| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * I2C client/driver for the ST M41T80 family of i2c rtc chips. |
| * |
| * Author: Alexander Bigga <ab@mycable.de> |
| * |
| * Based on m41t00.c by Mark A. Greer <mgreer@mvista.com> |
| * |
| * 2006 (c) mycable GmbH |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/bcd.h> |
| #include <linux/clk-provider.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/rtc.h> |
| #include <linux/slab.h> |
| #include <linux/mutex.h> |
| #include <linux/string.h> |
| #ifdef CONFIG_RTC_DRV_M41T80_WDT |
| #include <linux/fs.h> |
| #include <linux/ioctl.h> |
| #include <linux/miscdevice.h> |
| #include <linux/reboot.h> |
| #include <linux/watchdog.h> |
| #endif |
| |
| #define M41T80_REG_SSEC 0x00 |
| #define M41T80_REG_SEC 0x01 |
| #define M41T80_REG_MIN 0x02 |
| #define M41T80_REG_HOUR 0x03 |
| #define M41T80_REG_WDAY 0x04 |
| #define M41T80_REG_DAY 0x05 |
| #define M41T80_REG_MON 0x06 |
| #define M41T80_REG_YEAR 0x07 |
| #define M41T80_REG_ALARM_MON 0x0a |
| #define M41T80_REG_ALARM_DAY 0x0b |
| #define M41T80_REG_ALARM_HOUR 0x0c |
| #define M41T80_REG_ALARM_MIN 0x0d |
| #define M41T80_REG_ALARM_SEC 0x0e |
| #define M41T80_REG_FLAGS 0x0f |
| #define M41T80_REG_SQW 0x13 |
| |
| #define M41T80_DATETIME_REG_SIZE (M41T80_REG_YEAR + 1) |
| #define M41T80_ALARM_REG_SIZE \ |
| (M41T80_REG_ALARM_SEC + 1 - M41T80_REG_ALARM_MON) |
| |
| #define M41T80_SQW_MAX_FREQ 32768 |
| |
| #define M41T80_SEC_ST BIT(7) /* ST: Stop Bit */ |
| #define M41T80_ALMON_AFE BIT(7) /* AFE: AF Enable Bit */ |
| #define M41T80_ALMON_SQWE BIT(6) /* SQWE: SQW Enable Bit */ |
| #define M41T80_ALHOUR_HT BIT(6) /* HT: Halt Update Bit */ |
| #define M41T80_FLAGS_OF BIT(2) /* OF: Oscillator Failure Bit */ |
| #define M41T80_FLAGS_AF BIT(6) /* AF: Alarm Flag Bit */ |
| #define M41T80_FLAGS_BATT_LOW BIT(4) /* BL: Battery Low Bit */ |
| #define M41T80_WATCHDOG_RB2 BIT(7) /* RB: Watchdog resolution */ |
| #define M41T80_WATCHDOG_RB1 BIT(1) /* RB: Watchdog resolution */ |
| #define M41T80_WATCHDOG_RB0 BIT(0) /* RB: Watchdog resolution */ |
| |
| #define M41T80_FEATURE_HT BIT(0) /* Halt feature */ |
| #define M41T80_FEATURE_BL BIT(1) /* Battery low indicator */ |
| #define M41T80_FEATURE_SQ BIT(2) /* Squarewave feature */ |
| #define M41T80_FEATURE_WD BIT(3) /* Extra watchdog resolution */ |
| #define M41T80_FEATURE_SQ_ALT BIT(4) /* RSx bits are in reg 4 */ |
| |
| static const struct i2c_device_id m41t80_id[] = { |
| { "m41t62", M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT }, |
| { "m41t65", M41T80_FEATURE_HT | M41T80_FEATURE_WD }, |
| { "m41t80", M41T80_FEATURE_SQ }, |
| { "m41t81", M41T80_FEATURE_HT | M41T80_FEATURE_SQ}, |
| { "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, |
| { "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, |
| { "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, |
| { "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, |
| { "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, |
| { "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, |
| { "rv4162", M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, m41t80_id); |
| |
| static const struct of_device_id m41t80_of_match[] = { |
| { |
| .compatible = "st,m41t62", |
| .data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT) |
| }, |
| { |
| .compatible = "st,m41t65", |
| .data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_WD) |
| }, |
| { |
| .compatible = "st,m41t80", |
| .data = (void *)(M41T80_FEATURE_SQ) |
| }, |
| { |
| .compatible = "st,m41t81", |
| .data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_SQ) |
| }, |
| { |
| .compatible = "st,m41t81s", |
| .data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ) |
| }, |
| { |
| .compatible = "st,m41t82", |
| .data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ) |
| }, |
| { |
| .compatible = "st,m41t83", |
| .data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ) |
| }, |
| { |
| .compatible = "st,m41t84", |
| .data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ) |
| }, |
| { |
| .compatible = "st,m41t85", |
| .data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ) |
| }, |
| { |
| .compatible = "st,m41t87", |
| .data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ) |
| }, |
| { |
| .compatible = "microcrystal,rv4162", |
| .data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT) |
| }, |
| /* DT compatibility only, do not use compatibles below: */ |
| { |
| .compatible = "st,rv4162", |
| .data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT) |
| }, |
| { |
| .compatible = "rv4162", |
| .data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT) |
| }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, m41t80_of_match); |
| |
| struct m41t80_data { |
| unsigned long features; |
| struct i2c_client *client; |
| struct rtc_device *rtc; |
| #ifdef CONFIG_COMMON_CLK |
| struct clk_hw sqw; |
| unsigned long freq; |
| unsigned int sqwe; |
| #endif |
| }; |
| |
| static irqreturn_t m41t80_handle_irq(int irq, void *dev_id) |
| { |
| struct i2c_client *client = dev_id; |
| struct m41t80_data *m41t80 = i2c_get_clientdata(client); |
| struct mutex *lock = &m41t80->rtc->ops_lock; |
| unsigned long events = 0; |
| int flags, flags_afe; |
| |
| mutex_lock(lock); |
| |
| flags_afe = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON); |
| if (flags_afe < 0) { |
| mutex_unlock(lock); |
| return IRQ_NONE; |
| } |
| |
| flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS); |
| if (flags <= 0) { |
| mutex_unlock(lock); |
| return IRQ_NONE; |
| } |
| |
| if (flags & M41T80_FLAGS_AF) { |
| flags &= ~M41T80_FLAGS_AF; |
| flags_afe &= ~M41T80_ALMON_AFE; |
| events |= RTC_AF; |
| } |
| |
| if (events) { |
| rtc_update_irq(m41t80->rtc, 1, events); |
| i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS, flags); |
| i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, |
| flags_afe); |
| } |
| |
| mutex_unlock(lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int m41t80_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| unsigned char buf[8]; |
| int err, flags; |
| |
| flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS); |
| if (flags < 0) |
| return flags; |
| |
| if (flags & M41T80_FLAGS_OF) { |
| dev_err(&client->dev, "Oscillator failure, data is invalid.\n"); |
| return -EINVAL; |
| } |
| |
| err = i2c_smbus_read_i2c_block_data(client, M41T80_REG_SSEC, |
| sizeof(buf), buf); |
| if (err < 0) { |
| dev_err(&client->dev, "Unable to read date\n"); |
| return err; |
| } |
| |
| tm->tm_sec = bcd2bin(buf[M41T80_REG_SEC] & 0x7f); |
| tm->tm_min = bcd2bin(buf[M41T80_REG_MIN] & 0x7f); |
| tm->tm_hour = bcd2bin(buf[M41T80_REG_HOUR] & 0x3f); |
| tm->tm_mday = bcd2bin(buf[M41T80_REG_DAY] & 0x3f); |
| tm->tm_wday = buf[M41T80_REG_WDAY] & 0x07; |
| tm->tm_mon = bcd2bin(buf[M41T80_REG_MON] & 0x1f) - 1; |
| |
| /* assume 20YY not 19YY, and ignore the Century Bit */ |
| tm->tm_year = bcd2bin(buf[M41T80_REG_YEAR]) + 100; |
| return 0; |
| } |
| |
| static int m41t80_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct m41t80_data *clientdata = i2c_get_clientdata(client); |
| unsigned char buf[8]; |
| int err, flags; |
| |
| buf[M41T80_REG_SSEC] = 0; |
| buf[M41T80_REG_SEC] = bin2bcd(tm->tm_sec); |
| buf[M41T80_REG_MIN] = bin2bcd(tm->tm_min); |
| buf[M41T80_REG_HOUR] = bin2bcd(tm->tm_hour); |
| buf[M41T80_REG_DAY] = bin2bcd(tm->tm_mday); |
| buf[M41T80_REG_MON] = bin2bcd(tm->tm_mon + 1); |
| buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year - 100); |
| buf[M41T80_REG_WDAY] = tm->tm_wday; |
| |
| /* If the square wave output is controlled in the weekday register */ |
| if (clientdata->features & M41T80_FEATURE_SQ_ALT) { |
| int val; |
| |
| val = i2c_smbus_read_byte_data(client, M41T80_REG_WDAY); |
| if (val < 0) |
| return val; |
| |
| buf[M41T80_REG_WDAY] |= (val & 0xf0); |
| } |
| |
| err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_SSEC, |
| sizeof(buf), buf); |
| if (err < 0) { |
| dev_err(&client->dev, "Unable to write to date registers\n"); |
| return err; |
| } |
| |
| /* Clear the OF bit of Flags Register */ |
| flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS); |
| if (flags < 0) |
| return flags; |
| |
| err = i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS, |
| flags & ~M41T80_FLAGS_OF); |
| if (err < 0) { |
| dev_err(&client->dev, "Unable to write flags register\n"); |
| return err; |
| } |
| |
| return err; |
| } |
| |
| static int m41t80_rtc_proc(struct device *dev, struct seq_file *seq) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct m41t80_data *clientdata = i2c_get_clientdata(client); |
| int reg; |
| |
| if (clientdata->features & M41T80_FEATURE_BL) { |
| reg = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS); |
| if (reg < 0) |
| return reg; |
| seq_printf(seq, "battery\t\t: %s\n", |
| (reg & M41T80_FLAGS_BATT_LOW) ? "exhausted" : "ok"); |
| } |
| return 0; |
| } |
| |
| static int m41t80_alarm_irq_enable(struct device *dev, unsigned int enabled) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| int flags, retval; |
| |
| flags = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON); |
| if (flags < 0) |
| return flags; |
| |
| if (enabled) |
| flags |= M41T80_ALMON_AFE; |
| else |
| flags &= ~M41T80_ALMON_AFE; |
| |
| retval = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, flags); |
| if (retval < 0) { |
| dev_err(dev, "Unable to enable alarm IRQ %d\n", retval); |
| return retval; |
| } |
| return 0; |
| } |
| |
| static int m41t80_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| u8 alarmvals[5]; |
| int ret, err; |
| |
| alarmvals[0] = bin2bcd(alrm->time.tm_mon + 1); |
| alarmvals[1] = bin2bcd(alrm->time.tm_mday); |
| alarmvals[2] = bin2bcd(alrm->time.tm_hour); |
| alarmvals[3] = bin2bcd(alrm->time.tm_min); |
| alarmvals[4] = bin2bcd(alrm->time.tm_sec); |
| |
| /* Clear AF and AFE flags */ |
| ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON); |
| if (ret < 0) |
| return ret; |
| err = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, |
| ret & ~(M41T80_ALMON_AFE)); |
| if (err < 0) { |
| dev_err(dev, "Unable to clear AFE bit\n"); |
| return err; |
| } |
| |
| /* Keep SQWE bit value */ |
| alarmvals[0] |= (ret & M41T80_ALMON_SQWE); |
| |
| ret = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS); |
| if (ret < 0) |
| return ret; |
| |
| err = i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS, |
| ret & ~(M41T80_FLAGS_AF)); |
| if (err < 0) { |
| dev_err(dev, "Unable to clear AF bit\n"); |
| return err; |
| } |
| |
| /* Write the alarm */ |
| err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_ALARM_MON, |
| 5, alarmvals); |
| if (err) |
| return err; |
| |
| /* Enable the alarm interrupt */ |
| if (alrm->enabled) { |
| alarmvals[0] |= M41T80_ALMON_AFE; |
| err = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, |
| alarmvals[0]); |
| if (err) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int m41t80_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| u8 alarmvals[5]; |
| int flags, ret; |
| |
| ret = i2c_smbus_read_i2c_block_data(client, M41T80_REG_ALARM_MON, |
| 5, alarmvals); |
| if (ret != 5) |
| return ret < 0 ? ret : -EIO; |
| |
| flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS); |
| if (flags < 0) |
| return flags; |
| |
| alrm->time.tm_sec = bcd2bin(alarmvals[4] & 0x7f); |
| alrm->time.tm_min = bcd2bin(alarmvals[3] & 0x7f); |
| alrm->time.tm_hour = bcd2bin(alarmvals[2] & 0x3f); |
| alrm->time.tm_mday = bcd2bin(alarmvals[1] & 0x3f); |
| alrm->time.tm_mon = bcd2bin(alarmvals[0] & 0x3f) - 1; |
| |
| alrm->enabled = !!(alarmvals[0] & M41T80_ALMON_AFE); |
| alrm->pending = (flags & M41T80_FLAGS_AF) && alrm->enabled; |
| |
| return 0; |
| } |
| |
| static struct rtc_class_ops m41t80_rtc_ops = { |
| .read_time = m41t80_rtc_read_time, |
| .set_time = m41t80_rtc_set_time, |
| .proc = m41t80_rtc_proc, |
| }; |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int m41t80_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| |
| if (client->irq >= 0 && device_may_wakeup(dev)) |
| enable_irq_wake(client->irq); |
| |
| return 0; |
| } |
| |
| static int m41t80_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| |
| if (client->irq >= 0 && device_may_wakeup(dev)) |
| disable_irq_wake(client->irq); |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(m41t80_pm, m41t80_suspend, m41t80_resume); |
| |
| #ifdef CONFIG_COMMON_CLK |
| #define sqw_to_m41t80_data(_hw) container_of(_hw, struct m41t80_data, sqw) |
| |
| static unsigned long m41t80_decode_freq(int setting) |
| { |
| return (setting == 0) ? 0 : (setting == 1) ? M41T80_SQW_MAX_FREQ : |
| M41T80_SQW_MAX_FREQ >> setting; |
| } |
| |
| static unsigned long m41t80_get_freq(struct m41t80_data *m41t80) |
| { |
| struct i2c_client *client = m41t80->client; |
| int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ? |
| M41T80_REG_WDAY : M41T80_REG_SQW; |
| int ret = i2c_smbus_read_byte_data(client, reg_sqw); |
| |
| if (ret < 0) |
| return 0; |
| return m41t80_decode_freq(ret >> 4); |
| } |
| |
| static unsigned long m41t80_sqw_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| return sqw_to_m41t80_data(hw)->freq; |
| } |
| |
| static long m41t80_sqw_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate) |
| { |
| if (rate >= M41T80_SQW_MAX_FREQ) |
| return M41T80_SQW_MAX_FREQ; |
| if (rate >= M41T80_SQW_MAX_FREQ / 4) |
| return M41T80_SQW_MAX_FREQ / 4; |
| if (!rate) |
| return 0; |
| return 1 << ilog2(rate); |
| } |
| |
| static int m41t80_sqw_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw); |
| struct i2c_client *client = m41t80->client; |
| int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ? |
| M41T80_REG_WDAY : M41T80_REG_SQW; |
| int reg, ret, val = 0; |
| |
| if (rate >= M41T80_SQW_MAX_FREQ) |
| val = 1; |
| else if (rate >= M41T80_SQW_MAX_FREQ / 4) |
| val = 2; |
| else if (rate) |
| val = 15 - ilog2(rate); |
| |
| reg = i2c_smbus_read_byte_data(client, reg_sqw); |
| if (reg < 0) |
| return reg; |
| |
| reg = (reg & 0x0f) | (val << 4); |
| |
| ret = i2c_smbus_write_byte_data(client, reg_sqw, reg); |
| if (!ret) |
| m41t80->freq = m41t80_decode_freq(val); |
| return ret; |
| } |
| |
| static int m41t80_sqw_control(struct clk_hw *hw, bool enable) |
| { |
| struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw); |
| struct i2c_client *client = m41t80->client; |
| int ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON); |
| |
| if (ret < 0) |
| return ret; |
| |
| if (enable) |
| ret |= M41T80_ALMON_SQWE; |
| else |
| ret &= ~M41T80_ALMON_SQWE; |
| |
| ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, ret); |
| if (!ret) |
| m41t80->sqwe = enable; |
| return ret; |
| } |
| |
| static int m41t80_sqw_prepare(struct clk_hw *hw) |
| { |
| return m41t80_sqw_control(hw, 1); |
| } |
| |
| static void m41t80_sqw_unprepare(struct clk_hw *hw) |
| { |
| m41t80_sqw_control(hw, 0); |
| } |
| |
| static int m41t80_sqw_is_prepared(struct clk_hw *hw) |
| { |
| return sqw_to_m41t80_data(hw)->sqwe; |
| } |
| |
| static const struct clk_ops m41t80_sqw_ops = { |
| .prepare = m41t80_sqw_prepare, |
| .unprepare = m41t80_sqw_unprepare, |
| .is_prepared = m41t80_sqw_is_prepared, |
| .recalc_rate = m41t80_sqw_recalc_rate, |
| .round_rate = m41t80_sqw_round_rate, |
| .set_rate = m41t80_sqw_set_rate, |
| }; |
| |
| static struct clk *m41t80_sqw_register_clk(struct m41t80_data *m41t80) |
| { |
| struct i2c_client *client = m41t80->client; |
| struct device_node *node = client->dev.of_node; |
| struct clk *clk; |
| struct clk_init_data init; |
| int ret; |
| |
| /* First disable the clock */ |
| ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON); |
| if (ret < 0) |
| return ERR_PTR(ret); |
| ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, |
| ret & ~(M41T80_ALMON_SQWE)); |
| if (ret < 0) |
| return ERR_PTR(ret); |
| |
| init.name = "m41t80-sqw"; |
| init.ops = &m41t80_sqw_ops; |
| init.flags = 0; |
| init.parent_names = NULL; |
| init.num_parents = 0; |
| m41t80->sqw.init = &init; |
| m41t80->freq = m41t80_get_freq(m41t80); |
| |
| /* optional override of the clockname */ |
| of_property_read_string(node, "clock-output-names", &init.name); |
| |
| /* register the clock */ |
| clk = clk_register(&client->dev, &m41t80->sqw); |
| if (!IS_ERR(clk)) |
| of_clk_add_provider(node, of_clk_src_simple_get, clk); |
| |
| return clk; |
| } |
| #endif |
| |
| #ifdef CONFIG_RTC_DRV_M41T80_WDT |
| /* |
| ***************************************************************************** |
| * |
| * Watchdog Driver |
| * |
| ***************************************************************************** |
| */ |
| static DEFINE_MUTEX(m41t80_rtc_mutex); |
| static struct i2c_client *save_client; |
| |
| /* Default margin */ |
| #define WD_TIMO 60 /* 1..31 seconds */ |
| |
| static int wdt_margin = WD_TIMO; |
| module_param(wdt_margin, int, 0); |
| MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default 60s)"); |
| |
| static unsigned long wdt_is_open; |
| static int boot_flag; |
| |
| /** |
| * wdt_ping: |
| * |
| * Reload counter one with the watchdog timeout. We don't bother reloading |
| * the cascade counter. |
| */ |
| static void wdt_ping(void) |
| { |
| unsigned char i2c_data[2]; |
| struct i2c_msg msgs1[1] = { |
| { |
| .addr = save_client->addr, |
| .flags = 0, |
| .len = 2, |
| .buf = i2c_data, |
| }, |
| }; |
| struct m41t80_data *clientdata = i2c_get_clientdata(save_client); |
| |
| i2c_data[0] = 0x09; /* watchdog register */ |
| |
| if (wdt_margin > 31) |
| i2c_data[1] = (wdt_margin & 0xFC) | 0x83; /* resolution = 4s */ |
| else |
| /* |
| * WDS = 1 (0x80), mulitplier = WD_TIMO, resolution = 1s (0x02) |
| */ |
| i2c_data[1] = wdt_margin << 2 | 0x82; |
| |
| /* |
| * M41T65 has three bits for watchdog resolution. Don't set bit 7, as |
| * that would be an invalid resolution. |
| */ |
| if (clientdata->features & M41T80_FEATURE_WD) |
| i2c_data[1] &= ~M41T80_WATCHDOG_RB2; |
| |
| i2c_transfer(save_client->adapter, msgs1, 1); |
| } |
| |
| /** |
| * wdt_disable: |
| * |
| * disables watchdog. |
| */ |
| static void wdt_disable(void) |
| { |
| unsigned char i2c_data[2], i2c_buf[0x10]; |
| struct i2c_msg msgs0[2] = { |
| { |
| .addr = save_client->addr, |
| .flags = 0, |
| .len = 1, |
| .buf = i2c_data, |
| }, |
| { |
| .addr = save_client->addr, |
| .flags = I2C_M_RD, |
| .len = 1, |
| .buf = i2c_buf, |
| }, |
| }; |
| struct i2c_msg msgs1[1] = { |
| { |
| .addr = save_client->addr, |
| .flags = 0, |
| .len = 2, |
| .buf = i2c_data, |
| }, |
| }; |
| |
| i2c_data[0] = 0x09; |
| i2c_transfer(save_client->adapter, msgs0, 2); |
| |
| i2c_data[0] = 0x09; |
| i2c_data[1] = 0x00; |
| i2c_transfer(save_client->adapter, msgs1, 1); |
| } |
| |
| /** |
| * wdt_write: |
| * @file: file handle to the watchdog |
| * @buf: buffer to write (unused as data does not matter here |
| * @count: count of bytes |
| * @ppos: pointer to the position to write. No seeks allowed |
| * |
| * A write to a watchdog device is defined as a keepalive signal. Any |
| * write of data will do, as we we don't define content meaning. |
| */ |
| static ssize_t wdt_write(struct file *file, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| if (count) { |
| wdt_ping(); |
| return 1; |
| } |
| return 0; |
| } |
| |
| static ssize_t wdt_read(struct file *file, char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| return 0; |
| } |
| |
| /** |
| * wdt_ioctl: |
| * @file: file handle to the device |
| * @cmd: watchdog command |
| * @arg: argument pointer |
| * |
| * The watchdog API defines a common set of functions for all watchdogs |
| * according to their available features. We only actually usefully support |
| * querying capabilities and current status. |
| */ |
| static int wdt_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| int new_margin, rv; |
| static struct watchdog_info ident = { |
| .options = WDIOF_POWERUNDER | WDIOF_KEEPALIVEPING | |
| WDIOF_SETTIMEOUT, |
| .firmware_version = 1, |
| .identity = "M41T80 WTD" |
| }; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| return copy_to_user((struct watchdog_info __user *)arg, &ident, |
| sizeof(ident)) ? -EFAULT : 0; |
| |
| case WDIOC_GETSTATUS: |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(boot_flag, (int __user *)arg); |
| case WDIOC_KEEPALIVE: |
| wdt_ping(); |
| return 0; |
| case WDIOC_SETTIMEOUT: |
| if (get_user(new_margin, (int __user *)arg)) |
| return -EFAULT; |
| /* Arbitrary, can't find the card's limits */ |
| if (new_margin < 1 || new_margin > 124) |
| return -EINVAL; |
| wdt_margin = new_margin; |
| wdt_ping(); |
| fallthrough; |
| case WDIOC_GETTIMEOUT: |
| return put_user(wdt_margin, (int __user *)arg); |
| |
| case WDIOC_SETOPTIONS: |
| if (copy_from_user(&rv, (int __user *)arg, sizeof(int))) |
| return -EFAULT; |
| |
| if (rv & WDIOS_DISABLECARD) { |
| pr_info("disable watchdog\n"); |
| wdt_disable(); |
| } |
| |
| if (rv & WDIOS_ENABLECARD) { |
| pr_info("enable watchdog\n"); |
| wdt_ping(); |
| } |
| |
| return -EINVAL; |
| } |
| return -ENOTTY; |
| } |
| |
| static long wdt_unlocked_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| int ret; |
| |
| mutex_lock(&m41t80_rtc_mutex); |
| ret = wdt_ioctl(file, cmd, arg); |
| mutex_unlock(&m41t80_rtc_mutex); |
| |
| return ret; |
| } |
| |
| /** |
| * wdt_open: |
| * @inode: inode of device |
| * @file: file handle to device |
| * |
| */ |
| static int wdt_open(struct inode *inode, struct file *file) |
| { |
| if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) { |
| mutex_lock(&m41t80_rtc_mutex); |
| if (test_and_set_bit(0, &wdt_is_open)) { |
| mutex_unlock(&m41t80_rtc_mutex); |
| return -EBUSY; |
| } |
| /* |
| * Activate |
| */ |
| wdt_is_open = 1; |
| mutex_unlock(&m41t80_rtc_mutex); |
| return stream_open(inode, file); |
| } |
| return -ENODEV; |
| } |
| |
| /** |
| * wdt_close: |
| * @inode: inode to board |
| * @file: file handle to board |
| * |
| */ |
| static int wdt_release(struct inode *inode, struct file *file) |
| { |
| if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) |
| clear_bit(0, &wdt_is_open); |
| return 0; |
| } |
| |
| /** |
| * notify_sys: |
| * @this: our notifier block |
| * @code: the event being reported |
| * @unused: unused |
| * |
| * Our notifier is called on system shutdowns. We want to turn the card |
| * off at reboot otherwise the machine will reboot again during memory |
| * test or worse yet during the following fsck. This would suck, in fact |
| * trust me - if it happens it does suck. |
| */ |
| static int wdt_notify_sys(struct notifier_block *this, unsigned long code, |
| void *unused) |
| { |
| if (code == SYS_DOWN || code == SYS_HALT) |
| /* Disable Watchdog */ |
| wdt_disable(); |
| return NOTIFY_DONE; |
| } |
| |
| static const struct file_operations wdt_fops = { |
| .owner = THIS_MODULE, |
| .read = wdt_read, |
| .unlocked_ioctl = wdt_unlocked_ioctl, |
| .compat_ioctl = compat_ptr_ioctl, |
| .write = wdt_write, |
| .open = wdt_open, |
| .release = wdt_release, |
| .llseek = no_llseek, |
| }; |
| |
| static struct miscdevice wdt_dev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &wdt_fops, |
| }; |
| |
| /* |
| * The WDT card needs to learn about soft shutdowns in order to |
| * turn the timebomb registers off. |
| */ |
| static struct notifier_block wdt_notifier = { |
| .notifier_call = wdt_notify_sys, |
| }; |
| #endif /* CONFIG_RTC_DRV_M41T80_WDT */ |
| |
| /* |
| ***************************************************************************** |
| * |
| * Driver Interface |
| * |
| ***************************************************************************** |
| */ |
| |
| static int m41t80_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| int rc = 0; |
| struct rtc_time tm; |
| struct m41t80_data *m41t80_data = NULL; |
| bool wakeup_source = false; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK | |
| I2C_FUNC_SMBUS_BYTE_DATA)) { |
| dev_err(&adapter->dev, "doesn't support I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK\n"); |
| return -ENODEV; |
| } |
| |
| m41t80_data = devm_kzalloc(&client->dev, sizeof(*m41t80_data), |
| GFP_KERNEL); |
| if (!m41t80_data) |
| return -ENOMEM; |
| |
| m41t80_data->client = client; |
| if (client->dev.of_node) |
| m41t80_data->features = (unsigned long) |
| of_device_get_match_data(&client->dev); |
| else |
| m41t80_data->features = id->driver_data; |
| i2c_set_clientdata(client, m41t80_data); |
| |
| m41t80_data->rtc = devm_rtc_allocate_device(&client->dev); |
| if (IS_ERR(m41t80_data->rtc)) |
| return PTR_ERR(m41t80_data->rtc); |
| |
| #ifdef CONFIG_OF |
| wakeup_source = of_property_read_bool(client->dev.of_node, |
| "wakeup-source"); |
| #endif |
| if (client->irq > 0) { |
| rc = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, m41t80_handle_irq, |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT, |
| "m41t80", client); |
| if (rc) { |
| dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n"); |
| client->irq = 0; |
| wakeup_source = false; |
| } |
| } |
| if (client->irq > 0 || wakeup_source) { |
| m41t80_rtc_ops.read_alarm = m41t80_read_alarm; |
| m41t80_rtc_ops.set_alarm = m41t80_set_alarm; |
| m41t80_rtc_ops.alarm_irq_enable = m41t80_alarm_irq_enable; |
| /* Enable the wakealarm */ |
| device_init_wakeup(&client->dev, true); |
| } |
| |
| m41t80_data->rtc->ops = &m41t80_rtc_ops; |
| m41t80_data->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; |
| m41t80_data->rtc->range_max = RTC_TIMESTAMP_END_2099; |
| |
| if (client->irq <= 0) { |
| /* We cannot support UIE mode if we do not have an IRQ line */ |
| m41t80_data->rtc->uie_unsupported = 1; |
| } |
| |
| /* Make sure HT (Halt Update) bit is cleared */ |
| rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_HOUR); |
| |
| if (rc >= 0 && rc & M41T80_ALHOUR_HT) { |
| if (m41t80_data->features & M41T80_FEATURE_HT) { |
| m41t80_rtc_read_time(&client->dev, &tm); |
| dev_info(&client->dev, "HT bit was set!\n"); |
| dev_info(&client->dev, "Power Down at %ptR\n", &tm); |
| } |
| rc = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_HOUR, |
| rc & ~M41T80_ALHOUR_HT); |
| } |
| |
| if (rc < 0) { |
| dev_err(&client->dev, "Can't clear HT bit\n"); |
| return rc; |
| } |
| |
| /* Make sure ST (stop) bit is cleared */ |
| rc = i2c_smbus_read_byte_data(client, M41T80_REG_SEC); |
| |
| if (rc >= 0 && rc & M41T80_SEC_ST) |
| rc = i2c_smbus_write_byte_data(client, M41T80_REG_SEC, |
| rc & ~M41T80_SEC_ST); |
| if (rc < 0) { |
| dev_err(&client->dev, "Can't clear ST bit\n"); |
| return rc; |
| } |
| |
| #ifdef CONFIG_RTC_DRV_M41T80_WDT |
| if (m41t80_data->features & M41T80_FEATURE_HT) { |
| save_client = client; |
| rc = misc_register(&wdt_dev); |
| if (rc) |
| return rc; |
| rc = register_reboot_notifier(&wdt_notifier); |
| if (rc) { |
| misc_deregister(&wdt_dev); |
| return rc; |
| } |
| } |
| #endif |
| #ifdef CONFIG_COMMON_CLK |
| if (m41t80_data->features & M41T80_FEATURE_SQ) |
| m41t80_sqw_register_clk(m41t80_data); |
| #endif |
| |
| rc = rtc_register_device(m41t80_data->rtc); |
| if (rc) |
| return rc; |
| |
| return 0; |
| } |
| |
| static int m41t80_remove(struct i2c_client *client) |
| { |
| #ifdef CONFIG_RTC_DRV_M41T80_WDT |
| struct m41t80_data *clientdata = i2c_get_clientdata(client); |
| |
| if (clientdata->features & M41T80_FEATURE_HT) { |
| misc_deregister(&wdt_dev); |
| unregister_reboot_notifier(&wdt_notifier); |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| static struct i2c_driver m41t80_driver = { |
| .driver = { |
| .name = "rtc-m41t80", |
| .of_match_table = of_match_ptr(m41t80_of_match), |
| .pm = &m41t80_pm, |
| }, |
| .probe = m41t80_probe, |
| .remove = m41t80_remove, |
| .id_table = m41t80_id, |
| }; |
| |
| module_i2c_driver(m41t80_driver); |
| |
| MODULE_AUTHOR("Alexander Bigga <ab@mycable.de>"); |
| MODULE_DESCRIPTION("ST Microelectronics M41T80 series RTC I2C Client Driver"); |
| MODULE_LICENSE("GPL"); |