ssb: Clean up extraction of MAC addresses from SPROM
Only rev 1 and 2 ssb SPROMs have fields named et0mac and et1mac;
however, all of the extraction routines extract pseudo data for these
fields from regions that are all 1's resulting in a hardware address
of FF:FF:FF:FF:FF:FF. This patch forces such a fill at the beginning of
the data extraction process, and only does the formal extraction if the
SPROM rev is 1 or 2.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index 0de4b5e..d5cde05 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -327,11 +327,9 @@
s8 gain;
u16 loc[3];
- if (out->revision == 3) { /* rev 3 moved MAC */
+ if (out->revision == 3) /* rev 3 moved MAC */
loc[0] = SSB_SPROM3_IL0MAC;
- loc[1] = SSB_SPROM3_ET0MAC;
- loc[2] = SSB_SPROM3_ET1MAC;
- } else {
+ else {
loc[0] = SSB_SPROM1_IL0MAC;
loc[1] = SSB_SPROM1_ET0MAC;
loc[2] = SSB_SPROM1_ET1MAC;
@@ -340,13 +338,15 @@
v = in[SPOFF(loc[0]) + i];
*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
}
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(loc[1]) + i];
- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
- }
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(loc[2]) + i];
- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
+ if (out->revision < 3) { /* only rev 1-2 have et0, et1 */
+ for (i = 0; i < 3; i++) {
+ v = in[SPOFF(loc[1]) + i];
+ *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
+ }
+ for (i = 0; i < 3; i++) {
+ v = in[SPOFF(loc[2]) + i];
+ *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
+ }
}
SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
@@ -409,19 +409,11 @@
il0mac_offset = SSB_SPROM4_IL0MAC;
else
il0mac_offset = SSB_SPROM5_IL0MAC;
- /* extract the equivalent of the r1 variables */
+ /* extract the MAC address */
for (i = 0; i < 3; i++) {
v = in[SPOFF(il0mac_offset) + i];
*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
}
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(SSB_SPROM4_ET0MAC) + i];
- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
- }
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(SSB_SPROM4_ET1MAC) + i];
- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
- }
SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
SSB_SPROM4_ETHPHY_ET1A_SHIFT);
@@ -482,6 +474,8 @@
out->revision = in[size - 1] & 0x00FF;
ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
+ memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
+ memset(out->et1mac, 0xFF, 6);
if ((bus->chip_id & 0xFF00) == 0x4400) {
/* Workaround: The BCM44XX chip has a stupid revision
* number stored in the SPROM.
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index 271bb4b..99a0f99 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -245,8 +245,6 @@
/* SPROM Revision 3 (inherits most data from rev 2) */
#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */
-#define SSB_SPROM3_ET0MAC 0x1050 /* 6 bytes MAC address for Ethernet ?? */
-#define SSB_SPROM3_ET1MAC 0x1050 /* 6 bytes MAC address for 802.11a ?? */
#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
@@ -267,8 +265,6 @@
/* SPROM Revision 4 */
#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */
-#define SSB_SPROM4_ET0MAC 0x1018 /* 6 bytes MAC address for Ethernet ?? */
-#define SSB_SPROM4_ET1MAC 0x1018 /* 6 bytes MAC address for 802.11a ?? */
#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */
#define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
#define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
