[PATCH] EFI x86: pass firmware call parameters on the stack
When calling into the EFI firmware, the parameters need to be passed on
the stack. The recent change to use -mregparm=3 breaks x86 EFI support.
This patch is needed to allow the new Intel-based Macs to suspend to ram
(efi.get_time is called during the suspend phase).
Signed-off-by: Frederic Riss <frederic.riss@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c
index b92c7f0..8f9c624 100644
--- a/arch/i386/kernel/efi.c
+++ b/arch/i386/kernel/efi.c
@@ -473,6 +473,70 @@
}
/*
+ * Wrap all the virtual calls in a way that forces the parameters on the stack.
+ */
+
+#define efi_call_virt(f, args...) \
+ ((efi_##f##_t __attribute__((regparm(0)))*)efi.systab->runtime->f)(args)
+
+static efi_status_t virt_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc)
+{
+ return efi_call_virt(get_time, tm, tc);
+}
+
+static efi_status_t virt_efi_set_time (efi_time_t *tm)
+{
+ return efi_call_virt(set_time, tm);
+}
+
+static efi_status_t virt_efi_get_wakeup_time (efi_bool_t *enabled,
+ efi_bool_t *pending,
+ efi_time_t *tm)
+{
+ return efi_call_virt(get_wakeup_time, enabled, pending, tm);
+}
+
+static efi_status_t virt_efi_set_wakeup_time (efi_bool_t enabled,
+ efi_time_t *tm)
+{
+ return efi_call_virt(set_wakeup_time, enabled, tm);
+}
+
+static efi_status_t virt_efi_get_variable (efi_char16_t *name,
+ efi_guid_t *vendor, u32 *attr,
+ unsigned long *data_size, void *data)
+{
+ return efi_call_virt(get_variable, name, vendor, attr, data_size, data);
+}
+
+static efi_status_t virt_efi_get_next_variable (unsigned long *name_size,
+ efi_char16_t *name,
+ efi_guid_t *vendor)
+{
+ return efi_call_virt(get_next_variable, name_size, name, vendor);
+}
+
+static efi_status_t virt_efi_set_variable (efi_char16_t *name,
+ efi_guid_t *vendor,
+ unsigned long attr,
+ unsigned long data_size, void *data)
+{
+ return efi_call_virt(set_variable, name, vendor, attr, data_size, data);
+}
+
+static efi_status_t virt_efi_get_next_high_mono_count (u32 *count)
+{
+ return efi_call_virt(get_next_high_mono_count, count);
+}
+
+static void virt_efi_reset_system (int reset_type, efi_status_t status,
+ unsigned long data_size,
+ efi_char16_t *data)
+{
+ efi_call_virt(reset_system, reset_type, status, data_size, data);
+}
+
+/*
* This function will switch the EFI runtime services to virtual mode.
* Essentially, look through the EFI memmap and map every region that
* has the runtime attribute bit set in its memory descriptor and update
@@ -525,22 +589,15 @@
* pointers in the runtime service table to the new virtual addresses.
*/
- efi.get_time = (efi_get_time_t *) efi.systab->runtime->get_time;
- efi.set_time = (efi_set_time_t *) efi.systab->runtime->set_time;
- efi.get_wakeup_time = (efi_get_wakeup_time_t *)
- efi.systab->runtime->get_wakeup_time;
- efi.set_wakeup_time = (efi_set_wakeup_time_t *)
- efi.systab->runtime->set_wakeup_time;
- efi.get_variable = (efi_get_variable_t *)
- efi.systab->runtime->get_variable;
- efi.get_next_variable = (efi_get_next_variable_t *)
- efi.systab->runtime->get_next_variable;
- efi.set_variable = (efi_set_variable_t *)
- efi.systab->runtime->set_variable;
- efi.get_next_high_mono_count = (efi_get_next_high_mono_count_t *)
- efi.systab->runtime->get_next_high_mono_count;
- efi.reset_system = (efi_reset_system_t *)
- efi.systab->runtime->reset_system;
+ efi.get_time = virt_efi_get_time;
+ efi.set_time = virt_efi_set_time;
+ efi.get_wakeup_time = virt_efi_get_wakeup_time;
+ efi.set_wakeup_time = virt_efi_set_wakeup_time;
+ efi.get_variable = virt_efi_get_variable;
+ efi.get_next_variable = virt_efi_get_next_variable;
+ efi.set_variable = virt_efi_set_variable;
+ efi.get_next_high_mono_count = virt_efi_get_next_high_mono_count;
+ efi.reset_system = virt_efi_reset_system;
}
void __init
