s2io: sparse warnings fix (rev2)
Fix warnings from sparse checker about shadowed definition and improperly
formatted ethtool_strings.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 203cc1e..22e4054 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -38,7 +38,7 @@
* Tx descriptors that can be associated with each corresponding FIFO.
* intr_type: This defines the type of interrupt. The values can be 0(INTA),
* 2(MSI_X). Default value is '2(MSI_X)'
- * lro: Specifies whether to enable Large Receive Offload (LRO) or not.
+ * lro_enable: Specifies whether to enable Large Receive Offload (LRO) or not.
* Possible values '1' for enable '0' for disable. Default is '0'
* lro_max_pkts: This parameter defines maximum number of packets can be
* aggregated as a single large packet
@@ -276,46 +276,46 @@
{"ring_5_full_cnt"},
{"ring_6_full_cnt"},
{"ring_7_full_cnt"},
- ("alarm_transceiver_temp_high"),
- ("alarm_transceiver_temp_low"),
- ("alarm_laser_bias_current_high"),
- ("alarm_laser_bias_current_low"),
- ("alarm_laser_output_power_high"),
- ("alarm_laser_output_power_low"),
- ("warn_transceiver_temp_high"),
- ("warn_transceiver_temp_low"),
- ("warn_laser_bias_current_high"),
- ("warn_laser_bias_current_low"),
- ("warn_laser_output_power_high"),
- ("warn_laser_output_power_low"),
- ("lro_aggregated_pkts"),
- ("lro_flush_both_count"),
- ("lro_out_of_sequence_pkts"),
- ("lro_flush_due_to_max_pkts"),
- ("lro_avg_aggr_pkts"),
- ("mem_alloc_fail_cnt"),
- ("pci_map_fail_cnt"),
- ("watchdog_timer_cnt"),
- ("mem_allocated"),
- ("mem_freed"),
- ("link_up_cnt"),
- ("link_down_cnt"),
- ("link_up_time"),
- ("link_down_time"),
- ("tx_tcode_buf_abort_cnt"),
- ("tx_tcode_desc_abort_cnt"),
- ("tx_tcode_parity_err_cnt"),
- ("tx_tcode_link_loss_cnt"),
- ("tx_tcode_list_proc_err_cnt"),
- ("rx_tcode_parity_err_cnt"),
- ("rx_tcode_abort_cnt"),
- ("rx_tcode_parity_abort_cnt"),
- ("rx_tcode_rda_fail_cnt"),
- ("rx_tcode_unkn_prot_cnt"),
- ("rx_tcode_fcs_err_cnt"),
- ("rx_tcode_buf_size_err_cnt"),
- ("rx_tcode_rxd_corrupt_cnt"),
- ("rx_tcode_unkn_err_cnt"),
+ {"alarm_transceiver_temp_high"},
+ {"alarm_transceiver_temp_low"},
+ {"alarm_laser_bias_current_high"},
+ {"alarm_laser_bias_current_low"},
+ {"alarm_laser_output_power_high"},
+ {"alarm_laser_output_power_low"},
+ {"warn_transceiver_temp_high"},
+ {"warn_transceiver_temp_low"},
+ {"warn_laser_bias_current_high"},
+ {"warn_laser_bias_current_low"},
+ {"warn_laser_output_power_high"},
+ {"warn_laser_output_power_low"},
+ {"lro_aggregated_pkts"},
+ {"lro_flush_both_count"},
+ {"lro_out_of_sequence_pkts"},
+ {"lro_flush_due_to_max_pkts"},
+ {"lro_avg_aggr_pkts"},
+ {"mem_alloc_fail_cnt"},
+ {"pci_map_fail_cnt"},
+ {"watchdog_timer_cnt"},
+ {"mem_allocated"},
+ {"mem_freed"},
+ {"link_up_cnt"},
+ {"link_down_cnt"},
+ {"link_up_time"},
+ {"link_down_time"},
+ {"tx_tcode_buf_abort_cnt"},
+ {"tx_tcode_desc_abort_cnt"},
+ {"tx_tcode_parity_err_cnt"},
+ {"tx_tcode_link_loss_cnt"},
+ {"tx_tcode_list_proc_err_cnt"},
+ {"rx_tcode_parity_err_cnt"},
+ {"rx_tcode_abort_cnt"},
+ {"rx_tcode_parity_abort_cnt"},
+ {"rx_tcode_rda_fail_cnt"},
+ {"rx_tcode_unkn_prot_cnt"},
+ {"rx_tcode_fcs_err_cnt"},
+ {"rx_tcode_buf_size_err_cnt"},
+ {"rx_tcode_rxd_corrupt_cnt"},
+ {"rx_tcode_unkn_err_cnt"},
{"tda_err_cnt"},
{"pfc_err_cnt"},
{"pcc_err_cnt"},
@@ -468,7 +468,9 @@
/* Interrupt type. Values can be 0(INTA), 2(MSI_X) */
S2IO_PARM_INT(intr_type, 2);
/* Large receive offload feature */
-S2IO_PARM_INT(lro, 0);
+static unsigned int lro_enable;
+module_param_named(lro, lro_enable, uint, 0);
+
/* Max pkts to be aggregated by LRO at one time. If not specified,
* aggregation happens until we hit max IP pkt size(64K)
*/
@@ -1759,7 +1761,7 @@
writeq(temp64, addr);
}
-void en_dis_err_alarms(struct s2io_nic *nic, u16 mask, int flag)
+static void en_dis_err_alarms(struct s2io_nic *nic, u16 mask, int flag)
{
struct XENA_dev_config __iomem *bar0 = nic->bar0;
register u64 gen_int_mask = 0;
@@ -4228,7 +4230,7 @@
* 1 - if alarm bit set
* 0 - if alarm bit is not set
*/
-int do_s2io_chk_alarm_bit(u64 value, void __iomem * addr,
+static int do_s2io_chk_alarm_bit(u64 value, void __iomem * addr,
unsigned long long *cnt)
{
u64 val64;
@@ -7135,7 +7137,8 @@
int ret = 0;
ret = s2io_club_tcp_session(skb->data, &tcp,
- &tcp_len, &lro, rxdp, sp);
+ &tcp_len, &lro,
+ rxdp, sp);
switch (ret) {
case 3: /* Begin anew */
lro->parent = skb;
@@ -7451,7 +7454,7 @@
else
sp->device_type = XFRAME_I_DEVICE;
- sp->lro = lro;
+ sp->lro = lro_enable;
/* Initialize some PCI/PCI-X fields of the NIC. */
s2io_init_pci(sp);
@@ -7798,7 +7801,7 @@
* the module loadable parameters and initializes PCI configuration space.
*/
-int __init s2io_starter(void)
+static int __init s2io_starter(void)
{
return pci_register_driver(&s2io_driver);
}
