blob: 9663b1a33bd482aa975ffa6a3559a5156de8ff88 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2021 Google LLC
*
* Authors: Elena Petrova <lenaptr@google.com>,
* Eric Biggers <ebiggers@google.com>
*
* Self-tests of fips140.ko cryptographic functionality. These are run at
* module load time to fulfill FIPS 140 and NIAP FPT_TST_EXT.1 requirements.
*
* The actual requirements for these self-tests are somewhat vague, but
* section 9 ("Self-Tests") of the FIPS 140-2 Implementation Guidance document
* (https://csrc.nist.gov/csrc/media/projects/cryptographic-module-validation-program/documents/fips140-2/fips1402ig.pdf)
* is somewhat helpful. Basically, all implementations of all FIPS approved
* algorithms (including modes of operation) must be tested. However:
*
* - There are provisions for skipping tests that are already sufficiently
* covered by other tests. E.g., HMAC-SHA256 may cover SHA-256.
*
* - Only one test vector is required per algorithm, and it can be generated
* by any known-good implementation or taken from any official document.
*
* - For ciphers, both encryption and decryption must be tested.
*
* - Only one key size per algorithm needs to be tested.
*
* There is some ambiguity about whether all implementations of each algorithm
* must be tested, or whether it is sufficient to test just the highest priority
* implementation. To be safe we test all implementations, except ones that can
* be excluded by one of the rules above.
*
* See fips140_selftests[] for the list of tests we've selected. Currently, all
* our test vectors except the AES-CBC-CTS and DRBG ones were generated by the
* script tools/crypto/gen_fips140_testvecs.py, using the known-good
* implementations in the Python packages hashlib, pycryptodome, and
* cryptography.
*
* Note that we don't reuse the upstream crypto API's self-tests
* (crypto/testmgr.{c,h}), for several reasons:
*
* - To meet FIPS requirements, the self-tests must be located within the FIPS
* module boundary (fips140.ko). But testmgr is integrated into the crypto
* API framework and can't be extracted into the module.
*
* - testmgr is much more heavyweight than required for FIPS and NIAP; it
* tests more algorithms and does more tests per algorithm, as it's meant to
* do proper testing and not just meet certification requirements. We need
* tests that can run with minimal overhead on every boot-up.
*
* - Despite being more heavyweight in general, testmgr doesn't test the
* SHA-256 and AES library APIs, despite that being needed here.
*/
#include <crypto/aead.h>
#include <crypto/aes.h>
#include <crypto/drbg.h>
#include <crypto/hash.h>
#include <crypto/rng.h>
#include <crypto/sha2.h>
#include <crypto/skcipher.h>
#include "fips140-module.h"
/* Test vector for an AEAD algorithm */
struct aead_testvec {
const u8 *key;
size_t key_size;
const u8 *iv;
size_t iv_size;
const u8 *assoc;
size_t assoc_size;
const u8 *plaintext;
size_t plaintext_size;
const u8 *ciphertext;
size_t ciphertext_size;
};
/* Test vector for a length-preserving encryption algorithm */
struct skcipher_testvec {
const u8 *key;
size_t key_size;
const u8 *iv;
size_t iv_size;
const u8 *plaintext;
const u8 *ciphertext;
size_t message_size;
};
/* Test vector for a hash algorithm */
struct hash_testvec {
const u8 *key;
size_t key_size;
const u8 *message;
size_t message_size;
const u8 *digest;
size_t digest_size;
};
/* Test vector for a DRBG algorithm */
struct drbg_testvec {
const u8 *entropy;
size_t entropy_size;
const u8 *pers;
size_t pers_size;
const u8 *entpr_a;
const u8 *entpr_b;
size_t entpr_size;
const u8 *add_a;
const u8 *add_b;
size_t add_size;
const u8 *output;
size_t out_size;
};
struct fips_test {
/* The name of the algorithm, in crypto API syntax */
const char *alg;
/*
* The optional list of implementations to test. @func will be called
* once per implementation, or once with @alg if this list is empty.
* The implementation names must be given in crypto API syntax, or in
* the case of a library implementation should have "-lib" appended.
*/
const char *impls[8];
/*
* The test function. It should execute a known-answer test on an
* algorithm implementation, using the below test vector.
*/
int __must_check (*func)(const struct fips_test *test,
const char *impl);
/* The test vector, with a format specific to the type of algorithm */
union {
struct aead_testvec aead;
struct skcipher_testvec skcipher;
struct hash_testvec hash;
struct drbg_testvec drbg;
};
};
/* Maximum IV size (in bytes) among any algorithm tested here */
#define MAX_IV_SIZE 16
static int __init __must_check
fips_check_result(u8 *result, const u8 *expected_result, size_t result_size,
const char *impl, const char *operation)
{
fips140_inject_selftest_failure(impl, result);
if (memcmp(result, expected_result, result_size) != 0) {
pr_err("wrong result from %s %s\n", impl, operation);
return -EBADMSG;
}
return 0;
}
/*
* None of the algorithms should be ASYNC, as the FIPS module doesn't register
* any ASYNC algorithms. (The ASYNC flag is only declared by hardware
* algorithms, which would need their own FIPS certification.)
*
* Ideally we would verify alg->cra_module == THIS_MODULE here as well, but that
* doesn't work because the files are compiled as built-in code.
*/
static int __init __must_check
fips_validate_alg(const struct crypto_alg *alg)
{
if (alg->cra_flags & CRYPTO_ALG_ASYNC) {
pr_err("unexpectedly got async implementation of %s (%s)\n",
alg->cra_name, alg->cra_driver_name);
return -EINVAL;
}
return 0;
}
static int __init __must_check
fips_handle_alloc_tfm_error(const char *impl, int err)
{
if (err == -ENOENT) {
/*
* The requested implementation of the algorithm wasn't found.
* This is expected if the CPU lacks a feature the
* implementation needs, such as the ARMv8 Crypto Extensions.
*
* When this happens, the implementation isn't available for
* use, so we can't test it, nor do we need to. So we just skip
* the test.
*/
pr_info("%s is unavailable (no CPU support?), skipping testing it\n",
impl);
return 0;
}
pr_err("failed to allocate %s tfm: %d\n", impl, err);
return err;
}
static int __init __must_check
fips_test_aes_library(const struct fips_test *test, const char *impl)
{
const struct skcipher_testvec *vec = &test->skcipher;
struct crypto_aes_ctx ctx;
u8 block[AES_BLOCK_SIZE];
int err;
if (WARN_ON(vec->message_size != AES_BLOCK_SIZE))
return -EINVAL;
err = aes_expandkey(&ctx, vec->key, vec->key_size);
if (err) {
pr_err("aes_expandkey() failed: %d\n", err);
return err;
}
aes_encrypt(&ctx, block, vec->plaintext);
err = fips_check_result(block, vec->ciphertext, AES_BLOCK_SIZE,
impl, "encryption");
if (err)
return err;
aes_decrypt(&ctx, block, block);
return fips_check_result(block, vec->plaintext, AES_BLOCK_SIZE,
impl, "decryption");
}
/* Test a length-preserving symmetric cipher using the crypto_skcipher API. */
static int __init __must_check
fips_test_skcipher(const struct fips_test *test, const char *impl)
{
const struct skcipher_testvec *vec = &test->skcipher;
struct crypto_skcipher *tfm;
struct skcipher_request *req = NULL;
u8 *message = NULL;
struct scatterlist sg;
u8 iv[MAX_IV_SIZE];
int err;
if (WARN_ON(vec->iv_size > MAX_IV_SIZE))
return -EINVAL;
if (WARN_ON(vec->message_size <= 0))
return -EINVAL;
tfm = crypto_alloc_skcipher(impl, 0, 0);
if (IS_ERR(tfm))
return fips_handle_alloc_tfm_error(impl, PTR_ERR(tfm));
err = fips_validate_alg(&crypto_skcipher_alg(tfm)->base);
if (err)
goto out;
if (crypto_skcipher_ivsize(tfm) != vec->iv_size) {
pr_err("%s has wrong IV size\n", impl);
err = -EINVAL;
goto out;
}
req = skcipher_request_alloc(tfm, GFP_KERNEL);
message = kmemdup(vec->plaintext, vec->message_size, GFP_KERNEL);
if (!req || !message) {
err = -ENOMEM;
goto out;
}
sg_init_one(&sg, message, vec->message_size);
skcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_SLEEP,
NULL, NULL);
skcipher_request_set_crypt(req, &sg, &sg, vec->message_size, iv);
err = crypto_skcipher_setkey(tfm, vec->key, vec->key_size);
if (err) {
pr_err("failed to set %s key: %d\n", impl, err);
goto out;
}
/* Encrypt the plaintext, then verify the resulting ciphertext. */
memcpy(iv, vec->iv, vec->iv_size);
err = crypto_skcipher_encrypt(req);
if (err) {
pr_err("%s encryption failed: %d\n", impl, err);
goto out;
}
err = fips_check_result(message, vec->ciphertext, vec->message_size,
impl, "encryption");
if (err)
goto out;
/* Decrypt the ciphertext, then verify the resulting plaintext. */
memcpy(iv, vec->iv, vec->iv_size);
err = crypto_skcipher_decrypt(req);
if (err) {
pr_err("%s decryption failed: %d\n", impl, err);
goto out;
}
err = fips_check_result(message, vec->plaintext, vec->message_size,
impl, "decryption");
out:
kfree(message);
skcipher_request_free(req);
crypto_free_skcipher(tfm);
return err;
}
/* Test an AEAD using the crypto_aead API. */
static int __init __must_check
fips_test_aead(const struct fips_test *test, const char *impl)
{
const struct aead_testvec *vec = &test->aead;
const int tag_size = vec->ciphertext_size - vec->plaintext_size;
struct crypto_aead *tfm;
struct aead_request *req = NULL;
u8 *assoc = NULL;
u8 *message = NULL;
struct scatterlist sg[2];
int sg_idx = 0;
u8 iv[MAX_IV_SIZE];
int err;
if (WARN_ON(vec->iv_size > MAX_IV_SIZE))
return -EINVAL;
if (WARN_ON(vec->ciphertext_size <= vec->plaintext_size))
return -EINVAL;
tfm = crypto_alloc_aead(impl, 0, 0);
if (IS_ERR(tfm))
return fips_handle_alloc_tfm_error(impl, PTR_ERR(tfm));
err = fips_validate_alg(&crypto_aead_alg(tfm)->base);
if (err)
goto out;
if (crypto_aead_ivsize(tfm) != vec->iv_size) {
pr_err("%s has wrong IV size\n", impl);
err = -EINVAL;
goto out;
}
req = aead_request_alloc(tfm, GFP_KERNEL);
assoc = kmemdup(vec->assoc, vec->assoc_size, GFP_KERNEL);
message = kzalloc(vec->ciphertext_size, GFP_KERNEL);
if (!req || !assoc || !message) {
err = -ENOMEM;
goto out;
}
memcpy(message, vec->plaintext, vec->plaintext_size);
sg_init_table(sg, ARRAY_SIZE(sg));
if (vec->assoc_size)
sg_set_buf(&sg[sg_idx++], assoc, vec->assoc_size);
sg_set_buf(&sg[sg_idx++], message, vec->ciphertext_size);
aead_request_set_ad(req, vec->assoc_size);
aead_request_set_callback(req, CRYPTO_TFM_REQ_MAY_SLEEP, NULL, NULL);
err = crypto_aead_setkey(tfm, vec->key, vec->key_size);
if (err) {
pr_err("failed to set %s key: %d\n", impl, err);
goto out;
}
err = crypto_aead_setauthsize(tfm, tag_size);
if (err) {
pr_err("failed to set %s authentication tag size: %d\n",
impl, err);
goto out;
}
/*
* Encrypt the plaintext, then verify the resulting ciphertext (which
* includes the authentication tag).
*/
memcpy(iv, vec->iv, vec->iv_size);
aead_request_set_crypt(req, sg, sg, vec->plaintext_size, iv);
err = crypto_aead_encrypt(req);
if (err) {
pr_err("%s encryption failed: %d\n", impl, err);
goto out;
}
err = fips_check_result(message, vec->ciphertext, vec->ciphertext_size,
impl, "encryption");
if (err)
goto out;
/*
* Decrypt the ciphertext (which includes the authentication tag), then
* verify the resulting plaintext.
*/
memcpy(iv, vec->iv, vec->iv_size);
aead_request_set_crypt(req, sg, sg, vec->ciphertext_size, iv);
err = crypto_aead_decrypt(req);
if (err) {
pr_err("%s decryption failed: %d\n", impl, err);
goto out;
}
err = fips_check_result(message, vec->plaintext, vec->plaintext_size,
impl, "decryption");
out:
kfree(message);
kfree(assoc);
aead_request_free(req);
crypto_free_aead(tfm);
return err;
}
/*
* Test a hash algorithm using the crypto_shash API.
*
* Note that we don't need to test the crypto_ahash API too, since none of the
* hash algorithms in the FIPS module have the ASYNC flag, and thus there will
* be no hash algorithms that can be accessed only through crypto_ahash.
*/
static int __init __must_check
fips_test_hash(const struct fips_test *test, const char *impl)
{
const struct hash_testvec *vec = &test->hash;
struct crypto_shash *tfm;
u8 digest[HASH_MAX_DIGESTSIZE];
int err;
if (WARN_ON(vec->digest_size > HASH_MAX_DIGESTSIZE))
return -EINVAL;
tfm = crypto_alloc_shash(impl, 0, 0);
if (IS_ERR(tfm))
return fips_handle_alloc_tfm_error(impl, PTR_ERR(tfm));
err = fips_validate_alg(&crypto_shash_alg(tfm)->base);
if (err)
goto out;
if (crypto_shash_digestsize(tfm) != vec->digest_size) {
pr_err("%s has wrong digest size\n", impl);
err = -EINVAL;
goto out;
}
if (vec->key) {
err = crypto_shash_setkey(tfm, vec->key, vec->key_size);
if (err) {
pr_err("failed to set %s key: %d\n", impl, err);
goto out;
}
}
err = crypto_shash_tfm_digest(tfm, vec->message, vec->message_size,
digest);
if (err) {
pr_err("%s digest computation failed: %d\n", impl, err);
goto out;
}
err = fips_check_result(digest, vec->digest, vec->digest_size,
impl, "digest");
out:
crypto_free_shash(tfm);
return err;
}
static int __init __must_check
fips_test_sha256_library(const struct fips_test *test, const char *impl)
{
const struct hash_testvec *vec = &test->hash;
u8 digest[SHA256_DIGEST_SIZE];
if (WARN_ON(vec->digest_size != SHA256_DIGEST_SIZE))
return -EINVAL;
sha256(vec->message, vec->message_size, digest);
return fips_check_result(digest, vec->digest, vec->digest_size,
impl, "digest");
}
/* Test a DRBG using the crypto_rng API. */
static int __init __must_check
fips_test_drbg(const struct fips_test *test, const char *impl)
{
const struct drbg_testvec *vec = &test->drbg;
struct crypto_rng *rng;
u8 *output = NULL;
struct drbg_test_data test_data;
struct drbg_string addtl, pers, testentropy;
int err;
rng = crypto_alloc_rng(impl, 0, 0);
if (IS_ERR(rng))
return fips_handle_alloc_tfm_error(impl, PTR_ERR(rng));
err = fips_validate_alg(&crypto_rng_alg(rng)->base);
if (err)
goto out;
output = kzalloc(vec->out_size, GFP_KERNEL);
if (!output) {
err = -ENOMEM;
goto out;
}
/*
* Initialize the DRBG with the entropy and personalization string given
* in the test vector.
*/
test_data.testentropy = &testentropy;
drbg_string_fill(&testentropy, vec->entropy, vec->entropy_size);
drbg_string_fill(&pers, vec->pers, vec->pers_size);
err = crypto_drbg_reset_test(rng, &pers, &test_data);
if (err) {
pr_err("failed to reset %s\n", impl);
goto out;
}
/*
* Generate some random bytes using the additional data string provided
* in the test vector. Also use the additional entropy if provided
* (relevant for the prediction-resistant DRBG variants only).
*/
drbg_string_fill(&addtl, vec->add_a, vec->add_size);
if (vec->entpr_size) {
drbg_string_fill(&testentropy, vec->entpr_a, vec->entpr_size);
err = crypto_drbg_get_bytes_addtl_test(rng, output,
vec->out_size, &addtl,
&test_data);
} else {
err = crypto_drbg_get_bytes_addtl(rng, output, vec->out_size,
&addtl);
}
if (err) {
pr_err("failed to get bytes from %s (try 1): %d\n",
impl, err);
goto out;
}
/*
* Do the same again, using a second additional data string, and (when
* applicable) a second additional entropy string.
*/
drbg_string_fill(&addtl, vec->add_b, vec->add_size);
if (test->drbg.entpr_size) {
drbg_string_fill(&testentropy, vec->entpr_b, vec->entpr_size);
err = crypto_drbg_get_bytes_addtl_test(rng, output,
vec->out_size, &addtl,
&test_data);
} else {
err = crypto_drbg_get_bytes_addtl(rng, output, vec->out_size,
&addtl);
}
if (err) {
pr_err("failed to get bytes from %s (try 2): %d\n",
impl, err);
goto out;
}
/* Check that the DRBG generated the expected output. */
err = fips_check_result(output, vec->output, vec->out_size,
impl, "get_bytes");
out:
kfree(output);
crypto_free_rng(rng);
return err;
}
/* Include the test vectors generated by the Python script. */
#include "fips140-generated-testvecs.h"
/*
* List of all self-tests. Keep this in sync with fips140_algorithms[].
*
* When possible, we have followed the FIPS 140-2 Implementation Guidance (IG)
* document when creating this list of tests. The result is intended to be a
* list of tests that is near-minimal (and thus minimizes runtime overhead)
* while complying with all requirements. For additional details, see the
* comment at the beginning of this file.
*/
static const struct fips_test fips140_selftests[] __initconst = {
/*
* Test for the AES library API.
*
* Since the AES library API may use its own AES implementation and the
* module provides no support for composing it with a mode of operation
* (it's just plain AES), we must test it directly.
*
* In contrast, we don't need to directly test the "aes" ciphers that
* are accessible through the crypto_cipher API (e.g. "aes-ce"), as they
* are covered indirectly by AES-CMAC and AES-ECB tests.
*/
{
.alg = "aes",
.impls = {"aes-lib"},
.func = fips_test_aes_library,
.skcipher = {
.key = fips_aes_key,
.key_size = sizeof(fips_aes_key),
.plaintext = fips_message,
.ciphertext = fips_aes_ecb_ciphertext,
.message_size = 16,
}
},
/*
* Tests for AES-CMAC, a.k.a. "cmac(aes)" in crypto API syntax.
*
* The IG requires that each underlying AES implementation be tested in
* an authenticated mode, if implemented. Of such modes, this module
* implements AES-GCM and AES-CMAC. However, AES-GCM doesn't "count"
* because this module's implementations of AES-GCM won't actually be
* FIPS-approved, due to a quirk in the FIPS requirements.
*
* Therefore, for us this requirement applies to AES-CMAC, so we must
* test the "cmac" template composed with each "aes" implementation.
*
* Separately from the above, we also must test all standalone
* implementations of "cmac(aes)" such as "cmac-aes-ce", as they don't
* reuse another full AES implementation and thus can't be covered by
* another test.
*/
{
.alg = "cmac(aes)",
.impls = {
/* "cmac" template with all "aes" implementations */
"cmac(aes-generic)",
"cmac(aes-arm64)",
"cmac(aes-ce)",
/* All standalone implementations of "cmac(aes)" */
"cmac-aes-neon",
"cmac-aes-ce",
},
.func = fips_test_hash,
.hash = {
.key = fips_aes_key,
.key_size = sizeof(fips_aes_key),
.message = fips_message,
.message_size = sizeof(fips_message),
.digest = fips_aes_cmac_digest,
.digest_size = sizeof(fips_aes_cmac_digest),
}
},
/*
* Tests for AES-ECB, a.k.a. "ecb(aes)" in crypto API syntax.
*
* The IG requires that each underlying AES implementation be tested in
* a mode that exercises the encryption direction of AES and in a mode
* that exercises the decryption direction of AES. CMAC only covers the
* encryption direction, so we choose ECB to test decryption. Thus, we
* test the "ecb" template composed with each "aes" implementation.
*
* Separately from the above, we also must test all standalone
* implementations of "ecb(aes)" such as "ecb-aes-ce", as they don't
* reuse another full AES implementation and thus can't be covered by
* another test.
*/
{
.alg = "ecb(aes)",
.impls = {
/* "ecb" template with all "aes" implementations */
"ecb(aes-generic)",
"ecb(aes-arm64)",
"ecb(aes-ce)",
/* All standalone implementations of "ecb(aes)" */
"ecb-aes-neon",
"ecb-aes-neonbs",
"ecb-aes-ce",
},
.func = fips_test_skcipher,
.skcipher = {
.key = fips_aes_key,
.key_size = sizeof(fips_aes_key),
.plaintext = fips_message,
.ciphertext = fips_aes_ecb_ciphertext,
.message_size = sizeof(fips_message)
}
},
/*
* Tests for AES-CBC, AES-CBC-CTS, AES-CTR, AES-XTS, and AES-GCM.
*
* According to the IG, an AES mode of operation doesn't need to have
* its own test, provided that (a) both the encryption and decryption
* directions of the underlying AES implementation are already tested
* via other mode(s), and (b) in the case of an authenticated mode, at
* least one other authenticated mode is already tested. The tests of
* the "cmac" and "ecb" templates fulfill these conditions; therefore,
* we don't need to test any other AES mode templates.
*
* This does *not* apply to standalone implementations of these modes
* such as "cbc-aes-ce", as such implementations don't reuse another
* full AES implementation and thus can't be covered by another test.
* We must test all such standalone implementations.
*
* The AES-GCM test isn't actually required, as it's expected that this
* module's AES-GCM implementation won't actually be able to be
* FIPS-approved. This is unfortunate; it's caused by the FIPS
* requirements for GCM being incompatible with GCM implementations that
* don't generate their own IVs. We choose to still include the AES-GCM
* test to keep it on par with the other FIPS-approved algorithms, in
* case it turns out that AES-GCM can be approved after all.
*/
{
.alg = "cbc(aes)",
.impls = {
/* All standalone implementations of "cbc(aes)" */
"cbc-aes-neon",
"cbc-aes-neonbs",
"cbc-aes-ce",
},
.func = fips_test_skcipher,
.skcipher = {
.key = fips_aes_key,
.key_size = sizeof(fips_aes_key),
.iv = fips_aes_iv,
.iv_size = sizeof(fips_aes_iv),
.plaintext = fips_message,
.ciphertext = fips_aes_cbc_ciphertext,
.message_size = sizeof(fips_message),
}
}, {
.alg = "cts(cbc(aes))",
.impls = {
/* All standalone implementations of "cts(cbc(aes))" */
"cts-cbc-aes-neon",
"cts-cbc-aes-ce",
},
.func = fips_test_skcipher,
/* Test vector taken from RFC 3962 */
.skcipher = {
.key = "\x63\x68\x69\x63\x6b\x65\x6e\x20"
"\x74\x65\x72\x69\x79\x61\x6b\x69",
.key_size = 16,
.iv = "\x00\x00\x00\x00\x00\x00\x00\x00"
"\x00\x00\x00\x00\x00\x00\x00\x00",
.iv_size = 16,
.plaintext = "\x49\x20\x77\x6f\x75\x6c\x64\x20"
"\x6c\x69\x6b\x65\x20\x74\x68\x65"
"\x20\x47\x65\x6e\x65\x72\x61\x6c"
"\x20\x47\x61\x75\x27\x73\x20",
.ciphertext = "\xfc\x00\x78\x3e\x0e\xfd\xb2\xc1"
"\xd4\x45\xd4\xc8\xef\xf7\xed\x22"
"\x97\x68\x72\x68\xd6\xec\xcc\xc0"
"\xc0\x7b\x25\xe2\x5e\xcf\xe5",
.message_size = 31,
}
}, {
.alg = "ctr(aes)",
.impls = {
/* All standalone implementations of "ctr(aes)" */
"ctr-aes-neon",
"ctr-aes-neonbs",
"ctr-aes-ce",
},
.func = fips_test_skcipher,
.skcipher = {
.key = fips_aes_key,
.key_size = sizeof(fips_aes_key),
.iv = fips_aes_iv,
.iv_size = sizeof(fips_aes_iv),
.plaintext = fips_message,
.ciphertext = fips_aes_ctr_ciphertext,
.message_size = sizeof(fips_message),
}
}, {
.alg = "xts(aes)",
.impls = {
/* All standalone implementations of "xts(aes)" */
"xts-aes-neon",
"xts-aes-neonbs",
"xts-aes-ce",
},
.func = fips_test_skcipher,
.skcipher = {
.key = fips_aes_xts_key,
.key_size = sizeof(fips_aes_xts_key),
.iv = fips_aes_iv,
.iv_size = sizeof(fips_aes_iv),
.plaintext = fips_message,
.ciphertext = fips_aes_xts_ciphertext,
.message_size = sizeof(fips_message),
}
}, {
.alg = "gcm(aes)",
.impls = {
/* All standalone implementations of "gcm(aes)" */
"gcm-aes-ce",
},
.func = fips_test_aead,
.aead = {
.key = fips_aes_key,
.key_size = sizeof(fips_aes_key),
.iv = fips_aes_iv,
/* The GCM implementations assume an IV size of 12. */
.iv_size = 12,
.assoc = fips_aes_gcm_assoc,
.assoc_size = sizeof(fips_aes_gcm_assoc),
.plaintext = fips_message,
.plaintext_size = sizeof(fips_message),
.ciphertext = fips_aes_gcm_ciphertext,
.ciphertext_size = sizeof(fips_aes_gcm_ciphertext),
}
},
/* Tests for SHA-1 */
{
.alg = "sha1",
.impls = {
/* All implementations of "sha1" */
"sha1-generic",
"sha1-ce"
},
.func = fips_test_hash,
.hash = {
.message = fips_message,
.message_size = sizeof(fips_message),
.digest = fips_sha1_digest,
.digest_size = sizeof(fips_sha1_digest)
}
},
/*
* Tests for all SHA-256 implementations other than the sha256() library
* function. As per the IG, these tests also fulfill the tests for the
* corresponding SHA-224 implementations.
*/
{
.alg = "sha256",
.impls = {
/* All implementations of "sha256" */
"sha256-generic",
"sha256-arm64",
"sha256-ce",
},
.func = fips_test_hash,
.hash = {
.message = fips_message,
.message_size = sizeof(fips_message),
.digest = fips_sha256_digest,
.digest_size = sizeof(fips_sha256_digest)
}
},
/*
* Test for the sha256() library function. This must be tested
* separately because it may use its own SHA-256 implementation.
*/
{
.alg = "sha256",
.impls = {"sha256-lib"},
.func = fips_test_sha256_library,
.hash = {
.message = fips_message,
.message_size = sizeof(fips_message),
.digest = fips_sha256_digest,
.digest_size = sizeof(fips_sha256_digest)
}
},
/*
* Tests for all SHA-512 implementations. As per the IG, these tests
* also fulfill the tests for the corresponding SHA-384 implementations.
*/
{
.alg = "sha512",
.impls = {
/* All implementations of "sha512" */
"sha512-generic",
"sha512-arm64",
"sha512-ce",
},
.func = fips_test_hash,
.hash = {
.message = fips_message,
.message_size = sizeof(fips_message),
.digest = fips_sha512_digest,
.digest_size = sizeof(fips_sha512_digest)
}
},
/*
* Test for HMAC. As per the IG, only one HMAC test is required,
* provided that the same HMAC code is shared by all HMAC-SHA*. This is
* true in our case. We choose HMAC-SHA256 for the test.
*
* Note that as per the IG, this can fulfill the test for the underlying
* SHA. However, we don't currently rely on this.
*/
{
.alg = "hmac(sha256)",
.func = fips_test_hash,
.hash = {
.key = fips_hmac_key,
.key_size = sizeof(fips_hmac_key),
.message = fips_message,
.message_size = sizeof(fips_message),
.digest = fips_hmac_sha256_digest,
.digest_size = sizeof(fips_hmac_sha256_digest)
}
},
/*
* Known-answer tests for the SP800-90A DRBG algorithms.
*
* These test vectors were manually extracted from
* https://csrc.nist.gov/CSRC/media/Projects/Cryptographic-Algorithm-Validation-Program/documents/drbg/drbgtestvectors.zip.
*
* The selection of these tests follows the FIPS 140-2 IG as well as
* Section 11 of SP800-90A:
*
* - We must test all DRBG types (HMAC, Hash, and CTR) that the module
* implements. However, currently the module only implements
* HMAC_DRBG (since CONFIG_CRYPTO_DRBG_CTR and CONFIG_CRYPTO_DRBG_HASH
* aren't enabled). Therefore, we only need to test HMAC_DRBG.
*
* - We only need to test one HMAC variant.
*
* - We must test all DRBG operations: Instantiate(), Reseed(), and
* Generate(). However, a single test sequence with a single output
* comparison may cover all three operations, and this is what we do.
* Note that Reseed() happens implicitly via the use of the additional
* input and also via the use of prediction resistance when enabled.
*
* - The personalization string, additional input, and prediction
* resistance support must be tested. Therefore we have chosen test
* vectors that have a nonempty personalization string and nonempty
* additional input, and we test the prediction-resistant variant.
* Testing the non-prediction-resistant variant is not required.
*/
{
.alg = "drbg_pr_hmac_sha256",
.func = fips_test_drbg,
.drbg = {
.entropy =
"\xc7\xcc\xbc\x67\x7e\x21\x66\x1e\x27\x2b\x63\xdd"
"\x3a\x78\xdc\xdf\x66\x6d\x3f\x24\xae\xcf\x37\x01"
"\xa9\x0d\x89\x8a\xa7\xdc\x81\x58\xae\xb2\x10\x15"
"\x7e\x18\x44\x6d\x13\xea\xdf\x37\x85\xfe\x81\xfb",
.entropy_size = 48,
.entpr_a =
"\x7b\xa1\x91\x5b\x3c\x04\xc4\x1b\x1d\x19\x2f\x1a"
"\x18\x81\x60\x3c\x6c\x62\x91\xb7\xe9\xf5\xcb\x96"
"\xbb\x81\x6a\xcc\xb5\xae\x55\xb6",
.entpr_b =
"\x99\x2c\xc7\x78\x7e\x3b\x88\x12\xef\xbe\xd3\xd2"
"\x7d\x2a\xa5\x86\xda\x8d\x58\x73\x4a\x0a\xb2\x2e"
"\xbb\x4c\x7e\xe3\x9a\xb6\x81\xc1",
.entpr_size = 32,
.output =
"\x95\x6f\x95\xfc\x3b\xb7\xfe\x3e\xd0\x4e\x1a\x14"
"\x6c\x34\x7f\x7b\x1d\x0d\x63\x5e\x48\x9c\x69\xe6"
"\x46\x07\xd2\x87\xf3\x86\x52\x3d\x98\x27\x5e\xd7"
"\x54\xe7\x75\x50\x4f\xfb\x4d\xfd\xac\x2f\x4b\x77"
"\xcf\x9e\x8e\xcc\x16\xa2\x24\xcd\x53\xde\x3e\xc5"
"\x55\x5d\xd5\x26\x3f\x89\xdf\xca\x8b\x4e\x1e\xb6"
"\x88\x78\x63\x5c\xa2\x63\x98\x4e\x6f\x25\x59\xb1"
"\x5f\x2b\x23\xb0\x4b\xa5\x18\x5d\xc2\x15\x74\x40"
"\x59\x4c\xb4\x1e\xcf\x9a\x36\xfd\x43\xe2\x03\xb8"
"\x59\x91\x30\x89\x2a\xc8\x5a\x43\x23\x7c\x73\x72"
"\xda\x3f\xad\x2b\xba\x00\x6b\xd1",
.out_size = 128,
.add_a =
"\x18\xe8\x17\xff\xef\x39\xc7\x41\x5c\x73\x03\x03"
"\xf6\x3d\xe8\x5f\xc8\xab\xe4\xab\x0f\xad\xe8\xd6"
"\x86\x88\x55\x28\xc1\x69\xdd\x76",
.add_b =
"\xac\x07\xfc\xbe\x87\x0e\xd3\xea\x1f\x7e\xb8\xe7"
"\x9d\xec\xe8\xe7\xbc\xf3\x18\x25\x77\x35\x4a\xaa"
"\x00\x99\x2a\xdd\x0a\x00\x50\x82",
.add_size = 32,
.pers =
"\xbc\x55\xab\x3c\xf6\x52\xb0\x11\x3d\x7b\x90\xb8"
"\x24\xc9\x26\x4e\x5a\x1e\x77\x0d\x3d\x58\x4a\xda"
"\xd1\x81\xe9\xf8\xeb\x30\x8f\x6f",
.pers_size = 32,
}
}
};
static int __init __must_check
fips_run_test(const struct fips_test *test)
{
int i;
int err;
/*
* If no implementations were specified, then just test the default one.
* Otherwise, test the specified list of implementations.
*/
if (test->impls[0] == NULL) {
err = test->func(test, test->alg);
if (err)
pr_emerg("self-tests failed for algorithm %s: %d\n",
test->alg, err);
return err;
}
for (i = 0; i < ARRAY_SIZE(test->impls) && test->impls[i] != NULL;
i++) {
err = test->func(test, test->impls[i]);
if (err) {
pr_emerg("self-tests failed for algorithm %s, implementation %s: %d\n",
test->alg, test->impls[i], err);
return err;
}
}
return 0;
}
bool __init fips140_run_selftests(void)
{
int i;
pr_info("running self-tests\n");
for (i = 0; i < ARRAY_SIZE(fips140_selftests); i++) {
if (fips_run_test(&fips140_selftests[i]) != 0) {
/* The caller is responsible for calling panic(). */
return false;
}
}
pr_info("all self-tests passed\n");
return true;
}