| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Core driver for TPS61050/61052 boost converters, used for while LED |
| * driving, audio power amplification, white LED flash, and generic |
| * boost conversion. Additionally it provides a 1-bit GPIO pin (out or in) |
| * and a flash synchronization pin to synchronize flash events when used as |
| * flashgun. |
| * |
| * Copyright (C) 2011 ST-Ericsson SA |
| * Written on behalf of Linaro for ST-Ericsson |
| * |
| * Author: Linus Walleij <linus.walleij@linaro.org> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/i2c.h> |
| #include <linux/regmap.h> |
| #include <linux/gpio.h> |
| #include <linux/spinlock.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/tps6105x.h> |
| |
| static const struct regmap_config tps6105x_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = TPS6105X_REG_3, |
| }; |
| |
| static int tps6105x_startup(struct tps6105x *tps6105x) |
| { |
| int ret; |
| unsigned int regval; |
| |
| ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, ®val); |
| if (ret) |
| return ret; |
| switch (regval >> TPS6105X_REG0_MODE_SHIFT) { |
| case TPS6105X_REG0_MODE_SHUTDOWN: |
| dev_info(&tps6105x->client->dev, |
| "TPS6105x found in SHUTDOWN mode\n"); |
| break; |
| case TPS6105X_REG0_MODE_TORCH: |
| dev_info(&tps6105x->client->dev, |
| "TPS6105x found in TORCH mode\n"); |
| break; |
| case TPS6105X_REG0_MODE_TORCH_FLASH: |
| dev_info(&tps6105x->client->dev, |
| "TPS6105x found in FLASH mode\n"); |
| break; |
| case TPS6105X_REG0_MODE_VOLTAGE: |
| dev_info(&tps6105x->client->dev, |
| "TPS6105x found in VOLTAGE mode\n"); |
| break; |
| default: |
| break; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * MFD cells - we always have a GPIO cell and we have one cell |
| * which is selected operation mode. |
| */ |
| static struct mfd_cell tps6105x_gpio_cell = { |
| .name = "tps6105x-gpio", |
| }; |
| |
| static struct mfd_cell tps6105x_leds_cell = { |
| .name = "tps6105x-leds", |
| }; |
| |
| static struct mfd_cell tps6105x_flash_cell = { |
| .name = "tps6105x-flash", |
| }; |
| |
| static struct mfd_cell tps6105x_regulator_cell = { |
| .name = "tps6105x-regulator", |
| }; |
| |
| static int tps6105x_add_device(struct tps6105x *tps6105x, |
| struct mfd_cell *cell) |
| { |
| cell->platform_data = tps6105x; |
| cell->pdata_size = sizeof(*tps6105x); |
| |
| return mfd_add_devices(&tps6105x->client->dev, |
| PLATFORM_DEVID_AUTO, cell, 1, NULL, 0, NULL); |
| } |
| |
| static struct tps6105x_platform_data *tps6105x_parse_dt(struct device *dev) |
| { |
| struct device_node *np = dev->of_node; |
| struct tps6105x_platform_data *pdata; |
| struct device_node *child; |
| |
| if (!np) |
| return ERR_PTR(-EINVAL); |
| if (of_get_available_child_count(np) > 1) { |
| dev_err(dev, "cannot support multiple operational modes"); |
| return ERR_PTR(-EINVAL); |
| } |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return ERR_PTR(-ENOMEM); |
| pdata->mode = TPS6105X_MODE_SHUTDOWN; |
| for_each_available_child_of_node(np, child) { |
| if (child->name && !of_node_cmp(child->name, "regulator")) |
| pdata->mode = TPS6105X_MODE_VOLTAGE; |
| else if (child->name && !of_node_cmp(child->name, "led")) |
| pdata->mode = TPS6105X_MODE_TORCH; |
| } |
| |
| return pdata; |
| } |
| |
| static int tps6105x_probe(struct i2c_client *client) |
| { |
| struct tps6105x *tps6105x; |
| struct tps6105x_platform_data *pdata; |
| int ret; |
| |
| pdata = dev_get_platdata(&client->dev); |
| if (!pdata) |
| pdata = tps6105x_parse_dt(&client->dev); |
| if (IS_ERR(pdata)) { |
| dev_err(&client->dev, "No platform data or DT found"); |
| return PTR_ERR(pdata); |
| } |
| |
| tps6105x = devm_kmalloc(&client->dev, sizeof(*tps6105x), GFP_KERNEL); |
| if (!tps6105x) |
| return -ENOMEM; |
| |
| tps6105x->regmap = devm_regmap_init_i2c(client, &tps6105x_regmap_config); |
| if (IS_ERR(tps6105x->regmap)) |
| return PTR_ERR(tps6105x->regmap); |
| |
| i2c_set_clientdata(client, tps6105x); |
| tps6105x->client = client; |
| tps6105x->pdata = pdata; |
| |
| ret = tps6105x_startup(tps6105x); |
| if (ret) { |
| dev_err(&client->dev, "chip initialization failed\n"); |
| return ret; |
| } |
| |
| ret = tps6105x_add_device(tps6105x, &tps6105x_gpio_cell); |
| if (ret) |
| return ret; |
| |
| switch (pdata->mode) { |
| case TPS6105X_MODE_SHUTDOWN: |
| dev_info(&client->dev, |
| "present, not used for anything, only GPIO\n"); |
| break; |
| case TPS6105X_MODE_TORCH: |
| ret = tps6105x_add_device(tps6105x, &tps6105x_leds_cell); |
| break; |
| case TPS6105X_MODE_TORCH_FLASH: |
| ret = tps6105x_add_device(tps6105x, &tps6105x_flash_cell); |
| break; |
| case TPS6105X_MODE_VOLTAGE: |
| ret = tps6105x_add_device(tps6105x, &tps6105x_regulator_cell); |
| break; |
| default: |
| dev_warn(&client->dev, "invalid mode: %d\n", pdata->mode); |
| break; |
| } |
| |
| if (ret) |
| mfd_remove_devices(&client->dev); |
| |
| return ret; |
| } |
| |
| static void tps6105x_remove(struct i2c_client *client) |
| { |
| struct tps6105x *tps6105x = i2c_get_clientdata(client); |
| |
| mfd_remove_devices(&client->dev); |
| |
| /* Put chip in shutdown mode */ |
| regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0, |
| TPS6105X_REG0_MODE_MASK, |
| TPS6105X_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT); |
| } |
| |
| static const struct i2c_device_id tps6105x_id[] = { |
| { "tps61050" }, |
| { "tps61052" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, tps6105x_id); |
| |
| static const struct of_device_id tps6105x_of_match[] = { |
| { .compatible = "ti,tps61050" }, |
| { .compatible = "ti,tps61052" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, tps6105x_of_match); |
| |
| static struct i2c_driver tps6105x_driver = { |
| .driver = { |
| .name = "tps6105x", |
| .of_match_table = tps6105x_of_match, |
| }, |
| .probe = tps6105x_probe, |
| .remove = tps6105x_remove, |
| .id_table = tps6105x_id, |
| }; |
| |
| static int __init tps6105x_init(void) |
| { |
| return i2c_add_driver(&tps6105x_driver); |
| } |
| subsys_initcall(tps6105x_init); |
| |
| static void __exit tps6105x_exit(void) |
| { |
| i2c_del_driver(&tps6105x_driver); |
| } |
| module_exit(tps6105x_exit); |
| |
| MODULE_AUTHOR("Linus Walleij"); |
| MODULE_DESCRIPTION("TPS6105x White LED Boost Converter Driver"); |
| MODULE_LICENSE("GPL v2"); |