| // SPDX-License-Identifier: ISC |
| /* Copyright (C) 2021 MediaTek Inc. |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/firmware.h> |
| #include <linux/usb.h> |
| #include <linux/iopoll.h> |
| #include <asm/unaligned.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| #include "btmtk.h" |
| |
| #define VERSION "0.1" |
| |
| /* It is for mt79xx download rom patch*/ |
| #define MTK_FW_ROM_PATCH_HEADER_SIZE 32 |
| #define MTK_FW_ROM_PATCH_GD_SIZE 64 |
| #define MTK_FW_ROM_PATCH_SEC_MAP_SIZE 64 |
| #define MTK_SEC_MAP_COMMON_SIZE 12 |
| #define MTK_SEC_MAP_NEED_SEND_SIZE 52 |
| |
| /* It is for mt79xx iso data transmission setting */ |
| #define MTK_ISO_THRESHOLD 264 |
| |
| struct btmtk_patch_header { |
| u8 datetime[16]; |
| u8 platform[4]; |
| __le16 hwver; |
| __le16 swver; |
| __le32 magicnum; |
| } __packed; |
| |
| struct btmtk_global_desc { |
| __le32 patch_ver; |
| __le32 sub_sys; |
| __le32 feature_opt; |
| __le32 section_num; |
| } __packed; |
| |
| struct btmtk_section_map { |
| __le32 sectype; |
| __le32 secoffset; |
| __le32 secsize; |
| union { |
| __le32 u4SecSpec[13]; |
| struct { |
| __le32 dlAddr; |
| __le32 dlsize; |
| __le32 seckeyidx; |
| __le32 alignlen; |
| __le32 sectype; |
| __le32 dlmodecrctype; |
| __le32 crc; |
| __le32 reserved[6]; |
| } bin_info_spec; |
| }; |
| } __packed; |
| |
| static void btmtk_coredump(struct hci_dev *hdev) |
| { |
| int err; |
| |
| err = __hci_cmd_send(hdev, 0xfd5b, 0, NULL); |
| if (err < 0) |
| bt_dev_err(hdev, "Coredump failed (%d)", err); |
| } |
| |
| static void btmtk_coredump_hdr(struct hci_dev *hdev, struct sk_buff *skb) |
| { |
| struct btmtk_data *data = hci_get_priv(hdev); |
| char buf[80]; |
| |
| snprintf(buf, sizeof(buf), "Controller Name: 0x%X\n", |
| data->dev_id); |
| skb_put_data(skb, buf, strlen(buf)); |
| |
| snprintf(buf, sizeof(buf), "Firmware Version: 0x%X\n", |
| data->cd_info.fw_version); |
| skb_put_data(skb, buf, strlen(buf)); |
| |
| snprintf(buf, sizeof(buf), "Driver: %s\n", |
| data->cd_info.driver_name); |
| skb_put_data(skb, buf, strlen(buf)); |
| |
| snprintf(buf, sizeof(buf), "Vendor: MediaTek\n"); |
| skb_put_data(skb, buf, strlen(buf)); |
| } |
| |
| static void btmtk_coredump_notify(struct hci_dev *hdev, int state) |
| { |
| struct btmtk_data *data = hci_get_priv(hdev); |
| |
| switch (state) { |
| case HCI_DEVCOREDUMP_IDLE: |
| data->cd_info.state = HCI_DEVCOREDUMP_IDLE; |
| break; |
| case HCI_DEVCOREDUMP_ACTIVE: |
| data->cd_info.state = HCI_DEVCOREDUMP_ACTIVE; |
| break; |
| case HCI_DEVCOREDUMP_TIMEOUT: |
| case HCI_DEVCOREDUMP_ABORT: |
| case HCI_DEVCOREDUMP_DONE: |
| data->cd_info.state = HCI_DEVCOREDUMP_IDLE; |
| btmtk_reset_sync(hdev); |
| break; |
| } |
| } |
| |
| void btmtk_fw_get_filename(char *buf, size_t size, u32 dev_id, u32 fw_ver, |
| u32 fw_flavor) |
| { |
| if (dev_id == 0x7925) |
| snprintf(buf, size, |
| "mediatek/mt%04x/BT_RAM_CODE_MT%04x_1_%x_hdr.bin", |
| dev_id & 0xffff, dev_id & 0xffff, (fw_ver & 0xff) + 1); |
| else if (dev_id == 0x7961 && fw_flavor) |
| snprintf(buf, size, |
| "mediatek/BT_RAM_CODE_MT%04x_1a_%x_hdr.bin", |
| dev_id & 0xffff, (fw_ver & 0xff) + 1); |
| else |
| snprintf(buf, size, |
| "mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin", |
| dev_id & 0xffff, (fw_ver & 0xff) + 1); |
| } |
| EXPORT_SYMBOL_GPL(btmtk_fw_get_filename); |
| |
| int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname, |
| wmt_cmd_sync_func_t wmt_cmd_sync) |
| { |
| struct btmtk_hci_wmt_params wmt_params; |
| struct btmtk_patch_header *hdr; |
| struct btmtk_global_desc *globaldesc = NULL; |
| struct btmtk_section_map *sectionmap; |
| const struct firmware *fw; |
| const u8 *fw_ptr; |
| const u8 *fw_bin_ptr; |
| int err, dlen, i, status; |
| u8 flag, first_block, retry; |
| u32 section_num, dl_size, section_offset; |
| u8 cmd[64]; |
| |
| err = request_firmware(&fw, fwname, &hdev->dev); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to load firmware file (%d)", err); |
| return err; |
| } |
| |
| fw_ptr = fw->data; |
| fw_bin_ptr = fw_ptr; |
| hdr = (struct btmtk_patch_header *)fw_ptr; |
| globaldesc = (struct btmtk_global_desc *)(fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE); |
| section_num = le32_to_cpu(globaldesc->section_num); |
| |
| bt_dev_info(hdev, "HW/SW Version: 0x%04x%04x, Build Time: %s", |
| le16_to_cpu(hdr->hwver), le16_to_cpu(hdr->swver), hdr->datetime); |
| |
| for (i = 0; i < section_num; i++) { |
| first_block = 1; |
| fw_ptr = fw_bin_ptr; |
| sectionmap = (struct btmtk_section_map *)(fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE + |
| MTK_FW_ROM_PATCH_GD_SIZE + MTK_FW_ROM_PATCH_SEC_MAP_SIZE * i); |
| |
| section_offset = le32_to_cpu(sectionmap->secoffset); |
| dl_size = le32_to_cpu(sectionmap->bin_info_spec.dlsize); |
| |
| if (dl_size > 0) { |
| retry = 20; |
| while (retry > 0) { |
| cmd[0] = 0; /* 0 means legacy dl mode. */ |
| memcpy(cmd + 1, |
| fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE + |
| MTK_FW_ROM_PATCH_GD_SIZE + |
| MTK_FW_ROM_PATCH_SEC_MAP_SIZE * i + |
| MTK_SEC_MAP_COMMON_SIZE, |
| MTK_SEC_MAP_NEED_SEND_SIZE + 1); |
| |
| wmt_params.op = BTMTK_WMT_PATCH_DWNLD; |
| wmt_params.status = &status; |
| wmt_params.flag = 0; |
| wmt_params.dlen = MTK_SEC_MAP_NEED_SEND_SIZE + 1; |
| wmt_params.data = &cmd; |
| |
| err = wmt_cmd_sync(hdev, &wmt_params); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)", |
| err); |
| goto err_release_fw; |
| } |
| |
| if (status == BTMTK_WMT_PATCH_UNDONE) { |
| break; |
| } else if (status == BTMTK_WMT_PATCH_PROGRESS) { |
| msleep(100); |
| retry--; |
| } else if (status == BTMTK_WMT_PATCH_DONE) { |
| goto next_section; |
| } else { |
| bt_dev_err(hdev, "Failed wmt patch dwnld status (%d)", |
| status); |
| err = -EIO; |
| goto err_release_fw; |
| } |
| } |
| |
| fw_ptr += section_offset; |
| wmt_params.op = BTMTK_WMT_PATCH_DWNLD; |
| wmt_params.status = NULL; |
| |
| while (dl_size > 0) { |
| dlen = min_t(int, 250, dl_size); |
| if (first_block == 1) { |
| flag = 1; |
| first_block = 0; |
| } else if (dl_size - dlen <= 0) { |
| flag = 3; |
| } else { |
| flag = 2; |
| } |
| |
| wmt_params.flag = flag; |
| wmt_params.dlen = dlen; |
| wmt_params.data = fw_ptr; |
| |
| err = wmt_cmd_sync(hdev, &wmt_params); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)", |
| err); |
| goto err_release_fw; |
| } |
| |
| dl_size -= dlen; |
| fw_ptr += dlen; |
| } |
| } |
| next_section: |
| continue; |
| } |
| /* Wait a few moments for firmware activation done */ |
| usleep_range(100000, 120000); |
| |
| err_release_fw: |
| release_firmware(fw); |
| |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(btmtk_setup_firmware_79xx); |
| |
| int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname, |
| wmt_cmd_sync_func_t wmt_cmd_sync) |
| { |
| struct btmtk_hci_wmt_params wmt_params; |
| const struct firmware *fw; |
| const u8 *fw_ptr; |
| size_t fw_size; |
| int err, dlen; |
| u8 flag, param; |
| |
| err = request_firmware(&fw, fwname, &hdev->dev); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to load firmware file (%d)", err); |
| return err; |
| } |
| |
| /* Power on data RAM the firmware relies on. */ |
| param = 1; |
| wmt_params.op = BTMTK_WMT_FUNC_CTRL; |
| wmt_params.flag = 3; |
| wmt_params.dlen = sizeof(param); |
| wmt_params.data = ¶m; |
| wmt_params.status = NULL; |
| |
| err = wmt_cmd_sync(hdev, &wmt_params); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to power on data RAM (%d)", err); |
| goto err_release_fw; |
| } |
| |
| fw_ptr = fw->data; |
| fw_size = fw->size; |
| |
| /* The size of patch header is 30 bytes, should be skip */ |
| if (fw_size < 30) { |
| err = -EINVAL; |
| goto err_release_fw; |
| } |
| |
| fw_size -= 30; |
| fw_ptr += 30; |
| flag = 1; |
| |
| wmt_params.op = BTMTK_WMT_PATCH_DWNLD; |
| wmt_params.status = NULL; |
| |
| while (fw_size > 0) { |
| dlen = min_t(int, 250, fw_size); |
| |
| /* Tell device the position in sequence */ |
| if (fw_size - dlen <= 0) |
| flag = 3; |
| else if (fw_size < fw->size - 30) |
| flag = 2; |
| |
| wmt_params.flag = flag; |
| wmt_params.dlen = dlen; |
| wmt_params.data = fw_ptr; |
| |
| err = wmt_cmd_sync(hdev, &wmt_params); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)", |
| err); |
| goto err_release_fw; |
| } |
| |
| fw_size -= dlen; |
| fw_ptr += dlen; |
| } |
| |
| wmt_params.op = BTMTK_WMT_RST; |
| wmt_params.flag = 4; |
| wmt_params.dlen = 0; |
| wmt_params.data = NULL; |
| wmt_params.status = NULL; |
| |
| /* Activate funciton the firmware providing to */ |
| err = wmt_cmd_sync(hdev, &wmt_params); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to send wmt rst (%d)", err); |
| goto err_release_fw; |
| } |
| |
| /* Wait a few moments for firmware activation done */ |
| usleep_range(10000, 12000); |
| |
| err_release_fw: |
| release_firmware(fw); |
| |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(btmtk_setup_firmware); |
| |
| int btmtk_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) |
| { |
| struct sk_buff *skb; |
| long ret; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc1a, 6, bdaddr, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| ret = PTR_ERR(skb); |
| bt_dev_err(hdev, "changing Mediatek device address failed (%ld)", |
| ret); |
| return ret; |
| } |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btmtk_set_bdaddr); |
| |
| void btmtk_reset_sync(struct hci_dev *hdev) |
| { |
| struct btmtk_data *reset_work = hci_get_priv(hdev); |
| int err; |
| |
| hci_dev_lock(hdev); |
| |
| err = hci_cmd_sync_queue(hdev, reset_work->reset_sync, NULL, NULL); |
| if (err) |
| bt_dev_err(hdev, "failed to reset (%d)", err); |
| |
| hci_dev_unlock(hdev); |
| } |
| EXPORT_SYMBOL_GPL(btmtk_reset_sync); |
| |
| int btmtk_register_coredump(struct hci_dev *hdev, const char *name, |
| u32 fw_version) |
| { |
| struct btmtk_data *data = hci_get_priv(hdev); |
| |
| if (!IS_ENABLED(CONFIG_DEV_COREDUMP)) |
| return -EOPNOTSUPP; |
| |
| data->cd_info.fw_version = fw_version; |
| data->cd_info.state = HCI_DEVCOREDUMP_IDLE; |
| data->cd_info.driver_name = name; |
| |
| return hci_devcd_register(hdev, btmtk_coredump, btmtk_coredump_hdr, |
| btmtk_coredump_notify); |
| } |
| EXPORT_SYMBOL_GPL(btmtk_register_coredump); |
| |
| int btmtk_process_coredump(struct hci_dev *hdev, struct sk_buff *skb) |
| { |
| struct btmtk_data *data = hci_get_priv(hdev); |
| int err; |
| |
| if (!IS_ENABLED(CONFIG_DEV_COREDUMP)) { |
| kfree_skb(skb); |
| return 0; |
| } |
| |
| switch (data->cd_info.state) { |
| case HCI_DEVCOREDUMP_IDLE: |
| err = hci_devcd_init(hdev, MTK_COREDUMP_SIZE); |
| if (err < 0) { |
| kfree_skb(skb); |
| break; |
| } |
| data->cd_info.cnt = 0; |
| |
| /* It is supposed coredump can be done within 5 seconds */ |
| schedule_delayed_work(&hdev->dump.dump_timeout, |
| msecs_to_jiffies(5000)); |
| fallthrough; |
| case HCI_DEVCOREDUMP_ACTIVE: |
| default: |
| err = hci_devcd_append(hdev, skb); |
| if (err < 0) |
| break; |
| data->cd_info.cnt++; |
| |
| /* Mediatek coredump data would be more than MTK_COREDUMP_NUM */ |
| if (data->cd_info.cnt > MTK_COREDUMP_NUM && |
| skb->len > MTK_COREDUMP_END_LEN) |
| if (!memcmp((char *)&skb->data[skb->len - MTK_COREDUMP_END_LEN], |
| MTK_COREDUMP_END, MTK_COREDUMP_END_LEN - 1)) { |
| bt_dev_info(hdev, "Mediatek coredump end"); |
| hci_devcd_complete(hdev); |
| } |
| |
| break; |
| } |
| |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(btmtk_process_coredump); |
| |
| #if IS_ENABLED(CONFIG_BT_HCIBTUSB_MTK) |
| static void btmtk_usb_wmt_recv(struct urb *urb) |
| { |
| struct hci_dev *hdev = urb->context; |
| struct btmtk_data *data = hci_get_priv(hdev); |
| struct sk_buff *skb; |
| int err; |
| |
| if (urb->status == 0 && urb->actual_length > 0) { |
| hdev->stat.byte_rx += urb->actual_length; |
| |
| /* WMT event shouldn't be fragmented and the size should be |
| * less than HCI_WMT_MAX_EVENT_SIZE. |
| */ |
| skb = bt_skb_alloc(HCI_WMT_MAX_EVENT_SIZE, GFP_ATOMIC); |
| if (!skb) { |
| hdev->stat.err_rx++; |
| kfree(urb->setup_packet); |
| return; |
| } |
| |
| hci_skb_pkt_type(skb) = HCI_EVENT_PKT; |
| skb_put_data(skb, urb->transfer_buffer, urb->actual_length); |
| |
| /* When someone waits for the WMT event, the skb is being cloned |
| * and being processed the events from there then. |
| */ |
| if (test_bit(BTMTK_TX_WAIT_VND_EVT, &data->flags)) { |
| data->evt_skb = skb_clone(skb, GFP_ATOMIC); |
| if (!data->evt_skb) { |
| kfree_skb(skb); |
| kfree(urb->setup_packet); |
| return; |
| } |
| } |
| |
| err = hci_recv_frame(hdev, skb); |
| if (err < 0) { |
| kfree_skb(data->evt_skb); |
| data->evt_skb = NULL; |
| kfree(urb->setup_packet); |
| return; |
| } |
| |
| if (test_and_clear_bit(BTMTK_TX_WAIT_VND_EVT, |
| &data->flags)) { |
| /* Barrier to sync with other CPUs */ |
| smp_mb__after_atomic(); |
| wake_up_bit(&data->flags, |
| BTMTK_TX_WAIT_VND_EVT); |
| } |
| kfree(urb->setup_packet); |
| return; |
| } else if (urb->status == -ENOENT) { |
| /* Avoid suspend failed when usb_kill_urb */ |
| return; |
| } |
| |
| usb_mark_last_busy(data->udev); |
| |
| /* The URB complete handler is still called with urb->actual_length = 0 |
| * when the event is not available, so we should keep re-submitting |
| * URB until WMT event returns, Also, It's necessary to wait some time |
| * between the two consecutive control URBs to relax the target device |
| * to generate the event. Otherwise, the WMT event cannot return from |
| * the device successfully. |
| */ |
| udelay(500); |
| |
| usb_anchor_urb(urb, data->ctrl_anchor); |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (err < 0) { |
| kfree(urb->setup_packet); |
| /* -EPERM: urb is being killed; |
| * -ENODEV: device got disconnected |
| */ |
| if (err != -EPERM && err != -ENODEV) |
| bt_dev_err(hdev, "urb %p failed to resubmit (%d)", |
| urb, -err); |
| usb_unanchor_urb(urb); |
| } |
| } |
| |
| static int btmtk_usb_submit_wmt_recv_urb(struct hci_dev *hdev) |
| { |
| struct btmtk_data *data = hci_get_priv(hdev); |
| struct usb_ctrlrequest *dr; |
| unsigned char *buf; |
| int err, size = 64; |
| unsigned int pipe; |
| struct urb *urb; |
| |
| urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!urb) |
| return -ENOMEM; |
| |
| dr = kmalloc(sizeof(*dr), GFP_KERNEL); |
| if (!dr) { |
| usb_free_urb(urb); |
| return -ENOMEM; |
| } |
| |
| dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_IN; |
| dr->bRequest = 1; |
| dr->wIndex = cpu_to_le16(0); |
| dr->wValue = cpu_to_le16(48); |
| dr->wLength = cpu_to_le16(size); |
| |
| buf = kmalloc(size, GFP_KERNEL); |
| if (!buf) { |
| kfree(dr); |
| usb_free_urb(urb); |
| return -ENOMEM; |
| } |
| |
| pipe = usb_rcvctrlpipe(data->udev, 0); |
| |
| usb_fill_control_urb(urb, data->udev, pipe, (void *)dr, |
| buf, size, btmtk_usb_wmt_recv, hdev); |
| |
| urb->transfer_flags |= URB_FREE_BUFFER; |
| |
| usb_anchor_urb(urb, data->ctrl_anchor); |
| err = usb_submit_urb(urb, GFP_KERNEL); |
| if (err < 0) { |
| if (err != -EPERM && err != -ENODEV) |
| bt_dev_err(hdev, "urb %p submission failed (%d)", |
| urb, -err); |
| usb_unanchor_urb(urb); |
| } |
| |
| usb_free_urb(urb); |
| |
| return err; |
| } |
| |
| static int btmtk_usb_hci_wmt_sync(struct hci_dev *hdev, |
| struct btmtk_hci_wmt_params *wmt_params) |
| { |
| struct btmtk_data *data = hci_get_priv(hdev); |
| struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc; |
| u32 hlen, status = BTMTK_WMT_INVALID; |
| struct btmtk_hci_wmt_evt *wmt_evt; |
| struct btmtk_hci_wmt_cmd *wc; |
| struct btmtk_wmt_hdr *hdr; |
| int err; |
| |
| /* Send the WMT command and wait until the WMT event returns */ |
| hlen = sizeof(*hdr) + wmt_params->dlen; |
| if (hlen > 255) |
| return -EINVAL; |
| |
| wc = kzalloc(hlen, GFP_KERNEL); |
| if (!wc) |
| return -ENOMEM; |
| |
| hdr = &wc->hdr; |
| hdr->dir = 1; |
| hdr->op = wmt_params->op; |
| hdr->dlen = cpu_to_le16(wmt_params->dlen + 1); |
| hdr->flag = wmt_params->flag; |
| memcpy(wc->data, wmt_params->data, wmt_params->dlen); |
| |
| set_bit(BTMTK_TX_WAIT_VND_EVT, &data->flags); |
| |
| /* WMT cmd/event doesn't follow up the generic HCI cmd/event handling, |
| * it needs constantly polling control pipe until the host received the |
| * WMT event, thus, we should require to specifically acquire PM counter |
| * on the USB to prevent the interface from entering auto suspended |
| * while WMT cmd/event in progress. |
| */ |
| err = usb_autopm_get_interface(data->intf); |
| if (err < 0) |
| goto err_free_wc; |
| |
| err = __hci_cmd_send(hdev, 0xfc6f, hlen, wc); |
| |
| if (err < 0) { |
| clear_bit(BTMTK_TX_WAIT_VND_EVT, &data->flags); |
| usb_autopm_put_interface(data->intf); |
| goto err_free_wc; |
| } |
| |
| /* Submit control IN URB on demand to process the WMT event */ |
| err = btmtk_usb_submit_wmt_recv_urb(hdev); |
| |
| usb_autopm_put_interface(data->intf); |
| |
| if (err < 0) |
| goto err_free_wc; |
| |
| /* The vendor specific WMT commands are all answered by a vendor |
| * specific event and will have the Command Status or Command |
| * Complete as with usual HCI command flow control. |
| * |
| * After sending the command, wait for BTUSB_TX_WAIT_VND_EVT |
| * state to be cleared. The driver specific event receive routine |
| * will clear that state and with that indicate completion of the |
| * WMT command. |
| */ |
| err = wait_on_bit_timeout(&data->flags, BTMTK_TX_WAIT_VND_EVT, |
| TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT); |
| if (err == -EINTR) { |
| bt_dev_err(hdev, "Execution of wmt command interrupted"); |
| clear_bit(BTMTK_TX_WAIT_VND_EVT, &data->flags); |
| goto err_free_wc; |
| } |
| |
| if (err) { |
| bt_dev_err(hdev, "Execution of wmt command timed out"); |
| clear_bit(BTMTK_TX_WAIT_VND_EVT, &data->flags); |
| err = -ETIMEDOUT; |
| goto err_free_wc; |
| } |
| |
| if (data->evt_skb == NULL) |
| goto err_free_wc; |
| |
| /* Parse and handle the return WMT event */ |
| wmt_evt = (struct btmtk_hci_wmt_evt *)data->evt_skb->data; |
| if (wmt_evt->whdr.op != hdr->op) { |
| bt_dev_err(hdev, "Wrong op received %d expected %d", |
| wmt_evt->whdr.op, hdr->op); |
| err = -EIO; |
| goto err_free_skb; |
| } |
| |
| switch (wmt_evt->whdr.op) { |
| case BTMTK_WMT_SEMAPHORE: |
| if (wmt_evt->whdr.flag == 2) |
| status = BTMTK_WMT_PATCH_UNDONE; |
| else |
| status = BTMTK_WMT_PATCH_DONE; |
| break; |
| case BTMTK_WMT_FUNC_CTRL: |
| wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt; |
| if (be16_to_cpu(wmt_evt_funcc->status) == 0x404) |
| status = BTMTK_WMT_ON_DONE; |
| else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420) |
| status = BTMTK_WMT_ON_PROGRESS; |
| else |
| status = BTMTK_WMT_ON_UNDONE; |
| break; |
| case BTMTK_WMT_PATCH_DWNLD: |
| if (wmt_evt->whdr.flag == 2) |
| status = BTMTK_WMT_PATCH_DONE; |
| else if (wmt_evt->whdr.flag == 1) |
| status = BTMTK_WMT_PATCH_PROGRESS; |
| else |
| status = BTMTK_WMT_PATCH_UNDONE; |
| break; |
| } |
| |
| if (wmt_params->status) |
| *wmt_params->status = status; |
| |
| err_free_skb: |
| kfree_skb(data->evt_skb); |
| data->evt_skb = NULL; |
| err_free_wc: |
| kfree(wc); |
| return err; |
| } |
| |
| static int btmtk_usb_func_query(struct hci_dev *hdev) |
| { |
| struct btmtk_hci_wmt_params wmt_params; |
| int status, err; |
| u8 param = 0; |
| |
| /* Query whether the function is enabled */ |
| wmt_params.op = BTMTK_WMT_FUNC_CTRL; |
| wmt_params.flag = 4; |
| wmt_params.dlen = sizeof(param); |
| wmt_params.data = ¶m; |
| wmt_params.status = &status; |
| |
| err = btmtk_usb_hci_wmt_sync(hdev, &wmt_params); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to query function status (%d)", err); |
| return err; |
| } |
| |
| return status; |
| } |
| |
| static int btmtk_usb_uhw_reg_write(struct hci_dev *hdev, u32 reg, u32 val) |
| { |
| struct btmtk_data *data = hci_get_priv(hdev); |
| int pipe, err; |
| void *buf; |
| |
| buf = kzalloc(4, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| put_unaligned_le32(val, buf); |
| |
| pipe = usb_sndctrlpipe(data->udev, 0); |
| err = usb_control_msg(data->udev, pipe, 0x02, |
| 0x5E, |
| reg >> 16, reg & 0xffff, |
| buf, 4, USB_CTRL_SET_TIMEOUT); |
| if (err < 0) |
| bt_dev_err(hdev, "Failed to write uhw reg(%d)", err); |
| |
| kfree(buf); |
| |
| return err; |
| } |
| |
| static int btmtk_usb_uhw_reg_read(struct hci_dev *hdev, u32 reg, u32 *val) |
| { |
| struct btmtk_data *data = hci_get_priv(hdev); |
| int pipe, err; |
| void *buf; |
| |
| buf = kzalloc(4, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| pipe = usb_rcvctrlpipe(data->udev, 0); |
| err = usb_control_msg(data->udev, pipe, 0x01, |
| 0xDE, |
| reg >> 16, reg & 0xffff, |
| buf, 4, USB_CTRL_GET_TIMEOUT); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to read uhw reg(%d)", err); |
| goto err_free_buf; |
| } |
| |
| *val = get_unaligned_le32(buf); |
| bt_dev_dbg(hdev, "reg=%x, value=0x%08x", reg, *val); |
| |
| err_free_buf: |
| kfree(buf); |
| |
| return err; |
| } |
| |
| static int btmtk_usb_reg_read(struct hci_dev *hdev, u32 reg, u32 *val) |
| { |
| struct btmtk_data *data = hci_get_priv(hdev); |
| int pipe, err, size = sizeof(u32); |
| void *buf; |
| |
| buf = kzalloc(size, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| pipe = usb_rcvctrlpipe(data->udev, 0); |
| err = usb_control_msg(data->udev, pipe, 0x63, |
| USB_TYPE_VENDOR | USB_DIR_IN, |
| reg >> 16, reg & 0xffff, |
| buf, size, USB_CTRL_GET_TIMEOUT); |
| if (err < 0) |
| goto err_free_buf; |
| |
| *val = get_unaligned_le32(buf); |
| |
| err_free_buf: |
| kfree(buf); |
| |
| return err; |
| } |
| |
| static int btmtk_usb_id_get(struct hci_dev *hdev, u32 reg, u32 *id) |
| { |
| return btmtk_usb_reg_read(hdev, reg, id); |
| } |
| |
| static u32 btmtk_usb_reset_done(struct hci_dev *hdev) |
| { |
| u32 val = 0; |
| |
| btmtk_usb_uhw_reg_read(hdev, MTK_BT_MISC, &val); |
| |
| return val & MTK_BT_RST_DONE; |
| } |
| |
| int btmtk_usb_subsys_reset(struct hci_dev *hdev, u32 dev_id) |
| { |
| u32 val; |
| int err; |
| |
| if (dev_id == 0x7922) { |
| err = btmtk_usb_uhw_reg_read(hdev, MTK_BT_SUBSYS_RST, &val); |
| if (err < 0) |
| return err; |
| val |= 0x00002020; |
| err = btmtk_usb_uhw_reg_write(hdev, MTK_BT_SUBSYS_RST, val); |
| if (err < 0) |
| return err; |
| err = btmtk_usb_uhw_reg_write(hdev, MTK_EP_RST_OPT, 0x00010001); |
| if (err < 0) |
| return err; |
| err = btmtk_usb_uhw_reg_read(hdev, MTK_BT_SUBSYS_RST, &val); |
| if (err < 0) |
| return err; |
| val |= BIT(0); |
| err = btmtk_usb_uhw_reg_write(hdev, MTK_BT_SUBSYS_RST, val); |
| if (err < 0) |
| return err; |
| msleep(100); |
| } else if (dev_id == 0x7925) { |
| err = btmtk_usb_uhw_reg_read(hdev, MTK_BT_RESET_REG_CONNV3, &val); |
| if (err < 0) |
| return err; |
| val |= (1 << 5); |
| err = btmtk_usb_uhw_reg_write(hdev, MTK_BT_RESET_REG_CONNV3, val); |
| if (err < 0) |
| return err; |
| err = btmtk_usb_uhw_reg_read(hdev, MTK_BT_RESET_REG_CONNV3, &val); |
| if (err < 0) |
| return err; |
| val &= 0xFFFF00FF; |
| val |= (1 << 13); |
| err = btmtk_usb_uhw_reg_write(hdev, MTK_BT_RESET_REG_CONNV3, val); |
| if (err < 0) |
| return err; |
| err = btmtk_usb_uhw_reg_write(hdev, MTK_EP_RST_OPT, 0x00010001); |
| if (err < 0) |
| return err; |
| err = btmtk_usb_uhw_reg_read(hdev, MTK_BT_RESET_REG_CONNV3, &val); |
| if (err < 0) |
| return err; |
| val |= (1 << 0); |
| err = btmtk_usb_uhw_reg_write(hdev, MTK_BT_RESET_REG_CONNV3, val); |
| if (err < 0) |
| return err; |
| err = btmtk_usb_uhw_reg_write(hdev, MTK_UDMA_INT_STA_BT, 0x000000FF); |
| if (err < 0) |
| return err; |
| err = btmtk_usb_uhw_reg_read(hdev, MTK_UDMA_INT_STA_BT, &val); |
| if (err < 0) |
| return err; |
| err = btmtk_usb_uhw_reg_write(hdev, MTK_UDMA_INT_STA_BT1, 0x000000FF); |
| if (err < 0) |
| return err; |
| err = btmtk_usb_uhw_reg_read(hdev, MTK_UDMA_INT_STA_BT1, &val); |
| if (err < 0) |
| return err; |
| msleep(100); |
| } else { |
| /* It's Device EndPoint Reset Option Register */ |
| bt_dev_dbg(hdev, "Initiating reset mechanism via uhw"); |
| err = btmtk_usb_uhw_reg_write(hdev, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT); |
| if (err < 0) |
| return err; |
| err = btmtk_usb_uhw_reg_read(hdev, MTK_BT_WDT_STATUS, &val); |
| if (err < 0) |
| return err; |
| /* Reset the bluetooth chip via USB interface. */ |
| err = btmtk_usb_uhw_reg_write(hdev, MTK_BT_SUBSYS_RST, 1); |
| if (err < 0) |
| return err; |
| err = btmtk_usb_uhw_reg_write(hdev, MTK_UDMA_INT_STA_BT, 0x000000FF); |
| if (err < 0) |
| return err; |
| err = btmtk_usb_uhw_reg_read(hdev, MTK_UDMA_INT_STA_BT, &val); |
| if (err < 0) |
| return err; |
| err = btmtk_usb_uhw_reg_write(hdev, MTK_UDMA_INT_STA_BT1, 0x000000FF); |
| if (err < 0) |
| return err; |
| err = btmtk_usb_uhw_reg_read(hdev, MTK_UDMA_INT_STA_BT1, &val); |
| if (err < 0) |
| return err; |
| /* MT7921 need to delay 20ms between toggle reset bit */ |
| msleep(20); |
| err = btmtk_usb_uhw_reg_write(hdev, MTK_BT_SUBSYS_RST, 0); |
| if (err < 0) |
| return err; |
| err = btmtk_usb_uhw_reg_read(hdev, MTK_BT_SUBSYS_RST, &val); |
| if (err < 0) |
| return err; |
| } |
| |
| err = readx_poll_timeout(btmtk_usb_reset_done, hdev, val, |
| val & MTK_BT_RST_DONE, 20000, 1000000); |
| if (err < 0) |
| bt_dev_err(hdev, "Reset timeout"); |
| |
| if (dev_id == 0x7922) { |
| err = btmtk_usb_uhw_reg_write(hdev, MTK_UDMA_INT_STA_BT, 0x000000FF); |
| if (err < 0) |
| return err; |
| } |
| |
| err = btmtk_usb_id_get(hdev, 0x70010200, &val); |
| if (err < 0 || !val) |
| bt_dev_err(hdev, "Can't get device id, subsys reset fail."); |
| |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(btmtk_usb_subsys_reset); |
| |
| int btmtk_usb_recv_acl(struct hci_dev *hdev, struct sk_buff *skb) |
| { |
| struct btmtk_data *data = hci_get_priv(hdev); |
| u16 handle = le16_to_cpu(hci_acl_hdr(skb)->handle); |
| |
| switch (handle) { |
| case 0xfc6f: /* Firmware dump from device */ |
| /* When the firmware hangs, the device can no longer |
| * suspend and thus disable auto-suspend. |
| */ |
| usb_disable_autosuspend(data->udev); |
| |
| /* We need to forward the diagnostic packet to userspace daemon |
| * for backward compatibility, so we have to clone the packet |
| * extraly for the in-kernel coredump support. |
| */ |
| if (IS_ENABLED(CONFIG_DEV_COREDUMP)) { |
| struct sk_buff *skb_cd = skb_clone(skb, GFP_ATOMIC); |
| |
| if (skb_cd) |
| btmtk_process_coredump(hdev, skb_cd); |
| } |
| |
| fallthrough; |
| case 0x05ff: /* Firmware debug logging 1 */ |
| case 0x05fe: /* Firmware debug logging 2 */ |
| return hci_recv_diag(hdev, skb); |
| } |
| |
| return hci_recv_frame(hdev, skb); |
| } |
| EXPORT_SYMBOL_GPL(btmtk_usb_recv_acl); |
| |
| static int btmtk_isopkt_pad(struct hci_dev *hdev, struct sk_buff *skb) |
| { |
| if (skb->len > MTK_ISO_THRESHOLD) |
| return -EINVAL; |
| |
| if (skb_pad(skb, MTK_ISO_THRESHOLD - skb->len)) |
| return -ENOMEM; |
| |
| __skb_put(skb, MTK_ISO_THRESHOLD - skb->len); |
| |
| return 0; |
| } |
| |
| static int __set_mtk_intr_interface(struct hci_dev *hdev) |
| { |
| struct btmtk_data *btmtk_data = hci_get_priv(hdev); |
| struct usb_interface *intf = btmtk_data->isopkt_intf; |
| int i, err; |
| |
| if (!btmtk_data->isopkt_intf) |
| return -ENODEV; |
| |
| err = usb_set_interface(btmtk_data->udev, MTK_ISO_IFNUM, 1); |
| if (err < 0) { |
| bt_dev_err(hdev, "setting interface failed (%d)", -err); |
| return err; |
| } |
| |
| btmtk_data->isopkt_tx_ep = NULL; |
| btmtk_data->isopkt_rx_ep = NULL; |
| |
| for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { |
| struct usb_endpoint_descriptor *ep_desc; |
| |
| ep_desc = &intf->cur_altsetting->endpoint[i].desc; |
| |
| if (!btmtk_data->isopkt_tx_ep && |
| usb_endpoint_is_int_out(ep_desc)) { |
| btmtk_data->isopkt_tx_ep = ep_desc; |
| continue; |
| } |
| |
| if (!btmtk_data->isopkt_rx_ep && |
| usb_endpoint_is_int_in(ep_desc)) { |
| btmtk_data->isopkt_rx_ep = ep_desc; |
| continue; |
| } |
| } |
| |
| if (!btmtk_data->isopkt_tx_ep || |
| !btmtk_data->isopkt_rx_ep) { |
| bt_dev_err(hdev, "invalid interrupt descriptors"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| struct urb *alloc_mtk_intr_urb(struct hci_dev *hdev, struct sk_buff *skb, |
| usb_complete_t tx_complete) |
| { |
| struct btmtk_data *btmtk_data = hci_get_priv(hdev); |
| struct urb *urb; |
| unsigned int pipe; |
| |
| if (!btmtk_data->isopkt_tx_ep) |
| return ERR_PTR(-ENODEV); |
| |
| urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!urb) |
| return ERR_PTR(-ENOMEM); |
| |
| if (btmtk_isopkt_pad(hdev, skb)) |
| return ERR_PTR(-EINVAL); |
| |
| pipe = usb_sndintpipe(btmtk_data->udev, |
| btmtk_data->isopkt_tx_ep->bEndpointAddress); |
| |
| usb_fill_int_urb(urb, btmtk_data->udev, pipe, |
| skb->data, skb->len, tx_complete, |
| skb, btmtk_data->isopkt_tx_ep->bInterval); |
| |
| skb->dev = (void *)hdev; |
| |
| return urb; |
| } |
| EXPORT_SYMBOL_GPL(alloc_mtk_intr_urb); |
| |
| static int btmtk_recv_isopkt(struct hci_dev *hdev, void *buffer, int count) |
| { |
| struct btmtk_data *btmtk_data = hci_get_priv(hdev); |
| struct sk_buff *skb; |
| unsigned long flags; |
| int err = 0; |
| |
| spin_lock_irqsave(&btmtk_data->isorxlock, flags); |
| skb = btmtk_data->isopkt_skb; |
| |
| while (count) { |
| int len; |
| |
| if (!skb) { |
| skb = bt_skb_alloc(HCI_MAX_ISO_SIZE, GFP_ATOMIC); |
| if (!skb) { |
| err = -ENOMEM; |
| break; |
| } |
| |
| hci_skb_pkt_type(skb) = HCI_ISODATA_PKT; |
| hci_skb_expect(skb) = HCI_ISO_HDR_SIZE; |
| } |
| |
| len = min_t(uint, hci_skb_expect(skb), count); |
| skb_put_data(skb, buffer, len); |
| |
| count -= len; |
| buffer += len; |
| hci_skb_expect(skb) -= len; |
| |
| if (skb->len == HCI_ISO_HDR_SIZE) { |
| __le16 dlen = ((struct hci_iso_hdr *)skb->data)->dlen; |
| |
| /* Complete ISO header */ |
| hci_skb_expect(skb) = __le16_to_cpu(dlen); |
| |
| if (skb_tailroom(skb) < hci_skb_expect(skb)) { |
| kfree_skb(skb); |
| skb = NULL; |
| |
| err = -EILSEQ; |
| break; |
| } |
| } |
| |
| if (!hci_skb_expect(skb)) { |
| /* Complete frame */ |
| hci_recv_frame(hdev, skb); |
| skb = NULL; |
| } |
| } |
| |
| btmtk_data->isopkt_skb = skb; |
| spin_unlock_irqrestore(&btmtk_data->isorxlock, flags); |
| |
| return err; |
| } |
| |
| static void btmtk_intr_complete(struct urb *urb) |
| { |
| struct hci_dev *hdev = urb->context; |
| struct btmtk_data *btmtk_data = hci_get_priv(hdev); |
| int err; |
| |
| BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, |
| urb->actual_length); |
| |
| if (!test_bit(HCI_RUNNING, &hdev->flags)) |
| return; |
| |
| if (hdev->suspended) |
| return; |
| |
| if (urb->status == 0) { |
| hdev->stat.byte_rx += urb->actual_length; |
| |
| if (btmtk_recv_isopkt(hdev, urb->transfer_buffer, |
| urb->actual_length) < 0) { |
| bt_dev_err(hdev, "corrupted iso packet"); |
| hdev->stat.err_rx++; |
| } |
| } else if (urb->status == -ENOENT) { |
| /* Avoid suspend failed when usb_kill_urb */ |
| return; |
| } |
| |
| usb_mark_last_busy(btmtk_data->udev); |
| usb_anchor_urb(urb, &btmtk_data->isopkt_anchor); |
| |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (err < 0) { |
| /* -EPERM: urb is being killed; |
| * -ENODEV: device got disconnected |
| */ |
| if (err != -EPERM && err != -ENODEV) |
| bt_dev_err(hdev, "urb %p failed to resubmit (%d)", |
| urb, -err); |
| if (err != -EPERM) |
| hci_cmd_sync_cancel(hdev, -err); |
| usb_unanchor_urb(urb); |
| } |
| } |
| |
| static int btmtk_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags) |
| { |
| struct btmtk_data *btmtk_data = hci_get_priv(hdev); |
| unsigned char *buf; |
| unsigned int pipe; |
| struct urb *urb; |
| int err, size; |
| |
| BT_DBG("%s", hdev->name); |
| |
| if (!btmtk_data->isopkt_rx_ep) |
| return -ENODEV; |
| |
| urb = usb_alloc_urb(0, mem_flags); |
| if (!urb) |
| return -ENOMEM; |
| size = le16_to_cpu(btmtk_data->isopkt_rx_ep->wMaxPacketSize); |
| |
| buf = kmalloc(size, mem_flags); |
| if (!buf) { |
| usb_free_urb(urb); |
| return -ENOMEM; |
| } |
| |
| pipe = usb_rcvintpipe(btmtk_data->udev, |
| btmtk_data->isopkt_rx_ep->bEndpointAddress); |
| |
| usb_fill_int_urb(urb, btmtk_data->udev, pipe, buf, size, |
| btmtk_intr_complete, hdev, |
| btmtk_data->isopkt_rx_ep->bInterval); |
| |
| urb->transfer_flags |= URB_FREE_BUFFER; |
| |
| usb_mark_last_busy(btmtk_data->udev); |
| usb_anchor_urb(urb, &btmtk_data->isopkt_anchor); |
| |
| err = usb_submit_urb(urb, mem_flags); |
| if (err < 0) { |
| if (err != -EPERM && err != -ENODEV) |
| bt_dev_err(hdev, "urb %p submission failed (%d)", |
| urb, -err); |
| usb_unanchor_urb(urb); |
| } |
| |
| usb_free_urb(urb); |
| |
| return err; |
| } |
| |
| static int btmtk_usb_isointf_init(struct hci_dev *hdev) |
| { |
| struct btmtk_data *btmtk_data = hci_get_priv(hdev); |
| u8 iso_param[2] = { 0x08, 0x01 }; |
| struct sk_buff *skb; |
| int err; |
| |
| init_usb_anchor(&btmtk_data->isopkt_anchor); |
| spin_lock_init(&btmtk_data->isorxlock); |
| |
| __set_mtk_intr_interface(hdev); |
| |
| err = btmtk_submit_intr_urb(hdev, GFP_KERNEL); |
| if (err < 0) { |
| usb_kill_anchored_urbs(&btmtk_data->isopkt_anchor); |
| bt_dev_err(hdev, "ISO intf not support (%d)", err); |
| return err; |
| } |
| |
| skb = __hci_cmd_sync(hdev, 0xfd98, sizeof(iso_param), iso_param, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Failed to apply iso setting (%ld)", PTR_ERR(skb)); |
| return PTR_ERR(skb); |
| } |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| |
| int btmtk_usb_resume(struct hci_dev *hdev) |
| { |
| /* This function describes the specific additional steps taken by MediaTek |
| * when Bluetooth usb driver's resume function is called. |
| */ |
| struct btmtk_data *btmtk_data = hci_get_priv(hdev); |
| |
| /* Resubmit urb for iso data transmission */ |
| if (test_bit(BTMTK_ISOPKT_RUNNING, &btmtk_data->flags)) { |
| if (btmtk_submit_intr_urb(hdev, GFP_NOIO) < 0) |
| clear_bit(BTMTK_ISOPKT_RUNNING, &btmtk_data->flags); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btmtk_usb_resume); |
| |
| int btmtk_usb_suspend(struct hci_dev *hdev) |
| { |
| /* This function describes the specific additional steps taken by MediaTek |
| * when Bluetooth usb driver's suspend function is called. |
| */ |
| struct btmtk_data *btmtk_data = hci_get_priv(hdev); |
| |
| /* Stop urb anchor for iso data transmission */ |
| if (test_bit(BTMTK_ISOPKT_RUNNING, &btmtk_data->flags)) |
| usb_kill_anchored_urbs(&btmtk_data->isopkt_anchor); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btmtk_usb_suspend); |
| |
| int btmtk_usb_setup(struct hci_dev *hdev) |
| { |
| struct btmtk_data *btmtk_data = hci_get_priv(hdev); |
| struct btmtk_hci_wmt_params wmt_params; |
| ktime_t calltime, delta, rettime; |
| struct btmtk_tci_sleep tci_sleep; |
| unsigned long long duration; |
| struct sk_buff *skb; |
| const char *fwname; |
| int err, status; |
| u32 dev_id = 0; |
| char fw_bin_name[64]; |
| u32 fw_version = 0, fw_flavor = 0; |
| u8 param; |
| |
| calltime = ktime_get(); |
| |
| err = btmtk_usb_id_get(hdev, 0x80000008, &dev_id); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to get device id (%d)", err); |
| return err; |
| } |
| |
| if (!dev_id || dev_id != 0x7663) { |
| err = btmtk_usb_id_get(hdev, 0x70010200, &dev_id); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to get device id (%d)", err); |
| return err; |
| } |
| err = btmtk_usb_id_get(hdev, 0x80021004, &fw_version); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to get fw version (%d)", err); |
| return err; |
| } |
| err = btmtk_usb_id_get(hdev, 0x70010020, &fw_flavor); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to get fw flavor (%d)", err); |
| return err; |
| } |
| fw_flavor = (fw_flavor & 0x00000080) >> 7; |
| } |
| |
| btmtk_data->dev_id = dev_id; |
| |
| err = btmtk_register_coredump(hdev, btmtk_data->drv_name, fw_version); |
| if (err < 0) |
| bt_dev_err(hdev, "Failed to register coredump (%d)", err); |
| |
| switch (dev_id) { |
| case 0x7663: |
| fwname = FIRMWARE_MT7663; |
| break; |
| case 0x7668: |
| fwname = FIRMWARE_MT7668; |
| break; |
| case 0x7922: |
| case 0x7961: |
| case 0x7925: |
| /* Reset the device to ensure it's in the initial state before |
| * downloading the firmware to ensure. |
| */ |
| |
| if (!test_bit(BTMTK_FIRMWARE_LOADED, &btmtk_data->flags)) |
| btmtk_usb_subsys_reset(hdev, dev_id); |
| |
| btmtk_fw_get_filename(fw_bin_name, sizeof(fw_bin_name), dev_id, |
| fw_version, fw_flavor); |
| |
| err = btmtk_setup_firmware_79xx(hdev, fw_bin_name, |
| btmtk_usb_hci_wmt_sync); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to set up firmware (%d)", err); |
| clear_bit(BTMTK_FIRMWARE_LOADED, &btmtk_data->flags); |
| return err; |
| } |
| |
| set_bit(BTMTK_FIRMWARE_LOADED, &btmtk_data->flags); |
| |
| /* It's Device EndPoint Reset Option Register */ |
| err = btmtk_usb_uhw_reg_write(hdev, MTK_EP_RST_OPT, |
| MTK_EP_RST_IN_OUT_OPT); |
| if (err < 0) |
| return err; |
| |
| /* Enable Bluetooth protocol */ |
| param = 1; |
| wmt_params.op = BTMTK_WMT_FUNC_CTRL; |
| wmt_params.flag = 0; |
| wmt_params.dlen = sizeof(param); |
| wmt_params.data = ¶m; |
| wmt_params.status = NULL; |
| |
| err = btmtk_usb_hci_wmt_sync(hdev, &wmt_params); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); |
| return err; |
| } |
| |
| hci_set_msft_opcode(hdev, 0xFD30); |
| hci_set_aosp_capable(hdev); |
| |
| /* Set up ISO interface after protocol enabled */ |
| if (test_bit(BTMTK_ISOPKT_OVER_INTR, &btmtk_data->flags)) { |
| if (!btmtk_usb_isointf_init(hdev)) |
| set_bit(BTMTK_ISOPKT_RUNNING, &btmtk_data->flags); |
| } |
| |
| goto done; |
| default: |
| bt_dev_err(hdev, "Unsupported hardware variant (%08x)", |
| dev_id); |
| return -ENODEV; |
| } |
| |
| /* Query whether the firmware is already download */ |
| wmt_params.op = BTMTK_WMT_SEMAPHORE; |
| wmt_params.flag = 1; |
| wmt_params.dlen = 0; |
| wmt_params.data = NULL; |
| wmt_params.status = &status; |
| |
| err = btmtk_usb_hci_wmt_sync(hdev, &wmt_params); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to query firmware status (%d)", err); |
| return err; |
| } |
| |
| if (status == BTMTK_WMT_PATCH_DONE) { |
| bt_dev_info(hdev, "firmware already downloaded"); |
| goto ignore_setup_fw; |
| } |
| |
| /* Setup a firmware which the device definitely requires */ |
| err = btmtk_setup_firmware(hdev, fwname, |
| btmtk_usb_hci_wmt_sync); |
| if (err < 0) |
| return err; |
| |
| ignore_setup_fw: |
| err = readx_poll_timeout(btmtk_usb_func_query, hdev, status, |
| status < 0 || status != BTMTK_WMT_ON_PROGRESS, |
| 2000, 5000000); |
| /* -ETIMEDOUT happens */ |
| if (err < 0) |
| return err; |
| |
| /* The other errors happen in btmtk_usb_func_query */ |
| if (status < 0) |
| return status; |
| |
| if (status == BTMTK_WMT_ON_DONE) { |
| bt_dev_info(hdev, "function already on"); |
| goto ignore_func_on; |
| } |
| |
| /* Enable Bluetooth protocol */ |
| param = 1; |
| wmt_params.op = BTMTK_WMT_FUNC_CTRL; |
| wmt_params.flag = 0; |
| wmt_params.dlen = sizeof(param); |
| wmt_params.data = ¶m; |
| wmt_params.status = NULL; |
| |
| err = btmtk_usb_hci_wmt_sync(hdev, &wmt_params); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); |
| return err; |
| } |
| |
| ignore_func_on: |
| /* Apply the low power environment setup */ |
| tci_sleep.mode = 0x5; |
| tci_sleep.duration = cpu_to_le16(0x640); |
| tci_sleep.host_duration = cpu_to_le16(0x640); |
| tci_sleep.host_wakeup_pin = 0; |
| tci_sleep.time_compensation = 0; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| bt_dev_err(hdev, "Failed to apply low power setting (%d)", err); |
| return err; |
| } |
| kfree_skb(skb); |
| |
| done: |
| rettime = ktime_get(); |
| delta = ktime_sub(rettime, calltime); |
| duration = (unsigned long long)ktime_to_ns(delta) >> 10; |
| |
| bt_dev_info(hdev, "Device setup in %llu usecs", duration); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btmtk_usb_setup); |
| |
| int btmtk_usb_shutdown(struct hci_dev *hdev) |
| { |
| struct btmtk_hci_wmt_params wmt_params; |
| u8 param = 0; |
| int err; |
| |
| /* Disable the device */ |
| wmt_params.op = BTMTK_WMT_FUNC_CTRL; |
| wmt_params.flag = 0; |
| wmt_params.dlen = sizeof(param); |
| wmt_params.data = ¶m; |
| wmt_params.status = NULL; |
| |
| err = btmtk_usb_hci_wmt_sync(hdev, &wmt_params); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); |
| return err; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btmtk_usb_shutdown); |
| #endif |
| |
| MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>"); |
| MODULE_AUTHOR("Mark Chen <mark-yw.chen@mediatek.com>"); |
| MODULE_DESCRIPTION("Bluetooth support for MediaTek devices ver " VERSION); |
| MODULE_VERSION(VERSION); |
| MODULE_LICENSE("GPL"); |
| MODULE_FIRMWARE(FIRMWARE_MT7622); |
| MODULE_FIRMWARE(FIRMWARE_MT7663); |
| MODULE_FIRMWARE(FIRMWARE_MT7668); |
| MODULE_FIRMWARE(FIRMWARE_MT7922); |
| MODULE_FIRMWARE(FIRMWARE_MT7961); |
| MODULE_FIRMWARE(FIRMWARE_MT7925); |