/*
 * linux/arch/mips/tx4938/toshiba_rbtx4938/irq.c
 *
 * Toshiba RBTX4938 specific interrupt handlers
 * Copyright (C) 2000-2001 Toshiba Corporation
 *
 * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
 * terms of the GNU General Public License version 2. This program is
 * licensed "as is" without any warranty of any kind, whether express
 * or implied.
 *
 * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
 */

/*
IRQ  Device

16   TX4938-CP0/00 Software 0
17   TX4938-CP0/01 Software 1
18   TX4938-CP0/02 Cascade TX4938-CP0
19   TX4938-CP0/03 Multiplexed -- do not use
20   TX4938-CP0/04 Multiplexed -- do not use
21   TX4938-CP0/05 Multiplexed -- do not use
22   TX4938-CP0/06 Multiplexed -- do not use
23   TX4938-CP0/07 CPU TIMER

24   TX4938-PIC/00
25   TX4938-PIC/01
26   TX4938-PIC/02 Cascade RBTX4938-IOC
27   TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
28   TX4938-PIC/04
29   TX4938-PIC/05 TX4938 ETH1
30   TX4938-PIC/06 TX4938 ETH0
31   TX4938-PIC/07
32   TX4938-PIC/08 TX4938 SIO 0
33   TX4938-PIC/09 TX4938 SIO 1
34   TX4938-PIC/10 TX4938 DMA0
35   TX4938-PIC/11 TX4938 DMA1
36   TX4938-PIC/12 TX4938 DMA2
37   TX4938-PIC/13 TX4938 DMA3
38   TX4938-PIC/14
39   TX4938-PIC/15
40   TX4938-PIC/16 TX4938 PCIC
41   TX4938-PIC/17 TX4938 TMR0
42   TX4938-PIC/18 TX4938 TMR1
43   TX4938-PIC/19 TX4938 TMR2
44   TX4938-PIC/20
45   TX4938-PIC/21
46   TX4938-PIC/22 TX4938 PCIERR
47   TX4938-PIC/23
48   TX4938-PIC/24
49   TX4938-PIC/25
50   TX4938-PIC/26
51   TX4938-PIC/27
52   TX4938-PIC/28
53   TX4938-PIC/29
54   TX4938-PIC/30
55   TX4938-PIC/31 TX4938 SPI

56 RBTX4938-IOC/00 PCI-D
57 RBTX4938-IOC/01 PCI-C
58 RBTX4938-IOC/02 PCI-B
59 RBTX4938-IOC/03 PCI-A
60 RBTX4938-IOC/04 RTC
61 RBTX4938-IOC/05 ATA
62 RBTX4938-IOC/06 MODEM
63 RBTX4938-IOC/07 SWINT
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/tx4938/rbtx4938.h>

static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq);
static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq);

#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC"
static struct irq_chip toshiba_rbtx4938_irq_ioc_type = {
	.name = TOSHIBA_RBTX4938_IOC_NAME,
	.ack = toshiba_rbtx4938_irq_ioc_disable,
	.mask = toshiba_rbtx4938_irq_ioc_disable,
	.mask_ack = toshiba_rbtx4938_irq_ioc_disable,
	.unmask = toshiba_rbtx4938_irq_ioc_enable,
};

int
toshiba_rbtx4938_irq_nested(int sw_irq)
{
	u8 level3;

	level3 = readb(rbtx4938_imstat_addr);
	if (level3)
		/* must use fls so onboard ATA has priority */
		sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1;

	return sw_irq;
}

static struct irqaction toshiba_rbtx4938_irq_ioc_action = {
	.handler = no_action,
	.flags = 0,
	.mask = CPU_MASK_NONE,
	.name = TOSHIBA_RBTX4938_IOC_NAME,
};

/**********************************************************************************/
/* Functions for ioc                                                              */
/**********************************************************************************/
static void __init
toshiba_rbtx4938_irq_ioc_init(void)
{
	int i;

	for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG;
	     i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++)
		set_irq_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type,
					 handle_level_irq);

	setup_irq(RBTX4938_IRQ_IOCINT,
		  &toshiba_rbtx4938_irq_ioc_action);
}

static void
toshiba_rbtx4938_irq_ioc_enable(unsigned int irq)
{
	unsigned char v;

	v = readb(rbtx4938_imask_addr);
	v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
	writeb(v, rbtx4938_imask_addr);
	mmiowb();
}

static void
toshiba_rbtx4938_irq_ioc_disable(unsigned int irq)
{
	unsigned char v;

	v = readb(rbtx4938_imask_addr);
	v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
	writeb(v, rbtx4938_imask_addr);
	mmiowb();
}

void __init arch_init_irq(void)
{
	extern void tx4938_irq_init(void);

	/* Now, interrupt control disabled, */
	/* all IRC interrupts are masked, */
	/* all IRC interrupt mode are Low Active. */

	/* mask all IOC interrupts */
	writeb(0, rbtx4938_imask_addr);

	/* clear SoftInt interrupts */
	writeb(0, rbtx4938_softint_addr);
	tx4938_irq_init();
	toshiba_rbtx4938_irq_ioc_init();
	/* Onboard 10M Ether: High Active */
	set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH);
}