// SPDX-License-Identifier: GPL-2.0

#include "tegra234.dtsi"

/ {
	compatible = "nvidia,p3701", "nvidia,tegra234";

	aliases {
		mmc0 = "/bus@0/mmc@3460000";
		mmc1 = "/bus@0/mmc@3400000";
	};

	bus@0 {
		aconnect@2900000 {
			status = "okay";

			ahub@2900800 {
				status = "okay";

				i2s@2901000 {
					status = "okay";
				};

				i2s@2901100 {
					status = "okay";
				};

				i2s@2901300 {
					status = "okay";
				};

				i2s@2901500 {
					status = "okay";
				};

				dmic@2904200 {
					status = "okay";
				};
			};

			dma-controller@2930000 {
				status = "okay";
			};

			interrupt-controller@2a40000 {
				status = "okay";
			};
		};

		i2c@3160000 {
			status = "okay";

			eeprom@50 {
				compatible = "atmel,24c02";
				reg = <0x50>;

				label = "module";
				vcc-supply = <&vdd_1v8_hs>;
				address-width = <8>;
				pagesize = <8>;
				size = <256>;
				read-only;
			};
		};

		spi@3270000 {
			status = "okay";

			flash@0 {
				compatible = "jedec,spi-nor";
				reg = <0>;
				spi-max-frequency = <102000000>;
				spi-tx-bus-width = <4>;
				spi-rx-bus-width = <4>;
			};
		};

		mmc@3460000 {
			status = "okay";
			bus-width = <8>;
			non-removable;
		};

		padctl@3520000 {
			vclamp-usb-supply = <&vdd_1v8_ao>;
			avdd-usb-supply = <&vdd_3v3_ao>;

			ports {
				usb2-0 {
					vbus-supply = <&vdd_5v0_sys>;
				};

				usb2-1 {
					vbus-supply = <&vdd_5v0_sys>;
				};

				usb2-2 {
					vbus-supply = <&vdd_5v0_sys>;
				};

				usb2-3 {
					vbus-supply = <&vdd_5v0_sys>;
				};
			};
		};

		i2c@c240000 {
			status = "okay";

			power-sensor@40 {
				compatible = "ti,ina3221";
				reg = <0x40>;
				#address-cells = <1>;
				#size-cells = <0>;

				input@0 {
					reg = <0x0>;
					label = "VDD_GPU_SOC";
					shunt-resistor-micro-ohms = <2000>;
				};

				input@1 {
					reg = <0x1>;
					label = "VDD_CPU_CV";
					shunt-resistor-micro-ohms = <2000>;
				};

				input@2 {
					reg = <0x2>;
					label = "VIN_SYS_5V0";
					shunt-resistor-micro-ohms = <2000>;
					ti,summation-disable;
				};
			};

			power-sensor@41 {
				compatible = "ti,ina3221";
				reg = <0x41>;
				#address-cells = <1>;
				#size-cells = <0>;

				input@0 {
					reg = <0x0>;
					status = "disabled";
				};

				input@1 {
					reg = <0x1>;
					label = "VDDQ_VDD2_1V8AO";
					shunt-resistor-micro-ohms = <2000>;
				};

				input@2 {
					reg = <0x2>;
					status = "disabled";
				};
			};
		};

		rtc@c2a0000 {
			status = "okay";
		};

		pmc@c360000 {
			nvidia,invert-interrupt;
		};
	};

	bpmp {
		i2c {
			status = "okay";

			thermal-sensor@4c {
				compatible = "ti,tmp451";
				status = "okay";
				reg = <0x4c>;
				vcc-supply = <&vdd_1v8_ao>;
			};
		};

		thermal {
			status = "okay";
		};
	};

	vdd_1v8_ao: regulator-vdd-1v8-ao {
		compatible = "regulator-fixed";
		regulator-name = "VDD_1V8_AO";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-always-on;
	};

	vdd_1v8_hs: regulator-vdd-1v8-hs {
		compatible = "regulator-fixed";
		regulator-name = "VDD_1V8_HS";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-always-on;
	};

	vdd_1v8_ls: regulator-vdd-1v8-ls {
		compatible = "regulator-fixed";
		regulator-name = "VDD_1V8_LS";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-always-on;
	};

	vdd_3v3_ao: regulator-vdd-3v3-ao {
		compatible = "regulator-fixed";
		regulator-name = "VDD_3V3_AO";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
	};

	vdd_5v0_sys: regulator-vdd-5v0-sys {
		compatible = "regulator-fixed";
		regulator-name = "VIN_SYS_5V0";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
		regulator-boot-on;
	};
};