[POWERPC] 83xx: add MPC837x RDB platform support
primarily based on mpc837x mds code.
Signed-off-by: Joe D'Abbraccio <ljd015@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 924408c..ba28882 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -56,6 +56,12 @@
help
This option enables support for the MPC837x MDS Processor Board.
+config MPC837x_RDB
+ bool "Freescale MPC837x RDB"
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the MPC837x RDB Board.
+
config SBC834x
bool "Wind River SBC834x"
select DEFAULT_UIMAGE
@@ -92,4 +98,4 @@
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
- default y if MPC837x_MDS
+ default y if MPC837x_MDS || MPC837x_RDB
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 2d3cbab..7e6dd3e 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -11,3 +11,4 @@
obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o
obj-$(CONFIG_MPC837x_MDS) += mpc837x_mds.o
obj-$(CONFIG_SBC834x) += sbc834x.o
+obj-$(CONFIG_MPC837x_RDB) += mpc837x_rdb.o
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
new file mode 100644
index 0000000..2293ae5
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -0,0 +1,99 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc837x_rdb.c
+ *
+ * Copyright (C) 2007 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * MPC837x RDB board specific routines
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+
+#include "mpc83xx.h"
+
+extern int mpc837x_usb_cfg(void);
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc837x_rdb_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+ struct device_node *np;
+#endif
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc837x_rdb_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+ for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+ mpc83xx_add_bridge(np);
+#endif
+ mpc837x_usb_cfg();
+}
+
+static struct of_device_id mpc837x_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ {},
+};
+
+static int __init mpc837x_declare_of_platform_devices(void)
+{
+ /* Publish of_device */
+ of_platform_bus_probe(NULL, mpc837x_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(mpc837x_rdb, mpc837x_declare_of_platform_devices);
+
+static void __init mpc837x_rdb_init_IRQ(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
+ if (!np)
+ return;
+
+ ipic_init(np, 0);
+
+ /* Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ ipic_set_default_priority();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc837x_rdb_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,mpc8377rdb") ||
+ of_flat_dt_is_compatible(root, "fsl,mpc8378rdb") ||
+ of_flat_dt_is_compatible(root, "fsl,mpc8379rdb");
+}
+
+define_machine(mpc837x_rdb) {
+ .name = "MPC837x RDB",
+ .probe = mpc837x_rdb_probe,
+ .setup_arch = mpc837x_rdb_setup_arch,
+ .init_IRQ = mpc837x_rdb_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
