| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz> |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| |
| #include "ccu_common.h" |
| #include "ccu_reset.h" |
| |
| #include "ccu_div.h" |
| #include "ccu_gate.h" |
| #include "ccu_mp.h" |
| #include "ccu_nm.h" |
| |
| #include "ccu-sun50i-h6-r.h" |
| |
| /* |
| * Information about AR100 and AHB/APB clocks in R_CCU are gathered from |
| * clock definitions in the BSP source code. |
| */ |
| |
| static const char * const ar100_r_apb2_parents[] = { "osc24M", "osc32k", |
| "iosc", "pll-periph0" }; |
| static const struct ccu_mux_var_prediv ar100_r_apb2_predivs[] = { |
| { .index = 3, .shift = 0, .width = 5 }, |
| }; |
| |
| static struct ccu_div ar100_clk = { |
| .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), |
| |
| .mux = { |
| .shift = 24, |
| .width = 2, |
| |
| .var_predivs = ar100_r_apb2_predivs, |
| .n_var_predivs = ARRAY_SIZE(ar100_r_apb2_predivs), |
| }, |
| |
| .common = { |
| .reg = 0x000, |
| .features = CCU_FEATURE_VARIABLE_PREDIV, |
| .hw.init = CLK_HW_INIT_PARENTS("ar100", |
| ar100_r_apb2_parents, |
| &ccu_div_ops, |
| 0), |
| }, |
| }; |
| |
| static CLK_FIXED_FACTOR_HW(r_ahb_clk, "r-ahb", &ar100_clk.common.hw, 1, 1, 0); |
| |
| static SUNXI_CCU_M(r_apb1_clk, "r-apb1", "r-ahb", 0x00c, 0, 2, 0); |
| |
| static struct ccu_div r_apb2_clk = { |
| .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), |
| |
| .mux = { |
| .shift = 24, |
| .width = 2, |
| |
| .var_predivs = ar100_r_apb2_predivs, |
| .n_var_predivs = ARRAY_SIZE(ar100_r_apb2_predivs), |
| }, |
| |
| .common = { |
| .reg = 0x010, |
| .features = CCU_FEATURE_VARIABLE_PREDIV, |
| .hw.init = CLK_HW_INIT_PARENTS("r-apb2", |
| ar100_r_apb2_parents, |
| &ccu_div_ops, |
| 0), |
| }, |
| }; |
| |
| /* |
| * Information about the gate/resets are gathered from the clock header file |
| * in the BSP source code, although most of them are unused. The existence |
| * of the hardware block is verified with "3.1 Memory Mapping" chapter in |
| * "Allwinner H6 V200 User Manual V1.1"; and the parent APB buses are verified |
| * with "3.3.2.1 System Bus Tree" chapter inthe same document. |
| */ |
| static SUNXI_CCU_GATE(r_apb1_timer_clk, "r-apb1-timer", "r-apb1", |
| 0x11c, BIT(0), 0); |
| static SUNXI_CCU_GATE(r_apb1_twd_clk, "r-apb1-twd", "r-apb1", |
| 0x12c, BIT(0), 0); |
| static SUNXI_CCU_GATE(r_apb1_pwm_clk, "r-apb1-pwm", "r-apb1", |
| 0x13c, BIT(0), 0); |
| static SUNXI_CCU_GATE(r_apb2_uart_clk, "r-apb2-uart", "r-apb2", |
| 0x18c, BIT(0), 0); |
| static SUNXI_CCU_GATE(r_apb2_i2c_clk, "r-apb2-i2c", "r-apb2", |
| 0x19c, BIT(0), 0); |
| static SUNXI_CCU_GATE(r_apb2_rsb_clk, "r-apb2-rsb", "r-apb2", |
| 0x1bc, BIT(0), 0); |
| static SUNXI_CCU_GATE(r_apb1_ir_clk, "r-apb1-ir", "r-apb1", |
| 0x1cc, BIT(0), 0); |
| static SUNXI_CCU_GATE(r_apb1_w1_clk, "r-apb1-w1", "r-apb1", |
| 0x1ec, BIT(0), 0); |
| static SUNXI_CCU_GATE(r_apb1_rtc_clk, "r-apb1-rtc", "r-apb1", |
| 0x20c, BIT(0), CLK_IGNORE_UNUSED); |
| |
| /* Information of IR(RX) mod clock is gathered from BSP source code */ |
| static const char * const r_mod0_default_parents[] = { "osc32k", "osc24M" }; |
| static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir", |
| r_mod0_default_parents, 0x1c0, |
| 0, 5, /* M */ |
| 8, 2, /* P */ |
| 24, 1, /* mux */ |
| BIT(31), /* gate */ |
| 0); |
| |
| /* |
| * BSP didn't use the 1-wire function at all now, and the information about |
| * this mod clock is guessed from the IR mod clock above. The existence of |
| * this mod clock is proven by BSP clock header, and the dividers are verified |
| * by contents in the 1-wire related chapter of the User Manual. |
| */ |
| |
| static SUNXI_CCU_MP_WITH_MUX_GATE(w1_clk, "w1", |
| r_mod0_default_parents, 0x1e0, |
| 0, 5, /* M */ |
| 8, 2, /* P */ |
| 24, 1, /* mux */ |
| BIT(31), /* gate */ |
| 0); |
| |
| static struct ccu_common *sun50i_h6_r_ccu_clks[] = { |
| &ar100_clk.common, |
| &r_apb1_clk.common, |
| &r_apb2_clk.common, |
| &r_apb1_timer_clk.common, |
| &r_apb1_twd_clk.common, |
| &r_apb1_pwm_clk.common, |
| &r_apb2_uart_clk.common, |
| &r_apb2_i2c_clk.common, |
| &r_apb2_rsb_clk.common, |
| &r_apb1_ir_clk.common, |
| &r_apb1_w1_clk.common, |
| &r_apb1_rtc_clk.common, |
| &ir_clk.common, |
| &w1_clk.common, |
| }; |
| |
| static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = { |
| .hws = { |
| [CLK_AR100] = &ar100_clk.common.hw, |
| [CLK_R_AHB] = &r_ahb_clk.hw, |
| [CLK_R_APB1] = &r_apb1_clk.common.hw, |
| [CLK_R_APB2] = &r_apb2_clk.common.hw, |
| [CLK_R_APB1_TIMER] = &r_apb1_timer_clk.common.hw, |
| [CLK_R_APB1_TWD] = &r_apb1_twd_clk.common.hw, |
| [CLK_R_APB1_PWM] = &r_apb1_pwm_clk.common.hw, |
| [CLK_R_APB2_UART] = &r_apb2_uart_clk.common.hw, |
| [CLK_R_APB2_I2C] = &r_apb2_i2c_clk.common.hw, |
| [CLK_R_APB2_RSB] = &r_apb2_rsb_clk.common.hw, |
| [CLK_R_APB1_IR] = &r_apb1_ir_clk.common.hw, |
| [CLK_R_APB1_W1] = &r_apb1_w1_clk.common.hw, |
| [CLK_R_APB1_RTC] = &r_apb1_rtc_clk.common.hw, |
| [CLK_IR] = &ir_clk.common.hw, |
| [CLK_W1] = &w1_clk.common.hw, |
| }, |
| .num = CLK_NUMBER, |
| }; |
| |
| static struct clk_hw_onecell_data sun50i_h616_r_hw_clks = { |
| .hws = { |
| [CLK_R_AHB] = &r_ahb_clk.hw, |
| [CLK_R_APB1] = &r_apb1_clk.common.hw, |
| [CLK_R_APB2] = &r_apb2_clk.common.hw, |
| [CLK_R_APB1_TWD] = &r_apb1_twd_clk.common.hw, |
| [CLK_R_APB2_I2C] = &r_apb2_i2c_clk.common.hw, |
| [CLK_R_APB2_RSB] = &r_apb2_rsb_clk.common.hw, |
| [CLK_R_APB1_IR] = &r_apb1_ir_clk.common.hw, |
| [CLK_R_APB1_RTC] = &r_apb1_rtc_clk.common.hw, |
| [CLK_IR] = &ir_clk.common.hw, |
| }, |
| .num = CLK_NUMBER, |
| }; |
| |
| static struct ccu_reset_map sun50i_h6_r_ccu_resets[] = { |
| [RST_R_APB1_TIMER] = { 0x11c, BIT(16) }, |
| [RST_R_APB1_TWD] = { 0x12c, BIT(16) }, |
| [RST_R_APB1_PWM] = { 0x13c, BIT(16) }, |
| [RST_R_APB2_UART] = { 0x18c, BIT(16) }, |
| [RST_R_APB2_I2C] = { 0x19c, BIT(16) }, |
| [RST_R_APB2_RSB] = { 0x1bc, BIT(16) }, |
| [RST_R_APB1_IR] = { 0x1cc, BIT(16) }, |
| [RST_R_APB1_W1] = { 0x1ec, BIT(16) }, |
| }; |
| |
| static struct ccu_reset_map sun50i_h616_r_ccu_resets[] = { |
| [RST_R_APB1_TWD] = { 0x12c, BIT(16) }, |
| [RST_R_APB2_I2C] = { 0x19c, BIT(16) }, |
| [RST_R_APB2_RSB] = { 0x1bc, BIT(16) }, |
| [RST_R_APB1_IR] = { 0x1cc, BIT(16) }, |
| }; |
| |
| static const struct sunxi_ccu_desc sun50i_h6_r_ccu_desc = { |
| .ccu_clks = sun50i_h6_r_ccu_clks, |
| .num_ccu_clks = ARRAY_SIZE(sun50i_h6_r_ccu_clks), |
| |
| .hw_clks = &sun50i_h6_r_hw_clks, |
| |
| .resets = sun50i_h6_r_ccu_resets, |
| .num_resets = ARRAY_SIZE(sun50i_h6_r_ccu_resets), |
| }; |
| |
| static const struct sunxi_ccu_desc sun50i_h616_r_ccu_desc = { |
| .ccu_clks = sun50i_h6_r_ccu_clks, |
| .num_ccu_clks = ARRAY_SIZE(sun50i_h6_r_ccu_clks), |
| |
| .hw_clks = &sun50i_h616_r_hw_clks, |
| |
| .resets = sun50i_h616_r_ccu_resets, |
| .num_resets = ARRAY_SIZE(sun50i_h616_r_ccu_resets), |
| }; |
| |
| static int sun50i_h6_r_ccu_probe(struct platform_device *pdev) |
| { |
| const struct sunxi_ccu_desc *desc; |
| void __iomem *reg; |
| |
| desc = of_device_get_match_data(&pdev->dev); |
| if (!desc) |
| return -EINVAL; |
| |
| reg = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(reg)) |
| return PTR_ERR(reg); |
| |
| return devm_sunxi_ccu_probe(&pdev->dev, reg, desc); |
| } |
| |
| static const struct of_device_id sun50i_h6_r_ccu_ids[] = { |
| { |
| .compatible = "allwinner,sun50i-h6-r-ccu", |
| .data = &sun50i_h6_r_ccu_desc, |
| }, |
| { |
| .compatible = "allwinner,sun50i-h616-r-ccu", |
| .data = &sun50i_h616_r_ccu_desc, |
| }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, sun50i_h6_r_ccu_ids); |
| |
| static struct platform_driver sun50i_h6_r_ccu_driver = { |
| .probe = sun50i_h6_r_ccu_probe, |
| .driver = { |
| .name = "sun50i-h6-r-ccu", |
| .suppress_bind_attrs = true, |
| .of_match_table = sun50i_h6_r_ccu_ids, |
| }, |
| }; |
| module_platform_driver(sun50i_h6_r_ccu_driver); |
| |
| MODULE_IMPORT_NS(SUNXI_CCU); |
| MODULE_DESCRIPTION("Support for the Allwinner H6 and H616 PRCM CCU"); |
| MODULE_LICENSE("GPL"); |