| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) |
| # Copyright (C) 2020 Topic Embedded Products |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/power/supply/ltc4162-l.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Linear Technology (Analog Devices) LTC4162-L Charger |
| |
| maintainers: |
| - Mike Looijmans <mike.looijmans@topic.nl> |
| |
| description: | |
| The LTC ® 4162-L is an advanced monolithic synchronous step-down switching |
| battery charger and PowerPath (TM) manager that seamlessly manages power |
| distribution between input sources such as wall adapters, backplanes, solar |
| panels, etc., and a rechargeable Lithium-Ion/Polymer battery. |
| |
| Specifications about the charger can be found at: |
| https://www.analog.com/en/products/ltc4162-s.html |
| |
| properties: |
| compatible: |
| enum: |
| - lltc,ltc4162-l |
| |
| reg: |
| maxItems: 1 |
| description: I2C address of the charger. |
| |
| lltc,rsnsb-micro-ohms: |
| description: Battery sense resistor in microohm. |
| minimum: 1000 |
| |
| lltc,rsnsi-micro-ohms: |
| description: Input current sense resistor in microohm. |
| minimum: 1000 |
| |
| lltc,cell-count: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: | |
| Number of battery cells. If not provided, will be obtained from the chip |
| once the external power is applied. Omit this when the number of cells |
| is somewhat dynamic. Without it, several measurements will return 0 until |
| the charger is connected to an external supply. |
| |
| required: |
| - compatible |
| - reg |
| - lltc,rsnsb-micro-ohms |
| - lltc,rsnsi-micro-ohms |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| i2c0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| charger: battery-charger@68 { |
| compatible = "lltc,ltc4162-l"; |
| reg = <0x68>; |
| lltc,rsnsb-micro-ohms = <10000>; |
| lltc,rsnsi-micro-ohms = <16000>; |
| lltc,cell-count = <2>; |
| }; |
| }; |
