tree fbe36ad650772a9bb43c6842cb691d8135a54e39
parent cfaaa7d010d1fc58f9717fcc8591201e741d2d49
author Romain Gantois <romain.gantois@bootlin.com> 1731420368 +0100
committer Jakub Kicinski <kuba@kernel.org> 1731640263 -0800

net: phy: dp83869: fix status reporting for 1000base-x autonegotiation

The DP83869 PHY transceiver supports converting from RGMII to 1000base-x.
In this operation mode, autonegotiation can be performed, as described in
IEEE802.3.

The DP83869 has a set of fiber-specific registers located at offset 0xc00.
When the transceiver is configured in RGMII-to-1000base-x mode, these
registers are mapped onto offset 0, which should make reading the
autonegotiation status transparent.

However, the fiber registers at offset 0xc04 and 0xc05 follow the bit
layout specified in Clause 37, and genphy_read_status() assumes a Clause 22
layout. Thus, genphy_read_status() doesn't properly read the capabilities
advertised by the link partner, resulting in incorrect link parameters.

Similarly, genphy_config_aneg() doesn't properly write advertised
capabilities.

Fix the 1000base-x autonegotiation procedure by replacing
genphy_read_status() and genphy_config_aneg() with their Clause 37
equivalents.

Fixes: a29de52ba2a1 ("net: dp83869: Add ability to advertise Fiber connection")
Cc: stable@vger.kernel.org
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://patch.msgid.link/20241112-dp83869-1000base-x-v3-1-36005f4ab0d9@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>