serial: mxs-auart: clean get_mctrl and set_mctrl
Russell King:
The only thing which the .get_mctrl method is supposed to do is
to return the state of the /input/ lines, which are CTS, DCD, DSR, RI.
The output line state is stored in port->mctrl, and is added to
the returned value by serial_core when it's required.
RTS output state should not be returned from the .get_mctrl method.
This patch removes ctrl variable from mxs_auart_port
and removes useless reading back RTS line.
The ctrl variable in mxs_auart_port duplicated mctrl,
member of uart_port structure in serial_core.h.
The removed code from mxs_auart_set_mctrl() and mxs_auart_get_mctrl
duplicated uart_update_mctrl() and uart_tiocmget()
in serial_core.c.
Signed-off-by: Janusz Uzycki <j.uzycki@elproma.com.pl>
Reviewed-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 0296c1c..907c3e5 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -143,7 +143,6 @@
#define MXS_AUART_DMA_RX_READY 3 /* bit 3 */
#define MXS_AUART_RTSCTS 4 /* bit 4 */
unsigned long flags;
- unsigned int ctrl;
enum mxs_auart_type devtype;
unsigned int irq;
@@ -406,8 +405,6 @@
static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl)
{
- struct mxs_auart_port *s = to_auart_port(u);
-
u32 ctrl = readl(u->membase + AUART_CTRL2);
ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS);
@@ -418,24 +415,17 @@
ctrl |= AUART_CTRL2_RTS;
}
- s->ctrl = mctrl;
writel(ctrl, u->membase + AUART_CTRL2);
}
static u32 mxs_auart_get_mctrl(struct uart_port *u)
{
- struct mxs_auart_port *s = to_auart_port(u);
u32 stat = readl(u->membase + AUART_STAT);
- int ctrl2 = readl(u->membase + AUART_CTRL2);
- u32 mctrl = s->ctrl;
+ u32 mctrl = 0;
- mctrl &= ~TIOCM_CTS;
if (stat & AUART_STAT_CTS)
mctrl |= TIOCM_CTS;
- if (ctrl2 & AUART_CTRL2_RTS)
- mctrl |= TIOCM_RTS;
-
return mctrl;
}
@@ -1071,8 +1061,6 @@
s->port.type = PORT_IMX;
s->port.dev = s->dev = &pdev->dev;
- s->ctrl = 0;
-
s->irq = platform_get_irq(pdev, 0);
s->port.irq = s->irq;
ret = request_irq(s->irq, mxs_auart_irq_handle, 0, dev_name(&pdev->dev), s);
