Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/raspberrypi,pispbe.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Raspberry Pi PiSP Image Signal Processor (ISP) Back End

maintainers:
  - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
  - Jacopo Mondi <jacopo.mondi@ideasonboard.com>

description: |
  The Raspberry Pi PiSP Image Signal Processor (ISP) Back End is an image
  processor that fetches images in Bayer or Grayscale format from DRAM memory
  in tiles and produces images consumable by applications.

  The full ISP documentation is available at
  https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf

properties:
  compatible:
    items:
      - enum:
          - brcm,bcm2712-pispbe
      - const: raspberrypi,pispbe

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  clocks:
    maxItems: 1

  iommus:
    maxItems: 1

required:
  - compatible
  - reg
  - interrupts
  - clocks

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    soc {
        #address-cells = <2>;
        #size-cells = <2>;

        isp@880000  {
             compatible = "brcm,bcm2712-pispbe", "raspberrypi,pispbe";
             reg = <0x10 0x00880000 0x0 0x4000>;
             interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
             clocks = <&firmware_clocks 7>;
             iommus = <&iommu2>;
        };
    };