// SPDX-License-Identifier: GPL-2.0
/* Copyright(c) 2009-2013  Realtek Corporation.*/

#include "../pwrseqcmd.h"
#include "pwrseq.h"

/* drivers should parse below arrays and do the corresponding actions */
/*3 Power on  Array*/
struct wlan_pwr_cfg rtl8188ee_power_on_flow[RTL8188EE_TRANS_CARDEMU_TO_ACT_STEPS
					+ RTL8188EE_TRANS_END_STEPS] = {
	RTL8188EE_TRANS_CARDEMU_TO_ACT
	RTL8188EE_TRANS_END
};

/*3Radio off GPIO Array */
struct wlan_pwr_cfg rtl8188ee_radio_off_flow[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS
					+ RTL8188EE_TRANS_END_STEPS] = {
	RTL8188EE_TRANS_ACT_TO_CARDEMU
	RTL8188EE_TRANS_END
};

/*3Card Disable Array*/
struct wlan_pwr_cfg rtl8188ee_card_disable_flow
		[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
		 RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS +
		 RTL8188EE_TRANS_END_STEPS] = {
	RTL8188EE_TRANS_ACT_TO_CARDEMU
	RTL8188EE_TRANS_CARDEMU_TO_CARDDIS
	RTL8188EE_TRANS_END
};

/*3 Card Enable Array*/
struct wlan_pwr_cfg rtl8188ee_card_enable_flow
		[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
		 RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS +
		 RTL8188EE_TRANS_END_STEPS] = {
	RTL8188EE_TRANS_CARDDIS_TO_CARDEMU
	RTL8188EE_TRANS_CARDEMU_TO_ACT
	RTL8188EE_TRANS_END
};

/*3Suspend Array*/
struct wlan_pwr_cfg rtl8188ee_suspend_flow[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS
					+ RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS
					+ RTL8188EE_TRANS_END_STEPS] = {
	RTL8188EE_TRANS_ACT_TO_CARDEMU
	RTL8188EE_TRANS_CARDEMU_TO_SUS
	RTL8188EE_TRANS_END
};

/*3 Resume Array*/
struct wlan_pwr_cfg rtl8188ee_resume_flow[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS
					+ RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS
					+ RTL8188EE_TRANS_END_STEPS] = {
	RTL8188EE_TRANS_SUS_TO_CARDEMU
	RTL8188EE_TRANS_CARDEMU_TO_ACT
	RTL8188EE_TRANS_END
};

/*3HWPDN Array*/
struct wlan_pwr_cfg rtl8188ee_hwpdn_flow[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS
				+ RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS
				+ RTL8188EE_TRANS_END_STEPS] = {
	RTL8188EE_TRANS_ACT_TO_CARDEMU
	RTL8188EE_TRANS_CARDEMU_TO_PDN
	RTL8188EE_TRANS_END
};

/*3 Enter LPS */
struct wlan_pwr_cfg rtl8188ee_enter_lps_flow[RTL8188EE_TRANS_ACT_TO_LPS_STEPS
					+ RTL8188EE_TRANS_END_STEPS] = {
	/*FW behavior*/
	RTL8188EE_TRANS_ACT_TO_LPS
	RTL8188EE_TRANS_END
};

/*3 Leave LPS */
struct wlan_pwr_cfg rtl8188ee_leave_lps_flow[RTL8188EE_TRANS_LPS_TO_ACT_STEPS
					+ RTL8188EE_TRANS_END_STEPS] = {
	/*FW behavior*/
	RTL8188EE_TRANS_LPS_TO_ACT
	RTL8188EE_TRANS_END
};