// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3566.dtsi"

/ {
	model = "Powkiddy x55";
	chassis-type = "handset";
	compatible = "powkiddy,x55", "rockchip,rk3566";

	aliases {
		mmc0 = &sdhci;
		mmc1 = &sdmmc0;
		mmc2 = &sdmmc2;
		mmc3 = &sdmmc1;
	};

	chosen: chosen {
		stdout-path = "serial2:1500000n8";
	};

	adc_joystick: adc-joystick {
		compatible = "adc-joystick";
		io-channels = <&saradc 0>, <&saradc 1>,
			      <&saradc 2>, <&saradc 3>;
		poll-interval = <60>;
		#address-cells = <1>;
		#size-cells = <0>;

		axis@0 {
			reg = <0>;
			abs-flat = <30>;
			abs-fuzz = <20>;
			abs-range = <15 1023>;
			linux,code = <ABS_X>;
		};

		axis@1 {
			reg = <1>;
			abs-flat = <30>;
			abs-fuzz = <20>;
			abs-range = <1023 15>;
			linux,code = <ABS_Y>;
		};

		axis@2 {
			reg = <2>;
			abs-flat = <30>;
			abs-fuzz = <20>;
			abs-range = <15 1023>;
			linux,code = <ABS_RX>;
		};

		axis@3 {
			reg = <3>;
			abs-flat = <30>;
			abs-fuzz = <20>;
			abs-range = <1023 15>;
			linux,code = <ABS_RY>;
		};
	};

	backlight: backlight {
		compatible = "pwm-backlight";
		power-supply = <&vcc_sys>;
		pwms = <&pwm4 0 25000 0>;
	};

	battery: battery {
		compatible = "simple-battery";
		charge-full-design-microamp-hours = <4000000>;
		charge-term-current-microamp = <300000>;
		constant-charge-current-max-microamp = <2000000>;
		constant-charge-voltage-max-microvolt = <4300000>;
		factory-internal-resistance-micro-ohms = <91000>;
		voltage-max-design-microvolt = <4138000>;
		voltage-min-design-microvolt = <3400000>;

		ocv-capacity-celsius = <20>;
		ocv-capacity-table-0 =  <4138000 100>, <4083000 95>, <4059000 90>, <4044000 85>,
					<4030000 80>, <4020000 75>, <4006000 70>, <3972000 65>,
					<3934000 60>, <3904000 55>, <3878000 50>, <3857000 45>,
					<3843000 40>, <3826000 35>, <3801000 30>, <3768000 25>,
					<3735000 20>, <3688000 15>, <3621000 10>, <3553000 5>,
					<3400000 0>;
	};

	gpio_keys_control: gpio-keys-control {
		compatible = "gpio-keys";
		pinctrl-0 = <&btn_pins_ctrl>;
		pinctrl-names = "default";

		button-a {
			gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
			label = "EAST";
			linux,code = <BTN_EAST>;
		};

		button-b {
			gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
			label = "SOUTH";
			linux,code = <BTN_SOUTH>;
		};

		button-down {
			gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
			label = "DPAD-DOWN";
			linux,code = <BTN_DPAD_DOWN>;
		};

		button-l1 {
			gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
			label = "TL";
			linux,code = <BTN_TL>;
		};

		button-l2 {
			gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>;
			label = "TL2";
			linux,code = <BTN_TL2>;
		};

		button-left {
			gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
			label = "DPAD-LEFT";
			linux,code = <BTN_DPAD_LEFT>;
		};

		button-right {
			gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>;
			label = "DPAD-RIGHT";
			linux,code = <BTN_DPAD_RIGHT>;
		};

		button-select {
			gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
			label = "SELECT";
			linux,code = <BTN_SELECT>;
		};

		button-start {
			gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
			label = "START";
			linux,code = <BTN_START>;
		};

		button-thumbl {
			gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_LOW>;
			label = "THUMBL";
			linux,code = <BTN_THUMBL>;
		};

		button-thumbr {
			gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
			label = "THUMBR";
			linux,code = <BTN_THUMBR>;
		};

		button-r1 {
			gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
			label = "TR";
			linux,code = <BTN_TR>;
		};

		button-r2 {
			gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>;
			label = "TR2";
			linux,code = <BTN_TR2>;
		};

		button-up {
			gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
			label = "DPAD-UP";
			linux,code = <BTN_DPAD_UP>;
		};

		button-x {
			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
			label = "NORTH";
			linux,code = <BTN_NORTH>;
		};

		button-y {
			gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
			label = "WEST";
			linux,code = <BTN_WEST>;
		};
	};

	gpio_keys_vol: gpio-keys-vol {
		compatible = "gpio-keys";
		autorepeat;
		pinctrl-0 = <&btn_pins_vol>;
		pinctrl-names = "default";

		button-voldown {
			gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
			label = "VOLUMEDOWN";
			linux,code = <KEY_VOLUMEDOWN>;
		};

		button-volup {
			gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
			label = "VOLUMEUP";
			linux,code = <KEY_VOLUMEUP>;
		};
	};

	gpio_leds: gpio-leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&led_pins>;

		red_led: led-0 {
			color = <LED_COLOR_ID_RED>;
			default-state = "off";
			gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
			function = LED_FUNCTION_STATUS;
		};

		green_led: led-1 {
			color = <LED_COLOR_ID_GREEN>;
			default-state = "on";
			gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
			function = LED_FUNCTION_POWER;
		};

		amber_led: led-2 {
			color = <LED_COLOR_ID_AMBER>;
			gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
			function = LED_FUNCTION_CHARGING;
		};

	};

	hdmi-con {
		compatible = "hdmi-connector";
		ddc-i2c-bus = <&i2c5>;
		type = "c";

		port {
			hdmi_con_in: endpoint {
				remote-endpoint = <&hdmi_out_con>;
			};
		};
	};

	sdio_pwrseq: sdio-pwrseq {
		compatible = "mmc-pwrseq-simple";
		clocks = <&rk817 1>;
		clock-names = "ext_clock";
		pinctrl-0 = <&wifi_enable_h>;
		pinctrl-names = "default";
		post-power-on-delay-ms = <200>;
		reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
	};

	/* Channels reversed for both headphones and speakers. */
	sound {
		compatible = "simple-audio-card";
		pinctrl-0 = <&hp_det>;
		pinctrl-names = "default";
		simple-audio-card,name = "rk817_ext";
		simple-audio-card,aux-devs = <&spk_amp>;
		simple-audio-card,format = "i2s";
		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
		simple-audio-card,mclk-fs = <256>;
		simple-audio-card,widgets =
			"Microphone", "Mic Jack",
			"Headphone", "Headphones",
			"Speaker", "Internal Speakers";
		simple-audio-card,routing =
			"MICL", "Mic Jack",
			"Headphones", "HPOL",
			"Headphones", "HPOR",
			"Internal Speakers", "Speaker Amp OUTL",
			"Internal Speakers", "Speaker Amp OUTR",
			"Speaker Amp INL", "HPOL",
			"Speaker Amp INR", "HPOR";
		simple-audio-card,pin-switches = "Internal Speakers";

		simple-audio-card,codec {
			sound-dai = <&rk817>;
		};

		simple-audio-card,cpu {
			sound-dai = <&i2s1_8ch>;
		};
	};

	spk_amp: audio-amplifier {
		compatible = "simple-audio-amplifier";
		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
		pinctrl-0 = <&spk_amp_enable_h>;
		pinctrl-names = "default";
		sound-name-prefix = "Speaker Amp";
	};

	vcc5v0_host: regulator-vcc5v0-host {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
		pinctrl-0 = <&vcc5v0_host_en>;
		pinctrl-names = "default";
		regulator-name = "vcc5v0_host";
		vin-supply = <&dcdc_boost>;
	};

	vcc_lcd: regulator-vcc-lcd {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
		pinctrl-0 = <&vcc_lcd_en>;
		pinctrl-names = "default";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-name = "vcc_lcd";
	};

	vcc_sys: regulator-vcc-sys {
		compatible = "regulator-fixed";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3800000>;
		regulator-max-microvolt = <3800000>;
		regulator-name = "vcc_sys";
	};

	vcc_wifi: regulator-vcc-wifi {
		compatible = "regulator-fixed";
		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
		pinctrl-0 = <&vcc_wifi_h>;
		pinctrl-names = "default";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-name = "vcc_wifi";
	};
};

&combphy1 {
	status = "okay";
};

&cru {
	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
	assigned-clock-rates = <32768>, <1200000000>,
			       <200000000>, <126400000>;
};

&cpu0 {
	cpu-supply = <&vdd_cpu>;
};

&cpu1 {
	cpu-supply = <&vdd_cpu>;
};

&cpu2 {
	cpu-supply = <&vdd_cpu>;
};

&cpu3 {
	cpu-supply = <&vdd_cpu>;
};

&dsi_dphy0 {
	status = "okay";
};

&dsi0 {
	status = "okay";
	#address-cells = <1>;
	#size-cells = <0>;

	ports {
		dsi0_in: port@0 {
			reg = <0>;
			dsi0_in_vp1: endpoint {
				remote-endpoint = <&vp1_out_dsi0>;
			};
		};

		dsi0_out: port@1 {
			reg = <1>;
			mipi_out_panel: endpoint {
				remote-endpoint = <&mipi_in_panel>;
			};
		};
	};

	panel: panel@0 {
		compatible = "powkiddy,x55-panel", "himax,hx8394";
		reg = <0>;
		backlight = <&backlight>;
		iovcc-supply = <&vcc_lcd>;
		pinctrl-names = "default";
		pinctrl-0 = <&lcd_rst>;
		reset-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
		rotation = <270>;
		vcc-supply = <&vcc_lcd>;

		port {
			mipi_in_panel: endpoint {
				remote-endpoint = <&mipi_out_panel>;
			};
		};
	};
};

&gpu {
	mali-supply = <&vdd_gpu>;
	status = "okay";
};

&hdmi {
	ddc-i2c-bus = <&i2c5>;
	pinctrl-0 = <&hdmitxm0_cec>;
	pinctrl-names = "default";
	status = "okay";
};

&hdmi_in {
	hdmi_in_vp0: endpoint {
		remote-endpoint = <&vp0_out_hdmi>;
	};
};

&hdmi_out {
	hdmi_out_con: endpoint {
		remote-endpoint = <&hdmi_con_in>;
	};
};

&hdmi_sound {
	status = "okay";
};

&i2c0 {
	status = "okay";

	rk817: pmic@20 {
		compatible = "rockchip,rk817";
		reg = <0x20>;
		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
		clock-names = "mclk";
		clock-output-names = "rk808-clkout1", "rk808-clkout2";
		clocks = <&cru I2S1_MCLKOUT_TX>;
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
		wakeup-source;
		#clock-cells = <1>;
		#sound-dai-cells = <0>;

		vcc1-supply = <&vcc_sys>;
		vcc2-supply = <&vcc_sys>;
		vcc3-supply = <&vcc_sys>;
		vcc4-supply = <&vcc_sys>;
		vcc5-supply = <&vcc_sys>;
		vcc6-supply = <&vcc_sys>;
		vcc7-supply = <&vcc_sys>;
		vcc8-supply = <&vcc_sys>;
		vcc9-supply = <&dcdc_boost>;

		regulators {
			vdd_logic: DCDC_REG1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <1350000>;
				regulator-ramp-delay = <6001>;
				regulator-initial-mode = <0x2>;
				regulator-name = "vdd_logic";
				regulator-state-mem {
					regulator-off-in-suspend;
					regulator-suspend-microvolt = <900000>;
				};
			};

			vdd_gpu: DCDC_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <1350000>;
				regulator-ramp-delay = <6001>;
				regulator-initial-mode = <0x2>;
				regulator-name = "vdd_gpu";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_ddr: DCDC_REG3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-initial-mode = <0x2>;
				regulator-name = "vcc_ddr";
				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vcc_3v3: DCDC_REG4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-initial-mode = <0x2>;
				regulator-name = "vcc_3v3";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <3300000>;
				};
			};

			vcca1v8_pmu: LDO_REG1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcca1v8_pmu";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1800000>;
				};
			};

			vdda_0v9: LDO_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;
				regulator-name = "vdda_0v9";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda0v9_pmu: LDO_REG3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;
				regulator-name = "vdda0v9_pmu";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <900000>;
				};
			};

			vccio_acodec: LDO_REG4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vccio_acodec";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vccio_sd: LDO_REG5 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vccio_sd";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc3v3_pmu: LDO_REG6 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc3v3_pmu";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <3300000>;
				};
			};

			vcc_1v8: LDO_REG7 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc_1v8";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc1v8_dvp: LDO_REG8 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc1v8_dvp";
				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vcc2v8_dvp: LDO_REG9 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc2v8_dvp";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			dcdc_boost: BOOST {
				regulator-min-microvolt = <4700000>;
				regulator-max-microvolt = <5400000>;
				regulator-name = "boost";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			otg_switch: OTG_SWITCH {
				regulator-name = "otg_switch";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};
		};

		rk817_charger: charger {
			monitored-battery = <&battery>;
			rockchip,resistor-sense-micro-ohms = <10000>;
			rockchip,sleep-enter-current-microamp = <150000>;
			rockchip,sleep-filter-current-microamp = <100000>;
		};

	};

	vdd_cpu: regulator@1c {
		compatible = "tcs,tcs4525";
		reg = <0x1c>;
		fcs,suspend-voltage-selector = <1>;
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <712500>;
		regulator-max-microvolt = <1390000>;
		regulator-name = "vdd_cpu";
		regulator-ramp-delay = <2300>;
		vin-supply = <&vcc_sys>;
		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};
};

&i2c5 {
	pinctrl-0 = <&i2c5m1_xfer>;
	pinctrl-names = "default";
	status = "okay";
};

&i2s0_8ch {
	status = "okay";
};

&i2s1_8ch {
	pinctrl-0 = <&i2s1m0_sclktx>, <&i2s1m0_lrcktx>, <&i2s1m0_sdi0>,
		    <&i2s1m0_sdo0>;
	pinctrl-names = "default";
	rockchip,trcm-sync-tx-only;
	status = "okay";
};

&pinctrl {
	audio-amplifier {
		spk_amp_enable_h: spk-amp-enable-h {
			rockchip,pins =
				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	gpio-control {
		btn_pins_ctrl: btn-pins-ctrl {
			rockchip,pins =
				<3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
				<3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>,
				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
				<4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
				<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
				<4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
				<4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
				<4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
		};

		btn_pins_vol: btn-pins-vol {
			rockchip,pins =
				<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
				<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	gpio-lcd {
		lcd_rst: lcd-rst {
			rockchip,pins =
				<0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	gpio-leds {
		led_pins: led-pins {
			rockchip,pins =
				<4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,
				<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
				<4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	hp-detect {
		hp_det: hp-det {
			rockchip,pins =
				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	pmic {
		pmic_int_l: pmic-int-l {
			rockchip,pins =
				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	sdio-pwrseq {
		wifi_enable_h: wifi-enable-h {
			rockchip,pins =
				<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	usb {
		vcc5v0_host_en: vcc5v0-host-en {
			rockchip,pins =
				<4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
		};

		vcc5v0_otg_en: vcc5v0-otg-en {
			rockchip,pins =
				<4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	vcc-lcd {
		vcc_lcd_en: vcc-lcd-en {
			rockchip,pins =
				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	vcc-wifi {
		vcc_wifi_h: vcc-wifi-h {
			rockchip,pins =
				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};

&pmu_io_domains {
	status = "okay";
	pmuio1-supply = <&vcc3v3_pmu>;
	pmuio2-supply = <&vcca1v8_pmu>;
	vccio1-supply = <&vccio_acodec>;
	vccio3-supply = <&vccio_sd>;
	vccio4-supply = <&vcca1v8_pmu>;
	vccio5-supply = <&vcc2v8_dvp>;
	vccio6-supply = <&vcc1v8_dvp>;
	vccio7-supply = <&vcc_3v3>;
};

&pwm4 {
	status = "okay";
};

&saradc {
	vref-supply = <&vcc_1v8>;
	status = "okay";
};

&sdhci {
	bus-width = <8>;
	mmc-hs200-1_8v;
	non-removable;
	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
		    <&emmc_datastrobe>, <&emmc_rstnout>;
	pinctrl-names = "default";
	status = "okay";
};

&sdmmc0 {
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	disable-wp;
	pinctrl-0 = <&sdmmc0_bus4>, <&sdmmc0_clk>, <&sdmmc0_cmd>,
		    <&sdmmc0_det>;
	pinctrl-names = "default";
	sd-uhs-sdr104;
	vqmmc-supply = <&vccio_sd>;
	status = "okay";
};

&sdmmc1 {
	bus-width = <4>;
	cap-sd-highspeed;
	cap-sdio-irq;
	keep-power-in-suspend;
	mmc-pwrseq = <&sdio_pwrseq>;
	non-removable;
	pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_cmd>, <&sdmmc1_clk>;
	pinctrl-names = "default";
	vmmc-supply = <&vcc_wifi>;
	status = "okay";
};

&sdmmc2 {
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	disable-wp;
	pinctrl-0 = <&sdmmc2m1_bus4>, <&sdmmc2m1_cmd>, <&sdmmc2m1_clk>,
		    <&sdmmc2m1_det>;
	pinctrl-names = "default";
	sd-uhs-sdr104;
	vqmmc-supply = <&vcc2v8_dvp>;
	status = "okay";
};

&tsadc {
	rockchip,hw-tshut-mode = <1>;
	rockchip,hw-tshut-polarity = <0>;
	status = "okay";
};

&uart1 {
	pinctrl-0 = <&uart1m0_xfer>, <&uart1m0_ctsn>, <&uart1m0_rtsn>;
	pinctrl-names = "default";
	uart-has-rtscts;
	status = "okay";

	bluetooth {
		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
		device-wake-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
		enable-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
		host-wake-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
	};
};

&uart2 {
	status = "okay";
};

&usb_host0_xhci {
	phys = <&usb2phy0_otg>;
	phy-names = "usb2-phy";
	status = "okay";
};

&usb_host1_xhci {
	status = "okay";
};

&usb2phy0 {
	status = "okay";
};

&usb2phy0_otg {
	status = "okay";
};

&usb2phy0_host {
	phy-supply = <&vcc5v0_host>;
	status = "okay";
};

&vop {
	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
	status = "okay";
};

&vop_mmu {
	status = "okay";
};

&vp0 {
	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
		remote-endpoint = <&hdmi_in_vp0>;
	};
};

&vp1 {
	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
		remote-endpoint = <&dsi0_in_vp1>;
	};
};