Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (94 commits)
netfilter: ctnetlink: fix gcc warning during compilation
net/netrom: Fix socket locking
netlabel: Always remove the correct address selector
ucc_geth.c: Fix upsmr setting in RMII mode
8139too: fix HW initial flow
af_iucv: Fix race when queuing incoming iucv messages
af_iucv: Test additional sk states in iucv_sock_shutdown
af_iucv: Reject incoming msgs if RECV_SHUTDOWN is set
af_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag
af_iucv: consider state IUCV_CLOSING when closing a socket
iwlwifi: DMA fixes
iwlwifi: add debugging for TX path
mwl8: fix build warning.
mac80211: fix alignment calculation bug
mac80211: do not print WARN if config interface
iwl3945: use cancel_delayed_work_sync to cancel rfkill_poll
iwlwifi: fix EEPROM validation mask to include OTP only devices
atmel: fix netdev ops conversion
pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM
mlx4_en: Fix cleanup if workqueue create in mlx4_en_add() fails
...
diff --git a/.gitignore b/.gitignore
index 869e1a3..51bd99d 100644
--- a/.gitignore
+++ b/.gitignore
@@ -49,6 +49,7 @@
include/linux/version.h
include/linux/utsrelease.h
include/linux/bounds.h
+include/generated
# stgit generated dirs
patches-*
diff --git a/Documentation/ABI/testing/debugfs-pktcdvd b/Documentation/ABI/testing/debugfs-pktcdvd
index bf9c16b..cf11736 100644
--- a/Documentation/ABI/testing/debugfs-pktcdvd
+++ b/Documentation/ABI/testing/debugfs-pktcdvd
@@ -1,4 +1,4 @@
-What: /debug/pktcdvd/pktcdvd[0-7]
+What: /sys/kernel/debug/pktcdvd/pktcdvd[0-7]
Date: Oct. 2006
KernelVersion: 2.6.20
Contact: Thomas Maier <balagi@justmail.de>
@@ -10,10 +10,10 @@
The pktcdvd module (packet writing driver) creates
these files in debugfs:
-/debug/pktcdvd/pktcdvd[0-7]/
+/sys/kernel/debug/pktcdvd/pktcdvd[0-7]/
info (0444) Lots of driver statistics and infos.
Example:
-------
-cat /debug/pktcdvd/pktcdvd0/info
+cat /sys/kernel/debug/pktcdvd/pktcdvd0/info
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index ecad6ee..6fab97e 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -1040,23 +1040,21 @@
iii. Plugging the queue to batch requests in anticipation of opportunities for
merge/sort optimizations
-This is just the same as in 2.4 so far, though per-device unplugging
-support is anticipated for 2.5. Also with a priority-based i/o scheduler,
-such decisions could be based on request priorities.
-
Plugging is an approach that the current i/o scheduling algorithm resorts to so
that it collects up enough requests in the queue to be able to take
advantage of the sorting/merging logic in the elevator. If the
queue is empty when a request comes in, then it plugs the request queue
-(sort of like plugging the bottom of a vessel to get fluid to build up)
+(sort of like plugging the bath tub of a vessel to get fluid to build up)
till it fills up with a few more requests, before starting to service
the requests. This provides an opportunity to merge/sort the requests before
passing them down to the device. There are various conditions when the queue is
unplugged (to open up the flow again), either through a scheduled task or
could be on demand. For example wait_on_buffer sets the unplugging going
-(by running tq_disk) so the read gets satisfied soon. So in the read case,
-the queue gets explicitly unplugged as part of waiting for completion,
-in fact all queues get unplugged as a side-effect.
+through sync_buffer() running blk_run_address_space(mapping). Or the caller
+can do it explicity through blk_unplug(bdev). So in the read case,
+the queue gets explicitly unplugged as part of waiting for completion on that
+buffer. For page driven IO, the address space ->sync_page() takes care of
+doing the blk_run_address_space().
Aside:
This is kind of controversial territory, as it's not clear if plugging is
@@ -1067,11 +1065,6 @@
multi-page bios being queued in one shot, we may not need to wait to merge
a big request from the broken up pieces coming by.
- Per-queue granularity unplugging (still a Todo) may help reduce some of the
- concerns with just a single tq_disk flush approach. Something like
- blk_kick_queue() to unplug a specific queue (right away ?)
- or optionally, all queues, is in the plan.
-
4.4 I/O contexts
I/O contexts provide a dynamically allocated per process data area. They may
be used in I/O schedulers, and in the block layer (could be used for IO statis,
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index a98a7fe..1a60887 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -6,15 +6,14 @@
Salient features
-a. Enable control of both RSS (mapped) and Page Cache (unmapped) pages
+a. Enable control of Anonymous, Page Cache (mapped and unmapped) and
+ Swap Cache memory pages.
b. The infrastructure allows easy addition of other types of memory to control
c. Provides *zero overhead* for non memory controller users
d. Provides a double LRU: global memory pressure causes reclaim from the
global LRU; a cgroup on hitting a limit, reclaims from the per
cgroup LRU
-NOTE: Swap Cache (unmapped) is not accounted now.
-
Benefits and Purpose of the memory controller
The memory controller isolates the memory behaviour of a group of tasks
@@ -290,34 +289,44 @@
moved to the parent. If you want to avoid that, force_empty will be useful.
5.2 stat file
- memory.stat file includes following statistics (now)
- cache - # of pages from page-cache and shmem.
- rss - # of pages from anonymous memory.
- pgpgin - # of event of charging
- pgpgout - # of event of uncharging
- active_anon - # of pages on active lru of anon, shmem.
- inactive_anon - # of pages on active lru of anon, shmem
- active_file - # of pages on active lru of file-cache
- inactive_file - # of pages on inactive lru of file cache
- unevictable - # of pages cannot be reclaimed.(mlocked etc)
- Below is depend on CONFIG_DEBUG_VM.
- inactive_ratio - VM internal parameter. (see mm/page_alloc.c)
- recent_rotated_anon - VM internal parameter. (see mm/vmscan.c)
- recent_rotated_file - VM internal parameter. (see mm/vmscan.c)
- recent_scanned_anon - VM internal parameter. (see mm/vmscan.c)
- recent_scanned_file - VM internal parameter. (see mm/vmscan.c)
+memory.stat file includes following statistics
- Memo:
+cache - # of bytes of page cache memory.
+rss - # of bytes of anonymous and swap cache memory.
+pgpgin - # of pages paged in (equivalent to # of charging events).
+pgpgout - # of pages paged out (equivalent to # of uncharging events).
+active_anon - # of bytes of anonymous and swap cache memory on active
+ lru list.
+inactive_anon - # of bytes of anonymous memory and swap cache memory on
+ inactive lru list.
+active_file - # of bytes of file-backed memory on active lru list.
+inactive_file - # of bytes of file-backed memory on inactive lru list.
+unevictable - # of bytes of memory that cannot be reclaimed (mlocked etc).
+
+The following additional stats are dependent on CONFIG_DEBUG_VM.
+
+inactive_ratio - VM internal parameter. (see mm/page_alloc.c)
+recent_rotated_anon - VM internal parameter. (see mm/vmscan.c)
+recent_rotated_file - VM internal parameter. (see mm/vmscan.c)
+recent_scanned_anon - VM internal parameter. (see mm/vmscan.c)
+recent_scanned_file - VM internal parameter. (see mm/vmscan.c)
+
+Memo:
recent_rotated means recent frequency of lru rotation.
recent_scanned means recent # of scans to lru.
showing for better debug please see the code for meanings.
+Note:
+ Only anonymous and swap cache memory is listed as part of 'rss' stat.
+ This should not be confused with the true 'resident set size' or the
+ amount of physical memory used by the cgroup. Per-cgroup rss
+ accounting is not done yet.
5.3 swappiness
Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
- Following cgroup's swapiness can't be changed.
+ Following cgroups' swapiness can't be changed.
- root cgroup (uses /proc/sys/vm/swappiness).
- a cgroup which uses hierarchy and it has child cgroup.
- a cgroup which uses hierarchy and not the root of hierarchy.
diff --git a/Documentation/cgroups/resource_counter.txt b/Documentation/cgroups/resource_counter.txt
index f196ac1..95b24d76 100644
--- a/Documentation/cgroups/resource_counter.txt
+++ b/Documentation/cgroups/resource_counter.txt
@@ -47,13 +47,18 @@
2. Basic accounting routines
- a. void res_counter_init(struct res_counter *rc)
+ a. void res_counter_init(struct res_counter *rc,
+ struct res_counter *rc_parent)
Initializes the resource counter. As usual, should be the first
routine called for a new counter.
- b. int res_counter_charge[_locked]
- (struct res_counter *rc, unsigned long val)
+ The struct res_counter *parent can be used to define a hierarchical
+ child -> parent relationship directly in the res_counter structure,
+ NULL can be used to define no relationship.
+
+ c. int res_counter_charge(struct res_counter *rc, unsigned long val,
+ struct res_counter **limit_fail_at)
When a resource is about to be allocated it has to be accounted
with the appropriate resource counter (controller should determine
@@ -67,15 +72,25 @@
* if the charging is performed first, then it should be uncharged
on error path (if the one is called).
- c. void res_counter_uncharge[_locked]
+ If the charging fails and a hierarchical dependency exists, the
+ limit_fail_at parameter is set to the particular res_counter element
+ where the charging failed.
+
+ d. int res_counter_charge_locked
+ (struct res_counter *rc, unsigned long val)
+
+ The same as res_counter_charge(), but it must not acquire/release the
+ res_counter->lock internally (it must be called with res_counter->lock
+ held).
+
+ e. void res_counter_uncharge[_locked]
(struct res_counter *rc, unsigned long val)
When a resource is released (freed) it should be de-accounted
from the resource counter it was accounted to. This is called
"uncharging".
- The _locked routines imply that the res_counter->lock is taken.
-
+ The _locked routines imply that the res_counter->lock is taken.
2.1 Other accounting routines
diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt
index 83009fdc..2e2c2ea 100644
--- a/Documentation/driver-model/platform.txt
+++ b/Documentation/driver-model/platform.txt
@@ -169,3 +169,62 @@
be probed later if another device registers. (Which is OK, since
this interface is only for use with non-hotpluggable devices.)
+
+Early Platform Devices and Drivers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The early platform interfaces provide platform data to platform device
+drivers early on during the system boot. The code is built on top of the
+early_param() command line parsing and can be executed very early on.
+
+Example: "earlyprintk" class early serial console in 6 steps
+
+1. Registering early platform device data
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code registers platform device data using the function
+early_platform_add_devices(). In the case of early serial console this
+should be hardware configuration for the serial port. Devices registered
+at this point will later on be matched against early platform drivers.
+
+2. Parsing kernel command line
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls parse_early_param() to parse the kernel
+command line. This will execute all matching early_param() callbacks.
+User specified early platform devices will be registered at this point.
+For the early serial console case the user can specify port on the
+kernel command line as "earlyprintk=serial.0" where "earlyprintk" is
+the class string, "serial" is the name of the platfrom driver and
+0 is the platform device id. If the id is -1 then the dot and the
+id can be omitted.
+
+3. Installing early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code may optionally force registration of all early
+platform drivers belonging to a certain class using the function
+early_platform_driver_register_all(). User specified devices from
+step 2 have priority over these. This step is omitted by the serial
+driver example since the early serial driver code should be disabled
+unless the user has specified port on the kernel command line.
+
+4. Early platform driver registration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Compiled-in platform drivers making use of early_platform_init() are
+automatically registered during step 2 or 3. The serial driver example
+should use early_platform_init("earlyprintk", &platform_driver).
+
+5. Probing of early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls early_platform_driver_probe() to match
+registered early platform devices associated with a certain class with
+registered early platform drivers. Matched devices will get probed().
+This step can be executed at any point during the early boot. As soon
+as possible may be good for the serial port case.
+
+6. Inside the early platform driver probe()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The driver code needs to take special care during early boot, especially
+when it comes to memory allocation and interrupt registration. The code
+in the probe() function can use is_early_platform_device() to check if
+it is called at early platform device or at the regular platform device
+time. The early serial driver performs register_console() at this point.
+
+For further information, see <linux/platform_device.h>.
diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt
index 6d6db60..dcf8335 100644
--- a/Documentation/filesystems/pohmelfs/design_notes.txt
+++ b/Documentation/filesystems/pohmelfs/design_notes.txt
@@ -56,9 +56,10 @@
data transfers.
POHMELFS clients operate with a working set of servers and are capable of balancing read-only
-operations (like lookups or directory listings) between them.
+operations (like lookups or directory listings) between them according to IO priorities.
Administrators can add or remove servers from the set at run-time via special commands (described
-in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers.
+in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected
+with write permission turned on. IO priority and permissions can be changed in run-time.
POHMELFS is capable of full data channel encryption and/or strong crypto hashing.
One can select any kernel supported cipher, encryption mode, hash type and operation mode
diff --git a/Documentation/filesystems/pohmelfs/info.txt b/Documentation/filesystems/pohmelfs/info.txt
index 4e3d501..db2e413 100644
--- a/Documentation/filesystems/pohmelfs/info.txt
+++ b/Documentation/filesystems/pohmelfs/info.txt
@@ -1,6 +1,8 @@
POHMELFS usage information.
-Mount options:
+Mount options.
+All but index, number of crypto threads and maximum IO size can changed via remount.
+
idx=%u
Each mountpoint is associated with a special index via this option.
Administrator can add or remove servers from the given index, so all mounts,
@@ -52,16 +54,27 @@
Usage examples.
-Add (or remove if it already exists) server server1.net:1025 into the working set with index $idx
+Add server server1.net:1025 into the working set with index $idx
with appropriate hash algorithm and key file and cipher algorithm, mode and key file:
-$cfg -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
+$cfg A add -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
Mount filesystem with given index $idx to /mnt mountpoint.
Client will connect to all servers specified in the working set via previous command:
mount -t pohmel -o idx=$idx q /mnt
-One can add or remove servers from working set after mounting too.
+Change permissions to read-only (-I 1 option, '-I 2' - write-only, 3 - rw):
+$cfg A modify -a server1.net -p 1025 -i $idx -I 1
+Change IO priority to 123 (node with the highest priority gets read requests).
+$cfg A modify -a server1.net -p 1025 -i $idx -P 123
+
+One can check currect status of all connections in the mountstats file:
+# cat /proc/$PID/mountstats
+...
+device none mounted on /mnt with fstype pohmel
+idx addr(:port) socket_type protocol active priority permissions
+0 server1.net:1026 1 6 1 250 1
+0 server2.net:1025 1 6 1 123 3
Server installation.
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index deeeed0..f49eecf 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -277,8 +277,7 @@
unfreeze_fs: called when VFS is unlocking a filesystem and making it writable
again.
- statfs: called when the VFS needs to get filesystem statistics. This
- is called with the kernel lock held
+ statfs: called when the VFS needs to get filesystem statistics.
remount_fs: called when the filesystem is remounted. This is called
with the kernel lock held
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index d4b0567..d76cfd8 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -316,6 +316,16 @@
#arch/m68k/fpsp040/Makefile
ldflags-y := -x
+ subdir-ccflags-y, subdir-asflags-y
+ The two flags listed above are similar to ccflags-y and as-falgs-y.
+ The difference is that the subdir- variants has effect for the kbuild
+ file where tey are present and all subdirectories.
+ Options specified using subdir-* are added to the commandline before
+ the options specified using the non-subdir variants.
+
+ Example:
+ subdir-ccflags-y := -Werror
+
CFLAGS_$@, AFLAGS_$@
CFLAGS_$@ and AFLAGS_$@ only apply to commands in current
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 6172e43..600cdd7 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -134,7 +134,7 @@
./include/asm/setup.h as COMMAND_LINE_SIZE.
- acpi= [HW,ACPI,X86-64,i386]
+ acpi= [HW,ACPI,X86]
Advanced Configuration and Power Interface
Format: { force | off | ht | strict | noirq | rsdt }
force -- enable ACPI if default was off
@@ -218,7 +218,7 @@
acpi_osi="!string2" # remove built-in string2
acpi_osi= # disable all strings
- acpi_pm_good [X86-32,X86-64]
+ acpi_pm_good [X86]
Override the pmtimer bug detection: force the kernel
to assume that this machine's pmtimer latches its value
and always returns good values.
@@ -231,6 +231,35 @@
power state again in power transition.
1 : disable the power state check
+ acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
+ Format: { level | edge | high | low }
+
+ acpi_serialize [HW,ACPI] force serialization of AML methods
+
+ acpi_skip_timer_override [HW,ACPI]
+ Recognize and ignore IRQ0/pin2 Interrupt Override.
+ For broken nForce2 BIOS resulting in XT-PIC timer.
+
+ acpi_sleep= [HW,ACPI] Sleep options
+ Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
+ old_ordering, s4_nonvs }
+ See Documentation/power/video.txt for information on
+ s3_bios and s3_mode.
+ s3_beep is for debugging; it makes the PC's speaker beep
+ as soon as the kernel's real-mode entry point is called.
+ s4_nohwsig prevents ACPI hardware signature from being
+ used during resume from hibernation.
+ old_ordering causes the ACPI 1.0 ordering of the _PTS
+ control method, with respect to putting devices into
+ low power states, to be enforced (the ACPI 2.0 ordering
+ of _PTS is used by default).
+ s4_nonvs prevents the kernel from saving/restoring the
+ ACPI NVS memory during hibernation.
+
+ acpi_use_timer_override [HW,ACPI]
+ Use timer override. For some broken Nvidia NF5 boards
+ that require a timer override, but don't have HPET
+
acpi_enforce_resources= [ACPI]
{ strict | lax | no }
Check for resource conflicts between native drivers
@@ -250,6 +279,9 @@
ad1848= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma2>,<type>
+ add_efi_memmap [EFI; X86] Include EFI memory map in
+ kernel's map of available physical RAM.
+
advansys= [HW,SCSI]
See header of drivers/scsi/advansys.c.
@@ -459,7 +491,7 @@
Also note the kernel might malfunction if you disable
some critical bits.
- code_bytes [IA32/X86_64] How many bytes of object code to print
+ code_bytes [X86] How many bytes of object code to print
in an oops report.
Range: 0 - 8192
Default: 64
@@ -592,7 +624,7 @@
MTRR settings. This parameter disables that behavior,
possibly causing your machine to run very slowly.
- disable_timer_pin_1 [i386,x86-64]
+ disable_timer_pin_1 [X86]
Disable PIN 1 of APIC timer
Can be useful to work around chipset bugs.
@@ -624,7 +656,7 @@
UART at the specified I/O port or MMIO address.
The options are the same as for ttyS, above.
- earlyprintk= [X86-32,X86-64,SH,BLACKFIN]
+ earlyprintk= [X86,SH,BLACKFIN]
earlyprintk=vga
earlyprintk=serial[,ttySn[,baudrate]]
earlyprintk=dbgp
@@ -659,7 +691,7 @@
See Documentation/block/as-iosched.txt and
Documentation/block/deadline-iosched.txt for details.
- elfcorehdr= [IA64,PPC,SH,X86-32,X86_64]
+ elfcorehdr= [IA64,PPC,SH,X86]
Specifies physical address of start of kernel core
image elf header. Generally kexec loader will
pass this option to capture kernel.
@@ -938,7 +970,7 @@
See comment before marvel_specify_io7 in
arch/alpha/kernel/core_marvel.c.
- io_delay= [X86-32,X86-64] I/O delay method
+ io_delay= [X86] I/O delay method
0x80
Standard port 0x80 based delay
0xed
@@ -1000,7 +1032,7 @@
keepinitrd [HW,ARM]
- kernelcore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter
+ kernelcore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter
specifies the amount of memory usable by the kernel
for non-movable allocations. The requested amount is
spread evenly throughout all nodes in the system. The
@@ -1034,7 +1066,7 @@
Configure the RouterBoard 532 series on-chip
Ethernet adapter MAC address.
- kstack=N [X86-32,X86-64] Print N words from the kernel stack
+ kstack=N [X86] Print N words from the kernel stack
in oops dumps.
l2cr= [PPC]
@@ -1044,7 +1076,7 @@
lapic [X86-32,APIC] Enable the local APIC even if BIOS
disabled it.
- lapic_timer_c2_ok [X86-32,x86-64,APIC] trust the local apic timer
+ lapic_timer_c2_ok [X86,APIC] trust the local apic timer
in C2 power state.
libata.dma= [LIBATA] DMA control
@@ -1229,7 +1261,7 @@
[KNL,SH] Allow user to override the default size for
per-device physically contiguous DMA buffers.
- memmap=exactmap [KNL,X86-32,X86_64] Enable setting of an exact
+ memmap=exactmap [KNL,X86] Enable setting of an exact
E820 memory map, as specified by the user.
Such memmap=exactmap lines can be constructed based on
BIOS output or other requirements. See the memmap=nn@ss
@@ -1320,7 +1352,7 @@
mousedev.yres= [MOUSE] Vertical screen resolution, used for devices
reporting absolute coordinates, such as tablets
- movablecore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter
+ movablecore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter
is similar to kernelcore except it specifies the
amount of memory used for migratable allocations.
If both kernelcore and movablecore is specified,
@@ -1422,7 +1454,7 @@
when a NMI is triggered.
Format: [state][,regs][,debounce][,die]
- nmi_watchdog= [KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels
+ nmi_watchdog= [KNL,BUGS=X86] Debugging features for SMP kernels
Format: [panic,][num]
Valid num: 0,1,2
0 - turn nmi_watchdog off
@@ -1475,11 +1507,11 @@
nodsp [SH] Disable hardware DSP at boot time.
- noefi [X86-32,X86-64] Disable EFI runtime services support.
+ noefi [X86] Disable EFI runtime services support.
noexec [IA-64]
- noexec [X86-32,X86-64]
+ noexec [X86]
On X86-32 available only on PAE configured kernels.
noexec=on: enable non-executable mappings (default)
noexec=off: disable non-executable mappings
@@ -1525,7 +1557,7 @@
noirqdebug [X86-32] Disables the code which attempts to detect and
disable unhandled interrupt sources.
- no_timer_check [X86-32,X86_64,APIC] Disables the code which tests for
+ no_timer_check [X86,APIC] Disables the code which tests for
broken timer IRQ sources.
noisapnp [ISAPNP] Disables ISA PnP code.
@@ -1689,7 +1721,7 @@
disable the use of PCIE advanced error reporting.
nodomains [PCI] Disable support for multiple PCI
root domains (aka PCI segments, in ACPI-speak).
- nommconf [X86-32,X86_64] Disable use of MMCONFIG for PCI
+ nommconf [X86] Disable use of MMCONFIG for PCI
Configuration
nomsi [MSI] If the PCI_MSI kernel config parameter is
enabled, this kernel boot option can be used to
@@ -1838,6 +1870,12 @@
autoconfiguration.
Ranges are in pairs (memory base and size).
+ ports= [IP_VS_FTP] IPVS ftp helper module
+ Default is 21.
+ Up to 8 (IP_VS_APP_MAX_PORTS) ports
+ may be specified.
+ Format: <port>,<port>....
+
print-fatal-signals=
[KNL] debug: print fatal signals
print-fatal-signals=1: print segfault info to
@@ -2380,7 +2418,7 @@
reported either.
unknown_nmi_panic
- [X86-32,X86-64]
+ [X86]
Set unknown_nmi_panic=1 early on boot.
usbcore.autosuspend=
@@ -2447,12 +2485,12 @@
medium is write-protected).
Example: quirks=0419:aaf5:rl,0421:0433:rc
- vdso= [X86-32,SH,x86-64]
+ vdso= [X86,SH]
vdso=2: enable compat VDSO (default with COMPAT_VDSO)
vdso=1: enable VDSO (default)
vdso=0: disable VDSO mapping
- vdso32= [X86-32,X86-64]
+ vdso32= [X86]
vdso32=2: enable compat VDSO (default with COMPAT_VDSO)
vdso32=1: enable 32-bit VDSO (default)
vdso32=0: disable 32-bit VDSO mapping
diff --git a/Documentation/lguest/.gitignore b/Documentation/lguest/.gitignore
new file mode 100644
index 0000000..115587f
--- /dev/null
+++ b/Documentation/lguest/.gitignore
@@ -0,0 +1 @@
+lguest
diff --git a/Documentation/lguest/lguest.txt b/Documentation/lguest/lguest.txt
index 29510dc..28c7473 100644
--- a/Documentation/lguest/lguest.txt
+++ b/Documentation/lguest/lguest.txt
@@ -3,11 +3,11 @@
/, /` - or, A Young Coder's Illustrated Hypervisor
\\"--\\ http://lguest.ozlabs.org
-Lguest is designed to be a minimal hypervisor for the Linux kernel, for
-Linux developers and users to experiment with virtualization with the
-minimum of complexity. Nonetheless, it should have sufficient
-features to make it useful for specific tasks, and, of course, you are
-encouraged to fork and enhance it (see drivers/lguest/README).
+Lguest is designed to be a minimal 32-bit x86 hypervisor for the Linux kernel,
+for Linux developers and users to experiment with virtualization with the
+minimum of complexity. Nonetheless, it should have sufficient features to
+make it useful for specific tasks, and, of course, you are encouraged to fork
+and enhance it (see drivers/lguest/README).
Features:
@@ -37,6 +37,7 @@
"Paravirtualized guest support" = Y
"Lguest guest support" = Y
"High Memory Support" = off/4GB
+ "PAE (Physical Address Extension) Support" = N
"Alignment value to which kernel should be aligned" = 0x100000
(CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and
CONFIG_PHYSICAL_ALIGN=0x100000)
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 0ab0230..d16b7a1 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -43,12 +43,11 @@
2) Representing devices without a current OF specification
a) PHY nodes
b) Interrupt controllers
- c) CFI or JEDEC memory-mapped NOR flash
- d) 4xx/Axon EMAC ethernet nodes
- e) Xilinx IP cores
- f) USB EHCI controllers
- g) MDIO on GPIOs
- h) SPI busses
+ c) 4xx/Axon EMAC ethernet nodes
+ d) Xilinx IP cores
+ e) USB EHCI controllers
+ f) MDIO on GPIOs
+ g) SPI busses
VII - Marvell Discovery mv64[345]6x System Controller chips
1) The /system-controller node
@@ -999,7 +998,7 @@
translation of SOC addresses for memory mapped SOC registers.
- bus-frequency: Contains the bus frequency for the SOC node.
Typically, the value of this field is filled in by the boot
- loader.
+ loader.
Recommended properties:
@@ -1287,71 +1286,7 @@
device_type = "open-pic";
};
- c) CFI or JEDEC memory-mapped NOR flash
-
- Flash chips (Memory Technology Devices) are often used for solid state
- file systems on embedded devices.
-
- - compatible : should contain the specific model of flash chip(s)
- used, if known, followed by either "cfi-flash" or "jedec-flash"
- - reg : Address range of the flash chip
- - bank-width : Width (in bytes) of the flash bank. Equal to the
- device width times the number of interleaved chips.
- - device-width : (optional) Width of a single flash chip. If
- omitted, assumed to be equal to 'bank-width'.
- - #address-cells, #size-cells : Must be present if the flash has
- sub-nodes representing partitions (see below). In this case
- both #address-cells and #size-cells must be equal to 1.
-
- For JEDEC compatible devices, the following additional properties
- are defined:
-
- - vendor-id : Contains the flash chip's vendor id (1 byte).
- - device-id : Contains the flash chip's device id (1 byte).
-
- In addition to the information on the flash bank itself, the
- device tree may optionally contain additional information
- describing partitions of the flash address space. This can be
- used on platforms which have strong conventions about which
- portions of the flash are used for what purposes, but which don't
- use an on-flash partition table such as RedBoot.
-
- Each partition is represented as a sub-node of the flash device.
- Each node's name represents the name of the corresponding
- partition of the flash device.
-
- Flash partitions
- - reg : The partition's offset and size within the flash bank.
- - label : (optional) The label / name for this flash partition.
- If omitted, the label is taken from the node name (excluding
- the unit address).
- - read-only : (optional) This parameter, if present, is a hint to
- Linux that this flash partition should only be mounted
- read-only. This is usually used for flash partitions
- containing early-boot firmware images or data which should not
- be clobbered.
-
- Example:
-
- flash@ff000000 {
- compatible = "amd,am29lv128ml", "cfi-flash";
- reg = <ff000000 01000000>;
- bank-width = <4>;
- device-width = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- fs@0 {
- label = "fs";
- reg = <0 f80000>;
- };
- firmware@f80000 {
- label ="firmware";
- reg = <f80000 80000>;
- read-only;
- };
- };
-
- d) 4xx/Axon EMAC ethernet nodes
+ c) 4xx/Axon EMAC ethernet nodes
The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
the Axon bridge. To operate this needs to interact with a ths
@@ -1499,7 +1434,7 @@
available.
For Axon: 0x0000012a
- e) Xilinx IP cores
+ d) Xilinx IP cores
The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
@@ -1761,7 +1696,7 @@
listed above, nodes for these devices should include a phy-handle
property, and may include other common network device properties
like local-mac-address.
-
+
iv) Xilinx Uartlite
Xilinx uartlite devices are simple fixed speed serial ports.
@@ -1793,7 +1728,7 @@
- reg-offset : A value of 3 is required
- reg-shift : A value of 2 is required
- f) USB EHCI controllers
+ e) USB EHCI controllers
Required properties:
- compatible : should be "usb-ehci".
@@ -1819,7 +1754,7 @@
big-endian;
};
- g) MDIO on GPIOs
+ f) MDIO on GPIOs
Currently defined compatibles:
- virtual,gpio-mdio
@@ -1839,7 +1774,7 @@
&qe_pio_c 6>;
};
- h) SPI (Serial Peripheral Interface) busses
+ g) SPI (Serial Peripheral Interface) busses
SPI busses can be described with a node for the SPI master device
and a set of child nodes for each SPI slave on the bus. For this
diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
index d0ab33e..b6d2e21 100644
--- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
@@ -7,8 +7,10 @@
Recommended properties :
- - compatible : Should be "fsl-i2c" for parts compatible with
- Freescale I2C specifications.
+ - compatible : compatibility list with 2 entries, the first should
+ be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor,
+ e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one
+ should be "fsl-i2c".
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
@@ -16,17 +18,31 @@
controller you have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- - dfsrr : boolean; if defined, indicates that this I2C device has
- a digital filter sampling rate register
- - fsl5200-clocking : boolean; if defined, indicated that this device
- uses the FSL 5200 clocking mechanism.
+ - fsl,preserve-clocking : boolean; if defined, the clock settings
+ from the bootloader are preserved (not touched).
+ - clock-frequency : desired I2C bus clock frequency in Hz.
-Example :
- i2c@3000 {
- interrupt-parent = <40000>;
- interrupts = <1b 3>;
- reg = <3000 18>;
- device_type = "i2c";
- compatible = "fsl-i2c";
- dfsrr;
+Examples :
+
+ i2c@3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ cell-index = <0>;
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl,preserve-clocking;
};
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ clock-frequency = <400000>;
+ };
+
diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
new file mode 100644
index 0000000..667c9bd
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
@@ -0,0 +1,80 @@
+CFI or JEDEC memory-mapped NOR flash
+
+Flash chips (Memory Technology Devices) are often used for solid state
+file systems on embedded devices.
+
+ - compatible : should contain the specific model of flash chip(s)
+ used, if known, followed by either "cfi-flash" or "jedec-flash"
+ - reg : Address range(s) of the flash chip(s)
+ It's possible to (optionally) define multiple "reg" tuples so that
+ non-identical NOR chips can be described in one flash node.
+ - bank-width : Width (in bytes) of the flash bank. Equal to the
+ device width times the number of interleaved chips.
+ - device-width : (optional) Width of a single flash chip. If
+ omitted, assumed to be equal to 'bank-width'.
+ - #address-cells, #size-cells : Must be present if the flash has
+ sub-nodes representing partitions (see below). In this case
+ both #address-cells and #size-cells must be equal to 1.
+
+For JEDEC compatible devices, the following additional properties
+are defined:
+
+ - vendor-id : Contains the flash chip's vendor id (1 byte).
+ - device-id : Contains the flash chip's device id (1 byte).
+
+In addition to the information on the flash bank itself, the
+device tree may optionally contain additional information
+describing partitions of the flash address space. This can be
+used on platforms which have strong conventions about which
+portions of the flash are used for what purposes, but which don't
+use an on-flash partition table such as RedBoot.
+
+Each partition is represented as a sub-node of the flash device.
+Each node's name represents the name of the corresponding
+partition of the flash device.
+
+Flash partitions
+ - reg : The partition's offset and size within the flash bank.
+ - label : (optional) The label / name for this flash partition.
+ If omitted, the label is taken from the node name (excluding
+ the unit address).
+ - read-only : (optional) This parameter, if present, is a hint to
+ Linux that this flash partition should only be mounted
+ read-only. This is usually used for flash partitions
+ containing early-boot firmware images or data which should not
+ be clobbered.
+
+Example:
+
+ flash@ff000000 {
+ compatible = "amd,am29lv128ml", "cfi-flash";
+ reg = <ff000000 01000000>;
+ bank-width = <4>;
+ device-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ fs@0 {
+ label = "fs";
+ reg = <0 f80000>;
+ };
+ firmware@f80000 {
+ label ="firmware";
+ reg = <f80000 80000>;
+ read-only;
+ };
+ };
+
+Here an example with multiple "reg" tuples:
+
+ flash@f0000000,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "intel,PC48F4400P0VB", "cfi-flash";
+ reg = <0 0x00000000 0x02000000
+ 0 0x02000000 0x02000000>;
+ bank-width = <2>;
+ partition@0 {
+ label = "test-part1";
+ reg = <0 0x04000000>;
+ };
+ };
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index c5948f2..88b7433 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -169,7 +169,7 @@
What `model` option values are available depends on the codec chip.
Check your codec chip from the codec proc file (see "Codec Proc-File"
section below). It will show the vendor/product name of your codec
-chip. Then, see Documentation/sound/alsa/HD-Audio-Modelstxt file,
+chip. Then, see Documentation/sound/alsa/HD-Audio-Models.txt file,
the section of HD-audio driver. You can find a list of codecs
and `model` options belonging to each codec. For example, for Realtek
ALC262 codec chip, pass `model=ultra` for devices that are compatible
@@ -177,7 +177,7 @@
Thus, the first thing you can do for any brand-new, unsupported and
non-working HD-audio hardware is to check HD-audio codec and several
-different `model` option values. If you have a luck, some of them
+different `model` option values. If you have any luck, some of them
might suit with your device well.
Some codecs such as ALC880 have a special model option `model=test`.
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index 0f5122e..4a02d25 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -511,10 +511,16 @@
This sets up the device clock rate, SPI mode, and word sizes.
Drivers may change the defaults provided by board_info, and then
call spi_setup(spi) to invoke this routine. It may sleep.
+
Unless each SPI slave has its own configuration registers, don't
change them right away ... otherwise drivers could corrupt I/O
that's in progress for other SPI devices.
+ ** BUG ALERT: for some reason the first version of
+ ** many spi_master drivers seems to get this wrong.
+ ** When you code setup(), ASSUME that the controller
+ ** is actively processing transfers for another device.
+
master->transfer(struct spi_device *spi, struct spi_message *message)
This must not sleep. Its responsibility is arrange that the
transfer happens and its complete() callback is issued. The two
diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt
index a34d55b..df38ef04 100644
--- a/Documentation/sysctl/net.txt
+++ b/Documentation/sysctl/net.txt
@@ -95,7 +95,7 @@
There is only one file in this directory.
unix_dgram_qlen limits the max number of datagrams queued in Unix domain
-socket's buffer. It will not take effect unless PF_UNIX flag is spicified.
+socket's buffer. It will not take effect unless PF_UNIX flag is specified.
3. /proc/sys/net/ipv4 - IPV4 settings
diff --git a/Documentation/tomoyo.txt b/Documentation/tomoyo.txt
new file mode 100644
index 0000000..b3a232c
--- /dev/null
+++ b/Documentation/tomoyo.txt
@@ -0,0 +1,55 @@
+--- What is TOMOYO? ---
+
+TOMOYO is a name-based MAC extension (LSM module) for the Linux kernel.
+
+LiveCD-based tutorials are available at
+http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/ubuntu8.04-live/
+http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/centos5-live/ .
+Though these tutorials use non-LSM version of TOMOYO, they are useful for you
+to know what TOMOYO is.
+
+--- How to enable TOMOYO? ---
+
+Build the kernel with CONFIG_SECURITY_TOMOYO=y and pass "security=tomoyo" on
+kernel's command line.
+
+Please see http://tomoyo.sourceforge.jp/en/2.2.x/ for details.
+
+--- Where is documentation? ---
+
+User <-> Kernel interface documentation is available at
+http://tomoyo.sourceforge.jp/en/2.2.x/policy-reference.html .
+
+Materials we prepared for seminars and symposiums are available at
+http://sourceforge.jp/projects/tomoyo/docs/?category_id=532&language_id=1 .
+Below lists are chosen from three aspects.
+
+What is TOMOYO?
+ TOMOYO Linux Overview
+ http://sourceforge.jp/projects/tomoyo/docs/lca2009-takeda.pdf
+ TOMOYO Linux: pragmatic and manageable security for Linux
+ http://sourceforge.jp/projects/tomoyo/docs/freedomhectaipei-tomoyo.pdf
+ TOMOYO Linux: A Practical Method to Understand and Protect Your Own Linux Box
+ http://sourceforge.jp/projects/tomoyo/docs/PacSec2007-en-no-demo.pdf
+
+What can TOMOYO do?
+ Deep inside TOMOYO Linux
+ http://sourceforge.jp/projects/tomoyo/docs/lca2009-kumaneko.pdf
+ The role of "pathname based access control" in security.
+ http://sourceforge.jp/projects/tomoyo/docs/lfj2008-bof.pdf
+
+History of TOMOYO?
+ Realities of Mainlining
+ http://sourceforge.jp/projects/tomoyo/docs/lfj2008.pdf
+
+--- What is future plan? ---
+
+We believe that inode based security and name based security are complementary
+and both should be used together. But unfortunately, so far, we cannot enable
+multiple LSM modules at the same time. We feel sorry that you have to give up
+SELinux/SMACK/AppArmor etc. when you want to use TOMOYO.
+
+We hope that LSM becomes stackable in future. Meanwhile, you can use non-LSM
+version of TOMOYO, available at http://tomoyo.sourceforge.jp/en/1.6.x/ .
+LSM version of TOMOYO is a subset of non-LSM version of TOMOYO. We are planning
+to port non-LSM version's functionalities to LSM versions.
diff --git a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX
index 2131b00..2f77ced 100644
--- a/Documentation/vm/00-INDEX
+++ b/Documentation/vm/00-INDEX
@@ -1,5 +1,7 @@
00-INDEX
- this file.
+active_mm.txt
+ - An explanation from Linus about tsk->active_mm vs tsk->mm.
balance
- various information on memory balancing.
hugetlbpage.txt
diff --git a/Documentation/vm/active_mm.txt b/Documentation/vm/active_mm.txt
new file mode 100644
index 0000000..4ee1f64
--- /dev/null
+++ b/Documentation/vm/active_mm.txt
@@ -0,0 +1,83 @@
+List: linux-kernel
+Subject: Re: active_mm
+From: Linus Torvalds <torvalds () transmeta ! com>
+Date: 1999-07-30 21:36:24
+
+Cc'd to linux-kernel, because I don't write explanations all that often,
+and when I do I feel better about more people reading them.
+
+On Fri, 30 Jul 1999, David Mosberger wrote:
+>
+> Is there a brief description someplace on how "mm" vs. "active_mm" in
+> the task_struct are supposed to be used? (My apologies if this was
+> discussed on the mailing lists---I just returned from vacation and
+> wasn't able to follow linux-kernel for a while).
+
+Basically, the new setup is:
+
+ - we have "real address spaces" and "anonymous address spaces". The
+ difference is that an anonymous address space doesn't care about the
+ user-level page tables at all, so when we do a context switch into an
+ anonymous address space we just leave the previous address space
+ active.
+
+ The obvious use for a "anonymous address space" is any thread that
+ doesn't need any user mappings - all kernel threads basically fall into
+ this category, but even "real" threads can temporarily say that for
+ some amount of time they are not going to be interested in user space,
+ and that the scheduler might as well try to avoid wasting time on
+ switching the VM state around. Currently only the old-style bdflush
+ sync does that.
+
+ - "tsk->mm" points to the "real address space". For an anonymous process,
+ tsk->mm will be NULL, for the logical reason that an anonymous process
+ really doesn't _have_ a real address space at all.
+
+ - however, we obviously need to keep track of which address space we
+ "stole" for such an anonymous user. For that, we have "tsk->active_mm",
+ which shows what the currently active address space is.
+
+ The rule is that for a process with a real address space (ie tsk->mm is
+ non-NULL) the active_mm obviously always has to be the same as the real
+ one.
+
+ For a anonymous process, tsk->mm == NULL, and tsk->active_mm is the
+ "borrowed" mm while the anonymous process is running. When the
+ anonymous process gets scheduled away, the borrowed address space is
+ returned and cleared.
+
+To support all that, the "struct mm_struct" now has two counters: a
+"mm_users" counter that is how many "real address space users" there are,
+and a "mm_count" counter that is the number of "lazy" users (ie anonymous
+users) plus one if there are any real users.
+
+Usually there is at least one real user, but it could be that the real
+user exited on another CPU while a lazy user was still active, so you do
+actually get cases where you have a address space that is _only_ used by
+lazy users. That is often a short-lived state, because once that thread
+gets scheduled away in favour of a real thread, the "zombie" mm gets
+released because "mm_users" becomes zero.
+
+Also, a new rule is that _nobody_ ever has "init_mm" as a real MM any
+more. "init_mm" should be considered just a "lazy context when no other
+context is available", and in fact it is mainly used just at bootup when
+no real VM has yet been created. So code that used to check
+
+ if (current->mm == &init_mm)
+
+should generally just do
+
+ if (!current->mm)
+
+instead (which makes more sense anyway - the test is basically one of "do
+we have a user context", and is generally done by the page fault handler
+and things like that).
+
+Anyway, I put a pre-patch-2.3.13-1 on ftp.kernel.org just a moment ago,
+because it slightly changes the interfaces to accomodate the alpha (who
+would have thought it, but the alpha actually ends up having one of the
+ugliest context switch codes - unlike the other architectures where the MM
+and register state is separate, the alpha PALcode joins the two, and you
+need to switch both together).
+
+(From http://marc.info/?l=linux-kernel&m=93337278602211&w=2)
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index 0706a72..2d70d0d 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -1,588 +1,691 @@
+ ==============================
+ UNEVICTABLE LRU INFRASTRUCTURE
+ ==============================
-This document describes the Linux memory management "Unevictable LRU"
-infrastructure and the use of this infrastructure to manage several types
-of "unevictable" pages. The document attempts to provide the overall
-rationale behind this mechanism and the rationale for some of the design
-decisions that drove the implementation. The latter design rationale is
-discussed in the context of an implementation description. Admittedly, one
-can obtain the implementation details--the "what does it do?"--by reading the
-code. One hopes that the descriptions below add value by provide the answer
-to "why does it do that?".
+========
+CONTENTS
+========
-Unevictable LRU Infrastructure:
+ (*) The Unevictable LRU
-The Unevictable LRU adds an additional LRU list to track unevictable pages
-and to hide these pages from vmscan. This mechanism is based on a patch by
-Larry Woodman of Red Hat to address several scalability problems with page
+ - The unevictable page list.
+ - Memory control group interaction.
+ - Marking address spaces unevictable.
+ - Detecting Unevictable Pages.
+ - vmscan's handling of unevictable pages.
+
+ (*) mlock()'d pages.
+
+ - History.
+ - Basic management.
+ - mlock()/mlockall() system call handling.
+ - Filtering special vmas.
+ - munlock()/munlockall() system call handling.
+ - Migrating mlocked pages.
+ - mmap(MAP_LOCKED) system call handling.
+ - munmap()/exit()/exec() system call handling.
+ - try_to_unmap().
+ - try_to_munlock() reverse map scan.
+ - Page reclaim in shrink_*_list().
+
+
+============
+INTRODUCTION
+============
+
+This document describes the Linux memory manager's "Unevictable LRU"
+infrastructure and the use of this to manage several types of "unevictable"
+pages.
+
+The document attempts to provide the overall rationale behind this mechanism
+and the rationale for some of the design decisions that drove the
+implementation. The latter design rationale is discussed in the context of an
+implementation description. Admittedly, one can obtain the implementation
+details - the "what does it do?" - by reading the code. One hopes that the
+descriptions below add value by provide the answer to "why does it do that?".
+
+
+===================
+THE UNEVICTABLE LRU
+===================
+
+The Unevictable LRU facility adds an additional LRU list to track unevictable
+pages and to hide these pages from vmscan. This mechanism is based on a patch
+by Larry Woodman of Red Hat to address several scalability problems with page
reclaim in Linux. The problems have been observed at customer sites on large
-memory x86_64 systems. For example, a non-numal x86_64 platform with 128GB
-of main memory will have over 32 million 4k pages in a single zone. When a
-large fraction of these pages are not evictable for any reason [see below],
-vmscan will spend a lot of time scanning the LRU lists looking for the small
-fraction of pages that are evictable. This can result in a situation where
-all cpus are spending 100% of their time in vmscan for hours or days on end,
-with the system completely unresponsive.
+memory x86_64 systems.
-The Unevictable LRU infrastructure addresses the following classes of
-unevictable pages:
+To illustrate this with an example, a non-NUMA x86_64 platform with 128GB of
+main memory will have over 32 million 4k pages in a single zone. When a large
+fraction of these pages are not evictable for any reason [see below], vmscan
+will spend a lot of time scanning the LRU lists looking for the small fraction
+of pages that are evictable. This can result in a situation where all CPUs are
+spending 100% of their time in vmscan for hours or days on end, with the system
+completely unresponsive.
-+ page owned by ramfs
-+ page mapped into SHM_LOCKed shared memory regions
-+ page mapped into VM_LOCKED [mlock()ed] vmas
+The unevictable list addresses the following classes of unevictable pages:
-The infrastructure might be able to handle other conditions that make pages
+ (*) Those owned by ramfs.
+
+ (*) Those mapped into SHM_LOCK'd shared memory regions.
+
+ (*) Those mapped into VM_LOCKED [mlock()ed] VMAs.
+
+The infrastructure may also be able to handle other conditions that make pages
unevictable, either by definition or by circumstance, in the future.
-The Unevictable LRU List
+THE UNEVICTABLE PAGE LIST
+-------------------------
The Unevictable LRU infrastructure consists of an additional, per-zone, LRU list
called the "unevictable" list and an associated page flag, PG_unevictable, to
-indicate that the page is being managed on the unevictable list. The
-PG_unevictable flag is analogous to, and mutually exclusive with, the PG_active
-flag in that it indicates on which LRU list a page resides when PG_lru is set.
-The unevictable LRU list is source configurable based on the UNEVICTABLE_LRU
-Kconfig option.
+indicate that the page is being managed on the unevictable list.
+
+The PG_unevictable flag is analogous to, and mutually exclusive with, the
+PG_active flag in that it indicates on which LRU list a page resides when
+PG_lru is set. The unevictable list is compile-time configurable based on the
+UNEVICTABLE_LRU Kconfig option.
The Unevictable LRU infrastructure maintains unevictable pages on an additional
LRU list for a few reasons:
-1) We get to "treat unevictable pages just like we treat other pages in the
- system, which means we get to use the same code to manipulate them, the
- same code to isolate them (for migrate, etc.), the same code to keep track
- of the statistics, etc..." [Rik van Riel]
+ (1) We get to "treat unevictable pages just like we treat other pages in the
+ system - which means we get to use the same code to manipulate them, the
+ same code to isolate them (for migrate, etc.), the same code to keep track
+ of the statistics, etc..." [Rik van Riel]
-2) We want to be able to migrate unevictable pages between nodes--for memory
- defragmentation, workload management and memory hotplug. The linux kernel
- can only migrate pages that it can successfully isolate from the lru lists.
- If we were to maintain pages elsewise than on an lru-like list, where they
- can be found by isolate_lru_page(), we would prevent their migration, unless
- we reworked migration code to find the unevictable pages.
+ (2) We want to be able to migrate unevictable pages between nodes for memory
+ defragmentation, workload management and memory hotplug. The linux kernel
+ can only migrate pages that it can successfully isolate from the LRU
+ lists. If we were to maintain pages elsewhere than on an LRU-like list,
+ where they can be found by isolate_lru_page(), we would prevent their
+ migration, unless we reworked migration code to find the unevictable pages
+ itself.
-The unevictable LRU list does not differentiate between file backed and swap
-backed [anon] pages. This differentiation is only important while the pages
-are, in fact, evictable.
+The unevictable list does not differentiate between file-backed and anonymous,
+swap-backed pages. This differentiation is only important while the pages are,
+in fact, evictable.
-The unevictable LRU list benefits from the "arrayification" of the per-zone
-LRU lists and statistics originally proposed and posted by Christoph Lameter.
+The unevictable list benefits from the "arrayification" of the per-zone LRU
+lists and statistics originally proposed and posted by Christoph Lameter.
-The unevictable list does not use the lru pagevec mechanism. Rather,
-unevictable pages are placed directly on the page's zone's unevictable
-list under the zone lru_lock. The reason for this is to prevent stranding
-of pages on the unevictable list when one task has the page isolated from the
-lru and other tasks are changing the "evictability" state of the page.
+The unevictable list does not use the LRU pagevec mechanism. Rather,
+unevictable pages are placed directly on the page's zone's unevictable list
+under the zone lru_lock. This allows us to prevent the stranding of pages on
+the unevictable list when one task has the page isolated from the LRU and other
+tasks are changing the "evictability" state of the page.
-Unevictable LRU and Memory Controller Interaction
+MEMORY CONTROL GROUP INTERACTION
+--------------------------------
-The memory controller data structure automatically gets a per zone unevictable
-lru list as a result of the "arrayification" of the per-zone LRU lists. The
-memory controller tracks the movement of pages to and from the unevictable list.
+The unevictable LRU facility interacts with the memory control group [aka
+memory controller; see Documentation/cgroups/memory.txt] by extending the
+lru_list enum.
+
+The memory controller data structure automatically gets a per-zone unevictable
+list as a result of the "arrayification" of the per-zone LRU lists (one per
+lru_list enum element). The memory controller tracks the movement of pages to
+and from the unevictable list.
+
When a memory control group comes under memory pressure, the controller will
not attempt to reclaim pages on the unevictable list. This has a couple of
-effects. Because the pages are "hidden" from reclaim on the unevictable list,
-the reclaim process can be more efficient, dealing only with pages that have
-a chance of being reclaimed. On the other hand, if too many of the pages
-charged to the control group are unevictable, the evictable portion of the
-working set of the tasks in the control group may not fit into the available
-memory. This can cause the control group to thrash or to oom-kill tasks.
+effects:
+
+ (1) Because the pages are "hidden" from reclaim on the unevictable list, the
+ reclaim process can be more efficient, dealing only with pages that have a
+ chance of being reclaimed.
+
+ (2) On the other hand, if too many of the pages charged to the control group
+ are unevictable, the evictable portion of the working set of the tasks in
+ the control group may not fit into the available memory. This can cause
+ the control group to thrash or to OOM-kill tasks.
-Unevictable LRU: Detecting Unevictable Pages
+MARKING ADDRESS SPACES UNEVICTABLE
+----------------------------------
-The function page_evictable(page, vma) in vmscan.c determines whether a
-page is evictable or not. For ramfs pages and pages in SHM_LOCKed regions,
-page_evictable() tests a new address space flag, AS_UNEVICTABLE, in the page's
-address space using a wrapper function. Wrapper functions are used to set,
-clear and test the flag to reduce the requirement for #ifdef's throughout the
-source code. AS_UNEVICTABLE is set on ramfs inode/mapping when it is created.
-This flag remains for the life of the inode.
+For facilities such as ramfs none of the pages attached to the address space
+may be evicted. To prevent eviction of any such pages, the AS_UNEVICTABLE
+address space flag is provided, and this can be manipulated by a filesystem
+using a number of wrapper functions:
-For shared memory regions, AS_UNEVICTABLE is set when an application
-successfully SHM_LOCKs the region and is removed when the region is
-SHM_UNLOCKed. Note that shmctl(SHM_LOCK, ...) does not populate the page
-tables for the region as does, for example, mlock(). So, we make no special
-effort to push any pages in the SHM_LOCKed region to the unevictable list.
-Vmscan will do this when/if it encounters the pages during reclaim. On
-SHM_UNLOCK, shmctl() scans the pages in the region and "rescues" them from the
-unevictable list if no other condition keeps them unevictable. If a SHM_LOCKed
-region is destroyed, the pages are also "rescued" from the unevictable list in
-the process of freeing them.
+ (*) void mapping_set_unevictable(struct address_space *mapping);
-page_evictable() detects mlock()ed pages by testing an additional page flag,
-PG_mlocked via the PageMlocked() wrapper. If the page is NOT mlocked, and a
-non-NULL vma is supplied, page_evictable() will check whether the vma is
+ Mark the address space as being completely unevictable.
+
+ (*) void mapping_clear_unevictable(struct address_space *mapping);
+
+ Mark the address space as being evictable.
+
+ (*) int mapping_unevictable(struct address_space *mapping);
+
+ Query the address space, and return true if it is completely
+ unevictable.
+
+These are currently used in two places in the kernel:
+
+ (1) By ramfs to mark the address spaces of its inodes when they are created,
+ and this mark remains for the life of the inode.
+
+ (2) By SYSV SHM to mark SHM_LOCK'd address spaces until SHM_UNLOCK is called.
+
+ Note that SHM_LOCK is not required to page in the locked pages if they're
+ swapped out; the application must touch the pages manually if it wants to
+ ensure they're in memory.
+
+
+DETECTING UNEVICTABLE PAGES
+---------------------------
+
+The function page_evictable() in vmscan.c determines whether a page is
+evictable or not using the query function outlined above [see section "Marking
+address spaces unevictable"] to check the AS_UNEVICTABLE flag.
+
+For address spaces that are so marked after being populated (as SHM regions
+might be), the lock action (eg: SHM_LOCK) can be lazy, and need not populate
+the page tables for the region as does, for example, mlock(), nor need it make
+any special effort to push any pages in the SHM_LOCK'd area to the unevictable
+list. Instead, vmscan will do this if and when it encounters the pages during
+a reclamation scan.
+
+On an unlock action (such as SHM_UNLOCK), the unlocker (eg: shmctl()) must scan
+the pages in the region and "rescue" them from the unevictable list if no other
+condition is keeping them unevictable. If an unevictable region is destroyed,
+the pages are also "rescued" from the unevictable list in the process of
+freeing them.
+
+page_evictable() also checks for mlocked pages by testing an additional page
+flag, PG_mlocked (as wrapped by PageMlocked()). If the page is NOT mlocked,
+and a non-NULL VMA is supplied, page_evictable() will check whether the VMA is
VM_LOCKED via is_mlocked_vma(). is_mlocked_vma() will SetPageMlocked() and
update the appropriate statistics if the vma is VM_LOCKED. This method allows
efficient "culling" of pages in the fault path that are being faulted in to
-VM_LOCKED vmas.
+VM_LOCKED VMAs.
-Unevictable Pages and Vmscan [shrink_*_list()]
+VMSCAN'S HANDLING OF UNEVICTABLE PAGES
+--------------------------------------
If unevictable pages are culled in the fault path, or moved to the unevictable
-list at mlock() or mmap() time, vmscan will never encounter the pages until
-they have become evictable again, for example, via munlock() and have been
-"rescued" from the unevictable list. However, there may be situations where we
-decide, for the sake of expediency, to leave a unevictable page on one of the
-regular active/inactive LRU lists for vmscan to deal with. Vmscan checks for
-such pages in all of the shrink_{active|inactive|page}_list() functions and
-will "cull" such pages that it encounters--that is, it diverts those pages to
-the unevictable list for the zone being scanned.
+list at mlock() or mmap() time, vmscan will not encounter the pages until they
+have become evictable again (via munlock() for example) and have been "rescued"
+from the unevictable list. However, there may be situations where we decide,
+for the sake of expediency, to leave a unevictable page on one of the regular
+active/inactive LRU lists for vmscan to deal with. vmscan checks for such
+pages in all of the shrink_{active|inactive|page}_list() functions and will
+"cull" such pages that it encounters: that is, it diverts those pages to the
+unevictable list for the zone being scanned.
-There may be situations where a page is mapped into a VM_LOCKED vma, but the
-page is not marked as PageMlocked. Such pages will make it all the way to
+There may be situations where a page is mapped into a VM_LOCKED VMA, but the
+page is not marked as PG_mlocked. Such pages will make it all the way to
shrink_page_list() where they will be detected when vmscan walks the reverse
-map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK, shrink_page_list()
-will cull the page at that point.
+map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK,
+shrink_page_list() will cull the page at that point.
-To "cull" an unevictable page, vmscan simply puts the page back on the lru
-list using putback_lru_page()--the inverse operation to isolate_lru_page()--
-after dropping the page lock. Because the condition which makes the page
-unevictable may change once the page is unlocked, putback_lru_page() will
-recheck the unevictable state of a page that it places on the unevictable lru
-list. If the page has become unevictable, putback_lru_page() removes it from
-the list and retries, including the page_unevictable() test. Because such a
-race is a rare event and movement of pages onto the unevictable list should be
-rare, these extra evictabilty checks should not occur in the majority of calls
-to putback_lru_page().
+To "cull" an unevictable page, vmscan simply puts the page back on the LRU list
+using putback_lru_page() - the inverse operation to isolate_lru_page() - after
+dropping the page lock. Because the condition which makes the page unevictable
+may change once the page is unlocked, putback_lru_page() will recheck the
+unevictable state of a page that it places on the unevictable list. If the
+page has become unevictable, putback_lru_page() removes it from the list and
+retries, including the page_unevictable() test. Because such a race is a rare
+event and movement of pages onto the unevictable list should be rare, these
+extra evictabilty checks should not occur in the majority of calls to
+putback_lru_page().
-Mlocked Page: Prior Work
+=============
+MLOCKED PAGES
+=============
-The "Unevictable Mlocked Pages" infrastructure is based on work originally
+The unevictable page list is also useful for mlock(), in addition to ramfs and
+SYSV SHM. Note that mlock() is only available in CONFIG_MMU=y situations; in
+NOMMU situations, all mappings are effectively mlocked.
+
+
+HISTORY
+-------
+
+The "Unevictable mlocked Pages" infrastructure is based on work originally
posted by Nick Piggin in an RFC patch entitled "mm: mlocked pages off LRU".
-Nick posted his patch as an alternative to a patch posted by Christoph
-Lameter to achieve the same objective--hiding mlocked pages from vmscan.
-In Nick's patch, he used one of the struct page lru list link fields as a count
-of VM_LOCKED vmas that map the page. This use of the link field for a count
-prevented the management of the pages on an LRU list. Thus, mlocked pages were
-not migratable as isolate_lru_page() could not find them and the lru list link
-field was not available to the migration subsystem. Nick resolved this by
-putting mlocked pages back on the lru list before attempting to isolate them,
-thus abandoning the count of VM_LOCKED vmas. When Nick's patch was integrated
-with the Unevictable LRU work, the count was replaced by walking the reverse
-map to determine whether any VM_LOCKED vmas mapped the page. More on this
-below.
+Nick posted his patch as an alternative to a patch posted by Christoph Lameter
+to achieve the same objective: hiding mlocked pages from vmscan.
+
+In Nick's patch, he used one of the struct page LRU list link fields as a count
+of VM_LOCKED VMAs that map the page. This use of the link field for a count
+prevented the management of the pages on an LRU list, and thus mlocked pages
+were not migratable as isolate_lru_page() could not find them, and the LRU list
+link field was not available to the migration subsystem.
+
+Nick resolved this by putting mlocked pages back on the lru list before
+attempting to isolate them, thus abandoning the count of VM_LOCKED VMAs. When
+Nick's patch was integrated with the Unevictable LRU work, the count was
+replaced by walking the reverse map to determine whether any VM_LOCKED VMAs
+mapped the page. More on this below.
-Mlocked Pages: Basic Management
+BASIC MANAGEMENT
+----------------
-Mlocked pages--pages mapped into a VM_LOCKED vma--represent one class of
-unevictable pages. When such a page has been "noticed" by the memory
-management subsystem, the page is marked with the PG_mlocked [PageMlocked()]
-flag. A PageMlocked() page will be placed on the unevictable LRU list when
-it is added to the LRU. Pages can be "noticed" by memory management in
-several places:
+mlocked pages - pages mapped into a VM_LOCKED VMA - are a class of unevictable
+pages. When such a page has been "noticed" by the memory management subsystem,
+the page is marked with the PG_mlocked flag. This can be manipulated using the
+PageMlocked() functions.
-1) in the mlock()/mlockall() system call handlers.
-2) in the mmap() system call handler when mmap()ing a region with the
- MAP_LOCKED flag, or mmap()ing a region in a task that has called
- mlockall() with the MCL_FUTURE flag. Both of these conditions result
- in the VM_LOCKED flag being set for the vma.
-3) in the fault path, if mlocked pages are "culled" in the fault path,
- and when a VM_LOCKED stack segment is expanded.
-4) as mentioned above, in vmscan:shrink_page_list() when attempting to
- reclaim a page in a VM_LOCKED vma via try_to_unmap().
+A PG_mlocked page will be placed on the unevictable list when it is added to
+the LRU. Such pages can be "noticed" by memory management in several places:
-Mlocked pages become unlocked and rescued from the unevictable list when:
+ (1) in the mlock()/mlockall() system call handlers;
-1) mapped in a range unlocked via the munlock()/munlockall() system calls.
-2) munmapped() out of the last VM_LOCKED vma that maps the page, including
- unmapping at task exit.
-3) when the page is truncated from the last VM_LOCKED vma of an mmap()ed file.
-4) before a page is COWed in a VM_LOCKED vma.
+ (2) in the mmap() system call handler when mmapping a region with the
+ MAP_LOCKED flag;
+
+ (3) mmapping a region in a task that has called mlockall() with the MCL_FUTURE
+ flag
+
+ (4) in the fault path, if mlocked pages are "culled" in the fault path,
+ and when a VM_LOCKED stack segment is expanded; or
+
+ (5) as mentioned above, in vmscan:shrink_page_list() when attempting to
+ reclaim a page in a VM_LOCKED VMA via try_to_unmap()
+
+all of which result in the VM_LOCKED flag being set for the VMA if it doesn't
+already have it set.
+
+mlocked pages become unlocked and rescued from the unevictable list when:
+
+ (1) mapped in a range unlocked via the munlock()/munlockall() system calls;
+
+ (2) munmap()'d out of the last VM_LOCKED VMA that maps the page, including
+ unmapping at task exit;
+
+ (3) when the page is truncated from the last VM_LOCKED VMA of an mmapped file;
+ or
+
+ (4) before a page is COW'd in a VM_LOCKED VMA.
-Mlocked Pages: mlock()/mlockall() System Call Handling
+mlock()/mlockall() SYSTEM CALL HANDLING
+---------------------------------------
Both [do_]mlock() and [do_]mlockall() system call handlers call mlock_fixup()
-for each vma in the range specified by the call. In the case of mlockall(),
+for each VMA in the range specified by the call. In the case of mlockall(),
this is the entire active address space of the task. Note that mlock_fixup()
-is used for both mlock()ing and munlock()ing a range of memory. A call to
-mlock() an already VM_LOCKED vma, or to munlock() a vma that is not VM_LOCKED
-is treated as a no-op--mlock_fixup() simply returns.
+is used for both mlocking and munlocking a range of memory. A call to mlock()
+an already VM_LOCKED VMA, or to munlock() a VMA that is not VM_LOCKED is
+treated as a no-op, and mlock_fixup() simply returns.
-If the vma passes some filtering described in "Mlocked Pages: Filtering Vmas"
-below, mlock_fixup() will attempt to merge the vma with its neighbors or split
-off a subset of the vma if the range does not cover the entire vma. Once the
-vma has been merged or split or neither, mlock_fixup() will call
-__mlock_vma_pages_range() to fault in the pages via get_user_pages() and
-to mark the pages as mlocked via mlock_vma_page().
+If the VMA passes some filtering as described in "Filtering Special Vmas"
+below, mlock_fixup() will attempt to merge the VMA with its neighbors or split
+off a subset of the VMA if the range does not cover the entire VMA. Once the
+VMA has been merged or split or neither, mlock_fixup() will call
+__mlock_vma_pages_range() to fault in the pages via get_user_pages() and to
+mark the pages as mlocked via mlock_vma_page().
-Note that the vma being mlocked might be mapped with PROT_NONE. In this case,
-get_user_pages() will be unable to fault in the pages. That's OK. If pages
-do end up getting faulted into this VM_LOCKED vma, we'll handle them in the
+Note that the VMA being mlocked might be mapped with PROT_NONE. In this case,
+get_user_pages() will be unable to fault in the pages. That's okay. If pages
+do end up getting faulted into this VM_LOCKED VMA, we'll handle them in the
fault path or in vmscan.
Also note that a page returned by get_user_pages() could be truncated or
-migrated out from under us, while we're trying to mlock it. To detect
-this, __mlock_vma_pages_range() tests the page_mapping after acquiring
-the page lock. If the page is still associated with its mapping, we'll
-go ahead and call mlock_vma_page(). If the mapping is gone, we just
-unlock the page and move on. Worse case, this results in page mapped
-in a VM_LOCKED vma remaining on a normal LRU list without being
-PageMlocked(). Again, vmscan will detect and cull such pages.
+migrated out from under us, while we're trying to mlock it. To detect this,
+__mlock_vma_pages_range() checks page_mapping() after acquiring the page lock.
+If the page is still associated with its mapping, we'll go ahead and call
+mlock_vma_page(). If the mapping is gone, we just unlock the page and move on.
+In the worst case, this will result in a page mapped in a VM_LOCKED VMA
+remaining on a normal LRU list without being PageMlocked(). Again, vmscan will
+detect and cull such pages.
-mlock_vma_page(), called with the page locked [N.B., not "mlocked"], will
-TestSetPageMlocked() for each page returned by get_user_pages(). We use
-TestSetPageMlocked() because the page might already be mlocked by another
-task/vma and we don't want to do extra work. We especially do not want to
-count an mlocked page more than once in the statistics. If the page was
-already mlocked, mlock_vma_page() is done.
+mlock_vma_page() will call TestSetPageMlocked() for each page returned by
+get_user_pages(). We use TestSetPageMlocked() because the page might already
+be mlocked by another task/VMA and we don't want to do extra work. We
+especially do not want to count an mlocked page more than once in the
+statistics. If the page was already mlocked, mlock_vma_page() need do nothing
+more.
If the page was NOT already mlocked, mlock_vma_page() attempts to isolate the
page from the LRU, as it is likely on the appropriate active or inactive list
-at that time. If the isolate_lru_page() succeeds, mlock_vma_page() will
-putback the page--putback_lru_page()--which will notice that the page is now
-mlocked and divert the page to the zone's unevictable LRU list. If
+at that time. If the isolate_lru_page() succeeds, mlock_vma_page() will put
+back the page - by calling putback_lru_page() - which will notice that the page
+is now mlocked and divert the page to the zone's unevictable list. If
mlock_vma_page() is unable to isolate the page from the LRU, vmscan will handle
-it later if/when it attempts to reclaim the page.
+it later if and when it attempts to reclaim the page.
-Mlocked Pages: Filtering Special Vmas
+FILTERING SPECIAL VMAS
+----------------------
-mlock_fixup() filters several classes of "special" vmas:
+mlock_fixup() filters several classes of "special" VMAs:
-1) vmas with VM_IO|VM_PFNMAP set are skipped entirely. The pages behind
+1) VMAs with VM_IO or VM_PFNMAP set are skipped entirely. The pages behind
these mappings are inherently pinned, so we don't need to mark them as
- mlocked. In any case, most of the pages have no struct page in which to
- so mark the page. Because of this, get_user_pages() will fail for these
- vmas, so there is no sense in attempting to visit them.
+ mlocked. In any case, most of the pages have no struct page in which to so
+ mark the page. Because of this, get_user_pages() will fail for these VMAs,
+ so there is no sense in attempting to visit them.
-2) vmas mapping hugetlbfs page are already effectively pinned into memory.
- We don't need nor want to mlock() these pages. However, to preserve the
- prior behavior of mlock()--before the unevictable/mlock changes--
- mlock_fixup() will call make_pages_present() in the hugetlbfs vma range
- to allocate the huge pages and populate the ptes.
+2) VMAs mapping hugetlbfs page are already effectively pinned into memory. We
+ neither need nor want to mlock() these pages. However, to preserve the
+ prior behavior of mlock() - before the unevictable/mlock changes -
+ mlock_fixup() will call make_pages_present() in the hugetlbfs VMA range to
+ allocate the huge pages and populate the ptes.
-3) vmas with VM_DONTEXPAND|VM_RESERVED are generally user space mappings of
- kernel pages, such as the vdso page, relay channel pages, etc. These pages
+3) VMAs with VM_DONTEXPAND or VM_RESERVED are generally userspace mappings of
+ kernel pages, such as the VDSO page, relay channel pages, etc. These pages
are inherently unevictable and are not managed on the LRU lists.
- mlock_fixup() treats these vmas the same as hugetlbfs vmas. It calls
+ mlock_fixup() treats these VMAs the same as hugetlbfs VMAs. It calls
make_pages_present() to populate the ptes.
-Note that for all of these special vmas, mlock_fixup() does not set the
+Note that for all of these special VMAs, mlock_fixup() does not set the
VM_LOCKED flag. Therefore, we won't have to deal with them later during
-munlock() or munmap()--for example, at task exit. Neither does mlock_fixup()
-account these vmas against the task's "locked_vm".
-
-Mlocked Pages: Downgrading the Mmap Semaphore.
-
-mlock_fixup() must be called with the mmap semaphore held for write, because
-it may have to merge or split vmas. However, mlocking a large region of
-memory can take a long time--especially if vmscan must reclaim pages to
-satisfy the regions requirements. Faulting in a large region with the mmap
-semaphore held for write can hold off other faults on the address space, in
-the case of a multi-threaded task. It can also hold off scans of the task's
-address space via /proc. While testing under heavy load, it was observed that
-the ps(1) command could be held off for many minutes while a large segment was
-mlock()ed down.
-
-To address this issue, and to make the system more responsive during mlock()ing
-of large segments, mlock_fixup() downgrades the mmap semaphore to read mode
-during the call to __mlock_vma_pages_range(). This works fine. However, the
-callers of mlock_fixup() expect the semaphore to be returned in write mode.
-So, mlock_fixup() "upgrades" the semphore to write mode. Linux does not
-support an atomic upgrade_sem() call, so mlock_fixup() must drop the semaphore
-and reacquire it in write mode. In a multi-threaded task, it is possible for
-the task memory map to change while the semaphore is dropped. Therefore,
-mlock_fixup() looks up the vma at the range start address after reacquiring
-the semaphore in write mode and verifies that it still covers the original
-range. If not, mlock_fixup() returns an error [-EAGAIN]. All callers of
-mlock_fixup() have been changed to deal with this new error condition.
-
-Note: when munlocking a region, all of the pages should already be resident--
-unless we have racing threads mlocking() and munlocking() regions. So,
-unlocking should not have to wait for page allocations nor faults of any kind.
-Therefore mlock_fixup() does not downgrade the semaphore for munlock().
+munlock(), munmap() or task exit. Neither does mlock_fixup() account these
+VMAs against the task's "locked_vm".
-Mlocked Pages: munlock()/munlockall() System Call Handling
+munlock()/munlockall() SYSTEM CALL HANDLING
+-------------------------------------------
-The munlock() and munlockall() system calls are handled by the same functions--
-do_mlock[all]()--as the mlock() and mlockall() system calls with the unlock
-vs lock operation indicated by an argument. So, these system calls are also
-handled by mlock_fixup(). Again, if called for an already munlock()ed vma,
-mlock_fixup() simply returns. Because of the vma filtering discussed above,
-VM_LOCKED will not be set in any "special" vmas. So, these vmas will be
+The munlock() and munlockall() system calls are handled by the same functions -
+do_mlock[all]() - as the mlock() and mlockall() system calls with the unlock vs
+lock operation indicated by an argument. So, these system calls are also
+handled by mlock_fixup(). Again, if called for an already munlocked VMA,
+mlock_fixup() simply returns. Because of the VMA filtering discussed above,
+VM_LOCKED will not be set in any "special" VMAs. So, these VMAs will be
ignored for munlock.
-If the vma is VM_LOCKED, mlock_fixup() again attempts to merge or split off
-the specified range. The range is then munlocked via the function
-__mlock_vma_pages_range()--the same function used to mlock a vma range--
+If the VMA is VM_LOCKED, mlock_fixup() again attempts to merge or split off the
+specified range. The range is then munlocked via the function
+__mlock_vma_pages_range() - the same function used to mlock a VMA range -
passing a flag to indicate that munlock() is being performed.
-Because the vma access protections could have been changed to PROT_NONE after
+Because the VMA access protections could have been changed to PROT_NONE after
faulting in and mlocking pages, get_user_pages() was unreliable for visiting
-these pages for munlocking. Because we don't want to leave pages mlocked(),
+these pages for munlocking. Because we don't want to leave pages mlocked,
get_user_pages() was enhanced to accept a flag to ignore the permissions when
-fetching the pages--all of which should be resident as a result of previous
-mlock()ing.
+fetching the pages - all of which should be resident as a result of previous
+mlocking.
For munlock(), __mlock_vma_pages_range() unlocks individual pages by calling
munlock_vma_page(). munlock_vma_page() unconditionally clears the PG_mlocked
-flag using TestClearPageMlocked(). As with mlock_vma_page(), munlock_vma_page()
-use the Test*PageMlocked() function to handle the case where the page might
-have already been unlocked by another task. If the page was mlocked,
-munlock_vma_page() updates that zone statistics for the number of mlocked
-pages. Note, however, that at this point we haven't checked whether the page
-is mapped by other VM_LOCKED vmas.
+flag using TestClearPageMlocked(). As with mlock_vma_page(),
+munlock_vma_page() use the Test*PageMlocked() function to handle the case where
+the page might have already been unlocked by another task. If the page was
+mlocked, munlock_vma_page() updates that zone statistics for the number of
+mlocked pages. Note, however, that at this point we haven't checked whether
+the page is mapped by other VM_LOCKED VMAs.
-We can't call try_to_munlock(), the function that walks the reverse map to check
-for other VM_LOCKED vmas, without first isolating the page from the LRU.
+We can't call try_to_munlock(), the function that walks the reverse map to
+check for other VM_LOCKED VMAs, without first isolating the page from the LRU.
try_to_munlock() is a variant of try_to_unmap() and thus requires that the page
-not be on an lru list. [More on these below.] However, the call to
-isolate_lru_page() could fail, in which case we couldn't try_to_munlock().
-So, we go ahead and clear PG_mlocked up front, as this might be the only chance
-we have. If we can successfully isolate the page, we go ahead and
+not be on an LRU list [more on these below]. However, the call to
+isolate_lru_page() could fail, in which case we couldn't try_to_munlock(). So,
+we go ahead and clear PG_mlocked up front, as this might be the only chance we
+have. If we can successfully isolate the page, we go ahead and
try_to_munlock(), which will restore the PG_mlocked flag and update the zone
-page statistics if it finds another vma holding the page mlocked. If we fail
+page statistics if it finds another VMA holding the page mlocked. If we fail
to isolate the page, we'll have left a potentially mlocked page on the LRU.
-This is fine, because we'll catch it later when/if vmscan tries to reclaim the
-page. This should be relatively rare.
-
-Mlocked Pages: Migrating Them...
-
-A page that is being migrated has been isolated from the lru lists and is
-held locked across unmapping of the page, updating the page's mapping
-[address_space] entry and copying the contents and state, until the
-page table entry has been replaced with an entry that refers to the new
-page. Linux supports migration of mlocked pages and other unevictable
-pages. This involves simply moving the PageMlocked and PageUnevictable states
-from the old page to the new page.
-
-Note that page migration can race with mlocking or munlocking of the same
-page. This has been discussed from the mlock/munlock perspective in the
-respective sections above. Both processes [migration, m[un]locking], hold
-the page locked. This provides the first level of synchronization. Page
-migration zeros out the page_mapping of the old page before unlocking it,
-so m[un]lock can skip these pages by testing the page mapping under page
-lock.
-
-When completing page migration, we place the new and old pages back onto the
-lru after dropping the page lock. The "unneeded" page--old page on success,
-new page on failure--will be freed when the reference count held by the
-migration process is released. To ensure that we don't strand pages on the
-unevictable list because of a race between munlock and migration, page
-migration uses the putback_lru_page() function to add migrated pages back to
-the lru.
+This is fine, because we'll catch it later if and if vmscan tries to reclaim
+the page. This should be relatively rare.
-Mlocked Pages: mmap(MAP_LOCKED) System Call Handling
+MIGRATING MLOCKED PAGES
+-----------------------
+
+A page that is being migrated has been isolated from the LRU lists and is held
+locked across unmapping of the page, updating the page's address space entry
+and copying the contents and state, until the page table entry has been
+replaced with an entry that refers to the new page. Linux supports migration
+of mlocked pages and other unevictable pages. This involves simply moving the
+PG_mlocked and PG_unevictable states from the old page to the new page.
+
+Note that page migration can race with mlocking or munlocking of the same page.
+This has been discussed from the mlock/munlock perspective in the respective
+sections above. Both processes (migration and m[un]locking) hold the page
+locked. This provides the first level of synchronization. Page migration
+zeros out the page_mapping of the old page before unlocking it, so m[un]lock
+can skip these pages by testing the page mapping under page lock.
+
+To complete page migration, we place the new and old pages back onto the LRU
+after dropping the page lock. The "unneeded" page - old page on success, new
+page on failure - will be freed when the reference count held by the migration
+process is released. To ensure that we don't strand pages on the unevictable
+list because of a race between munlock and migration, page migration uses the
+putback_lru_page() function to add migrated pages back to the LRU.
+
+
+mmap(MAP_LOCKED) SYSTEM CALL HANDLING
+-------------------------------------
In addition the the mlock()/mlockall() system calls, an application can request
-that a region of memory be mlocked using the MAP_LOCKED flag with the mmap()
+that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
-in the newly mapped memory being mlocked. Before the unevictable/mlock changes,
-the kernel simply called make_pages_present() to allocate pages and populate
-the page table.
+in the newly mapped memory being mlocked. Before the unevictable/mlock
+changes, the kernel simply called make_pages_present() to allocate pages and
+populate the page table.
To mlock a range of memory under the unevictable/mlock infrastructure, the
mmap() handler and task address space expansion functions call
mlock_vma_pages_range() specifying the vma and the address range to mlock.
-mlock_vma_pages_range() filters vmas like mlock_fixup(), as described above in
-"Mlocked Pages: Filtering Vmas". It will clear the VM_LOCKED flag, which will
-have already been set by the caller, in filtered vmas. Thus these vma's need
-not be visited for munlock when the region is unmapped.
+mlock_vma_pages_range() filters VMAs like mlock_fixup(), as described above in
+"Filtering Special VMAs". It will clear the VM_LOCKED flag, which will have
+already been set by the caller, in filtered VMAs. Thus these VMA's need not be
+visited for munlock when the region is unmapped.
-For "normal" vmas, mlock_vma_pages_range() calls __mlock_vma_pages_range() to
+For "normal" VMAs, mlock_vma_pages_range() calls __mlock_vma_pages_range() to
fault/allocate the pages and mlock them. Again, like mlock_fixup(),
mlock_vma_pages_range() downgrades the mmap semaphore to read mode before
-attempting to fault/allocate and mlock the pages; and "upgrades" the semaphore
+attempting to fault/allocate and mlock the pages and "upgrades" the semaphore
back to write mode before returning.
-The callers of mlock_vma_pages_range() will have already added the memory
-range to be mlocked to the task's "locked_vm". To account for filtered vmas,
+The callers of mlock_vma_pages_range() will have already added the memory range
+to be mlocked to the task's "locked_vm". To account for filtered VMAs,
mlock_vma_pages_range() returns the number of pages NOT mlocked. All of the
-callers then subtract a non-negative return value from the task's locked_vm.
-A negative return value represent an error--for example, from get_user_pages()
-attempting to fault in a vma with PROT_NONE access. In this case, we leave
-the memory range accounted as locked_vm, as the protections could be changed
-later and pages allocated into that region.
+callers then subtract a non-negative return value from the task's locked_vm. A
+negative return value represent an error - for example, from get_user_pages()
+attempting to fault in a VMA with PROT_NONE access. In this case, we leave the
+memory range accounted as locked_vm, as the protections could be changed later
+and pages allocated into that region.
-Mlocked Pages: munmap()/exit()/exec() System Call Handling
+munmap()/exit()/exec() SYSTEM CALL HANDLING
+-------------------------------------------
When unmapping an mlocked region of memory, whether by an explicit call to
munmap() or via an internal unmap from exit() or exec() processing, we must
-munlock the pages if we're removing the last VM_LOCKED vma that maps the pages.
+munlock the pages if we're removing the last VM_LOCKED VMA that maps the pages.
Before the unevictable/mlock changes, mlocking did not mark the pages in any
way, so unmapping them required no processing.
To munlock a range of memory under the unevictable/mlock infrastructure, the
-munmap() hander and task address space tear down function call
+munmap() handler and task address space call tear down function
munlock_vma_pages_all(). The name reflects the observation that one always
-specifies the entire vma range when munlock()ing during unmap of a region.
-Because of the vma filtering when mlocking() regions, only "normal" vmas that
+specifies the entire VMA range when munlock()ing during unmap of a region.
+Because of the VMA filtering when mlocking() regions, only "normal" VMAs that
actually contain mlocked pages will be passed to munlock_vma_pages_all().
-munlock_vma_pages_all() clears the VM_LOCKED vma flag and, like mlock_fixup()
+munlock_vma_pages_all() clears the VM_LOCKED VMA flag and, like mlock_fixup()
for the munlock case, calls __munlock_vma_pages_range() to walk the page table
-for the vma's memory range and munlock_vma_page() each resident page mapped by
-the vma. This effectively munlocks the page, only if this is the last
-VM_LOCKED vma that maps the page.
+for the VMA's memory range and munlock_vma_page() each resident page mapped by
+the VMA. This effectively munlocks the page, only if this is the last
+VM_LOCKED VMA that maps the page.
-Mlocked Page: try_to_unmap()
+try_to_unmap()
+--------------
-[Note: the code changes represented by this section are really quite small
-compared to the text to describe what happening and why, and to discuss the
-implications.]
-
-Pages can, of course, be mapped into multiple vmas. Some of these vmas may
+Pages can, of course, be mapped into multiple VMAs. Some of these VMAs may
have VM_LOCKED flag set. It is possible for a page mapped into one or more
-VM_LOCKED vmas not to have the PG_mlocked flag set and therefore reside on one
-of the active or inactive LRU lists. This could happen if, for example, a
-task in the process of munlock()ing the page could not isolate the page from
-the LRU. As a result, vmscan/shrink_page_list() might encounter such a page
-as described in "Unevictable Pages and Vmscan [shrink_*_list()]". To
-handle this situation, try_to_unmap() has been enhanced to check for VM_LOCKED
-vmas while it is walking a page's reverse map.
+VM_LOCKED VMAs not to have the PG_mlocked flag set and therefore reside on one
+of the active or inactive LRU lists. This could happen if, for example, a task
+in the process of munlocking the page could not isolate the page from the LRU.
+As a result, vmscan/shrink_page_list() might encounter such a page as described
+in section "vmscan's handling of unevictable pages". To handle this situation,
+try_to_unmap() checks for VM_LOCKED VMAs while it is walking a page's reverse
+map.
try_to_unmap() is always called, by either vmscan for reclaim or for page
-migration, with the argument page locked and isolated from the LRU. BUG_ON()
-assertions enforce this requirement. Separate functions handle anonymous and
-mapped file pages, as these types of pages have different reverse map
-mechanisms.
+migration, with the argument page locked and isolated from the LRU. Separate
+functions handle anonymous and mapped file pages, as these types of pages have
+different reverse map mechanisms.
- try_to_unmap_anon()
+ (*) try_to_unmap_anon()
-To unmap anonymous pages, each vma in the list anchored in the anon_vma must be
-visited--at least until a VM_LOCKED vma is encountered. If the page is being
-unmapped for migration, VM_LOCKED vmas do not stop the process because mlocked
-pages are migratable. However, for reclaim, if the page is mapped into a
-VM_LOCKED vma, the scan stops. try_to_unmap() attempts to acquire the mmap
-semphore of the mm_struct to which the vma belongs in read mode. If this is
-successful, try_to_unmap() will mlock the page via mlock_vma_page()--we
-wouldn't have gotten to try_to_unmap() if the page were already mlocked--and
-will return SWAP_MLOCK, indicating that the page is unevictable. If the
-mmap semaphore cannot be acquired, we are not sure whether the page is really
-unevictable or not. In this case, try_to_unmap() will return SWAP_AGAIN.
+ To unmap anonymous pages, each VMA in the list anchored in the anon_vma
+ must be visited - at least until a VM_LOCKED VMA is encountered. If the
+ page is being unmapped for migration, VM_LOCKED VMAs do not stop the
+ process because mlocked pages are migratable. However, for reclaim, if
+ the page is mapped into a VM_LOCKED VMA, the scan stops.
- try_to_unmap_file() -- linear mappings
+ try_to_unmap_anon() attempts to acquire in read mode the mmap semphore of
+ the mm_struct to which the VMA belongs. If this is successful, it will
+ mlock the page via mlock_vma_page() - we wouldn't have gotten to
+ try_to_unmap_anon() if the page were already mlocked - and will return
+ SWAP_MLOCK, indicating that the page is unevictable.
-Unmapping of a mapped file page works the same, except that the scan visits
-all vmas that maps the page's index/page offset in the page's mapping's
-reverse map priority search tree. It must also visit each vma in the page's
-mapping's non-linear list, if the list is non-empty. As for anonymous pages,
-on encountering a VM_LOCKED vma for a mapped file page, try_to_unmap() will
-attempt to acquire the associated mm_struct's mmap semaphore to mlock the page,
-returning SWAP_MLOCK if this is successful, and SWAP_AGAIN, if not.
+ If the mmap semaphore cannot be acquired, we are not sure whether the page
+ is really unevictable or not. In this case, try_to_unmap_anon() will
+ return SWAP_AGAIN.
- try_to_unmap_file() -- non-linear mappings
+ (*) try_to_unmap_file() - linear mappings
-If a page's mapping contains a non-empty non-linear mapping vma list, then
-try_to_un{map|lock}() must also visit each vma in that list to determine
-whether the page is mapped in a VM_LOCKED vma. Again, the scan must visit
-all vmas in the non-linear list to ensure that the pages is not/should not be
-mlocked. If a VM_LOCKED vma is found in the list, the scan could terminate.
-However, there is no easy way to determine whether the page is actually mapped
-in a given vma--either for unmapping or testing whether the VM_LOCKED vma
-actually pins the page.
+ Unmapping of a mapped file page works the same as for anonymous mappings,
+ except that the scan visits all VMAs that map the page's index/page offset
+ in the page's mapping's reverse map priority search tree. It also visits
+ each VMA in the page's mapping's non-linear list, if the list is
+ non-empty.
-So, try_to_unmap_file() handles non-linear mappings by scanning a certain
-number of pages--a "cluster"--in each non-linear vma associated with the page's
-mapping, for each file mapped page that vmscan tries to unmap. If this happens
-to unmap the page we're trying to unmap, try_to_unmap() will notice this on
-return--(page_mapcount(page) == 0)--and return SWAP_SUCCESS. Otherwise, it
-will return SWAP_AGAIN, causing vmscan to recirculate this page. We take
-advantage of the cluster scan in try_to_unmap_cluster() as follows:
+ As for anonymous pages, on encountering a VM_LOCKED VMA for a mapped file
+ page, try_to_unmap_file() will attempt to acquire the associated
+ mm_struct's mmap semaphore to mlock the page, returning SWAP_MLOCK if this
+ is successful, and SWAP_AGAIN, if not.
-For each non-linear vma, try_to_unmap_cluster() attempts to acquire the mmap
-semaphore of the associated mm_struct for read without blocking. If this
-attempt is successful and the vma is VM_LOCKED, try_to_unmap_cluster() will
-retain the mmap semaphore for the scan; otherwise it drops it here. Then,
-for each page in the cluster, if we're holding the mmap semaphore for a locked
-vma, try_to_unmap_cluster() calls mlock_vma_page() to mlock the page. This
-call is a no-op if the page is already locked, but will mlock any pages in
-the non-linear mapping that happen to be unlocked. If one of the pages so
-mlocked is the page passed in to try_to_unmap(), try_to_unmap_cluster() will
-return SWAP_MLOCK, rather than the default SWAP_AGAIN. This will allow vmscan
-to cull the page, rather than recirculating it on the inactive list. Again,
-if try_to_unmap_cluster() cannot acquire the vma's mmap sem, it returns
-SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED vma, but
-couldn't be mlocked.
+ (*) try_to_unmap_file() - non-linear mappings
+
+ If a page's mapping contains a non-empty non-linear mapping VMA list, then
+ try_to_un{map|lock}() must also visit each VMA in that list to determine
+ whether the page is mapped in a VM_LOCKED VMA. Again, the scan must visit
+ all VMAs in the non-linear list to ensure that the pages is not/should not
+ be mlocked.
+
+ If a VM_LOCKED VMA is found in the list, the scan could terminate.
+ However, there is no easy way to determine whether the page is actually
+ mapped in a given VMA - either for unmapping or testing whether the
+ VM_LOCKED VMA actually pins the page.
+
+ try_to_unmap_file() handles non-linear mappings by scanning a certain
+ number of pages - a "cluster" - in each non-linear VMA associated with the
+ page's mapping, for each file mapped page that vmscan tries to unmap. If
+ this happens to unmap the page we're trying to unmap, try_to_unmap() will
+ notice this on return (page_mapcount(page) will be 0) and return
+ SWAP_SUCCESS. Otherwise, it will return SWAP_AGAIN, causing vmscan to
+ recirculate this page. We take advantage of the cluster scan in
+ try_to_unmap_cluster() as follows:
+
+ For each non-linear VMA, try_to_unmap_cluster() attempts to acquire the
+ mmap semaphore of the associated mm_struct for read without blocking.
+
+ If this attempt is successful and the VMA is VM_LOCKED,
+ try_to_unmap_cluster() will retain the mmap semaphore for the scan;
+ otherwise it drops it here.
+
+ Then, for each page in the cluster, if we're holding the mmap semaphore
+ for a locked VMA, try_to_unmap_cluster() calls mlock_vma_page() to
+ mlock the page. This call is a no-op if the page is already locked,
+ but will mlock any pages in the non-linear mapping that happen to be
+ unlocked.
+
+ If one of the pages so mlocked is the page passed in to try_to_unmap(),
+ try_to_unmap_cluster() will return SWAP_MLOCK, rather than the default
+ SWAP_AGAIN. This will allow vmscan to cull the page, rather than
+ recirculating it on the inactive list.
+
+ Again, if try_to_unmap_cluster() cannot acquire the VMA's mmap sem, it
+ returns SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED
+ VMA, but couldn't be mlocked.
-Mlocked pages: try_to_munlock() Reverse Map Scan
+try_to_munlock() REVERSE MAP SCAN
+---------------------------------
-TODO/FIXME: a better name might be page_mlocked()--analogous to the
-page_referenced() reverse map walker.
+ [!] TODO/FIXME: a better name might be page_mlocked() - analogous to the
+ page_referenced() reverse map walker.
-When munlock_vma_page()--see "Mlocked Pages: munlock()/munlockall()
-System Call Handling" above--tries to munlock a page, it needs to
-determine whether or not the page is mapped by any VM_LOCKED vma, without
-actually attempting to unmap all ptes from the page. For this purpose, the
-unevictable/mlock infrastructure introduced a variant of try_to_unmap() called
-try_to_munlock().
+When munlock_vma_page() [see section "munlock()/munlockall() System Call
+Handling" above] tries to munlock a page, it needs to determine whether or not
+the page is mapped by any VM_LOCKED VMA without actually attempting to unmap
+all PTEs from the page. For this purpose, the unevictable/mlock infrastructure
+introduced a variant of try_to_unmap() called try_to_munlock().
try_to_munlock() calls the same functions as try_to_unmap() for anonymous and
mapped file pages with an additional argument specifing unlock versus unmap
processing. Again, these functions walk the respective reverse maps looking
-for VM_LOCKED vmas. When such a vma is found for anonymous pages and file
+for VM_LOCKED VMAs. When such a VMA is found for anonymous pages and file
pages mapped in linear VMAs, as in the try_to_unmap() case, the functions
attempt to acquire the associated mmap semphore, mlock the page via
mlock_vma_page() and return SWAP_MLOCK. This effectively undoes the
pre-clearing of the page's PG_mlocked done by munlock_vma_page.
-If try_to_unmap() is unable to acquire a VM_LOCKED vma's associated mmap
-semaphore, it will return SWAP_AGAIN. This will allow shrink_page_list()
-to recycle the page on the inactive list and hope that it has better luck
-with the page next time.
+If try_to_unmap() is unable to acquire a VM_LOCKED VMA's associated mmap
+semaphore, it will return SWAP_AGAIN. This will allow shrink_page_list() to
+recycle the page on the inactive list and hope that it has better luck with the
+page next time.
-For file pages mapped into non-linear vmas, the try_to_munlock() logic works
-slightly differently. On encountering a VM_LOCKED non-linear vma that might
-map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking
-the page. munlock_vma_page() will just leave the page unlocked and let
-vmscan deal with it--the usual fallback position.
+For file pages mapped into non-linear VMAs, the try_to_munlock() logic works
+slightly differently. On encountering a VM_LOCKED non-linear VMA that might
+map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking the
+page. munlock_vma_page() will just leave the page unlocked and let vmscan deal
+with it - the usual fallback position.
-Note that try_to_munlock()'s reverse map walk must visit every vma in a pages'
-reverse map to determine that a page is NOT mapped into any VM_LOCKED vma.
-However, the scan can terminate when it encounters a VM_LOCKED vma and can
-successfully acquire the vma's mmap semphore for read and mlock the page.
-Although try_to_munlock() can be called many [very many!] times when
-munlock()ing a large region or tearing down a large address space that has been
-mlocked via mlockall(), overall this is a fairly rare event.
+Note that try_to_munlock()'s reverse map walk must visit every VMA in a page's
+reverse map to determine that a page is NOT mapped into any VM_LOCKED VMA.
+However, the scan can terminate when it encounters a VM_LOCKED VMA and can
+successfully acquire the VMA's mmap semphore for read and mlock the page.
+Although try_to_munlock() might be called a great many times when munlocking a
+large region or tearing down a large address space that has been mlocked via
+mlockall(), overall this is a fairly rare event.
-Mlocked Page: Page Reclaim in shrink_*_list()
-shrink_active_list() culls any obviously unevictable pages--i.e.,
-!page_evictable(page, NULL)--diverting these to the unevictable lru
-list. However, shrink_active_list() only sees unevictable pages that
-made it onto the active/inactive lru lists. Note that these pages do not
-have PageUnevictable set--otherwise, they would be on the unevictable list and
-shrink_active_list would never see them.
+PAGE RECLAIM IN shrink_*_list()
+-------------------------------
+
+shrink_active_list() culls any obviously unevictable pages - i.e.
+!page_evictable(page, NULL) - diverting these to the unevictable list.
+However, shrink_active_list() only sees unevictable pages that made it onto the
+active/inactive lru lists. Note that these pages do not have PageUnevictable
+set - otherwise they would be on the unevictable list and shrink_active_list
+would never see them.
Some examples of these unevictable pages on the LRU lists are:
-1) ramfs pages that have been placed on the lru lists when first allocated.
+ (1) ramfs pages that have been placed on the LRU lists when first allocated.
-2) SHM_LOCKed shared memory pages. shmctl(SHM_LOCK) does not attempt to
- allocate or fault in the pages in the shared memory region. This happens
- when an application accesses the page the first time after SHM_LOCKing
- the segment.
+ (2) SHM_LOCK'd shared memory pages. shmctl(SHM_LOCK) does not attempt to
+ allocate or fault in the pages in the shared memory region. This happens
+ when an application accesses the page the first time after SHM_LOCK'ing
+ the segment.
-3) Mlocked pages that could not be isolated from the lru and moved to the
- unevictable list in mlock_vma_page().
+ (3) mlocked pages that could not be isolated from the LRU and moved to the
+ unevictable list in mlock_vma_page().
-3) Pages mapped into multiple VM_LOCKED vmas, but try_to_munlock() couldn't
- acquire the vma's mmap semaphore to test the flags and set PageMlocked.
- munlock_vma_page() was forced to let the page back on to the normal
- LRU list for vmscan to handle.
+ (4) Pages mapped into multiple VM_LOCKED VMAs, but try_to_munlock() couldn't
+ acquire the VMA's mmap semaphore to test the flags and set PageMlocked.
+ munlock_vma_page() was forced to let the page back on to the normal LRU
+ list for vmscan to handle.
-shrink_inactive_list() also culls any unevictable pages that it finds on
-the inactive lists, again diverting them to the appropriate zone's unevictable
-lru list. shrink_inactive_list() should only see SHM_LOCKed pages that became
-SHM_LOCKed after shrink_active_list() had moved them to the inactive list, or
-pages mapped into VM_LOCKED vmas that munlock_vma_page() couldn't isolate from
-the lru to recheck via try_to_munlock(). shrink_inactive_list() won't notice
-the latter, but will pass on to shrink_page_list().
+shrink_inactive_list() also diverts any unevictable pages that it finds on the
+inactive lists to the appropriate zone's unevictable list.
+
+shrink_inactive_list() should only see SHM_LOCK'd pages that became SHM_LOCK'd
+after shrink_active_list() had moved them to the inactive list, or pages mapped
+into VM_LOCKED VMAs that munlock_vma_page() couldn't isolate from the LRU to
+recheck via try_to_munlock(). shrink_inactive_list() won't notice the latter,
+but will pass on to shrink_page_list().
shrink_page_list() again culls obviously unevictable pages that it could
encounter for similar reason to shrink_inactive_list(). Pages mapped into
-VM_LOCKED vmas but without PG_mlocked set will make it all the way to
+VM_LOCKED VMAs but without PG_mlocked set will make it all the way to
try_to_unmap(). shrink_page_list() will divert them to the unevictable list
when try_to_unmap() returns SWAP_MLOCK, as discussed above.
diff --git a/MAINTAINERS b/MAINTAINERS
index 36ea627..d58027e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -461,7 +461,7 @@
AMD MICROCODE UPDATE SUPPORT
P: Andreas Herrmann
-M: andeas.herrmann3@amd.com
+M: andreas.herrmann3@amd.com
L: amd64-microcode@amd64.org
S: Supported
F: arch/x86/kernel/microcode_amd.c
@@ -543,6 +543,14 @@
F: arch/arm/lib/floppydma.S
F: arch/arm/include/asm/floppy.h
+ARM PORT
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.arm.linux.org.uk/
+S: Maintained
+F: arch/arm/
+
ARM PRIMECELL MMCI PL180/1 DRIVER
S: Orphan
F: drivers/mmc/host/mmci.*
@@ -592,6 +600,13 @@
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+ARM/CLKDEV SUPPORT
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+F: arch/arm/common/clkdev.c
+F: arch/arm/include/asm/clkdev.h
+
ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
P: Mike Rapoport
M: mike@compulab.co.il
@@ -610,6 +625,15 @@
T: git git://gitorious.org/linux-gemini/mainline.git
S: Maintained
+ARM/EBSA110 MACHINE SUPPORT
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.arm.linux.org.uk/
+S: Maintained
+F: arch/arm/mach-ebsa110/
+F: drivers/net/arm/am79c961a.*
+
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
P: Daniel Ribeiro
M: drwyrm@gmail.com
@@ -627,6 +651,15 @@
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+ARM/FOOTBRIDGE ARCHITECTURE
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.arm.linux.org.uk/
+S: Maintained
+F: arch/arm/include/asm/hardware/dec21285.h
+F: arch/arm/mach-footbridge/
+
ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
P: Sascha Hauer
M: kernel@pengutronix.de
@@ -767,19 +800,27 @@
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+ARM/RISCPC ARCHITECTURE
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.arm.linux.org.uk/
+S: Maintained
+F: arch/arm/common/time-acorn.c
+F: arch/arm/include/asm/hardware/entry-macro-iomd.S
+F: arch/arm/include/asm/hardware/ioc.h
+F: arch/arm/include/asm/hardware/iomd.h
+F: arch/arm/include/asm/hardware/memc.h
+F: arch/arm/mach-rpc/
+F: drivers/net/arm/ether*
+F: drivers/scsi/arm/
+
ARM/SHARK MACHINE SUPPORT
P: Alexander Schulz
M: alex@shark-linux.de
W: http://www.shark-linux.de/shark.html
S: Maintained
-ARM/STRONGARM110 PORT
-P: Russell King
-M: rmk@arm.linux.org.uk
-L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-W: http://www.arm.linux.org.uk/
-S: Maintained
-
ARM/S3C2410 ARM ARCHITECTURE
P: Ben Dooks
M: ben-linux@fluff.org
@@ -813,6 +854,14 @@
W: http://www.mcuos.com
S: Maintained
+ARM/VFP SUPPORT
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.arm.linux.org.uk/
+S: Maintained
+F: arch/arm/vfp/
+
ARPD SUPPORT
P: Jonathan Layes
L: netdev@vger.kernel.org
@@ -1238,6 +1287,14 @@
F: Documentation/video4linux/bttv/
F: drivers/media/video/bt8xx/bttv*
+CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
+P: David Howells
+M: dhowells@redhat.com
+L: linux-cachefs@redhat.com
+S: Supported
+F: Documentation/filesystems/caching/cachefiles.txt
+F: fs/cachefiles/
+
CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
P: Jonathan Corbet
M: corbet@lwn.net
@@ -1280,12 +1337,9 @@
W: http://www.ibm.com/developerworks/power/cell/
S: Supported
F: arch/powerpc/include/asm/cell*.h
-F: arch/powerpc/include/asm/lv1call.h
-F: arch/powerpc/include/asm/ps3*.h
F: arch/powerpc/include/asm/spu*.h
F: arch/powerpc/oprofile/*cell*
F: arch/powerpc/platforms/cell/
-F: arch/powerpc/platforms/ps3/
CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
P: David Vrabel
@@ -1372,6 +1426,11 @@
F: Documentation/input/cs461x.txt
F: sound/pci/cs46xx/
+CLK API
+P: Russell King
+M: linux@arm.linux.org.uk
+F: include/linux/clk.h
+
CODA FILE SYSTEM
P: Jan Harkes
M: jaharkes@cs.cmu.edu
@@ -1576,7 +1635,8 @@
CYBERPRO FB DRIVER
P: Russell King
-M: rmk@arm.linux.org.uk
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
F: drivers/video/cyber2000fb.*
@@ -1894,7 +1954,7 @@
EDAC-CORE
P: Doug Thompson
M: dougthompson@xmission.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Supported
F: Documentation/edac.txt
@@ -1906,7 +1966,7 @@
P: Doug Thompson
M: mark.gross@intel.com
M: dougthompson@xmission.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/e752x_edac.c
@@ -1914,7 +1974,7 @@
EDAC-E7XXX
P: Doug Thompson
M: dougthompson@xmission.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/e7xxx_edac.c
@@ -1922,7 +1982,7 @@
EDAC-I82443BXGX
P: Tim Small
M: tim@buttersideup.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i82443bxgx_edac.c
@@ -1930,7 +1990,7 @@
EDAC-I3000
P: Jason Uhlenkott
M: juhlenko@akamai.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i3000_edac.c
@@ -1938,7 +1998,7 @@
EDAC-I5000
P: Doug Thompson
M: dougthompson@xmission.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i5000_edac.c
@@ -1946,7 +2006,7 @@
EDAC-I5400
P: Mauro Carvalho Chehab
M: mchehab@redhat.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i5400_edac.c
@@ -1956,7 +2016,7 @@
P: Arvind R.
M: rdesikan@jetzbroadband.com
M: arvind@acarlab.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i82975x_edac.c
@@ -1964,7 +2024,7 @@
EDAC-PASEMI
P: Egor Martovetsky
M: egor@pasemi.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/pasemi_edac.c
@@ -1972,7 +2032,7 @@
EDAC-R82600
P: Tim Small
M: tim@buttersideup.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/r82600_edac.c
@@ -2002,6 +2062,8 @@
EMBEDDED LINUX
P: Paul Gortmaker
M: paul.gortmaker@windriver.com
+P: Matt Mackall
+M: mpm@selenic.com
P: David Woodhouse
M: dwmw2@infradead.org
L: linux-embedded@vger.kernel.org
@@ -2270,6 +2332,15 @@
F: include/linux/freezer.h
F: kernel/freezer.c
+FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
+P: David Howells
+M: dhowells@redhat.com
+L: linux-cachefs@redhat.com
+S: Supported
+F: Documentation/filesystems/caching/
+F: fs/fscache/
+F: include/linux/fscache*.h
+
FTRACE
P: Steven Rostedt
M: rostedt@goodmis.org
@@ -2490,7 +2561,6 @@
F: include/linux/suspend.h
F: include/linux/freezer.h
F: include/linux/pm.h
-F: include/asm-*/suspend*.h
F: arch/*/include/asm/suspend*.h
HID CORE LAYER
@@ -2592,8 +2662,8 @@
F: fs/hpfs/
HSO 3G MODEM DRIVER
-P: Denis Joseph Barrow
-M: d.barow@option.com
+P: Jan Dumon
+M: j.dumon@option.com
W: http://www.pharscape.org
S: Maintained
F: drivers/net/usb/hso.c
@@ -3268,7 +3338,7 @@
M: eduard.munteanu@linux360.ro
L: linux-kernel@vger.kernel.org
S: Maintained
-F: Documentation/vm/kmemtrace.txt
+F: Documentation/trace/kmemtrace.txt
F: include/trace/kmemtrace.h
F: kernel/trace/kmemtrace.c
@@ -3680,6 +3750,7 @@
W: http://www.monstr.eu/fdt/
T: git git://git.monstr.eu/linux-2.6-microblaze.git
S: Supported
+F: arch/microblaze/
MICROTEK X6 SCANNER
P: Oliver Neukum
@@ -4440,7 +4511,9 @@
F: arch/powerpc/platforms/ps3/
F: drivers/*/ps3*
F: drivers/ps3/
+F: drivers/rtc/rtc-ps3.c
F: drivers/usb/host/*ps3.c
+F: sound/ppc/snd_ps3*
PS3VRAM DRIVER
P: Jim Paris
@@ -4978,8 +5051,8 @@
F: Documentation/sgi-visws.txt
SGI XP/XPC/XPNET DRIVER
-P: Dean Nelson
-M: dcn@sgi.com
+P: Robin Holt
+M: holt@sgi.com
S: Maintained
F: drivers/misc/sgi-xp/
@@ -5186,7 +5259,12 @@
P: Takashi Iwai
M: tiwai@suse.de
L: alsa-devel@alsa-project.org (subscribers-only)
+W: http://www.alsa-project.org/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+T: git git://git.alsa-project.org/alsa-kernel.git
S: Maintained
+F: Documentation/sound/
+F: include/sound/
F: sound/
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
@@ -5313,7 +5391,9 @@
W: http://www.linux-sh.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
S: Supported
+F: Documentation/sh/
F: arch/sh/
+F: drivers/sh/
SUSPEND TO RAM
P: Len Brown
@@ -5331,7 +5411,6 @@
F: include/linux/suspend.h
F: include/linux/freezer.h
F: include/linux/pm.h
-F: include/asm-*/suspend.h
SVGA HANDLING
P: Martin Mares
@@ -5565,7 +5644,7 @@
S: Maintained
F: arch/m68knommu/
-UCLINUX FOR RENESAS H8/300
+UCLINUX FOR RENESAS H8/300 (H8300)
P: Yoshinori Sato
M: ysato@users.sourceforge.jp
W: http://uclinux-h8.sourceforge.jp/
diff --git a/Makefile b/Makefile
index ad830bd..9e5dc8f 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 30
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
NAME = Temporary Tasmanian Devil
# *DOCUMENTATION*
@@ -169,7 +169,7 @@
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ \
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
- -e s/sh.*/sh/ )
+ -e s/sh[234].*/sh/ )
# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------
@@ -210,6 +210,11 @@
SRCARCH := sparc
endif
+# Additional ARCH settings for sh
+ifeq ($(ARCH),sh64)
+ SRCARCH := sh
+endif
+
# Where to locate arch specific headers
hdr-arch := $(SRCARCH)
@@ -1195,7 +1200,7 @@
.tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
# Directories & files removed with 'make mrproper'
-MRPROPER_DIRS += include/config include2 usr/include
+MRPROPER_DIRS += include/config include2 usr/include include/generated
MRPROPER_FILES += .config .config.old include/asm .version .old_version \
include/linux/autoconf.h include/linux/version.h \
include/linux/utsrelease.h \
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 3495e8e..e9e0bb5 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -73,6 +73,6 @@
#endif /* SMP */
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name)
+#include <asm-generic/percpu.h>
#endif /* __ALPHA_PERCPU_H */
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index ecf0bfb..b2a781d 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -85,12 +85,11 @@
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
for (i = 0; i < 32; i++) {
- unsigned int irq = irq_start + i;
-
- set_irq_chip(irq, &vic_chip);
- set_irq_chip_data(irq, base);
-
if (vic_sources & (1 << i)) {
+ unsigned int irq = irq_start + i;
+
+ set_irq_chip(irq, &vic_chip);
+ set_irq_chip_data(irq, base);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
diff --git a/arch/arm/configs/imx27ads_defconfig b/arch/arm/configs/imx27ads_defconfig
deleted file mode 100644
index bcd95b8..0000000
--- a/arch/arm/configs/imx27ads_defconfig
+++ /dev/null
@@ -1,826 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:29:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-
-#
-# MX2 family CPU support
-#
-CONFIG_MACH_MX27=y
-
-#
-# MX2 Platforms
-#
-CONFIG_MACH_MX27ADS=y
-# CONFIG_MACH_PCM038 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_FEC_OLD is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_IMX is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx31ads_defconfig b/arch/arm/configs/mx1_defconfig
similarity index 60%
rename from arch/arm/configs/mx31ads_defconfig
rename to arch/arm/configs/mx1_defconfig
index e052717..0200d67 100644
--- a/arch/arm/configs/mx31ads_defconfig
+++ b/arch/arm/configs/mx1_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:21:11 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr 8 11:11:33 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,9 +22,8 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -43,15 +43,24 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -59,26 +68,26 @@
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
@@ -88,11 +97,10 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,12 +108,10 @@
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -119,7 +125,7 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type
@@ -129,11 +135,10 @@
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@@ -145,55 +150,55 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_MX1ADS=y
#
# Freescale MXC Implementations
#
+CONFIG_ARCH_MX1=y
# CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
+# CONFIG_ARCH_MX3 is not set
#
-# MX3 Options
+# MX1 platforms:
#
-CONFIG_MACH_MX31ADS=y
-# CONFIG_MACH_PCM037 is not set
+CONFIG_MACH_MXLADS=y
+CONFIG_MACH_SCB9328=y
+CONFIG_MXC_IRQ_PRIOR=y
+# CONFIG_MXC_PWM is not set
#
# Processor Type
#
CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
@@ -203,7 +208,7 @@
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_OUTER_CACHE is not set
#
@@ -220,25 +225,32 @@
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -251,30 +263,41 @@
# CONFIG_KEXEC is not set
#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
# Floating point emulation
#
#
# At least one emulation must be selected
#
-CONFIG_VFP=y
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -283,11 +306,6 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -306,12 +324,11 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -324,6 +341,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -333,7 +351,9 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -344,14 +364,8 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -366,16 +380,16 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
@@ -399,36 +413,31 @@
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
+# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
@@ -446,17 +455,15 @@
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -476,23 +483,51 @@
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -502,7 +537,10 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -542,46 +580,124 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
-# GPIO Support
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
#
# SPI GPIO expanders:
#
-# CONFIG_W1 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -604,36 +720,131 @@
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
-# Sound
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_IMX=y
+CONFIG_USB_IMX=y
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -643,6 +854,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -660,15 +876,13 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -687,25 +901,30 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
@@ -724,9 +943,9 @@
#
# Kernel hacking
#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
@@ -734,8 +953,31 @@
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
#
@@ -743,15 +985,28 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -766,7 +1021,7 @@
#
# Block modes
#
-# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
@@ -785,8 +1040,12 @@
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -803,7 +1062,7 @@
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
@@ -816,24 +1075,31 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_HW is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/mx27_defconfig
similarity index 77%
rename from arch/arm/configs/pcm038_defconfig
rename to arch/arm/configs/mx27_defconfig
index 41429a0..083516c 100644
--- a/arch/arm/configs/pcm038_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:38:36 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr 8 10:18:06 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,9 +22,8 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,47 +40,58 @@
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
@@ -88,11 +99,10 @@
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,12 +110,10 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -119,7 +127,7 @@
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type
@@ -129,11 +137,10 @@
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@@ -145,46 +152,44 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Freescale MXC Implementations
#
+# CONFIG_ARCH_MX1 is not set
CONFIG_ARCH_MX2=y
# CONFIG_ARCH_MX3 is not set
-
-#
-# MX2 family CPU support
-#
+# CONFIG_MACH_MX21 is not set
CONFIG_MACH_MX27=y
#
-# MX2 Platforms
+# MX2 platforms:
#
-# CONFIG_MACH_MX27ADS is not set
+CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_PCM970_BASEBOARD=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
#
# Processor Type
@@ -209,6 +214,7 @@
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
@@ -224,25 +230,32 @@
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -255,30 +268,44 @@
# CONFIG_KEXEC is not set
#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
# Floating point emulation
#
#
# At least one emulation must be selected
#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
# CONFIG_VFP is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -293,7 +320,7 @@
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
@@ -323,6 +350,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -332,26 +360,23 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -366,12 +391,15 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -426,9 +454,7 @@
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
@@ -452,6 +478,11 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -477,7 +508,7 @@
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -491,12 +522,20 @@
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
-CONFIG_FEC_OLD=y
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -505,7 +544,10 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -541,12 +583,15 @@
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -559,6 +604,7 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -573,42 +619,55 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -622,47 +681,83 @@
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
#
-# GPIO Support
+# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
+# PCI GPIO expanders:
+#
+
+#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -683,7 +778,7 @@
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
@@ -692,16 +787,17 @@
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
@@ -714,9 +810,10 @@
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
@@ -732,8 +829,12 @@
#
# Frame buffer hardware drivers
#
+CONFIG_FB_IMX=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -761,14 +862,29 @@
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -800,42 +916,56 @@
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
@@ -844,6 +974,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -861,15 +996,13 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -889,25 +1022,27 @@
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -972,12 +1107,41 @@
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
#
@@ -985,24 +1149,26 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx31litekit_defconfig b/arch/arm/configs/mx3_defconfig
similarity index 61%
rename from arch/arm/configs/mx31litekit_defconfig
rename to arch/arm/configs/mx3_defconfig
index 4f41c41..72a8201 100644
--- a/arch/arm/configs/mx31litekit_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -1,17 +1,18 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 14:23:39 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr 8 11:06:37 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,9 +22,8 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -43,11 +43,24 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -55,27 +68,26 @@
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
@@ -85,11 +97,10 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -97,12 +108,10 @@
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -116,7 +125,7 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type
@@ -126,11 +135,10 @@
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@@ -142,46 +150,54 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Freescale MXC Implementations
#
+# CONFIG_ARCH_MX1 is not set
+# CONFIG_ARCH_MX2 is not set
CONFIG_ARCH_MX3=y
+CONFIG_ARCH_MX31=y
#
-# MX3 Options
+# MX3 platforms:
#
-# CONFIG_MACH_MX31ADS is not set
+CONFIG_MACH_MX31ADS=y
+CONFIG_MACH_MX31ADS_WM1133_EV1=y
+CONFIG_MACH_PCM037=y
CONFIG_MACH_MX31LITE=y
+CONFIG_MACH_MX31_3DS=y
+CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_QONG=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6K=y
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_NOIFAR=y
@@ -200,45 +216,50 @@
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA is not set
-
-#
-# PC-card bridges
-#
+# CONFIG_PCCARD is not set
#
# Kernel Features
#
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -251,33 +272,42 @@
# CONFIG_KEXEC is not set
#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
# Floating point emulation
#
#
# At least one emulation must be selected
#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_SUSPEND is not set
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -286,11 +316,6 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -309,12 +334,11 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -327,6 +351,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -336,7 +361,9 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -347,14 +374,8 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -369,18 +390,16 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
@@ -404,36 +423,31 @@
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
+# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
@@ -451,18 +465,15 @@
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -476,63 +487,58 @@
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_NONISA_IRQ=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -541,16 +547,10 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
-# USB Network Adapters
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -562,43 +562,7 @@
#
# Input device support
#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
#
# Hardware I/O ports
@@ -609,10 +573,7 @@
#
# Character devices
#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_VT is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
@@ -624,45 +585,132 @@
#
# Non-8250 serial port support
#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
-# CONFIG_W1 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM8350=y
+CONFIG_MFD_WM8350_CONFIG_MODE_0=y
+CONFIG_MFD_WM8352_CONFIG_MODE_0=y
+CONFIG_MFD_WM8350_I2C=y
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -673,7 +721,7 @@
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=y
@@ -682,34 +730,38 @@
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_MT9M001=y
+CONFIG_SOC_CAMERA_MT9M111=y
+CONFIG_SOC_CAMERA_MT9T031=y
+CONFIG_SOC_CAMERA_MT9V022=y
+CONFIG_SOC_CAMERA_TW9910=y
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_MX3=y
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
#
# Graphics support
@@ -719,9 +771,10 @@
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
@@ -739,131 +792,79 @@
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_FB_MX3=y
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# Miscellaneous USB options
+# MMC/SD/SDIO Card Drivers
#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
-# USB Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MX3_IPU=y
+CONFIG_MX3_IPU_IRQS=4
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_WM8350=y
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -873,6 +874,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -890,15 +896,13 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -917,25 +921,30 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
@@ -954,65 +963,70 @@
#
# Kernel hacking
#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1027,7 +1041,7 @@
#
# Block modes
#
-# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
@@ -1046,8 +1060,12 @@
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -1064,7 +1082,7 @@
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
@@ -1077,24 +1095,31 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig
deleted file mode 100644
index 6e37c77..0000000
--- a/arch/arm/configs/pcm037_defconfig
+++ /dev/null
@@ -1,769 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Wed Jun 25 11:52:42 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
-# CONFIG_MACH_MX31ADS is not set
-CONFIG_MACH_PCM037=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 65a583e..2d58b8f 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,9 +1,9 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Mon Jul 7 16:59:23 2008
+# Linux kernel version: 2.6.30-rc2
#
CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
# CONFIG_GENERIC_TIME is not set
@@ -12,6 +12,7 @@
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,8 +22,7 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -41,11 +41,20 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -54,31 +63,36 @@
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
@@ -88,11 +102,11 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,12 +114,10 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -119,7 +131,7 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type
@@ -129,11 +141,10 @@
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@@ -145,26 +156,38 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
CONFIG_ARCH_S3C2410=y
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
CONFIG_PLAT_S3C24XX=y
+CONFIG_S3C2410_CLOCK=y
+CONFIG_S3C24XX_DCLK=y
CONFIG_CPU_S3C244X=y
-# CONFIG_S3C24XX_PWM is not set
+CONFIG_S3C24XX_PWM=y
+CONFIG_S3C24XX_GPIO_EXTRA=128
+CONFIG_S3C24XX_GPIO_EXTRA64=y
+CONFIG_S3C24XX_GPIO_EXTRA128=y
CONFIG_PM_SIMTEC=y
CONFIG_S3C2410_DMA=y
# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_S3C24XX_ADC=y
CONFIG_MACH_SMDK=y
CONFIG_PLAT_S3C=y
CONFIG_CPU_LLSERIAL_S3C2410=y
@@ -174,7 +197,8 @@
# Boot options
#
# CONFIG_S3C_BOOT_WATCHDOG is not set
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_ERROR_RESET=y
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
#
# Power management
@@ -182,6 +206,8 @@
# CONFIG_S3C2410_PM_DEBUG is not set
# CONFIG_S3C2410_PM_CHECK is not set
CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_DEV_HSMMC=y
#
# S3C2400 Machines
@@ -190,7 +216,6 @@
CONFIG_CPU_S3C2410_DMA=y
CONFIG_S3C2410_PM=y
CONFIG_S3C2410_GPIO=y
-CONFIG_S3C2410_CLOCK=y
CONFIG_SIMTEC_NOR=y
CONFIG_MACH_BAST_IDE=y
@@ -205,7 +230,7 @@
CONFIG_MACH_OTOM=y
CONFIG_MACH_AML_M5900=y
CONFIG_BAST_PC104_IRQ=y
-# CONFIG_MACH_TCT_HAMMER is not set
+CONFIG_MACH_TCT_HAMMER=y
CONFIG_MACH_VR1000=y
CONFIG_MACH_QT2410=y
CONFIG_CPU_S3C2412=y
@@ -215,10 +240,11 @@
#
# S3C2412 Machines
#
-# CONFIG_MACH_JIVE is not set
+CONFIG_MACH_JIVE=y
+# CONFIG_MACH_JIVE_SHOW_BOOTLOADER is not set
CONFIG_MACH_SMDK2413=y
CONFIG_MACH_S3C2413=y
-# CONFIG_MACH_SMDK2412 is not set
+CONFIG_MACH_SMDK2412=y
CONFIG_MACH_VSTMS=y
CONFIG_CPU_S3C2440=y
CONFIG_S3C2440_DMA=y
@@ -232,7 +258,7 @@
CONFIG_ARCH_S3C2440=y
CONFIG_MACH_NEXCODER_2440=y
CONFIG_SMDK2440_CPU2440=y
-# CONFIG_MACH_AT2440EVB is not set
+CONFIG_MACH_AT2440EVB=y
CONFIG_CPU_S3C2442=y
#
@@ -286,25 +312,31 @@
#
# Kernel Features
#
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
CONFIG_HZ=200
# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -317,6 +349,11 @@
# CONFIG_KEXEC is not set
#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
# Floating point emulation
#
@@ -332,6 +369,8 @@
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
@@ -346,10 +385,6 @@
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=m
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -359,11 +394,13 @@
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
@@ -372,15 +409,16 @@
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
@@ -388,8 +426,25 @@
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
@@ -413,12 +468,181 @@
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+# CONFIG_IP_VS_PROTO_TCP is not set
+# CONFIG_IP_VS_PROTO_UDP is not set
+# CONFIG_IP_VS_PROTO_ESP is not set
+# CONFIG_IP_VS_PROTO_AH is not set
+
+#
+# IPVS scheduler
+#
+# CONFIG_IP_VS_RR is not set
+# CONFIG_IP_VS_WRR is not set
+# CONFIG_IP_VS_LC is not set
+# CONFIG_IP_VS_WLC is not set
+# CONFIG_IP_VS_LBLC is not set
+# CONFIG_IP_VS_LBLCR is not set
+# CONFIG_IP_VS_DH is not set
+# CONFIG_IP_VS_SH is not set
+# CONFIG_IP_VS_SED is not set
+# CONFIG_IP_VS_NQ is not set
+
+#
+# IPVS application helper
+#
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -428,8 +652,10 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
@@ -451,8 +677,8 @@
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
@@ -462,35 +688,26 @@
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
CONFIG_CFG80211=m
-CONFIG_NL80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
-CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -504,7 +721,9 @@
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -513,6 +732,7 @@
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
@@ -545,7 +765,7 @@
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
@@ -566,8 +786,6 @@
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
-CONFIG_MTD_BAST=y
-CONFIG_MTD_BAST_MAXSIZE=4
# CONFIG_MTD_PLATRAM is not set
#
@@ -590,6 +808,7 @@
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_S3C2410=y
# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
@@ -602,6 +821,11 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -620,7 +844,7 @@
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
@@ -628,32 +852,40 @@
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_AT25=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_PLATFORM=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
@@ -699,6 +931,8 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -711,11 +945,13 @@
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_HAVE_PATA_PLATFORM=y
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -731,9 +967,14 @@
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
-# CONFIG_ENC28J60 is not set
CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
@@ -742,11 +983,14 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
CONFIG_NETDEV_10000=y
# CONFIG_TR is not set
@@ -755,7 +999,10 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
@@ -778,7 +1025,7 @@
# Input device support
#
CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
#
@@ -789,7 +1036,7 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
@@ -808,20 +1055,88 @@
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+# CONFIG_JOYSTICK_IFORCE_USB is not set
+# CONFIG_JOYSTICK_IFORCE_232 is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
#
# Hardware I/O ports
@@ -831,12 +1146,15 @@
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
+CONFIG_GAMEPORT=m
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -877,14 +1195,17 @@
# Non-8250 serial port support
#
CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_S3C2410=y
CONFIG_SERIAL_S3C2412=y
CONFIG_SERIAL_S3C2440=y
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
@@ -892,7 +1213,7 @@
CONFIG_PPDEV=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
@@ -901,33 +1222,44 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
-# CONFIG_I2C_ELEKTOR is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SIMTEC=y
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -943,6 +1275,7 @@
#
CONFIG_SPI_BITBANG=m
# CONFIG_SPI_BUTTERFLY is not set
+CONFIG_SPI_GPIO=m
# CONFIG_SPI_LM70_LLP is not set
CONFIG_SPI_S3C24XX=m
CONFIG_SPI_S3C24XX_GPIO=m
@@ -950,44 +1283,56 @@
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_SPI_TLE62X0=m
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
-# GPIO Support
+# Memory mapped GPIO expanders:
#
-# CONFIG_DEBUG_GPIO is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
+# PCI GPIO expanders:
+#
+
+#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -1003,10 +1348,16 @@
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
@@ -1022,7 +1373,10 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1043,20 +1397,33 @@
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
+# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -1065,14 +1432,189 @@
#
# Multimedia core support
#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
-# CONFIG_DAB is not set
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_VIVI=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_PP=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_VIDEO_AU0828=m
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+CONFIG_RADIO_RTRACK2=m
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_TYPHOON_PROC_FS=y
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_USB_DSBR=m
+CONFIG_USB_SI470X=m
+CONFIG_USB_MR800=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_DVB_DYNAMIC_MINORS=y
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+# CONFIG_DVB_USB_A800 is not set
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+# CONFIG_DVB_USB_GL861 is not set
+# CONFIG_DVB_USB_AU6610 is not set
+# CONFIG_DVB_USB_DIGITV is not set
+# CONFIG_DVB_USB_VP7045 is not set
+# CONFIG_DVB_USB_VP702X is not set
+# CONFIG_DVB_USB_GP8PSK is not set
+# CONFIG_DVB_USB_NOVA_T_USB2 is not set
+# CONFIG_DVB_USB_TTUSB2 is not set
+# CONFIG_DVB_USB_DTT200U is not set
+# CONFIG_DVB_USB_OPERA1 is not set
+CONFIG_DVB_USB_AF9005=m
+# CONFIG_DVB_USB_AF9005_REMOTE is not set
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_CINERGY_T2 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+# CONFIG_DVB_USB_DTV5100 is not set
+# CONFIG_DVB_USB_AF9015 is not set
+# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DAB=y
+CONFIG_USB_DABUSB=m
#
# Graphics support
@@ -1082,6 +1624,7 @@
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1105,7 +1648,19 @@
# CONFIG_FB_S3C2410_DEBUG is not set
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PWM=m
#
# Display device support
@@ -1125,11 +1680,54 @@
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_CAIAQ=m
+# CONFIG_SND_USB_CAIAQ_INPUT is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_S3C24XX_SOC=y
+CONFIG_SND_S3C24XX_SOC_I2S=m
+CONFIG_SND_S3C_I2SV2_SOC=m
+CONFIG_SND_S3C2412_SOC_I2S=m
+CONFIG_SND_S3C2443_SOC_AC97=m
+CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
+CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
+CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
+CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=m
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AC97_CODEC=m
+CONFIG_SND_SOC_L3=m
+CONFIG_SND_SOC_UDA134X=m
+CONFIG_SND_SOC_WM8750=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
@@ -1139,12 +1737,12 @@
# USB Input Devices
#
# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
#
-# USB HID Boot Protocol drivers
+# Special HID drivers
#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
+CONFIG_HID_APPLE=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1161,19 +1759,26 @@
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
@@ -1181,53 +1786,51 @@
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
-# CONFIG_USB_USS720 is not set
+CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
@@ -1251,42 +1854,71 @@
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_LD=m
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+CONFIG_MMC_TEST=m
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SPI=m
+CONFIG_MMC_S3C=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
@@ -1295,7 +1927,14 @@
#
CONFIG_LEDS_S3C24XX=m
CONFIG_LEDS_H1940=m
-# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_PCA9532=m
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_DAC124S085=m
+CONFIG_LEDS_PWM=m
+CONFIG_LEDS_BD2802=m
#
# LED Triggers
@@ -1304,7 +1943,13 @@
CONFIG_LEDS_TRIGGER_TIMER=m
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1335,31 +1980,43 @@
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_S3C=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1370,27 +2027,40 @@
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+CONFIG_JBD2=m
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
@@ -1416,15 +2086,13 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1444,27 +2112,49 @@
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@@ -1546,6 +2236,11 @@
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1565,14 +2260,39 @@
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1586,19 +2306,29 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
@@ -1630,10 +2360,14 @@
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -1663,23 +2397,37 @@
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 857f1df..321c83e 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -36,6 +36,8 @@
struct mmu_gather {
struct mm_struct *mm;
unsigned int fullmm;
+ unsigned long range_start;
+ unsigned long range_end;
};
DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -63,7 +65,19 @@
put_cpu_var(mmu_gathers);
}
-#define tlb_remove_tlb_entry(tlb,ptep,address) do { } while (0)
+/*
+ * Memorize the range for the TLB flush.
+ */
+static inline void
+tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr)
+{
+ if (!tlb->fullmm) {
+ if (addr < tlb->range_start)
+ tlb->range_start = addr;
+ if (addr + PAGE_SIZE > tlb->range_end)
+ tlb->range_end = addr + PAGE_SIZE;
+ }
+}
/*
* In the case of tlb vma handling, we can optimise these away in the
@@ -73,15 +87,18 @@
static inline void
tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
{
- if (!tlb->fullmm)
+ if (!tlb->fullmm) {
flush_cache_range(vma, vma->vm_start, vma->vm_end);
+ tlb->range_start = TASK_SIZE;
+ tlb->range_end = 0;
+ }
}
static inline void
tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
{
- if (!tlb->fullmm)
- flush_tlb_range(vma, vma->vm_start, vma->vm_end);
+ if (!tlb->fullmm && tlb->range_end > 0)
+ flush_tlb_range(vma, tlb->range_start, tlb->range_end);
}
#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page)
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 42623db..d59a0cd 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -83,6 +83,7 @@
#include <linux/net.h>
#include <linux/ipc.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
struct oldabi_stat64 {
unsigned long long st_dev;
@@ -176,21 +177,12 @@
int flag)
{
struct kstat stat;
- int error = -EINVAL;
+ int error;
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_oldabi_stat64(&stat, statbuf);
-
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_oldabi_stat64(&stat, statbuf);
}
struct oabi_flock64 {
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 1ff1bda..309f351 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -85,7 +85,7 @@
.handler = at91rm9200_timer_interrupt
};
-static cycle_t read_clk32k(void)
+static cycle_t read_clk32k(struct clocksource *cs)
{
return read_CRTR();
}
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index b63e1d5..4bd56ae 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -31,7 +31,7 @@
* Clocksource: just a monotonic counter of MCK/16 cycles.
* We don't care whether or not PIT irqs are enabled.
*/
-static cycle_t read_pit_clk(void)
+static cycle_t read_pit_clk(struct clocksource *cs)
{
unsigned long flags;
u32 elapsed;
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index f8bcd29..6c227d4 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -238,7 +238,7 @@
/*
* clocksource
*/
-static cycle_t read_cycles(void)
+static cycle_t read_cycles(struct clocksource *cs)
{
struct timer_s *t = &timers[TID_CLOCKSOURCE];
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 6d9152d..ae24486 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -100,7 +100,7 @@
#define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
-static int ep93xx_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
{
__raw_writel(1, EP93XX_TIMER1_CLEAR);
while ((signed long)
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index aff0ebc..5aef18b 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -73,7 +73,7 @@
IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
}
-cycle_t imx_get_cycles(void)
+cycle_t imx_get_cycles(struct clocksource *cs)
{
return IMX_TCN(TIMER_BASE);
}
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index f4656d2..1e93dfe 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -401,7 +401,7 @@
/*
* clocksource
*/
-cycle_t ixp4xx_get_cycles(void)
+cycle_t ixp4xx_get_cycles(struct clocksource *cs)
{
return *IXP4XX_OSTS;
}
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 444d9c0..4855b8c 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -57,12 +57,12 @@
return IRQ_HANDLED;
}
-static cycle_t msm_gpt_read(void)
+static cycle_t msm_gpt_read(struct clocksource *cs)
{
return readl(MSM_GPT_BASE + TIMER_COUNT_VAL);
}
-static cycle_t msm_dgt_read(void)
+static cycle_t msm_dgt_read(struct clocksource *cs)
{
return readl(MSM_DGT_BASE + TIMER_COUNT_VAL) >> MSM_DGT_SHIFT;
}
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index 7ae229b..e54057f 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -28,9 +28,7 @@
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/irqs.h>
-#ifdef CONFIG_I2C_IMX
#include <mach/i2c.h>
-#endif
#include <mach/iomux.h>
#include "devices.h"
@@ -114,7 +112,6 @@
* I2C
*/
-#ifdef CONFIG_I2C_IMX
static int i2c_pins[] = {
PA15_PF_I2C_SDA,
PA16_PF_I2C_SCL,
@@ -157,7 +154,6 @@
.platform_data = &pcf857x_data[1],
},
};
-#endif
/*
* Board init
@@ -172,12 +168,10 @@
mxc_register_device(&flash_device, &mx1ads_flash_data);
/* I2C */
-#ifdef CONFIG_I2C_IMX
i2c_register_board_info(0, mx1ads_i2c_devices,
ARRAY_SIZE(mx1ads_i2c_devices));
mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
-#endif
}
static void __init mx1ads_timer_init(void)
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 2dee5c8..999d013 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -919,19 +919,19 @@
_REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0])
_REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1])
_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
- _REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0])
+ _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
_REGISTER_CLOCK(NULL, "usb", usb_clk[0])
_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
- _REGISTER_CLOCK(NULL, "nfc", nfc_clk)
+ _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
_REGISTER_CLOCK(NULL, "dma", dma_clk[0])
_REGISTER_CLOCK(NULL, "brom", brom_clk)
_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
- _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
- _REGISTER_CLOCK(NULL, "i2c", i2c_clk)
+ _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
_REGISTER_CLOCK(NULL, "owire", owire_clk)
_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index d623558..194b842 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -19,6 +19,8 @@
config MACH_MX31ADS_WM1133_EV1
bool "Support Wolfson Microelectronics 1133-EV1 module"
depends on MACH_MX31ADS
+ depends on MFD_WM8350_I2C
+ depends on REGULATOR_WM8350
select MFD_WM8350_CONFIG_MODE_0
select MFD_WM8352_CONFIG_MODE_0
help
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 83e5e8e..a6d6efe 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -102,7 +102,7 @@
.flags = IMXUART_HAVE_RTSCTS,
};
-static int uart_pins[] = {
+static unsigned int uart_pins[] = {
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
@@ -452,6 +452,8 @@
wm8350->codec.platform_data = &imx32ads_wm8350_setup;
+ regulator_has_full_constraints();
+
return 0;
}
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index c3648ef..b5227d8 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -226,10 +226,10 @@
mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
mxc_register_device(&mxc_w1_master_device, NULL);
- /* SMSC9215 IRQ pin */
+ /* LAN9217 IRQ pin */
if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
"pcm037-eth"))
- gpio_direction_input(MX31_PIN_GPIO3_1);
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
#ifdef CONFIG_I2C_IMX
i2c_register_board_info(1, pcm037_i2c_devices,
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 6c4283c..5a01e48 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -251,32 +251,6 @@
}
/*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc qong_io_desc[] __initdata = {
- {
- .virtual = AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
- .length = AIPS1_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
- .virtual = AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
- .length = AIPS2_SIZE,
- .type = MT_DEVICE_NONSHARED
- }
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init qong_map_io(void)
-{
- mxc_map_io();
- iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc));
-}
-
-/*
* Board specific initialization.
*/
static void __init mxc_board_init(void)
@@ -305,7 +279,7 @@
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = qong_map_io,
+ .map_io = mxc_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &qong_timer,
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index f201fdd..82801dbf 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -104,7 +104,7 @@
.handler = netx_timer_interrupt,
};
-cycle_t netx_get_cycles(void)
+cycle_t netx_get_cycles(struct clocksource *cs)
{
return readl(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
}
diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c
index 41df697..7728126 100644
--- a/arch/arm/mach-ns9xxx/time-ns9360.c
+++ b/arch/arm/mach-ns9xxx/time-ns9360.c
@@ -25,7 +25,7 @@
#define TIMER_CLOCKEVENT 1
static u32 latch;
-static cycle_t ns9360_clocksource_read(void)
+static cycle_t ns9360_clocksource_read(struct clocksource *cs)
{
return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE));
}
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 495a32c..4d56408 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -198,7 +198,7 @@
.handler = omap_mpu_timer2_interrupt,
};
-static cycle_t mpu_read(void)
+static cycle_t mpu_read(struct clocksource *cs)
{
return ~omap_mpu_timer_read(1);
}
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 9fc13a2..1cb2c09 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -138,7 +138,7 @@
* clocksource
*/
static struct omap_dm_timer *gpt_clocksource;
-static cycle_t clocksource_read_cycles(void)
+static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource);
}
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index fc74e91..34a56a1 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -131,14 +131,14 @@
.power = 50, /* up to 100 mA */
};
-static u64 musb_dmamask = DMA_32BIT_MASK;
+static u64 musb_dmamask = DMA_BIT_MASK(32);
static struct platform_device musb_device = {
.name = "musb_hdrc",
.id = -1,
.dev = {
.dma_mask = &musb_dmamask,
- .coherent_dma_mask = DMA_32BIT_MASK,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &musb_plat,
},
.num_resources = ARRAY_SIZE(musb_resources),
@@ -146,14 +146,14 @@
};
#ifdef CONFIG_NOP_USB_XCEIV
-static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
static struct platform_device nop_xceiv_device = {
.name = "nop_usb_xceiv",
.id = -1,
.dev = {
.dma_mask = &nop_xceiv_dmamask,
- .coherent_dma_mask = DMA_32BIT_MASK,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = NULL,
},
};
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 67611da..bc0f73f 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -28,7 +28,6 @@
#include <linux/spi/libertas_spi.h>
#include <linux/power_supply.h>
#include <linux/apm-emulation.h>
-#include <linux/delay.h>
#include <media/soc_camera.h>
@@ -644,8 +643,9 @@
};
static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
- .rx_threshold = 1,
- .tx_threshold = 1,
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+ .gpio_cs = -1,
};
static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 3465268..485fede 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -15,6 +15,9 @@
extern void __init pxa_init_irq(int irq_nr,
int (*set_wake)(unsigned int, unsigned int));
extern void __init pxa25x_init_irq(void);
+#ifdef CONFIG_CPU_PXA26x
+extern void __init pxa26x_init_irq(void);
+#endif
extern void __init pxa27x_init_irq(void);
extern void __init pxa3xx_init_irq(void);
extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 90230c6..a88d7ca 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -10,13 +10,13 @@
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
#else
-static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {}
+static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {}
#endif
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
extern void colibri_pxa3xx_init_lcd(int bl_pin);
#else
-static inline void colibri_pxa3xx_init_lcd(int) {}
+static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
#endif
#if defined(CONFIG_AX88796)
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index 052bfe7..d15662a 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -37,7 +37,6 @@
/* USB */
#define GPIO_NR_PALMT5_USB_DETECT_N 15
-#define GPIO_NR_PALMT5_USB_POWER 95
#define GPIO_NR_PALMT5_USB_PULLUP 93
/* LCD/BACKLIGHT */
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 9f7d62f..e74082c 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -38,7 +38,6 @@
/* USB */
#define GPIO_NR_PALMTX_USB_DETECT_N 13
-#define GPIO_NR_PALMTX_USB_POWER 95
#define GPIO_NR_PALMTX_USB_PULLUP 93
/* LCD/BACKLIGHT */
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 0680f1a..d7f8106 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -64,6 +64,7 @@
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO95_AC97_nRESET,
/* IrDA */
GPIO40_GPIO, /* ir disable */
@@ -72,7 +73,7 @@
/* USB */
GPIO15_GPIO, /* usb detect */
- GPIO95_GPIO, /* usb power */
+ GPIO93_GPIO, /* usb power */
/* MATRIX KEYPAD */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
@@ -344,7 +345,7 @@
static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
.gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N,
.gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_PALMT5_USB_POWER,
+ .gpio_pullup = GPIO_NR_PALMT5_USB_PULLUP,
.gpio_pullup_inverted = 0,
};
@@ -490,9 +491,9 @@
/* setup udc GPIOs initial state */
static void __init palmt5_udc_init(void)
{
- if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1);
- gpio_free(GPIO_NR_PALMT5_USB_POWER);
+ if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1);
+ gpio_free(GPIO_NR_PALMT5_USB_PULLUP);
}
}
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 59d0c1c..14393d0 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -64,6 +64,7 @@
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO95_AC97_nRESET,
/* IrDA */
GPIO40_GPIO, /* ir disable */
@@ -75,7 +76,7 @@
/* USB */
GPIO13_GPIO, /* usb detect */
- GPIO95_GPIO, /* usb power */
+ GPIO93_GPIO, /* usb power */
/* PCMCIA */
GPIO48_nPOE,
@@ -359,7 +360,7 @@
static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
.gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
.gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_PALMTX_USB_POWER,
+ .gpio_pullup = GPIO_NR_PALMTX_USB_PULLUP,
.gpio_pullup_inverted = 0,
};
@@ -514,9 +515,9 @@
/* setup udc GPIOs initial state */
static void __init palmtx_udc_init(void)
{
- if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
- gpio_free(GPIO_NR_PALMTX_USB_POWER);
+ if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1);
+ gpio_free(GPIO_NR_PALMTX_USB_PULLUP);
}
}
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 8eb3830..750c448 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -125,7 +125,7 @@
.set_mode = pxa_osmr0_set_mode,
};
-static cycle_t pxa_read_oscr(void)
+static cycle_t pxa_read_oscr(struct clocksource *cs)
{
return OSCR;
}
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 9ab947c..942e1a7 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -715,7 +715,7 @@
.handler = realview_timer_interrupt,
};
-static cycle_t realview_get_cycles(void)
+static cycle_t realview_get_cycles(struct clocksource *cs)
{
return ~readl(timer3_va_base + TIMER_VALUE);
}
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 332bd32..8f0d37d 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -52,7 +52,6 @@
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/udc.h>
-#include <plat/iic.h>
static struct map_desc jive_iodesc[] __initdata = {
};
@@ -278,7 +277,7 @@
#define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
#define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
-struct s3c2410fb_display jive_vgg2432a4_display[] = {
+static struct s3c2410fb_display jive_vgg2432a4_display[] = {
[0] = {
.width = LCD_XRES,
.height = LCD_YRES,
@@ -311,7 +310,7 @@
#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
-struct s3c2410fb_mach_info jive_lcd_config = {
+static struct s3c2410fb_mach_info jive_lcd_config = {
.displays = jive_vgg2432a4_display,
.num_displays = ARRAY_SIZE(jive_vgg2432a4_display),
.default_display = 0,
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index b05d56e..9c6abf9 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -243,7 +243,7 @@
/* IDE channels */
-struct pata_platform_info anubis_ide_platdata = {
+static struct pata_platform_info anubis_ide_platdata = {
.ioport_shift = 5,
};
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 41a00f5..c8a4668 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -413,7 +413,6 @@
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = osiris_map_io,
- .init_machine = osiris_init,
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
.timer = &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 25f7935..7f473e4 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -166,6 +166,10 @@
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+ gpio_request(S3C64XX_GPN(5), "LCD power");
+ gpio_request(S3C64XX_GPF(13), "LCD power");
+ gpio_request(S3C64XX_GPF(15), "LCD power");
+
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 5657766..1f929c3 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -948,7 +948,7 @@
.handler = versatile_timer_interrupt,
};
-static cycle_t versatile_get_cycles(void)
+static cycle_t versatile_get_cycles(struct clocksource *cs)
{
return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
}
diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
index 83fb72c4..599217b 100644
--- a/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
@@ -27,6 +27,4 @@
unsigned int flags;
};
-int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata);
-
#endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index ab838cfe..57e927a 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -518,6 +518,8 @@
*/
#define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI3_SCLK__RTS3 IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI3_SPI_RDY__CTS3 IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
@@ -558,6 +560,16 @@
#define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
#define MX31_PIN_LD0__LD0 IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD1__LD1 IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD2__LD2 IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC)
@@ -585,6 +597,42 @@
#define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
#define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LCS0__GPI03_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_I2C_CLK__SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
* cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index c02b8fc..518a365 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -45,7 +45,7 @@
#define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS)
-extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
+extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
/* all normal IRQs can be FIQs */
#define FIQ_START 0
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index e8c4cf5..8b070a0 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -54,9 +54,6 @@
#define IRAM_BASE_ADDR 0xFFFFE800 /* internal ram */
-/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
-#define ARCH_NR_GPIOS (6*32 + 16)
-
/* fixed interrupt numbers */
#define MXC_INT_USBCTRL 58
#define MXC_INT_USBCTRL 58
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 6e7578a..0fb68a5 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -50,23 +50,27 @@
#define IIM_PROD_REV_SH 3
#define IIM_PROD_REV_LEN 5
-#ifdef CONFIG_MXC_IRQ_PRIOR
-void imx_irq_set_priority(unsigned char irq, unsigned char prio)
+int imx_irq_set_priority(unsigned char irq, unsigned char prio)
{
+#ifdef CONFIG_MXC_IRQ_PRIOR
unsigned int temp;
unsigned int mask = 0x0F << irq % 8 * 4;
- if (irq > 63)
- return;
+ if (irq >= MXC_INTERNAL_IRQS)
+ return -EINVAL;;
temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
temp &= ~mask;
temp |= prio & mask;
__raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+
+ return 0;
+#else
+ return -ENOSYS;
+#endif
}
EXPORT_SYMBOL(imx_irq_set_priority);
-#endif
#ifdef CONFIG_FIQ
int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index ef1b3cd..dab3357 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -36,7 +36,7 @@
/* clock source */
-static cycle_t mxc_get_cycles(void)
+static cycle_t mxc_get_cycles(struct clocksource *cs)
{
return __raw_readl(TIMER_BASE + MXC_TCN);
}
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index d179714..433021f 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -185,7 +185,7 @@
#include <linux/clocksource.h>
-static cycle_t omap_32k_read(void)
+static cycle_t omap_32k_read(struct clocksource *cs)
{
return omap_readl(TIMER_32K_SYNCHRONIZED);
}
@@ -207,7 +207,7 @@
{
unsigned long long ret;
- ret = (unsigned long long)omap_32k_read();
+ ret = (unsigned long long)omap_32k_read(&clocksource_32k);
ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
return ret;
}
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 6fa2923..2faf9db 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -41,7 +41,7 @@
/*
* Clocksource handling.
*/
-static cycle_t orion_clksrc_read(void)
+static cycle_t orion_clksrc_read(struct clocksource *cs)
{
return 0xffffffff - readl(TIMER0_VAL);
}
diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c
index 7642b97..08044de 100644
--- a/arch/arm/plat-s3c/gpio-config.c
+++ b/arch/arm/plat-s3c/gpio-config.c
@@ -13,6 +13,7 @@
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/io.h>
@@ -38,6 +39,7 @@
return ret;
}
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
{
@@ -56,6 +58,7 @@
return ret;
}
+EXPORT_SYMBOL(s3c_gpio_setpull);
#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip,
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 6b1b523..26f0cec 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -34,6 +34,7 @@
extern struct platform_device s3c_device_rtc;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_hwmon;
extern struct platform_device s3c_device_hsmmc0;
extern struct platform_device s3c_device_hsmmc1;
extern struct platform_device s3c_device_hsmmc2;
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 9a5c767..91adfa7 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -100,7 +100,7 @@
readl(adc->regs + S3C2410_ADCDLY));
}
-void s3c_adc_try(struct adc_device *adc)
+static void s3c_adc_try(struct adc_device *adc)
{
struct s3c_adc_client *next = adc->ts_pend;
@@ -190,6 +190,23 @@
void s3c_adc_release(struct s3c_adc_client *client)
{
/* We should really check that nothing is in progress. */
+ if (adc_dev->cur == client)
+ adc_dev->cur = NULL;
+ if (adc_dev->ts_pend == client)
+ adc_dev->ts_pend = NULL;
+ else {
+ struct list_head *p, *n;
+ struct s3c_adc_client *tmp;
+
+ list_for_each_safe(p, n, &adc_pending) {
+ tmp = list_entry(p, struct s3c_adc_client, pend);
+ if (tmp == client)
+ list_del(&tmp->pend);
+ }
+ }
+
+ if (adc_dev->cur == NULL)
+ s3c_adc_try(adc_dev);
kfree(client);
}
EXPORT_SYMBOL_GPL(s3c_adc_release);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 94a341a..5c0491b 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -19,7 +19,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <plat/gpio-core.h>
+#include <mach/gpio-core.h>
#include <mach/hardware.h>
#include <asm/irq.h>
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index 0ff46bf..f27aa3b 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -18,7 +18,7 @@
#include <mach/pm.h>
-static cycle_t read_cycle_count(void)
+static cycle_t read_cycle_count(struct clocksource *cs)
{
return (cycle_t)sysreg_read(COUNT);
}
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 0ed2bad..2764612 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -58,16 +58,11 @@
return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
}
-static cycle_t read_cycles(void)
+static cycle_t read_cycles(struct clocksource *cs)
{
return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
}
-unsigned long long sched_clock(void)
-{
- return cycles_2_ns(read_cycles());
-}
-
static struct clocksource clocksource_bfin = {
.name = "bfin_cycles",
.rating = 350,
@@ -77,6 +72,11 @@
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+unsigned long long sched_clock(void)
+{
+ return cycles_2_ns(read_cycles(&clocksource_bfin));
+}
+
static int __init bfin_clocksource_init(void)
{
set_cyc2ns_scale(get_cclk() / 1000);
diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
index 0669e13..55e4fab 100644
--- a/arch/frv/kernel/setup.c
+++ b/arch/frv/kernel/setup.c
@@ -46,7 +46,6 @@
#include <asm/io.h>
#ifdef CONFIG_BLK_DEV_INITRD
-#include <linux/blk.h>
#include <asm/pgtable.h>
#endif
diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c
index 0f41c3a..c0dcec6 100644
--- a/arch/frv/mb93090-mb00/pci-vdk.c
+++ b/arch/frv/mb93090-mb00/pci-vdk.c
@@ -31,6 +31,29 @@
struct pci_ops *__nongpreldata pci_root_ops;
/*
+ * The accessible PCI window does not cover the entire CPU address space, but
+ * there are devices we want to access outside of that window, so we need to
+ * insert specific PCI bus resources instead of using the platform-level bus
+ * resources directly for the PCI root bus.
+ *
+ * These are configured and inserted by pcibios_init() and are attached to the
+ * root bus by pcibios_fixup_bus().
+ */
+static struct resource pci_ioport_resource = {
+ .name = "PCI IO",
+ .start = 0,
+ .end = IO_SPACE_LIMIT,
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource pci_iomem_resource = {
+ .name = "PCI mem",
+ .start = 0,
+ .end = -1,
+ .flags = IORESOURCE_MEM,
+};
+
+/*
* Functions for accessing PCI configuration space
*/
@@ -304,6 +327,12 @@
#if 0
printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
#endif
+
+ if (bus->number == 0) {
+ bus->resource[0] = &pci_ioport_resource;
+ bus->resource[1] = &pci_iomem_resource;
+ }
+
pci_read_bridge_bases(bus);
if (bus->number == 0) {
@@ -350,28 +379,36 @@
/* enable PCI arbitration */
__reg_MB86943_pci_arbiter = MB86943_PCIARB_EN;
- ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
- ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
- ioport_resource.end += ioport_resource.start;
+ pci_ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
+ pci_ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
+ pci_ioport_resource.end += pci_ioport_resource.start;
printk("PCI IO window: %08llx-%08llx\n",
- (unsigned long long) ioport_resource.start,
- (unsigned long long) ioport_resource.end);
+ (unsigned long long) pci_ioport_resource.start,
+ (unsigned long long) pci_ioport_resource.end);
- iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
+ pci_iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
+ pci_iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
+ pci_iomem_resource.end += pci_iomem_resource.start;
- /* Reserve somewhere to write to flush posted writes. */
- iomem_resource.start += 0x400;
-
- iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
- iomem_resource.end += iomem_resource.start;
+ /* Reserve somewhere to write to flush posted writes. This is used by
+ * __flush_PCI_writes() from asm/io.h to force the write FIFO in the
+ * CPU-PCI bridge to flush as this doesn't happen automatically when a
+ * read is performed on the MB93090 development kit motherboard.
+ */
+ pci_iomem_resource.start += 0x400;
printk("PCI MEM window: %08llx-%08llx\n",
- (unsigned long long) iomem_resource.start,
- (unsigned long long) iomem_resource.end);
+ (unsigned long long) pci_iomem_resource.start,
+ (unsigned long long) pci_iomem_resource.end);
printk("PCI DMA memory: %08lx-%08lx\n",
dma_coherent_mem_start, dma_coherent_mem_end);
+ if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
+ panic("Unable to insert PCI IOMEM resource\n");
+ if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
+ panic("Unable to insert PCI IOPORT resource\n");
+
if (!pci_probe)
return -ENXIO;
diff --git a/include/asm-h8300/timer.h b/arch/h8300/include/asm/timer.h
similarity index 100%
rename from include/asm-h8300/timer.h
rename to arch/h8300/include/asm/timer.h
diff --git a/arch/ia64/include/asm/paravirt_privop.h b/arch/ia64/include/asm/paravirt_privop.h
index 3d29511..8f6cb11 100644
--- a/arch/ia64/include/asm/paravirt_privop.h
+++ b/arch/ia64/include/asm/paravirt_privop.h
@@ -445,7 +445,6 @@
register unsigned long ia64_intri_res asm ("r8"); \
register unsigned long __reg asm ("r8") = (reg); \
\
- BUILD_BUG_ON(!__builtin_constant_p(reg)); \
asm volatile (paravirt_alt_bundle(__PARAVIRT_BR, \
PARAVIRT_TYPE(GETREG) \
+ (reg)) \
@@ -464,7 +463,6 @@
register unsigned long ia64_clobber1 asm ("r8"); \
register unsigned long ia64_clobber2 asm ("r9"); \
\
- BUILD_BUG_ON(!__builtin_constant_p(reg)); \
asm volatile (paravirt_alt_bundle(__PARAVIRT_BR, \
PARAVIRT_TYPE(SETREG) \
+ (reg)) \
diff --git a/arch/ia64/include/asm/smp.h b/arch/ia64/include/asm/smp.h
index 5984083..d217d1d 100644
--- a/arch/ia64/include/asm/smp.h
+++ b/arch/ia64/include/asm/smp.h
@@ -58,7 +58,7 @@
extern char no_int_routing __devinitdata;
extern cpumask_t cpu_core_map[NR_CPUS];
-DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+DECLARE_PER_CPU_SHARED_ALIGNED(cpumask_t, cpu_sibling_map);
extern int smp_num_siblings;
extern void __iomem *ipi_base_addr;
extern unsigned char smp_int_redirect;
diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c
index 790ef0d8..71e3586 100644
--- a/arch/ia64/kernel/cyclone.c
+++ b/arch/ia64/kernel/cyclone.c
@@ -21,7 +21,7 @@
static void __iomem *cyclone_mc;
-static cycle_t read_cyclone(void)
+static cycle_t read_cyclone(struct clocksource *cs)
{
return (cycle_t)readq((void __iomem *)cyclone_mc);
}
diff --git a/arch/ia64/kernel/pci-swiotlb.c b/arch/ia64/kernel/pci-swiotlb.c
index 573f02c..285aae8 100644
--- a/arch/ia64/kernel/pci-swiotlb.c
+++ b/arch/ia64/kernel/pci-swiotlb.c
@@ -16,7 +16,7 @@
static void *ia64_swiotlb_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
{
- if (dev->coherent_dma_mask != DMA_64BIT_MASK)
+ if (dev->coherent_dma_mask != DMA_BIT_MASK(64))
gfp |= GFP_DMA;
return swiotlb_alloc_coherent(dev, size, dma_handle, gfp);
}
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 2ea4199d..5230eaa 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -225,6 +225,7 @@
{
platform_send_ipi(cpu, IA64_IPI_RESCHEDULE, IA64_IPI_DM_INT, 0);
}
+EXPORT_SYMBOL_GPL(smp_send_reschedule);
/*
* Called with preemption disabled.
@@ -300,15 +301,12 @@
return;
}
+ smp_call_function_mask(mm->cpu_vm_mask,
+ (void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
+ local_irq_disable();
+ local_finish_flush_tlb_mm(mm);
+ local_irq_enable();
preempt_enable();
- /*
- * We could optimize this further by using mm->cpu_vm_mask to track which CPUs
- * have been running in the address space. It's not clear that this is worth the
- * trouble though: to avoid races, we have to raise the IPI on the target CPU
- * anyhow, and once a CPU is interrupted, the cost of local_flush_tlb_all() is
- * rather trivial.
- */
- on_each_cpu((void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
}
void arch_send_call_function_single_ipi(int cpu)
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 641c8b6..604c1a3 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -33,7 +33,7 @@
#include "fsyscall_gtod_data.h"
-static cycle_t itc_get_cycles(void);
+static cycle_t itc_get_cycles(struct clocksource *cs);
struct fsyscall_gtod_data_t fsyscall_gtod_data = {
.lock = SEQLOCK_UNLOCKED,
@@ -383,7 +383,7 @@
}
}
-static cycle_t itc_get_cycles(void)
+static cycle_t itc_get_cycles(struct clocksource *cs)
{
u64 lcycle, now, ret;
diff --git a/arch/ia64/sn/kernel/sn2/timer.c b/arch/ia64/sn/kernel/sn2/timer.c
index cf67fc5..21d6f09 100644
--- a/arch/ia64/sn/kernel/sn2/timer.c
+++ b/arch/ia64/sn/kernel/sn2/timer.c
@@ -23,7 +23,7 @@
extern unsigned long sn_rtc_cycles_per_second;
-static cycle_t read_sn2(void)
+static cycle_t read_sn2(struct clocksource *cs)
{
return (cycle_t)readq(RTC_COUNTER_ADDR);
}
diff --git a/include/asm-m32r/Kbuild b/arch/m32r/include/asm/Kbuild
similarity index 100%
rename from include/asm-m32r/Kbuild
rename to arch/m32r/include/asm/Kbuild
diff --git a/include/asm-m32r/addrspace.h b/arch/m32r/include/asm/addrspace.h
similarity index 100%
rename from include/asm-m32r/addrspace.h
rename to arch/m32r/include/asm/addrspace.h
diff --git a/include/asm-m32r/assembler.h b/arch/m32r/include/asm/assembler.h
similarity index 100%
rename from include/asm-m32r/assembler.h
rename to arch/m32r/include/asm/assembler.h
diff --git a/include/asm-m32r/atomic.h b/arch/m32r/include/asm/atomic.h
similarity index 100%
rename from include/asm-m32r/atomic.h
rename to arch/m32r/include/asm/atomic.h
diff --git a/include/asm-m32r/auxvec.h b/arch/m32r/include/asm/auxvec.h
similarity index 100%
rename from include/asm-m32r/auxvec.h
rename to arch/m32r/include/asm/auxvec.h
diff --git a/include/asm-m32r/bitops.h b/arch/m32r/include/asm/bitops.h
similarity index 100%
rename from include/asm-m32r/bitops.h
rename to arch/m32r/include/asm/bitops.h
diff --git a/include/asm-m32r/bug.h b/arch/m32r/include/asm/bug.h
similarity index 100%
rename from include/asm-m32r/bug.h
rename to arch/m32r/include/asm/bug.h
diff --git a/include/asm-m32r/bugs.h b/arch/m32r/include/asm/bugs.h
similarity index 100%
rename from include/asm-m32r/bugs.h
rename to arch/m32r/include/asm/bugs.h
diff --git a/include/asm-m32r/byteorder.h b/arch/m32r/include/asm/byteorder.h
similarity index 100%
rename from include/asm-m32r/byteorder.h
rename to arch/m32r/include/asm/byteorder.h
diff --git a/include/asm-m32r/cache.h b/arch/m32r/include/asm/cache.h
similarity index 100%
rename from include/asm-m32r/cache.h
rename to arch/m32r/include/asm/cache.h
diff --git a/include/asm-m32r/cachectl.h b/arch/m32r/include/asm/cachectl.h
similarity index 100%
rename from include/asm-m32r/cachectl.h
rename to arch/m32r/include/asm/cachectl.h
diff --git a/include/asm-m32r/cacheflush.h b/arch/m32r/include/asm/cacheflush.h
similarity index 100%
rename from include/asm-m32r/cacheflush.h
rename to arch/m32r/include/asm/cacheflush.h
diff --git a/include/asm-m32r/checksum.h b/arch/m32r/include/asm/checksum.h
similarity index 100%
rename from include/asm-m32r/checksum.h
rename to arch/m32r/include/asm/checksum.h
diff --git a/include/asm-m32r/cputime.h b/arch/m32r/include/asm/cputime.h
similarity index 100%
rename from include/asm-m32r/cputime.h
rename to arch/m32r/include/asm/cputime.h
diff --git a/include/asm-m32r/current.h b/arch/m32r/include/asm/current.h
similarity index 100%
rename from include/asm-m32r/current.h
rename to arch/m32r/include/asm/current.h
diff --git a/include/asm-m32r/delay.h b/arch/m32r/include/asm/delay.h
similarity index 100%
rename from include/asm-m32r/delay.h
rename to arch/m32r/include/asm/delay.h
diff --git a/include/asm-m32r/device.h b/arch/m32r/include/asm/device.h
similarity index 100%
rename from include/asm-m32r/device.h
rename to arch/m32r/include/asm/device.h
diff --git a/include/asm-m32r/div64.h b/arch/m32r/include/asm/div64.h
similarity index 100%
rename from include/asm-m32r/div64.h
rename to arch/m32r/include/asm/div64.h
diff --git a/include/asm-m32r/dma.h b/arch/m32r/include/asm/dma.h
similarity index 100%
rename from include/asm-m32r/dma.h
rename to arch/m32r/include/asm/dma.h
diff --git a/include/asm-m32r/elf.h b/arch/m32r/include/asm/elf.h
similarity index 100%
rename from include/asm-m32r/elf.h
rename to arch/m32r/include/asm/elf.h
diff --git a/include/asm-m32r/emergency-restart.h b/arch/m32r/include/asm/emergency-restart.h
similarity index 100%
rename from include/asm-m32r/emergency-restart.h
rename to arch/m32r/include/asm/emergency-restart.h
diff --git a/include/asm-m32r/errno.h b/arch/m32r/include/asm/errno.h
similarity index 100%
rename from include/asm-m32r/errno.h
rename to arch/m32r/include/asm/errno.h
diff --git a/include/asm-m32r/fb.h b/arch/m32r/include/asm/fb.h
similarity index 100%
rename from include/asm-m32r/fb.h
rename to arch/m32r/include/asm/fb.h
diff --git a/include/asm-m32r/fcntl.h b/arch/m32r/include/asm/fcntl.h
similarity index 100%
rename from include/asm-m32r/fcntl.h
rename to arch/m32r/include/asm/fcntl.h
diff --git a/include/asm-m32r/flat.h b/arch/m32r/include/asm/flat.h
similarity index 100%
rename from include/asm-m32r/flat.h
rename to arch/m32r/include/asm/flat.h
diff --git a/include/asm-m32r/ftrace.h b/arch/m32r/include/asm/ftrace.h
similarity index 100%
rename from include/asm-m32r/ftrace.h
rename to arch/m32r/include/asm/ftrace.h
diff --git a/include/asm-m32r/futex.h b/arch/m32r/include/asm/futex.h
similarity index 100%
rename from include/asm-m32r/futex.h
rename to arch/m32r/include/asm/futex.h
diff --git a/include/asm-m32r/hardirq.h b/arch/m32r/include/asm/hardirq.h
similarity index 100%
rename from include/asm-m32r/hardirq.h
rename to arch/m32r/include/asm/hardirq.h
diff --git a/include/asm-m32r/hw_irq.h b/arch/m32r/include/asm/hw_irq.h
similarity index 100%
rename from include/asm-m32r/hw_irq.h
rename to arch/m32r/include/asm/hw_irq.h
diff --git a/include/asm-m32r/io.h b/arch/m32r/include/asm/io.h
similarity index 100%
rename from include/asm-m32r/io.h
rename to arch/m32r/include/asm/io.h
diff --git a/include/asm-m32r/ioctl.h b/arch/m32r/include/asm/ioctl.h
similarity index 100%
rename from include/asm-m32r/ioctl.h
rename to arch/m32r/include/asm/ioctl.h
diff --git a/include/asm-m32r/ioctls.h b/arch/m32r/include/asm/ioctls.h
similarity index 100%
rename from include/asm-m32r/ioctls.h
rename to arch/m32r/include/asm/ioctls.h
diff --git a/include/asm-m32r/ipcbuf.h b/arch/m32r/include/asm/ipcbuf.h
similarity index 100%
rename from include/asm-m32r/ipcbuf.h
rename to arch/m32r/include/asm/ipcbuf.h
diff --git a/include/asm-m32r/irq.h b/arch/m32r/include/asm/irq.h
similarity index 100%
rename from include/asm-m32r/irq.h
rename to arch/m32r/include/asm/irq.h
diff --git a/include/asm-m32r/irq_regs.h b/arch/m32r/include/asm/irq_regs.h
similarity index 100%
rename from include/asm-m32r/irq_regs.h
rename to arch/m32r/include/asm/irq_regs.h
diff --git a/include/asm-m32r/kdebug.h b/arch/m32r/include/asm/kdebug.h
similarity index 100%
rename from include/asm-m32r/kdebug.h
rename to arch/m32r/include/asm/kdebug.h
diff --git a/include/asm-m32r/kmap_types.h b/arch/m32r/include/asm/kmap_types.h
similarity index 100%
rename from include/asm-m32r/kmap_types.h
rename to arch/m32r/include/asm/kmap_types.h
diff --git a/include/asm-m32r/linkage.h b/arch/m32r/include/asm/linkage.h
similarity index 100%
rename from include/asm-m32r/linkage.h
rename to arch/m32r/include/asm/linkage.h
diff --git a/include/asm-m32r/local.h b/arch/m32r/include/asm/local.h
similarity index 100%
rename from include/asm-m32r/local.h
rename to arch/m32r/include/asm/local.h
diff --git a/include/asm-m32r/m32102.h b/arch/m32r/include/asm/m32102.h
similarity index 100%
rename from include/asm-m32r/m32102.h
rename to arch/m32r/include/asm/m32102.h
diff --git a/include/asm-m32r/m32104ut/m32104ut_pld.h b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h
similarity index 100%
rename from include/asm-m32r/m32104ut/m32104ut_pld.h
rename to arch/m32r/include/asm/m32104ut/m32104ut_pld.h
diff --git a/include/asm-m32r/m32700ut/m32700ut_lan.h b/arch/m32r/include/asm/m32700ut/m32700ut_lan.h
similarity index 100%
rename from include/asm-m32r/m32700ut/m32700ut_lan.h
rename to arch/m32r/include/asm/m32700ut/m32700ut_lan.h
diff --git a/include/asm-m32r/m32700ut/m32700ut_lcd.h b/arch/m32r/include/asm/m32700ut/m32700ut_lcd.h
similarity index 100%
rename from include/asm-m32r/m32700ut/m32700ut_lcd.h
rename to arch/m32r/include/asm/m32700ut/m32700ut_lcd.h
diff --git a/include/asm-m32r/m32700ut/m32700ut_pld.h b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h
similarity index 100%
rename from include/asm-m32r/m32700ut/m32700ut_pld.h
rename to arch/m32r/include/asm/m32700ut/m32700ut_pld.h
diff --git a/include/asm-m32r/m32r.h b/arch/m32r/include/asm/m32r.h
similarity index 100%
rename from include/asm-m32r/m32r.h
rename to arch/m32r/include/asm/m32r.h
diff --git a/include/asm-m32r/m32r_mp_fpga.h b/arch/m32r/include/asm/m32r_mp_fpga.h
similarity index 100%
rename from include/asm-m32r/m32r_mp_fpga.h
rename to arch/m32r/include/asm/m32r_mp_fpga.h
diff --git a/include/asm-m32r/mappi2/mappi2_pld.h b/arch/m32r/include/asm/mappi2/mappi2_pld.h
similarity index 100%
rename from include/asm-m32r/mappi2/mappi2_pld.h
rename to arch/m32r/include/asm/mappi2/mappi2_pld.h
diff --git a/include/asm-m32r/mappi3/mappi3_pld.h b/arch/m32r/include/asm/mappi3/mappi3_pld.h
similarity index 100%
rename from include/asm-m32r/mappi3/mappi3_pld.h
rename to arch/m32r/include/asm/mappi3/mappi3_pld.h
diff --git a/include/asm-m32r/mc146818rtc.h b/arch/m32r/include/asm/mc146818rtc.h
similarity index 100%
rename from include/asm-m32r/mc146818rtc.h
rename to arch/m32r/include/asm/mc146818rtc.h
diff --git a/include/asm-m32r/mman.h b/arch/m32r/include/asm/mman.h
similarity index 100%
rename from include/asm-m32r/mman.h
rename to arch/m32r/include/asm/mman.h
diff --git a/include/asm-m32r/mmu.h b/arch/m32r/include/asm/mmu.h
similarity index 100%
rename from include/asm-m32r/mmu.h
rename to arch/m32r/include/asm/mmu.h
diff --git a/include/asm-m32r/mmu_context.h b/arch/m32r/include/asm/mmu_context.h
similarity index 100%
rename from include/asm-m32r/mmu_context.h
rename to arch/m32r/include/asm/mmu_context.h
diff --git a/include/asm-m32r/mmzone.h b/arch/m32r/include/asm/mmzone.h
similarity index 100%
rename from include/asm-m32r/mmzone.h
rename to arch/m32r/include/asm/mmzone.h
diff --git a/include/asm-m32r/module.h b/arch/m32r/include/asm/module.h
similarity index 100%
rename from include/asm-m32r/module.h
rename to arch/m32r/include/asm/module.h
diff --git a/include/asm-m32r/msgbuf.h b/arch/m32r/include/asm/msgbuf.h
similarity index 100%
rename from include/asm-m32r/msgbuf.h
rename to arch/m32r/include/asm/msgbuf.h
diff --git a/include/asm-m32r/mutex.h b/arch/m32r/include/asm/mutex.h
similarity index 100%
rename from include/asm-m32r/mutex.h
rename to arch/m32r/include/asm/mutex.h
diff --git a/include/asm-m32r/opsput/opsput_lan.h b/arch/m32r/include/asm/opsput/opsput_lan.h
similarity index 100%
rename from include/asm-m32r/opsput/opsput_lan.h
rename to arch/m32r/include/asm/opsput/opsput_lan.h
diff --git a/include/asm-m32r/opsput/opsput_lcd.h b/arch/m32r/include/asm/opsput/opsput_lcd.h
similarity index 100%
rename from include/asm-m32r/opsput/opsput_lcd.h
rename to arch/m32r/include/asm/opsput/opsput_lcd.h
diff --git a/include/asm-m32r/opsput/opsput_pld.h b/arch/m32r/include/asm/opsput/opsput_pld.h
similarity index 100%
rename from include/asm-m32r/opsput/opsput_pld.h
rename to arch/m32r/include/asm/opsput/opsput_pld.h
diff --git a/include/asm-m32r/page.h b/arch/m32r/include/asm/page.h
similarity index 100%
rename from include/asm-m32r/page.h
rename to arch/m32r/include/asm/page.h
diff --git a/include/asm-m32r/param.h b/arch/m32r/include/asm/param.h
similarity index 100%
rename from include/asm-m32r/param.h
rename to arch/m32r/include/asm/param.h
diff --git a/include/asm-m32r/pci.h b/arch/m32r/include/asm/pci.h
similarity index 100%
rename from include/asm-m32r/pci.h
rename to arch/m32r/include/asm/pci.h
diff --git a/include/asm-m32r/percpu.h b/arch/m32r/include/asm/percpu.h
similarity index 100%
rename from include/asm-m32r/percpu.h
rename to arch/m32r/include/asm/percpu.h
diff --git a/include/asm-m32r/pgalloc.h b/arch/m32r/include/asm/pgalloc.h
similarity index 100%
rename from include/asm-m32r/pgalloc.h
rename to arch/m32r/include/asm/pgalloc.h
diff --git a/include/asm-m32r/pgtable-2level.h b/arch/m32r/include/asm/pgtable-2level.h
similarity index 100%
rename from include/asm-m32r/pgtable-2level.h
rename to arch/m32r/include/asm/pgtable-2level.h
diff --git a/include/asm-m32r/pgtable.h b/arch/m32r/include/asm/pgtable.h
similarity index 100%
rename from include/asm-m32r/pgtable.h
rename to arch/m32r/include/asm/pgtable.h
diff --git a/include/asm-m32r/poll.h b/arch/m32r/include/asm/poll.h
similarity index 100%
rename from include/asm-m32r/poll.h
rename to arch/m32r/include/asm/poll.h
diff --git a/include/asm-m32r/posix_types.h b/arch/m32r/include/asm/posix_types.h
similarity index 100%
rename from include/asm-m32r/posix_types.h
rename to arch/m32r/include/asm/posix_types.h
diff --git a/include/asm-m32r/processor.h b/arch/m32r/include/asm/processor.h
similarity index 100%
rename from include/asm-m32r/processor.h
rename to arch/m32r/include/asm/processor.h
diff --git a/include/asm-m32r/ptrace.h b/arch/m32r/include/asm/ptrace.h
similarity index 100%
rename from include/asm-m32r/ptrace.h
rename to arch/m32r/include/asm/ptrace.h
diff --git a/include/asm-m32r/resource.h b/arch/m32r/include/asm/resource.h
similarity index 100%
rename from include/asm-m32r/resource.h
rename to arch/m32r/include/asm/resource.h
diff --git a/include/asm-m32r/rtc.h b/arch/m32r/include/asm/rtc.h
similarity index 100%
rename from include/asm-m32r/rtc.h
rename to arch/m32r/include/asm/rtc.h
diff --git a/include/asm-m32r/s1d13806.h b/arch/m32r/include/asm/s1d13806.h
similarity index 100%
rename from include/asm-m32r/s1d13806.h
rename to arch/m32r/include/asm/s1d13806.h
diff --git a/include/asm-m32r/scatterlist.h b/arch/m32r/include/asm/scatterlist.h
similarity index 100%
rename from include/asm-m32r/scatterlist.h
rename to arch/m32r/include/asm/scatterlist.h
diff --git a/include/asm-m32r/sections.h b/arch/m32r/include/asm/sections.h
similarity index 100%
rename from include/asm-m32r/sections.h
rename to arch/m32r/include/asm/sections.h
diff --git a/include/asm-m32r/segment.h b/arch/m32r/include/asm/segment.h
similarity index 100%
rename from include/asm-m32r/segment.h
rename to arch/m32r/include/asm/segment.h
diff --git a/include/asm-m32r/sembuf.h b/arch/m32r/include/asm/sembuf.h
similarity index 100%
rename from include/asm-m32r/sembuf.h
rename to arch/m32r/include/asm/sembuf.h
diff --git a/include/asm-m32r/serial.h b/arch/m32r/include/asm/serial.h
similarity index 100%
rename from include/asm-m32r/serial.h
rename to arch/m32r/include/asm/serial.h
diff --git a/include/asm-m32r/setup.h b/arch/m32r/include/asm/setup.h
similarity index 100%
rename from include/asm-m32r/setup.h
rename to arch/m32r/include/asm/setup.h
diff --git a/include/asm-m32r/shmbuf.h b/arch/m32r/include/asm/shmbuf.h
similarity index 100%
rename from include/asm-m32r/shmbuf.h
rename to arch/m32r/include/asm/shmbuf.h
diff --git a/include/asm-m32r/shmparam.h b/arch/m32r/include/asm/shmparam.h
similarity index 100%
rename from include/asm-m32r/shmparam.h
rename to arch/m32r/include/asm/shmparam.h
diff --git a/include/asm-m32r/sigcontext.h b/arch/m32r/include/asm/sigcontext.h
similarity index 100%
rename from include/asm-m32r/sigcontext.h
rename to arch/m32r/include/asm/sigcontext.h
diff --git a/include/asm-m32r/siginfo.h b/arch/m32r/include/asm/siginfo.h
similarity index 100%
rename from include/asm-m32r/siginfo.h
rename to arch/m32r/include/asm/siginfo.h
diff --git a/include/asm-m32r/signal.h b/arch/m32r/include/asm/signal.h
similarity index 100%
rename from include/asm-m32r/signal.h
rename to arch/m32r/include/asm/signal.h
diff --git a/include/asm-m32r/smp.h b/arch/m32r/include/asm/smp.h
similarity index 100%
rename from include/asm-m32r/smp.h
rename to arch/m32r/include/asm/smp.h
diff --git a/include/asm-m32r/socket.h b/arch/m32r/include/asm/socket.h
similarity index 100%
rename from include/asm-m32r/socket.h
rename to arch/m32r/include/asm/socket.h
diff --git a/include/asm-m32r/sockios.h b/arch/m32r/include/asm/sockios.h
similarity index 100%
rename from include/asm-m32r/sockios.h
rename to arch/m32r/include/asm/sockios.h
diff --git a/include/asm-m32r/spinlock.h b/arch/m32r/include/asm/spinlock.h
similarity index 100%
rename from include/asm-m32r/spinlock.h
rename to arch/m32r/include/asm/spinlock.h
diff --git a/include/asm-m32r/spinlock_types.h b/arch/m32r/include/asm/spinlock_types.h
similarity index 100%
rename from include/asm-m32r/spinlock_types.h
rename to arch/m32r/include/asm/spinlock_types.h
diff --git a/include/asm-m32r/stat.h b/arch/m32r/include/asm/stat.h
similarity index 100%
rename from include/asm-m32r/stat.h
rename to arch/m32r/include/asm/stat.h
diff --git a/include/asm-m32r/statfs.h b/arch/m32r/include/asm/statfs.h
similarity index 100%
rename from include/asm-m32r/statfs.h
rename to arch/m32r/include/asm/statfs.h
diff --git a/include/asm-m32r/string.h b/arch/m32r/include/asm/string.h
similarity index 100%
rename from include/asm-m32r/string.h
rename to arch/m32r/include/asm/string.h
diff --git a/include/asm-m32r/swab.h b/arch/m32r/include/asm/swab.h
similarity index 100%
rename from include/asm-m32r/swab.h
rename to arch/m32r/include/asm/swab.h
diff --git a/include/asm-m32r/syscall.h b/arch/m32r/include/asm/syscall.h
similarity index 100%
rename from include/asm-m32r/syscall.h
rename to arch/m32r/include/asm/syscall.h
diff --git a/include/asm-m32r/system.h b/arch/m32r/include/asm/system.h
similarity index 100%
rename from include/asm-m32r/system.h
rename to arch/m32r/include/asm/system.h
diff --git a/include/asm-m32r/termbits.h b/arch/m32r/include/asm/termbits.h
similarity index 100%
rename from include/asm-m32r/termbits.h
rename to arch/m32r/include/asm/termbits.h
diff --git a/include/asm-m32r/termios.h b/arch/m32r/include/asm/termios.h
similarity index 100%
rename from include/asm-m32r/termios.h
rename to arch/m32r/include/asm/termios.h
diff --git a/include/asm-m32r/thread_info.h b/arch/m32r/include/asm/thread_info.h
similarity index 100%
rename from include/asm-m32r/thread_info.h
rename to arch/m32r/include/asm/thread_info.h
diff --git a/include/asm-m32r/timex.h b/arch/m32r/include/asm/timex.h
similarity index 100%
rename from include/asm-m32r/timex.h
rename to arch/m32r/include/asm/timex.h
diff --git a/include/asm-m32r/tlb.h b/arch/m32r/include/asm/tlb.h
similarity index 100%
rename from include/asm-m32r/tlb.h
rename to arch/m32r/include/asm/tlb.h
diff --git a/include/asm-m32r/tlbflush.h b/arch/m32r/include/asm/tlbflush.h
similarity index 100%
rename from include/asm-m32r/tlbflush.h
rename to arch/m32r/include/asm/tlbflush.h
diff --git a/include/asm-m32r/topology.h b/arch/m32r/include/asm/topology.h
similarity index 100%
rename from include/asm-m32r/topology.h
rename to arch/m32r/include/asm/topology.h
diff --git a/include/asm-m32r/types.h b/arch/m32r/include/asm/types.h
similarity index 100%
rename from include/asm-m32r/types.h
rename to arch/m32r/include/asm/types.h
diff --git a/include/asm-m32r/uaccess.h b/arch/m32r/include/asm/uaccess.h
similarity index 100%
rename from include/asm-m32r/uaccess.h
rename to arch/m32r/include/asm/uaccess.h
diff --git a/include/asm-m32r/ucontext.h b/arch/m32r/include/asm/ucontext.h
similarity index 100%
rename from include/asm-m32r/ucontext.h
rename to arch/m32r/include/asm/ucontext.h
diff --git a/include/asm-m32r/unaligned.h b/arch/m32r/include/asm/unaligned.h
similarity index 100%
rename from include/asm-m32r/unaligned.h
rename to arch/m32r/include/asm/unaligned.h
diff --git a/include/asm-m32r/unistd.h b/arch/m32r/include/asm/unistd.h
similarity index 100%
rename from include/asm-m32r/unistd.h
rename to arch/m32r/include/asm/unistd.h
diff --git a/include/asm-m32r/user.h b/arch/m32r/include/asm/user.h
similarity index 100%
rename from include/asm-m32r/user.h
rename to arch/m32r/include/asm/user.h
diff --git a/include/asm-m32r/vga.h b/arch/m32r/include/asm/vga.h
similarity index 100%
rename from include/asm-m32r/vga.h
rename to arch/m32r/include/asm/vga.h
diff --git a/include/asm-m32r/xor.h b/arch/m32r/include/asm/xor.h
similarity index 100%
rename from include/asm-m32r/xor.h
rename to arch/m32r/include/asm/xor.h
diff --git a/arch/m68knommu/platform/68328/timers.c b/arch/m68knommu/platform/68328/timers.c
index 6bafefa..309f7259 100644
--- a/arch/m68knommu/platform/68328/timers.c
+++ b/arch/m68knommu/platform/68328/timers.c
@@ -75,7 +75,7 @@
/***************************************************************************/
-static cycle_t m68328_read_clk(void)
+static cycle_t m68328_read_clk(struct clocksource *cs)
{
unsigned long flags;
u32 cycles;
diff --git a/arch/m68knommu/platform/coldfire/dma_timer.c b/arch/m68knommu/platform/coldfire/dma_timer.c
index 772578b..a5f5628 100644
--- a/arch/m68knommu/platform/coldfire/dma_timer.c
+++ b/arch/m68knommu/platform/coldfire/dma_timer.c
@@ -34,7 +34,7 @@
#define DMA_DTMR_CLK_DIV_16 (2 << 1)
#define DMA_DTMR_ENABLE (1 << 0)
-static cycle_t cf_dt_get_cycles(void)
+static cycle_t cf_dt_get_cycles(struct clocksource *cs)
{
return __raw_readl(DTCN0);
}
diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c
index 2a12e7f..61b9621 100644
--- a/arch/m68knommu/platform/coldfire/pit.c
+++ b/arch/m68knommu/platform/coldfire/pit.c
@@ -125,7 +125,7 @@
/***************************************************************************/
-static cycle_t pit_read_clk(void)
+static cycle_t pit_read_clk(struct clocksource *cs)
{
unsigned long flags;
u32 cycles;
diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c
index 454f254..1ba8a37 100644
--- a/arch/m68knommu/platform/coldfire/timers.c
+++ b/arch/m68knommu/platform/coldfire/timers.c
@@ -78,7 +78,7 @@
/***************************************************************************/
-static cycle_t mcftmr_read_clk(void)
+static cycle_t mcftmr_read_clk(struct clocksource *cs)
{
unsigned long flags;
u32 cycles;
diff --git a/arch/microblaze/include/asm/auxvec.h b/arch/microblaze/include/asm/auxvec.h
index e69de29..8b13789 100644
--- a/arch/microblaze/include/asm/auxvec.h
+++ b/arch/microblaze/include/asm/auxvec.h
@@ -0,0 +1 @@
+
diff --git a/arch/microblaze/include/asm/cputable.h b/arch/microblaze/include/asm/cputable.h
index e69de29..8b13789 100644
--- a/arch/microblaze/include/asm/cputable.h
+++ b/arch/microblaze/include/asm/cputable.h
@@ -0,0 +1 @@
+
diff --git a/arch/microblaze/include/asm/ftrace.h b/arch/microblaze/include/asm/ftrace.h
new file mode 100644
index 0000000..8b13789
--- /dev/null
+++ b/arch/microblaze/include/asm/ftrace.h
@@ -0,0 +1 @@
+
diff --git a/arch/microblaze/include/asm/hw_irq.h b/arch/microblaze/include/asm/hw_irq.h
index e69de29..8b13789 100644
--- a/arch/microblaze/include/asm/hw_irq.h
+++ b/arch/microblaze/include/asm/hw_irq.h
@@ -0,0 +1 @@
+
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index cfab034..8b5853e 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -12,7 +12,6 @@
#include <asm/byteorder.h>
#include <asm/page.h>
#include <linux/types.h>
-#include <asm/page.h>
#define IO_SPACE_LIMIT (0xFFFFFFFF)
diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h
index f919b6b..8259368 100644
--- a/arch/microblaze/include/asm/socket.h
+++ b/arch/microblaze/include/asm/socket.h
@@ -63,4 +63,7 @@
#define SO_MARK 36
+#define SO_TIMESTAMPING 37
+#define SCM_TIMESTAMPING SO_TIMESTAMPING
+
#endif /* _ASM_MICROBLAZE_SOCKET_H */
diff --git a/arch/microblaze/include/asm/user.h b/arch/microblaze/include/asm/user.h
index e69de29..8b13789 100644
--- a/arch/microblaze/include/asm/user.h
+++ b/arch/microblaze/include/asm/user.h
@@ -0,0 +1 @@
+
diff --git a/arch/microblaze/include/asm/vga.h b/arch/microblaze/include/asm/vga.h
index e69de29..8b13789 100644
--- a/arch/microblaze/include/asm/vga.h
+++ b/arch/microblaze/include/asm/vga.h
@@ -0,0 +1 @@
+
diff --git a/arch/microblaze/kernel/of_device.c b/arch/microblaze/kernel/of_device.c
index 717edf4..9a0f7632 100644
--- a/arch/microblaze/kernel/of_device.c
+++ b/arch/microblaze/kernel/of_device.c
@@ -13,7 +13,6 @@
{
static atomic_t bus_no_reg_magic;
struct device_node *node = dev->node;
- char *name = dev->dev.bus_id;
const u32 *reg;
u64 addr;
int magic;
@@ -25,9 +24,8 @@
if (reg) {
addr = of_translate_address(node, reg);
if (addr != OF_BAD_ADDR) {
- snprintf(name, BUS_ID_SIZE,
- "%llx.%s", (unsigned long long)addr,
- node->name);
+ dev_set_name(&dev->dev, "%llx.%s",
+ (unsigned long long)addr, node->name);
return;
}
}
@@ -37,7 +35,7 @@
* counter (and pray...)
*/
magic = atomic_add_return(1, &bus_no_reg_magic);
- snprintf(name, BUS_ID_SIZE, "%s.%d", node->name, magic - 1);
+ dev_set_name(&dev->dev, "%s.%d", node->name, magic - 1);
}
EXPORT_SYMBOL(of_device_make_bus_id);
@@ -58,7 +56,7 @@
dev->dev.archdata.of_node = np;
if (bus_id)
- strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE);
+ dev_set_name(&dev->dev, bus_id);
else
of_device_make_bus_id(dev);
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 60e9ed7..436f26c 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -115,8 +115,7 @@
{
}
-/* FIXME - here will be a proposed change -> remove nr parameter */
-int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
+int copy_thread(unsigned long clone_flags, unsigned long usp,
unsigned long unused,
struct task_struct *p, struct pt_regs *regs)
{
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 475b1fa..34c4871 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -39,7 +39,6 @@
#include <asm/system.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
-#include <linux/pci.h>
#include <asm/sections.h>
#include <asm/pci-bridge.h>
diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c
index 3171e39..b86aa62 100644
--- a/arch/microblaze/kernel/ptrace.c
+++ b/arch/microblaze/kernel/ptrace.c
@@ -32,7 +32,6 @@
#include <linux/signal.h>
#include <linux/errno.h>
-#include <linux/ptrace.h>
#include <asm/processor.h>
#include <linux/uaccess.h>
#include <asm/asm-offsets.h>
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index ff347b9..3889cf4 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -37,7 +37,6 @@
#include <linux/uaccess.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
-#include <linux/signal.h>
#include <linux/syscalls.h>
#include <asm/cacheflush.h>
#include <asm/syscalls.h>
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index d90b548..ba0568c 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -29,9 +29,7 @@
#include <linux/module.h>
#include <linux/err.h>
#include <linux/fs.h>
-#include <linux/ipc.h>
#include <linux/semaphore.h>
-#include <linux/syscalls.h>
#include <linux/uaccess.h>
#include <linux/unistd.h>
diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c
index eccf7d6..2e911e3 100644
--- a/arch/mips/kernel/cevt-txx9.c
+++ b/arch/mips/kernel/cevt-txx9.c
@@ -22,7 +22,7 @@
static struct txx9_tmr_reg __iomem *txx9_cs_tmrptr;
-static cycle_t txx9_cs_read(void)
+static cycle_t txx9_cs_read(struct clocksource *cs)
{
return __raw_readl(&txx9_cs_tmrptr->trr);
}
diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c
index 868745e..51489f8 100644
--- a/arch/mips/kernel/csrc-bcm1480.c
+++ b/arch/mips/kernel/csrc-bcm1480.c
@@ -28,7 +28,7 @@
#include <asm/sibyte/sb1250.h>
-static cycle_t bcm1480_hpt_read(void)
+static cycle_t bcm1480_hpt_read(struct clocksource *cs)
{
return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
}
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index 1d5f63c..b551f48 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -25,7 +25,7 @@
#include <asm/dec/ioasic.h>
#include <asm/dec/ioasic_addrs.h>
-static cycle_t dec_ioasic_hpt_read(void)
+static cycle_t dec_ioasic_hpt_read(struct clocksource *cs)
{
return ioasic_read(IO_REG_FCTR);
}
@@ -47,13 +47,13 @@
while (!ds1287_timer_state())
;
- start = dec_ioasic_hpt_read();
+ start = dec_ioasic_hpt_read(&clocksource_dec);
while (i--)
while (!ds1287_timer_state())
;
- end = dec_ioasic_hpt_read();
+ end = dec_ioasic_hpt_read(&clocksource_dec);
freq = (end - start) * 10;
printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
index f1a2893..e95a3cd 100644
--- a/arch/mips/kernel/csrc-r4k.c
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -10,7 +10,7 @@
#include <asm/time.h>
-static cycle_t c0_hpt_read(void)
+static cycle_t c0_hpt_read(struct clocksource *cs)
{
return read_c0_count();
}
diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c
index 92212bb..d14d3d1 100644
--- a/arch/mips/kernel/csrc-sb1250.c
+++ b/arch/mips/kernel/csrc-sb1250.c
@@ -33,7 +33,7 @@
* The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
* again.
*/
-static cycle_t sb1250_hpt_read(void)
+static cycle_t sb1250_hpt_read(struct clocksource *cs)
{
unsigned int count;
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 689719e..ed20e7f 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -128,7 +128,7 @@
* to just read by itself. So use jiffies to emulate a free
* running counter:
*/
-static cycle_t pit_read(void)
+static cycle_t pit_read(struct clocksource *cs)
{
unsigned long flags;
int count;
diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/nxp/pnx8550/common/time.c
index cf293b2..8df43e9 100644
--- a/arch/mips/nxp/pnx8550/common/time.c
+++ b/arch/mips/nxp/pnx8550/common/time.c
@@ -35,7 +35,7 @@
static unsigned long cpj;
-static cycle_t hpt_read(void)
+static cycle_t hpt_read(struct clocksource *cs)
{
return read_c0_count2();
}
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index f024057..f10a7cd 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -159,7 +159,7 @@
setup_irq(irq, &hub_rt_irqaction);
}
-static cycle_t hub_rt_read(void)
+static cycle_t hub_rt_read(struct clocksource *cs)
{
return REMOTE_HUB_L(cputonasid(0), PI_RT_COUNT);
}
diff --git a/arch/mn10300/include/asm/bug.h b/arch/mn10300/include/asm/bug.h
index 4fcf338..aa6a388 100644
--- a/arch/mn10300/include/asm/bug.h
+++ b/arch/mn10300/include/asm/bug.h
@@ -11,10 +11,12 @@
#ifndef _ASM_BUG_H
#define _ASM_BUG_H
+#ifdef CONFIG_BUG
+
/*
* Tell the user there is some problem.
*/
-#define _debug_bug_trap() \
+#define BUG() \
do { \
asm volatile( \
" syscall 15 \n" \
@@ -25,11 +27,11 @@
: \
: "i"(__FILE__), "i"(__LINE__) \
); \
-} while (0)
-
-#define BUG() _debug_bug_trap()
+} while (1)
#define HAVE_ARCH_BUG
+#endif /* CONFIG_BUG */
+
#include <asm-generic/bug.h>
#endif /* _ASM_BUG_H */
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index 543a4f9..fef5b43 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -344,6 +344,8 @@
#define __NR_dup3 331
#define __NR_pipe2 332
#define __NR_inotify_init1 333
+#define __NR_preadv 334
+#define __NR_pwritev 335
#ifdef __KERNEL__
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 34ab5a2..3dc3e46 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -723,6 +723,8 @@
.long sys_dup3
.long sys_pipe2
.long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev /* 335 */
nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
index 71414e1..79890ed 100644
--- a/arch/mn10300/kernel/setup.c
+++ b/arch/mn10300/kernel/setup.c
@@ -136,10 +136,6 @@
data_resource.start = virt_to_bus(&_etext);
data_resource.end = virt_to_bus(&_edata)-1;
-#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
-#define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
-#define PFN_PHYS(x) ((x) << PAGE_SHIFT)
-
start_pfn = (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT);
kstart_pfn = PFN_UP(__pa(&_text));
free_pfn = PFN_UP(__pa(&_end));
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 5b50e1a..4c78045 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -462,7 +462,7 @@
config PPC_256K_PAGES
bool "256k page size" if 44x
- depends on !STDBINUTILS && (!SHMEM || BROKEN)
+ depends on !STDBINUTILS
help
Make the page size 256k.
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index c63e356..d13cb11 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -293,4 +293,43 @@
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
+
+ localbus {
+ compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0xfe000000 0x02000000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ bank-width = <1>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x00200000>;
+ };
+ partition@200000 {
+ label = "rootfs";
+ reg = <0x00200000 0x01d00000>;
+ };
+ partition@1f00000 {
+ label = "u-boot";
+ reg = <0x01f00000 0x00060000>;
+ };
+ partition@1f60000 {
+ label = "u-boot-env";
+ reg = <0x01f60000 0x00020000>;
+ };
+ partition@1f80000 {
+ label = "dtb";
+ reg = <0x01f80000 0x00080000>;
+ };
+ };
+ };
+
};
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index 231bae7..b6f1fc6 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -84,9 +84,9 @@
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index 4356a1f..fa6a3d5 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -83,9 +83,9 @@
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 19aa723..00f7ed7 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -85,9 +85,9 @@
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
@@ -247,7 +247,7 @@
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
- phy-handle = <&phy3>;
+ phy-handle = <&phy4>;
mdio@520 {
#address-cells = <1>;
@@ -275,7 +275,7 @@
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
- phy-handle = <&phy4>;
+ phy-handle = <&phy5>;
mdio@520 {
#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 49145a0..673e4a7 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -85,9 +85,9 @@
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
@@ -247,7 +247,7 @@
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
- phy-handle = <&phy3>;
+ phy-handle = <&phy4>;
mdio@520 {
#address-cells = <1>;
@@ -275,7 +275,7 @@
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
- phy-handle = <&phy4>;
+ phy-handle = <&phy5>;
mdio@520 {
#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index 06d366e..6a99f1e 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -83,9 +83,9 @@
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index feff915..b6c2d71 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -85,9 +85,9 @@
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 1239c61..3838b77 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:47:44 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -94,19 +96,22 @@
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -115,10 +120,12 @@
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -126,6 +133,7 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -133,7 +141,6 @@
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -154,8 +161,6 @@
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -163,6 +168,7 @@
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
@@ -173,6 +179,8 @@
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -232,9 +240,12 @@
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -275,7 +286,6 @@
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -331,6 +341,7 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -343,7 +354,6 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -440,7 +450,6 @@
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -505,10 +514,12 @@
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -537,6 +548,8 @@
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -555,7 +568,6 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -657,7 +669,6 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -786,11 +797,11 @@
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -831,7 +842,6 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -846,6 +856,7 @@
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
@@ -853,6 +864,7 @@
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -863,6 +875,7 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -885,6 +898,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -941,6 +959,7 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -953,7 +972,6 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1024,6 +1042,7 @@
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1039,11 +1058,12 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1061,6 +1081,9 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1089,9 +1112,12 @@
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1099,17 +1125,19 @@
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1140,10 +1168,12 @@
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
@@ -1211,6 +1241,7 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index b7b8805..29b0f34 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:14 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:04 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
@@ -55,6 +56,7 @@
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -95,19 +97,22 @@
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -117,10 +122,12 @@
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -128,6 +135,7 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -140,7 +148,6 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -161,8 +168,6 @@
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -170,6 +175,7 @@
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
CONFIG_PPC_LITE5200=y
+# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
@@ -180,6 +186,8 @@
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -241,9 +249,12 @@
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +283,7 @@
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +306,6 @@
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -350,6 +361,7 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -362,7 +374,6 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -412,6 +423,7 @@
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
@@ -477,9 +489,11 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -502,6 +516,7 @@
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -578,6 +593,7 @@
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -611,6 +627,8 @@
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -632,6 +650,7 @@
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -642,10 +661,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -655,6 +674,7 @@
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -664,6 +684,7 @@
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -671,7 +692,6 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -795,7 +815,6 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -876,7 +895,7 @@
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -892,6 +911,7 @@
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -902,6 +922,7 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -924,6 +945,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -966,6 +992,7 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -978,7 +1005,6 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -994,6 +1020,7 @@
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1007,11 +1034,13 @@
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1029,6 +1058,9 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1057,9 +1089,12 @@
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1067,17 +1102,19 @@
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1108,10 +1145,12 @@
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1180,6 +1219,7 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index fb10f22..07b6b26 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:42:29 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:22 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -94,19 +96,22 @@
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -115,10 +120,12 @@
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -126,6 +133,7 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -133,7 +141,6 @@
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -154,8 +161,6 @@
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -163,6 +168,7 @@
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
@@ -173,6 +179,8 @@
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -233,9 +241,12 @@
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -276,7 +287,6 @@
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -332,6 +342,7 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -344,7 +355,6 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -441,7 +451,6 @@
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -466,6 +475,7 @@
CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
@@ -516,8 +526,10 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -528,6 +540,7 @@
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -556,6 +569,8 @@
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -574,7 +589,6 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -665,7 +679,6 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -696,6 +709,7 @@
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -710,11 +724,14 @@
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
@@ -800,7 +817,9 @@
#
# LED drivers
#
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@@ -810,6 +829,10 @@
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -866,8 +889,9 @@
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -878,6 +902,7 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -900,6 +925,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -956,6 +986,7 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -968,7 +999,6 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1039,6 +1069,7 @@
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1054,11 +1085,12 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1076,6 +1108,9 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1104,9 +1139,12 @@
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1114,17 +1152,19 @@
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1155,10 +1195,12 @@
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
@@ -1226,6 +1268,7 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 00944c0..afb1a3d 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:33 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:42 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -69,6 +71,7 @@
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
@@ -97,18 +100,18 @@
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -117,10 +120,12 @@
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -129,6 +134,7 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -141,7 +147,6 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -162,8 +167,6 @@
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -171,6 +174,7 @@
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
@@ -181,6 +185,8 @@
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -242,9 +248,12 @@
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -268,6 +277,7 @@
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -290,7 +300,6 @@
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -340,6 +349,7 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -352,7 +362,6 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -451,7 +460,6 @@
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -504,6 +512,7 @@
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -580,6 +589,7 @@
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -613,6 +623,8 @@
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -636,7 +648,6 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -702,6 +713,7 @@
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -767,7 +779,6 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -889,11 +900,11 @@
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -934,7 +945,6 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -949,6 +959,7 @@
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1007,8 +1018,9 @@
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1019,6 +1031,7 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1040,6 +1053,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1096,6 +1114,7 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1107,7 +1126,6 @@
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1162,6 +1180,7 @@
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1177,11 +1196,11 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1200,13 +1219,25 @@
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 65237ad..8585c7c 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:42:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:57 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -94,19 +96,22 @@
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -115,10 +120,12 @@
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -126,6 +133,7 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -138,7 +146,6 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -159,8 +166,6 @@
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -168,6 +173,7 @@
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
CONFIG_PPC_MPC5200_BUGFIX=y
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
@@ -178,6 +184,8 @@
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -238,9 +246,12 @@
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -281,7 +292,6 @@
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -337,6 +347,7 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -349,7 +360,6 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -447,7 +457,6 @@
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -514,8 +523,10 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -527,6 +538,7 @@
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -555,6 +567,8 @@
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -573,7 +587,6 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -675,7 +688,6 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -706,6 +718,7 @@
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -720,11 +733,14 @@
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
@@ -857,11 +873,11 @@
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -902,7 +918,6 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -917,6 +932,7 @@
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
@@ -976,8 +992,9 @@
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -988,6 +1005,7 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1010,6 +1028,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1066,6 +1089,7 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1078,7 +1102,6 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1149,6 +1172,7 @@
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1164,11 +1188,12 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1186,6 +1211,9 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1214,9 +1242,12 @@
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1224,17 +1255,19 @@
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1265,10 +1298,12 @@
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1337,6 +1372,7 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
deleted file mode 100644
index f6fa0b7..0000000
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ /dev/null
@@ -1,1802 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:07 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-CONFIG_MPC85xx_DS=y
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-CONFIG_FSL_ULI1575=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_FSL_DMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
deleted file mode 100644
index 186c101..0000000
--- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig
+++ /dev/null
@@ -1,1309 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:10 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-CONFIG_MPC85xx_MDS=y
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_QUICC_ENGINE=y
-# CONFIG_QE_GPIO is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_UCC_GETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_BOOKE_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-CONFIG_RTC_DRV_DS1374=y
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-# CONFIG_PPC_EARLY_DEBUG_44x is not set
-# CONFIG_PPC_EARLY_DEBUG_40x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
deleted file mode 100644
index 813223a..0000000
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ /dev/null
@@ -1,1794 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:12 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-CONFIG_MPC85xx_DS=y
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-CONFIG_FSL_ULI1575=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_IRQ_ALL_CPUS is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 0bc4597..43030fe 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:20 2009
+# Linux kernel version: 2.6.29-rc7
+# Mon Mar 16 09:03:28 2009
#
# CONFIG_PPC64 is not set
@@ -22,6 +22,7 @@
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
@@ -75,6 +76,15 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -152,11 +162,6 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -202,7 +207,7 @@
#
# Kernel options
#
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
@@ -244,6 +249,7 @@
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -259,6 +265,7 @@
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
@@ -284,10 +291,11 @@
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
@@ -363,12 +371,7 @@
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -471,27 +474,18 @@
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
+CONFIG_MTD_NAND_FSL_UPM=y
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
#
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
@@ -515,69 +509,21 @@
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
-CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDE is not set
#
# SCSI device support
@@ -650,7 +596,7 @@
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
-CONFIG_E1000=y
+# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
@@ -668,6 +614,7 @@
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -835,8 +782,6 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
@@ -975,26 +920,7 @@
# Special HID drivers
#
CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
+# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1064,16 +990,9 @@
#
# File systems
#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
@@ -1122,8 +1041,17 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_UBIFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1184,6 +1112,8 @@
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
@@ -1219,6 +1149,7 @@
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
@@ -1236,6 +1167,7 @@
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index af0cd55..aaa44166 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Feb 6 09:48:53 2009
+# Linux kernel version: 2.6.30-rc2
+# Mon Apr 20 11:06:25 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
@@ -39,6 +40,7 @@
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
@@ -55,6 +57,7 @@
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -91,19 +94,22 @@
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -113,10 +119,12 @@
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -124,6 +132,7 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -136,7 +145,6 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -157,8 +165,6 @@
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -166,8 +172,9 @@
CONFIG_PPC_MPC5200_SIMPLE=y
CONFIG_PPC_EFIKA=y
CONFIG_PPC_LITE5200=y
+CONFIG_PPC_MEDIA5200=y
CONFIG_PPC_MPC5200_BUGFIX=y
-# CONFIG_PPC_MPC5200_GPIO is not set
+CONFIG_PPC_MPC5200_GPIO=y
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
@@ -176,7 +183,9 @@
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
@@ -241,9 +250,12 @@
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +284,7 @@
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +307,6 @@
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -350,6 +362,7 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -362,7 +375,6 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -388,12 +400,9 @@
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
@@ -447,6 +456,8 @@
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -465,14 +476,23 @@
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
#
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -500,12 +520,14 @@
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
@@ -564,9 +586,11 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -589,6 +613,7 @@
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -666,6 +691,7 @@
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -699,6 +725,9 @@
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -722,7 +751,6 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -802,6 +830,7 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -854,6 +883,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
@@ -883,22 +913,63 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_MPC52xx_PSC=m
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@@ -915,10 +986,12 @@
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -929,11 +1002,16 @@
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -952,6 +1030,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
@@ -989,6 +1068,7 @@
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
@@ -1084,9 +1164,13 @@
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
@@ -1127,15 +1211,17 @@
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
# CONFIG_HID_APPLE is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
# CONFIG_HID_CHICONY is not set
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
@@ -1204,11 +1290,11 @@
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1250,7 +1336,6 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1265,6 +1350,8 @@
#
# OTG and related infrastructure
#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1317,6 +1404,13 @@
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
@@ -1336,8 +1430,9 @@
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1348,6 +1443,7 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1370,6 +1466,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1416,6 +1517,12 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1426,6 +1533,7 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1438,7 +1546,6 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1493,6 +1600,7 @@
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1500,7 +1608,7 @@
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
@@ -1508,11 +1616,14 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1530,6 +1641,9 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1558,9 +1672,12 @@
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1568,17 +1685,19 @@
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1609,10 +1728,12 @@
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1680,8 +1801,9 @@
#
# Compression
#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index fb08819..c162724 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:37 2009
+# Linux kernel version: 2.6.30-rc2
+# Tue Apr 21 15:40:23 2009
#
# CONFIG_PPC64 is not set
@@ -22,6 +22,7 @@
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
@@ -59,6 +60,7 @@
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -73,11 +75,21 @@
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -93,22 +105,24 @@
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -118,10 +132,12 @@
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -130,6 +146,7 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -142,7 +159,6 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -158,11 +174,6 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -178,8 +189,9 @@
CONFIG_MPC85xx_MDS=y
CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y
+CONFIG_SOCRATES=y
CONFIG_KSI8560=y
-# CONFIG_STX_GP3 is not set
+CONFIG_STX_GP3=y
CONFIG_TQM8540=y
CONFIG_TQM8541=y
CONFIG_TQM8548=y
@@ -200,11 +212,11 @@
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_QUICC_ENGINE=y
-# CONFIG_QE_GPIO is not set
+CONFIG_QE_GPIO=y
CONFIG_CPM2=y
CONFIG_FSL_ULI1575=y
CONFIG_CPM=y
-# CONFIG_MPC8xxx_GPIO is not set
+CONFIG_MPC8xxx_GPIO=y
# CONFIG_SIMPLE_GPIO is not set
#
@@ -249,9 +261,12 @@
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -278,6 +293,7 @@
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -291,17 +307,17 @@
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -389,6 +405,7 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -401,7 +418,6 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
@@ -456,13 +472,20 @@
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -521,9 +544,11 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -546,6 +571,7 @@
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -622,6 +648,7 @@
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -634,11 +661,11 @@
#
# MII PHY device drivers
#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
+CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
@@ -647,7 +674,7 @@
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
@@ -655,6 +682,8 @@
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -667,7 +696,10 @@
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_ATL2 is not set
-# CONFIG_FS_ENET is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+CONFIG_FS_ENET_HAS_FCC=y
+# CONFIG_FS_ENET_MDIO_FCC is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
@@ -675,6 +707,7 @@
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -685,11 +718,15 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_UCC_GETH is not set
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -699,6 +736,7 @@
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -708,6 +746,7 @@
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -715,7 +754,6 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -813,14 +851,15 @@
# CONFIG_SERIAL_CPM is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
+CONFIG_SERIAL_QE=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -857,7 +896,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
-# CONFIG_I2C_CPM is not set
+CONFIG_I2C_CPM=m
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
@@ -885,12 +924,9 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -969,7 +1005,7 @@
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
@@ -978,6 +1014,7 @@
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
@@ -1017,103 +1054,7 @@
#
# Supported DVB Frontends
#
-
-#
-# Customise DVB Frontends
-#
# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -1193,6 +1134,8 @@
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
@@ -1247,15 +1190,17 @@
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1314,6 +1259,7 @@
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
@@ -1329,11 +1275,11 @@
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1375,7 +1321,6 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1392,6 +1337,7 @@
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1406,6 +1352,8 @@
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
+# CONFIG_EDAC_AMD8131 is not set
+# CONFIG_EDAC_AMD8111 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1460,7 +1408,7 @@
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_DMADEVICES=y
#
@@ -1473,7 +1421,9 @@
# DMA Clients
#
# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1484,6 +1434,7 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1508,6 +1459,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1562,6 +1518,7 @@
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1577,7 +1534,6 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1648,6 +1604,10 @@
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+CONFIG_UCC_SLOW=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1662,11 +1622,12 @@
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1684,6 +1645,9 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1714,9 +1678,12 @@
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1724,17 +1691,20 @@
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1759,18 +1729,21 @@
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
@@ -1837,6 +1810,7 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@@ -1845,7 +1819,7 @@
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
similarity index 90%
rename from arch/powerpc/configs/85xx/mpc8536_ds_defconfig
rename to arch/powerpc/configs/mpc85xx_smp_defconfig
index e31b6a4..1aa1c50 100644
--- a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:04 2009
+# Linux kernel version: 2.6.30-rc2
+# Tue Apr 21 15:41:18 2009
#
# CONFIG_PPC64 is not set
@@ -22,8 +22,10 @@
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -43,6 +45,7 @@
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
@@ -52,19 +55,20 @@
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
@@ -72,11 +76,21 @@
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -92,22 +106,24 @@
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -117,10 +133,12 @@
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -128,6 +146,9 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -138,9 +159,9 @@
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -156,11 +177,6 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -170,25 +186,27 @@
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
+CONFIG_MPC8540_ADS=y
+CONFIG_MPC8560_ADS=y
+CONFIG_MPC85xx_CDS=y
+CONFIG_MPC85xx_MDS=y
CONFIG_MPC8536_DS=y
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
+CONFIG_MPC85xx_DS=y
+CONFIG_SOCRATES=y
+CONFIG_KSI8560=y
+CONFIG_STX_GP3=y
+CONFIG_TQM8540=y
+CONFIG_TQM8541=y
+CONFIG_TQM8548=y
+CONFIG_TQM8555=y
+CONFIG_TQM8560=y
+CONFIG_SBC8548=y
# CONFIG_SBC8560 is not set
+CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_I8259=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
@@ -196,10 +214,12 @@
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
+CONFIG_QUICC_ENGINE=y
+CONFIG_QE_GPIO=y
+CONFIG_CPM2=y
+CONFIG_FSL_ULI1575=y
+CONFIG_CPM=y
+CONFIG_MPC8xxx_GPIO=y
# CONFIG_SIMPLE_GPIO is not set
#
@@ -228,6 +248,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_IRQ_ALL_CPUS is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -244,9 +265,12 @@
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -259,6 +283,7 @@
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
@@ -272,6 +297,7 @@
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -285,17 +311,17 @@
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -383,6 +409,7 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -395,7 +422,6 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
@@ -426,6 +452,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
@@ -442,20 +469,27 @@
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=524288
+CONFIG_BLK_DEV_RAM_SIZE=131072
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -514,9 +548,11 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -539,11 +575,12 @@
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-CONFIG_SATA_SIL24=y
+CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
CONFIG_SATA_FSL=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
@@ -554,13 +591,13 @@
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
-CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
+CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
@@ -615,6 +652,7 @@
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -627,11 +665,11 @@
#
# MII PHY device drivers
#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
+CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
@@ -640,7 +678,7 @@
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
@@ -648,6 +686,8 @@
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -660,6 +700,10 @@
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_ATL2 is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+CONFIG_FS_ENET_HAS_FCC=y
+# CONFIG_FS_ENET_MDIO_FCC is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
@@ -667,22 +711,26 @@
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
-CONFIG_SKGE=y
-# CONFIG_SKGE_DEBUG is not set
-CONFIG_SKY2=y
-# CONFIG_SKY2_DEBUG is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -692,6 +740,7 @@
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -701,6 +750,7 @@
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -708,7 +758,6 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -803,8 +852,10 @@
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_CPM is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_QE=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -812,7 +863,8 @@
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -848,6 +900,8 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+CONFIG_I2C_CPM=m
+# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
@@ -874,12 +928,9 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -888,11 +939,36 @@
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -907,6 +983,8 @@
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
@@ -931,7 +1009,7 @@
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
@@ -940,6 +1018,7 @@
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
@@ -979,103 +1058,7 @@
#
# Supported DVB Frontends
#
-
-#
-# Customise DVB Frontends
-#
# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -1101,16 +1084,18 @@
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
@@ -1153,6 +1138,8 @@
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
@@ -1207,15 +1194,17 @@
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1274,10 +1263,12 @@
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
@@ -1288,11 +1279,11 @@
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1334,7 +1325,6 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1350,13 +1340,24 @@
#
# OTG and related infrastructure
#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
+# CONFIG_EDAC_AMD8131 is not set
+# CONFIG_EDAC_AMD8111 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1411,7 +1412,7 @@
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_DMADEVICES=y
#
@@ -1424,7 +1425,9 @@
# DMA Clients
#
# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1435,6 +1438,7 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1459,6 +1463,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1513,6 +1522,7 @@
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1528,7 +1538,6 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1599,6 +1608,10 @@
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+CONFIG_UCC_SLOW=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1613,11 +1626,12 @@
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1635,6 +1649,9 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1665,9 +1682,12 @@
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1675,23 +1695,26 @@
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
+CONFIG_VIRQ_DEBUG=y
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1717,10 +1740,12 @@
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
@@ -1789,6 +1814,7 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@@ -1798,5 +1824,6 @@
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index 1a856b1..087c22f 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -258,7 +258,8 @@
# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
(exec_stk != EXSTACK_DISABLE_X) : 0)
#else
-# define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+# define SET_PERSONALITY(ex) \
+ set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
#endif /* __powerpc64__ */
extern int dcache_bsize;
diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
index 6d406c5..9696cc3 100644
--- a/arch/powerpc/include/asm/futex.h
+++ b/arch/powerpc/include/asm/futex.h
@@ -27,7 +27,7 @@
PPC_LONG "1b,4b,2b,4b\n" \
".previous" \
: "=&r" (oldval), "=&r" (ret) \
- : "b" (uaddr), "i" (-EFAULT), "1" (oparg) \
+ : "b" (uaddr), "i" (-EFAULT), "r" (oparg) \
: "cr0", "memory")
static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
@@ -47,19 +47,19 @@
switch (op) {
case FUTEX_OP_SET:
- __futex_atomic_op("", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("mr %1,%4\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ADD:
- __futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("add %1,%0,%4\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_OR:
- __futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("or %1,%0,%4\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ANDN:
- __futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("andc %1,%0,%4\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_XOR:
- __futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("xor %1,%0,%4\n", ret, oldval, uaddr, oparg);
break;
default:
ret = -ENOSYS;
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index cbf1543..86d2366 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -52,6 +52,12 @@
*/
#define MMU_FTR_NEED_DTLB_SW_LRU ASM_CONST(0x00200000)
+/* This indicates that the processor uses the wrong opcode for tlbilx
+ * instructions. During the ISA 2.06 development the opcode for tlbilx
+ * changed and some early implementations used to old opcode
+ */
+#define MMU_FTR_TLBILX_EARLY_OPCODE ASM_CONST(0x00400000)
+
#ifndef __ASSEMBLY__
#include <asm/cputable.h>
diff --git a/arch/powerpc/include/asm/parport.h b/arch/powerpc/include/asm/parport.h
index 414c50e2..94942d6 100644
--- a/arch/powerpc/include/asm/parport.h
+++ b/arch/powerpc/include/asm/parport.h
@@ -29,7 +29,7 @@
prop = of_get_property(np, "interrupts", NULL);
if (!prop)
continue;
- if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL) != NULL)
+ if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL, 0) != NULL)
count++;
}
return count;
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index f4a4db8..ef4da37 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -43,7 +43,8 @@
#define PPC_INST_STSWI 0x7c0005aa
#define PPC_INST_STSWX 0x7c00052a
-#define PPC_INST_TLBILX 0x7c000626
+#define PPC_INST_TLBILX 0x7c000024
+#define PPC_INST_TLBILX_EARLY 0x7c000626
#define PPC_INST_WAIT 0x7c00007c
/* macros to insert fields into opcodes */
@@ -63,10 +64,18 @@
#define PPC_RFDI stringify_in_c(.long PPC_INST_RFDI)
#define PPC_RFMCI stringify_in_c(.long PPC_INST_RFMCI)
#define PPC_TLBILX(t, a, b) stringify_in_c(.long PPC_INST_TLBILX | \
- __PPC_T_TLB(t) | __PPC_RA(a) | __PPC_RB(b))
+ __PPC_T_TLB(t) | \
+ __PPC_RA(a) | __PPC_RB(b))
#define PPC_TLBILX_ALL(a, b) PPC_TLBILX(0, a, b)
#define PPC_TLBILX_PID(a, b) PPC_TLBILX(1, a, b)
#define PPC_TLBILX_VA(a, b) PPC_TLBILX(3, a, b)
+
+#define PPC_TLBILX_EARLY(t, a, b) stringify_in_c(.long PPC_INST_TLBILX_EARLY | \
+ __PPC_T_TLB(t) | \
+ __PPC_RA(a) | __PPC_RB(b))
+#define PPC_TLBILX_ALL_EARLY(a, b) PPC_TLBILX_EARLY(0, a, b)
+#define PPC_TLBILX_PID_EARLY(a, b) PPC_TLBILX_EARLY(1, a, b)
+#define PPC_TLBILX_VA_EARLY(a, b) PPC_TLBILX_EARLY(3, a, b)
#define PPC_WAIT(w) stringify_in_c(.long PPC_INST_WAIT | \
__PPC_WC(w))
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index cd1b687..57db50f 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1766,7 +1766,7 @@
.cpu_features = CPU_FTRS_E500MC,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
.mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS |
- MMU_FTR_USE_TLBILX,
+ MMU_FTR_USE_TLBILX | MMU_FTR_TLBILX_EARLY_OPCODE,
.icache_bsize = 64,
.dcache_bsize = 64,
.num_pmcs = 4,
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 8f0856f3..8362620 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -971,7 +971,7 @@
struct device_node *p;
const u32 *intspec, *tmp, *addr;
u32 intsize, intlen;
- int res;
+ int res = -EINVAL;
DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index);
@@ -995,21 +995,20 @@
/* Get size of interrupt specifier */
tmp = of_get_property(p, "#interrupt-cells", NULL);
- if (tmp == NULL) {
- of_node_put(p);
- return -EINVAL;
- }
+ if (tmp == NULL)
+ goto out;
intsize = *tmp;
DBG(" intsize=%d intlen=%d\n", intsize, intlen);
/* Check index */
if ((index + 1) * intsize > intlen)
- return -EINVAL;
+ goto out;
/* Get new specifier and map it */
res = of_irq_map_raw(p, intspec + index * intsize, intsize,
addr, out_irq);
+out:
of_node_put(p);
return res;
}
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 926ea86..48571ac 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -77,7 +77,7 @@
#include <linux/clockchips.h>
#include <linux/clocksource.h>
-static cycle_t rtc_read(void);
+static cycle_t rtc_read(struct clocksource *);
static struct clocksource clocksource_rtc = {
.name = "rtc",
.rating = 400,
@@ -88,7 +88,7 @@
.read = rtc_read,
};
-static cycle_t timebase_read(void);
+static cycle_t timebase_read(struct clocksource *);
static struct clocksource clocksource_timebase = {
.name = "timebase",
.rating = 400,
@@ -766,12 +766,12 @@
}
/* clocksource code */
-static cycle_t rtc_read(void)
+static cycle_t rtc_read(struct clocksource *cs)
{
return (cycle_t)get_rtc();
}
-static cycle_t timebase_read(void)
+static cycle_t timebase_read(struct clocksource *cs)
{
return (cycle_t)get_tb();
}
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index db556d2..1ade7eb 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -753,7 +753,7 @@
}
#ifdef CONFIG_SMP
-void __init early_init_mmu_secondary(void)
+void __cpuinit early_init_mmu_secondary(void)
{
/* Initialize hash table for that CPU */
if (!firmware_has_feature(FW_FEATURE_LPAR))
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 7af7297..ad2eb4d 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -125,7 +125,6 @@
void flush_tlb_mm(struct mm_struct *mm)
{
- cpumask_t cpu_mask;
unsigned int pid;
preempt_disable();
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 788b87c..45fed36 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -138,7 +138,11 @@
andi. r3,r3,MMUCSR0_TLBFI@l
bne 1b
MMU_FTR_SECTION_ELSE
- PPC_TLBILX_ALL(0,0)
+ BEGIN_MMU_FTR_SECTION_NESTED(96)
+ PPC_TLBILX_ALL(0,r3)
+ MMU_FTR_SECTION_ELSE_NESTED(96)
+ PPC_TLBILX_ALL_EARLY(0,r3)
+ ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
msync
isync
@@ -151,7 +155,11 @@
wrteei 0
mfspr r4,SPRN_MAS6 /* save MAS6 */
mtspr SPRN_MAS6,r3
+ BEGIN_MMU_FTR_SECTION_NESTED(96)
PPC_TLBILX_PID(0,0)
+ MMU_FTR_SECTION_ELSE_NESTED(96)
+ PPC_TLBILX_PID_EARLY(0,0)
+ ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
mtspr SPRN_MAS6,r4 /* restore MAS6 */
wrtee r10
MMU_FTR_SECTION_ELSE
@@ -185,7 +193,11 @@
mtspr SPRN_MAS1,r4
tlbwe
MMU_FTR_SECTION_ELSE
+ BEGIN_MMU_FTR_SECTION_NESTED(96)
PPC_TLBILX_VA(0,r3)
+ MMU_FTR_SECTION_ELSE_NESTED(96)
+ PPC_TLBILX_VA_EARLY(0,r3)
+ ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
msync
isync
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index 1db6b9e..65a35f3 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -275,11 +275,6 @@
if (!machine_is(mpc86xx_hpcd))
return;
- /* Interrupt Disable, Needed when SATA disabled */
- pci_read_config_word(dev, PCI_COMMAND, &temp);
- temp |= 1<<10;
- pci_write_config_word(dev, PCI_COMMAND, temp);
-
pci_read_config_byte(dev, 0x83, &c);
c |= 0x80;
pci_write_config_byte(dev, 0x83, c);
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index c64fb5b..153051e 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -44,10 +44,6 @@
#include "pasemi.h"
-#if !defined(CONFIG_SMP)
-static void smp_send_stop(void) {}
-#endif
-
/* SDC reset register, must be pre-mapped at reset time */
static void __iomem *reset_reg;
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index 86e392b1..cf1cd0f 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -578,7 +578,7 @@
*
*/
-static void update_flash_db(void)
+static void __maybe_unused update_flash_db(void)
{
int result;
int file;
diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index fafcaa0..ab69925 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -25,6 +25,7 @@
#include <asm/smp.h>
#include <asm/system.h>
#include <asm/uaccess.h>
+#include <asm/firmware.h>
#include "plpar_wrappers.h"
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 380420f..9a2a6e3 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -182,6 +182,8 @@
if (!driver)
return;
+ dev->error_state = pci_channel_io_normal;
+
eeh_enable_irq(dev);
if (!driver->err_handler ||
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index a0fa4eb..abdb124 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -18,6 +18,7 @@
#include <linux/types.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
+#include <linux/device.h>
#include <linux/rio.h>
#include <linux/rio_drv.h>
#include <linux/of_platform.h>
@@ -159,6 +160,7 @@
};
struct rio_priv {
+ struct device *dev;
void __iomem *regs_win;
struct rio_atmu_regs __iomem *atmu_regs;
struct rio_atmu_regs __iomem *maint_atmu_regs;
@@ -484,13 +486,13 @@
for (i = 0; i < priv->msg_tx_ring.size; i++) {
priv->msg_tx_ring.virt_buffer[i] =
- dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
&priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
if (!priv->msg_tx_ring.virt_buffer[i]) {
rc = -ENOMEM;
for (j = 0; j < priv->msg_tx_ring.size; j++)
if (priv->msg_tx_ring.virt_buffer[j])
- dma_free_coherent(NULL,
+ dma_free_coherent(priv->dev,
RIO_MSG_BUFFER_SIZE,
priv->msg_tx_ring.
virt_buffer[j],
@@ -501,7 +503,7 @@
}
/* Initialize outbound message descriptor ring */
- priv->msg_tx_ring.virt = dma_alloc_coherent(NULL,
+ priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
&priv->msg_tx_ring.phys, GFP_KERNEL);
if (!priv->msg_tx_ring.virt) {
@@ -549,12 +551,13 @@
return rc;
out_irq:
- dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ dma_free_coherent(priv->dev,
+ priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
out_dma:
for (i = 0; i < priv->msg_tx_ring.size; i++)
- dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
priv->msg_tx_ring.virt_buffer[i],
priv->msg_tx_ring.phys_buffer[i]);
@@ -576,7 +579,8 @@
out_be32(&priv->msg_regs->omr, 0);
/* Free ring */
- dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ dma_free_coherent(priv->dev,
+ priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
/* Free interrupt */
@@ -654,7 +658,7 @@
priv->msg_rx_ring.virt_buffer[i] = NULL;
/* Initialize inbound message ring */
- priv->msg_rx_ring.virt = dma_alloc_coherent(NULL,
+ priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
&priv->msg_rx_ring.phys, GFP_KERNEL);
if (!priv->msg_rx_ring.virt) {
@@ -673,7 +677,7 @@
rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
"msg_rx", (void *)mport);
if (rc < 0) {
- dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
priv->msg_tx_ring.virt_buffer[i],
priv->msg_tx_ring.phys_buffer[i]);
goto out;
@@ -713,7 +717,7 @@
out_be32(&priv->msg_regs->imr, 0);
/* Free ring */
- dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
/* Free interrupt */
@@ -890,7 +894,7 @@
}
/* Initialize inbound doorbells */
- priv->dbell_ring.virt = dma_alloc_coherent(NULL, 512 *
+ priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 *
DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL);
if (!priv->dbell_ring.virt) {
printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
@@ -911,7 +915,7 @@
"dbell_rx", (void *)mport);
if (rc < 0) {
iounmap(priv->dbell_win);
- dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
+ dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE,
priv->dbell_ring.virt, priv->dbell_ring.phys);
printk(KERN_ERR
"MPC85xx RIO: unable to request inbound doorbell irq");
@@ -1087,6 +1091,8 @@
rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
strcpy(port->name, "RIO0 mport");
+ priv->dev = &dev->dev;
+
port->ops = ops;
port->host_deviceid = fsl_rio_get_hdid(port->id);
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 27b70d8..aeb3cff 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -176,7 +176,7 @@
struct vtimer_list *timer;
u64 expires;
} *args = p;
- mod_virt_timer(args->timer, args->expires);
+ mod_virt_timer_periodic(args->timer, args->expires);
}
#define APPLDATA_ADD_TIMER 0
diff --git a/arch/s390/include/asm/cpuid.h b/arch/s390/include/asm/cpuid.h
new file mode 100644
index 0000000..07836a2
--- /dev/null
+++ b/arch/s390/include/asm/cpuid.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright IBM Corp. 2000,2009
+ * Author(s): Hartmut Penner <hp@de.ibm.com>,
+ * Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Christian Ehrhardt <ehrhardt@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_CPUID_H_
+#define _ASM_S390_CPUID_H_
+
+/*
+ * CPU type and hardware bug flags. Kept separately for each CPU.
+ * Members of this structure are referenced in head.S, so think twice
+ * before touching them. [mj]
+ */
+
+typedef struct
+{
+ unsigned int version : 8;
+ unsigned int ident : 24;
+ unsigned int machine : 16;
+ unsigned int unused : 16;
+} __attribute__ ((packed)) cpuid_t;
+
+#endif /* _ASM_S390_CPUID_H_ */
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index c6e674f..54ea39f 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -15,6 +15,7 @@
#define ASM_KVM_HOST_H
#include <linux/kvm_host.h>
#include <asm/debug.h>
+#include <asm/cpuid.h>
#define KVM_MAX_VCPUS 64
#define KVM_MEMORY_SLOTS 32
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index b349f1c..3aeca49 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -66,6 +66,7 @@
#define __LC_USER_EXEC_ASCE 0x02ac
#define __LC_CPUID 0x02b0
#define __LC_INT_CLOCK 0x02c8
+#define __LC_MACHINE_FLAGS 0x02d8
#define __LC_IRB 0x0300
#define __LC_PFAULT_INTPARM 0x0080
#define __LC_CPU_TIMER_SAVE_AREA 0x00d8
@@ -110,6 +111,7 @@
#define __LC_CPUID 0x0320
#define __LC_INT_CLOCK 0x0340
#define __LC_VDSO_PER_CPU 0x0350
+#define __LC_MACHINE_FLAGS 0x0358
#define __LC_IRB 0x0380
#define __LC_PASTE 0x03c0
#define __LC_PFAULT_INTPARM 0x11b8
@@ -127,9 +129,9 @@
#ifndef __ASSEMBLY__
-#include <asm/processor.h>
+#include <asm/cpuid.h>
+#include <asm/ptrace.h>
#include <linux/types.h>
-#include <asm/sigp.h>
void restart_int_handler(void);
void ext_int_handler(void);
@@ -277,7 +279,8 @@
__u32 ext_call_fast; /* 0x02c4 */
__u64 int_clock; /* 0x02c8 */
__u64 clock_comparator; /* 0x02d0 */
- __u8 pad_0x02d8[0x0300-0x02d8]; /* 0x02d8 */
+ __u32 machine_flags; /* 0x02d8 */
+ __u8 pad_0x02dc[0x0300-0x02dc]; /* 0x02dc */
/* Interrupt response block */
__u8 irb[64]; /* 0x0300 */
@@ -381,7 +384,8 @@
__u64 int_clock; /* 0x0340 */
__u64 clock_comparator; /* 0x0348 */
__u64 vdso_per_cpu_data; /* 0x0350 */
- __u8 pad_0x0358[0x0380-0x0358]; /* 0x0358 */
+ __u64 machine_flags; /* 0x0358 */
+ __u8 pad_0x0360[0x0380-0x0360]; /* 0x0360 */
/* Interrupt response block. */
__u8 irb[64]; /* 0x0380 */
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index 61862b3..c139fa7 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -14,7 +14,10 @@
#define __ASM_S390_PROCESSOR_H
#include <linux/linkage.h>
+#include <asm/cpuid.h>
+#include <asm/page.h>
#include <asm/ptrace.h>
+#include <asm/setup.h>
#ifdef __KERNEL__
/*
@@ -23,20 +26,6 @@
*/
#define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; })
-/*
- * CPU type and hardware bug flags. Kept separately for each CPU.
- * Members of this structure are referenced in head.S, so think twice
- * before touching them. [mj]
- */
-
-typedef struct
-{
- unsigned int version : 8;
- unsigned int ident : 24;
- unsigned int machine : 16;
- unsigned int unused : 16;
-} __attribute__ ((packed)) cpuid_t;
-
static inline void get_cpu_id(cpuid_t *ptr)
{
asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr));
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index f1b0516..539263f 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -313,8 +313,6 @@
#ifdef __KERNEL__
-#include <asm/setup.h>
-#include <asm/page.h>
/*
* The pt_regs struct defines the way the registers are stored on
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index e8bd6ac..38b0fc2 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -14,6 +14,7 @@
#ifdef __KERNEL__
+#include <asm/lowcore.h>
#include <asm/types.h>
#define PARMAREA 0x10400
@@ -63,7 +64,6 @@
/*
* Machine features detected in head.S
*/
-extern unsigned long machine_flags;
#define MACHINE_FLAG_VM (1UL << 0)
#define MACHINE_FLAG_IEEE (1UL << 1)
@@ -77,28 +77,28 @@
#define MACHINE_FLAG_HPAGE (1UL << 10)
#define MACHINE_FLAG_PFMF (1UL << 11)
-#define MACHINE_IS_VM (machine_flags & MACHINE_FLAG_VM)
-#define MACHINE_IS_KVM (machine_flags & MACHINE_FLAG_KVM)
-#define MACHINE_HAS_DIAG9C (machine_flags & MACHINE_FLAG_DIAG9C)
+#define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM)
+#define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM)
+#define MACHINE_HAS_DIAG9C (S390_lowcore.machine_flags & MACHINE_FLAG_DIAG9C)
#ifndef __s390x__
-#define MACHINE_HAS_IEEE (machine_flags & MACHINE_FLAG_IEEE)
-#define MACHINE_HAS_CSP (machine_flags & MACHINE_FLAG_CSP)
+#define MACHINE_HAS_IEEE (S390_lowcore.machine_flags & MACHINE_FLAG_IEEE)
+#define MACHINE_HAS_CSP (S390_lowcore.machine_flags & MACHINE_FLAG_CSP)
#define MACHINE_HAS_IDTE (0)
#define MACHINE_HAS_DIAG44 (1)
-#define MACHINE_HAS_MVPG (machine_flags & MACHINE_FLAG_MVPG)
+#define MACHINE_HAS_MVPG (S390_lowcore.machine_flags & MACHINE_FLAG_MVPG)
#define MACHINE_HAS_MVCOS (0)
#define MACHINE_HAS_HPAGE (0)
#define MACHINE_HAS_PFMF (0)
#else /* __s390x__ */
#define MACHINE_HAS_IEEE (1)
#define MACHINE_HAS_CSP (1)
-#define MACHINE_HAS_IDTE (machine_flags & MACHINE_FLAG_IDTE)
-#define MACHINE_HAS_DIAG44 (machine_flags & MACHINE_FLAG_DIAG44)
+#define MACHINE_HAS_IDTE (S390_lowcore.machine_flags & MACHINE_FLAG_IDTE)
+#define MACHINE_HAS_DIAG44 (S390_lowcore.machine_flags & MACHINE_FLAG_DIAG44)
#define MACHINE_HAS_MVPG (1)
-#define MACHINE_HAS_MVCOS (machine_flags & MACHINE_FLAG_MVCOS)
-#define MACHINE_HAS_HPAGE (machine_flags & MACHINE_FLAG_HPAGE)
-#define MACHINE_HAS_PFMF (machine_flags & MACHINE_FLAG_PFMF)
+#define MACHINE_HAS_MVCOS (S390_lowcore.machine_flags & MACHINE_FLAG_MVCOS)
+#define MACHINE_HAS_HPAGE (S390_lowcore.machine_flags & MACHINE_FLAG_HPAGE)
+#define MACHINE_HAS_PFMF (S390_lowcore.machine_flags & MACHINE_FLAG_PFMF)
#endif /* __s390x__ */
#define ZFCPDUMP_HSA_SIZE (32UL<<20)
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index c544aa5..461f2abd 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -31,8 +31,9 @@
#define ASYNC_SIZE (PAGE_SIZE << ASYNC_ORDER)
#ifndef __ASSEMBLY__
-#include <asm/processor.h>
#include <asm/lowcore.h>
+#include <asm/page.h>
+#include <asm/processor.h>
/*
* low level task data that entry.S needs immediate access to
diff --git a/arch/s390/include/asm/timer.h b/arch/s390/include/asm/timer.h
index e4bcab7..814243c 100644
--- a/arch/s390/include/asm/timer.h
+++ b/arch/s390/include/asm/timer.h
@@ -41,6 +41,7 @@
extern void add_virt_timer(void *new);
extern void add_virt_timer_periodic(void *new);
extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires);
+extern int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires);
extern int del_virt_timer(struct vtimer_list *timer);
extern void init_cpu_vtimer(void);
diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index d744c3d..cc21e3e 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -11,6 +11,9 @@
#ifndef _ASM_S390_TIMEX_H
#define _ASM_S390_TIMEX_H
+/* The value of the TOD clock for 1.1.1970. */
+#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL
+
/* Inline functions for clock register access. */
static inline int set_clock(__u64 time)
{
@@ -85,4 +88,6 @@
void init_cpu_timer(void);
unsigned long long monotonic_clock(void);
+extern u64 sched_clock_base_cc;
+
#endif
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
index c8ad350..f0f19e6 100644
--- a/arch/s390/include/asm/unistd.h
+++ b/arch/s390/include/asm/unistd.h
@@ -265,7 +265,9 @@
#define __NR_pipe2 325
#define __NR_dup3 326
#define __NR_epoll_create1 327
-#define NR_syscalls 328
+#define __NR_preadv 328
+#define __NR_pwritev 329
+#define NR_syscalls 330
/*
* There are some system calls that are not present on 64 bit, some
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 67a6001..fa9905c 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -27,6 +27,8 @@
DEFINE(__TI_flags, offsetof(struct thread_info, flags));
DEFINE(__TI_cpu, offsetof(struct thread_info, cpu));
DEFINE(__TI_precount, offsetof(struct thread_info, preempt_count));
+ DEFINE(__TI_user_timer, offsetof(struct thread_info, user_timer));
+ DEFINE(__TI_system_timer, offsetof(struct thread_info, system_timer));
BLANK();
DEFINE(__PT_ARGS, offsetof(struct pt_regs, args));
DEFINE(__PT_PSW, offsetof(struct pt_regs, psw));
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 6cc87d8..002c70d 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -702,20 +702,12 @@
struct stat64_emu31 __user* statbuf, int flag)
{
struct kstat stat;
- int error = -EINVAL;
+ int error;
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_stat64(statbuf, &stat);
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_stat64(statbuf, &stat);
}
/*
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 87cf5a7..fb38af6 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1805,3 +1805,21 @@
llgfr %r5,%r5 # u32
llgfr %r6,%r6 # u32
jg compat_sys_keyctl # branch to system call
+
+ .globl compat_sys_preadv_wrapper
+compat_sys_preadv_wrapper:
+ llgfr %r2,%r2 # unsigned long
+ llgtr %r3,%r3 # compat_iovec *
+ llgfr %r4,%r4 # unsigned long
+ llgfr %r5,%r5 # u32
+ llgfr %r6,%r6 # u32
+ jg compat_sys_preadv # branch to system call
+
+ .globl compat_sys_pwritev_wrapper
+compat_sys_pwritev_wrapper:
+ llgfr %r2,%r2 # unsigned long
+ llgtr %r3,%r3 # compat_iovec *
+ llgfr %r4,%r4 # unsigned long
+ llgfr %r5,%r5 # u32
+ llgfr %r6,%r6 # u32
+ jg compat_sys_pwritev # branch to system call
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 4d221c8..cf09948 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -34,8 +34,25 @@
char kernel_nss_name[NSS_NAME_SIZE + 1];
+static unsigned long machine_flags;
+
static void __init setup_boot_command_line(void);
+/*
+ * Get the TOD clock running.
+ */
+static void __init reset_tod_clock(void)
+{
+ u64 time;
+
+ if (store_clock(&time) == 0)
+ return;
+ /* TOD clock not running. Set the clock to Unix Epoch. */
+ if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0)
+ disabled_wait(0);
+
+ sched_clock_base_cc = TOD_UNIX_EPOCH;
+}
#ifdef CONFIG_SHARED_KERNEL
int __init savesys_ipl_nss(char *cmd, const int cmdlen);
@@ -370,6 +387,7 @@
*/
void __init startup_init(void)
{
+ reset_tod_clock();
ipl_save_parameters();
rescue_initrd();
clear_bss_section();
@@ -391,5 +409,6 @@
setup_hpage();
sclp_facilities_detect();
detect_memory_layout(memory_chunk);
+ S390_lowcore.machine_flags = machine_flags;
lockdep_on();
}
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 1268aa2..f3e2759 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -837,16 +837,29 @@
__CPUINIT
.globl restart_int_handler
restart_int_handler:
+ basr %r1,0
+restart_base:
+ spt restart_vtime-restart_base(%r1)
+ stck __LC_LAST_UPDATE_CLOCK
+ mvc __LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1)
+ mvc __LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1)
l %r15,__LC_SAVE_AREA+60 # load ksp
lctl %c0,%c15,__LC_CREGS_SAVE_AREA # get new ctl regs
lam %a0,%a15,__LC_AREGS_SAVE_AREA
lm %r6,%r15,__SF_GPRS(%r15) # load registers from clone
+ l %r1,__LC_THREAD_INFO
+ mvc __LC_USER_TIMER(8),__TI_user_timer(%r1)
+ mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1)
+ xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER
stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on
basr %r14,0
l %r14,restart_addr-.(%r14)
br %r14 # branch to start_secondary
restart_addr:
.long start_secondary
+ .align 8
+restart_vtime:
+ .long 0x7fffffff,0xffffffff
.previous
#else
/*
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index c6fbde1..84a1058 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -831,14 +831,27 @@
__CPUINIT
.globl restart_int_handler
restart_int_handler:
+ basr %r1,0
+restart_base:
+ spt restart_vtime-restart_base(%r1)
+ stck __LC_LAST_UPDATE_CLOCK
+ mvc __LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1)
+ mvc __LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1)
lg %r15,__LC_SAVE_AREA+120 # load ksp
lghi %r10,__LC_CREGS_SAVE_AREA
lctlg %c0,%c15,0(%r10) # get new ctl regs
lghi %r10,__LC_AREGS_SAVE_AREA
lam %a0,%a15,0(%r10)
lmg %r6,%r15,__SF_GPRS(%r15) # load registers from clone
+ lg %r1,__LC_THREAD_INFO
+ mvc __LC_USER_TIMER(8),__TI_user_timer(%r1)
+ mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1)
+ xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER
stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on
jg start_secondary
+ .align 8
+restart_vtime:
+ .long 0x7fffffff,0xffffffff
.previous
#else
/*
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 1046c2c..bba1449 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -471,7 +471,12 @@
.LPG0:
xc 0x200(256),0x200 # partially clear lowcore
xc 0x300(256),0x300
-
+ l %r1,5f-.LPG0(%r13)
+ stck 0(%r1)
+ spt 6f-.LPG0(%r13)
+ mvc __LC_LAST_UPDATE_CLOCK(8),0(%r1)
+ mvc __LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13)
+ mvc __LC_EXIT_TIMER(8),5f-.LPG0(%r13)
#ifndef CONFIG_MARCH_G5
# check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10}
stidp __LC_CPUID # store cpuid
@@ -496,9 +501,13 @@
brct %r0,0b
#endif
- l %r13,0f-.LPG0(%r13)
+ l %r13,4f-.LPG0(%r13)
b 0(%r13)
-0: .long startup_continue
+ .align 4
+4: .long startup_continue
+5: .long sched_clock_base_cc
+ .align 8
+6: .long 0x7fffffff,0xffffffff
#
# params at 10400 (setup.h)
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index 4bfdc42..28cf196 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -10,6 +10,7 @@
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/hardirq.h>
#include <linux/time.h>
#include <linux/module.h>
#include <asm/lowcore.h>
@@ -253,7 +254,7 @@
struct mci *mci;
int umode;
- lockdep_off();
+ nmi_enter();
s390_idle_check();
mci = (struct mci *) &S390_lowcore.mcck_interruption_code;
@@ -363,7 +364,7 @@
mcck->warning = 1;
set_thread_flag(TIF_MCCK_PENDING);
}
- lockdep_on();
+ nmi_exit();
}
static int __init machine_check_init(void)
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 06201b93..7402b6a 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -82,9 +82,6 @@
unsigned int console_irq = -1;
EXPORT_SYMBOL(console_irq);
-unsigned long machine_flags;
-EXPORT_SYMBOL(machine_flags);
-
unsigned long elf_hwcap = 0;
char elf_platform[ELF_PLATFORM_SIZE];
@@ -426,6 +423,7 @@
__alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE;
lc->current_task = (unsigned long) init_thread_union.thread_info.task;
lc->thread_info = (unsigned long) &init_thread_union;
+ lc->machine_flags = S390_lowcore.machine_flags;
#ifndef CONFIG_64BIT
if (MACHINE_HAS_IEEE) {
lc->extended_save_area_addr = (__u32)
@@ -436,6 +434,14 @@
#else
lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0];
#endif
+ lc->sync_enter_timer = S390_lowcore.sync_enter_timer;
+ lc->async_enter_timer = S390_lowcore.async_enter_timer;
+ lc->exit_timer = S390_lowcore.exit_timer;
+ lc->user_timer = S390_lowcore.user_timer;
+ lc->system_timer = S390_lowcore.system_timer;
+ lc->steal_timer = S390_lowcore.steal_timer;
+ lc->last_update_timer = S390_lowcore.last_update_timer;
+ lc->last_update_clock = S390_lowcore.last_update_clock;
set_prefix((u32)(unsigned long) lc);
lowcore_ptr[0] = lc;
}
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 006ed50..a985a3b 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -571,6 +571,7 @@
cpu_lowcore->current_task = (unsigned long) idle;
cpu_lowcore->cpu_nr = cpu;
cpu_lowcore->kernel_asce = S390_lowcore.kernel_asce;
+ cpu_lowcore->machine_flags = S390_lowcore.machine_flags;
eieio();
while (signal_processor(cpu, sigp_restart) == sigp_busy)
@@ -590,7 +591,8 @@
int pcpus, cpu;
pcpus = simple_strtoul(s, NULL, 0);
- for (cpu = 0; cpu < pcpus && cpu < nr_cpu_ids; cpu++)
+ init_cpu_possible(cpumask_of(0));
+ for (cpu = 1; cpu < pcpus && cpu < nr_cpu_ids; cpu++)
set_cpu_possible(cpu, true);
return 0;
}
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index fe5b25a..2c7739f 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -336,3 +336,5 @@
SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */
SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper)
SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
+SYSCALL(sys_preadv,sys_preadv,compat_sys_preadv_wrapper)
+SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index f72d410..ef596d0 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -52,9 +52,6 @@
#define USECS_PER_JIFFY ((unsigned long) 1000000/HZ)
#define CLK_TICKS_PER_JIFFY ((unsigned long) USECS_PER_JIFFY << 12)
-/* The value of the TOD clock for 1.1.1970. */
-#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL
-
/*
* Create a small time difference between the timer interrupts
* on the different cpus to avoid lock contention.
@@ -63,9 +60,10 @@
#define TICK_SIZE tick
+u64 sched_clock_base_cc = -1; /* Force to data section. */
+
static ext_int_info_t ext_int_info_cc;
static ext_int_info_t ext_int_etr_cc;
-static u64 sched_clock_base_cc;
static DEFINE_PER_CPU(struct clock_event_device, comparators);
@@ -195,25 +193,15 @@
static void etr_reset(void);
static void stp_reset(void);
-/*
- * Get the TOD clock running.
- */
-static u64 __init reset_tod_clock(void)
+unsigned long read_persistent_clock(void)
{
- u64 time;
+ struct timespec ts;
- etr_reset();
- stp_reset();
- if (store_clock(&time) == 0)
- return time;
- /* TOD clock not running. Set the clock to Unix Epoch. */
- if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0)
- panic("TOD clock not operational.");
-
- return TOD_UNIX_EPOCH;
+ tod_to_timeval(get_clock() - TOD_UNIX_EPOCH, &ts);
+ return ts.tv_sec;
}
-static cycle_t read_tod_clock(void)
+static cycle_t read_tod_clock(struct clocksource *cs)
{
return get_clock();
}
@@ -265,12 +253,13 @@
*/
void __init time_init(void)
{
- sched_clock_base_cc = reset_tod_clock();
+ struct timespec ts;
+ unsigned long flags;
+ cycle_t now;
- /* set xtime */
- tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime);
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
+ /* Reset time synchronization interfaces. */
+ etr_reset();
+ stp_reset();
/* request the clock comparator external interrupt */
if (register_early_external_interrupt(0x1004,
@@ -278,17 +267,38 @@
&ext_int_info_cc) != 0)
panic("Couldn't request external interrupt 0x1004");
- if (clocksource_register(&clocksource_tod) != 0)
- panic("Could not register TOD clock source");
-
/* request the timing alert external interrupt */
if (register_early_external_interrupt(0x1406,
timing_alert_interrupt,
&ext_int_etr_cc) != 0)
panic("Couldn't request external interrupt 0x1406");
+ if (clocksource_register(&clocksource_tod) != 0)
+ panic("Could not register TOD clock source");
+
+ /*
+ * The TOD clock is an accurate clock. The xtime should be
+ * initialized in a way that the difference between TOD and
+ * xtime is reasonably small. Too bad that timekeeping_init
+ * sets xtime.tv_nsec to zero. In addition the clock source
+ * change from the jiffies clock source to the TOD clock
+ * source add another error of up to 1/HZ second. The same
+ * function sets wall_to_monotonic to a value that is too
+ * small for /proc/uptime to be accurate.
+ * Reset xtime and wall_to_monotonic to sane values.
+ */
+ write_seqlock_irqsave(&xtime_lock, flags);
+ now = get_clock();
+ tod_to_timeval(now - TOD_UNIX_EPOCH, &xtime);
+ clocksource_tod.cycle_last = now;
+ clocksource_tod.raw_time = xtime;
+ tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &ts);
+ set_normalized_timespec(&wall_to_monotonic, -ts.tv_sec, -ts.tv_nsec);
+ write_sequnlock_irqrestore(&xtime_lock, flags);
+
/* Enable TOD clock interrupts on the boot cpu. */
init_cpu_timer();
+
/* Enable cpu timer interrupts on the boot cpu. */
vtime_init();
}
@@ -1423,6 +1433,7 @@
static void stp_work_fn(struct work_struct *work);
static DEFINE_MUTEX(stp_work_mutex);
static DECLARE_WORK(stp_work, stp_work_fn);
+static struct timer_list stp_timer;
static int __init early_parse_stp(char *p)
{
@@ -1454,10 +1465,16 @@
}
}
+static void stp_timeout(unsigned long dummy)
+{
+ queue_work(time_sync_wq, &stp_work);
+}
+
static int __init stp_init(void)
{
if (!test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
return 0;
+ setup_timer(&stp_timer, stp_timeout, 0UL);
time_init_wq();
if (!stp_online)
return 0;
@@ -1565,6 +1582,7 @@
if (!stp_online) {
chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000);
+ del_timer_sync(&stp_timer);
goto out_unlock;
}
@@ -1586,6 +1604,13 @@
stop_machine(stp_sync_clock, &stp_sync, &cpu_online_map);
put_online_cpus();
+ if (!check_sync_clock())
+ /*
+ * There is a usable clock but the synchonization failed.
+ * Retry after a second.
+ */
+ mod_timer(&stp_timer, jiffies + HZ);
+
out_unlock:
mutex_unlock(&stp_work_mutex);
}
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index ecf0304..38ea92f 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -134,6 +134,8 @@
/* Account time spent with enabled wait psw loaded as idle time. */
idle_time = S390_lowcore.int_clock - idle->idle_enter;
account_idle_time(idle_time);
+ S390_lowcore.steal_timer +=
+ idle->idle_enter - S390_lowcore.last_update_clock;
S390_lowcore.last_update_clock = S390_lowcore.int_clock;
/* Account system time spent going idle. */
@@ -425,17 +427,7 @@
}
EXPORT_SYMBOL(add_virt_timer_periodic);
-/*
- * If we change a pending timer the function must be called on the CPU
- * where the timer is running on, e.g. by smp_call_function_single()
- *
- * The original mod_timer adds the timer if it is not pending. For
- * compatibility we do the same. The timer will be added on the current
- * CPU as a oneshot timer.
- *
- * returns whether it has modified a pending timer (1) or not (0)
- */
-int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
+int __mod_vtimer(struct vtimer_list *timer, __u64 expires, int periodic)
{
struct vtimer_queue *vq;
unsigned long flags;
@@ -444,39 +436,35 @@
BUG_ON(!timer->function);
BUG_ON(!expires || expires > VTIMER_MAX_SLICE);
- /*
- * This is a common optimization triggered by the
- * networking code - if the timer is re-modified
- * to be the same thing then just return:
- */
if (timer->expires == expires && vtimer_pending(timer))
return 1;
cpu = get_cpu();
vq = &per_cpu(virt_cpu_timer, cpu);
- /* check if we run on the right CPU */
- BUG_ON(timer->cpu != cpu);
-
/* disable interrupts before test if timer is pending */
spin_lock_irqsave(&vq->lock, flags);
/* if timer isn't pending add it on the current CPU */
if (!vtimer_pending(timer)) {
spin_unlock_irqrestore(&vq->lock, flags);
- /* we do not activate an interval timer with mod_virt_timer */
- timer->interval = 0;
+
+ if (periodic)
+ timer->interval = expires;
+ else
+ timer->interval = 0;
timer->expires = expires;
timer->cpu = cpu;
internal_add_vtimer(timer);
return 0;
}
+ /* check if we run on the right CPU */
+ BUG_ON(timer->cpu != cpu);
+
list_del_init(&timer->entry);
timer->expires = expires;
-
- /* also change the interval if we have an interval timer */
- if (timer->interval)
+ if (periodic)
timer->interval = expires;
/* the timer can't expire anymore so we can release the lock */
@@ -484,9 +472,32 @@
internal_add_vtimer(timer);
return 1;
}
+
+/*
+ * If we change a pending timer the function must be called on the CPU
+ * where the timer is running on.
+ *
+ * returns whether it has modified a pending timer (1) or not (0)
+ */
+int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
+{
+ return __mod_vtimer(timer, expires, 0);
+}
EXPORT_SYMBOL(mod_virt_timer);
/*
+ * If we change a pending timer the function must be called on the CPU
+ * where the timer is running on.
+ *
+ * returns whether it has modified a pending timer (1) or not (0)
+ */
+int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires)
+{
+ return __mod_vtimer(timer, expires, 1);
+}
+EXPORT_SYMBOL(mod_virt_timer_periodic);
+
+/*
* delete a virtual timer
*
* returns whether the deleted timer was pending (1) or not (0)
@@ -516,16 +527,8 @@
*/
void init_cpu_vtimer(void)
{
- struct thread_info *ti = current_thread_info();
struct vtimer_queue *vq;
- S390_lowcore.user_timer = ti->user_timer;
- S390_lowcore.system_timer = ti->system_timer;
-
- /* kick the virtual timer */
- asm volatile ("STCK %0" : "=m" (S390_lowcore.last_update_clock));
- asm volatile ("STPT %0" : "=m" (S390_lowcore.last_update_timer));
-
/* initialize per cpu vtimer structure */
vq = &__get_cpu_var(virt_cpu_timer);
INIT_LIST_HEAD(&vq->list);
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 5e4babe..e7390dd 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -14,6 +14,7 @@
select HAVE_GENERIC_DMA_COHERENT
select HAVE_IOREMAP_PROT if MMU
select HAVE_ARCH_TRACEHOOK
+ select HAVE_DMA_API_DEBUG
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
@@ -21,7 +22,7 @@
<http://www.linux-sh.org/>.
config SUPERH32
- def_bool !SUPERH64
+ def_bool ARCH = "sh"
select HAVE_KPROBES
select HAVE_KRETPROBES
select HAVE_FUNCTION_TRACER
@@ -31,7 +32,7 @@
select ARCH_HIBERNATION_POSSIBLE if MMU
config SUPERH64
- def_bool y if CPU_SH5
+ def_bool ARCH = "sh64"
config ARCH_DEFCONFIG
string
@@ -187,6 +188,8 @@
bool
select ARCH_SUSPEND_POSSIBLE
+if SUPERH32
+
choice
prompt "Processor sub-type selection"
@@ -408,6 +411,15 @@
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_CMT
+endchoice
+
+endif
+
+if SUPERH64
+
+choice
+ prompt "Processor sub-type selection"
+
# SH-5 Processor Support
config CPU_SUBTYPE_SH5_101
@@ -420,6 +432,8 @@
endchoice
+endif
+
source "arch/sh/mm/Kconfig"
source "arch/sh/Kconfig.cpu"
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 912458f..39e4691 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -349,6 +349,7 @@
static struct ov772x_camera_info ov7725_info = {
.buswidth = SOCAM_DATAWIDTH_8,
.flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
+ .edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0),
.link = {
.power = ov7725_power,
},
diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c
index 8367d1d..beb88c4 100644
--- a/arch/sh/boards/board-urquell.c
+++ b/arch/sh/boards/board-urquell.c
@@ -2,6 +2,8 @@
* Renesas Technology Corp. SH7786 Urquell Support.
*
* Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on board-sh7785lcr.c
* Copyright (C) 2008 Yoshihiro Shimoda
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -21,6 +23,32 @@
#include <asm/heartbeat.h>
#include <asm/sizes.h>
+/*
+ * bit 1234 5678
+ *----------------------------
+ * SW1 0101 0010 -> Pck 33MHz version
+ * (1101 0010) Pck 66MHz version
+ * SW2 0x1x xxxx -> little endian
+ * 29bit mode
+ * SW47 0001 1000 -> CS0 : on-board flash
+ * CS1 : SRAM, registers, LAN, PCMCIA
+ * 38400 bps for SCIF1
+ *
+ * Address
+ * 0x00000000 - 0x04000000 (CS0) Nor Flash
+ * 0x04000000 - 0x04200000 (CS1) SRAM
+ * 0x05000000 - 0x05800000 (CS1) on board register
+ * 0x05800000 - 0x06000000 (CS1) LAN91C111
+ * 0x06000000 - 0x06400000 (CS1) PCMCIA
+ * 0x08000000 - 0x10000000 (CS2-CS3) DDR3
+ * 0x10000000 - 0x14000000 (CS4) PCIe
+ * 0x14000000 - 0x14800000 (CS5) Core0 LRAM/URAM
+ * 0x14800000 - 0x15000000 (CS5) Core1 LRAM/URAM
+ * 0x18000000 - 0x1C000000 (CS6) ATA/NAND-Flash
+ * 0x1C000000 - (CS7) SH7786 Control register
+ */
+
+/* HeartBeat */
static struct resource heartbeat_resources[] = {
[0] = {
.start = BOARDREG(SLEDR),
@@ -43,6 +71,7 @@
.resource = heartbeat_resources,
};
+/* LAN91C111 */
static struct smc91x_platdata smc91x_info = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
};
@@ -69,6 +98,7 @@
},
};
+/* Nor Flash */
static struct mtd_partition nor_flash_partitions[] = {
{
.name = "loader",
diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c
index e8b7446..fb0869f 100644
--- a/arch/sh/drivers/pci/ops-sh7785lcr.c
+++ b/arch/sh/drivers/pci/ops-sh7785lcr.c
@@ -48,8 +48,13 @@
static struct sh4_pci_address_map sh7785_pci_map = {
.window0 = {
+#if defined(CONFIG_32BIT)
+ .base = SH7780_32BIT_DDR_BASE_ADDR,
+ .size = 0x40000000,
+#else
.base = SH7780_CS0_BASE_ADDR,
.size = 0x20000000,
+#endif
},
.flags = SH4_PCIC_NO_RESET,
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
index 97b2c98..93adc71 100644
--- a/arch/sh/drivers/pci/pci-sh7780.h
+++ b/arch/sh/drivers/pci/pci-sh7780.h
@@ -104,6 +104,8 @@
#define SH7780_CS5_BASE_ADDR (SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE)
#define SH7780_CS6_BASE_ADDR (SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE)
+#define SH7780_32BIT_DDR_BASE_ADDR 0x40000000
+
struct sh4_pci_address_map;
/* arch/sh/drivers/pci/pci-sh7780.c */
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index e36c7b8..0d6ac7a1 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/dma-debug.h>
#include <asm/io.h>
static int __init pcibios_init(void)
@@ -43,6 +44,8 @@
pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq);
+ dma_debug_add_bus(&pci_bus_type);
+
return 0;
}
subsys_initcall(pcibios_init);
diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
index 627315e..ea9d4f4 100644
--- a/arch/sh/include/asm/dma-mapping.h
+++ b/arch/sh/include/asm/dma-mapping.h
@@ -3,6 +3,7 @@
#include <linux/mm.h>
#include <linux/scatterlist.h>
+#include <linux/dma-debug.h>
#include <asm/cacheflush.h>
#include <asm/io.h>
#include <asm-generic/dma-coherent.h>
@@ -38,16 +39,26 @@
void *ptr, size_t size,
enum dma_data_direction dir)
{
+ dma_addr_t addr = virt_to_phys(ptr);
+
#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
if (dev->bus == &pci_bus_type)
- return virt_to_phys(ptr);
+ return addr;
#endif
dma_cache_sync(dev, ptr, size, dir);
- return virt_to_phys(ptr);
+ debug_dma_map_page(dev, virt_to_page(ptr),
+ (unsigned long)ptr & ~PAGE_MASK, size,
+ dir, addr, true);
+
+ return addr;
}
-#define dma_unmap_single(dev, addr, size, dir) do { } while (0)
+static inline void dma_unmap_single(struct device *dev, dma_addr_t addr,
+ size_t size, enum dma_data_direction dir)
+{
+ debug_dma_unmap_page(dev, addr, size, dir, true);
+}
static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction dir)
@@ -59,12 +70,19 @@
dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
#endif
sg[i].dma_address = sg_phys(&sg[i]);
+ sg[i].dma_length = sg[i].length;
}
+ debug_dma_map_sg(dev, sg, nents, i, dir);
+
return nents;
}
-#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0)
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir)
+{
+ debug_dma_unmap_sg(dev, sg, nents, dir);
+}
static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size,
@@ -111,6 +129,7 @@
dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
#endif
sg[i].dma_address = sg_phys(&sg[i]);
+ sg[i].dma_length = sg[i].length;
}
}
@@ -119,6 +138,7 @@
enum dma_data_direction dir)
{
dma_sync_single(dev, dma_handle, size, dir);
+ debug_dma_sync_single_for_cpu(dev, dma_handle, size, dir);
}
static inline void dma_sync_single_for_device(struct device *dev,
@@ -127,6 +147,7 @@
enum dma_data_direction dir)
{
dma_sync_single(dev, dma_handle, size, dir);
+ debug_dma_sync_single_for_device(dev, dma_handle, size, dir);
}
static inline void dma_sync_single_range_for_cpu(struct device *dev,
@@ -136,6 +157,8 @@
enum dma_data_direction direction)
{
dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
+ debug_dma_sync_single_range_for_cpu(dev, dma_handle,
+ offset, size, direction);
}
static inline void dma_sync_single_range_for_device(struct device *dev,
@@ -145,6 +168,8 @@
enum dma_data_direction direction)
{
dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
+ debug_dma_sync_single_range_for_device(dev, dma_handle,
+ offset, size, direction);
}
@@ -153,6 +178,7 @@
enum dma_data_direction dir)
{
dma_sync_sg(dev, sg, nelems, dir);
+ debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir);
}
static inline void dma_sync_sg_for_device(struct device *dev,
@@ -160,9 +186,9 @@
enum dma_data_direction dir)
{
dma_sync_sg(dev, sg, nelems, dir);
+ debug_dma_sync_sg_for_device(dev, sg, nelems, dir);
}
-
static inline int dma_get_cache_alignment(void)
{
/*
diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h
index 2084d03..c693d26 100644
--- a/arch/sh/include/asm/scatterlist.h
+++ b/arch/sh/include/asm/scatterlist.h
@@ -5,12 +5,13 @@
struct scatterlist {
#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
+ unsigned long sg_magic;
#endif
- unsigned long page_link;
- unsigned int offset;/* for highmem, page offset */
- dma_addr_t dma_address;
- unsigned int length;
+ unsigned long page_link;
+ unsigned int offset; /* for highmem, page offset */
+ unsigned int length;
+ dma_addr_t dma_address;
+ unsigned int dma_length;
};
#define ISA_DMA_THRESHOLD PHYS_ADDR_MASK
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
index a3f2395..8489a09 100644
--- a/arch/sh/include/asm/topology.h
+++ b/arch/sh/include/asm/topology.h
@@ -37,8 +37,11 @@
#define pcibus_to_node(bus) ((void)(bus), -1)
#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \
CPU_MASK_ALL : \
- node_to_cpumask(pcibus_to_node(bus)) \
- )
+ node_to_cpumask(pcibus_to_node(bus)))
+#define cpumask_of_pcibus(bus) (pcibus_to_node(bus) == -1 ? \
+ CPU_MASK_ALL_PTR : \
+ cpumask_of_node(pcibus_to_node(bus)))
+
#endif
#include <asm-generic/topology.h>
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index d52c000..2efb819 100644
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@@ -341,8 +341,10 @@
#define __NR_dup3 330
#define __NR_pipe2 331
#define __NR_inotify_init1 332
+#define __NR_preadv 333
+#define __NR_pwritev 334
-#define NR_syscalls 333
+#define NR_syscalls 335
#ifdef __KERNEL__
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
index 7c54e91..6eb9d29 100644
--- a/arch/sh/include/asm/unistd_64.h
+++ b/arch/sh/include/asm/unistd_64.h
@@ -381,10 +381,12 @@
#define __NR_dup3 358
#define __NR_pipe2 359
#define __NR_inotify_init1 360
+#define __NR_preadv 361
+#define __NR_pwritev 362
#ifdef __KERNEL__
-#define NR_syscalls 361
+#define NR_syscalls 363
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 0e5d204..406747f 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -256,7 +256,6 @@
{
clk_always_enable("uram0"); /* URAM */
clk_always_enable("xymem0"); /* XYMEM */
- clk_always_enable("rtc0"); /* RTC */
clk_always_enable("veu0"); /* VEU */
clk_always_enable("vpu0"); /* VPU */
clk_always_enable("jpu0"); /* JPU */
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index 5338dac..a800466 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -267,7 +267,6 @@
static int __init sh7723_devices_setup(void)
{
clk_always_enable("meram0"); /* MERAM */
- clk_always_enable("rtc0"); /* RTC */
clk_always_enable("veu1"); /* VEU2H1 */
clk_always_enable("veu0"); /* VEU2H0 */
clk_always_enable("vpu0"); /* VPU */
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index 5a47e1c..90e8cff 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -143,14 +143,14 @@
* Set the PHY and PLL enable bit
*/
__raw_writel(PHY_ENB | PLL_ENB, USBPCTL1);
- while (i-- &&
- ((__raw_readl(USBST) & ACT_PLL_STATUS) != ACT_PLL_STATUS))
+ while (i--) {
+ if (ACT_PLL_STATUS == (__raw_readl(USBST) & ACT_PLL_STATUS)) {
+ /* Set the PHY RST bit */
+ __raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1);
+ printk(KERN_INFO "sh7786 usb setup done\n");
+ break;
+ }
cpu_relax();
-
- if (i) {
- /* Set the PHY RST bit */
- __raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1);
- printk(KERN_INFO "sh7786 usb setup done\n");
}
}
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 58dfc02..e3a7e36 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -63,6 +63,15 @@
unsigned long prot, unsigned long flags,
unsigned long fd, unsigned long pgoff)
{
+ /*
+ * The shift for mmap2 is constant, regardless of PAGE_SIZE
+ * setting.
+ */
+ if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
+ return -EINVAL;
+
+ pgoff >>= PAGE_SHIFT - 12;
+
return do_mmap2(addr, len, prot, flags, fd, pgoff);
}
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index e67c173..05202ed 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -349,3 +349,5 @@
.long sys_dup3 /* 330 */
.long sys_pipe2
.long sys_inotify_init1
+ .long sys_preadv
+ .long sys_writev
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index 557cb91..a083609 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -387,3 +387,5 @@
.long sys_dup3
.long sys_pipe2
.long sys_inotify_init1 /* 360 */
+ .long sys_preadv
+ .long sys_pwritev
diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c
index c34e1e0..1700d24 100644
--- a/arch/sh/kernel/time_32.c
+++ b/arch/sh/kernel/time_32.c
@@ -208,7 +208,7 @@
if (!clocksource_sh.rating)
return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
- cycles = clocksource_sh.read();
+ cycles = clocksource_sh.read(&clocksource_sh);
return cyc2ns(&clocksource_sh, cycles);
}
#endif
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index c5d3396..fe8d893 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -81,7 +81,7 @@
*/
static int tmus_are_scaled;
-static cycle_t tmu_timer_read(void)
+static cycle_t tmu_timer_read(struct clocksource *cs)
{
return ((cycle_t)(~_tmu_read(TMU1)))<<tmus_are_scaled;
}
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index edcd5fb..e098ec1 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -10,11 +10,22 @@
* for more details.
*/
#include <linux/mm.h>
+#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/dma-debug.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
#include <asm/addrspace.h>
-#include <asm/io.h>
+
+#define PREALLOC_DMA_DEBUG_ENTRIES 4096
+
+static int __init dma_init(void)
+{
+ dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+ return 0;
+}
+fs_initcall(dma_init);
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
@@ -45,6 +56,9 @@
split_page(pfn_to_page(virt_to_phys(ret) >> PAGE_SHIFT), order);
*dma_handle = virt_to_phys(ret);
+
+ debug_dma_alloc_coherent(dev, size, *dma_handle, ret_nocache);
+
return ret_nocache;
}
EXPORT_SYMBOL(dma_alloc_coherent);
@@ -56,12 +70,15 @@
unsigned long pfn = dma_handle >> PAGE_SHIFT;
int k;
- if (!dma_release_from_coherent(dev, order, vaddr)) {
- WARN_ON(irqs_disabled()); /* for portability */
- for (k = 0; k < (1 << order); k++)
- __free_pages(pfn_to_page(pfn + k), 0);
- iounmap(vaddr);
- }
+ WARN_ON(irqs_disabled()); /* for portability */
+
+ if (dma_release_from_coherent(dev, order, vaddr))
+ return;
+
+ debug_dma_free_coherent(dev, size, vaddr, dma_handle);
+ for (k = 0; k < (1 << order); k++)
+ __free_pages(pfn_to_page(pfn + k), 0);
+ iounmap(vaddr);
}
EXPORT_SYMBOL(dma_free_coherent);
diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig
index 09ab46e..8bcd27a 100644
--- a/arch/sparc/configs/sparc32_defconfig
+++ b/arch/sparc/configs/sparc32_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Thu Jan 8 16:45:44 2009
+# Linux kernel version: 2.6.30-rc2
+# Fri Apr 17 04:04:46 2009
#
# CONFIG_64BIT is not set
CONFIG_SPARC=y
@@ -30,17 +30,27 @@
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -49,24 +59,28 @@
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -75,12 +89,15 @@
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -93,7 +110,6 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -109,11 +125,6 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -144,6 +155,8 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_SUN_PM=y
# CONFIG_SPARC_LED is not set
CONFIG_SERIAL_CONSOLE=y
@@ -159,6 +172,7 @@
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC32_PCI=y
@@ -175,8 +189,6 @@
#
# Networking options
#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -251,6 +263,7 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -263,7 +276,6 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -313,12 +325,16 @@
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -375,8 +391,10 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -398,6 +416,7 @@
CONFIG_SCSI_SUNESP=y
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -413,6 +432,7 @@
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -430,6 +450,8 @@
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -448,6 +470,7 @@
# CONFIG_E1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
@@ -462,6 +485,7 @@
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -471,6 +495,7 @@
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -480,6 +505,7 @@
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -487,7 +513,6 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -537,7 +562,6 @@
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -597,6 +621,7 @@
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -688,7 +713,6 @@
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -700,7 +724,7 @@
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -750,6 +774,7 @@
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -777,6 +802,7 @@
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -786,6 +812,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -820,14 +851,20 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
@@ -838,7 +875,6 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -911,6 +947,9 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -939,15 +978,7 @@
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
@@ -979,10 +1010,12 @@
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
@@ -1052,6 +1085,7 @@
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@@ -1059,6 +1093,7 @@
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1074,7 +1109,10 @@
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index ade4994..b5d63bd 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,13 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Jan 2 18:14:26 2009
+# Linux kernel version: 2.6.30-rc2
+# Fri Apr 17 02:03:07 2009
#
+CONFIG_64BIT=y
CONFIG_SPARC=y
+# CONFIG_SPARC32 is not set
CONFIG_SPARC64=y
CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc64_defconfig"
CONFIG_BITS=64
-CONFIG_64BIT=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_CLOCKEVENTS=y
@@ -22,6 +23,7 @@
CONFIG_MMU=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_OF=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -36,17 +38,27 @@
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
@@ -55,24 +67,28 @@
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -82,6 +98,7 @@
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
@@ -91,15 +108,16 @@
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -107,10 +125,8 @@
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
@@ -127,11 +143,6 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -185,11 +196,12 @@
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
@@ -210,6 +222,8 @@
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC64_PCI=y
@@ -229,8 +243,6 @@
#
# Networking options
#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -292,25 +304,7 @@
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_DCCP_CCID2=m
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_NET_DCCPPROBE is not set
+# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
@@ -326,6 +320,7 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -334,18 +329,19 @@
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -389,19 +385,27 @@
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
@@ -439,6 +443,7 @@
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
@@ -506,8 +511,10 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -528,6 +535,7 @@
# CONFIG_SCSI_SUNESP is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
@@ -536,7 +544,7 @@
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
-# CONFIG_MD_RAID5_RESHAPE is not set
+CONFIG_MD_RAID6_PQ=m
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
@@ -561,6 +569,7 @@
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -589,14 +598,16 @@
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
+CONFIG_SUNLANCE=m
+CONFIG_HAPPYMEAL=m
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-CONFIG_CASSINI=m
+CONFIG_SUNGEM=m
+# CONFIG_CASSINI is not set
CONFIG_SUNVNET=m
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -631,9 +642,10 @@
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
-# CONFIG_E1000E is not set
+CONFIG_E1000E=m
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
@@ -648,6 +660,7 @@
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -657,6 +670,7 @@
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
CONFIG_NIU=m
@@ -666,6 +680,7 @@
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -673,7 +688,10 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
@@ -738,7 +756,6 @@
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -805,6 +822,7 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_N2RNG=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -867,12 +885,9 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -897,12 +912,14 @@
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -917,10 +934,14 @@
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -957,10 +978,12 @@
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
@@ -1053,6 +1076,7 @@
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -1141,6 +1165,8 @@
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
@@ -1197,28 +1223,31 @@
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
@@ -1247,6 +1276,7 @@
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
@@ -1268,18 +1298,17 @@
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1315,7 +1344,6 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1327,6 +1355,11 @@
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1390,6 +1423,7 @@
CONFIG_RTC_DRV_SUN4V=y
CONFIG_RTC_DRV_STARFIRE=y
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1412,6 +1446,7 @@
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
@@ -1426,6 +1461,7 @@
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1435,6 +1471,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1460,10 +1501,7 @@
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
@@ -1473,6 +1511,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -1481,6 +1520,7 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
@@ -1555,6 +1595,9 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
@@ -1590,10 +1633,12 @@
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1602,18 +1647,21 @@
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
#
# Security options
@@ -1642,10 +1690,12 @@
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
@@ -1715,6 +1765,7 @@
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@@ -1723,11 +1774,13 @@
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
@@ -1737,8 +1790,11 @@
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h
index ce46597..bb91b12 100644
--- a/arch/sparc/include/asm/atomic_32.h
+++ b/arch/sparc/include/asm/atomic_32.h
@@ -15,6 +15,8 @@
#ifdef __KERNEL__
+#include <asm/system.h>
+
#define ATOMIC_INIT(i) { (i) }
extern int __atomic_add_return(int, atomic_t *);
diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h
index dff3f02..ff9ead6 100644
--- a/arch/sparc/include/asm/parport.h
+++ b/arch/sparc/include/asm/parport.h
@@ -117,7 +117,7 @@
if (!strcmp(parent->name, "dma")) {
p = parport_pc_probe_port(base, base + 0x400,
op->irqs[0], PARPORT_DMA_NOFIFO,
- op->dev.parent->parent);
+ op->dev.parent->parent, 0);
if (!p)
return -ENOMEM;
dev_set_drvdata(&op->dev, p);
@@ -168,7 +168,8 @@
p = parport_pc_probe_port(base, base + 0x400,
op->irqs[0],
slot,
- op->dev.parent);
+ op->dev.parent,
+ 0);
err = -ENOMEM;
if (!p)
goto out_disable_irq;
diff --git a/arch/sparc/kernel/ldc.c b/arch/sparc/kernel/ldc.c
index 6ce5d25..adf5f27 100644
--- a/arch/sparc/kernel/ldc.c
+++ b/arch/sparc/kernel/ldc.c
@@ -1183,8 +1183,7 @@
free_queue(lp->tx_num_entries, lp->tx_base);
out_free_mssbuf:
- if (mssbuf)
- kfree(mssbuf);
+ kfree(mssbuf);
out_free_iommu:
ldc_iommu_release(lp);
@@ -1217,8 +1216,7 @@
hlist_del(&lp->list);
- if (lp->mssbuf)
- kfree(lp->mssbuf);
+ kfree(lp->mssbuf);
ldc_iommu_release(lp);
diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c
index 0a83bd7..c8f14c1 100644
--- a/arch/sparc/kernel/of_device_32.c
+++ b/arch/sparc/kernel/of_device_32.c
@@ -246,8 +246,25 @@
static int of_bus_sbus_match(struct device_node *np)
{
- return !strcmp(np->name, "sbus") ||
- !strcmp(np->name, "sbi");
+ struct device_node *dp = np;
+
+ while (dp) {
+ if (!strcmp(dp->name, "sbus") ||
+ !strcmp(dp->name, "sbi"))
+ return 1;
+
+ /* Have a look at use_1to1_mapping(). We're trying
+ * to match SBUS if that's the top-level bus and we
+ * don't have some intervening real bus that provides
+ * ranges based translations.
+ */
+ if (of_find_property(dp, "ranges", NULL) != NULL)
+ break;
+
+ dp = dp->parent;
+ }
+
+ return 0;
}
static void of_bus_sbus_count_cells(struct device_node *child,
diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c
index 27381f1..5ac287a 100644
--- a/arch/sparc/kernel/of_device_64.c
+++ b/arch/sparc/kernel/of_device_64.c
@@ -300,8 +300,25 @@
static int of_bus_sbus_match(struct device_node *np)
{
- return !strcmp(np->name, "sbus") ||
- !strcmp(np->name, "sbi");
+ struct device_node *dp = np;
+
+ while (dp) {
+ if (!strcmp(dp->name, "sbus") ||
+ !strcmp(dp->name, "sbi"))
+ return 1;
+
+ /* Have a look at use_1to1_mapping(). We're trying
+ * to match SBUS if that's the top-level bus and we
+ * don't have some intervening real bus that provides
+ * ranges based translations.
+ */
+ if (of_find_property(dp, "ranges", NULL) != NULL)
+ break;
+
+ dp = dp->parent;
+ }
+
+ return 0;
}
static void of_bus_sbus_count_cells(struct device_node *child,
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index 708e12a..f7642e5a 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -118,9 +118,9 @@
while (!cpu_isset(cpuid, smp_commenced_mask))
rmb();
- ipi_call_lock();
+ ipi_call_lock_irq();
cpu_set(cpuid, cpu_online_map);
- ipi_call_unlock();
+ ipi_call_unlock_irq();
/* idle thread is expected to have preempt disabled */
preempt_disable();
diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c
index e800503..f5000a4 100644
--- a/arch/sparc/kernel/sys_sparc32.c
+++ b/arch/sparc/kernel/sys_sparc32.c
@@ -206,21 +206,12 @@
struct compat_stat64 __user * statbuf, int flag)
{
struct kstat stat;
- int error = -EINVAL;
+ int error;
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_compat_stat64(&stat, statbuf);
-
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_compat_stat64(&stat, statbuf);
}
asmlinkage long compat_sys_sysfs(int option, u32 arg1, u32 arg2)
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index db310aa..5c12e79 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -814,6 +814,11 @@
}
EXPORT_SYMBOL(udelay);
+static cycle_t clocksource_tick_read(struct clocksource *cs)
+{
+ return tick_ops->get_tick();
+}
+
void __init time_init(void)
{
unsigned long freq = sparc64_init_timers();
@@ -827,7 +832,7 @@
clocksource_tick.mult =
clocksource_hz2mult(freq,
clocksource_tick.shift);
- clocksource_tick.read = tick_ops->get_tick;
+ clocksource_tick.read = clocksource_tick_read;
printk("clocksource: mult[%x] shift[%d]\n",
clocksource_tick.mult, clocksource_tick.shift);
diff --git a/arch/um/Kconfig.rest b/arch/um/Kconfig.rest
index 7b5cea7..0ccad0ff 100644
--- a/arch/um/Kconfig.rest
+++ b/arch/um/Kconfig.rest
@@ -36,7 +36,7 @@
#This is just to shut up some Kconfig warnings, so no prompt.
config INPUT
- bool
+ tristate
default n
source "arch/um/Kconfig.debug"
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index b13a87a..c8b9c46 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -65,7 +65,7 @@
return IRQ_HANDLED;
}
-static cycle_t itimer_read(void)
+static cycle_t itimer_read(struct clocksource *cs)
{
return os_nsecs() / 1000;
}
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index bc25b9f..c9086e6 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -353,6 +353,7 @@
bool "SGI Ultraviolet"
depends on X86_64
depends on X86_EXTENDED_PLATFORM
+ depends on NUMA
select X86_X2APIC
---help---
This option is needed in order to support SGI Ultraviolet systems.
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 924e156..8130334 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -506,6 +506,7 @@
bool "Branch Trace Store"
default y
depends on X86_DEBUGCTLMSR
+ depends on BROKEN
---help---
This adds a ptrace interface to the hardware's branch trace store.
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index efac92f..085a8c3 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -129,21 +129,12 @@
struct stat64 __user *statbuf, int flag)
{
struct kstat stat;
- int error = -EINVAL;
+ int error;
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_stat64(statbuf, &stat);
-
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_stat64(statbuf, &stat);
}
/*
diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
index 5623c50..c45f415 100644
--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -37,7 +37,7 @@
struct gdt_page {
struct desc_struct gdt[GDT_ENTRIES];
} __attribute__((aligned(PAGE_SIZE)));
-DECLARE_PER_CPU(struct gdt_page, gdt_page);
+DECLARE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page);
static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu)
{
diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index 039db6a..37555e5 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -26,7 +26,7 @@
#endif
} ____cacheline_aligned irq_cpustat_t;
-DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
+DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
/* We can have at most NR_VECTORS irqs routed to a cpu at a time */
#define MAX_HARDIRQS_PER_CPU NR_VECTORS
diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
index 0f4ee71..faae199 100644
--- a/arch/x86/include/asm/lguest_hcall.h
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -5,7 +5,6 @@
#define LHCALL_FLUSH_ASYNC 0
#define LHCALL_LGUEST_INIT 1
#define LHCALL_SHUTDOWN 2
-#define LHCALL_LOAD_GDT 3
#define LHCALL_NEW_PGTABLE 4
#define LHCALL_FLUSH_TLB 5
#define LHCALL_LOAD_IDT_ENTRY 6
@@ -17,6 +16,7 @@
#define LHCALL_SET_PMD 15
#define LHCALL_LOAD_TLS 16
#define LHCALL_NOTIFY 17
+#define LHCALL_LOAD_GDT_ENTRY 18
#define LGUEST_TRAP_ENTRY 0x1F
diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h
index 2cd07b9..7af14e5 100644
--- a/arch/x86/include/asm/pat.h
+++ b/arch/x86/include/asm/pat.h
@@ -18,9 +18,5 @@
extern int kernel_map_sync_memtype(u64 base, unsigned long size,
unsigned long flag);
-extern void map_devmem(unsigned long pfn, unsigned long size,
- struct pgprot vma_prot);
-extern void unmap_devmem(unsigned long pfn, unsigned long size,
- struct pgprot vma_prot);
#endif /* _ASM_X86_PAT_H */
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index fcf4d92..c2cceae 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -138,7 +138,7 @@
extern __u32 cleared_cpu_caps[NCAPINTS];
#ifdef CONFIG_SMP
-DECLARE_PER_CPU(struct cpuinfo_x86, cpu_info);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
#define cpu_data(cpu) per_cpu(cpu_info, cpu)
#define current_cpu_data __get_cpu_var(cpu_info)
#else
@@ -270,7 +270,7 @@
} ____cacheline_aligned;
-DECLARE_PER_CPU(struct tss_struct, init_tss);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss);
/*
* Save the original ist values for checking stack pointers during debugging
@@ -393,7 +393,7 @@
};
};
-DECLARE_PER_CPU(union irq_stack_union, irq_stack_union);
+DECLARE_PER_CPU_FIRST(union irq_stack_union, irq_stack_union);
DECLARE_INIT_PER_CPU(irq_stack_union);
DECLARE_PER_CPU(char *, irq_stack_ptr);
diff --git a/arch/x86/include/asm/required-features.h b/arch/x86/include/asm/required-features.h
index d5cd6c5..a4737dd 100644
--- a/arch/x86/include/asm/required-features.h
+++ b/arch/x86/include/asm/required-features.h
@@ -50,7 +50,7 @@
#ifdef CONFIG_X86_64
#define NEED_PSE 0
#define NEED_MSR (1<<(X86_FEATURE_MSR & 31))
-#define NEED_PGE (1<<(X86_FEATURE_PGE & 31))
+#define NEED_PGE 0
#define NEED_FXSR (1<<(X86_FEATURE_FXSR & 31))
#define NEED_XMM (1<<(X86_FEATURE_XMM & 31))
#define NEED_XMM2 (1<<(X86_FEATURE_XMM2 & 31))
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index d3539f9..16a5c84 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -152,7 +152,7 @@
struct mm_struct *active_mm;
int state;
};
-DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate);
static inline void reset_lazy_tlbstate(void)
{
diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
index db68ac8..2cae46c 100644
--- a/arch/x86/include/asm/uv/uv_mmrs.h
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -17,6 +17,11 @@
/* ========================================================================= */
/* UVH_BAU_DATA_CONFIG */
/* ========================================================================= */
+#define UVH_LB_BAU_MISC_CONTROL 0x320170UL
+#define UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT 15
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT 16
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x000000000bUL
+/* 1011 timebase 7 (168millisec) * 3 ticks -> 500ms */
#define UVH_BAU_DATA_CONFIG 0x61680UL
#define UVH_BAU_DATA_CONFIG_32 0x0438
diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
index 1a918dd..018a0a4 100644
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -124,7 +124,8 @@
/* VIRT <-> MACHINE conversion */
#define virt_to_machine(v) (phys_to_machine(XPADDR(__pa(v))))
-#define virt_to_mfn(v) (pfn_to_mfn(PFN_DOWN(__pa(v))))
+#define virt_to_pfn(v) (PFN_DOWN(__pa(v)))
+#define virt_to_mfn(v) (pfn_to_mfn(virt_to_pfn(v)))
#define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT))
static inline unsigned long pte_mfn(pte_t pte)
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 1248318..de1a50a 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -549,7 +549,8 @@
unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
int max_pnode = 0;
- unsigned long mmr_base, present;
+ unsigned long mmr_base, present, paddr;
+ unsigned short pnode_mask;
map_low_mmrs();
@@ -592,6 +593,7 @@
}
}
+ pnode_mask = (1 << n_val) - 1;
node_id.v = uv_read_local_mmr(UVH_NODE_ID);
gnode_upper = (((unsigned long)node_id.s.node_id) &
~((1 << n_val) - 1)) << m_val;
@@ -615,7 +617,7 @@
uv_cpu_hub_info(cpu)->numa_blade_id = blade;
uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
uv_cpu_hub_info(cpu)->pnode = pnode;
- uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1;
+ uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
@@ -631,6 +633,16 @@
lcpu, blade);
}
+ /* Add blade/pnode info for nodes without cpus */
+ for_each_online_node(nid) {
+ if (uv_node_to_blade[nid] >= 0)
+ continue;
+ paddr = node_start_pfn(nid) << PAGE_SHIFT;
+ pnode = (paddr >> m_val) & pnode_mask;
+ blade = boot_pnode_to_blade(pnode);
+ uv_node_to_blade[nid] = blade;
+ }
+
map_gru_high(max_pnode);
map_mmr_high(max_pnode);
map_config_high(max_pnode);
diff --git a/arch/x86/kernel/bios_uv.c b/arch/x86/kernel/bios_uv.c
index f638827..63a88e1 100644
--- a/arch/x86/kernel/bios_uv.c
+++ b/arch/x86/kernel/bios_uv.c
@@ -182,7 +182,8 @@
memcpy(&uv_systab, tab, sizeof(struct uv_systab));
iounmap(tab);
- printk(KERN_INFO "EFI UV System Table Revision %d\n", tab->revision);
+ printk(KERN_INFO "EFI UV System Table Revision %d\n",
+ uv_systab.revision);
}
#else /* !CONFIG_EFI */
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 3e3cd3d..ecdb682 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -204,7 +204,13 @@
static void drv_write(struct drv_cmd *cmd)
{
+ int this_cpu;
+
+ this_cpu = get_cpu();
+ if (cpumask_test_cpu(this_cpu, cmd->mask))
+ do_drv_write(cmd);
smp_call_function_many(cmd->mask, do_drv_write, cmd, 1);
+ put_cpu();
}
static u32 get_cur_val(const struct cpumask *mask)
@@ -277,7 +283,7 @@
unsigned int perf_percent;
unsigned int retval;
- if (smp_call_function_single(cpu, read_measured_perf_ctrs, &cur, 1))
+ if (smp_call_function_single(cpu, read_measured_perf_ctrs, &readin, 1))
return 0;
cur.aperf.whole = readin.aperf.whole -
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 648b3a2..3f0019e 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -722,7 +722,7 @@
/*
* Clock source related code
*/
-static cycle_t read_hpet(void)
+static cycle_t read_hpet(struct clocksource *cs)
{
return (cycle_t)hpet_readl(HPET_COUNTER);
}
@@ -756,7 +756,7 @@
hpet_restart_counter();
/* Verify whether hpet counter works */
- t1 = read_hpet();
+ t1 = hpet_readl(HPET_COUNTER);
rdtscll(start);
/*
@@ -770,7 +770,7 @@
rdtscll(now);
} while ((now - start) < 200000UL);
- if (t1 == read_hpet()) {
+ if (t1 == hpet_readl(HPET_COUNTER)) {
printk(KERN_WARNING
"HPET counter not counting. HPET disabled\n");
return -ENODEV;
diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index 3475440..c2e0bb0 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -129,7 +129,7 @@
* to just read by itself. So use jiffies to emulate a free
* running counter:
*/
-static cycle_t pit_read(void)
+static cycle_t pit_read(struct clocksource *cs)
{
static int old_count;
static u32 old_jifs;
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 137f2e8..223af43 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -77,6 +77,11 @@
return ret;
}
+static cycle_t kvm_clock_get_cycles(struct clocksource *cs)
+{
+ return kvm_clock_read();
+}
+
/*
* If we don't do that, there is the possibility that the guest
* will calibrate under heavy load - thus, getting a lower lpj -
@@ -107,7 +112,7 @@
static struct clocksource kvm_clock = {
.name = "kvm-clock",
- .read = kvm_clock_read,
+ .read = kvm_clock_get_cycles,
.rating = 400,
.mask = CLOCKSOURCE_MASK(64),
.mult = 1 << KVM_SCALE,
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index a0f3851..98c470c 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -108,40 +108,29 @@
EXPORT_SYMBOL_GPL(ucode_cpu_info);
#ifdef CONFIG_MICROCODE_OLD_INTERFACE
-struct update_for_cpu {
- const void __user *buf;
- size_t size;
-};
-
-static long update_for_cpu(void *_ufc)
-{
- struct update_for_cpu *ufc = _ufc;
- int error;
-
- error = microcode_ops->request_microcode_user(smp_processor_id(),
- ufc->buf, ufc->size);
- if (error < 0)
- return error;
- if (!error)
- microcode_ops->apply_microcode(smp_processor_id());
- return error;
-}
-
static int do_microcode_update(const void __user *buf, size_t size)
{
+ cpumask_t old;
int error = 0;
int cpu;
- struct update_for_cpu ufc = { .buf = buf, .size = size };
+
+ old = current->cpus_allowed;
for_each_online_cpu(cpu) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
if (!uci->valid)
continue;
- error = work_on_cpu(cpu, update_for_cpu, &ufc);
+
+ set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+ error = microcode_ops->request_microcode_user(cpu, buf, size);
if (error < 0)
- break;
+ goto out;
+ if (!error)
+ microcode_ops->apply_microcode(cpu);
}
+out:
+ set_cpus_allowed_ptr(current, &old);
return error;
}
@@ -391,8 +380,6 @@
return err;
err = microcode_init_cpu(cpu);
- if (err)
- sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
return err;
}
diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index 34f12e9..221a385 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -50,7 +50,7 @@
return swiotlb_alloc_coherent(hwdev, size, dma_handle, flags);
}
-struct dma_map_ops swiotlb_dma_ops = {
+static struct dma_map_ops swiotlb_dma_ops = {
.mapping_error = swiotlb_dma_mapping_error,
.alloc_coherent = x86_swiotlb_alloc_coherent,
.free_coherent = swiotlb_free_coherent,
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index deb5ebb..ed0c337 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -25,6 +25,8 @@
/* position of pnode (which is nasid>>1): */
static int uv_nshift __read_mostly;
+/* base pnode in this partition */
+static int uv_partition_base_pnode __read_mostly;
static unsigned long uv_mmask __read_mostly;
@@ -32,6 +34,34 @@
static DEFINE_PER_CPU(struct bau_control, bau_control);
/*
+ * Determine the first node on a blade.
+ */
+static int __init blade_to_first_node(int blade)
+{
+ int node, b;
+
+ for_each_online_node(node) {
+ b = uv_node_to_blade_id(node);
+ if (blade == b)
+ return node;
+ }
+ return -1; /* shouldn't happen */
+}
+
+/*
+ * Determine the apicid of the first cpu on a blade.
+ */
+static int __init blade_to_first_apicid(int blade)
+{
+ int cpu;
+
+ for_each_present_cpu(cpu)
+ if (blade == uv_cpu_to_blade_id(cpu))
+ return per_cpu(x86_cpu_to_apicid, cpu);
+ return -1;
+}
+
+/*
* Free a software acknowledge hardware resource by clearing its Pending
* bit. This will return a reply to the sender.
* If the message has timed out, a reply has already been sent by the
@@ -67,7 +97,7 @@
msp = __get_cpu_var(bau_control).msg_statuses + msg_slot;
cpu = uv_blade_processor_id();
msg->number_of_cpus =
- uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
+ uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
this_cpu_mask = 1UL << cpu;
if (msp->seen_by.bits & this_cpu_mask)
return;
@@ -215,14 +245,14 @@
* Returns @flush_mask if some remote flushing remains to be done. The
* mask will have some bits still set.
*/
-const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade,
+const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode,
struct bau_desc *bau_desc,
struct cpumask *flush_mask)
{
int completion_status = 0;
int right_shift;
int tries = 0;
- int blade;
+ int pnode;
int bit;
unsigned long mmr_offset;
unsigned long index;
@@ -265,8 +295,8 @@
* use the IPI method of shootdown on them.
*/
for_each_cpu(bit, flush_mask) {
- blade = uv_cpu_to_blade_id(bit);
- if (blade == this_blade)
+ pnode = uv_cpu_to_pnode(bit);
+ if (pnode == this_pnode)
continue;
cpumask_clear_cpu(bit, flush_mask);
}
@@ -309,16 +339,16 @@
struct cpumask *flush_mask = __get_cpu_var(uv_flush_tlb_mask);
int i;
int bit;
- int blade;
+ int pnode;
int uv_cpu;
- int this_blade;
+ int this_pnode;
int locals = 0;
struct bau_desc *bau_desc;
cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu));
uv_cpu = uv_blade_processor_id();
- this_blade = uv_numa_blade_id();
+ this_pnode = uv_hub_info->pnode;
bau_desc = __get_cpu_var(bau_control).descriptor_base;
bau_desc += UV_ITEMS_PER_DESCRIPTOR * uv_cpu;
@@ -326,13 +356,14 @@
i = 0;
for_each_cpu(bit, flush_mask) {
- blade = uv_cpu_to_blade_id(bit);
- BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1));
- if (blade == this_blade) {
+ pnode = uv_cpu_to_pnode(bit);
+ BUG_ON(pnode > (UV_DISTRIBUTION_SIZE - 1));
+ if (pnode == this_pnode) {
locals++;
continue;
}
- bau_node_set(blade, &bau_desc->distribution);
+ bau_node_set(pnode - uv_partition_base_pnode,
+ &bau_desc->distribution);
i++;
}
if (i == 0) {
@@ -350,7 +381,7 @@
bau_desc->payload.address = va;
bau_desc->payload.sending_cpu = cpu;
- return uv_flush_send_and_wait(uv_cpu, this_blade, bau_desc, flush_mask);
+ return uv_flush_send_and_wait(uv_cpu, this_pnode, bau_desc, flush_mask);
}
/*
@@ -418,24 +449,58 @@
set_irq_regs(old_regs);
}
+/*
+ * uv_enable_timeouts
+ *
+ * Each target blade (i.e. blades that have cpu's) needs to have
+ * shootdown message timeouts enabled. The timeout does not cause
+ * an interrupt, but causes an error message to be returned to
+ * the sender.
+ */
static void uv_enable_timeouts(void)
{
- int i;
int blade;
- int last_blade;
+ int nblades;
int pnode;
- int cur_cpu = 0;
- unsigned long apicid;
+ unsigned long mmr_image;
- last_blade = -1;
- for_each_online_node(i) {
- blade = uv_node_to_blade_id(i);
- if (blade == last_blade)
+ nblades = uv_num_possible_blades();
+
+ for (blade = 0; blade < nblades; blade++) {
+ if (!uv_blade_nr_possible_cpus(blade))
continue;
- last_blade = blade;
- apicid = per_cpu(x86_cpu_to_apicid, cur_cpu);
+
pnode = uv_blade_to_pnode(blade);
- cur_cpu += uv_blade_nr_possible_cpus(i);
+ mmr_image =
+ uv_read_global_mmr64(pnode, UVH_LB_BAU_MISC_CONTROL);
+ /*
+ * Set the timeout period and then lock it in, in three
+ * steps; captures and locks in the period.
+ *
+ * To program the period, the SOFT_ACK_MODE must be off.
+ */
+ mmr_image &= ~((unsigned long)1 <<
+ UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT);
+ uv_write_global_mmr64
+ (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
+ /*
+ * Set the 4-bit period.
+ */
+ mmr_image &= ~((unsigned long)0xf <<
+ UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT);
+ mmr_image |= (UV_INTD_SOFT_ACK_TIMEOUT_PERIOD <<
+ UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT);
+ uv_write_global_mmr64
+ (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
+ /*
+ * Subsequent reversals of the timebase bit (3) cause an
+ * immediate timeout of one or all INTD resources as
+ * indicated in bits 2:0 (7 causes all of them to timeout).
+ */
+ mmr_image |= ((unsigned long)1 <<
+ UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT);
+ uv_write_global_mmr64
+ (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
}
}
@@ -482,8 +547,7 @@
stat->requestee, stat->onetlb, stat->alltlb,
stat->s_retry, stat->d_retry, stat->ptc_i);
seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n",
- uv_read_global_mmr64(uv_blade_to_pnode
- (uv_cpu_to_blade_id(cpu)),
+ uv_read_global_mmr64(uv_cpu_to_pnode(cpu),
UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE),
stat->sflush, stat->dflush,
stat->retriesok, stat->nomsg,
@@ -617,16 +681,18 @@
* finish the initialization of the per-blade control structures
*/
static void __init
-uv_table_bases_finish(int blade, int node, int cur_cpu,
+uv_table_bases_finish(int blade,
struct bau_control *bau_tablesp,
struct bau_desc *adp)
{
struct bau_control *bcp;
- int i;
+ int cpu;
- for (i = cur_cpu; i < cur_cpu + uv_blade_nr_possible_cpus(blade); i++) {
- bcp = (struct bau_control *)&per_cpu(bau_control, i);
+ for_each_present_cpu(cpu) {
+ if (blade != uv_cpu_to_blade_id(cpu))
+ continue;
+ bcp = (struct bau_control *)&per_cpu(bau_control, cpu);
bcp->bau_msg_head = bau_tablesp->va_queue_first;
bcp->va_queue_first = bau_tablesp->va_queue_first;
bcp->va_queue_last = bau_tablesp->va_queue_last;
@@ -649,11 +715,10 @@
struct bau_desc *adp;
struct bau_desc *ad2;
- adp = (struct bau_desc *)
- kmalloc_node(16384, GFP_KERNEL, node);
+ adp = (struct bau_desc *)kmalloc_node(16384, GFP_KERNEL, node);
BUG_ON(!adp);
- pa = __pa((unsigned long)adp);
+ pa = uv_gpa(adp); /* need the real nasid*/
n = pa >> uv_nshift;
m = pa & uv_mmask;
@@ -667,8 +732,12 @@
for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) {
memset(ad2, 0, sizeof(struct bau_desc));
ad2->header.sw_ack_flag = 1;
- ad2->header.base_dest_nodeid =
- uv_blade_to_pnode(uv_cpu_to_blade_id(0));
+ /*
+ * base_dest_nodeid is the first node in the partition, so
+ * the bit map will indicate partition-relative node numbers.
+ * note that base_dest_nodeid is actually a nasid.
+ */
+ ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1;
ad2->header.command = UV_NET_ENDPOINT_INTD;
ad2->header.int_both = 1;
/*
@@ -686,6 +755,8 @@
uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp)
{
struct bau_payload_queue_entry *pqp;
+ unsigned long pa;
+ int pn;
char *cp;
pqp = (struct bau_payload_queue_entry *) kmalloc_node(
@@ -696,10 +767,14 @@
cp = (char *)pqp + 31;
pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5);
bau_tablesp->va_queue_first = pqp;
+ /*
+ * need the pnode of where the memory was really allocated
+ */
+ pa = uv_gpa(pqp);
+ pn = pa >> uv_nshift;
uv_write_global_mmr64(pnode,
UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST,
- ((unsigned long)pnode <<
- UV_PAYLOADQ_PNODE_SHIFT) |
+ ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) |
uv_physnodeaddr(pqp));
uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL,
uv_physnodeaddr(pqp));
@@ -715,8 +790,9 @@
/*
* Initialization of each UV blade's structures
*/
-static int __init uv_init_blade(int blade, int node, int cur_cpu)
+static int __init uv_init_blade(int blade)
{
+ int node;
int pnode;
unsigned long pa;
unsigned long apicid;
@@ -724,16 +800,17 @@
struct bau_payload_queue_entry *pqp;
struct bau_control *bau_tablesp;
+ node = blade_to_first_node(blade);
bau_tablesp = uv_table_bases_init(blade, node);
pnode = uv_blade_to_pnode(blade);
adp = uv_activation_descriptor_init(node, pnode);
pqp = uv_payload_queue_init(node, pnode, bau_tablesp);
- uv_table_bases_finish(blade, node, cur_cpu, bau_tablesp, adp);
+ uv_table_bases_finish(blade, bau_tablesp, adp);
/*
* the below initialization can't be in firmware because the
* messaging IRQ will be determined by the OS
*/
- apicid = per_cpu(x86_cpu_to_apicid, cur_cpu);
+ apicid = blade_to_first_apicid(blade);
pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG);
if ((pa & 0xff) != UV_BAU_MESSAGE) {
uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
@@ -748,9 +825,7 @@
static int __init uv_bau_init(void)
{
int blade;
- int node;
int nblades;
- int last_blade;
int cur_cpu;
if (!is_uv_system())
@@ -763,29 +838,21 @@
uv_bau_retry_limit = 1;
uv_nshift = uv_hub_info->n_val;
uv_mmask = (1UL << uv_hub_info->n_val) - 1;
- nblades = 0;
- last_blade = -1;
- cur_cpu = 0;
- for_each_online_node(node) {
- blade = uv_node_to_blade_id(node);
- if (blade == last_blade)
- continue;
- last_blade = blade;
- nblades++;
- }
+ nblades = uv_num_possible_blades();
+
uv_bau_table_bases = (struct bau_control **)
kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL);
BUG_ON(!uv_bau_table_bases);
- last_blade = -1;
- for_each_online_node(node) {
- blade = uv_node_to_blade_id(node);
- if (blade == last_blade)
- continue;
- last_blade = blade;
- uv_init_blade(blade, node, cur_cpu);
- cur_cpu += uv_blade_nr_possible_cpus(blade);
- }
+ uv_partition_base_pnode = 0x7fffffff;
+ for (blade = 0; blade < nblades; blade++)
+ if (uv_blade_nr_possible_cpus(blade) &&
+ (uv_blade_to_pnode(blade) < uv_partition_base_pnode))
+ uv_partition_base_pnode = uv_blade_to_pnode(blade);
+ for (blade = 0; blade < nblades; blade++)
+ if (uv_blade_nr_possible_cpus(blade))
+ uv_init_blade(blade);
+
alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
uv_enable_timeouts();
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 7a567eb..d57de05 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -699,7 +699,7 @@
* code, which is necessary to support wrapping clocksources like pm
* timer.
*/
-static cycle_t read_tsc(void)
+static cycle_t read_tsc(struct clocksource *cs)
{
cycle_t ret = (cycle_t)get_cycles();
diff --git a/arch/x86/kernel/uv_sysfs.c b/arch/x86/kernel/uv_sysfs.c
index 67f9b9d..36afb98 100644
--- a/arch/x86/kernel/uv_sysfs.c
+++ b/arch/x86/kernel/uv_sysfs.c
@@ -21,6 +21,7 @@
#include <linux/sysdev.h>
#include <asm/uv/bios.h>
+#include <asm/uv/uv.h>
struct kobject *sgi_uv_kobj;
@@ -47,6 +48,9 @@
{
unsigned long ret;
+ if (!is_uv_system())
+ return -ENODEV;
+
if (!sgi_uv_kobj)
sgi_uv_kobj = kobject_create_and_add("sgi_uv", firmware_kobj);
if (!sgi_uv_kobj) {
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index d303369..2b3eb82 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -283,7 +283,7 @@
/** vmi clocksource */
static struct clocksource clocksource_vmi;
-static cycle_t read_real_cycles(void)
+static cycle_t read_real_cycles(struct clocksource *cs)
{
cycle_t ret = (cycle_t)vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
return max(ret, clocksource_vmi.cycle_last);
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index e94a11e..ca7ec44 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -273,15 +273,15 @@
* controls the entire thing and the Guest asks it to make changes using the
* LOAD_GDT hypercall.
*
- * This is the opposite of the IDT code where we have a LOAD_IDT_ENTRY
- * hypercall and use that repeatedly to load a new IDT. I don't think it
- * really matters, but wouldn't it be nice if they were the same? Wouldn't
- * it be even better if you were the one to send the patch to fix it?
+ * This is the exactly like the IDT code.
*/
static void lguest_load_gdt(const struct desc_ptr *desc)
{
- BUG_ON((desc->size + 1) / 8 != GDT_ENTRIES);
- kvm_hypercall2(LHCALL_LOAD_GDT, __pa(desc->address), GDT_ENTRIES);
+ unsigned int i;
+ struct desc_struct *gdt = (void *)desc->address;
+
+ for (i = 0; i < (desc->size+1)/8; i++)
+ kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b);
}
/* For a single GDT entry which changes, we do the lazy thing: alter our GDT,
@@ -291,7 +291,9 @@
const void *desc, int type)
{
native_write_gdt_entry(dt, entrynum, desc, type);
- kvm_hypercall2(LHCALL_LOAD_GDT, __pa(dt), GDT_ENTRIES);
+ /* Tell Host about this new entry. */
+ kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, entrynum,
+ dt[entrynum].a, dt[entrynum].b);
}
/* OK, I lied. There are three "thread local storage" GDT entries which change
@@ -661,7 +663,7 @@
/* If we can't use the TSC, the kernel falls back to our lower-priority
* "lguest_clock", where we read the time value given to us by the Host. */
-static cycle_t lguest_clock_read(void)
+static cycle_t lguest_clock_read(struct clocksource *cs)
{
unsigned long sec, nsec;
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 09daebf..8a45093 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -280,15 +280,16 @@
return NULL;
area->phys_addr = phys_addr;
vaddr = (unsigned long) area->addr;
- if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
+
+ if (kernel_map_sync_memtype(phys_addr, size, prot_val)) {
free_memtype(phys_addr, phys_addr + size);
free_vm_area(area);
return NULL;
}
- if (ioremap_change_attr(vaddr, size, prot_val) < 0) {
+ if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
free_memtype(phys_addr, phys_addr + size);
- vunmap(area->addr);
+ free_vm_area(area);
return NULL;
}
@@ -374,7 +375,8 @@
* - UC_MINUS for non-WB-able memory with no other conflicting mappings
* - Inherit from confliting mappings otherwise
*/
- err = reserve_memtype(phys_addr, phys_addr + size, -1, &flags);
+ err = reserve_memtype(phys_addr, phys_addr + size,
+ _PAGE_CACHE_WB, &flags);
if (err < 0)
return NULL;
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index d71e1b6..797f9f1 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -945,71 +945,94 @@
int set_memory_uc(unsigned long addr, int numpages)
{
+ int ret;
+
/*
* for now UC MINUS. see comments in ioremap_nocache()
*/
- if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
- _PAGE_CACHE_UC_MINUS, NULL))
- return -EINVAL;
+ ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
+ _PAGE_CACHE_UC_MINUS, NULL);
+ if (ret)
+ goto out_err;
- return _set_memory_uc(addr, numpages);
+ ret = _set_memory_uc(addr, numpages);
+ if (ret)
+ goto out_free;
+
+ return 0;
+
+out_free:
+ free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+out_err:
+ return ret;
}
EXPORT_SYMBOL(set_memory_uc);
int set_memory_array_uc(unsigned long *addr, int addrinarray)
{
- unsigned long start;
- unsigned long end;
- int i;
+ int i, j;
+ int ret;
+
/*
* for now UC MINUS. see comments in ioremap_nocache()
*/
for (i = 0; i < addrinarray; i++) {
- start = __pa(addr[i]);
- for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
- if (end != __pa(addr[i + 1]))
- break;
- i++;
- }
- if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL))
- goto out;
+ ret = reserve_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE,
+ _PAGE_CACHE_UC_MINUS, NULL);
+ if (ret)
+ goto out_free;
}
- return change_page_attr_set(addr, addrinarray,
+ ret = change_page_attr_set(addr, addrinarray,
__pgprot(_PAGE_CACHE_UC_MINUS), 1);
-out:
- for (i = 0; i < addrinarray; i++) {
- unsigned long tmp = __pa(addr[i]);
+ if (ret)
+ goto out_free;
- if (tmp == start)
- break;
- for (end = tmp + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
- if (end != __pa(addr[i + 1]))
- break;
- i++;
- }
- free_memtype(tmp, end);
- }
- return -EINVAL;
+ return 0;
+
+out_free:
+ for (j = 0; j < i; j++)
+ free_memtype(__pa(addr[j]), __pa(addr[j]) + PAGE_SIZE);
+
+ return ret;
}
EXPORT_SYMBOL(set_memory_array_uc);
int _set_memory_wc(unsigned long addr, int numpages)
{
- return change_page_attr_set(&addr, numpages,
+ int ret;
+ ret = change_page_attr_set(&addr, numpages,
+ __pgprot(_PAGE_CACHE_UC_MINUS), 0);
+
+ if (!ret) {
+ ret = change_page_attr_set(&addr, numpages,
__pgprot(_PAGE_CACHE_WC), 0);
+ }
+ return ret;
}
int set_memory_wc(unsigned long addr, int numpages)
{
+ int ret;
+
if (!pat_enabled)
return set_memory_uc(addr, numpages);
- if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
- _PAGE_CACHE_WC, NULL))
- return -EINVAL;
+ ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
+ _PAGE_CACHE_WC, NULL);
+ if (ret)
+ goto out_err;
- return _set_memory_wc(addr, numpages);
+ ret = _set_memory_wc(addr, numpages);
+ if (ret)
+ goto out_free;
+
+ return 0;
+
+out_free:
+ free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+out_err:
+ return ret;
}
EXPORT_SYMBOL(set_memory_wc);
@@ -1021,29 +1044,31 @@
int set_memory_wb(unsigned long addr, int numpages)
{
- free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+ int ret;
- return _set_memory_wb(addr, numpages);
+ ret = _set_memory_wb(addr, numpages);
+ if (ret)
+ return ret;
+
+ free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+ return 0;
}
EXPORT_SYMBOL(set_memory_wb);
int set_memory_array_wb(unsigned long *addr, int addrinarray)
{
int i;
+ int ret;
- for (i = 0; i < addrinarray; i++) {
- unsigned long start = __pa(addr[i]);
- unsigned long end;
-
- for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
- if (end != __pa(addr[i + 1]))
- break;
- i++;
- }
- free_memtype(start, end);
- }
- return change_page_attr_clear(addr, addrinarray,
+ ret = change_page_attr_clear(addr, addrinarray,
__pgprot(_PAGE_CACHE_MASK), 1);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < addrinarray; i++)
+ free_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE);
+
+ return 0;
}
EXPORT_SYMBOL(set_memory_array_wb);
@@ -1136,6 +1161,8 @@
retval = cpa_clear_pages_array(pages, addrinarray,
__pgprot(_PAGE_CACHE_MASK));
+ if (retval)
+ return retval;
for (i = 0; i < addrinarray; i++) {
start = (unsigned long)page_address(pages[i]);
@@ -1143,7 +1170,7 @@
free_memtype(start, end);
}
- return retval;
+ return 0;
}
EXPORT_SYMBOL(set_pages_array_wb);
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index c009a24..e6718bb 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -182,10 +182,10 @@
u8 mtrr_type;
mtrr_type = mtrr_type_lookup(start, end);
- if (mtrr_type == MTRR_TYPE_UNCACHABLE)
- return _PAGE_CACHE_UC;
- if (mtrr_type == MTRR_TYPE_WRCOMB)
- return _PAGE_CACHE_WC;
+ if (mtrr_type != MTRR_TYPE_WRBACK)
+ return _PAGE_CACHE_UC_MINUS;
+
+ return _PAGE_CACHE_WB;
}
return req_type;
@@ -352,23 +352,13 @@
return 0;
}
- if (req_type == -1) {
- /*
- * Call mtrr_lookup to get the type hint. This is an
- * optimization for /dev/mem mmap'ers into WB memory (BIOS
- * tools and ACPI tools). Use WB request for WB memory and use
- * UC_MINUS otherwise.
- */
- u8 mtrr_type = mtrr_type_lookup(start, end);
-
- if (mtrr_type == MTRR_TYPE_WRBACK)
- actual_type = _PAGE_CACHE_WB;
- else
- actual_type = _PAGE_CACHE_UC_MINUS;
- } else {
- actual_type = pat_x_mtrr_type(start, end,
- req_type & _PAGE_CACHE_MASK);
- }
+ /*
+ * Call mtrr_lookup to get the type hint. This is an
+ * optimization for /dev/mem mmap'ers into WB memory (BIOS
+ * tools and ACPI tools). Use WB request for WB memory and use
+ * UC_MINUS otherwise.
+ */
+ actual_type = pat_x_mtrr_type(start, end, req_type & _PAGE_CACHE_MASK);
if (new_type)
*new_type = actual_type;
@@ -546,9 +536,7 @@
int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t *vma_prot)
{
- u64 offset = ((u64) pfn) << PAGE_SHIFT;
- unsigned long flags = -1;
- int retval;
+ unsigned long flags = _PAGE_CACHE_WB;
if (!range_is_allowed(pfn, size))
return 0;
@@ -576,64 +564,11 @@
}
#endif
- /*
- * With O_SYNC, we can only take UC_MINUS mapping. Fail if we cannot.
- *
- * Without O_SYNC, we want to get
- * - WB for WB-able memory and no other conflicting mappings
- * - UC_MINUS for non-WB-able memory with no other conflicting mappings
- * - Inherit from confliting mappings otherwise
- */
- if (flags != -1) {
- retval = reserve_memtype(offset, offset + size, flags, NULL);
- } else {
- retval = reserve_memtype(offset, offset + size, -1, &flags);
- }
-
- if (retval < 0)
- return 0;
-
- if (((pfn < max_low_pfn_mapped) ||
- (pfn >= (1UL<<(32 - PAGE_SHIFT)) && pfn < max_pfn_mapped)) &&
- ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) {
- free_memtype(offset, offset + size);
- printk(KERN_INFO
- "%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n",
- current->comm, current->pid,
- cattr_name(flags),
- offset, (unsigned long long)(offset + size));
- return 0;
- }
-
*vma_prot = __pgprot((pgprot_val(*vma_prot) & ~_PAGE_CACHE_MASK) |
flags);
return 1;
}
-void map_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
-{
- unsigned long want_flags = (pgprot_val(vma_prot) & _PAGE_CACHE_MASK);
- u64 addr = (u64)pfn << PAGE_SHIFT;
- unsigned long flags;
-
- reserve_memtype(addr, addr + size, want_flags, &flags);
- if (flags != want_flags) {
- printk(KERN_INFO
- "%s:%d /dev/mem expected mapping type %s for %Lx-%Lx, got %s\n",
- current->comm, current->pid,
- cattr_name(want_flags),
- addr, (unsigned long long)(addr + size),
- cattr_name(flags));
- }
-}
-
-void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
-{
- u64 addr = (u64)pfn << PAGE_SHIFT;
-
- free_memtype(addr, addr + size);
-}
-
/*
* Change the memory type for the physial address range in kernel identity
* mapping space if that range is a part of identity map.
@@ -671,8 +606,8 @@
{
int is_ram = 0;
int ret;
- unsigned long flags;
unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
+ unsigned long flags = want_flags;
is_ram = pat_pagerange_is_ram(paddr, paddr + size);
@@ -734,29 +669,28 @@
*
* If the vma has a linear pfn mapping for the entire range, we get the prot
* from pte and reserve the entire vma range with single reserve_pfn_range call.
- * Otherwise, we reserve the entire vma range, my ging through the PTEs page
- * by page to get physical address and protection.
*/
int track_pfn_vma_copy(struct vm_area_struct *vma)
{
- int retval = 0;
- unsigned long i, j;
resource_size_t paddr;
unsigned long prot;
- unsigned long vma_start = vma->vm_start;
- unsigned long vma_end = vma->vm_end;
- unsigned long vma_size = vma_end - vma_start;
+ unsigned long vma_size = vma->vm_end - vma->vm_start;
pgprot_t pgprot;
if (!pat_enabled)
return 0;
+ /*
+ * For now, only handle remap_pfn_range() vmas where
+ * is_linear_pfn_mapping() == TRUE. Handling of
+ * vm_insert_pfn() is TBD.
+ */
if (is_linear_pfn_mapping(vma)) {
/*
* reserve the whole chunk covered by vma. We need the
* starting address and protection from pte.
*/
- if (follow_phys(vma, vma_start, 0, &prot, &paddr)) {
+ if (follow_phys(vma, vma->vm_start, 0, &prot, &paddr)) {
WARN_ON_ONCE(1);
return -EINVAL;
}
@@ -764,28 +698,7 @@
return reserve_pfn_range(paddr, vma_size, &pgprot, 1);
}
- /* reserve entire vma page by page, using pfn and prot from pte */
- for (i = 0; i < vma_size; i += PAGE_SIZE) {
- if (follow_phys(vma, vma_start + i, 0, &prot, &paddr))
- continue;
-
- pgprot = __pgprot(prot);
- retval = reserve_pfn_range(paddr, PAGE_SIZE, &pgprot, 1);
- if (retval)
- goto cleanup_ret;
- }
return 0;
-
-cleanup_ret:
- /* Reserve error: Cleanup partial reservation and return error */
- for (j = 0; j < i; j += PAGE_SIZE) {
- if (follow_phys(vma, vma_start + j, 0, &prot, &paddr))
- continue;
-
- free_pfn_range(paddr, PAGE_SIZE);
- }
-
- return retval;
}
/*
@@ -795,50 +708,28 @@
* prot is passed in as a parameter for the new mapping. If the vma has a
* linear pfn mapping for the entire range reserve the entire vma range with
* single reserve_pfn_range call.
- * Otherwise, we look t the pfn and size and reserve only the specified range
- * page by page.
- *
- * Note that this function can be called with caller trying to map only a
- * subrange/page inside the vma.
*/
int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
unsigned long pfn, unsigned long size)
{
- int retval = 0;
- unsigned long i, j;
- resource_size_t base_paddr;
resource_size_t paddr;
- unsigned long vma_start = vma->vm_start;
- unsigned long vma_end = vma->vm_end;
- unsigned long vma_size = vma_end - vma_start;
+ unsigned long vma_size = vma->vm_end - vma->vm_start;
if (!pat_enabled)
return 0;
+ /*
+ * For now, only handle remap_pfn_range() vmas where
+ * is_linear_pfn_mapping() == TRUE. Handling of
+ * vm_insert_pfn() is TBD.
+ */
if (is_linear_pfn_mapping(vma)) {
/* reserve the whole chunk starting from vm_pgoff */
paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
return reserve_pfn_range(paddr, vma_size, prot, 0);
}
- /* reserve page by page using pfn and size */
- base_paddr = (resource_size_t)pfn << PAGE_SHIFT;
- for (i = 0; i < size; i += PAGE_SIZE) {
- paddr = base_paddr + i;
- retval = reserve_pfn_range(paddr, PAGE_SIZE, prot, 0);
- if (retval)
- goto cleanup_ret;
- }
return 0;
-
-cleanup_ret:
- /* Reserve error: Cleanup partial reservation and return error */
- for (j = 0; j < i; j += PAGE_SIZE) {
- paddr = base_paddr + j;
- free_pfn_range(paddr, PAGE_SIZE);
- }
-
- return retval;
}
/*
@@ -849,39 +740,23 @@
void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
unsigned long size)
{
- unsigned long i;
resource_size_t paddr;
- unsigned long prot;
- unsigned long vma_start = vma->vm_start;
- unsigned long vma_end = vma->vm_end;
- unsigned long vma_size = vma_end - vma_start;
+ unsigned long vma_size = vma->vm_end - vma->vm_start;
if (!pat_enabled)
return;
+ /*
+ * For now, only handle remap_pfn_range() vmas where
+ * is_linear_pfn_mapping() == TRUE. Handling of
+ * vm_insert_pfn() is TBD.
+ */
if (is_linear_pfn_mapping(vma)) {
/* free the whole chunk starting from vm_pgoff */
paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
free_pfn_range(paddr, vma_size);
return;
}
-
- if (size != 0 && size != vma_size) {
- /* free page by page, using pfn and size */
- paddr = (resource_size_t)pfn << PAGE_SHIFT;
- for (i = 0; i < size; i += PAGE_SIZE) {
- paddr = paddr + i;
- free_pfn_range(paddr, PAGE_SIZE);
- }
- } else {
- /* free entire vma, page by page, using the pfn from pte */
- for (i = 0; i < vma_size; i += PAGE_SIZE) {
- if (follow_phys(vma, vma_start + i, 0, &prot, &paddr))
- continue;
-
- free_pfn_range(paddr, PAGE_SIZE);
- }
- }
}
pgprot_t pgprot_writecombine(pgprot_t prot)
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 82cd39a..f09e8c3 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -42,6 +42,7 @@
#include <asm/xen/hypervisor.h>
#include <asm/fixmap.h>
#include <asm/processor.h>
+#include <asm/proto.h>
#include <asm/msr-index.h>
#include <asm/setup.h>
#include <asm/desc.h>
@@ -168,21 +169,23 @@
xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
}
+static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0;
+static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0;
+
static void xen_cpuid(unsigned int *ax, unsigned int *bx,
unsigned int *cx, unsigned int *dx)
{
+ unsigned maskecx = ~0;
unsigned maskedx = ~0;
/*
* Mask out inconvenient features, to try and disable as many
* unsupported kernel subsystems as possible.
*/
- if (*ax == 1)
- maskedx = ~((1 << X86_FEATURE_APIC) | /* disable APIC */
- (1 << X86_FEATURE_ACPI) | /* disable ACPI */
- (1 << X86_FEATURE_MCE) | /* disable MCE */
- (1 << X86_FEATURE_MCA) | /* disable MCA */
- (1 << X86_FEATURE_ACC)); /* thermal monitoring */
+ if (*ax == 1) {
+ maskecx = cpuid_leaf1_ecx_mask;
+ maskedx = cpuid_leaf1_edx_mask;
+ }
asm(XEN_EMULATE_PREFIX "cpuid"
: "=a" (*ax),
@@ -190,9 +193,43 @@
"=c" (*cx),
"=d" (*dx)
: "0" (*ax), "2" (*cx));
+
+ *cx &= maskecx;
*dx &= maskedx;
}
+static __init void xen_init_cpuid_mask(void)
+{
+ unsigned int ax, bx, cx, dx;
+
+ cpuid_leaf1_edx_mask =
+ ~((1 << X86_FEATURE_MCE) | /* disable MCE */
+ (1 << X86_FEATURE_MCA) | /* disable MCA */
+ (1 << X86_FEATURE_ACC)); /* thermal monitoring */
+
+ if (!xen_initial_domain())
+ cpuid_leaf1_edx_mask &=
+ ~((1 << X86_FEATURE_APIC) | /* disable local APIC */
+ (1 << X86_FEATURE_ACPI)); /* disable ACPI */
+
+ ax = 1;
+ xen_cpuid(&ax, &bx, &cx, &dx);
+
+ /* cpuid claims we support xsave; try enabling it to see what happens */
+ if (cx & (1 << (X86_FEATURE_XSAVE % 32))) {
+ unsigned long cr4;
+
+ set_in_cr4(X86_CR4_OSXSAVE);
+
+ cr4 = read_cr4();
+
+ if ((cr4 & X86_CR4_OSXSAVE) == 0)
+ cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_XSAVE % 32));
+
+ clear_in_cr4(X86_CR4_OSXSAVE);
+ }
+}
+
static void xen_set_debugreg(int reg, unsigned long val)
{
HYPERVISOR_set_debugreg(reg, val);
@@ -284,12 +321,11 @@
static void xen_load_gdt(const struct desc_ptr *dtr)
{
- unsigned long *frames;
unsigned long va = dtr->address;
unsigned int size = dtr->size + 1;
unsigned pages = (size + PAGE_SIZE - 1) / PAGE_SIZE;
+ unsigned long frames[pages];
int f;
- struct multicall_space mcs;
/* A GDT can be up to 64k in size, which corresponds to 8192
8-byte entries, or 16 4k pages.. */
@@ -297,19 +333,26 @@
BUG_ON(size > 65536);
BUG_ON(va & ~PAGE_MASK);
- mcs = xen_mc_entry(sizeof(*frames) * pages);
- frames = mcs.args;
-
for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
- frames[f] = arbitrary_virt_to_mfn((void *)va);
+ int level;
+ pte_t *ptep = lookup_address(va, &level);
+ unsigned long pfn, mfn;
+ void *virt;
+
+ BUG_ON(ptep == NULL);
+
+ pfn = pte_pfn(*ptep);
+ mfn = pfn_to_mfn(pfn);
+ virt = __va(PFN_PHYS(pfn));
+
+ frames[f] = mfn;
make_lowmem_page_readonly((void *)va);
- make_lowmem_page_readonly(mfn_to_virt(frames[f]));
+ make_lowmem_page_readonly(virt);
}
- MULTI_set_gdt(mcs.mc, frames, size / sizeof(struct desc_struct));
-
- xen_mc_issue(PARAVIRT_LAZY_CPU);
+ if (HYPERVISOR_set_gdt(frames, size / sizeof(struct desc_struct)))
+ BUG();
}
static void load_TLS_descriptor(struct thread_struct *t,
@@ -385,7 +428,7 @@
static int cvt_gate_to_trap(int vector, const gate_desc *val,
struct trap_info *info)
{
- if (val->type != 0xf && val->type != 0xe)
+ if (val->type != GATE_TRAP && val->type != GATE_INTERRUPT)
return 0;
info->vector = vector;
@@ -393,8 +436,8 @@
info->cs = gate_segment(*val);
info->flags = val->dpl;
/* interrupt gates clear IF */
- if (val->type == 0xe)
- info->flags |= 4;
+ if (val->type == GATE_INTERRUPT)
+ info->flags |= 1 << 2;
return 1;
}
@@ -872,7 +915,6 @@
.emergency_restart = xen_emergency_restart,
};
-
/* First C function to be called on Xen boot */
asmlinkage void __init xen_start_kernel(void)
{
@@ -897,6 +939,8 @@
xen_init_irq_ops();
+ xen_init_cpuid_mask();
+
#ifdef CONFIG_X86_LOCAL_APIC
/*
* set up the basic apic ops.
@@ -938,6 +982,11 @@
if (!xen_initial_domain())
__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
+#ifdef CONFIG_X86_64
+ /* Work out if we support NX */
+ check_efer();
+#endif
+
/* Don't do the full vcpu_info placement stuff until we have a
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 2a81838..9842b12 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -184,7 +184,7 @@
}
/* Build the parallel p2m_top_mfn structures */
-void xen_setup_mfn_list_list(void)
+static void __init xen_build_mfn_list_list(void)
{
unsigned pfn, idx;
@@ -198,7 +198,10 @@
unsigned topidx = idx * P2M_ENTRIES_PER_PAGE;
p2m_top_mfn_list[idx] = virt_to_mfn(&p2m_top_mfn[topidx]);
}
+}
+void xen_setup_mfn_list_list(void)
+{
BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info);
HYPERVISOR_shared_info->arch.pfn_to_mfn_frame_list_list =
@@ -218,6 +221,8 @@
p2m_top[topidx] = &mfn_list[pfn];
}
+
+ xen_build_mfn_list_list();
}
unsigned long get_phys_to_machine(unsigned long pfn)
@@ -233,47 +238,74 @@
}
EXPORT_SYMBOL_GPL(get_phys_to_machine);
-static void alloc_p2m(unsigned long **pp, unsigned long *mfnp)
+/* install a new p2m_top page */
+bool install_p2mtop_page(unsigned long pfn, unsigned long *p)
{
- unsigned long *p;
+ unsigned topidx = p2m_top_index(pfn);
+ unsigned long **pfnp, *mfnp;
unsigned i;
- p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL);
- BUG_ON(p == NULL);
+ pfnp = &p2m_top[topidx];
+ mfnp = &p2m_top_mfn[topidx];
for (i = 0; i < P2M_ENTRIES_PER_PAGE; i++)
p[i] = INVALID_P2M_ENTRY;
- if (cmpxchg(pp, p2m_missing, p) != p2m_missing)
- free_page((unsigned long)p);
- else
+ if (cmpxchg(pfnp, p2m_missing, p) == p2m_missing) {
*mfnp = virt_to_mfn(p);
+ return true;
+ }
+
+ return false;
+}
+
+static void alloc_p2m(unsigned long pfn)
+{
+ unsigned long *p;
+
+ p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL);
+ BUG_ON(p == NULL);
+
+ if (!install_p2mtop_page(pfn, p))
+ free_page((unsigned long)p);
+}
+
+/* Try to install p2m mapping; fail if intermediate bits missing */
+bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+ unsigned topidx, idx;
+
+ if (unlikely(pfn >= MAX_DOMAIN_PAGES)) {
+ BUG_ON(mfn != INVALID_P2M_ENTRY);
+ return true;
+ }
+
+ topidx = p2m_top_index(pfn);
+ if (p2m_top[topidx] == p2m_missing) {
+ if (mfn == INVALID_P2M_ENTRY)
+ return true;
+ return false;
+ }
+
+ idx = p2m_index(pfn);
+ p2m_top[topidx][idx] = mfn;
+
+ return true;
}
void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
{
- unsigned topidx, idx;
-
if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) {
BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
return;
}
- if (unlikely(pfn >= MAX_DOMAIN_PAGES)) {
- BUG_ON(mfn != INVALID_P2M_ENTRY);
- return;
- }
+ if (unlikely(!__set_phys_to_machine(pfn, mfn))) {
+ alloc_p2m(pfn);
- topidx = p2m_top_index(pfn);
- if (p2m_top[topidx] == p2m_missing) {
- /* no need to allocate a page to store an invalid entry */
- if (mfn == INVALID_P2M_ENTRY)
- return;
- alloc_p2m(&p2m_top[topidx], &p2m_top_mfn[topidx]);
+ if (!__set_phys_to_machine(pfn, mfn))
+ BUG();
}
-
- idx = p2m_index(pfn);
- p2m_top[topidx][idx] = mfn;
}
unsigned long arbitrary_virt_to_mfn(void *vaddr)
@@ -987,7 +1019,7 @@
return 0;
}
-void __init xen_mark_init_mm_pinned(void)
+static void __init xen_mark_init_mm_pinned(void)
{
xen_pgd_walk(&init_mm, xen_mark_pinned, FIXADDR_TOP);
}
@@ -1270,8 +1302,8 @@
} *args;
struct multicall_space mcs;
- BUG_ON(cpumask_empty(cpus));
- BUG_ON(!mm);
+ if (cpumask_empty(cpus))
+ return; /* nothing to do */
mcs = xen_mc_entry(sizeof(*args));
args = mcs.args;
@@ -1438,6 +1470,15 @@
}
#endif
+static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
+{
+ struct mmuext_op op;
+ op.cmd = cmd;
+ op.arg1.mfn = pfn_to_mfn(pfn);
+ if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
+ BUG();
+}
+
/* Early in boot, while setting up the initial pagetable, assume
everything is pinned. */
static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
@@ -1446,22 +1487,29 @@
BUG_ON(mem_map); /* should only be used early */
#endif
make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
+ pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn);
+}
+
+/* Used for pmd and pud */
+static __init void xen_alloc_pmd_init(struct mm_struct *mm, unsigned long pfn)
+{
+#ifdef CONFIG_FLATMEM
+ BUG_ON(mem_map); /* should only be used early */
+#endif
+ make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
}
/* Early release_pte assumes that all pts are pinned, since there's
only init_mm and anything attached to that is pinned. */
-static void xen_release_pte_init(unsigned long pfn)
+static __init void xen_release_pte_init(unsigned long pfn)
{
+ pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
}
-static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
+static __init void xen_release_pmd_init(unsigned long pfn)
{
- struct mmuext_op op;
- op.cmd = cmd;
- op.arg1.mfn = pfn_to_mfn(pfn);
- if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
- BUG();
+ make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
}
/* This needs to make sure the new pte page is pinned iff its being
@@ -1773,6 +1821,9 @@
#ifdef CONFIG_X86_LOCAL_APIC
case FIX_APIC_BASE: /* maps dummy local APIC */
#endif
+ case FIX_TEXT_POKE0:
+ case FIX_TEXT_POKE1:
+ /* All local page mappings */
pte = pfn_pte(phys, prot);
break;
@@ -1819,7 +1870,6 @@
xen_mark_init_mm_pinned();
}
-
const struct pv_mmu_ops xen_mmu_ops __initdata = {
.pagetable_setup_start = xen_pagetable_setup_start,
.pagetable_setup_done = xen_pagetable_setup_done,
@@ -1843,9 +1893,9 @@
.alloc_pte = xen_alloc_pte_init,
.release_pte = xen_release_pte_init,
- .alloc_pmd = xen_alloc_pte_init,
+ .alloc_pmd = xen_alloc_pmd_init,
.alloc_pmd_clone = paravirt_nop,
- .release_pmd = xen_release_pte_init,
+ .release_pmd = xen_release_pmd_init,
#ifdef CONFIG_HIGHPTE
.kmap_atomic_pte = xen_kmap_atomic_pte,
@@ -1883,8 +1933,8 @@
.make_pud = PV_CALLEE_SAVE(xen_make_pud),
.set_pgd = xen_set_pgd_hyper,
- .alloc_pud = xen_alloc_pte_init,
- .release_pud = xen_release_pte_init,
+ .alloc_pud = xen_alloc_pmd_init,
+ .release_pud = xen_release_pmd_init,
#endif /* PAGETABLE_LEVELS == 4 */
.activate_mm = xen_activate_mm,
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index 24d1b44..da73026 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -11,6 +11,9 @@
};
+bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn);
+bool install_p2mtop_page(unsigned long pfn, unsigned long *p);
+
void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 585a6e3..429834e 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -317,7 +317,7 @@
BUG_ON(rc);
while(per_cpu(cpu_state, cpu) != CPU_ONLINE) {
- HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+ HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
barrier();
}
@@ -422,7 +422,7 @@
/* Make sure other vcpus get a chance to run if they need to. */
for_each_cpu(cpu, mask) {
if (xen_vcpu_stolen(cpu)) {
- HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+ HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
break;
}
}
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 14f2406..0a5aa44 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -213,6 +213,11 @@
return ret;
}
+static cycle_t xen_clocksource_get_cycles(struct clocksource *cs)
+{
+ return xen_clocksource_read();
+}
+
static void xen_read_wallclock(struct timespec *ts)
{
struct shared_info *s = HYPERVISOR_shared_info;
@@ -241,7 +246,7 @@
static struct clocksource xen_clocksource __read_mostly = {
.name = "xen",
.rating = 400,
- .read = xen_clocksource_read,
+ .read = xen_clocksource_get_cycles,
.mask = ~0,
.mult = 1<<XEN_SHIFT, /* time directly in nanoseconds */
.shift = XEN_SHIFT,
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 2f5ef26..2013946 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -57,8 +57,6 @@
bool xen_vcpu_stolen(int vcpu);
-void xen_mark_init_mm_pinned(void);
-
void xen_setup_vcpu_info_placement(void);
#ifdef CONFIG_SMP
diff --git a/block/as-iosched.c b/block/as-iosched.c
index 631f6f4..c48fa67 100644
--- a/block/as-iosched.c
+++ b/block/as-iosched.c
@@ -17,9 +17,6 @@
#include <linux/rbtree.h>
#include <linux/interrupt.h>
-#define REQ_SYNC 1
-#define REQ_ASYNC 0
-
/*
* See Documentation/block/as-iosched.txt
*/
@@ -93,7 +90,7 @@
struct list_head fifo_list[2];
struct request *next_rq[2]; /* next in sort order */
- sector_t last_sector[2]; /* last REQ_SYNC & REQ_ASYNC sectors */
+ sector_t last_sector[2]; /* last SYNC & ASYNC sectors */
unsigned long exit_prob; /* probability a task will exit while
being waited on */
@@ -109,7 +106,7 @@
unsigned long last_check_fifo[2];
int changed_batch; /* 1: waiting for old batch to end */
int new_batch; /* 1: waiting on first read complete */
- int batch_data_dir; /* current batch REQ_SYNC / REQ_ASYNC */
+ int batch_data_dir; /* current batch SYNC / ASYNC */
int write_batch_count; /* max # of reqs in a write batch */
int current_write_count; /* how many requests left this batch */
int write_batch_idled; /* has the write batch gone idle? */
@@ -554,7 +551,7 @@
if (aic == NULL)
return;
- if (data_dir == REQ_SYNC) {
+ if (data_dir == BLK_RW_SYNC) {
unsigned long in_flight = atomic_read(&aic->nr_queued)
+ atomic_read(&aic->nr_dispatched);
spin_lock(&aic->lock);
@@ -811,7 +808,7 @@
*/
static void update_write_batch(struct as_data *ad)
{
- unsigned long batch = ad->batch_expire[REQ_ASYNC];
+ unsigned long batch = ad->batch_expire[BLK_RW_ASYNC];
long write_time;
write_time = (jiffies - ad->current_batch_expires) + batch;
@@ -855,7 +852,7 @@
kblockd_schedule_work(q, &ad->antic_work);
ad->changed_batch = 0;
- if (ad->batch_data_dir == REQ_SYNC)
+ if (ad->batch_data_dir == BLK_RW_SYNC)
ad->new_batch = 1;
}
WARN_ON(ad->nr_dispatched == 0);
@@ -869,7 +866,7 @@
if (ad->new_batch && ad->batch_data_dir == rq_is_sync(rq)) {
update_write_batch(ad);
ad->current_batch_expires = jiffies +
- ad->batch_expire[REQ_SYNC];
+ ad->batch_expire[BLK_RW_SYNC];
ad->new_batch = 0;
}
@@ -960,7 +957,7 @@
if (ad->changed_batch || ad->new_batch)
return 0;
- if (ad->batch_data_dir == REQ_SYNC)
+ if (ad->batch_data_dir == BLK_RW_SYNC)
/* TODO! add a check so a complete fifo gets written? */
return time_after(jiffies, ad->current_batch_expires);
@@ -986,7 +983,7 @@
*/
ad->last_sector[data_dir] = rq->sector + rq->nr_sectors;
- if (data_dir == REQ_SYNC) {
+ if (data_dir == BLK_RW_SYNC) {
struct io_context *ioc = RQ_IOC(rq);
/* In case we have to anticipate after this */
copy_io_context(&ad->io_context, &ioc);
@@ -1025,41 +1022,41 @@
static int as_dispatch_request(struct request_queue *q, int force)
{
struct as_data *ad = q->elevator->elevator_data;
- const int reads = !list_empty(&ad->fifo_list[REQ_SYNC]);
- const int writes = !list_empty(&ad->fifo_list[REQ_ASYNC]);
+ const int reads = !list_empty(&ad->fifo_list[BLK_RW_SYNC]);
+ const int writes = !list_empty(&ad->fifo_list[BLK_RW_ASYNC]);
struct request *rq;
if (unlikely(force)) {
/*
* Forced dispatch, accounting is useless. Reset
* accounting states and dump fifo_lists. Note that
- * batch_data_dir is reset to REQ_SYNC to avoid
+ * batch_data_dir is reset to BLK_RW_SYNC to avoid
* screwing write batch accounting as write batch
* accounting occurs on W->R transition.
*/
int dispatched = 0;
- ad->batch_data_dir = REQ_SYNC;
+ ad->batch_data_dir = BLK_RW_SYNC;
ad->changed_batch = 0;
ad->new_batch = 0;
- while (ad->next_rq[REQ_SYNC]) {
- as_move_to_dispatch(ad, ad->next_rq[REQ_SYNC]);
+ while (ad->next_rq[BLK_RW_SYNC]) {
+ as_move_to_dispatch(ad, ad->next_rq[BLK_RW_SYNC]);
dispatched++;
}
- ad->last_check_fifo[REQ_SYNC] = jiffies;
+ ad->last_check_fifo[BLK_RW_SYNC] = jiffies;
- while (ad->next_rq[REQ_ASYNC]) {
- as_move_to_dispatch(ad, ad->next_rq[REQ_ASYNC]);
+ while (ad->next_rq[BLK_RW_ASYNC]) {
+ as_move_to_dispatch(ad, ad->next_rq[BLK_RW_ASYNC]);
dispatched++;
}
- ad->last_check_fifo[REQ_ASYNC] = jiffies;
+ ad->last_check_fifo[BLK_RW_ASYNC] = jiffies;
return dispatched;
}
/* Signal that the write batch was uncontended, so we can't time it */
- if (ad->batch_data_dir == REQ_ASYNC && !reads) {
+ if (ad->batch_data_dir == BLK_RW_ASYNC && !reads) {
if (ad->current_write_count == 0 || !writes)
ad->write_batch_idled = 1;
}
@@ -1076,8 +1073,8 @@
*/
rq = ad->next_rq[ad->batch_data_dir];
- if (ad->batch_data_dir == REQ_SYNC && ad->antic_expire) {
- if (as_fifo_expired(ad, REQ_SYNC))
+ if (ad->batch_data_dir == BLK_RW_SYNC && ad->antic_expire) {
+ if (as_fifo_expired(ad, BLK_RW_SYNC))
goto fifo_expired;
if (as_can_anticipate(ad, rq)) {
@@ -1090,7 +1087,7 @@
/* we have a "next request" */
if (reads && !writes)
ad->current_batch_expires =
- jiffies + ad->batch_expire[REQ_SYNC];
+ jiffies + ad->batch_expire[BLK_RW_SYNC];
goto dispatch_request;
}
}
@@ -1101,20 +1098,20 @@
*/
if (reads) {
- BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[REQ_SYNC]));
+ BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[BLK_RW_SYNC]));
- if (writes && ad->batch_data_dir == REQ_SYNC)
+ if (writes && ad->batch_data_dir == BLK_RW_SYNC)
/*
* Last batch was a read, switch to writes
*/
goto dispatch_writes;
- if (ad->batch_data_dir == REQ_ASYNC) {
+ if (ad->batch_data_dir == BLK_RW_ASYNC) {
WARN_ON(ad->new_batch);
ad->changed_batch = 1;
}
- ad->batch_data_dir = REQ_SYNC;
- rq = rq_entry_fifo(ad->fifo_list[REQ_SYNC].next);
+ ad->batch_data_dir = BLK_RW_SYNC;
+ rq = rq_entry_fifo(ad->fifo_list[BLK_RW_SYNC].next);
ad->last_check_fifo[ad->batch_data_dir] = jiffies;
goto dispatch_request;
}
@@ -1125,9 +1122,9 @@
if (writes) {
dispatch_writes:
- BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[REQ_ASYNC]));
+ BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[BLK_RW_ASYNC]));
- if (ad->batch_data_dir == REQ_SYNC) {
+ if (ad->batch_data_dir == BLK_RW_SYNC) {
ad->changed_batch = 1;
/*
@@ -1137,11 +1134,11 @@
*/
ad->new_batch = 0;
}
- ad->batch_data_dir = REQ_ASYNC;
+ ad->batch_data_dir = BLK_RW_ASYNC;
ad->current_write_count = ad->write_batch_count;
ad->write_batch_idled = 0;
- rq = rq_entry_fifo(ad->fifo_list[REQ_ASYNC].next);
- ad->last_check_fifo[REQ_ASYNC] = jiffies;
+ rq = rq_entry_fifo(ad->fifo_list[BLK_RW_ASYNC].next);
+ ad->last_check_fifo[BLK_RW_ASYNC] = jiffies;
goto dispatch_request;
}
@@ -1164,9 +1161,9 @@
if (ad->nr_dispatched)
return 0;
- if (ad->batch_data_dir == REQ_ASYNC)
+ if (ad->batch_data_dir == BLK_RW_ASYNC)
ad->current_batch_expires = jiffies +
- ad->batch_expire[REQ_ASYNC];
+ ad->batch_expire[BLK_RW_ASYNC];
else
ad->new_batch = 1;
@@ -1238,8 +1235,8 @@
{
struct as_data *ad = q->elevator->elevator_data;
- return list_empty(&ad->fifo_list[REQ_ASYNC])
- && list_empty(&ad->fifo_list[REQ_SYNC]);
+ return list_empty(&ad->fifo_list[BLK_RW_ASYNC])
+ && list_empty(&ad->fifo_list[BLK_RW_SYNC]);
}
static int
@@ -1346,8 +1343,8 @@
del_timer_sync(&ad->antic_timer);
cancel_work_sync(&ad->antic_work);
- BUG_ON(!list_empty(&ad->fifo_list[REQ_SYNC]));
- BUG_ON(!list_empty(&ad->fifo_list[REQ_ASYNC]));
+ BUG_ON(!list_empty(&ad->fifo_list[BLK_RW_SYNC]));
+ BUG_ON(!list_empty(&ad->fifo_list[BLK_RW_ASYNC]));
put_io_context(ad->io_context);
kfree(ad);
@@ -1372,18 +1369,18 @@
init_timer(&ad->antic_timer);
INIT_WORK(&ad->antic_work, as_work_handler);
- INIT_LIST_HEAD(&ad->fifo_list[REQ_SYNC]);
- INIT_LIST_HEAD(&ad->fifo_list[REQ_ASYNC]);
- ad->sort_list[REQ_SYNC] = RB_ROOT;
- ad->sort_list[REQ_ASYNC] = RB_ROOT;
- ad->fifo_expire[REQ_SYNC] = default_read_expire;
- ad->fifo_expire[REQ_ASYNC] = default_write_expire;
+ INIT_LIST_HEAD(&ad->fifo_list[BLK_RW_SYNC]);
+ INIT_LIST_HEAD(&ad->fifo_list[BLK_RW_ASYNC]);
+ ad->sort_list[BLK_RW_SYNC] = RB_ROOT;
+ ad->sort_list[BLK_RW_ASYNC] = RB_ROOT;
+ ad->fifo_expire[BLK_RW_SYNC] = default_read_expire;
+ ad->fifo_expire[BLK_RW_ASYNC] = default_write_expire;
ad->antic_expire = default_antic_expire;
- ad->batch_expire[REQ_SYNC] = default_read_batch_expire;
- ad->batch_expire[REQ_ASYNC] = default_write_batch_expire;
+ ad->batch_expire[BLK_RW_SYNC] = default_read_batch_expire;
+ ad->batch_expire[BLK_RW_ASYNC] = default_write_batch_expire;
- ad->current_batch_expires = jiffies + ad->batch_expire[REQ_SYNC];
- ad->write_batch_count = ad->batch_expire[REQ_ASYNC] / 10;
+ ad->current_batch_expires = jiffies + ad->batch_expire[BLK_RW_SYNC];
+ ad->write_batch_count = ad->batch_expire[BLK_RW_ASYNC] / 10;
if (ad->write_batch_count < 2)
ad->write_batch_count = 2;
@@ -1432,11 +1429,11 @@
struct as_data *ad = e->elevator_data; \
return as_var_show(jiffies_to_msecs((__VAR)), (page)); \
}
-SHOW_FUNCTION(as_read_expire_show, ad->fifo_expire[REQ_SYNC]);
-SHOW_FUNCTION(as_write_expire_show, ad->fifo_expire[REQ_ASYNC]);
+SHOW_FUNCTION(as_read_expire_show, ad->fifo_expire[BLK_RW_SYNC]);
+SHOW_FUNCTION(as_write_expire_show, ad->fifo_expire[BLK_RW_ASYNC]);
SHOW_FUNCTION(as_antic_expire_show, ad->antic_expire);
-SHOW_FUNCTION(as_read_batch_expire_show, ad->batch_expire[REQ_SYNC]);
-SHOW_FUNCTION(as_write_batch_expire_show, ad->batch_expire[REQ_ASYNC]);
+SHOW_FUNCTION(as_read_batch_expire_show, ad->batch_expire[BLK_RW_SYNC]);
+SHOW_FUNCTION(as_write_batch_expire_show, ad->batch_expire[BLK_RW_ASYNC]);
#undef SHOW_FUNCTION
#define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX) \
@@ -1451,13 +1448,14 @@
*(__PTR) = msecs_to_jiffies(*(__PTR)); \
return ret; \
}
-STORE_FUNCTION(as_read_expire_store, &ad->fifo_expire[REQ_SYNC], 0, INT_MAX);
-STORE_FUNCTION(as_write_expire_store, &ad->fifo_expire[REQ_ASYNC], 0, INT_MAX);
+STORE_FUNCTION(as_read_expire_store, &ad->fifo_expire[BLK_RW_SYNC], 0, INT_MAX);
+STORE_FUNCTION(as_write_expire_store,
+ &ad->fifo_expire[BLK_RW_ASYNC], 0, INT_MAX);
STORE_FUNCTION(as_antic_expire_store, &ad->antic_expire, 0, INT_MAX);
STORE_FUNCTION(as_read_batch_expire_store,
- &ad->batch_expire[REQ_SYNC], 0, INT_MAX);
+ &ad->batch_expire[BLK_RW_SYNC], 0, INT_MAX);
STORE_FUNCTION(as_write_batch_expire_store,
- &ad->batch_expire[REQ_ASYNC], 0, INT_MAX);
+ &ad->batch_expire[BLK_RW_ASYNC], 0, INT_MAX);
#undef STORE_FUNCTION
#define AS_ATTR(name) \
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index f7dae57..20b4111 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -319,9 +319,6 @@
return -ENXIO;
bio = bio_alloc(GFP_KERNEL, 0);
- if (!bio)
- return -ENOMEM;
-
bio->bi_end_io = bio_end_empty_barrier;
bio->bi_private = &wait;
bio->bi_bdev = bdev;
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 73f36be..cac4e9f 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -209,14 +209,14 @@
ssize_t ret = queue_var_store(&stats, page, count);
spin_lock_irq(q->queue_lock);
- elv_quisce_start(q);
+ elv_quiesce_start(q);
if (stats)
queue_flag_set(QUEUE_FLAG_IO_STAT, q);
else
queue_flag_clear(QUEUE_FLAG_IO_STAT, q);
- elv_quisce_end(q);
+ elv_quiesce_end(q);
spin_unlock_irq(q->queue_lock);
return ret;
diff --git a/block/blk.h b/block/blk.h
index 24fcaee..5dfc412 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -70,8 +70,8 @@
int blk_dev_init(void);
-void elv_quisce_start(struct request_queue *q);
-void elv_quisce_end(struct request_queue *q);
+void elv_quiesce_start(struct request_queue *q);
+void elv_quiesce_end(struct request_queue *q);
/*
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index a4809de..0d3b70d 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -56,9 +56,6 @@
#define cfq_class_idle(cfqq) ((cfqq)->ioprio_class == IOPRIO_CLASS_IDLE)
#define cfq_class_rt(cfqq) ((cfqq)->ioprio_class == IOPRIO_CLASS_RT)
-#define ASYNC (0)
-#define SYNC (1)
-
#define sample_valid(samples) ((samples) > 80)
/*
@@ -83,6 +80,14 @@
* rr list of queues with requests and the count of them
*/
struct cfq_rb_root service_tree;
+
+ /*
+ * Each priority tree is sorted by next_request position. These
+ * trees are used when determining if two or more queues are
+ * interleaving requests (see cfq_close_cooperator).
+ */
+ struct rb_root prio_trees[CFQ_PRIO_LISTS];
+
unsigned int busy_queues;
/*
* Used to track any pending rt requests so we can pre-empt current
@@ -147,6 +152,8 @@
struct rb_node rb_node;
/* service_tree key */
unsigned long rb_key;
+ /* prio tree member */
+ struct rb_node p_node;
/* sorted list of pending requests */
struct rb_root sort_list;
/* if fifo isn't expired, next request to serve */
@@ -185,6 +192,7 @@
CFQ_CFQQ_FLAG_prio_changed, /* task priority has changed */
CFQ_CFQQ_FLAG_slice_new, /* no requests dispatched in slice */
CFQ_CFQQ_FLAG_sync, /* synchronous queue */
+ CFQ_CFQQ_FLAG_coop, /* has done a coop jump of the queue */
};
#define CFQ_CFQQ_FNS(name) \
@@ -211,6 +219,7 @@
CFQ_CFQQ_FNS(prio_changed);
CFQ_CFQQ_FNS(slice_new);
CFQ_CFQQ_FNS(sync);
+CFQ_CFQQ_FNS(coop);
#undef CFQ_CFQQ_FNS
#define cfq_log_cfqq(cfqd, cfqq, fmt, args...) \
@@ -419,13 +428,17 @@
return NULL;
}
+static void rb_erase_init(struct rb_node *n, struct rb_root *root)
+{
+ rb_erase(n, root);
+ RB_CLEAR_NODE(n);
+}
+
static void cfq_rb_erase(struct rb_node *n, struct cfq_rb_root *root)
{
if (root->left == n)
root->left = NULL;
-
- rb_erase(n, &root->rb);
- RB_CLEAR_NODE(n);
+ rb_erase_init(n, &root->rb);
}
/*
@@ -470,8 +483,8 @@
* requests waiting to be processed. It is sorted in the order that
* we will service the queues.
*/
-static void cfq_service_tree_add(struct cfq_data *cfqd,
- struct cfq_queue *cfqq, int add_front)
+static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq,
+ int add_front)
{
struct rb_node **p, *parent;
struct cfq_queue *__cfqq;
@@ -544,6 +557,63 @@
rb_insert_color(&cfqq->rb_node, &cfqd->service_tree.rb);
}
+static struct cfq_queue *
+cfq_prio_tree_lookup(struct cfq_data *cfqd, int ioprio, sector_t sector,
+ struct rb_node **ret_parent, struct rb_node ***rb_link)
+{
+ struct rb_root *root = &cfqd->prio_trees[ioprio];
+ struct rb_node **p, *parent;
+ struct cfq_queue *cfqq = NULL;
+
+ parent = NULL;
+ p = &root->rb_node;
+ while (*p) {
+ struct rb_node **n;
+
+ parent = *p;
+ cfqq = rb_entry(parent, struct cfq_queue, p_node);
+
+ /*
+ * Sort strictly based on sector. Smallest to the left,
+ * largest to the right.
+ */
+ if (sector > cfqq->next_rq->sector)
+ n = &(*p)->rb_right;
+ else if (sector < cfqq->next_rq->sector)
+ n = &(*p)->rb_left;
+ else
+ break;
+ p = n;
+ }
+
+ *ret_parent = parent;
+ if (rb_link)
+ *rb_link = p;
+ return NULL;
+}
+
+static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+{
+ struct rb_root *root = &cfqd->prio_trees[cfqq->ioprio];
+ struct rb_node **p, *parent;
+ struct cfq_queue *__cfqq;
+
+ if (!RB_EMPTY_NODE(&cfqq->p_node))
+ rb_erase_init(&cfqq->p_node, root);
+
+ if (cfq_class_idle(cfqq))
+ return;
+ if (!cfqq->next_rq)
+ return;
+
+ __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->ioprio, cfqq->next_rq->sector,
+ &parent, &p);
+ BUG_ON(__cfqq);
+
+ rb_link_node(&cfqq->p_node, parent, p);
+ rb_insert_color(&cfqq->p_node, root);
+}
+
/*
* Update cfqq's position in the service tree.
*/
@@ -552,8 +622,10 @@
/*
* Resorting requires the cfqq to be on the RR list already.
*/
- if (cfq_cfqq_on_rr(cfqq))
+ if (cfq_cfqq_on_rr(cfqq)) {
cfq_service_tree_add(cfqd, cfqq, 0);
+ cfq_prio_tree_add(cfqd, cfqq);
+ }
}
/*
@@ -584,6 +656,8 @@
if (!RB_EMPTY_NODE(&cfqq->rb_node))
cfq_rb_erase(&cfqq->rb_node, &cfqd->service_tree);
+ if (!RB_EMPTY_NODE(&cfqq->p_node))
+ rb_erase_init(&cfqq->p_node, &cfqd->prio_trees[cfqq->ioprio]);
BUG_ON(!cfqd->busy_queues);
cfqd->busy_queues--;
@@ -613,7 +687,7 @@
{
struct cfq_queue *cfqq = RQ_CFQQ(rq);
struct cfq_data *cfqd = cfqq->cfqd;
- struct request *__alias;
+ struct request *__alias, *prev;
cfqq->queued[rq_is_sync(rq)]++;
@@ -630,7 +704,15 @@
/*
* check if this request is a better next-serve candidate
*/
+ prev = cfqq->next_rq;
cfqq->next_rq = cfq_choose_req(cfqd, cfqq->next_rq, rq);
+
+ /*
+ * adjust priority tree position, if ->next_rq changes
+ */
+ if (prev != cfqq->next_rq)
+ cfq_prio_tree_add(cfqd, cfqq);
+
BUG_ON(!cfqq->next_rq);
}
@@ -843,11 +925,15 @@
/*
* Get and set a new active queue for service.
*/
-static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd)
+static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd,
+ struct cfq_queue *cfqq)
{
- struct cfq_queue *cfqq;
+ if (!cfqq) {
+ cfqq = cfq_get_next_queue(cfqd);
+ if (cfqq)
+ cfq_clear_cfqq_coop(cfqq);
+ }
- cfqq = cfq_get_next_queue(cfqd);
__cfq_set_active_queue(cfqd, cfqq);
return cfqq;
}
@@ -871,17 +957,89 @@
return cfq_dist_from_last(cfqd, rq) <= cic->seek_mean;
}
-static int cfq_close_cooperator(struct cfq_data *cfq_data,
- struct cfq_queue *cfqq)
+static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
+ struct cfq_queue *cur_cfqq)
{
+ struct rb_root *root = &cfqd->prio_trees[cur_cfqq->ioprio];
+ struct rb_node *parent, *node;
+ struct cfq_queue *__cfqq;
+ sector_t sector = cfqd->last_position;
+
+ if (RB_EMPTY_ROOT(root))
+ return NULL;
+
+ /*
+ * First, if we find a request starting at the end of the last
+ * request, choose it.
+ */
+ __cfqq = cfq_prio_tree_lookup(cfqd, cur_cfqq->ioprio,
+ sector, &parent, NULL);
+ if (__cfqq)
+ return __cfqq;
+
+ /*
+ * If the exact sector wasn't found, the parent of the NULL leaf
+ * will contain the closest sector.
+ */
+ __cfqq = rb_entry(parent, struct cfq_queue, p_node);
+ if (cfq_rq_close(cfqd, __cfqq->next_rq))
+ return __cfqq;
+
+ if (__cfqq->next_rq->sector < sector)
+ node = rb_next(&__cfqq->p_node);
+ else
+ node = rb_prev(&__cfqq->p_node);
+ if (!node)
+ return NULL;
+
+ __cfqq = rb_entry(node, struct cfq_queue, p_node);
+ if (cfq_rq_close(cfqd, __cfqq->next_rq))
+ return __cfqq;
+
+ return NULL;
+}
+
+/*
+ * cfqd - obvious
+ * cur_cfqq - passed in so that we don't decide that the current queue is
+ * closely cooperating with itself.
+ *
+ * So, basically we're assuming that that cur_cfqq has dispatched at least
+ * one request, and that cfqd->last_position reflects a position on the disk
+ * associated with the I/O issued by cur_cfqq. I'm not sure this is a valid
+ * assumption.
+ */
+static struct cfq_queue *cfq_close_cooperator(struct cfq_data *cfqd,
+ struct cfq_queue *cur_cfqq,
+ int probe)
+{
+ struct cfq_queue *cfqq;
+
+ /*
+ * A valid cfq_io_context is necessary to compare requests against
+ * the seek_mean of the current cfqq.
+ */
+ if (!cfqd->active_cic)
+ return NULL;
+
/*
* We should notice if some of the queues are cooperating, eg
* working closely on the same area of the disk. In that case,
* we can group them together and don't waste time idling.
*/
- return 0;
+ cfqq = cfqq_close(cfqd, cur_cfqq);
+ if (!cfqq)
+ return NULL;
+
+ if (cfq_cfqq_coop(cfqq))
+ return NULL;
+
+ if (!probe)
+ cfq_mark_cfqq_coop(cfqq);
+ return cfqq;
}
+
#define CIC_SEEKY(cic) ((cic)->seek_mean > (8 * 1024))
static void cfq_arm_slice_timer(struct cfq_data *cfqd)
@@ -920,13 +1078,6 @@
if (!cic || !atomic_read(&cic->ioc->nr_tasks))
return;
- /*
- * See if this prio level has a good candidate
- */
- if (cfq_close_cooperator(cfqd, cfqq) &&
- (sample_valid(cic->ttime_samples) && cic->ttime_mean > 2))
- return;
-
cfq_mark_cfqq_wait_request(cfqq);
/*
@@ -939,7 +1090,7 @@
sl = min(sl, msecs_to_jiffies(CFQ_MIN_TT));
mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
- cfq_log(cfqd, "arm_idle: %lu", sl);
+ cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl);
}
/*
@@ -1003,7 +1154,7 @@
*/
static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd)
{
- struct cfq_queue *cfqq;
+ struct cfq_queue *cfqq, *new_cfqq = NULL;
cfqq = cfqd->active_queue;
if (!cfqq)
@@ -1037,6 +1188,16 @@
goto keep_queue;
/*
+ * If another queue has a request waiting within our mean seek
+ * distance, let it run. The expire code will check for close
+ * cooperators and put the close queue at the front of the service
+ * tree.
+ */
+ new_cfqq = cfq_close_cooperator(cfqd, cfqq, 0);
+ if (new_cfqq)
+ goto expire;
+
+ /*
* No requests pending. If the active queue still has requests in
* flight or is idling for a new request, allow either of these
* conditions to happen (or time out) before selecting a new queue.
@@ -1050,7 +1211,7 @@
expire:
cfq_slice_expired(cfqd, 0);
new_queue:
- cfqq = cfq_set_active_queue(cfqd);
+ cfqq = cfq_set_active_queue(cfqd, new_cfqq);
keep_queue:
return cfqq;
}
@@ -1333,14 +1494,14 @@
if (ioc->ioc_data == cic)
rcu_assign_pointer(ioc->ioc_data, NULL);
- if (cic->cfqq[ASYNC]) {
- cfq_exit_cfqq(cfqd, cic->cfqq[ASYNC]);
- cic->cfqq[ASYNC] = NULL;
+ if (cic->cfqq[BLK_RW_ASYNC]) {
+ cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_ASYNC]);
+ cic->cfqq[BLK_RW_ASYNC] = NULL;
}
- if (cic->cfqq[SYNC]) {
- cfq_exit_cfqq(cfqd, cic->cfqq[SYNC]);
- cic->cfqq[SYNC] = NULL;
+ if (cic->cfqq[BLK_RW_SYNC]) {
+ cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_SYNC]);
+ cic->cfqq[BLK_RW_SYNC] = NULL;
}
}
@@ -1449,17 +1610,18 @@
spin_lock_irqsave(cfqd->queue->queue_lock, flags);
- cfqq = cic->cfqq[ASYNC];
+ cfqq = cic->cfqq[BLK_RW_ASYNC];
if (cfqq) {
struct cfq_queue *new_cfqq;
- new_cfqq = cfq_get_queue(cfqd, ASYNC, cic->ioc, GFP_ATOMIC);
+ new_cfqq = cfq_get_queue(cfqd, BLK_RW_ASYNC, cic->ioc,
+ GFP_ATOMIC);
if (new_cfqq) {
- cic->cfqq[ASYNC] = new_cfqq;
+ cic->cfqq[BLK_RW_ASYNC] = new_cfqq;
cfq_put_queue(cfqq);
}
}
- cfqq = cic->cfqq[SYNC];
+ cfqq = cic->cfqq[BLK_RW_SYNC];
if (cfqq)
cfq_mark_cfqq_prio_changed(cfqq);
@@ -1510,6 +1672,7 @@
}
RB_CLEAR_NODE(&cfqq->rb_node);
+ RB_CLEAR_NODE(&cfqq->p_node);
INIT_LIST_HEAD(&cfqq->fifo);
atomic_set(&cfqq->ref, 0);
@@ -1905,10 +2068,20 @@
* Remember that we saw a request from this process, but
* don't start queuing just yet. Otherwise we risk seeing lots
* of tiny requests, because we disrupt the normal plugging
- * and merging.
+ * and merging. If the request is already larger than a single
+ * page, let it rip immediately. For that case we assume that
+ * merging is already done. Ditto for a busy system that
+ * has other work pending, don't risk delaying until the
+ * idle timer unplug to continue working.
*/
- if (cfq_cfqq_wait_request(cfqq))
+ if (cfq_cfqq_wait_request(cfqq)) {
+ if (blk_rq_bytes(rq) > PAGE_CACHE_SIZE ||
+ cfqd->busy_queues > 1) {
+ del_timer(&cfqd->idle_slice_timer);
+ blk_start_queueing(cfqd->queue);
+ }
cfq_mark_cfqq_must_dispatch(cfqq);
+ }
} else if (cfq_should_preempt(cfqd, cfqq, rq)) {
/*
* not the active queue - expire current slice if it is
@@ -1992,16 +2165,24 @@
* or if we want to idle in case it has no pending requests.
*/
if (cfqd->active_queue == cfqq) {
+ const bool cfqq_empty = RB_EMPTY_ROOT(&cfqq->sort_list);
+
if (cfq_cfqq_slice_new(cfqq)) {
cfq_set_prio_slice(cfqd, cfqq);
cfq_clear_cfqq_slice_new(cfqq);
}
+ /*
+ * If there are no requests waiting in this queue, and
+ * there are other queues ready to issue requests, AND
+ * those other queues are issuing requests within our
+ * mean seek distance, give them a chance to run instead
+ * of idling.
+ */
if (cfq_slice_used(cfqq) || cfq_class_idle(cfqq))
cfq_slice_expired(cfqd, 1);
- else if (sync && !rq_noidle(rq) &&
- RB_EMPTY_ROOT(&cfqq->sort_list)) {
+ else if (cfqq_empty && !cfq_close_cooperator(cfqd, cfqq, 1) &&
+ sync && !rq_noidle(rq))
cfq_arm_slice_timer(cfqd);
- }
}
if (!cfqd->rq_in_driver)
@@ -2062,7 +2243,7 @@
if (!cic)
return ELV_MQUEUE_MAY;
- cfqq = cic_to_cfqq(cic, rw & REQ_RW_SYNC);
+ cfqq = cic_to_cfqq(cic, rw_is_sync(rw));
if (cfqq) {
cfq_init_prio_data(cfqq, cic->ioc);
cfq_prio_boost(cfqq);
@@ -2152,11 +2333,10 @@
struct cfq_data *cfqd =
container_of(work, struct cfq_data, unplug_work);
struct request_queue *q = cfqd->queue;
- unsigned long flags;
- spin_lock_irqsave(q->queue_lock, flags);
+ spin_lock_irq(q->queue_lock);
blk_start_queueing(q);
- spin_unlock_irqrestore(q->queue_lock, flags);
+ spin_unlock_irq(q->queue_lock);
}
/*
diff --git a/block/elevator.c b/block/elevator.c
index fb81bcc..7073a90 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -590,7 +590,7 @@
/*
* Call with queue lock held, interrupts disabled
*/
-void elv_quisce_start(struct request_queue *q)
+void elv_quiesce_start(struct request_queue *q)
{
queue_flag_set(QUEUE_FLAG_ELVSWITCH, q);
@@ -607,7 +607,7 @@
}
}
-void elv_quisce_end(struct request_queue *q)
+void elv_quiesce_end(struct request_queue *q)
{
queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q);
}
@@ -1126,7 +1126,7 @@
* Turn on BYPASS and drain all requests w/ elevator private data
*/
spin_lock_irq(q->queue_lock);
- elv_quisce_start(q);
+ elv_quiesce_start(q);
/*
* Remember old elevator.
@@ -1150,7 +1150,7 @@
*/
elevator_exit(old_elevator);
spin_lock_irq(q->queue_lock);
- elv_quisce_end(q);
+ elv_quiesce_end(q);
spin_unlock_irq(q->queue_lock);
blk_add_trace_msg(q, "elv switch: %s", e->elevator_type->elevator_name);
diff --git a/block/ioctl.c b/block/ioctl.c
index 0f22e62..ad474d4 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -146,8 +146,6 @@
struct bio *bio;
bio = bio_alloc(GFP_KERNEL, 0);
- if (!bio)
- return -ENOMEM;
bio->bi_end_io = blk_ioc_discard_endio;
bio->bi_bdev = bdev;
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 626ee27..84b7f87 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -217,7 +217,7 @@
static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr,
struct bio *bio)
{
- int ret = 0;
+ int r, ret = 0;
/*
* fill in all the output members
@@ -242,7 +242,9 @@
ret = -EFAULT;
}
- blk_rq_unmap_user(bio);
+ r = blk_rq_unmap_user(bio);
+ if (!ret)
+ ret = r;
blk_put_request(rq);
return ret;
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 779e4e5..d060e6f 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -300,9 +300,9 @@
static struct platform_suspend_ops acpi_suspend_ops = {
.valid = acpi_suspend_state_valid,
.begin = acpi_suspend_begin,
- .prepare = acpi_pm_prepare,
+ .prepare_late = acpi_pm_prepare,
.enter = acpi_suspend_enter,
- .finish = acpi_pm_finish,
+ .wake = acpi_pm_finish,
.end = acpi_pm_end,
};
@@ -328,9 +328,9 @@
static struct platform_suspend_ops acpi_suspend_ops_old = {
.valid = acpi_suspend_state_valid,
.begin = acpi_suspend_begin_old,
- .prepare = acpi_pm_disable_gpes,
+ .prepare_late = acpi_pm_disable_gpes,
.enter = acpi_suspend_enter,
- .finish = acpi_pm_finish,
+ .wake = acpi_pm_finish,
.end = acpi_pm_end,
.recover = acpi_pm_finish,
};
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 065507c..17c5d48 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1231,6 +1231,9 @@
*
* We follow the current spec and consider that 0x69/0x96
* identifies a port multiplier and 0x3c/0xc3 a SEMB device.
+ * Unfortunately, WDC WD1600JS-62MHB5 (a hard drive) reports
+ * SEMB signature. This is worked around in
+ * ata_dev_read_id().
*/
if ((tf->lbam == 0) && (tf->lbah == 0)) {
DPRINTK("found ATA device by sig\n");
@@ -1248,8 +1251,8 @@
}
if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) {
- printk(KERN_INFO "ata: SEMB device ignored\n");
- return ATA_DEV_SEMB_UNSUP; /* not yet */
+ DPRINTK("found SEMB device by sig (could be ATA device)\n");
+ return ATA_DEV_SEMB;
}
DPRINTK("unknown device\n");
@@ -1653,8 +1656,8 @@
/*
* Process compact flash extended modes
*/
- int pio = id[163] & 0x7;
- int dma = (id[163] >> 3) & 7;
+ int pio = (id[ATA_ID_CFA_MODES] >> 0) & 0x7;
+ int dma = (id[ATA_ID_CFA_MODES] >> 3) & 0x7;
if (pio)
pio_mask |= (1 << 5);
@@ -2080,6 +2083,7 @@
struct ata_taskfile tf;
unsigned int err_mask = 0;
const char *reason;
+ bool is_semb = class == ATA_DEV_SEMB;
int may_fallback = 1, tried_spinup = 0;
int rc;
@@ -2090,6 +2094,8 @@
ata_tf_init(dev, &tf);
switch (class) {
+ case ATA_DEV_SEMB:
+ class = ATA_DEV_ATA; /* some hard drives report SEMB sig */
case ATA_DEV_ATA:
tf.command = ATA_CMD_ID_ATA;
break;
@@ -2126,6 +2132,14 @@
return -ENOENT;
}
+ if (is_semb) {
+ ata_dev_printk(dev, KERN_INFO, "IDENTIFY failed on "
+ "device w/ SEMB sig, disabled\n");
+ /* SEMB is not supported yet */
+ *p_class = ATA_DEV_SEMB_UNSUP;
+ return 0;
+ }
+
if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
/* Device or controller might have reported
* the wrong device class. Give a shot at the
@@ -2412,7 +2426,8 @@
/* ATA-specific feature tests */
if (dev->class == ATA_DEV_ATA) {
if (ata_id_is_cfa(id)) {
- if (id[162] & 1) /* CPRM may make this media unusable */
+ /* CPRM may make this media unusable */
+ if (id[ATA_ID_CFA_KEY_MGMT] & 1)
ata_dev_printk(dev, KERN_WARNING,
"supports DRM functions and may "
"not be fully accessable.\n");
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index b9747fa..2733b0c 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -647,23 +647,45 @@
return rc;
}
+static int ata_ioc32(struct ata_port *ap)
+{
+ if (ap->flags & ATA_FLAG_PIO_DMA)
+ return 1;
+ if (ap->pflags & ATA_PFLAG_PIO32)
+ return 1;
+ return 0;
+}
+
int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev,
int cmd, void __user *arg)
{
int val = -EINVAL, rc = -EINVAL;
+ unsigned long flags;
switch (cmd) {
case ATA_IOC_GET_IO32:
- val = 0;
+ spin_lock_irqsave(ap->lock, flags);
+ val = ata_ioc32(ap);
+ spin_unlock_irqrestore(ap->lock, flags);
if (copy_to_user(arg, &val, 1))
return -EFAULT;
return 0;
case ATA_IOC_SET_IO32:
val = (unsigned long) arg;
- if (val != 0)
- return -EINVAL;
- return 0;
+ rc = 0;
+ spin_lock_irqsave(ap->lock, flags);
+ if (ap->pflags & ATA_PFLAG_PIO32CHANGE) {
+ if (val)
+ ap->pflags |= ATA_PFLAG_PIO32;
+ else
+ ap->pflags &= ~ATA_PFLAG_PIO32;
+ } else {
+ if (val != ata_ioc32(ap))
+ rc = -EINVAL;
+ }
+ spin_unlock_irqrestore(ap->lock, flags);
+ return rc;
case HDIO_GET_IDENTITY:
return ata_get_identity(ap, scsidev, arg);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 8332e97..bb18415 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -87,6 +87,7 @@
.inherits = &ata_bmdma_port_ops,
.sff_data_xfer = ata_sff_data_xfer32,
+ .port_start = ata_sff_port_start32,
};
EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
@@ -769,6 +770,9 @@
void __iomem *data_addr = ap->ioaddr.data_addr;
unsigned int words = buflen >> 2;
int slop = buflen & 3;
+
+ if (!(ap->pflags & ATA_PFLAG_PIO32))
+ return ata_sff_data_xfer(dev, buf, buflen, rw);
/* Transfer multiple of 4 bytes */
if (rw == READ)
@@ -2402,6 +2406,29 @@
EXPORT_SYMBOL_GPL(ata_sff_port_start);
/**
+ * ata_sff_port_start32 - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Allocates space for PRD table if the device
+ * is DMA capable SFF.
+ *
+ * May be used as the port_start() entry in ata_port_operations for
+ * devices that are capable of 32bit PIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_sff_port_start32(struct ata_port *ap)
+{
+ ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
+ if (ap->ioaddr.bmdma_addr)
+ return ata_port_start(ap);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sff_port_start32);
+
+/**
* ata_sff_std_ports - initialize ioaddr with standard port offsets.
* @ioaddr: IO address structure to be initialized
*
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 81ab5700..122c786 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -8,7 +8,7 @@
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
- * Portions Copyright (C) 2005-2007 MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2009 MontaVista Software, Inc.
*
* TODO
* Look into engine reset on timeout errors. Should not be required.
@@ -24,7 +24,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.11"
+#define DRV_VERSION "0.6.12"
struct hpt_clock {
u8 xfer_speed;
@@ -445,23 +445,6 @@
}
/**
- * hpt370_bmdma_start - DMA engine begin
- * @qc: ATA command
- *
- * The 370 and 370A want us to reset the DMA engine each time we
- * use it. The 372 and later are fine.
- */
-
-static void hpt370_bmdma_start(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
- udelay(10);
- ata_bmdma_start(qc);
-}
-
-/**
* hpt370_bmdma_end - DMA engine stop
* @qc: ATA command
*
@@ -598,7 +581,6 @@
static struct ata_port_operations hpt370_port_ops = {
.inherits = &ata_bmdma_port_ops,
- .bmdma_start = hpt370_bmdma_start,
.bmdma_stop = hpt370_bmdma_stop,
.mode_filter = hpt370_filter,
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 3f830f0..f72c6c5 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -108,6 +108,7 @@
struct ata_port_operations *ops;
unsigned int pio_mask;
unsigned int flags;
+ unsigned int pflags;
int (*setup)(struct platform_device *, struct legacy_probe *probe,
struct legacy_data *data);
};
@@ -284,9 +285,11 @@
unsigned char *buf, unsigned int buflen, int rw)
{
int slop = buflen & 3;
+ struct ata_port *ap = dev->link->ap;
+
/* 32bit I/O capable *and* we need to write a whole number of dwords */
- if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) {
- struct ata_port *ap = dev->link->ap;
+ if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)
+ && (ap->pflags & ATA_PFLAG_PIO32)) {
unsigned long flags;
local_irq_save(flags);
@@ -736,7 +739,8 @@
struct ata_port *ap = adev->link->ap;
int slop = buflen & 3;
- if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) {
+ if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)
+ && (ap->pflags & ATA_PFLAG_PIO32)) {
if (rw == WRITE)
iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
else
@@ -858,27 +862,30 @@
static struct legacy_controller controllers[] = {
{"BIOS", &legacy_port_ops, 0x1F,
- ATA_FLAG_NO_IORDY, NULL },
+ ATA_FLAG_NO_IORDY, 0, NULL },
{"Snooping", &simple_port_ops, 0x1F,
- 0 , NULL },
+ 0, 0, NULL },
{"PDC20230", &pdc20230_port_ops, 0x7,
- ATA_FLAG_NO_IORDY, NULL },
+ ATA_FLAG_NO_IORDY,
+ ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, NULL },
{"HT6560A", &ht6560a_port_ops, 0x07,
- ATA_FLAG_NO_IORDY, NULL },
+ ATA_FLAG_NO_IORDY, 0, NULL },
{"HT6560B", &ht6560b_port_ops, 0x1F,
- ATA_FLAG_NO_IORDY, NULL },
+ ATA_FLAG_NO_IORDY, 0, NULL },
{"OPTI82C611A", &opti82c611a_port_ops, 0x0F,
- 0 , NULL },
+ 0, 0, NULL },
{"OPTI82C46X", &opti82c46x_port_ops, 0x0F,
- 0 , NULL },
+ 0, 0, NULL },
{"QDI6500", &qdi6500_port_ops, 0x07,
- ATA_FLAG_NO_IORDY, qdi_port },
+ ATA_FLAG_NO_IORDY,
+ ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
{"QDI6580", &qdi6580_port_ops, 0x1F,
- 0 , qdi_port },
+ 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
{"QDI6580DP", &qdi6580dp_port_ops, 0x1F,
- 0 , qdi_port },
+ 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
{"W83759A", &winbond_port_ops, 0x1F,
- 0 , winbond_port }
+ 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE,
+ winbond_port }
};
/**
@@ -1008,6 +1015,7 @@
ap->ops = ops;
ap->pio_mask = pio_modes;
ap->flags |= ATA_FLAG_SLAVE_POSS | iordy;
+ ap->pflags |= controller->pflags;
ap->ioaddr.cmd_addr = io_addr;
ap->ioaddr.altstatus_addr = ctrl_addr;
ap->ioaddr.ctl_addr = ctrl_addr;
@@ -1032,6 +1040,7 @@
return 0;
}
}
+ ata_host_detach(host);
fail:
platform_device_unregister(pdev);
return ret;
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index 0fb6b1b1..dd53a66 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -44,7 +44,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_ninja32"
-#define DRV_VERSION "0.1.3"
+#define DRV_VERSION "0.1.5"
/**
@@ -86,6 +86,7 @@
.sff_dev_select = ninja32_dev_select,
.cable_detect = ata_cable_40wire,
.set_piomode = ninja32_set_piomode,
+ .sff_data_xfer = ata_sff_data_xfer32
};
static void ninja32_program(void __iomem *base)
@@ -144,6 +145,7 @@
ap->ioaddr.altstatus_addr = base + 0x1E;
ap->ioaddr.bmdma_addr = base;
ata_sff_std_ports(&ap->ioaddr);
+ ap->pflags = ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
ninja32_program(base);
/* FIXME: Should we disable them at remove ? */
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index b08e6e0..45657ca 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -62,7 +62,7 @@
#include <linux/dmi.h>
#define DRV_NAME "pata_via"
-#define DRV_VERSION "0.3.3"
+#define DRV_VERSION "0.3.4"
/*
* The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
@@ -136,6 +136,9 @@
{ NULL }
};
+struct via_port {
+ u8 cached_device;
+};
/*
* Cable special cases
@@ -346,14 +349,70 @@
*/
static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
- struct ata_taskfile tmp_tf;
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ struct via_port *vp = ap->private_data;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+ int newctl = 0;
- if (ap->ctl != ap->last_ctl && !(tf->flags & ATA_TFLAG_DEVICE)) {
- tmp_tf = *tf;
- tmp_tf.flags |= ATA_TFLAG_DEVICE;
- tf = &tmp_tf;
+ if (tf->ctl != ap->last_ctl) {
+ iowrite8(tf->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = tf->ctl;
+ ata_wait_idle(ap);
+ newctl = 1;
}
- ata_sff_tf_load(ap, tf);
+
+ if (tf->flags & ATA_TFLAG_DEVICE) {
+ iowrite8(tf->device, ioaddr->device_addr);
+ vp->cached_device = tf->device;
+ } else if (newctl)
+ iowrite8(vp->cached_device, ioaddr->device_addr);
+
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ WARN_ON_ONCE(!ioaddr->ctl_addr);
+ iowrite8(tf->hob_feature, ioaddr->feature_addr);
+ iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
+ iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
+ iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
+ iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
+ VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+ tf->hob_feature,
+ tf->hob_nsect,
+ tf->hob_lbal,
+ tf->hob_lbam,
+ tf->hob_lbah);
+ }
+
+ if (is_addr) {
+ iowrite8(tf->feature, ioaddr->feature_addr);
+ iowrite8(tf->nsect, ioaddr->nsect_addr);
+ iowrite8(tf->lbal, ioaddr->lbal_addr);
+ iowrite8(tf->lbam, ioaddr->lbam_addr);
+ iowrite8(tf->lbah, ioaddr->lbah_addr);
+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+ tf->feature,
+ tf->nsect,
+ tf->lbal,
+ tf->lbam,
+ tf->lbah);
+ }
+
+ ata_wait_idle(ap);
+}
+
+static int via_port_start(struct ata_port *ap)
+{
+ struct via_port *vp;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ int ret = ata_sff_port_start(ap);
+ if (ret < 0)
+ return ret;
+
+ vp = devm_kzalloc(&pdev->dev, sizeof(struct via_port), GFP_KERNEL);
+ if (vp == NULL)
+ return -ENOMEM;
+ ap->private_data = vp;
+ return 0;
}
static struct scsi_host_template via_sht = {
@@ -367,6 +426,7 @@
.set_dmamode = via_set_dmamode,
.prereset = via_pre_reset,
.sff_tf_load = via_tf_load,
+ .port_start = via_port_start,
};
static struct ata_port_operations via_port_ops_noirq = {
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 37ae5dc..870dcfd 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1881,6 +1881,39 @@
return status;
}
+static void mv_rw_multi_errata_sata24(struct ata_queued_cmd *qc)
+{
+ struct ata_taskfile *tf = &qc->tf;
+ /*
+ * Workaround for 88SX60x1 FEr SATA#24.
+ *
+ * Chip may corrupt WRITEs if multi_count >= 4kB.
+ * Note that READs are unaffected.
+ *
+ * It's not clear if this errata really means "4K bytes",
+ * or if it always happens for multi_count > 7
+ * regardless of device sector_size.
+ *
+ * So, for safety, any write with multi_count > 7
+ * gets converted here into a regular PIO write instead:
+ */
+ if ((tf->flags & ATA_TFLAG_WRITE) && is_multi_taskfile(tf)) {
+ if (qc->dev->multi_count > 7) {
+ switch (tf->command) {
+ case ATA_CMD_WRITE_MULTI:
+ tf->command = ATA_CMD_PIO_WRITE;
+ break;
+ case ATA_CMD_WRITE_MULTI_FUA_EXT:
+ tf->flags &= ~ATA_TFLAG_FUA; /* ugh */
+ /* fall through */
+ case ATA_CMD_WRITE_MULTI_EXT:
+ tf->command = ATA_CMD_PIO_WRITE_EXT;
+ break;
+ }
+ }
+ }
+}
+
/**
* mv_qc_prep - Host specific command preparation.
* @qc: queued command to prepare
@@ -1898,17 +1931,24 @@
struct ata_port *ap = qc->ap;
struct mv_port_priv *pp = ap->private_data;
__le16 *cw;
- struct ata_taskfile *tf;
+ struct ata_taskfile *tf = &qc->tf;
u16 flags = 0;
unsigned in_index;
- if ((qc->tf.protocol != ATA_PROT_DMA) &&
- (qc->tf.protocol != ATA_PROT_NCQ))
+ switch (tf->protocol) {
+ case ATA_PROT_DMA:
+ case ATA_PROT_NCQ:
+ break; /* continue below */
+ case ATA_PROT_PIO:
+ mv_rw_multi_errata_sata24(qc);
return;
+ default:
+ return;
+ }
/* Fill in command request block
*/
- if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+ if (!(tf->flags & ATA_TFLAG_WRITE))
flags |= CRQB_FLAG_READ;
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
@@ -1924,7 +1964,6 @@
pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
cw = &pp->crqb[in_index].ata_cmd[0];
- tf = &qc->tf;
/* Sadly, the CRQB cannot accomodate all registers--there are
* only 11 bytes...so we must pick and choose required
@@ -1990,16 +2029,16 @@
struct ata_port *ap = qc->ap;
struct mv_port_priv *pp = ap->private_data;
struct mv_crqb_iie *crqb;
- struct ata_taskfile *tf;
+ struct ata_taskfile *tf = &qc->tf;
unsigned in_index;
u32 flags = 0;
- if ((qc->tf.protocol != ATA_PROT_DMA) &&
- (qc->tf.protocol != ATA_PROT_NCQ))
+ if ((tf->protocol != ATA_PROT_DMA) &&
+ (tf->protocol != ATA_PROT_NCQ))
return;
/* Fill in Gen IIE command request block */
- if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+ if (!(tf->flags & ATA_TFLAG_WRITE))
flags |= CRQB_FLAG_READ;
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
@@ -2015,7 +2054,6 @@
crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
crqb->flags = cpu_to_le32(flags);
- tf = &qc->tf;
crqb->ata_cmd[0] = cpu_to_le32(
(tf->command << 16) |
(tf->feature << 24)
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index be20430..9359613a 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -1059,7 +1059,7 @@
goto out;
}
- err = pci_set_dma_mask(dev, DMA_32BIT_MASK);
+ err = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
if (err) {
dev_warn(&dev->dev, "Failed to set 32-bit DMA mask\n");
goto out;
diff --git a/drivers/base/base.h b/drivers/base/base.h
index ddc97496..b528145 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -115,7 +115,7 @@
static inline int driver_match_device(struct device_driver *drv,
struct device *dev)
{
- return drv->bus->match && drv->bus->match(dev, drv);
+ return drv->bus->match ? drv->bus->match(dev, drv) : 1;
}
extern void sysdev_shutdown(void);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index e73c92d..4aa527b 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -891,7 +891,8 @@
set_dev_node(dev, dev_to_node(parent));
/* first, register with generic layer. */
- error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev_name(dev));
+ /* we require the name to be set before, and pass NULL */
+ error = kobject_add(&dev->kobj, dev->kobj.parent, NULL);
if (error)
goto Error;
@@ -1142,6 +1143,9 @@
struct device *child;
int error = 0;
+ if (!parent->p)
+ return 0;
+
klist_iter_init(&parent->p->klist_children, &i);
while ((child = next_device(&i)) && !error)
error = fn(child, data);
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index f17c326..742cbe6 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -179,6 +179,7 @@
wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
async_synchronize_full();
}
+EXPORT_SYMBOL_GPL(wait_for_device_probe);
/**
* driver_probe_device - attempt to bind device & driver together
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index d2198f6..b5b6c97 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -990,6 +990,8 @@
{
int error;
+ early_platform_cleanup();
+
error = device_register(&platform_bus);
if (error)
return error;
@@ -1020,3 +1022,240 @@
}
EXPORT_SYMBOL_GPL(dma_get_required_mask);
#endif
+
+static __initdata LIST_HEAD(early_platform_driver_list);
+static __initdata LIST_HEAD(early_platform_device_list);
+
+/**
+ * early_platform_driver_register
+ * @edrv: early_platform driver structure
+ * @buf: string passed from early_param()
+ */
+int __init early_platform_driver_register(struct early_platform_driver *epdrv,
+ char *buf)
+{
+ unsigned long index;
+ int n;
+
+ /* Simply add the driver to the end of the global list.
+ * Drivers will by default be put on the list in compiled-in order.
+ */
+ if (!epdrv->list.next) {
+ INIT_LIST_HEAD(&epdrv->list);
+ list_add_tail(&epdrv->list, &early_platform_driver_list);
+ }
+
+ /* If the user has specified device then make sure the driver
+ * gets prioritized. The driver of the last device specified on
+ * command line will be put first on the list.
+ */
+ n = strlen(epdrv->pdrv->driver.name);
+ if (buf && !strncmp(buf, epdrv->pdrv->driver.name, n)) {
+ list_move(&epdrv->list, &early_platform_driver_list);
+
+ if (!strcmp(buf, epdrv->pdrv->driver.name))
+ epdrv->requested_id = -1;
+ else if (buf[n] == '.' && strict_strtoul(&buf[n + 1], 10,
+ &index) == 0)
+ epdrv->requested_id = index;
+ else
+ epdrv->requested_id = EARLY_PLATFORM_ID_ERROR;
+ }
+
+ return 0;
+}
+
+/**
+ * early_platform_add_devices - add a numbers of early platform devices
+ * @devs: array of early platform devices to add
+ * @num: number of early platform devices in array
+ */
+void __init early_platform_add_devices(struct platform_device **devs, int num)
+{
+ struct device *dev;
+ int i;
+
+ /* simply add the devices to list */
+ for (i = 0; i < num; i++) {
+ dev = &devs[i]->dev;
+
+ if (!dev->devres_head.next) {
+ INIT_LIST_HEAD(&dev->devres_head);
+ list_add_tail(&dev->devres_head,
+ &early_platform_device_list);
+ }
+ }
+}
+
+/**
+ * early_platform_driver_register_all
+ * @class_str: string to identify early platform driver class
+ */
+void __init early_platform_driver_register_all(char *class_str)
+{
+ /* The "class_str" parameter may or may not be present on the kernel
+ * command line. If it is present then there may be more than one
+ * matching parameter.
+ *
+ * Since we register our early platform drivers using early_param()
+ * we need to make sure that they also get registered in the case
+ * when the parameter is missing from the kernel command line.
+ *
+ * We use parse_early_options() to make sure the early_param() gets
+ * called at least once. The early_param() may be called more than
+ * once since the name of the preferred device may be specified on
+ * the kernel command line. early_platform_driver_register() handles
+ * this case for us.
+ */
+ parse_early_options(class_str);
+}
+
+/**
+ * early_platform_match
+ * @edrv: early platform driver structure
+ * @id: id to match against
+ */
+static __init struct platform_device *
+early_platform_match(struct early_platform_driver *epdrv, int id)
+{
+ struct platform_device *pd;
+
+ list_for_each_entry(pd, &early_platform_device_list, dev.devres_head)
+ if (platform_match(&pd->dev, &epdrv->pdrv->driver))
+ if (pd->id == id)
+ return pd;
+
+ return NULL;
+}
+
+/**
+ * early_platform_left
+ * @edrv: early platform driver structure
+ * @id: return true if id or above exists
+ */
+static __init int early_platform_left(struct early_platform_driver *epdrv,
+ int id)
+{
+ struct platform_device *pd;
+
+ list_for_each_entry(pd, &early_platform_device_list, dev.devres_head)
+ if (platform_match(&pd->dev, &epdrv->pdrv->driver))
+ if (pd->id >= id)
+ return 1;
+
+ return 0;
+}
+
+/**
+ * early_platform_driver_probe_id
+ * @class_str: string to identify early platform driver class
+ * @id: id to match against
+ * @nr_probe: number of platform devices to successfully probe before exiting
+ */
+static int __init early_platform_driver_probe_id(char *class_str,
+ int id,
+ int nr_probe)
+{
+ struct early_platform_driver *epdrv;
+ struct platform_device *match;
+ int match_id;
+ int n = 0;
+ int left = 0;
+
+ list_for_each_entry(epdrv, &early_platform_driver_list, list) {
+ /* only use drivers matching our class_str */
+ if (strcmp(class_str, epdrv->class_str))
+ continue;
+
+ if (id == -2) {
+ match_id = epdrv->requested_id;
+ left = 1;
+
+ } else {
+ match_id = id;
+ left += early_platform_left(epdrv, id);
+
+ /* skip requested id */
+ switch (epdrv->requested_id) {
+ case EARLY_PLATFORM_ID_ERROR:
+ case EARLY_PLATFORM_ID_UNSET:
+ break;
+ default:
+ if (epdrv->requested_id == id)
+ match_id = EARLY_PLATFORM_ID_UNSET;
+ }
+ }
+
+ switch (match_id) {
+ case EARLY_PLATFORM_ID_ERROR:
+ pr_warning("%s: unable to parse %s parameter\n",
+ class_str, epdrv->pdrv->driver.name);
+ /* fall-through */
+ case EARLY_PLATFORM_ID_UNSET:
+ match = NULL;
+ break;
+ default:
+ match = early_platform_match(epdrv, match_id);
+ }
+
+ if (match) {
+ if (epdrv->pdrv->probe(match))
+ pr_warning("%s: unable to probe %s early.\n",
+ class_str, match->name);
+ else
+ n++;
+ }
+
+ if (n >= nr_probe)
+ break;
+ }
+
+ if (left)
+ return n;
+ else
+ return -ENODEV;
+}
+
+/**
+ * early_platform_driver_probe
+ * @class_str: string to identify early platform driver class
+ * @nr_probe: number of platform devices to successfully probe before exiting
+ * @user_only: only probe user specified early platform devices
+ */
+int __init early_platform_driver_probe(char *class_str,
+ int nr_probe,
+ int user_only)
+{
+ int k, n, i;
+
+ n = 0;
+ for (i = -2; n < nr_probe; i++) {
+ k = early_platform_driver_probe_id(class_str, i, nr_probe - n);
+
+ if (k < 0)
+ break;
+
+ n += k;
+
+ if (user_only)
+ break;
+ }
+
+ return n;
+}
+
+/**
+ * early_platform_cleanup - clean up early platform code
+ */
+void __init early_platform_cleanup(void)
+{
+ struct platform_device *pd, *pd2;
+
+ /* clean up the devres list used to chain devices */
+ list_for_each_entry_safe(pd, pd2, &early_platform_device_list,
+ dev.devres_head) {
+ list_del(&pd->dev.devres_head);
+ memset(&pd->dev.devres_head, 0, sizeof(pd->dev.devres_head));
+ }
+}
+
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index bdd4f5f..5f7e64b 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -275,8 +275,10 @@
if (rw == READ) {
copy_from_brd(mem + off, brd, sector, len);
flush_dcache_page(page);
- } else
+ } else {
+ flush_dcache_page(page);
copy_to_brd(brd, mem + off, sector, len);
+ }
kunmap_atomic(mem, KM_USER0);
out:
@@ -436,6 +438,7 @@
if (!brd->brd_queue)
goto out_free_dev;
blk_queue_make_request(brd->brd_queue, brd_make_request);
+ blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_TAG, NULL);
blk_queue_max_sectors(brd->brd_queue, 1024);
blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY);
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 0ef6f08..4d4d5e0 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3505,7 +3505,7 @@
/* The Inbound Post Queue only accepts 32-bit physical addresses for the
CCISS commands, so they must be allocated from the lower 4GiB of
memory. */
- err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
iounmap(vaddr);
return -ENOMEM;
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 69b7f8e..689cd27 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -1025,6 +1025,7 @@
{
struct urb *urb = &sc->work_urb;
struct bulk_cs_wrap *bcs;
+ int endp;
int len;
int rc;
@@ -1033,6 +1034,10 @@
return;
}
+ endp = usb_pipeendpoint(sc->last_pipe);
+ if (usb_pipein(sc->last_pipe))
+ endp |= USB_DIR_IN;
+
if (cmd->state == UB_CMDST_CLEAR) {
if (urb->status == -EPIPE) {
/*
@@ -1048,9 +1053,7 @@
* We ignore the result for the halt clear.
*/
- /* reset the endpoint toggle */
- usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
- usb_pipeout(sc->last_pipe), 0);
+ usb_reset_endpoint(sc->dev, endp);
ub_state_sense(sc, cmd);
@@ -1065,9 +1068,7 @@
* We ignore the result for the halt clear.
*/
- /* reset the endpoint toggle */
- usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
- usb_pipeout(sc->last_pipe), 0);
+ usb_reset_endpoint(sc->dev, endp);
ub_state_stat(sc, cmd);
@@ -1082,9 +1083,7 @@
* We ignore the result for the halt clear.
*/
- /* reset the endpoint toggle */
- usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
- usb_pipeout(sc->last_pipe), 0);
+ usb_reset_endpoint(sc->dev, endp);
ub_state_stat_counted(sc, cmd);
@@ -2119,8 +2118,7 @@
del_timer_sync(&timer);
usb_kill_urb(&sc->work_urb);
- /* reset the endpoint toggle */
- usb_settoggle(sc->dev, endp, usb_pipeout(sc->last_pipe), 0);
+ usb_reset_endpoint(sc->dev, endp);
return 0;
}
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index 10d6cbd..2224b76 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -1226,7 +1226,7 @@
int i, ret = -ENOMEM;
for (i = 0; i < num_pages; i++) {
- page = alloc_page(GFP_KERNEL | GFP_DMA32);
+ page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO);
/* agp_free_memory() needs gart address */
if (page == NULL)
goto out;
@@ -1257,7 +1257,7 @@
{
struct page * page;
- page = alloc_page(GFP_KERNEL | GFP_DMA32);
+ page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO);
if (page == NULL)
return NULL;
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 9d9490e..3686912 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -2131,6 +2131,8 @@
{ PCI_DEVICE_ID_INTEL_82845G_HB, PCI_DEVICE_ID_INTEL_82845G_IG, 0, "830M",
&intel_845_driver, &intel_830_driver },
{ PCI_DEVICE_ID_INTEL_82850_HB, 0, 0, "i850", &intel_850_driver, NULL },
+ { PCI_DEVICE_ID_INTEL_82854_HB, PCI_DEVICE_ID_INTEL_82854_IG, 0, "854",
+ &intel_845_driver, &intel_830_driver },
{ PCI_DEVICE_ID_INTEL_82855PM_HB, 0, 0, "855PM", &intel_845_driver, NULL },
{ PCI_DEVICE_ID_INTEL_82855GM_HB, PCI_DEVICE_ID_INTEL_82855GM_IG, 0, "855GM",
&intel_845_driver, &intel_830_driver },
@@ -2355,6 +2357,7 @@
ID(PCI_DEVICE_ID_INTEL_82845_HB),
ID(PCI_DEVICE_ID_INTEL_82845G_HB),
ID(PCI_DEVICE_ID_INTEL_82850_HB),
+ ID(PCI_DEVICE_ID_INTEL_82854_HB),
ID(PCI_DEVICE_ID_INTEL_82855PM_HB),
ID(PCI_DEVICE_ID_INTEL_82855GM_HB),
ID(PCI_DEVICE_ID_INTEL_82860_HB),
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 50dfa3b..340ba4f 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -72,7 +72,7 @@
#ifdef CONFIG_IA64
static void __iomem *hpet_mctr;
-static cycle_t read_hpet(void)
+static cycle_t read_hpet(struct clocksource *cs)
{
return (cycle_t)read_counter((void __iomem *)hpet_mctr);
}
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index e93fc8d2..aa83a08 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -285,6 +285,11 @@
/* Events that were received with the proper format. */
IPMI_STAT_events,
+ /* Retransmissions on IPMB that failed. */
+ IPMI_STAT_dropped_rexmit_ipmb_commands,
+
+ /* Retransmissions on LAN that failed. */
+ IPMI_STAT_dropped_rexmit_lan_commands,
/* This *must* remain last, add new values above this. */
IPMI_NUM_STATS
@@ -445,6 +450,20 @@
#define ipmi_get_stat(intf, stat) \
((unsigned int) atomic_read(&(intf)->stats[IPMI_STAT_ ## stat]))
+static int is_lan_addr(struct ipmi_addr *addr)
+{
+ return addr->addr_type == IPMI_LAN_ADDR_TYPE;
+}
+
+static int is_ipmb_addr(struct ipmi_addr *addr)
+{
+ return addr->addr_type == IPMI_IPMB_ADDR_TYPE;
+}
+
+static int is_ipmb_bcast_addr(struct ipmi_addr *addr)
+{
+ return addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE;
+}
static void free_recv_msg_list(struct list_head *q)
{
@@ -601,8 +620,7 @@
return (smi_addr1->lun == smi_addr2->lun);
}
- if ((addr1->addr_type == IPMI_IPMB_ADDR_TYPE)
- || (addr1->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
+ if (is_ipmb_addr(addr1) || is_ipmb_bcast_addr(addr1)) {
struct ipmi_ipmb_addr *ipmb_addr1
= (struct ipmi_ipmb_addr *) addr1;
struct ipmi_ipmb_addr *ipmb_addr2
@@ -612,7 +630,7 @@
&& (ipmb_addr1->lun == ipmb_addr2->lun));
}
- if (addr1->addr_type == IPMI_LAN_ADDR_TYPE) {
+ if (is_lan_addr(addr1)) {
struct ipmi_lan_addr *lan_addr1
= (struct ipmi_lan_addr *) addr1;
struct ipmi_lan_addr *lan_addr2
@@ -644,14 +662,13 @@
|| (addr->channel < 0))
return -EINVAL;
- if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE)
- || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
+ if (is_ipmb_addr(addr) || is_ipmb_bcast_addr(addr)) {
if (len < sizeof(struct ipmi_ipmb_addr))
return -EINVAL;
return 0;
}
- if (addr->addr_type == IPMI_LAN_ADDR_TYPE) {
+ if (is_lan_addr(addr)) {
if (len < sizeof(struct ipmi_lan_addr))
return -EINVAL;
return 0;
@@ -1503,8 +1520,7 @@
memcpy(&(smi_msg->data[2]), msg->data, msg->data_len);
smi_msg->data_size = msg->data_len + 2;
ipmi_inc_stat(intf, sent_local_commands);
- } else if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE)
- || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
+ } else if (is_ipmb_addr(addr) || is_ipmb_bcast_addr(addr)) {
struct ipmi_ipmb_addr *ipmb_addr;
unsigned char ipmb_seq;
long seqid;
@@ -1583,8 +1599,6 @@
spin_lock_irqsave(&(intf->seq_lock), flags);
- ipmi_inc_stat(intf, sent_ipmb_commands);
-
/*
* Create a sequence number with a 1 second
* timeout and 4 retries.
@@ -1606,6 +1620,8 @@
goto out_err;
}
+ ipmi_inc_stat(intf, sent_ipmb_commands);
+
/*
* Store the sequence number in the message,
* so that when the send message response
@@ -1635,7 +1651,7 @@
*/
spin_unlock_irqrestore(&(intf->seq_lock), flags);
}
- } else if (addr->addr_type == IPMI_LAN_ADDR_TYPE) {
+ } else if (is_lan_addr(addr)) {
struct ipmi_lan_addr *lan_addr;
unsigned char ipmb_seq;
long seqid;
@@ -1696,8 +1712,6 @@
spin_lock_irqsave(&(intf->seq_lock), flags);
- ipmi_inc_stat(intf, sent_lan_commands);
-
/*
* Create a sequence number with a 1 second
* timeout and 4 retries.
@@ -1719,6 +1733,8 @@
goto out_err;
}
+ ipmi_inc_stat(intf, sent_lan_commands);
+
/*
* Store the sequence number in the message,
* so that when the send message response
@@ -1937,6 +1953,10 @@
ipmi_get_stat(intf, invalid_events));
out += sprintf(out, "events: %u\n",
ipmi_get_stat(intf, events));
+ out += sprintf(out, "failed rexmit LAN msgs: %u\n",
+ ipmi_get_stat(intf, dropped_rexmit_lan_commands));
+ out += sprintf(out, "failed rexmit IPMB msgs: %u\n",
+ ipmi_get_stat(intf, dropped_rexmit_ipmb_commands));
return (out - ((char *) page));
}
@@ -3264,6 +3284,114 @@
return rv;
}
+/*
+ * This routine will handle "Get Message" command responses with
+ * channels that use an OEM Medium. The message format belongs to
+ * the OEM. See IPMI 2.0 specification, Chapter 6 and
+ * Chapter 22, sections 22.6 and 22.24 for more details.
+ */
+static int handle_oem_get_msg_cmd(ipmi_smi_t intf,
+ struct ipmi_smi_msg *msg)
+{
+ struct cmd_rcvr *rcvr;
+ int rv = 0;
+ unsigned char netfn;
+ unsigned char cmd;
+ unsigned char chan;
+ ipmi_user_t user = NULL;
+ struct ipmi_system_interface_addr *smi_addr;
+ struct ipmi_recv_msg *recv_msg;
+
+ /*
+ * We expect the OEM SW to perform error checking
+ * so we just do some basic sanity checks
+ */
+ if (msg->rsp_size < 4) {
+ /* Message not big enough, just ignore it. */
+ ipmi_inc_stat(intf, invalid_commands);
+ return 0;
+ }
+
+ if (msg->rsp[2] != 0) {
+ /* An error getting the response, just ignore it. */
+ return 0;
+ }
+
+ /*
+ * This is an OEM Message so the OEM needs to know how
+ * handle the message. We do no interpretation.
+ */
+ netfn = msg->rsp[0] >> 2;
+ cmd = msg->rsp[1];
+ chan = msg->rsp[3] & 0xf;
+
+ rcu_read_lock();
+ rcvr = find_cmd_rcvr(intf, netfn, cmd, chan);
+ if (rcvr) {
+ user = rcvr->user;
+ kref_get(&user->refcount);
+ } else
+ user = NULL;
+ rcu_read_unlock();
+
+ if (user == NULL) {
+ /* We didn't find a user, just give up. */
+ ipmi_inc_stat(intf, unhandled_commands);
+
+ /*
+ * Don't do anything with these messages, just allow
+ * them to be freed.
+ */
+
+ rv = 0;
+ } else {
+ /* Deliver the message to the user. */
+ ipmi_inc_stat(intf, handled_commands);
+
+ recv_msg = ipmi_alloc_recv_msg();
+ if (!recv_msg) {
+ /*
+ * We couldn't allocate memory for the
+ * message, so requeue it for handling
+ * later.
+ */
+ rv = 1;
+ kref_put(&user->refcount, free_user);
+ } else {
+ /*
+ * OEM Messages are expected to be delivered via
+ * the system interface to SMS software. We might
+ * need to visit this again depending on OEM
+ * requirements
+ */
+ smi_addr = ((struct ipmi_system_interface_addr *)
+ &(recv_msg->addr));
+ smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ smi_addr->channel = IPMI_BMC_CHANNEL;
+ smi_addr->lun = msg->rsp[0] & 3;
+
+ recv_msg->user = user;
+ recv_msg->user_msg_data = NULL;
+ recv_msg->recv_type = IPMI_OEM_RECV_TYPE;
+ recv_msg->msg.netfn = msg->rsp[0] >> 2;
+ recv_msg->msg.cmd = msg->rsp[1];
+ recv_msg->msg.data = recv_msg->msg_data;
+
+ /*
+ * The message starts at byte 4 which follows the
+ * the Channel Byte in the "GET MESSAGE" command
+ */
+ recv_msg->msg.data_len = msg->rsp_size - 4;
+ memcpy(recv_msg->msg_data,
+ &(msg->rsp[4]),
+ msg->rsp_size - 4);
+ deliver_response(recv_msg);
+ }
+ }
+
+ return rv;
+}
+
static void copy_event_into_recv_msg(struct ipmi_recv_msg *recv_msg,
struct ipmi_smi_msg *msg)
{
@@ -3519,6 +3647,17 @@
goto out;
}
+ /*
+ ** We need to make sure the channels have been initialized.
+ ** The channel_handler routine will set the "curr_channel"
+ ** equal to or greater than IPMI_MAX_CHANNELS when all the
+ ** channels for this interface have been initialized.
+ */
+ if (intf->curr_channel < IPMI_MAX_CHANNELS) {
+ requeue = 1; /* Just put the message back for now */
+ goto out;
+ }
+
switch (intf->channels[chan].medium) {
case IPMI_CHANNEL_MEDIUM_IPMB:
if (msg->rsp[4] & 0x04) {
@@ -3554,11 +3693,20 @@
break;
default:
- /*
- * We don't handle the channel type, so just
- * free the message.
- */
- requeue = 0;
+ /* Check for OEM Channels. Clients had better
+ register for these commands. */
+ if ((intf->channels[chan].medium
+ >= IPMI_CHANNEL_MEDIUM_OEM_MIN)
+ && (intf->channels[chan].medium
+ <= IPMI_CHANNEL_MEDIUM_OEM_MAX)) {
+ requeue = handle_oem_get_msg_cmd(intf, msg);
+ } else {
+ /*
+ * We don't handle the channel type, so just
+ * free the message.
+ */
+ requeue = 0;
+ }
}
} else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
@@ -3730,7 +3878,7 @@
list_add_tail(&msg->link, timeouts);
if (ent->broadcast)
ipmi_inc_stat(intf, timed_out_ipmb_broadcasts);
- else if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE)
+ else if (is_lan_addr(&ent->recv_msg->addr))
ipmi_inc_stat(intf, timed_out_lan_commands);
else
ipmi_inc_stat(intf, timed_out_ipmb_commands);
@@ -3744,15 +3892,17 @@
*/
ent->timeout = MAX_MSG_TIMEOUT;
ent->retries_left--;
- if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE)
- ipmi_inc_stat(intf, retransmitted_lan_commands);
- else
- ipmi_inc_stat(intf, retransmitted_ipmb_commands);
-
smi_msg = smi_from_recv_msg(intf, ent->recv_msg, slot,
ent->seqid);
- if (!smi_msg)
+ if (!smi_msg) {
+ if (is_lan_addr(&ent->recv_msg->addr))
+ ipmi_inc_stat(intf,
+ dropped_rexmit_lan_commands);
+ else
+ ipmi_inc_stat(intf,
+ dropped_rexmit_ipmb_commands);
return;
+ }
spin_unlock_irqrestore(&intf->seq_lock, *flags);
@@ -3764,10 +3914,17 @@
* resent.
*/
handlers = intf->handlers;
- if (handlers)
+ if (handlers) {
+ if (is_lan_addr(&ent->recv_msg->addr))
+ ipmi_inc_stat(intf,
+ retransmitted_lan_commands);
+ else
+ ipmi_inc_stat(intf,
+ retransmitted_ipmb_commands);
+
intf->handlers->sender(intf->send_info,
smi_msg, 0);
- else
+ } else
ipmi_free_smi_msg(smi_msg);
spin_lock_irqsave(&intf->seq_lock, *flags);
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index e58ea4c..2596446 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -82,12 +82,6 @@
#define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a
short timeout */
-/* Bit for BMC global enables. */
-#define IPMI_BMC_RCV_MSG_INTR 0x01
-#define IPMI_BMC_EVT_MSG_INTR 0x02
-#define IPMI_BMC_EVT_MSG_BUFF 0x04
-#define IPMI_BMC_SYS_LOG 0x08
-
enum si_intf_state {
SI_NORMAL,
SI_GETTING_FLAGS,
@@ -220,6 +214,9 @@
OEM2_DATA_AVAIL)
unsigned char msg_flags;
+ /* Does the BMC have an event buffer? */
+ char has_event_buffer;
+
/*
* If set to true, this will request events the next time the
* state machine is idle.
@@ -968,7 +965,8 @@
{
struct smi_info *smi_info = send_info;
- if (atomic_read(&smi_info->stop_operation))
+ if (atomic_read(&smi_info->stop_operation) ||
+ !smi_info->has_event_buffer)
return;
atomic_set(&smi_info->req_events, 1);
@@ -2407,26 +2405,9 @@
};
#endif /* CONFIG_PPC_OF */
-
-static int try_get_dev_id(struct smi_info *smi_info)
+static int wait_for_msg_done(struct smi_info *smi_info)
{
- unsigned char msg[2];
- unsigned char *resp;
- unsigned long resp_len;
enum si_sm_result smi_result;
- int rv = 0;
-
- resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
- if (!resp)
- return -ENOMEM;
-
- /*
- * Do a Get Device ID command, since it comes back with some
- * useful info.
- */
- msg[0] = IPMI_NETFN_APP_REQUEST << 2;
- msg[1] = IPMI_GET_DEVICE_ID_CMD;
- smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
smi_result = smi_info->handlers->event(smi_info->si_sm, 0);
for (;;) {
@@ -2441,16 +2422,39 @@
} else
break;
}
- if (smi_result == SI_SM_HOSED) {
+ if (smi_result == SI_SM_HOSED)
/*
* We couldn't get the state machine to run, so whatever's at
* the port is probably not an IPMI SMI interface.
*/
- rv = -ENODEV;
- goto out;
- }
+ return -ENODEV;
- /* Otherwise, we got some data. */
+ return 0;
+}
+
+static int try_get_dev_id(struct smi_info *smi_info)
+{
+ unsigned char msg[2];
+ unsigned char *resp;
+ unsigned long resp_len;
+ int rv = 0;
+
+ resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+ if (!resp)
+ return -ENOMEM;
+
+ /*
+ * Do a Get Device ID command, since it comes back with some
+ * useful info.
+ */
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_GET_DEVICE_ID_CMD;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv)
+ goto out;
+
resp_len = smi_info->handlers->get_result(smi_info->si_sm,
resp, IPMI_MAX_MSG_LENGTH);
@@ -2462,6 +2466,88 @@
return rv;
}
+static int try_enable_event_buffer(struct smi_info *smi_info)
+{
+ unsigned char msg[3];
+ unsigned char *resp;
+ unsigned long resp_len;
+ int rv = 0;
+
+ resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+ if (!resp)
+ return -ENOMEM;
+
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv) {
+ printk(KERN_WARNING
+ "ipmi_si: Error getting response from get global,"
+ " enables command, the event buffer is not"
+ " enabled.\n");
+ goto out;
+ }
+
+ resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+ resp, IPMI_MAX_MSG_LENGTH);
+
+ if (resp_len < 4 ||
+ resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+ resp[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD ||
+ resp[2] != 0) {
+ printk(KERN_WARNING
+ "ipmi_si: Invalid return from get global"
+ " enables command, cannot enable the event"
+ " buffer.\n");
+ rv = -EINVAL;
+ goto out;
+ }
+
+ if (resp[3] & IPMI_BMC_EVT_MSG_BUFF)
+ /* buffer is already enabled, nothing to do. */
+ goto out;
+
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
+ msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv) {
+ printk(KERN_WARNING
+ "ipmi_si: Error getting response from set global,"
+ " enables command, the event buffer is not"
+ " enabled.\n");
+ goto out;
+ }
+
+ resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+ resp, IPMI_MAX_MSG_LENGTH);
+
+ if (resp_len < 3 ||
+ resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+ resp[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD) {
+ printk(KERN_WARNING
+ "ipmi_si: Invalid return from get global,"
+ "enables command, not enable the event"
+ " buffer.\n");
+ rv = -EINVAL;
+ goto out;
+ }
+
+ if (resp[2] != 0)
+ /*
+ * An error when setting the event buffer bit means
+ * that the event buffer is not supported.
+ */
+ rv = -ENOENT;
+ out:
+ kfree(resp);
+ return rv;
+}
+
static int type_file_read_proc(char *page, char **start, off_t off,
int count, int *eof, void *data)
{
@@ -2847,6 +2933,10 @@
new_smi->intf_num = smi_num;
smi_num++;
+ rv = try_enable_event_buffer(new_smi);
+ if (rv == 0)
+ new_smi->has_event_buffer = 1;
+
/*
* Start clearing the flags before we enable interrupts or the
* timer to avoid racing with the timer.
@@ -2863,7 +2953,7 @@
*/
new_smi->pdev = platform_device_alloc("ipmi_si",
new_smi->intf_num);
- if (rv) {
+ if (!new_smi->pdev) {
printk(KERN_ERR
"ipmi_si_intf:"
" Unable to allocate platform device\n");
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 3586b3b..8f05c38 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -301,33 +301,7 @@
}
#endif
-void __attribute__((weak))
-map_devmem(unsigned long pfn, unsigned long len, pgprot_t prot)
-{
- /* nothing. architectures can override. */
-}
-
-void __attribute__((weak))
-unmap_devmem(unsigned long pfn, unsigned long len, pgprot_t prot)
-{
- /* nothing. architectures can override. */
-}
-
-static void mmap_mem_open(struct vm_area_struct *vma)
-{
- map_devmem(vma->vm_pgoff, vma->vm_end - vma->vm_start,
- vma->vm_page_prot);
-}
-
-static void mmap_mem_close(struct vm_area_struct *vma)
-{
- unmap_devmem(vma->vm_pgoff, vma->vm_end - vma->vm_start,
- vma->vm_page_prot);
-}
-
static struct vm_operations_struct mmap_mem_ops = {
- .open = mmap_mem_open,
- .close = mmap_mem_close,
#ifdef CONFIG_HAVE_IOREMAP_PROT
.access = generic_access_phys
#endif
@@ -362,7 +336,6 @@
vma->vm_pgoff,
size,
vma->vm_page_prot)) {
- unmap_devmem(vma->vm_pgoff, size, vma->vm_page_prot);
return -EAGAIN;
}
return 0;
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 6de020d..b0a6a3e 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -35,7 +35,6 @@
#include <linux/vt_kern.h>
#include <linux/workqueue.h>
#include <linux/kexec.h>
-#include <linux/interrupt.h>
#include <linux/hrtimer.h>
#include <linux/oom.h>
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 2c1d133..08151d4 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -2274,7 +2274,7 @@
continue; /* nothing to display */
}
/* Glyph not found */
- if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) {
+ if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) {
/* In legacy mode use the glyph we get by a 1:1 mapping.
This would make absolutely no sense with Unicode in mind,
but do this for ASCII characters since a font may lack
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index ee19b6e..40bd8c6 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -57,7 +57,7 @@
return v2;
}
-static cycle_t acpi_pm_read(void)
+static cycle_t acpi_pm_read(struct clocksource *cs)
{
return (cycle_t)read_pmtmr();
}
@@ -83,7 +83,7 @@
}
__setup("acpi_pm_good", acpi_pm_good_setup);
-static cycle_t acpi_pm_read_slow(void)
+static cycle_t acpi_pm_read_slow(struct clocksource *cs)
{
return (cycle_t)acpi_pm_read_verified();
}
@@ -156,9 +156,9 @@
unsigned long count, delta;
mach_prepare_counter();
- value1 = clocksource_acpi_pm.read();
+ value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
mach_countup(&count);
- value2 = clocksource_acpi_pm.read();
+ value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
delta = (value2 - value1) & ACPI_PM_MASK;
/* Check that the PMTMR delta is within 5% of what we expect */
@@ -195,9 +195,9 @@
/* "verify" this timing source: */
for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
udelay(100 * j);
- value1 = clocksource_acpi_pm.read();
+ value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
for (i = 0; i < ACPI_PM_READ_CHECKS; i++) {
- value2 = clocksource_acpi_pm.read();
+ value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
if (value2 == value1)
continue;
if (value2 > value1)
diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c
index 8615059..64e528e 100644
--- a/drivers/clocksource/cyclone.c
+++ b/drivers/clocksource/cyclone.c
@@ -19,7 +19,7 @@
int use_cyclone = 0;
static void __iomem *cyclone_ptr;
-static cycle_t read_cyclone(void)
+static cycle_t read_cyclone(struct clocksource *cs)
{
return (cycle_t)readl(cyclone_ptr);
}
diff --git a/drivers/clocksource/scx200_hrt.c b/drivers/clocksource/scx200_hrt.c
index b92da67..27f4d963 100644
--- a/drivers/clocksource/scx200_hrt.c
+++ b/drivers/clocksource/scx200_hrt.c
@@ -43,7 +43,7 @@
/* The base timer frequency, * 27 if selected */
#define HRT_FREQ 1000000
-static cycle_t read_hrt(void)
+static cycle_t read_hrt(struct clocksource *cs)
{
/* Read the timer value */
return (cycle_t) inl(scx200_cb_base + SCx200_TIMER_OFFSET);
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 254f106..01b886e 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -39,7 +39,7 @@
static void __iomem *tcaddr;
-static cycle_t tc_get_cycles(void)
+static cycle_t tc_get_cycles(struct clocksource *cs)
{
unsigned long flags;
u32 lower, upper;
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 28f2c3f..6ad95c8 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -767,11 +767,19 @@
pci_write_config_word(pdev, offset, value);
}
-/* write all or some bits in a dword-register*/
+/*
+ * pci_write_bits32
+ *
+ * edac local routine to do pci_write_config_dword, but adds
+ * a mask parameter. If mask is all ones, ignore the mask.
+ * Otherwise utilize the mask to isolate specified bits
+ *
+ * write all or some bits in a dword-register
+ */
static inline void pci_write_bits32(struct pci_dev *pdev, int offset,
u32 value, u32 mask)
{
- if (mask != 0xffff) {
+ if (mask != 0xffffffff) {
u32 buf;
pci_read_config_dword(pdev, offset, &buf);
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index ca9113e..a7d2c71 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -389,7 +389,7 @@
*/
static void edac_device_workq_function(struct work_struct *work_req)
{
- struct delayed_work *d_work = (struct delayed_work *)work_req;
+ struct delayed_work *d_work = to_delayed_work(work_req);
struct edac_device_ctl_info *edac_dev = to_edac_device_ctl_work(d_work);
mutex_lock(&device_ctls_mutex);
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 25d6694..335b7eb 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -260,7 +260,7 @@
*/
static void edac_mc_workq_function(struct work_struct *work_req)
{
- struct delayed_work *d_work = (struct delayed_work *)work_req;
+ struct delayed_work *d_work = to_delayed_work(work_req);
struct mem_ctl_info *mci = to_edac_mem_ctl_work(d_work);
mutex_lock(&mem_ctls_mutex);
diff --git a/drivers/edac/edac_pci.c b/drivers/edac/edac_pci.c
index 5b150ae..30b585b1 100644
--- a/drivers/edac/edac_pci.c
+++ b/drivers/edac/edac_pci.c
@@ -233,7 +233,7 @@
*/
static void edac_pci_workq_function(struct work_struct *work_req)
{
- struct delayed_work *d_work = (struct delayed_work *)work_req;
+ struct delayed_work *d_work = to_delayed_work(work_req);
struct edac_pci_ctl_info *pci = to_edac_pci_ctl_work(d_work);
int msec;
unsigned long delay;
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 4637a4a..7c8c2d7 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -674,7 +674,7 @@
int row_index;
err_detect = in_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DETECT);
- if (err_detect)
+ if (!err_detect)
return;
mpc85xx_mc_printk(mci, KERN_ERR, "Err Detect Register: %#8.8x\n",
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index d009661..ef87861 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -159,6 +159,9 @@
int drm_setmaster_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
+ if (file_priv->is_master)
+ return 0;
+
if (file_priv->minor->master && file_priv->minor->master != file_priv->master)
return -EINVAL;
@@ -169,6 +172,7 @@
file_priv->minor->master != file_priv->master) {
mutex_lock(&dev->struct_mutex);
file_priv->minor->master = drm_master_get(file_priv->master);
+ file_priv->is_master = 1;
mutex_unlock(&dev->struct_mutex);
}
@@ -178,10 +182,15 @@
int drm_dropmaster_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
- if (!file_priv->master)
+ if (!file_priv->is_master)
return -EINVAL;
+
+ if (!file_priv->minor->master)
+ return -EINVAL;
+
mutex_lock(&dev->struct_mutex);
drm_master_put(&file_priv->minor->master);
+ file_priv->is_master = 0;
mutex_unlock(&dev->struct_mutex);
return 0;
}
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index bc0c6849..022876a 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -132,6 +132,7 @@
*/
static void drm_sysfs_device_release(struct device *dev)
{
+ memset(dev, 0, sizeof(struct device));
return;
}
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 3750d80..473a8f7 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -446,6 +446,9 @@
uint32_t tiling_mode;
uint32_t stride;
+ /** Record of address bit 17 of each page at last unbind. */
+ long *bit_17;
+
/** AGP mapping type (AGP_USER_MEMORY or AGP_USER_CACHED_MEMORY */
uint32_t agp_type;
@@ -635,9 +638,13 @@
void i915_gem_detach_phys_object(struct drm_device *dev,
struct drm_gem_object *obj);
void i915_gem_free_all_phys_object(struct drm_device *dev);
+int i915_gem_object_get_pages(struct drm_gem_object *obj);
+void i915_gem_object_put_pages(struct drm_gem_object *obj);
/* i915_gem_tiling.c */
void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
+void i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj);
+void i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj);
/* i915_gem_debug.c */
void i915_gem_dump_object(struct drm_gem_object *obj, int len,
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 1449b45..4642115 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -43,8 +43,6 @@
uint64_t offset,
uint64_t size);
static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj);
-static int i915_gem_object_get_pages(struct drm_gem_object *obj);
-static void i915_gem_object_put_pages(struct drm_gem_object *obj);
static int i915_gem_object_wait_rendering(struct drm_gem_object *obj);
static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj,
unsigned alignment);
@@ -143,15 +141,27 @@
int length)
{
char __iomem *vaddr;
- int ret;
+ int unwritten;
vaddr = kmap_atomic(pages[page_base >> PAGE_SHIFT], KM_USER0);
if (vaddr == NULL)
return -ENOMEM;
- ret = __copy_to_user_inatomic(data, vaddr + page_offset, length);
+ unwritten = __copy_to_user_inatomic(data, vaddr + page_offset, length);
kunmap_atomic(vaddr, KM_USER0);
- return ret;
+ if (unwritten)
+ return -EFAULT;
+
+ return 0;
+}
+
+static int i915_gem_object_needs_bit17_swizzle(struct drm_gem_object *obj)
+{
+ drm_i915_private_t *dev_priv = obj->dev->dev_private;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+ return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 &&
+ obj_priv->tiling_mode != I915_TILING_NONE;
}
static inline int
@@ -181,6 +191,64 @@
return 0;
}
+static inline int
+slow_shmem_bit17_copy(struct page *gpu_page,
+ int gpu_offset,
+ struct page *cpu_page,
+ int cpu_offset,
+ int length,
+ int is_read)
+{
+ char *gpu_vaddr, *cpu_vaddr;
+
+ /* Use the unswizzled path if this page isn't affected. */
+ if ((page_to_phys(gpu_page) & (1 << 17)) == 0) {
+ if (is_read)
+ return slow_shmem_copy(cpu_page, cpu_offset,
+ gpu_page, gpu_offset, length);
+ else
+ return slow_shmem_copy(gpu_page, gpu_offset,
+ cpu_page, cpu_offset, length);
+ }
+
+ gpu_vaddr = kmap_atomic(gpu_page, KM_USER0);
+ if (gpu_vaddr == NULL)
+ return -ENOMEM;
+
+ cpu_vaddr = kmap_atomic(cpu_page, KM_USER1);
+ if (cpu_vaddr == NULL) {
+ kunmap_atomic(gpu_vaddr, KM_USER0);
+ return -ENOMEM;
+ }
+
+ /* Copy the data, XORing A6 with A17 (1). The user already knows he's
+ * XORing with the other bits (A9 for Y, A9 and A10 for X)
+ */
+ while (length > 0) {
+ int cacheline_end = ALIGN(gpu_offset + 1, 64);
+ int this_length = min(cacheline_end - gpu_offset, length);
+ int swizzled_gpu_offset = gpu_offset ^ 64;
+
+ if (is_read) {
+ memcpy(cpu_vaddr + cpu_offset,
+ gpu_vaddr + swizzled_gpu_offset,
+ this_length);
+ } else {
+ memcpy(gpu_vaddr + swizzled_gpu_offset,
+ cpu_vaddr + cpu_offset,
+ this_length);
+ }
+ cpu_offset += this_length;
+ gpu_offset += this_length;
+ length -= this_length;
+ }
+
+ kunmap_atomic(cpu_vaddr, KM_USER1);
+ kunmap_atomic(gpu_vaddr, KM_USER0);
+
+ return 0;
+}
+
/**
* This is the fast shmem pread path, which attempts to copy_from_user directly
* from the backing pages of the object to the user's address space. On a
@@ -269,6 +337,7 @@
int page_length;
int ret;
uint64_t data_ptr = args->data_ptr;
+ int do_bit17_swizzling;
remain = args->size;
@@ -286,13 +355,15 @@
down_read(&mm->mmap_sem);
pinned_pages = get_user_pages(current, mm, (uintptr_t)args->data_ptr,
- num_pages, 0, 0, user_pages, NULL);
+ num_pages, 1, 0, user_pages, NULL);
up_read(&mm->mmap_sem);
if (pinned_pages < num_pages) {
ret = -EFAULT;
goto fail_put_user_pages;
}
+ do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
+
mutex_lock(&dev->struct_mutex);
ret = i915_gem_object_get_pages(obj);
@@ -327,11 +398,20 @@
if ((data_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - data_page_offset;
- ret = slow_shmem_copy(user_pages[data_page_index],
- data_page_offset,
- obj_priv->pages[shmem_page_index],
- shmem_page_offset,
- page_length);
+ if (do_bit17_swizzling) {
+ ret = slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index],
+ shmem_page_offset,
+ user_pages[data_page_index],
+ data_page_offset,
+ page_length,
+ 1);
+ } else {
+ ret = slow_shmem_copy(user_pages[data_page_index],
+ data_page_offset,
+ obj_priv->pages[shmem_page_index],
+ shmem_page_offset,
+ page_length);
+ }
if (ret)
goto fail_put_pages;
@@ -383,9 +463,14 @@
return -EINVAL;
}
- ret = i915_gem_shmem_pread_fast(dev, obj, args, file_priv);
- if (ret != 0)
+ if (i915_gem_object_needs_bit17_swizzle(obj)) {
ret = i915_gem_shmem_pread_slow(dev, obj, args, file_priv);
+ } else {
+ ret = i915_gem_shmem_pread_fast(dev, obj, args, file_priv);
+ if (ret != 0)
+ ret = i915_gem_shmem_pread_slow(dev, obj, args,
+ file_priv);
+ }
drm_gem_object_unreference(obj);
@@ -727,6 +812,7 @@
int page_length;
int ret;
uint64_t data_ptr = args->data_ptr;
+ int do_bit17_swizzling;
remain = args->size;
@@ -751,6 +837,8 @@
goto fail_put_user_pages;
}
+ do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
+
mutex_lock(&dev->struct_mutex);
ret = i915_gem_object_get_pages(obj);
@@ -785,11 +873,20 @@
if ((data_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - data_page_offset;
- ret = slow_shmem_copy(obj_priv->pages[shmem_page_index],
- shmem_page_offset,
- user_pages[data_page_index],
- data_page_offset,
- page_length);
+ if (do_bit17_swizzling) {
+ ret = slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index],
+ shmem_page_offset,
+ user_pages[data_page_index],
+ data_page_offset,
+ page_length,
+ 0);
+ } else {
+ ret = slow_shmem_copy(obj_priv->pages[shmem_page_index],
+ shmem_page_offset,
+ user_pages[data_page_index],
+ data_page_offset,
+ page_length);
+ }
if (ret)
goto fail_put_pages;
@@ -854,6 +951,8 @@
ret = i915_gem_gtt_pwrite_slow(dev, obj, args,
file_priv);
}
+ } else if (i915_gem_object_needs_bit17_swizzle(obj)) {
+ ret = i915_gem_shmem_pwrite_slow(dev, obj, args, file_priv);
} else {
ret = i915_gem_shmem_pwrite_fast(dev, obj, args, file_priv);
if (ret == -EFAULT) {
@@ -1285,7 +1384,7 @@
return 0;
}
-static void
+void
i915_gem_object_put_pages(struct drm_gem_object *obj)
{
struct drm_i915_gem_object *obj_priv = obj->driver_private;
@@ -1297,6 +1396,9 @@
if (--obj_priv->pages_refcount != 0)
return;
+ if (obj_priv->tiling_mode != I915_TILING_NONE)
+ i915_gem_object_save_bit_17_swizzle(obj);
+
for (i = 0; i < page_count; i++)
if (obj_priv->pages[i] != NULL) {
if (obj_priv->dirty)
@@ -1494,8 +1596,19 @@
if (obj->write_domain != 0)
i915_gem_object_move_to_flushing(obj);
- else
+ else {
+ /* Take a reference on the object so it won't be
+ * freed while the spinlock is held. The list
+ * protection for this spinlock is safe when breaking
+ * the lock like this since the next thing we do
+ * is just get the head of the list again.
+ */
+ drm_gem_object_reference(obj);
i915_gem_object_move_to_inactive(obj);
+ spin_unlock(&dev_priv->mm.active_list_lock);
+ drm_gem_object_unreference(obj);
+ spin_lock(&dev_priv->mm.active_list_lock);
+ }
}
out:
spin_unlock(&dev_priv->mm.active_list_lock);
@@ -1884,7 +1997,7 @@
return ret;
}
-static int
+int
i915_gem_object_get_pages(struct drm_gem_object *obj)
{
struct drm_i915_gem_object *obj_priv = obj->driver_private;
@@ -1922,6 +2035,10 @@
}
obj_priv->pages[i] = page;
}
+
+ if (obj_priv->tiling_mode != I915_TILING_NONE)
+ i915_gem_object_do_bit_17_swizzle(obj);
+
return 0;
}
@@ -3002,13 +3119,13 @@
drm_free(*relocs, reloc_count * sizeof(**relocs),
DRM_MEM_DRIVER);
*relocs = NULL;
- return ret;
+ return -EFAULT;
}
reloc_index += exec_list[i].relocation_count;
}
- return ret;
+ return 0;
}
static int
@@ -3017,23 +3134,28 @@
struct drm_i915_gem_relocation_entry *relocs)
{
uint32_t reloc_count = 0, i;
- int ret;
+ int ret = 0;
for (i = 0; i < buffer_count; i++) {
struct drm_i915_gem_relocation_entry __user *user_relocs;
+ int unwritten;
user_relocs = (void __user *)(uintptr_t)exec_list[i].relocs_ptr;
- if (ret == 0) {
- ret = copy_to_user(user_relocs,
- &relocs[reloc_count],
- exec_list[i].relocation_count *
- sizeof(*relocs));
+ unwritten = copy_to_user(user_relocs,
+ &relocs[reloc_count],
+ exec_list[i].relocation_count *
+ sizeof(*relocs));
+
+ if (unwritten) {
+ ret = -EFAULT;
+ goto err;
}
reloc_count += exec_list[i].relocation_count;
}
+err:
drm_free(relocs, reloc_count * sizeof(*relocs), DRM_MEM_DRIVER);
return ret;
@@ -3243,7 +3365,7 @@
exec_offset = exec_list[args->buffer_count - 1].offset;
#if WATCH_EXEC
- i915_gem_dump_object(object_list[args->buffer_count - 1],
+ i915_gem_dump_object(batch_obj,
args->batch_len,
__func__,
~0);
@@ -3308,10 +3430,12 @@
(uintptr_t) args->buffers_ptr,
exec_list,
sizeof(*exec_list) * args->buffer_count);
- if (ret)
+ if (ret) {
+ ret = -EFAULT;
DRM_ERROR("failed to copy %d exec entries "
"back to user (%d)\n",
args->buffer_count, ret);
+ }
}
/* Copy the updated relocations out regardless of current error
@@ -3593,6 +3717,7 @@
i915_gem_free_mmap_offset(obj);
drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER);
+ kfree(obj_priv->bit_17);
drm_free(obj->driver_private, 1, DRM_MEM_DRIVER);
}
diff --git a/drivers/gpu/drm/i915/i915_gem_debugfs.c b/drivers/gpu/drm/i915/i915_gem_debugfs.c
index a1ac0c5..986f108 100644
--- a/drivers/gpu/drm/i915/i915_gem_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_gem_debugfs.c
@@ -234,6 +234,96 @@
return 0;
}
+static void i915_dump_pages(struct seq_file *m, struct page **pages, int page_count)
+{
+ int page, i;
+ uint32_t *mem;
+
+ for (page = 0; page < page_count; page++) {
+ mem = kmap(pages[page]);
+ for (i = 0; i < PAGE_SIZE; i += 4)
+ seq_printf(m, "%08x : %08x\n", i, mem[i / 4]);
+ kunmap(pages[page]);
+ }
+}
+
+static int i915_batchbuffer_info(struct seq_file *m, void *data)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_gem_object *obj;
+ struct drm_i915_gem_object *obj_priv;
+ int ret;
+
+ spin_lock(&dev_priv->mm.active_list_lock);
+
+ list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
+ obj = obj_priv->obj;
+ if (obj->read_domains & I915_GEM_DOMAIN_COMMAND) {
+ ret = i915_gem_object_get_pages(obj);
+ if (ret) {
+ DRM_ERROR("Failed to get pages: %d\n", ret);
+ spin_unlock(&dev_priv->mm.active_list_lock);
+ return ret;
+ }
+
+ seq_printf(m, "--- gtt_offset = 0x%08x\n", obj_priv->gtt_offset);
+ i915_dump_pages(m, obj_priv->pages, obj->size / PAGE_SIZE);
+
+ i915_gem_object_put_pages(obj);
+ }
+ }
+
+ spin_unlock(&dev_priv->mm.active_list_lock);
+
+ return 0;
+}
+
+static int i915_ringbuffer_data(struct seq_file *m, void *data)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ u8 *virt;
+ uint32_t *ptr, off;
+
+ if (!dev_priv->ring.ring_obj) {
+ seq_printf(m, "No ringbuffer setup\n");
+ return 0;
+ }
+
+ virt = dev_priv->ring.virtual_start;
+
+ for (off = 0; off < dev_priv->ring.Size; off += 4) {
+ ptr = (uint32_t *)(virt + off);
+ seq_printf(m, "%08x : %08x\n", off, *ptr);
+ }
+
+ return 0;
+}
+
+static int i915_ringbuffer_info(struct seq_file *m, void *data)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ unsigned int head, tail, mask;
+
+ head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
+ tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
+ mask = dev_priv->ring.tail_mask;
+
+ seq_printf(m, "RingHead : %08x\n", head);
+ seq_printf(m, "RingTail : %08x\n", tail);
+ seq_printf(m, "RingMask : %08x\n", mask);
+ seq_printf(m, "RingSize : %08lx\n", dev_priv->ring.Size);
+ seq_printf(m, "Acthd : %08x\n", I915_READ(IS_I965G(dev) ? ACTHD_I965 : ACTHD));
+
+ return 0;
+}
+
+
static struct drm_info_list i915_gem_debugfs_list[] = {
{"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST},
{"i915_gem_flushing", i915_gem_object_list_info, 0, (void *) FLUSHING_LIST},
@@ -243,6 +333,9 @@
{"i915_gem_fence_regs", i915_gem_fence_regs_info, 0},
{"i915_gem_interrupt", i915_interrupt_info, 0},
{"i915_gem_hws", i915_hws_info, 0},
+ {"i915_ringbuffer_data", i915_ringbuffer_data, 0},
+ {"i915_ringbuffer_info", i915_ringbuffer_info, 0},
+ {"i915_batchbuffers", i915_batchbuffer_info, 0},
};
#define I915_GEM_DEBUGFS_ENTRIES ARRAY_SIZE(i915_gem_debugfs_list)
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 6be3f92..f27e523 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -25,6 +25,8 @@
*
*/
+#include "linux/string.h"
+#include "linux/bitops.h"
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
@@ -127,8 +129,8 @@
swizzle_y = I915_BIT_6_SWIZZLE_9_11;
} else {
/* Bit 17 swizzling by the CPU in addition. */
- swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
- swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
+ swizzle_x = I915_BIT_6_SWIZZLE_9_10_17;
+ swizzle_y = I915_BIT_6_SWIZZLE_9_17;
}
break;
}
@@ -288,6 +290,19 @@
args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x;
else
args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y;
+
+ /* Hide bit 17 swizzling from the user. This prevents old Mesa
+ * from aborting the application on sw fallbacks to bit 17,
+ * and we use the pread/pwrite bit17 paths to swizzle for it.
+ * If there was a user that was relying on the swizzle
+ * information for drm_intel_bo_map()ed reads/writes this would
+ * break it, but we don't have any of those.
+ */
+ if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
+ args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
+ if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
+ args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
+
/* If we can't handle the swizzling, make it untiled. */
if (args->swizzle_mode == I915_BIT_6_SWIZZLE_UNKNOWN) {
args->tiling_mode = I915_TILING_NONE;
@@ -354,8 +369,100 @@
DRM_ERROR("unknown tiling mode\n");
}
+ /* Hide bit 17 from the user -- see comment in i915_gem_set_tiling */
+ if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
+ args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
+ if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
+ args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
+
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
return 0;
}
+
+/**
+ * Swap every 64 bytes of this page around, to account for it having a new
+ * bit 17 of its physical address and therefore being interpreted differently
+ * by the GPU.
+ */
+static int
+i915_gem_swizzle_page(struct page *page)
+{
+ char *vaddr;
+ int i;
+ char temp[64];
+
+ vaddr = kmap(page);
+ if (vaddr == NULL)
+ return -ENOMEM;
+
+ for (i = 0; i < PAGE_SIZE; i += 128) {
+ memcpy(temp, &vaddr[i], 64);
+ memcpy(&vaddr[i], &vaddr[i + 64], 64);
+ memcpy(&vaddr[i + 64], temp, 64);
+ }
+
+ kunmap(page);
+
+ return 0;
+}
+
+void
+i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ int page_count = obj->size >> PAGE_SHIFT;
+ int i;
+
+ if (dev_priv->mm.bit_6_swizzle_x != I915_BIT_6_SWIZZLE_9_10_17)
+ return;
+
+ if (obj_priv->bit_17 == NULL)
+ return;
+
+ for (i = 0; i < page_count; i++) {
+ char new_bit_17 = page_to_phys(obj_priv->pages[i]) >> 17;
+ if ((new_bit_17 & 0x1) !=
+ (test_bit(i, obj_priv->bit_17) != 0)) {
+ int ret = i915_gem_swizzle_page(obj_priv->pages[i]);
+ if (ret != 0) {
+ DRM_ERROR("Failed to swizzle page\n");
+ return;
+ }
+ set_page_dirty(obj_priv->pages[i]);
+ }
+ }
+}
+
+void
+i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ int page_count = obj->size >> PAGE_SHIFT;
+ int i;
+
+ if (dev_priv->mm.bit_6_swizzle_x != I915_BIT_6_SWIZZLE_9_10_17)
+ return;
+
+ if (obj_priv->bit_17 == NULL) {
+ obj_priv->bit_17 = kmalloc(BITS_TO_LONGS(page_count) *
+ sizeof(long), GFP_KERNEL);
+ if (obj_priv->bit_17 == NULL) {
+ DRM_ERROR("Failed to allocate memory for bit 17 "
+ "record\n");
+ return;
+ }
+ }
+
+ for (i = 0; i < page_count; i++) {
+ if (page_to_phys(obj_priv->pages[i]) & (1 << 17))
+ __set_bit(i, obj_priv->bit_17);
+ else
+ __clear_bit(i, obj_priv->bit_17);
+ }
+}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 64773ce..c2c8e95 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -367,6 +367,7 @@
.p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX },
.p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
.p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
+ .find_pll = intel_find_best_PLL,
},
{ /* INTEL_LIMIT_IGD_LVDS */
.dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
@@ -380,6 +381,7 @@
/* IGD only supports single-channel mode. */
.p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
.p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW },
+ .find_pll = intel_find_best_PLL,
},
};
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index b7f0ebe..3e094be 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -864,8 +864,8 @@
static struct sysrq_key_op sysrq_intelfb_restore_op = {
.handler = intelfb_sysrq,
- .help_msg = "force fb",
- .action_msg = "force restore of fb console",
+ .help_msg = "force-fb(G)",
+ .action_msg = "Restore framebuffer console",
};
int intelfb_probe(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index b06a4a3..5503742 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -38,7 +38,7 @@
struct intel_hdmi_priv {
u32 sdvox_reg;
u32 save_SDVOX;
- int has_hdmi_sink;
+ bool has_hdmi_sink;
};
static void intel_hdmi_mode_set(struct drm_encoder *encoder,
@@ -128,6 +128,22 @@
return true;
}
+static void
+intel_hdmi_sink_detect(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
+ struct edid *edid = NULL;
+
+ edid = drm_get_edid(&intel_output->base,
+ &intel_output->ddc_bus->adapter);
+ if (edid != NULL) {
+ hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
+ kfree(edid);
+ intel_output->base.display_info.raw_edid = NULL;
+ }
+}
+
static enum drm_connector_status
intel_hdmi_detect(struct drm_connector *connector)
{
@@ -158,9 +174,10 @@
return connector_status_unknown;
}
- if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0)
+ if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) {
+ intel_hdmi_sink_detect(connector);
return connector_status_connected;
- else
+ } else
return connector_status_disconnected;
}
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 7b31f55..9913651 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1357,6 +1357,23 @@
intel_sdvo_read_response(intel_output, &response, 2);
}
+static void
+intel_sdvo_hdmi_sink_detect(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct edid *edid = NULL;
+
+ intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
+ edid = drm_get_edid(&intel_output->base,
+ &intel_output->ddc_bus->adapter);
+ if (edid != NULL) {
+ sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid);
+ kfree(edid);
+ intel_output->base.display_info.raw_edid = NULL;
+ }
+}
+
static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector)
{
u8 response[2];
@@ -1371,9 +1388,10 @@
if (status != SDVO_CMD_STATUS_SUCCESS)
return connector_status_unknown;
- if ((response[0] != 0) || (response[1] != 0))
+ if ((response[0] != 0) || (response[1] != 0)) {
+ intel_sdvo_hdmi_sink_detect(connector);
return connector_status_connected;
- else
+ } else
return connector_status_disconnected;
}
diff --git a/drivers/gpu/drm/via/via_dma.c b/drivers/gpu/drm/via/via_dma.c
index 7a339db..bfb92d2 100644
--- a/drivers/gpu/drm/via/via_dma.c
+++ b/drivers/gpu/drm/via/via_dma.c
@@ -481,11 +481,13 @@
{
int count = 10000000;
- while (!(VIA_READ(VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && count--);
+ while (!(VIA_READ(VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && --count)
+ ;
- while (count-- && (VIA_READ(VIA_REG_STATUS) &
+ while (count && (VIA_READ(VIA_REG_STATUS) &
(VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY |
- VIA_3D_ENG_BUSY))) ;
+ VIA_3D_ENG_BUSY)))
+ --count;
return count;
}
@@ -705,7 +707,7 @@
switch (d_siz->func) {
case VIA_CMDBUF_SPACE:
while (((tmp_size = via_cmdbuf_space(dev_priv)) < d_siz->size)
- && count--) {
+ && --count) {
if (!d_siz->wait) {
break;
}
@@ -717,7 +719,7 @@
break;
case VIA_CMDBUF_LAG:
while (((tmp_size = via_cmdbuf_lag(dev_priv)) > d_siz->size)
- && count--) {
+ && --count) {
if (!d_siz->wait) {
break;
}
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 0e8a918..d73f5f4 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -692,6 +692,16 @@
These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.
+config SENSORS_SHT15
+ tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
+ depends on GENERIC_GPIO
+ help
+ If you say yes here you get support for the Sensiron SHT10, SHT11,
+ SHT15, SHT71, SHT75 humidity and temperature sensors.
+
+ This driver can also be built as a module. If so, the module
+ will be called sht15.
+
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
depends on PCI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 1d37578..0ae2698 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -76,6 +76,7 @@
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+obj-$(CONFIG_SENSORS_SHT15) += sht15.o
obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index 55d3dc5..abca7e9 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -34,7 +34,6 @@
#include <linux/wait.h>
#include <linux/poll.h>
#include <linux/freezer.h>
-#include <linux/version.h>
#include <linux/uaccess.h>
#include <linux/leds.h>
#include <acpi/acpi_drivers.h>
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
new file mode 100644
index 0000000..6cbdc2f
--- /dev/null
+++ b/drivers/hwmon/sht15.c
@@ -0,0 +1,692 @@
+/*
+ * sht15.c - support for the SHT15 Temperature and Humidity Sensor
+ *
+ * Copyright (c) 2009 Jonathan Cameron
+ *
+ * Copyright (c) 2007 Wouter Horre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Currently ignoring checksum on readings.
+ * Default resolution only (14bit temp, 12bit humidity)
+ * Ignoring battery status.
+ * Heater not enabled.
+ * Timings are all conservative.
+ *
+ * Data sheet available (1/2009) at
+ * http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf
+ *
+ * Regulator supply name = vcc
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include <linux/sht15.h>
+#include <linux/regulator/consumer.h>
+#include <asm/atomic.h>
+
+#define SHT15_MEASURE_TEMP 3
+#define SHT15_MEASURE_RH 5
+
+#define SHT15_READING_NOTHING 0
+#define SHT15_READING_TEMP 1
+#define SHT15_READING_HUMID 2
+
+/* Min timings in nsecs */
+#define SHT15_TSCKL 100 /* clock low */
+#define SHT15_TSCKH 100 /* clock high */
+#define SHT15_TSU 150 /* data setup time */
+
+/**
+ * struct sht15_temppair - elements of voltage dependant temp calc
+ * @vdd: supply voltage in microvolts
+ * @d1: see data sheet
+ */
+struct sht15_temppair {
+ int vdd; /* microvolts */
+ int d1;
+};
+
+/* Table 9 from data sheet - relates temperature calculation
+ * to supply voltage.
+ */
+static const struct sht15_temppair temppoints[] = {
+ { 2500000, -39400 },
+ { 3000000, -39600 },
+ { 3500000, -39700 },
+ { 4000000, -39800 },
+ { 5000000, -40100 },
+};
+
+/**
+ * struct sht15_data - device instance specific data
+ * @pdata: platform data (gpio's etc)
+ * @read_work: bh of interrupt handler
+ * @wait_queue: wait queue for getting values from device
+ * @val_temp: last temperature value read from device
+ * @val_humid: last humidity value read from device
+ * @flag: status flag used to identify what the last request was
+ * @valid: are the current stored values valid (start condition)
+ * @last_updat: time of last update
+ * @read_lock: mutex to ensure only one read in progress
+ * at a time.
+ * @dev: associate device structure
+ * @hwmon_dev: device associated with hwmon subsystem
+ * @reg: associated regulator (if specified)
+ * @nb: notifier block to handle notifications of voltage changes
+ * @supply_uV: local copy of supply voltage used to allow
+ * use of regulator consumer if available
+ * @supply_uV_valid: indicates that an updated value has not yet
+ * been obtained from the regulator and so any calculations
+ * based upon it will be invalid.
+ * @update_supply_work: work struct that is used to update the supply_uV
+ * @interrupt_handled: flag used to indicate a hander has been scheduled
+ */
+struct sht15_data {
+ struct sht15_platform_data *pdata;
+ struct work_struct read_work;
+ wait_queue_head_t wait_queue;
+ uint16_t val_temp;
+ uint16_t val_humid;
+ u8 flag;
+ u8 valid;
+ unsigned long last_updat;
+ struct mutex read_lock;
+ struct device *dev;
+ struct device *hwmon_dev;
+ struct regulator *reg;
+ struct notifier_block nb;
+ int supply_uV;
+ int supply_uV_valid;
+ struct work_struct update_supply_work;
+ atomic_t interrupt_handled;
+};
+
+/**
+ * sht15_connection_reset() - reset the comms interface
+ * @data: sht15 specific data
+ *
+ * This implements section 3.4 of the data sheet
+ */
+static void sht15_connection_reset(struct sht15_data *data)
+{
+ int i;
+ gpio_direction_output(data->pdata->gpio_data, 1);
+ ndelay(SHT15_TSCKL);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ for (i = 0; i < 9; ++i) {
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ }
+}
+/**
+ * sht15_send_bit() - send an individual bit to the device
+ * @data: device state data
+ * @val: value of bit to be sent
+ **/
+static inline void sht15_send_bit(struct sht15_data *data, int val)
+{
+
+ gpio_set_value(data->pdata->gpio_data, val);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL); /* clock low time */
+}
+
+/**
+ * sht15_transmission_start() - specific sequence for new transmission
+ *
+ * @data: device state data
+ * Timings for this are not documented on the data sheet, so very
+ * conservative ones used in implementation. This implements
+ * figure 12 on the data sheet.
+ **/
+static void sht15_transmission_start(struct sht15_data *data)
+{
+ /* ensure data is high and output */
+ gpio_direction_output(data->pdata->gpio_data, 1);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_data, 0);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_data, 1);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+}
+/**
+ * sht15_send_byte() - send a single byte to the device
+ * @data: device state
+ * @byte: value to be sent
+ **/
+static void sht15_send_byte(struct sht15_data *data, u8 byte)
+{
+ int i;
+ for (i = 0; i < 8; i++) {
+ sht15_send_bit(data, !!(byte & 0x80));
+ byte <<= 1;
+ }
+}
+/**
+ * sht15_wait_for_response() - checks for ack from device
+ * @data: device state
+ **/
+static int sht15_wait_for_response(struct sht15_data *data)
+{
+ gpio_direction_input(data->pdata->gpio_data);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ if (gpio_get_value(data->pdata->gpio_data)) {
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ dev_err(data->dev, "Command not acknowledged\n");
+ sht15_connection_reset(data);
+ return -EIO;
+ }
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ return 0;
+}
+
+/**
+ * sht15_send_cmd() - Sends a command to the device.
+ * @data: device state
+ * @cmd: command byte to be sent
+ *
+ * On entry, sck is output low, data is output pull high
+ * and the interrupt disabled.
+ **/
+static int sht15_send_cmd(struct sht15_data *data, u8 cmd)
+{
+ int ret = 0;
+ sht15_transmission_start(data);
+ sht15_send_byte(data, cmd);
+ ret = sht15_wait_for_response(data);
+ return ret;
+}
+/**
+ * sht15_update_single_val() - get a new value from device
+ * @data: device instance specific data
+ * @command: command sent to request value
+ * @timeout_msecs: timeout after which comms are assumed
+ * to have failed are reset.
+ **/
+static inline int sht15_update_single_val(struct sht15_data *data,
+ int command,
+ int timeout_msecs)
+{
+ int ret;
+ ret = sht15_send_cmd(data, command);
+ if (ret)
+ return ret;
+
+ gpio_direction_input(data->pdata->gpio_data);
+ atomic_set(&data->interrupt_handled, 0);
+
+ enable_irq(gpio_to_irq(data->pdata->gpio_data));
+ if (gpio_get_value(data->pdata->gpio_data) == 0) {
+ disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
+ /* Only relevant if the interrupt hasn't occured. */
+ if (!atomic_read(&data->interrupt_handled))
+ schedule_work(&data->read_work);
+ }
+ ret = wait_event_timeout(data->wait_queue,
+ (data->flag == SHT15_READING_NOTHING),
+ msecs_to_jiffies(timeout_msecs));
+ if (ret == 0) {/* timeout occurred */
+ disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));;
+ sht15_connection_reset(data);
+ return -ETIME;
+ }
+ return 0;
+}
+
+/**
+ * sht15_update_vals() - get updated readings from device if too old
+ * @data: device state
+ **/
+static int sht15_update_vals(struct sht15_data *data)
+{
+ int ret = 0;
+ int timeout = HZ;
+
+ mutex_lock(&data->read_lock);
+ if (time_after(jiffies, data->last_updat + timeout)
+ || !data->valid) {
+ data->flag = SHT15_READING_HUMID;
+ ret = sht15_update_single_val(data, SHT15_MEASURE_RH, 160);
+ if (ret)
+ goto error_ret;
+ data->flag = SHT15_READING_TEMP;
+ ret = sht15_update_single_val(data, SHT15_MEASURE_TEMP, 400);
+ if (ret)
+ goto error_ret;
+ data->valid = 1;
+ data->last_updat = jiffies;
+ }
+error_ret:
+ mutex_unlock(&data->read_lock);
+
+ return ret;
+}
+
+/**
+ * sht15_calc_temp() - convert the raw reading to a temperature
+ * @data: device state
+ *
+ * As per section 4.3 of the data sheet.
+ **/
+static inline int sht15_calc_temp(struct sht15_data *data)
+{
+ int d1 = 0;
+ int i;
+
+ for (i = 1; i < ARRAY_SIZE(temppoints) - 1; i++)
+ /* Find pointer to interpolate */
+ if (data->supply_uV > temppoints[i - 1].vdd) {
+ d1 = (data->supply_uV/1000 - temppoints[i - 1].vdd)
+ * (temppoints[i].d1 - temppoints[i - 1].d1)
+ / (temppoints[i].vdd - temppoints[i - 1].vdd)
+ + temppoints[i - 1].d1;
+ break;
+ }
+
+ return data->val_temp*10 + d1;
+}
+
+/**
+ * sht15_calc_humid() - using last temperature convert raw to humid
+ * @data: device state
+ *
+ * This is the temperature compensated version as per section 4.2 of
+ * the data sheet.
+ **/
+static inline int sht15_calc_humid(struct sht15_data *data)
+{
+ int RHlinear; /* milli percent */
+ int temp = sht15_calc_temp(data);
+
+ const int c1 = -4;
+ const int c2 = 40500; /* x 10 ^ -6 */
+ const int c3 = 2800; /* x10 ^ -9 */
+
+ RHlinear = c1*1000
+ + c2 * data->val_humid/1000
+ + (data->val_humid * data->val_humid * c3)/1000000;
+ return (temp - 25000) * (10000 + 800 * data->val_humid)
+ / 1000000 + RHlinear;
+}
+
+static ssize_t sht15_show_temp(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ struct sht15_data *data = dev_get_drvdata(dev);
+
+ /* Technically no need to read humidity as well */
+ ret = sht15_update_vals(data);
+
+ return ret ? ret : sprintf(buf, "%d\n",
+ sht15_calc_temp(data));
+}
+
+static ssize_t sht15_show_humidity(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ struct sht15_data *data = dev_get_drvdata(dev);
+
+ ret = sht15_update_vals(data);
+
+ return ret ? ret : sprintf(buf, "%d\n", sht15_calc_humid(data));
+
+};
+static ssize_t show_name(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ return sprintf(buf, "%s\n", pdev->name);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input,
+ S_IRUGO, sht15_show_temp,
+ NULL, 0);
+static SENSOR_DEVICE_ATTR(humidity1_input,
+ S_IRUGO, sht15_show_humidity,
+ NULL, 0);
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static struct attribute *sht15_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_humidity1_input.dev_attr.attr,
+ &dev_attr_name.attr,
+ NULL,
+};
+
+static const struct attribute_group sht15_attr_group = {
+ .attrs = sht15_attrs,
+};
+
+static irqreturn_t sht15_interrupt_fired(int irq, void *d)
+{
+ struct sht15_data *data = d;
+ /* First disable the interrupt */
+ disable_irq_nosync(irq);
+ atomic_inc(&data->interrupt_handled);
+ /* Then schedule a reading work struct */
+ if (data->flag != SHT15_READING_NOTHING)
+ schedule_work(&data->read_work);
+ return IRQ_HANDLED;
+}
+
+/* Each byte of data is acknowledged by pulling the data line
+ * low for one clock pulse.
+ */
+static void sht15_ack(struct sht15_data *data)
+{
+ gpio_direction_output(data->pdata->gpio_data, 0);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_data, 1);
+
+ gpio_direction_input(data->pdata->gpio_data);
+}
+/**
+ * sht15_end_transmission() - notify device of end of transmission
+ * @data: device state
+ *
+ * This is basically a NAK. (single clock pulse, data high)
+ **/
+static void sht15_end_transmission(struct sht15_data *data)
+{
+ gpio_direction_output(data->pdata->gpio_data, 1);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+}
+
+static void sht15_bh_read_data(struct work_struct *work_s)
+{
+ int i;
+ uint16_t val = 0;
+ struct sht15_data *data
+ = container_of(work_s, struct sht15_data,
+ read_work);
+ /* Firstly, verify the line is low */
+ if (gpio_get_value(data->pdata->gpio_data)) {
+ /* If not, then start the interrupt again - care
+ here as could have gone low in meantime so verify
+ it hasn't!
+ */
+ atomic_set(&data->interrupt_handled, 0);
+ enable_irq(gpio_to_irq(data->pdata->gpio_data));
+ /* If still not occured or another handler has been scheduled */
+ if (gpio_get_value(data->pdata->gpio_data)
+ || atomic_read(&data->interrupt_handled))
+ return;
+ }
+ /* Read the data back from the device */
+ for (i = 0; i < 16; ++i) {
+ val <<= 1;
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ val |= !!gpio_get_value(data->pdata->gpio_data);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ if (i == 7)
+ sht15_ack(data);
+ }
+ /* Tell the device we are done */
+ sht15_end_transmission(data);
+
+ switch (data->flag) {
+ case SHT15_READING_TEMP:
+ data->val_temp = val;
+ break;
+ case SHT15_READING_HUMID:
+ data->val_humid = val;
+ break;
+ }
+
+ data->flag = SHT15_READING_NOTHING;
+ wake_up(&data->wait_queue);
+}
+
+static void sht15_update_voltage(struct work_struct *work_s)
+{
+ struct sht15_data *data
+ = container_of(work_s, struct sht15_data,
+ update_supply_work);
+ data->supply_uV = regulator_get_voltage(data->reg);
+}
+
+/**
+ * sht15_invalidate_voltage() - mark supply voltage invalid when notified by reg
+ * @nb: associated notification structure
+ * @event: voltage regulator state change event code
+ * @ignored: function parameter - ignored here
+ *
+ * Note that as the notification code holds the regulator lock, we have
+ * to schedule an update of the supply voltage rather than getting it directly.
+ **/
+static int sht15_invalidate_voltage(struct notifier_block *nb,
+ unsigned long event,
+ void *ignored)
+{
+ struct sht15_data *data = container_of(nb, struct sht15_data, nb);
+
+ if (event == REGULATOR_EVENT_VOLTAGE_CHANGE)
+ data->supply_uV_valid = false;
+ schedule_work(&data->update_supply_work);
+
+ return NOTIFY_OK;
+}
+
+static int __devinit sht15_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct sht15_data *data = kzalloc(sizeof(*data), GFP_KERNEL);
+
+ if (!data) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "kzalloc failed");
+ goto error_ret;
+ }
+
+ INIT_WORK(&data->read_work, sht15_bh_read_data);
+ INIT_WORK(&data->update_supply_work, sht15_update_voltage);
+ platform_set_drvdata(pdev, data);
+ mutex_init(&data->read_lock);
+ data->dev = &pdev->dev;
+ init_waitqueue_head(&data->wait_queue);
+
+ if (pdev->dev.platform_data == NULL) {
+ dev_err(&pdev->dev, "no platform data supplied");
+ goto err_free_data;
+ }
+ data->pdata = pdev->dev.platform_data;
+ data->supply_uV = data->pdata->supply_mv*1000;
+
+/* If a regulator is available, query what the supply voltage actually is!*/
+ data->reg = regulator_get(data->dev, "vcc");
+ if (!IS_ERR(data->reg)) {
+ data->supply_uV = regulator_get_voltage(data->reg);
+ regulator_enable(data->reg);
+ /* setup a notifier block to update this if another device
+ * causes the voltage to change */
+ data->nb.notifier_call = &sht15_invalidate_voltage;
+ ret = regulator_register_notifier(data->reg, &data->nb);
+ }
+/* Try requesting the GPIOs */
+ ret = gpio_request(data->pdata->gpio_sck, "SHT15 sck");
+ if (ret) {
+ dev_err(&pdev->dev, "gpio request failed");
+ goto err_free_data;
+ }
+ gpio_direction_output(data->pdata->gpio_sck, 0);
+ ret = gpio_request(data->pdata->gpio_data, "SHT15 data");
+ if (ret) {
+ dev_err(&pdev->dev, "gpio request failed");
+ goto err_release_gpio_sck;
+ }
+ ret = sysfs_create_group(&pdev->dev.kobj, &sht15_attr_group);
+ if (ret) {
+ dev_err(&pdev->dev, "sysfs create failed");
+ goto err_free_data;
+ }
+
+ ret = request_irq(gpio_to_irq(data->pdata->gpio_data),
+ sht15_interrupt_fired,
+ IRQF_TRIGGER_FALLING,
+ "sht15 data",
+ data);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get irq for data line");
+ goto err_release_gpio_data;
+ }
+ disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
+ sht15_connection_reset(data);
+ sht15_send_cmd(data, 0x1E);
+
+ data->hwmon_dev = hwmon_device_register(data->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ ret = PTR_ERR(data->hwmon_dev);
+ goto err_release_gpio_data;
+ }
+ return 0;
+
+err_release_gpio_data:
+ gpio_free(data->pdata->gpio_data);
+err_release_gpio_sck:
+ gpio_free(data->pdata->gpio_sck);
+err_free_data:
+ kfree(data);
+error_ret:
+
+ return ret;
+}
+
+static int __devexit sht15_remove(struct platform_device *pdev)
+{
+ struct sht15_data *data = platform_get_drvdata(pdev);
+
+ /* Make sure any reads from the device are done and
+ * prevent new ones beginnning */
+ mutex_lock(&data->read_lock);
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&pdev->dev.kobj, &sht15_attr_group);
+ if (!IS_ERR(data->reg)) {
+ regulator_unregister_notifier(data->reg, &data->nb);
+ regulator_disable(data->reg);
+ regulator_put(data->reg);
+ }
+
+ free_irq(gpio_to_irq(data->pdata->gpio_data), data);
+ gpio_free(data->pdata->gpio_data);
+ gpio_free(data->pdata->gpio_sck);
+ mutex_unlock(&data->read_lock);
+ kfree(data);
+ return 0;
+}
+
+
+static struct platform_driver sht_drivers[] = {
+ {
+ .driver = {
+ .name = "sht10",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ }, {
+ .driver = {
+ .name = "sht11",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ }, {
+ .driver = {
+ .name = "sht15",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ }, {
+ .driver = {
+ .name = "sht71",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ }, {
+ .driver = {
+ .name = "sht75",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ },
+};
+
+
+static int __init sht15_init(void)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sht_drivers); i++) {
+ ret = platform_driver_register(&sht_drivers[i]);
+ if (ret)
+ goto error_unreg;
+ }
+
+ return 0;
+
+error_unreg:
+ while (--i >= 0)
+ platform_driver_unregister(&sht_drivers[i]);
+
+ return ret;
+}
+module_init(sht15_init);
+
+static void __exit sht15_exit(void)
+{
+ int i;
+ for (i = ARRAY_SIZE(sht_drivers) - 1; i >= 0; i--)
+ platform_driver_unregister(&sht_drivers[i]);
+}
+module_exit(sht15_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
index 353a35b..0332a95 100644
--- a/drivers/ide/cs5536.c
+++ b/drivers/ide/cs5536.c
@@ -236,6 +236,7 @@
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timer_expiry = ide_dma_sff_timer_expiry,
+ .dma_sff_read_status = ide_dma_sff_read_status,
};
static const struct ide_port_info cs5536_info = {
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index a0eb87f..0feb66c 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -3,7 +3,7 @@
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
* Portions Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- * Portions Copyright (C) 2005-2008 MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2009 MontaVista Software, Inc.
*
* Thanks to HighPoint Technologies for their assistance, and hardware.
* Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his
@@ -114,6 +114,8 @@
* the register setting lists into the table indexed by the clock selected
* - set the correct hwif->ultra_mask for each individual chip
* - add Ultra and MW DMA mode filtering for the HPT37[24] based SATA cards
+ * - stop resetting HPT370's state machine before each DMA transfer as that has
+ * caused more harm than good
* Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com>
*/
@@ -133,7 +135,7 @@
#define DRV_NAME "hpt366"
/* various tuning parameters */
-#define HPT_RESET_STATE_ENGINE
+#undef HPT_RESET_STATE_ENGINE
#undef HPT_DELAY_INTERRUPT
static const char *quirk_drives[] = {
@@ -808,7 +810,7 @@
/* get DMA command mode */
dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
/* stop DMA */
- outb(dma_cmd & ~0x1, hwif->dma_base + ATA_DMA_CMD);
+ outb(dma_cmd & ~ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD);
hpt370_clear_engine(drive);
}
@@ -825,11 +827,11 @@
ide_hwif_t *hwif = drive->hwif;
u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- if (dma_stat & 0x01) {
+ if (dma_stat & ATA_DMA_ACTIVE) {
/* wait a little */
udelay(20);
dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- if (dma_stat & 0x01)
+ if (dma_stat & ATA_DMA_ACTIVE)
hpt370_irq_timeout(drive);
}
return ide_dma_end(drive);
@@ -851,7 +853,7 @@
dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
/* return 1 if INTR asserted */
- if (dma_stat & 4)
+ if (dma_stat & ATA_DMA_INTR)
return 1;
return 0;
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 2ae02b8..35dc38d 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -102,11 +102,14 @@
drive->dev_flags |= IDE_DFLAG_PARKED;
}
- if (rq && rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
- memcpy(rq->special, cmd, sizeof(*cmd));
+ if (rq && rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
+ struct ide_cmd *orig_cmd = rq->special;
- if (cmd->tf_flags & IDE_TFLAG_DYN)
- kfree(cmd);
+ if (cmd->tf_flags & IDE_TFLAG_DYN)
+ kfree(orig_cmd);
+ else
+ memcpy(orig_cmd, cmd, sizeof(*cmd));
+ }
}
/* obsolete, blk_rq_bytes() should be used instead */
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 052b9bf..f76e4e6 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -1682,7 +1682,7 @@
* The +2 is +1 for the stop command and +1 to allow for
* aligning the start address to a multiple of 16 bytes.
*/
- pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent(
+ pmif->dma_table_cpu = pci_alloc_consistent(
dev,
(MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
&hwif->dmatable_dma);
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index ebf4be5..2d175b5 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -50,9 +50,8 @@
static struct bus_type gameport_bus;
-static void gameport_add_driver(struct gameport_driver *drv);
static void gameport_add_port(struct gameport *gameport);
-static void gameport_destroy_port(struct gameport *gameport);
+static void gameport_attach_driver(struct gameport_driver *drv);
static void gameport_reconnect_port(struct gameport *gameport);
static void gameport_disconnect_port(struct gameport *gameport);
@@ -230,7 +229,6 @@
enum gameport_event_type {
GAMEPORT_REGISTER_PORT,
- GAMEPORT_REGISTER_DRIVER,
GAMEPORT_ATTACH_DRIVER,
};
@@ -374,8 +372,8 @@
gameport_add_port(event->object);
break;
- case GAMEPORT_REGISTER_DRIVER:
- gameport_add_driver(event->object);
+ case GAMEPORT_ATTACH_DRIVER:
+ gameport_attach_driver(event->object);
break;
default:
@@ -706,14 +704,14 @@
return 0;
}
-static void gameport_add_driver(struct gameport_driver *drv)
+static void gameport_attach_driver(struct gameport_driver *drv)
{
int error;
- error = driver_register(&drv->driver);
+ error = driver_attach(&drv->driver);
if (error)
printk(KERN_ERR
- "gameport: driver_register() failed for %s, error: %d\n",
+ "gameport: driver_attach() failed for %s, error: %d\n",
drv->driver.name, error);
}
diff --git a/drivers/input/input.c b/drivers/input/input.c
index d44065d..935a1835 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1549,7 +1549,6 @@
return error;
list_add_tail_rcu(&handle->d_node, &dev->h_list);
mutex_unlock(&dev->mutex);
- synchronize_rcu();
/*
* Since we are supposed to be called from ->connect()
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index f999dc6..444dec0 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -880,7 +880,7 @@
};
/*
- * Samsung NC10 with Fn+F? key release not working
+ * Samsung NC10,NC20 with Fn+F? key release not working
*/
static unsigned int atkbd_samsung_forced_release_keys[] = {
0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U
@@ -1534,6 +1534,24 @@
.driver_data = atkbd_samsung_forced_release_keys,
},
{
+ .ident = "Samsung NC20",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "NC20"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_samsung_forced_release_keys,
+ },
+ {
+ .ident = "Samsung SQ45S70S",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_samsung_forced_release_keys,
+ },
+ {
.ident = "Fujitsu Amilo PA 1510",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index e94b7d7..d427f32 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -252,7 +252,7 @@
}
error = request_irq(bf54x_kpad->irq, bfin_kpad_isr,
- IRQF_SAMPLE_RANDOM, DRV_NAME, pdev);
+ 0, DRV_NAME, pdev);
if (error) {
printk(KERN_ERR DRV_NAME
": unable to claim irq %d; error %d\n",
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 203abac..5c0a631 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -214,7 +214,7 @@
config HP_SDC_RTC
tristate "HP SDC Real Time Clock"
- depends on GSC || HP300
+ depends on (GSC || HP300) && SERIO
select HP_SDC
help
Say Y here if you want to support the built-in real time clock
diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c
index f63995f..3941f97 100644
--- a/drivers/input/mouse/pc110pad.c
+++ b/drivers/input/mouse/pc110pad.c
@@ -108,7 +108,6 @@
*/
static int __init pc110pad_init(void)
{
- struct pci_dev *dev;
int err;
if (!no_pci_devices())
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index bfe4924..1c9410d 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -819,6 +819,7 @@
MODULE_DEVICE_TABLE(parisc, hp_sdc_tbl);
static int __init hp_sdc_init_hppa(struct parisc_device *d);
+static struct delayed_work moduleloader_work;
static struct parisc_driver hp_sdc_driver = {
.name = "hp_sdc",
@@ -930,8 +931,15 @@
#if defined(__hppa__)
+static void request_module_delayed(struct work_struct *work)
+{
+ request_module("hp_sdc_mlc");
+}
+
static int __init hp_sdc_init_hppa(struct parisc_device *d)
{
+ int ret;
+
if (!d)
return 1;
if (hp_sdc.dev != NULL)
@@ -944,13 +952,26 @@
hp_sdc.data_io = d->hpa.start + 0x800;
hp_sdc.status_io = d->hpa.start + 0x801;
- return hp_sdc_init();
+ INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed);
+
+ ret = hp_sdc_init();
+ /* after sucessfull initialization give SDC some time to settle
+ * and then load the hp_sdc_mlc upper layer driver */
+ if (!ret)
+ schedule_delayed_work(&moduleloader_work,
+ msecs_to_jiffies(2000));
+
+ return ret;
}
#endif /* __hppa__ */
static void hp_sdc_exit(void)
{
+ /* do nothing if we don't have a SDC */
+ if (!hp_sdc.dev)
+ return;
+
write_lock_irq(&hp_sdc.lock);
/* Turn off all maskable "sub-function" irq's. */
@@ -969,6 +990,7 @@
tasklet_kill(&hp_sdc.task);
#if defined(__hppa__)
+ cancel_delayed_work_sync(&moduleloader_work);
if (unregister_parisc_driver(&hp_sdc_driver))
printk(KERN_WARNING PREFIX "Error unregistering HP SDC");
#endif
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 83ed2d5..fb8a3cd 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -377,6 +377,24 @@
{ }
};
+static struct dmi_system_id __initdata i8042_dmi_reset_table[] = {
+ {
+ .ident = "MSI Wind U-100",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+ DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+ },
+ },
+ {
+ .ident = "LG Electronics X110",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "X110"),
+ DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."),
+ },
+ },
+ { }
+};
+
#ifdef CONFIG_PNP
static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
{
@@ -386,6 +404,13 @@
DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
},
},
+ {
+ .ident = "MSI Wind U-100",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+ DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+ },
+ },
{ }
};
#endif
@@ -698,6 +723,9 @@
#endif
#ifdef CONFIG_X86
+ if (dmi_check_system(i8042_dmi_reset_table))
+ i8042_reset = 1;
+
if (dmi_check_system(i8042_dmi_noloop_table))
i8042_noloop = 1;
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 170f71e..3cffb70 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -712,22 +712,43 @@
static int i8042_controller_selftest(void)
{
unsigned char param;
+ int i = 0;
if (!i8042_reset)
return 0;
- if (i8042_command(¶m, I8042_CMD_CTL_TEST)) {
- printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
- return -ENODEV;
- }
+ /*
+ * We try this 5 times; on some really fragile systems this does not
+ * take the first time...
+ */
+ do {
- if (param != I8042_RET_CTL_TEST) {
+ if (i8042_command(¶m, I8042_CMD_CTL_TEST)) {
+ printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+ return -ENODEV;
+ }
+
+ if (param == I8042_RET_CTL_TEST)
+ return 0;
+
printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
- param, I8042_RET_CTL_TEST);
- return -EIO;
- }
+ param, I8042_RET_CTL_TEST);
+ msleep(50);
+ } while (i++ < 5);
+#ifdef CONFIG_X86
+ /*
+ * On x86, we don't fail entire i8042 initialization if controller
+ * reset fails in hopes that keyboard port will still be functional
+ * and user will still get a working keyboard. This is especially
+ * important on netbooks. On other arches we trust hardware more.
+ */
+ printk(KERN_INFO
+ "i8042: giving up on controller selftest, continuing anyway...\n");
return 0;
+#else
+ return -EIO;
+#endif
}
/*
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index e4728a2..ecaeb7e 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -736,8 +736,8 @@
/* Request AD7877 /DAV GPIO interrupt */
- err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING |
- IRQF_SAMPLE_RANDOM, spi->dev.driver->name, ts);
+ err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING,
+ spi->dev.driver->name, ts);
if (err) {
dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
goto err_free_mem;
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index ea4c61d..5d8a703 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -448,8 +448,7 @@
ad7879_setup(ts);
err = request_irq(bus->irq, ad7879_irq,
- IRQF_TRIGGER_FALLING | IRQF_SAMPLE_RANDOM,
- bus->dev.driver->name, ts);
+ IRQF_TRIGGER_FALLING, bus->dev.driver->name, ts);
if (err) {
dev_err(&bus->dev, "irq %d busy?\n", bus->irq);
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 056ac77..2b01e56 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -127,6 +127,8 @@
void (*filter_cleanup)(void *data);
int (*get_pendown_state)(void);
int gpio_pendown;
+
+ void (*wait_for_sync)(void);
};
/* leave chip selected when we're done, for quicker re-select? */
@@ -511,6 +513,10 @@
return !gpio_get_value(ts->gpio_pendown);
}
+static void null_wait_for_sync(void)
+{
+}
+
/*
* PENIRQ only kicks the timer. The timer only reissues the SPI transfer,
* to retrieve touchscreen status.
@@ -686,6 +692,7 @@
default:
BUG();
}
+ ts->wait_for_sync();
status = spi_async(ts->spi, m);
if (status)
dev_err(&ts->spi->dev, "spi_async --> %d\n",
@@ -723,6 +730,7 @@
} else {
/* pen is still down, continue with the measurement */
ts->msg_idx = 0;
+ ts->wait_for_sync();
status = spi_async(ts->spi, &ts->msg[0]);
if (status)
dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
@@ -746,7 +754,7 @@
* that here. (The "generic irq" framework may help...)
*/
ts->irq_disabled = 1;
- disable_irq(ts->spi->irq);
+ disable_irq_nosync(ts->spi->irq);
ts->pending = 1;
hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
HRTIMER_MODE_REL);
@@ -947,6 +955,8 @@
ts->penirq_recheck_delay_usecs =
pdata->penirq_recheck_delay_usecs;
+ ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
+
snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
input_dev->name = "ADS784x Touchscreen";
diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c
index fa67d78..3ffd4c4 100644
--- a/drivers/input/touchscreen/da9034-ts.c
+++ b/drivers/input/touchscreen/da9034-ts.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2006-2008 Marvell International Ltd.
* Fengwei Yin <fengwei.yin@marvell.com>
+ * Bin Yang <bin.yang@marvell.com>
* Eric Miao <eric.miao@marvell.com>
*
* This program is free software; you can redistribute it and/or modify
@@ -175,6 +176,16 @@
goto err_reset;
touch->state = STATE_STOP;
+
+ /* FIXME: PEN_{UP/DOWN} events are expected to be
+ * available by stopping TSI, but this is found not
+ * always true, delay and simulate such an event
+ * here is more reliable
+ */
+ mdelay(1);
+ da9034_event_handler(touch,
+ is_pen_down(touch) ? EVENT_PEN_DOWN :
+ EVENT_PEN_UP);
break;
case STATE_STOP:
@@ -189,8 +200,6 @@
report_pen_up(touch);
touch->state = STATE_IDLE;
}
-
- input_sync(touch->input_dev);
break;
case STATE_WAIT:
@@ -200,8 +209,10 @@
if (is_pen_down(touch)) {
start_tsi(touch);
touch->state = STATE_BUSY;
- } else
+ } else {
+ report_pen_up(touch);
touch->state = STATE_IDLE;
+ }
break;
}
return;
@@ -226,16 +237,12 @@
struct da9034_touch *touch =
container_of(nb, struct da9034_touch, notifier);
- if (event & DA9034_EVENT_PEN_DOWN) {
- if (is_pen_down(touch))
- da9034_event_handler(touch, EVENT_PEN_DOWN);
- else
- da9034_event_handler(touch, EVENT_PEN_UP);
- }
-
if (event & DA9034_EVENT_TSI_READY)
da9034_event_handler(touch, EVENT_TSI_READY);
+ if ((event & DA9034_EVENT_PEN_DOWN) && touch->state == STATE_IDLE)
+ da9034_event_handler(touch, EVENT_PEN_DOWN);
+
return 0;
}
@@ -385,6 +392,6 @@
module_exit(da9034_touch_exit);
MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034");
-MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>, Bin Yang <bin.yang@marvell.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:da9034-touch");
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index dfa6a84..4cc047a 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -111,13 +111,12 @@
#else
static void wm97xx_acc_pen_up(struct wm97xx *wm)
{
- int count = 16;
+ unsigned int count;
+
schedule_timeout_uninterruptible(1);
- while (count < 16) {
+ for (count = 0; count < 16; count++)
MODR;
- count--;
- }
}
#endif
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index cec480b..69af838 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -370,8 +370,7 @@
* provided. */
BUG_ON(!wm->mach_ops->irq_enable);
- if (request_irq(wm->pen_irq, wm97xx_pen_interrupt,
- IRQF_SHARED | IRQF_SAMPLE_RANDOM,
+ if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED,
"wm97xx-pen", wm)) {
dev_err(wm->dev,
"Failed to register pen down interrupt, polling");
diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c
index ec3c0e5..2b3a055 100644
--- a/drivers/isdn/hisax/st5481_usb.c
+++ b/drivers/isdn/hisax/st5481_usb.c
@@ -149,14 +149,7 @@
if (ctrl_msg->dr.bRequest == USB_REQ_CLEAR_FEATURE) {
/* Special case handling for pipe reset */
le16_to_cpus(&ctrl_msg->dr.wIndex);
-
- /* toggle is reset on clear */
- usb_settoggle(adapter->usb_dev,
- ctrl_msg->dr.wIndex & ~USB_DIR_IN,
- (ctrl_msg->dr.wIndex & USB_DIR_IN) == 0,
- 0);
-
-
+ usb_reset_endpoint(adapter->usb_dev, ctrl_msg->dr.wIndex);
}
if (ctrl_msg->complete)
diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
index ac8a4a3..af92a17 100644
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -158,7 +158,8 @@
/* segments.c: */
void setup_default_gdt_entries(struct lguest_ro_state *state);
void setup_guest_gdt(struct lg_cpu *cpu);
-void load_guest_gdt(struct lg_cpu *cpu, unsigned long table, u32 num);
+void load_guest_gdt_entry(struct lg_cpu *cpu, unsigned int i,
+ u32 low, u32 hi);
void guest_load_tls(struct lg_cpu *cpu, unsigned long tls_array);
void copy_gdt(const struct lg_cpu *cpu, struct desc_struct *gdt);
void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt);
diff --git a/drivers/lguest/segments.c b/drivers/lguest/segments.c
index 4f15439..7ede64f 100644
--- a/drivers/lguest/segments.c
+++ b/drivers/lguest/segments.c
@@ -144,18 +144,19 @@
gdt[i] = cpu->arch.gdt[i];
}
-/*H:620 This is where the Guest asks us to load a new GDT (LHCALL_LOAD_GDT).
- * We copy it from the Guest and tweak the entries. */
-void load_guest_gdt(struct lg_cpu *cpu, unsigned long table, u32 num)
+/*H:620 This is where the Guest asks us to load a new GDT entry
+ * (LHCALL_LOAD_GDT_ENTRY). We tweak the entry and copy it in. */
+void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
{
/* We assume the Guest has the same number of GDT entries as the
* Host, otherwise we'd have to dynamically allocate the Guest GDT. */
if (num > ARRAY_SIZE(cpu->arch.gdt))
kill_guest(cpu, "too many gdt entries %i", num);
- /* We read the whole thing in, then fix it up. */
- __lgread(cpu, cpu->arch.gdt, table, num * sizeof(cpu->arch.gdt[0]));
- fixup_gdt_table(cpu, 0, ARRAY_SIZE(cpu->arch.gdt));
+ /* Set it up, then fix it. */
+ cpu->arch.gdt[num].a = lo;
+ cpu->arch.gdt[num].b = hi;
+ fixup_gdt_table(cpu, num, num+1);
/* Mark that the GDT changed so the core knows it has to copy it again,
* even if the Guest is run on the same CPU. */
cpu->changed |= CHANGED_GDT;
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index a6b7176..1a83910 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -324,6 +324,11 @@
u8 insn[3] = {0xcd, 0x1f, 0x90};
__lgwrite(cpu, guest_pa(cpu, cpu->regs->eip), insn, sizeof(insn));
+ /* The above write might have caused a copy of that page to be made
+ * (if it was read-only). We need to make sure the Guest has
+ * up-to-date pagetables. As this doesn't happen often, we can just
+ * drop them all. */
+ guest_pagetable_clear_all(cpu);
}
static bool is_hypercall(struct lg_cpu *cpu)
@@ -563,8 +568,8 @@
int lguest_arch_do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
{
switch (args->arg0) {
- case LHCALL_LOAD_GDT:
- load_guest_gdt(cpu, args->arg1, args->arg2);
+ case LHCALL_LOAD_GDT_ENTRY:
+ load_guest_gdt_entry(cpu, args->arg1, args->arg2, args->arg3);
break;
case LHCALL_LOAD_IDT_ENTRY:
load_guest_idt_entry(cpu, args->arg1, args->arg2, args->arg3);
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 173cf55..3d90683 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -123,7 +123,7 @@
config PMAC_MEDIABAY
bool "Support PowerBook hotswap media bay"
- depends on PPC_PMAC && PPC32
+ depends on PPC_PMAC && PPC32 && BLOCK
help
This option adds support for older PowerBook's hotswap media bay
that can contains batteries, floppy drives, or IDE devices. PCI
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index d7e46d3..cf02188 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -447,6 +447,7 @@
return -ENODEV;
}
+EXPORT_SYMBOL_GPL(check_media_bay_by_base);
int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
int irq, ide_hwif_t *hwif)
@@ -486,6 +487,7 @@
return -ENODEV;
}
+EXPORT_SYMBOL_GPL(media_bay_set_ide_infos);
#endif /* CONFIG_BLK_DEV_IDE_PMAC */
static void media_bay_step(int i)
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index f8a9f7a..1fb91ed 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1479,6 +1479,7 @@
s += blocks;
}
bitmap->last_end_sync = jiffies;
+ sysfs_notify(&bitmap->mddev->kobj, NULL, "sync_completed");
}
static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset, int needed)
@@ -1589,7 +1590,7 @@
int bitmap_create(mddev_t *mddev)
{
struct bitmap *bitmap;
- unsigned long blocks = mddev->resync_max_sectors;
+ sector_t blocks = mddev->resync_max_sectors;
unsigned long chunks;
unsigned long pages;
struct file *file = mddev->bitmap_file;
@@ -1631,8 +1632,8 @@
bitmap->chunkshift = ffz(~bitmap->chunksize);
/* now that chunksize and chunkshift are set, we can use these macros */
- chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) /
- CHUNK_BLOCK_RATIO(bitmap);
+ chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) >>
+ CHUNK_BLOCK_SHIFT(bitmap);
pages = (chunks + PAGE_COUNTER_RATIO - 1) / PAGE_COUNTER_RATIO;
BUG_ON(!pages);
diff --git a/drivers/md/dm-bio-list.h b/drivers/md/dm-bio-list.h
deleted file mode 100644
index 345098b..0000000
--- a/drivers/md/dm-bio-list.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright (C) 2004 Red Hat UK Ltd.
- *
- * This file is released under the GPL.
- */
-
-#ifndef DM_BIO_LIST_H
-#define DM_BIO_LIST_H
-
-#include <linux/bio.h>
-
-#ifdef CONFIG_BLOCK
-
-struct bio_list {
- struct bio *head;
- struct bio *tail;
-};
-
-static inline int bio_list_empty(const struct bio_list *bl)
-{
- return bl->head == NULL;
-}
-
-static inline void bio_list_init(struct bio_list *bl)
-{
- bl->head = bl->tail = NULL;
-}
-
-#define bio_list_for_each(bio, bl) \
- for (bio = (bl)->head; bio; bio = bio->bi_next)
-
-static inline unsigned bio_list_size(const struct bio_list *bl)
-{
- unsigned sz = 0;
- struct bio *bio;
-
- bio_list_for_each(bio, bl)
- sz++;
-
- return sz;
-}
-
-static inline void bio_list_add(struct bio_list *bl, struct bio *bio)
-{
- bio->bi_next = NULL;
-
- if (bl->tail)
- bl->tail->bi_next = bio;
- else
- bl->head = bio;
-
- bl->tail = bio;
-}
-
-static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio)
-{
- bio->bi_next = bl->head;
-
- bl->head = bio;
-
- if (!bl->tail)
- bl->tail = bio;
-}
-
-static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2)
-{
- if (!bl2->head)
- return;
-
- if (bl->tail)
- bl->tail->bi_next = bl2->head;
- else
- bl->head = bl2->head;
-
- bl->tail = bl2->tail;
-}
-
-static inline void bio_list_merge_head(struct bio_list *bl,
- struct bio_list *bl2)
-{
- if (!bl2->head)
- return;
-
- if (bl->head)
- bl2->tail->bi_next = bl->head;
- else
- bl->tail = bl2->tail;
-
- bl->head = bl2->head;
-}
-
-static inline struct bio *bio_list_pop(struct bio_list *bl)
-{
- struct bio *bio = bl->head;
-
- if (bio) {
- bl->head = bl->head->bi_next;
- if (!bl->head)
- bl->tail = NULL;
-
- bio->bi_next = NULL;
- }
-
- return bio;
-}
-
-static inline struct bio *bio_list_get(struct bio_list *bl)
-{
- struct bio *bio = bl->head;
-
- bl->head = bl->tail = NULL;
-
- return bio;
-}
-
-#endif /* CONFIG_BLOCK */
-#endif
diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c
index 59ee1b0..559dbb52 100644
--- a/drivers/md/dm-delay.c
+++ b/drivers/md/dm-delay.c
@@ -15,8 +15,6 @@
#include <linux/device-mapper.h>
-#include "dm-bio-list.h"
-
#define DM_MSG_PREFIX "delay"
struct delay_c {
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 095f77b..6a386ab 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -8,7 +8,6 @@
#include <linux/device-mapper.h>
#include "dm-path-selector.h"
-#include "dm-bio-list.h"
#include "dm-bio-record.h"
#include "dm-uevent.h"
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index 536ef0b..076fbb4 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -5,7 +5,6 @@
* This file is released under the GPL.
*/
-#include "dm-bio-list.h"
#include "dm-bio-record.h"
#include <linux/init.h>
diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c
index 59f8d9d..7b899be 100644
--- a/drivers/md/dm-region-hash.c
+++ b/drivers/md/dm-region-hash.c
@@ -14,7 +14,6 @@
#include <linux/vmalloc.h>
#include "dm.h"
-#include "dm-bio-list.h"
#define DM_MSG_PREFIX "region hash"
diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c
index 981a041..d73f17f 100644
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -22,7 +22,6 @@
#include <linux/workqueue.h>
#include "dm-exception-store.h"
-#include "dm-bio-list.h"
#define DM_MSG_PREFIX "snapshots"
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 8a994be..424f7b0 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -6,7 +6,6 @@
*/
#include "dm.h"
-#include "dm-bio-list.h"
#include "dm-uevent.h"
#include <linux/init.h>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index ed5727c..612343f 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2017,6 +2017,8 @@
clear_bit(MD_CHANGE_PENDING, &mddev->flags);
spin_unlock_irq(&mddev->write_lock);
wake_up(&mddev->sb_wait);
+ if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
@@ -2086,6 +2088,7 @@
* -writemostly - clears write_mostly
* blocked - sets the Blocked flag
* -blocked - clears the Blocked flag
+ * insync - sets Insync providing device isn't active
*/
int err = -EINVAL;
if (cmd_match(buf, "faulty") && rdev->mddev->pers) {
@@ -2118,6 +2121,9 @@
md_wakeup_thread(rdev->mddev->thread);
err = 0;
+ } else if (cmd_match(buf, "insync") && rdev->raid_disk == -1) {
+ set_bit(In_sync, &rdev->flags);
+ err = 0;
}
if (!err && rdev->sysfs_state)
sysfs_notify_dirent(rdev->sysfs_state);
@@ -2190,7 +2196,7 @@
} else if (rdev->mddev->pers) {
mdk_rdev_t *rdev2;
/* Activating a spare .. or possibly reactivating
- * if we every get bitmaps working here.
+ * if we ever get bitmaps working here.
*/
if (rdev->raid_disk != -1)
@@ -3482,12 +3488,15 @@
{
unsigned long max_sectors, resync;
+ if (!test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
+ return sprintf(page, "none\n");
+
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
max_sectors = mddev->resync_max_sectors;
else
max_sectors = mddev->dev_sectors;
- resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active));
+ resync = mddev->curr_resync_completed;
return sprintf(page, "%lu / %lu\n", resync, max_sectors);
}
@@ -6334,18 +6343,13 @@
sector_t sectors;
skipped = 0;
- if (j >= mddev->resync_max) {
- sysfs_notify(&mddev->kobj, NULL, "sync_completed");
- wait_event(mddev->recovery_wait,
- mddev->resync_max > j
- || kthread_should_stop());
- }
- if (kthread_should_stop())
- goto interrupted;
- if (mddev->curr_resync > mddev->curr_resync_completed &&
- (mddev->curr_resync - mddev->curr_resync_completed)
- > (max_sectors >> 4)) {
+ if ((mddev->curr_resync > mddev->curr_resync_completed &&
+ (mddev->curr_resync - mddev->curr_resync_completed)
+ > (max_sectors >> 4)) ||
+ (j - mddev->curr_resync_completed)*2
+ >= mddev->resync_max - mddev->curr_resync_completed
+ ) {
/* time to update curr_resync_completed */
blk_unplug(mddev->queue);
wait_event(mddev->recovery_wait,
@@ -6353,7 +6357,17 @@
mddev->curr_resync_completed =
mddev->curr_resync;
set_bit(MD_CHANGE_CLEAN, &mddev->flags);
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
+
+ if (j >= mddev->resync_max)
+ wait_event(mddev->recovery_wait,
+ mddev->resync_max > j
+ || kthread_should_stop());
+
+ if (kthread_should_stop())
+ goto interrupted;
+
sectors = mddev->pers->sync_request(mddev, j, &skipped,
currspeed < speed_min(mddev));
if (sectors == 0) {
@@ -6461,6 +6475,7 @@
skip:
mddev->curr_resync = 0;
+ mddev->curr_resync_completed = 0;
mddev->resync_min = 0;
mddev->resync_max = MaxSector;
sysfs_notify(&mddev->kobj, NULL, "sync_completed");
diff --git a/drivers/md/md.h b/drivers/md/md.h
index e9b7f54..8227ab9 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -12,10 +12,17 @@
Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef _MD_K_H
-#define _MD_K_H
+#ifndef _MD_MD_H
+#define _MD_MD_H
-#ifdef CONFIG_BLOCK
+#include <linux/blkdev.h>
+#include <linux/kobject.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
#define MaxSector (~(sector_t)0)
@@ -408,10 +415,6 @@
if (p) put_page(p);
}
-#endif /* CONFIG_BLOCK */
-#endif
-
-
extern int register_md_personality(struct mdk_personality *p);
extern int unregister_md_personality(struct mdk_personality *p);
extern mdk_thread_t * md_register_thread(void (*run) (mddev_t *mddev),
@@ -434,3 +437,5 @@
extern int md_allow_write(mddev_t *mddev);
extern void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
extern void md_set_array_sectors(mddev_t *mddev, sector_t array_sectors);
+
+#endif /* _MD_MD_H */
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 274b491..36df910 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -35,7 +35,6 @@
#include <linux/blkdev.h>
#include <linux/seq_file.h>
#include "md.h"
-#include "dm-bio-list.h"
#include "raid1.h"
#include "bitmap.h"
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index e293d92..81a54f1 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -22,7 +22,6 @@
#include <linux/blkdev.h>
#include <linux/seq_file.h>
#include "md.h"
-#include "dm-bio-list.h"
#include "raid10.h"
#include "bitmap.h"
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 3bbc6d6..4616bc3 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3845,6 +3845,7 @@
wait_event(conf->wait_for_overlap,
atomic_read(&conf->reshape_stripes)==0);
mddev->reshape_position = conf->reshape_progress;
+ mddev->curr_resync_completed = mddev->curr_resync;
conf->reshape_checkpoint = jiffies;
set_bit(MD_CHANGE_DEVS, &mddev->flags);
md_wakeup_thread(mddev->thread);
@@ -3854,6 +3855,7 @@
conf->reshape_safe = mddev->reshape_position;
spin_unlock_irq(&conf->device_lock);
wake_up(&conf->wait_for_overlap);
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
if (mddev->delta_disks < 0) {
@@ -3938,11 +3940,13 @@
* then we need to write out the superblock.
*/
sector_nr += reshape_sectors;
- if (sector_nr >= mddev->resync_max) {
+ if ((sector_nr - mddev->curr_resync_completed) * 2
+ >= mddev->resync_max - mddev->curr_resync_completed) {
/* Cannot proceed until we've updated the superblock... */
wait_event(conf->wait_for_overlap,
atomic_read(&conf->reshape_stripes) == 0);
mddev->reshape_position = conf->reshape_progress;
+ mddev->curr_resync_completed = mddev->curr_resync;
conf->reshape_checkpoint = jiffies;
set_bit(MD_CHANGE_DEVS, &mddev->flags);
md_wakeup_thread(mddev->thread);
@@ -3953,6 +3957,7 @@
conf->reshape_safe = mddev->reshape_position;
spin_unlock_irq(&conf->device_lock);
wake_up(&conf->wait_for_overlap);
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
return reshape_sectors;
}
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index d9d974a..add3395 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -1461,7 +1461,6 @@
return ret;
}
- usb_settoggle(hdw->usb_dev, 0 & 0xf, !(0 & USB_DIR_IN), 0);
usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f));
pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index d0d126c..5d496a9 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -5934,7 +5934,7 @@
/* Initalize the timer
*/
- init_timer(&pCfg->timer);
+ init_timer_on_stack(&pCfg->timer);
pCfg->timer.data = (unsigned long) ioc;
pCfg->timer.function = mpt_timer_expired;
pCfg->wait_done = 0;
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index d184dfa..db39f4a 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -278,7 +278,7 @@
* We only use page mode writes; the alternative is sloooow. This routine
* writes at most one page.
*/
-static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
+static ssize_t at24_eeprom_write(struct at24_data *at24, const char *buf,
unsigned offset, size_t count)
{
struct i2c_client *client;
@@ -347,8 +347,8 @@
return -ETIMEDOUT;
}
-static ssize_t at24_write(struct at24_data *at24,
- char *buf, loff_t off, size_t count)
+static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off,
+ size_t count)
{
ssize_t retval = 0;
@@ -406,7 +406,7 @@
return at24_read(at24, buf, offset, count);
}
-static ssize_t at24_macc_write(struct memory_accessor *macc, char *buf,
+static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf,
off_t offset, size_t count)
{
struct at24_data *at24 = container_of(macc, struct at24_data, macc);
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index 6bc0dac..b34cb5f 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -140,7 +140,8 @@
static ssize_t
-at25_ee_write(struct at25_data *at25, char *buf, loff_t off, size_t count)
+at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
+ size_t count)
{
ssize_t status = 0;
unsigned written = 0;
@@ -276,7 +277,7 @@
return at25_ee_read(at25, buf, offset, count);
}
-static ssize_t at25_mem_write(struct memory_accessor *mem, char *buf,
+static ssize_t at25_mem_write(struct memory_accessor *mem, const char *buf,
off_t offset, size_t count)
{
struct at25_data *at25 = container_of(mem, struct at25_data, mem);
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index 3e6e42d..bbefe77 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -375,7 +375,7 @@
void *gru_start_vaddr;
if (!is_uv_system())
- return -ENODEV;
+ return 0;
#if defined CONFIG_IA64
gru_start_paddr = 0xd000000000UL; /* ZZZZZZZZZZZZZZZZZZZ fixme */
diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c
index 16f8dca..7896849 100644
--- a/drivers/misc/sgi-xp/xp_main.c
+++ b/drivers/misc/sgi-xp/xp_main.c
@@ -248,19 +248,19 @@
enum xp_retval ret;
int ch_number;
+ /* initialize the connection registration mutex */
+ for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
+ mutex_init(&xpc_registrations[ch_number].mutex);
+
if (is_shub())
ret = xp_init_sn2();
else if (is_uv())
ret = xp_init_uv();
else
- ret = xpUnsupported;
+ ret = 0;
if (ret != xpSuccess)
- return -ENODEV;
-
- /* initialize the connection registration mutex */
- for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
- mutex_init(&xpc_registrations[ch_number].mutex);
+ return ret;
return 0;
}
diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h
index 114444c..b94d5f7 100644
--- a/drivers/misc/sgi-xp/xpc.h
+++ b/drivers/misc/sgi-xp/xpc.h
@@ -90,18 +90,21 @@
short max_npartitions; /* value of XPC_MAX_PARTITIONS */
u8 version;
u8 pad1[3]; /* align to next u64 in 1st 64-byte cacheline */
- union {
- unsigned long vars_pa; /* phys address of struct xpc_vars */
- unsigned long activate_gru_mq_desc_gpa; /* phys addr of */
- /* activate mq's */
- /* gru mq descriptor */
- } sn;
unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */
- u64 pad2[10]; /* align to last u64 in 2nd 64-byte cacheline */
+ union {
+ struct {
+ unsigned long vars_pa; /* phys addr */
+ } sn2;
+ struct {
+ unsigned long heartbeat_gpa; /* phys addr */
+ unsigned long activate_gru_mq_desc_gpa; /* phys addr */
+ } uv;
+ } sn;
+ u64 pad2[9]; /* align to last u64 in 2nd 64-byte cacheline */
u64 SAL_nasids_size; /* SAL: size of each nasid mask in bytes */
};
-#define XPC_RP_VERSION _XPC_VERSION(2, 0) /* version 2.0 of the reserved page */
+#define XPC_RP_VERSION _XPC_VERSION(3, 0) /* version 3.0 of the reserved page */
/*
* Define the structures by which XPC variables can be exported to other
@@ -182,6 +185,17 @@
(XPC_RP_MACH_NASIDS(_rp) + \
xpc_nasid_mask_nlongs))
+
+/*
+ * The following structure describes the partition's heartbeat info which
+ * will be periodically read by other partitions to determine whether this
+ * XPC is still 'alive'.
+ */
+struct xpc_heartbeat_uv {
+ unsigned long value;
+ unsigned long offline; /* if 0, heartbeat should be changing */
+};
+
/*
* Info pertinent to a GRU message queue using a watch list for irq generation.
*/
@@ -198,7 +212,7 @@
/*
* The activate_mq is used to send/receive GRU messages that affect XPC's
- * heartbeat, partition active state, and channel state. This is UV only.
+ * partition active state and channel state. This is uv only.
*/
struct xpc_activate_mq_msghdr_uv {
unsigned int gru_msg_hdr; /* FOR GRU INTERNAL USE ONLY */
@@ -210,33 +224,27 @@
/* activate_mq defined message types */
#define XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV 0
-#define XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV 1
-#define XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV 2
-#define XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV 3
-#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV 4
-#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV 5
+#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV 1
+#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV 2
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV 6
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV 7
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV 8
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV 9
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV 3
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV 4
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV 5
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV 6
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV 7
-#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV 10
-#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV 11
+#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV 8
+#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV 9
struct xpc_activate_mq_msg_uv {
struct xpc_activate_mq_msghdr_uv hdr;
};
-struct xpc_activate_mq_msg_heartbeat_req_uv {
- struct xpc_activate_mq_msghdr_uv hdr;
- u64 heartbeat;
-};
-
struct xpc_activate_mq_msg_activate_req_uv {
struct xpc_activate_mq_msghdr_uv hdr;
unsigned long rp_gpa;
+ unsigned long heartbeat_gpa;
unsigned long activate_gru_mq_desc_gpa;
};
@@ -271,6 +279,11 @@
unsigned long notify_gru_mq_desc_gpa;
};
+struct xpc_activate_mq_msg_chctl_opencomplete_uv {
+ struct xpc_activate_mq_msghdr_uv hdr;
+ short ch_number;
+};
+
/*
* Functions registered by add_timer() or called by kernel_thread() only
* allow for a single 64-bit argument. The following macros can be used to
@@ -576,30 +589,32 @@
#define XPC_C_WASCONNECTED 0x00000001 /* channel was connected */
-#define XPC_C_ROPENREPLY 0x00000002 /* remote open channel reply */
-#define XPC_C_OPENREPLY 0x00000004 /* local open channel reply */
-#define XPC_C_ROPENREQUEST 0x00000008 /* remote open channel request */
-#define XPC_C_OPENREQUEST 0x00000010 /* local open channel request */
+#define XPC_C_ROPENCOMPLETE 0x00000002 /* remote open channel complete */
+#define XPC_C_OPENCOMPLETE 0x00000004 /* local open channel complete */
+#define XPC_C_ROPENREPLY 0x00000008 /* remote open channel reply */
+#define XPC_C_OPENREPLY 0x00000010 /* local open channel reply */
+#define XPC_C_ROPENREQUEST 0x00000020 /* remote open channel request */
+#define XPC_C_OPENREQUEST 0x00000040 /* local open channel request */
-#define XPC_C_SETUP 0x00000020 /* channel's msgqueues are alloc'd */
-#define XPC_C_CONNECTEDCALLOUT 0x00000040 /* connected callout initiated */
+#define XPC_C_SETUP 0x00000080 /* channel's msgqueues are alloc'd */
+#define XPC_C_CONNECTEDCALLOUT 0x00000100 /* connected callout initiated */
#define XPC_C_CONNECTEDCALLOUT_MADE \
- 0x00000080 /* connected callout completed */
-#define XPC_C_CONNECTED 0x00000100 /* local channel is connected */
-#define XPC_C_CONNECTING 0x00000200 /* channel is being connected */
+ 0x00000200 /* connected callout completed */
+#define XPC_C_CONNECTED 0x00000400 /* local channel is connected */
+#define XPC_C_CONNECTING 0x00000800 /* channel is being connected */
-#define XPC_C_RCLOSEREPLY 0x00000400 /* remote close channel reply */
-#define XPC_C_CLOSEREPLY 0x00000800 /* local close channel reply */
-#define XPC_C_RCLOSEREQUEST 0x00001000 /* remote close channel request */
-#define XPC_C_CLOSEREQUEST 0x00002000 /* local close channel request */
+#define XPC_C_RCLOSEREPLY 0x00001000 /* remote close channel reply */
+#define XPC_C_CLOSEREPLY 0x00002000 /* local close channel reply */
+#define XPC_C_RCLOSEREQUEST 0x00004000 /* remote close channel request */
+#define XPC_C_CLOSEREQUEST 0x00008000 /* local close channel request */
-#define XPC_C_DISCONNECTED 0x00004000 /* channel is disconnected */
-#define XPC_C_DISCONNECTING 0x00008000 /* channel is being disconnected */
+#define XPC_C_DISCONNECTED 0x00010000 /* channel is disconnected */
+#define XPC_C_DISCONNECTING 0x00020000 /* channel is being disconnected */
#define XPC_C_DISCONNECTINGCALLOUT \
- 0x00010000 /* disconnecting callout initiated */
+ 0x00040000 /* disconnecting callout initiated */
#define XPC_C_DISCONNECTINGCALLOUT_MADE \
- 0x00020000 /* disconnecting callout completed */
-#define XPC_C_WDISCONNECT 0x00040000 /* waiting for channel disconnect */
+ 0x00080000 /* disconnecting callout completed */
+#define XPC_C_WDISCONNECT 0x00100000 /* waiting for channel disconnect */
/*
* The channel control flags (chctl) union consists of a 64-bit variable which
@@ -618,11 +633,13 @@
#define XPC_CHCTL_CLOSEREPLY 0x02
#define XPC_CHCTL_OPENREQUEST 0x04
#define XPC_CHCTL_OPENREPLY 0x08
-#define XPC_CHCTL_MSGREQUEST 0x10
+#define XPC_CHCTL_OPENCOMPLETE 0x10
+#define XPC_CHCTL_MSGREQUEST 0x20
#define XPC_OPENCLOSE_CHCTL_FLAGS \
(XPC_CHCTL_CLOSEREQUEST | XPC_CHCTL_CLOSEREPLY | \
- XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY)
+ XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY | \
+ XPC_CHCTL_OPENCOMPLETE)
#define XPC_MSG_CHCTL_FLAGS XPC_CHCTL_MSGREQUEST
static inline int
@@ -687,6 +704,9 @@
};
struct xpc_partition_uv {
+ unsigned long heartbeat_gpa; /* phys addr of partition's heartbeat */
+ struct xpc_heartbeat_uv cached_heartbeat; /* cached copy of */
+ /* partition's heartbeat */
unsigned long activate_gru_mq_desc_gpa; /* phys addr of parititon's */
/* activate mq's gru mq */
/* descriptor */
@@ -698,14 +718,12 @@
u8 remote_act_state; /* remote partition's act_state */
u8 act_state_req; /* act_state request from remote partition */
enum xp_retval reason; /* reason for deactivate act_state request */
- u64 heartbeat; /* incremented by remote partition */
};
/* struct xpc_partition_uv flags */
-#define XPC_P_HEARTBEAT_OFFLINE_UV 0x00000001
+#define XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV 0x00000001
#define XPC_P_ENGAGED_UV 0x00000002
-#define XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV 0x00000004
/* struct xpc_partition_uv act_state change requests */
@@ -762,6 +780,62 @@
} ____cacheline_aligned;
+struct xpc_arch_operations {
+ int (*setup_partitions) (void);
+ void (*teardown_partitions) (void);
+ void (*process_activate_IRQ_rcvd) (void);
+ enum xp_retval (*get_partition_rsvd_page_pa)
+ (void *, u64 *, unsigned long *, size_t *);
+ int (*setup_rsvd_page) (struct xpc_rsvd_page *);
+
+ void (*allow_hb) (short);
+ void (*disallow_hb) (short);
+ void (*disallow_all_hbs) (void);
+ void (*increment_heartbeat) (void);
+ void (*offline_heartbeat) (void);
+ void (*online_heartbeat) (void);
+ void (*heartbeat_init) (void);
+ void (*heartbeat_exit) (void);
+ enum xp_retval (*get_remote_heartbeat) (struct xpc_partition *);
+
+ void (*request_partition_activation) (struct xpc_rsvd_page *,
+ unsigned long, int);
+ void (*request_partition_reactivation) (struct xpc_partition *);
+ void (*request_partition_deactivation) (struct xpc_partition *);
+ void (*cancel_partition_deactivation_request) (struct xpc_partition *);
+ enum xp_retval (*setup_ch_structures) (struct xpc_partition *);
+ void (*teardown_ch_structures) (struct xpc_partition *);
+
+ enum xp_retval (*make_first_contact) (struct xpc_partition *);
+
+ u64 (*get_chctl_all_flags) (struct xpc_partition *);
+ void (*send_chctl_closerequest) (struct xpc_channel *, unsigned long *);
+ void (*send_chctl_closereply) (struct xpc_channel *, unsigned long *);
+ void (*send_chctl_openrequest) (struct xpc_channel *, unsigned long *);
+ void (*send_chctl_openreply) (struct xpc_channel *, unsigned long *);
+ void (*send_chctl_opencomplete) (struct xpc_channel *, unsigned long *);
+ void (*process_msg_chctl_flags) (struct xpc_partition *, int);
+
+ enum xp_retval (*save_remote_msgqueue_pa) (struct xpc_channel *,
+ unsigned long);
+
+ enum xp_retval (*setup_msg_structures) (struct xpc_channel *);
+ void (*teardown_msg_structures) (struct xpc_channel *);
+
+ void (*indicate_partition_engaged) (struct xpc_partition *);
+ void (*indicate_partition_disengaged) (struct xpc_partition *);
+ void (*assume_partition_disengaged) (short);
+ int (*partition_engaged) (short);
+ int (*any_partition_engaged) (void);
+
+ int (*n_of_deliverable_payloads) (struct xpc_channel *);
+ enum xp_retval (*send_payload) (struct xpc_channel *, u32, void *,
+ u16, u8, xpc_notify_func, void *);
+ void *(*get_deliverable_payload) (struct xpc_channel *);
+ void (*received_payload) (struct xpc_channel *, void *);
+ void (*notify_senders_of_disconnect) (struct xpc_channel *);
+};
+
/* struct xpc_partition act_state values (for XPC HB) */
#define XPC_P_AS_INACTIVE 0x00 /* partition is not active */
@@ -802,67 +876,17 @@
/* found in xpc_main.c */
extern struct device *xpc_part;
extern struct device *xpc_chan;
+extern struct xpc_arch_operations xpc_arch_ops;
extern int xpc_disengage_timelimit;
extern int xpc_disengage_timedout;
extern int xpc_activate_IRQ_rcvd;
extern spinlock_t xpc_activate_IRQ_rcvd_lock;
extern wait_queue_head_t xpc_activate_IRQ_wq;
-extern void *xpc_heartbeating_to_mask;
extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **);
extern void xpc_activate_partition(struct xpc_partition *);
extern void xpc_activate_kthreads(struct xpc_channel *, int);
extern void xpc_create_kthreads(struct xpc_channel *, int, int);
extern void xpc_disconnect_wait(int);
-extern int (*xpc_setup_partitions_sn) (void);
-extern void (*xpc_teardown_partitions_sn) (void);
-extern enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *, u64 *,
- unsigned long *,
- size_t *);
-extern int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *);
-extern void (*xpc_heartbeat_init) (void);
-extern void (*xpc_heartbeat_exit) (void);
-extern void (*xpc_increment_heartbeat) (void);
-extern void (*xpc_offline_heartbeat) (void);
-extern void (*xpc_online_heartbeat) (void);
-extern enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *);
-extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *);
-extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *);
-extern enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *);
-extern void (*xpc_teardown_msg_structures) (struct xpc_channel *);
-extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *);
-extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int);
-extern int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *);
-extern void *(*xpc_get_deliverable_payload) (struct xpc_channel *);
-extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *,
- unsigned long, int);
-extern void (*xpc_request_partition_reactivation) (struct xpc_partition *);
-extern void (*xpc_request_partition_deactivation) (struct xpc_partition *);
-extern void (*xpc_cancel_partition_deactivation_request) (
- struct xpc_partition *);
-extern void (*xpc_process_activate_IRQ_rcvd) (void);
-extern enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *);
-extern void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *);
-
-extern void (*xpc_indicate_partition_engaged) (struct xpc_partition *);
-extern int (*xpc_partition_engaged) (short);
-extern int (*xpc_any_partition_engaged) (void);
-extern void (*xpc_indicate_partition_disengaged) (struct xpc_partition *);
-extern void (*xpc_assume_partition_disengaged) (short);
-
-extern void (*xpc_send_chctl_closerequest) (struct xpc_channel *,
- unsigned long *);
-extern void (*xpc_send_chctl_closereply) (struct xpc_channel *,
- unsigned long *);
-extern void (*xpc_send_chctl_openrequest) (struct xpc_channel *,
- unsigned long *);
-extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *);
-
-extern enum xp_retval (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *,
- unsigned long);
-
-extern enum xp_retval (*xpc_send_payload) (struct xpc_channel *, u32, void *,
- u16, u8, xpc_notify_func, void *);
-extern void (*xpc_received_payload) (struct xpc_channel *, void *);
/* found in xpc_sn2.c */
extern int xpc_init_sn2(void);
@@ -909,40 +933,6 @@
extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval);
extern void xpc_partition_going_down(struct xpc_partition *, enum xp_retval);
-static inline int
-xpc_hb_allowed(short partid, void *heartbeating_to_mask)
-{
- return test_bit(partid, heartbeating_to_mask);
-}
-
-static inline int
-xpc_any_hbs_allowed(void)
-{
- DBUG_ON(xpc_heartbeating_to_mask == NULL);
- return !bitmap_empty(xpc_heartbeating_to_mask, xp_max_npartitions);
-}
-
-static inline void
-xpc_allow_hb(short partid)
-{
- DBUG_ON(xpc_heartbeating_to_mask == NULL);
- set_bit(partid, xpc_heartbeating_to_mask);
-}
-
-static inline void
-xpc_disallow_hb(short partid)
-{
- DBUG_ON(xpc_heartbeating_to_mask == NULL);
- clear_bit(partid, xpc_heartbeating_to_mask);
-}
-
-static inline void
-xpc_disallow_all_hbs(void)
-{
- DBUG_ON(xpc_heartbeating_to_mask == NULL);
- bitmap_zero(xpc_heartbeating_to_mask, xp_max_npartitions);
-}
-
static inline void
xpc_wakeup_channel_mgr(struct xpc_partition *part)
{
diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
index 99a2534..652593f 100644
--- a/drivers/misc/sgi-xp/xpc_channel.c
+++ b/drivers/misc/sgi-xp/xpc_channel.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
@@ -39,34 +39,38 @@
if (!(ch->flags & XPC_C_SETUP)) {
spin_unlock_irqrestore(&ch->lock, *irq_flags);
- ret = xpc_setup_msg_structures(ch);
+ ret = xpc_arch_ops.setup_msg_structures(ch);
spin_lock_irqsave(&ch->lock, *irq_flags);
if (ret != xpSuccess)
XPC_DISCONNECT_CHANNEL(ch, ret, irq_flags);
+ else
+ ch->flags |= XPC_C_SETUP;
- ch->flags |= XPC_C_SETUP;
-
- if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
+ if (ch->flags & XPC_C_DISCONNECTING)
return;
}
if (!(ch->flags & XPC_C_OPENREPLY)) {
ch->flags |= XPC_C_OPENREPLY;
- xpc_send_chctl_openreply(ch, irq_flags);
+ xpc_arch_ops.send_chctl_openreply(ch, irq_flags);
}
if (!(ch->flags & XPC_C_ROPENREPLY))
return;
- ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP); /* clear all else */
+ if (!(ch->flags & XPC_C_OPENCOMPLETE)) {
+ ch->flags |= (XPC_C_OPENCOMPLETE | XPC_C_CONNECTED);
+ xpc_arch_ops.send_chctl_opencomplete(ch, irq_flags);
+ }
+
+ if (!(ch->flags & XPC_C_ROPENCOMPLETE))
+ return;
dev_info(xpc_chan, "channel %d to partition %d connected\n",
ch->number, ch->partid);
- spin_unlock_irqrestore(&ch->lock, *irq_flags);
- xpc_create_kthreads(ch, 1, 0);
- spin_lock_irqsave(&ch->lock, *irq_flags);
+ ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP); /* clear all else */
}
/*
@@ -96,7 +100,7 @@
if (part->act_state == XPC_P_AS_DEACTIVATING) {
/* can't proceed until the other side disengages from us */
- if (xpc_partition_engaged(ch->partid))
+ if (xpc_arch_ops.partition_engaged(ch->partid))
return;
} else {
@@ -108,7 +112,7 @@
if (!(ch->flags & XPC_C_CLOSEREPLY)) {
ch->flags |= XPC_C_CLOSEREPLY;
- xpc_send_chctl_closereply(ch, irq_flags);
+ xpc_arch_ops.send_chctl_closereply(ch, irq_flags);
}
if (!(ch->flags & XPC_C_RCLOSEREPLY))
@@ -118,7 +122,7 @@
/* wake those waiting for notify completion */
if (atomic_read(&ch->n_to_notify) > 0) {
/* we do callout while holding ch->lock, callout can't block */
- xpc_notify_senders_of_disconnect(ch);
+ xpc_arch_ops.notify_senders_of_disconnect(ch);
}
/* both sides are disconnected now */
@@ -132,7 +136,7 @@
DBUG_ON(atomic_read(&ch->n_to_notify) != 0);
/* it's now safe to free the channel's message queues */
- xpc_teardown_msg_structures(ch);
+ xpc_arch_ops.teardown_msg_structures(ch);
ch->func = NULL;
ch->key = NULL;
@@ -144,8 +148,9 @@
/*
* Mark the channel disconnected and clear all other flags, including
- * XPC_C_SETUP (because of call to xpc_teardown_msg_structures()) but
- * not including XPC_C_WDISCONNECT (if it was set).
+ * XPC_C_SETUP (because of call to
+ * xpc_arch_ops.teardown_msg_structures()) but not including
+ * XPC_C_WDISCONNECT (if it was set).
*/
ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT));
@@ -184,6 +189,7 @@
struct xpc_channel *ch = &part->channels[ch_number];
enum xp_retval reason;
enum xp_retval ret;
+ int create_kthread = 0;
spin_lock_irqsave(&ch->lock, irq_flags);
@@ -196,8 +202,7 @@
* has had a chance to see that the channel is disconnected.
*/
ch->delayed_chctl_flags |= chctl_flags;
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
if (chctl_flags & XPC_CHCTL_CLOSEREQUEST) {
@@ -239,8 +244,7 @@
XPC_CHCTL_CLOSEREQUEST;
spin_unlock(&part->chctl_lock);
}
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
XPC_SET_REASON(ch, 0, 0);
@@ -250,7 +254,8 @@
ch->flags |= (XPC_C_CONNECTING | XPC_C_ROPENREQUEST);
}
- chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY);
+ chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY |
+ XPC_CHCTL_OPENCOMPLETE);
/*
* The meaningful CLOSEREQUEST connection state fields are:
@@ -269,8 +274,7 @@
XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
DBUG_ON(chctl_flags & XPC_CHCTL_CLOSEREPLY);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
xpc_process_disconnect(ch, &irq_flags);
@@ -283,8 +287,7 @@
if (ch->flags & XPC_C_DISCONNECTED) {
DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST));
@@ -299,8 +302,7 @@
XPC_CHCTL_CLOSEREPLY;
spin_unlock(&part->chctl_lock);
}
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
ch->flags |= XPC_C_RCLOSEREPLY;
@@ -320,14 +322,12 @@
if (part->act_state == XPC_P_AS_DEACTIVATING ||
(ch->flags & XPC_C_ROPENREQUEST)) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) {
ch->delayed_chctl_flags |= XPC_CHCTL_OPENREQUEST;
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
DBUG_ON(!(ch->flags & (XPC_C_DISCONNECTED |
XPC_C_OPENREQUEST)));
@@ -341,8 +341,7 @@
*/
if (args->entry_size == 0 || args->local_nentries == 0) {
/* assume OPENREQUEST was delayed by mistake */
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
ch->flags |= (XPC_C_ROPENREQUEST | XPC_C_CONNECTING);
@@ -352,8 +351,7 @@
if (args->entry_size != ch->entry_size) {
XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes,
&irq_flags);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
} else {
ch->entry_size = args->entry_size;
@@ -375,15 +373,13 @@
args->local_msgqueue_pa, args->local_nentries,
args->remote_nentries, ch->partid, ch->number);
- if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
- }
+ if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED))
+ goto out;
+
if (!(ch->flags & XPC_C_OPENREQUEST)) {
XPC_DISCONNECT_CHANNEL(ch, xpOpenCloseError,
&irq_flags);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST));
@@ -400,11 +396,11 @@
DBUG_ON(args->local_nentries == 0);
DBUG_ON(args->remote_nentries == 0);
- ret = xpc_save_remote_msgqueue_pa(ch, args->local_msgqueue_pa);
+ ret = xpc_arch_ops.save_remote_msgqueue_pa(ch,
+ args->local_msgqueue_pa);
if (ret != xpSuccess) {
XPC_DISCONNECT_CHANNEL(ch, ret, &irq_flags);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
ch->flags |= XPC_C_ROPENREPLY;
@@ -430,7 +426,36 @@
xpc_process_connect(ch, &irq_flags);
}
+ if (chctl_flags & XPC_CHCTL_OPENCOMPLETE) {
+
+ dev_dbg(xpc_chan, "XPC_CHCTL_OPENCOMPLETE received from "
+ "partid=%d, channel=%d\n", ch->partid, ch->number);
+
+ if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED))
+ goto out;
+
+ if (!(ch->flags & XPC_C_OPENREQUEST) ||
+ !(ch->flags & XPC_C_OPENREPLY)) {
+ XPC_DISCONNECT_CHANNEL(ch, xpOpenCloseError,
+ &irq_flags);
+ goto out;
+ }
+
+ DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST));
+ DBUG_ON(!(ch->flags & XPC_C_ROPENREPLY));
+ DBUG_ON(!(ch->flags & XPC_C_CONNECTED));
+
+ ch->flags |= XPC_C_ROPENCOMPLETE;
+
+ xpc_process_connect(ch, &irq_flags);
+ create_kthread = 1;
+ }
+
+out:
spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+ if (create_kthread)
+ xpc_create_kthreads(ch, 1, 0);
}
/*
@@ -508,7 +533,7 @@
/* initiate the connection */
ch->flags |= (XPC_C_OPENREQUEST | XPC_C_CONNECTING);
- xpc_send_chctl_openrequest(ch, &irq_flags);
+ xpc_arch_ops.send_chctl_openrequest(ch, &irq_flags);
xpc_process_connect(ch, &irq_flags);
@@ -526,7 +551,7 @@
int ch_number;
u32 ch_flags;
- chctl.all_flags = xpc_get_chctl_all_flags(part);
+ chctl.all_flags = xpc_arch_ops.get_chctl_all_flags(part);
/*
* Initiate channel connections for registered channels.
@@ -564,10 +589,6 @@
if (!(ch_flags & XPC_C_OPENREQUEST)) {
DBUG_ON(ch_flags & XPC_C_SETUP);
(void)xpc_connect_channel(ch);
- } else {
- spin_lock_irqsave(&ch->lock, irq_flags);
- xpc_process_connect(ch, &irq_flags);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
}
continue;
}
@@ -579,7 +600,7 @@
*/
if (chctl.flags[ch_number] & XPC_MSG_CHCTL_FLAGS)
- xpc_process_msg_chctl_flags(part, ch_number);
+ xpc_arch_ops.process_msg_chctl_flags(part, ch_number);
}
}
@@ -755,7 +776,7 @@
XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY |
XPC_C_CONNECTING | XPC_C_CONNECTED);
- xpc_send_chctl_closerequest(ch, irq_flags);
+ xpc_arch_ops.send_chctl_closerequest(ch, irq_flags);
if (channel_was_connected)
ch->flags |= XPC_C_WASCONNECTED;
@@ -862,8 +883,8 @@
DBUG_ON(payload == NULL);
if (xpc_part_ref(part)) {
- ret = xpc_send_payload(&part->channels[ch_number], flags,
- payload, payload_size, 0, NULL, NULL);
+ ret = xpc_arch_ops.send_payload(&part->channels[ch_number],
+ flags, payload, payload_size, 0, NULL, NULL);
xpc_part_deref(part);
}
@@ -914,9 +935,8 @@
DBUG_ON(func == NULL);
if (xpc_part_ref(part)) {
- ret = xpc_send_payload(&part->channels[ch_number], flags,
- payload, payload_size, XPC_N_CALL, func,
- key);
+ ret = xpc_arch_ops.send_payload(&part->channels[ch_number],
+ flags, payload, payload_size, XPC_N_CALL, func, key);
xpc_part_deref(part);
}
return ret;
@@ -930,7 +950,7 @@
{
void *payload;
- payload = xpc_get_deliverable_payload(ch);
+ payload = xpc_arch_ops.get_deliverable_payload(ch);
if (payload != NULL) {
/*
@@ -984,7 +1004,7 @@
DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
ch = &part->channels[ch_number];
- xpc_received_payload(ch, payload);
+ xpc_arch_ops.received_payload(ch, payload);
/* the call to xpc_msgqueue_ref() was done by xpc_deliver_payload() */
xpc_msgqueue_deref(ch);
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index 1ab9fda..fd3688a 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
@@ -150,7 +150,6 @@
static unsigned long xpc_hb_check_timeout;
static struct timer_list xpc_hb_timer;
-void *xpc_heartbeating_to_mask;
/* notification that the xpc_hb_checker thread has exited */
static DECLARE_COMPLETION(xpc_hb_checker_exited);
@@ -170,62 +169,7 @@
.notifier_call = xpc_system_die,
};
-int (*xpc_setup_partitions_sn) (void);
-void (*xpc_teardown_partitions_sn) (void);
-enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie,
- unsigned long *rp_pa,
- size_t *len);
-int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *rp);
-void (*xpc_heartbeat_init) (void);
-void (*xpc_heartbeat_exit) (void);
-void (*xpc_increment_heartbeat) (void);
-void (*xpc_offline_heartbeat) (void);
-void (*xpc_online_heartbeat) (void);
-enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *part);
-
-enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part);
-void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch);
-u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part);
-enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *ch);
-void (*xpc_teardown_msg_structures) (struct xpc_channel *ch);
-void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number);
-int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *ch);
-void *(*xpc_get_deliverable_payload) (struct xpc_channel *ch);
-
-void (*xpc_request_partition_activation) (struct xpc_rsvd_page *remote_rp,
- unsigned long remote_rp_pa,
- int nasid);
-void (*xpc_request_partition_reactivation) (struct xpc_partition *part);
-void (*xpc_request_partition_deactivation) (struct xpc_partition *part);
-void (*xpc_cancel_partition_deactivation_request) (struct xpc_partition *part);
-
-void (*xpc_process_activate_IRQ_rcvd) (void);
-enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *part);
-void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *part);
-
-void (*xpc_indicate_partition_engaged) (struct xpc_partition *part);
-int (*xpc_partition_engaged) (short partid);
-int (*xpc_any_partition_engaged) (void);
-void (*xpc_indicate_partition_disengaged) (struct xpc_partition *part);
-void (*xpc_assume_partition_disengaged) (short partid);
-
-void (*xpc_send_chctl_closerequest) (struct xpc_channel *ch,
- unsigned long *irq_flags);
-void (*xpc_send_chctl_closereply) (struct xpc_channel *ch,
- unsigned long *irq_flags);
-void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch,
- unsigned long *irq_flags);
-void (*xpc_send_chctl_openreply) (struct xpc_channel *ch,
- unsigned long *irq_flags);
-
-enum xp_retval (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch,
- unsigned long msgqueue_pa);
-
-enum xp_retval (*xpc_send_payload) (struct xpc_channel *ch, u32 flags,
- void *payload, u16 payload_size,
- u8 notify_type, xpc_notify_func func,
- void *key);
-void (*xpc_received_payload) (struct xpc_channel *ch, void *payload);
+struct xpc_arch_operations xpc_arch_ops;
/*
* Timer function to enforce the timelimit on the partition disengage.
@@ -240,7 +184,7 @@
(void)xpc_partition_disengaged(part);
DBUG_ON(part->disengage_timeout != 0);
- DBUG_ON(xpc_partition_engaged(XPC_PARTID(part)));
+ DBUG_ON(xpc_arch_ops.partition_engaged(XPC_PARTID(part)));
}
/*
@@ -251,7 +195,7 @@
static void
xpc_hb_beater(unsigned long dummy)
{
- xpc_increment_heartbeat();
+ xpc_arch_ops.increment_heartbeat();
if (time_is_before_eq_jiffies(xpc_hb_check_timeout))
wake_up_interruptible(&xpc_activate_IRQ_wq);
@@ -263,7 +207,7 @@
static void
xpc_start_hb_beater(void)
{
- xpc_heartbeat_init();
+ xpc_arch_ops.heartbeat_init();
init_timer(&xpc_hb_timer);
xpc_hb_timer.function = xpc_hb_beater;
xpc_hb_beater(0);
@@ -273,7 +217,7 @@
xpc_stop_hb_beater(void)
{
del_timer_sync(&xpc_hb_timer);
- xpc_heartbeat_exit();
+ xpc_arch_ops.heartbeat_exit();
}
/*
@@ -302,7 +246,7 @@
continue;
}
- ret = xpc_get_remote_heartbeat(part);
+ ret = xpc_arch_ops.get_remote_heartbeat(part);
if (ret != xpSuccess)
XPC_DEACTIVATE_PARTITION(part, ret);
}
@@ -353,7 +297,7 @@
force_IRQ = 0;
dev_dbg(xpc_part, "processing activate IRQs "
"received\n");
- xpc_process_activate_IRQ_rcvd();
+ xpc_arch_ops.process_activate_IRQ_rcvd();
}
/* wait for IRQ or timeout */
@@ -528,7 +472,7 @@
init_waitqueue_head(&ch->idle_wq);
}
- ret = xpc_setup_ch_structures_sn(part);
+ ret = xpc_arch_ops.setup_ch_structures(part);
if (ret != xpSuccess)
goto out_2;
@@ -572,7 +516,7 @@
/* now we can begin tearing down the infrastructure */
- xpc_teardown_ch_structures_sn(part);
+ xpc_arch_ops.teardown_ch_structures(part);
kfree(part->remote_openclose_args_base);
part->remote_openclose_args = NULL;
@@ -620,12 +564,12 @@
dev_dbg(xpc_part, "activating partition %d\n", partid);
- xpc_allow_hb(partid);
+ xpc_arch_ops.allow_hb(partid);
if (xpc_setup_ch_structures(part) == xpSuccess) {
(void)xpc_part_ref(part); /* this will always succeed */
- if (xpc_make_first_contact(part) == xpSuccess) {
+ if (xpc_arch_ops.make_first_contact(part) == xpSuccess) {
xpc_mark_partition_active(part);
xpc_channel_mgr(part);
/* won't return until partition is deactivating */
@@ -635,12 +579,12 @@
xpc_teardown_ch_structures(part);
}
- xpc_disallow_hb(partid);
+ xpc_arch_ops.disallow_hb(partid);
xpc_mark_partition_inactive(part);
if (part->reason == xpReactivating) {
/* interrupting ourselves results in activating partition */
- xpc_request_partition_reactivation(part);
+ xpc_arch_ops.request_partition_reactivation(part);
}
return 0;
@@ -713,10 +657,13 @@
static void
xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
{
+ int (*n_of_deliverable_payloads) (struct xpc_channel *) =
+ xpc_arch_ops.n_of_deliverable_payloads;
+
do {
/* deliver messages to their intended recipients */
- while (xpc_n_of_deliverable_payloads(ch) > 0 &&
+ while (n_of_deliverable_payloads(ch) > 0 &&
!(ch->flags & XPC_C_DISCONNECTING)) {
xpc_deliver_payload(ch);
}
@@ -732,7 +679,7 @@
"wait_event_interruptible_exclusive()\n");
(void)wait_event_interruptible_exclusive(ch->idle_wq,
- (xpc_n_of_deliverable_payloads(ch) > 0 ||
+ (n_of_deliverable_payloads(ch) > 0 ||
(ch->flags & XPC_C_DISCONNECTING)));
atomic_dec(&ch->kthreads_idle);
@@ -749,6 +696,8 @@
struct xpc_channel *ch;
int n_needed;
unsigned long irq_flags;
+ int (*n_of_deliverable_payloads) (struct xpc_channel *) =
+ xpc_arch_ops.n_of_deliverable_payloads;
dev_dbg(xpc_chan, "kthread starting, partid=%d, channel=%d\n",
partid, ch_number);
@@ -777,7 +726,7 @@
* additional kthreads to help deliver them. We only
* need one less than total #of messages to deliver.
*/
- n_needed = xpc_n_of_deliverable_payloads(ch) - 1;
+ n_needed = n_of_deliverable_payloads(ch) - 1;
if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING))
xpc_activate_kthreads(ch, n_needed);
@@ -805,7 +754,7 @@
if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
atomic_dec_return(&part->nchannels_engaged) == 0) {
- xpc_indicate_partition_disengaged(part);
+ xpc_arch_ops.indicate_partition_disengaged(part);
}
xpc_msgqueue_deref(ch);
@@ -837,6 +786,8 @@
u64 args = XPC_PACK_ARGS(ch->partid, ch->number);
struct xpc_partition *part = &xpc_partitions[ch->partid];
struct task_struct *kthread;
+ void (*indicate_partition_disengaged) (struct xpc_partition *) =
+ xpc_arch_ops.indicate_partition_disengaged;
while (needed-- > 0) {
@@ -858,7 +809,7 @@
} else if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
atomic_inc_return(&part->nchannels_engaged) == 1) {
- xpc_indicate_partition_engaged(part);
+ xpc_arch_ops.indicate_partition_engaged(part);
}
(void)xpc_part_ref(part);
xpc_msgqueue_ref(ch);
@@ -880,7 +831,7 @@
if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
atomic_dec_return(&part->nchannels_engaged) == 0) {
- xpc_indicate_partition_disengaged(part);
+ indicate_partition_disengaged(part);
}
xpc_msgqueue_deref(ch);
xpc_part_deref(part);
@@ -993,13 +944,13 @@
atomic_set(&part->references, 0);
}
- return xpc_setup_partitions_sn();
+ return xpc_arch_ops.setup_partitions();
}
static void
xpc_teardown_partitions(void)
{
- xpc_teardown_partitions_sn();
+ xpc_arch_ops.teardown_partitions();
kfree(xpc_partitions);
}
@@ -1055,7 +1006,7 @@
disengage_timeout = part->disengage_timeout;
}
- if (xpc_any_partition_engaged()) {
+ if (xpc_arch_ops.any_partition_engaged()) {
if (time_is_before_jiffies(printmsg_time)) {
dev_info(xpc_part, "waiting for remote "
"partitions to deactivate, timeout in "
@@ -1086,8 +1037,7 @@
} while (1);
- DBUG_ON(xpc_any_partition_engaged());
- DBUG_ON(xpc_any_hbs_allowed() != 0);
+ DBUG_ON(xpc_arch_ops.any_partition_engaged());
xpc_teardown_rsvd_page();
@@ -1152,15 +1102,15 @@
/* keep xpc_hb_checker thread from doing anything (just in case) */
xpc_exiting = 1;
- xpc_disallow_all_hbs(); /*indicate we're deactivated */
+ xpc_arch_ops.disallow_all_hbs(); /*indicate we're deactivated */
for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
- if (xpc_partition_engaged(partid) ||
+ if (xpc_arch_ops.partition_engaged(partid) ||
part->act_state != XPC_P_AS_INACTIVE) {
- xpc_request_partition_deactivation(part);
- xpc_indicate_partition_disengaged(part);
+ xpc_arch_ops.request_partition_deactivation(part);
+ xpc_arch_ops.indicate_partition_disengaged(part);
}
}
@@ -1177,7 +1127,7 @@
wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5;
while (1) {
- any_engaged = xpc_any_partition_engaged();
+ any_engaged = xpc_arch_ops.any_partition_engaged();
if (!any_engaged) {
dev_info(xpc_part, "all partitions have deactivated\n");
break;
@@ -1186,7 +1136,7 @@
if (!keep_waiting--) {
for (partid = 0; partid < xp_max_npartitions;
partid++) {
- if (xpc_partition_engaged(partid)) {
+ if (xpc_arch_ops.partition_engaged(partid)) {
dev_info(xpc_part, "deactivate from "
"remote partition %d timed "
"out\n", partid);
@@ -1233,7 +1183,7 @@
/* fall through */
case DIE_MCA_MONARCH_ENTER:
case DIE_INIT_MONARCH_ENTER:
- xpc_offline_heartbeat();
+ xpc_arch_ops.offline_heartbeat();
break;
case DIE_KDEBUG_LEAVE:
@@ -1244,7 +1194,7 @@
/* fall through */
case DIE_MCA_MONARCH_LEAVE:
case DIE_INIT_MONARCH_LEAVE:
- xpc_online_heartbeat();
+ xpc_arch_ops.online_heartbeat();
break;
}
#else
diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c
index 6722f6f..65877bc 100644
--- a/drivers/misc/sgi-xp/xpc_partition.c
+++ b/drivers/misc/sgi-xp/xpc_partition.c
@@ -70,6 +70,9 @@
size_t buf_len = 0;
void *buf = buf;
void *buf_base = NULL;
+ enum xp_retval (*get_partition_rsvd_page_pa)
+ (void *, u64 *, unsigned long *, size_t *) =
+ xpc_arch_ops.get_partition_rsvd_page_pa;
while (1) {
@@ -79,8 +82,7 @@
* ??? function or have two versions? Rename rp_pa for UV to
* ??? rp_gpa?
*/
- ret = xpc_get_partition_rsvd_page_pa(buf, &cookie, &rp_pa,
- &len);
+ ret = get_partition_rsvd_page_pa(buf, &cookie, &rp_pa, &len);
dev_dbg(xpc_part, "SAL returned with ret=%d, cookie=0x%016lx, "
"address=0x%016lx, len=0x%016lx\n", ret,
@@ -172,7 +174,7 @@
xpc_part_nasids = XPC_RP_PART_NASIDS(rp);
xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp);
- ret = xpc_setup_rsvd_page_sn(rp);
+ ret = xpc_arch_ops.setup_rsvd_page(rp);
if (ret != 0)
return ret;
@@ -264,7 +266,7 @@
short partid = XPC_PARTID(part);
int disengaged;
- disengaged = !xpc_partition_engaged(partid);
+ disengaged = !xpc_arch_ops.partition_engaged(partid);
if (part->disengage_timeout) {
if (!disengaged) {
if (time_is_after_jiffies(part->disengage_timeout)) {
@@ -280,7 +282,7 @@
dev_info(xpc_part, "deactivate request to remote "
"partition %d timed out\n", partid);
xpc_disengage_timedout = 1;
- xpc_assume_partition_disengaged(partid);
+ xpc_arch_ops.assume_partition_disengaged(partid);
disengaged = 1;
}
part->disengage_timeout = 0;
@@ -294,7 +296,7 @@
if (part->act_state != XPC_P_AS_INACTIVE)
xpc_wakeup_channel_mgr(part);
- xpc_cancel_partition_deactivation_request(part);
+ xpc_arch_ops.cancel_partition_deactivation_request(part);
}
return disengaged;
}
@@ -339,7 +341,7 @@
spin_unlock_irqrestore(&part->act_lock, irq_flags);
if (reason == xpReactivating) {
/* we interrupt ourselves to reactivate partition */
- xpc_request_partition_reactivation(part);
+ xpc_arch_ops.request_partition_reactivation(part);
}
return;
}
@@ -358,7 +360,7 @@
spin_unlock_irqrestore(&part->act_lock, irq_flags);
/* ask remote partition to deactivate with regard to us */
- xpc_request_partition_deactivation(part);
+ xpc_arch_ops.request_partition_deactivation(part);
/* set a timelimit on the disengage phase of the deactivation request */
part->disengage_timeout = jiffies + (xpc_disengage_timelimit * HZ);
@@ -496,7 +498,7 @@
continue;
}
- xpc_request_partition_activation(remote_rp,
+ xpc_arch_ops.request_partition_activation(remote_rp,
remote_rp_pa, nasid);
}
}
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
index eaaa964..915a3b4 100644
--- a/drivers/misc/sgi-xp/xpc_sn2.c
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2008-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
@@ -60,14 +60,14 @@
static struct xpc_vars_part_sn2 *xpc_vars_part_sn2;
static int
-xpc_setup_partitions_sn_sn2(void)
+xpc_setup_partitions_sn2(void)
{
/* nothing needs to be done */
return 0;
}
static void
-xpc_teardown_partitions_sn_sn2(void)
+xpc_teardown_partitions_sn2(void)
{
/* nothing needs to be done */
}
@@ -431,6 +431,13 @@
}
static void
+xpc_send_chctl_opencomplete_sn2(struct xpc_channel *ch,
+ unsigned long *irq_flags)
+{
+ XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENCOMPLETE, irq_flags);
+}
+
+static void
xpc_send_chctl_msgrequest_sn2(struct xpc_channel *ch)
{
XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST, NULL);
@@ -621,7 +628,7 @@
static int
-xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp)
+xpc_setup_rsvd_page_sn2(struct xpc_rsvd_page *rp)
{
struct amo *amos_page;
int i;
@@ -629,7 +636,7 @@
xpc_vars_sn2 = XPC_RP_VARS(rp);
- rp->sn.vars_pa = xp_pa(xpc_vars_sn2);
+ rp->sn.sn2.vars_pa = xp_pa(xpc_vars_sn2);
/* vars_part array follows immediately after vars */
xpc_vars_part_sn2 = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) +
@@ -693,6 +700,33 @@
return 0;
}
+static int
+xpc_hb_allowed_sn2(short partid, void *heartbeating_to_mask)
+{
+ return test_bit(partid, heartbeating_to_mask);
+}
+
+static void
+xpc_allow_hb_sn2(short partid)
+{
+ DBUG_ON(xpc_vars_sn2 == NULL);
+ set_bit(partid, xpc_vars_sn2->heartbeating_to_mask);
+}
+
+static void
+xpc_disallow_hb_sn2(short partid)
+{
+ DBUG_ON(xpc_vars_sn2 == NULL);
+ clear_bit(partid, xpc_vars_sn2->heartbeating_to_mask);
+}
+
+static void
+xpc_disallow_all_hbs_sn2(void)
+{
+ DBUG_ON(xpc_vars_sn2 == NULL);
+ bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, xp_max_npartitions);
+}
+
static void
xpc_increment_heartbeat_sn2(void)
{
@@ -719,7 +753,6 @@
DBUG_ON(xpc_vars_sn2 == NULL);
bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2);
- xpc_heartbeating_to_mask = &xpc_vars_sn2->heartbeating_to_mask[0];
xpc_online_heartbeat_sn2();
}
@@ -751,9 +784,9 @@
remote_vars->heartbeating_to_mask[0]);
if ((remote_vars->heartbeat == part->last_heartbeat &&
- remote_vars->heartbeat_offline == 0) ||
- !xpc_hb_allowed(sn_partition_id,
- &remote_vars->heartbeating_to_mask)) {
+ !remote_vars->heartbeat_offline) ||
+ !xpc_hb_allowed_sn2(sn_partition_id,
+ remote_vars->heartbeating_to_mask)) {
ret = xpNoHeartbeat;
} else {
part->last_heartbeat = remote_vars->heartbeat;
@@ -972,7 +1005,7 @@
return;
}
- remote_vars_pa = remote_rp->sn.vars_pa;
+ remote_vars_pa = remote_rp->sn.sn2.vars_pa;
remote_rp_version = remote_rp->version;
remote_rp_ts_jiffies = remote_rp->ts_jiffies;
@@ -1129,7 +1162,7 @@
* Setup the channel structures that are sn2 specific.
*/
static enum xp_retval
-xpc_setup_ch_structures_sn_sn2(struct xpc_partition *part)
+xpc_setup_ch_structures_sn2(struct xpc_partition *part)
{
struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
struct xpc_channel_sn2 *ch_sn2;
@@ -1251,7 +1284,7 @@
* Teardown the channel structures that are sn2 specific.
*/
static void
-xpc_teardown_ch_structures_sn_sn2(struct xpc_partition *part)
+xpc_teardown_ch_structures_sn2(struct xpc_partition *part)
{
struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
short partid = XPC_PARTID(part);
@@ -2315,61 +2348,70 @@
xpc_acknowledge_msgs_sn2(ch, get, msg->flags);
}
+static struct xpc_arch_operations xpc_arch_ops_sn2 = {
+ .setup_partitions = xpc_setup_partitions_sn2,
+ .teardown_partitions = xpc_teardown_partitions_sn2,
+ .process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2,
+ .get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2,
+ .setup_rsvd_page = xpc_setup_rsvd_page_sn2,
+
+ .allow_hb = xpc_allow_hb_sn2,
+ .disallow_hb = xpc_disallow_hb_sn2,
+ .disallow_all_hbs = xpc_disallow_all_hbs_sn2,
+ .increment_heartbeat = xpc_increment_heartbeat_sn2,
+ .offline_heartbeat = xpc_offline_heartbeat_sn2,
+ .online_heartbeat = xpc_online_heartbeat_sn2,
+ .heartbeat_init = xpc_heartbeat_init_sn2,
+ .heartbeat_exit = xpc_heartbeat_exit_sn2,
+ .get_remote_heartbeat = xpc_get_remote_heartbeat_sn2,
+
+ .request_partition_activation =
+ xpc_request_partition_activation_sn2,
+ .request_partition_reactivation =
+ xpc_request_partition_reactivation_sn2,
+ .request_partition_deactivation =
+ xpc_request_partition_deactivation_sn2,
+ .cancel_partition_deactivation_request =
+ xpc_cancel_partition_deactivation_request_sn2,
+
+ .setup_ch_structures = xpc_setup_ch_structures_sn2,
+ .teardown_ch_structures = xpc_teardown_ch_structures_sn2,
+
+ .make_first_contact = xpc_make_first_contact_sn2,
+
+ .get_chctl_all_flags = xpc_get_chctl_all_flags_sn2,
+ .send_chctl_closerequest = xpc_send_chctl_closerequest_sn2,
+ .send_chctl_closereply = xpc_send_chctl_closereply_sn2,
+ .send_chctl_openrequest = xpc_send_chctl_openrequest_sn2,
+ .send_chctl_openreply = xpc_send_chctl_openreply_sn2,
+ .send_chctl_opencomplete = xpc_send_chctl_opencomplete_sn2,
+ .process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2,
+
+ .save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2,
+
+ .setup_msg_structures = xpc_setup_msg_structures_sn2,
+ .teardown_msg_structures = xpc_teardown_msg_structures_sn2,
+
+ .indicate_partition_engaged = xpc_indicate_partition_engaged_sn2,
+ .indicate_partition_disengaged = xpc_indicate_partition_disengaged_sn2,
+ .partition_engaged = xpc_partition_engaged_sn2,
+ .any_partition_engaged = xpc_any_partition_engaged_sn2,
+ .assume_partition_disengaged = xpc_assume_partition_disengaged_sn2,
+
+ .n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2,
+ .send_payload = xpc_send_payload_sn2,
+ .get_deliverable_payload = xpc_get_deliverable_payload_sn2,
+ .received_payload = xpc_received_payload_sn2,
+ .notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2,
+};
+
int
xpc_init_sn2(void)
{
int ret;
size_t buf_size;
- xpc_setup_partitions_sn = xpc_setup_partitions_sn_sn2;
- xpc_teardown_partitions_sn = xpc_teardown_partitions_sn_sn2;
- xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2;
- xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_sn2;
- xpc_increment_heartbeat = xpc_increment_heartbeat_sn2;
- xpc_offline_heartbeat = xpc_offline_heartbeat_sn2;
- xpc_online_heartbeat = xpc_online_heartbeat_sn2;
- xpc_heartbeat_init = xpc_heartbeat_init_sn2;
- xpc_heartbeat_exit = xpc_heartbeat_exit_sn2;
- xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_sn2;
-
- xpc_request_partition_activation = xpc_request_partition_activation_sn2;
- xpc_request_partition_reactivation =
- xpc_request_partition_reactivation_sn2;
- xpc_request_partition_deactivation =
- xpc_request_partition_deactivation_sn2;
- xpc_cancel_partition_deactivation_request =
- xpc_cancel_partition_deactivation_request_sn2;
-
- xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2;
- xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_sn2;
- xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_sn2;
- xpc_make_first_contact = xpc_make_first_contact_sn2;
-
- xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_sn2;
- xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_sn2;
- xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2;
- xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2;
- xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2;
-
- xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2;
-
- xpc_setup_msg_structures = xpc_setup_msg_structures_sn2;
- xpc_teardown_msg_structures = xpc_teardown_msg_structures_sn2;
-
- xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2;
- xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2;
- xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2;
- xpc_get_deliverable_payload = xpc_get_deliverable_payload_sn2;
-
- xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_sn2;
- xpc_indicate_partition_disengaged =
- xpc_indicate_partition_disengaged_sn2;
- xpc_partition_engaged = xpc_partition_engaged_sn2;
- xpc_any_partition_engaged = xpc_any_partition_engaged_sn2;
- xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_sn2;
-
- xpc_send_payload = xpc_send_payload_sn2;
- xpc_received_payload = xpc_received_payload_sn2;
+ xpc_arch_ops = xpc_arch_ops_sn2;
if (offsetof(struct xpc_msg_sn2, payload) > XPC_MSG_HDR_MAX_SIZE) {
dev_err(xpc_part, "header portion of struct xpc_msg_sn2 is "
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index f7fff47..9172fcd 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -46,8 +46,7 @@
};
#endif
-static atomic64_t xpc_heartbeat_uv;
-static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
+static struct xpc_heartbeat_uv *xpc_heartbeat_uv;
#define XPC_ACTIVATE_MSG_SIZE_UV (1 * GRU_CACHE_LINE_BYTES)
#define XPC_ACTIVATE_MQ_SIZE_UV (4 * XP_MAX_NPARTITIONS_UV * \
@@ -63,7 +62,7 @@
static struct xpc_gru_mq_uv *xpc_notify_mq_uv;
static int
-xpc_setup_partitions_sn_uv(void)
+xpc_setup_partitions_uv(void)
{
short partid;
struct xpc_partition_uv *part_uv;
@@ -79,7 +78,7 @@
}
static void
-xpc_teardown_partitions_sn_uv(void)
+xpc_teardown_partitions_uv(void)
{
short partid;
struct xpc_partition_uv *part_uv;
@@ -423,41 +422,6 @@
/* syncing of remote_act_state was just done above */
break;
- case XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV: {
- struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
-
- msg = container_of(msg_hdr,
- struct xpc_activate_mq_msg_heartbeat_req_uv,
- hdr);
- part_uv->heartbeat = msg->heartbeat;
- break;
- }
- case XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV: {
- struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
-
- msg = container_of(msg_hdr,
- struct xpc_activate_mq_msg_heartbeat_req_uv,
- hdr);
- part_uv->heartbeat = msg->heartbeat;
-
- spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
- part_uv->flags |= XPC_P_HEARTBEAT_OFFLINE_UV;
- spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
- break;
- }
- case XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV: {
- struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
-
- msg = container_of(msg_hdr,
- struct xpc_activate_mq_msg_heartbeat_req_uv,
- hdr);
- part_uv->heartbeat = msg->heartbeat;
-
- spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
- part_uv->flags &= ~XPC_P_HEARTBEAT_OFFLINE_UV;
- spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
- break;
- }
case XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV: {
struct xpc_activate_mq_msg_activate_req_uv *msg;
@@ -475,6 +439,7 @@
part_uv->act_state_req = XPC_P_ASR_ACTIVATE_UV;
part->remote_rp_pa = msg->rp_gpa; /* !!! _pa is _gpa */
part->remote_rp_ts_jiffies = msg_hdr->rp_ts_jiffies;
+ part_uv->heartbeat_gpa = msg->heartbeat_gpa;
if (msg->activate_gru_mq_desc_gpa !=
part_uv->activate_gru_mq_desc_gpa) {
@@ -569,6 +534,17 @@
xpc_wakeup_channel_mgr(part);
break;
}
+ case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV: {
+ struct xpc_activate_mq_msg_chctl_opencomplete_uv *msg;
+
+ msg = container_of(msg_hdr, struct
+ xpc_activate_mq_msg_chctl_opencomplete_uv, hdr);
+ spin_lock_irqsave(&part->chctl_lock, irq_flags);
+ part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENCOMPLETE;
+ spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+ xpc_wakeup_channel_mgr(part);
+ }
case XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV:
spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
part_uv->flags |= XPC_P_ENGAGED_UV;
@@ -759,7 +735,7 @@
/*
* !!! Make our side think that the remote partition sent an activate
- * !!! message our way by doing what the activate IRQ handler would
+ * !!! mq message our way by doing what the activate IRQ handler would
* !!! do had one really been sent.
*/
@@ -806,90 +782,82 @@
}
static int
-xpc_setup_rsvd_page_sn_uv(struct xpc_rsvd_page *rp)
+xpc_setup_rsvd_page_uv(struct xpc_rsvd_page *rp)
{
- rp->sn.activate_gru_mq_desc_gpa =
+ xpc_heartbeat_uv =
+ &xpc_partitions[sn_partition_id].sn.uv.cached_heartbeat;
+ rp->sn.uv.heartbeat_gpa = uv_gpa(xpc_heartbeat_uv);
+ rp->sn.uv.activate_gru_mq_desc_gpa =
uv_gpa(xpc_activate_mq_uv->gru_mq_desc);
return 0;
}
static void
-xpc_send_heartbeat_uv(int msg_type)
+xpc_allow_hb_uv(short partid)
{
- short partid;
- struct xpc_partition *part;
- struct xpc_activate_mq_msg_heartbeat_req_uv msg;
+}
- /*
- * !!! On uv we're broadcasting a heartbeat message every 5 seconds.
- * !!! Whereas on sn2 we're bte_copy'ng the heartbeat info every 20
- * !!! seconds. This is an increase in numalink traffic.
- * ??? Is this good?
- */
+static void
+xpc_disallow_hb_uv(short partid)
+{
+}
- msg.heartbeat = atomic64_inc_return(&xpc_heartbeat_uv);
-
- partid = find_first_bit(xpc_heartbeating_to_mask_uv,
- XP_MAX_NPARTITIONS_UV);
-
- while (partid < XP_MAX_NPARTITIONS_UV) {
- part = &xpc_partitions[partid];
-
- xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
- msg_type);
-
- partid = find_next_bit(xpc_heartbeating_to_mask_uv,
- XP_MAX_NPARTITIONS_UV, partid + 1);
- }
+static void
+xpc_disallow_all_hbs_uv(void)
+{
}
static void
xpc_increment_heartbeat_uv(void)
{
- xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV);
+ xpc_heartbeat_uv->value++;
}
static void
xpc_offline_heartbeat_uv(void)
{
- xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+ xpc_increment_heartbeat_uv();
+ xpc_heartbeat_uv->offline = 1;
}
static void
xpc_online_heartbeat_uv(void)
{
- xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV);
+ xpc_increment_heartbeat_uv();
+ xpc_heartbeat_uv->offline = 0;
}
static void
xpc_heartbeat_init_uv(void)
{
- atomic64_set(&xpc_heartbeat_uv, 0);
- bitmap_zero(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
- xpc_heartbeating_to_mask = &xpc_heartbeating_to_mask_uv[0];
+ xpc_heartbeat_uv->value = 1;
+ xpc_heartbeat_uv->offline = 0;
}
static void
xpc_heartbeat_exit_uv(void)
{
- xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+ xpc_offline_heartbeat_uv();
}
static enum xp_retval
xpc_get_remote_heartbeat_uv(struct xpc_partition *part)
{
struct xpc_partition_uv *part_uv = &part->sn.uv;
- enum xp_retval ret = xpNoHeartbeat;
+ enum xp_retval ret;
- if (part_uv->remote_act_state != XPC_P_AS_INACTIVE &&
- part_uv->remote_act_state != XPC_P_AS_DEACTIVATING) {
+ ret = xp_remote_memcpy(uv_gpa(&part_uv->cached_heartbeat),
+ part_uv->heartbeat_gpa,
+ sizeof(struct xpc_heartbeat_uv));
+ if (ret != xpSuccess)
+ return ret;
- if (part_uv->heartbeat != part->last_heartbeat ||
- (part_uv->flags & XPC_P_HEARTBEAT_OFFLINE_UV)) {
+ if (part_uv->cached_heartbeat.value == part->last_heartbeat &&
+ !part_uv->cached_heartbeat.offline) {
- part->last_heartbeat = part_uv->heartbeat;
- ret = xpSuccess;
- }
+ ret = xpNoHeartbeat;
+ } else {
+ part->last_heartbeat = part_uv->cached_heartbeat.value;
}
return ret;
}
@@ -904,8 +872,9 @@
part->remote_rp_pa = remote_rp_gpa; /* !!! _pa here is really _gpa */
part->remote_rp_ts_jiffies = remote_rp->ts_jiffies;
+ part->sn.uv.heartbeat_gpa = remote_rp->sn.uv.heartbeat_gpa;
part->sn.uv.activate_gru_mq_desc_gpa =
- remote_rp->sn.activate_gru_mq_desc_gpa;
+ remote_rp->sn.uv.activate_gru_mq_desc_gpa;
/*
* ??? Is it a good idea to make this conditional on what is
@@ -913,8 +882,9 @@
*/
if (part->sn.uv.remote_act_state == XPC_P_AS_INACTIVE) {
msg.rp_gpa = uv_gpa(xpc_rsvd_page);
+ msg.heartbeat_gpa = xpc_rsvd_page->sn.uv.heartbeat_gpa;
msg.activate_gru_mq_desc_gpa =
- xpc_rsvd_page->sn.activate_gru_mq_desc_gpa;
+ xpc_rsvd_page->sn.uv.activate_gru_mq_desc_gpa;
xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV);
}
@@ -1010,7 +980,7 @@
* Setup the channel structures that are uv specific.
*/
static enum xp_retval
-xpc_setup_ch_structures_sn_uv(struct xpc_partition *part)
+xpc_setup_ch_structures_uv(struct xpc_partition *part)
{
struct xpc_channel_uv *ch_uv;
int ch_number;
@@ -1029,7 +999,7 @@
* Teardown the channel structures that are uv specific.
*/
static void
-xpc_teardown_ch_structures_sn_uv(struct xpc_partition *part)
+xpc_teardown_ch_structures_uv(struct xpc_partition *part)
{
/* nothing needs to be done */
return;
@@ -1243,6 +1213,16 @@
}
static void
+xpc_send_chctl_opencomplete_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+ struct xpc_activate_mq_msg_chctl_opencomplete_uv msg;
+
+ msg.ch_number = ch->number;
+ xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+ XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV);
+}
+
+static void
xpc_send_chctl_local_msgrequest_uv(struct xpc_partition *part, int ch_number)
{
unsigned long irq_flags;
@@ -1669,58 +1649,67 @@
msg->hdr.msg_slot_number += ch->remote_nentries;
}
+static struct xpc_arch_operations xpc_arch_ops_uv = {
+ .setup_partitions = xpc_setup_partitions_uv,
+ .teardown_partitions = xpc_teardown_partitions_uv,
+ .process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv,
+ .get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv,
+ .setup_rsvd_page = xpc_setup_rsvd_page_uv,
+
+ .allow_hb = xpc_allow_hb_uv,
+ .disallow_hb = xpc_disallow_hb_uv,
+ .disallow_all_hbs = xpc_disallow_all_hbs_uv,
+ .increment_heartbeat = xpc_increment_heartbeat_uv,
+ .offline_heartbeat = xpc_offline_heartbeat_uv,
+ .online_heartbeat = xpc_online_heartbeat_uv,
+ .heartbeat_init = xpc_heartbeat_init_uv,
+ .heartbeat_exit = xpc_heartbeat_exit_uv,
+ .get_remote_heartbeat = xpc_get_remote_heartbeat_uv,
+
+ .request_partition_activation =
+ xpc_request_partition_activation_uv,
+ .request_partition_reactivation =
+ xpc_request_partition_reactivation_uv,
+ .request_partition_deactivation =
+ xpc_request_partition_deactivation_uv,
+ .cancel_partition_deactivation_request =
+ xpc_cancel_partition_deactivation_request_uv,
+
+ .setup_ch_structures = xpc_setup_ch_structures_uv,
+ .teardown_ch_structures = xpc_teardown_ch_structures_uv,
+
+ .make_first_contact = xpc_make_first_contact_uv,
+
+ .get_chctl_all_flags = xpc_get_chctl_all_flags_uv,
+ .send_chctl_closerequest = xpc_send_chctl_closerequest_uv,
+ .send_chctl_closereply = xpc_send_chctl_closereply_uv,
+ .send_chctl_openrequest = xpc_send_chctl_openrequest_uv,
+ .send_chctl_openreply = xpc_send_chctl_openreply_uv,
+ .send_chctl_opencomplete = xpc_send_chctl_opencomplete_uv,
+ .process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv,
+
+ .save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv,
+
+ .setup_msg_structures = xpc_setup_msg_structures_uv,
+ .teardown_msg_structures = xpc_teardown_msg_structures_uv,
+
+ .indicate_partition_engaged = xpc_indicate_partition_engaged_uv,
+ .indicate_partition_disengaged = xpc_indicate_partition_disengaged_uv,
+ .assume_partition_disengaged = xpc_assume_partition_disengaged_uv,
+ .partition_engaged = xpc_partition_engaged_uv,
+ .any_partition_engaged = xpc_any_partition_engaged_uv,
+
+ .n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv,
+ .send_payload = xpc_send_payload_uv,
+ .get_deliverable_payload = xpc_get_deliverable_payload_uv,
+ .received_payload = xpc_received_payload_uv,
+ .notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv,
+};
+
int
xpc_init_uv(void)
{
- xpc_setup_partitions_sn = xpc_setup_partitions_sn_uv;
- xpc_teardown_partitions_sn = xpc_teardown_partitions_sn_uv;
- xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv;
- xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv;
- xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_uv;
- xpc_increment_heartbeat = xpc_increment_heartbeat_uv;
- xpc_offline_heartbeat = xpc_offline_heartbeat_uv;
- xpc_online_heartbeat = xpc_online_heartbeat_uv;
- xpc_heartbeat_init = xpc_heartbeat_init_uv;
- xpc_heartbeat_exit = xpc_heartbeat_exit_uv;
- xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_uv;
-
- xpc_request_partition_activation = xpc_request_partition_activation_uv;
- xpc_request_partition_reactivation =
- xpc_request_partition_reactivation_uv;
- xpc_request_partition_deactivation =
- xpc_request_partition_deactivation_uv;
- xpc_cancel_partition_deactivation_request =
- xpc_cancel_partition_deactivation_request_uv;
-
- xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_uv;
- xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_uv;
-
- xpc_make_first_contact = xpc_make_first_contact_uv;
-
- xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_uv;
- xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_uv;
- xpc_send_chctl_closereply = xpc_send_chctl_closereply_uv;
- xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_uv;
- xpc_send_chctl_openreply = xpc_send_chctl_openreply_uv;
-
- xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv;
-
- xpc_setup_msg_structures = xpc_setup_msg_structures_uv;
- xpc_teardown_msg_structures = xpc_teardown_msg_structures_uv;
-
- xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_uv;
- xpc_indicate_partition_disengaged =
- xpc_indicate_partition_disengaged_uv;
- xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_uv;
- xpc_partition_engaged = xpc_partition_engaged_uv;
- xpc_any_partition_engaged = xpc_any_partition_engaged_uv;
-
- xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv;
- xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv;
- xpc_send_payload = xpc_send_payload_uv;
- xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv;
- xpc_get_deliverable_payload = xpc_get_deliverable_payload_uv;
- xpc_received_payload = xpc_received_payload_uv;
+ xpc_arch_ops = xpc_arch_ops_uv;
if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) {
dev_err(xpc_part, "xpc_notify_mq_msghdr_uv is larger than %d\n",
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 4173677..b72b3d6 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -153,7 +153,7 @@
struct ep93xx_priv
{
struct resource *res;
- void *base_addr;
+ void __iomem *base_addr;
int irq;
struct ep93xx_descs *descs;
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index deb7b53..83a1212 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -2532,8 +2532,8 @@
* various kernel subsystems to support the mechanics required by a
* fixed-high-32-bit system.
*/
- if ((pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) ||
- (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) != 0)) {
+ if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) ||
+ (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)) {
dev_err(&pdev->dev, "No usable DMA configuration,aborting\n");
goto err_dma;
}
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 9b75aa6..30d0c81 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1821,11 +1821,11 @@
be_msix_enable(adapter);
- status = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+ status = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
if (!status) {
netdev->features |= NETIF_F_HIGHDMA;
} else {
- status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ status = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (status) {
dev_err(&pdev->dev, "Could not set PCI DMA Mask\n");
goto free_netdev;
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index ece3504..621a7c0 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -2591,13 +2591,13 @@
jme_pci_dma64(struct pci_dev *pdev)
{
if (pdev->device == PCI_DEVICE_ID_JMICRON_JMC250 &&
- !pci_set_dma_mask(pdev, DMA_64BIT_MASK))
- if (!pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
+ if (!pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
return 1;
if (pdev->device == PCI_DEVICE_ID_JMICRON_JMC250 &&
- !pci_set_dma_mask(pdev, DMA_40BIT_MASK))
- if (!pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK))
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(40)))
+ if (!pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40)))
return 1;
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
diff --git a/drivers/net/wireless/ath9k/pci.c b/drivers/net/wireless/ath9k/pci.c
index 6dbc585..168411d 100644
--- a/drivers/net/wireless/ath9k/pci.c
+++ b/drivers/net/wireless/ath9k/pci.c
@@ -93,14 +93,14 @@
if (pci_enable_device(pdev))
return -EIO;
- ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (ret) {
printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
goto bad;
}
- ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (ret) {
printk(KERN_ERR "ath9k: 32-bit DMA consistent "
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index e3569a0a..b1610ea 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -492,8 +492,8 @@
goto err_disable_dev;
}
- if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) ||
- pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) ||
+ pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
dev_err(&pdev->dev, "No suitable DMA available\n");
goto err_free_reg;
}
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index 4fa3bb2..33e5ade 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -434,7 +434,8 @@
0 /*base_hi*/,
PAR_IRQ,
PARPORT_DMA_NONE /* dma */,
- NULL /*struct pci_dev* */) )
+ NULL /*struct pci_dev* */),
+ 0 /* shared irq flags */ )
printk(KERN_WARNING PFX "Probing parallel port failed.\n");
#endif /* CONFIG_PARPORT_PC */
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index ffe34a1..4e9851f 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -573,7 +573,7 @@
config RTC_DRV_SH
tristate "SuperH On-Chip RTC"
- depends on RTC_CLASS && SUPERH
+ depends on RTC_CLASS && SUPERH && HAVE_CLK
help
Say Y here to enable support for the on-chip RTC found in
most SuperH processors.
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index b6d35f5..23e10b6 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -797,17 +797,15 @@
goto cleanup2;
}
- pr_info("%s: alarms up to one %s%s, %zd bytes nvram%s\n",
- dev_name(&cmos_rtc.rtc->dev),
- is_valid_irq(rtc_irq)
- ? (cmos_rtc.mon_alrm
- ? "year"
- : (cmos_rtc.day_alrm
- ? "month" : "day"))
- : "no",
- cmos_rtc.century ? ", y3k" : "",
- nvram.size,
- is_hpet_enabled() ? ", hpet irqs" : "");
+ pr_info("%s: %s%s, %zd bytes nvram%s\n",
+ dev_name(&cmos_rtc.rtc->dev),
+ !is_valid_irq(rtc_irq) ? "no alarms" :
+ cmos_rtc.mon_alrm ? "alarms up to one year" :
+ cmos_rtc.day_alrm ? "alarms up to one month" :
+ "alarms up to one day",
+ cmos_rtc.century ? ", y3k" : "",
+ nvram.size,
+ is_hpet_enabled() ? ", hpet irqs" : "");
return 0;
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index 9b1ff12..d7310ad 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -1,7 +1,7 @@
/*
* SuperH On-Chip RTC Support
*
- * Copyright (C) 2006, 2007, 2008 Paul Mundt
+ * Copyright (C) 2006 - 2009 Paul Mundt
* Copyright (C) 2006 Jamie Lenehan
* Copyright (C) 2008 Angelo Castello
*
@@ -25,10 +25,11 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/log2.h>
+#include <linux/clk.h>
#include <asm/rtc.h>
#define DRV_NAME "sh-rtc"
-#define DRV_VERSION "0.2.1"
+#define DRV_VERSION "0.2.2"
#define RTC_REG(r) ((r) * rtc_reg_size)
@@ -87,16 +88,17 @@
#define RCR2_START 0x01 /* Start bit */
struct sh_rtc {
- void __iomem *regbase;
- unsigned long regsize;
- struct resource *res;
- int alarm_irq;
- int periodic_irq;
- int carry_irq;
- struct rtc_device *rtc_dev;
- spinlock_t lock;
- unsigned long capabilities; /* See asm-sh/rtc.h for cap bits */
- unsigned short periodic_freq;
+ void __iomem *regbase;
+ unsigned long regsize;
+ struct resource *res;
+ int alarm_irq;
+ int periodic_irq;
+ int carry_irq;
+ struct clk *clk;
+ struct rtc_device *rtc_dev;
+ spinlock_t lock;
+ unsigned long capabilities; /* See asm/rtc.h for cap bits */
+ unsigned short periodic_freq;
};
static int __sh_rtc_interrupt(struct sh_rtc *rtc)
@@ -294,10 +296,10 @@
tmp = readb(rtc->regbase + RCR1);
- if (!enable)
- tmp &= ~RCR1_AIE;
- else
+ if (enable)
tmp |= RCR1_AIE;
+ else
+ tmp &= ~RCR1_AIE;
writeb(tmp, rtc->regbase + RCR1);
@@ -618,6 +620,7 @@
{
if (!is_power_of_2(freq))
return -EINVAL;
+
return sh_rtc_ioctl(dev, RTC_IRQP_SET, freq);
}
@@ -637,7 +640,8 @@
struct sh_rtc *rtc;
struct resource *res;
struct rtc_time r;
- int ret;
+ char clk_name[6];
+ int clk_id, ret;
rtc = kzalloc(sizeof(struct sh_rtc), GFP_KERNEL);
if (unlikely(!rtc))
@@ -652,6 +656,7 @@
dev_err(&pdev->dev, "No IRQ resource\n");
goto err_badres;
}
+
rtc->periodic_irq = ret;
rtc->carry_irq = platform_get_irq(pdev, 1);
rtc->alarm_irq = platform_get_irq(pdev, 2);
@@ -663,7 +668,7 @@
goto err_badres;
}
- rtc->regsize = res->end - res->start + 1;
+ rtc->regsize = resource_size(res);
rtc->res = request_mem_region(res->start, rtc->regsize, pdev->name);
if (unlikely(!rtc->res)) {
@@ -677,6 +682,26 @@
goto err_badmap;
}
+ clk_id = pdev->id;
+ /* With a single device, the clock id is still "rtc0" */
+ if (clk_id < 0)
+ clk_id = 0;
+
+ snprintf(clk_name, sizeof(clk_name), "rtc%d", clk_id);
+
+ rtc->clk = clk_get(&pdev->dev, clk_name);
+ if (IS_ERR(rtc->clk)) {
+ /*
+ * No error handling for rtc->clk intentionally, not all
+ * platforms will have a unique clock for the RTC, and
+ * the clk API can handle the struct clk pointer being
+ * NULL.
+ */
+ rtc->clk = NULL;
+ }
+
+ clk_enable(rtc->clk);
+
rtc->rtc_dev = rtc_device_register("sh", &pdev->dev,
&sh_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc->rtc_dev)) {
@@ -759,6 +784,8 @@
return 0;
err_unmap:
+ clk_disable(rtc->clk);
+ clk_put(rtc->clk);
iounmap(rtc->regbase);
err_badmap:
release_resource(rtc->res);
@@ -780,6 +807,7 @@
sh_rtc_setcie(&pdev->dev, 0);
free_irq(rtc->periodic_irq, rtc);
+
if (rtc->carry_irq > 0) {
free_irq(rtc->carry_irq, rtc);
free_irq(rtc->alarm_irq, rtc);
@@ -789,6 +817,9 @@
iounmap(rtc->regbase);
+ clk_disable(rtc->clk);
+ clk_put(rtc->clk);
+
platform_set_drvdata(pdev, NULL);
kfree(rtc);
@@ -802,11 +833,11 @@
struct sh_rtc *rtc = platform_get_drvdata(pdev);
set_irq_wake(rtc->periodic_irq, enabled);
+
if (rtc->carry_irq > 0) {
set_irq_wake(rtc->carry_irq, enabled);
set_irq_wake(rtc->alarm_irq, enabled);
}
-
}
static int sh_rtc_suspend(struct device *dev)
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 0570794c..d181527 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -20,6 +20,7 @@
#include <linux/slab.h>
#include <linux/buffer_head.h>
#include <linux/hdreg.h>
+#include <linux/async.h>
#include <asm/ccwdev.h>
#include <asm/ebcdic.h>
@@ -480,8 +481,10 @@
if (rc && rc != -EAGAIN)
device->target = device->state;
- if (device->state == device->target)
+ if (device->state == device->target) {
wake_up(&dasd_init_waitq);
+ dasd_put_device(device);
+ }
/* let user-space know that the device status changed */
kobject_uevent(&device->cdev->dev.kobj, KOBJ_CHANGE);
@@ -513,12 +516,15 @@
*/
void dasd_set_target_state(struct dasd_device *device, int target)
{
+ dasd_get_device(device);
/* If we are in probeonly mode stop at DASD_STATE_READY. */
if (dasd_probeonly && target > DASD_STATE_READY)
target = DASD_STATE_READY;
if (device->target != target) {
- if (device->state == target)
+ if (device->state == target) {
wake_up(&dasd_init_waitq);
+ dasd_put_device(device);
+ }
device->target = target;
}
if (device->state != device->target)
@@ -2148,6 +2154,22 @@
* SECTION: common functions for ccw_driver use
*/
+static void dasd_generic_auto_online(void *data, async_cookie_t cookie)
+{
+ struct ccw_device *cdev = data;
+ int ret;
+
+ ret = ccw_device_set_online(cdev);
+ if (ret)
+ pr_warning("%s: Setting the DASD online failed with rc=%d\n",
+ dev_name(&cdev->dev), ret);
+ else {
+ struct dasd_device *device = dasd_device_from_cdev(cdev);
+ wait_event(dasd_init_waitq, _wait_for_device(device));
+ dasd_put_device(device);
+ }
+}
+
/*
* Initial attempt at a probe function. this can be simplified once
* the other detection code is gone.
@@ -2180,10 +2202,7 @@
*/
if ((dasd_get_feature(cdev, DASD_FEATURE_INITIAL_ONLINE) > 0 ) ||
(dasd_autodetect && dasd_busid_known(dev_name(&cdev->dev)) != 0))
- ret = ccw_device_set_online(cdev);
- if (ret)
- pr_warning("%s: Setting the DASD online failed with rc=%d\n",
- dev_name(&cdev->dev), ret);
+ async_schedule(dasd_generic_auto_online, cdev);
return 0;
}
@@ -2290,13 +2309,7 @@
} else
pr_debug("dasd_generic device %s found\n",
dev_name(&cdev->dev));
-
- /* FIXME: we have to wait for the root device but we don't want
- * to wait for each single device but for all at once. */
- wait_event(dasd_init_waitq, _wait_for_device(device));
-
dasd_put_device(device);
-
return rc;
}
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 2125479..cb52da0 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -2019,15 +2019,23 @@
ccw++;
recid += count;
new_track = 0;
+ /* first idaw for a ccw may start anywhere */
+ if (!idaw_dst)
+ idaw_dst = dst;
}
- /* If we start a new idaw, everything is fine and the
- * start of the new idaw is the start of this segment.
+ /* If we start a new idaw, we must make sure that it
+ * starts on an IDA_BLOCK_SIZE boundary.
* If we continue an idaw, we must make sure that the
* current segment begins where the so far accumulated
* idaw ends
*/
- if (!idaw_dst)
- idaw_dst = dst;
+ if (!idaw_dst) {
+ if (__pa(dst) & (IDA_BLOCK_SIZE-1)) {
+ dasd_sfree_request(cqr, startdev);
+ return ERR_PTR(-ERANGE);
+ } else
+ idaw_dst = dst;
+ }
if ((idaw_dst + idaw_len) != dst) {
dasd_sfree_request(cqr, startdev);
return ERR_PTR(-ERANGE);
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 9e8a291..accd957 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -881,42 +881,6 @@
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
}
-static void qdio_call_shutdown(struct work_struct *work)
-{
- struct ccw_device_private *priv;
- struct ccw_device *cdev;
-
- priv = container_of(work, struct ccw_device_private, kick_work);
- cdev = priv->cdev;
- qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
- put_device(&cdev->dev);
-}
-
-static void qdio_int_error(struct ccw_device *cdev)
-{
- struct qdio_irq *irq_ptr = cdev->private->qdio_data;
-
- switch (irq_ptr->state) {
- case QDIO_IRQ_STATE_INACTIVE:
- case QDIO_IRQ_STATE_CLEANUP:
- qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
- break;
- case QDIO_IRQ_STATE_ESTABLISHED:
- case QDIO_IRQ_STATE_ACTIVE:
- qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
- if (get_device(&cdev->dev)) {
- /* Can't call shutdown from interrupt context. */
- PREPARE_WORK(&cdev->private->kick_work,
- qdio_call_shutdown);
- queue_work(ccw_device_work, &cdev->private->kick_work);
- }
- break;
- default:
- WARN_ON(1);
- }
- wake_up(&cdev->private->wait_q);
-}
-
static int qdio_establish_check_errors(struct ccw_device *cdev, int cstat,
int dstat)
{
@@ -973,10 +937,8 @@
switch (PTR_ERR(irb)) {
case -EIO:
DBF_ERROR("%4x IO error", irq_ptr->schid.sch_no);
- return;
- case -ETIMEDOUT:
- DBF_ERROR("%4x IO timeout", irq_ptr->schid.sch_no);
- qdio_int_error(cdev);
+ qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
+ wake_up(&cdev->private->wait_q);
return;
default:
WARN_ON(1);
@@ -1001,7 +963,6 @@
case QDIO_IRQ_STATE_ACTIVE:
if (cstat & SCHN_STAT_PCI) {
qdio_int_handler_pci(irq_ptr);
- /* no state change so no need to wake up wait_q */
return;
}
if ((cstat & ~SCHN_STAT_PCI) || dstat) {
diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c
index e6d1fc8..a85ad05 100644
--- a/drivers/sbus/char/jsflash.c
+++ b/drivers/sbus/char/jsflash.c
@@ -383,18 +383,22 @@
return 0;
}
-static int jsf_ioctl(struct inode *inode, struct file *f, unsigned int cmd,
- unsigned long arg)
+static long jsf_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
{
+ lock_kernel();
int error = -ENOTTY;
void __user *argp = (void __user *)arg;
- if (!capable(CAP_SYS_ADMIN))
+ if (!capable(CAP_SYS_ADMIN)) {
+ unlock_kernel();
return -EPERM;
+ }
switch (cmd) {
case JSFLASH_IDENT:
- if (copy_to_user(argp, &jsf0.id, JSFIDSZ))
+ if (copy_to_user(argp, &jsf0.id, JSFIDSZ)) {
+ unlock_kernel();
return -EFAULT;
+ }
break;
case JSFLASH_ERASE:
error = jsf_ioctl_erase(arg);
@@ -404,6 +408,7 @@
break;
}
+ unlock_kernel();
return error;
}
@@ -439,7 +444,7 @@
.llseek = jsf_lseek,
.read = jsf_read,
.write = jsf_write,
- .ioctl = jsf_ioctl,
+ .unlocked_ioctl = jsf_ioctl,
.mmap = jsf_mmap,
.open = jsf_open,
.release = jsf_release,
diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c
index 27993c3..2c56fd5 100644
--- a/drivers/sbus/char/uctrl.c
+++ b/drivers/sbus/char/uctrl.c
@@ -197,9 +197,8 @@
static void uctrl_get_event_status(struct uctrl_driver *);
static void uctrl_get_external_status(struct uctrl_driver *);
-static int
-uctrl_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long
+uctrl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
switch (cmd) {
default:
@@ -226,7 +225,7 @@
static const struct file_operations uctrl_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
- .ioctl = uctrl_ioctl,
+ .unlocked_ioctl = uctrl_ioctl,
.open = uctrl_open,
};
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index fdb14ec..8b7983a 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -2234,10 +2234,10 @@
pci_set_master(pdev);
pci_try_set_mwi(pdev);
- if (pci_set_dma_mask(pdev, DMA_64BIT_MASK)
- || pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
- if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)
- || pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
+ || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+ || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
TW_PRINTK(host, TW_DRIVER, 0x40, "Failed to set dma mask during resume");
retval = -ENODEV;
goto out_disable_device;
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 280261c..2a88985 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -1378,7 +1378,7 @@
if (dev->nondasd_support && !dev->in_reset)
printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id);
- if (dma_get_required_mask(&dev->pdev->dev) > DMA_32BIT_MASK)
+ if (dma_get_required_mask(&dev->pdev->dev) > DMA_BIT_MASK(32))
dev->needs_dac = 1;
dev->dac_support = 0;
if ((sizeof(dma_addr_t) > 4) && dev->needs_dac &&
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index b1bd3fc..36fd2e7 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1394,7 +1394,7 @@
*/
cmd->sense_buffer[8] = 0; /* Information */
cmd->sense_buffer[9] = 0xa; /* Add. length */
- do_div(bghm, cmd->device->sector_size);
+ bghm /= cmd->device->sector_size;
failing_sector = scsi_get_lba(cmd);
failing_sector += bghm;
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 52427a8..a91f514 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -855,9 +855,9 @@
if (sizeof(dma_addr_t) > 4) {
const uint64_t required_mask =
dma_get_required_mask(&pdev->dev);
- if ((required_mask > DMA_32BIT_MASK) && !pci_set_dma_mask(pdev,
- DMA_64BIT_MASK) && !pci_set_consistent_dma_mask(pdev,
- DMA_64BIT_MASK)) {
+ if ((required_mask > DMA_BIT_MASK(32)) && !pci_set_dma_mask(pdev,
+ DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(pdev,
+ DMA_BIT_MASK(64))) {
ioc->base_add_sg_single = &_base_add_sg_single_64;
ioc->sge_size = sizeof(Mpi2SGESimple64_t);
desc = "64";
@@ -865,8 +865,8 @@
}
}
- if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)
- && !pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+ && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
ioc->base_add_sg_single = &_base_add_sg_single_32;
ioc->sge_size = sizeof(Mpi2SGESimple32_t);
desc = "32";
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index a14d245..6f51ca4 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -180,8 +180,6 @@
spin_unlock(&async_scan_lock);
kfree(data);
- /* Synchronize async operations globally */
- async_synchronize_full();
return 0;
}
diff --git a/drivers/scsi/scsi_wait_scan.c b/drivers/scsi/scsi_wait_scan.c
index 2f21af2..74708fc 100644
--- a/drivers/scsi/scsi_wait_scan.c
+++ b/drivers/scsi/scsi_wait_scan.c
@@ -11,10 +11,21 @@
*/
#include <linux/module.h>
+#include <linux/device.h>
#include <scsi/scsi_scan.h>
static int __init wait_scan_init(void)
{
+ /*
+ * First we need to wait for device probing to finish;
+ * the drivers we just loaded might just still be probing
+ * and might not yet have reached the scsi async scanning
+ */
+ wait_for_device_probe();
+ /*
+ * and then we wait for the actual asynchronous scsi scan
+ * to finish.
+ */
scsi_complete_async_scans();
return 0;
}
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 18ba812..d86123e 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -166,7 +166,7 @@
struct tty_struct *tty = uart->port.info->port.tty;
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
+ if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
uart->scts = 0;
uart_handle_cts_change(&uart->port, uart->scts);
}
@@ -368,7 +368,7 @@
struct bfin_serial_port *uart = dev_id;
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
+ if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
uart->scts = 0;
uart_handle_cts_change(&uart->port, uart->scts);
}
@@ -504,7 +504,7 @@
struct circ_buf *xmit = &uart->port.info->xmit;
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
+ if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
uart->scts = 0;
uart_handle_cts_change(&uart->port, uart->scts);
}
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 41ac948..e06686a 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -127,7 +127,7 @@
struct s3c24xx_uart_port *ourport = to_ourport(port);
if (tx_enabled(port)) {
- disable_irq(ourport->tx_irq);
+ disable_irq_nosync(ourport->tx_irq);
tx_enabled(port) = 0;
if (port->flags & UPF_CONS_FLOW)
s3c24xx_serial_rx_enable(port);
@@ -154,7 +154,7 @@
if (rx_enabled(port)) {
dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
- disable_irq(ourport->rx_irq);
+ disable_irq_nosync(ourport->rx_irq);
rx_enabled(port) = 0;
}
}
diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c
index 7fb9b5c..12d13d9 100644
--- a/drivers/sh/intc.c
+++ b/drivers/sh/intc.c
@@ -44,6 +44,7 @@
struct intc_desc_int {
struct list_head list;
struct sys_device sysdev;
+ pm_message_t state;
unsigned long *reg;
#ifdef CONFIG_SMP
unsigned long *smp;
@@ -786,18 +787,44 @@
/* get intc controller associated with this sysdev */
d = container_of(dev, struct intc_desc_int, sysdev);
- /* enable wakeup irqs belonging to this intc controller */
- for_each_irq_desc(irq, desc) {
- if ((desc->status & IRQ_WAKEUP) && (desc->chip == &d->chip))
- intc_enable(irq);
+ switch (state.event) {
+ case PM_EVENT_ON:
+ if (d->state.event != PM_EVENT_FREEZE)
+ break;
+ for_each_irq_desc(irq, desc) {
+ if (desc->chip != &d->chip)
+ continue;
+ if (desc->status & IRQ_DISABLED)
+ intc_disable(irq);
+ else
+ intc_enable(irq);
+ }
+ break;
+ case PM_EVENT_FREEZE:
+ /* nothing has to be done */
+ break;
+ case PM_EVENT_SUSPEND:
+ /* enable wakeup irqs belonging to this intc controller */
+ for_each_irq_desc(irq, desc) {
+ if ((desc->status & IRQ_WAKEUP) && (desc->chip == &d->chip))
+ intc_enable(irq);
+ }
+ break;
}
+ d->state = state;
return 0;
}
+static int intc_resume(struct sys_device *dev)
+{
+ return intc_suspend(dev, PMSG_ON);
+}
+
static struct sysdev_class intc_sysdev_class = {
.name = "intc",
.suspend = intc_suspend,
+ .resume = intc_resume,
};
/* register this intc as sysdev to allow suspend/resume */
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index c1688c7..885194a 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -195,7 +195,7 @@
struct chip_data *chip = drv_data->cur_chip;
if (chip->cs_control) {
- chip->cs_control(PXA2XX_CS_ASSERT);
+ chip->cs_control(PXA2XX_CS_DEASSERT);
return;
}
@@ -213,7 +213,7 @@
while (read_SSSR(reg) & SSSR_RNE) {
read_SSDR(reg);
}
- } while ((read_SSSR(reg) & SSSR_BSY) && limit--);
+ } while ((read_SSSR(reg) & SSSR_BSY) && --limit);
write_SSSR(SSSR_ROR, reg);
return limit;
@@ -484,7 +484,7 @@
{
unsigned long limit = loops_per_jiffy << 1;
- while ((read_SSSR(ioaddr) & SSSR_BSY) && limit--)
+ while ((read_SSSR(ioaddr) & SSSR_BSY) && --limit)
cpu_relax();
return limit;
@@ -494,7 +494,7 @@
{
unsigned long limit = loops_per_jiffy << 1;
- while (!(DCSR(channel) & DCSR_STOPSTATE) && limit--)
+ while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit)
cpu_relax();
return limit;
@@ -1700,6 +1700,13 @@
struct ssp_device *ssp = drv_data->ssp;
int status = 0;
+ if (drv_data->rx_channel != -1)
+ DRCMR(drv_data->ssp->drcmr_rx) =
+ DRCMR_MAPVLD | drv_data->rx_channel;
+ if (drv_data->tx_channel != -1)
+ DRCMR(drv_data->ssp->drcmr_tx) =
+ DRCMR_MAPVLD | drv_data->tx_channel;
+
/* Enable the SSP clock */
clk_enable(ssp->clk);
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 643908b..8eba98c 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -658,7 +658,7 @@
int status;
struct spi_message message;
- struct spi_transfer x;
+ struct spi_transfer x[2];
u8 *local_buf;
/* Use preallocated DMA-safe buffer. We can't avoid copying here,
@@ -669,9 +669,15 @@
return -EINVAL;
spi_message_init(&message);
- memset(&x, 0, sizeof x);
- x.len = n_tx + n_rx;
- spi_message_add_tail(&x, &message);
+ memset(x, 0, sizeof x);
+ if (n_tx) {
+ x[0].len = n_tx;
+ spi_message_add_tail(&x[0], &message);
+ }
+ if (n_rx) {
+ x[1].len = n_rx;
+ spi_message_add_tail(&x[1], &message);
+ }
/* ... unless someone else is using the pre-allocated buffer */
if (!mutex_trylock(&lock)) {
@@ -682,15 +688,15 @@
local_buf = buf;
memcpy(local_buf, txbuf, n_tx);
- x.tx_buf = local_buf;
- x.rx_buf = local_buf;
+ x[0].tx_buf = local_buf;
+ x[1].rx_buf = local_buf + n_tx;
/* do the i/o */
status = spi_sync(spi, &message);
if (status == 0)
- memcpy(rxbuf, x.rx_buf + n_tx, n_rx);
+ memcpy(rxbuf, x[1].rx_buf, n_rx);
- if (x.tx_buf == buf)
+ if (x[0].tx_buf == buf)
mutex_unlock(&lock);
else
kfree(local_buf);
diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index 79e90fe..299d29d 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -41,6 +41,8 @@
static struct proc_dir_entry *binder_proc_dir_entry_root;
static struct proc_dir_entry *binder_proc_dir_entry_proc;
static struct hlist_head binder_dead_nodes;
+static HLIST_HEAD(binder_deferred_list);
+static DEFINE_MUTEX(binder_deferred_lock);
static int binder_read_proc_proc(
char *page, char **start, off_t off, int count, int *eof, void *data);
@@ -54,11 +56,7 @@
#define SZ_4M 0x400000
#endif
-#ifndef __i386__
-#define FORBIDDEN_MMAP_FLAGS (VM_WRITE | VM_EXEC)
-#else
#define FORBIDDEN_MMAP_FLAGS (VM_WRITE)
-#endif
#define BINDER_SMALL_BUF_SIZE (PAGE_SIZE * 64)
@@ -236,6 +234,12 @@
uint8_t data[0];
};
+enum {
+ BINDER_DEFERRED_PUT_FILES = 0x01,
+ BINDER_DEFERRED_FLUSH = 0x02,
+ BINDER_DEFERRED_RELEASE = 0x04,
+};
+
struct binder_proc {
struct hlist_node proc_node;
struct rb_root threads;
@@ -245,8 +249,11 @@
int pid;
struct vm_area_struct *vma;
struct task_struct *tsk;
+ struct files_struct *files;
+ struct hlist_node deferred_work_node;
+ int deferred_work;
void *buffer;
- size_t user_buffer_offset;
+ ptrdiff_t user_buffer_offset;
struct list_head buffers;
struct rb_root free_buffers;
@@ -310,12 +317,14 @@
uid_t sender_euid;
};
+static void binder_defer_work(struct binder_proc *proc, int defer);
+
/*
* copied from get_unused_fd_flags
*/
-int task_get_unused_fd_flags(struct task_struct *tsk, int flags)
+int task_get_unused_fd_flags(struct binder_proc *proc, int flags)
{
- struct files_struct *files = get_files_struct(tsk);
+ struct files_struct *files = proc->files;
int fd, error;
struct fdtable *fdt;
unsigned long rlim_cur;
@@ -337,9 +346,9 @@
* will limit the total number of files that can be opened.
*/
rlim_cur = 0;
- if (lock_task_sighand(tsk, &irqs)) {
- rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur;
- unlock_task_sighand(tsk, &irqs);
+ if (lock_task_sighand(proc->tsk, &irqs)) {
+ rlim_cur = proc->tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur;
+ unlock_task_sighand(proc->tsk, &irqs);
}
if (fd >= rlim_cur)
goto out;
@@ -375,7 +384,6 @@
out:
spin_unlock(&files->file_lock);
- put_files_struct(files);
return error;
}
@@ -383,9 +391,9 @@
* copied from fd_install
*/
static void task_fd_install(
- struct task_struct *tsk, unsigned int fd, struct file *file)
+ struct binder_proc *proc, unsigned int fd, struct file *file)
{
- struct files_struct *files = get_files_struct(tsk);
+ struct files_struct *files = proc->files;
struct fdtable *fdt;
if (files == NULL)
@@ -396,7 +404,6 @@
BUG_ON(fdt->fd[fd] != NULL);
rcu_assign_pointer(fdt->fd[fd], file);
spin_unlock(&files->file_lock);
- put_files_struct(files);
}
/*
@@ -413,10 +420,10 @@
/*
* copied from sys_close
*/
-static long task_close_fd(struct task_struct *tsk, unsigned int fd)
+static long task_close_fd(struct binder_proc *proc, unsigned int fd)
{
struct file *filp;
- struct files_struct *files = get_files_struct(tsk);
+ struct files_struct *files = proc->files;
struct fdtable *fdt;
int retval;
@@ -443,12 +450,10 @@
retval == -ERESTART_RESTARTBLOCK))
retval = -EINTR;
- put_files_struct(files);
return retval;
out_unlock:
spin_unlock(&files->file_lock);
- put_files_struct(files);
return -EBADF;
}
@@ -618,7 +623,8 @@
proc->pid, page_addr);
goto err_map_kernel_failed;
}
- user_page_addr = (size_t)page_addr + proc->user_buffer_offset;
+ user_page_addr =
+ (uintptr_t)page_addr + proc->user_buffer_offset;
ret = vm_insert_page(vma, user_page_addr, page[0]);
if (ret) {
printk(KERN_ERR "binder: %d: binder_alloc_buf failed "
@@ -639,7 +645,7 @@
page_addr -= PAGE_SIZE) {
page = &proc->pages[(page_addr - proc->buffer) / PAGE_SIZE];
if (vma)
- zap_page_range(vma, (size_t)page_addr +
+ zap_page_range(vma, (uintptr_t)page_addr +
proc->user_buffer_offset, PAGE_SIZE, NULL);
err_vm_insert_page_failed:
unmap_kernel_range((unsigned long)page_addr, PAGE_SIZE);
@@ -720,18 +726,19 @@
"er %p size %zd\n", proc->pid, size, buffer, buffer_size);
has_page_addr =
- (void *)(((size_t)buffer->data + buffer_size) & PAGE_MASK);
+ (void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK);
if (n == NULL) {
if (size + sizeof(struct binder_buffer) + 4 >= buffer_size)
buffer_size = size; /* no room for other buffers */
else
buffer_size = size + sizeof(struct binder_buffer);
}
- end_page_addr = (void *)PAGE_ALIGN((size_t)buffer->data + buffer_size);
+ end_page_addr =
+ (void *)PAGE_ALIGN((uintptr_t)buffer->data + buffer_size);
if (end_page_addr > has_page_addr)
end_page_addr = has_page_addr;
if (binder_update_page_range(proc, 1,
- (void *)PAGE_ALIGN((size_t)buffer->data), end_page_addr, NULL))
+ (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr, NULL))
return NULL;
rb_erase(best_fit, &proc->free_buffers);
@@ -762,12 +769,12 @@
static void *buffer_start_page(struct binder_buffer *buffer)
{
- return (void *)((size_t)buffer & PAGE_MASK);
+ return (void *)((uintptr_t)buffer & PAGE_MASK);
}
static void *buffer_end_page(struct binder_buffer *buffer)
{
- return (void *)(((size_t)(buffer + 1) - 1) & PAGE_MASK);
+ return (void *)(((uintptr_t)(buffer + 1) - 1) & PAGE_MASK);
}
static void binder_delete_free_buffer(
@@ -845,8 +852,8 @@
}
binder_update_page_range(proc, 0,
- (void *)PAGE_ALIGN((size_t)buffer->data),
- (void *)(((size_t)buffer->data + buffer_size) & PAGE_MASK),
+ (void *)PAGE_ALIGN((uintptr_t)buffer->data),
+ (void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK),
NULL);
rb_erase(&buffer->rb_node, &proc->allocated_buffers);
buffer->free = 1;
@@ -1345,6 +1352,17 @@
if (!(tr->flags & TF_ONE_WAY) && thread->transaction_stack) {
struct binder_transaction *tmp;
tmp = thread->transaction_stack;
+ if (tmp->to_thread != thread) {
+ binder_user_error("binder: %d:%d got new "
+ "transaction with bad transaction stack"
+ ", transaction %d has target %d:%d\n",
+ proc->pid, thread->pid, tmp->debug_id,
+ tmp->to_proc ? tmp->to_proc->pid : 0,
+ tmp->to_thread ?
+ tmp->to_thread->pid : 0);
+ return_error = BR_FAILED_REPLY;
+ goto err_bad_call_stack;
+ }
while (tmp) {
if (tmp->from && tmp->from->proc == target_proc)
target_thread = tmp->from;
@@ -1434,10 +1452,19 @@
return_error = BR_FAILED_REPLY;
goto err_copy_data_failed;
}
+ if (!IS_ALIGNED(tr->offsets_size, sizeof(size_t))) {
+ binder_user_error("binder: %d:%d got transaction with "
+ "invalid offsets size, %zd\n",
+ proc->pid, thread->pid, tr->offsets_size);
+ return_error = BR_FAILED_REPLY;
+ goto err_bad_offset;
+ }
off_end = (void *)offp + tr->offsets_size;
for (; offp < off_end; offp++) {
struct flat_binder_object *fp;
- if (*offp > t->buffer->data_size - sizeof(*fp)) {
+ if (*offp > t->buffer->data_size - sizeof(*fp) ||
+ t->buffer->data_size < sizeof(*fp) ||
+ !IS_ALIGNED(*offp, sizeof(void *))) {
binder_user_error("binder: %d:%d got transaction with "
"invalid offset, %zd\n",
proc->pid, thread->pid, *offp);
@@ -1544,13 +1571,13 @@
return_error = BR_FAILED_REPLY;
goto err_fget_failed;
}
- target_fd = task_get_unused_fd_flags(target_proc->tsk, O_CLOEXEC);
+ target_fd = task_get_unused_fd_flags(target_proc, O_CLOEXEC);
if (target_fd < 0) {
fput(file);
return_error = BR_FAILED_REPLY;
goto err_get_unused_fd_failed;
}
- task_fd_install(target_proc->tsk, target_fd, file);
+ task_fd_install(target_proc, target_fd, file);
if (binder_debug_mask & BINDER_DEBUG_TRANSACTION)
printk(KERN_INFO " fd %ld -> %d\n", fp->handle, target_fd);
/* TODO: fput? */
@@ -1655,7 +1682,9 @@
off_end = (void *)offp + buffer->offsets_size;
for (; offp < off_end; offp++) {
struct flat_binder_object *fp;
- if (*offp > buffer->data_size - sizeof(*fp)) {
+ if (*offp > buffer->data_size - sizeof(*fp) ||
+ buffer->data_size < sizeof(*fp) ||
+ !IS_ALIGNED(*offp, sizeof(void *))) {
printk(KERN_ERR "binder: transaction release %d bad"
"offset %zd, size %zd\n", debug_id, *offp, buffer->data_size);
continue;
@@ -1691,7 +1720,7 @@
if (binder_debug_mask & BINDER_DEBUG_TRANSACTION)
printk(KERN_INFO " fd %ld\n", fp->handle);
if (failed_at)
- task_close_fd(proc->tsk, fp->handle);
+ task_close_fd(proc, fp->handle);
break;
default:
@@ -2340,7 +2369,7 @@
tr.data_size = t->buffer->data_size;
tr.offsets_size = t->buffer->offsets_size;
- tr.data.ptr.buffer = (void *)((void *)t->buffer->data + proc->user_buffer_offset);
+ tr.data.ptr.buffer = (void *)t->buffer->data + proc->user_buffer_offset;
tr.data.ptr.offsets = tr.data.ptr.buffer + ALIGN(t->buffer->data_size, sizeof(void *));
if (put_user(cmd, (uint32_t __user *)ptr))
@@ -2656,6 +2685,7 @@
(unsigned long)pgprot_val(vma->vm_page_prot));
dump_stack();
}
+
static void binder_vma_close(struct vm_area_struct *vma)
{
struct binder_proc *proc = vma->vm_private_data;
@@ -2666,6 +2696,7 @@
(vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags,
(unsigned long)pgprot_val(vma->vm_page_prot));
proc->vma = NULL;
+ binder_defer_work(proc, BINDER_DEFERRED_PUT_FILES);
}
static struct vm_operations_struct binder_vm_ops = {
@@ -2698,6 +2729,12 @@
}
vma->vm_flags = (vma->vm_flags | VM_DONTCOPY) & ~VM_MAYWRITE;
+ if (proc->buffer) {
+ ret = -EBUSY;
+ failure_string = "already mapped";
+ goto err_already_mapped;
+ }
+
area = get_vm_area(vma->vm_end - vma->vm_start, VM_IOREMAP);
if (area == NULL) {
ret = -ENOMEM;
@@ -2705,7 +2742,7 @@
goto err_get_vm_area_failed;
}
proc->buffer = area->addr;
- proc->user_buffer_offset = vma->vm_start - (size_t)proc->buffer;
+ proc->user_buffer_offset = vma->vm_start - (uintptr_t)proc->buffer;
#ifdef CONFIG_CPU_CACHE_VIPT
if (cache_is_vipt_aliasing()) {
@@ -2738,6 +2775,7 @@
binder_insert_free_buffer(proc, buffer);
proc->free_async_space = proc->buffer_size / 2;
barrier();
+ proc->files = get_files_struct(current);
proc->vma = vma;
/*printk(KERN_INFO "binder_mmap: %d %lx-%lx maps %p\n", proc->pid, vma->vm_start, vma->vm_end, proc->buffer);*/
@@ -2745,10 +2783,12 @@
err_alloc_small_buf_failed:
kfree(proc->pages);
+ proc->pages = NULL;
err_alloc_pages_failed:
vfree(proc->buffer);
+ proc->buffer = NULL;
err_get_vm_area_failed:
- mutex_unlock(&binder_lock);
+err_already_mapped:
err_bad_arg:
printk(KERN_ERR "binder_mmap: %d %lx-%lx %s failed %d\n", proc->pid, vma->vm_start, vma->vm_end, failure_string, ret);
return ret;
@@ -2780,6 +2820,7 @@
if (binder_proc_dir_entry_proc) {
char strbuf[11];
snprintf(strbuf, sizeof(strbuf), "%u", proc->pid);
+ remove_proc_entry(strbuf, binder_proc_dir_entry_proc);
create_proc_read_entry(strbuf, S_IRUGO, binder_proc_dir_entry_proc, binder_read_proc_proc, proc);
}
@@ -2788,11 +2829,17 @@
static int binder_flush(struct file *filp, fl_owner_t id)
{
- struct rb_node *n;
struct binder_proc *proc = filp->private_data;
- int wake_count = 0;
- mutex_lock(&binder_lock);
+ binder_defer_work(proc, BINDER_DEFERRED_FLUSH);
+
+ return 0;
+}
+
+static void binder_deferred_flush(struct binder_proc *proc)
+{
+ struct rb_node *n;
+ int wake_count = 0;
for (n = rb_first(&proc->threads); n != NULL; n = rb_next(n)) {
struct binder_thread *thread = rb_entry(n, struct binder_thread, rb_node);
thread->looper |= BINDER_LOOPER_STATE_NEED_RETURN;
@@ -2802,28 +2849,35 @@
}
}
wake_up_interruptible_all(&proc->wait);
- mutex_unlock(&binder_lock);
if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
printk(KERN_INFO "binder_flush: %d woke %d threads\n", proc->pid, wake_count);
-
- return 0;
}
static int binder_release(struct inode *nodp, struct file *filp)
{
- struct hlist_node *pos;
- struct binder_transaction *t;
- struct rb_node *n;
struct binder_proc *proc = filp->private_data;
- int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count;
-
if (binder_proc_dir_entry_proc) {
char strbuf[11];
snprintf(strbuf, sizeof(strbuf), "%u", proc->pid);
remove_proc_entry(strbuf, binder_proc_dir_entry_proc);
}
- mutex_lock(&binder_lock);
+
+ binder_defer_work(proc, BINDER_DEFERRED_RELEASE);
+
+ return 0;
+}
+
+static void binder_deferred_release(struct binder_proc *proc)
+{
+ struct hlist_node *pos;
+ struct binder_transaction *t;
+ struct rb_node *n;
+ int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count;
+
+ BUG_ON(proc->vma);
+ BUG_ON(proc->files);
+
hlist_del(&proc->proc_node);
if (binder_context_mgr_node && binder_context_mgr_node->proc == proc) {
if (binder_debug_mask & BINDER_DEBUG_DEAD_BINDER)
@@ -2897,7 +2951,6 @@
}
binder_stats.obj_deleted[BINDER_STAT_PROC]++;
- mutex_unlock(&binder_lock);
page_count = 0;
if (proc->pages) {
@@ -2921,7 +2974,57 @@
proc->pid, threads, nodes, incoming_refs, outgoing_refs, active_transactions, buffers, page_count);
kfree(proc);
- return 0;
+}
+
+static void binder_deferred_func(struct work_struct *work)
+{
+ struct binder_proc *proc;
+ struct files_struct *files;
+
+ int defer;
+ do {
+ mutex_lock(&binder_lock);
+ mutex_lock(&binder_deferred_lock);
+ if (!hlist_empty(&binder_deferred_list)) {
+ proc = hlist_entry(binder_deferred_list.first,
+ struct binder_proc, deferred_work_node);
+ hlist_del_init(&proc->deferred_work_node);
+ defer = proc->deferred_work;
+ proc->deferred_work = 0;
+ } else {
+ proc = NULL;
+ defer = 0;
+ }
+ mutex_unlock(&binder_deferred_lock);
+
+ files = NULL;
+ if (defer & BINDER_DEFERRED_PUT_FILES)
+ if ((files = proc->files))
+ proc->files = NULL;
+
+ if (defer & BINDER_DEFERRED_FLUSH)
+ binder_deferred_flush(proc);
+
+ if (defer & BINDER_DEFERRED_RELEASE)
+ binder_deferred_release(proc); /* frees proc */
+
+ mutex_unlock(&binder_lock);
+ if (files)
+ put_files_struct(files);
+ } while (proc);
+}
+static DECLARE_WORK(binder_deferred_work, binder_deferred_func);
+
+static void binder_defer_work(struct binder_proc *proc, int defer)
+{
+ mutex_lock(&binder_deferred_lock);
+ proc->deferred_work |= defer;
+ if (hlist_unhashed(&proc->deferred_work_node)) {
+ hlist_add_head(&proc->deferred_work_node,
+ &binder_deferred_list);
+ schedule_work(&binder_deferred_work);
+ }
+ mutex_unlock(&binder_deferred_lock);
}
static char *print_binder_transaction(char *buf, char *end, const char *prefix, struct binder_transaction *t)
diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c
index 6f6e36a..c8af9a8 100644
--- a/drivers/staging/at76_usb/at76_usb.c
+++ b/drivers/staging/at76_usb/at76_usb.c
@@ -5259,6 +5259,18 @@
return 0;
}
+static const struct net_device_ops at76_netdev_ops = {
+ .ndo_open = at76_open,
+ .ndo_stop = at76_stop,
+ .ndo_get_stats = at76_get_stats,
+ .ndo_start_xmit = at76_tx,
+ .ndo_tx_timeout = at76_tx_timeout,
+ .ndo_set_multicast_list = at76_set_multicast,
+ .ndo_set_mac_address = at76_set_mac_address,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
/* Register network device and initialize the hardware */
static int at76_init_new_device(struct at76_priv *priv,
struct usb_interface *interface)
@@ -5303,21 +5315,15 @@
priv->scan_mode = SCAN_TYPE_ACTIVE;
netdev->flags &= ~IFF_MULTICAST; /* not yet or never */
- netdev->open = at76_open;
- netdev->stop = at76_stop;
- netdev->get_stats = at76_get_stats;
+ netdev->netdev_ops = &at76_netdev_ops;
netdev->ethtool_ops = &at76_ethtool_ops;
/* Add pointers to enable iwspy support. */
priv->wireless_data.spy_data = &priv->spy_data;
netdev->wireless_data = &priv->wireless_data;
- netdev->hard_start_xmit = at76_tx;
- netdev->tx_timeout = at76_tx_timeout;
netdev->watchdog_timeo = 2 * HZ;
netdev->wireless_handlers = &at76_handler_def;
- netdev->set_multicast_list = at76_set_multicast;
- netdev->set_mac_address = at76_set_mac_address;
dev_alloc_name(netdev, "wlan%d");
ret = register_netdev(priv->netdev);
diff --git a/drivers/staging/b3dfg/b3dfg.c b/drivers/staging/b3dfg/b3dfg.c
index 0348072..75ebe33 100644
--- a/drivers/staging/b3dfg/b3dfg.c
+++ b/drivers/staging/b3dfg/b3dfg.c
@@ -1000,7 +1000,7 @@
pci_set_master(pdev);
- r = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ r = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (r) {
dev_err(&pdev->dev, "no usable DMA configuration\n");
goto err_free_res;
diff --git a/drivers/staging/epl/VirtualEthernetLinux.c b/drivers/staging/epl/VirtualEthernetLinux.c
index 21206c4..077724a 100644
--- a/drivers/staging/epl/VirtualEthernetLinux.c
+++ b/drivers/staging/epl/VirtualEthernetLinux.c
@@ -284,6 +284,17 @@
return Ret;
}
+static const struct net_device_ops epl_netdev_ops = {
+ .ndo_open = VEthOpen,
+ .ndo_stop = VEthClose,
+ .ndo_get_stats = VEthGetStats,
+ .ndo_start_xmit = VEthXmit,
+ .ndo_tx_timeout = VEthTimeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
tEplKernel VEthAddInstance(tEplDllkInitParam *pInitParam_p)
{
tEplKernel Ret = kEplSuccessful;
@@ -299,11 +310,7 @@
goto Exit;
}
- pVEthNetDevice_g->open = VEthOpen;
- pVEthNetDevice_g->stop = VEthClose;
- pVEthNetDevice_g->get_stats = VEthGetStats;
- pVEthNetDevice_g->hard_start_xmit = VEthXmit;
- pVEthNetDevice_g->tx_timeout = VEthTimeout;
+ pVEthNetDevice_g->netdev_ops = &epl_netdev_ops;
pVEthNetDevice_g->watchdog_timeo = EPL_VETH_TX_TIMEOUT;
pVEthNetDevice_g->destructor = free_netdev;
diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c
index de65972..951c73d 100644
--- a/drivers/staging/et131x/et131x_netdev.c
+++ b/drivers/staging/et131x/et131x_netdev.c
@@ -112,6 +112,19 @@
void et131x_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
void et131x_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
+static const struct net_device_ops et131x_netdev_ops = {
+ .ndo_open = et131x_open,
+ .ndo_stop = et131x_close,
+ .ndo_start_xmit = et131x_tx,
+ .ndo_set_multicast_list = et131x_multicast,
+ .ndo_tx_timeout = et131x_tx_timeout,
+ .ndo_change_mtu = et131x_change_mtu,
+ .ndo_set_mac_address = et131x_set_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_get_stats = et131x_stats,
+ .ndo_do_ioctl = et131x_ioctl,
+};
+
/**
* et131x_device_alloc
*
@@ -142,16 +155,8 @@
*/
//netdev->init = &et131x_init;
//netdev->set_config = &et131x_config;
- netdev->get_stats = &et131x_stats;
- netdev->open = &et131x_open;
- netdev->stop = &et131x_close;
- netdev->do_ioctl = &et131x_ioctl;
- netdev->set_multicast_list = &et131x_multicast;
- netdev->hard_start_xmit = &et131x_tx;
- netdev->tx_timeout = &et131x_tx_timeout;
netdev->watchdog_timeo = ET131X_TX_TIMEOUT;
- netdev->change_mtu = &et131x_change_mtu;
- netdev->set_mac_address = &et131x_set_mac_addr;
+ netdev->netdev_ops = &et131x_netdev_ops;
//netdev->ethtool_ops = &et131x_ethtool_ops;
diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/go7007/go7007-driver.c
index 58bfc8d..77b1e76 100644
--- a/drivers/staging/go7007/go7007-driver.c
+++ b/drivers/staging/go7007/go7007-driver.c
@@ -191,8 +191,10 @@
/*
* Attempt to instantiate an I2C client by ID, probably loading a module.
*/
-static int init_i2c_module(struct i2c_adapter *adapter, int id, int addr)
+static int init_i2c_module(struct i2c_adapter *adapter, const char *type,
+ int id, int addr)
{
+ struct i2c_board_info info;
char *modname;
switch (id) {
@@ -226,7 +228,11 @@
}
if (modname != NULL)
request_module(modname);
- if (wis_i2c_probe_device(adapter, id, addr) == 1)
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = addr;
+ strlcpy(info.type, type, I2C_NAME_SIZE);
+ if (!i2c_new_device(adapter, &info))
return 0;
if (modname != NULL)
printk(KERN_INFO
@@ -266,23 +272,9 @@
if (go->i2c_adapter_online) {
for (i = 0; i < go->board_info->num_i2c_devs; ++i)
init_i2c_module(&go->i2c_adapter,
+ go->board_info->i2c_devs[i].type,
go->board_info->i2c_devs[i].id,
go->board_info->i2c_devs[i].addr);
-#ifdef TUNER_SET_TYPE_ADDR
- if (go->tuner_type >= 0) {
- struct tuner_setup tun_setup = {
- .mode_mask = T_ANALOG_TV,
- .addr = ADDR_UNSET,
- .type = go->tuner_type
- };
- i2c_clients_command(&go->i2c_adapter,
- TUNER_SET_TYPE_ADDR, &tun_setup);
- }
-#else
- if (go->tuner_type >= 0)
- i2c_clients_command(&go->i2c_adapter,
- TUNER_SET_TYPE, &go->tuner_type);
-#endif
if (go->board_id == GO7007_BOARDID_ADLINK_MPG24)
i2c_clients_command(&go->i2c_adapter,
DECODER_SET_CHANNEL, &go->channel_number);
diff --git a/drivers/staging/go7007/go7007-i2c.c b/drivers/staging/go7007/go7007-i2c.c
index cd55b76..c82867f 100644
--- a/drivers/staging/go7007/go7007-i2c.c
+++ b/drivers/staging/go7007/go7007-i2c.c
@@ -31,87 +31,6 @@
#include "go7007-priv.h"
#include "wis-i2c.h"
-/************** Registration interface for I2C client drivers **************/
-
-/* Since there's no way to auto-probe the I2C devices connected to the I2C
- * bus on the go7007, we have this silly little registration system that
- * client drivers can use to register their I2C driver ID and their
- * detect_client function (the one that's normally passed to i2c_probe).
- *
- * When a new go7007 device is connected, we can look up in a board info
- * table by the USB or PCI vendor/product/revision ID to determine
- * which I2C client module to load. The client driver module will register
- * itself here, and then we can call the registered detect_client function
- * to force-load a new client at the address listed in the board info table.
- *
- * Really the I2C subsystem should have a way to force-load I2C client
- * drivers when we have a priori knowledge of what's on the bus, especially
- * since the existing I2C auto-probe mechanism is so hokey, but we'll use
- * our own mechanism for the time being. */
-
-struct wis_i2c_client_driver {
- unsigned int id;
- found_proc found_proc;
- struct list_head list;
-};
-
-static LIST_HEAD(i2c_client_drivers);
-static DECLARE_MUTEX(i2c_client_driver_list_lock);
-
-/* Client drivers register here by their I2C driver ID */
-int wis_i2c_add_driver(unsigned int id, found_proc found_proc)
-{
- struct wis_i2c_client_driver *driver;
-
- driver = kmalloc(sizeof(struct wis_i2c_client_driver), GFP_KERNEL);
- if (driver == NULL)
- return -ENOMEM;
- driver->id = id;
- driver->found_proc = found_proc;
-
- down(&i2c_client_driver_list_lock);
- list_add_tail(&driver->list, &i2c_client_drivers);
- up(&i2c_client_driver_list_lock);
-
- return 0;
-}
-EXPORT_SYMBOL(wis_i2c_add_driver);
-
-void wis_i2c_del_driver(found_proc found_proc)
-{
- struct wis_i2c_client_driver *driver, *next;
-
- down(&i2c_client_driver_list_lock);
- list_for_each_entry_safe(driver, next, &i2c_client_drivers, list)
- if (driver->found_proc == found_proc) {
- list_del(&driver->list);
- kfree(driver);
- }
- up(&i2c_client_driver_list_lock);
-}
-EXPORT_SYMBOL(wis_i2c_del_driver);
-
-/* The main go7007 driver calls this to instantiate a client by driver
- * ID and bus address, which are both stored in the board info table */
-int wis_i2c_probe_device(struct i2c_adapter *adapter,
- unsigned int id, int addr)
-{
- struct wis_i2c_client_driver *driver;
- int found = 0;
-
- if (addr < 0 || addr > 0x7f)
- return -1;
- down(&i2c_client_driver_list_lock);
- list_for_each_entry(driver, &i2c_client_drivers, list)
- if (driver->id == id) {
- if (driver->found_proc(adapter, addr, 0) == 0)
- found = 1;
- break;
- }
- up(&i2c_client_driver_list_lock);
- return found;
-}
-
/********************* Driver for on-board I2C adapter *********************/
/* #define GO7007_I2C_DEBUG */
@@ -287,9 +206,7 @@
static struct i2c_adapter go7007_adap_templ = {
.owner = THIS_MODULE,
- .class = I2C_CLASS_TV_ANALOG,
.name = "WIS GO7007SB",
- .id = I2C_ALGO_GO7007,
.algo = &go7007_algo,
};
diff --git a/drivers/staging/go7007/go7007-priv.h b/drivers/staging/go7007/go7007-priv.h
index 372f1f1..178d181 100644
--- a/drivers/staging/go7007/go7007-priv.h
+++ b/drivers/staging/go7007/go7007-priv.h
@@ -87,6 +87,7 @@
int audio_main_div;
int num_i2c_devs;
struct {
+ const char *type;
int id;
int addr;
} i2c_devs[4];
diff --git a/drivers/staging/go7007/go7007-usb.c b/drivers/staging/go7007/go7007-usb.c
index 83eec92..aa4a9e0 100644
--- a/drivers/staging/go7007/go7007-usb.c
+++ b/drivers/staging/go7007/go7007-usb.c
@@ -91,6 +91,7 @@
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_saa7115",
.id = I2C_DRIVERID_WIS_SAA7115,
.addr = 0x20,
},
@@ -127,6 +128,7 @@
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_saa7113",
.id = I2C_DRIVERID_WIS_SAA7113,
.addr = 0x25,
},
@@ -164,6 +166,7 @@
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_saa7115",
.id = I2C_DRIVERID_WIS_SAA7115,
.addr = 0x20,
},
@@ -209,14 +212,17 @@
.num_i2c_devs = 3,
.i2c_devs = {
{
+ .type = "wis_saa7115",
.id = I2C_DRIVERID_WIS_SAA7115,
.addr = 0x20,
},
{
+ .type = "wis_uda1342",
.id = I2C_DRIVERID_WIS_UDA1342,
.addr = 0x1a,
},
{
+ .type = "wis_sony_tuner",
.id = I2C_DRIVERID_WIS_SONY_TUNER,
.addr = 0x60,
},
@@ -264,6 +270,7 @@
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_ov7640",
.id = I2C_DRIVERID_WIS_OV7640,
.addr = 0x21,
},
@@ -296,6 +303,7 @@
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_tw9903",
.id = I2C_DRIVERID_WIS_TW9903,
.addr = 0x44,
},
@@ -385,6 +393,7 @@
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_twTW2804",
.id = I2C_DRIVERID_WIS_TW2804,
.addr = 0x00, /* yes, really */
},
@@ -415,8 +424,9 @@
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "s2250_board",
.id = I2C_DRIVERID_S2250,
- .addr = 0x34,
+ .addr = 0x43,
},
},
.num_inputs = 2,
@@ -943,9 +953,7 @@
static struct i2c_adapter go7007_usb_adap_templ = {
.owner = THIS_MODULE,
- .class = I2C_CLASS_TV_ANALOG,
.name = "WIS GO7007SB EZ-USB",
- .id = I2C_ALGO_GO7007_USB,
.algo = &go7007_usb_algo,
};
diff --git a/drivers/staging/go7007/s2250-board.c b/drivers/staging/go7007/s2250-board.c
index d333ea2..1706fbf 100644
--- a/drivers/staging/go7007/s2250-board.c
+++ b/drivers/staging/go7007/s2250-board.c
@@ -28,7 +28,6 @@
extern void s2250loader_cleanup(void);
#define TLV320_ADDRESS 0x34
-#define S2250_VIDDEC 0x86
#define VPX322_ADDR_ANALOGCONTROL1 0x02
#define VPX322_ADDR_BRIGHTNESS0 0x0127
#define VPX322_ADDR_BRIGHTNESS1 0x0131
@@ -123,6 +122,7 @@
int hue;
int reg12b_val;
int audio_input;
+ struct i2c_client *audio;
};
/* from go7007-usb.c which is Copyright (C) 2005-2006 Micronas USA Inc.*/
@@ -452,16 +452,15 @@
{
struct v4l2_audio *audio = arg;
- client->addr = TLV320_ADDRESS;
switch (audio->index) {
case 0:
- write_reg(client, 0x08, 0x02); /* Line In */
+ write_reg(dec->audio, 0x08, 0x02); /* Line In */
break;
case 1:
- write_reg(client, 0x08, 0x04); /* Mic */
+ write_reg(dec->audio, 0x08, 0x04); /* Mic */
break;
case 2:
- write_reg(client, 0x08, 0x05); /* Mic Boost */
+ write_reg(dec->audio, 0x08, 0x05); /* Mic Boost */
break;
default:
return -EINVAL;
@@ -477,31 +476,23 @@
return 0;
}
-static struct i2c_driver s2250_driver;
-
-static struct i2c_client s2250_client_templ = {
- .name = "Sensoray 2250",
- .driver = &s2250_driver,
-};
-
-static int s2250_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int s2250_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_client *audio;
+ struct i2c_adapter *adapter = client->adapter;
struct s2250 *dec;
u8 *data;
struct go7007 *go = i2c_get_adapdata(adapter);
struct go7007_usb *usb = go->hpi_context;
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
+ audio = i2c_new_dummy(adapter, TLV320_ADDRESS >> 1);
+ if (audio == NULL)
return -ENOMEM;
- memcpy(client, &s2250_client_templ,
- sizeof(s2250_client_templ));
- client->adapter = adapter;
dec = kmalloc(sizeof(struct s2250), GFP_KERNEL);
if (dec == NULL) {
- kfree(client);
+ i2c_unregister_device(audio);
return -ENOMEM;
}
@@ -510,7 +501,7 @@
dec->contrast = 50;
dec->saturation = 50;
dec->hue = 0;
- client->addr = TLV320_ADDRESS;
+ dec->audio = audio;
i2c_set_clientdata(client, dec);
printk(KERN_DEBUG
@@ -518,28 +509,25 @@
adapter->name);
/* initialize the audio */
- client->addr = TLV320_ADDRESS;
- if (write_regs(client, aud_regs) < 0) {
+ if (write_regs(audio, aud_regs) < 0) {
printk(KERN_ERR
"s2250: error initializing audio\n");
- kfree(client);
+ i2c_unregister_device(audio);
kfree(dec);
return 0;
}
- client->addr = S2250_VIDDEC;
- i2c_set_clientdata(client, dec);
if (write_regs(client, vid_regs) < 0) {
printk(KERN_ERR
"s2250: error initializing decoder\n");
- kfree(client);
+ i2c_unregister_device(audio);
kfree(dec);
return 0;
}
if (write_regs_fp(client, vid_regs_fp) < 0) {
printk(KERN_ERR
"s2250: error initializing decoder\n");
- kfree(client);
+ i2c_unregister_device(audio);
kfree(dec);
return 0;
}
@@ -575,32 +563,33 @@
up(&usb->i2c_lock);
}
- i2c_attach_client(client);
printk("s2250: initialized successfully\n");
return 0;
}
-static int s2250_detach(struct i2c_client *client)
+static int s2250_remove(struct i2c_client *client)
{
struct s2250 *dec = i2c_get_clientdata(client);
- int r;
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
-
- kfree(client);
+ i2c_set_clientdata(client, NULL);
+ i2c_unregister_device(dec->audio);
kfree(dec);
return 0;
}
+static struct i2c_device_id s2250_id[] = {
+ { "s2250_board", 0 },
+ { }
+};
+
static struct i2c_driver s2250_driver = {
.driver = {
.name = "Sensoray 2250 board driver",
},
- .id = I2C_DRIVERID_S2250,
- .detach_client = s2250_detach,
+ .probe = s2250_probe,
+ .remove = s2250_remove,
.command = s2250_command,
+ .id_table = s2250_id,
};
static int __init s2250_init(void)
@@ -613,13 +602,13 @@
r = i2c_add_driver(&s2250_driver);
if (r < 0)
- return r;
- return wis_i2c_add_driver(s2250_driver.id, s2250_detect);
+ s2250loader_cleanup();
+
+ return r;
}
static void __exit s2250_cleanup(void)
{
- wis_i2c_del_driver(s2250_detect);
i2c_del_driver(&s2250_driver);
s2250loader_cleanup();
diff --git a/drivers/staging/go7007/wis-i2c.h b/drivers/staging/go7007/wis-i2c.h
index 431f41d..3c2b9be 100644
--- a/drivers/staging/go7007/wis-i2c.h
+++ b/drivers/staging/go7007/wis-i2c.h
@@ -24,21 +24,12 @@
#define I2C_DRIVERID_WIS_OV7640 0xf0f5
#define I2C_DRIVERID_WIS_TW2804 0xf0f6
#define I2C_DRIVERID_S2250 0xf0f7
-#define I2C_ALGO_GO7007 0xf00000
-#define I2C_ALGO_GO7007_USB 0xf10000
/* Flag to indicate that the client needs to be accessed with SCCB semantics */
/* We re-use the I2C_M_TEN value so the flag passes through the masks in the
* core I2C code. Major kludge, but the I2C layer ain't exactly flexible. */
#define I2C_CLIENT_SCCB 0x10
-typedef int (*found_proc) (struct i2c_adapter *, int, int);
-int wis_i2c_add_driver(unsigned int id, found_proc found_proc);
-void wis_i2c_del_driver(found_proc found_proc);
-
-int wis_i2c_probe_device(struct i2c_adapter *adapter,
- unsigned int id, int addr);
-
/* Definitions for new video decoder commands */
struct video_decoder_resolution {
diff --git a/drivers/staging/go7007/wis-ov7640.c b/drivers/staging/go7007/wis-ov7640.c
index 2f9efca..04d6d3a 100644
--- a/drivers/staging/go7007/wis-ov7640.c
+++ b/drivers/staging/go7007/wis-ov7640.c
@@ -50,76 +50,54 @@
return 0;
}
-static struct i2c_driver wis_ov7640_driver;
-
-static struct i2c_client wis_ov7640_client_templ = {
- .name = "OV7640 (WIS)",
- .driver = &wis_ov7640_driver,
-};
-
-static int wis_ov7640_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_ov7640_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
+ return -ENODEV;
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_ov7640_client_templ,
- sizeof(wis_ov7640_client_templ));
- client->adapter = adapter;
- client->addr = addr;
client->flags = I2C_CLIENT_SCCB;
printk(KERN_DEBUG
"wis-ov7640: initializing OV7640 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
if (write_regs(client, initial_registers) < 0) {
printk(KERN_ERR "wis-ov7640: error initializing OV7640\n");
- kfree(client);
- return 0;
+ return -ENODEV;
}
- i2c_attach_client(client);
return 0;
}
-static int wis_ov7640_detach(struct i2c_client *client)
+static int wis_ov7640_remove(struct i2c_client *client)
{
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
-
- kfree(client);
return 0;
}
+static struct i2c_device_id wis_ov7640_id[] = {
+ { "wis_ov7640", 0 },
+ { }
+};
+
static struct i2c_driver wis_ov7640_driver = {
.driver = {
.name = "WIS OV7640 I2C driver",
},
- .id = I2C_DRIVERID_WIS_OV7640,
- .detach_client = wis_ov7640_detach,
+ .probe = wis_ov7640_probe,
+ .remove = wis_ov7640_remove,
+ .id_table = wis_ov7640_id,
};
static int __init wis_ov7640_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_ov7640_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_ov7640_driver.id, wis_ov7640_detect);
+ return i2c_add_driver(&wis_ov7640_driver);
}
static void __exit wis_ov7640_cleanup(void)
{
- wis_i2c_del_driver(wis_ov7640_detect);
i2c_del_driver(&wis_ov7640_driver);
}
diff --git a/drivers/staging/go7007/wis-saa7113.c b/drivers/staging/go7007/wis-saa7113.c
index 1168972..9ab893b 100644
--- a/drivers/staging/go7007/wis-saa7113.c
+++ b/drivers/staging/go7007/wis-saa7113.c
@@ -261,34 +261,19 @@
return 0;
}
-static struct i2c_driver wis_saa7113_driver;
-
-static struct i2c_client wis_saa7113_client_templ = {
- .name = "SAA7113 (WIS)",
- .driver = &wis_saa7113_driver,
-};
-
-static int wis_saa7113_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_saa7113_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct wis_saa7113 *dec;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_saa7113_client_templ,
- sizeof(wis_saa7113_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
dec = kmalloc(sizeof(struct wis_saa7113), GFP_KERNEL);
- if (dec == NULL) {
- kfree(client);
+ if (dec == NULL)
return -ENOMEM;
- }
+
dec->norm = V4L2_STD_NTSC;
dec->brightness = 128;
dec->contrast = 71;
@@ -298,56 +283,49 @@
printk(KERN_DEBUG
"wis-saa7113: initializing SAA7113 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
if (write_regs(client, initial_registers) < 0) {
printk(KERN_ERR
"wis-saa7113: error initializing SAA7113\n");
- kfree(client);
kfree(dec);
- return 0;
+ return -ENODEV;
}
- i2c_attach_client(client);
return 0;
}
-static int wis_saa7113_detach(struct i2c_client *client)
+static int wis_saa7113_remove(struct i2c_client *client)
{
struct wis_saa7113 *dec = i2c_get_clientdata(client);
- int r;
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
-
- kfree(client);
+ i2c_set_clientdata(client, NULL);
kfree(dec);
return 0;
}
+static struct i2c_device_id wis_saa7113_id[] = {
+ { "wis_saa7113", 0 },
+ { }
+};
+
static struct i2c_driver wis_saa7113_driver = {
.driver = {
.name = "WIS SAA7113 I2C driver",
},
- .id = I2C_DRIVERID_WIS_SAA7113,
- .detach_client = wis_saa7113_detach,
+ .probe = wis_saa7113_probe,
+ .remove = wis_saa7113_remove,
.command = wis_saa7113_command,
+ .id_table = wis_saa7113_id,
};
static int __init wis_saa7113_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_saa7113_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_saa7113_driver.id, wis_saa7113_detect);
+ return i2c_add_driver(&wis_saa7113_driver);
}
static void __exit wis_saa7113_cleanup(void)
{
- wis_i2c_del_driver(wis_saa7113_detect);
i2c_del_driver(&wis_saa7113_driver);
}
diff --git a/drivers/staging/go7007/wis-saa7115.c b/drivers/staging/go7007/wis-saa7115.c
index 59417a7..8687ad2 100644
--- a/drivers/staging/go7007/wis-saa7115.c
+++ b/drivers/staging/go7007/wis-saa7115.c
@@ -394,34 +394,19 @@
return 0;
}
-static struct i2c_driver wis_saa7115_driver;
-
-static struct i2c_client wis_saa7115_client_templ = {
- .name = "SAA7115 (WIS)",
- .driver = &wis_saa7115_driver,
-};
-
-static int wis_saa7115_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_saa7115_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct wis_saa7115 *dec;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_saa7115_client_templ,
- sizeof(wis_saa7115_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
dec = kmalloc(sizeof(struct wis_saa7115), GFP_KERNEL);
- if (dec == NULL) {
- kfree(client);
+ if (dec == NULL)
return -ENOMEM;
- }
+
dec->norm = V4L2_STD_NTSC;
dec->brightness = 128;
dec->contrast = 64;
@@ -431,56 +416,49 @@
printk(KERN_DEBUG
"wis-saa7115: initializing SAA7115 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
if (write_regs(client, initial_registers) < 0) {
printk(KERN_ERR
"wis-saa7115: error initializing SAA7115\n");
- kfree(client);
kfree(dec);
- return 0;
+ return -ENODEV;
}
- i2c_attach_client(client);
return 0;
}
-static int wis_saa7115_detach(struct i2c_client *client)
+static int wis_saa7115_remove(struct i2c_client *client)
{
struct wis_saa7115 *dec = i2c_get_clientdata(client);
- int r;
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
-
- kfree(client);
+ i2c_set_clientdata(client, NULL);
kfree(dec);
return 0;
}
+static struct i2c_device_id wis_saa7115_id[] = {
+ { "wis_saa7115", 0 },
+ { }
+};
+
static struct i2c_driver wis_saa7115_driver = {
.driver = {
.name = "WIS SAA7115 I2C driver",
},
- .id = I2C_DRIVERID_WIS_SAA7115,
- .detach_client = wis_saa7115_detach,
+ .probe = wis_saa7115_probe,
+ .remove = wis_saa7115_remove,
.command = wis_saa7115_command,
+ .id_table = wis_saa7115_id,
};
static int __init wis_saa7115_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_saa7115_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_saa7115_driver.id, wis_saa7115_detect);
+ return i2c_add_driver(&wis_saa7115_driver);
}
static void __exit wis_saa7115_cleanup(void)
{
- wis_i2c_del_driver(wis_saa7115_detect);
i2c_del_driver(&wis_saa7115_driver);
}
diff --git a/drivers/staging/go7007/wis-sony-tuner.c b/drivers/staging/go7007/wis-sony-tuner.c
index 58fddb1..c965c60 100644
--- a/drivers/staging/go7007/wis-sony-tuner.c
+++ b/drivers/staging/go7007/wis-sony-tuner.c
@@ -386,6 +386,7 @@
struct wis_sony_tuner *t = i2c_get_clientdata(client);
switch (cmd) {
+#if 0
#ifdef TUNER_SET_TYPE_ADDR
case TUNER_SET_TYPE_ADDR:
{
@@ -463,6 +464,7 @@
t->type, sony_tuners[t->type - 200].name);
break;
}
+#endif
case VIDIOC_G_FREQUENCY:
{
struct v4l2_frequency *f = arg;
@@ -651,35 +653,19 @@
return 0;
}
-static struct i2c_driver wis_sony_tuner_driver;
-
-static struct i2c_client wis_sony_tuner_client_templ = {
- .name = "Sony TV Tuner (WIS)",
- .driver = &wis_sony_tuner_driver,
-};
-
-static int wis_sony_tuner_detect(struct i2c_adapter *adapter,
- int addr, int kind)
+static int wis_sony_tuner_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct wis_sony_tuner *t;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_sony_tuner_client_templ,
- sizeof(wis_sony_tuner_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
t = kmalloc(sizeof(struct wis_sony_tuner), GFP_KERNEL);
- if (t == NULL) {
- kfree(client);
+ if (t == NULL)
return -ENOMEM;
- }
+
t->type = -1;
t->freq = 0;
t->mpxmode = 0;
@@ -688,50 +674,42 @@
printk(KERN_DEBUG
"wis-sony-tuner: initializing tuner at address %d on %s\n",
- addr, adapter->name);
-
- i2c_attach_client(client);
+ client->addr, adapter->name);
return 0;
}
-static int wis_sony_tuner_detach(struct i2c_client *client)
+static int wis_sony_tuner_remove(struct i2c_client *client)
{
struct wis_sony_tuner *t = i2c_get_clientdata(client);
- int r;
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
-
+ i2c_set_clientdata(client, NULL);
kfree(t);
- kfree(client);
return 0;
}
+static struct i2c_device_id wis_sony_tuner_id[] = {
+ { "wis_sony_tuner", 0 },
+ { }
+};
+
static struct i2c_driver wis_sony_tuner_driver = {
.driver = {
.name = "WIS Sony TV Tuner I2C driver",
},
- .id = I2C_DRIVERID_WIS_SONY_TUNER,
- .detach_client = wis_sony_tuner_detach,
+ .probe = wis_sony_tuner_probe,
+ .remove = wis_sony_tuner_remove,
.command = tuner_command,
+ .id_table = wis_sony_tuner_id,
};
static int __init wis_sony_tuner_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_sony_tuner_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_sony_tuner_driver.id,
- wis_sony_tuner_detect);
+ return i2c_add_driver(&wis_sony_tuner_driver);
}
static void __exit wis_sony_tuner_cleanup(void)
{
- wis_i2c_del_driver(wis_sony_tuner_detect);
i2c_del_driver(&wis_sony_tuner_driver);
}
diff --git a/drivers/staging/go7007/wis-tw2804.c b/drivers/staging/go7007/wis-tw2804.c
index 57b8f2b..e15794a 100644
--- a/drivers/staging/go7007/wis-tw2804.c
+++ b/drivers/staging/go7007/wis-tw2804.c
@@ -291,34 +291,19 @@
return 0;
}
-static struct i2c_driver wis_tw2804_driver;
-
-static struct i2c_client wis_tw2804_client_templ = {
- .name = "TW2804 (WIS)",
- .driver = &wis_tw2804_driver,
-};
-
-static int wis_tw2804_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_tw2804_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct wis_tw2804 *dec;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_tw2804_client_templ,
- sizeof(wis_tw2804_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
dec = kmalloc(sizeof(struct wis_tw2804), GFP_KERNEL);
- if (dec == NULL) {
- kfree(client);
+ if (dec == NULL)
return -ENOMEM;
- }
+
dec->channel = -1;
dec->norm = V4L2_STD_NTSC;
dec->brightness = 128;
@@ -328,48 +313,42 @@
i2c_set_clientdata(client, dec);
printk(KERN_DEBUG "wis-tw2804: creating TW2804 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
- i2c_attach_client(client);
return 0;
}
-static int wis_tw2804_detach(struct i2c_client *client)
+static int wis_tw2804_remove(struct i2c_client *client)
{
struct wis_tw2804 *dec = i2c_get_clientdata(client);
- int r;
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
-
- kfree(client);
+ i2c_set_clientdata(client, NULL);
kfree(dec);
return 0;
}
+static struct i2c_device_id wis_tw2804_id[] = {
+ { "wis_tw2804", 0 },
+ { }
+};
+
static struct i2c_driver wis_tw2804_driver = {
.driver = {
.name = "WIS TW2804 I2C driver",
},
- .id = I2C_DRIVERID_WIS_TW2804,
- .detach_client = wis_tw2804_detach,
+ .probe = wis_tw2804_probe,
+ .remove = wis_tw2804_remove,
.command = wis_tw2804_command,
+ .id_table = wis_tw2804_id,
};
static int __init wis_tw2804_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_tw2804_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_tw2804_driver.id, wis_tw2804_detect);
+ return i2c_add_driver(&wis_tw2804_driver);
}
static void __exit wis_tw2804_cleanup(void)
{
- wis_i2c_del_driver(wis_tw2804_detect);
i2c_del_driver(&wis_tw2804_driver);
}
diff --git a/drivers/staging/go7007/wis-tw9903.c b/drivers/staging/go7007/wis-tw9903.c
index 40627b2..6c3427b 100644
--- a/drivers/staging/go7007/wis-tw9903.c
+++ b/drivers/staging/go7007/wis-tw9903.c
@@ -267,34 +267,19 @@
return 0;
}
-static struct i2c_driver wis_tw9903_driver;
-
-static struct i2c_client wis_tw9903_client_templ = {
- .name = "TW9903 (WIS)",
- .driver = &wis_tw9903_driver,
-};
-
-static int wis_tw9903_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_tw9903_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct wis_tw9903 *dec;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_tw9903_client_templ,
- sizeof(wis_tw9903_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
dec = kmalloc(sizeof(struct wis_tw9903), GFP_KERNEL);
- if (dec == NULL) {
- kfree(client);
+ if (dec == NULL)
return -ENOMEM;
- }
+
dec->norm = V4L2_STD_NTSC;
dec->brightness = 0;
dec->contrast = 0x60;
@@ -303,55 +288,48 @@
printk(KERN_DEBUG
"wis-tw9903: initializing TW9903 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
if (write_regs(client, initial_registers) < 0) {
printk(KERN_ERR "wis-tw9903: error initializing TW9903\n");
- kfree(client);
kfree(dec);
- return 0;
+ return -ENODEV;
}
- i2c_attach_client(client);
return 0;
}
-static int wis_tw9903_detach(struct i2c_client *client)
+static int wis_tw9903_remove(struct i2c_client *client)
{
struct wis_tw9903 *dec = i2c_get_clientdata(client);
- int r;
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
-
- kfree(client);
+ i2c_set_clientdata(client, NULL);
kfree(dec);
return 0;
}
+static struct i2c_device_id wis_tw9903_id[] = {
+ { "wis_tw9903", 0 },
+ { }
+};
+
static struct i2c_driver wis_tw9903_driver = {
.driver = {
.name = "WIS TW9903 I2C driver",
},
- .id = I2C_DRIVERID_WIS_TW9903,
- .detach_client = wis_tw9903_detach,
+ .probe = wis_tw9903_probe,
+ .remove = wis_tw9903_remove,
.command = wis_tw9903_command,
+ .id_table = wis_tw9903_id,
};
static int __init wis_tw9903_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_tw9903_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_tw9903_driver.id, wis_tw9903_detect);
+ return i2c_add_driver(&wis_tw9903_driver);
}
static void __exit wis_tw9903_cleanup(void)
{
- wis_i2c_del_driver(wis_tw9903_detect);
i2c_del_driver(&wis_tw9903_driver);
}
diff --git a/drivers/staging/go7007/wis-uda1342.c b/drivers/staging/go7007/wis-uda1342.c
index 555645c..739c7ae 100644
--- a/drivers/staging/go7007/wis-uda1342.c
+++ b/drivers/staging/go7007/wis-uda1342.c
@@ -59,73 +59,51 @@
return 0;
}
-static struct i2c_driver wis_uda1342_driver;
-
-static struct i2c_client wis_uda1342_client_templ = {
- .name = "UDA1342 (WIS)",
- .driver = &wis_uda1342_driver,
-};
-
-static int wis_uda1342_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_uda1342_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_uda1342_client_templ,
- sizeof(wis_uda1342_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
printk(KERN_DEBUG
"wis-uda1342: initializing UDA1342 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
write_reg(client, 0x00, 0x8000); /* reset registers */
write_reg(client, 0x00, 0x1241); /* select input 1 */
- i2c_attach_client(client);
return 0;
}
-static int wis_uda1342_detach(struct i2c_client *client)
+static int wis_uda1342_remove(struct i2c_client *client)
{
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
-
- kfree(client);
return 0;
}
+static struct i2c_device_id wis_uda1342_id[] = {
+ { "wis_uda1342", 0 },
+ { }
+};
+
static struct i2c_driver wis_uda1342_driver = {
.driver = {
.name = "WIS UDA1342 I2C driver",
},
- .id = I2C_DRIVERID_WIS_UDA1342,
- .detach_client = wis_uda1342_detach,
+ .probe = wis_uda1342_probe,
+ .remove = wis_uda1342_remove,
.command = wis_uda1342_command,
+ .id_table = wis_uda1342_id,
};
static int __init wis_uda1342_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_uda1342_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_uda1342_driver.id, wis_uda1342_detect);
+ return i2c_add_driver(&wis_uda1342_driver);
}
static void __exit wis_uda1342_cleanup(void)
{
- wis_i2c_del_driver(wis_uda1342_detect);
i2c_del_driver(&wis_uda1342_driver);
}
diff --git a/drivers/staging/line6/audio.c b/drivers/staging/line6/audio.c
index 3aa9468..e2ac8d6 100644
--- a/drivers/staging/line6/audio.c
+++ b/drivers/staging/line6/audio.c
@@ -27,11 +27,12 @@
{
static int dev;
struct snd_card *card;
+ int err;
- card = snd_card_new(line6_index[dev], line6_id[dev], THIS_MODULE, 0);
-
- if (card == NULL)
- return -ENOMEM;
+ err = snd_card_create(line6_index[dev], line6_id[dev], THIS_MODULE, 0,
+ &card);
+ if (err < 0)
+ return err;
line6->card = card;
diff --git a/drivers/staging/otus/usbdrv.c b/drivers/staging/otus/usbdrv.c
index 565a839..540cbbb 100644
--- a/drivers/staging/otus/usbdrv.c
+++ b/drivers/staging/otus/usbdrv.c
@@ -822,6 +822,21 @@
return 0;
}
+static const struct net_device_ops vap_netdev_ops = {
+ .ndo_open = zfLnxVapOpen,
+ .ndo_stop = zfLnxVapClose,
+ .ndo_start_xmit = zfLnxVapXmitFrame,
+ .ndo_get_stats = usbdrv_get_stats,
+ .ndo_change_mtu = usbdrv_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+#ifdef ZM_HOSTAPD_SUPPORT
+ .ndo_do_ioctl = usbdrv_ioctl,
+#else
+ .ndo_do_ioctl = NULL,
+#endif
+};
+
int zfLnxRegisterVapDev(struct net_device* parentDev, u16_t vapId)
{
/* Allocate net device structure */
@@ -846,16 +861,7 @@
vap[vapId].dev->ml_priv = parentDev->ml_priv;
//dev->hard_start_xmit = &zd1212_wds_xmit_frame;
- vap[vapId].dev->hard_start_xmit = &zfLnxVapXmitFrame;
- vap[vapId].dev->open = &zfLnxVapOpen;
- vap[vapId].dev->stop = &zfLnxVapClose;
- vap[vapId].dev->get_stats = &usbdrv_get_stats;
- vap[vapId].dev->change_mtu = &usbdrv_change_mtu;
-#ifdef ZM_HOSTAPD_SUPPORT
- vap[vapId].dev->do_ioctl = usbdrv_ioctl;
-#else
- vap[vapId].dev->do_ioctl = NULL;
-#endif
+ vap[vapId].dev->netdev_ops = &vap_netdev_ops;
vap[vapId].dev->destructor = free_netdev;
vap[vapId].dev->tx_queue_len = 0;
@@ -1068,6 +1074,18 @@
usb_unlink_urb(macp->RegInUrb);
}
+static const struct net_device_ops otus_netdev_ops = {
+ .ndo_open = usbdrv_open,
+ .ndo_stop = usbdrv_close,
+ .ndo_start_xmit = usbdrv_xmit_frame,
+ .ndo_change_mtu = usbdrv_change_mtu,
+ .ndo_get_stats = usbdrv_get_stats,
+ .ndo_set_multicast_list = usbdrv_set_multi,
+ .ndo_set_mac_address = usbdrv_set_mac,
+ .ndo_do_ioctl = usbdrv_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
u8_t zfLnxInitSetup(struct net_device *dev, struct usbdrv_private *macp)
{
//unsigned char addr[6];
@@ -1092,14 +1110,7 @@
dev->wireless_handlers = (struct iw_handler_def *)&p80211wext_handler_def;
#endif
- dev->open = usbdrv_open;
- dev->hard_start_xmit = usbdrv_xmit_frame;
- dev->stop = usbdrv_close;
- dev->change_mtu = &usbdrv_change_mtu;
- dev->get_stats = usbdrv_get_stats;
- dev->set_multicast_list = usbdrv_set_multi;
- dev->set_mac_address = usbdrv_set_mac;
- dev->do_ioctl = usbdrv_ioctl;
+ dev->netdev_ops = &otus_netdev_ops;
dev->flags |= IFF_MULTICAST;
diff --git a/drivers/staging/otus/zdusb.c b/drivers/staging/otus/zdusb.c
index 78f1d22..2a6d937 100644
--- a/drivers/staging/otus/zdusb.c
+++ b/drivers/staging/otus/zdusb.c
@@ -48,7 +48,8 @@
static struct usb_device_id zd1221_ids [] = {
{ USB_DEVICE(VENDOR_ATHR, PRODUCT_AR9170) },
{ USB_DEVICE(VENDOR_DLINK, PRODUCT_DWA160A) },
- { USB_DEVICE(0x0846, 0x9010) },
+ { USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WNDA3100) },
+ { USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WN111v2) },
{ } /* Terminating entry */
};
diff --git a/drivers/staging/otus/zdusb.h b/drivers/staging/otus/zdusb.h
index 656dc21..9f8ab2e 100644
--- a/drivers/staging/otus/zdusb.h
+++ b/drivers/staging/otus/zdusb.h
@@ -40,4 +40,8 @@
#define VENDOR_DLINK 0x07D1 //Dlink
#define PRODUCT_DWA160A 0x3C10
+#define VENDOR_NETGEAR 0x0846 /* NetGear */
+#define PRODUCT_WNDA3100 0x9010
+#define PRODUCT_WN111v2 0x9001
+
#endif
diff --git a/drivers/staging/pohmelfs/config.c b/drivers/staging/pohmelfs/config.c
index 3e67da9..a6eaa42 100644
--- a/drivers/staging/pohmelfs/config.c
+++ b/drivers/staging/pohmelfs/config.c
@@ -81,6 +81,45 @@
return g;
}
+static inline void pohmelfs_insert_config_entry(struct pohmelfs_sb *psb, struct pohmelfs_config *dst)
+{
+ struct pohmelfs_config *tmp;
+
+ INIT_LIST_HEAD(&dst->config_entry);
+
+ list_for_each_entry(tmp, &psb->state_list, config_entry) {
+ if (dst->state.ctl.prio > tmp->state.ctl.prio)
+ list_add_tail(&dst->config_entry, &tmp->config_entry);
+ }
+ if (list_empty(&dst->config_entry))
+ list_add_tail(&dst->config_entry, &psb->state_list);
+}
+
+static int pohmelfs_move_config_entry(struct pohmelfs_sb *psb,
+ struct pohmelfs_config *dst, struct pohmelfs_config *new)
+{
+ if ((dst->state.ctl.prio == new->state.ctl.prio) &&
+ (dst->state.ctl.perm == new->state.ctl.perm))
+ return 0;
+
+ dprintk("%s: dst: prio: %d, perm: %x, new: prio: %d, perm: %d.\n",
+ __func__, dst->state.ctl.prio, dst->state.ctl.perm,
+ new->state.ctl.prio, new->state.ctl.perm);
+ dst->state.ctl.prio = new->state.ctl.prio;
+ dst->state.ctl.perm = new->state.ctl.perm;
+
+ list_del_init(&dst->config_entry);
+ pohmelfs_insert_config_entry(psb, dst);
+ return 0;
+}
+
+/*
+ * pohmelfs_copy_config() is used to copy new state configs from the
+ * config group (controlled by the netlink messages) into the superblock.
+ * This happens either at startup time where no transactions can access
+ * the list of the configs (and thus list of the network states), or at
+ * run-time, where it is protected by the psb->state_lock.
+ */
int pohmelfs_copy_config(struct pohmelfs_sb *psb)
{
struct pohmelfs_config_group *g;
@@ -103,7 +142,9 @@
err = 0;
list_for_each_entry(dst, &psb->state_list, config_entry) {
if (pohmelfs_config_eql(&dst->state.ctl, &c->state.ctl)) {
- err = -EEXIST;
+ err = pohmelfs_move_config_entry(psb, dst, c);
+ if (!err)
+ err = -EEXIST;
break;
}
}
@@ -119,7 +160,7 @@
memcpy(&dst->state.ctl, &c->state.ctl, sizeof(struct pohmelfs_ctl));
- list_add_tail(&dst->config_entry, &psb->state_list);
+ pohmelfs_insert_config_entry(psb, dst);
err = pohmelfs_state_init_one(psb, dst);
if (err) {
@@ -248,6 +289,13 @@
return err;
}
+static int pohmelfs_modify_config(struct pohmelfs_ctl *old, struct pohmelfs_ctl *new)
+{
+ old->perm = new->perm;
+ old->prio = new->prio;
+ return 0;
+}
+
static int pohmelfs_cn_ctl(struct cn_msg *msg, int action)
{
struct pohmelfs_config_group *g;
@@ -278,6 +326,9 @@
g->num_entry--;
kfree(c);
goto out_unlock;
+ } else if (action == POHMELFS_FLAGS_MODIFY) {
+ err = pohmelfs_modify_config(sc, ctl);
+ goto out_unlock;
} else {
err = -EEXIST;
goto out_unlock;
@@ -296,6 +347,7 @@
}
memcpy(&c->state.ctl, ctl, sizeof(struct pohmelfs_ctl));
g->num_entry++;
+
list_add_tail(&c->config_entry, &g->config_list);
out_unlock:
@@ -401,10 +453,9 @@
switch (msg->flags) {
case POHMELFS_FLAGS_ADD:
- err = pohmelfs_cn_ctl(msg, POHMELFS_FLAGS_ADD);
- break;
case POHMELFS_FLAGS_DEL:
- err = pohmelfs_cn_ctl(msg, POHMELFS_FLAGS_DEL);
+ case POHMELFS_FLAGS_MODIFY:
+ err = pohmelfs_cn_ctl(msg, msg->flags);
break;
case POHMELFS_FLAGS_SHOW:
err = pohmelfs_cn_disp(msg);
diff --git a/drivers/staging/pohmelfs/dir.c b/drivers/staging/pohmelfs/dir.c
index 7a41183..b579984 100644
--- a/drivers/staging/pohmelfs/dir.c
+++ b/drivers/staging/pohmelfs/dir.c
@@ -328,7 +328,7 @@
{
struct inode *inode = &pi->vfs_inode;
struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
- long ret = msecs_to_jiffies(25000);
+ long ret = psb->wait_on_page_timeout;
int err;
dprintk("%s: dir: %llu, state: %lx: remote_synced: %d.\n",
@@ -389,11 +389,11 @@
dprintk("%s: parent: %llu, fpos: %llu, hash: %08lx.\n",
__func__, pi->ino, (u64)file->f_pos,
(unsigned long)file->private_data);
-
+#if 0
err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK);
if (err)
return err;
-
+#endif
err = pohmelfs_sync_remote_dir(pi);
if (err)
return err;
@@ -513,10 +513,6 @@
need_lock = pohmelfs_need_lock(parent, lock_type);
- err = pohmelfs_data_lock(parent, 0, ~0, lock_type);
- if (err)
- goto out;
-
str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0);
mutex_lock(&parent->offset_lock);
@@ -525,8 +521,8 @@
ino = n->ino;
mutex_unlock(&parent->offset_lock);
- dprintk("%s: 1 ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx.\n",
- __func__, ino, inode, str.name, str.hash, parent->state);
+ dprintk("%s: start ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx, need_lock: %d.\n",
+ __func__, ino, inode, str.name, str.hash, parent->state, need_lock);
if (ino) {
inode = ilookup(dir->i_sb, ino);
@@ -534,7 +530,7 @@
goto out;
}
- dprintk("%s: dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n",
+ dprintk("%s: no inode dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n",
__func__, dir, parent->ino,
str.name, str.len, parent->state, ino);
@@ -543,6 +539,10 @@
goto out;
}
+ err = pohmelfs_data_lock(parent, 0, ~0, lock_type);
+ if (err)
+ goto out;
+
err = pohmelfs_lookup_single(parent, &str, ino);
if (err)
goto out;
@@ -557,10 +557,10 @@
if (ino) {
inode = ilookup(dir->i_sb, ino);
- printk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n",
+ dprintk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n",
__func__, ino, inode, str.name, str.hash);
if (!inode) {
- printk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n",
+ dprintk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n",
__func__, ino, str.name, str.hash);
//return NULL;
return ERR_PTR(-EACCES);
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index 5bf1650..b2eaf90 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -1169,16 +1169,17 @@
static int pohmelfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
{
struct inode *inode = dentry->d_inode;
+#if 0
struct pohmelfs_inode *pi = POHMELFS_I(inode);
int err;
err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK);
if (err)
return err;
-
dprintk("%s: ino: %llu, mode: %o, uid: %u, gid: %u, size: %llu.\n",
__func__, pi->ino, inode->i_mode, inode->i_uid,
inode->i_gid, inode->i_size);
+#endif
generic_fillattr(inode, stat);
return 0;
@@ -1342,14 +1343,6 @@
kfree(psb);
sb->s_fs_info = NULL;
-
- pohmelfs_ftrans_exit();
-}
-
-static int pohmelfs_remount(struct super_block *sb, int *flags, char *data)
-{
- *flags |= MS_RDONLY;
- return 0;
}
static int pohmelfs_statfs(struct dentry *dentry, struct kstatfs *buf)
@@ -1394,42 +1387,33 @@
return 0;
}
-static const struct super_operations pohmelfs_sb_ops = {
- .alloc_inode = pohmelfs_alloc_inode,
- .destroy_inode = pohmelfs_destroy_inode,
- .drop_inode = pohmelfs_drop_inode,
- .write_inode = pohmelfs_write_inode,
- .put_super = pohmelfs_put_super,
- .remount_fs = pohmelfs_remount,
- .statfs = pohmelfs_statfs,
- .show_options = pohmelfs_show_options,
-};
-
enum {
pohmelfs_opt_idx,
+ pohmelfs_opt_crypto_thread_num,
+ pohmelfs_opt_trans_max_pages,
+ pohmelfs_opt_crypto_fail_unsupported,
+
+ /* Remountable options */
pohmelfs_opt_trans_scan_timeout,
pohmelfs_opt_drop_scan_timeout,
pohmelfs_opt_wait_on_page_timeout,
pohmelfs_opt_trans_retries,
- pohmelfs_opt_crypto_thread_num,
- pohmelfs_opt_trans_max_pages,
- pohmelfs_opt_crypto_fail_unsupported,
pohmelfs_opt_mcache_timeout,
};
static struct match_token pohmelfs_tokens[] = {
{pohmelfs_opt_idx, "idx=%u"},
+ {pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"},
+ {pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"},
+ {pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"},
{pohmelfs_opt_trans_scan_timeout, "trans_scan_timeout=%u"},
{pohmelfs_opt_drop_scan_timeout, "drop_scan_timeout=%u"},
{pohmelfs_opt_wait_on_page_timeout, "wait_on_page_timeout=%u"},
{pohmelfs_opt_trans_retries, "trans_retries=%u"},
- {pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"},
- {pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"},
- {pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"},
{pohmelfs_opt_mcache_timeout, "mcache_timeout=%u"},
};
-static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb)
+static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb, int remount)
{
char *p;
substring_t args[MAX_OPT_ARGS];
@@ -1449,6 +1433,9 @@
if (err)
return err;
+ if (remount && token <= pohmelfs_opt_crypto_fail_unsupported)
+ continue;
+
switch (token) {
case pohmelfs_opt_idx:
psb->idx = option;
@@ -1485,6 +1472,25 @@
return 0;
}
+static int pohmelfs_remount(struct super_block *sb, int *flags, char *data)
+{
+ int err;
+ struct pohmelfs_sb *psb = POHMELFS_SB(sb);
+ unsigned long old_sb_flags = sb->s_flags;
+
+ err = pohmelfs_parse_options(data, psb, 1);
+ if (err)
+ goto err_out_restore;
+
+ if (!(*flags & MS_RDONLY))
+ sb->s_flags &= ~MS_RDONLY;
+ return 0;
+
+err_out_restore:
+ sb->s_flags = old_sb_flags;
+ return err;
+}
+
static void pohmelfs_flush_inode(struct pohmelfs_inode *pi, unsigned int count)
{
struct inode *inode = &pi->vfs_inode;
@@ -1753,6 +1759,57 @@
return err;
}
+static int pohmelfs_show_stats(struct seq_file *m, struct vfsmount *mnt)
+{
+ struct netfs_state *st;
+ struct pohmelfs_ctl *ctl;
+ struct pohmelfs_sb *psb = POHMELFS_SB(mnt->mnt_sb);
+ struct pohmelfs_config *c;
+
+ mutex_lock(&psb->state_lock);
+
+ seq_printf(m, "\nidx addr(:port) socket_type protocol active priority permissions\n");
+
+ list_for_each_entry(c, &psb->state_list, config_entry) {
+ st = &c->state;
+ ctl = &st->ctl;
+
+ seq_printf(m, "%u ", ctl->idx);
+ if (ctl->addr.sa_family == AF_INET) {
+ struct sockaddr_in *sin = (struct sockaddr_in *)&st->ctl.addr;
+ //seq_printf(m, "%pi4:%u", &sin->sin_addr.s_addr, ntohs(sin->sin_port));
+ seq_printf(m, "%u.%u.%u.%u:%u", NIPQUAD(sin->sin_addr.s_addr), ntohs(sin->sin_port));
+ } else if (ctl->addr.sa_family == AF_INET6) {
+ struct sockaddr_in6 *sin = (struct sockaddr_in6 *)&st->ctl.addr;
+ seq_printf(m, "%pi6:%u", &sin->sin6_addr, ntohs(sin->sin6_port));
+ } else {
+ unsigned int i;
+ for (i=0; i<ctl->addrlen; ++i)
+ seq_printf(m, "%02x.", ctl->addr.addr[i]);
+ }
+
+ seq_printf(m, " %u %u %d %u %x\n",
+ ctl->type, ctl->proto,
+ st->socket != NULL,
+ ctl->prio, ctl->perm);
+ }
+ mutex_unlock(&psb->state_lock);
+
+ return 0;
+}
+
+static const struct super_operations pohmelfs_sb_ops = {
+ .alloc_inode = pohmelfs_alloc_inode,
+ .destroy_inode = pohmelfs_destroy_inode,
+ .drop_inode = pohmelfs_drop_inode,
+ .write_inode = pohmelfs_write_inode,
+ .put_super = pohmelfs_put_super,
+ .remount_fs = pohmelfs_remount,
+ .statfs = pohmelfs_statfs,
+ .show_options = pohmelfs_show_options,
+ .show_stats = pohmelfs_show_stats,
+};
+
/*
* Allocate private superblock and create root dir.
*/
@@ -1764,8 +1821,6 @@
struct pohmelfs_inode *npi;
struct qstr str;
- pohmelfs_ftrans_init();
-
psb = kzalloc(sizeof(struct pohmelfs_sb), GFP_KERNEL);
if (!psb)
goto err_out_exit;
@@ -1816,7 +1871,7 @@
mutex_init(&psb->state_lock);
INIT_LIST_HEAD(&psb->state_list);
- err = pohmelfs_parse_options((char *) data, psb);
+ err = pohmelfs_parse_options((char *) data, psb, 0);
if (err)
goto err_out_free_sb;
@@ -1845,6 +1900,8 @@
err = PTR_ERR(npi);
goto err_out_crypto_exit;
}
+ set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state);
+ clear_bit(NETFS_INODE_OWNED, &npi->state);
root = &npi->vfs_inode;
@@ -1887,11 +1944,29 @@
mnt);
}
+/*
+ * We need this to sync all inodes earlier, since when writeback
+ * is invoked from the umount/mntput path dcache is already shrunk,
+ * see generic_shutdown_super(), and no inodes can access the path.
+ */
+static void pohmelfs_kill_super(struct super_block *sb)
+{
+ struct writeback_control wbc = {
+ .sync_mode = WB_SYNC_ALL,
+ .range_start = 0,
+ .range_end = LLONG_MAX,
+ .nr_to_write = LONG_MAX,
+ };
+ generic_sync_sb_inodes(sb, &wbc);
+
+ kill_anon_super(sb);
+}
+
static struct file_system_type pohmel_fs_type = {
.owner = THIS_MODULE,
.name = "pohmel",
.get_sb = pohmelfs_get_sb,
- .kill_sb = kill_anon_super,
+ .kill_sb = pohmelfs_kill_super,
};
/*
diff --git a/drivers/staging/pohmelfs/lock.c b/drivers/staging/pohmelfs/lock.c
index ad4a185..22fef18 100644
--- a/drivers/staging/pohmelfs/lock.c
+++ b/drivers/staging/pohmelfs/lock.c
@@ -41,7 +41,8 @@
path_len = err;
err = -ENOMEM;
- t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize, 0, 0);
+ t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize,
+ NETFS_TRANS_SINGLE_DST, 0);
if (!t)
goto err_out_exit;
diff --git a/drivers/staging/pohmelfs/net.c b/drivers/staging/pohmelfs/net.c
index c9b8540..11ecac0 100644
--- a/drivers/staging/pohmelfs/net.c
+++ b/drivers/staging/pohmelfs/net.c
@@ -26,55 +26,6 @@
#include "netfs.h"
-static int pohmelfs_ftrans_size = 10240;
-static u32 *pohmelfs_ftrans;
-
-int pohmelfs_ftrans_init(void)
-{
- pohmelfs_ftrans = vmalloc(pohmelfs_ftrans_size * 4);
- if (!pohmelfs_ftrans)
- return -ENOMEM;
-
- return 0;
-}
-
-void pohmelfs_ftrans_exit(void)
-{
- vfree(pohmelfs_ftrans);
-}
-
-void pohmelfs_ftrans_clean(u64 id)
-{
- if (pohmelfs_ftrans) {
- u32 i = id & 0xffffffff;
- int idx = i % pohmelfs_ftrans_size;
-
- pohmelfs_ftrans[idx] = 0;
- }
-}
-
-void pohmelfs_ftrans_update(u64 id)
-{
- if (pohmelfs_ftrans) {
- u32 i = id & 0xffffffff;
- int idx = i % pohmelfs_ftrans_size;
-
- pohmelfs_ftrans[idx] = i;
- }
-}
-
-int pohmelfs_ftrans_check(u64 id)
-{
- if (pohmelfs_ftrans) {
- u32 i = id & 0xffffffff;
- int idx = i % pohmelfs_ftrans_size;
-
- return (pohmelfs_ftrans[idx] == i);
- }
-
- return -1;
-}
-
/*
* Async machinery lives here.
* All commands being sent to server do _not_ require sync reply,
@@ -450,8 +401,24 @@
if (err != -EEXIST)
goto err_out_put;
} else {
+ struct dentry *dentry, *alias, *pd;
+
set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state);
clear_bit(NETFS_INODE_OWNED, &npi->state);
+
+ pd = d_find_alias(&parent->vfs_inode);
+ if (pd) {
+ str.hash = full_name_hash(str.name, str.len);
+ dentry = d_alloc(pd, &str);
+ if (dentry) {
+ alias = d_materialise_unique(dentry, &npi->vfs_inode);
+ if (alias)
+ dput(dentry);
+ }
+
+ dput(dentry);
+ dput(pd);
+ }
}
}
out:
@@ -638,15 +605,12 @@
if (dst) {
netfs_trans_remove_nolock(dst, st);
t = dst->trans;
-
- pohmelfs_ftrans_update(cmd->start);
}
mutex_unlock(&st->trans_lock);
if (!t) {
- int check = pohmelfs_ftrans_check(cmd->start);
- printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u, double: %d.\n",
- __func__, cmd->start, cmd->id, cmd->size, cmd->ext, check);
+ printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u.\n",
+ __func__, cmd->start, cmd->id, cmd->size, cmd->ext);
err = -EINVAL;
goto out;
}
diff --git a/drivers/staging/pohmelfs/netfs.h b/drivers/staging/pohmelfs/netfs.h
index 2ff21ae..c78cfcb 100644
--- a/drivers/staging/pohmelfs/netfs.h
+++ b/drivers/staging/pohmelfs/netfs.h
@@ -87,6 +87,7 @@
POHMELFS_FLAGS_DEL, /* Network state control message for DEL */
POHMELFS_FLAGS_SHOW, /* Network state control message for SHOW */
POHMELFS_FLAGS_CRYPTO, /* Crypto data control message */
+ POHMELFS_FLAGS_MODIFY, /* Network state modification message */
};
/*
@@ -116,16 +117,20 @@
unsigned char data[0]; /* Algorithm string, key and IV */
};
+#define POHMELFS_IO_PERM_READ (1<<0)
+#define POHMELFS_IO_PERM_WRITE (1<<1)
+
/*
* Configuration command used to create table of different remote servers.
*/
struct pohmelfs_ctl
{
- unsigned int idx; /* Config index */
- unsigned int type; /* Socket type */
- unsigned int proto; /* Socket protocol */
- unsigned int addrlen; /* Size of the address */
- unsigned short unused; /* Align structure by 4 bytes */
+ __u32 idx; /* Config index */
+ __u32 type; /* Socket type */
+ __u32 proto; /* Socket protocol */
+ __u16 addrlen; /* Size of the address */
+ __u16 perm; /* IO permission */
+ __u16 prio; /* IO priority */
struct saddr addr; /* Remote server address */
};
@@ -921,12 +926,6 @@
pohmelfs_mcache_free(psb, m);
}
-int pohmelfs_ftrans_init(void);
-void pohmelfs_ftrans_exit(void);
-void pohmelfs_ftrans_update(u64 id);
-int pohmelfs_ftrans_check(u64 id);
-void pohmelfs_ftrans_clean(u64 id);
-
#endif /* __KERNEL__*/
#endif /* __NETFS_H */
diff --git a/drivers/staging/pohmelfs/trans.c b/drivers/staging/pohmelfs/trans.c
index bcb5942..fef5f9b 100644
--- a/drivers/staging/pohmelfs/trans.c
+++ b/drivers/staging/pohmelfs/trans.c
@@ -456,34 +456,25 @@
__func__, t, t->gen, t->iovec.iov_len, t->page_num, psb->active_state);
#endif
mutex_lock(&psb->state_lock);
-
- if ((t->flags & NETFS_TRANS_SINGLE_DST) && psb->active_state) {
- st = &psb->active_state->state;
-
- err = -EPIPE;
- if (netfs_state_poll(st) & POLLOUT) {
- err = netfs_trans_push_dst(t, st);
- if (!err) {
- err = netfs_trans_send(t, st);
- if (err) {
- netfs_trans_drop_last(t, st);
- } else {
- pohmelfs_switch_active(psb);
- goto out;
- }
- }
- }
- pohmelfs_switch_active(psb);
- }
-
list_for_each_entry(c, &psb->state_list, config_entry) {
st = &c->state;
+ if (t->flags & NETFS_TRANS_SINGLE_DST) {
+ if (!(st->ctl.perm & POHMELFS_IO_PERM_READ))
+ continue;
+ } else {
+ if (!(st->ctl.perm & POHMELFS_IO_PERM_WRITE))
+ continue;
+ }
+
+ if (psb->active_state && (psb->active_state->state.ctl.prio >= st->ctl.prio))
+ st = &psb->active_state->state;
+
err = netfs_trans_push(t, st);
if (!err && (t->flags & NETFS_TRANS_SINGLE_DST))
break;
}
-out:
+
mutex_unlock(&psb->state_lock);
#if 0
dprintk("%s: fully sent t: %p, gen: %u, size: %u, page_num: %u, err: %d.\n",
@@ -501,8 +492,6 @@
t->gen = atomic_inc_return(&psb->trans_gen);
- pohmelfs_ftrans_clean(t->gen);
-
cmd->size = t->iovec.iov_len - sizeof(struct netfs_cmd) +
t->attached_size + t->attached_pages * sizeof(struct netfs_cmd);
cmd->cmd = NETFS_TRANS;
diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c
index cf17bcd..6c4396f 100644
--- a/drivers/staging/rt2860/rt_main_dev.c
+++ b/drivers/staging/rt2860/rt_main_dev.c
@@ -722,6 +722,20 @@
return (-1);
} /* End of rt28xx_open */
+static const struct net_device_ops rt2860_netdev_ops = {
+ .ndo_open = MainVirtualIF_open,
+ .ndo_stop = MainVirtualIF_close,
+ .ndo_do_ioctl = rt28xx_ioctl,
+ .ndo_get_stats = RT28xx_get_ether_stats,
+ .ndo_validate_addr = NULL,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+ .ndo_start_xmit = IKANOS_DataFramesTx,
+#else
+ .ndo_start_xmit = rt28xx_send_packets,
+#endif
+};
/* Must not be called for mdev and apdev */
static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
@@ -733,11 +747,6 @@
//ether_setup(dev);
- dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
- dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
#ifdef CONFIG_STA_SUPPORT
#if WIRELESS_EXT >= 12
@@ -760,12 +769,8 @@
#if WIRELESS_EXT < 21
dev->get_wireless_stats = rt28xx_get_wireless_stats;
#endif
- dev->get_stats = RT28xx_get_ether_stats;
- dev->open = MainVirtualIF_open; //rt28xx_open;
- dev->stop = MainVirtualIF_close; //rt28xx_close;
dev->priv_flags = INT_MAIN;
- dev->do_ioctl = rt28xx_ioctl;
- dev->validate_addr = NULL;
+ dev->netdev_ops = &rt2860_netdev_ops;
// find available device name
for (i = 0; i < 8; i++)
{
diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h
index 5dd15aa..a42caa3 100644
--- a/drivers/staging/rt2870/rt2870.h
+++ b/drivers/staging/rt2870/rt2870.h
@@ -96,6 +96,7 @@
{USB_DEVICE(0x0DF6,0x002B)}, /* Sitecom */ \
{USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */ \
{USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */ \
+ {USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom */ \
{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */ \
{USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */ \
{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */ \
diff --git a/drivers/staging/rt2870/rt_main_dev.c b/drivers/staging/rt2870/rt_main_dev.c
index 313ecea..48ad411 100644
--- a/drivers/staging/rt2870/rt_main_dev.c
+++ b/drivers/staging/rt2870/rt_main_dev.c
@@ -855,6 +855,20 @@
return (-1);
} /* End of rt28xx_open */
+static const struct net_device_ops rt2870_netdev_ops = {
+ .ndo_open = MainVirtualIF_open,
+ .ndo_stop = MainVirtualIF_close,
+ .ndo_do_ioctl = rt28xx_ioctl,
+ .ndo_get_stats = RT28xx_get_ether_stats,
+ .ndo_validate_addr = NULL,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+ .ndo_start_xmit = IKANOS_DataFramesTx,
+#else
+ .ndo_start_xmit = rt28xx_send_packets,
+#endif
+};
/* Must not be called for mdev and apdev */
static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
@@ -866,12 +880,6 @@
//ether_setup(dev);
- dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
- dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
-
// dev->set_multicast_list = ieee80211_set_multicast_list;
// dev->change_mtu = ieee80211_change_mtu;
#ifdef CONFIG_STA_SUPPORT
@@ -895,16 +903,10 @@
#if WIRELESS_EXT < 21
dev->get_wireless_stats = rt28xx_get_wireless_stats;
#endif
- dev->get_stats = RT28xx_get_ether_stats;
- dev->open = MainVirtualIF_open; //rt28xx_open;
- dev->stop = MainVirtualIF_close; //rt28xx_close;
// dev->uninit = ieee80211_if_reinit;
// dev->destructor = ieee80211_if_free;
dev->priv_flags = INT_MAIN;
- dev->do_ioctl = rt28xx_ioctl;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
- dev->validate_addr = NULL;
-#endif
+ dev->netdev_ops = &rt2870_netdev_ops;
// find available device name
for (i = 0; i < 8; i++)
{
diff --git a/drivers/staging/rt3070/rt_main_dev.c b/drivers/staging/rt3070/rt_main_dev.c
index c000646..81f769c 100644
--- a/drivers/staging/rt3070/rt_main_dev.c
+++ b/drivers/staging/rt3070/rt_main_dev.c
@@ -436,7 +436,6 @@
// OID_SET_HT_PHYMODE SetHT;
// WPDMA_GLO_CFG_STRUC GloCfg;
UINT32 MacCsr0 = 0;
- UINT32 MacValue = 0;
#ifdef RT2870
#ifdef INF_AMAZON_SE
@@ -849,6 +848,20 @@
return (-1);
} /* End of rt28xx_open */
+static const struct net_device_ops rt3070_netdev_ops = {
+ .ndo_open = MainVirtualIF_open,
+ .ndo_stop = MainVirtualIF_close,
+ .ndo_do_ioctl = rt28xx_ioctl,
+ .ndo_get_stats = RT28xx_get_ether_stats,
+ .ndo_validate_addr = NULL,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+ .ndo_start_xmit = IKANOS_DataFramesTx,
+#else
+ .ndo_start_xmit = rt28xx_send_packets,
+#endif
+};
/* Must not be called for mdev and apdev */
static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
@@ -860,12 +873,6 @@
//ether_setup(dev);
- dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
- dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
-
// dev->set_multicast_list = ieee80211_set_multicast_list;
// dev->change_mtu = ieee80211_change_mtu;
#ifdef CONFIG_STA_SUPPORT
@@ -889,16 +896,10 @@
#if WIRELESS_EXT < 21
dev->get_wireless_stats = rt28xx_get_wireless_stats;
#endif
- dev->get_stats = RT28xx_get_ether_stats;
- dev->open = MainVirtualIF_open; //rt28xx_open;
- dev->stop = MainVirtualIF_close; //rt28xx_close;
// dev->uninit = ieee80211_if_reinit;
// dev->destructor = ieee80211_if_free;
dev->priv_flags = INT_MAIN;
- dev->do_ioctl = rt28xx_ioctl;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
- dev->validate_addr = NULL;
-#endif
+ dev->netdev_ops = &rt3070_netdev_ops;
// find available device name
for (i = 0; i < 8; i++)
{
diff --git a/drivers/staging/slicoss/README b/drivers/staging/slicoss/README
index 2d5b112..70f49099 100644
--- a/drivers/staging/slicoss/README
+++ b/drivers/staging/slicoss/README
@@ -10,7 +10,36 @@
- move firmware loading to request_firmware()
- remove direct memory access of structures
- any remaining sparse and checkpatch.pl warnings
- - any netdev recommended changes
+
+ - use net_device_ops
+ - use dev->stats rather than adapter->stats
+ - don't cast netdev_priv it is already void
+ - use compare_ether_addr
+ - GET RID OF MACROS
+ - work on all architectures
+ - without CONFIG_X86_64 confusion
+ - do 64 bit correctly
+ - don't depend on order of union
+ - get rid of ASSERT(), use BUG() instead but only where necessary
+ looks like most aren't really useful
+ - no new SIOCDEVPRIVATE ioctl allowed
+ - don't use module_param for configuring interrupt mitigation
+ use ethtool instead
+ - reorder code to elminate use of forward declarations
+ - don't keep private linked list of drivers.
+ - remove all the gratiutous debug infrastructure
+ - use PCI_DEVICE()
+ - do ethtool correctly using ethtool_ops
+ - NAPI?
+ - wasted overhead of extra stats
+ - state variables for things that are
+ easily availble and shouldn't be kept in card structure, cardnum, ...
+ slotnumber, events, ...
+ - get rid of slic_spinlock wrapper
+ - volatile == bad design => bad code
+ - locking too fine grained, not designed just throw more locks
+ at problem
+
Please send patches to:
Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index 9481563..6f5d0bf 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -345,6 +345,19 @@
return;
}
+static const struct net_device_ops slic_netdev_ops = {
+ .ndo_open = slic_entry_open,
+ .ndo_stop = slic_entry_halt,
+ .ndo_start_xmit = slic_xmit_start,
+ .ndo_do_ioctl = slic_ioctl,
+ .ndo_set_mac_address = slic_mac_set_address,
+ .ndo_get_stats = slic_get_stats,
+ .ndo_set_multicast_list = slic_mcast_set_list,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
static int __devinit slic_entry_probe(struct pci_dev *pcidev,
const struct pci_device_id *pci_tbl_entry)
{
@@ -442,13 +455,7 @@
netdev->base_addr = (unsigned long)adapter->memorybase;
netdev->irq = adapter->irq;
- netdev->open = slic_entry_open;
- netdev->stop = slic_entry_halt;
- netdev->hard_start_xmit = slic_xmit_start;
- netdev->do_ioctl = slic_ioctl;
- netdev->set_mac_address = slic_mac_set_address;
- netdev->get_stats = slic_get_stats;
- netdev->set_multicast_list = slic_mcast_set_list;
+ netdev->netdev_ops = &slic_netdev_ops;
slic_debug_adapter_create(adapter);
@@ -1260,7 +1267,7 @@
}
/* Doesn't already exist. Allocate a structure to hold it */
- mcaddr = kmalloc(sizeof(struct mcast_address), GFP_KERNEL);
+ mcaddr = kmalloc(sizeof(struct mcast_address), GFP_ATOMIC);
if (mcaddr == NULL)
return 1;
@@ -2284,7 +2291,7 @@
}
if (!physcard) {
/* no structure allocated for this physical card yet */
- physcard = kzalloc(sizeof(struct physcard), GFP_KERNEL);
+ physcard = kzalloc(sizeof(struct physcard), GFP_ATOMIC);
ASSERT(physcard);
physcard->next = slic_global.phys_card;
diff --git a/drivers/staging/stlc45xx/Kconfig b/drivers/staging/stlc45xx/Kconfig
index 8d3f46f..947fb75 100644
--- a/drivers/staging/stlc45xx/Kconfig
+++ b/drivers/staging/stlc45xx/Kconfig
@@ -1,6 +1,6 @@
config STLC45XX
tristate "stlc4550/4560 support"
- depends on MAC80211 && WLAN_80211 && SPI_MASTER
+ depends on MAC80211 && WLAN_80211 && SPI_MASTER && GENERIC_HARDIRQS
---help---
This is a driver for stlc4550 and stlc4560 chipsets.
diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c
index 891f6e3..076b3f7 100644
--- a/drivers/staging/sxg/sxg.c
+++ b/drivers/staging/sxg/sxg.c
@@ -322,6 +322,8 @@
int ret,i;
if (!adapter->intrregistered) {
+ spin_unlock_irqrestore(&sxg_global.driver_lock,
+ sxg_global.flags);
for (i=0; i<adapter->nr_msix_entries; i++) {
ret = request_irq (adapter->msi_entries[i].vector,
sxg_isr,
@@ -329,6 +331,8 @@
adapter->netdev->name,
adapter->netdev);
if (ret) {
+ spin_lock_irqsave(&sxg_global.driver_lock,
+ sxg_global.flags);
DBG_ERROR("sxg: MSI-X request_irq (%s) "
"FAILED [%x]\n", adapter->netdev->name,
ret);
@@ -336,6 +340,7 @@
}
}
}
+ spin_lock_irqsave(&sxg_global.driver_lock, sxg_global.flags);
adapter->msi_enabled = TRUE;
adapter->intrregistered = 1;
adapter->IntRegistered = TRUE;
@@ -896,6 +901,22 @@
return status;
}
+static const struct net_device_ops sxg_netdev_ops = {
+ .ndo_open = sxg_entry_open,
+ .ndo_stop = sxg_entry_halt,
+ .ndo_start_xmit = sxg_send_packets,
+ .ndo_do_ioctl = sxg_ioctl,
+ .ndo_change_mtu = sxg_change_mtu,
+ .ndo_get_stats = sxg_get_stats,
+ .ndo_set_multicast_list = sxg_mcast_set_list,
+ .ndo_validate_addr = eth_validate_addr,
+#if XXXTODO
+ .ndo_set_mac_address = sxg_mac_set_address,
+#else
+ .ndo_set_mac_address = eth_mac_addr,
+#endif
+};
+
static int sxg_entry_probe(struct pci_dev *pcidev,
const struct pci_device_id *pci_tbl_entry)
{
@@ -1095,16 +1116,7 @@
netdev->base_addr = (unsigned long)adapter->base_addr;
netdev->irq = adapter->irq;
- netdev->open = sxg_entry_open;
- netdev->stop = sxg_entry_halt;
- netdev->hard_start_xmit = sxg_send_packets;
- netdev->do_ioctl = sxg_ioctl;
- netdev->change_mtu = sxg_change_mtu;
-#if XXXTODO
- netdev->set_mac_address = sxg_mac_set_address;
-#endif
- netdev->get_stats = sxg_get_stats;
- netdev->set_multicast_list = sxg_mcast_set_list;
+ netdev->netdev_ops = &sxg_netdev_ops;
SET_ETHTOOL_OPS(netdev, &sxg_nic_ethtool_ops);
netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
err = sxg_set_interrupt_capability(adapter);
@@ -2247,6 +2259,8 @@
DBG_ERROR("sxg: %s EXIT\n", __func__);
spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags);
+ mod_timer(&adapter->watchdog_timer, jiffies);
+
return STATUS_SUCCESS;
}
@@ -2568,6 +2582,7 @@
u64 phys_addr;
unsigned long flags;
unsigned long queue_id=0;
+ int offload_cksum = 0;
SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSgl",
pSgl, SxgSgl, 0, 0);
@@ -2606,7 +2621,11 @@
struct iphdr *ip;
ip = ip_hdr(skb);
- if ((ip->protocol == IPPROTO_TCP)&&(DataLength >= sizeof(
+ if (ip->protocol == IPPROTO_TCP)
+ offload_cksum = 1;
+ if (!offload_cksum || !tcp_hdr(skb))
+ queue_id = 0;
+ else if (offload_cksum && (DataLength >= sizeof(
struct tcphdr))){
queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ?
(ntohs (tcp_hdr(skb)->source) &
@@ -2615,8 +2634,11 @@
SXG_LARGE_SEND_QUEUE_MASK));
}
} else if (skb->protocol == htons(ETH_P_IPV6)) {
- if ((ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) && (DataLength >=
- sizeof(struct tcphdr)) ) {
+ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+ offload_cksum = 1;
+ if (!offload_cksum || !tcp_hdr(skb))
+ queue_id = 0;
+ else if (offload_cksum && (DataLength>=sizeof(struct tcphdr))){
queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ?
(ntohs (tcp_hdr(skb)->source) &
SXG_LARGE_SEND_QUEUE_MASK):
@@ -2645,23 +2667,38 @@
}
SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbCmd",
XmtCmd, XmtRingInfo->Head, XmtRingInfo->Tail, 0);
- /* Update stats */
- adapter->stats.tx_packets++;
- adapter->stats.tx_bytes += DataLength;
-#if XXXTODO /* Stats stuff */
- if (SXG_MULTICAST_PACKET(EtherHdr)) {
- if (SXG_BROADCAST_PACKET(EtherHdr)) {
- adapter->Stats.DumbXmtBcastPkts++;
- adapter->Stats.DumbXmtBcastBytes += DataLength;
+ memset(XmtCmd, '\0', sizeof(*XmtCmd));
+ XmtCmd->SgEntries = 1;
+ XmtCmd->Flags = 0;
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ /*
+ * We need to set the Checkum in IP header to 0. This is
+ * required by hardware.
+ */
+ if (offload_cksum) {
+ ip_hdr(skb)->check = 0x0;
+ XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP;
+ XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP;
+ /*
+ * Dont know if length will require a change in
+ * case of VLAN
+ */
+ XmtCmd->CsumFlags.MacLen = ETH_HLEN;
+ XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >>
+ SXG_NW_HDR_LEN_SHIFT;
} else {
- adapter->Stats.DumbXmtMcastPkts++;
- adapter->Stats.DumbXmtMcastBytes += DataLength;
+ if (skb_checksum_help(skb)){
+ printk(KERN_EMERG "Dropped UDP packet for"
+ " incorrect checksum calculation\n");
+ if (XmtCmd)
+ SXG_ABORT_CMD(XmtRingInfo);
+ spin_unlock_irqrestore(&adapter->XmtZeroLock,
+ flags);
+ return STATUS_SUCCESS;
+ }
}
- } else {
- adapter->Stats.DumbXmtUcastPkts++;
- adapter->Stats.DumbXmtUcastBytes += DataLength;
}
-#endif
+
/*
* Fill in the command
* Copy out the first SGE to the command and adjust for offset
@@ -2679,31 +2716,17 @@
(SXG_INVALID_SGL(phys_addr,skb->data_len)))
{
spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
+ if (XmtCmd)
+ SXG_ABORT_CMD(XmtRingInfo);
/* Silently drop this packet */
printk(KERN_EMERG"Dropped a packet for 64k boundary problem\n");
return STATUS_SUCCESS;
}
- memset(XmtCmd, '\0', sizeof(*XmtCmd));
XmtCmd->Buffer.FirstSgeAddress = phys_addr;
XmtCmd->Buffer.FirstSgeLength = DataLength;
XmtCmd->Buffer.SgeOffset = 0;
XmtCmd->Buffer.TotalLength = DataLength;
- XmtCmd->SgEntries = 1;
- XmtCmd->Flags = 0;
- if (skb->ip_summed == CHECKSUM_PARTIAL) {
- /*
- * We need to set the Checkum in IP header to 0. This is
- * required by hardware.
- */
- ip_hdr(skb)->check = 0x0;
- XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP;
- XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP;
- /* Dont know if length will require a change in case of VLAN */
- XmtCmd->CsumFlags.MacLen = ETH_HLEN;
- XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >>
- SXG_NW_HDR_LEN_SHIFT;
- }
/*
* Advance transmit cmd descripter by 1.
* NOTE - See comments in SxgTcpOutput where we write
@@ -2715,6 +2738,24 @@
ASSERT((queue_id & ~SXG_LARGE_SEND_QUEUE_MASK) == 0);
WRITE_REG(adapter->UcodeRegs[0].XmtCmd, ((queue_id << 16) | 1), TRUE);
adapter->Stats.XmtQLen++; /* Stats within lock */
+ /* Update stats */
+ adapter->stats.tx_packets++;
+ adapter->stats.tx_bytes += DataLength;
+#if XXXTODO /* Stats stuff */
+ if (SXG_MULTICAST_PACKET(EtherHdr)) {
+ if (SXG_BROADCAST_PACKET(EtherHdr)) {
+ adapter->Stats.DumbXmtBcastPkts++;
+ adapter->Stats.DumbXmtBcastBytes += DataLength;
+ } else {
+ adapter->Stats.DumbXmtMcastPkts++;
+ adapter->Stats.DumbXmtMcastBytes += DataLength;
+ }
+ } else {
+ adapter->Stats.DumbXmtUcastPkts++;
+ adapter->Stats.DumbXmtUcastBytes += DataLength;
+ }
+#endif
+
spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDumSgl2",
XmtCmd, pSgl, SxgSgl, 0);
diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c
index 85b7054..9c62f78 100644
--- a/drivers/staging/uc2322/aten2011.c
+++ b/drivers/staging/uc2322/aten2011.c
@@ -603,10 +603,9 @@
tty = tty_port_tty_get(&ATEN2011_port->port->port);
- if (tty && ATEN2011_port->open) {
+ if (tty && ATEN2011_port->open)
/* tell the tty driver that something has changed */
- wake_up_interruptible(&tty->write_wait);
- }
+ tty_wakeup(tty);
/* schedule_work(&ATEN2011_port->port->work); */
tty_kref_put(tty);
@@ -825,12 +824,6 @@
status = 0;
status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
- /* force low_latency on so that our tty_push actually forces *
- * the data through,otherwise it is scheduled, and with *
- * high data rates (like with OHCI) data can get lost. */
-
- if (tty)
- tty->low_latency = 1;
/*
* Check to see if we've set up our endpoint info yet
* (can't set it up in ATEN2011_startup as the structures
@@ -1473,22 +1466,7 @@
cflag = tty->termios->c_cflag;
- if (!cflag) {
- dbg("%s %s", __func__, "cflag is NULL");
- return;
- }
-
- /* check that they really want us to change something */
- if (old_termios) {
- if ((cflag == old_termios->c_cflag) &&
- (RELEVANT_IFLAG(tty->termios->c_iflag) ==
- RELEVANT_IFLAG(old_termios->c_iflag))) {
- dbg("%s", "Nothing to change");
- return;
- }
- }
-
- dbg("%s - clfag %08x iflag %08x", __func__,
+ dbg("%s - cflag %08x iflag %08x", __func__,
tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
if (old_termios) {
diff --git a/drivers/staging/wlan-ng/p80211netdev.c b/drivers/staging/wlan-ng/p80211netdev.c
index b2a606a..393e4df 100644
--- a/drivers/staging/wlan-ng/p80211netdev.c
+++ b/drivers/staging/wlan-ng/p80211netdev.c
@@ -711,6 +711,20 @@
return 0;
}
+static const struct net_device_ops p80211_netdev_ops = {
+ .ndo_init = p80211knetdev_init,
+ .ndo_open = p80211knetdev_open,
+ .ndo_stop = p80211knetdev_stop,
+ .ndo_get_stats = p80211knetdev_get_stats,
+ .ndo_start_xmit = p80211knetdev_hard_start_xmit,
+ .ndo_set_multicast_list = p80211knetdev_set_multicast_list,
+ .ndo_do_ioctl = p80211knetdev_do_ioctl,
+ .ndo_set_mac_address = p80211knetdev_set_mac_address,
+ .ndo_tx_timeout = p80211knetdev_tx_timeout,
+ .ndo_change_mtu = wlan_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
/*----------------------------------------------------------------
* wlan_setup
*
@@ -756,11 +770,7 @@
} else {
wlandev->netdev = dev;
dev->ml_priv = wlandev;
- dev->hard_start_xmit = p80211knetdev_hard_start_xmit;
- dev->get_stats = p80211knetdev_get_stats;
- dev->init = p80211knetdev_init;
- dev->open = p80211knetdev_open;
- dev->stop = p80211knetdev_stop;
+ dev->netdev_ops = &p80211_netdev_ops;
mutex_init(&wlandev->ioctl_lock);
/* block ioctls until fully initialised. Don't forget to call
diff --git a/drivers/uio/uio_cif.c b/drivers/uio/uio_cif.c
index c60b8fc..28034c8 100644
--- a/drivers/uio/uio_cif.c
+++ b/drivers/uio/uio_cif.c
@@ -147,5 +147,6 @@
module_init(hilscher_init_module);
module_exit(hilscher_exit_module);
+MODULE_DEVICE_TABLE(pci, hilscher_pci_ids);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Hans J. Koch, Benedikt Spranger");
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 869d47c..0a69c09 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -546,10 +546,6 @@
tty->driver_data = acm;
acm->tty = tty;
- /* force low_latency on so that our tty_push actually forces the data through,
- otherwise it is scheduled, and with high data rates data can get lost. */
- tty->low_latency = 1;
-
if (usb_autopm_get_interface(acm->control) < 0)
goto early_bail;
else
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 3771d6e..34e6108 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -652,7 +652,7 @@
iface = &intf->altsetting[0];
ep = &iface->endpoint[0].desc;
- if (!usb_endpoint_is_int_in(ep)) {
+ if (!ep || !usb_endpoint_is_int_in(ep)) {
rv = -EINVAL;
goto err;
}
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index df3c539..3086090 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -841,7 +841,7 @@
ret = checkintf(ps, ret);
if (ret)
return ret;
- usb_settoggle(ps->dev, ep & 0xf, !(ep & USB_DIR_IN), 0);
+ usb_reset_endpoint(ps->dev, ep);
return 0;
}
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 81fa850..42b93da 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1539,6 +1539,32 @@
hcd->driver->endpoint_disable(hcd, ep);
}
+/**
+ * usb_hcd_reset_endpoint - reset host endpoint state
+ * @udev: USB device.
+ * @ep: the endpoint to reset.
+ *
+ * Resets any host endpoint state such as the toggle bit, sequence
+ * number and current window.
+ */
+void usb_hcd_reset_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+ if (hcd->driver->endpoint_reset)
+ hcd->driver->endpoint_reset(hcd, ep);
+ else {
+ int epnum = usb_endpoint_num(&ep->desc);
+ int is_out = usb_endpoint_dir_out(&ep->desc);
+ int is_control = usb_endpoint_xfer_control(&ep->desc);
+
+ usb_settoggle(udev, epnum, is_out, 0);
+ if (is_control)
+ usb_settoggle(udev, epnum, !is_out, 0);
+ }
+}
+
/* Protect against drivers that try to unlink URBs after the device
* is gone, by waiting until all unlinks for @udev are finished.
* Since we don't currently track URBs by device, simply wait until
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index f750eb1..e7d4479 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -206,6 +206,11 @@
void (*endpoint_disable)(struct usb_hcd *hcd,
struct usb_host_endpoint *ep);
+ /* (optional) reset any endpoint state such as sequence number
+ and current window */
+ void (*endpoint_reset)(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep);
+
/* root hub support */
int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
int (*hub_control) (struct usb_hcd *hcd,
@@ -234,6 +239,8 @@
struct usb_host_endpoint *ep);
extern void usb_hcd_disable_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep);
+extern void usb_hcd_reset_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep);
extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
extern int usb_hcd_get_frame_number(struct usb_device *udev);
@@ -279,6 +286,13 @@
extern void usb_hc_died(struct usb_hcd *hcd);
extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
+/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
+#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
+#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
+#define usb_settoggle(dev, ep, out, bit) \
+ ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
+ ((bit) << (ep)))
+
/* -------------------------------------------------------------------------- */
/* Enumeration is only for the hub driver, or HCD virtual root hubs */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 30a0690..b626283 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1002,8 +1002,7 @@
* the copy in usb-storage, for as long as we need two copies.
*/
- /* toggle was reset by the clear */
- usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0);
+ usb_reset_endpoint(dev, endp);
return 0;
}
@@ -1076,6 +1075,30 @@
}
/**
+ * usb_reset_endpoint - Reset an endpoint's state.
+ * @dev: the device whose endpoint is to be reset
+ * @epaddr: the endpoint's address. Endpoint number for output,
+ * endpoint number + USB_DIR_IN for input
+ *
+ * Resets any host-side endpoint state such as the toggle bit,
+ * sequence number or current window.
+ */
+void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr)
+{
+ unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
+ struct usb_host_endpoint *ep;
+
+ if (usb_endpoint_out(epaddr))
+ ep = dev->ep_out[epnum];
+ else
+ ep = dev->ep_in[epnum];
+ if (ep)
+ usb_hcd_reset_endpoint(dev, ep);
+}
+EXPORT_SYMBOL_GPL(usb_reset_endpoint);
+
+
+/**
* usb_disable_interface -- Disable all endpoints for an interface
* @dev: the device whose interface is being disabled
* @intf: pointer to the interface descriptor
@@ -1117,7 +1140,6 @@
usb_disable_endpoint(dev, i, true);
usb_disable_endpoint(dev, i + USB_DIR_IN, true);
}
- dev->toggle[0] = dev->toggle[1] = 0;
/* getting rid of interfaces will disconnect
* any drivers bound to them (a key side effect)
@@ -1154,28 +1176,24 @@
* usb_enable_endpoint - Enable an endpoint for USB communications
* @dev: the device whose interface is being enabled
* @ep: the endpoint
- * @reset_toggle: flag to set the endpoint's toggle back to 0
+ * @reset_ep: flag to reset the endpoint state
*
- * Resets the endpoint toggle if asked, and sets dev->ep_{in,out} pointers.
+ * Resets the endpoint state if asked, and sets dev->ep_{in,out} pointers.
* For control endpoints, both the input and output sides are handled.
*/
void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep,
- bool reset_toggle)
+ bool reset_ep)
{
int epnum = usb_endpoint_num(&ep->desc);
int is_out = usb_endpoint_dir_out(&ep->desc);
int is_control = usb_endpoint_xfer_control(&ep->desc);
- if (is_out || is_control) {
- if (reset_toggle)
- usb_settoggle(dev, epnum, 1, 0);
+ if (reset_ep)
+ usb_hcd_reset_endpoint(dev, ep);
+ if (is_out || is_control)
dev->ep_out[epnum] = ep;
- }
- if (!is_out || is_control) {
- if (reset_toggle)
- usb_settoggle(dev, epnum, 0, 0);
+ if (!is_out || is_control)
dev->ep_in[epnum] = ep;
- }
ep->enabled = 1;
}
@@ -1183,18 +1201,18 @@
* usb_enable_interface - Enable all the endpoints for an interface
* @dev: the device whose interface is being enabled
* @intf: pointer to the interface descriptor
- * @reset_toggles: flag to set the endpoints' toggles back to 0
+ * @reset_eps: flag to reset the endpoints' state
*
* Enables all the endpoints for the interface's current altsetting.
*/
void usb_enable_interface(struct usb_device *dev,
- struct usb_interface *intf, bool reset_toggles)
+ struct usb_interface *intf, bool reset_eps)
{
struct usb_host_interface *alt = intf->cur_altsetting;
int i;
for (i = 0; i < alt->desc.bNumEndpoints; ++i)
- usb_enable_endpoint(dev, &alt->endpoint[i], reset_toggles);
+ usb_enable_endpoint(dev, &alt->endpoint[i], reset_eps);
}
/**
@@ -1335,7 +1353,7 @@
* This issues a standard SET_CONFIGURATION request to the device using
* the current configuration. The effect is to reset most USB-related
* state in the device, including interface altsettings (reset to zero),
- * endpoint halts (cleared), and data toggle (only for bulk and interrupt
+ * endpoint halts (cleared), and endpoint state (only for bulk and interrupt
* endpoints). Other usbcore state is unchanged, including bindings of
* usb device drivers to interfaces.
*
@@ -1343,7 +1361,7 @@
* (multi-interface) devices. Instead, the driver for each interface may
* use usb_set_interface() on the interfaces it claims. Be careful though;
* some devices don't support the SET_INTERFACE request, and others won't
- * reset all the interface state (notably data toggles). Resetting the whole
+ * reset all the interface state (notably endpoint state). Resetting the whole
* configuration would affect other drivers' interfaces.
*
* The caller must own the device lock.
@@ -1376,8 +1394,6 @@
if (retval < 0)
return retval;
- dev->toggle[0] = dev->toggle[1] = 0;
-
/* re-init hc/hcd interface/endpoint state */
for (i = 0; i < config->desc.bNumInterfaces; i++) {
struct usb_interface *intf = config->interface[i];
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index dcfc072..7eee400 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -362,7 +362,7 @@
dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
/* ep0 maxpacket comes later, from device descriptor */
- usb_enable_endpoint(dev, &dev->ep0, true);
+ usb_enable_endpoint(dev, &dev->ep0, false);
dev->can_submit = 1;
/* Save readable and stable topology id, distinguishing devices
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 96d65ca..4007770 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -175,12 +175,6 @@
strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info);
}
-static u32 eth_get_link(struct net_device *net)
-{
- struct eth_dev *dev = netdev_priv(net);
- return dev->gadget->speed != USB_SPEED_UNKNOWN;
-}
-
/* REVISIT can also support:
* - WOL (by tracking suspends and issuing remote wakeup)
* - msglevel (implies updated messaging)
@@ -189,7 +183,7 @@
static struct ethtool_ops ops = {
.get_drvinfo = eth_get_drvinfo,
- .get_link = eth_get_link
+ .get_link = ethtool_op_get_link,
};
static void defer_kevent(struct eth_dev *dev, int flag)
diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c
index 958751c..c205078 100644
--- a/drivers/usb/host/whci/asl.c
+++ b/drivers/usb/host/whci/asl.c
@@ -122,7 +122,8 @@
process_inactive_qtd(whc, qset, td);
}
- update |= qset_add_qtds(whc, qset);
+ if (!qset->remove)
+ update |= qset_add_qtds(whc, qset);
done:
/*
@@ -254,23 +255,29 @@
spin_lock_irqsave(&whc->lock, flags);
+ err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+ if (err < 0) {
+ spin_unlock_irqrestore(&whc->lock, flags);
+ return err;
+ }
+
qset = get_qset(whc, urb, GFP_ATOMIC);
if (qset == NULL)
err = -ENOMEM;
else
err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
if (!err) {
- usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
if (!qset->in_sw_list)
asl_qset_insert_begin(whc, qset);
- }
+ } else
+ usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
spin_unlock_irqrestore(&whc->lock, flags);
if (!err)
queue_work(whc->workqueue, &whc->async_work);
- return 0;
+ return err;
}
/**
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index 1569afd..e019a50 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -186,6 +186,28 @@
}
}
+static void whc_endpoint_reset(struct usb_hcd *usb_hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+ struct whc *whc = wusbhc_to_whc(wusbhc);
+ struct whc_qset *qset;
+
+ qset = ep->hcpriv;
+ if (qset) {
+ qset->remove = 1;
+
+ if (usb_endpoint_xfer_bulk(&ep->desc)
+ || usb_endpoint_xfer_control(&ep->desc))
+ queue_work(whc->workqueue, &whc->async_work);
+ else
+ queue_work(whc->workqueue, &whc->periodic_work);
+
+ qset_reset(whc, qset);
+ }
+}
+
+
static struct hc_driver whc_hc_driver = {
.description = "whci-hcd",
.product_desc = "Wireless host controller",
@@ -200,6 +222,7 @@
.urb_enqueue = whc_urb_enqueue,
.urb_dequeue = whc_urb_dequeue,
.endpoint_disable = whc_endpoint_disable,
+ .endpoint_reset = whc_endpoint_reset,
.hub_status_data = wusbhc_rh_status_data,
.hub_control = wusbhc_rh_control,
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c
index df8b85f..ff4ef9e 100644
--- a/drivers/usb/host/whci/pzl.c
+++ b/drivers/usb/host/whci/pzl.c
@@ -128,7 +128,8 @@
process_inactive_qtd(whc, qset, td);
}
- update |= qset_add_qtds(whc, qset);
+ if (!qset->remove)
+ update |= qset_add_qtds(whc, qset);
done:
/*
@@ -282,23 +283,29 @@
spin_lock_irqsave(&whc->lock, flags);
+ err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+ if (err < 0) {
+ spin_unlock_irqrestore(&whc->lock, flags);
+ return err;
+ }
+
qset = get_qset(whc, urb, GFP_ATOMIC);
if (qset == NULL)
err = -ENOMEM;
else
err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
if (!err) {
- usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
if (!qset->in_sw_list)
qset_insert_in_sw_list(whc, qset);
- }
+ } else
+ usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
spin_unlock_irqrestore(&whc->lock, flags);
if (!err)
queue_work(whc->workqueue, &whc->periodic_work);
- return 0;
+ return err;
}
/**
@@ -353,7 +360,6 @@
qset_delete(whc, qset);
}
-
/**
* pzl_init - initialize the periodic zone list
* @whc: the WHCI host controller
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index 7be7431..640b38f 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -89,11 +89,16 @@
QH_INFO3_TX_RATE_53_3
| QH_INFO3_TX_PWR(0) /* 0 == max power */
);
+
+ qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
}
/**
* qset_clear - clear fields in a qset so it may be reinserted into a
- * schedule
+ * schedule.
+ *
+ * The sequence number and current window are not cleared (see
+ * qset_reset()).
*/
void qset_clear(struct whc *whc, struct whc_qset *qset)
{
@@ -101,9 +106,8 @@
qset->remove = 0;
qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T);
- qset->qh.status = cpu_to_le16(QH_STATUS_ICUR(qset->td_start));
+ qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK;
qset->qh.err_count = 0;
- qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
qset->qh.scratch[0] = 0;
qset->qh.scratch[1] = 0;
qset->qh.scratch[2] = 0;
@@ -114,6 +118,20 @@
}
/**
+ * qset_reset - reset endpoint state in a qset.
+ *
+ * Clears the sequence number and current window. This qset must not
+ * be in the ASL or PZL.
+ */
+void qset_reset(struct whc *whc, struct whc_qset *qset)
+{
+ wait_for_completion(&qset->remove_complete);
+
+ qset->qh.status &= ~QH_STATUS_SEQ_MASK;
+ qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
+}
+
+/**
* get_qset - get the qset for an async endpoint
*
* A new qset is created if one does not already exist.
diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h
index d3543a1..24e94d9 100644
--- a/drivers/usb/host/whci/whcd.h
+++ b/drivers/usb/host/whci/whcd.h
@@ -184,6 +184,7 @@
struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags);
void qset_delete(struct whc *whc, struct whc_qset *qset);
void qset_clear(struct whc *whc, struct whc_qset *qset);
+void qset_reset(struct whc *whc, struct whc_qset *qset);
int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb,
gfp_t mem_flags);
void qset_free_std(struct whc *whc, struct whc_std *std);
diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h
index 51df7e3..794dba0 100644
--- a/drivers/usb/host/whci/whci-hc.h
+++ b/drivers/usb/host/whci/whci-hc.h
@@ -185,6 +185,7 @@
#define QH_STATUS_FLOW_CTRL (1 << 15)
#define QH_STATUS_ICUR(i) ((i) << 5)
#define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7)
+#define QH_STATUS_SEQ_MASK 0x1f
/**
* usb_pipe_to_qh_type - USB core pipe type to QH transfer type
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 569ef0f..1976e9b 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -579,6 +579,7 @@
* trigger the "send a ZLP?" confusion.
*/
rndis = (maxpacket & 0x3f) == 0
+ && length > maxpacket
&& length < 0xffff
&& (length % maxpacket) != 0;
@@ -1228,27 +1229,7 @@
hw_ep = tx_ch->hw_ep;
- /* Peripheral role never repurposes the
- * endpoint, so immediate completion is
- * safe. Host role waits for the fifo
- * to empty (TXPKTRDY irq) before going
- * to the next queued bulk transfer.
- */
- if (is_host_active(cppi->musb)) {
-#if 0
- /* WORKAROUND because we may
- * not always get TXKPTRDY ...
- */
- int csr;
-
- csr = musb_readw(hw_ep->regs,
- MUSB_TXCSR);
- if (csr & MUSB_TXCSR_TXPKTRDY)
-#endif
- completed = false;
- }
- if (completed)
- musb_dma_completion(musb, index + 1, 1);
+ musb_dma_completion(musb, index + 1, 1);
} else {
/* Bigger transfer than we could fit in
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 338cd16..0112353 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2170,26 +2170,22 @@
return 0;
}
-static int musb_resume(struct platform_device *pdev)
+static int musb_resume_early(struct platform_device *pdev)
{
- unsigned long flags;
struct musb *musb = dev_to_musb(&pdev->dev);
if (!musb->clock)
return 0;
- spin_lock_irqsave(&musb->lock, flags);
-
if (musb->set_clock)
musb->set_clock(musb->clock, 1);
else
clk_enable(musb->clock);
/* for static cmos like DaVinci, register values were preserved
- * unless for some reason the whole soc powered down and we're
- * not treating that as a whole-system restart (e.g. swsusp)
+ * unless for some reason the whole soc powered down or the USB
+ * module got reset through the PSC (vs just being disabled).
*/
- spin_unlock_irqrestore(&musb->lock, flags);
return 0;
}
@@ -2207,7 +2203,7 @@
.remove = __devexit_p(musb_remove),
.shutdown = musb_shutdown,
.suspend = musb_suspend,
- .resume = musb_resume,
+ .resume_early = musb_resume_early,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index c7ebd08..f79440c 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -165,9 +165,15 @@
if (is_dma_capable() && ep->dma) {
struct dma_controller *c = ep->musb->dma_controller;
int value;
+
if (ep->is_in) {
+ /*
+ * The programming guide says that we must not clear
+ * the DMAMODE bit before DMAENAB, so we only
+ * clear it in the second write...
+ */
musb_writew(epio, MUSB_TXCSR,
- 0 | MUSB_TXCSR_FLUSHFIFO);
+ MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO);
musb_writew(epio, MUSB_TXCSR,
0 | MUSB_TXCSR_FLUSHFIFO);
} else {
@@ -230,7 +236,7 @@
| IN token(s) are recd from Host.
| -> DMA interrupt on completion
| calls TxAvail.
- | -> stop DMA, ~DmaEenab,
+ | -> stop DMA, ~DMAENAB,
| -> set TxPktRdy for last short pkt or zlp
| -> Complete Request
| -> Continue next request (call txstate)
@@ -315,9 +321,17 @@
request->dma, request_size);
if (use_dma) {
if (musb_ep->dma->desired_mode == 0) {
- /* ASSERT: DMAENAB is clear */
- csr &= ~(MUSB_TXCSR_AUTOSET |
- MUSB_TXCSR_DMAMODE);
+ /*
+ * We must not clear the DMAMODE bit
+ * before the DMAENAB bit -- and the
+ * latter doesn't always get cleared
+ * before we get here...
+ */
+ csr &= ~(MUSB_TXCSR_AUTOSET
+ | MUSB_TXCSR_DMAENAB);
+ musb_writew(epio, MUSB_TXCSR, csr
+ | MUSB_TXCSR_P_WZC_BITS);
+ csr &= ~MUSB_TXCSR_DMAMODE;
csr |= (MUSB_TXCSR_DMAENAB |
MUSB_TXCSR_MODE);
/* against programming guide */
@@ -334,10 +348,7 @@
#elif defined(CONFIG_USB_TI_CPPI_DMA)
/* program endpoint CSR first, then setup DMA */
- csr &= ~(MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_P_UNDERRUN
- | MUSB_TXCSR_TXPKTRDY);
+ csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB;
musb_writew(epio, MUSB_TXCSR,
(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
@@ -364,8 +375,8 @@
if (!use_dma) {
c->channel_release(musb_ep->dma);
musb_ep->dma = NULL;
- /* ASSERT: DMAENAB clear */
- csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+ csr &= ~MUSB_TXCSR_DMAENAB;
+ musb_writew(epio, MUSB_TXCSR, csr);
/* invariant: prequest->buf is non-null */
}
#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 499c431..db1b574 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -4,6 +4,7 @@
* Copyright 2005 Mentor Graphics Corporation
* Copyright (C) 2005-2006 by Texas Instruments
* Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -96,8 +97,8 @@
static void musb_ep_program(struct musb *musb, u8 epnum,
- struct urb *urb, unsigned int nOut,
- u8 *buf, u32 len);
+ struct urb *urb, int is_out,
+ u8 *buf, u32 offset, u32 len);
/*
* Clear TX fifo. Needed to avoid BABBLE errors.
@@ -125,6 +126,29 @@
}
}
+static void musb_h_ep0_flush_fifo(struct musb_hw_ep *ep)
+{
+ void __iomem *epio = ep->regs;
+ u16 csr;
+ int retries = 5;
+
+ /* scrub any data left in the fifo */
+ do {
+ csr = musb_readw(epio, MUSB_TXCSR);
+ if (!(csr & (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_RXPKTRDY)))
+ break;
+ musb_writew(epio, MUSB_TXCSR, MUSB_CSR0_FLUSHFIFO);
+ csr = musb_readw(epio, MUSB_TXCSR);
+ udelay(10);
+ } while (--retries);
+
+ WARN(!retries, "Could not flush host TX%d fifo: csr: %04x\n",
+ ep->epnum, csr);
+
+ /* and reset for the next transfer */
+ musb_writew(epio, MUSB_TXCSR, 0);
+}
+
/*
* Start transmit. Caller is responsible for locking shared resources.
* musb must be locked.
@@ -145,13 +169,15 @@
}
-static inline void cppi_host_txdma_start(struct musb_hw_ep *ep)
+static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep)
{
u16 txcsr;
/* NOTE: no locks here; caller should lock and select EP */
txcsr = musb_readw(ep->regs, MUSB_TXCSR);
txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS;
+ if (is_cppi_enabled())
+ txcsr |= MUSB_TXCSR_DMAMODE;
musb_writew(ep->regs, MUSB_TXCSR, txcsr);
}
@@ -166,9 +192,10 @@
{
u16 frame;
u32 len;
- void *buf;
void __iomem *mbase = musb->mregs;
struct urb *urb = next_urb(qh);
+ void *buf = urb->transfer_buffer;
+ u32 offset = 0;
struct musb_hw_ep *hw_ep = qh->hw_ep;
unsigned pipe = urb->pipe;
u8 address = usb_pipedevice(pipe);
@@ -191,7 +218,7 @@
case USB_ENDPOINT_XFER_ISOC:
qh->iso_idx = 0;
qh->frame = 0;
- buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset;
+ offset = urb->iso_frame_desc[0].offset;
len = urb->iso_frame_desc[0].length;
break;
default: /* bulk, interrupt */
@@ -209,14 +236,14 @@
case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break;
default: s = "-intr"; break;
}; s; }),
- epnum, buf, len);
+ epnum, buf + offset, len);
/* Configure endpoint */
if (is_in || hw_ep->is_shared_fifo)
hw_ep->in_qh = qh;
else
hw_ep->out_qh = qh;
- musb_ep_program(musb, epnum, urb, !is_in, buf, len);
+ musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len);
/* transmit may have more work: start it when it is time */
if (is_in)
@@ -227,7 +254,6 @@
case USB_ENDPOINT_XFER_ISOC:
case USB_ENDPOINT_XFER_INT:
DBG(3, "check whether there's still time for periodic Tx\n");
- qh->iso_idx = 0;
frame = musb_readw(mbase, MUSB_FRAME);
/* FIXME this doesn't implement that scheduling policy ...
* or handle framecounter wrapping
@@ -256,7 +282,7 @@
if (!hw_ep->tx_channel)
musb_h_tx_start(hw_ep);
else if (is_cppi_enabled() || tusb_dma_omap())
- cppi_host_txdma_start(hw_ep);
+ musb_h_tx_dma_start(hw_ep);
}
}
@@ -567,10 +593,17 @@
csr = musb_readw(ep->regs, MUSB_TXCSR);
if (csr & MUSB_TXCSR_MODE) {
musb_h_tx_flush_fifo(ep);
+ csr = musb_readw(ep->regs, MUSB_TXCSR);
musb_writew(ep->regs, MUSB_TXCSR,
- MUSB_TXCSR_FRCDATATOG);
+ csr | MUSB_TXCSR_FRCDATATOG);
}
- /* clear mode (and everything else) to enable Rx */
+
+ /*
+ * Clear the MODE bit (and everything else) to enable Rx.
+ * NOTE: we mustn't clear the DMAMODE bit before DMAENAB.
+ */
+ if (csr & MUSB_TXCSR_DMAMODE)
+ musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE);
musb_writew(ep->regs, MUSB_TXCSR, 0);
/* scrub all previous state, clearing toggle */
@@ -601,14 +634,68 @@
ep->rx_reinit = 0;
}
+static bool musb_tx_dma_program(struct dma_controller *dma,
+ struct musb_hw_ep *hw_ep, struct musb_qh *qh,
+ struct urb *urb, u32 offset, u32 length)
+{
+ struct dma_channel *channel = hw_ep->tx_channel;
+ void __iomem *epio = hw_ep->regs;
+ u16 pkt_size = qh->maxpacket;
+ u16 csr;
+ u8 mode;
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+ if (length > channel->max_len)
+ length = channel->max_len;
+
+ csr = musb_readw(epio, MUSB_TXCSR);
+ if (length > pkt_size) {
+ mode = 1;
+ csr |= MUSB_TXCSR_AUTOSET
+ | MUSB_TXCSR_DMAMODE
+ | MUSB_TXCSR_DMAENAB;
+ } else {
+ mode = 0;
+ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
+ csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */
+ }
+ channel->desired_mode = mode;
+ musb_writew(epio, MUSB_TXCSR, csr);
+#else
+ if (!is_cppi_enabled() && !tusb_dma_omap())
+ return false;
+
+ channel->actual_len = 0;
+
+ /*
+ * TX uses "RNDIS" mode automatically but needs help
+ * to identify the zero-length-final-packet case.
+ */
+ mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0;
+#endif
+
+ qh->segsize = length;
+
+ if (!dma->channel_program(channel, pkt_size, mode,
+ urb->transfer_dma + offset, length)) {
+ dma->channel_release(channel);
+ hw_ep->tx_channel = NULL;
+
+ csr = musb_readw(epio, MUSB_TXCSR);
+ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+ musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_H_WZC_BITS);
+ return false;
+ }
+ return true;
+}
/*
* Program an HDRC endpoint as per the given URB
* Context: irqs blocked, controller lock held
*/
static void musb_ep_program(struct musb *musb, u8 epnum,
- struct urb *urb, unsigned int is_out,
- u8 *buf, u32 len)
+ struct urb *urb, int is_out,
+ u8 *buf, u32 offset, u32 len)
{
struct dma_controller *dma_controller;
struct dma_channel *dma_channel;
@@ -667,12 +754,17 @@
/* general endpoint setup */
if (epnum) {
- /* ASSERT: TXCSR_DMAENAB was already cleared */
-
/* flush all old state, set default */
musb_h_tx_flush_fifo(hw_ep);
+
+ /*
+ * We must not clear the DMAMODE bit before or in
+ * the same cycle with the DMAENAB bit, so we clear
+ * the latter first...
+ */
csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
- | MUSB_TXCSR_DMAMODE
+ | MUSB_TXCSR_AUTOSET
+ | MUSB_TXCSR_DMAENAB
| MUSB_TXCSR_FRCDATATOG
| MUSB_TXCSR_H_RXSTALL
| MUSB_TXCSR_H_ERROR
@@ -680,24 +772,20 @@
);
csr |= MUSB_TXCSR_MODE;
- if (usb_gettoggle(urb->dev,
- qh->epnum, 1))
+ if (usb_gettoggle(urb->dev, qh->epnum, 1))
csr |= MUSB_TXCSR_H_WR_DATATOGGLE
| MUSB_TXCSR_H_DATATOGGLE;
else
csr |= MUSB_TXCSR_CLRDATATOG;
- /* twice in case of double packet buffering */
musb_writew(epio, MUSB_TXCSR, csr);
/* REVISIT may need to clear FLUSHFIFO ... */
+ csr &= ~MUSB_TXCSR_DMAMODE;
musb_writew(epio, MUSB_TXCSR, csr);
csr = musb_readw(epio, MUSB_TXCSR);
} else {
/* endpoint 0: just flush */
- musb_writew(epio, MUSB_CSR0,
- csr | MUSB_CSR0_FLUSHFIFO);
- musb_writew(epio, MUSB_CSR0,
- csr | MUSB_CSR0_FLUSHFIFO);
+ musb_h_ep0_flush_fifo(hw_ep);
}
/* target addr and (for multipoint) hub addr/port */
@@ -734,113 +822,14 @@
else
load_count = min((u32) packet_sz, len);
-#ifdef CONFIG_USB_INVENTRA_DMA
- if (dma_channel) {
-
- /* clear previous state */
- csr = musb_readw(epio, MUSB_TXCSR);
- csr &= ~(MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_DMAENAB);
- csr |= MUSB_TXCSR_MODE;
- musb_writew(epio, MUSB_TXCSR,
- csr | MUSB_TXCSR_MODE);
-
- qh->segsize = min(len, dma_channel->max_len);
-
- if (qh->segsize <= packet_sz)
- dma_channel->desired_mode = 0;
- else
- dma_channel->desired_mode = 1;
-
-
- if (dma_channel->desired_mode == 0) {
- csr &= ~(MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE);
- csr |= (MUSB_TXCSR_DMAENAB);
- /* against programming guide */
- } else
- csr |= (MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAENAB
- | MUSB_TXCSR_DMAMODE);
-
- musb_writew(epio, MUSB_TXCSR, csr);
-
- dma_ok = dma_controller->channel_program(
- dma_channel, packet_sz,
- dma_channel->desired_mode,
- urb->transfer_dma,
- qh->segsize);
- if (dma_ok) {
- load_count = 0;
- } else {
- dma_controller->channel_release(dma_channel);
- if (is_out)
- hw_ep->tx_channel = NULL;
- else
- hw_ep->rx_channel = NULL;
- dma_channel = NULL;
- }
- }
-#endif
-
- /* candidate for DMA */
- if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
-
- /* program endpoint CSRs first, then setup DMA.
- * assume CPPI setup succeeds.
- * defer enabling dma.
- */
- csr = musb_readw(epio, MUSB_TXCSR);
- csr &= ~(MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_DMAENAB);
- csr |= MUSB_TXCSR_MODE;
- musb_writew(epio, MUSB_TXCSR,
- csr | MUSB_TXCSR_MODE);
-
- dma_channel->actual_len = 0L;
- qh->segsize = len;
-
- /* TX uses "rndis" mode automatically, but needs help
- * to identify the zero-length-final-packet case.
- */
- dma_ok = dma_controller->channel_program(
- dma_channel, packet_sz,
- (urb->transfer_flags
- & URB_ZERO_PACKET)
- == URB_ZERO_PACKET,
- urb->transfer_dma,
- qh->segsize);
- if (dma_ok) {
- load_count = 0;
- } else {
- dma_controller->channel_release(dma_channel);
- hw_ep->tx_channel = NULL;
- dma_channel = NULL;
-
- /* REVISIT there's an error path here that
- * needs handling: can't do dma, but
- * there's no pio buffer address...
- */
- }
- }
+ if (dma_channel && musb_tx_dma_program(dma_controller,
+ hw_ep, qh, urb, offset, len))
+ load_count = 0;
if (load_count) {
- /* ASSERT: TXCSR_DMAENAB was already cleared */
-
/* PIO to load FIFO */
qh->segsize = load_count;
musb_write_fifo(hw_ep, load_count, buf);
- csr = musb_readw(epio, MUSB_TXCSR);
- csr &= ~(MUSB_TXCSR_DMAENAB
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_AUTOSET);
- /* write CSR */
- csr |= MUSB_TXCSR_MODE;
-
- if (epnum)
- musb_writew(epio, MUSB_TXCSR, csr);
}
/* re-enable interrupt */
@@ -895,7 +884,7 @@
dma_channel, packet_sz,
!(urb->transfer_flags
& URB_SHORT_NOT_OK),
- urb->transfer_dma,
+ urb->transfer_dma + offset,
qh->segsize);
if (!dma_ok) {
dma_controller->channel_release(
@@ -1063,11 +1052,7 @@
csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
musb_writew(epio, MUSB_CSR0, csr);
} else {
- csr |= MUSB_CSR0_FLUSHFIFO;
- musb_writew(epio, MUSB_CSR0, csr);
- musb_writew(epio, MUSB_CSR0, csr);
- csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
- musb_writew(epio, MUSB_CSR0, csr);
+ musb_h_ep0_flush_fifo(hw_ep);
}
musb_writeb(epio, MUSB_NAKLIMIT0, 0);
@@ -1081,10 +1066,7 @@
* SHOULD NEVER HAPPEN! */
ERR("no URB for end 0\n");
- musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
- musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
- musb_writew(epio, MUSB_CSR0, 0);
-
+ musb_h_ep0_flush_fifo(hw_ep);
goto done;
}
@@ -1145,8 +1127,8 @@
int pipe;
bool done = false;
u16 tx_csr;
- size_t wLength = 0;
- u8 *buf = NULL;
+ size_t length = 0;
+ size_t offset = 0;
struct urb *urb;
struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
@@ -1164,7 +1146,7 @@
/* with CPPI, DMA sometimes triggers "extra" irqs */
if (!urb) {
DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
- goto finish;
+ return;
}
pipe = urb->pipe;
@@ -1201,7 +1183,7 @@
musb_writew(epio, MUSB_TXCSR,
MUSB_TXCSR_H_WZC_BITS
| MUSB_TXCSR_TXPKTRDY);
- goto finish;
+ return;
}
if (status) {
@@ -1233,29 +1215,89 @@
/* second cppi case */
if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
- goto finish;
-
+ return;
}
- /* REVISIT this looks wrong... */
+ if (is_dma_capable() && dma && !status) {
+ /*
+ * DMA has completed. But if we're using DMA mode 1 (multi
+ * packet DMA), we need a terminal TXPKTRDY interrupt before
+ * we can consider this transfer completed, lest we trash
+ * its last packet when writing the next URB's data. So we
+ * switch back to mode 0 to get that interrupt; we'll come
+ * back here once it happens.
+ */
+ if (tx_csr & MUSB_TXCSR_DMAMODE) {
+ /*
+ * We shouldn't clear DMAMODE with DMAENAB set; so
+ * clear them in a safe order. That should be OK
+ * once TXPKTRDY has been set (and I've never seen
+ * it being 0 at this moment -- DMA interrupt latency
+ * is significant) but if it hasn't been then we have
+ * no choice but to stop being polite and ignore the
+ * programmer's guide... :-)
+ *
+ * Note that we must write TXCSR with TXPKTRDY cleared
+ * in order not to re-trigger the packet send (this bit
+ * can't be cleared by CPU), and there's another caveat:
+ * TXPKTRDY may be set shortly and then cleared in the
+ * double-buffered FIFO mode, so we do an extra TXCSR
+ * read for debouncing...
+ */
+ tx_csr &= musb_readw(epio, MUSB_TXCSR);
+ if (tx_csr & MUSB_TXCSR_TXPKTRDY) {
+ tx_csr &= ~(MUSB_TXCSR_DMAENAB |
+ MUSB_TXCSR_TXPKTRDY);
+ musb_writew(epio, MUSB_TXCSR,
+ tx_csr | MUSB_TXCSR_H_WZC_BITS);
+ }
+ tx_csr &= ~(MUSB_TXCSR_DMAMODE |
+ MUSB_TXCSR_TXPKTRDY);
+ musb_writew(epio, MUSB_TXCSR,
+ tx_csr | MUSB_TXCSR_H_WZC_BITS);
+
+ /*
+ * There is no guarantee that we'll get an interrupt
+ * after clearing DMAMODE as we might have done this
+ * too late (after TXPKTRDY was cleared by controller).
+ * Re-read TXCSR as we have spoiled its previous value.
+ */
+ tx_csr = musb_readw(epio, MUSB_TXCSR);
+ }
+
+ /*
+ * We may get here from a DMA completion or TXPKTRDY interrupt.
+ * In any case, we must check the FIFO status here and bail out
+ * only if the FIFO still has data -- that should prevent the
+ * "missed" TXPKTRDY interrupts and deal with double-buffered
+ * FIFO mode too...
+ */
+ if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) {
+ DBG(2, "DMA complete but packet still in FIFO, "
+ "CSR %04x\n", tx_csr);
+ return;
+ }
+ }
+
if (!status || dma || usb_pipeisoc(pipe)) {
if (dma)
- wLength = dma->actual_len;
+ length = dma->actual_len;
else
- wLength = qh->segsize;
- qh->offset += wLength;
+ length = qh->segsize;
+ qh->offset += length;
if (usb_pipeisoc(pipe)) {
struct usb_iso_packet_descriptor *d;
d = urb->iso_frame_desc + qh->iso_idx;
- d->actual_length = qh->segsize;
+ d->actual_length = length;
+ d->status = status;
if (++qh->iso_idx >= urb->number_of_packets) {
done = true;
} else {
d++;
- buf = urb->transfer_buffer + d->offset;
- wLength = d->length;
+ offset = d->offset;
+ length = d->length;
}
} else if (dma) {
done = true;
@@ -1268,10 +1310,8 @@
& URB_ZERO_PACKET))
done = true;
if (!done) {
- buf = urb->transfer_buffer
- + qh->offset;
- wLength = urb->transfer_buffer_length
- - qh->offset;
+ offset = qh->offset;
+ length = urb->transfer_buffer_length - offset;
}
}
}
@@ -1290,28 +1330,31 @@
urb->status = status;
urb->actual_length = qh->offset;
musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
+ return;
+ } else if (usb_pipeisoc(pipe) && dma) {
+ if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb,
+ offset, length))
+ return;
+ } else if (tx_csr & MUSB_TXCSR_DMAENAB) {
+ DBG(1, "not complete, but DMA enabled?\n");
+ return;
+ }
- } else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) {
- /* WARN_ON(!buf); */
+ /*
+ * PIO: start next packet in this URB.
+ *
+ * REVISIT: some docs say that when hw_ep->tx_double_buffered,
+ * (and presumably, FIFO is not half-full) we should write *two*
+ * packets before updating TXCSR; other docs disagree...
+ */
+ if (length > qh->maxpacket)
+ length = qh->maxpacket;
+ musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
+ qh->segsize = length;
- /* REVISIT: some docs say that when hw_ep->tx_double_buffered,
- * (and presumably, fifo is not half-full) we should write TWO
- * packets before updating TXCSR ... other docs disagree ...
- */
- /* PIO: start next packet in this URB */
- if (wLength > qh->maxpacket)
- wLength = qh->maxpacket;
- musb_write_fifo(hw_ep, wLength, buf);
- qh->segsize = wLength;
-
- musb_ep_select(mbase, epnum);
- musb_writew(epio, MUSB_TXCSR,
- MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
- } else
- DBG(1, "not complete, but dma enabled?\n");
-
-finish:
- return;
+ musb_ep_select(mbase, epnum);
+ musb_writew(epio, MUSB_TXCSR,
+ MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
}
@@ -1841,7 +1884,7 @@
unsigned long flags;
struct musb *musb = hcd_to_musb(hcd);
struct usb_host_endpoint *hep = urb->ep;
- struct musb_qh *qh = hep->hcpriv;
+ struct musb_qh *qh;
struct usb_endpoint_descriptor *epd = &hep->desc;
int ret;
unsigned type_reg;
@@ -1853,22 +1896,21 @@
spin_lock_irqsave(&musb->lock, flags);
ret = usb_hcd_link_urb_to_ep(hcd, urb);
+ qh = ret ? NULL : hep->hcpriv;
+ if (qh)
+ urb->hcpriv = qh;
spin_unlock_irqrestore(&musb->lock, flags);
- if (ret)
- return ret;
/* DMA mapping was already done, if needed, and this urb is on
- * hep->urb_list ... so there's little to do unless hep wasn't
- * yet scheduled onto a live qh.
+ * hep->urb_list now ... so we're done, unless hep wasn't yet
+ * scheduled onto a live qh.
*
* REVISIT best to keep hep->hcpriv valid until the endpoint gets
* disabled, testing for empty qh->ring and avoiding qh setup costs
* except for the first urb queued after a config change.
*/
- if (qh) {
- urb->hcpriv = qh;
- return 0;
- }
+ if (qh || ret)
+ return ret;
/* Allocate and initialize qh, minimizing the work done each time
* hw_ep gets reprogrammed, or with irqs blocked. Then schedule it.
@@ -2044,7 +2086,7 @@
* endpoint's irq status here to avoid bogus irqs.
* clearing that status is platform-specific...
*/
- } else {
+ } else if (ep->epnum) {
musb_h_tx_flush_fifo(ep);
csr = musb_readw(epio, MUSB_TXCSR);
csr &= ~(MUSB_TXCSR_AUTOSET
@@ -2058,6 +2100,8 @@
musb_writew(epio, MUSB_TXCSR, csr);
/* flush cpu writebuffer */
csr = musb_readw(epio, MUSB_TXCSR);
+ } else {
+ musb_h_ep0_flush_fifo(ep);
}
if (status == 0)
musb_advance_schedule(ep->musb, urb, ep, is_in);
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 8662e9e..5e83f96 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -195,30 +195,32 @@
void __iomem *mbase = musb_channel->controller->base;
u8 bchannel = musb_channel->idx;
+ int offset;
u16 csr;
if (channel->status == MUSB_DMA_STATUS_BUSY) {
if (musb_channel->transmit) {
+ offset = MUSB_EP_OFFSET(musb_channel->epnum,
+ MUSB_TXCSR);
- csr = musb_readw(mbase,
- MUSB_EP_OFFSET(musb_channel->epnum,
- MUSB_TXCSR));
- csr &= ~(MUSB_TXCSR_AUTOSET |
- MUSB_TXCSR_DMAENAB |
- MUSB_TXCSR_DMAMODE);
- musb_writew(mbase,
- MUSB_EP_OFFSET(musb_channel->epnum, MUSB_TXCSR),
- csr);
+ /*
+ * The programming guide says that we must clear
+ * the DMAENAB bit before the DMAMODE bit...
+ */
+ csr = musb_readw(mbase, offset);
+ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+ musb_writew(mbase, offset, csr);
+ csr &= ~MUSB_TXCSR_DMAMODE;
+ musb_writew(mbase, offset, csr);
} else {
- csr = musb_readw(mbase,
- MUSB_EP_OFFSET(musb_channel->epnum,
- MUSB_RXCSR));
+ offset = MUSB_EP_OFFSET(musb_channel->epnum,
+ MUSB_RXCSR);
+
+ csr = musb_readw(mbase, offset);
csr &= ~(MUSB_RXCSR_AUTOCLEAR |
MUSB_RXCSR_DMAENAB |
MUSB_RXCSR_DMAMODE);
- musb_writew(mbase,
- MUSB_EP_OFFSET(musb_channel->epnum, MUSB_RXCSR),
- csr);
+ musb_writew(mbase, offset, csr);
}
musb_writew(mbase,
@@ -296,20 +298,28 @@
&& ((channel->desired_mode == 0)
|| (channel->actual_len &
(musb_channel->max_packet_sz - 1)))
- ) {
+ ) {
+ u8 epnum = musb_channel->epnum;
+ int offset = MUSB_EP_OFFSET(epnum,
+ MUSB_TXCSR);
+ u16 txcsr;
+
+ /*
+ * The programming guide says that we
+ * must clear DMAENAB before DMAMODE.
+ */
+ musb_ep_select(mbase, epnum);
+ txcsr = musb_readw(mbase, offset);
+ txcsr &= ~(MUSB_TXCSR_DMAENAB
+ | MUSB_TXCSR_AUTOSET);
+ musb_writew(mbase, offset, txcsr);
/* Send out the packet */
- musb_ep_select(mbase,
- musb_channel->epnum);
- musb_writew(mbase, MUSB_EP_OFFSET(
- musb_channel->epnum,
- MUSB_TXCSR),
- MUSB_TXCSR_TXPKTRDY);
- } else {
- musb_dma_completion(
- musb,
- musb_channel->epnum,
- musb_channel->transmit);
+ txcsr &= ~MUSB_TXCSR_DMAMODE;
+ txcsr |= MUSB_TXCSR_TXPKTRDY;
+ musb_writew(mbase, offset, txcsr);
}
+ musb_dma_completion(musb, musb_channel->epnum,
+ musb_channel->transmit);
}
}
}
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index 4b933f6..c567168 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -36,14 +36,14 @@
struct device *dev;
};
-static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
static struct platform_device nop_xceiv_device = {
.name = "nop_usb_xceiv",
.id = -1,
.dev = {
.dma_mask = &nop_xceiv_dmamask,
- .coherent_dma_mask = DMA_32BIT_MASK,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = NULL,
},
};
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index dcc87aa..8100f1d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -668,6 +668,7 @@
{ USB_DEVICE(DE_VID, WHT_PID) },
{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index daaf63d..c09f658 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -913,6 +913,13 @@
#define ADI_GNICE_PID 0xF000
/*
+ * JETI SPECTROMETER SPECBOS 1201
+ * http://www.jeti.com/products/sys/scb/scb1201.php
+ */
+#define JETI_VID 0x0c6c
+#define JETI_SPC1201_PID 0x04b2
+
+/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
* wValue: 0
diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
index 2e8e0546..b66b71c 100644
--- a/drivers/usb/serial/moto_modem.c
+++ b/drivers/usb/serial/moto_modem.c
@@ -25,6 +25,7 @@
{ USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */
{ USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */
{ USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */
+ { USB_DEVICE(0x22b8, 0x2c64) }, /* Motorola V950 phone */
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index d560c0b..47bd070 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -300,6 +300,10 @@
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
+#define DLINK_VENDOR_ID 0x1186
+#define DLINK_PRODUCT_DWM_652 0x3e04
+
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -516,6 +520,7 @@
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
+ { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index e6d6b0c..7528b8d 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -26,6 +26,27 @@
{USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
{USB_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
{USB_DEVICE(0x03f0, 0x201d)}, /* HP un2400 Gobi QDL Device */
+ {USB_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
+ {USB_DEVICE(0x04da, 0x250c)}, /* Panasonic Gobi QDL device */
+ {USB_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
+ {USB_DEVICE(0x413c, 0x8171)}, /* Dell Gobi QDL device */
+ {USB_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
+ {USB_DEVICE(0x1410, 0xa008)}, /* Novatel Gobi QDL device */
+ {USB_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
+ {USB_DEVICE(0x0b05, 0x1774)}, /* Asus Gobi QDL device */
+ {USB_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
+ {USB_DEVICE(0x19d2, 0xfff2)}, /* ONDA Gobi QDL device */
+ {USB_DEVICE(0x1557, 0x0a80)}, /* OQO Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9008)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9201)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9221)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9231)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 2620bf6..9c4c700 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1215,20 +1215,22 @@
}
tty = tty_port_tty_get(&port->port);
- if (tty && urb->actual_length) {
- usb_serial_debug_data(debug, dev, __func__,
- urb->actual_length, urb->transfer_buffer);
+ if (tty) {
+ if (urb->actual_length) {
+ usb_serial_debug_data(debug, dev, __func__,
+ urb->actual_length, urb->transfer_buffer);
- if (!tport->tp_is_open)
- dbg("%s - port closed, dropping data", __func__);
- else
- ti_recv(&urb->dev->dev, tty,
+ if (!tport->tp_is_open)
+ dbg("%s - port closed, dropping data",
+ __func__);
+ else
+ ti_recv(&urb->dev->dev, tty,
urb->transfer_buffer,
urb->actual_length);
-
- spin_lock(&tport->tp_lock);
- tport->tp_icount.rx += urb->actual_length;
- spin_unlock(&tport->tp_lock);
+ spin_lock(&tport->tp_lock);
+ tport->tp_icount.rx += urb->actual_length;
+ spin_unlock(&tport->tp_lock);
+ }
tty_kref_put(tty);
}
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 5be54c0..ef7e5a8 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -17,7 +17,8 @@
ifeq ($(CONFIG_USB_LIBUSUAL),)
usb-storage-objs += usual-tables.o
else
- obj-$(CONFIG_USB) += libusual.o usual-tables.o
+ obj-$(CONFIG_USB) += usb-libusual.o
+ usb-libusual-objs := libusual.o usual-tables.o
endif
obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 49aedb3..fcb3202 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -247,10 +247,8 @@
USB_ENDPOINT_HALT, endp,
NULL, 0, 3*HZ);
- /* reset the endpoint toggle */
if (result >= 0)
- usb_settoggle(us->pusb_dev, usb_pipeendpoint(pipe),
- usb_pipeout(pipe), 0);
+ usb_reset_endpoint(us->pusb_dev, endp);
US_DEBUGP("%s: result = %d\n", __func__, result);
return result;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1c1f643..96db479 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -975,12 +975,14 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
-/* Reported by Rauch Wolke <rauchwolke@gmx.net> */
+/* Reported by Rauch Wolke <rauchwolke@gmx.net>
+ * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882)
+ */
UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff,
"Simple Tech/Datafab",
"CF+SM Reader",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
+ US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ),
/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
* to the USB storage specification in two ways:
@@ -1376,6 +1378,14 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
0),
+/* Reported by Pascal Terjan <pterjan@mandriva.com>
+ * Ignore driver CD mode and force into modem mode by default.
+ */
+UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000,
+ "D-Link",
+ "USB Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0),
+
/* Reported by Kevin Lloyd <linux@sierrawireless.com>
* Entry is needed for the initializer function override,
* which instructs the device to load as a modem
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 386eaa2..4ac4300 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -267,6 +267,8 @@
mutex_lock(&wusbhc->mutex);
wusbhc_devconnect_acked(wusbhc, wusb_dev);
mutex_unlock(&wusbhc->mutex);
+
+ wusb_dev_put(wusb_dev);
}
/*
@@ -396,7 +398,8 @@
/* After a device disconnects, change the GTK (see [WUSB]
* section 6.2.11.2). */
- wusbhc_gtk_rekey(wusbhc);
+ if (wusbhc->active)
+ wusbhc_gtk_rekey(wusbhc);
/* The Wireless USB part has forgotten about the device already; now
* khubd's timer will pick up the disconnection and remove the USB
@@ -1084,15 +1087,21 @@
* wusbhc_devconnect_stop - stop managing connected devices
* @wusbhc: the WUSB HC
*
- * Removes the Host Info IE and stops the keep alives.
- *
- * FIXME: should this disconnect all devices?
+ * Disconnects any devices still connected, stops the keep alives and
+ * removes the Host Info IE.
*/
void wusbhc_devconnect_stop(struct wusbhc *wusbhc)
{
- cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
- WARN_ON(!list_empty(&wusbhc->cack_list));
+ int i;
+ mutex_lock(&wusbhc->mutex);
+ for (i = 0; i < wusbhc->ports_max; i++) {
+ if (wusbhc->port[i].wusb_dev)
+ __wusbhc_dev_disconnect(wusbhc, &wusbhc->port[i]);
+ }
+ mutex_unlock(&wusbhc->mutex);
+
+ cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr);
kfree(wusbhc->wuie_host_info);
wusbhc->wuie_host_info = NULL;
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
index 07c63a3..ee6256f 100644
--- a/drivers/usb/wusbcore/wusbhc.c
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -88,33 +88,31 @@
wusb_trust_timeout_store);
/*
- * Show & store the current WUSB CHID
+ * Show the current WUSB CHID.
*/
static ssize_t wusb_chid_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+ const struct wusb_ckhdid *chid;
ssize_t result = 0;
if (wusbhc->wuie_host_info != NULL)
- result += ckhdid_printf(buf, PAGE_SIZE,
- &wusbhc->wuie_host_info->CHID);
+ chid = &wusbhc->wuie_host_info->CHID;
+ else
+ chid = &wusb_ckhdid_zero;
+
+ result += ckhdid_printf(buf, PAGE_SIZE, chid);
+ result += sprintf(buf + result, "\n");
+
return result;
}
/*
- * Store a new CHID
+ * Store a new CHID.
*
- * This will (FIXME) trigger many changes.
- *
- * - Send an all zeros CHID and it will stop the controller
- * - Send a non-zero CHID and it will start it
- * (unless it was started, it will just change the CHID,
- * diconnecting all devices first).
- *
- * So first we scan the MMC we are sent and then we act on it. We
- * read it in the same format as we print it, an ASCII string of 16
- * hex bytes.
+ * - Write an all zeros CHID and it will stop the controller
+ * - Write a non-zero CHID and it will start it.
*
* See wusbhc_chid_set() for more info.
*/
@@ -339,13 +337,15 @@
{
struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
- if (status == 0) {
+ if (status == 0 && wusb_dev) {
wusb_dev->entry_ts = jiffies;
- /* wusbhc_devconnect_acked() can't be called from from
+ /* wusbhc_devconnect_acked() can't be called from
atomic context so defer it to a work queue. */
if (!list_empty(&wusb_dev->cack_node))
queue_work(wusbd, &wusb_dev->devconnect_acked_work);
+ else
+ wusb_dev_put(wusb_dev);
}
usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status);
diff --git a/drivers/video/asiliantfb.c b/drivers/video/asiliantfb.c
index 1a1f946..9fe90ce9 100644
--- a/drivers/video/asiliantfb.c
+++ b/drivers/video/asiliantfb.c
@@ -533,6 +533,7 @@
writeb(0xff, mmio_base + 0x78c);
chips_hw_init(p);
+ return 0;
}
static int __devinit
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 16bb7e3..6c37e8e 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -698,8 +698,8 @@
found:
/*
* Some methods fail to retrieve SCLK and MCLK values, we apply default
- * settings in this case (200Mhz). If that really happne often, we could
- * fetch from registers instead...
+ * settings in this case (200Mhz). If that really happens often, we
+ * could fetch from registers instead...
*/
if (rinfo->pll.mclk == 0)
rinfo->pll.mclk = 20000;
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index dd37cbc..157057c 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -35,8 +35,6 @@
return 0;
bd = container_of(self, struct backlight_device, fb_notif);
- if (!lock_fb_info(evdata->info))
- return -ENODEV;
mutex_lock(&bd->ops_lock);
if (bd->ops)
if (!bd->ops->check_fb ||
@@ -49,7 +47,6 @@
backlight_update_status(bd);
}
mutex_unlock(&bd->ops_lock);
- unlock_fb_info(evdata->info);
return 0;
}
diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c
index 0bb13df..b644947 100644
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@@ -40,8 +40,6 @@
if (!ld->ops)
return 0;
- if (!lock_fb_info(evdata->info))
- return -ENODEV;
mutex_lock(&ld->ops_lock);
if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) {
if (event == FB_EVENT_BLANK) {
@@ -53,7 +51,6 @@
}
}
mutex_unlock(&ld->ops_lock);
- unlock_fb_info(evdata->info);
return 0;
}
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index d42e385..4c2bf92 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -567,9 +567,7 @@
default:
dev_dbg(info->device,
"Unsupported bpp size: %d\n", var->bits_per_pixel);
- assert(false);
- /* should never occur */
- break;
+ return -EINVAL;
}
if (var->xres_virtual < var->xres)
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 2cd500a..471a9a6 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -2263,9 +2263,12 @@
}
+ if (!lock_fb_info(info))
+ return;
event.info = info;
event.data = ␣
fb_notifier_call_chain(FB_EVENT_CONBLANK, &event);
+ unlock_fb_info(info);
}
static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch)
@@ -2956,8 +2959,6 @@
{
int i, idx;
- if (!lock_fb_info(info))
- return -ENODEV;
idx = info->node;
for (i = first_fb_vc; i <= last_fb_vc; i++) {
if (con2fb_map[i] == idx)
@@ -2985,8 +2986,6 @@
if (primary_device == idx)
primary_device = -1;
- unlock_fb_info(info);
-
if (!num_registered_fb)
unregister_con_driver(&fb_con);
@@ -3027,11 +3026,8 @@
{
int ret = 0, i, idx;
- if (!lock_fb_info(info))
- return -ENODEV;
idx = info->node;
fbcon_select_primary(info);
- unlock_fb_info(info);
if (info_idx == -1) {
for (i = first_fb_vc; i <= last_fb_vc; i++) {
@@ -3152,53 +3148,23 @@
switch(action) {
case FB_EVENT_SUSPEND:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_suspended(info);
- unlock_fb_info(info);
break;
case FB_EVENT_RESUME:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_resumed(info);
- unlock_fb_info(info);
break;
case FB_EVENT_MODE_CHANGE:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_modechanged(info);
- unlock_fb_info(info);
break;
case FB_EVENT_MODE_CHANGE_ALL:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_set_all_vcs(info);
- unlock_fb_info(info);
break;
case FB_EVENT_MODE_DELETE:
mode = event->data;
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
ret = fbcon_mode_deleted(info, mode);
- unlock_fb_info(info);
break;
case FB_EVENT_FB_UNBIND:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
idx = info->node;
- unlock_fb_info(info);
ret = fbcon_fb_unbind(idx);
break;
case FB_EVENT_FB_REGISTERED:
@@ -3217,29 +3183,14 @@
con2fb->framebuffer = con2fb_map[con2fb->console - 1];
break;
case FB_EVENT_BLANK:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_fb_blanked(info, *(int *)event->data);
- unlock_fb_info(info);
break;
case FB_EVENT_NEW_MODELIST:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_new_modelist(info);
- unlock_fb_info(info);
break;
case FB_EVENT_GET_REQ:
caps = event->data;
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_get_requirement(info, caps);
- unlock_fb_info(info);
break;
}
done:
diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c
index 0c5b9a9..8dea2bc 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -210,12 +210,15 @@
unsigned int size_total;
int request_succeeded = 0;
- printk(KERN_INFO "efifb: probing for efifb\n");
-
if (!screen_info.lfb_depth)
screen_info.lfb_depth = 32;
if (!screen_info.pages)
screen_info.pages = 1;
+ if (!screen_info.lfb_base) {
+ printk(KERN_DEBUG "efifb: invalid framebuffer address\n");
+ return -ENODEV;
+ }
+ printk(KERN_INFO "efifb: probing for efifb\n");
/* just assume they're all unset if any are */
if (!screen_info.blue_size) {
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 2ac32e6..d412a1d 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1097,8 +1097,11 @@
return -EINVAL;
con2fb.framebuffer = -1;
event.data = &con2fb;
+ if (!lock_fb_info(info))
+ return -ENODEV;
event.info = info;
fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP, &event);
+ unlock_fb_info(info);
ret = copy_to_user(argp, &con2fb, sizeof(con2fb)) ? -EFAULT : 0;
break;
case FBIOPUT_CON2FBMAP:
@@ -1115,8 +1118,11 @@
break;
}
event.data = &con2fb;
+ if (!lock_fb_info(info))
+ return -ENODEV;
event.info = info;
ret = fb_notifier_call_chain(FB_EVENT_SET_CONSOLE_MAP, &event);
+ unlock_fb_info(info);
break;
case FBIOBLANK:
if (!lock_fb_info(info))
@@ -1521,7 +1527,10 @@
registered_fb[i] = fb_info;
event.info = fb_info;
+ if (!lock_fb_info(fb_info))
+ return -ENODEV;
fb_notifier_call_chain(FB_EVENT_FB_REGISTERED, &event);
+ unlock_fb_info(fb_info);
return 0;
}
@@ -1555,8 +1564,12 @@
goto done;
}
+
+ if (!lock_fb_info(fb_info))
+ return -ENODEV;
event.info = fb_info;
ret = fb_notifier_call_chain(FB_EVENT_FB_UNBIND, &event);
+ unlock_fb_info(fb_info);
if (ret) {
ret = -EINVAL;
@@ -1590,6 +1603,8 @@
{
struct fb_event event;
+ if (!lock_fb_info(info))
+ return;
event.info = info;
if (state) {
fb_notifier_call_chain(FB_EVENT_SUSPEND, &event);
@@ -1598,6 +1613,7 @@
info->state = FBINFO_STATE_RUNNING;
fb_notifier_call_chain(FB_EVENT_RESUME, &event);
}
+ unlock_fb_info(info);
}
/**
@@ -1667,8 +1683,11 @@
err = 1;
if (!list_empty(&info->modelist)) {
+ if (!lock_fb_info(info))
+ return -ENODEV;
event.info = info;
err = fb_notifier_call_chain(FB_EVENT_NEW_MODELIST, &event);
+ unlock_fb_info(info);
}
return err;
diff --git a/drivers/video/intelfb/intelfb.h b/drivers/video/intelfb/intelfb.h
index a50bea6..4098455 100644
--- a/drivers/video/intelfb/intelfb.h
+++ b/drivers/video/intelfb/intelfb.h
@@ -53,6 +53,7 @@
#define PCI_DEVICE_ID_INTEL_830M 0x3577
#define PCI_DEVICE_ID_INTEL_845G 0x2562
#define PCI_DEVICE_ID_INTEL_85XGM 0x3582
+#define PCI_DEVICE_ID_INTEL_854 0x358E
#define PCI_DEVICE_ID_INTEL_865G 0x2572
#define PCI_DEVICE_ID_INTEL_915G 0x2582
#define PCI_DEVICE_ID_INTEL_915GM 0x2592
@@ -154,6 +155,7 @@
INTEL_85XGM,
INTEL_852GM,
INTEL_852GME,
+ INTEL_854,
INTEL_855GM,
INTEL_855GME,
INTEL_865G,
diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c
index b306549..487f2be 100644
--- a/drivers/video/intelfb/intelfb_i2c.c
+++ b/drivers/video/intelfb/intelfb_i2c.c
@@ -156,6 +156,7 @@
switch(dinfo->chipset) {
case INTEL_830M:
case INTEL_845G:
+ case INTEL_854:
case INTEL_855GM:
case INTEL_865G:
dinfo->output[i].type = INTELFB_OUTPUT_DVO;
diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c
index 6d8e541..ace14fe 100644
--- a/drivers/video/intelfb/intelfbdrv.c
+++ b/drivers/video/intelfb/intelfbdrv.c
@@ -182,6 +182,7 @@
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_845G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_845G },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_85XGM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_85XGM },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_865G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_865G },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_854, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_854 },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915G },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915GM },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945G },
diff --git a/drivers/video/intelfb/intelfbhw.c b/drivers/video/intelfb/intelfbhw.c
index 8b26b27..0689f97 100644
--- a/drivers/video/intelfb/intelfbhw.c
+++ b/drivers/video/intelfb/intelfbhw.c
@@ -84,6 +84,11 @@
dinfo->mobile = 0;
dinfo->pll_index = PLLS_I8xx;
return 0;
+ case PCI_DEVICE_ID_INTEL_854:
+ dinfo->mobile = 1;
+ dinfo->name = "Intel(R) 854";
+ dinfo->chipset = INTEL_854;
+ return 0;
case PCI_DEVICE_ID_INTEL_85XGM:
tmp = 0;
dinfo->mobile = 1;
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 84f63205..0889d50 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1439,7 +1439,7 @@
static irqreturn_t pxafb_handle_irq(int irq, void *dev_id)
{
struct pxafb_info *fbi = dev_id;
- unsigned int lccr0, lcsr, lcsr1;
+ unsigned int lccr0, lcsr;
lcsr = lcd_readl(fbi, LCSR);
if (lcsr & LCSR_LDD) {
@@ -1455,14 +1455,16 @@
lcd_writel(fbi, LCSR, lcsr);
#ifdef CONFIG_FB_PXA_OVERLAY
- lcsr1 = lcd_readl(fbi, LCSR1);
- if (lcsr1 & LCSR1_BS(1))
- complete(&fbi->overlay[0].branch_done);
+ {
+ unsigned int lcsr1 = lcd_readl(fbi, LCSR1);
+ if (lcsr1 & LCSR1_BS(1))
+ complete(&fbi->overlay[0].branch_done);
- if (lcsr1 & LCSR1_BS(2))
- complete(&fbi->overlay[1].branch_done);
+ if (lcsr1 & LCSR1_BS(2))
+ complete(&fbi->overlay[1].branch_done);
- lcd_writel(fbi, LCSR1, lcsr1);
+ lcd_writel(fbi, LCSR1, lcsr1);
+ }
#endif
return IRQ_HANDLED;
}
diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c
index 4dcec48..c3fad34 100644
--- a/drivers/video/s3fb.c
+++ b/drivers/video/s3fb.c
@@ -45,11 +45,11 @@
static const struct svga_fb_format s3fb_formats[] = {
{ 0, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
FB_TYPE_TEXT, FB_AUX_TEXT_SVGA_STEP4, FB_VISUAL_PSEUDOCOLOR, 8, 16},
- { 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
+ { 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 8, 16},
- { 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 1,
+ { 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 1,
FB_TYPE_INTERLEAVED_PLANES, 1, FB_VISUAL_PSEUDOCOLOR, 8, 16},
- { 8, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
+ { 8, {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 4, 8},
{16, {10, 5, 0}, {5, 5, 0}, {0, 5, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4},
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index fad58cf..10ddad8 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -199,16 +199,20 @@
extern void (*sa1100fb_backlight_power)(int on);
extern void (*sa1100fb_lcd_power)(int on);
-/*
- * IMHO this looks wrong. In 8BPP, length should be 8.
- */
-static struct sa1100fb_rgb rgb_8 = {
+static struct sa1100fb_rgb rgb_4 = {
.red = { .offset = 0, .length = 4, },
.green = { .offset = 0, .length = 4, },
.blue = { .offset = 0, .length = 4, },
.transp = { .offset = 0, .length = 0, },
};
+static struct sa1100fb_rgb rgb_8 = {
+ .red = { .offset = 0, .length = 8, },
+ .green = { .offset = 0, .length = 8, },
+ .blue = { .offset = 0, .length = 8, },
+ .transp = { .offset = 0, .length = 0, },
+};
+
static struct sa1100fb_rgb def_rgb_16 = {
.red = { .offset = 11, .length = 5, },
.green = { .offset = 5, .length = 6, },
@@ -613,7 +617,7 @@
DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel);
switch (var->bits_per_pixel) {
case 4:
- rgbidx = RGB_8;
+ rgbidx = RGB_4;
break;
case 8:
rgbidx = RGB_8;
@@ -1382,6 +1386,7 @@
fbi->fb.monspecs = monspecs;
fbi->fb.pseudo_palette = (fbi + 1);
+ fbi->rgb[RGB_4] = &rgb_4;
fbi->rgb[RGB_8] = &rgb_8;
fbi->rgb[RGB_16] = &def_rgb_16;
diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h
index 86831db..1c3b459 100644
--- a/drivers/video/sa1100fb.h
+++ b/drivers/video/sa1100fb.h
@@ -57,9 +57,10 @@
unsigned long lccr3;
};
-#define RGB_8 (0)
-#define RGB_16 (1)
-#define NR_RGB 2
+#define RGB_4 (0)
+#define RGB_8 (1)
+#define RGB_16 (2)
+#define NR_RGB 3
struct sa1100fb_info {
struct fb_info fb;
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 346d645..7e17ee9 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -1129,7 +1129,7 @@
switch(var->bits_per_pixel) {
case 8:
var->red.offset = var->green.offset = var->blue.offset = 0;
- var->red.length = var->green.length = var->blue.length = 6;
+ var->red.length = var->green.length = var->blue.length = 8;
break;
case 16:
var->red.offset = 11;
diff --git a/drivers/video/skeletonfb.c b/drivers/video/skeletonfb.c
index a439159..89158bc 100644
--- a/drivers/video/skeletonfb.c
+++ b/drivers/video/skeletonfb.c
@@ -308,9 +308,11 @@
* color depth = SUM(var->{color}.length)
*
* Pseudocolor:
- * var->{color}.offset is 0
- * var->{color}.length contains width of DAC or the number of unique
- * colors available (color depth)
+ * var->{color}.offset is 0 unless the palette index takes less than
+ * bits_per_pixel bits and is stored in the upper
+ * bits of the pixel value
+ * var->{color}.length is set so that 1 << length is the number of
+ * available palette entries
* pseudo_palette is not used
* RAMDAC[X] is programmed to (red, green, blue)
* color depth = var->{color}.length
diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index 0b370ae..421770b 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -55,6 +55,7 @@
static u16 maxhf __devinitdata; /* maximum horizontal frequency */
static u16 vbemode __devinitdata; /* force use of a specific VBE mode */
static char *mode_option __devinitdata;
+static u8 dac_width = 6;
static struct uvesafb_ktask *uvfb_tasks[UVESAFB_TASKS_MAX];
static DEFINE_MUTEX(uvfb_lock);
@@ -303,22 +304,10 @@
var->blue.offset = 0;
var->transp.offset = 0;
- /*
- * We're assuming that we can switch the DAC to 8 bits. If
- * this proves to be incorrect, we'll update the fields
- * later in set_par().
- */
- if (par->vbe_ib.capabilities & VBE_CAP_CAN_SWITCH_DAC) {
- var->red.length = 8;
- var->green.length = 8;
- var->blue.length = 8;
- var->transp.length = 0;
- } else {
- var->red.length = 6;
- var->green.length = 6;
- var->blue.length = 6;
- var->transp.length = 0;
- }
+ var->red.length = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ var->transp.length = 0;
}
}
@@ -1006,7 +995,7 @@
struct fb_info *info)
{
struct uvesafb_pal_entry entry;
- int shift = 16 - info->var.green.length;
+ int shift = 16 - dac_width;
int err = 0;
if (regno >= info->cmap.len)
@@ -1055,7 +1044,7 @@
static int uvesafb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
{
struct uvesafb_pal_entry *entries;
- int shift = 16 - info->var.green.length;
+ int shift = 16 - dac_width;
int i, err = 0;
if (info->var.bits_per_pixel == 8) {
@@ -1317,13 +1306,9 @@
err = uvesafb_exec(task);
if (err || (task->t.regs.eax & 0xffff) != 0x004f ||
((task->t.regs.ebx & 0xff00) >> 8) != 8) {
- /*
- * We've failed to set the DAC palette format -
- * time to correct var.
- */
- info->var.red.length = 6;
- info->var.green.length = 6;
- info->var.blue.length = 6;
+ dac_width = 6;
+ } else {
+ dac_width = 8;
}
}
diff --git a/drivers/video/vfb.c b/drivers/video/vfb.c
index cc919ae..050d432 100644
--- a/drivers/video/vfb.c
+++ b/drivers/video/vfb.c
@@ -318,13 +318,16 @@
* {hardwarespecific} contains width of RAMDAC
* cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset)
* RAMDAC[X] is programmed to (red, green, blue)
- *
+ *
* Pseudocolor:
- * uses offset = 0 && length = RAMDAC register width.
- * var->{color}.offset is 0
- * var->{color}.length contains widht of DAC
+ * var->{color}.offset is 0 unless the palette index takes less than
+ * bits_per_pixel bits and is stored in the upper
+ * bits of the pixel value
+ * var->{color}.length is set so that 1 << length is the number of available
+ * palette entries
* cmap is not used
* RAMDAC[X] is programmed to (red, green, blue)
+ *
* Truecolor:
* does not use DAC. Usually 3 are present.
* var->{color}.offset contains start of bitfield
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 5926826..9c76a06 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -190,7 +190,8 @@
try_to_freeze();
wait_event_interruptible(vb->config_change,
(diff = towards_target(vb)) != 0
- || kthread_should_stop());
+ || kthread_should_stop()
+ || freezing(current));
if (diff > 0)
fill_balloon(vb, diff);
else if (diff < 0)
diff --git a/drivers/xen/cpu_hotplug.c b/drivers/xen/cpu_hotplug.c
index 5f54c01..bdfd584 100644
--- a/drivers/xen/cpu_hotplug.c
+++ b/drivers/xen/cpu_hotplug.c
@@ -21,29 +21,41 @@
set_cpu_present(cpu, false);
}
-static void vcpu_hotplug(unsigned int cpu)
+static int vcpu_online(unsigned int cpu)
{
int err;
char dir[32], state[32];
- if (!cpu_possible(cpu))
- return;
-
sprintf(dir, "cpu/%u", cpu);
err = xenbus_scanf(XBT_NIL, dir, "availability", "%s", state);
if (err != 1) {
printk(KERN_ERR "XENBUS: Unable to read cpu state\n");
- return;
+ return err;
}
- if (strcmp(state, "online") == 0) {
+ if (strcmp(state, "online") == 0)
+ return 1;
+ else if (strcmp(state, "offline") == 0)
+ return 0;
+
+ printk(KERN_ERR "XENBUS: unknown state(%s) on CPU%d\n", state, cpu);
+ return -EINVAL;
+}
+static void vcpu_hotplug(unsigned int cpu)
+{
+ if (!cpu_possible(cpu))
+ return;
+
+ switch (vcpu_online(cpu)) {
+ case 1:
enable_hotplug_cpu(cpu);
- } else if (strcmp(state, "offline") == 0) {
+ break;
+ case 0:
(void)cpu_down(cpu);
disable_hotplug_cpu(cpu);
- } else {
- printk(KERN_ERR "XENBUS: unknown state(%s) on CPU%d\n",
- state, cpu);
+ break;
+ default:
+ break;
}
}
@@ -64,12 +76,20 @@
static int setup_cpu_watcher(struct notifier_block *notifier,
unsigned long event, void *data)
{
+ int cpu;
static struct xenbus_watch cpu_watch = {
.node = "cpu",
.callback = handle_vcpu_hotplug_event};
(void)register_xenbus_watch(&cpu_watch);
+ for_each_possible_cpu(cpu) {
+ if (vcpu_online(cpu) == 0) {
+ (void)cpu_down(cpu);
+ cpu_clear(cpu, cpu_present_map);
+ }
+ }
+
return NOTIFY_DONE;
}
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index 0d61db1..4b5b848 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -62,14 +62,15 @@
gnttab_resume();
xen_mm_unpin_all();
- sysdev_resume();
-
if (!*cancelled) {
xen_irq_resume();
xen_console_resume();
xen_timer_resume();
}
+ sysdev_resume();
+ device_power_up(PMSG_RESUME);
+
return 0;
}
diff --git a/fs/afs/file.c b/fs/afs/file.c
index 7a1d942..0149dab 100644
--- a/fs/afs/file.c
+++ b/fs/afs/file.c
@@ -102,6 +102,7 @@
return 0;
}
+#ifdef CONFIG_AFS_FSCACHE
/*
* deal with notification that a page was read from the cache
*/
@@ -117,6 +118,7 @@
SetPageUptodate(page);
unlock_page(page);
}
+#endif
/*
* AFS read page from file, directory or symlink
diff --git a/fs/autofs/dirhash.c b/fs/autofs/dirhash.c
index bf8c8af..4eb4d8d 100644
--- a/fs/autofs/dirhash.c
+++ b/fs/autofs/dirhash.c
@@ -39,10 +39,12 @@
{
struct autofs_dirhash *dh = &sbi->dirhash;
struct autofs_dir_ent *ent;
- struct dentry *dentry;
unsigned long timeout = sbi->exp_timeout;
while (1) {
+ struct path path;
+ int umount_ok;
+
if ( list_empty(&dh->expiry_head) || sbi->catatonic )
return NULL; /* No entries */
/* We keep the list sorted by last_usage and want old stuff */
@@ -57,17 +59,17 @@
return ent; /* Symlinks are always expirable */
/* Get the dentry for the autofs subdirectory */
- dentry = ent->dentry;
+ path.dentry = ent->dentry;
- if ( !dentry ) {
+ if (!path.dentry) {
/* Should only happen in catatonic mode */
printk("autofs: dentry == NULL but inode range is directory, entry %s\n", ent->name);
autofs_delete_usage(ent);
continue;
}
- if ( !dentry->d_inode ) {
- dput(dentry);
+ if (!path.dentry->d_inode) {
+ dput(path.dentry);
printk("autofs: negative dentry on expiry queue: %s\n",
ent->name);
autofs_delete_usage(ent);
@@ -76,29 +78,29 @@
/* Make sure entry is mounted and unused; note that dentry will
point to the mounted-on-top root. */
- if (!S_ISDIR(dentry->d_inode->i_mode)||!d_mountpoint(dentry)) {
+ if (!S_ISDIR(path.dentry->d_inode->i_mode) ||
+ !d_mountpoint(path.dentry)) {
DPRINTK(("autofs: not expirable (not a mounted directory): %s\n", ent->name));
continue;
}
- mntget(mnt);
- dget(dentry);
- if (!follow_down(&mnt, &dentry)) {
- dput(dentry);
- mntput(mnt);
+ path.mnt = mnt;
+ path_get(&path);
+ if (!follow_down(&path.mnt, &path.dentry)) {
+ path_put(&path);
DPRINTK(("autofs: not expirable (not a mounted directory): %s\n", ent->name));
continue;
}
- while (d_mountpoint(dentry) && follow_down(&mnt, &dentry))
+ while (d_mountpoint(path.dentry) &&
+ follow_down(&path.mnt, &path.dentry))
;
- dput(dentry);
+ umount_ok = may_umount(path.mnt);
+ path_put(&path);
- if ( may_umount(mnt) ) {
- mntput(mnt);
+ if (umount_ok) {
DPRINTK(("autofs: signaling expire on %s\n", ent->name));
return ent; /* Expirable! */
}
DPRINTK(("autofs: didn't expire due to may_umount: %s\n", ent->name));
- mntput(mnt);
}
return NULL; /* No expirable entries */
}
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 9e5ae8a..84168c0 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -54,11 +54,10 @@
* Check a string doesn't overrun the chunk of
* memory we copied from user land.
*/
-static int invalid_str(char *str, void *end)
+static int invalid_str(char *str, size_t size)
{
- while ((void *) str <= end)
- if (!*str++)
- return 0;
+ if (memchr(str, 0, size))
+ return 0;
return -EINVAL;
}
@@ -138,8 +137,7 @@
}
if (param->size > sizeof(*param)) {
- err = invalid_str(param->path,
- (void *) ((size_t) param + param->size));
+ err = invalid_str(param->path, param->size - sizeof(*param));
if (err) {
AUTOFS_WARN(
"path string terminator missing for cmd(0x%08x)",
@@ -488,7 +486,7 @@
}
path = param->path;
- devid = sbi->sb->s_dev;
+ devid = new_encode_dev(sbi->sb->s_dev);
param->requester.uid = param->requester.gid = -1;
diff --git a/fs/bio.c b/fs/bio.c
index e0c9e54..cd42bb8 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -348,6 +348,24 @@
return NULL;
}
+/**
+ * bio_alloc - allocate a bio for I/O
+ * @gfp_mask: the GFP_ mask given to the slab allocator
+ * @nr_iovecs: number of iovecs to pre-allocate
+ *
+ * Description:
+ * bio_alloc will allocate a bio and associated bio_vec array that can hold
+ * at least @nr_iovecs entries. Allocations will be done from the
+ * fs_bio_set. Also see @bio_alloc_bioset.
+ *
+ * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate
+ * a bio. This is due to the mempool guarantees. To make this work, callers
+ * must never allocate more than 1 bio at the time from this pool. Callers
+ * that need to allocate more than 1 bio must always submit the previously
+ * allocate bio for IO before attempting to allocate a new one. Failure to
+ * do so can cause livelocks under memory pressure.
+ *
+ **/
struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs)
{
struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set);
diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index 51bfdfc..502c3d6 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -25,6 +25,7 @@
#define WORK_QUEUED_BIT 0
#define WORK_DONE_BIT 1
#define WORK_ORDER_DONE_BIT 2
+#define WORK_HIGH_PRIO_BIT 3
/*
* container for the kthread task pointer and the list of pending work
@@ -36,6 +37,7 @@
/* list of struct btrfs_work that are waiting for service */
struct list_head pending;
+ struct list_head prio_pending;
/* list of worker threads from struct btrfs_workers */
struct list_head worker_list;
@@ -103,10 +105,16 @@
spin_lock_irqsave(&workers->lock, flags);
- while (!list_empty(&workers->order_list)) {
- work = list_entry(workers->order_list.next,
- struct btrfs_work, order_list);
-
+ while (1) {
+ if (!list_empty(&workers->prio_order_list)) {
+ work = list_entry(workers->prio_order_list.next,
+ struct btrfs_work, order_list);
+ } else if (!list_empty(&workers->order_list)) {
+ work = list_entry(workers->order_list.next,
+ struct btrfs_work, order_list);
+ } else {
+ break;
+ }
if (!test_bit(WORK_DONE_BIT, &work->flags))
break;
@@ -143,8 +151,14 @@
do {
spin_lock_irq(&worker->lock);
again_locked:
- while (!list_empty(&worker->pending)) {
- cur = worker->pending.next;
+ while (1) {
+ if (!list_empty(&worker->prio_pending))
+ cur = worker->prio_pending.next;
+ else if (!list_empty(&worker->pending))
+ cur = worker->pending.next;
+ else
+ break;
+
work = list_entry(cur, struct btrfs_work, list);
list_del(&work->list);
clear_bit(WORK_QUEUED_BIT, &work->flags);
@@ -163,7 +177,6 @@
spin_lock_irq(&worker->lock);
check_idle_worker(worker);
-
}
if (freezing(current)) {
worker->working = 0;
@@ -178,7 +191,8 @@
* jump_in?
*/
smp_mb();
- if (!list_empty(&worker->pending))
+ if (!list_empty(&worker->pending) ||
+ !list_empty(&worker->prio_pending))
continue;
/*
@@ -191,7 +205,8 @@
*/
schedule_timeout(1);
smp_mb();
- if (!list_empty(&worker->pending))
+ if (!list_empty(&worker->pending) ||
+ !list_empty(&worker->prio_pending))
continue;
if (kthread_should_stop())
@@ -200,7 +215,8 @@
/* still no more work?, sleep for real */
spin_lock_irq(&worker->lock);
set_current_state(TASK_INTERRUPTIBLE);
- if (!list_empty(&worker->pending))
+ if (!list_empty(&worker->pending) ||
+ !list_empty(&worker->prio_pending))
goto again_locked;
/*
@@ -248,6 +264,7 @@
INIT_LIST_HEAD(&workers->worker_list);
INIT_LIST_HEAD(&workers->idle_list);
INIT_LIST_HEAD(&workers->order_list);
+ INIT_LIST_HEAD(&workers->prio_order_list);
spin_lock_init(&workers->lock);
workers->max_workers = max;
workers->idle_thresh = 32;
@@ -273,6 +290,7 @@
}
INIT_LIST_HEAD(&worker->pending);
+ INIT_LIST_HEAD(&worker->prio_pending);
INIT_LIST_HEAD(&worker->worker_list);
spin_lock_init(&worker->lock);
atomic_set(&worker->num_pending, 0);
@@ -396,7 +414,10 @@
goto out;
spin_lock_irqsave(&worker->lock, flags);
- list_add_tail(&work->list, &worker->pending);
+ if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags))
+ list_add_tail(&work->list, &worker->prio_pending);
+ else
+ list_add_tail(&work->list, &worker->pending);
atomic_inc(&worker->num_pending);
/* by definition we're busy, take ourselves off the idle
@@ -422,6 +443,11 @@
return 0;
}
+void btrfs_set_work_high_prio(struct btrfs_work *work)
+{
+ set_bit(WORK_HIGH_PRIO_BIT, &work->flags);
+}
+
/*
* places a struct btrfs_work into the pending queue of one of the kthreads
*/
@@ -438,7 +464,12 @@
worker = find_worker(workers);
if (workers->ordered) {
spin_lock_irqsave(&workers->lock, flags);
- list_add_tail(&work->order_list, &workers->order_list);
+ if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags)) {
+ list_add_tail(&work->order_list,
+ &workers->prio_order_list);
+ } else {
+ list_add_tail(&work->order_list, &workers->order_list);
+ }
spin_unlock_irqrestore(&workers->lock, flags);
} else {
INIT_LIST_HEAD(&work->order_list);
@@ -446,7 +477,10 @@
spin_lock_irqsave(&worker->lock, flags);
- list_add_tail(&work->list, &worker->pending);
+ if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags))
+ list_add_tail(&work->list, &worker->prio_pending);
+ else
+ list_add_tail(&work->list, &worker->pending);
atomic_inc(&worker->num_pending);
check_busy_worker(worker);
diff --git a/fs/btrfs/async-thread.h b/fs/btrfs/async-thread.h
index 31be4ed..1b511c1 100644
--- a/fs/btrfs/async-thread.h
+++ b/fs/btrfs/async-thread.h
@@ -85,6 +85,7 @@
* of work items waiting for completion
*/
struct list_head order_list;
+ struct list_head prio_order_list;
/* lock for finding the next worker thread to queue on */
spinlock_t lock;
@@ -98,4 +99,5 @@
int btrfs_stop_workers(struct btrfs_workers *workers);
void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max);
int btrfs_requeue_work(struct btrfs_work *work);
+void btrfs_set_work_high_prio(struct btrfs_work *work);
#endif
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index e5b2533..a99f1c2 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -1325,12 +1325,12 @@
int ret = 0;
int blocksize;
- parent = path->nodes[level - 1];
+ parent = path->nodes[level + 1];
if (!parent)
return 0;
nritems = btrfs_header_nritems(parent);
- slot = path->slots[level];
+ slot = path->slots[level + 1];
blocksize = btrfs_level_size(root, level);
if (slot > 0) {
@@ -1341,7 +1341,7 @@
block1 = 0;
free_extent_buffer(eb);
}
- if (slot < nritems) {
+ if (slot + 1 < nritems) {
block2 = btrfs_node_blockptr(parent, slot + 1);
gen = btrfs_node_ptr_generation(parent, slot + 1);
eb = btrfs_find_tree_block(root, block2, blocksize);
@@ -1351,7 +1351,11 @@
}
if (block1 || block2) {
ret = -EAGAIN;
+
+ /* release the whole path */
btrfs_release_path(root, path);
+
+ /* read the blocks */
if (block1)
readahead_tree_block(root, block1, blocksize, 0);
if (block2)
@@ -1361,7 +1365,7 @@
eb = read_tree_block(root, block1, blocksize, 0);
free_extent_buffer(eb);
}
- if (block1) {
+ if (block2) {
eb = read_tree_block(root, block2, blocksize, 0);
free_extent_buffer(eb);
}
@@ -1481,12 +1485,15 @@
* of the btree by dropping locks before
* we read.
*/
- btrfs_release_path(NULL, p);
+ btrfs_unlock_up_safe(p, level + 1);
+ btrfs_set_path_blocking(p);
+
if (tmp)
free_extent_buffer(tmp);
if (p->reada)
reada_for_search(root, p, level, slot, key->objectid);
+ btrfs_release_path(NULL, p);
tmp = read_tree_block(root, blocknr, blocksize, gen);
if (tmp)
free_extent_buffer(tmp);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 92caa80..a6b8374 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -579,6 +579,10 @@
async->bio_flags = bio_flags;
atomic_inc(&fs_info->nr_async_submits);
+
+ if (rw & (1 << BIO_RW_SYNCIO))
+ btrfs_set_work_high_prio(&async->work);
+
btrfs_queue_worker(&fs_info->workers, &async->work);
#if 0
int limit = btrfs_async_submit_limit(fs_info);
@@ -656,6 +660,7 @@
return btrfs_map_bio(BTRFS_I(inode)->root, rw, bio,
mirror_num, 0);
}
+
/*
* kthread helpers are used to submit writes so that checksumming
* can happen in parallel across all CPUs
@@ -2095,10 +2100,10 @@
device->barriers = 0;
get_bh(bh);
lock_buffer(bh);
- ret = submit_bh(WRITE, bh);
+ ret = submit_bh(WRITE_SYNC, bh);
}
} else {
- ret = submit_bh(WRITE, bh);
+ ret = submit_bh(WRITE_SYNC, bh);
}
if (!ret && wait) {
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index eb2bee8..05a1c42 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -50,7 +50,10 @@
/* tells writepage not to lock the state bits for this range
* it still does the unlocking
*/
- int extent_locked;
+ unsigned int extent_locked:1;
+
+ /* tells the submit_bio code to use a WRITE_SYNC */
+ unsigned int sync_io:1;
};
int __init extent_io_init(void)
@@ -2101,6 +2104,16 @@
return ret;
}
+static noinline void update_nr_written(struct page *page,
+ struct writeback_control *wbc,
+ unsigned long nr_written)
+{
+ wbc->nr_to_write -= nr_written;
+ if (wbc->range_cyclic || (wbc->nr_to_write > 0 &&
+ wbc->range_start == 0 && wbc->range_end == LLONG_MAX))
+ page->mapping->writeback_index = page->index + nr_written;
+}
+
/*
* the writepage semantics are similar to regular writepage. extent
* records are inserted to lock ranges in the tree, and as dirty areas
@@ -2136,8 +2149,14 @@
u64 delalloc_end;
int page_started;
int compressed;
+ int write_flags;
unsigned long nr_written = 0;
+ if (wbc->sync_mode == WB_SYNC_ALL)
+ write_flags = WRITE_SYNC_PLUG;
+ else
+ write_flags = WRITE;
+
WARN_ON(!PageLocked(page));
pg_offset = i_size & (PAGE_CACHE_SIZE - 1);
if (page->index > end_index ||
@@ -2164,6 +2183,12 @@
delalloc_end = 0;
page_started = 0;
if (!epd->extent_locked) {
+ /*
+ * make sure the wbc mapping index is at least updated
+ * to this page.
+ */
+ update_nr_written(page, wbc, 0);
+
while (delalloc_end < page_end) {
nr_delalloc = find_lock_delalloc_range(inode, tree,
page,
@@ -2185,7 +2210,13 @@
*/
if (page_started) {
ret = 0;
- goto update_nr_written;
+ /*
+ * we've unlocked the page, so we can't update
+ * the mapping's writeback index, just update
+ * nr_to_write.
+ */
+ wbc->nr_to_write -= nr_written;
+ goto done_unlocked;
}
}
lock_extent(tree, start, page_end, GFP_NOFS);
@@ -2198,13 +2229,18 @@
if (ret == -EAGAIN) {
unlock_extent(tree, start, page_end, GFP_NOFS);
redirty_page_for_writepage(wbc, page);
+ update_nr_written(page, wbc, nr_written);
unlock_page(page);
ret = 0;
- goto update_nr_written;
+ goto done_unlocked;
}
}
- nr_written++;
+ /*
+ * we don't want to touch the inode after unlocking the page,
+ * so we update the mapping writeback index now
+ */
+ update_nr_written(page, wbc, nr_written + 1);
end = page_end;
if (test_range_bit(tree, start, page_end, EXTENT_DELALLOC, 0))
@@ -2314,9 +2350,9 @@
(unsigned long long)end);
}
- ret = submit_extent_page(WRITE, tree, page, sector,
- iosize, pg_offset, bdev,
- &epd->bio, max_nr,
+ ret = submit_extent_page(write_flags, tree, page,
+ sector, iosize, pg_offset,
+ bdev, &epd->bio, max_nr,
end_bio_extent_writepage,
0, 0, 0);
if (ret)
@@ -2336,11 +2372,8 @@
unlock_extent(tree, unlock_start, page_end, GFP_NOFS);
unlock_page(page);
-update_nr_written:
- wbc->nr_to_write -= nr_written;
- if (wbc->range_cyclic || (wbc->nr_to_write > 0 &&
- wbc->range_start == 0 && wbc->range_end == LLONG_MAX))
- page->mapping->writeback_index = page->index + nr_written;
+done_unlocked:
+
return 0;
}
@@ -2460,13 +2493,21 @@
return ret;
}
+static void flush_epd_write_bio(struct extent_page_data *epd)
+{
+ if (epd->bio) {
+ if (epd->sync_io)
+ submit_one_bio(WRITE_SYNC, epd->bio, 0, 0);
+ else
+ submit_one_bio(WRITE, epd->bio, 0, 0);
+ epd->bio = NULL;
+ }
+}
+
static noinline void flush_write_bio(void *data)
{
struct extent_page_data *epd = data;
- if (epd->bio) {
- submit_one_bio(WRITE, epd->bio, 0, 0);
- epd->bio = NULL;
- }
+ flush_epd_write_bio(epd);
}
int extent_write_full_page(struct extent_io_tree *tree, struct page *page,
@@ -2480,23 +2521,22 @@
.tree = tree,
.get_extent = get_extent,
.extent_locked = 0,
+ .sync_io = wbc->sync_mode == WB_SYNC_ALL,
};
struct writeback_control wbc_writepages = {
.bdi = wbc->bdi,
- .sync_mode = WB_SYNC_NONE,
+ .sync_mode = wbc->sync_mode,
.older_than_this = NULL,
.nr_to_write = 64,
.range_start = page_offset(page) + PAGE_CACHE_SIZE,
.range_end = (loff_t)-1,
};
-
ret = __extent_writepage(page, wbc, &epd);
extent_write_cache_pages(tree, mapping, &wbc_writepages,
__extent_writepage, &epd, flush_write_bio);
- if (epd.bio)
- submit_one_bio(WRITE, epd.bio, 0, 0);
+ flush_epd_write_bio(&epd);
return ret;
}
@@ -2515,6 +2555,7 @@
.tree = tree,
.get_extent = get_extent,
.extent_locked = 1,
+ .sync_io = mode == WB_SYNC_ALL,
};
struct writeback_control wbc_writepages = {
.bdi = inode->i_mapping->backing_dev_info,
@@ -2540,8 +2581,7 @@
start += PAGE_CACHE_SIZE;
}
- if (epd.bio)
- submit_one_bio(WRITE, epd.bio, 0, 0);
+ flush_epd_write_bio(&epd);
return ret;
}
@@ -2556,13 +2596,13 @@
.tree = tree,
.get_extent = get_extent,
.extent_locked = 0,
+ .sync_io = wbc->sync_mode == WB_SYNC_ALL,
};
ret = extent_write_cache_pages(tree, mapping, wbc,
__extent_writepage, &epd,
flush_write_bio);
- if (epd.bio)
- submit_one_bio(WRITE, epd.bio, 0, 0);
+ flush_epd_write_bio(&epd);
return ret;
}
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 9c9fb46..482f8db 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -830,7 +830,7 @@
ret = btrfs_del_items(trans, root, path, del_slot, del_nr);
BUG_ON(ret);
- goto done;
+ goto release;
} else if (split == start) {
if (locked_end < extent_end) {
ret = try_lock_extent(&BTRFS_I(inode)->io_tree,
@@ -926,6 +926,8 @@
}
done:
btrfs_mark_buffer_dirty(leaf);
+
+release:
btrfs_release_path(root, path);
if (split_end && split == start) {
split = end;
@@ -1131,7 +1133,7 @@
if (will_write) {
btrfs_fdatawrite_range(inode->i_mapping, pos,
pos + write_bytes - 1,
- WB_SYNC_NONE);
+ WB_SYNC_ALL);
} else {
balance_dirty_pages_ratelimited_nr(inode->i_mapping,
num_pages);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index a0d1dd4..65219f6 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -4970,10 +4970,10 @@
return err;
}
-static int prealloc_file_range(struct inode *inode, u64 start, u64 end,
+static int prealloc_file_range(struct btrfs_trans_handle *trans,
+ struct inode *inode, u64 start, u64 end,
u64 alloc_hint, int mode)
{
- struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_key ins;
u64 alloc_size;
@@ -4981,10 +4981,6 @@
u64 num_bytes = end - start;
int ret = 0;
- trans = btrfs_join_transaction(root, 1);
- BUG_ON(!trans);
- btrfs_set_trans_block_group(trans, inode);
-
while (num_bytes > 0) {
alloc_size = min(num_bytes, root->fs_info->max_extent);
ret = btrfs_reserve_extent(trans, root, alloc_size,
@@ -5015,7 +5011,6 @@
BUG_ON(ret);
}
- btrfs_end_transaction(trans, root);
return ret;
}
@@ -5029,11 +5024,18 @@
u64 alloc_hint = 0;
u64 mask = BTRFS_I(inode)->root->sectorsize - 1;
struct extent_map *em;
+ struct btrfs_trans_handle *trans;
int ret;
alloc_start = offset & ~mask;
alloc_end = (offset + len + mask) & ~mask;
+ /*
+ * wait for ordered IO before we have any locks. We'll loop again
+ * below with the locks held.
+ */
+ btrfs_wait_ordered_range(inode, alloc_start, alloc_end - alloc_start);
+
mutex_lock(&inode->i_mutex);
if (alloc_start > inode->i_size) {
ret = btrfs_cont_expand(inode, alloc_start);
@@ -5043,6 +5045,16 @@
while (1) {
struct btrfs_ordered_extent *ordered;
+
+ trans = btrfs_start_transaction(BTRFS_I(inode)->root, 1);
+ if (!trans) {
+ ret = -EIO;
+ goto out;
+ }
+
+ /* the extent lock is ordered inside the running
+ * transaction
+ */
lock_extent(&BTRFS_I(inode)->io_tree, alloc_start,
alloc_end - 1, GFP_NOFS);
ordered = btrfs_lookup_first_ordered_extent(inode,
@@ -5053,6 +5065,12 @@
btrfs_put_ordered_extent(ordered);
unlock_extent(&BTRFS_I(inode)->io_tree,
alloc_start, alloc_end - 1, GFP_NOFS);
+ btrfs_end_transaction(trans, BTRFS_I(inode)->root);
+
+ /*
+ * we can't wait on the range with the transaction
+ * running or with the extent lock held
+ */
btrfs_wait_ordered_range(inode, alloc_start,
alloc_end - alloc_start);
} else {
@@ -5070,7 +5088,7 @@
last_byte = min(extent_map_end(em), alloc_end);
last_byte = (last_byte + mask) & ~mask;
if (em->block_start == EXTENT_MAP_HOLE) {
- ret = prealloc_file_range(inode, cur_offset,
+ ret = prealloc_file_range(trans, inode, cur_offset,
last_byte, alloc_hint, mode);
if (ret < 0) {
free_extent_map(em);
@@ -5089,6 +5107,8 @@
}
unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, alloc_end - 1,
GFP_NOFS);
+
+ btrfs_end_transaction(trans, BTRFS_I(inode)->root);
out:
mutex_unlock(&inode->i_mutex);
return ret;
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 7594bec..9f135e8 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -461,15 +461,9 @@
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
-
- if (!vol_args)
- return -ENOMEM;
-
- if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
- ret = -EFAULT;
- goto out;
- }
+ vol_args = memdup_user(arg, sizeof(*vol_args));
+ if (IS_ERR(vol_args))
+ return PTR_ERR(vol_args);
vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
namelen = strlen(vol_args->name);
@@ -545,7 +539,6 @@
out_unlock:
mutex_unlock(&root->fs_info->volume_mutex);
-out:
kfree(vol_args);
return ret;
}
@@ -565,15 +558,9 @@
if (root->fs_info->sb->s_flags & MS_RDONLY)
return -EROFS;
- vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
-
- if (!vol_args)
- return -ENOMEM;
-
- if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
- ret = -EFAULT;
- goto out;
- }
+ vol_args = memdup_user(arg, sizeof(*vol_args));
+ if (IS_ERR(vol_args))
+ return PTR_ERR(vol_args);
vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
namelen = strlen(vol_args->name);
@@ -675,19 +662,13 @@
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
+ vol_args = memdup_user(arg, sizeof(*vol_args));
+ if (IS_ERR(vol_args))
+ return PTR_ERR(vol_args);
- if (!vol_args)
- return -ENOMEM;
-
- if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
- ret = -EFAULT;
- goto out;
- }
vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
ret = btrfs_init_new_device(root, vol_args->name);
-out:
kfree(vol_args);
return ret;
}
@@ -703,19 +684,13 @@
if (root->fs_info->sb->s_flags & MS_RDONLY)
return -EROFS;
- vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
+ vol_args = memdup_user(arg, sizeof(*vol_args));
+ if (IS_ERR(vol_args))
+ return PTR_ERR(vol_args);
- if (!vol_args)
- return -ENOMEM;
-
- if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
- ret = -EFAULT;
- goto out;
- }
vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
ret = btrfs_rm_device(root, vol_args->name);
-out:
kfree(vol_args);
return ret;
}
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index 53c87b1..d6f0806 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -489,7 +489,7 @@
/* start IO across the range first to instantiate any delalloc
* extents
*/
- btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_NONE);
+ btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_ALL);
/* The compression code will leave pages locked but return from
* writepage without setting the page writeback. Starting again
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 9744af9..a7acfe6 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -635,14 +635,9 @@
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- vol = kmalloc(sizeof(*vol), GFP_KERNEL);
- if (!vol)
- return -ENOMEM;
-
- if (copy_from_user(vol, (void __user *)arg, sizeof(*vol))) {
- ret = -EFAULT;
- goto out;
- }
+ vol = memdup_user((void __user *)arg, sizeof(*vol));
+ if (IS_ERR(vol))
+ return PTR_ERR(vol);
switch (cmd) {
case BTRFS_IOC_SCAN_DEV:
@@ -650,7 +645,7 @@
&btrfs_fs_type, &fs_devices);
break;
}
-out:
+
kfree(vol);
return ret;
}
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index e0913e4..e53835b 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -125,6 +125,20 @@
return NULL;
}
+static void requeue_list(struct btrfs_pending_bios *pending_bios,
+ struct bio *head, struct bio *tail)
+{
+
+ struct bio *old_head;
+
+ old_head = pending_bios->head;
+ pending_bios->head = head;
+ if (pending_bios->tail)
+ tail->bi_next = old_head;
+ else
+ pending_bios->tail = tail;
+}
+
/*
* we try to collect pending bios for a device so we don't get a large
* number of procs sending bios down to the same device. This greatly
@@ -141,10 +155,12 @@
struct bio *pending;
struct backing_dev_info *bdi;
struct btrfs_fs_info *fs_info;
+ struct btrfs_pending_bios *pending_bios;
struct bio *tail;
struct bio *cur;
int again = 0;
- unsigned long num_run = 0;
+ unsigned long num_run;
+ unsigned long num_sync_run;
unsigned long limit;
unsigned long last_waited = 0;
@@ -153,20 +169,30 @@
limit = btrfs_async_submit_limit(fs_info);
limit = limit * 2 / 3;
+ /* we want to make sure that every time we switch from the sync
+ * list to the normal list, we unplug
+ */
+ num_sync_run = 0;
+
loop:
spin_lock(&device->io_lock);
+ num_run = 0;
loop_lock:
+
/* take all the bios off the list at once and process them
* later on (without the lock held). But, remember the
* tail and other pointers so the bios can be properly reinserted
* into the list if we hit congestion
*/
- pending = device->pending_bios;
- tail = device->pending_bio_tail;
+ if (device->pending_sync_bios.head)
+ pending_bios = &device->pending_sync_bios;
+ else
+ pending_bios = &device->pending_bios;
+
+ pending = pending_bios->head;
+ tail = pending_bios->tail;
WARN_ON(pending && !tail);
- device->pending_bios = NULL;
- device->pending_bio_tail = NULL;
/*
* if pending was null this time around, no bios need processing
@@ -176,16 +202,41 @@
* device->running_pending is used to synchronize with the
* schedule_bio code.
*/
- if (pending) {
- again = 1;
- device->running_pending = 1;
- } else {
+ if (device->pending_sync_bios.head == NULL &&
+ device->pending_bios.head == NULL) {
again = 0;
device->running_pending = 0;
+ } else {
+ again = 1;
+ device->running_pending = 1;
}
+
+ pending_bios->head = NULL;
+ pending_bios->tail = NULL;
+
spin_unlock(&device->io_lock);
+ /*
+ * if we're doing the regular priority list, make sure we unplug
+ * for any high prio bios we've sent down
+ */
+ if (pending_bios == &device->pending_bios && num_sync_run > 0) {
+ num_sync_run = 0;
+ blk_run_backing_dev(bdi, NULL);
+ }
+
while (pending) {
+
+ rmb();
+ if (pending_bios != &device->pending_sync_bios &&
+ device->pending_sync_bios.head &&
+ num_run > 16) {
+ cond_resched();
+ spin_lock(&device->io_lock);
+ requeue_list(pending_bios, pending, tail);
+ goto loop_lock;
+ }
+
cur = pending;
pending = pending->bi_next;
cur->bi_next = NULL;
@@ -196,10 +247,18 @@
wake_up(&fs_info->async_submit_wait);
BUG_ON(atomic_read(&cur->bi_cnt) == 0);
- bio_get(cur);
submit_bio(cur->bi_rw, cur);
- bio_put(cur);
num_run++;
+ if (bio_sync(cur))
+ num_sync_run++;
+
+ if (need_resched()) {
+ if (num_sync_run) {
+ blk_run_backing_dev(bdi, NULL);
+ num_sync_run = 0;
+ }
+ cond_resched();
+ }
/*
* we made progress, there is more work to do and the bdi
@@ -208,7 +267,6 @@
*/
if (pending && bdi_write_congested(bdi) && num_run > 16 &&
fs_info->fs_devices->open_devices > 1) {
- struct bio *old_head;
struct io_context *ioc;
ioc = current->io_context;
@@ -233,17 +291,17 @@
* against it before looping
*/
last_waited = ioc->last_waited;
+ if (need_resched()) {
+ if (num_sync_run) {
+ blk_run_backing_dev(bdi, NULL);
+ num_sync_run = 0;
+ }
+ cond_resched();
+ }
continue;
}
spin_lock(&device->io_lock);
-
- old_head = device->pending_bios;
- device->pending_bios = pending;
- if (device->pending_bio_tail)
- tail->bi_next = old_head;
- else
- device->pending_bio_tail = tail;
-
+ requeue_list(pending_bios, pending, tail);
device->running_pending = 1;
spin_unlock(&device->io_lock);
@@ -251,11 +309,18 @@
goto done;
}
}
+
+ if (num_sync_run) {
+ num_sync_run = 0;
+ blk_run_backing_dev(bdi, NULL);
+ }
+
+ cond_resched();
if (again)
goto loop;
spin_lock(&device->io_lock);
- if (device->pending_bios)
+ if (device->pending_bios.head || device->pending_sync_bios.head)
goto loop_lock;
spin_unlock(&device->io_lock);
@@ -2497,7 +2562,7 @@
max_errors = 1;
}
}
- if (multi_ret && rw == WRITE &&
+ if (multi_ret && (rw & (1 << BIO_RW)) &&
stripes_allocated < stripes_required) {
stripes_allocated = map->num_stripes;
free_extent_map(em);
@@ -2762,6 +2827,7 @@
int rw, struct bio *bio)
{
int should_queue = 1;
+ struct btrfs_pending_bios *pending_bios;
/* don't bother with additional async steps for reads, right now */
if (!(rw & (1 << BIO_RW))) {
@@ -2783,13 +2849,17 @@
bio->bi_rw |= rw;
spin_lock(&device->io_lock);
+ if (bio_sync(bio))
+ pending_bios = &device->pending_sync_bios;
+ else
+ pending_bios = &device->pending_bios;
- if (device->pending_bio_tail)
- device->pending_bio_tail->bi_next = bio;
+ if (pending_bios->tail)
+ pending_bios->tail->bi_next = bio;
- device->pending_bio_tail = bio;
- if (!device->pending_bios)
- device->pending_bios = bio;
+ pending_bios->tail = bio;
+ if (!pending_bios->head)
+ pending_bios->head = bio;
if (device->running_pending)
should_queue = 0;
diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index 2185de7..5836327 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -23,13 +23,22 @@
#include "async-thread.h"
struct buffer_head;
+struct btrfs_pending_bios {
+ struct bio *head;
+ struct bio *tail;
+};
+
struct btrfs_device {
struct list_head dev_list;
struct list_head dev_alloc_list;
struct btrfs_fs_devices *fs_devices;
struct btrfs_root *dev_root;
- struct bio *pending_bios;
- struct bio *pending_bio_tail;
+
+ /* regular prio bios */
+ struct btrfs_pending_bios pending_bios;
+ /* WRITE_SYNC bios */
+ struct btrfs_pending_bios pending_sync_bios;
+
int running_pending;
u64 generation;
diff --git a/fs/buffer.c b/fs/buffer.c
index 13edf7a..b3e5be7 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -360,7 +360,7 @@
* Completion handler for block_write_full_page() - pages which are unlocked
* during I/O, and which have PageWriteback cleared upon I/O completion.
*/
-static void end_buffer_async_write(struct buffer_head *bh, int uptodate)
+void end_buffer_async_write(struct buffer_head *bh, int uptodate)
{
char b[BDEVNAME_SIZE];
unsigned long flags;
@@ -438,10 +438,16 @@
set_buffer_async_read(bh);
}
+void mark_buffer_async_write_endio(struct buffer_head *bh,
+ bh_end_io_t *handler)
+{
+ bh->b_end_io = handler;
+ set_buffer_async_write(bh);
+}
+
void mark_buffer_async_write(struct buffer_head *bh)
{
- bh->b_end_io = end_buffer_async_write;
- set_buffer_async_write(bh);
+ mark_buffer_async_write_endio(bh, end_buffer_async_write);
}
EXPORT_SYMBOL(mark_buffer_async_write);
@@ -547,7 +553,7 @@
return err;
}
-void do_thaw_all(unsigned long unused)
+void do_thaw_all(struct work_struct *work)
{
struct super_block *sb;
char b[BDEVNAME_SIZE];
@@ -567,6 +573,7 @@
goto restart;
}
spin_unlock(&sb_lock);
+ kfree(work);
printk(KERN_WARNING "Emergency Thaw complete\n");
}
@@ -577,7 +584,13 @@
*/
void emergency_thaw_all(void)
{
- pdflush_operation(do_thaw_all, 0);
+ struct work_struct *work;
+
+ work = kmalloc(sizeof(*work), GFP_ATOMIC);
+ if (work) {
+ INIT_WORK(work, do_thaw_all);
+ schedule_work(work);
+ }
}
/**
@@ -1608,7 +1621,8 @@
* unplugging the device queue.
*/
static int __block_write_full_page(struct inode *inode, struct page *page,
- get_block_t *get_block, struct writeback_control *wbc)
+ get_block_t *get_block, struct writeback_control *wbc,
+ bh_end_io_t *handler)
{
int err;
sector_t block;
@@ -1693,7 +1707,7 @@
continue;
}
if (test_clear_buffer_dirty(bh)) {
- mark_buffer_async_write(bh);
+ mark_buffer_async_write_endio(bh, handler);
} else {
unlock_buffer(bh);
}
@@ -1746,7 +1760,7 @@
if (buffer_mapped(bh) && buffer_dirty(bh) &&
!buffer_delay(bh)) {
lock_buffer(bh);
- mark_buffer_async_write(bh);
+ mark_buffer_async_write_endio(bh, handler);
} else {
/*
* The buffer may have been set dirty during
@@ -2672,7 +2686,8 @@
out:
ret = mpage_writepage(page, get_block, wbc);
if (ret == -EAGAIN)
- ret = __block_write_full_page(inode, page, get_block, wbc);
+ ret = __block_write_full_page(inode, page, get_block, wbc,
+ end_buffer_async_write);
return ret;
}
EXPORT_SYMBOL(nobh_writepage);
@@ -2830,9 +2845,10 @@
/*
* The generic ->writepage function for buffer-backed address_spaces
+ * this form passes in the end_io handler used to finish the IO.
*/
-int block_write_full_page(struct page *page, get_block_t *get_block,
- struct writeback_control *wbc)
+int block_write_full_page_endio(struct page *page, get_block_t *get_block,
+ struct writeback_control *wbc, bh_end_io_t *handler)
{
struct inode * const inode = page->mapping->host;
loff_t i_size = i_size_read(inode);
@@ -2841,7 +2857,8 @@
/* Is the page fully inside i_size? */
if (page->index < end_index)
- return __block_write_full_page(inode, page, get_block, wbc);
+ return __block_write_full_page(inode, page, get_block, wbc,
+ handler);
/* Is the page fully outside i_size? (truncate in progress) */
offset = i_size & (PAGE_CACHE_SIZE-1);
@@ -2864,9 +2881,20 @@
* writes to that region are not written out to the file."
*/
zero_user_segment(page, offset, PAGE_CACHE_SIZE);
- return __block_write_full_page(inode, page, get_block, wbc);
+ return __block_write_full_page(inode, page, get_block, wbc, handler);
}
+/*
+ * The generic ->writepage function for buffer-backed address_spaces
+ */
+int block_write_full_page(struct page *page, get_block_t *get_block,
+ struct writeback_control *wbc)
+{
+ return block_write_full_page_endio(page, get_block, wbc,
+ end_buffer_async_write);
+}
+
+
sector_t generic_block_bmap(struct address_space *mapping, sector_t block,
get_block_t *get_block)
{
@@ -3335,9 +3363,11 @@
EXPORT_SYMBOL(block_sync_page);
EXPORT_SYMBOL(block_truncate_page);
EXPORT_SYMBOL(block_write_full_page);
+EXPORT_SYMBOL(block_write_full_page_endio);
EXPORT_SYMBOL(cont_write_begin);
EXPORT_SYMBOL(end_buffer_read_sync);
EXPORT_SYMBOL(end_buffer_write_sync);
+EXPORT_SYMBOL(end_buffer_async_write);
EXPORT_SYMBOL(file_fsync);
EXPORT_SYMBOL(generic_block_bmap);
EXPORT_SYMBOL(generic_cont_expand_simple);
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 6598400..9d1fb6e 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -15,7 +15,8 @@
fails to support it properly, as with Samba server versions prior to 3.3.2)
Fix "redzone overwritten" bug in cifs_put_tcon (CIFSTcon may allocate too
little memory for the "nativeFileSystem" field returned by the server
-during mount).
+during mount). Endian convert inode numbers if necessary (makes it easier
+to compare inode numbers on network files from big endian systems).
Version 1.56
------------
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 3fd3a9d..67bf93a 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -41,7 +41,7 @@
/* attach the data */
memcpy(payload, data, datalen);
- rcu_assign_pointer(key->payload.data, payload);
+ key->payload.data = payload;
ret = 0;
error:
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 38491fd..0d6d8b5 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -66,9 +66,6 @@
extern struct task_struct *oplockThread; /* remove sparse warning */
struct task_struct *oplockThread = NULL;
/* extern struct task_struct * dnotifyThread; remove sparse warning */
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-static struct task_struct *dnotifyThread = NULL;
-#endif
static const struct super_operations cifs_super_ops;
unsigned int CIFSMaxBufSize = CIFS_MAX_MSGSIZE;
module_param(CIFSMaxBufSize, int, 0);
@@ -316,6 +313,7 @@
cifs_inode->clientCanCacheAll = false;
cifs_inode->delete_pending = false;
cifs_inode->vfs_inode.i_blkbits = 14; /* 2**14 = CIFS_MAX_MSGSIZE */
+ cifs_inode->server_eof = 0;
/* Can not set i_flags here - they get immediately overwritten
to zero by the VFS */
@@ -1040,34 +1038,6 @@
return 0;
}
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-static int cifs_dnotify_thread(void *dummyarg)
-{
- struct list_head *tmp;
- struct TCP_Server_Info *server;
-
- do {
- if (try_to_freeze())
- continue;
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(15*HZ);
- /* check if any stuck requests that need
- to be woken up and wakeq so the
- thread can wake up and error out */
- read_lock(&cifs_tcp_ses_lock);
- list_for_each(tmp, &cifs_tcp_ses_list) {
- server = list_entry(tmp, struct TCP_Server_Info,
- tcp_ses_list);
- if (atomic_read(&server->inFlight))
- wake_up_all(&server->response_q);
- }
- read_unlock(&cifs_tcp_ses_lock);
- } while (!kthread_should_stop());
-
- return 0;
-}
-#endif
-
static int __init
init_cifs(void)
{
@@ -1144,21 +1114,8 @@
goto out_unregister_dfs_key_type;
}
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- dnotifyThread = kthread_run(cifs_dnotify_thread, NULL, "cifsdnotifyd");
- if (IS_ERR(dnotifyThread)) {
- rc = PTR_ERR(dnotifyThread);
- cERROR(1, ("error %d create dnotify thread", rc));
- goto out_stop_oplock_thread;
- }
-#endif
-
return 0;
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- out_stop_oplock_thread:
-#endif
- kthread_stop(oplockThread);
out_unregister_dfs_key_type:
#ifdef CONFIG_CIFS_DFS_UPCALL
unregister_key_type(&key_type_dns_resolver);
@@ -1196,9 +1153,6 @@
cifs_destroy_inodecache();
cifs_destroy_mids();
cifs_destroy_request_bufs();
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- kthread_stop(dnotifyThread);
-#endif
kthread_stop(oplockThread);
}
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 9fbf4df..df40ab6 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -350,7 +350,7 @@
bool invalidHandle:1; /* file closed via session abend */
bool messageMode:1; /* for pipes: message vs byte mode */
atomic_t wrtPending; /* handle in use - defer close */
- struct semaphore fh_sem; /* prevents reopen race after dead ses*/
+ struct mutex fh_mutex; /* prevents reopen race after dead ses*/
struct cifs_search_info srch_inf;
};
@@ -370,6 +370,7 @@
bool clientCanCacheAll:1; /* read and writebehind oplock */
bool oplockPending:1;
bool delete_pending:1; /* DELETE_ON_CLOSE is set */
+ u64 server_eof; /* current file size on server */
struct inode vfs_inode;
};
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index b370489..a785f69 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -2163,7 +2163,7 @@
__le32 Type;
__le64 DevMajor;
__le64 DevMinor;
- __u64 UniqueId;
+ __le64 UniqueId;
__le64 Permissions;
__le64 Nlinks;
} __attribute__((packed)) FILE_UNIX_BASIC_INFO; /* level 0x200 QPathInfo */
@@ -2308,7 +2308,7 @@
} __attribute__((packed));
struct file_internal_info {
- __u64 UniqueId; /* inode number */
+ __le64 UniqueId; /* inode number */
} __attribute__((packed)); /* level 0x3ee */
struct file_mode_info {
@@ -2338,7 +2338,7 @@
__le32 Type;
__le64 DevMajor;
__le64 DevMinor;
- __u64 UniqueId;
+ __le64 UniqueId;
__le64 Permissions;
__le64 Nlinks;
char FileName[1];
@@ -2386,7 +2386,7 @@
__le32 FileNameLength;
__le32 EaSize; /* EA size */
__le32 Reserved;
- __u64 UniqueId; /* inode num - le since Samba puts ino in low 32 bit*/
+ __le64 UniqueId; /* inode num - le since Samba puts ino in low 32 bit*/
char FileName[1];
} __attribute__((packed)) SEARCH_ID_FULL_DIR_INFO; /* level 0x105 FF rsp data */
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index bc09c99..a0845dc 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1626,6 +1626,8 @@
int smb_hdr_len;
int resp_buf_type = 0;
+ *nbytes = 0;
+
cFYI(1, ("write2 at %lld %d bytes", (long long)offset, count));
if (tcon->ses->capabilities & CAP_LARGE_FILES) {
@@ -1682,11 +1684,9 @@
cifs_stats_inc(&tcon->num_writes);
if (rc) {
cFYI(1, ("Send error Write2 = %d", rc));
- *nbytes = 0;
} else if (resp_buf_type == 0) {
/* presumably this can not happen, but best to be safe */
rc = -EIO;
- *nbytes = 0;
} else {
WRITE_RSP *pSMBr = (WRITE_RSP *)iov[0].iov_base;
*nbytes = le16_to_cpu(pSMBr->CountHigh);
@@ -3918,7 +3918,7 @@
}
pfinfo = (struct file_internal_info *)
(data_offset + (char *) &pSMBr->hdr.Protocol);
- *inode_number = pfinfo->UniqueId;
+ *inode_number = le64_to_cpu(pfinfo->UniqueId);
}
}
GetInodeNumOut:
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 0de3b561..bacdef1 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2214,9 +2214,58 @@
return rc;
}
+static void
+cleanup_volume_info(struct smb_vol **pvolume_info)
+{
+ struct smb_vol *volume_info;
+
+ if (!pvolume_info && !*pvolume_info)
+ return;
+
+ volume_info = *pvolume_info;
+ kzfree(volume_info->password);
+ kfree(volume_info->UNC);
+ kfree(volume_info->prepath);
+ kfree(volume_info);
+ *pvolume_info = NULL;
+ return;
+}
+
+#ifdef CONFIG_CIFS_DFS_UPCALL
+/* build_path_to_root returns full path to root when
+ * we do not have an exiting connection (tcon) */
+static char *
+build_unc_path_to_root(const struct smb_vol *volume_info,
+ const struct cifs_sb_info *cifs_sb)
+{
+ char *full_path;
+
+ int unc_len = strnlen(volume_info->UNC, MAX_TREE_SIZE + 1);
+ full_path = kmalloc(unc_len + cifs_sb->prepathlen + 1, GFP_KERNEL);
+ if (full_path == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ strncpy(full_path, volume_info->UNC, unc_len);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) {
+ int i;
+ for (i = 0; i < unc_len; i++) {
+ if (full_path[i] == '\\')
+ full_path[i] = '/';
+ }
+ }
+
+ if (cifs_sb->prepathlen)
+ strncpy(full_path + unc_len, cifs_sb->prepath,
+ cifs_sb->prepathlen);
+
+ full_path[unc_len + cifs_sb->prepathlen] = 0; /* add trailing null */
+ return full_path;
+}
+#endif
+
int
cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
- char *mount_data, const char *devname)
+ char *mount_data_global, const char *devname)
{
int rc = 0;
int xid;
@@ -2225,6 +2274,13 @@
struct cifsTconInfo *tcon = NULL;
struct TCP_Server_Info *srvTcp = NULL;
char *full_path;
+ char *mount_data = mount_data_global;
+#ifdef CONFIG_CIFS_DFS_UPCALL
+ struct dfs_info3_param *referrals = NULL;
+ unsigned int num_referrals = 0;
+try_mount_again:
+#endif
+ full_path = NULL;
xid = GetXid();
@@ -2371,11 +2427,9 @@
}
}
- /* check for null share name ie connect to dfs root */
if ((strchr(volume_info->UNC + 3, '\\') == NULL)
&& (strchr(volume_info->UNC + 3, '/') == NULL)) {
- /* rc = connect_to_dfs_path(...) */
- cFYI(1, ("DFS root not supported"));
+ cERROR(1, ("Missing share name"));
rc = -ENODEV;
goto mount_fail_check;
} else {
@@ -2392,7 +2446,7 @@
}
}
if (rc)
- goto mount_fail_check;
+ goto remote_path_check;
tcon->seal = volume_info->seal;
write_lock(&cifs_tcp_ses_lock);
list_add(&tcon->tcon_list, &pSesInfo->tcon_list);
@@ -2417,19 +2471,9 @@
/* BB FIXME fix time_gran to be larger for LANMAN sessions */
sb->s_time_gran = 100;
-mount_fail_check:
- /* on error free sesinfo and tcon struct if needed */
- if (rc) {
- /* If find_unc succeeded then rc == 0 so we can not end */
- /* up accidently freeing someone elses tcon struct */
- if (tcon)
- cifs_put_tcon(tcon);
- else if (pSesInfo)
- cifs_put_smb_ses(pSesInfo);
- else
- cifs_put_tcp_session(srvTcp);
- goto out;
- }
+ if (rc)
+ goto remote_path_check;
+
cifs_sb->tcon = tcon;
/* do not care if following two calls succeed - informational */
@@ -2461,7 +2505,9 @@
cifs_sb->rsize = min(cifs_sb->rsize,
(tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE));
- if (!rc && cifs_sb->prepathlen) {
+remote_path_check:
+ /* check if a whole path (including prepath) is not remote */
+ if (!rc && cifs_sb->prepathlen && tcon) {
/* build_path_to_root works only when we have a valid tcon */
full_path = cifs_build_path_to_root(cifs_sb);
if (full_path == NULL) {
@@ -2469,31 +2515,79 @@
goto mount_fail_check;
}
rc = is_path_accessible(xid, tcon, cifs_sb, full_path);
- if (rc) {
- cERROR(1, ("Path %s in not accessible: %d",
- full_path, rc));
+ if (rc != -EREMOTE) {
kfree(full_path);
goto mount_fail_check;
}
kfree(full_path);
}
+ /* get referral if needed */
+ if (rc == -EREMOTE) {
+#ifdef CONFIG_CIFS_DFS_UPCALL
+ /* convert forward to back slashes in prepath here if needed */
+ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0)
+ convert_delimiter(cifs_sb->prepath,
+ CIFS_DIR_SEP(cifs_sb));
+ full_path = build_unc_path_to_root(volume_info, cifs_sb);
+ if (IS_ERR(full_path)) {
+ rc = PTR_ERR(full_path);
+ goto mount_fail_check;
+ }
+
+ cFYI(1, ("Getting referral for: %s", full_path));
+ rc = get_dfs_path(xid, pSesInfo , full_path + 1,
+ cifs_sb->local_nls, &num_referrals, &referrals,
+ cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (!rc && num_referrals > 0) {
+ char *fake_devname = NULL;
+
+ if (mount_data != mount_data_global)
+ kfree(mount_data);
+ mount_data = cifs_compose_mount_options(
+ cifs_sb->mountdata, full_path + 1,
+ referrals, &fake_devname);
+ kfree(fake_devname);
+ free_dfs_info_array(referrals, num_referrals);
+
+ if (tcon)
+ cifs_put_tcon(tcon);
+ else if (pSesInfo)
+ cifs_put_smb_ses(pSesInfo);
+
+ cleanup_volume_info(&volume_info);
+ FreeXid(xid);
+ kfree(full_path);
+ goto try_mount_again;
+ }
+#else /* No DFS support, return error on mount */
+ rc = -EOPNOTSUPP;
+#endif
+ }
+
+mount_fail_check:
+ /* on error free sesinfo and tcon struct if needed */
+ if (rc) {
+ if (mount_data != mount_data_global)
+ kfree(mount_data);
+ /* If find_unc succeeded then rc == 0 so we can not end */
+ /* up accidently freeing someone elses tcon struct */
+ if (tcon)
+ cifs_put_tcon(tcon);
+ else if (pSesInfo)
+ cifs_put_smb_ses(pSesInfo);
+ else
+ cifs_put_tcp_session(srvTcp);
+ goto out;
+ }
+
/* volume_info->password is freed above when existing session found
(in which case it is not needed anymore) but when new sesion is created
the password ptr is put in the new session structure (in which case the
password will be freed at unmount time) */
out:
/* zero out password before freeing */
- if (volume_info) {
- if (volume_info->password != NULL) {
- memset(volume_info->password, 0,
- strlen(volume_info->password));
- kfree(volume_info->password);
- }
- kfree(volume_info->UNC);
- kfree(volume_info->prepath);
- kfree(volume_info);
- }
+ cleanup_volume_info(&volume_info);
FreeXid(xid);
return rc;
}
@@ -2673,8 +2767,7 @@
/* We look for obvious messed up bcc or strings in response so we do not go off
the end since (at least) WIN2K and Windows XP have a major bug in not null
terminating last Unicode string in response */
- if (ses->serverOS)
- kfree(ses->serverOS);
+ kfree(ses->serverOS);
ses->serverOS = kzalloc(2 * (len + 1),
GFP_KERNEL);
if (ses->serverOS == NULL)
@@ -2710,8 +2803,7 @@
len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
/* last string is not always null terminated
(for e.g. for Windows XP & 2000) */
- if (ses->serverDomain)
- kfree(ses->serverDomain);
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2*(len+1),
GFP_KERNEL);
@@ -2725,8 +2817,7 @@
ses->serverDomain[1+(2*len)] = 0;
} else { /* else no more room so create
dummy domain string */
- if (ses->serverDomain)
- kfree(ses->serverDomain);
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2, GFP_KERNEL);
}
@@ -2772,8 +2863,7 @@
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
- if (ses->serverDomain)
- kfree(ses->serverDomain);
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(len + 1,
GFP_KERNEL);
if (ses->serverDomain == NULL)
@@ -3013,8 +3103,7 @@
/* We look for obvious messed up bcc or strings in response so we do not go off
the end since (at least) WIN2K and Windows XP have a major bug in not null
terminating last Unicode string in response */
- if (ses->serverOS)
- kfree(ses->serverOS);
+ kfree(ses->serverOS);
ses->serverOS =
kzalloc(2 * (len + 1), GFP_KERNEL);
cifs_strfromUCS_le(ses->serverOS,
@@ -3086,8 +3175,7 @@
if (((long) bcc_ptr + len) - (long)
pByteArea(smb_buffer_response)
<= BCC(smb_buffer_response)) {
- if (ses->serverOS)
- kfree(ses->serverOS);
+ kfree(ses->serverOS);
ses->serverOS =
kzalloc(len + 1,
GFP_KERNEL);
@@ -3414,8 +3502,7 @@
/* We look for obvious messed up bcc or strings in response so we do not go off
the end since (at least) WIN2K and Windows XP have a major bug in not null
terminating last Unicode string in response */
- if (ses->serverOS)
- kfree(ses->serverOS);
+ kfree(ses->serverOS);
ses->serverOS =
kzalloc(2 * (len + 1), GFP_KERNEL);
cifs_strfromUCS_le(ses->serverOS,
@@ -3448,8 +3535,7 @@
if (remaining_words > 0) {
len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
/* last string not always null terminated (e.g. for Windows XP & 2000) */
- if (ses->serverDomain)
- kfree(ses->serverDomain);
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2 *
(len +
@@ -3476,13 +3562,11 @@
= 0;
} /* else no more room so create dummy domain string */
else {
- if (ses->serverDomain)
- kfree(ses->serverDomain);
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(2,GFP_KERNEL);
}
} else { /* no room so create dummy domain and NOS string */
- if (ses->serverDomain)
- kfree(ses->serverDomain);
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(2, GFP_KERNEL);
kfree(ses->serverNOS);
ses->serverNOS = kzalloc(2, GFP_KERNEL);
@@ -3492,8 +3576,7 @@
if (((long) bcc_ptr + len) -
(long) pByteArea(smb_buffer_response)
<= BCC(smb_buffer_response)) {
- if (ses->serverOS)
- kfree(ses->serverOS);
+ kfree(ses->serverOS);
ses->serverOS = kzalloc(len + 1, GFP_KERNEL);
strncpy(ses->serverOS,bcc_ptr, len);
@@ -3512,8 +3595,7 @@
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
- if (ses->serverDomain)
- kfree(ses->serverDomain);
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(len+1,
GFP_KERNEL);
@@ -3674,16 +3756,15 @@
BCC(smb_buffer_response)) {
kfree(tcon->nativeFileSystem);
tcon->nativeFileSystem =
- kzalloc(2*(length + 1), GFP_KERNEL);
- if (tcon->nativeFileSystem)
+ kzalloc((4 * length) + 2, GFP_KERNEL);
+ if (tcon->nativeFileSystem) {
cifs_strfromUCS_le(
tcon->nativeFileSystem,
(__le16 *) bcc_ptr,
length, nls_codepage);
- bcc_ptr += 2 * length;
- bcc_ptr[0] = 0; /* null terminate the string */
- bcc_ptr[1] = 0;
- bcc_ptr += 2;
+ cFYI(1, ("nativeFileSystem=%s",
+ tcon->nativeFileSystem));
+ }
}
/* else do not bother copying these information fields*/
} else {
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 54dce78..461750e 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -129,12 +129,62 @@
return full_path;
}
+static void
+cifs_fill_fileinfo(struct inode *newinode, __u16 fileHandle,
+ struct cifsTconInfo *tcon, bool write_only)
+{
+ int oplock = 0;
+ struct cifsFileInfo *pCifsFile;
+ struct cifsInodeInfo *pCifsInode;
+
+ pCifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
+
+ if (pCifsFile == NULL)
+ return;
+
+ if (oplockEnabled)
+ oplock = REQ_OPLOCK;
+
+ pCifsFile->netfid = fileHandle;
+ pCifsFile->pid = current->tgid;
+ pCifsFile->pInode = newinode;
+ pCifsFile->invalidHandle = false;
+ pCifsFile->closePend = false;
+ mutex_init(&pCifsFile->fh_mutex);
+ mutex_init(&pCifsFile->lock_mutex);
+ INIT_LIST_HEAD(&pCifsFile->llist);
+ atomic_set(&pCifsFile->wrtPending, 0);
+
+ /* set the following in open now
+ pCifsFile->pfile = file; */
+ write_lock(&GlobalSMBSeslock);
+ list_add(&pCifsFile->tlist, &tcon->openFileList);
+ pCifsInode = CIFS_I(newinode);
+ if (pCifsInode) {
+ /* if readable file instance put first in list*/
+ if (write_only)
+ list_add_tail(&pCifsFile->flist,
+ &pCifsInode->openFileList);
+ else
+ list_add(&pCifsFile->flist, &pCifsInode->openFileList);
+
+ if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
+ pCifsInode->clientCanCacheAll = true;
+ pCifsInode->clientCanCacheRead = true;
+ cFYI(1, ("Exclusive Oplock inode %p", newinode));
+ } else if ((oplock & 0xF) == OPLOCK_READ)
+ pCifsInode->clientCanCacheRead = true;
+ }
+ write_unlock(&GlobalSMBSeslock);
+}
+
int cifs_posix_open(char *full_path, struct inode **pinode,
struct super_block *sb, int mode, int oflags,
int *poplock, __u16 *pnetfid, int xid)
{
int rc;
__u32 oplock;
+ bool write_only = false;
FILE_UNIX_BASIC_INFO *presp_data;
__u32 posix_flags = 0;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
@@ -172,6 +222,8 @@
if (oflags & O_DIRECT)
posix_flags |= SMB_O_DIRECT;
+ if (!(oflags & FMODE_READ))
+ write_only = true;
rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode,
pnetfid, presp_data, &oplock, full_path,
@@ -187,8 +239,10 @@
if (!pinode)
goto posix_open_ret; /* caller does not need info */
- if (*pinode == NULL)
- *pinode = cifs_new_inode(sb, &presp_data->UniqueId);
+ if (*pinode == NULL) {
+ __u64 unique_id = le64_to_cpu(presp_data->UniqueId);
+ *pinode = cifs_new_inode(sb, &unique_id);
+ }
/* else an inode was passed in. Update its info, don't create one */
/* We do not need to close the file if new_inode fails since
@@ -198,6 +252,8 @@
posix_fill_in_inode(*pinode, presp_data, 1);
+ cifs_fill_fileinfo(*pinode, *pnetfid, cifs_sb->tcon, write_only);
+
posix_open_ret:
kfree(presp_data);
return rc;
@@ -239,7 +295,6 @@
char *full_path = NULL;
FILE_ALL_INFO *buf = NULL;
struct inode *newinode = NULL;
- struct cifsInodeInfo *pCifsInode;
int disposition = FILE_OVERWRITE_IF;
bool write_only = false;
@@ -410,44 +465,8 @@
/* mknod case - do not leave file open */
CIFSSMBClose(xid, tcon, fileHandle);
} else if (newinode) {
- struct cifsFileInfo *pCifsFile =
- kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
-
- if (pCifsFile == NULL)
- goto cifs_create_out;
- pCifsFile->netfid = fileHandle;
- pCifsFile->pid = current->tgid;
- pCifsFile->pInode = newinode;
- pCifsFile->invalidHandle = false;
- pCifsFile->closePend = false;
- init_MUTEX(&pCifsFile->fh_sem);
- mutex_init(&pCifsFile->lock_mutex);
- INIT_LIST_HEAD(&pCifsFile->llist);
- atomic_set(&pCifsFile->wrtPending, 0);
-
- /* set the following in open now
- pCifsFile->pfile = file; */
- write_lock(&GlobalSMBSeslock);
- list_add(&pCifsFile->tlist, &tcon->openFileList);
- pCifsInode = CIFS_I(newinode);
- if (pCifsInode) {
- /* if readable file instance put first in list*/
- if (write_only) {
- list_add_tail(&pCifsFile->flist,
- &pCifsInode->openFileList);
- } else {
- list_add(&pCifsFile->flist,
- &pCifsInode->openFileList);
- }
- if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
- pCifsInode->clientCanCacheAll = true;
- pCifsInode->clientCanCacheRead = true;
- cFYI(1, ("Exclusive Oplock inode %p",
- newinode));
- } else if ((oplock & 0xF) == OPLOCK_READ)
- pCifsInode->clientCanCacheRead = true;
- }
- write_unlock(&GlobalSMBSeslock);
+ cifs_fill_fileinfo(newinode, fileHandle,
+ cifs_sb->tcon, write_only);
}
cifs_create_out:
kfree(buf);
@@ -580,17 +599,21 @@
return rc;
}
-
struct dentry *
cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
struct nameidata *nd)
{
int xid;
int rc = 0; /* to get around spurious gcc warning, set to zero here */
+ int oplock = 0;
+ int mode;
+ __u16 fileHandle = 0;
+ bool posix_open = false;
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *pTcon;
struct inode *newInode = NULL;
char *full_path = NULL;
+ struct file *filp;
xid = GetXid();
@@ -632,12 +655,37 @@
}
cFYI(1, ("Full path: %s inode = 0x%p", full_path, direntry->d_inode));
- if (pTcon->unix_ext)
- rc = cifs_get_inode_info_unix(&newInode, full_path,
- parent_dir_inode->i_sb, xid);
- else
+ if (pTcon->unix_ext) {
+ if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
+ (nd->flags & LOOKUP_OPEN)) {
+ if (!((nd->intent.open.flags & O_CREAT) &&
+ (nd->intent.open.flags & O_EXCL))) {
+ mode = nd->intent.open.create_mode &
+ ~current_umask();
+ rc = cifs_posix_open(full_path, &newInode,
+ parent_dir_inode->i_sb, mode,
+ nd->intent.open.flags, &oplock,
+ &fileHandle, xid);
+ /*
+ * This code works around a bug in
+ * samba posix open in samba versions 3.3.1
+ * and earlier where create works
+ * but open fails with invalid parameter.
+ * If either of these error codes are
+ * returned, follow the normal lookup.
+ * Otherwise, the error during posix open
+ * is handled.
+ */
+ if ((rc != -EINVAL) && (rc != -EOPNOTSUPP))
+ posix_open = true;
+ }
+ }
+ if (!posix_open)
+ rc = cifs_get_inode_info_unix(&newInode, full_path,
+ parent_dir_inode->i_sb, xid);
+ } else
rc = cifs_get_inode_info(&newInode, full_path, NULL,
- parent_dir_inode->i_sb, xid, NULL);
+ parent_dir_inode->i_sb, xid, NULL);
if ((rc == 0) && (newInode != NULL)) {
if (pTcon->nocase)
@@ -645,7 +693,8 @@
else
direntry->d_op = &cifs_dentry_ops;
d_add(direntry, newInode);
-
+ if (posix_open)
+ filp = lookup_instantiate_filp(nd, direntry, NULL);
/* since paths are not looked up by component - the parent
directories are presumed to be good here */
renew_parental_timestamps(direntry);
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index 1e0c1bd..df4a306 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -78,7 +78,7 @@
}
key->type_data.x[0] = datalen;
- rcu_assign_pointer(key->payload.data, ip);
+ key->payload.data = ip;
return rc;
}
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 81747ac..50ca088 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -46,7 +46,7 @@
memset(private_data, 0, sizeof(struct cifsFileInfo));
private_data->netfid = netfid;
private_data->pid = current->tgid;
- init_MUTEX(&private_data->fh_sem);
+ mutex_init(&private_data->fh_mutex);
mutex_init(&private_data->lock_mutex);
INIT_LIST_HEAD(&private_data->llist);
private_data->pfile = file; /* needed for writepage */
@@ -284,35 +284,32 @@
cifs_sb = CIFS_SB(inode->i_sb);
tcon = cifs_sb->tcon;
- if (file->f_flags & O_CREAT) {
- /* search inode for this file and fill in file->private_data */
- pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
- read_lock(&GlobalSMBSeslock);
- list_for_each(tmp, &pCifsInode->openFileList) {
- pCifsFile = list_entry(tmp, struct cifsFileInfo,
- flist);
- if ((pCifsFile->pfile == NULL) &&
- (pCifsFile->pid == current->tgid)) {
- /* mode set in cifs_create */
+ /* search inode for this file and fill in file->private_data */
+ pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
+ read_lock(&GlobalSMBSeslock);
+ list_for_each(tmp, &pCifsInode->openFileList) {
+ pCifsFile = list_entry(tmp, struct cifsFileInfo,
+ flist);
+ if ((pCifsFile->pfile == NULL) &&
+ (pCifsFile->pid == current->tgid)) {
+ /* mode set in cifs_create */
- /* needed for writepage */
- pCifsFile->pfile = file;
+ /* needed for writepage */
+ pCifsFile->pfile = file;
- file->private_data = pCifsFile;
- break;
- }
- }
- read_unlock(&GlobalSMBSeslock);
- if (file->private_data != NULL) {
- rc = 0;
- FreeXid(xid);
- return rc;
- } else {
- if (file->f_flags & O_EXCL)
- cERROR(1, ("could not find file instance for "
- "new file %p", file));
+ file->private_data = pCifsFile;
+ break;
}
}
+ read_unlock(&GlobalSMBSeslock);
+
+ if (file->private_data != NULL) {
+ rc = 0;
+ FreeXid(xid);
+ return rc;
+ } else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL))
+ cERROR(1, ("could not find file instance for "
+ "new file %p", file));
full_path = build_path_from_dentry(file->f_path.dentry);
if (full_path == NULL) {
@@ -500,9 +497,9 @@
return -EBADF;
xid = GetXid();
- down(&pCifsFile->fh_sem);
+ mutex_unlock(&pCifsFile->fh_mutex);
if (!pCifsFile->invalidHandle) {
- up(&pCifsFile->fh_sem);
+ mutex_lock(&pCifsFile->fh_mutex);
FreeXid(xid);
return 0;
}
@@ -533,7 +530,7 @@
if (full_path == NULL) {
rc = -ENOMEM;
reopen_error_exit:
- up(&pCifsFile->fh_sem);
+ mutex_lock(&pCifsFile->fh_mutex);
FreeXid(xid);
return rc;
}
@@ -575,14 +572,14 @@
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc) {
- up(&pCifsFile->fh_sem);
+ mutex_lock(&pCifsFile->fh_mutex);
cFYI(1, ("cifs_open returned 0x%x", rc));
cFYI(1, ("oplock: %d", oplock));
} else {
reopen_success:
pCifsFile->netfid = netfid;
pCifsFile->invalidHandle = false;
- up(&pCifsFile->fh_sem);
+ mutex_lock(&pCifsFile->fh_mutex);
pCifsInode = CIFS_I(inode);
if (pCifsInode) {
if (can_flush) {
@@ -971,6 +968,40 @@
return rc;
}
+/*
+ * Set the timeout on write requests past EOF. For some servers (Windows)
+ * these calls can be very long.
+ *
+ * If we're writing >10M past the EOF we give a 180s timeout. Anything less
+ * than that gets a 45s timeout. Writes not past EOF get 15s timeouts.
+ * The 10M cutoff is totally arbitrary. A better scheme for this would be
+ * welcome if someone wants to suggest one.
+ *
+ * We may be able to do a better job with this if there were some way to
+ * declare that a file should be sparse.
+ */
+static int
+cifs_write_timeout(struct cifsInodeInfo *cifsi, loff_t offset)
+{
+ if (offset <= cifsi->server_eof)
+ return CIFS_STD_OP;
+ else if (offset > (cifsi->server_eof + (10 * 1024 * 1024)))
+ return CIFS_VLONG_OP;
+ else
+ return CIFS_LONG_OP;
+}
+
+/* update the file size (if needed) after a write */
+static void
+cifs_update_eof(struct cifsInodeInfo *cifsi, loff_t offset,
+ unsigned int bytes_written)
+{
+ loff_t end_of_write = offset + bytes_written;
+
+ if (end_of_write > cifsi->server_eof)
+ cifsi->server_eof = end_of_write;
+}
+
ssize_t cifs_user_write(struct file *file, const char __user *write_data,
size_t write_size, loff_t *poffset)
{
@@ -981,6 +1012,7 @@
struct cifsTconInfo *pTcon;
int xid, long_op;
struct cifsFileInfo *open_file;
+ struct cifsInodeInfo *cifsi = CIFS_I(file->f_path.dentry->d_inode);
cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
@@ -1000,11 +1032,7 @@
xid = GetXid();
- if (*poffset > file->f_path.dentry->d_inode->i_size)
- long_op = CIFS_VLONG_OP; /* writes past EOF take long time */
- else
- long_op = CIFS_LONG_OP;
-
+ long_op = cifs_write_timeout(cifsi, *poffset);
for (total_written = 0; write_size > total_written;
total_written += bytes_written) {
rc = -EAGAIN;
@@ -1048,8 +1076,10 @@
FreeXid(xid);
return rc;
}
- } else
+ } else {
+ cifs_update_eof(cifsi, *poffset, bytes_written);
*poffset += bytes_written;
+ }
long_op = CIFS_STD_OP; /* subsequent writes fast -
15 seconds is plenty */
}
@@ -1085,6 +1115,7 @@
struct cifsTconInfo *pTcon;
int xid, long_op;
struct cifsFileInfo *open_file;
+ struct cifsInodeInfo *cifsi = CIFS_I(file->f_path.dentry->d_inode);
cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
@@ -1099,11 +1130,7 @@
xid = GetXid();
- if (*poffset > file->f_path.dentry->d_inode->i_size)
- long_op = CIFS_VLONG_OP; /* writes past EOF can be slow */
- else
- long_op = CIFS_LONG_OP;
-
+ long_op = cifs_write_timeout(cifsi, *poffset);
for (total_written = 0; write_size > total_written;
total_written += bytes_written) {
rc = -EAGAIN;
@@ -1166,8 +1193,10 @@
FreeXid(xid);
return rc;
}
- } else
+ } else {
+ cifs_update_eof(cifsi, *poffset, bytes_written);
*poffset += bytes_written;
+ }
long_op = CIFS_STD_OP; /* subsequent writes fast -
15 seconds is plenty */
}
@@ -1380,11 +1409,12 @@
int nr_pages;
__u64 offset = 0;
struct cifsFileInfo *open_file;
+ struct cifsInodeInfo *cifsi = CIFS_I(mapping->host);
struct page *page;
struct pagevec pvec;
int rc = 0;
int scanned = 0;
- int xid;
+ int xid, long_op;
cifs_sb = CIFS_SB(mapping->host->i_sb);
@@ -1528,12 +1558,15 @@
cERROR(1, ("No writable handles for inode"));
rc = -EBADF;
} else {
+ long_op = cifs_write_timeout(cifsi, offset);
rc = CIFSSMBWrite2(xid, cifs_sb->tcon,
open_file->netfid,
bytes_to_write, offset,
&bytes_written, iov, n_iov,
- CIFS_LONG_OP);
+ long_op);
atomic_dec(&open_file->wrtPending);
+ cifs_update_eof(cifsi, offset, bytes_written);
+
if (rc || bytes_written < bytes_to_write) {
cERROR(1, ("Write2 ret %d, wrote %d",
rc, bytes_written));
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index f121a80..f36b4e4 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -143,6 +143,7 @@
inode->i_nlink = le64_to_cpu(info->Nlinks);
+ cifsInfo->server_eof = end_of_file;
spin_lock(&inode->i_lock);
if (is_size_safe_to_change(cifsInfo, end_of_file)) {
/*
@@ -276,7 +277,8 @@
/* get new inode */
if (*pinode == NULL) {
- *pinode = cifs_new_inode(sb, &find_data.UniqueId);
+ __u64 unique_id = le64_to_cpu(find_data.UniqueId);
+ *pinode = cifs_new_inode(sb, &unique_id);
if (*pinode == NULL) {
rc = -ENOMEM;
goto cgiiu_exit;
@@ -605,12 +607,12 @@
inode->i_mode |= S_IFREG;
}
+ cifsInfo->server_eof = le64_to_cpu(pfindData->EndOfFile);
spin_lock(&inode->i_lock);
- if (is_size_safe_to_change(cifsInfo,
- le64_to_cpu(pfindData->EndOfFile))) {
+ if (is_size_safe_to_change(cifsInfo, cifsInfo->server_eof)) {
/* can not safely shrink the file size here if the
client is writing to it due to potential races */
- i_size_write(inode, le64_to_cpu(pfindData->EndOfFile));
+ i_size_write(inode, cifsInfo->server_eof);
/* 512 bytes (2**9) is the fake blocksize that must be
used for this calculation */
@@ -1138,6 +1140,7 @@
cFYI(1, ("posix mkdir returned 0x%x", rc));
d_drop(direntry);
} else {
+ __u64 unique_id;
if (pInfo->Type == cpu_to_le32(-1)) {
/* no return info, go query for it */
kfree(pInfo);
@@ -1151,8 +1154,8 @@
else
direntry->d_op = &cifs_dentry_ops;
- newinode = cifs_new_inode(inode->i_sb,
- &pInfo->UniqueId);
+ unique_id = le64_to_cpu(pInfo->UniqueId);
+ newinode = cifs_new_inode(inode->i_sb, &unique_id);
if (newinode == NULL) {
kfree(pInfo);
goto mkdir_get_info;
@@ -1450,7 +1453,8 @@
checking the UniqueId via FILE_INTERNAL_INFO */
unlink_target:
- if ((rc == -EACCES) || (rc == -EEXIST)) {
+ /* Try unlinking the target dentry if it's not negative */
+ if (target_dentry->d_inode && (rc == -EACCES || rc == -EEXIST)) {
tmprc = cifs_unlink(target_dir, target_dentry);
if (tmprc)
goto cifs_rename_exit;
@@ -1753,6 +1757,7 @@
}
if (rc == 0) {
+ cifsInode->server_eof = attrs->ia_size;
rc = cifs_vmtruncate(inode, attrs->ia_size);
cifs_truncate_page(inode->i_mapping, inode->i_size);
}
@@ -1792,20 +1797,21 @@
goto out;
}
- if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
- /*
- Flush data before changing file size or changing the last
- write time of the file on the server. If the
- flush returns error, store it to report later and continue.
- BB: This should be smarter. Why bother flushing pages that
- will be truncated anyway? Also, should we error out here if
- the flush returns error?
- */
- rc = filemap_write_and_wait(inode->i_mapping);
- if (rc != 0) {
- cifsInode->write_behind_rc = rc;
- rc = 0;
- }
+ /*
+ * Attempt to flush data before changing attributes. We need to do
+ * this for ATTR_SIZE and ATTR_MTIME for sure, and if we change the
+ * ownership or mode then we may also need to do this. Here, we take
+ * the safe way out and just do the flush on all setattr requests. If
+ * the flush returns error, store it to report later and continue.
+ *
+ * BB: This should be smarter. Why bother flushing pages that
+ * will be truncated anyway? Also, should we error out here if
+ * the flush returns error?
+ */
+ rc = filemap_write_and_wait(inode->i_mapping);
+ if (rc != 0) {
+ cifsInode->write_behind_rc = rc;
+ rc = 0;
}
if (attrs->ia_valid & ATTR_SIZE) {
@@ -1903,20 +1909,21 @@
return -ENOMEM;
}
- if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
- /*
- Flush data before changing file size or changing the last
- write time of the file on the server. If the
- flush returns error, store it to report later and continue.
- BB: This should be smarter. Why bother flushing pages that
- will be truncated anyway? Also, should we error out here if
- the flush returns error?
- */
- rc = filemap_write_and_wait(inode->i_mapping);
- if (rc != 0) {
- cifsInode->write_behind_rc = rc;
- rc = 0;
- }
+ /*
+ * Attempt to flush data before changing attributes. We need to do
+ * this for ATTR_SIZE and ATTR_MTIME for sure, and if we change the
+ * ownership or mode then we may also need to do this. Here, we take
+ * the safe way out and just do the flush on all setattr requests. If
+ * the flush returns error, store it to report later and continue.
+ *
+ * BB: This should be smarter. Why bother flushing pages that
+ * will be truncated anyway? Also, should we error out here if
+ * the flush returns error?
+ */
+ rc = filemap_write_and_wait(inode->i_mapping);
+ if (rc != 0) {
+ cifsInode->write_behind_rc = rc;
+ rc = 0;
}
if (attrs->ia_valid & ATTR_SIZE) {
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index c2c01ff..1a8be62 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -239,6 +239,7 @@
if (atomic_read(&cifsInfo->inUse) == 0)
atomic_set(&cifsInfo->inUse, 1);
+ cifsInfo->server_eof = end_of_file;
spin_lock(&tmp_inode->i_lock);
if (is_size_safe_to_change(cifsInfo, end_of_file)) {
/* can not safely change the file size here if the
@@ -375,6 +376,7 @@
tmp_inode->i_gid = le64_to_cpu(pfindData->Gid);
tmp_inode->i_nlink = le64_to_cpu(pfindData->Nlinks);
+ cifsInfo->server_eof = end_of_file;
spin_lock(&tmp_inode->i_lock);
if (is_size_safe_to_change(cifsInfo, end_of_file)) {
/* can not safely change the file size here if the
@@ -840,7 +842,7 @@
len = strnlen(filename, PATH_MAX);
}
- *pinum = pFindData->UniqueId;
+ *pinum = le64_to_cpu(pFindData->UniqueId);
} else if (level == SMB_FIND_FILE_DIRECTORY_INFO) {
FILE_DIRECTORY_INFO *pFindData =
(FILE_DIRECTORY_INFO *)current_entry;
@@ -856,7 +858,7 @@
(SEARCH_ID_FULL_DIR_INFO *)current_entry;
filename = &pFindData->FileName[0];
len = le32_to_cpu(pFindData->FileNameLength);
- *pinum = pFindData->UniqueId;
+ *pinum = le64_to_cpu(pFindData->UniqueId);
} else if (level == SMB_FIND_FILE_BOTH_DIRECTORY_INFO) {
FILE_BOTH_DIRECTORY_INFO *pFindData =
(FILE_BOTH_DIRECTORY_INFO *)current_entry;
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 5c68b42..c652c73 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -285,35 +285,36 @@
int words_left, len;
char *data = *pbcc_area;
-
-
cFYI(1, ("bleft %d", bleft));
-
- /* SMB header is unaligned, so cifs servers word align start of
- Unicode strings */
- data++;
- bleft--; /* Windows servers do not always double null terminate
- their final Unicode string - in which case we
- now will not attempt to decode the byte of junk
- which follows it */
+ /*
+ * Windows servers do not always double null terminate their final
+ * Unicode string. Check to see if there are an uneven number of bytes
+ * left. If so, then add an extra NULL pad byte to the end of the
+ * response.
+ *
+ * See section 2.7.2 in "Implementing CIFS" for details
+ */
+ if (bleft % 2) {
+ data[bleft] = 0;
+ ++bleft;
+ }
words_left = bleft / 2;
/* save off server operating system */
len = UniStrnlen((wchar_t *) data, words_left);
-/* We look for obvious messed up bcc or strings in response so we do not go off
- the end since (at least) WIN2K and Windows XP have a major bug in not null
- terminating last Unicode string in response */
if (len >= words_left)
return rc;
kfree(ses->serverOS);
/* UTF-8 string will not grow more than four times as big as UCS-16 */
ses->serverOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
- if (ses->serverOS != NULL)
+ if (ses->serverOS != NULL) {
cifs_strfromUCS_le(ses->serverOS, (__le16 *)data, len, nls_cp);
+ cFYI(1, ("serverOS=%s", ses->serverOS));
+ }
data += 2 * (len + 1);
words_left -= len + 1;
@@ -328,6 +329,7 @@
if (ses->serverNOS != NULL) {
cifs_strfromUCS_le(ses->serverNOS, (__le16 *)data, len,
nls_cp);
+ cFYI(1, ("serverNOS=%s", ses->serverNOS));
if (strncmp(ses->serverNOS, "NT LAN Manager 4", 16) == 0) {
cFYI(1, ("NT4 server"));
ses->flags |= CIFS_SES_NT4;
@@ -343,12 +345,11 @@
return rc;
kfree(ses->serverDomain);
- ses->serverDomain = kzalloc(2 * (len + 1), GFP_KERNEL); /* BB FIXME wrong length */
+ ses->serverDomain = kzalloc((4 * len) + 2, GFP_KERNEL);
if (ses->serverDomain != NULL) {
cifs_strfromUCS_le(ses->serverDomain, (__le16 *)data, len,
nls_cp);
- ses->serverDomain[2*len] = 0;
- ses->serverDomain[(2*len) + 1] = 0;
+ cFYI(1, ("serverDomain=%s", ses->serverDomain));
}
data += 2 * (len + 1);
words_left -= len + 1;
@@ -702,12 +703,18 @@
}
/* BB check if Unicode and decode strings */
- if (smb_buf->Flags2 & SMBFLG2_UNICODE)
+ if (smb_buf->Flags2 & SMBFLG2_UNICODE) {
+ /* unicode string area must be word-aligned */
+ if (((unsigned long) bcc_ptr - (unsigned long) smb_buf) % 2) {
+ ++bcc_ptr;
+ --bytes_remaining;
+ }
rc = decode_unicode_ssetup(&bcc_ptr, bytes_remaining,
- ses, nls_cp);
- else
+ ses, nls_cp);
+ } else {
rc = decode_ascii_ssetup(&bcc_ptr, bytes_remaining,
ses, nls_cp);
+ }
ssetup_exit:
if (spnego_key) {
diff --git a/fs/compat.c b/fs/compat.c
index 3f84d5f..681ed81 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -181,22 +181,24 @@
struct compat_stat __user *statbuf)
{
struct kstat stat;
- int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
+ int error;
- if (!error)
- error = cp_compat_stat(&stat, statbuf);
- return error;
+ error = vfs_stat(filename, &stat);
+ if (error)
+ return error;
+ return cp_compat_stat(&stat, statbuf);
}
asmlinkage long compat_sys_newlstat(char __user * filename,
struct compat_stat __user *statbuf)
{
struct kstat stat;
- int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
+ int error;
- if (!error)
- error = cp_compat_stat(&stat, statbuf);
- return error;
+ error = vfs_lstat(filename, &stat);
+ if (error)
+ return error;
+ return cp_compat_stat(&stat, statbuf);
}
#ifndef __ARCH_WANT_STAT64
@@ -204,21 +206,12 @@
struct compat_stat __user *statbuf, int flag)
{
struct kstat stat;
- int error = -EINVAL;
+ int error;
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_compat_stat(&stat, statbuf);
-
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_compat_stat(&stat, statbuf);
}
#endif
@@ -1483,6 +1476,7 @@
struct linux_binprm *bprm;
struct file *file;
struct files_struct *displaced;
+ bool clear_in_exec;
int retval;
retval = unshare_files(&displaced);
@@ -1505,8 +1499,9 @@
goto out_unlock;
retval = check_unsafe_exec(bprm);
- if (retval)
+ if (retval < 0)
goto out_unlock;
+ clear_in_exec = retval;
file = open_exec(filename);
retval = PTR_ERR(file);
@@ -1553,9 +1548,7 @@
goto out;
/* execve succeeded */
- write_lock(¤t->fs->lock);
current->fs->in_exec = 0;
- write_unlock(¤t->fs->lock);
current->in_execve = 0;
mutex_unlock(¤t->cred_exec_mutex);
acct_update_integrals(current);
@@ -1575,9 +1568,8 @@
}
out_unmark:
- write_lock(¤t->fs->lock);
- current->fs->in_exec = 0;
- write_unlock(¤t->fs->lock);
+ if (clear_in_exec)
+ current->fs->in_exec = 0;
out_unlock:
current->in_execve = 0;
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 3e87ce4..b83f6bc 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -58,7 +58,6 @@
#include <linux/i2c.h>
#include <linux/i2c-dev.h>
#include <linux/atalk.h>
-#include <linux/loop.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci.h>
@@ -68,6 +67,7 @@
#include <linux/gigaset_dev.h>
#ifdef CONFIG_BLOCK
+#include <linux/loop.h>
#include <scsi/scsi.h>
#include <scsi/scsi_ioctl.h>
#include <scsi/sg.h>
@@ -2660,6 +2660,8 @@
HANDLE_IOCTL(SONET_GETFRSENSE, do_atm_ioctl)
/* block stuff */
#ifdef CONFIG_BLOCK
+/* loop */
+IGNORE_IOCTL(LOOP_CLR_FD)
/* Raw devices */
HANDLE_IOCTL(RAW_SETBIND, raw_ioctl)
HANDLE_IOCTL(RAW_GETBIND, raw_ioctl)
@@ -2728,9 +2730,6 @@
IGNORE_IOCTL(VFAT_IOCTL_READDIR_BOTH32)
IGNORE_IOCTL(VFAT_IOCTL_READDIR_SHORT32)
-/* loop */
-IGNORE_IOCTL(LOOP_CLR_FD)
-
#ifdef CONFIG_SPARC
/* Sparc framebuffers, handled in sbusfb_compat_ioctl() */
IGNORE_IOCTL(FBIOGTYPE)
diff --git a/fs/dcache.c b/fs/dcache.c
index 761d30b..1fcffeb 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -2149,7 +2149,6 @@
int result;
unsigned long seq;
- /* FIXME: This is old behavior, needed? Please check callers. */
if (new_dentry == old_dentry)
return 1;
diff --git a/fs/direct-io.c b/fs/direct-io.c
index da258e7..05763bb 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -307,8 +307,6 @@
struct bio *bio;
bio = bio_alloc(GFP_KERNEL, nr_vecs);
- if (bio == NULL)
- return -ENOMEM;
bio->bi_bdev = bdev;
bio->bi_sector = first_sector;
diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c
index a67fea6..dda3c58 100644
--- a/fs/ecryptfs/miscdev.c
+++ b/fs/ecryptfs/miscdev.c
@@ -418,18 +418,13 @@
if (count == 0)
goto out;
- data = kmalloc(count, GFP_KERNEL);
- if (!data) {
- printk(KERN_ERR "%s: Out of memory whilst attempting to "
- "kmalloc([%zd], GFP_KERNEL)\n", __func__, count);
+
+ data = memdup_user(buf, count);
+ if (IS_ERR(data)) {
+ printk(KERN_ERR "%s: memdup_user returned error [%ld]\n",
+ __func__, PTR_ERR(data));
goto out;
}
- rc = copy_from_user(data, buf, count);
- if (rc) {
- printk(KERN_ERR "%s: copy_from_user returned error [%d]\n",
- __func__, rc);
- goto out_free;
- }
sz = count;
i = 0;
switch (data[i++]) {
diff --git a/fs/exec.c b/fs/exec.c
index 052a961..a3a8ce8 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1060,7 +1060,6 @@
int check_unsafe_exec(struct linux_binprm *bprm)
{
struct task_struct *p = current, *t;
- unsigned long flags;
unsigned n_fs;
int res = 0;
@@ -1068,21 +1067,22 @@
n_fs = 1;
write_lock(&p->fs->lock);
- lock_task_sighand(p, &flags);
+ rcu_read_lock();
for (t = next_thread(p); t != p; t = next_thread(t)) {
if (t->fs == p->fs)
n_fs++;
}
+ rcu_read_unlock();
if (p->fs->users > n_fs) {
bprm->unsafe |= LSM_UNSAFE_SHARE;
} else {
- if (p->fs->in_exec)
- res = -EAGAIN;
- p->fs->in_exec = 1;
+ res = -EAGAIN;
+ if (!p->fs->in_exec) {
+ p->fs->in_exec = 1;
+ res = 1;
+ }
}
-
- unlock_task_sighand(p, &flags);
write_unlock(&p->fs->lock);
return res;
@@ -1284,6 +1284,7 @@
struct linux_binprm *bprm;
struct file *file;
struct files_struct *displaced;
+ bool clear_in_exec;
int retval;
retval = unshare_files(&displaced);
@@ -1306,8 +1307,9 @@
goto out_unlock;
retval = check_unsafe_exec(bprm);
- if (retval)
+ if (retval < 0)
goto out_unlock;
+ clear_in_exec = retval;
file = open_exec(filename);
retval = PTR_ERR(file);
@@ -1355,9 +1357,7 @@
goto out;
/* execve succeeded */
- write_lock(¤t->fs->lock);
current->fs->in_exec = 0;
- write_unlock(¤t->fs->lock);
current->in_execve = 0;
mutex_unlock(¤t->cred_exec_mutex);
acct_update_integrals(current);
@@ -1377,9 +1377,8 @@
}
out_unmark:
- write_lock(¤t->fs->lock);
- current->fs->in_exec = 0;
- write_unlock(¤t->fs->lock);
+ if (clear_in_exec)
+ current->fs->in_exec = 0;
out_unlock:
current->in_execve = 0;
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index b43b9556..acf67883 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -590,9 +590,8 @@
if (depth == 0)
return (err);
-reread:
- partial = ext2_get_branch(inode, depth, offsets, chain, &err);
+ partial = ext2_get_branch(inode, depth, offsets, chain, &err);
/* Simplest case - block found, no allocation needed */
if (!partial) {
first_block = le32_to_cpu(chain[depth - 1].key);
@@ -602,15 +601,16 @@
while (count < maxblocks && count <= blocks_to_boundary) {
ext2_fsblk_t blk;
- if (!verify_chain(chain, partial)) {
+ if (!verify_chain(chain, chain + depth - 1)) {
/*
* Indirect block might be removed by
* truncate while we were reading it.
* Handling of that case: forget what we've
* got now, go to reread.
*/
+ err = -EAGAIN;
count = 0;
- goto changed;
+ break;
}
blk = le32_to_cpu(*(chain[depth-1].p + count));
if (blk == first_block + count)
@@ -618,7 +618,8 @@
else
break;
}
- goto got_it;
+ if (err != -EAGAIN)
+ goto got_it;
}
/* Next simple case - plain lookup or failed read of indirect block */
@@ -626,6 +627,33 @@
goto cleanup;
mutex_lock(&ei->truncate_mutex);
+ /*
+ * If the indirect block is missing while we are reading
+ * the chain(ext3_get_branch() returns -EAGAIN err), or
+ * if the chain has been changed after we grab the semaphore,
+ * (either because another process truncated this branch, or
+ * another get_block allocated this branch) re-grab the chain to see if
+ * the request block has been allocated or not.
+ *
+ * Since we already block the truncate/other get_block
+ * at this point, we will have the current copy of the chain when we
+ * splice the branch into the tree.
+ */
+ if (err == -EAGAIN || !verify_chain(chain, partial)) {
+ while (partial > chain) {
+ brelse(partial->bh);
+ partial--;
+ }
+ partial = ext2_get_branch(inode, depth, offsets, chain, &err);
+ if (!partial) {
+ count++;
+ mutex_unlock(&ei->truncate_mutex);
+ if (err)
+ goto cleanup;
+ clear_buffer_new(bh_result);
+ goto got_it;
+ }
+ }
/*
* Okay, we need to do block allocation. Lazily initialize the block
@@ -683,12 +711,6 @@
partial--;
}
return err;
-changed:
- while (partial > chain) {
- brelse(partial->bh);
- partial--;
- }
- goto reread;
}
int ext2_get_block(struct inode *inode, sector_t iblock, struct buffer_head *bh_result, int create)
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 6132353..2a1cb09 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2416,8 +2416,6 @@
len = ee_len;
bio = bio_alloc(GFP_NOIO, len);
- if (!bio)
- return -ENOMEM;
bio->bi_sector = ee_pblock;
bio->bi_bdev = inode->i_sb->s_bdev;
diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig
index d0a69ff..182f9ff 100644
--- a/fs/fat/Kconfig
+++ b/fs/fat/Kconfig
@@ -95,3 +95,6 @@
Note that "utf8" is not recommended for FAT filesystems.
If unsure, you shouldn't set "utf8" here.
See <file:Documentation/filesystems/vfat.txt> for more information.
+
+ Enable any character sets you need in File Systems/Native Language
+ Support.
diff --git a/fs/filesystems.c b/fs/filesystems.c
index 1aa7026..a24c58e 100644
--- a/fs/filesystems.c
+++ b/fs/filesystems.c
@@ -199,7 +199,7 @@
return retval;
}
-int get_filesystem_list(char * buf)
+int __init get_filesystem_list(char *buf)
{
int len = 0;
struct file_system_type * tmp;
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 2b25133..06f30e9 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -938,9 +938,9 @@
}
static int fuse_get_user_pages(struct fuse_req *req, const char __user *buf,
- unsigned *nbytesp, int write)
+ size_t *nbytesp, int write)
{
- unsigned nbytes = *nbytesp;
+ size_t nbytes = *nbytesp;
unsigned long user_addr = (unsigned long) buf;
unsigned offset = user_addr & ~PAGE_MASK;
int npages;
@@ -955,7 +955,7 @@
return 0;
}
- nbytes = min(nbytes, (unsigned) FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT);
+ nbytes = min_t(size_t, nbytes, FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT);
npages = (nbytes + offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
npages = clamp(npages, 1, FUSE_MAX_PAGES_PER_REQ);
down_read(¤t->mm->mmap_sem);
@@ -1298,6 +1298,8 @@
if (vma->vm_flags & VM_MAYSHARE)
return -ENODEV;
+ invalidate_inode_pages2(file->f_mapping);
+
return generic_file_mmap(file, vma);
}
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 3984e47..1afd9f2 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -597,7 +597,6 @@
GLOCK_BUG_ON(gl, test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags));
- down_read(&gfs2_umount_flush_sem);
if (test_bit(GLF_DEMOTE, &gl->gl_flags) &&
gl->gl_demote_state != gl->gl_state) {
if (find_first_holder(gl))
@@ -614,15 +613,14 @@
if (ret == 0)
goto out_unlock;
if (ret == 2)
- goto out_sem;
+ goto out;
gh = find_first_waiter(gl);
gl->gl_target = gh->gh_state;
if (!(gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)))
do_error(gl, 0); /* Fail queued try locks */
}
do_xmote(gl, gh, gl->gl_target);
-out_sem:
- up_read(&gfs2_umount_flush_sem);
+out:
return;
out_sched:
@@ -631,7 +629,7 @@
gfs2_glock_put(gl);
out_unlock:
clear_bit(GLF_LOCK, &gl->gl_flags);
- goto out_sem;
+ goto out;
}
static void glock_work_func(struct work_struct *work)
@@ -641,6 +639,7 @@
if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags))
finish_xmote(gl, gl->gl_reply);
+ down_read(&gfs2_umount_flush_sem);
spin_lock(&gl->gl_spin);
if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
gl->gl_state != LM_ST_UNLOCKED &&
@@ -653,6 +652,7 @@
}
run_queue(gl, 0);
spin_unlock(&gl->gl_spin);
+ up_read(&gfs2_umount_flush_sem);
if (!delay ||
queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0)
gfs2_glock_put(gl);
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index bf23a62..70f87f4 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -156,6 +156,12 @@
error = filemap_fdatawait(metamapping);
mapping_set_error(metamapping, error);
gfs2_ail_empty_gl(gl);
+ /*
+ * Writeback of the data mapping may cause the dirty flag to be set
+ * so we have to clear it again here.
+ */
+ smp_mb__before_clear_bit();
+ clear_bit(GLF_DIRTY, &gl->gl_flags);
}
/**
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 7b277d44..5a31d42 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -137,15 +137,15 @@
if (S_ISREG(mode)) {
inode->i_op = &gfs2_file_iops;
if (gfs2_localflocks(sdp))
- inode->i_fop = gfs2_file_fops_nolock;
+ inode->i_fop = &gfs2_file_fops_nolock;
else
- inode->i_fop = gfs2_file_fops;
+ inode->i_fop = &gfs2_file_fops;
} else if (S_ISDIR(mode)) {
inode->i_op = &gfs2_dir_iops;
if (gfs2_localflocks(sdp))
- inode->i_fop = gfs2_dir_fops_nolock;
+ inode->i_fop = &gfs2_dir_fops_nolock;
else
- inode->i_fop = gfs2_dir_fops;
+ inode->i_fop = &gfs2_dir_fops;
} else if (S_ISLNK(mode)) {
inode->i_op = &gfs2_symlink_iops;
} else {
diff --git a/fs/gfs2/inode.h b/fs/gfs2/inode.h
index dca4fee..c30be2b 100644
--- a/fs/gfs2/inode.h
+++ b/fs/gfs2/inode.h
@@ -101,21 +101,23 @@
extern const struct inode_operations gfs2_file_iops;
extern const struct inode_operations gfs2_dir_iops;
extern const struct inode_operations gfs2_symlink_iops;
-extern const struct file_operations *gfs2_file_fops_nolock;
-extern const struct file_operations *gfs2_dir_fops_nolock;
+extern const struct file_operations gfs2_file_fops_nolock;
+extern const struct file_operations gfs2_dir_fops_nolock;
extern void gfs2_set_inode_flags(struct inode *inode);
#ifdef CONFIG_GFS2_FS_LOCKING_DLM
-extern const struct file_operations *gfs2_file_fops;
-extern const struct file_operations *gfs2_dir_fops;
+extern const struct file_operations gfs2_file_fops;
+extern const struct file_operations gfs2_dir_fops;
+
static inline int gfs2_localflocks(const struct gfs2_sbd *sdp)
{
return sdp->sd_args.ar_localflocks;
}
#else /* Single node only */
-#define gfs2_file_fops NULL
-#define gfs2_dir_fops NULL
+#define gfs2_file_fops gfs2_file_fops_nolock
+#define gfs2_dir_fops gfs2_dir_fops_nolock
+
static inline int gfs2_localflocks(const struct gfs2_sbd *sdp)
{
return 1;
diff --git a/fs/gfs2/ops_file.c b/fs/gfs2/ops_file.c
index 70b9b85..5d82e91 100644
--- a/fs/gfs2/ops_file.c
+++ b/fs/gfs2/ops_file.c
@@ -413,7 +413,9 @@
gfs2_glock_dq(&gh);
out:
gfs2_holder_uninit(&gh);
- if (ret)
+ if (ret == -ENOMEM)
+ ret = VM_FAULT_OOM;
+ else if (ret)
ret = VM_FAULT_SIGBUS;
return ret;
}
@@ -705,7 +707,7 @@
}
}
-const struct file_operations *gfs2_file_fops = &(const struct file_operations){
+const struct file_operations gfs2_file_fops = {
.llseek = gfs2_llseek,
.read = do_sync_read,
.aio_read = generic_file_aio_read,
@@ -723,7 +725,7 @@
.setlease = gfs2_setlease,
};
-const struct file_operations *gfs2_dir_fops = &(const struct file_operations){
+const struct file_operations gfs2_dir_fops = {
.readdir = gfs2_readdir,
.unlocked_ioctl = gfs2_ioctl,
.open = gfs2_open,
@@ -735,7 +737,7 @@
#endif /* CONFIG_GFS2_FS_LOCKING_DLM */
-const struct file_operations *gfs2_file_fops_nolock = &(const struct file_operations){
+const struct file_operations gfs2_file_fops_nolock = {
.llseek = gfs2_llseek,
.read = do_sync_read,
.aio_read = generic_file_aio_read,
@@ -751,7 +753,7 @@
.setlease = generic_setlease,
};
-const struct file_operations *gfs2_dir_fops_nolock = &(const struct file_operations){
+const struct file_operations gfs2_dir_fops_nolock = {
.readdir = gfs2_readdir,
.unlocked_ioctl = gfs2_ioctl,
.open = gfs2_open,
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 51883b3..650a730 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -272,11 +272,6 @@
lock_page(page);
bio = bio_alloc(GFP_NOFS, 1);
- if (unlikely(!bio)) {
- __free_page(page);
- return -ENOBUFS;
- }
-
bio->bi_sector = sector * (sb->s_blocksize >> 9);
bio->bi_bdev = sb->s_bdev;
bio_add_page(bio, page, PAGE_SIZE, 0);
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
index abd5429..1c70fa5 100644
--- a/fs/gfs2/ops_inode.c
+++ b/fs/gfs2/ops_inode.c
@@ -371,6 +371,7 @@
ip = ghs[1].gh_gl->gl_object;
ip->i_disksize = size;
+ i_size_write(inode, size);
error = gfs2_meta_inode_buffer(ip, &dibh);
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 8d53f66..152e6c4 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -81,7 +81,7 @@
static LIST_HEAD(qd_lru_list);
static atomic_t qd_lru_count = ATOMIC_INIT(0);
-static spinlock_t qd_lru_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(qd_lru_lock);
int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask)
{
@@ -1364,7 +1364,7 @@
refrigerator();
t = min(quotad_timeo, statfs_timeo);
- prepare_to_wait(&sdp->sd_quota_wait, &wait, TASK_UNINTERRUPTIBLE);
+ prepare_to_wait(&sdp->sd_quota_wait, &wait, TASK_INTERRUPTIBLE);
spin_lock(&sdp->sd_trunc_lock);
empty = list_empty(&sdp->sd_trunc_list);
spin_unlock(&sdp->sd_trunc_lock);
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index 9435dda..a1cbff2 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -70,6 +70,10 @@
BUG();
return 0;
}
+
+ if (!tree)
+ return 0;
+
if (tree->node_size >= PAGE_CACHE_SIZE) {
nidx = page->index >> (tree->node_size_shift - PAGE_CACHE_SHIFT);
spin_lock(&tree->hash_lock);
diff --git a/fs/hfs/mdb.c b/fs/hfs/mdb.c
index 36ca2e1..7b6165f 100644
--- a/fs/hfs/mdb.c
+++ b/fs/hfs/mdb.c
@@ -349,6 +349,7 @@
if (HFS_SB(sb)->nls_disk)
unload_nls(HFS_SB(sb)->nls_disk);
+ free_pages((unsigned long)HFS_SB(sb)->bitmap, PAGE_SIZE < 8192 ? 1 : 0);
kfree(HFS_SB(sb));
sb->s_fs_info = NULL;
}
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 23a3c76..153d968 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -26,7 +26,6 @@
#include <linux/pagevec.h>
#include <linux/parser.h>
#include <linux/mman.h>
-#include <linux/quotaops.h>
#include <linux/slab.h>
#include <linux/dnotify.h>
#include <linux/statfs.h>
@@ -842,7 +841,7 @@
bad_val:
printk(KERN_ERR "hugetlbfs: Bad value '%s' for mount option '%s'\n",
args[0].from, p);
- return 1;
+ return -EINVAL;
}
static int
diff --git a/fs/inode.c b/fs/inode.c
index d06d6d2..6ad14a1 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1470,42 +1470,6 @@
spin_lock(&inode_lock);
}
-/*
- * We rarely want to lock two inodes that do not have a parent/child
- * relationship (such as directory, child inode) simultaneously. The
- * vast majority of file systems should be able to get along fine
- * without this. Do not use these functions except as a last resort.
- */
-void inode_double_lock(struct inode *inode1, struct inode *inode2)
-{
- if (inode1 == NULL || inode2 == NULL || inode1 == inode2) {
- if (inode1)
- mutex_lock(&inode1->i_mutex);
- else if (inode2)
- mutex_lock(&inode2->i_mutex);
- return;
- }
-
- if (inode1 < inode2) {
- mutex_lock_nested(&inode1->i_mutex, I_MUTEX_PARENT);
- mutex_lock_nested(&inode2->i_mutex, I_MUTEX_CHILD);
- } else {
- mutex_lock_nested(&inode2->i_mutex, I_MUTEX_PARENT);
- mutex_lock_nested(&inode1->i_mutex, I_MUTEX_CHILD);
- }
-}
-EXPORT_SYMBOL(inode_double_lock);
-
-void inode_double_unlock(struct inode *inode1, struct inode *inode2)
-{
- if (inode1)
- mutex_unlock(&inode1->i_mutex);
-
- if (inode2 && inode2 != inode1)
- mutex_unlock(&inode2->i_mutex);
-}
-EXPORT_SYMBOL(inode_double_unlock);
-
static __initdata unsigned long ihash_entries;
static int __init set_ihash_entries(char *str)
{
diff --git a/fs/jbd/revoke.c b/fs/jbd/revoke.c
index c7bd649..3e9afc2 100644
--- a/fs/jbd/revoke.c
+++ b/fs/jbd/revoke.c
@@ -55,6 +55,25 @@
* need do nothing.
* RevokeValid set, Revoked set:
* buffer has been revoked.
+ *
+ * Locking rules:
+ * We keep two hash tables of revoke records. One hashtable belongs to the
+ * running transaction (is pointed to by journal->j_revoke), the other one
+ * belongs to the committing transaction. Accesses to the second hash table
+ * happen only from the kjournald and no other thread touches this table. Also
+ * journal_switch_revoke_table() which switches which hashtable belongs to the
+ * running and which to the committing transaction is called only from
+ * kjournald. Therefore we need no locks when accessing the hashtable belonging
+ * to the committing transaction.
+ *
+ * All users operating on the hash table belonging to the running transaction
+ * have a handle to the transaction. Therefore they are safe from kjournald
+ * switching hash tables under them. For operations on the lists of entries in
+ * the hash table j_revoke_lock is used.
+ *
+ * Finally, also replay code uses the hash tables but at this moment noone else
+ * can touch them (filesystem isn't mounted yet) and hence no locking is
+ * needed.
*/
#ifndef __KERNEL__
@@ -402,8 +421,6 @@
* the second time we would still have a pending revoke to cancel. So,
* do not trust the Revoked bit on buffers unless RevokeValid is also
* set.
- *
- * The caller must have the journal locked.
*/
int journal_cancel_revoke(handle_t *handle, struct journal_head *jh)
{
@@ -481,10 +498,7 @@
/*
* Write revoke records to the journal for all entries in the current
* revoke hash, deleting the entries as we go.
- *
- * Called with the journal lock held.
*/
-
void journal_write_revoke_records(journal_t *journal,
transaction_t *transaction)
{
diff --git a/fs/namei.c b/fs/namei.c
index b8433eb..78f253c 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1248,6 +1248,8 @@
int err;
struct qstr this;
+ WARN_ON_ONCE(!mutex_is_locked(&base->d_inode->i_mutex));
+
err = __lookup_one_len(name, &this, base, len);
if (err)
return ERR_PTR(err);
diff --git a/fs/namespace.c b/fs/namespace.c
index c6f54e4..4119620 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1377,7 +1377,7 @@
if (parent_path) {
detach_mnt(source_mnt, parent_path);
attach_mnt(source_mnt, path);
- touch_mnt_namespace(current->nsproxy->mnt_ns);
+ touch_mnt_namespace(parent_path->mnt->mnt_ns);
} else {
mnt_set_mountpoint(dest_mnt, dest_dentry, source_mnt);
commit_tree(source_mnt);
@@ -1920,8 +1920,9 @@
if (data_page)
((char *)data_page)[PAGE_SIZE - 1] = 0;
- /* Default to relatime */
- mnt_flags |= MNT_RELATIME;
+ /* Default to relatime unless overriden */
+ if (!(flags & MS_NOATIME))
+ mnt_flags |= MNT_RELATIME;
/* Separate the per-mountpoint flags */
if (flags & MS_NOSUID)
diff --git a/fs/ncpfs/ioctl.c b/fs/ncpfs/ioctl.c
index f54360f..fa038df 100644
--- a/fs/ncpfs/ioctl.c
+++ b/fs/ncpfs/ioctl.c
@@ -660,13 +660,10 @@
if (user.object_name_len > NCP_OBJECT_NAME_MAX_LEN)
return -ENOMEM;
if (user.object_name_len) {
- newname = kmalloc(user.object_name_len, GFP_USER);
- if (!newname)
- return -ENOMEM;
- if (copy_from_user(newname, user.object_name, user.object_name_len)) {
- kfree(newname);
- return -EFAULT;
- }
+ newname = memdup_user(user.object_name,
+ user.object_name_len);
+ if (IS_ERR(newname))
+ return PTR_ERR(newname);
} else {
newname = NULL;
}
@@ -760,13 +757,9 @@
if (user.len > NCP_PRIVATE_DATA_MAX_LEN)
return -ENOMEM;
if (user.len) {
- new = kmalloc(user.len, GFP_USER);
- if (!new)
- return -ENOMEM;
- if (copy_from_user(new, user.data, user.len)) {
- kfree(new);
- return -EFAULT;
- }
+ new = memdup_user(user.data, user.len);
+ if (IS_ERR(new))
+ return PTR_ERR(new);
} else {
new = NULL;
}
diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c
index e6a1932c..35869a4 100644
--- a/fs/nfs/nfs3xdr.c
+++ b/fs/nfs/nfs3xdr.c
@@ -713,7 +713,8 @@
if (args->npages != 0)
xdr_encode_pages(buf, args->pages, 0, args->len);
else
- req->rq_slen += args->len;
+ req->rq_slen = xdr_adjust_iovec(req->rq_svec,
+ p + XDR_QUADLEN(args->len));
err = nfsacl_encode(buf, base, args->inode,
(args->mask & NFS_ACL) ?
diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c
index 3444c00..5275097 100644
--- a/fs/nfsd/nfs4recover.c
+++ b/fs/nfsd/nfs4recover.c
@@ -229,21 +229,23 @@
goto out;
status = vfs_readdir(filp, nfsd4_build_namelist, &names);
fput(filp);
+ mutex_lock(&dir->d_inode->i_mutex);
while (!list_empty(&names)) {
entry = list_entry(names.next, struct name_list, list);
dentry = lookup_one_len(entry->name, dir, HEXDIR_LEN-1);
if (IS_ERR(dentry)) {
status = PTR_ERR(dentry);
- goto out;
+ break;
}
status = f(dir, dentry);
dput(dentry);
if (status)
- goto out;
+ break;
list_del(&entry->list);
kfree(entry);
}
+ mutex_unlock(&dir->d_inode->i_mutex);
out:
while (!list_empty(&names)) {
entry = list_entry(names.next, struct name_list, list);
@@ -255,36 +257,6 @@
}
static int
-nfsd4_remove_clid_file(struct dentry *dir, struct dentry *dentry)
-{
- int status;
-
- if (!S_ISREG(dir->d_inode->i_mode)) {
- printk("nfsd4: non-file found in client recovery directory\n");
- return -EINVAL;
- }
- mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
- status = vfs_unlink(dir->d_inode, dentry);
- mutex_unlock(&dir->d_inode->i_mutex);
- return status;
-}
-
-static int
-nfsd4_clear_clid_dir(struct dentry *dir, struct dentry *dentry)
-{
- int status;
-
- /* For now this directory should already be empty, but we empty it of
- * any regular files anyway, just in case the directory was created by
- * a kernel from the future.... */
- nfsd4_list_rec_dir(dentry, nfsd4_remove_clid_file);
- mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
- status = vfs_rmdir(dir->d_inode, dentry);
- mutex_unlock(&dir->d_inode->i_mutex);
- return status;
-}
-
-static int
nfsd4_unlink_clid_dir(char *name, int namlen)
{
struct dentry *dentry;
@@ -294,18 +266,18 @@
mutex_lock(&rec_dir.dentry->d_inode->i_mutex);
dentry = lookup_one_len(name, rec_dir.dentry, namlen);
- mutex_unlock(&rec_dir.dentry->d_inode->i_mutex);
if (IS_ERR(dentry)) {
status = PTR_ERR(dentry);
- return status;
+ goto out_unlock;
}
status = -ENOENT;
if (!dentry->d_inode)
goto out;
-
- status = nfsd4_clear_clid_dir(rec_dir.dentry, dentry);
+ status = vfs_rmdir(rec_dir.dentry->d_inode, dentry);
out:
dput(dentry);
+out_unlock:
+ mutex_unlock(&rec_dir.dentry->d_inode->i_mutex);
return status;
}
@@ -348,7 +320,7 @@
if (nfs4_has_reclaimed_state(child->d_name.name, false))
return 0;
- status = nfsd4_clear_clid_dir(parent, child);
+ status = vfs_rmdir(parent->d_inode, child);
if (status)
printk("failed to remove client recovery directory %s\n",
child->d_name.name);
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index ab93fcf..6c68ffd 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -116,10 +116,15 @@
}
if ((exp->ex_flags & NFSEXP_CROSSMOUNT) || EX_NOHIDE(exp2)) {
/* successfully crossed mount point */
- exp_put(exp);
- *expp = exp2;
+ /*
+ * This is subtle: dentry is *not* under mnt at this point.
+ * The only reason we are safe is that original mnt is pinned
+ * down by exp, so we should dput before putting exp.
+ */
dput(dentry);
*dpp = mounts;
+ exp_put(exp);
+ *expp = exp2;
} else {
exp_put(exp2);
dput(mounts);
@@ -1885,8 +1890,8 @@
return 0;
}
-static int nfsd_buffered_readdir(struct file *file, filldir_t func,
- struct readdir_cd *cdp, loff_t *offsetp)
+static __be32 nfsd_buffered_readdir(struct file *file, filldir_t func,
+ struct readdir_cd *cdp, loff_t *offsetp)
{
struct readdir_data buf;
struct buffered_dirent *de;
@@ -1896,11 +1901,12 @@
buf.dirent = (void *)__get_free_page(GFP_KERNEL);
if (!buf.dirent)
- return -ENOMEM;
+ return nfserrno(-ENOMEM);
offset = *offsetp;
while (1) {
+ struct inode *dir_inode = file->f_path.dentry->d_inode;
unsigned int reclen;
cdp->err = nfserr_eof; /* will be cleared on successful read */
@@ -1919,26 +1925,38 @@
if (!size)
break;
+ /*
+ * Various filldir functions may end up calling back into
+ * lookup_one_len() and the file system's ->lookup() method.
+ * These expect i_mutex to be held, as it would within readdir.
+ */
+ host_err = mutex_lock_killable(&dir_inode->i_mutex);
+ if (host_err)
+ break;
+
de = (struct buffered_dirent *)buf.dirent;
while (size > 0) {
offset = de->offset;
if (func(cdp, de->name, de->namlen, de->offset,
de->ino, de->d_type))
- goto done;
+ break;
if (cdp->err != nfs_ok)
- goto done;
+ break;
reclen = ALIGN(sizeof(*de) + de->namlen,
sizeof(u64));
size -= reclen;
de = (struct buffered_dirent *)((char *)de + reclen);
}
+ mutex_unlock(&dir_inode->i_mutex);
+ if (size > 0) /* We bailed out early */
+ break;
+
offset = vfs_llseek(file, 0, SEEK_CUR);
}
- done:
free_page((unsigned long)(buf.dirent));
if (host_err)
diff --git a/fs/nilfs2/bmap.c b/fs/nilfs2/bmap.c
index 24638e0..064279e 100644
--- a/fs/nilfs2/bmap.c
+++ b/fs/nilfs2/bmap.c
@@ -688,6 +688,8 @@
.bpop_translate = NULL,
};
+static struct lock_class_key nilfs_bmap_dat_lock_key;
+
/**
* nilfs_bmap_read - read a bmap from an inode
* @bmap: bmap
@@ -715,6 +717,7 @@
bmap->b_pops = &nilfs_bmap_ptr_ops_p;
bmap->b_last_allocated_key = 0; /* XXX: use macro */
bmap->b_last_allocated_ptr = NILFS_BMAP_NEW_PTR_INIT;
+ lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key);
break;
case NILFS_CPFILE_INO:
case NILFS_SUFILE_INO:
@@ -772,6 +775,7 @@
{
memcpy(gcbmap, bmap, sizeof(union nilfs_bmap_union));
init_rwsem(&gcbmap->b_sem);
+ lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key);
gcbmap->b_inode = &NILFS_BMAP_I(gcbmap)->vfs_inode;
}
@@ -779,5 +783,6 @@
{
memcpy(bmap, gcbmap, sizeof(union nilfs_bmap_union));
init_rwsem(&bmap->b_sem);
+ lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key);
bmap->b_inode = &NILFS_BMAP_I(bmap)->vfs_inode;
}
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index 7558c97..3d0c18a 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -35,11 +35,6 @@
#include "bmap_union.h"
/*
- * NILFS filesystem version
- */
-#define NILFS_VERSION "2.0.5"
-
-/*
* nilfs inode data in memory
*/
struct nilfs_inode_info {
diff --git a/fs/nilfs2/recovery.c b/fs/nilfs2/recovery.c
index 6ade096..4fc081e 100644
--- a/fs/nilfs2/recovery.c
+++ b/fs/nilfs2/recovery.c
@@ -413,7 +413,6 @@
struct nilfs_segment_entry *ent, *n;
struct inode *sufile = nilfs->ns_sufile;
__u64 segnum[4];
- time_t mtime;
int err;
int i;
@@ -442,24 +441,13 @@
* Collecting segments written after the latest super root.
* These are marked dirty to avoid being reallocated in the next write.
*/
- mtime = get_seconds();
list_for_each_entry_safe(ent, n, head, list) {
- if (ent->segnum == segnum[0]) {
- list_del(&ent->list);
- nilfs_free_segment_entry(ent);
- continue;
- }
- err = nilfs_open_segment_entry(ent, sufile);
- if (unlikely(err))
- goto failed;
- if (!nilfs_segment_usage_dirty(ent->raw_su)) {
- /* make the segment garbage */
- ent->raw_su->su_nblocks = cpu_to_le32(0);
- ent->raw_su->su_lastmod = cpu_to_le32(mtime);
- nilfs_segment_usage_set_dirty(ent->raw_su);
+ if (ent->segnum != segnum[0]) {
+ err = nilfs_sufile_scrap(sufile, ent->segnum);
+ if (unlikely(err))
+ goto failed;
}
list_del(&ent->list);
- nilfs_close_segment_entry(ent, sufile);
nilfs_free_segment_entry(ent);
}
diff --git a/fs/nilfs2/sufile.c b/fs/nilfs2/sufile.c
index c774cf3..98e6867 100644
--- a/fs/nilfs2/sufile.c
+++ b/fs/nilfs2/sufile.c
@@ -93,6 +93,52 @@
create, NULL, bhp);
}
+static void nilfs_sufile_mod_counter(struct buffer_head *header_bh,
+ u64 ncleanadd, u64 ndirtyadd)
+{
+ struct nilfs_sufile_header *header;
+ void *kaddr;
+
+ kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
+ header = kaddr + bh_offset(header_bh);
+ le64_add_cpu(&header->sh_ncleansegs, ncleanadd);
+ le64_add_cpu(&header->sh_ndirtysegs, ndirtyadd);
+ kunmap_atomic(kaddr, KM_USER0);
+
+ nilfs_mdt_mark_buffer_dirty(header_bh);
+}
+
+int nilfs_sufile_update(struct inode *sufile, __u64 segnum, int create,
+ void (*dofunc)(struct inode *, __u64,
+ struct buffer_head *,
+ struct buffer_head *))
+{
+ struct buffer_head *header_bh, *bh;
+ int ret;
+
+ if (unlikely(segnum >= nilfs_sufile_get_nsegments(sufile))) {
+ printk(KERN_WARNING "%s: invalid segment number: %llu\n",
+ __func__, (unsigned long long)segnum);
+ return -EINVAL;
+ }
+ down_write(&NILFS_MDT(sufile)->mi_sem);
+
+ ret = nilfs_sufile_get_header_block(sufile, &header_bh);
+ if (ret < 0)
+ goto out_sem;
+
+ ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, create, &bh);
+ if (!ret) {
+ dofunc(sufile, segnum, header_bh, bh);
+ brelse(bh);
+ }
+ brelse(header_bh);
+
+ out_sem:
+ up_write(&NILFS_MDT(sufile)->mi_sem);
+ return ret;
+}
+
/**
* nilfs_sufile_alloc - allocate a segment
* @sufile: inode of segment usage file
@@ -113,7 +159,6 @@
int nilfs_sufile_alloc(struct inode *sufile, __u64 *segnump)
{
struct buffer_head *header_bh, *su_bh;
- struct the_nilfs *nilfs;
struct nilfs_sufile_header *header;
struct nilfs_segment_usage *su;
size_t susz = NILFS_MDT(sufile)->mi_entry_size;
@@ -124,8 +169,6 @@
down_write(&NILFS_MDT(sufile)->mi_sem);
- nilfs = NILFS_MDT(sufile)->mi_nilfs;
-
ret = nilfs_sufile_get_header_block(sufile, &header_bh);
if (ret < 0)
goto out_sem;
@@ -192,165 +235,84 @@
return ret;
}
-/**
- * nilfs_sufile_cancel_free -
- * @sufile: inode of segment usage file
- * @segnum: segment number
- *
- * Description:
- *
- * Return Value: On success, 0 is returned. On error, one of the following
- * negative error codes is returned.
- *
- * %-EIO - I/O error.
- *
- * %-ENOMEM - Insufficient amount of memory available.
- */
-int nilfs_sufile_cancel_free(struct inode *sufile, __u64 segnum)
+void nilfs_sufile_do_cancel_free(struct inode *sufile, __u64 segnum,
+ struct buffer_head *header_bh,
+ struct buffer_head *su_bh)
{
- struct buffer_head *header_bh, *su_bh;
- struct the_nilfs *nilfs;
- struct nilfs_sufile_header *header;
struct nilfs_segment_usage *su;
void *kaddr;
- int ret;
-
- down_write(&NILFS_MDT(sufile)->mi_sem);
-
- nilfs = NILFS_MDT(sufile)->mi_nilfs;
-
- ret = nilfs_sufile_get_header_block(sufile, &header_bh);
- if (ret < 0)
- goto out_sem;
-
- ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &su_bh);
- if (ret < 0)
- goto out_header;
kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
- su = nilfs_sufile_block_get_segment_usage(
- sufile, segnum, su_bh, kaddr);
+ su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
if (unlikely(!nilfs_segment_usage_clean(su))) {
printk(KERN_WARNING "%s: segment %llu must be clean\n",
__func__, (unsigned long long)segnum);
kunmap_atomic(kaddr, KM_USER0);
- goto out_su_bh;
+ return;
}
nilfs_segment_usage_set_dirty(su);
kunmap_atomic(kaddr, KM_USER0);
- kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
- header = nilfs_sufile_block_get_header(sufile, header_bh, kaddr);
- le64_add_cpu(&header->sh_ncleansegs, -1);
- le64_add_cpu(&header->sh_ndirtysegs, 1);
- kunmap_atomic(kaddr, KM_USER0);
-
- nilfs_mdt_mark_buffer_dirty(header_bh);
+ nilfs_sufile_mod_counter(header_bh, -1, 1);
nilfs_mdt_mark_buffer_dirty(su_bh);
nilfs_mdt_mark_dirty(sufile);
-
- out_su_bh:
- brelse(su_bh);
- out_header:
- brelse(header_bh);
- out_sem:
- up_write(&NILFS_MDT(sufile)->mi_sem);
- return ret;
}
-/**
- * nilfs_sufile_freev - free segments
- * @sufile: inode of segment usage file
- * @segnum: array of segment numbers
- * @nsegs: number of segments
- *
- * Description: nilfs_sufile_freev() frees segments specified by @segnum and
- * @nsegs, which must have been returned by a previous call to
- * nilfs_sufile_alloc().
- *
- * Return Value: On success, 0 is returned. On error, one of the following
- * negative error codes is returned.
- *
- * %-EIO - I/O error.
- *
- * %-ENOMEM - Insufficient amount of memory available.
- */
-#define NILFS_SUFILE_FREEV_PREALLOC 16
-int nilfs_sufile_freev(struct inode *sufile, __u64 *segnum, size_t nsegs)
+void nilfs_sufile_do_scrap(struct inode *sufile, __u64 segnum,
+ struct buffer_head *header_bh,
+ struct buffer_head *su_bh)
{
- struct buffer_head *header_bh, **su_bh,
- *su_bh_prealloc[NILFS_SUFILE_FREEV_PREALLOC];
- struct the_nilfs *nilfs;
- struct nilfs_sufile_header *header;
struct nilfs_segment_usage *su;
void *kaddr;
- int ret, i;
+ int clean, dirty;
- down_write(&NILFS_MDT(sufile)->mi_sem);
-
- nilfs = NILFS_MDT(sufile)->mi_nilfs;
-
- /* prepare resources */
- if (nsegs <= NILFS_SUFILE_FREEV_PREALLOC)
- su_bh = su_bh_prealloc;
- else {
- su_bh = kmalloc(sizeof(*su_bh) * nsegs, GFP_NOFS);
- if (su_bh == NULL) {
- ret = -ENOMEM;
- goto out_sem;
- }
- }
-
- ret = nilfs_sufile_get_header_block(sufile, &header_bh);
- if (ret < 0)
- goto out_su_bh;
- for (i = 0; i < nsegs; i++) {
- ret = nilfs_sufile_get_segment_usage_block(sufile, segnum[i],
- 0, &su_bh[i]);
- if (ret < 0)
- goto out_bh;
- }
-
- /* free segments */
- for (i = 0; i < nsegs; i++) {
- kaddr = kmap_atomic(su_bh[i]->b_page, KM_USER0);
- su = nilfs_sufile_block_get_segment_usage(
- sufile, segnum[i], su_bh[i], kaddr);
- WARN_ON(nilfs_segment_usage_error(su));
- nilfs_segment_usage_set_clean(su);
+ kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
+ su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
+ if (su->su_flags == cpu_to_le32(1UL << NILFS_SEGMENT_USAGE_DIRTY) &&
+ su->su_nblocks == cpu_to_le32(0)) {
kunmap_atomic(kaddr, KM_USER0);
- nilfs_mdt_mark_buffer_dirty(su_bh[i]);
+ return;
}
- kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
- header = nilfs_sufile_block_get_header(sufile, header_bh, kaddr);
- le64_add_cpu(&header->sh_ncleansegs, nsegs);
- le64_add_cpu(&header->sh_ndirtysegs, -(u64)nsegs);
+ clean = nilfs_segment_usage_clean(su);
+ dirty = nilfs_segment_usage_dirty(su);
+
+ /* make the segment garbage */
+ su->su_lastmod = cpu_to_le64(0);
+ su->su_nblocks = cpu_to_le32(0);
+ su->su_flags = cpu_to_le32(1UL << NILFS_SEGMENT_USAGE_DIRTY);
kunmap_atomic(kaddr, KM_USER0);
- nilfs_mdt_mark_buffer_dirty(header_bh);
+
+ nilfs_sufile_mod_counter(header_bh, clean ? (u64)-1 : 0, dirty ? 0 : 1);
+ nilfs_mdt_mark_buffer_dirty(su_bh);
nilfs_mdt_mark_dirty(sufile);
-
- out_bh:
- for (i--; i >= 0; i--)
- brelse(su_bh[i]);
- brelse(header_bh);
-
- out_su_bh:
- if (su_bh != su_bh_prealloc)
- kfree(su_bh);
-
- out_sem:
- up_write(&NILFS_MDT(sufile)->mi_sem);
- return ret;
}
-/**
- * nilfs_sufile_free -
- * @sufile:
- * @segnum:
- */
-int nilfs_sufile_free(struct inode *sufile, __u64 segnum)
+void nilfs_sufile_do_free(struct inode *sufile, __u64 segnum,
+ struct buffer_head *header_bh,
+ struct buffer_head *su_bh)
{
- return nilfs_sufile_freev(sufile, &segnum, 1);
+ struct nilfs_segment_usage *su;
+ void *kaddr;
+ int sudirty;
+
+ kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
+ su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
+ if (nilfs_segment_usage_clean(su)) {
+ printk(KERN_WARNING "%s: segment %llu is already clean\n",
+ __func__, (unsigned long long)segnum);
+ kunmap_atomic(kaddr, KM_USER0);
+ return;
+ }
+ WARN_ON(nilfs_segment_usage_error(su));
+ WARN_ON(!nilfs_segment_usage_dirty(su));
+
+ sudirty = nilfs_segment_usage_dirty(su);
+ nilfs_segment_usage_set_clean(su);
+ kunmap_atomic(kaddr, KM_USER0);
+ nilfs_mdt_mark_buffer_dirty(su_bh);
+
+ nilfs_sufile_mod_counter(header_bh, 1, sudirty ? (u64)-1 : 0);
+ nilfs_mdt_mark_dirty(sufile);
}
/**
@@ -500,72 +462,28 @@
return ret;
}
-/**
- * nilfs_sufile_set_error - mark a segment as erroneous
- * @sufile: inode of segment usage file
- * @segnum: segment number
- *
- * Description: nilfs_sufile_set_error() marks the segment specified by
- * @segnum as erroneous. The error segment will never be used again.
- *
- * Return Value: On success, 0 is returned. On error, one of the following
- * negative error codes is returned.
- *
- * %-EIO - I/O error.
- *
- * %-ENOMEM - Insufficient amount of memory available.
- *
- * %-EINVAL - Invalid segment usage number.
- */
-int nilfs_sufile_set_error(struct inode *sufile, __u64 segnum)
+void nilfs_sufile_do_set_error(struct inode *sufile, __u64 segnum,
+ struct buffer_head *header_bh,
+ struct buffer_head *su_bh)
{
- struct buffer_head *header_bh, *su_bh;
struct nilfs_segment_usage *su;
- struct nilfs_sufile_header *header;
void *kaddr;
- int ret;
-
- if (unlikely(segnum >= nilfs_sufile_get_nsegments(sufile))) {
- printk(KERN_WARNING "%s: invalid segment number: %llu\n",
- __func__, (unsigned long long)segnum);
- return -EINVAL;
- }
- down_write(&NILFS_MDT(sufile)->mi_sem);
-
- ret = nilfs_sufile_get_header_block(sufile, &header_bh);
- if (ret < 0)
- goto out_sem;
- ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &su_bh);
- if (ret < 0)
- goto out_header;
+ int suclean;
kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
if (nilfs_segment_usage_error(su)) {
kunmap_atomic(kaddr, KM_USER0);
- brelse(su_bh);
- goto out_header;
+ return;
}
-
+ suclean = nilfs_segment_usage_clean(su);
nilfs_segment_usage_set_error(su);
kunmap_atomic(kaddr, KM_USER0);
- brelse(su_bh);
- kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
- header = nilfs_sufile_block_get_header(sufile, header_bh, kaddr);
- le64_add_cpu(&header->sh_ndirtysegs, -1);
- kunmap_atomic(kaddr, KM_USER0);
- nilfs_mdt_mark_buffer_dirty(header_bh);
+ if (suclean)
+ nilfs_sufile_mod_counter(header_bh, -1, 0);
nilfs_mdt_mark_buffer_dirty(su_bh);
nilfs_mdt_mark_dirty(sufile);
- brelse(su_bh);
-
- out_header:
- brelse(header_bh);
-
- out_sem:
- up_write(&NILFS_MDT(sufile)->mi_sem);
- return ret;
}
/**
@@ -625,7 +543,7 @@
si[i + j].sui_nblocks = le32_to_cpu(su->su_nblocks);
si[i + j].sui_flags = le32_to_cpu(su->su_flags) &
~(1UL << NILFS_SEGMENT_USAGE_ACTIVE);
- if (nilfs_segment_is_active(nilfs, segnum + i + j))
+ if (nilfs_segment_is_active(nilfs, segnum + j))
si[i + j].sui_flags |=
(1UL << NILFS_SEGMENT_USAGE_ACTIVE);
}
diff --git a/fs/nilfs2/sufile.h b/fs/nilfs2/sufile.h
index d595f33..a2e2efd 100644
--- a/fs/nilfs2/sufile.h
+++ b/fs/nilfs2/sufile.h
@@ -36,9 +36,6 @@
}
int nilfs_sufile_alloc(struct inode *, __u64 *);
-int nilfs_sufile_cancel_free(struct inode *, __u64);
-int nilfs_sufile_freev(struct inode *, __u64 *, size_t);
-int nilfs_sufile_free(struct inode *, __u64);
int nilfs_sufile_get_segment_usage(struct inode *, __u64,
struct nilfs_segment_usage **,
struct buffer_head **);
@@ -46,9 +43,83 @@
struct buffer_head *);
int nilfs_sufile_get_stat(struct inode *, struct nilfs_sustat *);
int nilfs_sufile_get_ncleansegs(struct inode *, unsigned long *);
-int nilfs_sufile_set_error(struct inode *, __u64);
ssize_t nilfs_sufile_get_suinfo(struct inode *, __u64, struct nilfs_suinfo *,
size_t);
+int nilfs_sufile_update(struct inode *, __u64, int,
+ void (*dofunc)(struct inode *, __u64,
+ struct buffer_head *,
+ struct buffer_head *));
+void nilfs_sufile_do_cancel_free(struct inode *, __u64, struct buffer_head *,
+ struct buffer_head *);
+void nilfs_sufile_do_scrap(struct inode *, __u64, struct buffer_head *,
+ struct buffer_head *);
+void nilfs_sufile_do_free(struct inode *, __u64, struct buffer_head *,
+ struct buffer_head *);
+void nilfs_sufile_do_set_error(struct inode *, __u64, struct buffer_head *,
+ struct buffer_head *);
+
+/**
+ * nilfs_sufile_cancel_free -
+ * @sufile: inode of segment usage file
+ * @segnum: segment number
+ *
+ * Description:
+ *
+ * Return Value: On success, 0 is returned. On error, one of the following
+ * negative error codes is returned.
+ *
+ * %-EIO - I/O error.
+ *
+ * %-ENOMEM - Insufficient amount of memory available.
+ */
+static inline int nilfs_sufile_cancel_free(struct inode *sufile, __u64 segnum)
+{
+ return nilfs_sufile_update(sufile, segnum, 0,
+ nilfs_sufile_do_cancel_free);
+}
+
+/**
+ * nilfs_sufile_scrap - make a segment garbage
+ * @sufile: inode of segment usage file
+ * @segnum: segment number to be freed
+ */
+static inline int nilfs_sufile_scrap(struct inode *sufile, __u64 segnum)
+{
+ return nilfs_sufile_update(sufile, segnum, 1, nilfs_sufile_do_scrap);
+}
+
+/**
+ * nilfs_sufile_free - free segment
+ * @sufile: inode of segment usage file
+ * @segnum: segment number to be freed
+ */
+static inline int nilfs_sufile_free(struct inode *sufile, __u64 segnum)
+{
+ return nilfs_sufile_update(sufile, segnum, 0, nilfs_sufile_do_free);
+}
+
+/**
+ * nilfs_sufile_set_error - mark a segment as erroneous
+ * @sufile: inode of segment usage file
+ * @segnum: segment number
+ *
+ * Description: nilfs_sufile_set_error() marks the segment specified by
+ * @segnum as erroneous. The error segment will never be used again.
+ *
+ * Return Value: On success, 0 is returned. On error, one of the following
+ * negative error codes is returned.
+ *
+ * %-EIO - I/O error.
+ *
+ * %-ENOMEM - Insufficient amount of memory available.
+ *
+ * %-EINVAL - Invalid segment usage number.
+ */
+static inline int nilfs_sufile_set_error(struct inode *sufile, __u64 segnum)
+{
+ return nilfs_sufile_update(sufile, segnum, 0,
+ nilfs_sufile_do_set_error);
+}
#endif /* _NILFS_SUFILE_H */
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index e117e1e..6989b03 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -63,7 +63,6 @@
MODULE_AUTHOR("NTT Corp.");
MODULE_DESCRIPTION("A New Implementation of the Log-structured Filesystem "
"(NILFS)");
-MODULE_VERSION(NILFS_VERSION);
MODULE_LICENSE("GPL");
static int nilfs_remount(struct super_block *sb, int *flags, char *data);
@@ -476,11 +475,12 @@
{
struct super_block *sb = dentry->d_sb;
struct nilfs_sb_info *sbi = NILFS_SB(sb);
+ struct the_nilfs *nilfs = sbi->s_nilfs;
+ u64 id = huge_encode_dev(sb->s_bdev->bd_dev);
unsigned long long blocks;
unsigned long overhead;
unsigned long nrsvblocks;
sector_t nfreeblocks;
- struct the_nilfs *nilfs = sbi->s_nilfs;
int err;
/*
@@ -514,6 +514,9 @@
buf->f_files = atomic_read(&sbi->s_inodes_count);
buf->f_ffree = 0; /* nilfs_count_free_inodes(sb); */
buf->f_namelen = NILFS_NAME_LEN;
+ buf->f_fsid.val[0] = (u32)id;
+ buf->f_fsid.val[1] = (u32)(id >> 32);
+
return 0;
}
diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c
index 33400cf..7f65b3b 100644
--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -115,6 +115,7 @@
static int nilfs_load_super_root(struct the_nilfs *nilfs,
struct nilfs_sb_info *sbi, sector_t sr_block)
{
+ static struct lock_class_key dat_lock_key;
struct buffer_head *bh_sr;
struct nilfs_super_root *raw_sr;
struct nilfs_super_block **sbp = nilfs->ns_sbp;
@@ -163,6 +164,9 @@
if (unlikely(err))
goto failed_sufile;
+ lockdep_set_class(&NILFS_MDT(nilfs->ns_dat)->mi_sem, &dat_lock_key);
+ lockdep_set_class(&NILFS_MDT(nilfs->ns_gc_dat)->mi_sem, &dat_lock_key);
+
nilfs_mdt_set_shadow(nilfs->ns_dat, nilfs->ns_gc_dat);
nilfs_mdt_set_entry_size(nilfs->ns_cpfile, checkpoint_size,
sizeof(struct nilfs_cpfile_header));
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 8672b95..c2a87c8 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1912,6 +1912,22 @@
return written ? written : ret;
}
+static int ocfs2_splice_to_file(struct pipe_inode_info *pipe,
+ struct file *out,
+ struct splice_desc *sd)
+{
+ int ret;
+
+ ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, &sd->pos,
+ sd->total_len, 0, NULL);
+ if (ret < 0) {
+ mlog_errno(ret);
+ return ret;
+ }
+
+ return splice_from_pipe_feed(pipe, sd, pipe_to_file);
+}
+
static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe,
struct file *out,
loff_t *ppos,
@@ -1919,38 +1935,76 @@
unsigned int flags)
{
int ret;
- struct inode *inode = out->f_path.dentry->d_inode;
+ struct address_space *mapping = out->f_mapping;
+ struct inode *inode = mapping->host;
+ struct splice_desc sd = {
+ .total_len = len,
+ .flags = flags,
+ .pos = *ppos,
+ .u.file = out,
+ };
mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe,
(unsigned int)len,
out->f_path.dentry->d_name.len,
out->f_path.dentry->d_name.name);
- mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT);
-
- ret = ocfs2_rw_lock(inode, 1);
- if (ret < 0) {
- mlog_errno(ret);
- goto out;
- }
-
- ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, ppos, len, 0,
- NULL);
- if (ret < 0) {
- mlog_errno(ret);
- goto out_unlock;
- }
-
if (pipe->inode)
- mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD);
- ret = generic_file_splice_write_nolock(pipe, out, ppos, len, flags);
+ mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT);
+
+ splice_from_pipe_begin(&sd);
+ do {
+ ret = splice_from_pipe_next(pipe, &sd);
+ if (ret <= 0)
+ break;
+
+ mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
+ ret = ocfs2_rw_lock(inode, 1);
+ if (ret < 0)
+ mlog_errno(ret);
+ else {
+ ret = ocfs2_splice_to_file(pipe, out, &sd);
+ ocfs2_rw_unlock(inode, 1);
+ }
+ mutex_unlock(&inode->i_mutex);
+ } while (ret > 0);
+ splice_from_pipe_end(pipe, &sd);
+
if (pipe->inode)
mutex_unlock(&pipe->inode->i_mutex);
-out_unlock:
- ocfs2_rw_unlock(inode, 1);
-out:
- mutex_unlock(&inode->i_mutex);
+ if (sd.num_spliced)
+ ret = sd.num_spliced;
+
+ if (ret > 0) {
+ unsigned long nr_pages;
+
+ *ppos += ret;
+ nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
+
+ /*
+ * If file or inode is SYNC and we actually wrote some data,
+ * sync it.
+ */
+ if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
+ int err;
+
+ mutex_lock(&inode->i_mutex);
+ err = ocfs2_rw_lock(inode, 1);
+ if (err < 0) {
+ mlog_errno(err);
+ } else {
+ err = generic_osync_inode(inode, mapping,
+ OSYNC_METADATA|OSYNC_DATA);
+ ocfs2_rw_unlock(inode, 1);
+ }
+ mutex_unlock(&inode->i_mutex);
+
+ if (err)
+ ret = err;
+ }
+ balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
+ }
mlog_exit(ret);
return ret;
diff --git a/fs/pipe.c b/fs/pipe.c
index 4af7aa5..13414ec 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -37,6 +37,42 @@
* -- Manfred Spraul <manfred@colorfullife.com> 2002-05-09
*/
+static void pipe_lock_nested(struct pipe_inode_info *pipe, int subclass)
+{
+ if (pipe->inode)
+ mutex_lock_nested(&pipe->inode->i_mutex, subclass);
+}
+
+void pipe_lock(struct pipe_inode_info *pipe)
+{
+ /*
+ * pipe_lock() nests non-pipe inode locks (for writing to a file)
+ */
+ pipe_lock_nested(pipe, I_MUTEX_PARENT);
+}
+EXPORT_SYMBOL(pipe_lock);
+
+void pipe_unlock(struct pipe_inode_info *pipe)
+{
+ if (pipe->inode)
+ mutex_unlock(&pipe->inode->i_mutex);
+}
+EXPORT_SYMBOL(pipe_unlock);
+
+void pipe_double_lock(struct pipe_inode_info *pipe1,
+ struct pipe_inode_info *pipe2)
+{
+ BUG_ON(pipe1 == pipe2);
+
+ if (pipe1 < pipe2) {
+ pipe_lock_nested(pipe1, I_MUTEX_PARENT);
+ pipe_lock_nested(pipe2, I_MUTEX_CHILD);
+ } else {
+ pipe_lock_nested(pipe2, I_MUTEX_CHILD);
+ pipe_lock_nested(pipe1, I_MUTEX_PARENT);
+ }
+}
+
/* Drop the inode semaphore and wait for a pipe event, atomically */
void pipe_wait(struct pipe_inode_info *pipe)
{
@@ -47,12 +83,10 @@
* is considered a noninteractive wait:
*/
prepare_to_wait(&pipe->wait, &wait, TASK_INTERRUPTIBLE);
- if (pipe->inode)
- mutex_unlock(&pipe->inode->i_mutex);
+ pipe_unlock(pipe);
schedule();
finish_wait(&pipe->wait, &wait);
- if (pipe->inode)
- mutex_lock(&pipe->inode->i_mutex);
+ pipe_lock(pipe);
}
static int
diff --git a/fs/proc/base.c b/fs/proc/base.c
index f715597..aa763ab 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -648,14 +648,14 @@
{
struct proc_mounts *p = file->private_data;
struct mnt_namespace *ns = p->ns;
- unsigned res = 0;
+ unsigned res = POLLIN | POLLRDNORM;
poll_wait(file, &ns->poll, wait);
spin_lock(&vfsmount_lock);
if (p->event != ns->event) {
p->event = ns->event;
- res = POLLERR;
+ res |= POLLERR | POLLPRI;
}
spin_unlock(&vfsmount_lock);
diff --git a/fs/splice.c b/fs/splice.c
index c18aa7e..666953d5 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -182,8 +182,7 @@
do_wakeup = 0;
page_nr = 0;
- if (pipe->inode)
- mutex_lock(&pipe->inode->i_mutex);
+ pipe_lock(pipe);
for (;;) {
if (!pipe->readers) {
@@ -245,15 +244,13 @@
pipe->waiting_writers--;
}
- if (pipe->inode) {
- mutex_unlock(&pipe->inode->i_mutex);
+ pipe_unlock(pipe);
- if (do_wakeup) {
- smp_mb();
- if (waitqueue_active(&pipe->wait))
- wake_up_interruptible(&pipe->wait);
- kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
- }
+ if (do_wakeup) {
+ smp_mb();
+ if (waitqueue_active(&pipe->wait))
+ wake_up_interruptible(&pipe->wait);
+ kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
}
while (page_nr < spd_pages)
@@ -555,8 +552,8 @@
* SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create
* a new page in the output file page cache and fill/dirty that.
*/
-static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
- struct splice_desc *sd)
+int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
+ struct splice_desc *sd)
{
struct file *file = sd->u.file;
struct address_space *mapping = file->f_mapping;
@@ -600,6 +597,149 @@
out:
return ret;
}
+EXPORT_SYMBOL(pipe_to_file);
+
+static void wakeup_pipe_writers(struct pipe_inode_info *pipe)
+{
+ smp_mb();
+ if (waitqueue_active(&pipe->wait))
+ wake_up_interruptible(&pipe->wait);
+ kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
+}
+
+/**
+ * splice_from_pipe_feed - feed available data from a pipe to a file
+ * @pipe: pipe to splice from
+ * @sd: information to @actor
+ * @actor: handler that splices the data
+ *
+ * Description:
+ * This function loops over the pipe and calls @actor to do the
+ * actual moving of a single struct pipe_buffer to the desired
+ * destination. It returns when there's no more buffers left in
+ * the pipe or if the requested number of bytes (@sd->total_len)
+ * have been copied. It returns a positive number (one) if the
+ * pipe needs to be filled with more data, zero if the required
+ * number of bytes have been copied and -errno on error.
+ *
+ * This, together with splice_from_pipe_{begin,end,next}, may be
+ * used to implement the functionality of __splice_from_pipe() when
+ * locking is required around copying the pipe buffers to the
+ * destination.
+ */
+int splice_from_pipe_feed(struct pipe_inode_info *pipe, struct splice_desc *sd,
+ splice_actor *actor)
+{
+ int ret;
+
+ while (pipe->nrbufs) {
+ struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
+ const struct pipe_buf_operations *ops = buf->ops;
+
+ sd->len = buf->len;
+ if (sd->len > sd->total_len)
+ sd->len = sd->total_len;
+
+ ret = actor(pipe, buf, sd);
+ if (ret <= 0) {
+ if (ret == -ENODATA)
+ ret = 0;
+ return ret;
+ }
+ buf->offset += ret;
+ buf->len -= ret;
+
+ sd->num_spliced += ret;
+ sd->len -= ret;
+ sd->pos += ret;
+ sd->total_len -= ret;
+
+ if (!buf->len) {
+ buf->ops = NULL;
+ ops->release(pipe, buf);
+ pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1);
+ pipe->nrbufs--;
+ if (pipe->inode)
+ sd->need_wakeup = true;
+ }
+
+ if (!sd->total_len)
+ return 0;
+ }
+
+ return 1;
+}
+EXPORT_SYMBOL(splice_from_pipe_feed);
+
+/**
+ * splice_from_pipe_next - wait for some data to splice from
+ * @pipe: pipe to splice from
+ * @sd: information about the splice operation
+ *
+ * Description:
+ * This function will wait for some data and return a positive
+ * value (one) if pipe buffers are available. It will return zero
+ * or -errno if no more data needs to be spliced.
+ */
+int splice_from_pipe_next(struct pipe_inode_info *pipe, struct splice_desc *sd)
+{
+ while (!pipe->nrbufs) {
+ if (!pipe->writers)
+ return 0;
+
+ if (!pipe->waiting_writers && sd->num_spliced)
+ return 0;
+
+ if (sd->flags & SPLICE_F_NONBLOCK)
+ return -EAGAIN;
+
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+
+ if (sd->need_wakeup) {
+ wakeup_pipe_writers(pipe);
+ sd->need_wakeup = false;
+ }
+
+ pipe_wait(pipe);
+ }
+
+ return 1;
+}
+EXPORT_SYMBOL(splice_from_pipe_next);
+
+/**
+ * splice_from_pipe_begin - start splicing from pipe
+ * @sd: information about the splice operation
+ *
+ * Description:
+ * This function should be called before a loop containing
+ * splice_from_pipe_next() and splice_from_pipe_feed() to
+ * initialize the necessary fields of @sd.
+ */
+void splice_from_pipe_begin(struct splice_desc *sd)
+{
+ sd->num_spliced = 0;
+ sd->need_wakeup = false;
+}
+EXPORT_SYMBOL(splice_from_pipe_begin);
+
+/**
+ * splice_from_pipe_end - finish splicing from pipe
+ * @pipe: pipe to splice from
+ * @sd: information about the splice operation
+ *
+ * Description:
+ * This function will wake up pipe writers if necessary. It should
+ * be called after a loop containing splice_from_pipe_next() and
+ * splice_from_pipe_feed().
+ */
+void splice_from_pipe_end(struct pipe_inode_info *pipe, struct splice_desc *sd)
+{
+ if (sd->need_wakeup)
+ wakeup_pipe_writers(pipe);
+}
+EXPORT_SYMBOL(splice_from_pipe_end);
/**
* __splice_from_pipe - splice data from a pipe to given actor
@@ -617,91 +757,17 @@
ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd,
splice_actor *actor)
{
- int ret, do_wakeup, err;
+ int ret;
- ret = 0;
- do_wakeup = 0;
+ splice_from_pipe_begin(sd);
+ do {
+ ret = splice_from_pipe_next(pipe, sd);
+ if (ret > 0)
+ ret = splice_from_pipe_feed(pipe, sd, actor);
+ } while (ret > 0);
+ splice_from_pipe_end(pipe, sd);
- for (;;) {
- if (pipe->nrbufs) {
- struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
- const struct pipe_buf_operations *ops = buf->ops;
-
- sd->len = buf->len;
- if (sd->len > sd->total_len)
- sd->len = sd->total_len;
-
- err = actor(pipe, buf, sd);
- if (err <= 0) {
- if (!ret && err != -ENODATA)
- ret = err;
-
- break;
- }
-
- ret += err;
- buf->offset += err;
- buf->len -= err;
-
- sd->len -= err;
- sd->pos += err;
- sd->total_len -= err;
- if (sd->len)
- continue;
-
- if (!buf->len) {
- buf->ops = NULL;
- ops->release(pipe, buf);
- pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1);
- pipe->nrbufs--;
- if (pipe->inode)
- do_wakeup = 1;
- }
-
- if (!sd->total_len)
- break;
- }
-
- if (pipe->nrbufs)
- continue;
- if (!pipe->writers)
- break;
- if (!pipe->waiting_writers) {
- if (ret)
- break;
- }
-
- if (sd->flags & SPLICE_F_NONBLOCK) {
- if (!ret)
- ret = -EAGAIN;
- break;
- }
-
- if (signal_pending(current)) {
- if (!ret)
- ret = -ERESTARTSYS;
- break;
- }
-
- if (do_wakeup) {
- smp_mb();
- if (waitqueue_active(&pipe->wait))
- wake_up_interruptible_sync(&pipe->wait);
- kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
- do_wakeup = 0;
- }
-
- pipe_wait(pipe);
- }
-
- if (do_wakeup) {
- smp_mb();
- if (waitqueue_active(&pipe->wait))
- wake_up_interruptible(&pipe->wait);
- kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
- }
-
- return ret;
+ return sd->num_spliced ? sd->num_spliced : ret;
}
EXPORT_SYMBOL(__splice_from_pipe);
@@ -715,7 +781,7 @@
* @actor: handler that splices the data
*
* Description:
- * See __splice_from_pipe. This function locks the input and output inodes,
+ * See __splice_from_pipe. This function locks the pipe inode,
* otherwise it's identical to __splice_from_pipe().
*
*/
@@ -724,7 +790,6 @@
splice_actor *actor)
{
ssize_t ret;
- struct inode *inode = out->f_mapping->host;
struct splice_desc sd = {
.total_len = len,
.flags = flags,
@@ -732,88 +797,14 @@
.u.file = out,
};
- /*
- * The actor worker might be calling ->write_begin and
- * ->write_end. Most of the time, these expect i_mutex to
- * be held. Since this may result in an ABBA deadlock with
- * pipe->inode, we have to order lock acquiry here.
- *
- * Outer lock must be inode->i_mutex, as pipe_wait() will
- * release and reacquire pipe->inode->i_mutex, AND inode must
- * never be a pipe.
- */
- WARN_ON(S_ISFIFO(inode->i_mode));
- mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT);
- if (pipe->inode)
- mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD);
+ pipe_lock(pipe);
ret = __splice_from_pipe(pipe, &sd, actor);
- if (pipe->inode)
- mutex_unlock(&pipe->inode->i_mutex);
- mutex_unlock(&inode->i_mutex);
+ pipe_unlock(pipe);
return ret;
}
/**
- * generic_file_splice_write_nolock - generic_file_splice_write without mutexes
- * @pipe: pipe info
- * @out: file to write to
- * @ppos: position in @out
- * @len: number of bytes to splice
- * @flags: splice modifier flags
- *
- * Description:
- * Will either move or copy pages (determined by @flags options) from
- * the given pipe inode to the given file. The caller is responsible
- * for acquiring i_mutex on both inodes.
- *
- */
-ssize_t
-generic_file_splice_write_nolock(struct pipe_inode_info *pipe, struct file *out,
- loff_t *ppos, size_t len, unsigned int flags)
-{
- struct address_space *mapping = out->f_mapping;
- struct inode *inode = mapping->host;
- struct splice_desc sd = {
- .total_len = len,
- .flags = flags,
- .pos = *ppos,
- .u.file = out,
- };
- ssize_t ret;
- int err;
-
- err = file_remove_suid(out);
- if (unlikely(err))
- return err;
-
- ret = __splice_from_pipe(pipe, &sd, pipe_to_file);
- if (ret > 0) {
- unsigned long nr_pages;
-
- *ppos += ret;
- nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
-
- /*
- * If file or inode is SYNC and we actually wrote some data,
- * sync it.
- */
- if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
- err = generic_osync_inode(inode, mapping,
- OSYNC_METADATA|OSYNC_DATA);
-
- if (err)
- ret = err;
- }
- balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
- }
-
- return ret;
-}
-
-EXPORT_SYMBOL(generic_file_splice_write_nolock);
-
-/**
* generic_file_splice_write - splice data from a pipe to a file
* @pipe: pipe info
* @out: file to write to
@@ -840,17 +831,27 @@
};
ssize_t ret;
- WARN_ON(S_ISFIFO(inode->i_mode));
- mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT);
- ret = file_remove_suid(out);
- if (likely(!ret)) {
- if (pipe->inode)
- mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD);
- ret = __splice_from_pipe(pipe, &sd, pipe_to_file);
- if (pipe->inode)
- mutex_unlock(&pipe->inode->i_mutex);
- }
- mutex_unlock(&inode->i_mutex);
+ pipe_lock(pipe);
+
+ splice_from_pipe_begin(&sd);
+ do {
+ ret = splice_from_pipe_next(pipe, &sd);
+ if (ret <= 0)
+ break;
+
+ mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
+ ret = file_remove_suid(out);
+ if (!ret)
+ ret = splice_from_pipe_feed(pipe, &sd, pipe_to_file);
+ mutex_unlock(&inode->i_mutex);
+ } while (ret > 0);
+ splice_from_pipe_end(pipe, &sd);
+
+ pipe_unlock(pipe);
+
+ if (sd.num_spliced)
+ ret = sd.num_spliced;
+
if (ret > 0) {
unsigned long nr_pages;
@@ -1339,8 +1340,7 @@
if (!pipe)
return -EBADF;
- if (pipe->inode)
- mutex_lock(&pipe->inode->i_mutex);
+ pipe_lock(pipe);
error = ret = 0;
while (nr_segs) {
@@ -1395,8 +1395,7 @@
iov++;
}
- if (pipe->inode)
- mutex_unlock(&pipe->inode->i_mutex);
+ pipe_unlock(pipe);
if (!ret)
ret = error;
@@ -1524,7 +1523,7 @@
return 0;
ret = 0;
- mutex_lock(&pipe->inode->i_mutex);
+ pipe_lock(pipe);
while (!pipe->nrbufs) {
if (signal_pending(current)) {
@@ -1542,7 +1541,7 @@
pipe_wait(pipe);
}
- mutex_unlock(&pipe->inode->i_mutex);
+ pipe_unlock(pipe);
return ret;
}
@@ -1562,7 +1561,7 @@
return 0;
ret = 0;
- mutex_lock(&pipe->inode->i_mutex);
+ pipe_lock(pipe);
while (pipe->nrbufs >= PIPE_BUFFERS) {
if (!pipe->readers) {
@@ -1583,7 +1582,7 @@
pipe->waiting_writers--;
}
- mutex_unlock(&pipe->inode->i_mutex);
+ pipe_unlock(pipe);
return ret;
}
@@ -1599,10 +1598,10 @@
/*
* Potential ABBA deadlock, work around it by ordering lock
- * grabbing by inode address. Otherwise two different processes
+ * grabbing by pipe info address. Otherwise two different processes
* could deadlock (one doing tee from A -> B, the other from B -> A).
*/
- inode_double_lock(ipipe->inode, opipe->inode);
+ pipe_double_lock(ipipe, opipe);
do {
if (!opipe->readers) {
@@ -1653,7 +1652,8 @@
if (!ret && ipipe->waiting_writers && (flags & SPLICE_F_NONBLOCK))
ret = -EAGAIN;
- inode_double_unlock(ipipe->inode, opipe->inode);
+ pipe_unlock(ipipe);
+ pipe_unlock(opipe);
/*
* If we put data in the output pipe, wakeup any potential readers.
diff --git a/fs/stat.c b/fs/stat.c
index 2db740a..075694e 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -55,46 +55,6 @@
EXPORT_SYMBOL(vfs_getattr);
-int vfs_stat_fd(int dfd, char __user *name, struct kstat *stat)
-{
- struct path path;
- int error;
-
- error = user_path_at(dfd, name, LOOKUP_FOLLOW, &path);
- if (!error) {
- error = vfs_getattr(path.mnt, path.dentry, stat);
- path_put(&path);
- }
- return error;
-}
-
-int vfs_stat(char __user *name, struct kstat *stat)
-{
- return vfs_stat_fd(AT_FDCWD, name, stat);
-}
-
-EXPORT_SYMBOL(vfs_stat);
-
-int vfs_lstat_fd(int dfd, char __user *name, struct kstat *stat)
-{
- struct path path;
- int error;
-
- error = user_path_at(dfd, name, 0, &path);
- if (!error) {
- error = vfs_getattr(path.mnt, path.dentry, stat);
- path_put(&path);
- }
- return error;
-}
-
-int vfs_lstat(char __user *name, struct kstat *stat)
-{
- return vfs_lstat_fd(AT_FDCWD, name, stat);
-}
-
-EXPORT_SYMBOL(vfs_lstat);
-
int vfs_fstat(unsigned int fd, struct kstat *stat)
{
struct file *f = fget(fd);
@@ -106,9 +66,44 @@
}
return error;
}
-
EXPORT_SYMBOL(vfs_fstat);
+int vfs_fstatat(int dfd, char __user *filename, struct kstat *stat, int flag)
+{
+ struct path path;
+ int error = -EINVAL;
+ int lookup_flags = 0;
+
+ if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+ goto out;
+
+ if (!(flag & AT_SYMLINK_NOFOLLOW))
+ lookup_flags |= LOOKUP_FOLLOW;
+
+ error = user_path_at(dfd, filename, lookup_flags, &path);
+ if (error)
+ goto out;
+
+ error = vfs_getattr(path.mnt, path.dentry, stat);
+ path_put(&path);
+out:
+ return error;
+}
+EXPORT_SYMBOL(vfs_fstatat);
+
+int vfs_stat(char __user *name, struct kstat *stat)
+{
+ return vfs_fstatat(AT_FDCWD, name, stat, 0);
+}
+EXPORT_SYMBOL(vfs_stat);
+
+int vfs_lstat(char __user *name, struct kstat *stat)
+{
+ return vfs_fstatat(AT_FDCWD, name, stat, AT_SYMLINK_NOFOLLOW);
+}
+EXPORT_SYMBOL(vfs_lstat);
+
+
#ifdef __ARCH_WANT_OLD_STAT
/*
@@ -155,23 +150,25 @@
SYSCALL_DEFINE2(stat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
{
struct kstat stat;
- int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
+ int error;
- if (!error)
- error = cp_old_stat(&stat, statbuf);
+ error = vfs_stat(filename, &stat);
+ if (error)
+ return error;
- return error;
+ return cp_old_stat(&stat, statbuf);
}
SYSCALL_DEFINE2(lstat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
{
struct kstat stat;
- int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
+ int error;
- if (!error)
- error = cp_old_stat(&stat, statbuf);
+ error = vfs_lstat(filename, &stat);
+ if (error)
+ return error;
- return error;
+ return cp_old_stat(&stat, statbuf);
}
SYSCALL_DEFINE2(fstat, unsigned int, fd, struct __old_kernel_stat __user *, statbuf)
@@ -240,23 +237,23 @@
SYSCALL_DEFINE2(newstat, char __user *, filename, struct stat __user *, statbuf)
{
struct kstat stat;
- int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
+ int error = vfs_stat(filename, &stat);
- if (!error)
- error = cp_new_stat(&stat, statbuf);
-
- return error;
+ if (error)
+ return error;
+ return cp_new_stat(&stat, statbuf);
}
SYSCALL_DEFINE2(newlstat, char __user *, filename, struct stat __user *, statbuf)
{
struct kstat stat;
- int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
+ int error;
- if (!error)
- error = cp_new_stat(&stat, statbuf);
+ error = vfs_lstat(filename, &stat);
+ if (error)
+ return error;
- return error;
+ return cp_new_stat(&stat, statbuf);
}
#if !defined(__ARCH_WANT_STAT64) || defined(__ARCH_WANT_SYS_NEWFSTATAT)
@@ -264,21 +261,12 @@
struct stat __user *, statbuf, int, flag)
{
struct kstat stat;
- int error = -EINVAL;
+ int error;
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_new_stat(&stat, statbuf);
-
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_new_stat(&stat, statbuf);
}
#endif
@@ -404,21 +392,12 @@
struct stat64 __user *, statbuf, int, flag)
{
struct kstat stat;
- int error = -EINVAL;
+ int error;
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_new_stat64(&stat, statbuf);
-
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_new_stat64(&stat, statbuf);
}
#endif /* __ARCH_WANT_STAT64 */
diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
index 93e0c02..9345806 100644
--- a/fs/sysfs/bin.c
+++ b/fs/sysfs/bin.c
@@ -157,14 +157,9 @@
count = size - offs;
}
- temp = kmalloc(count, GFP_KERNEL);
- if (!temp)
- return -ENOMEM;
-
- if (copy_from_user(temp, userbuf, count)) {
- count = -EFAULT;
- goto out_free;
- }
+ temp = memdup_user(userbuf, count);
+ if (IS_ERR(temp))
+ return PTR_ERR(temp);
mutex_lock(&bb->mutex);
@@ -176,8 +171,6 @@
if (count > 0)
*off = offs + count;
-out_free:
- kfree(temp);
return count;
}
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 289c43a..b1606e0 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -446,11 +446,11 @@
if (buffer->event != atomic_read(&od->event))
goto trigger;
- return 0;
+ return DEFAULT_POLLMASK;
trigger:
buffer->needs_read_fill = 1;
- return POLLERR|POLLPRI;
+ return DEFAULT_POLLMASK|POLLERR|POLLPRI;
}
void sysfs_notify_dirent(struct sysfs_dirent *sd)
@@ -667,6 +667,7 @@
struct work_struct work;
};
+static struct workqueue_struct *sysfs_workqueue;
static DEFINE_MUTEX(sysfs_workq_mutex);
static LIST_HEAD(sysfs_workq);
static void sysfs_schedule_callback_work(struct work_struct *work)
@@ -715,11 +716,20 @@
mutex_lock(&sysfs_workq_mutex);
list_for_each_entry_safe(ss, tmp, &sysfs_workq, workq_list)
if (ss->kobj == kobj) {
+ module_put(owner);
mutex_unlock(&sysfs_workq_mutex);
return -EAGAIN;
}
mutex_unlock(&sysfs_workq_mutex);
+ if (sysfs_workqueue == NULL) {
+ sysfs_workqueue = create_workqueue("sysfsd");
+ if (sysfs_workqueue == NULL) {
+ module_put(owner);
+ return -ENOMEM;
+ }
+ }
+
ss = kmalloc(sizeof(*ss), GFP_KERNEL);
if (!ss) {
module_put(owner);
@@ -735,7 +745,7 @@
mutex_lock(&sysfs_workq_mutex);
list_add_tail(&ss->workq_list, &sysfs_workq);
mutex_unlock(&sysfs_workq_mutex);
- schedule_work(&ss->work);
+ queue_work(sysfs_workqueue, &ss->work);
return 0;
}
EXPORT_SYMBOL_GPL(sysfs_schedule_callback);
diff --git a/fs/xattr.c b/fs/xattr.c
index 197c4fc..d51b8f9 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -237,13 +237,9 @@
if (size) {
if (size > XATTR_SIZE_MAX)
return -E2BIG;
- kvalue = kmalloc(size, GFP_KERNEL);
- if (!kvalue)
- return -ENOMEM;
- if (copy_from_user(kvalue, value, size)) {
- kfree(kvalue);
- return -EFAULT;
- }
+ kvalue = memdup_user(value, size);
+ if (IS_ERR(kvalue))
+ return PTR_ERR(kvalue);
}
error = vfs_setxattr(d, kname, kvalue, size, flags);
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index c13f673..7ec89fc 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -153,23 +153,6 @@
}
/*
- * Schedule IO completion handling on a xfsdatad if this was
- * the final hold on this ioend. If we are asked to wait,
- * flush the workqueue.
- */
-STATIC void
-xfs_finish_ioend(
- xfs_ioend_t *ioend,
- int wait)
-{
- if (atomic_dec_and_test(&ioend->io_remaining)) {
- queue_work(xfsdatad_workqueue, &ioend->io_work);
- if (wait)
- flush_workqueue(xfsdatad_workqueue);
- }
-}
-
-/*
* We're now finished for good with this ioend structure.
* Update the page state via the associated buffer_heads,
* release holds on the inode and bio, and finally free
@@ -310,6 +293,27 @@
}
/*
+ * Schedule IO completion handling on a xfsdatad if this was
+ * the final hold on this ioend. If we are asked to wait,
+ * flush the workqueue.
+ */
+STATIC void
+xfs_finish_ioend(
+ xfs_ioend_t *ioend,
+ int wait)
+{
+ if (atomic_dec_and_test(&ioend->io_remaining)) {
+ struct workqueue_struct *wq = xfsdatad_workqueue;
+ if (ioend->io_work.func == xfs_end_bio_unwritten)
+ wq = xfsconvertd_workqueue;
+
+ queue_work(wq, &ioend->io_work);
+ if (wait)
+ flush_workqueue(wq);
+ }
+}
+
+/*
* Allocate and initialise an IO completion structure.
* We need to track unwritten extent write completion here initially.
* We'll need to extend this for updating the ondisk inode size later
diff --git a/fs/xfs/linux-2.6/xfs_aops.h b/fs/xfs/linux-2.6/xfs_aops.h
index 1dd5288..221b3e6 100644
--- a/fs/xfs/linux-2.6/xfs_aops.h
+++ b/fs/xfs/linux-2.6/xfs_aops.h
@@ -19,6 +19,7 @@
#define __XFS_AOPS_H__
extern struct workqueue_struct *xfsdatad_workqueue;
+extern struct workqueue_struct *xfsconvertd_workqueue;
extern mempool_t *xfs_ioend_pool;
/*
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index aa1016b..e28800a 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -51,6 +51,7 @@
static struct workqueue_struct *xfslogd_workqueue;
struct workqueue_struct *xfsdatad_workqueue;
+struct workqueue_struct *xfsconvertd_workqueue;
#ifdef XFS_BUF_TRACE
void
@@ -1775,6 +1776,7 @@
xfs_buf_t *bp, *n;
int pincount = 0;
+ xfs_buf_runall_queues(xfsconvertd_workqueue);
xfs_buf_runall_queues(xfsdatad_workqueue);
xfs_buf_runall_queues(xfslogd_workqueue);
@@ -1831,9 +1833,15 @@
if (!xfsdatad_workqueue)
goto out_destroy_xfslogd_workqueue;
+ xfsconvertd_workqueue = create_workqueue("xfsconvertd");
+ if (!xfsconvertd_workqueue)
+ goto out_destroy_xfsdatad_workqueue;
+
register_shrinker(&xfs_buf_shake);
return 0;
+ out_destroy_xfsdatad_workqueue:
+ destroy_workqueue(xfsdatad_workqueue);
out_destroy_xfslogd_workqueue:
destroy_workqueue(xfslogd_workqueue);
out_free_buf_zone:
@@ -1849,6 +1857,7 @@
xfs_buf_terminate(void)
{
unregister_shrinker(&xfs_buf_shake);
+ destroy_workqueue(xfsconvertd_workqueue);
destroy_workqueue(xfsdatad_workqueue);
destroy_workqueue(xfslogd_workqueue);
kmem_zone_destroy(xfs_buf_zone);
diff --git a/fs/xfs/linux-2.6/xfs_fs_subr.c b/fs/xfs/linux-2.6/xfs_fs_subr.c
index 5aeb777..08be36d 100644
--- a/fs/xfs/linux-2.6/xfs_fs_subr.c
+++ b/fs/xfs/linux-2.6/xfs_fs_subr.c
@@ -74,14 +74,14 @@
if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
xfs_iflags_clear(ip, XFS_ITRUNCATED);
- ret = filemap_fdatawrite(mapping);
- if (flags & XFS_B_ASYNC)
- return -ret;
- ret2 = filemap_fdatawait(mapping);
- if (!ret)
- ret = ret2;
+ ret = -filemap_fdatawrite(mapping);
}
- return -ret;
+ if (flags & XFS_B_ASYNC)
+ return ret;
+ ret2 = xfs_wait_on_pages(ip, first, last);
+ if (!ret)
+ ret = ret2;
+ return ret;
}
int
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index d0b4994..34eaab6 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -489,17 +489,12 @@
if (len > XATTR_SIZE_MAX)
return EINVAL;
- kbuf = kmalloc(len, GFP_KERNEL);
- if (!kbuf)
- return ENOMEM;
-
- if (copy_from_user(kbuf, ubuf, len))
- goto out_kfree;
+ kbuf = memdup_user(ubuf, len);
+ if (IS_ERR(kbuf))
+ return PTR_ERR(kbuf);
error = xfs_attr_set(XFS_I(inode), name, kbuf, len, flags);
- out_kfree:
- kfree(kbuf);
return error;
}
@@ -540,20 +535,16 @@
if (!size || size > 16 * PAGE_SIZE)
goto out_dput;
- error = ENOMEM;
- ops = kmalloc(size, GFP_KERNEL);
- if (!ops)
+ ops = memdup_user(am_hreq.ops, size);
+ if (IS_ERR(ops)) {
+ error = PTR_ERR(ops);
goto out_dput;
-
- error = EFAULT;
- if (copy_from_user(ops, am_hreq.ops, size))
- goto out_kfree_ops;
+ }
attr_name = kmalloc(MAXNAMELEN, GFP_KERNEL);
if (!attr_name)
goto out_kfree_ops;
-
error = 0;
for (i = 0; i < am_hreq.opcount; i++) {
ops[i].am_error = strncpy_from_user(attr_name,
diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c
index c70c4e3..0882d16 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl32.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl32.c
@@ -427,20 +427,16 @@
if (!size || size > 16 * PAGE_SIZE)
goto out_dput;
- error = ENOMEM;
- ops = kmalloc(size, GFP_KERNEL);
- if (!ops)
+ ops = memdup_user(compat_ptr(am_hreq.ops), size);
+ if (IS_ERR(ops)) {
+ error = PTR_ERR(ops);
goto out_dput;
-
- error = EFAULT;
- if (copy_from_user(ops, compat_ptr(am_hreq.ops), size))
- goto out_kfree_ops;
+ }
attr_name = kmalloc(MAXNAMELEN, GFP_KERNEL);
if (!attr_name)
goto out_kfree_ops;
-
error = 0;
for (i = 0; i < am_hreq.opcount; i++) {
ops[i].am_error = strncpy_from_user(attr_name,
diff --git a/fs/xfs/linux-2.6/xfs_lrw.c b/fs/xfs/linux-2.6/xfs_lrw.c
index 7e90daa..9142192 100644
--- a/fs/xfs/linux-2.6/xfs_lrw.c
+++ b/fs/xfs/linux-2.6/xfs_lrw.c
@@ -751,10 +751,26 @@
goto relock;
}
} else {
+ int enospc = 0;
+ ssize_t ret2 = 0;
+
+write_retry:
xfs_rw_enter_trace(XFS_WRITE_ENTER, xip, (void *)iovp, segs,
*offset, ioflags);
- ret = generic_file_buffered_write(iocb, iovp, segs,
+ ret2 = generic_file_buffered_write(iocb, iovp, segs,
pos, offset, count, ret);
+ /*
+ * if we just got an ENOSPC, flush the inode now we
+ * aren't holding any page locks and retry *once*
+ */
+ if (ret2 == -ENOSPC && !enospc) {
+ error = xfs_flush_pages(xip, 0, -1, 0, FI_NONE);
+ if (error)
+ goto out_unlock_internal;
+ enospc = 1;
+ goto write_retry;
+ }
+ ret = ret2;
}
current->backing_dev_info = NULL;
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index a608e72..f7ba766 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -62,12 +62,6 @@
uint32_t first_index = 0;
int error = 0;
int last_error = 0;
- int fflag = XFS_B_ASYNC;
-
- if (flags & SYNC_DELWRI)
- fflag = XFS_B_DELWRI;
- if (flags & SYNC_WAIT)
- fflag = 0; /* synchronous overrides all */
do {
struct inode *inode;
@@ -128,11 +122,23 @@
* If we have to flush data or wait for I/O completion
* we need to hold the iolock.
*/
- if ((flags & SYNC_DELWRI) && VN_DIRTY(inode)) {
- xfs_ilock(ip, XFS_IOLOCK_SHARED);
- lock_flags |= XFS_IOLOCK_SHARED;
- error = xfs_flush_pages(ip, 0, -1, fflag, FI_NONE);
- if (flags & SYNC_IOWAIT)
+ if (flags & SYNC_DELWRI) {
+ if (VN_DIRTY(inode)) {
+ if (flags & SYNC_TRYLOCK) {
+ if (xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED))
+ lock_flags |= XFS_IOLOCK_SHARED;
+ } else {
+ xfs_ilock(ip, XFS_IOLOCK_SHARED);
+ lock_flags |= XFS_IOLOCK_SHARED;
+ }
+ if (lock_flags & XFS_IOLOCK_SHARED) {
+ error = xfs_flush_pages(ip, 0, -1,
+ (flags & SYNC_WAIT) ? 0
+ : XFS_B_ASYNC,
+ FI_NONE);
+ }
+ }
+ if (VN_CACHED(inode) && (flags & SYNC_IOWAIT))
xfs_ioend_wait(ip);
}
xfs_ilock(ip, XFS_ILOCK_SHARED);
@@ -398,15 +404,17 @@
xfs_syncd_queue_work(
struct xfs_mount *mp,
void *data,
- void (*syncer)(struct xfs_mount *, void *))
+ void (*syncer)(struct xfs_mount *, void *),
+ struct completion *completion)
{
- struct bhv_vfs_sync_work *work;
+ struct xfs_sync_work *work;
- work = kmem_alloc(sizeof(struct bhv_vfs_sync_work), KM_SLEEP);
+ work = kmem_alloc(sizeof(struct xfs_sync_work), KM_SLEEP);
INIT_LIST_HEAD(&work->w_list);
work->w_syncer = syncer;
work->w_data = data;
work->w_mount = mp;
+ work->w_completion = completion;
spin_lock(&mp->m_sync_lock);
list_add_tail(&work->w_list, &mp->m_sync_list);
spin_unlock(&mp->m_sync_lock);
@@ -420,49 +428,26 @@
* heads, looking about for more room...
*/
STATIC void
-xfs_flush_inode_work(
+xfs_flush_inodes_work(
struct xfs_mount *mp,
void *arg)
{
struct inode *inode = arg;
- filemap_flush(inode->i_mapping);
+ xfs_sync_inodes(mp, SYNC_DELWRI | SYNC_TRYLOCK);
+ xfs_sync_inodes(mp, SYNC_DELWRI | SYNC_TRYLOCK | SYNC_IOWAIT);
iput(inode);
}
void
-xfs_flush_inode(
+xfs_flush_inodes(
xfs_inode_t *ip)
{
struct inode *inode = VFS_I(ip);
+ DECLARE_COMPLETION_ONSTACK(completion);
igrab(inode);
- xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inode_work);
- delay(msecs_to_jiffies(500));
-}
-
-/*
- * This is the "bigger hammer" version of xfs_flush_inode_work...
- * (IOW, "If at first you don't succeed, use a Bigger Hammer").
- */
-STATIC void
-xfs_flush_device_work(
- struct xfs_mount *mp,
- void *arg)
-{
- struct inode *inode = arg;
- sync_blockdev(mp->m_super->s_bdev);
- iput(inode);
-}
-
-void
-xfs_flush_device(
- xfs_inode_t *ip)
-{
- struct inode *inode = VFS_I(ip);
-
- igrab(inode);
- xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_device_work);
- delay(msecs_to_jiffies(500));
+ xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inodes_work, &completion);
+ wait_for_completion(&completion);
xfs_log_force(ip->i_mount, (xfs_lsn_t)0, XFS_LOG_FORCE|XFS_LOG_SYNC);
}
@@ -497,7 +482,7 @@
{
struct xfs_mount *mp = arg;
long timeleft;
- bhv_vfs_sync_work_t *work, *n;
+ xfs_sync_work_t *work, *n;
LIST_HEAD (tmp);
set_freezable();
@@ -532,6 +517,8 @@
list_del(&work->w_list);
if (work == &mp->m_sync_work)
continue;
+ if (work->w_completion)
+ complete(work->w_completion);
kmem_free(work);
}
}
@@ -545,6 +532,7 @@
{
mp->m_sync_work.w_syncer = xfs_sync_worker;
mp->m_sync_work.w_mount = mp;
+ mp->m_sync_work.w_completion = NULL;
mp->m_sync_task = kthread_run(xfssyncd, mp, "xfssyncd");
if (IS_ERR(mp->m_sync_task))
return -PTR_ERR(mp->m_sync_task);
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index 04f058c..308d5bf 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -21,18 +21,20 @@
struct xfs_mount;
struct xfs_perag;
-typedef struct bhv_vfs_sync_work {
+typedef struct xfs_sync_work {
struct list_head w_list;
struct xfs_mount *w_mount;
void *w_data; /* syncer routine argument */
void (*w_syncer)(struct xfs_mount *, void *);
-} bhv_vfs_sync_work_t;
+ struct completion *w_completion;
+} xfs_sync_work_t;
#define SYNC_ATTR 0x0001 /* sync attributes */
#define SYNC_DELWRI 0x0002 /* look at delayed writes */
#define SYNC_WAIT 0x0004 /* wait for i/o to complete */
#define SYNC_BDFLUSH 0x0008 /* BDFLUSH is calling -- don't block */
#define SYNC_IOWAIT 0x0010 /* wait for all I/O to complete */
+#define SYNC_TRYLOCK 0x0020 /* only try to lock inodes */
int xfs_syncd_init(struct xfs_mount *mp);
void xfs_syncd_stop(struct xfs_mount *mp);
@@ -43,8 +45,7 @@
int xfs_quiesce_data(struct xfs_mount *mp);
void xfs_quiesce_attr(struct xfs_mount *mp);
-void xfs_flush_inode(struct xfs_inode *ip);
-void xfs_flush_device(struct xfs_inode *ip);
+void xfs_flush_inodes(struct xfs_inode *ip);
int xfs_reclaim_inode(struct xfs_inode *ip, int locked, int sync_mode);
int xfs_reclaim_inodes(struct xfs_mount *mp, int noblock, int mode);
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index 478e587..89b81ee 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -69,15 +69,6 @@
ASSERT(!spin_is_locked(&ip->i_flags_lock));
ASSERT(completion_done(&ip->i_flush));
- /*
- * initialise the VFS inode here to get failures
- * out of the way early.
- */
- if (!inode_init_always(mp->m_super, VFS_I(ip))) {
- kmem_zone_free(xfs_inode_zone, ip);
- return NULL;
- }
-
/* initialise the xfs inode */
ip->i_ino = ino;
ip->i_mount = mp;
@@ -113,6 +104,20 @@
#ifdef XFS_DIR2_TRACE
ip->i_dir_trace = ktrace_alloc(XFS_DIR2_KTRACE_SIZE, KM_NOFS);
#endif
+ /*
+ * Now initialise the VFS inode. We do this after the xfs_inode
+ * initialisation as internal failures will result in ->destroy_inode
+ * being called and that will pass down through the reclaim path and
+ * free the XFS inode. This path requires the XFS inode to already be
+ * initialised. Hence if this call fails, the xfs_inode has already
+ * been freed and we should not reference it at all in the error
+ * handling.
+ */
+ if (!inode_init_always(mp->m_super, VFS_I(ip)))
+ return NULL;
+
+ /* prevent anyone from using this yet */
+ VFS_I(ip)->i_state = I_NEW|I_LOCK;
return ip;
}
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 08ce723..5aaa2d7 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -338,38 +338,6 @@
}
STATIC int
-xfs_flush_space(
- xfs_inode_t *ip,
- int *fsynced,
- int *ioflags)
-{
- switch (*fsynced) {
- case 0:
- if (ip->i_delayed_blks) {
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
- xfs_flush_inode(ip);
- xfs_ilock(ip, XFS_ILOCK_EXCL);
- *fsynced = 1;
- } else {
- *ioflags |= BMAPI_SYNC;
- *fsynced = 2;
- }
- return 0;
- case 1:
- *fsynced = 2;
- *ioflags |= BMAPI_SYNC;
- return 0;
- case 2:
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
- xfs_flush_device(ip);
- xfs_ilock(ip, XFS_ILOCK_EXCL);
- *fsynced = 3;
- return 0;
- }
- return 1;
-}
-
-STATIC int
xfs_cmn_err_fsblock_zero(
xfs_inode_t *ip,
xfs_bmbt_irec_t *imap)
@@ -538,15 +506,9 @@
}
/*
- * If the caller is doing a write at the end of the file,
- * then extend the allocation out to the file system's write
- * iosize. We clean up any extra space left over when the
- * file is closed in xfs_inactive().
- *
- * For sync writes, we are flushing delayed allocate space to
- * try to make additional space available for allocation near
- * the filesystem full boundary - preallocation hurts in that
- * situation, of course.
+ * If the caller is doing a write at the end of the file, then extend the
+ * allocation out to the file system's write iosize. We clean up any extra
+ * space left over when the file is closed in xfs_inactive().
*/
STATIC int
xfs_iomap_eof_want_preallocate(
@@ -565,7 +527,7 @@
int n, error, imaps;
*prealloc = 0;
- if ((ioflag & BMAPI_SYNC) || (offset + count) <= ip->i_size)
+ if ((offset + count) <= ip->i_size)
return 0;
/*
@@ -611,7 +573,7 @@
xfs_extlen_t extsz;
int nimaps;
xfs_bmbt_irec_t imap[XFS_WRITE_IMAPS];
- int prealloc, fsynced = 0;
+ int prealloc, flushed = 0;
int error;
ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
@@ -627,12 +589,12 @@
extsz = xfs_get_extsz_hint(ip);
offset_fsb = XFS_B_TO_FSBT(mp, offset);
-retry:
error = xfs_iomap_eof_want_preallocate(mp, ip, offset, count,
ioflag, imap, XFS_WRITE_IMAPS, &prealloc);
if (error)
return error;
+retry:
if (prealloc) {
aligned_offset = XFS_WRITEIO_ALIGN(mp, (offset + count - 1));
ioalign = XFS_B_TO_FSBT(mp, aligned_offset);
@@ -659,15 +621,22 @@
/*
* If bmapi returned us nothing, and if we didn't get back EDQUOT,
- * then we must have run out of space - flush delalloc, and retry..
+ * then we must have run out of space - flush all other inodes with
+ * delalloc blocks and retry without EOF preallocation.
*/
if (nimaps == 0) {
xfs_iomap_enter_trace(XFS_IOMAP_WRITE_NOSPACE,
ip, offset, count);
- if (xfs_flush_space(ip, &fsynced, &ioflag))
+ if (flushed)
return XFS_ERROR(ENOSPC);
+ xfs_iunlock(ip, XFS_ILOCK_EXCL);
+ xfs_flush_inodes(ip);
+ xfs_ilock(ip, XFS_ILOCK_EXCL);
+
+ flushed = 1;
error = 0;
+ prealloc = 0;
goto retry;
}
diff --git a/fs/xfs/xfs_iomap.h b/fs/xfs/xfs_iomap.h
index a1cc132..fdcf7b8 100644
--- a/fs/xfs/xfs_iomap.h
+++ b/fs/xfs/xfs_iomap.h
@@ -40,8 +40,7 @@
BMAPI_IGNSTATE = (1 << 4), /* ignore unwritten state on read */
BMAPI_DIRECT = (1 << 5), /* direct instead of buffered write */
BMAPI_MMAP = (1 << 6), /* allocate for mmap write */
- BMAPI_SYNC = (1 << 7), /* sync write to flush delalloc space */
- BMAPI_TRYLOCK = (1 << 8), /* non-blocking request */
+ BMAPI_TRYLOCK = (1 << 7), /* non-blocking request */
} bmapi_flags_t;
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index f76c6d7..3750f04 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -562,9 +562,8 @@
}
mp->m_log = xlog_alloc_log(mp, log_target, blk_offset, num_bblks);
- if (!mp->m_log) {
- cmn_err(CE_WARN, "XFS: Log allocation failed: No memory!");
- error = ENOMEM;
+ if (IS_ERR(mp->m_log)) {
+ error = -PTR_ERR(mp->m_log);
goto out;
}
@@ -1180,10 +1179,13 @@
xfs_buf_t *bp;
int i;
int iclogsize;
+ int error = ENOMEM;
log = kmem_zalloc(sizeof(xlog_t), KM_MAYFAIL);
- if (!log)
- return NULL;
+ if (!log) {
+ xlog_warn("XFS: Log allocation failed: No memory!");
+ goto out;
+ }
log->l_mp = mp;
log->l_targ = log_target;
@@ -1201,19 +1203,35 @@
log->l_grant_reserve_cycle = 1;
log->l_grant_write_cycle = 1;
+ error = EFSCORRUPTED;
if (xfs_sb_version_hassector(&mp->m_sb)) {
log->l_sectbb_log = mp->m_sb.sb_logsectlog - BBSHIFT;
- ASSERT(log->l_sectbb_log <= mp->m_sectbb_log);
+ if (log->l_sectbb_log < 0 ||
+ log->l_sectbb_log > mp->m_sectbb_log) {
+ xlog_warn("XFS: Log sector size (0x%x) out of range.",
+ log->l_sectbb_log);
+ goto out_free_log;
+ }
+
/* for larger sector sizes, must have v2 or external log */
- ASSERT(log->l_sectbb_log == 0 ||
- log->l_logBBstart == 0 ||
- xfs_sb_version_haslogv2(&mp->m_sb));
- ASSERT(mp->m_sb.sb_logsectlog >= BBSHIFT);
+ if (log->l_sectbb_log != 0 &&
+ (log->l_logBBstart != 0 &&
+ !xfs_sb_version_haslogv2(&mp->m_sb))) {
+ xlog_warn("XFS: log sector size (0x%x) invalid "
+ "for configuration.", log->l_sectbb_log);
+ goto out_free_log;
+ }
+ if (mp->m_sb.sb_logsectlog < BBSHIFT) {
+ xlog_warn("XFS: Log sector log (0x%x) too small.",
+ mp->m_sb.sb_logsectlog);
+ goto out_free_log;
+ }
}
log->l_sectbb_mask = (1 << log->l_sectbb_log) - 1;
xlog_get_iclog_buffer_size(mp, log);
+ error = ENOMEM;
bp = xfs_buf_get_empty(log->l_iclog_size, mp->m_logdev_targp);
if (!bp)
goto out_free_log;
@@ -1313,7 +1331,8 @@
xfs_buf_free(log->l_xbuf);
out_free_log:
kmem_free(log);
- return NULL;
+out:
+ return ERR_PTR(-error);
} /* xlog_alloc_log */
@@ -2541,18 +2560,19 @@
xlog_ins_ticketq(&log->l_reserve_headq, tic);
xlog_trace_loggrant(log, tic,
"xlog_grant_log_space: sleep 2");
+ spin_unlock(&log->l_grant_lock);
+ xlog_grant_push_ail(log->l_mp, need_bytes);
+ spin_lock(&log->l_grant_lock);
+
XFS_STATS_INC(xs_sleep_logspace);
sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
- if (XLOG_FORCED_SHUTDOWN(log)) {
- spin_lock(&log->l_grant_lock);
+ spin_lock(&log->l_grant_lock);
+ if (XLOG_FORCED_SHUTDOWN(log))
goto error_return;
- }
xlog_trace_loggrant(log, tic,
"xlog_grant_log_space: wake 2");
- xlog_grant_push_ail(log->l_mp, need_bytes);
- spin_lock(&log->l_grant_lock);
goto redo;
} else if (tic->t_flags & XLOG_TIC_IN_Q)
xlog_del_ticketq(&log->l_reserve_headq, tic);
@@ -2631,7 +2651,7 @@
* for more free space, otherwise try to get some space for
* this transaction.
*/
-
+ need_bytes = tic->t_unit_res;
if ((ntic = log->l_write_headq)) {
free_bytes = xlog_space_left(log, log->l_grant_write_cycle,
log->l_grant_write_bytes);
@@ -2651,26 +2671,25 @@
xlog_trace_loggrant(log, tic,
"xlog_regrant_write_log_space: sleep 1");
+ spin_unlock(&log->l_grant_lock);
+ xlog_grant_push_ail(log->l_mp, need_bytes);
+ spin_lock(&log->l_grant_lock);
+
XFS_STATS_INC(xs_sleep_logspace);
sv_wait(&tic->t_wait, PINOD|PLTWAIT,
&log->l_grant_lock, s);
/* If we're shutting down, this tic is already
* off the queue */
- if (XLOG_FORCED_SHUTDOWN(log)) {
- spin_lock(&log->l_grant_lock);
+ spin_lock(&log->l_grant_lock);
+ if (XLOG_FORCED_SHUTDOWN(log))
goto error_return;
- }
xlog_trace_loggrant(log, tic,
"xlog_regrant_write_log_space: wake 1");
- xlog_grant_push_ail(log->l_mp, tic->t_unit_res);
- spin_lock(&log->l_grant_lock);
}
}
- need_bytes = tic->t_unit_res;
-
redo:
if (XLOG_FORCED_SHUTDOWN(log))
goto error_return;
@@ -2680,19 +2699,20 @@
if (free_bytes < need_bytes) {
if ((tic->t_flags & XLOG_TIC_IN_Q) == 0)
xlog_ins_ticketq(&log->l_write_headq, tic);
+ spin_unlock(&log->l_grant_lock);
+ xlog_grant_push_ail(log->l_mp, need_bytes);
+ spin_lock(&log->l_grant_lock);
+
XFS_STATS_INC(xs_sleep_logspace);
sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
/* If we're shutting down, this tic is already off the queue */
- if (XLOG_FORCED_SHUTDOWN(log)) {
- spin_lock(&log->l_grant_lock);
+ spin_lock(&log->l_grant_lock);
+ if (XLOG_FORCED_SHUTDOWN(log))
goto error_return;
- }
xlog_trace_loggrant(log, tic,
"xlog_regrant_write_log_space: wake 2");
- xlog_grant_push_ail(log->l_mp, need_bytes);
- spin_lock(&log->l_grant_lock);
goto redo;
} else if (tic->t_flags & XLOG_TIC_IN_Q)
xlog_del_ticketq(&log->l_write_headq, tic);
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index 7af44ad..d6a6439 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -313,7 +313,7 @@
#endif
struct xfs_mru_cache *m_filestream; /* per-mount filestream data */
struct task_struct *m_sync_task; /* generalised sync thread */
- bhv_vfs_sync_work_t m_sync_work; /* work item for VFS_SYNC */
+ xfs_sync_work_t m_sync_work; /* work item for VFS_SYNC */
struct list_head m_sync_list; /* sync thread work item list */
spinlock_t m_sync_lock; /* work item list lock */
int m_sync_seq; /* sync thread generation no. */
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 7394c7a..19cf90a 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -1457,6 +1457,13 @@
error = xfs_trans_reserve(tp, resblks, log_res, 0,
XFS_TRANS_PERM_LOG_RES, log_count);
if (error == ENOSPC) {
+ /* flush outstanding delalloc blocks and retry */
+ xfs_flush_inodes(dp);
+ error = xfs_trans_reserve(tp, resblks, XFS_CREATE_LOG_RES(mp), 0,
+ XFS_TRANS_PERM_LOG_RES, XFS_CREATE_LOG_COUNT);
+ }
+ if (error == ENOSPC) {
+ /* No space at all so try a "no-allocation" reservation */
resblks = 0;
error = xfs_trans_reserve(tp, 0, log_res, 0,
XFS_TRANS_PERM_LOG_RES, log_count);
diff --git a/include/asm-arm/.gitignore b/include/asm-arm/.gitignore
deleted file mode 100644
index e02c15d..0000000
--- a/include/asm-arm/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-arch
-mach-types.h
diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index 37b82cb..e727fe0 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -88,7 +88,7 @@
#else /* !CONFIG_BUG */
#ifndef HAVE_ARCH_BUG
-#define BUG()
+#define BUG() do {} while(0)
#endif
#ifndef HAVE_ARCH_BUG_ON
diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h
index b0e63c6..d7d50d7 100644
--- a/include/asm-generic/percpu.h
+++ b/include/asm-generic/percpu.h
@@ -1,13 +1,9 @@
#ifndef _ASM_GENERIC_PERCPU_H_
#define _ASM_GENERIC_PERCPU_H_
+
#include <linux/compiler.h>
#include <linux/threads.h>
-
-/*
- * Determine the real variable name from the name visible in the
- * kernel sources.
- */
-#define per_cpu_var(var) per_cpu__##var
+#include <linux/percpu-defs.h>
#ifdef CONFIG_SMP
@@ -73,11 +69,32 @@
#endif /* SMP */
+#ifndef PER_CPU_BASE_SECTION
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+#endif
+
+#ifdef CONFIG_SMP
+
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
+#endif
+#define PER_CPU_FIRST_SECTION ".first"
+
+#else
+
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_FIRST_SECTION ""
+
+#endif
+
#ifndef PER_CPU_ATTRIBUTES
#define PER_CPU_ATTRIBUTES
#endif
-#define DECLARE_PER_CPU(type, name) extern PER_CPU_ATTRIBUTES \
- __typeof__(type) per_cpu_var(name)
-
#endif /* _ASM_GENERIC_PERCPU_H_ */
diff --git a/include/asm-generic/siginfo.h b/include/asm-generic/siginfo.h
index 35752da..c840719 100644
--- a/include/asm-generic/siginfo.h
+++ b/include/asm-generic/siginfo.h
@@ -201,7 +201,7 @@
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */
#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint/watchpoint */
-#define NSIGTRAP 2
+#define NSIGTRAP 4
/*
* SIGCHLD si_codes
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 2df74eb..9477af0 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -472,6 +472,7 @@
{0x8086, 0x2562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x3582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x358e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0, 0, 0}
#define gamma_PCI_IDS \
@@ -533,4 +534,5 @@
{0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0xa001, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0xa011, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+ {0x8086, 0x35e8, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0, 0, 0}
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
index 67e3353..95962fa 100644
--- a/include/drm/i915_drm.h
+++ b/include/drm/i915_drm.h
@@ -594,6 +594,9 @@
#define I915_BIT_6_SWIZZLE_9_10_11 4
/* Not seen by userland */
#define I915_BIT_6_SWIZZLE_UNKNOWN 5
+/* Seen by userland. */
+#define I915_BIT_6_SWIZZLE_9_17 6
+#define I915_BIT_6_SWIZZLE_9_10_17 7
struct drm_i915_gem_set_tiling {
/** Handle of the buffer to have its tiling state updated */
diff --git a/include/linux/bio.h b/include/linux/bio.h
index b900d2c6..b89cf2d 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -504,6 +504,115 @@
return bio && bio->bi_io_vec != NULL;
}
+/*
+ * BIO list managment for use by remapping drivers (e.g. DM or MD).
+ *
+ * A bio_list anchors a singly-linked list of bios chained through the bi_next
+ * member of the bio. The bio_list also caches the last list member to allow
+ * fast access to the tail.
+ */
+struct bio_list {
+ struct bio *head;
+ struct bio *tail;
+};
+
+static inline int bio_list_empty(const struct bio_list *bl)
+{
+ return bl->head == NULL;
+}
+
+static inline void bio_list_init(struct bio_list *bl)
+{
+ bl->head = bl->tail = NULL;
+}
+
+#define bio_list_for_each(bio, bl) \
+ for (bio = (bl)->head; bio; bio = bio->bi_next)
+
+static inline unsigned bio_list_size(const struct bio_list *bl)
+{
+ unsigned sz = 0;
+ struct bio *bio;
+
+ bio_list_for_each(bio, bl)
+ sz++;
+
+ return sz;
+}
+
+static inline void bio_list_add(struct bio_list *bl, struct bio *bio)
+{
+ bio->bi_next = NULL;
+
+ if (bl->tail)
+ bl->tail->bi_next = bio;
+ else
+ bl->head = bio;
+
+ bl->tail = bio;
+}
+
+static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio)
+{
+ bio->bi_next = bl->head;
+
+ bl->head = bio;
+
+ if (!bl->tail)
+ bl->tail = bio;
+}
+
+static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2)
+{
+ if (!bl2->head)
+ return;
+
+ if (bl->tail)
+ bl->tail->bi_next = bl2->head;
+ else
+ bl->head = bl2->head;
+
+ bl->tail = bl2->tail;
+}
+
+static inline void bio_list_merge_head(struct bio_list *bl,
+ struct bio_list *bl2)
+{
+ if (!bl2->head)
+ return;
+
+ if (bl->head)
+ bl2->tail->bi_next = bl->head;
+ else
+ bl->tail = bl2->tail;
+
+ bl->head = bl2->head;
+}
+
+static inline struct bio *bio_list_pop(struct bio_list *bl)
+{
+ struct bio *bio = bl->head;
+
+ if (bio) {
+ bl->head = bl->head->bi_next;
+ if (!bl->head)
+ bl->tail = NULL;
+
+ bio->bi_next = NULL;
+ }
+
+ return bio;
+}
+
+static inline struct bio *bio_list_get(struct bio_list *bl)
+{
+ struct bio *bio = bl->head;
+
+ bl->head = bl->tail = NULL;
+
+ return bio;
+}
+
#if defined(CONFIG_BLK_DEV_INTEGRITY)
#define bip_vec_idx(bip, idx) (&(bip->bip_vec[(idx)]))
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index 7b73bb8..16ed028 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -155,6 +155,7 @@
unsigned long b_state);
void end_buffer_read_sync(struct buffer_head *bh, int uptodate);
void end_buffer_write_sync(struct buffer_head *bh, int uptodate);
+void end_buffer_async_write(struct buffer_head *bh, int uptodate);
/* Things to do with buffers at mapping->private_list */
void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode);
@@ -197,6 +198,8 @@
void block_invalidatepage(struct page *page, unsigned long offset);
int block_write_full_page(struct page *page, get_block_t *get_block,
struct writeback_control *wbc);
+int block_write_full_page_endio(struct page *page, get_block_t *get_block,
+ struct writeback_control *wbc, bh_end_io_t *handler);
int block_read_full_page(struct page*, get_block_t*);
int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
unsigned long from);
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 573819ef..5a40d14 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -143,7 +143,9 @@
* 400-499: Perfect
* The ideal clocksource. A must-use where
* available.
- * @read: returns a cycle value
+ * @read: returns a cycle value, passes clocksource as argument
+ * @enable: optional function to enable the clocksource
+ * @disable: optional function to disable the clocksource
* @mask: bitmask for two's complement
* subtraction of non 64 bit counters
* @mult: cycle to nanosecond multiplier (adjusted by NTP)
@@ -162,7 +164,9 @@
char *name;
struct list_head list;
int rating;
- cycle_t (*read)(void);
+ cycle_t (*read)(struct clocksource *cs);
+ int (*enable)(struct clocksource *cs);
+ void (*disable)(struct clocksource *cs);
cycle_t mask;
u32 mult;
u32 mult_orig;
@@ -271,7 +275,34 @@
*/
static inline cycle_t clocksource_read(struct clocksource *cs)
{
- return cs->read();
+ return cs->read(cs);
+}
+
+/**
+ * clocksource_enable: - enable clocksource
+ * @cs: pointer to clocksource
+ *
+ * Enables the specified clocksource. The clocksource callback
+ * function should start up the hardware and setup mult and field
+ * members of struct clocksource to reflect hardware capabilities.
+ */
+static inline int clocksource_enable(struct clocksource *cs)
+{
+ return cs->enable ? cs->enable(cs) : 0;
+}
+
+/**
+ * clocksource_disable: - disable clocksource
+ * @cs: pointer to clocksource
+ *
+ * Disables the specified clocksource. The clocksource callback
+ * function should power down the now unused hardware block to
+ * save power.
+ */
+static inline void clocksource_disable(struct clocksource *cs)
+{
+ if (cs->disable)
+ cs->disable(cs);
}
/**
diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h
index 493dedb..29b3ce3f 100644
--- a/include/linux/debug_locks.h
+++ b/include/linux/debug_locks.h
@@ -3,6 +3,7 @@
#include <linux/kernel.h>
#include <asm/atomic.h>
+#include <asm/system.h>
struct task_struct;
diff --git a/include/linux/device.h b/include/linux/device.h
index 2918c0e..6a69caa 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -551,6 +551,7 @@
extern struct device *get_device(struct device *dev);
extern void put_device(struct device *dev);
+extern void wait_for_device_probe(void);
/* drivers/base/power/shutdown.c */
extern void device_shutdown(void);
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index baabf33..a0d9422 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -70,7 +70,7 @@
DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT }; \
if (__dynamic_dbg_enabled(descriptor)) \
dev_printk(KERN_DEBUG, dev, \
- KBUILD_MODNAME ": " pr_fmt(fmt),\
+ KBUILD_MODNAME ": " fmt, \
##__VA_ARGS__); \
} while (0)
diff --git a/include/linux/fb.h b/include/linux/fb.h
index f563c50..330c4b1 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -173,8 +173,12 @@
/* Interpretation of offset for color fields: All offsets are from the right,
* inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
* can use the offset as right argument to <<). A pixel afterwards is a bit
- * stream and is written to video memory as that unmodified. This implies
- * big-endian byte order if bits_per_pixel is greater than 8.
+ * stream and is written to video memory as that unmodified.
+ *
+ * For pseudocolor: offset and length should be the same for all color
+ * components. Offset specifies the position of the least significant bit
+ * of the pallette index in a pixel value. Length indicates the number
+ * of available palette entries (i.e. # of entries = 1 << length).
*/
struct fb_bitfield {
__u32 offset; /* beginning of bitfield */
diff --git a/include/linux/fiemap.h b/include/linux/fiemap.h
index 671decb..934e22d 100644
--- a/include/linux/fiemap.h
+++ b/include/linux/fiemap.h
@@ -11,6 +11,8 @@
#ifndef _LINUX_FIEMAP_H
#define _LINUX_FIEMAP_H
+#include <linux/types.h>
+
struct fiemap_extent {
__u64 fe_logical; /* logical offset in bytes for the start of
* the extent from the beginning of the file */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 562d285..5bed436 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -87,6 +87,60 @@
*/
#define FMODE_NOCMTIME ((__force fmode_t)2048)
+/*
+ * The below are the various read and write types that we support. Some of
+ * them include behavioral modifiers that send information down to the
+ * block layer and IO scheduler. Terminology:
+ *
+ * The block layer uses device plugging to defer IO a little bit, in
+ * the hope that we will see more IO very shortly. This increases
+ * coalescing of adjacent IO and thus reduces the number of IOs we
+ * have to send to the device. It also allows for better queuing,
+ * if the IO isn't mergeable. If the caller is going to be waiting
+ * for the IO, then he must ensure that the device is unplugged so
+ * that the IO is dispatched to the driver.
+ *
+ * All IO is handled async in Linux. This is fine for background
+ * writes, but for reads or writes that someone waits for completion
+ * on, we want to notify the block layer and IO scheduler so that they
+ * know about it. That allows them to make better scheduling
+ * decisions. So when the below references 'sync' and 'async', it
+ * is referencing this priority hint.
+ *
+ * With that in mind, the available types are:
+ *
+ * READ A normal read operation. Device will be plugged.
+ * READ_SYNC A synchronous read. Device is not plugged, caller can
+ * immediately wait on this read without caring about
+ * unplugging.
+ * READA Used for read-ahead operations. Lower priority, and the
+ * block layer could (in theory) choose to ignore this
+ * request if it runs into resource problems.
+ * WRITE A normal async write. Device will be plugged.
+ * SWRITE Like WRITE, but a special case for ll_rw_block() that
+ * tells it to lock the buffer first. Normally a buffer
+ * must be locked before doing IO.
+ * WRITE_SYNC_PLUG Synchronous write. Identical to WRITE, but passes down
+ * the hint that someone will be waiting on this IO
+ * shortly. The device must still be unplugged explicitly,
+ * WRITE_SYNC_PLUG does not do this as we could be
+ * submitting more writes before we actually wait on any
+ * of them.
+ * WRITE_SYNC Like WRITE_SYNC_PLUG, but also unplugs the device
+ * immediately after submission. The write equivalent
+ * of READ_SYNC.
+ * WRITE_ODIRECT Special case write for O_DIRECT only.
+ * SWRITE_SYNC
+ * SWRITE_SYNC_PLUG Like WRITE_SYNC/WRITE_SYNC_PLUG, but locks the buffer.
+ * See SWRITE.
+ * WRITE_BARRIER Like WRITE, but tells the block layer that all
+ * previously submitted writes must be safely on storage
+ * before this one is started. Also guarantees that when
+ * this write is complete, it itself is also safely on
+ * storage. Prevents reordering of writes on both sides
+ * of this IO.
+ *
+ */
#define RW_MASK 1
#define RWA_MASK 2
#define READ 0
@@ -102,6 +156,11 @@
(SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE))
#define SWRITE_SYNC (SWRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG))
#define WRITE_BARRIER (WRITE | (1 << BIO_RW_BARRIER))
+
+/*
+ * These aren't really reads or writes, they pass down information about
+ * parts of device that are now unused by the file system.
+ */
#define DISCARD_NOBARRIER (1 << BIO_RW_DISCARD)
#define DISCARD_BARRIER ((1 << BIO_RW_DISCARD) | (1 << BIO_RW_BARRIER))
@@ -738,9 +797,6 @@
I_MUTEX_QUOTA
};
-extern void inode_double_lock(struct inode *inode1, struct inode *inode2);
-extern void inode_double_unlock(struct inode *inode1, struct inode *inode2);
-
/*
* NOTE: in a 32bit arch with a preemptable kernel and
* an UP compile the i_size_read/write must be atomic
@@ -2150,8 +2206,6 @@
struct pipe_inode_info *, size_t, unsigned int);
extern ssize_t generic_file_splice_write(struct pipe_inode_info *,
struct file *, loff_t *, size_t, unsigned int);
-extern ssize_t generic_file_splice_write_nolock(struct pipe_inode_info *,
- struct file *, loff_t *, size_t, unsigned int);
extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe,
struct file *out, loff_t *, size_t len, unsigned int flags);
extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
@@ -2245,9 +2299,8 @@
extern int vfs_stat(char __user *, struct kstat *);
extern int vfs_lstat(char __user *, struct kstat *);
-extern int vfs_stat_fd(int dfd, char __user *, struct kstat *);
-extern int vfs_lstat_fd(int dfd, char __user *, struct kstat *);
extern int vfs_fstat(unsigned int, struct kstat *);
+extern int vfs_fstatat(int , char __user *, struct kstat *, int);
extern int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
unsigned long arg);
@@ -2395,7 +2448,7 @@
int proc_nr_files(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos);
-int get_filesystem_list(char * buf);
+int __init get_filesystem_list(char *buf);
#endif /* __KERNEL__ */
#endif /* _LINUX_FS_H */
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index f2a78b5..244677c 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -43,10 +43,6 @@
*
*/
-/* Flags related to I2C device features */
-#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001
-#define FSL_I2C_DEV_CLOCK_5200 0x00000002
-
enum fsl_usb2_operating_modes {
FSL_USB2_MPH_HOST,
FSL_USB2_DR_HOST,
@@ -83,6 +79,10 @@
u16 max_chipselect;
void (*cs_control)(struct spi_device *spi, bool on);
u32 sysclk;
+
+ /* Legacy hooks, used by mpc52xx_psc_spi driver. */
+ void (*activate_cs)(u8 cs, u8 polarity);
+ void (*deactivate_cs)(u8 cs, u8 polarity);
};
struct mpc8xx_pcmcia_ops {
diff --git a/include/linux/init.h b/include/linux/init.h
index 68cb0265..f121a7a 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -247,6 +247,7 @@
/* Relies on boot_command_line being set */
void __init parse_early_param(void);
+void __init parse_early_options(char *cmdline);
#endif /* __ASSEMBLY__ */
/**
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index dcfb933..d87247d 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -15,19 +15,6 @@
extern struct files_struct init_files;
extern struct fs_struct init_fs;
-#define INIT_KIOCTX(name, which_mm) \
-{ \
- .users = ATOMIC_INIT(1), \
- .dead = 0, \
- .mm = &which_mm, \
- .user_id = 0, \
- .next = NULL, \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER(name.wait), \
- .ctx_lock = __SPIN_LOCK_UNLOCKED(name.ctx_lock), \
- .reqs_active = 0U, \
- .max_reqs = ~0U, \
-}
-
#define INIT_MM(name) \
{ \
.mm_rb = RB_ROOT, \
diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h
index 7ebdb4f..65aae34 100644
--- a/include/linux/ipmi.h
+++ b/include/linux/ipmi.h
@@ -198,6 +198,8 @@
response. When you send a
response message, this will
be returned. */
+#define IPMI_OEM_RECV_TYPE 5 /* The response for OEM Channels */
+
/* Note that async events and received commands do not have a completion
code as the first byte of the incoming data, unlike a response. */
diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h
index b56a158..df97e6e 100644
--- a/include/linux/ipmi_msgdefs.h
+++ b/include/linux/ipmi_msgdefs.h
@@ -58,6 +58,12 @@
#define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35
#define IPMI_GET_CHANNEL_INFO_CMD 0x42
+/* Bit for BMC global enables. */
+#define IPMI_BMC_RCV_MSG_INTR 0x01
+#define IPMI_BMC_EVT_MSG_INTR 0x02
+#define IPMI_BMC_EVT_MSG_BUFF 0x04
+#define IPMI_BMC_SYS_LOG 0x08
+
#define IPMI_NETFN_STORAGE_REQUEST 0x0a
#define IPMI_NETFN_STORAGE_RESPONSE 0x0b
#define IPMI_ADD_SEL_ENTRY_CMD 0x44
@@ -109,5 +115,7 @@
#define IPMI_CHANNEL_MEDIUM_USB1 10
#define IPMI_CHANNEL_MEDIUM_USB2 11
#define IPMI_CHANNEL_MEDIUM_SYSINTF 12
+#define IPMI_CHANNEL_MEDIUM_OEM_MIN 0x60
+#define IPMI_CHANNEL_MEDIUM_OEM_MAX 0x7f
#endif /* __LINUX_IPMI_MSGDEFS_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index d9e75ec..883cd44 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -377,6 +377,15 @@
#define pr_cont(fmt, ...) \
printk(KERN_CONT fmt, ##__VA_ARGS__)
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
/* If you are writing a driver, please use dev_dbg instead */
#if defined(DEBUG)
#define pr_debug(fmt, ...) \
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b450a26..3d501db 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -209,6 +209,7 @@
/* bits 24:31 of ap->flags are reserved for LLD specific flags */
+
/* struct ata_port pflags */
ATA_PFLAG_EH_PENDING = (1 << 0), /* EH pending */
ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */
@@ -225,6 +226,9 @@
ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */
ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */
+ ATA_PFLAG_PIO32 = (1 << 20), /* 32bit PIO */
+ ATA_PFLAG_PIO32CHANGE = (1 << 21), /* 32bit PIO can be turned on/off */
+
/* struct ata_queued_cmd flags */
ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_DMAMAP = (1 << 1), /* SG table is DMA mapped */
@@ -689,7 +693,10 @@
struct Scsi_Host *scsi_host; /* our co-allocated scsi host */
struct ata_port_operations *ops;
spinlock_t *lock;
+ /* Flags owned by the EH context. Only EH should touch these once the
+ port is active */
unsigned long flags; /* ATA_FLAG_xxx */
+ /* Flags that change dynamically, protected by ap->lock */
unsigned int pflags; /* ATA_PFLAG_xxx */
unsigned int print_id; /* user visible unique port ID */
unsigned int port_no; /* 0 based port no. inside the host */
@@ -1595,6 +1602,7 @@
extern void ata_sff_error_handler(struct ata_port *ap);
extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc);
extern int ata_sff_port_start(struct ata_port *ap);
+extern int ata_sff_port_start32(struct ata_port *ap);
extern void ata_sff_std_ports(struct ata_ioports *ioaddr);
extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev,
unsigned long xfer_mask);
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 18146c9..a9e3b76 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -75,7 +75,7 @@
{
struct mem_cgroup *mem;
rcu_read_lock();
- mem = mem_cgroup_from_task((mm)->owner);
+ mem = mem_cgroup_from_task(rcu_dereference((mm)->owner));
rcu_read_unlock();
return cgroup == mem;
}
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index ee98cd5..06ba90c 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2514,6 +2514,8 @@
#define PCI_DEVICE_ID_INTEL_IOAT_TBG3 0x3433
#define PCI_DEVICE_ID_INTEL_82830_HB 0x3575
#define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577
+#define PCI_DEVICE_ID_INTEL_82854_HB 0x358c
+#define PCI_DEVICE_ID_INTEL_82854_IG 0x358e
#define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580
#define PCI_DEVICE_ID_INTEL_82855GM_IG 0x3582
#define PCI_DEVICE_ID_INTEL_E7520_MCH 0x3590
diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h
new file mode 100644
index 0000000..8f921d7
--- /dev/null
+++ b/include/linux/percpu-defs.h
@@ -0,0 +1,84 @@
+#ifndef _LINUX_PERCPU_DEFS_H
+#define _LINUX_PERCPU_DEFS_H
+
+/*
+ * Determine the real variable name from the name visible in the
+ * kernel sources.
+ */
+#define per_cpu_var(var) per_cpu__##var
+
+/*
+ * Base implementations of per-CPU variable declarations and definitions, where
+ * the section in which the variable is to be placed is provided by the
+ * 'section' argument. This may be used to affect the parameters governing the
+ * variable's storage.
+ *
+ * NOTE! The sections for the DECLARE and for the DEFINE must match, lest
+ * linkage errors occur due the compiler generating the wrong code to access
+ * that section.
+ */
+#define DECLARE_PER_CPU_SECTION(type, name, section) \
+ extern \
+ __attribute__((__section__(PER_CPU_BASE_SECTION section))) \
+ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
+#define DEFINE_PER_CPU_SECTION(type, name, section) \
+ __attribute__((__section__(PER_CPU_BASE_SECTION section))) \
+ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
+/*
+ * Variant on the per-CPU variable declaration/definition theme used for
+ * ordinary per-CPU variables.
+ */
+#define DECLARE_PER_CPU(type, name) \
+ DECLARE_PER_CPU_SECTION(type, name, "")
+
+#define DEFINE_PER_CPU(type, name) \
+ DEFINE_PER_CPU_SECTION(type, name, "")
+
+/*
+ * Declaration/definition used for per-CPU variables that must come first in
+ * the set of variables.
+ */
+#define DECLARE_PER_CPU_FIRST(type, name) \
+ DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
+
+#define DEFINE_PER_CPU_FIRST(type, name) \
+ DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
+
+/*
+ * Declaration/definition used for per-CPU variables that must be cacheline
+ * aligned under SMP conditions so that, whilst a particular instance of the
+ * data corresponds to a particular CPU, inefficiencies due to direct access by
+ * other CPUs are reduced by preventing the data from unnecessarily spanning
+ * cachelines.
+ *
+ * An example of this would be statistical data, where each CPU's set of data
+ * is updated by that CPU alone, but the data from across all CPUs is collated
+ * by a CPU processing a read from a proc file.
+ */
+#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name) \
+ DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
+ ____cacheline_aligned_in_smp
+
+#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
+ DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
+ ____cacheline_aligned_in_smp
+
+/*
+ * Declaration/definition used for per-CPU variables that must be page aligned.
+ */
+#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name) \
+ DECLARE_PER_CPU_SECTION(type, name, ".page_aligned")
+
+#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \
+ DEFINE_PER_CPU_SECTION(type, name, ".page_aligned")
+
+/*
+ * Intermodule exports for per-CPU variables.
+ */
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+
+
+#endif /* _LINUX_PERCPU_DEFS_H */
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
index cfda2d5..1581ff2 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -9,50 +9,6 @@
#include <asm/percpu.h>
-#ifndef PER_CPU_BASE_SECTION
-#ifdef CONFIG_SMP
-#define PER_CPU_BASE_SECTION ".data.percpu"
-#else
-#define PER_CPU_BASE_SECTION ".data"
-#endif
-#endif
-
-#ifdef CONFIG_SMP
-
-#ifdef MODULE
-#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#else
-#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
-#endif
-#define PER_CPU_FIRST_SECTION ".first"
-
-#else
-
-#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#define PER_CPU_FIRST_SECTION ""
-
-#endif
-
-#define DEFINE_PER_CPU_SECTION(type, name, section) \
- __attribute__((__section__(PER_CPU_BASE_SECTION section))) \
- PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU(type, name) \
- DEFINE_PER_CPU_SECTION(type, name, "")
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
- ____cacheline_aligned_in_smp
-
-#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \
- DEFINE_PER_CPU_SECTION(type, name, ".page_aligned")
-
-#define DEFINE_PER_CPU_FIRST(type, name) \
- DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
-
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
/* enough to cover all DEFINE_PER_CPUs in modules */
#ifdef CONFIG_MODULES
#define PERCPU_MODULE_RESERVE (8 << 10)
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index 8e41202..c8f0385 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -134,6 +134,11 @@
memory allocation, whereas PIPE_BUF makes atomicity guarantees. */
#define PIPE_SIZE PAGE_SIZE
+/* Pipe lock and unlock operations */
+void pipe_lock(struct pipe_inode_info *);
+void pipe_unlock(struct pipe_inode_info *);
+void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *);
+
/* Drop the inode semaphore and wait for a pipe event, atomically */
void pipe_wait(struct pipe_inode_info *pipe);
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 76e470a..72736fd 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -77,4 +77,46 @@
#define platform_get_drvdata(_dev) dev_get_drvdata(&(_dev)->dev)
#define platform_set_drvdata(_dev,data) dev_set_drvdata(&(_dev)->dev, (data))
+/* early platform driver interface */
+struct early_platform_driver {
+ const char *class_str;
+ struct platform_driver *pdrv;
+ struct list_head list;
+ int requested_id;
+};
+
+#define EARLY_PLATFORM_ID_UNSET -2
+#define EARLY_PLATFORM_ID_ERROR -3
+
+extern int early_platform_driver_register(struct early_platform_driver *epdrv,
+ char *buf);
+extern void early_platform_add_devices(struct platform_device **devs, int num);
+
+static inline int is_early_platform_device(struct platform_device *pdev)
+{
+ return !pdev->dev.driver;
+}
+
+extern void early_platform_driver_register_all(char *class_str);
+extern int early_platform_driver_probe(char *class_str,
+ int nr_probe, int user_only);
+extern void early_platform_cleanup(void);
+
+
+#ifndef MODULE
+#define early_platform_init(class_string, platform_driver) \
+static __initdata struct early_platform_driver early_driver = { \
+ .class_str = class_string, \
+ .pdrv = platform_driver, \
+ .requested_id = EARLY_PLATFORM_ID_UNSET, \
+}; \
+static int __init early_platform_driver_setup_func(char *buf) \
+{ \
+ return early_platform_driver_register(&early_driver, buf); \
+} \
+early_param(class_string, early_platform_driver_setup_func)
+#else /* MODULE */
+#define early_platform_init(class_string, platform_driver)
+#endif /* MODULE */
+
#endif /* _PLATFORM_DEVICE_H_ */
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 0cdda00..58b2aa5 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -161,9 +161,8 @@
unsigned long offline_fqs; /* Kicked due to being offline. */
unsigned long resched_ipi; /* Sent a resched IPI. */
- /* 5) state to allow this CPU to force_quiescent_state on others */
+ /* 5) For future __rcu_pending statistics. */
long n_rcu_pending; /* rcu_pending() calls since boot. */
- long n_rcu_pending_force_qs; /* when to force quiescent states. */
int cpu;
};
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 5621d87..6b361d2 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -193,7 +193,7 @@
atomic_t j_wcount; /* count of writers for current commit */
unsigned long j_bcount; /* batch count. allows turning X transactions into 1 */
unsigned long j_first_unflushed_offset; /* first unflushed transactions offset */
- unsigned long j_last_flush_trans_id; /* last fully flushed journal timestamp */
+ unsigned j_last_flush_trans_id; /* last fully flushed journal timestamp */
struct buffer_head *j_header_bh;
time_t j_trans_start_time; /* time this transaction started */
diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
index 262a8dc..167c333 100644
--- a/include/linux/seccomp.h
+++ b/include/linux/seccomp.h
@@ -21,6 +21,8 @@
#else /* CONFIG_SECCOMP */
+#include <linux/errno.h>
+
typedef struct { } seccomp_t;
#define secure_computing(x) do { } while (0)
diff --git a/include/linux/sht15.h b/include/linux/sht15.h
new file mode 100644
index 0000000..046bce0
--- /dev/null
+++ b/include/linux/sht15.h
@@ -0,0 +1,24 @@
+/*
+ * sht15.h - support for the SHT15 Temperature and Humidity Sensor
+ *
+ * Copyright (c) 2009 Jonathan Cameron
+ *
+ * Copyright (c) 2007 Wouter Horre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/**
+ * struct sht15_platform_data - sht15 connectivity info
+ * @gpio_data: no. of gpio to which bidirectional data line is connected
+ * @gpio_sck: no. of gpio to which the data clock is connected.
+ * @supply_mv: supply voltage in mv. Overridden by regulator if available.
+ **/
+struct sht15_platform_data {
+ int gpio_data;
+ int gpio_sck;
+ int supply_mv;
+};
+
diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h
index 8595827..b65c888 100644
--- a/include/linux/slow-work.h
+++ b/include/linux/slow-work.h
@@ -67,7 +67,7 @@
}
/**
- * slow_work_init - Initialise a very slow work item
+ * vslow_work_init - Initialise a very slow work item
* @work: The work item to initialise
* @ops: The operations to use to handle the slow work item
*
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index 05eab2f..2ea2032 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -51,5 +51,6 @@
void **filter_data);
int (*filter) (void *filter_data, int data_idx, int *val);
void (*filter_cleanup)(void *filter_data);
+ void (*wait_for_sync)(void);
};
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 2cc43fa..a0faa18 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -245,7 +245,12 @@
*/
u16 dma_alignment;
- /* setup mode and clock, etc (spi driver may call many times) */
+ /* Setup mode and clock, etc (spi driver may call many times).
+ *
+ * IMPORTANT: this may be called when transfers to another
+ * device are active. DO NOT UPDATE SHARED REGISTERS in ways
+ * which could break those transfers.
+ */
int (*setup)(struct spi_device *spi);
/* bidirectional bulk transfers
diff --git a/include/linux/splice.h b/include/linux/splice.h
index 528dcb9..5f3faa9 100644
--- a/include/linux/splice.h
+++ b/include/linux/splice.h
@@ -36,6 +36,8 @@
void *data; /* cookie */
} u;
loff_t pos; /* file position */
+ size_t num_spliced; /* number of bytes already spliced */
+ bool need_wakeup; /* need to wake up writer */
};
struct partial_page {
@@ -66,6 +68,16 @@
splice_actor *);
extern ssize_t __splice_from_pipe(struct pipe_inode_info *,
struct splice_desc *, splice_actor *);
+extern int splice_from_pipe_feed(struct pipe_inode_info *, struct splice_desc *,
+ splice_actor *);
+extern int splice_from_pipe_next(struct pipe_inode_info *,
+ struct splice_desc *);
+extern void splice_from_pipe_begin(struct splice_desc *);
+extern void splice_from_pipe_end(struct pipe_inode_info *,
+ struct splice_desc *);
+extern int pipe_to_file(struct pipe_inode_info *, struct pipe_buffer *,
+ struct splice_desc *);
+
extern ssize_t splice_to_pipe(struct pipe_inode_info *,
struct splice_pipe_desc *);
extern ssize_t splice_direct_to_actor(struct file *, struct splice_desc *,
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 3e3a436..795032e 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -58,10 +58,17 @@
* by @begin().
* @prepare() is called right after devices have been suspended (ie. the
* appropriate .suspend() method has been executed for each device) and
- * before the nonboot CPUs are disabled (it is executed with IRQs enabled).
- * This callback is optional. It returns 0 on success or a negative
- * error code otherwise, in which case the system cannot enter the desired
- * sleep state (@enter() and @finish() will not be called in that case).
+ * before device drivers' late suspend callbacks are executed. It returns
+ * 0 on success or a negative error code otherwise, in which case the
+ * system cannot enter the desired sleep state (@prepare_late(), @enter(),
+ * @wake(), and @finish() will not be called in that case).
+ *
+ * @prepare_late: Finish preparing the platform for entering the system sleep
+ * state indicated by @begin().
+ * @prepare_late is called before disabling nonboot CPUs and after
+ * device drivers' late suspend callbacks have been executed. It returns
+ * 0 on success or a negative error code otherwise, in which case the
+ * system cannot enter the desired sleep state (@enter() and @wake()).
*
* @enter: Enter the system sleep state indicated by @begin() or represented by
* the argument if @begin() is not implemented.
@@ -69,19 +76,26 @@
* error code otherwise, in which case the system cannot enter the desired
* sleep state.
*
- * @finish: Called when the system has just left a sleep state, right after
- * the nonboot CPUs have been enabled and before devices are resumed (it is
- * executed with IRQs enabled).
+ * @wake: Called when the system has just left a sleep state, right after
+ * the nonboot CPUs have been enabled and before device drivers' early
+ * resume callbacks are executed.
+ * This callback is optional, but should be implemented by the platforms
+ * that implement @prepare_late(). If implemented, it is always called
+ * after @enter(), even if @enter() fails.
+ *
+ * @finish: Finish wake-up of the platform.
+ * @finish is called right prior to calling device drivers' regular suspend
+ * callbacks.
* This callback is optional, but should be implemented by the platforms
* that implement @prepare(). If implemented, it is always called after
- * @enter() (even if @enter() fails).
+ * @enter() and @wake(), if implemented, even if any of them fails.
*
* @end: Called by the PM core right after resuming devices, to indicate to
* the platform that the system has returned to the working state or
* the transition to the sleep state has been aborted.
* This callback is optional, but should be implemented by the platforms
- * that implement @begin(), but platforms implementing @begin() should
- * also provide a @end() which cleans up transitions aborted before
+ * that implement @begin(). Accordingly, platforms implementing @begin()
+ * should also provide a @end() which cleans up transitions aborted before
* @enter().
*
* @recover: Recover the platform from a suspend failure.
@@ -93,7 +107,9 @@
int (*valid)(suspend_state_t state);
int (*begin)(suspend_state_t state);
int (*prepare)(void);
+ int (*prepare_late)(void);
int (*enter)(suspend_state_t state);
+ void (*wake)(void);
void (*finish)(void);
void (*end)(void);
void (*recover)(void);
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index dabe4ad..40617c1 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -148,7 +148,7 @@
asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n" \
"\t.globl ." #alias "\n\t.set ." #alias ", ." #name)
#else
-#ifdef CONFIG_ALPHA
+#if defined(CONFIG_ALPHA) || defined(CONFIG_MIPS)
#define SYSCALL_ALIAS(alias, name) \
asm ( #alias " = " #name "\n\t.globl " #alias)
#else
diff --git a/include/linux/usb.h b/include/linux/usb.h
index c6b2ab4..3aa2cd1 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1387,6 +1387,7 @@
extern int usb_clear_halt(struct usb_device *dev, int pipe);
extern int usb_reset_configuration(struct usb_device *dev);
extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
+extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr);
/* this request isn't really synchronous, but it belongs with the others */
extern int usb_driver_set_configuration(struct usb_device *udev, int config);
@@ -1491,14 +1492,6 @@
#define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL)
#define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK)
-/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
-#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
-#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
-#define usb_settoggle(dev, ep, out, bit) \
- ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
- ((bit) << (ep)))
-
-
static inline unsigned int __create_pipe(struct usb_device *dev,
unsigned int endpoint)
{
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index b958425..625e9e4 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -29,7 +29,7 @@
/**
* usb_serial_port: structure for the specific ports of a device.
* @serial: pointer back to the struct usb_serial owner of this port.
- * @tty: pointer to the corresponding tty for this port.
+ * @port: pointer to the corresponding tty_port for this port.
* @lock: spinlock to grab when updating portions of this structure.
* @mutex: mutex used to synchronize serial_open() and serial_close()
* access for this port.
@@ -44,19 +44,22 @@
* @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
* for this port.
* @bulk_in_buffer: pointer to the bulk in buffer for this port.
+ * @bulk_in_size: the size of the bulk_in_buffer, in bytes.
* @read_urb: pointer to the bulk in struct urb for this port.
* @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
* port.
* @bulk_out_buffer: pointer to the bulk out buffer for this port.
* @bulk_out_size: the size of the bulk_out_buffer, in bytes.
* @write_urb: pointer to the bulk out struct urb for this port.
+ * @write_urb_busy: port`s writing status
* @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
* port.
* @write_wait: a wait_queue_head_t used by the port.
* @work: work queue entry for the line discipline waking up.
- * @open_count: number of times this port has been opened.
* @throttled: nonzero if the read urb is inactive to throttle the device
* @throttle_req: nonzero if the tty wants to throttle us
+ * @console: attached usb serial console
+ * @dev: pointer to the serial device
*
* This structure is used by the usb-serial core and drivers for the specific
* ports of a device.
diff --git a/include/sound/jack.h b/include/sound/jack.h
index 6b013c6..f236e42 100644
--- a/include/sound/jack.h
+++ b/include/sound/jack.h
@@ -50,6 +50,8 @@
int type;
const char *id;
char name[100];
+ void *private_data;
+ void (*private_free)(struct snd_jack *);
};
#ifdef CONFIG_SND_JACK
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index 8904b19..c172968 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -268,7 +268,8 @@
int overrange;
snd_pcm_uframes_t avail_max;
snd_pcm_uframes_t hw_ptr_base; /* Position at buffer restart */
- snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time*/
+ snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time */
+ unsigned long hw_ptr_jiffies; /* Time when hw_ptr is updated */
/* -- HW params -- */
snd_pcm_access_t access; /* access mode */
diff --git a/include/video/cyblafb.h b/include/video/cyblafb.h
deleted file mode 100644
index d3c1d4e..0000000
--- a/include/video/cyblafb.h
+++ /dev/null
@@ -1,175 +0,0 @@
-
-#ifndef CYBLAFB_DEBUG
-#define CYBLAFB_DEBUG 0
-#endif
-
-#if CYBLAFB_DEBUG
-#define debug(f,a...) printk("%s:" f, __func__ , ## a);
-#else
-#define debug(f,a...)
-#endif
-
-#define output(f, a...) printk("cyblafb: " f, ## a)
-
-#define Kb (1024)
-#define Mb (Kb*Kb)
-
-/* PCI IDS of supported cards temporarily here */
-
-#define CYBERBLADEi1 0x8500
-
-/* these defines are for 'lcd' variable */
-#define LCD_STRETCH 0
-#define LCD_CENTER 1
-#define LCD_BIOS 2
-
-/* display types */
-#define DISPLAY_CRT 0
-#define DISPLAY_FP 1
-
-#define ROP_S 0xCC
-
-#define point(x,y) ((y)<<16|(x))
-
-//
-// Attribute Regs, ARxx, 3c0/3c1
-//
-#define AR00 0x00
-#define AR01 0x01
-#define AR02 0x02
-#define AR03 0x03
-#define AR04 0x04
-#define AR05 0x05
-#define AR06 0x06
-#define AR07 0x07
-#define AR08 0x08
-#define AR09 0x09
-#define AR0A 0x0A
-#define AR0B 0x0B
-#define AR0C 0x0C
-#define AR0D 0x0D
-#define AR0E 0x0E
-#define AR0F 0x0F
-#define AR10 0x10
-#define AR12 0x12
-#define AR13 0x13
-
-//
-// Sequencer Regs, SRxx, 3c4/3c5
-//
-#define SR00 0x00
-#define SR01 0x01
-#define SR02 0x02
-#define SR03 0x03
-#define SR04 0x04
-#define SR0D 0x0D
-#define SR0E 0x0E
-#define SR11 0x11
-#define SR18 0x18
-#define SR19 0x19
-
-//
-//
-//
-#define CR00 0x00
-#define CR01 0x01
-#define CR02 0x02
-#define CR03 0x03
-#define CR04 0x04
-#define CR05 0x05
-#define CR06 0x06
-#define CR07 0x07
-#define CR08 0x08
-#define CR09 0x09
-#define CR0A 0x0A
-#define CR0B 0x0B
-#define CR0C 0x0C
-#define CR0D 0x0D
-#define CR0E 0x0E
-#define CR0F 0x0F
-#define CR10 0x10
-#define CR11 0x11
-#define CR12 0x12
-#define CR13 0x13
-#define CR14 0x14
-#define CR15 0x15
-#define CR16 0x16
-#define CR17 0x17
-#define CR18 0x18
-#define CR19 0x19
-#define CR1A 0x1A
-#define CR1B 0x1B
-#define CR1C 0x1C
-#define CR1D 0x1D
-#define CR1E 0x1E
-#define CR1F 0x1F
-#define CR20 0x20
-#define CR21 0x21
-#define CR27 0x27
-#define CR29 0x29
-#define CR2A 0x2A
-#define CR2B 0x2B
-#define CR2D 0x2D
-#define CR2F 0x2F
-#define CR36 0x36
-#define CR38 0x38
-#define CR39 0x39
-#define CR3A 0x3A
-#define CR55 0x55
-#define CR56 0x56
-#define CR57 0x57
-#define CR58 0x58
-
-//
-//
-//
-
-#define GR00 0x01
-#define GR01 0x01
-#define GR02 0x02
-#define GR03 0x03
-#define GR04 0x04
-#define GR05 0x05
-#define GR06 0x06
-#define GR07 0x07
-#define GR08 0x08
-#define GR0F 0x0F
-#define GR20 0x20
-#define GR23 0x23
-#define GR2F 0x2F
-#define GR30 0x30
-#define GR31 0x31
-#define GR33 0x33
-#define GR52 0x52
-#define GR53 0x53
-#define GR5D 0x5d
-
-
-//
-// Graphics Engine
-//
-#define GEBase 0x2100 // could be mapped elsewhere if we like it
-#define GE00 (GEBase+0x00) // source 1, p 111
-#define GE04 (GEBase+0x04) // source 2, p 111
-#define GE08 (GEBase+0x08) // destination 1, p 111
-#define GE0C (GEBase+0x0C) // destination 2, p 112
-#define GE10 (GEBase+0x10) // right view base & enable, p 112
-#define GE13 (GEBase+0x13) // left view base & enable, p 112
-#define GE18 (GEBase+0x18) // block write start address, p 112
-#define GE1C (GEBase+0x1C) // block write end address, p 112
-#define GE20 (GEBase+0x20) // engine status, p 113
-#define GE24 (GEBase+0x24) // reset all GE pointers
-#define GE44 (GEBase+0x44) // command register, p 126
-#define GE48 (GEBase+0x48) // raster operation, p 127
-#define GE60 (GEBase+0x60) // foreground color, p 128
-#define GE64 (GEBase+0x64) // background color, p 128
-#define GE6C (GEBase+0x6C) // Pattern and Style, p 129, ok
-#define GE9C (GEBase+0x9C) // pixel engine data port, p 125
-#define GEB8 (GEBase+0xB8) // Destination Stride / Buffer Base 0, p 133
-#define GEBC (GEBase+0xBC) // Destination Stride / Buffer Base 1, p 133
-#define GEC0 (GEBase+0xC0) // Destination Stride / Buffer Base 2, p 133
-#define GEC4 (GEBase+0xC4) // Destination Stride / Buffer Base 3, p 133
-#define GEC8 (GEBase+0xC8) // Source Stride / Buffer Base 0, p 133
-#define GECC (GEBase+0xCC) // Source Stride / Buffer Base 1, p 133
-#define GED0 (GEBase+0xD0) // Source Stride / Buffer Base 2, p 133
-#define GED4 (GEBase+0xD4) // Source Stride / Buffer Base 3, p 133
diff --git a/init/initramfs.c b/init/initramfs.c
index 80cd713..9ee7b78 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -310,7 +310,8 @@
if (wfd >= 0) {
sys_fchown(wfd, uid, gid);
sys_fchmod(wfd, mode);
- sys_ftruncate(wfd, body_len);
+ if (body_len)
+ sys_ftruncate(wfd, body_len);
vcollected = kstrdup(collected, GFP_KERNEL);
state = CopyFile;
}
@@ -515,6 +516,7 @@
initrd_end = 0;
}
+#ifdef CONFIG_BLK_DEV_RAM
#define BUF_SIZE 1024
static void __init clean_rootfs(void)
{
@@ -561,6 +563,7 @@
sys_close(fd);
kfree(buf);
}
+#endif
static int __init populate_rootfs(void)
{
diff --git a/init/main.c b/init/main.c
index 3585f07..3bbf93b 100644
--- a/init/main.c
+++ b/init/main.c
@@ -492,6 +492,11 @@
return 0;
}
+void __init parse_early_options(char *cmdline)
+{
+ parse_args("early options", cmdline, NULL, 0, do_early_param);
+}
+
/* Arch code calls this early on, or if not, just before other parsing. */
void __init parse_early_param(void)
{
@@ -503,7 +508,7 @@
/* All fall through to do_early_param. */
strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE);
- parse_args("early options", tmp_cmdline, NULL, 0, do_early_param);
+ parse_early_options(tmp_cmdline);
done = 1;
}
diff --git a/ipc/mq_sysctl.c b/ipc/mq_sysctl.c
index 89f60ec..24ae46d 100644
--- a/ipc/mq_sysctl.c
+++ b/ipc/mq_sysctl.c
@@ -22,6 +22,7 @@
#define MIN_MSGSIZEMAX 128 /* min value for msgsize_max */
#define MAX_MSGSIZEMAX (8192*128) /* max value for msgsize_max */
+#ifdef CONFIG_PROC_SYSCTL
static void *get_mq(ctl_table *table)
{
char *which = table->data;
@@ -30,7 +31,6 @@
return which;
}
-#ifdef CONFIG_PROC_SYSCTL
static int proc_mq_dointvec(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 917ab95..6e73517 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -734,9 +734,6 @@
dentry = dget(path.dentry);
path_put(&path);
- if (dentry == tagged->mnt_root && dentry == mnt->mnt_root)
- follow_up(&mnt, &dentry);
-
list_add_tail(&list, &tagged->mnt_list);
mutex_lock(&audit_filter_mutex);
diff --git a/kernel/power/main.c b/kernel/power/main.c
index f172f41..f99ed6a 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -291,20 +291,26 @@
device_pm_lock();
+ if (suspend_ops->prepare) {
+ error = suspend_ops->prepare();
+ if (error)
+ goto Done;
+ }
+
error = device_power_down(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
- goto Done;
+ goto Platfrom_finish;
}
- if (suspend_ops->prepare) {
- error = suspend_ops->prepare();
+ if (suspend_ops->prepare_late) {
+ error = suspend_ops->prepare_late();
if (error)
goto Power_up_devices;
}
if (suspend_test(TEST_PLATFORM))
- goto Platfrom_finish;
+ goto Platform_wake;
error = disable_nonboot_cpus();
if (error || suspend_test(TEST_CPUS))
@@ -326,13 +332,17 @@
Enable_cpus:
enable_nonboot_cpus();
- Platfrom_finish:
- if (suspend_ops->finish)
- suspend_ops->finish();
+ Platform_wake:
+ if (suspend_ops->wake)
+ suspend_ops->wake();
Power_up_devices:
device_power_up(PMSG_RESUME);
+ Platfrom_finish:
+ if (suspend_ops->finish)
+ suspend_ops->finish();
+
Done:
device_pm_unlock();
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index 505f319..8ba052c 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -64,8 +64,6 @@
struct bio *bio;
bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1);
- if (!bio)
- return -ENOMEM;
bio->bi_sector = page_off * (PAGE_SIZE >> 9);
bio->bi_bdev = resume_bdev;
bio->bi_end_io = end_swap_bio_read;
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 64191fa..dfcd83c 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -604,10 +604,11 @@
ret = security_ptrace_traceme(current->parent);
/*
- * Set the ptrace bit in the process ptrace flags.
- * Then link us on our parent's ptraced list.
+ * Check PF_EXITING to ensure ->real_parent has not passed
+ * exit_ptrace(). Otherwise we don't report the error but
+ * pretend ->real_parent untraces us right after return.
*/
- if (!ret) {
+ if (!ret && !(current->real_parent->flags & PF_EXITING)) {
current->ptrace |= PT_PTRACED;
__ptrace_link(current, current->real_parent);
}
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index 2c7b845..a967c9f 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -58,6 +58,10 @@
static struct completion rcu_barrier_completion;
int rcu_scheduler_active __read_mostly;
+static atomic_t rcu_migrate_type_count = ATOMIC_INIT(0);
+static struct rcu_head rcu_migrate_head[3];
+static DECLARE_WAIT_QUEUE_HEAD(rcu_migrate_wq);
+
/*
* Awaken the corresponding synchronize_rcu() instance now that a
* grace period has elapsed.
@@ -122,7 +126,10 @@
}
}
-static inline void wait_migrated_callbacks(void);
+static inline void wait_migrated_callbacks(void)
+{
+ wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
+}
/*
* Orchestrate the specified type of RCU barrier, waiting for all
@@ -179,21 +186,12 @@
}
EXPORT_SYMBOL_GPL(rcu_barrier_sched);
-static atomic_t rcu_migrate_type_count = ATOMIC_INIT(0);
-static struct rcu_head rcu_migrate_head[3];
-static DECLARE_WAIT_QUEUE_HEAD(rcu_migrate_wq);
-
static void rcu_migrate_callback(struct rcu_head *notused)
{
if (atomic_dec_and_test(&rcu_migrate_type_count))
wake_up(&rcu_migrate_wq);
}
-static inline void wait_migrated_callbacks(void)
-{
- wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
-}
-
static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
unsigned long action, void *hcpu)
{
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 7f32669..d2a372f 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -530,8 +530,6 @@
rdp->qs_pending = 1;
rdp->passed_quiesc = 0;
rdp->gpnum = rsp->gpnum;
- rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
- RCU_JIFFIES_TILL_FORCE_QS;
}
/*
@@ -578,8 +576,6 @@
rsp->gpnum++;
rsp->signaled = RCU_GP_INIT; /* Hold off force_quiescent_state. */
rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS;
- rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
- RCU_JIFFIES_TILL_FORCE_QS;
record_gp_stall_check_time(rsp);
dyntick_record_completed(rsp, rsp->completed - 1);
note_new_gpnum(rsp, rdp);
@@ -1055,7 +1051,6 @@
{
unsigned long flags;
long lastcomp;
- struct rcu_data *rdp = rsp->rda[smp_processor_id()];
struct rcu_node *rnp = rcu_get_root(rsp);
u8 signaled;
@@ -1066,16 +1061,13 @@
return; /* Someone else is already on the job. */
}
if (relaxed &&
- (long)(rsp->jiffies_force_qs - jiffies) >= 0 &&
- (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) >= 0)
+ (long)(rsp->jiffies_force_qs - jiffies) >= 0)
goto unlock_ret; /* no emergency and done recently. */
rsp->n_force_qs++;
spin_lock(&rnp->lock);
lastcomp = rsp->completed;
signaled = rsp->signaled;
rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS;
- rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
- RCU_JIFFIES_TILL_FORCE_QS;
if (lastcomp == rsp->gpnum) {
rsp->n_force_qs_ngp++;
spin_unlock(&rnp->lock);
@@ -1144,8 +1136,7 @@
* If an RCU GP has gone long enough, go check for dyntick
* idle CPUs and, if needed, send resched IPIs.
*/
- if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
- (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0)
+ if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)
force_quiescent_state(rsp, 1);
/*
@@ -1230,8 +1221,7 @@
if (unlikely(++rdp->qlen > qhimark)) {
rdp->blimit = LONG_MAX;
force_quiescent_state(rsp, 0);
- } else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
- (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0)
+ } else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)
force_quiescent_state(rsp, 1);
local_irq_restore(flags);
}
@@ -1290,8 +1280,7 @@
/* Has an RCU GP gone long enough to send resched IPIs &c? */
if (ACCESS_ONCE(rsp->completed) != ACCESS_ONCE(rsp->gpnum) &&
- ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
- (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0))
+ ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0))
return 1;
/* nothing to do */
diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c
index 4ee954f..4b1875b 100644
--- a/kernel/rcutree_trace.c
+++ b/kernel/rcutree_trace.c
@@ -49,14 +49,12 @@
{
if (!rdp->beenonline)
return;
- seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d rpfq=%ld rp=%x",
+ seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d",
rdp->cpu,
cpu_is_offline(rdp->cpu) ? '!' : ' ',
rdp->completed, rdp->gpnum,
rdp->passed_quiesc, rdp->passed_quiesc_completed,
- rdp->qs_pending,
- rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending,
- (int)(rdp->n_rcu_pending & 0xffff));
+ rdp->qs_pending);
#ifdef CONFIG_NO_HZ
seq_printf(m, " dt=%d/%d dn=%d df=%lu",
rdp->dynticks->dynticks,
@@ -102,14 +100,12 @@
{
if (!rdp->beenonline)
return;
- seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d,%ld,%ld",
+ seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d",
rdp->cpu,
cpu_is_offline(rdp->cpu) ? "\"Y\"" : "\"N\"",
rdp->completed, rdp->gpnum,
rdp->passed_quiesc, rdp->passed_quiesc_completed,
- rdp->qs_pending,
- rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending,
- rdp->n_rcu_pending);
+ rdp->qs_pending);
#ifdef CONFIG_NO_HZ
seq_printf(m, ",%d,%d,%d,%lu",
rdp->dynticks->dynticks,
@@ -123,7 +119,7 @@
static int show_rcudata_csv(struct seq_file *m, void *unused)
{
- seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\",\"rpfq\",\"rp\",");
+ seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\",");
#ifdef CONFIG_NO_HZ
seq_puts(m, "\"dt\",\"dt nesting\",\"dn\",\"df\",");
#endif /* #ifdef CONFIG_NO_HZ */
diff --git a/kernel/resource.c b/kernel/resource.c
index fd5d7d5..ac5f3a3 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -533,43 +533,21 @@
res->end = end;
res->flags = IORESOURCE_BUSY;
- for (;;) {
- conflict = __request_resource(parent, res);
- if (!conflict)
- break;
- if (conflict != parent) {
- parent = conflict;
- if (!(conflict->flags & IORESOURCE_BUSY))
- continue;
- }
+ conflict = __request_resource(parent, res);
+ if (!conflict)
+ return;
- /* Uhhuh, that didn't work out.. */
- kfree(res);
- res = NULL;
- break;
- }
+ /* failed, split and try again */
+ kfree(res);
- if (!res) {
- /* failed, split and try again */
+ /* conflict covered whole area */
+ if (conflict->start <= start && conflict->end >= end)
+ return;
- /* conflict covered whole area */
- if (conflict->start <= start && conflict->end >= end)
- return;
-
- if (conflict->start > start)
- __reserve_region_with_split(root, start, conflict->start-1, name);
- if (!(conflict->flags & IORESOURCE_BUSY)) {
- resource_size_t common_start, common_end;
-
- common_start = max(conflict->start, start);
- common_end = min(conflict->end, end);
- if (common_start < common_end)
- __reserve_region_with_split(root, common_start, common_end, name);
- }
- if (conflict->end < end)
- __reserve_region_with_split(root, conflict->end+1, end, name);
- }
-
+ if (conflict->start > start)
+ __reserve_region_with_split(root, start, conflict->start-1, name);
+ if (conflict->end < end)
+ __reserve_region_with_split(root, conflict->end+1, end, name);
}
void __init reserve_region_with_split(struct resource *root,
diff --git a/kernel/sched.c b/kernel/sched.c
index 5724508..b902e58 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4846,7 +4846,7 @@
#endif
}
-unsigned long get_parent_ip(unsigned long addr)
+notrace unsigned long get_parent_ip(unsigned long addr)
{
if (in_lock_functions(addr)) {
addr = CALLER_ADDR2;
@@ -7367,8 +7367,12 @@
cpumask_or(groupmask, groupmask, sched_group_cpus(group));
cpulist_scnprintf(str, sizeof(str), sched_group_cpus(group));
- printk(KERN_CONT " %s (__cpu_power = %d)", str,
- group->__cpu_power);
+
+ printk(KERN_CONT " %s", str);
+ if (group->__cpu_power != SCHED_LOAD_SCALE) {
+ printk(KERN_CONT " (__cpu_power = %d)",
+ group->__cpu_power);
+ }
group = group->next;
} while (group != sd->groups);
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 2fecefa..b525dd3 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -472,9 +472,9 @@
printk("Attempt to kill tasklet from interrupt\n");
while (test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) {
- do
+ do {
yield();
- while (test_bit(TASKLET_STATE_SCHED, &t->state));
+ } while (test_bit(TASKLET_STATE_SCHED, &t->state));
}
tasklet_unlock_wait(t);
clear_bit(TASKLET_STATE_SCHED, &t->state);
diff --git a/kernel/sys.c b/kernel/sys.c
index 51dbb55..e7998cf 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -360,6 +360,7 @@
void __user *, arg)
{
char buffer[256];
+ int ret = 0;
/* We only trust the superuser with rebooting the system. */
if (!capable(CAP_SYS_BOOT))
@@ -397,7 +398,7 @@
kernel_halt();
unlock_kernel();
do_exit(0);
- break;
+ panic("cannot halt");
case LINUX_REBOOT_CMD_POWER_OFF:
kernel_power_off();
@@ -417,29 +418,22 @@
#ifdef CONFIG_KEXEC
case LINUX_REBOOT_CMD_KEXEC:
- {
- int ret;
- ret = kernel_kexec();
- unlock_kernel();
- return ret;
- }
+ ret = kernel_kexec();
+ break;
#endif
#ifdef CONFIG_HIBERNATION
case LINUX_REBOOT_CMD_SW_SUSPEND:
- {
- int ret = hibernate();
- unlock_kernel();
- return ret;
- }
+ ret = hibernate();
+ break;
#endif
default:
- unlock_kernel();
- return -EINVAL;
+ ret = -EINVAL;
+ break;
}
unlock_kernel();
- return 0;
+ return ret;
}
static void deferred_cad(struct work_struct *dummy)
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 4286b62..e3d2c7d 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -902,16 +902,6 @@
.proc_handler = &proc_dointvec,
},
#endif
-#ifdef CONFIG_UNEVICTABLE_LRU
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "scan_unevictable_pages",
- .data = &scan_unevictable_pages,
- .maxlen = sizeof(scan_unevictable_pages),
- .mode = 0644,
- .proc_handler = &scan_unevictable_handler,
- },
-#endif
#ifdef CONFIG_SLOW_WORK
{
.ctl_name = CTL_UNNUMBERED,
@@ -1302,6 +1292,16 @@
.extra2 = &one,
},
#endif
+#ifdef CONFIG_UNEVICTABLE_LRU
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "scan_unevictable_pages",
+ .data = &scan_unevictable_pages,
+ .maxlen = sizeof(scan_unevictable_pages),
+ .mode = 0644,
+ .proc_handler = &scan_unevictable_handler,
+ },
+#endif
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index c46c931..ecfd7b5 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -181,12 +181,12 @@
resumed = test_and_clear_bit(0, &watchdog_resumed);
- wdnow = watchdog->read();
+ wdnow = watchdog->read(watchdog);
wd_nsec = cyc2ns(watchdog, (wdnow - watchdog_last) & watchdog->mask);
watchdog_last = wdnow;
list_for_each_entry_safe(cs, tmp, &watchdog_list, wd_list) {
- csnow = cs->read();
+ csnow = cs->read(cs);
if (unlikely(resumed)) {
cs->wd_last = csnow;
@@ -247,7 +247,7 @@
list_add(&cs->wd_list, &watchdog_list);
if (!started && watchdog) {
- watchdog_last = watchdog->read();
+ watchdog_last = watchdog->read(watchdog);
watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL;
add_timer_on(&watchdog_timer,
cpumask_first(cpu_online_mask));
@@ -268,7 +268,7 @@
cse->flags &= ~CLOCK_SOURCE_WATCHDOG;
/* Start if list is not empty */
if (!list_empty(&watchdog_list)) {
- watchdog_last = watchdog->read();
+ watchdog_last = watchdog->read(watchdog);
watchdog_timer.expires =
jiffies + WATCHDOG_INTERVAL;
add_timer_on(&watchdog_timer,
diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
index 06f1975..c3f6c30 100644
--- a/kernel/time/jiffies.c
+++ b/kernel/time/jiffies.c
@@ -50,7 +50,7 @@
*/
#define JIFFIES_SHIFT 8
-static cycle_t jiffies_read(void)
+static cycle_t jiffies_read(struct clocksource *cs)
{
return (cycle_t) jiffies;
}
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 900f1b6..687dff4 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -182,7 +182,7 @@
*/
static void change_clocksource(void)
{
- struct clocksource *new;
+ struct clocksource *new, *old;
new = clocksource_get_next();
@@ -191,11 +191,16 @@
clocksource_forward_now();
- new->raw_time = clock->raw_time;
+ if (clocksource_enable(new))
+ return;
+ new->raw_time = clock->raw_time;
+ old = clock;
clock = new;
+ clocksource_disable(old);
+
clock->cycle_last = 0;
- clock->cycle_last = clocksource_read(new);
+ clock->cycle_last = clocksource_read(clock);
clock->error = 0;
clock->xtime_nsec = 0;
clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
@@ -292,6 +297,7 @@
ntp_init();
clock = clocksource_get_next();
+ clocksource_enable(clock);
clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
clock->cycle_last = clocksource_read(clock);
diff --git a/kernel/trace/trace_branch.c b/kernel/trace/trace_branch.c
index ad8c22e..8333715 100644
--- a/kernel/trace/trace_branch.c
+++ b/kernel/trace/trace_branch.c
@@ -155,6 +155,13 @@
return TRACE_TYPE_HANDLED;
}
+static void branch_print_header(struct seq_file *s)
+{
+ seq_puts(s, "# TASK-PID CPU# TIMESTAMP CORRECT"
+ " FUNC:FILE:LINE\n");
+ seq_puts(s, "# | | | | | "
+ " |\n");
+}
static struct trace_event trace_branch_event = {
.type = TRACE_BRANCH,
@@ -169,6 +176,7 @@
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_branch,
#endif /* CONFIG_FTRACE_SELFTEST */
+ .print_header = branch_print_header,
};
__init static int init_branch_tracer(void)
diff --git a/kernel/trace/trace_power.c b/kernel/trace/trace_power.c
index bae791e..1184397 100644
--- a/kernel/trace/trace_power.c
+++ b/kernel/trace/trace_power.c
@@ -186,6 +186,12 @@
return TRACE_TYPE_UNHANDLED;
}
+static void power_print_header(struct seq_file *s)
+{
+ seq_puts(s, "# TIMESTAMP STATE EVENT\n");
+ seq_puts(s, "# | | |\n");
+}
+
static struct tracer power_tracer __read_mostly =
{
.name = "power",
@@ -194,6 +200,7 @@
.stop = stop_power_trace,
.reset = power_trace_reset,
.print_line = power_print_line,
+ .print_header = power_print_header,
};
static int init_power_trace(void)
diff --git a/lib/kobject.c b/lib/kobject.c
index a6dec32..bacf6fe 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -218,6 +218,9 @@
const char *old_name = kobj->name;
char *s;
+ if (kobj->name && !fmt)
+ return 0;
+
kobj->name = kvasprintf(GFP_KERNEL, fmt, vargs);
if (!kobj->name)
return -ENOMEM;
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 97a777a..920a3ca 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -258,7 +258,7 @@
goto exit;
retval = call_usermodehelper(argv[0], argv,
- env->envp, UMH_NO_WAIT);
+ env->envp, UMH_WAIT_EXEC);
}
exit:
@@ -328,7 +328,7 @@
"kobject_uevent: unable to create netlink socket!\n");
return -ENODEV;
}
-
+ netlink_set_nonroot(NETLINK_KOBJECT_UEVENT, NL_NONROOT_RECV);
return 0;
}
diff --git a/mm/Kconfig b/mm/Kconfig
index b53427a..57971d2 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -213,6 +213,8 @@
will use one page flag and increase the code size a little,
say Y unless you know what you are doing.
+ See Documentation/vm/unevictable-lru.txt for more information.
+
config HAVE_MLOCK
bool
default y if MMU=y
diff --git a/mm/filemap.c b/mm/filemap.c
index 2e2d38e..379ff0b 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -441,6 +441,7 @@
}
return err;
}
+EXPORT_SYMBOL(filemap_write_and_wait_range);
/**
* add_to_page_cache_locked - add a locked page to the pagecache
@@ -567,8 +568,8 @@
/**
* add_page_wait_queue - Add an arbitrary waiter to a page's wait queue
- * @page - Page defining the wait queue of interest
- * @waiter - Waiter to add to the queue
+ * @page: Page defining the wait queue of interest
+ * @waiter: Waiter to add to the queue
*
* Add an arbitrary @waiter to the wait queue for the nominated @page.
*/
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 2fc6d6c..e44fb0f 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -932,7 +932,7 @@
if (unlikely(!mem))
return 0;
- VM_BUG_ON(mem_cgroup_is_obsolete(mem));
+ VM_BUG_ON(!mem || mem_cgroup_is_obsolete(mem));
while (1) {
int ret;
diff --git a/mm/mmap.c b/mm/mmap.c
index 4a38411..3303d1b 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1575,7 +1575,7 @@
* Overcommit.. This must be the final test, as it will
* update security statistics.
*/
- if (security_vm_enough_memory(grow))
+ if (security_vm_enough_memory_mm(mm, grow))
return -ENOMEM;
/* Ok, everything looks good - let it rip */
diff --git a/mm/shmem.c b/mm/shmem.c
index d94d2e9..f9cb20e 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/vfs.h>
#include <linux/mount.h>
+#include <linux/pagemap.h>
#include <linux/file.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -43,7 +44,6 @@
#include <linux/exportfs.h>
#include <linux/generic_acl.h>
#include <linux/mman.h>
-#include <linux/pagemap.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/backing-dev.h>
@@ -65,13 +65,28 @@
#include <asm/div64.h>
#include <asm/pgtable.h>
+/*
+ * The maximum size of a shmem/tmpfs file is limited by the maximum size of
+ * its triple-indirect swap vector - see illustration at shmem_swp_entry().
+ *
+ * With 4kB page size, maximum file size is just over 2TB on a 32-bit kernel,
+ * but one eighth of that on a 64-bit kernel. With 8kB page size, maximum
+ * file size is just over 4TB on a 64-bit kernel, but 16TB on a 32-bit kernel,
+ * MAX_LFS_FILESIZE being then more restrictive than swap vector layout.
+ *
+ * We use / and * instead of shifts in the definitions below, so that the swap
+ * vector can be tested with small even values (e.g. 20) for ENTRIES_PER_PAGE.
+ */
#define ENTRIES_PER_PAGE (PAGE_CACHE_SIZE/sizeof(unsigned long))
-#define ENTRIES_PER_PAGEPAGE (ENTRIES_PER_PAGE*ENTRIES_PER_PAGE)
+#define ENTRIES_PER_PAGEPAGE ((unsigned long long)ENTRIES_PER_PAGE*ENTRIES_PER_PAGE)
+
+#define SHMSWP_MAX_INDEX (SHMEM_NR_DIRECT + (ENTRIES_PER_PAGEPAGE/2) * (ENTRIES_PER_PAGE+1))
+#define SHMSWP_MAX_BYTES (SHMSWP_MAX_INDEX << PAGE_CACHE_SHIFT)
+
+#define SHMEM_MAX_BYTES min_t(unsigned long long, SHMSWP_MAX_BYTES, MAX_LFS_FILESIZE)
+#define SHMEM_MAX_INDEX ((unsigned long)((SHMEM_MAX_BYTES+1) >> PAGE_CACHE_SHIFT))
+
#define BLOCKS_PER_PAGE (PAGE_CACHE_SIZE/512)
-
-#define SHMEM_MAX_INDEX (SHMEM_NR_DIRECT + (ENTRIES_PER_PAGEPAGE/2) * (ENTRIES_PER_PAGE+1))
-#define SHMEM_MAX_BYTES ((unsigned long long)SHMEM_MAX_INDEX << PAGE_CACHE_SHIFT)
-
#define VM_ACCT(size) (PAGE_CACHE_ALIGN(size) >> PAGE_SHIFT)
/* info->flags needs VM_flags to handle pagein/truncate races efficiently */
@@ -2581,7 +2596,7 @@
#define shmem_get_inode(sb, mode, dev, flags) ramfs_get_inode(sb, mode, dev)
#define shmem_acct_size(flags, size) 0
#define shmem_unacct_size(flags, size) do {} while (0)
-#define SHMEM_MAX_BYTES LLONG_MAX
+#define SHMEM_MAX_BYTES MAX_LFS_FILESIZE
#endif /* CONFIG_SHMEM */
diff --git a/mm/util.c b/mm/util.c
index 2599e83e..55bef16 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -223,6 +223,22 @@
}
#endif
+/**
+ * get_user_pages_fast() - pin user pages in memory
+ * @start: starting user address
+ * @nr_pages: number of pages from start to pin
+ * @write: whether pages will be written to
+ * @pages: array that receives pointers to the pages pinned.
+ * Should be at least nr_pages long.
+ *
+ * Attempt to pin user pages in memory without taking mm->mmap_sem.
+ * If not successful, it will fall back to taking the lock and
+ * calling get_user_pages().
+ *
+ * Returns number of pages pinned. This may be fewer than the number
+ * requested. If nr_pages is 0 or negative, returns 0. If no pages
+ * were pinned, returns -errno.
+ */
int __attribute__((weak)) get_user_pages_fast(unsigned long start,
int nr_pages, int write, struct page **pages)
{
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 39fdfb1..eac9577 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -63,6 +63,9 @@
/* Can mapped pages be reclaimed? */
int may_unmap;
+ /* Can pages be swapped as part of reclaim? */
+ int may_swap;
+
/* This context's SWAP_CLUSTER_MAX. If freeing memory for
* suspend, we effectively ignore SWAP_CLUSTER_MAX.
* In this context, it doesn't matter that we scan the
@@ -1380,7 +1383,7 @@
struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
/* If we have no swap space, do not bother scanning anon pages. */
- if (nr_swap_pages <= 0) {
+ if (!sc->may_swap || (nr_swap_pages <= 0)) {
percent[0] = 0;
percent[1] = 100;
return;
@@ -1697,6 +1700,7 @@
.may_writepage = !laptop_mode,
.swap_cluster_max = SWAP_CLUSTER_MAX,
.may_unmap = 1,
+ .may_swap = 1,
.swappiness = vm_swappiness,
.order = order,
.mem_cgroup = NULL,
@@ -1717,6 +1721,7 @@
struct scan_control sc = {
.may_writepage = !laptop_mode,
.may_unmap = 1,
+ .may_swap = !noswap,
.swap_cluster_max = SWAP_CLUSTER_MAX,
.swappiness = swappiness,
.order = 0,
@@ -1726,9 +1731,6 @@
};
struct zonelist *zonelist;
- if (noswap)
- sc.may_unmap = 0;
-
sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
zonelist = NODE_DATA(numa_node_id())->node_zonelists;
@@ -1767,6 +1769,7 @@
struct scan_control sc = {
.gfp_mask = GFP_KERNEL,
.may_unmap = 1,
+ .may_swap = 1,
.swap_cluster_max = SWAP_CLUSTER_MAX,
.swappiness = vm_swappiness,
.order = order,
@@ -2088,13 +2091,13 @@
nr_reclaimed += shrink_list(l, nr_to_scan, zone,
sc, prio);
if (nr_reclaimed >= nr_pages) {
- sc->nr_reclaimed = nr_reclaimed;
+ sc->nr_reclaimed += nr_reclaimed;
return;
}
}
}
}
- sc->nr_reclaimed = nr_reclaimed;
+ sc->nr_reclaimed += nr_reclaimed;
}
/*
@@ -2115,6 +2118,7 @@
.may_unmap = 0,
.may_writepage = 1,
.isolate_pages = isolate_pages_global,
+ .nr_reclaimed = 0,
};
current->reclaim_state = &reclaim_state;
@@ -2297,6 +2301,7 @@
struct scan_control sc = {
.may_writepage = !!(zone_reclaim_mode & RECLAIM_WRITE),
.may_unmap = !!(zone_reclaim_mode & RECLAIM_SWAP),
+ .may_swap = 1,
.swap_cluster_max = max_t(unsigned long, nr_pages,
SWAP_CLUSTER_MAX),
.gfp_mask = gfp_mask,
diff --git a/net/rds/rds.h b/net/rds/rds.h
index 619f0a3..7179444 100644
--- a/net/rds/rds.h
+++ b/net/rds/rds.h
@@ -638,7 +638,7 @@
void rds_rdma_unuse(struct rds_sock *rs, u32 r_key, int force);
/* stats.c */
-DECLARE_PER_CPU(struct rds_statistics, rds_stats);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct rds_statistics, rds_stats);
#define rds_stats_inc_which(which, member) do { \
per_cpu(which, get_cpu()).member++; \
put_cpu(); \
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 39a9642..5c4b7a4 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -27,6 +27,9 @@
cppflags-y :=
ldflags-y :=
+subdir-asflags-y :=
+subdir-ccflags-y :=
+
# Read auto.conf if it exists, otherwise ignore
-include include/config/auto.conf
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 9796195..cba61ca 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -4,6 +4,11 @@
cppflags-y += $(EXTRA_CPPFLAGS)
ldflags-y += $(EXTRA_LDFLAGS)
+#
+# flags that take effect in sub directories
+export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
+export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)
+
# Figure out what we need to build from the various variables
# ===========================================================================
@@ -104,10 +109,10 @@
debug_flags =
endif
-orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) \
+orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
$(ccflags-y) $(CFLAGS_$(basetarget).o)
_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
-_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) \
+_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
$(asflags-y) $(AFLAGS_$(basetarget).o)
_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 9215149..98b3195 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -609,8 +609,12 @@
strcmp(name, XATTR_NAME_SMACKIPOUT) == 0) {
if (!capable(CAP_MAC_ADMIN))
rc = -EPERM;
- /* a label cannot be void and cannot begin with '-' */
- if (size == 0 || (size > 0 && ((char *)value)[0] == '-'))
+ /*
+ * check label validity here so import wont fail on
+ * post_setxattr
+ */
+ if (size == 0 || size >= SMK_LABELLEN ||
+ smk_import(value, size) == NULL)
rc = -EINVAL;
} else
rc = cap_inode_setxattr(dentry, name, value, size, flags);
@@ -644,9 +648,6 @@
if (strcmp(name, XATTR_NAME_SMACK))
return;
- if (size >= SMK_LABELLEN)
- return;
-
isp = dentry->d_inode->i_security;
/*
diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c
index a0affd9..d4d41b3 100644
--- a/security/tomoyo/common.c
+++ b/security/tomoyo/common.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
@@ -1773,7 +1773,7 @@
envp[2] = NULL;
call_usermodehelper(argv[0], argv, envp, 1);
- printk(KERN_INFO "TOMOYO: 2.2.0-pre 2009/02/01\n");
+ printk(KERN_INFO "TOMOYO: 2.2.0 2009/04/01\n");
printk(KERN_INFO "Mandatory Access Control activated.\n");
tomoyo_policy_loaded = true;
{ /* Check all profiles currently assigned to domains are defined. */
@@ -1800,7 +1800,7 @@
static int tomoyo_read_version(struct tomoyo_io_buffer *head)
{
if (!head->read_eof) {
- tomoyo_io_printf(head, "2.2.0-pre");
+ tomoyo_io_printf(head, "2.2.0");
head->read_eof = true;
}
return 0;
diff --git a/security/tomoyo/common.h b/security/tomoyo/common.h
index e77e6a6..678f4ff 100644
--- a/security/tomoyo/common.h
+++ b/security/tomoyo/common.h
@@ -5,7 +5,7 @@
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
diff --git a/security/tomoyo/domain.c b/security/tomoyo/domain.c
index 2f2b449..2d67487 100644
--- a/security/tomoyo/domain.c
+++ b/security/tomoyo/domain.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
diff --git a/security/tomoyo/file.c b/security/tomoyo/file.c
index 65f50c1..2316da8 100644
--- a/security/tomoyo/file.c
+++ b/security/tomoyo/file.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c
index 3bbe01a..bf8e2b4 100644
--- a/security/tomoyo/realpath.c
+++ b/security/tomoyo/realpath.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
diff --git a/security/tomoyo/realpath.h b/security/tomoyo/realpath.h
index 7ec9fc9c..78217a3 100644
--- a/security/tomoyo/realpath.h
+++ b/security/tomoyo/realpath.h
@@ -5,7 +5,7 @@
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c
index 3eeeae1..5b48191 100644
--- a/security/tomoyo/tomoyo.c
+++ b/security/tomoyo/tomoyo.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
diff --git a/security/tomoyo/tomoyo.h b/security/tomoyo/tomoyo.h
index a0c8f6e..41c6eba 100644
--- a/security/tomoyo/tomoyo.h
+++ b/security/tomoyo/tomoyo.h
@@ -5,7 +5,7 @@
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
diff --git a/sound/core/control.c b/sound/core/control.c
index 4b20fa2..17b8d47 100644
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -723,14 +723,11 @@
{
struct snd_ctl_elem_value *control;
int result;
-
- control = kmalloc(sizeof(*control), GFP_KERNEL);
- if (control == NULL)
- return -ENOMEM;
- if (copy_from_user(control, _control, sizeof(*control))) {
- kfree(control);
- return -EFAULT;
- }
+
+ control = memdup_user(_control, sizeof(*control));
+ if (IS_ERR(control))
+ return PTR_ERR(control);
+
snd_power_lock(card);
result = snd_power_wait(card, SNDRV_CTL_POWER_D0);
if (result >= 0)
@@ -784,13 +781,10 @@
struct snd_card *card;
int result;
- control = kmalloc(sizeof(*control), GFP_KERNEL);
- if (control == NULL)
- return -ENOMEM;
- if (copy_from_user(control, _control, sizeof(*control))) {
- kfree(control);
- return -EFAULT;
- }
+ control = memdup_user(_control, sizeof(*control));
+ if (IS_ERR(control))
+ return PTR_ERR(control);
+
card = file->card;
snd_power_lock(card);
result = snd_power_wait(card, SNDRV_CTL_POWER_D0);
@@ -916,13 +910,10 @@
if (op_flag > 0) {
if (size > 1024 * 128) /* sane value */
return -EINVAL;
- new_data = kmalloc(size, GFP_KERNEL);
- if (new_data == NULL)
- return -ENOMEM;
- if (copy_from_user(new_data, tlv, size)) {
- kfree(new_data);
- return -EFAULT;
- }
+
+ new_data = memdup_user(tlv, size);
+ if (IS_ERR(new_data))
+ return PTR_ERR(new_data);
change = ue->tlv_data_size != size;
if (!change)
change = memcmp(ue->tlv_data, new_data, size);
diff --git a/sound/core/jack.c b/sound/core/jack.c
index c8254c6..d54d1a0 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -35,6 +35,9 @@
{
struct snd_jack *jack = device->device_data;
+ if (jack->private_free)
+ jack->private_free(jack);
+
/* If the input device is registered with the input subsystem
* then we need to use a different deallocator. */
if (jack->registered)
diff --git a/sound/core/pcm_compat.c b/sound/core/pcm_compat.c
index 36d7a59..08bfed5 100644
--- a/sound/core/pcm_compat.c
+++ b/sound/core/pcm_compat.c
@@ -232,14 +232,11 @@
if (! (runtime = substream->runtime))
return -ENOTTY;
- data = kmalloc(sizeof(*data), GFP_KERNEL);
- if (data == NULL)
- return -ENOMEM;
/* only fifo_size is different, so just copy all */
- if (copy_from_user(data, data32, sizeof(*data32))) {
- err = -EFAULT;
- goto error;
- }
+ data = memdup_user(data32, sizeof(*data32));
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
if (refine)
err = snd_pcm_hw_refine(substream, data);
else
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index fbb2e39..63d088f 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -209,9 +209,11 @@
{
struct snd_pcm_runtime *runtime = substream->runtime;
snd_pcm_uframes_t pos;
- snd_pcm_uframes_t new_hw_ptr, hw_ptr_interrupt, hw_base;
- snd_pcm_sframes_t delta;
+ snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_ptr_interrupt, hw_base;
+ snd_pcm_sframes_t hdelta, delta;
+ unsigned long jdelta;
+ old_hw_ptr = runtime->status->hw_ptr;
pos = snd_pcm_update_hw_ptr_pos(substream, runtime);
if (pos == SNDRV_PCM_POS_XRUN) {
xrun(substream);
@@ -247,7 +249,30 @@
new_hw_ptr = hw_base + pos;
}
}
- if (delta > runtime->period_size) {
+ hdelta = new_hw_ptr - old_hw_ptr;
+ jdelta = jiffies - runtime->hw_ptr_jiffies;
+ if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) {
+ delta = jdelta /
+ (((runtime->period_size * HZ) / runtime->rate)
+ + HZ/100);
+ hw_ptr_error(substream,
+ "hw_ptr skipping! [Q] "
+ "(pos=%ld, delta=%ld, period=%ld, "
+ "jdelta=%lu/%lu/%lu)\n",
+ (long)pos, (long)hdelta,
+ (long)runtime->period_size, jdelta,
+ ((hdelta * HZ) / runtime->rate), delta);
+ hw_ptr_interrupt = runtime->hw_ptr_interrupt +
+ runtime->period_size * delta;
+ if (hw_ptr_interrupt >= runtime->boundary)
+ hw_ptr_interrupt -= runtime->boundary;
+ /* rebase to interrupt position */
+ hw_base = new_hw_ptr = hw_ptr_interrupt;
+ /* align hw_base to buffer_size */
+ hw_base -= hw_base % runtime->buffer_size;
+ delta = 0;
+ }
+ if (delta > runtime->period_size + runtime->period_size / 2) {
hw_ptr_error(substream,
"Lost interrupts? "
"(stream=%i, delta=%ld, intr_ptr=%ld)\n",
@@ -263,6 +288,7 @@
runtime->hw_ptr_base = hw_base;
runtime->status->hw_ptr = new_hw_ptr;
+ runtime->hw_ptr_jiffies = jiffies;
runtime->hw_ptr_interrupt = hw_ptr_interrupt;
return snd_pcm_update_hw_ptr_post(substream, runtime);
@@ -275,6 +301,7 @@
snd_pcm_uframes_t pos;
snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_base;
snd_pcm_sframes_t delta;
+ unsigned long jdelta;
old_hw_ptr = runtime->status->hw_ptr;
pos = snd_pcm_update_hw_ptr_pos(substream, runtime);
@@ -286,14 +313,15 @@
new_hw_ptr = hw_base + pos;
delta = new_hw_ptr - old_hw_ptr;
+ jdelta = jiffies - runtime->hw_ptr_jiffies;
if (delta < 0) {
delta += runtime->buffer_size;
if (delta < 0) {
hw_ptr_error(substream,
"Unexpected hw_pointer value [2] "
- "(stream=%i, pos=%ld, old_ptr=%ld)\n",
+ "(stream=%i, pos=%ld, old_ptr=%ld, jdelta=%li)\n",
substream->stream, (long)pos,
- (long)old_hw_ptr);
+ (long)old_hw_ptr, jdelta);
return 0;
}
hw_base += runtime->buffer_size;
@@ -301,12 +329,13 @@
hw_base = 0;
new_hw_ptr = hw_base + pos;
}
- if (delta > runtime->period_size && runtime->periods > 1) {
+ if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
hw_ptr_error(substream,
"hw_ptr skipping! "
- "(pos=%ld, delta=%ld, period=%ld)\n",
+ "(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n",
(long)pos, (long)delta,
- (long)runtime->period_size);
+ (long)runtime->period_size, jdelta,
+ ((delta * HZ) / runtime->rate));
return 0;
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
@@ -315,6 +344,7 @@
runtime->hw_ptr_base = hw_base;
runtime->status->hw_ptr = new_hw_ptr;
+ runtime->hw_ptr_jiffies = jiffies;
return snd_pcm_update_hw_ptr_post(substream, runtime);
}
@@ -1441,6 +1471,7 @@
runtime->status->hw_ptr %= runtime->buffer_size;
else
runtime->status->hw_ptr = 0;
+ runtime->hw_ptr_jiffies = jiffies;
snd_pcm_stream_unlock_irqrestore(substream, flags);
return 0;
}
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index a151fb0..fc6f98e 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -327,21 +327,16 @@
struct snd_pcm_hw_params *params;
int err;
- params = kmalloc(sizeof(*params), GFP_KERNEL);
- if (!params) {
- err = -ENOMEM;
- goto out;
- }
- if (copy_from_user(params, _params, sizeof(*params))) {
- err = -EFAULT;
- goto out;
- }
+ params = memdup_user(_params, sizeof(*params));
+ if (IS_ERR(params))
+ return PTR_ERR(params);
+
err = snd_pcm_hw_refine(substream, params);
if (copy_to_user(_params, params, sizeof(*params))) {
if (!err)
err = -EFAULT;
}
-out:
+
kfree(params);
return err;
}
@@ -465,21 +460,16 @@
struct snd_pcm_hw_params *params;
int err;
- params = kmalloc(sizeof(*params), GFP_KERNEL);
- if (!params) {
- err = -ENOMEM;
- goto out;
- }
- if (copy_from_user(params, _params, sizeof(*params))) {
- err = -EFAULT;
- goto out;
- }
+ params = memdup_user(_params, sizeof(*params));
+ if (IS_ERR(params))
+ return PTR_ERR(params);
+
err = snd_pcm_hw_params(substream, params);
if (copy_to_user(_params, params, sizeof(*params))) {
if (!err)
err = -EFAULT;
}
-out:
+
kfree(params);
return err;
}
@@ -2593,13 +2583,11 @@
return -EFAULT;
if (copy_from_user(&xfern, _xfern, sizeof(xfern)))
return -EFAULT;
- bufs = kmalloc(sizeof(void *) * runtime->channels, GFP_KERNEL);
- if (bufs == NULL)
- return -ENOMEM;
- if (copy_from_user(bufs, xfern.bufs, sizeof(void *) * runtime->channels)) {
- kfree(bufs);
- return -EFAULT;
- }
+
+ bufs = memdup_user(xfern.bufs,
+ sizeof(void *) * runtime->channels);
+ if (IS_ERR(bufs))
+ return PTR_ERR(bufs);
result = snd_pcm_lib_writev(substream, bufs, xfern.frames);
kfree(bufs);
__put_user(result, &_xfern->result);
@@ -2675,13 +2663,11 @@
return -EFAULT;
if (copy_from_user(&xfern, _xfern, sizeof(xfern)))
return -EFAULT;
- bufs = kmalloc(sizeof(void *) * runtime->channels, GFP_KERNEL);
- if (bufs == NULL)
- return -ENOMEM;
- if (copy_from_user(bufs, xfern.bufs, sizeof(void *) * runtime->channels)) {
- kfree(bufs);
- return -EFAULT;
- }
+
+ bufs = memdup_user(xfern.bufs,
+ sizeof(void *) * runtime->channels);
+ if (IS_ERR(bufs))
+ return PTR_ERR(bufs);
result = snd_pcm_lib_readv(substream, bufs, xfern.frames);
kfree(bufs);
__put_user(result, &_xfern->result);
@@ -3312,18 +3298,12 @@
int err;
params = kmalloc(sizeof(*params), GFP_KERNEL);
- if (!params) {
- err = -ENOMEM;
- goto out;
- }
- oparams = kmalloc(sizeof(*oparams), GFP_KERNEL);
- if (!oparams) {
- err = -ENOMEM;
- goto out;
- }
+ if (!params)
+ return -ENOMEM;
- if (copy_from_user(oparams, _oparams, sizeof(*oparams))) {
- err = -EFAULT;
+ oparams = memdup_user(_oparams, sizeof(*oparams));
+ if (IS_ERR(oparams)) {
+ err = PTR_ERR(oparams);
goto out;
}
snd_pcm_hw_convert_from_old_params(params, oparams);
@@ -3333,9 +3313,10 @@
if (!err)
err = -EFAULT;
}
+
+ kfree(oparams);
out:
kfree(params);
- kfree(oparams);
return err;
}
@@ -3347,17 +3328,12 @@
int err;
params = kmalloc(sizeof(*params), GFP_KERNEL);
- if (!params) {
- err = -ENOMEM;
- goto out;
- }
- oparams = kmalloc(sizeof(*oparams), GFP_KERNEL);
- if (!oparams) {
- err = -ENOMEM;
- goto out;
- }
- if (copy_from_user(oparams, _oparams, sizeof(*oparams))) {
- err = -EFAULT;
+ if (!params)
+ return -ENOMEM;
+
+ oparams = memdup_user(_oparams, sizeof(*oparams));
+ if (IS_ERR(oparams)) {
+ err = PTR_ERR(oparams);
goto out;
}
snd_pcm_hw_convert_from_old_params(params, oparams);
@@ -3367,9 +3343,10 @@
if (!err)
err = -EFAULT;
}
+
+ kfree(oparams);
out:
kfree(params);
- kfree(oparams);
return err;
}
#endif /* CONFIG_SND_SUPPORT_OLD_API */
diff --git a/sound/core/seq/seq_compat.c b/sound/core/seq/seq_compat.c
index 38693f4..c956fe4 100644
--- a/sound/core/seq/seq_compat.c
+++ b/sound/core/seq/seq_compat.c
@@ -48,12 +48,11 @@
struct snd_seq_port_info *data;
mm_segment_t fs;
- data = kmalloc(sizeof(*data), GFP_KERNEL);
- if (! data)
- return -ENOMEM;
+ data = memdup_user(data32, sizeof(*data32));
+ if (IS_ERR(data))
+ return PTR_ERR(data);
- if (copy_from_user(data, data32, sizeof(*data32)) ||
- get_user(data->flags, &data32->flags) ||
+ if (get_user(data->flags, &data32->flags) ||
get_user(data->time_queue, &data32->time_queue))
goto error;
data->kernel = NULL;
diff --git a/sound/core/timer.c b/sound/core/timer.c
index 3f0050d..8f8b17a 100644
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -1395,13 +1395,10 @@
struct list_head *p;
int err = 0;
- ginfo = kmalloc(sizeof(*ginfo), GFP_KERNEL);
- if (! ginfo)
- return -ENOMEM;
- if (copy_from_user(ginfo, _ginfo, sizeof(*ginfo))) {
- kfree(ginfo);
- return -EFAULT;
- }
+ ginfo = memdup_user(_ginfo, sizeof(*ginfo));
+ if (IS_ERR(ginfo))
+ return PTR_ERR(ginfo);
+
tid = ginfo->tid;
memset(ginfo, 0, sizeof(*ginfo));
ginfo->tid = tid;
diff --git a/sound/isa/sb/sb16_csp.c b/sound/isa/sb/sb16_csp.c
index 49037d0..bdc8dde 100644
--- a/sound/isa/sb/sb16_csp.c
+++ b/sound/isa/sb/sb16_csp.c
@@ -684,15 +684,16 @@
static int snd_sb_csp_load_user(struct snd_sb_csp * p, const unsigned char __user *buf, int size, int load_flags)
{
- int err = -ENOMEM;
- unsigned char *kbuf = kmalloc(size, GFP_KERNEL);
- if (kbuf) {
- if (copy_from_user(kbuf, buf, size))
- err = -EFAULT;
- else
- err = snd_sb_csp_load(p, kbuf, size, load_flags);
- kfree(kbuf);
- }
+ int err;
+ unsigned char *kbuf;
+
+ kbuf = memdup_user(buf, size);
+ if (IS_ERR(kbuf))
+ return PTR_ERR(kbuf);
+
+ err = snd_sb_csp_load(p, kbuf, size, load_flags);
+
+ kfree(kbuf);
return err;
}
diff --git a/sound/isa/wavefront/wavefront_fx.c b/sound/isa/wavefront/wavefront_fx.c
index a4345fc..2bb1cee 100644
--- a/sound/isa/wavefront/wavefront_fx.c
+++ b/sound/isa/wavefront/wavefront_fx.c
@@ -202,15 +202,11 @@
"> 512 bytes to FX\n");
return -EIO;
}
- page_data = kmalloc(r.data[2] * sizeof(short), GFP_KERNEL);
- if (!page_data)
- return -ENOMEM;
- if (copy_from_user (page_data,
- (unsigned char __user *) r.data[3],
- r.data[2] * sizeof(short))) {
- kfree(page_data);
- return -EFAULT;
- }
+ page_data = memdup_user((unsigned char __user *)
+ r.data[3],
+ r.data[2] * sizeof(short));
+ if (IS_ERR(page_data))
+ return PTR_ERR(page_data);
pd = page_data;
}
diff --git a/sound/isa/wavefront/wavefront_synth.c b/sound/isa/wavefront/wavefront_synth.c
index beb312c..5d4ff48 100644
--- a/sound/isa/wavefront/wavefront_synth.c
+++ b/sound/isa/wavefront/wavefront_synth.c
@@ -1664,12 +1664,11 @@
break;
case WFCTL_WFCMD:
- wc = kmalloc(sizeof(*wc), GFP_KERNEL);
- if (! wc)
- return -ENOMEM;
- if (copy_from_user (wc, argp, sizeof (*wc)))
- err = -EFAULT;
- else if (wavefront_synth_control (acard, wc) < 0)
+ wc = memdup_user(argp, sizeof(*wc));
+ if (IS_ERR(wc))
+ return PTR_ERR(wc);
+
+ if (wavefront_synth_control (acard, wc) < 0)
err = -EIO;
else if (copy_to_user (argp, wc, sizeof (*wc)))
err = -EFAULT;
diff --git a/sound/pci/emu10k1/emufx.c b/sound/pci/emu10k1/emufx.c
index 191e1cd..4b302d8 100644
--- a/sound/pci/emu10k1/emufx.c
+++ b/sound/pci/emu10k1/emufx.c
@@ -2493,24 +2493,17 @@
case SNDRV_EMU10K1_IOCTL_CODE_POKE:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- icode = kmalloc(sizeof(*icode), GFP_KERNEL);
- if (icode == NULL)
- return -ENOMEM;
- if (copy_from_user(icode, argp, sizeof(*icode))) {
- kfree(icode);
- return -EFAULT;
- }
+
+ icode = memdup_user(argp, sizeof(*icode));
+ if (IS_ERR(icode))
+ return PTR_ERR(icode);
res = snd_emu10k1_icode_poke(emu, icode);
kfree(icode);
return res;
case SNDRV_EMU10K1_IOCTL_CODE_PEEK:
- icode = kmalloc(sizeof(*icode), GFP_KERNEL);
- if (icode == NULL)
- return -ENOMEM;
- if (copy_from_user(icode, argp, sizeof(*icode))) {
- kfree(icode);
- return -EFAULT;
- }
+ icode = memdup_user(argp, sizeof(*icode));
+ if (IS_ERR(icode))
+ return PTR_ERR(icode);
res = snd_emu10k1_icode_peek(emu, icode);
if (res == 0 && copy_to_user(argp, icode, sizeof(*icode))) {
kfree(icode);
@@ -2519,24 +2512,16 @@
kfree(icode);
return res;
case SNDRV_EMU10K1_IOCTL_PCM_POKE:
- ipcm = kmalloc(sizeof(*ipcm), GFP_KERNEL);
- if (ipcm == NULL)
- return -ENOMEM;
- if (copy_from_user(ipcm, argp, sizeof(*ipcm))) {
- kfree(ipcm);
- return -EFAULT;
- }
+ ipcm = memdup_user(argp, sizeof(*ipcm));
+ if (IS_ERR(ipcm))
+ return PTR_ERR(ipcm);
res = snd_emu10k1_ipcm_poke(emu, ipcm);
kfree(ipcm);
return res;
case SNDRV_EMU10K1_IOCTL_PCM_PEEK:
- ipcm = kzalloc(sizeof(*ipcm), GFP_KERNEL);
- if (ipcm == NULL)
- return -ENOMEM;
- if (copy_from_user(ipcm, argp, sizeof(*ipcm))) {
- kfree(ipcm);
- return -EFAULT;
- }
+ ipcm = memdup_user(argp, sizeof(*ipcm));
+ if (IS_ERR(ipcm))
+ return PTR_ERR(ipcm);
res = snd_emu10k1_ipcm_peek(emu, ipcm);
if (res == 0 && copy_to_user(argp, ipcm, sizeof(*ipcm))) {
kfree(ipcm);
diff --git a/sound/pci/emu10k1/io.c b/sound/pci/emu10k1/io.c
index 4bfc31d..c1a5aa1 100644
--- a/sound/pci/emu10k1/io.c
+++ b/sound/pci/emu10k1/io.c
@@ -490,7 +490,7 @@
if (newtime != curtime)
break;
}
- if (count >= 16384)
+ if (count > 16384)
break;
curtime = newtime;
}
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index a4e5e59..8820faf 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -642,19 +642,21 @@
*/
static void /*__devinit*/ setup_fg_nodes(struct hda_codec *codec)
{
- int i, total_nodes;
+ int i, total_nodes, function_id;
hda_nid_t nid;
total_nodes = snd_hda_get_sub_nodes(codec, AC_NODE_ROOT, &nid);
for (i = 0; i < total_nodes; i++, nid++) {
- codec->function_id = snd_hda_param_read(codec, nid,
+ function_id = snd_hda_param_read(codec, nid,
AC_PAR_FUNCTION_TYPE) & 0xff;
- switch (codec->function_id) {
+ switch (function_id) {
case AC_GRP_AUDIO_FUNCTION:
codec->afg = nid;
+ codec->function_id = function_id;
break;
case AC_GRP_MODEM_FUNCTION:
codec->mfg = nid;
+ codec->function_id = function_id;
break;
default:
break;
@@ -2250,7 +2252,11 @@
err = bus->ops.command(bus, res);
if (!err) {
struct hda_cache_head *c;
- u32 key = build_cmd_cache_key(nid, verb);
+ u32 key;
+ /* parm may contain the verb stuff for get/set amp */
+ verb = verb | (parm >> 8);
+ parm &= 0xff;
+ key = build_cmd_cache_key(nid, verb);
c = get_alloc_hash(&codec->cmd_cache, key);
if (c)
c->val = parm;
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 30829ee..21e99cf 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -312,6 +312,8 @@
unsigned int period_bytes; /* size of the period in bytes */
unsigned int frags; /* number for period in the play buffer */
unsigned int fifo_size; /* FIFO size */
+ unsigned long start_jiffies; /* start + minimum jiffies */
+ unsigned long min_jiffies; /* minimum jiffies before position is valid */
void __iomem *sd_addr; /* stream descriptor pointer */
@@ -330,7 +332,7 @@
unsigned int opened :1;
unsigned int running :1;
unsigned int irq_pending :1;
- unsigned int irq_ignore :1;
+ unsigned int start_flag: 1; /* stream full start flag */
/*
* For VIA:
* A flag to ensure DMA position is 0
@@ -975,7 +977,7 @@
struct azx *chip = dev_id;
struct azx_dev *azx_dev;
u32 status;
- int i;
+ int i, ok;
spin_lock(&chip->reg_lock);
@@ -991,18 +993,14 @@
azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK);
if (!azx_dev->substream || !azx_dev->running)
continue;
- /* ignore the first dummy IRQ (due to pos_adj) */
- if (azx_dev->irq_ignore) {
- azx_dev->irq_ignore = 0;
- continue;
- }
/* check whether this IRQ is really acceptable */
- if (azx_position_ok(chip, azx_dev)) {
+ ok = azx_position_ok(chip, azx_dev);
+ if (ok == 1) {
azx_dev->irq_pending = 0;
spin_unlock(&chip->reg_lock);
snd_pcm_period_elapsed(azx_dev->substream);
spin_lock(&chip->reg_lock);
- } else if (chip->bus && chip->bus->workq) {
+ } else if (ok == 0 && chip->bus && chip->bus->workq) {
/* bogus IRQ, process it later */
azx_dev->irq_pending = 1;
queue_work(chip->bus->workq,
@@ -1088,7 +1086,6 @@
bdl = (u32 *)azx_dev->bdl.area;
ofs = 0;
azx_dev->frags = 0;
- azx_dev->irq_ignore = 0;
pos_adj = bdl_pos_adj[chip->dev_index];
if (pos_adj > 0) {
struct snd_pcm_runtime *runtime = substream->runtime;
@@ -1109,7 +1106,6 @@
&bdl, ofs, pos_adj, 1);
if (ofs < 0)
goto error;
- azx_dev->irq_ignore = 1;
}
} else
pos_adj = 0;
@@ -1155,6 +1151,9 @@
while (((val = azx_sd_readb(azx_dev, SD_CTL)) & SD_CTL_STREAM_RESET) &&
--timeout)
;
+
+ /* reset first position - may not be synced with hw at this time */
+ *azx_dev->posbuf = 0;
}
/*
@@ -1409,7 +1408,6 @@
snd_pcm_set_sync(substream);
mutex_unlock(&chip->open_mutex);
- azx_stream_reset(chip, azx_dev);
return 0;
}
@@ -1474,6 +1472,7 @@
unsigned int bufsize, period_bytes, format_val;
int err;
+ azx_stream_reset(chip, azx_dev);
format_val = snd_hda_calc_stream_format(runtime->rate,
runtime->channels,
runtime->format,
@@ -1502,6 +1501,8 @@
return err;
}
+ azx_dev->min_jiffies = (runtime->period_size * HZ) /
+ (runtime->rate * 2);
azx_setup_controller(chip, azx_dev);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
azx_dev->fifo_size = azx_sd_readw(azx_dev, SD_FIFOSIZE) + 1;
@@ -1518,13 +1519,14 @@
struct azx *chip = apcm->chip;
struct azx_dev *azx_dev;
struct snd_pcm_substream *s;
- int start, nsync = 0, sbits = 0;
+ int rstart = 0, start, nsync = 0, sbits = 0;
int nwait, timeout;
switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ rstart = 1;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_START:
start = 1;
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
@@ -1554,6 +1556,10 @@
if (s->pcm->card != substream->pcm->card)
continue;
azx_dev = get_azx_dev(s);
+ if (rstart) {
+ azx_dev->start_flag = 1;
+ azx_dev->start_jiffies = jiffies + azx_dev->min_jiffies;
+ }
if (start)
azx_stream_start(chip, azx_dev);
else
@@ -1703,6 +1709,11 @@
{
unsigned int pos;
+ if (azx_dev->start_flag &&
+ time_before_eq(jiffies, azx_dev->start_jiffies))
+ return -1; /* bogus (too early) interrupt */
+ azx_dev->start_flag = 0;
+
pos = azx_get_position(chip, azx_dev);
if (chip->position_fix == POS_FIX_AUTO) {
if (!pos) {
@@ -2260,11 +2271,11 @@
gcap &= ~0x01;
/* allow 64bit DMA address if supported by H/W */
- if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_64BIT_MASK))
- pci_set_consistent_dma_mask(pci, DMA_64BIT_MASK);
+ if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
else {
- pci_set_dma_mask(pci, DMA_32BIT_MASK);
- pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK);
+ pci_set_dma_mask(pci, DMA_BIT_MASK(32));
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32));
}
/* read number of streams from GCAP register instead of using
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 38ad3f7..9bcd8ab 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -3977,6 +3977,14 @@
spec->input_mux = &ad1884a_laptop_capture_source;
codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
codec->patch_ops.init = ad1884a_hp_init;
+ /* set the upper-limit for mixer amp to 0dB for avoiding the
+ * possible damage by overloading
+ */
+ snd_hda_override_amp_caps(codec, 0x20, HDA_INPUT,
+ (0x17 << AC_AMPCAP_OFFSET_SHIFT) |
+ (0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) |
+ (0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) |
+ (1 << AC_AMPCAP_MUTE_SHIFT));
break;
case AD1884A_MOBILE:
spec->mixers[0] = ad1884a_mobile_mixers;
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 1f2ad76..56ce19e 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -350,12 +350,20 @@
}
#ifdef CONFIG_SND_JACK
+static void conexant_free_jack_priv(struct snd_jack *jack)
+{
+ struct conexant_jack *jacks = jack->private_data;
+ jacks->nid = 0;
+ jacks->jack = NULL;
+}
+
static int conexant_add_jack(struct hda_codec *codec,
hda_nid_t nid, int type)
{
struct conexant_spec *spec;
struct conexant_jack *jack;
const char *name;
+ int err;
spec = codec->spec;
snd_array_init(&spec->jacks, sizeof(*jack), 32);
@@ -368,7 +376,12 @@
jack->nid = nid;
jack->type = type;
- return snd_jack_new(codec->bus->card, name, type, &jack->jack);
+ err = snd_jack_new(codec->bus->card, name, type, &jack->jack);
+ if (err < 0)
+ return err;
+ jack->jack->private_data = jack;
+ jack->jack->private_free = conexant_free_jack_priv;
+ return 0;
}
static void conexant_report_jack(struct hda_codec *codec, hda_nid_t nid)
@@ -455,8 +468,10 @@
if (spec->jacks.list) {
struct conexant_jack *jacks = spec->jacks.list;
int i;
- for (i = 0; i < spec->jacks.used; i++)
- snd_device_free(codec->bus->card, &jacks[i].jack);
+ for (i = 0; i < spec->jacks.used; i++, jacks++) {
+ if (jacks->jack)
+ snd_device_free(codec->bus->card, jacks->jack);
+ }
snd_array_free(&spec->jacks);
}
#endif
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index f35e58a..6ed787ee 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8742,10 +8742,9 @@
SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC883_LAPTOP_EAPD),
SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch),
SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION),
- SND_PCI_QUIRK(0x1734, 0x1107, "FSC AMILO Xi2550",
+ SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1100, "FSC AMILO Xi/Pi25xx",
ALC883_FUJITSU_PI2515),
- SND_PCI_QUIRK(0x1734, 0x1108, "Fujitsu AMILO Pi2515", ALC883_FUJITSU_PI2515),
- SND_PCI_QUIRK(0x1734, 0x113d, "Fujitsu AMILO Xa3530",
+ SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1130, "Fujitsu AMILO Xa35xx",
ALC888_FUJITSU_XA3530),
SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo 101e", ALC883_LENOVO_101E_2ch),
SND_PCI_QUIRK(0x17aa, 0x2085, "Lenovo NB0763", ALC883_LENOVO_NB0763),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 61996a2..917bc5d 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -3076,6 +3076,11 @@
unsigned int wid_caps;
for (i = 0; i < num_outs && i < ARRAY_SIZE(chname); i++) {
+ if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) {
+ wid_caps = get_wcaps(codec, pins[i]);
+ if (wid_caps & AC_WCAP_UNSOL_CAP)
+ spec->hp_detect = 1;
+ }
nid = dac_nids[i];
if (!nid)
continue;
@@ -3119,11 +3124,6 @@
err = create_controls_idx(codec, name, idx, nid, 3);
if (err < 0)
return err;
- if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) {
- wid_caps = get_wcaps(codec, pins[i]);
- if (wid_caps & AC_WCAP_UNSOL_CAP)
- spec->hp_detect = 1;
- }
}
}
return 0;
@@ -3851,6 +3851,15 @@
AC_VERB_SET_GPIO_DATA, gpiostate); /* sync */
}
+#ifdef CONFIG_SND_JACK
+static void stac92xx_free_jack_priv(struct snd_jack *jack)
+{
+ struct sigmatel_jack *jacks = jack->private_data;
+ jacks->nid = 0;
+ jacks->jack = NULL;
+}
+#endif
+
static int stac92xx_add_jack(struct hda_codec *codec,
hda_nid_t nid, int type)
{
@@ -3860,6 +3869,7 @@
int def_conf = snd_hda_codec_get_pincfg(codec, nid);
int connectivity = get_defcfg_connect(def_conf);
char name[32];
+ int err;
if (connectivity && connectivity != AC_JACK_PORT_FIXED)
return 0;
@@ -3876,10 +3886,15 @@
snd_hda_get_jack_connectivity(def_conf),
snd_hda_get_jack_location(def_conf));
- return snd_jack_new(codec->bus->card, name, type, &jack->jack);
-#else
- return 0;
+ err = snd_jack_new(codec->bus->card, name, type, &jack->jack);
+ if (err < 0) {
+ jack->nid = 0;
+ return err;
+ }
+ jack->jack->private_data = jack;
+ jack->jack->private_free = stac92xx_free_jack_priv;
#endif
+ return 0;
}
static int stac_add_event(struct sigmatel_spec *spec, hda_nid_t nid,
@@ -4138,8 +4153,10 @@
if (!codec->bus->shutdown && spec->jacks.list) {
struct sigmatel_jack *jacks = spec->jacks.list;
int i;
- for (i = 0; i < spec->jacks.used; i++)
- snd_device_free(codec->bus->card, &jacks[i].jack);
+ for (i = 0; i < spec->jacks.used; i++, jacks++) {
+ if (jacks->jack)
+ snd_device_free(codec->bus->card, jacks->jack);
+ }
}
snd_array_free(&spec->jacks);
#endif
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 5764881..8042d53 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -355,6 +355,9 @@
unsigned int fragsize1;
unsigned int position;
unsigned int pos_shift;
+ unsigned int last_pos;
+ unsigned long last_pos_jiffies;
+ unsigned int jiffy_to_bytes;
int frags;
int lvi;
int lvi_frag;
@@ -838,7 +841,10 @@
ichdev->suspended = 0;
/* fallthru */
case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
val = ICH_IOCE | ICH_STARTBM;
+ ichdev->last_pos = ichdev->position;
+ ichdev->last_pos_jiffies = jiffies;
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
ichdev->suspended = 1;
@@ -849,9 +855,6 @@
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
val = ICH_IOCE;
break;
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- val = ICH_IOCE | ICH_STARTBM;
- break;
default:
return -EINVAL;
}
@@ -1045,6 +1048,7 @@
ichdev->pos_shift = (runtime->sample_bits > 16) ? 2 : 1;
}
snd_intel8x0_setup_periods(chip, ichdev);
+ ichdev->jiffy_to_bytes = (runtime->rate * 4 * ichdev->pos_shift) / HZ;
return 0;
}
@@ -1053,7 +1057,7 @@
struct intel8x0 *chip = snd_pcm_substream_chip(substream);
struct ichdev *ichdev = get_ichdev(substream);
size_t ptr1, ptr;
- int civ, timeout = 100;
+ int civ, timeout = 10;
unsigned int position;
spin_lock(&chip->reg_lock);
@@ -1069,9 +1073,19 @@
ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
break;
} while (timeout--);
- ptr1 <<= ichdev->pos_shift;
- ptr = ichdev->fragsize1 - ptr1;
- ptr += position;
+ if (ptr1 != 0) {
+ ptr1 <<= ichdev->pos_shift;
+ ptr = ichdev->fragsize1 - ptr1;
+ ptr += position;
+ ichdev->last_pos = ptr;
+ ichdev->last_pos_jiffies = jiffies;
+ } else {
+ ptr1 = jiffies - ichdev->last_pos_jiffies;
+ if (ptr1)
+ ptr1 -= 1;
+ ptr = ichdev->last_pos + ptr1 * ichdev->jiffy_to_bytes;
+ ptr %= ichdev->size;
+ }
spin_unlock(&chip->reg_lock);
if (ptr >= ichdev->size)
return 0;
@@ -1840,6 +1854,12 @@
},
{
.subvendor = 0x1028,
+ .subdevice = 0x016a,
+ .name = "Dell Inspiron 8600", /* STAC9750/51 */
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .subvendor = 0x1028,
.subdevice = 0x0186,
.name = "Dell Latitude D810", /* cf. Malone #41015 */
.type = AC97_TUNE_HP_MUTE_LED
@@ -1882,12 +1902,6 @@
},
{
.subvendor = 0x103c,
- .subdevice = 0x0934,
- .name = "HP nx8220",
- .type = AC97_TUNE_MUTE_LED
- },
- {
- .subvendor = 0x103c,
.subdevice = 0x129d,
.name = "HP xw8000",
.type = AC97_TUNE_HP_ONLY
@@ -2661,12 +2675,14 @@
struct snd_pcm_substream *subs;
struct ichdev *ichdev;
unsigned long port;
- unsigned long pos, t;
- struct timeval start_time, stop_time;
+ unsigned long pos, pos1, t;
+ int civ, timeout = 1000, attempt = 1;
+ struct timespec start_time, stop_time;
if (chip->ac97_bus->clock != 48000)
return; /* specified in module option */
+ __again:
subs = chip->pcm[0]->streams[0].substream;
if (! subs || subs->dma_buffer.bytes < INTEL8X0_TESTBUF_SIZE) {
snd_printk(KERN_WARNING "no playback buffer allocated - aborting measure ac97 clock\n");
@@ -2674,7 +2690,7 @@
}
ichdev = &chip->ichd[ICHD_PCMOUT];
ichdev->physbuf = subs->dma_buffer.addr;
- ichdev->size = chip->ichd[ICHD_PCMOUT].fragsize = INTEL8X0_TESTBUF_SIZE;
+ ichdev->size = ichdev->fragsize = INTEL8X0_TESTBUF_SIZE;
ichdev->substream = NULL; /* don't process interrupts */
/* set rate */
@@ -2693,16 +2709,31 @@
iputbyte(chip, port + ICH_REG_OFF_CR, ICH_IOCE);
iputdword(chip, ICHREG(ALI_DMACR), 1 << ichdev->ali_slot);
}
- do_gettimeofday(&start_time);
+ do_posix_clock_monotonic_gettime(&start_time);
spin_unlock_irq(&chip->reg_lock);
msleep(50);
spin_lock_irq(&chip->reg_lock);
/* check the position */
- pos = ichdev->fragsize1;
- pos -= igetword(chip, ichdev->reg_offset + ichdev->roff_picb) << ichdev->pos_shift;
- pos += ichdev->position;
+ do {
+ civ = igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV);
+ pos1 = igetword(chip, ichdev->reg_offset + ichdev->roff_picb);
+ if (pos1 == 0) {
+ udelay(10);
+ continue;
+ }
+ if (civ == igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV) &&
+ pos1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
+ break;
+ } while (timeout--);
+ if (pos1 == 0) { /* oops, this value is not reliable */
+ pos = 0;
+ } else {
+ pos = ichdev->fragsize1;
+ pos -= pos1 << ichdev->pos_shift;
+ pos += ichdev->position;
+ }
chip->in_measurement = 0;
- do_gettimeofday(&stop_time);
+ do_posix_clock_monotonic_gettime(&stop_time);
/* stop */
if (chip->device_type == DEVICE_ALI) {
iputdword(chip, ICHREG(ALI_DMACR), 1 << (ichdev->ali_slot + 16));
@@ -2717,19 +2748,37 @@
iputbyte(chip, port + ICH_REG_OFF_CR, ICH_RESETREGS);
spin_unlock_irq(&chip->reg_lock);
- t = stop_time.tv_sec - start_time.tv_sec;
- t *= 1000000;
- t += stop_time.tv_usec - start_time.tv_usec;
- printk(KERN_INFO "%s: measured %lu usecs\n", __func__, t);
- if (t == 0) {
- snd_printk(KERN_ERR "?? calculation error..\n");
+ if (pos == 0) {
+ snd_printk(KERN_ERR "intel8x0: measure - unreliable DMA position..\n");
+ __retry:
+ if (attempt < 2) {
+ attempt++;
+ goto __again;
+ }
return;
}
- pos = (pos / 4) * 1000;
+
+ pos /= 4;
+ t = stop_time.tv_sec - start_time.tv_sec;
+ t *= 1000000;
+ t += (stop_time.tv_nsec - start_time.tv_nsec) / 1000;
+ printk(KERN_INFO "%s: measured %lu usecs (%lu samples)\n", __func__, t, pos);
+ if (t == 0) {
+ snd_printk(KERN_ERR "intel8x0: ?? calculation error..\n");
+ goto __retry;
+ }
+ pos *= 1000;
pos = (pos / t) * 1000 + ((pos % t) * 1000) / t;
- if (pos < 40000 || pos >= 60000)
+ if (pos < 40000 || pos >= 60000) {
/* abnormal value. hw problem? */
printk(KERN_INFO "intel8x0: measured clock %ld rejected\n", pos);
+ goto __retry;
+ } else if (pos > 40500 && pos < 41500)
+ /* first exception - 41000Hz reference clock */
+ chip->ac97_bus->clock = 41000;
+ else if (pos > 43600 && pos < 44600)
+ /* second exception - 44100HZ reference clock */
+ chip->ac97_bus->clock = 44100;
else if (pos < 47500 || pos > 48500)
/* not 48000Hz, tuning the clock.. */
chip->ac97_bus->clock = (chip->ac97_bus->clock * 48000) / pos;
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 9c09b94..90f4df7 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -283,7 +283,7 @@
break;
case SND_SOC_DAIFMT_DSP_B:
regs->srgr2 |= FPER(wlen * channels - 1);
- regs->srgr1 |= FWID(wlen * channels - 2);
+ regs->srgr1 |= FWID(0);
break;
}
@@ -302,6 +302,7 @@
{
struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
+ unsigned int temp_fmt = fmt;
if (mcbsp_data->configured)
return 0;
@@ -328,6 +329,8 @@
/* 0-bit data delay */
regs->rcr2 |= RDATDLY(0);
regs->xcr2 |= XDATDLY(0);
+ /* Invert FS polarity configuration */
+ temp_fmt ^= SND_SOC_DAIFMT_NB_IF;
break;
default:
/* Unsupported data format */
@@ -351,7 +354,7 @@
}
/* Set bit clock (CLKX/CLKR) and FS polarities */
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ switch (temp_fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
/*
* Normal BCLK + FS.
diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c
index a952a4e..a4e149b7 100644
--- a/sound/soc/omap/osk5912.c
+++ b/sound/soc/omap/osk5912.c
@@ -62,7 +62,7 @@
/* Set codec DAI configuration */
err = snd_soc_dai_set_fmt(codec_dai,
SND_SOC_DAIFMT_DSP_B |
- SND_SOC_DAIFMT_NB_IF |
+ SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBM_CFM);
if (err < 0) {
printk(KERN_ERR "can't set codec DAI configuration\n");
@@ -72,7 +72,7 @@
/* Set cpu DAI configuration */
err = snd_soc_dai_set_fmt(cpu_dai,
SND_SOC_DAIFMT_DSP_B |
- SND_SOC_DAIFMT_NB_IF |
+ SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBM_CFM);
if (err < 0) {
printk(KERN_ERR "can't set cpu DAI configuration\n");
diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c
index f7c4544..0625c34 100644
--- a/sound/soc/pxa/magician.c
+++ b/sound/soc/pxa/magician.c
@@ -27,8 +27,6 @@
#include <sound/soc.h>
#include <sound/soc-dapm.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/magician.h>
#include <asm/mach-types.h>
#include "../codecs/uda1380.h"
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 308a657..de22544 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -806,6 +806,7 @@
goto err_priv;
}
+ priv->dai_fmt = (unsigned int) -1;
dai->private_data = priv;
return 0;
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 2f3a21e..df494d1 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -1,10 +1,10 @@
config SND_S3C24XX_SOC
tristate "SoC Audio for the Samsung S3CXXXX chips"
- depends on ARCH_S3C2410 || ARCH_S3C64XX
+ depends on ARCH_S3C2410
help
Say Y or M if you want to add support for codecs attached to
- the S3C24XX and S3C64XX AC97, I2S or SSP interface. You will
- also need to select the audio interfaces to support below.
+ the S3C24XX AC97 or I2S interfaces. You will also need to
+ select the audio interfaces to support below.
config SND_S3C24XX_SOC_I2S
tristate
diff --git a/sound/soc/s3c24xx/jive_wm8750.c b/sound/soc/s3c24xx/jive_wm8750.c
index 3206379..93e6c87 100644
--- a/sound/soc/s3c24xx/jive_wm8750.c
+++ b/sound/soc/s3c24xx/jive_wm8750.c
@@ -69,8 +69,8 @@
break;
}
- s3c_i2sv2_calc_rate(&div, NULL, params_rate(params),
- s3c2412_get_iisclk());
+ s3c_i2sv2_iis_calc_rate(&div, NULL, params_rate(params),
+ s3c2412_get_iisclk());
/* set codec DAI configuration */
ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
@@ -145,8 +145,9 @@
};
/* jive audio machine driver */
-static struct snd_soc_machine snd_soc_machine_jive = {
+static struct snd_soc_card snd_soc_machine_jive = {
.name = "Jive",
+ .platform = &s3c24xx_soc_platform,
.dai_link = &jive_dai,
.num_links = 1,
};
@@ -157,9 +158,8 @@
/* jive audio subsystem */
static struct snd_soc_device jive_snd_devdata = {
- .machine = &snd_soc_machine_jive,
- .platform = &s3c24xx_soc_platform,
- .codec_dev = &soc_codec_dev_wm8750_spi,
+ .card = &snd_soc_machine_jive,
+ .codec_dev = &soc_codec_dev_wm8750,
.codec_data = &jive_wm8750_setup,
};
diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c
index 295a4c9..689ffcd 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.c
+++ b/sound/soc/s3c24xx/s3c-i2s-v2.c
@@ -473,9 +473,9 @@
/* default table of all avaialable root fs divisors */
static unsigned int iis_fs_tab[] = { 256, 512, 384, 768 };
-int s3c2412_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
- unsigned int *fstab,
- unsigned int rate, struct clk *clk)
+int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
+ unsigned int *fstab,
+ unsigned int rate, struct clk *clk)
{
unsigned long clkrate = clk_get_rate(clk);
unsigned int div;
@@ -531,7 +531,7 @@
return 0;
}
-EXPORT_SYMBOL_GPL(s3c2412_iis_calc_rate);
+EXPORT_SYMBOL_GPL(s3c_i2sv2_iis_calc_rate);
int s3c_i2sv2_probe(struct platform_device *pdev,
struct snd_soc_dai *dai,
@@ -624,10 +624,12 @@
int s3c_i2sv2_register_dai(struct snd_soc_dai *dai)
{
- dai->ops.trigger = s3c2412_i2s_trigger;
- dai->ops.hw_params = s3c2412_i2s_hw_params;
- dai->ops.set_fmt = s3c2412_i2s_set_fmt;
- dai->ops.set_clkdiv = s3c2412_i2s_set_clkdiv;
+ struct snd_soc_dai_ops *ops = dai->ops;
+
+ ops->trigger = s3c2412_i2s_trigger;
+ ops->hw_params = s3c2412_i2s_hw_params;
+ ops->set_fmt = s3c2412_i2s_set_fmt;
+ ops->set_clkdiv = s3c2412_i2s_set_clkdiv;
dai->suspend = s3c2412_i2s_suspend;
dai->resume = s3c2412_i2s_resume;
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
index 1ca3cda..b7e0b3f 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/s3c24xx/s3c2412-i2s.c
@@ -33,8 +33,8 @@
#include <plat/regs-s3c2412-iis.h>
-#include <plat/regs-gpio.h>
#include <plat/audio.h>
+#include <mach/regs-gpio.h>
#include <mach/dma.h>
#include "s3c24xx-pcm.h"
diff --git a/sound/usb/caiaq/Makefile b/sound/usb/caiaq/Makefile
index 23dadd5..3889996 100644
--- a/sound/usb/caiaq/Makefile
+++ b/sound/usb/caiaq/Makefile
@@ -1,4 +1,4 @@
-snd-usb-caiaq-y := caiaq-device.o caiaq-audio.o caiaq-midi.o caiaq-control.o
-snd-usb-caiaq-$(CONFIG_SND_USB_CAIAQ_INPUT) += caiaq-input.o
+snd-usb-caiaq-y := device.o audio.o midi.o control.o
+snd-usb-caiaq-$(CONFIG_SND_USB_CAIAQ_INPUT) += input.o
obj-$(CONFIG_SND_USB_CAIAQ) += snd-usb-caiaq.o
diff --git a/sound/usb/caiaq/caiaq-audio.c b/sound/usb/caiaq/audio.c
similarity index 98%
rename from sound/usb/caiaq/caiaq-audio.c
rename to sound/usb/caiaq/audio.c
index 08d51e0..3f45c0f 100644
--- a/sound/usb/caiaq/caiaq-audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -16,20 +16,14 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/interrupt.h>
-#include <linux/usb.h>
#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/usb.h>
#include <sound/core.h>
-#include <sound/initval.h>
#include <sound/pcm.h>
-#include <sound/rawmidi.h>
-#include <linux/input.h>
-#include "caiaq-device.h"
-#include "caiaq-audio.h"
+#include "device.h"
+#include "audio.h"
#define N_URBS 32
#define CLOCK_DRIFT_TOLERANCE 5
diff --git a/sound/usb/caiaq/caiaq-audio.h b/sound/usb/caiaq/audio.h
similarity index 100%
rename from sound/usb/caiaq/caiaq-audio.h
rename to sound/usb/caiaq/audio.h
diff --git a/sound/usb/caiaq/caiaq-control.c b/sound/usb/caiaq/control.c
similarity index 98%
rename from sound/usb/caiaq/caiaq-control.c
rename to sound/usb/caiaq/control.c
index e92c2bb..537102b 100644
--- a/sound/usb/caiaq/caiaq-control.c
+++ b/sound/usb/caiaq/control.c
@@ -18,17 +18,13 @@
*/
#include <linux/init.h>
-#include <linux/interrupt.h>
#include <linux/usb.h>
-#include <sound/core.h>
-#include <sound/initval.h>
-#include <sound/pcm.h>
-#include <sound/rawmidi.h>
#include <sound/control.h>
-#include <linux/input.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
-#include "caiaq-device.h"
-#include "caiaq-control.h"
+#include "device.h"
+#include "control.h"
#define CNT_INTVAL 0x10000
diff --git a/sound/usb/caiaq/caiaq-control.h b/sound/usb/caiaq/control.h
similarity index 100%
rename from sound/usb/caiaq/caiaq-control.h
rename to sound/usb/caiaq/control.h
diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/device.c
similarity index 97%
rename from sound/usb/caiaq/caiaq-device.c
rename to sound/usb/caiaq/device.c
index cf573a9..6d51770 100644
--- a/sound/usb/caiaq/caiaq-device.c
+++ b/sound/usb/caiaq/device.c
@@ -19,27 +19,20 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/init.h>
-#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/init.h>
#include <linux/usb.h>
-#include <linux/input.h>
-#include <linux/spinlock.h>
-#include <sound/core.h>
#include <sound/initval.h>
+#include <sound/core.h>
#include <sound/pcm.h>
-#include <sound/rawmidi.h>
-#include <sound/control.h>
-#include "caiaq-device.h"
-#include "caiaq-audio.h"
-#include "caiaq-midi.h"
-#include "caiaq-control.h"
-
-#ifdef CONFIG_SND_USB_CAIAQ_INPUT
-#include "caiaq-input.h"
-#endif
+#include "device.h"
+#include "audio.h"
+#include "midi.h"
+#include "control.h"
+#include "input.h"
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
MODULE_DESCRIPTION("caiaq USB audio, version 1.3.13");
diff --git a/sound/usb/caiaq/caiaq-device.h b/sound/usb/caiaq/device.h
similarity index 100%
rename from sound/usb/caiaq/caiaq-device.h
rename to sound/usb/caiaq/device.h
diff --git a/sound/usb/caiaq/caiaq-input.c b/sound/usb/caiaq/input.c
similarity index 97%
rename from sound/usb/caiaq/caiaq-input.c
rename to sound/usb/caiaq/input.c
index f743847..a48d309 100644
--- a/sound/usb/caiaq/caiaq-input.c
+++ b/sound/usb/caiaq/input.c
@@ -17,17 +17,12 @@
*/
#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/input.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
-#include <linux/spinlock.h>
-#include <sound/core.h>
-#include <sound/rawmidi.h>
#include <sound/pcm.h>
-#include "caiaq-device.h"
-#include "caiaq-input.h"
+
+#include "device.h"
+#include "input.h"
static unsigned short keycode_ak1[] = { KEY_C, KEY_B, KEY_A };
static unsigned short keycode_rk2[] = { KEY_1, KEY_2, KEY_3, KEY_4,
diff --git a/sound/usb/caiaq/caiaq-input.h b/sound/usb/caiaq/input.h
similarity index 100%
rename from sound/usb/caiaq/caiaq-input.h
rename to sound/usb/caiaq/input.h
diff --git a/sound/usb/caiaq/caiaq-midi.c b/sound/usb/caiaq/midi.c
similarity index 95%
rename from sound/usb/caiaq/caiaq-midi.c
rename to sound/usb/caiaq/midi.c
index f19fd36..8fa8cd88 100644
--- a/sound/usb/caiaq/caiaq-midi.c
+++ b/sound/usb/caiaq/midi.c
@@ -16,20 +16,13 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/interrupt.h>
#include <linux/usb.h>
-#include <linux/input.h>
-#include <linux/spinlock.h>
-#include <sound/core.h>
#include <sound/rawmidi.h>
+#include <sound/core.h>
#include <sound/pcm.h>
-#include "caiaq-device.h"
-#include "caiaq-midi.h"
-
+#include "device.h"
+#include "midi.h"
static int snd_usb_caiaq_midi_input_open(struct snd_rawmidi_substream *substream)
{
diff --git a/sound/usb/caiaq/caiaq-midi.h b/sound/usb/caiaq/midi.h
similarity index 100%
rename from sound/usb/caiaq/caiaq-midi.h
rename to sound/usb/caiaq/midi.h
diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c
index 98276aa..012ff1f 100644
--- a/sound/usb/usx2y/us122l.c
+++ b/sound/usb/usx2y/us122l.c
@@ -349,14 +349,10 @@
if (cmd != SNDRV_USB_STREAM_IOCTL_SET_PARAMS)
return -ENOTTY;
- cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
- if (!cfg)
- return -ENOMEM;
+ cfg = memdup_user((void *)arg, sizeof(*cfg));
+ if (IS_ERR(cfg))
+ return PTR_ERR(cfg);
- if (copy_from_user(cfg, (void *)arg, sizeof(*cfg))) {
- err = -EFAULT;
- goto free;
- }
if (cfg->version != USB_STREAM_INTERFACE_VERSION) {
err = -ENXIO;
goto free;
diff --git a/sound/usb/usx2y/usX2Yhwdep.c b/sound/usb/usx2y/usX2Yhwdep.c
index 4af8740..f3d8f71 100644
--- a/sound/usb/usx2y/usX2Yhwdep.c
+++ b/sound/usb/usx2y/usX2Yhwdep.c
@@ -203,13 +203,12 @@
if (access_ok(VERIFY_READ, dsp->image, dsp->length)) {
struct usb_device* dev = priv->chip.dev;
- char *buf = kmalloc(dsp->length, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
- if (copy_from_user(buf, dsp->image, dsp->length)) {
- kfree(buf);
- return -EFAULT;
- }
+ char *buf;
+
+ buf = memdup_user(dsp->image, dsp->length);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
err = usb_set_interface(dev, 0, 1);
if (err)
snd_printk(KERN_ERR "usb_set_interface error \n");
