh, region_t region, int may_block);
+void dm_rh_set_state(struct dm_region_hash *rh, region_t region,
+		     enum dm_rh_region_states state, int may_block);
+
+/* Non-zero errors_handled leaves the state of the region NOSYNC */
+void dm_rh_update_states(struct dm_region_hash *rh, int errors_handled);
+
+/* Flush the region hash and dirty log. */
+int dm_rh_flush(struct dm_region_hash *rh);
+
+/* Inc/dec pending count on regions. */
+void dm_rh_inc_pending(struct dm_region_hash *rh, struct bio_list *bios);
+void dm_rh_dec(struct dm_region_hash *rh, region_t region);
+
+/* Delay bios on regions. */
+void dm_rh_delay(struct dm_region_hash *rh, struct bio *bio);
+
+void dm_rh_mark_nosync(struct dm_region_hash *rh,
+		       struct bio *bio, unsigned done, int error);
+
+/*
+ * Region recovery control.
+ */
+
+/* Prepare some regions for recovery by starting to quiesce them. */
+void dm_rh_recovery_prepare(struct dm_region_hash *rh);
+
+/* Try fetching a quiesced region for recovery. */
+struct dm_region *dm_rh_recovery_start(struct dm_region_hash *rh);
+
+/* Report recovery end on a region. */
+void dm_rh_recovery_end(struct dm_region *reg, int error);
+
+/* Returns number of regions with recovery work outstanding. */
+int dm_rh_recovery_in_flight(struct dm_region_hash *rh);
+
+/* Start/stop recovery. */
+void dm_rh_start_recovery(struct dm_region_hash *rh);
+void dm_rh_stop_recovery(struct dm_region_hash *rh);
+
+#endif /* DM_REGION_HASH_H */
diff --git a/include/linux/dma_remapping.h b/include/linux/dma_remapping.h
index bff5c65..952df39 100644
--- a/include/linux/dma_remapping.h
+++ b/include/linux/dma_remapping.h
@@ -2,15 +2,14 @@
 #define _DMA_REMAPPING_H
 
 /*
- * We need a fixed PAGE_SIZE of 4K irrespective of
- * arch PAGE_SIZE for IOMMU page tables.
+ * VT-d hardware uses 4KiB page size regardless of host page size.
  */
-#define PAGE_SHIFT_4K		(12)
-#define PAGE_SIZE_4K		(1UL << PAGE_SHIFT_4K)
-#define PAGE_MASK_4K		(((u64)-1) << PAGE_SHIFT_4K)
-#define PAGE_ALIGN_4K(addr)	(((addr) + PAGE_SIZE_4K - 1) & PAGE_MASK_4K)
+#define VTD_PAGE_SHIFT		(12)
+#define VTD_PAGE_SIZE		(1UL << VTD_PAGE_SHIFT)
+#define VTD_PAGE_MASK		(((u64)-1) << VTD_PAGE_SHIFT)
+#define VTD_PAGE_ALIGN(addr)	(((addr) + VTD_PAGE_SIZE - 1) & VTD_PAGE_MASK)
 
-#define IOVA_PFN(addr)		((addr) >> PAGE_SHIFT_4K)
+#define IOVA_PFN(addr)		((addr) >> PAGE_SHIFT)
 #define DMA_32BIT_PFN		IOVA_PFN(DMA_32BIT_MASK)
 #define DMA_64BIT_PFN		IOVA_PFN(DMA_64BIT_MASK)
 
@@ -25,7 +24,7 @@
 	u64	val;
 	u64	rsvd1;
 };
-#define ROOT_ENTRY_NR (PAGE_SIZE_4K/sizeof(struct root_entry))
+#define ROOT_ENTRY_NR (VTD_PAGE_SIZE/sizeof(struct root_entry))
 static inline bool root_present(struct root_entry *root)
 {
 	return (root->val & 1);
@@ -36,7 +35,7 @@
 }
 static inline void set_root_value(struct root_entry *root, unsigned long value)
 {
-	root->val |= value & PAGE_MASK_4K;
+	root->val |= value & VTD_PAGE_MASK;
 }
 
 struct context_entry;
@@ -45,7 +44,7 @@
 {
 	return (struct context_entry *)
 		(root_present(root)?phys_to_virt(
-		root->val & PAGE_MASK_4K):
+		root->val & VTD_PAGE_MASK) :
 		NULL);
 }
 
@@ -67,7 +66,7 @@
 #define context_present(c) ((c).lo & 1)
 #define context_fault_disable(c) (((c).lo >> 1) & 1)
 #define context_translation_type(c) (((c).lo >> 2) & 3)
-#define context_address_root(c) ((c).lo & PAGE_MASK_4K)
+#define context_address_root(c) ((c).lo & VTD_PAGE_MASK)
 #define context_address_width(c) ((c).hi &  7)
 #define context_domain_id(c) (((c).hi >> 8) & ((1 << 16) - 1))
 
@@ -81,7 +80,7 @@
 	} while (0)
 #define CONTEXT_TT_MULTI_LEVEL 0
 #define context_set_address_root(c, val) \
-	do {(c).lo |= (val) & PAGE_MASK_4K;} while (0)
+	do {(c).lo |= (val) & VTD_PAGE_MASK; } while (0)
 #define context_set_address_width(c, val) do {(c).hi |= (val) & 7;} while (0)
 #define context_set_domain_id(c, val) \
 	do {(c).hi |= ((val) & ((1 << 16) - 1)) << 8;} while (0)
@@ -107,9 +106,9 @@
 #define dma_set_pte_writable(p) do {(p).val |= DMA_PTE_WRITE;} while (0)
 #define dma_set_pte_prot(p, prot) \
 		do {(p).val = ((p).val & ~3) | ((prot) & 3); } while (0)
-#define dma_pte_addr(p) ((p).val & PAGE_MASK_4K)
+#define dma_pte_addr(p) ((p).val & VTD_PAGE_MASK)
 #define dma_set_pte_addr(p, addr) do {\
-		(p).val |= ((addr) & PAGE_MASK_4K); } while (0)
+		(p).val |= ((addr) & VTD_PAGE_MASK); } while (0)
 #define dma_pte_present(p) (((p).val & 3) != 0)
 
 struct intel_iommu;
diff --git a/include/linux/file.h b/include/linux/file.h
index a20259e..335a0a5 100644
--- a/include/linux/file.h
+++ b/include/linux/file.h
@@ -19,10 +19,10 @@
 struct vfsmount;
 struct dentry;
 extern int init_file(struct file *, struct vfsmount *mnt,
-		struct dentry *dentry, mode_t mode,
+		struct dentry *dentry, fmode_t mode,
 		const struct file_operations *fop);
 extern struct file *alloc_file(struct vfsmount *, struct dentry *dentry,
-		mode_t mode, const struct file_operations *fop);
+		fmode_t mode, const struct file_operations *fop);
 
 static inline void fput_light(struct file *file, int fput_needed)
 {
diff --git a/include/linux/fs.h b/include/linux/fs.h
index a6a625b..5b248d6 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -63,18 +63,23 @@
 #define MAY_ACCESS 16
 #define MAY_OPEN 32
 
-#define FMODE_READ 1
-#define FMODE_WRITE 2
+#define FMODE_READ ((__force fmode_t)1)
+#define FMODE_WRITE ((__force fmode_t)2)
 
 /* Internal kernel extensions */
-#define FMODE_LSEEK	4
-#define FMODE_PREAD	8
+#define FMODE_LSEEK	((__force fmode_t)4)
+#define FMODE_PREAD	((__force fmode_t)8)
 #define FMODE_PWRITE	FMODE_PREAD	/* These go hand in hand */
 
 /* File is being opened for execution. Primary users of this flag are
    distributed filesystems that can use it to achieve correct ETXTBUSY
    behavior for cross-node execution/opening_for_writing of files */
-#define FMODE_EXEC	16
+#define FMODE_EXEC	((__force fmode_t)16)
+
+#define FMODE_NDELAY	((__force fmode_t)32)
+#define FMODE_EXCL	((__force fmode_t)64)
+#define FMODE_WRITE_IOCTL	((__force fmode_t)128)
+#define FMODE_NDELAY_NOW	((__force fmode_t)256)
 
 #define RW_MASK		1
 #define RWA_MASK	2
@@ -136,7 +141,7 @@
 /*
  * Superblock flags that can be altered by MS_REMOUNT
  */
-#define MS_RMT_MASK	(MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK)
+#define MS_RMT_MASK	(MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION)
 
 /*
  * Old magic mount flag and mask
@@ -825,7 +830,7 @@
 	const struct file_operations	*f_op;
 	atomic_long_t		f_count;
 	unsigned int 		f_flags;
-	mode_t			f_mode;
+	fmode_t			f_mode;
 	loff_t			f_pos;
 	struct fown_struct	f_owner;
 	unsigned int		f_uid, f_gid;
@@ -1037,7 +1042,6 @@
 extern int lease_modify(struct file_lock **, int);
 extern int lock_may_read(struct inode *, loff_t start, unsigned long count);
 extern int lock_may_write(struct inode *, loff_t start, unsigned long count);
-extern struct seq_operations locks_seq_operations;
 #else /* !CONFIG_FILE_LOCKING */
 #define fcntl_getlk(a, b) ({ -EINVAL; })
 #define fcntl_setlk(a, b, c, d) ({ -EACCES; })
@@ -1152,6 +1156,7 @@
 	char s_id[32];				/* Informational name */
 
 	void 			*s_fs_info;	/* Filesystem private info */
+	fmode_t			s_mode;
 
 	/*
 	 * The next field is for VFS *only*. No filesystems have any business
@@ -1266,20 +1271,7 @@
  * to have different dirent layouts depending on the binary type.
  */
 typedef int (*filldir_t)(void *, const char *, int, loff_t, u64, unsigned);
-
-struct block_device_operations {
-	int (*open) (struct inode *, struct file *);
-	int (*release) (struct inode *, struct file *);
-	int (*ioctl) (struct inode *, struct file *, unsigned, unsigned long);
-	long (*unlocked_ioctl) (struct file *, unsigned, unsigned long);
-	long (*compat_ioctl) (struct file *, unsigned, unsigned long);
-	int (*direct_access) (struct block_device *, sector_t,
-						void **, unsigned long *);
-	int (*media_changed) (struct gendisk *);
-	int (*revalidate_disk) (struct gendisk *);
-	int (*getgeo)(struct block_device *, struct hd_geometry *);
-	struct module *owner;
-};
+struct block_device_operations;
 
 /* These macros are for out of kernel modules to test that
  * the kernel supports the unlocked_ioctl and compat_ioctl
@@ -1593,7 +1585,6 @@
 	struct vfsmount *mnt);
 extern int simple_set_mnt(struct vfsmount *mnt, struct super_block *sb);
 int __put_super_and_need_restart(struct super_block *sb);
-void unnamed_dev_init(void);
 
 /* Alas, no aliases. Too much hassle with bringing module.h everywhere */
 #define fops_get(fops) \
@@ -1714,7 +1705,7 @@
 extern void bd_set_size(struct block_device *, loff_t size);
 extern void bd_forget(struct inode *inode);
 extern void bdput(struct block_device *);
-extern struct block_device *open_by_devnum(dev_t, unsigned);
+extern struct block_device *open_by_devnum(dev_t, fmode_t);
 #else
 static inline void bd_forget(struct inode *inode) {}
 #endif
@@ -1724,13 +1715,10 @@
 extern const struct file_operations def_fifo_fops;
 #ifdef CONFIG_BLOCK
 extern int ioctl_by_bdev(struct block_device *, unsigned, unsigned long);
-extern int blkdev_ioctl(struct inode *, struct file *, unsigned, unsigned long);
-extern int blkdev_driver_ioctl(struct inode *inode, struct file *file,
-			       struct gendisk *disk, unsigned cmd,
-			       unsigned long arg);
+extern int blkdev_ioctl(struct block_device *, fmode_t, unsigned, unsigned long);
 extern long compat_blkdev_ioctl(struct file *, unsigned, unsigned long);
-extern int blkdev_get(struct block_device *, mode_t, unsigned);
-extern int blkdev_put(struct block_device *);
+extern int blkdev_get(struct block_device *, fmode_t);
+extern int blkdev_put(struct block_device *, fmode_t);
 extern int bd_claim(struct block_device *, void *);
 extern void bd_release(struct block_device *);
 #ifdef CONFIG_SYSFS
@@ -1761,9 +1749,10 @@
 extern const char *__bdevname(dev_t, char *buffer);
 extern const char *bdevname(struct block_device *bdev, char *buffer);
 extern struct block_device *lookup_bdev(const char *);
-extern struct block_device *open_bdev_excl(const char *, int, void *);
-extern void close_bdev_excl(struct block_device *);
+extern struct block_device *open_bdev_exclusive(const char *, fmode_t, void *);
+extern void close_bdev_exclusive(struct block_device *, fmode_t);
 extern void blkdev_show(struct seq_file *,off_t);
+
 #else
 #define BLKDEV_MAJOR_HASH_SIZE	0
 #endif
@@ -1852,6 +1841,11 @@
 extern int generic_permission(struct inode *, int,
 		int (*check_acl)(struct inode *, int));
 
+static inline bool execute_ok(struct inode *inode)
+{
+	return (inode->i_mode & S_IXUGO) || S_ISDIR(inode->i_mode);
+}
+
 extern int get_write_access(struct inode *);
 extern int deny_write_access(struct file *);
 static inline void put_write_access(struct inode * inode)
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index a895131..00fbd5b2 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -188,7 +188,7 @@
 	struct dentry *dentry = file->f_path.dentry;
 	struct inode *inode = dentry->d_inode;
 	const char *name = dentry->d_name.name;
-	mode_t mode = file->f_mode;
+	fmode_t mode = file->f_mode;
 	u32 mask = (mode & FMODE_WRITE) ? IN_CLOSE_WRITE : IN_CLOSE_NOWRITE;
 
 	if (S_ISDIR(inode->i_mode))
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 206cdf9..e439e6a 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -25,9 +25,6 @@
 extern struct kobject *block_depr;
 extern struct class block_class;
 
-extern const struct seq_operations partitions_op;
-extern const struct seq_operations diskstats_op;
-
 enum {
 /* These three have identical behaviour; use the second one if DOS FDISK gets
    confused about extended/logical partitions starting past cylinder 1023. */
diff --git a/include/linux/hid.h b/include/linux/hid.h
index f13bca2..5355ca4 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -417,6 +417,11 @@
 	struct input_dev *input;
 };
 
+enum hid_type {
+	HID_TYPE_OTHER = 0,
+	HID_TYPE_USBMOUSE
+};
+
 struct hid_driver;
 struct hid_ll_driver;
 
@@ -431,6 +436,7 @@
 	__u32 vendor;							/* Vendor ID */
 	__u32 product;							/* Product ID */
 	__u32 version;							/* HID version */
+	enum hid_type type;						/* device type (mouse, kbd, ...) */
 	unsigned country;						/* HID country */
 	struct hid_report_enum report_enum[HID_REPORT_TYPES];
 
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 9a4e35c..2b3645b 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -20,6 +20,8 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/wait.h>
+#include <linux/percpu.h>
+
 
 struct hrtimer_clock_base;
 struct hrtimer_cpu_base;
@@ -101,9 +103,14 @@
 /**
  * struct hrtimer - the basic hrtimer structure
  * @node:	red black tree node for time ordered insertion
- * @expires:	the absolute expiry time in the hrtimers internal
+ * @_expires:	the absolute expiry time in the hrtimers internal
  *		representation. The time is related to the clock on
- *		which the timer is based.
+ *		which the timer is based. Is setup by adding
+ *		slack to the _softexpires value. For non range timers
+ *		identical to _softexpires.
+ * @_softexpires: the absolute earliest expiry time of the hrtimer.
+ *		The time which was given as expiry time when the timer
+ *		was armed.
  * @function:	timer expiry callback function
  * @base:	pointer to the timer base (per cpu and per clock)
  * @state:	state information (See bit values above)
@@ -121,7 +128,8 @@
  */
 struct hrtimer {
 	struct rb_node			node;
-	ktime_t				expires;
+	ktime_t				_expires;
+	ktime_t				_softexpires;
 	enum hrtimer_restart		(*function)(struct hrtimer *);
 	struct hrtimer_clock_base	*base;
 	unsigned long			state;
@@ -201,6 +209,71 @@
 #endif
 };
 
+static inline void hrtimer_set_expires(struct hrtimer *timer, ktime_t time)
+{
+	timer->_expires = time;
+	timer->_softexpires = time;
+}
+
+static inline void hrtimer_set_expires_range(struct hrtimer *timer, ktime_t time, ktime_t delta)
+{
+	timer->_softexpires = time;
+	timer->_expires = ktime_add_safe(time, delta);
+}
+
+static inline void hrtimer_set_expires_range_ns(struct hrtimer *timer, ktime_t time, unsigned long delta)
+{
+	timer->_softexpires = time;
+	timer->_expires = ktime_add_safe(time, ns_to_ktime(delta));
+}
+
+static inline void hrtimer_set_expires_tv64(struct hrtimer *timer, s64 tv64)
+{
+	timer->_expires.tv64 = tv64;
+	timer->_softexpires.tv64 = tv64;
+}
+
+static inline void hrtimer_add_expires(struct hrtimer *timer, ktime_t time)
+{
+	timer->_expires = ktime_add_safe(timer->_expires, time);
+	timer->_softexpires = ktime_add_safe(timer->_softexpires, time);
+}
+
+static inline void hrtimer_add_expires_ns(struct hrtimer *timer, unsigned long ns)
+{
+	timer->_expires = ktime_add_ns(timer->_expires, ns);
+	timer->_softexpires = ktime_add_ns(timer->_softexpires, ns);
+}
+
+static inline ktime_t hrtimer_get_expires(const struct hrtimer *timer)
+{
+	return timer->_expires;
+}
+
+static inline ktime_t hrtimer_get_softexpires(const struct hrtimer *timer)
+{
+	return timer->_softexpires;
+}
+
+static inline s64 hrtimer_get_expires_tv64(const struct hrtimer *timer)
+{
+	return timer->_expires.tv64;
+}
+static inline s64 hrtimer_get_softexpires_tv64(const struct hrtimer *timer)
+{
+	return timer->_softexpires.tv64;
+}
+
+static inline s64 hrtimer_get_expires_ns(const struct hrtimer *timer)
+{
+	return ktime_to_ns(timer->_expires);
+}
+
+static inline ktime_t hrtimer_expires_remaining(const struct hrtimer *timer)
+{
+    return ktime_sub(timer->_expires, timer->base->get_time());
+}
+
 #ifdef CONFIG_HIGH_RES_TIMERS
 struct clock_event_device;
 
@@ -221,6 +294,8 @@
 	return timer->base->cpu_base->hres_active;
 }
 
+extern void hrtimer_peek_ahead_timers(void);
+
 /*
  * The resolution of the clocks. The resolution value is returned in
  * the clock_getres() system call to give application programmers an
@@ -243,6 +318,7 @@
  * is expired in the next softirq when the clock was advanced.
  */
 static inline void clock_was_set(void) { }
+static inline void hrtimer_peek_ahead_timers(void) { }
 
 static inline void hres_timers_resume(void) { }
 
@@ -264,6 +340,10 @@
 extern ktime_t ktime_get(void);
 extern ktime_t ktime_get_real(void);
 
+
+DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
+
+
 /* Exported timer functions: */
 
 /* Initialize timers: */
@@ -288,12 +368,25 @@
 /* Basic timer operations: */
 extern int hrtimer_start(struct hrtimer *timer, ktime_t tim,
 			 const enum hrtimer_mode mode);
+extern int hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
+			unsigned long range_ns, const enum hrtimer_mode mode);
 extern int hrtimer_cancel(struct hrtimer *timer);
 extern int hrtimer_try_to_cancel(struct hrtimer *timer);
 
+static inline int hrtimer_start_expires(struct hrtimer *timer,
+						enum hrtimer_mode mode)
+{
+	unsigned long delta;
+	ktime_t soft, hard;
+	soft = hrtimer_get_softexpires(timer);
+	hard = hrtimer_get_expires(timer);
+	delta = ktime_to_ns(ktime_sub(hard, soft));
+	return hrtimer_start_range_ns(timer, soft, delta, mode);
+}
+
 static inline int hrtimer_restart(struct hrtimer *timer)
 {
-	return hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS);
+	return hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
 }
 
 /* Query timers: */
@@ -350,6 +443,10 @@
 extern void hrtimer_init_sleeper(struct hrtimer_sleeper *sl,
 				 struct task_struct *tsk);
 
+extern int schedule_hrtimeout_range(ktime_t *expires, unsigned long delta,
+						const enum hrtimer_mode mode);
+extern int schedule_hrtimeout(ktime_t *expires, const enum hrtimer_mode mode);
+
 /* Soft interrupt function to run the hrtimer queues: */
 extern void hrtimer_run_queues(void);
 extern void hrtimer_run_pending(void);
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 32e0ef0..e1c8afc 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -27,7 +27,7 @@
 void __unmap_hugepage_range(struct vm_area_struct *,
 			unsigned long, unsigned long, struct page *);
 int hugetlb_prefault(struct address_space *, struct vm_area_struct *);
-int hugetlb_report_meminfo(char *);
+void hugetlb_report_meminfo(struct seq_file *);
 int hugetlb_report_node_meminfo(int, char *);
 unsigned long hugetlb_total_pages(void);
 int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
@@ -79,7 +79,9 @@
 #define copy_hugetlb_page_range(src, dst, vma)	({ BUG(); 0; })
 #define hugetlb_prefault(mapping, vma)		({ BUG(); 0; })
 #define unmap_hugepage_range(vma, start, end, page)	BUG()
-#define hugetlb_report_meminfo(buf)		0
+static inline void hugetlb_report_meminfo(struct seq_file *m)
+{
+}
 #define hugetlb_report_node_meminfo(n, buf)	0
 #define follow_huge_pmd(mm, addr, pmd, write)	NULL
 #define follow_huge_pud(mm, addr, pud, write)	NULL
diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h
index 0177d28..0f91a95 100644
--- a/include/linux/i2c-algo-pcf.h
+++ b/include/linux/i2c-algo-pcf.h
@@ -31,7 +31,10 @@
 	int  (*getpcf) (void *data, int ctl);
 	int  (*getown) (void *data);
 	int  (*getclock) (void *data);
-	void (*waitforpin) (void);
+	void (*waitforpin) (void *data);
+
+	void (*xfer_begin) (void *data);
+	void (*xfer_end) (void *data);
 
 	/* Multi-master lost arbitration back-off delay (msecs)
 	 * This should be set by the bus adapter or knowledgable client
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 0611512..33a5992 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -53,45 +53,44 @@
  * transmit one message at a time, a more complex version can be used to
  * transmit an arbitrary number of messages without interruption.
  */
-extern int i2c_master_send(struct i2c_client *,const char* ,int);
-extern int i2c_master_recv(struct i2c_client *,char* ,int);
+extern int i2c_master_send(struct i2c_client *client, const char *buf,
+			   int count);
+extern int i2c_master_recv(struct i2c_client *client, char *buf, int count);
 
 /* Transfer num messages.
  */
-extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num);
-
+extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			int num);
 
 /* This is the very generalized SMBus access routine. You probably do not
    want to use this, though; one of the functions below may be much easier,
    and probably just as fast.
    Note that we use i2c_adapter here, because you do not need a specific
    smbus adapter to call this function. */
-extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr,
-                           unsigned short flags,
-                           char read_write, u8 command, int size,
-                           union i2c_smbus_data * data);
+extern s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+			  unsigned short flags, char read_write, u8 command,
+			  int size, union i2c_smbus_data *data);
 
 /* Now follow the 'nice' access routines. These also document the calling
    conventions of i2c_smbus_xfer. */
 
-extern s32 i2c_smbus_read_byte(struct i2c_client * client);
-extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value);
-extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command);
-extern s32 i2c_smbus_write_byte_data(struct i2c_client * client,
-                                     u8 command, u8 value);
-extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command);
-extern s32 i2c_smbus_write_word_data(struct i2c_client * client,
-                                     u8 command, u16 value);
+extern s32 i2c_smbus_read_byte(struct i2c_client *client);
+extern s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value);
+extern s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command);
+extern s32 i2c_smbus_write_byte_data(struct i2c_client *client,
+				     u8 command, u8 value);
+extern s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command);
+extern s32 i2c_smbus_write_word_data(struct i2c_client *client,
+				     u8 command, u16 value);
 /* Returns the number of read bytes */
 extern s32 i2c_smbus_read_block_data(struct i2c_client *client,
 				     u8 command, u8 *values);
-extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
-				      u8 command, u8 length,
-				      const u8 *values);
+extern s32 i2c_smbus_write_block_data(struct i2c_client *client,
+				      u8 command, u8 length, const u8 *values);
 /* Returns the number of read bytes */
-extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
+extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client,
 					 u8 command, u8 length, u8 *values);
-extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
+extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client,
 					  u8 command, u8 length,
 					  const u8 *values);
 
@@ -169,7 +168,7 @@
 	/* a ioctl like command that can be used to perform specific functions
 	 * with the device.
 	 */
-	int (*command)(struct i2c_client *client,unsigned int cmd, void *arg);
+	int (*command)(struct i2c_client *client, unsigned int cmd, void *arg);
 
 	struct device_driver driver;
 	const struct i2c_device_id *id_table;
@@ -224,14 +223,14 @@
 	return to_i2c_client(dev);
 }
 
-static inline void *i2c_get_clientdata (struct i2c_client *dev)
+static inline void *i2c_get_clientdata(const struct i2c_client *dev)
 {
-	return dev_get_drvdata (&dev->dev);
+	return dev_get_drvdata(&dev->dev);
 }
 
-static inline void i2c_set_clientdata (struct i2c_client *dev, void *data)
+static inline void i2c_set_clientdata(struct i2c_client *dev, void *data)
 {
-	dev_set_drvdata (&dev->dev, data);
+	dev_set_drvdata(&dev->dev, data);
 }
 
 /**
@@ -240,6 +239,7 @@
  * @flags: to initialize i2c_client.flags
  * @addr: stored in i2c_client.addr
  * @platform_data: stored in i2c_client.dev.platform_data
+ * @archdata: copied into i2c_client.dev.archdata
  * @irq: stored in i2c_client.irq
  *
  * I2C doesn't actually support hardware probing, although controllers and
@@ -259,6 +259,7 @@
 	unsigned short	flags;
 	unsigned short	addr;
 	void		*platform_data;
+	struct dev_archdata	*archdata;
 	int		irq;
 };
 
@@ -272,7 +273,7 @@
  * fields (such as associated irq, or device-specific platform_data)
  * are provided using conventional syntax.
  */
-#define I2C_BOARD_INFO(dev_type,dev_addr) \
+#define I2C_BOARD_INFO(dev_type, dev_addr) \
 	.type = (dev_type), .addr = (dev_addr)
 
 
@@ -306,10 +307,12 @@
  */
 #ifdef CONFIG_I2C_BOARDINFO
 extern int
-i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned n);
+i2c_register_board_info(int busnum, struct i2c_board_info const *info,
+			unsigned n);
 #else
 static inline int
-i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned n)
+i2c_register_board_info(int busnum, struct i2c_board_info const *info,
+			unsigned n)
 {
 	return 0;
 }
@@ -328,11 +331,11 @@
 	   using common I2C messages */
 	/* master_xfer should return the number of messages successfully
 	   processed, or a negative value on error */
-	int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,
-	                   int num);
+	int (*master_xfer)(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			   int num);
 	int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
-	                   unsigned short flags, char read_write,
-	                   u8 command, int size, union i2c_smbus_data * data);
+			   unsigned short flags, char read_write,
+			   u8 command, int size, union i2c_smbus_data *data);
 
 	/* To determine what the adapter supports */
 	u32 (*functionality) (struct i2c_adapter *);
@@ -345,7 +348,7 @@
 struct i2c_adapter {
 	struct module *owner;
 	unsigned int id;
-	unsigned int class;
+	unsigned int class;		  /* classes to allow probing for */
 	const struct i2c_algorithm *algo; /* the algorithm to access the bus */
 	void *algo_data;
 
@@ -369,14 +372,14 @@
 };
 #define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
 
-static inline void *i2c_get_adapdata (struct i2c_adapter *dev)
+static inline void *i2c_get_adapdata(const struct i2c_adapter *dev)
 {
-	return dev_get_drvdata (&dev->dev);
+	return dev_get_drvdata(&dev->dev);
 }
 
-static inline void i2c_set_adapdata (struct i2c_adapter *dev, void *data)
+static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data)
 {
-	dev_set_drvdata (&dev->dev, data);
+	dev_set_drvdata(&dev->dev, data);
 }
 
 /*flags for the client struct: */
@@ -449,7 +452,7 @@
 		const struct i2c_client_address_data *address_data,
 		int (*found_proc) (struct i2c_adapter *, int, int));
 
-extern struct i2c_adapter* i2c_get_adapter(int id);
+extern struct i2c_adapter *i2c_get_adapter(int id);
 extern void i2c_put_adapter(struct i2c_adapter *adap);
 
 
@@ -465,7 +468,7 @@
 	return (func & i2c_get_functionality(adap)) == func;
 }
 
-/* Return id number for a specific adapter */
+/* Return the adapter number for a specific adapter */
 static inline int i2c_adapter_id(struct i2c_adapter *adap)
 {
 	return adap->nr;
@@ -526,7 +529,7 @@
 
 #define I2C_FUNC_I2C			0x00000001
 #define I2C_FUNC_10BIT_ADDR		0x00000002
-#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */
+#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* I2C_M_NOSTART etc. */
 #define I2C_FUNC_SMBUS_PEC		0x00000008
 #define I2C_FUNC_SMBUS_BLOCK_PROC_CALL	0x00008000 /* SMBus 2.0 */
 #define I2C_FUNC_SMBUS_QUICK		0x00010000
@@ -541,30 +544,26 @@
 #define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
 #define I2C_FUNC_SMBUS_READ_I2C_BLOCK	0x04000000 /* I2C-like block xfer  */
 #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK	0x08000000 /* w/ 1-byte reg. addr. */
-#define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2	 0x10000000 /* I2C-like block xfer  */
-#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2 0x20000000 /* w/ 2-byte reg. addr. */
 
-#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \
-                             I2C_FUNC_SMBUS_WRITE_BYTE)
-#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \
-                                  I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
-#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \
-                                  I2C_FUNC_SMBUS_WRITE_WORD_DATA)
-#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
-                                   I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
-#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
-                                  I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
-#define I2C_FUNC_SMBUS_I2C_BLOCK_2 (I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 | \
-                                    I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2)
+#define I2C_FUNC_SMBUS_BYTE		(I2C_FUNC_SMBUS_READ_BYTE | \
+					 I2C_FUNC_SMBUS_WRITE_BYTE)
+#define I2C_FUNC_SMBUS_BYTE_DATA	(I2C_FUNC_SMBUS_READ_BYTE_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
+#define I2C_FUNC_SMBUS_WORD_DATA	(I2C_FUNC_SMBUS_READ_WORD_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_WORD_DATA)
+#define I2C_FUNC_SMBUS_BLOCK_DATA	(I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
+#define I2C_FUNC_SMBUS_I2C_BLOCK	(I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
+					 I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
 
-#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \
-                             I2C_FUNC_SMBUS_BYTE | \
-                             I2C_FUNC_SMBUS_BYTE_DATA | \
-                             I2C_FUNC_SMBUS_WORD_DATA | \
-                             I2C_FUNC_SMBUS_PROC_CALL | \
-                             I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
-			     I2C_FUNC_SMBUS_I2C_BLOCK | \
-			     I2C_FUNC_SMBUS_PEC)
+#define I2C_FUNC_SMBUS_EMUL		(I2C_FUNC_SMBUS_QUICK | \
+					 I2C_FUNC_SMBUS_BYTE | \
+					 I2C_FUNC_SMBUS_BYTE_DATA | \
+					 I2C_FUNC_SMBUS_WORD_DATA | \
+					 I2C_FUNC_SMBUS_PROC_CALL | \
+					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
+					 I2C_FUNC_SMBUS_I2C_BLOCK | \
+					 I2C_FUNC_SMBUS_PEC)
 
 /*
  * Data for SMBus Messages
@@ -574,7 +573,7 @@
 	__u8 byte;
 	__u16 word;
 	__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
-	                       /* and one more for user-space compatibility */
+			       /* and one more for user-space compatibility */
 };
 
 /* i2c_smbus_xfer read or write markers */
@@ -602,21 +601,21 @@
 
 /* Default fill of many variables */
 #define I2C_CLIENT_DEFAULTS {I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END}
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END}
 
 /* I2C_CLIENT_MODULE_PARM creates a module parameter, and puts it in the
    module header */
@@ -625,7 +624,7 @@
   static unsigned short var[I2C_CLIENT_MAX_OPTS] = I2C_CLIENT_DEFAULTS; \
   static unsigned int var##_num; \
   module_param_array(var, short, &var##_num, 0); \
-  MODULE_PARM_DESC(var,desc)
+  MODULE_PARM_DESC(var, desc)
 
 #define I2C_CLIENT_MODULE_PARM_FORCE(name)				\
 I2C_CLIENT_MODULE_PARM(force_##name,					\
diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
index cdb4531..fb604dc 100644
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -228,6 +228,12 @@
 	int		gpio_base;
 	unsigned	irq_base, irq_end;
 
+	/* package the two LED signals as output-only GPIOs? */
+	bool		use_leds;
+
+	/* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */
+	u8		mmc_cd;
+
 	/* For gpio-N, bit (1 << N) in "pullups" is set if that pullup
 	 * should be enabled.  Else, if that bit is set in "pulldowns",
 	 * that pulldown is enabled.  Don't waste power by letting any
@@ -277,6 +283,8 @@
 
 /*----------------------------------------------------------------------*/
 
+int twl4030_sih_setup(int module);
+
 /*
  * FIXME completely stop using TWL4030_IRQ_BASE ... instead, pass the
  * IRQ data to subsidiary devices using platform device resources.
@@ -291,16 +299,16 @@
 #define TWL4030_MODIRQ_BCI		(TWL4030_IRQ_BASE + 2)
 #define TWL4030_MODIRQ_MADC		(TWL4030_IRQ_BASE + 3)
 /* #define TWL4030_MODIRQ_USB		(TWL4030_IRQ_BASE + 4) */
-#define TWL4030_MODIRQ_PWR		(TWL4030_IRQ_BASE + 5)
+/* #define TWL4030_MODIRQ_PWR		(TWL4030_IRQ_BASE + 5) */
 
 #define TWL4030_PWRIRQ_PWRBTN		(TWL4030_PWR_IRQ_BASE + 0)
-#define TWL4030_PWRIRQ_CHG_PRES		(TWL4030_PWR_IRQ_BASE + 1)
-#define TWL4030_PWRIRQ_USB_PRES		(TWL4030_PWR_IRQ_BASE + 2)
-#define TWL4030_PWRIRQ_RTC		(TWL4030_PWR_IRQ_BASE + 3)
-#define TWL4030_PWRIRQ_HOT_DIE		(TWL4030_PWR_IRQ_BASE + 4)
-#define TWL4030_PWRIRQ_PWROK_TIMEOUT	(TWL4030_PWR_IRQ_BASE + 5)
-#define TWL4030_PWRIRQ_MBCHG		(TWL4030_PWR_IRQ_BASE + 6)
-#define TWL4030_PWRIRQ_SC_DETECT	(TWL4030_PWR_IRQ_BASE + 7)
+/* #define TWL4030_PWRIRQ_CHG_PRES		(TWL4030_PWR_IRQ_BASE + 1) */
+/* #define TWL4030_PWRIRQ_USB_PRES		(TWL4030_PWR_IRQ_BASE + 2) */
+/* #define TWL4030_PWRIRQ_RTC		(TWL4030_PWR_IRQ_BASE + 3) */
+/* #define TWL4030_PWRIRQ_HOT_DIE		(TWL4030_PWR_IRQ_BASE + 4) */
+/* #define TWL4030_PWRIRQ_PWROK_TIMEOUT	(TWL4030_PWR_IRQ_BASE + 5) */
+/* #define TWL4030_PWRIRQ_MBCHG		(TWL4030_PWR_IRQ_BASE + 6) */
+/* #define TWL4030_PWRIRQ_SC_DETECT	(TWL4030_PWR_IRQ_BASE + 7) */
 
 /* Rest are unsued currently*/
 
@@ -317,17 +325,13 @@
 /* TWL4030 GPIO interrupt definitions */
 
 #define TWL4030_GPIO_IRQ_NO(n)		(TWL4030_GPIO_IRQ_BASE + (n))
-#define TWL4030_GPIO_IS_ENABLE		1
 
 /*
  * Exported TWL4030 GPIO APIs
  *
  * WARNING -- use standard GPIO and IRQ calls instead; these will vanish.
  */
-int twl4030_get_gpio_datain(int gpio);
-int twl4030_request_gpio(int gpio);
 int twl4030_set_gpio_debounce(int gpio, int enable);
-int twl4030_free_gpio(int gpio);
 
 #if defined(CONFIG_TWL4030_BCI_BATTERY) || \
 	defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)
diff --git a/include/linux/i7300_idle.h b/include/linux/i7300_idle.h
new file mode 100644
index 0000000..05a80c4
--- /dev/null
+++ b/include/linux/i7300_idle.h
@@ -0,0 +1,83 @@
+
+#ifndef I7300_IDLE_H
+#define I7300_IDLE_H
+
+#include <linux/pci.h>
+
+/*
+ * I/O AT controls (PCI bus 0 device 8 function 0)
+ * DIMM controls (PCI bus 0 device 16 function 1)
+ */
+#define IOAT_BUS 0
+#define IOAT_DEVFN PCI_DEVFN(8, 0)
+#define MEMCTL_BUS 0
+#define MEMCTL_DEVFN PCI_DEVFN(16, 1)
+
+struct fbd_ioat {
+	unsigned int vendor;
+	unsigned int ioat_dev;
+};
+
+/*
+ * The i5000 chip-set has the same hooks as the i7300
+ * but support is disabled by default because this driver
+ * has not been validated on that platform.
+ */
+#define SUPPORT_I5000 0
+
+static const struct fbd_ioat fbd_ioat_list[] = {
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB},
+#if SUPPORT_I5000
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT},
+#endif
+	{0, 0}
+};
+
+/* table of devices that work with this driver */
+static const struct pci_device_id pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) },
+#if SUPPORT_I5000
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
+#endif
+	{ } /* Terminating entry */
+};
+
+/* Check for known platforms with I/O-AT */
+static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev,
+						struct pci_dev **ioat_dev)
+{
+	int i;
+	struct pci_dev *memdev, *dmadev;
+
+	memdev = pci_get_bus_and_slot(MEMCTL_BUS, MEMCTL_DEVFN);
+	if (!memdev)
+		return -ENODEV;
+
+	for (i = 0; pci_tbl[i].vendor != 0; i++) {
+		if (memdev->vendor == pci_tbl[i].vendor &&
+		    memdev->device == pci_tbl[i].device) {
+			break;
+		}
+	}
+	if (pci_tbl[i].vendor == 0)
+		return -ENODEV;
+
+	dmadev = pci_get_bus_and_slot(IOAT_BUS, IOAT_DEVFN);
+	if (!dmadev)
+		return -ENODEV;
+
+	for (i = 0; fbd_ioat_list[i].vendor != 0; i++) {
+		if (dmadev->vendor == fbd_ioat_list[i].vendor &&
+		    dmadev->device == fbd_ioat_list[i].ioat_dev) {
+			if (fbd_dev)
+				*fbd_dev = memdev;
+			if (ioat_dev)
+				*ioat_dev = dmadev;
+
+			return 0;
+		}
+	}
+	return -ENODEV;
+}
+
+#endif
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 89e53cf..54525be 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -474,8 +474,8 @@
 	ide_startstop_t	(*do_request)(struct ide_drive_s *, struct request *,
 				      sector_t);
 	int		(*end_request)(struct ide_drive_s *, int, int);
-	int		(*ioctl)(struct ide_drive_s *, struct inode *,
-				 struct file *, unsigned int, unsigned long);
+	int		(*ioctl)(struct ide_drive_s *, struct block_device *,
+				 fmode_t, unsigned int, unsigned long);
 };
 
 /* ATAPI device flags */
@@ -1158,8 +1158,7 @@
 int ide_setting_ioctl(ide_drive_t *, struct block_device *, unsigned int,
 		      unsigned long, const struct ide_ioctl_devset *);
 
-int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *,
-		      unsigned, unsigned long);
+int generic_ide_ioctl(ide_drive_t *, struct block_device *, unsigned, unsigned long);
 
 extern int ide_vlb_clk;
 extern int ide_pci_clk;
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 021d8e7..23fd890 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -170,6 +170,7 @@
 	.cpu_timers	= INIT_CPU_TIMERS(tsk.cpu_timers),		\
 	.fs_excl	= ATOMIC_INIT(0),				\
 	.pi_lock	= __SPIN_LOCK_UNLOCKED(tsk.pi_lock),		\
+	.timer_slack_ns = 50000, /* 50 usec default slack */		\
 	.pids = {							\
 		[PIDTYPE_PID]  = INIT_PID_LINK(PIDTYPE_PID),		\
 		[PIDTYPE_PGID] = INIT_PID_LINK(PIDTYPE_PGID),		\
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index 2e117f3..3d017cf 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -29,6 +29,7 @@
 #include <linux/io.h>
 #include <linux/dma_remapping.h>
 #include <asm/cacheflush.h>
+#include <asm/iommu.h>
 
 /*
  * Intel IOMMU register specification per version 1.0 public spec.
@@ -127,6 +128,7 @@
 
 
 /* IOTLB_REG */
+#define DMA_TLB_FLUSH_GRANU_OFFSET  60
 #define DMA_TLB_GLOBAL_FLUSH (((u64)1) << 60)
 #define DMA_TLB_DSI_FLUSH (((u64)2) << 60)
 #define DMA_TLB_PSI_FLUSH (((u64)3) << 60)
@@ -140,6 +142,7 @@
 #define DMA_TLB_MAX_SIZE (0x3f)
 
 /* INVALID_DESC */
+#define DMA_CCMD_INVL_GRANU_OFFSET  61
 #define DMA_ID_TLB_GLOBAL_FLUSH	(((u64)1) << 3)
 #define DMA_ID_TLB_DSI_FLUSH	(((u64)2) << 3)
 #define DMA_ID_TLB_PSI_FLUSH	(((u64)3) << 3)
@@ -200,22 +203,21 @@
 #define dma_frcd_type(d) ((d >> 30) & 1)
 #define dma_frcd_fault_reason(c) (c & 0xff)
 #define dma_frcd_source_id(c) (c & 0xffff)
-#define dma_frcd_page_addr(d) (d & (((u64)-1) << 12)) /* low 64 bit */
+/* low 64 bit */
+#define dma_frcd_page_addr(d) (d & (((u64)-1) << PAGE_SHIFT))
 
-#define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000) /* 10sec */
-
-#define IOMMU_WAIT_OP(iommu, offset, op, cond, sts) \
-{\
-	cycles_t start_time = get_cycles();\
-	while (1) {\
-		sts = op (iommu->reg + offset);\
-		if (cond)\
-			break;\
+#define IOMMU_WAIT_OP(iommu, offset, op, cond, sts)			\
+do {									\
+	cycles_t start_time = get_cycles();				\
+	while (1) {							\
+		sts = op(iommu->reg + offset);				\
+		if (cond)						\
+			break;						\
 		if (DMAR_OPERATION_TIMEOUT < (get_cycles() - start_time))\
-			panic("DMAR hardware is malfunctioning\n");\
-		cpu_relax();\
-	}\
-}
+			panic("DMAR hardware is malfunctioning\n");	\
+		cpu_relax();						\
+	}								\
+} while (0)
 
 #define QI_LENGTH	256	/* queue length */
 
@@ -238,6 +240,19 @@
 #define QI_IWD_STATUS_DATA(d)	(((u64)d) << 32)
 #define QI_IWD_STATUS_WRITE	(((u64)1) << 5)
 
+#define QI_IOTLB_DID(did) 	(((u64)did) << 16)
+#define QI_IOTLB_DR(dr) 	(((u64)dr) << 7)
+#define QI_IOTLB_DW(dw) 	(((u64)dw) << 6)
+#define QI_IOTLB_GRAN(gran) 	(((u64)gran) >> (DMA_TLB_FLUSH_GRANU_OFFSET-4))
+#define QI_IOTLB_ADDR(addr)	(((u64)addr) & VTD_PAGE_MASK)
+#define QI_IOTLB_IH(ih)		(((u64)ih) << 6)
+#define QI_IOTLB_AM(am)		(((u8)am))
+
+#define QI_CC_FM(fm)		(((u64)fm) << 48)
+#define QI_CC_SID(sid)		(((u64)sid) << 32)
+#define QI_CC_DID(did)		(((u64)did) << 16)
+#define QI_CC_GRAN(gran)	(((u64)gran) >> (DMA_CCMD_INVL_GRANU_OFFSET-4))
+
 struct qi_desc {
 	u64 low, high;
 };
@@ -263,6 +278,13 @@
 };
 #endif
 
+struct iommu_flush {
+	int (*flush_context)(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm,
+		u64 type, int non_present_entry_flush);
+	int (*flush_iotlb)(struct intel_iommu *iommu, u16 did, u64 addr,
+		unsigned int size_order, u64 type, int non_present_entry_flush);
+};
+
 struct intel_iommu {
 	void __iomem	*reg; /* Pointer to hardware regs, virtual addr */
 	u64		cap;
@@ -282,6 +304,7 @@
 	unsigned char name[7];    /* Device Name */
 	struct msi_msg saved_msg;
 	struct sys_device sysdev;
+	struct iommu_flush flush;
 #endif
 	struct q_inval  *qi;            /* Queued invalidation info */
 #ifdef CONFIG_INTR_REMAP
@@ -303,6 +326,12 @@
 extern int dmar_enable_qi(struct intel_iommu *iommu);
 extern void qi_global_iec(struct intel_iommu *iommu);
 
+extern int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid,
+			        u8 fm, u64 type, int non_present_entry_flush);
+extern int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
+			  unsigned int size_order, u64 type,
+			  int non_present_entry_flush);
+
 extern void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
 
 void intel_iommu_domain_exit(struct dmar_domain *domain);
@@ -324,4 +353,11 @@
 }
 #endif /* CONFIG_DMAR */
 
+extern void *intel_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t);
+extern void intel_free_coherent(struct device *, size_t, void *, dma_addr_t);
+extern dma_addr_t intel_map_single(struct device *, phys_addr_t, size_t, int);
+extern void intel_unmap_single(struct device *, dma_addr_t, size_t, int);
+extern int intel_map_sg(struct device *, struct scatterlist *, int, int);
+extern void intel_unmap_sg(struct device *, struct scatterlist *, int, int);
+
 #endif
diff --git a/include/linux/irqnr.h b/include/linux/irqnr.h
index 3171ddc..452c280 100644
--- a/include/linux/irqnr.h
+++ b/include/linux/irqnr.h
@@ -13,9 +13,9 @@
 # define for_each_irq_desc(irq, desc)		\
 	for (irq = 0, desc = irq_desc; irq < nr_irqs; irq++, desc++)
 
-# define for_each_irq_desc_reverse(irq, desc)			\
-	for (irq = nr_irqs -1, desc = irq_desc + (nr_irqs -1 );	\
-	     irq > 0; irq--, desc--)
+# define for_each_irq_desc_reverse(irq, desc)				\
+	for (irq = nr_irqs - 1, desc = irq_desc + (nr_irqs - 1);	\
+	     irq >= 0; irq--, desc--)
 #endif
 
 #define for_each_irq_nr(irq)			\
diff --git a/include/linux/jbd.h b/include/linux/jbd.h
index 35d4f63..346e2b80 100644
--- a/include/linux/jbd.h
+++ b/include/linux/jbd.h
@@ -911,7 +911,7 @@
 		   (journal_t *, unsigned long, unsigned long, unsigned long);
 extern int	   journal_create     (journal_t *);
 extern int	   journal_load       (journal_t *journal);
-extern void	   journal_destroy    (journal_t *);
+extern int	   journal_destroy    (journal_t *);
 extern int	   journal_recover    (journal_t *journal);
 extern int	   journal_wipe       (journal_t *, int);
 extern int	   journal_skip_recovery	(journal_t *);
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 94d17ff..396a350 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -191,6 +191,30 @@
 struct pid;
 extern struct pid *session_of_pgrp(struct pid *pgrp);
 
+/*
+ * FW_BUG
+ * Add this to a message where you are sure the firmware is buggy or behaves
+ * really stupid or out of spec. Be aware that the responsible BIOS developer
+ * should be able to fix this issue or at least get a concrete idea of the
+ * problem by reading your message without the need of looking at the kernel
+ * code.
+ * 
+ * Use it for definite and high priority BIOS bugs.
+ *
+ * FW_WARN
+ * Use it for not that clear (e.g. could the kernel messed up things already?)
+ * and medium priority BIOS bugs.
+ *
+ * FW_INFO
+ * Use this one if you want to tell the user or vendor about something
+ * suspicious, but generally harmless related to the firmware.
+ *
+ * Use it for information or very low priority BIOS bugs.
+ */
+#define FW_BUG		"[Firmware Bug]: "
+#define FW_WARN		"[Firmware Warn]: "
+#define FW_INFO		"[Firmware Info]: "
+
 #ifdef CONFIG_PRINTK
 asmlinkage int vprintk(const char *fmt, va_list args)
 	__attribute__ ((format (printf, 1, 0)));
diff --git a/include/linux/leds.h b/include/linux/leds.h
index d41ccb5..d3a73f5 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -123,7 +123,7 @@
  */
 struct led_info {
 	const char	*name;
-	char		*default_trigger;
+	const char	*default_trigger;
 	int		flags;
 };
 
@@ -135,7 +135,7 @@
 /* For the leds-gpio driver */
 struct gpio_led {
 	const char *name;
-	char *default_trigger;
+	const char *default_trigger;
 	unsigned 	gpio;
 	u8 		active_low;
 };
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 947cf84..507f53e 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -340,6 +340,9 @@
 
 	ATA_EHI_DID_RESET	= ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET,
 
+	/* mask of flags to transfer *to* the slave link */
+	ATA_EHI_TO_SLAVE_MASK	= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET,
+
 	/* max tries if error condition is still set after ->error_handler */
 	ATA_EH_MAX_TRIES	= 5,
 
@@ -692,7 +695,6 @@
 	unsigned int		cbl;	/* cable type; ATA_CBL_xxx */
 
 	struct ata_queued_cmd	qcmd[ATA_MAX_QUEUE];
-	unsigned long		qc_allocated;
 	unsigned int		qc_active;
 	int			nr_active_links; /* #links with active qcs */
 
diff --git a/include/linux/mlx4/cmd.h b/include/linux/mlx4/cmd.h
index 77323a7..cf9c679 100644
--- a/include/linux/mlx4/cmd.h
+++ b/include/linux/mlx4/cmd.h
@@ -132,6 +132,15 @@
 	MLX4_MAILBOX_SIZE	=  4096
 };
 
+enum {
+	/* set port opcode modifiers */
+	MLX4_SET_PORT_GENERAL   = 0x0,
+	MLX4_SET_PORT_RQP_CALC  = 0x1,
+	MLX4_SET_PORT_MAC_TABLE = 0x2,
+	MLX4_SET_PORT_VLAN_TABLE = 0x3,
+	MLX4_SET_PORT_PRIO_MAP  = 0x4,
+};
+
 struct mlx4_dev;
 
 struct mlx4_cmd_mailbox {
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index b2f9444..bd9977b 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -60,6 +60,7 @@
 	MLX4_DEV_CAP_FLAG_IPOIB_CSUM	= 1 <<  7,
 	MLX4_DEV_CAP_FLAG_BAD_PKEY_CNTR	= 1 <<  8,
 	MLX4_DEV_CAP_FLAG_BAD_QKEY_CNTR	= 1 <<  9,
+	MLX4_DEV_CAP_FLAG_DPDP		= 1 << 12,
 	MLX4_DEV_CAP_FLAG_MEM_WINDOW	= 1 << 16,
 	MLX4_DEV_CAP_FLAG_APM		= 1 << 17,
 	MLX4_DEV_CAP_FLAG_ATOMIC	= 1 << 18,
@@ -145,6 +146,29 @@
 	MLX4_MTT_FLAG_PRESENT		= 1
 };
 
+enum mlx4_qp_region {
+	MLX4_QP_REGION_FW = 0,
+	MLX4_QP_REGION_ETH_ADDR,
+	MLX4_QP_REGION_FC_ADDR,
+	MLX4_QP_REGION_FC_EXCH,
+	MLX4_NUM_QP_REGION
+};
+
+enum mlx4_port_type {
+	MLX4_PORT_TYPE_IB	= 1 << 0,
+	MLX4_PORT_TYPE_ETH	= 1 << 1,
+};
+
+enum mlx4_special_vlan_idx {
+	MLX4_NO_VLAN_IDX        = 0,
+	MLX4_VLAN_MISS_IDX,
+	MLX4_VLAN_REGULAR
+};
+
+enum {
+	MLX4_NUM_FEXCH          = 64 * 1024,
+};
+
 static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor)
 {
 	return (major << 32) | (minor << 16) | subminor;
@@ -154,7 +178,9 @@
 	u64			fw_ver;
 	int			num_ports;
 	int			vl_cap[MLX4_MAX_PORTS + 1];
-	int			mtu_cap[MLX4_MAX_PORTS + 1];
+	int			ib_mtu_cap[MLX4_MAX_PORTS + 1];
+	u64			def_mac[MLX4_MAX_PORTS + 1];
+	int			eth_mtu_cap[MLX4_MAX_PORTS + 1];
 	int			gid_table_len[MLX4_MAX_PORTS + 1];
 	int			pkey_table_len[MLX4_MAX_PORTS + 1];
 	int			local_ca_ack_delay;
@@ -169,7 +195,6 @@
 	int			max_rq_desc_sz;
 	int			max_qp_init_rdma;
 	int			max_qp_dest_rdma;
-	int			reserved_qps;
 	int			sqp_start;
 	int			num_srqs;
 	int			max_srq_wqes;
@@ -201,6 +226,15 @@
 	u16			stat_rate_support;
 	u8			port_width_cap[MLX4_MAX_PORTS + 1];
 	int			max_gso_sz;
+	int                     reserved_qps_cnt[MLX4_NUM_QP_REGION];
+	int			reserved_qps;
+	int                     reserved_qps_base[MLX4_NUM_QP_REGION];
+	int                     log_num_macs;
+	int                     log_num_vlans;
+	int                     log_num_prios;
+	enum mlx4_port_type	port_type[MLX4_MAX_PORTS + 1];
+	u8			supported_type[MLX4_MAX_PORTS + 1];
+	u32			port_mask;
 };
 
 struct mlx4_buf_list {
@@ -355,6 +389,11 @@
 	u64			si_guid;
 };
 
+#define mlx4_foreach_port(port, dev, type)				\
+	for ((port) = 1; (port) <= (dev)->caps.num_ports; (port)++)	\
+		if (((type) == MLX4_PORT_TYPE_IB ? (dev)->caps.port_mask : \
+		     ~(dev)->caps.port_mask) & 1 << ((port) - 1))
+
 int mlx4_buf_alloc(struct mlx4_dev *dev, int size, int max_direct,
 		   struct mlx4_buf *buf);
 void mlx4_buf_free(struct mlx4_dev *dev, int size, struct mlx4_buf *buf);
@@ -400,7 +439,10 @@
 		  int collapsed);
 void mlx4_cq_free(struct mlx4_dev *dev, struct mlx4_cq *cq);
 
-int mlx4_qp_alloc(struct mlx4_dev *dev, int sqpn, struct mlx4_qp *qp);
+int mlx4_qp_reserve_range(struct mlx4_dev *dev, int cnt, int align, int *base);
+void mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt);
+
+int mlx4_qp_alloc(struct mlx4_dev *dev, int qpn, struct mlx4_qp *qp);
 void mlx4_qp_free(struct mlx4_dev *dev, struct mlx4_qp *qp);
 
 int mlx4_srq_alloc(struct mlx4_dev *dev, u32 pdn, struct mlx4_mtt *mtt,
@@ -416,6 +458,12 @@
 			  int block_mcast_loopback);
 int mlx4_multicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16]);
 
+int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac, int *index);
+void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, int index);
+
+int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index);
+void mlx4_unregister_vlan(struct mlx4_dev *dev, u8 port, int index);
+
 int mlx4_map_phys_fmr(struct mlx4_dev *dev, struct mlx4_fmr *fmr, u64 *page_list,
 		      int npages, u64 iova, u32 *lkey, u32 *rkey);
 int mlx4_fmr_alloc(struct mlx4_dev *dev, u32 pd, u32 access, int max_pages,
diff --git a/include/linux/module.h b/include/linux/module.h
index 5d2970c..3bfed01 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -29,7 +29,7 @@
 #define MODULE_SYMBOL_PREFIX ""
 #endif
 
-#define MODULE_NAME_LEN (64 - sizeof(unsigned long))
+#define MODULE_NAME_LEN MAX_PARAM_PREFIX_LEN
 
 struct kernel_symbol
 {
@@ -60,6 +60,7 @@
 	struct kobject kobj;
 	struct module *mod;
 	struct kobject *drivers_dir;
+	struct module_param_attrs *mp;
 };
 
 /* These are either module local, or the kernel's dummy ones. */
@@ -242,7 +243,6 @@
 
 	/* Sysfs stuff. */
 	struct module_kobject mkobj;
-	struct module_param_attrs *param_attrs;
 	struct module_attribute *modinfo_attrs;
 	const char *version;
 	const char *srcversion;
@@ -277,7 +277,7 @@
 
 	/* Exception table */
 	unsigned int num_exentries;
-	const struct exception_table_entry *extable;
+	struct exception_table_entry *extable;
 
 	/* Startup function. */
 	int (*init)(void);
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index ec62438..e4af339 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -13,6 +13,9 @@
 #define MODULE_PARAM_PREFIX KBUILD_MODNAME "."
 #endif
 
+/* Chosen so that structs with an unsigned long line up. */
+#define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long))
+
 #ifdef MODULE
 #define ___module_cat(a,b) __mod_ ## a ## b
 #define __module_cat(a,b) ___module_cat(a,b)
@@ -79,7 +82,8 @@
 #define __module_param_call(prefix, name, set, get, arg, perm)		\
 	/* Default value instead of permissions? */			\
 	static int __param_perm_check_##name __attribute__((unused)) =	\
-	BUILD_BUG_ON_ZERO((perm) < 0 || (perm) > 0777 || ((perm) & 2));	\
+	BUILD_BUG_ON_ZERO((perm) < 0 || (perm) > 0777 || ((perm) & 2))	\
+	+ BUILD_BUG_ON_ZERO(sizeof(""prefix) > MAX_PARAM_PREFIX_LEN);	\
 	static const char __param_str_##name[] = prefix #name;		\
 	static struct kernel_param __moduleparam_const __param_##name	\
 	__used								\
@@ -100,6 +104,25 @@
 #define module_param(name, type, perm)				\
 	module_param_named(name, name, type, perm)
 
+#ifndef MODULE
+/**
+ * core_param - define a historical core kernel parameter.
+ * @name: the name of the cmdline and sysfs parameter (often the same as var)
+ * @var: the variable
+ * @type: the type (for param_set_##type and param_get_##type)
+ * @perm: visibility in sysfs
+ *
+ * core_param is just like module_param(), but cannot be modular and
+ * doesn't add a prefix (such as "printk.").  This is for compatibility
+ * with __setup(), and it makes sense as truly core parameters aren't
+ * tied to the particular file they're in.
+ */
+#define core_param(name, var, type, perm)				\
+	param_check_##type(name, &(var));				\
+	__module_param_call("", name, param_set_##type, param_get_##type, \
+			    &var, perm)
+#endif /* !MODULE */
+
 /* Actually copy string: maxlen param is usually sizeof(string). */
 #define module_param_string(name, string, len, perm)			\
 	static const struct kparam_string __param_string_##name		\
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 68f8c32..99eb803 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -51,8 +51,10 @@
 /*
  * Intent data
  */
-#define LOOKUP_OPEN		(0x0100)
-#define LOOKUP_CREATE		(0x0200)
+#define LOOKUP_OPEN		0x0100
+#define LOOKUP_CREATE		0x0200
+#define LOOKUP_EXCL		0x0400
+#define LOOKUP_RENAME_TARGET	0x0800
 
 extern int user_path_at(int, const char __user *, unsigned, struct path *);
 
@@ -61,6 +63,8 @@
 #define user_path_dir(name, path) \
 	user_path_at(AT_FDCWD, name, LOOKUP_FOLLOW | LOOKUP_DIRECTORY, path)
 
+extern int kern_path(const char *, unsigned, struct path *);
+
 extern int path_lookup(const char *, unsigned, struct nameidata *);
 extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
 			   const char *, unsigned int, struct nameidata *);
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 6487585..c8bcb59 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -541,6 +541,14 @@
 #define NETIF_F_V6_CSUM		(NETIF_F_GEN_CSUM | NETIF_F_IPV6_CSUM)
 #define NETIF_F_ALL_CSUM	(NETIF_F_V4_CSUM | NETIF_F_V6_CSUM)
 
+	/*
+	 * If one device supports one of these features, then enable them
+	 * for all in netdev_increment_features.
+	 */
+#define NETIF_F_ONE_FOR_ALL	(NETIF_F_GSO_SOFTWARE | NETIF_F_GSO_ROBUST | \
+				 NETIF_F_SG | NETIF_F_HIGHDMA | \
+				 NETIF_F_FRAGLIST)
+
 	/* Interface index. Unique device identifier	*/
 	int			ifindex;
 	int			iflink;
@@ -1698,7 +1706,9 @@
 
 extern void linkwatch_run_queue(void);
 
-extern int netdev_compute_features(unsigned long all, unsigned long one);
+unsigned long netdev_increment_features(unsigned long all, unsigned long one,
+					unsigned long mask);
+unsigned long netdev_fix_features(unsigned long features, const char *name);
 
 static inline int net_gso_ok(int features, int gso_type)
 {
diff --git a/include/linux/oprofile.h b/include/linux/oprofile.h
index bcb8f72..5231861 100644
--- a/include/linux/oprofile.h
+++ b/include/linux/oprofile.h
@@ -86,13 +86,6 @@
 void oprofile_arch_exit(void);
 
 /**
- * Add data to the event buffer.
- * The data passed is free-form, but typically consists of
- * file offsets, dcookies, context information, and ESCAPE codes.
- */
-void add_event_entry(unsigned long data);
-
-/**
  * Add a sample. This may be called from any context. Pass
  * smp_processor_id() as cpu.
  */
@@ -162,5 +155,14 @@
 
 /** lock for read/write safety */
 extern spinlock_t oprofilefs_lock;
+
+/**
+ * Add the contents of a circular buffer to the event buffer.
+ */
+void oprofile_put_buff(unsigned long *buf, unsigned int start,
+			unsigned int stop, unsigned int max);
+
+unsigned long oprofile_get_cpu_buffer_size(void);
+void oprofile_cpu_buffer_inc_smpl_lost(void);
  
 #endif /* OPROFILE_H */
diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h
index 0fd39f2..f546ad6 100644
--- a/include/linux/page_cgroup.h
+++ b/include/linux/page_cgroup.h
@@ -99,5 +99,10 @@
 {
 	return NULL;
 }
+
+static inline void page_cgroup_init(void)
+{
+}
+
 #endif
 #endif
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 085187b..c75b82b 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -51,6 +51,7 @@
 #include <linux/kobject.h>
 #include <asm/atomic.h>
 #include <linux/device.h>
+#include <linux/io.h>
 
 /* Include the ID list */
 #include <linux/pci_ids.h>
@@ -64,6 +65,11 @@
 	struct kobject kobj;
 };
 
+static inline const char *pci_slot_name(const struct pci_slot *slot)
+{
+	return kobject_name(&slot->kobj);
+}
+
 /* File state for mmap()s on /proc/bus/pci/X/Y */
 enum pci_mmap_state {
 	pci_mmap_io,
@@ -509,9 +515,10 @@
 struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
 				int busnr);
 struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
-				 const char *name);
+				 const char *name,
+				 struct hotplug_slot *hotplug);
 void pci_destroy_slot(struct pci_slot *slot);
-void pci_update_slot_number(struct pci_slot *slot, int slot_nr);
+void pci_renumber_slot(struct pci_slot *slot, int slot_nr);
 int pci_scan_slot(struct pci_bus *bus, int devfn);
 struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn);
 void pci_device_add(struct pci_dev *dev, struct pci_bus *bus);
@@ -539,6 +546,13 @@
 					   unsigned int devfn);
 #endif /* CONFIG_PCI_LEGACY */
 
+enum pci_lost_interrupt_reason {
+	PCI_LOST_IRQ_NO_INFORMATION = 0,
+	PCI_LOST_IRQ_DISABLE_MSI,
+	PCI_LOST_IRQ_DISABLE_MSIX,
+	PCI_LOST_IRQ_DISABLE_ACPI,
+};
+enum pci_lost_interrupt_reason pci_lost_interrupt(struct pci_dev *dev);
 int pci_find_capability(struct pci_dev *dev, int cap);
 int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap);
 int pci_find_ext_capability(struct pci_dev *dev, int cap);
@@ -626,6 +640,8 @@
 int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc);
 int pcie_get_readrq(struct pci_dev *dev);
 int pcie_set_readrq(struct pci_dev *dev, int rq);
+int pci_reset_function(struct pci_dev *dev);
+int pci_execute_reset_function(struct pci_dev *dev);
 void pci_update_resource(struct pci_dev *dev, struct resource *res, int resno);
 int __must_check pci_assign_resource(struct pci_dev *dev, int i);
 int pci_select_bars(struct pci_dev *dev, unsigned long flags);
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index a08cd06..a00bd1a 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -142,8 +142,6 @@
 
 /**
  * struct hotplug_slot - used to register a physical slot with the hotplug pci core
- * @name: the name of the slot being registered.  This string must
- * be unique amoung slots registered on this system.
  * @ops: pointer to the &struct hotplug_slot_ops to be used for this slot
  * @info: pointer to the &struct hotplug_slot_info for the initial values for
  * this slot.
@@ -153,7 +151,6 @@
  * needs.
  */
 struct hotplug_slot {
-	char				*name;
 	struct hotplug_slot_ops		*ops;
 	struct hotplug_slot_info	*info;
 	void (*release) (struct hotplug_slot *slot);
@@ -165,7 +162,13 @@
 };
 #define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj)
 
-extern int pci_hp_register(struct hotplug_slot *, struct pci_bus *, int nr);
+static inline const char *hotplug_slot_name(const struct hotplug_slot *slot)
+{
+	return pci_slot_name(slot->pci_slot);
+}
+
+extern int pci_hp_register(struct hotplug_slot *, struct pci_bus *, int nr,
+			   const char *name);
 extern int pci_hp_deregister(struct hotplug_slot *slot);
 extern int __must_check pci_hp_change_slot_info	(struct hotplug_slot *slot,
 						 struct hotplug_slot_info *info);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index e5d344b..1800f1d 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1944,6 +1944,14 @@
 
 #define PCI_VENDOR_ID_OXSEMI		0x1415
 #define PCI_DEVICE_ID_OXSEMI_12PCI840	0x8403
+#define PCI_DEVICE_ID_OXSEMI_PCIe840		0xC000
+#define PCI_DEVICE_ID_OXSEMI_PCIe840_G		0xC004
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_0		0xC100
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_0_G	0xC104
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_1		0xC110
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_G	0xC114
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_U	0xC118
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU	0xC11C
 #define PCI_DEVICE_ID_OXSEMI_16PCI954	0x9501
 #define PCI_DEVICE_ID_OXSEMI_16PCI95N	0x9511
 #define PCI_DEVICE_ID_OXSEMI_16PCI954PP	0x9513
@@ -2448,6 +2456,7 @@
 #define PCI_DEVICE_ID_INTEL_MCH_PC1	0x359a
 #define PCI_DEVICE_ID_INTEL_E7525_MCH	0x359e
 #define PCI_DEVICE_ID_INTEL_IOAT_CNB	0x360b
+#define PCI_DEVICE_ID_INTEL_FBD_CNB	0x360c
 #define PCI_DEVICE_ID_INTEL_ICH10_0	0x3a14
 #define PCI_DEVICE_ID_INTEL_ICH10_1	0x3a16
 #define PCI_DEVICE_ID_INTEL_ICH10_2	0x3a18
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index eb6686b..e5effd4 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -377,6 +377,7 @@
 #define  PCI_EXP_DEVCAP_RBER	0x8000	/* Role-Based Error Reporting */
 #define  PCI_EXP_DEVCAP_PWR_VAL	0x3fc0000 /* Slot Power Limit Value */
 #define  PCI_EXP_DEVCAP_PWR_SCL	0xc000000 /* Slot Power Limit Scale */
+#define  PCI_EXP_DEVCAP_FLR     0x10000000 /* Function Level Reset */
 #define PCI_EXP_DEVCTL		8	/* Device Control */
 #define  PCI_EXP_DEVCTL_CERE	0x0001	/* Correctable Error Reporting En. */
 #define  PCI_EXP_DEVCTL_NFERE	0x0002	/* Non-Fatal Error Reporting Enable */
@@ -389,6 +390,7 @@
 #define  PCI_EXP_DEVCTL_AUX_PME	0x0400	/* Auxiliary Power PM Enable */
 #define  PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800  /* Enable No Snoop */
 #define  PCI_EXP_DEVCTL_READRQ	0x7000	/* Max_Read_Request_Size */
+#define  PCI_EXP_DEVCTL_BCR_FLR 0x8000  /* Bridge Configuration Retry / FLR */
 #define PCI_EXP_DEVSTA		10	/* Device Status */
 #define  PCI_EXP_DEVSTA_CED	0x01	/* Correctable Error Detected */
 #define  PCI_EXP_DEVSTA_NFED	0x02	/* Non-Fatal Error Detected */
diff --git a/include/linux/phonet.h b/include/linux/phonet.h
index c9609f9..4157faa 100644
--- a/include/linux/phonet.h
+++ b/include/linux/phonet.h
@@ -72,6 +72,7 @@
 	} pn_msg_u;
 };
 #define PN_COMMON_MESSAGE	0xF0
+#define PN_COMMGR		0x10
 #define PN_PREFIX		0xE0 /* resource for extended messages */
 #define pn_submsg_id		pn_msg_u.base.pn_submsg_id
 #define pn_e_submsg_id		pn_msg_u.ext.pn_e_submsg_id
diff --git a/include/linux/pnp.h b/include/linux/pnp.h
index 53b70fd..ca3c887 100644
--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h
@@ -485,14 +485,4 @@
 
 #endif /* CONFIG_PNP */
 
-#define pnp_err(format, arg...) printk(KERN_ERR "pnp: " format "\n" , ## arg)
-#define pnp_info(format, arg...) printk(KERN_INFO "pnp: " format "\n" , ## arg)
-#define pnp_warn(format, arg...) printk(KERN_WARNING "pnp: " format "\n" , ## arg)
-
-#ifdef CONFIG_PNP_DEBUG
-#define pnp_dbg(format, arg...) printk(KERN_DEBUG "pnp: " format "\n" , ## arg)
-#else
-#define pnp_dbg(format, arg...) do {} while (0)
-#endif
-
 #endif /* _LINUX_PNP_H */
diff --git a/include/linux/poll.h b/include/linux/poll.h
index ef45382..badd98a 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -114,11 +114,13 @@
 
 #define MAX_INT64_SECONDS (((s64)(~((u64)0)>>1)/HZ)-1)
 
-extern int do_select(int n, fd_set_bits *fds, s64 *timeout);
+extern int do_select(int n, fd_set_bits *fds, struct timespec *end_time);
 extern int do_sys_poll(struct pollfd __user * ufds, unsigned int nfds,
-		       s64 *timeout);
+		       struct timespec *end_time);
 extern int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
-			   fd_set __user *exp, s64 *timeout);
+			   fd_set __user *exp, struct timespec *end_time);
+
+extern int poll_select_set_timeout(struct timespec *to, long sec, long nsec);
 
 #endif /* KERNEL */
 
diff --git a/include/linux/prctl.h b/include/linux/prctl.h
index 5ad7919..48d887e 100644
--- a/include/linux/prctl.h
+++ b/include/linux/prctl.h
@@ -78,4 +78,11 @@
 #define PR_GET_SECUREBITS 27
 #define PR_SET_SECUREBITS 28
 
+/*
+ * Get/set the timerslack as used by poll/select/nanosleep
+ * A value of 0 means "use default"
+ */
+#define PR_SET_TIMERSLACK 29
+#define PR_GET_TIMERSLACK 30
+
 #endif /* _LINUX_PRCTL_H */
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index 27d534f..b8bdb96 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -97,12 +97,9 @@
 
 #ifdef CONFIG_PROC_FS
 
-extern struct proc_dir_entry *proc_root_kcore;
-
 extern spinlock_t proc_subdir_lock;
 
 extern void proc_root_init(void);
-extern void proc_misc_init(void);
 
 void proc_flush_task(struct task_struct *task);
 struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *);
@@ -138,8 +135,6 @@
 extern int proc_readdir(struct file *, void *, filldir_t);
 extern struct dentry *proc_lookup(struct inode *, struct dentry *, struct nameidata *);
 
-extern const struct file_operations proc_kcore_operations;
-
 extern int pid_ns_prepare_proc(struct pid_namespace *ns);
 extern void pid_ns_release_proc(struct pid_namespace *ns);
 
diff --git a/include/linux/profile.h b/include/linux/profile.h
index 5700450..a0fc322 100644
--- a/include/linux/profile.h
+++ b/include/linux/profile.h
@@ -19,10 +19,16 @@
 
 #if defined(CONFIG_PROFILING) && defined(CONFIG_PROC_FS)
 void create_prof_cpu_mask(struct proc_dir_entry *de);
+int create_proc_profile(void);
 #else
 static inline void create_prof_cpu_mask(struct proc_dir_entry *de)
 {
 }
+
+static inline int create_proc_profile(void)
+{
+	return 0;
+}
 #endif
 
 enum profile_type {
@@ -37,7 +43,6 @@
 /* init basic kernel profiler */
 int profile_init(void);
 int profile_setup(char *str);
-int create_proc_profile(void);
 void profile_tick(int type);
 
 /*
diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h
index c200b9a..8fc909e 100644
--- a/include/linux/raid/md_k.h
+++ b/include/linux/raid/md_k.h
@@ -115,6 +115,9 @@
 					   * in superblock.
 					   */
 	struct work_struct del_work;	/* used for delayed sysfs removal */
+
+	struct sysfs_dirent *sysfs_state; /* handle for 'state'
+					   * sysfs entry */
 };
 
 struct mddev_s
@@ -128,7 +131,6 @@
 #define MD_CHANGE_DEVS	0	/* Some device status has changed */
 #define MD_CHANGE_CLEAN 1	/* transition to or from 'clean' */
 #define MD_CHANGE_PENDING 2	/* superblock update in progress */
-#define MD_NOTIFY_ARRAY_STATE 3	/* atomic context wants to notify userspace */
 
 	int				ro;
 
@@ -239,6 +241,10 @@
 	sector_t			resync_max;	/* resync should pause
 							 * when it gets here */
 
+	struct sysfs_dirent		*sysfs_state;	/* handle for 'array_state'
+							 * file in sysfs.
+							 */
+
 	spinlock_t			write_lock;
 	wait_queue_head_t		sb_wait;	/* for waiting on superblock updates */
 	atomic_t			pending_writes;	/* number of active superblock writes */
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 315517e..bda6b56 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -178,6 +178,7 @@
 	struct reiserfs_journal_cnode *j_first;	/*  oldest journal block.  start here for traverse */
 
 	struct block_device *j_dev_bd;
+	fmode_t j_dev_mode;
 	int j_1st_reserved_block;	/* first block on s_dev of reserved area journal */
 
 	unsigned long j_state;
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 5c38db5..8478f334 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -287,7 +287,6 @@
 extern void account_process_tick(struct task_struct *task, int user);
 extern void update_process_times(int user);
 extern void scheduler_tick(void);
-extern void hrtick_resched(void);
 
 extern void sched_show_task(struct task_struct *p);
 
@@ -681,10 +680,6 @@
 };
 #endif /* defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT) */
 
-#ifdef CONFIG_SCHEDSTATS
-extern const struct file_operations proc_schedstat_operations;
-#endif /* CONFIG_SCHEDSTATS */
-
 #ifdef CONFIG_TASK_DELAY_ACCT
 struct task_delay_info {
 	spinlock_t	lock;
@@ -1346,6 +1341,12 @@
 	int latency_record_count;
 	struct latency_record latency_record[LT_SAVECOUNT];
 #endif
+	/*
+	 * time slack values; these are used to round up poll() and
+	 * select() etc timeout values. These are in nanoseconds.
+	 */
+	unsigned long timer_slack_ns;
+	unsigned long default_timer_slack_ns;
 };
 
 /*
@@ -1665,6 +1666,7 @@
 extern unsigned int sysctl_sched_migration_cost;
 extern unsigned int sysctl_sched_nr_migrate;
 extern unsigned int sysctl_sched_shares_ratelimit;
+extern unsigned int sysctl_sched_shares_thresh;
 
 int sched_nr_latency_handler(struct ctl_table *table, int write,
 		struct file *file, void __user *buffer, size_t *length,
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 5ff9676..ba965c8 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -288,9 +288,4 @@
 	return kmalloc_node(size, flags | __GFP_ZERO, node);
 }
 
-#ifdef CONFIG_SLABINFO
-extern const struct seq_operations slabinfo_op;
-ssize_t slabinfo_write(struct file *, const char __user *, size_t, loff_t *);
-#endif
-
 #endif	/* _LINUX_SLAB_H */
diff --git a/include/linux/smc911x.h b/include/linux/smc911x.h
index b58f54c..521f371 100644
--- a/include/linux/smc911x.h
+++ b/include/linux/smc911x.h
@@ -7,6 +7,7 @@
 struct smc911x_platdata {
 	unsigned long flags;
 	unsigned long irq_flags; /* IRQF_... */
+	int irq_polarity;
 };
 
 #endif /* __SMC911X_H__ */
diff --git a/include/linux/thread_info.h b/include/linux/thread_info.h
index 38a5647..e6b820f 100644
--- a/include/linux/thread_info.h
+++ b/include/linux/thread_info.h
@@ -38,6 +38,14 @@
 #endif
 			u64 expires;
 		} nanosleep;
+		/* For poll */
+		struct {
+			struct pollfd __user *ufds;
+			int nfds;
+			int has_timeout;
+			unsigned long tv_sec;
+			unsigned long tv_nsec;
+		} poll;
 	};
 };
 
diff --git a/include/linux/time.h b/include/linux/time.h
index 4f1c9db..ce321ac 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -40,6 +40,8 @@
 #define NSEC_PER_SEC	1000000000L
 #define FSEC_PER_SEC	1000000000000000L
 
+#define TIME_T_MAX	(time_t)((1UL << ((sizeof(time_t) << 3) - 1)) - 1)
+
 static inline int timespec_equal(const struct timespec *a,
                                  const struct timespec *b)
 {
@@ -74,6 +76,8 @@
 			    const unsigned int min, const unsigned int sec);
 
 extern void set_normalized_timespec(struct timespec *ts, time_t sec, long nsec);
+extern struct timespec timespec_add_safe(const struct timespec lhs,
+					 const struct timespec rhs);
 
 /*
  * sub = lhs - rhs, in normalized form
diff --git a/include/linux/types.h b/include/linux/types.h
index f24f7be..1d98330 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -190,6 +190,7 @@
 
 #ifdef __KERNEL__
 typedef unsigned __bitwise__ gfp_t;
+typedef unsigned __bitwise__ fmode_t;
 
 #ifdef CONFIG_PHYS_ADDR_T_64BIT
 typedef u64 phys_addr_t;
diff --git a/include/linux/usb/wusb-wa.h b/include/linux/usb/wusb-wa.h
new file mode 100644
index 0000000..a102561
--- /dev/null
+++ b/include/linux/usb/wusb-wa.h
@@ -0,0 +1,271 @@
+/*
+ * Wireless USB Wire Adapter constants and structures.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation.
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ * FIXME: organize properly, group logically
+ *
+ * All the event structures are defined in uwb/spec.h, as they are
+ * common to the WHCI and WUSB radio control interfaces.
+ *
+ * References:
+ *   [WUSB] Wireless Universal Serial Bus Specification, revision 1.0, ch8
+ */
+#ifndef __LINUX_USB_WUSB_WA_H
+#define __LINUX_USB_WUSB_WA_H
+
+/**
+ * Radio Command Request for the Radio Control Interface
+ *
+ * Radio Control Interface command and event codes are the same as
+ * WHCI, and listed in include/linux/uwb.h:UWB_RC_{CMD,EVT}_*
+ */
+enum {
+	WA_EXEC_RC_CMD = 40,	/* Radio Control command Request */
+};
+
+/* Wireless Adapter Requests ([WUSB] table 8-51) */
+enum {
+	WUSB_REQ_ADD_MMC_IE     = 20,
+	WUSB_REQ_REMOVE_MMC_IE  = 21,
+	WUSB_REQ_SET_NUM_DNTS   = 22,
+	WUSB_REQ_SET_CLUSTER_ID = 23,
+	WUSB_REQ_SET_DEV_INFO   = 24,
+	WUSB_REQ_GET_TIME       = 25,
+	WUSB_REQ_SET_STREAM_IDX = 26,
+	WUSB_REQ_SET_WUSB_MAS   = 27,
+};
+
+
+/* Wireless Adapter WUSB Channel Time types ([WUSB] table 8-52) */
+enum {
+	WUSB_TIME_ADJ   = 0,
+	WUSB_TIME_BPST  = 1,
+	WUSB_TIME_WUSB  = 2,
+};
+
+enum {
+	WA_ENABLE = 0x01,
+	WA_RESET = 0x02,
+	RPIPE_PAUSE = 0x1,
+};
+
+/* Responses from Get Status request ([WUSB] section 8.3.1.6) */
+enum {
+	WA_STATUS_ENABLED = 0x01,
+	WA_STATUS_RESETTING = 0x02
+};
+
+enum rpipe_crs {
+	RPIPE_CRS_CTL = 0x01,
+	RPIPE_CRS_ISO = 0x02,
+	RPIPE_CRS_BULK = 0x04,
+	RPIPE_CRS_INTR = 0x08
+};
+
+/**
+ * RPipe descriptor ([WUSB] section 8.5.2.11)
+ *
+ * FIXME: explain rpipes
+ */
+struct usb_rpipe_descriptor {
+	u8 	bLength;
+	u8	bDescriptorType;
+	__le16  wRPipeIndex;
+	__le16	wRequests;
+	__le16	wBlocks;		/* rw if 0 */
+	__le16	wMaxPacketSize;		/* rw? */
+	u8	bHSHubAddress;		/* reserved: 0 */
+	u8	bHSHubPort;		/* ??? FIXME ??? */
+	u8	bSpeed;			/* rw: xfer rate 'enum uwb_phy_rate' */
+	u8	bDeviceAddress;		/* rw: Target device address */
+	u8	bEndpointAddress;	/* rw: Target EP address */
+	u8	bDataSequence;		/* ro: Current Data sequence */
+	__le32	dwCurrentWindow;	/* ro */
+	u8	bMaxDataSequence;	/* ro?: max supported seq */
+	u8	bInterval;		/* rw:  */
+	u8	bOverTheAirInterval;	/* rw:  */
+	u8	bmAttribute;		/* ro?  */
+	u8	bmCharacteristics;	/* ro? enum rpipe_attr, supported xsactions */
+	u8	bmRetryOptions;		/* rw? */
+	__le16	wNumTransactionErrors;	/* rw */
+} __attribute__ ((packed));
+
+/**
+ * Wire Adapter Notification types ([WUSB] sections 8.4.5 & 8.5.4)
+ *
+ * These are the notifications coming on the notification endpoint of
+ * an HWA and a DWA.
+ */
+enum wa_notif_type {
+	DWA_NOTIF_RWAKE = 0x91,
+	DWA_NOTIF_PORTSTATUS = 0x92,
+	WA_NOTIF_TRANSFER = 0x93,
+	HWA_NOTIF_BPST_ADJ = 0x94,
+	HWA_NOTIF_DN = 0x95,
+};
+
+/**
+ * Wire Adapter notification header
+ *
+ * Notifications coming from a wire adapter use a common header
+ * defined in [WUSB] sections 8.4.5 & 8.5.4.
+ */
+struct wa_notif_hdr {
+	u8 bLength;
+	u8 bNotifyType;			/* enum wa_notif_type */
+} __attribute__((packed));
+
+/**
+ * HWA DN Received notification [(WUSB] section 8.5.4.2)
+ *
+ * The DNData is specified in WUSB1.0[7.6]. For each device
+ * notification we received, we just need to dispatch it.
+ *
+ * @dndata:  this is really an array of notifications, but all start
+ *           with the same header.
+ */
+struct hwa_notif_dn {
+	struct wa_notif_hdr hdr;
+	u8 bSourceDeviceAddr;		/* from errata 2005/07 */
+	u8 bmAttributes;
+	struct wusb_dn_hdr dndata[];
+} __attribute__((packed));
+
+/* [WUSB] section 8.3.3 */
+enum wa_xfer_type {
+	WA_XFER_TYPE_CTL = 0x80,
+	WA_XFER_TYPE_BI = 0x81,		/* bulk/interrupt */
+	WA_XFER_TYPE_ISO = 0x82,
+	WA_XFER_RESULT = 0x83,
+	WA_XFER_ABORT = 0x84,
+};
+
+/* [WUSB] section 8.3.3 */
+struct wa_xfer_hdr {
+	u8 bLength;			/* 0x18 */
+	u8 bRequestType;		/* 0x80 WA_REQUEST_TYPE_CTL */
+	__le16 wRPipe;			/* RPipe index */
+	__le32 dwTransferID;		/* Host-assigned ID */
+	__le32 dwTransferLength;	/* Length of data to xfer */
+	u8 bTransferSegment;
+} __attribute__((packed));
+
+struct wa_xfer_ctl {
+	struct wa_xfer_hdr hdr;
+	u8 bmAttribute;
+	__le16 wReserved;
+	struct usb_ctrlrequest baSetupData;
+} __attribute__((packed));
+
+struct wa_xfer_bi {
+	struct wa_xfer_hdr hdr;
+	u8 bReserved;
+	__le16 wReserved;
+} __attribute__((packed));
+
+struct wa_xfer_hwaiso {
+	struct wa_xfer_hdr hdr;
+	u8 bReserved;
+	__le16 wPresentationTime;
+	__le32 dwNumOfPackets;
+	/* FIXME: u8 pktdata[]? */
+} __attribute__((packed));
+
+/* [WUSB] section 8.3.3.5 */
+struct wa_xfer_abort {
+	u8 bLength;
+	u8 bRequestType;
+	__le16 wRPipe;			/* RPipe index */
+	__le32 dwTransferID;		/* Host-assigned ID */
+} __attribute__((packed));
+
+/**
+ * WA Transfer Complete notification ([WUSB] section 8.3.3.3)
+ *
+ */
+struct wa_notif_xfer {
+	struct wa_notif_hdr hdr;
+	u8 bEndpoint;
+	u8 Reserved;
+} __attribute__((packed));
+
+/** Transfer result basic codes [WUSB] table 8-15 */
+enum {
+	WA_XFER_STATUS_SUCCESS,
+	WA_XFER_STATUS_HALTED,
+	WA_XFER_STATUS_DATA_BUFFER_ERROR,
+	WA_XFER_STATUS_BABBLE,
+	WA_XFER_RESERVED,
+	WA_XFER_STATUS_NOT_FOUND,
+	WA_XFER_STATUS_INSUFFICIENT_RESOURCE,
+	WA_XFER_STATUS_TRANSACTION_ERROR,
+	WA_XFER_STATUS_ABORTED,
+	WA_XFER_STATUS_RPIPE_NOT_READY,
+	WA_XFER_INVALID_FORMAT,
+	WA_XFER_UNEXPECTED_SEGMENT_NUMBER,
+	WA_XFER_STATUS_RPIPE_TYPE_MISMATCH,
+};
+
+/** [WUSB] section 8.3.3.4 */
+struct wa_xfer_result {
+	struct wa_notif_hdr hdr;
+	__le32 dwTransferID;
+	__le32 dwTransferLength;
+	u8     bTransferSegment;
+	u8     bTransferStatus;
+	__le32 dwNumOfPackets;
+} __attribute__((packed));
+
+/**
+ * Wire Adapter Class Descriptor ([WUSB] section 8.5.2.7).
+ *
+ * NOTE: u16 fields are read Little Endian from the hardware.
+ *
+ * @bNumPorts is the original max number of devices that the host can
+ *            connect; we might chop this so the stack can handle
+ *            it. In case you need to access it, use wusbhc->ports_max
+ *            if it is a Wireless USB WA.
+ */
+struct usb_wa_descriptor {
+	u8	bLength;
+	u8	bDescriptorType;
+	u16	bcdWAVersion;
+	u8	bNumPorts;		/* don't use!! */
+	u8	bmAttributes;		/* Reserved == 0 */
+	u16	wNumRPipes;
+	u16	wRPipeMaxBlock;
+	u8	bRPipeBlockSize;
+	u8	bPwrOn2PwrGood;
+	u8	bNumMMCIEs;
+	u8	DeviceRemovable;	/* FIXME: in DWA this is up to 16 bytes */
+} __attribute__((packed));
+
+/**
+ * HWA Device Information Buffer (WUSB1.0[T8.54])
+ */
+struct hwa_dev_info {
+	u8	bmDeviceAvailability[32];       /* FIXME: ignored for now */
+	u8	bDeviceAddress;
+	__le16	wPHYRates;
+	u8	bmDeviceAttribute;
+} __attribute__((packed));
+
+#endif /* #ifndef __LINUX_USB_WUSB_WA_H */
diff --git a/include/linux/usb/wusb.h b/include/linux/usb/wusb.h
new file mode 100644
index 0000000..5f401b6
--- /dev/null
+++ b/include/linux/usb/wusb.h
@@ -0,0 +1,376 @@
+/*
+ * Wireless USB Standard Definitions
+ * Event Size Tables
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ * FIXME: organize properly, group logically
+ *
+ * All the event structures are defined in uwb/spec.h, as they are
+ * common to the WHCI and WUSB radio control interfaces.
+ */
+
+#ifndef __WUSB_H__
+#define __WUSB_H__
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/uwb/spec.h>
+#include <linux/usb/ch9.h>
+#include <linux/param.h>
+
+/**
+ * WUSB Information Element header
+ *
+ * I don't know why, they decided to make it different to the MBOA MAC
+ * IE Header; beats me.
+ */
+struct wuie_hdr {
+	u8 bLength;
+	u8 bIEIdentifier;
+} __attribute__((packed));
+
+enum {
+	WUIE_ID_WCTA = 0x80,
+	WUIE_ID_CONNECTACK,
+	WUIE_ID_HOST_INFO,
+	WUIE_ID_CHANGE_ANNOUNCE,
+	WUIE_ID_DEVICE_DISCONNECT,
+	WUIE_ID_HOST_DISCONNECT,
+	WUIE_ID_KEEP_ALIVE = 0x89,
+	WUIE_ID_ISOCH_DISCARD,
+	WUIE_ID_RESET_DEVICE,
+};
+
+/**
+ * Maximum number of array elements in a WUSB IE.
+ *
+ * WUSB1.0[7.5 before table 7-38] says that in WUSB IEs that
+ * are "arrays" have to limited to 4 elements. So we define it
+ * like that to ease up and submit only the neeed size.
+ */
+#define WUIE_ELT_MAX 4
+
+/**
+ * Wrapper for the data that defines a CHID, a CDID or a CK
+ *
+ * WUSB defines that CHIDs, CDIDs and CKs are a 16 byte string of
+ * data. In order to avoid confusion and enforce types, we wrap it.
+ *
+ * Make it packed, as we use it in some hw defintions.
+ */
+struct wusb_ckhdid {
+	u8 data[16];
+} __attribute__((packed));
+
+const static
+struct wusb_ckhdid wusb_ckhdid_zero = { .data = { 0 } };
+
+#define WUSB_CKHDID_STRSIZE (3 * sizeof(struct wusb_ckhdid) + 1)
+
+/**
+ * WUSB IE: Host Information (WUSB1.0[7.5.2])
+ *
+ * Used to provide information about the host to the Wireless USB
+ * devices in range (CHID can be used as an ASCII string).
+ */
+struct wuie_host_info {
+	struct wuie_hdr hdr;
+	__le16 attributes;
+	struct wusb_ckhdid CHID;
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Connect Ack (WUSB1.0[7.5.1])
+ *
+ * Used to acknowledge device connect requests. See note for
+ * WUIE_ELT_MAX.
+ */
+struct wuie_connect_ack {
+	struct wuie_hdr hdr;
+	struct {
+		struct wusb_ckhdid CDID;
+		u8 bDeviceAddress;	/* 0 means unused */
+		u8 bReserved;
+	} blk[WUIE_ELT_MAX];
+} __attribute__((packed));
+
+/**
+ * WUSB IE Host Information Element, Connect Availability
+ *
+ * WUSB1.0[7.5.2], bmAttributes description
+ */
+enum {
+	WUIE_HI_CAP_RECONNECT = 0,
+	WUIE_HI_CAP_LIMITED,
+	WUIE_HI_CAP_RESERVED,
+	WUIE_HI_CAP_ALL,
+};
+
+/**
+ * WUSB IE: Channel Stop (WUSB1.0[7.5.8])
+ *
+ * Tells devices the host is going to stop sending MMCs and will dissapear.
+ */
+struct wuie_channel_stop {
+	struct wuie_hdr hdr;
+	u8 attributes;
+	u8 timestamp[3];
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Keepalive (WUSB1.0[7.5.9])
+ *
+ * Ask device(s) to send keepalives.
+ */
+struct wuie_keep_alive {
+	struct wuie_hdr hdr;
+	u8 bDeviceAddress[WUIE_ELT_MAX];
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Reset device (WUSB1.0[7.5.11])
+ *
+ * Tell device to reset; in all truth, we can fit 4 CDIDs, but we only
+ * use it for one at the time...
+ *
+ * In any case, this request is a wee bit silly: why don't they target
+ * by address??
+ */
+struct wuie_reset {
+	struct wuie_hdr hdr;
+	struct wusb_ckhdid CDID;
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Disconnect device (WUSB1.0[7.5.11])
+ *
+ * Tell device to disconnect; we can fit 4 addresses, but we only use
+ * it for one at the time...
+ */
+struct wuie_disconnect {
+	struct wuie_hdr hdr;
+	u8 bDeviceAddress;
+	u8 padding;
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Host disconnect ([WUSB] section 7.5.5)
+ *
+ * Tells all connected devices to disconnect.
+ */
+struct wuie_host_disconnect {
+	struct wuie_hdr hdr;
+} __attribute__((packed));
+
+/**
+ * WUSB Device Notification header (WUSB1.0[7.6])
+ */
+struct wusb_dn_hdr {
+	u8 bType;
+	u8 notifdata[];
+} __attribute__((packed));
+
+/** Device Notification codes (WUSB1.0[Table 7-54]) */
+enum WUSB_DN {
+	WUSB_DN_CONNECT = 0x01,
+	WUSB_DN_DISCONNECT = 0x02,
+	WUSB_DN_EPRDY = 0x03,
+	WUSB_DN_MASAVAILCHANGED = 0x04,
+	WUSB_DN_RWAKE = 0x05,
+	WUSB_DN_SLEEP = 0x06,
+	WUSB_DN_ALIVE = 0x07,
+};
+
+/** WUSB Device Notification Connect */
+struct wusb_dn_connect {
+	struct wusb_dn_hdr hdr;
+	__le16 attributes;
+	struct wusb_ckhdid CDID;
+} __attribute__((packed));
+
+static inline int wusb_dn_connect_prev_dev_addr(const struct wusb_dn_connect *dn)
+{
+	return le16_to_cpu(dn->attributes) & 0xff;
+}
+
+static inline int wusb_dn_connect_new_connection(const struct wusb_dn_connect *dn)
+{
+	return (le16_to_cpu(dn->attributes) >> 8) & 0x1;
+}
+
+static inline int wusb_dn_connect_beacon_behavior(const struct wusb_dn_connect *dn)
+{
+	return (le16_to_cpu(dn->attributes) >> 9) & 0x03;
+}
+
+/** Device is alive (aka: pong) (WUSB1.0[7.6.7]) */
+struct wusb_dn_alive {
+	struct wusb_dn_hdr hdr;
+} __attribute__((packed));
+
+/** Device is disconnecting (WUSB1.0[7.6.2]) */
+struct wusb_dn_disconnect {
+	struct wusb_dn_hdr hdr;
+} __attribute__((packed));
+
+/* General constants */
+enum {
+	WUSB_TRUST_TIMEOUT_MS = 4000,	/* [WUSB] section 4.15.1 */
+};
+
+static inline size_t ckhdid_printf(char *pr_ckhdid, size_t size,
+				   const struct wusb_ckhdid *ckhdid)
+{
+	return scnprintf(pr_ckhdid, size,
+			 "%02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx "
+			 "%02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx",
+			 ckhdid->data[0],  ckhdid->data[1],
+			 ckhdid->data[2],  ckhdid->data[3],
+			 ckhdid->data[4],  ckhdid->data[5],
+			 ckhdid->data[6],  ckhdid->data[7],
+			 ckhdid->data[8],  ckhdid->data[9],
+			 ckhdid->data[10], ckhdid->data[11],
+			 ckhdid->data[12], ckhdid->data[13],
+			 ckhdid->data[14], ckhdid->data[15]);
+}
+
+/*
+ * WUSB Crypto stuff (WUSB1.0[6])
+ */
+
+extern const char *wusb_et_name(u8);
+
+/**
+ * WUSB key index WUSB1.0[7.3.2.4], for usage when setting keys for
+ * the host or the device.
+ */
+static inline u8 wusb_key_index(int index, int type, int originator)
+{
+	return (originator << 6) | (type << 4) | index;
+}
+
+#define WUSB_KEY_INDEX_TYPE_PTK			0 /* for HWA only */
+#define WUSB_KEY_INDEX_TYPE_ASSOC		1
+#define WUSB_KEY_INDEX_TYPE_GTK			2
+#define WUSB_KEY_INDEX_ORIGINATOR_HOST		0
+#define WUSB_KEY_INDEX_ORIGINATOR_DEVICE	1
+
+/* A CCM Nonce, defined in WUSB1.0[6.4.1] */
+struct aes_ccm_nonce {
+	u8 sfn[6];              /* Little Endian */
+	u8 tkid[3];             /* LE */
+	struct uwb_dev_addr dest_addr;
+	struct uwb_dev_addr src_addr;
+} __attribute__((packed));
+
+/* A CCM operation label, defined on WUSB1.0[6.5.x] */
+struct aes_ccm_label {
+	u8 data[14];
+} __attribute__((packed));
+
+/*
+ * Input to the key derivation sequence defined in
+ * WUSB1.0[6.5.1]. Rest of the data is in the CCM Nonce passed to the
+ * PRF function.
+ */
+struct wusb_keydvt_in {
+	u8 hnonce[16];
+	u8 dnonce[16];
+} __attribute__((packed));
+
+/*
+ * Output from the key derivation sequence defined in
+ * WUSB1.0[6.5.1].
+ */
+struct wusb_keydvt_out {
+	u8 kck[16];
+	u8 ptk[16];
+} __attribute__((packed));
+
+/* Pseudo Random Function WUSB1.0[6.5] */
+extern int wusb_crypto_init(void);
+extern void wusb_crypto_exit(void);
+extern ssize_t wusb_prf(void *out, size_t out_size,
+			const u8 key[16], const struct aes_ccm_nonce *_n,
+			const struct aes_ccm_label *a,
+			const void *b, size_t blen, size_t len);
+
+static inline int wusb_prf_64(void *out, size_t out_size, const u8 key[16],
+			      const struct aes_ccm_nonce *n,
+			      const struct aes_ccm_label *a,
+			      const void *b, size_t blen)
+{
+	return wusb_prf(out, out_size, key, n, a, b, blen, 64);
+}
+
+static inline int wusb_prf_128(void *out, size_t out_size, const u8 key[16],
+			       const struct aes_ccm_nonce *n,
+			       const struct aes_ccm_label *a,
+			       const void *b, size_t blen)
+{
+	return wusb_prf(out, out_size, key, n, a, b, blen, 128);
+}
+
+static inline int wusb_prf_256(void *out, size_t out_size, const u8 key[16],
+			       const struct aes_ccm_nonce *n,
+			       const struct aes_ccm_label *a,
+			       const void *b, size_t blen)
+{
+	return wusb_prf(out, out_size, key, n, a, b, blen, 256);
+}
+
+/* Key derivation WUSB1.0[6.5.1] */
+static inline int wusb_key_derive(struct wusb_keydvt_out *keydvt_out,
+				  const u8 key[16],
+				  const struct aes_ccm_nonce *n,
+				  const struct wusb_keydvt_in *keydvt_in)
+{
+	const struct aes_ccm_label a = { .data = "Pair-wise keys" };
+	return wusb_prf_256(keydvt_out, sizeof(*keydvt_out), key, n, &a,
+			    keydvt_in, sizeof(*keydvt_in));
+}
+
+/*
+ * Out-of-band MIC Generation WUSB1.0[6.5.2]
+ *
+ * Compute the MIC over @key, @n and @hs and place it in @mic_out.
+ *
+ * @mic_out:  Where to place the 8 byte MIC tag
+ * @key:      KCK from the derivation process
+ * @n:        CCM nonce, n->sfn == 0, TKID as established in the
+ *            process.
+ * @hs:       Handshake struct for phase 2 of the 4-way.
+ *            hs->bStatus and hs->bReserved are zero.
+ *            hs->bMessageNumber is 2 (WUSB1.0[7.3.2.5.2]
+ *            hs->dest_addr is the device's USB address padded with 0
+ *            hs->src_addr is the hosts's UWB device address
+ *            hs->mic is ignored (as we compute that value).
+ */
+static inline int wusb_oob_mic(u8 mic_out[8], const u8 key[16],
+			       const struct aes_ccm_nonce *n,
+			       const struct usb_handshake *hs)
+{
+	const struct aes_ccm_label a = { .data = "out-of-bandMIC" };
+	return wusb_prf_64(mic_out, 8, key, n, &a,
+			   hs, sizeof(*hs) - sizeof(hs->MIC));
+}
+
+#endif /* #ifndef __WUSB_H__ */
diff --git a/include/linux/uwb.h b/include/linux/uwb.h
new file mode 100644
index 0000000..f9ccbd9
--- /dev/null
+++ b/include/linux/uwb.h
@@ -0,0 +1,765 @@
+/*
+ * Ultra Wide Band
+ * UWB API
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: doc: overview of the API, different parts and pointers
+ */
+
+#ifndef __LINUX__UWB_H__
+#define __LINUX__UWB_H__
+
+#include <linux/limits.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/uwb/spec.h>
+
+struct uwb_dev;
+struct uwb_beca_e;
+struct uwb_rc;
+struct uwb_rsv;
+struct uwb_dbg;
+
+/**
+ * struct uwb_dev - a UWB Device
+ * @rc: UWB Radio Controller that discovered the device (kind of its
+ *     parent).
+ * @bce: a beacon cache entry for this device; or NULL if the device
+ *     is a local radio controller.
+ * @mac_addr: the EUI-48 address of this device.
+ * @dev_addr: the current DevAddr used by this device.
+ * @beacon_slot: the slot number the beacon is using.
+ * @streams: bitmap of streams allocated to reservations targeted at
+ *     this device.  For an RC, this is the streams allocated for
+ *     reservations targeted at DevAddrs.
+ *
+ * A UWB device may either by a neighbor or part of a local radio
+ * controller.
+ */
+struct uwb_dev {
+	struct mutex mutex;
+	struct list_head list_node;
+	struct device dev;
+	struct uwb_rc *rc;		/* radio controller */
+	struct uwb_beca_e *bce;		/* Beacon Cache Entry */
+
+	struct uwb_mac_addr mac_addr;
+	struct uwb_dev_addr dev_addr;
+	int beacon_slot;
+	DECLARE_BITMAP(streams, UWB_NUM_STREAMS);
+};
+#define to_uwb_dev(d) container_of(d, struct uwb_dev, dev)
+
+/**
+ * UWB HWA/WHCI Radio Control {Command|Event} Block context IDs
+ *
+ * RC[CE]Bs have a 'context ID' field that matches the command with
+ * the event received to confirm it.
+ *
+ * Maximum number of context IDs
+ */
+enum { UWB_RC_CTX_MAX = 256 };
+
+
+/** Notification chain head for UWB generated events to listeners */
+struct uwb_notifs_chain {
+	struct list_head list;
+	struct mutex mutex;
+};
+
+/**
+ * struct uwb_mas_bm - a bitmap of all MAS in a superframe
+ * @bm: a bitmap of length #UWB_NUM_MAS
+ */
+struct uwb_mas_bm {
+	DECLARE_BITMAP(bm, UWB_NUM_MAS);
+};
+
+/**
+ * uwb_rsv_state - UWB Reservation state.
+ *
+ * NONE - reservation is not active (no DRP IE being transmitted).
+ *
+ * Owner reservation states:
+ *
+ * INITIATED - owner has sent an initial DRP request.
+ * PENDING - target responded with pending Reason Code.
+ * MODIFIED - reservation manager is modifying an established
+ * reservation with a different MAS allocation.
+ * ESTABLISHED - the reservation has been successfully negotiated.
+ *
+ * Target reservation states:
+ *
+ * DENIED - request is denied.
+ * ACCEPTED - request is accepted.
+ * PENDING - PAL has yet to make a decision to whether to accept or
+ * deny.
+ *
+ * FIXME: further target states TBD.
+ */
+enum uwb_rsv_state {
+	UWB_RSV_STATE_NONE,
+	UWB_RSV_STATE_O_INITIATED,
+	UWB_RSV_STATE_O_PENDING,
+	UWB_RSV_STATE_O_MODIFIED,
+	UWB_RSV_STATE_O_ESTABLISHED,
+	UWB_RSV_STATE_T_ACCEPTED,
+	UWB_RSV_STATE_T_DENIED,
+	UWB_RSV_STATE_T_PENDING,
+
+	UWB_RSV_STATE_LAST,
+};
+
+enum uwb_rsv_target_type {
+	UWB_RSV_TARGET_DEV,
+	UWB_RSV_TARGET_DEVADDR,
+};
+
+/**
+ * struct uwb_rsv_target - the target of a reservation.
+ *
+ * Reservations unicast and targeted at a single device
+ * (UWB_RSV_TARGET_DEV); or (e.g., in the case of WUSB) targeted at a
+ * specific (private) DevAddr (UWB_RSV_TARGET_DEVADDR).
+ */
+struct uwb_rsv_target {
+	enum uwb_rsv_target_type type;
+	union {
+		struct uwb_dev *dev;
+		struct uwb_dev_addr devaddr;
+	};
+};
+
+/*
+ * Number of streams reserved for reservations targeted at DevAddrs.
+ */
+#define UWB_NUM_GLOBAL_STREAMS 1
+
+typedef void (*uwb_rsv_cb_f)(struct uwb_rsv *rsv);
+
+/**
+ * struct uwb_rsv - a DRP reservation
+ *
+ * Data structure management:
+ *
+ * @rc:             the radio controller this reservation is for
+ *                  (as target or owner)
+ * @rc_node:        a list node for the RC
+ * @pal_node:       a list node for the PAL
+ *
+ * Owner and target parameters:
+ *
+ * @owner:          the UWB device owning this reservation
+ * @target:         the target UWB device
+ * @type:           reservation type
+ *
+ * Owner parameters:
+ *
+ * @max_mas:        maxiumum number of MAS
+ * @min_mas:        minimum number of MAS
+ * @sparsity:       owner selected sparsity
+ * @is_multicast:   true iff multicast
+ *
+ * @callback:       callback function when the reservation completes
+ * @pal_priv:       private data for the PAL making the reservation
+ *
+ * Reservation status:
+ *
+ * @status:         negotiation status
+ * @stream:         stream index allocated for this reservation
+ * @mas:            reserved MAS
+ * @drp_ie:         the DRP IE
+ * @ie_valid:       true iff the DRP IE matches the reservation parameters
+ *
+ * DRP reservations are uniquely identified by the owner, target and
+ * stream index.  However, when using a DevAddr as a target (e.g., for
+ * a WUSB cluster reservation) the responses may be received from
+ * devices with different DevAddrs.  In this case, reservations are
+ * uniquely identified by just the stream index.  A number of stream
+ * indexes (UWB_NUM_GLOBAL_STREAMS) are reserved for this.
+ */
+struct uwb_rsv {
+	struct uwb_rc *rc;
+	struct list_head rc_node;
+	struct list_head pal_node;
+
+	struct uwb_dev *owner;
+	struct uwb_rsv_target target;
+	enum uwb_drp_type type;
+	int max_mas;
+	int min_mas;
+	int sparsity;
+	bool is_multicast;
+
+	uwb_rsv_cb_f callback;
+	void *pal_priv;
+
+	enum uwb_rsv_state state;
+	u8 stream;
+	struct uwb_mas_bm mas;
+	struct uwb_ie_drp *drp_ie;
+	bool ie_valid;
+	struct timer_list timer;
+	bool expired;
+};
+
+static const
+struct uwb_mas_bm uwb_mas_bm_zero = { .bm = { 0 } };
+
+static inline void uwb_mas_bm_copy_le(void *dst, const struct uwb_mas_bm *mas)
+{
+	bitmap_copy_le(dst, mas->bm, UWB_NUM_MAS);
+}
+
+/**
+ * struct uwb_drp_avail - a radio controller's view of MAS usage
+ * @global:   MAS unused by neighbors (excluding reservations targetted
+ *            or owned by the local radio controller) or the beaon period
+ * @local:    MAS unused by local established reservations
+ * @pending:  MAS unused by local pending reservations
+ * @ie:       DRP Availability IE to be included in the beacon
+ * @ie_valid: true iff @ie is valid and does not need to regenerated from
+ *            @global and @local
+ *
+ * Each radio controller maintains a view of MAS usage or
+ * availability. MAS available for a new reservation are determined
+ * from the intersection of @global, @local, and @pending.
+ *
+ * The radio controller must transmit a DRP Availability IE that's the
+ * intersection of @global and @local.
+ *
+ * A set bit indicates the MAS is unused and available.
+ *
+ * rc->rsvs_mutex should be held before accessing this data structure.
+ *
+ * [ECMA-368] section 17.4.3.
+ */
+struct uwb_drp_avail {
+	DECLARE_BITMAP(global, UWB_NUM_MAS);
+	DECLARE_BITMAP(local, UWB_NUM_MAS);
+	DECLARE_BITMAP(pending, UWB_NUM_MAS);
+	struct uwb_ie_drp_avail ie;
+	bool ie_valid;
+};
+
+
+const char *uwb_rsv_state_str(enum uwb_rsv_state state);
+const char *uwb_rsv_type_str(enum uwb_drp_type type);
+
+struct uwb_rsv *uwb_rsv_create(struct uwb_rc *rc, uwb_rsv_cb_f cb,
+			       void *pal_priv);
+void uwb_rsv_destroy(struct uwb_rsv *rsv);
+
+int uwb_rsv_establish(struct uwb_rsv *rsv);
+int uwb_rsv_modify(struct uwb_rsv *rsv,
+		   int max_mas, int min_mas, int sparsity);
+void uwb_rsv_terminate(struct uwb_rsv *rsv);
+
+void uwb_rsv_accept(struct uwb_rsv *rsv, uwb_rsv_cb_f cb, void *pal_priv);
+
+/**
+ * Radio Control Interface instance
+ *
+ *
+ * Life cycle rules: those of the UWB Device.
+ *
+ * @index:    an index number for this radio controller, as used in the
+ *            device name.
+ * @version:  version of protocol supported by this device
+ * @priv:     Backend implementation; rw with uwb_dev.dev.sem taken.
+ * @cmd:      Backend implementation to execute commands; rw and call
+ *            only  with uwb_dev.dev.sem taken.
+ * @reset:    Hardware reset of radio controller and any PAL controllers.
+ * @filter:   Backend implementation to manipulate data to and from device
+ *            to be compliant to specification assumed by driver (WHCI
+ *            0.95).
+ *
+ *            uwb_dev.dev.mutex is used to execute commands and update
+ *            the corresponding structures; can't use a spinlock
+ *            because rc->cmd() can sleep.
+ * @ies:         This is a dynamically allocated array cacheing the
+ *               IEs (settable by the host) that the beacon of this
+ *               radio controller is currently sending.
+ *
+ *               In reality, we store here the full command we set to
+ *               the radio controller (which is basically a command
+ *               prefix followed by all the IEs the beacon currently
+ *               contains). This way we don't have to realloc and
+ *               memcpy when setting it.
+ *
+ *               We set this up in uwb_rc_ie_setup(), where we alloc
+ *               this struct, call get_ie() [so we know which IEs are
+ *               currently being sent, if any].
+ *
+ * @ies_capacity:Amount of space (in bytes) allocated in @ies. The
+ *               amount used is given by sizeof(*ies) plus ies->wIELength
+ *               (which is a little endian quantity all the time).
+ * @ies_mutex:   protect the IE cache
+ * @dbg:         information for the debug interface
+ */
+struct uwb_rc {
+	struct uwb_dev uwb_dev;
+	int index;
+	u16 version;
+
+	struct module *owner;
+	void *priv;
+	int (*start)(struct uwb_rc *rc);
+	void (*stop)(struct uwb_rc *rc);
+	int (*cmd)(struct uwb_rc *, const struct uwb_rccb *, size_t);
+	int (*reset)(struct uwb_rc *rc);
+	int (*filter_cmd)(struct uwb_rc *, struct uwb_rccb **, size_t *);
+	int (*filter_event)(struct uwb_rc *, struct uwb_rceb **, const size_t,
+			    size_t *, size_t *);
+
+	spinlock_t neh_lock;		/* protects neh_* and ctx_* */
+	struct list_head neh_list;	/* Open NE handles */
+	unsigned long ctx_bm[UWB_RC_CTX_MAX / 8 / sizeof(unsigned long)];
+	u8 ctx_roll;
+
+	int beaconing;			/* Beaconing state [channel number] */
+	int scanning;
+	enum uwb_scan_type scan_type:3;
+	unsigned ready:1;
+	struct uwb_notifs_chain notifs_chain;
+
+	struct uwb_drp_avail drp_avail;
+	struct list_head reservations;
+	struct mutex rsvs_mutex;
+	struct workqueue_struct *rsv_workq;
+	struct work_struct rsv_update_work;
+
+	struct mutex ies_mutex;
+	struct uwb_rc_cmd_set_ie *ies;
+	size_t ies_capacity;
+
+	spinlock_t pal_lock;
+	struct list_head pals;
+
+	struct uwb_dbg *dbg;
+};
+
+
+/**
+ * struct uwb_pal - a UWB PAL
+ * @name:    descriptive name for this PAL (wushc, wlp, etc.).
+ * @device:  a device for the PAL.  Used to link the PAL and the radio
+ *           controller in sysfs.
+ * @new_rsv: called when a peer requests a reservation (may be NULL if
+ *           the PAL cannot accept reservation requests).
+ *
+ * A Protocol Adaptation Layer (PAL) is a user of the WiMedia UWB
+ * radio platform (e.g., WUSB, WLP or Bluetooth UWB AMP).
+ *
+ * The PALs using a radio controller must register themselves to
+ * permit the UWB stack to coordinate usage of the radio between the
+ * various PALs or to allow PALs to response to certain requests from
+ * peers.
+ *
+ * A struct uwb_pal should be embedded in a containing structure
+ * belonging to the PAL and initialized with uwb_pal_init()).  Fields
+ * should be set appropriately by the PAL before registering the PAL
+ * with uwb_pal_register().
+ */
+struct uwb_pal {
+	struct list_head node;
+	const char *name;
+	struct device *device;
+	void (*new_rsv)(struct uwb_rsv *rsv);
+};
+
+void uwb_pal_init(struct uwb_pal *pal);
+int uwb_pal_register(struct uwb_rc *rc, struct uwb_pal *pal);
+void uwb_pal_unregister(struct uwb_rc *rc, struct uwb_pal *pal);
+
+/*
+ * General public API
+ *
+ * This API can be used by UWB device drivers or by those implementing
+ * UWB Radio Controllers
+ */
+struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc,
+				       const struct uwb_dev_addr *devaddr);
+struct uwb_dev *uwb_dev_get_by_rc(struct uwb_dev *, struct uwb_rc *);
+static inline void uwb_dev_get(struct uwb_dev *uwb_dev)
+{
+	get_device(&uwb_dev->dev);
+}
+static inline void uwb_dev_put(struct uwb_dev *uwb_dev)
+{
+	put_device(&uwb_dev->dev);
+}
+struct uwb_dev *uwb_dev_try_get(struct uwb_rc *rc, struct uwb_dev *uwb_dev);
+
+/**
+ * Callback function for 'uwb_{dev,rc}_foreach()'.
+ *
+ * @dev:  Linux device instance
+ *        'uwb_dev = container_of(dev, struct uwb_dev, dev)'
+ * @priv: Data passed by the caller to 'uwb_{dev,rc}_foreach()'.
+ *
+ * @returns: 0 to continue the iterations, any other val to stop
+ *           iterating and return the value to the caller of
+ *           _foreach().
+ */
+typedef int (*uwb_dev_for_each_f)(struct device *dev, void *priv);
+int uwb_dev_for_each(struct uwb_rc *rc, uwb_dev_for_each_f func, void *priv);
+
+struct uwb_rc *uwb_rc_alloc(void);
+struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *);
+struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *);
+void uwb_rc_put(struct uwb_rc *rc);
+
+typedef void (*uwb_rc_cmd_cb_f)(struct uwb_rc *rc, void *arg,
+                                struct uwb_rceb *reply, ssize_t reply_size);
+
+int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name,
+		     struct uwb_rccb *cmd, size_t cmd_size,
+		     u8 expected_type, u16 expected_event,
+		     uwb_rc_cmd_cb_f cb, void *arg);
+ssize_t uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name,
+		   struct uwb_rccb *cmd, size_t cmd_size,
+		   struct uwb_rceb *reply, size_t reply_size);
+ssize_t uwb_rc_vcmd(struct uwb_rc *rc, const char *cmd_name,
+		    struct uwb_rccb *cmd, size_t cmd_size,
+		    u8 expected_type, u16 expected_event,
+		    struct uwb_rceb **preply);
+ssize_t uwb_rc_get_ie(struct uwb_rc *, struct uwb_rc_evt_get_ie **);
+int uwb_bg_joined(struct uwb_rc *rc);
+
+size_t __uwb_addr_print(char *, size_t, const unsigned char *, int);
+
+int uwb_rc_dev_addr_set(struct uwb_rc *, const struct uwb_dev_addr *);
+int uwb_rc_dev_addr_get(struct uwb_rc *, struct uwb_dev_addr *);
+int uwb_rc_mac_addr_set(struct uwb_rc *, const struct uwb_mac_addr *);
+int uwb_rc_mac_addr_get(struct uwb_rc *, struct uwb_mac_addr *);
+int __uwb_mac_addr_assigned_check(struct device *, void *);
+int __uwb_dev_addr_assigned_check(struct device *, void *);
+
+/* Print in @buf a pretty repr of @addr */
+static inline size_t uwb_dev_addr_print(char *buf, size_t buf_size,
+					const struct uwb_dev_addr *addr)
+{
+	return __uwb_addr_print(buf, buf_size, addr->data, 0);
+}
+
+/* Print in @buf a pretty repr of @addr */
+static inline size_t uwb_mac_addr_print(char *buf, size_t buf_size,
+					const struct uwb_mac_addr *addr)
+{
+	return __uwb_addr_print(buf, buf_size, addr->data, 1);
+}
+
+/* @returns 0 if device addresses @addr2 and @addr1 are equal */
+static inline int uwb_dev_addr_cmp(const struct uwb_dev_addr *addr1,
+				   const struct uwb_dev_addr *addr2)
+{
+	return memcmp(addr1, addr2, sizeof(*addr1));
+}
+
+/* @returns 0 if MAC addresses @addr2 and @addr1 are equal */
+static inline int uwb_mac_addr_cmp(const struct uwb_mac_addr *addr1,
+				   const struct uwb_mac_addr *addr2)
+{
+	return memcmp(addr1, addr2, sizeof(*addr1));
+}
+
+/* @returns !0 if a MAC @addr is a broadcast address */
+static inline int uwb_mac_addr_bcast(const struct uwb_mac_addr *addr)
+{
+	struct uwb_mac_addr bcast = {
+		.data = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }
+	};
+	return !uwb_mac_addr_cmp(addr, &bcast);
+}
+
+/* @returns !0 if a MAC @addr is all zeroes*/
+static inline int uwb_mac_addr_unset(const struct uwb_mac_addr *addr)
+{
+	struct uwb_mac_addr unset = {
+		.data = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
+	};
+	return !uwb_mac_addr_cmp(addr, &unset);
+}
+
+/* @returns !0 if the address is in use. */
+static inline unsigned __uwb_dev_addr_assigned(struct uwb_rc *rc,
+					       struct uwb_dev_addr *addr)
+{
+	return uwb_dev_for_each(rc, __uwb_dev_addr_assigned_check, addr);
+}
+
+/*
+ * UWB Radio Controller API
+ *
+ * This API is used (in addition to the general API) to implement UWB
+ * Radio Controllers.
+ */
+void uwb_rc_init(struct uwb_rc *);
+int uwb_rc_add(struct uwb_rc *, struct device *dev, void *rc_priv);
+void uwb_rc_rm(struct uwb_rc *);
+void uwb_rc_neh_grok(struct uwb_rc *, void *, size_t);
+void uwb_rc_neh_error(struct uwb_rc *, int);
+void uwb_rc_reset_all(struct uwb_rc *rc);
+
+/**
+ * uwb_rsv_is_owner - is the owner of this reservation the RC?
+ * @rsv: the reservation
+ */
+static inline bool uwb_rsv_is_owner(struct uwb_rsv *rsv)
+{
+	return rsv->owner == &rsv->rc->uwb_dev;
+}
+
+/**
+ * Events generated by UWB that can be passed to any listeners
+ *
+ * Higher layers can register callback functions with the radio
+ * controller using uwb_notifs_register(). The radio controller
+ * maintains a list of all registered handlers and will notify all
+ * nodes when an event occurs.
+ */
+enum uwb_notifs {
+	UWB_NOTIF_BG_JOIN = 0,	/* radio controller joined a beacon group */
+	UWB_NOTIF_BG_LEAVE = 1,	/* radio controller left a beacon group */
+	UWB_NOTIF_ONAIR,
+	UWB_NOTIF_OFFAIR,
+};
+
+/* Callback function registered with UWB */
+struct uwb_notifs_handler {
+	struct list_head list_node;
+	void (*cb)(void *, struct uwb_dev *, enum uwb_notifs);
+	void *data;
+};
+
+int uwb_notifs_register(struct uwb_rc *, struct uwb_notifs_handler *);
+int uwb_notifs_deregister(struct uwb_rc *, struct uwb_notifs_handler *);
+
+
+/**
+ * UWB radio controller Event Size Entry (for creating entry tables)
+ *
+ * WUSB and WHCI define events and notifications, and they might have
+ * fixed or variable size.
+ *
+ * Each event/notification has a size which is not necessarily known
+ * in advance based on the event code. As well, vendor specific
+ * events/notifications will have a size impossible to determine
+ * unless we know about the device's specific details.
+ *
+ * It was way too smart of the spec writers not to think that it would
+ * be impossible for a generic driver to skip over vendor specific
+ * events/notifications if there are no LENGTH fields in the HEADER of
+ * each message...the transaction size cannot be counted on as the
+ * spec does not forbid to pack more than one event in a single
+ * transaction.
+ *
+ * Thus, we guess sizes with tables (or for events, when you know the
+ * size ahead of time you can use uwb_rc_neh_extra_size*()). We
+ * register tables with the known events and their sizes, and then we
+ * traverse those tables. For those with variable length, we provide a
+ * way to lookup the size inside the event/notification's
+ * payload. This allows device-specific event size tables to be
+ * registered.
+ *
+ * @size:   Size of the payload
+ *
+ * @offset: if != 0, at offset @offset-1 starts a field with a length
+ *          that has to be added to @size. The format of the field is
+ *          given by @type.
+ *
+ * @type:   Type and length of the offset field. Most common is LE 16
+ *          bits (that's why that is zero); others are there mostly to
+ *          cover for bugs and weirdos.
+ */
+struct uwb_est_entry {
+	size_t size;
+	unsigned offset;
+	enum { UWB_EST_16 = 0, UWB_EST_8 = 1 } type;
+};
+
+int uwb_est_register(u8 type, u8 code_high, u16 vendor, u16 product,
+		     const struct uwb_est_entry *, size_t entries);
+int uwb_est_unregister(u8 type, u8 code_high, u16 vendor, u16 product,
+		       const struct uwb_est_entry *, size_t entries);
+ssize_t uwb_est_find_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
+			  size_t len);
+
+/* -- Misc */
+
+enum {
+	EDC_MAX_ERRORS = 10,
+	EDC_ERROR_TIMEFRAME = HZ,
+};
+
+/* error density counter */
+struct edc {
+	unsigned long timestart;
+	u16 errorcount;
+};
+
+static inline
+void edc_init(struct edc *edc)
+{
+	edc->timestart = jiffies;
+}
+
+/* Called when an error occured.
+ * This is way to determine if the number of acceptable errors per time
+ * period has been exceeded. It is not accurate as there are cases in which
+ * this scheme will not work, for example if there are periodic occurences
+ * of errors that straddle updates to the start time. This scheme is
+ * sufficient for our usage.
+ *
+ * @returns 1 if maximum acceptable errors per timeframe has been exceeded.
+ */
+static inline int edc_inc(struct edc *err_hist, u16 max_err, u16 timeframe)
+{
+	unsigned long now;
+
+	now = jiffies;
+	if (now - err_hist->timestart > timeframe) {
+		err_hist->errorcount = 1;
+		err_hist->timestart = now;
+	} else if (++err_hist->errorcount > max_err) {
+			err_hist->errorcount = 0;
+			err_hist->timestart = now;
+			return 1;
+	}
+	return 0;
+}
+
+
+/* Information Element handling */
+
+/* For representing the state of writing to a buffer when iterating */
+struct uwb_buf_ctx {
+	char *buf;
+	size_t bytes, size;
+};
+
+typedef int (*uwb_ie_f)(struct uwb_dev *, const struct uwb_ie_hdr *,
+			size_t, void *);
+struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len);
+ssize_t uwb_ie_for_each(struct uwb_dev *uwb_dev, uwb_ie_f fn, void *data,
+			const void *buf, size_t size);
+int uwb_ie_dump_hex(struct uwb_dev *, const struct uwb_ie_hdr *,
+		    size_t, void *);
+int uwb_rc_set_ie(struct uwb_rc *, struct uwb_rc_cmd_set_ie *);
+struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len);
+
+
+/*
+ * Transmission statistics
+ *
+ * UWB uses LQI and RSSI (one byte values) for reporting radio signal
+ * strength and line quality indication. We do quick and dirty
+ * averages of those. They are signed values, btw.
+ *
+ * For 8 bit quantities, we keep the min, the max, an accumulator
+ * (@sigma) and a # of samples. When @samples gets to 255, we compute
+ * the average (@sigma / @samples), place it in @sigma and reset
+ * @samples to 1 (so we use it as the first sample).
+ *
+ * Now, statistically speaking, probably I am kicking the kidneys of
+ * some books I have in my shelves collecting dust, but I just want to
+ * get an approx, not the Nobel.
+ *
+ * LOCKING: there is no locking per se, but we try to keep a lockless
+ * schema. Only _add_samples() modifies the values--as long as you
+ * have other locking on top that makes sure that no two calls of
+ * _add_sample() happen at the same time, then we are fine. Now, for
+ * resetting the values we just set @samples to 0 and that makes the
+ * next _add_sample() to start with defaults. Reading the values in
+ * _show() currently can race, so you need to make sure the calls are
+ * under the same lock that protects calls to _add_sample(). FIXME:
+ * currently unlocked (It is not ultraprecise but does the trick. Bite
+ * me).
+ */
+struct stats {
+	s8 min, max;
+	s16 sigma;
+	atomic_t samples;
+};
+
+static inline
+void stats_init(struct stats *stats)
+{
+	atomic_set(&stats->samples, 0);
+	wmb();
+}
+
+static inline
+void stats_add_sample(struct stats *stats, s8 sample)
+{
+	s8 min, max;
+	s16 sigma;
+	unsigned samples = atomic_read(&stats->samples);
+	if (samples == 0) {	/* it was zero before, so we initialize */
+		min = 127;
+		max = -128;
+		sigma = 0;
+	} else {
+		min = stats->min;
+		max = stats->max;
+		sigma = stats->sigma;
+	}
+
+	if (sample < min)	/* compute new values */
+		min = sample;
+	else if (sample > max)
+		max = sample;
+	sigma += sample;
+
+	stats->min = min;	/* commit */
+	stats->max = max;
+	stats->sigma = sigma;
+	if (atomic_add_return(1, &stats->samples) > 255) {
+		/* wrapped around! reset */
+		stats->sigma = sigma / 256;
+		atomic_set(&stats->samples, 1);
+	}
+}
+
+static inline ssize_t stats_show(struct stats *stats, char *buf)
+{
+	int min, max, avg;
+	int samples = atomic_read(&stats->samples);
+	if (samples == 0)
+		min = max = avg = 0;
+	else {
+		min = stats->min;
+		max = stats->max;
+		avg = stats->sigma / samples;
+	}
+	return scnprintf(buf, PAGE_SIZE, "%d %d %d\n", min, max, avg);
+}
+
+static inline ssize_t stats_store(struct stats *stats, const char *buf,
+				  size_t size)
+{
+	stats_init(stats);
+	return size;
+}
+
+#endif /* #ifndef __LINUX__UWB_H__ */
diff --git a/include/linux/uwb/debug-cmd.h b/include/linux/uwb/debug-cmd.h
new file mode 100644
index 0000000..1141f41
--- /dev/null
+++ b/include/linux/uwb/debug-cmd.h
@@ -0,0 +1,57 @@
+/*
+ * Ultra Wide Band
+ * Debug interface commands
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __LINUX__UWB__DEBUG_CMD_H__
+#define __LINUX__UWB__DEBUG_CMD_H__
+
+#include <linux/types.h>
+
+/*
+ * Debug interface commands
+ *
+ * UWB_DBG_CMD_RSV_ESTABLISH: Establish a new unicast reservation.
+ *
+ * UWB_DBG_CMD_RSV_TERMINATE: Terminate the Nth reservation.
+ */
+
+enum uwb_dbg_cmd_type {
+	UWB_DBG_CMD_RSV_ESTABLISH = 1,
+	UWB_DBG_CMD_RSV_TERMINATE = 2,
+};
+
+struct uwb_dbg_cmd_rsv_establish {
+	__u8  target[6];
+	__u8  type;
+	__u16 max_mas;
+	__u16 min_mas;
+	__u8  sparsity;
+};
+
+struct uwb_dbg_cmd_rsv_terminate {
+	int index;
+};
+
+struct uwb_dbg_cmd {
+	__u32 type;
+	union {
+		struct uwb_dbg_cmd_rsv_establish rsv_establish;
+		struct uwb_dbg_cmd_rsv_terminate rsv_terminate;
+	};
+};
+
+#endif /* #ifndef __LINUX__UWB__DEBUG_CMD_H__ */
diff --git a/include/linux/uwb/debug.h b/include/linux/uwb/debug.h
new file mode 100644
index 0000000..a86a73f
--- /dev/null
+++ b/include/linux/uwb/debug.h
@@ -0,0 +1,82 @@
+/*
+ * Ultra Wide Band
+ * Debug Support
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: doc
+ * Invoke like:
+ *
+ * #define D_LOCAL 4
+ * #include <linux/uwb/debug.h>
+ *
+ * At the end of your include files.
+ */
+#include <linux/types.h>
+
+struct device;
+extern void dump_bytes(struct device *dev, const void *_buf, size_t rsize);
+
+/* Master debug switch; !0 enables, 0 disables */
+#define D_MASTER (!0)
+
+/* Local (per-file) debug switch; #define before #including */
+#ifndef D_LOCAL
+#define D_LOCAL 0
+#endif
+
+#undef __d_printf
+#undef d_fnstart
+#undef d_fnend
+#undef d_printf
+#undef d_dump
+
+#define __d_printf(l, _tag, _dev, f, a...)				\
+do {									\
+	struct device *__dev = (_dev);					\
+	if (D_MASTER && D_LOCAL >= (l)) {				\
+		char __head[64] = "";					\
+		if (_dev != NULL) {					\
+			if ((unsigned long)__dev < 4096)		\
+				printk(KERN_ERR "E: Corrupt dev %p\n",	\
+					__dev);				\
+			else						\
+				snprintf(__head, sizeof(__head),	\
+					 "%s %s: ",			\
+					 dev_driver_string(__dev),	\
+					 __dev->bus_id);		\
+		}							\
+		printk(KERN_ERR "%s%s" _tag ": " f, __head,		\
+			__func__, ## a);				\
+	}								\
+} while (0 && _dev)
+
+#define d_fnstart(l, _dev, f, a...)	\
+	__d_printf(l, " FNSTART", _dev, f, ## a)
+#define d_fnend(l, _dev, f, a...)	\
+	__d_printf(l, " FNEND", _dev, f, ## a)
+#define d_printf(l, _dev, f, a...)	\
+	__d_printf(l, "", _dev, f, ## a)
+#define d_dump(l, _dev, ptr, size)		\
+do {						\
+	struct device *__dev = _dev;		\
+	if (D_MASTER && D_LOCAL >= (l))		\
+		dump_bytes(__dev, ptr, size);	\
+} while (0 && _dev)
+#define d_test(l) (D_MASTER && D_LOCAL >= (l))
diff --git a/include/linux/uwb/spec.h b/include/linux/uwb/spec.h
new file mode 100644
index 0000000..198c15f
--- /dev/null
+++ b/include/linux/uwb/spec.h
@@ -0,0 +1,727 @@
+/*
+ * Ultra Wide Band
+ * UWB Standard definitions
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * All these definitions are based on the ECMA-368 standard.
+ *
+ * Note all definitions are Little Endian in the wire, and we will
+ * convert them to host order before operating on the bitfields (that
+ * yes, we use extensively).
+ */
+
+#ifndef __LINUX__UWB_SPEC_H__
+#define __LINUX__UWB_SPEC_H__
+
+#include <linux/types.h>
+#include <linux/bitmap.h>
+
+#define i1480_FW 0x00000303
+/* #define i1480_FW 0x00000302 */
+
+/**
+ * Number of Medium Access Slots in a superframe.
+ *
+ * UWB divides time in SuperFrames, each one divided in 256 pieces, or
+ * Medium Access Slots. See MBOA MAC[5.4.5] for details. The MAS is the
+ * basic bandwidth allocation unit in UWB.
+ */
+enum { UWB_NUM_MAS = 256 };
+
+/**
+ * Number of Zones in superframe.
+ *
+ * UWB divides the superframe into zones with numbering starting from BPST.
+ * See MBOA MAC[16.8.6]
+ */
+enum { UWB_NUM_ZONES = 16 };
+
+/*
+ * Number of MAS in a zone.
+ */
+#define UWB_MAS_PER_ZONE (UWB_NUM_MAS / UWB_NUM_ZONES)
+
+/*
+ * Number of streams per DRP reservation between a pair of devices.
+ *
+ * [ECMA-368] section 16.8.6.
+ */
+enum { UWB_NUM_STREAMS = 8 };
+
+/*
+ * mMasLength
+ *
+ * The length of a MAS in microseconds.
+ *
+ * [ECMA-368] section 17.16.
+ */
+enum { UWB_MAS_LENGTH_US = 256 };
+
+/*
+ * mBeaconSlotLength
+ *
+ * The length of the beacon slot in microseconds.
+ *
+ * [ECMA-368] section 17.16
+ */
+enum { UWB_BEACON_SLOT_LENGTH_US = 85 };
+
+/*
+ * mMaxLostBeacons
+ *
+ * The number beacons missing in consecutive superframes before a
+ * device can be considered as unreachable.
+ *
+ * [ECMA-368] section 17.16
+ */
+enum { UWB_MAX_LOST_BEACONS = 3 };
+
+/*
+ * Length of a superframe in microseconds.
+ */
+#define UWB_SUPERFRAME_LENGTH_US (UWB_MAS_LENGTH_US * UWB_NUM_MAS)
+
+/**
+ * UWB MAC address
+ *
+ * It is *imperative* that this struct is exactly 6 packed bytes (as
+ * it is also used to define headers sent down and up the wire/radio).
+ */
+struct uwb_mac_addr {
+	u8 data[6];
+} __attribute__((packed));
+
+
+/**
+ * UWB device address
+ *
+ * It is *imperative* that this struct is exactly 6 packed bytes (as
+ * it is also used to define headers sent down and up the wire/radio).
+ */
+struct uwb_dev_addr {
+	u8 data[2];
+} __attribute__((packed));
+
+
+/**
+ * Types of UWB addresses
+ *
+ * Order matters (by size).
+ */
+enum uwb_addr_type {
+	UWB_ADDR_DEV = 0,
+	UWB_ADDR_MAC = 1,
+};
+
+
+/** Size of a char buffer for printing a MAC/device address */
+enum { UWB_ADDR_STRSIZE = 32 };
+
+
+/** UWB WiMedia protocol IDs. */
+enum uwb_prid {
+	UWB_PRID_WLP_RESERVED   = 0x0000,
+	UWB_PRID_WLP		= 0x0001,
+	UWB_PRID_WUSB_BOT	= 0x0010,
+	UWB_PRID_WUSB		= 0x0010,
+	UWB_PRID_WUSB_TOP	= 0x001F,
+};
+
+
+/** PHY Rate (MBOA MAC[7.8.12, Table 61]) */
+enum uwb_phy_rate {
+	UWB_PHY_RATE_53 = 0,
+	UWB_PHY_RATE_80,
+	UWB_PHY_RATE_106,
+	UWB_PHY_RATE_160,
+	UWB_PHY_RATE_200,
+	UWB_PHY_RATE_320,
+	UWB_PHY_RATE_400,
+	UWB_PHY_RATE_480,
+	UWB_PHY_RATE_INVALID
+};
+
+
+/**
+ * Different ways to scan (MBOA MAC[6.2.2, Table 8], WUSB[Table 8-78])
+ */
+enum uwb_scan_type {
+	UWB_SCAN_ONLY = 0,
+	UWB_SCAN_OUTSIDE_BP,
+	UWB_SCAN_WHILE_INACTIVE,
+	UWB_SCAN_DISABLED,
+	UWB_SCAN_ONLY_STARTTIME,
+	UWB_SCAN_TOP
+};
+
+
+/** ACK Policy types (MBOA MAC[7.2.1.3]) */
+enum uwb_ack_pol {
+	UWB_ACK_NO = 0,
+	UWB_ACK_INM = 1,
+	UWB_ACK_B = 2,
+	UWB_ACK_B_REQ = 3,
+};
+
+
+/** DRP reservation types ([ECMA-368 table 106) */
+enum uwb_drp_type {
+	UWB_DRP_TYPE_ALIEN_BP = 0,
+	UWB_DRP_TYPE_HARD,
+	UWB_DRP_TYPE_SOFT,
+	UWB_DRP_TYPE_PRIVATE,
+	UWB_DRP_TYPE_PCA,
+};
+
+
+/** DRP Reason Codes ([ECMA-368] table 107) */
+enum uwb_drp_reason {
+	UWB_DRP_REASON_ACCEPTED = 0,
+	UWB_DRP_REASON_CONFLICT,
+	UWB_DRP_REASON_PENDING,
+	UWB_DRP_REASON_DENIED,
+	UWB_DRP_REASON_MODIFIED,
+};
+
+/**
+ *  DRP Notification Reason Codes (WHCI 0.95 [3.1.4.9])
+ */
+enum uwb_drp_notif_reason {
+	UWB_DRP_NOTIF_DRP_IE_RCVD = 0,
+	UWB_DRP_NOTIF_CONFLICT,
+	UWB_DRP_NOTIF_TERMINATE,
+};
+
+
+/** Allocation of MAS slots in a DRP request MBOA MAC[7.8.7] */
+struct uwb_drp_alloc {
+	__le16 zone_bm;
+	__le16 mas_bm;
+} __attribute__((packed));
+
+
+/** General MAC Header format (ECMA-368[16.2]) */
+struct uwb_mac_frame_hdr {
+	__le16 Frame_Control;
+	struct uwb_dev_addr DestAddr;
+	struct uwb_dev_addr SrcAddr;
+	__le16 Sequence_Control;
+	__le16 Access_Information;
+} __attribute__((packed));
+
+
+/**
+ * uwb_beacon_frame - a beacon frame including MAC headers
+ *
+ * [ECMA] section 16.3.
+ */
+struct uwb_beacon_frame {
+	struct uwb_mac_frame_hdr hdr;
+	struct uwb_mac_addr Device_Identifier;	/* may be a NULL EUI-48 */
+	u8 Beacon_Slot_Number;
+	u8 Device_Control;
+	u8 IEData[];
+} __attribute__((packed));
+
+
+/** Information Element codes (MBOA MAC[T54]) */
+enum uwb_ie {
+	UWB_PCA_AVAILABILITY = 2,
+	UWB_IE_DRP_AVAILABILITY = 8,
+	UWB_IE_DRP = 9,
+	UWB_BP_SWITCH_IE = 11,
+	UWB_MAC_CAPABILITIES_IE = 12,
+	UWB_PHY_CAPABILITIES_IE = 13,
+	UWB_APP_SPEC_PROBE_IE = 15,
+	UWB_IDENTIFICATION_IE = 19,
+	UWB_MASTER_KEY_ID_IE = 20,
+	UWB_IE_WLP = 250, /* WiMedia Logical Link Control Protocol WLP 0.99 */
+	UWB_APP_SPEC_IE = 255,
+};
+
+
+/**
+ * Header common to all Information Elements (IEs)
+ */
+struct uwb_ie_hdr {
+	u8 element_id;	/* enum uwb_ie */
+	u8 length;
+} __attribute__((packed));
+
+
+/** Dynamic Reservation Protocol IE (MBOA MAC[7.8.6]) */
+struct uwb_ie_drp {
+	struct uwb_ie_hdr	hdr;
+	__le16                  drp_control;
+	struct uwb_dev_addr	dev_addr;
+	struct uwb_drp_alloc	allocs[];
+} __attribute__((packed));
+
+static inline int uwb_ie_drp_type(struct uwb_ie_drp *ie)
+{
+	return (le16_to_cpu(ie->drp_control) >> 0) & 0x7;
+}
+
+static inline int uwb_ie_drp_stream_index(struct uwb_ie_drp *ie)
+{
+	return (le16_to_cpu(ie->drp_control) >> 3) & 0x7;
+}
+
+static inline int uwb_ie_drp_reason_code(struct uwb_ie_drp *ie)
+{
+	return (le16_to_cpu(ie->drp_control) >> 6) & 0x7;
+}
+
+static inline int uwb_ie_drp_status(struct uwb_ie_drp *ie)
+{
+	return (le16_to_cpu(ie->drp_control) >> 9) & 0x1;
+}
+
+static inline int uwb_ie_drp_owner(struct uwb_ie_drp *ie)
+{
+	return (le16_to_cpu(ie->drp_control) >> 10) & 0x1;
+}
+
+static inline int uwb_ie_drp_tiebreaker(struct uwb_ie_drp *ie)
+{
+	return (le16_to_cpu(ie->drp_control) >> 11) & 0x1;
+}
+
+static inline int uwb_ie_drp_unsafe(struct uwb_ie_drp *ie)
+{
+	return (le16_to_cpu(ie->drp_control) >> 12) & 0x1;
+}
+
+static inline void uwb_ie_drp_set_type(struct uwb_ie_drp *ie, enum uwb_drp_type type)
+{
+	u16 drp_control = le16_to_cpu(ie->drp_control);
+	drp_control = (drp_control & ~(0x7 << 0)) | (type << 0);
+	ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_stream_index(struct uwb_ie_drp *ie, int stream_index)
+{
+	u16 drp_control = le16_to_cpu(ie->drp_control);
+	drp_control = (drp_control & ~(0x7 << 3)) | (stream_index << 3);
+	ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_reason_code(struct uwb_ie_drp *ie,
+				       enum uwb_drp_reason reason_code)
+{
+	u16 drp_control = le16_to_cpu(ie->drp_control);
+	drp_control = (ie->drp_control & ~(0x7 << 6)) | (reason_code << 6);
+	ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_status(struct uwb_ie_drp *ie, int status)
+{
+	u16 drp_control = le16_to_cpu(ie->drp_control);
+	drp_control = (drp_control & ~(0x1 << 9)) | (status << 9);
+	ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_owner(struct uwb_ie_drp *ie, int owner)
+{
+	u16 drp_control = le16_to_cpu(ie->drp_control);
+	drp_control = (drp_control & ~(0x1 << 10)) | (owner << 10);
+	ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_tiebreaker(struct uwb_ie_drp *ie, int tiebreaker)
+{
+	u16 drp_control = le16_to_cpu(ie->drp_control);
+	drp_control = (drp_control & ~(0x1 << 11)) | (tiebreaker << 11);
+	ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_unsafe(struct uwb_ie_drp *ie, int unsafe)
+{
+	u16 drp_control = le16_to_cpu(ie->drp_control);
+	drp_control = (drp_control & ~(0x1 << 12)) | (unsafe << 12);
+	ie->drp_control = cpu_to_le16(drp_control);
+}
+
+/** Dynamic Reservation Protocol IE (MBOA MAC[7.8.7]) */
+struct uwb_ie_drp_avail {
+	struct uwb_ie_hdr	hdr;
+	DECLARE_BITMAP(bmp, UWB_NUM_MAS);
+} __attribute__((packed));
+
+/**
+ * The Vendor ID is set to an OUI that indicates the vendor of the device.
+ * ECMA-368 [16.8.10]
+ */
+struct uwb_vendor_id {
+	u8 data[3];
+} __attribute__((packed));
+
+/**
+ * The device type ID
+ * FIXME: clarify what this means
+ * ECMA-368 [16.8.10]
+ */
+struct uwb_device_type_id {
+	u8 data[3];
+} __attribute__((packed));
+
+
+/**
+ * UWB device information types
+ * ECMA-368 [16.8.10]
+ */
+enum uwb_dev_info_type {
+	UWB_DEV_INFO_VENDOR_ID = 0,
+	UWB_DEV_INFO_VENDOR_TYPE,
+	UWB_DEV_INFO_NAME,
+};
+
+/**
+ * UWB device information found in Identification IE
+ * ECMA-368 [16.8.10]
+ */
+struct uwb_dev_info {
+	u8 type;	/* enum uwb_dev_info_type */
+	u8 length;
+	u8 data[];
+} __attribute__((packed));
+
+/**
+ * UWB Identification IE
+ * ECMA-368 [16.8.10]
+ */
+struct uwb_identification_ie {
+	struct uwb_ie_hdr hdr;
+	struct uwb_dev_info info[];
+} __attribute__((packed));
+
+/*
+ * UWB Radio Controller
+ *
+ * These definitions are common to the Radio Control layers as
+ * exported by the WUSB1.0 HWA and WHCI interfaces.
+ */
+
+/** Radio Control Command Block (WUSB1.0[Table 8-65] and WHCI 0.95) */
+struct uwb_rccb {
+	u8 bCommandType;		/* enum hwa_cet */
+	__le16 wCommand;		/* Command code */
+	u8 bCommandContext;		/* Context ID */
+} __attribute__((packed));
+
+
+/** Radio Control Event Block (WUSB[table 8-66], WHCI 0.95) */
+struct uwb_rceb {
+	u8 bEventType;			/* enum hwa_cet */
+	__le16 wEvent;			/* Event code */
+	u8 bEventContext;		/* Context ID */
+} __attribute__((packed));
+
+
+enum {
+	UWB_RC_CET_GENERAL = 0,		/* General Command/Event type */
+	UWB_RC_CET_EX_TYPE_1 = 1,	/* Extended Type 1 Command/Event type */
+};
+
+/* Commands to the radio controller */
+enum uwb_rc_cmd {
+	UWB_RC_CMD_CHANNEL_CHANGE = 16,
+	UWB_RC_CMD_DEV_ADDR_MGMT = 17,	/* Device Address Management */
+	UWB_RC_CMD_GET_IE = 18,		/* GET Information Elements */
+	UWB_RC_CMD_RESET = 19,
+	UWB_RC_CMD_SCAN = 20,		/* Scan management  */
+	UWB_RC_CMD_SET_BEACON_FILTER = 21,
+	UWB_RC_CMD_SET_DRP_IE = 22,	/* Dynamic Reservation Protocol IEs */
+	UWB_RC_CMD_SET_IE = 23,		/* Information Element management */
+	UWB_RC_CMD_SET_NOTIFICATION_FILTER = 24,
+	UWB_RC_CMD_SET_TX_POWER = 25,
+	UWB_RC_CMD_SLEEP = 26,
+	UWB_RC_CMD_START_BEACON = 27,
+	UWB_RC_CMD_STOP_BEACON = 28,
+	UWB_RC_CMD_BP_MERGE = 29,
+	UWB_RC_CMD_SEND_COMMAND_FRAME = 30,
+	UWB_RC_CMD_SET_ASIE_NOTIF = 31,
+};
+
+/* Notifications from the radio controller */
+enum uwb_rc_evt {
+	UWB_RC_EVT_IE_RCV = 0,
+	UWB_RC_EVT_BEACON = 1,
+	UWB_RC_EVT_BEACON_SIZE = 2,
+	UWB_RC_EVT_BPOIE_CHANGE = 3,
+	UWB_RC_EVT_BP_SLOT_CHANGE = 4,
+	UWB_RC_EVT_BP_SWITCH_IE_RCV = 5,
+	UWB_RC_EVT_DEV_ADDR_CONFLICT = 6,
+	UWB_RC_EVT_DRP_AVAIL = 7,
+	UWB_RC_EVT_DRP = 8,
+	UWB_RC_EVT_BP_SWITCH_STATUS = 9,
+	UWB_RC_EVT_CMD_FRAME_RCV = 10,
+	UWB_RC_EVT_CHANNEL_CHANGE_IE_RCV = 11,
+	/* Events (command responses) use the same code as the command */
+	UWB_RC_EVT_UNKNOWN_CMD_RCV = 65535,
+};
+
+enum uwb_rc_extended_type_1_cmd {
+	UWB_RC_SET_DAA_ENERGY_MASK = 32,
+	UWB_RC_SET_NOTIFICATION_FILTER_EX = 33,
+};
+
+enum uwb_rc_extended_type_1_evt {
+	UWB_RC_DAA_ENERGY_DETECTED = 0,
+};
+
+/* Radio Control Result Code. [WHCI] table 3-3. */
+enum {
+	UWB_RC_RES_SUCCESS = 0,
+	UWB_RC_RES_FAIL,
+	UWB_RC_RES_FAIL_HARDWARE,
+	UWB_RC_RES_FAIL_NO_SLOTS,
+	UWB_RC_RES_FAIL_BEACON_TOO_LARGE,
+	UWB_RC_RES_FAIL_INVALID_PARAMETER,
+	UWB_RC_RES_FAIL_UNSUPPORTED_PWR_LEVEL,
+	UWB_RC_RES_FAIL_INVALID_IE_DATA,
+	UWB_RC_RES_FAIL_BEACON_SIZE_EXCEEDED,
+	UWB_RC_RES_FAIL_CANCELLED,
+	UWB_RC_RES_FAIL_INVALID_STATE,
+	UWB_RC_RES_FAIL_INVALID_SIZE,
+	UWB_RC_RES_FAIL_ACK_NOT_RECEIVED,
+	UWB_RC_RES_FAIL_NO_MORE_ASIE_NOTIF,
+	UWB_RC_RES_FAIL_TIME_OUT = 255,
+};
+
+/* Confirm event. [WHCI] section 3.1.3.1 etc. */
+struct uwb_rc_evt_confirm {
+	struct uwb_rceb rceb;
+	u8 bResultCode;
+} __attribute__((packed));
+
+/* Device Address Management event. [WHCI] section 3.1.3.2. */
+struct uwb_rc_evt_dev_addr_mgmt {
+	struct uwb_rceb rceb;
+	u8 baAddr[6];
+	u8 bResultCode;
+} __attribute__((packed));
+
+
+/* Get IE Event. [WHCI] section 3.1.3.3. */
+struct uwb_rc_evt_get_ie {
+	struct uwb_rceb rceb;
+	__le16 wIELength;
+	u8 IEData[];
+} __attribute__((packed));
+
+/* Set DRP IE Event. [WHCI] section 3.1.3.7. */
+struct uwb_rc_evt_set_drp_ie {
+	struct uwb_rceb rceb;
+	__le16 wRemainingSpace;
+	u8 bResultCode;
+} __attribute__((packed));
+
+/* Set IE Event. [WHCI] section 3.1.3.8. */
+struct uwb_rc_evt_set_ie {
+	struct uwb_rceb rceb;
+	__le16 RemainingSpace;
+	u8 bResultCode;
+} __attribute__((packed));
+
+/* Scan command. [WHCI] 3.1.3.5. */
+struct uwb_rc_cmd_scan {
+	struct uwb_rccb rccb;
+	u8 bChannelNumber;
+	u8 bScanState;
+	__le16 wStartTime;
+} __attribute__((packed));
+
+/* Set DRP IE command. [WHCI] section 3.1.3.7. */
+struct uwb_rc_cmd_set_drp_ie {
+	struct uwb_rccb rccb;
+	__le16 wIELength;
+	struct uwb_ie_drp IEData[];
+} __attribute__((packed));
+
+/* Set IE command. [WHCI] section 3.1.3.8. */
+struct uwb_rc_cmd_set_ie {
+	struct uwb_rccb rccb;
+	__le16 wIELength;
+	u8 IEData[];
+} __attribute__((packed));
+
+/* Set DAA Energy Mask event. [WHCI 0.96] section 3.1.3.17. */
+struct uwb_rc_evt_set_daa_energy_mask {
+	struct uwb_rceb rceb;
+	__le16 wLength;
+	u8 result;
+} __attribute__((packed));
+
+/* Set Notification Filter Extended event. [WHCI 0.96] section 3.1.3.18. */
+struct uwb_rc_evt_set_notification_filter_ex {
+	struct uwb_rceb rceb;
+	__le16 wLength;
+	u8 result;
+} __attribute__((packed));
+
+/* IE Received notification. [WHCI] section 3.1.4.1. */
+struct uwb_rc_evt_ie_rcv {
+	struct uwb_rceb rceb;
+	struct uwb_dev_addr SrcAddr;
+	__le16 wIELength;
+	u8 IEData[];
+} __attribute__((packed));
+
+/* Type of the received beacon. [WHCI] section 3.1.4.2. */
+enum uwb_rc_beacon_type {
+	UWB_RC_BEACON_TYPE_SCAN = 0,
+	UWB_RC_BEACON_TYPE_NEIGHBOR,
+	UWB_RC_BEACON_TYPE_OL_ALIEN,
+	UWB_RC_BEACON_TYPE_NOL_ALIEN,
+};
+
+/* Beacon received notification. [WHCI] 3.1.4.2. */
+struct uwb_rc_evt_beacon {
+	struct uwb_rceb rceb;
+	u8	bChannelNumber;
+	u8	bBeaconType;
+	__le16	wBPSTOffset;
+	u8	bLQI;
+	u8	bRSSI;
+	__le16	wBeaconInfoLength;
+	u8	BeaconInfo[];
+} __attribute__((packed));
+
+
+/* Beacon Size Change notification. [WHCI] section 3.1.4.3 */
+struct uwb_rc_evt_beacon_size {
+	struct uwb_rceb rceb;
+	__le16 wNewBeaconSize;
+} __attribute__((packed));
+
+
+/* BPOIE Change notification. [WHCI] section 3.1.4.4. */
+struct uwb_rc_evt_bpoie_change {
+	struct uwb_rceb rceb;
+	__le16 wBPOIELength;
+	u8 BPOIE[];
+} __attribute__((packed));
+
+
+/* Beacon Slot Change notification. [WHCI] section 3.1.4.5. */
+struct uwb_rc_evt_bp_slot_change {
+	struct uwb_rceb rceb;
+	u8 slot_info;
+} __attribute__((packed));
+
+static inline int uwb_rc_evt_bp_slot_change_slot_num(
+	const struct uwb_rc_evt_bp_slot_change *evt)
+{
+	return evt->slot_info & 0x7f;
+}
+
+static inline int uwb_rc_evt_bp_slot_change_no_slot(
+	const struct uwb_rc_evt_bp_slot_change *evt)
+{
+	return (evt->slot_info & 0x80) >> 7;
+}
+
+/* BP Switch IE Received notification. [WHCI] section 3.1.4.6. */
+struct uwb_rc_evt_bp_switch_ie_rcv {
+	struct uwb_rceb rceb;
+	struct uwb_dev_addr wSrcAddr;
+	__le16 wIELength;
+	u8 IEData[];
+} __attribute__((packed));
+
+/* DevAddr Conflict notification. [WHCI] section 3.1.4.7. */
+struct uwb_rc_evt_dev_addr_conflict {
+	struct uwb_rceb rceb;
+} __attribute__((packed));
+
+/* DRP notification. [WHCI] section 3.1.4.9. */
+struct uwb_rc_evt_drp {
+	struct uwb_rceb           rceb;
+	struct uwb_dev_addr       src_addr;
+	u8                        reason;
+	u8                        beacon_slot_number;
+	__le16                    ie_length;
+	u8                        ie_data[];
+} __attribute__((packed));
+
+static inline enum uwb_drp_notif_reason uwb_rc_evt_drp_reason(struct uwb_rc_evt_drp *evt)
+{
+	return evt->reason & 0x0f;
+}
+
+
+/* DRP Availability Change notification. [WHCI] section 3.1.4.8. */
+struct uwb_rc_evt_drp_avail {
+	struct uwb_rceb rceb;
+	DECLARE_BITMAP(bmp, UWB_NUM_MAS);
+} __attribute__((packed));
+
+/* BP switch status notification. [WHCI] section 3.1.4.10. */
+struct uwb_rc_evt_bp_switch_status {
+	struct uwb_rceb rceb;
+	u8 status;
+	u8 slot_offset;
+	__le16 bpst_offset;
+	u8 move_countdown;
+} __attribute__((packed));
+
+/* Command Frame Received notification. [WHCI] section 3.1.4.11. */
+struct uwb_rc_evt_cmd_frame_rcv {
+	struct uwb_rceb rceb;
+	__le16 receive_time;
+	struct uwb_dev_addr wSrcAddr;
+	struct uwb_dev_addr wDstAddr;
+	__le16 control;
+	__le16 reserved;
+	__le16 dataLength;
+	u8 data[];
+} __attribute__((packed));
+
+/* Channel Change IE Received notification. [WHCI] section 3.1.4.12. */
+struct uwb_rc_evt_channel_change_ie_rcv {
+	struct uwb_rceb rceb;
+	struct uwb_dev_addr wSrcAddr;
+	__le16 wIELength;
+	u8 IEData[];
+} __attribute__((packed));
+
+/* DAA Energy Detected notification. [WHCI 0.96] section 3.1.4.14. */
+struct uwb_rc_evt_daa_energy_detected {
+	struct uwb_rceb rceb;
+	__le16 wLength;
+	u8 bandID;
+	u8 reserved;
+	u8 toneBmp[16];
+} __attribute__((packed));
+
+
+/**
+ * Radio Control Interface Class Descriptor
+ *
+ *  WUSB 1.0 [8.6.1.2]
+ */
+struct uwb_rc_control_intf_class_desc {
+	u8 bLength;
+	u8 bDescriptorType;
+	__le16 bcdRCIVersion;
+} __attribute__((packed));
+
+#endif /* #ifndef __LINUX__UWB_SPEC_H__ */
diff --git a/include/linux/uwb/umc.h b/include/linux/uwb/umc.h
new file mode 100644
index 0000000..36a39e3
--- /dev/null
+++ b/include/linux/uwb/umc.h
@@ -0,0 +1,194 @@
+/*
+ * UWB Multi-interface Controller support.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This file is released under the GPLv2
+ *
+ * UMC (UWB Multi-interface Controller) capabilities (e.g., radio
+ * controller, host controller) are presented as devices on the "umc"
+ * bus.
+ *
+ * The radio controller is not strictly a UMC capability but it's
+ * useful to present it as such.
+ *
+ * References:
+ *
+ *   [WHCI] Wireless Host Controller Interface Specification for
+ *          Certified Wireless Universal Serial Bus, revision 0.95.
+ *
+ * How this works is kind of convoluted but simple. The whci.ko driver
+ * loads when WHCI devices are detected. These WHCI devices expose
+ * many devices in the same PCI function (they couldn't have reused
+ * functions, no), so for each PCI function that exposes these many
+ * devices, whci ceates a umc_dev [whci_probe() -> whci_add_cap()]
+ * with umc_device_create() and adds it to the bus with
+ * umc_device_register().
+ *
+ * umc_device_register() calls device_register() which will push the
+ * bus management code to load your UMC driver's somehting_probe()
+ * that you have registered for that capability code.
+ *
+ * Now when the WHCI device is removed, whci_remove() will go over
+ * each umc_dev assigned to each of the PCI function's capabilities
+ * and through whci_del_cap() call umc_device_unregister() each
+ * created umc_dev. Of course, if you are bound to the device, your
+ * driver's something_remove() will be called.
+ */
+
+#ifndef _LINUX_UWB_UMC_H_
+#define _LINUX_UWB_UMC_H_
+
+#include <linux/device.h>
+#include <linux/pci.h>
+
+/*
+ * UMC capability IDs.
+ *
+ * 0x00 is reserved so use it for the radio controller device.
+ *
+ * [WHCI] table 2-8
+ */
+#define UMC_CAP_ID_WHCI_RC      0x00 /* radio controller */
+#define UMC_CAP_ID_WHCI_WUSB_HC 0x01 /* WUSB host controller */
+
+/**
+ * struct umc_dev - UMC capability device
+ *
+ * @version:  version of the specification this capability conforms to.
+ * @cap_id:   capability ID.
+ * @bar:      PCI Bar (64 bit) where the resource lies
+ * @resource: register space resource.
+ * @irq:      interrupt line.
+ */
+struct umc_dev {
+	u16		version;
+	u8		cap_id;
+	u8		bar;
+	struct resource resource;
+	unsigned	irq;
+	struct device	dev;
+};
+
+#define to_umc_dev(d) container_of(d, struct umc_dev, dev)
+
+/**
+ * struct umc_driver - UMC capability driver
+ * @cap_id: supported capability ID.
+ * @match: driver specific capability matching function.
+ * @match_data: driver specific data for match() (e.g., a
+ * table of pci_device_id's if umc_match_pci_id() is used).
+ */
+struct umc_driver {
+	char *name;
+	u8 cap_id;
+	int (*match)(struct umc_driver *, struct umc_dev *);
+	const void *match_data;
+
+	int  (*probe)(struct umc_dev *);
+	void (*remove)(struct umc_dev *);
+	int  (*suspend)(struct umc_dev *, pm_message_t state);
+	int  (*resume)(struct umc_dev *);
+
+	struct device_driver driver;
+};
+
+#define to_umc_driver(d) container_of(d, struct umc_driver, driver)
+
+extern struct bus_type umc_bus_type;
+
+struct umc_dev *umc_device_create(struct device *parent, int n);
+int __must_check umc_device_register(struct umc_dev *umc);
+void umc_device_unregister(struct umc_dev *umc);
+
+int __must_check __umc_driver_register(struct umc_driver *umc_drv,
+				       struct module *mod,
+				       const char *mod_name);
+
+/**
+ * umc_driver_register - register a UMC capabiltity driver.
+ * @umc_drv:  pointer to the driver.
+ */
+static inline int __must_check umc_driver_register(struct umc_driver *umc_drv)
+{
+	return __umc_driver_register(umc_drv, THIS_MODULE, KBUILD_MODNAME);
+}
+void umc_driver_unregister(struct umc_driver *umc_drv);
+
+/*
+ * Utility function you can use to match (umc_driver->match) against a
+ * null-terminated array of 'struct pci_device_id' in
+ * umc_driver->match_data.
+ */
+int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc);
+
+/**
+ * umc_parent_pci_dev - return the UMC's parent PCI device or NULL if none
+ * @umc_dev: UMC device whose parent PCI device we are looking for
+ *
+ * DIRTY!!! DON'T RELY ON THIS
+ *
+ * FIXME: This is as dirty as it gets, but we need some way to check
+ * the correct type of umc_dev->parent (so that for example, we can
+ * cast to pci_dev). Casting to pci_dev is necesary because at some
+ * point we need to request resources from the device. Mapping is
+ * easily over come (ioremap and stuff are bus agnostic), but hooking
+ * up to some error handlers (such as pci error handlers) might need
+ * this.
+ *
+ * THIS might (probably will) be removed in the future, so don't count
+ * on it.
+ */
+static inline struct pci_dev *umc_parent_pci_dev(struct umc_dev *umc_dev)
+{
+	struct pci_dev *pci_dev = NULL;
+	if (umc_dev->dev.parent->bus == &pci_bus_type)
+		pci_dev = to_pci_dev(umc_dev->dev.parent);
+	return pci_dev;
+}
+
+/**
+ * umc_dev_get() - reference a UMC device.
+ * @umc_dev: Pointer to UMC device.
+ *
+ * NOTE: we are assuming in this whole scheme that the parent device
+ *       is referenced at _probe() time and unreferenced at _remove()
+ *       time by the parent's subsystem.
+ */
+static inline struct umc_dev *umc_dev_get(struct umc_dev *umc_dev)
+{
+	get_device(&umc_dev->dev);
+	return umc_dev;
+}
+
+/**
+ * umc_dev_put() - unreference a UMC device.
+ * @umc_dev: Pointer to UMC device.
+ */
+static inline void umc_dev_put(struct umc_dev *umc_dev)
+{
+	put_device(&umc_dev->dev);
+}
+
+/**
+ * umc_set_drvdata - set UMC device's driver data.
+ * @umc_dev: Pointer to UMC device.
+ * @data:    Data to set.
+ */
+static inline void umc_set_drvdata(struct umc_dev *umc_dev, void *data)
+{
+	dev_set_drvdata(&umc_dev->dev, data);
+}
+
+/**
+ * umc_get_drvdata - recover UMC device's driver data.
+ * @umc_dev: Pointer to UMC device.
+ */
+static inline void *umc_get_drvdata(struct umc_dev *umc_dev)
+{
+	return dev_get_drvdata(&umc_dev->dev);
+}
+
+int umc_controller_reset(struct umc_dev *umc);
+
+#endif /* #ifndef _LINUX_UWB_UMC_H_ */
diff --git a/include/linux/uwb/whci.h b/include/linux/uwb/whci.h
new file mode 100644
index 0000000..915ec23
--- /dev/null
+++ b/include/linux/uwb/whci.h
@@ -0,0 +1,117 @@
+/*
+ * Wireless Host Controller Interface for Ultra-Wide-Band and Wireless USB
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ *
+ * References:
+ *   [WHCI] Wireless Host Controller Interface Specification for
+ *          Certified Wireless Universal Serial Bus, revision 0.95.
+ */
+#ifndef _LINUX_UWB_WHCI_H_
+#define _LINUX_UWB_WHCI_H_
+
+#include <linux/pci.h>
+
+/*
+ * UWB interface capability registers (offsets from UWBBASE)
+ *
+ * [WHCI] section 2.2
+ */
+#define UWBCAPINFO	0x00 /* == UWBCAPDATA(0) */
+#  define UWBCAPINFO_TO_N_CAPS(c)	(((c) >> 0)  & 0xFull)
+#define UWBCAPDATA(n)	(8*(n))
+#  define UWBCAPDATA_TO_VERSION(c)	(((c) >> 32) & 0xFFFFull)
+#  define UWBCAPDATA_TO_OFFSET(c)	(((c) >> 18) & 0x3FFFull)
+#  define UWBCAPDATA_TO_BAR(c)		(((c) >> 16) & 0x3ull)
+#  define UWBCAPDATA_TO_SIZE(c)		((((c) >> 8) & 0xFFull) * sizeof(u32))
+#  define UWBCAPDATA_TO_CAP_ID(c)	(((c) >> 0)  & 0xFFull)
+
+/* Size of the WHCI capability data (including the RC capability) for
+   a device with n capabilities. */
+#define UWBCAPDATA_SIZE(n) (8 + 8*(n))
+
+
+/*
+ * URC registers (offsets from URCBASE)
+ *
+ * [WHCI] section 2.3
+ */
+#define URCCMD		0x00
+#  define URCCMD_RESET		(1 << 31)  /* UMC Hardware reset */
+#  define URCCMD_RS		(1 << 30)  /* Run/Stop */
+#  define URCCMD_EARV		(1 << 29)  /* Event Address Register Valid */
+#  define URCCMD_ACTIVE		(1 << 15)  /* Command is active */
+#  define URCCMD_IWR		(1 << 14)  /* Interrupt When Ready */
+#  define URCCMD_SIZE_MASK	0x00000fff /* Command size mask */
+#define URCSTS		0x04
+#  define URCSTS_EPS		(1 << 17)  /* Event Processing Status */
+#  define URCSTS_HALTED		(1 << 16)  /* RC halted */
+#  define URCSTS_HSE		(1 << 10)  /* Host System Error...fried */
+#  define URCSTS_ER		(1 <<  9)  /* Event Ready */
+#  define URCSTS_RCI		(1 <<  8)  /* Ready for Command Interrupt */
+#  define URCSTS_INT_MASK	0x00000700 /* URC interrupt sources */
+#  define URCSTS_ISI		0x000000ff /* Interrupt Source Identification */
+#define URCINTR		0x08
+#  define URCINTR_EN_ALL	0x000007ff /* Enable all interrupt sources */
+#define URCCMDADDR	0x10
+#define URCEVTADDR	0x18
+#  define URCEVTADDR_OFFSET_MASK 0xfff    /* Event pointer offset mask */
+
+
+/** Write 32 bit @value to little endian register at @addr */
+static inline
+void le_writel(u32 value, void __iomem *addr)
+{
+	iowrite32(value, addr);
+}
+
+
+/** Read from 32 bit little endian register at @addr */
+static inline
+u32 le_readl(void __iomem *addr)
+{
+	return ioread32(addr);
+}
+
+
+/** Write 64 bit @value to little endian register at @addr */
+static inline
+void le_writeq(u64 value, void __iomem *addr)
+{
+	iowrite32(value, addr);
+	iowrite32(value >> 32, addr + 4);
+}
+
+
+/** Read from 64 bit little endian register at @addr */
+static inline
+u64 le_readq(void __iomem *addr)
+{
+	u64 value;
+	value  = ioread32(addr);
+	value |= (u64)ioread32(addr + 4) << 32;
+	return value;
+}
+
+extern int whci_wait_for(struct device *dev, u32 __iomem *reg,
+			 u32 mask, u32 result,
+			 unsigned long max_ms,  const char *tag);
+
+#endif /* #ifndef _LINUX_UWB_WHCI_H_ */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index d4b0303..4669d7e 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -315,6 +315,13 @@
 /* see http://www.siliconimaging.com/RGB%20Bayer.htm */
 #define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B', 'A', '8', '1') /*  8  BGBG.. GRGR.. */
 #define V4L2_PIX_FMT_SGBRG8  v4l2_fourcc('G', 'B', 'R', 'G') /*  8  GBGB.. RGRG.. */
+/*
+ * 10bit raw bayer, expanded to 16 bits
+ * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
+ */
+#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0')
+/* 10bit raw bayer DPCM compressed to 8 bits */
+#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0')
 #define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16  BGBG.. GRGR.. */
 
 /* compressed formats */
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 4c28c4d..307b885 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -103,6 +103,4 @@
 extern rwlock_t vmlist_lock;
 extern struct vm_struct *vmlist;
 
-extern const struct seq_operations vmalloc_op;
-
 #endif /* _LINUX_VMALLOC_H */
diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h
index 9cd3ab0..524cd1b 100644
--- a/include/linux/vmstat.h
+++ b/include/linux/vmstat.h
@@ -54,10 +54,6 @@
 		NR_VM_EVENT_ITEMS
 };
 
-extern const struct seq_operations fragmentation_op;
-extern const struct seq_operations pagetypeinfo_op;
-extern const struct seq_operations zoneinfo_op;
-extern const struct seq_operations vmstat_op;
 extern int sysctl_stat_interval;
 
 #ifdef CONFIG_VM_EVENT_COUNTERS
diff --git a/include/linux/wlp.h b/include/linux/wlp.h
new file mode 100644
index 0000000..033545e
--- /dev/null
+++ b/include/linux/wlp.h
@@ -0,0 +1,735 @@
+/*
+ * WiMedia Logical Link Control Protocol (WLP)
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Reinette Chatre <reinette.chatre@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * - Does not (yet) include support for WLP control frames
+ *   WLP Draft 0.99 [6.5].
+ *
+ *   A visual representation of the data structures.
+ *
+ *                              wssidB      wssidB
+ *                               ^           ^
+ *                               |           |
+ *                              wssidA      wssidA
+ *   wlp interface {             ^           ^
+ *       ...                     |           |
+ *       ...               ...  wssid      wssid ...
+ *       wlp --- ...             |           |
+ *   };          neighbors --> neighbA --> neighbB
+ *               ...
+ *               wss
+ *               ...
+ *               eda cache  --> neighborA --> neighborB --> neighborC ...
+ */
+
+#ifndef __LINUX__WLP_H_
+#define __LINUX__WLP_H_
+
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/list.h>
+#include <linux/uwb.h>
+
+/**
+ * WLP Protocol ID
+ * WLP Draft 0.99 [6.2]
+ *
+ * The MUX header for all WLP frames
+ */
+#define WLP_PROTOCOL_ID 0x0100
+
+/**
+ * WLP Version
+ * WLP version placed in the association frames (WLP 0.99 [6.6])
+ */
+#define WLP_VERSION 0x10
+
+/**
+ * Bytes needed to print UUID as string
+ */
+#define WLP_WSS_UUID_STRSIZE 48
+
+/**
+ * Bytes needed to print nonce as string
+ */
+#define WLP_WSS_NONCE_STRSIZE 48
+
+
+/**
+ * Size used for WLP name size
+ *
+ * The WSS name is set to 65 bytes, 1 byte larger than the maximum
+ * allowed by the WLP spec. This is to have a null terminated string
+ * for display to the user. A maximum of 64 bytes will still be used
+ * when placing the WSS name field in association frames.
+ */
+#define WLP_WSS_NAME_SIZE 65
+
+/**
+ * Number of bytes added by WLP to data frame
+ *
+ * A data frame transmitted from a host will be placed in a Standard or
+ * Abbreviated WLP frame. These have an extra 4 bytes of header (struct
+ * wlp_frame_std_abbrv_hdr).
+ * When the stack sends this data frame for transmission it needs to ensure
+ * there is enough headroom for this header.
+ */
+#define WLP_DATA_HLEN 4
+
+/**
+ * State of device regarding WLP Service Set
+ *
+ * WLP_WSS_STATE_NONE: the host does not participate in any WSS
+ * WLP_WSS_STATE_PART_ENROLLED: used as part of the enrollment sequence
+ *                            ("Partial Enroll"). This state is used to
+ *                            indicate the first part of enrollment that is
+ *                            unsecure. If the WSS is unsecure then the
+ *                            state will promptly go to WLP_WSS_STATE_ENROLLED,
+ *                            if the WSS is not secure then the enrollment
+ *                            procedure is a few more steps before we are
+ *                            enrolled.
+ * WLP_WSS_STATE_ENROLLED: the host is enrolled in a WSS
+ * WLP_WSS_STATE_ACTIVE: WSS is activated
+ * WLP_WSS_STATE_CONNECTED: host is connected to neighbor in WSS
+ *
+ */
+enum wlp_wss_state {
+	WLP_WSS_STATE_NONE = 0,
+	WLP_WSS_STATE_PART_ENROLLED,
+	WLP_WSS_STATE_ENROLLED,
+	WLP_WSS_STATE_ACTIVE,
+	WLP_WSS_STATE_CONNECTED,
+};
+
+/**
+ * WSS Secure status
+ * WLP 0.99 Table 6
+ *
+ * Set to one if the WSS is secure, zero if it is not secure
+ */
+enum wlp_wss_sec_status {
+	WLP_WSS_UNSECURE = 0,
+	WLP_WSS_SECURE,
+};
+
+/**
+ * WLP frame type
+ * WLP Draft 0.99 [6.2 Table 1]
+ */
+enum wlp_frame_type {
+	WLP_FRAME_STANDARD = 0,
+	WLP_FRAME_ABBREVIATED,
+	WLP_FRAME_CONTROL,
+	WLP_FRAME_ASSOCIATION,
+};
+
+/**
+ * WLP Association Message Type
+ * WLP Draft 0.99 [6.6.1.2 Table 8]
+ */
+enum wlp_assoc_type {
+	WLP_ASSOC_D1 = 2,
+	WLP_ASSOC_D2 = 3,
+	WLP_ASSOC_M1 = 4,
+	WLP_ASSOC_M2 = 5,
+	WLP_ASSOC_M3 = 7,
+	WLP_ASSOC_M4 = 8,
+	WLP_ASSOC_M5 = 9,
+	WLP_ASSOC_M6 = 10,
+	WLP_ASSOC_M7 = 11,
+	WLP_ASSOC_M8 = 12,
+	WLP_ASSOC_F0 = 14,
+	WLP_ASSOC_E1 = 32,
+	WLP_ASSOC_E2 = 33,
+	WLP_ASSOC_C1 = 34,
+	WLP_ASSOC_C2 = 35,
+	WLP_ASSOC_C3 = 36,
+	WLP_ASSOC_C4 = 37,
+};
+
+/**
+ * WLP Attribute Type
+ * WLP Draft 0.99 [6.6.1 Table 6]
+ */
+enum wlp_attr_type {
+	WLP_ATTR_AUTH		= 0x1005, /* Authenticator */
+	WLP_ATTR_DEV_NAME 	= 0x1011, /* Device Name */
+	WLP_ATTR_DEV_PWD_ID 	= 0x1012, /* Device Password ID */
+	WLP_ATTR_E_HASH1	= 0x1014, /* E-Hash1 */
+	WLP_ATTR_E_HASH2	= 0x1015, /* E-Hash2 */
+	WLP_ATTR_E_SNONCE1	= 0x1016, /* E-SNonce1 */
+	WLP_ATTR_E_SNONCE2	= 0x1017, /* E-SNonce2 */
+	WLP_ATTR_ENCR_SET	= 0x1018, /* Encrypted Settings */
+	WLP_ATTR_ENRL_NONCE	= 0x101A, /* Enrollee Nonce */
+	WLP_ATTR_KEYWRAP_AUTH	= 0x101E, /* Key Wrap Authenticator */
+	WLP_ATTR_MANUF		= 0x1021, /* Manufacturer */
+	WLP_ATTR_MSG_TYPE	= 0x1022, /* Message Type */
+	WLP_ATTR_MODEL_NAME	= 0x1023, /* Model Name */
+	WLP_ATTR_MODEL_NR	= 0x1024, /* Model Number */
+	WLP_ATTR_PUB_KEY	= 0x1032, /* Public Key */
+	WLP_ATTR_REG_NONCE	= 0x1039, /* Registrar Nonce */
+	WLP_ATTR_R_HASH1	= 0x103D, /* R-Hash1 */
+	WLP_ATTR_R_HASH2	= 0x103E, /* R-Hash2 */
+	WLP_ATTR_R_SNONCE1	= 0x103F, /* R-SNonce1 */
+	WLP_ATTR_R_SNONCE2	= 0x1040, /* R-SNonce2 */
+	WLP_ATTR_SERIAL		= 0x1042, /* Serial number */
+	WLP_ATTR_UUID_E		= 0x1047, /* UUID-E */
+	WLP_ATTR_UUID_R		= 0x1048, /* UUID-R */
+	WLP_ATTR_PRI_DEV_TYPE	= 0x1054, /* Primary Device Type */
+	WLP_ATTR_SEC_DEV_TYPE	= 0x1055, /* Secondary Device Type */
+	WLP_ATTR_PORT_DEV	= 0x1056, /* Portable Device */
+	WLP_ATTR_APP_EXT	= 0x1058, /* Application Extension */
+	WLP_ATTR_WLP_VER	= 0x2000, /* WLP Version */
+	WLP_ATTR_WSSID		= 0x2001, /* WSSID */
+	WLP_ATTR_WSS_NAME	= 0x2002, /* WSS Name */
+	WLP_ATTR_WSS_SEC_STAT	= 0x2003, /* WSS Secure Status */
+	WLP_ATTR_WSS_BCAST	= 0x2004, /* WSS Broadcast Address */
+	WLP_ATTR_WSS_M_KEY	= 0x2005, /* WSS Master Key */
+	WLP_ATTR_ACC_ENRL	= 0x2006, /* Accepting Enrollment */
+	WLP_ATTR_WSS_INFO	= 0x2007, /* WSS Information */
+	WLP_ATTR_WSS_SEL_MTHD	= 0x2008, /* WSS Selection Method */
+	WLP_ATTR_ASSC_MTHD_LIST	= 0x2009, /* Association Methods List */
+	WLP_ATTR_SEL_ASSC_MTHD	= 0x200A, /* Selected Association Method */
+	WLP_ATTR_ENRL_HASH_COMM	= 0x200B, /* Enrollee Hash Commitment */
+	WLP_ATTR_WSS_TAG	= 0x200C, /* WSS Tag */
+	WLP_ATTR_WSS_VIRT	= 0x200D, /* WSS Virtual EUI-48 */
+	WLP_ATTR_WLP_ASSC_ERR	= 0x200E, /* WLP Association Error */
+	WLP_ATTR_VNDR_EXT	= 0x200F, /* Vendor Extension */
+};
+
+/**
+ * WLP Category ID of primary/secondary device
+ * WLP Draft 0.99 [6.6.1.8 Table 12]
+ */
+enum wlp_dev_category_id {
+	WLP_DEV_CAT_COMPUTER = 1,
+	WLP_DEV_CAT_INPUT,
+	WLP_DEV_CAT_PRINT_SCAN_FAX_COPIER,
+	WLP_DEV_CAT_CAMERA,
+	WLP_DEV_CAT_STORAGE,
+	WLP_DEV_CAT_INFRASTRUCTURE,
+	WLP_DEV_CAT_DISPLAY,
+	WLP_DEV_CAT_MULTIM,
+	WLP_DEV_CAT_GAMING,
+	WLP_DEV_CAT_TELEPHONE,
+	WLP_DEV_CAT_OTHER = 65535,
+};
+
+/**
+ * WLP WSS selection method
+ * WLP Draft 0.99 [6.6.1.6 Table 10]
+ */
+enum wlp_wss_sel_mthd {
+	WLP_WSS_ENRL_SELECT = 1,	/* Enrollee selects */
+	WLP_WSS_REG_SELECT,		/* Registrar selects */
+};
+
+/**
+ * WLP association error values
+ * WLP Draft 0.99 [6.6.1.5 Table 9]
+ */
+enum wlp_assc_error {
+	WLP_ASSOC_ERROR_NONE,
+	WLP_ASSOC_ERROR_AUTH,		/* Authenticator Failure */
+	WLP_ASSOC_ERROR_ROGUE,		/* Rogue activity suspected */
+	WLP_ASSOC_ERROR_BUSY,		/* Device busy */
+	WLP_ASSOC_ERROR_LOCK,		/* Setup Locked */
+	WLP_ASSOC_ERROR_NOT_READY,	/* Registrar not ready */
+	WLP_ASSOC_ERROR_INV,		/* Invalid WSS selection */
+	WLP_ASSOC_ERROR_MSG_TIME,	/* Message timeout */
+	WLP_ASSOC_ERROR_ENR_TIME,	/* Enrollment session timeout */
+	WLP_ASSOC_ERROR_PW,		/* Device password invalid */
+	WLP_ASSOC_ERROR_VER,		/* Unsupported version */
+	WLP_ASSOC_ERROR_INT,		/* Internal error */
+	WLP_ASSOC_ERROR_UNDEF,		/* Undefined error */
+	WLP_ASSOC_ERROR_NUM,		/* Numeric comparison failure */
+	WLP_ASSOC_ERROR_WAIT,		/* Waiting for user input */
+};
+
+/**
+ * WLP Parameters
+ * WLP 0.99 [7.7]
+ */
+enum wlp_parameters {
+	WLP_PER_MSG_TIMEOUT = 15,	/* Seconds to wait for response to
+					   association message. */
+};
+
+/**
+ * WLP IE
+ *
+ * The WLP IE should be included in beacons by all devices.
+ *
+ * The driver can set only a few of the fields in this information element,
+ * most fields are managed by the device self. When the driver needs to set
+ * a field it will only provide values for the fields of interest, the rest
+ * will be filled with zeroes. The fields of interest are:
+ *
+ * Element ID
+ * Length
+ * Capabilities (only to include WSSID Hash list length)
+ * WSSID Hash List fields
+ *
+ * WLP 0.99 [6.7]
+ *
+ * Only the fields that will be used are detailed in this structure, rest
+ * are not detailed or marked as "notused".
+ */
+struct wlp_ie {
+	struct uwb_ie_hdr hdr;
+	__le16 capabilities;
+	__le16 cycle_param;
+	__le16 acw_anchor_addr;
+	u8 wssid_hash_list[];
+} __attribute__((packed));
+
+static inline int wlp_ie_hash_length(struct wlp_ie *ie)
+{
+	return (le16_to_cpu(ie->capabilities) >> 12) & 0xf;
+}
+
+static inline void wlp_ie_set_hash_length(struct wlp_ie *ie, int hash_length)
+{
+	u16 caps = le16_to_cpu(ie->capabilities);
+	caps = (caps & ~(0xf << 12)) | (hash_length << 12);
+	ie->capabilities = cpu_to_le16(caps);
+}
+
+/**
+ * WLP nonce
+ * WLP Draft 0.99 [6.6.1 Table 6]
+ *
+ * A 128-bit random number often used (E-SNonce1, E-SNonce2, Enrollee
+ * Nonce, Registrar Nonce, R-SNonce1, R-SNonce2). It is passed to HW so
+ * it is packed.
+ */
+struct wlp_nonce {
+	u8 data[16];
+} __attribute__((packed));
+
+/**
+ * WLP UUID
+ * WLP Draft 0.99 [6.6.1 Table 6]
+ *
+ * Universally Unique Identifier (UUID) encoded as an octet string in the
+ * order the octets are shown in string representation in RFC4122. A UUID
+ * is often used (UUID-E, UUID-R, WSSID). It is passed to HW so it is packed.
+ */
+struct wlp_uuid {
+	u8 data[16];
+} __attribute__((packed));
+
+
+/**
+ * Primary and secondary device type attributes
+ * WLP Draft 0.99 [6.6.1.8]
+ */
+struct wlp_dev_type {
+	enum wlp_dev_category_id category:16;
+	u8 OUI[3];
+	u8 OUIsubdiv;
+	__le16 subID;
+} __attribute__((packed));
+
+/**
+ * WLP frame header
+ * WLP Draft 0.99 [6.2]
+ */
+struct wlp_frame_hdr {
+	__le16 mux_hdr;			/* WLP_PROTOCOL_ID */
+	enum wlp_frame_type type:8;
+} __attribute__((packed));
+
+/**
+ * WLP attribute field header
+ * WLP Draft 0.99 [6.6.1]
+ *
+ * Header of each attribute found in an association frame
+ */
+struct wlp_attr_hdr {
+	__le16 type;
+	__le16 length;
+} __attribute__((packed));
+
+/**
+ * Device information commonly used together
+ *
+ * Each of these device information elements has a specified range in which it
+ * should fit (WLP 0.99 [Table 6]). This range provided in the spec does not
+ * include the termination null '\0' character (when used in the
+ * association protocol the attribute fields are accompanied
+ * with a "length" field so the full range from the spec can be used for
+ * the value). We thus allocate an extra byte to be able to store a string
+ * of max length with a terminating '\0'.
+ */
+struct wlp_device_info {
+	char name[33];
+	char model_name[33];
+	char manufacturer[65];
+	char model_nr[33];
+	char serial[33];
+	struct wlp_dev_type prim_dev_type;
+};
+
+/**
+ * Macros for the WLP attributes
+ *
+ * There are quite a few attributes (total is 43). The attribute layout can be
+ * in one of three categories: one value, an array, an enum forced to 8 bits.
+ * These macros help with their definitions.
+ */
+#define wlp_attr(type, name)						\
+struct wlp_attr_##name {						\
+	struct wlp_attr_hdr hdr;					\
+	type name;							\
+} __attribute__((packed));
+
+#define wlp_attr_array(type, name)					\
+struct wlp_attr_##name {						\
+	struct wlp_attr_hdr hdr;					\
+	type name[];							\
+} __attribute__((packed));
+
+/**
+ * WLP association attribute fields
+ * WLP Draft 0.99 [6.6.1 Table 6]
+ *
+ * Attributes appear in same order as the Table in the spec
+ * FIXME Does not define all attributes yet
+ */
+
+/* Device name: Friendly name of sending device */
+wlp_attr_array(u8, dev_name)
+
+/* Enrollee Nonce: Random number generated by enrollee for an enrollment
+ * session */
+wlp_attr(struct wlp_nonce, enonce)
+
+/* Manufacturer name: Name of manufacturer of the sending device */
+wlp_attr_array(u8, manufacturer)
+
+/* WLP Message Type */
+wlp_attr(u8, msg_type)
+
+/* WLP Model name: Model name of sending device */
+wlp_attr_array(u8, model_name)
+
+/* WLP Model number: Model number of sending device */
+wlp_attr_array(u8, model_nr)
+
+/* Registrar Nonce: Random number generated by registrar for an enrollment
+ * session */
+wlp_attr(struct wlp_nonce, rnonce)
+
+/* Serial number of device */
+wlp_attr_array(u8, serial)
+
+/* UUID of enrollee */
+wlp_attr(struct wlp_uuid, uuid_e)
+
+/* UUID of registrar */
+wlp_attr(struct wlp_uuid, uuid_r)
+
+/* WLP Primary device type */
+wlp_attr(struct wlp_dev_type, prim_dev_type)
+
+/* WLP Secondary device type */
+wlp_attr(struct wlp_dev_type, sec_dev_type)
+
+/* WLP protocol version */
+wlp_attr(u8, version)
+
+/* WLP service set identifier */
+wlp_attr(struct wlp_uuid, wssid)
+
+/* WLP WSS name */
+wlp_attr_array(u8, wss_name)
+
+/* WLP WSS Secure Status */
+wlp_attr(u8, wss_sec_status)
+
+/* WSS Broadcast Address */
+wlp_attr(struct uwb_mac_addr, wss_bcast)
+
+/* WLP Accepting Enrollment */
+wlp_attr(u8, accept_enrl)
+
+/**
+ * WSS information attributes
+ * WLP Draft 0.99 [6.6.3 Table 15]
+ */
+struct wlp_wss_info {
+	struct wlp_attr_wssid wssid;
+	struct wlp_attr_wss_name name;
+	struct wlp_attr_accept_enrl accept;
+	struct wlp_attr_wss_sec_status sec_stat;
+	struct wlp_attr_wss_bcast bcast;
+} __attribute__((packed));
+
+/* WLP WSS Information */
+wlp_attr_array(struct wlp_wss_info, wss_info)
+
+/* WLP WSS Selection method */
+wlp_attr(u8, wss_sel_mthd)
+
+/* WLP WSS tag */
+wlp_attr(u8, wss_tag)
+
+/* WSS Virtual Address */
+wlp_attr(struct uwb_mac_addr, wss_virt)
+
+/* WLP association error */
+wlp_attr(u8, wlp_assc_err)
+
+/**
+ * WLP standard and abbreviated frames
+ *
+ * WLP Draft 0.99 [6.3] and [6.4]
+ *
+ * The difference between the WLP standard frame and the WLP
+ * abbreviated frame is that the standard frame includes the src
+ * and dest addresses from the Ethernet header, the abbreviated frame does
+ * not.
+ * The src/dest (as well as the type/length and client data) are already
+ * defined as part of the Ethernet header, we do not do this here.
+ * From this perspective the standard and abbreviated frames appear the
+ * same - they will be treated differently though.
+ *
+ * The size of this header is also captured in WLP_DATA_HLEN to enable
+ * interfaces to prepare their headroom.
+ */
+struct wlp_frame_std_abbrv_hdr {
+	struct wlp_frame_hdr hdr;
+	u8 tag;
+} __attribute__((packed));
+
+/**
+ * WLP association frames
+ *
+ * WLP Draft 0.99 [6.6]
+ */
+struct wlp_frame_assoc {
+	struct wlp_frame_hdr hdr;
+	enum wlp_assoc_type type:8;
+	struct wlp_attr_version version;
+	struct wlp_attr_msg_type msg_type;
+	u8 attr[];
+} __attribute__((packed));
+
+/* Ethernet to dev address mapping */
+struct wlp_eda {
+	spinlock_t lock;
+	struct list_head cache;	/* Eth<->Dev Addr cache */
+};
+
+/**
+ * WSS information temporary storage
+ *
+ * This information is only stored temporarily during discovery. It should
+ * not be stored unless the device is enrolled in the advertised WSS. This
+ * is done mainly because we follow the letter of the spec in this regard.
+ * See WLP 0.99 [7.2.3].
+ * When the device does become enrolled in a WSS the WSS information will
+ * be stored as part of the more comprehensive struct wlp_wss.
+ */
+struct wlp_wss_tmp_info {
+	char name[WLP_WSS_NAME_SIZE];
+	u8 accept_enroll;
+	u8 sec_status;
+	struct uwb_mac_addr bcast;
+};
+
+struct wlp_wssid_e {
+	struct list_head node;
+	struct wlp_uuid wssid;
+	struct wlp_wss_tmp_info *info;
+};
+
+/**
+ * A cache entry of WLP neighborhood
+ *
+ * @node: head of list is wlp->neighbors
+ * @wssid: list of wssids of this neighbor, element is wlp_wssid_e
+ * @info:  temporary storage for information learned during discovery. This
+ *         storage is used together with the wssid_e temporary storage
+ *         during discovery.
+ */
+struct wlp_neighbor_e {
+	struct list_head node;
+	struct wlp_uuid uuid;
+	struct uwb_dev *uwb_dev;
+	struct list_head wssid; /* Elements are wlp_wssid_e */
+	struct wlp_device_info *info;
+};
+
+struct wlp;
+/**
+ * Information for an association session in progress.
+ *
+ * @exp_message: The type of the expected message. Both this message and a
+ *               F0 message (which can be sent in response to any
+ *               association frame) will be accepted as a valid message for
+ *               this session.
+ * @cb:          The function that will be called upon receipt of this
+ *               message.
+ * @cb_priv:     Private data of callback
+ * @data:        Data used in association process (always a sk_buff?)
+ * @neighbor:    Address of neighbor with which association session is in
+ *               progress.
+ */
+struct wlp_session {
+	enum wlp_assoc_type exp_message;
+	void (*cb)(struct wlp *);
+	void *cb_priv;
+	void *data;
+	struct uwb_dev_addr neighbor_addr;
+};
+
+/**
+ * WLP Service Set
+ *
+ * @mutex: used to protect entire WSS structure.
+ *
+ * @name: The WSS name is set to 65 bytes, 1 byte larger than the maximum
+ *        allowed by the WLP spec. This is to have a null terminated string
+ *        for display to the user. A maximum of 64 bytes will still be used
+ *        when placing the WSS name field in association frames.
+ *
+ * @accept_enroll: Accepting enrollment: Set to one if registrar is
+ *                 accepting enrollment in WSS, or zero otherwise.
+ *
+ * Global and local information for each WSS in which we are enrolled.
+ * WLP 0.99 Section 7.2.1 and Section 7.2.2
+ */
+struct wlp_wss {
+	struct mutex mutex;
+	struct kobject kobj;
+	/* Global properties. */
+	struct wlp_uuid wssid;
+	u8 hash;
+	char name[WLP_WSS_NAME_SIZE];
+	struct uwb_mac_addr bcast;
+	u8 secure_status:1;
+	u8 master_key[16];
+	/* Local properties. */
+	u8 tag;
+	struct uwb_mac_addr virtual_addr;
+	/* Extra */
+	u8 accept_enroll:1;
+	enum wlp_wss_state state;
+};
+
+/**
+ * WLP main structure
+ * @mutex: protect changes to WLP structure. We only allow changes to the
+ *         uuid, so currently this mutex only protects this field.
+ */
+struct wlp {
+	struct mutex mutex;
+	struct uwb_rc *rc;		/* UWB radio controller */
+	struct uwb_pal pal;
+	struct wlp_eda eda;
+	struct wlp_uuid uuid;
+	struct wlp_session *session;
+	struct wlp_wss wss;
+	struct mutex nbmutex; /* Neighbor mutex protects neighbors list */
+	struct list_head neighbors; /* Elements are wlp_neighbor_e */
+	struct uwb_notifs_handler uwb_notifs_handler;
+	struct wlp_device_info *dev_info;
+	void (*fill_device_info)(struct wlp *wlp, struct wlp_device_info *info);
+	int (*xmit_frame)(struct wlp *, struct sk_buff *,
+			  struct uwb_dev_addr *);
+	void (*stop_queue)(struct wlp *);
+	void (*start_queue)(struct wlp *);
+};
+
+/* sysfs */
+
+
+struct wlp_wss_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct wlp_wss *wss, char *buf);
+	ssize_t (*store)(struct wlp_wss *wss, const char *buf, size_t count);
+};
+
+#define WSS_ATTR(_name, _mode, _show, _store) \
+static struct wlp_wss_attribute wss_attr_##_name = __ATTR(_name, _mode,	\
+							  _show, _store)
+
+extern int wlp_setup(struct wlp *, struct uwb_rc *);
+extern void wlp_remove(struct wlp *);
+extern ssize_t wlp_neighborhood_show(struct wlp *, char *);
+extern int wlp_wss_setup(struct net_device *, struct wlp_wss *);
+extern void wlp_wss_remove(struct wlp_wss *);
+extern ssize_t wlp_wss_activate_show(struct wlp_wss *, char *);
+extern ssize_t wlp_wss_activate_store(struct wlp_wss *, const char *, size_t);
+extern ssize_t wlp_eda_show(struct wlp *, char *);
+extern ssize_t wlp_eda_store(struct wlp *, const char *, size_t);
+extern ssize_t wlp_uuid_show(struct wlp *, char *);
+extern ssize_t wlp_uuid_store(struct wlp *, const char *, size_t);
+extern ssize_t wlp_dev_name_show(struct wlp *, char *);
+extern ssize_t wlp_dev_name_store(struct wlp *, const char *, size_t);
+extern ssize_t wlp_dev_manufacturer_show(struct wlp *, char *);
+extern ssize_t wlp_dev_manufacturer_store(struct wlp *, const char *, size_t);
+extern ssize_t wlp_dev_model_name_show(struct wlp *, char *);
+extern ssize_t wlp_dev_model_name_store(struct wlp *, const char *, size_t);
+extern ssize_t wlp_dev_model_nr_show(struct wlp *, char *);
+extern ssize_t wlp_dev_model_nr_store(struct wlp *, const char *, size_t);
+extern ssize_t wlp_dev_serial_show(struct wlp *, char *);
+extern ssize_t wlp_dev_serial_store(struct wlp *, const char *, size_t);
+extern ssize_t wlp_dev_prim_category_show(struct wlp *, char *);
+extern ssize_t wlp_dev_prim_category_store(struct wlp *, const char *,
+					   size_t);
+extern ssize_t wlp_dev_prim_OUI_show(struct wlp *, char *);
+extern ssize_t wlp_dev_prim_OUI_store(struct wlp *, const char *, size_t);
+extern ssize_t wlp_dev_prim_OUI_sub_show(struct wlp *, char *);
+extern ssize_t wlp_dev_prim_OUI_sub_store(struct wlp *, const char *,
+					  size_t);
+extern ssize_t wlp_dev_prim_subcat_show(struct wlp *, char *);
+extern ssize_t wlp_dev_prim_subcat_store(struct wlp *, const char *,
+					 size_t);
+extern int wlp_receive_frame(struct device *, struct wlp *, struct sk_buff *,
+			     struct uwb_dev_addr *);
+extern int wlp_prepare_tx_frame(struct device *, struct wlp *,
+			       struct sk_buff *, struct uwb_dev_addr *);
+void wlp_reset_all(struct wlp *wlp);
+
+/**
+ * Initialize WSS
+ */
+static inline
+void wlp_wss_init(struct wlp_wss *wss)
+{
+	mutex_init(&wss->mutex);
+}
+
+static inline
+void wlp_init(struct wlp *wlp)
+{
+	INIT_LIST_HEAD(&wlp->neighbors);
+	mutex_init(&wlp->mutex);
+	mutex_init(&wlp->nbmutex);
+	wlp_wss_init(&wlp->wss);
+}
+
+
+#endif /* #ifndef __LINUX__WLP_H_ */
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index 5c158c4..89a5a123 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -149,11 +149,11 @@
 
 extern struct workqueue_struct *
 __create_workqueue_key(const char *name, int singlethread,
-		       int freezeable, struct lock_class_key *key,
+		       int freezeable, int rt, struct lock_class_key *key,
 		       const char *lock_name);
 
 #ifdef CONFIG_LOCKDEP
-#define __create_workqueue(name, singlethread, freezeable)	\
+#define __create_workqueue(name, singlethread, freezeable, rt)	\
 ({								\
 	static struct lock_class_key __key;			\
 	const char *__lock_name;				\
@@ -164,17 +164,19 @@
 		__lock_name = #name;				\
 								\
 	__create_workqueue_key((name), (singlethread),		\
-			       (freezeable), &__key,		\
+			       (freezeable), (rt), &__key,	\
 			       __lock_name);			\
 })
 #else
-#define __create_workqueue(name, singlethread, freezeable)	\
-	__create_workqueue_key((name), (singlethread), (freezeable), NULL, NULL)
+#define __create_workqueue(name, singlethread, freezeable, rt)	\
+	__create_workqueue_key((name), (singlethread), (freezeable), (rt), \
+			       NULL, NULL)
 #endif
 
-#define create_workqueue(name) __create_workqueue((name), 0, 0)
-#define create_freezeable_workqueue(name) __create_workqueue((name), 1, 1)
-#define create_singlethread_workqueue(name) __create_workqueue((name), 1, 0)
+#define create_workqueue(name) __create_workqueue((name), 0, 0, 0)
+#define create_rt_workqueue(name) __create_workqueue((name), 0, 0, 1)
+#define create_freezeable_workqueue(name) __create_workqueue((name), 1, 1, 0)
+#define create_singlethread_workqueue(name) __create_workqueue((name), 1, 0, 0)
 
 extern void destroy_workqueue(struct workqueue_struct *wq);
 
diff --git a/include/math-emu/op-common.h b/include/math-emu/op-common.h
index cc1ec39..f456534 100644
--- a/include/math-emu/op-common.h
+++ b/include/math-emu/op-common.h
@@ -139,18 +139,27 @@
 	if (X##_e <= _FP_WFRACBITS_##fs)			\
 	  {							\
 	    _FP_FRAC_SRS_##wc(X, X##_e, _FP_WFRACBITS_##fs);	\
-	    _FP_ROUND(wc, X);					\
 	    if (_FP_FRAC_HIGH_##fs(X)				\
 		& (_FP_OVERFLOW_##fs >> 1))			\
 	      {							\
 	        X##_e = 1;					\
 	        _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);	\
-	        FP_SET_EXCEPTION(FP_EX_INEXACT);		\
 	      }							\
 	    else						\
 	      {							\
-		X##_e = 0;					\
-		_FP_FRAC_SRL_##wc(X, _FP_WORKBITS);		\
+		_FP_ROUND(wc, X);				\
+		if (_FP_FRAC_HIGH_##fs(X)			\
+		   & (_FP_OVERFLOW_##fs >> 1))			\
+		  {						\
+		    X##_e = 1;					\
+		    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);	\
+		    FP_SET_EXCEPTION(FP_EX_INEXACT);		\
+		  }						\
+		else						\
+		  {						\
+		    X##_e = 0;					\
+		    _FP_FRAC_SRL_##wc(X, _FP_WORKBITS);		\
+		  }						\
 	      }							\
 	    if ((FP_CUR_EXCEPTIONS & FP_EX_INEXACT) ||		\
 		(FP_TRAPPING_EXCEPTIONS & FP_EX_UNDERFLOW))	\
@@ -494,6 +503,8 @@
     R##_c = FP_CLS_NAN;					\
     _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);		\
     FP_SET_EXCEPTION(FP_EX_INVALID | FP_EX_INVALID_IDI);\
+    break;						\
+							\
   case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO):	\
     R##_s = _FP_NANSIGN_##fs;				\
     R##_c = FP_CLS_NAN;					\
diff --git a/include/media/v4l2-int-device.h b/include/media/v4l2-int-device.h
index c8b80e0..9c2df41 100644
--- a/include/media/v4l2-int-device.h
+++ b/include/media/v4l2-int-device.h
@@ -84,6 +84,8 @@
 	void *priv;
 };
 
+void v4l2_int_device_try_attach_all(void);
+
 int v4l2_int_device_register(struct v4l2_int_device *d);
 void v4l2_int_device_unregister(struct v4l2_int_device *d);
 
@@ -96,6 +98,12 @@
  *
  */
 
+enum v4l2_power {
+	V4L2_POWER_OFF = 0,
+	V4L2_POWER_ON,
+	V4L2_POWER_STANDBY,
+};
+
 /* Slave interface type. */
 enum v4l2_if_type {
 	/*
@@ -170,6 +178,9 @@
 	vidioc_int_queryctrl_num,
 	vidioc_int_g_ctrl_num,
 	vidioc_int_s_ctrl_num,
+	vidioc_int_cropcap_num,
+	vidioc_int_g_crop_num,
+	vidioc_int_s_crop_num,
 	vidioc_int_g_parm_num,
 	vidioc_int_s_parm_num,
 
@@ -182,12 +193,19 @@
 	vidioc_int_dev_init_num = 1000,
 	/* Delinitialise the device at slave detach. */
 	vidioc_int_dev_exit_num,
-	/* Set device power state: 0 is off, non-zero is on. */
+	/* Set device power state. */
 	vidioc_int_s_power_num,
+	/*
+	* Get slave private data, e.g. platform-specific slave
+	* configuration used by the master.
+	*/
+	vidioc_int_g_priv_num,
 	/* Get slave interface parameters. */
 	vidioc_int_g_ifparm_num,
 	/* Does the slave need to be reset after VIDIOC_DQBUF? */
 	vidioc_int_g_needs_reset_num,
+	vidioc_int_enum_framesizes_num,
+	vidioc_int_enum_frameintervals_num,
 
 	/*
 	 *
@@ -261,14 +279,20 @@
 V4L2_INT_WRAPPER_1(queryctrl, struct v4l2_queryctrl, *);
 V4L2_INT_WRAPPER_1(g_ctrl, struct v4l2_control, *);
 V4L2_INT_WRAPPER_1(s_ctrl, struct v4l2_control, *);
+V4L2_INT_WRAPPER_1(cropcap, struct v4l2_cropcap, *);
+V4L2_INT_WRAPPER_1(g_crop, struct v4l2_crop, *);
+V4L2_INT_WRAPPER_1(s_crop, struct v4l2_crop, *);
 V4L2_INT_WRAPPER_1(g_parm, struct v4l2_streamparm, *);
 V4L2_INT_WRAPPER_1(s_parm, struct v4l2_streamparm, *);
 
 V4L2_INT_WRAPPER_0(dev_init);
 V4L2_INT_WRAPPER_0(dev_exit);
-V4L2_INT_WRAPPER_1(s_power, int, );
+V4L2_INT_WRAPPER_1(s_power, enum v4l2_power, );
+V4L2_INT_WRAPPER_1(g_priv, void, *);
 V4L2_INT_WRAPPER_1(g_ifparm, struct v4l2_ifparm, *);
 V4L2_INT_WRAPPER_1(g_needs_reset, void, *);
+V4L2_INT_WRAPPER_1(enum_framesizes, struct v4l2_frmsizeenum, *);
+V4L2_INT_WRAPPER_1(enum_frameintervals, struct v4l2_frmivalenum, *);
 
 V4L2_INT_WRAPPER_0(reset);
 V4L2_INT_WRAPPER_0(init);
diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h
index 0bef03a..e6ba25b 100644
--- a/include/media/v4l2-ioctl.h
+++ b/include/media/v4l2-ioctl.h
@@ -271,26 +271,38 @@
 extern const char *v4l2_type_names[];
 
 /*  Compatibility layer interface  --  v4l1-compat module */
-typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file,
+typedef int (*v4l2_kioctl)(struct file *file,
 			   unsigned int cmd, void *arg);
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
-int v4l_compat_translate_ioctl(struct inode *inode, struct file *file,
+int v4l_compat_translate_ioctl(struct file *file,
 			       int cmd, void *arg, v4l2_kioctl driver_ioctl);
 #else
-#define v4l_compat_translate_ioctl(inode, file, cmd, arg, ioctl) (-EINVAL)
+#define v4l_compat_translate_ioctl(file, cmd, arg, ioctl) (-EINVAL)
 #endif
 
 /* 32 Bits compatibility layer for 64 bits processors */
 extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd,
 				unsigned long arg);
 
-extern int video_ioctl2(struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg);
-
 /* Include support for obsoleted stuff */
 extern int video_usercopy(struct inode *inode, struct file *file,
 			  unsigned int cmd, unsigned long arg,
 			  int (*func)(struct inode *inode, struct file *file,
 				      unsigned int cmd, void *arg));
 
+/* Standard handlers for V4L ioctl's */
+
+/* This prototype is used on fops.unlocked_ioctl */
+extern int __video_ioctl2(struct file *file,
+			unsigned int cmd, unsigned long arg);
+
+/* This prototype is used on fops.ioctl
+ * Since fops.ioctl enables Kernel Big Lock, it is preferred
+ * to use __video_ioctl2 instead.
+ * It should be noticed that there's no lock code inside
+ * video_ioctl2().
+ */
+extern int video_ioctl2(struct inode *inode, struct file *file,
+			unsigned int cmd, unsigned long arg);
+
 #endif /* _V4L2_IOCTL_H */
diff --git a/include/media/videobuf-dvb.h b/include/media/videobuf-dvb.h
index 80471c2..6ba4f12 100644
--- a/include/media/videobuf-dvb.h
+++ b/include/media/videobuf-dvb.h
@@ -47,6 +47,7 @@
 void videobuf_dvb_unregister_bus(struct videobuf_dvb_frontends *f);
 
 struct videobuf_dvb_frontend * videobuf_dvb_alloc_frontend(struct videobuf_dvb_frontends *f, int id);
+void videobuf_dvb_dealloc_frontends(struct videobuf_dvb_frontends *f);
 
 struct videobuf_dvb_frontend * videobuf_dvb_get_frontend(struct videobuf_dvb_frontends *f, int id);
 int videobuf_dvb_find_frontend(struct videobuf_dvb_frontends *f, struct dvb_frontend *p);
diff --git a/include/net/9p/9p.h b/include/net/9p/9p.h
index d2c60c7..b77c147 100644
--- a/include/net/9p/9p.h
+++ b/include/net/9p/9p.h
@@ -56,9 +56,9 @@
 	P9_DEBUG_PKT =		(1<<10),
 };
 
+#ifdef CONFIG_NET_9P_DEBUG
 extern unsigned int p9_debug_level;
 
-#ifdef CONFIG_NET_9P_DEBUG
 #define P9_DPRINTK(level, format, arg...) \
 do {  \
 	if ((p9_debug_level & level) == level) {\
diff --git a/include/net/9p/client.h b/include/net/9p/client.h
index 1f17f3d..4012e07 100644
--- a/include/net/9p/client.h
+++ b/include/net/9p/client.h
@@ -182,6 +182,7 @@
 	struct list_head dlist;	/* list of all fids attached to a dentry */
 };
 
+int p9_client_version(struct p9_client *);
 struct p9_client *p9_client_create(const char *dev_name, char *options);
 void p9_client_destroy(struct p9_client *clnt);
 void p9_client_disconnect(struct p9_client *clnt);
@@ -206,6 +207,7 @@
 struct p9_req_t *p9_tag_lookup(struct p9_client *, u16);
 void p9_client_cb(struct p9_client *c, struct p9_req_t *req);
 
+int p9_parse_header(struct p9_fcall *, int32_t *, int8_t *, int16_t *, int);
 int p9stat_read(char *, int, struct p9_wstat *, int);
 void p9stat_free(struct p9_wstat *);
 
diff --git a/include/net/phonet/phonet.h b/include/net/phonet/phonet.h
index d4e7250..c6a24518 100644
--- a/include/net/phonet/phonet.h
+++ b/include/net/phonet/phonet.h
@@ -27,7 +27,7 @@
  * The lower layers may not require more space, ever. Make sure it's
  * enough.
  */
-#define MAX_PHONET_HEADER	8
+#define MAX_PHONET_HEADER	(8 + MAX_HEADER)
 
 /*
  * Every Phonet* socket has this structure first in its
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
index 029a54a..c1dd893 100644
--- a/include/net/sctp/sm.h
+++ b/include/net/sctp/sm.h
@@ -125,6 +125,7 @@
 sctp_state_fn_t sctp_sf_backbeat_8_3;
 sctp_state_fn_t sctp_sf_do_9_2_final;
 sctp_state_fn_t sctp_sf_do_9_2_shutdown;
+sctp_state_fn_t sctp_sf_do_9_2_shut_ctsn;
 sctp_state_fn_t sctp_sf_do_ecn_cwr;
 sctp_state_fn_t sctp_sf_do_ecne;
 sctp_state_fn_t sctp_sf_ootb;
diff --git a/include/scsi/scsi_ioctl.h b/include/scsi/scsi_ioctl.h
index edb9525..b900684 100644
--- a/include/scsi/scsi_ioctl.h
+++ b/include/scsi/scsi_ioctl.h
@@ -42,7 +42,7 @@
 
 extern int scsi_ioctl(struct scsi_device *, int, void __user *);
 extern int scsi_nonblockable_ioctl(struct scsi_device *sdev, int cmd,
-				   void __user *arg, struct file *filp);
+				   void __user *arg, int ndelay);
 
 #endif /* __KERNEL__ */
 #endif /* _SCSI_IOCTL_H */
diff --git a/init/Kconfig b/init/Kconfig
index 113c74c..44e9208 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -739,7 +739,8 @@
 
 config PCI_QUIRKS
 	default y
-	bool "Enable PCI quirk workarounds" if EMBEDDED && PCI
+	bool "Enable PCI quirk workarounds" if EMBEDDED
+	depends on PCI
 	help
 	  This enables workarounds for various PCI chipset
           bugs/quirks. Disable this only if your target machine is
diff --git a/init/main.c b/init/main.c
index 3e17a3b..7e117a2 100644
--- a/init/main.c
+++ b/init/main.c
@@ -52,6 +52,7 @@
 #include <linux/key.h>
 #include <linux/unwind.h>
 #include <linux/buffer_head.h>
+#include <linux/page_cgroup.h>
 #include <linux/debug_locks.h>
 #include <linux/debugobjects.h>
 #include <linux/lockdep.h>
@@ -647,6 +648,7 @@
 	vmalloc_init();
 	vfs_caches_init_early();
 	cpuset_init_early();
+	page_cgroup_init();
 	mem_init();
 	enable_debug_pagealloc();
 	cpu_hotplug_init();
@@ -670,7 +672,6 @@
 	fork_init(num_physpages);
 	proc_caches_init();
 	buffer_init();
-	unnamed_dev_init();
 	key_init();
 	security_init();
 	vfs_caches_init(num_physpages);
@@ -697,13 +698,7 @@
 }
 
 static int initcall_debug;
-
-static int __init initcall_debug_setup(char *str)
-{
-	initcall_debug = 1;
-	return 1;
-}
-__setup("initcall_debug", initcall_debug_setup);
+core_param(initcall_debug, initcall_debug, bool, 0644);
 
 int do_one_initcall(initcall_t fn)
 {
@@ -773,7 +768,6 @@
 static void __init do_basic_setup(void)
 {
 	rcu_init_sched(); /* needed by module_init stage. */
-	/* drivers will send hotplug events */
 	init_workqueues();
 	usermodehelper_init();
 	driver_init();
diff --git a/ipc/shm.c b/ipc/shm.c
index 0add3fa..867e5d6 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -817,7 +817,7 @@
 	struct ipc_namespace *ns;
 	struct shm_file_data *sfd;
 	struct path path;
-	mode_t f_mode;
+	fmode_t f_mode;
 
 	err = -EINVAL;
 	if (shmid < 0)
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index f7921a2..8ba0e0d 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -532,7 +532,7 @@
 	list_add(&cursor, &tree_list);
 	while (cursor.next != &tree_list) {
 		struct audit_tree *tree;
-		struct nameidata nd;
+		struct path path;
 		struct vfsmount *root_mnt;
 		struct node *node;
 		struct list_head list;
@@ -544,12 +544,12 @@
 		list_add(&cursor, &tree->list);
 		mutex_unlock(&audit_filter_mutex);
 
-		err = path_lookup(tree->pathname, 0, &nd);
+		err = kern_path(tree->pathname, 0, &path);
 		if (err)
 			goto skip_it;
 
-		root_mnt = collect_mounts(nd.path.mnt, nd.path.dentry);
-		path_put(&nd.path);
+		root_mnt = collect_mounts(path.mnt, path.dentry);
+		path_put(&path);
 		if (!root_mnt)
 			goto skip_it;
 
@@ -580,19 +580,19 @@
 }
 
 static int is_under(struct vfsmount *mnt, struct dentry *dentry,
-		    struct nameidata *nd)
+		    struct path *path)
 {
-	if (mnt != nd->path.mnt) {
+	if (mnt != path->mnt) {
 		for (;;) {
 			if (mnt->mnt_parent == mnt)
 				return 0;
-			if (mnt->mnt_parent == nd->path.mnt)
+			if (mnt->mnt_parent == path->mnt)
 					break;
 			mnt = mnt->mnt_parent;
 		}
 		dentry = mnt->mnt_mountpoint;
 	}
-	return is_subdir(dentry, nd->path.dentry);
+	return is_subdir(dentry, path->dentry);
 }
 
 int audit_make_tree(struct audit_krule *rule, char *pathname, u32 op)
@@ -618,7 +618,7 @@
 int audit_add_tree_rule(struct audit_krule *rule)
 {
 	struct audit_tree *seed = rule->tree, *tree;
-	struct nameidata nd;
+	struct path path;
 	struct vfsmount *mnt, *p;
 	struct list_head list;
 	int err;
@@ -637,11 +637,11 @@
 	/* do not set rule->tree yet */
 	mutex_unlock(&audit_filter_mutex);
 
-	err = path_lookup(tree->pathname, 0, &nd);
+	err = kern_path(tree->pathname, 0, &path);
 	if (err)
 		goto Err;
-	mnt = collect_mounts(nd.path.mnt, nd.path.dentry);
-	path_put(&nd.path);
+	mnt = collect_mounts(path.mnt, path.dentry);
+	path_put(&path);
 	if (!mnt) {
 		err = -ENOMEM;
 		goto Err;
@@ -690,29 +690,29 @@
 {
 	struct list_head cursor, barrier;
 	int failed = 0;
-	struct nameidata nd;
+	struct path path;
 	struct vfsmount *tagged;
 	struct list_head list;
 	struct vfsmount *mnt;
 	struct dentry *dentry;
 	int err;
 
-	err = path_lookup(new, 0, &nd);
+	err = kern_path(new, 0, &path);
 	if (err)
 		return err;
-	tagged = collect_mounts(nd.path.mnt, nd.path.dentry);
-	path_put(&nd.path);
+	tagged = collect_mounts(path.mnt, path.dentry);
+	path_put(&path);
 	if (!tagged)
 		return -ENOMEM;
 
-	err = path_lookup(old, 0, &nd);
+	err = kern_path(old, 0, &path);
 	if (err) {
 		drop_collected_mounts(tagged);
 		return err;
 	}
-	mnt = mntget(nd.path.mnt);
-	dentry = dget(nd.path.dentry);
-	path_put(&nd.path);
+	mnt = mntget(path.mnt);
+	dentry = dget(path.dentry);
+	path_put(&path);
 
 	if (dentry == tagged->mnt_root && dentry == mnt->mnt_root)
 		follow_up(&mnt, &dentry);
@@ -733,7 +733,7 @@
 		list_add(&cursor, &tree->list);
 		mutex_unlock(&audit_filter_mutex);
 
-		err = path_lookup(tree->pathname, 0, &nd);
+		err = kern_path(tree->pathname, 0, &path);
 		if (err) {
 			put_tree(tree);
 			mutex_lock(&audit_filter_mutex);
@@ -741,15 +741,15 @@
 		}
 
 		spin_lock(&vfsmount_lock);
-		if (!is_under(mnt, dentry, &nd)) {
+		if (!is_under(mnt, dentry, &path)) {
 			spin_unlock(&vfsmount_lock);
-			path_put(&nd.path);
+			path_put(&path);
 			put_tree(tree);
 			mutex_lock(&audit_filter_mutex);
 			continue;
 		}
 		spin_unlock(&vfsmount_lock);
-		path_put(&nd.path);
+		path_put(&path);
 
 		list_for_each_entry(p, &list, mnt_list) {
 			failed = tag_chunk(p->mnt_root->d_inode, tree);
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 046c160..35eebd5 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -2104,7 +2104,7 @@
 	down_read(&cgrp->pids_mutex);
 	if (pid) {
 		int end = cgrp->pids_length;
-		int i;
+
 		while (index < end) {
 			int mid = (index + end) / 2;
 			if (cgrp->tasks_pids[mid] == pid) {
diff --git a/kernel/exec_domain.c b/kernel/exec_domain.c
index 0d407e8..0511716 100644
--- a/kernel/exec_domain.c
+++ b/kernel/exec_domain.c
@@ -12,7 +12,9 @@
 #include <linux/kmod.h>
 #include <linux/module.h>
 #include <linux/personality.h>
+#include <linux/proc_fs.h>
 #include <linux/sched.h>
+#include <linux/seq_file.h>
 #include <linux/syscalls.h>
 #include <linux/sysctl.h>
 #include <linux/types.h>
@@ -173,21 +175,40 @@
 	return 0;
 }
 
-int
-get_exec_domain_list(char *page)
+#ifdef CONFIG_PROC_FS
+static int execdomains_proc_show(struct seq_file *m, void *v)
 {
 	struct exec_domain	*ep;
-	int			len = 0;
 
 	read_lock(&exec_domains_lock);
-	for (ep = exec_domains; ep && len < PAGE_SIZE - 80; ep = ep->next)
-		len += sprintf(page + len, "%d-%d\t%-16s\t[%s]\n",
+	for (ep = exec_domains; ep; ep = ep->next)
+		seq_printf(m, "%d-%d\t%-16s\t[%s]\n",
 			       ep->pers_low, ep->pers_high, ep->name,
 			       module_name(ep->module));
 	read_unlock(&exec_domains_lock);
-	return (len);
+	return 0;
 }
 
+static int execdomains_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, execdomains_proc_show, NULL);
+}
+
+static const struct file_operations execdomains_proc_fops = {
+	.open		= execdomains_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_execdomains_init(void)
+{
+	proc_create("execdomains", 0, NULL, &execdomains_proc_fops);
+	return 0;
+}
+module_init(proc_execdomains_init);
+#endif
+
 asmlinkage long
 sys_personality(u_long personality)
 {
diff --git a/kernel/fork.c b/kernel/fork.c
index 4d09355..f608356 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1018,6 +1018,8 @@
 	p->prev_utime = cputime_zero;
 	p->prev_stime = cputime_zero;
 
+	p->default_timer_slack_ns = current->timer_slack_ns;
+
 #ifdef CONFIG_DETECT_SOFTLOCKUP
 	p->last_switch_count = 0;
 	p->last_switch_timestamp = 0;
diff --git a/kernel/futex.c b/kernel/futex.c
index 7d1136e..8af1002 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -1296,13 +1296,16 @@
 		if (!abs_time)
 			schedule();
 		else {
+			unsigned long slack;
+			slack = current->timer_slack_ns;
+			if (rt_task(current))
+				slack = 0;
 			hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC,
 						HRTIMER_MODE_ABS);
 			hrtimer_init_sleeper(&t, current);
-			t.timer.expires = *abs_time;
+			hrtimer_set_expires_range_ns(&t.timer, *abs_time, slack);
 
-			hrtimer_start(&t.timer, t.timer.expires,
-						HRTIMER_MODE_ABS);
+			hrtimer_start_expires(&t.timer, HRTIMER_MODE_ABS);
 			if (!hrtimer_active(&t.timer))
 				t.task = NULL;
 
@@ -1404,7 +1407,7 @@
 		hrtimer_init_on_stack(&to->timer, CLOCK_REALTIME,
 				      HRTIMER_MODE_ABS);
 		hrtimer_init_sleeper(to, current);
-		to->timer.expires = *time;
+		hrtimer_set_expires(&to->timer, *time);
 	}
 
 	q.pi_state = NULL;
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 95978f4..2b465df 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -517,7 +517,7 @@
 		if (!base->first)
 			continue;
 		timer = rb_entry(base->first, struct hrtimer, node);
-		expires = ktime_sub(timer->expires, base->offset);
+		expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
 		if (expires.tv64 < cpu_base->expires_next.tv64)
 			cpu_base->expires_next = expires;
 	}
@@ -539,10 +539,10 @@
 			     struct hrtimer_clock_base *base)
 {
 	ktime_t *expires_next = &__get_cpu_var(hrtimer_bases).expires_next;
-	ktime_t expires = ktime_sub(timer->expires, base->offset);
+	ktime_t expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
 	int res;
 
-	WARN_ON_ONCE(timer->expires.tv64 < 0);
+	WARN_ON_ONCE(hrtimer_get_expires_tv64(timer) < 0);
 
 	/*
 	 * When the callback is running, we do not reprogram the clock event
@@ -795,7 +795,7 @@
 	u64 orun = 1;
 	ktime_t delta;
 
-	delta = ktime_sub(now, timer->expires);
+	delta = ktime_sub(now, hrtimer_get_expires(timer));
 
 	if (delta.tv64 < 0)
 		return 0;
@@ -807,8 +807,8 @@
 		s64 incr = ktime_to_ns(interval);
 
 		orun = ktime_divns(delta, incr);
-		timer->expires = ktime_add_ns(timer->expires, incr * orun);
-		if (timer->expires.tv64 > now.tv64)
+		hrtimer_add_expires_ns(timer, incr * orun);
+		if (hrtimer_get_expires_tv64(timer) > now.tv64)
 			return orun;
 		/*
 		 * This (and the ktime_add() below) is the
@@ -816,7 +816,7 @@
 		 */
 		orun++;
 	}
-	timer->expires = ktime_add_safe(timer->expires, interval);
+	hrtimer_add_expires(timer, interval);
 
 	return orun;
 }
@@ -848,7 +848,8 @@
 		 * We dont care about collisions. Nodes with
 		 * the same expiry time stay together.
 		 */
-		if (timer->expires.tv64 < entry->expires.tv64) {
+		if (hrtimer_get_expires_tv64(timer) <
+				hrtimer_get_expires_tv64(entry)) {
 			link = &(*link)->rb_left;
 		} else {
 			link = &(*link)->rb_right;
@@ -945,9 +946,10 @@
 }
 
 /**
- * hrtimer_start - (re)start an relative timer on the current CPU
+ * hrtimer_start_range_ns - (re)start an hrtimer on the current CPU
  * @timer:	the timer to be added
  * @tim:	expiry time
+ * @delta_ns:	"slack" range for the timer
  * @mode:	expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
  *
  * Returns:
@@ -955,7 +957,8 @@
  *  1 when the timer was active
  */
 int
-hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode)
+hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, unsigned long delta_ns,
+			const enum hrtimer_mode mode)
 {
 	struct hrtimer_clock_base *base, *new_base;
 	unsigned long flags;
@@ -983,7 +986,7 @@
 #endif
 	}
 
-	timer->expires = tim;
+	hrtimer_set_expires_range_ns(timer, tim, delta_ns);
 
 	timer_stats_hrtimer_set_start_info(timer);
 
@@ -1016,8 +1019,26 @@
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(hrtimer_start_range_ns);
+
+/**
+ * hrtimer_start - (re)start an hrtimer on the current CPU
+ * @timer:	the timer to be added
+ * @tim:	expiry time
+ * @mode:	expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
+ *
+ * Returns:
+ *  0 on success
+ *  1 when the timer was active
+ */
+int
+hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode)
+{
+	return hrtimer_start_range_ns(timer, tim, 0, mode);
+}
 EXPORT_SYMBOL_GPL(hrtimer_start);
 
+
 /**
  * hrtimer_try_to_cancel - try to deactivate a timer
  * @timer:	hrtimer to stop
@@ -1077,7 +1098,7 @@
 	ktime_t rem;
 
 	base = lock_hrtimer_base(timer, &flags);
-	rem = ktime_sub(timer->expires, base->get_time());
+	rem = hrtimer_expires_remaining(timer);
 	unlock_hrtimer_base(timer, &flags);
 
 	return rem;
@@ -1109,7 +1130,7 @@
 				continue;
 
 			timer = rb_entry(base->first, struct hrtimer, node);
-			delta.tv64 = timer->expires.tv64;
+			delta.tv64 = hrtimer_get_expires_tv64(timer);
 			delta = ktime_sub(delta, base->get_time());
 			if (delta.tv64 < mindelta.tv64)
 				mindelta.tv64 = delta.tv64;
@@ -1310,10 +1331,23 @@
 
 			timer = rb_entry(node, struct hrtimer, node);
 
-			if (basenow.tv64 < timer->expires.tv64) {
+			/*
+			 * The immediate goal for using the softexpires is
+			 * minimizing wakeups, not running timers at the
+			 * earliest interrupt after their soft expiration.
+			 * This allows us to avoid using a Priority Search
+			 * Tree, which can answer a stabbing querry for
+			 * overlapping intervals and instead use the simple
+			 * BST we already have.
+			 * We don't add extra wakeups by delaying timers that
+			 * are right-of a not yet expired timer, because that
+			 * timer will have to trigger a wakeup anyway.
+			 */
+
+			if (basenow.tv64 < hrtimer_get_softexpires_tv64(timer)) {
 				ktime_t expires;
 
-				expires = ktime_sub(timer->expires,
+				expires = ktime_sub(hrtimer_get_expires(timer),
 						    base->offset);
 				if (expires.tv64 < expires_next.tv64)
 					expires_next = expires;
@@ -1349,6 +1383,30 @@
 		raise_softirq(HRTIMER_SOFTIRQ);
 }
 
+/**
+ * hrtimer_peek_ahead_timers -- run soft-expired timers now
+ *
+ * hrtimer_peek_ahead_timers will peek at the timer queue of
+ * the current cpu and check if there are any timers for which
+ * the soft expires time has passed. If any such timers exist,
+ * they are run immediately and then removed from the timer queue.
+ *
+ */
+void hrtimer_peek_ahead_timers(void)
+{
+	struct tick_device *td;
+	unsigned long flags;
+
+	if (!hrtimer_hres_active())
+		return;
+
+	local_irq_save(flags);
+	td = &__get_cpu_var(tick_cpu_device);
+	if (td && td->evtdev)
+		hrtimer_interrupt(td->evtdev);
+	local_irq_restore(flags);
+}
+
 static void run_hrtimer_softirq(struct softirq_action *h)
 {
 	run_hrtimer_pending(&__get_cpu_var(hrtimer_bases));
@@ -1414,7 +1472,8 @@
 			struct hrtimer *timer;
 
 			timer = rb_entry(node, struct hrtimer, node);
-			if (base->softirq_time.tv64 <= timer->expires.tv64)
+			if (base->softirq_time.tv64 <=
+					hrtimer_get_expires_tv64(timer))
 				break;
 
 			if (timer->cb_mode == HRTIMER_CB_SOFTIRQ) {
@@ -1462,7 +1521,7 @@
 
 	do {
 		set_current_state(TASK_INTERRUPTIBLE);
-		hrtimer_start(&t->timer, t->timer.expires, mode);
+		hrtimer_start_expires(&t->timer, mode);
 		if (!hrtimer_active(&t->timer))
 			t->task = NULL;
 
@@ -1484,7 +1543,7 @@
 	struct timespec rmt;
 	ktime_t rem;
 
-	rem = ktime_sub(timer->expires, timer->base->get_time());
+	rem = hrtimer_expires_remaining(timer);
 	if (rem.tv64 <= 0)
 		return 0;
 	rmt = ktime_to_timespec(rem);
@@ -1503,7 +1562,7 @@
 
 	hrtimer_init_on_stack(&t.timer, restart->nanosleep.index,
 				HRTIMER_MODE_ABS);
-	t.timer.expires.tv64 = restart->nanosleep.expires;
+	hrtimer_set_expires_tv64(&t.timer, restart->nanosleep.expires);
 
 	if (do_nanosleep(&t, HRTIMER_MODE_ABS))
 		goto out;
@@ -1528,9 +1587,14 @@
 	struct restart_block *restart;
 	struct hrtimer_sleeper t;
 	int ret = 0;
+	unsigned long slack;
+
+	slack = current->timer_slack_ns;
+	if (rt_task(current))
+		slack = 0;
 
 	hrtimer_init_on_stack(&t.timer, clockid, mode);
-	t.timer.expires = timespec_to_ktime(*rqtp);
+	hrtimer_set_expires_range_ns(&t.timer, timespec_to_ktime(*rqtp), slack);
 	if (do_nanosleep(&t, mode))
 		goto out;
 
@@ -1550,7 +1614,7 @@
 	restart->fn = hrtimer_nanosleep_restart;
 	restart->nanosleep.index = t.timer.base->index;
 	restart->nanosleep.rmtp = rmtp;
-	restart->nanosleep.expires = t.timer.expires.tv64;
+	restart->nanosleep.expires = hrtimer_get_expires_tv64(&t.timer);
 
 	ret = -ERESTART_RESTARTBLOCK;
 out:
@@ -1752,3 +1816,103 @@
 #endif
 }
 
+/**
+ * schedule_hrtimeout_range - sleep until timeout
+ * @expires:	timeout value (ktime_t)
+ * @delta:	slack in expires timeout (ktime_t)
+ * @mode:	timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
+ *
+ * Make the current task sleep until the given expiry time has
+ * elapsed. The routine will return immediately unless
+ * the current task state has been set (see set_current_state()).
+ *
+ * The @delta argument gives the kernel the freedom to schedule the
+ * actual wakeup to a time that is both power and performance friendly.
+ * The kernel give the normal best effort behavior for "@expires+@delta",
+ * but may decide to fire the timer earlier, but no earlier than @expires.
+ *
+ * You can set the task state as follows -
+ *
+ * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
+ * pass before the routine returns.
+ *
+ * %TASK_INTERRUPTIBLE - the routine may return early if a signal is
+ * delivered to the current task.
+ *
+ * The current task state is guaranteed to be TASK_RUNNING when this
+ * routine returns.
+ *
+ * Returns 0 when the timer has expired otherwise -EINTR
+ */
+int __sched schedule_hrtimeout_range(ktime_t *expires, unsigned long delta,
+			       const enum hrtimer_mode mode)
+{
+	struct hrtimer_sleeper t;
+
+	/*
+	 * Optimize when a zero timeout value is given. It does not
+	 * matter whether this is an absolute or a relative time.
+	 */
+	if (expires && !expires->tv64) {
+		__set_current_state(TASK_RUNNING);
+		return 0;
+	}
+
+	/*
+	 * A NULL parameter means "inifinte"
+	 */
+	if (!expires) {
+		schedule();
+		__set_current_state(TASK_RUNNING);
+		return -EINTR;
+	}
+
+	hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, mode);
+	hrtimer_set_expires_range_ns(&t.timer, *expires, delta);
+
+	hrtimer_init_sleeper(&t, current);
+
+	hrtimer_start_expires(&t.timer, mode);
+	if (!hrtimer_active(&t.timer))
+		t.task = NULL;
+
+	if (likely(t.task))
+		schedule();
+
+	hrtimer_cancel(&t.timer);
+	destroy_hrtimer_on_stack(&t.timer);
+
+	__set_current_state(TASK_RUNNING);
+
+	return !t.task ? 0 : -EINTR;
+}
+EXPORT_SYMBOL_GPL(schedule_hrtimeout_range);
+
+/**
+ * schedule_hrtimeout - sleep until timeout
+ * @expires:	timeout value (ktime_t)
+ * @mode:	timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
+ *
+ * Make the current task sleep until the given expiry time has
+ * elapsed. The routine will return immediately unless
+ * the current task state has been set (see set_current_state()).
+ *
+ * You can set the task state as follows -
+ *
+ * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
+ * pass before the routine returns.
+ *
+ * %TASK_INTERRUPTIBLE - the routine may return early if a signal is
+ * delivered to the current task.
+ *
+ * The current task state is guaranteed to be TASK_RUNNING when this
+ * routine returns.
+ *
+ * Returns 0 when the timer has expired otherwise -EINTR
+ */
+int __sched schedule_hrtimeout(ktime_t *expires,
+			       const enum hrtimer_mode mode)
+{
+	return schedule_hrtimeout_range(expires, 0, mode);
+}
+EXPORT_SYMBOL_GPL(schedule_hrtimeout);
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 4895fde..10b5092 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -76,6 +76,7 @@
 	desc->chip_data = NULL;
 	desc->handle_irq = handle_bad_irq;
 	desc->chip = &no_irq_chip;
+	desc->name = NULL;
 	spin_unlock_irqrestore(&desc->lock, flags);
 }
 
@@ -127,7 +128,7 @@
 		return 0;
 
 	spin_lock_irqsave(&desc->lock, flags);
-	ret = __irq_set_trigger(desc, irq, flags);
+	ret = __irq_set_trigger(desc, irq, type);
 	spin_unlock_irqrestore(&desc->lock, flags);
 	return ret;
 }
diff --git a/kernel/module.c b/kernel/module.c
index 0d8d21e..1f4cc00 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -20,11 +20,13 @@
 #include <linux/moduleloader.h>
 #include <linux/init.h>
 #include <linux/kallsyms.h>
+#include <linux/fs.h>
 #include <linux/sysfs.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/elf.h>
+#include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/syscalls.h>
 #include <linux/fcntl.h>
@@ -42,6 +44,7 @@
 #include <linux/string.h>
 #include <linux/mutex.h>
 #include <linux/unwind.h>
+#include <linux/rculist.h>
 #include <asm/uaccess.h>
 #include <asm/cacheflush.h>
 #include <linux/license.h>
@@ -63,7 +66,7 @@
 #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
 
 /* List of modules, protected by module_mutex or preempt_disable
- * (add/delete uses stop_machine). */
+ * (delete uses stop_machine/add uses RCU list operations). */
 static DEFINE_MUTEX(module_mutex);
 static LIST_HEAD(modules);
 
@@ -132,6 +135,29 @@
 	return 0;
 }
 
+/* Find a module section, or NULL. */
+static void *section_addr(Elf_Ehdr *hdr, Elf_Shdr *shdrs,
+			  const char *secstrings, const char *name)
+{
+	/* Section 0 has sh_addr 0. */
+	return (void *)shdrs[find_sec(hdr, shdrs, secstrings, name)].sh_addr;
+}
+
+/* Find a module section, or NULL.  Fill in number of "objects" in section. */
+static void *section_objs(Elf_Ehdr *hdr,
+			  Elf_Shdr *sechdrs,
+			  const char *secstrings,
+			  const char *name,
+			  size_t object_size,
+			  unsigned int *num)
+{
+	unsigned int sec = find_sec(hdr, sechdrs, secstrings, name);
+
+	/* Section 0 has sh_addr 0 and sh_size 0. */
+	*num = sechdrs[sec].sh_size / object_size;
+	return (void *)sechdrs[sec].sh_addr;
+}
+
 /* Provided by the linker */
 extern const struct kernel_symbol __start___ksymtab[];
 extern const struct kernel_symbol __stop___ksymtab[];
@@ -218,7 +244,7 @@
 	if (each_symbol_in_section(arr, ARRAY_SIZE(arr), NULL, fn, data))
 		return true;
 
-	list_for_each_entry(mod, &modules, list) {
+	list_for_each_entry_rcu(mod, &modules, list) {
 		struct symsearch arr[] = {
 			{ mod->syms, mod->syms + mod->num_syms, mod->crcs,
 			  NOT_GPL_ONLY, false },
@@ -1394,17 +1420,6 @@
 }
 
 /*
- * link the module with the whole machine is stopped with interrupts off
- * - this defends against kallsyms not taking locks
- */
-static int __link_module(void *_mod)
-{
-	struct module *mod = _mod;
-	list_add(&mod->list, &modules);
-	return 0;
-}
-
-/*
  * unlink the module with the whole machine is stopped with interrupts off
  * - this defends against kallsyms not taking locks
  */
@@ -1789,32 +1804,20 @@
 }
 #endif /* CONFIG_KALLSYMS */
 
+static void dynamic_printk_setup(struct mod_debug *debug, unsigned int num)
+{
 #ifdef CONFIG_DYNAMIC_PRINTK_DEBUG
-static void dynamic_printk_setup(Elf_Shdr *sechdrs, unsigned int verboseindex)
-{
-	struct mod_debug *debug_info;
-	unsigned long pos, end;
-	unsigned int num_verbose;
+	unsigned int i;
 
-	pos = sechdrs[verboseindex].sh_addr;
-	num_verbose = sechdrs[verboseindex].sh_size /
-				sizeof(struct mod_debug);
-	end = pos + (num_verbose * sizeof(struct mod_debug));
-
-	for (; pos < end; pos += sizeof(struct mod_debug)) {
-		debug_info = (struct mod_debug *)pos;
-		register_dynamic_debug_module(debug_info->modname,
-			debug_info->type, debug_info->logical_modname,
-			debug_info->flag_names, debug_info->hash,
-			debug_info->hash2);
+	for (i = 0; i < num; i++) {
+		register_dynamic_debug_module(debug[i].modname,
+					      debug[i].type,
+					      debug[i].logical_modname,
+					      debug[i].flag_names,
+					      debug[i].hash, debug[i].hash2);
 	}
-}
-#else
-static inline void dynamic_printk_setup(Elf_Shdr *sechdrs,
-					unsigned int verboseindex)
-{
-}
 #endif /* CONFIG_DYNAMIC_PRINTK_DEBUG */
+}
 
 static void *module_alloc_update_bounds(unsigned long size)
 {
@@ -1843,37 +1846,14 @@
 	unsigned int i;
 	unsigned int symindex = 0;
 	unsigned int strindex = 0;
-	unsigned int setupindex;
-	unsigned int exindex;
-	unsigned int exportindex;
-	unsigned int modindex;
-	unsigned int obsparmindex;
-	unsigned int infoindex;
-	unsigned int gplindex;
-	unsigned int crcindex;
-	unsigned int gplcrcindex;
-	unsigned int versindex;
-	unsigned int pcpuindex;
-	unsigned int gplfutureindex;
-	unsigned int gplfuturecrcindex;
+	unsigned int modindex, versindex, infoindex, pcpuindex;
 	unsigned int unwindex = 0;
-#ifdef CONFIG_UNUSED_SYMBOLS
-	unsigned int unusedindex;
-	unsigned int unusedcrcindex;
-	unsigned int unusedgplindex;
-	unsigned int unusedgplcrcindex;
-#endif
-	unsigned int markersindex;
-	unsigned int markersstringsindex;
-	unsigned int verboseindex;
-	unsigned int tracepointsindex;
-	unsigned int tracepointsstringsindex;
-	unsigned int mcountindex;
+	unsigned int num_kp, num_mcount;
+	struct kernel_param *kp;
 	struct module *mod;
 	long err = 0;
 	void *percpu = NULL, *ptr = NULL; /* Stops spurious gcc warning */
-	void *mseg;
-	struct exception_table_entry *extable;
+	unsigned long *mseg;
 	mm_segment_t old_fs;
 
 	DEBUGP("load_module: umod=%p, len=%lu, uargs=%p\n",
@@ -1937,6 +1917,7 @@
 		err = -ENOEXEC;
 		goto free_hdr;
 	}
+	/* This is temporary: point mod into copy of data. */
 	mod = (void *)sechdrs[modindex].sh_addr;
 
 	if (symindex == 0) {
@@ -1946,22 +1927,6 @@
 		goto free_hdr;
 	}
 
-	/* Optional sections */
-	exportindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab");
-	gplindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab_gpl");
-	gplfutureindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab_gpl_future");
-	crcindex = find_sec(hdr, sechdrs, secstrings, "__kcrctab");
-	gplcrcindex = find_sec(hdr, sechdrs, secstrings, "__kcrctab_gpl");
-	gplfuturecrcindex = find_sec(hdr, sechdrs, secstrings, "__kcrctab_gpl_future");
-#ifdef CONFIG_UNUSED_SYMBOLS
-	unusedindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab_unused");
-	unusedgplindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab_unused_gpl");
-	unusedcrcindex = find_sec(hdr, sechdrs, secstrings, "__kcrctab_unused");
-	unusedgplcrcindex = find_sec(hdr, sechdrs, secstrings, "__kcrctab_unused_gpl");
-#endif
-	setupindex = find_sec(hdr, sechdrs, secstrings, "__param");
-	exindex = find_sec(hdr, sechdrs, secstrings, "__ex_table");
-	obsparmindex = find_sec(hdr, sechdrs, secstrings, "__obsparm");
 	versindex = find_sec(hdr, sechdrs, secstrings, "__versions");
 	infoindex = find_sec(hdr, sechdrs, secstrings, ".modinfo");
 	pcpuindex = find_pcpusec(hdr, sechdrs, secstrings);
@@ -2117,42 +2082,57 @@
 	if (err < 0)
 		goto cleanup;
 
-	/* Set up EXPORTed & EXPORT_GPLed symbols (section 0 is 0 length) */
-	mod->num_syms = sechdrs[exportindex].sh_size / sizeof(*mod->syms);
-	mod->syms = (void *)sechdrs[exportindex].sh_addr;
-	if (crcindex)
-		mod->crcs = (void *)sechdrs[crcindex].sh_addr;
-	mod->num_gpl_syms = sechdrs[gplindex].sh_size / sizeof(*mod->gpl_syms);
-	mod->gpl_syms = (void *)sechdrs[gplindex].sh_addr;
-	if (gplcrcindex)
-		mod->gpl_crcs = (void *)sechdrs[gplcrcindex].sh_addr;
-	mod->num_gpl_future_syms = sechdrs[gplfutureindex].sh_size /
-					sizeof(*mod->gpl_future_syms);
-	mod->gpl_future_syms = (void *)sechdrs[gplfutureindex].sh_addr;
-	if (gplfuturecrcindex)
-		mod->gpl_future_crcs = (void *)sechdrs[gplfuturecrcindex].sh_addr;
+	/* Now we've got everything in the final locations, we can
+	 * find optional sections. */
+	kp = section_objs(hdr, sechdrs, secstrings, "__param", sizeof(*kp),
+			  &num_kp);
+	mod->syms = section_objs(hdr, sechdrs, secstrings, "__ksymtab",
+				 sizeof(*mod->syms), &mod->num_syms);
+	mod->crcs = section_addr(hdr, sechdrs, secstrings, "__kcrctab");
+	mod->gpl_syms = section_objs(hdr, sechdrs, secstrings, "__ksymtab_gpl",
+				     sizeof(*mod->gpl_syms),
+				     &mod->num_gpl_syms);
+	mod->gpl_crcs = section_addr(hdr, sechdrs, secstrings, "__kcrctab_gpl");
+	mod->gpl_future_syms = section_objs(hdr, sechdrs, secstrings,
+					    "__ksymtab_gpl_future",
+					    sizeof(*mod->gpl_future_syms),
+					    &mod->num_gpl_future_syms);
+	mod->gpl_future_crcs = section_addr(hdr, sechdrs, secstrings,
+					    "__kcrctab_gpl_future");
 
 #ifdef CONFIG_UNUSED_SYMBOLS
-	mod->num_unused_syms = sechdrs[unusedindex].sh_size /
-					sizeof(*mod->unused_syms);
-	mod->num_unused_gpl_syms = sechdrs[unusedgplindex].sh_size /
-					sizeof(*mod->unused_gpl_syms);
-	mod->unused_syms = (void *)sechdrs[unusedindex].sh_addr;
-	if (unusedcrcindex)
-		mod->unused_crcs = (void *)sechdrs[unusedcrcindex].sh_addr;
-	mod->unused_gpl_syms = (void *)sechdrs[unusedgplindex].sh_addr;
-	if (unusedgplcrcindex)
-		mod->unused_gpl_crcs
-			= (void *)sechdrs[unusedgplcrcindex].sh_addr;
+	mod->unused_syms = section_objs(hdr, sechdrs, secstrings,
+					"__ksymtab_unused",
+					sizeof(*mod->unused_syms),
+					&mod->num_unused_syms);
+	mod->unused_crcs = section_addr(hdr, sechdrs, secstrings,
+					"__kcrctab_unused");
+	mod->unused_gpl_syms = section_objs(hdr, sechdrs, secstrings,
+					    "__ksymtab_unused_gpl",
+					    sizeof(*mod->unused_gpl_syms),
+					    &mod->num_unused_gpl_syms);
+	mod->unused_gpl_crcs = section_addr(hdr, sechdrs, secstrings,
+					    "__kcrctab_unused_gpl");
+#endif
+
+#ifdef CONFIG_MARKERS
+	mod->markers = section_objs(hdr, sechdrs, secstrings, "__markers",
+				    sizeof(*mod->markers), &mod->num_markers);
+#endif
+#ifdef CONFIG_TRACEPOINTS
+	mod->tracepoints = section_objs(hdr, sechdrs, secstrings,
+					"__tracepoints",
+					sizeof(*mod->tracepoints),
+					&mod->num_tracepoints);
 #endif
 
 #ifdef CONFIG_MODVERSIONS
-	if ((mod->num_syms && !crcindex)
-	    || (mod->num_gpl_syms && !gplcrcindex)
-	    || (mod->num_gpl_future_syms && !gplfuturecrcindex)
+	if ((mod->num_syms && !mod->crcs)
+	    || (mod->num_gpl_syms && !mod->gpl_crcs)
+	    || (mod->num_gpl_future_syms && !mod->gpl_future_crcs)
 #ifdef CONFIG_UNUSED_SYMBOLS
-	    || (mod->num_unused_syms && !unusedcrcindex)
-	    || (mod->num_unused_gpl_syms && !unusedgplcrcindex)
+	    || (mod->num_unused_syms && !mod->unused_crcs)
+	    || (mod->num_unused_gpl_syms && !mod->unused_gpl_crcs)
 #endif
 		) {
 		printk(KERN_WARNING "%s: No versions for exported symbols.\n", mod->name);
@@ -2161,16 +2141,6 @@
 			goto cleanup;
 	}
 #endif
-	markersindex = find_sec(hdr, sechdrs, secstrings, "__markers");
- 	markersstringsindex = find_sec(hdr, sechdrs, secstrings,
-					"__markers_strings");
-	verboseindex = find_sec(hdr, sechdrs, secstrings, "__verbose");
-	tracepointsindex = find_sec(hdr, sechdrs, secstrings, "__tracepoints");
-	tracepointsstringsindex = find_sec(hdr, sechdrs, secstrings,
-					"__tracepoints_strings");
-
-	mcountindex = find_sec(hdr, sechdrs, secstrings,
-			       "__mcount_loc");
 
 	/* Now do relocations. */
 	for (i = 1; i < hdr->e_shnum; i++) {
@@ -2193,28 +2163,16 @@
 		if (err < 0)
 			goto cleanup;
 	}
-#ifdef CONFIG_MARKERS
-	mod->markers = (void *)sechdrs[markersindex].sh_addr;
-	mod->num_markers =
-		sechdrs[markersindex].sh_size / sizeof(*mod->markers);
-#endif
-#ifdef CONFIG_TRACEPOINTS
-	mod->tracepoints = (void *)sechdrs[tracepointsindex].sh_addr;
-	mod->num_tracepoints =
-		sechdrs[tracepointsindex].sh_size / sizeof(*mod->tracepoints);
-#endif
-
 
         /* Find duplicate symbols */
 	err = verify_export_symbols(mod);
-
 	if (err < 0)
 		goto cleanup;
 
   	/* Set up and sort exception table */
-	mod->num_exentries = sechdrs[exindex].sh_size / sizeof(*mod->extable);
-	mod->extable = extable = (void *)sechdrs[exindex].sh_addr;
-	sort_extable(extable, extable + mod->num_exentries);
+	mod->extable = section_objs(hdr, sechdrs, secstrings, "__ex_table",
+				    sizeof(*mod->extable), &mod->num_exentries);
+	sort_extable(mod->extable, mod->extable + mod->num_exentries);
 
 	/* Finally, copy percpu area over. */
 	percpu_modcopy(mod->percpu, (void *)sechdrs[pcpuindex].sh_addr,
@@ -2223,11 +2181,17 @@
 	add_kallsyms(mod, sechdrs, symindex, strindex, secstrings);
 
 	if (!mod->taints) {
+		struct mod_debug *debug;
+		unsigned int num_debug;
+
 #ifdef CONFIG_MARKERS
 		marker_update_probe_range(mod->markers,
 			mod->markers + mod->num_markers);
 #endif
-	dynamic_printk_setup(sechdrs, verboseindex);
+		debug = section_objs(hdr, sechdrs, secstrings, "__verbose",
+				     sizeof(*debug), &num_debug);
+		dynamic_printk_setup(debug, num_debug);
+
 #ifdef CONFIG_TRACEPOINTS
 		tracepoint_update_probe_range(mod->tracepoints,
 			mod->tracepoints + mod->num_tracepoints);
@@ -2235,8 +2199,9 @@
 	}
 
 	/* sechdrs[0].sh_size is always zero */
-	mseg = (void *)sechdrs[mcountindex].sh_addr;
-	ftrace_init_module(mseg, mseg + sechdrs[mcountindex].sh_size);
+	mseg = section_objs(hdr, sechdrs, secstrings, "__mcount_loc",
+			    sizeof(*mseg), &num_mcount);
+	ftrace_init_module(mseg, mseg + num_mcount);
 
 	err = module_finalize(hdr, sechdrs, mod);
 	if (err < 0)
@@ -2261,30 +2226,24 @@
 	set_fs(old_fs);
 
 	mod->args = args;
-	if (obsparmindex)
+	if (section_addr(hdr, sechdrs, secstrings, "__obsparm"))
 		printk(KERN_WARNING "%s: Ignoring obsolete parameters\n",
 		       mod->name);
 
 	/* Now sew it into the lists so we can get lockdep and oops
-         * info during argument parsing.  Noone should access us, since
-         * strong_try_module_get() will fail. */
-	stop_machine(__link_module, mod, NULL);
+	 * info during argument parsing.  Noone should access us, since
+	 * strong_try_module_get() will fail.
+	 * lockdep/oops can run asynchronous, so use the RCU list insertion
+	 * function to insert in a way safe to concurrent readers.
+	 * The mutex protects against concurrent writers.
+	 */
+	list_add_rcu(&mod->list, &modules);
 
-	/* Size of section 0 is 0, so this works well if no params */
-	err = parse_args(mod->name, mod->args,
-			 (struct kernel_param *)
-			 sechdrs[setupindex].sh_addr,
-			 sechdrs[setupindex].sh_size
-			 / sizeof(struct kernel_param),
-			 NULL);
+	err = parse_args(mod->name, mod->args, kp, num_kp, NULL);
 	if (err < 0)
 		goto unlink;
 
-	err = mod_sysfs_setup(mod,
-			      (struct kernel_param *)
-			      sechdrs[setupindex].sh_addr,
-			      sechdrs[setupindex].sh_size
-			      / sizeof(struct kernel_param));
+	err = mod_sysfs_setup(mod, kp, num_kp);
 	if (err < 0)
 		goto unlink;
 	add_sect_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
@@ -2473,7 +2432,7 @@
 	const char *ret = NULL;
 
 	preempt_disable();
-	list_for_each_entry(mod, &modules, list) {
+	list_for_each_entry_rcu(mod, &modules, list) {
 		if (within(addr, mod->module_init, mod->init_size)
 		    || within(addr, mod->module_core, mod->core_size)) {
 			if (modname)
@@ -2496,7 +2455,7 @@
 	struct module *mod;
 
 	preempt_disable();
-	list_for_each_entry(mod, &modules, list) {
+	list_for_each_entry_rcu(mod, &modules, list) {
 		if (within(addr, mod->module_init, mod->init_size) ||
 		    within(addr, mod->module_core, mod->core_size)) {
 			const char *sym;
@@ -2520,7 +2479,7 @@
 	struct module *mod;
 
 	preempt_disable();
-	list_for_each_entry(mod, &modules, list) {
+	list_for_each_entry_rcu(mod, &modules, list) {
 		if (within(addr, mod->module_init, mod->init_size) ||
 		    within(addr, mod->module_core, mod->core_size)) {
 			const char *sym;
@@ -2547,7 +2506,7 @@
 	struct module *mod;
 
 	preempt_disable();
-	list_for_each_entry(mod, &modules, list) {
+	list_for_each_entry_rcu(mod, &modules, list) {
 		if (symnum < mod->num_symtab) {
 			*value = mod->symtab[symnum].st_value;
 			*type = mod->symtab[symnum].st_info;
@@ -2590,7 +2549,7 @@
 			ret = mod_find_symname(mod, colon+1);
 		*colon = ':';
 	} else {
-		list_for_each_entry(mod, &modules, list)
+		list_for_each_entry_rcu(mod, &modules, list)
 			if ((ret = mod_find_symname(mod, name)) != 0)
 				break;
 	}
@@ -2599,23 +2558,6 @@
 }
 #endif /* CONFIG_KALLSYMS */
 
-/* Called by the /proc file system to return a list of modules. */
-static void *m_start(struct seq_file *m, loff_t *pos)
-{
-	mutex_lock(&module_mutex);
-	return seq_list_start(&modules, *pos);
-}
-
-static void *m_next(struct seq_file *m, void *p, loff_t *pos)
-{
-	return seq_list_next(p, &modules, pos);
-}
-
-static void m_stop(struct seq_file *m, void *p)
-{
-	mutex_unlock(&module_mutex);
-}
-
 static char *module_flags(struct module *mod, char *buf)
 {
 	int bx = 0;
@@ -2649,6 +2591,24 @@
 	return buf;
 }
 
+#ifdef CONFIG_PROC_FS
+/* Called by the /proc file system to return a list of modules. */
+static void *m_start(struct seq_file *m, loff_t *pos)
+{
+	mutex_lock(&module_mutex);
+	return seq_list_start(&modules, *pos);
+}
+
+static void *m_next(struct seq_file *m, void *p, loff_t *pos)
+{
+	return seq_list_next(p, &modules, pos);
+}
+
+static void m_stop(struct seq_file *m, void *p)
+{
+	mutex_unlock(&module_mutex);
+}
+
 static int m_show(struct seq_file *m, void *p)
 {
 	struct module *mod = list_entry(p, struct module, list);
@@ -2679,13 +2639,33 @@
    Where refcount is a number or -, and deps is a comma-separated list
    of depends or -.
 */
-const struct seq_operations modules_op = {
+static const struct seq_operations modules_op = {
 	.start	= m_start,
 	.next	= m_next,
 	.stop	= m_stop,
 	.show	= m_show
 };
 
+static int modules_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &modules_op);
+}
+
+static const struct file_operations proc_modules_operations = {
+	.open		= modules_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int __init proc_modules_init(void)
+{
+	proc_create("modules", 0, NULL, &proc_modules_operations);
+	return 0;
+}
+module_init(proc_modules_init);
+#endif
+
 /* Given an address, look for it in the module exception tables. */
 const struct exception_table_entry *search_module_extables(unsigned long addr)
 {
@@ -2693,7 +2673,7 @@
 	struct module *mod;
 
 	preempt_disable();
-	list_for_each_entry(mod, &modules, list) {
+	list_for_each_entry_rcu(mod, &modules, list) {
 		if (mod->num_exentries == 0)
 			continue;
 
@@ -2719,7 +2699,7 @@
 
 	preempt_disable();
 
-	list_for_each_entry(mod, &modules, list) {
+	list_for_each_entry_rcu(mod, &modules, list) {
 		if (within(addr, mod->module_core, mod->core_size)) {
 			preempt_enable();
 			return 1;
@@ -2740,7 +2720,7 @@
 	if (addr < module_addr_min || addr > module_addr_max)
 		return NULL;
 
-	list_for_each_entry(mod, &modules, list)
+	list_for_each_entry_rcu(mod, &modules, list)
 		if (within(addr, mod->module_init, mod->init_text_size)
 		    || within(addr, mod->module_core, mod->core_text_size))
 			return mod;
@@ -2765,8 +2745,11 @@
 	char buf[8];
 
 	printk("Modules linked in:");
-	list_for_each_entry(mod, &modules, list)
+	/* Most callers should already have preempt disabled, but make sure */
+	preempt_disable();
+	list_for_each_entry_rcu(mod, &modules, list)
 		printk(" %s%s", mod->name, module_flags(mod, buf));
+	preempt_enable();
 	if (last_unloaded_module[0])
 		printk(" [last unloaded: %s]", last_unloaded_module);
 	printk("\n");
diff --git a/kernel/panic.c b/kernel/panic.c
index bda561e..6513aac 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -34,13 +34,6 @@
 
 EXPORT_SYMBOL(panic_notifier_list);
 
-static int __init panic_setup(char *str)
-{
-	panic_timeout = simple_strtoul(str, NULL, 0);
-	return 1;
-}
-__setup("panic=", panic_setup);
-
 static long no_blink(long time)
 {
 	return 0;
@@ -218,13 +211,6 @@
 }
 EXPORT_SYMBOL(add_taint);
 
-static int __init pause_on_oops_setup(char *str)
-{
-	pause_on_oops = simple_strtoul(str, NULL, 0);
-	return 1;
-}
-__setup("pause_on_oops=", pause_on_oops_setup);
-
 static void spin_msec(int msecs)
 {
 	int i;
@@ -384,3 +370,6 @@
 }
 EXPORT_SYMBOL(__stack_chk_fail);
 #endif
+
+core_param(panic, panic_timeout, int, 0644);
+core_param(pause_on_oops, pause_on_oops, int, 0644);
diff --git a/kernel/params.c b/kernel/params.c
index afc46a2..a1e3025 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -373,6 +373,8 @@
 }
 
 /* sysfs output in /sys/modules/XYZ/parameters/ */
+#define to_module_attr(n) container_of(n, struct module_attribute, attr);
+#define to_module_kobject(n) container_of(n, struct module_kobject, kobj);
 
 extern struct kernel_param __start___param[], __stop___param[];
 
@@ -384,6 +386,7 @@
 
 struct module_param_attrs
 {
+	unsigned int num;
 	struct attribute_group grp;
 	struct param_attribute attrs[0];
 };
@@ -434,93 +437,120 @@
 
 #ifdef CONFIG_SYSFS
 /*
- * param_sysfs_setup - setup sysfs support for one module or KBUILD_MODNAME
- * @mk: struct module_kobject (contains parent kobject)
- * @kparam: array of struct kernel_param, the actual parameter definitions
- * @num_params: number of entries in array
- * @name_skip: offset where the parameter name start in kparam[].name. Needed for built-in "modules"
+ * add_sysfs_param - add a parameter to sysfs
+ * @mk: struct module_kobject
+ * @kparam: the actual parameter definition to add to sysfs
+ * @name: name of parameter
  *
- * Create a kobject for a (per-module) group of parameters, and create files
- * in sysfs. A pointer to the param_kobject is returned on success,
- * NULL if there's no parameter to export, or other ERR_PTR(err).
+ * Create a kobject if for a (per-module) parameter if mp NULL, and
+ * create file in sysfs.  Returns an error on out of memory.  Always cleans up
+ * if there's an error.
  */
-static __modinit struct module_param_attrs *
-param_sysfs_setup(struct module_kobject *mk,
-		  struct kernel_param *kparam,
-		  unsigned int num_params,
-		  unsigned int name_skip)
+static __modinit int add_sysfs_param(struct module_kobject *mk,
+				     struct kernel_param *kp,
+				     const char *name)
 {
-	struct module_param_attrs *mp;
-	unsigned int valid_attrs = 0;
-	unsigned int i, size[2];
-	struct param_attribute *pattr;
-	struct attribute **gattr;
-	int err;
+	struct module_param_attrs *new;
+	struct attribute **attrs;
+	int err, num;
 
-	for (i=0; i<num_params; i++) {
-		if (kparam[i].perm)
-			valid_attrs++;
+	/* We don't bother calling this with invisible parameters. */
+	BUG_ON(!kp->perm);
+
+	if (!mk->mp) {
+		num = 0;
+		attrs = NULL;
+	} else {
+		num = mk->mp->num;
+		attrs = mk->mp->grp.attrs;
 	}
 
-	if (!valid_attrs)
-		return NULL;
-
-	size[0] = ALIGN(sizeof(*mp) +
-			valid_attrs * sizeof(mp->attrs[0]),
-			sizeof(mp->grp.attrs[0]));
-	size[1] = (valid_attrs + 1) * sizeof(mp->grp.attrs[0]);
-
-	mp = kzalloc(size[0] + size[1], GFP_KERNEL);
-	if (!mp)
-		return ERR_PTR(-ENOMEM);
-
-	mp->grp.name = "parameters";
-	mp->grp.attrs = (void *)mp + size[0];
-
-	pattr = &mp->attrs[0];
-	gattr = &mp->grp.attrs[0];
-	for (i = 0; i < num_params; i++) {
-		struct kernel_param *kp = &kparam[i];
-		if (kp->perm) {
-			pattr->param = kp;
-			pattr->mattr.show = param_attr_show;
-			pattr->mattr.store = param_attr_store;
-			pattr->mattr.attr.name = (char *)&kp->name[name_skip];
-			pattr->mattr.attr.mode = kp->perm;
-			*(gattr++) = &(pattr++)->mattr.attr;
-		}
+	/* Enlarge. */
+	new = krealloc(mk->mp,
+		       sizeof(*mk->mp) + sizeof(mk->mp->attrs[0]) * (num+1),
+		       GFP_KERNEL);
+	if (!new) {
+		kfree(mk->mp);
+		err = -ENOMEM;
+		goto fail;
 	}
-	*gattr = NULL;
-
-	if ((err = sysfs_create_group(&mk->kobj, &mp->grp))) {
-		kfree(mp);
-		return ERR_PTR(err);
+	attrs = krealloc(attrs, sizeof(new->grp.attrs[0])*(num+2), GFP_KERNEL);
+	if (!attrs) {
+		err = -ENOMEM;
+		goto fail_free_new;
 	}
-	return mp;
+
+	/* Sysfs wants everything zeroed. */
+	memset(new, 0, sizeof(*new));
+	memset(&new->attrs[num], 0, sizeof(new->attrs[num]));
+	memset(&attrs[num], 0, sizeof(attrs[num]));
+	new->grp.name = "parameters";
+	new->grp.attrs = attrs;
+
+	/* Tack new one on the end. */
+	new->attrs[num].param = kp;
+	new->attrs[num].mattr.show = param_attr_show;
+	new->attrs[num].mattr.store = param_attr_store;
+	new->attrs[num].mattr.attr.name = (char *)name;
+	new->attrs[num].mattr.attr.mode = kp->perm;
+	new->num = num+1;
+
+	/* Fix up all the pointers, since krealloc can move us */
+	for (num = 0; num < new->num; num++)
+		new->grp.attrs[num] = &new->attrs[num].mattr.attr;
+	new->grp.attrs[num] = NULL;
+
+	mk->mp = new;
+	return 0;
+
+fail_free_new:
+	kfree(new);
+fail:
+	mk->mp = NULL;
+	return err;
 }
 
 #ifdef CONFIG_MODULES
+static void free_module_param_attrs(struct module_kobject *mk)
+{
+	kfree(mk->mp->grp.attrs);
+	kfree(mk->mp);
+	mk->mp = NULL;
+}
+
 /*
  * module_param_sysfs_setup - setup sysfs support for one module
  * @mod: module
  * @kparam: module parameters (array)
  * @num_params: number of module parameters
  *
- * Adds sysfs entries for module parameters, and creates a link from
- * /sys/module/[mod->name]/parameters to /sys/parameters/[mod->name]/
+ * Adds sysfs entries for module parameters under
+ * /sys/module/[mod->name]/parameters/
  */
 int module_param_sysfs_setup(struct module *mod,
 			     struct kernel_param *kparam,
 			     unsigned int num_params)
 {
-	struct module_param_attrs *mp;
+	int i, err;
+	bool params = false;
 
-	mp = param_sysfs_setup(&mod->mkobj, kparam, num_params, 0);
-	if (IS_ERR(mp))
-		return PTR_ERR(mp);
+	for (i = 0; i < num_params; i++) {
+		if (kparam[i].perm == 0)
+			continue;
+		err = add_sysfs_param(&mod->mkobj, &kparam[i], kparam[i].name);
+		if (err)
+			return err;
+		params = true;
+	}
 
-	mod->param_attrs = mp;
-	return 0;
+	if (!params)
+		return 0;
+
+	/* Create the param group. */
+	err = sysfs_create_group(&mod->mkobj.kobj, &mod->mkobj.mp->grp);
+	if (err)
+		free_module_param_attrs(&mod->mkobj);
+	return err;
 }
 
 /*
@@ -532,43 +562,55 @@
  */
 void module_param_sysfs_remove(struct module *mod)
 {
-	if (mod->param_attrs) {
-		sysfs_remove_group(&mod->mkobj.kobj,
-				   &mod->param_attrs->grp);
+	if (mod->mkobj.mp) {
+		sysfs_remove_group(&mod->mkobj.kobj, &mod->mkobj.mp->grp);
 		/* We are positive that no one is using any param
 		 * attrs at this point.  Deallocate immediately. */
-		kfree(mod->param_attrs);
-		mod->param_attrs = NULL;
+		free_module_param_attrs(&mod->mkobj);
 	}
 }
 #endif
 
-/*
- * kernel_param_sysfs_setup - wrapper for built-in params support
- */
-static void __init kernel_param_sysfs_setup(const char *name,
-					    struct kernel_param *kparam,
-					    unsigned int num_params,
-					    unsigned int name_skip)
+static void __init kernel_add_sysfs_param(const char *name,
+					  struct kernel_param *kparam,
+					  unsigned int name_skip)
 {
 	struct module_kobject *mk;
-	int ret;
+	struct kobject *kobj;
+	int err;
 
-	mk = kzalloc(sizeof(struct module_kobject), GFP_KERNEL);
-	BUG_ON(!mk);
+	kobj = kset_find_obj(module_kset, name);
+	if (kobj) {
+		/* We already have one.  Remove params so we can add more. */
+		mk = to_module_kobject(kobj);
+		/* We need to remove it before adding parameters. */
+		sysfs_remove_group(&mk->kobj, &mk->mp->grp);
+	} else {
+		mk = kzalloc(sizeof(struct module_kobject), GFP_KERNEL);
+		BUG_ON(!mk);
 
-	mk->mod = THIS_MODULE;
-	mk->kobj.kset = module_kset;
-	ret = kobject_init_and_add(&mk->kobj, &module_ktype, NULL, "%s", name);
-	if (ret) {
-		kobject_put(&mk->kobj);
-		printk(KERN_ERR "Module '%s' failed to be added to sysfs, "
-		      "error number %d\n", name, ret);
-		printk(KERN_ERR	"The system will be unstable now.\n");
-		return;
+		mk->mod = THIS_MODULE;
+		mk->kobj.kset = module_kset;
+		err = kobject_init_and_add(&mk->kobj, &module_ktype, NULL,
+					   "%s", name);
+		if (err) {
+			kobject_put(&mk->kobj);
+			printk(KERN_ERR "Module '%s' failed add to sysfs, "
+			       "error number %d\n", name, err);
+			printk(KERN_ERR	"The system will be unstable now.\n");
+			return;
+		}
+		/* So that exit path is even. */
+		kobject_get(&mk->kobj);
 	}
-	param_sysfs_setup(mk, kparam, num_params, name_skip);
+
+	/* These should not fail at boot. */
+	err = add_sysfs_param(mk, kparam, kparam->name + name_skip);
+	BUG_ON(err);
+	err = sysfs_create_group(&mk->kobj, &mk->mp->grp);
+	BUG_ON(err);
 	kobject_uevent(&mk->kobj, KOBJ_ADD);
+	kobject_put(&mk->kobj);
 }
 
 /*
@@ -579,60 +621,36 @@
  * The "module" name (KBUILD_MODNAME) is stored before a dot, the
  * "parameter" name is stored behind a dot in kernel_param->name. So,
  * extract the "module" name for all built-in kernel_param-eters,
- * and for all who have the same, call kernel_param_sysfs_setup.
+ * and for all who have the same, call kernel_add_sysfs_param.
  */
 static void __init param_sysfs_builtin(void)
 {
-	struct kernel_param *kp, *kp_begin = NULL;
-	unsigned int i, name_len, count = 0;
-	char modname[MODULE_NAME_LEN + 1] = "";
+	struct kernel_param *kp;
+	unsigned int name_len;
+	char modname[MODULE_NAME_LEN];
 
-	for (i=0; i < __stop___param - __start___param; i++) {
+	for (kp = __start___param; kp < __stop___param; kp++) {
 		char *dot;
-		size_t max_name_len;
 
-		kp = &__start___param[i];
-		max_name_len =
-			min_t(size_t, MODULE_NAME_LEN, strlen(kp->name));
-
-		dot = memchr(kp->name, '.', max_name_len);
-		if (!dot) {
-			DEBUGP("couldn't find period in first %d characters "
-			       "of %s\n", MODULE_NAME_LEN, kp->name);
+		if (kp->perm == 0)
 			continue;
-		}
-		name_len = dot - kp->name;
 
- 		/* new kbuild_modname? */
-		if (strlen(modname) != name_len
-		    || strncmp(modname, kp->name, name_len) != 0) {
-			/* add a new kobject for previous kernel_params. */
-			if (count)
-				kernel_param_sysfs_setup(modname,
-							 kp_begin,
-							 count,
-							 strlen(modname)+1);
-
-			strncpy(modname, kp->name, name_len);
-			modname[name_len] = '\0';
-			count = 0;
-			kp_begin = kp;
+		dot = strchr(kp->name, '.');
+		if (!dot) {
+			/* This happens for core_param() */
+			strcpy(modname, "kernel");
+			name_len = 0;
+		} else {
+			name_len = dot - kp->name + 1;
+			strlcpy(modname, kp->name, name_len);
 		}
-		count++;
+		kernel_add_sysfs_param(modname, kp, name_len);
 	}
-
-	/* last kernel_params need to be registered as well */
-	if (count)
-		kernel_param_sysfs_setup(modname, kp_begin, count,
-					 strlen(modname)+1);
 }
 
 
 /* module-related sysfs stuff */
 
-#define to_module_attr(n) container_of(n, struct module_attribute, attr);
-#define to_module_kobject(n) container_of(n, struct module_kobject, kobj);
-
 static ssize_t module_attr_show(struct kobject *kobj,
 				struct attribute *attr,
 				char *buf)
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index b931d7c..5e79c66 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -639,7 +639,7 @@
 	    (timr->it_sigev_notify & ~SIGEV_THREAD_ID) == SIGEV_NONE))
 		timr->it_overrun += (unsigned int) hrtimer_forward(timer, now, iv);
 
-	remaining = ktime_sub(timer->expires, now);
+	remaining = ktime_sub(hrtimer_get_expires(timer), now);
 	/* Return 0 only, when the timer is expired and not pending */
 	if (remaining.tv64 <= 0) {
 		/*
@@ -733,7 +733,7 @@
 	hrtimer_init(&timr->it.real.timer, timr->it_clock, mode);
 	timr->it.real.timer.function = posix_timer_fn;
 
-	timer->expires = timespec_to_ktime(new_setting->it_value);
+	hrtimer_set_expires(timer, timespec_to_ktime(new_setting->it_value));
 
 	/* Convert interval */
 	timr->it.real.interval = timespec_to_ktime(new_setting->it_interval);
@@ -742,14 +742,12 @@
 	if (((timr->it_sigev_notify & ~SIGEV_THREAD_ID) == SIGEV_NONE)) {
 		/* Setup correct expiry time for relative timers */
 		if (mode == HRTIMER_MODE_REL) {
-			timer->expires =
-				ktime_add_safe(timer->expires,
-					       timer->base->get_time());
+			hrtimer_add_expires(timer, timer->base->get_time());
 		}
 		return 0;
 	}
 
-	hrtimer_start(timer, timer->expires, mode);
+	hrtimer_start_expires(timer, mode);
 	return 0;
 }
 
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 331f983..c9d7408 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -651,7 +651,7 @@
 	pr_debug("PM: Preparing processes for restore.\n");
 	error = prepare_processes();
 	if (error) {
-		swsusp_close();
+		swsusp_close(FMODE_READ);
 		goto Done;
 	}
 
diff --git a/kernel/power/power.h b/kernel/power/power.h
index acc0c10..46b5ec7 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -153,7 +153,7 @@
 extern void swsusp_free(void);
 extern int swsusp_read(unsigned int *flags_p);
 extern int swsusp_write(unsigned int flags);
-extern void swsusp_close(void);
+extern void swsusp_close(fmode_t);
 
 struct timeval;
 /* kernel/power/swsusp.c */
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index 80ccac8..b7713b5 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -172,13 +172,13 @@
 		return res;
 
 	root_swap = res;
-	res = blkdev_get(resume_bdev, FMODE_WRITE, O_RDWR);
+	res = blkdev_get(resume_bdev, FMODE_WRITE);
 	if (res)
 		return res;
 
 	res = set_blocksize(resume_bdev, PAGE_SIZE);
 	if (res < 0)
-		blkdev_put(resume_bdev);
+		blkdev_put(resume_bdev, FMODE_WRITE);
 
 	return res;
 }
@@ -426,7 +426,7 @@
 
 	release_swap_writer(&handle);
  out:
-	swsusp_close();
+	swsusp_close(FMODE_WRITE);
 	return error;
 }
 
@@ -574,7 +574,7 @@
 		error = load_image(&handle, &snapshot, header->pages - 1);
 	release_swap_reader(&handle);
 
-	blkdev_put(resume_bdev);
+	blkdev_put(resume_bdev, FMODE_READ);
 
 	if (!error)
 		pr_debug("PM: Image successfully loaded\n");
@@ -609,7 +609,7 @@
 			return -EINVAL;
 		}
 		if (error)
-			blkdev_put(resume_bdev);
+			blkdev_put(resume_bdev, FMODE_READ);
 		else
 			pr_debug("PM: Signature found, resuming\n");
 	} else {
@@ -626,14 +626,14 @@
  *	swsusp_close - close swap device.
  */
 
-void swsusp_close(void)
+void swsusp_close(fmode_t mode)
 {
 	if (IS_ERR(resume_bdev)) {
 		pr_debug("PM: Image device not initialised\n");
 		return;
 	}
 
-	blkdev_put(resume_bdev);
+	blkdev_put(resume_bdev, mode); /* move up */
 }
 
 static int swsusp_header_init(void)
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index 467d594..ad63af8 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -119,18 +119,19 @@
 	/* Take cpucontrol mutex to protect against CPU hotplug */
 	mutex_lock(&rcu_barrier_mutex);
 	init_completion(&rcu_barrier_completion);
-	atomic_set(&rcu_barrier_cpu_count, 0);
 	/*
-	 * The queueing of callbacks in all CPUs must be atomic with
-	 * respect to RCU, otherwise one CPU may queue a callback,
-	 * wait for a grace period, decrement barrier count and call
-	 * complete(), while other CPUs have not yet queued anything.
-	 * So, we need to make sure that grace periods cannot complete
-	 * until all the callbacks are queued.
+	 * Initialize rcu_barrier_cpu_count to 1, then invoke
+	 * rcu_barrier_func() on each CPU, so that each CPU also has
+	 * incremented rcu_barrier_cpu_count.  Only then is it safe to
+	 * decrement rcu_barrier_cpu_count -- otherwise the first CPU
+	 * might complete its grace period before all of the other CPUs
+	 * did their increment, causing this function to return too
+	 * early.
 	 */
-	rcu_read_lock();
+	atomic_set(&rcu_barrier_cpu_count, 1);
 	on_each_cpu(rcu_barrier_func, (void *)type, 1);
-	rcu_read_unlock();
+	if (atomic_dec_and_test(&rcu_barrier_cpu_count))
+		complete(&rcu_barrier_completion);
 	wait_for_completion(&rcu_barrier_completion);
 	mutex_unlock(&rcu_barrier_mutex);
 }
diff --git a/kernel/rtmutex.c b/kernel/rtmutex.c
index 6522ae5..69d9cb9 100644
--- a/kernel/rtmutex.c
+++ b/kernel/rtmutex.c
@@ -631,8 +631,7 @@
 
 	/* Setup the timer, when timeout != NULL */
 	if (unlikely(timeout)) {
-		hrtimer_start(&timeout->timer, timeout->timer.expires,
-			      HRTIMER_MODE_ABS);
+		hrtimer_start_expires(&timeout->timer, HRTIMER_MODE_ABS);
 		if (!hrtimer_active(&timeout->timer))
 			timeout->task = NULL;
 	}
diff --git a/kernel/sched.c b/kernel/sched.c
index d906f72..6625c3c 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -55,6 +55,7 @@
 #include <linux/cpuset.h>
 #include <linux/percpu.h>
 #include <linux/kthread.h>
+#include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/sysctl.h>
 #include <linux/syscalls.h>
@@ -227,9 +228,8 @@
 
 		now = hrtimer_cb_get_time(&rt_b->rt_period_timer);
 		hrtimer_forward(&rt_b->rt_period_timer, now, rt_b->rt_period);
-		hrtimer_start(&rt_b->rt_period_timer,
-			      rt_b->rt_period_timer.expires,
-			      HRTIMER_MODE_ABS);
+		hrtimer_start_expires(&rt_b->rt_period_timer,
+				HRTIMER_MODE_ABS);
 	}
 	spin_unlock(&rt_b->rt_runtime_lock);
 }
@@ -819,6 +819,13 @@
 unsigned int sysctl_sched_shares_ratelimit = 250000;
 
 /*
+ * Inject some fuzzyness into changing the per-cpu group shares
+ * this avoids remote rq-locks at the expense of fairness.
+ * default: 4
+ */
+unsigned int sysctl_sched_shares_thresh = 4;
+
+/*
  * period over which we measure -rt task cpu usage in us.
  * default: 1s
  */
@@ -1064,7 +1071,7 @@
 	struct hrtimer *timer = &rq->hrtick_timer;
 	ktime_t time = ktime_add_ns(timer->base->get_time(), delay);
 
-	timer->expires = time;
+	hrtimer_set_expires(timer, time);
 
 	if (rq == this_rq()) {
 		hrtimer_restart(timer);
@@ -1454,8 +1461,8 @@
  * Calculate and set the cpu's group shares.
  */
 static void
-__update_group_shares_cpu(struct task_group *tg, int cpu,
-			  unsigned long sd_shares, unsigned long sd_rq_weight)
+update_group_shares_cpu(struct task_group *tg, int cpu,
+			unsigned long sd_shares, unsigned long sd_rq_weight)
 {
 	int boost = 0;
 	unsigned long shares;
@@ -1486,19 +1493,23 @@
 	 *
 	 */
 	shares = (sd_shares * rq_weight) / (sd_rq_weight + 1);
+	shares = clamp_t(unsigned long, shares, MIN_SHARES, MAX_SHARES);
 
-	/*
-	 * record the actual number of shares, not the boosted amount.
-	 */
-	tg->cfs_rq[cpu]->shares = boost ? 0 : shares;
-	tg->cfs_rq[cpu]->rq_weight = rq_weight;
+	if (abs(shares - tg->se[cpu]->load.weight) >
+			sysctl_sched_shares_thresh) {
+		struct rq *rq = cpu_rq(cpu);
+		unsigned long flags;
 
-	if (shares < MIN_SHARES)
-		shares = MIN_SHARES;
-	else if (shares > MAX_SHARES)
-		shares = MAX_SHARES;
+		spin_lock_irqsave(&rq->lock, flags);
+		/*
+		 * record the actual number of shares, not the boosted amount.
+		 */
+		tg->cfs_rq[cpu]->shares = boost ? 0 : shares;
+		tg->cfs_rq[cpu]->rq_weight = rq_weight;
 
-	__set_se_shares(tg->se[cpu], shares);
+		__set_se_shares(tg->se[cpu], shares);
+		spin_unlock_irqrestore(&rq->lock, flags);
+	}
 }
 
 /*
@@ -1527,14 +1538,8 @@
 	if (!rq_weight)
 		rq_weight = cpus_weight(sd->span) * NICE_0_LOAD;
 
-	for_each_cpu_mask(i, sd->span) {
-		struct rq *rq = cpu_rq(i);
-		unsigned long flags;
-
-		spin_lock_irqsave(&rq->lock, flags);
-		__update_group_shares_cpu(tg, i, shares, rq_weight);
-		spin_unlock_irqrestore(&rq->lock, flags);
-	}
+	for_each_cpu_mask(i, sd->span)
+		update_group_shares_cpu(tg, i, shares, rq_weight);
 
 	return 0;
 }
@@ -4443,12 +4448,8 @@
 	if (sched_feat(HRTICK))
 		hrtick_clear(rq);
 
-	/*
-	 * Do the rq-clock update outside the rq lock:
-	 */
-	local_irq_disable();
+	spin_lock_irq(&rq->lock);
 	update_rq_clock(rq);
-	spin_lock(&rq->lock);
 	clear_tsk_need_resched(prev);
 
 	if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) {
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index f604dae..9573c33 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -73,6 +73,8 @@
 
 const_debug unsigned int sysctl_sched_migration_cost = 500000UL;
 
+static const struct sched_class fair_sched_class;
+
 /**************************************************************
  * CFS operations on generic schedulable entities:
  */
@@ -334,7 +336,7 @@
 #endif
 
 /*
- * delta *= w / rw
+ * delta *= P[w / rw]
  */
 static inline unsigned long
 calc_delta_weight(unsigned long delta, struct sched_entity *se)
@@ -348,15 +350,13 @@
 }
 
 /*
- * delta *= rw / w
+ * delta /= w
  */
 static inline unsigned long
 calc_delta_fair(unsigned long delta, struct sched_entity *se)
 {
-	for_each_sched_entity(se) {
-		delta = calc_delta_mine(delta,
-				cfs_rq_of(se)->load.weight, &se->load);
-	}
+	if (unlikely(se->load.weight != NICE_0_LOAD))
+		delta = calc_delta_mine(delta, NICE_0_LOAD, &se->load);
 
 	return delta;
 }
@@ -386,26 +386,26 @@
  * We calculate the wall-time slice from the period by taking a part
  * proportional to the weight.
  *
- * s = p*w/rw
+ * s = p*P[w/rw]
  */
 static u64 sched_slice(struct cfs_rq *cfs_rq, struct sched_entity *se)
 {
-	return calc_delta_weight(__sched_period(cfs_rq->nr_running), se);
+	unsigned long nr_running = cfs_rq->nr_running;
+
+	if (unlikely(!se->on_rq))
+		nr_running++;
+
+	return calc_delta_weight(__sched_period(nr_running), se);
 }
 
 /*
  * We calculate the vruntime slice of a to be inserted task
  *
- * vs = s*rw/w = p
+ * vs = s/w
  */
-static u64 sched_vslice_add(struct cfs_rq *cfs_rq, struct sched_entity *se)
+static u64 sched_vslice(struct cfs_rq *cfs_rq, struct sched_entity *se)
 {
-	unsigned long nr_running = cfs_rq->nr_running;
-
-	if (!se->on_rq)
-		nr_running++;
-
-	return __sched_period(nr_running);
+	return calc_delta_fair(sched_slice(cfs_rq, se), se);
 }
 
 /*
@@ -628,7 +628,7 @@
 	 * stays open at the end.
 	 */
 	if (initial && sched_feat(START_DEBIT))
-		vruntime += sched_vslice_add(cfs_rq, se);
+		vruntime += sched_vslice(cfs_rq, se);
 
 	if (!initial) {
 		/* sleeps upto a single latency don't count. */
@@ -748,7 +748,7 @@
 	struct rq *rq = rq_of(cfs_rq);
 	u64 pair_slice = rq->clock - cfs_rq->pair_start;
 
-	if (!cfs_rq->next || pair_slice > sched_slice(cfs_rq, cfs_rq->next)) {
+	if (!cfs_rq->next || pair_slice > sysctl_sched_min_granularity) {
 		cfs_rq->pair_start = rq->clock;
 		return se;
 	}
@@ -849,11 +849,31 @@
 		hrtick_start(rq, delta);
 	}
 }
+
+/*
+ * called from enqueue/dequeue and updates the hrtick when the
+ * current task is from our class and nr_running is low enough
+ * to matter.
+ */
+static void hrtick_update(struct rq *rq)
+{
+	struct task_struct *curr = rq->curr;
+
+	if (curr->sched_class != &fair_sched_class)
+		return;
+
+	if (cfs_rq_of(&curr->se)->nr_running < sched_nr_latency)
+		hrtick_start_fair(rq, curr);
+}
 #else /* !CONFIG_SCHED_HRTICK */
 static inline void
 hrtick_start_fair(struct rq *rq, struct task_struct *p)
 {
 }
+
+static inline void hrtick_update(struct rq *rq)
+{
+}
 #endif
 
 /*
@@ -874,7 +894,7 @@
 		wakeup = 1;
 	}
 
-	hrtick_start_fair(rq, rq->curr);
+	hrtick_update(rq);
 }
 
 /*
@@ -896,7 +916,7 @@
 		sleep = 1;
 	}
 
-	hrtick_start_fair(rq, rq->curr);
+	hrtick_update(rq);
 }
 
 /*
@@ -1002,8 +1022,6 @@
 
 #ifdef CONFIG_SMP
 
-static const struct sched_class fair_sched_class;
-
 #ifdef CONFIG_FAIR_GROUP_SCHED
 /*
  * effective_load() calculates the load change as seen from the root_task_group
diff --git a/kernel/sched_features.h b/kernel/sched_features.h
index 7c9e8f4..fda0162 100644
--- a/kernel/sched_features.h
+++ b/kernel/sched_features.h
@@ -5,7 +5,7 @@
 SCHED_FEAT(AFFINE_WAKEUPS, 1)
 SCHED_FEAT(CACHE_HOT_BUDDY, 1)
 SCHED_FEAT(SYNC_WAKEUPS, 1)
-SCHED_FEAT(HRTICK, 1)
+SCHED_FEAT(HRTICK, 0)
 SCHED_FEAT(DOUBLE_TICK, 0)
 SCHED_FEAT(ASYM_GRAN, 1)
 SCHED_FEAT(LB_BIAS, 1)
diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h
index b8c1569..ee71bec 100644
--- a/kernel/sched_stats.h
+++ b/kernel/sched_stats.h
@@ -9,7 +9,7 @@
 static int show_schedstat(struct seq_file *seq, void *v)
 {
 	int cpu;
-	int mask_len = NR_CPUS/32 * 9;
+	int mask_len = DIV_ROUND_UP(NR_CPUS, 32) * 9;
 	char *mask_str = kmalloc(mask_len, GFP_KERNEL);
 
 	if (mask_str == NULL)
@@ -90,13 +90,20 @@
 	return res;
 }
 
-const struct file_operations proc_schedstat_operations = {
+static const struct file_operations proc_schedstat_operations = {
 	.open    = schedstat_open,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
 	.release = single_release,
 };
 
+static int __init proc_schedstat_init(void)
+{
+	proc_create("schedstat", 0, NULL, &proc_schedstat_operations);
+	return 0;
+}
+module_init(proc_schedstat_init);
+
 /*
  * Expects runqueue lock to be held for atomicity of update
  */
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index af3c7ce..9bc4c00 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -37,9 +37,13 @@
 /* Like num_online_cpus(), but hotplug cpu uses us, so we need this. */
 static unsigned int num_threads;
 static atomic_t thread_ack;
-static struct completion finished;
 static DEFINE_MUTEX(lock);
 
+static struct workqueue_struct *stop_machine_wq;
+static struct stop_machine_data active, idle;
+static const cpumask_t *active_cpus;
+static void *stop_machine_work;
+
 static void set_state(enum stopmachine_state newstate)
 {
 	/* Reset ack counter. */
@@ -51,21 +55,26 @@
 /* Last one to ack a state moves to the next state. */
 static void ack_state(void)
 {
-	if (atomic_dec_and_test(&thread_ack)) {
-		/* If we're the last one to ack the EXIT, we're finished. */
-		if (state == STOPMACHINE_EXIT)
-			complete(&finished);
-		else
-			set_state(state + 1);
-	}
+	if (atomic_dec_and_test(&thread_ack))
+		set_state(state + 1);
 }
 
-/* This is the actual thread which stops the CPU.  It exits by itself rather
- * than waiting for kthread_stop(), because it's easier for hotplug CPU. */
-static int stop_cpu(struct stop_machine_data *smdata)
+/* This is the actual function which stops the CPU. It runs
+ * in the context of a dedicated stopmachine workqueue. */
+static void stop_cpu(struct work_struct *unused)
 {
 	enum stopmachine_state curstate = STOPMACHINE_NONE;
+	struct stop_machine_data *smdata = &idle;
+	int cpu = smp_processor_id();
+	int err;
 
+	if (!active_cpus) {
+		if (cpu == first_cpu(cpu_online_map))
+			smdata = &active;
+	} else {
+		if (cpu_isset(cpu, *active_cpus))
+			smdata = &active;
+	}
 	/* Simple state machine */
 	do {
 		/* Chill out and ensure we re-read stopmachine_state. */
@@ -78,9 +87,11 @@
 				hard_irq_disable();
 				break;
 			case STOPMACHINE_RUN:
-				/* |= allows error detection if functions on
-				 * multiple CPUs. */
-				smdata->fnret |= smdata->fn(smdata->data);
+				/* On multiple CPUs only a single error code
+				 * is needed to tell that something failed. */
+				err = smdata->fn(smdata->data);
+				if (err)
+					smdata->fnret = err;
 				break;
 			default:
 				break;
@@ -90,7 +101,6 @@
 	} while (curstate != STOPMACHINE_EXIT);
 
 	local_irq_enable();
-	do_exit(0);
 }
 
 /* Callback for CPUs which aren't supposed to do anything. */
@@ -101,78 +111,34 @@
 
 int __stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus)
 {
-	int i, err;
-	struct stop_machine_data active, idle;
-	struct task_struct **threads;
+	struct work_struct *sm_work;
+	int i;
 
+	/* Set up initial state. */
+	mutex_lock(&lock);
+	num_threads = num_online_cpus();
+	active_cpus = cpus;
 	active.fn = fn;
 	active.data = data;
 	active.fnret = 0;
 	idle.fn = chill;
 	idle.data = NULL;
 
-	/* This could be too big for stack on large machines. */
-	threads = kcalloc(NR_CPUS, sizeof(threads[0]), GFP_KERNEL);
-	if (!threads)
-		return -ENOMEM;
-
-	/* Set up initial state. */
-	mutex_lock(&lock);
-	init_completion(&finished);
-	num_threads = num_online_cpus();
 	set_state(STOPMACHINE_PREPARE);
 
-	for_each_online_cpu(i) {
-		struct stop_machine_data *smdata = &idle;
-		struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
-
-		if (!cpus) {
-			if (i == first_cpu(cpu_online_map))
-				smdata = &active;
-		} else {
-			if (cpu_isset(i, *cpus))
-				smdata = &active;
-		}
-
-		threads[i] = kthread_create((void *)stop_cpu, smdata, "kstop%u",
-					    i);
-		if (IS_ERR(threads[i])) {
-			err = PTR_ERR(threads[i]);
-			threads[i] = NULL;
-			goto kill_threads;
-		}
-
-		/* Place it onto correct cpu. */
-		kthread_bind(threads[i], i);
-
-		/* Make it highest prio. */
-		if (sched_setscheduler_nocheck(threads[i], SCHED_FIFO, &param))
-			BUG();
-	}
-
-	/* We've created all the threads.  Wake them all: hold this CPU so one
+	/* Schedule the stop_cpu work on all cpus: hold this CPU so one
 	 * doesn't hit this CPU until we're ready. */
 	get_cpu();
-	for_each_online_cpu(i)
-		wake_up_process(threads[i]);
-
+	for_each_online_cpu(i) {
+		sm_work = percpu_ptr(stop_machine_work, i);
+		INIT_WORK(sm_work, stop_cpu);
+		queue_work_on(i, stop_machine_wq, sm_work);
+	}
 	/* This will release the thread on our CPU. */
 	put_cpu();
-	wait_for_completion(&finished);
+	flush_workqueue(stop_machine_wq);
 	mutex_unlock(&lock);
-
-	kfree(threads);
-
 	return active.fnret;
-
-kill_threads:
-	for_each_online_cpu(i)
-		if (threads[i])
-			kthread_stop(threads[i]);
-	mutex_unlock(&lock);
-
-	kfree(threads);
-	return err;
 }
 
 int stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus)
@@ -187,3 +153,11 @@
 	return ret;
 }
 EXPORT_SYMBOL_GPL(stop_machine);
+
+static int __init stop_machine_init(void)
+{
+	stop_machine_wq = create_rt_workqueue("kstop");
+	stop_machine_work = alloc_percpu(struct work_struct);
+	return 0;
+}
+core_initcall(stop_machine_init);
diff --git a/kernel/sys.c b/kernel/sys.c
index 53879cd..31deba8 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1716,6 +1716,16 @@
 		case PR_SET_TSC:
 			error = SET_TSC_CTL(arg2);
 			break;
+		case PR_GET_TIMERSLACK:
+			error = current->timer_slack_ns;
+			break;
+		case PR_SET_TIMERSLACK:
+			if (arg2 <= 0)
+				current->timer_slack_ns =
+					current->default_timer_slack_ns;
+			else
+				current->timer_slack_ns = arg2;
+			break;
 		default:
 			error = -EINVAL;
 			break;
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index b3cc739..a13bd4d 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -276,6 +276,16 @@
 	},
 	{
 		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "sched_shares_thresh",
+		.data		= &sysctl_sched_shares_thresh,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec_minmax,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &zero,
+	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sched_child_runs_first",
 		.data		= &sysctl_sched_child_runs_first,
 		.maxlen		= sizeof(unsigned int),
diff --git a/kernel/time.c b/kernel/time.c
index 6a08660..d63a433 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -669,3 +669,21 @@
 #endif
 
 EXPORT_SYMBOL(jiffies);
+
+/*
+ * Add two timespec values and do a safety check for overflow.
+ * It's assumed that both values are valid (>= 0)
+ */
+struct timespec timespec_add_safe(const struct timespec lhs,
+				  const struct timespec rhs)
+{
+	struct timespec res;
+
+	set_normalized_timespec(&res, lhs.tv_sec + rhs.tv_sec,
+				lhs.tv_nsec + rhs.tv_nsec);
+
+	if (res.tv_sec < lhs.tv_sec || res.tv_sec < rhs.tv_sec)
+		res.tv_sec = TIME_T_MAX;
+
+	return res;
+}
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 1a20715..8ff15e5 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -142,8 +142,7 @@
 		time_state = TIME_OOP;
 		printk(KERN_NOTICE "Clock: "
 		       "inserting leap second 23:59:60 UTC\n");
-		leap_timer.expires = ktime_add_ns(leap_timer.expires,
-						  NSEC_PER_SEC);
+		hrtimer_add_expires_ns(&leap_timer, NSEC_PER_SEC);
 		res = HRTIMER_RESTART;
 		break;
 	case TIME_DEL:
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 0581c11..5bbb104 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -300,7 +300,7 @@
 				goto out;
 			}
 
-			ts->idle_tick = ts->sched_timer.expires;
+			ts->idle_tick = hrtimer_get_expires(&ts->sched_timer);
 			ts->tick_stopped = 1;
 			ts->idle_jiffies = last_jiffies;
 			rcu_enter_nohz();
@@ -380,21 +380,21 @@
 static void tick_nohz_restart(struct tick_sched *ts, ktime_t now)
 {
 	hrtimer_cancel(&ts->sched_timer);
-	ts->sched_timer.expires = ts->idle_tick;
+	hrtimer_set_expires(&ts->sched_timer, ts->idle_tick);
 
 	while (1) {
 		/* Forward the time to expire in the future */
 		hrtimer_forward(&ts->sched_timer, now, tick_period);
 
 		if (ts->nohz_mode == NOHZ_MODE_HIGHRES) {
-			hrtimer_start(&ts->sched_timer,
-				      ts->sched_timer.expires,
+			hrtimer_start_expires(&ts->sched_timer,
 				      HRTIMER_MODE_ABS);
 			/* Check, if the timer was already in the past */
 			if (hrtimer_active(&ts->sched_timer))
 				break;
 		} else {
-			if (!tick_program_event(ts->sched_timer.expires, 0))
+			if (!tick_program_event(
+				hrtimer_get_expires(&ts->sched_timer), 0))
 				break;
 		}
 		/* Update jiffies and reread time */
@@ -456,14 +456,16 @@
 	 */
 	ts->tick_stopped  = 0;
 	ts->idle_exittime = now;
+
 	tick_nohz_restart(ts, now);
+
 	local_irq_enable();
 }
 
 static int tick_nohz_reprogram(struct tick_sched *ts, ktime_t now)
 {
 	hrtimer_forward(&ts->sched_timer, now, tick_period);
-	return tick_program_event(ts->sched_timer.expires, 0);
+	return tick_program_event(hrtimer_get_expires(&ts->sched_timer), 0);
 }
 
 /*
@@ -542,7 +544,7 @@
 	next = tick_init_jiffy_update();
 
 	for (;;) {
-		ts->sched_timer.expires = next;
+		hrtimer_set_expires(&ts->sched_timer, next);
 		if (!tick_program_event(next, 0))
 			break;
 		next = ktime_add(next, tick_period);
@@ -567,11 +569,21 @@
 static void tick_nohz_kick_tick(int cpu)
 {
 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
+	ktime_t delta, now;
 
 	if (!ts->tick_stopped)
 		return;
 
-	tick_nohz_restart(ts, ktime_get());
+	/*
+	 * Do not touch the tick device, when the next expiry is either
+	 * already reached or less/equal than the tick period.
+	 */
+	now = ktime_get();
+	delta =	ktime_sub(hrtimer_get_expires(&ts->sched_timer), now);
+	if (delta.tv64 <= tick_period.tv64)
+		return;
+
+	tick_nohz_restart(ts, now);
 }
 
 #else
@@ -668,16 +680,15 @@
 	ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
 
 	/* Get the next period (per cpu) */
-	ts->sched_timer.expires = tick_init_jiffy_update();
+	hrtimer_set_expires(&ts->sched_timer, tick_init_jiffy_update());
 	offset = ktime_to_ns(tick_period) >> 1;
 	do_div(offset, num_possible_cpus());
 	offset *= smp_processor_id();
-	ts->sched_timer.expires = ktime_add_ns(ts->sched_timer.expires, offset);
+	hrtimer_add_expires_ns(&ts->sched_timer, offset);
 
 	for (;;) {
 		hrtimer_forward(&ts->sched_timer, now, tick_period);
-		hrtimer_start(&ts->sched_timer, ts->sched_timer.expires,
-			      HRTIMER_MODE_ABS);
+		hrtimer_start_expires(&ts->sched_timer, HRTIMER_MODE_ABS);
 		/* Check, if the timer was already in the past */
 		if (hrtimer_active(&ts->sched_timer))
 			break;
diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c
index f642691..a999b92 100644
--- a/kernel/time/timer_list.c
+++ b/kernel/time/timer_list.c
@@ -66,9 +66,11 @@
 	SEQ_printf(m, ", %s/%d", tmp, timer->start_pid);
 #endif
 	SEQ_printf(m, "\n");
-	SEQ_printf(m, " # expires at %Lu nsecs [in %Ld nsecs]\n",
-		(unsigned long long)ktime_to_ns(timer->expires),
-		(long long)(ktime_to_ns(timer->expires) - now));
+	SEQ_printf(m, " # expires at %Lu-%Lu nsecs [in %Ld to %Ld nsecs]\n",
+		(unsigned long long)ktime_to_ns(hrtimer_get_softexpires(timer)),
+		(unsigned long long)ktime_to_ns(hrtimer_get_expires(timer)),
+		(long long)(ktime_to_ns(hrtimer_get_softexpires(timer)) - now),
+		(long long)(ktime_to_ns(hrtimer_get_expires(timer)) - now));
 }
 
 static void
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 714afad..f928f2a 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -62,6 +62,7 @@
 	const char *name;
 	int singlethread;
 	int freezeable;		/* Freeze threads during suspend */
+	int rt;
 #ifdef CONFIG_LOCKDEP
 	struct lockdep_map lockdep_map;
 #endif
@@ -766,6 +767,7 @@
 
 static int create_workqueue_thread(struct cpu_workqueue_struct *cwq, int cpu)
 {
+	struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
 	struct workqueue_struct *wq = cwq->wq;
 	const char *fmt = is_single_threaded(wq) ? "%s" : "%s/%d";
 	struct task_struct *p;
@@ -781,7 +783,8 @@
 	 */
 	if (IS_ERR(p))
 		return PTR_ERR(p);
-
+	if (cwq->wq->rt)
+		sched_setscheduler_nocheck(p, SCHED_FIFO, &param);
 	cwq->thread = p;
 
 	return 0;
@@ -801,6 +804,7 @@
 struct workqueue_struct *__create_workqueue_key(const char *name,
 						int singlethread,
 						int freezeable,
+						int rt,
 						struct lock_class_key *key,
 						const char *lock_name)
 {
@@ -822,6 +826,7 @@
 	lockdep_init_map(&wq->lockdep_map, lock_name, key, 0);
 	wq->singlethread = singlethread;
 	wq->freezeable = freezeable;
+	wq->rt = rt;
 	INIT_LIST_HEAD(&wq->list);
 
 	if (singlethread) {
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 482df94..1338469 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -996,3 +996,25 @@
 	return 0;
 }
 EXPORT_SYMBOL(bitmap_allocate_region);
+
+/**
+ * bitmap_copy_le - copy a bitmap, putting the bits into little-endian order.
+ * @dst:   destination buffer
+ * @src:   bitmap to copy
+ * @nbits: number of bits in the bitmap
+ *
+ * Require nbits % BITS_PER_LONG == 0.
+ */
+void bitmap_copy_le(void *dst, const unsigned long *src, int nbits)
+{
+	unsigned long *d = dst;
+	int i;
+
+	for (i = 0; i < nbits/BITS_PER_LONG; i++) {
+		if (BITS_PER_LONG == 64)
+			d[i] = cpu_to_le64(src[i]);
+		else
+			d[i] = cpu_to_le32(src[i]);
+	}
+}
+EXPORT_SYMBOL(bitmap_copy_le);
diff --git a/lib/string_helpers.c b/lib/string_helpers.c
index 8347925..ab431d4 100644
--- a/lib/string_helpers.c
+++ b/lib/string_helpers.c
@@ -23,7 +23,7 @@
 int string_get_size(u64 size, const enum string_size_units units,
 		    char *buf, int len)
 {
-	const char *units_10[] = { "B", "KB", "MB", "GB", "TB", "PB",
+	const char *units_10[] = { "B", "kB", "MB", "GB", "TB", "PB",
 				   "EB", "ZB", "YB", NULL};
 	const char *units_2[] = {"B", "KiB", "MiB", "GiB", "TiB", "PiB",
 				 "EiB", "ZiB", "YiB", NULL };
@@ -31,7 +31,7 @@
 		[STRING_UNITS_10] =  units_10,
 		[STRING_UNITS_2] = units_2,
 	};
-	const int divisor[] = {
+	const unsigned int divisor[] = {
 		[STRING_UNITS_10] = 1000,
 		[STRING_UNITS_2] = 1024,
 	};
@@ -40,23 +40,27 @@
 	char tmp[8];
 
 	tmp[0] = '\0';
+	i = 0;
+	if (size >= divisor[units]) {
+		while (size >= divisor[units] && units_str[units][i]) {
+			remainder = do_div(size, divisor[units]);
+			i++;
+		}
 
-	for (i = 0; size > divisor[units] && units_str[units][i]; i++)
-		remainder = do_div(size, divisor[units]);
+		sf_cap = size;
+		for (j = 0; sf_cap*10 < 1000; j++)
+			sf_cap *= 10;
 
-	sf_cap = size;
-	for (j = 0; sf_cap*10 < 1000; j++)
-		sf_cap *= 10;
-
-	if (j) {
-		remainder *= 1000;
-		do_div(remainder, divisor[units]);
-		snprintf(tmp, sizeof(tmp), ".%03lld",
-			 (unsigned long long)remainder);
-		tmp[j+1] = '\0';
+		if (j) {
+			remainder *= 1000;
+			do_div(remainder, divisor[units]);
+			snprintf(tmp, sizeof(tmp), ".%03lld",
+				 (unsigned long long)remainder);
+			tmp[j+1] = '\0';
+		}
 	}
 
-	snprintf(buf, len, "%lld%s%s", (unsigned long long)size,
+	snprintf(buf, len, "%lld%s %s", (unsigned long long)size,
 		 tmp, units_str[units][i]);
 
 	return 0;
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index ce8cbb2..421aee9 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -7,6 +7,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/mm.h>
+#include <linux/seq_file.h>
 #include <linux/sysctl.h>
 #include <linux/highmem.h>
 #include <linux/mmu_notifier.h>
@@ -1455,10 +1456,10 @@
 
 #endif /* CONFIG_SYSCTL */
 
-int hugetlb_report_meminfo(char *buf)
+void hugetlb_report_meminfo(struct seq_file *m)
 {
 	struct hstate *h = &default_hstate;
-	return sprintf(buf,
+	seq_printf(m,
 			"HugePages_Total:   %5lu\n"
 			"HugePages_Free:    %5lu\n"
 			"HugePages_Rsvd:    %5lu\n"
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index d4a92b6..866dcc7 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1088,7 +1088,6 @@
 	int node;
 
 	if (unlikely((cont->parent) == NULL)) {
-		page_cgroup_init();
 		mem = &init_mem_cgroup;
 	} else {
 		mem = mem_cgroup_alloc();
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 5d86550..f59d797 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -4,7 +4,10 @@
 #include <linux/bit_spinlock.h>
 #include <linux/page_cgroup.h>
 #include <linux/hash.h>
+#include <linux/slab.h>
 #include <linux/memory.h>
+#include <linux/vmalloc.h>
+#include <linux/cgroup.h>
 
 static void __meminit
 __init_page_cgroup(struct page_cgroup *pc, unsigned long pfn)
@@ -66,6 +69,9 @@
 
 	int nid, fail;
 
+	if (mem_cgroup_subsys.disabled)
+		return;
+
 	for_each_online_node(nid)  {
 		fail = alloc_node_page_cgroup(nid);
 		if (fail)
@@ -106,9 +112,14 @@
 	nid = page_to_nid(pfn_to_page(pfn));
 
 	table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
-	base = kmalloc_node(table_size, GFP_KERNEL, nid);
-	if (!base)
-		base = vmalloc_node(table_size, nid);
+	if (slab_is_available()) {
+		base = kmalloc_node(table_size, GFP_KERNEL, nid);
+		if (!base)
+			base = vmalloc_node(table_size, nid);
+	} else {
+		base = __alloc_bootmem_node_nopanic(NODE_DATA(nid), table_size,
+				PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
+	}
 
 	if (!base) {
 		printk(KERN_ERR "page cgroup allocation failure\n");
@@ -135,11 +146,16 @@
 	if (!ms || !ms->page_cgroup)
 		return;
 	base = ms->page_cgroup + pfn;
-	ms->page_cgroup = NULL;
-	if (is_vmalloc_addr(base))
+	if (is_vmalloc_addr(base)) {
 		vfree(base);
-	else
-		kfree(base);
+		ms->page_cgroup = NULL;
+	} else {
+		struct page *page = virt_to_page(base);
+		if (!PageReserved(page)) { /* Is bootmem ? */
+			kfree(base);
+			ms->page_cgroup = NULL;
+		}
+	}
 }
 
 int online_page_cgroup(unsigned long start_pfn,
@@ -213,6 +229,9 @@
 	unsigned long pfn;
 	int fail = 0;
 
+	if (mem_cgroup_subsys.disabled)
+		return;
+
 	for (pfn = 0; !fail && pfn < max_pfn; pfn += PAGES_PER_SECTION) {
 		if (!pfn_present(pfn))
 			continue;
diff --git a/mm/slab.c b/mm/slab.c
index e76eee4..0918751 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -95,6 +95,7 @@
 #include	<linux/init.h>
 #include	<linux/compiler.h>
 #include	<linux/cpuset.h>
+#include	<linux/proc_fs.h>
 #include	<linux/seq_file.h>
 #include	<linux/notifier.h>
 #include	<linux/kallsyms.h>
@@ -4258,7 +4259,7 @@
  * + further values on SMP and with statistics enabled
  */
 
-const struct seq_operations slabinfo_op = {
+static const struct seq_operations slabinfo_op = {
 	.start = s_start,
 	.next = s_next,
 	.stop = s_stop,
@@ -4315,6 +4316,19 @@
 	return res;
 }
 
+static int slabinfo_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &slabinfo_op);
+}
+
+static const struct file_operations proc_slabinfo_operations = {
+	.open		= slabinfo_open,
+	.read		= seq_read,
+	.write		= slabinfo_write,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
 #ifdef CONFIG_DEBUG_SLAB_LEAK
 
 static void *leaks_start(struct seq_file *m, loff_t *pos)
@@ -4443,13 +4457,47 @@
 	return 0;
 }
 
-const struct seq_operations slabstats_op = {
+static const struct seq_operations slabstats_op = {
 	.start = leaks_start,
 	.next = s_next,
 	.stop = s_stop,
 	.show = leaks_show,
 };
+
+static int slabstats_open(struct inode *inode, struct file *file)
+{
+	unsigned long *n = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	int ret = -ENOMEM;
+	if (n) {
+		ret = seq_open(file, &slabstats_op);
+		if (!ret) {
+			struct seq_file *m = file->private_data;
+			*n = PAGE_SIZE / (2 * sizeof(unsigned long));
+			m->private = n;
+			n = NULL;
+		}
+		kfree(n);
+	}
+	return ret;
+}
+
+static const struct file_operations proc_slabstats_operations = {
+	.open		= slabstats_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release_private,
+};
 #endif
+
+static int __init slab_proc_init(void)
+{
+	proc_create("slabinfo",S_IWUSR|S_IRUGO,NULL,&proc_slabinfo_operations);
+#ifdef CONFIG_DEBUG_SLAB_LEAK
+	proc_create("slab_allocators", 0, NULL, &proc_slabstats_operations);
+#endif
+	return 0;
+}
+module_init(slab_proc_init);
 #endif
 
 /**
diff --git a/mm/slub.c b/mm/slub.c
index 0c83e6a..7ad489a 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -14,6 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/bitops.h>
 #include <linux/slab.h>
+#include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/cpu.h>
 #include <linux/cpuset.h>
@@ -4417,14 +4418,6 @@
  * The /proc/slabinfo ABI
  */
 #ifdef CONFIG_SLABINFO
-
-ssize_t slabinfo_write(struct file *file, const char __user *buffer,
-		       size_t count, loff_t *ppos)
-{
-	return -EINVAL;
-}
-
-
 static void print_slabinfo_header(struct seq_file *m)
 {
 	seq_puts(m, "slabinfo - version: 2.1\n");
@@ -4492,11 +4485,29 @@
 	return 0;
 }
 
-const struct seq_operations slabinfo_op = {
+static const struct seq_operations slabinfo_op = {
 	.start = s_start,
 	.next = s_next,
 	.stop = s_stop,
 	.show = s_show,
 };
 
+static int slabinfo_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &slabinfo_op);
+}
+
+static const struct file_operations proc_slabinfo_operations = {
+	.open		= slabinfo_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int __init slab_proc_init(void)
+{
+	proc_create("slabinfo",S_IWUSR|S_IRUGO,NULL,&proc_slabinfo_operations);
+	return 0;
+}
+module_init(slab_proc_init);
 #endif /* CONFIG_SLABINFO */
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 65ae576..0365369 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
+#include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/debugobjects.h>
 #include <linux/kallsyms.h>
@@ -1718,11 +1719,41 @@
 	return 0;
 }
 
-const struct seq_operations vmalloc_op = {
+static const struct seq_operations vmalloc_op = {
 	.start = s_start,
 	.next = s_next,
 	.stop = s_stop,
 	.show = s_show,
 };
+
+static int vmalloc_open(struct inode *inode, struct file *file)
+{
+	unsigned int *ptr = NULL;
+	int ret;
+
+	if (NUMA_BUILD)
+		ptr = kmalloc(nr_node_ids * sizeof(unsigned int), GFP_KERNEL);
+	ret = seq_open(file, &vmalloc_op);
+	if (!ret) {
+		struct seq_file *m = file->private_data;
+		m->private = ptr;
+	} else
+		kfree(ptr);
+	return ret;
+}
+
+static const struct file_operations proc_vmalloc_operations = {
+	.open		= vmalloc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release_private,
+};
+
+static int __init proc_vmalloc_init(void)
+{
+	proc_create("vmallocinfo", S_IRUSR, NULL, &proc_vmalloc_operations);
+	return 0;
+}
+module_init(proc_vmalloc_init);
 #endif
 
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 9343227..c3ccfda 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -8,7 +8,7 @@
  *  Copyright (C) 2006 Silicon Graphics, Inc.,
  *		Christoph Lameter <christoph@lameter.com>
  */
-
+#include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/err.h>
 #include <linux/module.h>
@@ -384,7 +384,7 @@
 #endif
 
 #ifdef CONFIG_PROC_FS
-
+#include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 
 static char * const migratetype_names[MIGRATE_TYPES] = {
@@ -581,20 +581,44 @@
 	return 0;
 }
 
-const struct seq_operations fragmentation_op = {
+static const struct seq_operations fragmentation_op = {
 	.start	= frag_start,
 	.next	= frag_next,
 	.stop	= frag_stop,
 	.show	= frag_show,
 };
 
-const struct seq_operations pagetypeinfo_op = {
+static int fragmentation_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &fragmentation_op);
+}
+
+static const struct file_operations fragmentation_file_operations = {
+	.open		= fragmentation_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static const struct seq_operations pagetypeinfo_op = {
 	.start	= frag_start,
 	.next	= frag_next,
 	.stop	= frag_stop,
 	.show	= pagetypeinfo_show,
 };
 
+static int pagetypeinfo_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &pagetypeinfo_op);
+}
+
+static const struct file_operations pagetypeinfo_file_ops = {
+	.open		= pagetypeinfo_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
 #ifdef CONFIG_ZONE_DMA
 #define TEXT_FOR_DMA(xx) xx "_dma",
 #else
@@ -771,7 +795,7 @@
 	return 0;
 }
 
-const struct seq_operations zoneinfo_op = {
+static const struct seq_operations zoneinfo_op = {
 	.start	= frag_start, /* iterate over all zones. The same as in
 			       * fragmentation. */
 	.next	= frag_next,
@@ -779,6 +803,18 @@
 	.show	= zoneinfo_show,
 };
 
+static int zoneinfo_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &zoneinfo_op);
+}
+
+static const struct file_operations proc_zoneinfo_file_operations = {
+	.open		= zoneinfo_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
 static void *vmstat_start(struct seq_file *m, loff_t *pos)
 {
 	unsigned long *v;
@@ -834,13 +870,24 @@
 	m->private = NULL;
 }
 
-const struct seq_operations vmstat_op = {
+static const struct seq_operations vmstat_op = {
 	.start	= vmstat_start,
 	.next	= vmstat_next,
 	.stop	= vmstat_stop,
 	.show	= vmstat_show,
 };
 
+static int vmstat_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &vmstat_op);
+}
+
+static const struct file_operations proc_vmstat_file_operations = {
+	.open		= vmstat_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
 #endif /* CONFIG_PROC_FS */
 
 #ifdef CONFIG_SMP
@@ -898,9 +945,11 @@
 
 static struct notifier_block __cpuinitdata vmstat_notifier =
 	{ &vmstat_cpuup_callback, NULL, 0 };
+#endif
 
 static int __init setup_vmstat(void)
 {
+#ifdef CONFIG_SMP
 	int cpu;
 
 	refresh_zone_stat_thresholds();
@@ -908,7 +957,13 @@
 
 	for_each_online_cpu(cpu)
 		start_cpu_timer(cpu);
+#endif
+#ifdef CONFIG_PROC_FS
+	proc_create("buddyinfo", S_IRUGO, NULL, &fragmentation_file_operations);
+	proc_create("pagetypeinfo", S_IRUGO, NULL, &pagetypeinfo_file_ops);
+	proc_create("vmstat", S_IRUGO, NULL, &proc_vmstat_file_operations);
+	proc_create("zoneinfo", S_IRUGO, NULL, &proc_zoneinfo_file_operations);
+#endif
 	return 0;
 }
 module_init(setup_vmstat)
-#endif
diff --git a/net/9p/Kconfig b/net/9p/Kconfig
index ff34c5a..c42c0c4 100644
--- a/net/9p/Kconfig
+++ b/net/9p/Kconfig
@@ -20,6 +20,12 @@
 	  This builds support for a transports between
 	  guest partitions and a host partition.
 
+config NET_9P_RDMA
+	depends on NET_9P && INFINIBAND && EXPERIMENTAL
+	tristate "9P RDMA Transport (Experimental)"
+	help
+	  This builds support for a RDMA transport.
+
 config NET_9P_DEBUG
 	bool "Debug information"
 	depends on NET_9P
diff --git a/net/9p/Makefile b/net/9p/Makefile
index 1041b7b..198a640 100644
--- a/net/9p/Makefile
+++ b/net/9p/Makefile
@@ -1,5 +1,6 @@
 obj-$(CONFIG_NET_9P) := 9pnet.o
 obj-$(CONFIG_NET_9P_VIRTIO) += 9pnet_virtio.o
+obj-$(CONFIG_NET_9P_RDMA) += 9pnet_rdma.o
 
 9pnet-objs := \
 	mod.o \
@@ -11,3 +12,6 @@
 
 9pnet_virtio-objs := \
 	trans_virtio.o \
+
+9pnet_rdma-objs := \
+	trans_rdma.o \
diff --git a/net/9p/client.c b/net/9p/client.c
index bbac2f7..67717f6 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -159,6 +159,7 @@
 
 			if (!c->reqs[row]) {
 				printk(KERN_ERR "Couldn't grow tag array\n");
+				spin_unlock_irqrestore(&c->lock, flags);
 				return ERR_PTR(-ENOMEM);
 			}
 			for (col = 0; col < P9_ROW_MAXTAG; col++) {
diff --git a/net/9p/protocol.c b/net/9p/protocol.c
index 29be524..dcd7666 100644
--- a/net/9p/protocol.c
+++ b/net/9p/protocol.c
@@ -53,6 +53,7 @@
 static int
 p9pdu_writef(struct p9_fcall *pdu, int optional, const char *fmt, ...);
 
+#ifdef CONFIG_NET_9P_DEBUG
 void
 p9pdu_dump(int way, struct p9_fcall *pdu)
 {
@@ -81,6 +82,12 @@
 	else
 		P9_DPRINTK(P9_DEBUG_PKT, "]]](%d) %s\n", datalen, buf);
 }
+#else
+void
+p9pdu_dump(int way, struct p9_fcall *pdu)
+{
+}
+#endif
 EXPORT_SYMBOL(p9pdu_dump);
 
 void p9stat_free(struct p9_wstat *stbuf)
@@ -179,7 +186,7 @@
 			}
 			break;
 		case 's':{
-				char **ptr = va_arg(ap, char **);
+				char **sptr = va_arg(ap, char **);
 				int16_t len;
 				int size;
 
@@ -189,17 +196,17 @@
 
 				size = MAX(len, 0);
 
-				*ptr = kmalloc(size + 1, GFP_KERNEL);
-				if (*ptr == NULL) {
+				*sptr = kmalloc(size + 1, GFP_KERNEL);
+				if (*sptr == NULL) {
 					errcode = -EFAULT;
 					break;
 				}
-				if (pdu_read(pdu, *ptr, size)) {
+				if (pdu_read(pdu, *sptr, size)) {
 					errcode = -EFAULT;
-					kfree(*ptr);
-					*ptr = NULL;
+					kfree(*sptr);
+					*sptr = NULL;
 				} else
-					(*ptr)[size] = 0;
+					(*sptr)[size] = 0;
 			}
 			break;
 		case 'Q':{
@@ -373,13 +380,13 @@
 			}
 			break;
 		case 's':{
-				const char *ptr = va_arg(ap, const char *);
+				const char *sptr = va_arg(ap, const char *);
 				int16_t len = 0;
-				if (ptr)
-					len = MIN(strlen(ptr), USHORT_MAX);
+				if (sptr)
+					len = MIN(strlen(sptr), USHORT_MAX);
 
 				errcode = p9pdu_writef(pdu, optional, "w", len);
-				if (!errcode && pdu_write(pdu, ptr, len))
+				if (!errcode && pdu_write(pdu, sptr, len))
 					errcode = -EFAULT;
 			}
 			break;
@@ -419,7 +426,7 @@
 		case 'U':{
 				int32_t count = va_arg(ap, int32_t);
 				const char __user *udata =
-						va_arg(ap, const void *);
+						va_arg(ap, const void __user *);
 				errcode =
 				    p9pdu_writef(pdu, optional, "d", count);
 				if (!errcode && pdu_write_u(pdu, udata, count))
@@ -542,8 +549,10 @@
 	err = p9pdu_writef(pdu, 0, "d", size);
 	pdu->size = size;
 
+#ifdef CONFIG_NET_9P_DEBUG
 	if ((p9_debug_level & P9_DEBUG_PKT) == P9_DEBUG_PKT)
 		p9pdu_dump(0, pdu);
+#endif
 
 	P9_DPRINTK(P9_DEBUG_9P, ">>> size=%d type: %d tag: %d\n", pdu->size,
 							pdu->id, pdu->tag);
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index be65d82..1df0356 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -678,11 +678,9 @@
 
 static int p9_fd_cancel(struct p9_client *client, struct p9_req_t *req)
 {
-	struct p9_trans_fd *ts = client->trans;
-	struct p9_conn *m = ts->conn;
 	int ret = 1;
 
-	P9_DPRINTK(P9_DEBUG_TRANS, "mux %p req %p\n", m, req);
+	P9_DPRINTK(P9_DEBUG_TRANS, "client %p req %p\n", client, req);
 
 	spin_lock(&client->lock);
 	list_del(&req->req_list);
diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c
new file mode 100644
index 0000000..8d6cc47
--- /dev/null
+++ b/net/9p/trans_rdma.c
@@ -0,0 +1,712 @@
+/*
+ * linux/fs/9p/trans_rdma.c
+ *
+ * RDMA transport layer based on the trans_fd.c implementation.
+ *
+ *  Copyright (C) 2008 by Tom Tucker <tom@opengridcomputing.com>
+ *  Copyright (C) 2006 by Russ Cox <rsc@swtch.com>
+ *  Copyright (C) 2004-2005 by Latchesar Ionkov <lucho@ionkov.net>
+ *  Copyright (C) 2004-2008 by Eric Van Hensbergen <ericvh@gmail.com>
+ *  Copyright (C) 1997-2002 by Ron Minnich <rminnich@sarnoff.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2
+ *  as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to:
+ *  Free Software Foundation
+ *  51 Franklin Street, Fifth Floor
+ *  Boston, MA  02111-1301  USA
+ *
+ */
+
+#include <linux/in.h>
+#include <linux/module.h>
+#include <linux/net.h>
+#include <linux/ipv6.h>
+#include <linux/kthread.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/un.h>
+#include <linux/uaccess.h>
+#include <linux/inet.h>
+#include <linux/idr.h>
+#include <linux/file.h>
+#include <linux/parser.h>
+#include <linux/semaphore.h>
+#include <net/9p/9p.h>
+#include <net/9p/client.h>
+#include <net/9p/transport.h>
+#include <rdma/ib_verbs.h>
+#include <rdma/rdma_cm.h>
+#include <rdma/ib_verbs.h>
+
+#define P9_PORT			5640
+#define P9_RDMA_SQ_DEPTH	32
+#define P9_RDMA_RQ_DEPTH	32
+#define P9_RDMA_SEND_SGE	4
+#define P9_RDMA_RECV_SGE	4
+#define P9_RDMA_IRD		0
+#define P9_RDMA_ORD		0
+#define P9_RDMA_TIMEOUT		30000		/* 30 seconds */
+#define P9_RDMA_MAXSIZE		(4*4096)	/* Min SGE is 4, so we can
+						 * safely advertise a maxsize
+						 * of 64k */
+
+#define P9_RDMA_MAX_SGE (P9_RDMA_MAXSIZE >> PAGE_SHIFT)
+/**
+ * struct p9_trans_rdma - RDMA transport instance
+ *
+ * @state: tracks the transport state machine for connection setup and tear down
+ * @cm_id: The RDMA CM ID
+ * @pd: Protection Domain pointer
+ * @qp: Queue Pair pointer
+ * @cq: Completion Queue pointer
+ * @lkey: The local access only memory region key
+ * @timeout: Number of uSecs to wait for connection management events
+ * @sq_depth: The depth of the Send Queue
+ * @sq_sem: Semaphore for the SQ
+ * @rq_depth: The depth of the Receive Queue.
+ * @addr: The remote peer's address
+ * @req_lock: Protects the active request list
+ * @send_wait: Wait list when the SQ fills up
+ * @cm_done: Completion event for connection management tracking
+ */
+struct p9_trans_rdma {
+	enum {
+		P9_RDMA_INIT,
+		P9_RDMA_ADDR_RESOLVED,
+		P9_RDMA_ROUTE_RESOLVED,
+		P9_RDMA_CONNECTED,
+		P9_RDMA_FLUSHING,
+		P9_RDMA_CLOSING,
+		P9_RDMA_CLOSED,
+	} state;
+	struct rdma_cm_id *cm_id;
+	struct ib_pd *pd;
+	struct ib_qp *qp;
+	struct ib_cq *cq;
+	struct ib_mr *dma_mr;
+	u32 lkey;
+	long timeout;
+	int sq_depth;
+	struct semaphore sq_sem;
+	int rq_depth;
+	atomic_t rq_count;
+	struct sockaddr_in addr;
+	spinlock_t req_lock;
+
+	struct completion cm_done;
+};
+
+/**
+ * p9_rdma_context - Keeps track of in-process WR
+ *
+ * @wc_op: The original WR op for when the CQE completes in error.
+ * @busa: Bus address to unmap when the WR completes
+ * @req: Keeps track of requests (send)
+ * @rc: Keepts track of replies (receive)
+ */
+struct p9_rdma_req;
+struct p9_rdma_context {
+	enum ib_wc_opcode wc_op;
+	dma_addr_t busa;
+	union {
+		struct p9_req_t *req;
+		struct p9_fcall *rc;
+	};
+};
+
+/**
+ * p9_rdma_opts - Collection of mount options
+ * @port: port of connection
+ * @sq_depth: The requested depth of the SQ. This really doesn't need
+ * to be any deeper than the number of threads used in the client
+ * @rq_depth: The depth of the RQ. Should be greater than or equal to SQ depth
+ * @timeout: Time to wait in msecs for CM events
+ */
+struct p9_rdma_opts {
+	short port;
+	int sq_depth;
+	int rq_depth;
+	long timeout;
+};
+
+/*
+ * Option Parsing (code inspired by NFS code)
+ */
+enum {
+	/* Options that take integer arguments */
+	Opt_port, Opt_rq_depth, Opt_sq_depth, Opt_timeout, Opt_err,
+};
+
+static match_table_t tokens = {
+	{Opt_port, "port=%u"},
+	{Opt_sq_depth, "sq=%u"},
+	{Opt_rq_depth, "rq=%u"},
+	{Opt_timeout, "timeout=%u"},
+	{Opt_err, NULL},
+};
+
+/**
+ * parse_options - parse mount options into session structure
+ * @options: options string passed from mount
+ * @opts: transport-specific structure to parse options into
+ *
+ * Returns 0 upon success, -ERRNO upon failure
+ */
+static int parse_opts(char *params, struct p9_rdma_opts *opts)
+{
+	char *p;
+	substring_t args[MAX_OPT_ARGS];
+	int option;
+	char *options;
+	int ret;
+
+	opts->port = P9_PORT;
+	opts->sq_depth = P9_RDMA_SQ_DEPTH;
+	opts->rq_depth = P9_RDMA_RQ_DEPTH;
+	opts->timeout = P9_RDMA_TIMEOUT;
+
+	if (!params)
+		return 0;
+
+	options = kstrdup(params, GFP_KERNEL);
+	if (!options) {
+		P9_DPRINTK(P9_DEBUG_ERROR,
+			   "failed to allocate copy of option string\n");
+		return -ENOMEM;
+	}
+
+	while ((p = strsep(&options, ",")) != NULL) {
+		int token;
+		int r;
+		if (!*p)
+			continue;
+		token = match_token(p, tokens, args);
+		r = match_int(&args[0], &option);
+		if (r < 0) {
+			P9_DPRINTK(P9_DEBUG_ERROR,
+				   "integer field, but no integer?\n");
+			ret = r;
+			continue;
+		}
+		switch (token) {
+		case Opt_port:
+			opts->port = option;
+			break;
+		case Opt_sq_depth:
+			opts->sq_depth = option;
+			break;
+		case Opt_rq_depth:
+			opts->rq_depth = option;
+			break;
+		case Opt_timeout:
+			opts->timeout = option;
+			break;
+		default:
+			continue;
+		}
+	}
+	/* RQ must be at least as large as the SQ */
+	opts->rq_depth = max(opts->rq_depth, opts->sq_depth);
+	kfree(options);
+	return 0;
+}
+
+static int
+p9_cm_event_handler(struct rdma_cm_id *id, struct rdma_cm_event *event)
+{
+	struct p9_client *c = id->context;
+	struct p9_trans_rdma *rdma = c->trans;
+	switch (event->event) {
+	case RDMA_CM_EVENT_ADDR_RESOLVED:
+		BUG_ON(rdma->state != P9_RDMA_INIT);
+		rdma->state = P9_RDMA_ADDR_RESOLVED;
+		break;
+
+	case RDMA_CM_EVENT_ROUTE_RESOLVED:
+		BUG_ON(rdma->state != P9_RDMA_ADDR_RESOLVED);
+		rdma->state = P9_RDMA_ROUTE_RESOLVED;
+		break;
+
+	case RDMA_CM_EVENT_ESTABLISHED:
+		BUG_ON(rdma->state != P9_RDMA_ROUTE_RESOLVED);
+		rdma->state = P9_RDMA_CONNECTED;
+		break;
+
+	case RDMA_CM_EVENT_DISCONNECTED:
+		if (rdma)
+			rdma->state = P9_RDMA_CLOSED;
+		if (c)
+			c->status = Disconnected;
+		break;
+
+	case RDMA_CM_EVENT_TIMEWAIT_EXIT:
+		break;
+
+	case RDMA_CM_EVENT_ADDR_CHANGE:
+	case RDMA_CM_EVENT_ROUTE_ERROR:
+	case RDMA_CM_EVENT_DEVICE_REMOVAL:
+	case RDMA_CM_EVENT_MULTICAST_JOIN:
+	case RDMA_CM_EVENT_MULTICAST_ERROR:
+	case RDMA_CM_EVENT_REJECTED:
+	case RDMA_CM_EVENT_CONNECT_REQUEST:
+	case RDMA_CM_EVENT_CONNECT_RESPONSE:
+	case RDMA_CM_EVENT_CONNECT_ERROR:
+	case RDMA_CM_EVENT_ADDR_ERROR:
+	case RDMA_CM_EVENT_UNREACHABLE:
+		c->status = Disconnected;
+		rdma_disconnect(rdma->cm_id);
+		break;
+	default:
+		BUG();
+	}
+	complete(&rdma->cm_done);
+	return 0;
+}
+
+static void
+handle_recv(struct p9_client *client, struct p9_trans_rdma *rdma,
+	    struct p9_rdma_context *c, enum ib_wc_status status, u32 byte_len)
+{
+	struct p9_req_t *req;
+	int err = 0;
+	int16_t tag;
+
+	req = NULL;
+	ib_dma_unmap_single(rdma->cm_id->device, c->busa, client->msize,
+							 DMA_FROM_DEVICE);
+
+	if (status != IB_WC_SUCCESS)
+		goto err_out;
+
+	err = p9_parse_header(c->rc, NULL, NULL, &tag, 1);
+	if (err)
+		goto err_out;
+
+	req = p9_tag_lookup(client, tag);
+	if (!req)
+		goto err_out;
+
+	req->rc = c->rc;
+	p9_client_cb(client, req);
+
+	return;
+
+ err_out:
+	P9_DPRINTK(P9_DEBUG_ERROR, "req %p err %d status %d\n",
+		   req, err, status);
+	rdma->state = P9_RDMA_FLUSHING;
+	client->status = Disconnected;
+	return;
+}
+
+static void
+handle_send(struct p9_client *client, struct p9_trans_rdma *rdma,
+	    struct p9_rdma_context *c, enum ib_wc_status status, u32 byte_len)
+{
+	ib_dma_unmap_single(rdma->cm_id->device,
+			    c->busa, c->req->tc->size,
+			    DMA_TO_DEVICE);
+}
+
+static void qp_event_handler(struct ib_event *event, void *context)
+{
+	P9_DPRINTK(P9_DEBUG_ERROR, "QP event %d context %p\n", event->event,
+								context);
+}
+
+static void cq_comp_handler(struct ib_cq *cq, void *cq_context)
+{
+	struct p9_client *client = cq_context;
+	struct p9_trans_rdma *rdma = client->trans;
+	int ret;
+	struct ib_wc wc;
+
+	ib_req_notify_cq(rdma->cq, IB_CQ_NEXT_COMP);
+	while ((ret = ib_poll_cq(cq, 1, &wc)) > 0) {
+		struct p9_rdma_context *c = (void *) (unsigned long) wc.wr_id;
+
+		switch (c->wc_op) {
+		case IB_WC_RECV:
+			atomic_dec(&rdma->rq_count);
+			handle_recv(client, rdma, c, wc.status, wc.byte_len);
+			break;
+
+		case IB_WC_SEND:
+			handle_send(client, rdma, c, wc.status, wc.byte_len);
+			up(&rdma->sq_sem);
+			break;
+
+		default:
+			printk(KERN_ERR "9prdma: unexpected completion type, "
+			       "c->wc_op=%d, wc.opcode=%d, status=%d\n",
+			       c->wc_op, wc.opcode, wc.status);
+			break;
+		}
+		kfree(c);
+	}
+}
+
+static void cq_event_handler(struct ib_event *e, void *v)
+{
+	P9_DPRINTK(P9_DEBUG_ERROR, "CQ event %d context %p\n", e->event, v);
+}
+
+static void rdma_destroy_trans(struct p9_trans_rdma *rdma)
+{
+	if (!rdma)
+		return;
+
+	if (rdma->dma_mr && !IS_ERR(rdma->dma_mr))
+		ib_dereg_mr(rdma->dma_mr);
+
+	if (rdma->qp && !IS_ERR(rdma->qp))
+		ib_destroy_qp(rdma->qp);
+
+	if (rdma->pd && !IS_ERR(rdma->pd))
+		ib_dealloc_pd(rdma->pd);
+
+	if (rdma->cq && !IS_ERR(rdma->cq))
+		ib_destroy_cq(rdma->cq);
+
+	if (rdma->cm_id && !IS_ERR(rdma->cm_id))
+		rdma_destroy_id(rdma->cm_id);
+
+	kfree(rdma);
+}
+
+static int
+post_recv(struct p9_client *client, struct p9_rdma_context *c)
+{
+	struct p9_trans_rdma *rdma = client->trans;
+	struct ib_recv_wr wr, *bad_wr;
+	struct ib_sge sge;
+
+	c->busa = ib_dma_map_single(rdma->cm_id->device,
+				    c->rc->sdata, client->msize,
+				    DMA_FROM_DEVICE);
+	if (ib_dma_mapping_error(rdma->cm_id->device, c->busa))
+		goto error;
+
+	sge.addr = c->busa;
+	sge.length = client->msize;
+	sge.lkey = rdma->lkey;
+
+	wr.next = NULL;
+	c->wc_op = IB_WC_RECV;
+	wr.wr_id = (unsigned long) c;
+	wr.sg_list = &sge;
+	wr.num_sge = 1;
+	return ib_post_recv(rdma->qp, &wr, &bad_wr);
+
+ error:
+	P9_DPRINTK(P9_DEBUG_ERROR, "EIO\n");
+	return -EIO;
+}
+
+static int rdma_request(struct p9_client *client, struct p9_req_t *req)
+{
+	struct p9_trans_rdma *rdma = client->trans;
+	struct ib_send_wr wr, *bad_wr;
+	struct ib_sge sge;
+	int err = 0;
+	unsigned long flags;
+	struct p9_rdma_context *c = NULL;
+	struct p9_rdma_context *rpl_context = NULL;
+
+	/* Allocate an fcall for the reply */
+	rpl_context = kmalloc(sizeof *rpl_context, GFP_KERNEL);
+	if (!rpl_context)
+		goto err_close;
+
+	/*
+	 * If the request has a buffer, steal it, otherwise
+	 * allocate a new one.  Typically, requests should already
+	 * have receive buffers allocated and just swap them around
+	 */
+	if (!req->rc) {
+		req->rc = kmalloc(sizeof(struct p9_fcall)+client->msize,
+								GFP_KERNEL);
+		if (req->rc) {
+			req->rc->sdata = (char *) req->rc +
+						sizeof(struct p9_fcall);
+			req->rc->capacity = client->msize;
+		}
+	}
+	rpl_context->rc = req->rc;
+	if (!rpl_context->rc) {
+		kfree(rpl_context);
+		goto err_close;
+	}
+
+	/*
+	 * Post a receive buffer for this request. We need to ensure
+	 * there is a reply buffer available for every outstanding
+	 * request. A flushed request can result in no reply for an
+	 * outstanding request, so we must keep a count to avoid
+	 * overflowing the RQ.
+	 */
+	if (atomic_inc_return(&rdma->rq_count) <= rdma->rq_depth) {
+		err = post_recv(client, rpl_context);
+		if (err) {
+			kfree(rpl_context->rc);
+			kfree(rpl_context);
+			goto err_close;
+		}
+	} else
+		atomic_dec(&rdma->rq_count);
+
+	/* remove posted receive buffer from request structure */
+	req->rc = NULL;
+
+	/* Post the request */
+	c = kmalloc(sizeof *c, GFP_KERNEL);
+	if (!c)
+		goto err_close;
+	c->req = req;
+
+	c->busa = ib_dma_map_single(rdma->cm_id->device,
+				    c->req->tc->sdata, c->req->tc->size,
+				    DMA_TO_DEVICE);
+	if (ib_dma_mapping_error(rdma->cm_id->device, c->busa))
+		goto error;
+
+	sge.addr = c->busa;
+	sge.length = c->req->tc->size;
+	sge.lkey = rdma->lkey;
+
+	wr.next = NULL;
+	c->wc_op = IB_WC_SEND;
+	wr.wr_id = (unsigned long) c;
+	wr.opcode = IB_WR_SEND;
+	wr.send_flags = IB_SEND_SIGNALED;
+	wr.sg_list = &sge;
+	wr.num_sge = 1;
+
+	if (down_interruptible(&rdma->sq_sem))
+		goto error;
+
+	return ib_post_send(rdma->qp, &wr, &bad_wr);
+
+ error:
+	P9_DPRINTK(P9_DEBUG_ERROR, "EIO\n");
+	return -EIO;
+
+ err_close:
+	spin_lock_irqsave(&rdma->req_lock, flags);
+	if (rdma->state < P9_RDMA_CLOSING) {
+		rdma->state = P9_RDMA_CLOSING;
+		spin_unlock_irqrestore(&rdma->req_lock, flags);
+		rdma_disconnect(rdma->cm_id);
+	} else
+		spin_unlock_irqrestore(&rdma->req_lock, flags);
+	return err;
+}
+
+static void rdma_close(struct p9_client *client)
+{
+	struct p9_trans_rdma *rdma;
+
+	if (!client)
+		return;
+
+	rdma = client->trans;
+	if (!rdma)
+		return;
+
+	client->status = Disconnected;
+	rdma_disconnect(rdma->cm_id);
+	rdma_destroy_trans(rdma);
+}
+
+/**
+ * alloc_rdma - Allocate and initialize the rdma transport structure
+ * @msize: MTU
+ * @dotu: Extension attribute
+ * @opts: Mount options structure
+ */
+static struct p9_trans_rdma *alloc_rdma(struct p9_rdma_opts *opts)
+{
+	struct p9_trans_rdma *rdma;
+
+	rdma = kzalloc(sizeof(struct p9_trans_rdma), GFP_KERNEL);
+	if (!rdma)
+		return NULL;
+
+	rdma->sq_depth = opts->sq_depth;
+	rdma->rq_depth = opts->rq_depth;
+	rdma->timeout = opts->timeout;
+	spin_lock_init(&rdma->req_lock);
+	init_completion(&rdma->cm_done);
+	sema_init(&rdma->sq_sem, rdma->sq_depth);
+	atomic_set(&rdma->rq_count, 0);
+
+	return rdma;
+}
+
+/* its not clear to me we can do anything after send has been posted */
+static int rdma_cancel(struct p9_client *client, struct p9_req_t *req)
+{
+	return 1;
+}
+
+/**
+ * trans_create_rdma - Transport method for creating atransport instance
+ * @client: client instance
+ * @addr: IP address string
+ * @args: Mount options string
+ */
+static int
+rdma_create_trans(struct p9_client *client, const char *addr, char *args)
+{
+	int err;
+	struct p9_rdma_opts opts;
+	struct p9_trans_rdma *rdma;
+	struct rdma_conn_param conn_param;
+	struct ib_qp_init_attr qp_attr;
+	struct ib_device_attr devattr;
+
+	/* Parse the transport specific mount options */
+	err = parse_opts(args, &opts);
+	if (err < 0)
+		return err;
+
+	/* Create and initialize the RDMA transport structure */
+	rdma = alloc_rdma(&opts);
+	if (!rdma)
+		return -ENOMEM;
+
+	/* Create the RDMA CM ID */
+	rdma->cm_id = rdma_create_id(p9_cm_event_handler, client, RDMA_PS_TCP);
+	if (IS_ERR(rdma->cm_id))
+		goto error;
+
+	/* Resolve the server's address */
+	rdma->addr.sin_family = AF_INET;
+	rdma->addr.sin_addr.s_addr = in_aton(addr);
+	rdma->addr.sin_port = htons(opts.port);
+	err = rdma_resolve_addr(rdma->cm_id, NULL,
+				(struct sockaddr *)&rdma->addr,
+				rdma->timeout);
+	if (err)
+		goto error;
+	err = wait_for_completion_interruptible(&rdma->cm_done);
+	if (err || (rdma->state != P9_RDMA_ADDR_RESOLVED))
+		goto error;
+
+	/* Resolve the route to the server */
+	err = rdma_resolve_route(rdma->cm_id, rdma->timeout);
+	if (err)
+		goto error;
+	err = wait_for_completion_interruptible(&rdma->cm_done);
+	if (err || (rdma->state != P9_RDMA_ROUTE_RESOLVED))
+		goto error;
+
+	/* Query the device attributes */
+	err = ib_query_device(rdma->cm_id->device, &devattr);
+	if (err)
+		goto error;
+
+	/* Create the Completion Queue */
+	rdma->cq = ib_create_cq(rdma->cm_id->device, cq_comp_handler,
+				cq_event_handler, client,
+				opts.sq_depth + opts.rq_depth + 1, 0);
+	if (IS_ERR(rdma->cq))
+		goto error;
+	ib_req_notify_cq(rdma->cq, IB_CQ_NEXT_COMP);
+
+	/* Create the Protection Domain */
+	rdma->pd = ib_alloc_pd(rdma->cm_id->device);
+	if (IS_ERR(rdma->pd))
+		goto error;
+
+	/* Cache the DMA lkey in the transport */
+	rdma->dma_mr = NULL;
+	if (devattr.device_cap_flags & IB_DEVICE_LOCAL_DMA_LKEY)
+		rdma->lkey = rdma->cm_id->device->local_dma_lkey;
+	else {
+		rdma->dma_mr = ib_get_dma_mr(rdma->pd, IB_ACCESS_LOCAL_WRITE);
+		if (IS_ERR(rdma->dma_mr))
+			goto error;
+		rdma->lkey = rdma->dma_mr->lkey;
+	}
+
+	/* Create the Queue Pair */
+	memset(&qp_attr, 0, sizeof qp_attr);
+	qp_attr.event_handler = qp_event_handler;
+	qp_attr.qp_context = client;
+	qp_attr.cap.max_send_wr = opts.sq_depth;
+	qp_attr.cap.max_recv_wr = opts.rq_depth;
+	qp_attr.cap.max_send_sge = P9_RDMA_SEND_SGE;
+	qp_attr.cap.max_recv_sge = P9_RDMA_RECV_SGE;
+	qp_attr.sq_sig_type = IB_SIGNAL_REQ_WR;
+	qp_attr.qp_type = IB_QPT_RC;
+	qp_attr.send_cq = rdma->cq;
+	qp_attr.recv_cq = rdma->cq;
+	err = rdma_create_qp(rdma->cm_id, rdma->pd, &qp_attr);
+	if (err)
+		goto error;
+	rdma->qp = rdma->cm_id->qp;
+
+	/* Request a connection */
+	memset(&conn_param, 0, sizeof(conn_param));
+	conn_param.private_data = NULL;
+	conn_param.private_data_len = 0;
+	conn_param.responder_resources = P9_RDMA_IRD;
+	conn_param.initiator_depth = P9_RDMA_ORD;
+	err = rdma_connect(rdma->cm_id, &conn_param);
+	if (err)
+		goto error;
+	err = wait_for_completion_interruptible(&rdma->cm_done);
+	if (err || (rdma->state != P9_RDMA_CONNECTED))
+		goto error;
+
+	client->trans = rdma;
+	client->status = Connected;
+
+	return 0;
+
+error:
+	rdma_destroy_trans(rdma);
+	return -ENOTCONN;
+}
+
+static struct p9_trans_module p9_rdma_trans = {
+	.name = "rdma",
+	.maxsize = P9_RDMA_MAXSIZE,
+	.def = 0,
+	.owner = THIS_MODULE,
+	.create = rdma_create_trans,
+	.close = rdma_close,
+	.request = rdma_request,
+	.cancel = rdma_cancel,
+};
+
+/**
+ * p9_trans_rdma_init - Register the 9P RDMA transport driver
+ */
+static int __init p9_trans_rdma_init(void)
+{
+	v9fs_register_trans(&p9_rdma_trans);
+	return 0;
+}
+
+static void __exit p9_trans_rdma_exit(void)
+{
+	v9fs_unregister_trans(&p9_rdma_trans);
+}
+
+module_init(p9_trans_rdma_init);
+module_exit(p9_trans_rdma_exit);
+
+MODULE_AUTHOR("Tom Tucker <tom@opengridcomputing.com>");
+MODULE_DESCRIPTION("RDMA Transport for 9P");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index 22ba863..6c023f0 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -179,5 +179,5 @@
 
 	dev->features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_HIGHDMA |
 			NETIF_F_GSO_MASK | NETIF_F_NO_CSUM | NETIF_F_LLTX |
-			NETIF_F_NETNS_LOCAL;
+			NETIF_F_NETNS_LOCAL | NETIF_F_GSO;
 }
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 573e20f..0a09ccf 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -347,15 +347,21 @@
 void br_features_recompute(struct net_bridge *br)
 {
 	struct net_bridge_port *p;
-	unsigned long features;
+	unsigned long features, mask;
 
-	features = br->feature_mask;
+	features = mask = br->feature_mask;
+	if (list_empty(&br->port_list))
+		goto done;
+
+	features &= ~NETIF_F_ONE_FOR_ALL;
 
 	list_for_each_entry(p, &br->port_list, list) {
-		features = netdev_compute_features(features, p->dev->features);
+		features = netdev_increment_features(features,
+						     p->dev->features, mask);
 	}
 
-	br->dev->features = features;
+done:
+	br->dev->features = netdev_fix_features(features, NULL);
 }
 
 /* called with RTNL */
diff --git a/net/core/dev.c b/net/core/dev.c
index b8a4fd08..d9038e3 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3947,6 +3947,46 @@
 	__netdev_init_queue_locks_one(dev, &dev->rx_queue, NULL);
 }
 
+unsigned long netdev_fix_features(unsigned long features, const char *name)
+{
+	/* Fix illegal SG+CSUM combinations. */
+	if ((features & NETIF_F_SG) &&
+	    !(features & NETIF_F_ALL_CSUM)) {
+		if (name)
+			printk(KERN_NOTICE "%s: Dropping NETIF_F_SG since no "
+			       "checksum feature.\n", name);
+		features &= ~NETIF_F_SG;
+	}
+
+	/* TSO requires that SG is present as well. */
+	if ((features & NETIF_F_TSO) && !(features & NETIF_F_SG)) {
+		if (name)
+			printk(KERN_NOTICE "%s: Dropping NETIF_F_TSO since no "
+			       "SG feature.\n", name);
+		features &= ~NETIF_F_TSO;
+	}
+
+	if (features & NETIF_F_UFO) {
+		if (!(features & NETIF_F_GEN_CSUM)) {
+			if (name)
+				printk(KERN_ERR "%s: Dropping NETIF_F_UFO "
+				       "since no NETIF_F_HW_CSUM feature.\n",
+				       name);
+			features &= ~NETIF_F_UFO;
+		}
+
+		if (!(features & NETIF_F_SG)) {
+			if (name)
+				printk(KERN_ERR "%s: Dropping NETIF_F_UFO "
+				       "since no NETIF_F_SG feature.\n", name);
+			features &= ~NETIF_F_UFO;
+		}
+	}
+
+	return features;
+}
+EXPORT_SYMBOL(netdev_fix_features);
+
 /**
  *	register_netdevice	- register a network device
  *	@dev: device to register
@@ -4032,36 +4072,7 @@
 		dev->features &= ~(NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM|NETIF_F_HW_CSUM);
 	}
 
-
-	/* Fix illegal SG+CSUM combinations. */
-	if ((dev->features & NETIF_F_SG) &&
-	    !(dev->features & NETIF_F_ALL_CSUM)) {
-		printk(KERN_NOTICE "%s: Dropping NETIF_F_SG since no checksum feature.\n",
-		       dev->name);
-		dev->features &= ~NETIF_F_SG;
-	}
-
-	/* TSO requires that SG is present as well. */
-	if ((dev->features & NETIF_F_TSO) &&
-	    !(dev->features & NETIF_F_SG)) {
-		printk(KERN_NOTICE "%s: Dropping NETIF_F_TSO since no SG feature.\n",
-		       dev->name);
-		dev->features &= ~NETIF_F_TSO;
-	}
-	if (dev->features & NETIF_F_UFO) {
-		if (!(dev->features & NETIF_F_HW_CSUM)) {
-			printk(KERN_ERR "%s: Dropping NETIF_F_UFO since no "
-					"NETIF_F_HW_CSUM feature.\n",
-							dev->name);
-			dev->features &= ~NETIF_F_UFO;
-		}
-		if (!(dev->features & NETIF_F_SG)) {
-			printk(KERN_ERR "%s: Dropping NETIF_F_UFO since no "
-					"NETIF_F_SG feature.\n",
-					dev->name);
-			dev->features &= ~NETIF_F_UFO;
-		}
-	}
+	dev->features = netdev_fix_features(dev->features, dev->name);
 
 	/* Enable software GSO if SG is supported. */
 	if (dev->features & NETIF_F_SG)
@@ -4700,49 +4711,45 @@
 #endif /* CONFIG_NET_DMA */
 
 /**
- *	netdev_compute_feature - compute conjunction of two feature sets
- *	@all: first feature set
- *	@one: second feature set
+ *	netdev_increment_features - increment feature set by one
+ *	@all: current feature set
+ *	@one: new feature set
+ *	@mask: mask feature set
  *
  *	Computes a new feature set after adding a device with feature set
- *	@one to the master device with current feature set @all.  Returns
- *	the new feature set.
+ *	@one to the master device with current feature set @all.  Will not
+ *	enable anything that is off in @mask. Returns the new feature set.
  */
-int netdev_compute_features(unsigned long all, unsigned long one)
+unsigned long netdev_increment_features(unsigned long all, unsigned long one,
+					unsigned long mask)
 {
-	/* if device needs checksumming, downgrade to hw checksumming */
-	if (all & NETIF_F_NO_CSUM && !(one & NETIF_F_NO_CSUM))
-		all ^= NETIF_F_NO_CSUM | NETIF_F_HW_CSUM;
+	/* If device needs checksumming, downgrade to it. */
+        if (all & NETIF_F_NO_CSUM && !(one & NETIF_F_NO_CSUM))
+		all ^= NETIF_F_NO_CSUM | (one & NETIF_F_ALL_CSUM);
+	else if (mask & NETIF_F_ALL_CSUM) {
+		/* If one device supports v4/v6 checksumming, set for all. */
+		if (one & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM) &&
+		    !(all & NETIF_F_GEN_CSUM)) {
+			all &= ~NETIF_F_ALL_CSUM;
+			all |= one & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
+		}
 
-	/* if device can't do all checksum, downgrade to ipv4/ipv6 */
-	if (all & NETIF_F_HW_CSUM && !(one & NETIF_F_HW_CSUM))
-		all ^= NETIF_F_HW_CSUM
-			| NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+		/* If one device supports hw checksumming, set for all. */
+		if (one & NETIF_F_GEN_CSUM && !(all & NETIF_F_GEN_CSUM)) {
+			all &= ~NETIF_F_ALL_CSUM;
+			all |= NETIF_F_HW_CSUM;
+		}
+	}
 
-	if (one & NETIF_F_GSO)
-		one |= NETIF_F_GSO_SOFTWARE;
-	one |= NETIF_F_GSO;
+	one |= NETIF_F_ALL_CSUM;
 
-	/*
-	 * If even one device supports a GSO protocol with software fallback,
-	 * enable it for all.
-	 */
-	all |= one & NETIF_F_GSO_SOFTWARE;
-
-	/* If even one device supports robust GSO, enable it for all. */
-	if (one & NETIF_F_GSO_ROBUST)
-		all |= NETIF_F_GSO_ROBUST;
-
-	all &= one | NETIF_F_LLTX;
-
-	if (!(all & NETIF_F_ALL_CSUM))
-		all &= ~NETIF_F_SG;
-	if (!(all & NETIF_F_SG))
-		all &= ~NETIF_F_GSO_MASK;
+	one |= all & NETIF_F_ONE_FOR_ALL;
+	all &= one | NETIF_F_LLTX | NETIF_F_GSO;
+	all |= one & mask & NETIF_F_ONE_FOR_ALL;
 
 	return all;
 }
-EXPORT_SYMBOL(netdev_compute_features);
+EXPORT_SYMBOL(netdev_increment_features);
 
 static struct hlist_head *netdev_create_hash(void)
 {
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 990a584..ba85d88 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -362,6 +362,17 @@
 	__u32 tsval, tsecr;	/* need to include OPTION_TS */
 };
 
+/* Beware: Something in the Internet is very sensitive to the ordering of
+ * TCP options, we learned this through the hard way, so be careful here.
+ * Luckily we can at least blame others for their non-compliance but from
+ * inter-operatibility perspective it seems that we're somewhat stuck with
+ * the ordering which we have been using if we want to keep working with
+ * those broken things (not that it currently hurts anybody as there isn't
+ * particular reason why the ordering would need to be changed).
+ *
+ * At least SACK_PERM as the first option is known to lead to a disaster
+ * (but it may well be that other scenarios fail similarly).
+ */
 static void tcp_options_write(__be32 *ptr, struct tcp_sock *tp,
 			      const struct tcp_out_options *opts,
 			      __u8 **md5_hash) {
@@ -376,6 +387,12 @@
 		*md5_hash = NULL;
 	}
 
+	if (unlikely(opts->mss)) {
+		*ptr++ = htonl((TCPOPT_MSS << 24) |
+			       (TCPOLEN_MSS << 16) |
+			       opts->mss);
+	}
+
 	if (likely(OPTION_TS & opts->options)) {
 		if (unlikely(OPTION_SACK_ADVERTISE & opts->options)) {
 			*ptr++ = htonl((TCPOPT_SACK_PERM << 24) |
@@ -392,12 +409,6 @@
 		*ptr++ = htonl(opts->tsecr);
 	}
 
-	if (unlikely(opts->mss)) {
-		*ptr++ = htonl((TCPOPT_MSS << 24) |
-			       (TCPOLEN_MSS << 16) |
-			       opts->mss);
-	}
-
 	if (unlikely(OPTION_SACK_ADVERTISE & opts->options &&
 		     !(OPTION_TS & opts->options))) {
 		*ptr++ = htonl((TCPOPT_NOP << 24) |
@@ -432,7 +443,7 @@
 
 		if (tp->rx_opt.dsack) {
 			tp->rx_opt.dsack = 0;
-			tp->rx_opt.eff_sacks--;
+			tp->rx_opt.eff_sacks = tp->rx_opt.num_sacks;
 		}
 	}
 }
@@ -2268,6 +2279,11 @@
 	}
 
 	memset(&opts, 0, sizeof(opts));
+#ifdef CONFIG_SYN_COOKIES
+	if (unlikely(req->cookie_ts))
+		TCP_SKB_CB(skb)->when = cookie_init_timestamp(req);
+	else
+#endif
 	TCP_SKB_CB(skb)->when = tcp_time_stamp;
 	tcp_header_size = tcp_synack_options(sk, req, mss,
 					     skb, &opts, &md5) +
@@ -2293,11 +2309,6 @@
 
 	/* RFC1323: The window in SYN & SYN/ACK segments is never scaled. */
 	th->window = htons(min(req->rcv_wnd, 65535U));
-#ifdef CONFIG_SYN_COOKIES
-	if (unlikely(req->cookie_ts))
-		TCP_SKB_CB(skb)->when = cookie_init_timestamp(req);
-	else
-#endif
 	tcp_options_write((__be32 *)(th + 1), tp, &opts, &md5_hash_location);
 	th->doff = (tcp_header_size >> 2);
 	TCP_INC_STATS(sock_net(sk), TCP_MIB_OUTSEGS);
diff --git a/net/phonet/af_phonet.c b/net/phonet/af_phonet.c
index b9d97ef..defeb7a 100644
--- a/net/phonet/af_phonet.c
+++ b/net/phonet/af_phonet.c
@@ -261,6 +261,8 @@
 		return 0; /* we are not the destination */
 	if (ph->pn_res == PN_PREFIX && !pskb_may_pull(skb, 5))
 		return 0;
+	if (ph->pn_res == PN_COMMGR) /* indications */
+		return 0;
 
 	ph = pn_hdr(skb); /* re-acquires the pointer */
 	pm = pn_msg(skb);
@@ -309,7 +311,8 @@
 
 	return pn_raw_send(data, sizeof(data), rskb->dev,
 				pn_object(oph->pn_sdev, 0x00),
-				pn_object(oph->pn_rdev, oph->pn_robj), 0x10);
+				pn_object(oph->pn_rdev, oph->pn_robj),
+				PN_COMMGR);
 }
 
 
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index 8b06fa9..03e389e 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -545,9 +545,10 @@
 			expires = ktime_set(0, 0);
 			expires = ktime_add_ns(expires, PSCHED_US2NS(sched));
 			if (hrtimer_try_to_cancel(&q->delay_timer) &&
-			    ktime_to_ns(ktime_sub(q->delay_timer.expires,
-						  expires)) > 0)
-				q->delay_timer.expires = expires;
+			    ktime_to_ns(ktime_sub(
+					hrtimer_get_expires(&q->delay_timer),
+					expires)) > 0)
+				hrtimer_set_expires(&q->delay_timer, expires);
 			hrtimer_restart(&q->delay_timer);
 			cl->delayed = 1;
 			cl->xstats.overactions++;
diff --git a/net/sctp/input.c b/net/sctp/input.c
index a49fa80..bf612d9 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -369,7 +369,7 @@
 void sctp_icmp_frag_needed(struct sock *sk, struct sctp_association *asoc,
 			   struct sctp_transport *t, __u32 pmtu)
 {
-	if (!t || (t->pathmtu == pmtu))
+	if (!t || (t->pathmtu <= pmtu))
 		return;
 
 	if (sock_owned_by_user(sk)) {
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index d4c3fbc..a6a0ea7 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -2544,6 +2544,7 @@
 	sctp_shutdownhdr_t *sdh;
 	sctp_disposition_t disposition;
 	struct sctp_ulpevent *ev;
+	__u32 ctsn;
 
 	if (!sctp_vtag_verify(chunk, asoc))
 		return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
@@ -2558,6 +2559,14 @@
 	sdh = (sctp_shutdownhdr_t *)chunk->skb->data;
 	skb_pull(chunk->skb, sizeof(sctp_shutdownhdr_t));
 	chunk->subh.shutdown_hdr = sdh;
+	ctsn = ntohl(sdh->cum_tsn_ack);
+
+	/* If Cumulative TSN Ack beyond the max tsn currently
+	 * send, terminating the association and respond to the
+	 * sender with an ABORT.
+	 */
+	if (!TSN_lt(ctsn, asoc->next_tsn))
+		return sctp_sf_violation_ctsn(ep, asoc, type, arg, commands);
 
 	/* API 5.3.1.5 SCTP_SHUTDOWN_EVENT
 	 * When a peer sends a SHUTDOWN, SCTP delivers this notification to
@@ -2599,6 +2608,51 @@
 	return disposition;
 }
 
+/*
+ * sctp_sf_do_9_2_shut_ctsn
+ *
+ * Once an endpoint has reached the SHUTDOWN-RECEIVED state,
+ * it MUST NOT send a SHUTDOWN in response to a ULP request.
+ * The Cumulative TSN Ack of the received SHUTDOWN chunk
+ * MUST be processed.
+ */
+sctp_disposition_t sctp_sf_do_9_2_shut_ctsn(const struct sctp_endpoint *ep,
+					   const struct sctp_association *asoc,
+					   const sctp_subtype_t type,
+					   void *arg,
+					   sctp_cmd_seq_t *commands)
+{
+	struct sctp_chunk *chunk = arg;
+	sctp_shutdownhdr_t *sdh;
+
+	if (!sctp_vtag_verify(chunk, asoc))
+		return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
+
+	/* Make sure that the SHUTDOWN chunk has a valid length. */
+	if (!sctp_chunk_length_valid(chunk,
+				      sizeof(struct sctp_shutdown_chunk_t)))
+		return sctp_sf_violation_chunklen(ep, asoc, type, arg,
+						  commands);
+
+	sdh = (sctp_shutdownhdr_t *)chunk->skb->data;
+
+	/* If Cumulative TSN Ack beyond the max tsn currently
+	 * send, terminating the association and respond to the
+	 * sender with an ABORT.
+	 */
+	if (!TSN_lt(ntohl(sdh->cum_tsn_ack), asoc->next_tsn))
+		return sctp_sf_violation_ctsn(ep, asoc, type, arg, commands);
+
+	/* verify, by checking the Cumulative TSN Ack field of the
+	 * chunk, that all its outstanding DATA chunks have been
+	 * received by the SHUTDOWN sender.
+	 */
+	sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_CTSN,
+			SCTP_BE32(sdh->cum_tsn_ack));
+
+	return SCTP_DISPOSITION_CONSUME;
+}
+
 /* RFC 2960 9.2
  * If an endpoint is in SHUTDOWN-ACK-SENT state and receives an INIT chunk
  * (e.g., if the SHUTDOWN COMPLETE was lost) with source and destination
diff --git a/net/sctp/sm_statetable.c b/net/sctp/sm_statetable.c
index dd4ddc4..5c8186d 100644
--- a/net/sctp/sm_statetable.c
+++ b/net/sctp/sm_statetable.c
@@ -266,11 +266,11 @@
 	/* SCTP_STATE_ESTABLISHED */ \
 	TYPE_SCTP_FUNC(sctp_sf_do_9_2_shutdown), \
 	/* SCTP_STATE_SHUTDOWN_PENDING */ \
-	TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
+	TYPE_SCTP_FUNC(sctp_sf_do_9_2_shutdown), \
 	/* SCTP_STATE_SHUTDOWN_SENT */ \
 	TYPE_SCTP_FUNC(sctp_sf_do_9_2_shutdown_ack), \
 	/* SCTP_STATE_SHUTDOWN_RECEIVED */ \
-	TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
+	TYPE_SCTP_FUNC(sctp_sf_do_9_2_shut_ctsn), \
 	/* SCTP_STATE_SHUTDOWN_ACK_SENT */ \
 	TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
 } /* TYPE_SCTP_SHUTDOWN */
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index c647aab..dc504d3 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -711,28 +711,30 @@
 				    int type, unsigned hash, int *error)
 {
 	struct sock *u;
-	struct nameidata nd;
+	struct path path;
 	int err = 0;
 
 	if (sunname->sun_path[0]) {
-		err = path_lookup(sunname->sun_path, LOOKUP_FOLLOW, &nd);
+		struct inode *inode;
+		err = kern_path(sunname->sun_path, LOOKUP_FOLLOW, &path);
 		if (err)
 			goto fail;
-		err = vfs_permission(&nd, MAY_WRITE);
+		inode = path.dentry->d_inode;
+		err = inode_permission(inode, MAY_WRITE);
 		if (err)
 			goto put_fail;
 
 		err = -ECONNREFUSED;
-		if (!S_ISSOCK(nd.path.dentry->d_inode->i_mode))
+		if (!S_ISSOCK(inode->i_mode))
 			goto put_fail;
-		u = unix_find_socket_byinode(net, nd.path.dentry->d_inode);
+		u = unix_find_socket_byinode(net, inode);
 		if (!u)
 			goto put_fail;
 
 		if (u->sk_type == type)
-			touch_atime(nd.path.mnt, nd.path.dentry);
+			touch_atime(path.mnt, path.dentry);
 
-		path_put(&nd.path);
+		path_put(&path);
 
 		err=-EPROTOTYPE;
 		if (u->sk_type != type) {
@@ -753,7 +755,7 @@
 	return u;
 
 put_fail:
-	path_put(&nd.path);
+	path_put(&path);
 fail:
 	*error=err;
 	return NULL;
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index 7d82be0..646c712 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -16,7 +16,7 @@
 
 config WIRELESS_OLD_REGULATORY
 	bool "Old wireless static regulatory definitions"
-	default n
+	default y
 	---help---
 	  This option enables the old static regulatory information
 	  and uses it within the new framework. This is available
@@ -40,11 +40,10 @@
 	  ieee80211_regdom module parameter. This is being phased out and you
 	  should stop using them ASAP.
 
-	  Say N unless you cannot install a new userspace application
-	  or have one currently depending on the ieee80211_regdom module
-	  parameter and cannot port it to use the new userspace interfaces.
-
-	  This is scheduled for removal for 2.6.29.
+	  Say Y unless you have installed a new userspace application.
+	  Also say Y if have one currently depending on the ieee80211_regdom
+	  module parameter and cannot port it to use the new userspace
+	  interfaces.
 
 config WIRELESS_EXT
 	bool "Wireless extensions"
diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
index f7e8e93..14ee68e 100755
--- a/scripts/checkstack.pl
+++ b/scripts/checkstack.pl
@@ -14,6 +14,7 @@
 #	M68k port by Geert Uytterhoeven and Andreas Schwab
 #	AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
 #	PARISC port by Kyle McMartin <kyle@parisc-linux.org>
+#	sparc port by Martin Habets <errandir_news@mph.eclipse.co.uk>
 #
 #	Usage:
 #	objdump -d vmlinux | scripts/checkstack.pl [arch]
@@ -94,6 +95,9 @@
 	} elsif ($arch =~ /^blackfin$/) {
 		#   0:   00 e8 38 01     LINK 0x4e0;
 		$re = qr/.*[[:space:]]LINK[[:space:]]*(0x$x{1,8})/o;
+	} elsif ($arch eq 'sparc' || $arch eq 'sparc64') {
+		# f0019d10:       9d e3 bf 90     save  %sp, -112, %sp
+		$re = qr/.*save.*%sp, -(([0-9]{2}|[3-9])[0-9]{2}), %sp/o;
 	} else {
 		print("wrong or unknown architecture \"$arch\"\n");
 		exit
diff --git a/scripts/checksyscalls.sh b/scripts/checksyscalls.sh
index 366f8c7..41564b1 100755
--- a/scripts/checksyscalls.sh
+++ b/scripts/checksyscalls.sh
@@ -119,5 +119,5 @@
 \#endif/p }' $1
 }
 
-(ignore_list && syscall_list ${srctree}/include/asm-x86/unistd_32.h) | \
+(ignore_list && syscall_list ${srctree}/arch/x86/include/asm/unistd_32.h) | \
 $* -E -x c - > /dev/null
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index fa1a7d5..fa8c2dd 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -4,7 +4,11 @@
 
 PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
 
+ifdef KBUILD_KCONFIG
+Kconfig := $(KBUILD_KCONFIG)
+else
 Kconfig := arch/$(SRCARCH)/Kconfig
+endif
 
 xconfig: $(obj)/qconf
 	$< $(Kconfig)
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index b91cf24..830d9ea 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -852,8 +852,7 @@
 
 	}
 
-	if (modules_sym)
-		sym_calc_value(modules_sym);
+	sym_clear_all_valid();
 
 	if (mode != def_random)
 		return;
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 44ee94d..a53e2fc 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1648,7 +1648,7 @@
     $prototype =~ s/^noinline +//;
     $prototype =~ s/__devinit +//;
     $prototype =~ s/__init +//;
-    $prototype =~ s/^#define\s+//; #ak added
+    $prototype =~ s/^#\s*define\s+//; #ak added
     $prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//;
 
     # Yes, this truly is vile.  We are looking for:
@@ -1764,13 +1764,13 @@
 
     $x =~ s@\/\/.*$@@gos; # strip C99-style comments to end of line
 
-    if ($x =~ m#\s*/\*\s+MACDOC\s*#io || ($x =~ /^#/ && $x !~ /^#define/)) {
+    if ($x =~ m#\s*/\*\s+MACDOC\s*#io || ($x =~ /^#/ && $x !~ /^#\s*define/)) {
 	# do nothing
     }
     elsif ($x =~ /([^\{]*)/) {
 	$prototype .= $1;
     }
-    if (($x =~ /\{/) || ($x =~ /\#define/) || ($x =~ /;/)) {
+    if (($x =~ /\{/) || ($x =~ /\#\s*define/) || ($x =~ /;/)) {
 	$prototype =~ s@/\*.*?\*/@@gos;	# strip comments.
 	$prototype =~ s@[\r\n]+@ @gos; # strip newlines/cr's.
 	$prototype =~ s@^\s+@@gos; # strip leading spaces
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index 1af62b8..e178366 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -2283,7 +2283,7 @@
 	int idx, err;
 	struct snd_pcm_oss_file *pcm_oss_file;
 	struct snd_pcm_substream *substream;
-	unsigned int f_mode = file->f_mode;
+	fmode_t f_mode = file->f_mode;
 
 	if (rpcm_oss_file)
 		*rpcm_oss_file = NULL;
diff --git a/sound/drivers/pcsp/pcsp_lib.c b/sound/drivers/pcsp/pcsp_lib.c
index e341f3f..1f42e40 100644
--- a/sound/drivers/pcsp/pcsp_lib.c
+++ b/sound/drivers/pcsp/pcsp_lib.c
@@ -34,7 +34,7 @@
 		chip->thalf = 0;
 		if (!atomic_read(&chip->timer_active))
 			return HRTIMER_NORESTART;
-		hrtimer_forward(&chip->timer, chip->timer.expires,
+		hrtimer_forward(&chip->timer, hrtimer_get_expires(&chip->timer),
 				ktime_set(0, chip->ns_rem));
 		return HRTIMER_RESTART;
 	}
@@ -118,7 +118,8 @@
 	chip->ns_rem = PCSP_PERIOD_NS();
 	ns = (chip->thalf ? PCSP_CALC_NS(timer_cnt) : chip->ns_rem);
 	chip->ns_rem -= ns;
-	hrtimer_forward(&chip->timer, chip->timer.expires, ktime_set(0, ns));
+	hrtimer_forward(&chip->timer, hrtimer_get_expires(&chip->timer),
+							ktime_set(0, ns));
 	return HRTIMER_RESTART;
 
 exit_nr_unlock2:
diff --git a/sound/oss/au1550_ac97.c b/sound/oss/au1550_ac97.c
index 23018a7..81e1f44 100644
--- a/sound/oss/au1550_ac97.c
+++ b/sound/oss/au1550_ac97.c
@@ -93,7 +93,7 @@
 	spinlock_t      lock;
 	struct mutex open_mutex;
 	struct mutex sem;
-	mode_t          open_mode;
+	fmode_t          open_mode;
 	wait_queue_head_t open_wait;
 
 	struct dmabuf {
diff --git a/sound/oss/dmasound/dmasound.h b/sound/oss/dmasound/dmasound.h
index d978b00..1cb13fe 100644
--- a/sound/oss/dmasound/dmasound.h
+++ b/sound/oss/dmasound/dmasound.h
@@ -129,7 +129,7 @@
     int (*mixer_ioctl)(u_int, u_long);	/* optional */
     int (*write_sq_setup)(void);	/* optional */
     int (*read_sq_setup)(void);		/* optional */
-    int (*sq_open)(mode_t);		/* optional */
+    int (*sq_open)(fmode_t);		/* optional */
     int (*state_info)(char *, size_t);	/* optional */
     void (*abort_read)(void);		/* optional */
     int min_dsp_speed;
@@ -235,7 +235,7 @@
      */
     int active;
     wait_queue_head_t action_queue, open_queue, sync_queue;
-    int open_mode;
+    fmode_t open_mode;
     int busy, syncing, xruns, died;
 };
 
diff --git a/sound/oss/dmasound/dmasound_atari.c b/sound/oss/dmasound/dmasound_atari.c
index 285239d..4d45bd6 100644
--- a/sound/oss/dmasound/dmasound_atari.c
+++ b/sound/oss/dmasound/dmasound_atari.c
@@ -143,7 +143,7 @@
 static int TTMixerIoctl(u_int cmd, u_long arg);
 static int FalconMixerIoctl(u_int cmd, u_long arg);
 static int AtaWriteSqSetup(void);
-static int AtaSqOpen(mode_t mode);
+static int AtaSqOpen(fmode_t mode);
 static int TTStateInfo(char *buffer, size_t space);
 static int FalconStateInfo(char *buffer, size_t space);
 
@@ -1461,7 +1461,7 @@
 	return 0 ;
 }
 
-static int AtaSqOpen(mode_t mode)
+static int AtaSqOpen(fmode_t mode)
 {
 	write_sq_ignore_int = 1;
 	return 0 ;
diff --git a/sound/oss/dmasound/dmasound_core.c b/sound/oss/dmasound/dmasound_core.c
index 95fc5c6..b8239f3 100644
--- a/sound/oss/dmasound/dmasound_core.c
+++ b/sound/oss/dmasound/dmasound_core.c
@@ -212,7 +212,7 @@
 #endif /* MODULE */
 
 /* control over who can modify resources shared between play/record */
-static mode_t shared_resource_owner;
+static fmode_t shared_resource_owner;
 static int shared_resources_initialised;
 
     /*
@@ -668,7 +668,7 @@
 
 #if 0 /* blocking open() */
 static inline void sq_wake_up(struct sound_queue *sq, struct file *file,
-			      mode_t mode)
+			      fmode_t mode)
 {
 	if (file->f_mode & mode) {
 		sq->busy = 0; /* CHECK: IS THIS OK??? */
@@ -677,7 +677,7 @@
 }
 #endif
 
-static int sq_open2(struct sound_queue *sq, struct file *file, mode_t mode,
+static int sq_open2(struct sound_queue *sq, struct file *file, fmode_t mode,
 		    int numbufs, int bufsize)
 {
 	int rc = 0;
@@ -891,10 +891,10 @@
    is the owner - if we have problems.
 */
 
-static int shared_resources_are_mine(mode_t md)
+static int shared_resources_are_mine(fmode_t md)
 {
 	if (shared_resource_owner)
-		return (shared_resource_owner & md ) ;
+		return (shared_resource_owner & md) != 0;
 	else {
 		shared_resource_owner = md ;
 		return 1 ;
diff --git a/sound/oss/msnd.h b/sound/oss/msnd.h
index 61b3955..c8be47e 100644
--- a/sound/oss/msnd.h
+++ b/sound/oss/msnd.h
@@ -211,7 +211,7 @@
 
 	/* State variables */
 	enum { msndClassic, msndPinnacle } type;
-	mode_t mode;
+	fmode_t mode;
 	unsigned long flags;
 #define F_RESETTING			0
 #define F_HAVEDIGITAL			1
diff --git a/sound/oss/sound_config.h b/sound/oss/sound_config.h
index 1a00a32..55271fb 100644
--- a/sound/oss/sound_config.h
+++ b/sound/oss/sound_config.h
@@ -110,24 +110,16 @@
 #define OPEN_WRITE	PCM_ENABLE_OUTPUT
 #define OPEN_READWRITE	(OPEN_READ|OPEN_WRITE)
 
-#if OPEN_READ == FMODE_READ && OPEN_WRITE == FMODE_WRITE
-
 static inline int translate_mode(struct file *file)
 {
-	return file->f_mode;
+	if (OPEN_READ == (__force int)FMODE_READ &&
+	    OPEN_WRITE == (__force int)FMODE_WRITE)
+		return (__force int)(file->f_mode & (FMODE_READ | FMODE_WRITE));
+	else
+		return ((file->f_mode & FMODE_READ) ? OPEN_READ : 0) |
+			((file->f_mode & FMODE_WRITE) ? OPEN_WRITE : 0);
 }
 
-#else
-
-static inline int translate_mode(struct file *file)
-{
-	return ((file->f_mode & FMODE_READ) ? OPEN_READ : 0) |
-		((file->f_mode & FMODE_WRITE) ? OPEN_WRITE : 0);
-}
-
-#endif
-
-
 #include "sound_calls.h"
 #include "dev_table.h"
 
diff --git a/sound/oss/swarm_cs4297a.c b/sound/oss/swarm_cs4297a.c
index 044453a..41562ec 100644
--- a/sound/oss/swarm_cs4297a.c
+++ b/sound/oss/swarm_cs4297a.c
@@ -295,7 +295,7 @@
 	struct mutex open_mutex;
 	struct mutex open_sem_adc;
 	struct mutex open_sem_dac;
-	mode_t open_mode;
+	fmode_t open_mode;
 	wait_queue_head_t open_wait;
 	wait_queue_head_t open_wait_adc;
 	wait_queue_head_t open_wait_dac;
diff --git a/sound/oss/vwsnd.c b/sound/oss/vwsnd.c
index dcbb3f7..78b8acc 100644
--- a/sound/oss/vwsnd.c
+++ b/sound/oss/vwsnd.c
@@ -1509,7 +1509,7 @@
 	struct mutex open_mutex;
 	struct mutex io_mutex;
 	struct mutex mix_mutex;
-	mode_t		open_mode;
+	fmode_t		open_mode;
 	wait_queue_head_t open_wait;
 
 	lithium_t	lith;