// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
 * Copyright 2024 NXP
 */

#include <dt-bindings/dma/fsl-edma.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>

#include "imx95-clock.h"
#include "imx95-pinfunc.h"
#include "imx95-power.h"

/ {
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		A55_0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			reg = <0x0>;
			enable-method = "psci";
			#cooling-cells = <2>;
			power-domains = <&scmi_perf IMX95_PERF_A55>;
			power-domain-names = "perf";
			i-cache-size = <32768>;
			i-cache-line-size = <64>;
			i-cache-sets = <128>;
			d-cache-size = <32768>;
			d-cache-line-size = <64>;
			d-cache-sets = <128>;
			next-level-cache = <&l2_cache_l0>;
		};

		A55_1: cpu@100 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			reg = <0x100>;
			enable-method = "psci";
			#cooling-cells = <2>;
			power-domains = <&scmi_perf IMX95_PERF_A55>;
			power-domain-names = "perf";
			i-cache-size = <32768>;
			i-cache-line-size = <64>;
			i-cache-sets = <128>;
			d-cache-size = <32768>;
			d-cache-line-size = <64>;
			d-cache-sets = <128>;
			next-level-cache = <&l2_cache_l1>;
		};

		A55_2: cpu@200 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			reg = <0x200>;
			enable-method = "psci";
			#cooling-cells = <2>;
			power-domains = <&scmi_perf IMX95_PERF_A55>;
			power-domain-names = "perf";
			i-cache-size = <32768>;
			i-cache-line-size = <64>;
			i-cache-sets = <128>;
			d-cache-size = <32768>;
			d-cache-line-size = <64>;
			d-cache-sets = <128>;
			next-level-cache = <&l2_cache_l2>;
		};

		A55_3: cpu@300 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			reg = <0x300>;
			enable-method = "psci";
			#cooling-cells = <2>;
			power-domains = <&scmi_perf IMX95_PERF_A55>;
			power-domain-names = "perf";
			i-cache-size = <32768>;
			i-cache-line-size = <64>;
			i-cache-sets = <128>;
			d-cache-size = <32768>;
			d-cache-line-size = <64>;
			d-cache-sets = <128>;
			next-level-cache = <&l2_cache_l3>;
		};

		A55_4: cpu@400 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			reg = <0x400>;
			power-domains = <&scmi_perf IMX95_PERF_A55>;
			power-domain-names = "perf";
			enable-method = "psci";
			#cooling-cells = <2>;
			i-cache-size = <32768>;
			i-cache-line-size = <64>;
			i-cache-sets = <128>;
			d-cache-size = <32768>;
			d-cache-line-size = <64>;
			d-cache-sets = <128>;
			next-level-cache = <&l2_cache_l4>;
		};

		A55_5: cpu@500 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			reg = <0x500>;
			power-domains = <&scmi_perf IMX95_PERF_A55>;
			power-domain-names = "perf";
			enable-method = "psci";
			#cooling-cells = <2>;
			i-cache-size = <32768>;
			i-cache-line-size = <64>;
			i-cache-sets = <128>;
			d-cache-size = <32768>;
			d-cache-line-size = <64>;
			d-cache-sets = <128>;
			next-level-cache = <&l2_cache_l5>;
		};

		l2_cache_l0: l2-cache-l0 {
			compatible = "cache";
			cache-size = <65536>;
			cache-line-size = <64>;
			cache-sets = <256>;
			cache-level = <2>;
			cache-unified;
			next-level-cache = <&l3_cache>;
		};

		l2_cache_l1: l2-cache-l1 {
			compatible = "cache";
			cache-size = <65536>;
			cache-line-size = <64>;
			cache-sets = <256>;
			cache-level = <2>;
			cache-unified;
			next-level-cache = <&l3_cache>;
		};

		l2_cache_l2: l2-cache-l2 {
			compatible = "cache";
			cache-size = <65536>;
			cache-line-size = <64>;
			cache-sets = <256>;
			cache-level = <2>;
			cache-unified;
			next-level-cache = <&l3_cache>;
		};

		l2_cache_l3: l2-cache-l3 {
			compatible = "cache";
			cache-size = <65536>;
			cache-line-size = <64>;
			cache-sets = <256>;
			cache-level = <2>;
			cache-unified;
			next-level-cache = <&l3_cache>;
		};

		l2_cache_l4: l2-cache-l4 {
			compatible = "cache";
			cache-size = <65536>;
			cache-line-size = <64>;
			cache-sets = <256>;
			cache-level = <2>;
			cache-unified;
			next-level-cache = <&l3_cache>;
		};

		l2_cache_l5: l2-cache-l5 {
			compatible = "cache";
			cache-size = <65536>;
			cache-line-size = <64>;
			cache-sets = <256>;
			cache-level = <2>;
			cache-unified;
			next-level-cache = <&l3_cache>;
		};

		l3_cache: l3-cache {
			compatible = "cache";
			cache-size = <524288>;
			cache-line-size = <64>;
			cache-sets = <512>;
			cache-level = <3>;
			cache-unified;
		};

		cpu-map {
			cluster0 {
				core0 {
					cpu = <&A55_0>;
				};

				core1 {
					cpu = <&A55_1>;
				};

				core2 {
					cpu = <&A55_2>;
				};

				core3 {
					cpu = <&A55_3>;
				};

				core4 {
					cpu = <&A55_4>;
				};

				core5 {
					cpu = <&A55_5>;
				};
			};
		};
	};

	dummy: clock-dummy {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <0>;
		clock-output-names = "dummy";
	};

	clk_ext1: clock-ext1 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <133000000>;
		clock-output-names = "clk_ext1";
	};

	sai1_mclk: clock-sai-mclk1 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency= <0>;
		clock-output-names = "sai1_mclk";
	};

	sai2_mclk: clock-sai-mclk2 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency= <0>;
		clock-output-names = "sai2_mclk";
	};

	sai3_mclk: clock-sai-mclk3 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency= <0>;
		clock-output-names = "sai3_mclk";
	};

	sai4_mclk: clock-sai-mclk4 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency= <0>;
		clock-output-names = "sai4_mclk";
	};

	sai5_mclk: clock-sai-mclk5 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency= <0>;
		clock-output-names = "sai5_mclk";
	};

	osc_24m: clock-24m {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <24000000>;
		clock-output-names = "osc_24m";
	};

	sram1: sram@204c0000 {
		compatible = "mmio-sram";
		reg = <0x0 0x204c0000 0x0 0x18000>;
		ranges = <0x0 0x0 0x204c0000 0x18000>;
		#address-cells = <1>;
		#size-cells = <1>;
	};

	firmware {
		scmi {
			compatible = "arm,scmi";
			mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>, <&mu2 5 1>;
			shmem = <&scmi_buf0>, <&scmi_buf1>;
			#address-cells = <1>;
			#size-cells = <0>;

			scmi_devpd: protocol@11 {
				reg = <0x11>;
				#power-domain-cells = <1>;
			};

			scmi_perf: protocol@13 {
				reg = <0x13>;
				#power-domain-cells = <1>;
			};

			scmi_clk: protocol@14 {
				reg = <0x14>;
				#clock-cells = <1>;
			};

			scmi_sensor: protocol@15 {
				reg = <0x15>;
				#thermal-sensor-cells = <1>;
			};

			scmi_iomuxc: protocol@19 {
				reg = <0x19>;
			};

		};
	};

	pmu {
		compatible = "arm,cortex-a55-pmu";
		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
	};

	thermal_zones: thermal-zones {
		a55-thermal {
			polling-delay-passive = <250>;
			polling-delay = <2000>;
			thermal-sensors = <&scmi_sensor 1>;

			trips {
				cpu_alert0: trip0 {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu_crit0: trip1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu_alert0>;
					cooling-device =
						<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						<&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						<&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						<&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						<&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
		clock-frequency = <24000000>;
		arm,no-tick-in-suspend;
		interrupt-parent = <&gic>;
	};

	gic: interrupt-controller@48000000 {
		compatible = "arm,gic-v3";
		reg = <0 0x48000000 0 0x10000>,
		      <0 0x48060000 0 0xc0000>;
		#address-cells = <2>;
		#size-cells = <2>;
		#interrupt-cells = <3>;
		interrupt-controller;
		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-parent = <&gic>;
		dma-noncoherent;
		ranges;

		its: msi-controller@48040000 {
			compatible = "arm,gic-v3-its";
			reg = <0 0x48040000 0 0x20000>;
			msi-controller;
			#msi-cells = <1>;
			dma-noncoherent;
		};
	};

	soc {
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		aips2: bus@42000000 {
			compatible = "fsl,aips-bus", "simple-bus";
			reg = <0x0 0x42000000 0x0 0x800000>;
			ranges = <0x42000000 0x0 0x42000000 0x8000000>,
				 <0x28000000 0x0 0x28000000 0x10000000>;
			#address-cells = <1>;
			#size-cells = <1>;

			edma2: dma-controller@42000000 {
				compatible = "fsl,imx95-edma5";
				reg = <0x42000000 0x210000>;
				#dma-cells = <3>;
				dma-channels = <64>;
				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				clock-names = "dma";
			};

			edma3: dma-controller@42210000 {
				compatible = "fsl,imx95-edma5";
				reg = <0x42210000 0x210000>;
				#dma-cells = <3>;
				dma-channels = <64>;
				interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				clock-names = "dma";
			};

			mu7: mailbox@42430000 {
				compatible = "fsl,imx95-mu";
				reg = <0x42430000 0x10000>;
				interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				#mbox-cells = <2>;
				status = "disabled";
			};

			wdog3: watchdog@42490000 {
				compatible = "fsl,imx93-wdt";
				reg = <0x42490000 0x10000>;
				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				timeout-sec = <40>;
				status = "disabled";
			};

			tpm3: pwm@424e0000 {
				compatible = "fsl,imx7ulp-pwm";
				reg = <0x424e0000 0x1000>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				#pwm-cells = <3>;
				status = "disabled";
			};

			tpm4: pwm@424f0000 {
				compatible = "fsl,imx7ulp-pwm";
				reg = <0x424f0000 0x1000>;
				clocks = <&scmi_clk IMX95_CLK_TPM4>;
				#pwm-cells = <3>;
				status = "disabled";
			};

			tpm5: pwm@42500000 {
				compatible = "fsl,imx7ulp-pwm";
				reg = <0x42500000 0x1000>;
				clocks = <&scmi_clk IMX95_CLK_TPM5>;
				#pwm-cells = <3>;
				status = "disabled";
			};

			tpm6: pwm@42510000 {
				compatible = "fsl,imx7ulp-pwm";
				reg = <0x42510000 0x1000>;
				clocks = <&scmi_clk IMX95_CLK_TPM6>;
				#pwm-cells = <3>;
				status = "disabled";
			};

			lpi2c3: i2c@42530000 {
				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
				reg = <0x42530000 0x10000>;
				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPI2C3>,
					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				clock-names = "per", "ipg";
				#address-cells = <1>;
				#size-cells = <0>;
				dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			lpi2c4: i2c@42540000 {
				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
				reg = <0x42540000 0x10000>;
				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPI2C4>,
					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				clock-names = "per", "ipg";
				#address-cells = <1>;
				#size-cells = <0>;
				dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			lpspi3: spi@42550000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
				reg = <0x42550000 0x10000>;
				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPSPI3>,
					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				clock-names = "per", "ipg";
				dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			lpspi4: spi@42560000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
				reg = <0x42560000 0x10000>;
				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPSPI4>,
					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				clock-names = "per", "ipg";
				dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			lpuart3: serial@42570000 {
				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
					     "fsl,imx7ulp-lpuart";
				reg = <0x42570000 0x1000>;
				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPUART3>;
				clock-names = "ipg";
				dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
				dma-names = "rx", "tx";
				status = "disabled";
			};

			lpuart4: serial@42580000 {
				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
					     "fsl,imx7ulp-lpuart";
				reg = <0x42580000 0x1000>;
				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPUART4>;
				clock-names = "ipg";
				dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
				dma-names = "rx", "tx";
				status = "disabled";
			};

			lpuart5: serial@42590000 {
				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
					     "fsl,imx7ulp-lpuart";
				reg = <0x42590000 0x1000>;
				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPUART5>;
				clock-names = "ipg";
				dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
				dma-names = "rx", "tx";
				status = "disabled";
			};

			lpuart6: serial@425a0000 {
				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
					     "fsl,imx7ulp-lpuart";
				reg = <0x425a0000 0x1000>;
				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPUART6>;
				clock-names = "ipg";
				dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
				dma-names = "rx", "tx";
				status = "disabled";
			};

			flexcan2: can@425b0000 {
				compatible = "fsl,imx95-flexcan";
				reg = <0x425b0000 0x10000>;
				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
					 <&scmi_clk IMX95_CLK_CAN2>;
				clock-names = "ipg", "per";
				assigned-clocks = <&scmi_clk IMX95_CLK_CAN2>;
				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
				assigned-clock-rates = <40000000>;
				fsl,clk-source = /bits/ 8 <0>;
				status = "disabled";
			};

			flexcan3: can@42600000 {
				compatible = "fsl,imx95-flexcan";
				reg = <0x42600000 0x10000>;
				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
					 <&scmi_clk IMX95_CLK_CAN3>;
				clock-names = "ipg", "per";
				assigned-clocks = <&scmi_clk IMX95_CLK_CAN3>;
				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
				assigned-clock-rates = <40000000>;
				fsl,clk-source = /bits/ 8 <0>;
				status = "disabled";
			};

			flexspi1: spi@425e0000 {
				compatible = "nxp,imx8mm-fspi";
				reg = <0x425e0000 0x10000>, <0x28000000 0x8000000>;
				reg-names = "fspi_base", "fspi_mmap";
				#address-cells = <1>;
				#size-cells = <0>;
				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_FLEXSPI1>,
					 <&scmi_clk IMX95_CLK_FLEXSPI1>;
				clock-names = "fspi_en", "fspi";
				assigned-clocks = <&scmi_clk IMX95_CLK_FLEXSPI1>;
				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
				assigned-clock-rates = <200000000>;
				status = "disabled";
			};

			sai3: sai@42650000 {
				compatible = "fsl,imx95-sai";
				reg = <0x42650000 0x10000>;
				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
					 <&scmi_clk IMX95_CLK_SAI3>, <&dummy>,
					 <&dummy>;
				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
				dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
				dma-names = "rx", "tx";
				status = "disabled";
			};

			sai4: sai@42660000 {
				compatible = "fsl,imx95-sai";
				reg = <0x42660000 0x10000>;
				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
					 <&scmi_clk IMX95_CLK_SAI4>, <&dummy>,
					 <&dummy>;
				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
				dmas = <&edma2 68 0 FSL_EDMA_RX>, <&edma2 67 0 0>;
				dma-names = "rx", "tx";
				status = "disabled";
			};

			sai5: sai@42670000 {
				compatible = "fsl,imx95-sai";
				reg = <0x42670000 0x10000>;
				interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
					 <&scmi_clk IMX95_CLK_SAI5>, <&dummy>,
					 <&dummy>;
				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
				dmas = <&edma2 70 0 FSL_EDMA_RX>, <&edma2 69 0 0>;
				dma-names = "rx", "tx";
				status = "disabled";
			};

			xcvr: xcvr@42680000 {
				compatible = "fsl,imx95-xcvr";
				reg = <0x42680000 0x800>, <0x42680800 0x400>,
				      <0x42680c00 0x080>, <0x42680e00 0x080>;
				reg-names = "ram", "regs", "rxfifo", "txfifo";
				interrupts = /* XCVR IRQ 0 */
					     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
					     /* XCVR IRQ 1 */
					     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
					 <&scmi_clk IMX95_CLK_SPDIF>,
					 <&dummy>,
					 <&scmi_clk IMX95_CLK_AUDIOXCVR>;
				clock-names = "ipg", "phy", "spba", "pll_ipg";
				dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
				dma-names = "rx", "tx";
				status = "disabled";
			};

			lpuart7: serial@42690000 {
				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
					     "fsl,imx7ulp-lpuart";
				reg = <0x42690000 0x1000>;
				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPUART7>;
				clock-names = "ipg";
				dmas = <&edma2 26 0 FSL_EDMA_RX>, <&edma2 25 0 0>;
				dma-names = "rx", "tx";
				status = "disabled";
			};

			lpuart8: serial@426a0000 {
				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
					     "fsl,imx7ulp-lpuart";
				reg = <0x426a0000 0x1000>;
				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPUART8>;
				clock-names = "ipg";
				dmas = <&edma2 28 0 FSL_EDMA_RX>, <&edma2 27 0 0>;
				dma-names = "rx", "tx";
				status = "disabled";
			};

			lpi2c5: i2c@426b0000 {
				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
				reg = <0x426b0000 0x10000>;
				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPI2C5>,
					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				clock-names = "per", "ipg";
				#address-cells = <1>;
				#size-cells = <0>;
				dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			lpi2c6: i2c@426c0000 {
				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
				reg = <0x426c0000 0x10000>;
				interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPI2C6>,
					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				clock-names = "per", "ipg";
				#address-cells = <1>;
				#size-cells = <0>;
				dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			lpi2c7: i2c@426d0000 {
				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
				reg = <0x426d0000 0x10000>;
				interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPI2C7>,
					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				clock-names = "per", "ipg";
				#address-cells = <1>;
				#size-cells = <0>;
				dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			lpi2c8: i2c@426e0000 {
				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
				reg = <0x426e0000 0x10000>;
				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPI2C8>,
					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				clock-names = "per", "ipg";
				#address-cells = <1>;
				#size-cells = <0>;
				dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			lpspi5: spi@426f0000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
				reg = <0x426f0000 0x10000>;
				interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPSPI5>,
					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				clock-names = "per", "ipg";
				dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			lpspi6: spi@42700000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
				reg = <0x42700000 0x10000>;
				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPSPI6>,
					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				clock-names = "per", "ipg";
				dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			lpspi7: spi@42710000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
				reg = <0x42710000 0x10000>;
				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPSPI7>,
					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				clock-names = "per", "ipg";
				dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			lpspi8: spi@42720000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
				reg = <0x42720000 0x10000>;
				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPSPI8>,
					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				clock-names = "per", "ipg";
				dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			mu8: mailbox@42730000 {
				compatible = "fsl,imx95-mu";
				reg = <0x42730000 0x10000>;
				interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
				#mbox-cells = <2>;
				status = "disabled";
			};

			flexcan4: can@427c0000 {
				compatible = "fsl,imx95-flexcan";
				reg = <0x427c0000 0x10000>;
				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
					 <&scmi_clk IMX95_CLK_CAN4>;
				clock-names = "ipg", "per";
				assigned-clocks = <&scmi_clk IMX95_CLK_CAN4>;
				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
				assigned-clock-rates = <40000000>;
				fsl,clk-source = /bits/ 8 <0>;
				status = "disabled";
			};

			flexcan5: can@427d0000 {
				compatible = "fsl,imx95-flexcan";
				reg = <0x427d0000 0x10000>;
				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
					 <&scmi_clk IMX95_CLK_CAN5>;
				clock-names = "ipg", "per";
				assigned-clocks = <&scmi_clk IMX95_CLK_CAN5>;
				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
				assigned-clock-rates = <40000000>;
				fsl,clk-source = /bits/ 8 <0>;
				status = "disabled";
			};
		};

		aips3: bus@42800000 {
			compatible = "fsl,aips-bus", "simple-bus";
			reg = <0 0x42800000 0 0x800000>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x42800000 0x0 0x42800000 0x800000>;

			usdhc1: mmc@42850000 {
				compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc";
				reg = <0x42850000 0x10000>;
				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
					 <&scmi_clk IMX95_CLK_WAKEUPAXI>,
					 <&scmi_clk IMX95_CLK_USDHC1>;
				clock-names = "ipg", "ahb", "per";
				assigned-clocks = <&scmi_clk IMX95_CLK_USDHC1>;
				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
				assigned-clock-rates = <400000000>;
				bus-width = <8>;
				fsl,tuning-start-tap = <1>;
				fsl,tuning-step= <2>;
				status = "disabled";
			};

			usdhc2: mmc@42860000 {
				compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc";
				reg = <0x42860000 0x10000>;
				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
					 <&scmi_clk IMX95_CLK_WAKEUPAXI>,
					 <&scmi_clk IMX95_CLK_USDHC2>;
				clock-names = "ipg", "ahb", "per";
				assigned-clocks = <&scmi_clk IMX95_CLK_USDHC2>;
				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
				assigned-clock-rates = <400000000>;
				bus-width = <4>;
				fsl,tuning-start-tap = <1>;
				fsl,tuning-step= <2>;
				status = "disabled";
			};

			usdhc3: mmc@428b0000 {
				compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc";
				reg = <0x428b0000 0x10000>;
				interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
					 <&scmi_clk IMX95_CLK_WAKEUPAXI>,
					 <&scmi_clk IMX95_CLK_USDHC3>;
				clock-names = "ipg", "ahb", "per";
				assigned-clocks = <&scmi_clk IMX95_CLK_USDHC3>;
				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
				assigned-clock-rates = <400000000>;
				bus-width = <4>;
				fsl,tuning-start-tap = <1>;
				fsl,tuning-step= <2>;
				status = "disabled";
			};
		};

		gpio2: gpio@43810000 {
			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
			reg = <0x0 0x43810000 0x0 0x1000>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
			clock-names = "gpio", "port";
			gpio-ranges = <&scmi_iomuxc 0 4 32>;
		};

		gpio3: gpio@43820000 {
			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
			reg = <0x0 0x43820000 0x0 0x1000>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
			clock-names = "gpio", "port";
			gpio-ranges = <&scmi_iomuxc 0 104 8>, <&scmi_iomuxc 8 74 18>,
				      <&scmi_iomuxc 26 42 2>, <&scmi_iomuxc 28 0 4>;
		};

		gpio4: gpio@43840000 {
			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
			reg = <0x0 0x43840000 0x0 0x1000>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
			clock-names = "gpio", "port";
			gpio-ranges = <&scmi_iomuxc 0 46 28>, <&scmi_iomuxc 28 44 2>;
		};

		gpio5: gpio@43850000 {
			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
			reg = <0x0 0x43850000 0x0 0x1000>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
			clock-names = "gpio", "port";
			gpio-ranges = <&scmi_iomuxc 0 92 12>, <&scmi_iomuxc 12 36 6>;
		};

		aips1: bus@44000000 {
			compatible = "fsl,aips-bus", "simple-bus";
			reg = <0x0 0x44000000 0x0 0x800000>;
			ranges = <0x44000000 0x0 0x44000000 0x800000>;
			#address-cells = <1>;
			#size-cells = <1>;

			edma1: dma-controller@44000000 {
				compatible = "fsl,imx93-edma3";
				reg = <0x44000000 0x200000>;
				#dma-cells = <3>;
				dma-channels = <31>;
				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
				clock-names = "dma";
			};

			mu1: mailbox@44220000 {
				compatible = "fsl,imx95-mu";
				reg = <0x44220000 0x10000>;
				interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
				#mbox-cells = <2>;
				status = "disabled";
			};

			tpm1: pwm@44310000 {
				compatible = "fsl,imx7ulp-pwm";
				reg = <0x44310000 0x1000>;
				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
				#pwm-cells = <3>;
				status = "disabled";
			};

			tpm2: pwm@44320000 {
				compatible = "fsl,imx7ulp-pwm";
				reg = <0x44320000 0x1000>;
				clocks = <&scmi_clk IMX95_CLK_TPM2>;
				#pwm-cells = <3>;
				status = "disabled";
			};

			lpi2c1: i2c@44340000 {
				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
				reg = <0x44340000 0x10000>;
				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPI2C1>,
					 <&scmi_clk IMX95_CLK_BUSAON>;
				clock-names = "per", "ipg";
				#address-cells = <1>;
				#size-cells = <0>;
				dmas = <&edma1 12 0 0>, <&edma1 13 0 FSL_EDMA_RX> ;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			lpi2c2: i2c@44350000 {
				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
				reg = <0x44350000 0x10000>;
				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPI2C2>,
					 <&scmi_clk IMX95_CLK_BUSAON>;
				clock-names = "per", "ipg";
				#address-cells = <1>;
				#size-cells = <0>;
				dmas = <&edma1 14 0 0>, <&edma1 15 0 FSL_EDMA_RX> ;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			lpspi1: spi@44360000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
				reg = <0x44360000 0x10000>;
				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPSPI1>,
					 <&scmi_clk IMX95_CLK_BUSAON>;
				clock-names = "per", "ipg";
				dmas = <&edma1 16 0 FSL_EDMA_RX>, <&edma1 17 0 0> ;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			lpspi2: spi@44370000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
				reg = <0x44370000 0x10000>;
				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPSPI2>,
					 <&scmi_clk IMX95_CLK_BUSAON>;
				clock-names = "per", "ipg";
				dmas = <&edma1 18 0 FSL_EDMA_RX>, <&edma1 19 0 0> ;
				dma-names = "tx", "rx";
				status = "disabled";
			};

			lpuart1: serial@44380000 {
				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
					     "fsl,imx7ulp-lpuart";
				reg = <0x44380000 0x1000>;
				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPUART1>;
				clock-names = "ipg";
				dmas = <&edma1 21 0 FSL_EDMA_RX>, <&edma1 20 0 0>;
				dma-names = "rx", "tx";
				status = "disabled";
			};

			lpuart2: serial@44390000 {
				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
					     "fsl,imx7ulp-lpuart";
				reg = <0x44390000 0x1000>;
				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_LPUART2>;
				clock-names = "ipg";
				dmas = <&edma1 23 0 FSL_EDMA_RX>, <&edma1 22 0 0>;
				dma-names = "rx", "tx";
				status = "disabled";
			};

			flexcan1: can@443a0000 {
				compatible = "fsl,imx95-flexcan";
				reg = <0x443a0000 0x10000>;
				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSAON>,
					 <&scmi_clk IMX95_CLK_CAN1>;
				clock-names = "ipg", "per";
				assigned-clocks = <&scmi_clk IMX95_CLK_CAN1>;
				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
				assigned-clock-rates = <40000000>;
				fsl,clk-source = /bits/ 8 <0>;
				status = "disabled";
			};

			sai1: sai@443b0000 {
				compatible = "fsl,imx95-sai";
				reg = <0x443b0000 0x10000>;
				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSAON>, <&dummy>,
					 <&scmi_clk IMX95_CLK_SAI1>, <&dummy>,
					 <&dummy>;
				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
				dmas = <&edma1 25 0 FSL_EDMA_RX>, <&edma1 24 0 0>;
				dma-names = "rx", "tx";
				status = "disabled";
			};

			micfil: micfil@44520000 {
				compatible = "fsl,imx95-micfil", "fsl,imx93-micfil";
				reg = <0x44520000 0x10000>;
				interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSAON>,
					 <&scmi_clk IMX95_CLK_PDM>,
					 <&scmi_clk IMX95_CLK_AUDIOPLL1>,
					 <&scmi_clk IMX95_CLK_AUDIOPLL2>,
					 <&dummy>;
				clock-names = "ipg_clk", "ipg_clk_app",
					      "pll8k", "pll11k", "clkext3";
				dmas = <&edma1 6 0 5>;
				dma-names = "rx";
				status = "disabled";
			};

			adc1: adc@44530000 {
				compatible = "nxp,imx93-adc";
				reg = <0x44530000 0x10000>;
				interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_ADC>;
				clock-names = "ipg";
				status = "disabled";
			};

			mu2: mailbox@445b0000 {
				compatible = "fsl,imx95-mu";
				reg = <0x445b0000 0x1000>;
				ranges;
				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <1>;
				#mbox-cells = <2>;

				sram0: sram@445b1000 {
					compatible = "mmio-sram";
					reg = <0x445b1000 0x400>;
					ranges = <0x0 0x445b1000 0x400>;
					#address-cells = <1>;
					#size-cells = <1>;

					scmi_buf0: scmi-sram-section@0 {
						compatible = "arm,scmi-shmem";
						reg = <0x0 0x80>;
					};

					scmi_buf1: scmi-sram-section@80 {
						compatible = "arm,scmi-shmem";
						reg = <0x80 0x80>;
					};
				};

			};

			mu3: mailbox@445d0000 {
				compatible = "fsl,imx95-mu";
				reg = <0x445d0000 0x10000>;
				interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
				#mbox-cells = <2>;
				status = "disabled";
			};

			mu4: mailbox@445f0000 {
				compatible = "fsl,imx95-mu";
				reg = <0x445f0000 0x10000>;
				interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
				#mbox-cells = <2>;
				status = "disabled";
			};

			mu6: mailbox@44630000 {
				compatible = "fsl,imx95-mu";
				reg = <0x44630000 0x10000>;
				interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
				#mbox-cells = <2>;
				status = "disabled";
			};
		};

		mailbox@47320000 {
			compatible = "fsl,imx95-mu-v2x";
			reg = <0x0 0x47320000 0x0 0x10000>;
			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
			#mbox-cells = <2>;
		};

		mailbox@47350000 {
			compatible = "fsl,imx95-mu-v2x";
			reg = <0x0 0x47350000 0x0 0x10000>;
			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
			#mbox-cells = <2>;
		};

		/* GPIO1 is under exclusive control of System Manager */
		gpio1: gpio@47400000 {
			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
			reg = <0x0 0x47400000 0x0 0x1000>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-controller;
			#interrupt-cells = <2>;
			clocks = <&scmi_clk IMX95_CLK_M33>,
				 <&scmi_clk IMX95_CLK_M33>;
			clock-names = "gpio", "port";
			gpio-ranges = <&scmi_iomuxc 0 112 16>;
			status = "disabled";
		};

		elemu0: mailbox@47520000 {
			compatible = "fsl,imx95-mu-ele";
			reg = <0x0 0x47520000 0x0 0x10000>;
			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
			#mbox-cells = <2>;
			status = "disabled";
		};

		elemu1: mailbox@47530000 {
			compatible = "fsl,imx95-mu-ele";
			reg = <0x0 0x47530000 0x0 0x10000>;
			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
			#mbox-cells = <2>;
			status = "disabled";
		};

		elemu2: mailbox@47540000 {
			compatible = "fsl,imx95-mu-ele";
			reg = <0x0 0x47540000 0x0 0x10000>;
			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
			#mbox-cells = <2>;
			status = "disabled";
		};

		elemu3: mailbox@47550000 {
			compatible = "fsl,imx95-mu-ele";
			reg = <0x0 0x47550000 0x0 0x10000>;
			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
			#mbox-cells = <2>;
		};

		elemu4: mailbox@47560000 {
			compatible = "fsl,imx95-mu-ele";
			reg = <0x0 0x47560000 0x0 0x10000>;
			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
			#mbox-cells = <2>;
			status = "disabled";
		};

		elemu5: mailbox@47570000 {
			compatible = "fsl,imx95-mu-ele";
			reg = <0x0 0x47570000 0x0 0x10000>;
			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
			#mbox-cells = <2>;
			status = "disabled";
		};

		aips4: bus@49000000 {
			compatible = "fsl,aips-bus", "simple-bus";
			reg = <0x0 0x49000000 0x0 0x800000>;
			ranges = <0x49000000 0x0 0x49000000 0x800000>;
			#address-cells = <1>;
			#size-cells = <1>;

			smmu: iommu@490d0000 {
				compatible = "arm,smmu-v3";
				reg = <0x490d0000 0x100000>;
				interrupts = <GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
					     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
					     <GIC_SPI 334 IRQ_TYPE_EDGE_RISING>,
					     <GIC_SPI 326 IRQ_TYPE_EDGE_RISING>;
				interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
				#iommu-cells = <1>;
				status = "disabled";
			};
		};

		pcie0: pcie@4c300000 {
			compatible = "fsl,imx95-pcie";
			reg = <0 0x4c300000 0 0x10000>,
			      <0 0x60100000 0 0xfe00000>,
			      <0 0x4c360000 0 0x10000>,
			      <0 0x4c340000 0 0x2000>;
			reg-names = "dbi", "config", "atu", "app";
			ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
				 <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x10000000>;
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			linux,pci-domain = <0>;
			bus-range = <0x00 0xff>;
			num-lanes = <1>;
			num-viewport = <8>;
			interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "msi";
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 0x7>;
			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 2 &gic 0 0 GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 3 &gic 0 0 GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 4 &gic 0 0 GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&scmi_clk IMX95_CLK_HSIO>,
				 <&scmi_clk IMX95_CLK_HSIOPLL>,
				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
					 <&scmi_clk IMX95_CLK_HSIOPLL>,
					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
			assigned-clock-parents = <0>, <0>,
						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
			fsl,max-link-speed = <3>;
			status = "disabled";
		};

		pcie0_ep: pcie-ep@4c300000 {
			compatible = "fsl,imx95-pcie-ep";
			reg = <0 0x4c300000 0 0x10000>,
			      <0 0x4c360000 0 0x1000>,
			      <0 0x4c320000 0 0x1000>,
			      <0 0x4c340000 0 0x2000>,
			      <0 0x4c370000 0 0x10000>,
			      <0x9 0 1 0>;
			reg-names = "dbi","atu", "dbi2", "app", "dma", "addr_space";
			num-lanes = <1>;
			interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "dma";
			clocks = <&scmi_clk IMX95_CLK_HSIO>,
				 <&scmi_clk IMX95_CLK_HSIOPLL>,
				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
					 <&scmi_clk IMX95_CLK_HSIOPLL>,
					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
			assigned-clock-parents = <0>, <0>,
						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
			status = "disabled";
		};

		pcie1: pcie@4c380000 {
			compatible = "fsl,imx95-pcie";
			reg = <0 0x4c380000 0 0x10000>,
			      <8 0x80100000 0 0xfe00000>,
			      <0 0x4c3e0000 0 0x10000>,
			      <0 0x4c3c0000 0 0x2000>;
			reg-names = "dbi", "config", "atu", "app";
			ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>,
				 <0x82000000 0 0x10000000 0xa 0x10000000 0 0x10000000>;
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			linux,pci-domain = <1>;
			bus-range = <0x00 0xff>;
			num-lanes = <1>;
			num-viewport = <8>;
			interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "msi";
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 0x7>;
			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 2 &gic 0 0 GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 3 &gic 0 0 GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 4 &gic 0 0 GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&scmi_clk IMX95_CLK_HSIO>,
				 <&scmi_clk IMX95_CLK_HSIOPLL>,
				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
					 <&scmi_clk IMX95_CLK_HSIOPLL>,
					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
			assigned-clock-parents = <0>, <0>,
						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
			fsl,max-link-speed = <3>;
			status = "disabled";
		};

		pcie1_ep: pcie-ep@4c380000 {
			compatible = "fsl,imx95-pcie-ep";
			reg = <0 0x4c380000 0 0x10000>,
			      <0 0x4c3e0000 0 0x1000>,
			      <0 0x4c3a0000 0 0x1000>,
			      <0 0x4c3c0000 0 0x2000>,
			      <0 0x4c3f0000 0 0x10000>,
			      <0xa 0 1 0>;
			reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
			num-lanes = <1>;
			interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "dma";
			clocks = <&scmi_clk IMX95_CLK_HSIO>,
				 <&scmi_clk IMX95_CLK_HSIOPLL>,
				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
					 <&scmi_clk IMX95_CLK_HSIOPLL>,
					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
			assigned-clock-parents = <0>, <0>,
						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
			status = "disabled";
		};

		netcmix_blk_ctrl: syscon@4c810000 {
			compatible = "nxp,imx95-netcmix-blk-ctrl", "syscon";
			reg = <0x0 0x4c810000 0x0 0x10000>;
			#clock-cells = <1>;
			clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>;
			assigned-clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>;
			assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
			assigned-clock-rates = <133333333>;
			power-domains = <&scmi_devpd IMX95_PD_NETC>;
			status = "disabled";
		};

		sai2: sai@4c880000 {
			compatible = "fsl,imx95-sai";
			reg = <0x0 0x4c880000 0x0 0x10000>;
			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>, <&dummy>,
				 <&scmi_clk IMX95_CLK_SAI2>, <&dummy>,
				 <&dummy>;
			clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
			power-domains = <&scmi_devpd IMX95_PD_NETC>;
			dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
			dma-names = "rx", "tx";
			status = "disabled";
		};

		ddr-pmu@4e090dc0 {
			compatible = "fsl,imx95-ddr-pmu", "fsl,imx93-ddr-pmu";
			reg = <0x0 0x4e090dc0 0x0 0x200>;
			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
		};
	};
};