PCI: Make current and maximum bus speeds part of the PCI core
Move the max_bus_speed and cur_bus_speed into the pci_bus. Expose the
values through the PCI slot driver instead of the hotplug slot driver.
Update all the hotplug drivers to use the pci_bus instead of their own
data structures.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 4dd7114..efa9f2d 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -332,8 +332,6 @@
slot->hotplug_slot->info->attention_status = 0;
slot->hotplug_slot->info->latch_status = acpiphp_get_latch_status(slot->acpi_slot);
slot->hotplug_slot->info->adapter_status = acpiphp_get_adapter_status(slot->acpi_slot);
- slot->hotplug_slot->info->max_bus_speed = PCI_SPEED_UNKNOWN;
- slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
acpiphp_slot->slot = slot;
snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun);
diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h
index 9c6a9fd..d8ffc73 100644
--- a/drivers/pci/hotplug/cpqphp.h
+++ b/drivers/pci/hotplug/cpqphp.h
@@ -310,8 +310,6 @@
u8 first_slot;
u8 add_support;
u8 push_flag;
- enum pci_bus_speed speed;
- enum pci_bus_speed speed_capability;
u8 push_button; /* 0 = no pushbutton, 1 = pushbutton present */
u8 slot_switch_type; /* 0 = no switch, 1 = switch present */
u8 defeature_PHP; /* 0 = PHP not supported, 1 = PHP supported */
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index 075b4f4..f184d1d 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -583,30 +583,6 @@
return 0;
}
-static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
- struct slot *slot = hotplug_slot->private;
- struct controller *ctrl = slot->ctrl;
-
- dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
-
- *value = ctrl->speed_capability;
-
- return 0;
-}
-
-static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
- struct slot *slot = hotplug_slot->private;
- struct controller *ctrl = slot->ctrl;
-
- dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
-
- *value = ctrl->speed;
-
- return 0;
-}
-
static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
.set_attention_status = set_attention_status,
.enable_slot = process_SI,
@@ -616,8 +592,6 @@
.get_attention_status = get_attention_status,
.get_latch_status = get_latch_status,
.get_adapter_status = get_adapter_status,
- .get_max_bus_speed = get_max_bus_speed,
- .get_cur_bus_speed = get_cur_bus_speed,
};
#define SLOT_NAME_SIZE 10
@@ -629,6 +603,7 @@
struct slot *slot;
struct hotplug_slot *hotplug_slot;
struct hotplug_slot_info *hotplug_slot_info;
+ struct pci_bus *bus = ctrl->pci_bus;
u8 number_of_slots;
u8 slot_device;
u8 slot_number;
@@ -694,7 +669,7 @@
slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
if (is_slot66mhz(slot))
slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
- if (ctrl->speed == PCI_SPEED_66MHz)
+ if (bus->cur_bus_speed == PCI_SPEED_66MHz)
slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
ctrl_slot =
@@ -844,6 +819,7 @@
u32 rc;
struct controller *ctrl;
struct pci_func *func;
+ struct pci_bus *bus;
int err;
err = pci_enable_device(pdev);
@@ -852,6 +828,7 @@
pci_name(pdev), err);
return err;
}
+ bus = pdev->subordinate;
/* Need to read VID early b/c it's used to differentiate CPQ and INTC
* discovery
@@ -929,22 +906,22 @@
pci_read_config_byte(pdev, 0x41, &bus_cap);
if (bus_cap & 0x80) {
dbg("bus max supports 133MHz PCI-X\n");
- ctrl->speed_capability = PCI_SPEED_133MHz_PCIX;
+ bus->max_bus_speed = PCI_SPEED_133MHz_PCIX;
break;
}
if (bus_cap & 0x40) {
dbg("bus max supports 100MHz PCI-X\n");
- ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+ bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
break;
}
if (bus_cap & 20) {
dbg("bus max supports 66MHz PCI-X\n");
- ctrl->speed_capability = PCI_SPEED_66MHz_PCIX;
+ bus->max_bus_speed = PCI_SPEED_66MHz_PCIX;
break;
}
if (bus_cap & 10) {
dbg("bus max supports 66MHz PCI\n");
- ctrl->speed_capability = PCI_SPEED_66MHz;
+ bus->max_bus_speed = PCI_SPEED_66MHz;
break;
}
@@ -955,7 +932,7 @@
case PCI_SUB_HPC_ID:
/* Original 6500/7000 implementation */
ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_33MHz;
+ bus->max_bus_speed = PCI_SPEED_33MHz;
ctrl->push_button = 0;
ctrl->pci_config_space = 1;
ctrl->defeature_PHP = 1;
@@ -966,7 +943,7 @@
/* First Pushbutton implementation */
ctrl->push_flag = 1;
ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_33MHz;
+ bus->max_bus_speed = PCI_SPEED_33MHz;
ctrl->push_button = 1;
ctrl->pci_config_space = 1;
ctrl->defeature_PHP = 1;
@@ -976,7 +953,7 @@
case PCI_SUB_HPC_ID_INTC:
/* Third party (6500/7000) */
ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_33MHz;
+ bus->max_bus_speed = PCI_SPEED_33MHz;
ctrl->push_button = 0;
ctrl->pci_config_space = 1;
ctrl->defeature_PHP = 1;
@@ -987,7 +964,7 @@
/* First 66 Mhz implementation */
ctrl->push_flag = 1;
ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_66MHz;
+ bus->max_bus_speed = PCI_SPEED_66MHz;
ctrl->push_button = 1;
ctrl->pci_config_space = 1;
ctrl->defeature_PHP = 1;
@@ -998,7 +975,7 @@
/* First PCI-X implementation, 100MHz */
ctrl->push_flag = 1;
ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+ bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
ctrl->push_button = 1;
ctrl->pci_config_space = 1;
ctrl->defeature_PHP = 1;
@@ -1015,9 +992,9 @@
case PCI_VENDOR_ID_INTEL:
/* Check for speed capability (0=33, 1=66) */
if (subsystem_deviceid & 0x0001)
- ctrl->speed_capability = PCI_SPEED_66MHz;
+ bus->max_bus_speed = PCI_SPEED_66MHz;
else
- ctrl->speed_capability = PCI_SPEED_33MHz;
+ bus->max_bus_speed = PCI_SPEED_33MHz;
/* Check for push button */
if (subsystem_deviceid & 0x0002)
@@ -1079,7 +1056,7 @@
pdev->bus->number);
dbg("Hotplug controller capabilities:\n");
- dbg(" speed_capability %d\n", ctrl->speed_capability);
+ dbg(" speed_capability %d\n", bus->max_bus_speed);
dbg(" slot_switch_type %s\n", ctrl->slot_switch_type ?
"switch present" : "no switch");
dbg(" defeature_PHP %s\n", ctrl->defeature_PHP ?
@@ -1142,7 +1119,7 @@
}
/* Check for 66Mhz operation */
- ctrl->speed = get_controller_speed(ctrl);
+ bus->cur_bus_speed = get_controller_speed(ctrl);
/********************************************************
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 0ff689a..e43908d 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -1130,12 +1130,13 @@
static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot)
{
struct slot *slot;
+ struct pci_bus *bus = ctrl->pci_bus;
u8 reg;
u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER);
u16 reg16;
u32 leds = readl(ctrl->hpc_reg + LED_CONTROL);
- if (ctrl->speed == adapter_speed)
+ if (bus->cur_bus_speed == adapter_speed)
return 0;
/* We don't allow freq/mode changes if we find another adapter running
@@ -1152,7 +1153,7 @@
* lower speed/mode, we allow the new adapter to function at
* this rate if supported
*/
- if (ctrl->speed < adapter_speed)
+ if (bus->cur_bus_speed < adapter_speed)
return 0;
return 1;
@@ -1161,20 +1162,20 @@
/* If the controller doesn't support freq/mode changes and the
* controller is running at a higher mode, we bail
*/
- if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability))
+ if ((bus->cur_bus_speed > adapter_speed) && (!ctrl->pcix_speed_capability))
return 1;
/* But we allow the adapter to run at a lower rate if possible */
- if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability))
+ if ((bus->cur_bus_speed < adapter_speed) && (!ctrl->pcix_speed_capability))
return 0;
/* We try to set the max speed supported by both the adapter and
* controller
*/
- if (ctrl->speed_capability < adapter_speed) {
- if (ctrl->speed == ctrl->speed_capability)
+ if (bus->max_bus_speed < adapter_speed) {
+ if (bus->cur_bus_speed == bus->max_bus_speed)
return 0;
- adapter_speed = ctrl->speed_capability;
+ adapter_speed = bus->max_bus_speed;
}
writel(0x0L, ctrl->hpc_reg + LED_CONTROL);
@@ -1229,8 +1230,8 @@
pci_write_config_byte(ctrl->pci_dev, 0x43, reg);
/* Only if mode change...*/
- if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
- ((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
+ if (((bus->cur_bus_speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
+ ((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
set_SOGO(ctrl);
wait_for_ctrl_irq(ctrl);
@@ -1243,7 +1244,7 @@
set_SOGO(ctrl);
wait_for_ctrl_irq(ctrl);
- ctrl->speed = adapter_speed;
+ bus->cur_bus_speed = adapter_speed;
slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
info("Successfully changed frequency/mode for adapter in slot %d\n",
@@ -1269,6 +1270,7 @@
*/
static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
{
+ struct pci_bus *bus = ctrl->pci_bus;
u8 hp_slot;
u8 temp_byte;
u8 adapter_speed;
@@ -1309,7 +1311,7 @@
wait_for_ctrl_irq (ctrl);
adapter_speed = get_adapter_speed(ctrl, hp_slot);
- if (ctrl->speed != adapter_speed)
+ if (bus->cur_bus_speed != adapter_speed)
if (set_controller_speed(ctrl, adapter_speed, hp_slot))
rc = WRONG_BUS_FREQUENCY;
@@ -1426,6 +1428,7 @@
u32 temp_register = 0xFFFFFFFF;
u32 rc = 0;
struct pci_func *new_slot = NULL;
+ struct pci_bus *bus = ctrl->pci_bus;
struct slot *p_slot;
struct resource_lists res_lists;
@@ -1456,7 +1459,7 @@
wait_for_ctrl_irq (ctrl);
adapter_speed = get_adapter_speed(ctrl, hp_slot);
- if (ctrl->speed != adapter_speed)
+ if (bus->cur_bus_speed != adapter_speed)
if (set_controller_speed(ctrl, adapter_speed, hp_slot))
rc = WRONG_BUS_FREQUENCY;
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index 7485ffd..d934dd4 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -395,89 +395,40 @@
return rc;
}
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+static int get_max_bus_speed(struct slot *slot)
{
- int rc = -ENODEV;
- struct slot *pslot;
+ int rc;
u8 mode = 0;
+ enum pci_bus_speed speed;
+ struct pci_bus *bus = slot->hotplug_slot->pci_slot->bus;
- debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__,
- hotplug_slot, value);
+ debug("%s - Entry slot[%p]\n", __func__, slot);
ibmphp_lock_operations();
+ mode = slot->supported_bus_mode;
+ speed = slot->supported_speed;
+ ibmphp_unlock_operations();
- if (hotplug_slot) {
- pslot = hotplug_slot->private;
- if (pslot) {
- rc = 0;
- mode = pslot->supported_bus_mode;
- *value = pslot->supported_speed;
- switch (*value) {
- case BUS_SPEED_33:
- break;
- case BUS_SPEED_66:
- if (mode == BUS_MODE_PCIX)
- *value += 0x01;
- break;
- case BUS_SPEED_100:
- case BUS_SPEED_133:
- *value = pslot->supported_speed + 0x01;
- break;
- default:
- /* Note (will need to change): there would be soon 256, 512 also */
- rc = -ENODEV;
- }
- }
+ switch (speed) {
+ case BUS_SPEED_33:
+ break;
+ case BUS_SPEED_66:
+ if (mode == BUS_MODE_PCIX)
+ speed += 0x01;
+ break;
+ case BUS_SPEED_100:
+ case BUS_SPEED_133:
+ speed += 0x01;
+ break;
+ default:
+ /* Note (will need to change): there would be soon 256, 512 also */
+ rc = -ENODEV;
}
- ibmphp_unlock_operations();
- debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value);
- return rc;
-}
+ if (!rc)
+ bus->max_bus_speed = speed;
-static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
- int rc = -ENODEV;
- struct slot *pslot;
- u8 mode = 0;
-
- debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__,
- hotplug_slot, value);
-
- ibmphp_lock_operations();
-
- if (hotplug_slot) {
- pslot = hotplug_slot->private;
- if (pslot) {
- rc = get_cur_bus_info(&pslot);
- if (!rc) {
- mode = pslot->bus_on->current_bus_mode;
- *value = pslot->bus_on->current_speed;
- switch (*value) {
- case BUS_SPEED_33:
- break;
- case BUS_SPEED_66:
- if (mode == BUS_MODE_PCIX)
- *value += 0x01;
- else if (mode == BUS_MODE_PCI)
- ;
- else
- *value = PCI_SPEED_UNKNOWN;
- break;
- case BUS_SPEED_100:
- case BUS_SPEED_133:
- *value += 0x01;
- break;
- default:
- /* Note of change: there would also be 256, 512 soon */
- rc = -ENODEV;
- }
- }
- }
- }
-
- ibmphp_unlock_operations();
- debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value);
+ debug("%s - Exit rc[%d] speed[%x]\n", __func__, rc, speed);
return rc;
}
@@ -572,6 +523,7 @@
if (slot_cur->bus_on->current_speed == 0xFF)
if (get_cur_bus_info(&slot_cur))
return -1;
+ get_max_bus_speed(slot_cur);
if (slot_cur->ctrl->options == 0xFF)
if (get_hpc_options(slot_cur, &slot_cur->ctrl->options))
@@ -655,6 +607,7 @@
int ibmphp_update_slot_info(struct slot *slot_cur)
{
struct hotplug_slot_info *info;
+ struct pci_bus *bus = slot_cur->hotplug_slot->pci_slot->bus;
int rc;
u8 bus_speed;
u8 mode;
@@ -700,8 +653,7 @@
bus_speed = PCI_SPEED_UNKNOWN;
}
- info->cur_bus_speed = bus_speed;
- info->max_bus_speed = slot_cur->hotplug_slot->info->max_bus_speed;
+ bus->cur_bus_speed = bus_speed;
// To do: bus_names
rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info);
@@ -1326,8 +1278,6 @@
.get_attention_status = get_attention_status,
.get_latch_status = get_latch_status,
.get_adapter_status = get_adapter_present,
- .get_max_bus_speed = get_max_bus_speed,
- .get_cur_bus_speed = get_cur_bus_speed,
/* .get_max_adapter_speed = get_max_adapter_speed,
.get_bus_name_status = get_bus_name,
*/
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 38183a53..728b119 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -64,32 +64,6 @@
static LIST_HEAD(pci_hotplug_slot_list);
static DEFINE_MUTEX(pci_hp_mutex);
-/* these strings match up with the values in pci_bus_speed */
-static char *pci_bus_speed_strings[] = {
- "33 MHz PCI", /* 0x00 */
- "66 MHz PCI", /* 0x01 */
- "66 MHz PCI-X", /* 0x02 */
- "100 MHz PCI-X", /* 0x03 */
- "133 MHz PCI-X", /* 0x04 */
- NULL, /* 0x05 */
- NULL, /* 0x06 */
- NULL, /* 0x07 */
- NULL, /* 0x08 */
- "66 MHz PCI-X 266", /* 0x09 */
- "100 MHz PCI-X 266", /* 0x0a */
- "133 MHz PCI-X 266", /* 0x0b */
- NULL, /* 0x0c */
- NULL, /* 0x0d */
- NULL, /* 0x0e */
- NULL, /* 0x0f */
- NULL, /* 0x10 */
- "66 MHz PCI-X 533", /* 0x11 */
- "100 MHz PCI-X 533", /* 0x12 */
- "133 MHz PCI-X 533", /* 0x13 */
- "2.5 GT/s PCIe", /* 0x14 */
- "5.0 GT/s PCIe", /* 0x15 */
-};
-
#ifdef CONFIG_HOTPLUG_PCI_CPCI
extern int cpci_hotplug_init(int debug);
extern void cpci_hotplug_exit(void);
@@ -118,8 +92,6 @@
GET_STATUS(attention_status, u8)
GET_STATUS(latch_status, u8)
GET_STATUS(adapter_status, u8)
-GET_STATUS(max_bus_speed, enum pci_bus_speed)
-GET_STATUS(cur_bus_speed, enum pci_bus_speed)
static ssize_t power_read_file(struct pci_slot *slot, char *buf)
{
@@ -263,60 +235,6 @@
.show = presence_read_file,
};
-static char *unknown_speed = "Unknown bus speed";
-
-static ssize_t max_bus_speed_read_file(struct pci_slot *slot, char *buf)
-{
- char *speed_string;
- int retval;
- enum pci_bus_speed value;
-
- retval = get_max_bus_speed(slot->hotplug, &value);
- if (retval)
- goto exit;
-
- if (value == PCI_SPEED_UNKNOWN)
- speed_string = unknown_speed;
- else
- speed_string = pci_bus_speed_strings[value];
-
- retval = sprintf (buf, "%s\n", speed_string);
-
-exit:
- return retval;
-}
-
-static struct pci_slot_attribute hotplug_slot_attr_max_bus_speed = {
- .attr = {.name = "max_bus_speed", .mode = S_IFREG | S_IRUGO},
- .show = max_bus_speed_read_file,
-};
-
-static ssize_t cur_bus_speed_read_file(struct pci_slot *slot, char *buf)
-{
- char *speed_string;
- int retval;
- enum pci_bus_speed value;
-
- retval = get_cur_bus_speed(slot->hotplug, &value);
- if (retval)
- goto exit;
-
- if (value == PCI_SPEED_UNKNOWN)
- speed_string = unknown_speed;
- else
- speed_string = pci_bus_speed_strings[value];
-
- retval = sprintf (buf, "%s\n", speed_string);
-
-exit:
- return retval;
-}
-
-static struct pci_slot_attribute hotplug_slot_attr_cur_bus_speed = {
- .attr = {.name = "cur_bus_speed", .mode = S_IFREG | S_IRUGO},
- .show = cur_bus_speed_read_file,
-};
-
static ssize_t test_write_file(struct pci_slot *pci_slot, const char *buf,
size_t count)
{
@@ -391,26 +309,6 @@
return false;
}
-static bool has_max_bus_speed_file(struct pci_slot *pci_slot)
-{
- struct hotplug_slot *slot = pci_slot->hotplug;
- if ((!slot) || (!slot->ops))
- return false;
- if (slot->ops->get_max_bus_speed)
- return true;
- return false;
-}
-
-static bool has_cur_bus_speed_file(struct pci_slot *pci_slot)
-{
- struct hotplug_slot *slot = pci_slot->hotplug;
- if ((!slot) || (!slot->ops))
- return false;
- if (slot->ops->get_cur_bus_speed)
- return true;
- return false;
-}
-
static bool has_test_file(struct pci_slot *pci_slot)
{
struct hotplug_slot *slot = pci_slot->hotplug;
@@ -456,20 +354,6 @@
goto exit_adapter;
}
- if (has_max_bus_speed_file(slot)) {
- retval = sysfs_create_file(&slot->kobj,
- &hotplug_slot_attr_max_bus_speed.attr);
- if (retval)
- goto exit_max_speed;
- }
-
- if (has_cur_bus_speed_file(slot)) {
- retval = sysfs_create_file(&slot->kobj,
- &hotplug_slot_attr_cur_bus_speed.attr);
- if (retval)
- goto exit_cur_speed;
- }
-
if (has_test_file(slot)) {
retval = sysfs_create_file(&slot->kobj,
&hotplug_slot_attr_test.attr);
@@ -480,14 +364,6 @@
goto exit;
exit_test:
- if (has_cur_bus_speed_file(slot))
- sysfs_remove_file(&slot->kobj,
- &hotplug_slot_attr_cur_bus_speed.attr);
-exit_cur_speed:
- if (has_max_bus_speed_file(slot))
- sysfs_remove_file(&slot->kobj,
- &hotplug_slot_attr_max_bus_speed.attr);
-exit_max_speed:
if (has_adapter_file(slot))
sysfs_remove_file(&slot->kobj,
&hotplug_slot_attr_presence.attr);
@@ -523,14 +399,6 @@
sysfs_remove_file(&slot->kobj,
&hotplug_slot_attr_presence.attr);
- if (has_max_bus_speed_file(slot))
- sysfs_remove_file(&slot->kobj,
- &hotplug_slot_attr_max_bus_speed.attr);
-
- if (has_cur_bus_speed_file(slot))
- sysfs_remove_file(&slot->kobj,
- &hotplug_slot_attr_cur_bus_speed.attr);
-
if (has_test_file(slot))
sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_test.attr);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 5674b20..920f820 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -69,8 +69,6 @@
static int get_attention_status (struct hotplug_slot *slot, u8 *value);
static int get_latch_status (struct hotplug_slot *slot, u8 *value);
static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
-static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
-static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
/**
* release_slot - free up the memory used by a slot
@@ -113,8 +111,6 @@
ops->disable_slot = disable_slot;
ops->get_power_status = get_power_status;
ops->get_adapter_status = get_adapter_status;
- ops->get_max_bus_speed = get_max_bus_speed;
- ops->get_cur_bus_speed = get_cur_bus_speed;
if (MRL_SENS(ctrl))
ops->get_latch_status = get_latch_status;
if (ATTN_LED(ctrl)) {
@@ -227,27 +223,6 @@
return pciehp_get_adapter_status(slot, value);
}
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
- enum pci_bus_speed *value)
-{
- struct slot *slot = hotplug_slot->private;
-
- ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
- __func__, slot_name(slot));
-
- return pciehp_get_max_link_speed(slot, value);
-}
-
-static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
- struct slot *slot = hotplug_slot->private;
-
- ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
- __func__, slot_name(slot));
-
- return pciehp_get_cur_link_speed(slot, value);
-}
-
static int pciehp_probe(struct pcie_device *dev)
{
int rc;
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 6744ca1..40b48f5 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -492,6 +492,7 @@
u16 slot_cmd;
u16 cmd_mask;
u16 slot_status;
+ u16 lnk_status;
int retval = 0;
/* Clear sticky power-fault bit from previous power failures */
@@ -523,6 +524,14 @@
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);
+ retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
+ if (retval) {
+ ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n",
+ __func__);
+ return retval;
+ }
+ pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
+
return retval;
}
@@ -610,37 +619,6 @@
return IRQ_HANDLED;
}
-int pciehp_get_max_link_speed(struct slot *slot, enum pci_bus_speed *value)
-{
- struct controller *ctrl = slot->ctrl;
- enum pci_bus_speed lnk_speed;
- u32 lnk_cap;
- int retval = 0;
-
- retval = pciehp_readl(ctrl, PCI_EXP_LNKCAP, &lnk_cap);
- if (retval) {
- ctrl_err(ctrl, "%s: Cannot read LNKCAP register\n", __func__);
- return retval;
- }
-
- switch (lnk_cap & 0x000F) {
- case 1:
- lnk_speed = PCIE_SPEED_2_5GT;
- break;
- case 2:
- lnk_speed = PCIE_SPEED_5_0GT;
- break;
- default:
- lnk_speed = PCI_SPEED_UNKNOWN;
- break;
- }
-
- *value = lnk_speed;
- ctrl_dbg(ctrl, "Max link speed = %d\n", lnk_speed);
-
- return retval;
-}
-
int pciehp_get_max_lnk_width(struct slot *slot,
enum pcie_link_width *value)
{
@@ -691,38 +669,6 @@
return retval;
}
-int pciehp_get_cur_link_speed(struct slot *slot, enum pci_bus_speed *value)
-{
- struct controller *ctrl = slot->ctrl;
- enum pci_bus_speed lnk_speed = PCI_SPEED_UNKNOWN;
- int retval = 0;
- u16 lnk_status;
-
- retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
- if (retval) {
- ctrl_err(ctrl, "%s: Cannot read LNKSTATUS register\n",
- __func__);
- return retval;
- }
-
- switch (lnk_status & PCI_EXP_LNKSTA_CLS) {
- case 1:
- lnk_speed = PCIE_SPEED_2_5GT;
- break;
- case 2:
- lnk_speed = PCIE_SPEED_5_0GT;
- break;
- default:
- lnk_speed = PCI_SPEED_UNKNOWN;
- break;
- }
-
- *value = lnk_speed;
- ctrl_dbg(ctrl, "Current link speed = %d\n", lnk_speed);
-
- return retval;
-}
-
int pciehp_get_cur_lnk_width(struct slot *slot,
enum pcie_link_width *value)
{
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index c159223..b14e5e6 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -130,10 +130,9 @@
return 0;
}
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+static enum pci_bus_speed get_max_bus_speed(struct slot *slot)
{
- struct slot *slot = (struct slot *)hotplug_slot->private;
-
+ enum pci_bus_speed speed;
switch (slot->type) {
case 1:
case 2:
@@ -141,30 +140,30 @@
case 4:
case 5:
case 6:
- *value = PCI_SPEED_33MHz; /* speed for case 1-6 */
+ speed = PCI_SPEED_33MHz; /* speed for case 1-6 */
break;
case 7:
case 8:
- *value = PCI_SPEED_66MHz;
+ speed = PCI_SPEED_66MHz;
break;
case 11:
case 14:
- *value = PCI_SPEED_66MHz_PCIX;
+ speed = PCI_SPEED_66MHz_PCIX;
break;
case 12:
case 15:
- *value = PCI_SPEED_100MHz_PCIX;
+ speed = PCI_SPEED_100MHz_PCIX;
break;
case 13:
case 16:
- *value = PCI_SPEED_133MHz_PCIX;
+ speed = PCI_SPEED_133MHz_PCIX;
break;
default:
- *value = PCI_SPEED_UNKNOWN;
+ speed = PCI_SPEED_UNKNOWN;
break;
-
}
- return 0;
+
+ return speed;
}
static int get_children_props(struct device_node *dn, const int **drc_indexes,
@@ -408,6 +407,8 @@
slot->state = NOT_VALID;
return -EINVAL;
}
+
+ slot->bus->max_bus_speed = get_max_bus_speed(slot);
return 0;
}
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index 8e210cd7..d2627e1 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -333,8 +333,6 @@
int (*set_attention_status)(struct slot *slot, u8 status);
int (*get_latch_status)(struct slot *slot, u8 *status);
int (*get_adapter_status)(struct slot *slot, u8 *status);
- int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
- int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
int (*get_adapter_speed)(struct slot *slot, enum pci_bus_speed *speed);
int (*get_mode1_ECC_cap)(struct slot *slot, u8 *mode);
int (*get_prog_int)(struct slot *slot, u8 *prog_int);
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 8a520a3d..a506229 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -65,8 +65,6 @@
static int get_attention_status (struct hotplug_slot *slot, u8 *value);
static int get_latch_status (struct hotplug_slot *slot, u8 *value);
static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
-static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
-static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
static struct hotplug_slot_ops shpchp_hotplug_slot_ops = {
.set_attention_status = set_attention_status,
@@ -76,8 +74,6 @@
.get_attention_status = get_attention_status,
.get_latch_status = get_latch_status,
.get_adapter_status = get_adapter_status,
- .get_max_bus_speed = get_max_bus_speed,
- .get_cur_bus_speed = get_cur_bus_speed,
};
/**
@@ -279,37 +275,6 @@
return 0;
}
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
- enum pci_bus_speed *value)
-{
- struct slot *slot = get_slot(hotplug_slot);
- int retval;
-
- ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
- __func__, slot_name(slot));
-
- retval = slot->hpc_ops->get_max_bus_speed(slot, value);
- if (retval < 0)
- *value = PCI_SPEED_UNKNOWN;
-
- return 0;
-}
-
-static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
- struct slot *slot = get_slot(hotplug_slot);
- int retval;
-
- ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
- __func__, slot_name(slot));
-
- retval = slot->hpc_ops->get_cur_bus_speed(slot, value);
- if (retval < 0)
- *value = PCI_SPEED_UNKNOWN;
-
- return 0;
-}
-
static int is_shpc_capable(struct pci_dev *dev)
{
if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device ==
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index b8ab279..179b1c1 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -285,17 +285,8 @@
return WRONG_BUS_FREQUENCY;
}
- rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp);
- if (rc) {
- ctrl_err(ctrl, "Can't get bus operation speed\n");
- return WRONG_BUS_FREQUENCY;
- }
-
- rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp);
- if (rc) {
- ctrl_err(ctrl, "Can't get max bus operation speed\n");
- msp = bsp;
- }
+ bsp = ctrl->pci_dev->bus->cur_bus_speed;
+ msp = ctrl->pci_dev->bus->max_bus_speed;
/* Check if there are other slots or devices on the same bus */
if (!list_empty(&ctrl->pci_dev->subordinate->devices))
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 86dc398..5f5e8d2 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -660,6 +660,75 @@
return retval;
}
+static int shpc_get_cur_bus_speed(struct controller *ctrl)
+{
+ int retval = 0;
+ struct pci_bus *bus = ctrl->pci_dev->subordinate;
+ enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
+ u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG);
+ u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
+ u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
+
+ if ((pi == 1) && (speed_mode > 4)) {
+ retval = -ENODEV;
+ goto out;
+ }
+
+ switch (speed_mode) {
+ case 0x0:
+ bus_speed = PCI_SPEED_33MHz;
+ break;
+ case 0x1:
+ bus_speed = PCI_SPEED_66MHz;
+ break;
+ case 0x2:
+ bus_speed = PCI_SPEED_66MHz_PCIX;
+ break;
+ case 0x3:
+ bus_speed = PCI_SPEED_100MHz_PCIX;
+ break;
+ case 0x4:
+ bus_speed = PCI_SPEED_133MHz_PCIX;
+ break;
+ case 0x5:
+ bus_speed = PCI_SPEED_66MHz_PCIX_ECC;
+ break;
+ case 0x6:
+ bus_speed = PCI_SPEED_100MHz_PCIX_ECC;
+ break;
+ case 0x7:
+ bus_speed = PCI_SPEED_133MHz_PCIX_ECC;
+ break;
+ case 0x8:
+ bus_speed = PCI_SPEED_66MHz_PCIX_266;
+ break;
+ case 0x9:
+ bus_speed = PCI_SPEED_100MHz_PCIX_266;
+ break;
+ case 0xa:
+ bus_speed = PCI_SPEED_133MHz_PCIX_266;
+ break;
+ case 0xb:
+ bus_speed = PCI_SPEED_66MHz_PCIX_533;
+ break;
+ case 0xc:
+ bus_speed = PCI_SPEED_100MHz_PCIX_533;
+ break;
+ case 0xd:
+ bus_speed = PCI_SPEED_133MHz_PCIX_533;
+ break;
+ default:
+ retval = -ENODEV;
+ break;
+ }
+
+ out:
+ bus->cur_bus_speed = bus_speed;
+ dbg("Current bus speed = %d\n", bus_speed);
+ return retval;
+}
+
+
static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
{
int retval;
@@ -720,6 +789,8 @@
retval = shpc_write_cmd(slot, 0, cmd);
if (retval)
ctrl_err(ctrl, "%s: Write command failed!\n", __func__);
+ else
+ shpc_get_cur_bus_speed(ctrl);
return retval;
}
@@ -803,10 +874,10 @@
return IRQ_HANDLED;
}
-static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
+static int shpc_get_max_bus_speed(struct controller *ctrl)
{
int retval = 0;
- struct controller *ctrl = slot->ctrl;
+ struct pci_bus *bus = ctrl->pci_dev->subordinate;
enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
u32 slot_avail1 = shpc_readl(ctrl, SLOT_AVAIL1);
@@ -842,79 +913,12 @@
retval = -ENODEV;
}
- *value = bus_speed;
+ bus->max_bus_speed = bus_speed;
ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed);
return retval;
}
-static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value)
-{
- int retval = 0;
- struct controller *ctrl = slot->ctrl;
- enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
- u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG);
- u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
- u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
-
- if ((pi == 1) && (speed_mode > 4)) {
- *value = PCI_SPEED_UNKNOWN;
- return -ENODEV;
- }
-
- switch (speed_mode) {
- case 0x0:
- *value = PCI_SPEED_33MHz;
- break;
- case 0x1:
- *value = PCI_SPEED_66MHz;
- break;
- case 0x2:
- *value = PCI_SPEED_66MHz_PCIX;
- break;
- case 0x3:
- *value = PCI_SPEED_100MHz_PCIX;
- break;
- case 0x4:
- *value = PCI_SPEED_133MHz_PCIX;
- break;
- case 0x5:
- *value = PCI_SPEED_66MHz_PCIX_ECC;
- break;
- case 0x6:
- *value = PCI_SPEED_100MHz_PCIX_ECC;
- break;
- case 0x7:
- *value = PCI_SPEED_133MHz_PCIX_ECC;
- break;
- case 0x8:
- *value = PCI_SPEED_66MHz_PCIX_266;
- break;
- case 0x9:
- *value = PCI_SPEED_100MHz_PCIX_266;
- break;
- case 0xa:
- *value = PCI_SPEED_133MHz_PCIX_266;
- break;
- case 0xb:
- *value = PCI_SPEED_66MHz_PCIX_533;
- break;
- case 0xc:
- *value = PCI_SPEED_100MHz_PCIX_533;
- break;
- case 0xd:
- *value = PCI_SPEED_133MHz_PCIX_533;
- break;
- default:
- *value = PCI_SPEED_UNKNOWN;
- retval = -ENODEV;
- break;
- }
-
- ctrl_dbg(ctrl, "Current bus speed = %d\n", bus_speed);
- return retval;
-}
-
static struct hpc_ops shpchp_hpc_ops = {
.power_on_slot = hpc_power_on_slot,
.slot_enable = hpc_slot_enable,
@@ -926,8 +930,6 @@
.get_latch_status = hpc_get_latch_status,
.get_adapter_status = hpc_get_adapter_status,
- .get_max_bus_speed = hpc_get_max_bus_speed,
- .get_cur_bus_speed = hpc_get_cur_bus_speed,
.get_adapter_speed = hpc_get_adapter_speed,
.get_mode1_ECC_cap = hpc_get_mode1_ECC_cap,
.get_prog_int = hpc_get_prog_int,
@@ -1086,6 +1088,9 @@
}
ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq);
+ shpc_get_max_bus_speed(ctrl);
+ shpc_get_cur_bus_speed(ctrl);
+
/*
* If this is the first controller to be initialized,
* initialize the shpchpd work queue
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index dd64310..51cf898 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -387,10 +387,37 @@
INIT_LIST_HEAD(&b->children);
INIT_LIST_HEAD(&b->devices);
INIT_LIST_HEAD(&b->slots);
+ b->max_bus_speed = PCI_SPEED_UNKNOWN;
+ b->cur_bus_speed = PCI_SPEED_UNKNOWN;
}
return b;
}
+static unsigned char pcie_link_speed[] = {
+ PCI_SPEED_UNKNOWN, /* 0 */
+ PCIE_SPEED_2_5GT, /* 1 */
+ PCIE_SPEED_5_0GT, /* 2 */
+ PCI_SPEED_UNKNOWN, /* 3 */
+ PCI_SPEED_UNKNOWN, /* 4 */
+ PCI_SPEED_UNKNOWN, /* 5 */
+ PCI_SPEED_UNKNOWN, /* 6 */
+ PCI_SPEED_UNKNOWN, /* 7 */
+ PCI_SPEED_UNKNOWN, /* 8 */
+ PCI_SPEED_UNKNOWN, /* 9 */
+ PCI_SPEED_UNKNOWN, /* A */
+ PCI_SPEED_UNKNOWN, /* B */
+ PCI_SPEED_UNKNOWN, /* C */
+ PCI_SPEED_UNKNOWN, /* D */
+ PCI_SPEED_UNKNOWN, /* E */
+ PCI_SPEED_UNKNOWN /* F */
+};
+
+void pcie_update_link_speed(struct pci_bus *bus, u16 linksta)
+{
+ bus->cur_bus_speed = pcie_link_speed[linksta & 0xf];
+}
+EXPORT_SYMBOL_GPL(pcie_update_link_speed);
+
static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
struct pci_dev *bridge, int busnr)
{
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 8c02b6c..6f6b8d2 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -47,6 +47,54 @@
slot->number);
}
+/* these strings match up with the values in pci_bus_speed */
+static char *pci_bus_speed_strings[] = {
+ "33 MHz PCI", /* 0x00 */
+ "66 MHz PCI", /* 0x01 */
+ "66 MHz PCI-X", /* 0x02 */
+ "100 MHz PCI-X", /* 0x03 */
+ "133 MHz PCI-X", /* 0x04 */
+ NULL, /* 0x05 */
+ NULL, /* 0x06 */
+ NULL, /* 0x07 */
+ NULL, /* 0x08 */
+ "66 MHz PCI-X 266", /* 0x09 */
+ "100 MHz PCI-X 266", /* 0x0a */
+ "133 MHz PCI-X 266", /* 0x0b */
+ NULL, /* 0x0c */
+ NULL, /* 0x0d */
+ NULL, /* 0x0e */
+ NULL, /* 0x0f */
+ NULL, /* 0x10 */
+ "66 MHz PCI-X 533", /* 0x11 */
+ "100 MHz PCI-X 533", /* 0x12 */
+ "133 MHz PCI-X 533", /* 0x13 */
+ "2.5 GT/s PCIe", /* 0x14 */
+ "5.0 GT/s PCIe", /* 0x15 */
+};
+
+static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf)
+{
+ const char *speed_string;
+
+ if (speed < ARRAY_SIZE(pci_bus_speed_strings))
+ speed_string = pci_bus_speed_strings[speed];
+ else
+ speed_string = "Unknown";
+
+ return sprintf(buf, "%s\n", speed_string);
+}
+
+static ssize_t max_speed_read_file(struct pci_slot *slot, char *buf)
+{
+ return bus_speed_read(slot->bus->max_bus_speed, buf);
+}
+
+static ssize_t cur_speed_read_file(struct pci_slot *slot, char *buf)
+{
+ return bus_speed_read(slot->bus->cur_bus_speed, buf);
+}
+
static void pci_slot_release(struct kobject *kobj)
{
struct pci_dev *dev;
@@ -66,9 +114,15 @@
static struct pci_slot_attribute pci_slot_attr_address =
__ATTR(address, (S_IFREG | S_IRUGO), address_read_file, NULL);
+static struct pci_slot_attribute pci_slot_attr_max_speed =
+ __ATTR(max_bus_speed, (S_IFREG | S_IRUGO), max_speed_read_file, NULL);
+static struct pci_slot_attribute pci_slot_attr_cur_speed =
+ __ATTR(cur_bus_speed, (S_IFREG | S_IRUGO), cur_speed_read_file, NULL);
static struct attribute *pci_slot_default_attrs[] = {
&pci_slot_attr_address.attr,
+ &pci_slot_attr_max_speed.attr,
+ &pci_slot_attr_cur_speed.attr,
NULL,
};
diff --git a/include/linux/pci.h b/include/linux/pci.h
index d76a8a0..a446097 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -380,6 +380,8 @@
unsigned char primary; /* number of primary bridge */
unsigned char secondary; /* number of secondary bridge */
unsigned char subordinate; /* max number of subordinate buses */
+ unsigned char max_bus_speed; /* enum pci_bus_speed */
+ unsigned char cur_bus_speed; /* enum pci_bus_speed */
char name[48];
@@ -610,6 +612,7 @@
struct pci_ops *ops, void *sysdata);
struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
int busnr);
+void pcie_update_link_speed(struct pci_bus *bus, u16 link_status);
struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
const char *name,
struct hotplug_slot *hotplug);
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 56251ac..5d09cba 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -63,12 +63,6 @@
* @get_adapter_status: Called to get see if an adapter is present in the slot or not.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
- * @get_max_bus_speed: Called to get the max bus speed for a slot.
- * If this field is NULL, the value passed in the struct hotplug_slot_info
- * will be used when this value is requested by a user.
- * @get_cur_bus_speed: Called to get the current bus speed for a slot.
- * If this field is NULL, the value passed in the struct hotplug_slot_info
- * will be used when this value is requested by a user.
*
* The table of function pointers that is passed to the hotplug pci core by a
* hotplug pci driver. These functions are called by the hotplug pci core when
@@ -86,17 +80,14 @@
int (*get_attention_status) (struct hotplug_slot *slot, u8 *value);
int (*get_latch_status) (struct hotplug_slot *slot, u8 *value);
int (*get_adapter_status) (struct hotplug_slot *slot, u8 *value);
- int (*get_max_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value);
- int (*get_cur_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value);
};
/**
* struct hotplug_slot_info - used to notify the hotplug pci core of the state of the slot
- * @power: if power is enabled or not (1/0)
+ * @power_status: if power is enabled or not (1/0)
* @attention_status: if the attention light is enabled or not (1/0)
* @latch_status: if the latch (if any) is open or closed (1/0)
- * @adapter_present: if there is a pci board present in the slot or not (1/0)
- * @address: (domain << 16 | bus << 8 | dev)
+ * @adapter_status: if there is a pci board present in the slot or not (1/0)
*
* Used to notify the hotplug pci core of the status of a specific slot.
*/
@@ -105,8 +96,6 @@
u8 attention_status;
u8 latch_status;
u8 adapter_status;
- enum pci_bus_speed max_bus_speed;
- enum pci_bus_speed cur_bus_speed;
};
/**
