| // SPDX-License-Identifier: GPL-2.0-only |
| // Copyright(c) 2017-2019 Intel Corporation. |
| |
| #include <linux/cleanup.h> |
| #include <linux/device.h> |
| #include <linux/debugfs.h> |
| #include <linux/firmware.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/slab.h> |
| #include <linux/soundwire/sdw.h> |
| #include <linux/soundwire/sdw_registers.h> |
| #include "bus.h" |
| |
| static struct dentry *sdw_debugfs_root; |
| |
| void sdw_bus_debugfs_init(struct sdw_bus *bus) |
| { |
| char name[16]; |
| |
| if (!sdw_debugfs_root) |
| return; |
| |
| /* create the debugfs master-N */ |
| snprintf(name, sizeof(name), "master-%d-%d", bus->controller_id, bus->link_id); |
| bus->debugfs = debugfs_create_dir(name, sdw_debugfs_root); |
| } |
| |
| void sdw_bus_debugfs_exit(struct sdw_bus *bus) |
| { |
| debugfs_remove_recursive(bus->debugfs); |
| } |
| |
| #define RD_BUF (3 * PAGE_SIZE) |
| |
| static ssize_t sdw_sprintf(struct sdw_slave *slave, |
| char *buf, size_t pos, unsigned int reg) |
| { |
| int value; |
| |
| value = sdw_read_no_pm(slave, reg); |
| |
| if (value < 0) |
| return scnprintf(buf + pos, RD_BUF - pos, "%3x\tXX\n", reg); |
| else |
| return scnprintf(buf + pos, RD_BUF - pos, |
| "%3x\t%2x\n", reg, value); |
| } |
| |
| static int sdw_slave_reg_show(struct seq_file *s_file, void *data) |
| { |
| struct sdw_slave *slave = s_file->private; |
| ssize_t ret; |
| int i, j; |
| |
| char *buf __free(kfree) = kzalloc(RD_BUF, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| ret = pm_runtime_get_sync(&slave->dev); |
| if (ret < 0 && ret != -EACCES) { |
| pm_runtime_put_noidle(&slave->dev); |
| return ret; |
| } |
| |
| ret = scnprintf(buf, RD_BUF, "Register Value\n"); |
| |
| /* DP0 non-banked registers */ |
| ret += scnprintf(buf + ret, RD_BUF - ret, "\nDP0\n"); |
| for (i = SDW_DP0_INT; i <= SDW_DP0_PREPARECTRL; i++) |
| ret += sdw_sprintf(slave, buf, ret, i); |
| |
| /* DP0 Bank 0 registers */ |
| ret += scnprintf(buf + ret, RD_BUF - ret, "Bank0\n"); |
| ret += sdw_sprintf(slave, buf, ret, SDW_DP0_CHANNELEN); |
| for (i = SDW_DP0_SAMPLECTRL1; i <= SDW_DP0_LANECTRL; i++) |
| ret += sdw_sprintf(slave, buf, ret, i); |
| |
| /* DP0 Bank 1 registers */ |
| ret += scnprintf(buf + ret, RD_BUF - ret, "Bank1\n"); |
| ret += sdw_sprintf(slave, buf, ret, |
| SDW_DP0_CHANNELEN + SDW_BANK1_OFFSET); |
| for (i = SDW_DP0_SAMPLECTRL1 + SDW_BANK1_OFFSET; |
| i <= SDW_DP0_LANECTRL + SDW_BANK1_OFFSET; i++) |
| ret += sdw_sprintf(slave, buf, ret, i); |
| |
| /* SCP registers */ |
| ret += scnprintf(buf + ret, RD_BUF - ret, "\nSCP\n"); |
| for (i = SDW_SCP_INT1; i <= SDW_SCP_BUS_CLOCK_BASE; i++) |
| ret += sdw_sprintf(slave, buf, ret, i); |
| for (i = SDW_SCP_DEVID_0; i <= SDW_SCP_DEVID_5; i++) |
| ret += sdw_sprintf(slave, buf, ret, i); |
| for (i = SDW_SCP_FRAMECTRL_B0; i <= SDW_SCP_BUSCLOCK_SCALE_B0; i++) |
| ret += sdw_sprintf(slave, buf, ret, i); |
| for (i = SDW_SCP_FRAMECTRL_B1; i <= SDW_SCP_BUSCLOCK_SCALE_B1; i++) |
| ret += sdw_sprintf(slave, buf, ret, i); |
| for (i = SDW_SCP_PHY_OUT_CTRL_0; i <= SDW_SCP_PHY_OUT_CTRL_7; i++) |
| ret += sdw_sprintf(slave, buf, ret, i); |
| |
| |
| /* |
| * SCP Bank 0/1 registers are read-only and cannot be |
| * retrieved from the Slave. The Master typically keeps track |
| * of the current frame size so the information can be found |
| * in other places |
| */ |
| |
| /* DP1..14 registers */ |
| for (i = 1; SDW_VALID_PORT_RANGE(i); i++) { |
| |
| /* DPi registers */ |
| ret += scnprintf(buf + ret, RD_BUF - ret, "\nDP%d\n", i); |
| for (j = SDW_DPN_INT(i); j <= SDW_DPN_PREPARECTRL(i); j++) |
| ret += sdw_sprintf(slave, buf, ret, j); |
| |
| /* DPi Bank0 registers */ |
| ret += scnprintf(buf + ret, RD_BUF - ret, "Bank0\n"); |
| for (j = SDW_DPN_CHANNELEN_B0(i); |
| j <= SDW_DPN_LANECTRL_B0(i); j++) |
| ret += sdw_sprintf(slave, buf, ret, j); |
| |
| /* DPi Bank1 registers */ |
| ret += scnprintf(buf + ret, RD_BUF - ret, "Bank1\n"); |
| for (j = SDW_DPN_CHANNELEN_B1(i); |
| j <= SDW_DPN_LANECTRL_B1(i); j++) |
| ret += sdw_sprintf(slave, buf, ret, j); |
| } |
| |
| seq_printf(s_file, "%s", buf); |
| |
| pm_runtime_mark_last_busy(&slave->dev); |
| pm_runtime_put(&slave->dev); |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(sdw_slave_reg); |
| |
| #define MAX_CMD_BYTES 256 |
| |
| static int cmd; |
| static u32 start_addr; |
| static size_t num_bytes; |
| static u8 read_buffer[MAX_CMD_BYTES]; |
| static char *firmware_file; |
| |
| static int set_command(void *data, u64 value) |
| { |
| struct sdw_slave *slave = data; |
| |
| if (value > 1) |
| return -EINVAL; |
| |
| /* Userspace changed the hardware state behind the kernel's back */ |
| add_taint(TAINT_USER, LOCKDEP_STILL_OK); |
| |
| dev_dbg(&slave->dev, "command: %s\n", value ? "read" : "write"); |
| cmd = value; |
| |
| return 0; |
| } |
| DEFINE_DEBUGFS_ATTRIBUTE(set_command_fops, NULL, |
| set_command, "%llu\n"); |
| |
| static int set_start_address(void *data, u64 value) |
| { |
| struct sdw_slave *slave = data; |
| |
| /* Userspace changed the hardware state behind the kernel's back */ |
| add_taint(TAINT_USER, LOCKDEP_STILL_OK); |
| |
| dev_dbg(&slave->dev, "start address %#llx\n", value); |
| |
| start_addr = value; |
| |
| return 0; |
| } |
| DEFINE_DEBUGFS_ATTRIBUTE(set_start_address_fops, NULL, |
| set_start_address, "%llu\n"); |
| |
| static int set_num_bytes(void *data, u64 value) |
| { |
| struct sdw_slave *slave = data; |
| |
| if (value == 0 || value > MAX_CMD_BYTES) |
| return -EINVAL; |
| |
| /* Userspace changed the hardware state behind the kernel's back */ |
| add_taint(TAINT_USER, LOCKDEP_STILL_OK); |
| |
| dev_dbg(&slave->dev, "number of bytes %lld\n", value); |
| |
| num_bytes = value; |
| |
| return 0; |
| } |
| DEFINE_DEBUGFS_ATTRIBUTE(set_num_bytes_fops, NULL, |
| set_num_bytes, "%llu\n"); |
| |
| static int cmd_go(void *data, u64 value) |
| { |
| struct sdw_slave *slave = data; |
| int ret; |
| |
| if (value != 1) |
| return -EINVAL; |
| |
| /* one last check */ |
| if (start_addr > SDW_REG_MAX || |
| num_bytes == 0 || num_bytes > MAX_CMD_BYTES) |
| return -EINVAL; |
| |
| ret = pm_runtime_get_sync(&slave->dev); |
| if (ret < 0 && ret != -EACCES) { |
| pm_runtime_put_noidle(&slave->dev); |
| return ret; |
| } |
| |
| /* Userspace changed the hardware state behind the kernel's back */ |
| add_taint(TAINT_USER, LOCKDEP_STILL_OK); |
| |
| dev_dbg(&slave->dev, "starting command\n"); |
| |
| if (cmd == 0) { |
| const struct firmware *fw; |
| |
| ret = request_firmware(&fw, firmware_file, &slave->dev); |
| if (ret < 0) { |
| dev_err(&slave->dev, "firmware %s not found\n", firmware_file); |
| goto out; |
| } |
| |
| if (fw->size != num_bytes) { |
| dev_err(&slave->dev, |
| "firmware %s: unexpected size %zd, desired %zd\n", |
| firmware_file, fw->size, num_bytes); |
| release_firmware(fw); |
| goto out; |
| } |
| |
| ret = sdw_nwrite_no_pm(slave, start_addr, num_bytes, fw->data); |
| release_firmware(fw); |
| } else { |
| ret = sdw_nread_no_pm(slave, start_addr, num_bytes, read_buffer); |
| } |
| |
| dev_dbg(&slave->dev, "command completed %d\n", ret); |
| |
| out: |
| pm_runtime_mark_last_busy(&slave->dev); |
| pm_runtime_put(&slave->dev); |
| |
| return ret; |
| } |
| DEFINE_DEBUGFS_ATTRIBUTE(cmd_go_fops, NULL, |
| cmd_go, "%llu\n"); |
| |
| #define MAX_LINE_LEN 128 |
| |
| static int read_buffer_show(struct seq_file *s_file, void *data) |
| { |
| char buf[MAX_LINE_LEN]; |
| int i; |
| |
| if (num_bytes == 0 || num_bytes > MAX_CMD_BYTES) |
| return -EINVAL; |
| |
| for (i = 0; i < num_bytes; i++) { |
| scnprintf(buf, MAX_LINE_LEN, "address %#x val 0x%02x\n", |
| start_addr + i, read_buffer[i]); |
| seq_printf(s_file, "%s", buf); |
| } |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(read_buffer); |
| |
| void sdw_slave_debugfs_init(struct sdw_slave *slave) |
| { |
| struct dentry *master; |
| struct dentry *d; |
| char name[32]; |
| |
| master = slave->bus->debugfs; |
| |
| /* create the debugfs slave-name */ |
| snprintf(name, sizeof(name), "%s", dev_name(&slave->dev)); |
| d = debugfs_create_dir(name, master); |
| |
| debugfs_create_file("registers", 0400, d, slave, &sdw_slave_reg_fops); |
| |
| /* interface to send arbitrary commands */ |
| debugfs_create_file("command", 0200, d, slave, &set_command_fops); |
| debugfs_create_file("start_address", 0200, d, slave, &set_start_address_fops); |
| debugfs_create_file("num_bytes", 0200, d, slave, &set_num_bytes_fops); |
| debugfs_create_file("go", 0200, d, slave, &cmd_go_fops); |
| |
| debugfs_create_file("read_buffer", 0400, d, slave, &read_buffer_fops); |
| firmware_file = NULL; |
| debugfs_create_str("firmware_file", 0200, d, &firmware_file); |
| |
| slave->debugfs = d; |
| } |
| |
| void sdw_slave_debugfs_exit(struct sdw_slave *slave) |
| { |
| debugfs_remove_recursive(slave->debugfs); |
| } |
| |
| void sdw_debugfs_init(void) |
| { |
| sdw_debugfs_root = debugfs_create_dir("soundwire", NULL); |
| } |
| |
| void sdw_debugfs_exit(void) |
| { |
| debugfs_remove_recursive(sdw_debugfs_root); |
| } |