| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Driver for the Atmel Extensible DMA Controller (aka XDMAC on AT91 systems) |
| * |
| * Copyright (C) 2014 Atmel Corporation |
| * |
| * Author: Ludovic Desroches <ludovic.desroches@atmel.com> |
| */ |
| |
| #include <asm/barrier.h> |
| #include <dt-bindings/dma/at91.h> |
| #include <linux/clk.h> |
| #include <linux/dmaengine.h> |
| #include <linux/dmapool.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/of_dma.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm.h> |
| |
| #include "dmaengine.h" |
| |
| /* Global registers */ |
| #define AT_XDMAC_GTYPE 0x00 /* Global Type Register */ |
| #define AT_XDMAC_NB_CH(i) (((i) & 0x1F) + 1) /* Number of Channels Minus One */ |
| #define AT_XDMAC_FIFO_SZ(i) (((i) >> 5) & 0x7FF) /* Number of Bytes */ |
| #define AT_XDMAC_NB_REQ(i) ((((i) >> 16) & 0x3F) + 1) /* Number of Peripheral Requests Minus One */ |
| #define AT_XDMAC_GCFG 0x04 /* Global Configuration Register */ |
| #define AT_XDMAC_WRHP(i) (((i) & 0xF) << 4) |
| #define AT_XDMAC_WRMP(i) (((i) & 0xF) << 8) |
| #define AT_XDMAC_WRLP(i) (((i) & 0xF) << 12) |
| #define AT_XDMAC_RDHP(i) (((i) & 0xF) << 16) |
| #define AT_XDMAC_RDMP(i) (((i) & 0xF) << 20) |
| #define AT_XDMAC_RDLP(i) (((i) & 0xF) << 24) |
| #define AT_XDMAC_RDSG(i) (((i) & 0xF) << 28) |
| #define AT_XDMAC_GCFG_M2M (AT_XDMAC_RDLP(0xF) | AT_XDMAC_WRLP(0xF)) |
| #define AT_XDMAC_GCFG_P2M (AT_XDMAC_RDSG(0x1) | AT_XDMAC_RDHP(0x3) | \ |
| AT_XDMAC_WRHP(0x5)) |
| #define AT_XDMAC_GWAC 0x08 /* Global Weighted Arbiter Configuration Register */ |
| #define AT_XDMAC_PW0(i) (((i) & 0xF) << 0) |
| #define AT_XDMAC_PW1(i) (((i) & 0xF) << 4) |
| #define AT_XDMAC_PW2(i) (((i) & 0xF) << 8) |
| #define AT_XDMAC_PW3(i) (((i) & 0xF) << 12) |
| #define AT_XDMAC_GWAC_M2M 0 |
| #define AT_XDMAC_GWAC_P2M (AT_XDMAC_PW0(0xF) | AT_XDMAC_PW2(0xF)) |
| |
| #define AT_XDMAC_GIE 0x0C /* Global Interrupt Enable Register */ |
| #define AT_XDMAC_GID 0x10 /* Global Interrupt Disable Register */ |
| #define AT_XDMAC_GIM 0x14 /* Global Interrupt Mask Register */ |
| #define AT_XDMAC_GIS 0x18 /* Global Interrupt Status Register */ |
| #define AT_XDMAC_GE 0x1C /* Global Channel Enable Register */ |
| #define AT_XDMAC_GD 0x20 /* Global Channel Disable Register */ |
| #define AT_XDMAC_GS 0x24 /* Global Channel Status Register */ |
| #define AT_XDMAC_VERSION 0xFFC /* XDMAC Version Register */ |
| |
| /* Channel relative registers offsets */ |
| #define AT_XDMAC_CIE 0x00 /* Channel Interrupt Enable Register */ |
| #define AT_XDMAC_CIE_BIE BIT(0) /* End of Block Interrupt Enable Bit */ |
| #define AT_XDMAC_CIE_LIE BIT(1) /* End of Linked List Interrupt Enable Bit */ |
| #define AT_XDMAC_CIE_DIE BIT(2) /* End of Disable Interrupt Enable Bit */ |
| #define AT_XDMAC_CIE_FIE BIT(3) /* End of Flush Interrupt Enable Bit */ |
| #define AT_XDMAC_CIE_RBEIE BIT(4) /* Read Bus Error Interrupt Enable Bit */ |
| #define AT_XDMAC_CIE_WBEIE BIT(5) /* Write Bus Error Interrupt Enable Bit */ |
| #define AT_XDMAC_CIE_ROIE BIT(6) /* Request Overflow Interrupt Enable Bit */ |
| #define AT_XDMAC_CID 0x04 /* Channel Interrupt Disable Register */ |
| #define AT_XDMAC_CID_BID BIT(0) /* End of Block Interrupt Disable Bit */ |
| #define AT_XDMAC_CID_LID BIT(1) /* End of Linked List Interrupt Disable Bit */ |
| #define AT_XDMAC_CID_DID BIT(2) /* End of Disable Interrupt Disable Bit */ |
| #define AT_XDMAC_CID_FID BIT(3) /* End of Flush Interrupt Disable Bit */ |
| #define AT_XDMAC_CID_RBEID BIT(4) /* Read Bus Error Interrupt Disable Bit */ |
| #define AT_XDMAC_CID_WBEID BIT(5) /* Write Bus Error Interrupt Disable Bit */ |
| #define AT_XDMAC_CID_ROID BIT(6) /* Request Overflow Interrupt Disable Bit */ |
| #define AT_XDMAC_CIM 0x08 /* Channel Interrupt Mask Register */ |
| #define AT_XDMAC_CIM_BIM BIT(0) /* End of Block Interrupt Mask Bit */ |
| #define AT_XDMAC_CIM_LIM BIT(1) /* End of Linked List Interrupt Mask Bit */ |
| #define AT_XDMAC_CIM_DIM BIT(2) /* End of Disable Interrupt Mask Bit */ |
| #define AT_XDMAC_CIM_FIM BIT(3) /* End of Flush Interrupt Mask Bit */ |
| #define AT_XDMAC_CIM_RBEIM BIT(4) /* Read Bus Error Interrupt Mask Bit */ |
| #define AT_XDMAC_CIM_WBEIM BIT(5) /* Write Bus Error Interrupt Mask Bit */ |
| #define AT_XDMAC_CIM_ROIM BIT(6) /* Request Overflow Interrupt Mask Bit */ |
| #define AT_XDMAC_CIS 0x0C /* Channel Interrupt Status Register */ |
| #define AT_XDMAC_CIS_BIS BIT(0) /* End of Block Interrupt Status Bit */ |
| #define AT_XDMAC_CIS_LIS BIT(1) /* End of Linked List Interrupt Status Bit */ |
| #define AT_XDMAC_CIS_DIS BIT(2) /* End of Disable Interrupt Status Bit */ |
| #define AT_XDMAC_CIS_FIS BIT(3) /* End of Flush Interrupt Status Bit */ |
| #define AT_XDMAC_CIS_RBEIS BIT(4) /* Read Bus Error Interrupt Status Bit */ |
| #define AT_XDMAC_CIS_WBEIS BIT(5) /* Write Bus Error Interrupt Status Bit */ |
| #define AT_XDMAC_CIS_ROIS BIT(6) /* Request Overflow Interrupt Status Bit */ |
| #define AT_XDMAC_CSA 0x10 /* Channel Source Address Register */ |
| #define AT_XDMAC_CDA 0x14 /* Channel Destination Address Register */ |
| #define AT_XDMAC_CNDA 0x18 /* Channel Next Descriptor Address Register */ |
| #define AT_XDMAC_CNDA_NDAIF(i) ((i) & 0x1) /* Channel x Next Descriptor Interface */ |
| #define AT_XDMAC_CNDA_NDA(i) ((i) & 0xfffffffc) /* Channel x Next Descriptor Address */ |
| #define AT_XDMAC_CNDC 0x1C /* Channel Next Descriptor Control Register */ |
| #define AT_XDMAC_CNDC_NDE (0x1 << 0) /* Channel x Next Descriptor Enable */ |
| #define AT_XDMAC_CNDC_NDSUP (0x1 << 1) /* Channel x Next Descriptor Source Update */ |
| #define AT_XDMAC_CNDC_NDDUP (0x1 << 2) /* Channel x Next Descriptor Destination Update */ |
| #define AT_XDMAC_CNDC_NDVIEW_MASK GENMASK(28, 27) |
| #define AT_XDMAC_CNDC_NDVIEW_NDV0 (0x0 << 3) /* Channel x Next Descriptor View 0 */ |
| #define AT_XDMAC_CNDC_NDVIEW_NDV1 (0x1 << 3) /* Channel x Next Descriptor View 1 */ |
| #define AT_XDMAC_CNDC_NDVIEW_NDV2 (0x2 << 3) /* Channel x Next Descriptor View 2 */ |
| #define AT_XDMAC_CNDC_NDVIEW_NDV3 (0x3 << 3) /* Channel x Next Descriptor View 3 */ |
| #define AT_XDMAC_CUBC 0x20 /* Channel Microblock Control Register */ |
| #define AT_XDMAC_CBC 0x24 /* Channel Block Control Register */ |
| #define AT_XDMAC_CC 0x28 /* Channel Configuration Register */ |
| #define AT_XDMAC_CC_TYPE (0x1 << 0) /* Channel Transfer Type */ |
| #define AT_XDMAC_CC_TYPE_MEM_TRAN (0x0 << 0) /* Memory to Memory Transfer */ |
| #define AT_XDMAC_CC_TYPE_PER_TRAN (0x1 << 0) /* Peripheral to Memory or Memory to Peripheral Transfer */ |
| #define AT_XDMAC_CC_MBSIZE_MASK (0x3 << 1) |
| #define AT_XDMAC_CC_MBSIZE_SINGLE (0x0 << 1) |
| #define AT_XDMAC_CC_MBSIZE_FOUR (0x1 << 1) |
| #define AT_XDMAC_CC_MBSIZE_EIGHT (0x2 << 1) |
| #define AT_XDMAC_CC_MBSIZE_SIXTEEN (0x3 << 1) |
| #define AT_XDMAC_CC_DSYNC (0x1 << 4) /* Channel Synchronization */ |
| #define AT_XDMAC_CC_DSYNC_PER2MEM (0x0 << 4) |
| #define AT_XDMAC_CC_DSYNC_MEM2PER (0x1 << 4) |
| #define AT_XDMAC_CC_PROT (0x1 << 5) /* Channel Protection */ |
| #define AT_XDMAC_CC_PROT_SEC (0x0 << 5) |
| #define AT_XDMAC_CC_PROT_UNSEC (0x1 << 5) |
| #define AT_XDMAC_CC_SWREQ (0x1 << 6) /* Channel Software Request Trigger */ |
| #define AT_XDMAC_CC_SWREQ_HWR_CONNECTED (0x0 << 6) |
| #define AT_XDMAC_CC_SWREQ_SWR_CONNECTED (0x1 << 6) |
| #define AT_XDMAC_CC_MEMSET (0x1 << 7) /* Channel Fill Block of memory */ |
| #define AT_XDMAC_CC_MEMSET_NORMAL_MODE (0x0 << 7) |
| #define AT_XDMAC_CC_MEMSET_HW_MODE (0x1 << 7) |
| #define AT_XDMAC_CC_CSIZE(i) ((0x7 & (i)) << 8) /* Channel Chunk Size */ |
| #define AT_XDMAC_CC_DWIDTH_OFFSET 11 |
| #define AT_XDMAC_CC_DWIDTH_MASK (0x3 << AT_XDMAC_CC_DWIDTH_OFFSET) |
| #define AT_XDMAC_CC_DWIDTH(i) ((0x3 & (i)) << AT_XDMAC_CC_DWIDTH_OFFSET) /* Channel Data Width */ |
| #define AT_XDMAC_CC_DWIDTH_BYTE 0x0 |
| #define AT_XDMAC_CC_DWIDTH_HALFWORD 0x1 |
| #define AT_XDMAC_CC_DWIDTH_WORD 0x2 |
| #define AT_XDMAC_CC_DWIDTH_DWORD 0x3 |
| #define AT_XDMAC_CC_SIF(i) ((0x1 & (i)) << 13) /* Channel Source Interface Identifier */ |
| #define AT_XDMAC_CC_DIF(i) ((0x1 & (i)) << 14) /* Channel Destination Interface Identifier */ |
| #define AT_XDMAC_CC_SAM_MASK (0x3 << 16) /* Channel Source Addressing Mode */ |
| #define AT_XDMAC_CC_SAM_FIXED_AM (0x0 << 16) |
| #define AT_XDMAC_CC_SAM_INCREMENTED_AM (0x1 << 16) |
| #define AT_XDMAC_CC_SAM_UBS_AM (0x2 << 16) |
| #define AT_XDMAC_CC_SAM_UBS_DS_AM (0x3 << 16) |
| #define AT_XDMAC_CC_DAM_MASK (0x3 << 18) /* Channel Source Addressing Mode */ |
| #define AT_XDMAC_CC_DAM_FIXED_AM (0x0 << 18) |
| #define AT_XDMAC_CC_DAM_INCREMENTED_AM (0x1 << 18) |
| #define AT_XDMAC_CC_DAM_UBS_AM (0x2 << 18) |
| #define AT_XDMAC_CC_DAM_UBS_DS_AM (0x3 << 18) |
| #define AT_XDMAC_CC_INITD (0x1 << 21) /* Channel Initialization Terminated (read only) */ |
| #define AT_XDMAC_CC_INITD_TERMINATED (0x0 << 21) |
| #define AT_XDMAC_CC_INITD_IN_PROGRESS (0x1 << 21) |
| #define AT_XDMAC_CC_RDIP (0x1 << 22) /* Read in Progress (read only) */ |
| #define AT_XDMAC_CC_RDIP_DONE (0x0 << 22) |
| #define AT_XDMAC_CC_RDIP_IN_PROGRESS (0x1 << 22) |
| #define AT_XDMAC_CC_WRIP (0x1 << 23) /* Write in Progress (read only) */ |
| #define AT_XDMAC_CC_WRIP_DONE (0x0 << 23) |
| #define AT_XDMAC_CC_WRIP_IN_PROGRESS (0x1 << 23) |
| #define AT_XDMAC_CC_PERID(i) ((0x7f & (i)) << 24) /* Channel Peripheral Identifier */ |
| #define AT_XDMAC_CDS_MSP 0x2C /* Channel Data Stride Memory Set Pattern */ |
| #define AT_XDMAC_CSUS 0x30 /* Channel Source Microblock Stride */ |
| #define AT_XDMAC_CDUS 0x34 /* Channel Destination Microblock Stride */ |
| |
| /* Microblock control members */ |
| #define AT_XDMAC_MBR_UBC_UBLEN_MAX 0xFFFFFFUL /* Maximum Microblock Length */ |
| #define AT_XDMAC_MBR_UBC_NDE (0x1 << 24) /* Next Descriptor Enable */ |
| #define AT_XDMAC_MBR_UBC_NSEN (0x1 << 25) /* Next Descriptor Source Update */ |
| #define AT_XDMAC_MBR_UBC_NDEN (0x1 << 26) /* Next Descriptor Destination Update */ |
| #define AT_XDMAC_MBR_UBC_NDV0 (0x0 << 27) /* Next Descriptor View 0 */ |
| #define AT_XDMAC_MBR_UBC_NDV1 (0x1 << 27) /* Next Descriptor View 1 */ |
| #define AT_XDMAC_MBR_UBC_NDV2 (0x2 << 27) /* Next Descriptor View 2 */ |
| #define AT_XDMAC_MBR_UBC_NDV3 (0x3 << 27) /* Next Descriptor View 3 */ |
| |
| #define AT_XDMAC_MAX_CHAN 0x20 |
| #define AT_XDMAC_MAX_CSIZE 16 /* 16 data */ |
| #define AT_XDMAC_MAX_DWIDTH 8 /* 64 bits */ |
| #define AT_XDMAC_RESIDUE_MAX_RETRIES 5 |
| |
| #define AT_XDMAC_DMA_BUSWIDTHS\ |
| (BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) |\ |
| BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |\ |
| BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |\ |
| BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |\ |
| BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)) |
| |
| enum atc_status { |
| AT_XDMAC_CHAN_IS_CYCLIC = 0, |
| AT_XDMAC_CHAN_IS_PAUSED, |
| }; |
| |
| struct at_xdmac_layout { |
| /* Global Channel Read Suspend Register */ |
| u8 grs; |
| /* Global Write Suspend Register */ |
| u8 gws; |
| /* Global Channel Read Write Suspend Register */ |
| u8 grws; |
| /* Global Channel Read Write Resume Register */ |
| u8 grwr; |
| /* Global Channel Software Request Register */ |
| u8 gswr; |
| /* Global channel Software Request Status Register */ |
| u8 gsws; |
| /* Global Channel Software Flush Request Register */ |
| u8 gswf; |
| /* Channel reg base */ |
| u8 chan_cc_reg_base; |
| /* Source/Destination Interface must be specified or not */ |
| bool sdif; |
| /* AXI queue priority configuration supported */ |
| bool axi_config; |
| }; |
| |
| /* ----- Channels ----- */ |
| struct at_xdmac_chan { |
| struct dma_chan chan; |
| void __iomem *ch_regs; |
| u32 mask; /* Channel Mask */ |
| u32 cfg; /* Channel Configuration Register */ |
| u8 perid; /* Peripheral ID */ |
| u8 perif; /* Peripheral Interface */ |
| u8 memif; /* Memory Interface */ |
| u32 save_cc; |
| u32 save_cim; |
| u32 save_cnda; |
| u32 save_cndc; |
| u32 irq_status; |
| unsigned long status; |
| struct tasklet_struct tasklet; |
| struct dma_slave_config sconfig; |
| |
| spinlock_t lock; |
| |
| struct list_head xfers_list; |
| struct list_head free_descs_list; |
| }; |
| |
| |
| /* ----- Controller ----- */ |
| struct at_xdmac { |
| struct dma_device dma; |
| void __iomem *regs; |
| int irq; |
| struct clk *clk; |
| u32 save_gim; |
| struct dma_pool *at_xdmac_desc_pool; |
| const struct at_xdmac_layout *layout; |
| struct at_xdmac_chan chan[]; |
| }; |
| |
| |
| /* ----- Descriptors ----- */ |
| |
| /* Linked List Descriptor */ |
| struct at_xdmac_lld { |
| u32 mbr_nda; /* Next Descriptor Member */ |
| u32 mbr_ubc; /* Microblock Control Member */ |
| u32 mbr_sa; /* Source Address Member */ |
| u32 mbr_da; /* Destination Address Member */ |
| u32 mbr_cfg; /* Configuration Register */ |
| u32 mbr_bc; /* Block Control Register */ |
| u32 mbr_ds; /* Data Stride Register */ |
| u32 mbr_sus; /* Source Microblock Stride Register */ |
| u32 mbr_dus; /* Destination Microblock Stride Register */ |
| }; |
| |
| /* 64-bit alignment needed to update CNDA and CUBC registers in an atomic way. */ |
| struct at_xdmac_desc { |
| struct at_xdmac_lld lld; |
| enum dma_transfer_direction direction; |
| struct dma_async_tx_descriptor tx_dma_desc; |
| struct list_head desc_node; |
| /* Following members are only used by the first descriptor */ |
| bool active_xfer; |
| unsigned int xfer_size; |
| struct list_head descs_list; |
| struct list_head xfer_node; |
| } __aligned(sizeof(u64)); |
| |
| static const struct at_xdmac_layout at_xdmac_sama5d4_layout = { |
| .grs = 0x28, |
| .gws = 0x2C, |
| .grws = 0x30, |
| .grwr = 0x34, |
| .gswr = 0x38, |
| .gsws = 0x3C, |
| .gswf = 0x40, |
| .chan_cc_reg_base = 0x50, |
| .sdif = true, |
| .axi_config = false, |
| }; |
| |
| static const struct at_xdmac_layout at_xdmac_sama7g5_layout = { |
| .grs = 0x30, |
| .gws = 0x38, |
| .grws = 0x40, |
| .grwr = 0x44, |
| .gswr = 0x48, |
| .gsws = 0x4C, |
| .gswf = 0x50, |
| .chan_cc_reg_base = 0x60, |
| .sdif = false, |
| .axi_config = true, |
| }; |
| |
| static inline void __iomem *at_xdmac_chan_reg_base(struct at_xdmac *atxdmac, unsigned int chan_nb) |
| { |
| return atxdmac->regs + (atxdmac->layout->chan_cc_reg_base + chan_nb * 0x40); |
| } |
| |
| #define at_xdmac_read(atxdmac, reg) readl_relaxed((atxdmac)->regs + (reg)) |
| #define at_xdmac_write(atxdmac, reg, value) \ |
| writel_relaxed((value), (atxdmac)->regs + (reg)) |
| |
| #define at_xdmac_chan_read(atchan, reg) readl_relaxed((atchan)->ch_regs + (reg)) |
| #define at_xdmac_chan_write(atchan, reg, value) writel_relaxed((value), (atchan)->ch_regs + (reg)) |
| |
| static inline struct at_xdmac_chan *to_at_xdmac_chan(struct dma_chan *dchan) |
| { |
| return container_of(dchan, struct at_xdmac_chan, chan); |
| } |
| |
| static struct device *chan2dev(struct dma_chan *chan) |
| { |
| return &chan->dev->device; |
| } |
| |
| static inline struct at_xdmac *to_at_xdmac(struct dma_device *ddev) |
| { |
| return container_of(ddev, struct at_xdmac, dma); |
| } |
| |
| static inline struct at_xdmac_desc *txd_to_at_desc(struct dma_async_tx_descriptor *txd) |
| { |
| return container_of(txd, struct at_xdmac_desc, tx_dma_desc); |
| } |
| |
| static inline int at_xdmac_chan_is_cyclic(struct at_xdmac_chan *atchan) |
| { |
| return test_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status); |
| } |
| |
| static inline int at_xdmac_chan_is_paused(struct at_xdmac_chan *atchan) |
| { |
| return test_bit(AT_XDMAC_CHAN_IS_PAUSED, &atchan->status); |
| } |
| |
| static inline bool at_xdmac_chan_is_peripheral_xfer(u32 cfg) |
| { |
| return cfg & AT_XDMAC_CC_TYPE_PER_TRAN; |
| } |
| |
| static inline u8 at_xdmac_get_dwidth(u32 cfg) |
| { |
| return (cfg & AT_XDMAC_CC_DWIDTH_MASK) >> AT_XDMAC_CC_DWIDTH_OFFSET; |
| }; |
| |
| static unsigned int init_nr_desc_per_channel = 64; |
| module_param(init_nr_desc_per_channel, uint, 0644); |
| MODULE_PARM_DESC(init_nr_desc_per_channel, |
| "initial descriptors per channel (default: 64)"); |
| |
| |
| static bool at_xdmac_chan_is_enabled(struct at_xdmac_chan *atchan) |
| { |
| return at_xdmac_chan_read(atchan, AT_XDMAC_GS) & atchan->mask; |
| } |
| |
| static void at_xdmac_off(struct at_xdmac *atxdmac) |
| { |
| at_xdmac_write(atxdmac, AT_XDMAC_GD, -1L); |
| |
| /* Wait that all chans are disabled. */ |
| while (at_xdmac_read(atxdmac, AT_XDMAC_GS)) |
| cpu_relax(); |
| |
| at_xdmac_write(atxdmac, AT_XDMAC_GID, -1L); |
| } |
| |
| /* Call with lock hold. */ |
| static void at_xdmac_start_xfer(struct at_xdmac_chan *atchan, |
| struct at_xdmac_desc *first) |
| { |
| struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device); |
| u32 reg; |
| |
| dev_vdbg(chan2dev(&atchan->chan), "%s: desc 0x%p\n", __func__, first); |
| |
| /* Set transfer as active to not try to start it again. */ |
| first->active_xfer = true; |
| |
| /* Tell xdmac where to get the first descriptor. */ |
| reg = AT_XDMAC_CNDA_NDA(first->tx_dma_desc.phys); |
| if (atxdmac->layout->sdif) |
| reg |= AT_XDMAC_CNDA_NDAIF(atchan->memif); |
| |
| at_xdmac_chan_write(atchan, AT_XDMAC_CNDA, reg); |
| |
| /* |
| * When doing non cyclic transfer we need to use the next |
| * descriptor view 2 since some fields of the configuration register |
| * depend on transfer size and src/dest addresses. |
| */ |
| if (at_xdmac_chan_is_cyclic(atchan)) |
| reg = AT_XDMAC_CNDC_NDVIEW_NDV1; |
| else if ((first->lld.mbr_ubc & |
| AT_XDMAC_CNDC_NDVIEW_MASK) == AT_XDMAC_MBR_UBC_NDV3) |
| reg = AT_XDMAC_CNDC_NDVIEW_NDV3; |
| else |
| reg = AT_XDMAC_CNDC_NDVIEW_NDV2; |
| /* |
| * Even if the register will be updated from the configuration in the |
| * descriptor when using view 2 or higher, the PROT bit won't be set |
| * properly. This bit can be modified only by using the channel |
| * configuration register. |
| */ |
| at_xdmac_chan_write(atchan, AT_XDMAC_CC, first->lld.mbr_cfg); |
| |
| reg |= AT_XDMAC_CNDC_NDDUP |
| | AT_XDMAC_CNDC_NDSUP |
| | AT_XDMAC_CNDC_NDE; |
| at_xdmac_chan_write(atchan, AT_XDMAC_CNDC, reg); |
| |
| dev_vdbg(chan2dev(&atchan->chan), |
| "%s: CC=0x%08x CNDA=0x%08x, CNDC=0x%08x, CSA=0x%08x, CDA=0x%08x, CUBC=0x%08x\n", |
| __func__, at_xdmac_chan_read(atchan, AT_XDMAC_CC), |
| at_xdmac_chan_read(atchan, AT_XDMAC_CNDA), |
| at_xdmac_chan_read(atchan, AT_XDMAC_CNDC), |
| at_xdmac_chan_read(atchan, AT_XDMAC_CSA), |
| at_xdmac_chan_read(atchan, AT_XDMAC_CDA), |
| at_xdmac_chan_read(atchan, AT_XDMAC_CUBC)); |
| |
| at_xdmac_chan_write(atchan, AT_XDMAC_CID, 0xffffffff); |
| reg = AT_XDMAC_CIE_RBEIE | AT_XDMAC_CIE_WBEIE; |
| /* |
| * Request Overflow Error is only for peripheral synchronized transfers |
| */ |
| if (at_xdmac_chan_is_peripheral_xfer(first->lld.mbr_cfg)) |
| reg |= AT_XDMAC_CIE_ROIE; |
| |
| /* |
| * There is no end of list when doing cyclic dma, we need to get |
| * an interrupt after each periods. |
| */ |
| if (at_xdmac_chan_is_cyclic(atchan)) |
| at_xdmac_chan_write(atchan, AT_XDMAC_CIE, |
| reg | AT_XDMAC_CIE_BIE); |
| else |
| at_xdmac_chan_write(atchan, AT_XDMAC_CIE, |
| reg | AT_XDMAC_CIE_LIE); |
| at_xdmac_write(atxdmac, AT_XDMAC_GIE, atchan->mask); |
| dev_vdbg(chan2dev(&atchan->chan), |
| "%s: enable channel (0x%08x)\n", __func__, atchan->mask); |
| wmb(); |
| at_xdmac_write(atxdmac, AT_XDMAC_GE, atchan->mask); |
| |
| dev_vdbg(chan2dev(&atchan->chan), |
| "%s: CC=0x%08x CNDA=0x%08x, CNDC=0x%08x, CSA=0x%08x, CDA=0x%08x, CUBC=0x%08x\n", |
| __func__, at_xdmac_chan_read(atchan, AT_XDMAC_CC), |
| at_xdmac_chan_read(atchan, AT_XDMAC_CNDA), |
| at_xdmac_chan_read(atchan, AT_XDMAC_CNDC), |
| at_xdmac_chan_read(atchan, AT_XDMAC_CSA), |
| at_xdmac_chan_read(atchan, AT_XDMAC_CDA), |
| at_xdmac_chan_read(atchan, AT_XDMAC_CUBC)); |
| |
| } |
| |
| static dma_cookie_t at_xdmac_tx_submit(struct dma_async_tx_descriptor *tx) |
| { |
| struct at_xdmac_desc *desc = txd_to_at_desc(tx); |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(tx->chan); |
| dma_cookie_t cookie; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&atchan->lock, irqflags); |
| cookie = dma_cookie_assign(tx); |
| |
| list_add_tail(&desc->xfer_node, &atchan->xfers_list); |
| spin_unlock_irqrestore(&atchan->lock, irqflags); |
| |
| dev_vdbg(chan2dev(tx->chan), "%s: atchan 0x%p, add desc 0x%p to xfers_list\n", |
| __func__, atchan, desc); |
| |
| return cookie; |
| } |
| |
| static struct at_xdmac_desc *at_xdmac_alloc_desc(struct dma_chan *chan, |
| gfp_t gfp_flags) |
| { |
| struct at_xdmac_desc *desc; |
| struct at_xdmac *atxdmac = to_at_xdmac(chan->device); |
| dma_addr_t phys; |
| |
| desc = dma_pool_zalloc(atxdmac->at_xdmac_desc_pool, gfp_flags, &phys); |
| if (desc) { |
| INIT_LIST_HEAD(&desc->descs_list); |
| dma_async_tx_descriptor_init(&desc->tx_dma_desc, chan); |
| desc->tx_dma_desc.tx_submit = at_xdmac_tx_submit; |
| desc->tx_dma_desc.phys = phys; |
| } |
| |
| return desc; |
| } |
| |
| static void at_xdmac_init_used_desc(struct at_xdmac_desc *desc) |
| { |
| memset(&desc->lld, 0, sizeof(desc->lld)); |
| INIT_LIST_HEAD(&desc->descs_list); |
| desc->direction = DMA_TRANS_NONE; |
| desc->xfer_size = 0; |
| desc->active_xfer = false; |
| } |
| |
| /* Call must be protected by lock. */ |
| static struct at_xdmac_desc *at_xdmac_get_desc(struct at_xdmac_chan *atchan) |
| { |
| struct at_xdmac_desc *desc; |
| |
| if (list_empty(&atchan->free_descs_list)) { |
| desc = at_xdmac_alloc_desc(&atchan->chan, GFP_NOWAIT); |
| } else { |
| desc = list_first_entry(&atchan->free_descs_list, |
| struct at_xdmac_desc, desc_node); |
| list_del(&desc->desc_node); |
| at_xdmac_init_used_desc(desc); |
| } |
| |
| return desc; |
| } |
| |
| static void at_xdmac_queue_desc(struct dma_chan *chan, |
| struct at_xdmac_desc *prev, |
| struct at_xdmac_desc *desc) |
| { |
| if (!prev || !desc) |
| return; |
| |
| prev->lld.mbr_nda = desc->tx_dma_desc.phys; |
| prev->lld.mbr_ubc |= AT_XDMAC_MBR_UBC_NDE; |
| |
| dev_dbg(chan2dev(chan), "%s: chain lld: prev=0x%p, mbr_nda=%pad\n", |
| __func__, prev, &prev->lld.mbr_nda); |
| } |
| |
| static inline void at_xdmac_increment_block_count(struct dma_chan *chan, |
| struct at_xdmac_desc *desc) |
| { |
| if (!desc) |
| return; |
| |
| desc->lld.mbr_bc++; |
| |
| dev_dbg(chan2dev(chan), |
| "%s: incrementing the block count of the desc 0x%p\n", |
| __func__, desc); |
| } |
| |
| static struct dma_chan *at_xdmac_xlate(struct of_phandle_args *dma_spec, |
| struct of_dma *of_dma) |
| { |
| struct at_xdmac *atxdmac = of_dma->of_dma_data; |
| struct at_xdmac_chan *atchan; |
| struct dma_chan *chan; |
| struct device *dev = atxdmac->dma.dev; |
| |
| if (dma_spec->args_count != 1) { |
| dev_err(dev, "dma phandler args: bad number of args\n"); |
| return NULL; |
| } |
| |
| chan = dma_get_any_slave_channel(&atxdmac->dma); |
| if (!chan) { |
| dev_err(dev, "can't get a dma channel\n"); |
| return NULL; |
| } |
| |
| atchan = to_at_xdmac_chan(chan); |
| atchan->memif = AT91_XDMAC_DT_GET_MEM_IF(dma_spec->args[0]); |
| atchan->perif = AT91_XDMAC_DT_GET_PER_IF(dma_spec->args[0]); |
| atchan->perid = AT91_XDMAC_DT_GET_PERID(dma_spec->args[0]); |
| dev_dbg(dev, "chan dt cfg: memif=%u perif=%u perid=%u\n", |
| atchan->memif, atchan->perif, atchan->perid); |
| |
| return chan; |
| } |
| |
| static int at_xdmac_compute_chan_conf(struct dma_chan *chan, |
| enum dma_transfer_direction direction) |
| { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device); |
| int csize, dwidth; |
| |
| if (direction == DMA_DEV_TO_MEM) { |
| atchan->cfg = |
| AT91_XDMAC_DT_PERID(atchan->perid) |
| | AT_XDMAC_CC_DAM_INCREMENTED_AM |
| | AT_XDMAC_CC_SAM_FIXED_AM |
| | AT_XDMAC_CC_SWREQ_HWR_CONNECTED |
| | AT_XDMAC_CC_DSYNC_PER2MEM |
| | AT_XDMAC_CC_MBSIZE_SIXTEEN |
| | AT_XDMAC_CC_TYPE_PER_TRAN; |
| if (atxdmac->layout->sdif) |
| atchan->cfg |= AT_XDMAC_CC_DIF(atchan->memif) | |
| AT_XDMAC_CC_SIF(atchan->perif); |
| |
| csize = ffs(atchan->sconfig.src_maxburst) - 1; |
| if (csize < 0) { |
| dev_err(chan2dev(chan), "invalid src maxburst value\n"); |
| return -EINVAL; |
| } |
| atchan->cfg |= AT_XDMAC_CC_CSIZE(csize); |
| dwidth = ffs(atchan->sconfig.src_addr_width) - 1; |
| if (dwidth < 0) { |
| dev_err(chan2dev(chan), "invalid src addr width value\n"); |
| return -EINVAL; |
| } |
| atchan->cfg |= AT_XDMAC_CC_DWIDTH(dwidth); |
| } else if (direction == DMA_MEM_TO_DEV) { |
| atchan->cfg = |
| AT91_XDMAC_DT_PERID(atchan->perid) |
| | AT_XDMAC_CC_DAM_FIXED_AM |
| | AT_XDMAC_CC_SAM_INCREMENTED_AM |
| | AT_XDMAC_CC_SWREQ_HWR_CONNECTED |
| | AT_XDMAC_CC_DSYNC_MEM2PER |
| | AT_XDMAC_CC_MBSIZE_SIXTEEN |
| | AT_XDMAC_CC_TYPE_PER_TRAN; |
| if (atxdmac->layout->sdif) |
| atchan->cfg |= AT_XDMAC_CC_DIF(atchan->perif) | |
| AT_XDMAC_CC_SIF(atchan->memif); |
| |
| csize = ffs(atchan->sconfig.dst_maxburst) - 1; |
| if (csize < 0) { |
| dev_err(chan2dev(chan), "invalid src maxburst value\n"); |
| return -EINVAL; |
| } |
| atchan->cfg |= AT_XDMAC_CC_CSIZE(csize); |
| dwidth = ffs(atchan->sconfig.dst_addr_width) - 1; |
| if (dwidth < 0) { |
| dev_err(chan2dev(chan), "invalid dst addr width value\n"); |
| return -EINVAL; |
| } |
| atchan->cfg |= AT_XDMAC_CC_DWIDTH(dwidth); |
| } |
| |
| dev_dbg(chan2dev(chan), "%s: cfg=0x%08x\n", __func__, atchan->cfg); |
| |
| return 0; |
| } |
| |
| /* |
| * Only check that maxburst and addr width values are supported by the |
| * the controller but not that the configuration is good to perform the |
| * transfer since we don't know the direction at this stage. |
| */ |
| static int at_xdmac_check_slave_config(struct dma_slave_config *sconfig) |
| { |
| if ((sconfig->src_maxburst > AT_XDMAC_MAX_CSIZE) |
| || (sconfig->dst_maxburst > AT_XDMAC_MAX_CSIZE)) |
| return -EINVAL; |
| |
| if ((sconfig->src_addr_width > AT_XDMAC_MAX_DWIDTH) |
| || (sconfig->dst_addr_width > AT_XDMAC_MAX_DWIDTH)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int at_xdmac_set_slave_config(struct dma_chan *chan, |
| struct dma_slave_config *sconfig) |
| { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| |
| if (at_xdmac_check_slave_config(sconfig)) { |
| dev_err(chan2dev(chan), "invalid slave configuration\n"); |
| return -EINVAL; |
| } |
| |
| memcpy(&atchan->sconfig, sconfig, sizeof(atchan->sconfig)); |
| |
| return 0; |
| } |
| |
| static struct dma_async_tx_descriptor * |
| at_xdmac_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, |
| unsigned int sg_len, enum dma_transfer_direction direction, |
| unsigned long flags, void *context) |
| { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| struct at_xdmac_desc *first = NULL, *prev = NULL; |
| struct scatterlist *sg; |
| int i; |
| unsigned int xfer_size = 0; |
| unsigned long irqflags; |
| struct dma_async_tx_descriptor *ret = NULL; |
| |
| if (!sgl) |
| return NULL; |
| |
| if (!is_slave_direction(direction)) { |
| dev_err(chan2dev(chan), "invalid DMA direction\n"); |
| return NULL; |
| } |
| |
| dev_dbg(chan2dev(chan), "%s: sg_len=%d, dir=%s, flags=0x%lx\n", |
| __func__, sg_len, |
| direction == DMA_MEM_TO_DEV ? "to device" : "from device", |
| flags); |
| |
| /* Protect dma_sconfig field that can be modified by set_slave_conf. */ |
| spin_lock_irqsave(&atchan->lock, irqflags); |
| |
| if (at_xdmac_compute_chan_conf(chan, direction)) |
| goto spin_unlock; |
| |
| /* Prepare descriptors. */ |
| for_each_sg(sgl, sg, sg_len, i) { |
| struct at_xdmac_desc *desc = NULL; |
| u32 len, mem, dwidth, fixed_dwidth; |
| |
| len = sg_dma_len(sg); |
| mem = sg_dma_address(sg); |
| if (unlikely(!len)) { |
| dev_err(chan2dev(chan), "sg data length is zero\n"); |
| goto spin_unlock; |
| } |
| dev_dbg(chan2dev(chan), "%s: * sg%d len=%u, mem=0x%08x\n", |
| __func__, i, len, mem); |
| |
| desc = at_xdmac_get_desc(atchan); |
| if (!desc) { |
| dev_err(chan2dev(chan), "can't get descriptor\n"); |
| if (first) |
| list_splice_tail_init(&first->descs_list, |
| &atchan->free_descs_list); |
| goto spin_unlock; |
| } |
| |
| /* Linked list descriptor setup. */ |
| if (direction == DMA_DEV_TO_MEM) { |
| desc->lld.mbr_sa = atchan->sconfig.src_addr; |
| desc->lld.mbr_da = mem; |
| } else { |
| desc->lld.mbr_sa = mem; |
| desc->lld.mbr_da = atchan->sconfig.dst_addr; |
| } |
| dwidth = at_xdmac_get_dwidth(atchan->cfg); |
| fixed_dwidth = IS_ALIGNED(len, 1 << dwidth) |
| ? dwidth |
| : AT_XDMAC_CC_DWIDTH_BYTE; |
| desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV2 /* next descriptor view */ |
| | AT_XDMAC_MBR_UBC_NDEN /* next descriptor dst parameter update */ |
| | AT_XDMAC_MBR_UBC_NSEN /* next descriptor src parameter update */ |
| | (len >> fixed_dwidth); /* microblock length */ |
| desc->lld.mbr_cfg = (atchan->cfg & ~AT_XDMAC_CC_DWIDTH_MASK) | |
| AT_XDMAC_CC_DWIDTH(fixed_dwidth); |
| dev_dbg(chan2dev(chan), |
| "%s: lld: mbr_sa=%pad, mbr_da=%pad, mbr_ubc=0x%08x\n", |
| __func__, &desc->lld.mbr_sa, &desc->lld.mbr_da, desc->lld.mbr_ubc); |
| |
| /* Chain lld. */ |
| if (prev) |
| at_xdmac_queue_desc(chan, prev, desc); |
| |
| prev = desc; |
| if (!first) |
| first = desc; |
| |
| dev_dbg(chan2dev(chan), "%s: add desc 0x%p to descs_list 0x%p\n", |
| __func__, desc, first); |
| list_add_tail(&desc->desc_node, &first->descs_list); |
| xfer_size += len; |
| } |
| |
| |
| first->tx_dma_desc.flags = flags; |
| first->xfer_size = xfer_size; |
| first->direction = direction; |
| ret = &first->tx_dma_desc; |
| |
| spin_unlock: |
| spin_unlock_irqrestore(&atchan->lock, irqflags); |
| return ret; |
| } |
| |
| static struct dma_async_tx_descriptor * |
| at_xdmac_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr, |
| size_t buf_len, size_t period_len, |
| enum dma_transfer_direction direction, |
| unsigned long flags) |
| { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| struct at_xdmac_desc *first = NULL, *prev = NULL; |
| unsigned int periods = buf_len / period_len; |
| int i; |
| unsigned long irqflags; |
| |
| dev_dbg(chan2dev(chan), "%s: buf_addr=%pad, buf_len=%zd, period_len=%zd, dir=%s, flags=0x%lx\n", |
| __func__, &buf_addr, buf_len, period_len, |
| direction == DMA_MEM_TO_DEV ? "mem2per" : "per2mem", flags); |
| |
| if (!is_slave_direction(direction)) { |
| dev_err(chan2dev(chan), "invalid DMA direction\n"); |
| return NULL; |
| } |
| |
| if (test_and_set_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status)) { |
| dev_err(chan2dev(chan), "channel currently used\n"); |
| return NULL; |
| } |
| |
| if (at_xdmac_compute_chan_conf(chan, direction)) |
| return NULL; |
| |
| for (i = 0; i < periods; i++) { |
| struct at_xdmac_desc *desc = NULL; |
| |
| spin_lock_irqsave(&atchan->lock, irqflags); |
| desc = at_xdmac_get_desc(atchan); |
| if (!desc) { |
| dev_err(chan2dev(chan), "can't get descriptor\n"); |
| if (first) |
| list_splice_tail_init(&first->descs_list, |
| &atchan->free_descs_list); |
| spin_unlock_irqrestore(&atchan->lock, irqflags); |
| return NULL; |
| } |
| spin_unlock_irqrestore(&atchan->lock, irqflags); |
| dev_dbg(chan2dev(chan), |
| "%s: desc=0x%p, tx_dma_desc.phys=%pad\n", |
| __func__, desc, &desc->tx_dma_desc.phys); |
| |
| if (direction == DMA_DEV_TO_MEM) { |
| desc->lld.mbr_sa = atchan->sconfig.src_addr; |
| desc->lld.mbr_da = buf_addr + i * period_len; |
| } else { |
| desc->lld.mbr_sa = buf_addr + i * period_len; |
| desc->lld.mbr_da = atchan->sconfig.dst_addr; |
| } |
| desc->lld.mbr_cfg = atchan->cfg; |
| desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV1 |
| | AT_XDMAC_MBR_UBC_NDEN |
| | AT_XDMAC_MBR_UBC_NSEN |
| | period_len >> at_xdmac_get_dwidth(desc->lld.mbr_cfg); |
| |
| dev_dbg(chan2dev(chan), |
| "%s: lld: mbr_sa=%pad, mbr_da=%pad, mbr_ubc=0x%08x\n", |
| __func__, &desc->lld.mbr_sa, &desc->lld.mbr_da, desc->lld.mbr_ubc); |
| |
| /* Chain lld. */ |
| if (prev) |
| at_xdmac_queue_desc(chan, prev, desc); |
| |
| prev = desc; |
| if (!first) |
| first = desc; |
| |
| dev_dbg(chan2dev(chan), "%s: add desc 0x%p to descs_list 0x%p\n", |
| __func__, desc, first); |
| list_add_tail(&desc->desc_node, &first->descs_list); |
| } |
| |
| at_xdmac_queue_desc(chan, prev, first); |
| first->tx_dma_desc.flags = flags; |
| first->xfer_size = buf_len; |
| first->direction = direction; |
| |
| return &first->tx_dma_desc; |
| } |
| |
| static inline u32 at_xdmac_align_width(struct dma_chan *chan, dma_addr_t addr) |
| { |
| u32 width; |
| |
| /* |
| * Check address alignment to select the greater data width we |
| * can use. |
| * |
| * Some XDMAC implementations don't provide dword transfer, in |
| * this case selecting dword has the same behavior as |
| * selecting word transfers. |
| */ |
| if (!(addr & 7)) { |
| width = AT_XDMAC_CC_DWIDTH_DWORD; |
| dev_dbg(chan2dev(chan), "%s: dwidth: double word\n", __func__); |
| } else if (!(addr & 3)) { |
| width = AT_XDMAC_CC_DWIDTH_WORD; |
| dev_dbg(chan2dev(chan), "%s: dwidth: word\n", __func__); |
| } else if (!(addr & 1)) { |
| width = AT_XDMAC_CC_DWIDTH_HALFWORD; |
| dev_dbg(chan2dev(chan), "%s: dwidth: half word\n", __func__); |
| } else { |
| width = AT_XDMAC_CC_DWIDTH_BYTE; |
| dev_dbg(chan2dev(chan), "%s: dwidth: byte\n", __func__); |
| } |
| |
| return width; |
| } |
| |
| static struct at_xdmac_desc * |
| at_xdmac_interleaved_queue_desc(struct dma_chan *chan, |
| struct at_xdmac_chan *atchan, |
| struct at_xdmac_desc *prev, |
| dma_addr_t src, dma_addr_t dst, |
| struct dma_interleaved_template *xt, |
| struct data_chunk *chunk) |
| { |
| struct at_xdmac_desc *desc; |
| u32 dwidth; |
| unsigned long flags; |
| size_t ublen; |
| /* |
| * WARNING: The channel configuration is set here since there is no |
| * dmaengine_slave_config call in this case. Moreover we don't know the |
| * direction, it involves we can't dynamically set the source and dest |
| * interface so we have to use the same one. Only interface 0 allows EBI |
| * access. Hopefully we can access DDR through both ports (at least on |
| * SAMA5D4x), so we can use the same interface for source and dest, |
| * that solves the fact we don't know the direction. |
| * ERRATA: Even if useless for memory transfers, the PERID has to not |
| * match the one of another channel. If not, it could lead to spurious |
| * flag status. |
| * For SAMA7G5x case, the SIF and DIF fields are no longer used. |
| * Thus, no need to have the SIF/DIF interfaces here. |
| * For SAMA5D4x and SAMA5D2x the SIF and DIF are already configured as |
| * zero. |
| */ |
| u32 chan_cc = AT_XDMAC_CC_PERID(0x7f) |
| | AT_XDMAC_CC_MBSIZE_SIXTEEN |
| | AT_XDMAC_CC_TYPE_MEM_TRAN; |
| |
| dwidth = at_xdmac_align_width(chan, src | dst | chunk->size); |
| if (chunk->size >= (AT_XDMAC_MBR_UBC_UBLEN_MAX << dwidth)) { |
| dev_dbg(chan2dev(chan), |
| "%s: chunk too big (%zu, max size %lu)...\n", |
| __func__, chunk->size, |
| AT_XDMAC_MBR_UBC_UBLEN_MAX << dwidth); |
| return NULL; |
| } |
| |
| if (prev) |
| dev_dbg(chan2dev(chan), |
| "Adding items at the end of desc 0x%p\n", prev); |
| |
| if (xt->src_inc) { |
| if (xt->src_sgl) |
| chan_cc |= AT_XDMAC_CC_SAM_UBS_AM; |
| else |
| chan_cc |= AT_XDMAC_CC_SAM_INCREMENTED_AM; |
| } |
| |
| if (xt->dst_inc) { |
| if (xt->dst_sgl) |
| chan_cc |= AT_XDMAC_CC_DAM_UBS_AM; |
| else |
| chan_cc |= AT_XDMAC_CC_DAM_INCREMENTED_AM; |
| } |
| |
| spin_lock_irqsave(&atchan->lock, flags); |
| desc = at_xdmac_get_desc(atchan); |
| spin_unlock_irqrestore(&atchan->lock, flags); |
| if (!desc) { |
| dev_err(chan2dev(chan), "can't get descriptor\n"); |
| return NULL; |
| } |
| |
| chan_cc |= AT_XDMAC_CC_DWIDTH(dwidth); |
| |
| ublen = chunk->size >> dwidth; |
| |
| desc->lld.mbr_sa = src; |
| desc->lld.mbr_da = dst; |
| desc->lld.mbr_sus = dmaengine_get_src_icg(xt, chunk); |
| desc->lld.mbr_dus = dmaengine_get_dst_icg(xt, chunk); |
| |
| desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV3 |
| | AT_XDMAC_MBR_UBC_NDEN |
| | AT_XDMAC_MBR_UBC_NSEN |
| | ublen; |
| desc->lld.mbr_cfg = chan_cc; |
| |
| dev_dbg(chan2dev(chan), |
| "%s: lld: mbr_sa=%pad, mbr_da=%pad, mbr_ubc=0x%08x, mbr_cfg=0x%08x\n", |
| __func__, &desc->lld.mbr_sa, &desc->lld.mbr_da, |
| desc->lld.mbr_ubc, desc->lld.mbr_cfg); |
| |
| /* Chain lld. */ |
| if (prev) |
| at_xdmac_queue_desc(chan, prev, desc); |
| |
| return desc; |
| } |
| |
| static struct dma_async_tx_descriptor * |
| at_xdmac_prep_interleaved(struct dma_chan *chan, |
| struct dma_interleaved_template *xt, |
| unsigned long flags) |
| { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| struct at_xdmac_desc *prev = NULL, *first = NULL; |
| dma_addr_t dst_addr, src_addr; |
| size_t src_skip = 0, dst_skip = 0, len = 0; |
| struct data_chunk *chunk; |
| int i; |
| |
| if (!xt || !xt->numf || (xt->dir != DMA_MEM_TO_MEM)) |
| return NULL; |
| |
| /* |
| * TODO: Handle the case where we have to repeat a chain of |
| * descriptors... |
| */ |
| if ((xt->numf > 1) && (xt->frame_size > 1)) |
| return NULL; |
| |
| dev_dbg(chan2dev(chan), "%s: src=%pad, dest=%pad, numf=%zu, frame_size=%zu, flags=0x%lx\n", |
| __func__, &xt->src_start, &xt->dst_start, xt->numf, |
| xt->frame_size, flags); |
| |
| src_addr = xt->src_start; |
| dst_addr = xt->dst_start; |
| |
| if (xt->numf > 1) { |
| first = at_xdmac_interleaved_queue_desc(chan, atchan, |
| NULL, |
| src_addr, dst_addr, |
| xt, xt->sgl); |
| |
| /* Length of the block is (BLEN+1) microblocks. */ |
| for (i = 0; i < xt->numf - 1; i++) |
| at_xdmac_increment_block_count(chan, first); |
| |
| dev_dbg(chan2dev(chan), "%s: add desc 0x%p to descs_list 0x%p\n", |
| __func__, first, first); |
| list_add_tail(&first->desc_node, &first->descs_list); |
| } else { |
| for (i = 0; i < xt->frame_size; i++) { |
| size_t src_icg = 0, dst_icg = 0; |
| struct at_xdmac_desc *desc; |
| |
| chunk = xt->sgl + i; |
| |
| dst_icg = dmaengine_get_dst_icg(xt, chunk); |
| src_icg = dmaengine_get_src_icg(xt, chunk); |
| |
| src_skip = chunk->size + src_icg; |
| dst_skip = chunk->size + dst_icg; |
| |
| dev_dbg(chan2dev(chan), |
| "%s: chunk size=%zu, src icg=%zu, dst icg=%zu\n", |
| __func__, chunk->size, src_icg, dst_icg); |
| |
| desc = at_xdmac_interleaved_queue_desc(chan, atchan, |
| prev, |
| src_addr, dst_addr, |
| xt, chunk); |
| if (!desc) { |
| list_splice_tail_init(&first->descs_list, |
| &atchan->free_descs_list); |
| return NULL; |
| } |
| |
| if (!first) |
| first = desc; |
| |
| dev_dbg(chan2dev(chan), "%s: add desc 0x%p to descs_list 0x%p\n", |
| __func__, desc, first); |
| list_add_tail(&desc->desc_node, &first->descs_list); |
| |
| if (xt->src_sgl) |
| src_addr += src_skip; |
| |
| if (xt->dst_sgl) |
| dst_addr += dst_skip; |
| |
| len += chunk->size; |
| prev = desc; |
| } |
| } |
| |
| first->tx_dma_desc.cookie = -EBUSY; |
| first->tx_dma_desc.flags = flags; |
| first->xfer_size = len; |
| |
| return &first->tx_dma_desc; |
| } |
| |
| static struct dma_async_tx_descriptor * |
| at_xdmac_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, |
| size_t len, unsigned long flags) |
| { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| struct at_xdmac_desc *first = NULL, *prev = NULL; |
| size_t remaining_size = len, xfer_size = 0, ublen; |
| dma_addr_t src_addr = src, dst_addr = dest; |
| u32 dwidth; |
| /* |
| * WARNING: We don't know the direction, it involves we can't |
| * dynamically set the source and dest interface so we have to use the |
| * same one. Only interface 0 allows EBI access. Hopefully we can |
| * access DDR through both ports (at least on SAMA5D4x), so we can use |
| * the same interface for source and dest, that solves the fact we |
| * don't know the direction. |
| * ERRATA: Even if useless for memory transfers, the PERID has to not |
| * match the one of another channel. If not, it could lead to spurious |
| * flag status. |
| * For SAMA7G5x case, the SIF and DIF fields are no longer used. |
| * Thus, no need to have the SIF/DIF interfaces here. |
| * For SAMA5D4x and SAMA5D2x the SIF and DIF are already configured as |
| * zero. |
| */ |
| u32 chan_cc = AT_XDMAC_CC_PERID(0x7f) |
| | AT_XDMAC_CC_DAM_INCREMENTED_AM |
| | AT_XDMAC_CC_SAM_INCREMENTED_AM |
| | AT_XDMAC_CC_MBSIZE_SIXTEEN |
| | AT_XDMAC_CC_TYPE_MEM_TRAN; |
| unsigned long irqflags; |
| |
| dev_dbg(chan2dev(chan), "%s: src=%pad, dest=%pad, len=%zd, flags=0x%lx\n", |
| __func__, &src, &dest, len, flags); |
| |
| if (unlikely(!len)) |
| return NULL; |
| |
| dwidth = at_xdmac_align_width(chan, src_addr | dst_addr); |
| |
| /* Prepare descriptors. */ |
| while (remaining_size) { |
| struct at_xdmac_desc *desc = NULL; |
| |
| dev_dbg(chan2dev(chan), "%s: remaining_size=%zu\n", __func__, remaining_size); |
| |
| spin_lock_irqsave(&atchan->lock, irqflags); |
| desc = at_xdmac_get_desc(atchan); |
| spin_unlock_irqrestore(&atchan->lock, irqflags); |
| if (!desc) { |
| dev_err(chan2dev(chan), "can't get descriptor\n"); |
| if (first) |
| list_splice_tail_init(&first->descs_list, |
| &atchan->free_descs_list); |
| return NULL; |
| } |
| |
| /* Update src and dest addresses. */ |
| src_addr += xfer_size; |
| dst_addr += xfer_size; |
| |
| if (remaining_size >= AT_XDMAC_MBR_UBC_UBLEN_MAX << dwidth) |
| xfer_size = AT_XDMAC_MBR_UBC_UBLEN_MAX << dwidth; |
| else |
| xfer_size = remaining_size; |
| |
| dev_dbg(chan2dev(chan), "%s: xfer_size=%zu\n", __func__, xfer_size); |
| |
| /* Check remaining length and change data width if needed. */ |
| dwidth = at_xdmac_align_width(chan, |
| src_addr | dst_addr | xfer_size); |
| chan_cc &= ~AT_XDMAC_CC_DWIDTH_MASK; |
| chan_cc |= AT_XDMAC_CC_DWIDTH(dwidth); |
| |
| ublen = xfer_size >> dwidth; |
| remaining_size -= xfer_size; |
| |
| desc->lld.mbr_sa = src_addr; |
| desc->lld.mbr_da = dst_addr; |
| desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV2 |
| | AT_XDMAC_MBR_UBC_NDEN |
| | AT_XDMAC_MBR_UBC_NSEN |
| | ublen; |
| desc->lld.mbr_cfg = chan_cc; |
| |
| dev_dbg(chan2dev(chan), |
| "%s: lld: mbr_sa=%pad, mbr_da=%pad, mbr_ubc=0x%08x, mbr_cfg=0x%08x\n", |
| __func__, &desc->lld.mbr_sa, &desc->lld.mbr_da, desc->lld.mbr_ubc, desc->lld.mbr_cfg); |
| |
| /* Chain lld. */ |
| if (prev) |
| at_xdmac_queue_desc(chan, prev, desc); |
| |
| prev = desc; |
| if (!first) |
| first = desc; |
| |
| dev_dbg(chan2dev(chan), "%s: add desc 0x%p to descs_list 0x%p\n", |
| __func__, desc, first); |
| list_add_tail(&desc->desc_node, &first->descs_list); |
| } |
| |
| first->tx_dma_desc.flags = flags; |
| first->xfer_size = len; |
| |
| return &first->tx_dma_desc; |
| } |
| |
| static struct at_xdmac_desc *at_xdmac_memset_create_desc(struct dma_chan *chan, |
| struct at_xdmac_chan *atchan, |
| dma_addr_t dst_addr, |
| size_t len, |
| int value) |
| { |
| struct at_xdmac_desc *desc; |
| unsigned long flags; |
| size_t ublen; |
| u32 dwidth; |
| char pattern; |
| /* |
| * WARNING: The channel configuration is set here since there is no |
| * dmaengine_slave_config call in this case. Moreover we don't know the |
| * direction, it involves we can't dynamically set the source and dest |
| * interface so we have to use the same one. Only interface 0 allows EBI |
| * access. Hopefully we can access DDR through both ports (at least on |
| * SAMA5D4x), so we can use the same interface for source and dest, |
| * that solves the fact we don't know the direction. |
| * ERRATA: Even if useless for memory transfers, the PERID has to not |
| * match the one of another channel. If not, it could lead to spurious |
| * flag status. |
| * For SAMA7G5x case, the SIF and DIF fields are no longer used. |
| * Thus, no need to have the SIF/DIF interfaces here. |
| * For SAMA5D4x and SAMA5D2x the SIF and DIF are already configured as |
| * zero. |
| */ |
| u32 chan_cc = AT_XDMAC_CC_PERID(0x7f) |
| | AT_XDMAC_CC_DAM_UBS_AM |
| | AT_XDMAC_CC_SAM_INCREMENTED_AM |
| | AT_XDMAC_CC_MBSIZE_SIXTEEN |
| | AT_XDMAC_CC_MEMSET_HW_MODE |
| | AT_XDMAC_CC_TYPE_MEM_TRAN; |
| |
| dwidth = at_xdmac_align_width(chan, dst_addr); |
| |
| if (len >= (AT_XDMAC_MBR_UBC_UBLEN_MAX << dwidth)) { |
| dev_err(chan2dev(chan), |
| "%s: Transfer too large, aborting...\n", |
| __func__); |
| return NULL; |
| } |
| |
| spin_lock_irqsave(&atchan->lock, flags); |
| desc = at_xdmac_get_desc(atchan); |
| spin_unlock_irqrestore(&atchan->lock, flags); |
| if (!desc) { |
| dev_err(chan2dev(chan), "can't get descriptor\n"); |
| return NULL; |
| } |
| |
| chan_cc |= AT_XDMAC_CC_DWIDTH(dwidth); |
| |
| /* Only the first byte of value is to be used according to dmaengine */ |
| pattern = (char)value; |
| |
| ublen = len >> dwidth; |
| |
| desc->lld.mbr_da = dst_addr; |
| desc->lld.mbr_ds = (pattern << 24) | |
| (pattern << 16) | |
| (pattern << 8) | |
| pattern; |
| desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV3 |
| | AT_XDMAC_MBR_UBC_NDEN |
| | AT_XDMAC_MBR_UBC_NSEN |
| | ublen; |
| desc->lld.mbr_cfg = chan_cc; |
| |
| dev_dbg(chan2dev(chan), |
| "%s: lld: mbr_da=%pad, mbr_ds=0x%08x, mbr_ubc=0x%08x, mbr_cfg=0x%08x\n", |
| __func__, &desc->lld.mbr_da, desc->lld.mbr_ds, desc->lld.mbr_ubc, |
| desc->lld.mbr_cfg); |
| |
| return desc; |
| } |
| |
| static struct dma_async_tx_descriptor * |
| at_xdmac_prep_dma_memset(struct dma_chan *chan, dma_addr_t dest, int value, |
| size_t len, unsigned long flags) |
| { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| struct at_xdmac_desc *desc; |
| |
| dev_dbg(chan2dev(chan), "%s: dest=%pad, len=%zu, pattern=0x%x, flags=0x%lx\n", |
| __func__, &dest, len, value, flags); |
| |
| if (unlikely(!len)) |
| return NULL; |
| |
| desc = at_xdmac_memset_create_desc(chan, atchan, dest, len, value); |
| list_add_tail(&desc->desc_node, &desc->descs_list); |
| |
| desc->tx_dma_desc.cookie = -EBUSY; |
| desc->tx_dma_desc.flags = flags; |
| desc->xfer_size = len; |
| |
| return &desc->tx_dma_desc; |
| } |
| |
| static struct dma_async_tx_descriptor * |
| at_xdmac_prep_dma_memset_sg(struct dma_chan *chan, struct scatterlist *sgl, |
| unsigned int sg_len, int value, |
| unsigned long flags) |
| { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| struct at_xdmac_desc *desc, *pdesc = NULL, |
| *ppdesc = NULL, *first = NULL; |
| struct scatterlist *sg, *psg = NULL, *ppsg = NULL; |
| size_t stride = 0, pstride = 0, len = 0; |
| int i; |
| |
| if (!sgl) |
| return NULL; |
| |
| dev_dbg(chan2dev(chan), "%s: sg_len=%d, value=0x%x, flags=0x%lx\n", |
| __func__, sg_len, value, flags); |
| |
| /* Prepare descriptors. */ |
| for_each_sg(sgl, sg, sg_len, i) { |
| dev_dbg(chan2dev(chan), "%s: dest=%pad, len=%d, pattern=0x%x, flags=0x%lx\n", |
| __func__, &sg_dma_address(sg), sg_dma_len(sg), |
| value, flags); |
| desc = at_xdmac_memset_create_desc(chan, atchan, |
| sg_dma_address(sg), |
| sg_dma_len(sg), |
| value); |
| if (!desc && first) |
| list_splice_tail_init(&first->descs_list, |
| &atchan->free_descs_list); |
| |
| if (!first) |
| first = desc; |
| |
| /* Update our strides */ |
| pstride = stride; |
| if (psg) |
| stride = sg_dma_address(sg) - |
| (sg_dma_address(psg) + sg_dma_len(psg)); |
| |
| /* |
| * The scatterlist API gives us only the address and |
| * length of each elements. |
| * |
| * Unfortunately, we don't have the stride, which we |
| * will need to compute. |
| * |
| * That make us end up in a situation like this one: |
| * len stride len stride len |
| * +-------+ +-------+ +-------+ |
| * | N-2 | | N-1 | | N | |
| * +-------+ +-------+ +-------+ |
| * |
| * We need all these three elements (N-2, N-1 and N) |
| * to actually take the decision on whether we need to |
| * queue N-1 or reuse N-2. |
| * |
| * We will only consider N if it is the last element. |
| */ |
| if (ppdesc && pdesc) { |
| if ((stride == pstride) && |
| (sg_dma_len(ppsg) == sg_dma_len(psg))) { |
| dev_dbg(chan2dev(chan), |
| "%s: desc 0x%p can be merged with desc 0x%p\n", |
| __func__, pdesc, ppdesc); |
| |
| /* |
| * Increment the block count of the |
| * N-2 descriptor |
| */ |
| at_xdmac_increment_block_count(chan, ppdesc); |
| ppdesc->lld.mbr_dus = stride; |
| |
| /* |
| * Put back the N-1 descriptor in the |
| * free descriptor list |
| */ |
| list_add_tail(&pdesc->desc_node, |
| &atchan->free_descs_list); |
| |
| /* |
| * Make our N-1 descriptor pointer |
| * point to the N-2 since they were |
| * actually merged. |
| */ |
| pdesc = ppdesc; |
| |
| /* |
| * Rule out the case where we don't have |
| * pstride computed yet (our second sg |
| * element) |
| * |
| * We also want to catch the case where there |
| * would be a negative stride, |
| */ |
| } else if (pstride || |
| sg_dma_address(sg) < sg_dma_address(psg)) { |
| /* |
| * Queue the N-1 descriptor after the |
| * N-2 |
| */ |
| at_xdmac_queue_desc(chan, ppdesc, pdesc); |
| |
| /* |
| * Add the N-1 descriptor to the list |
| * of the descriptors used for this |
| * transfer |
| */ |
| list_add_tail(&desc->desc_node, |
| &first->descs_list); |
| dev_dbg(chan2dev(chan), |
| "%s: add desc 0x%p to descs_list 0x%p\n", |
| __func__, desc, first); |
| } |
| } |
| |
| /* |
| * If we are the last element, just see if we have the |
| * same size than the previous element. |
| * |
| * If so, we can merge it with the previous descriptor |
| * since we don't care about the stride anymore. |
| */ |
| if ((i == (sg_len - 1)) && |
| sg_dma_len(psg) == sg_dma_len(sg)) { |
| dev_dbg(chan2dev(chan), |
| "%s: desc 0x%p can be merged with desc 0x%p\n", |
| __func__, desc, pdesc); |
| |
| /* |
| * Increment the block count of the N-1 |
| * descriptor |
| */ |
| at_xdmac_increment_block_count(chan, pdesc); |
| pdesc->lld.mbr_dus = stride; |
| |
| /* |
| * Put back the N descriptor in the free |
| * descriptor list |
| */ |
| list_add_tail(&desc->desc_node, |
| &atchan->free_descs_list); |
| } |
| |
| /* Update our descriptors */ |
| ppdesc = pdesc; |
| pdesc = desc; |
| |
| /* Update our scatter pointers */ |
| ppsg = psg; |
| psg = sg; |
| |
| len += sg_dma_len(sg); |
| } |
| |
| first->tx_dma_desc.cookie = -EBUSY; |
| first->tx_dma_desc.flags = flags; |
| first->xfer_size = len; |
| |
| return &first->tx_dma_desc; |
| } |
| |
| static enum dma_status |
| at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, |
| struct dma_tx_state *txstate) |
| { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device); |
| struct at_xdmac_desc *desc, *_desc, *iter; |
| struct list_head *descs_list; |
| enum dma_status ret; |
| int residue, retry; |
| u32 cur_nda, check_nda, cur_ubc, mask, value; |
| u8 dwidth = 0; |
| unsigned long flags; |
| bool initd; |
| |
| ret = dma_cookie_status(chan, cookie, txstate); |
| if (ret == DMA_COMPLETE) |
| return ret; |
| |
| if (!txstate) |
| return ret; |
| |
| spin_lock_irqsave(&atchan->lock, flags); |
| |
| desc = list_first_entry(&atchan->xfers_list, struct at_xdmac_desc, xfer_node); |
| |
| /* |
| * If the transfer has not been started yet, don't need to compute the |
| * residue, it's the transfer length. |
| */ |
| if (!desc->active_xfer) { |
| dma_set_residue(txstate, desc->xfer_size); |
| goto spin_unlock; |
| } |
| |
| residue = desc->xfer_size; |
| /* |
| * Flush FIFO: only relevant when the transfer is source peripheral |
| * synchronized. Flush is needed before reading CUBC because data in |
| * the FIFO are not reported by CUBC. Reporting a residue of the |
| * transfer length while we have data in FIFO can cause issue. |
| * Usecase: atmel USART has a timeout which means I have received |
| * characters but there is no more character received for a while. On |
| * timeout, it requests the residue. If the data are in the DMA FIFO, |
| * we will return a residue of the transfer length. It means no data |
| * received. If an application is waiting for these data, it will hang |
| * since we won't have another USART timeout without receiving new |
| * data. |
| */ |
| mask = AT_XDMAC_CC_TYPE | AT_XDMAC_CC_DSYNC; |
| value = AT_XDMAC_CC_TYPE_PER_TRAN | AT_XDMAC_CC_DSYNC_PER2MEM; |
| if ((desc->lld.mbr_cfg & mask) == value) { |
| at_xdmac_write(atxdmac, atxdmac->layout->gswf, atchan->mask); |
| while (!(at_xdmac_chan_read(atchan, AT_XDMAC_CIS) & AT_XDMAC_CIS_FIS)) |
| cpu_relax(); |
| } |
| |
| /* |
| * The easiest way to compute the residue should be to pause the DMA |
| * but doing this can lead to miss some data as some devices don't |
| * have FIFO. |
| * We need to read several registers because: |
| * - DMA is running therefore a descriptor change is possible while |
| * reading these registers |
| * - When the block transfer is done, the value of the CUBC register |
| * is set to its initial value until the fetch of the next descriptor. |
| * This value will corrupt the residue calculation so we have to skip |
| * it. |
| * |
| * INITD -------- ------------ |
| * |____________________| |
| * _______________________ _______________ |
| * NDA @desc2 \/ @desc3 |
| * _______________________/\_______________ |
| * __________ ___________ _______________ |
| * CUBC 0 \/ MAX desc1 \/ MAX desc2 |
| * __________/\___________/\_______________ |
| * |
| * Since descriptors are aligned on 64 bits, we can assume that |
| * the update of NDA and CUBC is atomic. |
| * Memory barriers are used to ensure the read order of the registers. |
| * A max number of retries is set because unlikely it could never ends. |
| */ |
| for (retry = 0; retry < AT_XDMAC_RESIDUE_MAX_RETRIES; retry++) { |
| check_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc; |
| rmb(); |
| cur_ubc = at_xdmac_chan_read(atchan, AT_XDMAC_CUBC); |
| rmb(); |
| initd = !!(at_xdmac_chan_read(atchan, AT_XDMAC_CC) & AT_XDMAC_CC_INITD); |
| rmb(); |
| cur_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc; |
| rmb(); |
| |
| if ((check_nda == cur_nda) && initd) |
| break; |
| } |
| |
| if (unlikely(retry >= AT_XDMAC_RESIDUE_MAX_RETRIES)) { |
| ret = DMA_ERROR; |
| goto spin_unlock; |
| } |
| |
| /* |
| * Flush FIFO: only relevant when the transfer is source peripheral |
| * synchronized. Another flush is needed here because CUBC is updated |
| * when the controller sends the data write command. It can lead to |
| * report data that are not written in the memory or the device. The |
| * FIFO flush ensures that data are really written. |
| */ |
| if ((desc->lld.mbr_cfg & mask) == value) { |
| at_xdmac_write(atxdmac, atxdmac->layout->gswf, atchan->mask); |
| while (!(at_xdmac_chan_read(atchan, AT_XDMAC_CIS) & AT_XDMAC_CIS_FIS)) |
| cpu_relax(); |
| } |
| |
| /* |
| * Remove size of all microblocks already transferred and the current |
| * one. Then add the remaining size to transfer of the current |
| * microblock. |
| */ |
| descs_list = &desc->descs_list; |
| list_for_each_entry_safe(iter, _desc, descs_list, desc_node) { |
| dwidth = at_xdmac_get_dwidth(iter->lld.mbr_cfg); |
| residue -= (iter->lld.mbr_ubc & 0xffffff) << dwidth; |
| if ((iter->lld.mbr_nda & 0xfffffffc) == cur_nda) { |
| desc = iter; |
| break; |
| } |
| } |
| residue += cur_ubc << dwidth; |
| |
| dma_set_residue(txstate, residue); |
| |
| dev_dbg(chan2dev(chan), |
| "%s: desc=0x%p, tx_dma_desc.phys=%pad, tx_status=%d, cookie=%d, residue=%d\n", |
| __func__, desc, &desc->tx_dma_desc.phys, ret, cookie, residue); |
| |
| spin_unlock: |
| spin_unlock_irqrestore(&atchan->lock, flags); |
| return ret; |
| } |
| |
| static void at_xdmac_advance_work(struct at_xdmac_chan *atchan) |
| { |
| struct at_xdmac_desc *desc; |
| |
| /* |
| * If channel is enabled, do nothing, advance_work will be triggered |
| * after the interruption. |
| */ |
| if (at_xdmac_chan_is_enabled(atchan) || list_empty(&atchan->xfers_list)) |
| return; |
| |
| desc = list_first_entry(&atchan->xfers_list, struct at_xdmac_desc, |
| xfer_node); |
| dev_vdbg(chan2dev(&atchan->chan), "%s: desc 0x%p\n", __func__, desc); |
| if (!desc->active_xfer) |
| at_xdmac_start_xfer(atchan, desc); |
| } |
| |
| static void at_xdmac_handle_cyclic(struct at_xdmac_chan *atchan) |
| { |
| struct at_xdmac_desc *desc; |
| struct dma_async_tx_descriptor *txd; |
| |
| spin_lock_irq(&atchan->lock); |
| dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08x\n", |
| __func__, atchan->irq_status); |
| if (list_empty(&atchan->xfers_list)) { |
| spin_unlock_irq(&atchan->lock); |
| return; |
| } |
| desc = list_first_entry(&atchan->xfers_list, struct at_xdmac_desc, |
| xfer_node); |
| spin_unlock_irq(&atchan->lock); |
| txd = &desc->tx_dma_desc; |
| if (txd->flags & DMA_PREP_INTERRUPT) |
| dmaengine_desc_get_callback_invoke(txd, NULL); |
| } |
| |
| /* Called with atchan->lock held. */ |
| static void at_xdmac_handle_error(struct at_xdmac_chan *atchan) |
| { |
| struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device); |
| struct at_xdmac_desc *bad_desc; |
| |
| /* |
| * The descriptor currently at the head of the active list is |
| * broken. Since we don't have any way to report errors, we'll |
| * just have to scream loudly and try to continue with other |
| * descriptors queued (if any). |
| */ |
| if (atchan->irq_status & AT_XDMAC_CIS_RBEIS) |
| dev_err(chan2dev(&atchan->chan), "read bus error!!!"); |
| if (atchan->irq_status & AT_XDMAC_CIS_WBEIS) |
| dev_err(chan2dev(&atchan->chan), "write bus error!!!"); |
| if (atchan->irq_status & AT_XDMAC_CIS_ROIS) |
| dev_err(chan2dev(&atchan->chan), "request overflow error!!!"); |
| |
| /* Channel must be disabled first as it's not done automatically */ |
| at_xdmac_write(atxdmac, AT_XDMAC_GD, atchan->mask); |
| while (at_xdmac_read(atxdmac, AT_XDMAC_GS) & atchan->mask) |
| cpu_relax(); |
| |
| bad_desc = list_first_entry(&atchan->xfers_list, |
| struct at_xdmac_desc, |
| xfer_node); |
| |
| /* Print bad descriptor's details if needed */ |
| dev_dbg(chan2dev(&atchan->chan), |
| "%s: lld: mbr_sa=%pad, mbr_da=%pad, mbr_ubc=0x%08x\n", |
| __func__, &bad_desc->lld.mbr_sa, &bad_desc->lld.mbr_da, |
| bad_desc->lld.mbr_ubc); |
| |
| /* Then continue with usual descriptor management */ |
| } |
| |
| static void at_xdmac_tasklet(struct tasklet_struct *t) |
| { |
| struct at_xdmac_chan *atchan = from_tasklet(atchan, t, tasklet); |
| struct at_xdmac_desc *desc; |
| struct dma_async_tx_descriptor *txd; |
| u32 error_mask; |
| |
| if (at_xdmac_chan_is_cyclic(atchan)) |
| return at_xdmac_handle_cyclic(atchan); |
| |
| error_mask = AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS | |
| AT_XDMAC_CIS_ROIS; |
| |
| spin_lock_irq(&atchan->lock); |
| |
| dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08x\n", |
| __func__, atchan->irq_status); |
| |
| if (!(atchan->irq_status & AT_XDMAC_CIS_LIS) && |
| !(atchan->irq_status & error_mask)) { |
| spin_unlock_irq(&atchan->lock); |
| return; |
| } |
| |
| if (atchan->irq_status & error_mask) |
| at_xdmac_handle_error(atchan); |
| |
| desc = list_first_entry(&atchan->xfers_list, struct at_xdmac_desc, |
| xfer_node); |
| dev_vdbg(chan2dev(&atchan->chan), "%s: desc 0x%p\n", __func__, desc); |
| if (!desc->active_xfer) { |
| dev_err(chan2dev(&atchan->chan), "Xfer not active: exiting"); |
| spin_unlock_irq(&atchan->lock); |
| return; |
| } |
| |
| txd = &desc->tx_dma_desc; |
| dma_cookie_complete(txd); |
| /* Remove the transfer from the transfer list. */ |
| list_del(&desc->xfer_node); |
| spin_unlock_irq(&atchan->lock); |
| |
| if (txd->flags & DMA_PREP_INTERRUPT) |
| dmaengine_desc_get_callback_invoke(txd, NULL); |
| |
| dma_run_dependencies(txd); |
| |
| spin_lock_irq(&atchan->lock); |
| /* Move the xfer descriptors into the free descriptors list. */ |
| list_splice_tail_init(&desc->descs_list, &atchan->free_descs_list); |
| at_xdmac_advance_work(atchan); |
| spin_unlock_irq(&atchan->lock); |
| } |
| |
| static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id) |
| { |
| struct at_xdmac *atxdmac = (struct at_xdmac *)dev_id; |
| struct at_xdmac_chan *atchan; |
| u32 imr, status, pending; |
| u32 chan_imr, chan_status; |
| int i, ret = IRQ_NONE; |
| |
| do { |
| imr = at_xdmac_read(atxdmac, AT_XDMAC_GIM); |
| status = at_xdmac_read(atxdmac, AT_XDMAC_GIS); |
| pending = status & imr; |
| |
| dev_vdbg(atxdmac->dma.dev, |
| "%s: status=0x%08x, imr=0x%08x, pending=0x%08x\n", |
| __func__, status, imr, pending); |
| |
| if (!pending) |
| break; |
| |
| /* We have to find which channel has generated the interrupt. */ |
| for (i = 0; i < atxdmac->dma.chancnt; i++) { |
| if (!((1 << i) & pending)) |
| continue; |
| |
| atchan = &atxdmac->chan[i]; |
| chan_imr = at_xdmac_chan_read(atchan, AT_XDMAC_CIM); |
| chan_status = at_xdmac_chan_read(atchan, AT_XDMAC_CIS); |
| atchan->irq_status = chan_status & chan_imr; |
| dev_vdbg(atxdmac->dma.dev, |
| "%s: chan%d: imr=0x%x, status=0x%x\n", |
| __func__, i, chan_imr, chan_status); |
| dev_vdbg(chan2dev(&atchan->chan), |
| "%s: CC=0x%08x CNDA=0x%08x, CNDC=0x%08x, CSA=0x%08x, CDA=0x%08x, CUBC=0x%08x\n", |
| __func__, |
| at_xdmac_chan_read(atchan, AT_XDMAC_CC), |
| at_xdmac_chan_read(atchan, AT_XDMAC_CNDA), |
| at_xdmac_chan_read(atchan, AT_XDMAC_CNDC), |
| at_xdmac_chan_read(atchan, AT_XDMAC_CSA), |
| at_xdmac_chan_read(atchan, AT_XDMAC_CDA), |
| at_xdmac_chan_read(atchan, AT_XDMAC_CUBC)); |
| |
| if (atchan->irq_status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS)) |
| at_xdmac_write(atxdmac, AT_XDMAC_GD, atchan->mask); |
| |
| tasklet_schedule(&atchan->tasklet); |
| ret = IRQ_HANDLED; |
| } |
| |
| } while (pending); |
| |
| return ret; |
| } |
| |
| static void at_xdmac_issue_pending(struct dma_chan *chan) |
| { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| unsigned long flags; |
| |
| dev_dbg(chan2dev(&atchan->chan), "%s\n", __func__); |
| |
| spin_lock_irqsave(&atchan->lock, flags); |
| at_xdmac_advance_work(atchan); |
| spin_unlock_irqrestore(&atchan->lock, flags); |
| |
| return; |
| } |
| |
| static int at_xdmac_device_config(struct dma_chan *chan, |
| struct dma_slave_config *config) |
| { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| int ret; |
| unsigned long flags; |
| |
| dev_dbg(chan2dev(chan), "%s\n", __func__); |
| |
| spin_lock_irqsave(&atchan->lock, flags); |
| ret = at_xdmac_set_slave_config(chan, config); |
| spin_unlock_irqrestore(&atchan->lock, flags); |
| |
| return ret; |
| } |
| |
| static int at_xdmac_device_pause(struct dma_chan *chan) |
| { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device); |
| unsigned long flags; |
| |
| dev_dbg(chan2dev(chan), "%s\n", __func__); |
| |
| if (test_and_set_bit(AT_XDMAC_CHAN_IS_PAUSED, &atchan->status)) |
| return 0; |
| |
| spin_lock_irqsave(&atchan->lock, flags); |
| at_xdmac_write(atxdmac, atxdmac->layout->grws, atchan->mask); |
| while (at_xdmac_chan_read(atchan, AT_XDMAC_CC) |
| & (AT_XDMAC_CC_WRIP | AT_XDMAC_CC_RDIP)) |
| cpu_relax(); |
| spin_unlock_irqrestore(&atchan->lock, flags); |
| |
| return 0; |
| } |
| |
| static int at_xdmac_device_resume(struct dma_chan *chan) |
| { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device); |
| unsigned long flags; |
| |
| dev_dbg(chan2dev(chan), "%s\n", __func__); |
| |
| spin_lock_irqsave(&atchan->lock, flags); |
| if (!at_xdmac_chan_is_paused(atchan)) { |
| spin_unlock_irqrestore(&atchan->lock, flags); |
| return 0; |
| } |
| |
| at_xdmac_write(atxdmac, atxdmac->layout->grwr, atchan->mask); |
| clear_bit(AT_XDMAC_CHAN_IS_PAUSED, &atchan->status); |
| spin_unlock_irqrestore(&atchan->lock, flags); |
| |
| return 0; |
| } |
| |
| static int at_xdmac_device_terminate_all(struct dma_chan *chan) |
| { |
| struct at_xdmac_desc *desc, *_desc; |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device); |
| unsigned long flags; |
| |
| dev_dbg(chan2dev(chan), "%s\n", __func__); |
| |
| spin_lock_irqsave(&atchan->lock, flags); |
| at_xdmac_write(atxdmac, AT_XDMAC_GD, atchan->mask); |
| while (at_xdmac_read(atxdmac, AT_XDMAC_GS) & atchan->mask) |
| cpu_relax(); |
| |
| /* Cancel all pending transfers. */ |
| list_for_each_entry_safe(desc, _desc, &atchan->xfers_list, xfer_node) { |
| list_del(&desc->xfer_node); |
| list_splice_tail_init(&desc->descs_list, |
| &atchan->free_descs_list); |
| } |
| |
| clear_bit(AT_XDMAC_CHAN_IS_PAUSED, &atchan->status); |
| clear_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status); |
| spin_unlock_irqrestore(&atchan->lock, flags); |
| |
| return 0; |
| } |
| |
| static int at_xdmac_alloc_chan_resources(struct dma_chan *chan) |
| { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| struct at_xdmac_desc *desc; |
| int i; |
| |
| if (at_xdmac_chan_is_enabled(atchan)) { |
| dev_err(chan2dev(chan), |
| "can't allocate channel resources (channel enabled)\n"); |
| return -EIO; |
| } |
| |
| if (!list_empty(&atchan->free_descs_list)) { |
| dev_err(chan2dev(chan), |
| "can't allocate channel resources (channel not free from a previous use)\n"); |
| return -EIO; |
| } |
| |
| for (i = 0; i < init_nr_desc_per_channel; i++) { |
| desc = at_xdmac_alloc_desc(chan, GFP_KERNEL); |
| if (!desc) { |
| dev_warn(chan2dev(chan), |
| "only %d descriptors have been allocated\n", i); |
| break; |
| } |
| list_add_tail(&desc->desc_node, &atchan->free_descs_list); |
| } |
| |
| dma_cookie_init(chan); |
| |
| dev_dbg(chan2dev(chan), "%s: allocated %d descriptors\n", __func__, i); |
| |
| return i; |
| } |
| |
| static void at_xdmac_free_chan_resources(struct dma_chan *chan) |
| { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| struct at_xdmac *atxdmac = to_at_xdmac(chan->device); |
| struct at_xdmac_desc *desc, *_desc; |
| |
| list_for_each_entry_safe(desc, _desc, &atchan->free_descs_list, desc_node) { |
| dev_dbg(chan2dev(chan), "%s: freeing descriptor %p\n", __func__, desc); |
| list_del(&desc->desc_node); |
| dma_pool_free(atxdmac->at_xdmac_desc_pool, desc, desc->tx_dma_desc.phys); |
| } |
| |
| return; |
| } |
| |
| static void at_xdmac_axi_config(struct platform_device *pdev) |
| { |
| struct at_xdmac *atxdmac = (struct at_xdmac *)platform_get_drvdata(pdev); |
| bool dev_m2m = false; |
| u32 dma_requests; |
| |
| if (!atxdmac->layout->axi_config) |
| return; /* Not supported */ |
| |
| if (!of_property_read_u32(pdev->dev.of_node, "dma-requests", |
| &dma_requests)) { |
| dev_info(&pdev->dev, "controller in mem2mem mode.\n"); |
| dev_m2m = true; |
| } |
| |
| if (dev_m2m) { |
| at_xdmac_write(atxdmac, AT_XDMAC_GCFG, AT_XDMAC_GCFG_M2M); |
| at_xdmac_write(atxdmac, AT_XDMAC_GWAC, AT_XDMAC_GWAC_M2M); |
| } else { |
| at_xdmac_write(atxdmac, AT_XDMAC_GCFG, AT_XDMAC_GCFG_P2M); |
| at_xdmac_write(atxdmac, AT_XDMAC_GWAC, AT_XDMAC_GWAC_P2M); |
| } |
| } |
| |
| static int __maybe_unused atmel_xdmac_prepare(struct device *dev) |
| { |
| struct at_xdmac *atxdmac = dev_get_drvdata(dev); |
| struct dma_chan *chan, *_chan; |
| |
| list_for_each_entry_safe(chan, _chan, &atxdmac->dma.channels, device_node) { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| |
| /* Wait for transfer completion, except in cyclic case. */ |
| if (at_xdmac_chan_is_enabled(atchan) && !at_xdmac_chan_is_cyclic(atchan)) |
| return -EAGAIN; |
| } |
| return 0; |
| } |
| |
| static int __maybe_unused atmel_xdmac_suspend(struct device *dev) |
| { |
| struct at_xdmac *atxdmac = dev_get_drvdata(dev); |
| struct dma_chan *chan, *_chan; |
| |
| list_for_each_entry_safe(chan, _chan, &atxdmac->dma.channels, device_node) { |
| struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan); |
| |
| atchan->save_cc = at_xdmac_chan_read(atchan, AT_XDMAC_CC); |
| if (at_xdmac_chan_is_cyclic(atchan)) { |
| if (!at_xdmac_chan_is_paused(atchan)) |
| at_xdmac_device_pause(chan); |
| atchan->save_cim = at_xdmac_chan_read(atchan, AT_XDMAC_CIM); |
| atchan->save_cnda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA); |
| atchan->save_cndc = at_xdmac_chan_read(atchan, AT_XDMAC_CNDC); |
| } |
| } |
| atxdmac->save_gim = at_xdmac_read(atxdmac, AT_XDMAC_GIM); |
| |
| at_xdmac_off(atxdmac); |
| clk_disable_unprepare(atxdmac->clk); |
| return 0; |
| } |
| |
| static int __maybe_unused atmel_xdmac_resume(struct device *dev) |
| { |
| struct at_xdmac *atxdmac = dev_get_drvdata(dev); |
| struct at_xdmac_chan *atchan; |
| struct dma_chan *chan, *_chan; |
| struct platform_device *pdev = container_of(dev, struct platform_device, dev); |
| int i; |
| int ret; |
| |
| ret = clk_prepare_enable(atxdmac->clk); |
| if (ret) |
| return ret; |
| |
| at_xdmac_axi_config(pdev); |
| |
| /* Clear pending interrupts. */ |
| for (i = 0; i < atxdmac->dma.chancnt; i++) { |
| atchan = &atxdmac->chan[i]; |
| while (at_xdmac_chan_read(atchan, AT_XDMAC_CIS)) |
| cpu_relax(); |
| } |
| |
| at_xdmac_write(atxdmac, AT_XDMAC_GIE, atxdmac->save_gim); |
| list_for_each_entry_safe(chan, _chan, &atxdmac->dma.channels, device_node) { |
| atchan = to_at_xdmac_chan(chan); |
| at_xdmac_chan_write(atchan, AT_XDMAC_CC, atchan->save_cc); |
| if (at_xdmac_chan_is_cyclic(atchan)) { |
| if (at_xdmac_chan_is_paused(atchan)) |
| at_xdmac_device_resume(chan); |
| at_xdmac_chan_write(atchan, AT_XDMAC_CNDA, atchan->save_cnda); |
| at_xdmac_chan_write(atchan, AT_XDMAC_CNDC, atchan->save_cndc); |
| at_xdmac_chan_write(atchan, AT_XDMAC_CIE, atchan->save_cim); |
| wmb(); |
| at_xdmac_write(atxdmac, AT_XDMAC_GE, atchan->mask); |
| } |
| } |
| return 0; |
| } |
| |
| static int at_xdmac_probe(struct platform_device *pdev) |
| { |
| struct at_xdmac *atxdmac; |
| int irq, nr_channels, i, ret; |
| void __iomem *base; |
| u32 reg; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| /* |
| * Read number of xdmac channels, read helper function can't be used |
| * since atxdmac is not yet allocated and we need to know the number |
| * of channels to do the allocation. |
| */ |
| reg = readl_relaxed(base + AT_XDMAC_GTYPE); |
| nr_channels = AT_XDMAC_NB_CH(reg); |
| if (nr_channels > AT_XDMAC_MAX_CHAN) { |
| dev_err(&pdev->dev, "invalid number of channels (%u)\n", |
| nr_channels); |
| return -EINVAL; |
| } |
| |
| atxdmac = devm_kzalloc(&pdev->dev, |
| struct_size(atxdmac, chan, nr_channels), |
| GFP_KERNEL); |
| if (!atxdmac) { |
| dev_err(&pdev->dev, "can't allocate at_xdmac structure\n"); |
| return -ENOMEM; |
| } |
| |
| atxdmac->regs = base; |
| atxdmac->irq = irq; |
| |
| atxdmac->layout = of_device_get_match_data(&pdev->dev); |
| if (!atxdmac->layout) |
| return -ENODEV; |
| |
| atxdmac->clk = devm_clk_get(&pdev->dev, "dma_clk"); |
| if (IS_ERR(atxdmac->clk)) { |
| dev_err(&pdev->dev, "can't get dma_clk\n"); |
| return PTR_ERR(atxdmac->clk); |
| } |
| |
| /* Do not use dev res to prevent races with tasklet */ |
| ret = request_irq(atxdmac->irq, at_xdmac_interrupt, 0, "at_xdmac", atxdmac); |
| if (ret) { |
| dev_err(&pdev->dev, "can't request irq\n"); |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(atxdmac->clk); |
| if (ret) { |
| dev_err(&pdev->dev, "can't prepare or enable clock\n"); |
| goto err_free_irq; |
| } |
| |
| atxdmac->at_xdmac_desc_pool = |
| dmam_pool_create(dev_name(&pdev->dev), &pdev->dev, |
| sizeof(struct at_xdmac_desc), 4, 0); |
| if (!atxdmac->at_xdmac_desc_pool) { |
| dev_err(&pdev->dev, "no memory for descriptors dma pool\n"); |
| ret = -ENOMEM; |
| goto err_clk_disable; |
| } |
| |
| dma_cap_set(DMA_CYCLIC, atxdmac->dma.cap_mask); |
| dma_cap_set(DMA_INTERLEAVE, atxdmac->dma.cap_mask); |
| dma_cap_set(DMA_MEMCPY, atxdmac->dma.cap_mask); |
| dma_cap_set(DMA_MEMSET, atxdmac->dma.cap_mask); |
| dma_cap_set(DMA_MEMSET_SG, atxdmac->dma.cap_mask); |
| dma_cap_set(DMA_SLAVE, atxdmac->dma.cap_mask); |
| /* |
| * Without DMA_PRIVATE the driver is not able to allocate more than |
| * one channel, second allocation fails in private_candidate. |
| */ |
| dma_cap_set(DMA_PRIVATE, atxdmac->dma.cap_mask); |
| atxdmac->dma.dev = &pdev->dev; |
| atxdmac->dma.device_alloc_chan_resources = at_xdmac_alloc_chan_resources; |
| atxdmac->dma.device_free_chan_resources = at_xdmac_free_chan_resources; |
| atxdmac->dma.device_tx_status = at_xdmac_tx_status; |
| atxdmac->dma.device_issue_pending = at_xdmac_issue_pending; |
| atxdmac->dma.device_prep_dma_cyclic = at_xdmac_prep_dma_cyclic; |
| atxdmac->dma.device_prep_interleaved_dma = at_xdmac_prep_interleaved; |
| atxdmac->dma.device_prep_dma_memcpy = at_xdmac_prep_dma_memcpy; |
| atxdmac->dma.device_prep_dma_memset = at_xdmac_prep_dma_memset; |
| atxdmac->dma.device_prep_dma_memset_sg = at_xdmac_prep_dma_memset_sg; |
| atxdmac->dma.device_prep_slave_sg = at_xdmac_prep_slave_sg; |
| atxdmac->dma.device_config = at_xdmac_device_config; |
| atxdmac->dma.device_pause = at_xdmac_device_pause; |
| atxdmac->dma.device_resume = at_xdmac_device_resume; |
| atxdmac->dma.device_terminate_all = at_xdmac_device_terminate_all; |
| atxdmac->dma.src_addr_widths = AT_XDMAC_DMA_BUSWIDTHS; |
| atxdmac->dma.dst_addr_widths = AT_XDMAC_DMA_BUSWIDTHS; |
| atxdmac->dma.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); |
| atxdmac->dma.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; |
| |
| /* Disable all chans and interrupts. */ |
| at_xdmac_off(atxdmac); |
| |
| /* Init channels. */ |
| INIT_LIST_HEAD(&atxdmac->dma.channels); |
| for (i = 0; i < nr_channels; i++) { |
| struct at_xdmac_chan *atchan = &atxdmac->chan[i]; |
| |
| atchan->chan.device = &atxdmac->dma; |
| list_add_tail(&atchan->chan.device_node, |
| &atxdmac->dma.channels); |
| |
| atchan->ch_regs = at_xdmac_chan_reg_base(atxdmac, i); |
| atchan->mask = 1 << i; |
| |
| spin_lock_init(&atchan->lock); |
| INIT_LIST_HEAD(&atchan->xfers_list); |
| INIT_LIST_HEAD(&atchan->free_descs_list); |
| tasklet_setup(&atchan->tasklet, at_xdmac_tasklet); |
| |
| /* Clear pending interrupts. */ |
| while (at_xdmac_chan_read(atchan, AT_XDMAC_CIS)) |
| cpu_relax(); |
| } |
| platform_set_drvdata(pdev, atxdmac); |
| |
| ret = dma_async_device_register(&atxdmac->dma); |
| if (ret) { |
| dev_err(&pdev->dev, "fail to register DMA engine device\n"); |
| goto err_clk_disable; |
| } |
| |
| ret = of_dma_controller_register(pdev->dev.of_node, |
| at_xdmac_xlate, atxdmac); |
| if (ret) { |
| dev_err(&pdev->dev, "could not register of dma controller\n"); |
| goto err_dma_unregister; |
| } |
| |
| dev_info(&pdev->dev, "%d channels, mapped at 0x%p\n", |
| nr_channels, atxdmac->regs); |
| |
| at_xdmac_axi_config(pdev); |
| |
| return 0; |
| |
| err_dma_unregister: |
| dma_async_device_unregister(&atxdmac->dma); |
| err_clk_disable: |
| clk_disable_unprepare(atxdmac->clk); |
| err_free_irq: |
| free_irq(atxdmac->irq, atxdmac); |
| return ret; |
| } |
| |
| static int at_xdmac_remove(struct platform_device *pdev) |
| { |
| struct at_xdmac *atxdmac = (struct at_xdmac *)platform_get_drvdata(pdev); |
| int i; |
| |
| at_xdmac_off(atxdmac); |
| of_dma_controller_free(pdev->dev.of_node); |
| dma_async_device_unregister(&atxdmac->dma); |
| clk_disable_unprepare(atxdmac->clk); |
| |
| free_irq(atxdmac->irq, atxdmac); |
| |
| for (i = 0; i < atxdmac->dma.chancnt; i++) { |
| struct at_xdmac_chan *atchan = &atxdmac->chan[i]; |
| |
| tasklet_kill(&atchan->tasklet); |
| at_xdmac_free_chan_resources(&atchan->chan); |
| } |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops __maybe_unused atmel_xdmac_dev_pm_ops = { |
| .prepare = atmel_xdmac_prepare, |
| SET_LATE_SYSTEM_SLEEP_PM_OPS(atmel_xdmac_suspend, atmel_xdmac_resume) |
| }; |
| |
| static const struct of_device_id atmel_xdmac_dt_ids[] = { |
| { |
| .compatible = "atmel,sama5d4-dma", |
| .data = &at_xdmac_sama5d4_layout, |
| }, { |
| .compatible = "microchip,sama7g5-dma", |
| .data = &at_xdmac_sama7g5_layout, |
| }, { |
| /* sentinel */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(of, atmel_xdmac_dt_ids); |
| |
| static struct platform_driver at_xdmac_driver = { |
| .probe = at_xdmac_probe, |
| .remove = at_xdmac_remove, |
| .driver = { |
| .name = "at_xdmac", |
| .of_match_table = of_match_ptr(atmel_xdmac_dt_ids), |
| .pm = pm_ptr(&atmel_xdmac_dev_pm_ops), |
| } |
| }; |
| |
| static int __init at_xdmac_init(void) |
| { |
| return platform_driver_register(&at_xdmac_driver); |
| } |
| subsys_initcall(at_xdmac_init); |
| |
| static void __exit at_xdmac_exit(void) |
| { |
| platform_driver_unregister(&at_xdmac_driver); |
| } |
| module_exit(at_xdmac_exit); |
| |
| MODULE_DESCRIPTION("Atmel Extended DMA Controller driver"); |
| MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>"); |
| MODULE_LICENSE("GPL"); |