P4080/eLBC: Make Freescale elbc interrupt common to elbc devices

Move Freescale elbc interrupt from nand driver to elbc driver.
Then all elbc devices can use the interrupt instead of ONLY nand.

For former nand driver, it had the two functions:

1. detecting nand flash partitions;
2. registering elbc interrupt.

Now, second function is removed to fsl_lbc.c.

Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: Wood Scott-B07421 <B07421@freescale.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 631e5a0..44df1ba 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -687,9 +687,12 @@
 	bool
 
 config FSL_LBC
-	bool
+	bool "Freescale Local Bus support"
+	depends on FSL_SOC
 	help
-	  Freescale Localbus support
+	  Enables reporting of errors from the Freescale local bus
+	  controller.  Also contains some common code used by
+	  drivers for specific local bus peripherals.
 
 config FSL_GTM
 	bool
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 1b5a210..06a1112 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -1,9 +1,10 @@
 /* Freescale Local Bus Controller
  *
- * Copyright (c) 2006-2007 Freescale Semiconductor
+ * Copyright © 2006-2007, 2010 Freescale Semiconductor
  *
  * Authors: Nick Spence <nick.spence@freescale.com>,
  *          Scott Wood <scottwood@freescale.com>
+ *          Jack Lan <jack.lan@freescale.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,6 +27,8 @@
 #include <linux/compiler.h>
 #include <linux/types.h>
 #include <linux/io.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
 
 struct fsl_lbc_bank {
 	__be32 br;             /**< Base Register  */
@@ -125,13 +128,23 @@
 #define LTESR_ATMW 0x00800000
 #define LTESR_ATMR 0x00400000
 #define LTESR_CS   0x00080000
+#define LTESR_UPM  0x00000002
 #define LTESR_CC   0x00000001
 #define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
+#define LTESR_MASK      (LTESR_BM | LTESR_FCT | LTESR_PAR | LTESR_WP \
+			 | LTESR_ATMW | LTESR_ATMR | LTESR_CS | LTESR_UPM \
+			 | LTESR_CC)
+#define LTESR_CLEAR	0xFFFFFFFF
+#define LTECCR_CLEAR	0xFFFFFFFF
+#define LTESR_STATUS	LTESR_MASK
+#define LTEIR_ENABLE	LTESR_MASK
+#define LTEDR_ENABLE	0x00000000
 	__be32 ltedr;           /**< Transfer Error Disable Register */
 	__be32 lteir;           /**< Transfer Error Interrupt Register */
 	__be32 lteatr;          /**< Transfer Error Attributes Register */
 	__be32 ltear;           /**< Transfer Error Address Register */
-	u8 res6[0xC];
+	__be32 lteccr;          /**< Transfer Error ECC Register */
+	u8 res6[0x8];
 	__be32 lbcr;            /**< Configuration Register */
 #define LBCR_LDIS  0x80000000
 #define LBCR_LDIS_SHIFT    31
@@ -265,7 +278,23 @@
 		cpu_relax();
 }
 
+/* overview of the fsl lbc controller */
+
+struct fsl_lbc_ctrl {
+	/* device info */
+	struct device			*dev;
+	struct fsl_lbc_regs __iomem	*regs;
+	int				irq;
+	wait_queue_head_t		irq_wait;
+	spinlock_t			lock;
+	void				*nand;
+
+	/* status read from LTESR by irq handler */
+	unsigned int			irq_status;
+};
+
 extern int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base,
 			       u32 mar);
+extern struct fsl_lbc_ctrl *fsl_lbc_ctrl_dev;
 
 #endif /* __ASM_FSL_LBC_H */
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index dceb8d1..91c9c53 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -1,9 +1,12 @@
 /*
  * Freescale LBC and UPM routines.
  *
- * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ * Copyright © 2007-2008  MontaVista Software, Inc.
+ * Copyright © 2010 Freescale Semiconductor
  *
  * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ * Author: Jack Lan <Jack.Lan@freescale.com>
+ * Author: Roy Zang <tie-fei.zang@freescale.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -19,39 +22,16 @@
 #include <linux/types.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
 #include <asm/prom.h>
 #include <asm/fsl_lbc.h>
 
 static spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock);
-static struct fsl_lbc_regs __iomem *fsl_lbc_regs;
-
-static char __initdata *compat_lbc[] = {
-	"fsl,pq2-localbus",
-	"fsl,pq2pro-localbus",
-	"fsl,pq3-localbus",
-	"fsl,elbc",
-};
-
-static int __init fsl_lbc_init(void)
-{
-	struct device_node *lbus;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(compat_lbc); i++) {
-		lbus = of_find_compatible_node(NULL, NULL, compat_lbc[i]);
-		if (lbus)
-			goto found;
-	}
-	return -ENODEV;
-
-found:
-	fsl_lbc_regs = of_iomap(lbus, 0);
-	of_node_put(lbus);
-	if (!fsl_lbc_regs)
-		return -ENOMEM;
-	return 0;
-}
-arch_initcall(fsl_lbc_init);
+struct fsl_lbc_ctrl *fsl_lbc_ctrl_dev;
+EXPORT_SYMBOL(fsl_lbc_ctrl_dev);
 
 /**
  * fsl_lbc_find - find Localbus bank
@@ -65,13 +45,15 @@
 int fsl_lbc_find(phys_addr_t addr_base)
 {
 	int i;
+	struct fsl_lbc_regs __iomem *lbc;
 
-	if (!fsl_lbc_regs)
+	if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
 		return -ENODEV;
 
-	for (i = 0; i < ARRAY_SIZE(fsl_lbc_regs->bank); i++) {
-		__be32 br = in_be32(&fsl_lbc_regs->bank[i].br);
-		__be32 or = in_be32(&fsl_lbc_regs->bank[i].or);
+	lbc = fsl_lbc_ctrl_dev->regs;
+	for (i = 0; i < ARRAY_SIZE(lbc->bank); i++) {
+		__be32 br = in_be32(&lbc->bank[i].br);
+		__be32 or = in_be32(&lbc->bank[i].or);
 
 		if (br & BR_V && (br & or & BR_BA) == addr_base)
 			return i;
@@ -94,22 +76,27 @@
 {
 	int bank;
 	__be32 br;
+	struct fsl_lbc_regs __iomem *lbc;
 
 	bank = fsl_lbc_find(addr_base);
 	if (bank < 0)
 		return bank;
 
-	br = in_be32(&fsl_lbc_regs->bank[bank].br);
+	if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
+		return -ENODEV;
+
+	lbc = fsl_lbc_ctrl_dev->regs;
+	br = in_be32(&lbc->bank[bank].br);
 
 	switch (br & BR_MSEL) {
 	case BR_MS_UPMA:
-		upm->mxmr = &fsl_lbc_regs->mamr;
+		upm->mxmr = &lbc->mamr;
 		break;
 	case BR_MS_UPMB:
-		upm->mxmr = &fsl_lbc_regs->mbmr;
+		upm->mxmr = &lbc->mbmr;
 		break;
 	case BR_MS_UPMC:
-		upm->mxmr = &fsl_lbc_regs->mcmr;
+		upm->mxmr = &lbc->mcmr;
 		break;
 	default:
 		return -EINVAL;
@@ -148,9 +135,12 @@
 	int ret = 0;
 	unsigned long flags;
 
+	if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
+		return -ENODEV;
+
 	spin_lock_irqsave(&fsl_lbc_lock, flags);
 
-	out_be32(&fsl_lbc_regs->mar, mar);
+	out_be32(&fsl_lbc_ctrl_dev->regs->mar, mar);
 
 	switch (upm->width) {
 	case 8:
@@ -172,3 +162,166 @@
 	return ret;
 }
 EXPORT_SYMBOL(fsl_upm_run_pattern);
+
+static int __devinit fsl_lbc_ctrl_init(struct fsl_lbc_ctrl *ctrl)
+{
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+
+	/* clear event registers */
+	setbits32(&lbc->ltesr, LTESR_CLEAR);
+	out_be32(&lbc->lteatr, 0);
+	out_be32(&lbc->ltear, 0);
+	out_be32(&lbc->lteccr, LTECCR_CLEAR);
+	out_be32(&lbc->ltedr, LTEDR_ENABLE);
+
+	/* Enable interrupts for any detected events */
+	out_be32(&lbc->lteir, LTEIR_ENABLE);
+
+	return 0;
+}
+
+/*
+ * NOTE: This interrupt is used to report localbus events of various kinds,
+ * such as transaction errors on the chipselects.
+ */
+
+static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data)
+{
+	struct fsl_lbc_ctrl *ctrl = data;
+	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+	u32 status;
+
+	status = in_be32(&lbc->ltesr);
+	if (!status)
+		return IRQ_NONE;
+
+	out_be32(&lbc->ltesr, LTESR_CLEAR);
+	out_be32(&lbc->lteatr, 0);
+	out_be32(&lbc->ltear, 0);
+	ctrl->irq_status = status;
+
+	if (status & LTESR_BM)
+		dev_err(ctrl->dev, "Local bus monitor time-out: "
+			"LTESR 0x%08X\n", status);
+	if (status & LTESR_WP)
+		dev_err(ctrl->dev, "Write protect error: "
+			"LTESR 0x%08X\n", status);
+	if (status & LTESR_ATMW)
+		dev_err(ctrl->dev, "Atomic write error: "
+			"LTESR 0x%08X\n", status);
+	if (status & LTESR_ATMR)
+		dev_err(ctrl->dev, "Atomic read error: "
+			"LTESR 0x%08X\n", status);
+	if (status & LTESR_CS)
+		dev_err(ctrl->dev, "Chip select error: "
+			"LTESR 0x%08X\n", status);
+	if (status & LTESR_UPM)
+		;
+	if (status & LTESR_FCT) {
+		dev_err(ctrl->dev, "FCM command time-out: "
+			"LTESR 0x%08X\n", status);
+		smp_wmb();
+		wake_up(&ctrl->irq_wait);
+	}
+	if (status & LTESR_PAR) {
+		dev_err(ctrl->dev, "Parity or Uncorrectable ECC error: "
+			"LTESR 0x%08X\n", status);
+		smp_wmb();
+		wake_up(&ctrl->irq_wait);
+	}
+	if (status & LTESR_CC) {
+		smp_wmb();
+		wake_up(&ctrl->irq_wait);
+	}
+	if (status & ~LTESR_MASK)
+		dev_err(ctrl->dev, "Unknown error: "
+			"LTESR 0x%08X\n", status);
+	return IRQ_HANDLED;
+}
+
+/*
+ * fsl_lbc_ctrl_probe
+ *
+ * called by device layer when it finds a device matching
+ * one our driver can handled. This code allocates all of
+ * the resources needed for the controller only.  The
+ * resources for the NAND banks themselves are allocated
+ * in the chip probe function.
+*/
+
+static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev)
+{
+	int ret;
+
+	if (!dev->dev.of_node) {
+		dev_err(&dev->dev, "Device OF-Node is NULL");
+		return -EFAULT;
+	}
+
+	fsl_lbc_ctrl_dev = kzalloc(sizeof(*fsl_lbc_ctrl_dev), GFP_KERNEL);
+	if (!fsl_lbc_ctrl_dev)
+		return -ENOMEM;
+
+	dev_set_drvdata(&dev->dev, fsl_lbc_ctrl_dev);
+
+	spin_lock_init(&fsl_lbc_ctrl_dev->lock);
+	init_waitqueue_head(&fsl_lbc_ctrl_dev->irq_wait);
+
+	fsl_lbc_ctrl_dev->regs = of_iomap(dev->dev.of_node, 0);
+	if (!fsl_lbc_ctrl_dev->regs) {
+		dev_err(&dev->dev, "failed to get memory region\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	fsl_lbc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
+	if (fsl_lbc_ctrl_dev->irq == NO_IRQ) {
+		dev_err(&dev->dev, "failed to get irq resource\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	fsl_lbc_ctrl_dev->dev = &dev->dev;
+
+	ret = fsl_lbc_ctrl_init(fsl_lbc_ctrl_dev);
+	if (ret < 0)
+		goto err;
+
+	ret = request_irq(fsl_lbc_ctrl_dev->irq, fsl_lbc_ctrl_irq, 0,
+				"fsl-lbc", fsl_lbc_ctrl_dev);
+	if (ret != 0) {
+		dev_err(&dev->dev, "failed to install irq (%d)\n",
+			fsl_lbc_ctrl_dev->irq);
+		ret = fsl_lbc_ctrl_dev->irq;
+		goto err;
+	}
+
+	return 0;
+
+err:
+	iounmap(fsl_lbc_ctrl_dev->regs);
+	kfree(fsl_lbc_ctrl_dev);
+	return ret;
+}
+
+static const struct of_device_id fsl_lbc_match[] = {
+	{ .compatible = "fsl,elbc", },
+	{ .compatible = "fsl,pq3-localbus", },
+	{ .compatible = "fsl,pq2-localbus", },
+	{ .compatible = "fsl,pq2pro-localbus", },
+	{},
+};
+
+static struct platform_driver fsl_lbc_ctrl_driver = {
+	.driver = {
+		.name = "fsl-lbc",
+		.of_match_table = fsl_lbc_match,
+	},
+	.probe = fsl_lbc_ctrl_probe,
+};
+
+static int __init fsl_lbc_init(void)
+{
+	return platform_driver_register(&fsl_lbc_ctrl_driver);
+}
+module_init(fsl_lbc_init);