Merge tag 'irq' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc sparse IRQ conversion from Arnd Bergmann:
"The I.MX platform is getting converted to use sparse IRQs. We are
doing this for all platforms over time, because this is one of the
requirements for building a multiplatform kernel, and generally a good
idea."
* tag 'irq' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: imx: select USE_OF
ARM: imx: Fix build error due to missing irqs.h include
ARM: imx: enable SPARSE_IRQ for imx platform
ARM: fiq: change FIQ_START to a variable
tty: serial: imx: remove the use of MXC_INTERNAL_IRQS
ARM: imx: remove unneeded mach/irq.h inclusion
i2c: imx: remove unneeded mach/irqs.h inclusion
ARM: imx: add a legacy irqdomain for mx31ads
ARM: imx: add a legacy irqdomain for 3ds_debugboard
ARM: imx: pass gpio than irq number into mxc_expio_init
ARM: imx: leave irq_base of wm8350_platform_data uninitialized
dma: ipu: remove the use of ipu_platform_data
ARM: imx: move irq_domain_add_legacy call into avic driver
ARM: imx: move irq_domain_add_legacy call into tzic driver
gpio/mxc: move irq_domain_add_legacy call into gpio driver
ARM: imx: eliminate macro IRQ_GPIOx()
ARM: imx: eliminate macro IOMUX_TO_IRQ()
ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dc3de40..7658d19 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -470,6 +470,8 @@
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+ select USE_OF
help
Support for Freescale MXC/iMX-based family of processors
diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
index febe495..15cb035 100644
--- a/arch/arm/include/asm/mach/irq.h
+++ b/arch/arm/include/asm/mach/irq.h
@@ -17,7 +17,7 @@
/*
* This is internal. Do not use it.
*/
-extern void init_FIQ(void);
+extern void init_FIQ(int);
extern int show_fiq_list(struct seq_file *, int);
#ifdef CONFIG_MULTI_IRQ_HANDLER
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index c32f845..2adda11 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -122,14 +122,16 @@
while (current_fiq->fiq_op(current_fiq->dev_id, 0));
}
+static int fiq_start;
+
void enable_fiq(int fiq)
{
- enable_irq(fiq + FIQ_START);
+ enable_irq(fiq + fiq_start);
}
void disable_fiq(int fiq)
{
- disable_irq(fiq + FIQ_START);
+ disable_irq(fiq + fiq_start);
}
EXPORT_SYMBOL(set_fiq_handler);
@@ -140,7 +142,8 @@
EXPORT_SYMBOL(enable_fiq);
EXPORT_SYMBOL(disable_fiq);
-void __init init_FIQ(void)
+void __init init_FIQ(int start)
{
no_fiq_insn = *(unsigned long *)0xffff001c;
+ fiq_start = start;
}
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 7616101..afd542a 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -382,7 +382,6 @@
config MACH_IMX27_DT
bool "Support i.MX27 platforms from device tree"
select SOC_IMX27
- select USE_OF
help
Include support for Freescale i.MX27 based platforms
using the device tree for discovery
@@ -674,7 +673,6 @@
config MACH_IMX51_DT
bool "Support i.MX51 platforms from device tree"
select SOC_IMX51
- select USE_OF
select MACH_MX51_BABBAGE
help
Include support for Freescale i.MX51 based platforms
@@ -770,7 +768,6 @@
config MACH_IMX53_DT
bool "Support i.MX53 platforms from device tree"
select SOC_IMX53
- select USE_OF
select MACH_MX53_ARD
select MACH_MX53_EVK
select MACH_MX53_LOCO
@@ -845,7 +842,6 @@
select MFD_ANATOP
select PINCTRL
select PINCTRL_IMX6Q
- select USE_OF
help
This enables support for Freescale i.MX6 Quad processor.
diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h
index 13f533d..8b2ceb4 100644
--- a/arch/arm/mach-imx/devices-imx31.h
+++ b/arch/arm/mach-imx/devices-imx31.h
@@ -42,8 +42,8 @@
#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata)
extern const struct imx_ipu_core_data imx31_ipu_core_data;
-#define imx31_add_ipu_core(pdata) \
- imx_add_ipu_core(&imx31_ipu_core_data, pdata)
+#define imx31_add_ipu_core() \
+ imx_add_ipu_core(&imx31_ipu_core_data)
#define imx31_alloc_mx3_camera(pdata) \
imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata)
#define imx31_add_mx3_sdc_fb(pdata) \
diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h
index 4815be1..c3e9f20 100644
--- a/arch/arm/mach-imx/devices-imx35.h
+++ b/arch/arm/mach-imx/devices-imx35.h
@@ -50,8 +50,8 @@
#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata)
extern const struct imx_ipu_core_data imx35_ipu_core_data;
-#define imx35_add_ipu_core(pdata) \
- imx_add_ipu_core(&imx35_ipu_core_data, pdata)
+#define imx35_add_ipu_core() \
+ imx_add_ipu_core(&imx35_ipu_core_data)
#define imx35_alloc_mx3_camera(pdata) \
imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata)
#define imx35_add_mx3_sdc_fb(pdata) \
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index b46cab0..fd3177f 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -266,7 +266,7 @@
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 1500000,
- .irq = IRQ_GPIOD(25),
+ /* irq number is run-time assigned */
.platform_data = &ads7846_config,
.mode = SPI_MODE_2,
},
@@ -329,6 +329,7 @@
/* SPI_CS0 init */
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
+ eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25));
spi_register_board_info(eukrea_mbimx27_spi_board_info,
ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
index 557f6c48..6e9dd12 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
@@ -95,10 +95,6 @@
},
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "CMO-QVGA",
.mode = fb_modedb,
@@ -287,7 +283,7 @@
printk(KERN_ERR "error setting mbimxsd pads !\n");
imx35_add_imx_uart1(&uart_pdata);
- imx35_add_ipu_core(&mx3_ipu_data);
+ imx35_add_ipu_core();
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index 52efe4d..e80d523 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -10,7 +10,6 @@
*/
#include <linux/irq.h>
-#include <linux/irqdomain.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
@@ -33,35 +32,8 @@
{ /* sentinel */ }
};
-static int __init imx27_avic_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL);
- return 0;
-}
-
-static int __init imx27_gpio_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
-
- gpio_irq_base -= 32;
- irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
- NULL);
-
- return 0;
-}
-
-static const struct of_device_id imx27_irq_match[] __initconst = {
- { .compatible = "fsl,imx27-avic", .data = imx27_avic_add_irq_domain, },
- { .compatible = "fsl,imx27-gpio", .data = imx27_gpio_add_irq_domain, },
- { /* sentinel */ }
-};
-
static void __init imx27_dt_init(void)
{
- of_irq_init(imx27_irq_match);
-
of_platform_populate(NULL, of_default_bus_match_table,
imx27_auxdata_lookup, NULL);
}
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 18e78db..d4067fe 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -11,7 +11,6 @@
*/
#include <linux/irq.h>
-#include <linux/irqdomain.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/pinctrl/machine.h>
@@ -45,30 +44,6 @@
{ /* sentinel */ }
};
-static int __init imx51_tzic_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL);
- return 0;
-}
-
-static int __init imx51_gpio_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
-
- gpio_irq_base -= 32;
- irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
-
- return 0;
-}
-
-static const struct of_device_id imx51_irq_match[] __initconst = {
- { .compatible = "fsl,imx51-tzic", .data = imx51_tzic_add_irq_domain, },
- { .compatible = "fsl,imx51-gpio", .data = imx51_gpio_add_irq_domain, },
- { /* sentinel */ }
-};
-
static const struct of_device_id imx51_iomuxc_of_match[] __initconst = {
{ .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, },
{ /* sentinel */ }
@@ -80,8 +55,6 @@
const struct of_device_id *of_id;
void (*func)(void);
- of_irq_init(imx51_irq_match);
-
pinctrl_provide_dummies();
node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c
index eb04b62..fdd9080 100644
--- a/arch/arm/mach-imx/imx53-dt.c
+++ b/arch/arm/mach-imx/imx53-dt.c
@@ -15,7 +15,6 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
-#include <linux/irqdomain.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/pinctrl/machine.h>
@@ -52,30 +51,6 @@
{ /* sentinel */ }
};
-static int __init imx53_tzic_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL);
- return 0;
-}
-
-static int __init imx53_gpio_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
-
- gpio_irq_base -= 32;
- irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
-
- return 0;
-}
-
-static const struct of_device_id imx53_irq_match[] __initconst = {
- { .compatible = "fsl,imx53-tzic", .data = imx53_tzic_add_irq_domain, },
- { .compatible = "fsl,imx53-gpio", .data = imx53_gpio_add_irq_domain, },
- { /* sentinel */ }
-};
-
static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
{ .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, },
{ .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, },
@@ -103,8 +78,6 @@
const struct of_device_id *of_id;
void (*func)(void);
- of_irq_init(imx53_irq_match);
-
pinctrl_provide_dummies();
node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index f4a63ee..7b99a79 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/dm9000.h>
+#include <linux/gpio.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
@@ -26,7 +27,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <mach/iomux-mx1.h>
#include "devices-imx1.h"
@@ -87,8 +87,7 @@
.end = MX1_CS4_PHYS + 0x00C00003,
.flags = IORESOURCE_MEM,
}, {
- .start = IRQ_GPIOB(14),
- .end = IRQ_GPIOB(14),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
@@ -129,6 +128,8 @@
imx1_add_imx_i2c(&apf9328_i2c_data);
+ dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14));
+ dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14));
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index c650145..2c6ab32 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -367,10 +367,6 @@
},
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "CRT-VGA",
.mode = fb_modedb,
@@ -408,7 +404,8 @@
gpio_direction_input(gpio_wp);
/* When supported the trigger type have to be BOTH */
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
+ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)),
+ detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"sdhc-detect", data);
@@ -429,7 +426,7 @@
static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
+ free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), data);
gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
}
@@ -450,8 +447,7 @@
.end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
@@ -498,6 +494,10 @@
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+ armadillo5x0_smc911x_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
+ armadillo5x0_smc911x_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
platform_add_devices(devices, ARRAY_SIZE(devices));
imx_add_gpio_keys(&armadillo5x0_button_data);
imx31_add_imx_i2c1(NULL);
@@ -513,7 +513,7 @@
imx31_add_mxc_mmc(0, &sdhc_pdata);
/* Register FB */
- imx31_add_ipu_core(&mx3_ipu_data);
+ imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
/* Register NOR Flash */
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 9a3b06e..2bb9e18d 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -169,28 +169,28 @@
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
- .irq = IRQ_GPIOB(23),
+ /* irq number is run-time assigned */
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
- .irq = IRQ_GPIOB(22),
+ /* irq number is run-time assigned */
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
- .irq = IRQ_GPIOB(27),
+ /* irq number is run-time assigned */
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
- .irq = IRQ_GPIOB(30),
+ /* irq number is run-time assigned */
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
@@ -279,6 +279,10 @@
#endif
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+ serial_platform_data[0].irq = IMX_GPIO_NR(2, 23);
+ serial_platform_data[1].irq = IMX_GPIO_NR(2, 22);
+ serial_platform_data[2].irq = IMX_GPIO_NR(2, 27);
+ serial_platform_data[3].irq = IMX_GPIO_NR(2, 30);
platform_device_register(&serial_device);
#endif
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 1634e54..d49b0ec 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -71,7 +71,7 @@
}, {
I2C_BOARD_INFO("tsc2007", 0x48),
.platform_data = &tsc2007_info,
- .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
+ /* irq number is run-time assigned */
},
};
@@ -172,6 +172,7 @@
imx35_add_imx_uart0(&uart_pdata);
imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
+ eukrea_cpuimx35_i2c_devices[1].irq = gpio_to_irq(TSC2007_IRQGPIO);
i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
index e78b40b..b87cc49 100644
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -258,7 +258,7 @@
.mode = SPI_MODE_0,
.chip_select = 0,
.platform_data = &mcp251x_info,
- .irq = IMX_GPIO_TO_IRQ(CAN_IRQGPIO)
+ /* irq number is run-time assigned */
},
};
@@ -309,6 +309,7 @@
msleep(20);
gpio_set_value(CAN_RST, 1);
imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata);
+ cpuimx51sd_spi_device[0].irq = gpio_to_irq(CAN_IRQGPIO);
spi_register_board_info(cpuimx51sd_spi_device,
ARRAY_SIZE(cpuimx51sd_spi_device));
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index ba09552..f264ddd 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -40,6 +40,7 @@
#include <asm/mach/time.h>
#include <asm/system_info.h>
#include <mach/common.h>
+#include <mach/hardware.h>
#include <mach/iomux-mx27.h>
#include "devices-imx27.h"
@@ -47,7 +48,7 @@
#define TVP5150_RSTN (GPIO_PORTC + 18)
#define TVP5150_PWDN (GPIO_PORTC + 19)
#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
-#define SDHC1_IRQ IRQ_GPIOB(25)
+#define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25)
#define MOTHERBOARD_BIT2 (GPIO_PORTD + 31)
#define MOTHERBOARD_BIT1 (GPIO_PORTD + 30)
@@ -307,14 +308,14 @@
{
int ret;
- ret = request_irq(SDHC1_IRQ, detect_irq, IRQF_TRIGGER_FALLING,
- "mmc-detect", data);
+ ret = request_irq(gpio_to_irq(SDHC1_IRQ_GPIO), detect_irq,
+ IRQF_TRIGGER_FALLING, "mmc-detect", data);
return ret;
}
static void visstrim_m10_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(SDHC1_IRQ, data);
+ free_irq(gpio_to_irq(SDHC1_IRQ_GPIO), data);
}
static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = {
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 140f550..426d208 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -16,7 +16,6 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
-#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@@ -177,21 +176,8 @@
imx6q_clock_map_io();
}
-static int __init imx6q_gpio_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
-
- gpio_irq_base -= 32;
- irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
- NULL);
-
- return 0;
-}
-
static const struct of_device_id imx6q_irq_match[] __initconst = {
{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
- { .compatible = "fsl,imx6q-gpio", .data = imx6q_gpio_add_irq_domain, },
{ /* sentinel */ }
};
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 15a26e9..5d08533 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -73,7 +73,7 @@
{
.membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
.mapbase = KZM_ARM11_16550,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+ /* irq number is run-time assigned */
.irqflags = IRQ_TYPE_EDGE_RISING,
.uartclk = 14745600,
.regshift = 0,
@@ -91,8 +91,7 @@
.flags = IORESOURCE_MEM,
},
{
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
@@ -125,6 +124,13 @@
tmp |= 0x2;
__raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
+ serial_platform_data[0].irq =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+ serial8250_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+ serial8250_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
return platform_device_register(&serial_device);
}
#else
@@ -152,8 +158,7 @@
.flags = IORESOURCE_MEM,
},
{
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
@@ -184,6 +189,11 @@
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+ kzm_smsc9118_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
+ kzm_smsc9118_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
+
return platform_device_register(&kzm_smsc9118_device);
}
#else
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 7274e79..667f359 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -26,7 +26,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx1.h>
-#include <mach/irqs.h>
#include "devices-imx1.h"
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 3e7401f..ed22e3f 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -38,7 +38,7 @@
(MX21ADS_MMIO_BASE_ADDR + (offset))
#define MX21ADS_CS8900A_MMIO_SIZE 0x200000
-#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11)
#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000)
#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000)
@@ -159,9 +159,10 @@
.resource = &mx21ads_flash_resource,
};
-static const struct resource mx21ads_cs8900_resources[] __initconst = {
+static struct resource mx21ads_cs8900_resources[] __initdata = {
DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE),
- DEFINE_RES_IRQ(MX21ADS_CS8900A_IRQ),
+ /* irq number is run-time assigned */
+ DEFINE_RES_IRQ(-1),
};
static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = {
@@ -241,13 +242,13 @@
static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
- return request_irq(IRQ_GPIOD(25), detect_irq,
+ return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq,
IRQF_TRIGGER_FALLING, "mmc-detect", data);
}
static void mx21ads_sdhc_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOD(25), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data);
}
static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = {
@@ -304,6 +305,11 @@
imx21_add_mxc_nand(&mx21ads_nand_board_info);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+ mx21ads_cs8900_resources[1].start =
+ gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
+ mx21ads_cs8900_resources[1].end =
+ gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
platform_device_register_full(&mx21ads_cs8900_devinfo);
}
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index ce9a5c26..58c24c1 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -40,7 +40,6 @@
#include <mach/common.h>
#include <mach/iomux-mx27.h>
#include <mach/ulpi.h>
-#include <mach/irqs.h>
#include <mach/3ds_debugboard.h>
#include "devices-imx27.h"
@@ -48,7 +47,6 @@
#define SD1_EN_GPIO IMX_GPIO_NR(2, 25)
#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23)
#define SPI2_SS0 IMX_GPIO_NR(4, 21)
-#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28))
#define PMIC_INT IMX_GPIO_NR(3, 14)
#define SPI1_SS0 IMX_GPIO_NR(4, 28)
#define SD1_CD IMX_GPIO_NR(2, 26)
@@ -445,7 +443,7 @@
.bus_num = 1,
.chip_select = 0, /* SS0 */
.platform_data = &mc13783_pdata,
- .irq = IMX_GPIO_TO_IRQ(PMIC_INT),
+ /* irq number is run-time assigned */
.mode = SPI_CS_HIGH,
}, {
.modalias = "l4f00242t03",
@@ -496,10 +494,11 @@
imx27_add_spi_imx1(&spi2_pdata);
imx27_add_spi_imx0(&spi1_pdata);
+ mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
spi_register_board_info(mx27_3ds_spi_devs,
ARRAY_SIZE(mx27_3ds_spi_devs));
- if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 7936bb3..7dc59ba 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -246,25 +246,25 @@
static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
- return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
- "sdhc1-card-detect", data);
+ return request_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), detect_irq,
+ IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
}
static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
- return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
- "sdhc2-card-detect", data);
+ return request_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), detect_irq,
+ IRQF_TRIGGER_RISING, "sdhc2-card-detect", data);
}
static void mx27ads_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOE(21), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), data);
}
static void mx27ads_sdhc2_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOB(7), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), data);
}
static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 928e1dc..8915f93 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -44,9 +44,6 @@
#include "devices-imx31.h"
-/* CPLD IRQ line for external uart, external ethernet etc */
-#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
-
static int mx31_3ds_pins[] = {
/* UART1 */
MX31_PIN_CTS1__CTS1,
@@ -277,10 +274,6 @@
},
};
-static struct ipu_platform_data mx3_ipu_data = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "Epson-VGA",
.mode = fb_modedb,
@@ -317,7 +310,7 @@
return ret;
}
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)),
detect_irq, IRQF_DISABLED |
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"sdhc1-detect", data);
@@ -336,7 +329,7 @@
static void mx31_3ds_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), data);
+ free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), data);
gpio_free_array(mx31_3ds_sdhc1_gpios,
ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
}
@@ -539,7 +532,7 @@
.bus_num = 1,
.chip_select = 1, /* SS2 */
.platform_data = &mc13783_pdata,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ /* irq number is run-time assigned */
.mode = SPI_CS_HIGH,
}, {
.modalias = "l4f00242t03",
@@ -714,6 +707,7 @@
imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
imx31_add_spi_imx1(&spi1_pdata);
+ mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(mx31_3ds_spi_devs,
ARRAY_SIZE(mx31_3ds_spi_devs));
@@ -736,7 +730,7 @@
if (!otg_mode_host)
imx31_add_fsl_usb2_udc(&usbotg_pdata);
- if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)))
printk(KERN_WARNING "Init of the debug board failed, all "
"devices on the debug board are unusable.\n");
imx31_add_imx2_wdt();
@@ -744,7 +738,7 @@
imx31_add_mxc_mmc(0, &sdhc1_pdata);
imx31_add_spi_imx0(&spi0_pdata);
- imx31_add_ipu_core(&mx3_ipu_data);
+ imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
/* CSI */
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 4518e54..d37f480 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -21,6 +21,7 @@
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -62,20 +63,18 @@
#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS)
#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
-#define MXC_EXP_IO_BASE MXC_BOARD_IRQ_START
-#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11)
+#define EXPIO_INT_XUART_INTA 10
+#define EXPIO_INT_XUART_INTB 11
#define MXC_MAX_EXP_IO_LINES 16
/* CS8900 */
-#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8)
+#define EXPIO_INT_ENET_INT 8
#define CS4_CS8900_MMIO_START 0x20000
+static struct irq_domain *domain;
+
/*
* The serial port definition structure.
*/
@@ -83,7 +82,6 @@
{
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
.mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
- .irq = EXPIO_INT_XUART_INTA,
.uartclk = 14745600,
.regshift = 0,
.iotype = UPIO_MEM,
@@ -91,7 +89,6 @@
}, {
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
.mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
- .irq = EXPIO_INT_XUART_INTB,
.uartclk = 14745600,
.regshift = 0,
.iotype = UPIO_MEM,
@@ -108,9 +105,9 @@
},
};
-static const struct resource mx31ads_cs8900_resources[] __initconst = {
+static struct resource mx31ads_cs8900_resources[] __initdata = {
DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K),
- DEFINE_RES_IRQ(EXPIO_INT_ENET_INT),
+ DEFINE_RES_IRQ(-1),
};
static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = {
@@ -122,11 +119,19 @@
static int __init mxc_init_extuart(void)
{
+ serial_platform_data[0].irq = irq_find_mapping(domain,
+ EXPIO_INT_XUART_INTA);
+ serial_platform_data[1].irq = irq_find_mapping(domain,
+ EXPIO_INT_XUART_INTB);
return platform_device_register(&serial_device);
}
static void __init mxc_init_ext_ethernet(void)
{
+ mx31ads_cs8900_resources[1].start =
+ irq_find_mapping(domain, EXPIO_INT_ENET_INT);
+ mx31ads_cs8900_resources[1].end =
+ irq_find_mapping(domain, EXPIO_INT_ENET_INT);
platform_device_register_full(
(struct platform_device_info *)&mx31ads_cs8900_devinfo);
}
@@ -157,12 +162,12 @@
imr_val = __raw_readw(PBC_INTMASK_SET_REG);
int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
- expio_irq = MXC_EXP_IO_BASE;
+ expio_irq = 0;
for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
if ((int_valid & 1) == 0)
continue;
- generic_handle_irq(expio_irq);
+ generic_handle_irq(irq_find_mapping(domain, expio_irq));
}
}
@@ -172,7 +177,7 @@
*/
static void expio_mask_irq(struct irq_data *d)
{
- u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+ u32 expio = d->hwirq;
/* mask the interrupt */
__raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
__raw_readw(PBC_INTMASK_CLEAR_REG);
@@ -184,7 +189,7 @@
*/
static void expio_ack_irq(struct irq_data *d)
{
- u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+ u32 expio = d->hwirq;
/* clear the interrupt status */
__raw_writew(1 << expio, PBC_INTSTATUS_REG);
}
@@ -195,7 +200,7 @@
*/
static void expio_unmask_irq(struct irq_data *d)
{
- u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+ u32 expio = d->hwirq;
/* unmask the interrupt */
__raw_writew(1 << expio, PBC_INTMASK_SET_REG);
}
@@ -209,7 +214,8 @@
static void __init mx31ads_init_expio(void)
{
- int i;
+ int irq_base;
+ int i, irq;
printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
@@ -221,13 +227,21 @@
/* disable the interrupt and clear the status */
__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
__raw_writew(0xFFFF, PBC_INTSTATUS_REG);
- for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
- i++) {
+
+ irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
+ WARN_ON(irq_base < 0);
+
+ domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ WARN_ON(!domain);
+
+ for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
- irq_set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH);
- irq_set_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
+ irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_4));
+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+ irq_set_chained_handler(irq, mx31ads_expio_irq_handler);
}
#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
@@ -479,7 +493,6 @@
static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
.init = mx31_wm8350_init,
- .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
};
#endif
@@ -488,13 +501,17 @@
{
I2C_BOARD_INFO("wm8350", 0x1a),
.platform_data = &mx31_wm8350_pdata,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ /* irq number is run-time assigned */
},
#endif
};
static void __init mxc_init_i2c(void)
{
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+ mx31ads_i2c1_devices[0].irq =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+#endif
i2c_register_board_info(1, mx31ads_i2c1_devices,
ARRAY_SIZE(mx31ads_i2c1_devices));
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 83714b0..34b9bf0 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -65,8 +65,7 @@
.flags = IORESOURCE_MEM,
},
{
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
@@ -233,7 +232,7 @@
.bus_num = 1,
.chip_select = 0,
.platform_data = &mc13783_pdata,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ /* irq number is run-time assigned */
};
static struct platform_device *devices[] __initdata = {
@@ -285,10 +284,15 @@
imx31_add_spi_imx0(&spi0_pdata);
imx31_add_spi_imx1(&spi1_pdata);
+ mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(&mc13783_dev, 1);
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+ smsc91x_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
+ smsc91x_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
platform_add_devices(devices, ARRAY_SIZE(devices));
/* USB */
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 686c605..c8785b3 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -43,7 +43,6 @@
#include <mach/common.h>
#include <mach/board-mx31lite.h>
#include <mach/iomux-mx3.h>
-#include <mach/irqs.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
@@ -83,8 +82,7 @@
.end = MX31_CS4_BASE_ADDR + 0x100,
.flags = IORESOURCE_MEM,
}, {
- .start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
- .end = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
@@ -124,7 +122,7 @@
.bus_num = 1,
.chip_select = 0,
.platform_data = &mc13783_pdata,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ /* irq number is run-time assigned */
};
/*
@@ -258,6 +256,7 @@
imx31_add_mxc_nand(&mx31lite_nand_board_info);
imx31_add_spi_imx1(&spi1_pdata);
+ mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(&mc13783_spi_dev, 1);
/* USB */
@@ -274,6 +273,10 @@
pr_warning("could not get LAN irq gpio\n");
else {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+ smsc911x_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+ smsc911x_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6));
platform_device_register(&smsc911x_device);
}
}
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 63e84e6..d46290b 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -303,7 +303,7 @@
static struct spi_board_info moboard_spi_board_info[] __initdata = {
{
.modalias = "mc13783",
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ /* irq number is run-time assigned */
.max_speed_hz = 300000,
.bus_num = 1,
.chip_select = 0,
@@ -473,10 +473,6 @@
.leds = mx31moboard_leds,
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct platform_device *devices[] __initdata = {
&mx31moboard_flash,
};
@@ -494,7 +490,7 @@
int dma, ret = -ENOMEM;
struct platform_device *pdev;
- imx31_add_ipu_core(&mx3_ipu_data);
+ imx31_add_ipu_core();
pdev = imx31_alloc_mx3_camera(&camera_pdata);
if (IS_ERR(pdev))
@@ -557,6 +553,8 @@
gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+ moboard_spi_board_info[0].irq =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(moboard_spi_board_info,
ARRAY_SIZE(moboard_spi_board_info));
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 69018e5..504983c 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -46,7 +46,6 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx35.h>
-#include <mach/irqs.h>
#include <mach/3ds_debugboard.h>
#include <video/platform_lcd.h>
@@ -80,10 +79,6 @@
},
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "Ceramate-CLAA070VC01",
.mode = fb_modedb,
@@ -136,8 +131,6 @@
.dev.platform_data = &mx35_3ds_lcd_data,
};
-#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 1))
-
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -297,10 +290,6 @@
return ret;
}
-static const struct ipu_platform_data mx35_3ds_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct i2c_board_info mx35_3ds_i2c_camera = {
I2C_BOARD_INFO("ov2640", 0x30),
};
@@ -492,7 +481,7 @@
I2C_BOARD_INFO("mc13892", 0x08),
.platform_data = &mx35_3ds_mc13892_data,
- .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
+ /* irq number is run-time assigned */
};
static void __init imx35_3ds_init_mc13892(void)
@@ -504,6 +493,7 @@
return;
}
+ mx35_3ds_i2c_mc13892.irq = gpio_to_irq(GPIO_PMIC_INT);
i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1);
}
@@ -588,7 +578,7 @@
imx35_add_mxc_nand(&mx35pdk_nand_board_info);
imx35_add_sdhci_esdhc_imx(0, NULL);
- if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
pr_warn("Init of the debugboard failed, all "
"devices on the debugboard are unusable.\n");
imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
@@ -596,7 +586,7 @@
i2c_register_board_info(
0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds));
- imx35_add_ipu_core(&mx35_3ds_ipu_data);
+ imx35_add_ipu_core();
platform_device_register(&mx35_3ds_ov2640);
imx35_3ds_init_camera();
diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c
index 2edb563..9ee84a4 100644
--- a/arch/arm/mach-imx/mach-mx51_3ds.c
+++ b/arch/arm/mach-imx/mach-mx51_3ds.c
@@ -26,7 +26,6 @@
#include "devices-imx51.h"
-#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 6))
#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28)
static iomux_v3_cfg_t mx51_3ds_pads[] = {
@@ -148,7 +147,7 @@
spi_register_board_info(mx51_3ds_spi_nor_device,
ARRAY_SIZE(mx51_3ds_spi_nor_device));
- if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ if (mxc_expio_init(MX51_CS5_BASE_ADDR, IMX_GPIO_NR(1, 6)))
printk(KERN_WARNING "Init of the debugboard failed, all "
"devices on the board are unusable.\n");
diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
index 4a7593a..f641a17 100644
--- a/arch/arm/mach-imx/mach-mx53_ard.c
+++ b/arch/arm/mach-imx/mach-mx53_ard.c
@@ -135,8 +135,7 @@
.flags = IORESOURCE_MEM,
},
{
- .start = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
- .end = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
@@ -240,6 +239,8 @@
imx53_ard_common_init();
mx53_ard_io_init();
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+ ard_smsc911x_resources[1].start = gpio_to_irq(ARD_ETHERNET_INT_B);
+ ard_smsc911x_resources[1].end = gpio_to_irq(ARD_ETHERNET_INT_B);
platform_add_devices(devices, ARRAY_SIZE(devices));
imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 8b3d3f0..0bf6d30 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -213,13 +213,13 @@
static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
- return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
- "sdhc1-card-detect", data);
+ return request_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), detect_irq,
+ IRQF_TRIGGER_FALLING, "sdhc1-card-detect", data);
}
static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOF(8), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), data);
}
static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index d37ed25..de8516b 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -36,7 +36,6 @@
#include <mach/hardware.h>
#include <mach/iomux-mx27.h>
#include <asm/mach/time.h>
-#include <mach/irqs.h>
#include <mach/ulpi.h>
#include "devices-imx27.h"
@@ -245,7 +244,7 @@
{
int ret;
- ret = request_irq(IRQ_GPIOC(29), detect_irq,
+ ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"imx-mmc-detect", data);
if (ret)
@@ -257,7 +256,7 @@
static void pca100_sdhc2_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOC(29), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
}
static const struct imxmmc_platform_data sdhc_pdata __initconst = {
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index cd48712..e3c4513 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -225,8 +225,7 @@
.end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
@@ -371,7 +370,7 @@
gpio_direction_input(SDHC1_GPIO_WP);
#endif
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
+ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"sdhc-detect", data);
if (ret)
@@ -391,7 +390,7 @@
static void pcm970_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
+ free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), data);
gpio_free(SDHC1_GPIO_DET);
gpio_free(SDHC1_GPIO_WP);
}
@@ -442,10 +441,6 @@
&pcm037_mt9v022,
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static const struct fb_videomode fb_modedb[] = {
{
/* 240x320 @ 60 Hz Sharp */
@@ -511,8 +506,7 @@
.end = MX31_CS5_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
- .end = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@@ -633,6 +627,10 @@
pr_warning("could not get LAN irq gpio\n");
else {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+ smsc911x_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+ smsc911x_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
platform_device_register(&pcm037_eth);
}
@@ -646,7 +644,7 @@
imx31_add_mxc_nand(&pcm037_nand_board_info);
imx31_add_mxc_mmc(0, &sdhc_pdata);
- imx31_add_ipu_core(&mx3_ipu_data);
+ imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
/* CSI */
@@ -659,6 +657,10 @@
pcm037_init_camera();
+ pcm970_sja1000_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
+ pcm970_sja1000_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
platform_device_register(&pcm970_sja1000);
if (otg_mode_host) {
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 3fbb89d..95f49d9 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -27,6 +27,7 @@
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -274,7 +275,7 @@
static struct spi_board_info pcm038_spi_board_info[] __initdata = {
{
.modalias = "mc13783",
- .irq = IRQ_GPIOB(23),
+ /* irq number is run-time assigned */
.max_speed_hz = 300000,
.bus_num = 0,
.chip_select = 0,
@@ -325,6 +326,7 @@
mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
imx27_add_spi_imx0(&pcm038_spi0_data);
+ pcm038_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(2, 23));
spi_register_board_info(pcm038_spi_board_info,
ARRAY_SIZE(pcm038_spi_board_info));
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 1f20f22..e4bd438 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -76,10 +76,6 @@
},
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "Sharp-LQ035Q7",
.mode = fb_modedb,
@@ -376,7 +372,7 @@
imx35_add_imx_i2c0(&pcm043_i2c0_data);
- imx35_add_ipu_core(&mx3_ipu_data);
+ imx35_add_ipu_core();
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
if (otg_mode_host) {
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index a13087b..fb25fbd 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -22,7 +22,6 @@
#include <linux/gpio.h>
#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -51,8 +50,6 @@
(QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
#define QONG_DNET_SIZE 0x00001000
-#define QONG_FPGA_IRQ IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
-
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -78,8 +75,7 @@
.end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = QONG_FPGA_IRQ,
- .end = QONG_FPGA_IRQ,
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
@@ -95,6 +91,10 @@
{
int ret;
+ dnet_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1));
+ dnet_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1));
ret = platform_device_register(&dnet_device);
return ret;
}
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index cb9ceae..67ff38e 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -14,6 +14,7 @@
#include <linux/mtd/physmap.h>
#include <linux/interrupt.h>
#include <linux/dm9000.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -21,7 +22,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <mach/iomux-mx1.h>
#include "devices-imx1.h"
@@ -78,8 +78,7 @@
.end = MX1_CS5_PHYS + 5,
.flags = IORESOURCE_MEM, /* data access */
}, {
- .start = IRQ_GPIOC(3),
- .end = IRQ_GPIOC(3),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
@@ -123,6 +122,8 @@
imx1_add_imx_uart0(&uart_pdata);
printk(KERN_INFO"Scb9328: Adding devices\n");
+ dm9000x_resources[2].start = gpio_to_irq(IMX_GPIO_NR(3, 3));
+ dm9000x_resources[2].end = gpio_to_irq(IMX_GPIO_NR(3, 3));
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index b26209d..39eb796 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -31,7 +31,6 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx35.h>
-#include <mach/irqs.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
@@ -87,10 +86,6 @@
}
};
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "PT0708048",
.mode = fb_modedb,
@@ -162,7 +157,7 @@
}, {
I2C_BOARD_INFO("mc13892", 0x08),
.platform_data = &vpr200_pmic,
- .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
+ /* irq number is run-time assigned */
}
};
@@ -290,7 +285,7 @@
imx35_add_imx_uart0(NULL);
imx35_add_imx_uart2(NULL);
- imx35_add_ipu_core(&mx3_ipu_data);
+ imx35_add_ipu_core();
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
imx35_add_fsl_usb2_udc(&otg_device_pdata);
@@ -299,6 +294,7 @@
imx35_add_mxc_nand(&vpr200_nand_board_info);
imx35_add_sdhci_esdhc_imx(0, NULL);
+ vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
i2c_register_board_info(0, vpr200_i2c_devices,
ARRAY_SIZE(vpr200_i2c_devices));
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index fcafd3d..6d60d51 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -24,7 +24,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <mach/iomux-v1.h>
static struct map_desc imx_io_desc[] __initdata = {
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 5f43905..d056dad 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -26,7 +26,6 @@
#include <mach/devices-common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <mach/irqs.h>
#include <mach/iomux-v1.h>
/* MX21 memory map definition */
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
index 6ff3714..388928f 100644
--- a/arch/arm/mach-imx/mm-imx25.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -29,7 +29,6 @@
#include <mach/hardware.h>
#include <mach/mx25.h>
#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
/*
* This table defines static virtual address mappings for I/O regions.
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index 2566255..e7e24af 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -26,7 +26,6 @@
#include <mach/devices-common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <mach/irqs.h>
#include <mach/iomux-v1.h>
/* MX27 memory map definition */
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index a8983b9..fe96105 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -30,7 +30,6 @@
#include <mach/devices-common.h>
#include <mach/hardware.h>
#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
#include "crmregs-imx3.h"
diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
index 7d26f76..29e890f 100644
--- a/arch/arm/mach-imx/mx31lilly-db.c
+++ b/arch/arm/mach-imx/mx31lilly-db.c
@@ -130,7 +130,8 @@
gpio_direction_input(gpio_det);
gpio_direction_input(gpio_wp);
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq,
+ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)),
+ detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC detect", data);
if (ret)
@@ -151,7 +152,7 @@
{
gpio_free(gpio_det);
gpio_free(gpio_wp);
- free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+ free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), data);
}
static const struct imxmmc_platform_data mmc_pdata __initconst = {
@@ -161,10 +162,6 @@
};
/* Framebuffer support */
-static const struct ipu_platform_data ipu_data __initconst = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
static const struct fb_videomode fb_modedb = {
/* 640x480 TFT panel (IPS-056T) */
.name = "CRT-VGA",
@@ -198,7 +195,7 @@
return;
}
- imx31_add_ipu_core(&ipu_data);
+ imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&fb_pdata);
gpio_direction_output(LCD_VCC_EN_GPIO, 1);
}
diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c
index fa60ef6..83d17d9 100644
--- a/arch/arm/mach-imx/mx31lite-db.c
+++ b/arch/arm/mach-imx/mx31lite-db.c
@@ -116,7 +116,8 @@
gpio_direction_input(gpio_det);
gpio_direction_input(gpio_wp);
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
+ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)),
+ detect_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC detect", data);
if (ret)
@@ -137,7 +138,7 @@
{
gpio_free(gpio_det);
gpio_free(gpio_wp);
- free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data);
+ free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)), data);
}
static const struct imxmmc_platform_data mmc_pdata __initconst = {
diff --git a/arch/arm/mach-imx/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c
index ec6ca91..ee870c4 100644
--- a/arch/arm/mach-imx/mx51_efika.c
+++ b/arch/arm/mach-imx/mx51_efika.c
@@ -587,7 +587,7 @@
.bus_num = 0,
.chip_select = 0,
.platform_data = &mx51_efika_mc13892_data,
- .irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC),
+ /* irq number is run-time assigned */
},
};
@@ -620,6 +620,7 @@
gpio_request(EFIKAMX_PMIC, "pmic irq");
gpio_direction_input(EFIKAMX_PMIC);
+ mx51_efika_spi_board_info[1].irq = gpio_to_irq(EFIKAMX_PMIC);
spi_register_board_info(mx51_efika_spi_board_info,
ARRAY_SIZE(mx51_efika_spi_board_info));
imx51_add_ecspi(0, &mx51_efika_spi_pdata);
diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
index 99afbc3..9917e2f 100644
--- a/arch/arm/mach-imx/pcm970-baseboard.c
+++ b/arch/arm/mach-imx/pcm970-baseboard.c
@@ -95,14 +95,14 @@
{
int ret;
- ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
- "imx-mmc-detect", data);
+ ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
+ IRQF_TRIGGER_FALLING, "imx-mmc-detect", data);
if (ret)
return ret;
ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
if (ret) {
- free_irq(IRQ_GPIOC(29), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
return ret;
}
@@ -113,7 +113,7 @@
static void pcm970_sdhc2_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOC(29), data);
+ free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
gpio_free(GPIO_PORTC + 28);
}
@@ -192,8 +192,7 @@
.end = MX27_CS4_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = IRQ_GPIOE(19),
- .end = IRQ_GPIOE(19),
+ /* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@@ -227,5 +226,7 @@
imx27_add_imx_fb(&pcm038_fb_data);
mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
imx27_add_mxc_mmc(1, &sdhc_pdata);
+ pcm970_sja1000_resources[1].start = gpio_to_irq(IMX_GPIO_NR(5, 19));
+ pcm970_sja1000_resources[1].end = gpio_to_irq(IMX_GPIO_NR(5, 19));
platform_device_register(&pcm970_sja1000);
}
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
index cf0e669..3e4fa84 100644
--- a/arch/arm/mach-rpc/irq.c
+++ b/arch/arm/mach-rpc/irq.c
@@ -163,6 +163,6 @@
}
}
- init_FIQ();
+ init_FIQ(FIQ_START);
}
diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c
index 5cac2c5..5c10ad0 100644
--- a/arch/arm/plat-mxc/3ds_debugboard.c
+++ b/arch/arm/plat-mxc/3ds_debugboard.c
@@ -12,9 +12,11 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include <linux/smsc911x.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
@@ -48,27 +50,22 @@
/* CPU ID and Personality ID */
#define MCU_BOARD_ID_REG 0x68
-#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_GPIO(irq) ((irq) - MXC_INTERNAL_IRQS)
-
-#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
#define MXC_MAX_EXP_IO_LINES 16
/* interrupts like external uart , external ethernet etc*/
-#define EXPIO_INT_ENET (MXC_BOARD_IRQ_START + 0)
-#define EXPIO_INT_XUART_A (MXC_BOARD_IRQ_START + 1)
-#define EXPIO_INT_XUART_B (MXC_BOARD_IRQ_START + 2)
-#define EXPIO_INT_BUTTON_A (MXC_BOARD_IRQ_START + 3)
-#define EXPIO_INT_BUTTON_B (MXC_BOARD_IRQ_START + 4)
+#define EXPIO_INT_ENET 0
+#define EXPIO_INT_XUART_A 1
+#define EXPIO_INT_XUART_B 2
+#define EXPIO_INT_BUTTON_A 3
+#define EXPIO_INT_BUTTON_B 4
static void __iomem *brd_io;
+static struct irq_domain *domain;
static struct resource smsc911x_resources[] = {
{
.flags = IORESOURCE_MEM,
} , {
- .start = EXPIO_INT_ENET,
- .end = EXPIO_INT_ENET,
.flags = IORESOURCE_IRQ,
},
};
@@ -100,11 +97,11 @@
imr_val = __raw_readw(brd_io + INTR_MASK_REG);
int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
- expio_irq = MXC_BOARD_IRQ_START;
+ expio_irq = 0;
for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
if ((int_valid & 1) == 0)
continue;
- generic_handle_irq(expio_irq);
+ generic_handle_irq(irq_find_mapping(domain, expio_irq));
}
desc->irq_data.chip->irq_ack(&desc->irq_data);
@@ -118,7 +115,7 @@
static void expio_mask_irq(struct irq_data *d)
{
u16 reg;
- u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+ u32 expio = d->hwirq;
reg = __raw_readw(brd_io + INTR_MASK_REG);
reg |= (1 << expio);
@@ -127,7 +124,7 @@
static void expio_ack_irq(struct irq_data *d)
{
- u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+ u32 expio = d->hwirq;
__raw_writew(1 << expio, brd_io + INTR_RESET_REG);
__raw_writew(0, brd_io + INTR_RESET_REG);
@@ -137,7 +134,7 @@
static void expio_unmask_irq(struct irq_data *d)
{
u16 reg;
- u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+ u32 expio = d->hwirq;
reg = __raw_readw(brd_io + INTR_MASK_REG);
reg &= ~(1 << expio);
@@ -155,8 +152,10 @@
REGULATOR_SUPPLY("vddvario", "smsc911x"),
};
-int __init mxc_expio_init(u32 base, u32 p_irq)
+int __init mxc_expio_init(u32 base, u32 intr_gpio)
{
+ u32 p_irq = gpio_to_irq(intr_gpio);
+ int irq_base;
int i;
brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K);
@@ -178,16 +177,23 @@
/*
* Configure INT line as GPIO input
*/
- gpio_request(MXC_IRQ_TO_GPIO(p_irq), "expio_pirq");
- gpio_direction_input(MXC_IRQ_TO_GPIO(p_irq));
+ gpio_request(intr_gpio, "expio_pirq");
+ gpio_direction_input(intr_gpio);
/* disable the interrupt and clear the status */
__raw_writew(0, brd_io + INTR_MASK_REG);
__raw_writew(0xFFFF, brd_io + INTR_RESET_REG);
__raw_writew(0, brd_io + INTR_RESET_REG);
__raw_writew(0x1F, brd_io + INTR_MASK_REG);
- for (i = MXC_EXP_IO_BASE;
- i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); i++) {
+
+ irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
+ WARN_ON(irq_base < 0);
+
+ domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ WARN_ON(!domain);
+
+ for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
@@ -199,6 +205,8 @@
smsc911x_resources[0].start = LAN9217_BASE_ADDR(base);
smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1;
+ smsc911x_resources[1].start = irq_find_mapping(domain, EXPIO_INT_ENET);
+ smsc911x_resources[1].end = irq_find_mapping(domain, EXPIO_INT_ENET);
platform_device_register(&smsc_lan9217_device);
return 0;
diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c
index 689f81f..cbd55c3 100644
--- a/arch/arm/plat-mxc/avic.c
+++ b/arch/arm/plat-mxc/avic.c
@@ -19,11 +19,14 @@
#include <linux/module.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <mach/common.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include "irq-common.h"
@@ -50,15 +53,19 @@
#define AVIC_NUM_IRQS 64
void __iomem *avic_base;
+static struct irq_domain *domain;
static u32 avic_saved_mask_reg[2];
#ifdef CONFIG_MXC_IRQ_PRIOR
static int avic_irq_set_priority(unsigned char irq, unsigned char prio)
{
+ struct irq_data *d = irq_get_irq_data(irq);
unsigned int temp;
unsigned int mask = 0x0F << irq % 8 * 4;
+ irq = d->hwirq;
+
if (irq >= AVIC_NUM_IRQS)
return -EINVAL;
@@ -75,8 +82,11 @@
#ifdef CONFIG_FIQ
static int avic_set_irq_fiq(unsigned int irq, unsigned int type)
{
+ struct irq_data *d = irq_get_irq_data(irq);
unsigned int irqt;
+ irq = d->hwirq;
+
if (irq >= AVIC_NUM_IRQS)
return -EINVAL;
@@ -108,7 +118,7 @@
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct irq_chip_type *ct = gc->chip_types;
- int idx = gc->irq_base >> 5;
+ int idx = d->hwirq >> 5;
avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask);
__raw_writel(gc->wake_active, avic_base + ct->regs.mask);
@@ -118,7 +128,7 @@
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct irq_chip_type *ct = gc->chip_types;
- int idx = gc->irq_base >> 5;
+ int idx = d->hwirq >> 5;
__raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
}
@@ -128,11 +138,10 @@
#define avic_irq_resume NULL
#endif
-static __init void avic_init_gc(unsigned int irq_start)
+static __init void avic_init_gc(int idx, unsigned int irq_start)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
- int idx = irq_start >> 5;
gc = irq_alloc_generic_chip("mxc-avic", 1, irq_start, avic_base,
handle_level_irq);
@@ -161,7 +170,7 @@
if (nivector == 0xffff)
break;
- handle_IRQ(nivector, regs);
+ handle_IRQ(irq_find_mapping(domain, nivector), regs);
} while (1);
}
@@ -172,6 +181,8 @@
*/
void __init mxc_init_irq(void __iomem *irqbase)
{
+ struct device_node *np;
+ int irq_base;
int i;
avic_base = irqbase;
@@ -190,8 +201,16 @@
__raw_writel(0, avic_base + AVIC_INTTYPEH);
__raw_writel(0, avic_base + AVIC_INTTYPEL);
- for (i = 0; i < AVIC_NUM_IRQS; i += 32)
- avic_init_gc(i);
+ irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id());
+ WARN_ON(irq_base < 0);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,avic");
+ domain = irq_domain_add_legacy(np, AVIC_NUM_IRQS, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ WARN_ON(!domain);
+
+ for (i = 0; i < AVIC_NUM_IRQS / 32; i++, irq_base += 32)
+ avic_init_gc(i, irq_base);
/* Set default priority value (0) for all IRQ's */
for (i = 0; i < 8; i++)
@@ -199,7 +218,7 @@
#ifdef CONFIG_FIQ
/* Initialize FIQ */
- init_FIQ();
+ init_FIQ(FIQ_START);
#endif
printk(KERN_INFO "MXC IRQ initialized\n");
diff --git a/arch/arm/plat-mxc/devices/platform-ipu-core.c b/arch/arm/plat-mxc/devices/platform-ipu-core.c
index 79d340a..d1e33cc 100644
--- a/arch/arm/plat-mxc/devices/platform-ipu-core.c
+++ b/arch/arm/plat-mxc/devices/platform-ipu-core.c
@@ -30,8 +30,7 @@
static struct platform_device *imx_ipu_coredev __initdata;
struct platform_device *__init imx_add_ipu_core(
- const struct imx_ipu_core_data *data,
- const struct ipu_platform_data *pdata)
+ const struct imx_ipu_core_data *data)
{
/* The resource order is important! */
struct resource res[] = {
@@ -55,7 +54,7 @@
};
return imx_ipu_coredev = imx_add_platform_device("ipu-core", -1,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+ res, ARRAY_SIZE(res), NULL, 0);
}
struct platform_device *__init imx_alloc_mx3_camera(
diff --git a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
index a384fdd..9fd6cb3 100644
--- a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
+++ b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
@@ -13,6 +13,6 @@
#ifndef __ASM_ARCH_MXC_3DS_DB_H__
#define __ASM_ARCH_MXC_3DS_DB_H__
-extern int __init mxc_expio_init(u32 base, u32 p_irq);
+extern int __init mxc_expio_init(u32 base, u32 intr_gpio);
#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index 1b2258d..a7f5bb1 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -183,7 +183,6 @@
const struct imx_imx_udc_data *data,
const struct imxusb_platform_data *pdata);
-#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/mx3_camera.h>
struct imx_ipu_core_data {
@@ -192,8 +191,7 @@
resource_size_t errirq;
};
struct platform_device *__init imx_add_ipu_core(
- const struct imx_ipu_core_data *data,
- const struct ipu_platform_data *pdata);
+ const struct imx_ipu_core_data *data);
struct platform_device *__init imx_alloc_mx3_camera(
const struct imx_ipu_core_data *data,
const struct mx3_camera_pdata *pdata);
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 0630513..1d432a7 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -128,6 +128,4 @@
/* range e.g. GPIO_1_5 is gpio 5 under linux */
#define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr))
-#define IMX_GPIO_TO_IRQ(gpio) (MXC_GPIO_IRQ_START + (gpio))
-
#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 63f22a0..d8b65b5 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -160,9 +160,6 @@
#define IOMUX_TO_GPIO(iomux_pin) \
((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT)
-#define IOMUX_TO_IRQ(iomux_pin) \
- (((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \
- MXC_GPIO_IRQ_START)
/*
* This enumeration is constructed based on the Section
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h
index f7d1804..02651a4 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v1.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h
@@ -85,13 +85,6 @@
#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT)
#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT)
-#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x)
-#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
-#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x)
-#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x)
-
extern int mxc_gpio_mode(int gpio_mode);
extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
const char *label);
diff --git a/arch/arm/plat-mxc/include/mach/ipu.h b/arch/arm/plat-mxc/include/mach/ipu.h
index a9221f1..539e559 100644
--- a/arch/arm/plat-mxc/include/mach/ipu.h
+++ b/arch/arm/plat-mxc/include/mach/ipu.h
@@ -110,10 +110,6 @@
IPU_ROTATE_90_LEFT = 7,
};
-struct ipu_platform_data {
- unsigned int irq_base;
-};
-
/*
* Enumeration of DI ports for ADC.
*/
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index fd9efb0..d73f5e8 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -11,50 +11,6 @@
#ifndef __ASM_ARCH_MXC_IRQS_H__
#define __ASM_ARCH_MXC_IRQS_H__
-#include <asm-generic/gpio.h>
-
-/*
- * SoCs with GIC interrupt controller have 160 IRQs, those with TZIC
- * have 128 IRQs, and those with AVIC have 64.
- *
- * To support single image, the biggest number should be defined on
- * top of the list.
- */
-#if defined CONFIG_ARM_GIC
-#define MXC_INTERNAL_IRQS 160
-#elif defined CONFIG_MXC_TZIC
-#define MXC_INTERNAL_IRQS 128
-#else
-#define MXC_INTERNAL_IRQS 64
-#endif
-
-#define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS
-
-/*
- * The next 16 interrupts are for board specific purposes. Since
- * the kernel can only run on one machine at a time, we can re-use
- * these. If you need more, increase MXC_BOARD_IRQS, but keep it
- * within sensible limits.
- */
-#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + ARCH_NR_GPIOS)
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-#define MXC_BOARD_IRQS 80
-#else
-#define MXC_BOARD_IRQS 16
-#endif
-
-#define MXC_IPU_IRQ_START (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
-
-#ifdef CONFIG_MX3_IPU_IRQS
-#define MX3_IPU_IRQS CONFIG_MX3_IPU_IRQS
-#else
-#define MX3_IPU_IRQS 0
-#endif
-/* REVISIT: Add IPU irqs on IMX51 */
-
-#define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS)
-
extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
/* all normal IRQs can be FIQs */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 2b7c08d..45bd31c 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -78,61 +78,62 @@
#define MX1_IO_ADDRESS(x) IOMEM(MX1_IO_P2V(x))
/* fixed interrput numbers */
-#define MX1_INT_SOFTINT 0
-#define MX1_INT_CSI 6
-#define MX1_DSPA_MAC_INT 7
-#define MX1_DSPA_INT 8
-#define MX1_COMP_INT 9
-#define MX1_MSHC_XINT 10
-#define MX1_GPIO_INT_PORTA 11
-#define MX1_GPIO_INT_PORTB 12
-#define MX1_GPIO_INT_PORTC 13
-#define MX1_INT_LCDC 14
-#define MX1_SIM_INT 15
-#define MX1_SIM_DATA_INT 16
-#define MX1_RTC_INT 17
-#define MX1_RTC_SAMINT 18
-#define MX1_INT_UART2PFERR 19
-#define MX1_INT_UART2RTS 20
-#define MX1_INT_UART2DTR 21
-#define MX1_INT_UART2UARTC 22
-#define MX1_INT_UART2TX 23
-#define MX1_INT_UART2RX 24
-#define MX1_INT_UART1PFERR 25
-#define MX1_INT_UART1RTS 26
-#define MX1_INT_UART1DTR 27
-#define MX1_INT_UART1UARTC 28
-#define MX1_INT_UART1TX 29
-#define MX1_INT_UART1RX 30
-#define MX1_VOICE_DAC_INT 31
-#define MX1_VOICE_ADC_INT 32
-#define MX1_PEN_DATA_INT 33
-#define MX1_PWM_INT 34
-#define MX1_SDHC_INT 35
-#define MX1_INT_I2C 39
-#define MX1_INT_CSPI2 40
-#define MX1_INT_CSPI1 41
-#define MX1_SSI_TX_INT 42
-#define MX1_SSI_TX_ERR_INT 43
-#define MX1_SSI_RX_INT 44
-#define MX1_SSI_RX_ERR_INT 45
-#define MX1_TOUCH_INT 46
-#define MX1_INT_USBD0 47
-#define MX1_INT_USBD1 48
-#define MX1_INT_USBD2 49
-#define MX1_INT_USBD3 50
-#define MX1_INT_USBD4 51
-#define MX1_INT_USBD5 52
-#define MX1_INT_USBD6 53
-#define MX1_BTSYS_INT 55
-#define MX1_BTTIM_INT 56
-#define MX1_BTWUI_INT 57
-#define MX1_TIM2_INT 58
-#define MX1_TIM1_INT 59
-#define MX1_DMA_ERR 60
-#define MX1_DMA_INT 61
-#define MX1_GPIO_INT_PORTD 62
-#define MX1_WDT_INT 63
+#include <asm/irq.h>
+#define MX1_INT_SOFTINT (NR_IRQS_LEGACY + 0)
+#define MX1_INT_CSI (NR_IRQS_LEGACY + 6)
+#define MX1_DSPA_MAC_INT (NR_IRQS_LEGACY + 7)
+#define MX1_DSPA_INT (NR_IRQS_LEGACY + 8)
+#define MX1_COMP_INT (NR_IRQS_LEGACY + 9)
+#define MX1_MSHC_XINT (NR_IRQS_LEGACY + 10)
+#define MX1_GPIO_INT_PORTA (NR_IRQS_LEGACY + 11)
+#define MX1_GPIO_INT_PORTB (NR_IRQS_LEGACY + 12)
+#define MX1_GPIO_INT_PORTC (NR_IRQS_LEGACY + 13)
+#define MX1_INT_LCDC (NR_IRQS_LEGACY + 14)
+#define MX1_SIM_INT (NR_IRQS_LEGACY + 15)
+#define MX1_SIM_DATA_INT (NR_IRQS_LEGACY + 16)
+#define MX1_RTC_INT (NR_IRQS_LEGACY + 17)
+#define MX1_RTC_SAMINT (NR_IRQS_LEGACY + 18)
+#define MX1_INT_UART2PFERR (NR_IRQS_LEGACY + 19)
+#define MX1_INT_UART2RTS (NR_IRQS_LEGACY + 20)
+#define MX1_INT_UART2DTR (NR_IRQS_LEGACY + 21)
+#define MX1_INT_UART2UARTC (NR_IRQS_LEGACY + 22)
+#define MX1_INT_UART2TX (NR_IRQS_LEGACY + 23)
+#define MX1_INT_UART2RX (NR_IRQS_LEGACY + 24)
+#define MX1_INT_UART1PFERR (NR_IRQS_LEGACY + 25)
+#define MX1_INT_UART1RTS (NR_IRQS_LEGACY + 26)
+#define MX1_INT_UART1DTR (NR_IRQS_LEGACY + 27)
+#define MX1_INT_UART1UARTC (NR_IRQS_LEGACY + 28)
+#define MX1_INT_UART1TX (NR_IRQS_LEGACY + 29)
+#define MX1_INT_UART1RX (NR_IRQS_LEGACY + 30)
+#define MX1_VOICE_DAC_INT (NR_IRQS_LEGACY + 31)
+#define MX1_VOICE_ADC_INT (NR_IRQS_LEGACY + 32)
+#define MX1_PEN_DATA_INT (NR_IRQS_LEGACY + 33)
+#define MX1_PWM_INT (NR_IRQS_LEGACY + 34)
+#define MX1_SDHC_INT (NR_IRQS_LEGACY + 35)
+#define MX1_INT_I2C (NR_IRQS_LEGACY + 39)
+#define MX1_INT_CSPI2 (NR_IRQS_LEGACY + 40)
+#define MX1_INT_CSPI1 (NR_IRQS_LEGACY + 41)
+#define MX1_SSI_TX_INT (NR_IRQS_LEGACY + 42)
+#define MX1_SSI_TX_ERR_INT (NR_IRQS_LEGACY + 43)
+#define MX1_SSI_RX_INT (NR_IRQS_LEGACY + 44)
+#define MX1_SSI_RX_ERR_INT (NR_IRQS_LEGACY + 45)
+#define MX1_TOUCH_INT (NR_IRQS_LEGACY + 46)
+#define MX1_INT_USBD0 (NR_IRQS_LEGACY + 47)
+#define MX1_INT_USBD1 (NR_IRQS_LEGACY + 48)
+#define MX1_INT_USBD2 (NR_IRQS_LEGACY + 49)
+#define MX1_INT_USBD3 (NR_IRQS_LEGACY + 50)
+#define MX1_INT_USBD4 (NR_IRQS_LEGACY + 51)
+#define MX1_INT_USBD5 (NR_IRQS_LEGACY + 52)
+#define MX1_INT_USBD6 (NR_IRQS_LEGACY + 53)
+#define MX1_BTSYS_INT (NR_IRQS_LEGACY + 55)
+#define MX1_BTTIM_INT (NR_IRQS_LEGACY + 56)
+#define MX1_BTWUI_INT (NR_IRQS_LEGACY + 57)
+#define MX1_TIM2_INT (NR_IRQS_LEGACY + 58)
+#define MX1_TIM1_INT (NR_IRQS_LEGACY + 59)
+#define MX1_DMA_ERR (NR_IRQS_LEGACY + 60)
+#define MX1_DMA_INT (NR_IRQS_LEGACY + 61)
+#define MX1_GPIO_INT_PORTD (NR_IRQS_LEGACY + 62)
+#define MX1_WDT_INT (NR_IRQS_LEGACY + 63)
/* DMA */
#define MX1_DMA_REQ_UART3_T 2
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index 6cd049e..468738a 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -99,59 +99,60 @@
#define MX21_IO_ADDRESS(x) IOMEM(MX21_IO_P2V(x))
/* fixed interrupt numbers */
-#define MX21_INT_CSPI3 6
-#define MX21_INT_GPIO 8
-#define MX21_INT_FIRI 9
-#define MX21_INT_SDHC2 10
-#define MX21_INT_SDHC1 11
-#define MX21_INT_I2C 12
-#define MX21_INT_SSI2 13
-#define MX21_INT_SSI1 14
-#define MX21_INT_CSPI2 15
-#define MX21_INT_CSPI1 16
-#define MX21_INT_UART4 17
-#define MX21_INT_UART3 18
-#define MX21_INT_UART2 19
-#define MX21_INT_UART1 20
-#define MX21_INT_KPP 21
-#define MX21_INT_RTC 22
-#define MX21_INT_PWM 23
-#define MX21_INT_GPT3 24
-#define MX21_INT_GPT2 25
-#define MX21_INT_GPT1 26
-#define MX21_INT_WDOG 27
-#define MX21_INT_PCMCIA 28
-#define MX21_INT_NFC 29
-#define MX21_INT_BMI 30
-#define MX21_INT_CSI 31
-#define MX21_INT_DMACH0 32
-#define MX21_INT_DMACH1 33
-#define MX21_INT_DMACH2 34
-#define MX21_INT_DMACH3 35
-#define MX21_INT_DMACH4 36
-#define MX21_INT_DMACH5 37
-#define MX21_INT_DMACH6 38
-#define MX21_INT_DMACH7 39
-#define MX21_INT_DMACH8 40
-#define MX21_INT_DMACH9 41
-#define MX21_INT_DMACH10 42
-#define MX21_INT_DMACH11 43
-#define MX21_INT_DMACH12 44
-#define MX21_INT_DMACH13 45
-#define MX21_INT_DMACH14 46
-#define MX21_INT_DMACH15 47
-#define MX21_INT_EMMAENC 49
-#define MX21_INT_EMMADEC 50
-#define MX21_INT_EMMAPRP 51
-#define MX21_INT_EMMAPP 52
-#define MX21_INT_USBWKUP 53
-#define MX21_INT_USBDMA 54
-#define MX21_INT_USBHOST 55
-#define MX21_INT_USBFUNC 56
-#define MX21_INT_USBMNP 57
-#define MX21_INT_USBCTRL 58
-#define MX21_INT_SLCDC 60
-#define MX21_INT_LCDC 61
+#include <asm/irq.h>
+#define MX21_INT_CSPI3 (NR_IRQS_LEGACY + 6)
+#define MX21_INT_GPIO (NR_IRQS_LEGACY + 8)
+#define MX21_INT_FIRI (NR_IRQS_LEGACY + 9)
+#define MX21_INT_SDHC2 (NR_IRQS_LEGACY + 10)
+#define MX21_INT_SDHC1 (NR_IRQS_LEGACY + 11)
+#define MX21_INT_I2C (NR_IRQS_LEGACY + 12)
+#define MX21_INT_SSI2 (NR_IRQS_LEGACY + 13)
+#define MX21_INT_SSI1 (NR_IRQS_LEGACY + 14)
+#define MX21_INT_CSPI2 (NR_IRQS_LEGACY + 15)
+#define MX21_INT_CSPI1 (NR_IRQS_LEGACY + 16)
+#define MX21_INT_UART4 (NR_IRQS_LEGACY + 17)
+#define MX21_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX21_INT_UART2 (NR_IRQS_LEGACY + 19)
+#define MX21_INT_UART1 (NR_IRQS_LEGACY + 20)
+#define MX21_INT_KPP (NR_IRQS_LEGACY + 21)
+#define MX21_INT_RTC (NR_IRQS_LEGACY + 22)
+#define MX21_INT_PWM (NR_IRQS_LEGACY + 23)
+#define MX21_INT_GPT3 (NR_IRQS_LEGACY + 24)
+#define MX21_INT_GPT2 (NR_IRQS_LEGACY + 25)
+#define MX21_INT_GPT1 (NR_IRQS_LEGACY + 26)
+#define MX21_INT_WDOG (NR_IRQS_LEGACY + 27)
+#define MX21_INT_PCMCIA (NR_IRQS_LEGACY + 28)
+#define MX21_INT_NFC (NR_IRQS_LEGACY + 29)
+#define MX21_INT_BMI (NR_IRQS_LEGACY + 30)
+#define MX21_INT_CSI (NR_IRQS_LEGACY + 31)
+#define MX21_INT_DMACH0 (NR_IRQS_LEGACY + 32)
+#define MX21_INT_DMACH1 (NR_IRQS_LEGACY + 33)
+#define MX21_INT_DMACH2 (NR_IRQS_LEGACY + 34)
+#define MX21_INT_DMACH3 (NR_IRQS_LEGACY + 35)
+#define MX21_INT_DMACH4 (NR_IRQS_LEGACY + 36)
+#define MX21_INT_DMACH5 (NR_IRQS_LEGACY + 37)
+#define MX21_INT_DMACH6 (NR_IRQS_LEGACY + 38)
+#define MX21_INT_DMACH7 (NR_IRQS_LEGACY + 39)
+#define MX21_INT_DMACH8 (NR_IRQS_LEGACY + 40)
+#define MX21_INT_DMACH9 (NR_IRQS_LEGACY + 41)
+#define MX21_INT_DMACH10 (NR_IRQS_LEGACY + 42)
+#define MX21_INT_DMACH11 (NR_IRQS_LEGACY + 43)
+#define MX21_INT_DMACH12 (NR_IRQS_LEGACY + 44)
+#define MX21_INT_DMACH13 (NR_IRQS_LEGACY + 45)
+#define MX21_INT_DMACH14 (NR_IRQS_LEGACY + 46)
+#define MX21_INT_DMACH15 (NR_IRQS_LEGACY + 47)
+#define MX21_INT_EMMAENC (NR_IRQS_LEGACY + 49)
+#define MX21_INT_EMMADEC (NR_IRQS_LEGACY + 50)
+#define MX21_INT_EMMAPRP (NR_IRQS_LEGACY + 51)
+#define MX21_INT_EMMAPP (NR_IRQS_LEGACY + 52)
+#define MX21_INT_USBWKUP (NR_IRQS_LEGACY + 53)
+#define MX21_INT_USBDMA (NR_IRQS_LEGACY + 54)
+#define MX21_INT_USBHOST (NR_IRQS_LEGACY + 55)
+#define MX21_INT_USBFUNC (NR_IRQS_LEGACY + 56)
+#define MX21_INT_USBMNP (NR_IRQS_LEGACY + 57)
+#define MX21_INT_USBCTRL (NR_IRQS_LEGACY + 58)
+#define MX21_INT_SLCDC (NR_IRQS_LEGACY + 60)
+#define MX21_INT_LCDC (NR_IRQS_LEGACY + 61)
/* fixed DMA request numbers */
#define MX21_DMA_REQ_CSPI3_RX 1
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index ccebf5b..627d94f 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -61,40 +61,44 @@
#define MX25_IO_P2V(x) IMX_IO_P2V(x)
#define MX25_IO_ADDRESS(x) IOMEM(MX25_IO_P2V(x))
-#define MX25_INT_CSPI3 0
-#define MX25_INT_I2C1 3
-#define MX25_INT_I2C2 4
-#define MX25_INT_UART4 5
-#define MX25_INT_ESDHC2 8
-#define MX25_INT_ESDHC1 9
-#define MX25_INT_I2C3 10
-#define MX25_INT_SSI2 11
-#define MX25_INT_SSI1 12
-#define MX25_INT_CSPI2 13
-#define MX25_INT_CSPI1 14
-#define MX25_INT_GPIO3 16
-#define MX25_INT_CSI 17
-#define MX25_INT_UART3 18
-#define MX25_INT_GPIO4 23
-#define MX25_INT_KPP 24
-#define MX25_INT_DRYICE 25
-#define MX25_INT_PWM1 26
-#define MX25_INT_UART2 32
-#define MX25_INT_NFC 33
-#define MX25_INT_SDMA 34
-#define MX25_INT_USB_HS 35
-#define MX25_INT_PWM2 36
-#define MX25_INT_USB_OTG 37
-#define MX25_INT_LCDC 39
-#define MX25_INT_UART5 40
-#define MX25_INT_PWM3 41
-#define MX25_INT_PWM4 42
-#define MX25_INT_CAN1 43
-#define MX25_INT_CAN2 44
-#define MX25_INT_UART1 45
-#define MX25_INT_GPIO2 51
-#define MX25_INT_GPIO1 52
-#define MX25_INT_FEC 57
+/*
+ * Interrupt numbers
+ */
+#include <asm/irq.h>
+#define MX25_INT_CSPI3 (NR_IRQS_LEGACY + 0)
+#define MX25_INT_I2C1 (NR_IRQS_LEGACY + 3)
+#define MX25_INT_I2C2 (NR_IRQS_LEGACY + 4)
+#define MX25_INT_UART4 (NR_IRQS_LEGACY + 5)
+#define MX25_INT_ESDHC2 (NR_IRQS_LEGACY + 8)
+#define MX25_INT_ESDHC1 (NR_IRQS_LEGACY + 9)
+#define MX25_INT_I2C3 (NR_IRQS_LEGACY + 10)
+#define MX25_INT_SSI2 (NR_IRQS_LEGACY + 11)
+#define MX25_INT_SSI1 (NR_IRQS_LEGACY + 12)
+#define MX25_INT_CSPI2 (NR_IRQS_LEGACY + 13)
+#define MX25_INT_CSPI1 (NR_IRQS_LEGACY + 14)
+#define MX25_INT_GPIO3 (NR_IRQS_LEGACY + 16)
+#define MX25_INT_CSI (NR_IRQS_LEGACY + 17)
+#define MX25_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX25_INT_GPIO4 (NR_IRQS_LEGACY + 23)
+#define MX25_INT_KPP (NR_IRQS_LEGACY + 24)
+#define MX25_INT_DRYICE (NR_IRQS_LEGACY + 25)
+#define MX25_INT_PWM1 (NR_IRQS_LEGACY + 26)
+#define MX25_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX25_INT_NFC (NR_IRQS_LEGACY + 33)
+#define MX25_INT_SDMA (NR_IRQS_LEGACY + 34)
+#define MX25_INT_USB_HS (NR_IRQS_LEGACY + 35)
+#define MX25_INT_PWM2 (NR_IRQS_LEGACY + 36)
+#define MX25_INT_USB_OTG (NR_IRQS_LEGACY + 37)
+#define MX25_INT_LCDC (NR_IRQS_LEGACY + 39)
+#define MX25_INT_UART5 (NR_IRQS_LEGACY + 40)
+#define MX25_INT_PWM3 (NR_IRQS_LEGACY + 41)
+#define MX25_INT_PWM4 (NR_IRQS_LEGACY + 42)
+#define MX25_INT_CAN1 (NR_IRQS_LEGACY + 43)
+#define MX25_INT_CAN2 (NR_IRQS_LEGACY + 44)
+#define MX25_INT_UART1 (NR_IRQS_LEGACY + 45)
+#define MX25_INT_GPIO2 (NR_IRQS_LEGACY + 51)
+#define MX25_INT_GPIO1 (NR_IRQS_LEGACY + 52)
+#define MX25_INT_FEC (NR_IRQS_LEGACY + 57)
#define MX25_DMA_REQ_SSI2_RX1 22
#define MX25_DMA_REQ_SSI2_TX1 23
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 6265357..e074616 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -128,69 +128,70 @@
#define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x))
/* fixed interrupt numbers */
-#define MX27_INT_I2C2 1
-#define MX27_INT_GPT6 2
-#define MX27_INT_GPT5 3
-#define MX27_INT_GPT4 4
-#define MX27_INT_RTIC 5
-#define MX27_INT_CSPI3 6
-#define MX27_INT_SDHC 7
-#define MX27_INT_GPIO 8
-#define MX27_INT_SDHC3 9
-#define MX27_INT_SDHC2 10
-#define MX27_INT_SDHC1 11
-#define MX27_INT_I2C1 12
-#define MX27_INT_SSI2 13
-#define MX27_INT_SSI1 14
-#define MX27_INT_CSPI2 15
-#define MX27_INT_CSPI1 16
-#define MX27_INT_UART4 17
-#define MX27_INT_UART3 18
-#define MX27_INT_UART2 19
-#define MX27_INT_UART1 20
-#define MX27_INT_KPP 21
-#define MX27_INT_RTC 22
-#define MX27_INT_PWM 23
-#define MX27_INT_GPT3 24
-#define MX27_INT_GPT2 25
-#define MX27_INT_GPT1 26
-#define MX27_INT_WDOG 27
-#define MX27_INT_PCMCIA 28
-#define MX27_INT_NFC 29
-#define MX27_INT_ATA 30
-#define MX27_INT_CSI 31
-#define MX27_INT_DMACH0 32
-#define MX27_INT_DMACH1 33
-#define MX27_INT_DMACH2 34
-#define MX27_INT_DMACH3 35
-#define MX27_INT_DMACH4 36
-#define MX27_INT_DMACH5 37
-#define MX27_INT_DMACH6 38
-#define MX27_INT_DMACH7 39
-#define MX27_INT_DMACH8 40
-#define MX27_INT_DMACH9 41
-#define MX27_INT_DMACH10 42
-#define MX27_INT_DMACH11 43
-#define MX27_INT_DMACH12 44
-#define MX27_INT_DMACH13 45
-#define MX27_INT_DMACH14 46
-#define MX27_INT_DMACH15 47
-#define MX27_INT_UART6 48
-#define MX27_INT_UART5 49
-#define MX27_INT_FEC 50
-#define MX27_INT_EMMAPRP 51
-#define MX27_INT_EMMAPP 52
-#define MX27_INT_VPU 53
-#define MX27_INT_USB_HS1 54
-#define MX27_INT_USB_HS2 55
-#define MX27_INT_USB_OTG 56
-#define MX27_INT_SCC_SMN 57
-#define MX27_INT_SCC_SCM 58
-#define MX27_INT_SAHARA 59
-#define MX27_INT_SLCDC 60
-#define MX27_INT_LCDC 61
-#define MX27_INT_IIM 62
-#define MX27_INT_CCM 63
+#include <asm/irq.h>
+#define MX27_INT_I2C2 (NR_IRQS_LEGACY + 1)
+#define MX27_INT_GPT6 (NR_IRQS_LEGACY + 2)
+#define MX27_INT_GPT5 (NR_IRQS_LEGACY + 3)
+#define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4)
+#define MX27_INT_RTIC (NR_IRQS_LEGACY + 5)
+#define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6)
+#define MX27_INT_SDHC (NR_IRQS_LEGACY + 7)
+#define MX27_INT_GPIO (NR_IRQS_LEGACY + 8)
+#define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9)
+#define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10)
+#define MX27_INT_SDHC1 (NR_IRQS_LEGACY + 11)
+#define MX27_INT_I2C1 (NR_IRQS_LEGACY + 12)
+#define MX27_INT_SSI2 (NR_IRQS_LEGACY + 13)
+#define MX27_INT_SSI1 (NR_IRQS_LEGACY + 14)
+#define MX27_INT_CSPI2 (NR_IRQS_LEGACY + 15)
+#define MX27_INT_CSPI1 (NR_IRQS_LEGACY + 16)
+#define MX27_INT_UART4 (NR_IRQS_LEGACY + 17)
+#define MX27_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX27_INT_UART2 (NR_IRQS_LEGACY + 19)
+#define MX27_INT_UART1 (NR_IRQS_LEGACY + 20)
+#define MX27_INT_KPP (NR_IRQS_LEGACY + 21)
+#define MX27_INT_RTC (NR_IRQS_LEGACY + 22)
+#define MX27_INT_PWM (NR_IRQS_LEGACY + 23)
+#define MX27_INT_GPT3 (NR_IRQS_LEGACY + 24)
+#define MX27_INT_GPT2 (NR_IRQS_LEGACY + 25)
+#define MX27_INT_GPT1 (NR_IRQS_LEGACY + 26)
+#define MX27_INT_WDOG (NR_IRQS_LEGACY + 27)
+#define MX27_INT_PCMCIA (NR_IRQS_LEGACY + 28)
+#define MX27_INT_NFC (NR_IRQS_LEGACY + 29)
+#define MX27_INT_ATA (NR_IRQS_LEGACY + 30)
+#define MX27_INT_CSI (NR_IRQS_LEGACY + 31)
+#define MX27_INT_DMACH0 (NR_IRQS_LEGACY + 32)
+#define MX27_INT_DMACH1 (NR_IRQS_LEGACY + 33)
+#define MX27_INT_DMACH2 (NR_IRQS_LEGACY + 34)
+#define MX27_INT_DMACH3 (NR_IRQS_LEGACY + 35)
+#define MX27_INT_DMACH4 (NR_IRQS_LEGACY + 36)
+#define MX27_INT_DMACH5 (NR_IRQS_LEGACY + 37)
+#define MX27_INT_DMACH6 (NR_IRQS_LEGACY + 38)
+#define MX27_INT_DMACH7 (NR_IRQS_LEGACY + 39)
+#define MX27_INT_DMACH8 (NR_IRQS_LEGACY + 40)
+#define MX27_INT_DMACH9 (NR_IRQS_LEGACY + 41)
+#define MX27_INT_DMACH10 (NR_IRQS_LEGACY + 42)
+#define MX27_INT_DMACH11 (NR_IRQS_LEGACY + 43)
+#define MX27_INT_DMACH12 (NR_IRQS_LEGACY + 44)
+#define MX27_INT_DMACH13 (NR_IRQS_LEGACY + 45)
+#define MX27_INT_DMACH14 (NR_IRQS_LEGACY + 46)
+#define MX27_INT_DMACH15 (NR_IRQS_LEGACY + 47)
+#define MX27_INT_UART6 (NR_IRQS_LEGACY + 48)
+#define MX27_INT_UART5 (NR_IRQS_LEGACY + 49)
+#define MX27_INT_FEC (NR_IRQS_LEGACY + 50)
+#define MX27_INT_EMMAPRP (NR_IRQS_LEGACY + 51)
+#define MX27_INT_EMMAPP (NR_IRQS_LEGACY + 52)
+#define MX27_INT_VPU (NR_IRQS_LEGACY + 53)
+#define MX27_INT_USB_HS1 (NR_IRQS_LEGACY + 54)
+#define MX27_INT_USB_HS2 (NR_IRQS_LEGACY + 55)
+#define MX27_INT_USB_OTG (NR_IRQS_LEGACY + 56)
+#define MX27_INT_SCC_SMN (NR_IRQS_LEGACY + 57)
+#define MX27_INT_SCC_SCM (NR_IRQS_LEGACY + 58)
+#define MX27_INT_SAHARA (NR_IRQS_LEGACY + 59)
+#define MX27_INT_SLCDC (NR_IRQS_LEGACY + 60)
+#define MX27_INT_LCDC (NR_IRQS_LEGACY + 61)
+#define MX27_INT_IIM (NR_IRQS_LEGACY + 62)
+#define MX27_INT_CCM (NR_IRQS_LEGACY + 63)
/* fixed DMA request numbers */
#define MX27_DMA_REQ_CSPI3_RX 1
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index 6d07839..11642f5 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -68,49 +68,50 @@
#define MX2x_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000)
/* fixed interrupt numbers */
-#define MX2x_INT_CSPI3 6
-#define MX2x_INT_GPIO 8
-#define MX2x_INT_SDHC2 10
-#define MX2x_INT_SDHC1 11
-#define MX2x_INT_I2C 12
-#define MX2x_INT_SSI2 13
-#define MX2x_INT_SSI1 14
-#define MX2x_INT_CSPI2 15
-#define MX2x_INT_CSPI1 16
-#define MX2x_INT_UART4 17
-#define MX2x_INT_UART3 18
-#define MX2x_INT_UART2 19
-#define MX2x_INT_UART1 20
-#define MX2x_INT_KPP 21
-#define MX2x_INT_RTC 22
-#define MX2x_INT_PWM 23
-#define MX2x_INT_GPT3 24
-#define MX2x_INT_GPT2 25
-#define MX2x_INT_GPT1 26
-#define MX2x_INT_WDOG 27
-#define MX2x_INT_PCMCIA 28
-#define MX2x_INT_NANDFC 29
-#define MX2x_INT_CSI 31
-#define MX2x_INT_DMACH0 32
-#define MX2x_INT_DMACH1 33
-#define MX2x_INT_DMACH2 34
-#define MX2x_INT_DMACH3 35
-#define MX2x_INT_DMACH4 36
-#define MX2x_INT_DMACH5 37
-#define MX2x_INT_DMACH6 38
-#define MX2x_INT_DMACH7 39
-#define MX2x_INT_DMACH8 40
-#define MX2x_INT_DMACH9 41
-#define MX2x_INT_DMACH10 42
-#define MX2x_INT_DMACH11 43
-#define MX2x_INT_DMACH12 44
-#define MX2x_INT_DMACH13 45
-#define MX2x_INT_DMACH14 46
-#define MX2x_INT_DMACH15 47
-#define MX2x_INT_EMMAPRP 51
-#define MX2x_INT_EMMAPP 52
-#define MX2x_INT_SLCDC 60
-#define MX2x_INT_LCDC 61
+#include <asm/irq.h>
+#define MX2x_INT_CSPI3 (NR_IRQS_LEGACY + 6)
+#define MX2x_INT_GPIO (NR_IRQS_LEGACY + 8)
+#define MX2x_INT_SDHC2 (NR_IRQS_LEGACY + 10)
+#define MX2x_INT_SDHC1 (NR_IRQS_LEGACY + 11)
+#define MX2x_INT_I2C (NR_IRQS_LEGACY + 12)
+#define MX2x_INT_SSI2 (NR_IRQS_LEGACY + 13)
+#define MX2x_INT_SSI1 (NR_IRQS_LEGACY + 14)
+#define MX2x_INT_CSPI2 (NR_IRQS_LEGACY + 15)
+#define MX2x_INT_CSPI1 (NR_IRQS_LEGACY + 16)
+#define MX2x_INT_UART4 (NR_IRQS_LEGACY + 17)
+#define MX2x_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX2x_INT_UART2 (NR_IRQS_LEGACY + 19)
+#define MX2x_INT_UART1 (NR_IRQS_LEGACY + 20)
+#define MX2x_INT_KPP (NR_IRQS_LEGACY + 21)
+#define MX2x_INT_RTC (NR_IRQS_LEGACY + 22)
+#define MX2x_INT_PWM (NR_IRQS_LEGACY + 23)
+#define MX2x_INT_GPT3 (NR_IRQS_LEGACY + 24)
+#define MX2x_INT_GPT2 (NR_IRQS_LEGACY + 25)
+#define MX2x_INT_GPT1 (NR_IRQS_LEGACY + 26)
+#define MX2x_INT_WDOG (NR_IRQS_LEGACY + 27)
+#define MX2x_INT_PCMCIA (NR_IRQS_LEGACY + 28)
+#define MX2x_INT_NANDFC (NR_IRQS_LEGACY + 29)
+#define MX2x_INT_CSI (NR_IRQS_LEGACY + 31)
+#define MX2x_INT_DMACH0 (NR_IRQS_LEGACY + 32)
+#define MX2x_INT_DMACH1 (NR_IRQS_LEGACY + 33)
+#define MX2x_INT_DMACH2 (NR_IRQS_LEGACY + 34)
+#define MX2x_INT_DMACH3 (NR_IRQS_LEGACY + 35)
+#define MX2x_INT_DMACH4 (NR_IRQS_LEGACY + 36)
+#define MX2x_INT_DMACH5 (NR_IRQS_LEGACY + 37)
+#define MX2x_INT_DMACH6 (NR_IRQS_LEGACY + 38)
+#define MX2x_INT_DMACH7 (NR_IRQS_LEGACY + 39)
+#define MX2x_INT_DMACH8 (NR_IRQS_LEGACY + 40)
+#define MX2x_INT_DMACH9 (NR_IRQS_LEGACY + 41)
+#define MX2x_INT_DMACH10 (NR_IRQS_LEGACY + 42)
+#define MX2x_INT_DMACH11 (NR_IRQS_LEGACY + 43)
+#define MX2x_INT_DMACH12 (NR_IRQS_LEGACY + 44)
+#define MX2x_INT_DMACH13 (NR_IRQS_LEGACY + 45)
+#define MX2x_INT_DMACH14 (NR_IRQS_LEGACY + 46)
+#define MX2x_INT_DMACH15 (NR_IRQS_LEGACY + 47)
+#define MX2x_INT_EMMAPRP (NR_IRQS_LEGACY + 51)
+#define MX2x_INT_EMMAPP (NR_IRQS_LEGACY + 52)
+#define MX2x_INT_SLCDC (NR_IRQS_LEGACY + 60)
+#define MX2x_INT_LCDC (NR_IRQS_LEGACY + 61)
/* fixed DMA request numbers */
#define MX2x_DMA_REQ_CSPI3_RX 1
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index e27619e..dbced61 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -118,63 +118,67 @@
#define MX31_IO_P2V(x) IMX_IO_P2V(x)
#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x))
-#define MX31_INT_I2C3 3
-#define MX31_INT_I2C2 4
-#define MX31_INT_MPEG4_ENCODER 5
-#define MX31_INT_RTIC 6
-#define MX31_INT_FIRI 7
-#define MX31_INT_SDHC2 8
-#define MX31_INT_SDHC1 9
-#define MX31_INT_I2C1 10
-#define MX31_INT_SSI2 11
-#define MX31_INT_SSI1 12
-#define MX31_INT_CSPI2 13
-#define MX31_INT_CSPI1 14
-#define MX31_INT_ATA 15
-#define MX31_INT_MBX 16
-#define MX31_INT_CSPI3 17
-#define MX31_INT_UART3 18
-#define MX31_INT_IIM 19
-#define MX31_INT_SIM2 20
-#define MX31_INT_SIM1 21
-#define MX31_INT_RNGA 22
-#define MX31_INT_EVTMON 23
-#define MX31_INT_KPP 24
-#define MX31_INT_RTC 25
-#define MX31_INT_PWM 26
-#define MX31_INT_EPIT2 27
-#define MX31_INT_EPIT1 28
-#define MX31_INT_GPT 29
-#define MX31_INT_POWER_FAIL 30
-#define MX31_INT_CCM_DVFS 31
-#define MX31_INT_UART2 32
-#define MX31_INT_NFC 33
-#define MX31_INT_SDMA 34
-#define MX31_INT_USB_HS1 35
-#define MX31_INT_USB_HS2 36
-#define MX31_INT_USB_OTG 37
-#define MX31_INT_MSHC1 39
-#define MX31_INT_MSHC2 40
-#define MX31_INT_IPU_ERR 41
-#define MX31_INT_IPU_SYN 42
-#define MX31_INT_UART1 45
-#define MX31_INT_UART4 46
-#define MX31_INT_UART5 47
-#define MX31_INT_ECT 48
-#define MX31_INT_SCC_SCM 49
-#define MX31_INT_SCC_SMN 50
-#define MX31_INT_GPIO2 51
-#define MX31_INT_GPIO1 52
-#define MX31_INT_CCM 53
-#define MX31_INT_PCMCIA 54
-#define MX31_INT_WDOG 55
-#define MX31_INT_GPIO3 56
-#define MX31_INT_EXT_POWER 58
-#define MX31_INT_EXT_TEMPER 59
-#define MX31_INT_EXT_SENSOR60 60
-#define MX31_INT_EXT_SENSOR61 61
-#define MX31_INT_EXT_WDOG 62
-#define MX31_INT_EXT_TV 63
+/*
+ * Interrupt numbers
+ */
+#include <asm/irq.h>
+#define MX31_INT_I2C3 (NR_IRQS_LEGACY + 3)
+#define MX31_INT_I2C2 (NR_IRQS_LEGACY + 4)
+#define MX31_INT_MPEG4_ENCODER (NR_IRQS_LEGACY + 5)
+#define MX31_INT_RTIC (NR_IRQS_LEGACY + 6)
+#define MX31_INT_FIRI (NR_IRQS_LEGACY + 7)
+#define MX31_INT_SDHC2 (NR_IRQS_LEGACY + 8)
+#define MX31_INT_SDHC1 (NR_IRQS_LEGACY + 9)
+#define MX31_INT_I2C1 (NR_IRQS_LEGACY + 10)
+#define MX31_INT_SSI2 (NR_IRQS_LEGACY + 11)
+#define MX31_INT_SSI1 (NR_IRQS_LEGACY + 12)
+#define MX31_INT_CSPI2 (NR_IRQS_LEGACY + 13)
+#define MX31_INT_CSPI1 (NR_IRQS_LEGACY + 14)
+#define MX31_INT_ATA (NR_IRQS_LEGACY + 15)
+#define MX31_INT_MBX (NR_IRQS_LEGACY + 16)
+#define MX31_INT_CSPI3 (NR_IRQS_LEGACY + 17)
+#define MX31_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX31_INT_IIM (NR_IRQS_LEGACY + 19)
+#define MX31_INT_SIM2 (NR_IRQS_LEGACY + 20)
+#define MX31_INT_SIM1 (NR_IRQS_LEGACY + 21)
+#define MX31_INT_RNGA (NR_IRQS_LEGACY + 22)
+#define MX31_INT_EVTMON (NR_IRQS_LEGACY + 23)
+#define MX31_INT_KPP (NR_IRQS_LEGACY + 24)
+#define MX31_INT_RTC (NR_IRQS_LEGACY + 25)
+#define MX31_INT_PWM (NR_IRQS_LEGACY + 26)
+#define MX31_INT_EPIT2 (NR_IRQS_LEGACY + 27)
+#define MX31_INT_EPIT1 (NR_IRQS_LEGACY + 28)
+#define MX31_INT_GPT (NR_IRQS_LEGACY + 29)
+#define MX31_INT_POWER_FAIL (NR_IRQS_LEGACY + 30)
+#define MX31_INT_CCM_DVFS (NR_IRQS_LEGACY + 31)
+#define MX31_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX31_INT_NFC (NR_IRQS_LEGACY + 33)
+#define MX31_INT_SDMA (NR_IRQS_LEGACY + 34)
+#define MX31_INT_USB_HS1 (NR_IRQS_LEGACY + 35)
+#define MX31_INT_USB_HS2 (NR_IRQS_LEGACY + 36)
+#define MX31_INT_USB_OTG (NR_IRQS_LEGACY + 37)
+#define MX31_INT_MSHC1 (NR_IRQS_LEGACY + 39)
+#define MX31_INT_MSHC2 (NR_IRQS_LEGACY + 40)
+#define MX31_INT_IPU_ERR (NR_IRQS_LEGACY + 41)
+#define MX31_INT_IPU_SYN (NR_IRQS_LEGACY + 42)
+#define MX31_INT_UART1 (NR_IRQS_LEGACY + 45)
+#define MX31_INT_UART4 (NR_IRQS_LEGACY + 46)
+#define MX31_INT_UART5 (NR_IRQS_LEGACY + 47)
+#define MX31_INT_ECT (NR_IRQS_LEGACY + 48)
+#define MX31_INT_SCC_SCM (NR_IRQS_LEGACY + 49)
+#define MX31_INT_SCC_SMN (NR_IRQS_LEGACY + 50)
+#define MX31_INT_GPIO2 (NR_IRQS_LEGACY + 51)
+#define MX31_INT_GPIO1 (NR_IRQS_LEGACY + 52)
+#define MX31_INT_CCM (NR_IRQS_LEGACY + 53)
+#define MX31_INT_PCMCIA (NR_IRQS_LEGACY + 54)
+#define MX31_INT_WDOG (NR_IRQS_LEGACY + 55)
+#define MX31_INT_GPIO3 (NR_IRQS_LEGACY + 56)
+#define MX31_INT_EXT_POWER (NR_IRQS_LEGACY + 58)
+#define MX31_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59)
+#define MX31_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60)
+#define MX31_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61)
+#define MX31_INT_EXT_WDOG (NR_IRQS_LEGACY + 62)
+#define MX31_INT_EXT_TV (NR_IRQS_LEGACY + 63)
#define MX31_DMA_REQ_SDHC1 20
#define MX31_DMA_REQ_SDHC2 21
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 80965a9..2af5d3a 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -120,60 +120,61 @@
/*
* Interrupt numbers
*/
-#define MX35_INT_OWIRE 2
-#define MX35_INT_I2C3 3
-#define MX35_INT_I2C2 4
-#define MX35_INT_RTIC 6
-#define MX35_INT_ESDHC1 7
-#define MX35_INT_ESDHC2 8
-#define MX35_INT_ESDHC3 9
-#define MX35_INT_I2C1 10
-#define MX35_INT_SSI1 11
-#define MX35_INT_SSI2 12
-#define MX35_INT_CSPI2 13
-#define MX35_INT_CSPI1 14
-#define MX35_INT_ATA 15
-#define MX35_INT_GPU2D 16
-#define MX35_INT_ASRC 17
-#define MX35_INT_UART3 18
-#define MX35_INT_IIM 19
-#define MX35_INT_RNGA 22
-#define MX35_INT_EVTMON 23
-#define MX35_INT_KPP 24
-#define MX35_INT_RTC 25
-#define MX35_INT_PWM 26
-#define MX35_INT_EPIT2 27
-#define MX35_INT_EPIT1 28
-#define MX35_INT_GPT 29
-#define MX35_INT_POWER_FAIL 30
-#define MX35_INT_UART2 32
-#define MX35_INT_NFC 33
-#define MX35_INT_SDMA 34
-#define MX35_INT_USB_HS 35
-#define MX35_INT_USB_OTG 37
-#define MX35_INT_MSHC1 39
-#define MX35_INT_ESAI 40
-#define MX35_INT_IPU_ERR 41
-#define MX35_INT_IPU_SYN 42
-#define MX35_INT_CAN1 43
-#define MX35_INT_CAN2 44
-#define MX35_INT_UART1 45
-#define MX35_INT_MLB 46
-#define MX35_INT_SPDIF 47
-#define MX35_INT_ECT 48
-#define MX35_INT_SCC_SCM 49
-#define MX35_INT_SCC_SMN 50
-#define MX35_INT_GPIO2 51
-#define MX35_INT_GPIO1 52
-#define MX35_INT_WDOG 55
-#define MX35_INT_GPIO3 56
-#define MX35_INT_FEC 57
-#define MX35_INT_EXT_POWER 58
-#define MX35_INT_EXT_TEMPER 59
-#define MX35_INT_EXT_SENSOR60 60
-#define MX35_INT_EXT_SENSOR61 61
-#define MX35_INT_EXT_WDOG 62
-#define MX35_INT_EXT_TV 63
+#include <asm/irq.h>
+#define MX35_INT_OWIRE (NR_IRQS_LEGACY + 2)
+#define MX35_INT_I2C3 (NR_IRQS_LEGACY + 3)
+#define MX35_INT_I2C2 (NR_IRQS_LEGACY + 4)
+#define MX35_INT_RTIC (NR_IRQS_LEGACY + 6)
+#define MX35_INT_ESDHC1 (NR_IRQS_LEGACY + 7)
+#define MX35_INT_ESDHC2 (NR_IRQS_LEGACY + 8)
+#define MX35_INT_ESDHC3 (NR_IRQS_LEGACY + 9)
+#define MX35_INT_I2C1 (NR_IRQS_LEGACY + 10)
+#define MX35_INT_SSI1 (NR_IRQS_LEGACY + 11)
+#define MX35_INT_SSI2 (NR_IRQS_LEGACY + 12)
+#define MX35_INT_CSPI2 (NR_IRQS_LEGACY + 13)
+#define MX35_INT_CSPI1 (NR_IRQS_LEGACY + 14)
+#define MX35_INT_ATA (NR_IRQS_LEGACY + 15)
+#define MX35_INT_GPU2D (NR_IRQS_LEGACY + 16)
+#define MX35_INT_ASRC (NR_IRQS_LEGACY + 17)
+#define MX35_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX35_INT_IIM (NR_IRQS_LEGACY + 19)
+#define MX35_INT_RNGA (NR_IRQS_LEGACY + 22)
+#define MX35_INT_EVTMON (NR_IRQS_LEGACY + 23)
+#define MX35_INT_KPP (NR_IRQS_LEGACY + 24)
+#define MX35_INT_RTC (NR_IRQS_LEGACY + 25)
+#define MX35_INT_PWM (NR_IRQS_LEGACY + 26)
+#define MX35_INT_EPIT2 (NR_IRQS_LEGACY + 27)
+#define MX35_INT_EPIT1 (NR_IRQS_LEGACY + 28)
+#define MX35_INT_GPT (NR_IRQS_LEGACY + 29)
+#define MX35_INT_POWER_FAIL (NR_IRQS_LEGACY + 30)
+#define MX35_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX35_INT_NFC (NR_IRQS_LEGACY + 33)
+#define MX35_INT_SDMA (NR_IRQS_LEGACY + 34)
+#define MX35_INT_USB_HS (NR_IRQS_LEGACY + 35)
+#define MX35_INT_USB_OTG (NR_IRQS_LEGACY + 37)
+#define MX35_INT_MSHC1 (NR_IRQS_LEGACY + 39)
+#define MX35_INT_ESAI (NR_IRQS_LEGACY + 40)
+#define MX35_INT_IPU_ERR (NR_IRQS_LEGACY + 41)
+#define MX35_INT_IPU_SYN (NR_IRQS_LEGACY + 42)
+#define MX35_INT_CAN1 (NR_IRQS_LEGACY + 43)
+#define MX35_INT_CAN2 (NR_IRQS_LEGACY + 44)
+#define MX35_INT_UART1 (NR_IRQS_LEGACY + 45)
+#define MX35_INT_MLB (NR_IRQS_LEGACY + 46)
+#define MX35_INT_SPDIF (NR_IRQS_LEGACY + 47)
+#define MX35_INT_ECT (NR_IRQS_LEGACY + 48)
+#define MX35_INT_SCC_SCM (NR_IRQS_LEGACY + 49)
+#define MX35_INT_SCC_SMN (NR_IRQS_LEGACY + 50)
+#define MX35_INT_GPIO2 (NR_IRQS_LEGACY + 51)
+#define MX35_INT_GPIO1 (NR_IRQS_LEGACY + 52)
+#define MX35_INT_WDOG (NR_IRQS_LEGACY + 55)
+#define MX35_INT_GPIO3 (NR_IRQS_LEGACY + 56)
+#define MX35_INT_FEC (NR_IRQS_LEGACY + 57)
+#define MX35_INT_EXT_POWER (NR_IRQS_LEGACY + 58)
+#define MX35_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59)
+#define MX35_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60)
+#define MX35_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61)
+#define MX35_INT_EXT_WDOG (NR_IRQS_LEGACY + 62)
+#define MX35_INT_EXT_TV (NR_IRQS_LEGACY + 63)
#define MX35_DMA_REQ_SSI2_RX1 22
#define MX35_DMA_REQ_SSI2_TX1 23
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 30dbf42..96fb4fb 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -143,44 +143,45 @@
/*
* Interrupt numbers
*/
-#define MX3x_INT_I2C3 3
-#define MX3x_INT_I2C2 4
-#define MX3x_INT_RTIC 6
-#define MX3x_INT_I2C 10
-#define MX3x_INT_CSPI2 13
-#define MX3x_INT_CSPI1 14
-#define MX3x_INT_ATA 15
-#define MX3x_INT_UART3 18
-#define MX3x_INT_IIM 19
-#define MX3x_INT_RNGA 22
-#define MX3x_INT_EVTMON 23
-#define MX3x_INT_KPP 24
-#define MX3x_INT_RTC 25
-#define MX3x_INT_PWM 26
-#define MX3x_INT_EPIT2 27
-#define MX3x_INT_EPIT1 28
-#define MX3x_INT_GPT 29
-#define MX3x_INT_POWER_FAIL 30
-#define MX3x_INT_UART2 32
-#define MX3x_INT_NANDFC 33
-#define MX3x_INT_SDMA 34
-#define MX3x_INT_MSHC1 39
-#define MX3x_INT_IPU_ERR 41
-#define MX3x_INT_IPU_SYN 42
-#define MX3x_INT_UART1 45
-#define MX3x_INT_ECT 48
-#define MX3x_INT_SCC_SCM 49
-#define MX3x_INT_SCC_SMN 50
-#define MX3x_INT_GPIO2 51
-#define MX3x_INT_GPIO1 52
-#define MX3x_INT_WDOG 55
-#define MX3x_INT_GPIO3 56
-#define MX3x_INT_EXT_POWER 58
-#define MX3x_INT_EXT_TEMPER 59
-#define MX3x_INT_EXT_SENSOR60 60
-#define MX3x_INT_EXT_SENSOR61 61
-#define MX3x_INT_EXT_WDOG 62
-#define MX3x_INT_EXT_TV 63
+#include <asm/irq.h>
+#define MX3x_INT_I2C3 (NR_IRQS_LEGACY + 3)
+#define MX3x_INT_I2C2 (NR_IRQS_LEGACY + 4)
+#define MX3x_INT_RTIC (NR_IRQS_LEGACY + 6)
+#define MX3x_INT_I2C (NR_IRQS_LEGACY + 10)
+#define MX3x_INT_CSPI2 (NR_IRQS_LEGACY + 13)
+#define MX3x_INT_CSPI1 (NR_IRQS_LEGACY + 14)
+#define MX3x_INT_ATA (NR_IRQS_LEGACY + 15)
+#define MX3x_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX3x_INT_IIM (NR_IRQS_LEGACY + 19)
+#define MX3x_INT_RNGA (NR_IRQS_LEGACY + 22)
+#define MX3x_INT_EVTMON (NR_IRQS_LEGACY + 23)
+#define MX3x_INT_KPP (NR_IRQS_LEGACY + 24)
+#define MX3x_INT_RTC (NR_IRQS_LEGACY + 25)
+#define MX3x_INT_PWM (NR_IRQS_LEGACY + 26)
+#define MX3x_INT_EPIT2 (NR_IRQS_LEGACY + 27)
+#define MX3x_INT_EPIT1 (NR_IRQS_LEGACY + 28)
+#define MX3x_INT_GPT (NR_IRQS_LEGACY + 29)
+#define MX3x_INT_POWER_FAIL (NR_IRQS_LEGACY + 30)
+#define MX3x_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX3x_INT_NANDFC (NR_IRQS_LEGACY + 33)
+#define MX3x_INT_SDMA (NR_IRQS_LEGACY + 34)
+#define MX3x_INT_MSHC1 (NR_IRQS_LEGACY + 39)
+#define MX3x_INT_IPU_ERR (NR_IRQS_LEGACY + 41)
+#define MX3x_INT_IPU_SYN (NR_IRQS_LEGACY + 42)
+#define MX3x_INT_UART1 (NR_IRQS_LEGACY + 45)
+#define MX3x_INT_ECT (NR_IRQS_LEGACY + 48)
+#define MX3x_INT_SCC_SCM (NR_IRQS_LEGACY + 49)
+#define MX3x_INT_SCC_SMN (NR_IRQS_LEGACY + 50)
+#define MX3x_INT_GPIO2 (NR_IRQS_LEGACY + 51)
+#define MX3x_INT_GPIO1 (NR_IRQS_LEGACY + 52)
+#define MX3x_INT_WDOG (NR_IRQS_LEGACY + 55)
+#define MX3x_INT_GPIO3 (NR_IRQS_LEGACY + 56)
+#define MX3x_INT_EXT_POWER (NR_IRQS_LEGACY + 58)
+#define MX3x_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59)
+#define MX3x_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60)
+#define MX3x_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61)
+#define MX3x_INT_EXT_WDOG (NR_IRQS_LEGACY + 62)
+#define MX3x_INT_EXT_TV (NR_IRQS_LEGACY + 63)
#define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */
diff --git a/arch/arm/plat-mxc/include/mach/mx50.h b/arch/arm/plat-mxc/include/mach/mx50.h
index 5f2da75a..09ac19c 100644
--- a/arch/arm/plat-mxc/include/mach/mx50.h
+++ b/arch/arm/plat-mxc/include/mach/mx50.h
@@ -188,99 +188,100 @@
/*
* Interrupt numbers
*/
-#define MX50_INT_MMC_SDHC1 1
-#define MX50_INT_MMC_SDHC2 2
-#define MX50_INT_MMC_SDHC3 3
-#define MX50_INT_MMC_SDHC4 4
-#define MX50_INT_DAP 5
-#define MX50_INT_SDMA 6
-#define MX50_INT_IOMUX 7
-#define MX50_INT_UART4 13
-#define MX50_INT_USB_H1 14
-#define MX50_INT_USB_OTG 18
-#define MX50_INT_DATABAHN 19
-#define MX50_INT_ELCDIF 20
-#define MX50_INT_EPXP 21
-#define MX50_INT_SRTC_NTZ 24
-#define MX50_INT_SRTC_TZ 25
-#define MX50_INT_EPDC 27
-#define MX50_INT_NIC 28
-#define MX50_INT_SSI1 29
-#define MX50_INT_SSI2 30
-#define MX50_INT_UART1 31
-#define MX50_INT_UART2 32
-#define MX50_INT_UART3 33
-#define MX50_INT_RESV34 34
-#define MX50_INT_RESV35 35
-#define MX50_INT_CSPI1 36
-#define MX50_INT_CSPI2 37
-#define MX50_INT_CSPI 38
-#define MX50_INT_GPT 39
-#define MX50_INT_EPIT1 40
-#define MX50_INT_GPIO1_INT7 42
-#define MX50_INT_GPIO1_INT6 43
-#define MX50_INT_GPIO1_INT5 44
-#define MX50_INT_GPIO1_INT4 45
-#define MX50_INT_GPIO1_INT3 46
-#define MX50_INT_GPIO1_INT2 47
-#define MX50_INT_GPIO1_INT1 48
-#define MX50_INT_GPIO1_INT0 49
-#define MX50_INT_GPIO1_LOW 50
-#define MX50_INT_GPIO1_HIGH 51
-#define MX50_INT_GPIO2_LOW 52
-#define MX50_INT_GPIO2_HIGH 53
-#define MX50_INT_GPIO3_LOW 54
-#define MX50_INT_GPIO3_HIGH 55
-#define MX50_INT_GPIO4_LOW 56
-#define MX50_INT_GPIO4_HIGH 57
-#define MX50_INT_WDOG1 58
-#define MX50_INT_KPP 60
-#define MX50_INT_PWM1 61
-#define MX50_INT_I2C1 62
-#define MX50_INT_I2C2 63
-#define MX50_INT_I2C3 64
-#define MX50_INT_RESV65 65
-#define MX50_INT_DCDC 66
-#define MX50_INT_THERMAL_ALARM 67
-#define MX50_INT_ANA3 68
-#define MX50_INT_ANA4 69
-#define MX50_INT_CCM1 71
-#define MX50_INT_CCM2 72
-#define MX50_INT_GPC1 73
-#define MX50_INT_GPC2 74
-#define MX50_INT_SRC 75
-#define MX50_INT_NM 76
-#define MX50_INT_PMU 77
-#define MX50_INT_CTI_IRQ 78
-#define MX50_INT_CTI1_TG0 79
-#define MX50_INT_CTI1_TG1 80
-#define MX50_INT_GPU2_IRQ 84
-#define MX50_INT_GPU2_BUSY 85
-#define MX50_INT_UART5 86
-#define MX50_INT_FEC 87
-#define MX50_INT_OWIRE 88
-#define MX50_INT_CTI1_TG2 89
-#define MX50_INT_SJC 90
-#define MX50_INT_DCP_CHAN1_3 91
-#define MX50_INT_DCP_CHAN0 92
-#define MX50_INT_PWM2 94
-#define MX50_INT_RNGB 97
-#define MX50_INT_CTI1_TG3 98
-#define MX50_INT_RAWNAND_BCH 100
-#define MX50_INT_RAWNAND_GPMI 102
-#define MX50_INT_GPIO5_LOW 103
-#define MX50_INT_GPIO5_HIGH 104
-#define MX50_INT_GPIO6_LOW 105
-#define MX50_INT_GPIO6_HIGH 106
-#define MX50_INT_MSHC 109
-#define MX50_INT_APBHDMA_CHAN0 110
-#define MX50_INT_APBHDMA_CHAN1 111
-#define MX50_INT_APBHDMA_CHAN2 112
-#define MX50_INT_APBHDMA_CHAN3 113
-#define MX50_INT_APBHDMA_CHAN4 114
-#define MX50_INT_APBHDMA_CHAN5 115
-#define MX50_INT_APBHDMA_CHAN6 116
-#define MX50_INT_APBHDMA_CHAN7 117
+#include <asm/irq.h>
+#define MX50_INT_MMC_SDHC1 (NR_IRQS_LEGACY + 1)
+#define MX50_INT_MMC_SDHC2 (NR_IRQS_LEGACY + 2)
+#define MX50_INT_MMC_SDHC3 (NR_IRQS_LEGACY + 3)
+#define MX50_INT_MMC_SDHC4 (NR_IRQS_LEGACY + 4)
+#define MX50_INT_DAP (NR_IRQS_LEGACY + 5)
+#define MX50_INT_SDMA (NR_IRQS_LEGACY + 6)
+#define MX50_INT_IOMUX (NR_IRQS_LEGACY + 7)
+#define MX50_INT_UART4 (NR_IRQS_LEGACY + 13)
+#define MX50_INT_USB_H1 (NR_IRQS_LEGACY + 14)
+#define MX50_INT_USB_OTG (NR_IRQS_LEGACY + 18)
+#define MX50_INT_DATABAHN (NR_IRQS_LEGACY + 19)
+#define MX50_INT_ELCDIF (NR_IRQS_LEGACY + 20)
+#define MX50_INT_EPXP (NR_IRQS_LEGACY + 21)
+#define MX50_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24)
+#define MX50_INT_SRTC_TZ (NR_IRQS_LEGACY + 25)
+#define MX50_INT_EPDC (NR_IRQS_LEGACY + 27)
+#define MX50_INT_NIC (NR_IRQS_LEGACY + 28)
+#define MX50_INT_SSI1 (NR_IRQS_LEGACY + 29)
+#define MX50_INT_SSI2 (NR_IRQS_LEGACY + 30)
+#define MX50_INT_UART1 (NR_IRQS_LEGACY + 31)
+#define MX50_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX50_INT_UART3 (NR_IRQS_LEGACY + 33)
+#define MX50_INT_RESV34 (NR_IRQS_LEGACY + 34)
+#define MX50_INT_RESV35 (NR_IRQS_LEGACY + 35)
+#define MX50_INT_CSPI1 (NR_IRQS_LEGACY + 36)
+#define MX50_INT_CSPI2 (NR_IRQS_LEGACY + 37)
+#define MX50_INT_CSPI (NR_IRQS_LEGACY + 38)
+#define MX50_INT_GPT (NR_IRQS_LEGACY + 39)
+#define MX50_INT_EPIT1 (NR_IRQS_LEGACY + 40)
+#define MX50_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42)
+#define MX50_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43)
+#define MX50_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44)
+#define MX50_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45)
+#define MX50_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46)
+#define MX50_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47)
+#define MX50_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48)
+#define MX50_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49)
+#define MX50_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50)
+#define MX50_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51)
+#define MX50_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52)
+#define MX50_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53)
+#define MX50_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54)
+#define MX50_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55)
+#define MX50_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56)
+#define MX50_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57)
+#define MX50_INT_WDOG1 (NR_IRQS_LEGACY + 58)
+#define MX50_INT_KPP (NR_IRQS_LEGACY + 60)
+#define MX50_INT_PWM1 (NR_IRQS_LEGACY + 61)
+#define MX50_INT_I2C1 (NR_IRQS_LEGACY + 62)
+#define MX50_INT_I2C2 (NR_IRQS_LEGACY + 63)
+#define MX50_INT_I2C3 (NR_IRQS_LEGACY + 64)
+#define MX50_INT_RESV65 (NR_IRQS_LEGACY + 65)
+#define MX50_INT_DCDC (NR_IRQS_LEGACY + 66)
+#define MX50_INT_THERMAL_ALARM (NR_IRQS_LEGACY + 67)
+#define MX50_INT_ANA3 (NR_IRQS_LEGACY + 68)
+#define MX50_INT_ANA4 (NR_IRQS_LEGACY + 69)
+#define MX50_INT_CCM1 (NR_IRQS_LEGACY + 71)
+#define MX50_INT_CCM2 (NR_IRQS_LEGACY + 72)
+#define MX50_INT_GPC1 (NR_IRQS_LEGACY + 73)
+#define MX50_INT_GPC2 (NR_IRQS_LEGACY + 74)
+#define MX50_INT_SRC (NR_IRQS_LEGACY + 75)
+#define MX50_INT_NM (NR_IRQS_LEGACY + 76)
+#define MX50_INT_PMU (NR_IRQS_LEGACY + 77)
+#define MX50_INT_CTI_IRQ (NR_IRQS_LEGACY + 78)
+#define MX50_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79)
+#define MX50_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80)
+#define MX50_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84)
+#define MX50_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85)
+#define MX50_INT_UART5 (NR_IRQS_LEGACY + 86)
+#define MX50_INT_FEC (NR_IRQS_LEGACY + 87)
+#define MX50_INT_OWIRE (NR_IRQS_LEGACY + 88)
+#define MX50_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89)
+#define MX50_INT_SJC (NR_IRQS_LEGACY + 90)
+#define MX50_INT_DCP_CHAN1_3 (NR_IRQS_LEGACY + 91)
+#define MX50_INT_DCP_CHAN0 (NR_IRQS_LEGACY + 92)
+#define MX50_INT_PWM2 (NR_IRQS_LEGACY + 94)
+#define MX50_INT_RNGB (NR_IRQS_LEGACY + 97)
+#define MX50_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98)
+#define MX50_INT_RAWNAND_BCH (NR_IRQS_LEGACY + 100)
+#define MX50_INT_RAWNAND_GPMI (NR_IRQS_LEGACY + 102)
+#define MX50_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103)
+#define MX50_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104)
+#define MX50_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105)
+#define MX50_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106)
+#define MX50_INT_MSHC (NR_IRQS_LEGACY + 109)
+#define MX50_INT_APBHDMA_CHAN0 (NR_IRQS_LEGACY + 110)
+#define MX50_INT_APBHDMA_CHAN1 (NR_IRQS_LEGACY + 111)
+#define MX50_INT_APBHDMA_CHAN2 (NR_IRQS_LEGACY + 112)
+#define MX50_INT_APBHDMA_CHAN3 (NR_IRQS_LEGACY + 113)
+#define MX50_INT_APBHDMA_CHAN4 (NR_IRQS_LEGACY + 114)
+#define MX50_INT_APBHDMA_CHAN5 (NR_IRQS_LEGACY + 115)
+#define MX50_INT_APBHDMA_CHAN6 (NR_IRQS_LEGACY + 116)
+#define MX50_INT_APBHDMA_CHAN7 (NR_IRQS_LEGACY + 117)
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
extern int mx50_revision(void);
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index cdf07c6..af844f7 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -232,110 +232,111 @@
/*
* Interrupt numbers
*/
-#define MX51_INT_BASE 0
-#define MX51_INT_RESV0 0
-#define MX51_INT_ESDHC1 1
-#define MX51_INT_ESDHC2 2
-#define MX51_INT_ESDHC3 3
-#define MX51_INT_ESDHC4 4
-#define MX51_INT_RESV5 5
-#define MX51_INT_SDMA 6
-#define MX51_INT_IOMUX 7
-#define MX51_INT_NFC 8
-#define MX51_INT_VPU 9
-#define MX51_INT_IPU_ERR 10
-#define MX51_INT_IPU_SYN 11
-#define MX51_INT_GPU 12
-#define MX51_INT_RESV13 13
-#define MX51_INT_USB_HS1 14
-#define MX51_INT_EMI 15
-#define MX51_INT_USB_HS2 16
-#define MX51_INT_USB_HS3 17
-#define MX51_INT_USB_OTG 18
-#define MX51_INT_SAHARA_H0 19
-#define MX51_INT_SAHARA_H1 20
-#define MX51_INT_SCC_SMN 21
-#define MX51_INT_SCC_STZ 22
-#define MX51_INT_SCC_SCM 23
-#define MX51_INT_SRTC_NTZ 24
-#define MX51_INT_SRTC_TZ 25
-#define MX51_INT_RTIC 26
-#define MX51_INT_CSU 27
-#define MX51_INT_SLIM_B 28
-#define MX51_INT_SSI1 29
-#define MX51_INT_SSI2 30
-#define MX51_INT_UART1 31
-#define MX51_INT_UART2 32
-#define MX51_INT_UART3 33
-#define MX51_INT_RESV34 34
-#define MX51_INT_RESV35 35
-#define MX51_INT_ECSPI1 36
-#define MX51_INT_ECSPI2 37
-#define MX51_INT_CSPI 38
-#define MX51_INT_GPT 39
-#define MX51_INT_EPIT1 40
-#define MX51_INT_EPIT2 41
-#define MX51_INT_GPIO1_INT7 42
-#define MX51_INT_GPIO1_INT6 43
-#define MX51_INT_GPIO1_INT5 44
-#define MX51_INT_GPIO1_INT4 45
-#define MX51_INT_GPIO1_INT3 46
-#define MX51_INT_GPIO1_INT2 47
-#define MX51_INT_GPIO1_INT1 48
-#define MX51_INT_GPIO1_INT0 49
-#define MX51_INT_GPIO1_LOW 50
-#define MX51_INT_GPIO1_HIGH 51
-#define MX51_INT_GPIO2_LOW 52
-#define MX51_INT_GPIO2_HIGH 53
-#define MX51_INT_GPIO3_LOW 54
-#define MX51_INT_GPIO3_HIGH 55
-#define MX51_INT_GPIO4_LOW 56
-#define MX51_INT_GPIO4_HIGH 57
-#define MX51_INT_WDOG1 58
-#define MX51_INT_WDOG2 59
-#define MX51_INT_KPP 60
-#define MX51_INT_PWM1 61
-#define MX51_INT_I2C1 62
-#define MX51_INT_I2C2 63
-#define MX51_INT_HS_I2C 64
-#define MX51_INT_RESV65 65
-#define MX51_INT_RESV66 66
-#define MX51_INT_SIM_IPB 67
-#define MX51_INT_SIM_DAT 68
-#define MX51_INT_IIM 69
-#define MX51_INT_ATA 70
-#define MX51_INT_CCM1 71
-#define MX51_INT_CCM2 72
-#define MX51_INT_GPC1 73
-#define MX51_INT_GPC2 74
-#define MX51_INT_SRC 75
-#define MX51_INT_NM 76
-#define MX51_INT_PMU 77
-#define MX51_INT_CTI_IRQ 78
-#define MX51_INT_CTI1_TG0 79
-#define MX51_INT_CTI1_TG1 80
-#define MX51_INT_MCG_ERR 81
-#define MX51_INT_MCG_TMR 82
-#define MX51_INT_MCG_FUNC 83
-#define MX51_INT_GPU2_IRQ 84
-#define MX51_INT_GPU2_BUSY 85
-#define MX51_INT_RESV86 86
-#define MX51_INT_FEC 87
-#define MX51_INT_OWIRE 88
-#define MX51_INT_CTI1_TG2 89
-#define MX51_INT_SJC 90
-#define MX51_INT_SPDIF 91
-#define MX51_INT_TVE 92
-#define MX51_INT_FIRI 93
-#define MX51_INT_PWM2 94
-#define MX51_INT_SLIM_EXP 95
-#define MX51_INT_SSI3 96
-#define MX51_INT_EMI_BOOT 97
-#define MX51_INT_CTI1_TG3 98
-#define MX51_INT_SMC_RX 99
-#define MX51_INT_VPU_IDLE 100
-#define MX51_INT_EMI_NFC 101
-#define MX51_INT_GPU_IDLE 102
+#include <asm/irq.h>
+#define MX51_INT_BASE (NR_IRQS_LEGACY + 0)
+#define MX51_INT_RESV0 (NR_IRQS_LEGACY + 0)
+#define MX51_INT_ESDHC1 (NR_IRQS_LEGACY + 1)
+#define MX51_INT_ESDHC2 (NR_IRQS_LEGACY + 2)
+#define MX51_INT_ESDHC3 (NR_IRQS_LEGACY + 3)
+#define MX51_INT_ESDHC4 (NR_IRQS_LEGACY + 4)
+#define MX51_INT_RESV5 (NR_IRQS_LEGACY + 5)
+#define MX51_INT_SDMA (NR_IRQS_LEGACY + 6)
+#define MX51_INT_IOMUX (NR_IRQS_LEGACY + 7)
+#define MX51_INT_NFC (NR_IRQS_LEGACY + 8)
+#define MX51_INT_VPU (NR_IRQS_LEGACY + 9)
+#define MX51_INT_IPU_ERR (NR_IRQS_LEGACY + 10)
+#define MX51_INT_IPU_SYN (NR_IRQS_LEGACY + 11)
+#define MX51_INT_GPU (NR_IRQS_LEGACY + 12)
+#define MX51_INT_RESV13 (NR_IRQS_LEGACY + 13)
+#define MX51_INT_USB_HS1 (NR_IRQS_LEGACY + 14)
+#define MX51_INT_EMI (NR_IRQS_LEGACY + 15)
+#define MX51_INT_USB_HS2 (NR_IRQS_LEGACY + 16)
+#define MX51_INT_USB_HS3 (NR_IRQS_LEGACY + 17)
+#define MX51_INT_USB_OTG (NR_IRQS_LEGACY + 18)
+#define MX51_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19)
+#define MX51_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20)
+#define MX51_INT_SCC_SMN (NR_IRQS_LEGACY + 21)
+#define MX51_INT_SCC_STZ (NR_IRQS_LEGACY + 22)
+#define MX51_INT_SCC_SCM (NR_IRQS_LEGACY + 23)
+#define MX51_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24)
+#define MX51_INT_SRTC_TZ (NR_IRQS_LEGACY + 25)
+#define MX51_INT_RTIC (NR_IRQS_LEGACY + 26)
+#define MX51_INT_CSU (NR_IRQS_LEGACY + 27)
+#define MX51_INT_SLIM_B (NR_IRQS_LEGACY + 28)
+#define MX51_INT_SSI1 (NR_IRQS_LEGACY + 29)
+#define MX51_INT_SSI2 (NR_IRQS_LEGACY + 30)
+#define MX51_INT_UART1 (NR_IRQS_LEGACY + 31)
+#define MX51_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX51_INT_UART3 (NR_IRQS_LEGACY + 33)
+#define MX51_INT_RESV34 (NR_IRQS_LEGACY + 34)
+#define MX51_INT_RESV35 (NR_IRQS_LEGACY + 35)
+#define MX51_INT_ECSPI1 (NR_IRQS_LEGACY + 36)
+#define MX51_INT_ECSPI2 (NR_IRQS_LEGACY + 37)
+#define MX51_INT_CSPI (NR_IRQS_LEGACY + 38)
+#define MX51_INT_GPT (NR_IRQS_LEGACY + 39)
+#define MX51_INT_EPIT1 (NR_IRQS_LEGACY + 40)
+#define MX51_INT_EPIT2 (NR_IRQS_LEGACY + 41)
+#define MX51_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42)
+#define MX51_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43)
+#define MX51_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44)
+#define MX51_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45)
+#define MX51_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46)
+#define MX51_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47)
+#define MX51_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48)
+#define MX51_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49)
+#define MX51_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50)
+#define MX51_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51)
+#define MX51_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52)
+#define MX51_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53)
+#define MX51_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54)
+#define MX51_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55)
+#define MX51_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56)
+#define MX51_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57)
+#define MX51_INT_WDOG1 (NR_IRQS_LEGACY + 58)
+#define MX51_INT_WDOG2 (NR_IRQS_LEGACY + 59)
+#define MX51_INT_KPP (NR_IRQS_LEGACY + 60)
+#define MX51_INT_PWM1 (NR_IRQS_LEGACY + 61)
+#define MX51_INT_I2C1 (NR_IRQS_LEGACY + 62)
+#define MX51_INT_I2C2 (NR_IRQS_LEGACY + 63)
+#define MX51_INT_HS_I2C (NR_IRQS_LEGACY + 64)
+#define MX51_INT_RESV65 (NR_IRQS_LEGACY + 65)
+#define MX51_INT_RESV66 (NR_IRQS_LEGACY + 66)
+#define MX51_INT_SIM_IPB (NR_IRQS_LEGACY + 67)
+#define MX51_INT_SIM_DAT (NR_IRQS_LEGACY + 68)
+#define MX51_INT_IIM (NR_IRQS_LEGACY + 69)
+#define MX51_INT_ATA (NR_IRQS_LEGACY + 70)
+#define MX51_INT_CCM1 (NR_IRQS_LEGACY + 71)
+#define MX51_INT_CCM2 (NR_IRQS_LEGACY + 72)
+#define MX51_INT_GPC1 (NR_IRQS_LEGACY + 73)
+#define MX51_INT_GPC2 (NR_IRQS_LEGACY + 74)
+#define MX51_INT_SRC (NR_IRQS_LEGACY + 75)
+#define MX51_INT_NM (NR_IRQS_LEGACY + 76)
+#define MX51_INT_PMU (NR_IRQS_LEGACY + 77)
+#define MX51_INT_CTI_IRQ (NR_IRQS_LEGACY + 78)
+#define MX51_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79)
+#define MX51_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80)
+#define MX51_INT_MCG_ERR (NR_IRQS_LEGACY + 81)
+#define MX51_INT_MCG_TMR (NR_IRQS_LEGACY + 82)
+#define MX51_INT_MCG_FUNC (NR_IRQS_LEGACY + 83)
+#define MX51_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84)
+#define MX51_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85)
+#define MX51_INT_RESV86 (NR_IRQS_LEGACY + 86)
+#define MX51_INT_FEC (NR_IRQS_LEGACY + 87)
+#define MX51_INT_OWIRE (NR_IRQS_LEGACY + 88)
+#define MX51_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89)
+#define MX51_INT_SJC (NR_IRQS_LEGACY + 90)
+#define MX51_INT_SPDIF (NR_IRQS_LEGACY + 91)
+#define MX51_INT_TVE (NR_IRQS_LEGACY + 92)
+#define MX51_INT_FIRI (NR_IRQS_LEGACY + 93)
+#define MX51_INT_PWM2 (NR_IRQS_LEGACY + 94)
+#define MX51_INT_SLIM_EXP (NR_IRQS_LEGACY + 95)
+#define MX51_INT_SSI3 (NR_IRQS_LEGACY + 96)
+#define MX51_INT_EMI_BOOT (NR_IRQS_LEGACY + 97)
+#define MX51_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98)
+#define MX51_INT_SMC_RX (NR_IRQS_LEGACY + 99)
+#define MX51_INT_VPU_IDLE (NR_IRQS_LEGACY + 100)
+#define MX51_INT_EMI_NFC (NR_IRQS_LEGACY + 101)
+#define MX51_INT_GPU_IDLE (NR_IRQS_LEGACY + 102)
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
extern int mx51_revision(void);
diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h
index a37e8c3..f829d1c 100644
--- a/arch/arm/plat-mxc/include/mach/mx53.h
+++ b/arch/arm/plat-mxc/include/mach/mx53.h
@@ -229,113 +229,114 @@
/*
* Interrupt numbers
*/
-#define MX53_INT_RESV0 0
-#define MX53_INT_ESDHC1 1
-#define MX53_INT_ESDHC2 2
-#define MX53_INT_ESDHC3 3
-#define MX53_INT_ESDHC4 4
-#define MX53_INT_DAP 5
-#define MX53_INT_SDMA 6
-#define MX53_INT_IOMUX 7
-#define MX53_INT_NFC 8
-#define MX53_INT_VPU 9
-#define MX53_INT_IPU_ERR 10
-#define MX53_INT_IPU_SYN 11
-#define MX53_INT_GPU 12
-#define MX53_INT_UART4 13
-#define MX53_INT_USB_H1 14
-#define MX53_INT_EMI 15
-#define MX53_INT_USB_H2 16
-#define MX53_INT_USB_H3 17
-#define MX53_INT_USB_OTG 18
-#define MX53_INT_SAHARA_H0 19
-#define MX53_INT_SAHARA_H1 20
-#define MX53_INT_SCC_SMN 21
-#define MX53_INT_SCC_STZ 22
-#define MX53_INT_SCC_SCM 23
-#define MX53_INT_SRTC_NTZ 24
-#define MX53_INT_SRTC_TZ 25
-#define MX53_INT_RTIC 26
-#define MX53_INT_CSU 27
-#define MX53_INT_SATA 28
-#define MX53_INT_SSI1 29
-#define MX53_INT_SSI2 30
-#define MX53_INT_UART1 31
-#define MX53_INT_UART2 32
-#define MX53_INT_UART3 33
-#define MX53_INT_RTC 34
-#define MX53_INT_PTP 35
-#define MX53_INT_ECSPI1 36
-#define MX53_INT_ECSPI2 37
-#define MX53_INT_CSPI 38
-#define MX53_INT_GPT 39
-#define MX53_INT_EPIT1 40
-#define MX53_INT_EPIT2 41
-#define MX53_INT_GPIO1_INT7 42
-#define MX53_INT_GPIO1_INT6 43
-#define MX53_INT_GPIO1_INT5 44
-#define MX53_INT_GPIO1_INT4 45
-#define MX53_INT_GPIO1_INT3 46
-#define MX53_INT_GPIO1_INT2 47
-#define MX53_INT_GPIO1_INT1 48
-#define MX53_INT_GPIO1_INT0 49
-#define MX53_INT_GPIO1_LOW 50
-#define MX53_INT_GPIO1_HIGH 51
-#define MX53_INT_GPIO2_LOW 52
-#define MX53_INT_GPIO2_HIGH 53
-#define MX53_INT_GPIO3_LOW 54
-#define MX53_INT_GPIO3_HIGH 55
-#define MX53_INT_GPIO4_LOW 56
-#define MX53_INT_GPIO4_HIGH 57
-#define MX53_INT_WDOG1 58
-#define MX53_INT_WDOG2 59
-#define MX53_INT_KPP 60
-#define MX53_INT_PWM1 61
-#define MX53_INT_I2C1 62
-#define MX53_INT_I2C2 63
-#define MX53_INT_I2C3 64
-#define MX53_INT_MLB 65
-#define MX53_INT_ASRC 66
-#define MX53_INT_SPDIF 67
-#define MX53_INT_SIM_DAT 68
-#define MX53_INT_IIM 69
-#define MX53_INT_ATA 70
-#define MX53_INT_CCM1 71
-#define MX53_INT_CCM2 72
-#define MX53_INT_GPC1 73
-#define MX53_INT_GPC2 74
-#define MX53_INT_SRC 75
-#define MX53_INT_NM 76
-#define MX53_INT_PMU 77
-#define MX53_INT_CTI_IRQ 78
-#define MX53_INT_CTI1_TG0 79
-#define MX53_INT_CTI1_TG1 80
-#define MX53_INT_ESAI 81
-#define MX53_INT_CAN1 82
-#define MX53_INT_CAN2 83
-#define MX53_INT_GPU2_IRQ 84
-#define MX53_INT_GPU2_BUSY 85
-#define MX53_INT_UART5 86
-#define MX53_INT_FEC 87
-#define MX53_INT_OWIRE 88
-#define MX53_INT_CTI1_TG2 89
-#define MX53_INT_SJC 90
-#define MX53_INT_TVE 92
-#define MX53_INT_FIRI 93
-#define MX53_INT_PWM2 94
-#define MX53_INT_SLIM_EXP 95
-#define MX53_INT_SSI3 96
-#define MX53_INT_EMI_BOOT 97
-#define MX53_INT_CTI1_TG3 98
-#define MX53_INT_SMC_RX 99
-#define MX53_INT_VPU_IDLE 100
-#define MX53_INT_EMI_NFC 101
-#define MX53_INT_GPU_IDLE 102
-#define MX53_INT_GPIO5_LOW 103
-#define MX53_INT_GPIO5_HIGH 104
-#define MX53_INT_GPIO6_LOW 105
-#define MX53_INT_GPIO6_HIGH 106
-#define MX53_INT_GPIO7_LOW 107
-#define MX53_INT_GPIO7_HIGH 108
+#include <asm/irq.h>
+#define MX53_INT_RESV0 (NR_IRQS_LEGACY + 0)
+#define MX53_INT_ESDHC1 (NR_IRQS_LEGACY + 1)
+#define MX53_INT_ESDHC2 (NR_IRQS_LEGACY + 2)
+#define MX53_INT_ESDHC3 (NR_IRQS_LEGACY + 3)
+#define MX53_INT_ESDHC4 (NR_IRQS_LEGACY + 4)
+#define MX53_INT_DAP (NR_IRQS_LEGACY + 5)
+#define MX53_INT_SDMA (NR_IRQS_LEGACY + 6)
+#define MX53_INT_IOMUX (NR_IRQS_LEGACY + 7)
+#define MX53_INT_NFC (NR_IRQS_LEGACY + 8)
+#define MX53_INT_VPU (NR_IRQS_LEGACY + 9)
+#define MX53_INT_IPU_ERR (NR_IRQS_LEGACY + 10)
+#define MX53_INT_IPU_SYN (NR_IRQS_LEGACY + 11)
+#define MX53_INT_GPU (NR_IRQS_LEGACY + 12)
+#define MX53_INT_UART4 (NR_IRQS_LEGACY + 13)
+#define MX53_INT_USB_H1 (NR_IRQS_LEGACY + 14)
+#define MX53_INT_EMI (NR_IRQS_LEGACY + 15)
+#define MX53_INT_USB_H2 (NR_IRQS_LEGACY + 16)
+#define MX53_INT_USB_H3 (NR_IRQS_LEGACY + 17)
+#define MX53_INT_USB_OTG (NR_IRQS_LEGACY + 18)
+#define MX53_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19)
+#define MX53_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20)
+#define MX53_INT_SCC_SMN (NR_IRQS_LEGACY + 21)
+#define MX53_INT_SCC_STZ (NR_IRQS_LEGACY + 22)
+#define MX53_INT_SCC_SCM (NR_IRQS_LEGACY + 23)
+#define MX53_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24)
+#define MX53_INT_SRTC_TZ (NR_IRQS_LEGACY + 25)
+#define MX53_INT_RTIC (NR_IRQS_LEGACY + 26)
+#define MX53_INT_CSU (NR_IRQS_LEGACY + 27)
+#define MX53_INT_SATA (NR_IRQS_LEGACY + 28)
+#define MX53_INT_SSI1 (NR_IRQS_LEGACY + 29)
+#define MX53_INT_SSI2 (NR_IRQS_LEGACY + 30)
+#define MX53_INT_UART1 (NR_IRQS_LEGACY + 31)
+#define MX53_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX53_INT_UART3 (NR_IRQS_LEGACY + 33)
+#define MX53_INT_RTC (NR_IRQS_LEGACY + 34)
+#define MX53_INT_PTP (NR_IRQS_LEGACY + 35)
+#define MX53_INT_ECSPI1 (NR_IRQS_LEGACY + 36)
+#define MX53_INT_ECSPI2 (NR_IRQS_LEGACY + 37)
+#define MX53_INT_CSPI (NR_IRQS_LEGACY + 38)
+#define MX53_INT_GPT (NR_IRQS_LEGACY + 39)
+#define MX53_INT_EPIT1 (NR_IRQS_LEGACY + 40)
+#define MX53_INT_EPIT2 (NR_IRQS_LEGACY + 41)
+#define MX53_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42)
+#define MX53_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43)
+#define MX53_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44)
+#define MX53_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45)
+#define MX53_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46)
+#define MX53_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47)
+#define MX53_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48)
+#define MX53_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49)
+#define MX53_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50)
+#define MX53_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51)
+#define MX53_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52)
+#define MX53_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53)
+#define MX53_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54)
+#define MX53_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55)
+#define MX53_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56)
+#define MX53_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57)
+#define MX53_INT_WDOG1 (NR_IRQS_LEGACY + 58)
+#define MX53_INT_WDOG2 (NR_IRQS_LEGACY + 59)
+#define MX53_INT_KPP (NR_IRQS_LEGACY + 60)
+#define MX53_INT_PWM1 (NR_IRQS_LEGACY + 61)
+#define MX53_INT_I2C1 (NR_IRQS_LEGACY + 62)
+#define MX53_INT_I2C2 (NR_IRQS_LEGACY + 63)
+#define MX53_INT_I2C3 (NR_IRQS_LEGACY + 64)
+#define MX53_INT_MLB (NR_IRQS_LEGACY + 65)
+#define MX53_INT_ASRC (NR_IRQS_LEGACY + 66)
+#define MX53_INT_SPDIF (NR_IRQS_LEGACY + 67)
+#define MX53_INT_SIM_DAT (NR_IRQS_LEGACY + 68)
+#define MX53_INT_IIM (NR_IRQS_LEGACY + 69)
+#define MX53_INT_ATA (NR_IRQS_LEGACY + 70)
+#define MX53_INT_CCM1 (NR_IRQS_LEGACY + 71)
+#define MX53_INT_CCM2 (NR_IRQS_LEGACY + 72)
+#define MX53_INT_GPC1 (NR_IRQS_LEGACY + 73)
+#define MX53_INT_GPC2 (NR_IRQS_LEGACY + 74)
+#define MX53_INT_SRC (NR_IRQS_LEGACY + 75)
+#define MX53_INT_NM (NR_IRQS_LEGACY + 76)
+#define MX53_INT_PMU (NR_IRQS_LEGACY + 77)
+#define MX53_INT_CTI_IRQ (NR_IRQS_LEGACY + 78)
+#define MX53_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79)
+#define MX53_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80)
+#define MX53_INT_ESAI (NR_IRQS_LEGACY + 81)
+#define MX53_INT_CAN1 (NR_IRQS_LEGACY + 82)
+#define MX53_INT_CAN2 (NR_IRQS_LEGACY + 83)
+#define MX53_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84)
+#define MX53_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85)
+#define MX53_INT_UART5 (NR_IRQS_LEGACY + 86)
+#define MX53_INT_FEC (NR_IRQS_LEGACY + 87)
+#define MX53_INT_OWIRE (NR_IRQS_LEGACY + 88)
+#define MX53_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89)
+#define MX53_INT_SJC (NR_IRQS_LEGACY + 90)
+#define MX53_INT_TVE (NR_IRQS_LEGACY + 92)
+#define MX53_INT_FIRI (NR_IRQS_LEGACY + 93)
+#define MX53_INT_PWM2 (NR_IRQS_LEGACY + 94)
+#define MX53_INT_SLIM_EXP (NR_IRQS_LEGACY + 95)
+#define MX53_INT_SSI3 (NR_IRQS_LEGACY + 96)
+#define MX53_INT_EMI_BOOT (NR_IRQS_LEGACY + 97)
+#define MX53_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98)
+#define MX53_INT_SMC_RX (NR_IRQS_LEGACY + 99)
+#define MX53_INT_VPU_IDLE (NR_IRQS_LEGACY + 100)
+#define MX53_INT_EMI_NFC (NR_IRQS_LEGACY + 101)
+#define MX53_INT_GPU_IDLE (NR_IRQS_LEGACY + 102)
+#define MX53_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103)
+#define MX53_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104)
+#define MX53_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105)
+#define MX53_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106)
+#define MX53_INT_GPIO7_LOW (NR_IRQS_LEGACY + 107)
+#define MX53_INT_GPIO7_HIGH (NR_IRQS_LEGACY + 108)
#endif /* ifndef __MACH_MX53_H__ */
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index 98308ec..c60a7e4 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -15,6 +15,8 @@
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
@@ -49,6 +51,7 @@
#define TZIC_ID0 0x0FD0 /* Indentification Register 0 */
void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
+static struct irq_domain *domain;
#define TZIC_NUM_IRQS 128
@@ -77,15 +80,14 @@
static void tzic_irq_suspend(struct irq_data *d)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
- int idx = gc->irq_base >> 5;
+ int idx = d->hwirq >> 5;
__raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx));
}
static void tzic_irq_resume(struct irq_data *d)
{
- struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
- int idx = gc->irq_base >> 5;
+ int idx = d->hwirq >> 5;
__raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)),
tzic_base + TZIC_WAKEUP0(idx));
@@ -102,11 +104,10 @@
#endif
};
-static __init void tzic_init_gc(unsigned int irq_start)
+static __init void tzic_init_gc(int idx, unsigned int irq_start)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
- int idx = irq_start >> 5;
gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base,
handle_level_irq);
@@ -140,7 +141,8 @@
while (stat) {
handled = 1;
irqofs = fls(stat) - 1;
- handle_IRQ(irqofs + i * 32, regs);
+ handle_IRQ(irq_find_mapping(domain,
+ irqofs + i * 32), regs);
stat &= ~(1 << irqofs);
}
}
@@ -154,6 +156,8 @@
*/
void __init tzic_init_irq(void __iomem *irqbase)
{
+ struct device_node *np;
+ int irq_base;
int i;
tzic_base = irqbase;
@@ -175,12 +179,20 @@
/* all IRQ no FIQ Warning :: No selection */
- for (i = 0; i < TZIC_NUM_IRQS; i += 32)
- tzic_init_gc(i);
+ irq_base = irq_alloc_descs(-1, 0, TZIC_NUM_IRQS, numa_node_id());
+ WARN_ON(irq_base < 0);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,tzic");
+ domain = irq_domain_add_legacy(np, TZIC_NUM_IRQS, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ WARN_ON(!domain);
+
+ for (i = 0; i < 4; i++, irq_base += 32)
+ tzic_init_gc(i, irq_base);
#ifdef CONFIG_FIQ
/* Initialize FIQ */
- init_FIQ();
+ init_FIQ(FIQ_START);
#endif
pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index bc42c04..fe57bbb 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -533,7 +533,7 @@
int i;
#ifdef CONFIG_FIQ
- init_FIQ();
+ init_FIQ(FIQ_START);
#endif
irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 5ec7204..c7573e5 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -1663,7 +1663,6 @@
static int __init ipu_probe(struct platform_device *pdev)
{
- struct ipu_platform_data *pdata = pdev->dev.platform_data;
struct resource *mem_ipu, *mem_ic;
int ret;
@@ -1671,7 +1670,7 @@
mem_ipu = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mem_ic = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!pdata || !mem_ipu || !mem_ic)
+ if (!mem_ipu || !mem_ic)
return -EINVAL;
ipu_data.dev = &pdev->dev;
@@ -1688,10 +1687,9 @@
goto err_noirq;
ipu_data.irq_err = ret;
- ipu_data.irq_base = pdata->irq_base;
- dev_dbg(&pdev->dev, "fn irq %u, err irq %u, irq-base %u\n",
- ipu_data.irq_fn, ipu_data.irq_err, ipu_data.irq_base);
+ dev_dbg(&pdev->dev, "fn irq %u, err irq %u\n",
+ ipu_data.irq_fn, ipu_data.irq_err);
/* Remap IPU common registers */
ipu_data.reg_ipu = ioremap(mem_ipu->start, resource_size(mem_ipu));
diff --git a/drivers/dma/ipu/ipu_irq.c b/drivers/dma/ipu/ipu_irq.c
index a71f55e..fa95bcc 100644
--- a/drivers/dma/ipu/ipu_irq.c
+++ b/drivers/dma/ipu/ipu_irq.c
@@ -14,6 +14,7 @@
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <mach/ipu.h>
@@ -354,10 +355,12 @@
/* Install the IRQ handler */
int __init ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev)
{
- struct ipu_platform_data *pdata = dev->dev.platform_data;
- unsigned int irq, irq_base, i;
+ unsigned int irq, i;
+ int irq_base = irq_alloc_descs(-1, 0, CONFIG_MX3_IPU_IRQS,
+ numa_node_id());
- irq_base = pdata->irq_base;
+ if (irq_base < 0)
+ return irq_base;
for (i = 0; i < IPU_IRQ_NR_BANKS; i++)
irq_bank[i].ipu = ipu;
@@ -387,15 +390,16 @@
irq_set_handler_data(ipu->irq_err, ipu);
irq_set_chained_handler(ipu->irq_err, ipu_irq_err);
+ ipu->irq_base = irq_base;
+
return 0;
}
void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev)
{
- struct ipu_platform_data *pdata = dev->dev.platform_data;
unsigned int irq, irq_base;
- irq_base = pdata->irq_base;
+ irq_base = ipu->irq_base;
irq_set_chained_handler(ipu->irq_fn, NULL);
irq_set_handler_data(ipu->irq_fn, NULL);
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index c89c4c1..04691d3 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
@@ -33,8 +34,6 @@
#include <asm-generic/bug.h>
#include <asm/mach/irq.h>
-#define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START)
-
enum mxc_gpio_hwtype {
IMX1_GPIO, /* runs on i.mx1 */
IMX21_GPIO, /* runs on i.mx21 and i.mx27 */
@@ -61,7 +60,7 @@
void __iomem *base;
int irq;
int irq_high;
- int virtual_irq_start;
+ struct irq_domain *domain;
struct bgpio_chip bgc;
u32 both_edges;
};
@@ -144,14 +143,15 @@
static int gpio_set_irq_type(struct irq_data *d, u32 type)
{
- u32 gpio = irq_to_gpio(d->irq);
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct mxc_gpio_port *port = gc->private;
u32 bit, val;
+ u32 gpio_idx = d->hwirq;
+ u32 gpio = port->bgc.gc.base + gpio_idx;
int edge;
void __iomem *reg = port->base;
- port->both_edges &= ~(1 << (gpio & 31));
+ port->both_edges &= ~(1 << gpio_idx);
switch (type) {
case IRQ_TYPE_EDGE_RISING:
edge = GPIO_INT_RISE_EDGE;
@@ -168,7 +168,7 @@
edge = GPIO_INT_HIGH_LEV;
pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
}
- port->both_edges |= 1 << (gpio & 31);
+ port->both_edges |= 1 << gpio_idx;
break;
case IRQ_TYPE_LEVEL_LOW:
edge = GPIO_INT_LOW_LEV;
@@ -180,11 +180,11 @@
return -EINVAL;
}
- reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
- bit = gpio & 0xf;
+ reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* ICR1 or ICR2 */
+ bit = gpio_idx & 0xf;
val = readl(reg) & ~(0x3 << (bit << 1));
writel(val | (edge << (bit << 1)), reg);
- writel(1 << (gpio & 0x1f), port->base + GPIO_ISR);
+ writel(1 << gpio_idx, port->base + GPIO_ISR);
return 0;
}
@@ -217,15 +217,13 @@
/* handle 32 interrupts in one status register */
static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
{
- u32 gpio_irq_no_base = port->virtual_irq_start;
-
while (irq_stat != 0) {
int irqoffset = fls(irq_stat) - 1;
if (port->both_edges & (1 << irqoffset))
mxc_flip_edge(port, irqoffset);
- generic_handle_irq(gpio_irq_no_base + irqoffset);
+ generic_handle_irq(irq_find_mapping(port->domain, irqoffset));
irq_stat &= ~(1 << irqoffset);
}
@@ -276,10 +274,9 @@
*/
static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
{
- u32 gpio = irq_to_gpio(d->irq);
- u32 gpio_idx = gpio & 0x1F;
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct mxc_gpio_port *port = gc->private;
+ u32 gpio_idx = d->hwirq;
if (enable) {
if (port->irq_high && (gpio_idx >= 16))
@@ -296,12 +293,12 @@
return 0;
}
-static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port)
+static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
- gc = irq_alloc_generic_chip("gpio-mxc", 1, port->virtual_irq_start,
+ gc = irq_alloc_generic_chip("gpio-mxc", 1, irq_base,
port->base, handle_level_irq);
gc->private = port;
@@ -352,7 +349,7 @@
struct mxc_gpio_port *port =
container_of(bgc, struct mxc_gpio_port, bgc);
- return port->virtual_irq_start + offset;
+ return irq_find_mapping(port->domain, offset);
}
static int __devinit mxc_gpio_probe(struct platform_device *pdev)
@@ -360,6 +357,7 @@
struct device_node *np = pdev->dev.of_node;
struct mxc_gpio_port *port;
struct resource *iores;
+ int irq_base;
int err;
mxc_gpio_get_hw(pdev);
@@ -432,20 +430,30 @@
if (err)
goto out_bgpio_remove;
- /*
- * In dt case, we use gpio number range dynamically
- * allocated by gpio core.
- */
- port->virtual_irq_start = MXC_GPIO_IRQ_START + (np ? port->bgc.gc.base :
- pdev->id * 32);
+ irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
+ if (irq_base < 0) {
+ err = irq_base;
+ goto out_gpiochip_remove;
+ }
+
+ port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ if (!port->domain) {
+ err = -ENODEV;
+ goto out_irqdesc_free;
+ }
/* gpio-mxc can be a generic irq chip */
- mxc_gpio_init_gc(port);
+ mxc_gpio_init_gc(port, irq_base);
list_add_tail(&port->node, &mxc_gpio_ports);
return 0;
+out_irqdesc_free:
+ irq_free_descs(irq_base, 32);
+out_gpiochip_remove:
+ WARN_ON(gpiochip_remove(&port->bgc.gc) < 0);
out_bgpio_remove:
bgpio_remove(&port->bgc);
out_iounmap:
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 8d6b504..370031a 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -53,7 +53,6 @@
#include <linux/of_i2c.h>
#include <linux/pinctrl/consumer.h>
-#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 4296a83..d2e6f82 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -43,6 +43,7 @@
#include <asm/fiq.h>
#include <mach/dma-mx1-mx2.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include <mach/mx1_camera.h>
/*
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 4ef7473..d5c689d6 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -169,7 +169,6 @@
#define SERIAL_IMX_MAJOR 207
#define MINOR_START 16
#define DEV_NAME "ttymxc"
-#define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS
/*
* This determines how often we check the modem status signals
@@ -741,10 +740,7 @@
/* do not use RTS IRQ on IrDA */
if (!USE_IRDA(sport)) {
- retval = request_irq(sport->rtsirq, imx_rtsint,
- (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
- IRQF_TRIGGER_FALLING |
- IRQF_TRIGGER_RISING,
+ retval = request_irq(sport->rtsirq, imx_rtsint, 0,
DRIVER_NAME, sport);
if (retval)
goto error_out3;
diff --git a/sound/soc/fsl/imx-pcm-fiq.c b/sound/soc/fsl/imx-pcm-fiq.c
index 456b7d7..ee27ba3 100644
--- a/sound/soc/fsl/imx-pcm-fiq.c
+++ b/sound/soc/fsl/imx-pcm-fiq.c
@@ -29,6 +29,7 @@
#include <asm/fiq.h>
+#include <mach/irqs.h>
#include <mach/ssi.h>
#include "imx-ssi.h"
