| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2024 Amlogic, Inc. All rights reserved. |
| */ |
| |
| /dts-v1/; |
| |
| #include "amlogic-c3.dtsi" |
| |
| / { |
| model = "Amlogic C308l aw419 Development Board"; |
| compatible = "amlogic,aw419", "amlogic,c3"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| serial0 = &uart_b; |
| spi0 = &spifc; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x80000000>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| /* 9 MiB reserved for ARM Trusted Firmware */ |
| secmon_reserved: secmon@7f00000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x0 0x07f00000 0x0 0x900000>; |
| no-map; |
| }; |
| }; |
| |
| main_12v: regulator-main-12v { |
| compatible = "regulator-fixed"; |
| regulator-name = "12V"; |
| regulator-min-microvolt = <12000000>; |
| regulator-max-microvolt = <12000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vcc_5v: regulator-vcc-5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC5V"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| vin-supply = <&main_12v>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vddq: regulator-vddq { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDDQ"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| vin-supply = <&main_12v>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vddao_3v3: regulator-vddao-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDDAO3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&main_12v>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vddao_1v8: regulator-vddao-1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDDAO1V8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <&vddao_3v3>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ddr4_2v5: regulator-ddr4-2v5 { |
| compatible = "regulator-fixed"; |
| regulator-name = "DDR4_2V5"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| vin-supply = <&vddao_3v3>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vcc_3v3: regulator-vcc-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&vddao_3v3>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vcc_1v8: regulator-vcc-1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC1V8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <&vcc_3v3>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vdd_1v8: regulator-vdd-1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDD1V8_BOOT"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <&vcc_3v3>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vddio_b: regulator-vddio-3v3-b { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDDIO_B"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&vcc_3v3>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sdcard: regulator-sdcard { |
| compatible = "regulator-fixed"; |
| regulator-name = "SDCARD_POWER"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&vddao_3v3>; |
| gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| |
| &uart_b { |
| status = "okay"; |
| }; |
| |
| &nand { |
| status = "okay"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pinctrl-0 = <&nand_pins>; |
| pinctrl-names = "default"; |
| |
| nand@0 { |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| nand-on-flash-bbt; |
| |
| partition@0 { |
| label = "boot"; |
| reg = <0x0 0x00200000>; |
| }; |
| partition@200000 { |
| label = "env"; |
| reg = <0x00200000 0x00400000>; |
| }; |
| partition@600000 { |
| label = "system"; |
| reg = <0x00600000 0x00a00000>; |
| }; |
| partition@1000000 { |
| label = "rootfs"; |
| reg = <0x01000000 0x03000000>; |
| }; |
| partition@4000000 { |
| label = "media"; |
| reg = <0x04000000 0x8000000>; |
| }; |
| }; |
| }; |
| |
| ðmac { |
| status = "okay"; |
| phy-handle = <&internal_ephy>; |
| phy-mode = "rmii"; |
| }; |
| |
| &spifc { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pinctrl-0 = <&spifc_pins>; |
| pinctrl-names = "default"; |
| |
| nand@0 { |
| compatible = "spi-nand"; |
| reg = <0>; |
| spi-max-frequency = <83000000>; |
| spi-tx-bus-width = <4>; |
| spi-rx-bus-width = <4>; |
| status = "disabled"; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "boot"; |
| reg = <0 0x200000>; |
| }; |
| |
| partition@200000 { |
| label = "env"; |
| reg = <0x200000 0x400000>; |
| }; |
| |
| partition@600000 { |
| label = "system"; |
| reg = <0x600000 0xa00000>; |
| }; |
| |
| partition@1000000 { |
| label = "rootfs"; |
| reg = <0x1000000 0x3000000>; |
| }; |
| |
| partition@4000000 { |
| label = "data"; |
| reg = <0x4000000 0x8000000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &sd { |
| status = "okay"; |
| pinctrl-0 = <&sdcard_pins>; |
| pinctrl-1 = <&sdcard_clk_gate_pins>; |
| pinctrl-names = "default","clk-gate"; |
| |
| bus-width = <4>; |
| cap-sd-highspeed; |
| max-frequency = <50000000>; |
| disable-wp; |
| |
| cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; |
| vmmc-supply = <&sdcard>; |
| vqmmc-supply = <&sdcard>; |
| }; |