// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Zoran ZR36016 basic configuration functions
 *
 * Copyright (C) 2001 Wolfgang Scherr <scherr@net4you.at>
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>

/* headerfile of this module */
#include "zr36016.h"

/* codec io API */
#include "videocodec.h"

/*
 * it doesn't make sense to have more than 20 or so,
 * just to prevent some unwanted loops
 */
#define MAX_CODECS 20

/* amount of chips attached via this driver */
static int zr36016_codecs;

/*
 * Local hardware I/O functions: read/write via codec layer
 * (registers are located in the master device)
 */

/* read and write functions */
static u8 zr36016_read(struct zr36016 *ptr, u16 reg)
{
	u8 value = 0;
	struct zoran *zr = videocodec_to_zoran(ptr->codec);

	/* just in case something is wrong... */
	if (ptr->codec->master_data->readreg)
		value = (ptr->codec->master_data->readreg(ptr->codec, reg)) & 0xFF;
	else
		zrdev_err(zr, "%s: invalid I/O setup, nothing read!\n", ptr->name);

	zrdev_dbg(zr, "%s: reading from 0x%04x: %02x\n", ptr->name, reg, value);

	return value;
}

static void zr36016_write(struct zr36016 *ptr, u16 reg, u8 value)
{
	struct zoran *zr = videocodec_to_zoran(ptr->codec);

	zrdev_dbg(zr, "%s: writing 0x%02x to 0x%04x\n", ptr->name, value, reg);

	// just in case something is wrong...
	if (ptr->codec->master_data->writereg)
		ptr->codec->master_data->writereg(ptr->codec, reg, value);
	else
		zrdev_err(zr, "%s: invalid I/O setup, nothing written!\n", ptr->name);
}

/*
 * indirect read and write functions
 *
 * the 016 supports auto-addr-increment, but
 * writing it all time cost not much and is safer...
 */
static u8 zr36016_readi(struct zr36016 *ptr, u16 reg)
{
	u8 value = 0;
	struct zoran *zr = videocodec_to_zoran(ptr->codec);

	/* just in case something is wrong... */
	if ((ptr->codec->master_data->writereg) && (ptr->codec->master_data->readreg)) {
		ptr->codec->master_data->writereg(ptr->codec, ZR016_IADDR, reg & 0x0F);
		value = (ptr->codec->master_data->readreg(ptr->codec, ZR016_IDATA)) & 0xFF;
	} else {
		zrdev_err(zr, "%s: invalid I/O setup, nothing read (i)!\n", ptr->name);
	}

	zrdev_dbg(zr, "%s: reading indirect from 0x%04x: %02x\n",
		  ptr->name, reg, value);
	return value;
}

static void zr36016_writei(struct zr36016 *ptr, u16 reg, u8 value)
{
	struct zoran *zr = videocodec_to_zoran(ptr->codec);

	zrdev_dbg(zr, "%s: writing indirect 0x%02x to 0x%04x\n", ptr->name,
		  value, reg);

	/* just in case something is wrong... */
	if (ptr->codec->master_data->writereg) {
		ptr->codec->master_data->writereg(ptr->codec, ZR016_IADDR, reg & 0x0F);
		ptr->codec->master_data->writereg(ptr->codec, ZR016_IDATA, value & 0x0FF);
	} else {
		zrdev_err(zr, "%s: invalid I/O setup, nothing written (i)!\n", ptr->name);
	}
}

/* Local helper function: version read */

/* version kept in datastructure */
static u8 zr36016_read_version(struct zr36016 *ptr)
{
	ptr->version = zr36016_read(ptr, 0) >> 4;
	return ptr->version;
}

/*
 * Local helper function: basic test of "connectivity", writes/reads
 * to/from PAX-Lo register
 */

static int zr36016_basic_test(struct zr36016 *ptr)
{
	struct zoran *zr = videocodec_to_zoran(ptr->codec);

	if (*KERN_INFO <= CONSOLE_LOGLEVEL_DEFAULT) {
		int i;

		zr36016_writei(ptr, ZR016I_PAX_LO, 0x55);
		zrdev_dbg(zr, "%s: registers: ", ptr->name);
		for (i = 0; i <= 0x0b; i++)
			zrdev_dbg(zr, "%02x ", zr36016_readi(ptr, i));
		zrdev_dbg(zr, "\n");
	}
	// for testing just write 0, then the default value to a register and read
	// it back in both cases
	zr36016_writei(ptr, ZR016I_PAX_LO, 0x00);
	if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0) {
		zrdev_err(zr, "%s: attach failed, can't connect to vfe processor!\n", ptr->name);
		return -ENXIO;
	}
	zr36016_writei(ptr, ZR016I_PAX_LO, 0x0d0);
	if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0d0) {
		zrdev_err(zr, "%s: attach failed, can't connect to vfe processor!\n", ptr->name);
		return -ENXIO;
	}
	// we allow version numbers from 0-3, should be enough, though
	zr36016_read_version(ptr);
	if (ptr->version & 0x0c) {
		zrdev_err(zr, "%s: attach failed, suspicious version %d found...\n", ptr->name,
			  ptr->version);
		return -ENXIO;
	}

	return 0;		/* looks good! */
}

/* Basic datasets & init */

static void zr36016_init(struct zr36016 *ptr)
{
	// stop any processing
	zr36016_write(ptr, ZR016_GOSTOP, 0);

	// mode setup (yuv422 in and out, compression/expansuon due to mode)
	zr36016_write(ptr, ZR016_MODE,
		      ZR016_YUV422 | ZR016_YUV422_YUV422 |
		      (ptr->mode == CODEC_DO_COMPRESSION ?
		       ZR016_COMPRESSION : ZR016_EXPANSION));

	// misc setup
	zr36016_writei(ptr, ZR016I_SETUP1,
		       (ptr->xdec ? (ZR016_HRFL | ZR016_HORZ) : 0) |
		       (ptr->ydec ? ZR016_VERT : 0) | ZR016_CNTI);
	zr36016_writei(ptr, ZR016I_SETUP2, ZR016_CCIR);

	// Window setup
	// (no extra offset for now, norm defines offset, default width height)
	zr36016_writei(ptr, ZR016I_PAX_HI, ptr->width >> 8);
	zr36016_writei(ptr, ZR016I_PAX_LO, ptr->width & 0xFF);
	zr36016_writei(ptr, ZR016I_PAY_HI, ptr->height >> 8);
	zr36016_writei(ptr, ZR016I_PAY_LO, ptr->height & 0xFF);
	zr36016_writei(ptr, ZR016I_NAX_HI, ptr->xoff >> 8);
	zr36016_writei(ptr, ZR016I_NAX_LO, ptr->xoff & 0xFF);
	zr36016_writei(ptr, ZR016I_NAY_HI, ptr->yoff >> 8);
	zr36016_writei(ptr, ZR016I_NAY_LO, ptr->yoff & 0xFF);

	/* shall we continue now, please? */
	zr36016_write(ptr, ZR016_GOSTOP, 1);
}

/*
 * CODEC API FUNCTIONS
 *
 * These functions are accessed by the master via the API structure
 */

/*
 * set compression/expansion mode and launches codec -
 * this should be the last call from the master before starting processing
 */
static int zr36016_set_mode(struct videocodec *codec, int mode)
{
	struct zr36016 *ptr = (struct zr36016 *)codec->data;
	struct zoran *zr = videocodec_to_zoran(codec);

	zrdev_dbg(zr, "%s: set_mode %d call\n", ptr->name, mode);

	if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION))
		return -EINVAL;

	ptr->mode = mode;
	zr36016_init(ptr);

	return 0;
}

/* set picture size */
static int zr36016_set_video(struct videocodec *codec, const struct tvnorm *norm,
			     struct vfe_settings *cap, struct vfe_polarity *pol)
{
	struct zr36016 *ptr = (struct zr36016 *)codec->data;
	struct zoran *zr = videocodec_to_zoran(codec);

	zrdev_dbg(zr, "%s: set_video %d.%d, %d/%d-%dx%d (0x%x) call\n",
		  ptr->name, norm->h_start, norm->v_start,
		  cap->x, cap->y, cap->width, cap->height,
		  cap->decimation);

	/*
	 * if () return -EINVAL;
	 * trust the master driver that it knows what it does - so
	 * we allow invalid startx/y for now ...
	 */
	ptr->width = cap->width;
	ptr->height = cap->height;
	/*
	 * (Ronald) This is ugly. zoran_device.c, line 387
	 * already mentions what happens if h_start is even
	 * (blue faces, etc., cr/cb inversed). There's probably
	 * some good reason why h_start is 0 instead of 1, so I'm
	 * leaving it to this for now, but really... This can be
	 * done a lot simpler
	 */
	ptr->xoff = (norm->h_start ? norm->h_start : 1) + cap->x;
	/*
	 * Something to note here (I don't understand it), setting
	 * v_start too high will cause the codec to 'not work'. I
	 * really don't get it. values of 16 (v_start) already break
	 * it here. Just '0' seems to work. More testing needed!
	 */
	ptr->yoff = norm->v_start + cap->y;
	/* (Ronald) dzjeeh, can't this thing do hor_decimation = 4? */
	ptr->xdec = ((cap->decimation & 0xff) == 1) ? 0 : 1;
	ptr->ydec = (((cap->decimation >> 8) & 0xff) == 1) ? 0 : 1;

	return 0;
}

/* additional control functions */
static int zr36016_control(struct videocodec *codec, int type, int size, void *data)
{
	struct zr36016 *ptr = (struct zr36016 *)codec->data;
	struct zoran *zr = videocodec_to_zoran(codec);
	int *ival = (int *)data;

	zrdev_dbg(zr, "%s: control %d call with %d byte\n",
		  ptr->name, type, size);

	switch (type) {
	case CODEC_G_STATUS:	/* get last status - we don't know it ... */
		if (size != sizeof(int))
			return -EFAULT;
		*ival = 0;
		break;

	case CODEC_G_CODEC_MODE:
		if (size != sizeof(int))
			return -EFAULT;
		*ival = 0;
		break;

	case CODEC_S_CODEC_MODE:
		if (size != sizeof(int))
			return -EFAULT;
		if (*ival != 0)
			return -EINVAL;
		/* not needed, do nothing */
		return 0;

	case CODEC_G_VFE:
	case CODEC_S_VFE:
		return 0;

	case CODEC_S_MMAP:
		/* not available, give an error */
		return -ENXIO;

	default:
		return -EINVAL;
	}

	return size;
}

/*
 * Exit and unregister function:
 *
 * Deinitializes Zoran's JPEG processor
 */

static int zr36016_unset(struct videocodec *codec)
{
	struct zr36016 *ptr = codec->data;
	struct zoran *zr = videocodec_to_zoran(codec);

	if (ptr) {
		/* do wee need some codec deinit here, too ???? */

		zrdev_dbg(zr, "%s: finished codec #%d\n", ptr->name, ptr->num);
		kfree(ptr);
		codec->data = NULL;

		zr36016_codecs--;
		return 0;
	}

	return -EFAULT;
}

/*
 * Setup and registry function:
 *
 * Initializes Zoran's JPEG processor
 *
 * Also sets pixel size, average code size, mode (compr./decompr.)
 * (the given size is determined by the processor with the video interface)
 */

static int zr36016_setup(struct videocodec *codec)
{
	struct zr36016 *ptr;
	struct zoran *zr = videocodec_to_zoran(codec);
	int res;

	zrdev_dbg(zr, "zr36016: initializing VFE subsystem #%d.\n", zr36016_codecs);

	if (zr36016_codecs == MAX_CODECS) {
		zrdev_err(zr, "zr36016: Can't attach more codecs!\n");
		return -ENOSPC;
	}
	//mem structure init
	ptr = kzalloc(sizeof(*ptr), GFP_KERNEL);
	codec->data = ptr;
	if (!ptr)
		return -ENOMEM;

	snprintf(ptr->name, sizeof(ptr->name), "zr36016[%d]", zr36016_codecs);
	ptr->num = zr36016_codecs++;
	ptr->codec = codec;

	//testing
	res = zr36016_basic_test(ptr);
	if (res < 0) {
		zr36016_unset(codec);
		return res;
	}
	//final setup
	ptr->mode = CODEC_DO_COMPRESSION;
	ptr->width = 768;
	ptr->height = 288;
	ptr->xdec = 1;
	ptr->ydec = 0;
	zr36016_init(ptr);

	zrdev_dbg(zr, "%s: codec v%d attached and running\n",
		  ptr->name, ptr->version);

	return 0;
}

static const struct videocodec zr36016_codec = {
	.name = "zr36016",
	.magic = 0L,		/* magic not used */
	.flags =
	    CODEC_FLAG_HARDWARE | CODEC_FLAG_VFE | CODEC_FLAG_ENCODER |
	    CODEC_FLAG_DECODER,
	.type = CODEC_TYPE_ZR36016,
	.setup = zr36016_setup,	/* functionality */
	.unset = zr36016_unset,
	.set_mode = zr36016_set_mode,
	.set_video = zr36016_set_video,
	.control = zr36016_control,
	/* others are not used */
};

/* HOOK IN DRIVER AS KERNEL MODULE */

int zr36016_init_module(void)
{
	zr36016_codecs = 0;
	return videocodec_register(&zr36016_codec);
}

void zr36016_cleanup_module(void)
{
	if (zr36016_codecs) {
		pr_debug("zr36016: something's wrong - %d codecs left somehow.\n",
			 zr36016_codecs);
	}
	videocodec_unregister(&zr36016_codec);
}