// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
 * Device Tree Source for the RZ/G2UL Type-1 SMARC EVK parts
 *
 * Copyright (C) 2022 Renesas Electronics Corp.
 */

#include <dt-bindings/gpio/gpio.h>
#include "rzg2ul-smarc-pinfunction.dtsi"
#include "rz-smarc-common.dtsi"

#if (!SW_ET0_EN_N)
&canfd {
	/delete-property/ pinctrl-0;
	/delete-property/ pinctrl-names;
	status = "disabled";
};
#endif

&cpu_dai {
	sound-dai = <&ssi1>;
};

&i2c0 {
	clock-frequency = <400000>;

	da9062: pmic@58 {
		compatible = "dlg,da9062";
		reg = <0x58>;
		gpio-controller;
		#gpio-cells = <2>;

		gpio {
			compatible = "dlg,da9062-gpio";
		};

		onkey {
			compatible = "dlg,da9062-onkey";
		};

		pmic-good-hog {
			gpio-hog;
			gpios = <4 GPIO_ACTIVE_HIGH>;
			output-high;
			line-name = "PMIC_PGOOD";
		};

		rtc {
			compatible = "dlg,da9062-rtc";
		};

		sd0-pwr-sel-hog {
			gpio-hog;
			gpios = <1 GPIO_ACTIVE_HIGH>;
			input;
			line-name = "SD0_PWR_SEL";
		};

		sd1-pwr-sel-hog {
			gpio-hog;
			gpios = <2 GPIO_ACTIVE_HIGH>;
			input;
			line-name = "SD1_PWR_SEL";
		};

		sw-et0-en-hog {
			gpio-hog;
			gpios = <3 GPIO_ACTIVE_HIGH>;
			input;
			line-name = "SW_ET0_EN#";
		};

		thermal {
			compatible = "dlg,da9062-thermal";
			status = "disabled";
		};

		watchdog {
			compatible = "dlg,da9062-watchdog";
			status = "disabled";
		};
	};

	versa3: clock-generator@68 {
		compatible = "renesas,5p35023";
		reg = <0x68>;
		#clock-cells = <1>;
		clocks = <&x1>;

		renesas,settings = [
			80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf
			00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6
			80 b0 45 c4 95
		];

		assigned-clocks = <&versa3 0>, <&versa3 1>,
				  <&versa3 2>, <&versa3 3>,
				  <&versa3 4>, <&versa3 5>;
		assigned-clock-rates = <24000000>, <11289600>,
				       <11289600>, <12000000>,
				       <25000000>, <12288000>;
	};
};

&i2c1 {
	wm8978: codec@1a {
		compatible = "wlf,wm8978";
		#sound-dai-cells = <0>;
		reg = <0x1a>;
	};
};

#if PMOD_MTU3
&mtu3 {
	pinctrl-0 = <&mtu3_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&spi1 {
	status = "disabled";
};
#endif

#if (SW_ET0_EN_N)
&ssi1 {
	pinctrl-0 = <&ssi1_pins>;
	pinctrl-names = "default";

	status = "okay";
};
#else
&snd_rzg2l {
	status = "disabled";
};

&spi1 {
	/delete-property/ pinctrl-0;
	/delete-property/ pinctrl-names;
	status = "disabled";
};

&ssi1 {
	/delete-property/ pinctrl-0;
	/delete-property/ pinctrl-names;
	status = "disabled";
};
#endif

&vccq_sdhi1 {
	gpios = <&pinctrl RZG2L_GPIO(6, 1) GPIO_ACTIVE_HIGH>;
};