blob: b1b2e106f71184eddcea4b4cc031b857340bf755 [file] [log] [blame]
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1995-99, 2000- 02, 06 Ralf Baechle <ralf@linux-mips.org>
* Copyright (C) 2001 MIPS Technologies, Inc.
* Copyright (C) 2004 Thiemo Seufer
* Copyright (C) 2014 Imagination Technologies Ltd.
*/
#include <linux/errno.h>
#include <asm/asm.h>
#include <asm/asmmacro.h>
#include <asm/irqflags.h>
#include <asm/mipsregs.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
#include <asm/isadep.h>
#include <asm/sysmips.h>
#include <asm/thread_info.h>
#include <asm/unistd.h>
#include <asm/war.h>
#include <asm/asm-offsets.h>
.align 5
NESTED(handle_sys, PT_SIZE, sp)
.set noat
SAVE_SOME
TRACE_IRQS_ON_RELOAD
STI
.set at
lw t1, PT_EPC(sp) # skip syscall on return
addiu t1, 4 # skip to next instruction
sw t1, PT_EPC(sp)
sw a3, PT_R26(sp) # save a3 for syscall restarting
/*
* More than four arguments. Try to deal with it by copying the
* stack arguments from the user stack to the kernel stack.
* This Sucks (TM).
*/
lw t0, PT_R29(sp) # get old user stack pointer
/*
* We intentionally keep the kernel stack a little below the top of
* userspace so we don't have to do a slower byte accurate check here.
*/
addu t4, t0, 32
bltz t4, bad_stack # -> sp is bad
/*
* Ok, copy the args from the luser stack to the kernel stack.
*/
.set push
.set noreorder
.set nomacro
load_a4: user_lw(t5, 16(t0)) # argument #5 from usp
load_a5: user_lw(t6, 20(t0)) # argument #6 from usp
load_a6: user_lw(t7, 24(t0)) # argument #7 from usp
load_a7: user_lw(t8, 28(t0)) # argument #8 from usp
loads_done:
sw t5, 16(sp) # argument #5 to ksp
sw t6, 20(sp) # argument #6 to ksp
sw t7, 24(sp) # argument #7 to ksp
sw t8, 28(sp) # argument #8 to ksp
.set pop
.section __ex_table,"a"
PTR load_a4, bad_stack_a4
PTR load_a5, bad_stack_a5
PTR load_a6, bad_stack_a6
PTR load_a7, bad_stack_a7
.previous
lw t0, TI_FLAGS($28) # syscall tracing enabled?
li t1, _TIF_WORK_SYSCALL_ENTRY
and t0, t1
bnez t0, syscall_trace_entry # -> yes
syscall_common:
subu v0, v0, __NR_O32_Linux # check syscall number
sltiu t0, v0, __NR_O32_Linux_syscalls
beqz t0, illegal_syscall
sll t0, v0, 2
la t1, sys_call_table
addu t1, t0
lw t2, (t1) # syscall routine
beqz t2, illegal_syscall
jalr t2 # Do The Real Thing (TM)
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
sw t0, PT_R7(sp) # set error flag
beqz t0, 1f
lw t1, PT_R2(sp) # syscall number
negu v0 # error
sw t1, PT_R0(sp) # save it for syscall restarting
1: sw v0, PT_R2(sp) # result
o32_syscall_exit:
j syscall_exit_partial
/* ------------------------------------------------------------------------ */
syscall_trace_entry:
SAVE_STATIC
move a0, sp
/*
* syscall number is in v0 unless we called syscall(__NR_###)
* where the real syscall number is in a0
*/
move a1, v0
subu t2, v0, __NR_O32_Linux
bnez t2, 1f /* __NR_syscall at offset 0 */
lw a1, PT_R4(sp)
1: jal syscall_trace_enter
bltz v0, 1f # seccomp failed? Skip syscall
RESTORE_STATIC
lw v0, PT_R2(sp) # Restore syscall (maybe modified)
lw a0, PT_R4(sp) # Restore argument registers
lw a1, PT_R5(sp)
lw a2, PT_R6(sp)
lw a3, PT_R7(sp)
j syscall_common
1: j syscall_exit
/* ------------------------------------------------------------------------ */
/*
* Our open-coded access area sanity test for the stack pointer
* failed. We probably should handle this case a bit more drastic.
*/
bad_stack:
li v0, EFAULT
sw v0, PT_R2(sp)
li t0, 1 # set error flag
sw t0, PT_R7(sp)
j o32_syscall_exit
bad_stack_a4:
li t5, 0
b load_a5
bad_stack_a5:
li t6, 0
b load_a6
bad_stack_a6:
li t7, 0
b load_a7
bad_stack_a7:
li t8, 0
b loads_done
/*
* The system call does not exist in this kernel
*/
illegal_syscall:
li v0, ENOSYS # error
sw v0, PT_R2(sp)
li t0, 1 # set error flag
sw t0, PT_R7(sp)
j o32_syscall_exit
END(handle_sys)
LEAF(sys_syscall)
subu t0, a0, __NR_O32_Linux # check syscall number
sltiu v0, t0, __NR_O32_Linux_syscalls
beqz t0, einval # do not recurse
sll t1, t0, 2
beqz v0, einval
lw t2, sys_call_table(t1) # syscall routine
move a0, a1 # shift argument registers
move a1, a2
move a2, a3
lw a3, 16(sp)
lw t4, 20(sp)
lw t5, 24(sp)
lw t6, 28(sp)
sw t4, 16(sp)
sw t5, 20(sp)
sw t6, 24(sp)
jr t2
/* Unreached */
einval: li v0, -ENOSYS
jr ra
END(sys_syscall)
#ifdef CONFIG_MIPS_MT_FPAFF
/*
* For FPU affinity scheduling on MIPS MT processors, we need to
* intercept sys_sched_xxxaffinity() calls until we get a proper hook
* in kernel/sched/core.c. Considered only temporary we only support
* these hooks for the 32-bit kernel - there is no MIPS64 MT processor
* atm.
*/
#define sys_sched_setaffinity mipsmt_sys_sched_setaffinity
#define sys_sched_getaffinity mipsmt_sys_sched_getaffinity
#endif /* CONFIG_MIPS_MT_FPAFF */
#define __SYSCALL_WITH_COMPAT(nr, native, compat) __SYSCALL(nr, native)
#define __SYSCALL(nr, entry) PTR entry
.align 2
.type sys_call_table, @object
EXPORT(sys_call_table)
#include <asm/syscall_table_o32.h>