cfg80211: basic support for PBSS network type
PBSS (Personal Basic Service Set) is a new BSS type for DMG
networks. It is similar to infrastructure BSS, having an AP-like
entity called PCP (PBSS Control Point), but it has few differences.
PBSS support is mandatory for 11ad devices.
Add support for PBSS by introducing a new PBSS flag attribute.
The PBSS flag is used in the START_AP command to request starting
a PCP instead of an AP, and in the CONNECT command to request
connecting to a PCP instead of an AP.
Signed-off-by: Lior David <liord@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 20d07ef..1f231cd 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -422,6 +422,11 @@
if (sme->privacy && !rsn_eid)
wil_info(wil, "WSC connection\n");
+ if (sme->pbss) {
+ wil_err(wil, "connect - PBSS not yet supported\n");
+ return -EOPNOTSUPP;
+ }
+
bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid,
sme->ssid, sme->ssid_len,
IEEE80211_BSS_TYPE_ESS, IEEE80211_PRIVACY_ANY);
@@ -870,6 +875,11 @@
return -EINVAL;
}
+ if (info->pbss) {
+ wil_err(wil, "AP: PBSS not yet supported\n");
+ return -EOPNOTSUPP;
+ }
+
switch (info->hidden_ssid) {
case NL80211_HIDDEN_SSID_NOT_IN_USE:
hidden_ssid = WMI_HIDDEN_SSID_DISABLED;
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 9bcaaf7..9e1b24c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -712,6 +712,8 @@
* @p2p_opp_ps: P2P opportunistic PS
* @acl: ACL configuration used by the drivers which has support for
* MAC address based access control
+ * @pbss: If set, start as a PCP instead of AP. Relevant for DMG
+ * networks.
*/
struct cfg80211_ap_settings {
struct cfg80211_chan_def chandef;
@@ -730,6 +732,7 @@
u8 p2p_ctwindow;
bool p2p_opp_ps;
const struct cfg80211_acl_data *acl;
+ bool pbss;
};
/**
@@ -1888,6 +1891,8 @@
* @ht_capa_mask: The bits of ht_capa which are to be used.
* @vht_capa: VHT Capability overrides
* @vht_capa_mask: The bits of vht_capa which are to be used.
+ * @pbss: if set, connect to a PCP instead of AP. Valid for DMG
+ * networks.
*/
struct cfg80211_connect_params {
struct ieee80211_channel *channel;
@@ -1910,6 +1915,7 @@
struct ieee80211_ht_cap ht_capa_mask;
struct ieee80211_vht_cap vht_capa;
struct ieee80211_vht_cap vht_capa_mask;
+ bool pbss;
};
/**
@@ -3489,6 +3495,7 @@
* registered for unexpected class 3 frames (AP mode)
* @conn: (private) cfg80211 software SME connection state machine data
* @connect_keys: (private) keys to set after connection is established
+ * @conn_bss_type: connecting/connected BSS type
* @ibss_fixed: (private) IBSS is using fixed BSSID
* @ibss_dfs_possible: (private) IBSS may change to a DFS channel
* @event_list: (private) list for internal event processing
@@ -3519,6 +3526,7 @@
u8 ssid_len, mesh_id_len, mesh_id_up_len;
struct cfg80211_conn *conn;
struct cfg80211_cached_keys *connect_keys;
+ enum ieee80211_bss_type conn_bss_type;
struct list_head event_list;
spinlock_t event_lock;
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 5b7b5eb..7758969 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1789,6 +1789,10 @@
* thus it must not specify the number of iterations, only the interval
* between scans. The scan plans are executed sequentially.
* Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
+ * @NL80211_ATTR_PBSS: flag attribute. If set it means operate
+ * in a PBSS. Specified in %NL80211_CMD_CONNECT to request
+ * connecting to a PCP, and in %NL80211_CMD_START_AP to start
+ * a PCP instead of AP. Relevant for DMG networks only.
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2164,6 +2168,8 @@
NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
NL80211_ATTR_SCHED_SCAN_PLANS,
+ NL80211_ATTR_PBSS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index d4786f2..268cb49 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -401,6 +401,7 @@
[NL80211_ATTR_NETNS_FD] = { .type = NLA_U32 },
[NL80211_ATTR_SCHED_SCAN_DELAY] = { .type = NLA_U32 },
[NL80211_ATTR_REG_INDOOR] = { .type = NLA_FLAG },
+ [NL80211_ATTR_PBSS] = { .type = NLA_FLAG },
};
/* policy for the key attributes */
@@ -3461,6 +3462,10 @@
return PTR_ERR(params.acl);
}
+ params.pbss = nla_get_flag(info->attrs[NL80211_ATTR_PBSS]);
+ if (params.pbss && !rdev->wiphy.bands[IEEE80211_BAND_60GHZ])
+ return -EOPNOTSUPP;
+
wdev_lock(wdev);
err = rdev_start_ap(rdev, dev, ¶ms);
if (!err) {
@@ -7980,6 +7985,12 @@
connect.flags |= ASSOC_REQ_USE_RRM;
}
+ connect.pbss = nla_get_flag(info->attrs[NL80211_ATTR_PBSS]);
+ if (connect.pbss && !rdev->wiphy.bands[IEEE80211_BAND_60GHZ]) {
+ kzfree(connkeys);
+ return -EOPNOTSUPP;
+ }
+
wdev_lock(dev->ieee80211_ptr);
err = cfg80211_connect(rdev, dev, &connect, connkeys, NULL);
wdev_unlock(dev->ieee80211_ptr);
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index 8020b5b..79bd3a1 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -264,7 +264,7 @@
wdev->conn->params.bssid,
wdev->conn->params.ssid,
wdev->conn->params.ssid_len,
- IEEE80211_BSS_TYPE_ESS,
+ wdev->conn_bss_type,
IEEE80211_PRIVACY(wdev->conn->params.privacy));
if (!bss)
return NULL;
@@ -687,7 +687,7 @@
WARN_ON_ONCE(!wiphy_to_rdev(wdev->wiphy)->ops->connect);
bss = cfg80211_get_bss(wdev->wiphy, NULL, bssid,
wdev->ssid, wdev->ssid_len,
- IEEE80211_BSS_TYPE_ESS,
+ wdev->conn_bss_type,
IEEE80211_PRIVACY_ANY);
if (bss)
cfg80211_hold_bss(bss_from_pub(bss));
@@ -846,7 +846,7 @@
bss = cfg80211_get_bss(wdev->wiphy, channel, bssid, wdev->ssid,
wdev->ssid_len,
- IEEE80211_BSS_TYPE_ESS, IEEE80211_PRIVACY_ANY);
+ wdev->conn_bss_type, IEEE80211_PRIVACY_ANY);
if (WARN_ON(!bss))
return;
@@ -1017,6 +1017,9 @@
memcpy(wdev->ssid, connect->ssid, connect->ssid_len);
wdev->ssid_len = connect->ssid_len;
+ wdev->conn_bss_type = connect->pbss ? IEEE80211_BSS_TYPE_PBSS :
+ IEEE80211_BSS_TYPE_ESS;
+
if (!rdev->ops->connect)
err = cfg80211_sme_connect(wdev, connect, prev_bssid);
else
