[media] wm8775: Revert changeset fcb9757333 to avoid a regression
It seems that cx88 and ivtv use wm8775 on some different modes. The
patch that added support for a board with wm8775 broke ivtv boards with
this device. As we're too close to release 2.6.37, let's just revert
it.
Reported-by: Andy Walls <awalls@md.metrocast.net>
Reported-by: Eric Sharkey <eric@lisaneric.org>
Reported-by: Auric <auric@aanet.com.au>
Reported by: David Gesswein <djg@pdp8online.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index 4aaa47c..54b7fcd 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -40,7 +40,6 @@
#include <sound/control.h>
#include <sound/initval.h>
#include <sound/tlv.h>
-#include <media/wm8775.h>
#include "cx88.h"
#include "cx88-reg.h"
@@ -587,47 +586,26 @@
int left, right, v, b;
int changed = 0;
u32 old;
- struct v4l2_control client_ctl;
-
- /* Pass volume & balance onto any WM8775 */
- if (value->value.integer.value[0] >= value->value.integer.value[1]) {
- v = value->value.integer.value[0] << 10;
- b = value->value.integer.value[0] ?
- (0x8000 * value->value.integer.value[1]) / value->value.integer.value[0] :
- 0x8000;
- } else {
- v = value->value.integer.value[1] << 10;
- b = value->value.integer.value[1] ?
- 0xffff - (0x8000 * value->value.integer.value[0]) / value->value.integer.value[1] :
- 0x8000;
- }
- client_ctl.value = v;
- client_ctl.id = V4L2_CID_AUDIO_VOLUME;
- call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
-
- client_ctl.value = b;
- client_ctl.id = V4L2_CID_AUDIO_BALANCE;
- call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
left = value->value.integer.value[0] & 0x3f;
right = value->value.integer.value[1] & 0x3f;
b = right - left;
if (b < 0) {
- v = 0x3f - left;
- b = (-b) | 0x40;
+ v = 0x3f - left;
+ b = (-b) | 0x40;
} else {
- v = 0x3f - right;
+ v = 0x3f - right;
}
/* Do we really know this will always be called with IRQs on? */
spin_lock_irq(&chip->reg_lock);
old = cx_read(AUD_VOL_CTL);
if (v != (old & 0x3f)) {
- cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, (old & ~0x3f) | v);
- changed = 1;
+ cx_write(AUD_VOL_CTL, (old & ~0x3f) | v);
+ changed = 1;
}
- if ((cx_read(AUD_BAL_CTL) & 0x7f) != b) {
- cx_write(AUD_BAL_CTL, b);
- changed = 1;
+ if (cx_read(AUD_BAL_CTL) != b) {
+ cx_write(AUD_BAL_CTL, b);
+ changed = 1;
}
spin_unlock_irq(&chip->reg_lock);
@@ -640,7 +618,7 @@
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
SNDRV_CTL_ELEM_ACCESS_TLV_READ,
- .name = "Analog-TV Volume",
+ .name = "Playback Volume",
.info = snd_cx88_volume_info,
.get = snd_cx88_volume_get,
.put = snd_cx88_volume_put,
@@ -671,14 +649,7 @@
vol = cx_read(AUD_VOL_CTL);
if (value->value.integer.value[0] != !(vol & bit)) {
vol ^= bit;
- cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, vol);
- /* Pass mute onto any WM8775 */
- if ((1<<6) == bit) {
- struct v4l2_control client_ctl;
- client_ctl.value = 0 != (vol & bit);
- client_ctl.id = V4L2_CID_AUDIO_MUTE;
- call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
- }
+ cx_write(AUD_VOL_CTL, vol);
ret = 1;
}
spin_unlock_irq(&chip->reg_lock);
@@ -687,7 +658,7 @@
static const struct snd_kcontrol_new snd_cx88_dac_switch = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Audio-Out Switch",
+ .name = "Playback Switch",
.info = snd_ctl_boolean_mono_info,
.get = snd_cx88_switch_get,
.put = snd_cx88_switch_put,
@@ -696,49 +667,13 @@
static const struct snd_kcontrol_new snd_cx88_source_switch = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Analog-TV Switch",
+ .name = "Capture Switch",
.info = snd_ctl_boolean_mono_info,
.get = snd_cx88_switch_get,
.put = snd_cx88_switch_put,
.private_value = (1<<6),
};
-static int snd_cx88_alc_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *value)
-{
- snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol);
- struct cx88_core *core = chip->core;
- struct v4l2_control client_ctl;
-
- client_ctl.id = V4L2_CID_AUDIO_LOUDNESS;
- call_hw(core, WM8775_GID, core, g_ctrl, &client_ctl);
- value->value.integer.value[0] = client_ctl.value ? 1 : 0;
-
- return 0;
-}
-
-static int snd_cx88_alc_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *value)
-{
- snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol);
- struct cx88_core *core = chip->core;
- struct v4l2_control client_ctl;
-
- client_ctl.value = 0 != value->value.integer.value[0];
- client_ctl.id = V4L2_CID_AUDIO_LOUDNESS;
- call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
-
- return 0;
-}
-
-static struct snd_kcontrol_new snd_cx88_alc_switch = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Line-In ALC Switch",
- .info = snd_ctl_boolean_mono_info,
- .get = snd_cx88_alc_get,
- .put = snd_cx88_alc_put,
-};
-
/****************************************************************************
Basic Flow for Sound Devices
****************************************************************************/
@@ -860,7 +795,6 @@
{
struct snd_card *card;
snd_cx88_card_t *chip;
- struct v4l2_subdev *sd;
int err;
if (devno >= SNDRV_CARDS)
@@ -896,15 +830,6 @@
if (err < 0)
goto error;
- /* If there's a wm8775 then add a Line-In ALC switch */
- list_for_each_entry(sd, &chip->core->v4l2_dev.subdevs, list) {
- if (WM8775_GID == sd->grp_id) {
- snd_ctl_add(card, snd_ctl_new1(&snd_cx88_alc_switch,
- chip));
- break;
- }
- }
-
strcpy (card->driver, "CX88x");
sprintf(card->shortname, "Conexant CX%x", pci->device);
sprintf(card->longname, "%s at %#llx",
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 9b9e169..0ccc2af 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1007,15 +1007,22 @@
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
+ .audio_chip = V4L2_IDENT_WM8775,
.input = {{
.type = CX88_VMUX_DVB,
.vmux = 0,
+ /* 2: Line-In */
+ .audioroute = 2,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
+ /* 2: Line-In */
+ .audioroute = 2,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
+ /* 2: Line-In */
+ .audioroute = 2,
}},
.mpeg = CX88_MPEG_DVB,
},
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 62cea95..d9249e5 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -40,7 +40,6 @@
#include "cx88.h"
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
-#include <media/wm8775.h>
MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
@@ -977,7 +976,6 @@
const struct cx88_ctrl *c = NULL;
u32 value,mask;
int i;
- struct v4l2_control client_ctl;
for (i = 0; i < CX8800_CTLS; i++) {
if (cx8800_ctls[i].v.id == ctl->id) {
@@ -991,27 +989,6 @@
ctl->value = c->v.minimum;
if (ctl->value > c->v.maximum)
ctl->value = c->v.maximum;
-
- /* Pass changes onto any WM8775 */
- client_ctl.id = ctl->id;
- switch (ctl->id) {
- case V4L2_CID_AUDIO_MUTE:
- client_ctl.value = ctl->value;
- break;
- case V4L2_CID_AUDIO_VOLUME:
- client_ctl.value = (ctl->value) ?
- (0x90 + ctl->value) << 8 : 0;
- break;
- case V4L2_CID_AUDIO_BALANCE:
- client_ctl.value = ctl->value << 9;
- break;
- default:
- client_ctl.id = 0;
- break;
- }
- if (client_ctl.id)
- call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
-
mask=c->mask;
switch (ctl->id) {
case V4L2_CID_AUDIO_BALANCE:
@@ -1558,9 +1535,7 @@
if (c->id < V4L2_CID_BASE ||
c->id >= V4L2_CID_LASTP1)
return -EINVAL;
- if (c->id == V4L2_CID_AUDIO_MUTE ||
- c->id == V4L2_CID_AUDIO_VOLUME ||
- c->id == V4L2_CID_AUDIO_BALANCE) {
+ if (c->id == V4L2_CID_AUDIO_MUTE) {
for (i = 0; i < CX8800_CTLS; i++) {
if (cx8800_ctls[i].v.id == c->id)
break;
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index e8c732e..c9981e7 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -398,19 +398,17 @@
return container_of(v4l2_dev, struct cx88_core, v4l2_dev);
}
-#define call_hw(core, grpid, o, f, args...) \
+#define call_all(core, o, f, args...) \
do { \
if (!core->i2c_rc) { \
if (core->gate_ctrl) \
core->gate_ctrl(core, 1); \
- v4l2_device_call_all(&core->v4l2_dev, grpid, o, f, ##args); \
+ v4l2_device_call_all(&core->v4l2_dev, 0, o, f, ##args); \
if (core->gate_ctrl) \
core->gate_ctrl(core, 0); \
} \
} while (0)
-#define call_all(core, o, f, args...) call_hw(core, 0, o, f, ##args)
-
struct cx8800_dev;
struct cx8802_dev;
diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c
index 1355256..fe8ef64 100644
--- a/drivers/media/video/wm8775.c
+++ b/drivers/media/video/wm8775.c
@@ -35,7 +35,6 @@
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-ctrls.h>
-#include <media/wm8775.h>
MODULE_DESCRIPTION("wm8775 driver");
MODULE_AUTHOR("Ulf Eklund, Hans Verkuil");
@@ -51,16 +50,10 @@
TOT_REGS
};
-#define ALC_HOLD 0x85 /* R17: use zero cross detection, ALC hold time 42.6 ms */
-#define ALC_EN 0x100 /* R17: ALC enable */
-
struct wm8775_state {
struct v4l2_subdev sd;
struct v4l2_ctrl_handler hdl;
struct v4l2_ctrl *mute;
- struct v4l2_ctrl *vol;
- struct v4l2_ctrl *bal;
- struct v4l2_ctrl *loud;
u8 input; /* Last selected input (0-0xf) */
};
@@ -92,30 +85,6 @@
return -1;
}
-static void wm8775_set_audio(struct v4l2_subdev *sd, int quietly)
-{
- struct wm8775_state *state = to_state(sd);
- u8 vol_l, vol_r;
- int muted = 0 != state->mute->val;
- u16 volume = (u16)state->vol->val;
- u16 balance = (u16)state->bal->val;
-
- /* normalize ( 65535 to 0 -> 255 to 0 (+24dB to -103dB) ) */
- vol_l = (min(65536 - balance, 32768) * volume) >> 23;
- vol_r = (min(balance, (u16)32768) * volume) >> 23;
-
- /* Mute */
- if (muted || quietly)
- wm8775_write(sd, R21, 0x0c0 | state->input);
-
- wm8775_write(sd, R14, vol_l | 0x100); /* 0x100= Left channel ADC zero cross enable */
- wm8775_write(sd, R15, vol_r | 0x100); /* 0x100= Right channel ADC zero cross enable */
-
- /* Un-mute */
- if (!muted)
- wm8775_write(sd, R21, state->input);
-}
-
static int wm8775_s_routing(struct v4l2_subdev *sd,
u32 input, u32 output, u32 config)
{
@@ -133,26 +102,25 @@
state->input = input;
if (!v4l2_ctrl_g_ctrl(state->mute))
return 0;
- if (!v4l2_ctrl_g_ctrl(state->vol))
- return 0;
- if (!v4l2_ctrl_g_ctrl(state->bal))
- return 0;
- wm8775_set_audio(sd, 1);
+ wm8775_write(sd, R21, 0x0c0);
+ wm8775_write(sd, R14, 0x1d4);
+ wm8775_write(sd, R15, 0x1d4);
+ wm8775_write(sd, R21, 0x100 + state->input);
return 0;
}
static int wm8775_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = to_sd(ctrl);
+ struct wm8775_state *state = to_state(sd);
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_BALANCE:
- wm8775_set_audio(sd, 0);
- return 0;
- case V4L2_CID_AUDIO_LOUDNESS:
- wm8775_write(sd, R17, (ctrl->val ? ALC_EN : 0) | ALC_HOLD);
+ wm8775_write(sd, R21, 0x0c0);
+ wm8775_write(sd, R14, 0x1d4);
+ wm8775_write(sd, R15, 0x1d4);
+ if (!ctrl->val)
+ wm8775_write(sd, R21, 0x100 + state->input);
return 0;
}
return -EINVAL;
@@ -176,7 +144,16 @@
static int wm8775_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq)
{
- wm8775_set_audio(sd, 0);
+ struct wm8775_state *state = to_state(sd);
+
+ /* If I remove this, then it can happen that I have no
+ sound the first time I tune from static to a valid channel.
+ It's difficult to reproduce and is almost certainly related
+ to the zero cross detect circuit. */
+ wm8775_write(sd, R21, 0x0c0);
+ wm8775_write(sd, R14, 0x1d4);
+ wm8775_write(sd, R15, 0x1d4);
+ wm8775_write(sd, R21, 0x100 + state->input);
return 0;
}
@@ -226,7 +203,6 @@
{
struct wm8775_state *state;
struct v4l2_subdev *sd;
- int err;
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
@@ -240,21 +216,15 @@
return -ENOMEM;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &wm8775_ops);
- sd->grp_id = WM8775_GID; /* subdev group id */
state->input = 2;
- v4l2_ctrl_handler_init(&state->hdl, 4);
+ v4l2_ctrl_handler_init(&state->hdl, 1);
state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
- state->vol = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
- V4L2_CID_AUDIO_VOLUME, 0, 65535, (65535+99)/100, 0xCF00); /* 0dB*/
- state->bal = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
- V4L2_CID_AUDIO_BALANCE, 0, 65535, (65535+99)/100, 32768);
- state->loud = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
- V4L2_CID_AUDIO_LOUDNESS, 0, 1, 1, 1);
sd->ctrl_handler = &state->hdl;
- err = state->hdl.error;
- if (err) {
+ if (state->hdl.error) {
+ int err = state->hdl.error;
+
v4l2_ctrl_handler_free(&state->hdl);
kfree(state);
return err;
@@ -266,25 +236,29 @@
wm8775_write(sd, R23, 0x000);
/* Disable zero cross detect timeout */
wm8775_write(sd, R7, 0x000);
- /* HPF enable, I2S mode, 24-bit */
- wm8775_write(sd, R11, 0x022);
+ /* Left justified, 24-bit mode */
+ wm8775_write(sd, R11, 0x021);
/* Master mode, clock ratio 256fs */
wm8775_write(sd, R12, 0x102);
/* Powered up */
wm8775_write(sd, R13, 0x000);
- /* ALC stereo, ALC target level -5dB FS, ALC max gain +8dB */
- wm8775_write(sd, R16, 0x1bb);
- /* Set ALC mode and hold time */
- wm8775_write(sd, R17, (state->loud->val ? ALC_EN : 0) | ALC_HOLD);
+ /* ADC gain +2.5dB, enable zero cross */
+ wm8775_write(sd, R14, 0x1d4);
+ /* ADC gain +2.5dB, enable zero cross */
+ wm8775_write(sd, R15, 0x1d4);
+ /* ALC Stereo, ALC target level -1dB FS max gain +8dB */
+ wm8775_write(sd, R16, 0x1bf);
+ /* Enable gain control, use zero cross detection,
+ ALC hold time 42.6 ms */
+ wm8775_write(sd, R17, 0x185);
/* ALC gain ramp up delay 34 s, ALC gain ramp down delay 33 ms */
wm8775_write(sd, R18, 0x0a2);
/* Enable noise gate, threshold -72dBfs */
wm8775_write(sd, R19, 0x005);
- /* Transient window 4ms, ALC min gain -5dB */
- wm8775_write(sd, R20, 0x0fb);
-
- wm8775_set_audio(sd, 1); /* set volume/mute/mux */
-
+ /* Transient window 4ms, lower PGA gain limit -1dB */
+ wm8775_write(sd, R20, 0x07a);
+ /* LRBOTH = 1, use input 2. */
+ wm8775_write(sd, R21, 0x102);
return 0;
}
diff --git a/include/media/wm8775.h b/include/media/wm8775.h
index a1c4d41..60739c5 100644
--- a/include/media/wm8775.h
+++ b/include/media/wm8775.h
@@ -32,7 +32,4 @@
#define WM8775_AIN3 4
#define WM8775_AIN4 8
-/* subdev group ID */
-#define WM8775_GID (1 << 0)
-
#endif
