netxen: fix ipv6 offload and tx cleanup
o fix the ip/tcp hdr offset in tx descriptors for ipv6.
o cleanup xmit function, move the tso checks into separate function,
this reduces unnecessary endian conversions back and forth.
o optimize macros to initialize tx descriptors.
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 31311cc..acb2ac9 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -308,27 +308,16 @@
#define netxen_set_cmd_desc_ctxid(cmd_desc, var) \
((cmd_desc)->port_ctxid |= ((var) << 4 & 0xF0))
-#define netxen_set_cmd_desc_flags(cmd_desc, val) \
- (cmd_desc)->flags_opcode = ((cmd_desc)->flags_opcode & \
- ~cpu_to_le16(0x7f)) | cpu_to_le16((val) & 0x7f)
-#define netxen_set_cmd_desc_opcode(cmd_desc, val) \
- (cmd_desc)->flags_opcode = ((cmd_desc)->flags_opcode & \
- ~cpu_to_le16((u16)0x3f << 7)) | cpu_to_le16(((val) & 0x3f) << 7)
+#define netxen_set_tx_port(_desc, _port) \
+ (_desc)->port_ctxid = ((_port) & 0xf) | (((_port) << 4) & 0xf0)
-#define netxen_set_cmd_desc_num_of_buff(cmd_desc, val) \
- (cmd_desc)->num_of_buffers_total_length = \
- ((cmd_desc)->num_of_buffers_total_length & \
- ~cpu_to_le32(0xff)) | cpu_to_le32((val) & 0xff)
-#define netxen_set_cmd_desc_totallength(cmd_desc, val) \
- (cmd_desc)->num_of_buffers_total_length = \
- ((cmd_desc)->num_of_buffers_total_length & \
- ~cpu_to_le32((u32)0xffffff << 8)) | \
- cpu_to_le32(((val) & 0xffffff) << 8)
+#define netxen_set_tx_flags_opcode(_desc, _flags, _opcode) \
+ (_desc)->flags_opcode = \
+ cpu_to_le16(((_flags) & 0x7f) | (((_opcode) & 0x3f) << 7))
-#define netxen_get_cmd_desc_opcode(cmd_desc) \
- ((le16_to_cpu((cmd_desc)->flags_opcode) >> 7) & 0x003f)
-#define netxen_get_cmd_desc_totallength(cmd_desc) \
- ((le32_to_cpu((cmd_desc)->num_of_buffers_total_length) >> 8) & 0xffffff)
+#define netxen_set_tx_frags_len(_desc, _frags, _len) \
+ (_desc)->num_of_buffers_total_length = \
+ cpu_to_le32(((_frags) & 0xff) | (((_len) & 0xffffff) << 8))
struct cmd_desc_type0 {
u8 tcp_hdr_offset; /* For LSO only */
@@ -757,7 +746,7 @@
*/
struct netxen_skb_frag {
u64 dma;
- u32 length;
+ ulong length;
};
#define _netxen_set_bits(config_word, start, bits, val) {\
@@ -783,13 +772,7 @@
struct netxen_cmd_buffer {
struct sk_buff *skb;
struct netxen_skb_frag frag_array[MAX_BUFFERS_PER_CMD + 1];
- u32 total_length;
- u32 mss;
- u16 port;
- u8 cmd;
- u8 frag_count;
- unsigned long time_stamp;
- u32 state;
+ u32 frag_count;
};
/* In rx_buffer, we do not need multiple fragments as is a single buffer */
@@ -1486,8 +1469,6 @@
void netxen_initialize_adapter_ops(struct netxen_adapter *adapter);
int netxen_init_firmware(struct netxen_adapter *adapter);
-void netxen_tso_check(struct netxen_adapter *adapter,
- struct cmd_desc_type0 *desc, struct sk_buff *skb);
void netxen_nic_clear_stats(struct netxen_adapter *adapter);
void netxen_watchdog_task(struct work_struct *work);
void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx,
