| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * sd.c Copyright (C) 1992 Drew Eckhardt |
| * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale |
| * |
| * Linux scsi disk driver |
| * Initial versions: Drew Eckhardt |
| * Subsequent revisions: Eric Youngdale |
| * Modification history: |
| * - Drew Eckhardt <drew@colorado.edu> original |
| * - Eric Youngdale <eric@andante.org> add scatter-gather, multiple |
| * outstanding request, and other enhancements. |
| * Support loadable low-level scsi drivers. |
| * - Jirka Hanika <geo@ff.cuni.cz> support more scsi disks using |
| * eight major numbers. |
| * - Richard Gooch <rgooch@atnf.csiro.au> support devfs. |
| * - Torben Mathiasen <tmm@image.dk> Resource allocation fixes in |
| * sd_init and cleanups. |
| * - Alex Davis <letmein@erols.com> Fix problem where partition info |
| * not being read in sd_open. Fix problem where removable media |
| * could be ejected after sd_open. |
| * - Douglas Gilbert <dgilbert@interlog.com> cleanup for lk 2.5.x |
| * - Badari Pulavarty <pbadari@us.ibm.com>, Matthew Wilcox |
| * <willy@debian.org>, Kurt Garloff <garloff@suse.de>: |
| * Support 32k/1M disks. |
| * |
| * Logging policy (needs CONFIG_SCSI_LOGGING defined): |
| * - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2 |
| * - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1 |
| * - entering sd_ioctl: SCSI_LOG_IOCTL level 1 |
| * - entering other commands: SCSI_LOG_HLQUEUE level 3 |
| * Note: when the logging level is set by the user, it must be greater |
| * than the level indicated above to trigger output. |
| */ |
| |
| #include <linux/bio-integrity.h> |
| #include <linux/module.h> |
| #include <linux/fs.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/bio-integrity.h> |
| #include <linux/hdreg.h> |
| #include <linux/errno.h> |
| #include <linux/idr.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/blkdev.h> |
| #include <linux/blkpg.h> |
| #include <linux/blk-pm.h> |
| #include <linux/delay.h> |
| #include <linux/rw_hint.h> |
| #include <linux/major.h> |
| #include <linux/mutex.h> |
| #include <linux/string_helpers.h> |
| #include <linux/slab.h> |
| #include <linux/sed-opal.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/pr.h> |
| #include <linux/t10-pi.h> |
| #include <linux/uaccess.h> |
| #include <asm/unaligned.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_dbg.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_devinfo.h> |
| #include <scsi/scsi_driver.h> |
| #include <scsi/scsi_eh.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_ioctl.h> |
| #include <scsi/scsicam.h> |
| #include <scsi/scsi_common.h> |
| |
| #include "sd.h" |
| #include "scsi_priv.h" |
| #include "scsi_logging.h" |
| |
| MODULE_AUTHOR("Eric Youngdale"); |
| MODULE_DESCRIPTION("SCSI disk (sd) driver"); |
| MODULE_LICENSE("GPL"); |
| |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR); |
| MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK); |
| MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD); |
| MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC); |
| MODULE_ALIAS_SCSI_DEVICE(TYPE_ZBC); |
| |
| #define SD_MINORS 16 |
| |
| static void sd_config_discard(struct scsi_disk *sdkp, struct queue_limits *lim, |
| unsigned int mode); |
| static void sd_config_write_same(struct scsi_disk *sdkp, |
| struct queue_limits *lim); |
| static int sd_revalidate_disk(struct gendisk *); |
| static void sd_unlock_native_capacity(struct gendisk *disk); |
| static void sd_shutdown(struct device *); |
| static void scsi_disk_release(struct device *cdev); |
| |
| static DEFINE_IDA(sd_index_ida); |
| |
| static mempool_t *sd_page_pool; |
| static struct lock_class_key sd_bio_compl_lkclass; |
| |
| static const char *sd_cache_types[] = { |
| "write through", "none", "write back", |
| "write back, no read (daft)" |
| }; |
| |
| static void sd_set_flush_flag(struct scsi_disk *sdkp, |
| struct queue_limits *lim) |
| { |
| if (sdkp->WCE) { |
| lim->features |= BLK_FEAT_WRITE_CACHE; |
| if (sdkp->DPOFUA) |
| lim->features |= BLK_FEAT_FUA; |
| else |
| lim->features &= ~BLK_FEAT_FUA; |
| } else { |
| lim->features &= ~(BLK_FEAT_WRITE_CACHE | BLK_FEAT_FUA); |
| } |
| } |
| |
| static ssize_t |
| cache_type_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int ct, rcd, wce, sp; |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| struct scsi_device *sdp = sdkp->device; |
| char buffer[64]; |
| char *buffer_data; |
| struct scsi_mode_data data; |
| struct scsi_sense_hdr sshdr; |
| static const char temp[] = "temporary "; |
| int len, ret; |
| |
| if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC) |
| /* no cache control on RBC devices; theoretically they |
| * can do it, but there's probably so many exceptions |
| * it's not worth the risk */ |
| return -EINVAL; |
| |
| if (strncmp(buf, temp, sizeof(temp) - 1) == 0) { |
| buf += sizeof(temp) - 1; |
| sdkp->cache_override = 1; |
| } else { |
| sdkp->cache_override = 0; |
| } |
| |
| ct = sysfs_match_string(sd_cache_types, buf); |
| if (ct < 0) |
| return -EINVAL; |
| |
| rcd = ct & 0x01 ? 1 : 0; |
| wce = (ct & 0x02) && !sdkp->write_prot ? 1 : 0; |
| |
| if (sdkp->cache_override) { |
| struct queue_limits lim; |
| |
| sdkp->WCE = wce; |
| sdkp->RCD = rcd; |
| |
| lim = queue_limits_start_update(sdkp->disk->queue); |
| sd_set_flush_flag(sdkp, &lim); |
| blk_mq_freeze_queue(sdkp->disk->queue); |
| ret = queue_limits_commit_update(sdkp->disk->queue, &lim); |
| blk_mq_unfreeze_queue(sdkp->disk->queue); |
| if (ret) |
| return ret; |
| return count; |
| } |
| |
| if (scsi_mode_sense(sdp, 0x08, 8, 0, buffer, sizeof(buffer), SD_TIMEOUT, |
| sdkp->max_retries, &data, NULL)) |
| return -EINVAL; |
| len = min_t(size_t, sizeof(buffer), data.length - data.header_length - |
| data.block_descriptor_length); |
| buffer_data = buffer + data.header_length + |
| data.block_descriptor_length; |
| buffer_data[2] &= ~0x05; |
| buffer_data[2] |= wce << 2 | rcd; |
| sp = buffer_data[0] & 0x80 ? 1 : 0; |
| buffer_data[0] &= ~0x80; |
| |
| /* |
| * Ensure WP, DPOFUA, and RESERVED fields are cleared in |
| * received mode parameter buffer before doing MODE SELECT. |
| */ |
| data.device_specific = 0; |
| |
| ret = scsi_mode_select(sdp, 1, sp, buffer_data, len, SD_TIMEOUT, |
| sdkp->max_retries, &data, &sshdr); |
| if (ret) { |
| if (ret > 0 && scsi_sense_valid(&sshdr)) |
| sd_print_sense_hdr(sdkp, &sshdr); |
| return -EINVAL; |
| } |
| sd_revalidate_disk(sdkp->disk); |
| return count; |
| } |
| |
| static ssize_t |
| manage_start_stop_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| struct scsi_device *sdp = sdkp->device; |
| |
| return sysfs_emit(buf, "%u\n", |
| sdp->manage_system_start_stop && |
| sdp->manage_runtime_start_stop && |
| sdp->manage_shutdown); |
| } |
| static DEVICE_ATTR_RO(manage_start_stop); |
| |
| static ssize_t |
| manage_system_start_stop_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| struct scsi_device *sdp = sdkp->device; |
| |
| return sysfs_emit(buf, "%u\n", sdp->manage_system_start_stop); |
| } |
| |
| static ssize_t |
| manage_system_start_stop_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| struct scsi_device *sdp = sdkp->device; |
| bool v; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| if (kstrtobool(buf, &v)) |
| return -EINVAL; |
| |
| sdp->manage_system_start_stop = v; |
| |
| return count; |
| } |
| static DEVICE_ATTR_RW(manage_system_start_stop); |
| |
| static ssize_t |
| manage_runtime_start_stop_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| struct scsi_device *sdp = sdkp->device; |
| |
| return sysfs_emit(buf, "%u\n", sdp->manage_runtime_start_stop); |
| } |
| |
| static ssize_t |
| manage_runtime_start_stop_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| struct scsi_device *sdp = sdkp->device; |
| bool v; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| if (kstrtobool(buf, &v)) |
| return -EINVAL; |
| |
| sdp->manage_runtime_start_stop = v; |
| |
| return count; |
| } |
| static DEVICE_ATTR_RW(manage_runtime_start_stop); |
| |
| static ssize_t manage_shutdown_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| struct scsi_device *sdp = sdkp->device; |
| |
| return sysfs_emit(buf, "%u\n", sdp->manage_shutdown); |
| } |
| |
| static ssize_t manage_shutdown_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| struct scsi_device *sdp = sdkp->device; |
| bool v; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| if (kstrtobool(buf, &v)) |
| return -EINVAL; |
| |
| sdp->manage_shutdown = v; |
| |
| return count; |
| } |
| static DEVICE_ATTR_RW(manage_shutdown); |
| |
| static ssize_t |
| allow_restart_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| |
| return sprintf(buf, "%u\n", sdkp->device->allow_restart); |
| } |
| |
| static ssize_t |
| allow_restart_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| bool v; |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| struct scsi_device *sdp = sdkp->device; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC) |
| return -EINVAL; |
| |
| if (kstrtobool(buf, &v)) |
| return -EINVAL; |
| |
| sdp->allow_restart = v; |
| |
| return count; |
| } |
| static DEVICE_ATTR_RW(allow_restart); |
| |
| static ssize_t |
| cache_type_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| int ct = sdkp->RCD + 2*sdkp->WCE; |
| |
| return sprintf(buf, "%s\n", sd_cache_types[ct]); |
| } |
| static DEVICE_ATTR_RW(cache_type); |
| |
| static ssize_t |
| FUA_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| |
| return sprintf(buf, "%u\n", sdkp->DPOFUA); |
| } |
| static DEVICE_ATTR_RO(FUA); |
| |
| static ssize_t |
| protection_type_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| |
| return sprintf(buf, "%u\n", sdkp->protection_type); |
| } |
| |
| static ssize_t |
| protection_type_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| unsigned int val; |
| int err; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| err = kstrtouint(buf, 10, &val); |
| |
| if (err) |
| return err; |
| |
| if (val <= T10_PI_TYPE3_PROTECTION) |
| sdkp->protection_type = val; |
| |
| return count; |
| } |
| static DEVICE_ATTR_RW(protection_type); |
| |
| static ssize_t |
| protection_mode_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| struct scsi_device *sdp = sdkp->device; |
| unsigned int dif, dix; |
| |
| dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type); |
| dix = scsi_host_dix_capable(sdp->host, sdkp->protection_type); |
| |
| if (!dix && scsi_host_dix_capable(sdp->host, T10_PI_TYPE0_PROTECTION)) { |
| dif = 0; |
| dix = 1; |
| } |
| |
| if (!dif && !dix) |
| return sprintf(buf, "none\n"); |
| |
| return sprintf(buf, "%s%u\n", dix ? "dix" : "dif", dif); |
| } |
| static DEVICE_ATTR_RO(protection_mode); |
| |
| static ssize_t |
| app_tag_own_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| |
| return sprintf(buf, "%u\n", sdkp->ATO); |
| } |
| static DEVICE_ATTR_RO(app_tag_own); |
| |
| static ssize_t |
| thin_provisioning_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| |
| return sprintf(buf, "%u\n", sdkp->lbpme); |
| } |
| static DEVICE_ATTR_RO(thin_provisioning); |
| |
| /* sysfs_match_string() requires dense arrays */ |
| static const char *lbp_mode[] = { |
| [SD_LBP_FULL] = "full", |
| [SD_LBP_UNMAP] = "unmap", |
| [SD_LBP_WS16] = "writesame_16", |
| [SD_LBP_WS10] = "writesame_10", |
| [SD_LBP_ZERO] = "writesame_zero", |
| [SD_LBP_DISABLE] = "disabled", |
| }; |
| |
| static ssize_t |
| provisioning_mode_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| |
| return sprintf(buf, "%s\n", lbp_mode[sdkp->provisioning_mode]); |
| } |
| |
| static ssize_t |
| provisioning_mode_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| struct scsi_device *sdp = sdkp->device; |
| struct queue_limits lim; |
| int mode, err; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| if (sdp->type != TYPE_DISK) |
| return -EINVAL; |
| |
| mode = sysfs_match_string(lbp_mode, buf); |
| if (mode < 0) |
| return -EINVAL; |
| |
| lim = queue_limits_start_update(sdkp->disk->queue); |
| sd_config_discard(sdkp, &lim, mode); |
| blk_mq_freeze_queue(sdkp->disk->queue); |
| err = queue_limits_commit_update(sdkp->disk->queue, &lim); |
| blk_mq_unfreeze_queue(sdkp->disk->queue); |
| if (err) |
| return err; |
| return count; |
| } |
| static DEVICE_ATTR_RW(provisioning_mode); |
| |
| /* sysfs_match_string() requires dense arrays */ |
| static const char *zeroing_mode[] = { |
| [SD_ZERO_WRITE] = "write", |
| [SD_ZERO_WS] = "writesame", |
| [SD_ZERO_WS16_UNMAP] = "writesame_16_unmap", |
| [SD_ZERO_WS10_UNMAP] = "writesame_10_unmap", |
| }; |
| |
| static ssize_t |
| zeroing_mode_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| |
| return sprintf(buf, "%s\n", zeroing_mode[sdkp->zeroing_mode]); |
| } |
| |
| static ssize_t |
| zeroing_mode_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| int mode; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| mode = sysfs_match_string(zeroing_mode, buf); |
| if (mode < 0) |
| return -EINVAL; |
| |
| sdkp->zeroing_mode = mode; |
| |
| return count; |
| } |
| static DEVICE_ATTR_RW(zeroing_mode); |
| |
| static ssize_t |
| max_medium_access_timeouts_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| |
| return sprintf(buf, "%u\n", sdkp->max_medium_access_timeouts); |
| } |
| |
| static ssize_t |
| max_medium_access_timeouts_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| int err; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| err = kstrtouint(buf, 10, &sdkp->max_medium_access_timeouts); |
| |
| return err ? err : count; |
| } |
| static DEVICE_ATTR_RW(max_medium_access_timeouts); |
| |
| static ssize_t |
| max_write_same_blocks_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| |
| return sprintf(buf, "%u\n", sdkp->max_ws_blocks); |
| } |
| |
| static ssize_t |
| max_write_same_blocks_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| struct scsi_device *sdp = sdkp->device; |
| struct queue_limits lim; |
| unsigned long max; |
| int err; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC) |
| return -EINVAL; |
| |
| err = kstrtoul(buf, 10, &max); |
| |
| if (err) |
| return err; |
| |
| if (max == 0) |
| sdp->no_write_same = 1; |
| else if (max <= SD_MAX_WS16_BLOCKS) { |
| sdp->no_write_same = 0; |
| sdkp->max_ws_blocks = max; |
| } |
| |
| lim = queue_limits_start_update(sdkp->disk->queue); |
| sd_config_write_same(sdkp, &lim); |
| blk_mq_freeze_queue(sdkp->disk->queue); |
| err = queue_limits_commit_update(sdkp->disk->queue, &lim); |
| blk_mq_unfreeze_queue(sdkp->disk->queue); |
| if (err) |
| return err; |
| return count; |
| } |
| static DEVICE_ATTR_RW(max_write_same_blocks); |
| |
| static ssize_t |
| zoned_cap_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| |
| if (sdkp->device->type == TYPE_ZBC) |
| return sprintf(buf, "host-managed\n"); |
| if (sdkp->zoned == 1) |
| return sprintf(buf, "host-aware\n"); |
| if (sdkp->zoned == 2) |
| return sprintf(buf, "drive-managed\n"); |
| return sprintf(buf, "none\n"); |
| } |
| static DEVICE_ATTR_RO(zoned_cap); |
| |
| static ssize_t |
| max_retries_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| struct scsi_device *sdev = sdkp->device; |
| int retries, err; |
| |
| err = kstrtoint(buf, 10, &retries); |
| if (err) |
| return err; |
| |
| if (retries == SCSI_CMD_RETRIES_NO_LIMIT || retries <= SD_MAX_RETRIES) { |
| sdkp->max_retries = retries; |
| return count; |
| } |
| |
| sdev_printk(KERN_ERR, sdev, "max_retries must be between -1 and %d\n", |
| SD_MAX_RETRIES); |
| return -EINVAL; |
| } |
| |
| static ssize_t |
| max_retries_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct scsi_disk *sdkp = to_scsi_disk(dev); |
| |
| return sprintf(buf, "%d\n", sdkp->max_retries); |
| } |
| |
| static DEVICE_ATTR_RW(max_retries); |
| |
| static struct attribute *sd_disk_attrs[] = { |
| &dev_attr_cache_type.attr, |
| &dev_attr_FUA.attr, |
| &dev_attr_allow_restart.attr, |
| &dev_attr_manage_start_stop.attr, |
| &dev_attr_manage_system_start_stop.attr, |
| &dev_attr_manage_runtime_start_stop.attr, |
| &dev_attr_manage_shutdown.attr, |
| &dev_attr_protection_type.attr, |
| &dev_attr_protection_mode.attr, |
| &dev_attr_app_tag_own.attr, |
| &dev_attr_thin_provisioning.attr, |
| &dev_attr_provisioning_mode.attr, |
| &dev_attr_zeroing_mode.attr, |
| &dev_attr_max_write_same_blocks.attr, |
| &dev_attr_max_medium_access_timeouts.attr, |
| &dev_attr_zoned_cap.attr, |
| &dev_attr_max_retries.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(sd_disk); |
| |
| static struct class sd_disk_class = { |
| .name = "scsi_disk", |
| .dev_release = scsi_disk_release, |
| .dev_groups = sd_disk_groups, |
| }; |
| |
| /* |
| * Don't request a new module, as that could deadlock in multipath |
| * environment. |
| */ |
| static void sd_default_probe(dev_t devt) |
| { |
| } |
| |
| /* |
| * Device no to disk mapping: |
| * |
| * major disc2 disc p1 |
| * |............|.............|....|....| <- dev_t |
| * 31 20 19 8 7 4 3 0 |
| * |
| * Inside a major, we have 16k disks, however mapped non- |
| * contiguously. The first 16 disks are for major0, the next |
| * ones with major1, ... Disk 256 is for major0 again, disk 272 |
| * for major1, ... |
| * As we stay compatible with our numbering scheme, we can reuse |
| * the well-know SCSI majors 8, 65--71, 136--143. |
| */ |
| static int sd_major(int major_idx) |
| { |
| switch (major_idx) { |
| case 0: |
| return SCSI_DISK0_MAJOR; |
| case 1 ... 7: |
| return SCSI_DISK1_MAJOR + major_idx - 1; |
| case 8 ... 15: |
| return SCSI_DISK8_MAJOR + major_idx - 8; |
| default: |
| BUG(); |
| return 0; /* shut up gcc */ |
| } |
| } |
| |
| #ifdef CONFIG_BLK_SED_OPAL |
| static int sd_sec_submit(void *data, u16 spsp, u8 secp, void *buffer, |
| size_t len, bool send) |
| { |
| struct scsi_disk *sdkp = data; |
| struct scsi_device *sdev = sdkp->device; |
| u8 cdb[12] = { 0, }; |
| const struct scsi_exec_args exec_args = { |
| .req_flags = BLK_MQ_REQ_PM, |
| }; |
| int ret; |
| |
| cdb[0] = send ? SECURITY_PROTOCOL_OUT : SECURITY_PROTOCOL_IN; |
| cdb[1] = secp; |
| put_unaligned_be16(spsp, &cdb[2]); |
| put_unaligned_be32(len, &cdb[6]); |
| |
| ret = scsi_execute_cmd(sdev, cdb, send ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN, |
| buffer, len, SD_TIMEOUT, sdkp->max_retries, |
| &exec_args); |
| return ret <= 0 ? ret : -EIO; |
| } |
| #endif /* CONFIG_BLK_SED_OPAL */ |
| |
| /* |
| * Look up the DIX operation based on whether the command is read or |
| * write and whether dix and dif are enabled. |
| */ |
| static unsigned int sd_prot_op(bool write, bool dix, bool dif) |
| { |
| /* Lookup table: bit 2 (write), bit 1 (dix), bit 0 (dif) */ |
| static const unsigned int ops[] = { /* wrt dix dif */ |
| SCSI_PROT_NORMAL, /* 0 0 0 */ |
| SCSI_PROT_READ_STRIP, /* 0 0 1 */ |
| SCSI_PROT_READ_INSERT, /* 0 1 0 */ |
| SCSI_PROT_READ_PASS, /* 0 1 1 */ |
| SCSI_PROT_NORMAL, /* 1 0 0 */ |
| SCSI_PROT_WRITE_INSERT, /* 1 0 1 */ |
| SCSI_PROT_WRITE_STRIP, /* 1 1 0 */ |
| SCSI_PROT_WRITE_PASS, /* 1 1 1 */ |
| }; |
| |
| return ops[write << 2 | dix << 1 | dif]; |
| } |
| |
| /* |
| * Returns a mask of the protection flags that are valid for a given DIX |
| * operation. |
| */ |
| static unsigned int sd_prot_flag_mask(unsigned int prot_op) |
| { |
| static const unsigned int flag_mask[] = { |
| [SCSI_PROT_NORMAL] = 0, |
| |
| [SCSI_PROT_READ_STRIP] = SCSI_PROT_TRANSFER_PI | |
| SCSI_PROT_GUARD_CHECK | |
| SCSI_PROT_REF_CHECK | |
| SCSI_PROT_REF_INCREMENT, |
| |
| [SCSI_PROT_READ_INSERT] = SCSI_PROT_REF_INCREMENT | |
| SCSI_PROT_IP_CHECKSUM, |
| |
| [SCSI_PROT_READ_PASS] = SCSI_PROT_TRANSFER_PI | |
| SCSI_PROT_GUARD_CHECK | |
| SCSI_PROT_REF_CHECK | |
| SCSI_PROT_REF_INCREMENT | |
| SCSI_PROT_IP_CHECKSUM, |
| |
| [SCSI_PROT_WRITE_INSERT] = SCSI_PROT_TRANSFER_PI | |
| SCSI_PROT_REF_INCREMENT, |
| |
| [SCSI_PROT_WRITE_STRIP] = SCSI_PROT_GUARD_CHECK | |
| SCSI_PROT_REF_CHECK | |
| SCSI_PROT_REF_INCREMENT | |
| SCSI_PROT_IP_CHECKSUM, |
| |
| [SCSI_PROT_WRITE_PASS] = SCSI_PROT_TRANSFER_PI | |
| SCSI_PROT_GUARD_CHECK | |
| SCSI_PROT_REF_CHECK | |
| SCSI_PROT_REF_INCREMENT | |
| SCSI_PROT_IP_CHECKSUM, |
| }; |
| |
| return flag_mask[prot_op]; |
| } |
| |
| static unsigned char sd_setup_protect_cmnd(struct scsi_cmnd *scmd, |
| unsigned int dix, unsigned int dif) |
| { |
| struct request *rq = scsi_cmd_to_rq(scmd); |
| struct bio *bio = rq->bio; |
| unsigned int prot_op = sd_prot_op(rq_data_dir(rq), dix, dif); |
| unsigned int protect = 0; |
| |
| if (dix) { /* DIX Type 0, 1, 2, 3 */ |
| if (bio_integrity_flagged(bio, BIP_IP_CHECKSUM)) |
| scmd->prot_flags |= SCSI_PROT_IP_CHECKSUM; |
| |
| if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false) |
| scmd->prot_flags |= SCSI_PROT_GUARD_CHECK; |
| } |
| |
| if (dif != T10_PI_TYPE3_PROTECTION) { /* DIX/DIF Type 0, 1, 2 */ |
| scmd->prot_flags |= SCSI_PROT_REF_INCREMENT; |
| |
| if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false) |
| scmd->prot_flags |= SCSI_PROT_REF_CHECK; |
| } |
| |
| if (dif) { /* DIX/DIF Type 1, 2, 3 */ |
| scmd->prot_flags |= SCSI_PROT_TRANSFER_PI; |
| |
| if (bio_integrity_flagged(bio, BIP_DISK_NOCHECK)) |
| protect = 3 << 5; /* Disable target PI checking */ |
| else |
| protect = 1 << 5; /* Enable target PI checking */ |
| } |
| |
| scsi_set_prot_op(scmd, prot_op); |
| scsi_set_prot_type(scmd, dif); |
| scmd->prot_flags &= sd_prot_flag_mask(prot_op); |
| |
| return protect; |
| } |
| |
| static void sd_disable_discard(struct scsi_disk *sdkp) |
| { |
| sdkp->provisioning_mode = SD_LBP_DISABLE; |
| blk_queue_disable_discard(sdkp->disk->queue); |
| } |
| |
| static void sd_config_discard(struct scsi_disk *sdkp, struct queue_limits *lim, |
| unsigned int mode) |
| { |
| unsigned int logical_block_size = sdkp->device->sector_size; |
| unsigned int max_blocks = 0; |
| |
| lim->discard_alignment = sdkp->unmap_alignment * logical_block_size; |
| lim->discard_granularity = max(sdkp->physical_block_size, |
| sdkp->unmap_granularity * logical_block_size); |
| sdkp->provisioning_mode = mode; |
| |
| switch (mode) { |
| |
| case SD_LBP_FULL: |
| case SD_LBP_DISABLE: |
| break; |
| |
| case SD_LBP_UNMAP: |
| max_blocks = min_not_zero(sdkp->max_unmap_blocks, |
| (u32)SD_MAX_WS16_BLOCKS); |
| break; |
| |
| case SD_LBP_WS16: |
| if (sdkp->device->unmap_limit_for_ws) |
| max_blocks = sdkp->max_unmap_blocks; |
| else |
| max_blocks = sdkp->max_ws_blocks; |
| |
| max_blocks = min_not_zero(max_blocks, (u32)SD_MAX_WS16_BLOCKS); |
| break; |
| |
| case SD_LBP_WS10: |
| if (sdkp->device->unmap_limit_for_ws) |
| max_blocks = sdkp->max_unmap_blocks; |
| else |
| max_blocks = sdkp->max_ws_blocks; |
| |
| max_blocks = min_not_zero(max_blocks, (u32)SD_MAX_WS10_BLOCKS); |
| break; |
| |
| case SD_LBP_ZERO: |
| max_blocks = min_not_zero(sdkp->max_ws_blocks, |
| (u32)SD_MAX_WS10_BLOCKS); |
| break; |
| } |
| |
| lim->max_hw_discard_sectors = max_blocks * |
| (logical_block_size >> SECTOR_SHIFT); |
| } |
| |
| static void *sd_set_special_bvec(struct request *rq, unsigned int data_len) |
| { |
| struct page *page; |
| |
| page = mempool_alloc(sd_page_pool, GFP_ATOMIC); |
| if (!page) |
| return NULL; |
| clear_highpage(page); |
| bvec_set_page(&rq->special_vec, page, data_len, 0); |
| rq->rq_flags |= RQF_SPECIAL_PAYLOAD; |
| return bvec_virt(&rq->special_vec); |
| } |
| |
| static blk_status_t sd_setup_unmap_cmnd(struct scsi_cmnd *cmd) |
| { |
| struct scsi_device *sdp = cmd->device; |
| struct request *rq = scsi_cmd_to_rq(cmd); |
| struct scsi_disk *sdkp = scsi_disk(rq->q->disk); |
| u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq)); |
| u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq)); |
| unsigned int data_len = 24; |
| char *buf; |
| |
| buf = sd_set_special_bvec(rq, data_len); |
| if (!buf) |
| return BLK_STS_RESOURCE; |
| |
| cmd->cmd_len = 10; |
| cmd->cmnd[0] = UNMAP; |
| cmd->cmnd[8] = 24; |
| |
| put_unaligned_be16(6 + 16, &buf[0]); |
| put_unaligned_be16(16, &buf[2]); |
| put_unaligned_be64(lba, &buf[8]); |
| put_unaligned_be32(nr_blocks, &buf[16]); |
| |
| cmd->allowed = sdkp->max_retries; |
| cmd->transfersize = data_len; |
| rq->timeout = SD_TIMEOUT; |
| |
| return scsi_alloc_sgtables(cmd); |
| } |
| |
| static void sd_config_atomic(struct scsi_disk *sdkp, struct queue_limits *lim) |
| { |
| unsigned int logical_block_size = sdkp->device->sector_size, |
| physical_block_size_sectors, max_atomic, unit_min, unit_max; |
| |
| if ((!sdkp->max_atomic && !sdkp->max_atomic_with_boundary) || |
| sdkp->protection_type == T10_PI_TYPE2_PROTECTION) |
| return; |
| |
| physical_block_size_sectors = sdkp->physical_block_size / |
| sdkp->device->sector_size; |
| |
| unit_min = rounddown_pow_of_two(sdkp->atomic_granularity ? |
| sdkp->atomic_granularity : |
| physical_block_size_sectors); |
| |
| /* |
| * Only use atomic boundary when we have the odd scenario of |
| * sdkp->max_atomic == 0, which the spec does permit. |
| */ |
| if (sdkp->max_atomic) { |
| max_atomic = sdkp->max_atomic; |
| unit_max = rounddown_pow_of_two(sdkp->max_atomic); |
| sdkp->use_atomic_write_boundary = 0; |
| } else { |
| max_atomic = sdkp->max_atomic_with_boundary; |
| unit_max = rounddown_pow_of_two(sdkp->max_atomic_boundary); |
| sdkp->use_atomic_write_boundary = 1; |
| } |
| |
| /* |
| * Ensure compliance with granularity and alignment. For now, keep it |
| * simple and just don't support atomic writes for values mismatched |
| * with max_{boundary}atomic, physical block size, and |
| * atomic_granularity itself. |
| * |
| * We're really being distrustful by checking unit_max also... |
| */ |
| if (sdkp->atomic_granularity > 1) { |
| if (unit_min > 1 && unit_min % sdkp->atomic_granularity) |
| return; |
| if (unit_max > 1 && unit_max % sdkp->atomic_granularity) |
| return; |
| } |
| |
| if (sdkp->atomic_alignment > 1) { |
| if (unit_min > 1 && unit_min % sdkp->atomic_alignment) |
| return; |
| if (unit_max > 1 && unit_max % sdkp->atomic_alignment) |
| return; |
| } |
| |
| lim->atomic_write_hw_max = max_atomic * logical_block_size; |
| lim->atomic_write_hw_boundary = 0; |
| lim->atomic_write_hw_unit_min = unit_min * logical_block_size; |
| lim->atomic_write_hw_unit_max = unit_max * logical_block_size; |
| } |
| |
| static blk_status_t sd_setup_write_same16_cmnd(struct scsi_cmnd *cmd, |
| bool unmap) |
| { |
| struct scsi_device *sdp = cmd->device; |
| struct request *rq = scsi_cmd_to_rq(cmd); |
| struct scsi_disk *sdkp = scsi_disk(rq->q->disk); |
| u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq)); |
| u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq)); |
| u32 data_len = sdp->sector_size; |
| |
| if (!sd_set_special_bvec(rq, data_len)) |
| return BLK_STS_RESOURCE; |
| |
| cmd->cmd_len = 16; |
| cmd->cmnd[0] = WRITE_SAME_16; |
| if (unmap) |
| cmd->cmnd[1] = 0x8; /* UNMAP */ |
| put_unaligned_be64(lba, &cmd->cmnd[2]); |
| put_unaligned_be32(nr_blocks, &cmd->cmnd[10]); |
| |
| cmd->allowed = sdkp->max_retries; |
| cmd->transfersize = data_len; |
| rq->timeout = unmap ? SD_TIMEOUT : SD_WRITE_SAME_TIMEOUT; |
| |
| return scsi_alloc_sgtables(cmd); |
| } |
| |
| static blk_status_t sd_setup_write_same10_cmnd(struct scsi_cmnd *cmd, |
| bool unmap) |
| { |
| struct scsi_device *sdp = cmd->device; |
| struct request *rq = scsi_cmd_to_rq(cmd); |
| struct scsi_disk *sdkp = scsi_disk(rq->q->disk); |
| u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq)); |
| u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq)); |
| u32 data_len = sdp->sector_size; |
| |
| if (!sd_set_special_bvec(rq, data_len)) |
| return BLK_STS_RESOURCE; |
| |
| cmd->cmd_len = 10; |
| cmd->cmnd[0] = WRITE_SAME; |
| if (unmap) |
| cmd->cmnd[1] = 0x8; /* UNMAP */ |
| put_unaligned_be32(lba, &cmd->cmnd[2]); |
| put_unaligned_be16(nr_blocks, &cmd->cmnd[7]); |
| |
| cmd->allowed = sdkp->max_retries; |
| cmd->transfersize = data_len; |
| rq->timeout = unmap ? SD_TIMEOUT : SD_WRITE_SAME_TIMEOUT; |
| |
| return scsi_alloc_sgtables(cmd); |
| } |
| |
| static blk_status_t sd_setup_write_zeroes_cmnd(struct scsi_cmnd *cmd) |
| { |
| struct request *rq = scsi_cmd_to_rq(cmd); |
| struct scsi_device *sdp = cmd->device; |
| struct scsi_disk *sdkp = scsi_disk(rq->q->disk); |
| u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq)); |
| u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq)); |
| |
| if (!(rq->cmd_flags & REQ_NOUNMAP)) { |
| switch (sdkp->zeroing_mode) { |
| case SD_ZERO_WS16_UNMAP: |
| return sd_setup_write_same16_cmnd(cmd, true); |
| case SD_ZERO_WS10_UNMAP: |
| return sd_setup_write_same10_cmnd(cmd, true); |
| } |
| } |
| |
| if (sdp->no_write_same) { |
| rq->rq_flags |= RQF_QUIET; |
| return BLK_STS_TARGET; |
| } |
| |
| if (sdkp->ws16 || lba > 0xffffffff || nr_blocks > 0xffff) |
| return sd_setup_write_same16_cmnd(cmd, false); |
| |
| return sd_setup_write_same10_cmnd(cmd, false); |
| } |
| |
| static void sd_disable_write_same(struct scsi_disk *sdkp) |
| { |
| sdkp->device->no_write_same = 1; |
| sdkp->max_ws_blocks = 0; |
| blk_queue_disable_write_zeroes(sdkp->disk->queue); |
| } |
| |
| static void sd_config_write_same(struct scsi_disk *sdkp, |
| struct queue_limits *lim) |
| { |
| unsigned int logical_block_size = sdkp->device->sector_size; |
| |
| if (sdkp->device->no_write_same) { |
| sdkp->max_ws_blocks = 0; |
| goto out; |
| } |
| |
| /* Some devices can not handle block counts above 0xffff despite |
| * supporting WRITE SAME(16). Consequently we default to 64k |
| * blocks per I/O unless the device explicitly advertises a |
| * bigger limit. |
| */ |
| if (sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS) |
| sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks, |
| (u32)SD_MAX_WS16_BLOCKS); |
| else if (sdkp->ws16 || sdkp->ws10 || sdkp->device->no_report_opcodes) |
| sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks, |
| (u32)SD_MAX_WS10_BLOCKS); |
| else { |
| sdkp->device->no_write_same = 1; |
| sdkp->max_ws_blocks = 0; |
| } |
| |
| if (sdkp->lbprz && sdkp->lbpws) |
| sdkp->zeroing_mode = SD_ZERO_WS16_UNMAP; |
| else if (sdkp->lbprz && sdkp->lbpws10) |
| sdkp->zeroing_mode = SD_ZERO_WS10_UNMAP; |
| else if (sdkp->max_ws_blocks) |
| sdkp->zeroing_mode = SD_ZERO_WS; |
| else |
| sdkp->zeroing_mode = SD_ZERO_WRITE; |
| |
| if (sdkp->max_ws_blocks && |
| sdkp->physical_block_size > logical_block_size) { |
| /* |
| * Reporting a maximum number of blocks that is not aligned |
| * on the device physical size would cause a large write same |
| * request to be split into physically unaligned chunks by |
| * __blkdev_issue_write_zeroes() even if the caller of this |
| * functions took care to align the large request. So make sure |
| * the maximum reported is aligned to the device physical block |
| * size. This is only an optional optimization for regular |
| * disks, but this is mandatory to avoid failure of large write |
| * same requests directed at sequential write required zones of |
| * host-managed ZBC disks. |
| */ |
| sdkp->max_ws_blocks = |
| round_down(sdkp->max_ws_blocks, |
| bytes_to_logical(sdkp->device, |
| sdkp->physical_block_size)); |
| } |
| |
| out: |
| lim->max_write_zeroes_sectors = |
| sdkp->max_ws_blocks * (logical_block_size >> SECTOR_SHIFT); |
| } |
| |
| static blk_status_t sd_setup_flush_cmnd(struct scsi_cmnd *cmd) |
| { |
| struct request *rq = scsi_cmd_to_rq(cmd); |
| struct scsi_disk *sdkp = scsi_disk(rq->q->disk); |
| |
| /* flush requests don't perform I/O, zero the S/G table */ |
| memset(&cmd->sdb, 0, sizeof(cmd->sdb)); |
| |
| if (cmd->device->use_16_for_sync) { |
| cmd->cmnd[0] = SYNCHRONIZE_CACHE_16; |
| cmd->cmd_len = 16; |
| } else { |
| cmd->cmnd[0] = SYNCHRONIZE_CACHE; |
| cmd->cmd_len = 10; |
| } |
| cmd->transfersize = 0; |
| cmd->allowed = sdkp->max_retries; |
| |
| rq->timeout = rq->q->rq_timeout * SD_FLUSH_TIMEOUT_MULTIPLIER; |
| return BLK_STS_OK; |
| } |
| |
| /** |
| * sd_group_number() - Compute the GROUP NUMBER field |
| * @cmd: SCSI command for which to compute the value of the six-bit GROUP NUMBER |
| * field. |
| * |
| * From SBC-5 r05 (https://www.t10.org/cgi-bin/ac.pl?t=f&f=sbc5r05.pdf): |
| * 0: no relative lifetime. |
| * 1: shortest relative lifetime. |
| * 2: second shortest relative lifetime. |
| * 3 - 0x3d: intermediate relative lifetimes. |
| * 0x3e: second longest relative lifetime. |
| * 0x3f: longest relative lifetime. |
| */ |
| static u8 sd_group_number(struct scsi_cmnd *cmd) |
| { |
| const struct request *rq = scsi_cmd_to_rq(cmd); |
| struct scsi_disk *sdkp = scsi_disk(rq->q->disk); |
| |
| if (!sdkp->rscs) |
| return 0; |
| |
| return min3((u32)rq->write_hint, (u32)sdkp->permanent_stream_count, |
| 0x3fu); |
| } |
| |
| static blk_status_t sd_setup_rw32_cmnd(struct scsi_cmnd *cmd, bool write, |
| sector_t lba, unsigned int nr_blocks, |
| unsigned char flags, unsigned int dld) |
| { |
| cmd->cmd_len = SD_EXT_CDB_SIZE; |
| cmd->cmnd[0] = VARIABLE_LENGTH_CMD; |
| cmd->cmnd[6] = sd_group_number(cmd); |
| cmd->cmnd[7] = 0x18; /* Additional CDB len */ |
| cmd->cmnd[9] = write ? WRITE_32 : READ_32; |
| cmd->cmnd[10] = flags; |
| cmd->cmnd[11] = dld & 0x07; |
| put_unaligned_be64(lba, &cmd->cmnd[12]); |
| put_unaligned_be32(lba, &cmd->cmnd[20]); /* Expected Indirect LBA */ |
| put_unaligned_be32(nr_blocks, &cmd->cmnd[28]); |
| |
| return BLK_STS_OK; |
| } |
| |
| static blk_status_t sd_setup_rw16_cmnd(struct scsi_cmnd *cmd, bool write, |
| sector_t lba, unsigned int nr_blocks, |
| unsigned char flags, unsigned int dld) |
| { |
| cmd->cmd_len = 16; |
| cmd->cmnd[0] = write ? WRITE_16 : READ_16; |
| cmd->cmnd[1] = flags | ((dld >> 2) & 0x01); |
| cmd->cmnd[14] = ((dld & 0x03) << 6) | sd_group_number(cmd); |
| cmd->cmnd[15] = 0; |
| put_unaligned_be64(lba, &cmd->cmnd[2]); |
| put_unaligned_be32(nr_blocks, &cmd->cmnd[10]); |
| |
| return BLK_STS_OK; |
| } |
| |
| static blk_status_t sd_setup_rw10_cmnd(struct scsi_cmnd *cmd, bool write, |
| sector_t lba, unsigned int nr_blocks, |
| unsigned char flags) |
| { |
| cmd->cmd_len = 10; |
| cmd->cmnd[0] = write ? WRITE_10 : READ_10; |
| cmd->cmnd[1] = flags; |
| cmd->cmnd[6] = sd_group_number(cmd); |
| cmd->cmnd[9] = 0; |
| put_unaligned_be32(lba, &cmd->cmnd[2]); |
| put_unaligned_be16(nr_blocks, &cmd->cmnd[7]); |
| |
| return BLK_STS_OK; |
| } |
| |
| static blk_status_t sd_setup_rw6_cmnd(struct scsi_cmnd *cmd, bool write, |
| sector_t lba, unsigned int nr_blocks, |
| unsigned char flags) |
| { |
| /* Avoid that 0 blocks gets translated into 256 blocks. */ |
| if (WARN_ON_ONCE(nr_blocks == 0)) |
| return BLK_STS_IOERR; |
| |
| if (unlikely(flags & 0x8)) { |
| /* |
| * This happens only if this drive failed 10byte rw |
| * command with ILLEGAL_REQUEST during operation and |
| * thus turned off use_10_for_rw. |
| */ |
| scmd_printk(KERN_ERR, cmd, "FUA write on READ/WRITE(6) drive\n"); |
| return BLK_STS_IOERR; |
| } |
| |
| cmd->cmd_len = 6; |
| cmd->cmnd[0] = write ? WRITE_6 : READ_6; |
| cmd->cmnd[1] = (lba >> 16) & 0x1f; |
| cmd->cmnd[2] = (lba >> 8) & 0xff; |
| cmd->cmnd[3] = lba & 0xff; |
| cmd->cmnd[4] = nr_blocks; |
| cmd->cmnd[5] = 0; |
| |
| return BLK_STS_OK; |
| } |
| |
| /* |
| * Check if a command has a duration limit set. If it does, and the target |
| * device supports CDL and the feature is enabled, return the limit |
| * descriptor index to use. Return 0 (no limit) otherwise. |
| */ |
| static int sd_cdl_dld(struct scsi_disk *sdkp, struct scsi_cmnd *scmd) |
| { |
| struct scsi_device *sdp = sdkp->device; |
| int hint; |
| |
| if (!sdp->cdl_supported || !sdp->cdl_enable) |
| return 0; |
| |
| /* |
| * Use "no limit" if the request ioprio does not specify a duration |
| * limit hint. |
| */ |
| hint = IOPRIO_PRIO_HINT(req_get_ioprio(scsi_cmd_to_rq(scmd))); |
| if (hint < IOPRIO_HINT_DEV_DURATION_LIMIT_1 || |
| hint > IOPRIO_HINT_DEV_DURATION_LIMIT_7) |
| return 0; |
| |
| return (hint - IOPRIO_HINT_DEV_DURATION_LIMIT_1) + 1; |
| } |
| |
| static blk_status_t sd_setup_atomic_cmnd(struct scsi_cmnd *cmd, |
| sector_t lba, unsigned int nr_blocks, |
| bool boundary, unsigned char flags) |
| { |
| cmd->cmd_len = 16; |
| cmd->cmnd[0] = WRITE_ATOMIC_16; |
| cmd->cmnd[1] = flags; |
| put_unaligned_be64(lba, &cmd->cmnd[2]); |
| put_unaligned_be16(nr_blocks, &cmd->cmnd[12]); |
| if (boundary) |
| put_unaligned_be16(nr_blocks, &cmd->cmnd[10]); |
| else |
| put_unaligned_be16(0, &cmd->cmnd[10]); |
| put_unaligned_be16(nr_blocks, &cmd->cmnd[12]); |
| cmd->cmnd[14] = 0; |
| cmd->cmnd[15] = 0; |
| |
| return BLK_STS_OK; |
| } |
| |
| static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd) |
| { |
| struct request *rq = scsi_cmd_to_rq(cmd); |
| struct scsi_device *sdp = cmd->device; |
| struct scsi_disk *sdkp = scsi_disk(rq->q->disk); |
| sector_t lba = sectors_to_logical(sdp, blk_rq_pos(rq)); |
| sector_t threshold; |
| unsigned int nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq)); |
| unsigned int mask = logical_to_sectors(sdp, 1) - 1; |
| bool write = rq_data_dir(rq) == WRITE; |
| unsigned char protect, fua; |
| unsigned int dld; |
| blk_status_t ret; |
| unsigned int dif; |
| bool dix; |
| |
| ret = scsi_alloc_sgtables(cmd); |
| if (ret != BLK_STS_OK) |
| return ret; |
| |
| ret = BLK_STS_IOERR; |
| if (!scsi_device_online(sdp) || sdp->changed) { |
| scmd_printk(KERN_ERR, cmd, "device offline or changed\n"); |
| goto fail; |
| } |
| |
| if (blk_rq_pos(rq) + blk_rq_sectors(rq) > get_capacity(rq->q->disk)) { |
| scmd_printk(KERN_ERR, cmd, "access beyond end of device\n"); |
| goto fail; |
| } |
| |
| if ((blk_rq_pos(rq) & mask) || (blk_rq_sectors(rq) & mask)) { |
| scmd_printk(KERN_ERR, cmd, "request not aligned to the logical block size\n"); |
| goto fail; |
| } |
| |
| /* |
| * Some SD card readers can't handle accesses which touch the |
| * last one or two logical blocks. Split accesses as needed. |
| */ |
| threshold = sdkp->capacity - SD_LAST_BUGGY_SECTORS; |
| |
| if (unlikely(sdp->last_sector_bug && lba + nr_blocks > threshold)) { |
| if (lba < threshold) { |
| /* Access up to the threshold but not beyond */ |
| nr_blocks = threshold - lba; |
| } else { |
| /* Access only a single logical block */ |
| nr_blocks = 1; |
| } |
| } |
| |
| fua = rq->cmd_flags & REQ_FUA ? 0x8 : 0; |
| dix = scsi_prot_sg_count(cmd); |
| dif = scsi_host_dif_capable(cmd->device->host, sdkp->protection_type); |
| dld = sd_cdl_dld(sdkp, cmd); |
| |
| if (dif || dix) |
| protect = sd_setup_protect_cmnd(cmd, dix, dif); |
| else |
| protect = 0; |
| |
| if (protect && sdkp->protection_type == T10_PI_TYPE2_PROTECTION) { |
| ret = sd_setup_rw32_cmnd(cmd, write, lba, nr_blocks, |
| protect | fua, dld); |
| } else if (rq->cmd_flags & REQ_ATOMIC && write) { |
| ret = sd_setup_atomic_cmnd(cmd, lba, nr_blocks, |
| sdkp->use_atomic_write_boundary, |
| protect | fua); |
| } else if (sdp->use_16_for_rw || (nr_blocks > 0xffff)) { |
| ret = sd_setup_rw16_cmnd(cmd, write, lba, nr_blocks, |
| protect | fua, dld); |
| } else if ((nr_blocks > 0xff) || (lba > 0x1fffff) || |
| sdp->use_10_for_rw || protect || rq->write_hint) { |
| ret = sd_setup_rw10_cmnd(cmd, write, lba, nr_blocks, |
| protect | fua); |
| } else { |
| ret = sd_setup_rw6_cmnd(cmd, write, lba, nr_blocks, |
| protect | fua); |
| } |
| |
| if (unlikely(ret != BLK_STS_OK)) |
| goto fail; |
| |
| /* |
| * We shouldn't disconnect in the middle of a sector, so with a dumb |
| * host adapter, it's safe to assume that we can at least transfer |
| * this many bytes between each connect / disconnect. |
| */ |
| cmd->transfersize = sdp->sector_size; |
| cmd->underflow = nr_blocks << 9; |
| cmd->allowed = sdkp->max_retries; |
| cmd->sdb.length = nr_blocks * sdp->sector_size; |
| |
| SCSI_LOG_HLQUEUE(1, |
| scmd_printk(KERN_INFO, cmd, |
| "%s: block=%llu, count=%d\n", __func__, |
| (unsigned long long)blk_rq_pos(rq), |
| blk_rq_sectors(rq))); |
| SCSI_LOG_HLQUEUE(2, |
| scmd_printk(KERN_INFO, cmd, |
| "%s %d/%u 512 byte blocks.\n", |
| write ? "writing" : "reading", nr_blocks, |
| blk_rq_sectors(rq))); |
| |
| /* |
| * This indicates that the command is ready from our end to be queued. |
| */ |
| return BLK_STS_OK; |
| fail: |
| scsi_free_sgtables(cmd); |
| return ret; |
| } |
| |
| static blk_status_t sd_init_command(struct scsi_cmnd *cmd) |
| { |
| struct request *rq = scsi_cmd_to_rq(cmd); |
| |
| switch (req_op(rq)) { |
| case REQ_OP_DISCARD: |
| switch (scsi_disk(rq->q->disk)->provisioning_mode) { |
| case SD_LBP_UNMAP: |
| return sd_setup_unmap_cmnd(cmd); |
| case SD_LBP_WS16: |
| return sd_setup_write_same16_cmnd(cmd, true); |
| case SD_LBP_WS10: |
| return sd_setup_write_same10_cmnd(cmd, true); |
| case SD_LBP_ZERO: |
| return sd_setup_write_same10_cmnd(cmd, false); |
| default: |
| return BLK_STS_TARGET; |
| } |
| case REQ_OP_WRITE_ZEROES: |
| return sd_setup_write_zeroes_cmnd(cmd); |
| case REQ_OP_FLUSH: |
| return sd_setup_flush_cmnd(cmd); |
| case REQ_OP_READ: |
| case REQ_OP_WRITE: |
| return sd_setup_read_write_cmnd(cmd); |
| case REQ_OP_ZONE_RESET: |
| return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_RESET_WRITE_POINTER, |
| false); |
| case REQ_OP_ZONE_RESET_ALL: |
| return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_RESET_WRITE_POINTER, |
| true); |
| case REQ_OP_ZONE_OPEN: |
| return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_OPEN_ZONE, false); |
| case REQ_OP_ZONE_CLOSE: |
| return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_CLOSE_ZONE, false); |
| case REQ_OP_ZONE_FINISH: |
| return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_FINISH_ZONE, false); |
| default: |
| WARN_ON_ONCE(1); |
| return BLK_STS_NOTSUPP; |
| } |
| } |
| |
| static void sd_uninit_command(struct scsi_cmnd *SCpnt) |
| { |
| struct request *rq = scsi_cmd_to_rq(SCpnt); |
| |
| if (rq->rq_flags & RQF_SPECIAL_PAYLOAD) |
| mempool_free(rq->special_vec.bv_page, sd_page_pool); |
| } |
| |
| static bool sd_need_revalidate(struct gendisk *disk, struct scsi_disk *sdkp) |
| { |
| if (sdkp->device->removable || sdkp->write_prot) { |
| if (disk_check_media_change(disk)) |
| return true; |
| } |
| |
| /* |
| * Force a full rescan after ioctl(BLKRRPART). While the disk state has |
| * nothing to do with partitions, BLKRRPART is used to force a full |
| * revalidate after things like a format for historical reasons. |
| */ |
| return test_bit(GD_NEED_PART_SCAN, &disk->state); |
| } |
| |
| /** |
| * sd_open - open a scsi disk device |
| * @disk: disk to open |
| * @mode: open mode |
| * |
| * Returns 0 if successful. Returns a negated errno value in case |
| * of error. |
| * |
| * Note: This can be called from a user context (e.g. fsck(1) ) |
| * or from within the kernel (e.g. as a result of a mount(1) ). |
| * In the latter case @inode and @filp carry an abridged amount |
| * of information as noted above. |
| * |
| * Locking: called with disk->open_mutex held. |
| **/ |
| static int sd_open(struct gendisk *disk, blk_mode_t mode) |
| { |
| struct scsi_disk *sdkp = scsi_disk(disk); |
| struct scsi_device *sdev = sdkp->device; |
| int retval; |
| |
| if (scsi_device_get(sdev)) |
| return -ENXIO; |
| |
| SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n")); |
| |
| /* |
| * If the device is in error recovery, wait until it is done. |
| * If the device is offline, then disallow any access to it. |
| */ |
| retval = -ENXIO; |
| if (!scsi_block_when_processing_errors(sdev)) |
| goto error_out; |
| |
| if (sd_need_revalidate(disk, sdkp)) |
| sd_revalidate_disk(disk); |
| |
| /* |
| * If the drive is empty, just let the open fail. |
| */ |
| retval = -ENOMEDIUM; |
| if (sdev->removable && !sdkp->media_present && |
| !(mode & BLK_OPEN_NDELAY)) |
| goto error_out; |
| |
| /* |
| * If the device has the write protect tab set, have the open fail |
| * if the user expects to be able to write to the thing. |
| */ |
| retval = -EROFS; |
| if (sdkp->write_prot && (mode & BLK_OPEN_WRITE)) |
| goto error_out; |
| |
| /* |
| * It is possible that the disk changing stuff resulted in |
| * the device being taken offline. If this is the case, |
| * report this to the user, and don't pretend that the |
| * open actually succeeded. |
| */ |
| retval = -ENXIO; |
| if (!scsi_device_online(sdev)) |
| goto error_out; |
| |
| if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) { |
| if (scsi_block_when_processing_errors(sdev)) |
| scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT); |
| } |
| |
| return 0; |
| |
| error_out: |
| scsi_device_put(sdev); |
| return retval; |
| } |
| |
| /** |
| * sd_release - invoked when the (last) close(2) is called on this |
| * scsi disk. |
| * @disk: disk to release |
| * |
| * Returns 0. |
| * |
| * Note: may block (uninterruptible) if error recovery is underway |
| * on this disk. |
| * |
| * Locking: called with disk->open_mutex held. |
| **/ |
| static void sd_release(struct gendisk *disk) |
| { |
| struct scsi_disk *sdkp = scsi_disk(disk); |
| struct scsi_device *sdev = sdkp->device; |
| |
| SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n")); |
| |
| if (atomic_dec_return(&sdkp->openers) == 0 && sdev->removable) { |
| if (scsi_block_when_processing_errors(sdev)) |
| scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW); |
| } |
| |
| scsi_device_put(sdev); |
| } |
| |
| static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo) |
| { |
| struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk); |
| struct scsi_device *sdp = sdkp->device; |
| struct Scsi_Host *host = sdp->host; |
| sector_t capacity = logical_to_sectors(sdp, sdkp->capacity); |
| int diskinfo[4]; |
| |
| /* default to most commonly used values */ |
| diskinfo[0] = 0x40; /* 1 << 6 */ |
| diskinfo[1] = 0x20; /* 1 << 5 */ |
| diskinfo[2] = capacity >> 11; |
| |
| /* override with calculated, extended default, or driver values */ |
| if (host->hostt->bios_param) |
| host->hostt->bios_param(sdp, bdev, capacity, diskinfo); |
| else |
| scsicam_bios_param(bdev, capacity, diskinfo); |
| |
| geo->heads = diskinfo[0]; |
| geo->sectors = diskinfo[1]; |
| geo->cylinders = diskinfo[2]; |
| return 0; |
| } |
| |
| /** |
| * sd_ioctl - process an ioctl |
| * @bdev: target block device |
| * @mode: open mode |
| * @cmd: ioctl command number |
| * @arg: this is third argument given to ioctl(2) system call. |
| * Often contains a pointer. |
| * |
| * Returns 0 if successful (some ioctls return positive numbers on |
| * success as well). Returns a negated errno value in case of error. |
| * |
| * Note: most ioctls are forward onto the block subsystem or further |
| * down in the scsi subsystem. |
| **/ |
| static int sd_ioctl(struct block_device *bdev, blk_mode_t mode, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct gendisk *disk = bdev->bd_disk; |
| struct scsi_disk *sdkp = scsi_disk(disk); |
| struct scsi_device *sdp = sdkp->device; |
| void __user *p = (void __user *)arg; |
| int error; |
| |
| SCSI_LOG_IOCTL(1, sd_printk(KERN_INFO, sdkp, "sd_ioctl: disk=%s, " |
| "cmd=0x%x\n", disk->disk_name, cmd)); |
| |
| if (bdev_is_partition(bdev) && !capable(CAP_SYS_RAWIO)) |
| return -ENOIOCTLCMD; |
| |
| /* |
| * If we are in the middle of error recovery, don't let anyone |
| * else try and use this device. Also, if error recovery fails, it |
| * may try and take the device offline, in which case all further |
| * access to the device is prohibited. |
| */ |
| error = scsi_ioctl_block_when_processing_errors(sdp, cmd, |
| (mode & BLK_OPEN_NDELAY)); |
| if (error) |
| return error; |
| |
| if (is_sed_ioctl(cmd)) |
| return sed_ioctl(sdkp->opal_dev, cmd, p); |
| return scsi_ioctl(sdp, mode & BLK_OPEN_WRITE, cmd, p); |
| } |
| |
| static void set_media_not_present(struct scsi_disk *sdkp) |
| { |
| if (sdkp->media_present) |
| sdkp->device->changed = 1; |
| |
| if (sdkp->device->removable) { |
| sdkp->media_present = 0; |
| sdkp->capacity = 0; |
| } |
| } |
| |
| static int media_not_present(struct scsi_disk *sdkp, |
| struct scsi_sense_hdr *sshdr) |
| { |
| if (!scsi_sense_valid(sshdr)) |
| return 0; |
| |
| /* not invoked for commands that could return deferred errors */ |
| switch (sshdr->sense_key) { |
| case UNIT_ATTENTION: |
| case NOT_READY: |
| /* medium not present */ |
| if (sshdr->asc == 0x3A) { |
| set_media_not_present(sdkp); |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * sd_check_events - check media events |
| * @disk: kernel device descriptor |
| * @clearing: disk events currently being cleared |
| * |
| * Returns mask of DISK_EVENT_*. |
| * |
| * Note: this function is invoked from the block subsystem. |
| **/ |
| static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing) |
| { |
| struct scsi_disk *sdkp = disk->private_data; |
| struct scsi_device *sdp; |
| int retval; |
| bool disk_changed; |
| |
| if (!sdkp) |
| return 0; |
| |
| sdp = sdkp->device; |
| SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n")); |
| |
| /* |
| * If the device is offline, don't send any commands - just pretend as |
| * if the command failed. If the device ever comes back online, we |
| * can deal with it then. It is only because of unrecoverable errors |
| * that we would ever take a device offline in the first place. |
| */ |
| if (!scsi_device_online(sdp)) { |
| set_media_not_present(sdkp); |
| goto out; |
| } |
| |
| /* |
| * Using TEST_UNIT_READY enables differentiation between drive with |
| * no cartridge loaded - NOT READY, drive with changed cartridge - |
| * UNIT ATTENTION, or with same cartridge - GOOD STATUS. |
| * |
| * Drives that auto spin down. eg iomega jaz 1G, will be started |
| * by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever |
| * sd_revalidate() is called. |
| */ |
| if (scsi_block_when_processing_errors(sdp)) { |
| struct scsi_sense_hdr sshdr = { 0, }; |
| |
| retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, sdkp->max_retries, |
| &sshdr); |
| |
| /* failed to execute TUR, assume media not present */ |
| if (retval < 0 || host_byte(retval)) { |
| set_media_not_present(sdkp); |
| goto out; |
| } |
| |
| if (media_not_present(sdkp, &sshdr)) |
| goto out; |
| } |
| |
| /* |
| * For removable scsi disk we have to recognise the presence |
| * of a disk in the drive. |
| */ |
| if (!sdkp->media_present) |
| sdp->changed = 1; |
| sdkp->media_present = 1; |
| out: |
| /* |
| * sdp->changed is set under the following conditions: |
| * |
| * Medium present state has changed in either direction. |
| * Device has indicated UNIT_ATTENTION. |
| */ |
| disk_changed = sdp->changed; |
| sdp->changed = 0; |
| return disk_changed ? DISK_EVENT_MEDIA_CHANGE : 0; |
| } |
| |
| static int sd_sync_cache(struct scsi_disk *sdkp) |
| { |
| int res; |
| struct scsi_device *sdp = sdkp->device; |
| const int timeout = sdp->request_queue->rq_timeout |
| * SD_FLUSH_TIMEOUT_MULTIPLIER; |
| /* Leave the rest of the command zero to indicate flush everything. */ |
| const unsigned char cmd[16] = { sdp->use_16_for_sync ? |
| SYNCHRONIZE_CACHE_16 : SYNCHRONIZE_CACHE }; |
| struct scsi_sense_hdr sshdr; |
| struct scsi_failure failure_defs[] = { |
| { |
| .allowed = 3, |
| .result = SCMD_FAILURE_RESULT_ANY, |
| }, |
| {} |
| }; |
| struct scsi_failures failures = { |
| .failure_definitions = failure_defs, |
| }; |
| const struct scsi_exec_args exec_args = { |
| .req_flags = BLK_MQ_REQ_PM, |
| .sshdr = &sshdr, |
| .failures = &failures, |
| }; |
| |
| if (!scsi_device_online(sdp)) |
| return -ENODEV; |
| |
| res = scsi_execute_cmd(sdp, cmd, REQ_OP_DRV_IN, NULL, 0, timeout, |
| sdkp->max_retries, &exec_args); |
| if (res) { |
| sd_print_result(sdkp, "Synchronize Cache(10) failed", res); |
| |
| if (res < 0) |
| return res; |
| |
| if (scsi_status_is_check_condition(res) && |
| scsi_sense_valid(&sshdr)) { |
| sd_print_sense_hdr(sdkp, &sshdr); |
| |
| /* we need to evaluate the error return */ |
| if (sshdr.asc == 0x3a || /* medium not present */ |
| sshdr.asc == 0x20 || /* invalid command */ |
| (sshdr.asc == 0x74 && sshdr.ascq == 0x71)) /* drive is password locked */ |
| /* this is no error here */ |
| return 0; |
| |
| /* |
| * If a format is in progress or if the drive does not |
| * support sync, there is not much we can do because |
| * this is called during shutdown or suspend so just |
| * return success so those operations can proceed. |
| */ |
| if ((sshdr.asc == 0x04 && sshdr.ascq == 0x04) || |
| sshdr.sense_key == ILLEGAL_REQUEST) |
| return 0; |
| } |
| |
| switch (host_byte(res)) { |
| /* ignore errors due to racing a disconnection */ |
| case DID_BAD_TARGET: |
| case DID_NO_CONNECT: |
| return 0; |
| /* signal the upper layer it might try again */ |
| case DID_BUS_BUSY: |
| case DID_IMM_RETRY: |
| case DID_REQUEUE: |
| case DID_SOFT_ERROR: |
| return -EBUSY; |
| default: |
| return -EIO; |
| } |
| } |
| return 0; |
| } |
| |
| static void sd_rescan(struct device *dev) |
| { |
| struct scsi_disk *sdkp = dev_get_drvdata(dev); |
| |
| sd_revalidate_disk(sdkp->disk); |
| } |
| |
| static int sd_get_unique_id(struct gendisk *disk, u8 id[16], |
| enum blk_unique_id type) |
| { |
| struct scsi_device *sdev = scsi_disk(disk)->device; |
| const struct scsi_vpd *vpd; |
| const unsigned char *d; |
| int ret = -ENXIO, len; |
| |
| rcu_read_lock(); |
| vpd = rcu_dereference(sdev->vpd_pg83); |
| if (!vpd) |
| goto out_unlock; |
| |
| ret = -EINVAL; |
| for (d = vpd->data + 4; d < vpd->data + vpd->len; d += d[3] + 4) { |
| /* we only care about designators with LU association */ |
| if (((d[1] >> 4) & 0x3) != 0x00) |
| continue; |
| if ((d[1] & 0xf) != type) |
| continue; |
| |
| /* |
| * Only exit early if a 16-byte descriptor was found. Otherwise |
| * keep looking as one with more entropy might still show up. |
| */ |
| len = d[3]; |
| if (len != 8 && len != 12 && len != 16) |
| continue; |
| ret = len; |
| memcpy(id, d + 4, len); |
| if (len == 16) |
| break; |
| } |
| out_unlock: |
| rcu_read_unlock(); |
| return ret; |
| } |
| |
| static int sd_scsi_to_pr_err(struct scsi_sense_hdr *sshdr, int result) |
| { |
| switch (host_byte(result)) { |
| case DID_TRANSPORT_MARGINAL: |
| case DID_TRANSPORT_DISRUPTED: |
| case DID_BUS_BUSY: |
| return PR_STS_RETRY_PATH_FAILURE; |
| case DID_NO_CONNECT: |
| return PR_STS_PATH_FAILED; |
| case DID_TRANSPORT_FAILFAST: |
| return PR_STS_PATH_FAST_FAILED; |
| } |
| |
| switch (status_byte(result)) { |
| case SAM_STAT_RESERVATION_CONFLICT: |
| return PR_STS_RESERVATION_CONFLICT; |
| case SAM_STAT_CHECK_CONDITION: |
| if (!scsi_sense_valid(sshdr)) |
| return PR_STS_IOERR; |
| |
| if (sshdr->sense_key == ILLEGAL_REQUEST && |
| (sshdr->asc == 0x26 || sshdr->asc == 0x24)) |
| return -EINVAL; |
| |
| fallthrough; |
| default: |
| return PR_STS_IOERR; |
| } |
| } |
| |
| static int sd_pr_in_command(struct block_device *bdev, u8 sa, |
| unsigned char *data, int data_len) |
| { |
| struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk); |
| struct scsi_device *sdev = sdkp->device; |
| struct scsi_sense_hdr sshdr; |
| u8 cmd[10] = { PERSISTENT_RESERVE_IN, sa }; |
| struct scsi_failure failure_defs[] = { |
| { |
| .sense = UNIT_ATTENTION, |
| .asc = SCMD_FAILURE_ASC_ANY, |
| .ascq = SCMD_FAILURE_ASCQ_ANY, |
| .allowed = 5, |
| .result = SAM_STAT_CHECK_CONDITION, |
| }, |
| {} |
| }; |
| struct scsi_failures failures = { |
| .failure_definitions = failure_defs, |
| }; |
| const struct scsi_exec_args exec_args = { |
| .sshdr = &sshdr, |
| .failures = &failures, |
| }; |
| int result; |
| |
| put_unaligned_be16(data_len, &cmd[7]); |
| |
| result = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_IN, data, data_len, |
| SD_TIMEOUT, sdkp->max_retries, &exec_args); |
| if (scsi_status_is_check_condition(result) && |
| scsi_sense_valid(&sshdr)) { |
| sdev_printk(KERN_INFO, sdev, "PR command failed: %d\n", result); |
| scsi_print_sense_hdr(sdev, NULL, &sshdr); |
| } |
| |
| if (result <= 0) |
| return result; |
| |
| return sd_scsi_to_pr_err(&sshdr, result); |
| } |
| |
| static int sd_pr_read_keys(struct block_device *bdev, struct pr_keys *keys_info) |
| { |
| int result, i, data_offset, num_copy_keys; |
| u32 num_keys = keys_info->num_keys; |
| int data_len = num_keys * 8 + 8; |
| u8 *data; |
| |
| data = kzalloc(data_len, GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| result = sd_pr_in_command(bdev, READ_KEYS, data, data_len); |
| if (result) |
| goto free_data; |
| |
| keys_info->generation = get_unaligned_be32(&data[0]); |
| keys_info->num_keys = get_unaligned_be32(&data[4]) / 8; |
| |
| data_offset = 8; |
| num_copy_keys = min(num_keys, keys_info->num_keys); |
| |
| for (i = 0; i < num_copy_keys; i++) { |
| keys_info->keys[i] = get_unaligned_be64(&data[data_offset]); |
| data_offset += 8; |
| } |
| |
| free_data: |
| kfree(data); |
| return result; |
| } |
| |
| static int sd_pr_read_reservation(struct block_device *bdev, |
| struct pr_held_reservation *rsv) |
| { |
| struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk); |
| struct scsi_device *sdev = sdkp->device; |
| u8 data[24] = { }; |
| int result, len; |
| |
| result = sd_pr_in_command(bdev, READ_RESERVATION, data, sizeof(data)); |
| if (result) |
| return result; |
| |
| len = get_unaligned_be32(&data[4]); |
| if (!len) |
| return 0; |
| |
| /* Make sure we have at least the key and type */ |
| if (len < 14) { |
| sdev_printk(KERN_INFO, sdev, |
| "READ RESERVATION failed due to short return buffer of %d bytes\n", |
| len); |
| return -EINVAL; |
| } |
| |
| rsv->generation = get_unaligned_be32(&data[0]); |
| rsv->key = get_unaligned_be64(&data[8]); |
| rsv->type = scsi_pr_type_to_block(data[21] & 0x0f); |
| return 0; |
| } |
| |
| static int sd_pr_out_command(struct block_device *bdev, u8 sa, u64 key, |
| u64 sa_key, enum scsi_pr_type type, u8 flags) |
| { |
| struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk); |
| struct scsi_device *sdev = sdkp->device; |
| struct scsi_sense_hdr sshdr; |
| struct scsi_failure failure_defs[] = { |
| { |
| .sense = UNIT_ATTENTION, |
| .asc = SCMD_FAILURE_ASC_ANY, |
| .ascq = SCMD_FAILURE_ASCQ_ANY, |
| .allowed = 5, |
| .result = SAM_STAT_CHECK_CONDITION, |
| }, |
| {} |
| }; |
| struct scsi_failures failures = { |
| .failure_definitions = failure_defs, |
| }; |
| const struct scsi_exec_args exec_args = { |
| .sshdr = &sshdr, |
| .failures = &failures, |
| }; |
| int result; |
| u8 cmd[16] = { 0, }; |
| u8 data[24] = { 0, }; |
| |
| cmd[0] = PERSISTENT_RESERVE_OUT; |
| cmd[1] = sa; |
| cmd[2] = type; |
| put_unaligned_be32(sizeof(data), &cmd[5]); |
| |
| put_unaligned_be64(key, &data[0]); |
| put_unaligned_be64(sa_key, &data[8]); |
| data[20] = flags; |
| |
| result = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_OUT, &data, |
| sizeof(data), SD_TIMEOUT, sdkp->max_retries, |
| &exec_args); |
| |
| if (scsi_status_is_check_condition(result) && |
| scsi_sense_valid(&sshdr)) { |
| sdev_printk(KERN_INFO, sdev, "PR command failed: %d\n", result); |
| scsi_print_sense_hdr(sdev, NULL, &sshdr); |
| } |
| |
| if (result <= 0) |
| return result; |
| |
| return sd_scsi_to_pr_err(&sshdr, result); |
| } |
| |
| static int sd_pr_register(struct block_device *bdev, u64 old_key, u64 new_key, |
| u32 flags) |
| { |
| if (flags & ~PR_FL_IGNORE_KEY) |
| return -EOPNOTSUPP; |
| return sd_pr_out_command(bdev, (flags & PR_FL_IGNORE_KEY) ? 0x06 : 0x00, |
| old_key, new_key, 0, |
| (1 << 0) /* APTPL */); |
| } |
| |
| static int sd_pr_reserve(struct block_device *bdev, u64 key, enum pr_type type, |
| u32 flags) |
| { |
| if (flags) |
| return -EOPNOTSUPP; |
| return sd_pr_out_command(bdev, 0x01, key, 0, |
| block_pr_type_to_scsi(type), 0); |
| } |
| |
| static int sd_pr_release(struct block_device *bdev, u64 key, enum pr_type type) |
| { |
| return sd_pr_out_command(bdev, 0x02, key, 0, |
| block_pr_type_to_scsi(type), 0); |
| } |
| |
| static int sd_pr_preempt(struct block_device *bdev, u64 old_key, u64 new_key, |
| enum pr_type type, bool abort) |
| { |
| return sd_pr_out_command(bdev, abort ? 0x05 : 0x04, old_key, new_key, |
| block_pr_type_to_scsi(type), 0); |
| } |
| |
| static int sd_pr_clear(struct block_device *bdev, u64 key) |
| { |
| return sd_pr_out_command(bdev, 0x03, key, 0, 0, 0); |
| } |
| |
| static const struct pr_ops sd_pr_ops = { |
| .pr_register = sd_pr_register, |
| .pr_reserve = sd_pr_reserve, |
| .pr_release = sd_pr_release, |
| .pr_preempt = sd_pr_preempt, |
| .pr_clear = sd_pr_clear, |
| .pr_read_keys = sd_pr_read_keys, |
| .pr_read_reservation = sd_pr_read_reservation, |
| }; |
| |
| static void scsi_disk_free_disk(struct gendisk *disk) |
| { |
| struct scsi_disk *sdkp = scsi_disk(disk); |
| |
| put_device(&sdkp->disk_dev); |
| } |
| |
| static const struct block_device_operations sd_fops = { |
| .owner = THIS_MODULE, |
| .open = sd_open, |
| .release = sd_release, |
| .ioctl = sd_ioctl, |
| .getgeo = sd_getgeo, |
| .compat_ioctl = blkdev_compat_ptr_ioctl, |
| .check_events = sd_check_events, |
| .unlock_native_capacity = sd_unlock_native_capacity, |
| .report_zones = sd_zbc_report_zones, |
| .get_unique_id = sd_get_unique_id, |
| .free_disk = scsi_disk_free_disk, |
| .pr_ops = &sd_pr_ops, |
| }; |
| |
| /** |
| * sd_eh_reset - reset error handling callback |
| * @scmd: sd-issued command that has failed |
| * |
| * This function is called by the SCSI midlayer before starting |
| * SCSI EH. When counting medium access failures we have to be |
| * careful to register it only only once per device and SCSI EH run; |
| * there might be several timed out commands which will cause the |
| * 'max_medium_access_timeouts' counter to trigger after the first |
| * SCSI EH run already and set the device to offline. |
| * So this function resets the internal counter before starting SCSI EH. |
| **/ |
| static void sd_eh_reset(struct scsi_cmnd *scmd) |
| { |
| struct scsi_disk *sdkp = scsi_disk(scsi_cmd_to_rq(scmd)->q->disk); |
| |
| /* New SCSI EH run, reset gate variable */ |
| sdkp->ignore_medium_access_errors = false; |
| } |
| |
| /** |
| * sd_eh_action - error handling callback |
| * @scmd: sd-issued command that has failed |
| * @eh_disp: The recovery disposition suggested by the midlayer |
| * |
| * This function is called by the SCSI midlayer upon completion of an |
| * error test command (currently TEST UNIT READY). The result of sending |
| * the eh command is passed in eh_disp. We're looking for devices that |
| * fail medium access commands but are OK with non access commands like |
| * test unit ready (so wrongly see the device as having a successful |
| * recovery) |
| **/ |
| static int sd_eh_action(struct scsi_cmnd *scmd, int eh_disp) |
| { |
| struct scsi_disk *sdkp = scsi_disk(scsi_cmd_to_rq(scmd)->q->disk); |
| struct scsi_device *sdev = scmd->device; |
| |
| if (!scsi_device_online(sdev) || |
| !scsi_medium_access_command(scmd) || |
| host_byte(scmd->result) != DID_TIME_OUT || |
| eh_disp != SUCCESS) |
| return eh_disp; |
| |
| /* |
| * The device has timed out executing a medium access command. |
| * However, the TEST UNIT READY command sent during error |
| * handling completed successfully. Either the device is in the |
| * process of recovering or has it suffered an internal failure |
| * that prevents access to the storage medium. |
| */ |
| if (!sdkp->ignore_medium_access_errors) { |
| sdkp->medium_access_timed_out++; |
| sdkp->ignore_medium_access_errors = true; |
| } |
| |
| /* |
| * If the device keeps failing read/write commands but TEST UNIT |
| * READY always completes successfully we assume that medium |
| * access is no longer possible and take the device offline. |
| */ |
| if (sdkp->medium_access_timed_out >= sdkp->max_medium_access_timeouts) { |
| scmd_printk(KERN_ERR, scmd, |
| "Medium access timeout failure. Offlining disk!\n"); |
| mutex_lock(&sdev->state_mutex); |
| scsi_device_set_state(sdev, SDEV_OFFLINE); |
| mutex_unlock(&sdev->state_mutex); |
| |
| return SUCCESS; |
| } |
| |
| return eh_disp; |
| } |
| |
| static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd) |
| { |
| struct request *req = scsi_cmd_to_rq(scmd); |
| struct scsi_device *sdev = scmd->device; |
| unsigned int transferred, good_bytes; |
| u64 start_lba, end_lba, bad_lba; |
| |
| /* |
| * Some commands have a payload smaller than the device logical |
| * block size (e.g. INQUIRY on a 4K disk). |
| */ |
| if (scsi_bufflen(scmd) <= sdev->sector_size) |
| return 0; |
| |
| /* Check if we have a 'bad_lba' information */ |
| if (!scsi_get_sense_info_fld(scmd->sense_buffer, |
| SCSI_SENSE_BUFFERSIZE, |
| &bad_lba)) |
| return 0; |
| |
| /* |
| * If the bad lba was reported incorrectly, we have no idea where |
| * the error is. |
| */ |
| start_lba = sectors_to_logical(sdev, blk_rq_pos(req)); |
| end_lba = start_lba + bytes_to_logical(sdev, scsi_bufflen(scmd)); |
| if (bad_lba < start_lba || bad_lba >= end_lba) |
| return 0; |
| |
| /* |
| * resid is optional but mostly filled in. When it's unused, |
| * its value is zero, so we assume the whole buffer transferred |
| */ |
| transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd); |
| |
| /* This computation should always be done in terms of the |
| * resolution of the device's medium. |
| */ |
| good_bytes = logical_to_bytes(sdev, bad_lba - start_lba); |
| |
| return min(good_bytes, transferred); |
| } |
| |
| /** |
| * sd_done - bottom half handler: called when the lower level |
| * driver has completed (successfully or otherwise) a scsi command. |
| * @SCpnt: mid-level's per command structure. |
| * |
| * Note: potentially run from within an ISR. Must not block. |
| **/ |
| static int sd_done(struct scsi_cmnd *SCpnt) |
| { |
| int result = SCpnt->result; |
| unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt); |
| unsigned int sector_size = SCpnt->device->sector_size; |
| unsigned int resid; |
| struct scsi_sense_hdr sshdr; |
| struct request *req = scsi_cmd_to_rq(SCpnt); |
| struct scsi_disk *sdkp = scsi_disk(req->q->disk); |
| int sense_valid = 0; |
| int sense_deferred = 0; |
| |
| switch (req_op(req)) { |
| case REQ_OP_DISCARD: |
| case REQ_OP_WRITE_ZEROES: |
| case REQ_OP_ZONE_RESET: |
| case REQ_OP_ZONE_RESET_ALL: |
| case REQ_OP_ZONE_OPEN: |
| case REQ_OP_ZONE_CLOSE: |
| case REQ_OP_ZONE_FINISH: |
| if (!result) { |
| good_bytes = blk_rq_bytes(req); |
| scsi_set_resid(SCpnt, 0); |
| } else { |
| good_bytes = 0; |
| scsi_set_resid(SCpnt, blk_rq_bytes(req)); |
| } |
| break; |
| default: |
| /* |
| * In case of bogus fw or device, we could end up having |
| * an unaligned partial completion. Check this here and force |
| * alignment. |
| */ |
| resid = scsi_get_resid(SCpnt); |
| if (resid & (sector_size - 1)) { |
| sd_printk(KERN_INFO, sdkp, |
| "Unaligned partial completion (resid=%u, sector_sz=%u)\n", |
| resid, sector_size); |
| scsi_print_command(SCpnt); |
| resid = min(scsi_bufflen(SCpnt), |
| round_up(resid, sector_size)); |
| scsi_set_resid(SCpnt, resid); |
| } |
| } |
| |
| if (result) { |
| sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr); |
| if (sense_valid) |
| sense_deferred = scsi_sense_is_deferred(&sshdr); |
| } |
| sdkp->medium_access_timed_out = 0; |
| |
| if (!scsi_status_is_check_condition(result) && |
| (!sense_valid || sense_deferred)) |
| goto out; |
| |
| switch (sshdr.sense_key) { |
| case HARDWARE_ERROR: |
| case MEDIUM_ERROR: |
| good_bytes = sd_completed_bytes(SCpnt); |
| break; |
| case RECOVERED_ERROR: |
| good_bytes = scsi_bufflen(SCpnt); |
| break; |
| case NO_SENSE: |
| /* This indicates a false check condition, so ignore it. An |
| * unknown amount of data was transferred so treat it as an |
| * error. |
| */ |
| SCpnt->result = 0; |
| memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); |
| break; |
| case ABORTED_COMMAND: |
| if (sshdr.asc == 0x10) /* DIF: Target detected corruption */ |
| good_bytes = sd_completed_bytes(SCpnt); |
| break; |
| case ILLEGAL_REQUEST: |
| switch (sshdr.asc) { |
| case 0x10: /* DIX: Host detected corruption */ |
| good_bytes = sd_completed_bytes(SCpnt); |
| break; |
| case 0x20: /* INVALID COMMAND OPCODE */ |
| case 0x24: /* INVALID FIELD IN CDB */ |
| switch (SCpnt->cmnd[0]) { |
| case UNMAP: |
| sd_disable_discard(sdkp); |
| break; |
| case WRITE_SAME_16: |
| case WRITE_SAME: |
| if (SCpnt->cmnd[1] & 8) { /* UNMAP */ |
| sd_disable_discard(sdkp); |
| } else { |
| sd_disable_write_same(sdkp); |
| req->rq_flags |= RQF_QUIET; |
| } |
| break; |
| } |
| } |
| break; |
| default: |
| break; |
| } |
| |
| out: |
| if (sdkp->device->type == TYPE_ZBC) |
| good_bytes = sd_zbc_complete(SCpnt, good_bytes, &sshdr); |
| |
| SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt, |
| "sd_done: completed %d of %d bytes\n", |
| good_bytes, scsi_bufflen(SCpnt))); |
| |
| return good_bytes; |
| } |
| |
| /* |
| * spinup disk - called only in sd_revalidate_disk() |
| */ |
| static void |
| sd_spinup_disk(struct scsi_disk *sdkp) |
| { |
| static const u8 cmd[10] = { TEST_UNIT_READY }; |
| unsigned long spintime_expire = 0; |
| int spintime, sense_valid = 0; |
| unsigned int the_result; |
| struct scsi_sense_hdr sshdr; |
| struct scsi_failure failure_defs[] = { |
| /* Do not retry Medium Not Present */ |
| { |
| .sense = UNIT_ATTENTION, |
| .asc = 0x3A, |
| .ascq = SCMD_FAILURE_ASCQ_ANY, |
| .result = SAM_STAT_CHECK_CONDITION, |
| }, |
| { |
| .sense = NOT_READY, |
| .asc = 0x3A, |
| .ascq = SCMD_FAILURE_ASCQ_ANY, |
| .result = SAM_STAT_CHECK_CONDITION, |
| }, |
| /* Retry when scsi_status_is_good would return false 3 times */ |
| { |
| .result = SCMD_FAILURE_STAT_ANY, |
| .allowed = 3, |
| }, |
| {} |
| }; |
| struct scsi_failures failures = { |
| .failure_definitions = failure_defs, |
| }; |
| const struct scsi_exec_args exec_args = { |
| .sshdr = &sshdr, |
| .failures = &failures, |
| }; |
| |
| spintime = 0; |
| |
| /* Spin up drives, as required. Only do this at boot time */ |
| /* Spinup needs to be done for module loads too. */ |
| do { |
| bool media_was_present = sdkp->media_present; |
| |
| scsi_failures_reset_retries(&failures); |
| |
| the_result = scsi_execute_cmd(sdkp->device, cmd, REQ_OP_DRV_IN, |
| NULL, 0, SD_TIMEOUT, |
| sdkp->max_retries, &exec_args); |
| |
| |
| if (the_result > 0) { |
| /* |
| * If the drive has indicated to us that it doesn't |
| * have any media in it, don't bother with any more |
| * polling. |
| */ |
| if (media_not_present(sdkp, &sshdr)) { |
| if (media_was_present) |
| sd_printk(KERN_NOTICE, sdkp, |
| "Media removed, stopped polling\n"); |
| return; |
| } |
| sense_valid = scsi_sense_valid(&sshdr); |
| } |
| |
| if (!scsi_status_is_check_condition(the_result)) { |
| /* no sense, TUR either succeeded or failed |
| * with a status error */ |
| if(!spintime && !scsi_status_is_good(the_result)) { |
| sd_print_result(sdkp, "Test Unit Ready failed", |
| the_result); |
| } |
| break; |
| } |
| |
| /* |
| * The device does not want the automatic start to be issued. |
| */ |
| if (sdkp->device->no_start_on_add) |
| break; |
| |
| if (sense_valid && sshdr.sense_key == NOT_READY) { |
| if (sshdr.asc == 4 && sshdr.ascq == 3) |
| break; /* manual intervention required */ |
| if (sshdr.asc == 4 && sshdr.ascq == 0xb) |
| break; /* standby */ |
| if (sshdr.asc == 4 && sshdr.ascq == 0xc) |
| break; /* unavailable */ |
| if (sshdr.asc == 4 && sshdr.ascq == 0x1b) |
| break; /* sanitize in progress */ |
| if (sshdr.asc == 4 && sshdr.ascq == 0x24) |
| break; /* depopulation in progress */ |
| if (sshdr.asc == 4 && sshdr.ascq == 0x25) |
| break; /* depopulation restoration in progress */ |
| /* |
| * Issue command to spin up drive when not ready |
| */ |
| if (!spintime) { |
| /* Return immediately and start spin cycle */ |
| const u8 start_cmd[10] = { |
| [0] = START_STOP, |
| [1] = 1, |
| [4] = sdkp->device->start_stop_pwr_cond ? |
| 0x11 : 1, |
| }; |
| |
| sd_printk(KERN_NOTICE, sdkp, "Spinning up disk..."); |
| scsi_execute_cmd(sdkp->device, start_cmd, |
| REQ_OP_DRV_IN, NULL, 0, |
| SD_TIMEOUT, sdkp->max_retries, |
| &exec_args); |
| spintime_expire = jiffies + 100 * HZ; |
| spintime = 1; |
| } |
| /* Wait 1 second for next try */ |
| msleep(1000); |
| printk(KERN_CONT "."); |
| |
| /* |
| * Wait for USB flash devices with slow firmware. |
| * Yes, this sense key/ASC combination shouldn't |
| * occur here. It's characteristic of these devices. |
| */ |
| } else if (sense_valid && |
| sshdr.sense_key == UNIT_ATTENTION && |
| sshdr.asc == 0x28) { |
| if (!spintime) { |
| spintime_expire = jiffies + 5 * HZ; |
| spintime = 1; |
| } |
| /* Wait 1 second for next try */ |
| msleep(1000); |
| } else { |
| /* we don't understand the sense code, so it's |
| * probably pointless to loop */ |
| if(!spintime) { |
| sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n"); |
| sd_print_sense_hdr(sdkp, &sshdr); |
| } |
| break; |
| } |
| |
| } while (spintime && time_before_eq(jiffies, spintime_expire)); |
| |
| if (spintime) { |
| if (scsi_status_is_good(the_result)) |
| printk(KERN_CONT "ready\n"); |
| else |
| printk(KERN_CONT "not responding...\n"); |
| } |
| } |
| |
| /* |
| * Determine whether disk supports Data Integrity Field. |
| */ |
| static int sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer) |
| { |
| struct scsi_device *sdp = sdkp->device; |
| u8 type; |
| |
| if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0) { |
| sdkp->protection_type = 0; |
| return 0; |
| } |
| |
| type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */ |
| |
| if (type > T10_PI_TYPE3_PROTECTION) { |
| sd_printk(KERN_ERR, sdkp, "formatted with unsupported" \ |
| " protection type %u. Disabling disk!\n", |
| type); |
| sdkp->protection_type = 0; |
| return -ENODEV; |
| } |
| |
| sdkp->protection_type = type; |
| |
| return 0; |
| } |
| |
| static void sd_config_protection(struct scsi_disk *sdkp, |
| struct queue_limits *lim) |
| { |
| struct scsi_device *sdp = sdkp->device; |
| |
| if (IS_ENABLED(CONFIG_BLK_DEV_INTEGRITY)) |
| sd_dif_config_host(sdkp, lim); |
| |
| if (!sdkp->protection_type) |
| return; |
| |
| if (!scsi_host_dif_capable(sdp->host, sdkp->protection_type)) { |
| sd_first_printk(KERN_NOTICE, sdkp, |
| "Disabling DIF Type %u protection\n", |
| sdkp->protection_type); |
| sdkp->protection_type = 0; |
| } |
| |
| sd_first_printk(KERN_NOTICE, sdkp, "Enabling DIF Type %u protection\n", |
| sdkp->protection_type); |
| } |
| |
| static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp, |
| struct scsi_sense_hdr *sshdr, int sense_valid, |
| int the_result) |
| { |
| if (sense_valid) |
| sd_print_sense_hdr(sdkp, sshdr); |
| else |
| sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n"); |
| |
| /* |
| * Set dirty bit for removable devices if not ready - |
| * sometimes drives will not report this properly. |
| */ |
| if (sdp->removable && |
| sense_valid && sshdr->sense_key == NOT_READY) |
| set_media_not_present(sdkp); |
| |
| /* |
| * We used to set media_present to 0 here to indicate no media |
| * in the drive, but some drives fail read capacity even with |
| * media present, so we can't do that. |
| */ |
| sdkp->capacity = 0; /* unknown mapped to zero - as usual */ |
| } |
| |
| #define RC16_LEN 32 |
| #if RC16_LEN > SD_BUF_SIZE |
| #error RC16_LEN must not be more than SD_BUF_SIZE |
| #endif |
| |
| #define READ_CAPACITY_RETRIES_ON_RESET 10 |
| |
| static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, |
| struct queue_limits *lim, unsigned char *buffer) |
| { |
| unsigned char cmd[16]; |
| struct scsi_sense_hdr sshdr; |
| const struct scsi_exec_args exec_args = { |
| .sshdr = &sshdr, |
| }; |
| int sense_valid = 0; |
| int the_result; |
| int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET; |
| unsigned int alignment; |
| unsigned long long lba; |
| unsigned sector_size; |
| |
| if (sdp->no_read_capacity_16) |
| return -EINVAL; |
| |
| do { |
| memset(cmd, 0, 16); |
| cmd[0] = SERVICE_ACTION_IN_16; |
| cmd[1] = SAI_READ_CAPACITY_16; |
| cmd[13] = RC16_LEN; |
| memset(buffer, 0, RC16_LEN); |
| |
| the_result = scsi_execute_cmd(sdp, cmd, REQ_OP_DRV_IN, |
| buffer, RC16_LEN, SD_TIMEOUT, |
| sdkp->max_retries, &exec_args); |
| if (the_result > 0) { |
| if (media_not_present(sdkp, &sshdr)) |
| return -ENODEV; |
| |
| sense_valid = scsi_sense_valid(&sshdr); |
| if (sense_valid && |
| sshdr.sense_key == ILLEGAL_REQUEST && |
| (sshdr.asc == 0x20 || sshdr.asc == 0x24) && |
| sshdr.ascq == 0x00) |
| /* Invalid Command Operation Code or |
| * Invalid Field in CDB, just retry |
| * silently with RC10 */ |
| return -EINVAL; |
| if (sense_valid && |
| sshdr.sense_key == UNIT_ATTENTION && |
| sshdr.asc == 0x29 && sshdr.ascq == 0x00) |
| /* Device reset might occur several times, |
| * give it one more chance */ |
| if (--reset_retries > 0) |
| continue; |
| } |
| retries--; |
| |
| } while (the_result && retries); |
| |
| if (the_result) { |
| sd_print_result(sdkp, "Read Capacity(16) failed", the_result); |
| read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result); |
| return -EINVAL; |
| } |
| |
| sector_size = get_unaligned_be32(&buffer[8]); |
| lba = get_unaligned_be64(&buffer[0]); |
| |
| if (sd_read_protection_type(sdkp, buffer) < 0) { |
| sdkp->capacity = 0; |
| return -ENODEV; |
| } |
| |
| /* Logical blocks per physical block exponent */ |
| sdkp->physical_block_size = (1 << (buffer[13] & 0xf)) * sector_size; |
| |
| /* RC basis */ |
| sdkp->rc_basis = (buffer[12] >> 4) & 0x3; |
| |
| /* Lowest aligned logical block */ |
| alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size; |
| lim->alignment_offset = alignment; |
| if (alignment && sdkp->first_scan) |
| sd_printk(KERN_NOTICE, sdkp, |
| "physical block alignment offset: %u\n", alignment); |
| |
| if (buffer[14] & 0x80) { /* LBPME */ |
| sdkp->lbpme = 1; |
| |
| if (buffer[14] & 0x40) /* LBPRZ */ |
| sdkp->lbprz = 1; |
| } |
| |
| sdkp->capacity = lba + 1; |
| return sector_size; |
| } |
| |
| static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp, |
| unsigned char *buffer) |
| { |
| static const u8 cmd[10] = { READ_CAPACITY }; |
| struct scsi_sense_hdr sshdr; |
| struct scsi_failure failure_defs[] = { |
| /* Do not retry Medium Not Present */ |
| { |
| .sense = UNIT_ATTENTION, |
| .asc = 0x3A, |
| .result = SAM_STAT_CHECK_CONDITION, |
| }, |
| { |
| .sense = NOT_READY, |
| .asc = 0x3A, |
| .result = SAM_STAT_CHECK_CONDITION, |
| }, |
| /* Device reset might occur several times so retry a lot */ |
| { |
| .sense = UNIT_ATTENTION, |
| .asc = 0x29, |
| .allowed = READ_CAPACITY_RETRIES_ON_RESET, |
| .result = SAM_STAT_CHECK_CONDITION, |
| }, |
| /* Any other error not listed above retry 3 times */ |
| { |
| .result = SCMD_FAILURE_RESULT_ANY, |
| .allowed = 3, |
| }, |
| {} |
| }; |
| struct scsi_failures failures = { |
| .failure_definitions = failure_defs, |
| }; |
| const struct scsi_exec_args exec_args = { |
| .sshdr = &sshdr, |
| .failures = &failures, |
| }; |
| int sense_valid = 0; |
| int the_result; |
| sector_t lba; |
| unsigned sector_size; |
| |
| memset(buffer, 0, 8); |
| |
| the_result = scsi_execute_cmd(sdp, cmd, REQ_OP_DRV_IN, buffer, |
| 8, SD_TIMEOUT, sdkp->max_retries, |
| &exec_args); |
| |
| if (the_result > 0) { |
| sense_valid = scsi_sense_valid(&sshdr); |
| |
| if (media_not_present(sdkp, &sshdr)) |
| return -ENODEV; |
| } |
| |
| if (the_result) { |
| sd_print_result(sdkp, "Read Capacity(10) failed", the_result); |
| read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result); |
| return -EINVAL; |
| } |
| |
| sector_size = get_unaligned_be32(&buffer[4]); |
| lba = get_unaligned_be32(&buffer[0]); |
| |
| if (sdp->no_read_capacity_16 && (lba == 0xffffffff)) { |
| /* Some buggy (usb cardreader) devices return an lba of |
| 0xffffffff when the want to report a size of 0 (with |
| which they really mean no media is present) */ |
| sdkp->capacity = 0; |
| sdkp->physical_block_size = sector_size; |
| return sector_size; |
| } |
| |
| sdkp->capacity = lba + 1; |
| sdkp->physical_block_size = sector_size; |
| return sector_size; |
| } |
| |
| static int sd_try_rc16_first(struct scsi_device *sdp) |
| { |
| if (sdp->host->max_cmd_len < 16) |
| return 0; |
| if (sdp->try_rc_10_first) |
| return 0; |
| if (sdp->scsi_level > SCSI_SPC_2) |
| return 1; |
| if (scsi_device_protection(sdp)) |
| return 1; |
| return 0; |
| } |
| |
| /* |
| * read disk capacity |
| */ |
| static void |
| sd_read_capacity(struct scsi_disk *sdkp, struct queue_limits *lim, |
| unsigned char *buffer) |
| { |
| int sector_size; |
| struct scsi_device *sdp = sdkp->device; |
| |
| if (sd_try_rc16_first(sdp)) { |
| sector_size = read_capacity_16(sdkp, sdp, lim, buffer); |
| if (sector_size == -EOVERFLOW) |
| goto got_data; |
| if (sector_size == -ENODEV) |
| return; |
| if (sector_size < 0) |
| sector_size = read_capacity_10(sdkp, sdp, buffer); |
| if (sector_size < 0) |
| return; |
| } else { |
| sector_size = read_capacity_10(sdkp, sdp, buffer); |
| if (sector_size == -EOVERFLOW) |
| goto got_data; |
| if (sector_size < 0) |
| return; |
| if ((sizeof(sdkp->capacity) > 4) && |
| (sdkp->capacity > 0xffffffffULL)) { |
| int old_sector_size = sector_size; |
| sd_printk(KERN_NOTICE, sdkp, "Very big device. " |
| "Trying to use READ CAPACITY(16).\n"); |
| sector_size = read_capacity_16(sdkp, sdp, lim, buffer); |
| if (sector_size < 0) { |
| sd_printk(KERN_NOTICE, sdkp, |
| "Using 0xffffffff as device size\n"); |
| sdkp->capacity = 1 + (sector_t) 0xffffffff; |
| sector_size = old_sector_size; |
| goto got_data; |
| } |
| /* Remember that READ CAPACITY(16) succeeded */ |
| sdp->try_rc_10_first = 0; |
| } |
| } |
| |
| /* Some devices are known to return the total number of blocks, |
| * not the highest block number. Some devices have versions |
| * which do this and others which do not. Some devices we might |
| * suspect of doing this but we don't know for certain. |
| * |
| * If we know the reported capacity is wrong, decrement it. If |
| * we can only guess, then assume the number of blocks is even |
| * (usually true but not always) and err on the side of lowering |
| * the capacity. |
| */ |
| if (sdp->fix_capacity || |
| (sdp->guess_capacity && (sdkp->capacity & 0x01))) { |
| sd_printk(KERN_INFO, sdkp, "Adjusting the sector count " |
| "from its reported value: %llu\n", |
| (unsigned long long) sdkp->capacity); |
| --sdkp->capacity; |
| } |
| |
| got_data: |
| if (sector_size == 0) { |
| sector_size = 512; |
| sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, " |
| "assuming 512.\n"); |
| } |
| |
| if (sector_size != 512 && |
| sector_size != 1024 && |
| sector_size != 2048 && |
| sector_size != 4096) { |
| sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n", |
| sector_size); |
| /* |
| * The user might want to re-format the drive with |
| * a supported sectorsize. Once this happens, it |
| * would be relatively trivial to set the thing up. |
| * For this reason, we leave the thing in the table. |
| */ |
| sdkp->capacity = 0; |
| /* |
| * set a bogus sector size so the normal read/write |
| * logic in the block layer will eventually refuse any |
| * request on this device without tripping over power |
| * of two sector size assumptions |
| */ |
| sector_size = 512; |
| } |
| lim->logical_block_size = sector_size; |
| lim->physical_block_size = sdkp->physical_block_size; |
| sdkp->device->sector_size = sector_size; |
| |
| if (sdkp->capacity > 0xffffffff) |
| sdp->use_16_for_rw = 1; |
| |
| } |
| |
| /* |
| * Print disk capacity |
| */ |
| static void |
| sd_print_capacity(struct scsi_disk *sdkp, |
| sector_t old_capacity) |
| { |
| int sector_size = sdkp->device->sector_size; |
| char cap_str_2[10], cap_str_10[10]; |
| |
| if (!sdkp->first_scan && old_capacity == sdkp->capacity) |
| return; |
| |
| string_get_size(sdkp->capacity, sector_size, |
| STRING_UNITS_2, cap_str_2, sizeof(cap_str_2)); |
| string_get_size(sdkp->capacity, sector_size, |
| STRING_UNITS_10, cap_str_10, sizeof(cap_str_10)); |
| |
| sd_printk(KERN_NOTICE, sdkp, |
| "%llu %d-byte logical blocks: (%s/%s)\n", |
| (unsigned long long)sdkp->capacity, |
| sector_size, cap_str_10, cap_str_2); |
| |
| if (sdkp->physical_block_size != sector_size) |
| sd_printk(KERN_NOTICE, sdkp, |
| "%u-byte physical blocks\n", |
| sdkp->physical_block_size); |
| } |
| |
| /* called with buffer of length 512 */ |
| static inline int |
| sd_do_mode_sense(struct scsi_disk *sdkp, int dbd, int modepage, |
| unsigned char *buffer, int len, struct scsi_mode_data *data, |
| struct scsi_sense_hdr *sshdr) |
| { |
| /* |
| * If we must use MODE SENSE(10), make sure that the buffer length |
| * is at least 8 bytes so that the mode sense header fits. |
| */ |
| if (sdkp->device->use_10_for_ms && len < 8) |
| len = 8; |
| |
| return scsi_mode_sense(sdkp->device, dbd, modepage, 0, buffer, len, |
| SD_TIMEOUT, sdkp->max_retries, data, sshdr); |
| } |
| |
| /* |
| * read write protect setting, if possible - called only in sd_revalidate_disk() |
| * called with buffer of length SD_BUF_SIZE |
| */ |
| static void |
| sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer) |
| { |
| int res; |
| struct scsi_device *sdp = sdkp->device; |
| struct scsi_mode_data data; |
| int old_wp = sdkp->write_prot; |
| |
| set_disk_ro(sdkp->disk, 0); |
| if (sdp->skip_ms_page_3f) { |
| sd_first_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n"); |
| return; |
| } |
| |
| if (sdp->use_192_bytes_for_3f) { |
| res = sd_do_mode_sense(sdkp, 0, 0x3F, buffer, 192, &data, NULL); |
| } else { |
| /* |
| * First attempt: ask for all pages (0x3F), but only 4 bytes. |
| * We have to start carefully: some devices hang if we ask |
| * for more than is available. |
| */ |
| res = sd_do_mode_sense(sdkp, 0, 0x3F, buffer, 4, &data, NULL); |
| |
| /* |
| * Second attempt: ask for page 0 When only page 0 is |
| * implemented, a request for page 3F may return Sense Key |
| * 5: Illegal Request, Sense Code 24: Invalid field in |
| * CDB. |
| */ |
| if (res < 0) |
| res = sd_do_mode_sense(sdkp, 0, 0, buffer, 4, &data, NULL); |
| |
| /* |
| * Third attempt: ask 255 bytes, as we did earlier. |
| */ |
| if (res < 0) |
| res = sd_do_mode_sense(sdkp, 0, 0x3F, buffer, 255, |
| &data, NULL); |
| } |
| |
| if (res < 0) { |
| sd_first_printk(KERN_WARNING, sdkp, |
| "Test WP failed, assume Write Enabled\n"); |
| } else { |
| sdkp->write_prot = ((data.device_specific & 0x80) != 0); |
| set_disk_ro(sdkp->disk, sdkp->write_prot); |
| if (sdkp->first_scan || old_wp != sdkp->write_prot) { |
| sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n", |
| sdkp->write_prot ? "on" : "off"); |
| sd_printk(KERN_DEBUG, sdkp, "Mode Sense: %4ph\n", buffer); |
| } |
| } |
| } |
| |
| /* |
| * sd_read_cache_type - called only from sd_revalidate_disk() |
| * called with buffer of length SD_BUF_SIZE |
| */ |
| static void |
| sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) |
| { |
| int len = 0, res; |
| struct scsi_device *sdp |