| /* SPDX-License-Identifier: GPL-2.0 */ |
| |
| #include "req-gen/_begin.h" |
| |
| /* |
| * Based on the document "getPerfCountInfo v1.07" |
| */ |
| |
| /* |
| * #define REQUEST_NAME counter_request_name |
| * #define REQUEST_NUM r_num |
| * #define REQUEST_IDX_KIND starting_index_kind |
| * #include I(REQUEST_BEGIN) |
| * REQUEST( |
| * __field(...) |
| * __field(...) |
| * __array(...) |
| * __count(...) |
| * ) |
| * #include I(REQUEST_END) |
| * |
| * - starting_index_kind is one of the following, depending on the event: |
| * |
| * hw_chip_id: hardware chip id or -1 for current hw chip |
| * partition_id |
| * sibling_part_id, |
| * phys_processor_idx: |
| * 0xffffffffffffffff: or -1, which means it is irrelavant for the event |
| * |
| * __count(offset, bytes, name): |
| * a counter that should be exposed via perf |
| * __field(offset, bytes, name) |
| * a normal field |
| * __array(offset, bytes, name) |
| * an array of bytes |
| * |
| * |
| * @bytes for __count, and __field _must_ be a numeral token |
| * in decimal, not an expression and not in hex. |
| * |
| * |
| * TODO: |
| * - expose secondary index (if any counter ever uses it, only 0xA0 |
| * appears to use it right now, and it doesn't have any counters) |
| * - embed versioning info |
| * - include counter descriptions |
| */ |
| #define REQUEST_NAME dispatch_timebase_by_processor |
| #define REQUEST_NUM 0x10 |
| #define REQUEST_IDX_KIND "phys_processor_idx=?" |
| #include I(REQUEST_BEGIN) |
| REQUEST(__count(0, 8, processor_time_in_timebase_cycles) |
| __field(0x8, 4, hw_processor_id) |
| __field(0xC, 2, owning_part_id) |
| __field(0xE, 1, processor_state) |
| __field(0xF, 1, version) |
| __field(0x10, 4, hw_chip_id) |
| __field(0x14, 4, phys_module_id) |
| __field(0x18, 4, primary_affinity_domain_idx) |
| __field(0x1C, 4, secondary_affinity_domain_idx) |
| __field(0x20, 4, processor_version) |
| __field(0x24, 2, logical_processor_idx) |
| __field(0x26, 2, reserved) |
| __field(0x28, 4, processor_id_register) |
| __field(0x2C, 4, phys_processor_idx) |
| ) |
| #include I(REQUEST_END) |
| |
| #define REQUEST_NAME entitled_capped_uncapped_donated_idle_timebase_by_partition |
| #define REQUEST_NUM 0x20 |
| #define REQUEST_IDX_KIND "sibling_part_id=?" |
| #include I(REQUEST_BEGIN) |
| REQUEST(__field(0, 8, partition_id) |
| __count(0x8, 8, entitled_cycles) |
| __count(0x10, 8, consumed_capped_cycles) |
| __count(0x18, 8, consumed_uncapped_cycles) |
| __count(0x20, 8, cycles_donated) |
| __count(0x28, 8, purr_idle_cycles) |
| ) |
| #include I(REQUEST_END) |
| |
| /* |
| * Not available for counter_info_version >= 0x8, use |
| * run_instruction_cycles_by_partition(0x100) instead. |
| */ |
| #define REQUEST_NAME run_instructions_run_cycles_by_partition |
| #define REQUEST_NUM 0x30 |
| #define REQUEST_IDX_KIND "sibling_part_id=?" |
| #include I(REQUEST_BEGIN) |
| REQUEST(__field(0, 8, partition_id) |
| __count(0x8, 8, instructions_completed) |
| __count(0x10, 8, cycles) |
| ) |
| #include I(REQUEST_END) |
| |
| #define REQUEST_NAME system_performance_capabilities |
| #define REQUEST_NUM 0x40 |
| #define REQUEST_IDX_KIND "starting_index=0xffffffff" |
| #include I(REQUEST_BEGIN) |
| REQUEST(__field(0, 1, perf_collect_privileged) |
| __field(0x1, 1, capability_mask) |
| __array(0x2, 0xE, reserved) |
| ) |
| #include I(REQUEST_END) |
| |
| #define REQUEST_NAME processor_bus_utilization_abc_links |
| #define REQUEST_NUM 0x50 |
| #define REQUEST_IDX_KIND "hw_chip_id=?" |
| #include I(REQUEST_BEGIN) |
| REQUEST(__field(0, 4, hw_chip_id) |
| __array(0x4, 0xC, reserved1) |
| __count(0x10, 8, total_link_cycles) |
| __count(0x18, 8, idle_cycles_for_a_link) |
| __count(0x20, 8, idle_cycles_for_b_link) |
| __count(0x28, 8, idle_cycles_for_c_link) |
| __array(0x30, 0x20, reserved2) |
| ) |
| #include I(REQUEST_END) |
| |
| #define REQUEST_NAME processor_bus_utilization_wxyz_links |
| #define REQUEST_NUM 0x60 |
| #define REQUEST_IDX_KIND "hw_chip_id=?" |
| #include I(REQUEST_BEGIN) |
| REQUEST(__field(0, 4, hw_chip_id) |
| __array(0x4, 0xC, reserved1) |
| __count(0x10, 8, total_link_cycles) |
| __count(0x18, 8, idle_cycles_for_w_link) |
| __count(0x20, 8, idle_cycles_for_x_link) |
| __count(0x28, 8, idle_cycles_for_y_link) |
| __count(0x30, 8, idle_cycles_for_z_link) |
| __array(0x38, 0x28, reserved2) |
| ) |
| #include I(REQUEST_END) |
| |
| #define REQUEST_NAME processor_bus_utilization_gx_links |
| #define REQUEST_NUM 0x70 |
| #define REQUEST_IDX_KIND "hw_chip_id=?" |
| #include I(REQUEST_BEGIN) |
| REQUEST(__field(0, 4, hw_chip_id) |
| __array(0x4, 0xC, reserved1) |
| __count(0x10, 8, gx0_in_address_cycles) |
| __count(0x18, 8, gx0_in_data_cycles) |
| __count(0x20, 8, gx0_in_retries) |
| __count(0x28, 8, gx0_in_bus_cycles) |
| __count(0x30, 8, gx0_in_cycles_total) |
| __count(0x38, 8, gx0_out_address_cycles) |
| __count(0x40, 8, gx0_out_data_cycles) |
| __count(0x48, 8, gx0_out_retries) |
| __count(0x50, 8, gx0_out_bus_cycles) |
| __count(0x58, 8, gx0_out_cycles_total) |
| __count(0x60, 8, gx1_in_address_cycles) |
| __count(0x68, 8, gx1_in_data_cycles) |
| __count(0x70, 8, gx1_in_retries) |
| __count(0x78, 8, gx1_in_bus_cycles) |
| __count(0x80, 8, gx1_in_cycles_total) |
| __count(0x88, 8, gx1_out_address_cycles) |
| __count(0x90, 8, gx1_out_data_cycles) |
| __count(0x98, 8, gx1_out_retries) |
| __count(0xA0, 8, gx1_out_bus_cycles) |
| __count(0xA8, 8, gx1_out_cycles_total) |
| ) |
| #include I(REQUEST_END) |
| |
| #define REQUEST_NAME processor_bus_utilization_mc_links |
| #define REQUEST_NUM 0x80 |
| #define REQUEST_IDX_KIND "hw_chip_id=?" |
| #include I(REQUEST_BEGIN) |
| REQUEST(__field(0, 4, hw_chip_id) |
| __array(0x4, 0xC, reserved1) |
| __count(0x10, 8, mc0_frames) |
| __count(0x18, 8, mc0_reads) |
| __count(0x20, 8, mc0_write) |
| __count(0x28, 8, mc0_total_cycles) |
| __count(0x30, 8, mc1_frames) |
| __count(0x38, 8, mc1_reads) |
| __count(0x40, 8, mc1_writes) |
| __count(0x48, 8, mc1_total_cycles) |
| ) |
| #include I(REQUEST_END) |
| |
| /* Processor_config (0x90) skipped, no counters */ |
| /* Current_processor_frequency (0x91) skipped, no counters */ |
| |
| #define REQUEST_NAME processor_core_utilization |
| #define REQUEST_NUM 0x94 |
| #define REQUEST_IDX_KIND "phys_processor_idx=?" |
| #include I(REQUEST_BEGIN) |
| REQUEST(__field(0, 4, phys_processor_idx) |
| __field(0x4, 4, hw_processor_id) |
| __count(0x8, 8, cycles_across_any_thread) |
| __count(0x10, 8, timebase_at_collection) |
| __count(0x18, 8, purr_cycles) |
| __count(0x20, 8, sum_of_cycles_across_all_threads) |
| __count(0x28, 8, instructions_completed) |
| ) |
| #include I(REQUEST_END) |
| |
| /* Processor_core_power_mode (0x95) skipped, no counters */ |
| /* Affinity_domain_information_by_virtual_processor (0xA0) skipped, |
| * no counters */ |
| /* Affinity_domain_information_by_domain (0xB0) skipped, no counters */ |
| /* Affinity_domain_information_by_partition (0xB1) skipped, no counters */ |
| /* Physical_memory_info (0xC0) skipped, no counters */ |
| /* Processor_bus_topology (0xD0) skipped, no counters */ |
| |
| #define REQUEST_NAME partition_hypervisor_queuing_times |
| #define REQUEST_NUM 0xE0 |
| #define REQUEST_IDX_KIND "partition_id=?" |
| #include I(REQUEST_BEGIN) |
| REQUEST(__field(0, 2, partition_id) |
| __array(0x2, 6, reserved1) |
| __count(0x8, 8, time_waiting_for_entitlement) |
| __count(0x10, 8, times_waited_for_entitlement) |
| __count(0x18, 8, time_waiting_for_phys_processor) |
| __count(0x20, 8, times_waited_for_phys_processor) |
| __count(0x28, 8, dispatches_on_home_core) |
| __count(0x30, 8, dispatches_on_home_primary_affinity_domain) |
| __count(0x38, 8, dispatches_on_home_secondary_affinity_domain) |
| __count(0x40, 8, dispatches_off_home_secondary_affinity_domain) |
| __count(0x48, 8, dispatches_on_dedicated_processor_donating_cycles) |
| ) |
| #include I(REQUEST_END) |
| |
| #define REQUEST_NAME system_hypervisor_times |
| #define REQUEST_NUM 0xF0 |
| #define REQUEST_IDX_KIND "starting_index=0xffffffff" |
| #include I(REQUEST_BEGIN) |
| REQUEST(__count(0, 8, time_spent_to_dispatch_virtual_processors) |
| __count(0x8, 8, time_spent_processing_virtual_processor_timers) |
| __count(0x10, 8, time_spent_managing_partitions_over_entitlement) |
| __count(0x18, 8, time_spent_on_system_management) |
| ) |
| #include I(REQUEST_END) |
| |
| #define REQUEST_NAME system_tlbie_count_and_time |
| #define REQUEST_NUM 0xF4 |
| #define REQUEST_IDX_KIND "starting_index=0xffffffff" |
| #include I(REQUEST_BEGIN) |
| REQUEST(__count(0, 8, tlbie_instructions_issued) |
| /* |
| * FIXME: The spec says the offset here is 0x10, which I suspect |
| * is wrong. |
| */ |
| __count(0x8, 8, time_spent_issuing_tlbies) |
| ) |
| #include I(REQUEST_END) |
| |
| #define REQUEST_NAME partition_instruction_count_and_time |
| #define REQUEST_NUM 0x100 |
| #define REQUEST_IDX_KIND "partition_id=?" |
| #include I(REQUEST_BEGIN) |
| REQUEST(__field(0, 2, partition_id) |
| __array(0x2, 0x6, reserved1) |
| __count(0x8, 8, instructions_performed) |
| __count(0x10, 8, time_collected) |
| ) |
| #include I(REQUEST_END) |
| |
| /* set_mmcrh (0x80001000) skipped, no counters */ |
| /* retrieve_hpmcx (0x80002000) skipped, no counters */ |
| |
| #include "req-gen/_end.h" |
