| # SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/reset/ti,tps380x-reset.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: TI TPS380x reset controller |
| |
| maintainers: |
| - Marco Felsch <kernel@pengutronix.de> |
| |
| description: | |
| The TPS380x family [1] of supervisory circuits monitor supply voltages to |
| provide circuit initialization and timing supervision. The devices assert a |
| RESET signal if the voltage drops below a preset threshold or upon a manual |
| reset input (MR). The RESET output remains asserted for the factory |
| programmed delay after the voltage return above its threshold or after the |
| manual reset input is released. |
| |
| [1] https://www.ti.com/product/TPS3801 |
| |
| properties: |
| compatible: |
| enum: |
| - ti,tps3801 |
| |
| reset-gpios: |
| maxItems: 1 |
| description: Reference to the GPIO connected to the MR pin. |
| |
| "#reset-cells": |
| const: 0 |
| |
| required: |
| - compatible |
| - reset-gpios |
| - "#reset-cells" |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| reset: reset-controller { |
| compatible = "ti,tps3801"; |
| #reset-cells = <0>; |
| reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; |
| }; |
| ... |
