net/mlx4: Adapt code for N-Port VF
Adds support for N-Port VFs, this includes:
1. Adding support in the wrapped FW command
In wrapped commands, we need to verify and convert
the slave's port into the real physical port.
Furthermore, when sending the response back to the slave,
a reverse conversion should be made.
2. Adjusting sqpn for QP1 para-virtualization
The slave assumes that sqpn is used for QP1 communication.
If the slave is assigned to a port != (first port), we need
to adjust the sqpn that will direct its QP1 packets into the
correct endpoint.
3. Adjusting gid[5] to modify the port for raw ethernet
In B0 steering, gid[5] contains the port. It needs
to be adjusted into the physical port.
4. Adjusting number of ports in the query / ports caps in the FW commands
When a slave queries the hardware, it needs to view only
the physical ports it's assigned to.
5. Adjusting the sched_qp according to the port number
The QP port is encoded in the sched_qp, thus in modify_qp we need
to encode the correct port in sched_qp.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index d0d8dd8..6bd33e2 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -225,13 +225,25 @@
#define QUERY_FUNC_CAP_FLAGS0_FORCE_PHY_WQE_GID 0x80
if (vhcr->op_modifier == 1) {
+ struct mlx4_active_ports actv_ports =
+ mlx4_get_active_ports(dev, slave);
+ int converted_port = mlx4_slave_convert_port(
+ dev, slave, vhcr->in_modifier);
+
+ if (converted_port < 0)
+ return -EINVAL;
+
+ vhcr->in_modifier = converted_port;
/* Set nic_info bit to mark new fields support */
field = QUERY_FUNC_CAP_FLAGS1_NIC_INFO;
MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_FLAGS1_OFFSET);
- field = vhcr->in_modifier; /* phys-port = logical-port */
+ /* phys-port = logical-port */
+ field = vhcr->in_modifier -
+ find_first_bit(actv_ports.ports, dev->caps.num_ports);
MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_PHYS_PORT_OFFSET);
+ field = vhcr->in_modifier;
/* size is now the QP number */
size = dev->phys_caps.base_tunnel_sqpn + 8 * slave + field - 1;
MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_QP0_TUNNEL);
@@ -249,12 +261,16 @@
QUERY_FUNC_CAP_PHYS_PORT_ID);
} else if (vhcr->op_modifier == 0) {
+ struct mlx4_active_ports actv_ports =
+ mlx4_get_active_ports(dev, slave);
/* enable rdma and ethernet interfaces, and new quota locations */
field = (QUERY_FUNC_CAP_FLAG_ETH | QUERY_FUNC_CAP_FLAG_RDMA |
QUERY_FUNC_CAP_FLAG_QUOTAS);
MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_FLAGS_OFFSET);
- field = dev->caps.num_ports;
+ field = min(
+ bitmap_weight(actv_ports.ports, dev->caps.num_ports),
+ dev->caps.num_ports);
MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_NUM_PORTS_OFFSET);
size = dev->caps.function_caps; /* set PF behaviours */
@@ -840,6 +856,10 @@
int err = 0;
u8 field;
u32 bmme_flags;
+ int real_port;
+ int slave_port;
+ int first_port;
+ struct mlx4_active_ports actv_ports;
err = mlx4_cmd_box(dev, 0, outbox->dma, 0, 0, MLX4_CMD_QUERY_DEV_CAP,
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
@@ -852,8 +872,26 @@
MLX4_GET(flags, outbox->buf, QUERY_DEV_CAP_EXT_FLAGS_OFFSET);
flags |= MLX4_DEV_CAP_FLAG_PORT_MNG_CHG_EV;
flags &= ~MLX4_DEV_CAP_FLAG_MEM_WINDOW;
+ actv_ports = mlx4_get_active_ports(dev, slave);
+ first_port = find_first_bit(actv_ports.ports, dev->caps.num_ports);
+ for (slave_port = 0, real_port = first_port;
+ real_port < first_port +
+ bitmap_weight(actv_ports.ports, dev->caps.num_ports);
+ ++real_port, ++slave_port) {
+ if (flags & (MLX4_DEV_CAP_FLAG_WOL_PORT1 << real_port))
+ flags |= MLX4_DEV_CAP_FLAG_WOL_PORT1 << slave_port;
+ else
+ flags &= ~(MLX4_DEV_CAP_FLAG_WOL_PORT1 << slave_port);
+ }
+ for (; slave_port < dev->caps.num_ports; ++slave_port)
+ flags &= ~(MLX4_DEV_CAP_FLAG_WOL_PORT1 << slave_port);
MLX4_PUT(outbox->buf, flags, QUERY_DEV_CAP_EXT_FLAGS_OFFSET);
+ MLX4_GET(field, outbox->buf, QUERY_DEV_CAP_VL_PORT_OFFSET);
+ field &= ~0x0F;
+ field |= bitmap_weight(actv_ports.ports, dev->caps.num_ports) & 0x0F;
+ MLX4_PUT(outbox->buf, field, QUERY_DEV_CAP_VL_PORT_OFFSET);
+
/* For guests, disable timestamp */
MLX4_GET(field, outbox->buf, QUERY_DEV_CAP_CQ_TS_SUPPORT_OFFSET);
field &= 0x7f;
@@ -903,12 +941,20 @@
u16 short_field;
int err;
int admin_link_state;
+ int port = mlx4_slave_convert_port(dev, slave,
+ vhcr->in_modifier & 0xFF);
#define MLX4_VF_PORT_NO_LINK_SENSE_MASK 0xE0
#define MLX4_PORT_LINK_UP_MASK 0x80
#define QUERY_PORT_CUR_MAX_PKEY_OFFSET 0x0c
#define QUERY_PORT_CUR_MAX_GID_OFFSET 0x0e
+ if (port < 0)
+ return -EINVAL;
+
+ vhcr->in_modifier = (vhcr->in_modifier & ~0xFF) |
+ (port & 0xFF);
+
err = mlx4_cmd_box(dev, 0, outbox->dma, vhcr->in_modifier, 0,
MLX4_CMD_QUERY_PORT, MLX4_CMD_TIME_CLASS_B,
MLX4_CMD_NATIVE);
@@ -936,7 +982,7 @@
QUERY_PORT_SUPPORTED_TYPE_OFFSET);
if (dev->caps.port_type[vhcr->in_modifier] == MLX4_PORT_TYPE_ETH)
- short_field = mlx4_get_slave_num_gids(dev, slave);
+ short_field = mlx4_get_slave_num_gids(dev, slave, port);
else
short_field = 1; /* slave max gids */
MLX4_PUT(outbox->buf, short_field,
@@ -1588,9 +1634,12 @@
struct mlx4_cmd_info *cmd)
{
struct mlx4_priv *priv = mlx4_priv(dev);
- int port = vhcr->in_modifier;
+ int port = mlx4_slave_convert_port(dev, slave, vhcr->in_modifier);
int err;
+ if (port < 0)
+ return -EINVAL;
+
if (priv->mfunc.master.slave_state[slave].init_port_mask & (1 << port))
return 0;
@@ -1680,9 +1729,12 @@
struct mlx4_cmd_info *cmd)
{
struct mlx4_priv *priv = mlx4_priv(dev);
- int port = vhcr->in_modifier;
+ int port = mlx4_slave_convert_port(dev, slave, vhcr->in_modifier);
int err;
+ if (port < 0)
+ return -EINVAL;
+
if (!(priv->mfunc.master.slave_state[slave].init_port_mask &
(1 << port)))
return 0;
